✨ NEOPIXEL_M150_DEFAULT

MarlinFirmware/Marlin#23066

config/default/Configuration.h

@@ -3330,6 +3330,7 @@
     #define NEOPIXEL2_PIXELS           15 // Number of LEDs in the second strip
     #define NEOPIXEL2_BRIGHTNESS      127 // Initial brightness (0-255)
     #define NEOPIXEL2_STARTUP_TEST        // Cycle through colors at startup
+    #define NEOPIXEL_M150_DEFAULT      -1 // Default strip for M150 without 'S'. Use -1 to set all by default.
   #else
     //#define NEOPIXEL2_INSERIES          // Default behavior is NeoPixel 2 in parallel
   #endif

config/examples/3DFabXYZ/Migbot/Configuration.h

@@ -3356,6 +3356,7 @@
     #define NEOPIXEL2_PIXELS           15 // Number of LEDs in the second strip
     #define NEOPIXEL2_BRIGHTNESS      127 // Initial brightness (0-255)
     #define NEOPIXEL2_STARTUP_TEST        // Cycle through colors at startup
+    #define NEOPIXEL_M150_DEFAULT      -1 // Default strip for M150 without 'S'. Use -1 to set all by default.
   #else
     //#define NEOPIXEL2_INSERIES          // Default behavior is NeoPixel 2 in parallel
   #endif

config/examples/ADIMLab/Gantry v1/Configuration.h

@@ -3331,6 +3331,7 @@
     #define NEOPIXEL2_PIXELS           15 // Number of LEDs in the second strip
     #define NEOPIXEL2_BRIGHTNESS      127 // Initial brightness (0-255)
     #define NEOPIXEL2_STARTUP_TEST        // Cycle through colors at startup
+    #define NEOPIXEL_M150_DEFAULT      -1 // Default strip for M150 without 'S'. Use -1 to set all by default.
   #else
     //#define NEOPIXEL2_INSERIES          // Default behavior is NeoPixel 2 in parallel
   #endif

config/examples/ADIMLab/Gantry v2/Configuration.h

@@ -3331,6 +3331,7 @@
     #define NEOPIXEL2_PIXELS           15 // Number of LEDs in the second strip
     #define NEOPIXEL2_BRIGHTNESS      127 // Initial brightness (0-255)
     #define NEOPIXEL2_STARTUP_TEST        // Cycle through colors at startup
+    #define NEOPIXEL_M150_DEFAULT      -1 // Default strip for M150 without 'S'. Use -1 to set all by default.
   #else
     //#define NEOPIXEL2_INSERIES          // Default behavior is NeoPixel 2 in parallel
   #endif

config/examples/Alfawise/U20-bltouch/Configuration.h

@@ -3427,6 +3427,7 @@
     #define NEOPIXEL2_PIXELS           15 // Number of LEDs in the second strip
     #define NEOPIXEL2_BRIGHTNESS      127 // Initial brightness (0-255)
     #define NEOPIXEL2_STARTUP_TEST        // Cycle through colors at startup
+    #define NEOPIXEL_M150_DEFAULT      -1 // Default strip for M150 without 'S'. Use -1 to set all by default.
   #else
     //#define NEOPIXEL2_INSERIES          // Default behavior is NeoPixel 2 in parallel
   #endif

config/examples/Alfawise/U20/Configuration.h

@@ -3428,6 +3428,7 @@
     #define NEOPIXEL2_PIXELS           15 // Number of LEDs in the second strip
     #define NEOPIXEL2_BRIGHTNESS      127 // Initial brightness (0-255)
     #define NEOPIXEL2_STARTUP_TEST        // Cycle through colors at startup
+    #define NEOPIXEL_M150_DEFAULT      -1 // Default strip for M150 without 'S'. Use -1 to set all by default.
   #else
     //#define NEOPIXEL2_INSERIES          // Default behavior is NeoPixel 2 in parallel
   #endif

config/examples/AliExpress/CL-260/Configuration.h

@@ -3330,6 +3330,7 @@
     #define NEOPIXEL2_PIXELS           15 // Number of LEDs in the second strip
     #define NEOPIXEL2_BRIGHTNESS      127 // Initial brightness (0-255)
     #define NEOPIXEL2_STARTUP_TEST        // Cycle through colors at startup
+    #define NEOPIXEL_M150_DEFAULT      -1 // Default strip for M150 without 'S'. Use -1 to set all by default.
   #else
     //#define NEOPIXEL2_INSERIES          // Default behavior is NeoPixel 2 in parallel
   #endif

config/examples/AliExpress/UM2pExt/Configuration.h

@@ -3331,6 +3331,7 @@
     #define NEOPIXEL2_PIXELS           15 // Number of LEDs in the second strip
     #define NEOPIXEL2_BRIGHTNESS      127 // Initial brightness (0-255)
     #define NEOPIXEL2_STARTUP_TEST        // Cycle through colors at startup
+    #define NEOPIXEL_M150_DEFAULT      -1 // Default strip for M150 without 'S'. Use -1 to set all by default.
   #else
     //#define NEOPIXEL2_INSERIES          // Default behavior is NeoPixel 2 in parallel
   #endif

config/examples/Anet/A2/Configuration.h

@@ -3332,6 +3332,7 @@
     #define NEOPIXEL2_PIXELS           15 // Number of LEDs in the second strip
     #define NEOPIXEL2_BRIGHTNESS      127 // Initial brightness (0-255)
     #define NEOPIXEL2_STARTUP_TEST        // Cycle through colors at startup
+    #define NEOPIXEL_M150_DEFAULT      -1 // Default strip for M150 without 'S'. Use -1 to set all by default.
   #else
     //#define NEOPIXEL2_INSERIES          // Default behavior is NeoPixel 2 in parallel
   #endif

config/examples/Anet/A2plus/Configuration.h

@@ -3332,6 +3332,7 @@
     #define NEOPIXEL2_PIXELS           15 // Number of LEDs in the second strip
     #define NEOPIXEL2_BRIGHTNESS      127 // Initial brightness (0-255)
     #define NEOPIXEL2_STARTUP_TEST        // Cycle through colors at startup
+    #define NEOPIXEL_M150_DEFAULT      -1 // Default strip for M150 without 'S'. Use -1 to set all by default.
   #else
     //#define NEOPIXEL2_INSERIES          // Default behavior is NeoPixel 2 in parallel
   #endif

config/examples/Anet/A6/Configuration.h

@@ -3424,6 +3424,7 @@
     #define NEOPIXEL2_PIXELS           15 // Number of LEDs in the second strip
     #define NEOPIXEL2_BRIGHTNESS      127 // Initial brightness (0-255)
     #define NEOPIXEL2_STARTUP_TEST        // Cycle through colors at startup
+    #define NEOPIXEL_M150_DEFAULT      -1 // Default strip for M150 without 'S'. Use -1 to set all by default.
   #else
     //#define NEOPIXEL2_INSERIES          // Default behavior is NeoPixel 2 in parallel
   #endif

config/examples/Anet/A8/Configuration.h

@@ -3335,6 +3335,7 @@
     #define NEOPIXEL2_PIXELS           15 // Number of LEDs in the second strip
     #define NEOPIXEL2_BRIGHTNESS      127 // Initial brightness (0-255)
     #define NEOPIXEL2_STARTUP_TEST        // Cycle through colors at startup
+    #define NEOPIXEL_M150_DEFAULT      -1 // Default strip for M150 without 'S'. Use -1 to set all by default.
   #else
     //#define NEOPIXEL2_INSERIES          // Default behavior is NeoPixel 2 in parallel
   #endif

config/examples/Anet/A8plus/Configuration.h

@@ -3335,6 +3335,7 @@
     #define NEOPIXEL2_PIXELS           15 // Number of LEDs in the second strip
     #define NEOPIXEL2_BRIGHTNESS      127 // Initial brightness (0-255)
     #define NEOPIXEL2_STARTUP_TEST        // Cycle through colors at startup
+    #define NEOPIXEL_M150_DEFAULT      -1 // Default strip for M150 without 'S'. Use -1 to set all by default.
   #else
     //#define NEOPIXEL2_INSERIES          // Default behavior is NeoPixel 2 in parallel
   #endif

config/examples/Anet/A9/Configuration.h

@@ -3330,6 +3330,7 @@
     #define NEOPIXEL2_PIXELS           15 // Number of LEDs in the second strip
     #define NEOPIXEL2_BRIGHTNESS      127 // Initial brightness (0-255)
     #define NEOPIXEL2_STARTUP_TEST        // Cycle through colors at startup
+    #define NEOPIXEL_M150_DEFAULT      -1 // Default strip for M150 without 'S'. Use -1 to set all by default.
   #else
     //#define NEOPIXEL2_INSERIES          // Default behavior is NeoPixel 2 in parallel
   #endif

config/examples/Anet/E10/Configuration.h

@@ -3333,6 +3333,7 @@
     #define NEOPIXEL2_PIXELS           15 // Number of LEDs in the second strip
     #define NEOPIXEL2_BRIGHTNESS      127 // Initial brightness (0-255)
     #define NEOPIXEL2_STARTUP_TEST        // Cycle through colors at startup
+    #define NEOPIXEL_M150_DEFAULT      -1 // Default strip for M150 without 'S'. Use -1 to set all by default.
   #else
     //#define NEOPIXEL2_INSERIES          // Default behavior is NeoPixel 2 in parallel
   #endif

config/examples/Anet/E16/BTT SKR 1.3/Configuration.h

@@ -3332,6 +3332,7 @@
     #define NEOPIXEL2_PIXELS           15 // Number of LEDs in the second strip
     #define NEOPIXEL2_BRIGHTNESS      127 // Initial brightness (0-255)
     #define NEOPIXEL2_STARTUP_TEST        // Cycle through colors at startup
+    #define NEOPIXEL_M150_DEFAULT      -1 // Default strip for M150 without 'S'. Use -1 to set all by default.
   #else
     //#define NEOPIXEL2_INSERIES          // Default behavior is NeoPixel 2 in parallel
   #endif

config/examples/Anet/E16/Stock/Configuration.h

@@ -3332,6 +3332,7 @@
     #define NEOPIXEL2_PIXELS           15 // Number of LEDs in the second strip
     #define NEOPIXEL2_BRIGHTNESS      127 // Initial brightness (0-255)
     #define NEOPIXEL2_STARTUP_TEST        // Cycle through colors at startup
+    #define NEOPIXEL_M150_DEFAULT      -1 // Default strip for M150 without 'S'. Use -1 to set all by default.
   #else
     //#define NEOPIXEL2_INSERIES          // Default behavior is NeoPixel 2 in parallel
   #endif

config/examples/Anet/ET4+/Configuration.h

@@ -3369,6 +3369,7 @@
     #define NEOPIXEL2_PIXELS           15 // Number of LEDs in the second strip
     #define NEOPIXEL2_BRIGHTNESS      127 // Initial brightness (0-255)
     #define NEOPIXEL2_STARTUP_TEST        // Cycle through colors at startup
+    #define NEOPIXEL_M150_DEFAULT      -1 // Default strip for M150 without 'S'. Use -1 to set all by default.
   #else
     //#define NEOPIXEL2_INSERIES          // Default behavior is NeoPixel 2 in parallel
   #endif

config/examples/Anet/ET4-Pro/Configuration.h

@@ -3369,6 +3369,7 @@
     #define NEOPIXEL2_PIXELS           15 // Number of LEDs in the second strip
     #define NEOPIXEL2_BRIGHTNESS      127 // Initial brightness (0-255)
     #define NEOPIXEL2_STARTUP_TEST        // Cycle through colors at startup
+    #define NEOPIXEL_M150_DEFAULT      -1 // Default strip for M150 without 'S'. Use -1 to set all by default.
   #else
     //#define NEOPIXEL2_INSERIES          // Default behavior is NeoPixel 2 in parallel
   #endif

config/examples/Anet/ET4/Configuration.h

@@ -3369,6 +3369,7 @@
     #define NEOPIXEL2_PIXELS           15 // Number of LEDs in the second strip
     #define NEOPIXEL2_BRIGHTNESS      127 // Initial brightness (0-255)
     #define NEOPIXEL2_STARTUP_TEST        // Cycle through colors at startup
+    #define NEOPIXEL_M150_DEFAULT      -1 // Default strip for M150 without 'S'. Use -1 to set all by default.
   #else
     //#define NEOPIXEL2_INSERIES          // Default behavior is NeoPixel 2 in parallel
   #endif

config/examples/Anet/ET4X/Configuration.h

@@ -3369,6 +3369,7 @@
     #define NEOPIXEL2_PIXELS           15 // Number of LEDs in the second strip
     #define NEOPIXEL2_BRIGHTNESS      127 // Initial brightness (0-255)
     #define NEOPIXEL2_STARTUP_TEST        // Cycle through colors at startup
+    #define NEOPIXEL_M150_DEFAULT      -1 // Default strip for M150 without 'S'. Use -1 to set all by default.
   #else
     //#define NEOPIXEL2_INSERIES          // Default behavior is NeoPixel 2 in parallel
   #endif

config/examples/Anet/ET5-Pro/Configuration.h

@@ -3364,6 +3364,7 @@
     #define NEOPIXEL2_PIXELS           15 // Number of LEDs in the second strip
     #define NEOPIXEL2_BRIGHTNESS      127 // Initial brightness (0-255)
     #define NEOPIXEL2_STARTUP_TEST        // Cycle through colors at startup
+    #define NEOPIXEL_M150_DEFAULT      -1 // Default strip for M150 without 'S'. Use -1 to set all by default.
   #else
     //#define NEOPIXEL2_INSERIES          // Default behavior is NeoPixel 2 in parallel
   #endif

config/examples/Anet/ET5/Configuration.h

@@ -3364,6 +3364,7 @@
     #define NEOPIXEL2_PIXELS           15 // Number of LEDs in the second strip
     #define NEOPIXEL2_BRIGHTNESS      127 // Initial brightness (0-255)
     #define NEOPIXEL2_STARTUP_TEST        // Cycle through colors at startup
+    #define NEOPIXEL_M150_DEFAULT      -1 // Default strip for M150 without 'S'. Use -1 to set all by default.
   #else
     //#define NEOPIXEL2_INSERIES          // Default behavior is NeoPixel 2 in parallel
   #endif

config/examples/Anet/ET5X/Configuration.h

@@ -3364,6 +3364,7 @@
     #define NEOPIXEL2_PIXELS           15 // Number of LEDs in the second strip
     #define NEOPIXEL2_BRIGHTNESS      127 // Initial brightness (0-255)
     #define NEOPIXEL2_STARTUP_TEST        // Cycle through colors at startup
+    #define NEOPIXEL_M150_DEFAULT      -1 // Default strip for M150 without 'S'. Use -1 to set all by default.
   #else
     //#define NEOPIXEL2_INSERIES          // Default behavior is NeoPixel 2 in parallel
   #endif

config/examples/AnyCubic/Chiron/Configuration.h

@@ -3333,6 +3333,7 @@
     #define NEOPIXEL2_PIXELS           15 // Number of LEDs in the second strip
     #define NEOPIXEL2_BRIGHTNESS      127 // Initial brightness (0-255)
     #define NEOPIXEL2_STARTUP_TEST        // Cycle through colors at startup
+    #define NEOPIXEL_M150_DEFAULT      -1 // Default strip for M150 without 'S'. Use -1 to set all by default.
   #else
     //#define NEOPIXEL2_INSERIES          // Default behavior is NeoPixel 2 in parallel
   #endif

config/examples/AnyCubic/Mega Zero 2.0/Anycubic V1/Configuration.h

@@ -3331,6 +3331,7 @@
     #define NEOPIXEL2_PIXELS           15 // Number of LEDs in the second strip
     #define NEOPIXEL2_BRIGHTNESS      127 // Initial brightness (0-255)
     #define NEOPIXEL2_STARTUP_TEST        // Cycle through colors at startup
+    #define NEOPIXEL_M150_DEFAULT      -1 // Default strip for M150 without 'S'. Use -1 to set all by default.
   #else
     //#define NEOPIXEL2_INSERIES          // Default behavior is NeoPixel 2 in parallel
   #endif

config/examples/AnyCubic/Mega Zero/Anycubic V1/Configuration.h

@@ -3331,6 +3331,7 @@
     #define NEOPIXEL2_PIXELS           15 // Number of LEDs in the second strip
     #define NEOPIXEL2_BRIGHTNESS      127 // Initial brightness (0-255)
     #define NEOPIXEL2_STARTUP_TEST        // Cycle through colors at startup
+    #define NEOPIXEL_M150_DEFAULT      -1 // Default strip for M150 without 'S'. Use -1 to set all by default.
   #else
     //#define NEOPIXEL2_INSERIES          // Default behavior is NeoPixel 2 in parallel
   #endif

config/examples/AnyCubic/Mega Zero/BigTreeTech SKR Mini MZ V1.0/Configuration.h

@@ -3330,6 +3330,7 @@
     #define NEOPIXEL2_PIXELS           15 // Number of LEDs in the second strip
     #define NEOPIXEL2_BRIGHTNESS      127 // Initial brightness (0-255)
     #define NEOPIXEL2_STARTUP_TEST        // Cycle through colors at startup
+    #define NEOPIXEL_M150_DEFAULT      -1 // Default strip for M150 without 'S'. Use -1 to set all by default.
   #else
     //#define NEOPIXEL2_INSERIES          // Default behavior is NeoPixel 2 in parallel
   #endif

config/examples/AnyCubic/i3 Mega/Trigorilla AVR/Configuration.h

@@ -3364,6 +3364,7 @@
     #define NEOPIXEL2_PIXELS           15 // Number of LEDs in the second strip
     #define NEOPIXEL2_BRIGHTNESS      127 // Initial brightness (0-255)
     #define NEOPIXEL2_STARTUP_TEST        // Cycle through colors at startup
+    #define NEOPIXEL_M150_DEFAULT      -1 // Default strip for M150 without 'S'. Use -1 to set all by default.
   #else
     //#define NEOPIXEL2_INSERIES          // Default behavior is NeoPixel 2 in parallel
   #endif

config/examples/AnyCubic/i3 Mega/Trigorilla Pro STM32/Configuration.h

@@ -3348,6 +3348,7 @@
     #define NEOPIXEL2_PIXELS           15 // Number of LEDs in the second strip
     #define NEOPIXEL2_BRIGHTNESS      127 // Initial brightness (0-255)
     #define NEOPIXEL2_STARTUP_TEST        // Cycle through colors at startup
+    #define NEOPIXEL_M150_DEFAULT      -1 // Default strip for M150 without 'S'. Use -1 to set all by default.
   #else
     //#define NEOPIXEL2_INSERIES          // Default behavior is NeoPixel 2 in parallel
   #endif

config/examples/AnyCubic/i3/Configuration.h

@@ -3330,6 +3330,7 @@
     #define NEOPIXEL2_PIXELS           15 // Number of LEDs in the second strip
     #define NEOPIXEL2_BRIGHTNESS      127 // Initial brightness (0-255)
     #define NEOPIXEL2_STARTUP_TEST        // Cycle through colors at startup
+    #define NEOPIXEL_M150_DEFAULT      -1 // Default strip for M150 without 'S'. Use -1 to set all by default.
   #else
     //#define NEOPIXEL2_INSERIES          // Default behavior is NeoPixel 2 in parallel
   #endif

config/examples/ArmEd/Configuration.h

@@ -3331,6 +3331,7 @@
     #define NEOPIXEL2_PIXELS           15 // Number of LEDs in the second strip
     #define NEOPIXEL2_BRIGHTNESS      127 // Initial brightness (0-255)
     #define NEOPIXEL2_STARTUP_TEST        // Cycle through colors at startup
+    #define NEOPIXEL_M150_DEFAULT      -1 // Default strip for M150 without 'S'. Use -1 to set all by default.
   #else
     //#define NEOPIXEL2_INSERIES          // Default behavior is NeoPixel 2 in parallel
   #endif

config/examples/Artillery/Genius Pro/Configuration.h

@@ -3330,6 +3330,7 @@
     #define NEOPIXEL2_PIXELS           15 // Number of LEDs in the second strip
     #define NEOPIXEL2_BRIGHTNESS      127 // Initial brightness (0-255)
     #define NEOPIXEL2_STARTUP_TEST        // Cycle through colors at startup
+    #define NEOPIXEL_M150_DEFAULT      -1 // Default strip for M150 without 'S'. Use -1 to set all by default.
   #else
     //#define NEOPIXEL2_INSERIES          // Default behavior is NeoPixel 2 in parallel
   #endif

config/examples/Artillery/Genius/BLTouch/Configuration.h

@@ -3330,6 +3330,7 @@
     #define NEOPIXEL2_PIXELS           15 // Number of LEDs in the second strip
     #define NEOPIXEL2_BRIGHTNESS      127 // Initial brightness (0-255)
     #define NEOPIXEL2_STARTUP_TEST        // Cycle through colors at startup
+    #define NEOPIXEL_M150_DEFAULT      -1 // Default strip for M150 without 'S'. Use -1 to set all by default.
   #else
     //#define NEOPIXEL2_INSERIES          // Default behavior is NeoPixel 2 in parallel
   #endif

config/examples/Artillery/Genius/V1/Configuration.h

@@ -3330,6 +3330,7 @@
     #define NEOPIXEL2_PIXELS           15 // Number of LEDs in the second strip
     #define NEOPIXEL2_BRIGHTNESS      127 // Initial brightness (0-255)
     #define NEOPIXEL2_STARTUP_TEST        // Cycle through colors at startup
+    #define NEOPIXEL_M150_DEFAULT      -1 // Default strip for M150 without 'S'. Use -1 to set all by default.
   #else
     //#define NEOPIXEL2_INSERIES          // Default behavior is NeoPixel 2 in parallel
   #endif

config/examples/Artillery/Hornet/Configuration.h

@@ -3330,6 +3330,7 @@
     #define NEOPIXEL2_PIXELS           15 // Number of LEDs in the second strip
     #define NEOPIXEL2_BRIGHTNESS      127 // Initial brightness (0-255)
     #define NEOPIXEL2_STARTUP_TEST        // Cycle through colors at startup
+    #define NEOPIXEL_M150_DEFAULT      -1 // Default strip for M150 without 'S'. Use -1 to set all by default.
   #else
     //#define NEOPIXEL2_INSERIES          // Default behavior is NeoPixel 2 in parallel
   #endif

config/examples/Artillery/Sidewinder X1/0.9 BMG - E3D V6/Configuration.h

@@ -3346,6 +3346,7 @@
     #define NEOPIXEL2_PIXELS           15 // Number of LEDs in the second strip
     #define NEOPIXEL2_BRIGHTNESS      127 // Initial brightness (0-255)
     #define NEOPIXEL2_STARTUP_TEST        // Cycle through colors at startup
+    #define NEOPIXEL_M150_DEFAULT      -1 // Default strip for M150 without 'S'. Use -1 to set all by default.
   #else
     //#define NEOPIXEL2_INSERIES          // Default behavior is NeoPixel 2 in parallel
   #endif

config/examples/Artillery/Sidewinder X1/V1/Configuration.h

@@ -3330,6 +3330,7 @@
     #define NEOPIXEL2_PIXELS           15 // Number of LEDs in the second strip
     #define NEOPIXEL2_BRIGHTNESS      127 // Initial brightness (0-255)
     #define NEOPIXEL2_STARTUP_TEST        // Cycle through colors at startup
+    #define NEOPIXEL_M150_DEFAULT      -1 // Default strip for M150 without 'S'. Use -1 to set all by default.
   #else
     //#define NEOPIXEL2_INSERIES          // Default behavior is NeoPixel 2 in parallel
   #endif

config/examples/Artillery/Sidewinder X2/Configuration.h

@@ -3330,6 +3330,7 @@
     #define NEOPIXEL2_PIXELS           15 // Number of LEDs in the second strip
     #define NEOPIXEL2_BRIGHTNESS      127 // Initial brightness (0-255)
     #define NEOPIXEL2_STARTUP_TEST        // Cycle through colors at startup
+    #define NEOPIXEL_M150_DEFAULT      -1 // Default strip for M150 without 'S'. Use -1 to set all by default.
   #else
     //#define NEOPIXEL2_INSERIES          // Default behavior is NeoPixel 2 in parallel
   #endif

config/examples/Azteeg/X5GT/Configuration.h

@@ -3330,6 +3330,7 @@
     #define NEOPIXEL2_PIXELS           15 // Number of LEDs in the second strip
     #define NEOPIXEL2_BRIGHTNESS      127 // Initial brightness (0-255)
     #define NEOPIXEL2_STARTUP_TEST        // Cycle through colors at startup
+    #define NEOPIXEL_M150_DEFAULT      -1 // Default strip for M150 without 'S'. Use -1 to set all by default.
   #else
     //#define NEOPIXEL2_INSERIES          // Default behavior is NeoPixel 2 in parallel
   #endif

config/examples/BIBO/TouchX/cyclops/Configuration.h

@@ -3330,6 +3330,7 @@
     #define NEOPIXEL2_PIXELS           15 // Number of LEDs in the second strip
     #define NEOPIXEL2_BRIGHTNESS      127 // Initial brightness (0-255)
     #define NEOPIXEL2_STARTUP_TEST        // Cycle through colors at startup
+    #define NEOPIXEL_M150_DEFAULT      -1 // Default strip for M150 without 'S'. Use -1 to set all by default.
   #else
     //#define NEOPIXEL2_INSERIES          // Default behavior is NeoPixel 2 in parallel
   #endif

config/examples/BIBO/TouchX/default/Configuration.h

@@ -3328,6 +3328,7 @@
     #define NEOPIXEL2_PIXELS           15 // Number of LEDs in the second strip
     #define NEOPIXEL2_BRIGHTNESS      127 // Initial brightness (0-255)
     #define NEOPIXEL2_STARTUP_TEST        // Cycle through colors at startup
+    #define NEOPIXEL_M150_DEFAULT      -1 // Default strip for M150 without 'S'. Use -1 to set all by default.
   #else
     //#define NEOPIXEL2_INSERIES          // Default behavior is NeoPixel 2 in parallel
   #endif

config/examples/BIQU/B1 - SKR 1.4/Configuration.h

@@ -3352,6 +3352,7 @@
     #define NEOPIXEL2_PIXELS           15 // Number of LEDs in the second strip
     #define NEOPIXEL2_BRIGHTNESS      127 // Initial brightness (0-255)
     #define NEOPIXEL2_STARTUP_TEST        // Cycle through colors at startup
+    #define NEOPIXEL_M150_DEFAULT      -1 // Default strip for M150 without 'S'. Use -1 to set all by default.
   #else
     //#define NEOPIXEL2_INSERIES          // Default behavior is NeoPixel 2 in parallel
   #endif

config/examples/BIQU/B1 - SKR 2/Configuration.h

@@ -3352,6 +3352,7 @@
     #define NEOPIXEL2_PIXELS           15 // Number of LEDs in the second strip
     #define NEOPIXEL2_BRIGHTNESS      127 // Initial brightness (0-255)
     #define NEOPIXEL2_STARTUP_TEST        // Cycle through colors at startup
+    #define NEOPIXEL_M150_DEFAULT      -1 // Default strip for M150 without 'S'. Use -1 to set all by default.
   #else
     //#define NEOPIXEL2_INSERIES          // Default behavior is NeoPixel 2 in parallel
   #endif

config/examples/BIQU/B1 SE Plus/Configuration.h

@@ -3336,6 +3336,7 @@
     #define NEOPIXEL2_PIXELS           15 // Number of LEDs in the second strip
     #define NEOPIXEL2_BRIGHTNESS      127 // Initial brightness (0-255)
     #define NEOPIXEL2_STARTUP_TEST        // Cycle through colors at startup
+    #define NEOPIXEL_M150_DEFAULT      -1 // Default strip for M150 without 'S'. Use -1 to set all by default.
   #else
     //#define NEOPIXEL2_INSERIES          // Default behavior is NeoPixel 2 in parallel
   #endif

config/examples/BIQU/BX/Configuration.h

@@ -3352,6 +3352,7 @@
     #define NEOPIXEL2_PIXELS            2 // Number of LEDs in the second strip
     #define NEOPIXEL2_BRIGHTNESS      127 // Initial brightness (0-255)
     #define NEOPIXEL2_STARTUP_TEST        // Cycle through colors at startup
+    #define NEOPIXEL_M150_DEFAULT      -1 // Default strip for M150 without 'S'. Use -1 to set all by default.
   #else
     //#define NEOPIXEL2_INSERIES          // Default behavior is NeoPixel 2 in parallel
   #endif

config/examples/BIQU/Thunder Standard/Configuration.h

@@ -3330,6 +3330,7 @@
     #define NEOPIXEL2_PIXELS           15 // Number of LEDs in the second strip
     #define NEOPIXEL2_BRIGHTNESS      127 // Initial brightness (0-255)
     #define NEOPIXEL2_STARTUP_TEST        // Cycle through colors at startup
+    #define NEOPIXEL_M150_DEFAULT      -1 // Default strip for M150 without 'S'. Use -1 to set all by default.
   #else
     //#define NEOPIXEL2_INSERIES          // Default behavior is NeoPixel 2 in parallel
   #endif

config/examples/BQ/Hephestos/Configuration.h

@@ -3331,6 +3331,7 @@
     #define NEOPIXEL2_PIXELS           15 // Number of LEDs in the second strip
     #define NEOPIXEL2_BRIGHTNESS      127 // Initial brightness (0-255)
     #define NEOPIXEL2_STARTUP_TEST        // Cycle through colors at startup
+    #define NEOPIXEL_M150_DEFAULT      -1 // Default strip for M150 without 'S'. Use -1 to set all by default.
   #else
     //#define NEOPIXEL2_INSERIES          // Default behavior is NeoPixel 2 in parallel
   #endif

config/examples/BQ/Hephestos_2/Configuration.h

@@ -3344,6 +3344,7 @@
     #define NEOPIXEL2_PIXELS           15 // Number of LEDs in the second strip
     #define NEOPIXEL2_BRIGHTNESS      127 // Initial brightness (0-255)
     #define NEOPIXEL2_STARTUP_TEST        // Cycle through colors at startup
+    #define NEOPIXEL_M150_DEFAULT      -1 // Default strip for M150 without 'S'. Use -1 to set all by default.
   #else
     //#define NEOPIXEL2_INSERIES          // Default behavior is NeoPixel 2 in parallel
   #endif

config/examples/BQ/WITBOX/Configuration.h

@@ -3331,6 +3331,7 @@
     #define NEOPIXEL2_PIXELS           15 // Number of LEDs in the second strip
     #define NEOPIXEL2_BRIGHTNESS      127 // Initial brightness (0-255)
     #define NEOPIXEL2_STARTUP_TEST        // Cycle through colors at startup
+    #define NEOPIXEL_M150_DEFAULT      -1 // Default strip for M150 without 'S'. Use -1 to set all by default.
   #else
     //#define NEOPIXEL2_INSERIES          // Default behavior is NeoPixel 2 in parallel
   #endif

config/examples/CTC/A13/Configuration.h

@@ -3332,6 +3332,7 @@
     #define NEOPIXEL2_PIXELS           15 // Number of LEDs in the second strip
     #define NEOPIXEL2_BRIGHTNESS      127 // Initial brightness (0-255)
     #define NEOPIXEL2_STARTUP_TEST        // Cycle through colors at startup
+    #define NEOPIXEL_M150_DEFAULT      -1 // Default strip for M150 without 'S'. Use -1 to set all by default.
   #else
     //#define NEOPIXEL2_INSERIES          // Default behavior is NeoPixel 2 in parallel
   #endif

config/examples/CTC/Bizer/Configuration.h

@@ -3336,6 +3336,7 @@
     #define NEOPIXEL2_PIXELS           15 // Number of LEDs in the second strip
     #define NEOPIXEL2_BRIGHTNESS      127 // Initial brightness (0-255)
     #define NEOPIXEL2_STARTUP_TEST        // Cycle through colors at startup
+    #define NEOPIXEL_M150_DEFAULT      -1 // Default strip for M150 without 'S'. Use -1 to set all by default.
   #else
     //#define NEOPIXEL2_INSERIES          // Default behavior is NeoPixel 2 in parallel
   #endif

config/examples/CTC/i3 2560 Rev A/no probe/Configuration.h

@@ -3331,6 +3331,7 @@
     #define NEOPIXEL2_PIXELS           15 // Number of LEDs in the second strip
     #define NEOPIXEL2_BRIGHTNESS      127 // Initial brightness (0-255)
     #define NEOPIXEL2_STARTUP_TEST        // Cycle through colors at startup
+    #define NEOPIXEL_M150_DEFAULT      -1 // Default strip for M150 without 'S'. Use -1 to set all by default.
   #else
     //#define NEOPIXEL2_INSERIES          // Default behavior is NeoPixel 2 in parallel
   #endif

config/examples/Cartesio/Configuration.h

@@ -3346,6 +3346,7 @@
     #define NEOPIXEL2_PIXELS           15 // Number of LEDs in the second strip
     #define NEOPIXEL2_BRIGHTNESS      127 // Initial brightness (0-255)
     #define NEOPIXEL2_STARTUP_TEST        // Cycle through colors at startup
+    #define NEOPIXEL_M150_DEFAULT      -1 // Default strip for M150 without 'S'. Use -1 to set all by default.
   #else
     //#define NEOPIXEL2_INSERIES          // Default behavior is NeoPixel 2 in parallel
   #endif

config/examples/Copymaster3D/300/Configuration.h

@@ -3331,6 +3331,7 @@
     #define NEOPIXEL2_PIXELS           15 // Number of LEDs in the second strip
     #define NEOPIXEL2_BRIGHTNESS      127 // Initial brightness (0-255)
     #define NEOPIXEL2_STARTUP_TEST        // Cycle through colors at startup
+    #define NEOPIXEL_M150_DEFAULT      -1 // Default strip for M150 without 'S'. Use -1 to set all by default.
   #else
     //#define NEOPIXEL2_INSERIES          // Default behavior is NeoPixel 2 in parallel
   #endif

config/examples/Copymaster3D/400/Configuration.h

@@ -3330,6 +3330,7 @@
     #define NEOPIXEL2_PIXELS           15 // Number of LEDs in the second strip
     #define NEOPIXEL2_BRIGHTNESS      127 // Initial brightness (0-255)
     #define NEOPIXEL2_STARTUP_TEST        // Cycle through colors at startup
+    #define NEOPIXEL_M150_DEFAULT      -1 // Default strip for M150 without 'S'. Use -1 to set all by default.
   #else
     //#define NEOPIXEL2_INSERIES          // Default behavior is NeoPixel 2 in parallel
   #endif

config/examples/Copymaster3D/500/Configuration.h

@@ -3331,6 +3331,7 @@
     #define NEOPIXEL2_PIXELS           15 // Number of LEDs in the second strip
     #define NEOPIXEL2_BRIGHTNESS      127 // Initial brightness (0-255)
     #define NEOPIXEL2_STARTUP_TEST        // Cycle through colors at startup
+    #define NEOPIXEL_M150_DEFAULT      -1 // Default strip for M150 without 'S'. Use -1 to set all by default.
   #else
     //#define NEOPIXEL2_INSERIES          // Default behavior is NeoPixel 2 in parallel
   #endif

config/examples/Creality/CR-10 Mini/BigTreeTech SKR Mini E3 2.0/Configuration.h

@@ -3339,6 +3339,7 @@
     #define NEOPIXEL2_PIXELS           15 // Number of LEDs in the second strip
     #define NEOPIXEL2_BRIGHTNESS      127 // Initial brightness (0-255)
     #define NEOPIXEL2_STARTUP_TEST        // Cycle through colors at startup
+    #define NEOPIXEL_M150_DEFAULT      -1 // Default strip for M150 without 'S'. Use -1 to set all by default.
   #else
     //#define NEOPIXEL2_INSERIES          // Default behavior is NeoPixel 2 in parallel
   #endif

config/examples/Creality/CR-10 Mini/CrealityV1/Configuration.h

@@ -3339,6 +3339,7 @@
     #define NEOPIXEL2_PIXELS           15 // Number of LEDs in the second strip
     #define NEOPIXEL2_BRIGHTNESS      127 // Initial brightness (0-255)
     #define NEOPIXEL2_STARTUP_TEST        // Cycle through colors at startup
+    #define NEOPIXEL_M150_DEFAULT      -1 // Default strip for M150 without 'S'. Use -1 to set all by default.
   #else
     //#define NEOPIXEL2_INSERIES          // Default behavior is NeoPixel 2 in parallel
   #endif

config/examples/Creality/CR-10 Mini/MEEB-3DP/Configuration.h

@@ -3330,6 +3330,7 @@
     #define NEOPIXEL2_PIXELS           15 // Number of LEDs in the second strip
     #define NEOPIXEL2_BRIGHTNESS      127 // Initial brightness (0-255)
     #define NEOPIXEL2_STARTUP_TEST        // Cycle through colors at startup
+    #define NEOPIXEL_M150_DEFAULT      -1 // Default strip for M150 without 'S'. Use -1 to set all by default.
   #else
     //#define NEOPIXEL2_INSERIES          // Default behavior is NeoPixel 2 in parallel
   #endif

config/examples/Creality/CR-10 S4/CrealityV1/Configuration.h

@@ -3345,6 +3345,7 @@
     #define NEOPIXEL2_PIXELS           15 // Number of LEDs in the second strip
     #define NEOPIXEL2_BRIGHTNESS      127 // Initial brightness (0-255)
     #define NEOPIXEL2_STARTUP_TEST        // Cycle through colors at startup
+    #define NEOPIXEL_M150_DEFAULT      -1 // Default strip for M150 without 'S'. Use -1 to set all by default.
   #else
     //#define NEOPIXEL2_INSERIES          // Default behavior is NeoPixel 2 in parallel
   #endif

config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 1.2 with TFT35 E3 V3.0/Configuration.h

@@ -3333,6 +3333,7 @@
     #define NEOPIXEL2_PIXELS           15 // Number of LEDs in the second strip
     #define NEOPIXEL2_BRIGHTNESS      127 // Initial brightness (0-255)
     #define NEOPIXEL2_STARTUP_TEST        // Cycle through colors at startup
+    #define NEOPIXEL_M150_DEFAULT      -1 // Default strip for M150 without 'S'. Use -1 to set all by default.
   #else
     //#define NEOPIXEL2_INSERIES          // Default behavior is NeoPixel 2 in parallel
   #endif

config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 v3/Configuration.h

@@ -3345,6 +3345,7 @@
     #define NEOPIXEL2_PIXELS           15 // Number of LEDs in the second strip
     #define NEOPIXEL2_BRIGHTNESS      127 // Initial brightness (0-255)
     #define NEOPIXEL2_STARTUP_TEST        // Cycle through colors at startup
+    #define NEOPIXEL_M150_DEFAULT      -1 // Default strip for M150 without 'S'. Use -1 to set all by default.
   #else
     //#define NEOPIXEL2_INSERIES          // Default behavior is NeoPixel 2 in parallel
   #endif

config/examples/Creality/CR-10 S5/CrealityV1/Configuration.h

@@ -3333,6 +3333,7 @@
     #define NEOPIXEL2_PIXELS           15 // Number of LEDs in the second strip
     #define NEOPIXEL2_BRIGHTNESS      127 // Initial brightness (0-255)
     #define NEOPIXEL2_STARTUP_TEST        // Cycle through colors at startup
+    #define NEOPIXEL_M150_DEFAULT      -1 // Default strip for M150 without 'S'. Use -1 to set all by default.
   #else
     //#define NEOPIXEL2_INSERIES          // Default behavior is NeoPixel 2 in parallel
   #endif

config/examples/Creality/CR-10 S5/CrealityV2.2-BLTouch/Configuration.h

@@ -3334,6 +3334,7 @@
     #define NEOPIXEL2_PIXELS           15 // Number of LEDs in the second strip
     #define NEOPIXEL2_BRIGHTNESS      127 // Initial brightness (0-255)
     #define NEOPIXEL2_STARTUP_TEST        // Cycle through colors at startup
+    #define NEOPIXEL_M150_DEFAULT      -1 // Default strip for M150 without 'S'. Use -1 to set all by default.
   #else
     //#define NEOPIXEL2_INSERIES          // Default behavior is NeoPixel 2 in parallel
   #endif

config/examples/Creality/CR-10 V2/Configuration.h

@@ -3359,6 +3359,7 @@
     #define NEOPIXEL2_PIXELS           15 // Number of LEDs in the second strip
     #define NEOPIXEL2_BRIGHTNESS      127 // Initial brightness (0-255)
     #define NEOPIXEL2_STARTUP_TEST        // Cycle through colors at startup
+    #define NEOPIXEL_M150_DEFAULT      -1 // Default strip for M150 without 'S'. Use -1 to set all by default.
   #else
     //#define NEOPIXEL2_INSERIES          // Default behavior is NeoPixel 2 in parallel
   #endif

config/examples/Creality/CR-10 V3/Configuration.h

@@ -3364,6 +3364,7 @@
     #define NEOPIXEL2_PIXELS           15 // Number of LEDs in the second strip
     #define NEOPIXEL2_BRIGHTNESS      127 // Initial brightness (0-255)
     #define NEOPIXEL2_STARTUP_TEST        // Cycle through colors at startup
+    #define NEOPIXEL_M150_DEFAULT      -1 // Default strip for M150 without 'S'. Use -1 to set all by default.
   #else
     //#define NEOPIXEL2_INSERIES          // Default behavior is NeoPixel 2 in parallel
   #endif

config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 2.0/Configuration.h

@@ -3341,6 +3341,7 @@
     #define NEOPIXEL2_PIXELS           15 // Number of LEDs in the second strip
     #define NEOPIXEL2_BRIGHTNESS      127 // Initial brightness (0-255)
     #define NEOPIXEL2_STARTUP_TEST        // Cycle through colors at startup
+    #define NEOPIXEL_M150_DEFAULT      -1 // Default strip for M150 without 'S'. Use -1 to set all by default.
   #else
     //#define NEOPIXEL2_INSERIES          // Default behavior is NeoPixel 2 in parallel
   #endif

config/examples/Creality/CR-10/CrealityV1/Configuration.h

@@ -3330,6 +3330,7 @@
     #define NEOPIXEL2_PIXELS           15 // Number of LEDs in the second strip
     #define NEOPIXEL2_BRIGHTNESS      127 // Initial brightness (0-255)
     #define NEOPIXEL2_STARTUP_TEST        // Cycle through colors at startup
+    #define NEOPIXEL_M150_DEFAULT      -1 // Default strip for M150 without 'S'. Use -1 to set all by default.
   #else
     //#define NEOPIXEL2_INSERIES          // Default behavior is NeoPixel 2 in parallel
   #endif

config/examples/Creality/CR-10S/BigTreeTech SKR 1.4 Turbo TMC2209/Configuration.h

@@ -3342,6 +3342,7 @@
     #define NEOPIXEL2_PIXELS           15 // Number of LEDs in the second strip
     #define NEOPIXEL2_BRIGHTNESS      127 // Initial brightness (0-255)
     #define NEOPIXEL2_STARTUP_TEST        // Cycle through colors at startup
+    #define NEOPIXEL_M150_DEFAULT      -1 // Default strip for M150 without 'S'. Use -1 to set all by default.
   #else
     //#define NEOPIXEL2_INSERIES          // Default behavior is NeoPixel 2 in parallel
   #endif

config/examples/Creality/CR-10S/BigTreeTech SKR 2.0 TMC2209/Configuration.h

@@ -3342,6 +3342,7 @@
     #define NEOPIXEL2_PIXELS           15 // Number of LEDs in the second strip
     #define NEOPIXEL2_BRIGHTNESS      127 // Initial brightness (0-255)
     #define NEOPIXEL2_STARTUP_TEST        // Cycle through colors at startup
+    #define NEOPIXEL_M150_DEFAULT      -1 // Default strip for M150 without 'S'. Use -1 to set all by default.
   #else
     //#define NEOPIXEL2_INSERIES          // Default behavior is NeoPixel 2 in parallel
   #endif

config/examples/Creality/CR-10S/BigTreeTech SKR Mini E3 2.0/Configuration.h

@@ -3343,6 +3343,7 @@
     #define NEOPIXEL2_PIXELS           15 // Number of LEDs in the second strip
     #define NEOPIXEL2_BRIGHTNESS      127 // Initial brightness (0-255)
     #define NEOPIXEL2_STARTUP_TEST        // Cycle through colors at startup
+    #define NEOPIXEL_M150_DEFAULT      -1 // Default strip for M150 without 'S'. Use -1 to set all by default.
   #else
     //#define NEOPIXEL2_INSERIES          // Default behavior is NeoPixel 2 in parallel
   #endif

config/examples/Creality/CR-10S/BigTreeTech SKR Pro v1.2/Configuration.h

@@ -3330,6 +3330,7 @@
     #define NEOPIXEL2_PIXELS           15 // Number of LEDs in the second strip
     #define NEOPIXEL2_BRIGHTNESS      127 // Initial brightness (0-255)
     #define NEOPIXEL2_STARTUP_TEST        // Cycle through colors at startup
+    #define NEOPIXEL_M150_DEFAULT      -1 // Default strip for M150 without 'S'. Use -1 to set all by default.
   #else
     //#define NEOPIXEL2_INSERIES          // Default behavior is NeoPixel 2 in parallel
   #endif

config/examples/Creality/CR-10S/CrealityV1/Configuration.h

@@ -3331,6 +3331,7 @@
     #define NEOPIXEL2_PIXELS           15 // Number of LEDs in the second strip
     #define NEOPIXEL2_BRIGHTNESS      127 // Initial brightness (0-255)
     #define NEOPIXEL2_STARTUP_TEST        // Cycle through colors at startup
+    #define NEOPIXEL_M150_DEFAULT      -1 // Default strip for M150 without 'S'. Use -1 to set all by default.
   #else
     //#define NEOPIXEL2_INSERIES          // Default behavior is NeoPixel 2 in parallel
   #endif

config/examples/Creality/CR-20 Pro/Configuration.h

@@ -3336,6 +3336,7 @@
     #define NEOPIXEL2_PIXELS           15 // Number of LEDs in the second strip
     #define NEOPIXEL2_BRIGHTNESS      127 // Initial brightness (0-255)
     #define NEOPIXEL2_STARTUP_TEST        // Cycle through colors at startup
+    #define NEOPIXEL_M150_DEFAULT      -1 // Default strip for M150 without 'S'. Use -1 to set all by default.
   #else
     //#define NEOPIXEL2_INSERIES          // Default behavior is NeoPixel 2 in parallel
   #endif

config/examples/Creality/CR-20/RepRapWorld Minitronics20/Configuration.h

@@ -3331,6 +3331,7 @@
     #define NEOPIXEL2_PIXELS           15 // Number of LEDs in the second strip
     #define NEOPIXEL2_BRIGHTNESS      127 // Initial brightness (0-255)
     #define NEOPIXEL2_STARTUP_TEST        // Cycle through colors at startup
+    #define NEOPIXEL_M150_DEFAULT      -1 // Default strip for M150 without 'S'. Use -1 to set all by default.
   #else
     //#define NEOPIXEL2_INSERIES          // Default behavior is NeoPixel 2 in parallel
   #endif

config/examples/Creality/CR-20/Stock/Configuration.h

@@ -3336,6 +3336,7 @@
     #define NEOPIXEL2_PIXELS           15 // Number of LEDs in the second strip
     #define NEOPIXEL2_BRIGHTNESS      127 // Initial brightness (0-255)
     #define NEOPIXEL2_STARTUP_TEST        // Cycle through colors at startup
+    #define NEOPIXEL_M150_DEFAULT      -1 // Default strip for M150 without 'S'. Use -1 to set all by default.
   #else
     //#define NEOPIXEL2_INSERIES          // Default behavior is NeoPixel 2 in parallel
   #endif

config/examples/Creality/CR-30 PrintMill/Configuration.h

@@ -3335,6 +3335,7 @@
     #define NEOPIXEL2_PIXELS           15 // Number of LEDs in the second strip
     #define NEOPIXEL2_BRIGHTNESS      127 // Initial brightness (0-255)
     #define NEOPIXEL2_STARTUP_TEST        // Cycle through colors at startup
+    #define NEOPIXEL_M150_DEFAULT      -1 // Default strip for M150 without 'S'. Use -1 to set all by default.
   #else
     //#define NEOPIXEL2_INSERIES          // Default behavior is NeoPixel 2 in parallel
   #endif

config/examples/Creality/CR-6 SE/Configuration.h

@@ -3331,6 +3331,7 @@
     #define NEOPIXEL2_PIXELS           15 // Number of LEDs in the second strip
     #define NEOPIXEL2_BRIGHTNESS      127 // Initial brightness (0-255)
     #define NEOPIXEL2_STARTUP_TEST        // Cycle through colors at startup
+    #define NEOPIXEL_M150_DEFAULT      -1 // Default strip for M150 without 'S'. Use -1 to set all by default.
   #else
     //#define NEOPIXEL2_INSERIES          // Default behavior is NeoPixel 2 in parallel
   #endif

config/examples/Creality/CR-8/Configuration.h

@@ -3330,6 +3330,7 @@
     #define NEOPIXEL2_PIXELS           15 // Number of LEDs in the second strip
     #define NEOPIXEL2_BRIGHTNESS      127 // Initial brightness (0-255)
     #define NEOPIXEL2_STARTUP_TEST        // Cycle through colors at startup
+    #define NEOPIXEL_M150_DEFAULT      -1 // Default strip for M150 without 'S'. Use -1 to set all by default.
   #else
     //#define NEOPIXEL2_INSERIES          // Default behavior is NeoPixel 2 in parallel
   #endif

config/examples/Creality/Ender-2 Pro/CrealityV423/Configuration.h

@@ -3333,6 +3333,7 @@
     #define NEOPIXEL2_PIXELS           15 // Number of LEDs in the second strip
     #define NEOPIXEL2_BRIGHTNESS      127 // Initial brightness (0-255)
     #define NEOPIXEL2_STARTUP_TEST        // Cycle through colors at startup
+    #define NEOPIXEL_M150_DEFAULT      -1 // Default strip for M150 without 'S'. Use -1 to set all by default.
   #else
     //#define NEOPIXEL2_INSERIES          // Default behavior is NeoPixel 2 in parallel
   #endif

config/examples/Creality/Ender-2/Configuration.h

@@ -3331,6 +3331,7 @@
     #define NEOPIXEL2_PIXELS           15 // Number of LEDs in the second strip
     #define NEOPIXEL2_BRIGHTNESS      127 // Initial brightness (0-255)
     #define NEOPIXEL2_STARTUP_TEST        // Cycle through colors at startup
+    #define NEOPIXEL_M150_DEFAULT      -1 // Default strip for M150 without 'S'. Use -1 to set all by default.
   #else
     //#define NEOPIXEL2_INSERIES          // Default behavior is NeoPixel 2 in parallel
   #endif

config/examples/Creality/Ender-3 Max/Configuration.h

@@ -3338,6 +3338,7 @@
     #define NEOPIXEL2_PIXELS           15 // Number of LEDs in the second strip
     #define NEOPIXEL2_BRIGHTNESS      127 // Initial brightness (0-255)
     #define NEOPIXEL2_STARTUP_TEST        // Cycle through colors at startup
+    #define NEOPIXEL_M150_DEFAULT      -1 // Default strip for M150 without 'S'. Use -1 to set all by default.
   #else
     //#define NEOPIXEL2_INSERIES          // Default behavior is NeoPixel 2 in parallel
   #endif

config/examples/Creality/Ender-3 Pro/BigTreeTech SKR 1.4 Turbo/Configuration.h

@@ -3330,6 +3330,7 @@
     #define NEOPIXEL2_PIXELS           15 // Number of LEDs in the second strip
     #define NEOPIXEL2_BRIGHTNESS      127 // Initial brightness (0-255)
     #define NEOPIXEL2_STARTUP_TEST        // Cycle through colors at startup
+    #define NEOPIXEL_M150_DEFAULT      -1 // Default strip for M150 without 'S'. Use -1 to set all by default.
   #else
     //#define NEOPIXEL2_INSERIES          // Default behavior is NeoPixel 2 in parallel
   #endif

config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.0/Configuration.h

@@ -3330,6 +3330,7 @@
     #define NEOPIXEL2_PIXELS           15 // Number of LEDs in the second strip
     #define NEOPIXEL2_BRIGHTNESS      127 // Initial brightness (0-255)
     #define NEOPIXEL2_STARTUP_TEST        // Cycle through colors at startup
+    #define NEOPIXEL_M150_DEFAULT      -1 // Default strip for M150 without 'S'. Use -1 to set all by default.
   #else
     //#define NEOPIXEL2_INSERIES          // Default behavior is NeoPixel 2 in parallel
   #endif

config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.2/Configuration.h

@@ -3330,6 +3330,7 @@
     #define NEOPIXEL2_PIXELS           15 // Number of LEDs in the second strip
     #define NEOPIXEL2_BRIGHTNESS      127 // Initial brightness (0-255)
     #define NEOPIXEL2_STARTUP_TEST        // Cycle through colors at startup
+    #define NEOPIXEL_M150_DEFAULT      -1 // Default strip for M150 without 'S'. Use -1 to set all by default.
   #else
     //#define NEOPIXEL2_INSERIES          // Default behavior is NeoPixel 2 in parallel
   #endif

config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 2.0/Configuration.h

@@ -3330,6 +3330,7 @@
     #define NEOPIXEL2_PIXELS           15 // Number of LEDs in the second strip
     #define NEOPIXEL2_BRIGHTNESS      127 // Initial brightness (0-255)
     #define NEOPIXEL2_STARTUP_TEST        // Cycle through colors at startup
+    #define NEOPIXEL_M150_DEFAULT      -1 // Default strip for M150 without 'S'. Use -1 to set all by default.
   #else
     //#define NEOPIXEL2_INSERIES          // Default behavior is NeoPixel 2 in parallel
   #endif

config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 3.0/Configuration.h

@@ -3330,6 +3330,7 @@
     #define NEOPIXEL2_PIXELS           15 // Number of LEDs in the second strip
     #define NEOPIXEL2_BRIGHTNESS      127 // Initial brightness (0-255)
     #define NEOPIXEL2_STARTUP_TEST        // Cycle through colors at startup
+    #define NEOPIXEL_M150_DEFAULT      -1 // Default strip for M150 without 'S'. Use -1 to set all by default.
   #else
     //#define NEOPIXEL2_INSERIES          // Default behavior is NeoPixel 2 in parallel
   #endif

config/examples/Creality/Ender-3 Pro/CrealityV1/Configuration.h

@@ -3331,6 +3331,7 @@
     #define NEOPIXEL2_PIXELS           15 // Number of LEDs in the second strip
     #define NEOPIXEL2_BRIGHTNESS      127 // Initial brightness (0-255)
     #define NEOPIXEL2_STARTUP_TEST        // Cycle through colors at startup
+    #define NEOPIXEL_M150_DEFAULT      -1 // Default strip for M150 without 'S'. Use -1 to set all by default.
   #else
     //#define NEOPIXEL2_INSERIES          // Default behavior is NeoPixel 2 in parallel
   #endif

config/examples/Creality/Ender-3 Pro/CrealityV422/Configuration.h

@@ -3334,6 +3334,7 @@
     #define NEOPIXEL2_PIXELS           15 // Number of LEDs in the second strip
     #define NEOPIXEL2_BRIGHTNESS      127 // Initial brightness (0-255)
     #define NEOPIXEL2_STARTUP_TEST        // Cycle through colors at startup
+    #define NEOPIXEL_M150_DEFAULT      -1 // Default strip for M150 without 'S'. Use -1 to set all by default.
   #else
     //#define NEOPIXEL2_INSERIES          // Default behavior is NeoPixel 2 in parallel
   #endif

config/examples/Creality/Ender-3 Pro/CrealityV427/Configuration.h

@@ -3334,6 +3334,7 @@
     #define NEOPIXEL2_PIXELS           15 // Number of LEDs in the second strip
     #define NEOPIXEL2_BRIGHTNESS      127 // Initial brightness (0-255)
     #define NEOPIXEL2_STARTUP_TEST        // Cycle through colors at startup
+    #define NEOPIXEL_M150_DEFAULT      -1 // Default strip for M150 without 'S'. Use -1 to set all by default.
   #else
     //#define NEOPIXEL2_INSERIES          // Default behavior is NeoPixel 2 in parallel
   #endif

config/examples/Creality/Ender-3 S1/STM32F1/Configuration.h

@@ -3336,6 +3336,7 @@
     #define NEOPIXEL2_PIXELS           15 // Number of LEDs in the second strip
     #define NEOPIXEL2_BRIGHTNESS      127 // Initial brightness (0-255)
     #define NEOPIXEL2_STARTUP_TEST        // Cycle through colors at startup
+    #define NEOPIXEL_M150_DEFAULT      -1 // Default strip for M150 without 'S'. Use -1 to set all by default.
   #else
     //#define NEOPIXEL2_INSERIES          // Default behavior is NeoPixel 2 in parallel
   #endif

config/examples/Creality/Ender-3 S1/STM32F4/Configuration.h

@@ -3343,6 +3343,7 @@
     #define NEOPIXEL2_PIXELS           15 // Number of LEDs in the second strip
     #define NEOPIXEL2_BRIGHTNESS      127 // Initial brightness (0-255)
     #define NEOPIXEL2_STARTUP_TEST        // Cycle through colors at startup
+    #define NEOPIXEL_M150_DEFAULT      -1 // Default strip for M150 without 'S'. Use -1 to set all by default.
   #else
     //#define NEOPIXEL2_INSERIES          // Default behavior is NeoPixel 2 in parallel
   #endif

config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/CrealityUI/Configuration.h

@@ -3330,6 +3330,7 @@
     #define NEOPIXEL2_PIXELS           15 // Number of LEDs in the second strip
     #define NEOPIXEL2_BRIGHTNESS      127 // Initial brightness (0-255)
     #define NEOPIXEL2_STARTUP_TEST        // Cycle through colors at startup
+    #define NEOPIXEL_M150_DEFAULT      -1 // Default strip for M150 without 'S'. Use -1 to set all by default.
   #else
     //#define NEOPIXEL2_INSERIES          // Default behavior is NeoPixel 2 in parallel
   #endif

config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/MarlinUI/Configuration.h

@@ -3330,6 +3330,7 @@
     #define NEOPIXEL2_PIXELS           15 // Number of LEDs in the second strip
     #define NEOPIXEL2_BRIGHTNESS      127 // Initial brightness (0-255)
     #define NEOPIXEL2_STARTUP_TEST        // Cycle through colors at startup
+    #define NEOPIXEL_M150_DEFAULT      -1 // Default strip for M150 without 'S'. Use -1 to set all by default.
   #else
     //#define NEOPIXEL2_INSERIES          // Default behavior is NeoPixel 2 in parallel
   #endif

config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 v3/CrealityUI/Configuration.h

@@ -3330,6 +3330,7 @@
     #define NEOPIXEL2_PIXELS           15 // Number of LEDs in the second strip
     #define NEOPIXEL2_BRIGHTNESS      127 // Initial brightness (0-255)
     #define NEOPIXEL2_STARTUP_TEST        // Cycle through colors at startup
+    #define NEOPIXEL_M150_DEFAULT      -1 // Default strip for M150 without 'S'. Use -1 to set all by default.
   #else
     //#define NEOPIXEL2_INSERIES          // Default behavior is NeoPixel 2 in parallel
   #endif

config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 v3/MarlinUI/Configuration.h

@@ -3330,6 +3330,7 @@
     #define NEOPIXEL2_PIXELS           15 // Number of LEDs in the second strip
     #define NEOPIXEL2_BRIGHTNESS      127 // Initial brightness (0-255)
     #define NEOPIXEL2_STARTUP_TEST        // Cycle through colors at startup
+    #define NEOPIXEL_M150_DEFAULT      -1 // Default strip for M150 without 'S'. Use -1 to set all by default.
   #else
     //#define NEOPIXEL2_INSERIES          // Default behavior is NeoPixel 2 in parallel
   #endif

config/examples/Creality/Ender-3 V2/CrealityV422/CrealityUI/Configuration.h

@@ -3330,6 +3330,7 @@
     #define NEOPIXEL2_PIXELS           15 // Number of LEDs in the second strip
     #define NEOPIXEL2_BRIGHTNESS      127 // Initial brightness (0-255)
     #define NEOPIXEL2_STARTUP_TEST        // Cycle through colors at startup
+    #define NEOPIXEL_M150_DEFAULT      -1 // Default strip for M150 without 'S'. Use -1 to set all by default.
   #else
     //#define NEOPIXEL2_INSERIES          // Default behavior is NeoPixel 2 in parallel
   #endif

config/examples/Creality/Ender-3 V2/CrealityV422/MarlinUI/Configuration.h

@@ -3330,6 +3330,7 @@
     #define NEOPIXEL2_PIXELS           15 // Number of LEDs in the second strip
     #define NEOPIXEL2_BRIGHTNESS      127 // Initial brightness (0-255)
     #define NEOPIXEL2_STARTUP_TEST        // Cycle through colors at startup
+    #define NEOPIXEL_M150_DEFAULT      -1 // Default strip for M150 without 'S'. Use -1 to set all by default.
   #else
     //#define NEOPIXEL2_INSERIES          // Default behavior is NeoPixel 2 in parallel
   #endif

config/examples/Creality/Ender-3/BigTreeTech E3 RRF/Configuration.h

@@ -3329,6 +3329,7 @@
     #define NEOPIXEL2_PIXELS           15 // Number of LEDs in the second strip
     #define NEOPIXEL2_BRIGHTNESS      127 // Initial brightness (0-255)
     #define NEOPIXEL2_STARTUP_TEST        // Cycle through colors at startup
+    #define NEOPIXEL_M150_DEFAULT      -1 // Default strip for M150 without 'S'. Use -1 to set all by default.
   #else
     //#define NEOPIXEL2_INSERIES          // Default behavior is NeoPixel 2 in parallel
   #endif