Combined PTC point settings

config/default/Configuration_adv.h

@@ -1605,13 +1605,10 @@
     #define PTC_MAX_BED_TEMP BED_MAXTEMP
 
     // Park position to wait for probe cooldown
-    #define PTC_PARK_POS_X 0.0F
-    #define PTC_PARK_POS_Y 0.0F
-    #define PTC_PARK_POS_Z 100.0F
+    #define PTC_PARK_POS   { 0, 0, 100 }
 
     // Probe position to probe and wait for probe to reach target temperature
-    #define PTC_PROBE_POS_X  90.0F
-    #define PTC_PROBE_POS_Y 100.0F
+    #define PTC_PROBE_POS  { 90, 100 }
 
     // Enable additional compensation using hotend temperature
     // Note: this values cannot be calibrated automatically but have to be set manually

config/examples/3DFabXYZ/Migbot/Configuration_adv.h

@@ -1602,13 +1602,10 @@
     #define PTC_MAX_BED_TEMP BED_MAXTEMP
 
     // Park position to wait for probe cooldown
-    #define PTC_PARK_POS_X 0.0F
-    #define PTC_PARK_POS_Y 0.0F
-    #define PTC_PARK_POS_Z 100.0F
+    #define PTC_PARK_POS   { 0, 0, 100 }
 
     // Probe position to probe and wait for probe to reach target temperature
-    #define PTC_PROBE_POS_X  90.0F
-    #define PTC_PROBE_POS_Y 100.0F
+    #define PTC_PROBE_POS  { 90, 100 }
 
     // Enable additional compensation using hotend temperature
     // Note: this values cannot be calibrated automatically but have to be set manually

config/examples/ADIMLab/Gantry v1/Configuration_adv.h

@@ -1602,13 +1602,10 @@
     #define PTC_MAX_BED_TEMP BED_MAXTEMP
 
     // Park position to wait for probe cooldown
-    #define PTC_PARK_POS_X 0.0F
-    #define PTC_PARK_POS_Y 0.0F
-    #define PTC_PARK_POS_Z 100.0F
+    #define PTC_PARK_POS   { 0, 0, 100 }
 
     // Probe position to probe and wait for probe to reach target temperature
-    #define PTC_PROBE_POS_X  90.0F
-    #define PTC_PROBE_POS_Y 100.0F
+    #define PTC_PROBE_POS  { 90, 100 }
 
     // Enable additional compensation using hotend temperature
     // Note: this values cannot be calibrated automatically but have to be set manually

config/examples/ADIMLab/Gantry v2/Configuration_adv.h

@@ -1602,13 +1602,10 @@
     #define PTC_MAX_BED_TEMP BED_MAXTEMP
 
     // Park position to wait for probe cooldown
-    #define PTC_PARK_POS_X 0.0F
-    #define PTC_PARK_POS_Y 0.0F
-    #define PTC_PARK_POS_Z 100.0F
+    #define PTC_PARK_POS   { 0, 0, 100 }
 
     // Probe position to probe and wait for probe to reach target temperature
-    #define PTC_PROBE_POS_X  90.0F
-    #define PTC_PROBE_POS_Y 100.0F
+    #define PTC_PROBE_POS  { 90, 100 }
 
     // Enable additional compensation using hotend temperature
     // Note: this values cannot be calibrated automatically but have to be set manually

config/examples/AlephObjects/TAZ4/Configuration_adv.h

@@ -1602,13 +1602,10 @@
     #define PTC_MAX_BED_TEMP BED_MAXTEMP
 
     // Park position to wait for probe cooldown
-    #define PTC_PARK_POS_X 0.0F
-    #define PTC_PARK_POS_Y 0.0F
-    #define PTC_PARK_POS_Z 100.0F
+    #define PTC_PARK_POS   { 0, 0, 100 }
 
     // Probe position to probe and wait for probe to reach target temperature
-    #define PTC_PROBE_POS_X  90.0F
-    #define PTC_PROBE_POS_Y 100.0F
+    #define PTC_PROBE_POS  { 90, 100 }
 
     // Enable additional compensation using hotend temperature
     // Note: this values cannot be calibrated automatically but have to be set manually

config/examples/Alfawise/U20-bltouch/Configuration_adv.h

@@ -1604,13 +1604,10 @@
     #define PTC_MAX_BED_TEMP BED_MAXTEMP
 
     // Park position to wait for probe cooldown
-    #define PTC_PARK_POS_X 0.0F
-    #define PTC_PARK_POS_Y 0.0F
-    #define PTC_PARK_POS_Z 100.0F
+    #define PTC_PARK_POS   { 0, 0, 100 }
 
     // Probe position to probe and wait for probe to reach target temperature
-    #define PTC_PROBE_POS_X  90.0F
-    #define PTC_PROBE_POS_Y 100.0F
+    #define PTC_PROBE_POS  { 90, 100 }
 
     // Enable additional compensation using hotend temperature
     // Note: this values cannot be calibrated automatically but have to be set manually

config/examples/Alfawise/U20/Configuration_adv.h

@@ -1603,13 +1603,10 @@
     #define PTC_MAX_BED_TEMP BED_MAXTEMP
 
     // Park position to wait for probe cooldown
-    #define PTC_PARK_POS_X 0.0F
-    #define PTC_PARK_POS_Y 0.0F
-    #define PTC_PARK_POS_Z 100.0F
+    #define PTC_PARK_POS   { 0, 0, 100 }
 
     // Probe position to probe and wait for probe to reach target temperature
-    #define PTC_PROBE_POS_X  90.0F
-    #define PTC_PROBE_POS_Y 100.0F
+    #define PTC_PROBE_POS  { 90, 100 }
 
     // Enable additional compensation using hotend temperature
     // Note: this values cannot be calibrated automatically but have to be set manually

config/examples/AliExpress/UM2pExt/Configuration_adv.h

@@ -1602,13 +1602,10 @@
     #define PTC_MAX_BED_TEMP BED_MAXTEMP
 
     // Park position to wait for probe cooldown
-    #define PTC_PARK_POS_X 0.0F
-    #define PTC_PARK_POS_Y 0.0F
-    #define PTC_PARK_POS_Z 100.0F
+    #define PTC_PARK_POS   { 0, 0, 100 }
 
     // Probe position to probe and wait for probe to reach target temperature
-    #define PTC_PROBE_POS_X  90.0F
-    #define PTC_PROBE_POS_Y 100.0F
+    #define PTC_PROBE_POS  { 90, 100 }
 
     // Enable additional compensation using hotend temperature
     // Note: this values cannot be calibrated automatically but have to be set manually

config/examples/Anet/A2/Configuration_adv.h

@@ -1602,13 +1602,10 @@
     #define PTC_MAX_BED_TEMP BED_MAXTEMP
 
     // Park position to wait for probe cooldown
-    #define PTC_PARK_POS_X 0.0F
-    #define PTC_PARK_POS_Y 0.0F
-    #define PTC_PARK_POS_Z 100.0F
+    #define PTC_PARK_POS   { 0, 0, 100 }
 
     // Probe position to probe and wait for probe to reach target temperature
-    #define PTC_PROBE_POS_X  90.0F
-    #define PTC_PROBE_POS_Y 100.0F
+    #define PTC_PROBE_POS  { 90, 100 }
 
     // Enable additional compensation using hotend temperature
     // Note: this values cannot be calibrated automatically but have to be set manually

config/examples/Anet/A2plus/Configuration_adv.h

@@ -1602,13 +1602,10 @@
     #define PTC_MAX_BED_TEMP BED_MAXTEMP
 
     // Park position to wait for probe cooldown
-    #define PTC_PARK_POS_X 0.0F
-    #define PTC_PARK_POS_Y 0.0F
-    #define PTC_PARK_POS_Z 100.0F
+    #define PTC_PARK_POS   { 0, 0, 100 }
 
     // Probe position to probe and wait for probe to reach target temperature
-    #define PTC_PROBE_POS_X  90.0F
-    #define PTC_PROBE_POS_Y 100.0F
+    #define PTC_PROBE_POS  { 90, 100 }
 
     // Enable additional compensation using hotend temperature
     // Note: this values cannot be calibrated automatically but have to be set manually

config/examples/Anet/A6/Configuration_adv.h

@@ -1602,13 +1602,10 @@
     #define PTC_MAX_BED_TEMP BED_MAXTEMP
 
     // Park position to wait for probe cooldown
-    #define PTC_PARK_POS_X 0.0F
-    #define PTC_PARK_POS_Y 0.0F
-    #define PTC_PARK_POS_Z 100.0F
+    #define PTC_PARK_POS   { 0, 0, 100 }
 
     // Probe position to probe and wait for probe to reach target temperature
-    #define PTC_PROBE_POS_X  90.0F
-    #define PTC_PROBE_POS_Y 100.0F
+    #define PTC_PROBE_POS  { 90, 100 }
 
     // Enable additional compensation using hotend temperature
     // Note: this values cannot be calibrated automatically but have to be set manually

config/examples/Anet/A8/Configuration_adv.h

@@ -1602,13 +1602,10 @@
     #define PTC_MAX_BED_TEMP BED_MAXTEMP
 
     // Park position to wait for probe cooldown
-    #define PTC_PARK_POS_X 0.0F
-    #define PTC_PARK_POS_Y 0.0F
-    #define PTC_PARK_POS_Z 100.0F
+    #define PTC_PARK_POS   { 0, 0, 100 }
 
     // Probe position to probe and wait for probe to reach target temperature
-    #define PTC_PROBE_POS_X  90.0F
-    #define PTC_PROBE_POS_Y 100.0F
+    #define PTC_PROBE_POS  { 90, 100 }
 
     // Enable additional compensation using hotend temperature
     // Note: this values cannot be calibrated automatically but have to be set manually

config/examples/Anet/A8plus/Configuration_adv.h

@@ -1602,13 +1602,10 @@
     #define PTC_MAX_BED_TEMP BED_MAXTEMP
 
     // Park position to wait for probe cooldown
-    #define PTC_PARK_POS_X 0.0F
-    #define PTC_PARK_POS_Y 0.0F
-    #define PTC_PARK_POS_Z 100.0F
+    #define PTC_PARK_POS   { 0, 0, 100 }
 
     // Probe position to probe and wait for probe to reach target temperature
-    #define PTC_PROBE_POS_X  90.0F
-    #define PTC_PROBE_POS_Y 100.0F
+    #define PTC_PROBE_POS  { 90, 100 }
 
     // Enable additional compensation using hotend temperature
     // Note: this values cannot be calibrated automatically but have to be set manually

config/examples/Anet/E10/Configuration_adv.h

@@ -1602,13 +1602,10 @@
     #define PTC_MAX_BED_TEMP BED_MAXTEMP
 
     // Park position to wait for probe cooldown
-    #define PTC_PARK_POS_X 0.0F
-    #define PTC_PARK_POS_Y 0.0F
-    #define PTC_PARK_POS_Z 100.0F
+    #define PTC_PARK_POS   { 0, 0, 100 }
 
     // Probe position to probe and wait for probe to reach target temperature
-    #define PTC_PROBE_POS_X  90.0F
-    #define PTC_PROBE_POS_Y 100.0F
+    #define PTC_PROBE_POS  { 90, 100 }
 
     // Enable additional compensation using hotend temperature
     // Note: this values cannot be calibrated automatically but have to be set manually

config/examples/Anet/E16/Configuration_adv.h

@@ -1602,13 +1602,10 @@
     #define PTC_MAX_BED_TEMP BED_MAXTEMP
 
     // Park position to wait for probe cooldown
-    #define PTC_PARK_POS_X 0.0F
-    #define PTC_PARK_POS_Y 0.0F
-    #define PTC_PARK_POS_Z 100.0F
+    #define PTC_PARK_POS   { 0, 0, 100 }
 
     // Probe position to probe and wait for probe to reach target temperature
-    #define PTC_PROBE_POS_X  90.0F
-    #define PTC_PROBE_POS_Y 100.0F
+    #define PTC_PROBE_POS  { 90, 100 }
 
     // Enable additional compensation using hotend temperature
     // Note: this values cannot be calibrated automatically but have to be set manually

config/examples/AnyCubic/i3/Configuration_adv.h

@@ -1602,13 +1602,10 @@
     #define PTC_MAX_BED_TEMP BED_MAXTEMP
 
     // Park position to wait for probe cooldown
-    #define PTC_PARK_POS_X 0.0F
-    #define PTC_PARK_POS_Y 0.0F
-    #define PTC_PARK_POS_Z 100.0F
+    #define PTC_PARK_POS   { 0, 0, 100 }
 
     // Probe position to probe and wait for probe to reach target temperature
-    #define PTC_PROBE_POS_X  90.0F
-    #define PTC_PROBE_POS_Y 100.0F
+    #define PTC_PROBE_POS  { 90, 100 }
 
     // Enable additional compensation using hotend temperature
     // Note: this values cannot be calibrated automatically but have to be set manually

config/examples/ArmEd/Configuration_adv.h

@@ -1606,13 +1606,10 @@
     #define PTC_MAX_BED_TEMP BED_MAXTEMP
 
     // Park position to wait for probe cooldown
-    #define PTC_PARK_POS_X 0.0F
-    #define PTC_PARK_POS_Y 0.0F
-    #define PTC_PARK_POS_Z 100.0F
+    #define PTC_PARK_POS   { 0, 0, 100 }
 
     // Probe position to probe and wait for probe to reach target temperature
-    #define PTC_PROBE_POS_X  90.0F
-    #define PTC_PROBE_POS_Y 100.0F
+    #define PTC_PROBE_POS  { 90, 100 }
 
     // Enable additional compensation using hotend temperature
     // Note: this values cannot be calibrated automatically but have to be set manually

config/examples/Artillery/Genius/Configuration_adv.h

@@ -1602,13 +1602,10 @@
     #define PTC_MAX_BED_TEMP BED_MAXTEMP
 
     // Park position to wait for probe cooldown
-    #define PTC_PARK_POS_X 0.0F
-    #define PTC_PARK_POS_Y 0.0F
-    #define PTC_PARK_POS_Z 100.0F
+    #define PTC_PARK_POS   { 0, 0, 100 }
 
     // Probe position to probe and wait for probe to reach target temperature
-    #define PTC_PROBE_POS_X  90.0F
-    #define PTC_PROBE_POS_Y 100.0F
+    #define PTC_PROBE_POS  { 90, 100 }
 
     // Enable additional compensation using hotend temperature
     // Note: this values cannot be calibrated automatically but have to be set manually

config/examples/Artillery/Sidewinder X1/Configuration_adv.h

@@ -1602,13 +1602,10 @@
     #define PTC_MAX_BED_TEMP BED_MAXTEMP
 
     // Park position to wait for probe cooldown
-    #define PTC_PARK_POS_X 0.0F
-    #define PTC_PARK_POS_Y 0.0F
-    #define PTC_PARK_POS_Z 100.0F
+    #define PTC_PARK_POS   { 0, 0, 100 }
 
     // Probe position to probe and wait for probe to reach target temperature
-    #define PTC_PROBE_POS_X  90.0F
-    #define PTC_PROBE_POS_Y 100.0F
+    #define PTC_PROBE_POS  { 90, 100 }
 
     // Enable additional compensation using hotend temperature
     // Note: this values cannot be calibrated automatically but have to be set manually

config/examples/BIBO/TouchX/cyclops/Configuration_adv.h

@@ -1602,13 +1602,10 @@
     #define PTC_MAX_BED_TEMP BED_MAXTEMP
 
     // Park position to wait for probe cooldown
-    #define PTC_PARK_POS_X 0.0F
-    #define PTC_PARK_POS_Y 0.0F
-    #define PTC_PARK_POS_Z 100.0F
+    #define PTC_PARK_POS   { 0, 0, 100 }
 
     // Probe position to probe and wait for probe to reach target temperature
-    #define PTC_PROBE_POS_X  90.0F
-    #define PTC_PROBE_POS_Y 100.0F
+    #define PTC_PROBE_POS  { 90, 100 }
 
     // Enable additional compensation using hotend temperature
     // Note: this values cannot be calibrated automatically but have to be set manually

config/examples/BIBO/TouchX/default/Configuration_adv.h

@@ -1602,13 +1602,10 @@
     #define PTC_MAX_BED_TEMP BED_MAXTEMP
 
     // Park position to wait for probe cooldown
-    #define PTC_PARK_POS_X 0.0F
-    #define PTC_PARK_POS_Y 0.0F
-    #define PTC_PARK_POS_Z 100.0F
+    #define PTC_PARK_POS   { 0, 0, 100 }
 
     // Probe position to probe and wait for probe to reach target temperature
-    #define PTC_PROBE_POS_X  90.0F
-    #define PTC_PROBE_POS_Y 100.0F
+    #define PTC_PROBE_POS  { 90, 100 }
 
     // Enable additional compensation using hotend temperature
     // Note: this values cannot be calibrated automatically but have to be set manually

config/examples/BQ/Hephestos/Configuration_adv.h

@@ -1602,13 +1602,10 @@
     #define PTC_MAX_BED_TEMP BED_MAXTEMP
 
     // Park position to wait for probe cooldown
-    #define PTC_PARK_POS_X 0.0F
-    #define PTC_PARK_POS_Y 0.0F
-    #define PTC_PARK_POS_Z 100.0F
+    #define PTC_PARK_POS   { 0, 0, 100 }
 
     // Probe position to probe and wait for probe to reach target temperature
-    #define PTC_PROBE_POS_X  90.0F
-    #define PTC_PROBE_POS_Y 100.0F
+    #define PTC_PROBE_POS  { 90, 100 }
 
     // Enable additional compensation using hotend temperature
     // Note: this values cannot be calibrated automatically but have to be set manually

config/examples/BQ/Hephestos_2/Configuration_adv.h

@@ -1610,13 +1610,10 @@
     #define PTC_MAX_BED_TEMP BED_MAXTEMP
 
     // Park position to wait for probe cooldown
-    #define PTC_PARK_POS_X 0.0F
-    #define PTC_PARK_POS_Y 0.0F
-    #define PTC_PARK_POS_Z 100.0F
+    #define PTC_PARK_POS   { 0, 0, 100 }
 
     // Probe position to probe and wait for probe to reach target temperature
-    #define PTC_PROBE_POS_X  90.0F
-    #define PTC_PROBE_POS_Y 100.0F
+    #define PTC_PROBE_POS  { 90, 100 }
 
     // Enable additional compensation using hotend temperature
     // Note: this values cannot be calibrated automatically but have to be set manually

config/examples/BQ/WITBOX/Configuration_adv.h

@@ -1602,13 +1602,10 @@
     #define PTC_MAX_BED_TEMP BED_MAXTEMP
 
     // Park position to wait for probe cooldown
-    #define PTC_PARK_POS_X 0.0F
-    #define PTC_PARK_POS_Y 0.0F
-    #define PTC_PARK_POS_Z 100.0F
+    #define PTC_PARK_POS   { 0, 0, 100 }
 
     // Probe position to probe and wait for probe to reach target temperature
-    #define PTC_PROBE_POS_X  90.0F
-    #define PTC_PROBE_POS_Y 100.0F
+    #define PTC_PROBE_POS  { 90, 100 }
 
     // Enable additional compensation using hotend temperature
     // Note: this values cannot be calibrated automatically but have to be set manually

config/examples/BigTreeTech/BTT002 - Prusa MK3S - TMC2209/Configuration_adv.h

@@ -1601,13 +1601,10 @@
     #define PTC_MAX_BED_TEMP BED_MAXTEMP
 
     // Park position to wait for probe cooldown
-    #define PTC_PARK_POS_X 245.0F // ((X_MAX_POS) - 10)
-    #define PTC_PARK_POS_Y   6.0F // ((Y_MIN_POS) + 10)
-    #define PTC_PARK_POS_Z 105.0F // ((Z_MAX_POS) / 2)
+    #define PTC_PARK_POS   { 245, 6, 105 }  // right-front
 
     // Probe position to probe and wait for probe to reach target temperature
-    #define PTC_PROBE_POS_X 127.5F // ((X_BED_SIZE) / 2)
-    #define PTC_PROBE_POS_Y 106.3F // ((Y_BED_SIZE) / 2)
+    #define PTC_PROBE_POS  { 127.5, 106.3 } // middle
 
     // Enable additional compensation using hotend temperature
     // Note: this values cannot be calibrated automatically but have to be set manually

config/examples/BigTreeTech/SKR Mini E3 1.0/Configuration_adv.h

@@ -1604,13 +1604,10 @@
     #define PTC_MAX_BED_TEMP BED_MAXTEMP
 
     // Park position to wait for probe cooldown
-    #define PTC_PARK_POS_X 0.0F
-    #define PTC_PARK_POS_Y 0.0F
-    #define PTC_PARK_POS_Z 100.0F
+    #define PTC_PARK_POS   { 0, 0, 100 }
 
     // Probe position to probe and wait for probe to reach target temperature
-    #define PTC_PROBE_POS_X  90.0F
-    #define PTC_PROBE_POS_Y 100.0F
+    #define PTC_PROBE_POS  { 90, 100 }
 
     // Enable additional compensation using hotend temperature
     // Note: this values cannot be calibrated automatically but have to be set manually

config/examples/BigTreeTech/SKR Mini E3 1.2/Configuration_adv.h

@@ -1604,13 +1604,10 @@
     #define PTC_MAX_BED_TEMP BED_MAXTEMP
 
     // Park position to wait for probe cooldown
-    #define PTC_PARK_POS_X 0.0F
-    #define PTC_PARK_POS_Y 0.0F
-    #define PTC_PARK_POS_Z 100.0F
+    #define PTC_PARK_POS   { 0, 0, 100 }
 
     // Probe position to probe and wait for probe to reach target temperature
-    #define PTC_PROBE_POS_X  90.0F
-    #define PTC_PROBE_POS_Y 100.0F
+    #define PTC_PROBE_POS  { 90, 100 }
 
     // Enable additional compensation using hotend temperature
     // Note: this values cannot be calibrated automatically but have to be set manually

config/examples/Cartesio/Configuration_adv.h

@@ -1602,13 +1602,10 @@
     #define PTC_MAX_BED_TEMP BED_MAXTEMP
 
     // Park position to wait for probe cooldown
-    #define PTC_PARK_POS_X 0.0F
-    #define PTC_PARK_POS_Y 0.0F
-    #define PTC_PARK_POS_Z 100.0F
+    #define PTC_PARK_POS   { 0, 0, 100 }
 
     // Probe position to probe and wait for probe to reach target temperature
-    #define PTC_PROBE_POS_X  90.0F
-    #define PTC_PROBE_POS_Y 100.0F
+    #define PTC_PROBE_POS  { 90, 100 }
 
     // Enable additional compensation using hotend temperature
     // Note: this values cannot be calibrated automatically but have to be set manually

config/examples/Copymaster3D/300/Configuration_adv.h

@@ -1605,13 +1605,10 @@
     #define PTC_MAX_BED_TEMP BED_MAXTEMP
 
     // Park position to wait for probe cooldown
-    #define PTC_PARK_POS_X 0.0F
-    #define PTC_PARK_POS_Y 0.0F
-    #define PTC_PARK_POS_Z 100.0F
+    #define PTC_PARK_POS   { 0, 0, 100 }
 
     // Probe position to probe and wait for probe to reach target temperature
-    #define PTC_PROBE_POS_X  90.0F
-    #define PTC_PROBE_POS_Y 100.0F
+    #define PTC_PROBE_POS  { 90, 100 }
 
     // Enable additional compensation using hotend temperature
     // Note: this values cannot be calibrated automatically but have to be set manually

config/examples/Copymaster3D/400/Configuration_adv.h

@@ -1605,13 +1605,10 @@
     #define PTC_MAX_BED_TEMP BED_MAXTEMP
 
     // Park position to wait for probe cooldown
-    #define PTC_PARK_POS_X 0.0F
-    #define PTC_PARK_POS_Y 0.0F
-    #define PTC_PARK_POS_Z 100.0F
+    #define PTC_PARK_POS   { 0, 0, 100 }
 
     // Probe position to probe and wait for probe to reach target temperature
-    #define PTC_PROBE_POS_X  90.0F
-    #define PTC_PROBE_POS_Y 100.0F
+    #define PTC_PROBE_POS  { 90, 100 }
 
     // Enable additional compensation using hotend temperature
     // Note: this values cannot be calibrated automatically but have to be set manually

config/examples/Copymaster3D/500/Configuration_adv.h

@@ -1605,13 +1605,10 @@
     #define PTC_MAX_BED_TEMP BED_MAXTEMP
 
     // Park position to wait for probe cooldown
-    #define PTC_PARK_POS_X 0.0F
-    #define PTC_PARK_POS_Y 0.0F
-    #define PTC_PARK_POS_Z 100.0F
+    #define PTC_PARK_POS   { 0, 0, 100 }
 
     // Probe position to probe and wait for probe to reach target temperature
-    #define PTC_PROBE_POS_X  90.0F
-    #define PTC_PROBE_POS_Y 100.0F
+    #define PTC_PROBE_POS  { 90, 100 }
 
     // Enable additional compensation using hotend temperature
     // Note: this values cannot be calibrated automatically but have to be set manually

config/examples/Creality/CR-10/Configuration_adv.h

@@ -1602,13 +1602,10 @@
     #define PTC_MAX_BED_TEMP BED_MAXTEMP
 
     // Park position to wait for probe cooldown
-    #define PTC_PARK_POS_X 0.0F
-    #define PTC_PARK_POS_Y 0.0F
-    #define PTC_PARK_POS_Z 100.0F
+    #define PTC_PARK_POS   { 0, 0, 100 }
 
     // Probe position to probe and wait for probe to reach target temperature
-    #define PTC_PROBE_POS_X  90.0F
-    #define PTC_PROBE_POS_Y 100.0F
+    #define PTC_PROBE_POS  { 90, 100 }
 
     // Enable additional compensation using hotend temperature
     // Note: this values cannot be calibrated automatically but have to be set manually

config/examples/Creality/CR-10S/Configuration_adv.h

@@ -1602,13 +1602,10 @@
     #define PTC_MAX_BED_TEMP BED_MAXTEMP
 
     // Park position to wait for probe cooldown
-    #define PTC_PARK_POS_X 0.0F
-    #define PTC_PARK_POS_Y 0.0F
-    #define PTC_PARK_POS_Z 100.0F
+    #define PTC_PARK_POS   { 0, 0, 100 }
 
     // Probe position to probe and wait for probe to reach target temperature
-    #define PTC_PROBE_POS_X  90.0F
-    #define PTC_PROBE_POS_Y 100.0F
+    #define PTC_PROBE_POS  { 90, 100 }
 
     // Enable additional compensation using hotend temperature
     // Note: this values cannot be calibrated automatically but have to be set manually

config/examples/Creality/CR-10_5S/Configuration_adv.h

@@ -1602,13 +1602,10 @@
     #define PTC_MAX_BED_TEMP BED_MAXTEMP
 
     // Park position to wait for probe cooldown
-    #define PTC_PARK_POS_X 0.0F
-    #define PTC_PARK_POS_Y 0.0F
-    #define PTC_PARK_POS_Z 100.0F
+    #define PTC_PARK_POS   { 0, 0, 100 }
 
     // Probe position to probe and wait for probe to reach target temperature
-    #define PTC_PROBE_POS_X  90.0F
-    #define PTC_PROBE_POS_Y 100.0F
+    #define PTC_PROBE_POS  { 90, 100 }
 
     // Enable additional compensation using hotend temperature
     // Note: this values cannot be calibrated automatically but have to be set manually

config/examples/Creality/CR-10mini/Configuration_adv.h

@@ -1602,13 +1602,10 @@
     #define PTC_MAX_BED_TEMP BED_MAXTEMP
 
     // Park position to wait for probe cooldown
-    #define PTC_PARK_POS_X 0.0F
-    #define PTC_PARK_POS_Y 0.0F
-    #define PTC_PARK_POS_Z 100.0F
+    #define PTC_PARK_POS   { 0, 0, 100 }
 
     // Probe position to probe and wait for probe to reach target temperature
-    #define PTC_PROBE_POS_X  90.0F
-    #define PTC_PROBE_POS_Y 100.0F
+    #define PTC_PROBE_POS  { 90, 100 }
 
     // Enable additional compensation using hotend temperature
     // Note: this values cannot be calibrated automatically but have to be set manually

config/examples/Creality/CR-20 Pro/Configuration_adv.h

@@ -1602,13 +1602,10 @@
     #define PTC_MAX_BED_TEMP BED_MAXTEMP
 
     // Park position to wait for probe cooldown
-    #define PTC_PARK_POS_X 0.0F
-    #define PTC_PARK_POS_Y 0.0F
-    #define PTC_PARK_POS_Z 100.0F
+    #define PTC_PARK_POS   { 0, 0, 100 }
 
     // Probe position to probe and wait for probe to reach target temperature
-    #define PTC_PROBE_POS_X  90.0F
-    #define PTC_PROBE_POS_Y 100.0F
+    #define PTC_PROBE_POS  { 90, 100 }
 
     // Enable additional compensation using hotend temperature
     // Note: this values cannot be calibrated automatically but have to be set manually

config/examples/Creality/CR-20/Configuration_adv.h

@@ -1602,13 +1602,10 @@
     #define PTC_MAX_BED_TEMP BED_MAXTEMP
 
     // Park position to wait for probe cooldown
-    #define PTC_PARK_POS_X 0.0F
-    #define PTC_PARK_POS_Y 0.0F
-    #define PTC_PARK_POS_Z 100.0F
+    #define PTC_PARK_POS   { 0, 0, 100 }
 
     // Probe position to probe and wait for probe to reach target temperature
-    #define PTC_PROBE_POS_X  90.0F
-    #define PTC_PROBE_POS_Y 100.0F
+    #define PTC_PROBE_POS  { 90, 100 }
 
     // Enable additional compensation using hotend temperature
     // Note: this values cannot be calibrated automatically but have to be set manually

config/examples/Creality/CR-8/Configuration_adv.h

@@ -1602,13 +1602,10 @@
     #define PTC_MAX_BED_TEMP BED_MAXTEMP
 
     // Park position to wait for probe cooldown
-    #define PTC_PARK_POS_X 0.0F
-    #define PTC_PARK_POS_Y 0.0F
-    #define PTC_PARK_POS_Z 100.0F
+    #define PTC_PARK_POS   { 0, 0, 100 }
 
     // Probe position to probe and wait for probe to reach target temperature
-    #define PTC_PROBE_POS_X  90.0F
-    #define PTC_PROBE_POS_Y 100.0F
+    #define PTC_PROBE_POS  { 90, 100 }
 
     // Enable additional compensation using hotend temperature
     // Note: this values cannot be calibrated automatically but have to be set manually

config/examples/Creality/Ender-2/Configuration_adv.h

@@ -1602,13 +1602,10 @@
     #define PTC_MAX_BED_TEMP BED_MAXTEMP
 
     // Park position to wait for probe cooldown
-    #define PTC_PARK_POS_X 0.0F
-    #define PTC_PARK_POS_Y 0.0F
-    #define PTC_PARK_POS_Z 100.0F
+    #define PTC_PARK_POS   { 0, 0, 100 }
 
     // Probe position to probe and wait for probe to reach target temperature
-    #define PTC_PROBE_POS_X  90.0F
-    #define PTC_PROBE_POS_Y 100.0F
+    #define PTC_PROBE_POS  { 90, 100 }
 
     // Enable additional compensation using hotend temperature
     // Note: this values cannot be calibrated automatically but have to be set manually

config/examples/Creality/Ender-3/Configuration_adv.h

@@ -1602,13 +1602,10 @@
     #define PTC_MAX_BED_TEMP BED_MAXTEMP
 
     // Park position to wait for probe cooldown
-    #define PTC_PARK_POS_X 0.0F
-    #define PTC_PARK_POS_Y 0.0F
-    #define PTC_PARK_POS_Z 100.0F
+    #define PTC_PARK_POS   { 0, 0, 100 }
 
     // Probe position to probe and wait for probe to reach target temperature
-    #define PTC_PROBE_POS_X  90.0F
-    #define PTC_PROBE_POS_Y 100.0F
+    #define PTC_PROBE_POS  { 90, 100 }
 
     // Enable additional compensation using hotend temperature
     // Note: this values cannot be calibrated automatically but have to be set manually

config/examples/Creality/Ender-4/Configuration_adv.h

@@ -1602,13 +1602,10 @@
     #define PTC_MAX_BED_TEMP BED_MAXTEMP
 
     // Park position to wait for probe cooldown
-    #define PTC_PARK_POS_X 0.0F
-    #define PTC_PARK_POS_Y 0.0F
-    #define PTC_PARK_POS_Z 100.0F
+    #define PTC_PARK_POS   { 0, 0, 100 }
 
     // Probe position to probe and wait for probe to reach target temperature
-    #define PTC_PROBE_POS_X  90.0F
-    #define PTC_PROBE_POS_Y 100.0F
+    #define PTC_PROBE_POS  { 90, 100 }
 
     // Enable additional compensation using hotend temperature
     // Note: this values cannot be calibrated automatically but have to be set manually

config/examples/Creality/Ender-5 Pro/Configuration_adv.h

@@ -1602,13 +1602,10 @@
     #define PTC_MAX_BED_TEMP BED_MAXTEMP
 
     // Park position to wait for probe cooldown
-    #define PTC_PARK_POS_X 0.0F
-    #define PTC_PARK_POS_Y 0.0F
-    #define PTC_PARK_POS_Z 100.0F
+    #define PTC_PARK_POS   { 0, 0, 100 }
 
     // Probe position to probe and wait for probe to reach target temperature
-    #define PTC_PROBE_POS_X  90.0F
-    #define PTC_PROBE_POS_Y 100.0F
+    #define PTC_PROBE_POS  { 90, 100 }
 
     // Enable additional compensation using hotend temperature
     // Note: this values cannot be calibrated automatically but have to be set manually

config/examples/Creality/Ender-5/Configuration_adv.h

@@ -1602,13 +1602,10 @@
     #define PTC_MAX_BED_TEMP BED_MAXTEMP
 
     // Park position to wait for probe cooldown
-    #define PTC_PARK_POS_X 0.0F
-    #define PTC_PARK_POS_Y 0.0F
-    #define PTC_PARK_POS_Z 100.0F
+    #define PTC_PARK_POS   { 0, 0, 100 }
 
     // Probe position to probe and wait for probe to reach target temperature
-    #define PTC_PROBE_POS_X  90.0F
-    #define PTC_PROBE_POS_Y 100.0F
+    #define PTC_PROBE_POS  { 90, 100 }
 
     // Enable additional compensation using hotend temperature
     // Note: this values cannot be calibrated automatically but have to be set manually

config/examples/Dagoma/Disco Ultimate/Configuration_adv.h

@@ -1602,13 +1602,10 @@
     #define PTC_MAX_BED_TEMP BED_MAXTEMP
 
     // Park position to wait for probe cooldown
-    #define PTC_PARK_POS_X 0.0F
-    #define PTC_PARK_POS_Y 0.0F
-    #define PTC_PARK_POS_Z 100.0F
+    #define PTC_PARK_POS   { 0, 0, 100 }
 
     // Probe position to probe and wait for probe to reach target temperature
-    #define PTC_PROBE_POS_X  90.0F
-    #define PTC_PROBE_POS_Y 100.0F
+    #define PTC_PROBE_POS  { 90, 100 }
 
     // Enable additional compensation using hotend temperature
     // Note: this values cannot be calibrated automatically but have to be set manually

config/examples/EXP3D/Imprimante multifonction/Configuration_adv.h

@@ -1602,13 +1602,10 @@
     #define PTC_MAX_BED_TEMP BED_MAXTEMP
 
     // Park position to wait for probe cooldown
-    #define PTC_PARK_POS_X 0.0F
-    #define PTC_PARK_POS_Y 0.0F
-    #define PTC_PARK_POS_Z 100.0F
+    #define PTC_PARK_POS   { 0, 0, 100 }
 
     // Probe position to probe and wait for probe to reach target temperature
-    #define PTC_PROBE_POS_X  90.0F
-    #define PTC_PROBE_POS_Y 100.0F
+    #define PTC_PROBE_POS  { 90, 100 }
 
     // Enable additional compensation using hotend temperature
     // Note: this values cannot be calibrated automatically but have to be set manually

config/examples/Einstart-S/Configuration_adv.h

@@ -1602,13 +1602,10 @@
     #define PTC_MAX_BED_TEMP BED_MAXTEMP
 
     // Park position to wait for probe cooldown
-    #define PTC_PARK_POS_X 0.0F
-    #define PTC_PARK_POS_Y 0.0F
-    #define PTC_PARK_POS_Z 100.0F
+    #define PTC_PARK_POS   { 0, 0, 100 }
 
     // Probe position to probe and wait for probe to reach target temperature
-    #define PTC_PROBE_POS_X  90.0F
-    #define PTC_PROBE_POS_Y 100.0F
+    #define PTC_PROBE_POS  { 90, 100 }
 
     // Enable additional compensation using hotend temperature
     // Note: this values cannot be calibrated automatically but have to be set manually

config/examples/FYSETC/AIO_II/Configuration_adv.h

@@ -1602,13 +1602,10 @@
     #define PTC_MAX_BED_TEMP BED_MAXTEMP
 
     // Park position to wait for probe cooldown
-    #define PTC_PARK_POS_X 0.0F
-    #define PTC_PARK_POS_Y 0.0F
-    #define PTC_PARK_POS_Z 100.0F
+    #define PTC_PARK_POS   { 0, 0, 100 }
 
     // Probe position to probe and wait for probe to reach target temperature
-    #define PTC_PROBE_POS_X  90.0F
-    #define PTC_PROBE_POS_Y 100.0F
+    #define PTC_PROBE_POS  { 90, 100 }
 
     // Enable additional compensation using hotend temperature
     // Note: this values cannot be calibrated automatically but have to be set manually

config/examples/FYSETC/Cheetah 1.2/BLTouch/Configuration_adv.h

@@ -1602,13 +1602,10 @@
     #define PTC_MAX_BED_TEMP BED_MAXTEMP
 
     // Park position to wait for probe cooldown
-    #define PTC_PARK_POS_X 0.0F
-    #define PTC_PARK_POS_Y 0.0F
-    #define PTC_PARK_POS_Z 100.0F
+    #define PTC_PARK_POS   { 0, 0, 100 }
 
     // Probe position to probe and wait for probe to reach target temperature
-    #define PTC_PROBE_POS_X  90.0F
-    #define PTC_PROBE_POS_Y 100.0F
+    #define PTC_PROBE_POS  { 90, 100 }
 
     // Enable additional compensation using hotend temperature
     // Note: this values cannot be calibrated automatically but have to be set manually

config/examples/FYSETC/Cheetah 1.2/base/Configuration_adv.h

@@ -1602,13 +1602,10 @@
     #define PTC_MAX_BED_TEMP BED_MAXTEMP
 
     // Park position to wait for probe cooldown
-    #define PTC_PARK_POS_X 0.0F
-    #define PTC_PARK_POS_Y 0.0F
-    #define PTC_PARK_POS_Z 100.0F
+    #define PTC_PARK_POS   { 0, 0, 100 }
 
     // Probe position to probe and wait for probe to reach target temperature
-    #define PTC_PROBE_POS_X  90.0F
-    #define PTC_PROBE_POS_Y 100.0F
+    #define PTC_PROBE_POS  { 90, 100 }
 
     // Enable additional compensation using hotend temperature
     // Note: this values cannot be calibrated automatically but have to be set manually

config/examples/FYSETC/Cheetah/BLTouch/Configuration_adv.h

@@ -1602,13 +1602,10 @@
     #define PTC_MAX_BED_TEMP BED_MAXTEMP
 
     // Park position to wait for probe cooldown
-    #define PTC_PARK_POS_X 0.0F
-    #define PTC_PARK_POS_Y 0.0F
-    #define PTC_PARK_POS_Z 100.0F
+    #define PTC_PARK_POS   { 0, 0, 100 }
 
     // Probe position to probe and wait for probe to reach target temperature
-    #define PTC_PROBE_POS_X  90.0F
-    #define PTC_PROBE_POS_Y 100.0F
+    #define PTC_PROBE_POS  { 90, 100 }
 
     // Enable additional compensation using hotend temperature
     // Note: this values cannot be calibrated automatically but have to be set manually

config/examples/FYSETC/Cheetah/base/Configuration_adv.h

@@ -1602,13 +1602,10 @@
     #define PTC_MAX_BED_TEMP BED_MAXTEMP
 
     // Park position to wait for probe cooldown
-    #define PTC_PARK_POS_X 0.0F
-    #define PTC_PARK_POS_Y 0.0F
-    #define PTC_PARK_POS_Z 100.0F
+    #define PTC_PARK_POS   { 0, 0, 100 }
 
     // Probe position to probe and wait for probe to reach target temperature
-    #define PTC_PROBE_POS_X  90.0F
-    #define PTC_PROBE_POS_Y 100.0F
+    #define PTC_PROBE_POS  { 90, 100 }
 
     // Enable additional compensation using hotend temperature
     // Note: this values cannot be calibrated automatically but have to be set manually

config/examples/FYSETC/F6_13/Configuration_adv.h

@@ -1602,13 +1602,10 @@
     #define PTC_MAX_BED_TEMP BED_MAXTEMP
 
     // Park position to wait for probe cooldown
-    #define PTC_PARK_POS_X 0.0F
-    #define PTC_PARK_POS_Y 0.0F
-    #define PTC_PARK_POS_Z 100.0F
+    #define PTC_PARK_POS   { 0, 0, 100 }
 
     // Probe position to probe and wait for probe to reach target temperature
-    #define PTC_PROBE_POS_X  90.0F
-    #define PTC_PROBE_POS_Y 100.0F
+    #define PTC_PROBE_POS  { 90, 100 }
 
     // Enable additional compensation using hotend temperature
     // Note: this values cannot be calibrated automatically but have to be set manually

config/examples/FYSETC/S6/Configuration_adv.h

@@ -1602,13 +1602,10 @@
     #define PTC_MAX_BED_TEMP BED_MAXTEMP
 
     // Park position to wait for probe cooldown
-    #define PTC_PARK_POS_X 0.0F
-    #define PTC_PARK_POS_Y 0.0F
-    #define PTC_PARK_POS_Z 100.0F
+    #define PTC_PARK_POS   { 0, 0, 100 }
 
     // Probe position to probe and wait for probe to reach target temperature
-    #define PTC_PROBE_POS_X  90.0F
-    #define PTC_PROBE_POS_Y 100.0F
+    #define PTC_PROBE_POS  { 90, 100 }
 
     // Enable additional compensation using hotend temperature
     // Note: this values cannot be calibrated automatically but have to be set manually

config/examples/Felix/DUAL/Configuration_adv.h

@@ -1602,13 +1602,10 @@
     #define PTC_MAX_BED_TEMP BED_MAXTEMP
 
     // Park position to wait for probe cooldown
-    #define PTC_PARK_POS_X 0.0F
-    #define PTC_PARK_POS_Y 0.0F
-    #define PTC_PARK_POS_Z 100.0F
+    #define PTC_PARK_POS   { 0, 0, 100 }
 
     // Probe position to probe and wait for probe to reach target temperature
-    #define PTC_PROBE_POS_X  90.0F
-    #define PTC_PROBE_POS_Y 100.0F
+    #define PTC_PROBE_POS  { 90, 100 }
 
     // Enable additional compensation using hotend temperature
     // Note: this values cannot be calibrated automatically but have to be set manually

config/examples/Felix/Single/Configuration_adv.h

@@ -1602,13 +1602,10 @@
     #define PTC_MAX_BED_TEMP BED_MAXTEMP
 
     // Park position to wait for probe cooldown
-    #define PTC_PARK_POS_X 0.0F
-    #define PTC_PARK_POS_Y 0.0F
-    #define PTC_PARK_POS_Z 100.0F
+    #define PTC_PARK_POS   { 0, 0, 100 }
 
     // Probe position to probe and wait for probe to reach target temperature
-    #define PTC_PROBE_POS_X  90.0F
-    #define PTC_PROBE_POS_Y 100.0F
+    #define PTC_PROBE_POS  { 90, 100 }
 
     // Enable additional compensation using hotend temperature
     // Note: this values cannot be calibrated automatically but have to be set manually

config/examples/FlashForge/CreatorPro/Configuration_adv.h

@@ -1601,13 +1601,10 @@
     #define PTC_MAX_BED_TEMP BED_MAXTEMP
 
     // Park position to wait for probe cooldown
-    #define PTC_PARK_POS_X 0.0F
-    #define PTC_PARK_POS_Y 0.0F
-    #define PTC_PARK_POS_Z 100.0F
+    #define PTC_PARK_POS   { 0, 0, 100 }
 
     // Probe position to probe and wait for probe to reach target temperature
-    #define PTC_PROBE_POS_X  90.0F
-    #define PTC_PROBE_POS_Y 100.0F
+    #define PTC_PROBE_POS  { 90, 100 }
 
     // Enable additional compensation using hotend temperature
     // Note: this values cannot be calibrated automatically but have to be set manually

config/examples/FolgerTech/i3-2020/Configuration_adv.h

@@ -1602,13 +1602,10 @@
     #define PTC_MAX_BED_TEMP BED_MAXTEMP
 
     // Park position to wait for probe cooldown
-    #define PTC_PARK_POS_X 0.0F
-    #define PTC_PARK_POS_Y 0.0F
-    #define PTC_PARK_POS_Z 100.0F
+    #define PTC_PARK_POS   { 0, 0, 100 }
 
     // Probe position to probe and wait for probe to reach target temperature
-    #define PTC_PROBE_POS_X  90.0F
-    #define PTC_PROBE_POS_Y 100.0F
+    #define PTC_PROBE_POS  { 90, 100 }
 
     // Enable additional compensation using hotend temperature
     // Note: this values cannot be calibrated automatically but have to be set manually

config/examples/Formbot/Raptor/Configuration_adv.h

@@ -1604,13 +1604,10 @@
     #define PTC_MAX_BED_TEMP BED_MAXTEMP
 
     // Park position to wait for probe cooldown
-    #define PTC_PARK_POS_X 0.0F
-    #define PTC_PARK_POS_Y 0.0F
-    #define PTC_PARK_POS_Z 100.0F
+    #define PTC_PARK_POS   { 0, 0, 100 }
 
     // Probe position to probe and wait for probe to reach target temperature
-    #define PTC_PROBE_POS_X  90.0F
-    #define PTC_PROBE_POS_Y 100.0F
+    #define PTC_PROBE_POS  { 90, 100 }
 
     // Enable additional compensation using hotend temperature
     // Note: this values cannot be calibrated automatically but have to be set manually

config/examples/Formbot/T_Rex_2+/Configuration_adv.h

@@ -1604,13 +1604,10 @@
     #define PTC_MAX_BED_TEMP BED_MAXTEMP
 
     // Park position to wait for probe cooldown
-    #define PTC_PARK_POS_X 0.0F
-    #define PTC_PARK_POS_Y 0.0F
-    #define PTC_PARK_POS_Z 100.0F
+    #define PTC_PARK_POS   { 0, 0, 100 }
 
     // Probe position to probe and wait for probe to reach target temperature
-    #define PTC_PROBE_POS_X  90.0F
-    #define PTC_PROBE_POS_Y 100.0F
+    #define PTC_PROBE_POS  { 90, 100 }
 
     // Enable additional compensation using hotend temperature
     // Note: this values cannot be calibrated automatically but have to be set manually

config/examples/Formbot/T_Rex_3/Configuration_adv.h

@@ -1606,13 +1606,10 @@
     #define PTC_MAX_BED_TEMP BED_MAXTEMP
 
     // Park position to wait for probe cooldown
-    #define PTC_PARK_POS_X 0.0F
-    #define PTC_PARK_POS_Y 0.0F
-    #define PTC_PARK_POS_Z 100.0F
+    #define PTC_PARK_POS   { 0, 0, 100 }
 
     // Probe position to probe and wait for probe to reach target temperature
-    #define PTC_PROBE_POS_X  90.0F
-    #define PTC_PROBE_POS_Y 100.0F
+    #define PTC_PROBE_POS  { 90, 100 }
 
     // Enable additional compensation using hotend temperature
     // Note: this values cannot be calibrated automatically but have to be set manually

config/examples/Geeetech/A10/Configuration_adv.h

@@ -1602,13 +1602,10 @@
     #define PTC_MAX_BED_TEMP BED_MAXTEMP
 
     // Park position to wait for probe cooldown
-    #define PTC_PARK_POS_X 0.0F
-    #define PTC_PARK_POS_Y 0.0F
-    #define PTC_PARK_POS_Z 100.0F
+    #define PTC_PARK_POS   { 0, 0, 100 }
 
     // Probe position to probe and wait for probe to reach target temperature
-    #define PTC_PROBE_POS_X  90.0F
-    #define PTC_PROBE_POS_Y 100.0F
+    #define PTC_PROBE_POS  { 90, 100 }
 
     // Enable additional compensation using hotend temperature
     // Note: this values cannot be calibrated automatically but have to be set manually

config/examples/Geeetech/A10D/Configuration_adv.h

@@ -1602,13 +1602,10 @@
     #define PTC_MAX_BED_TEMP BED_MAXTEMP
 
     // Park position to wait for probe cooldown
-    #define PTC_PARK_POS_X 0.0F
-    #define PTC_PARK_POS_Y 0.0F
-    #define PTC_PARK_POS_Z 100.0F
+    #define PTC_PARK_POS   { 0, 0, 100 }
 
     // Probe position to probe and wait for probe to reach target temperature
-    #define PTC_PROBE_POS_X  90.0F
-    #define PTC_PROBE_POS_Y 100.0F
+    #define PTC_PROBE_POS  { 90, 100 }
 
     // Enable additional compensation using hotend temperature
     // Note: this values cannot be calibrated automatically but have to be set manually

config/examples/Geeetech/A10M/Configuration_adv.h

@@ -1602,13 +1602,10 @@
     #define PTC_MAX_BED_TEMP BED_MAXTEMP
 
     // Park position to wait for probe cooldown
-    #define PTC_PARK_POS_X 0.0F
-    #define PTC_PARK_POS_Y 0.0F
-    #define PTC_PARK_POS_Z 100.0F
+    #define PTC_PARK_POS   { 0, 0, 100 }
 
     // Probe position to probe and wait for probe to reach target temperature
-    #define PTC_PROBE_POS_X  90.0F
-    #define PTC_PROBE_POS_Y 100.0F
+    #define PTC_PROBE_POS  { 90, 100 }
 
     // Enable additional compensation using hotend temperature
     // Note: this values cannot be calibrated automatically but have to be set manually

config/examples/Geeetech/A10T/Configuration_adv.h

@@ -1602,13 +1602,10 @@
     #define PTC_MAX_BED_TEMP BED_MAXTEMP
 
     // Park position to wait for probe cooldown
-    #define PTC_PARK_POS_X 0.0F
-    #define PTC_PARK_POS_Y 0.0F
-    #define PTC_PARK_POS_Z 100.0F
+    #define PTC_PARK_POS   { 0, 0, 100 }
 
     // Probe position to probe and wait for probe to reach target temperature
-    #define PTC_PROBE_POS_X  90.0F
-    #define PTC_PROBE_POS_Y 100.0F
+    #define PTC_PROBE_POS  { 90, 100 }
 
     // Enable additional compensation using hotend temperature
     // Note: this values cannot be calibrated automatically but have to be set manually

config/examples/Geeetech/A20/Configuration_adv.h

@@ -1602,13 +1602,10 @@
     #define PTC_MAX_BED_TEMP BED_MAXTEMP
 
     // Park position to wait for probe cooldown
-    #define PTC_PARK_POS_X 0.0F
-    #define PTC_PARK_POS_Y 0.0F
-    #define PTC_PARK_POS_Z 100.0F
+    #define PTC_PARK_POS   { 0, 0, 100 }
 
     // Probe position to probe and wait for probe to reach target temperature
-    #define PTC_PROBE_POS_X  90.0F
-    #define PTC_PROBE_POS_Y 100.0F
+    #define PTC_PROBE_POS  { 90, 100 }
 
     // Enable additional compensation using hotend temperature
     // Note: this values cannot be calibrated automatically but have to be set manually

config/examples/Geeetech/A20M/Configuration_adv.h

@@ -1602,13 +1602,10 @@
     #define PTC_MAX_BED_TEMP BED_MAXTEMP
 
     // Park position to wait for probe cooldown
-    #define PTC_PARK_POS_X 0.0F
-    #define PTC_PARK_POS_Y 0.0F
-    #define PTC_PARK_POS_Z 100.0F
+    #define PTC_PARK_POS   { 0, 0, 100 }
 
     // Probe position to probe and wait for probe to reach target temperature
-    #define PTC_PROBE_POS_X  90.0F
-    #define PTC_PROBE_POS_Y 100.0F
+    #define PTC_PROBE_POS  { 90, 100 }
 
     // Enable additional compensation using hotend temperature
     // Note: this values cannot be calibrated automatically but have to be set manually

config/examples/Geeetech/A20T/Configuration_adv.h

@@ -1602,13 +1602,10 @@
     #define PTC_MAX_BED_TEMP BED_MAXTEMP
 
     // Park position to wait for probe cooldown
-    #define PTC_PARK_POS_X 0.0F
-    #define PTC_PARK_POS_Y 0.0F
-    #define PTC_PARK_POS_Z 100.0F
+    #define PTC_PARK_POS   { 0, 0, 100 }
 
     // Probe position to probe and wait for probe to reach target temperature
-    #define PTC_PROBE_POS_X  90.0F
-    #define PTC_PROBE_POS_Y 100.0F
+    #define PTC_PROBE_POS  { 90, 100 }
 
     // Enable additional compensation using hotend temperature
     // Note: this values cannot be calibrated automatically but have to be set manually

config/examples/Geeetech/A30/Configuration_adv.h

@@ -1602,13 +1602,10 @@
     #define PTC_MAX_BED_TEMP BED_MAXTEMP
 
     // Park position to wait for probe cooldown
-    #define PTC_PARK_POS_X 0.0F
-    #define PTC_PARK_POS_Y 0.0F
-    #define PTC_PARK_POS_Z 100.0F
+    #define PTC_PARK_POS   { 0, 0, 100 }
 
     // Probe position to probe and wait for probe to reach target temperature
-    #define PTC_PROBE_POS_X  90.0F
-    #define PTC_PROBE_POS_Y 100.0F
+    #define PTC_PROBE_POS  { 90, 100 }
 
     // Enable additional compensation using hotend temperature
     // Note: this values cannot be calibrated automatically but have to be set manually

config/examples/Geeetech/D200/Configuration_adv.h

@@ -1602,13 +1602,10 @@
     #define PTC_MAX_BED_TEMP BED_MAXTEMP
 
     // Park position to wait for probe cooldown
-    #define PTC_PARK_POS_X 0.0F
-    #define PTC_PARK_POS_Y 0.0F
-    #define PTC_PARK_POS_Z 100.0F
+    #define PTC_PARK_POS   { 0, 0, 100 }
 
     // Probe position to probe and wait for probe to reach target temperature
-    #define PTC_PROBE_POS_X  90.0F
-    #define PTC_PROBE_POS_Y 100.0F
+    #define PTC_PROBE_POS  { 90, 100 }
 
     // Enable additional compensation using hotend temperature
     // Note: this values cannot be calibrated automatically but have to be set manually

config/examples/Geeetech/Duplicator5/Configuration_adv.h

@@ -1602,13 +1602,10 @@
     #define PTC_MAX_BED_TEMP BED_MAXTEMP
 
     // Park position to wait for probe cooldown
-    #define PTC_PARK_POS_X 0.0F
-    #define PTC_PARK_POS_Y 0.0F
-    #define PTC_PARK_POS_Z 100.0F
+    #define PTC_PARK_POS   { 0, 0, 100 }
 
     // Probe position to probe and wait for probe to reach target temperature
-    #define PTC_PROBE_POS_X  90.0F
-    #define PTC_PROBE_POS_Y 100.0F
+    #define PTC_PROBE_POS  { 90, 100 }
 
     // Enable additional compensation using hotend temperature
     // Note: this values cannot be calibrated automatically but have to be set manually

config/examples/Geeetech/E180/Configuration_adv.h

@@ -1602,13 +1602,10 @@
     #define PTC_MAX_BED_TEMP BED_MAXTEMP
 
     // Park position to wait for probe cooldown
-    #define PTC_PARK_POS_X 0.0F
-    #define PTC_PARK_POS_Y 0.0F
-    #define PTC_PARK_POS_Z 100.0F
+    #define PTC_PARK_POS   { 0, 0, 100 }
 
     // Probe position to probe and wait for probe to reach target temperature
-    #define PTC_PROBE_POS_X  90.0F
-    #define PTC_PROBE_POS_Y 100.0F
+    #define PTC_PROBE_POS  { 90, 100 }
 
     // Enable additional compensation using hotend temperature
     // Note: this values cannot be calibrated automatically but have to be set manually

config/examples/Geeetech/M201/Configuration_adv.h

@@ -1602,13 +1602,10 @@
     #define PTC_MAX_BED_TEMP BED_MAXTEMP
 
     // Park position to wait for probe cooldown
-    #define PTC_PARK_POS_X 0.0F
-    #define PTC_PARK_POS_Y 0.0F
-    #define PTC_PARK_POS_Z 100.0F
+    #define PTC_PARK_POS   { 0, 0, 100 }
 
     // Probe position to probe and wait for probe to reach target temperature
-    #define PTC_PROBE_POS_X  90.0F
-    #define PTC_PROBE_POS_Y 100.0F
+    #define PTC_PROBE_POS  { 90, 100 }
 
     // Enable additional compensation using hotend temperature
     // Note: this values cannot be calibrated automatically but have to be set manually

config/examples/Geeetech/MeCreator2/Configuration_adv.h

@@ -1601,13 +1601,10 @@
     #define PTC_MAX_BED_TEMP BED_MAXTEMP
 
     // Park position to wait for probe cooldown
-    #define PTC_PARK_POS_X 0.0F
-    #define PTC_PARK_POS_Y 0.0F
-    #define PTC_PARK_POS_Z 100.0F
+    #define PTC_PARK_POS   { 0, 0, 100 }
 
     // Probe position to probe and wait for probe to reach target temperature
-    #define PTC_PROBE_POS_X  90.0F
-    #define PTC_PROBE_POS_Y 100.0F
+    #define PTC_PROBE_POS  { 90, 100 }
 
     // Enable additional compensation using hotend temperature
     // Note: this values cannot be calibrated automatically but have to be set manually

config/examples/Geeetech/Me_creator/Configuration_adv.h

@@ -1602,13 +1602,10 @@
     #define PTC_MAX_BED_TEMP BED_MAXTEMP
 
     // Park position to wait for probe cooldown
-    #define PTC_PARK_POS_X 0.0F
-    #define PTC_PARK_POS_Y 0.0F
-    #define PTC_PARK_POS_Z 100.0F
+    #define PTC_PARK_POS   { 0, 0, 100 }
 
     // Probe position to probe and wait for probe to reach target temperature
-    #define PTC_PROBE_POS_X  90.0F
-    #define PTC_PROBE_POS_Y 100.0F
+    #define PTC_PROBE_POS  { 90, 100 }
 
     // Enable additional compensation using hotend temperature
     // Note: this values cannot be calibrated automatically but have to be set manually

config/examples/Geeetech/Me_ducer/Configuration_adv.h

@@ -1602,13 +1602,10 @@
     #define PTC_MAX_BED_TEMP BED_MAXTEMP
 
     // Park position to wait for probe cooldown
-    #define PTC_PARK_POS_X 0.0F
-    #define PTC_PARK_POS_Y 0.0F
-    #define PTC_PARK_POS_Z 100.0F
+    #define PTC_PARK_POS   { 0, 0, 100 }
 
     // Probe position to probe and wait for probe to reach target temperature
-    #define PTC_PROBE_POS_X  90.0F
-    #define PTC_PROBE_POS_Y 100.0F
+    #define PTC_PROBE_POS  { 90, 100 }
 
     // Enable additional compensation using hotend temperature
     // Note: this values cannot be calibrated automatically but have to be set manually

config/examples/Geeetech/PI3A PRO/Configuration_adv.h

@@ -1602,13 +1602,10 @@
     #define PTC_MAX_BED_TEMP BED_MAXTEMP
 
     // Park position to wait for probe cooldown
-    #define PTC_PARK_POS_X 0.0F
-    #define PTC_PARK_POS_Y 0.0F
-    #define PTC_PARK_POS_Z 100.0F
+    #define PTC_PARK_POS   { 0, 0, 100 }
 
     // Probe position to probe and wait for probe to reach target temperature
-    #define PTC_PROBE_POS_X  90.0F
-    #define PTC_PROBE_POS_Y 100.0F
+    #define PTC_PROBE_POS  { 90, 100 }
 
     // Enable additional compensation using hotend temperature
     // Note: this values cannot be calibrated automatically but have to be set manually

config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h

@@ -1602,13 +1602,10 @@
     #define PTC_MAX_BED_TEMP BED_MAXTEMP
 
     // Park position to wait for probe cooldown
-    #define PTC_PARK_POS_X 0.0F
-    #define PTC_PARK_POS_Y 0.0F
-    #define PTC_PARK_POS_Z 100.0F
+    #define PTC_PARK_POS   { 0, 0, 100 }
 
     // Probe position to probe and wait for probe to reach target temperature
-    #define PTC_PROBE_POS_X  90.0F
-    #define PTC_PROBE_POS_Y 100.0F
+    #define PTC_PROBE_POS  { 90, 100 }
 
     // Enable additional compensation using hotend temperature
     // Note: this values cannot be calibrated automatically but have to be set manually

config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h

@@ -1602,13 +1602,10 @@
     #define PTC_MAX_BED_TEMP BED_MAXTEMP
 
     // Park position to wait for probe cooldown
-    #define PTC_PARK_POS_X 0.0F
-    #define PTC_PARK_POS_Y 0.0F
-    #define PTC_PARK_POS_Z 100.0F
+    #define PTC_PARK_POS   { 0, 0, 100 }
 
     // Probe position to probe and wait for probe to reach target temperature
-    #define PTC_PROBE_POS_X  90.0F
-    #define PTC_PROBE_POS_Y 100.0F
+    #define PTC_PROBE_POS  { 90, 100 }
 
     // Enable additional compensation using hotend temperature
     // Note: this values cannot be calibrated automatically but have to be set manually

config/examples/HMS434/Configuration_adv.h

@@ -1595,13 +1595,10 @@
     #define PTC_MAX_BED_TEMP BED_MAXTEMP
 
     // Park position to wait for probe cooldown
-    #define PTC_PARK_POS_X 0.0F
-    #define PTC_PARK_POS_Y 0.0F
-    #define PTC_PARK_POS_Z 100.0F
+    #define PTC_PARK_POS   { 0, 0, 100 }
 
     // Probe position to probe and wait for probe to reach target temperature
-    #define PTC_PROBE_POS_X  90.0F
-    #define PTC_PROBE_POS_Y 100.0F
+    #define PTC_PROBE_POS  { 90, 100 }
 
     // Enable additional compensation using hotend temperature
     // Note: this values cannot be calibrated automatically but have to be set manually

config/examples/Infitary/i3-M508/Configuration_adv.h

@@ -1602,13 +1602,10 @@
     #define PTC_MAX_BED_TEMP BED_MAXTEMP
 
     // Park position to wait for probe cooldown
-    #define PTC_PARK_POS_X 0.0F
-    #define PTC_PARK_POS_Y 0.0F
-    #define PTC_PARK_POS_Z 100.0F
+    #define PTC_PARK_POS   { 0, 0, 100 }
 
     // Probe position to probe and wait for probe to reach target temperature
-    #define PTC_PROBE_POS_X  90.0F
-    #define PTC_PROBE_POS_Y 100.0F
+    #define PTC_PROBE_POS  { 90, 100 }
 
     // Enable additional compensation using hotend temperature
     // Note: this values cannot be calibrated automatically but have to be set manually

config/examples/Intamsys/FunmatHT_4988/Configuration_adv.h

@@ -1605,13 +1605,10 @@
     #define PTC_MAX_BED_TEMP BED_MAXTEMP
 
     // Park position to wait for probe cooldown
-    #define PTC_PARK_POS_X 0.0F
-    #define PTC_PARK_POS_Y 0.0F
-    #define PTC_PARK_POS_Z 100.0F
+    #define PTC_PARK_POS   { 0, 0, 100 }
 
     // Probe position to probe and wait for probe to reach target temperature
-    #define PTC_PROBE_POS_X  90.0F
-    #define PTC_PROBE_POS_Y 100.0F
+    #define PTC_PROBE_POS  { 90, 100 }
 
     // Enable additional compensation using hotend temperature
     // Note: this values cannot be calibrated automatically but have to be set manually

config/examples/JGAurora/A1/Configuration_adv.h

@@ -1607,13 +1607,10 @@
     #define PTC_MAX_BED_TEMP BED_MAXTEMP
 
     // Park position to wait for probe cooldown
-    #define PTC_PARK_POS_X 0.0F
-    #define PTC_PARK_POS_Y 0.0F
-    #define PTC_PARK_POS_Z 100.0F
+    #define PTC_PARK_POS   { 0, 0, 100 }
 
     // Probe position to probe and wait for probe to reach target temperature
-    #define PTC_PROBE_POS_X  90.0F
-    #define PTC_PROBE_POS_Y 100.0F
+    #define PTC_PROBE_POS  { 90, 100 }
 
     // Enable additional compensation using hotend temperature
     // Note: this values cannot be calibrated automatically but have to be set manually

config/examples/JGAurora/A5/Configuration_adv.h

@@ -1602,13 +1602,10 @@
     #define PTC_MAX_BED_TEMP BED_MAXTEMP
 
     // Park position to wait for probe cooldown
-    #define PTC_PARK_POS_X 0.0F
-    #define PTC_PARK_POS_Y 0.0F
-    #define PTC_PARK_POS_Z 100.0F
+    #define PTC_PARK_POS   { 0, 0, 100 }
 
     // Probe position to probe and wait for probe to reach target temperature
-    #define PTC_PROBE_POS_X  90.0F
-    #define PTC_PROBE_POS_Y 100.0F
+    #define PTC_PROBE_POS  { 90, 100 }
 
     // Enable additional compensation using hotend temperature
     // Note: this values cannot be calibrated automatically but have to be set manually

config/examples/JGAurora/A5S/Configuration_adv.h

@@ -1607,13 +1607,10 @@
     #define PTC_MAX_BED_TEMP BED_MAXTEMP
 
     // Park position to wait for probe cooldown
-    #define PTC_PARK_POS_X 0.0F
-    #define PTC_PARK_POS_Y 0.0F
-    #define PTC_PARK_POS_Z 100.0F
+    #define PTC_PARK_POS   { 0, 0, 100 }
 
     // Probe position to probe and wait for probe to reach target temperature
-    #define PTC_PROBE_POS_X  90.0F
-    #define PTC_PROBE_POS_Y 100.0F
+    #define PTC_PROBE_POS  { 90, 100 }
 
     // Enable additional compensation using hotend temperature
     // Note: this values cannot be calibrated automatically but have to be set manually

config/examples/JGAurora/Magic/Configuration_adv.h

@@ -1602,13 +1602,10 @@
     #define PTC_MAX_BED_TEMP BED_MAXTEMP
 
     // Park position to wait for probe cooldown
-    #define PTC_PARK_POS_X 0.0F
-    #define PTC_PARK_POS_Y 0.0F
-    #define PTC_PARK_POS_Z 100.0F
+    #define PTC_PARK_POS   { 0, 0, 100 }
 
     // Probe position to probe and wait for probe to reach target temperature
-    #define PTC_PROBE_POS_X  90.0F
-    #define PTC_PROBE_POS_Y 100.0F
+    #define PTC_PROBE_POS  { 90, 100 }
 
     // Enable additional compensation using hotend temperature
     // Note: this values cannot be calibrated automatically but have to be set manually

config/examples/MakerFarm/Pegasus_12/Configuration_adv.h

@@ -1601,13 +1601,10 @@
     #define PTC_MAX_BED_TEMP BED_MAXTEMP
 
     // Park position to wait for probe cooldown
-    #define PTC_PARK_POS_X 0.0F
-    #define PTC_PARK_POS_Y 0.0F
-    #define PTC_PARK_POS_Z 100.0F
+    #define PTC_PARK_POS   { 0, 0, 100 }
 
     // Probe position to probe and wait for probe to reach target temperature
-    #define PTC_PROBE_POS_X  90.0F
-    #define PTC_PROBE_POS_Y 100.0F
+    #define PTC_PROBE_POS  { 90, 100 }
 
     // Enable additional compensation using hotend temperature
     // Note: this values cannot be calibrated automatically but have to be set manually

config/examples/MakerParts/Configuration_adv.h

@@ -1602,13 +1602,10 @@
     #define PTC_MAX_BED_TEMP BED_MAXTEMP
 
     // Park position to wait for probe cooldown
-    #define PTC_PARK_POS_X 0.0F
-    #define PTC_PARK_POS_Y 0.0F
-    #define PTC_PARK_POS_Z 100.0F
+    #define PTC_PARK_POS   { 0, 0, 100 }
 
     // Probe position to probe and wait for probe to reach target temperature
-    #define PTC_PROBE_POS_X  90.0F
-    #define PTC_PROBE_POS_Y 100.0F
+    #define PTC_PROBE_POS  { 90, 100 }
 
     // Enable additional compensation using hotend temperature
     // Note: this values cannot be calibrated automatically but have to be set manually

config/examples/Malyan/M150/Configuration_adv.h

@@ -1602,13 +1602,10 @@
     #define PTC_MAX_BED_TEMP BED_MAXTEMP
 
     // Park position to wait for probe cooldown
-    #define PTC_PARK_POS_X 0.0F
-    #define PTC_PARK_POS_Y 0.0F
-    #define PTC_PARK_POS_Z 100.0F
+    #define PTC_PARK_POS   { 0, 0, 100 }
 
     // Probe position to probe and wait for probe to reach target temperature
-    #define PTC_PROBE_POS_X  90.0F
-    #define PTC_PROBE_POS_Y 100.0F
+    #define PTC_PROBE_POS  { 90, 100 }
 
     // Enable additional compensation using hotend temperature
     // Note: this values cannot be calibrated automatically but have to be set manually

config/examples/Malyan/M200/Configuration_adv.h

@@ -1604,13 +1604,10 @@
     #define PTC_MAX_BED_TEMP BED_MAXTEMP
 
     // Park position to wait for probe cooldown
-    #define PTC_PARK_POS_X 0.0F
-    #define PTC_PARK_POS_Y 0.0F
-    #define PTC_PARK_POS_Z 100.0F
+    #define PTC_PARK_POS   { 0, 0, 100 }
 
     // Probe position to probe and wait for probe to reach target temperature
-    #define PTC_PROBE_POS_X  90.0F
-    #define PTC_PROBE_POS_Y 100.0F
+    #define PTC_PROBE_POS  { 90, 100 }
 
     // Enable additional compensation using hotend temperature
     // Note: this values cannot be calibrated automatically but have to be set manually

config/examples/Micromake/C1/enhanced/Configuration_adv.h

@@ -1602,13 +1602,10 @@
     #define PTC_MAX_BED_TEMP BED_MAXTEMP
 
     // Park position to wait for probe cooldown
-    #define PTC_PARK_POS_X 0.0F
-    #define PTC_PARK_POS_Y 0.0F
-    #define PTC_PARK_POS_Z 100.0F
+    #define PTC_PARK_POS   { 0, 0, 100 }
 
     // Probe position to probe and wait for probe to reach target temperature
-    #define PTC_PROBE_POS_X  90.0F
-    #define PTC_PROBE_POS_Y 100.0F
+    #define PTC_PROBE_POS  { 90, 100 }
 
     // Enable additional compensation using hotend temperature
     // Note: this values cannot be calibrated automatically but have to be set manually

config/examples/Mks/Robin/Configuration_adv.h

@@ -1602,13 +1602,10 @@
     #define PTC_MAX_BED_TEMP BED_MAXTEMP
 
     // Park position to wait for probe cooldown
-    #define PTC_PARK_POS_X 0.0F
-    #define PTC_PARK_POS_Y 0.0F
-    #define PTC_PARK_POS_Z 100.0F
+    #define PTC_PARK_POS   { 0, 0, 100 }
 
     // Probe position to probe and wait for probe to reach target temperature
-    #define PTC_PROBE_POS_X  90.0F
-    #define PTC_PROBE_POS_Y 100.0F
+    #define PTC_PROBE_POS  { 90, 100 }
 
     // Enable additional compensation using hotend temperature
     // Note: this values cannot be calibrated automatically but have to be set manually

config/examples/Mks/Sbase/Configuration_adv.h

@@ -1603,13 +1603,10 @@
     #define PTC_MAX_BED_TEMP BED_MAXTEMP
 
     // Park position to wait for probe cooldown
-    #define PTC_PARK_POS_X 0.0F
-    #define PTC_PARK_POS_Y 0.0F
-    #define PTC_PARK_POS_Z 100.0F
+    #define PTC_PARK_POS   { 0, 0, 100 }
 
     // Probe position to probe and wait for probe to reach target temperature
-    #define PTC_PROBE_POS_X  90.0F
-    #define PTC_PROBE_POS_Y 100.0F
+    #define PTC_PROBE_POS  { 90, 100 }
 
     // Enable additional compensation using hotend temperature
     // Note: this values cannot be calibrated automatically but have to be set manually

config/examples/Modix/Big60/Configuration_adv.h

@@ -1602,13 +1602,10 @@
     #define PTC_MAX_BED_TEMP BED_MAXTEMP
 
     // Park position to wait for probe cooldown
-    #define PTC_PARK_POS_X 0.0F
-    #define PTC_PARK_POS_Y 0.0F
-    #define PTC_PARK_POS_Z 100.0F
+    #define PTC_PARK_POS   { 0, 0, 100 }
 
     // Probe position to probe and wait for probe to reach target temperature
-    #define PTC_PROBE_POS_X  90.0F
-    #define PTC_PROBE_POS_Y 100.0F
+    #define PTC_PROBE_POS  { 90, 100 }
 
     // Enable additional compensation using hotend temperature
     // Note: this values cannot be calibrated automatically but have to be set manually

config/examples/RapideLite/RL200/Configuration_adv.h

@@ -1602,13 +1602,10 @@
     #define PTC_MAX_BED_TEMP BED_MAXTEMP
 
     // Park position to wait for probe cooldown
-    #define PTC_PARK_POS_X 0.0F
-    #define PTC_PARK_POS_Y 0.0F
-    #define PTC_PARK_POS_Z 100.0F
+    #define PTC_PARK_POS   { 0, 0, 100 }
 
     // Probe position to probe and wait for probe to reach target temperature
-    #define PTC_PROBE_POS_X  90.0F
-    #define PTC_PROBE_POS_Y 100.0F
+    #define PTC_PROBE_POS  { 90, 100 }
 
     // Enable additional compensation using hotend temperature
     // Note: this values cannot be calibrated automatically but have to be set manually

config/examples/Renkforce/RF100/Configuration_adv.h

@@ -1602,13 +1602,10 @@
     #define PTC_MAX_BED_TEMP BED_MAXTEMP
 
     // Park position to wait for probe cooldown
-    #define PTC_PARK_POS_X 0.0F
-    #define PTC_PARK_POS_Y 0.0F
-    #define PTC_PARK_POS_Z 100.0F
+    #define PTC_PARK_POS   { 0, 0, 100 }
 
     // Probe position to probe and wait for probe to reach target temperature
-    #define PTC_PROBE_POS_X  90.0F
-    #define PTC_PROBE_POS_Y 100.0F
+    #define PTC_PROBE_POS  { 90, 100 }
 
     // Enable additional compensation using hotend temperature
     // Note: this values cannot be calibrated automatically but have to be set manually

config/examples/Renkforce/RF100XL/Configuration_adv.h

@@ -1602,13 +1602,10 @@
     #define PTC_MAX_BED_TEMP BED_MAXTEMP
 
     // Park position to wait for probe cooldown
-    #define PTC_PARK_POS_X 0.0F
-    #define PTC_PARK_POS_Y 0.0F
-    #define PTC_PARK_POS_Z 100.0F
+    #define PTC_PARK_POS   { 0, 0, 100 }
 
     // Probe position to probe and wait for probe to reach target temperature
-    #define PTC_PROBE_POS_X  90.0F
-    #define PTC_PROBE_POS_Y 100.0F
+    #define PTC_PROBE_POS  { 90, 100 }
 
     // Enable additional compensation using hotend temperature
     // Note: this values cannot be calibrated automatically but have to be set manually

config/examples/Renkforce/RF100v2/Configuration_adv.h

@@ -1602,13 +1602,10 @@
     #define PTC_MAX_BED_TEMP BED_MAXTEMP
 
     // Park position to wait for probe cooldown
-    #define PTC_PARK_POS_X 0.0F
-    #define PTC_PARK_POS_Y 0.0F
-    #define PTC_PARK_POS_Z 100.0F
+    #define PTC_PARK_POS   { 0, 0, 100 }
 
     // Probe position to probe and wait for probe to reach target temperature
-    #define PTC_PROBE_POS_X  90.0F
-    #define PTC_PROBE_POS_Y 100.0F
+    #define PTC_PROBE_POS  { 90, 100 }
 
     // Enable additional compensation using hotend temperature
     // Note: this values cannot be calibrated automatically but have to be set manually

config/examples/RigidBot/Configuration_adv.h

@@ -1602,13 +1602,10 @@
     #define PTC_MAX_BED_TEMP BED_MAXTEMP
 
     // Park position to wait for probe cooldown
-    #define PTC_PARK_POS_X 0.0F
-    #define PTC_PARK_POS_Y 0.0F
-    #define PTC_PARK_POS_Z 100.0F
+    #define PTC_PARK_POS   { 0, 0, 100 }
 
     // Probe position to probe and wait for probe to reach target temperature
-    #define PTC_PROBE_POS_X  90.0F
-    #define PTC_PROBE_POS_Y 100.0F
+    #define PTC_PROBE_POS  { 90, 100 }
 
     // Enable additional compensation using hotend temperature
     // Note: this values cannot be calibrated automatically but have to be set manually

config/examples/SCARA/MP_SCARA/Configuration_adv.h

@@ -1599,13 +1599,10 @@
     #define PTC_MAX_BED_TEMP BED_MAXTEMP
 
     // Park position to wait for probe cooldown
-    #define PTC_PARK_POS_X 0.0F
-    #define PTC_PARK_POS_Y 0.0F
-    #define PTC_PARK_POS_Z 100.0F
+    #define PTC_PARK_POS   { 0, 0, 100 }
 
     // Probe position to probe and wait for probe to reach target temperature
-    #define PTC_PROBE_POS_X  90.0F
-    #define PTC_PROBE_POS_Y 100.0F
+    #define PTC_PROBE_POS  { 90, 100 }
 
     // Enable additional compensation using hotend temperature
     // Note: this values cannot be calibrated automatically but have to be set manually

config/examples/SCARA/Morgan/Configuration_adv.h

@@ -1599,13 +1599,10 @@
     #define PTC_MAX_BED_TEMP BED_MAXTEMP
 
     // Park position to wait for probe cooldown
-    #define PTC_PARK_POS_X 0.0F
-    #define PTC_PARK_POS_Y 0.0F
-    #define PTC_PARK_POS_Z 100.0F
+    #define PTC_PARK_POS   { 0, 0, 100 }
 
     // Probe position to probe and wait for probe to reach target temperature
-    #define PTC_PROBE_POS_X  90.0F
-    #define PTC_PROBE_POS_Y 100.0F
+    #define PTC_PROBE_POS  { 90, 100 }
 
     // Enable additional compensation using hotend temperature
     // Note: this values cannot be calibrated automatically but have to be set manually