diff --git a/config/examples/Weedo/Tina2/README.md b/config/examples/Weedo/Tina2/README.md
index 222f1ccef9..23216a63e7 100644
--- a/config/examples/Weedo/Tina2/README.md
+++ b/config/examples/Weedo/Tina2/README.md
@@ -1,8 +1,27 @@
-## Product Version
+## Product version
+
 - TINA2 WIFI: TINA2 standard version with ESP32 WIFI module installed. Support remote control, send files via wifi, and online 3d model library.
 - TINA2 BASIC: TINA2 lite version, without WIFI module and protective shell.
-The examples provided here compile without wifi
 
-## Hardware Version
+Please note the monorpice cadet printer is a rebranded version of these printers and the provided configuration should work.
+
+## Hardware version
+
 - V2: The motherboard version is 62AS. The endstop type is lever limit switch.
 - V3: The motherboard version is 62AS. The endstop type is mushroom head limit switch.
+
+## Adding wifi support using ESP3D
+
+You can add wifi support using [ESP3D](https://github.com/luc-github/ESP3D).  
+Basically connect your own NodeMCU to second serial port of the MCU.  
+See ESP3D wiki for connection diagram.
+
+In Marlin configuration.h set:  
+`#define SERIAL_PORT_2 3`
+
+## Manufacturer wifi support
+
+Examples provided here have not been tested with wifi board from manufacturer.  
+Setting `#define SERIAL_PORT_2 3` in Marlin configuration.h might be enough to work with manufacturer wifi board.
+
+Feedback are welcome.
diff --git a/config/examples/Weedo/Tina2/V2/Configuration.h b/config/examples/Weedo/Tina2/V2/Configuration.h
index 6c9e37231e..93a8091da9 100644
--- a/config/examples/Weedo/Tina2/V2/Configuration.h
+++ b/config/examples/Weedo/Tina2/V2/Configuration.h
@@ -98,7 +98,7 @@
 
 // Choose the name from boards.h that matches your setup
 #ifndef MOTHERBOARD
-  #define MOTHERBOARD BOARD_WEEDO_62A_TINA2
+  #define MOTHERBOARD BOARD_WEEDO_62A
 #endif
 
 /**
diff --git a/config/examples/Weedo/Tina2/V3/Configuration.h b/config/examples/Weedo/Tina2/V3/Configuration.h
index 3b39490f55..5331bd8abe 100644
--- a/config/examples/Weedo/Tina2/V3/Configuration.h
+++ b/config/examples/Weedo/Tina2/V3/Configuration.h
@@ -98,7 +98,7 @@
 
 // Choose the name from boards.h that matches your setup
 #ifndef MOTHERBOARD
-  #define MOTHERBOARD BOARD_WEEDO_62A_TINA2
+  #define MOTHERBOARD BOARD_WEEDO_62A
 #endif
 
 /**