3D-printing/Configurations
1
0
Fork 0
mirror of https://github.com/MarlinFirmware/Configurations.git synced 2025-08-05 21:14:06 -06:00
Code Issues Projects Releases Packages Wiki Activity Actions

🚸 Improve Ender5 Plus (#739)

Browse source
This commit is contained in:
Alex 2022-05-28 23:20:21 +02:00 • committed by GitHub
parent 1881008eb5
commit 40f3bbc112
No known key found for this signature in database
GPG key ID: 4AEE18F83AFDEB23
2 changed files with 32 additions and 32 deletions
Download patch file Download diff file Expand all files Collapse all files

26
config/examples/Creality/Ender-5 Plus/Configuration.h
View file

@ -723,7 +723,7 @@
* heater. If your configuration is significantly different than this and you don't understand
* the issues involved, don't use bed PID until someone else verifies that your hardware works.
*/
//#define PIDTEMPBED
#define PIDTEMPBED
//#define BED_LIMIT_SWITCHING
@ -744,9 +744,9 @@
// 120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
// from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10)
#define DEFAULT_bedKp 10.00
#define DEFAULT_bedKi .023
#define DEFAULT_bedKd 305.4
#define DEFAULT_bedKp 481.83
#define DEFAULT_bedKi 69.20
#define DEFAULT_bedKd 838.75
// FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles.
#endif // PIDTEMPBED
@ -823,7 +823,7 @@
* Note: For Bowden Extruders make this large enough to allow load/unload.
*/
#define PREVENT_LENGTHY_EXTRUDE
#define EXTRUDE_MAXLENGTH 750
#define EXTRUDE_MAXLENGTH 1500
//===========================================================================
//======================== Thermal Runaway Protection =======================
@ -1288,7 +1288,7 @@
* O-- FRONT --+
*/
// Note on Creality Ender-5 Plus: Z offset must be adjusted (M851) every time once the probe has been loosen/unmounted.
#define NOZZLE_TO_PROBE_OFFSET { -44, -5, -3.0 }
#define NOZZLE_TO_PROBE_OFFSET { -44, -5, -2.8 }
// Most probes should stay away from the edges of the bed, but
// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
@ -1298,10 +1298,10 @@
#define XY_PROBE_FEEDRATE (133*60)
// Feedrate (mm/min) for the first approach when double-probing (MULTIPLE_PROBING == 2)
#define Z_PROBE_FEEDRATE_FAST (15*60)
#define Z_PROBE_FEEDRATE_FAST (4*60)
// Feedrate (mm/min) for the "accurate" probe of each point
#define Z_PROBE_FEEDRATE_SLOW (Z_PROBE_FEEDRATE_FAST / 4)
#define Z_PROBE_FEEDRATE_SLOW (Z_PROBE_FEEDRATE_FAST / 2)
/**
* Probe Activation Switch
@ -1377,7 +1377,7 @@
#define Z_PROBE_OFFSET_RANGE_MAX 20
// Enable the M48 repeatability test to test probe accuracy
//#define Z_MIN_PROBE_REPEATABILITY_TEST
#define Z_MIN_PROBE_REPEATABILITY_TEST
// Before deploy/stow pause for user confirmation
//#define PAUSE_BEFORE_DEPLOY_STOW
@ -1687,13 +1687,13 @@
* these options to restore the prior leveling state or to always enable
* leveling immediately after G28.
*/
#define RESTORE_LEVELING_AFTER_G28
//#define ENABLE_LEVELING_AFTER_G28
//#define RESTORE_LEVELING_AFTER_G28
#define ENABLE_LEVELING_AFTER_G28
/**
* Auto-leveling needs preheating
*/
//#define PREHEAT_BEFORE_LEVELING
#define PREHEAT_BEFORE_LEVELING
#if ENABLED(PREHEAT_BEFORE_LEVELING)
#define LEVELING_NOZZLE_TEMP 120 // (°C) Only applies to E0 at this time
#define LEVELING_BED_TEMP 50
@ -1890,7 +1890,7 @@
#endif
// Homing speeds (linear=mm/min, rotational=°/min)
#define HOMING_FEEDRATE_MM_M { (90*60), (90*60), (15*60) }
#define HOMING_FEEDRATE_MM_M { (50*60), (50*60), (4*60) }
// Validate that endstops are triggered on homing moves
#define VALIDATE_HOMING_ENDSTOPS