3D-printing/Configurations
1
0
Fork 0
mirror of https://github.com/MarlinFirmware/Configurations.git synced 2025-08-09 23:05:06 -06:00
Code Issues Projects Releases Packages Wiki Activity Actions

Chamber PID heating

Browse source 
MarlinFirmware/Marlin#21156
This commit is contained in:
Scott Lahteine 2021-02-25 02:38:46 -06:00
parent f6eb5a3c9e
commit 3fc51d8e48
465 changed files with 14988 additions and 1349 deletions
Download patch file Download diff file Expand all files Collapse all files

6
config/examples/BIBO/TouchX/default/Configuration.h
View file

@ -447,6 +447,10 @@
#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer
#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
#define TEMP_CHAMBER_RESIDENCY_TIME 10 // (seconds) Time to wait for chamber to "settle" in M191
#define TEMP_CHAMBER_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer
#define TEMP_CHAMBER_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
// Below this temperature the heater will be switched off
// because it probably indicates a broken thermistor wire.
#define HEATER_0_MINTEMP 5
@ -458,6 +462,7 @@
#define HEATER_6_MINTEMP 5
#define HEATER_7_MINTEMP 5
#define BED_MINTEMP 5
#define CHAMBER_MINTEMP 5
// Above this temperature the heater will be switched off.
// This can protect components from overheating, but NOT from shorts and failures.
@ -471,6 +476,7 @@
#define HEATER_6_MAXTEMP 275
#define HEATER_7_MAXTEMP 275
#define BED_MAXTEMP 115
#define CHAMBER_MAXTEMP 60
//===========================================================================
//============================= PID Settings ================================

7
config/examples/BIBO/TouchX/default/Configuration_adv.h
View file

@ -144,12 +144,9 @@
// Heated Chamber options
//
#if TEMP_SENSOR_CHAMBER
// Make sure you define where your heater is connected, the following works on a BTT SKR 1.4 Turbo
// using the secondary tool heater output. (FAN1 by default).
//#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (SKR 1.4 Turbo specific)
//#define HEATER_CHAMBER_PIN P2_04 // Chamber heater on/off pin (HE1 connector on SKR 1.4 Turbo)
//#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug)
//#define HEATER_CHAMBER_INVERTING false
//#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug)
//#define CHAMBER_FAN // Enable a fan on the chamber
#if ENABLED(CHAMBER_FAN)