diff --git a/config/default/Configuration.h b/config/default/Configuration.h index 96243df5ea..585ae78a86 100644 --- a/config/default/Configuration.h +++ b/config/default/Configuration.h @@ -1353,19 +1353,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/3DFabXYZ/Migbot/Configuration.h b/config/examples/3DFabXYZ/Migbot/Configuration.h index bd7da5b2e2..4520e90614 100644 --- a/config/examples/3DFabXYZ/Migbot/Configuration.h +++ b/config/examples/3DFabXYZ/Migbot/Configuration.h @@ -1355,19 +1355,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/ADIMLab/Gantry v1/Configuration.h b/config/examples/ADIMLab/Gantry v1/Configuration.h index b5017958fd..fcc8e757e0 100644 --- a/config/examples/ADIMLab/Gantry v1/Configuration.h +++ b/config/examples/ADIMLab/Gantry v1/Configuration.h @@ -1353,19 +1353,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/ADIMLab/Gantry v2/Configuration.h b/config/examples/ADIMLab/Gantry v2/Configuration.h index 117fc2eac7..adca31b2da 100644 --- a/config/examples/ADIMLab/Gantry v2/Configuration.h +++ b/config/examples/ADIMLab/Gantry v2/Configuration.h @@ -1353,19 +1353,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/Alfawise/U20-bltouch/Configuration.h b/config/examples/Alfawise/U20-bltouch/Configuration.h index 0a3ac14acb..0af068f010 100644 --- a/config/examples/Alfawise/U20-bltouch/Configuration.h +++ b/config/examples/Alfawise/U20-bltouch/Configuration.h @@ -1422,19 +1422,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/Alfawise/U20/Configuration.h b/config/examples/Alfawise/U20/Configuration.h index 305c91f075..f9d22307c1 100644 --- a/config/examples/Alfawise/U20/Configuration.h +++ b/config/examples/Alfawise/U20/Configuration.h @@ -1423,19 +1423,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/AliExpress/CL-260/Configuration.h b/config/examples/AliExpress/CL-260/Configuration.h index 48ab8496b6..c0a1ebe666 100644 --- a/config/examples/AliExpress/CL-260/Configuration.h +++ b/config/examples/AliExpress/CL-260/Configuration.h @@ -1353,19 +1353,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/AliExpress/UM2pExt/Configuration.h b/config/examples/AliExpress/UM2pExt/Configuration.h index 6332fc1b10..3574a4d77b 100644 --- a/config/examples/AliExpress/UM2pExt/Configuration.h +++ b/config/examples/AliExpress/UM2pExt/Configuration.h @@ -1354,19 +1354,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/Anet/A2/Configuration.h b/config/examples/Anet/A2/Configuration.h index a3fb4930de..d757d25751 100644 --- a/config/examples/Anet/A2/Configuration.h +++ b/config/examples/Anet/A2/Configuration.h @@ -1353,19 +1353,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/Anet/A2plus/Configuration.h b/config/examples/Anet/A2plus/Configuration.h index 0c51019a2f..92b8f55575 100644 --- a/config/examples/Anet/A2plus/Configuration.h +++ b/config/examples/Anet/A2plus/Configuration.h @@ -1353,19 +1353,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/Anet/A6/Configuration.h b/config/examples/Anet/A6/Configuration.h index b685f57d1d..d47e868f63 100644 --- a/config/examples/Anet/A6/Configuration.h +++ b/config/examples/Anet/A6/Configuration.h @@ -1370,19 +1370,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/Anet/A8/Configuration.h b/config/examples/Anet/A8/Configuration.h index bfae1c4b64..0bb1ab4bca 100644 --- a/config/examples/Anet/A8/Configuration.h +++ b/config/examples/Anet/A8/Configuration.h @@ -1356,19 +1356,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/Anet/A8plus/Configuration.h b/config/examples/Anet/A8plus/Configuration.h index acfb56bdf9..977ba1504a 100644 --- a/config/examples/Anet/A8plus/Configuration.h +++ b/config/examples/Anet/A8plus/Configuration.h @@ -1355,19 +1355,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/Anet/A9/Configuration.h b/config/examples/Anet/A9/Configuration.h index 21206ff140..25f862119a 100644 --- a/config/examples/Anet/A9/Configuration.h +++ b/config/examples/Anet/A9/Configuration.h @@ -1353,19 +1353,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/Anet/E10/Configuration.h b/config/examples/Anet/E10/Configuration.h index 50aa9353ee..dab7941240 100644 --- a/config/examples/Anet/E10/Configuration.h +++ b/config/examples/Anet/E10/Configuration.h @@ -1353,19 +1353,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/Anet/E16/BTT SKR 1.3/Configuration.h b/config/examples/Anet/E16/BTT SKR 1.3/Configuration.h index f16ad6abf8..d108055ced 100644 --- a/config/examples/Anet/E16/BTT SKR 1.3/Configuration.h +++ b/config/examples/Anet/E16/BTT SKR 1.3/Configuration.h @@ -1355,19 +1355,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/Anet/E16/Stock/Configuration.h b/config/examples/Anet/E16/Stock/Configuration.h index 9d5087dbc2..937a54d348 100644 --- a/config/examples/Anet/E16/Stock/Configuration.h +++ b/config/examples/Anet/E16/Stock/Configuration.h @@ -1355,19 +1355,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/Anet/ET4+/Configuration.h b/config/examples/Anet/ET4+/Configuration.h index 07b8b018b7..b7407f7031 100644 --- a/config/examples/Anet/ET4+/Configuration.h +++ b/config/examples/Anet/ET4+/Configuration.h @@ -1359,19 +1359,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/Anet/ET4-Pro/Configuration.h b/config/examples/Anet/ET4-Pro/Configuration.h index ae17db73a4..a4d5f2c196 100644 --- a/config/examples/Anet/ET4-Pro/Configuration.h +++ b/config/examples/Anet/ET4-Pro/Configuration.h @@ -1359,19 +1359,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/Anet/ET4/Configuration.h b/config/examples/Anet/ET4/Configuration.h index 12db006efc..41344e20cb 100644 --- a/config/examples/Anet/ET4/Configuration.h +++ b/config/examples/Anet/ET4/Configuration.h @@ -1359,19 +1359,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/Anet/ET4X/Configuration.h b/config/examples/Anet/ET4X/Configuration.h index e7cd06cc95..4330e5119a 100644 --- a/config/examples/Anet/ET4X/Configuration.h +++ b/config/examples/Anet/ET4X/Configuration.h @@ -1359,19 +1359,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/Anet/ET5-Pro/Configuration.h b/config/examples/Anet/ET5-Pro/Configuration.h index b8cf946437..69b89c4b14 100644 --- a/config/examples/Anet/ET5-Pro/Configuration.h +++ b/config/examples/Anet/ET5-Pro/Configuration.h @@ -1353,19 +1353,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/Anet/ET5/Configuration.h b/config/examples/Anet/ET5/Configuration.h index 55a16df626..c98e417071 100644 --- a/config/examples/Anet/ET5/Configuration.h +++ b/config/examples/Anet/ET5/Configuration.h @@ -1353,19 +1353,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/Anet/ET5X/Configuration.h b/config/examples/Anet/ET5X/Configuration.h index c12968e79e..6ca276b6f5 100644 --- a/config/examples/Anet/ET5X/Configuration.h +++ b/config/examples/Anet/ET5X/Configuration.h @@ -1353,19 +1353,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/AnyCubic/Chiron/Configuration.h b/config/examples/AnyCubic/Chiron/Configuration.h index cf3ad7118a..525559cedb 100644 --- a/config/examples/AnyCubic/Chiron/Configuration.h +++ b/config/examples/AnyCubic/Chiron/Configuration.h @@ -1356,19 +1356,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/AnyCubic/Mega Zero 2.0/Anycubic V1/Configuration.h b/config/examples/AnyCubic/Mega Zero 2.0/Anycubic V1/Configuration.h index 8414391501..07b66035b9 100644 --- a/config/examples/AnyCubic/Mega Zero 2.0/Anycubic V1/Configuration.h +++ b/config/examples/AnyCubic/Mega Zero 2.0/Anycubic V1/Configuration.h @@ -1354,19 +1354,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/AnyCubic/Mega Zero/Anycubic V1/Configuration.h b/config/examples/AnyCubic/Mega Zero/Anycubic V1/Configuration.h index e909afa4a5..b150cdc22c 100644 --- a/config/examples/AnyCubic/Mega Zero/Anycubic V1/Configuration.h +++ b/config/examples/AnyCubic/Mega Zero/Anycubic V1/Configuration.h @@ -1354,19 +1354,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/AnyCubic/Mega Zero/BigTreeTech SKR Mini MZ V1.0/Configuration.h b/config/examples/AnyCubic/Mega Zero/BigTreeTech SKR Mini MZ V1.0/Configuration.h index e1defef6b1..2a7f8a6eb5 100644 --- a/config/examples/AnyCubic/Mega Zero/BigTreeTech SKR Mini MZ V1.0/Configuration.h +++ b/config/examples/AnyCubic/Mega Zero/BigTreeTech SKR Mini MZ V1.0/Configuration.h @@ -1353,19 +1353,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/AnyCubic/i3 Mega/Trigorilla AVR/Configuration.h b/config/examples/AnyCubic/i3 Mega/Trigorilla AVR/Configuration.h index 1d33028964..66fe7ea7e8 100644 --- a/config/examples/AnyCubic/i3 Mega/Trigorilla AVR/Configuration.h +++ b/config/examples/AnyCubic/i3 Mega/Trigorilla AVR/Configuration.h @@ -1398,19 +1398,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/AnyCubic/i3 Mega/Trigorilla Pro STM32/Configuration.h b/config/examples/AnyCubic/i3 Mega/Trigorilla Pro STM32/Configuration.h index 1836aa52e6..d26cbb68ec 100644 --- a/config/examples/AnyCubic/i3 Mega/Trigorilla Pro STM32/Configuration.h +++ b/config/examples/AnyCubic/i3 Mega/Trigorilla Pro STM32/Configuration.h @@ -1363,19 +1363,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/AnyCubic/i3/Configuration.h b/config/examples/AnyCubic/i3/Configuration.h index dd42260504..1362b309f6 100644 --- a/config/examples/AnyCubic/i3/Configuration.h +++ b/config/examples/AnyCubic/i3/Configuration.h @@ -1353,19 +1353,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/ArmEd/Configuration.h b/config/examples/ArmEd/Configuration.h index bbcd0c7e74..c19eac93a1 100644 --- a/config/examples/ArmEd/Configuration.h +++ b/config/examples/ArmEd/Configuration.h @@ -1354,19 +1354,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/Artillery/Genius Pro/Configuration.h b/config/examples/Artillery/Genius Pro/Configuration.h index 986642263e..76cd702c8f 100644 --- a/config/examples/Artillery/Genius Pro/Configuration.h +++ b/config/examples/Artillery/Genius Pro/Configuration.h @@ -1353,19 +1353,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -#define Z_MIN_PROBE_PIN PC2 // Pin 32 is the RAMPS default +#define Z_MIN_PROBE_PIN PC2 /** * Probe Type diff --git a/config/examples/Artillery/Genius/BLTouch/Configuration.h b/config/examples/Artillery/Genius/BLTouch/Configuration.h index 873b180209..c99914aef6 100644 --- a/config/examples/Artillery/Genius/BLTouch/Configuration.h +++ b/config/examples/Artillery/Genius/BLTouch/Configuration.h @@ -1353,19 +1353,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -#define Z_MIN_PROBE_PIN 19 // Pin 32 is the RAMPS default +#define Z_MIN_PROBE_PIN 19 /** * Probe Type diff --git a/config/examples/Artillery/Genius/V1/Configuration.h b/config/examples/Artillery/Genius/V1/Configuration.h index 1f0b08029b..3e8b4f1ab7 100644 --- a/config/examples/Artillery/Genius/V1/Configuration.h +++ b/config/examples/Artillery/Genius/V1/Configuration.h @@ -1353,19 +1353,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/Artillery/Hornet/Configuration.h b/config/examples/Artillery/Hornet/Configuration.h index 2b23877656..91c09d8cc4 100644 --- a/config/examples/Artillery/Hornet/Configuration.h +++ b/config/examples/Artillery/Hornet/Configuration.h @@ -1353,19 +1353,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/Artillery/Sidewinder X1/0.9 BMG - E3D V6/Configuration.h b/config/examples/Artillery/Sidewinder X1/0.9 BMG - E3D V6/Configuration.h index eb852f74f1..5799bc5eb8 100644 --- a/config/examples/Artillery/Sidewinder X1/0.9 BMG - E3D V6/Configuration.h +++ b/config/examples/Artillery/Sidewinder X1/0.9 BMG - E3D V6/Configuration.h @@ -1369,19 +1369,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/Artillery/Sidewinder X1/V1/Configuration.h b/config/examples/Artillery/Sidewinder X1/V1/Configuration.h index 0cf5571c37..46cb8581da 100644 --- a/config/examples/Artillery/Sidewinder X1/V1/Configuration.h +++ b/config/examples/Artillery/Sidewinder X1/V1/Configuration.h @@ -1353,19 +1353,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/Artillery/Sidewinder X2/Configuration.h b/config/examples/Artillery/Sidewinder X2/Configuration.h index 9f7641c412..a870840130 100644 --- a/config/examples/Artillery/Sidewinder X2/Configuration.h +++ b/config/examples/Artillery/Sidewinder X2/Configuration.h @@ -1353,17 +1353,15 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ #define Z_MIN_PROBE_PIN PC2 diff --git a/config/examples/Azteeg/X5GT/Configuration.h b/config/examples/Azteeg/X5GT/Configuration.h index f507a588dc..c971b8c0dd 100644 --- a/config/examples/Azteeg/X5GT/Configuration.h +++ b/config/examples/Azteeg/X5GT/Configuration.h @@ -1353,19 +1353,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/BIBO/TouchX/cyclops/Configuration.h b/config/examples/BIBO/TouchX/cyclops/Configuration.h index 7d10aea9c9..eab90687a6 100644 --- a/config/examples/BIBO/TouchX/cyclops/Configuration.h +++ b/config/examples/BIBO/TouchX/cyclops/Configuration.h @@ -1353,19 +1353,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/BIBO/TouchX/default/Configuration.h b/config/examples/BIBO/TouchX/default/Configuration.h index 3a360a7a60..8d925f024e 100644 --- a/config/examples/BIBO/TouchX/default/Configuration.h +++ b/config/examples/BIBO/TouchX/default/Configuration.h @@ -1353,19 +1353,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/BIQU/B1 SE Plus/Configuration.h b/config/examples/BIQU/B1 SE Plus/Configuration.h index 8f10f05c82..075dbfac30 100644 --- a/config/examples/BIQU/B1 SE Plus/Configuration.h +++ b/config/examples/BIQU/B1 SE Plus/Configuration.h @@ -1351,19 +1351,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/BIQU/B1 SE/Configuration.h b/config/examples/BIQU/B1 SE/Configuration.h index a1c37f8310..8713d50886 100644 --- a/config/examples/BIQU/B1 SE/Configuration.h +++ b/config/examples/BIQU/B1 SE/Configuration.h @@ -1351,19 +1351,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/BIQU/B1/Configuration.h b/config/examples/BIQU/B1/Configuration.h index 369bfb406e..3403a623e3 100644 --- a/config/examples/BIQU/B1/Configuration.h +++ b/config/examples/BIQU/B1/Configuration.h @@ -1364,19 +1364,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/BIQU/BX/Configuration.h b/config/examples/BIQU/BX/Configuration.h index 1a339e139c..25e34badf5 100644 --- a/config/examples/BIQU/BX/Configuration.h +++ b/config/examples/BIQU/BX/Configuration.h @@ -1360,19 +1360,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/BIQU/Hurakan/Configuration.h b/config/examples/BIQU/Hurakan/Configuration.h index d8caf4fced..ad76c0b763 100644 --- a/config/examples/BIQU/Hurakan/Configuration.h +++ b/config/examples/BIQU/Hurakan/Configuration.h @@ -1353,19 +1353,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/BIQU/Thunder Standard/Configuration.h b/config/examples/BIQU/Thunder Standard/Configuration.h index da2ebd4bd1..866ab5c678 100644 --- a/config/examples/BIQU/Thunder Standard/Configuration.h +++ b/config/examples/BIQU/Thunder Standard/Configuration.h @@ -1353,17 +1353,15 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ #define Z_MIN_PROBE_PIN P1_29 // Z Max Pin diff --git a/config/examples/BQ/Hephestos/Configuration.h b/config/examples/BQ/Hephestos/Configuration.h index 30dbeb1b60..b979fc31b5 100644 --- a/config/examples/BQ/Hephestos/Configuration.h +++ b/config/examples/BQ/Hephestos/Configuration.h @@ -1354,19 +1354,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/BQ/Hephestos_2/Configuration.h b/config/examples/BQ/Hephestos_2/Configuration.h index 1af628bd05..15c1be7760 100644 --- a/config/examples/BQ/Hephestos_2/Configuration.h +++ b/config/examples/BQ/Hephestos_2/Configuration.h @@ -1367,19 +1367,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/BQ/WITBOX/Configuration.h b/config/examples/BQ/WITBOX/Configuration.h index 5a328988f6..21cb458ddc 100644 --- a/config/examples/BQ/WITBOX/Configuration.h +++ b/config/examples/BQ/WITBOX/Configuration.h @@ -1354,19 +1354,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/CTC/A13/Configuration.h b/config/examples/CTC/A13/Configuration.h index 371797bc67..f7fc09f880 100644 --- a/config/examples/CTC/A13/Configuration.h +++ b/config/examples/CTC/A13/Configuration.h @@ -1354,19 +1354,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/CTC/Bizer/Configuration.h b/config/examples/CTC/Bizer/Configuration.h index efcf51dfeb..df78a72e11 100644 --- a/config/examples/CTC/Bizer/Configuration.h +++ b/config/examples/CTC/Bizer/Configuration.h @@ -1353,19 +1353,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/CTC/i3 2560 Rev A/no probe/Configuration.h b/config/examples/CTC/i3 2560 Rev A/no probe/Configuration.h index c55eb91a56..51a1b38f6d 100644 --- a/config/examples/CTC/i3 2560 Rev A/no probe/Configuration.h +++ b/config/examples/CTC/i3 2560 Rev A/no probe/Configuration.h @@ -1354,19 +1354,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/Cartesio/Configuration.h b/config/examples/Cartesio/Configuration.h index 837c74a80b..5967fd2e6a 100644 --- a/config/examples/Cartesio/Configuration.h +++ b/config/examples/Cartesio/Configuration.h @@ -1369,19 +1369,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/Copymaster3D/300/Configuration.h b/config/examples/Copymaster3D/300/Configuration.h index d061786d98..c6c67857a2 100644 --- a/config/examples/Copymaster3D/300/Configuration.h +++ b/config/examples/Copymaster3D/300/Configuration.h @@ -1354,19 +1354,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/Copymaster3D/400/Configuration.h b/config/examples/Copymaster3D/400/Configuration.h index df2ab264e0..a15c7e49f8 100644 --- a/config/examples/Copymaster3D/400/Configuration.h +++ b/config/examples/Copymaster3D/400/Configuration.h @@ -1353,19 +1353,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/Copymaster3D/500/Configuration.h b/config/examples/Copymaster3D/500/Configuration.h index 8c8e926552..35e2ebbb40 100644 --- a/config/examples/Copymaster3D/500/Configuration.h +++ b/config/examples/Copymaster3D/500/Configuration.h @@ -1354,19 +1354,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/Creality/CR-10 Mini/BigTreeTech SKR Mini E3 2.0/Configuration.h b/config/examples/Creality/CR-10 Mini/BigTreeTech SKR Mini E3 2.0/Configuration.h index 338f097f14..ea1eaef466 100644 --- a/config/examples/Creality/CR-10 Mini/BigTreeTech SKR Mini E3 2.0/Configuration.h +++ b/config/examples/Creality/CR-10 Mini/BigTreeTech SKR Mini E3 2.0/Configuration.h @@ -1361,20 +1361,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default -#define Z_MIN_PROBE_PIN PC14 //Zstop Pin in Z-Probe port +#define Z_MIN_PROBE_PIN PC14 // Zstop Pin in Z-Probe port /** * Probe Type diff --git a/config/examples/Creality/CR-10 Mini/CrealityV1/Configuration.h b/config/examples/Creality/CR-10 Mini/CrealityV1/Configuration.h index 5cf3f270a2..3695113e7f 100644 --- a/config/examples/Creality/CR-10 Mini/CrealityV1/Configuration.h +++ b/config/examples/Creality/CR-10 Mini/CrealityV1/Configuration.h @@ -1362,19 +1362,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/Creality/CR-10 Mini/MEEB-3DP/Configuration.h b/config/examples/Creality/CR-10 Mini/MEEB-3DP/Configuration.h index 8317ef749c..ae9330200c 100644 --- a/config/examples/Creality/CR-10 Mini/MEEB-3DP/Configuration.h +++ b/config/examples/Creality/CR-10 Mini/MEEB-3DP/Configuration.h @@ -1353,19 +1353,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/Creality/CR-10 S4/CrealityV1/Configuration.h b/config/examples/Creality/CR-10 S4/CrealityV1/Configuration.h index 8f0e244f62..fb1e0f9bf5 100644 --- a/config/examples/Creality/CR-10 S4/CrealityV1/Configuration.h +++ b/config/examples/Creality/CR-10 S4/CrealityV1/Configuration.h @@ -1354,19 +1354,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 1.2 with TFT35 E3 V3.0/Configuration.h b/config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 1.2 with TFT35 E3 V3.0/Configuration.h index c8e6e21135..10322b9dd3 100644 --- a/config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 1.2 with TFT35 E3 V3.0/Configuration.h +++ b/config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 1.2 with TFT35 E3 V3.0/Configuration.h @@ -1354,19 +1354,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 v3/Configuration.h b/config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 v3/Configuration.h index a74c2a0d6d..b54c2b50a8 100644 --- a/config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 v3/Configuration.h +++ b/config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 v3/Configuration.h @@ -1353,19 +1353,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/Creality/CR-10 S5/CrealityV1/Configuration.h b/config/examples/Creality/CR-10 S5/CrealityV1/Configuration.h index 8343de9e31..f676cdd3ea 100644 --- a/config/examples/Creality/CR-10 S5/CrealityV1/Configuration.h +++ b/config/examples/Creality/CR-10 S5/CrealityV1/Configuration.h @@ -1354,19 +1354,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/Creality/CR-10 S5/CrealityV2.2-BLTouch/Configuration.h b/config/examples/Creality/CR-10 S5/CrealityV2.2-BLTouch/Configuration.h index 2a8055fcf9..3d13396ed0 100644 --- a/config/examples/Creality/CR-10 S5/CrealityV2.2-BLTouch/Configuration.h +++ b/config/examples/Creality/CR-10 S5/CrealityV2.2-BLTouch/Configuration.h @@ -1355,19 +1355,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/Creality/CR-10 V2/Configuration.h b/config/examples/Creality/CR-10 V2/Configuration.h index c2dafd6d59..6ec1c732c1 100644 --- a/config/examples/Creality/CR-10 V2/Configuration.h +++ b/config/examples/Creality/CR-10 V2/Configuration.h @@ -1365,19 +1365,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 #if ENABLED(CR10V2_BLTOUCH) #define Z_MIN_PROBE_PIN 19 diff --git a/config/examples/Creality/CR-10 V3/Configuration.h b/config/examples/Creality/CR-10 V3/Configuration.h index d2c893f98e..99088d2d70 100644 --- a/config/examples/Creality/CR-10 V3/Configuration.h +++ b/config/examples/Creality/CR-10 V3/Configuration.h @@ -1366,19 +1366,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 #if ENABLED(CR10V3_BLTOUCH) #define Z_MIN_PROBE_PIN 19 diff --git a/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 2.0/Configuration.h b/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 2.0/Configuration.h index 644fe1fe8f..b2c1e6b05b 100644 --- a/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 2.0/Configuration.h +++ b/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 2.0/Configuration.h @@ -1352,19 +1352,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/Creality/CR-10/CrealityV1/Configuration.h b/config/examples/Creality/CR-10/CrealityV1/Configuration.h index 53461fed76..8beeefc936 100644 --- a/config/examples/Creality/CR-10/CrealityV1/Configuration.h +++ b/config/examples/Creality/CR-10/CrealityV1/Configuration.h @@ -1353,19 +1353,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/Creality/CR-10S/BigTreeTech SKR 1.4 Turbo TMC2209/Configuration.h b/config/examples/Creality/CR-10S/BigTreeTech SKR 1.4 Turbo TMC2209/Configuration.h index fd9634e610..25f323624c 100644 --- a/config/examples/Creality/CR-10S/BigTreeTech SKR 1.4 Turbo TMC2209/Configuration.h +++ b/config/examples/Creality/CR-10S/BigTreeTech SKR 1.4 Turbo TMC2209/Configuration.h @@ -1353,19 +1353,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/Creality/CR-10S/BigTreeTech SKR 2.0 TMC2209/Configuration.h b/config/examples/Creality/CR-10S/BigTreeTech SKR 2.0 TMC2209/Configuration.h index 884e7b8906..f3adb037ca 100644 --- a/config/examples/Creality/CR-10S/BigTreeTech SKR 2.0 TMC2209/Configuration.h +++ b/config/examples/Creality/CR-10S/BigTreeTech SKR 2.0 TMC2209/Configuration.h @@ -1353,19 +1353,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -#define Z_MIN_PROBE_PIN PE4 // Pin 32 is the RAMPS default +#define Z_MIN_PROBE_PIN PE4 /** * Probe Type diff --git a/config/examples/Creality/CR-10S/BigTreeTech SKR Mini E3 2.0/Configuration.h b/config/examples/Creality/CR-10S/BigTreeTech SKR Mini E3 2.0/Configuration.h index a7cbb66d59..31e7312401 100644 --- a/config/examples/Creality/CR-10S/BigTreeTech SKR Mini E3 2.0/Configuration.h +++ b/config/examples/Creality/CR-10S/BigTreeTech SKR Mini E3 2.0/Configuration.h @@ -1354,19 +1354,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/Creality/CR-10S/BigTreeTech SKR Pro v1.2/Configuration.h b/config/examples/Creality/CR-10S/BigTreeTech SKR Pro v1.2/Configuration.h index 6e05a4d73a..472f58d609 100644 --- a/config/examples/Creality/CR-10S/BigTreeTech SKR Pro v1.2/Configuration.h +++ b/config/examples/Creality/CR-10S/BigTreeTech SKR Pro v1.2/Configuration.h @@ -1353,19 +1353,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -#define Z_MIN_PROBE_PIN PA2 // Pin 32 is the RAMPS default +#define Z_MIN_PROBE_PIN PA2 /** * Probe Type diff --git a/config/examples/Creality/CR-10S/CrealityV1/Configuration.h b/config/examples/Creality/CR-10S/CrealityV1/Configuration.h index 51908fe298..14737a1665 100644 --- a/config/examples/Creality/CR-10S/CrealityV1/Configuration.h +++ b/config/examples/Creality/CR-10S/CrealityV1/Configuration.h @@ -1353,19 +1353,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/Creality/CR-20 Pro/Configuration.h b/config/examples/Creality/CR-20 Pro/Configuration.h index 01356832d9..65d591c4a7 100644 --- a/config/examples/Creality/CR-20 Pro/Configuration.h +++ b/config/examples/Creality/CR-20 Pro/Configuration.h @@ -1354,19 +1354,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/Creality/CR-20/RepRapWorld Minitronics20/Configuration.h b/config/examples/Creality/CR-20/RepRapWorld Minitronics20/Configuration.h index ed704ba293..3a20607fef 100644 --- a/config/examples/Creality/CR-20/RepRapWorld Minitronics20/Configuration.h +++ b/config/examples/Creality/CR-20/RepRapWorld Minitronics20/Configuration.h @@ -1354,19 +1354,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/Creality/CR-20/Stock/Configuration.h b/config/examples/Creality/CR-20/Stock/Configuration.h index ec158065d6..f217d393d6 100644 --- a/config/examples/Creality/CR-20/Stock/Configuration.h +++ b/config/examples/Creality/CR-20/Stock/Configuration.h @@ -1354,19 +1354,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/Creality/CR-30 PrintMill/Configuration.h b/config/examples/Creality/CR-30 PrintMill/Configuration.h index de4480d4c7..43b3743077 100644 --- a/config/examples/Creality/CR-30 PrintMill/Configuration.h +++ b/config/examples/Creality/CR-30 PrintMill/Configuration.h @@ -1353,19 +1353,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/Creality/CR-6 SE/Configuration.h b/config/examples/Creality/CR-6 SE/Configuration.h index 6bbe0d1742..cfc4e7da62 100644 --- a/config/examples/Creality/CR-6 SE/Configuration.h +++ b/config/examples/Creality/CR-6 SE/Configuration.h @@ -1353,19 +1353,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/Creality/CR-8/Configuration.h b/config/examples/Creality/CR-8/Configuration.h index b8e59770cf..92a464f0ec 100644 --- a/config/examples/Creality/CR-8/Configuration.h +++ b/config/examples/Creality/CR-8/Configuration.h @@ -1353,19 +1353,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/Creality/Ender-2 Pro/CrealityV423/Configuration.h b/config/examples/Creality/Ender-2 Pro/CrealityV423/Configuration.h index d58821931d..af7c7654c5 100644 --- a/config/examples/Creality/Ender-2 Pro/CrealityV423/Configuration.h +++ b/config/examples/Creality/Ender-2 Pro/CrealityV423/Configuration.h @@ -1353,19 +1353,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/Creality/Ender-2/Configuration.h b/config/examples/Creality/Ender-2/Configuration.h index ade2ee1761..432203d7c7 100644 --- a/config/examples/Creality/Ender-2/Configuration.h +++ b/config/examples/Creality/Ender-2/Configuration.h @@ -1354,19 +1354,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/Creality/Ender-3 Max/Configuration.h b/config/examples/Creality/Ender-3 Max/Configuration.h index 7dad1a6576..bc21110d74 100644 --- a/config/examples/Creality/Ender-3 Max/Configuration.h +++ b/config/examples/Creality/Ender-3 Max/Configuration.h @@ -1357,19 +1357,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/Creality/Ender-3 Neo/Configuration.h b/config/examples/Creality/Ender-3 Neo/Configuration.h index aa58ea08e5..217608de91 100644 --- a/config/examples/Creality/Ender-3 Neo/Configuration.h +++ b/config/examples/Creality/Ender-3 Neo/Configuration.h @@ -1354,19 +1354,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR 1.4 Turbo/Configuration.h b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR 1.4 Turbo/Configuration.h index 7ac309613f..44f6267eea 100644 --- a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR 1.4 Turbo/Configuration.h +++ b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR 1.4 Turbo/Configuration.h @@ -1353,19 +1353,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.0/Configuration.h b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.0/Configuration.h index 48a1d30a6e..15e694fe39 100644 --- a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.0/Configuration.h +++ b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.0/Configuration.h @@ -1353,19 +1353,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.2/Configuration.h b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.2/Configuration.h index 563b692270..188f6d61c1 100644 --- a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.2/Configuration.h +++ b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.2/Configuration.h @@ -1353,19 +1353,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 2.0/Configuration.h b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 2.0/Configuration.h index 1f085425be..664d16356e 100644 --- a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 2.0/Configuration.h +++ b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 2.0/Configuration.h @@ -1353,19 +1353,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 3.0/Configuration.h b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 3.0/Configuration.h index 2be47c0fd1..d2548a6589 100644 --- a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 3.0/Configuration.h +++ b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 3.0/Configuration.h @@ -1353,19 +1353,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/Creality/Ender-3 Pro/CrealityV1/Configuration.h b/config/examples/Creality/Ender-3 Pro/CrealityV1/Configuration.h index d8930c3975..b6e328e697 100644 --- a/config/examples/Creality/Ender-3 Pro/CrealityV1/Configuration.h +++ b/config/examples/Creality/Ender-3 Pro/CrealityV1/Configuration.h @@ -1354,19 +1354,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/Creality/Ender-3 Pro/CrealityV422/Configuration.h b/config/examples/Creality/Ender-3 Pro/CrealityV422/Configuration.h index 690791b07f..9e60ae5d88 100644 --- a/config/examples/Creality/Ender-3 Pro/CrealityV422/Configuration.h +++ b/config/examples/Creality/Ender-3 Pro/CrealityV422/Configuration.h @@ -1353,19 +1353,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/Creality/Ender-3 Pro/CrealityV427/Configuration.h b/config/examples/Creality/Ender-3 Pro/CrealityV427/Configuration.h index e241a822f1..961c293752 100644 --- a/config/examples/Creality/Ender-3 Pro/CrealityV427/Configuration.h +++ b/config/examples/Creality/Ender-3 Pro/CrealityV427/Configuration.h @@ -1354,19 +1354,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/Creality/Ender-3 S1/STM32F1/Configuration.h b/config/examples/Creality/Ender-3 S1/STM32F1/Configuration.h index 16ac4894f5..6253ccdbe1 100644 --- a/config/examples/Creality/Ender-3 S1/STM32F1/Configuration.h +++ b/config/examples/Creality/Ender-3 S1/STM32F1/Configuration.h @@ -1353,19 +1353,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/Creality/Ender-3 S1/STM32F4/Configuration.h b/config/examples/Creality/Ender-3 S1/STM32F4/Configuration.h index 46eab96a25..2f9f941af1 100644 --- a/config/examples/Creality/Ender-3 S1/STM32F4/Configuration.h +++ b/config/examples/Creality/Ender-3 S1/STM32F4/Configuration.h @@ -1353,19 +1353,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/Creality/Ender-3 V2 Neo/Configuration.h b/config/examples/Creality/Ender-3 V2 Neo/Configuration.h index 36b8cab2d5..02c2542841 100644 --- a/config/examples/Creality/Ender-3 V2 Neo/Configuration.h +++ b/config/examples/Creality/Ender-3 V2 Neo/Configuration.h @@ -1354,19 +1354,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/CrealityUI/Configuration.h b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/CrealityUI/Configuration.h index 0433a9ca7c..db781a61d1 100644 --- a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/CrealityUI/Configuration.h +++ b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/CrealityUI/Configuration.h @@ -1353,19 +1353,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/MarlinUI/Configuration.h b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/MarlinUI/Configuration.h index 3b8be4ede5..e2dda12232 100644 --- a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/MarlinUI/Configuration.h +++ b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/MarlinUI/Configuration.h @@ -1353,19 +1353,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 v3/CrealityUI/Configuration.h b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 v3/CrealityUI/Configuration.h index 39c4a209b3..51ecf3b027 100644 --- a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 v3/CrealityUI/Configuration.h +++ b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 v3/CrealityUI/Configuration.h @@ -1353,19 +1353,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 v3/MarlinUI/Configuration.h b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 v3/MarlinUI/Configuration.h index 9a93d95af8..2168330227 100644 --- a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 v3/MarlinUI/Configuration.h +++ b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 v3/MarlinUI/Configuration.h @@ -1353,19 +1353,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/Creality/Ender-3 V2/CrealityV422/CrealityUI/Configuration.h b/config/examples/Creality/Ender-3 V2/CrealityV422/CrealityUI/Configuration.h index 4244440d27..06273c13ea 100644 --- a/config/examples/Creality/Ender-3 V2/CrealityV422/CrealityUI/Configuration.h +++ b/config/examples/Creality/Ender-3 V2/CrealityV422/CrealityUI/Configuration.h @@ -1353,19 +1353,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/Creality/Ender-3 V2/CrealityV422/MarlinUI/Configuration.h b/config/examples/Creality/Ender-3 V2/CrealityV422/MarlinUI/Configuration.h index daf2ecd9f4..6eabeef51d 100644 --- a/config/examples/Creality/Ender-3 V2/CrealityV422/MarlinUI/Configuration.h +++ b/config/examples/Creality/Ender-3 V2/CrealityV422/MarlinUI/Configuration.h @@ -1353,19 +1353,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/Creality/Ender-3/BigTreeTech E3 RRF/Configuration.h b/config/examples/Creality/Ender-3/BigTreeTech E3 RRF/Configuration.h index d984bbfc38..e82ad49f7f 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech E3 RRF/Configuration.h +++ b/config/examples/Creality/Ender-3/BigTreeTech E3 RRF/Configuration.h @@ -1352,19 +1352,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR 1.4/Configuration.h b/config/examples/Creality/Ender-3/BigTreeTech SKR 1.4/Configuration.h index 66c4685d58..f444dd9f5f 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR 1.4/Configuration.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR 1.4/Configuration.h @@ -1354,19 +1354,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/2-into-1 Hotend/Configuration.h b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/2-into-1 Hotend/Configuration.h index e0a2a3a539..308100719d 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/2-into-1 Hotend/Configuration.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/2-into-1 Hotend/Configuration.h @@ -1352,19 +1352,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Dual Z/Configuration.h b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Dual Z/Configuration.h index e029a21f91..f71f8f4ea0 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Dual Z/Configuration.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Dual Z/Configuration.h @@ -1352,19 +1352,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Single Extruder/Configuration.h b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Single Extruder/Configuration.h index 6e3810fda3..a6003f7331 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Single Extruder/Configuration.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Single Extruder/Configuration.h @@ -1352,19 +1352,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR E3-DIP V1.1/Configuration.h b/config/examples/Creality/Ender-3/BigTreeTech SKR E3-DIP V1.1/Configuration.h index 26afe0a0c6..4bb9b65dac 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR E3-DIP V1.1/Configuration.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR E3-DIP V1.1/Configuration.h @@ -1353,19 +1353,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.0/Configuration.h b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.0/Configuration.h index fdf6344d24..6426a39d8c 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.0/Configuration.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.0/Configuration.h @@ -1352,19 +1352,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.2/Configuration.h b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.2/Configuration.h index aa4b3a7372..082be5c636 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.2/Configuration.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.2/Configuration.h @@ -1352,19 +1352,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 2.0/Configuration.h b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 2.0/Configuration.h index 98e82f20a1..0a84406c5c 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 2.0/Configuration.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 2.0/Configuration.h @@ -1352,19 +1352,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 3.0/Configuration.h b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 3.0/Configuration.h index 704b24971d..ca633e2d06 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 3.0/Configuration.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 3.0/Configuration.h @@ -1353,19 +1353,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/Creality/Ender-3/CrealityV1/Configuration.h b/config/examples/Creality/Ender-3/CrealityV1/Configuration.h index 14ad7d0299..90aaa4685a 100644 --- a/config/examples/Creality/Ender-3/CrealityV1/Configuration.h +++ b/config/examples/Creality/Ender-3/CrealityV1/Configuration.h @@ -1354,19 +1354,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/Creality/Ender-3/CrealityV422/Configuration.h b/config/examples/Creality/Ender-3/CrealityV422/Configuration.h index 4ed52da481..bd7a05a3f9 100644 --- a/config/examples/Creality/Ender-3/CrealityV422/Configuration.h +++ b/config/examples/Creality/Ender-3/CrealityV422/Configuration.h @@ -1360,19 +1360,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/Creality/Ender-3/CrealityV427/Configuration.h b/config/examples/Creality/Ender-3/CrealityV427/Configuration.h index 6f3f845708..a6629d47e5 100644 --- a/config/examples/Creality/Ender-3/CrealityV427/Configuration.h +++ b/config/examples/Creality/Ender-3/CrealityV427/Configuration.h @@ -1354,19 +1354,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/BLTouch/Configuration.h b/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/BLTouch/Configuration.h index b286060873..7a193b4614 100644 --- a/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/BLTouch/Configuration.h +++ b/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/BLTouch/Configuration.h @@ -1354,19 +1354,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/base/Configuration.h b/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/base/Configuration.h index 23e90cd13c..d7fca6ac72 100644 --- a/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/base/Configuration.h +++ b/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/base/Configuration.h @@ -1354,19 +1354,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/Creality/Ender-3/FYSETC Cheetah 2.0/Configuration.h b/config/examples/Creality/Ender-3/FYSETC Cheetah 2.0/Configuration.h index c11af44d54..d98c20392c 100644 --- a/config/examples/Creality/Ender-3/FYSETC Cheetah 2.0/Configuration.h +++ b/config/examples/Creality/Ender-3/FYSETC Cheetah 2.0/Configuration.h @@ -1354,19 +1354,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/Creality/Ender-3/FYSETC Cheetah/BLTouch/Configuration.h b/config/examples/Creality/Ender-3/FYSETC Cheetah/BLTouch/Configuration.h index f2487928eb..bdb2228b5b 100644 --- a/config/examples/Creality/Ender-3/FYSETC Cheetah/BLTouch/Configuration.h +++ b/config/examples/Creality/Ender-3/FYSETC Cheetah/BLTouch/Configuration.h @@ -1354,19 +1354,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/Creality/Ender-3/FYSETC Cheetah/base/Configuration.h b/config/examples/Creality/Ender-3/FYSETC Cheetah/base/Configuration.h index 8827f9a4c3..894fcfdf66 100644 --- a/config/examples/Creality/Ender-3/FYSETC Cheetah/base/Configuration.h +++ b/config/examples/Creality/Ender-3/FYSETC Cheetah/base/Configuration.h @@ -1354,19 +1354,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/Creality/Ender-3/MEEB-3DP/Configuration.h b/config/examples/Creality/Ender-3/MEEB-3DP/Configuration.h index 421d7e9780..7a877c5856 100644 --- a/config/examples/Creality/Ender-3/MEEB-3DP/Configuration.h +++ b/config/examples/Creality/Ender-3/MEEB-3DP/Configuration.h @@ -1359,19 +1359,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/Creality/Ender-3/MKS Robin E3/V1.0/Configuration.h b/config/examples/Creality/Ender-3/MKS Robin E3/V1.0/Configuration.h index 06cf8cd55e..da8389bcba 100644 --- a/config/examples/Creality/Ender-3/MKS Robin E3/V1.0/Configuration.h +++ b/config/examples/Creality/Ender-3/MKS Robin E3/V1.0/Configuration.h @@ -1352,19 +1352,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/Creality/Ender-3/MKS Robin E3/V1.1/Configuration.h b/config/examples/Creality/Ender-3/MKS Robin E3/V1.1/Configuration.h index fafb8c3084..5ab01017b3 100644 --- a/config/examples/Creality/Ender-3/MKS Robin E3/V1.1/Configuration.h +++ b/config/examples/Creality/Ender-3/MKS Robin E3/V1.1/Configuration.h @@ -1352,19 +1352,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/Creality/Ender-3/MKS Robin E3P/Configuration.h b/config/examples/Creality/Ender-3/MKS Robin E3P/Configuration.h index 0291c48f93..3f5f9291a4 100644 --- a/config/examples/Creality/Ender-3/MKS Robin E3P/Configuration.h +++ b/config/examples/Creality/Ender-3/MKS Robin E3P/Configuration.h @@ -1354,19 +1354,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/Creality/Ender-3/TH3D EZBoard Lite V2/Configuration.h b/config/examples/Creality/Ender-3/TH3D EZBoard Lite V2/Configuration.h index 4b8436b541..9731118e07 100644 --- a/config/examples/Creality/Ender-3/TH3D EZBoard Lite V2/Configuration.h +++ b/config/examples/Creality/Ender-3/TH3D EZBoard Lite V2/Configuration.h @@ -1354,19 +1354,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/Creality/Ender-4/Configuration.h b/config/examples/Creality/Ender-4/Configuration.h index 1809a3cbd6..16b1e616c6 100644 --- a/config/examples/Creality/Ender-4/Configuration.h +++ b/config/examples/Creality/Ender-4/Configuration.h @@ -1353,19 +1353,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/Creality/Ender-5 Plus/BigTreeTech SKR 3/Configuration.h b/config/examples/Creality/Ender-5 Plus/BigTreeTech SKR 3/Configuration.h index 999ff0186c..0050fa5f1c 100644 --- a/config/examples/Creality/Ender-5 Plus/BigTreeTech SKR 3/Configuration.h +++ b/config/examples/Creality/Ender-5 Plus/BigTreeTech SKR 3/Configuration.h @@ -1353,19 +1353,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/Creality/Ender-5 Plus/CrealityV1/Configuration.h b/config/examples/Creality/Ender-5 Plus/CrealityV1/Configuration.h index 4d69d76856..985031ab7a 100644 --- a/config/examples/Creality/Ender-5 Plus/CrealityV1/Configuration.h +++ b/config/examples/Creality/Ender-5 Plus/CrealityV1/Configuration.h @@ -1362,19 +1362,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR E3 Turbo/Configuration.h b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR E3 Turbo/Configuration.h index 2ecab7d58e..493342ae86 100644 --- a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR E3 Turbo/Configuration.h +++ b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR E3 Turbo/Configuration.h @@ -1359,19 +1359,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 1.2/Configuration.h b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 1.2/Configuration.h index 8769050db4..114515dc44 100644 --- a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 1.2/Configuration.h +++ b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 1.2/Configuration.h @@ -1352,19 +1352,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 2.0 with BLTouch/Configuration.h b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 2.0 with BLTouch/Configuration.h index 1a86bc3b82..4b1b11fe45 100644 --- a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 2.0 with BLTouch/Configuration.h +++ b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 2.0 with BLTouch/Configuration.h @@ -1354,19 +1354,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -#define Z_MIN_PROBE_PIN PC14 // Pin 32 is the RAMPS default +#define Z_MIN_PROBE_PIN PC14 /** * Probe Type diff --git a/config/examples/Creality/Ender-5 Pro/CrealityV1/Configuration.h b/config/examples/Creality/Ender-5 Pro/CrealityV1/Configuration.h index 73e491f314..cd45a40a8f 100644 --- a/config/examples/Creality/Ender-5 Pro/CrealityV1/Configuration.h +++ b/config/examples/Creality/Ender-5 Pro/CrealityV1/Configuration.h @@ -1354,19 +1354,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/Creality/Ender-5 Pro/CrealityV422/Configuration.h b/config/examples/Creality/Ender-5 Pro/CrealityV422/Configuration.h index 2d4b326350..3b32d69e15 100644 --- a/config/examples/Creality/Ender-5 Pro/CrealityV422/Configuration.h +++ b/config/examples/Creality/Ender-5 Pro/CrealityV422/Configuration.h @@ -1365,19 +1365,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -#define Z_MIN_PROBE_PIN PB1 // Pin 32 is the RAMPS default +#define Z_MIN_PROBE_PIN PB1 /** * Probe Type diff --git a/config/examples/Creality/Ender-5 Pro/CrealityV427/Configuration.h b/config/examples/Creality/Ender-5 Pro/CrealityV427/Configuration.h index 624c4915fa..2fcae35223 100644 --- a/config/examples/Creality/Ender-5 Pro/CrealityV427/Configuration.h +++ b/config/examples/Creality/Ender-5 Pro/CrealityV427/Configuration.h @@ -1354,19 +1354,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/Creality/Ender-5 S1/Configuration.h b/config/examples/Creality/Ender-5 S1/Configuration.h index aea0b9a75a..c6ce6037df 100644 --- a/config/examples/Creality/Ender-5 S1/Configuration.h +++ b/config/examples/Creality/Ender-5 S1/Configuration.h @@ -1396,19 +1396,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo with BLTouch/Configuration.h b/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo with BLTouch/Configuration.h index 806e9f8652..a5b34e198a 100644 --- a/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo with BLTouch/Configuration.h +++ b/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo with BLTouch/Configuration.h @@ -1354,19 +1354,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo/Configuration.h b/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo/Configuration.h index 69caaf59ff..7d246ec0dc 100644 --- a/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo/Configuration.h +++ b/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo/Configuration.h @@ -1354,19 +1354,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 1.2/Configuration.h b/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 1.2/Configuration.h index 966c7f11f6..996897790f 100644 --- a/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 1.2/Configuration.h +++ b/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 1.2/Configuration.h @@ -1352,19 +1352,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 2.0/Configuration.h b/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 2.0/Configuration.h index fef41459bd..103c476864 100644 --- a/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 2.0/Configuration.h +++ b/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 2.0/Configuration.h @@ -1352,19 +1352,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/Creality/Ender-5/CrealityV1/Configuration.h b/config/examples/Creality/Ender-5/CrealityV1/Configuration.h index e52a98eebc..7fd6147ae9 100644 --- a/config/examples/Creality/Ender-5/CrealityV1/Configuration.h +++ b/config/examples/Creality/Ender-5/CrealityV1/Configuration.h @@ -1354,19 +1354,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/Creality/Ender-5/CrealityV427/Configuration.h b/config/examples/Creality/Ender-5/CrealityV427/Configuration.h index e46e8cec46..0dc1df56d7 100644 --- a/config/examples/Creality/Ender-5/CrealityV427/Configuration.h +++ b/config/examples/Creality/Ender-5/CrealityV427/Configuration.h @@ -1354,19 +1354,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/Creality/Ender-6/Configuration.h b/config/examples/Creality/Ender-6/Configuration.h index 5653241b7a..d0f406f252 100644 --- a/config/examples/Creality/Ender-6/Configuration.h +++ b/config/examples/Creality/Ender-6/Configuration.h @@ -1356,19 +1356,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/Dagoma/Disco Ultimate/Configuration.h b/config/examples/Dagoma/Disco Ultimate/Configuration.h index 34d4fd6f53..c99e8f9008 100644 --- a/config/examples/Dagoma/Disco Ultimate/Configuration.h +++ b/config/examples/Dagoma/Disco Ultimate/Configuration.h @@ -1353,19 +1353,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/Daycom/3DP-100/Configuration.h b/config/examples/Daycom/3DP-100/Configuration.h index f7be9e864b..639add1f46 100644 --- a/config/examples/Daycom/3DP-100/Configuration.h +++ b/config/examples/Daycom/3DP-100/Configuration.h @@ -1357,19 +1357,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/EXP3D/Imprimante multifonction/Configuration.h b/config/examples/EXP3D/Imprimante multifonction/Configuration.h index 44633d155e..b70528513d 100644 --- a/config/examples/EXP3D/Imprimante multifonction/Configuration.h +++ b/config/examples/EXP3D/Imprimante multifonction/Configuration.h @@ -1353,19 +1353,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/EasyThreeD/ET4000PLUS/Configuration.h b/config/examples/EasyThreeD/ET4000PLUS/Configuration.h index 4662f0f0ed..8e2df1b0a3 100644 --- a/config/examples/EasyThreeD/ET4000PLUS/Configuration.h +++ b/config/examples/EasyThreeD/ET4000PLUS/Configuration.h @@ -1353,19 +1353,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -#define Z_MIN_PROBE_PIN Z_MAX_PIN // Pin 32 is the RAMPS default +#define Z_MIN_PROBE_PIN Z_MAX_PIN /** * Probe Type diff --git a/config/examples/Einstart-S/Configuration.h b/config/examples/Einstart-S/Configuration.h index 1e324e3309..fed40b9010 100644 --- a/config/examples/Einstart-S/Configuration.h +++ b/config/examples/Einstart-S/Configuration.h @@ -1358,19 +1358,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/Elegoo/Neptune 2/Configuration.h b/config/examples/Elegoo/Neptune 2/Configuration.h index 61192b9ac9..04ac546240 100644 --- a/config/examples/Elegoo/Neptune 2/Configuration.h +++ b/config/examples/Elegoo/Neptune 2/Configuration.h @@ -1409,17 +1409,15 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ #define Z_MIN_PROBE_PIN Z_MAX_PIN // Z-MAX PIN FOR BOARD diff --git a/config/examples/Eryone/Thinker SE/Configuration.h b/config/examples/Eryone/Thinker SE/Configuration.h index 6b0a37e365..3d2ef9eab0 100644 --- a/config/examples/Eryone/Thinker SE/Configuration.h +++ b/config/examples/Eryone/Thinker SE/Configuration.h @@ -1380,19 +1380,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/Eryone/Thinker V2/Configuration.h b/config/examples/Eryone/Thinker V2/Configuration.h index 6cc429d7a2..41ff9ff890 100644 --- a/config/examples/Eryone/Thinker V2/Configuration.h +++ b/config/examples/Eryone/Thinker V2/Configuration.h @@ -1381,19 +1381,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/FYSETC/AIO_II/Configuration.h b/config/examples/FYSETC/AIO_II/Configuration.h index 7be8f93c33..578c1a3810 100644 --- a/config/examples/FYSETC/AIO_II/Configuration.h +++ b/config/examples/FYSETC/AIO_II/Configuration.h @@ -1354,19 +1354,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/FYSETC/F6_13/Configuration.h b/config/examples/FYSETC/F6_13/Configuration.h index 2e8f83fcef..efeef90b9f 100644 --- a/config/examples/FYSETC/F6_13/Configuration.h +++ b/config/examples/FYSETC/F6_13/Configuration.h @@ -1355,19 +1355,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/FYSETC/S6/Configuration.h b/config/examples/FYSETC/S6/Configuration.h index eac78fe864..4e84de9c07 100644 --- a/config/examples/FYSETC/S6/Configuration.h +++ b/config/examples/FYSETC/S6/Configuration.h @@ -1353,19 +1353,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/Felix/DUAL/Configuration.h b/config/examples/Felix/DUAL/Configuration.h index 96546d5372..b3993fadd4 100644 --- a/config/examples/Felix/DUAL/Configuration.h +++ b/config/examples/Felix/DUAL/Configuration.h @@ -1354,19 +1354,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/Felix/Single/Configuration.h b/config/examples/Felix/Single/Configuration.h index 0bc941dad5..192bc28b1b 100644 --- a/config/examples/Felix/Single/Configuration.h +++ b/config/examples/Felix/Single/Configuration.h @@ -1354,19 +1354,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/FlashForge/Creator 2X/Configuration.h b/config/examples/FlashForge/Creator 2X/Configuration.h index a65f6f2ba9..895d55b4cb 100644 --- a/config/examples/FlashForge/Creator 2X/Configuration.h +++ b/config/examples/FlashForge/Creator 2X/Configuration.h @@ -1353,19 +1353,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/FlashForge/CreatorPro/Configuration.h b/config/examples/FlashForge/CreatorPro/Configuration.h index 925f09a9d6..78f14c3ee0 100644 --- a/config/examples/FlashForge/CreatorPro/Configuration.h +++ b/config/examples/FlashForge/CreatorPro/Configuration.h @@ -1353,19 +1353,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/FlyingBear/P902/Configuration.h b/config/examples/FlyingBear/P902/Configuration.h index c3fc37a506..61848ded37 100644 --- a/config/examples/FlyingBear/P902/Configuration.h +++ b/config/examples/FlyingBear/P902/Configuration.h @@ -1353,19 +1353,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/FlyingBear/P905H/Configuration.h b/config/examples/FlyingBear/P905H/Configuration.h index ab2f2a662f..d0c3407d4f 100644 --- a/config/examples/FlyingBear/P905H/Configuration.h +++ b/config/examples/FlyingBear/P905H/Configuration.h @@ -1357,19 +1357,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/FoamCutter/generic/Configuration.h b/config/examples/FoamCutter/generic/Configuration.h index 0c7793e922..5fa68e25b5 100644 --- a/config/examples/FoamCutter/generic/Configuration.h +++ b/config/examples/FoamCutter/generic/Configuration.h @@ -1353,19 +1353,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/FoamCutter/rcKeith/Configuration.h b/config/examples/FoamCutter/rcKeith/Configuration.h index e4d194841d..dd2f6117e9 100644 --- a/config/examples/FoamCutter/rcKeith/Configuration.h +++ b/config/examples/FoamCutter/rcKeith/Configuration.h @@ -1353,19 +1353,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/FolgerTech/FT-5 R2/Configuration.h b/config/examples/FolgerTech/FT-5 R2/Configuration.h index 98d15c3d79..870b686fcb 100644 --- a/config/examples/FolgerTech/FT-5 R2/Configuration.h +++ b/config/examples/FolgerTech/FT-5 R2/Configuration.h @@ -1353,19 +1353,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/FolgerTech/i3-2020/Configuration.h b/config/examples/FolgerTech/i3-2020/Configuration.h index d11db31014..4a081e999b 100644 --- a/config/examples/FolgerTech/i3-2020/Configuration.h +++ b/config/examples/FolgerTech/i3-2020/Configuration.h @@ -1355,19 +1355,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/Formbot/Raptor/Configuration.h b/config/examples/Formbot/Raptor/Configuration.h index daa7bb4630..99bc0609f7 100644 --- a/config/examples/Formbot/Raptor/Configuration.h +++ b/config/examples/Formbot/Raptor/Configuration.h @@ -1444,19 +1444,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/Formbot/T_Rex_2+/Configuration.h b/config/examples/Formbot/T_Rex_2+/Configuration.h index f2f76f8463..4d34428ae8 100644 --- a/config/examples/Formbot/T_Rex_2+/Configuration.h +++ b/config/examples/Formbot/T_Rex_2+/Configuration.h @@ -1354,19 +1354,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/Formbot/T_Rex_3/Configuration.h b/config/examples/Formbot/T_Rex_3/Configuration.h index 163846146d..94bccce4c7 100644 --- a/config/examples/Formbot/T_Rex_3/Configuration.h +++ b/config/examples/Formbot/T_Rex_3/Configuration.h @@ -1360,19 +1360,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/Geeetech/A10/Configuration.h b/config/examples/Geeetech/A10/Configuration.h index dca7d29121..874f251eef 100644 --- a/config/examples/Geeetech/A10/Configuration.h +++ b/config/examples/Geeetech/A10/Configuration.h @@ -1353,19 +1353,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/Geeetech/A10D/Configuration.h b/config/examples/Geeetech/A10D/Configuration.h index f81ed419c6..f0fbf10c1b 100644 --- a/config/examples/Geeetech/A10D/Configuration.h +++ b/config/examples/Geeetech/A10D/Configuration.h @@ -1352,19 +1352,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/Geeetech/A10M/Stock LCD/Configuration.h b/config/examples/Geeetech/A10M/Stock LCD/Configuration.h index ca38790b1d..27e4aa3b1f 100644 --- a/config/examples/Geeetech/A10M/Stock LCD/Configuration.h +++ b/config/examples/Geeetech/A10M/Stock LCD/Configuration.h @@ -1353,19 +1353,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/Geeetech/A10M/YHCB2004_V4.1/Configuration.h b/config/examples/Geeetech/A10M/YHCB2004_V4.1/Configuration.h index bc33e91dde..47389128f3 100644 --- a/config/examples/Geeetech/A10M/YHCB2004_V4.1/Configuration.h +++ b/config/examples/Geeetech/A10M/YHCB2004_V4.1/Configuration.h @@ -1353,19 +1353,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/Geeetech/A10PRO/Configuration.h b/config/examples/Geeetech/A10PRO/Configuration.h index 35c1f9e3b9..ca8b9de661 100644 --- a/config/examples/Geeetech/A10PRO/Configuration.h +++ b/config/examples/Geeetech/A10PRO/Configuration.h @@ -1353,19 +1353,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/Geeetech/A10T/Stock LCD/Configuration.h b/config/examples/Geeetech/A10T/Stock LCD/Configuration.h index b6403e0f32..6493ad2012 100644 --- a/config/examples/Geeetech/A10T/Stock LCD/Configuration.h +++ b/config/examples/Geeetech/A10T/Stock LCD/Configuration.h @@ -1353,19 +1353,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/Geeetech/A10T/YHCB2004_V4.1/Configuration.h b/config/examples/Geeetech/A10T/YHCB2004_V4.1/Configuration.h index d42e035663..4acf1b6b4a 100644 --- a/config/examples/Geeetech/A10T/YHCB2004_V4.1/Configuration.h +++ b/config/examples/Geeetech/A10T/YHCB2004_V4.1/Configuration.h @@ -1353,19 +1353,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/Geeetech/A20/Configuration.h b/config/examples/Geeetech/A20/Configuration.h index eda23155b7..bf8f9853f9 100644 --- a/config/examples/Geeetech/A20/Configuration.h +++ b/config/examples/Geeetech/A20/Configuration.h @@ -1353,19 +1353,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/Geeetech/A20M/Configuration.h b/config/examples/Geeetech/A20M/Configuration.h index 06fa1a963c..cc1bb3bff6 100644 --- a/config/examples/Geeetech/A20M/Configuration.h +++ b/config/examples/Geeetech/A20M/Configuration.h @@ -1353,19 +1353,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/Geeetech/A20T/Configuration.h b/config/examples/Geeetech/A20T/Configuration.h index b9a61b76aa..f8c8ddd825 100644 --- a/config/examples/Geeetech/A20T/Configuration.h +++ b/config/examples/Geeetech/A20T/Configuration.h @@ -1353,19 +1353,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/Geeetech/A30/Configuration.h b/config/examples/Geeetech/A30/Configuration.h index 389a256132..97fe9a94e4 100644 --- a/config/examples/Geeetech/A30/Configuration.h +++ b/config/examples/Geeetech/A30/Configuration.h @@ -1351,19 +1351,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/Geeetech/A30M/Configuration.h b/config/examples/Geeetech/A30M/Configuration.h index 1ab7e0796e..cace46ab8b 100644 --- a/config/examples/Geeetech/A30M/Configuration.h +++ b/config/examples/Geeetech/A30M/Configuration.h @@ -1351,19 +1351,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/Geeetech/A30T/Configuration.h b/config/examples/Geeetech/A30T/Configuration.h index 03fa86d570..820129e0c0 100644 --- a/config/examples/Geeetech/A30T/Configuration.h +++ b/config/examples/Geeetech/A30T/Configuration.h @@ -1351,19 +1351,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/Geeetech/D200/Configuration.h b/config/examples/Geeetech/D200/Configuration.h index ddab087233..9dd8d8881d 100644 --- a/config/examples/Geeetech/D200/Configuration.h +++ b/config/examples/Geeetech/D200/Configuration.h @@ -1351,19 +1351,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/Geeetech/Duplicator5/Configuration.h b/config/examples/Geeetech/Duplicator5/Configuration.h index a28e584b49..03dad5eb42 100644 --- a/config/examples/Geeetech/Duplicator5/Configuration.h +++ b/config/examples/Geeetech/Duplicator5/Configuration.h @@ -1353,19 +1353,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/Geeetech/E180/Configuration.h b/config/examples/Geeetech/E180/Configuration.h index 19137c6763..cde35912fb 100644 --- a/config/examples/Geeetech/E180/Configuration.h +++ b/config/examples/Geeetech/E180/Configuration.h @@ -1352,19 +1352,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/Geeetech/GT2560/Configuration.h b/config/examples/Geeetech/GT2560/Configuration.h index 228017b6f5..e0c986ec55 100644 --- a/config/examples/Geeetech/GT2560/Configuration.h +++ b/config/examples/Geeetech/GT2560/Configuration.h @@ -1358,19 +1358,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h b/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h index 913481f95e..6d2b4232b7 100644 --- a/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h +++ b/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h @@ -1353,19 +1353,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/Geeetech/M201/Configuration.h b/config/examples/Geeetech/M201/Configuration.h index eb4b45cc23..820d45ba4a 100644 --- a/config/examples/Geeetech/M201/Configuration.h +++ b/config/examples/Geeetech/M201/Configuration.h @@ -1351,19 +1351,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/Geeetech/MeCreator2/Configuration.h b/config/examples/Geeetech/MeCreator2/Configuration.h index 9ca6317743..9234b1f662 100644 --- a/config/examples/Geeetech/MeCreator2/Configuration.h +++ b/config/examples/Geeetech/MeCreator2/Configuration.h @@ -1352,19 +1352,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/Geeetech/Me_creator/Configuration.h b/config/examples/Geeetech/Me_creator/Configuration.h index 3179e3dc99..6517406c02 100644 --- a/config/examples/Geeetech/Me_creator/Configuration.h +++ b/config/examples/Geeetech/Me_creator/Configuration.h @@ -1353,19 +1353,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/Geeetech/Me_ducer/Configuration.h b/config/examples/Geeetech/Me_ducer/Configuration.h index 2ea1f5494f..5dfa5bdfa8 100644 --- a/config/examples/Geeetech/Me_ducer/Configuration.h +++ b/config/examples/Geeetech/Me_ducer/Configuration.h @@ -1353,19 +1353,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/Geeetech/PI3A PRO/Configuration.h b/config/examples/Geeetech/PI3A PRO/Configuration.h index 6b52fef569..582595fcdf 100644 --- a/config/examples/Geeetech/PI3A PRO/Configuration.h +++ b/config/examples/Geeetech/PI3A PRO/Configuration.h @@ -1363,19 +1363,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h b/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h index fc77fc6ba7..0640246f27 100644 --- a/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h +++ b/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h @@ -1363,19 +1363,16 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default #define Z_MIN_PROBE_PIN 32 /** diff --git a/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h b/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h index 493f38414a..f0454162f0 100644 --- a/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h +++ b/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h @@ -1363,19 +1363,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/Geeetech/Prusa i3 Pro C/Configuration.h b/config/examples/Geeetech/Prusa i3 Pro C/Configuration.h index af09bba77a..7f358178a6 100644 --- a/config/examples/Geeetech/Prusa i3 Pro C/Configuration.h +++ b/config/examples/Geeetech/Prusa i3 Pro C/Configuration.h @@ -1353,19 +1353,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/Geeetech/Prusa i3 Pro W/Configuration.h b/config/examples/Geeetech/Prusa i3 Pro W/Configuration.h index 5a01da01a6..e8c19bf951 100644 --- a/config/examples/Geeetech/Prusa i3 Pro W/Configuration.h +++ b/config/examples/Geeetech/Prusa i3 Pro W/Configuration.h @@ -1353,19 +1353,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/HMS434/Configuration.h b/config/examples/HMS434/Configuration.h index c04f2dd70f..915dfe4eeb 100644 --- a/config/examples/HMS434/Configuration.h +++ b/config/examples/HMS434/Configuration.h @@ -1351,19 +1351,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/Infitary/i3-M508/Configuration.h b/config/examples/Infitary/i3-M508/Configuration.h index 45c776e569..9c6df9cf78 100644 --- a/config/examples/Infitary/i3-M508/Configuration.h +++ b/config/examples/Infitary/i3-M508/Configuration.h @@ -1353,19 +1353,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/Intamsys/FunmatHT 4988/Configuration.h b/config/examples/Intamsys/FunmatHT 4988/Configuration.h index 2d5c8dec48..e0fdddffdf 100644 --- a/config/examples/Intamsys/FunmatHT 4988/Configuration.h +++ b/config/examples/Intamsys/FunmatHT 4988/Configuration.h @@ -1353,19 +1353,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/JGAurora/A1/Configuration.h b/config/examples/JGAurora/A1/Configuration.h index 25ce4d648f..3db75a062f 100644 --- a/config/examples/JGAurora/A1/Configuration.h +++ b/config/examples/JGAurora/A1/Configuration.h @@ -1357,19 +1357,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/JGAurora/A3/Configuration.h b/config/examples/JGAurora/A3/Configuration.h index 8a231505e7..034d758fc4 100644 --- a/config/examples/JGAurora/A3/Configuration.h +++ b/config/examples/JGAurora/A3/Configuration.h @@ -1353,19 +1353,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/JGAurora/A5/Configuration.h b/config/examples/JGAurora/A5/Configuration.h index 5407068007..a21b97c173 100644 --- a/config/examples/JGAurora/A5/Configuration.h +++ b/config/examples/JGAurora/A5/Configuration.h @@ -1361,19 +1361,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/JGAurora/A5S/Configuration.h b/config/examples/JGAurora/A5S/Configuration.h index 354d698387..e8c1ff7992 100644 --- a/config/examples/JGAurora/A5S/Configuration.h +++ b/config/examples/JGAurora/A5S/Configuration.h @@ -1357,19 +1357,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/JGAurora/Magic/Configuration.h b/config/examples/JGAurora/Magic/Configuration.h index c163d6014c..4371987bd3 100644 --- a/config/examples/JGAurora/Magic/Configuration.h +++ b/config/examples/JGAurora/Magic/Configuration.h @@ -1353,19 +1353,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/Kingroon/KP3/Configuration.h b/config/examples/Kingroon/KP3/Configuration.h index d779f86e3c..6005f80869 100644 --- a/config/examples/Kingroon/KP3/Configuration.h +++ b/config/examples/Kingroon/KP3/Configuration.h @@ -1352,19 +1352,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/Kingroon/KP3S/Configuration.h b/config/examples/Kingroon/KP3S/Configuration.h index c7a34b084c..b2322660a8 100644 --- a/config/examples/Kingroon/KP3S/Configuration.h +++ b/config/examples/Kingroon/KP3S/Configuration.h @@ -1353,19 +1353,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/Kingroon/KP5L/Configuration.h b/config/examples/Kingroon/KP5L/Configuration.h index be24f5d543..426d972d24 100644 --- a/config/examples/Kingroon/KP5L/Configuration.h +++ b/config/examples/Kingroon/KP5L/Configuration.h @@ -1353,19 +1353,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -#define Z_MIN_PROBE_PIN PC4 // Pin 32 is the RAMPS default +#define Z_MIN_PROBE_PIN PC4 /** * Probe Type diff --git a/config/examples/Labists/ET4/Configuration.h b/config/examples/Labists/ET4/Configuration.h index b1c064736c..0d06b2b868 100644 --- a/config/examples/Labists/ET4/Configuration.h +++ b/config/examples/Labists/ET4/Configuration.h @@ -1359,19 +1359,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/Longer/LK5/Configuration.h b/config/examples/Longer/LK5/Configuration.h index 848241a673..9e81b210de 100644 --- a/config/examples/Longer/LK5/Configuration.h +++ b/config/examples/Longer/LK5/Configuration.h @@ -1354,19 +1354,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/LulzBot/Mini2/Teensy/Configuration.h b/config/examples/LulzBot/Mini2/Teensy/Configuration.h index d6a11910ed..141b4dec32 100644 --- a/config/examples/LulzBot/Mini2/Teensy/Configuration.h +++ b/config/examples/LulzBot/Mini2/Teensy/Configuration.h @@ -1373,19 +1373,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/LulzBot/TAZ4/Configuration.h b/config/examples/LulzBot/TAZ4/Configuration.h index a75a30e4b5..bdc94521e7 100644 --- a/config/examples/LulzBot/TAZ4/Configuration.h +++ b/config/examples/LulzBot/TAZ4/Configuration.h @@ -1364,19 +1364,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/MBot/Cube/Configuration.h b/config/examples/MBot/Cube/Configuration.h index 27cc498597..74581b6fda 100644 --- a/config/examples/MBot/Cube/Configuration.h +++ b/config/examples/MBot/Cube/Configuration.h @@ -1353,19 +1353,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/MakerFarm/Pegasus 12/Configuration.h b/config/examples/MakerFarm/Pegasus 12/Configuration.h index e768419695..2e32de3a6b 100644 --- a/config/examples/MakerFarm/Pegasus 12/Configuration.h +++ b/config/examples/MakerFarm/Pegasus 12/Configuration.h @@ -1359,19 +1359,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/MakerParts/Configuration.h b/config/examples/MakerParts/Configuration.h index e6826ed479..07d6e39c3d 100644 --- a/config/examples/MakerParts/Configuration.h +++ b/config/examples/MakerParts/Configuration.h @@ -1353,19 +1353,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/MakerTech3D/Proforge2sDual/Configuration.h b/config/examples/MakerTech3D/Proforge2sDual/Configuration.h index cb2acc5819..dfce1776d0 100644 --- a/config/examples/MakerTech3D/Proforge2sDual/Configuration.h +++ b/config/examples/MakerTech3D/Proforge2sDual/Configuration.h @@ -1356,19 +1356,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/Malyan/M150/Configuration.h b/config/examples/Malyan/M150/Configuration.h index 32a9e93de7..01b34270c5 100644 --- a/config/examples/Malyan/M150/Configuration.h +++ b/config/examples/Malyan/M150/Configuration.h @@ -1373,19 +1373,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/Malyan/M180/Configuration.h b/config/examples/Malyan/M180/Configuration.h index 051baf6c17..0d72c78f96 100644 --- a/config/examples/Malyan/M180/Configuration.h +++ b/config/examples/Malyan/M180/Configuration.h @@ -1354,19 +1354,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/Malyan/M200/Configuration.h b/config/examples/Malyan/M200/Configuration.h index 3db1854dd9..a3e8d31e85 100644 --- a/config/examples/Malyan/M200/Configuration.h +++ b/config/examples/Malyan/M200/Configuration.h @@ -1359,19 +1359,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/Micromake/C1/basic/Configuration.h b/config/examples/Micromake/C1/basic/Configuration.h index 9652fe92bd..a00818d918 100644 --- a/config/examples/Micromake/C1/basic/Configuration.h +++ b/config/examples/Micromake/C1/basic/Configuration.h @@ -1357,19 +1357,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/Micromake/C1/enhanced/Configuration.h b/config/examples/Micromake/C1/enhanced/Configuration.h index b7b33f1fb9..4d0560970b 100644 --- a/config/examples/Micromake/C1/enhanced/Configuration.h +++ b/config/examples/Micromake/C1/enhanced/Configuration.h @@ -1357,19 +1357,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/Mks/Robin/Configuration.h b/config/examples/Mks/Robin/Configuration.h index dd6b4ea4f1..8cbd1be540 100644 --- a/config/examples/Mks/Robin/Configuration.h +++ b/config/examples/Mks/Robin/Configuration.h @@ -1353,19 +1353,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/Mks/Robin_Lite3/Configuration.h b/config/examples/Mks/Robin_Lite3/Configuration.h index 2b0f21ed88..fab3ec1dcb 100644 --- a/config/examples/Mks/Robin_Lite3/Configuration.h +++ b/config/examples/Mks/Robin_Lite3/Configuration.h @@ -1361,19 +1361,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/Mks/Robin_Pro/Configuration.h b/config/examples/Mks/Robin_Pro/Configuration.h index 654d5b9ace..83faf9cd54 100644 --- a/config/examples/Mks/Robin_Pro/Configuration.h +++ b/config/examples/Mks/Robin_Pro/Configuration.h @@ -1355,19 +1355,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/Mks/Sbase/Configuration.h b/config/examples/Mks/Sbase/Configuration.h index c89cb02393..17d7758e69 100644 --- a/config/examples/Mks/Sbase/Configuration.h +++ b/config/examples/Mks/Sbase/Configuration.h @@ -1353,19 +1353,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/Modix/Big60/Configuration.h b/config/examples/Modix/Big60/Configuration.h index 6262279024..3572cbc95c 100644 --- a/config/examples/Modix/Big60/Configuration.h +++ b/config/examples/Modix/Big60/Configuration.h @@ -1353,19 +1353,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/Nextion/Configuration.h b/config/examples/Nextion/Configuration.h index d230b9ec83..ca28be37c5 100644 --- a/config/examples/Nextion/Configuration.h +++ b/config/examples/Nextion/Configuration.h @@ -1353,19 +1353,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/Opulo/Lumen_REV3/Configuration.h b/config/examples/Opulo/Lumen_REV3/Configuration.h index e67fb56231..b6313a0adb 100644 --- a/config/examples/Opulo/Lumen_REV3/Configuration.h +++ b/config/examples/Opulo/Lumen_REV3/Configuration.h @@ -1353,19 +1353,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/Opulo/Lumen_REV4/Configuration.h b/config/examples/Opulo/Lumen_REV4/Configuration.h index 9b2c6a23e7..982dd6d302 100644 --- a/config/examples/Opulo/Lumen_REV4/Configuration.h +++ b/config/examples/Opulo/Lumen_REV4/Configuration.h @@ -1353,19 +1353,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/Ortur 4/Configuration.h b/config/examples/Ortur 4/Configuration.h index 65feb98bc8..71c3978f5d 100644 --- a/config/examples/Ortur 4/Configuration.h +++ b/config/examples/Ortur 4/Configuration.h @@ -1353,19 +1353,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/Polargraph/Configuration.h b/config/examples/Polargraph/Configuration.h index 26c2bf34ca..c7d2b01472 100644 --- a/config/examples/Polargraph/Configuration.h +++ b/config/examples/Polargraph/Configuration.h @@ -1357,19 +1357,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/Printrbot/PrintrboardG2/Configuration.h b/config/examples/Printrbot/PrintrboardG2/Configuration.h index 8a6079428b..c5240c271b 100644 --- a/config/examples/Printrbot/PrintrboardG2/Configuration.h +++ b/config/examples/Printrbot/PrintrboardG2/Configuration.h @@ -1355,19 +1355,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/Printrbot/Simple Metal RevD/Configuration.h b/config/examples/Printrbot/Simple Metal RevD/Configuration.h index 4e6acd71c0..74f362774a 100644 --- a/config/examples/Printrbot/Simple Metal RevD/Configuration.h +++ b/config/examples/Printrbot/Simple Metal RevD/Configuration.h @@ -1353,19 +1353,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/Prusa/MK3/Configuration.h b/config/examples/Prusa/MK3/Configuration.h index d89c540e45..7d23e4a8f9 100644 --- a/config/examples/Prusa/MK3/Configuration.h +++ b/config/examples/Prusa/MK3/Configuration.h @@ -1383,19 +1383,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/Prusa/MK3S-BigTreeTech-BTT002/Configuration.h b/config/examples/Prusa/MK3S-BigTreeTech-BTT002/Configuration.h index db1d683a34..70c9f3d240 100644 --- a/config/examples/Prusa/MK3S-BigTreeTech-BTT002/Configuration.h +++ b/config/examples/Prusa/MK3S-BigTreeTech-BTT002/Configuration.h @@ -1373,19 +1373,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/Qidi/Qidi 1/Configuration.h b/config/examples/Qidi/Qidi 1/Configuration.h index c6d1115d75..b1733fe428 100644 --- a/config/examples/Qidi/Qidi 1/Configuration.h +++ b/config/examples/Qidi/Qidi 1/Configuration.h @@ -1354,19 +1354,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/Raiscube/A8r/Configuration.h b/config/examples/Raiscube/A8r/Configuration.h index 97732fc1c5..64589bce22 100644 --- a/config/examples/Raiscube/A8r/Configuration.h +++ b/config/examples/Raiscube/A8r/Configuration.h @@ -1371,19 +1371,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/RapideLite/RL200/Configuration.h b/config/examples/RapideLite/RL200/Configuration.h index 3ef4aba3c2..9e26ac88c0 100644 --- a/config/examples/RapideLite/RL200/Configuration.h +++ b/config/examples/RapideLite/RL200/Configuration.h @@ -1353,19 +1353,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/Renkforce/RF100/Configuration.h b/config/examples/Renkforce/RF100/Configuration.h index 8fd1703204..3435ec203f 100644 --- a/config/examples/Renkforce/RF100/Configuration.h +++ b/config/examples/Renkforce/RF100/Configuration.h @@ -1358,19 +1358,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/Renkforce/RF100XL/Configuration.h b/config/examples/Renkforce/RF100XL/Configuration.h index 7faffb5004..cc8232462d 100644 --- a/config/examples/Renkforce/RF100XL/Configuration.h +++ b/config/examples/Renkforce/RF100XL/Configuration.h @@ -1358,19 +1358,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/Renkforce/RF100v2/Configuration.h b/config/examples/Renkforce/RF100v2/Configuration.h index bb5003e77f..1d56bb08f8 100644 --- a/config/examples/Renkforce/RF100v2/Configuration.h +++ b/config/examples/Renkforce/RF100v2/Configuration.h @@ -1358,19 +1358,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/RepRapPro/Huxley/Configuration.h b/config/examples/RepRapPro/Huxley/Configuration.h index 4de4570b8e..1ba6d1edab 100644 --- a/config/examples/RepRapPro/Huxley/Configuration.h +++ b/config/examples/RepRapPro/Huxley/Configuration.h @@ -1394,19 +1394,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/RepRapWorld/Megatronics/Configuration.h b/config/examples/RepRapWorld/Megatronics/Configuration.h index 377d584c7e..0c71e7a8f4 100644 --- a/config/examples/RepRapWorld/Megatronics/Configuration.h +++ b/config/examples/RepRapWorld/Megatronics/Configuration.h @@ -1353,19 +1353,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/RepRapWorld/Minitronics20/CNC/Configuration.h b/config/examples/RepRapWorld/Minitronics20/CNC/Configuration.h index 1fdd9c5144..65d017d041 100644 --- a/config/examples/RepRapWorld/Minitronics20/CNC/Configuration.h +++ b/config/examples/RepRapWorld/Minitronics20/CNC/Configuration.h @@ -1353,19 +1353,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/RigidBot/Configuration.h b/config/examples/RigidBot/Configuration.h index db09f77a30..aca0a6fcdb 100644 --- a/config/examples/RigidBot/Configuration.h +++ b/config/examples/RigidBot/Configuration.h @@ -1367,19 +1367,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/Robo3D/R1+/Configuration.h b/config/examples/Robo3D/R1+/Configuration.h index 26686eb75f..356eb411db 100644 --- a/config/examples/Robo3D/R1+/Configuration.h +++ b/config/examples/Robo3D/R1+/Configuration.h @@ -1353,19 +1353,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/SCARA/MP_SCARA/Configuration.h b/config/examples/SCARA/MP_SCARA/Configuration.h index ef3cf0ecf5..8f8e59d851 100644 --- a/config/examples/SCARA/MP_SCARA/Configuration.h +++ b/config/examples/SCARA/MP_SCARA/Configuration.h @@ -1355,19 +1355,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/SCARA/Morgan/Configuration.h b/config/examples/SCARA/Morgan/Configuration.h index a20cddfe5d..9b96abfb3a 100644 --- a/config/examples/SCARA/Morgan/Configuration.h +++ b/config/examples/SCARA/Morgan/Configuration.h @@ -1354,19 +1354,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/STM32/Black_STM32F407VET6/Configuration.h b/config/examples/STM32/Black_STM32F407VET6/Configuration.h index 8906384364..723c08ca7d 100644 --- a/config/examples/STM32/Black_STM32F407VET6/Configuration.h +++ b/config/examples/STM32/Black_STM32F407VET6/Configuration.h @@ -1353,19 +1353,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/STM32/STM32F103RE/Configuration.h b/config/examples/STM32/STM32F103RE/Configuration.h index 617622c48c..ca347e7760 100644 --- a/config/examples/STM32/STM32F103RE/Configuration.h +++ b/config/examples/STM32/STM32F103RE/Configuration.h @@ -1353,19 +1353,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/Sanguinololu/Configuration.h b/config/examples/Sanguinololu/Configuration.h index b221697c67..668e2c019c 100644 --- a/config/examples/Sanguinololu/Configuration.h +++ b/config/examples/Sanguinololu/Configuration.h @@ -1384,19 +1384,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/Simax/Mi-M200/Configuration.h b/config/examples/Simax/Mi-M200/Configuration.h index 7cd20e75bd..a3cac9a918 100644 --- a/config/examples/Simax/Mi-M200/Configuration.h +++ b/config/examples/Simax/Mi-M200/Configuration.h @@ -1354,19 +1354,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/Simulator/Configuration.h b/config/examples/Simulator/Configuration.h index c6b31e4a3e..ad694617cf 100644 --- a/config/examples/Simulator/Configuration.h +++ b/config/examples/Simulator/Configuration.h @@ -1369,19 +1369,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/Sovol/SV-01/BigTreeTech SKR E3 Turbo/Configuration.h b/config/examples/Sovol/SV-01/BigTreeTech SKR E3 Turbo/Configuration.h index e7ea70bc3b..56fd9e6a50 100644 --- a/config/examples/Sovol/SV-01/BigTreeTech SKR E3 Turbo/Configuration.h +++ b/config/examples/Sovol/SV-01/BigTreeTech SKR E3 Turbo/Configuration.h @@ -1359,19 +1359,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/Sovol/SV-01/BigTreeTech SKR Mini E3 2.0/Configuration.h b/config/examples/Sovol/SV-01/BigTreeTech SKR Mini E3 2.0/Configuration.h index ee75eddec0..0b3fa8cf42 100644 --- a/config/examples/Sovol/SV-01/BigTreeTech SKR Mini E3 2.0/Configuration.h +++ b/config/examples/Sovol/SV-01/BigTreeTech SKR Mini E3 2.0/Configuration.h @@ -1357,19 +1357,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/Sovol/SV-01/BigTreeTech SKR Mini E3 3.0/Configuration.h b/config/examples/Sovol/SV-01/BigTreeTech SKR Mini E3 3.0/Configuration.h index 9e86f0384a..f3c4b4a7dc 100644 --- a/config/examples/Sovol/SV-01/BigTreeTech SKR Mini E3 3.0/Configuration.h +++ b/config/examples/Sovol/SV-01/BigTreeTech SKR Mini E3 3.0/Configuration.h @@ -1357,19 +1357,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/Sovol/SV-01/CrealityV22/Configuration.h b/config/examples/Sovol/SV-01/CrealityV22/Configuration.h index 41dcb2b62a..bb3c34544e 100644 --- a/config/examples/Sovol/SV-01/CrealityV22/Configuration.h +++ b/config/examples/Sovol/SV-01/CrealityV22/Configuration.h @@ -1356,19 +1356,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/Sovol/SV-01/CrealityV221/Configuration.h b/config/examples/Sovol/SV-01/CrealityV221/Configuration.h index 4a5f89c758..629efbcb39 100644 --- a/config/examples/Sovol/SV-01/CrealityV221/Configuration.h +++ b/config/examples/Sovol/SV-01/CrealityV221/Configuration.h @@ -1356,19 +1356,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/Sovol/SV-02/Configuration.h b/config/examples/Sovol/SV-02/Configuration.h index 0452268834..327ebe3e29 100644 --- a/config/examples/Sovol/SV-02/Configuration.h +++ b/config/examples/Sovol/SV-02/Configuration.h @@ -1356,19 +1356,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/Sovol/SV-03/Configuration.h b/config/examples/Sovol/SV-03/Configuration.h index 20e45fc227..8fbc9fc629 100644 --- a/config/examples/Sovol/SV-03/Configuration.h +++ b/config/examples/Sovol/SV-03/Configuration.h @@ -1353,19 +1353,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/Sunlu/S8/Configuration.h b/config/examples/Sunlu/S8/Configuration.h index e6ef39b9a0..7a6553d4b1 100644 --- a/config/examples/Sunlu/S8/Configuration.h +++ b/config/examples/Sunlu/S8/Configuration.h @@ -1353,19 +1353,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/TPARA/AXEL_TPARA/Configuration.h b/config/examples/TPARA/AXEL_TPARA/Configuration.h index 1e6afbee42..57b23c79d9 100644 --- a/config/examples/TPARA/AXEL_TPARA/Configuration.h +++ b/config/examples/TPARA/AXEL_TPARA/Configuration.h @@ -1357,19 +1357,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/Tevo/Michelangelo/Configuration.h b/config/examples/Tevo/Michelangelo/Configuration.h index 0ba8e012c5..1d87eded77 100644 --- a/config/examples/Tevo/Michelangelo/Configuration.h +++ b/config/examples/Tevo/Michelangelo/Configuration.h @@ -1354,19 +1354,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/Tevo/Nereus/Configuration.h b/config/examples/Tevo/Nereus/Configuration.h index ad99f70163..abe547665b 100644 --- a/config/examples/Tevo/Nereus/Configuration.h +++ b/config/examples/Tevo/Nereus/Configuration.h @@ -1354,19 +1354,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/Tevo/Tarantula Pro/Configuration.h b/config/examples/Tevo/Tarantula Pro/Configuration.h index 2953357c98..42a1b0406b 100644 --- a/config/examples/Tevo/Tarantula Pro/Configuration.h +++ b/config/examples/Tevo/Tarantula Pro/Configuration.h @@ -1354,19 +1354,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration.h b/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration.h index 7ebf2a1de8..4eaa967f43 100644 --- a/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration.h +++ b/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration.h @@ -1354,19 +1354,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration.h b/config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration.h index 9be7a58be0..39fee6368e 100644 --- a/config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration.h +++ b/config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration.h @@ -1354,19 +1354,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/Tinkerine/Ditto Pro/RAMPS 1.4/Configuration.h b/config/examples/Tinkerine/Ditto Pro/RAMPS 1.4/Configuration.h index 47d0179c84..9c5be9df73 100644 --- a/config/examples/Tinkerine/Ditto Pro/RAMPS 1.4/Configuration.h +++ b/config/examples/Tinkerine/Ditto Pro/RAMPS 1.4/Configuration.h @@ -1353,19 +1353,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/TinyBoy2/Configuration.h b/config/examples/TinyBoy2/Configuration.h index 629bdfdf7a..75a82faac2 100644 --- a/config/examples/TinyBoy2/Configuration.h +++ b/config/examples/TinyBoy2/Configuration.h @@ -1394,19 +1394,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/Tronxy/D01/CXY-v6-191017 board/Configuration.h b/config/examples/Tronxy/D01/CXY-v6-191017 board/Configuration.h index 7e9c0094f0..f8beb6bbc9 100644 --- a/config/examples/Tronxy/D01/CXY-v6-191017 board/Configuration.h +++ b/config/examples/Tronxy/D01/CXY-v6-191017 board/Configuration.h @@ -1362,19 +1362,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/Tronxy/X1/Configuration.h b/config/examples/Tronxy/X1/Configuration.h index 4f98da45e4..71c8e9fe69 100644 --- a/config/examples/Tronxy/X1/Configuration.h +++ b/config/examples/Tronxy/X1/Configuration.h @@ -1354,19 +1354,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/Tronxy/X3A/Configuration.h b/config/examples/Tronxy/X3A/Configuration.h index a159bf55c3..9dc502a0f1 100644 --- a/config/examples/Tronxy/X3A/Configuration.h +++ b/config/examples/Tronxy/X3A/Configuration.h @@ -1353,19 +1353,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/Tronxy/X5S-2E/Green Board (Chitu V5)/Configuration.h b/config/examples/Tronxy/X5S-2E/Green Board (Chitu V5)/Configuration.h index 78504a1289..cba1552b27 100644 --- a/config/examples/Tronxy/X5S-2E/Green Board (Chitu V5)/Configuration.h +++ b/config/examples/Tronxy/X5S-2E/Green Board (Chitu V5)/Configuration.h @@ -1354,19 +1354,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/Tronxy/X5S-2E/Red Board (Tronxy 3.1.0)/Configuration.h b/config/examples/Tronxy/X5S-2E/Red Board (Tronxy 3.1.0)/Configuration.h index 7c0e90d03a..c671342e02 100644 --- a/config/examples/Tronxy/X5S-2E/Red Board (Tronxy 3.1.0)/Configuration.h +++ b/config/examples/Tronxy/X5S-2E/Red Board (Tronxy 3.1.0)/Configuration.h @@ -1362,19 +1362,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/Tronxy/X5S/Configuration.h b/config/examples/Tronxy/X5S/Configuration.h index cec53c2a29..1721119e40 100644 --- a/config/examples/Tronxy/X5S/Configuration.h +++ b/config/examples/Tronxy/X5S/Configuration.h @@ -1353,19 +1353,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/Tronxy/X5SA-2E/Configuration.h b/config/examples/Tronxy/X5SA-2E/Configuration.h index f7fad4f8c5..c36e621aa0 100644 --- a/config/examples/Tronxy/X5SA-2E/Configuration.h +++ b/config/examples/Tronxy/X5SA-2E/Configuration.h @@ -1356,19 +1356,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/Tronxy/X5SA/Configuration.h b/config/examples/Tronxy/X5SA/Configuration.h index 59666a4ce5..871277d8ec 100644 --- a/config/examples/Tronxy/X5SA/Configuration.h +++ b/config/examples/Tronxy/X5SA/Configuration.h @@ -1355,19 +1355,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/Tronxy/XY100/Configuration.h b/config/examples/Tronxy/XY100/Configuration.h index 5433e4138f..54b208cde0 100644 --- a/config/examples/Tronxy/XY100/Configuration.h +++ b/config/examples/Tronxy/XY100/Configuration.h @@ -1360,19 +1360,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/Tronxy/XY2-Pro/Configuration.h b/config/examples/Tronxy/XY2-Pro/Configuration.h index a93d7683da..2f9f141f45 100644 --- a/config/examples/Tronxy/XY2-Pro/Configuration.h +++ b/config/examples/Tronxy/XY2-Pro/Configuration.h @@ -1389,19 +1389,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/Two Trees/BlueR Plus/Configuration.h b/config/examples/Two Trees/BlueR Plus/Configuration.h index 29dd4d9a1b..61c3daf219 100644 --- a/config/examples/Two Trees/BlueR Plus/Configuration.h +++ b/config/examples/Two Trees/BlueR Plus/Configuration.h @@ -1354,19 +1354,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/Two Trees/BlueR/BlueR V1/Configuration.h b/config/examples/Two Trees/BlueR/BlueR V1/Configuration.h index cc9e61199c..e6dbacab57 100644 --- a/config/examples/Two Trees/BlueR/BlueR V1/Configuration.h +++ b/config/examples/Two Trees/BlueR/BlueR V1/Configuration.h @@ -1370,19 +1370,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/Two Trees/BlueR/BlueR V2/Configuration.h b/config/examples/Two Trees/BlueR/BlueR V2/Configuration.h index 14d32f56ef..ec0116bedc 100644 --- a/config/examples/Two Trees/BlueR/BlueR V2/Configuration.h +++ b/config/examples/Two Trees/BlueR/BlueR V2/Configuration.h @@ -1371,19 +1371,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/Two Trees/BlueR/BlueR V3/Configuration.h b/config/examples/Two Trees/BlueR/BlueR V3/Configuration.h index 2bfc45817f..48355cfecc 100644 --- a/config/examples/Two Trees/BlueR/BlueR V3/Configuration.h +++ b/config/examples/Two Trees/BlueR/BlueR V3/Configuration.h @@ -1382,19 +1382,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2.1/Configuration.h b/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2.1/Configuration.h index ee8371fa7e..7b5ad78fdc 100644 --- a/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2.1/Configuration.h +++ b/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2.1/Configuration.h @@ -1375,19 +1375,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2/Configuration.h b/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2/Configuration.h index d70006ccbe..b428bab236 100644 --- a/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2/Configuration.h +++ b/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2/Configuration.h @@ -1375,19 +1375,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/Two Trees/Sapphire Pro/Configuration.h b/config/examples/Two Trees/Sapphire Pro/Configuration.h index e2b41d250a..331394406e 100644 --- a/config/examples/Two Trees/Sapphire Pro/Configuration.h +++ b/config/examples/Two Trees/Sapphire Pro/Configuration.h @@ -1368,19 +1368,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/UltiMachine/Archim1/Configuration.h b/config/examples/UltiMachine/Archim1/Configuration.h index db58fbd0ec..1507a3a900 100644 --- a/config/examples/UltiMachine/Archim1/Configuration.h +++ b/config/examples/UltiMachine/Archim1/Configuration.h @@ -1353,19 +1353,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/UltiMachine/Archim2/Configuration.h b/config/examples/UltiMachine/Archim2/Configuration.h index 8ba8d75c54..a9c5945511 100644 --- a/config/examples/UltiMachine/Archim2/Configuration.h +++ b/config/examples/UltiMachine/Archim2/Configuration.h @@ -1353,19 +1353,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/Ultimaker/Ultimaker 2+/Configuration.h b/config/examples/Ultimaker/Ultimaker 2+/Configuration.h index 4033e7417f..40bb3f2cde 100644 --- a/config/examples/Ultimaker/Ultimaker 2+/Configuration.h +++ b/config/examples/Ultimaker/Ultimaker 2+/Configuration.h @@ -1356,19 +1356,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/Ultimaker/Ultimaker 2/Configuration.h b/config/examples/Ultimaker/Ultimaker 2/Configuration.h index 2b08064f46..4c87b475cc 100644 --- a/config/examples/Ultimaker/Ultimaker 2/Configuration.h +++ b/config/examples/Ultimaker/Ultimaker 2/Configuration.h @@ -1368,19 +1368,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/Ultimaker/Ultimaker Original (1.5.7)/Configuration.h b/config/examples/Ultimaker/Ultimaker Original (1.5.7)/Configuration.h index 7c5667a3b0..3410400c53 100644 --- a/config/examples/Ultimaker/Ultimaker Original (1.5.7)/Configuration.h +++ b/config/examples/Ultimaker/Ultimaker Original (1.5.7)/Configuration.h @@ -1353,19 +1353,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/Ultimaker/Ultimaker Original Plus (2.1.1)/Configuration.h b/config/examples/Ultimaker/Ultimaker Original Plus (2.1.1)/Configuration.h index c671610666..0001e8f77d 100644 --- a/config/examples/Ultimaker/Ultimaker Original Plus (2.1.1)/Configuration.h +++ b/config/examples/Ultimaker/Ultimaker Original Plus (2.1.1)/Configuration.h @@ -1356,19 +1356,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/Ultimaker/Ultimaker Original Plus DXU/Configuration.h b/config/examples/Ultimaker/Ultimaker Original Plus DXU/Configuration.h index 8e00c6a86f..4ccae33c20 100644 --- a/config/examples/Ultimaker/Ultimaker Original Plus DXU/Configuration.h +++ b/config/examples/Ultimaker/Ultimaker Original Plus DXU/Configuration.h @@ -1356,19 +1356,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/VORONDesign/Configuration.h b/config/examples/VORONDesign/Configuration.h index b851f7b3d6..7bdf2fd0cc 100644 --- a/config/examples/VORONDesign/Configuration.h +++ b/config/examples/VORONDesign/Configuration.h @@ -1353,19 +1353,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/Velleman/K8200 Upgraded/Configuration.h b/config/examples/Velleman/K8200 Upgraded/Configuration.h index f5b2031916..44a9260978 100644 --- a/config/examples/Velleman/K8200 Upgraded/Configuration.h +++ b/config/examples/Velleman/K8200 Upgraded/Configuration.h @@ -1388,19 +1388,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/Velleman/K8200/Configuration.h b/config/examples/Velleman/K8200/Configuration.h index b8a88f91c3..e91dcc39f6 100644 --- a/config/examples/Velleman/K8200/Configuration.h +++ b/config/examples/Velleman/K8200/Configuration.h @@ -1391,19 +1391,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/Velleman/K8400/Dual-head/Configuration.h b/config/examples/Velleman/K8400/Dual-head/Configuration.h index 8c0abe212e..770ad7b9a8 100644 --- a/config/examples/Velleman/K8400/Dual-head/Configuration.h +++ b/config/examples/Velleman/K8400/Dual-head/Configuration.h @@ -1354,19 +1354,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/Velleman/K8400/Single-head/Configuration.h b/config/examples/Velleman/K8400/Single-head/Configuration.h index 45ee200a25..4a07a3991f 100644 --- a/config/examples/Velleman/K8400/Single-head/Configuration.h +++ b/config/examples/Velleman/K8400/Single-head/Configuration.h @@ -1354,19 +1354,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/WASP/PowerWASP/Configuration.h b/config/examples/WASP/PowerWASP/Configuration.h index e2708f0c07..e04cc8a493 100644 --- a/config/examples/WASP/PowerWASP/Configuration.h +++ b/config/examples/WASP/PowerWASP/Configuration.h @@ -1367,19 +1367,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/Wanhao/Duplicator 4S/Configuration.h b/config/examples/Wanhao/Duplicator 4S/Configuration.h index 630a54eb7f..8d40755128 100644 --- a/config/examples/Wanhao/Duplicator 4S/Configuration.h +++ b/config/examples/Wanhao/Duplicator 4S/Configuration.h @@ -1353,19 +1353,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/Wanhao/Duplicator 6/Configuration.h b/config/examples/Wanhao/Duplicator 6/Configuration.h index 583d914121..f1bc8abf54 100644 --- a/config/examples/Wanhao/Duplicator 6/Configuration.h +++ b/config/examples/Wanhao/Duplicator 6/Configuration.h @@ -1353,19 +1353,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/Wanhao/Duplicator i3 2.1/Configuration.h b/config/examples/Wanhao/Duplicator i3 2.1/Configuration.h index d4e1590af9..fc3a5f5fb6 100644 --- a/config/examples/Wanhao/Duplicator i3 2.1/Configuration.h +++ b/config/examples/Wanhao/Duplicator i3 2.1/Configuration.h @@ -1353,19 +1353,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/Wanhao/Duplicator i3 Mini/Configuration.h b/config/examples/Wanhao/Duplicator i3 Mini/Configuration.h index 9e4bcab554..d2f7159d60 100644 --- a/config/examples/Wanhao/Duplicator i3 Mini/Configuration.h +++ b/config/examples/Wanhao/Duplicator i3 Mini/Configuration.h @@ -1354,19 +1354,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/Wanhao/Duplicator i3 Plus/Configuration.h b/config/examples/Wanhao/Duplicator i3 Plus/Configuration.h index 8d603916b0..4258237d3d 100644 --- a/config/examples/Wanhao/Duplicator i3 Plus/Configuration.h +++ b/config/examples/Wanhao/Duplicator i3 Plus/Configuration.h @@ -1353,19 +1353,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/Weedo/Tina2/V2/Configuration.h b/config/examples/Weedo/Tina2/V2/Configuration.h index d00917c380..d9ea68d4ef 100644 --- a/config/examples/Weedo/Tina2/V2/Configuration.h +++ b/config/examples/Weedo/Tina2/V2/Configuration.h @@ -1353,19 +1353,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/Weedo/Tina2/V3/Configuration.h b/config/examples/Weedo/Tina2/V3/Configuration.h index aed09b8d1d..b78e274626 100644 --- a/config/examples/Weedo/Tina2/V3/Configuration.h +++ b/config/examples/Weedo/Tina2/V3/Configuration.h @@ -1353,19 +1353,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/Weistek/wt150/Configuration.h b/config/examples/Weistek/wt150/Configuration.h index 61791ac965..256875e933 100644 --- a/config/examples/Weistek/wt150/Configuration.h +++ b/config/examples/Weistek/wt150/Configuration.h @@ -1354,19 +1354,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/Zonestar/P802M/Configuration.h b/config/examples/Zonestar/P802M/Configuration.h index 745d5d3e6f..5abb306da1 100644 --- a/config/examples/Zonestar/P802M/Configuration.h +++ b/config/examples/Zonestar/P802M/Configuration.h @@ -1353,19 +1353,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (A4988)/Configuration.h b/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (A4988)/Configuration.h index f53f681a1a..adc142d04f 100644 --- a/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (A4988)/Configuration.h +++ b/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (A4988)/Configuration.h @@ -1356,17 +1356,15 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ // The supplied blue proximity sensor has the same wire plug as an endstop // We are using the POWER_LOSS pin P1 0 for the leveling probe diff --git a/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (TMC2209)/Configuration.h b/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (TMC2209)/Configuration.h index 2d22f82d79..13b5b88867 100755 --- a/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (TMC2209)/Configuration.h +++ b/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (TMC2209)/Configuration.h @@ -1355,17 +1355,15 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ // The supplied blue proximity sensor has the same wire plug as an endstop // We are using the POWER_LOSS pin P1 0 for the leveling probe diff --git a/config/examples/delta/Anycubic/Kossel Linear Plus/Configuration.h b/config/examples/delta/Anycubic/Kossel Linear Plus/Configuration.h index e7f0a46f11..418394ab27 100644 --- a/config/examples/delta/Anycubic/Kossel Linear Plus/Configuration.h +++ b/config/examples/delta/Anycubic/Kossel Linear Plus/Configuration.h @@ -1410,19 +1410,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/delta/Anycubic/Kossel/Configuration.h b/config/examples/delta/Anycubic/Kossel/Configuration.h index bdb23281a0..f67e87db23 100644 --- a/config/examples/delta/Anycubic/Kossel/Configuration.h +++ b/config/examples/delta/Anycubic/Kossel/Configuration.h @@ -1409,19 +1409,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/delta/Anycubic/Predator/Configuration.h b/config/examples/delta/Anycubic/Predator/Configuration.h index 681870151f..afd4334644 100644 --- a/config/examples/delta/Anycubic/Predator/Configuration.h +++ b/config/examples/delta/Anycubic/Predator/Configuration.h @@ -1361,19 +1361,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/delta/Dreammaker/Overlord/Configuration.h b/config/examples/delta/Dreammaker/Overlord/Configuration.h index 6f2ded8e0f..efd0688b8c 100644 --- a/config/examples/delta/Dreammaker/Overlord/Configuration.h +++ b/config/examples/delta/Dreammaker/Overlord/Configuration.h @@ -1360,19 +1360,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/delta/Dreammaker/Overlord_Pro/Configuration.h b/config/examples/delta/Dreammaker/Overlord_Pro/Configuration.h index 4b2e72ff6d..d490a004b3 100644 --- a/config/examples/delta/Dreammaker/Overlord_Pro/Configuration.h +++ b/config/examples/delta/Dreammaker/Overlord_Pro/Configuration.h @@ -1367,19 +1367,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/delta/FLSUN/Q5-nano_v1/Configuration.h b/config/examples/delta/FLSUN/Q5-nano_v1/Configuration.h index 2ee0d6f9b4..3bd7ffbb3f 100644 --- a/config/examples/delta/FLSUN/Q5-nano_v1/Configuration.h +++ b/config/examples/delta/FLSUN/Q5-nano_v1/Configuration.h @@ -1362,19 +1362,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/delta/FLSUN/Q5-nano_v2/Configuration.h b/config/examples/delta/FLSUN/Q5-nano_v2/Configuration.h index 89129bb7ab..4d614d9ace 100644 --- a/config/examples/delta/FLSUN/Q5-nano_v2/Configuration.h +++ b/config/examples/delta/FLSUN/Q5-nano_v2/Configuration.h @@ -1360,19 +1360,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/delta/FLSUN/QQ-S/Configuration.h b/config/examples/delta/FLSUN/QQ-S/Configuration.h index d70f3cbe89..a8a7d7b18b 100644 --- a/config/examples/delta/FLSUN/QQ-S/Configuration.h +++ b/config/examples/delta/FLSUN/QQ-S/Configuration.h @@ -1361,19 +1361,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/delta/FLSUN/QQS-Pro/Configuration.h b/config/examples/delta/FLSUN/QQS-Pro/Configuration.h index 909e7e50ba..f6f88a2c58 100644 --- a/config/examples/delta/FLSUN/QQS-Pro/Configuration.h +++ b/config/examples/delta/FLSUN/QQS-Pro/Configuration.h @@ -1361,19 +1361,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/delta/FLSUN/auto_calibrate/Configuration.h b/config/examples/delta/FLSUN/auto_calibrate/Configuration.h index 98a71ea651..fda50bdc7a 100644 --- a/config/examples/delta/FLSUN/auto_calibrate/Configuration.h +++ b/config/examples/delta/FLSUN/auto_calibrate/Configuration.h @@ -1361,19 +1361,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/delta/FLSUN/kossel/Configuration.h b/config/examples/delta/FLSUN/kossel/Configuration.h index 107833d483..b0f11f5918 100644 --- a/config/examples/delta/FLSUN/kossel/Configuration.h +++ b/config/examples/delta/FLSUN/kossel/Configuration.h @@ -1361,19 +1361,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/delta/FLSUN/kossel_mini/Configuration.h b/config/examples/delta/FLSUN/kossel_mini/Configuration.h index aa8e2681ee..33ef4a07d9 100644 --- a/config/examples/delta/FLSUN/kossel_mini/Configuration.h +++ b/config/examples/delta/FLSUN/kossel_mini/Configuration.h @@ -1361,19 +1361,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/delta/Geeetech/G2/Configuration.h b/config/examples/delta/Geeetech/G2/Configuration.h index b7f4600d33..39858a0dc7 100644 --- a/config/examples/delta/Geeetech/G2/Configuration.h +++ b/config/examples/delta/Geeetech/G2/Configuration.h @@ -1361,19 +1361,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/delta/Geeetech/G2Pro/Configuration.h b/config/examples/delta/Geeetech/G2Pro/Configuration.h index 05da9cb7f5..630d3bccb9 100644 --- a/config/examples/delta/Geeetech/G2Pro/Configuration.h +++ b/config/examples/delta/Geeetech/G2Pro/Configuration.h @@ -1361,19 +1361,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/delta/Geeetech/G2S/Configuration.h b/config/examples/delta/Geeetech/G2S/Configuration.h index cf633dfa18..5ec5a1b036 100644 --- a/config/examples/delta/Geeetech/G2S/Configuration.h +++ b/config/examples/delta/Geeetech/G2S/Configuration.h @@ -1361,19 +1361,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/delta/Geeetech/G2SPro/Configuration.h b/config/examples/delta/Geeetech/G2SPro/Configuration.h index 172d905f60..ddd9f8a016 100644 --- a/config/examples/delta/Geeetech/G2SPro/Configuration.h +++ b/config/examples/delta/Geeetech/G2SPro/Configuration.h @@ -1361,19 +1361,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/delta/Geeetech/Rostock 301/Configuration.h b/config/examples/delta/Geeetech/Rostock 301/Configuration.h index 237301eda3..843d37ab0f 100644 --- a/config/examples/delta/Geeetech/Rostock 301/Configuration.h +++ b/config/examples/delta/Geeetech/Rostock 301/Configuration.h @@ -1361,19 +1361,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/delta/Hatchbox_Alpha/Configuration.h b/config/examples/delta/Hatchbox_Alpha/Configuration.h index 55957e6784..a64e703732 100644 --- a/config/examples/delta/Hatchbox_Alpha/Configuration.h +++ b/config/examples/delta/Hatchbox_Alpha/Configuration.h @@ -1366,19 +1366,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/delta/MKS/SBASE/Configuration.h b/config/examples/delta/MKS/SBASE/Configuration.h index 0f1404e88b..bb78c91413 100644 --- a/config/examples/delta/MKS/SBASE/Configuration.h +++ b/config/examples/delta/MKS/SBASE/Configuration.h @@ -1361,19 +1361,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/delta/Malyan M300/Configuration.h b/config/examples/delta/Malyan M300/Configuration.h index add031d342..2d6baa902f 100644 --- a/config/examples/delta/Malyan M300/Configuration.h +++ b/config/examples/delta/Malyan M300/Configuration.h @@ -1356,19 +1356,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/delta/Tevo Little Monster/Configuration.h b/config/examples/delta/Tevo Little Monster/Configuration.h index d9bb0d0ecb..63fa2478fd 100644 --- a/config/examples/delta/Tevo Little Monster/Configuration.h +++ b/config/examples/delta/Tevo Little Monster/Configuration.h @@ -1362,19 +1362,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -#define Z_MIN_PROBE_PIN P1_28 // Pin 32 is the RAMPS default +#define Z_MIN_PROBE_PIN P1_28 /** * Probe Type diff --git a/config/examples/delta/Velleman/K8800/Configuration.h b/config/examples/delta/Velleman/K8800/Configuration.h index 624849d8b8..6b1a7fcf93 100644 --- a/config/examples/delta/Velleman/K8800/Configuration.h +++ b/config/examples/delta/Velleman/K8800/Configuration.h @@ -1388,19 +1388,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/delta/generic/Configuration.h b/config/examples/delta/generic/Configuration.h index 77075afc57..e299c9f1c1 100644 --- a/config/examples/delta/generic/Configuration.h +++ b/config/examples/delta/generic/Configuration.h @@ -1361,19 +1361,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/delta/kossel_clear/Configuration.h b/config/examples/delta/kossel_clear/Configuration.h index a5e9ce1218..d202fc4ab6 100644 --- a/config/examples/delta/kossel_clear/Configuration.h +++ b/config/examples/delta/kossel_clear/Configuration.h @@ -1361,19 +1361,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +#define Z_MIN_PROBE_PIN 32 /** * Probe Type diff --git a/config/examples/delta/kossel_mini/Configuration.h b/config/examples/delta/kossel_mini/Configuration.h index f632e6559b..f0830d7776 100644 --- a/config/examples/delta/kossel_mini/Configuration.h +++ b/config/examples/delta/kossel_mini/Configuration.h @@ -1361,19 +1361,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/delta/kossel_pro/Configuration.h b/config/examples/delta/kossel_pro/Configuration.h index 6e7f1d7b1f..ffd2969c23 100644 --- a/config/examples/delta/kossel_pro/Configuration.h +++ b/config/examples/delta/kossel_pro/Configuration.h @@ -1373,19 +1373,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/delta/kossel_xl/Configuration.h b/config/examples/delta/kossel_xl/Configuration.h index 43c2707979..2fd3fa875f 100644 --- a/config/examples/delta/kossel_xl/Configuration.h +++ b/config/examples/delta/kossel_xl/Configuration.h @@ -1367,19 +1367,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/gCreate/gMax1.5+/Configuration.h b/config/examples/gCreate/gMax1.5+/Configuration.h index 2769efd252..d0fc79a1c4 100644 --- a/config/examples/gCreate/gMax1.5+/Configuration.h +++ b/config/examples/gCreate/gMax1.5+/Configuration.h @@ -1360,19 +1360,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/linear_axes/Octopus 8 LINEAR_AXES/Configuration.h b/config/examples/linear_axes/Octopus 8 LINEAR_AXES/Configuration.h index c5b2537b5c..2681d75dc4 100644 --- a/config/examples/linear_axes/Octopus 8 LINEAR_AXES/Configuration.h +++ b/config/examples/linear_axes/Octopus 8 LINEAR_AXES/Configuration.h @@ -1365,19 +1365,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/linear_axes/RAMPS 5 LINEAR_AXES/Configuration.h b/config/examples/linear_axes/RAMPS 5 LINEAR_AXES/Configuration.h index f2a2a49072..7d34c69c02 100644 --- a/config/examples/linear_axes/RAMPS 5 LINEAR_AXES/Configuration.h +++ b/config/examples/linear_axes/RAMPS 5 LINEAR_AXES/Configuration.h @@ -1340,19 +1340,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/makibox/Configuration.h b/config/examples/makibox/Configuration.h index 6873d46c3e..17ad6082c1 100644 --- a/config/examples/makibox/Configuration.h +++ b/config/examples/makibox/Configuration.h @@ -1356,19 +1356,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type diff --git a/config/examples/tvrrug/Round2/Configuration.h b/config/examples/tvrrug/Round2/Configuration.h index 5e672c081d..9757016986 100644 --- a/config/examples/tvrrug/Round2/Configuration.h +++ b/config/examples/tvrrug/Round2/Configuration.h @@ -1360,19 +1360,17 @@ /** * Z_MIN_PROBE_PIN * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. + * Override this pin only if the probe cannot be connected to + * the default Z_MIN_PROBE_PIN for the selected MOTHERBOARD. * * - The simplest option is to use a free endstop connector. * - Use 5V for powered (usually inductive) sensors. * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. + * - For simple switches... + * - Normally-closed (NC) also connect to GND. + * - Normally-open (NO) also connect to 5V. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +//#define Z_MIN_PROBE_PIN -1 /** * Probe Type