From 34c940c076b3678bef7c47ed1298e21e8d2de331 Mon Sep 17 00:00:00 2001 From: Scott Lahteine Date: Sat, 13 Dec 2025 15:37:27 -0600 Subject: [PATCH] =?UTF-8?q?=F0=9F=93=9D=20Specify=20mm=20for=20NOZZLE=5FTO?= =?UTF-8?q?=5FPROBE=5FOFFSET?= MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit --- config/default/Configuration.h | 4 ++-- config/examples/3DFabXYZ/Migbot/Configuration.h | 4 ++-- config/examples/3DMatik/XL/Configuration.h | 4 ++-- config/examples/ADIMLab/Gantry v1/Configuration.h | 4 ++-- config/examples/ADIMLab/Gantry v2/Configuration.h | 4 ++-- config/examples/Alfawise/U20-bltouch/Configuration.h | 4 ++-- config/examples/Alfawise/U20/Configuration.h | 4 ++-- config/examples/AliExpress/CL-260/Configuration.h | 4 ++-- config/examples/AliExpress/UM2pExt/Configuration.h | 4 ++-- config/examples/Anet/A2/Configuration.h | 2 +- config/examples/Anet/A2plus/Configuration.h | 2 +- config/examples/Anet/A6/Configuration.h | 4 ++-- config/examples/Anet/A8/Configuration.h | 4 ++-- config/examples/Anet/A8plus/Configuration.h | 4 ++-- config/examples/Anet/A9/Configuration.h | 4 ++-- config/examples/Anet/E10/Configuration.h | 4 ++-- config/examples/Anet/E16/BTT SKR 1.3/Configuration.h | 4 ++-- config/examples/Anet/E16/Stock/Configuration.h | 4 ++-- config/examples/Anet/ET4+/Configuration.h | 4 ++-- config/examples/Anet/ET4-Pro/Configuration.h | 4 ++-- config/examples/Anet/ET4/Configuration.h | 4 ++-- config/examples/Anet/ET4X/Configuration.h | 4 ++-- config/examples/Anet/ET5-Pro/Configuration.h | 4 ++-- config/examples/Anet/ET5/Configuration.h | 4 ++-- config/examples/Anet/ET5X/Configuration.h | 4 ++-- config/examples/AnyCubic/Chiron/Configuration.h | 4 ++-- .../AnyCubic/Mega Zero 2.0/Anycubic V1/Configuration.h | 4 ++-- .../examples/AnyCubic/Mega Zero/Anycubic V1/Configuration.h | 4 ++-- .../Mega Zero/BigTreeTech SKR Mini MZ V1.0/Configuration.h | 4 ++-- config/examples/AnyCubic/Vyper/Configuration.h | 4 ++-- .../examples/AnyCubic/i3 Mega/Trigorilla AVR/Configuration.h | 4 ++-- .../AnyCubic/i3 Mega/Trigorilla Pro STM32/Configuration.h | 4 ++-- config/examples/AnyCubic/i3/Configuration.h | 4 ++-- config/examples/ArmEd/Configuration.h | 4 ++-- config/examples/Artillery/Genius Pro/Configuration.h | 4 ++-- config/examples/Artillery/Genius/BLTouch/Configuration.h | 4 ++-- config/examples/Artillery/Genius/V1/Configuration.h | 4 ++-- config/examples/Artillery/Hornet/Configuration.h | 4 ++-- .../Artillery/Sidewinder X1/0.9 BMG - E3D V6/Configuration.h | 4 ++-- config/examples/Artillery/Sidewinder X1/V1/Configuration.h | 4 ++-- config/examples/Artillery/Sidewinder X2/Configuration.h | 4 ++-- config/examples/Azteeg/X5GT/Configuration.h | 4 ++-- config/examples/BIBO/TouchX/cyclops/Configuration.h | 4 ++-- .../examples/BIBO/TouchX/default - BLTouch/Configuration.h | 4 ++-- config/examples/BIBO/TouchX/default/Configuration.h | 4 ++-- config/examples/BIQU/B1 SE Plus/Configuration.h | 4 ++-- config/examples/BIQU/B1 SE/Configuration.h | 4 ++-- config/examples/BIQU/B1/Configuration.h | 4 ++-- config/examples/BIQU/BX/all-metal-hotend/Configuration.h | 4 ++-- config/examples/BIQU/BX/base/Configuration.h | 4 ++-- config/examples/BIQU/Hurakan/Configuration.h | 4 ++-- config/examples/BIQU/Thunder Standard/Configuration.h | 4 ++-- config/examples/BQ/Hephestos/Configuration.h | 4 ++-- config/examples/BQ/Hephestos_2/Configuration.h | 4 ++-- config/examples/BQ/WITBOX/Configuration.h | 4 ++-- config/examples/CNC/miniRambo/Configuration.h | 4 ++-- config/examples/CTC/A13/Configuration.h | 4 ++-- config/examples/CTC/Bizer/Configuration.h | 4 ++-- config/examples/CTC/i3 2560 Rev A/no probe/Configuration.h | 4 ++-- config/examples/Cartesio/Configuration.h | 4 ++-- config/examples/Copymaster3D/300/Configuration.h | 4 ++-- config/examples/Copymaster3D/400/Configuration.h | 4 ++-- config/examples/Copymaster3D/500/Configuration.h | 4 ++-- config/examples/Creality/CR-10 Max/Configuration.h | 4 ++-- .../CR-10 Mini/BigTreeTech SKR Mini E3 2.0/Configuration.h | 4 ++-- .../CR-10 Mini/BigTreeTech SKR Mini E3 2.0/README.md | 2 +- .../CR-10 Mini/BigTreeTech SKR Mini E3 3.0/Configuration.h | 4 ++-- .../CR-10 Mini/BigTreeTech SKR Mini E3 3.0/README.md | 2 +- .../examples/Creality/CR-10 Mini/CrealityV1/Configuration.h | 4 ++-- config/examples/Creality/CR-10 Mini/MEEB-3DP/Configuration.h | 4 ++-- config/examples/Creality/CR-10 S4/CrealityV1/Configuration.h | 4 ++-- .../Configuration.h | 4 ++-- .../CR-10 S5/BigTreeTech SKR Mini E3 v3/Configuration.h | 4 ++-- config/examples/Creality/CR-10 S5/CrealityV1/Configuration.h | 4 ++-- .../Creality/CR-10 S5/CrealityV2.2 - BLTouch/Configuration.h | 4 ++-- .../Creality/CR-10 S5/CrealityV427 - BLTouch/Configuration.h | 4 ++-- config/examples/Creality/CR-10 V2/Configuration.h | 4 ++-- .../CR-10 V3/BigTreeTech SKR Mini E3 v3/Configuration.h | 4 ++-- config/examples/Creality/CR-10 V3/Stock/Configuration.h | 4 ++-- .../CR-10/BigTreeTech SKR Mini E3 2.0/Configuration.h | 4 ++-- .../CR-10/BigTreeTech SKR Mini E3 3.0/Configuration.h | 4 ++-- config/examples/Creality/CR-10/CrealityV1/Configuration.h | 4 ++-- config/examples/Creality/CR-10S Pro/Configuration.h | 4 ++-- .../CR-10S/BigTreeTech SKR 1.4 Turbo TMC2209/Configuration.h | 4 ++-- .../CR-10S/BigTreeTech SKR 2.0 TMC2209/Configuration.h | 4 ++-- .../CR-10S/BigTreeTech SKR Mini E3 2.0/Configuration.h | 4 ++-- .../CR-10S/BigTreeTech SKR Mini E3 3.0/Configuration.h | 4 ++-- .../Creality/CR-10S/BigTreeTech SKR Pro v1.2/Configuration.h | 4 ++-- .../Creality/CR-10S/CrealityV1 - BLTouch/Configuration.h | 4 ++-- config/examples/Creality/CR-10S/CrealityV1/Configuration.h | 4 ++-- config/examples/Creality/CR-20 Pro/Configuration.h | 4 ++-- .../Creality/CR-20/RepRapWorld Minitronics20/Configuration.h | 4 ++-- config/examples/Creality/CR-20/Stock/Configuration.h | 4 ++-- config/examples/Creality/CR-30 PrintMill/Configuration.h | 4 ++-- config/examples/Creality/CR-6 SE/Configuration.h | 4 ++-- config/examples/Creality/CR-8/Configuration.h | 4 ++-- .../Creality/Ender-2 Pro/CrealityV24S4/Configuration.h | 4 ++-- .../Creality/Ender-2 Pro/CrealityV423/Configuration.h | 4 ++-- config/examples/Creality/Ender-2/Configuration.h | 4 ++-- .../BigTreeTech SKR Mini E3 3.0/Configuration.h | 4 ++-- .../Creality/Ender-3 Max Neo/CrealityV422/Configuration.h | 4 ++-- config/examples/Creality/Ender-3 Max/Configuration.h | 4 ++-- config/examples/Creality/Ender-3 Neo/Configuration.h | 4 ++-- .../Ender-3 Pro/BigTreeTech SKR 1.4 Turbo/Configuration.h | 4 ++-- .../Ender-3 Pro/BigTreeTech SKR Mini E3 1.0/Configuration.h | 4 ++-- .../Ender-3 Pro/BigTreeTech SKR Mini E3 1.2/Configuration.h | 4 ++-- .../Ender-3 Pro/BigTreeTech SKR Mini E3 2.0/Configuration.h | 4 ++-- .../BigTreeTech SKR Mini E3 3.0/BLTouch/Configuration.h | 4 ++-- .../BigTreeTech SKR Mini E3 3.0/base/Configuration.h | 4 ++-- .../Creality/Ender-3 Pro/Creality free-runs/Configuration.h | 4 ++-- .../examples/Creality/Ender-3 Pro/CrealityV1/Configuration.h | 4 ++-- .../Creality/Ender-3 Pro/CrealityV422/Configuration.h | 4 ++-- .../Ender-3 Pro/CrealityV427/BLTouch/Configuration.h | 4 ++-- .../Creality/Ender-3 Pro/CrealityV427/base/Configuration.h | 4 ++-- config/examples/Creality/Ender-3 S1 Plus/Configuration.h | 4 ++-- config/examples/Creality/Ender-3 S1 Pro/Configuration.h | 4 ++-- config/examples/Creality/Ender-3 S1/STM32F1/Configuration.h | 4 ++-- config/examples/Creality/Ender-3 S1/STM32F4/Configuration.h | 4 ++-- .../BigTreeTech SKR Mini E3 3.0/Configuration.h | 4 ++-- .../Creality/Ender-3 V2 Neo/CrealityV422/Configuration.h | 4 ++-- .../BigTreeTech SKR E3 Turbo/CrealityUI/Configuration.h | 4 ++-- .../BigTreeTech SKR E3 Turbo/MarlinUI/Configuration.h | 4 ++-- .../BigTreeTech SKR Mini E3 2.0/CrealityUI/Configuration.h | 4 ++-- .../BigTreeTech SKR Mini E3 2.0/MarlinUI/Configuration.h | 4 ++-- .../BigTreeTech SKR Mini E3 3.0/CrealityUI/Configuration.h | 4 ++-- .../BigTreeTech SKR Mini E3 3.0/MarlinUI/Configuration.h | 4 ++-- .../Ender-3 V2/CrealityV422/CrealityUI/Configuration.h | 4 ++-- .../Ender-3 V2/CrealityV422/MarlinUI/Configuration.h | 4 ++-- .../Ender-3 V2/CrealityV427/CrealityUI/Configuration.h | 4 ++-- .../Ender-3 V2/CrealityV427/MarlinUI/Configuration.h | 4 ++-- .../Creality/Ender-3/BigTreeTech E3 RRF/Configuration.h | 4 ++-- .../Creality/Ender-3/BigTreeTech Manta E3 EZ/Configuration.h | 4 ++-- .../Creality/Ender-3/BigTreeTech SKR 1.4/Configuration.h | 4 ++-- .../BigTreeTech SKR E3 Turbo/2-into-1 Hotend/Configuration.h | 4 ++-- .../Ender-3/BigTreeTech SKR E3 Turbo/Dual Z/Configuration.h | 4 ++-- .../BigTreeTech SKR E3 Turbo/Single Extruder/Configuration.h | 4 ++-- .../Ender-3/BigTreeTech SKR E3-DIP V1.1/Configuration.h | 4 ++-- .../Ender-3/BigTreeTech SKR Mini E3 1.0/Configuration.h | 4 ++-- .../Ender-3/BigTreeTech SKR Mini E3 1.2/Configuration.h | 4 ++-- .../Ender-3/BigTreeTech SKR Mini E3 2.0/Configuration.h | 4 ++-- .../Ender-3/BigTreeTech SKR Mini E3 3.0/Configuration.h | 4 ++-- .../Creality/Ender-3/Creality free-runs/Configuration.h | 4 ++-- config/examples/Creality/Ender-3/CrealityV1/Configuration.h | 4 ++-- .../examples/Creality/Ender-3/CrealityV422/Configuration.h | 4 ++-- .../examples/Creality/Ender-3/CrealityV427/Configuration.h | 4 ++-- .../Ender-3/FYSETC Cheetah 1.2/BLTouch/Configuration.h | 4 ++-- .../Creality/Ender-3/FYSETC Cheetah 1.2/base/Configuration.h | 4 ++-- .../Creality/Ender-3/FYSETC Cheetah 2.0/Configuration.h | 4 ++-- .../Creality/Ender-3/FYSETC Cheetah/BLTouch/Configuration.h | 4 ++-- .../Creality/Ender-3/FYSETC Cheetah/base/Configuration.h | 4 ++-- config/examples/Creality/Ender-3/MEEB-3DP/Configuration.h | 4 ++-- .../Creality/Ender-3/MKS Robin E3/V1.0/Configuration.h | 4 ++-- .../Creality/Ender-3/MKS Robin E3/V1.1/Configuration.h | 4 ++-- .../examples/Creality/Ender-3/MKS Robin E3P/Configuration.h | 4 ++-- .../Creality/Ender-3/TH3D EZBoard Lite V2/Configuration.h | 4 ++-- config/examples/Creality/Ender-4/Configuration.h | 4 ++-- .../Creality/Ender-5 Plus/BigTreeTech SKR 3/Configuration.h | 4 ++-- .../Creality 4.2.2 (RELOADED UI)/Configuration.h | 4 ++-- .../Ender-5 Plus/CrealityV1 (ORIGIN UI)/Configuration.h | 4 ++-- .../Ender-5 Plus/CrealityV1 (RELOADED UI)/Configuration.h | 4 ++-- .../Ender-5 Pro/BigTreeTech SKR E3 Turbo/Configuration.h | 4 ++-- .../Ender-5 Pro/BigTreeTech SKR Mini E3 1.2/Configuration.h | 4 ++-- .../BigTreeTech SKR Mini E3 2.0 with BLTouch/Configuration.h | 4 ++-- .../Configuration.h | 4 ++-- .../examples/Creality/Ender-5 Pro/CrealityV1/Configuration.h | 4 ++-- .../Creality/Ender-5 Pro/CrealityV422/Configuration.h | 4 ++-- .../Creality/Ender-5 Pro/CrealityV427/Configuration.h | 4 ++-- config/examples/Creality/Ender-5 S1/Configuration.h | 4 ++-- .../BigTreeTech SKR E3 Turbo with BLTouch/Configuration.h | 4 ++-- .../Ender-5/BigTreeTech SKR E3 Turbo/Configuration.h | 4 ++-- .../Ender-5/BigTreeTech SKR Mini E3 1.2/Configuration.h | 4 ++-- .../Ender-5/BigTreeTech SKR Mini E3 2.0/Configuration.h | 4 ++-- .../BigTreeTech SKR Mini E3 3.0 with BLTouch/Configuration.h | 4 ++-- .../Creality/Ender-5/Creality free-runs/Configuration.h | 4 ++-- config/examples/Creality/Ender-5/CrealityV1/Configuration.h | 4 ++-- .../Ender-5/CrealityV427 with BLTouch/Configuration.h | 4 ++-- .../examples/Creality/Ender-5/CrealityV427/Configuration.h | 4 ++-- config/examples/Creality/Ender-6/Configuration.h | 4 ++-- config/examples/Dagoma/Disco Ultimate/Configuration.h | 4 ++-- config/examples/Daycom/3DP-100/Configuration.h | 4 ++-- config/examples/E3D/BigBox Dual/Configuration.h | 5 +++-- .../examples/EXP3D/Imprimante multifonction/Configuration.h | 4 ++-- config/examples/EasyThreeD/ET4000PLUS/Configuration.h | 4 ++-- config/examples/Eazao/Zero/Configuration.h | 4 ++-- config/examples/Einstart-S/Configuration.h | 4 ++-- config/examples/Elegoo/Neptune 2/Configuration.h | 4 ++-- config/examples/Eryone/Thinker SE/Configuration.h | 4 ++-- config/examples/Eryone/Thinker V2/Configuration.h | 4 ++-- config/examples/FYSETC/AIO_II/Configuration.h | 4 ++-- config/examples/FYSETC/F6_13/Configuration.h | 4 ++-- config/examples/FYSETC/S6/Configuration.h | 4 ++-- config/examples/Felix/DUAL/Configuration.h | 4 ++-- config/examples/Felix/Single/Configuration.h | 4 ++-- config/examples/FlashForge/Creator 2X/Configuration.h | 4 ++-- config/examples/FlashForge/CreatorPro/Configuration.h | 4 ++-- .../examples/FlyingBear/FlyingBearGhost_v3/Configuration.h | 4 ++-- config/examples/FlyingBear/P902/Configuration.h | 4 ++-- config/examples/FlyingBear/P905H/Configuration.h | 4 ++-- config/examples/FoamCutter/generic/Configuration.h | 4 ++-- config/examples/FoamCutter/rcKeith/Configuration.h | 4 ++-- config/examples/FolgerTech/FT-5 R2/Configuration.h | 4 ++-- config/examples/FolgerTech/i3-2020/Configuration.h | 4 ++-- config/examples/Formbot/Raptor/Configuration.h | 4 ++-- config/examples/Geeetech/A10/Configuration.h | 4 ++-- config/examples/Geeetech/A10D/Configuration.h | 4 ++-- config/examples/Geeetech/A10M/Stock LCD/Configuration.h | 4 ++-- config/examples/Geeetech/A10M/YHCB2004_V4.1/Configuration.h | 4 ++-- config/examples/Geeetech/A10PRO/Configuration.h | 4 ++-- config/examples/Geeetech/A10T/Stock LCD/Configuration.h | 4 ++-- config/examples/Geeetech/A10T/YHCB2004_V4.1/Configuration.h | 4 ++-- config/examples/Geeetech/A20/Configuration.h | 4 ++-- config/examples/Geeetech/A20M/Configuration.h | 4 ++-- config/examples/Geeetech/A20T/Configuration.h | 4 ++-- config/examples/Geeetech/A30/Configuration.h | 4 ++-- config/examples/Geeetech/A30M/Configuration.h | 4 ++-- config/examples/Geeetech/A30T/Configuration.h | 4 ++-- config/examples/Geeetech/D200/Configuration.h | 4 ++-- config/examples/Geeetech/Duplicator5/Configuration.h | 4 ++-- config/examples/Geeetech/E180/Configuration.h | 4 ++-- config/examples/Geeetech/GT2560/Configuration.h | 4 ++-- config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h | 4 ++-- config/examples/Geeetech/M201/Configuration.h | 4 ++-- config/examples/Geeetech/MeCreator2/Configuration.h | 4 ++-- config/examples/Geeetech/Me_creator/Configuration.h | 4 ++-- config/examples/Geeetech/Me_ducer/Configuration.h | 4 ++-- config/examples/Geeetech/PI3A PRO/Configuration.h | 4 ++-- .../examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h | 4 ++-- .../examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h | 4 ++-- config/examples/Geeetech/Prusa i3 Pro C/Configuration.h | 4 ++-- config/examples/Geeetech/Prusa i3 Pro W/Configuration.h | 4 ++-- config/examples/HMS434/Configuration.h | 4 ++-- config/examples/Hictop/3DP-17/Configuration.h | 4 ++-- config/examples/Infitary/i3-M508/Configuration.h | 4 ++-- config/examples/Intamsys/FunmatHT 4988/Configuration.h | 4 ++-- config/examples/JGAurora/A1/Configuration.h | 4 ++-- config/examples/JGAurora/A3/Configuration.h | 4 ++-- config/examples/JGAurora/A5/Configuration.h | 4 ++-- config/examples/JGAurora/A5S/Configuration.h | 4 ++-- config/examples/JGAurora/Magic/Configuration.h | 4 ++-- config/examples/Kingroon/KP3/Configuration.h | 4 ++-- config/examples/Kingroon/KP3S/Configuration.h | 4 ++-- config/examples/Kingroon/KP3S_Pro/Configuration.h | 4 ++-- config/examples/Kingroon/KP5L-DIY/Configuration.h | 4 ++-- config/examples/Labists/ET4/Configuration.h | 4 ++-- config/examples/Longer/LK5/Configuration.h | 4 ++-- config/examples/LulzBot/TAZ4/Configuration.h | 4 ++-- config/examples/MBot/Cube/Configuration.h | 4 ++-- config/examples/MZ3D/360/Configuration.h | 4 ++-- config/examples/MakerBot/Replicator Dual/Configuration.h | 4 ++-- config/examples/MakerBot/Replicator Single/Configuration.h | 4 ++-- config/examples/MakerFarm/Pegasus 12/Configuration.h | 4 ++-- config/examples/MakerGear/M2 Rev H/Configuration.h | 4 ++-- config/examples/MakerParts/Configuration.h | 4 ++-- config/examples/MakerTech3D/Proforge2sDual/Configuration.h | 4 ++-- config/examples/Malyan/M150/Configuration.h | 2 +- config/examples/Malyan/M180/Configuration.h | 4 ++-- config/examples/Malyan/M200/Configuration.h | 4 ++-- config/examples/Materia101/Configuration.h | 4 ++-- config/examples/Micromake/C1/basic/Configuration.h | 4 ++-- config/examples/Micromake/C1/enhanced/Configuration.h | 4 ++-- config/examples/Mks/Robin/Configuration.h | 4 ++-- config/examples/Mks/Robin_Lite3/Configuration.h | 4 ++-- config/examples/Mks/Robin_Pro/Configuration.h | 4 ++-- config/examples/Mks/Sbase/Configuration.h | 4 ++-- config/examples/Modix/Big60/Configuration.h | 4 ++-- config/examples/Nextion/Configuration.h | 4 ++-- config/examples/ORD Bot/Hadron/Sanguinololu/Configuration.h | 4 ++-- config/examples/Opulo/Lumen_REV3/Configuration.h | 4 ++-- config/examples/Opulo/Lumen_REV4/Configuration.h | 4 ++-- config/examples/Opulo/Lumen_REV5/Configuration.h | 4 ++-- config/examples/Ortur 4/Configuration.h | 4 ++-- config/examples/Polargraph/Configuration.h | 4 ++-- config/examples/Printrbot/PrintrboardG2/Configuration.h | 4 ++-- config/examples/Printrbot/Simple Metal RevD/Configuration.h | 4 ++-- config/examples/Printrbot/Simple_Metal_RevF6/Configuration.h | 4 ++-- config/examples/Prusa/MK3/Configuration.h | 4 ++-- .../examples/Prusa/MK3S-BigTreeTech-BTT002/Configuration.h | 4 ++-- config/examples/Qidi/Qidi 1/Configuration.h | 4 ++-- config/examples/Raiscube/A8r/Configuration.h | 4 ++-- config/examples/RapideLite/RL200/Configuration.h | 4 ++-- config/examples/Renkforce/RF100/Configuration.h | 4 ++-- config/examples/Renkforce/RF100XL/Configuration.h | 4 ++-- config/examples/Renkforce/RF100v2/Configuration.h | 4 ++-- config/examples/RepRapPro/Huxley/Configuration.h | 4 ++-- config/examples/RepRapWorld/Megatronics/Configuration.h | 4 ++-- config/examples/RepRapWorld/Minitronics11/Configuration.h | 4 ++-- .../examples/RepRapWorld/Minitronics20/CNC/Configuration.h | 4 ++-- config/examples/RigidBot/Configuration.h | 4 ++-- config/examples/Robo3D/R1+/Configuration.h | 4 ++-- config/examples/Rolohaun/Rook MK1/Configuration.h | 4 ++-- config/examples/SCARA/MP_SCARA/Configuration.h | 4 ++-- config/examples/SCARA/Morgan/Configuration.h | 4 ++-- config/examples/STM32/Black_STM32F407VET6/Configuration.h | 4 ++-- config/examples/STM32/STM32F103RE/Configuration.h | 4 ++-- config/examples/Simax/Mi-M200/Configuration.h | 4 ++-- config/examples/Simulator/Configuration.h | 4 ++-- .../Sovol/SV-01/BigTreeTech SKR E3 Turbo/Configuration.h | 4 ++-- .../Sovol/SV-01/BigTreeTech SKR Mini E3 2.0/Configuration.h | 4 ++-- .../Sovol/SV-01/BigTreeTech SKR Mini E3 3.0/Configuration.h | 4 ++-- config/examples/Sovol/SV-01/CrealityV22/Configuration.h | 4 ++-- config/examples/Sovol/SV-01/CrealityV221/Configuration.h | 4 ++-- config/examples/Sovol/SV-02/Configuration.h | 4 ++-- config/examples/Sovol/SV-03/Configuration.h | 4 ++-- config/examples/Sovol/SV-05/Configuration.h | 4 ++-- config/examples/Sovol/SV-06 Plus/Configuration.h | 4 ++-- config/examples/Sovol/SV-06/Configuration.h | 4 ++-- config/examples/Sunlu/S8/Configuration.h | 4 ++-- config/examples/Sunlu/T3/Configuration.h | 4 ++-- config/examples/TPARA/AXEL_TPARA/Configuration.h | 4 ++-- config/examples/Tevo/Michelangelo/Configuration.h | 4 ++-- config/examples/Tevo/Nereus/Configuration.h | 4 ++-- config/examples/Tevo/Tarantula Pro/MKS Gen_L/Configuration.h | 4 ++-- .../examples/Tevo/Tarantula Pro/MKS SGen_L/Configuration.h | 4 ++-- config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration.h | 4 ++-- config/examples/Tevo/Tornado/V2 (MKS Gen_L)/Configuration.h | 4 ++-- .../examples/Tinkerine/Ditto Pro/RAMPS 1.4/Configuration.h | 4 ++-- config/examples/TinyBoy2/Configuration.h | 4 ++-- .../examples/Tronxy/D01/CXY-v6-191017 board/Configuration.h | 4 ++-- config/examples/Tronxy/X1/Configuration.h | 4 ++-- config/examples/Tronxy/X3A/Configuration.h | 4 ++-- .../Tronxy/X5S-2E/Green Board (Chitu V5)/Configuration.h | 2 +- .../Tronxy/X5S-2E/Red Board (Tronxy 3.1.0)/Configuration.h | 4 ++-- config/examples/Tronxy/X5S/Configuration.h | 4 ++-- config/examples/Tronxy/X5SA Pro/Configuration.h | 4 ++-- config/examples/Tronxy/X5SA-2E/Configuration.h | 4 ++-- config/examples/Tronxy/X5SA/Configuration.h | 4 ++-- config/examples/Tronxy/XY100/Configuration.h | 4 ++-- config/examples/Tronxy/XY2-Pro/Configuration.h | 4 ++-- config/examples/Turnigy/Fabrikator/Configuration.h | 4 ++-- config/examples/Two Trees/BlueR Plus/Configuration.h | 4 ++-- config/examples/Two Trees/BlueR/BlueR V1/Configuration.h | 4 ++-- config/examples/Two Trees/BlueR/BlueR V2/Configuration.h | 4 ++-- config/examples/Two Trees/BlueR/BlueR V3/Configuration.h | 4 ++-- config/examples/Two Trees/SP-5_V3/Configuration.h | 4 ++-- .../Sapphire Plus/Sapphire Plus V2.1/Configuration.h | 2 +- .../Two Trees/Sapphire Plus/Sapphire Plus V2/Configuration.h | 2 +- config/examples/Two Trees/Sapphire Pro/Configuration.h | 4 ++-- config/examples/UltiMachine/Archim1/Configuration.h | 4 ++-- config/examples/UltiMachine/Archim2/Configuration.h | 4 ++-- config/examples/Ultimaker/Ultimaker 2+/Configuration.h | 4 ++-- config/examples/Ultimaker/Ultimaker 2/Configuration.h | 4 ++-- .../Ultimaker/Ultimaker Original (1.5.7)/Configuration.h | 4 ++-- .../Ultimaker Original Plus (2.1.1)/Configuration.h | 4 ++-- .../Ultimaker/Ultimaker Original Plus DXU/Configuration.h | 4 ++-- config/examples/VORONDesign/Configuration.h | 4 ++-- config/examples/Velleman/K8200 Upgraded/Configuration.h | 4 ++-- config/examples/Velleman/K8200/Configuration.h | 4 ++-- config/examples/Velleman/K8400/Dual-head/Configuration.h | 4 ++-- config/examples/Velleman/K8400/Single-head/Configuration.h | 4 ++-- .../Aquila/BigTreeTech SKR Mini E3 2.0/Configuration.h | 4 ++-- config/examples/WASP/PowerWASP/Configuration.h | 4 ++-- config/examples/Wanhao/Duplicator 4S/Configuration.h | 4 ++-- config/examples/Wanhao/Duplicator 6/Configuration.h | 4 ++-- config/examples/Wanhao/Duplicator 9/MK1/300/Configuration.h | 4 ++-- config/examples/Wanhao/Duplicator 9/MK1/400/Configuration.h | 4 ++-- config/examples/Wanhao/Duplicator 9/MK1/500/Configuration.h | 4 ++-- .../examples/Wanhao/Duplicator 9/MK1u2/300/Configuration.h | 4 ++-- .../examples/Wanhao/Duplicator 9/MK1u2/400/Configuration.h | 4 ++-- .../examples/Wanhao/Duplicator 9/MK1u2/500/Configuration.h | 4 ++-- config/examples/Wanhao/Duplicator 9/MK2/300/Configuration.h | 4 ++-- config/examples/Wanhao/Duplicator 9/MK2/400/Configuration.h | 4 ++-- config/examples/Wanhao/Duplicator 9/MK2/500/Configuration.h | 4 ++-- config/examples/Wanhao/Duplicator 9/MK3/300/Configuration.h | 4 ++-- config/examples/Wanhao/Duplicator 9/MK3/400/Configuration.h | 4 ++-- config/examples/Wanhao/Duplicator 9/MK3/500/Configuration.h | 4 ++-- config/examples/Wanhao/Duplicator i3 2.1/Configuration.h | 4 ++-- config/examples/Wanhao/Duplicator i3 Mini/Configuration.h | 4 ++-- config/examples/Wanhao/Duplicator i3 Plus/Configuration.h | 4 ++-- config/examples/Weedo/Tina2/V2/Configuration.h | 4 ++-- config/examples/Weedo/Tina2/V3/Configuration.h | 4 ++-- config/examples/Weistek/wt150/Configuration.h | 4 ++-- config/examples/Zonestar/P802M/Configuration.h | 4 ++-- .../BigTreeTech SKR 1.4 Turbo (A4988)/Configuration.h | 4 ++-- .../BigTreeTech SKR 1.4 Turbo (TMC2209)/Configuration.h | 4 ++-- .../delta/Anycubic/Kossel Linear Plus/Configuration.h | 2 +- config/examples/delta/Anycubic/Kossel/Configuration.h | 2 +- config/examples/delta/Anycubic/Predator/Configuration.h | 4 ++-- config/examples/delta/Dreammaker/Overlord/Configuration.h | 4 ++-- .../examples/delta/Dreammaker/Overlord_Pro/Configuration.h | 4 ++-- config/examples/delta/FLSUN/Q5-nano_v1/Configuration.h | 4 ++-- config/examples/delta/FLSUN/Q5-nano_v2/Configuration.h | 4 ++-- config/examples/delta/FLSUN/QQ-S/Configuration.h | 4 ++-- config/examples/delta/FLSUN/QQS-Pro/Configuration.h | 4 ++-- config/examples/delta/FLSUN/auto_calibrate/Configuration.h | 4 ++-- config/examples/delta/FLSUN/kossel/Configuration.h | 4 ++-- config/examples/delta/FLSUN/kossel_mini/Configuration.h | 4 ++-- config/examples/delta/Geeetech/G2/Configuration.h | 5 +++-- config/examples/delta/Geeetech/G2Pro/Configuration.h | 5 +++-- config/examples/delta/Geeetech/G2S/Configuration.h | 5 +++-- config/examples/delta/Geeetech/G2SPro/Configuration.h | 5 +++-- config/examples/delta/Geeetech/Rostock 301/Configuration.h | 4 ++-- config/examples/delta/Hatchbox_Alpha/Configuration.h | 4 ++-- config/examples/delta/MKS/SBASE/Configuration.h | 4 ++-- config/examples/delta/Malyan M300/Configuration.h | 5 +++-- .../delta/Micromake-D1/MKS-Gen-L-V2.1/Configuration.h | 4 ++-- config/examples/delta/Micromake-D1/RAMPS-1.4/Configuration.h | 4 ++-- config/examples/delta/Tevo Little Monster/Configuration.h | 4 ++-- config/examples/delta/Velleman/K8800/Configuration.h | 4 ++-- config/examples/delta/generic/Configuration.h | 4 ++-- config/examples/delta/kossel_clear/Configuration.h | 4 ++-- config/examples/delta/kossel_mini/Configuration.h | 4 ++-- config/examples/delta/kossel_pro/Configuration.h | 5 +++-- config/examples/delta/kossel_xl/Configuration.h | 4 ++-- config/examples/gCreate/gMax1.5+/Configuration.h | 4 ++-- .../linear_axes/Octopus 8 LINEAR_AXES/Configuration.h | 4 ++-- .../examples/linear_axes/RAMPS 5 LINEAR_AXES/Configuration.h | 4 ++-- config/examples/makibox/Configuration.h | 4 ++-- config/examples/tvrrug/Round2/Configuration.h | 4 ++-- 408 files changed, 813 insertions(+), 806 deletions(-) diff --git a/config/default/Configuration.h b/config/default/Configuration.h index 11c7258d9e..04b882411b 100644 --- a/config/default/Configuration.h +++ b/config/default/Configuration.h @@ -1671,7 +1671,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1707,7 +1707,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/3DFabXYZ/Migbot/Configuration.h b/config/examples/3DFabXYZ/Migbot/Configuration.h index e952e54fe4..da5bcaf0cd 100644 --- a/config/examples/3DFabXYZ/Migbot/Configuration.h +++ b/config/examples/3DFabXYZ/Migbot/Configuration.h @@ -1673,7 +1673,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1709,7 +1709,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 21, 61, 0 } +#define NOZZLE_TO_PROBE_OFFSET { 21, 61, 0 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/3DMatik/XL/Configuration.h b/config/examples/3DMatik/XL/Configuration.h index bae2ddc70b..8bcbf3ce88 100644 --- a/config/examples/3DMatik/XL/Configuration.h +++ b/config/examples/3DMatik/XL/Configuration.h @@ -1671,7 +1671,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1707,7 +1707,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 29, 0 } +#define NOZZLE_TO_PROBE_OFFSET { 10, 29, 0 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/ADIMLab/Gantry v1/Configuration.h b/config/examples/ADIMLab/Gantry v1/Configuration.h index a6f7b46d61..302c43abb5 100644 --- a/config/examples/ADIMLab/Gantry v1/Configuration.h +++ b/config/examples/ADIMLab/Gantry v1/Configuration.h @@ -1671,7 +1671,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1707,7 +1707,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/ADIMLab/Gantry v2/Configuration.h b/config/examples/ADIMLab/Gantry v2/Configuration.h index c43422bb62..82b19cf451 100644 --- a/config/examples/ADIMLab/Gantry v2/Configuration.h +++ b/config/examples/ADIMLab/Gantry v2/Configuration.h @@ -1671,7 +1671,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1707,7 +1707,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/Alfawise/U20-bltouch/Configuration.h b/config/examples/Alfawise/U20-bltouch/Configuration.h index 678eb000e0..649adbd176 100644 --- a/config/examples/Alfawise/U20-bltouch/Configuration.h +++ b/config/examples/Alfawise/U20-bltouch/Configuration.h @@ -1740,7 +1740,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1776,7 +1776,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { -35, -6, -0.5 } +#define NOZZLE_TO_PROBE_OFFSET { -35, -6, -0.5 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/Alfawise/U20/Configuration.h b/config/examples/Alfawise/U20/Configuration.h index 672a027af0..0b79ad5d38 100644 --- a/config/examples/Alfawise/U20/Configuration.h +++ b/config/examples/Alfawise/U20/Configuration.h @@ -1741,7 +1741,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1777,7 +1777,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/AliExpress/CL-260/Configuration.h b/config/examples/AliExpress/CL-260/Configuration.h index a1c5c84e94..95b4ef760b 100644 --- a/config/examples/AliExpress/CL-260/Configuration.h +++ b/config/examples/AliExpress/CL-260/Configuration.h @@ -1671,7 +1671,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1707,7 +1707,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/AliExpress/UM2pExt/Configuration.h b/config/examples/AliExpress/UM2pExt/Configuration.h index 4d81a9ca36..c91e2283ee 100644 --- a/config/examples/AliExpress/UM2pExt/Configuration.h +++ b/config/examples/AliExpress/UM2pExt/Configuration.h @@ -1672,7 +1672,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1708,7 +1708,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/Anet/A2/Configuration.h b/config/examples/Anet/A2/Configuration.h index 1cff88855f..49f84317ca 100644 --- a/config/examples/Anet/A2/Configuration.h +++ b/config/examples/Anet/A2/Configuration.h @@ -1671,7 +1671,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset diff --git a/config/examples/Anet/A2plus/Configuration.h b/config/examples/Anet/A2plus/Configuration.h index 7a94303353..6c3d665628 100644 --- a/config/examples/Anet/A2plus/Configuration.h +++ b/config/examples/Anet/A2plus/Configuration.h @@ -1671,7 +1671,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset diff --git a/config/examples/Anet/A6/Configuration.h b/config/examples/Anet/A6/Configuration.h index d4aa84c0fb..24dd28aeff 100644 --- a/config/examples/Anet/A6/Configuration.h +++ b/config/examples/Anet/A6/Configuration.h @@ -1688,7 +1688,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1733,7 +1733,7 @@ //#define NOZZLE_TO_PROBE_OFFSET { -1, 3, 0 } // ANET A6 with BLTouch/3D-Touch mounted right to the nozzle -#define NOZZLE_TO_PROBE_OFFSET { 39, 0, 0 } +#define NOZZLE_TO_PROBE_OFFSET { 39, 0, 0 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // ANET A6 with BLTouch/3D-Touch betwen Fan and Belt // (mount: https://github.com/ralf-e/ANET_A6_modifications/tree/master/A6_X-Axis) diff --git a/config/examples/Anet/A8/Configuration.h b/config/examples/Anet/A8/Configuration.h index 2f6f93cb0d..64afe31b70 100644 --- a/config/examples/Anet/A8/Configuration.h +++ b/config/examples/Anet/A8/Configuration.h @@ -1674,7 +1674,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1710,7 +1710,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 0, 0, 0 } +#define NOZZLE_TO_PROBE_OFFSET { 0, 0, 0 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/Anet/A8plus/Configuration.h b/config/examples/Anet/A8plus/Configuration.h index 1428326c22..2933600ceb 100644 --- a/config/examples/Anet/A8plus/Configuration.h +++ b/config/examples/Anet/A8plus/Configuration.h @@ -1673,7 +1673,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1709,7 +1709,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/Anet/A9/Configuration.h b/config/examples/Anet/A9/Configuration.h index f12f696cc2..1b431a416c 100644 --- a/config/examples/Anet/A9/Configuration.h +++ b/config/examples/Anet/A9/Configuration.h @@ -1671,7 +1671,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1707,7 +1707,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/Anet/E10/Configuration.h b/config/examples/Anet/E10/Configuration.h index ea5b5df789..a1d655ea18 100644 --- a/config/examples/Anet/E10/Configuration.h +++ b/config/examples/Anet/E10/Configuration.h @@ -1671,7 +1671,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1707,7 +1707,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/Anet/E16/BTT SKR 1.3/Configuration.h b/config/examples/Anet/E16/BTT SKR 1.3/Configuration.h index b2aa6062a9..aab5c18fb9 100644 --- a/config/examples/Anet/E16/BTT SKR 1.3/Configuration.h +++ b/config/examples/Anet/E16/BTT SKR 1.3/Configuration.h @@ -1673,7 +1673,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1709,7 +1709,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/Anet/E16/Stock/Configuration.h b/config/examples/Anet/E16/Stock/Configuration.h index 1178f81730..4edfdd6f11 100644 --- a/config/examples/Anet/E16/Stock/Configuration.h +++ b/config/examples/Anet/E16/Stock/Configuration.h @@ -1673,7 +1673,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1709,7 +1709,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/Anet/ET4+/Configuration.h b/config/examples/Anet/ET4+/Configuration.h index a60f07d92c..a619535725 100644 --- a/config/examples/Anet/ET4+/Configuration.h +++ b/config/examples/Anet/ET4+/Configuration.h @@ -1677,7 +1677,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1713,7 +1713,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { -25, -8.5, 0 } +#define NOZZLE_TO_PROBE_OFFSET { -25, -8.5, 0 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/Anet/ET4-Pro/Configuration.h b/config/examples/Anet/ET4-Pro/Configuration.h index 76d177073c..c8aa0fe1dd 100644 --- a/config/examples/Anet/ET4-Pro/Configuration.h +++ b/config/examples/Anet/ET4-Pro/Configuration.h @@ -1677,7 +1677,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1713,7 +1713,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { -25, -8.5, 0 } +#define NOZZLE_TO_PROBE_OFFSET { -25, -8.5, 0 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/Anet/ET4/Configuration.h b/config/examples/Anet/ET4/Configuration.h index 60ba1debd7..edfa970a31 100644 --- a/config/examples/Anet/ET4/Configuration.h +++ b/config/examples/Anet/ET4/Configuration.h @@ -1677,7 +1677,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1713,7 +1713,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 0, 0, 0 } +#define NOZZLE_TO_PROBE_OFFSET { 0, 0, 0 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/Anet/ET4X/Configuration.h b/config/examples/Anet/ET4X/Configuration.h index fa2c3b019a..8167f1f15f 100644 --- a/config/examples/Anet/ET4X/Configuration.h +++ b/config/examples/Anet/ET4X/Configuration.h @@ -1677,7 +1677,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1713,7 +1713,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { -25, -8.5, 0 } +#define NOZZLE_TO_PROBE_OFFSET { -25, -8.5, 0 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/Anet/ET5-Pro/Configuration.h b/config/examples/Anet/ET5-Pro/Configuration.h index c846801ac4..87711514f8 100644 --- a/config/examples/Anet/ET5-Pro/Configuration.h +++ b/config/examples/Anet/ET5-Pro/Configuration.h @@ -1671,7 +1671,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1707,7 +1707,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { -25, -8.5, 0 } +#define NOZZLE_TO_PROBE_OFFSET { -25, -8.5, 0 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/Anet/ET5/Configuration.h b/config/examples/Anet/ET5/Configuration.h index be5c6a7978..4481132a1e 100644 --- a/config/examples/Anet/ET5/Configuration.h +++ b/config/examples/Anet/ET5/Configuration.h @@ -1671,7 +1671,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1707,7 +1707,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { -25, -8.5, 0 } +#define NOZZLE_TO_PROBE_OFFSET { -25, -8.5, 0 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/Anet/ET5X/Configuration.h b/config/examples/Anet/ET5X/Configuration.h index 5b2ac65bd9..c13aa020ea 100644 --- a/config/examples/Anet/ET5X/Configuration.h +++ b/config/examples/Anet/ET5X/Configuration.h @@ -1671,7 +1671,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1707,7 +1707,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { -25, -8.5, 0 } +#define NOZZLE_TO_PROBE_OFFSET { -25, -8.5, 0 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/AnyCubic/Chiron/Configuration.h b/config/examples/AnyCubic/Chiron/Configuration.h index f4ee1b9128..4abd61cf96 100644 --- a/config/examples/AnyCubic/Chiron/Configuration.h +++ b/config/examples/AnyCubic/Chiron/Configuration.h @@ -1675,7 +1675,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1711,7 +1711,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 0, 0, -15 } +#define NOZZLE_TO_PROBE_OFFSET { 0, 0, -15 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/AnyCubic/Mega Zero 2.0/Anycubic V1/Configuration.h b/config/examples/AnyCubic/Mega Zero 2.0/Anycubic V1/Configuration.h index 8273959f29..d896363efc 100644 --- a/config/examples/AnyCubic/Mega Zero 2.0/Anycubic V1/Configuration.h +++ b/config/examples/AnyCubic/Mega Zero 2.0/Anycubic V1/Configuration.h @@ -1672,7 +1672,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1708,7 +1708,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { -40, -10, 2 } +#define NOZZLE_TO_PROBE_OFFSET { -40, -10, 2 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/AnyCubic/Mega Zero/Anycubic V1/Configuration.h b/config/examples/AnyCubic/Mega Zero/Anycubic V1/Configuration.h index a0b094d1bb..a81203317a 100644 --- a/config/examples/AnyCubic/Mega Zero/Anycubic V1/Configuration.h +++ b/config/examples/AnyCubic/Mega Zero/Anycubic V1/Configuration.h @@ -1672,7 +1672,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1708,7 +1708,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { -40, -10, 2 } +#define NOZZLE_TO_PROBE_OFFSET { -40, -10, 2 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/AnyCubic/Mega Zero/BigTreeTech SKR Mini MZ V1.0/Configuration.h b/config/examples/AnyCubic/Mega Zero/BigTreeTech SKR Mini MZ V1.0/Configuration.h index 6758c5d622..a3982ded38 100644 --- a/config/examples/AnyCubic/Mega Zero/BigTreeTech SKR Mini MZ V1.0/Configuration.h +++ b/config/examples/AnyCubic/Mega Zero/BigTreeTech SKR Mini MZ V1.0/Configuration.h @@ -1671,7 +1671,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1707,7 +1707,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { -40, -10, 2 } +#define NOZZLE_TO_PROBE_OFFSET { -40, -10, 2 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/AnyCubic/Vyper/Configuration.h b/config/examples/AnyCubic/Vyper/Configuration.h index ed3181b187..fb2b35a68c 100644 --- a/config/examples/AnyCubic/Vyper/Configuration.h +++ b/config/examples/AnyCubic/Vyper/Configuration.h @@ -1671,7 +1671,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1707,7 +1707,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 0, 0, 0 } +#define NOZZLE_TO_PROBE_OFFSET { 0, 0, 0 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/AnyCubic/i3 Mega/Trigorilla AVR/Configuration.h b/config/examples/AnyCubic/i3 Mega/Trigorilla AVR/Configuration.h index 3bfedb24e5..741f3cae3c 100644 --- a/config/examples/AnyCubic/i3 Mega/Trigorilla AVR/Configuration.h +++ b/config/examples/AnyCubic/i3 Mega/Trigorilla AVR/Configuration.h @@ -1720,7 +1720,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1756,7 +1756,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 0, -23, -1.54 } +#define NOZZLE_TO_PROBE_OFFSET { 0, -23, -1.54 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/AnyCubic/i3 Mega/Trigorilla Pro STM32/Configuration.h b/config/examples/AnyCubic/i3 Mega/Trigorilla Pro STM32/Configuration.h index 480388fcf3..4c664576bc 100644 --- a/config/examples/AnyCubic/i3 Mega/Trigorilla Pro STM32/Configuration.h +++ b/config/examples/AnyCubic/i3 Mega/Trigorilla Pro STM32/Configuration.h @@ -1682,7 +1682,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1718,7 +1718,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 0, -23, -1.54 } +#define NOZZLE_TO_PROBE_OFFSET { 0, -23, -1.54 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/AnyCubic/i3/Configuration.h b/config/examples/AnyCubic/i3/Configuration.h index 7880ac604d..1d19bac35e 100644 --- a/config/examples/AnyCubic/i3/Configuration.h +++ b/config/examples/AnyCubic/i3/Configuration.h @@ -1671,7 +1671,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1707,7 +1707,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 75, 5, -2 } +#define NOZZLE_TO_PROBE_OFFSET { 75, 5, -2 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/ArmEd/Configuration.h b/config/examples/ArmEd/Configuration.h index e61f45993a..451e210772 100644 --- a/config/examples/ArmEd/Configuration.h +++ b/config/examples/ArmEd/Configuration.h @@ -1672,7 +1672,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1708,7 +1708,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/Artillery/Genius Pro/Configuration.h b/config/examples/Artillery/Genius Pro/Configuration.h index 2632bb5749..27b2e0820a 100644 --- a/config/examples/Artillery/Genius Pro/Configuration.h +++ b/config/examples/Artillery/Genius Pro/Configuration.h @@ -1671,7 +1671,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1707,7 +1707,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 27.25, -12.8, -1 } +#define NOZZLE_TO_PROBE_OFFSET { 27.25, -12.8, -1 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/Artillery/Genius/BLTouch/Configuration.h b/config/examples/Artillery/Genius/BLTouch/Configuration.h index 707536063c..c0f8ece1e7 100644 --- a/config/examples/Artillery/Genius/BLTouch/Configuration.h +++ b/config/examples/Artillery/Genius/BLTouch/Configuration.h @@ -1671,7 +1671,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1707,7 +1707,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 25.4, -26.4, -1 } +#define NOZZLE_TO_PROBE_OFFSET { 25.4, -26.4, -1 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/Artillery/Genius/V1/Configuration.h b/config/examples/Artillery/Genius/V1/Configuration.h index d3e3cc814e..87011682e5 100644 --- a/config/examples/Artillery/Genius/V1/Configuration.h +++ b/config/examples/Artillery/Genius/V1/Configuration.h @@ -1671,7 +1671,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1707,7 +1707,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/Artillery/Hornet/Configuration.h b/config/examples/Artillery/Hornet/Configuration.h index 45d7962128..d95725a702 100644 --- a/config/examples/Artillery/Hornet/Configuration.h +++ b/config/examples/Artillery/Hornet/Configuration.h @@ -1671,7 +1671,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1707,7 +1707,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/Artillery/Sidewinder X1/0.9 BMG - E3D V6/Configuration.h b/config/examples/Artillery/Sidewinder X1/0.9 BMG - E3D V6/Configuration.h index e872a16088..22e730780a 100644 --- a/config/examples/Artillery/Sidewinder X1/0.9 BMG - E3D V6/Configuration.h +++ b/config/examples/Artillery/Sidewinder X1/0.9 BMG - E3D V6/Configuration.h @@ -1687,7 +1687,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1723,7 +1723,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/Artillery/Sidewinder X1/V1/Configuration.h b/config/examples/Artillery/Sidewinder X1/V1/Configuration.h index 8941de12b4..8b65e2d6a3 100644 --- a/config/examples/Artillery/Sidewinder X1/V1/Configuration.h +++ b/config/examples/Artillery/Sidewinder X1/V1/Configuration.h @@ -1671,7 +1671,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1707,7 +1707,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/Artillery/Sidewinder X2/Configuration.h b/config/examples/Artillery/Sidewinder X2/Configuration.h index 605f311935..70b51567c7 100644 --- a/config/examples/Artillery/Sidewinder X2/Configuration.h +++ b/config/examples/Artillery/Sidewinder X2/Configuration.h @@ -1671,7 +1671,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1707,7 +1707,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 27.25, -12.8, -2 } +#define NOZZLE_TO_PROBE_OFFSET { 27.25, -12.8, -2 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/Azteeg/X5GT/Configuration.h b/config/examples/Azteeg/X5GT/Configuration.h index d15c235044..e1e91cfd59 100644 --- a/config/examples/Azteeg/X5GT/Configuration.h +++ b/config/examples/Azteeg/X5GT/Configuration.h @@ -1671,7 +1671,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1707,7 +1707,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/BIBO/TouchX/cyclops/Configuration.h b/config/examples/BIBO/TouchX/cyclops/Configuration.h index 68eb6cdf0a..0e99b79eb3 100644 --- a/config/examples/BIBO/TouchX/cyclops/Configuration.h +++ b/config/examples/BIBO/TouchX/cyclops/Configuration.h @@ -1671,7 +1671,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1707,7 +1707,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/BIBO/TouchX/default - BLTouch/Configuration.h b/config/examples/BIBO/TouchX/default - BLTouch/Configuration.h index 003c0efa8b..6e2198b4ef 100644 --- a/config/examples/BIBO/TouchX/default - BLTouch/Configuration.h +++ b/config/examples/BIBO/TouchX/default - BLTouch/Configuration.h @@ -1672,7 +1672,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1708,7 +1708,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 55, 50, -4 } +#define NOZZLE_TO_PROBE_OFFSET { 55, 50, -4 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/BIBO/TouchX/default/Configuration.h b/config/examples/BIBO/TouchX/default/Configuration.h index 01f1d34340..5d259363a2 100644 --- a/config/examples/BIBO/TouchX/default/Configuration.h +++ b/config/examples/BIBO/TouchX/default/Configuration.h @@ -1671,7 +1671,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1707,7 +1707,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/BIQU/B1 SE Plus/Configuration.h b/config/examples/BIQU/B1 SE Plus/Configuration.h index 0067b91fb1..4c2b0bc066 100644 --- a/config/examples/BIQU/B1 SE Plus/Configuration.h +++ b/config/examples/BIQU/B1 SE Plus/Configuration.h @@ -1669,7 +1669,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1705,7 +1705,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 0, 0, 0.2 } +#define NOZZLE_TO_PROBE_OFFSET { 0, 0, 0.2 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/BIQU/B1 SE/Configuration.h b/config/examples/BIQU/B1 SE/Configuration.h index e881e181a2..04c7917c97 100644 --- a/config/examples/BIQU/B1 SE/Configuration.h +++ b/config/examples/BIQU/B1 SE/Configuration.h @@ -1669,7 +1669,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1705,7 +1705,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 0, 0, 0.2 } +#define NOZZLE_TO_PROBE_OFFSET { 0, 0, 0.2 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/BIQU/B1/Configuration.h b/config/examples/BIQU/B1/Configuration.h index e5e1e488c3..fbded4f828 100644 --- a/config/examples/BIQU/B1/Configuration.h +++ b/config/examples/BIQU/B1/Configuration.h @@ -1680,7 +1680,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1716,7 +1716,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 24, -47, -1.5 } +#define NOZZLE_TO_PROBE_OFFSET { 24, -47, -1.5 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/BIQU/BX/all-metal-hotend/Configuration.h b/config/examples/BIQU/BX/all-metal-hotend/Configuration.h index 6dfcfdb262..95f91b7fc4 100644 --- a/config/examples/BIQU/BX/all-metal-hotend/Configuration.h +++ b/config/examples/BIQU/BX/all-metal-hotend/Configuration.h @@ -1693,7 +1693,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1729,7 +1729,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { -30.1, 26.78, 0 } +#define NOZZLE_TO_PROBE_OFFSET { -30.1, 26.78, 0 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/BIQU/BX/base/Configuration.h b/config/examples/BIQU/BX/base/Configuration.h index 707dfc56d3..53fe5f2978 100644 --- a/config/examples/BIQU/BX/base/Configuration.h +++ b/config/examples/BIQU/BX/base/Configuration.h @@ -1693,7 +1693,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1729,7 +1729,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { -30.1, 26.78, 0 } +#define NOZZLE_TO_PROBE_OFFSET { -30.1, 26.78, 0 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/BIQU/Hurakan/Configuration.h b/config/examples/BIQU/Hurakan/Configuration.h index 6c96dd91bf..d496e1df5e 100644 --- a/config/examples/BIQU/Hurakan/Configuration.h +++ b/config/examples/BIQU/Hurakan/Configuration.h @@ -1674,7 +1674,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1710,7 +1710,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 0, -30.0, 0 } +#define NOZZLE_TO_PROBE_OFFSET { 0, -30.0, 0 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/BIQU/Thunder Standard/Configuration.h b/config/examples/BIQU/Thunder Standard/Configuration.h index 996ecc7f44..2aa8b195ad 100644 --- a/config/examples/BIQU/Thunder Standard/Configuration.h +++ b/config/examples/BIQU/Thunder Standard/Configuration.h @@ -1671,7 +1671,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1707,7 +1707,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 0, 0, -0.2 } +#define NOZZLE_TO_PROBE_OFFSET { 0, 0, -0.2 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/BQ/Hephestos/Configuration.h b/config/examples/BQ/Hephestos/Configuration.h index db3e24341f..9fa58b7ef4 100644 --- a/config/examples/BQ/Hephestos/Configuration.h +++ b/config/examples/BQ/Hephestos/Configuration.h @@ -1672,7 +1672,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1708,7 +1708,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { -25, -29, -12.35 } +#define NOZZLE_TO_PROBE_OFFSET { -25, -29, -12.35 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/BQ/Hephestos_2/Configuration.h b/config/examples/BQ/Hephestos_2/Configuration.h index 88e5e893b5..ec3de8c27e 100644 --- a/config/examples/BQ/Hephestos_2/Configuration.h +++ b/config/examples/BQ/Hephestos_2/Configuration.h @@ -1685,7 +1685,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1721,7 +1721,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 34, 15, 0 } +#define NOZZLE_TO_PROBE_OFFSET { 34, 15, 0 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/BQ/WITBOX/Configuration.h b/config/examples/BQ/WITBOX/Configuration.h index b8149a8cfc..5a535ab170 100644 --- a/config/examples/BQ/WITBOX/Configuration.h +++ b/config/examples/BQ/WITBOX/Configuration.h @@ -1672,7 +1672,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1708,7 +1708,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { -25, -29, -12.35 } +#define NOZZLE_TO_PROBE_OFFSET { -25, -29, -12.35 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/CNC/miniRambo/Configuration.h b/config/examples/CNC/miniRambo/Configuration.h index d4db0fdadd..504a2e0bb2 100644 --- a/config/examples/CNC/miniRambo/Configuration.h +++ b/config/examples/CNC/miniRambo/Configuration.h @@ -1672,7 +1672,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1708,7 +1708,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/CTC/A13/Configuration.h b/config/examples/CTC/A13/Configuration.h index 86e55202b4..eb32440783 100644 --- a/config/examples/CTC/A13/Configuration.h +++ b/config/examples/CTC/A13/Configuration.h @@ -1672,7 +1672,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1708,7 +1708,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/CTC/Bizer/Configuration.h b/config/examples/CTC/Bizer/Configuration.h index beeb90619a..f4302b0e76 100644 --- a/config/examples/CTC/Bizer/Configuration.h +++ b/config/examples/CTC/Bizer/Configuration.h @@ -1671,7 +1671,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1707,7 +1707,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/CTC/i3 2560 Rev A/no probe/Configuration.h b/config/examples/CTC/i3 2560 Rev A/no probe/Configuration.h index 723f6e15d4..43e9692c60 100644 --- a/config/examples/CTC/i3 2560 Rev A/no probe/Configuration.h +++ b/config/examples/CTC/i3 2560 Rev A/no probe/Configuration.h @@ -1672,7 +1672,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1708,7 +1708,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/Cartesio/Configuration.h b/config/examples/Cartesio/Configuration.h index 00b73d332c..475a757c42 100644 --- a/config/examples/Cartesio/Configuration.h +++ b/config/examples/Cartesio/Configuration.h @@ -1687,7 +1687,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1723,7 +1723,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/Copymaster3D/300/Configuration.h b/config/examples/Copymaster3D/300/Configuration.h index e05ecd8053..8a5da308d7 100644 --- a/config/examples/Copymaster3D/300/Configuration.h +++ b/config/examples/Copymaster3D/300/Configuration.h @@ -1672,7 +1672,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1708,7 +1708,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/Copymaster3D/400/Configuration.h b/config/examples/Copymaster3D/400/Configuration.h index 1bb77dbe75..06db5f69d3 100644 --- a/config/examples/Copymaster3D/400/Configuration.h +++ b/config/examples/Copymaster3D/400/Configuration.h @@ -1671,7 +1671,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1707,7 +1707,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/Copymaster3D/500/Configuration.h b/config/examples/Copymaster3D/500/Configuration.h index 24dd720cbe..a45d178151 100644 --- a/config/examples/Copymaster3D/500/Configuration.h +++ b/config/examples/Copymaster3D/500/Configuration.h @@ -1672,7 +1672,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1708,7 +1708,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/Creality/CR-10 Max/Configuration.h b/config/examples/Creality/CR-10 Max/Configuration.h index 4726ac72ca..e0b8ed90fa 100644 --- a/config/examples/Creality/CR-10 Max/Configuration.h +++ b/config/examples/Creality/CR-10 Max/Configuration.h @@ -1671,7 +1671,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1707,7 +1707,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { -27, 0, 0 } +#define NOZZLE_TO_PROBE_OFFSET { -27, 0, 0 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/Creality/CR-10 Mini/BigTreeTech SKR Mini E3 2.0/Configuration.h b/config/examples/Creality/CR-10 Mini/BigTreeTech SKR Mini E3 2.0/Configuration.h index 131023e145..db5a9bf46e 100644 --- a/config/examples/Creality/CR-10 Mini/BigTreeTech SKR Mini E3 2.0/Configuration.h +++ b/config/examples/Creality/CR-10 Mini/BigTreeTech SKR Mini E3 2.0/Configuration.h @@ -1679,7 +1679,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1715,7 +1715,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { -38, -8, 0 } +#define NOZZLE_TO_PROBE_OFFSET { -38, -8, 0 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/Creality/CR-10 Mini/BigTreeTech SKR Mini E3 2.0/README.md b/config/examples/Creality/CR-10 Mini/BigTreeTech SKR Mini E3 2.0/README.md index 1345949ed9..9928261ea5 100644 --- a/config/examples/Creality/CR-10 Mini/BigTreeTech SKR Mini E3 2.0/README.md +++ b/config/examples/Creality/CR-10 Mini/BigTreeTech SKR Mini E3 2.0/README.md @@ -17,7 +17,7 @@ This configuration uses only the probe for Z homing. The Z-stop switch is NOT en Plug the BLTouch Black/White connector into the top two pins of the 5-pin Z-PROBE port with the white whire "up". Do not plug the connector in to the Z-MIN port where the limit switch was plugged in. ```cpp -#define NOZZLE_TO_PROBE_OFFSET { -38, -8, 0 } +#define NOZZLE_TO_PROBE_OFFSET { -38, -8, 0 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point ``` These are the offsets for a left-side mounted BL Touch on a Bullseye fan duct base. Change them as required for your particular BL Touch mount. diff --git a/config/examples/Creality/CR-10 Mini/BigTreeTech SKR Mini E3 3.0/Configuration.h b/config/examples/Creality/CR-10 Mini/BigTreeTech SKR Mini E3 3.0/Configuration.h index 18ac5870ed..554c6a689a 100644 --- a/config/examples/Creality/CR-10 Mini/BigTreeTech SKR Mini E3 3.0/Configuration.h +++ b/config/examples/Creality/CR-10 Mini/BigTreeTech SKR Mini E3 3.0/Configuration.h @@ -1679,7 +1679,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1715,7 +1715,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { -38, -8, 0 } +#define NOZZLE_TO_PROBE_OFFSET { -38, -8, 0 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/Creality/CR-10 Mini/BigTreeTech SKR Mini E3 3.0/README.md b/config/examples/Creality/CR-10 Mini/BigTreeTech SKR Mini E3 3.0/README.md index 1e8fee590f..6d3bcd15d3 100644 --- a/config/examples/Creality/CR-10 Mini/BigTreeTech SKR Mini E3 3.0/README.md +++ b/config/examples/Creality/CR-10 Mini/BigTreeTech SKR Mini E3 3.0/README.md @@ -17,7 +17,7 @@ This configuration uses only the probe for Z homing. The Z-stop switch is NOT en Plug the BLTouch Black/White connector into the top two pins of the 5-pin Z-PROBE port with the white whire "up". Do not plug the connector in to the Z-MIN port where the limit switch was plugged in. ```cpp -#define NOZZLE_TO_PROBE_OFFSET { -38, -8, 0 } +#define NOZZLE_TO_PROBE_OFFSET { -38, -8, 0 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point ``` These are the offsets for a left-side mounted BL Touch on a Bullseye fan duct base. Change them as required for your particular BL Touch mount. diff --git a/config/examples/Creality/CR-10 Mini/CrealityV1/Configuration.h b/config/examples/Creality/CR-10 Mini/CrealityV1/Configuration.h index 089d4e00ae..e2fc1b7ca7 100644 --- a/config/examples/Creality/CR-10 Mini/CrealityV1/Configuration.h +++ b/config/examples/Creality/CR-10 Mini/CrealityV1/Configuration.h @@ -1680,7 +1680,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1716,7 +1716,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/Creality/CR-10 Mini/MEEB-3DP/Configuration.h b/config/examples/Creality/CR-10 Mini/MEEB-3DP/Configuration.h index 96c54a3aed..f789234c62 100644 --- a/config/examples/Creality/CR-10 Mini/MEEB-3DP/Configuration.h +++ b/config/examples/Creality/CR-10 Mini/MEEB-3DP/Configuration.h @@ -1671,7 +1671,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1707,7 +1707,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/Creality/CR-10 S4/CrealityV1/Configuration.h b/config/examples/Creality/CR-10 S4/CrealityV1/Configuration.h index fcb92755a0..93d885b631 100644 --- a/config/examples/Creality/CR-10 S4/CrealityV1/Configuration.h +++ b/config/examples/Creality/CR-10 S4/CrealityV1/Configuration.h @@ -1672,7 +1672,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1708,7 +1708,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 1.2 with TFT35 E3 V3.0/Configuration.h b/config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 1.2 with TFT35 E3 V3.0/Configuration.h index 8e9793af07..88054ce87f 100644 --- a/config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 1.2 with TFT35 E3 V3.0/Configuration.h +++ b/config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 1.2 with TFT35 E3 V3.0/Configuration.h @@ -1672,7 +1672,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1708,7 +1708,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 v3/Configuration.h b/config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 v3/Configuration.h index ab9ca43830..af5081d750 100644 --- a/config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 v3/Configuration.h +++ b/config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 v3/Configuration.h @@ -1671,7 +1671,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1707,7 +1707,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { -44, -7, 0 } +#define NOZZLE_TO_PROBE_OFFSET { -44, -7, 0 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/Creality/CR-10 S5/CrealityV1/Configuration.h b/config/examples/Creality/CR-10 S5/CrealityV1/Configuration.h index 996bf61ef5..c166d1a7ec 100644 --- a/config/examples/Creality/CR-10 S5/CrealityV1/Configuration.h +++ b/config/examples/Creality/CR-10 S5/CrealityV1/Configuration.h @@ -1672,7 +1672,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1708,7 +1708,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/Creality/CR-10 S5/CrealityV2.2 - BLTouch/Configuration.h b/config/examples/Creality/CR-10 S5/CrealityV2.2 - BLTouch/Configuration.h index 719c0a3fe3..ea060457bf 100644 --- a/config/examples/Creality/CR-10 S5/CrealityV2.2 - BLTouch/Configuration.h +++ b/config/examples/Creality/CR-10 S5/CrealityV2.2 - BLTouch/Configuration.h @@ -1673,7 +1673,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1709,7 +1709,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/Creality/CR-10 S5/CrealityV427 - BLTouch/Configuration.h b/config/examples/Creality/CR-10 S5/CrealityV427 - BLTouch/Configuration.h index 5e9c99087e..9ebd0065b1 100644 --- a/config/examples/Creality/CR-10 S5/CrealityV427 - BLTouch/Configuration.h +++ b/config/examples/Creality/CR-10 S5/CrealityV427 - BLTouch/Configuration.h @@ -1673,7 +1673,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1709,7 +1709,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { -45, -5, -1.2 } +#define NOZZLE_TO_PROBE_OFFSET { -45, -5, -1.2 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/Creality/CR-10 V2/Configuration.h b/config/examples/Creality/CR-10 V2/Configuration.h index 2d74ed5b9a..b43e72b7c0 100644 --- a/config/examples/Creality/CR-10 V2/Configuration.h +++ b/config/examples/Creality/CR-10 V2/Configuration.h @@ -1689,7 +1689,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1725,7 +1725,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 47, 0, 0 } +#define NOZZLE_TO_PROBE_OFFSET { 47, 0, 0 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/Creality/CR-10 V3/BigTreeTech SKR Mini E3 v3/Configuration.h b/config/examples/Creality/CR-10 V3/BigTreeTech SKR Mini E3 v3/Configuration.h index 869b9297c3..19ee59df1e 100644 --- a/config/examples/Creality/CR-10 V3/BigTreeTech SKR Mini E3 v3/Configuration.h +++ b/config/examples/Creality/CR-10 V3/BigTreeTech SKR Mini E3 v3/Configuration.h @@ -1690,7 +1690,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1726,7 +1726,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 46, 2, 0 } +#define NOZZLE_TO_PROBE_OFFSET { 46, 2, 0 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/Creality/CR-10 V3/Stock/Configuration.h b/config/examples/Creality/CR-10 V3/Stock/Configuration.h index 04469943ca..7dfab76fa2 100644 --- a/config/examples/Creality/CR-10 V3/Stock/Configuration.h +++ b/config/examples/Creality/CR-10 V3/Stock/Configuration.h @@ -1690,7 +1690,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1726,7 +1726,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 46, 2, 0 } +#define NOZZLE_TO_PROBE_OFFSET { 46, 2, 0 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 2.0/Configuration.h b/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 2.0/Configuration.h index 47f8a412a2..3130887111 100644 --- a/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 2.0/Configuration.h +++ b/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 2.0/Configuration.h @@ -1670,7 +1670,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1706,7 +1706,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 3.0/Configuration.h b/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 3.0/Configuration.h index 43c82c809c..4b51dba479 100644 --- a/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 3.0/Configuration.h +++ b/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 3.0/Configuration.h @@ -1670,7 +1670,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1706,7 +1706,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/Creality/CR-10/CrealityV1/Configuration.h b/config/examples/Creality/CR-10/CrealityV1/Configuration.h index 6960e37048..b295b36b58 100644 --- a/config/examples/Creality/CR-10/CrealityV1/Configuration.h +++ b/config/examples/Creality/CR-10/CrealityV1/Configuration.h @@ -1671,7 +1671,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1707,7 +1707,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/Creality/CR-10S Pro/Configuration.h b/config/examples/Creality/CR-10S Pro/Configuration.h index a6e08858b2..ead0537f35 100644 --- a/config/examples/Creality/CR-10S Pro/Configuration.h +++ b/config/examples/Creality/CR-10S Pro/Configuration.h @@ -1671,7 +1671,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1707,7 +1707,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { -27, 0, 0 } +#define NOZZLE_TO_PROBE_OFFSET { -27, 0, 0 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/Creality/CR-10S/BigTreeTech SKR 1.4 Turbo TMC2209/Configuration.h b/config/examples/Creality/CR-10S/BigTreeTech SKR 1.4 Turbo TMC2209/Configuration.h index 4fb91018c2..7ecd96c56b 100644 --- a/config/examples/Creality/CR-10S/BigTreeTech SKR 1.4 Turbo TMC2209/Configuration.h +++ b/config/examples/Creality/CR-10S/BigTreeTech SKR 1.4 Turbo TMC2209/Configuration.h @@ -1671,7 +1671,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1707,7 +1707,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/Creality/CR-10S/BigTreeTech SKR 2.0 TMC2209/Configuration.h b/config/examples/Creality/CR-10S/BigTreeTech SKR 2.0 TMC2209/Configuration.h index 187b74e614..ef77d2f580 100644 --- a/config/examples/Creality/CR-10S/BigTreeTech SKR 2.0 TMC2209/Configuration.h +++ b/config/examples/Creality/CR-10S/BigTreeTech SKR 2.0 TMC2209/Configuration.h @@ -1671,7 +1671,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1707,7 +1707,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { -44, -7, 0 } +#define NOZZLE_TO_PROBE_OFFSET { -44, -7, 0 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/Creality/CR-10S/BigTreeTech SKR Mini E3 2.0/Configuration.h b/config/examples/Creality/CR-10S/BigTreeTech SKR Mini E3 2.0/Configuration.h index 1c1792d782..0c26e6d4d5 100644 --- a/config/examples/Creality/CR-10S/BigTreeTech SKR Mini E3 2.0/Configuration.h +++ b/config/examples/Creality/CR-10S/BigTreeTech SKR Mini E3 2.0/Configuration.h @@ -1672,7 +1672,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1708,7 +1708,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/Creality/CR-10S/BigTreeTech SKR Mini E3 3.0/Configuration.h b/config/examples/Creality/CR-10S/BigTreeTech SKR Mini E3 3.0/Configuration.h index 88aa5c45ad..7f98df420b 100644 --- a/config/examples/Creality/CR-10S/BigTreeTech SKR Mini E3 3.0/Configuration.h +++ b/config/examples/Creality/CR-10S/BigTreeTech SKR Mini E3 3.0/Configuration.h @@ -1672,7 +1672,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1708,7 +1708,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/Creality/CR-10S/BigTreeTech SKR Pro v1.2/Configuration.h b/config/examples/Creality/CR-10S/BigTreeTech SKR Pro v1.2/Configuration.h index 3e3811a51c..cf8e48969e 100644 --- a/config/examples/Creality/CR-10S/BigTreeTech SKR Pro v1.2/Configuration.h +++ b/config/examples/Creality/CR-10S/BigTreeTech SKR Pro v1.2/Configuration.h @@ -1671,7 +1671,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1707,7 +1707,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { -38, -8, -0.412 } +#define NOZZLE_TO_PROBE_OFFSET { -38, -8, -0.412 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/Creality/CR-10S/CrealityV1 - BLTouch/Configuration.h b/config/examples/Creality/CR-10S/CrealityV1 - BLTouch/Configuration.h index d58895d304..3759ca8c46 100644 --- a/config/examples/Creality/CR-10S/CrealityV1 - BLTouch/Configuration.h +++ b/config/examples/Creality/CR-10S/CrealityV1 - BLTouch/Configuration.h @@ -1671,7 +1671,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1707,7 +1707,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/Creality/CR-10S/CrealityV1/Configuration.h b/config/examples/Creality/CR-10S/CrealityV1/Configuration.h index 272c326e86..b333a7dab9 100644 --- a/config/examples/Creality/CR-10S/CrealityV1/Configuration.h +++ b/config/examples/Creality/CR-10S/CrealityV1/Configuration.h @@ -1671,7 +1671,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1707,7 +1707,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/Creality/CR-20 Pro/Configuration.h b/config/examples/Creality/CR-20 Pro/Configuration.h index 7675b67c21..b6d54c47a7 100644 --- a/config/examples/Creality/CR-20 Pro/Configuration.h +++ b/config/examples/Creality/CR-20 Pro/Configuration.h @@ -1672,7 +1672,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1708,7 +1708,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { -43, -5, 0 } +#define NOZZLE_TO_PROBE_OFFSET { -43, -5, 0 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/Creality/CR-20/RepRapWorld Minitronics20/Configuration.h b/config/examples/Creality/CR-20/RepRapWorld Minitronics20/Configuration.h index 47d04d1695..c242d5e0bd 100644 --- a/config/examples/Creality/CR-20/RepRapWorld Minitronics20/Configuration.h +++ b/config/examples/Creality/CR-20/RepRapWorld Minitronics20/Configuration.h @@ -1672,7 +1672,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1708,7 +1708,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/Creality/CR-20/Stock/Configuration.h b/config/examples/Creality/CR-20/Stock/Configuration.h index 716edbd0cb..169493bc40 100644 --- a/config/examples/Creality/CR-20/Stock/Configuration.h +++ b/config/examples/Creality/CR-20/Stock/Configuration.h @@ -1672,7 +1672,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1708,7 +1708,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/Creality/CR-30 PrintMill/Configuration.h b/config/examples/Creality/CR-30 PrintMill/Configuration.h index 00eaaaae26..3f6d63b603 100644 --- a/config/examples/Creality/CR-30 PrintMill/Configuration.h +++ b/config/examples/Creality/CR-30 PrintMill/Configuration.h @@ -1671,7 +1671,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1707,7 +1707,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/Creality/CR-6 SE/Configuration.h b/config/examples/Creality/CR-6 SE/Configuration.h index 89bfa78407..98d35a611c 100644 --- a/config/examples/Creality/CR-6 SE/Configuration.h +++ b/config/examples/Creality/CR-6 SE/Configuration.h @@ -1671,7 +1671,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1707,7 +1707,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 0, 0, 0.2 } +#define NOZZLE_TO_PROBE_OFFSET { 0, 0, 0.2 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/Creality/CR-8/Configuration.h b/config/examples/Creality/CR-8/Configuration.h index 6ff0f6d0d8..0fb4b70f57 100644 --- a/config/examples/Creality/CR-8/Configuration.h +++ b/config/examples/Creality/CR-8/Configuration.h @@ -1671,7 +1671,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1707,7 +1707,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/Creality/Ender-2 Pro/CrealityV24S4/Configuration.h b/config/examples/Creality/Ender-2 Pro/CrealityV24S4/Configuration.h index 493b558aff..e9d637e0c9 100644 --- a/config/examples/Creality/Ender-2 Pro/CrealityV24S4/Configuration.h +++ b/config/examples/Creality/Ender-2 Pro/CrealityV24S4/Configuration.h @@ -1671,7 +1671,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1707,7 +1707,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/Creality/Ender-2 Pro/CrealityV423/Configuration.h b/config/examples/Creality/Ender-2 Pro/CrealityV423/Configuration.h index 444785e1e4..e08666e33d 100644 --- a/config/examples/Creality/Ender-2 Pro/CrealityV423/Configuration.h +++ b/config/examples/Creality/Ender-2 Pro/CrealityV423/Configuration.h @@ -1671,7 +1671,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1707,7 +1707,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/Creality/Ender-2/Configuration.h b/config/examples/Creality/Ender-2/Configuration.h index ea24337a1a..ef9b6f1a89 100644 --- a/config/examples/Creality/Ender-2/Configuration.h +++ b/config/examples/Creality/Ender-2/Configuration.h @@ -1672,7 +1672,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1708,7 +1708,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/Creality/Ender-3 Max Neo/BigTreeTech SKR Mini E3 3.0/Configuration.h b/config/examples/Creality/Ender-3 Max Neo/BigTreeTech SKR Mini E3 3.0/Configuration.h index 7faef131bb..6097aa6170 100644 --- a/config/examples/Creality/Ender-3 Max Neo/BigTreeTech SKR Mini E3 3.0/Configuration.h +++ b/config/examples/Creality/Ender-3 Max Neo/BigTreeTech SKR Mini E3 3.0/Configuration.h @@ -1675,7 +1675,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1711,7 +1711,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { -36, -12, 0 } +#define NOZZLE_TO_PROBE_OFFSET { -36, -12, 0 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/Creality/Ender-3 Max Neo/CrealityV422/Configuration.h b/config/examples/Creality/Ender-3 Max Neo/CrealityV422/Configuration.h index 575bb53788..248ae85bc9 100644 --- a/config/examples/Creality/Ender-3 Max Neo/CrealityV422/Configuration.h +++ b/config/examples/Creality/Ender-3 Max Neo/CrealityV422/Configuration.h @@ -1672,7 +1672,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1708,7 +1708,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { -36, -12, 0 } +#define NOZZLE_TO_PROBE_OFFSET { -36, -12, 0 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/Creality/Ender-3 Max/Configuration.h b/config/examples/Creality/Ender-3 Max/Configuration.h index 37aaf35ac0..97e943c5ae 100644 --- a/config/examples/Creality/Ender-3 Max/Configuration.h +++ b/config/examples/Creality/Ender-3 Max/Configuration.h @@ -1675,7 +1675,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1711,7 +1711,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/Creality/Ender-3 Neo/Configuration.h b/config/examples/Creality/Ender-3 Neo/Configuration.h index 81eda0b138..12e1c38ac4 100644 --- a/config/examples/Creality/Ender-3 Neo/Configuration.h +++ b/config/examples/Creality/Ender-3 Neo/Configuration.h @@ -1672,7 +1672,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1708,7 +1708,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { -39, -10, -1 } +#define NOZZLE_TO_PROBE_OFFSET { -39, -10, -1 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR 1.4 Turbo/Configuration.h b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR 1.4 Turbo/Configuration.h index e5a9519108..f8871818a5 100644 --- a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR 1.4 Turbo/Configuration.h +++ b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR 1.4 Turbo/Configuration.h @@ -1671,7 +1671,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1707,7 +1707,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { -45, -8, 0 } +#define NOZZLE_TO_PROBE_OFFSET { -45, -8, 0 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.0/Configuration.h b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.0/Configuration.h index cd0f163434..befa3dfa8b 100644 --- a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.0/Configuration.h +++ b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.0/Configuration.h @@ -1671,7 +1671,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1707,7 +1707,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.2/Configuration.h b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.2/Configuration.h index 9e2ddb050f..afd314fef5 100644 --- a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.2/Configuration.h +++ b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.2/Configuration.h @@ -1671,7 +1671,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1707,7 +1707,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 2.0/Configuration.h b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 2.0/Configuration.h index 0f564f1d0b..74585d644b 100644 --- a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 2.0/Configuration.h +++ b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 2.0/Configuration.h @@ -1671,7 +1671,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1707,7 +1707,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 3.0/BLTouch/Configuration.h b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 3.0/BLTouch/Configuration.h index 1880001a33..5dcac8e858 100644 --- a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 3.0/BLTouch/Configuration.h +++ b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 3.0/BLTouch/Configuration.h @@ -1670,7 +1670,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1706,7 +1706,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { -45, -5, -1.2 } +#define NOZZLE_TO_PROBE_OFFSET { -45, -5, -1.2 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 3.0/base/Configuration.h b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 3.0/base/Configuration.h index 4f69c54595..cd2eaf683e 100644 --- a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 3.0/base/Configuration.h +++ b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 3.0/base/Configuration.h @@ -1670,7 +1670,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1706,7 +1706,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/Creality/Ender-3 Pro/Creality free-runs/Configuration.h b/config/examples/Creality/Ender-3 Pro/Creality free-runs/Configuration.h index 3ea4f79530..d8b621de47 100644 --- a/config/examples/Creality/Ender-3 Pro/Creality free-runs/Configuration.h +++ b/config/examples/Creality/Ender-3 Pro/Creality free-runs/Configuration.h @@ -1672,7 +1672,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1708,7 +1708,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/Creality/Ender-3 Pro/CrealityV1/Configuration.h b/config/examples/Creality/Ender-3 Pro/CrealityV1/Configuration.h index f9f361a9b2..d019550815 100644 --- a/config/examples/Creality/Ender-3 Pro/CrealityV1/Configuration.h +++ b/config/examples/Creality/Ender-3 Pro/CrealityV1/Configuration.h @@ -1672,7 +1672,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1708,7 +1708,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/Creality/Ender-3 Pro/CrealityV422/Configuration.h b/config/examples/Creality/Ender-3 Pro/CrealityV422/Configuration.h index 8d9034a327..9e27561b3f 100644 --- a/config/examples/Creality/Ender-3 Pro/CrealityV422/Configuration.h +++ b/config/examples/Creality/Ender-3 Pro/CrealityV422/Configuration.h @@ -1671,7 +1671,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1707,7 +1707,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 44, -6, -2.35 } +#define NOZZLE_TO_PROBE_OFFSET { 44, -6, -2.35 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/Creality/Ender-3 Pro/CrealityV427/BLTouch/Configuration.h b/config/examples/Creality/Ender-3 Pro/CrealityV427/BLTouch/Configuration.h index dc0f646bba..c159745269 100644 --- a/config/examples/Creality/Ender-3 Pro/CrealityV427/BLTouch/Configuration.h +++ b/config/examples/Creality/Ender-3 Pro/CrealityV427/BLTouch/Configuration.h @@ -1672,7 +1672,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1708,7 +1708,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { -45, -5, -1.2 } +#define NOZZLE_TO_PROBE_OFFSET { -45, -5, -1.2 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/Creality/Ender-3 Pro/CrealityV427/base/Configuration.h b/config/examples/Creality/Ender-3 Pro/CrealityV427/base/Configuration.h index cd9581ba27..5eec4fcbe9 100644 --- a/config/examples/Creality/Ender-3 Pro/CrealityV427/base/Configuration.h +++ b/config/examples/Creality/Ender-3 Pro/CrealityV427/base/Configuration.h @@ -1672,7 +1672,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1708,7 +1708,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/Creality/Ender-3 S1 Plus/Configuration.h b/config/examples/Creality/Ender-3 S1 Plus/Configuration.h index fa3344b768..a74aecaf5c 100644 --- a/config/examples/Creality/Ender-3 S1 Plus/Configuration.h +++ b/config/examples/Creality/Ender-3 S1 Plus/Configuration.h @@ -1672,7 +1672,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1708,7 +1708,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { -31.8, -40.5, 0 } +#define NOZZLE_TO_PROBE_OFFSET { -31.8, -40.5, 0 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/Creality/Ender-3 S1 Pro/Configuration.h b/config/examples/Creality/Ender-3 S1 Pro/Configuration.h index 96d1c9f12e..74ff7c9c14 100644 --- a/config/examples/Creality/Ender-3 S1 Pro/Configuration.h +++ b/config/examples/Creality/Ender-3 S1 Pro/Configuration.h @@ -1672,7 +1672,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1708,7 +1708,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { -31.8, -40.5, 0 } +#define NOZZLE_TO_PROBE_OFFSET { -31.8, -40.5, 0 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/Creality/Ender-3 S1/STM32F1/Configuration.h b/config/examples/Creality/Ender-3 S1/STM32F1/Configuration.h index fd1a1126bf..65301c9181 100644 --- a/config/examples/Creality/Ender-3 S1/STM32F1/Configuration.h +++ b/config/examples/Creality/Ender-3 S1/STM32F1/Configuration.h @@ -1671,7 +1671,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1707,7 +1707,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { -37, -39, -3.25 } +#define NOZZLE_TO_PROBE_OFFSET { -37, -39, -3.25 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/Creality/Ender-3 S1/STM32F4/Configuration.h b/config/examples/Creality/Ender-3 S1/STM32F4/Configuration.h index d259172513..08b97516dc 100644 --- a/config/examples/Creality/Ender-3 S1/STM32F4/Configuration.h +++ b/config/examples/Creality/Ender-3 S1/STM32F4/Configuration.h @@ -1671,7 +1671,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1707,7 +1707,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { -37, -39, -2.75 } +#define NOZZLE_TO_PROBE_OFFSET { -37, -39, -2.75 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/Creality/Ender-3 V2 Neo/BigTreeTech SKR Mini E3 3.0/Configuration.h b/config/examples/Creality/Ender-3 V2 Neo/BigTreeTech SKR Mini E3 3.0/Configuration.h index faa8ad08cd..60cb2efba7 100644 --- a/config/examples/Creality/Ender-3 V2 Neo/BigTreeTech SKR Mini E3 3.0/Configuration.h +++ b/config/examples/Creality/Ender-3 V2 Neo/BigTreeTech SKR Mini E3 3.0/Configuration.h @@ -1671,7 +1671,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1707,7 +1707,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { -39, -12, 0 } +#define NOZZLE_TO_PROBE_OFFSET { -39, -12, 0 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/Creality/Ender-3 V2 Neo/CrealityV422/Configuration.h b/config/examples/Creality/Ender-3 V2 Neo/CrealityV422/Configuration.h index 90c4731db6..b43f752dec 100644 --- a/config/examples/Creality/Ender-3 V2 Neo/CrealityV422/Configuration.h +++ b/config/examples/Creality/Ender-3 V2 Neo/CrealityV422/Configuration.h @@ -1672,7 +1672,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1708,7 +1708,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { -39, -12, 0 } +#define NOZZLE_TO_PROBE_OFFSET { -39, -12, 0 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/CrealityUI/Configuration.h b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/CrealityUI/Configuration.h index b988aa2efc..d51389a193 100644 --- a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/CrealityUI/Configuration.h +++ b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/CrealityUI/Configuration.h @@ -1671,7 +1671,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1707,7 +1707,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/MarlinUI/Configuration.h b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/MarlinUI/Configuration.h index c6701896fa..f979e03b75 100644 --- a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/MarlinUI/Configuration.h +++ b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/MarlinUI/Configuration.h @@ -1671,7 +1671,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1707,7 +1707,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 2.0/CrealityUI/Configuration.h b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 2.0/CrealityUI/Configuration.h index 11298baffb..21b3bab9bf 100644 --- a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 2.0/CrealityUI/Configuration.h +++ b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 2.0/CrealityUI/Configuration.h @@ -1672,7 +1672,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1708,7 +1708,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 2.0/MarlinUI/Configuration.h b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 2.0/MarlinUI/Configuration.h index a5400d3545..866a2c91d9 100644 --- a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 2.0/MarlinUI/Configuration.h +++ b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 2.0/MarlinUI/Configuration.h @@ -1672,7 +1672,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1708,7 +1708,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 3.0/CrealityUI/Configuration.h b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 3.0/CrealityUI/Configuration.h index 9ef1b6ab96..ad978e2fc7 100644 --- a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 3.0/CrealityUI/Configuration.h +++ b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 3.0/CrealityUI/Configuration.h @@ -1671,7 +1671,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1707,7 +1707,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 3.0/MarlinUI/Configuration.h b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 3.0/MarlinUI/Configuration.h index cd9563ae84..7f06231d08 100644 --- a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 3.0/MarlinUI/Configuration.h +++ b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 3.0/MarlinUI/Configuration.h @@ -1671,7 +1671,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1707,7 +1707,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/Creality/Ender-3 V2/CrealityV422/CrealityUI/Configuration.h b/config/examples/Creality/Ender-3 V2/CrealityV422/CrealityUI/Configuration.h index 367d3ee1a7..9d6ed152da 100644 --- a/config/examples/Creality/Ender-3 V2/CrealityV422/CrealityUI/Configuration.h +++ b/config/examples/Creality/Ender-3 V2/CrealityV422/CrealityUI/Configuration.h @@ -1671,7 +1671,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1707,7 +1707,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/Creality/Ender-3 V2/CrealityV422/MarlinUI/Configuration.h b/config/examples/Creality/Ender-3 V2/CrealityV422/MarlinUI/Configuration.h index c678c61d7f..588216ed36 100644 --- a/config/examples/Creality/Ender-3 V2/CrealityV422/MarlinUI/Configuration.h +++ b/config/examples/Creality/Ender-3 V2/CrealityV422/MarlinUI/Configuration.h @@ -1671,7 +1671,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1707,7 +1707,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/Creality/Ender-3 V2/CrealityV427/CrealityUI/Configuration.h b/config/examples/Creality/Ender-3 V2/CrealityV427/CrealityUI/Configuration.h index 259bdadd47..ea8354ad6d 100644 --- a/config/examples/Creality/Ender-3 V2/CrealityV427/CrealityUI/Configuration.h +++ b/config/examples/Creality/Ender-3 V2/CrealityV427/CrealityUI/Configuration.h @@ -1671,7 +1671,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1707,7 +1707,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/Creality/Ender-3 V2/CrealityV427/MarlinUI/Configuration.h b/config/examples/Creality/Ender-3 V2/CrealityV427/MarlinUI/Configuration.h index 185461fa0a..aef66e5185 100644 --- a/config/examples/Creality/Ender-3 V2/CrealityV427/MarlinUI/Configuration.h +++ b/config/examples/Creality/Ender-3 V2/CrealityV427/MarlinUI/Configuration.h @@ -1671,7 +1671,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1707,7 +1707,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/Creality/Ender-3/BigTreeTech E3 RRF/Configuration.h b/config/examples/Creality/Ender-3/BigTreeTech E3 RRF/Configuration.h index 12f5e04851..b065e6b102 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech E3 RRF/Configuration.h +++ b/config/examples/Creality/Ender-3/BigTreeTech E3 RRF/Configuration.h @@ -1670,7 +1670,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1706,7 +1706,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { -40, -10, -1.85 } +#define NOZZLE_TO_PROBE_OFFSET { -40, -10, -1.85 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/Creality/Ender-3/BigTreeTech Manta E3 EZ/Configuration.h b/config/examples/Creality/Ender-3/BigTreeTech Manta E3 EZ/Configuration.h index 098bf32112..7f596f87f9 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech Manta E3 EZ/Configuration.h +++ b/config/examples/Creality/Ender-3/BigTreeTech Manta E3 EZ/Configuration.h @@ -1668,7 +1668,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1704,7 +1704,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR 1.4/Configuration.h b/config/examples/Creality/Ender-3/BigTreeTech SKR 1.4/Configuration.h index e6b9a713a4..d24764cdb6 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR 1.4/Configuration.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR 1.4/Configuration.h @@ -1672,7 +1672,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1708,7 +1708,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { -42, -5, 0 } +#define NOZZLE_TO_PROBE_OFFSET { -42, -5, 0 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/2-into-1 Hotend/Configuration.h b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/2-into-1 Hotend/Configuration.h index 103706d083..4008d05677 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/2-into-1 Hotend/Configuration.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/2-into-1 Hotend/Configuration.h @@ -1670,7 +1670,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1706,7 +1706,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Dual Z/Configuration.h b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Dual Z/Configuration.h index 776735f16b..143c55d0be 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Dual Z/Configuration.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Dual Z/Configuration.h @@ -1670,7 +1670,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1706,7 +1706,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Single Extruder/Configuration.h b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Single Extruder/Configuration.h index b222492284..28ec133613 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Single Extruder/Configuration.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Single Extruder/Configuration.h @@ -1670,7 +1670,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1706,7 +1706,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR E3-DIP V1.1/Configuration.h b/config/examples/Creality/Ender-3/BigTreeTech SKR E3-DIP V1.1/Configuration.h index cb315a1baa..761b67e593 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR E3-DIP V1.1/Configuration.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR E3-DIP V1.1/Configuration.h @@ -1671,7 +1671,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1707,7 +1707,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.0/Configuration.h b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.0/Configuration.h index cd4a1e2fe0..65628daec9 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.0/Configuration.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.0/Configuration.h @@ -1670,7 +1670,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1706,7 +1706,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.2/Configuration.h b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.2/Configuration.h index 3d8ad44986..fe73404112 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.2/Configuration.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.2/Configuration.h @@ -1670,7 +1670,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1706,7 +1706,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 2.0/Configuration.h b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 2.0/Configuration.h index 386670dab5..cfee913fee 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 2.0/Configuration.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 2.0/Configuration.h @@ -1670,7 +1670,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1706,7 +1706,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 3.0/Configuration.h b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 3.0/Configuration.h index 33db793875..c5a495b8f8 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 3.0/Configuration.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 3.0/Configuration.h @@ -1670,7 +1670,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1706,7 +1706,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/Creality/Ender-3/Creality free-runs/Configuration.h b/config/examples/Creality/Ender-3/Creality free-runs/Configuration.h index bf39a80ae5..d6ebd1719e 100644 --- a/config/examples/Creality/Ender-3/Creality free-runs/Configuration.h +++ b/config/examples/Creality/Ender-3/Creality free-runs/Configuration.h @@ -1672,7 +1672,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1708,7 +1708,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/Creality/Ender-3/CrealityV1/Configuration.h b/config/examples/Creality/Ender-3/CrealityV1/Configuration.h index f1a70df6f7..9be29046fb 100644 --- a/config/examples/Creality/Ender-3/CrealityV1/Configuration.h +++ b/config/examples/Creality/Ender-3/CrealityV1/Configuration.h @@ -1672,7 +1672,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1708,7 +1708,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/Creality/Ender-3/CrealityV422/Configuration.h b/config/examples/Creality/Ender-3/CrealityV422/Configuration.h index ccd102693a..a2da38aaaa 100644 --- a/config/examples/Creality/Ender-3/CrealityV422/Configuration.h +++ b/config/examples/Creality/Ender-3/CrealityV422/Configuration.h @@ -1678,7 +1678,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1714,7 +1714,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/Creality/Ender-3/CrealityV427/Configuration.h b/config/examples/Creality/Ender-3/CrealityV427/Configuration.h index 37e25673c7..de07c7795f 100644 --- a/config/examples/Creality/Ender-3/CrealityV427/Configuration.h +++ b/config/examples/Creality/Ender-3/CrealityV427/Configuration.h @@ -1672,7 +1672,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1708,7 +1708,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/BLTouch/Configuration.h b/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/BLTouch/Configuration.h index f9f184637f..d1eeeb1f4b 100644 --- a/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/BLTouch/Configuration.h +++ b/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/BLTouch/Configuration.h @@ -1672,7 +1672,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1708,7 +1708,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { -44, -6, -3.9 } +#define NOZZLE_TO_PROBE_OFFSET { -44, -6, -3.9 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/base/Configuration.h b/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/base/Configuration.h index 3890b6d7c2..fa81d91bae 100644 --- a/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/base/Configuration.h +++ b/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/base/Configuration.h @@ -1672,7 +1672,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1708,7 +1708,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/Creality/Ender-3/FYSETC Cheetah 2.0/Configuration.h b/config/examples/Creality/Ender-3/FYSETC Cheetah 2.0/Configuration.h index 1cc019d24b..ae8f32f470 100644 --- a/config/examples/Creality/Ender-3/FYSETC Cheetah 2.0/Configuration.h +++ b/config/examples/Creality/Ender-3/FYSETC Cheetah 2.0/Configuration.h @@ -1672,7 +1672,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1708,7 +1708,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/Creality/Ender-3/FYSETC Cheetah/BLTouch/Configuration.h b/config/examples/Creality/Ender-3/FYSETC Cheetah/BLTouch/Configuration.h index 74266b85eb..be5766dad3 100644 --- a/config/examples/Creality/Ender-3/FYSETC Cheetah/BLTouch/Configuration.h +++ b/config/examples/Creality/Ender-3/FYSETC Cheetah/BLTouch/Configuration.h @@ -1672,7 +1672,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1708,7 +1708,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { -44, -6, -3.9 } +#define NOZZLE_TO_PROBE_OFFSET { -44, -6, -3.9 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/Creality/Ender-3/FYSETC Cheetah/base/Configuration.h b/config/examples/Creality/Ender-3/FYSETC Cheetah/base/Configuration.h index a974cfb766..83aae49354 100644 --- a/config/examples/Creality/Ender-3/FYSETC Cheetah/base/Configuration.h +++ b/config/examples/Creality/Ender-3/FYSETC Cheetah/base/Configuration.h @@ -1672,7 +1672,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1708,7 +1708,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/Creality/Ender-3/MEEB-3DP/Configuration.h b/config/examples/Creality/Ender-3/MEEB-3DP/Configuration.h index 372d847121..c4277c4a6b 100644 --- a/config/examples/Creality/Ender-3/MEEB-3DP/Configuration.h +++ b/config/examples/Creality/Ender-3/MEEB-3DP/Configuration.h @@ -1677,7 +1677,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1713,7 +1713,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/Creality/Ender-3/MKS Robin E3/V1.0/Configuration.h b/config/examples/Creality/Ender-3/MKS Robin E3/V1.0/Configuration.h index 687dbb03e1..b58ceb2241 100644 --- a/config/examples/Creality/Ender-3/MKS Robin E3/V1.0/Configuration.h +++ b/config/examples/Creality/Ender-3/MKS Robin E3/V1.0/Configuration.h @@ -1670,7 +1670,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1706,7 +1706,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/Creality/Ender-3/MKS Robin E3/V1.1/Configuration.h b/config/examples/Creality/Ender-3/MKS Robin E3/V1.1/Configuration.h index 6cf650d680..b7027fbe20 100644 --- a/config/examples/Creality/Ender-3/MKS Robin E3/V1.1/Configuration.h +++ b/config/examples/Creality/Ender-3/MKS Robin E3/V1.1/Configuration.h @@ -1670,7 +1670,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1706,7 +1706,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/Creality/Ender-3/MKS Robin E3P/Configuration.h b/config/examples/Creality/Ender-3/MKS Robin E3P/Configuration.h index a6741c04b4..4f556d7e12 100644 --- a/config/examples/Creality/Ender-3/MKS Robin E3P/Configuration.h +++ b/config/examples/Creality/Ender-3/MKS Robin E3P/Configuration.h @@ -1672,7 +1672,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1708,7 +1708,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/Creality/Ender-3/TH3D EZBoard Lite V2/Configuration.h b/config/examples/Creality/Ender-3/TH3D EZBoard Lite V2/Configuration.h index 28b5fbace5..7e801baab1 100644 --- a/config/examples/Creality/Ender-3/TH3D EZBoard Lite V2/Configuration.h +++ b/config/examples/Creality/Ender-3/TH3D EZBoard Lite V2/Configuration.h @@ -1672,7 +1672,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1708,7 +1708,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/Creality/Ender-4/Configuration.h b/config/examples/Creality/Ender-4/Configuration.h index 56d315064e..b3e8b2f783 100644 --- a/config/examples/Creality/Ender-4/Configuration.h +++ b/config/examples/Creality/Ender-4/Configuration.h @@ -1671,7 +1671,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1707,7 +1707,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/Creality/Ender-5 Plus/BigTreeTech SKR 3/Configuration.h b/config/examples/Creality/Ender-5 Plus/BigTreeTech SKR 3/Configuration.h index 5c853e8c1a..aeed99227c 100644 --- a/config/examples/Creality/Ender-5 Plus/BigTreeTech SKR 3/Configuration.h +++ b/config/examples/Creality/Ender-5 Plus/BigTreeTech SKR 3/Configuration.h @@ -1671,7 +1671,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1707,7 +1707,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { -44, -5, -2.8 } +#define NOZZLE_TO_PROBE_OFFSET { -44, -5, -2.8 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/Creality/Ender-5 Plus/Creality 4.2.2 (RELOADED UI)/Configuration.h b/config/examples/Creality/Ender-5 Plus/Creality 4.2.2 (RELOADED UI)/Configuration.h index 29029272f4..4d185533f3 100644 --- a/config/examples/Creality/Ender-5 Plus/Creality 4.2.2 (RELOADED UI)/Configuration.h +++ b/config/examples/Creality/Ender-5 Plus/Creality 4.2.2 (RELOADED UI)/Configuration.h @@ -1677,7 +1677,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1714,7 +1714,7 @@ * O-- FRONT --+ */ // Note on Creality Ender-5 Plus: Z offset must be adjusted (M851) every time once the probe has been loosen/unmounted. -#define NOZZLE_TO_PROBE_OFFSET { -44, -5, -2.8 } +#define NOZZLE_TO_PROBE_OFFSET { -44, -5, -2.8 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/Creality/Ender-5 Plus/CrealityV1 (ORIGIN UI)/Configuration.h b/config/examples/Creality/Ender-5 Plus/CrealityV1 (ORIGIN UI)/Configuration.h index c592a28b9f..953f067d4e 100644 --- a/config/examples/Creality/Ender-5 Plus/CrealityV1 (ORIGIN UI)/Configuration.h +++ b/config/examples/Creality/Ender-5 Plus/CrealityV1 (ORIGIN UI)/Configuration.h @@ -1680,7 +1680,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1717,7 +1717,7 @@ * O-- FRONT --+ */ // Note on Creality Ender-5 Plus: Z offset must be adjusted (M851) every time once the probe has been loosen/unmounted. -#define NOZZLE_TO_PROBE_OFFSET { -44, -5, -2.8 } +#define NOZZLE_TO_PROBE_OFFSET { -44, -5, -2.8 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/Creality/Ender-5 Plus/CrealityV1 (RELOADED UI)/Configuration.h b/config/examples/Creality/Ender-5 Plus/CrealityV1 (RELOADED UI)/Configuration.h index 165203ab9a..16c3117088 100644 --- a/config/examples/Creality/Ender-5 Plus/CrealityV1 (RELOADED UI)/Configuration.h +++ b/config/examples/Creality/Ender-5 Plus/CrealityV1 (RELOADED UI)/Configuration.h @@ -1680,7 +1680,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1717,7 +1717,7 @@ * O-- FRONT --+ */ // Note on Creality Ender-5 Plus: Z offset must be adjusted (M851) every time once the probe has been loosen/unmounted. -#define NOZZLE_TO_PROBE_OFFSET { -44, -5, -2.8 } +#define NOZZLE_TO_PROBE_OFFSET { -44, -5, -2.8 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR E3 Turbo/Configuration.h b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR E3 Turbo/Configuration.h index 6bb0fb0c08..78e4cf77f6 100644 --- a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR E3 Turbo/Configuration.h +++ b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR E3 Turbo/Configuration.h @@ -1679,7 +1679,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1715,7 +1715,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { -40, -10, -1.85 } +#define NOZZLE_TO_PROBE_OFFSET { -40, -10, -1.85 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 1.2/Configuration.h b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 1.2/Configuration.h index fab142828f..811b44f163 100644 --- a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 1.2/Configuration.h +++ b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 1.2/Configuration.h @@ -1670,7 +1670,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1706,7 +1706,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 2.0 with BLTouch/Configuration.h b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 2.0 with BLTouch/Configuration.h index 44bc65efba..d541dc7571 100644 --- a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 2.0 with BLTouch/Configuration.h +++ b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 2.0 with BLTouch/Configuration.h @@ -1672,7 +1672,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1708,7 +1708,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 3.0 with BLTouch-HighTemp/Configuration.h b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 3.0 with BLTouch-HighTemp/Configuration.h index 8b8eb4c615..65fdea6b58 100644 --- a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 3.0 with BLTouch-HighTemp/Configuration.h +++ b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 3.0 with BLTouch-HighTemp/Configuration.h @@ -1671,7 +1671,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1707,7 +1707,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { -44, -7, 0 } +#define NOZZLE_TO_PROBE_OFFSET { -44, -7, 0 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/Creality/Ender-5 Pro/CrealityV1/Configuration.h b/config/examples/Creality/Ender-5 Pro/CrealityV1/Configuration.h index 0b32877cf2..50381940ac 100644 --- a/config/examples/Creality/Ender-5 Pro/CrealityV1/Configuration.h +++ b/config/examples/Creality/Ender-5 Pro/CrealityV1/Configuration.h @@ -1672,7 +1672,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1708,7 +1708,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/Creality/Ender-5 Pro/CrealityV422/Configuration.h b/config/examples/Creality/Ender-5 Pro/CrealityV422/Configuration.h index f1cd95e71a..994634bab9 100644 --- a/config/examples/Creality/Ender-5 Pro/CrealityV422/Configuration.h +++ b/config/examples/Creality/Ender-5 Pro/CrealityV422/Configuration.h @@ -1685,7 +1685,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1721,7 +1721,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { -40, -13, -1.45 } +#define NOZZLE_TO_PROBE_OFFSET { -40, -13, -1.45 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/Creality/Ender-5 Pro/CrealityV427/Configuration.h b/config/examples/Creality/Ender-5 Pro/CrealityV427/Configuration.h index 435259ac06..634a8998f5 100644 --- a/config/examples/Creality/Ender-5 Pro/CrealityV427/Configuration.h +++ b/config/examples/Creality/Ender-5 Pro/CrealityV427/Configuration.h @@ -1672,7 +1672,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1708,7 +1708,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/Creality/Ender-5 S1/Configuration.h b/config/examples/Creality/Ender-5 S1/Configuration.h index 90c05a8408..1343ce7457 100644 --- a/config/examples/Creality/Ender-5 S1/Configuration.h +++ b/config/examples/Creality/Ender-5 S1/Configuration.h @@ -1702,7 +1702,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1742,7 +1742,7 @@ //#define NOZZLE_TO_PROBE_OFFSET { 38, -9, 0 } // Installation on the right //#define NOZZLE_TO_PROBE_OFFSET { 0, -19, 0 } // Install BLTouch in front //#define NOZZLE_TO_PROBE_OFFSET { -29.5, -11.3, 0 } // Installation on the left -#define NOZZLE_TO_PROBE_OFFSET { -12.5, 26.5, 0 } +#define NOZZLE_TO_PROBE_OFFSET { -12.5, 26.5, 0 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo with BLTouch/Configuration.h b/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo with BLTouch/Configuration.h index 4b344bb4e2..6a445424ff 100644 --- a/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo with BLTouch/Configuration.h +++ b/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo with BLTouch/Configuration.h @@ -1672,7 +1672,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1708,7 +1708,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { -40, -10, -1.85 } +#define NOZZLE_TO_PROBE_OFFSET { -40, -10, -1.85 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo/Configuration.h b/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo/Configuration.h index 1ee15cb2be..1da136adaf 100644 --- a/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo/Configuration.h +++ b/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo/Configuration.h @@ -1672,7 +1672,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1708,7 +1708,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { -40, -10, -1.85 } +#define NOZZLE_TO_PROBE_OFFSET { -40, -10, -1.85 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 1.2/Configuration.h b/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 1.2/Configuration.h index 196684e98c..b9564ea837 100644 --- a/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 1.2/Configuration.h +++ b/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 1.2/Configuration.h @@ -1670,7 +1670,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1706,7 +1706,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { -48, -24, 0 } +#define NOZZLE_TO_PROBE_OFFSET { -48, -24, 0 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 2.0/Configuration.h b/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 2.0/Configuration.h index 8c117ac698..0d627021cf 100644 --- a/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 2.0/Configuration.h +++ b/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 2.0/Configuration.h @@ -1670,7 +1670,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1706,7 +1706,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 3.0 with BLTouch/Configuration.h b/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 3.0 with BLTouch/Configuration.h index 160d42ff2a..936a1aca6f 100644 --- a/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 3.0 with BLTouch/Configuration.h +++ b/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 3.0 with BLTouch/Configuration.h @@ -1672,7 +1672,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1708,7 +1708,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { -44, -16, 0 } +#define NOZZLE_TO_PROBE_OFFSET { -44, -16, 0 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/Creality/Ender-5/Creality free-runs/Configuration.h b/config/examples/Creality/Ender-5/Creality free-runs/Configuration.h index 58a0c786dd..40d8f47072 100644 --- a/config/examples/Creality/Ender-5/Creality free-runs/Configuration.h +++ b/config/examples/Creality/Ender-5/Creality free-runs/Configuration.h @@ -1672,7 +1672,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1708,7 +1708,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/Creality/Ender-5/CrealityV1/Configuration.h b/config/examples/Creality/Ender-5/CrealityV1/Configuration.h index 4a9edf1360..7d7e6fe03b 100644 --- a/config/examples/Creality/Ender-5/CrealityV1/Configuration.h +++ b/config/examples/Creality/Ender-5/CrealityV1/Configuration.h @@ -1672,7 +1672,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1708,7 +1708,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/Creality/Ender-5/CrealityV427 with BLTouch/Configuration.h b/config/examples/Creality/Ender-5/CrealityV427 with BLTouch/Configuration.h index 45b5036b35..c4679ab67c 100644 --- a/config/examples/Creality/Ender-5/CrealityV427 with BLTouch/Configuration.h +++ b/config/examples/Creality/Ender-5/CrealityV427 with BLTouch/Configuration.h @@ -1672,7 +1672,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1708,7 +1708,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { -44, -5, 0 } +#define NOZZLE_TO_PROBE_OFFSET { -44, -5, 0 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/Creality/Ender-5/CrealityV427/Configuration.h b/config/examples/Creality/Ender-5/CrealityV427/Configuration.h index dbe97a7fff..194fe0c9fa 100644 --- a/config/examples/Creality/Ender-5/CrealityV427/Configuration.h +++ b/config/examples/Creality/Ender-5/CrealityV427/Configuration.h @@ -1672,7 +1672,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1708,7 +1708,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/Creality/Ender-6/Configuration.h b/config/examples/Creality/Ender-6/Configuration.h index 80981d9215..6b172aba52 100644 --- a/config/examples/Creality/Ender-6/Configuration.h +++ b/config/examples/Creality/Ender-6/Configuration.h @@ -1678,7 +1678,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1714,7 +1714,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { -20.7, -7, -2.5 } +#define NOZZLE_TO_PROBE_OFFSET { -20.7, -7, -2.5 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/Dagoma/Disco Ultimate/Configuration.h b/config/examples/Dagoma/Disco Ultimate/Configuration.h index d07d6d621b..6cce544682 100644 --- a/config/examples/Dagoma/Disco Ultimate/Configuration.h +++ b/config/examples/Dagoma/Disco Ultimate/Configuration.h @@ -1671,7 +1671,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1707,7 +1707,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 0, 21, -1.5 } +#define NOZZLE_TO_PROBE_OFFSET { 0, 21, -1.5 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/Daycom/3DP-100/Configuration.h b/config/examples/Daycom/3DP-100/Configuration.h index b52e18689a..4f03c1c0ab 100644 --- a/config/examples/Daycom/3DP-100/Configuration.h +++ b/config/examples/Daycom/3DP-100/Configuration.h @@ -1675,7 +1675,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1711,7 +1711,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/E3D/BigBox Dual/Configuration.h b/config/examples/E3D/BigBox Dual/Configuration.h index 8cb0b48feb..bb7bb9b63f 100644 --- a/config/examples/E3D/BigBox Dual/Configuration.h +++ b/config/examples/E3D/BigBox Dual/Configuration.h @@ -1671,7 +1671,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1707,7 +1707,8 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 0, 35, 0 } // BigBox IR Probe +// BigBox IR Probe +#define NOZZLE_TO_PROBE_OFFSET { 0, 35, 0 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/EXP3D/Imprimante multifonction/Configuration.h b/config/examples/EXP3D/Imprimante multifonction/Configuration.h index e3f0b05cdc..af7a1fb722 100644 --- a/config/examples/EXP3D/Imprimante multifonction/Configuration.h +++ b/config/examples/EXP3D/Imprimante multifonction/Configuration.h @@ -1671,7 +1671,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1707,7 +1707,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { -25, -29, -12.35 } +#define NOZZLE_TO_PROBE_OFFSET { -25, -29, -12.35 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/EasyThreeD/ET4000PLUS/Configuration.h b/config/examples/EasyThreeD/ET4000PLUS/Configuration.h index 4b3e7c838f..146a871502 100644 --- a/config/examples/EasyThreeD/ET4000PLUS/Configuration.h +++ b/config/examples/EasyThreeD/ET4000PLUS/Configuration.h @@ -1671,7 +1671,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1707,7 +1707,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/Eazao/Zero/Configuration.h b/config/examples/Eazao/Zero/Configuration.h index a72dc9e84b..2a5f7d9d3a 100644 --- a/config/examples/Eazao/Zero/Configuration.h +++ b/config/examples/Eazao/Zero/Configuration.h @@ -1671,7 +1671,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1707,7 +1707,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/Einstart-S/Configuration.h b/config/examples/Einstart-S/Configuration.h index f7c3f9f836..b6b586977a 100644 --- a/config/examples/Einstart-S/Configuration.h +++ b/config/examples/Einstart-S/Configuration.h @@ -1676,7 +1676,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1712,7 +1712,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/Elegoo/Neptune 2/Configuration.h b/config/examples/Elegoo/Neptune 2/Configuration.h index 831ae18ea6..5106bf3b68 100644 --- a/config/examples/Elegoo/Neptune 2/Configuration.h +++ b/config/examples/Elegoo/Neptune 2/Configuration.h @@ -1727,7 +1727,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1763,7 +1763,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 32.55, 3, 0 } +#define NOZZLE_TO_PROBE_OFFSET { 32.55, 3, 0 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/Eryone/Thinker SE/Configuration.h b/config/examples/Eryone/Thinker SE/Configuration.h index 12404b31ac..93906c5bcf 100644 --- a/config/examples/Eryone/Thinker SE/Configuration.h +++ b/config/examples/Eryone/Thinker SE/Configuration.h @@ -1693,7 +1693,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1730,7 +1730,7 @@ * O-- FRONT --+ */ // this is for the BLTouch mount designed by Eryone: https://www.thingiverse.com/thing:4585251 -#define NOZZLE_TO_PROBE_OFFSET { 30, 0, 0 } +#define NOZZLE_TO_PROBE_OFFSET { 30, 0, 0 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/Eryone/Thinker V2/Configuration.h b/config/examples/Eryone/Thinker V2/Configuration.h index 04d11e27eb..13f2c05612 100644 --- a/config/examples/Eryone/Thinker V2/Configuration.h +++ b/config/examples/Eryone/Thinker V2/Configuration.h @@ -1695,7 +1695,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1731,7 +1731,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 40, 10, 0 } +#define NOZZLE_TO_PROBE_OFFSET { 40, 10, 0 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/FYSETC/AIO_II/Configuration.h b/config/examples/FYSETC/AIO_II/Configuration.h index fbb2613b4e..08c4eaeaf0 100644 --- a/config/examples/FYSETC/AIO_II/Configuration.h +++ b/config/examples/FYSETC/AIO_II/Configuration.h @@ -1672,7 +1672,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1708,7 +1708,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/FYSETC/F6_13/Configuration.h b/config/examples/FYSETC/F6_13/Configuration.h index a9dd440f22..ef183331f0 100644 --- a/config/examples/FYSETC/F6_13/Configuration.h +++ b/config/examples/FYSETC/F6_13/Configuration.h @@ -1673,7 +1673,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1709,7 +1709,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/FYSETC/S6/Configuration.h b/config/examples/FYSETC/S6/Configuration.h index 07994cf39f..7f06f5dd0d 100644 --- a/config/examples/FYSETC/S6/Configuration.h +++ b/config/examples/FYSETC/S6/Configuration.h @@ -1671,7 +1671,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1707,7 +1707,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/Felix/DUAL/Configuration.h b/config/examples/Felix/DUAL/Configuration.h index 04e20a17c0..749858aceb 100644 --- a/config/examples/Felix/DUAL/Configuration.h +++ b/config/examples/Felix/DUAL/Configuration.h @@ -1672,7 +1672,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1708,7 +1708,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { -25, -29, -12.35 } +#define NOZZLE_TO_PROBE_OFFSET { -25, -29, -12.35 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/Felix/Single/Configuration.h b/config/examples/Felix/Single/Configuration.h index cff46c2057..68697f9db0 100644 --- a/config/examples/Felix/Single/Configuration.h +++ b/config/examples/Felix/Single/Configuration.h @@ -1672,7 +1672,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1708,7 +1708,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { -25, -29, -12.35 } +#define NOZZLE_TO_PROBE_OFFSET { -25, -29, -12.35 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/FlashForge/Creator 2X/Configuration.h b/config/examples/FlashForge/Creator 2X/Configuration.h index dd29a539a7..1029cfe3c8 100644 --- a/config/examples/FlashForge/Creator 2X/Configuration.h +++ b/config/examples/FlashForge/Creator 2X/Configuration.h @@ -1671,7 +1671,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1707,7 +1707,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/FlashForge/CreatorPro/Configuration.h b/config/examples/FlashForge/CreatorPro/Configuration.h index c4ee5f0495..4b3e660cdf 100644 --- a/config/examples/FlashForge/CreatorPro/Configuration.h +++ b/config/examples/FlashForge/CreatorPro/Configuration.h @@ -1671,7 +1671,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1707,7 +1707,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/FlyingBear/FlyingBearGhost_v3/Configuration.h b/config/examples/FlyingBear/FlyingBearGhost_v3/Configuration.h index e9d914575c..864b7c4c9a 100644 --- a/config/examples/FlyingBear/FlyingBearGhost_v3/Configuration.h +++ b/config/examples/FlyingBear/FlyingBearGhost_v3/Configuration.h @@ -1671,7 +1671,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1707,7 +1707,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { -46, -11, 0 } +#define NOZZLE_TO_PROBE_OFFSET { -46, -11, 0 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/FlyingBear/P902/Configuration.h b/config/examples/FlyingBear/P902/Configuration.h index bedfa80963..5903620237 100644 --- a/config/examples/FlyingBear/P902/Configuration.h +++ b/config/examples/FlyingBear/P902/Configuration.h @@ -1671,7 +1671,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1707,7 +1707,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 0, 55, -2 } +#define NOZZLE_TO_PROBE_OFFSET { 0, 55, -2 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/FlyingBear/P905H/Configuration.h b/config/examples/FlyingBear/P905H/Configuration.h index 1356c92211..b2e51b34cc 100644 --- a/config/examples/FlyingBear/P905H/Configuration.h +++ b/config/examples/FlyingBear/P905H/Configuration.h @@ -1675,7 +1675,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1711,7 +1711,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, -33, 0 } +#define NOZZLE_TO_PROBE_OFFSET { 10, -33, 0 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/FoamCutter/generic/Configuration.h b/config/examples/FoamCutter/generic/Configuration.h index 29383f2a7d..b327aae1c2 100644 --- a/config/examples/FoamCutter/generic/Configuration.h +++ b/config/examples/FoamCutter/generic/Configuration.h @@ -1671,7 +1671,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1707,7 +1707,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/FoamCutter/rcKeith/Configuration.h b/config/examples/FoamCutter/rcKeith/Configuration.h index aca74925de..59d2866b5a 100644 --- a/config/examples/FoamCutter/rcKeith/Configuration.h +++ b/config/examples/FoamCutter/rcKeith/Configuration.h @@ -1671,7 +1671,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1707,7 +1707,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/FolgerTech/FT-5 R2/Configuration.h b/config/examples/FolgerTech/FT-5 R2/Configuration.h index 003dd4e3ee..fa59a8cf1f 100644 --- a/config/examples/FolgerTech/FT-5 R2/Configuration.h +++ b/config/examples/FolgerTech/FT-5 R2/Configuration.h @@ -1668,7 +1668,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1704,7 +1704,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/FolgerTech/i3-2020/Configuration.h b/config/examples/FolgerTech/i3-2020/Configuration.h index 987c8124cf..7e2163632d 100644 --- a/config/examples/FolgerTech/i3-2020/Configuration.h +++ b/config/examples/FolgerTech/i3-2020/Configuration.h @@ -1673,7 +1673,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1709,7 +1709,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 38, -7, -10.75 } +#define NOZZLE_TO_PROBE_OFFSET { 38, -7, -10.75 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/Formbot/Raptor/Configuration.h b/config/examples/Formbot/Raptor/Configuration.h index 39bfe0ca08..2d2addf8d3 100644 --- a/config/examples/Formbot/Raptor/Configuration.h +++ b/config/examples/Formbot/Raptor/Configuration.h @@ -1762,7 +1762,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1798,7 +1798,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { -22, 0, -1.5 } +#define NOZZLE_TO_PROBE_OFFSET { -22, 0, -1.5 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/Geeetech/A10/Configuration.h b/config/examples/Geeetech/A10/Configuration.h index cce307baf1..420aa8450f 100644 --- a/config/examples/Geeetech/A10/Configuration.h +++ b/config/examples/Geeetech/A10/Configuration.h @@ -1671,7 +1671,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1707,7 +1707,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { -37, 0, -3.6 } +#define NOZZLE_TO_PROBE_OFFSET { -37, 0, -3.6 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/Geeetech/A10D/Configuration.h b/config/examples/Geeetech/A10D/Configuration.h index db6452d94c..37ba792c86 100644 --- a/config/examples/Geeetech/A10D/Configuration.h +++ b/config/examples/Geeetech/A10D/Configuration.h @@ -1670,7 +1670,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1706,7 +1706,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { -37, 0, 0 } +#define NOZZLE_TO_PROBE_OFFSET { -37, 0, 0 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/Geeetech/A10M/Stock LCD/Configuration.h b/config/examples/Geeetech/A10M/Stock LCD/Configuration.h index 3d62c349c0..9722a5a880 100644 --- a/config/examples/Geeetech/A10M/Stock LCD/Configuration.h +++ b/config/examples/Geeetech/A10M/Stock LCD/Configuration.h @@ -1671,7 +1671,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1707,7 +1707,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { -37, 0, -3.6 } +#define NOZZLE_TO_PROBE_OFFSET { -37, 0, -3.6 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/Geeetech/A10M/YHCB2004_V4.1/Configuration.h b/config/examples/Geeetech/A10M/YHCB2004_V4.1/Configuration.h index 70f12d7092..7f5c2a6ef6 100644 --- a/config/examples/Geeetech/A10M/YHCB2004_V4.1/Configuration.h +++ b/config/examples/Geeetech/A10M/YHCB2004_V4.1/Configuration.h @@ -1671,7 +1671,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1707,7 +1707,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { -37, 0, -3.6 } +#define NOZZLE_TO_PROBE_OFFSET { -37, 0, -3.6 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/Geeetech/A10PRO/Configuration.h b/config/examples/Geeetech/A10PRO/Configuration.h index f869714f66..e272a04446 100644 --- a/config/examples/Geeetech/A10PRO/Configuration.h +++ b/config/examples/Geeetech/A10PRO/Configuration.h @@ -1671,7 +1671,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1707,7 +1707,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { -37, 0, -3.6 } +#define NOZZLE_TO_PROBE_OFFSET { -37, 0, -3.6 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/Geeetech/A10T/Stock LCD/Configuration.h b/config/examples/Geeetech/A10T/Stock LCD/Configuration.h index 3519c3874b..c59e786760 100644 --- a/config/examples/Geeetech/A10T/Stock LCD/Configuration.h +++ b/config/examples/Geeetech/A10T/Stock LCD/Configuration.h @@ -1671,7 +1671,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1707,7 +1707,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { -40, 0, 0 } +#define NOZZLE_TO_PROBE_OFFSET { -40, 0, 0 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/Geeetech/A10T/YHCB2004_V4.1/Configuration.h b/config/examples/Geeetech/A10T/YHCB2004_V4.1/Configuration.h index aa2da81698..75d8be79af 100644 --- a/config/examples/Geeetech/A10T/YHCB2004_V4.1/Configuration.h +++ b/config/examples/Geeetech/A10T/YHCB2004_V4.1/Configuration.h @@ -1671,7 +1671,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1707,7 +1707,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { -40, 0, 0 } +#define NOZZLE_TO_PROBE_OFFSET { -40, 0, 0 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/Geeetech/A20/Configuration.h b/config/examples/Geeetech/A20/Configuration.h index d9eaba0ca9..f914b53815 100644 --- a/config/examples/Geeetech/A20/Configuration.h +++ b/config/examples/Geeetech/A20/Configuration.h @@ -1671,7 +1671,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1707,7 +1707,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { -37, 0, -3.6 } +#define NOZZLE_TO_PROBE_OFFSET { -37, 0, -3.6 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/Geeetech/A20M/Configuration.h b/config/examples/Geeetech/A20M/Configuration.h index 011fa06a9d..2405ceffce 100644 --- a/config/examples/Geeetech/A20M/Configuration.h +++ b/config/examples/Geeetech/A20M/Configuration.h @@ -1671,7 +1671,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1707,7 +1707,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { -37, 0, -3.6 } +#define NOZZLE_TO_PROBE_OFFSET { -37, 0, -3.6 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/Geeetech/A20T/Configuration.h b/config/examples/Geeetech/A20T/Configuration.h index 9ce06928c2..5bedc3e04e 100644 --- a/config/examples/Geeetech/A20T/Configuration.h +++ b/config/examples/Geeetech/A20T/Configuration.h @@ -1671,7 +1671,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1707,7 +1707,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { -40, 0, 0 } +#define NOZZLE_TO_PROBE_OFFSET { -40, 0, 0 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/Geeetech/A30/Configuration.h b/config/examples/Geeetech/A30/Configuration.h index 11674fca03..42c94bedca 100644 --- a/config/examples/Geeetech/A30/Configuration.h +++ b/config/examples/Geeetech/A30/Configuration.h @@ -1669,7 +1669,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1705,7 +1705,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/Geeetech/A30M/Configuration.h b/config/examples/Geeetech/A30M/Configuration.h index 87cedb3105..670b6e1fe0 100644 --- a/config/examples/Geeetech/A30M/Configuration.h +++ b/config/examples/Geeetech/A30M/Configuration.h @@ -1669,7 +1669,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1705,7 +1705,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/Geeetech/A30T/Configuration.h b/config/examples/Geeetech/A30T/Configuration.h index fd553befbc..ee4f1728f9 100644 --- a/config/examples/Geeetech/A30T/Configuration.h +++ b/config/examples/Geeetech/A30T/Configuration.h @@ -1669,7 +1669,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1705,7 +1705,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/Geeetech/D200/Configuration.h b/config/examples/Geeetech/D200/Configuration.h index d66a2f873d..6fea05cede 100644 --- a/config/examples/Geeetech/D200/Configuration.h +++ b/config/examples/Geeetech/D200/Configuration.h @@ -1669,7 +1669,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1705,7 +1705,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/Geeetech/Duplicator5/Configuration.h b/config/examples/Geeetech/Duplicator5/Configuration.h index d8e12ee245..7d1e3372d9 100644 --- a/config/examples/Geeetech/Duplicator5/Configuration.h +++ b/config/examples/Geeetech/Duplicator5/Configuration.h @@ -1671,7 +1671,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1707,7 +1707,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { -25, -29, 0 } +#define NOZZLE_TO_PROBE_OFFSET { -25, -29, 0 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/Geeetech/E180/Configuration.h b/config/examples/Geeetech/E180/Configuration.h index c29e7633bc..523c50ce23 100644 --- a/config/examples/Geeetech/E180/Configuration.h +++ b/config/examples/Geeetech/E180/Configuration.h @@ -1670,7 +1670,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1706,7 +1706,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/Geeetech/GT2560/Configuration.h b/config/examples/Geeetech/GT2560/Configuration.h index 2de67159d1..2a384676e6 100644 --- a/config/examples/Geeetech/GT2560/Configuration.h +++ b/config/examples/Geeetech/GT2560/Configuration.h @@ -1676,7 +1676,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1712,7 +1712,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h b/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h index c38a1a14e3..9b8c8286a7 100644 --- a/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h +++ b/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h @@ -1671,7 +1671,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1707,7 +1707,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/Geeetech/M201/Configuration.h b/config/examples/Geeetech/M201/Configuration.h index a41866c8f9..303c862bcb 100644 --- a/config/examples/Geeetech/M201/Configuration.h +++ b/config/examples/Geeetech/M201/Configuration.h @@ -1669,7 +1669,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1705,7 +1705,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/Geeetech/MeCreator2/Configuration.h b/config/examples/Geeetech/MeCreator2/Configuration.h index d60e362e99..8a923113fe 100644 --- a/config/examples/Geeetech/MeCreator2/Configuration.h +++ b/config/examples/Geeetech/MeCreator2/Configuration.h @@ -1670,7 +1670,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1706,7 +1706,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/Geeetech/Me_creator/Configuration.h b/config/examples/Geeetech/Me_creator/Configuration.h index 00d16b0dd0..f3657f1df9 100644 --- a/config/examples/Geeetech/Me_creator/Configuration.h +++ b/config/examples/Geeetech/Me_creator/Configuration.h @@ -1671,7 +1671,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1707,7 +1707,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { -25, -29, 0 } +#define NOZZLE_TO_PROBE_OFFSET { -25, -29, 0 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/Geeetech/Me_ducer/Configuration.h b/config/examples/Geeetech/Me_ducer/Configuration.h index 928c7c56e7..3e82cf22e5 100644 --- a/config/examples/Geeetech/Me_ducer/Configuration.h +++ b/config/examples/Geeetech/Me_ducer/Configuration.h @@ -1671,7 +1671,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1707,7 +1707,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { -15, -5, 0 } +#define NOZZLE_TO_PROBE_OFFSET { -15, -5, 0 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/Geeetech/PI3A PRO/Configuration.h b/config/examples/Geeetech/PI3A PRO/Configuration.h index 8e5b3e9a3d..151da61cef 100644 --- a/config/examples/Geeetech/PI3A PRO/Configuration.h +++ b/config/examples/Geeetech/PI3A PRO/Configuration.h @@ -1681,7 +1681,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1717,7 +1717,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h b/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h index 7478047622..7c6e55bf2d 100644 --- a/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h +++ b/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h @@ -1681,7 +1681,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1717,7 +1717,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 4, -44, -1.4 } +#define NOZZLE_TO_PROBE_OFFSET { 4, -44, -1.4 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h b/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h index 54135e8f3d..d286b1ca1a 100644 --- a/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h +++ b/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h @@ -1681,7 +1681,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1717,7 +1717,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/Geeetech/Prusa i3 Pro C/Configuration.h b/config/examples/Geeetech/Prusa i3 Pro C/Configuration.h index cf0826c24b..3be694e219 100644 --- a/config/examples/Geeetech/Prusa i3 Pro C/Configuration.h +++ b/config/examples/Geeetech/Prusa i3 Pro C/Configuration.h @@ -1671,7 +1671,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1707,7 +1707,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/Geeetech/Prusa i3 Pro W/Configuration.h b/config/examples/Geeetech/Prusa i3 Pro W/Configuration.h index 341a9e41af..8bcd916194 100644 --- a/config/examples/Geeetech/Prusa i3 Pro W/Configuration.h +++ b/config/examples/Geeetech/Prusa i3 Pro W/Configuration.h @@ -1671,7 +1671,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1707,7 +1707,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/HMS434/Configuration.h b/config/examples/HMS434/Configuration.h index a38ee6227f..f0f22ca69c 100644 --- a/config/examples/HMS434/Configuration.h +++ b/config/examples/HMS434/Configuration.h @@ -1669,7 +1669,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1705,7 +1705,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { -21, 22, -1.54 } +#define NOZZLE_TO_PROBE_OFFSET { -21, 22, -1.54 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/Hictop/3DP-17/Configuration.h b/config/examples/Hictop/3DP-17/Configuration.h index 98789c491c..c7b20a66d0 100644 --- a/config/examples/Hictop/3DP-17/Configuration.h +++ b/config/examples/Hictop/3DP-17/Configuration.h @@ -1671,7 +1671,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1707,7 +1707,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, -1 } +#define NOZZLE_TO_PROBE_OFFSET { 10, 10, -1 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/Infitary/i3-M508/Configuration.h b/config/examples/Infitary/i3-M508/Configuration.h index c1b388c21c..cb137f339f 100644 --- a/config/examples/Infitary/i3-M508/Configuration.h +++ b/config/examples/Infitary/i3-M508/Configuration.h @@ -1671,7 +1671,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1707,7 +1707,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/Intamsys/FunmatHT 4988/Configuration.h b/config/examples/Intamsys/FunmatHT 4988/Configuration.h index dcef062a83..eaa1118695 100644 --- a/config/examples/Intamsys/FunmatHT 4988/Configuration.h +++ b/config/examples/Intamsys/FunmatHT 4988/Configuration.h @@ -1671,7 +1671,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1707,7 +1707,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/JGAurora/A1/Configuration.h b/config/examples/JGAurora/A1/Configuration.h index 3cfe051524..2a09293515 100644 --- a/config/examples/JGAurora/A1/Configuration.h +++ b/config/examples/JGAurora/A1/Configuration.h @@ -1675,7 +1675,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1711,7 +1711,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/JGAurora/A3/Configuration.h b/config/examples/JGAurora/A3/Configuration.h index 4681a6df4d..6e81578b07 100644 --- a/config/examples/JGAurora/A3/Configuration.h +++ b/config/examples/JGAurora/A3/Configuration.h @@ -1671,7 +1671,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1707,7 +1707,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/JGAurora/A5/Configuration.h b/config/examples/JGAurora/A5/Configuration.h index 5ad42b90d2..9160084777 100644 --- a/config/examples/JGAurora/A5/Configuration.h +++ b/config/examples/JGAurora/A5/Configuration.h @@ -1679,7 +1679,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1715,7 +1715,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/JGAurora/A5S/Configuration.h b/config/examples/JGAurora/A5S/Configuration.h index 868b5ac156..0f084fb912 100644 --- a/config/examples/JGAurora/A5S/Configuration.h +++ b/config/examples/JGAurora/A5S/Configuration.h @@ -1675,7 +1675,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1711,7 +1711,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/JGAurora/Magic/Configuration.h b/config/examples/JGAurora/Magic/Configuration.h index cf35e256e5..e88016db19 100644 --- a/config/examples/JGAurora/Magic/Configuration.h +++ b/config/examples/JGAurora/Magic/Configuration.h @@ -1671,7 +1671,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1707,7 +1707,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { -25, 1, 0 } +#define NOZZLE_TO_PROBE_OFFSET { -25, 1, 0 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/Kingroon/KP3/Configuration.h b/config/examples/Kingroon/KP3/Configuration.h index 33b0eafc77..22e4ac0813 100644 --- a/config/examples/Kingroon/KP3/Configuration.h +++ b/config/examples/Kingroon/KP3/Configuration.h @@ -1670,7 +1670,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1706,7 +1706,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/Kingroon/KP3S/Configuration.h b/config/examples/Kingroon/KP3S/Configuration.h index 3a3a335b1b..be6e10d767 100644 --- a/config/examples/Kingroon/KP3S/Configuration.h +++ b/config/examples/Kingroon/KP3S/Configuration.h @@ -1671,7 +1671,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1707,7 +1707,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 30.0, -1.0, -2.605 } +#define NOZZLE_TO_PROBE_OFFSET { 30.0, -1.0, -2.605 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/Kingroon/KP3S_Pro/Configuration.h b/config/examples/Kingroon/KP3S_Pro/Configuration.h index 73218dd3a0..61977ea758 100644 --- a/config/examples/Kingroon/KP3S_Pro/Configuration.h +++ b/config/examples/Kingroon/KP3S_Pro/Configuration.h @@ -1702,7 +1702,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1738,7 +1738,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { X_PROBE_OFFSET, Y_PROBE_OFFSET, Z_PROBE_OFFSET } +#define NOZZLE_TO_PROBE_OFFSET { X_PROBE_OFFSET, Y_PROBE_OFFSET, Z_PROBE_OFFSET } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/Kingroon/KP5L-DIY/Configuration.h b/config/examples/Kingroon/KP5L-DIY/Configuration.h index be51ae7cf2..5f98bd384c 100644 --- a/config/examples/Kingroon/KP5L-DIY/Configuration.h +++ b/config/examples/Kingroon/KP5L-DIY/Configuration.h @@ -1671,7 +1671,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1707,7 +1707,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 26.5, -8, -0.76 } +#define NOZZLE_TO_PROBE_OFFSET { 26.5, -8, -0.76 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/Labists/ET4/Configuration.h b/config/examples/Labists/ET4/Configuration.h index cd8531dec3..f1ee9fd151 100644 --- a/config/examples/Labists/ET4/Configuration.h +++ b/config/examples/Labists/ET4/Configuration.h @@ -1677,7 +1677,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1713,7 +1713,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { -25, -8.5, 0 } +#define NOZZLE_TO_PROBE_OFFSET { -25, -8.5, 0 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/Longer/LK5/Configuration.h b/config/examples/Longer/LK5/Configuration.h index 3463f175aa..0285b18d21 100644 --- a/config/examples/Longer/LK5/Configuration.h +++ b/config/examples/Longer/LK5/Configuration.h @@ -1672,7 +1672,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1708,7 +1708,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { -35, -6, -0.5 } +#define NOZZLE_TO_PROBE_OFFSET { -35, -6, -0.5 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/LulzBot/TAZ4/Configuration.h b/config/examples/LulzBot/TAZ4/Configuration.h index 80f57d8b56..5ca106a711 100644 --- a/config/examples/LulzBot/TAZ4/Configuration.h +++ b/config/examples/LulzBot/TAZ4/Configuration.h @@ -1682,7 +1682,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1718,7 +1718,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { -25, -29, -12.35 } +#define NOZZLE_TO_PROBE_OFFSET { -25, -29, -12.35 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/MBot/Cube/Configuration.h b/config/examples/MBot/Cube/Configuration.h index fe12a89c26..741d21c7f2 100644 --- a/config/examples/MBot/Cube/Configuration.h +++ b/config/examples/MBot/Cube/Configuration.h @@ -1671,7 +1671,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1707,7 +1707,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/MZ3D/360/Configuration.h b/config/examples/MZ3D/360/Configuration.h index c681770b68..f52edd5068 100644 --- a/config/examples/MZ3D/360/Configuration.h +++ b/config/examples/MZ3D/360/Configuration.h @@ -1662,7 +1662,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1698,7 +1698,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/MakerBot/Replicator Dual/Configuration.h b/config/examples/MakerBot/Replicator Dual/Configuration.h index eb0f74fab5..b42893b39a 100644 --- a/config/examples/MakerBot/Replicator Dual/Configuration.h +++ b/config/examples/MakerBot/Replicator Dual/Configuration.h @@ -1671,7 +1671,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1707,7 +1707,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/MakerBot/Replicator Single/Configuration.h b/config/examples/MakerBot/Replicator Single/Configuration.h index bf309fd9e7..0f995106a5 100644 --- a/config/examples/MakerBot/Replicator Single/Configuration.h +++ b/config/examples/MakerBot/Replicator Single/Configuration.h @@ -1671,7 +1671,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1707,7 +1707,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/MakerFarm/Pegasus 12/Configuration.h b/config/examples/MakerFarm/Pegasus 12/Configuration.h index 3f65a9e6c3..7b4aec5f46 100644 --- a/config/examples/MakerFarm/Pegasus 12/Configuration.h +++ b/config/examples/MakerFarm/Pegasus 12/Configuration.h @@ -1677,7 +1677,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1713,7 +1713,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { -5, -1, 0 } +#define NOZZLE_TO_PROBE_OFFSET { -5, -1, 0 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/MakerGear/M2 Rev H/Configuration.h b/config/examples/MakerGear/M2 Rev H/Configuration.h index e336b254e7..7da2111bab 100644 --- a/config/examples/MakerGear/M2 Rev H/Configuration.h +++ b/config/examples/MakerGear/M2 Rev H/Configuration.h @@ -1674,7 +1674,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1710,7 +1710,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/MakerParts/Configuration.h b/config/examples/MakerParts/Configuration.h index b23f500689..03c215f835 100644 --- a/config/examples/MakerParts/Configuration.h +++ b/config/examples/MakerParts/Configuration.h @@ -1671,7 +1671,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1707,7 +1707,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/MakerTech3D/Proforge2sDual/Configuration.h b/config/examples/MakerTech3D/Proforge2sDual/Configuration.h index 08b249de14..6d57d029b9 100644 --- a/config/examples/MakerTech3D/Proforge2sDual/Configuration.h +++ b/config/examples/MakerTech3D/Proforge2sDual/Configuration.h @@ -1674,7 +1674,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1710,7 +1710,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 45, 19, -3 } +#define NOZZLE_TO_PROBE_OFFSET { 45, 19, -3 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/Malyan/M150/Configuration.h b/config/examples/Malyan/M150/Configuration.h index 793f2c2dfe..1931da809d 100644 --- a/config/examples/Malyan/M150/Configuration.h +++ b/config/examples/Malyan/M150/Configuration.h @@ -1691,7 +1691,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset diff --git a/config/examples/Malyan/M180/Configuration.h b/config/examples/Malyan/M180/Configuration.h index 66cec047c0..271495e6cb 100644 --- a/config/examples/Malyan/M180/Configuration.h +++ b/config/examples/Malyan/M180/Configuration.h @@ -1672,7 +1672,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1708,7 +1708,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/Malyan/M200/Configuration.h b/config/examples/Malyan/M200/Configuration.h index b1b438c9d4..38db774063 100644 --- a/config/examples/Malyan/M200/Configuration.h +++ b/config/examples/Malyan/M200/Configuration.h @@ -1677,7 +1677,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1713,7 +1713,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/Materia101/Configuration.h b/config/examples/Materia101/Configuration.h index 3a6cc0ecc0..74ba4cd43c 100644 --- a/config/examples/Materia101/Configuration.h +++ b/config/examples/Materia101/Configuration.h @@ -1671,7 +1671,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1707,7 +1707,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/Micromake/C1/basic/Configuration.h b/config/examples/Micromake/C1/basic/Configuration.h index 8e09e36047..648386f894 100644 --- a/config/examples/Micromake/C1/basic/Configuration.h +++ b/config/examples/Micromake/C1/basic/Configuration.h @@ -1675,7 +1675,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1711,7 +1711,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 0, 0, 0 } +#define NOZZLE_TO_PROBE_OFFSET { 0, 0, 0 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/Micromake/C1/enhanced/Configuration.h b/config/examples/Micromake/C1/enhanced/Configuration.h index 83817f1255..182929c94c 100644 --- a/config/examples/Micromake/C1/enhanced/Configuration.h +++ b/config/examples/Micromake/C1/enhanced/Configuration.h @@ -1675,7 +1675,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1711,7 +1711,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 0, 0, 0 } +#define NOZZLE_TO_PROBE_OFFSET { 0, 0, 0 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/Mks/Robin/Configuration.h b/config/examples/Mks/Robin/Configuration.h index cc36cd73cc..ef21ff2429 100644 --- a/config/examples/Mks/Robin/Configuration.h +++ b/config/examples/Mks/Robin/Configuration.h @@ -1671,7 +1671,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1707,7 +1707,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/Mks/Robin_Lite3/Configuration.h b/config/examples/Mks/Robin_Lite3/Configuration.h index 69c9bfc866..c964e9cf4b 100644 --- a/config/examples/Mks/Robin_Lite3/Configuration.h +++ b/config/examples/Mks/Robin_Lite3/Configuration.h @@ -1679,7 +1679,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1715,7 +1715,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/Mks/Robin_Pro/Configuration.h b/config/examples/Mks/Robin_Pro/Configuration.h index 01493202d0..be1bc5bbd7 100644 --- a/config/examples/Mks/Robin_Pro/Configuration.h +++ b/config/examples/Mks/Robin_Pro/Configuration.h @@ -1673,7 +1673,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1709,7 +1709,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/Mks/Sbase/Configuration.h b/config/examples/Mks/Sbase/Configuration.h index 827312ff2f..1f8591771a 100644 --- a/config/examples/Mks/Sbase/Configuration.h +++ b/config/examples/Mks/Sbase/Configuration.h @@ -1671,7 +1671,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1707,7 +1707,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 32, 5, 0 } +#define NOZZLE_TO_PROBE_OFFSET { 32, 5, 0 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/Modix/Big60/Configuration.h b/config/examples/Modix/Big60/Configuration.h index 90ea85abf2..00f0d926f5 100644 --- a/config/examples/Modix/Big60/Configuration.h +++ b/config/examples/Modix/Big60/Configuration.h @@ -1671,7 +1671,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1707,7 +1707,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { -34, 26, 0 } +#define NOZZLE_TO_PROBE_OFFSET { -34, 26, 0 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/Nextion/Configuration.h b/config/examples/Nextion/Configuration.h index dd70af22cb..84ea28aa0a 100644 --- a/config/examples/Nextion/Configuration.h +++ b/config/examples/Nextion/Configuration.h @@ -1671,7 +1671,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1707,7 +1707,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/ORD Bot/Hadron/Sanguinololu/Configuration.h b/config/examples/ORD Bot/Hadron/Sanguinololu/Configuration.h index 107195bc54..3ba9ecc117 100644 --- a/config/examples/ORD Bot/Hadron/Sanguinololu/Configuration.h +++ b/config/examples/ORD Bot/Hadron/Sanguinololu/Configuration.h @@ -1702,7 +1702,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1738,7 +1738,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/Opulo/Lumen_REV3/Configuration.h b/config/examples/Opulo/Lumen_REV3/Configuration.h index cfe80ca2a9..764fee423e 100644 --- a/config/examples/Opulo/Lumen_REV3/Configuration.h +++ b/config/examples/Opulo/Lumen_REV3/Configuration.h @@ -1671,7 +1671,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1707,7 +1707,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/Opulo/Lumen_REV4/Configuration.h b/config/examples/Opulo/Lumen_REV4/Configuration.h index e7c59e2c8a..c17819c815 100644 --- a/config/examples/Opulo/Lumen_REV4/Configuration.h +++ b/config/examples/Opulo/Lumen_REV4/Configuration.h @@ -1671,7 +1671,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1707,7 +1707,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/Opulo/Lumen_REV5/Configuration.h b/config/examples/Opulo/Lumen_REV5/Configuration.h index a81bd58219..d3008c5251 100644 --- a/config/examples/Opulo/Lumen_REV5/Configuration.h +++ b/config/examples/Opulo/Lumen_REV5/Configuration.h @@ -1671,7 +1671,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1707,7 +1707,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/Ortur 4/Configuration.h b/config/examples/Ortur 4/Configuration.h index d0bbd85258..845d9cad96 100644 --- a/config/examples/Ortur 4/Configuration.h +++ b/config/examples/Ortur 4/Configuration.h @@ -1671,7 +1671,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1707,7 +1707,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 0, 14, -0.65 } +#define NOZZLE_TO_PROBE_OFFSET { 0, 14, -0.65 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/Polargraph/Configuration.h b/config/examples/Polargraph/Configuration.h index a67f87756e..9b22c2cd6e 100644 --- a/config/examples/Polargraph/Configuration.h +++ b/config/examples/Polargraph/Configuration.h @@ -1675,7 +1675,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1711,7 +1711,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/Printrbot/PrintrboardG2/Configuration.h b/config/examples/Printrbot/PrintrboardG2/Configuration.h index 5a894c94b4..db5d9dbcbe 100644 --- a/config/examples/Printrbot/PrintrboardG2/Configuration.h +++ b/config/examples/Printrbot/PrintrboardG2/Configuration.h @@ -1673,7 +1673,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1709,7 +1709,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/Printrbot/Simple Metal RevD/Configuration.h b/config/examples/Printrbot/Simple Metal RevD/Configuration.h index 7523211439..6101495858 100644 --- a/config/examples/Printrbot/Simple Metal RevD/Configuration.h +++ b/config/examples/Printrbot/Simple Metal RevD/Configuration.h @@ -1671,7 +1671,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1707,7 +1707,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 20, 0, 0 } +#define NOZZLE_TO_PROBE_OFFSET { 20, 0, 0 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/Printrbot/Simple_Metal_RevF6/Configuration.h b/config/examples/Printrbot/Simple_Metal_RevF6/Configuration.h index 6d7cf246c7..ab556c7b58 100644 --- a/config/examples/Printrbot/Simple_Metal_RevF6/Configuration.h +++ b/config/examples/Printrbot/Simple_Metal_RevF6/Configuration.h @@ -1671,7 +1671,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1707,7 +1707,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 20, 0, 0 } +#define NOZZLE_TO_PROBE_OFFSET { 20, 0, 0 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/Prusa/MK3/Configuration.h b/config/examples/Prusa/MK3/Configuration.h index 2909a6af69..7a2c65c4bc 100644 --- a/config/examples/Prusa/MK3/Configuration.h +++ b/config/examples/Prusa/MK3/Configuration.h @@ -1701,7 +1701,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1737,7 +1737,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 23, 5, -0.5 } +#define NOZZLE_TO_PROBE_OFFSET { 23, 5, -0.5 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/Prusa/MK3S-BigTreeTech-BTT002/Configuration.h b/config/examples/Prusa/MK3S-BigTreeTech-BTT002/Configuration.h index 6e01d998d2..132a9d0215 100644 --- a/config/examples/Prusa/MK3S-BigTreeTech-BTT002/Configuration.h +++ b/config/examples/Prusa/MK3S-BigTreeTech-BTT002/Configuration.h @@ -1691,7 +1691,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1727,7 +1727,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 23, 5, 0 } +#define NOZZLE_TO_PROBE_OFFSET { 23, 5, 0 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/Qidi/Qidi 1/Configuration.h b/config/examples/Qidi/Qidi 1/Configuration.h index 3398938237..842ce1dac8 100644 --- a/config/examples/Qidi/Qidi 1/Configuration.h +++ b/config/examples/Qidi/Qidi 1/Configuration.h @@ -1672,7 +1672,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1708,7 +1708,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/Raiscube/A8r/Configuration.h b/config/examples/Raiscube/A8r/Configuration.h index 37f58d275c..73f1cb17ae 100644 --- a/config/examples/Raiscube/A8r/Configuration.h +++ b/config/examples/Raiscube/A8r/Configuration.h @@ -1689,7 +1689,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1734,7 +1734,7 @@ //#define NOZZLE_TO_PROBE_OFFSET { -1, 3, 0 } // ANET A6 with BLTouch/3D-Touch mounted right to the nozzle -#define NOZZLE_TO_PROBE_OFFSET { 39, 0, 0 } +#define NOZZLE_TO_PROBE_OFFSET { 39, 0, 0 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // ANET A6 with BLTouch/3D-Touch betwen Fan and Belt // (mount: https://github.com/ralf-e/ANET_A6_modifications/tree/master/A6_X-Axis) diff --git a/config/examples/RapideLite/RL200/Configuration.h b/config/examples/RapideLite/RL200/Configuration.h index 56bb15329a..ccb7fcc72c 100644 --- a/config/examples/RapideLite/RL200/Configuration.h +++ b/config/examples/RapideLite/RL200/Configuration.h @@ -1671,7 +1671,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1707,7 +1707,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/Renkforce/RF100/Configuration.h b/config/examples/Renkforce/RF100/Configuration.h index 062511b689..7956db99f4 100644 --- a/config/examples/Renkforce/RF100/Configuration.h +++ b/config/examples/Renkforce/RF100/Configuration.h @@ -1676,7 +1676,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1712,7 +1712,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/Renkforce/RF100XL/Configuration.h b/config/examples/Renkforce/RF100XL/Configuration.h index ea409ea797..0e69be6978 100644 --- a/config/examples/Renkforce/RF100XL/Configuration.h +++ b/config/examples/Renkforce/RF100XL/Configuration.h @@ -1676,7 +1676,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1712,7 +1712,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/Renkforce/RF100v2/Configuration.h b/config/examples/Renkforce/RF100v2/Configuration.h index 5ea46d5592..52de691e83 100644 --- a/config/examples/Renkforce/RF100v2/Configuration.h +++ b/config/examples/Renkforce/RF100v2/Configuration.h @@ -1676,7 +1676,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1712,7 +1712,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/RepRapPro/Huxley/Configuration.h b/config/examples/RepRapPro/Huxley/Configuration.h index 0dccf33bd8..1c9f107b98 100644 --- a/config/examples/RepRapPro/Huxley/Configuration.h +++ b/config/examples/RepRapPro/Huxley/Configuration.h @@ -1712,7 +1712,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1748,7 +1748,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/RepRapWorld/Megatronics/Configuration.h b/config/examples/RepRapWorld/Megatronics/Configuration.h index 2516c16db9..a790e30fad 100644 --- a/config/examples/RepRapWorld/Megatronics/Configuration.h +++ b/config/examples/RepRapWorld/Megatronics/Configuration.h @@ -1671,7 +1671,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1707,7 +1707,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { -25, -29, -12.35 } +#define NOZZLE_TO_PROBE_OFFSET { -25, -29, -12.35 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/RepRapWorld/Minitronics11/Configuration.h b/config/examples/RepRapWorld/Minitronics11/Configuration.h index 1bea2cc7d7..d7e0f10b24 100644 --- a/config/examples/RepRapWorld/Minitronics11/Configuration.h +++ b/config/examples/RepRapWorld/Minitronics11/Configuration.h @@ -1671,7 +1671,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1707,7 +1707,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/RepRapWorld/Minitronics20/CNC/Configuration.h b/config/examples/RepRapWorld/Minitronics20/CNC/Configuration.h index 4dad603f71..4e521a5a9a 100644 --- a/config/examples/RepRapWorld/Minitronics20/CNC/Configuration.h +++ b/config/examples/RepRapWorld/Minitronics20/CNC/Configuration.h @@ -1671,7 +1671,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1707,7 +1707,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/RigidBot/Configuration.h b/config/examples/RigidBot/Configuration.h index d1326fd2f9..61361ebd49 100644 --- a/config/examples/RigidBot/Configuration.h +++ b/config/examples/RigidBot/Configuration.h @@ -1685,7 +1685,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1721,7 +1721,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { -25, -29, -12.35 } +#define NOZZLE_TO_PROBE_OFFSET { -25, -29, -12.35 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/Robo3D/R1+/Configuration.h b/config/examples/Robo3D/R1+/Configuration.h index 2d724ad945..ceb48eacd1 100644 --- a/config/examples/Robo3D/R1+/Configuration.h +++ b/config/examples/Robo3D/R1+/Configuration.h @@ -1671,7 +1671,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1707,7 +1707,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/Rolohaun/Rook MK1/Configuration.h b/config/examples/Rolohaun/Rook MK1/Configuration.h index b5f529278b..833b570785 100644 --- a/config/examples/Rolohaun/Rook MK1/Configuration.h +++ b/config/examples/Rolohaun/Rook MK1/Configuration.h @@ -1671,7 +1671,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1707,7 +1707,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/SCARA/MP_SCARA/Configuration.h b/config/examples/SCARA/MP_SCARA/Configuration.h index 710e7b010b..506171ac40 100644 --- a/config/examples/SCARA/MP_SCARA/Configuration.h +++ b/config/examples/SCARA/MP_SCARA/Configuration.h @@ -1673,7 +1673,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1709,7 +1709,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { -25, -29, -12.35 } +#define NOZZLE_TO_PROBE_OFFSET { -25, -29, -12.35 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/SCARA/Morgan/Configuration.h b/config/examples/SCARA/Morgan/Configuration.h index 769de1d66c..0cf56ff9fa 100644 --- a/config/examples/SCARA/Morgan/Configuration.h +++ b/config/examples/SCARA/Morgan/Configuration.h @@ -1672,7 +1672,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1708,7 +1708,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { -25, -29, -12.35 } +#define NOZZLE_TO_PROBE_OFFSET { -25, -29, -12.35 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/STM32/Black_STM32F407VET6/Configuration.h b/config/examples/STM32/Black_STM32F407VET6/Configuration.h index f035b34093..f41c07e435 100644 --- a/config/examples/STM32/Black_STM32F407VET6/Configuration.h +++ b/config/examples/STM32/Black_STM32F407VET6/Configuration.h @@ -1671,7 +1671,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1707,7 +1707,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/STM32/STM32F103RE/Configuration.h b/config/examples/STM32/STM32F103RE/Configuration.h index 09d8a03f8c..cbfb09d09b 100644 --- a/config/examples/STM32/STM32F103RE/Configuration.h +++ b/config/examples/STM32/STM32F103RE/Configuration.h @@ -1671,7 +1671,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1707,7 +1707,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { -25, -29, -12.35 } +#define NOZZLE_TO_PROBE_OFFSET { -25, -29, -12.35 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/Simax/Mi-M200/Configuration.h b/config/examples/Simax/Mi-M200/Configuration.h index 3b1310b29e..e111131906 100644 --- a/config/examples/Simax/Mi-M200/Configuration.h +++ b/config/examples/Simax/Mi-M200/Configuration.h @@ -1672,7 +1672,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1708,7 +1708,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 0, 18, -1.5 } +#define NOZZLE_TO_PROBE_OFFSET { 0, 18, -1.5 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/Simulator/Configuration.h b/config/examples/Simulator/Configuration.h index 8a8e168761..decbc0a83f 100644 --- a/config/examples/Simulator/Configuration.h +++ b/config/examples/Simulator/Configuration.h @@ -1687,7 +1687,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1723,7 +1723,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { -20, 0, -2 } +#define NOZZLE_TO_PROBE_OFFSET { -20, 0, -2 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/Sovol/SV-01/BigTreeTech SKR E3 Turbo/Configuration.h b/config/examples/Sovol/SV-01/BigTreeTech SKR E3 Turbo/Configuration.h index 026790aa1c..5b919e1dfe 100644 --- a/config/examples/Sovol/SV-01/BigTreeTech SKR E3 Turbo/Configuration.h +++ b/config/examples/Sovol/SV-01/BigTreeTech SKR E3 Turbo/Configuration.h @@ -1679,7 +1679,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1715,7 +1715,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { -28, -0, 0 } +#define NOZZLE_TO_PROBE_OFFSET { -28, -0, 0 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/Sovol/SV-01/BigTreeTech SKR Mini E3 2.0/Configuration.h b/config/examples/Sovol/SV-01/BigTreeTech SKR Mini E3 2.0/Configuration.h index ada2f78eb8..ae9999dbc6 100644 --- a/config/examples/Sovol/SV-01/BigTreeTech SKR Mini E3 2.0/Configuration.h +++ b/config/examples/Sovol/SV-01/BigTreeTech SKR Mini E3 2.0/Configuration.h @@ -1677,7 +1677,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1713,7 +1713,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { -28, 0, 0 } +#define NOZZLE_TO_PROBE_OFFSET { -28, 0, 0 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/Sovol/SV-01/BigTreeTech SKR Mini E3 3.0/Configuration.h b/config/examples/Sovol/SV-01/BigTreeTech SKR Mini E3 3.0/Configuration.h index 30b2d11577..ed49d79227 100644 --- a/config/examples/Sovol/SV-01/BigTreeTech SKR Mini E3 3.0/Configuration.h +++ b/config/examples/Sovol/SV-01/BigTreeTech SKR Mini E3 3.0/Configuration.h @@ -1679,7 +1679,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1715,7 +1715,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { -20, 0, 0 } +#define NOZZLE_TO_PROBE_OFFSET { -20, 0, 0 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/Sovol/SV-01/CrealityV22/Configuration.h b/config/examples/Sovol/SV-01/CrealityV22/Configuration.h index 6072ec6c9e..74c61dd98c 100644 --- a/config/examples/Sovol/SV-01/CrealityV22/Configuration.h +++ b/config/examples/Sovol/SV-01/CrealityV22/Configuration.h @@ -1676,7 +1676,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1712,7 +1712,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { -33.5, -3.5, 0 } +#define NOZZLE_TO_PROBE_OFFSET { -33.5, -3.5, 0 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/Sovol/SV-01/CrealityV221/Configuration.h b/config/examples/Sovol/SV-01/CrealityV221/Configuration.h index 054c16d972..fe6752a715 100644 --- a/config/examples/Sovol/SV-01/CrealityV221/Configuration.h +++ b/config/examples/Sovol/SV-01/CrealityV221/Configuration.h @@ -1676,7 +1676,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1712,7 +1712,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { -33.5, -3.5, 0 } +#define NOZZLE_TO_PROBE_OFFSET { -33.5, -3.5, 0 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/Sovol/SV-02/Configuration.h b/config/examples/Sovol/SV-02/Configuration.h index 4ac0d06450..c2e863eb27 100644 --- a/config/examples/Sovol/SV-02/Configuration.h +++ b/config/examples/Sovol/SV-02/Configuration.h @@ -1676,7 +1676,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1712,7 +1712,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { -33.5, -3.5, 0 } +#define NOZZLE_TO_PROBE_OFFSET { -33.5, -3.5, 0 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/Sovol/SV-03/Configuration.h b/config/examples/Sovol/SV-03/Configuration.h index 06b0b72000..7b1454ec5f 100644 --- a/config/examples/Sovol/SV-03/Configuration.h +++ b/config/examples/Sovol/SV-03/Configuration.h @@ -1671,7 +1671,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1707,7 +1707,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { -31, -10, 0 } +#define NOZZLE_TO_PROBE_OFFSET { -31, -10, 0 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/Sovol/SV-05/Configuration.h b/config/examples/Sovol/SV-05/Configuration.h index a97d0f9c7f..60bd7f516b 100644 --- a/config/examples/Sovol/SV-05/Configuration.h +++ b/config/examples/Sovol/SV-05/Configuration.h @@ -1671,7 +1671,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1707,7 +1707,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 40, 5, 0 } +#define NOZZLE_TO_PROBE_OFFSET { 40, 5, 0 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/Sovol/SV-06 Plus/Configuration.h b/config/examples/Sovol/SV-06 Plus/Configuration.h index 1a207dcfb9..8c9a2a91e3 100644 --- a/config/examples/Sovol/SV-06 Plus/Configuration.h +++ b/config/examples/Sovol/SV-06 Plus/Configuration.h @@ -1675,7 +1675,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1711,7 +1711,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 25, -25, 0 } +#define NOZZLE_TO_PROBE_OFFSET { 25, -25, 0 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/Sovol/SV-06/Configuration.h b/config/examples/Sovol/SV-06/Configuration.h index c07ef4dead..eb2e30f3f5 100644 --- a/config/examples/Sovol/SV-06/Configuration.h +++ b/config/examples/Sovol/SV-06/Configuration.h @@ -1671,7 +1671,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1707,7 +1707,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 27, -20, 0 } +#define NOZZLE_TO_PROBE_OFFSET { 27, -20, 0 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/Sunlu/S8/Configuration.h b/config/examples/Sunlu/S8/Configuration.h index 48ca88de15..2b919bef4e 100644 --- a/config/examples/Sunlu/S8/Configuration.h +++ b/config/examples/Sunlu/S8/Configuration.h @@ -1671,7 +1671,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1707,7 +1707,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/Sunlu/T3/Configuration.h b/config/examples/Sunlu/T3/Configuration.h index 16e976bb36..7c15daa6a1 100644 --- a/config/examples/Sunlu/T3/Configuration.h +++ b/config/examples/Sunlu/T3/Configuration.h @@ -1671,7 +1671,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1707,7 +1707,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { -28.5, 4, -1.96 } +#define NOZZLE_TO_PROBE_OFFSET { -28.5, 4, -1.96 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/TPARA/AXEL_TPARA/Configuration.h b/config/examples/TPARA/AXEL_TPARA/Configuration.h index e48754794f..b2f80ff68f 100644 --- a/config/examples/TPARA/AXEL_TPARA/Configuration.h +++ b/config/examples/TPARA/AXEL_TPARA/Configuration.h @@ -1678,7 +1678,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1714,7 +1714,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { -25, -29, -12.35 } +#define NOZZLE_TO_PROBE_OFFSET { -25, -29, -12.35 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/Tevo/Michelangelo/Configuration.h b/config/examples/Tevo/Michelangelo/Configuration.h index 4ff13e009c..0cd6f43f4c 100644 --- a/config/examples/Tevo/Michelangelo/Configuration.h +++ b/config/examples/Tevo/Michelangelo/Configuration.h @@ -1672,7 +1672,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1708,7 +1708,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/Tevo/Nereus/Configuration.h b/config/examples/Tevo/Nereus/Configuration.h index 66904e4034..10c0bcd646 100644 --- a/config/examples/Tevo/Nereus/Configuration.h +++ b/config/examples/Tevo/Nereus/Configuration.h @@ -1672,7 +1672,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1708,7 +1708,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/Tevo/Tarantula Pro/MKS Gen_L/Configuration.h b/config/examples/Tevo/Tarantula Pro/MKS Gen_L/Configuration.h index ec28b52109..066e510510 100644 --- a/config/examples/Tevo/Tarantula Pro/MKS Gen_L/Configuration.h +++ b/config/examples/Tevo/Tarantula Pro/MKS Gen_L/Configuration.h @@ -1672,7 +1672,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1708,7 +1708,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 0, 18, -1.5 } +#define NOZZLE_TO_PROBE_OFFSET { 0, 18, -1.5 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/Tevo/Tarantula Pro/MKS SGen_L/Configuration.h b/config/examples/Tevo/Tarantula Pro/MKS SGen_L/Configuration.h index 21ccb0e063..e43940f37c 100644 --- a/config/examples/Tevo/Tarantula Pro/MKS SGen_L/Configuration.h +++ b/config/examples/Tevo/Tarantula Pro/MKS SGen_L/Configuration.h @@ -1672,7 +1672,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1708,7 +1708,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 0, 18, -1.5 } +#define NOZZLE_TO_PROBE_OFFSET { 0, 18, -1.5 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration.h b/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration.h index a841d8351e..91b4238321 100644 --- a/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration.h +++ b/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration.h @@ -1672,7 +1672,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1708,7 +1708,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { -45, -12, -2.77 } +#define NOZZLE_TO_PROBE_OFFSET { -45, -12, -2.77 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/Tevo/Tornado/V2 (MKS Gen_L)/Configuration.h b/config/examples/Tevo/Tornado/V2 (MKS Gen_L)/Configuration.h index c02921d491..9649b3be4f 100644 --- a/config/examples/Tevo/Tornado/V2 (MKS Gen_L)/Configuration.h +++ b/config/examples/Tevo/Tornado/V2 (MKS Gen_L)/Configuration.h @@ -1672,7 +1672,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1708,7 +1708,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { -45, -12, -2.77 } +#define NOZZLE_TO_PROBE_OFFSET { -45, -12, -2.77 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/Tinkerine/Ditto Pro/RAMPS 1.4/Configuration.h b/config/examples/Tinkerine/Ditto Pro/RAMPS 1.4/Configuration.h index 5d90d5ca40..6d4a4a7882 100644 --- a/config/examples/Tinkerine/Ditto Pro/RAMPS 1.4/Configuration.h +++ b/config/examples/Tinkerine/Ditto Pro/RAMPS 1.4/Configuration.h @@ -1671,7 +1671,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1707,7 +1707,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/TinyBoy2/Configuration.h b/config/examples/TinyBoy2/Configuration.h index 40b09516b2..c503f438f1 100644 --- a/config/examples/TinyBoy2/Configuration.h +++ b/config/examples/TinyBoy2/Configuration.h @@ -1711,7 +1711,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1747,7 +1747,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 34, 15, 0 } +#define NOZZLE_TO_PROBE_OFFSET { 34, 15, 0 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/Tronxy/D01/CXY-v6-191017 board/Configuration.h b/config/examples/Tronxy/D01/CXY-v6-191017 board/Configuration.h index 84db59a246..9371e6a210 100644 --- a/config/examples/Tronxy/D01/CXY-v6-191017 board/Configuration.h +++ b/config/examples/Tronxy/D01/CXY-v6-191017 board/Configuration.h @@ -1680,7 +1680,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1716,7 +1716,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/Tronxy/X1/Configuration.h b/config/examples/Tronxy/X1/Configuration.h index a21aef5e6e..efa2b9a5d6 100644 --- a/config/examples/Tronxy/X1/Configuration.h +++ b/config/examples/Tronxy/X1/Configuration.h @@ -1672,7 +1672,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1708,7 +1708,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/Tronxy/X3A/Configuration.h b/config/examples/Tronxy/X3A/Configuration.h index 7f87ae36df..62ef6599ee 100644 --- a/config/examples/Tronxy/X3A/Configuration.h +++ b/config/examples/Tronxy/X3A/Configuration.h @@ -1671,7 +1671,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1707,7 +1707,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { -32, -10, -0.5 } +#define NOZZLE_TO_PROBE_OFFSET { -32, -10, -0.5 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/Tronxy/X5S-2E/Green Board (Chitu V5)/Configuration.h b/config/examples/Tronxy/X5S-2E/Green Board (Chitu V5)/Configuration.h index d576883b72..f619ec6b9d 100644 --- a/config/examples/Tronxy/X5S-2E/Green Board (Chitu V5)/Configuration.h +++ b/config/examples/Tronxy/X5S-2E/Green Board (Chitu V5)/Configuration.h @@ -1672,7 +1672,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset diff --git a/config/examples/Tronxy/X5S-2E/Red Board (Tronxy 3.1.0)/Configuration.h b/config/examples/Tronxy/X5S-2E/Red Board (Tronxy 3.1.0)/Configuration.h index 613fc7a0bd..b5049bd17e 100644 --- a/config/examples/Tronxy/X5S-2E/Red Board (Tronxy 3.1.0)/Configuration.h +++ b/config/examples/Tronxy/X5S-2E/Red Board (Tronxy 3.1.0)/Configuration.h @@ -1680,7 +1680,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1716,7 +1716,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/Tronxy/X5S/Configuration.h b/config/examples/Tronxy/X5S/Configuration.h index 2811538e95..7d446c9b13 100644 --- a/config/examples/Tronxy/X5S/Configuration.h +++ b/config/examples/Tronxy/X5S/Configuration.h @@ -1671,7 +1671,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1707,7 +1707,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { -45, -55, -0 } +#define NOZZLE_TO_PROBE_OFFSET { -45, -55, -0 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/Tronxy/X5SA Pro/Configuration.h b/config/examples/Tronxy/X5SA Pro/Configuration.h index dee964bc9a..f634c4616f 100644 --- a/config/examples/Tronxy/X5SA Pro/Configuration.h +++ b/config/examples/Tronxy/X5SA Pro/Configuration.h @@ -1661,7 +1661,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1698,7 +1698,7 @@ * O-- FRONT --+ */ // Nozzle is 38.5mm to the left of nozzle and 10mm in front. It triggers when the nozzle is 6.14mm above the bed, but use 6.0 for safety. -#define NOZZLE_TO_PROBE_OFFSET { -38.5, -10, 0 } +#define NOZZLE_TO_PROBE_OFFSET { -38.5, -10, 0 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/Tronxy/X5SA-2E/Configuration.h b/config/examples/Tronxy/X5SA-2E/Configuration.h index a689c9119e..018d6275ba 100644 --- a/config/examples/Tronxy/X5SA-2E/Configuration.h +++ b/config/examples/Tronxy/X5SA-2E/Configuration.h @@ -1673,7 +1673,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1709,7 +1709,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { -31.6, 3.7, 0 } +#define NOZZLE_TO_PROBE_OFFSET { -31.6, 3.7, 0 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/Tronxy/X5SA/Configuration.h b/config/examples/Tronxy/X5SA/Configuration.h index e2b36e06bd..0277da30f6 100644 --- a/config/examples/Tronxy/X5SA/Configuration.h +++ b/config/examples/Tronxy/X5SA/Configuration.h @@ -1673,7 +1673,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1709,7 +1709,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { -40, 0, 0 } +#define NOZZLE_TO_PROBE_OFFSET { -40, 0, 0 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/Tronxy/XY100/Configuration.h b/config/examples/Tronxy/XY100/Configuration.h index 87f38cdea6..2f97dcb451 100644 --- a/config/examples/Tronxy/XY100/Configuration.h +++ b/config/examples/Tronxy/XY100/Configuration.h @@ -1678,7 +1678,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1714,7 +1714,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/Tronxy/XY2-Pro/Configuration.h b/config/examples/Tronxy/XY2-Pro/Configuration.h index 044477995f..8374a1fa6a 100644 --- a/config/examples/Tronxy/XY2-Pro/Configuration.h +++ b/config/examples/Tronxy/XY2-Pro/Configuration.h @@ -1707,7 +1707,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1743,7 +1743,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { -50, -10, 0 } +#define NOZZLE_TO_PROBE_OFFSET { -50, -10, 0 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/Turnigy/Fabrikator/Configuration.h b/config/examples/Turnigy/Fabrikator/Configuration.h index 7e32dfaef4..4246f549d6 100644 --- a/config/examples/Turnigy/Fabrikator/Configuration.h +++ b/config/examples/Turnigy/Fabrikator/Configuration.h @@ -1671,7 +1671,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1707,7 +1707,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/Two Trees/BlueR Plus/Configuration.h b/config/examples/Two Trees/BlueR Plus/Configuration.h index fe64facc1a..eb8d337ec0 100644 --- a/config/examples/Two Trees/BlueR Plus/Configuration.h +++ b/config/examples/Two Trees/BlueR Plus/Configuration.h @@ -1673,7 +1673,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1709,7 +1709,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 18, 28.5, -2.8 } +#define NOZZLE_TO_PROBE_OFFSET { 18, 28.5, -2.8 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/Two Trees/BlueR/BlueR V1/Configuration.h b/config/examples/Two Trees/BlueR/BlueR V1/Configuration.h index 36e708ea87..e0b1b20889 100644 --- a/config/examples/Two Trees/BlueR/BlueR V1/Configuration.h +++ b/config/examples/Two Trees/BlueR/BlueR V1/Configuration.h @@ -1690,7 +1690,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1726,7 +1726,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/Two Trees/BlueR/BlueR V2/Configuration.h b/config/examples/Two Trees/BlueR/BlueR V2/Configuration.h index 27ffea575f..7d155490b1 100644 --- a/config/examples/Two Trees/BlueR/BlueR V2/Configuration.h +++ b/config/examples/Two Trees/BlueR/BlueR V2/Configuration.h @@ -1691,7 +1691,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1727,7 +1727,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/Two Trees/BlueR/BlueR V3/Configuration.h b/config/examples/Two Trees/BlueR/BlueR V3/Configuration.h index 84eb6e9957..446b98b4d8 100644 --- a/config/examples/Two Trees/BlueR/BlueR V3/Configuration.h +++ b/config/examples/Two Trees/BlueR/BlueR V3/Configuration.h @@ -1702,7 +1702,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1738,7 +1738,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/Two Trees/SP-5_V3/Configuration.h b/config/examples/Two Trees/SP-5_V3/Configuration.h index 3ea5f2a042..2a400ff2ad 100644 --- a/config/examples/Two Trees/SP-5_V3/Configuration.h +++ b/config/examples/Two Trees/SP-5_V3/Configuration.h @@ -1671,7 +1671,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1707,7 +1707,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2.1/Configuration.h b/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2.1/Configuration.h index c44987109c..c44afaec50 100644 --- a/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2.1/Configuration.h +++ b/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2.1/Configuration.h @@ -1693,7 +1693,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset diff --git a/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2/Configuration.h b/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2/Configuration.h index 7103ca634e..2a883b9661 100644 --- a/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2/Configuration.h +++ b/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2/Configuration.h @@ -1693,7 +1693,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset diff --git a/config/examples/Two Trees/Sapphire Pro/Configuration.h b/config/examples/Two Trees/Sapphire Pro/Configuration.h index 13073c4db4..de79a629d0 100644 --- a/config/examples/Two Trees/Sapphire Pro/Configuration.h +++ b/config/examples/Two Trees/Sapphire Pro/Configuration.h @@ -1688,7 +1688,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1724,7 +1724,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 0, -42, 0 } +#define NOZZLE_TO_PROBE_OFFSET { 0, -42, 0 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/UltiMachine/Archim1/Configuration.h b/config/examples/UltiMachine/Archim1/Configuration.h index a2ece18106..a3e42aaeed 100644 --- a/config/examples/UltiMachine/Archim1/Configuration.h +++ b/config/examples/UltiMachine/Archim1/Configuration.h @@ -1671,7 +1671,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1707,7 +1707,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/UltiMachine/Archim2/Configuration.h b/config/examples/UltiMachine/Archim2/Configuration.h index da93d44bc7..9943b72376 100644 --- a/config/examples/UltiMachine/Archim2/Configuration.h +++ b/config/examples/UltiMachine/Archim2/Configuration.h @@ -1671,7 +1671,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1707,7 +1707,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/Ultimaker/Ultimaker 2+/Configuration.h b/config/examples/Ultimaker/Ultimaker 2+/Configuration.h index ecd53dc464..7eafcb701c 100644 --- a/config/examples/Ultimaker/Ultimaker 2+/Configuration.h +++ b/config/examples/Ultimaker/Ultimaker 2+/Configuration.h @@ -1674,7 +1674,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1710,7 +1710,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 0, 0, 0 } +#define NOZZLE_TO_PROBE_OFFSET { 0, 0, 0 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/Ultimaker/Ultimaker 2/Configuration.h b/config/examples/Ultimaker/Ultimaker 2/Configuration.h index 1fad8b2662..ed28eec6a8 100644 --- a/config/examples/Ultimaker/Ultimaker 2/Configuration.h +++ b/config/examples/Ultimaker/Ultimaker 2/Configuration.h @@ -1686,7 +1686,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1722,7 +1722,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/Ultimaker/Ultimaker Original (1.5.7)/Configuration.h b/config/examples/Ultimaker/Ultimaker Original (1.5.7)/Configuration.h index e8f825a057..d90e485c97 100644 --- a/config/examples/Ultimaker/Ultimaker Original (1.5.7)/Configuration.h +++ b/config/examples/Ultimaker/Ultimaker Original (1.5.7)/Configuration.h @@ -1671,7 +1671,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1707,7 +1707,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/Ultimaker/Ultimaker Original Plus (2.1.1)/Configuration.h b/config/examples/Ultimaker/Ultimaker Original Plus (2.1.1)/Configuration.h index 7250398d61..02a561eee2 100644 --- a/config/examples/Ultimaker/Ultimaker Original Plus (2.1.1)/Configuration.h +++ b/config/examples/Ultimaker/Ultimaker Original Plus (2.1.1)/Configuration.h @@ -1674,7 +1674,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1710,7 +1710,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 0, 0, 0 } +#define NOZZLE_TO_PROBE_OFFSET { 0, 0, 0 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/Ultimaker/Ultimaker Original Plus DXU/Configuration.h b/config/examples/Ultimaker/Ultimaker Original Plus DXU/Configuration.h index b9e9888315..22fdfdf6b3 100644 --- a/config/examples/Ultimaker/Ultimaker Original Plus DXU/Configuration.h +++ b/config/examples/Ultimaker/Ultimaker Original Plus DXU/Configuration.h @@ -1675,7 +1675,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1711,7 +1711,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 9, -19.5, -1 } +#define NOZZLE_TO_PROBE_OFFSET { 9, -19.5, -1 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/VORONDesign/Configuration.h b/config/examples/VORONDesign/Configuration.h index 1c51eab8ca..20d7838f9c 100644 --- a/config/examples/VORONDesign/Configuration.h +++ b/config/examples/VORONDesign/Configuration.h @@ -1671,7 +1671,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1707,7 +1707,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 0, 0, 0 } +#define NOZZLE_TO_PROBE_OFFSET { 0, 0, 0 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/Velleman/K8200 Upgraded/Configuration.h b/config/examples/Velleman/K8200 Upgraded/Configuration.h index 4c793de0c0..edb464ae06 100644 --- a/config/examples/Velleman/K8200 Upgraded/Configuration.h +++ b/config/examples/Velleman/K8200 Upgraded/Configuration.h @@ -1704,7 +1704,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1740,7 +1740,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/Velleman/K8200/Configuration.h b/config/examples/Velleman/K8200/Configuration.h index 6c9dfe3672..3278032d57 100644 --- a/config/examples/Velleman/K8200/Configuration.h +++ b/config/examples/Velleman/K8200/Configuration.h @@ -1706,7 +1706,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1742,7 +1742,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/Velleman/K8400/Dual-head/Configuration.h b/config/examples/Velleman/K8400/Dual-head/Configuration.h index 7d2dd4b063..79e8e561ad 100644 --- a/config/examples/Velleman/K8400/Dual-head/Configuration.h +++ b/config/examples/Velleman/K8400/Dual-head/Configuration.h @@ -1672,7 +1672,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1708,7 +1708,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/Velleman/K8400/Single-head/Configuration.h b/config/examples/Velleman/K8400/Single-head/Configuration.h index 6d0138eff0..4436f1d869 100644 --- a/config/examples/Velleman/K8400/Single-head/Configuration.h +++ b/config/examples/Velleman/K8400/Single-head/Configuration.h @@ -1672,7 +1672,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1708,7 +1708,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/Voxelab/Aquila/BigTreeTech SKR Mini E3 2.0/Configuration.h b/config/examples/Voxelab/Aquila/BigTreeTech SKR Mini E3 2.0/Configuration.h index d41a993289..1069b041bf 100644 --- a/config/examples/Voxelab/Aquila/BigTreeTech SKR Mini E3 2.0/Configuration.h +++ b/config/examples/Voxelab/Aquila/BigTreeTech SKR Mini E3 2.0/Configuration.h @@ -1672,7 +1672,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1708,7 +1708,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/WASP/PowerWASP/Configuration.h b/config/examples/WASP/PowerWASP/Configuration.h index 27c69973f0..6f8be9cbd5 100644 --- a/config/examples/WASP/PowerWASP/Configuration.h +++ b/config/examples/WASP/PowerWASP/Configuration.h @@ -1685,7 +1685,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1721,7 +1721,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/Wanhao/Duplicator 4S/Configuration.h b/config/examples/Wanhao/Duplicator 4S/Configuration.h index 71a45932c2..d2041c2052 100644 --- a/config/examples/Wanhao/Duplicator 4S/Configuration.h +++ b/config/examples/Wanhao/Duplicator 4S/Configuration.h @@ -1671,7 +1671,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1707,7 +1707,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/Wanhao/Duplicator 6/Configuration.h b/config/examples/Wanhao/Duplicator 6/Configuration.h index 5ce7cc4908..ed8a1e5dbf 100644 --- a/config/examples/Wanhao/Duplicator 6/Configuration.h +++ b/config/examples/Wanhao/Duplicator 6/Configuration.h @@ -1671,7 +1671,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1707,7 +1707,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/Wanhao/Duplicator 9/MK1/300/Configuration.h b/config/examples/Wanhao/Duplicator 9/MK1/300/Configuration.h index 0f9623edc6..7cb7c3c13b 100644 --- a/config/examples/Wanhao/Duplicator 9/MK1/300/Configuration.h +++ b/config/examples/Wanhao/Duplicator 9/MK1/300/Configuration.h @@ -1671,7 +1671,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1707,7 +1707,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 25, -5, -1.3 } +#define NOZZLE_TO_PROBE_OFFSET { 25, -5, -1.3 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/Wanhao/Duplicator 9/MK1/400/Configuration.h b/config/examples/Wanhao/Duplicator 9/MK1/400/Configuration.h index f6a916696b..d488fd596c 100644 --- a/config/examples/Wanhao/Duplicator 9/MK1/400/Configuration.h +++ b/config/examples/Wanhao/Duplicator 9/MK1/400/Configuration.h @@ -1671,7 +1671,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1707,7 +1707,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 25, -5, -1.3 } +#define NOZZLE_TO_PROBE_OFFSET { 25, -5, -1.3 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/Wanhao/Duplicator 9/MK1/500/Configuration.h b/config/examples/Wanhao/Duplicator 9/MK1/500/Configuration.h index cc2ed14eab..4d8edc42a5 100644 --- a/config/examples/Wanhao/Duplicator 9/MK1/500/Configuration.h +++ b/config/examples/Wanhao/Duplicator 9/MK1/500/Configuration.h @@ -1671,7 +1671,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1707,7 +1707,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 25, -5, -1.3 } +#define NOZZLE_TO_PROBE_OFFSET { 25, -5, -1.3 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/Wanhao/Duplicator 9/MK1u2/300/Configuration.h b/config/examples/Wanhao/Duplicator 9/MK1u2/300/Configuration.h index 434752852d..d49d88e51c 100644 --- a/config/examples/Wanhao/Duplicator 9/MK1u2/300/Configuration.h +++ b/config/examples/Wanhao/Duplicator 9/MK1u2/300/Configuration.h @@ -1671,7 +1671,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1707,7 +1707,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 25, -20, -1.3 } +#define NOZZLE_TO_PROBE_OFFSET { 25, -20, -1.3 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/Wanhao/Duplicator 9/MK1u2/400/Configuration.h b/config/examples/Wanhao/Duplicator 9/MK1u2/400/Configuration.h index 94d2484028..392bc0dea1 100644 --- a/config/examples/Wanhao/Duplicator 9/MK1u2/400/Configuration.h +++ b/config/examples/Wanhao/Duplicator 9/MK1u2/400/Configuration.h @@ -1671,7 +1671,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1707,7 +1707,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 25, -20, -1.3 } +#define NOZZLE_TO_PROBE_OFFSET { 25, -20, -1.3 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/Wanhao/Duplicator 9/MK1u2/500/Configuration.h b/config/examples/Wanhao/Duplicator 9/MK1u2/500/Configuration.h index 4bb315001f..94faf08909 100644 --- a/config/examples/Wanhao/Duplicator 9/MK1u2/500/Configuration.h +++ b/config/examples/Wanhao/Duplicator 9/MK1u2/500/Configuration.h @@ -1671,7 +1671,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1707,7 +1707,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 25, -20, -1.3 } +#define NOZZLE_TO_PROBE_OFFSET { 25, -20, -1.3 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/Wanhao/Duplicator 9/MK2/300/Configuration.h b/config/examples/Wanhao/Duplicator 9/MK2/300/Configuration.h index e0feca72d5..28bec5b0c6 100644 --- a/config/examples/Wanhao/Duplicator 9/MK2/300/Configuration.h +++ b/config/examples/Wanhao/Duplicator 9/MK2/300/Configuration.h @@ -1671,7 +1671,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1707,7 +1707,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 25, -5, -1.3 } +#define NOZZLE_TO_PROBE_OFFSET { 25, -5, -1.3 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/Wanhao/Duplicator 9/MK2/400/Configuration.h b/config/examples/Wanhao/Duplicator 9/MK2/400/Configuration.h index 796512a432..3855b8b3de 100644 --- a/config/examples/Wanhao/Duplicator 9/MK2/400/Configuration.h +++ b/config/examples/Wanhao/Duplicator 9/MK2/400/Configuration.h @@ -1671,7 +1671,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1707,7 +1707,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 25, -5, -1.3 } +#define NOZZLE_TO_PROBE_OFFSET { 25, -5, -1.3 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/Wanhao/Duplicator 9/MK2/500/Configuration.h b/config/examples/Wanhao/Duplicator 9/MK2/500/Configuration.h index 7c7a5b2da2..e4fb1ba246 100644 --- a/config/examples/Wanhao/Duplicator 9/MK2/500/Configuration.h +++ b/config/examples/Wanhao/Duplicator 9/MK2/500/Configuration.h @@ -1671,7 +1671,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1707,7 +1707,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 25, -5, -1.3 } +#define NOZZLE_TO_PROBE_OFFSET { 25, -5, -1.3 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/Wanhao/Duplicator 9/MK3/300/Configuration.h b/config/examples/Wanhao/Duplicator 9/MK3/300/Configuration.h index 40899f9378..85b2b2f2e2 100644 --- a/config/examples/Wanhao/Duplicator 9/MK3/300/Configuration.h +++ b/config/examples/Wanhao/Duplicator 9/MK3/300/Configuration.h @@ -1671,7 +1671,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1707,7 +1707,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 25, -5, -1.3 } +#define NOZZLE_TO_PROBE_OFFSET { 25, -5, -1.3 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/Wanhao/Duplicator 9/MK3/400/Configuration.h b/config/examples/Wanhao/Duplicator 9/MK3/400/Configuration.h index 16d99f6f46..8ceffb1333 100644 --- a/config/examples/Wanhao/Duplicator 9/MK3/400/Configuration.h +++ b/config/examples/Wanhao/Duplicator 9/MK3/400/Configuration.h @@ -1671,7 +1671,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1707,7 +1707,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 25, -5, -1.3 } +#define NOZZLE_TO_PROBE_OFFSET { 25, -5, -1.3 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/Wanhao/Duplicator 9/MK3/500/Configuration.h b/config/examples/Wanhao/Duplicator 9/MK3/500/Configuration.h index 3104bbb502..c81eb15d6f 100644 --- a/config/examples/Wanhao/Duplicator 9/MK3/500/Configuration.h +++ b/config/examples/Wanhao/Duplicator 9/MK3/500/Configuration.h @@ -1671,7 +1671,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1707,7 +1707,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 25, -5, -1.3 } +#define NOZZLE_TO_PROBE_OFFSET { 25, -5, -1.3 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/Wanhao/Duplicator i3 2.1/Configuration.h b/config/examples/Wanhao/Duplicator i3 2.1/Configuration.h index 7cbcd92969..e4d2d420ef 100644 --- a/config/examples/Wanhao/Duplicator i3 2.1/Configuration.h +++ b/config/examples/Wanhao/Duplicator i3 2.1/Configuration.h @@ -1671,7 +1671,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1707,7 +1707,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/Wanhao/Duplicator i3 Mini/Configuration.h b/config/examples/Wanhao/Duplicator i3 Mini/Configuration.h index 81b7e8968a..e76bcf26b0 100644 --- a/config/examples/Wanhao/Duplicator i3 Mini/Configuration.h +++ b/config/examples/Wanhao/Duplicator i3 Mini/Configuration.h @@ -1672,7 +1672,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1708,7 +1708,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/Wanhao/Duplicator i3 Plus/Configuration.h b/config/examples/Wanhao/Duplicator i3 Plus/Configuration.h index 1e2a9ddcb4..0fc3cd8ce8 100644 --- a/config/examples/Wanhao/Duplicator i3 Plus/Configuration.h +++ b/config/examples/Wanhao/Duplicator i3 Plus/Configuration.h @@ -1671,7 +1671,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1707,7 +1707,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/Weedo/Tina2/V2/Configuration.h b/config/examples/Weedo/Tina2/V2/Configuration.h index 8e37702052..fff28a278e 100644 --- a/config/examples/Weedo/Tina2/V2/Configuration.h +++ b/config/examples/Weedo/Tina2/V2/Configuration.h @@ -1671,7 +1671,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1707,7 +1707,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 29, 2, 0 } +#define NOZZLE_TO_PROBE_OFFSET { 29, 2, 0 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/Weedo/Tina2/V3/Configuration.h b/config/examples/Weedo/Tina2/V3/Configuration.h index 8618f3a1a8..5458263330 100644 --- a/config/examples/Weedo/Tina2/V3/Configuration.h +++ b/config/examples/Weedo/Tina2/V3/Configuration.h @@ -1671,7 +1671,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1707,7 +1707,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 29, 2, 0 } +#define NOZZLE_TO_PROBE_OFFSET { 29, 2, 0 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/Weistek/wt150/Configuration.h b/config/examples/Weistek/wt150/Configuration.h index 0ed7bc8e34..e571eea140 100644 --- a/config/examples/Weistek/wt150/Configuration.h +++ b/config/examples/Weistek/wt150/Configuration.h @@ -1672,7 +1672,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1708,7 +1708,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/Zonestar/P802M/Configuration.h b/config/examples/Zonestar/P802M/Configuration.h index 30fd7d86a9..df775aa0a8 100644 --- a/config/examples/Zonestar/P802M/Configuration.h +++ b/config/examples/Zonestar/P802M/Configuration.h @@ -1671,7 +1671,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1708,7 +1708,7 @@ * O-- FRONT --+ */ //#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } -#define NOZZLE_TO_PROBE_OFFSET { -27.3, -48.7, -3.2 } +#define NOZZLE_TO_PROBE_OFFSET { -27.3, -48.7, -3.2 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (A4988)/Configuration.h b/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (A4988)/Configuration.h index 45fc8a0088..a705ec96cb 100644 --- a/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (A4988)/Configuration.h +++ b/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (A4988)/Configuration.h @@ -1676,7 +1676,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1712,7 +1712,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 40, 0, -7.95 } +#define NOZZLE_TO_PROBE_OFFSET { 40, 0, -7.95 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (TMC2209)/Configuration.h b/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (TMC2209)/Configuration.h index c65ed3b8a7..fa31b95f4d 100644 --- a/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (TMC2209)/Configuration.h +++ b/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (TMC2209)/Configuration.h @@ -1675,7 +1675,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1711,7 +1711,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 40, 0, -7.95 } +#define NOZZLE_TO_PROBE_OFFSET { 40, 0, -7.95 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/delta/Anycubic/Kossel Linear Plus/Configuration.h b/config/examples/delta/Anycubic/Kossel Linear Plus/Configuration.h index 553afd8fc3..4b14bb5838 100644 --- a/config/examples/delta/Anycubic/Kossel Linear Plus/Configuration.h +++ b/config/examples/delta/Anycubic/Kossel Linear Plus/Configuration.h @@ -1736,7 +1736,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset diff --git a/config/examples/delta/Anycubic/Kossel/Configuration.h b/config/examples/delta/Anycubic/Kossel/Configuration.h index 58ebe4e18b..b3625db258 100644 --- a/config/examples/delta/Anycubic/Kossel/Configuration.h +++ b/config/examples/delta/Anycubic/Kossel/Configuration.h @@ -1732,7 +1732,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset diff --git a/config/examples/delta/Anycubic/Predator/Configuration.h b/config/examples/delta/Anycubic/Predator/Configuration.h index 60a32ce958..5909f9e99c 100644 --- a/config/examples/delta/Anycubic/Predator/Configuration.h +++ b/config/examples/delta/Anycubic/Predator/Configuration.h @@ -1679,7 +1679,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1715,7 +1715,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 0, 0, -16.30 } +#define NOZZLE_TO_PROBE_OFFSET { 0, 0, -16.30 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/delta/Dreammaker/Overlord/Configuration.h b/config/examples/delta/Dreammaker/Overlord/Configuration.h index 753567fcc3..30475746c1 100644 --- a/config/examples/delta/Dreammaker/Overlord/Configuration.h +++ b/config/examples/delta/Dreammaker/Overlord/Configuration.h @@ -1678,7 +1678,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1714,7 +1714,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 0, 0, 0.65 } +#define NOZZLE_TO_PROBE_OFFSET { 0, 0, 0.65 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/delta/Dreammaker/Overlord_Pro/Configuration.h b/config/examples/delta/Dreammaker/Overlord_Pro/Configuration.h index b6ffa33637..05e78706fe 100644 --- a/config/examples/delta/Dreammaker/Overlord_Pro/Configuration.h +++ b/config/examples/delta/Dreammaker/Overlord_Pro/Configuration.h @@ -1685,7 +1685,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1721,7 +1721,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 0, 0, 0.65 } +#define NOZZLE_TO_PROBE_OFFSET { 0, 0, 0.65 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/delta/FLSUN/Q5-nano_v1/Configuration.h b/config/examples/delta/FLSUN/Q5-nano_v1/Configuration.h index 8526c67c12..365aea4a91 100644 --- a/config/examples/delta/FLSUN/Q5-nano_v1/Configuration.h +++ b/config/examples/delta/FLSUN/Q5-nano_v1/Configuration.h @@ -1680,7 +1680,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1716,7 +1716,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 0, 0, -19.42 } +#define NOZZLE_TO_PROBE_OFFSET { 0, 0, -19.42 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/delta/FLSUN/Q5-nano_v2/Configuration.h b/config/examples/delta/FLSUN/Q5-nano_v2/Configuration.h index f6782b062a..f0c6a027e1 100644 --- a/config/examples/delta/FLSUN/Q5-nano_v2/Configuration.h +++ b/config/examples/delta/FLSUN/Q5-nano_v2/Configuration.h @@ -1678,7 +1678,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1714,7 +1714,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 0, 0, -18.0 } +#define NOZZLE_TO_PROBE_OFFSET { 0, 0, -18.0 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/delta/FLSUN/QQ-S/Configuration.h b/config/examples/delta/FLSUN/QQ-S/Configuration.h index c1b0e451b9..06fa468e5a 100644 --- a/config/examples/delta/FLSUN/QQ-S/Configuration.h +++ b/config/examples/delta/FLSUN/QQ-S/Configuration.h @@ -1679,7 +1679,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1715,7 +1715,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 0, 0, 0 } +#define NOZZLE_TO_PROBE_OFFSET { 0, 0, 0 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/delta/FLSUN/QQS-Pro/Configuration.h b/config/examples/delta/FLSUN/QQS-Pro/Configuration.h index 2f0a597747..fe0a24bb3f 100644 --- a/config/examples/delta/FLSUN/QQS-Pro/Configuration.h +++ b/config/examples/delta/FLSUN/QQS-Pro/Configuration.h @@ -1679,7 +1679,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1715,7 +1715,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 0, 0, -16.2 } +#define NOZZLE_TO_PROBE_OFFSET { 0, 0, -16.2 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/delta/FLSUN/auto_calibrate/Configuration.h b/config/examples/delta/FLSUN/auto_calibrate/Configuration.h index e7220afa90..c31d7e54ca 100644 --- a/config/examples/delta/FLSUN/auto_calibrate/Configuration.h +++ b/config/examples/delta/FLSUN/auto_calibrate/Configuration.h @@ -1682,7 +1682,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1718,7 +1718,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 0, 0, 0.10 } +#define NOZZLE_TO_PROBE_OFFSET { 0, 0, 0.10 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/delta/FLSUN/kossel/Configuration.h b/config/examples/delta/FLSUN/kossel/Configuration.h index 27daaac009..9893f12f9e 100644 --- a/config/examples/delta/FLSUN/kossel/Configuration.h +++ b/config/examples/delta/FLSUN/kossel/Configuration.h @@ -1681,7 +1681,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1717,7 +1717,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 0, 0, 0.10 } +#define NOZZLE_TO_PROBE_OFFSET { 0, 0, 0.10 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/delta/FLSUN/kossel_mini/Configuration.h b/config/examples/delta/FLSUN/kossel_mini/Configuration.h index 4940a9c49f..f5a459fcd7 100644 --- a/config/examples/delta/FLSUN/kossel_mini/Configuration.h +++ b/config/examples/delta/FLSUN/kossel_mini/Configuration.h @@ -1681,7 +1681,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1717,7 +1717,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 0, 0, 0.25 } +#define NOZZLE_TO_PROBE_OFFSET { 0, 0, 0.25 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/delta/Geeetech/G2/Configuration.h b/config/examples/delta/Geeetech/G2/Configuration.h index 95b91f97de..f18ab9da47 100644 --- a/config/examples/delta/Geeetech/G2/Configuration.h +++ b/config/examples/delta/Geeetech/G2/Configuration.h @@ -1679,7 +1679,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1715,7 +1715,8 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 19, -11, -2 } // G2 { 19, -11, -2 } +// G2 { 19, -11, -2 } +#define NOZZLE_TO_PROBE_OFFSET { 19, -11, -2 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/delta/Geeetech/G2Pro/Configuration.h b/config/examples/delta/Geeetech/G2Pro/Configuration.h index e57bdbfc9c..88d4021d78 100644 --- a/config/examples/delta/Geeetech/G2Pro/Configuration.h +++ b/config/examples/delta/Geeetech/G2Pro/Configuration.h @@ -1679,7 +1679,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1715,7 +1715,8 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { -19, -11, -2 } // G2 { 19, -11, -2 } +// G2 { 19, -11, -2 } +#define NOZZLE_TO_PROBE_OFFSET { -19, -11, -2 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/delta/Geeetech/G2S/Configuration.h b/config/examples/delta/Geeetech/G2S/Configuration.h index 21a8d238ca..ed882859ef 100644 --- a/config/examples/delta/Geeetech/G2S/Configuration.h +++ b/config/examples/delta/Geeetech/G2S/Configuration.h @@ -1679,7 +1679,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1715,7 +1715,8 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 19, -11, -2 } // G2 { 19, -11, -2 } +// G2 { 19, -11, -2 } +#define NOZZLE_TO_PROBE_OFFSET { 19, -11, -2 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/delta/Geeetech/G2SPro/Configuration.h b/config/examples/delta/Geeetech/G2SPro/Configuration.h index 00db69cbc1..18fbebf10e 100644 --- a/config/examples/delta/Geeetech/G2SPro/Configuration.h +++ b/config/examples/delta/Geeetech/G2SPro/Configuration.h @@ -1679,7 +1679,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1715,7 +1715,8 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 19, -11, -2 } // G2 { 19, -11, -2 } +// G2 { 19, -11, -2 } +#define NOZZLE_TO_PROBE_OFFSET { 19, -11, -2 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/delta/Geeetech/Rostock 301/Configuration.h b/config/examples/delta/Geeetech/Rostock 301/Configuration.h index 92c36e5c4b..4e663d04d3 100644 --- a/config/examples/delta/Geeetech/Rostock 301/Configuration.h +++ b/config/examples/delta/Geeetech/Rostock 301/Configuration.h @@ -1679,7 +1679,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1715,7 +1715,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 0, -10, -3.5 } +#define NOZZLE_TO_PROBE_OFFSET { 0, -10, -3.5 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/delta/Hatchbox_Alpha/Configuration.h b/config/examples/delta/Hatchbox_Alpha/Configuration.h index 076662428c..e0f9fdcb9e 100644 --- a/config/examples/delta/Hatchbox_Alpha/Configuration.h +++ b/config/examples/delta/Hatchbox_Alpha/Configuration.h @@ -1684,7 +1684,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1720,7 +1720,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 0, 0, 0 } +#define NOZZLE_TO_PROBE_OFFSET { 0, 0, 0 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/delta/MKS/SBASE/Configuration.h b/config/examples/delta/MKS/SBASE/Configuration.h index abe108ee6a..7679133c8c 100644 --- a/config/examples/delta/MKS/SBASE/Configuration.h +++ b/config/examples/delta/MKS/SBASE/Configuration.h @@ -1679,7 +1679,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1715,7 +1715,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 0, -10, -3.5 } +#define NOZZLE_TO_PROBE_OFFSET { 0, -10, -3.5 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/delta/Malyan M300/Configuration.h b/config/examples/delta/Malyan M300/Configuration.h index 816f4b5ea4..ed07172217 100644 --- a/config/examples/delta/Malyan M300/Configuration.h +++ b/config/examples/delta/Malyan M300/Configuration.h @@ -1672,7 +1672,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1708,7 +1708,8 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 0, 0, -0.3 } // Account for switches travel +// Account for switches travel +#define NOZZLE_TO_PROBE_OFFSET { 0, 0, -0.3 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/delta/Micromake-D1/MKS-Gen-L-V2.1/Configuration.h b/config/examples/delta/Micromake-D1/MKS-Gen-L-V2.1/Configuration.h index c0cf6733ac..a7f7fa94df 100644 --- a/config/examples/delta/Micromake-D1/MKS-Gen-L-V2.1/Configuration.h +++ b/config/examples/delta/Micromake-D1/MKS-Gen-L-V2.1/Configuration.h @@ -1688,7 +1688,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1724,7 +1724,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 0, 0, -22.57 } +#define NOZZLE_TO_PROBE_OFFSET { 0, 0, -22.57 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/delta/Micromake-D1/RAMPS-1.4/Configuration.h b/config/examples/delta/Micromake-D1/RAMPS-1.4/Configuration.h index 5450016d2a..15276da217 100644 --- a/config/examples/delta/Micromake-D1/RAMPS-1.4/Configuration.h +++ b/config/examples/delta/Micromake-D1/RAMPS-1.4/Configuration.h @@ -1691,7 +1691,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1727,7 +1727,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 0, 0, 0.2 } +#define NOZZLE_TO_PROBE_OFFSET { 0, 0, 0.2 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/delta/Tevo Little Monster/Configuration.h b/config/examples/delta/Tevo Little Monster/Configuration.h index d0d0d4db28..e447e1cd2c 100644 --- a/config/examples/delta/Tevo Little Monster/Configuration.h +++ b/config/examples/delta/Tevo Little Monster/Configuration.h @@ -1680,7 +1680,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1716,7 +1716,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 20, -10, -1.05 } +#define NOZZLE_TO_PROBE_OFFSET { 20, -10, -1.05 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/delta/Velleman/K8800/Configuration.h b/config/examples/delta/Velleman/K8800/Configuration.h index 594c6bf413..0011bdf53d 100644 --- a/config/examples/delta/Velleman/K8800/Configuration.h +++ b/config/examples/delta/Velleman/K8800/Configuration.h @@ -1706,7 +1706,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1742,7 +1742,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 0, 0, 0 } +#define NOZZLE_TO_PROBE_OFFSET { 0, 0, 0 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/delta/generic/Configuration.h b/config/examples/delta/generic/Configuration.h index 868080275b..adb3087e50 100644 --- a/config/examples/delta/generic/Configuration.h +++ b/config/examples/delta/generic/Configuration.h @@ -1679,7 +1679,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1715,7 +1715,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 0, -10, -3.5 } +#define NOZZLE_TO_PROBE_OFFSET { 0, -10, -3.5 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/delta/kossel_clear/Configuration.h b/config/examples/delta/kossel_clear/Configuration.h index 8a4601f881..02a42dbdb3 100644 --- a/config/examples/delta/kossel_clear/Configuration.h +++ b/config/examples/delta/kossel_clear/Configuration.h @@ -1679,7 +1679,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1716,7 +1716,7 @@ * O-- FRONT --+ */ // BL Touch with John Ecker Custom Mount -#define NOZZLE_TO_PROBE_OFFSET { 0, -29, -3.4 } +#define NOZZLE_TO_PROBE_OFFSET { 0, -29, -3.4 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/delta/kossel_mini/Configuration.h b/config/examples/delta/kossel_mini/Configuration.h index 5241d51f7a..ca39db418f 100644 --- a/config/examples/delta/kossel_mini/Configuration.h +++ b/config/examples/delta/kossel_mini/Configuration.h @@ -1681,7 +1681,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1717,7 +1717,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 0, -10, -3.5 } +#define NOZZLE_TO_PROBE_OFFSET { 0, -10, -3.5 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/delta/kossel_pro/Configuration.h b/config/examples/delta/kossel_pro/Configuration.h index d06b5d82f4..c3a130466e 100644 --- a/config/examples/delta/kossel_pro/Configuration.h +++ b/config/examples/delta/kossel_pro/Configuration.h @@ -1695,7 +1695,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1731,7 +1731,8 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { -23, -6, -17.25 } // KosselPro actual: -22.919, -6.304, -17.45 +// KosselPro actual: -22.919, -6.304, -17.45 +#define NOZZLE_TO_PROBE_OFFSET { -23, -6, -17.25 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point /** * Kossel Pro note: The correct value is likely -17.45 but I'd rather err on the side of * not giving someone a head crash. Use something like G29 Z-0.2 to adjust as needed. diff --git a/config/examples/delta/kossel_xl/Configuration.h b/config/examples/delta/kossel_xl/Configuration.h index 7529832b30..7a99c6ca8c 100644 --- a/config/examples/delta/kossel_xl/Configuration.h +++ b/config/examples/delta/kossel_xl/Configuration.h @@ -1685,7 +1685,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1721,7 +1721,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 0.0, 0.0, 0.3 } +#define NOZZLE_TO_PROBE_OFFSET { 0.0, 0.0, 0.3 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/gCreate/gMax1.5+/Configuration.h b/config/examples/gCreate/gMax1.5+/Configuration.h index a5aeebcebc..be9e7f184e 100644 --- a/config/examples/gCreate/gMax1.5+/Configuration.h +++ b/config/examples/gCreate/gMax1.5+/Configuration.h @@ -1678,7 +1678,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1714,7 +1714,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { -17, -10, -0.25 } +#define NOZZLE_TO_PROBE_OFFSET { -17, -10, -0.25 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/linear_axes/Octopus 8 LINEAR_AXES/Configuration.h b/config/examples/linear_axes/Octopus 8 LINEAR_AXES/Configuration.h index 5542fb8154..2453598e17 100644 --- a/config/examples/linear_axes/Octopus 8 LINEAR_AXES/Configuration.h +++ b/config/examples/linear_axes/Octopus 8 LINEAR_AXES/Configuration.h @@ -1683,7 +1683,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1719,7 +1719,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/linear_axes/RAMPS 5 LINEAR_AXES/Configuration.h b/config/examples/linear_axes/RAMPS 5 LINEAR_AXES/Configuration.h index 5a2d0a76d7..897f61970d 100644 --- a/config/examples/linear_axes/RAMPS 5 LINEAR_AXES/Configuration.h +++ b/config/examples/linear_axes/RAMPS 5 LINEAR_AXES/Configuration.h @@ -1658,7 +1658,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1694,7 +1694,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/makibox/Configuration.h b/config/examples/makibox/Configuration.h index 5bb08fe758..3c8c7606b3 100644 --- a/config/examples/makibox/Configuration.h +++ b/config/examples/makibox/Configuration.h @@ -1674,7 +1674,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1710,7 +1710,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { -25, -29, -12.35 } +#define NOZZLE_TO_PROBE_OFFSET { -25, -29, -12.35 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0 diff --git a/config/examples/tvrrug/Round2/Configuration.h b/config/examples/tvrrug/Round2/Configuration.h index 5d83d9d79b..10c7609dbd 100644 --- a/config/examples/tvrrug/Round2/Configuration.h +++ b/config/examples/tvrrug/Round2/Configuration.h @@ -1678,7 +1678,7 @@ * Nozzle-to-Probe offsets { X, Y, Z } * * X and Y offset - * Use a caliper or ruler to measure the distance from the tip of + * Use a caliper or ruler to measure the distance (in mm) from the tip of * the Nozzle to the center-point of the Probe in the X and Y axes. * * Z offset @@ -1714,7 +1714,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { -25, -29, -12.35 } +#define NOZZLE_TO_PROBE_OFFSET { -25, -29, -12.35 } // (mm) X, Y, Z distance from Nozzle tip to Probe trigger-point // Enable and set to use a specific tool for probing. Disable to allow any tool. #define PROBING_TOOL 0