diff --git a/config/default/Configuration_adv.h b/config/default/Configuration_adv.h index be198b18ee..18f84ff6ec 100644 --- a/config/default/Configuration_adv.h +++ b/config/default/Configuration_adv.h @@ -808,7 +808,9 @@ #define RESTORE_LEVELING_AFTER_G35 // Enable to restore leveling setup after operation //#define REPORT_TRAMMING_MM // Report Z deviation (mm) for each point relative to the first - //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item for Assisted Tramming + + //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item to run G35 Assisted Tramming (MarlinUI) + //#define ASSISTED_TRAMMING_WIZARD // Make the menu item open a Tramming Wizard sub-menu /** * Screw thread: diff --git a/config/examples/3DFabXYZ/Migbot/Configuration_adv.h b/config/examples/3DFabXYZ/Migbot/Configuration_adv.h index ca629d35c9..cf77c324fc 100644 --- a/config/examples/3DFabXYZ/Migbot/Configuration_adv.h +++ b/config/examples/3DFabXYZ/Migbot/Configuration_adv.h @@ -808,7 +808,9 @@ #define RESTORE_LEVELING_AFTER_G35 // Enable to restore leveling setup after operation //#define REPORT_TRAMMING_MM // Report Z deviation (mm) for each point relative to the first - //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item for Assisted Tramming + + //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item to run G35 Assisted Tramming (MarlinUI) + //#define ASSISTED_TRAMMING_WIZARD // Make the menu item open a Tramming Wizard sub-menu /** * Screw thread: diff --git a/config/examples/ADIMLab/Gantry v1/Configuration_adv.h b/config/examples/ADIMLab/Gantry v1/Configuration_adv.h index bd6ffd6941..9fb252068d 100644 --- a/config/examples/ADIMLab/Gantry v1/Configuration_adv.h +++ b/config/examples/ADIMLab/Gantry v1/Configuration_adv.h @@ -808,7 +808,9 @@ #define RESTORE_LEVELING_AFTER_G35 // Enable to restore leveling setup after operation //#define REPORT_TRAMMING_MM // Report Z deviation (mm) for each point relative to the first - //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item for Assisted Tramming + + //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item to run G35 Assisted Tramming (MarlinUI) + //#define ASSISTED_TRAMMING_WIZARD // Make the menu item open a Tramming Wizard sub-menu /** * Screw thread: diff --git a/config/examples/ADIMLab/Gantry v2/Configuration_adv.h b/config/examples/ADIMLab/Gantry v2/Configuration_adv.h index ab300f5d78..e34c5ae721 100644 --- a/config/examples/ADIMLab/Gantry v2/Configuration_adv.h +++ b/config/examples/ADIMLab/Gantry v2/Configuration_adv.h @@ -808,7 +808,9 @@ #define RESTORE_LEVELING_AFTER_G35 // Enable to restore leveling setup after operation //#define REPORT_TRAMMING_MM // Report Z deviation (mm) for each point relative to the first - //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item for Assisted Tramming + + //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item to run G35 Assisted Tramming (MarlinUI) + //#define ASSISTED_TRAMMING_WIZARD // Make the menu item open a Tramming Wizard sub-menu /** * Screw thread: diff --git a/config/examples/AlephObjects/TAZ4/Configuration_adv.h b/config/examples/AlephObjects/TAZ4/Configuration_adv.h index 7a56c57770..0adba7cc04 100644 --- a/config/examples/AlephObjects/TAZ4/Configuration_adv.h +++ b/config/examples/AlephObjects/TAZ4/Configuration_adv.h @@ -808,7 +808,9 @@ #define RESTORE_LEVELING_AFTER_G35 // Enable to restore leveling setup after operation //#define REPORT_TRAMMING_MM // Report Z deviation (mm) for each point relative to the first - //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item for Assisted Tramming + + //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item to run G35 Assisted Tramming (MarlinUI) + //#define ASSISTED_TRAMMING_WIZARD // Make the menu item open a Tramming Wizard sub-menu /** * Screw thread: diff --git a/config/examples/Alfawise/U20-bltouch/Configuration_adv.h b/config/examples/Alfawise/U20-bltouch/Configuration_adv.h index 798ff79bb3..6c85183946 100644 --- a/config/examples/Alfawise/U20-bltouch/Configuration_adv.h +++ b/config/examples/Alfawise/U20-bltouch/Configuration_adv.h @@ -809,7 +809,9 @@ #define RESTORE_LEVELING_AFTER_G35 // Enable to restore leveling setup after operation //#define REPORT_TRAMMING_MM // Report Z deviation (mm) for each point relative to the first - //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item for Assisted Tramming + + //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item to run G35 Assisted Tramming (MarlinUI) + //#define ASSISTED_TRAMMING_WIZARD // Make the menu item open a Tramming Wizard sub-menu /** * Screw thread: diff --git a/config/examples/Alfawise/U20/Configuration_adv.h b/config/examples/Alfawise/U20/Configuration_adv.h index b81c54b9ff..692ad72c3f 100644 --- a/config/examples/Alfawise/U20/Configuration_adv.h +++ b/config/examples/Alfawise/U20/Configuration_adv.h @@ -808,7 +808,9 @@ #define RESTORE_LEVELING_AFTER_G35 // Enable to restore leveling setup after operation //#define REPORT_TRAMMING_MM // Report Z deviation (mm) for each point relative to the first - //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item for Assisted Tramming + + //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item to run G35 Assisted Tramming (MarlinUI) + //#define ASSISTED_TRAMMING_WIZARD // Make the menu item open a Tramming Wizard sub-menu /** * Screw thread: diff --git a/config/examples/AliExpress/UM2pExt/Configuration_adv.h b/config/examples/AliExpress/UM2pExt/Configuration_adv.h index 567ea571a1..0c929ad652 100644 --- a/config/examples/AliExpress/UM2pExt/Configuration_adv.h +++ b/config/examples/AliExpress/UM2pExt/Configuration_adv.h @@ -808,7 +808,9 @@ #define RESTORE_LEVELING_AFTER_G35 // Enable to restore leveling setup after operation //#define REPORT_TRAMMING_MM // Report Z deviation (mm) for each point relative to the first - //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item for Assisted Tramming + + //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item to run G35 Assisted Tramming (MarlinUI) + //#define ASSISTED_TRAMMING_WIZARD // Make the menu item open a Tramming Wizard sub-menu /** * Screw thread: diff --git a/config/examples/Anet/A2/Configuration_adv.h b/config/examples/Anet/A2/Configuration_adv.h index 94f834d26e..918b5a91a3 100644 --- a/config/examples/Anet/A2/Configuration_adv.h +++ b/config/examples/Anet/A2/Configuration_adv.h @@ -808,7 +808,9 @@ #define RESTORE_LEVELING_AFTER_G35 // Enable to restore leveling setup after operation //#define REPORT_TRAMMING_MM // Report Z deviation (mm) for each point relative to the first - //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item for Assisted Tramming + + //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item to run G35 Assisted Tramming (MarlinUI) + //#define ASSISTED_TRAMMING_WIZARD // Make the menu item open a Tramming Wizard sub-menu /** * Screw thread: diff --git a/config/examples/Anet/A2plus/Configuration_adv.h b/config/examples/Anet/A2plus/Configuration_adv.h index 94f834d26e..918b5a91a3 100644 --- a/config/examples/Anet/A2plus/Configuration_adv.h +++ b/config/examples/Anet/A2plus/Configuration_adv.h @@ -808,7 +808,9 @@ #define RESTORE_LEVELING_AFTER_G35 // Enable to restore leveling setup after operation //#define REPORT_TRAMMING_MM // Report Z deviation (mm) for each point relative to the first - //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item for Assisted Tramming + + //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item to run G35 Assisted Tramming (MarlinUI) + //#define ASSISTED_TRAMMING_WIZARD // Make the menu item open a Tramming Wizard sub-menu /** * Screw thread: diff --git a/config/examples/Anet/A6/Configuration_adv.h b/config/examples/Anet/A6/Configuration_adv.h index bc0a275779..bc2115fc06 100644 --- a/config/examples/Anet/A6/Configuration_adv.h +++ b/config/examples/Anet/A6/Configuration_adv.h @@ -808,7 +808,9 @@ #define RESTORE_LEVELING_AFTER_G35 // Enable to restore leveling setup after operation //#define REPORT_TRAMMING_MM // Report Z deviation (mm) for each point relative to the first - //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item for Assisted Tramming + + //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item to run G35 Assisted Tramming (MarlinUI) + //#define ASSISTED_TRAMMING_WIZARD // Make the menu item open a Tramming Wizard sub-menu /** * Screw thread: diff --git a/config/examples/Anet/A8/Configuration_adv.h b/config/examples/Anet/A8/Configuration_adv.h index 050874c0dc..915da86ece 100644 --- a/config/examples/Anet/A8/Configuration_adv.h +++ b/config/examples/Anet/A8/Configuration_adv.h @@ -808,7 +808,9 @@ #define RESTORE_LEVELING_AFTER_G35 // Enable to restore leveling setup after operation //#define REPORT_TRAMMING_MM // Report Z deviation (mm) for each point relative to the first - //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item for Assisted Tramming + + //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item to run G35 Assisted Tramming (MarlinUI) + //#define ASSISTED_TRAMMING_WIZARD // Make the menu item open a Tramming Wizard sub-menu /** * Screw thread: diff --git a/config/examples/Anet/A8plus/Configuration_adv.h b/config/examples/Anet/A8plus/Configuration_adv.h index eafd220c79..02ba490a64 100644 --- a/config/examples/Anet/A8plus/Configuration_adv.h +++ b/config/examples/Anet/A8plus/Configuration_adv.h @@ -808,7 +808,9 @@ #define RESTORE_LEVELING_AFTER_G35 // Enable to restore leveling setup after operation //#define REPORT_TRAMMING_MM // Report Z deviation (mm) for each point relative to the first - //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item for Assisted Tramming + + //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item to run G35 Assisted Tramming (MarlinUI) + //#define ASSISTED_TRAMMING_WIZARD // Make the menu item open a Tramming Wizard sub-menu /** * Screw thread: diff --git a/config/examples/Anet/A9/Configuration_adv.h b/config/examples/Anet/A9/Configuration_adv.h index 0d65beee4c..7286c8cf0e 100644 --- a/config/examples/Anet/A9/Configuration_adv.h +++ b/config/examples/Anet/A9/Configuration_adv.h @@ -808,7 +808,9 @@ #define RESTORE_LEVELING_AFTER_G35 // Enable to restore leveling setup after operation //#define REPORT_TRAMMING_MM // Report Z deviation (mm) for each point relative to the first - //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item for Assisted Tramming + + //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item to run G35 Assisted Tramming (MarlinUI) + //#define ASSISTED_TRAMMING_WIZARD // Make the menu item open a Tramming Wizard sub-menu /** * Screw thread: diff --git a/config/examples/Anet/E10/Configuration_adv.h b/config/examples/Anet/E10/Configuration_adv.h index bfc5eff4d2..f3cec04252 100644 --- a/config/examples/Anet/E10/Configuration_adv.h +++ b/config/examples/Anet/E10/Configuration_adv.h @@ -808,7 +808,9 @@ #define RESTORE_LEVELING_AFTER_G35 // Enable to restore leveling setup after operation //#define REPORT_TRAMMING_MM // Report Z deviation (mm) for each point relative to the first - //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item for Assisted Tramming + + //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item to run G35 Assisted Tramming (MarlinUI) + //#define ASSISTED_TRAMMING_WIZARD // Make the menu item open a Tramming Wizard sub-menu /** * Screw thread: diff --git a/config/examples/Anet/E16/Configuration_adv.h b/config/examples/Anet/E16/Configuration_adv.h index 4486b91d3b..49951ad151 100644 --- a/config/examples/Anet/E16/Configuration_adv.h +++ b/config/examples/Anet/E16/Configuration_adv.h @@ -808,7 +808,9 @@ #define RESTORE_LEVELING_AFTER_G35 // Enable to restore leveling setup after operation //#define REPORT_TRAMMING_MM // Report Z deviation (mm) for each point relative to the first - //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item for Assisted Tramming + + //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item to run G35 Assisted Tramming (MarlinUI) + //#define ASSISTED_TRAMMING_WIZARD // Make the menu item open a Tramming Wizard sub-menu /** * Screw thread: diff --git a/config/examples/Anet/ET4/Configuration_adv.h b/config/examples/Anet/ET4/Configuration_adv.h index 7a17ce5fa3..1356b746f0 100644 --- a/config/examples/Anet/ET4/Configuration_adv.h +++ b/config/examples/Anet/ET4/Configuration_adv.h @@ -808,7 +808,9 @@ #define RESTORE_LEVELING_AFTER_G35 // Enable to restore leveling setup after operation //#define REPORT_TRAMMING_MM // Report Z deviation (mm) for each point relative to the first - //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item for Assisted Tramming + + //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item to run G35 Assisted Tramming (MarlinUI) + //#define ASSISTED_TRAMMING_WIZARD // Make the menu item open a Tramming Wizard sub-menu /** * Screw thread: diff --git a/config/examples/AnyCubic/Chiron/Configuration_adv.h b/config/examples/AnyCubic/Chiron/Configuration_adv.h index a48a67d37f..79b218a9ee 100644 --- a/config/examples/AnyCubic/Chiron/Configuration_adv.h +++ b/config/examples/AnyCubic/Chiron/Configuration_adv.h @@ -808,7 +808,9 @@ #define RESTORE_LEVELING_AFTER_G35 // Enable to restore leveling setup after operation //#define REPORT_TRAMMING_MM // Report Z deviation (mm) for each point relative to the first - //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item for Assisted Tramming + + //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item to run G35 Assisted Tramming (MarlinUI) + //#define ASSISTED_TRAMMING_WIZARD // Make the menu item open a Tramming Wizard sub-menu /** * Screw thread: diff --git a/config/examples/AnyCubic/Mega Zero/Anycubic V1/Configuration_adv.h b/config/examples/AnyCubic/Mega Zero/Anycubic V1/Configuration_adv.h index aed3a3c945..8efcc328b0 100644 --- a/config/examples/AnyCubic/Mega Zero/Anycubic V1/Configuration_adv.h +++ b/config/examples/AnyCubic/Mega Zero/Anycubic V1/Configuration_adv.h @@ -808,7 +808,9 @@ #define RESTORE_LEVELING_AFTER_G35 // Enable to restore leveling setup after operation //#define REPORT_TRAMMING_MM // Report Z deviation (mm) for each point relative to the first - //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item for Assisted Tramming + + //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item to run G35 Assisted Tramming (MarlinUI) + //#define ASSISTED_TRAMMING_WIZARD // Make the menu item open a Tramming Wizard sub-menu /** * Screw thread: diff --git a/config/examples/AnyCubic/Mega Zero/BigTreeTech SKR Mini MZ V1.0/Configuration_adv.h b/config/examples/AnyCubic/Mega Zero/BigTreeTech SKR Mini MZ V1.0/Configuration_adv.h index ad4b59211d..bec76cc910 100644 --- a/config/examples/AnyCubic/Mega Zero/BigTreeTech SKR Mini MZ V1.0/Configuration_adv.h +++ b/config/examples/AnyCubic/Mega Zero/BigTreeTech SKR Mini MZ V1.0/Configuration_adv.h @@ -808,7 +808,9 @@ #define RESTORE_LEVELING_AFTER_G35 // Enable to restore leveling setup after operation //#define REPORT_TRAMMING_MM // Report Z deviation (mm) for each point relative to the first - //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item for Assisted Tramming + + //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item to run G35 Assisted Tramming (MarlinUI) + //#define ASSISTED_TRAMMING_WIZARD // Make the menu item open a Tramming Wizard sub-menu /** * Screw thread: diff --git a/config/examples/AnyCubic/i3 Mega/Configuration_adv.h b/config/examples/AnyCubic/i3 Mega/Configuration_adv.h index 0fe763cb2e..0e269e7a5c 100644 --- a/config/examples/AnyCubic/i3 Mega/Configuration_adv.h +++ b/config/examples/AnyCubic/i3 Mega/Configuration_adv.h @@ -808,7 +808,9 @@ #define RESTORE_LEVELING_AFTER_G35 // Enable to restore leveling setup after operation //#define REPORT_TRAMMING_MM // Report Z deviation (mm) for each point relative to the first - //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item for Assisted Tramming + + //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item to run G35 Assisted Tramming (MarlinUI) + //#define ASSISTED_TRAMMING_WIZARD // Make the menu item open a Tramming Wizard sub-menu /** * Screw thread: diff --git a/config/examples/AnyCubic/i3/Configuration_adv.h b/config/examples/AnyCubic/i3/Configuration_adv.h index 092fff0bc4..d6a73f9c78 100644 --- a/config/examples/AnyCubic/i3/Configuration_adv.h +++ b/config/examples/AnyCubic/i3/Configuration_adv.h @@ -808,7 +808,9 @@ #define RESTORE_LEVELING_AFTER_G35 // Enable to restore leveling setup after operation //#define REPORT_TRAMMING_MM // Report Z deviation (mm) for each point relative to the first - //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item for Assisted Tramming + + //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item to run G35 Assisted Tramming (MarlinUI) + //#define ASSISTED_TRAMMING_WIZARD // Make the menu item open a Tramming Wizard sub-menu /** * Screw thread: diff --git a/config/examples/ArmEd/Configuration_adv.h b/config/examples/ArmEd/Configuration_adv.h index 9ae1867905..a5dcb64a4e 100644 --- a/config/examples/ArmEd/Configuration_adv.h +++ b/config/examples/ArmEd/Configuration_adv.h @@ -812,7 +812,9 @@ #define RESTORE_LEVELING_AFTER_G35 // Enable to restore leveling setup after operation //#define REPORT_TRAMMING_MM // Report Z deviation (mm) for each point relative to the first - //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item for Assisted Tramming + + //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item to run G35 Assisted Tramming (MarlinUI) + //#define ASSISTED_TRAMMING_WIZARD // Make the menu item open a Tramming Wizard sub-menu /** * Screw thread: diff --git a/config/examples/Artillery/Genius/Configuration_adv.h b/config/examples/Artillery/Genius/Configuration_adv.h index eb7a1627d7..59cf6d05bf 100644 --- a/config/examples/Artillery/Genius/Configuration_adv.h +++ b/config/examples/Artillery/Genius/Configuration_adv.h @@ -808,7 +808,9 @@ #define RESTORE_LEVELING_AFTER_G35 // Enable to restore leveling setup after operation //#define REPORT_TRAMMING_MM // Report Z deviation (mm) for each point relative to the first - //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item for Assisted Tramming + + //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item to run G35 Assisted Tramming (MarlinUI) + //#define ASSISTED_TRAMMING_WIZARD // Make the menu item open a Tramming Wizard sub-menu /** * Screw thread: diff --git a/config/examples/Artillery/Sidewinder X1/Configuration_adv.h b/config/examples/Artillery/Sidewinder X1/Configuration_adv.h index eb7a1627d7..59cf6d05bf 100644 --- a/config/examples/Artillery/Sidewinder X1/Configuration_adv.h +++ b/config/examples/Artillery/Sidewinder X1/Configuration_adv.h @@ -808,7 +808,9 @@ #define RESTORE_LEVELING_AFTER_G35 // Enable to restore leveling setup after operation //#define REPORT_TRAMMING_MM // Report Z deviation (mm) for each point relative to the first - //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item for Assisted Tramming + + //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item to run G35 Assisted Tramming (MarlinUI) + //#define ASSISTED_TRAMMING_WIZARD // Make the menu item open a Tramming Wizard sub-menu /** * Screw thread: diff --git a/config/examples/Artillery/Sidewinder X1_0.9_degree_BMG_E3D_V6/Configuration_adv.h b/config/examples/Artillery/Sidewinder X1_0.9_degree_BMG_E3D_V6/Configuration_adv.h index 0881c7f80f..d24e81f147 100644 --- a/config/examples/Artillery/Sidewinder X1_0.9_degree_BMG_E3D_V6/Configuration_adv.h +++ b/config/examples/Artillery/Sidewinder X1_0.9_degree_BMG_E3D_V6/Configuration_adv.h @@ -808,7 +808,9 @@ #define RESTORE_LEVELING_AFTER_G35 // Enable to restore leveling setup after operation //#define REPORT_TRAMMING_MM // Report Z deviation (mm) for each point relative to the first - //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item for Assisted Tramming + + //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item to run G35 Assisted Tramming (MarlinUI) + //#define ASSISTED_TRAMMING_WIZARD // Make the menu item open a Tramming Wizard sub-menu /** * Screw thread: diff --git a/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h b/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h index bec9ca870d..8db7c2099f 100644 --- a/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h +++ b/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h @@ -808,7 +808,9 @@ #define RESTORE_LEVELING_AFTER_G35 // Enable to restore leveling setup after operation //#define REPORT_TRAMMING_MM // Report Z deviation (mm) for each point relative to the first - //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item for Assisted Tramming + + //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item to run G35 Assisted Tramming (MarlinUI) + //#define ASSISTED_TRAMMING_WIZARD // Make the menu item open a Tramming Wizard sub-menu /** * Screw thread: diff --git a/config/examples/BIBO/TouchX/default/Configuration_adv.h b/config/examples/BIBO/TouchX/default/Configuration_adv.h index 50ce41349a..38bb035bd5 100644 --- a/config/examples/BIBO/TouchX/default/Configuration_adv.h +++ b/config/examples/BIBO/TouchX/default/Configuration_adv.h @@ -808,7 +808,9 @@ #define RESTORE_LEVELING_AFTER_G35 // Enable to restore leveling setup after operation //#define REPORT_TRAMMING_MM // Report Z deviation (mm) for each point relative to the first - //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item for Assisted Tramming + + //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item to run G35 Assisted Tramming (MarlinUI) + //#define ASSISTED_TRAMMING_WIZARD // Make the menu item open a Tramming Wizard sub-menu /** * Screw thread: diff --git a/config/examples/BIQU/B1-BLTouch/Configuration_adv.h b/config/examples/BIQU/B1-BLTouch/Configuration_adv.h index b0464d7f0f..78793b1018 100644 --- a/config/examples/BIQU/B1-BLTouch/Configuration_adv.h +++ b/config/examples/BIQU/B1-BLTouch/Configuration_adv.h @@ -808,7 +808,9 @@ #define RESTORE_LEVELING_AFTER_G35 // Enable to restore leveling setup after operation //#define REPORT_TRAMMING_MM // Report Z deviation (mm) for each point relative to the first - //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item for Assisted Tramming + + //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item to run G35 Assisted Tramming (MarlinUI) + //#define ASSISTED_TRAMMING_WIZARD // Make the menu item open a Tramming Wizard sub-menu /** * Screw thread: diff --git a/config/examples/BIQU/B1/Configuration_adv.h b/config/examples/BIQU/B1/Configuration_adv.h index 3ee21ef175..a79fda4ddb 100644 --- a/config/examples/BIQU/B1/Configuration_adv.h +++ b/config/examples/BIQU/B1/Configuration_adv.h @@ -808,7 +808,9 @@ #define RESTORE_LEVELING_AFTER_G35 // Enable to restore leveling setup after operation //#define REPORT_TRAMMING_MM // Report Z deviation (mm) for each point relative to the first - //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item for Assisted Tramming + + //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item to run G35 Assisted Tramming (MarlinUI) + //#define ASSISTED_TRAMMING_WIZARD // Make the menu item open a Tramming Wizard sub-menu /** * Screw thread: diff --git a/config/examples/BQ/Hephestos/Configuration_adv.h b/config/examples/BQ/Hephestos/Configuration_adv.h index def02a8ca2..7567ac21f1 100644 --- a/config/examples/BQ/Hephestos/Configuration_adv.h +++ b/config/examples/BQ/Hephestos/Configuration_adv.h @@ -808,7 +808,9 @@ #define RESTORE_LEVELING_AFTER_G35 // Enable to restore leveling setup after operation //#define REPORT_TRAMMING_MM // Report Z deviation (mm) for each point relative to the first - //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item for Assisted Tramming + + //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item to run G35 Assisted Tramming (MarlinUI) + //#define ASSISTED_TRAMMING_WIZARD // Make the menu item open a Tramming Wizard sub-menu /** * Screw thread: diff --git a/config/examples/BQ/Hephestos_2/Configuration_adv.h b/config/examples/BQ/Hephestos_2/Configuration_adv.h index f87a57c289..e00e24d285 100644 --- a/config/examples/BQ/Hephestos_2/Configuration_adv.h +++ b/config/examples/BQ/Hephestos_2/Configuration_adv.h @@ -808,7 +808,9 @@ #define RESTORE_LEVELING_AFTER_G35 // Enable to restore leveling setup after operation //#define REPORT_TRAMMING_MM // Report Z deviation (mm) for each point relative to the first - //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item for Assisted Tramming + + //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item to run G35 Assisted Tramming (MarlinUI) + //#define ASSISTED_TRAMMING_WIZARD // Make the menu item open a Tramming Wizard sub-menu /** * Screw thread: diff --git a/config/examples/BQ/WITBOX/Configuration_adv.h b/config/examples/BQ/WITBOX/Configuration_adv.h index def02a8ca2..7567ac21f1 100644 --- a/config/examples/BQ/WITBOX/Configuration_adv.h +++ b/config/examples/BQ/WITBOX/Configuration_adv.h @@ -808,7 +808,9 @@ #define RESTORE_LEVELING_AFTER_G35 // Enable to restore leveling setup after operation //#define REPORT_TRAMMING_MM // Report Z deviation (mm) for each point relative to the first - //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item for Assisted Tramming + + //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item to run G35 Assisted Tramming (MarlinUI) + //#define ASSISTED_TRAMMING_WIZARD // Make the menu item open a Tramming Wizard sub-menu /** * Screw thread: diff --git a/config/examples/Cartesio/Configuration_adv.h b/config/examples/Cartesio/Configuration_adv.h index 54444a6c71..40b8086389 100644 --- a/config/examples/Cartesio/Configuration_adv.h +++ b/config/examples/Cartesio/Configuration_adv.h @@ -808,7 +808,9 @@ #define RESTORE_LEVELING_AFTER_G35 // Enable to restore leveling setup after operation //#define REPORT_TRAMMING_MM // Report Z deviation (mm) for each point relative to the first - //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item for Assisted Tramming + + //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item to run G35 Assisted Tramming (MarlinUI) + //#define ASSISTED_TRAMMING_WIZARD // Make the menu item open a Tramming Wizard sub-menu /** * Screw thread: diff --git a/config/examples/Creality/CR-10 Mini/CrealityV1/Configuration_adv.h b/config/examples/Creality/CR-10 Mini/CrealityV1/Configuration_adv.h index f15c18b4d0..4e10d965c7 100644 --- a/config/examples/Creality/CR-10 Mini/CrealityV1/Configuration_adv.h +++ b/config/examples/Creality/CR-10 Mini/CrealityV1/Configuration_adv.h @@ -808,7 +808,9 @@ #define RESTORE_LEVELING_AFTER_G35 // Enable to restore leveling setup after operation //#define REPORT_TRAMMING_MM // Report Z deviation (mm) for each point relative to the first - //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item for Assisted Tramming + + //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item to run G35 Assisted Tramming (MarlinUI) + //#define ASSISTED_TRAMMING_WIZARD // Make the menu item open a Tramming Wizard sub-menu /** * Screw thread: diff --git a/config/examples/Creality/CR-10 Mini/MEEB-3DP/Configuration_adv.h b/config/examples/Creality/CR-10 Mini/MEEB-3DP/Configuration_adv.h index f549ce3545..fdd8912179 100644 --- a/config/examples/Creality/CR-10 Mini/MEEB-3DP/Configuration_adv.h +++ b/config/examples/Creality/CR-10 Mini/MEEB-3DP/Configuration_adv.h @@ -808,7 +808,9 @@ #define RESTORE_LEVELING_AFTER_G35 // Enable to restore leveling setup after operation //#define REPORT_TRAMMING_MM // Report Z deviation (mm) for each point relative to the first - //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item for Assisted Tramming + + //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item to run G35 Assisted Tramming (MarlinUI) + //#define ASSISTED_TRAMMING_WIZARD // Make the menu item open a Tramming Wizard sub-menu /** * Screw thread: diff --git a/config/examples/Creality/CR-10 S4/CrealityV1/Configuration_adv.h b/config/examples/Creality/CR-10 S4/CrealityV1/Configuration_adv.h index fcbda902a8..8865c05f54 100644 --- a/config/examples/Creality/CR-10 S4/CrealityV1/Configuration_adv.h +++ b/config/examples/Creality/CR-10 S4/CrealityV1/Configuration_adv.h @@ -808,7 +808,9 @@ #define RESTORE_LEVELING_AFTER_G35 // Enable to restore leveling setup after operation //#define REPORT_TRAMMING_MM // Report Z deviation (mm) for each point relative to the first - //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item for Assisted Tramming + + //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item to run G35 Assisted Tramming (MarlinUI) + //#define ASSISTED_TRAMMING_WIZARD // Make the menu item open a Tramming Wizard sub-menu /** * Screw thread: diff --git a/config/examples/Creality/CR-10 S5/CrealityV1/Configuration_adv.h b/config/examples/Creality/CR-10 S5/CrealityV1/Configuration_adv.h index fcbda902a8..8865c05f54 100644 --- a/config/examples/Creality/CR-10 S5/CrealityV1/Configuration_adv.h +++ b/config/examples/Creality/CR-10 S5/CrealityV1/Configuration_adv.h @@ -808,7 +808,9 @@ #define RESTORE_LEVELING_AFTER_G35 // Enable to restore leveling setup after operation //#define REPORT_TRAMMING_MM // Report Z deviation (mm) for each point relative to the first - //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item for Assisted Tramming + + //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item to run G35 Assisted Tramming (MarlinUI) + //#define ASSISTED_TRAMMING_WIZARD // Make the menu item open a Tramming Wizard sub-menu /** * Screw thread: diff --git a/config/examples/Creality/CR-10 V2/Configuration_adv.h b/config/examples/Creality/CR-10 V2/Configuration_adv.h index a9fc241f8b..98b939526b 100644 --- a/config/examples/Creality/CR-10 V2/Configuration_adv.h +++ b/config/examples/Creality/CR-10 V2/Configuration_adv.h @@ -808,7 +808,9 @@ #define RESTORE_LEVELING_AFTER_G35 // Enable to restore leveling setup after operation //#define REPORT_TRAMMING_MM // Report Z deviation (mm) for each point relative to the first - //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item for Assisted Tramming + + //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item to run G35 Assisted Tramming (MarlinUI) + //#define ASSISTED_TRAMMING_WIZARD // Make the menu item open a Tramming Wizard sub-menu /** * Screw thread: diff --git a/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h b/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h index 7e22c6774c..4219d15c16 100644 --- a/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h +++ b/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h @@ -808,7 +808,9 @@ #define RESTORE_LEVELING_AFTER_G35 // Enable to restore leveling setup after operation //#define REPORT_TRAMMING_MM // Report Z deviation (mm) for each point relative to the first - //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item for Assisted Tramming + + //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item to run G35 Assisted Tramming (MarlinUI) + //#define ASSISTED_TRAMMING_WIZARD // Make the menu item open a Tramming Wizard sub-menu /** * Screw thread: diff --git a/config/examples/Creality/CR-10/CrealityV1/Configuration_adv.h b/config/examples/Creality/CR-10/CrealityV1/Configuration_adv.h index 22015d69d1..a63b6de9a5 100644 --- a/config/examples/Creality/CR-10/CrealityV1/Configuration_adv.h +++ b/config/examples/Creality/CR-10/CrealityV1/Configuration_adv.h @@ -808,7 +808,9 @@ #define RESTORE_LEVELING_AFTER_G35 // Enable to restore leveling setup after operation //#define REPORT_TRAMMING_MM // Report Z deviation (mm) for each point relative to the first - //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item for Assisted Tramming + + //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item to run G35 Assisted Tramming (MarlinUI) + //#define ASSISTED_TRAMMING_WIZARD // Make the menu item open a Tramming Wizard sub-menu /** * Screw thread: diff --git a/config/examples/Creality/CR-10S/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h b/config/examples/Creality/CR-10S/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h index 19b3994432..c4d80c2286 100644 --- a/config/examples/Creality/CR-10S/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h +++ b/config/examples/Creality/CR-10S/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h @@ -808,7 +808,9 @@ #define RESTORE_LEVELING_AFTER_G35 // Enable to restore leveling setup after operation //#define REPORT_TRAMMING_MM // Report Z deviation (mm) for each point relative to the first - //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item for Assisted Tramming + + //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item to run G35 Assisted Tramming (MarlinUI) + //#define ASSISTED_TRAMMING_WIZARD // Make the menu item open a Tramming Wizard sub-menu /** * Screw thread: diff --git a/config/examples/Creality/CR-10S/CrealityV1/Configuration_adv.h b/config/examples/Creality/CR-10S/CrealityV1/Configuration_adv.h index 83054bc0bf..e126df7e2d 100644 --- a/config/examples/Creality/CR-10S/CrealityV1/Configuration_adv.h +++ b/config/examples/Creality/CR-10S/CrealityV1/Configuration_adv.h @@ -808,7 +808,9 @@ #define RESTORE_LEVELING_AFTER_G35 // Enable to restore leveling setup after operation //#define REPORT_TRAMMING_MM // Report Z deviation (mm) for each point relative to the first - //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item for Assisted Tramming + + //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item to run G35 Assisted Tramming (MarlinUI) + //#define ASSISTED_TRAMMING_WIZARD // Make the menu item open a Tramming Wizard sub-menu /** * Screw thread: diff --git a/config/examples/Creality/CR-20 Pro/Configuration_adv.h b/config/examples/Creality/CR-20 Pro/Configuration_adv.h index dd1fcff677..f5f3af4420 100644 --- a/config/examples/Creality/CR-20 Pro/Configuration_adv.h +++ b/config/examples/Creality/CR-20 Pro/Configuration_adv.h @@ -808,7 +808,9 @@ #define RESTORE_LEVELING_AFTER_G35 // Enable to restore leveling setup after operation //#define REPORT_TRAMMING_MM // Report Z deviation (mm) for each point relative to the first - //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item for Assisted Tramming + + //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item to run G35 Assisted Tramming (MarlinUI) + //#define ASSISTED_TRAMMING_WIZARD // Make the menu item open a Tramming Wizard sub-menu /** * Screw thread: diff --git a/config/examples/Creality/CR-20/Configuration_adv.h b/config/examples/Creality/CR-20/Configuration_adv.h index 36b04d11c9..1396625fff 100644 --- a/config/examples/Creality/CR-20/Configuration_adv.h +++ b/config/examples/Creality/CR-20/Configuration_adv.h @@ -808,7 +808,9 @@ #define RESTORE_LEVELING_AFTER_G35 // Enable to restore leveling setup after operation //#define REPORT_TRAMMING_MM // Report Z deviation (mm) for each point relative to the first - //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item for Assisted Tramming + + //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item to run G35 Assisted Tramming (MarlinUI) + //#define ASSISTED_TRAMMING_WIZARD // Make the menu item open a Tramming Wizard sub-menu /** * Screw thread: diff --git a/config/examples/Creality/CR-6 SE/Configuration_adv.h b/config/examples/Creality/CR-6 SE/Configuration_adv.h index da659017c5..b235f4ccfd 100644 --- a/config/examples/Creality/CR-6 SE/Configuration_adv.h +++ b/config/examples/Creality/CR-6 SE/Configuration_adv.h @@ -808,7 +808,9 @@ #define RESTORE_LEVELING_AFTER_G35 // Enable to restore leveling setup after operation //#define REPORT_TRAMMING_MM // Report Z deviation (mm) for each point relative to the first - //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item for Assisted Tramming + + //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item to run G35 Assisted Tramming (MarlinUI) + //#define ASSISTED_TRAMMING_WIZARD // Make the menu item open a Tramming Wizard sub-menu /** * Screw thread: diff --git a/config/examples/Creality/CR-8/Configuration_adv.h b/config/examples/Creality/CR-8/Configuration_adv.h index 36c06bf5f3..8a463c10e7 100644 --- a/config/examples/Creality/CR-8/Configuration_adv.h +++ b/config/examples/Creality/CR-8/Configuration_adv.h @@ -808,7 +808,9 @@ #define RESTORE_LEVELING_AFTER_G35 // Enable to restore leveling setup after operation //#define REPORT_TRAMMING_MM // Report Z deviation (mm) for each point relative to the first - //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item for Assisted Tramming + + //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item to run G35 Assisted Tramming (MarlinUI) + //#define ASSISTED_TRAMMING_WIZARD // Make the menu item open a Tramming Wizard sub-menu /** * Screw thread: diff --git a/config/examples/Creality/Ender-2/Configuration_adv.h b/config/examples/Creality/Ender-2/Configuration_adv.h index f5cac4f608..b00395ee09 100644 --- a/config/examples/Creality/Ender-2/Configuration_adv.h +++ b/config/examples/Creality/Ender-2/Configuration_adv.h @@ -808,7 +808,9 @@ #define RESTORE_LEVELING_AFTER_G35 // Enable to restore leveling setup after operation //#define REPORT_TRAMMING_MM // Report Z deviation (mm) for each point relative to the first - //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item for Assisted Tramming + + //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item to run G35 Assisted Tramming (MarlinUI) + //#define ASSISTED_TRAMMING_WIZARD // Make the menu item open a Tramming Wizard sub-menu /** * Screw thread: diff --git a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h index 5759bb92f7..445de059a8 100644 --- a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h @@ -808,7 +808,9 @@ #define RESTORE_LEVELING_AFTER_G35 // Enable to restore leveling setup after operation //#define REPORT_TRAMMING_MM // Report Z deviation (mm) for each point relative to the first - //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item for Assisted Tramming + + //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item to run G35 Assisted Tramming (MarlinUI) + //#define ASSISTED_TRAMMING_WIZARD // Make the menu item open a Tramming Wizard sub-menu /** * Screw thread: diff --git a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h index ddb79c66b6..5b77e4c12f 100644 --- a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h @@ -808,7 +808,9 @@ #define RESTORE_LEVELING_AFTER_G35 // Enable to restore leveling setup after operation //#define REPORT_TRAMMING_MM // Report Z deviation (mm) for each point relative to the first - //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item for Assisted Tramming + + //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item to run G35 Assisted Tramming (MarlinUI) + //#define ASSISTED_TRAMMING_WIZARD // Make the menu item open a Tramming Wizard sub-menu /** * Screw thread: diff --git a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h index 204369e0da..a6d73c5092 100644 --- a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h @@ -808,7 +808,9 @@ #define RESTORE_LEVELING_AFTER_G35 // Enable to restore leveling setup after operation //#define REPORT_TRAMMING_MM // Report Z deviation (mm) for each point relative to the first - //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item for Assisted Tramming + + //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item to run G35 Assisted Tramming (MarlinUI) + //#define ASSISTED_TRAMMING_WIZARD // Make the menu item open a Tramming Wizard sub-menu /** * Screw thread: diff --git a/config/examples/Creality/Ender-3 Pro/CrealityV1/Configuration_adv.h b/config/examples/Creality/Ender-3 Pro/CrealityV1/Configuration_adv.h index 368b713b87..bca90fdaf9 100644 --- a/config/examples/Creality/Ender-3 Pro/CrealityV1/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 Pro/CrealityV1/Configuration_adv.h @@ -808,7 +808,9 @@ #define RESTORE_LEVELING_AFTER_G35 // Enable to restore leveling setup after operation //#define REPORT_TRAMMING_MM // Report Z deviation (mm) for each point relative to the first - //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item for Assisted Tramming + + //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item to run G35 Assisted Tramming (MarlinUI) + //#define ASSISTED_TRAMMING_WIZARD // Make the menu item open a Tramming Wizard sub-menu /** * Screw thread: diff --git a/config/examples/Creality/Ender-3 Pro/CrealityV422/Configuration_adv.h b/config/examples/Creality/Ender-3 Pro/CrealityV422/Configuration_adv.h index 3f00e75b11..ca65920cc0 100644 --- a/config/examples/Creality/Ender-3 Pro/CrealityV422/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 Pro/CrealityV422/Configuration_adv.h @@ -808,7 +808,9 @@ #define RESTORE_LEVELING_AFTER_G35 // Enable to restore leveling setup after operation //#define REPORT_TRAMMING_MM // Report Z deviation (mm) for each point relative to the first - //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item for Assisted Tramming + + //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item to run G35 Assisted Tramming (MarlinUI) + //#define ASSISTED_TRAMMING_WIZARD // Make the menu item open a Tramming Wizard sub-menu /** * Screw thread: diff --git a/config/examples/Creality/Ender-3 Pro/CrealityV427/Configuration_adv.h b/config/examples/Creality/Ender-3 Pro/CrealityV427/Configuration_adv.h index 1977020f14..bffa377d90 100644 --- a/config/examples/Creality/Ender-3 Pro/CrealityV427/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 Pro/CrealityV427/Configuration_adv.h @@ -808,7 +808,9 @@ #define RESTORE_LEVELING_AFTER_G35 // Enable to restore leveling setup after operation //#define REPORT_TRAMMING_MM // Report Z deviation (mm) for each point relative to the first - //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item for Assisted Tramming + + //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item to run G35 Assisted Tramming (MarlinUI) + //#define ASSISTED_TRAMMING_WIZARD // Make the menu item open a Tramming Wizard sub-menu /** * Screw thread: diff --git a/config/examples/Creality/Ender-3 V2/Configuration_adv.h b/config/examples/Creality/Ender-3 V2/Configuration_adv.h index 1eed1e4dcd..d3852270ca 100644 --- a/config/examples/Creality/Ender-3 V2/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 V2/Configuration_adv.h @@ -808,7 +808,9 @@ #define RESTORE_LEVELING_AFTER_G35 // Enable to restore leveling setup after operation //#define REPORT_TRAMMING_MM // Report Z deviation (mm) for each point relative to the first - //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item for Assisted Tramming + + //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item to run G35 Assisted Tramming (MarlinUI) + //#define ASSISTED_TRAMMING_WIZARD // Make the menu item open a Tramming Wizard sub-menu /** * Screw thread: diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/2-into-1 Hotend/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/2-into-1 Hotend/Configuration_adv.h index 54c455068f..92cc9b07d2 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/2-into-1 Hotend/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/2-into-1 Hotend/Configuration_adv.h @@ -808,7 +808,9 @@ #define RESTORE_LEVELING_AFTER_G35 // Enable to restore leveling setup after operation //#define REPORT_TRAMMING_MM // Report Z deviation (mm) for each point relative to the first - //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item for Assisted Tramming + + //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item to run G35 Assisted Tramming (MarlinUI) + //#define ASSISTED_TRAMMING_WIZARD // Make the menu item open a Tramming Wizard sub-menu /** * Screw thread: diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Dual Z/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Dual Z/Configuration_adv.h index 0c2c36ae84..ea1ce5dd74 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Dual Z/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Dual Z/Configuration_adv.h @@ -808,7 +808,9 @@ #define RESTORE_LEVELING_AFTER_G35 // Enable to restore leveling setup after operation //#define REPORT_TRAMMING_MM // Report Z deviation (mm) for each point relative to the first - //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item for Assisted Tramming + + //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item to run G35 Assisted Tramming (MarlinUI) + //#define ASSISTED_TRAMMING_WIZARD // Make the menu item open a Tramming Wizard sub-menu /** * Screw thread: diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Single Extruder/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Single Extruder/Configuration_adv.h index 54c455068f..92cc9b07d2 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Single Extruder/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Single Extruder/Configuration_adv.h @@ -808,7 +808,9 @@ #define RESTORE_LEVELING_AFTER_G35 // Enable to restore leveling setup after operation //#define REPORT_TRAMMING_MM // Report Z deviation (mm) for each point relative to the first - //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item for Assisted Tramming + + //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item to run G35 Assisted Tramming (MarlinUI) + //#define ASSISTED_TRAMMING_WIZARD // Make the menu item open a Tramming Wizard sub-menu /** * Screw thread: diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR E3-DIP V1.1/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech SKR E3-DIP V1.1/Configuration_adv.h index f4b793b8ec..1cb5a242b5 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR E3-DIP V1.1/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR E3-DIP V1.1/Configuration_adv.h @@ -808,7 +808,9 @@ #define RESTORE_LEVELING_AFTER_G35 // Enable to restore leveling setup after operation //#define REPORT_TRAMMING_MM // Report Z deviation (mm) for each point relative to the first - //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item for Assisted Tramming + + //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item to run G35 Assisted Tramming (MarlinUI) + //#define ASSISTED_TRAMMING_WIZARD // Make the menu item open a Tramming Wizard sub-menu /** * Screw thread: diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h index 4864a04d0d..37ddef5187 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h @@ -808,7 +808,9 @@ #define RESTORE_LEVELING_AFTER_G35 // Enable to restore leveling setup after operation //#define REPORT_TRAMMING_MM // Report Z deviation (mm) for each point relative to the first - //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item for Assisted Tramming + + //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item to run G35 Assisted Tramming (MarlinUI) + //#define ASSISTED_TRAMMING_WIZARD // Make the menu item open a Tramming Wizard sub-menu /** * Screw thread: diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h index a28eb5a471..7dc53f85dd 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h @@ -808,7 +808,9 @@ #define RESTORE_LEVELING_AFTER_G35 // Enable to restore leveling setup after operation //#define REPORT_TRAMMING_MM // Report Z deviation (mm) for each point relative to the first - //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item for Assisted Tramming + + //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item to run G35 Assisted Tramming (MarlinUI) + //#define ASSISTED_TRAMMING_WIZARD // Make the menu item open a Tramming Wizard sub-menu /** * Screw thread: diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h index 6899913fdc..2bc9a3cfab 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h @@ -808,7 +808,9 @@ #define RESTORE_LEVELING_AFTER_G35 // Enable to restore leveling setup after operation //#define REPORT_TRAMMING_MM // Report Z deviation (mm) for each point relative to the first - //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item for Assisted Tramming + + //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item to run G35 Assisted Tramming (MarlinUI) + //#define ASSISTED_TRAMMING_WIZARD // Make the menu item open a Tramming Wizard sub-menu /** * Screw thread: diff --git a/config/examples/Creality/Ender-3/CrealityV1/Configuration_adv.h b/config/examples/Creality/Ender-3/CrealityV1/Configuration_adv.h index 8d698f5f3b..053e35aa34 100644 --- a/config/examples/Creality/Ender-3/CrealityV1/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/CrealityV1/Configuration_adv.h @@ -808,7 +808,9 @@ #define RESTORE_LEVELING_AFTER_G35 // Enable to restore leveling setup after operation //#define REPORT_TRAMMING_MM // Report Z deviation (mm) for each point relative to the first - //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item for Assisted Tramming + + //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item to run G35 Assisted Tramming (MarlinUI) + //#define ASSISTED_TRAMMING_WIZARD // Make the menu item open a Tramming Wizard sub-menu /** * Screw thread: diff --git a/config/examples/Creality/Ender-3/CrealityV427/Configuration_adv.h b/config/examples/Creality/Ender-3/CrealityV427/Configuration_adv.h index 28d895ce15..2acdddec94 100644 --- a/config/examples/Creality/Ender-3/CrealityV427/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/CrealityV427/Configuration_adv.h @@ -808,7 +808,9 @@ #define RESTORE_LEVELING_AFTER_G35 // Enable to restore leveling setup after operation //#define REPORT_TRAMMING_MM // Report Z deviation (mm) for each point relative to the first - //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item for Assisted Tramming + + //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item to run G35 Assisted Tramming (MarlinUI) + //#define ASSISTED_TRAMMING_WIZARD // Make the menu item open a Tramming Wizard sub-menu /** * Screw thread: diff --git a/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/BLTouch/Configuration_adv.h b/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/BLTouch/Configuration_adv.h index 7d6098181b..2682a73c70 100644 --- a/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/BLTouch/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/BLTouch/Configuration_adv.h @@ -808,7 +808,9 @@ #define RESTORE_LEVELING_AFTER_G35 // Enable to restore leveling setup after operation //#define REPORT_TRAMMING_MM // Report Z deviation (mm) for each point relative to the first - //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item for Assisted Tramming + + //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item to run G35 Assisted Tramming (MarlinUI) + //#define ASSISTED_TRAMMING_WIZARD // Make the menu item open a Tramming Wizard sub-menu /** * Screw thread: diff --git a/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/base/Configuration_adv.h b/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/base/Configuration_adv.h index 7d6098181b..2682a73c70 100644 --- a/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/base/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/base/Configuration_adv.h @@ -808,7 +808,9 @@ #define RESTORE_LEVELING_AFTER_G35 // Enable to restore leveling setup after operation //#define REPORT_TRAMMING_MM // Report Z deviation (mm) for each point relative to the first - //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item for Assisted Tramming + + //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item to run G35 Assisted Tramming (MarlinUI) + //#define ASSISTED_TRAMMING_WIZARD // Make the menu item open a Tramming Wizard sub-menu /** * Screw thread: diff --git a/config/examples/Creality/Ender-3/FYSETC Cheetah/BLTouch/Configuration_adv.h b/config/examples/Creality/Ender-3/FYSETC Cheetah/BLTouch/Configuration_adv.h index 7d6098181b..2682a73c70 100644 --- a/config/examples/Creality/Ender-3/FYSETC Cheetah/BLTouch/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/FYSETC Cheetah/BLTouch/Configuration_adv.h @@ -808,7 +808,9 @@ #define RESTORE_LEVELING_AFTER_G35 // Enable to restore leveling setup after operation //#define REPORT_TRAMMING_MM // Report Z deviation (mm) for each point relative to the first - //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item for Assisted Tramming + + //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item to run G35 Assisted Tramming (MarlinUI) + //#define ASSISTED_TRAMMING_WIZARD // Make the menu item open a Tramming Wizard sub-menu /** * Screw thread: diff --git a/config/examples/Creality/Ender-3/FYSETC Cheetah/base/Configuration_adv.h b/config/examples/Creality/Ender-3/FYSETC Cheetah/base/Configuration_adv.h index 7d6098181b..2682a73c70 100644 --- a/config/examples/Creality/Ender-3/FYSETC Cheetah/base/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/FYSETC Cheetah/base/Configuration_adv.h @@ -808,7 +808,9 @@ #define RESTORE_LEVELING_AFTER_G35 // Enable to restore leveling setup after operation //#define REPORT_TRAMMING_MM // Report Z deviation (mm) for each point relative to the first - //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item for Assisted Tramming + + //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item to run G35 Assisted Tramming (MarlinUI) + //#define ASSISTED_TRAMMING_WIZARD // Make the menu item open a Tramming Wizard sub-menu /** * Screw thread: diff --git a/config/examples/Creality/Ender-3/MEEB-3DP/Configuration_adv.h b/config/examples/Creality/Ender-3/MEEB-3DP/Configuration_adv.h index b58729dc39..f19f7579da 100644 --- a/config/examples/Creality/Ender-3/MEEB-3DP/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/MEEB-3DP/Configuration_adv.h @@ -808,7 +808,9 @@ #define RESTORE_LEVELING_AFTER_G35 // Enable to restore leveling setup after operation //#define REPORT_TRAMMING_MM // Report Z deviation (mm) for each point relative to the first - //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item for Assisted Tramming + + //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item to run G35 Assisted Tramming (MarlinUI) + //#define ASSISTED_TRAMMING_WIZARD // Make the menu item open a Tramming Wizard sub-menu /** * Screw thread: diff --git a/config/examples/Creality/Ender-3/MKS Robin E3 1.0/Configuration_adv.h b/config/examples/Creality/Ender-3/MKS Robin E3 1.0/Configuration_adv.h index 95f6088777..e35db2037e 100644 --- a/config/examples/Creality/Ender-3/MKS Robin E3 1.0/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/MKS Robin E3 1.0/Configuration_adv.h @@ -808,7 +808,9 @@ #define RESTORE_LEVELING_AFTER_G35 // Enable to restore leveling setup after operation //#define REPORT_TRAMMING_MM // Report Z deviation (mm) for each point relative to the first - //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item for Assisted Tramming + + //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item to run G35 Assisted Tramming (MarlinUI) + //#define ASSISTED_TRAMMING_WIZARD // Make the menu item open a Tramming Wizard sub-menu /** * Screw thread: diff --git a/config/examples/Creality/Ender-4/Configuration_adv.h b/config/examples/Creality/Ender-4/Configuration_adv.h index d44025da37..df513172c9 100644 --- a/config/examples/Creality/Ender-4/Configuration_adv.h +++ b/config/examples/Creality/Ender-4/Configuration_adv.h @@ -808,7 +808,9 @@ #define RESTORE_LEVELING_AFTER_G35 // Enable to restore leveling setup after operation //#define REPORT_TRAMMING_MM // Report Z deviation (mm) for each point relative to the first - //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item for Assisted Tramming + + //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item to run G35 Assisted Tramming (MarlinUI) + //#define ASSISTED_TRAMMING_WIZARD // Make the menu item open a Tramming Wizard sub-menu /** * Screw thread: diff --git a/config/examples/Creality/Ender-5 Plus/Configuration_adv.h b/config/examples/Creality/Ender-5 Plus/Configuration_adv.h index fddf12931b..81f2f1677d 100644 --- a/config/examples/Creality/Ender-5 Plus/Configuration_adv.h +++ b/config/examples/Creality/Ender-5 Plus/Configuration_adv.h @@ -808,7 +808,9 @@ #define RESTORE_LEVELING_AFTER_G35 // Enable to restore leveling setup after operation //#define REPORT_TRAMMING_MM // Report Z deviation (mm) for each point relative to the first - //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item for Assisted Tramming + + //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item to run G35 Assisted Tramming (MarlinUI) + //#define ASSISTED_TRAMMING_WIZARD // Make the menu item open a Tramming Wizard sub-menu /** * Screw thread: diff --git a/config/examples/Creality/Ender-5 Pro/CrealityV1/Configuration_adv.h b/config/examples/Creality/Ender-5 Pro/CrealityV1/Configuration_adv.h index ea668e76a3..7392cbb93e 100644 --- a/config/examples/Creality/Ender-5 Pro/CrealityV1/Configuration_adv.h +++ b/config/examples/Creality/Ender-5 Pro/CrealityV1/Configuration_adv.h @@ -808,7 +808,9 @@ #define RESTORE_LEVELING_AFTER_G35 // Enable to restore leveling setup after operation //#define REPORT_TRAMMING_MM // Report Z deviation (mm) for each point relative to the first - //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item for Assisted Tramming + + //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item to run G35 Assisted Tramming (MarlinUI) + //#define ASSISTED_TRAMMING_WIZARD // Make the menu item open a Tramming Wizard sub-menu /** * Screw thread: diff --git a/config/examples/Creality/Ender-5 Pro/CrealityV422/Configuration_adv.h b/config/examples/Creality/Ender-5 Pro/CrealityV422/Configuration_adv.h index 84a03da19f..d61c87062e 100644 --- a/config/examples/Creality/Ender-5 Pro/CrealityV422/Configuration_adv.h +++ b/config/examples/Creality/Ender-5 Pro/CrealityV422/Configuration_adv.h @@ -808,7 +808,9 @@ #define RESTORE_LEVELING_AFTER_G35 // Enable to restore leveling setup after operation //#define REPORT_TRAMMING_MM // Report Z deviation (mm) for each point relative to the first - //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item for Assisted Tramming + + //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item to run G35 Assisted Tramming (MarlinUI) + //#define ASSISTED_TRAMMING_WIZARD // Make the menu item open a Tramming Wizard sub-menu /** * Screw thread: diff --git a/config/examples/Creality/Ender-5 Pro/CrealityV427/Configuration_adv.h b/config/examples/Creality/Ender-5 Pro/CrealityV427/Configuration_adv.h index ea668e76a3..7392cbb93e 100644 --- a/config/examples/Creality/Ender-5 Pro/CrealityV427/Configuration_adv.h +++ b/config/examples/Creality/Ender-5 Pro/CrealityV427/Configuration_adv.h @@ -808,7 +808,9 @@ #define RESTORE_LEVELING_AFTER_G35 // Enable to restore leveling setup after operation //#define REPORT_TRAMMING_MM // Report Z deviation (mm) for each point relative to the first - //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item for Assisted Tramming + + //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item to run G35 Assisted Tramming (MarlinUI) + //#define ASSISTED_TRAMMING_WIZARD // Make the menu item open a Tramming Wizard sub-menu /** * Screw thread: diff --git a/config/examples/Creality/Ender-5/BigTreeTech SKR 1.4 Turbo (TMC2209)/Configuration_adv.h b/config/examples/Creality/Ender-5/BigTreeTech SKR 1.4 Turbo (TMC2209)/Configuration_adv.h index 727a418912..276f4b5047 100644 --- a/config/examples/Creality/Ender-5/BigTreeTech SKR 1.4 Turbo (TMC2209)/Configuration_adv.h +++ b/config/examples/Creality/Ender-5/BigTreeTech SKR 1.4 Turbo (TMC2209)/Configuration_adv.h @@ -812,7 +812,9 @@ #define RESTORE_LEVELING_AFTER_G35 // Enable to restore leveling setup after operation //#define REPORT_TRAMMING_MM // Report Z deviation (mm) for each point relative to the first - //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item for Assisted Tramming + + //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item to run G35 Assisted Tramming (MarlinUI) + //#define ASSISTED_TRAMMING_WIZARD // Make the menu item open a Tramming Wizard sub-menu /** * Screw thread: diff --git a/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h b/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h index d469a3bd8e..af0dd24751 100644 --- a/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h +++ b/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h @@ -808,7 +808,9 @@ #define RESTORE_LEVELING_AFTER_G35 // Enable to restore leveling setup after operation //#define REPORT_TRAMMING_MM // Report Z deviation (mm) for each point relative to the first - //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item for Assisted Tramming + + //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item to run G35 Assisted Tramming (MarlinUI) + //#define ASSISTED_TRAMMING_WIZARD // Make the menu item open a Tramming Wizard sub-menu /** * Screw thread: diff --git a/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h b/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h index 24834c7070..5d79f9578b 100644 --- a/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h +++ b/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h @@ -808,7 +808,9 @@ #define RESTORE_LEVELING_AFTER_G35 // Enable to restore leveling setup after operation //#define REPORT_TRAMMING_MM // Report Z deviation (mm) for each point relative to the first - //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item for Assisted Tramming + + //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item to run G35 Assisted Tramming (MarlinUI) + //#define ASSISTED_TRAMMING_WIZARD // Make the menu item open a Tramming Wizard sub-menu /** * Screw thread: diff --git a/config/examples/Creality/Ender-5/CrealityV1/Configuration_adv.h b/config/examples/Creality/Ender-5/CrealityV1/Configuration_adv.h index 6b2ed7eade..3ee2d1dfb3 100644 --- a/config/examples/Creality/Ender-5/CrealityV1/Configuration_adv.h +++ b/config/examples/Creality/Ender-5/CrealityV1/Configuration_adv.h @@ -808,7 +808,9 @@ #define RESTORE_LEVELING_AFTER_G35 // Enable to restore leveling setup after operation //#define REPORT_TRAMMING_MM // Report Z deviation (mm) for each point relative to the first - //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item for Assisted Tramming + + //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item to run G35 Assisted Tramming (MarlinUI) + //#define ASSISTED_TRAMMING_WIZARD // Make the menu item open a Tramming Wizard sub-menu /** * Screw thread: diff --git a/config/examples/Creality/Ender-5/CrealityV427/Configuration_adv.h b/config/examples/Creality/Ender-5/CrealityV427/Configuration_adv.h index 6b2ed7eade..3ee2d1dfb3 100644 --- a/config/examples/Creality/Ender-5/CrealityV427/Configuration_adv.h +++ b/config/examples/Creality/Ender-5/CrealityV427/Configuration_adv.h @@ -808,7 +808,9 @@ #define RESTORE_LEVELING_AFTER_G35 // Enable to restore leveling setup after operation //#define REPORT_TRAMMING_MM // Report Z deviation (mm) for each point relative to the first - //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item for Assisted Tramming + + //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item to run G35 Assisted Tramming (MarlinUI) + //#define ASSISTED_TRAMMING_WIZARD // Make the menu item open a Tramming Wizard sub-menu /** * Screw thread: diff --git a/config/examples/Dagoma/Disco Ultimate/Configuration_adv.h b/config/examples/Dagoma/Disco Ultimate/Configuration_adv.h index 354b7126fd..905e01295d 100644 --- a/config/examples/Dagoma/Disco Ultimate/Configuration_adv.h +++ b/config/examples/Dagoma/Disco Ultimate/Configuration_adv.h @@ -808,7 +808,9 @@ #define RESTORE_LEVELING_AFTER_G35 // Enable to restore leveling setup after operation //#define REPORT_TRAMMING_MM // Report Z deviation (mm) for each point relative to the first - //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item for Assisted Tramming + + //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item to run G35 Assisted Tramming (MarlinUI) + //#define ASSISTED_TRAMMING_WIZARD // Make the menu item open a Tramming Wizard sub-menu /** * Screw thread: diff --git a/config/examples/Daycom/3DP-100/Configuration_adv.h b/config/examples/Daycom/3DP-100/Configuration_adv.h index 1219c891e1..9895578815 100644 --- a/config/examples/Daycom/3DP-100/Configuration_adv.h +++ b/config/examples/Daycom/3DP-100/Configuration_adv.h @@ -808,7 +808,9 @@ #define RESTORE_LEVELING_AFTER_G35 // Enable to restore leveling setup after operation //#define REPORT_TRAMMING_MM // Report Z deviation (mm) for each point relative to the first - //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item for Assisted Tramming + + //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item to run G35 Assisted Tramming (MarlinUI) + //#define ASSISTED_TRAMMING_WIZARD // Make the menu item open a Tramming Wizard sub-menu /** * Screw thread: diff --git a/config/examples/EXP3D/Imprimante multifonction/Configuration_adv.h b/config/examples/EXP3D/Imprimante multifonction/Configuration_adv.h index d8f0832cc5..a04a8b8422 100644 --- a/config/examples/EXP3D/Imprimante multifonction/Configuration_adv.h +++ b/config/examples/EXP3D/Imprimante multifonction/Configuration_adv.h @@ -808,7 +808,9 @@ #define RESTORE_LEVELING_AFTER_G35 // Enable to restore leveling setup after operation //#define REPORT_TRAMMING_MM // Report Z deviation (mm) for each point relative to the first - //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item for Assisted Tramming + + //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item to run G35 Assisted Tramming (MarlinUI) + //#define ASSISTED_TRAMMING_WIZARD // Make the menu item open a Tramming Wizard sub-menu /** * Screw thread: diff --git a/config/examples/Einstart-S/Configuration_adv.h b/config/examples/Einstart-S/Configuration_adv.h index 0a8328f798..8311fbc520 100644 --- a/config/examples/Einstart-S/Configuration_adv.h +++ b/config/examples/Einstart-S/Configuration_adv.h @@ -808,7 +808,9 @@ #define RESTORE_LEVELING_AFTER_G35 // Enable to restore leveling setup after operation //#define REPORT_TRAMMING_MM // Report Z deviation (mm) for each point relative to the first - //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item for Assisted Tramming + + //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item to run G35 Assisted Tramming (MarlinUI) + //#define ASSISTED_TRAMMING_WIZARD // Make the menu item open a Tramming Wizard sub-menu /** * Screw thread: diff --git a/config/examples/FYSETC/AIO_II/Configuration_adv.h b/config/examples/FYSETC/AIO_II/Configuration_adv.h index 318a317b02..92e649ab9d 100644 --- a/config/examples/FYSETC/AIO_II/Configuration_adv.h +++ b/config/examples/FYSETC/AIO_II/Configuration_adv.h @@ -808,7 +808,9 @@ #define RESTORE_LEVELING_AFTER_G35 // Enable to restore leveling setup after operation //#define REPORT_TRAMMING_MM // Report Z deviation (mm) for each point relative to the first - //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item for Assisted Tramming + + //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item to run G35 Assisted Tramming (MarlinUI) + //#define ASSISTED_TRAMMING_WIZARD // Make the menu item open a Tramming Wizard sub-menu /** * Screw thread: diff --git a/config/examples/FYSETC/F6_13/Configuration_adv.h b/config/examples/FYSETC/F6_13/Configuration_adv.h index 968e166c7b..36a5e858e9 100644 --- a/config/examples/FYSETC/F6_13/Configuration_adv.h +++ b/config/examples/FYSETC/F6_13/Configuration_adv.h @@ -808,7 +808,9 @@ #define RESTORE_LEVELING_AFTER_G35 // Enable to restore leveling setup after operation //#define REPORT_TRAMMING_MM // Report Z deviation (mm) for each point relative to the first - //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item for Assisted Tramming + + //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item to run G35 Assisted Tramming (MarlinUI) + //#define ASSISTED_TRAMMING_WIZARD // Make the menu item open a Tramming Wizard sub-menu /** * Screw thread: diff --git a/config/examples/FYSETC/S6/Configuration_adv.h b/config/examples/FYSETC/S6/Configuration_adv.h index df74740715..6db07aa682 100644 --- a/config/examples/FYSETC/S6/Configuration_adv.h +++ b/config/examples/FYSETC/S6/Configuration_adv.h @@ -808,7 +808,9 @@ #define RESTORE_LEVELING_AFTER_G35 // Enable to restore leveling setup after operation //#define REPORT_TRAMMING_MM // Report Z deviation (mm) for each point relative to the first - //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item for Assisted Tramming + + //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item to run G35 Assisted Tramming (MarlinUI) + //#define ASSISTED_TRAMMING_WIZARD // Make the menu item open a Tramming Wizard sub-menu /** * Screw thread: diff --git a/config/examples/Felix/DUAL/Configuration_adv.h b/config/examples/Felix/DUAL/Configuration_adv.h index 16572a2b34..977e1ad6d8 100644 --- a/config/examples/Felix/DUAL/Configuration_adv.h +++ b/config/examples/Felix/DUAL/Configuration_adv.h @@ -808,7 +808,9 @@ #define RESTORE_LEVELING_AFTER_G35 // Enable to restore leveling setup after operation //#define REPORT_TRAMMING_MM // Report Z deviation (mm) for each point relative to the first - //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item for Assisted Tramming + + //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item to run G35 Assisted Tramming (MarlinUI) + //#define ASSISTED_TRAMMING_WIZARD // Make the menu item open a Tramming Wizard sub-menu /** * Screw thread: diff --git a/config/examples/Felix/Single/Configuration_adv.h b/config/examples/Felix/Single/Configuration_adv.h index 16572a2b34..977e1ad6d8 100644 --- a/config/examples/Felix/Single/Configuration_adv.h +++ b/config/examples/Felix/Single/Configuration_adv.h @@ -808,7 +808,9 @@ #define RESTORE_LEVELING_AFTER_G35 // Enable to restore leveling setup after operation //#define REPORT_TRAMMING_MM // Report Z deviation (mm) for each point relative to the first - //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item for Assisted Tramming + + //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item to run G35 Assisted Tramming (MarlinUI) + //#define ASSISTED_TRAMMING_WIZARD // Make the menu item open a Tramming Wizard sub-menu /** * Screw thread: diff --git a/config/examples/FlashForge/Creator 2X/Configuration_adv.h b/config/examples/FlashForge/Creator 2X/Configuration_adv.h index a245b97bba..d4243c3a06 100644 --- a/config/examples/FlashForge/Creator 2X/Configuration_adv.h +++ b/config/examples/FlashForge/Creator 2X/Configuration_adv.h @@ -808,7 +808,9 @@ #define RESTORE_LEVELING_AFTER_G35 // Enable to restore leveling setup after operation //#define REPORT_TRAMMING_MM // Report Z deviation (mm) for each point relative to the first - //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item for Assisted Tramming + + //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item to run G35 Assisted Tramming (MarlinUI) + //#define ASSISTED_TRAMMING_WIZARD // Make the menu item open a Tramming Wizard sub-menu /** * Screw thread: diff --git a/config/examples/FlashForge/CreatorPro/Configuration_adv.h b/config/examples/FlashForge/CreatorPro/Configuration_adv.h index 1ec8235597..8124518a7f 100644 --- a/config/examples/FlashForge/CreatorPro/Configuration_adv.h +++ b/config/examples/FlashForge/CreatorPro/Configuration_adv.h @@ -808,7 +808,9 @@ #define RESTORE_LEVELING_AFTER_G35 // Enable to restore leveling setup after operation //#define REPORT_TRAMMING_MM // Report Z deviation (mm) for each point relative to the first - //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item for Assisted Tramming + + //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item to run G35 Assisted Tramming (MarlinUI) + //#define ASSISTED_TRAMMING_WIZARD // Make the menu item open a Tramming Wizard sub-menu /** * Screw thread: diff --git a/config/examples/FlyingBear/P905H/Configuration_adv.h b/config/examples/FlyingBear/P905H/Configuration_adv.h index f353acfb2d..84f3acfbb4 100644 --- a/config/examples/FlyingBear/P905H/Configuration_adv.h +++ b/config/examples/FlyingBear/P905H/Configuration_adv.h @@ -808,7 +808,9 @@ #define RESTORE_LEVELING_AFTER_G35 // Enable to restore leveling setup after operation //#define REPORT_TRAMMING_MM // Report Z deviation (mm) for each point relative to the first - //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item for Assisted Tramming + + //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item to run G35 Assisted Tramming (MarlinUI) + //#define ASSISTED_TRAMMING_WIZARD // Make the menu item open a Tramming Wizard sub-menu /** * Screw thread: diff --git a/config/examples/FolgerTech/i3-2020/Configuration_adv.h b/config/examples/FolgerTech/i3-2020/Configuration_adv.h index c1366a484e..cb86b3a5e2 100644 --- a/config/examples/FolgerTech/i3-2020/Configuration_adv.h +++ b/config/examples/FolgerTech/i3-2020/Configuration_adv.h @@ -808,7 +808,9 @@ #define RESTORE_LEVELING_AFTER_G35 // Enable to restore leveling setup after operation //#define REPORT_TRAMMING_MM // Report Z deviation (mm) for each point relative to the first - //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item for Assisted Tramming + + //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item to run G35 Assisted Tramming (MarlinUI) + //#define ASSISTED_TRAMMING_WIZARD // Make the menu item open a Tramming Wizard sub-menu /** * Screw thread: diff --git a/config/examples/Formbot/Raptor/Configuration_adv.h b/config/examples/Formbot/Raptor/Configuration_adv.h index fdfbe57def..de0379247e 100644 --- a/config/examples/Formbot/Raptor/Configuration_adv.h +++ b/config/examples/Formbot/Raptor/Configuration_adv.h @@ -808,7 +808,9 @@ #define RESTORE_LEVELING_AFTER_G35 // Enable to restore leveling setup after operation //#define REPORT_TRAMMING_MM // Report Z deviation (mm) for each point relative to the first - //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item for Assisted Tramming + + //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item to run G35 Assisted Tramming (MarlinUI) + //#define ASSISTED_TRAMMING_WIZARD // Make the menu item open a Tramming Wizard sub-menu /** * Screw thread: diff --git a/config/examples/Formbot/T_Rex_2+/Configuration_adv.h b/config/examples/Formbot/T_Rex_2+/Configuration_adv.h index 9c817eaf0d..9cb15ae6b8 100644 --- a/config/examples/Formbot/T_Rex_2+/Configuration_adv.h +++ b/config/examples/Formbot/T_Rex_2+/Configuration_adv.h @@ -809,7 +809,9 @@ #define RESTORE_LEVELING_AFTER_G35 // Enable to restore leveling setup after operation //#define REPORT_TRAMMING_MM // Report Z deviation (mm) for each point relative to the first - //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item for Assisted Tramming + + //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item to run G35 Assisted Tramming (MarlinUI) + //#define ASSISTED_TRAMMING_WIZARD // Make the menu item open a Tramming Wizard sub-menu /** * Screw thread: diff --git a/config/examples/Formbot/T_Rex_3/Configuration_adv.h b/config/examples/Formbot/T_Rex_3/Configuration_adv.h index d541590a0a..79f4f55714 100644 --- a/config/examples/Formbot/T_Rex_3/Configuration_adv.h +++ b/config/examples/Formbot/T_Rex_3/Configuration_adv.h @@ -813,7 +813,9 @@ #define RESTORE_LEVELING_AFTER_G35 // Enable to restore leveling setup after operation //#define REPORT_TRAMMING_MM // Report Z deviation (mm) for each point relative to the first - //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item for Assisted Tramming + + //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item to run G35 Assisted Tramming (MarlinUI) + //#define ASSISTED_TRAMMING_WIZARD // Make the menu item open a Tramming Wizard sub-menu /** * Screw thread: diff --git a/config/examples/Geeetech/A10/Configuration_adv.h b/config/examples/Geeetech/A10/Configuration_adv.h index ddeccc6749..e6cfca6f63 100644 --- a/config/examples/Geeetech/A10/Configuration_adv.h +++ b/config/examples/Geeetech/A10/Configuration_adv.h @@ -808,7 +808,9 @@ #define RESTORE_LEVELING_AFTER_G35 // Enable to restore leveling setup after operation //#define REPORT_TRAMMING_MM // Report Z deviation (mm) for each point relative to the first - //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item for Assisted Tramming + + //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item to run G35 Assisted Tramming (MarlinUI) + //#define ASSISTED_TRAMMING_WIZARD // Make the menu item open a Tramming Wizard sub-menu /** * Screw thread: diff --git a/config/examples/Geeetech/A10D/Configuration_adv.h b/config/examples/Geeetech/A10D/Configuration_adv.h index f241294aa6..4138d94bee 100644 --- a/config/examples/Geeetech/A10D/Configuration_adv.h +++ b/config/examples/Geeetech/A10D/Configuration_adv.h @@ -808,7 +808,9 @@ #define RESTORE_LEVELING_AFTER_G35 // Enable to restore leveling setup after operation //#define REPORT_TRAMMING_MM // Report Z deviation (mm) for each point relative to the first - //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item for Assisted Tramming + + //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item to run G35 Assisted Tramming (MarlinUI) + //#define ASSISTED_TRAMMING_WIZARD // Make the menu item open a Tramming Wizard sub-menu /** * Screw thread: diff --git a/config/examples/Geeetech/A10M/Configuration_adv.h b/config/examples/Geeetech/A10M/Configuration_adv.h index 309750514e..45295e0e4a 100644 --- a/config/examples/Geeetech/A10M/Configuration_adv.h +++ b/config/examples/Geeetech/A10M/Configuration_adv.h @@ -808,7 +808,9 @@ #define RESTORE_LEVELING_AFTER_G35 // Enable to restore leveling setup after operation //#define REPORT_TRAMMING_MM // Report Z deviation (mm) for each point relative to the first - //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item for Assisted Tramming + + //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item to run G35 Assisted Tramming (MarlinUI) + //#define ASSISTED_TRAMMING_WIZARD // Make the menu item open a Tramming Wizard sub-menu /** * Screw thread: diff --git a/config/examples/Geeetech/A10T/Configuration_adv.h b/config/examples/Geeetech/A10T/Configuration_adv.h index 309750514e..45295e0e4a 100644 --- a/config/examples/Geeetech/A10T/Configuration_adv.h +++ b/config/examples/Geeetech/A10T/Configuration_adv.h @@ -808,7 +808,9 @@ #define RESTORE_LEVELING_AFTER_G35 // Enable to restore leveling setup after operation //#define REPORT_TRAMMING_MM // Report Z deviation (mm) for each point relative to the first - //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item for Assisted Tramming + + //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item to run G35 Assisted Tramming (MarlinUI) + //#define ASSISTED_TRAMMING_WIZARD // Make the menu item open a Tramming Wizard sub-menu /** * Screw thread: diff --git a/config/examples/Geeetech/A20/Configuration_adv.h b/config/examples/Geeetech/A20/Configuration_adv.h index de092816d3..cc8785cc82 100644 --- a/config/examples/Geeetech/A20/Configuration_adv.h +++ b/config/examples/Geeetech/A20/Configuration_adv.h @@ -808,7 +808,9 @@ #define RESTORE_LEVELING_AFTER_G35 // Enable to restore leveling setup after operation //#define REPORT_TRAMMING_MM // Report Z deviation (mm) for each point relative to the first - //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item for Assisted Tramming + + //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item to run G35 Assisted Tramming (MarlinUI) + //#define ASSISTED_TRAMMING_WIZARD // Make the menu item open a Tramming Wizard sub-menu /** * Screw thread: diff --git a/config/examples/Geeetech/A20M/Configuration_adv.h b/config/examples/Geeetech/A20M/Configuration_adv.h index de092816d3..cc8785cc82 100644 --- a/config/examples/Geeetech/A20M/Configuration_adv.h +++ b/config/examples/Geeetech/A20M/Configuration_adv.h @@ -808,7 +808,9 @@ #define RESTORE_LEVELING_AFTER_G35 // Enable to restore leveling setup after operation //#define REPORT_TRAMMING_MM // Report Z deviation (mm) for each point relative to the first - //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item for Assisted Tramming + + //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item to run G35 Assisted Tramming (MarlinUI) + //#define ASSISTED_TRAMMING_WIZARD // Make the menu item open a Tramming Wizard sub-menu /** * Screw thread: diff --git a/config/examples/Geeetech/A20T/Configuration_adv.h b/config/examples/Geeetech/A20T/Configuration_adv.h index de092816d3..cc8785cc82 100644 --- a/config/examples/Geeetech/A20T/Configuration_adv.h +++ b/config/examples/Geeetech/A20T/Configuration_adv.h @@ -808,7 +808,9 @@ #define RESTORE_LEVELING_AFTER_G35 // Enable to restore leveling setup after operation //#define REPORT_TRAMMING_MM // Report Z deviation (mm) for each point relative to the first - //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item for Assisted Tramming + + //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item to run G35 Assisted Tramming (MarlinUI) + //#define ASSISTED_TRAMMING_WIZARD // Make the menu item open a Tramming Wizard sub-menu /** * Screw thread: diff --git a/config/examples/Geeetech/A30/Configuration_adv.h b/config/examples/Geeetech/A30/Configuration_adv.h index 994f4de8b3..8985c2fce3 100644 --- a/config/examples/Geeetech/A30/Configuration_adv.h +++ b/config/examples/Geeetech/A30/Configuration_adv.h @@ -808,7 +808,9 @@ #define RESTORE_LEVELING_AFTER_G35 // Enable to restore leveling setup after operation //#define REPORT_TRAMMING_MM // Report Z deviation (mm) for each point relative to the first - //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item for Assisted Tramming + + //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item to run G35 Assisted Tramming (MarlinUI) + //#define ASSISTED_TRAMMING_WIZARD // Make the menu item open a Tramming Wizard sub-menu /** * Screw thread: diff --git a/config/examples/Geeetech/D200/Configuration_adv.h b/config/examples/Geeetech/D200/Configuration_adv.h index 94e96e47e0..38df7e5fd5 100644 --- a/config/examples/Geeetech/D200/Configuration_adv.h +++ b/config/examples/Geeetech/D200/Configuration_adv.h @@ -808,7 +808,9 @@ #define RESTORE_LEVELING_AFTER_G35 // Enable to restore leveling setup after operation //#define REPORT_TRAMMING_MM // Report Z deviation (mm) for each point relative to the first - //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item for Assisted Tramming + + //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item to run G35 Assisted Tramming (MarlinUI) + //#define ASSISTED_TRAMMING_WIZARD // Make the menu item open a Tramming Wizard sub-menu /** * Screw thread: diff --git a/config/examples/Geeetech/Duplicator5/Configuration_adv.h b/config/examples/Geeetech/Duplicator5/Configuration_adv.h index df74740715..6db07aa682 100644 --- a/config/examples/Geeetech/Duplicator5/Configuration_adv.h +++ b/config/examples/Geeetech/Duplicator5/Configuration_adv.h @@ -808,7 +808,9 @@ #define RESTORE_LEVELING_AFTER_G35 // Enable to restore leveling setup after operation //#define REPORT_TRAMMING_MM // Report Z deviation (mm) for each point relative to the first - //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item for Assisted Tramming + + //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item to run G35 Assisted Tramming (MarlinUI) + //#define ASSISTED_TRAMMING_WIZARD // Make the menu item open a Tramming Wizard sub-menu /** * Screw thread: diff --git a/config/examples/Geeetech/E180/Configuration_adv.h b/config/examples/Geeetech/E180/Configuration_adv.h index 994f4de8b3..8985c2fce3 100644 --- a/config/examples/Geeetech/E180/Configuration_adv.h +++ b/config/examples/Geeetech/E180/Configuration_adv.h @@ -808,7 +808,9 @@ #define RESTORE_LEVELING_AFTER_G35 // Enable to restore leveling setup after operation //#define REPORT_TRAMMING_MM // Report Z deviation (mm) for each point relative to the first - //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item for Assisted Tramming + + //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item to run G35 Assisted Tramming (MarlinUI) + //#define ASSISTED_TRAMMING_WIZARD // Make the menu item open a Tramming Wizard sub-menu /** * Screw thread: diff --git a/config/examples/Geeetech/M201/Configuration_adv.h b/config/examples/Geeetech/M201/Configuration_adv.h index 94e96e47e0..38df7e5fd5 100644 --- a/config/examples/Geeetech/M201/Configuration_adv.h +++ b/config/examples/Geeetech/M201/Configuration_adv.h @@ -808,7 +808,9 @@ #define RESTORE_LEVELING_AFTER_G35 // Enable to restore leveling setup after operation //#define REPORT_TRAMMING_MM // Report Z deviation (mm) for each point relative to the first - //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item for Assisted Tramming + + //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item to run G35 Assisted Tramming (MarlinUI) + //#define ASSISTED_TRAMMING_WIZARD // Make the menu item open a Tramming Wizard sub-menu /** * Screw thread: diff --git a/config/examples/Geeetech/MeCreator2/Configuration_adv.h b/config/examples/Geeetech/MeCreator2/Configuration_adv.h index 1ea67d8772..59c9560676 100644 --- a/config/examples/Geeetech/MeCreator2/Configuration_adv.h +++ b/config/examples/Geeetech/MeCreator2/Configuration_adv.h @@ -808,7 +808,9 @@ #define RESTORE_LEVELING_AFTER_G35 // Enable to restore leveling setup after operation //#define REPORT_TRAMMING_MM // Report Z deviation (mm) for each point relative to the first - //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item for Assisted Tramming + + //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item to run G35 Assisted Tramming (MarlinUI) + //#define ASSISTED_TRAMMING_WIZARD // Make the menu item open a Tramming Wizard sub-menu /** * Screw thread: diff --git a/config/examples/Geeetech/Me_creator/Configuration_adv.h b/config/examples/Geeetech/Me_creator/Configuration_adv.h index df74740715..6db07aa682 100644 --- a/config/examples/Geeetech/Me_creator/Configuration_adv.h +++ b/config/examples/Geeetech/Me_creator/Configuration_adv.h @@ -808,7 +808,9 @@ #define RESTORE_LEVELING_AFTER_G35 // Enable to restore leveling setup after operation //#define REPORT_TRAMMING_MM // Report Z deviation (mm) for each point relative to the first - //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item for Assisted Tramming + + //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item to run G35 Assisted Tramming (MarlinUI) + //#define ASSISTED_TRAMMING_WIZARD // Make the menu item open a Tramming Wizard sub-menu /** * Screw thread: diff --git a/config/examples/Geeetech/Me_ducer/Configuration_adv.h b/config/examples/Geeetech/Me_ducer/Configuration_adv.h index df74740715..6db07aa682 100644 --- a/config/examples/Geeetech/Me_ducer/Configuration_adv.h +++ b/config/examples/Geeetech/Me_ducer/Configuration_adv.h @@ -808,7 +808,9 @@ #define RESTORE_LEVELING_AFTER_G35 // Enable to restore leveling setup after operation //#define REPORT_TRAMMING_MM // Report Z deviation (mm) for each point relative to the first - //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item for Assisted Tramming + + //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item to run G35 Assisted Tramming (MarlinUI) + //#define ASSISTED_TRAMMING_WIZARD // Make the menu item open a Tramming Wizard sub-menu /** * Screw thread: diff --git a/config/examples/Geeetech/PI3A PRO/Configuration_adv.h b/config/examples/Geeetech/PI3A PRO/Configuration_adv.h index b80b6fc7eb..51b81e60e6 100644 --- a/config/examples/Geeetech/PI3A PRO/Configuration_adv.h +++ b/config/examples/Geeetech/PI3A PRO/Configuration_adv.h @@ -808,7 +808,9 @@ #define RESTORE_LEVELING_AFTER_G35 // Enable to restore leveling setup after operation //#define REPORT_TRAMMING_MM // Report Z deviation (mm) for each point relative to the first - //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item for Assisted Tramming + + //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item to run G35 Assisted Tramming (MarlinUI) + //#define ASSISTED_TRAMMING_WIZARD // Make the menu item open a Tramming Wizard sub-menu /** * Screw thread: diff --git a/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h b/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h index ddeccc6749..e6cfca6f63 100644 --- a/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h +++ b/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h @@ -808,7 +808,9 @@ #define RESTORE_LEVELING_AFTER_G35 // Enable to restore leveling setup after operation //#define REPORT_TRAMMING_MM // Report Z deviation (mm) for each point relative to the first - //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item for Assisted Tramming + + //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item to run G35 Assisted Tramming (MarlinUI) + //#define ASSISTED_TRAMMING_WIZARD // Make the menu item open a Tramming Wizard sub-menu /** * Screw thread: diff --git a/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h b/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h index ddeccc6749..e6cfca6f63 100644 --- a/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h +++ b/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h @@ -808,7 +808,9 @@ #define RESTORE_LEVELING_AFTER_G35 // Enable to restore leveling setup after operation //#define REPORT_TRAMMING_MM // Report Z deviation (mm) for each point relative to the first - //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item for Assisted Tramming + + //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item to run G35 Assisted Tramming (MarlinUI) + //#define ASSISTED_TRAMMING_WIZARD // Make the menu item open a Tramming Wizard sub-menu /** * Screw thread: diff --git a/config/examples/HMS434/Configuration_adv.h b/config/examples/HMS434/Configuration_adv.h index df676c924c..1db840f751 100644 --- a/config/examples/HMS434/Configuration_adv.h +++ b/config/examples/HMS434/Configuration_adv.h @@ -799,7 +799,9 @@ #define RESTORE_LEVELING_AFTER_G35 // Enable to restore leveling setup after operation //#define REPORT_TRAMMING_MM // Report Z deviation (mm) for each point relative to the first - //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item for Assisted Tramming + + //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item to run G35 Assisted Tramming (MarlinUI) + //#define ASSISTED_TRAMMING_WIZARD // Make the menu item open a Tramming Wizard sub-menu /** * Screw thread: diff --git a/config/examples/Infitary/i3-M508/Configuration_adv.h b/config/examples/Infitary/i3-M508/Configuration_adv.h index 23e94e19e1..ace1d43399 100644 --- a/config/examples/Infitary/i3-M508/Configuration_adv.h +++ b/config/examples/Infitary/i3-M508/Configuration_adv.h @@ -808,7 +808,9 @@ #define RESTORE_LEVELING_AFTER_G35 // Enable to restore leveling setup after operation //#define REPORT_TRAMMING_MM // Report Z deviation (mm) for each point relative to the first - //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item for Assisted Tramming + + //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item to run G35 Assisted Tramming (MarlinUI) + //#define ASSISTED_TRAMMING_WIZARD // Make the menu item open a Tramming Wizard sub-menu /** * Screw thread: diff --git a/config/examples/Intamsys/FunmatHT 4988/Configuration_adv.h b/config/examples/Intamsys/FunmatHT 4988/Configuration_adv.h index 7c81ab908f..a5782ff43c 100644 --- a/config/examples/Intamsys/FunmatHT 4988/Configuration_adv.h +++ b/config/examples/Intamsys/FunmatHT 4988/Configuration_adv.h @@ -808,7 +808,9 @@ #define RESTORE_LEVELING_AFTER_G35 // Enable to restore leveling setup after operation //#define REPORT_TRAMMING_MM // Report Z deviation (mm) for each point relative to the first - //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item for Assisted Tramming + + //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item to run G35 Assisted Tramming (MarlinUI) + //#define ASSISTED_TRAMMING_WIZARD // Make the menu item open a Tramming Wizard sub-menu /** * Screw thread: diff --git a/config/examples/JGAurora/A1/Configuration_adv.h b/config/examples/JGAurora/A1/Configuration_adv.h index 4c69d1a62e..fc817f7cc8 100644 --- a/config/examples/JGAurora/A1/Configuration_adv.h +++ b/config/examples/JGAurora/A1/Configuration_adv.h @@ -813,7 +813,9 @@ #define RESTORE_LEVELING_AFTER_G35 // Enable to restore leveling setup after operation //#define REPORT_TRAMMING_MM // Report Z deviation (mm) for each point relative to the first - //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item for Assisted Tramming + + //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item to run G35 Assisted Tramming (MarlinUI) + //#define ASSISTED_TRAMMING_WIZARD // Make the menu item open a Tramming Wizard sub-menu /** * Screw thread: diff --git a/config/examples/JGAurora/A5/Configuration_adv.h b/config/examples/JGAurora/A5/Configuration_adv.h index 761601685f..c37f5c1dcb 100644 --- a/config/examples/JGAurora/A5/Configuration_adv.h +++ b/config/examples/JGAurora/A5/Configuration_adv.h @@ -808,7 +808,9 @@ #define RESTORE_LEVELING_AFTER_G35 // Enable to restore leveling setup after operation //#define REPORT_TRAMMING_MM // Report Z deviation (mm) for each point relative to the first - //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item for Assisted Tramming + + //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item to run G35 Assisted Tramming (MarlinUI) + //#define ASSISTED_TRAMMING_WIZARD // Make the menu item open a Tramming Wizard sub-menu /** * Screw thread: diff --git a/config/examples/JGAurora/A5S/Configuration_adv.h b/config/examples/JGAurora/A5S/Configuration_adv.h index 4c69d1a62e..fc817f7cc8 100644 --- a/config/examples/JGAurora/A5S/Configuration_adv.h +++ b/config/examples/JGAurora/A5S/Configuration_adv.h @@ -813,7 +813,9 @@ #define RESTORE_LEVELING_AFTER_G35 // Enable to restore leveling setup after operation //#define REPORT_TRAMMING_MM // Report Z deviation (mm) for each point relative to the first - //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item for Assisted Tramming + + //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item to run G35 Assisted Tramming (MarlinUI) + //#define ASSISTED_TRAMMING_WIZARD // Make the menu item open a Tramming Wizard sub-menu /** * Screw thread: diff --git a/config/examples/JGAurora/Magic/Configuration_adv.h b/config/examples/JGAurora/Magic/Configuration_adv.h index 62ddfa3b72..849ca28062 100644 --- a/config/examples/JGAurora/Magic/Configuration_adv.h +++ b/config/examples/JGAurora/Magic/Configuration_adv.h @@ -808,7 +808,9 @@ #define RESTORE_LEVELING_AFTER_G35 // Enable to restore leveling setup after operation //#define REPORT_TRAMMING_MM // Report Z deviation (mm) for each point relative to the first - //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item for Assisted Tramming + + //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item to run G35 Assisted Tramming (MarlinUI) + //#define ASSISTED_TRAMMING_WIZARD // Make the menu item open a Tramming Wizard sub-menu /** * Screw thread: diff --git a/config/examples/Kingroon/KP3/Configuration_adv.h b/config/examples/Kingroon/KP3/Configuration_adv.h index 490cf036da..4e16060212 100644 --- a/config/examples/Kingroon/KP3/Configuration_adv.h +++ b/config/examples/Kingroon/KP3/Configuration_adv.h @@ -808,7 +808,9 @@ #define RESTORE_LEVELING_AFTER_G35 // Enable to restore leveling setup after operation //#define REPORT_TRAMMING_MM // Report Z deviation (mm) for each point relative to the first - //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item for Assisted Tramming + + //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item to run G35 Assisted Tramming (MarlinUI) + //#define ASSISTED_TRAMMING_WIZARD // Make the menu item open a Tramming Wizard sub-menu /** * Screw thread: diff --git a/config/examples/MBot/Cube/Configuration_adv.h b/config/examples/MBot/Cube/Configuration_adv.h index 9a8b946f22..d2cbf96a31 100644 --- a/config/examples/MBot/Cube/Configuration_adv.h +++ b/config/examples/MBot/Cube/Configuration_adv.h @@ -808,7 +808,9 @@ #define RESTORE_LEVELING_AFTER_G35 // Enable to restore leveling setup after operation //#define REPORT_TRAMMING_MM // Report Z deviation (mm) for each point relative to the first - //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item for Assisted Tramming + + //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item to run G35 Assisted Tramming (MarlinUI) + //#define ASSISTED_TRAMMING_WIZARD // Make the menu item open a Tramming Wizard sub-menu /** * Screw thread: diff --git a/config/examples/MakerFarm/Pegasus 12/Configuration_adv.h b/config/examples/MakerFarm/Pegasus 12/Configuration_adv.h index 60f12839c6..5a7aca5e2c 100644 --- a/config/examples/MakerFarm/Pegasus 12/Configuration_adv.h +++ b/config/examples/MakerFarm/Pegasus 12/Configuration_adv.h @@ -808,7 +808,9 @@ #define RESTORE_LEVELING_AFTER_G35 // Enable to restore leveling setup after operation //#define REPORT_TRAMMING_MM // Report Z deviation (mm) for each point relative to the first - //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item for Assisted Tramming + + //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item to run G35 Assisted Tramming (MarlinUI) + //#define ASSISTED_TRAMMING_WIZARD // Make the menu item open a Tramming Wizard sub-menu /** * Screw thread: diff --git a/config/examples/MakerParts/Configuration_adv.h b/config/examples/MakerParts/Configuration_adv.h index e39306a813..3139b52d10 100644 --- a/config/examples/MakerParts/Configuration_adv.h +++ b/config/examples/MakerParts/Configuration_adv.h @@ -808,7 +808,9 @@ #define RESTORE_LEVELING_AFTER_G35 // Enable to restore leveling setup after operation //#define REPORT_TRAMMING_MM // Report Z deviation (mm) for each point relative to the first - //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item for Assisted Tramming + + //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item to run G35 Assisted Tramming (MarlinUI) + //#define ASSISTED_TRAMMING_WIZARD // Make the menu item open a Tramming Wizard sub-menu /** * Screw thread: diff --git a/config/examples/Malyan/M150/Configuration_adv.h b/config/examples/Malyan/M150/Configuration_adv.h index 9c1c883b81..e81b44aca9 100644 --- a/config/examples/Malyan/M150/Configuration_adv.h +++ b/config/examples/Malyan/M150/Configuration_adv.h @@ -808,7 +808,9 @@ #define RESTORE_LEVELING_AFTER_G35 // Enable to restore leveling setup after operation //#define REPORT_TRAMMING_MM // Report Z deviation (mm) for each point relative to the first - //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item for Assisted Tramming + + //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item to run G35 Assisted Tramming (MarlinUI) + //#define ASSISTED_TRAMMING_WIZARD // Make the menu item open a Tramming Wizard sub-menu /** * Screw thread: diff --git a/config/examples/Malyan/M200/Configuration_adv.h b/config/examples/Malyan/M200/Configuration_adv.h index b20bc0fc90..937b15a593 100644 --- a/config/examples/Malyan/M200/Configuration_adv.h +++ b/config/examples/Malyan/M200/Configuration_adv.h @@ -810,7 +810,9 @@ #define RESTORE_LEVELING_AFTER_G35 // Enable to restore leveling setup after operation //#define REPORT_TRAMMING_MM // Report Z deviation (mm) for each point relative to the first - //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item for Assisted Tramming + + //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item to run G35 Assisted Tramming (MarlinUI) + //#define ASSISTED_TRAMMING_WIZARD // Make the menu item open a Tramming Wizard sub-menu /** * Screw thread: diff --git a/config/examples/Micromake/C1/enhanced/Configuration_adv.h b/config/examples/Micromake/C1/enhanced/Configuration_adv.h index df0499e463..987d2931cf 100644 --- a/config/examples/Micromake/C1/enhanced/Configuration_adv.h +++ b/config/examples/Micromake/C1/enhanced/Configuration_adv.h @@ -808,7 +808,9 @@ #define RESTORE_LEVELING_AFTER_G35 // Enable to restore leveling setup after operation //#define REPORT_TRAMMING_MM // Report Z deviation (mm) for each point relative to the first - //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item for Assisted Tramming + + //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item to run G35 Assisted Tramming (MarlinUI) + //#define ASSISTED_TRAMMING_WIZARD // Make the menu item open a Tramming Wizard sub-menu /** * Screw thread: diff --git a/config/examples/Mks/Robin/Configuration_adv.h b/config/examples/Mks/Robin/Configuration_adv.h index be198b18ee..18f84ff6ec 100644 --- a/config/examples/Mks/Robin/Configuration_adv.h +++ b/config/examples/Mks/Robin/Configuration_adv.h @@ -808,7 +808,9 @@ #define RESTORE_LEVELING_AFTER_G35 // Enable to restore leveling setup after operation //#define REPORT_TRAMMING_MM // Report Z deviation (mm) for each point relative to the first - //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item for Assisted Tramming + + //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item to run G35 Assisted Tramming (MarlinUI) + //#define ASSISTED_TRAMMING_WIZARD // Make the menu item open a Tramming Wizard sub-menu /** * Screw thread: diff --git a/config/examples/Mks/Sbase/Configuration_adv.h b/config/examples/Mks/Sbase/Configuration_adv.h index 1fab50669f..9150ab2686 100644 --- a/config/examples/Mks/Sbase/Configuration_adv.h +++ b/config/examples/Mks/Sbase/Configuration_adv.h @@ -808,7 +808,9 @@ #define RESTORE_LEVELING_AFTER_G35 // Enable to restore leveling setup after operation //#define REPORT_TRAMMING_MM // Report Z deviation (mm) for each point relative to the first - //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item for Assisted Tramming + + //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item to run G35 Assisted Tramming (MarlinUI) + //#define ASSISTED_TRAMMING_WIZARD // Make the menu item open a Tramming Wizard sub-menu /** * Screw thread: diff --git a/config/examples/Modix/Big60/Configuration_adv.h b/config/examples/Modix/Big60/Configuration_adv.h index 01a54e3c90..50faa3d457 100644 --- a/config/examples/Modix/Big60/Configuration_adv.h +++ b/config/examples/Modix/Big60/Configuration_adv.h @@ -808,7 +808,9 @@ #define RESTORE_LEVELING_AFTER_G35 // Enable to restore leveling setup after operation //#define REPORT_TRAMMING_MM // Report Z deviation (mm) for each point relative to the first - //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item for Assisted Tramming + + //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item to run G35 Assisted Tramming (MarlinUI) + //#define ASSISTED_TRAMMING_WIZARD // Make the menu item open a Tramming Wizard sub-menu /** * Screw thread: diff --git a/config/examples/Ortur 4/Configuration_adv.h b/config/examples/Ortur 4/Configuration_adv.h index 6df1d185d4..b8f64c719f 100644 --- a/config/examples/Ortur 4/Configuration_adv.h +++ b/config/examples/Ortur 4/Configuration_adv.h @@ -808,7 +808,9 @@ #define RESTORE_LEVELING_AFTER_G35 // Enable to restore leveling setup after operation //#define REPORT_TRAMMING_MM // Report Z deviation (mm) for each point relative to the first - //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item for Assisted Tramming + + //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item to run G35 Assisted Tramming (MarlinUI) + //#define ASSISTED_TRAMMING_WIZARD // Make the menu item open a Tramming Wizard sub-menu /** * Screw thread: diff --git a/config/examples/Prusa/MK3S-BigTreeTech-BTT002/Configuration_adv.h b/config/examples/Prusa/MK3S-BigTreeTech-BTT002/Configuration_adv.h index eb94b58a9b..10ad5fce30 100644 --- a/config/examples/Prusa/MK3S-BigTreeTech-BTT002/Configuration_adv.h +++ b/config/examples/Prusa/MK3S-BigTreeTech-BTT002/Configuration_adv.h @@ -808,7 +808,9 @@ #define RESTORE_LEVELING_AFTER_G35 // Enable to restore leveling setup after operation //#define REPORT_TRAMMING_MM // Report Z deviation (mm) for each point relative to the first - //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item for Assisted Tramming + + //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item to run G35 Assisted Tramming (MarlinUI) + //#define ASSISTED_TRAMMING_WIZARD // Make the menu item open a Tramming Wizard sub-menu /** * Screw thread: diff --git a/config/examples/Qidi/Qidi 1/Configuration_adv.h b/config/examples/Qidi/Qidi 1/Configuration_adv.h index d3692426ae..d52553b29f 100644 --- a/config/examples/Qidi/Qidi 1/Configuration_adv.h +++ b/config/examples/Qidi/Qidi 1/Configuration_adv.h @@ -808,7 +808,9 @@ #define RESTORE_LEVELING_AFTER_G35 // Enable to restore leveling setup after operation //#define REPORT_TRAMMING_MM // Report Z deviation (mm) for each point relative to the first - //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item for Assisted Tramming + + //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item to run G35 Assisted Tramming (MarlinUI) + //#define ASSISTED_TRAMMING_WIZARD // Make the menu item open a Tramming Wizard sub-menu /** * Screw thread: diff --git a/config/examples/RapideLite/RL200/Configuration_adv.h b/config/examples/RapideLite/RL200/Configuration_adv.h index 054b70ff9a..1b7b8968fd 100644 --- a/config/examples/RapideLite/RL200/Configuration_adv.h +++ b/config/examples/RapideLite/RL200/Configuration_adv.h @@ -808,7 +808,9 @@ #define RESTORE_LEVELING_AFTER_G35 // Enable to restore leveling setup after operation //#define REPORT_TRAMMING_MM // Report Z deviation (mm) for each point relative to the first - //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item for Assisted Tramming + + //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item to run G35 Assisted Tramming (MarlinUI) + //#define ASSISTED_TRAMMING_WIZARD // Make the menu item open a Tramming Wizard sub-menu /** * Screw thread: diff --git a/config/examples/Renkforce/RF100/Configuration_adv.h b/config/examples/Renkforce/RF100/Configuration_adv.h index 137fae1217..60b2884608 100644 --- a/config/examples/Renkforce/RF100/Configuration_adv.h +++ b/config/examples/Renkforce/RF100/Configuration_adv.h @@ -808,7 +808,9 @@ #define RESTORE_LEVELING_AFTER_G35 // Enable to restore leveling setup after operation //#define REPORT_TRAMMING_MM // Report Z deviation (mm) for each point relative to the first - //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item for Assisted Tramming + + //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item to run G35 Assisted Tramming (MarlinUI) + //#define ASSISTED_TRAMMING_WIZARD // Make the menu item open a Tramming Wizard sub-menu /** * Screw thread: diff --git a/config/examples/Renkforce/RF100XL/Configuration_adv.h b/config/examples/Renkforce/RF100XL/Configuration_adv.h index 137fae1217..60b2884608 100644 --- a/config/examples/Renkforce/RF100XL/Configuration_adv.h +++ b/config/examples/Renkforce/RF100XL/Configuration_adv.h @@ -808,7 +808,9 @@ #define RESTORE_LEVELING_AFTER_G35 // Enable to restore leveling setup after operation //#define REPORT_TRAMMING_MM // Report Z deviation (mm) for each point relative to the first - //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item for Assisted Tramming + + //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item to run G35 Assisted Tramming (MarlinUI) + //#define ASSISTED_TRAMMING_WIZARD // Make the menu item open a Tramming Wizard sub-menu /** * Screw thread: diff --git a/config/examples/Renkforce/RF100v2/Configuration_adv.h b/config/examples/Renkforce/RF100v2/Configuration_adv.h index 137fae1217..60b2884608 100644 --- a/config/examples/Renkforce/RF100v2/Configuration_adv.h +++ b/config/examples/Renkforce/RF100v2/Configuration_adv.h @@ -808,7 +808,9 @@ #define RESTORE_LEVELING_AFTER_G35 // Enable to restore leveling setup after operation //#define REPORT_TRAMMING_MM // Report Z deviation (mm) for each point relative to the first - //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item for Assisted Tramming + + //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item to run G35 Assisted Tramming (MarlinUI) + //#define ASSISTED_TRAMMING_WIZARD // Make the menu item open a Tramming Wizard sub-menu /** * Screw thread: diff --git a/config/examples/RigidBot/Configuration_adv.h b/config/examples/RigidBot/Configuration_adv.h index 1cdc04b796..ca08b7c56c 100644 --- a/config/examples/RigidBot/Configuration_adv.h +++ b/config/examples/RigidBot/Configuration_adv.h @@ -808,7 +808,9 @@ #define RESTORE_LEVELING_AFTER_G35 // Enable to restore leveling setup after operation //#define REPORT_TRAMMING_MM // Report Z deviation (mm) for each point relative to the first - //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item for Assisted Tramming + + //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item to run G35 Assisted Tramming (MarlinUI) + //#define ASSISTED_TRAMMING_WIZARD // Make the menu item open a Tramming Wizard sub-menu /** * Screw thread: diff --git a/config/examples/SCARA/MP_SCARA/Configuration_adv.h b/config/examples/SCARA/MP_SCARA/Configuration_adv.h index 31d5a3b9e7..392d0eed44 100644 --- a/config/examples/SCARA/MP_SCARA/Configuration_adv.h +++ b/config/examples/SCARA/MP_SCARA/Configuration_adv.h @@ -805,7 +805,9 @@ #define RESTORE_LEVELING_AFTER_G35 // Enable to restore leveling setup after operation //#define REPORT_TRAMMING_MM // Report Z deviation (mm) for each point relative to the first - //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item for Assisted Tramming + + //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item to run G35 Assisted Tramming (MarlinUI) + //#define ASSISTED_TRAMMING_WIZARD // Make the menu item open a Tramming Wizard sub-menu /** * Screw thread: diff --git a/config/examples/SCARA/Morgan/Configuration_adv.h b/config/examples/SCARA/Morgan/Configuration_adv.h index b5d16d6881..8aa145fc63 100644 --- a/config/examples/SCARA/Morgan/Configuration_adv.h +++ b/config/examples/SCARA/Morgan/Configuration_adv.h @@ -805,7 +805,9 @@ #define RESTORE_LEVELING_AFTER_G35 // Enable to restore leveling setup after operation //#define REPORT_TRAMMING_MM // Report Z deviation (mm) for each point relative to the first - //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item for Assisted Tramming + + //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item to run G35 Assisted Tramming (MarlinUI) + //#define ASSISTED_TRAMMING_WIZARD // Make the menu item open a Tramming Wizard sub-menu /** * Screw thread: diff --git a/config/examples/STM32/Black_STM32F407VET6/Configuration_adv.h b/config/examples/STM32/Black_STM32F407VET6/Configuration_adv.h index eead7e61f9..a2d8fd5c47 100644 --- a/config/examples/STM32/Black_STM32F407VET6/Configuration_adv.h +++ b/config/examples/STM32/Black_STM32F407VET6/Configuration_adv.h @@ -808,7 +808,9 @@ #define RESTORE_LEVELING_AFTER_G35 // Enable to restore leveling setup after operation //#define REPORT_TRAMMING_MM // Report Z deviation (mm) for each point relative to the first - //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item for Assisted Tramming + + //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item to run G35 Assisted Tramming (MarlinUI) + //#define ASSISTED_TRAMMING_WIZARD // Make the menu item open a Tramming Wizard sub-menu /** * Screw thread: diff --git a/config/examples/Sanguinololu/Configuration_adv.h b/config/examples/Sanguinololu/Configuration_adv.h index d7c225035a..022424151e 100644 --- a/config/examples/Sanguinololu/Configuration_adv.h +++ b/config/examples/Sanguinololu/Configuration_adv.h @@ -808,7 +808,9 @@ #define RESTORE_LEVELING_AFTER_G35 // Enable to restore leveling setup after operation //#define REPORT_TRAMMING_MM // Report Z deviation (mm) for each point relative to the first - //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item for Assisted Tramming + + //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item to run G35 Assisted Tramming (MarlinUI) + //#define ASSISTED_TRAMMING_WIZARD // Make the menu item open a Tramming Wizard sub-menu /** * Screw thread: diff --git a/config/examples/Sovol/SV-01/Configuration_adv.h b/config/examples/Sovol/SV-01/Configuration_adv.h index 56bd182d19..f6120d0d36 100644 --- a/config/examples/Sovol/SV-01/Configuration_adv.h +++ b/config/examples/Sovol/SV-01/Configuration_adv.h @@ -808,7 +808,9 @@ #define RESTORE_LEVELING_AFTER_G35 // Enable to restore leveling setup after operation //#define REPORT_TRAMMING_MM // Report Z deviation (mm) for each point relative to the first - //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item for Assisted Tramming + + //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item to run G35 Assisted Tramming (MarlinUI) + //#define ASSISTED_TRAMMING_WIZARD // Make the menu item open a Tramming Wizard sub-menu /** * Screw thread: diff --git a/config/examples/Tevo/Michelangelo/Configuration_adv.h b/config/examples/Tevo/Michelangelo/Configuration_adv.h index d266c79fd0..1233917099 100644 --- a/config/examples/Tevo/Michelangelo/Configuration_adv.h +++ b/config/examples/Tevo/Michelangelo/Configuration_adv.h @@ -808,7 +808,9 @@ #define RESTORE_LEVELING_AFTER_G35 // Enable to restore leveling setup after operation //#define REPORT_TRAMMING_MM // Report Z deviation (mm) for each point relative to the first - //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item for Assisted Tramming + + //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item to run G35 Assisted Tramming (MarlinUI) + //#define ASSISTED_TRAMMING_WIZARD // Make the menu item open a Tramming Wizard sub-menu /** * Screw thread: diff --git a/config/examples/Tevo/Nereus/Configuration_adv.h b/config/examples/Tevo/Nereus/Configuration_adv.h index 46acfd3e79..d4b053f23d 100644 --- a/config/examples/Tevo/Nereus/Configuration_adv.h +++ b/config/examples/Tevo/Nereus/Configuration_adv.h @@ -808,7 +808,9 @@ #define RESTORE_LEVELING_AFTER_G35 // Enable to restore leveling setup after operation //#define REPORT_TRAMMING_MM // Report Z deviation (mm) for each point relative to the first - //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item for Assisted Tramming + + //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item to run G35 Assisted Tramming (MarlinUI) + //#define ASSISTED_TRAMMING_WIZARD // Make the menu item open a Tramming Wizard sub-menu /** * Screw thread: diff --git a/config/examples/Tevo/Tarantula Pro/Configuration_adv.h b/config/examples/Tevo/Tarantula Pro/Configuration_adv.h index 9c440a9dd0..1d75806080 100644 --- a/config/examples/Tevo/Tarantula Pro/Configuration_adv.h +++ b/config/examples/Tevo/Tarantula Pro/Configuration_adv.h @@ -808,7 +808,9 @@ #define RESTORE_LEVELING_AFTER_G35 // Enable to restore leveling setup after operation //#define REPORT_TRAMMING_MM // Report Z deviation (mm) for each point relative to the first - //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item for Assisted Tramming + + //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item to run G35 Assisted Tramming (MarlinUI) + //#define ASSISTED_TRAMMING_WIZARD // Make the menu item open a Tramming Wizard sub-menu /** * Screw thread: diff --git a/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration_adv.h b/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration_adv.h index ec291b0c4c..725dfd4f9b 100644 --- a/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration_adv.h +++ b/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration_adv.h @@ -808,7 +808,9 @@ #define RESTORE_LEVELING_AFTER_G35 // Enable to restore leveling setup after operation //#define REPORT_TRAMMING_MM // Report Z deviation (mm) for each point relative to the first - //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item for Assisted Tramming + + //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item to run G35 Assisted Tramming (MarlinUI) + //#define ASSISTED_TRAMMING_WIZARD // Make the menu item open a Tramming Wizard sub-menu /** * Screw thread: diff --git a/config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration_adv.h b/config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration_adv.h index ec291b0c4c..725dfd4f9b 100644 --- a/config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration_adv.h +++ b/config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration_adv.h @@ -808,7 +808,9 @@ #define RESTORE_LEVELING_AFTER_G35 // Enable to restore leveling setup after operation //#define REPORT_TRAMMING_MM // Report Z deviation (mm) for each point relative to the first - //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item for Assisted Tramming + + //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item to run G35 Assisted Tramming (MarlinUI) + //#define ASSISTED_TRAMMING_WIZARD // Make the menu item open a Tramming Wizard sub-menu /** * Screw thread: diff --git a/config/examples/TheBorg/Configuration_adv.h b/config/examples/TheBorg/Configuration_adv.h index cf7d2eacd7..b946a65663 100644 --- a/config/examples/TheBorg/Configuration_adv.h +++ b/config/examples/TheBorg/Configuration_adv.h @@ -808,7 +808,9 @@ #define RESTORE_LEVELING_AFTER_G35 // Enable to restore leveling setup after operation //#define REPORT_TRAMMING_MM // Report Z deviation (mm) for each point relative to the first - //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item for Assisted Tramming + + //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item to run G35 Assisted Tramming (MarlinUI) + //#define ASSISTED_TRAMMING_WIZARD // Make the menu item open a Tramming Wizard sub-menu /** * Screw thread: diff --git a/config/examples/TinyBoy2/Configuration_adv.h b/config/examples/TinyBoy2/Configuration_adv.h index b0138ec10f..e865f891af 100644 --- a/config/examples/TinyBoy2/Configuration_adv.h +++ b/config/examples/TinyBoy2/Configuration_adv.h @@ -808,7 +808,9 @@ #define RESTORE_LEVELING_AFTER_G35 // Enable to restore leveling setup after operation //#define REPORT_TRAMMING_MM // Report Z deviation (mm) for each point relative to the first - //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item for Assisted Tramming + + //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item to run G35 Assisted Tramming (MarlinUI) + //#define ASSISTED_TRAMMING_WIZARD // Make the menu item open a Tramming Wizard sub-menu /** * Screw thread: diff --git a/config/examples/Tronxy/X3A/Configuration_adv.h b/config/examples/Tronxy/X3A/Configuration_adv.h index 225a1000a1..ab747fe19a 100644 --- a/config/examples/Tronxy/X3A/Configuration_adv.h +++ b/config/examples/Tronxy/X3A/Configuration_adv.h @@ -808,7 +808,9 @@ #define RESTORE_LEVELING_AFTER_G35 // Enable to restore leveling setup after operation //#define REPORT_TRAMMING_MM // Report Z deviation (mm) for each point relative to the first - //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item for Assisted Tramming + + //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item to run G35 Assisted Tramming (MarlinUI) + //#define ASSISTED_TRAMMING_WIZARD // Make the menu item open a Tramming Wizard sub-menu /** * Screw thread: diff --git a/config/examples/Tronxy/X5S-2E/Configuration_adv.h b/config/examples/Tronxy/X5S-2E/Configuration_adv.h index 5943f3eb4a..56da34ebb7 100644 --- a/config/examples/Tronxy/X5S-2E/Configuration_adv.h +++ b/config/examples/Tronxy/X5S-2E/Configuration_adv.h @@ -808,7 +808,9 @@ #define RESTORE_LEVELING_AFTER_G35 // Enable to restore leveling setup after operation //#define REPORT_TRAMMING_MM // Report Z deviation (mm) for each point relative to the first - //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item for Assisted Tramming + + //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item to run G35 Assisted Tramming (MarlinUI) + //#define ASSISTED_TRAMMING_WIZARD // Make the menu item open a Tramming Wizard sub-menu /** * Screw thread: diff --git a/config/examples/Tronxy/X5SA/Configuration_adv.h b/config/examples/Tronxy/X5SA/Configuration_adv.h index bb9d59d3c1..6a150fb0d8 100644 --- a/config/examples/Tronxy/X5SA/Configuration_adv.h +++ b/config/examples/Tronxy/X5SA/Configuration_adv.h @@ -808,7 +808,9 @@ #define RESTORE_LEVELING_AFTER_G35 // Enable to restore leveling setup after operation //#define REPORT_TRAMMING_MM // Report Z deviation (mm) for each point relative to the first - //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item for Assisted Tramming + + //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item to run G35 Assisted Tramming (MarlinUI) + //#define ASSISTED_TRAMMING_WIZARD // Make the menu item open a Tramming Wizard sub-menu /** * Screw thread: diff --git a/config/examples/UltiMachine/Archim1/Configuration_adv.h b/config/examples/UltiMachine/Archim1/Configuration_adv.h index e17e6e958a..90a79a7c4b 100644 --- a/config/examples/UltiMachine/Archim1/Configuration_adv.h +++ b/config/examples/UltiMachine/Archim1/Configuration_adv.h @@ -808,7 +808,9 @@ #define RESTORE_LEVELING_AFTER_G35 // Enable to restore leveling setup after operation //#define REPORT_TRAMMING_MM // Report Z deviation (mm) for each point relative to the first - //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item for Assisted Tramming + + //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item to run G35 Assisted Tramming (MarlinUI) + //#define ASSISTED_TRAMMING_WIZARD // Make the menu item open a Tramming Wizard sub-menu /** * Screw thread: diff --git a/config/examples/UltiMachine/Archim2/Configuration_adv.h b/config/examples/UltiMachine/Archim2/Configuration_adv.h index c5f190c3af..0a23246303 100644 --- a/config/examples/UltiMachine/Archim2/Configuration_adv.h +++ b/config/examples/UltiMachine/Archim2/Configuration_adv.h @@ -808,7 +808,9 @@ #define RESTORE_LEVELING_AFTER_G35 // Enable to restore leveling setup after operation //#define REPORT_TRAMMING_MM // Report Z deviation (mm) for each point relative to the first - //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item for Assisted Tramming + + //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item to run G35 Assisted Tramming (MarlinUI) + //#define ASSISTED_TRAMMING_WIZARD // Make the menu item open a Tramming Wizard sub-menu /** * Screw thread: diff --git a/config/examples/VORONDesign/Configuration_adv.h b/config/examples/VORONDesign/Configuration_adv.h index 2ddf3c8926..88e3bb9bfa 100644 --- a/config/examples/VORONDesign/Configuration_adv.h +++ b/config/examples/VORONDesign/Configuration_adv.h @@ -808,7 +808,9 @@ #define RESTORE_LEVELING_AFTER_G35 // Enable to restore leveling setup after operation //#define REPORT_TRAMMING_MM // Report Z deviation (mm) for each point relative to the first - //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item for Assisted Tramming + + //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item to run G35 Assisted Tramming (MarlinUI) + //#define ASSISTED_TRAMMING_WIZARD // Make the menu item open a Tramming Wizard sub-menu /** * Screw thread: diff --git a/config/examples/Velleman/K8200/Configuration_adv.h b/config/examples/Velleman/K8200/Configuration_adv.h index 4451306e89..773109baf1 100644 --- a/config/examples/Velleman/K8200/Configuration_adv.h +++ b/config/examples/Velleman/K8200/Configuration_adv.h @@ -821,7 +821,9 @@ #define RESTORE_LEVELING_AFTER_G35 // Enable to restore leveling setup after operation //#define REPORT_TRAMMING_MM // Report Z deviation (mm) for each point relative to the first - //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item for Assisted Tramming + + //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item to run G35 Assisted Tramming (MarlinUI) + //#define ASSISTED_TRAMMING_WIZARD // Make the menu item open a Tramming Wizard sub-menu /** * Screw thread: diff --git a/config/examples/Velleman/K8400/Dual-head/Configuration_adv.h b/config/examples/Velleman/K8400/Dual-head/Configuration_adv.h index 5e04bc98b2..8d6b1b615b 100644 --- a/config/examples/Velleman/K8400/Dual-head/Configuration_adv.h +++ b/config/examples/Velleman/K8400/Dual-head/Configuration_adv.h @@ -808,7 +808,9 @@ #define RESTORE_LEVELING_AFTER_G35 // Enable to restore leveling setup after operation //#define REPORT_TRAMMING_MM // Report Z deviation (mm) for each point relative to the first - //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item for Assisted Tramming + + //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item to run G35 Assisted Tramming (MarlinUI) + //#define ASSISTED_TRAMMING_WIZARD // Make the menu item open a Tramming Wizard sub-menu /** * Screw thread: diff --git a/config/examples/Velleman/K8400/Single-head/Configuration_adv.h b/config/examples/Velleman/K8400/Single-head/Configuration_adv.h index 5e04bc98b2..8d6b1b615b 100644 --- a/config/examples/Velleman/K8400/Single-head/Configuration_adv.h +++ b/config/examples/Velleman/K8400/Single-head/Configuration_adv.h @@ -808,7 +808,9 @@ #define RESTORE_LEVELING_AFTER_G35 // Enable to restore leveling setup after operation //#define REPORT_TRAMMING_MM // Report Z deviation (mm) for each point relative to the first - //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item for Assisted Tramming + + //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item to run G35 Assisted Tramming (MarlinUI) + //#define ASSISTED_TRAMMING_WIZARD // Make the menu item open a Tramming Wizard sub-menu /** * Screw thread: diff --git a/config/examples/WASP/PowerWASP/Configuration_adv.h b/config/examples/WASP/PowerWASP/Configuration_adv.h index d85b55189b..d274892c61 100644 --- a/config/examples/WASP/PowerWASP/Configuration_adv.h +++ b/config/examples/WASP/PowerWASP/Configuration_adv.h @@ -808,7 +808,9 @@ #define RESTORE_LEVELING_AFTER_G35 // Enable to restore leveling setup after operation //#define REPORT_TRAMMING_MM // Report Z deviation (mm) for each point relative to the first - //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item for Assisted Tramming + + //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item to run G35 Assisted Tramming (MarlinUI) + //#define ASSISTED_TRAMMING_WIZARD // Make the menu item open a Tramming Wizard sub-menu /** * Screw thread: diff --git a/config/examples/Wanhao/Duplicator 4S/Configuration_adv.h b/config/examples/Wanhao/Duplicator 4S/Configuration_adv.h index e45ca0cd12..8d0006660f 100644 --- a/config/examples/Wanhao/Duplicator 4S/Configuration_adv.h +++ b/config/examples/Wanhao/Duplicator 4S/Configuration_adv.h @@ -808,7 +808,9 @@ #define RESTORE_LEVELING_AFTER_G35 // Enable to restore leveling setup after operation //#define REPORT_TRAMMING_MM // Report Z deviation (mm) for each point relative to the first - //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item for Assisted Tramming + + //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item to run G35 Assisted Tramming (MarlinUI) + //#define ASSISTED_TRAMMING_WIZARD // Make the menu item open a Tramming Wizard sub-menu /** * Screw thread: diff --git a/config/examples/Wanhao/Duplicator 6/Configuration_adv.h b/config/examples/Wanhao/Duplicator 6/Configuration_adv.h index aa6ce45188..28648bdf09 100644 --- a/config/examples/Wanhao/Duplicator 6/Configuration_adv.h +++ b/config/examples/Wanhao/Duplicator 6/Configuration_adv.h @@ -808,7 +808,9 @@ #define RESTORE_LEVELING_AFTER_G35 // Enable to restore leveling setup after operation //#define REPORT_TRAMMING_MM // Report Z deviation (mm) for each point relative to the first - //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item for Assisted Tramming + + //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item to run G35 Assisted Tramming (MarlinUI) + //#define ASSISTED_TRAMMING_WIZARD // Make the menu item open a Tramming Wizard sub-menu /** * Screw thread: diff --git a/config/examples/Wanhao/Duplicator i3 2.1/Configuration_adv.h b/config/examples/Wanhao/Duplicator i3 2.1/Configuration_adv.h index ae3e543632..539edf8225 100644 --- a/config/examples/Wanhao/Duplicator i3 2.1/Configuration_adv.h +++ b/config/examples/Wanhao/Duplicator i3 2.1/Configuration_adv.h @@ -808,7 +808,9 @@ #define RESTORE_LEVELING_AFTER_G35 // Enable to restore leveling setup after operation //#define REPORT_TRAMMING_MM // Report Z deviation (mm) for each point relative to the first - //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item for Assisted Tramming + + //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item to run G35 Assisted Tramming (MarlinUI) + //#define ASSISTED_TRAMMING_WIZARD // Make the menu item open a Tramming Wizard sub-menu /** * Screw thread: diff --git a/config/examples/Wanhao/Duplicator i3 Mini/Configuration_adv.h b/config/examples/Wanhao/Duplicator i3 Mini/Configuration_adv.h index 7527172d68..4a581b836e 100644 --- a/config/examples/Wanhao/Duplicator i3 Mini/Configuration_adv.h +++ b/config/examples/Wanhao/Duplicator i3 Mini/Configuration_adv.h @@ -808,7 +808,9 @@ #define RESTORE_LEVELING_AFTER_G35 // Enable to restore leveling setup after operation //#define REPORT_TRAMMING_MM // Report Z deviation (mm) for each point relative to the first - //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item for Assisted Tramming + + //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item to run G35 Assisted Tramming (MarlinUI) + //#define ASSISTED_TRAMMING_WIZARD // Make the menu item open a Tramming Wizard sub-menu /** * Screw thread: diff --git a/config/examples/Weistek/wt150/Configuration_adv.h b/config/examples/Weistek/wt150/Configuration_adv.h index 497d94c26c..1c5ce16bb5 100644 --- a/config/examples/Weistek/wt150/Configuration_adv.h +++ b/config/examples/Weistek/wt150/Configuration_adv.h @@ -808,7 +808,9 @@ #define RESTORE_LEVELING_AFTER_G35 // Enable to restore leveling setup after operation //#define REPORT_TRAMMING_MM // Report Z deviation (mm) for each point relative to the first - //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item for Assisted Tramming + + //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item to run G35 Assisted Tramming (MarlinUI) + //#define ASSISTED_TRAMMING_WIZARD // Make the menu item open a Tramming Wizard sub-menu /** * Screw thread: diff --git a/config/examples/Zonestar/P802M/Configuration_adv.h b/config/examples/Zonestar/P802M/Configuration_adv.h index 0f962b45ec..d6dada7e5e 100644 --- a/config/examples/Zonestar/P802M/Configuration_adv.h +++ b/config/examples/Zonestar/P802M/Configuration_adv.h @@ -808,7 +808,9 @@ #define RESTORE_LEVELING_AFTER_G35 // Enable to restore leveling setup after operation //#define REPORT_TRAMMING_MM // Report Z deviation (mm) for each point relative to the first - //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item for Assisted Tramming + + //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item to run G35 Assisted Tramming (MarlinUI) + //#define ASSISTED_TRAMMING_WIZARD // Make the menu item open a Tramming Wizard sub-menu /** * Screw thread: diff --git a/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (A4988)/Configuration_adv.h b/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (A4988)/Configuration_adv.h index fea674cf30..22977960cc 100755 --- a/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (A4988)/Configuration_adv.h +++ b/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (A4988)/Configuration_adv.h @@ -809,7 +809,9 @@ #define RESTORE_LEVELING_AFTER_G35 // Enable to restore leveling setup after operation //#define REPORT_TRAMMING_MM // Report Z deviation (mm) for each point relative to the first - //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item for Assisted Tramming + + //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item to run G35 Assisted Tramming (MarlinUI) + //#define ASSISTED_TRAMMING_WIZARD // Make the menu item open a Tramming Wizard sub-menu /** * Screw thread: diff --git a/config/examples/delta/Anycubic/Kossel Linear Plus/Configuration_adv.h b/config/examples/delta/Anycubic/Kossel Linear Plus/Configuration_adv.h index d16367a9e7..43fca5b36c 100644 --- a/config/examples/delta/Anycubic/Kossel Linear Plus/Configuration_adv.h +++ b/config/examples/delta/Anycubic/Kossel Linear Plus/Configuration_adv.h @@ -810,7 +810,9 @@ #define RESTORE_LEVELING_AFTER_G35 // Enable to restore leveling setup after operation //#define REPORT_TRAMMING_MM // Report Z deviation (mm) for each point relative to the first - //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item for Assisted Tramming + + //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item to run G35 Assisted Tramming (MarlinUI) + //#define ASSISTED_TRAMMING_WIZARD // Make the menu item open a Tramming Wizard sub-menu /** * Screw thread: diff --git a/config/examples/delta/Anycubic/Kossel/Configuration_adv.h b/config/examples/delta/Anycubic/Kossel/Configuration_adv.h index 2c12a8c8e2..5aa0797a47 100644 --- a/config/examples/delta/Anycubic/Kossel/Configuration_adv.h +++ b/config/examples/delta/Anycubic/Kossel/Configuration_adv.h @@ -809,7 +809,9 @@ #define RESTORE_LEVELING_AFTER_G35 // Enable to restore leveling setup after operation //#define REPORT_TRAMMING_MM // Report Z deviation (mm) for each point relative to the first - //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item for Assisted Tramming + + //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item to run G35 Assisted Tramming (MarlinUI) + //#define ASSISTED_TRAMMING_WIZARD // Make the menu item open a Tramming Wizard sub-menu /** * Screw thread: diff --git a/config/examples/delta/Anycubic/Predator/Configuration_adv.h b/config/examples/delta/Anycubic/Predator/Configuration_adv.h index 6c92ae2ea2..87676ecc54 100644 --- a/config/examples/delta/Anycubic/Predator/Configuration_adv.h +++ b/config/examples/delta/Anycubic/Predator/Configuration_adv.h @@ -808,7 +808,9 @@ #define RESTORE_LEVELING_AFTER_G35 // Enable to restore leveling setup after operation //#define REPORT_TRAMMING_MM // Report Z deviation (mm) for each point relative to the first - //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item for Assisted Tramming + + //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item to run G35 Assisted Tramming (MarlinUI) + //#define ASSISTED_TRAMMING_WIZARD // Make the menu item open a Tramming Wizard sub-menu /** * Screw thread: diff --git a/config/examples/delta/Dreammaker/Overlord/Configuration_adv.h b/config/examples/delta/Dreammaker/Overlord/Configuration_adv.h index 261f4dd9dc..af24b9d21a 100644 --- a/config/examples/delta/Dreammaker/Overlord/Configuration_adv.h +++ b/config/examples/delta/Dreammaker/Overlord/Configuration_adv.h @@ -809,7 +809,9 @@ #define RESTORE_LEVELING_AFTER_G35 // Enable to restore leveling setup after operation //#define REPORT_TRAMMING_MM // Report Z deviation (mm) for each point relative to the first - //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item for Assisted Tramming + + //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item to run G35 Assisted Tramming (MarlinUI) + //#define ASSISTED_TRAMMING_WIZARD // Make the menu item open a Tramming Wizard sub-menu /** * Screw thread: diff --git a/config/examples/delta/Dreammaker/Overlord_Pro/Configuration_adv.h b/config/examples/delta/Dreammaker/Overlord_Pro/Configuration_adv.h index 3aab51ceca..36fb2eb668 100644 --- a/config/examples/delta/Dreammaker/Overlord_Pro/Configuration_adv.h +++ b/config/examples/delta/Dreammaker/Overlord_Pro/Configuration_adv.h @@ -809,7 +809,9 @@ #define RESTORE_LEVELING_AFTER_G35 // Enable to restore leveling setup after operation //#define REPORT_TRAMMING_MM // Report Z deviation (mm) for each point relative to the first - //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item for Assisted Tramming + + //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item to run G35 Assisted Tramming (MarlinUI) + //#define ASSISTED_TRAMMING_WIZARD // Make the menu item open a Tramming Wizard sub-menu /** * Screw thread: diff --git a/config/examples/delta/FLSUN/QQ-S/Configuration_adv.h b/config/examples/delta/FLSUN/QQ-S/Configuration_adv.h index 514bedf52a..4392fa6d2b 100644 --- a/config/examples/delta/FLSUN/QQ-S/Configuration_adv.h +++ b/config/examples/delta/FLSUN/QQ-S/Configuration_adv.h @@ -809,7 +809,9 @@ #define RESTORE_LEVELING_AFTER_G35 // Enable to restore leveling setup after operation //#define REPORT_TRAMMING_MM // Report Z deviation (mm) for each point relative to the first - //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item for Assisted Tramming + + //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item to run G35 Assisted Tramming (MarlinUI) + //#define ASSISTED_TRAMMING_WIZARD // Make the menu item open a Tramming Wizard sub-menu /** * Screw thread: diff --git a/config/examples/delta/FLSUN/QQS-Pro/Configuration_adv.h b/config/examples/delta/FLSUN/QQS-Pro/Configuration_adv.h index b417263509..44b4b61152 100644 --- a/config/examples/delta/FLSUN/QQS-Pro/Configuration_adv.h +++ b/config/examples/delta/FLSUN/QQS-Pro/Configuration_adv.h @@ -809,7 +809,9 @@ #define RESTORE_LEVELING_AFTER_G35 // Enable to restore leveling setup after operation //#define REPORT_TRAMMING_MM // Report Z deviation (mm) for each point relative to the first - //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item for Assisted Tramming + + //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item to run G35 Assisted Tramming (MarlinUI) + //#define ASSISTED_TRAMMING_WIZARD // Make the menu item open a Tramming Wizard sub-menu /** * Screw thread: diff --git a/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h b/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h index 2fe7e3baf6..ee6d4a580d 100644 --- a/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h +++ b/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h @@ -809,7 +809,9 @@ #define RESTORE_LEVELING_AFTER_G35 // Enable to restore leveling setup after operation //#define REPORT_TRAMMING_MM // Report Z deviation (mm) for each point relative to the first - //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item for Assisted Tramming + + //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item to run G35 Assisted Tramming (MarlinUI) + //#define ASSISTED_TRAMMING_WIZARD // Make the menu item open a Tramming Wizard sub-menu /** * Screw thread: diff --git a/config/examples/delta/FLSUN/kossel/Configuration_adv.h b/config/examples/delta/FLSUN/kossel/Configuration_adv.h index 2fe7e3baf6..ee6d4a580d 100644 --- a/config/examples/delta/FLSUN/kossel/Configuration_adv.h +++ b/config/examples/delta/FLSUN/kossel/Configuration_adv.h @@ -809,7 +809,9 @@ #define RESTORE_LEVELING_AFTER_G35 // Enable to restore leveling setup after operation //#define REPORT_TRAMMING_MM // Report Z deviation (mm) for each point relative to the first - //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item for Assisted Tramming + + //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item to run G35 Assisted Tramming (MarlinUI) + //#define ASSISTED_TRAMMING_WIZARD // Make the menu item open a Tramming Wizard sub-menu /** * Screw thread: diff --git a/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h b/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h index 62b566e08f..98de96d7de 100644 --- a/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h +++ b/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h @@ -809,7 +809,9 @@ #define RESTORE_LEVELING_AFTER_G35 // Enable to restore leveling setup after operation //#define REPORT_TRAMMING_MM // Report Z deviation (mm) for each point relative to the first - //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item for Assisted Tramming + + //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item to run G35 Assisted Tramming (MarlinUI) + //#define ASSISTED_TRAMMING_WIZARD // Make the menu item open a Tramming Wizard sub-menu /** * Screw thread: diff --git a/config/examples/delta/Geeetech/G2/Configuration_adv.h b/config/examples/delta/Geeetech/G2/Configuration_adv.h index bcc9bb3362..2f35e67295 100644 --- a/config/examples/delta/Geeetech/G2/Configuration_adv.h +++ b/config/examples/delta/Geeetech/G2/Configuration_adv.h @@ -809,7 +809,9 @@ #define RESTORE_LEVELING_AFTER_G35 // Enable to restore leveling setup after operation //#define REPORT_TRAMMING_MM // Report Z deviation (mm) for each point relative to the first - //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item for Assisted Tramming + + //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item to run G35 Assisted Tramming (MarlinUI) + //#define ASSISTED_TRAMMING_WIZARD // Make the menu item open a Tramming Wizard sub-menu /** * Screw thread: diff --git a/config/examples/delta/Geeetech/G2Pro/Configuration_adv.h b/config/examples/delta/Geeetech/G2Pro/Configuration_adv.h index 8d48f185c8..df69c7eda5 100644 --- a/config/examples/delta/Geeetech/G2Pro/Configuration_adv.h +++ b/config/examples/delta/Geeetech/G2Pro/Configuration_adv.h @@ -809,7 +809,9 @@ #define RESTORE_LEVELING_AFTER_G35 // Enable to restore leveling setup after operation //#define REPORT_TRAMMING_MM // Report Z deviation (mm) for each point relative to the first - //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item for Assisted Tramming + + //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item to run G35 Assisted Tramming (MarlinUI) + //#define ASSISTED_TRAMMING_WIZARD // Make the menu item open a Tramming Wizard sub-menu /** * Screw thread: diff --git a/config/examples/delta/Geeetech/G2S/Configuration_adv.h b/config/examples/delta/Geeetech/G2S/Configuration_adv.h index 8d48f185c8..df69c7eda5 100644 --- a/config/examples/delta/Geeetech/G2S/Configuration_adv.h +++ b/config/examples/delta/Geeetech/G2S/Configuration_adv.h @@ -809,7 +809,9 @@ #define RESTORE_LEVELING_AFTER_G35 // Enable to restore leveling setup after operation //#define REPORT_TRAMMING_MM // Report Z deviation (mm) for each point relative to the first - //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item for Assisted Tramming + + //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item to run G35 Assisted Tramming (MarlinUI) + //#define ASSISTED_TRAMMING_WIZARD // Make the menu item open a Tramming Wizard sub-menu /** * Screw thread: diff --git a/config/examples/delta/Geeetech/G2SPro/Configuration_adv.h b/config/examples/delta/Geeetech/G2SPro/Configuration_adv.h index 8d48f185c8..df69c7eda5 100644 --- a/config/examples/delta/Geeetech/G2SPro/Configuration_adv.h +++ b/config/examples/delta/Geeetech/G2SPro/Configuration_adv.h @@ -809,7 +809,9 @@ #define RESTORE_LEVELING_AFTER_G35 // Enable to restore leveling setup after operation //#define REPORT_TRAMMING_MM // Report Z deviation (mm) for each point relative to the first - //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item for Assisted Tramming + + //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item to run G35 Assisted Tramming (MarlinUI) + //#define ASSISTED_TRAMMING_WIZARD // Make the menu item open a Tramming Wizard sub-menu /** * Screw thread: diff --git a/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h b/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h index e9a3fedce0..026332f9db 100644 --- a/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h +++ b/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h @@ -809,7 +809,9 @@ #define RESTORE_LEVELING_AFTER_G35 // Enable to restore leveling setup after operation //#define REPORT_TRAMMING_MM // Report Z deviation (mm) for each point relative to the first - //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item for Assisted Tramming + + //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item to run G35 Assisted Tramming (MarlinUI) + //#define ASSISTED_TRAMMING_WIZARD // Make the menu item open a Tramming Wizard sub-menu /** * Screw thread: diff --git a/config/examples/delta/Hatchbox_Alpha/Configuration_adv.h b/config/examples/delta/Hatchbox_Alpha/Configuration_adv.h index 1c0f830e2f..a8e6abfcae 100644 --- a/config/examples/delta/Hatchbox_Alpha/Configuration_adv.h +++ b/config/examples/delta/Hatchbox_Alpha/Configuration_adv.h @@ -809,7 +809,9 @@ #define RESTORE_LEVELING_AFTER_G35 // Enable to restore leveling setup after operation //#define REPORT_TRAMMING_MM // Report Z deviation (mm) for each point relative to the first - //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item for Assisted Tramming + + //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item to run G35 Assisted Tramming (MarlinUI) + //#define ASSISTED_TRAMMING_WIZARD // Make the menu item open a Tramming Wizard sub-menu /** * Screw thread: diff --git a/config/examples/delta/MKS/SBASE/Configuration_adv.h b/config/examples/delta/MKS/SBASE/Configuration_adv.h index faced9acda..85d92daf64 100644 --- a/config/examples/delta/MKS/SBASE/Configuration_adv.h +++ b/config/examples/delta/MKS/SBASE/Configuration_adv.h @@ -809,7 +809,9 @@ #define RESTORE_LEVELING_AFTER_G35 // Enable to restore leveling setup after operation //#define REPORT_TRAMMING_MM // Report Z deviation (mm) for each point relative to the first - //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item for Assisted Tramming + + //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item to run G35 Assisted Tramming (MarlinUI) + //#define ASSISTED_TRAMMING_WIZARD // Make the menu item open a Tramming Wizard sub-menu /** * Screw thread: diff --git a/config/examples/delta/Malyan M300/Configuration_adv.h b/config/examples/delta/Malyan M300/Configuration_adv.h index 723a747670..9a312695a2 100644 --- a/config/examples/delta/Malyan M300/Configuration_adv.h +++ b/config/examples/delta/Malyan M300/Configuration_adv.h @@ -809,7 +809,9 @@ #define RESTORE_LEVELING_AFTER_G35 // Enable to restore leveling setup after operation //#define REPORT_TRAMMING_MM // Report Z deviation (mm) for each point relative to the first - //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item for Assisted Tramming + + //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item to run G35 Assisted Tramming (MarlinUI) + //#define ASSISTED_TRAMMING_WIZARD // Make the menu item open a Tramming Wizard sub-menu /** * Screw thread: diff --git a/config/examples/delta/Tevo Little Monster/Configuration_adv.h b/config/examples/delta/Tevo Little Monster/Configuration_adv.h index cd2ea4c464..14749c3d73 100644 --- a/config/examples/delta/Tevo Little Monster/Configuration_adv.h +++ b/config/examples/delta/Tevo Little Monster/Configuration_adv.h @@ -809,7 +809,9 @@ #define RESTORE_LEVELING_AFTER_G35 // Enable to restore leveling setup after operation //#define REPORT_TRAMMING_MM // Report Z deviation (mm) for each point relative to the first - //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item for Assisted Tramming + + //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item to run G35 Assisted Tramming (MarlinUI) + //#define ASSISTED_TRAMMING_WIZARD // Make the menu item open a Tramming Wizard sub-menu /** * Screw thread: diff --git a/config/examples/delta/generic/Configuration_adv.h b/config/examples/delta/generic/Configuration_adv.h index 62b566e08f..98de96d7de 100644 --- a/config/examples/delta/generic/Configuration_adv.h +++ b/config/examples/delta/generic/Configuration_adv.h @@ -809,7 +809,9 @@ #define RESTORE_LEVELING_AFTER_G35 // Enable to restore leveling setup after operation //#define REPORT_TRAMMING_MM // Report Z deviation (mm) for each point relative to the first - //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item for Assisted Tramming + + //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item to run G35 Assisted Tramming (MarlinUI) + //#define ASSISTED_TRAMMING_WIZARD // Make the menu item open a Tramming Wizard sub-menu /** * Screw thread: diff --git a/config/examples/delta/kossel_clear/Configuration_adv.h b/config/examples/delta/kossel_clear/Configuration_adv.h index 786118684e..0b4caf95f1 100644 --- a/config/examples/delta/kossel_clear/Configuration_adv.h +++ b/config/examples/delta/kossel_clear/Configuration_adv.h @@ -809,7 +809,9 @@ #define RESTORE_LEVELING_AFTER_G35 // Enable to restore leveling setup after operation //#define REPORT_TRAMMING_MM // Report Z deviation (mm) for each point relative to the first - //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item for Assisted Tramming + + //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item to run G35 Assisted Tramming (MarlinUI) + //#define ASSISTED_TRAMMING_WIZARD // Make the menu item open a Tramming Wizard sub-menu /** * Screw thread: diff --git a/config/examples/delta/kossel_xl/Configuration_adv.h b/config/examples/delta/kossel_xl/Configuration_adv.h index 41d15d8b83..56d7095c74 100644 --- a/config/examples/delta/kossel_xl/Configuration_adv.h +++ b/config/examples/delta/kossel_xl/Configuration_adv.h @@ -809,7 +809,9 @@ #define RESTORE_LEVELING_AFTER_G35 // Enable to restore leveling setup after operation //#define REPORT_TRAMMING_MM // Report Z deviation (mm) for each point relative to the first - //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item for Assisted Tramming + + //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item to run G35 Assisted Tramming (MarlinUI) + //#define ASSISTED_TRAMMING_WIZARD // Make the menu item open a Tramming Wizard sub-menu /** * Screw thread: diff --git a/config/examples/gCreate/gMax1.5+/Configuration_adv.h b/config/examples/gCreate/gMax1.5+/Configuration_adv.h index af6cf44b0e..7f31567838 100644 --- a/config/examples/gCreate/gMax1.5+/Configuration_adv.h +++ b/config/examples/gCreate/gMax1.5+/Configuration_adv.h @@ -808,7 +808,9 @@ #define RESTORE_LEVELING_AFTER_G35 // Enable to restore leveling setup after operation //#define REPORT_TRAMMING_MM // Report Z deviation (mm) for each point relative to the first - //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item for Assisted Tramming + + //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item to run G35 Assisted Tramming (MarlinUI) + //#define ASSISTED_TRAMMING_WIZARD // Make the menu item open a Tramming Wizard sub-menu /** * Screw thread: diff --git a/config/examples/makibox/Configuration_adv.h b/config/examples/makibox/Configuration_adv.h index 0528f3f925..c6d2d7d9d4 100644 --- a/config/examples/makibox/Configuration_adv.h +++ b/config/examples/makibox/Configuration_adv.h @@ -808,7 +808,9 @@ #define RESTORE_LEVELING_AFTER_G35 // Enable to restore leveling setup after operation //#define REPORT_TRAMMING_MM // Report Z deviation (mm) for each point relative to the first - //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item for Assisted Tramming + + //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item to run G35 Assisted Tramming (MarlinUI) + //#define ASSISTED_TRAMMING_WIZARD // Make the menu item open a Tramming Wizard sub-menu /** * Screw thread: diff --git a/config/examples/tvrrug/Round2/Configuration_adv.h b/config/examples/tvrrug/Round2/Configuration_adv.h index 2e0047e8b8..1bc8e12b41 100644 --- a/config/examples/tvrrug/Round2/Configuration_adv.h +++ b/config/examples/tvrrug/Round2/Configuration_adv.h @@ -808,7 +808,9 @@ #define RESTORE_LEVELING_AFTER_G35 // Enable to restore leveling setup after operation //#define REPORT_TRAMMING_MM // Report Z deviation (mm) for each point relative to the first - //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item for Assisted Tramming + + //#define ASSISTED_TRAMMING_MENU_ITEM // Add a menu item to run G35 Assisted Tramming (MarlinUI) + //#define ASSISTED_TRAMMING_WIZARD // Make the menu item open a Tramming Wizard sub-menu /** * Screw thread: