Fix some comments

config/default/Configuration_adv.h

@@ -1829,7 +1829,7 @@
 
 // @section motion
 
-// The number of lineear moves that can be in the planner at once.
+// The number of linear moves that can be in the planner at once.
 // The value of BLOCK_BUFFER_SIZE must be a power of 2 (e.g. 8, 16, 32)
 #if BOTH(SDSUPPORT, DIRECT_STEPPING)
   #define BLOCK_BUFFER_SIZE  8

config/examples/3DFabXYZ/Migbot/Configuration_adv.h

@@ -1831,7 +1831,7 @@
 
 // @section motion
 
-// The number of lineear moves that can be in the planner at once.
+// The number of linear moves that can be in the planner at once.
 // The value of BLOCK_BUFFER_SIZE must be a power of 2 (e.g. 8, 16, 32)
 #if BOTH(SDSUPPORT, DIRECT_STEPPING)
   #define BLOCK_BUFFER_SIZE  8

config/examples/ADIMLab/Gantry v1/Configuration_adv.h

@@ -1831,7 +1831,7 @@
 
 // @section motion
 
-// The number of lineear moves that can be in the planner at once.
+// The number of linear moves that can be in the planner at once.
 // The value of BLOCK_BUFFER_SIZE must be a power of 2 (e.g. 8, 16, 32)
 #if BOTH(SDSUPPORT, DIRECT_STEPPING)
   #define BLOCK_BUFFER_SIZE  8

config/examples/ADIMLab/Gantry v2/Configuration_adv.h

@@ -1831,7 +1831,7 @@
 
 // @section motion
 
-// The number of lineear moves that can be in the planner at once.
+// The number of linear moves that can be in the planner at once.
 // The value of BLOCK_BUFFER_SIZE must be a power of 2 (e.g. 8, 16, 32)
 #if BOTH(SDSUPPORT, DIRECT_STEPPING)
   #define BLOCK_BUFFER_SIZE  8

config/examples/AlephObjects/TAZ4/Configuration_adv.h

@@ -1831,7 +1831,7 @@
 
 // @section motion
 
-// The number of lineear moves that can be in the planner at once.
+// The number of linear moves that can be in the planner at once.
 // The value of BLOCK_BUFFER_SIZE must be a power of 2 (e.g. 8, 16, 32)
 #if BOTH(SDSUPPORT, DIRECT_STEPPING)
   #define BLOCK_BUFFER_SIZE  8

config/examples/Alfawise/U20-bltouch/Configuration_adv.h

@@ -1833,7 +1833,7 @@
 
 // @section motion
 
-// The number of lineear moves that can be in the planner at once.
+// The number of linear moves that can be in the planner at once.
 // The value of BLOCK_BUFFER_SIZE must be a power of 2 (e.g. 8, 16, 32)
 #if BOTH(SDSUPPORT, DIRECT_STEPPING)
   #define BLOCK_BUFFER_SIZE  8

config/examples/Alfawise/U20/Configuration_adv.h

@@ -1832,7 +1832,7 @@
 
 // @section motion
 
-// The number of lineear moves that can be in the planner at once.
+// The number of linear moves that can be in the planner at once.
 // The value of BLOCK_BUFFER_SIZE must be a power of 2 (e.g. 8, 16, 32)
 #if BOTH(SDSUPPORT, DIRECT_STEPPING)
   #define BLOCK_BUFFER_SIZE  8

config/examples/AliExpress/UM2pExt/Configuration_adv.h

@@ -1831,7 +1831,7 @@
 
 // @section motion
 
-// The number of lineear moves that can be in the planner at once.
+// The number of linear moves that can be in the planner at once.
 // The value of BLOCK_BUFFER_SIZE must be a power of 2 (e.g. 8, 16, 32)
 #if BOTH(SDSUPPORT, DIRECT_STEPPING)
   #define BLOCK_BUFFER_SIZE  8

config/examples/Anet/A2/Configuration_adv.h

@@ -1831,7 +1831,7 @@
 
 // @section motion
 
-// The number of lineear moves that can be in the planner at once.
+// The number of linear moves that can be in the planner at once.
 // The value of BLOCK_BUFFER_SIZE must be a power of 2 (e.g. 8, 16, 32)
 #if BOTH(SDSUPPORT, DIRECT_STEPPING)
   #define BLOCK_BUFFER_SIZE  8

config/examples/Anet/A2plus/Configuration_adv.h

@@ -1831,7 +1831,7 @@
 
 // @section motion
 
-// The number of lineear moves that can be in the planner at once.
+// The number of linear moves that can be in the planner at once.
 // The value of BLOCK_BUFFER_SIZE must be a power of 2 (e.g. 8, 16, 32)
 #if BOTH(SDSUPPORT, DIRECT_STEPPING)
   #define BLOCK_BUFFER_SIZE  8

config/examples/Anet/A6/Configuration_adv.h

@@ -1831,7 +1831,7 @@
 
 // @section motion
 
-// The number of lineear moves that can be in the planner at once.
+// The number of linear moves that can be in the planner at once.
 // The value of BLOCK_BUFFER_SIZE must be a power of 2 (e.g. 8, 16, 32)
 #if BOTH(SDSUPPORT, DIRECT_STEPPING)
   #define BLOCK_BUFFER_SIZE  8

config/examples/Anet/A8/Configuration_adv.h

@@ -1831,7 +1831,7 @@
 
 // @section motion
 
-// The number of lineear moves that can be in the planner at once.
+// The number of linear moves that can be in the planner at once.
 // The value of BLOCK_BUFFER_SIZE must be a power of 2 (e.g. 8, 16, 32)
 #if BOTH(SDSUPPORT, DIRECT_STEPPING)
   #define BLOCK_BUFFER_SIZE  8

config/examples/Anet/A8plus/Configuration_adv.h

@@ -1831,7 +1831,7 @@
 
 // @section motion
 
-// The number of lineear moves that can be in the planner at once.
+// The number of linear moves that can be in the planner at once.
 // The value of BLOCK_BUFFER_SIZE must be a power of 2 (e.g. 8, 16, 32)
 #if BOTH(SDSUPPORT, DIRECT_STEPPING)
   #define BLOCK_BUFFER_SIZE  8

config/examples/Anet/E10/Configuration_adv.h

@@ -1831,7 +1831,7 @@
 
 // @section motion
 
-// The number of lineear moves that can be in the planner at once.
+// The number of linear moves that can be in the planner at once.
 // The value of BLOCK_BUFFER_SIZE must be a power of 2 (e.g. 8, 16, 32)
 #if BOTH(SDSUPPORT, DIRECT_STEPPING)
   #define BLOCK_BUFFER_SIZE  8

config/examples/Anet/E16/Configuration_adv.h

@@ -1831,7 +1831,7 @@
 
 // @section motion
 
-// The number of lineear moves that can be in the planner at once.
+// The number of linear moves that can be in the planner at once.
 // The value of BLOCK_BUFFER_SIZE must be a power of 2 (e.g. 8, 16, 32)
 #if BOTH(SDSUPPORT, DIRECT_STEPPING)
   #define BLOCK_BUFFER_SIZE  8

config/examples/AnyCubic/Mega Zero/Configuration_adv.h

@@ -1831,7 +1831,7 @@
 
 // @section motion
 
-// The number of lineear moves that can be in the planner at once.
+// The number of linear moves that can be in the planner at once.
 // The value of BLOCK_BUFFER_SIZE must be a power of 2 (e.g. 8, 16, 32)
 #if BOTH(SDSUPPORT, DIRECT_STEPPING)
   #define BLOCK_BUFFER_SIZE  8

config/examples/AnyCubic/i3/Configuration_adv.h

@@ -1831,7 +1831,7 @@
 
 // @section motion
 
-// The number of lineear moves that can be in the planner at once.
+// The number of linear moves that can be in the planner at once.
 // The value of BLOCK_BUFFER_SIZE must be a power of 2 (e.g. 8, 16, 32)
 #if BOTH(SDSUPPORT, DIRECT_STEPPING)
   #define BLOCK_BUFFER_SIZE  8

config/examples/ArmEd/Configuration_adv.h

@@ -1835,7 +1835,7 @@
 
 // @section motion
 
-// The number of lineear moves that can be in the planner at once.
+// The number of linear moves that can be in the planner at once.
 // The value of BLOCK_BUFFER_SIZE must be a power of 2 (e.g. 8, 16, 32)
 #if BOTH(SDSUPPORT, DIRECT_STEPPING)
   #define BLOCK_BUFFER_SIZE  8

config/examples/Artillery/Genius/Configuration_adv.h

@@ -1831,7 +1831,7 @@
 
 // @section motion
 
-// The number of lineear moves that can be in the planner at once.
+// The number of linear moves that can be in the planner at once.
 // The value of BLOCK_BUFFER_SIZE must be a power of 2 (e.g. 8, 16, 32)
 #if BOTH(SDSUPPORT, DIRECT_STEPPING)
   #define BLOCK_BUFFER_SIZE  8

config/examples/Artillery/Sidewinder X1/Configuration_adv.h

@@ -1831,7 +1831,7 @@
 
 // @section motion
 
-// The number of lineear moves that can be in the planner at once.
+// The number of linear moves that can be in the planner at once.
 // The value of BLOCK_BUFFER_SIZE must be a power of 2 (e.g. 8, 16, 32)
 #if BOTH(SDSUPPORT, DIRECT_STEPPING)
   #define BLOCK_BUFFER_SIZE  8

config/examples/Artillery/Sidewinder X1_0.9_degree_BMG_E3D_V6/Configuration_adv.h

@@ -1831,7 +1831,7 @@
 
 // @section motion
 
-// The number of lineear moves that can be in the planner at once.
+// The number of linear moves that can be in the planner at once.
 // The value of BLOCK_BUFFER_SIZE must be a power of 2 (e.g. 8, 16, 32)
 #if BOTH(SDSUPPORT, DIRECT_STEPPING)
   #define BLOCK_BUFFER_SIZE  8

config/examples/BIBO/TouchX/cyclops/Configuration_adv.h

@@ -1831,7 +1831,7 @@
 
 // @section motion
 
-// The number of lineear moves that can be in the planner at once.
+// The number of linear moves that can be in the planner at once.
 // The value of BLOCK_BUFFER_SIZE must be a power of 2 (e.g. 8, 16, 32)
 #if BOTH(SDSUPPORT, DIRECT_STEPPING)
   #define BLOCK_BUFFER_SIZE  8

config/examples/BIBO/TouchX/default/Configuration_adv.h

@@ -1831,7 +1831,7 @@
 
 // @section motion
 
-// The number of lineear moves that can be in the planner at once.
+// The number of linear moves that can be in the planner at once.
 // The value of BLOCK_BUFFER_SIZE must be a power of 2 (e.g. 8, 16, 32)
 #if BOTH(SDSUPPORT, DIRECT_STEPPING)
   #define BLOCK_BUFFER_SIZE  8

config/examples/BQ/Hephestos/Configuration_adv.h

@@ -1831,7 +1831,7 @@
 
 // @section motion
 
-// The number of lineear moves that can be in the planner at once.
+// The number of linear moves that can be in the planner at once.
 // The value of BLOCK_BUFFER_SIZE must be a power of 2 (e.g. 8, 16, 32)
 #if BOTH(SDSUPPORT, DIRECT_STEPPING)
   #define BLOCK_BUFFER_SIZE  8

config/examples/BQ/Hephestos_2/Configuration_adv.h

@@ -1838,7 +1838,7 @@
 
 // @section motion
 
-// The number of lineear moves that can be in the planner at once.
+// The number of linear moves that can be in the planner at once.
 // The value of BLOCK_BUFFER_SIZE must be a power of 2 (e.g. 8, 16, 32)
 #if BOTH(SDSUPPORT, DIRECT_STEPPING)
   #define BLOCK_BUFFER_SIZE  8

config/examples/BQ/WITBOX/Configuration_adv.h

@@ -1831,7 +1831,7 @@
 
 // @section motion
 
-// The number of lineear moves that can be in the planner at once.
+// The number of linear moves that can be in the planner at once.
 // The value of BLOCK_BUFFER_SIZE must be a power of 2 (e.g. 8, 16, 32)
 #if BOTH(SDSUPPORT, DIRECT_STEPPING)
   #define BLOCK_BUFFER_SIZE  8

config/examples/Cartesio/Configuration_adv.h

@@ -1831,7 +1831,7 @@
 
 // @section motion
 
-// The number of lineear moves that can be in the planner at once.
+// The number of linear moves that can be in the planner at once.
 // The value of BLOCK_BUFFER_SIZE must be a power of 2 (e.g. 8, 16, 32)
 #if BOTH(SDSUPPORT, DIRECT_STEPPING)
   #define BLOCK_BUFFER_SIZE  8

config/examples/Creality/CR-10 V2/Configuration_adv.h

@@ -1834,7 +1834,7 @@
 
 // @section motion
 
-// The number of lineear moves that can be in the planner at once.
+// The number of linear moves that can be in the planner at once.
 // The value of BLOCK_BUFFER_SIZE must be a power of 2 (e.g. 8, 16, 32)
 #if BOTH(SDSUPPORT, DIRECT_STEPPING)
   #define BLOCK_BUFFER_SIZE  8

config/examples/Creality/CR-10/Configuration_adv.h

@@ -1831,7 +1831,7 @@
 
 // @section motion
 
-// The number of lineear moves that can be in the planner at once.
+// The number of linear moves that can be in the planner at once.
 // The value of BLOCK_BUFFER_SIZE must be a power of 2 (e.g. 8, 16, 32)
 #if BOTH(SDSUPPORT, DIRECT_STEPPING)
   #define BLOCK_BUFFER_SIZE  8

config/examples/Creality/CR-10S/Configuration_adv.h

@@ -1831,7 +1831,7 @@
 
 // @section motion
 
-// The number of lineear moves that can be in the planner at once.
+// The number of linear moves that can be in the planner at once.
 // The value of BLOCK_BUFFER_SIZE must be a power of 2 (e.g. 8, 16, 32)
 #if BOTH(SDSUPPORT, DIRECT_STEPPING)
   #define BLOCK_BUFFER_SIZE  8

config/examples/Creality/CR-10_5S/Configuration_adv.h

@@ -1831,7 +1831,7 @@
 
 // @section motion
 
-// The number of lineear moves that can be in the planner at once.
+// The number of linear moves that can be in the planner at once.
 // The value of BLOCK_BUFFER_SIZE must be a power of 2 (e.g. 8, 16, 32)
 #if BOTH(SDSUPPORT, DIRECT_STEPPING)
   #define BLOCK_BUFFER_SIZE  8

config/examples/Creality/CR-10mini/CrealityV1/Configuration_adv.h

@@ -1831,7 +1831,7 @@
 
 // @section motion
 
-// The number of lineear moves that can be in the planner at once.
+// The number of linear moves that can be in the planner at once.
 // The value of BLOCK_BUFFER_SIZE must be a power of 2 (e.g. 8, 16, 32)
 #if BOTH(SDSUPPORT, DIRECT_STEPPING)
   #define BLOCK_BUFFER_SIZE  8

config/examples/Creality/CR-10mini/MEEB-3DP/Configuration_adv.h

@@ -1831,7 +1831,7 @@
 
 // @section motion
 
-// The number of lineear moves that can be in the planner at once.
+// The number of linear moves that can be in the planner at once.
 // The value of BLOCK_BUFFER_SIZE must be a power of 2 (e.g. 8, 16, 32)
 #if BOTH(SDSUPPORT, DIRECT_STEPPING)
   #define BLOCK_BUFFER_SIZE  8

config/examples/Creality/CR-20 Pro/Configuration_adv.h

@@ -1831,7 +1831,7 @@
 
 // @section motion
 
-// The number of lineear moves that can be in the planner at once.
+// The number of linear moves that can be in the planner at once.
 // The value of BLOCK_BUFFER_SIZE must be a power of 2 (e.g. 8, 16, 32)
 #if BOTH(SDSUPPORT, DIRECT_STEPPING)
   #define BLOCK_BUFFER_SIZE  8

config/examples/Creality/CR-20/Configuration_adv.h

@@ -1831,7 +1831,7 @@
 
 // @section motion
 
-// The number of lineear moves that can be in the planner at once.
+// The number of linear moves that can be in the planner at once.
 // The value of BLOCK_BUFFER_SIZE must be a power of 2 (e.g. 8, 16, 32)
 #if BOTH(SDSUPPORT, DIRECT_STEPPING)
   #define BLOCK_BUFFER_SIZE  8

config/examples/Creality/CR-8/Configuration_adv.h

@@ -1831,7 +1831,7 @@
 
 // @section motion
 
-// The number of lineear moves that can be in the planner at once.
+// The number of linear moves that can be in the planner at once.
 // The value of BLOCK_BUFFER_SIZE must be a power of 2 (e.g. 8, 16, 32)
 #if BOTH(SDSUPPORT, DIRECT_STEPPING)
   #define BLOCK_BUFFER_SIZE  8

config/examples/Creality/Ender-2/Configuration_adv.h

@@ -1831,7 +1831,7 @@
 
 // @section motion
 
-// The number of lineear moves that can be in the planner at once.
+// The number of linear moves that can be in the planner at once.
 // The value of BLOCK_BUFFER_SIZE must be a power of 2 (e.g. 8, 16, 32)
 #if BOTH(SDSUPPORT, DIRECT_STEPPING)
   #define BLOCK_BUFFER_SIZE  8

config/examples/Creality/Ender-3 Pro/Configuration_adv.h

@@ -1831,7 +1831,7 @@
 
 // @section motion
 
-// The number of lineear moves that can be in the planner at once.
+// The number of linear moves that can be in the planner at once.
 // The value of BLOCK_BUFFER_SIZE must be a power of 2 (e.g. 8, 16, 32)
 #if BOTH(SDSUPPORT, DIRECT_STEPPING)
   #define BLOCK_BUFFER_SIZE  8

config/examples/Creality/Ender-3 V2/Configuration_adv.h

@@ -1832,7 +1832,7 @@
 
 // @section motion
 
-// The number of lineear moves that can be in the planner at once.
+// The number of linear moves that can be in the planner at once.
 // The value of BLOCK_BUFFER_SIZE must be a power of 2 (e.g. 8, 16, 32)
 #if BOTH(SDSUPPORT, DIRECT_STEPPING)
   #define BLOCK_BUFFER_SIZE  8

config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h

@@ -1833,7 +1833,7 @@
 
 // @section motion
 
-// The number of lineear moves that can be in the planner at once.
+// The number of linear moves that can be in the planner at once.
 // The value of BLOCK_BUFFER_SIZE must be a power of 2 (e.g. 8, 16, 32)
 #if BOTH(SDSUPPORT, DIRECT_STEPPING)
   #define BLOCK_BUFFER_SIZE  8

config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h

@@ -1833,7 +1833,7 @@
 
 // @section motion
 
-// The number of lineear moves that can be in the planner at once.
+// The number of linear moves that can be in the planner at once.
 // The value of BLOCK_BUFFER_SIZE must be a power of 2 (e.g. 8, 16, 32)
 #if BOTH(SDSUPPORT, DIRECT_STEPPING)
   #define BLOCK_BUFFER_SIZE  8

config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h

@@ -1831,7 +1831,7 @@
 
 // @section motion
 
-// The number of lineear moves that can be in the planner at once.
+// The number of linear moves that can be in the planner at once.
 // The value of BLOCK_BUFFER_SIZE must be a power of 2 (e.g. 8, 16, 32)
 #if BOTH(SDSUPPORT, DIRECT_STEPPING)
   #define BLOCK_BUFFER_SIZE  8

config/examples/Creality/Ender-3/CrealityV1/Configuration_adv.h

@@ -1831,7 +1831,7 @@
 
 // @section motion
 
-// The number of lineear moves that can be in the planner at once.
+// The number of linear moves that can be in the planner at once.
 // The value of BLOCK_BUFFER_SIZE must be a power of 2 (e.g. 8, 16, 32)
 #if BOTH(SDSUPPORT, DIRECT_STEPPING)
   #define BLOCK_BUFFER_SIZE  8

config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/BLTouch/Configuration_adv.h

@@ -1831,7 +1831,7 @@
 
 // @section motion
 
-// The number of lineear moves that can be in the planner at once.
+// The number of linear moves that can be in the planner at once.
 // The value of BLOCK_BUFFER_SIZE must be a power of 2 (e.g. 8, 16, 32)
 #if BOTH(SDSUPPORT, DIRECT_STEPPING)
   #define BLOCK_BUFFER_SIZE  8

config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/base/Configuration_adv.h

@@ -1831,7 +1831,7 @@
 
 // @section motion
 
-// The number of lineear moves that can be in the planner at once.
+// The number of linear moves that can be in the planner at once.
 // The value of BLOCK_BUFFER_SIZE must be a power of 2 (e.g. 8, 16, 32)
 #if BOTH(SDSUPPORT, DIRECT_STEPPING)
   #define BLOCK_BUFFER_SIZE  8

config/examples/Creality/Ender-3/FYSETC Cheetah/BLTouch/Configuration_adv.h

@@ -1831,7 +1831,7 @@
 
 // @section motion
 
-// The number of lineear moves that can be in the planner at once.
+// The number of linear moves that can be in the planner at once.
 // The value of BLOCK_BUFFER_SIZE must be a power of 2 (e.g. 8, 16, 32)
 #if BOTH(SDSUPPORT, DIRECT_STEPPING)
   #define BLOCK_BUFFER_SIZE  8

config/examples/Creality/Ender-3/FYSETC Cheetah/base/Configuration_adv.h

@@ -1831,7 +1831,7 @@
 
 // @section motion
 
-// The number of lineear moves that can be in the planner at once.
+// The number of linear moves that can be in the planner at once.
 // The value of BLOCK_BUFFER_SIZE must be a power of 2 (e.g. 8, 16, 32)
 #if BOTH(SDSUPPORT, DIRECT_STEPPING)
   #define BLOCK_BUFFER_SIZE  8

config/examples/Creality/Ender-3/MEEB-3DP/Configuration_adv.h

@@ -1831,7 +1831,7 @@
 
 // @section motion
 
-// The number of lineear moves that can be in the planner at once.
+// The number of linear moves that can be in the planner at once.
 // The value of BLOCK_BUFFER_SIZE must be a power of 2 (e.g. 8, 16, 32)
 #if BOTH(SDSUPPORT, DIRECT_STEPPING)
   #define BLOCK_BUFFER_SIZE  8

config/examples/Creality/Ender-4/Configuration_adv.h

@@ -1831,7 +1831,7 @@
 
 // @section motion
 
-// The number of lineear moves that can be in the planner at once.
+// The number of linear moves that can be in the planner at once.
 // The value of BLOCK_BUFFER_SIZE must be a power of 2 (e.g. 8, 16, 32)
 #if BOTH(SDSUPPORT, DIRECT_STEPPING)
   #define BLOCK_BUFFER_SIZE  8

config/examples/Creality/Ender-5 Pro/Configuration_adv.h

@@ -1831,7 +1831,7 @@
 
 // @section motion
 
-// The number of lineear moves that can be in the planner at once.
+// The number of linear moves that can be in the planner at once.
 // The value of BLOCK_BUFFER_SIZE must be a power of 2 (e.g. 8, 16, 32)
 #if BOTH(SDSUPPORT, DIRECT_STEPPING)
   #define BLOCK_BUFFER_SIZE  8

config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h

@@ -1831,7 +1831,7 @@
 
 // @section motion
 
-// The number of lineear moves that can be in the planner at once.
+// The number of linear moves that can be in the planner at once.
 // The value of BLOCK_BUFFER_SIZE must be a power of 2 (e.g. 8, 16, 32)
 #if BOTH(SDSUPPORT, DIRECT_STEPPING)
   #define BLOCK_BUFFER_SIZE  8

config/examples/Creality/Ender-5/Creality/Configuration_adv.h

@@ -1831,7 +1831,7 @@
 
 // @section motion
 
-// The number of lineear moves that can be in the planner at once.
+// The number of linear moves that can be in the planner at once.
 // The value of BLOCK_BUFFER_SIZE must be a power of 2 (e.g. 8, 16, 32)
 #if BOTH(SDSUPPORT, DIRECT_STEPPING)
   #define BLOCK_BUFFER_SIZE  8

config/examples/Creality/Ender-5_Plus/Configuration_adv.h

@@ -1831,7 +1831,7 @@
 
 // @section motion
 
-// The number of lineear moves that can be in the planner at once.
+// The number of linear moves that can be in the planner at once.
 // The value of BLOCK_BUFFER_SIZE must be a power of 2 (e.g. 8, 16, 32)
 #if BOTH(SDSUPPORT, DIRECT_STEPPING)
   #define BLOCK_BUFFER_SIZE  8

config/examples/Dagoma/Disco Ultimate/Configuration_adv.h

@@ -1831,7 +1831,7 @@
 
 // @section motion
 
-// The number of lineear moves that can be in the planner at once.
+// The number of linear moves that can be in the planner at once.
 // The value of BLOCK_BUFFER_SIZE must be a power of 2 (e.g. 8, 16, 32)
 #if BOTH(SDSUPPORT, DIRECT_STEPPING)
   #define BLOCK_BUFFER_SIZE  8

config/examples/Daycom/3DP-100/Configuration_adv.h

@@ -1831,7 +1831,7 @@
 
 // @section motion
 
-// The number of lineear moves that can be in the planner at once.
+// The number of linear moves that can be in the planner at once.
 // The value of BLOCK_BUFFER_SIZE must be a power of 2 (e.g. 8, 16, 32)
 #if BOTH(SDSUPPORT, DIRECT_STEPPING)
   #define BLOCK_BUFFER_SIZE  8

config/examples/EXP3D/Imprimante multifonction/Configuration_adv.h

@@ -1831,7 +1831,7 @@
 
 // @section motion
 
-// The number of lineear moves that can be in the planner at once.
+// The number of linear moves that can be in the planner at once.
 // The value of BLOCK_BUFFER_SIZE must be a power of 2 (e.g. 8, 16, 32)
 #if BOTH(SDSUPPORT, DIRECT_STEPPING)
   #define BLOCK_BUFFER_SIZE  8

config/examples/Einstart-S/Configuration_adv.h

@@ -1831,7 +1831,7 @@
 
 // @section motion
 
-// The number of lineear moves that can be in the planner at once.
+// The number of linear moves that can be in the planner at once.
 // The value of BLOCK_BUFFER_SIZE must be a power of 2 (e.g. 8, 16, 32)
 #if BOTH(SDSUPPORT, DIRECT_STEPPING)
   #define BLOCK_BUFFER_SIZE  8

config/examples/FYSETC/AIO_II/Configuration_adv.h

@@ -1831,7 +1831,7 @@
 
 // @section motion
 
-// The number of lineear moves that can be in the planner at once.
+// The number of linear moves that can be in the planner at once.
 // The value of BLOCK_BUFFER_SIZE must be a power of 2 (e.g. 8, 16, 32)
 #if BOTH(SDSUPPORT, DIRECT_STEPPING)
   #define BLOCK_BUFFER_SIZE  8

config/examples/FYSETC/F6_13/Configuration_adv.h

@@ -1831,7 +1831,7 @@
 
 // @section motion
 
-// The number of lineear moves that can be in the planner at once.
+// The number of linear moves that can be in the planner at once.
 // The value of BLOCK_BUFFER_SIZE must be a power of 2 (e.g. 8, 16, 32)
 #if BOTH(SDSUPPORT, DIRECT_STEPPING)
   #define BLOCK_BUFFER_SIZE  8

config/examples/FYSETC/S6/Configuration_adv.h

@@ -1831,7 +1831,7 @@
 
 // @section motion
 
-// The number of lineear moves that can be in the planner at once.
+// The number of linear moves that can be in the planner at once.
 // The value of BLOCK_BUFFER_SIZE must be a power of 2 (e.g. 8, 16, 32)
 #if BOTH(SDSUPPORT, DIRECT_STEPPING)
   #define BLOCK_BUFFER_SIZE  8

config/examples/Felix/DUAL/Configuration_adv.h

@@ -1831,7 +1831,7 @@
 
 // @section motion
 
-// The number of lineear moves that can be in the planner at once.
+// The number of linear moves that can be in the planner at once.
 // The value of BLOCK_BUFFER_SIZE must be a power of 2 (e.g. 8, 16, 32)
 #if BOTH(SDSUPPORT, DIRECT_STEPPING)
   #define BLOCK_BUFFER_SIZE  8

config/examples/Felix/Single/Configuration_adv.h

@@ -1831,7 +1831,7 @@
 
 // @section motion
 
-// The number of lineear moves that can be in the planner at once.
+// The number of linear moves that can be in the planner at once.
 // The value of BLOCK_BUFFER_SIZE must be a power of 2 (e.g. 8, 16, 32)
 #if BOTH(SDSUPPORT, DIRECT_STEPPING)
   #define BLOCK_BUFFER_SIZE  8

config/examples/FlashForge/Creator 2X/Configuration_adv.h

@@ -1831,7 +1831,7 @@
 
 // @section motion
 
-// The number of lineear moves that can be in the planner at once.
+// The number of linear moves that can be in the planner at once.
 // The value of BLOCK_BUFFER_SIZE must be a power of 2 (e.g. 8, 16, 32)
 #if BOTH(SDSUPPORT, DIRECT_STEPPING)
   #define BLOCK_BUFFER_SIZE  8

config/examples/FlashForge/CreatorPro/Configuration_adv.h

@@ -1830,7 +1830,7 @@
 
 // @section motion
 
-// The number of lineear moves that can be in the planner at once.
+// The number of linear moves that can be in the planner at once.
 // The value of BLOCK_BUFFER_SIZE must be a power of 2 (e.g. 8, 16, 32)
 #if BOTH(SDSUPPORT, DIRECT_STEPPING)
   #define BLOCK_BUFFER_SIZE  8

config/examples/FlyingBear/P905H/Configuration_adv.h

@@ -1835,7 +1835,7 @@
 
 // @section motion
 
-// The number of lineear moves that can be in the planner at once.
+// The number of linear moves that can be in the planner at once.
 // The value of BLOCK_BUFFER_SIZE must be a power of 2 (e.g. 8, 16, 32)
 #if BOTH(SDSUPPORT, DIRECT_STEPPING)
   #define BLOCK_BUFFER_SIZE  8

config/examples/FolgerTech/i3-2020/Configuration_adv.h

@@ -1831,7 +1831,7 @@
 
 // @section motion
 
-// The number of lineear moves that can be in the planner at once.
+// The number of linear moves that can be in the planner at once.
 // The value of BLOCK_BUFFER_SIZE must be a power of 2 (e.g. 8, 16, 32)
 #if BOTH(SDSUPPORT, DIRECT_STEPPING)
   #define BLOCK_BUFFER_SIZE  8

config/examples/Formbot/Raptor/Configuration_adv.h

@@ -1833,7 +1833,7 @@
 
 // @section motion
 
-// The number of lineear moves that can be in the planner at once.
+// The number of linear moves that can be in the planner at once.
 // The value of BLOCK_BUFFER_SIZE must be a power of 2 (e.g. 8, 16, 32)
 #if BOTH(SDSUPPORT, DIRECT_STEPPING)
   #define BLOCK_BUFFER_SIZE  8

config/examples/Formbot/T_Rex_2+/Configuration_adv.h

@@ -1832,7 +1832,7 @@
 
 // @section motion
 
-// The number of lineear moves that can be in the planner at once.
+// The number of linear moves that can be in the planner at once.
 // The value of BLOCK_BUFFER_SIZE must be a power of 2 (e.g. 8, 16, 32)
 #if BOTH(SDSUPPORT, DIRECT_STEPPING)
   #define BLOCK_BUFFER_SIZE  8

config/examples/Formbot/T_Rex_3/Configuration_adv.h

@@ -1836,7 +1836,7 @@
 
 // @section motion
 
-// The number of lineear moves that can be in the planner at once.
+// The number of linear moves that can be in the planner at once.
 // The value of BLOCK_BUFFER_SIZE must be a power of 2 (e.g. 8, 16, 32)
 #if BOTH(SDSUPPORT, DIRECT_STEPPING)
   #define BLOCK_BUFFER_SIZE  8

config/examples/Geeetech/A10/Configuration_adv.h

@@ -1831,7 +1831,7 @@
 
 // @section motion
 
-// The number of lineear moves that can be in the planner at once.
+// The number of linear moves that can be in the planner at once.
 // The value of BLOCK_BUFFER_SIZE must be a power of 2 (e.g. 8, 16, 32)
 #if BOTH(SDSUPPORT, DIRECT_STEPPING)
   #define BLOCK_BUFFER_SIZE  8

config/examples/Geeetech/A10D/Configuration_adv.h

@@ -1831,7 +1831,7 @@
 
 // @section motion
 
-// The number of lineear moves that can be in the planner at once.
+// The number of linear moves that can be in the planner at once.
 // The value of BLOCK_BUFFER_SIZE must be a power of 2 (e.g. 8, 16, 32)
 #if BOTH(SDSUPPORT, DIRECT_STEPPING)
   #define BLOCK_BUFFER_SIZE  8

config/examples/Geeetech/A10M/Configuration_adv.h

@@ -1831,7 +1831,7 @@
 
 // @section motion
 
-// The number of lineear moves that can be in the planner at once.
+// The number of linear moves that can be in the planner at once.
 // The value of BLOCK_BUFFER_SIZE must be a power of 2 (e.g. 8, 16, 32)
 #if BOTH(SDSUPPORT, DIRECT_STEPPING)
   #define BLOCK_BUFFER_SIZE  8

config/examples/Geeetech/A10T/Configuration_adv.h

@@ -1831,7 +1831,7 @@
 
 // @section motion
 
-// The number of lineear moves that can be in the planner at once.
+// The number of linear moves that can be in the planner at once.
 // The value of BLOCK_BUFFER_SIZE must be a power of 2 (e.g. 8, 16, 32)
 #if BOTH(SDSUPPORT, DIRECT_STEPPING)
   #define BLOCK_BUFFER_SIZE  8

config/examples/Geeetech/A20/Configuration_adv.h

@@ -1831,7 +1831,7 @@
 
 // @section motion
 
-// The number of lineear moves that can be in the planner at once.
+// The number of linear moves that can be in the planner at once.
 // The value of BLOCK_BUFFER_SIZE must be a power of 2 (e.g. 8, 16, 32)
 #if BOTH(SDSUPPORT, DIRECT_STEPPING)
   #define BLOCK_BUFFER_SIZE  8

config/examples/Geeetech/A20M/Configuration_adv.h

@@ -1831,7 +1831,7 @@
 
 // @section motion
 
-// The number of lineear moves that can be in the planner at once.
+// The number of linear moves that can be in the planner at once.
 // The value of BLOCK_BUFFER_SIZE must be a power of 2 (e.g. 8, 16, 32)
 #if BOTH(SDSUPPORT, DIRECT_STEPPING)
   #define BLOCK_BUFFER_SIZE  8

config/examples/Geeetech/A20T/Configuration_adv.h

@@ -1831,7 +1831,7 @@
 
 // @section motion
 
-// The number of lineear moves that can be in the planner at once.
+// The number of linear moves that can be in the planner at once.
 // The value of BLOCK_BUFFER_SIZE must be a power of 2 (e.g. 8, 16, 32)
 #if BOTH(SDSUPPORT, DIRECT_STEPPING)
   #define BLOCK_BUFFER_SIZE  8

config/examples/Geeetech/A30/Configuration_adv.h

@@ -1831,7 +1831,7 @@
 
 // @section motion
 
-// The number of lineear moves that can be in the planner at once.
+// The number of linear moves that can be in the planner at once.
 // The value of BLOCK_BUFFER_SIZE must be a power of 2 (e.g. 8, 16, 32)
 #if BOTH(SDSUPPORT, DIRECT_STEPPING)
   #define BLOCK_BUFFER_SIZE  8

config/examples/Geeetech/D200/Configuration_adv.h

@@ -1831,7 +1831,7 @@
 
 // @section motion
 
-// The number of lineear moves that can be in the planner at once.
+// The number of linear moves that can be in the planner at once.
 // The value of BLOCK_BUFFER_SIZE must be a power of 2 (e.g. 8, 16, 32)
 #if BOTH(SDSUPPORT, DIRECT_STEPPING)
   #define BLOCK_BUFFER_SIZE  8

config/examples/Geeetech/Duplicator5/Configuration_adv.h

@@ -1831,7 +1831,7 @@
 
 // @section motion
 
-// The number of lineear moves that can be in the planner at once.
+// The number of linear moves that can be in the planner at once.
 // The value of BLOCK_BUFFER_SIZE must be a power of 2 (e.g. 8, 16, 32)
 #if BOTH(SDSUPPORT, DIRECT_STEPPING)
   #define BLOCK_BUFFER_SIZE  8

config/examples/Geeetech/E180/Configuration_adv.h

@@ -1831,7 +1831,7 @@
 
 // @section motion
 
-// The number of lineear moves that can be in the planner at once.
+// The number of linear moves that can be in the planner at once.
 // The value of BLOCK_BUFFER_SIZE must be a power of 2 (e.g. 8, 16, 32)
 #if BOTH(SDSUPPORT, DIRECT_STEPPING)
   #define BLOCK_BUFFER_SIZE  8

config/examples/Geeetech/M201/Configuration_adv.h

@@ -1831,7 +1831,7 @@
 
 // @section motion
 
-// The number of lineear moves that can be in the planner at once.
+// The number of linear moves that can be in the planner at once.
 // The value of BLOCK_BUFFER_SIZE must be a power of 2 (e.g. 8, 16, 32)
 #if BOTH(SDSUPPORT, DIRECT_STEPPING)
   #define BLOCK_BUFFER_SIZE  8

config/examples/Geeetech/MeCreator2/Configuration_adv.h

@@ -1830,7 +1830,7 @@
 
 // @section motion
 
-// The number of lineear moves that can be in the planner at once.
+// The number of linear moves that can be in the planner at once.
 // The value of BLOCK_BUFFER_SIZE must be a power of 2 (e.g. 8, 16, 32)
 #if BOTH(SDSUPPORT, DIRECT_STEPPING)
   #define BLOCK_BUFFER_SIZE  8

config/examples/Geeetech/Me_creator/Configuration_adv.h

@@ -1831,7 +1831,7 @@
 
 // @section motion
 
-// The number of lineear moves that can be in the planner at once.
+// The number of linear moves that can be in the planner at once.
 // The value of BLOCK_BUFFER_SIZE must be a power of 2 (e.g. 8, 16, 32)
 #if BOTH(SDSUPPORT, DIRECT_STEPPING)
   #define BLOCK_BUFFER_SIZE  8

config/examples/Geeetech/Me_ducer/Configuration_adv.h

@@ -1831,7 +1831,7 @@
 
 // @section motion
 
-// The number of lineear moves that can be in the planner at once.
+// The number of linear moves that can be in the planner at once.
 // The value of BLOCK_BUFFER_SIZE must be a power of 2 (e.g. 8, 16, 32)
 #if BOTH(SDSUPPORT, DIRECT_STEPPING)
   #define BLOCK_BUFFER_SIZE  8

config/examples/Geeetech/PI3A PRO/Configuration_adv.h

@@ -1831,7 +1831,7 @@
 
 // @section motion
 
-// The number of lineear moves that can be in the planner at once.
+// The number of linear moves that can be in the planner at once.
 // The value of BLOCK_BUFFER_SIZE must be a power of 2 (e.g. 8, 16, 32)
 #if BOTH(SDSUPPORT, DIRECT_STEPPING)
   #define BLOCK_BUFFER_SIZE  8

config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h

@@ -1831,7 +1831,7 @@
 
 // @section motion
 
-// The number of lineear moves that can be in the planner at once.
+// The number of linear moves that can be in the planner at once.
 // The value of BLOCK_BUFFER_SIZE must be a power of 2 (e.g. 8, 16, 32)
 #if BOTH(SDSUPPORT, DIRECT_STEPPING)
   #define BLOCK_BUFFER_SIZE  8

config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h

@@ -1831,7 +1831,7 @@
 
 // @section motion
 
-// The number of lineear moves that can be in the planner at once.
+// The number of linear moves that can be in the planner at once.
 // The value of BLOCK_BUFFER_SIZE must be a power of 2 (e.g. 8, 16, 32)
 #if BOTH(SDSUPPORT, DIRECT_STEPPING)
   #define BLOCK_BUFFER_SIZE  8

config/examples/HMS434/Configuration_adv.h

@@ -1822,7 +1822,7 @@
 
 // @section motion
 
-// The number of lineear moves that can be in the planner at once.
+// The number of linear moves that can be in the planner at once.
 // The value of BLOCK_BUFFER_SIZE must be a power of 2 (e.g. 8, 16, 32)
 #if BOTH(SDSUPPORT, DIRECT_STEPPING)
   #define BLOCK_BUFFER_SIZE  8

config/examples/Infitary/i3-M508/Configuration_adv.h

@@ -1831,7 +1831,7 @@
 
 // @section motion
 
-// The number of lineear moves that can be in the planner at once.
+// The number of linear moves that can be in the planner at once.
 // The value of BLOCK_BUFFER_SIZE must be a power of 2 (e.g. 8, 16, 32)
 #if BOTH(SDSUPPORT, DIRECT_STEPPING)
   #define BLOCK_BUFFER_SIZE  8

config/examples/Intamsys/FunmatHT_4988/Configuration_adv.h

@@ -1831,7 +1831,7 @@
 
 // @section motion
 
-// The number of lineear moves that can be in the planner at once.
+// The number of linear moves that can be in the planner at once.
 // The value of BLOCK_BUFFER_SIZE must be a power of 2 (e.g. 8, 16, 32)
 #if BOTH(SDSUPPORT, DIRECT_STEPPING)
   #define BLOCK_BUFFER_SIZE  8

config/examples/JGAurora/A1/Configuration_adv.h

@@ -1835,7 +1835,7 @@
 
 // @section motion
 
-// The number of lineear moves that can be in the planner at once.
+// The number of linear moves that can be in the planner at once.
 // The value of BLOCK_BUFFER_SIZE must be a power of 2 (e.g. 8, 16, 32)
 #if BOTH(SDSUPPORT, DIRECT_STEPPING)
   #define BLOCK_BUFFER_SIZE  8

config/examples/JGAurora/A5/Configuration_adv.h

@@ -1831,7 +1831,7 @@
 
 // @section motion
 
-// The number of lineear moves that can be in the planner at once.
+// The number of linear moves that can be in the planner at once.
 // The value of BLOCK_BUFFER_SIZE must be a power of 2 (e.g. 8, 16, 32)
 #if BOTH(SDSUPPORT, DIRECT_STEPPING)
   #define BLOCK_BUFFER_SIZE  8

config/examples/JGAurora/A5S/Configuration_adv.h

@@ -1835,7 +1835,7 @@
 
 // @section motion
 
-// The number of lineear moves that can be in the planner at once.
+// The number of linear moves that can be in the planner at once.
 // The value of BLOCK_BUFFER_SIZE must be a power of 2 (e.g. 8, 16, 32)
 #if BOTH(SDSUPPORT, DIRECT_STEPPING)
   #define BLOCK_BUFFER_SIZE  8

config/examples/JGAurora/Magic/Configuration_adv.h

@@ -1831,7 +1831,7 @@
 
 // @section motion
 
-// The number of lineear moves that can be in the planner at once.
+// The number of linear moves that can be in the planner at once.
 // The value of BLOCK_BUFFER_SIZE must be a power of 2 (e.g. 8, 16, 32)
 #if BOTH(SDSUPPORT, DIRECT_STEPPING)
   #define BLOCK_BUFFER_SIZE  8

config/examples/Kingroon/KP3/Configuration_adv.h

@@ -1831,7 +1831,7 @@
 
 // @section motion
 
-// The number of lineear moves that can be in the planner at once.
+// The number of linear moves that can be in the planner at once.
 // The value of BLOCK_BUFFER_SIZE must be a power of 2 (e.g. 8, 16, 32)
 #if BOTH(SDSUPPORT, DIRECT_STEPPING)
   #define BLOCK_BUFFER_SIZE  8

config/examples/MBot/Cube/Configuration_adv.h

@@ -1831,7 +1831,7 @@
 
 // @section motion
 
-// The number of lineear moves that can be in the planner at once.
+// The number of linear moves that can be in the planner at once.
 // The value of BLOCK_BUFFER_SIZE must be a power of 2 (e.g. 8, 16, 32)
 #if BOTH(SDSUPPORT, DIRECT_STEPPING)
   #define BLOCK_BUFFER_SIZE  8

config/examples/MakerParts/Configuration_adv.h

@@ -1831,7 +1831,7 @@
 
 // @section motion
 
-// The number of lineear moves that can be in the planner at once.
+// The number of linear moves that can be in the planner at once.
 // The value of BLOCK_BUFFER_SIZE must be a power of 2 (e.g. 8, 16, 32)
 #if BOTH(SDSUPPORT, DIRECT_STEPPING)
   #define BLOCK_BUFFER_SIZE  8

config/examples/Malyan/M150/Configuration_adv.h

@@ -1831,7 +1831,7 @@
 
 // @section motion
 
-// The number of lineear moves that can be in the planner at once.
+// The number of linear moves that can be in the planner at once.
 // The value of BLOCK_BUFFER_SIZE must be a power of 2 (e.g. 8, 16, 32)
 #if BOTH(SDSUPPORT, DIRECT_STEPPING)
   #define BLOCK_BUFFER_SIZE  8

config/examples/Malyan/M200/Configuration_adv.h

@@ -1833,7 +1833,7 @@
 
 // @section motion
 
-// The number of lineear moves that can be in the planner at once.
+// The number of linear moves that can be in the planner at once.
 // The value of BLOCK_BUFFER_SIZE must be a power of 2 (e.g. 8, 16, 32)
 #if BOTH(SDSUPPORT, DIRECT_STEPPING)
   #define BLOCK_BUFFER_SIZE  8

config/examples/Micromake/C1/enhanced/Configuration_adv.h

@@ -1831,7 +1831,7 @@
 
 // @section motion
 
-// The number of lineear moves that can be in the planner at once.
+// The number of linear moves that can be in the planner at once.
 // The value of BLOCK_BUFFER_SIZE must be a power of 2 (e.g. 8, 16, 32)
 #if BOTH(SDSUPPORT, DIRECT_STEPPING)
   #define BLOCK_BUFFER_SIZE  8