diff --git a/config/default/Configuration_adv.h b/config/default/Configuration_adv.h index 37c9979771..1610422f66 100644 --- a/config/default/Configuration_adv.h +++ b/config/default/Configuration_adv.h @@ -818,11 +818,14 @@ #define DISABLE_INACTIVE_Z true // Set to false if the nozzle will fall down on your printed part when print has finished. #define DISABLE_INACTIVE_E true -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 +// If the Nozzle or Bed falls when the Z stepper is disabled, set its resting position here. +//#define Z_AFTER_DEACTIVATE Z_HOME_POS //#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated +#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate +#define DEFAULT_MINTRAVELFEEDRATE 0.0 + // Minimum time that a segment needs to take if the buffer is emptied #define DEFAULT_MINSEGMENTTIME 20000 // (µs) diff --git a/config/examples/3DFabXYZ/Migbot/Configuration_adv.h b/config/examples/3DFabXYZ/Migbot/Configuration_adv.h index cc782d121f..68ac98ee85 100644 --- a/config/examples/3DFabXYZ/Migbot/Configuration_adv.h +++ b/config/examples/3DFabXYZ/Migbot/Configuration_adv.h @@ -820,11 +820,14 @@ #define DISABLE_INACTIVE_Z true // Set to false if the nozzle will fall down on your printed part when print has finished. #define DISABLE_INACTIVE_E true -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 +// If the Nozzle or Bed falls when the Z stepper is disabled, set its resting position here. +//#define Z_AFTER_DEACTIVATE Z_HOME_POS //#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated +#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate +#define DEFAULT_MINTRAVELFEEDRATE 0.0 + // Minimum time that a segment needs to take if the buffer is emptied #define DEFAULT_MINSEGMENTTIME 20000 // (µs) diff --git a/config/examples/ADIMLab/Gantry v1/Configuration_adv.h b/config/examples/ADIMLab/Gantry v1/Configuration_adv.h index c6ca606558..b775abdee7 100644 --- a/config/examples/ADIMLab/Gantry v1/Configuration_adv.h +++ b/config/examples/ADIMLab/Gantry v1/Configuration_adv.h @@ -820,11 +820,14 @@ #define DISABLE_INACTIVE_Z true // Set to false if the nozzle will fall down on your printed part when print has finished. #define DISABLE_INACTIVE_E true -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 +// If the Nozzle or Bed falls when the Z stepper is disabled, set its resting position here. +//#define Z_AFTER_DEACTIVATE Z_HOME_POS //#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated +#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate +#define DEFAULT_MINTRAVELFEEDRATE 0.0 + // Minimum time that a segment needs to take if the buffer is emptied #define DEFAULT_MINSEGMENTTIME 20000 // (µs) diff --git a/config/examples/ADIMLab/Gantry v2/Configuration_adv.h b/config/examples/ADIMLab/Gantry v2/Configuration_adv.h index bb63846afe..049cbf48c4 100644 --- a/config/examples/ADIMLab/Gantry v2/Configuration_adv.h +++ b/config/examples/ADIMLab/Gantry v2/Configuration_adv.h @@ -820,11 +820,14 @@ #define DISABLE_INACTIVE_Z true // Set to false if the nozzle will fall down on your printed part when print has finished. #define DISABLE_INACTIVE_E true -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 +// If the Nozzle or Bed falls when the Z stepper is disabled, set its resting position here. +//#define Z_AFTER_DEACTIVATE Z_HOME_POS //#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated +#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate +#define DEFAULT_MINTRAVELFEEDRATE 0.0 + // Minimum time that a segment needs to take if the buffer is emptied #define DEFAULT_MINSEGMENTTIME 20000 // (µs) diff --git a/config/examples/AlephObjects/TAZ4/Configuration_adv.h b/config/examples/AlephObjects/TAZ4/Configuration_adv.h index 817388019c..bb809d8ddb 100644 --- a/config/examples/AlephObjects/TAZ4/Configuration_adv.h +++ b/config/examples/AlephObjects/TAZ4/Configuration_adv.h @@ -820,11 +820,14 @@ #define DISABLE_INACTIVE_Z true // Set to false if the nozzle will fall down on your printed part when print has finished. #define DISABLE_INACTIVE_E true -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 +// If the Nozzle or Bed falls when the Z stepper is disabled, set its resting position here. +//#define Z_AFTER_DEACTIVATE Z_HOME_POS //#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated +#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate +#define DEFAULT_MINTRAVELFEEDRATE 0.0 + // Minimum time that a segment needs to take if the buffer is emptied #define DEFAULT_MINSEGMENTTIME 20000 // (µs) diff --git a/config/examples/Alfawise/U20-bltouch/Configuration_adv.h b/config/examples/Alfawise/U20-bltouch/Configuration_adv.h index 540afbe313..9abf0cb7d8 100644 --- a/config/examples/Alfawise/U20-bltouch/Configuration_adv.h +++ b/config/examples/Alfawise/U20-bltouch/Configuration_adv.h @@ -821,11 +821,14 @@ #define DISABLE_INACTIVE_Z true // Set to false if the nozzle will fall down on your printed part when print has finished. #define DISABLE_INACTIVE_E true -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 +// If the Nozzle or Bed falls when the Z stepper is disabled, set its resting position here. +//#define Z_AFTER_DEACTIVATE Z_HOME_POS //#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated +#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate +#define DEFAULT_MINTRAVELFEEDRATE 0.0 + // Minimum time that a segment needs to take if the buffer is emptied #define DEFAULT_MINSEGMENTTIME 20000 // (µs) diff --git a/config/examples/Alfawise/U20/Configuration_adv.h b/config/examples/Alfawise/U20/Configuration_adv.h index 2bbdb162b8..021b674a8c 100644 --- a/config/examples/Alfawise/U20/Configuration_adv.h +++ b/config/examples/Alfawise/U20/Configuration_adv.h @@ -820,11 +820,14 @@ #define DISABLE_INACTIVE_Z true // Set to false if the nozzle will fall down on your printed part when print has finished. #define DISABLE_INACTIVE_E true -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 +// If the Nozzle or Bed falls when the Z stepper is disabled, set its resting position here. +//#define Z_AFTER_DEACTIVATE Z_HOME_POS //#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated +#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate +#define DEFAULT_MINTRAVELFEEDRATE 0.0 + // Minimum time that a segment needs to take if the buffer is emptied #define DEFAULT_MINSEGMENTTIME 20000 // (µs) diff --git a/config/examples/AliExpress/UM2pExt/Configuration_adv.h b/config/examples/AliExpress/UM2pExt/Configuration_adv.h index 9bda6545ac..da251a91ee 100644 --- a/config/examples/AliExpress/UM2pExt/Configuration_adv.h +++ b/config/examples/AliExpress/UM2pExt/Configuration_adv.h @@ -820,11 +820,14 @@ #define DISABLE_INACTIVE_Z true // Set to false if the nozzle will fall down on your printed part when print has finished. #define DISABLE_INACTIVE_E true -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 +// If the Nozzle or Bed falls when the Z stepper is disabled, set its resting position here. +//#define Z_AFTER_DEACTIVATE Z_HOME_POS //#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated +#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate +#define DEFAULT_MINTRAVELFEEDRATE 0.0 + // Minimum time that a segment needs to take if the buffer is emptied #define DEFAULT_MINSEGMENTTIME 20000 // (µs) diff --git a/config/examples/Anet/A2/Configuration_adv.h b/config/examples/Anet/A2/Configuration_adv.h index 7eba7c345b..b42c4606de 100644 --- a/config/examples/Anet/A2/Configuration_adv.h +++ b/config/examples/Anet/A2/Configuration_adv.h @@ -820,11 +820,14 @@ #define DISABLE_INACTIVE_Z true // Set to false if the nozzle will fall down on your printed part when print has finished. #define DISABLE_INACTIVE_E true -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 +// If the Nozzle or Bed falls when the Z stepper is disabled, set its resting position here. +//#define Z_AFTER_DEACTIVATE Z_HOME_POS //#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated +#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate +#define DEFAULT_MINTRAVELFEEDRATE 0.0 + // Minimum time that a segment needs to take if the buffer is emptied #define DEFAULT_MINSEGMENTTIME 20000 // (µs) diff --git a/config/examples/Anet/A2plus/Configuration_adv.h b/config/examples/Anet/A2plus/Configuration_adv.h index f9cb98393c..39c11154fb 100644 --- a/config/examples/Anet/A2plus/Configuration_adv.h +++ b/config/examples/Anet/A2plus/Configuration_adv.h @@ -820,11 +820,14 @@ #define DISABLE_INACTIVE_Z true // Set to false if the nozzle will fall down on your printed part when print has finished. #define DISABLE_INACTIVE_E true -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 +// If the Nozzle or Bed falls when the Z stepper is disabled, set its resting position here. +//#define Z_AFTER_DEACTIVATE Z_HOME_POS //#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated +#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate +#define DEFAULT_MINTRAVELFEEDRATE 0.0 + // Minimum time that a segment needs to take if the buffer is emptied #define DEFAULT_MINSEGMENTTIME 20000 // (µs) diff --git a/config/examples/Anet/A6/Configuration_adv.h b/config/examples/Anet/A6/Configuration_adv.h index 7a81536dbe..a0aaeaae49 100644 --- a/config/examples/Anet/A6/Configuration_adv.h +++ b/config/examples/Anet/A6/Configuration_adv.h @@ -820,11 +820,14 @@ #define DISABLE_INACTIVE_Z true // Set to false if the nozzle will fall down on your printed part when print has finished. #define DISABLE_INACTIVE_E true -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 +// If the Nozzle or Bed falls when the Z stepper is disabled, set its resting position here. +//#define Z_AFTER_DEACTIVATE Z_HOME_POS //#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated +#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate +#define DEFAULT_MINTRAVELFEEDRATE 0.0 + // Minimum time that a segment needs to take if the buffer is emptied #define DEFAULT_MINSEGMENTTIME 20000 // (µs) diff --git a/config/examples/Anet/A8/Configuration_adv.h b/config/examples/Anet/A8/Configuration_adv.h index feca405b56..c93923f86a 100644 --- a/config/examples/Anet/A8/Configuration_adv.h +++ b/config/examples/Anet/A8/Configuration_adv.h @@ -820,11 +820,14 @@ #define DISABLE_INACTIVE_Z true // Set to false if the nozzle will fall down on your printed part when print has finished. #define DISABLE_INACTIVE_E true -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 +// If the Nozzle or Bed falls when the Z stepper is disabled, set its resting position here. +//#define Z_AFTER_DEACTIVATE Z_HOME_POS //#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated +#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate +#define DEFAULT_MINTRAVELFEEDRATE 0.0 + // Minimum time that a segment needs to take if the buffer is emptied #define DEFAULT_MINSEGMENTTIME 20000 // (µs) diff --git a/config/examples/Anet/A8plus/Configuration_adv.h b/config/examples/Anet/A8plus/Configuration_adv.h index 2523d661cd..42e15c989f 100644 --- a/config/examples/Anet/A8plus/Configuration_adv.h +++ b/config/examples/Anet/A8plus/Configuration_adv.h @@ -820,11 +820,14 @@ #define DISABLE_INACTIVE_Z true // Set to false if the nozzle will fall down on your printed part when print has finished. #define DISABLE_INACTIVE_E true -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 +// If the Nozzle or Bed falls when the Z stepper is disabled, set its resting position here. +//#define Z_AFTER_DEACTIVATE Z_HOME_POS //#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated +#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate +#define DEFAULT_MINTRAVELFEEDRATE 0.0 + // Minimum time that a segment needs to take if the buffer is emptied #define DEFAULT_MINSEGMENTTIME 20000 // (µs) diff --git a/config/examples/Anet/E10/Configuration_adv.h b/config/examples/Anet/E10/Configuration_adv.h index dd71c31daa..ad093921f4 100644 --- a/config/examples/Anet/E10/Configuration_adv.h +++ b/config/examples/Anet/E10/Configuration_adv.h @@ -820,11 +820,14 @@ #define DISABLE_INACTIVE_Z true // Set to false if the nozzle will fall down on your printed part when print has finished. #define DISABLE_INACTIVE_E true -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 +// If the Nozzle or Bed falls when the Z stepper is disabled, set its resting position here. +//#define Z_AFTER_DEACTIVATE Z_HOME_POS //#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated +#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate +#define DEFAULT_MINTRAVELFEEDRATE 0.0 + // Minimum time that a segment needs to take if the buffer is emptied #define DEFAULT_MINSEGMENTTIME 20000 // (µs) diff --git a/config/examples/Anet/E16/Configuration_adv.h b/config/examples/Anet/E16/Configuration_adv.h index 075bbcac22..ec4ca27ec9 100644 --- a/config/examples/Anet/E16/Configuration_adv.h +++ b/config/examples/Anet/E16/Configuration_adv.h @@ -820,11 +820,14 @@ #define DISABLE_INACTIVE_Z true // Set to false if the nozzle will fall down on your printed part when print has finished. #define DISABLE_INACTIVE_E true -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 +// If the Nozzle or Bed falls when the Z stepper is disabled, set its resting position here. +//#define Z_AFTER_DEACTIVATE Z_HOME_POS //#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated +#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate +#define DEFAULT_MINTRAVELFEEDRATE 0.0 + // Minimum time that a segment needs to take if the buffer is emptied #define DEFAULT_MINSEGMENTTIME 20000 // (µs) diff --git a/config/examples/AnyCubic/Mega Zero/Configuration_adv.h b/config/examples/AnyCubic/Mega Zero/Configuration_adv.h index d86c5a52fe..d282ff3f92 100644 --- a/config/examples/AnyCubic/Mega Zero/Configuration_adv.h +++ b/config/examples/AnyCubic/Mega Zero/Configuration_adv.h @@ -820,11 +820,14 @@ #define DISABLE_INACTIVE_Z true // Set to false if the nozzle will fall down on your printed part when print has finished. #define DISABLE_INACTIVE_E true -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 +// If the Nozzle or Bed falls when the Z stepper is disabled, set its resting position here. +//#define Z_AFTER_DEACTIVATE Z_HOME_POS //#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated +#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate +#define DEFAULT_MINTRAVELFEEDRATE 0.0 + // Minimum time that a segment needs to take if the buffer is emptied #define DEFAULT_MINSEGMENTTIME 20000 // (µs) diff --git a/config/examples/AnyCubic/i3 Mega/Configuration_adv.h b/config/examples/AnyCubic/i3 Mega/Configuration_adv.h index e7547dffc8..affef00133 100644 --- a/config/examples/AnyCubic/i3 Mega/Configuration_adv.h +++ b/config/examples/AnyCubic/i3 Mega/Configuration_adv.h @@ -820,11 +820,14 @@ #define DISABLE_INACTIVE_Z true // Set to false if the nozzle will fall down on your printed part when print has finished. #define DISABLE_INACTIVE_E true -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 +// If the Nozzle or Bed falls when the Z stepper is disabled, set its resting position here. +//#define Z_AFTER_DEACTIVATE Z_HOME_POS //#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated +#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate +#define DEFAULT_MINTRAVELFEEDRATE 0.0 + // Minimum time that a segment needs to take if the buffer is emptied #define DEFAULT_MINSEGMENTTIME 20000 // (µs) diff --git a/config/examples/AnyCubic/i3/Configuration_adv.h b/config/examples/AnyCubic/i3/Configuration_adv.h index aa93e23c6c..1640e4a4f2 100644 --- a/config/examples/AnyCubic/i3/Configuration_adv.h +++ b/config/examples/AnyCubic/i3/Configuration_adv.h @@ -820,11 +820,14 @@ #define DISABLE_INACTIVE_Z true // Set to false if the nozzle will fall down on your printed part when print has finished. #define DISABLE_INACTIVE_E true -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 +// If the Nozzle or Bed falls when the Z stepper is disabled, set its resting position here. +//#define Z_AFTER_DEACTIVATE Z_HOME_POS //#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated +#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate +#define DEFAULT_MINTRAVELFEEDRATE 0.0 + // Minimum time that a segment needs to take if the buffer is emptied #define DEFAULT_MINSEGMENTTIME 20000 // (µs) diff --git a/config/examples/ArmEd/Configuration_adv.h b/config/examples/ArmEd/Configuration_adv.h index 627017bd52..24b634ce78 100644 --- a/config/examples/ArmEd/Configuration_adv.h +++ b/config/examples/ArmEd/Configuration_adv.h @@ -824,11 +824,14 @@ #define DISABLE_INACTIVE_Z true // Set to false if the nozzle will fall down on your printed part when print has finished. #define DISABLE_INACTIVE_E true -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 +// If the Nozzle or Bed falls when the Z stepper is disabled, set its resting position here. +//#define Z_AFTER_DEACTIVATE Z_HOME_POS //#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated +#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate +#define DEFAULT_MINTRAVELFEEDRATE 0.0 + // Minimum time that a segment needs to take if the buffer is emptied #define DEFAULT_MINSEGMENTTIME 20000 // (µs) diff --git a/config/examples/Artillery/Genius/Configuration_adv.h b/config/examples/Artillery/Genius/Configuration_adv.h index 3dafc087c7..bb7ee70c62 100644 --- a/config/examples/Artillery/Genius/Configuration_adv.h +++ b/config/examples/Artillery/Genius/Configuration_adv.h @@ -820,11 +820,14 @@ #define DISABLE_INACTIVE_Z true // Set to false if the nozzle will fall down on your printed part when print has finished. #define DISABLE_INACTIVE_E true -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 +// If the Nozzle or Bed falls when the Z stepper is disabled, set its resting position here. +//#define Z_AFTER_DEACTIVATE Z_HOME_POS //#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated +#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate +#define DEFAULT_MINTRAVELFEEDRATE 0.0 + // Minimum time that a segment needs to take if the buffer is emptied #define DEFAULT_MINSEGMENTTIME 20000 // (µs) diff --git a/config/examples/Artillery/Sidewinder X1/Configuration_adv.h b/config/examples/Artillery/Sidewinder X1/Configuration_adv.h index e2cde6bae8..114ced5191 100644 --- a/config/examples/Artillery/Sidewinder X1/Configuration_adv.h +++ b/config/examples/Artillery/Sidewinder X1/Configuration_adv.h @@ -820,11 +820,14 @@ #define DISABLE_INACTIVE_Z true // Set to false if the nozzle will fall down on your printed part when print has finished. #define DISABLE_INACTIVE_E true -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 +// If the Nozzle or Bed falls when the Z stepper is disabled, set its resting position here. +//#define Z_AFTER_DEACTIVATE Z_HOME_POS //#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated +#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate +#define DEFAULT_MINTRAVELFEEDRATE 0.0 + // Minimum time that a segment needs to take if the buffer is emptied #define DEFAULT_MINSEGMENTTIME 20000 // (µs) diff --git a/config/examples/Artillery/Sidewinder X1_0.9_degree_BMG_E3D_V6/Configuration_adv.h b/config/examples/Artillery/Sidewinder X1_0.9_degree_BMG_E3D_V6/Configuration_adv.h index 3b77a04b23..a5872dff93 100644 --- a/config/examples/Artillery/Sidewinder X1_0.9_degree_BMG_E3D_V6/Configuration_adv.h +++ b/config/examples/Artillery/Sidewinder X1_0.9_degree_BMG_E3D_V6/Configuration_adv.h @@ -820,11 +820,14 @@ #define DISABLE_INACTIVE_Z true // Set to false if the nozzle will fall down on your printed part when print has finished. #define DISABLE_INACTIVE_E true -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 +// If the Nozzle or Bed falls when the Z stepper is disabled, set its resting position here. +//#define Z_AFTER_DEACTIVATE Z_HOME_POS //#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated +#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate +#define DEFAULT_MINTRAVELFEEDRATE 0.0 + // Minimum time that a segment needs to take if the buffer is emptied #define DEFAULT_MINSEGMENTTIME 20000 // (µs) diff --git a/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h b/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h index 755d335f4b..571c4f9934 100644 --- a/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h +++ b/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h @@ -820,11 +820,14 @@ #define DISABLE_INACTIVE_Z true // Set to false if the nozzle will fall down on your printed part when print has finished. #define DISABLE_INACTIVE_E true -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 +// If the Nozzle or Bed falls when the Z stepper is disabled, set its resting position here. +//#define Z_AFTER_DEACTIVATE Z_HOME_POS //#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated +#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate +#define DEFAULT_MINTRAVELFEEDRATE 0.0 + // Minimum time that a segment needs to take if the buffer is emptied #define DEFAULT_MINSEGMENTTIME 20000 // (µs) diff --git a/config/examples/BIBO/TouchX/default/Configuration_adv.h b/config/examples/BIBO/TouchX/default/Configuration_adv.h index 6e7dba6621..cd761c7ade 100644 --- a/config/examples/BIBO/TouchX/default/Configuration_adv.h +++ b/config/examples/BIBO/TouchX/default/Configuration_adv.h @@ -820,11 +820,14 @@ #define DISABLE_INACTIVE_Z true // Set to false if the nozzle will fall down on your printed part when print has finished. #define DISABLE_INACTIVE_E true -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 +// If the Nozzle or Bed falls when the Z stepper is disabled, set its resting position here. +//#define Z_AFTER_DEACTIVATE Z_HOME_POS //#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated +#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate +#define DEFAULT_MINTRAVELFEEDRATE 0.0 + // Minimum time that a segment needs to take if the buffer is emptied #define DEFAULT_MINSEGMENTTIME 20000 // (µs) diff --git a/config/examples/BQ/Hephestos/Configuration_adv.h b/config/examples/BQ/Hephestos/Configuration_adv.h index 7a50ffd319..f9046296e0 100644 --- a/config/examples/BQ/Hephestos/Configuration_adv.h +++ b/config/examples/BQ/Hephestos/Configuration_adv.h @@ -820,11 +820,14 @@ #define DISABLE_INACTIVE_Z true // Set to false if the nozzle will fall down on your printed part when print has finished. #define DISABLE_INACTIVE_E true -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 +// If the Nozzle or Bed falls when the Z stepper is disabled, set its resting position here. +//#define Z_AFTER_DEACTIVATE Z_HOME_POS //#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated +#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate +#define DEFAULT_MINTRAVELFEEDRATE 0.0 + // Minimum time that a segment needs to take if the buffer is emptied #define DEFAULT_MINSEGMENTTIME 20000 // (µs) diff --git a/config/examples/BQ/Hephestos_2/Configuration_adv.h b/config/examples/BQ/Hephestos_2/Configuration_adv.h index 088f6ab2c8..d0e9bcfb98 100644 --- a/config/examples/BQ/Hephestos_2/Configuration_adv.h +++ b/config/examples/BQ/Hephestos_2/Configuration_adv.h @@ -820,11 +820,14 @@ #define DISABLE_INACTIVE_Z false // Set to false if the nozzle will fall down on your printed part when print has finished. #define DISABLE_INACTIVE_E true +// If the Nozzle or Bed falls when the Z stepper is disabled, set its resting position here. +//#define Z_AFTER_DEACTIVATE Z_HOME_POS + +#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated + #define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate #define DEFAULT_MINTRAVELFEEDRATE 0.0 -#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated - // Minimum time that a segment needs to take if the buffer is emptied #define DEFAULT_MINSEGMENTTIME 20000 // (µs) diff --git a/config/examples/BQ/WITBOX/Configuration_adv.h b/config/examples/BQ/WITBOX/Configuration_adv.h index 048ca8a079..8a76119e9c 100644 --- a/config/examples/BQ/WITBOX/Configuration_adv.h +++ b/config/examples/BQ/WITBOX/Configuration_adv.h @@ -820,11 +820,14 @@ #define DISABLE_INACTIVE_Z true // Set to false if the nozzle will fall down on your printed part when print has finished. #define DISABLE_INACTIVE_E true -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 +// If the Nozzle or Bed falls when the Z stepper is disabled, set its resting position here. +//#define Z_AFTER_DEACTIVATE Z_HOME_POS //#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated +#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate +#define DEFAULT_MINTRAVELFEEDRATE 0.0 + // Minimum time that a segment needs to take if the buffer is emptied #define DEFAULT_MINSEGMENTTIME 20000 // (µs) diff --git a/config/examples/Cartesio/Configuration_adv.h b/config/examples/Cartesio/Configuration_adv.h index 0d6b160f48..103ad5a0c9 100644 --- a/config/examples/Cartesio/Configuration_adv.h +++ b/config/examples/Cartesio/Configuration_adv.h @@ -820,11 +820,14 @@ #define DISABLE_INACTIVE_Z true // Set to false if the nozzle will fall down on your printed part when print has finished. #define DISABLE_INACTIVE_E true -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 +// If the Nozzle or Bed falls when the Z stepper is disabled, set its resting position here. +//#define Z_AFTER_DEACTIVATE Z_HOME_POS //#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated +#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate +#define DEFAULT_MINTRAVELFEEDRATE 0.0 + // Minimum time that a segment needs to take if the buffer is emptied #define DEFAULT_MINSEGMENTTIME 20000 // (µs) diff --git a/config/examples/Creality/CR-10 V2/Configuration_adv.h b/config/examples/Creality/CR-10 V2/Configuration_adv.h index dccb290539..65482a11d5 100644 --- a/config/examples/Creality/CR-10 V2/Configuration_adv.h +++ b/config/examples/Creality/CR-10 V2/Configuration_adv.h @@ -820,11 +820,14 @@ #define DISABLE_INACTIVE_Z true // Set to false if the nozzle will fall down on your printed part when print has finished. #define DISABLE_INACTIVE_E true -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 +// If the Nozzle or Bed falls when the Z stepper is disabled, set its resting position here. +//#define Z_AFTER_DEACTIVATE Z_HOME_POS //#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated +#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate +#define DEFAULT_MINTRAVELFEEDRATE 0.0 + // Minimum time that a segment needs to take if the buffer is emptied #define DEFAULT_MINSEGMENTTIME 20000 // (µs) diff --git a/config/examples/Creality/CR-10/Configuration_adv.h b/config/examples/Creality/CR-10/Configuration_adv.h index 2509198842..62c11d93f1 100644 --- a/config/examples/Creality/CR-10/Configuration_adv.h +++ b/config/examples/Creality/CR-10/Configuration_adv.h @@ -820,11 +820,14 @@ #define DISABLE_INACTIVE_Z true // Set to false if the nozzle will fall down on your printed part when print has finished. #define DISABLE_INACTIVE_E true -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 +// If the Nozzle or Bed falls when the Z stepper is disabled, set its resting position here. +//#define Z_AFTER_DEACTIVATE Z_HOME_POS //#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated +#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate +#define DEFAULT_MINTRAVELFEEDRATE 0.0 + // Minimum time that a segment needs to take if the buffer is emptied #define DEFAULT_MINSEGMENTTIME 20000 // (µs) diff --git a/config/examples/Creality/CR-10S/Configuration_adv.h b/config/examples/Creality/CR-10S/Configuration_adv.h index 6c10529072..007c277933 100644 --- a/config/examples/Creality/CR-10S/Configuration_adv.h +++ b/config/examples/Creality/CR-10S/Configuration_adv.h @@ -820,11 +820,14 @@ #define DISABLE_INACTIVE_Z true // Set to false if the nozzle will fall down on your printed part when print has finished. #define DISABLE_INACTIVE_E true -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 +// If the Nozzle or Bed falls when the Z stepper is disabled, set its resting position here. +//#define Z_AFTER_DEACTIVATE Z_HOME_POS //#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated +#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate +#define DEFAULT_MINTRAVELFEEDRATE 0.0 + // Minimum time that a segment needs to take if the buffer is emptied #define DEFAULT_MINSEGMENTTIME 20000 // (µs) diff --git a/config/examples/Creality/CR-10_5S/Configuration_adv.h b/config/examples/Creality/CR-10_5S/Configuration_adv.h index dd55c5357e..9004a08a08 100644 --- a/config/examples/Creality/CR-10_5S/Configuration_adv.h +++ b/config/examples/Creality/CR-10_5S/Configuration_adv.h @@ -820,11 +820,14 @@ #define DISABLE_INACTIVE_Z true // Set to false if the nozzle will fall down on your printed part when print has finished. #define DISABLE_INACTIVE_E true -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 +// If the Nozzle or Bed falls when the Z stepper is disabled, set its resting position here. +//#define Z_AFTER_DEACTIVATE Z_HOME_POS //#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated +#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate +#define DEFAULT_MINTRAVELFEEDRATE 0.0 + // Minimum time that a segment needs to take if the buffer is emptied #define DEFAULT_MINSEGMENTTIME 20000 // (µs) diff --git a/config/examples/Creality/CR-10mini/CrealityV1/Configuration_adv.h b/config/examples/Creality/CR-10mini/CrealityV1/Configuration_adv.h index e1dc9e01a3..ca95bf2b27 100644 --- a/config/examples/Creality/CR-10mini/CrealityV1/Configuration_adv.h +++ b/config/examples/Creality/CR-10mini/CrealityV1/Configuration_adv.h @@ -820,11 +820,14 @@ #define DISABLE_INACTIVE_Z true // Set to false if the nozzle will fall down on your printed part when print has finished. #define DISABLE_INACTIVE_E true -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 +// If the Nozzle or Bed falls when the Z stepper is disabled, set its resting position here. +//#define Z_AFTER_DEACTIVATE Z_HOME_POS //#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated +#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate +#define DEFAULT_MINTRAVELFEEDRATE 0.0 + // Minimum time that a segment needs to take if the buffer is emptied #define DEFAULT_MINSEGMENTTIME 20000 // (µs) diff --git a/config/examples/Creality/CR-10mini/MEEB-3DP/Configuration_adv.h b/config/examples/Creality/CR-10mini/MEEB-3DP/Configuration_adv.h index bb17a160fa..57ba2fd014 100644 --- a/config/examples/Creality/CR-10mini/MEEB-3DP/Configuration_adv.h +++ b/config/examples/Creality/CR-10mini/MEEB-3DP/Configuration_adv.h @@ -820,11 +820,14 @@ #define DISABLE_INACTIVE_Z true // Set to false if the nozzle will fall down on your printed part when print has finished. #define DISABLE_INACTIVE_E true -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 +// If the Nozzle or Bed falls when the Z stepper is disabled, set its resting position here. +//#define Z_AFTER_DEACTIVATE Z_HOME_POS //#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated +#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate +#define DEFAULT_MINTRAVELFEEDRATE 0.0 + // Minimum time that a segment needs to take if the buffer is emptied #define DEFAULT_MINSEGMENTTIME 20000 // (µs) diff --git a/config/examples/Creality/CR-20 Pro/Configuration_adv.h b/config/examples/Creality/CR-20 Pro/Configuration_adv.h index 3e0122f3e8..b785ed6670 100644 --- a/config/examples/Creality/CR-20 Pro/Configuration_adv.h +++ b/config/examples/Creality/CR-20 Pro/Configuration_adv.h @@ -820,11 +820,14 @@ #define DISABLE_INACTIVE_Z true // Set to false if the nozzle will fall down on your printed part when print has finished. #define DISABLE_INACTIVE_E true -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 +// If the Nozzle or Bed falls when the Z stepper is disabled, set its resting position here. +//#define Z_AFTER_DEACTIVATE Z_HOME_POS //#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated +#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate +#define DEFAULT_MINTRAVELFEEDRATE 0.0 + // Minimum time that a segment needs to take if the buffer is emptied #define DEFAULT_MINSEGMENTTIME 20000 // (µs) diff --git a/config/examples/Creality/CR-20/Configuration_adv.h b/config/examples/Creality/CR-20/Configuration_adv.h index db8ab73e55..0ec3b67ced 100644 --- a/config/examples/Creality/CR-20/Configuration_adv.h +++ b/config/examples/Creality/CR-20/Configuration_adv.h @@ -820,11 +820,14 @@ #define DISABLE_INACTIVE_Z true // Set to false if the nozzle will fall down on your printed part when print has finished. #define DISABLE_INACTIVE_E true -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 +// If the Nozzle or Bed falls when the Z stepper is disabled, set its resting position here. +//#define Z_AFTER_DEACTIVATE Z_HOME_POS //#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated +#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate +#define DEFAULT_MINTRAVELFEEDRATE 0.0 + // Minimum time that a segment needs to take if the buffer is emptied #define DEFAULT_MINSEGMENTTIME 20000 // (µs) diff --git a/config/examples/Creality/CR-8/Configuration_adv.h b/config/examples/Creality/CR-8/Configuration_adv.h index 0dee4c9656..d6fcb79e72 100644 --- a/config/examples/Creality/CR-8/Configuration_adv.h +++ b/config/examples/Creality/CR-8/Configuration_adv.h @@ -820,11 +820,14 @@ #define DISABLE_INACTIVE_Z false // Set to false if the nozzle will fall down on your printed part when print has finished. #define DISABLE_INACTIVE_E true -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 +// If the Nozzle or Bed falls when the Z stepper is disabled, set its resting position here. +//#define Z_AFTER_DEACTIVATE Z_HOME_POS //#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated +#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate +#define DEFAULT_MINTRAVELFEEDRATE 0.0 + // Minimum time that a segment needs to take if the buffer is emptied #define DEFAULT_MINSEGMENTTIME 20000 // (µs) diff --git a/config/examples/Creality/Ender-2/Configuration_adv.h b/config/examples/Creality/Ender-2/Configuration_adv.h index 75a9b3fbbb..6b2ebb2599 100644 --- a/config/examples/Creality/Ender-2/Configuration_adv.h +++ b/config/examples/Creality/Ender-2/Configuration_adv.h @@ -820,11 +820,14 @@ #define DISABLE_INACTIVE_Z true // Set to false if the nozzle will fall down on your printed part when print has finished. #define DISABLE_INACTIVE_E true -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 +// If the Nozzle or Bed falls when the Z stepper is disabled, set its resting position here. +//#define Z_AFTER_DEACTIVATE Z_HOME_POS //#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated +#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate +#define DEFAULT_MINTRAVELFEEDRATE 0.0 + // Minimum time that a segment needs to take if the buffer is emptied #define DEFAULT_MINSEGMENTTIME 20000 // (µs) diff --git a/config/examples/Creality/Ender-3 Pro V1.5/Configuration_adv.h b/config/examples/Creality/Ender-3 Pro V1.5/Configuration_adv.h index be246edb35..316561ad7b 100644 --- a/config/examples/Creality/Ender-3 Pro V1.5/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 Pro V1.5/Configuration_adv.h @@ -820,11 +820,14 @@ #define DISABLE_INACTIVE_Z true // Set to false if the nozzle will fall down on your printed part when print has finished. #define DISABLE_INACTIVE_E true -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 +// If the Nozzle or Bed falls when the Z stepper is disabled, set its resting position here. +//#define Z_AFTER_DEACTIVATE Z_HOME_POS //#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated +#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate +#define DEFAULT_MINTRAVELFEEDRATE 0.0 + // Minimum time that a segment needs to take if the buffer is emptied #define DEFAULT_MINSEGMENTTIME 20000 // (µs) diff --git a/config/examples/Creality/Ender-3 Pro/Configuration_adv.h b/config/examples/Creality/Ender-3 Pro/Configuration_adv.h index 00ae099600..7003b000d2 100644 --- a/config/examples/Creality/Ender-3 Pro/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 Pro/Configuration_adv.h @@ -820,11 +820,14 @@ #define DISABLE_INACTIVE_Z true // Set to false if the nozzle will fall down on your printed part when print has finished. #define DISABLE_INACTIVE_E true -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 +// If the Nozzle or Bed falls when the Z stepper is disabled, set its resting position here. +//#define Z_AFTER_DEACTIVATE Z_HOME_POS //#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated +#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate +#define DEFAULT_MINTRAVELFEEDRATE 0.0 + // Minimum time that a segment needs to take if the buffer is emptied #define DEFAULT_MINSEGMENTTIME 20000 // (µs) diff --git a/config/examples/Creality/Ender-3 V2/Configuration_adv.h b/config/examples/Creality/Ender-3 V2/Configuration_adv.h index bae5855f04..eb3171b61b 100644 --- a/config/examples/Creality/Ender-3 V2/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 V2/Configuration_adv.h @@ -820,11 +820,14 @@ #define DISABLE_INACTIVE_Z true // Set to false if the nozzle will fall down on your printed part when print has finished. #define DISABLE_INACTIVE_E true -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 +// If the Nozzle or Bed falls when the Z stepper is disabled, set its resting position here. +//#define Z_AFTER_DEACTIVATE Z_HOME_POS //#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated +#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate +#define DEFAULT_MINTRAVELFEEDRATE 0.0 + // Minimum time that a segment needs to take if the buffer is emptied #define DEFAULT_MINSEGMENTTIME 20000 // (µs) diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h index 78a61f3483..a95c45093c 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h @@ -820,11 +820,14 @@ #define DISABLE_INACTIVE_Z true // Set to false if the nozzle will fall down on your printed part when print has finished. #define DISABLE_INACTIVE_E true -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 +// If the Nozzle or Bed falls when the Z stepper is disabled, set its resting position here. +//#define Z_AFTER_DEACTIVATE Z_HOME_POS //#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated +#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate +#define DEFAULT_MINTRAVELFEEDRATE 0.0 + // Minimum time that a segment needs to take if the buffer is emptied #define DEFAULT_MINSEGMENTTIME 20000 // (µs) diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h index ed6cc751d5..591e17b03b 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h @@ -820,11 +820,14 @@ #define DISABLE_INACTIVE_Z true // Set to false if the nozzle will fall down on your printed part when print has finished. #define DISABLE_INACTIVE_E true -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 +// If the Nozzle or Bed falls when the Z stepper is disabled, set its resting position here. +//#define Z_AFTER_DEACTIVATE Z_HOME_POS //#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated +#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate +#define DEFAULT_MINTRAVELFEEDRATE 0.0 + // Minimum time that a segment needs to take if the buffer is emptied #define DEFAULT_MINSEGMENTTIME 20000 // (µs) diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h index 9d8fe3c53e..70871f4b17 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h @@ -820,11 +820,14 @@ #define DISABLE_INACTIVE_Z true // Set to false if the nozzle will fall down on your printed part when print has finished. #define DISABLE_INACTIVE_E true -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 +// If the Nozzle or Bed falls when the Z stepper is disabled, set its resting position here. +//#define Z_AFTER_DEACTIVATE Z_HOME_POS //#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated +#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate +#define DEFAULT_MINTRAVELFEEDRATE 0.0 + // Minimum time that a segment needs to take if the buffer is emptied #define DEFAULT_MINSEGMENTTIME 20000 // (µs) diff --git a/config/examples/Creality/Ender-3/CrealityV1/Configuration_adv.h b/config/examples/Creality/Ender-3/CrealityV1/Configuration_adv.h index 0c25c1fda7..6ff08d2d5e 100644 --- a/config/examples/Creality/Ender-3/CrealityV1/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/CrealityV1/Configuration_adv.h @@ -820,11 +820,14 @@ #define DISABLE_INACTIVE_Z true // Set to false if the nozzle will fall down on your printed part when print has finished. #define DISABLE_INACTIVE_E true -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 +// If the Nozzle or Bed falls when the Z stepper is disabled, set its resting position here. +//#define Z_AFTER_DEACTIVATE Z_HOME_POS //#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated +#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate +#define DEFAULT_MINTRAVELFEEDRATE 0.0 + // Minimum time that a segment needs to take if the buffer is emptied #define DEFAULT_MINSEGMENTTIME 20000 // (µs) diff --git a/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/BLTouch/Configuration_adv.h b/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/BLTouch/Configuration_adv.h index ec9ede4154..e15f0760b4 100644 --- a/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/BLTouch/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/BLTouch/Configuration_adv.h @@ -820,11 +820,14 @@ #define DISABLE_INACTIVE_Z true // Set to false if the nozzle will fall down on your printed part when print has finished. #define DISABLE_INACTIVE_E true -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 +// If the Nozzle or Bed falls when the Z stepper is disabled, set its resting position here. +//#define Z_AFTER_DEACTIVATE Z_HOME_POS //#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated +#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate +#define DEFAULT_MINTRAVELFEEDRATE 0.0 + // Minimum time that a segment needs to take if the buffer is emptied #define DEFAULT_MINSEGMENTTIME 20000 // (µs) diff --git a/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/base/Configuration_adv.h b/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/base/Configuration_adv.h index a0ef17ad47..e943550755 100644 --- a/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/base/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/base/Configuration_adv.h @@ -820,11 +820,14 @@ #define DISABLE_INACTIVE_Z true // Set to false if the nozzle will fall down on your printed part when print has finished. #define DISABLE_INACTIVE_E true -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 +// If the Nozzle or Bed falls when the Z stepper is disabled, set its resting position here. +//#define Z_AFTER_DEACTIVATE Z_HOME_POS //#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated +#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate +#define DEFAULT_MINTRAVELFEEDRATE 0.0 + // Minimum time that a segment needs to take if the buffer is emptied #define DEFAULT_MINSEGMENTTIME 20000 // (µs) diff --git a/config/examples/Creality/Ender-3/FYSETC Cheetah/BLTouch/Configuration_adv.h b/config/examples/Creality/Ender-3/FYSETC Cheetah/BLTouch/Configuration_adv.h index 1661468430..dd5a4225b3 100644 --- a/config/examples/Creality/Ender-3/FYSETC Cheetah/BLTouch/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/FYSETC Cheetah/BLTouch/Configuration_adv.h @@ -820,11 +820,14 @@ #define DISABLE_INACTIVE_Z true // Set to false if the nozzle will fall down on your printed part when print has finished. #define DISABLE_INACTIVE_E true -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 +// If the Nozzle or Bed falls when the Z stepper is disabled, set its resting position here. +//#define Z_AFTER_DEACTIVATE Z_HOME_POS //#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated +#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate +#define DEFAULT_MINTRAVELFEEDRATE 0.0 + // Minimum time that a segment needs to take if the buffer is emptied #define DEFAULT_MINSEGMENTTIME 20000 // (µs) diff --git a/config/examples/Creality/Ender-3/FYSETC Cheetah/base/Configuration_adv.h b/config/examples/Creality/Ender-3/FYSETC Cheetah/base/Configuration_adv.h index c354ba20e3..8199471e9a 100644 --- a/config/examples/Creality/Ender-3/FYSETC Cheetah/base/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/FYSETC Cheetah/base/Configuration_adv.h @@ -820,11 +820,14 @@ #define DISABLE_INACTIVE_Z true // Set to false if the nozzle will fall down on your printed part when print has finished. #define DISABLE_INACTIVE_E true -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 +// If the Nozzle or Bed falls when the Z stepper is disabled, set its resting position here. +//#define Z_AFTER_DEACTIVATE Z_HOME_POS //#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated +#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate +#define DEFAULT_MINTRAVELFEEDRATE 0.0 + // Minimum time that a segment needs to take if the buffer is emptied #define DEFAULT_MINSEGMENTTIME 20000 // (µs) diff --git a/config/examples/Creality/Ender-3/MEEB-3DP/Configuration_adv.h b/config/examples/Creality/Ender-3/MEEB-3DP/Configuration_adv.h index bfb99bc070..5ce00d2eab 100644 --- a/config/examples/Creality/Ender-3/MEEB-3DP/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/MEEB-3DP/Configuration_adv.h @@ -820,11 +820,14 @@ #define DISABLE_INACTIVE_Z true // Set to false if the nozzle will fall down on your printed part when print has finished. #define DISABLE_INACTIVE_E true -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 +// If the Nozzle or Bed falls when the Z stepper is disabled, set its resting position here. +//#define Z_AFTER_DEACTIVATE Z_HOME_POS //#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated +#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate +#define DEFAULT_MINTRAVELFEEDRATE 0.0 + // Minimum time that a segment needs to take if the buffer is emptied #define DEFAULT_MINSEGMENTTIME 20000 // (µs) diff --git a/config/examples/Creality/Ender-4/Configuration_adv.h b/config/examples/Creality/Ender-4/Configuration_adv.h index ae4bc74aaa..0e279f7675 100644 --- a/config/examples/Creality/Ender-4/Configuration_adv.h +++ b/config/examples/Creality/Ender-4/Configuration_adv.h @@ -820,11 +820,14 @@ #define DISABLE_INACTIVE_Z false // Set to false if the nozzle will fall down on your printed part when print has finished. #define DISABLE_INACTIVE_E true -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 +// If the Nozzle or Bed falls when the Z stepper is disabled, set its resting position here. +//#define Z_AFTER_DEACTIVATE Z_HOME_POS //#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated +#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate +#define DEFAULT_MINTRAVELFEEDRATE 0.0 + // Minimum time that a segment needs to take if the buffer is emptied #define DEFAULT_MINSEGMENTTIME 20000 // (µs) diff --git a/config/examples/Creality/Ender-5 Pro/Configuration_adv.h b/config/examples/Creality/Ender-5 Pro/Configuration_adv.h index 826260bd69..94578ff3dd 100644 --- a/config/examples/Creality/Ender-5 Pro/Configuration_adv.h +++ b/config/examples/Creality/Ender-5 Pro/Configuration_adv.h @@ -820,11 +820,14 @@ #define DISABLE_INACTIVE_Z false // Set to false if the nozzle will fall down on your printed part when print has finished. #define DISABLE_INACTIVE_E true -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 +// If the Nozzle or Bed falls when the Z stepper is disabled, set its resting position here. +//#define Z_AFTER_DEACTIVATE Z_HOME_POS //#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated +#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate +#define DEFAULT_MINTRAVELFEEDRATE 0.0 + // Minimum time that a segment needs to take if the buffer is emptied #define DEFAULT_MINSEGMENTTIME 20000 // (µs) diff --git a/config/examples/Creality/Ender-5/BigTreeTech SKR 1.4 Turbo/Configuration_adv.h b/config/examples/Creality/Ender-5/BigTreeTech SKR 1.4 Turbo/Configuration_adv.h index 9b4afde2a3..7211d55dfb 100644 --- a/config/examples/Creality/Ender-5/BigTreeTech SKR 1.4 Turbo/Configuration_adv.h +++ b/config/examples/Creality/Ender-5/BigTreeTech SKR 1.4 Turbo/Configuration_adv.h @@ -824,11 +824,14 @@ #define DISABLE_INACTIVE_Z false // Set to false if the nozzle will fall down on your printed part when print has finished. #define DISABLE_INACTIVE_E true -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 +// If the Nozzle or Bed falls when the Z stepper is disabled, set its resting position here. +//#define Z_AFTER_DEACTIVATE Z_HOME_POS //#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated +#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate +#define DEFAULT_MINTRAVELFEEDRATE 0.0 + // Minimum time that a segment needs to take if the buffer is emptied #define DEFAULT_MINSEGMENTTIME 20000 // (µs) diff --git a/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h b/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h index 06c6a380fb..fd3cb58fc5 100644 --- a/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h +++ b/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h @@ -820,11 +820,14 @@ #define DISABLE_INACTIVE_Z true // Set to false if the nozzle will fall down on your printed part when print has finished. #define DISABLE_INACTIVE_E true -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 +// If the Nozzle or Bed falls when the Z stepper is disabled, set its resting position here. +//#define Z_AFTER_DEACTIVATE Z_HOME_POS //#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated +#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate +#define DEFAULT_MINTRAVELFEEDRATE 0.0 + // Minimum time that a segment needs to take if the buffer is emptied #define DEFAULT_MINSEGMENTTIME 20000 // (µs) diff --git a/config/examples/Creality/Ender-5/Creality/Configuration_adv.h b/config/examples/Creality/Ender-5/Creality/Configuration_adv.h index 45a4eebffb..73004853fc 100644 --- a/config/examples/Creality/Ender-5/Creality/Configuration_adv.h +++ b/config/examples/Creality/Ender-5/Creality/Configuration_adv.h @@ -820,11 +820,14 @@ #define DISABLE_INACTIVE_Z false // Set to false if the nozzle will fall down on your printed part when print has finished. #define DISABLE_INACTIVE_E true -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 +// If the Nozzle or Bed falls when the Z stepper is disabled, set its resting position here. +//#define Z_AFTER_DEACTIVATE Z_HOME_POS //#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated +#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate +#define DEFAULT_MINTRAVELFEEDRATE 0.0 + // Minimum time that a segment needs to take if the buffer is emptied #define DEFAULT_MINSEGMENTTIME 20000 // (µs) diff --git a/config/examples/Creality/Ender-5_Plus/Configuration_adv.h b/config/examples/Creality/Ender-5_Plus/Configuration_adv.h index 8b3ee038dc..f10894033e 100644 --- a/config/examples/Creality/Ender-5_Plus/Configuration_adv.h +++ b/config/examples/Creality/Ender-5_Plus/Configuration_adv.h @@ -820,11 +820,14 @@ #define DISABLE_INACTIVE_Z false // Set to false if the nozzle will fall down on your printed part when print has finished. #define DISABLE_INACTIVE_E true -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 +// If the Nozzle or Bed falls when the Z stepper is disabled, set its resting position here. +//#define Z_AFTER_DEACTIVATE Z_HOME_POS //#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated +#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate +#define DEFAULT_MINTRAVELFEEDRATE 0.0 + // Minimum time that a segment needs to take if the buffer is emptied #define DEFAULT_MINSEGMENTTIME 20000 // (µs) diff --git a/config/examples/Dagoma/Disco Ultimate/Configuration_adv.h b/config/examples/Dagoma/Disco Ultimate/Configuration_adv.h index ea79ccf533..f18ae5b11e 100644 --- a/config/examples/Dagoma/Disco Ultimate/Configuration_adv.h +++ b/config/examples/Dagoma/Disco Ultimate/Configuration_adv.h @@ -820,11 +820,14 @@ #define DISABLE_INACTIVE_Z true // Set to false if the nozzle will fall down on your printed part when print has finished. #define DISABLE_INACTIVE_E true -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 +// If the Nozzle or Bed falls when the Z stepper is disabled, set its resting position here. +//#define Z_AFTER_DEACTIVATE Z_HOME_POS //#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated +#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate +#define DEFAULT_MINTRAVELFEEDRATE 0.0 + // Minimum time that a segment needs to take if the buffer is emptied #define DEFAULT_MINSEGMENTTIME 20000 // (µs) diff --git a/config/examples/Daycom/3DP-100/Configuration_adv.h b/config/examples/Daycom/3DP-100/Configuration_adv.h index 4758d5c5bc..cba10e66c9 100644 --- a/config/examples/Daycom/3DP-100/Configuration_adv.h +++ b/config/examples/Daycom/3DP-100/Configuration_adv.h @@ -820,11 +820,14 @@ #define DISABLE_INACTIVE_Z true // Set to false if the nozzle will fall down on your printed part when print has finished. #define DISABLE_INACTIVE_E true -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 +// If the Nozzle or Bed falls when the Z stepper is disabled, set its resting position here. +//#define Z_AFTER_DEACTIVATE Z_HOME_POS //#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated +#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate +#define DEFAULT_MINTRAVELFEEDRATE 0.0 + // Minimum time that a segment needs to take if the buffer is emptied #define DEFAULT_MINSEGMENTTIME 20000 // (µs) diff --git a/config/examples/EXP3D/Imprimante multifonction/Configuration_adv.h b/config/examples/EXP3D/Imprimante multifonction/Configuration_adv.h index 5bacd2febb..860f548332 100644 --- a/config/examples/EXP3D/Imprimante multifonction/Configuration_adv.h +++ b/config/examples/EXP3D/Imprimante multifonction/Configuration_adv.h @@ -820,11 +820,14 @@ #define DISABLE_INACTIVE_Z true // Set to false if the nozzle will fall down on your printed part when print has finished. #define DISABLE_INACTIVE_E true -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 +// If the Nozzle or Bed falls when the Z stepper is disabled, set its resting position here. +//#define Z_AFTER_DEACTIVATE Z_HOME_POS //#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated +#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate +#define DEFAULT_MINTRAVELFEEDRATE 0.0 + // Minimum time that a segment needs to take if the buffer is emptied #define DEFAULT_MINSEGMENTTIME 60000 // (µs) diff --git a/config/examples/Einstart-S/Configuration_adv.h b/config/examples/Einstart-S/Configuration_adv.h index 43a1c39806..af62dcba60 100644 --- a/config/examples/Einstart-S/Configuration_adv.h +++ b/config/examples/Einstart-S/Configuration_adv.h @@ -820,11 +820,14 @@ #define DISABLE_INACTIVE_Z true // Set to false if the nozzle will fall down on your printed part when print has finished. #define DISABLE_INACTIVE_E true -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 +// If the Nozzle or Bed falls when the Z stepper is disabled, set its resting position here. +//#define Z_AFTER_DEACTIVATE Z_HOME_POS //#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated +#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate +#define DEFAULT_MINTRAVELFEEDRATE 0.0 + // Minimum time that a segment needs to take if the buffer is emptied #define DEFAULT_MINSEGMENTTIME 20000 // (µs) diff --git a/config/examples/FYSETC/AIO_II/Configuration_adv.h b/config/examples/FYSETC/AIO_II/Configuration_adv.h index f23f1d6092..1c41e610ef 100644 --- a/config/examples/FYSETC/AIO_II/Configuration_adv.h +++ b/config/examples/FYSETC/AIO_II/Configuration_adv.h @@ -820,11 +820,14 @@ #define DISABLE_INACTIVE_Z true // Set to false if the nozzle will fall down on your printed part when print has finished. #define DISABLE_INACTIVE_E true -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 +// If the Nozzle or Bed falls when the Z stepper is disabled, set its resting position here. +//#define Z_AFTER_DEACTIVATE Z_HOME_POS //#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated +#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate +#define DEFAULT_MINTRAVELFEEDRATE 0.0 + // Minimum time that a segment needs to take if the buffer is emptied #define DEFAULT_MINSEGMENTTIME 20000 // (µs) diff --git a/config/examples/FYSETC/F6_13/Configuration_adv.h b/config/examples/FYSETC/F6_13/Configuration_adv.h index 66bbd43f1d..84ae9a2be5 100644 --- a/config/examples/FYSETC/F6_13/Configuration_adv.h +++ b/config/examples/FYSETC/F6_13/Configuration_adv.h @@ -820,11 +820,14 @@ #define DISABLE_INACTIVE_Z true // Set to false if the nozzle will fall down on your printed part when print has finished. #define DISABLE_INACTIVE_E true -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 +// If the Nozzle or Bed falls when the Z stepper is disabled, set its resting position here. +//#define Z_AFTER_DEACTIVATE Z_HOME_POS //#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated +#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate +#define DEFAULT_MINTRAVELFEEDRATE 0.0 + // Minimum time that a segment needs to take if the buffer is emptied #define DEFAULT_MINSEGMENTTIME 20000 // (µs) diff --git a/config/examples/FYSETC/S6/Configuration_adv.h b/config/examples/FYSETC/S6/Configuration_adv.h index 8d43090969..636b2b3895 100644 --- a/config/examples/FYSETC/S6/Configuration_adv.h +++ b/config/examples/FYSETC/S6/Configuration_adv.h @@ -820,11 +820,14 @@ #define DISABLE_INACTIVE_Z true // Set to false if the nozzle will fall down on your printed part when print has finished. #define DISABLE_INACTIVE_E true -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 +// If the Nozzle or Bed falls when the Z stepper is disabled, set its resting position here. +//#define Z_AFTER_DEACTIVATE Z_HOME_POS //#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated +#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate +#define DEFAULT_MINTRAVELFEEDRATE 0.0 + // Minimum time that a segment needs to take if the buffer is emptied #define DEFAULT_MINSEGMENTTIME 20000 // (µs) diff --git a/config/examples/Felix/DUAL/Configuration_adv.h b/config/examples/Felix/DUAL/Configuration_adv.h index 3f5a3f195d..161f241128 100644 --- a/config/examples/Felix/DUAL/Configuration_adv.h +++ b/config/examples/Felix/DUAL/Configuration_adv.h @@ -820,11 +820,14 @@ #define DISABLE_INACTIVE_Z true // Set to false if the nozzle will fall down on your printed part when print has finished. #define DISABLE_INACTIVE_E true -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 +// If the Nozzle or Bed falls when the Z stepper is disabled, set its resting position here. +//#define Z_AFTER_DEACTIVATE Z_HOME_POS //#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated +#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate +#define DEFAULT_MINTRAVELFEEDRATE 0.0 + // Minimum time that a segment needs to take if the buffer is emptied #define DEFAULT_MINSEGMENTTIME 20000 // (µs) diff --git a/config/examples/Felix/Single/Configuration_adv.h b/config/examples/Felix/Single/Configuration_adv.h index e282f3d6c0..483aafce69 100644 --- a/config/examples/Felix/Single/Configuration_adv.h +++ b/config/examples/Felix/Single/Configuration_adv.h @@ -820,11 +820,14 @@ #define DISABLE_INACTIVE_Z true // Set to false if the nozzle will fall down on your printed part when print has finished. #define DISABLE_INACTIVE_E true -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 +// If the Nozzle or Bed falls when the Z stepper is disabled, set its resting position here. +//#define Z_AFTER_DEACTIVATE Z_HOME_POS //#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated +#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate +#define DEFAULT_MINTRAVELFEEDRATE 0.0 + // Minimum time that a segment needs to take if the buffer is emptied #define DEFAULT_MINSEGMENTTIME 20000 // (µs) diff --git a/config/examples/FlashForge/Creator 2X/Configuration_adv.h b/config/examples/FlashForge/Creator 2X/Configuration_adv.h index c4a66fa04f..e9b706963c 100644 --- a/config/examples/FlashForge/Creator 2X/Configuration_adv.h +++ b/config/examples/FlashForge/Creator 2X/Configuration_adv.h @@ -820,11 +820,14 @@ #define DISABLE_INACTIVE_Z false // Set to false if the nozzle will fall down on your printed part when print has finished. #define DISABLE_INACTIVE_E true -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 +// If the Nozzle or Bed falls when the Z stepper is disabled, set its resting position here. +//#define Z_AFTER_DEACTIVATE Z_HOME_POS //#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated +#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate +#define DEFAULT_MINTRAVELFEEDRATE 0.0 + // Minimum time that a segment needs to take if the buffer is emptied #define DEFAULT_MINSEGMENTTIME 20000 // (µs) diff --git a/config/examples/FlashForge/CreatorPro/Configuration_adv.h b/config/examples/FlashForge/CreatorPro/Configuration_adv.h index b86651ae61..5e582e332b 100644 --- a/config/examples/FlashForge/CreatorPro/Configuration_adv.h +++ b/config/examples/FlashForge/CreatorPro/Configuration_adv.h @@ -820,11 +820,14 @@ #define DISABLE_INACTIVE_Z false // Set to false if the nozzle will fall down on your printed part when print has finished. #define DISABLE_INACTIVE_E true -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 +// If the Nozzle or Bed falls when the Z stepper is disabled, set its resting position here. +//#define Z_AFTER_DEACTIVATE Z_HOME_POS //#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated +#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate +#define DEFAULT_MINTRAVELFEEDRATE 0.0 + // Minimum time that a segment needs to take if the buffer is emptied #define DEFAULT_MINSEGMENTTIME 20000 // (µs) diff --git a/config/examples/FlyingBear/P905H/Configuration_adv.h b/config/examples/FlyingBear/P905H/Configuration_adv.h index 9a5a7e6179..b6f91d7075 100644 --- a/config/examples/FlyingBear/P905H/Configuration_adv.h +++ b/config/examples/FlyingBear/P905H/Configuration_adv.h @@ -821,11 +821,14 @@ #define DISABLE_INACTIVE_Z true // Set to false if the nozzle will fall down on your printed part when print has finished. #define DISABLE_INACTIVE_E true -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 +// If the Nozzle or Bed falls when the Z stepper is disabled, set its resting position here. +//#define Z_AFTER_DEACTIVATE Z_HOME_POS //#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated +#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate +#define DEFAULT_MINTRAVELFEEDRATE 0.0 + // Minimum time that a segment needs to take if the buffer is emptied #define DEFAULT_MINSEGMENTTIME 20000 // (µs) diff --git a/config/examples/FolgerTech/i3-2020/Configuration_adv.h b/config/examples/FolgerTech/i3-2020/Configuration_adv.h index fcf50353ef..2e2d9eb990 100644 --- a/config/examples/FolgerTech/i3-2020/Configuration_adv.h +++ b/config/examples/FolgerTech/i3-2020/Configuration_adv.h @@ -820,11 +820,14 @@ #define DISABLE_INACTIVE_Z true // Set to false if the nozzle will fall down on your printed part when print has finished. #define DISABLE_INACTIVE_E true -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 +// If the Nozzle or Bed falls when the Z stepper is disabled, set its resting position here. +//#define Z_AFTER_DEACTIVATE Z_HOME_POS //#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated +#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate +#define DEFAULT_MINTRAVELFEEDRATE 0.0 + // Minimum time that a segment needs to take if the buffer is emptied #define DEFAULT_MINSEGMENTTIME 20000 // (µs) diff --git a/config/examples/Formbot/Raptor/Configuration_adv.h b/config/examples/Formbot/Raptor/Configuration_adv.h index b7c180a60d..9a86996fb9 100644 --- a/config/examples/Formbot/Raptor/Configuration_adv.h +++ b/config/examples/Formbot/Raptor/Configuration_adv.h @@ -820,11 +820,14 @@ #define DISABLE_INACTIVE_Z true // Set to false if the nozzle will fall down on your printed part when print has finished. #define DISABLE_INACTIVE_E true -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 +// If the Nozzle or Bed falls when the Z stepper is disabled, set its resting position here. +//#define Z_AFTER_DEACTIVATE Z_HOME_POS //#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated +#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate +#define DEFAULT_MINTRAVELFEEDRATE 0.0 + // Minimum time that a segment needs to take if the buffer is emptied #define DEFAULT_MINSEGMENTTIME 20000 // (µs) diff --git a/config/examples/Formbot/T_Rex_2+/Configuration_adv.h b/config/examples/Formbot/T_Rex_2+/Configuration_adv.h index afe5512561..f405fc0368 100644 --- a/config/examples/Formbot/T_Rex_2+/Configuration_adv.h +++ b/config/examples/Formbot/T_Rex_2+/Configuration_adv.h @@ -821,11 +821,14 @@ #define DISABLE_INACTIVE_Z true // Set to false if the nozzle will fall down on your printed part when print has finished. #define DISABLE_INACTIVE_E true -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 +// If the Nozzle or Bed falls when the Z stepper is disabled, set its resting position here. +//#define Z_AFTER_DEACTIVATE Z_HOME_POS //#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated +#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate +#define DEFAULT_MINTRAVELFEEDRATE 0.0 + // Minimum time that a segment needs to take if the buffer is emptied #define DEFAULT_MINSEGMENTTIME 20000 // (µs) diff --git a/config/examples/Formbot/T_Rex_3/Configuration_adv.h b/config/examples/Formbot/T_Rex_3/Configuration_adv.h index ff0582f813..8f9e2b8f87 100644 --- a/config/examples/Formbot/T_Rex_3/Configuration_adv.h +++ b/config/examples/Formbot/T_Rex_3/Configuration_adv.h @@ -825,11 +825,14 @@ #define DISABLE_INACTIVE_Z true // Set to false if the nozzle will fall down on your printed part when print has finished. #define DISABLE_INACTIVE_E true -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 +// If the Nozzle or Bed falls when the Z stepper is disabled, set its resting position here. +//#define Z_AFTER_DEACTIVATE Z_HOME_POS //#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated +#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate +#define DEFAULT_MINTRAVELFEEDRATE 0.0 + // Minimum time that a segment needs to take if the buffer is emptied #define DEFAULT_MINSEGMENTTIME 20000 // (µs) diff --git a/config/examples/Geeetech/A10/Configuration_adv.h b/config/examples/Geeetech/A10/Configuration_adv.h index 2a59d70491..3f949b08bf 100644 --- a/config/examples/Geeetech/A10/Configuration_adv.h +++ b/config/examples/Geeetech/A10/Configuration_adv.h @@ -820,11 +820,14 @@ #define DISABLE_INACTIVE_Z true // Set to false if the nozzle will fall down on your printed part when print has finished. #define DISABLE_INACTIVE_E true -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 +// If the Nozzle or Bed falls when the Z stepper is disabled, set its resting position here. +//#define Z_AFTER_DEACTIVATE Z_HOME_POS //#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated +#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate +#define DEFAULT_MINTRAVELFEEDRATE 0.0 + // Minimum time that a segment needs to take if the buffer is emptied #define DEFAULT_MINSEGMENTTIME 20000 // (µs) diff --git a/config/examples/Geeetech/A10D/Configuration_adv.h b/config/examples/Geeetech/A10D/Configuration_adv.h index ebba1366c9..a5ba6bc4fa 100644 --- a/config/examples/Geeetech/A10D/Configuration_adv.h +++ b/config/examples/Geeetech/A10D/Configuration_adv.h @@ -820,11 +820,14 @@ #define DISABLE_INACTIVE_Z true // Set to false if the nozzle will fall down on your printed part when print has finished. #define DISABLE_INACTIVE_E true -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 +// If the Nozzle or Bed falls when the Z stepper is disabled, set its resting position here. +//#define Z_AFTER_DEACTIVATE Z_HOME_POS //#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated +#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate +#define DEFAULT_MINTRAVELFEEDRATE 0.0 + // Minimum time that a segment needs to take if the buffer is emptied #define DEFAULT_MINSEGMENTTIME 20000 // (µs) diff --git a/config/examples/Geeetech/A10M/Configuration_adv.h b/config/examples/Geeetech/A10M/Configuration_adv.h index b6ad216076..959e274709 100644 --- a/config/examples/Geeetech/A10M/Configuration_adv.h +++ b/config/examples/Geeetech/A10M/Configuration_adv.h @@ -820,11 +820,14 @@ #define DISABLE_INACTIVE_Z true // Set to false if the nozzle will fall down on your printed part when print has finished. #define DISABLE_INACTIVE_E true -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 +// If the Nozzle or Bed falls when the Z stepper is disabled, set its resting position here. +//#define Z_AFTER_DEACTIVATE Z_HOME_POS //#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated +#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate +#define DEFAULT_MINTRAVELFEEDRATE 0.0 + // Minimum time that a segment needs to take if the buffer is emptied #define DEFAULT_MINSEGMENTTIME 20000 // (µs) diff --git a/config/examples/Geeetech/A10T/Configuration_adv.h b/config/examples/Geeetech/A10T/Configuration_adv.h index 0bd5e33aa2..7623e2f8e6 100644 --- a/config/examples/Geeetech/A10T/Configuration_adv.h +++ b/config/examples/Geeetech/A10T/Configuration_adv.h @@ -820,11 +820,14 @@ #define DISABLE_INACTIVE_Z true // Set to false if the nozzle will fall down on your printed part when print has finished. #define DISABLE_INACTIVE_E true -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 +// If the Nozzle or Bed falls when the Z stepper is disabled, set its resting position here. +//#define Z_AFTER_DEACTIVATE Z_HOME_POS //#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated +#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate +#define DEFAULT_MINTRAVELFEEDRATE 0.0 + // Minimum time that a segment needs to take if the buffer is emptied #define DEFAULT_MINSEGMENTTIME 20000 // (µs) diff --git a/config/examples/Geeetech/A20/Configuration_adv.h b/config/examples/Geeetech/A20/Configuration_adv.h index 7c3263b322..fcea617d40 100644 --- a/config/examples/Geeetech/A20/Configuration_adv.h +++ b/config/examples/Geeetech/A20/Configuration_adv.h @@ -820,11 +820,14 @@ #define DISABLE_INACTIVE_Z true // Set to false if the nozzle will fall down on your printed part when print has finished. #define DISABLE_INACTIVE_E true -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 +// If the Nozzle or Bed falls when the Z stepper is disabled, set its resting position here. +//#define Z_AFTER_DEACTIVATE Z_HOME_POS //#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated +#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate +#define DEFAULT_MINTRAVELFEEDRATE 0.0 + // Minimum time that a segment needs to take if the buffer is emptied #define DEFAULT_MINSEGMENTTIME 20000 // (µs) diff --git a/config/examples/Geeetech/A20M/Configuration_adv.h b/config/examples/Geeetech/A20M/Configuration_adv.h index 0d7a3d9cf3..8ccdb83d5f 100644 --- a/config/examples/Geeetech/A20M/Configuration_adv.h +++ b/config/examples/Geeetech/A20M/Configuration_adv.h @@ -820,11 +820,14 @@ #define DISABLE_INACTIVE_Z true // Set to false if the nozzle will fall down on your printed part when print has finished. #define DISABLE_INACTIVE_E true -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 +// If the Nozzle or Bed falls when the Z stepper is disabled, set its resting position here. +//#define Z_AFTER_DEACTIVATE Z_HOME_POS //#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated +#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate +#define DEFAULT_MINTRAVELFEEDRATE 0.0 + // Minimum time that a segment needs to take if the buffer is emptied #define DEFAULT_MINSEGMENTTIME 20000 // (µs) diff --git a/config/examples/Geeetech/A20T/Configuration_adv.h b/config/examples/Geeetech/A20T/Configuration_adv.h index 4df517e155..6635599d48 100644 --- a/config/examples/Geeetech/A20T/Configuration_adv.h +++ b/config/examples/Geeetech/A20T/Configuration_adv.h @@ -820,11 +820,14 @@ #define DISABLE_INACTIVE_Z true // Set to false if the nozzle will fall down on your printed part when print has finished. #define DISABLE_INACTIVE_E true -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 +// If the Nozzle or Bed falls when the Z stepper is disabled, set its resting position here. +//#define Z_AFTER_DEACTIVATE Z_HOME_POS //#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated +#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate +#define DEFAULT_MINTRAVELFEEDRATE 0.0 + // Minimum time that a segment needs to take if the buffer is emptied #define DEFAULT_MINSEGMENTTIME 20000 // (µs) diff --git a/config/examples/Geeetech/A30/Configuration_adv.h b/config/examples/Geeetech/A30/Configuration_adv.h index 6f00a6ba7d..fc4e38801e 100644 --- a/config/examples/Geeetech/A30/Configuration_adv.h +++ b/config/examples/Geeetech/A30/Configuration_adv.h @@ -820,11 +820,14 @@ #define DISABLE_INACTIVE_Z true // Set to false if the nozzle will fall down on your printed part when print has finished. #define DISABLE_INACTIVE_E true -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 +// If the Nozzle or Bed falls when the Z stepper is disabled, set its resting position here. +//#define Z_AFTER_DEACTIVATE Z_HOME_POS //#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated +#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate +#define DEFAULT_MINTRAVELFEEDRATE 0.0 + // Minimum time that a segment needs to take if the buffer is emptied #define DEFAULT_MINSEGMENTTIME 20000 // (µs) diff --git a/config/examples/Geeetech/D200/Configuration_adv.h b/config/examples/Geeetech/D200/Configuration_adv.h index 8136737bc5..8ad6a1bd44 100644 --- a/config/examples/Geeetech/D200/Configuration_adv.h +++ b/config/examples/Geeetech/D200/Configuration_adv.h @@ -820,11 +820,14 @@ #define DISABLE_INACTIVE_Z true // Set to false if the nozzle will fall down on your printed part when print has finished. #define DISABLE_INACTIVE_E true -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 +// If the Nozzle or Bed falls when the Z stepper is disabled, set its resting position here. +//#define Z_AFTER_DEACTIVATE Z_HOME_POS //#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated +#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate +#define DEFAULT_MINTRAVELFEEDRATE 0.0 + // Minimum time that a segment needs to take if the buffer is emptied #define DEFAULT_MINSEGMENTTIME 20000 // (µs) diff --git a/config/examples/Geeetech/Duplicator5/Configuration_adv.h b/config/examples/Geeetech/Duplicator5/Configuration_adv.h index 34ab83df95..79cd438468 100644 --- a/config/examples/Geeetech/Duplicator5/Configuration_adv.h +++ b/config/examples/Geeetech/Duplicator5/Configuration_adv.h @@ -820,11 +820,14 @@ #define DISABLE_INACTIVE_Z true // Set to false if the nozzle will fall down on your printed part when print has finished. #define DISABLE_INACTIVE_E true -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 +// If the Nozzle or Bed falls when the Z stepper is disabled, set its resting position here. +//#define Z_AFTER_DEACTIVATE Z_HOME_POS //#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated +#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate +#define DEFAULT_MINTRAVELFEEDRATE 0.0 + // Minimum time that a segment needs to take if the buffer is emptied #define DEFAULT_MINSEGMENTTIME 20000 // (µs) diff --git a/config/examples/Geeetech/E180/Configuration_adv.h b/config/examples/Geeetech/E180/Configuration_adv.h index 7ad07bef0a..6b058b950d 100644 --- a/config/examples/Geeetech/E180/Configuration_adv.h +++ b/config/examples/Geeetech/E180/Configuration_adv.h @@ -820,11 +820,14 @@ #define DISABLE_INACTIVE_Z true // Set to false if the nozzle will fall down on your printed part when print has finished. #define DISABLE_INACTIVE_E true -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 +// If the Nozzle or Bed falls when the Z stepper is disabled, set its resting position here. +//#define Z_AFTER_DEACTIVATE Z_HOME_POS //#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated +#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate +#define DEFAULT_MINTRAVELFEEDRATE 0.0 + // Minimum time that a segment needs to take if the buffer is emptied #define DEFAULT_MINSEGMENTTIME 20000 // (µs) diff --git a/config/examples/Geeetech/M201/Configuration_adv.h b/config/examples/Geeetech/M201/Configuration_adv.h index 8b0b4fff54..dc64e29036 100644 --- a/config/examples/Geeetech/M201/Configuration_adv.h +++ b/config/examples/Geeetech/M201/Configuration_adv.h @@ -820,11 +820,14 @@ #define DISABLE_INACTIVE_Z true // Set to false if the nozzle will fall down on your printed part when print has finished. #define DISABLE_INACTIVE_E true -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 +// If the Nozzle or Bed falls when the Z stepper is disabled, set its resting position here. +//#define Z_AFTER_DEACTIVATE Z_HOME_POS //#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated +#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate +#define DEFAULT_MINTRAVELFEEDRATE 0.0 + // Minimum time that a segment needs to take if the buffer is emptied #define DEFAULT_MINSEGMENTTIME 20000 // (µs) diff --git a/config/examples/Geeetech/MeCreator2/Configuration_adv.h b/config/examples/Geeetech/MeCreator2/Configuration_adv.h index 3e5e585c49..7de9c68427 100644 --- a/config/examples/Geeetech/MeCreator2/Configuration_adv.h +++ b/config/examples/Geeetech/MeCreator2/Configuration_adv.h @@ -820,11 +820,14 @@ #define DISABLE_INACTIVE_Z true // Set to false if the nozzle will fall down on your printed part when print has finished. #define DISABLE_INACTIVE_E true -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 +// If the Nozzle or Bed falls when the Z stepper is disabled, set its resting position here. +//#define Z_AFTER_DEACTIVATE Z_HOME_POS //#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated +#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate +#define DEFAULT_MINTRAVELFEEDRATE 0.0 + // Minimum time that a segment needs to take if the buffer is emptied #define DEFAULT_MINSEGMENTTIME 20000 // (µs) diff --git a/config/examples/Geeetech/Me_creator/Configuration_adv.h b/config/examples/Geeetech/Me_creator/Configuration_adv.h index aa8d53d205..0bba4b95fa 100644 --- a/config/examples/Geeetech/Me_creator/Configuration_adv.h +++ b/config/examples/Geeetech/Me_creator/Configuration_adv.h @@ -820,11 +820,14 @@ #define DISABLE_INACTIVE_Z true // Set to false if the nozzle will fall down on your printed part when print has finished. #define DISABLE_INACTIVE_E true -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 +// If the Nozzle or Bed falls when the Z stepper is disabled, set its resting position here. +//#define Z_AFTER_DEACTIVATE Z_HOME_POS //#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated +#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate +#define DEFAULT_MINTRAVELFEEDRATE 0.0 + // Minimum time that a segment needs to take if the buffer is emptied #define DEFAULT_MINSEGMENTTIME 20000 // (µs) diff --git a/config/examples/Geeetech/Me_ducer/Configuration_adv.h b/config/examples/Geeetech/Me_ducer/Configuration_adv.h index 2492c95b45..038dd29938 100644 --- a/config/examples/Geeetech/Me_ducer/Configuration_adv.h +++ b/config/examples/Geeetech/Me_ducer/Configuration_adv.h @@ -820,11 +820,14 @@ #define DISABLE_INACTIVE_Z true // Set to false if the nozzle will fall down on your printed part when print has finished. #define DISABLE_INACTIVE_E true -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 +// If the Nozzle or Bed falls when the Z stepper is disabled, set its resting position here. +//#define Z_AFTER_DEACTIVATE Z_HOME_POS //#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated +#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate +#define DEFAULT_MINTRAVELFEEDRATE 0.0 + // Minimum time that a segment needs to take if the buffer is emptied #define DEFAULT_MINSEGMENTTIME 20000 // (µs) diff --git a/config/examples/Geeetech/PI3A PRO/Configuration_adv.h b/config/examples/Geeetech/PI3A PRO/Configuration_adv.h index 01ada1b80c..126ae719e7 100644 --- a/config/examples/Geeetech/PI3A PRO/Configuration_adv.h +++ b/config/examples/Geeetech/PI3A PRO/Configuration_adv.h @@ -820,11 +820,14 @@ #define DISABLE_INACTIVE_Z true // Set to false if the nozzle will fall down on your printed part when print has finished. #define DISABLE_INACTIVE_E true -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 +// If the Nozzle or Bed falls when the Z stepper is disabled, set its resting position here. +//#define Z_AFTER_DEACTIVATE Z_HOME_POS //#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated +#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate +#define DEFAULT_MINTRAVELFEEDRATE 0.0 + // Minimum time that a segment needs to take if the buffer is emptied #define DEFAULT_MINSEGMENTTIME 20000 // (µs) diff --git a/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h b/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h index 35da34d7cc..10f7be31eb 100644 --- a/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h +++ b/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h @@ -820,11 +820,14 @@ #define DISABLE_INACTIVE_Z true // Set to false if the nozzle will fall down on your printed part when print has finished. #define DISABLE_INACTIVE_E true -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 +// If the Nozzle or Bed falls when the Z stepper is disabled, set its resting position here. +//#define Z_AFTER_DEACTIVATE Z_HOME_POS //#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated +#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate +#define DEFAULT_MINTRAVELFEEDRATE 0.0 + // Minimum time that a segment needs to take if the buffer is emptied #define DEFAULT_MINSEGMENTTIME 20000 // (µs) diff --git a/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h b/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h index c1b392352f..27597e0ee3 100644 --- a/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h +++ b/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h @@ -820,11 +820,14 @@ #define DISABLE_INACTIVE_Z true // Set to false if the nozzle will fall down on your printed part when print has finished. #define DISABLE_INACTIVE_E true -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 +// If the Nozzle or Bed falls when the Z stepper is disabled, set its resting position here. +//#define Z_AFTER_DEACTIVATE Z_HOME_POS //#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated +#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate +#define DEFAULT_MINTRAVELFEEDRATE 0.0 + // Minimum time that a segment needs to take if the buffer is emptied #define DEFAULT_MINSEGMENTTIME 20000 // (µs) diff --git a/config/examples/HMS434/Configuration_adv.h b/config/examples/HMS434/Configuration_adv.h index 0ab091ea66..a31a7ff631 100644 --- a/config/examples/HMS434/Configuration_adv.h +++ b/config/examples/HMS434/Configuration_adv.h @@ -811,11 +811,14 @@ #define DISABLE_INACTIVE_Z true // Set to false if the nozzle will fall down on your printed part when print has finished. #define DISABLE_INACTIVE_E true -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 +// If the Nozzle or Bed falls when the Z stepper is disabled, set its resting position here. +//#define Z_AFTER_DEACTIVATE Z_HOME_POS //#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated +#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate +#define DEFAULT_MINTRAVELFEEDRATE 0.0 + // Minimum time that a segment needs to take if the buffer is emptied #define DEFAULT_MINSEGMENTTIME 20000 // (µs) diff --git a/config/examples/Infitary/i3-M508/Configuration_adv.h b/config/examples/Infitary/i3-M508/Configuration_adv.h index 0b60d0b512..5916705141 100644 --- a/config/examples/Infitary/i3-M508/Configuration_adv.h +++ b/config/examples/Infitary/i3-M508/Configuration_adv.h @@ -820,11 +820,14 @@ #define DISABLE_INACTIVE_Z true // Set to false if the nozzle will fall down on your printed part when print has finished. #define DISABLE_INACTIVE_E true -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 +// If the Nozzle or Bed falls when the Z stepper is disabled, set its resting position here. +//#define Z_AFTER_DEACTIVATE Z_HOME_POS //#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated +#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate +#define DEFAULT_MINTRAVELFEEDRATE 0.0 + // Minimum time that a segment needs to take if the buffer is emptied #define DEFAULT_MINSEGMENTTIME 20000 // (µs) diff --git a/config/examples/Intamsys/FunmatHT_4988/Configuration_adv.h b/config/examples/Intamsys/FunmatHT_4988/Configuration_adv.h index 86ecd2c657..2cc992bace 100644 --- a/config/examples/Intamsys/FunmatHT_4988/Configuration_adv.h +++ b/config/examples/Intamsys/FunmatHT_4988/Configuration_adv.h @@ -820,11 +820,14 @@ #define DISABLE_INACTIVE_Z true // Set to false if the nozzle will fall down on your printed part when print has finished. #define DISABLE_INACTIVE_E true -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 +// If the Nozzle or Bed falls when the Z stepper is disabled, set its resting position here. +//#define Z_AFTER_DEACTIVATE Z_HOME_POS //#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated +#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate +#define DEFAULT_MINTRAVELFEEDRATE 0.0 + // Minimum time that a segment needs to take if the buffer is emptied #define DEFAULT_MINSEGMENTTIME 20000 // (µs) diff --git a/config/examples/JGAurora/A1/Configuration_adv.h b/config/examples/JGAurora/A1/Configuration_adv.h index 1d1a862c80..1f89022548 100644 --- a/config/examples/JGAurora/A1/Configuration_adv.h +++ b/config/examples/JGAurora/A1/Configuration_adv.h @@ -825,11 +825,14 @@ #define DISABLE_INACTIVE_Z true // Set to false if the nozzle will fall down on your printed part when print has finished. #define DISABLE_INACTIVE_E true -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 +// If the Nozzle or Bed falls when the Z stepper is disabled, set its resting position here. +//#define Z_AFTER_DEACTIVATE Z_HOME_POS //#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated +#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate +#define DEFAULT_MINTRAVELFEEDRATE 0.0 + // Minimum time that a segment needs to take if the buffer is emptied #define DEFAULT_MINSEGMENTTIME 20000 // (µs) diff --git a/config/examples/JGAurora/A5/Configuration_adv.h b/config/examples/JGAurora/A5/Configuration_adv.h index 8429939798..8a9b1dc195 100644 --- a/config/examples/JGAurora/A5/Configuration_adv.h +++ b/config/examples/JGAurora/A5/Configuration_adv.h @@ -820,11 +820,14 @@ #define DISABLE_INACTIVE_Z true // Set to false if the nozzle will fall down on your printed part when print has finished. #define DISABLE_INACTIVE_E true -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 +// If the Nozzle or Bed falls when the Z stepper is disabled, set its resting position here. +//#define Z_AFTER_DEACTIVATE Z_HOME_POS //#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated +#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate +#define DEFAULT_MINTRAVELFEEDRATE 0.0 + // Minimum time that a segment needs to take if the buffer is emptied #define DEFAULT_MINSEGMENTTIME 20000 // (µs) diff --git a/config/examples/JGAurora/A5S/Configuration_adv.h b/config/examples/JGAurora/A5S/Configuration_adv.h index 5317efe134..a3a8711bb5 100644 --- a/config/examples/JGAurora/A5S/Configuration_adv.h +++ b/config/examples/JGAurora/A5S/Configuration_adv.h @@ -825,11 +825,14 @@ #define DISABLE_INACTIVE_Z true // Set to false if the nozzle will fall down on your printed part when print has finished. #define DISABLE_INACTIVE_E true -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 +// If the Nozzle or Bed falls when the Z stepper is disabled, set its resting position here. +//#define Z_AFTER_DEACTIVATE Z_HOME_POS //#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated +#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate +#define DEFAULT_MINTRAVELFEEDRATE 0.0 + // Minimum time that a segment needs to take if the buffer is emptied #define DEFAULT_MINSEGMENTTIME 20000 // (µs) diff --git a/config/examples/JGAurora/Magic/Configuration_adv.h b/config/examples/JGAurora/Magic/Configuration_adv.h index 2bbce595dc..d8dd7362fb 100644 --- a/config/examples/JGAurora/Magic/Configuration_adv.h +++ b/config/examples/JGAurora/Magic/Configuration_adv.h @@ -820,11 +820,14 @@ #define DISABLE_INACTIVE_Z true // Set to false if the nozzle will fall down on your printed part when print has finished. #define DISABLE_INACTIVE_E true -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 +// If the Nozzle or Bed falls when the Z stepper is disabled, set its resting position here. +//#define Z_AFTER_DEACTIVATE Z_HOME_POS //#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated +#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate +#define DEFAULT_MINTRAVELFEEDRATE 0.0 + // Minimum time that a segment needs to take if the buffer is emptied #define DEFAULT_MINSEGMENTTIME 20000 // (µs) diff --git a/config/examples/Kingroon/KP3/Configuration_adv.h b/config/examples/Kingroon/KP3/Configuration_adv.h index fe104894c9..227a94855a 100644 --- a/config/examples/Kingroon/KP3/Configuration_adv.h +++ b/config/examples/Kingroon/KP3/Configuration_adv.h @@ -820,11 +820,14 @@ #define DISABLE_INACTIVE_Z true // Set to false if the nozzle will fall down on your printed part when print has finished. #define DISABLE_INACTIVE_E true -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 +// If the Nozzle or Bed falls when the Z stepper is disabled, set its resting position here. +//#define Z_AFTER_DEACTIVATE Z_HOME_POS //#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated +#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate +#define DEFAULT_MINTRAVELFEEDRATE 0.0 + // Minimum time that a segment needs to take if the buffer is emptied #define DEFAULT_MINSEGMENTTIME 20000 // (µs) diff --git a/config/examples/MBot/Cube/Configuration_adv.h b/config/examples/MBot/Cube/Configuration_adv.h index 8ea2f51c93..e768bc9814 100644 --- a/config/examples/MBot/Cube/Configuration_adv.h +++ b/config/examples/MBot/Cube/Configuration_adv.h @@ -820,11 +820,14 @@ #define DISABLE_INACTIVE_Z false // Set to false if the nozzle will fall down on your printed part when print has finished. #define DISABLE_INACTIVE_E true -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 +// If the Nozzle or Bed falls when the Z stepper is disabled, set its resting position here. +//#define Z_AFTER_DEACTIVATE Z_HOME_POS //#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated +#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate +#define DEFAULT_MINTRAVELFEEDRATE 0.0 + // Minimum time that a segment needs to take if the buffer is emptied #define DEFAULT_MINSEGMENTTIME 20000 // (µs) diff --git a/config/examples/MakerFarm/Pegasus_12/Configuration_adv.h b/config/examples/MakerFarm/Pegasus_12/Configuration_adv.h index 7c73c5503e..7fed72d76c 100644 --- a/config/examples/MakerFarm/Pegasus_12/Configuration_adv.h +++ b/config/examples/MakerFarm/Pegasus_12/Configuration_adv.h @@ -820,11 +820,14 @@ #define DISABLE_INACTIVE_Z false // Set to false if the nozzle will fall down on your printed part when print has finished. #define DISABLE_INACTIVE_E true -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 +// If the Nozzle or Bed falls when the Z stepper is disabled, set its resting position here. +//#define Z_AFTER_DEACTIVATE Z_HOME_POS //#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated +#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate +#define DEFAULT_MINTRAVELFEEDRATE 0.0 + // Minimum time that a segment needs to take if the buffer is emptied #define DEFAULT_MINSEGMENTTIME 20000 // (µs) diff --git a/config/examples/MakerParts/Configuration_adv.h b/config/examples/MakerParts/Configuration_adv.h index 81faea879c..d6c1c72d85 100644 --- a/config/examples/MakerParts/Configuration_adv.h +++ b/config/examples/MakerParts/Configuration_adv.h @@ -820,11 +820,14 @@ #define DISABLE_INACTIVE_Z true // Set to false if the nozzle will fall down on your printed part when print has finished. #define DISABLE_INACTIVE_E true -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 +// If the Nozzle or Bed falls when the Z stepper is disabled, set its resting position here. +//#define Z_AFTER_DEACTIVATE Z_HOME_POS //#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated +#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate +#define DEFAULT_MINTRAVELFEEDRATE 0.0 + // Minimum time that a segment needs to take if the buffer is emptied #define DEFAULT_MINSEGMENTTIME 20000 // (µs) diff --git a/config/examples/Malyan/M150/Configuration_adv.h b/config/examples/Malyan/M150/Configuration_adv.h index 58fe91a7f1..2d64040582 100644 --- a/config/examples/Malyan/M150/Configuration_adv.h +++ b/config/examples/Malyan/M150/Configuration_adv.h @@ -820,11 +820,14 @@ #define DISABLE_INACTIVE_Z true // Set to false if the nozzle will fall down on your printed part when print has finished. #define DISABLE_INACTIVE_E true -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 +// If the Nozzle or Bed falls when the Z stepper is disabled, set its resting position here. +//#define Z_AFTER_DEACTIVATE Z_HOME_POS //#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated +#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate +#define DEFAULT_MINTRAVELFEEDRATE 0.0 + // Minimum time that a segment needs to take if the buffer is emptied #define DEFAULT_MINSEGMENTTIME 20000 // (µs) diff --git a/config/examples/Malyan/M200/Configuration_adv.h b/config/examples/Malyan/M200/Configuration_adv.h index 41aa02d432..bcf89ac347 100644 --- a/config/examples/Malyan/M200/Configuration_adv.h +++ b/config/examples/Malyan/M200/Configuration_adv.h @@ -822,11 +822,14 @@ #define DISABLE_INACTIVE_Z true // Set to false if the nozzle will fall down on your printed part when print has finished. #define DISABLE_INACTIVE_E true -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 +// If the Nozzle or Bed falls when the Z stepper is disabled, set its resting position here. +//#define Z_AFTER_DEACTIVATE Z_HOME_POS //#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated +#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate +#define DEFAULT_MINTRAVELFEEDRATE 0.0 + // Minimum time that a segment needs to take if the buffer is emptied #define DEFAULT_MINSEGMENTTIME 20000 // (µs) diff --git a/config/examples/Micromake/C1/enhanced/Configuration_adv.h b/config/examples/Micromake/C1/enhanced/Configuration_adv.h index 34955980f9..88f9f22f44 100644 --- a/config/examples/Micromake/C1/enhanced/Configuration_adv.h +++ b/config/examples/Micromake/C1/enhanced/Configuration_adv.h @@ -820,11 +820,14 @@ #define DISABLE_INACTIVE_Z true // Set to false if the nozzle will fall down on your printed part when print has finished. #define DISABLE_INACTIVE_E true -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 +// If the Nozzle or Bed falls when the Z stepper is disabled, set its resting position here. +//#define Z_AFTER_DEACTIVATE Z_HOME_POS //#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated +#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate +#define DEFAULT_MINTRAVELFEEDRATE 0.0 + // Minimum time that a segment needs to take if the buffer is emptied #define DEFAULT_MINSEGMENTTIME 20000 // (µs) diff --git a/config/examples/Mks/Robin/Configuration_adv.h b/config/examples/Mks/Robin/Configuration_adv.h index bb32f13604..dd9ad856a4 100644 --- a/config/examples/Mks/Robin/Configuration_adv.h +++ b/config/examples/Mks/Robin/Configuration_adv.h @@ -820,11 +820,14 @@ #define DISABLE_INACTIVE_Z true // Set to false if the nozzle will fall down on your printed part when print has finished. #define DISABLE_INACTIVE_E true -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 +// If the Nozzle or Bed falls when the Z stepper is disabled, set its resting position here. +//#define Z_AFTER_DEACTIVATE Z_HOME_POS //#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated +#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate +#define DEFAULT_MINTRAVELFEEDRATE 0.0 + // Minimum time that a segment needs to take if the buffer is emptied #define DEFAULT_MINSEGMENTTIME 20000 // (µs) diff --git a/config/examples/Mks/Sbase/Configuration_adv.h b/config/examples/Mks/Sbase/Configuration_adv.h index 92e169858b..cbb034e976 100644 --- a/config/examples/Mks/Sbase/Configuration_adv.h +++ b/config/examples/Mks/Sbase/Configuration_adv.h @@ -820,11 +820,14 @@ #define DISABLE_INACTIVE_Z true // Set to false if the nozzle will fall down on your printed part when print has finished. #define DISABLE_INACTIVE_E true -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 +// If the Nozzle or Bed falls when the Z stepper is disabled, set its resting position here. +//#define Z_AFTER_DEACTIVATE Z_HOME_POS //#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated +#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate +#define DEFAULT_MINTRAVELFEEDRATE 0.0 + // Minimum time that a segment needs to take if the buffer is emptied #define DEFAULT_MINSEGMENTTIME 20000 // (µs) diff --git a/config/examples/Modix/Big60/Configuration_adv.h b/config/examples/Modix/Big60/Configuration_adv.h index 78336f4966..e727e6c404 100644 --- a/config/examples/Modix/Big60/Configuration_adv.h +++ b/config/examples/Modix/Big60/Configuration_adv.h @@ -820,11 +820,14 @@ #define DISABLE_INACTIVE_Z true // Set to false if the nozzle will fall down on your printed part when print has finished. #define DISABLE_INACTIVE_E true -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 +// If the Nozzle or Bed falls when the Z stepper is disabled, set its resting position here. +//#define Z_AFTER_DEACTIVATE Z_HOME_POS //#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated +#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate +#define DEFAULT_MINTRAVELFEEDRATE 0.0 + // Minimum time that a segment needs to take if the buffer is emptied #define DEFAULT_MINSEGMENTTIME 20000 // (µs) diff --git a/config/examples/Ortur 4/Configuration_adv.h b/config/examples/Ortur 4/Configuration_adv.h index e061fd728d..0e08c4c180 100644 --- a/config/examples/Ortur 4/Configuration_adv.h +++ b/config/examples/Ortur 4/Configuration_adv.h @@ -820,11 +820,14 @@ #define DISABLE_INACTIVE_Z true // Set to false if the nozzle will fall down on your printed part when print has finished. #define DISABLE_INACTIVE_E true -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 +// If the Nozzle or Bed falls when the Z stepper is disabled, set its resting position here. +//#define Z_AFTER_DEACTIVATE Z_HOME_POS //#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated +#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate +#define DEFAULT_MINTRAVELFEEDRATE 0.0 + // Minimum time that a segment needs to take if the buffer is emptied #define DEFAULT_MINSEGMENTTIME 20000 // (µs) diff --git a/config/examples/Prusa/MK3S-BigTreeTech-BTT002/Configuration_adv.h b/config/examples/Prusa/MK3S-BigTreeTech-BTT002/Configuration_adv.h index e99c4160d1..584c66abaf 100644 --- a/config/examples/Prusa/MK3S-BigTreeTech-BTT002/Configuration_adv.h +++ b/config/examples/Prusa/MK3S-BigTreeTech-BTT002/Configuration_adv.h @@ -820,11 +820,14 @@ #define DISABLE_INACTIVE_Z false // Set to false if the nozzle will fall down on your printed part when print has finished. #define DISABLE_INACTIVE_E true -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 +// If the Nozzle or Bed falls when the Z stepper is disabled, set its resting position here. +//#define Z_AFTER_DEACTIVATE Z_HOME_POS //#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated +#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate +#define DEFAULT_MINTRAVELFEEDRATE 0.0 + // Minimum time that a segment needs to take if the buffer is emptied #define DEFAULT_MINSEGMENTTIME 20000 // (µs) diff --git a/config/examples/Qidi/Qidi 1/Configuration_adv.h b/config/examples/Qidi/Qidi 1/Configuration_adv.h index 6a2b78bc0a..257c885b1b 100644 --- a/config/examples/Qidi/Qidi 1/Configuration_adv.h +++ b/config/examples/Qidi/Qidi 1/Configuration_adv.h @@ -820,11 +820,14 @@ #define DISABLE_INACTIVE_Z false // Set to false if the nozzle will fall down on your printed part when print has finished. #define DISABLE_INACTIVE_E true -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 +// If the Nozzle or Bed falls when the Z stepper is disabled, set its resting position here. +//#define Z_AFTER_DEACTIVATE Z_HOME_POS //#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated +#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate +#define DEFAULT_MINTRAVELFEEDRATE 0.0 + // Minimum time that a segment needs to take if the buffer is emptied #define DEFAULT_MINSEGMENTTIME 20000 // (µs) diff --git a/config/examples/RapideLite/RL200/Configuration_adv.h b/config/examples/RapideLite/RL200/Configuration_adv.h index c5743f9d9b..9f255ef41c 100644 --- a/config/examples/RapideLite/RL200/Configuration_adv.h +++ b/config/examples/RapideLite/RL200/Configuration_adv.h @@ -820,11 +820,14 @@ #define DISABLE_INACTIVE_Z true // Set to false if the nozzle will fall down on your printed part when print has finished. #define DISABLE_INACTIVE_E true -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 +// If the Nozzle or Bed falls when the Z stepper is disabled, set its resting position here. +//#define Z_AFTER_DEACTIVATE Z_HOME_POS //#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated +#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate +#define DEFAULT_MINTRAVELFEEDRATE 0.0 + // Minimum time that a segment needs to take if the buffer is emptied #define DEFAULT_MINSEGMENTTIME 20000 // (µs) diff --git a/config/examples/Renkforce/RF100/Configuration_adv.h b/config/examples/Renkforce/RF100/Configuration_adv.h index ce8501ff5b..74d768d7f9 100644 --- a/config/examples/Renkforce/RF100/Configuration_adv.h +++ b/config/examples/Renkforce/RF100/Configuration_adv.h @@ -820,11 +820,14 @@ #define DISABLE_INACTIVE_Z true // Set to false if the nozzle will fall down on your printed part when print has finished. #define DISABLE_INACTIVE_E true -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 +// If the Nozzle or Bed falls when the Z stepper is disabled, set its resting position here. +//#define Z_AFTER_DEACTIVATE Z_HOME_POS //#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated +#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate +#define DEFAULT_MINTRAVELFEEDRATE 0.0 + // Minimum time that a segment needs to take if the buffer is emptied #define DEFAULT_MINSEGMENTTIME 20000 // (µs) diff --git a/config/examples/Renkforce/RF100XL/Configuration_adv.h b/config/examples/Renkforce/RF100XL/Configuration_adv.h index 2f5729768d..8da60a1ef7 100644 --- a/config/examples/Renkforce/RF100XL/Configuration_adv.h +++ b/config/examples/Renkforce/RF100XL/Configuration_adv.h @@ -820,11 +820,14 @@ #define DISABLE_INACTIVE_Z true // Set to false if the nozzle will fall down on your printed part when print has finished. #define DISABLE_INACTIVE_E true -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 +// If the Nozzle or Bed falls when the Z stepper is disabled, set its resting position here. +//#define Z_AFTER_DEACTIVATE Z_HOME_POS //#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated +#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate +#define DEFAULT_MINTRAVELFEEDRATE 0.0 + // Minimum time that a segment needs to take if the buffer is emptied #define DEFAULT_MINSEGMENTTIME 20000 // (µs) diff --git a/config/examples/Renkforce/RF100v2/Configuration_adv.h b/config/examples/Renkforce/RF100v2/Configuration_adv.h index a37d1939e0..99ee8fcef9 100644 --- a/config/examples/Renkforce/RF100v2/Configuration_adv.h +++ b/config/examples/Renkforce/RF100v2/Configuration_adv.h @@ -820,11 +820,14 @@ #define DISABLE_INACTIVE_Z true // Set to false if the nozzle will fall down on your printed part when print has finished. #define DISABLE_INACTIVE_E true -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 +// If the Nozzle or Bed falls when the Z stepper is disabled, set its resting position here. +//#define Z_AFTER_DEACTIVATE Z_HOME_POS //#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated +#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate +#define DEFAULT_MINTRAVELFEEDRATE 0.0 + // Minimum time that a segment needs to take if the buffer is emptied #define DEFAULT_MINSEGMENTTIME 20000 // (µs) diff --git a/config/examples/RigidBot/Configuration_adv.h b/config/examples/RigidBot/Configuration_adv.h index 3eb7335fa7..a03f34a4bd 100644 --- a/config/examples/RigidBot/Configuration_adv.h +++ b/config/examples/RigidBot/Configuration_adv.h @@ -820,11 +820,14 @@ #define DISABLE_INACTIVE_Z true // Set to false if the nozzle will fall down on your printed part when print has finished. #define DISABLE_INACTIVE_E true -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 +// If the Nozzle or Bed falls when the Z stepper is disabled, set its resting position here. +//#define Z_AFTER_DEACTIVATE Z_HOME_POS //#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated +#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate +#define DEFAULT_MINTRAVELFEEDRATE 0.0 + // Minimum time that a segment needs to take if the buffer is emptied #define DEFAULT_MINSEGMENTTIME 20000 // (µs) diff --git a/config/examples/SCARA/MP_SCARA/Configuration_adv.h b/config/examples/SCARA/MP_SCARA/Configuration_adv.h index 8eff1a8fc9..89fa0be11f 100644 --- a/config/examples/SCARA/MP_SCARA/Configuration_adv.h +++ b/config/examples/SCARA/MP_SCARA/Configuration_adv.h @@ -817,11 +817,14 @@ #define DISABLE_INACTIVE_Z true // Set to false if the nozzle will fall down on your printed part when print has finished. #define DISABLE_INACTIVE_E true -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 +// If the Nozzle or Bed falls when the Z stepper is disabled, set its resting position here. +//#define Z_AFTER_DEACTIVATE Z_HOME_POS //#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated +#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate +#define DEFAULT_MINTRAVELFEEDRATE 0.0 + // Minimum time that a segment needs to take if the buffer is emptied #define DEFAULT_MINSEGMENTTIME 20000 // (µs) diff --git a/config/examples/SCARA/Morgan/Configuration_adv.h b/config/examples/SCARA/Morgan/Configuration_adv.h index 0bef6c5606..36f2fdb634 100644 --- a/config/examples/SCARA/Morgan/Configuration_adv.h +++ b/config/examples/SCARA/Morgan/Configuration_adv.h @@ -817,11 +817,14 @@ #define DISABLE_INACTIVE_Z true // Set to false if the nozzle will fall down on your printed part when print has finished. #define DISABLE_INACTIVE_E true -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 +// If the Nozzle or Bed falls when the Z stepper is disabled, set its resting position here. +//#define Z_AFTER_DEACTIVATE Z_HOME_POS //#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated +#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate +#define DEFAULT_MINTRAVELFEEDRATE 0.0 + // Minimum time that a segment needs to take if the buffer is emptied #define DEFAULT_MINSEGMENTTIME 20000 // (µs) diff --git a/config/examples/STM32/Black_STM32F407VET6/Configuration_adv.h b/config/examples/STM32/Black_STM32F407VET6/Configuration_adv.h index 893b5fd879..57b7db3635 100644 --- a/config/examples/STM32/Black_STM32F407VET6/Configuration_adv.h +++ b/config/examples/STM32/Black_STM32F407VET6/Configuration_adv.h @@ -820,11 +820,14 @@ #define DISABLE_INACTIVE_Z true // Set to false if the nozzle will fall down on your printed part when print has finished. #define DISABLE_INACTIVE_E true -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 +// If the Nozzle or Bed falls when the Z stepper is disabled, set its resting position here. +//#define Z_AFTER_DEACTIVATE Z_HOME_POS //#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated +#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate +#define DEFAULT_MINTRAVELFEEDRATE 0.0 + // Minimum time that a segment needs to take if the buffer is emptied #define DEFAULT_MINSEGMENTTIME 20000 // (µs) diff --git a/config/examples/Sanguinololu/Configuration_adv.h b/config/examples/Sanguinololu/Configuration_adv.h index 89890e5cbe..c0fb4a4d05 100644 --- a/config/examples/Sanguinololu/Configuration_adv.h +++ b/config/examples/Sanguinololu/Configuration_adv.h @@ -820,11 +820,14 @@ #define DISABLE_INACTIVE_Z true // Set to false if the nozzle will fall down on your printed part when print has finished. #define DISABLE_INACTIVE_E true -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 +// If the Nozzle or Bed falls when the Z stepper is disabled, set its resting position here. +//#define Z_AFTER_DEACTIVATE Z_HOME_POS //#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated +#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate +#define DEFAULT_MINTRAVELFEEDRATE 0.0 + // Minimum time that a segment needs to take if the buffer is emptied #define DEFAULT_MINSEGMENTTIME 20000 // (µs) diff --git a/config/examples/Sovol/SV-01/Configuration_adv.h b/config/examples/Sovol/SV-01/Configuration_adv.h index 06d675a359..4e21970ccb 100644 --- a/config/examples/Sovol/SV-01/Configuration_adv.h +++ b/config/examples/Sovol/SV-01/Configuration_adv.h @@ -820,11 +820,14 @@ #define DISABLE_INACTIVE_Z true // Set to false if the nozzle will fall down on your printed part when print has finished. #define DISABLE_INACTIVE_E true -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 +// If the Nozzle or Bed falls when the Z stepper is disabled, set its resting position here. +//#define Z_AFTER_DEACTIVATE Z_HOME_POS //#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated +#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate +#define DEFAULT_MINTRAVELFEEDRATE 0.0 + // Minimum time that a segment needs to take if the buffer is emptied #define DEFAULT_MINSEGMENTTIME 20000 // (µs) diff --git a/config/examples/Tevo/Michelangelo/Configuration_adv.h b/config/examples/Tevo/Michelangelo/Configuration_adv.h index 3f1a51926c..6d0d2ddc95 100644 --- a/config/examples/Tevo/Michelangelo/Configuration_adv.h +++ b/config/examples/Tevo/Michelangelo/Configuration_adv.h @@ -820,11 +820,14 @@ #define DISABLE_INACTIVE_Z true // Set to false if the nozzle will fall down on your printed part when print has finished. #define DISABLE_INACTIVE_E true -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 +// If the Nozzle or Bed falls when the Z stepper is disabled, set its resting position here. +//#define Z_AFTER_DEACTIVATE Z_HOME_POS //#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated +#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate +#define DEFAULT_MINTRAVELFEEDRATE 0.0 + // Minimum time that a segment needs to take if the buffer is emptied #define DEFAULT_MINSEGMENTTIME 20000 // (µs) diff --git a/config/examples/Tevo/Nereus/Configuration_adv.h b/config/examples/Tevo/Nereus/Configuration_adv.h index aeb7b8bce3..eafe9489b8 100644 --- a/config/examples/Tevo/Nereus/Configuration_adv.h +++ b/config/examples/Tevo/Nereus/Configuration_adv.h @@ -820,11 +820,14 @@ #define DISABLE_INACTIVE_Z true // Set to false if the nozzle will fall down on your printed part when print has finished. #define DISABLE_INACTIVE_E true -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 +// If the Nozzle or Bed falls when the Z stepper is disabled, set its resting position here. +//#define Z_AFTER_DEACTIVATE Z_HOME_POS //#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated +#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate +#define DEFAULT_MINTRAVELFEEDRATE 0.0 + // Minimum time that a segment needs to take if the buffer is emptied #define DEFAULT_MINSEGMENTTIME 20000 // (µs) diff --git a/config/examples/Tevo/Tarantula Pro/Configuration_adv.h b/config/examples/Tevo/Tarantula Pro/Configuration_adv.h index faa672a28c..0b4d2be718 100644 --- a/config/examples/Tevo/Tarantula Pro/Configuration_adv.h +++ b/config/examples/Tevo/Tarantula Pro/Configuration_adv.h @@ -820,11 +820,14 @@ #define DISABLE_INACTIVE_Z true // Set to false if the nozzle will fall down on your printed part when print has finished. #define DISABLE_INACTIVE_E true -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 +// If the Nozzle or Bed falls when the Z stepper is disabled, set its resting position here. +//#define Z_AFTER_DEACTIVATE Z_HOME_POS //#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated +#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate +#define DEFAULT_MINTRAVELFEEDRATE 0.0 + // Minimum time that a segment needs to take if the buffer is emptied #define DEFAULT_MINSEGMENTTIME 20000 // (µs) diff --git a/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration_adv.h b/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration_adv.h index ed8d192809..1a0a65da8a 100644 --- a/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration_adv.h +++ b/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration_adv.h @@ -820,11 +820,14 @@ #define DISABLE_INACTIVE_Z true // Set to false if the nozzle will fall down on your printed part when print has finished. #define DISABLE_INACTIVE_E true -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 +// If the Nozzle or Bed falls when the Z stepper is disabled, set its resting position here. +//#define Z_AFTER_DEACTIVATE Z_HOME_POS //#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated +#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate +#define DEFAULT_MINTRAVELFEEDRATE 0.0 + // Minimum time that a segment needs to take if the buffer is emptied #define DEFAULT_MINSEGMENTTIME 20000 // (µs) diff --git a/config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration_adv.h b/config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration_adv.h index b1b2f79beb..d2cd8aad36 100644 --- a/config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration_adv.h +++ b/config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration_adv.h @@ -820,11 +820,14 @@ #define DISABLE_INACTIVE_Z true // Set to false if the nozzle will fall down on your printed part when print has finished. #define DISABLE_INACTIVE_E true -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 +// If the Nozzle or Bed falls when the Z stepper is disabled, set its resting position here. +//#define Z_AFTER_DEACTIVATE Z_HOME_POS //#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated +#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate +#define DEFAULT_MINTRAVELFEEDRATE 0.0 + // Minimum time that a segment needs to take if the buffer is emptied #define DEFAULT_MINSEGMENTTIME 20000 // (µs) diff --git a/config/examples/TheBorg/Configuration_adv.h b/config/examples/TheBorg/Configuration_adv.h index 453bc2938d..9aab908b26 100644 --- a/config/examples/TheBorg/Configuration_adv.h +++ b/config/examples/TheBorg/Configuration_adv.h @@ -820,11 +820,14 @@ #define DISABLE_INACTIVE_Z true // Set to false if the nozzle will fall down on your printed part when print has finished. #define DISABLE_INACTIVE_E true -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 +// If the Nozzle or Bed falls when the Z stepper is disabled, set its resting position here. +//#define Z_AFTER_DEACTIVATE Z_HOME_POS //#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated +#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate +#define DEFAULT_MINTRAVELFEEDRATE 0.0 + // Minimum time that a segment needs to take if the buffer is emptied #define DEFAULT_MINSEGMENTTIME 20000 // (µs) diff --git a/config/examples/TinyBoy2/Configuration_adv.h b/config/examples/TinyBoy2/Configuration_adv.h index f5d27315ce..07fe4c6f3e 100644 --- a/config/examples/TinyBoy2/Configuration_adv.h +++ b/config/examples/TinyBoy2/Configuration_adv.h @@ -820,11 +820,14 @@ #define DISABLE_INACTIVE_Z true // Set to false if the nozzle will fall down on your printed part when print has finished. #define DISABLE_INACTIVE_E true -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 +// If the Nozzle or Bed falls when the Z stepper is disabled, set its resting position here. +//#define Z_AFTER_DEACTIVATE Z_HOME_POS //#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated +#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate +#define DEFAULT_MINTRAVELFEEDRATE 0.0 + // Minimum time that a segment needs to take if the buffer is emptied #define DEFAULT_MINSEGMENTTIME 20000 // (µs) diff --git a/config/examples/Tronxy/X3A/Configuration_adv.h b/config/examples/Tronxy/X3A/Configuration_adv.h index eae829d1d0..38615a543d 100644 --- a/config/examples/Tronxy/X3A/Configuration_adv.h +++ b/config/examples/Tronxy/X3A/Configuration_adv.h @@ -820,11 +820,14 @@ #define DISABLE_INACTIVE_Z true // Set to false if the nozzle will fall down on your printed part when print has finished. #define DISABLE_INACTIVE_E true -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 +// If the Nozzle or Bed falls when the Z stepper is disabled, set its resting position here. +//#define Z_AFTER_DEACTIVATE Z_HOME_POS //#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated +#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate +#define DEFAULT_MINTRAVELFEEDRATE 0.0 + // Minimum time that a segment needs to take if the buffer is emptied #define DEFAULT_MINSEGMENTTIME 20000 // (µs) diff --git a/config/examples/Tronxy/X5S-2E/Configuration_adv.h b/config/examples/Tronxy/X5S-2E/Configuration_adv.h index 4782d2c7be..8217bea6bc 100644 --- a/config/examples/Tronxy/X5S-2E/Configuration_adv.h +++ b/config/examples/Tronxy/X5S-2E/Configuration_adv.h @@ -820,11 +820,14 @@ #define DISABLE_INACTIVE_Z true // Set to false if the nozzle will fall down on your printed part when print has finished. #define DISABLE_INACTIVE_E true -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 +// If the Nozzle or Bed falls when the Z stepper is disabled, set its resting position here. +//#define Z_AFTER_DEACTIVATE Z_HOME_POS //#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated +#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate +#define DEFAULT_MINTRAVELFEEDRATE 0.0 + // Minimum time that a segment needs to take if the buffer is emptied #define DEFAULT_MINSEGMENTTIME 20000 // (µs) diff --git a/config/examples/Tronxy/X5SA/Configuration_adv.h b/config/examples/Tronxy/X5SA/Configuration_adv.h index 21c2199788..5b99c7d4d9 100644 --- a/config/examples/Tronxy/X5SA/Configuration_adv.h +++ b/config/examples/Tronxy/X5SA/Configuration_adv.h @@ -820,11 +820,14 @@ #define DISABLE_INACTIVE_Z true // Set to false if the nozzle will fall down on your printed part when print has finished. #define DISABLE_INACTIVE_E true -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 +// If the Nozzle or Bed falls when the Z stepper is disabled, set its resting position here. +//#define Z_AFTER_DEACTIVATE Z_HOME_POS //#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated +#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate +#define DEFAULT_MINTRAVELFEEDRATE 0.0 + // Minimum time that a segment needs to take if the buffer is emptied #define DEFAULT_MINSEGMENTTIME 20000 // (µs) diff --git a/config/examples/UltiMachine/Archim1/Configuration_adv.h b/config/examples/UltiMachine/Archim1/Configuration_adv.h index b400283eb0..3503f8b48a 100644 --- a/config/examples/UltiMachine/Archim1/Configuration_adv.h +++ b/config/examples/UltiMachine/Archim1/Configuration_adv.h @@ -820,11 +820,14 @@ #define DISABLE_INACTIVE_Z true // Set to false if the nozzle will fall down on your printed part when print has finished. #define DISABLE_INACTIVE_E true -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 +// If the Nozzle or Bed falls when the Z stepper is disabled, set its resting position here. +//#define Z_AFTER_DEACTIVATE Z_HOME_POS //#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated +#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate +#define DEFAULT_MINTRAVELFEEDRATE 0.0 + // Minimum time that a segment needs to take if the buffer is emptied #define DEFAULT_MINSEGMENTTIME 20000 // (µs) diff --git a/config/examples/UltiMachine/Archim2/Configuration_adv.h b/config/examples/UltiMachine/Archim2/Configuration_adv.h index 5e41c48fe7..2eaa63d5aa 100644 --- a/config/examples/UltiMachine/Archim2/Configuration_adv.h +++ b/config/examples/UltiMachine/Archim2/Configuration_adv.h @@ -820,11 +820,14 @@ #define DISABLE_INACTIVE_Z true // Set to false if the nozzle will fall down on your printed part when print has finished. #define DISABLE_INACTIVE_E true -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 +// If the Nozzle or Bed falls when the Z stepper is disabled, set its resting position here. +//#define Z_AFTER_DEACTIVATE Z_HOME_POS //#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated +#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate +#define DEFAULT_MINTRAVELFEEDRATE 0.0 + // Minimum time that a segment needs to take if the buffer is emptied #define DEFAULT_MINSEGMENTTIME 20000 // (µs) diff --git a/config/examples/VORONDesign/Configuration_adv.h b/config/examples/VORONDesign/Configuration_adv.h index 01f0059efc..74f11d6442 100644 --- a/config/examples/VORONDesign/Configuration_adv.h +++ b/config/examples/VORONDesign/Configuration_adv.h @@ -820,11 +820,14 @@ #define DISABLE_INACTIVE_Z true // Set to false if the nozzle will fall down on your printed part when print has finished. #define DISABLE_INACTIVE_E true -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 +// If the Nozzle or Bed falls when the Z stepper is disabled, set its resting position here. +//#define Z_AFTER_DEACTIVATE Z_HOME_POS //#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated +#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate +#define DEFAULT_MINTRAVELFEEDRATE 0.0 + // Minimum time that a segment needs to take if the buffer is emptied #define DEFAULT_MINSEGMENTTIME 20000 // (µs) diff --git a/config/examples/Velleman/K8200/Configuration_adv.h b/config/examples/Velleman/K8200/Configuration_adv.h index 0a47c83499..0fa897753c 100644 --- a/config/examples/Velleman/K8200/Configuration_adv.h +++ b/config/examples/Velleman/K8200/Configuration_adv.h @@ -833,11 +833,14 @@ #define DISABLE_INACTIVE_Z true // Set to false if the nozzle will fall down on your printed part when print has finished. #define DISABLE_INACTIVE_E true -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 +// If the Nozzle or Bed falls when the Z stepper is disabled, set its resting position here. +//#define Z_AFTER_DEACTIVATE Z_HOME_POS //#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated +#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate +#define DEFAULT_MINTRAVELFEEDRATE 0.0 + // Minimum time that a segment needs to take if the buffer is emptied #define DEFAULT_MINSEGMENTTIME 20000 // (µs) diff --git a/config/examples/Velleman/K8400/Dual-head/Configuration_adv.h b/config/examples/Velleman/K8400/Dual-head/Configuration_adv.h index 261d12593b..d63ca2f746 100644 --- a/config/examples/Velleman/K8400/Dual-head/Configuration_adv.h +++ b/config/examples/Velleman/K8400/Dual-head/Configuration_adv.h @@ -820,11 +820,14 @@ #define DISABLE_INACTIVE_Z true // Set to false if the nozzle will fall down on your printed part when print has finished. #define DISABLE_INACTIVE_E true -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 +// If the Nozzle or Bed falls when the Z stepper is disabled, set its resting position here. +//#define Z_AFTER_DEACTIVATE Z_HOME_POS //#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated +#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate +#define DEFAULT_MINTRAVELFEEDRATE 0.0 + // Minimum time that a segment needs to take if the buffer is emptied #define DEFAULT_MINSEGMENTTIME 20000 // (µs) diff --git a/config/examples/Velleman/K8400/Single-head/Configuration_adv.h b/config/examples/Velleman/K8400/Single-head/Configuration_adv.h index 470195f4a9..f6d52f3cf8 100644 --- a/config/examples/Velleman/K8400/Single-head/Configuration_adv.h +++ b/config/examples/Velleman/K8400/Single-head/Configuration_adv.h @@ -820,11 +820,14 @@ #define DISABLE_INACTIVE_Z true // Set to false if the nozzle will fall down on your printed part when print has finished. #define DISABLE_INACTIVE_E true -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 +// If the Nozzle or Bed falls when the Z stepper is disabled, set its resting position here. +//#define Z_AFTER_DEACTIVATE Z_HOME_POS //#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated +#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate +#define DEFAULT_MINTRAVELFEEDRATE 0.0 + // Minimum time that a segment needs to take if the buffer is emptied #define DEFAULT_MINSEGMENTTIME 20000 // (µs) diff --git a/config/examples/WASP/PowerWASP/Configuration_adv.h b/config/examples/WASP/PowerWASP/Configuration_adv.h index aa3a68ef81..d039333e03 100644 --- a/config/examples/WASP/PowerWASP/Configuration_adv.h +++ b/config/examples/WASP/PowerWASP/Configuration_adv.h @@ -820,11 +820,14 @@ #define DISABLE_INACTIVE_Z true // Set to false if the nozzle will fall down on your printed part when print has finished. #define DISABLE_INACTIVE_E true -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 +// If the Nozzle or Bed falls when the Z stepper is disabled, set its resting position here. +//#define Z_AFTER_DEACTIVATE Z_HOME_POS //#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated +#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate +#define DEFAULT_MINTRAVELFEEDRATE 0.0 + // Minimum time that a segment needs to take if the buffer is emptied #define DEFAULT_MINSEGMENTTIME 20000 // (µs) diff --git a/config/examples/Wanhao/Duplicator 4S/Configuration_adv.h b/config/examples/Wanhao/Duplicator 4S/Configuration_adv.h index 0eb2f08210..8b1065df5f 100644 --- a/config/examples/Wanhao/Duplicator 4S/Configuration_adv.h +++ b/config/examples/Wanhao/Duplicator 4S/Configuration_adv.h @@ -820,11 +820,14 @@ #define DISABLE_INACTIVE_Z false // Set to false if the nozzle will fall down on your printed part when print has finished. #define DISABLE_INACTIVE_E true -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 +// If the Nozzle or Bed falls when the Z stepper is disabled, set its resting position here. +//#define Z_AFTER_DEACTIVATE Z_HOME_POS //#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated +#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate +#define DEFAULT_MINTRAVELFEEDRATE 0.0 + // Minimum time that a segment needs to take if the buffer is emptied #define DEFAULT_MINSEGMENTTIME 20000 // (µs) diff --git a/config/examples/Wanhao/Duplicator 6/Configuration_adv.h b/config/examples/Wanhao/Duplicator 6/Configuration_adv.h index f7dd804db1..707c34e1b1 100644 --- a/config/examples/Wanhao/Duplicator 6/Configuration_adv.h +++ b/config/examples/Wanhao/Duplicator 6/Configuration_adv.h @@ -820,11 +820,14 @@ #define DISABLE_INACTIVE_Z true // Set to false if the nozzle will fall down on your printed part when print has finished. #define DISABLE_INACTIVE_E true +// If the Nozzle or Bed falls when the Z stepper is disabled, set its resting position here. +//#define Z_AFTER_DEACTIVATE Z_HOME_POS + +#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated + #define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate #define DEFAULT_MINTRAVELFEEDRATE 0.0 -#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated - // Minimum time that a segment needs to take if the buffer is emptied #define DEFAULT_MINSEGMENTTIME 20000 // (µs) diff --git a/config/examples/Wanhao/Duplicator i3 2.1/Configuration_adv.h b/config/examples/Wanhao/Duplicator i3 2.1/Configuration_adv.h index 940a755738..1c2fab8d22 100644 --- a/config/examples/Wanhao/Duplicator i3 2.1/Configuration_adv.h +++ b/config/examples/Wanhao/Duplicator i3 2.1/Configuration_adv.h @@ -820,11 +820,14 @@ #define DISABLE_INACTIVE_Z true // Set to false if the nozzle will fall down on your printed part when print has finished. #define DISABLE_INACTIVE_E true -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 +// If the Nozzle or Bed falls when the Z stepper is disabled, set its resting position here. +//#define Z_AFTER_DEACTIVATE Z_HOME_POS //#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated +#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate +#define DEFAULT_MINTRAVELFEEDRATE 0.0 + // Minimum time that a segment needs to take if the buffer is emptied #define DEFAULT_MINSEGMENTTIME 20000 // (µs) diff --git a/config/examples/Wanhao/Duplicator i3 Mini/Configuration_adv.h b/config/examples/Wanhao/Duplicator i3 Mini/Configuration_adv.h index fa39fe2a1b..e2046a9fb3 100644 --- a/config/examples/Wanhao/Duplicator i3 Mini/Configuration_adv.h +++ b/config/examples/Wanhao/Duplicator i3 Mini/Configuration_adv.h @@ -820,11 +820,14 @@ #define DISABLE_INACTIVE_Z true // Set to false if the nozzle will fall down on your printed part when print has finished. #define DISABLE_INACTIVE_E true -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 +// If the Nozzle or Bed falls when the Z stepper is disabled, set its resting position here. +//#define Z_AFTER_DEACTIVATE Z_HOME_POS //#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated +#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate +#define DEFAULT_MINTRAVELFEEDRATE 0.0 + // Minimum time that a segment needs to take if the buffer is emptied #define DEFAULT_MINSEGMENTTIME 20000 // (µs) diff --git a/config/examples/Weistek/wt150/Configuration_adv.h b/config/examples/Weistek/wt150/Configuration_adv.h index f8c5c76d60..1d08b22211 100644 --- a/config/examples/Weistek/wt150/Configuration_adv.h +++ b/config/examples/Weistek/wt150/Configuration_adv.h @@ -820,11 +820,14 @@ #define DISABLE_INACTIVE_Z true // Set to false if the nozzle will fall down on your printed part when print has finished. #define DISABLE_INACTIVE_E true -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 +// If the Nozzle or Bed falls when the Z stepper is disabled, set its resting position here. +//#define Z_AFTER_DEACTIVATE Z_HOME_POS //#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated +#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate +#define DEFAULT_MINTRAVELFEEDRATE 0.0 + // Minimum time that a segment needs to take if the buffer is emptied #define DEFAULT_MINSEGMENTTIME 20000 // (µs) diff --git a/config/examples/Zonestar/P802M/Configuration_adv.h b/config/examples/Zonestar/P802M/Configuration_adv.h index 8e3f9b205a..fdf475722b 100644 --- a/config/examples/Zonestar/P802M/Configuration_adv.h +++ b/config/examples/Zonestar/P802M/Configuration_adv.h @@ -820,11 +820,14 @@ #define DISABLE_INACTIVE_Z true // Set to false if the nozzle will fall down on your printed part when print has finished. #define DISABLE_INACTIVE_E true -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 +// If the Nozzle or Bed falls when the Z stepper is disabled, set its resting position here. +//#define Z_AFTER_DEACTIVATE Z_HOME_POS //#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated +#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate +#define DEFAULT_MINTRAVELFEEDRATE 0.0 + // Minimum time that a segment needs to take if the buffer is emptied #define DEFAULT_MINSEGMENTTIME 20000 // (µs) diff --git a/config/examples/delta/Anycubic/Kossel Linear Plus/Configuration_adv.h b/config/examples/delta/Anycubic/Kossel Linear Plus/Configuration_adv.h index eb8f55c6e1..4308352335 100644 --- a/config/examples/delta/Anycubic/Kossel Linear Plus/Configuration_adv.h +++ b/config/examples/delta/Anycubic/Kossel Linear Plus/Configuration_adv.h @@ -822,11 +822,14 @@ #define DISABLE_INACTIVE_Z true // Set to false if the nozzle will fall down on your printed part when print has finished. #define DISABLE_INACTIVE_E true +// If the Nozzle or Bed falls when the Z stepper is disabled, set its resting position here. +//#define Z_AFTER_DEACTIVATE Z_HOME_POS + +#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated + #define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate #define DEFAULT_MINTRAVELFEEDRATE 0.0 -#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated - // Minimum time that a segment needs to take if the buffer is emptied #define DEFAULT_MINSEGMENTTIME 20000 // (µs) diff --git a/config/examples/delta/Anycubic/Kossel/Configuration_adv.h b/config/examples/delta/Anycubic/Kossel/Configuration_adv.h index 95cfee7c54..e2d9d91952 100644 --- a/config/examples/delta/Anycubic/Kossel/Configuration_adv.h +++ b/config/examples/delta/Anycubic/Kossel/Configuration_adv.h @@ -821,11 +821,14 @@ #define DISABLE_INACTIVE_Z true // Set to false if the nozzle will fall down on your printed part when print has finished. #define DISABLE_INACTIVE_E true +// If the Nozzle or Bed falls when the Z stepper is disabled, set its resting position here. +//#define Z_AFTER_DEACTIVATE Z_HOME_POS + +#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated + #define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate #define DEFAULT_MINTRAVELFEEDRATE 0.0 -#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated - // Minimum time that a segment needs to take if the buffer is emptied #define DEFAULT_MINSEGMENTTIME 20000 // (µs) diff --git a/config/examples/delta/Anycubic/Predator/Configuration_adv.h b/config/examples/delta/Anycubic/Predator/Configuration_adv.h index 2c1720a10e..947eabaa80 100644 --- a/config/examples/delta/Anycubic/Predator/Configuration_adv.h +++ b/config/examples/delta/Anycubic/Predator/Configuration_adv.h @@ -820,11 +820,14 @@ #define DISABLE_INACTIVE_Z false // Set to false if the nozzle will fall down on your printed part when print has finished. #define DISABLE_INACTIVE_E true -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 +// If the Nozzle or Bed falls when the Z stepper is disabled, set its resting position here. +//#define Z_AFTER_DEACTIVATE Z_HOME_POS //#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated +#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate +#define DEFAULT_MINTRAVELFEEDRATE 0.0 + // Minimum time that a segment needs to take if the buffer is emptied #define DEFAULT_MINSEGMENTTIME 20000 // (µs) diff --git a/config/examples/delta/Dreammaker/Overlord/Configuration_adv.h b/config/examples/delta/Dreammaker/Overlord/Configuration_adv.h index 526e5db2d1..6fb3ee1f6f 100644 --- a/config/examples/delta/Dreammaker/Overlord/Configuration_adv.h +++ b/config/examples/delta/Dreammaker/Overlord/Configuration_adv.h @@ -821,11 +821,14 @@ #define DISABLE_INACTIVE_Z true // Set to false if the nozzle will fall down on your printed part when print has finished. #define DISABLE_INACTIVE_E true -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 +// If the Nozzle or Bed falls when the Z stepper is disabled, set its resting position here. +//#define Z_AFTER_DEACTIVATE Z_HOME_POS //#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated +#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate +#define DEFAULT_MINTRAVELFEEDRATE 0.0 + // Minimum time that a segment needs to take if the buffer is emptied #define DEFAULT_MINSEGMENTTIME 20000 // (µs) diff --git a/config/examples/delta/Dreammaker/Overlord_Pro/Configuration_adv.h b/config/examples/delta/Dreammaker/Overlord_Pro/Configuration_adv.h index 9e1f495b83..9a60a00b76 100644 --- a/config/examples/delta/Dreammaker/Overlord_Pro/Configuration_adv.h +++ b/config/examples/delta/Dreammaker/Overlord_Pro/Configuration_adv.h @@ -821,11 +821,14 @@ #define DISABLE_INACTIVE_Z true // Set to false if the nozzle will fall down on your printed part when print has finished. #define DISABLE_INACTIVE_E true -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 +// If the Nozzle or Bed falls when the Z stepper is disabled, set its resting position here. +//#define Z_AFTER_DEACTIVATE Z_HOME_POS //#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated +#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate +#define DEFAULT_MINTRAVELFEEDRATE 0.0 + // Minimum time that a segment needs to take if the buffer is emptied #define DEFAULT_MINSEGMENTTIME 20000 // (µs) diff --git a/config/examples/delta/FLSUN/QQ-S/Configuration_adv.h b/config/examples/delta/FLSUN/QQ-S/Configuration_adv.h index 2ca1e717fc..5ef48a1ae3 100644 --- a/config/examples/delta/FLSUN/QQ-S/Configuration_adv.h +++ b/config/examples/delta/FLSUN/QQ-S/Configuration_adv.h @@ -821,11 +821,14 @@ #define DISABLE_INACTIVE_Z true // Set to false if the nozzle will fall down on your printed part when print has finished. #define DISABLE_INACTIVE_E true -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 +// If the Nozzle or Bed falls when the Z stepper is disabled, set its resting position here. +//#define Z_AFTER_DEACTIVATE Z_HOME_POS //#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated +#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate +#define DEFAULT_MINTRAVELFEEDRATE 0.0 + // Minimum time that a segment needs to take if the buffer is emptied #define DEFAULT_MINSEGMENTTIME 20000 // (µs) diff --git a/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h b/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h index a838765d7b..8f9beab538 100644 --- a/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h +++ b/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h @@ -821,11 +821,14 @@ #define DISABLE_INACTIVE_Z true // Set to false if the nozzle will fall down on your printed part when print has finished. #define DISABLE_INACTIVE_E true -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 +// If the Nozzle or Bed falls when the Z stepper is disabled, set its resting position here. +//#define Z_AFTER_DEACTIVATE Z_HOME_POS //#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated +#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate +#define DEFAULT_MINTRAVELFEEDRATE 0.0 + // Minimum time that a segment needs to take if the buffer is emptied #define DEFAULT_MINSEGMENTTIME 20000 // (µs) diff --git a/config/examples/delta/FLSUN/kossel/Configuration_adv.h b/config/examples/delta/FLSUN/kossel/Configuration_adv.h index 3b0b871718..be43456a94 100644 --- a/config/examples/delta/FLSUN/kossel/Configuration_adv.h +++ b/config/examples/delta/FLSUN/kossel/Configuration_adv.h @@ -821,11 +821,14 @@ #define DISABLE_INACTIVE_Z true // Set to false if the nozzle will fall down on your printed part when print has finished. #define DISABLE_INACTIVE_E true -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 +// If the Nozzle or Bed falls when the Z stepper is disabled, set its resting position here. +//#define Z_AFTER_DEACTIVATE Z_HOME_POS //#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated +#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate +#define DEFAULT_MINTRAVELFEEDRATE 0.0 + // Minimum time that a segment needs to take if the buffer is emptied #define DEFAULT_MINSEGMENTTIME 20000 // (µs) diff --git a/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h b/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h index 4c1f0e725c..08f167d5bc 100644 --- a/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h +++ b/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h @@ -821,11 +821,14 @@ #define DISABLE_INACTIVE_Z true // Set to false if the nozzle will fall down on your printed part when print has finished. #define DISABLE_INACTIVE_E true -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 +// If the Nozzle or Bed falls when the Z stepper is disabled, set its resting position here. +//#define Z_AFTER_DEACTIVATE Z_HOME_POS //#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated +#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate +#define DEFAULT_MINTRAVELFEEDRATE 0.0 + // Minimum time that a segment needs to take if the buffer is emptied #define DEFAULT_MINSEGMENTTIME 20000 // (µs) diff --git a/config/examples/delta/Geeetech/G2/Configuration_adv.h b/config/examples/delta/Geeetech/G2/Configuration_adv.h index 5331256253..91bfaf31af 100644 --- a/config/examples/delta/Geeetech/G2/Configuration_adv.h +++ b/config/examples/delta/Geeetech/G2/Configuration_adv.h @@ -821,11 +821,14 @@ #define DISABLE_INACTIVE_Z false // Set to false if the nozzle will fall down on your printed part when print has finished. #define DISABLE_INACTIVE_E true -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 +// If the Nozzle or Bed falls when the Z stepper is disabled, set its resting position here. +//#define Z_AFTER_DEACTIVATE Z_HOME_POS //#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated +#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate +#define DEFAULT_MINTRAVELFEEDRATE 0.0 + // Minimum time that a segment needs to take if the buffer is emptied #define DEFAULT_MINSEGMENTTIME 20000 // (µs) diff --git a/config/examples/delta/Geeetech/G2Pro/Configuration_adv.h b/config/examples/delta/Geeetech/G2Pro/Configuration_adv.h index ba710023b3..aff6cbaa9c 100644 --- a/config/examples/delta/Geeetech/G2Pro/Configuration_adv.h +++ b/config/examples/delta/Geeetech/G2Pro/Configuration_adv.h @@ -821,11 +821,14 @@ #define DISABLE_INACTIVE_Z false // Set to false if the nozzle will fall down on your printed part when print has finished. #define DISABLE_INACTIVE_E true -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 +// If the Nozzle or Bed falls when the Z stepper is disabled, set its resting position here. +//#define Z_AFTER_DEACTIVATE Z_HOME_POS //#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated +#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate +#define DEFAULT_MINTRAVELFEEDRATE 0.0 + // Minimum time that a segment needs to take if the buffer is emptied #define DEFAULT_MINSEGMENTTIME 20000 // (µs) diff --git a/config/examples/delta/Geeetech/G2S/Configuration_adv.h b/config/examples/delta/Geeetech/G2S/Configuration_adv.h index a4c37ad3b5..747a6ecb46 100644 --- a/config/examples/delta/Geeetech/G2S/Configuration_adv.h +++ b/config/examples/delta/Geeetech/G2S/Configuration_adv.h @@ -821,11 +821,14 @@ #define DISABLE_INACTIVE_Z false // Set to false if the nozzle will fall down on your printed part when print has finished. #define DISABLE_INACTIVE_E true -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 +// If the Nozzle or Bed falls when the Z stepper is disabled, set its resting position here. +//#define Z_AFTER_DEACTIVATE Z_HOME_POS //#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated +#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate +#define DEFAULT_MINTRAVELFEEDRATE 0.0 + // Minimum time that a segment needs to take if the buffer is emptied #define DEFAULT_MINSEGMENTTIME 20000 // (µs) diff --git a/config/examples/delta/Geeetech/G2SPro/Configuration_adv.h b/config/examples/delta/Geeetech/G2SPro/Configuration_adv.h index 346bd41286..6e00098891 100644 --- a/config/examples/delta/Geeetech/G2SPro/Configuration_adv.h +++ b/config/examples/delta/Geeetech/G2SPro/Configuration_adv.h @@ -821,11 +821,14 @@ #define DISABLE_INACTIVE_Z false // Set to false if the nozzle will fall down on your printed part when print has finished. #define DISABLE_INACTIVE_E true -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 +// If the Nozzle or Bed falls when the Z stepper is disabled, set its resting position here. +//#define Z_AFTER_DEACTIVATE Z_HOME_POS //#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated +#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate +#define DEFAULT_MINTRAVELFEEDRATE 0.0 + // Minimum time that a segment needs to take if the buffer is emptied #define DEFAULT_MINSEGMENTTIME 20000 // (µs) diff --git a/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h b/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h index d0cebced57..048e547371 100644 --- a/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h +++ b/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h @@ -821,11 +821,14 @@ #define DISABLE_INACTIVE_Z true // Set to false if the nozzle will fall down on your printed part when print has finished. #define DISABLE_INACTIVE_E true -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 +// If the Nozzle or Bed falls when the Z stepper is disabled, set its resting position here. +//#define Z_AFTER_DEACTIVATE Z_HOME_POS //#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated +#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate +#define DEFAULT_MINTRAVELFEEDRATE 0.0 + // Minimum time that a segment needs to take if the buffer is emptied #define DEFAULT_MINSEGMENTTIME 20000 // (µs) diff --git a/config/examples/delta/Hatchbox_Alpha/Configuration_adv.h b/config/examples/delta/Hatchbox_Alpha/Configuration_adv.h index d0fb8d24d9..7d70e73942 100644 --- a/config/examples/delta/Hatchbox_Alpha/Configuration_adv.h +++ b/config/examples/delta/Hatchbox_Alpha/Configuration_adv.h @@ -821,11 +821,14 @@ #define DISABLE_INACTIVE_Z true // Set to false if the nozzle will fall down on your printed part when print has finished. #define DISABLE_INACTIVE_E true -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 +// If the Nozzle or Bed falls when the Z stepper is disabled, set its resting position here. +//#define Z_AFTER_DEACTIVATE Z_HOME_POS //#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated +#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate +#define DEFAULT_MINTRAVELFEEDRATE 0.0 + // Minimum time that a segment needs to take if the buffer is emptied #define DEFAULT_MINSEGMENTTIME 20000 // (µs) diff --git a/config/examples/delta/MKS/SBASE/Configuration_adv.h b/config/examples/delta/MKS/SBASE/Configuration_adv.h index b01fd98aae..513167cb8a 100644 --- a/config/examples/delta/MKS/SBASE/Configuration_adv.h +++ b/config/examples/delta/MKS/SBASE/Configuration_adv.h @@ -821,11 +821,14 @@ #define DISABLE_INACTIVE_Z true // Set to false if the nozzle will fall down on your printed part when print has finished. #define DISABLE_INACTIVE_E true -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 +// If the Nozzle or Bed falls when the Z stepper is disabled, set its resting position here. +//#define Z_AFTER_DEACTIVATE Z_HOME_POS //#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated +#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate +#define DEFAULT_MINTRAVELFEEDRATE 0.0 + // Minimum time that a segment needs to take if the buffer is emptied #define DEFAULT_MINSEGMENTTIME 20000 // (µs) diff --git a/config/examples/delta/Malyan M300/Configuration_adv.h b/config/examples/delta/Malyan M300/Configuration_adv.h index 5c375f5bb2..52150fea01 100644 --- a/config/examples/delta/Malyan M300/Configuration_adv.h +++ b/config/examples/delta/Malyan M300/Configuration_adv.h @@ -821,11 +821,14 @@ #define DISABLE_INACTIVE_Z true // Set to false if the nozzle will fall down on your printed part when print has finished. #define DISABLE_INACTIVE_E true -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 +// If the Nozzle or Bed falls when the Z stepper is disabled, set its resting position here. +//#define Z_AFTER_DEACTIVATE Z_HOME_POS //#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated +#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate +#define DEFAULT_MINTRAVELFEEDRATE 0.0 + // Minimum time that a segment needs to take if the buffer is emptied #define DEFAULT_MINSEGMENTTIME 20000 // (µs) diff --git a/config/examples/delta/Tevo Little Monster/Configuration_adv.h b/config/examples/delta/Tevo Little Monster/Configuration_adv.h index 1528c62335..cfc807457d 100644 --- a/config/examples/delta/Tevo Little Monster/Configuration_adv.h +++ b/config/examples/delta/Tevo Little Monster/Configuration_adv.h @@ -821,11 +821,14 @@ #define DISABLE_INACTIVE_Z true // Set to false if the nozzle will fall down on your printed part when print has finished. #define DISABLE_INACTIVE_E true -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 +// If the Nozzle or Bed falls when the Z stepper is disabled, set its resting position here. +//#define Z_AFTER_DEACTIVATE Z_HOME_POS //#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated +#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate +#define DEFAULT_MINTRAVELFEEDRATE 0.0 + // Minimum time that a segment needs to take if the buffer is emptied #define DEFAULT_MINSEGMENTTIME 20000 // (µs) diff --git a/config/examples/delta/generic/Configuration_adv.h b/config/examples/delta/generic/Configuration_adv.h index 1bf53d0c5c..548193f276 100644 --- a/config/examples/delta/generic/Configuration_adv.h +++ b/config/examples/delta/generic/Configuration_adv.h @@ -821,11 +821,14 @@ #define DISABLE_INACTIVE_Z true // Set to false if the nozzle will fall down on your printed part when print has finished. #define DISABLE_INACTIVE_E true -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 +// If the Nozzle or Bed falls when the Z stepper is disabled, set its resting position here. +//#define Z_AFTER_DEACTIVATE Z_HOME_POS //#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated +#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate +#define DEFAULT_MINTRAVELFEEDRATE 0.0 + // Minimum time that a segment needs to take if the buffer is emptied #define DEFAULT_MINSEGMENTTIME 20000 // (µs) diff --git a/config/examples/delta/kossel_clear/Configuration_adv.h b/config/examples/delta/kossel_clear/Configuration_adv.h index 4d845e6096..512556e8c7 100644 --- a/config/examples/delta/kossel_clear/Configuration_adv.h +++ b/config/examples/delta/kossel_clear/Configuration_adv.h @@ -821,11 +821,14 @@ #define DISABLE_INACTIVE_Z false // Set to false if the nozzle will fall down on your printed part when print has finished. #define DISABLE_INACTIVE_E true -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 +// If the Nozzle or Bed falls when the Z stepper is disabled, set its resting position here. +//#define Z_AFTER_DEACTIVATE Z_HOME_POS //#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated +#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate +#define DEFAULT_MINTRAVELFEEDRATE 0.0 + // Minimum time that a segment needs to take if the buffer is emptied #define DEFAULT_MINSEGMENTTIME 20000 // (µs) diff --git a/config/examples/delta/kossel_mini/Configuration_adv.h b/config/examples/delta/kossel_mini/Configuration_adv.h index 24a732d830..849859072e 100644 --- a/config/examples/delta/kossel_mini/Configuration_adv.h +++ b/config/examples/delta/kossel_mini/Configuration_adv.h @@ -821,11 +821,14 @@ #define DISABLE_INACTIVE_Z true // Set to false if the nozzle will fall down on your printed part when print has finished. #define DISABLE_INACTIVE_E true -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 +// If the Nozzle or Bed falls when the Z stepper is disabled, set its resting position here. +//#define Z_AFTER_DEACTIVATE Z_HOME_POS //#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated +#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate +#define DEFAULT_MINTRAVELFEEDRATE 0.0 + // Minimum time that a segment needs to take if the buffer is emptied #define DEFAULT_MINSEGMENTTIME 20000 // (µs) diff --git a/config/examples/delta/kossel_xl/Configuration_adv.h b/config/examples/delta/kossel_xl/Configuration_adv.h index 3fc99b5ea2..98bbfc163b 100644 --- a/config/examples/delta/kossel_xl/Configuration_adv.h +++ b/config/examples/delta/kossel_xl/Configuration_adv.h @@ -821,11 +821,14 @@ #define DISABLE_INACTIVE_Z true // Set to false if the nozzle will fall down on your printed part when print has finished. #define DISABLE_INACTIVE_E true -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 +// If the Nozzle or Bed falls when the Z stepper is disabled, set its resting position here. +//#define Z_AFTER_DEACTIVATE Z_HOME_POS //#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated +#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate +#define DEFAULT_MINTRAVELFEEDRATE 0.0 + // Minimum time that a segment needs to take if the buffer is emptied #define DEFAULT_MINSEGMENTTIME 20000 // (µs) diff --git a/config/examples/gCreate/gMax1.5+/Configuration_adv.h b/config/examples/gCreate/gMax1.5+/Configuration_adv.h index 79ec4c15a0..0bacade45a 100644 --- a/config/examples/gCreate/gMax1.5+/Configuration_adv.h +++ b/config/examples/gCreate/gMax1.5+/Configuration_adv.h @@ -820,11 +820,14 @@ #define DISABLE_INACTIVE_Z true // Set to false if the nozzle will fall down on your printed part when print has finished. #define DISABLE_INACTIVE_E true -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 +// If the Nozzle or Bed falls when the Z stepper is disabled, set its resting position here. +//#define Z_AFTER_DEACTIVATE Z_HOME_POS //#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated +#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate +#define DEFAULT_MINTRAVELFEEDRATE 0.0 + // Minimum time that a segment needs to take if the buffer is emptied #define DEFAULT_MINSEGMENTTIME 20000 // (µs) diff --git a/config/examples/makibox/Configuration_adv.h b/config/examples/makibox/Configuration_adv.h index b453e0a086..ef4b4dde46 100644 --- a/config/examples/makibox/Configuration_adv.h +++ b/config/examples/makibox/Configuration_adv.h @@ -820,11 +820,14 @@ #define DISABLE_INACTIVE_Z true // Set to false if the nozzle will fall down on your printed part when print has finished. #define DISABLE_INACTIVE_E true -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 +// If the Nozzle or Bed falls when the Z stepper is disabled, set its resting position here. +//#define Z_AFTER_DEACTIVATE Z_HOME_POS //#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated +#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate +#define DEFAULT_MINTRAVELFEEDRATE 0.0 + // Minimum time that a segment needs to take if the buffer is emptied #define DEFAULT_MINSEGMENTTIME 20000 // (µs) diff --git a/config/examples/tvrrug/Round2/Configuration_adv.h b/config/examples/tvrrug/Round2/Configuration_adv.h index c0992ea74f..bbee19fb79 100644 --- a/config/examples/tvrrug/Round2/Configuration_adv.h +++ b/config/examples/tvrrug/Round2/Configuration_adv.h @@ -820,11 +820,14 @@ #define DISABLE_INACTIVE_Z true // Set to false if the nozzle will fall down on your printed part when print has finished. #define DISABLE_INACTIVE_E true -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 +// If the Nozzle or Bed falls when the Z stepper is disabled, set its resting position here. +//#define Z_AFTER_DEACTIVATE Z_HOME_POS //#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated +#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate +#define DEFAULT_MINTRAVELFEEDRATE 0.0 + // Minimum time that a segment needs to take if the buffer is emptied #define DEFAULT_MINSEGMENTTIME 20000 // (µs)