3D-printing/Configurations
1
0
Fork 0
mirror of https://github.com/MarlinFirmware/Configurations.git synced 2025-07-24 07:04:02 -06:00
Code Issues Projects Releases Packages Wiki Activity Actions

🔧 Fix, Improve Biqu BX Config (#786)

Browse source
This commit is contained in:
Keith Bennett 2022-07-27 03:52:51 -07:00 • committed by GitHub
parent 17cbbaa357
commit 3046c5a370
No known key found for this signature in database
GPG key ID: 4AEE18F83AFDEB23
3 changed files with 43 additions and 39 deletions
Download patch file Download diff file Expand all files Collapse all files

36
config/examples/BIQU/BX/Configuration.h
View file

@ -23,10 +23,8 @@
#error "Don't build with import-2.1.x configurations!"
#error "Use the 'bugfix...' or 'release...' configurations matching your Marlin version."
/**
* Uncomment for the V3.0 board, otherwise V2.0 is assumed
*/
//#define MOTHERBOARD BOARD_BTT_SKR_SE_BX_V3
//#define MOTHERBOARD BOARD_BTT_SKR_SE_BX_V3 // Uncomment for the V3.0 board, otherwise V2.0 is assumed
//#define BX_ALL_METAL_HOTEND // Uncomment for newer H2 extruder with all metal heatbreak
/**
* Configuration.h
@ -134,7 +132,7 @@
* Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1
* :[-1, 0, 1, 2, 3, 4, 5, 6, 7]
*/
#define SERIAL_PORT_3 4 // WiFi
//#define SERIAL_PORT_3 4 // WiFi
//#define BAUDRATE_3 250000 // Enable to override BAUDRATE
// Enable the Bluetooth serial interface on AT90USB devices
@ -604,7 +602,11 @@
// Above this temperature the heater will be switched off.
// This can protect components from overheating, but NOT from shorts and failures.
// (Use MINTEMP for thermistor short/failure protection.)
#define HEATER_0_MAXTEMP 265 // 250 + 15
#if ENABLED(BX_ALL_METAL_HOTEND)
#define HEATER_0_MAXTEMP 285 // 270 + 15
#else
#define HEATER_0_MAXTEMP 265 // 250 + 15
#endif
#define HEATER_1_MAXTEMP 275
#define HEATER_2_MAXTEMP 275
#define HEATER_3_MAXTEMP 275
@ -664,20 +666,20 @@
* for PID_EXTRUSION_SCALING and PID_FAN_SCALING. Use M306 to autotune the model.
*/
#if ENABLED(MPCTEMP)
//#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash)
//#define MPC_AUTOTUNE_MENU // Add MPC auto-tuning to the "Advanced Settings" menu. (~350 bytes of flash)
#define MPC_EDIT_MENU // Add MPC editing to the "Advanced Settings" menu. (~1300 bytes of flash)
#define MPC_AUTOTUNE_MENU // Add MPC auto-tuning to the "Advanced Settings" menu. (~350 bytes of flash)
#define MPC_MAX BANG_MAX // (0..255) Current to nozzle while MPC is active.
#define MPC_HEATER_POWER { 40.0f } // (W) Heat cartridge powers.
#define MPC_HEATER_POWER { 50.0f } // (W) Heat cartridge powers.
#define MPC_INCLUDE_FAN // Model the fan speed?
// Measured physical constants from M306
#define MPC_BLOCK_HEAT_CAPACITY { 16.7f } // (J/K) Heat block heat capacities.
#define MPC_SENSOR_RESPONSIVENESS { 0.22f } // (K/s per ∆K) Rate of change of sensor temperature from heat block.
#define MPC_AMBIENT_XFER_COEFF { 0.068f } // (W/K) Heat transfer coefficients from heat block to room air with fan off.
#define MPC_BLOCK_HEAT_CAPACITY { 11.99f } // (J/K) Heat block heat capacities.
#define MPC_SENSOR_RESPONSIVENESS { 0.1224f } // (K/s per ∆K) Rate of change of sensor temperature from heat block.
#define MPC_AMBIENT_XFER_COEFF { 0.0519f } // (W/K) Heat transfer coefficients from heat block to room air with fan off.
#if ENABLED(MPC_INCLUDE_FAN)
#define MPC_AMBIENT_XFER_COEFF_FAN255 { 0.097f } // (W/K) Heat transfer coefficients from heat block to room air with fan on full.
#define MPC_AMBIENT_XFER_COEFF_FAN255 { 0.0634f } // (W/K) Heat transfer coefficients from heat block to room air with fan on full.
#endif
// For one fan and multiple hotends MPC needs to know how to apply the fan cooling effect.
@ -1467,7 +1469,7 @@
// Most probes should stay away from the edges of the bed, but
// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
#define PROBING_MARGIN 30
#define PROBING_MARGIN 10
// X and Y axis travel speed (mm/min) between probes
#define XY_PROBE_FEEDRATE (200*60)
@ -1679,10 +1681,10 @@
// Travel limits (linear=mm, rotational=°) after homing, corresponding to endstop positions.
#define X_MIN_POS -13
#define Y_MIN_POS -7
#define Y_MIN_POS -4
#define Z_MIN_POS 0
#define X_MAX_POS X_BED_SIZE
#define Y_MAX_POS Y_BED_SIZE
#define Y_MAX_POS Y_BED_SIZE + 7
#define Z_MAX_POS 250
//#define I_MIN_POS 0
//#define I_MAX_POS 50
@ -3250,7 +3252,7 @@
//#define NEOPIXEL_PIN 4 // LED driving pin
#define NEOPIXEL2_TYPE NEOPIXEL_TYPE
//#define NEOPIXEL2_PIN 5
#define NEOPIXEL_PIXELS 15 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.)
#define NEOPIXEL_PIXELS 9 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.)
#define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once.
#define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255)
//#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup