3D-printing/Configurations
1
0
Fork 0
mirror of https://github.com/MarlinFirmware/Configurations.git synced 2025-07-08 07:27:44 -06:00
Code Issues Projects Releases Packages Wiki Activity Actions

🔧 Adjust DISABLE_* and DISABLE_INACTIVE_*

Browse source 
MarlinFirmware/Marlin#25422
This commit is contained in:
Scott Lahteine 2023-02-23 19:43:23 -06:00
parent d57207b4ff
commit 25b39f214b
643 changed files with 6430 additions and 6736 deletions
Download patch file Download diff file Expand all files Collapse all files

20
config/default/Configuration.h
View file

@ -1681,22 +1681,22 @@
// Disable axis steppers immediately when they're not being stepped. // Disable axis steppers immediately when they're not being stepped.
// WARNING: When motors turn off there is a chance of losing position accuracy! // WARNING: When motors turn off there is a chance of losing position accuracy!
#define DISABLE_X false //#define DISABLE_X
#define DISABLE_Y false //#define DISABLE_Y
#define DISABLE_Z false //#define DISABLE_Z
//#define DISABLE_I false //#define DISABLE_I
//#define DISABLE_J false //#define DISABLE_J
//#define DISABLE_K false //#define DISABLE_K
//#define DISABLE_U false //#define DISABLE_U
//#define DISABLE_V false //#define DISABLE_V
//#define DISABLE_W false //#define DISABLE_W
// Turn off the display blinking that warns about possible accuracy reduction // Turn off the display blinking that warns about possible accuracy reduction
//#define DISABLE_REDUCED_ACCURACY_WARNING //#define DISABLE_REDUCED_ACCURACY_WARNING
// @section extruder // @section extruder
#define DISABLE_E false // Disable the extruder when not stepping //#define DISABLE_E // Disable the extruder when not stepping
#define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled #define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled
// @section motion // @section motion

21
config/default/Configuration_adv.h
View file

@ -1118,20 +1118,19 @@
/** /**
* Idle Stepper Shutdown * Idle Stepper Shutdown
* Set DISABLE_INACTIVE_? 'true' to shut down axis steppers after an idle period. * Enable DISABLE_INACTIVE_* to shut down axis steppers after an idle period.
* The Deactive Time can be overridden with M18 and M84. Set to 0 for No Timeout. * The Deactive Time can be overridden with M18 and M84. Set to 0 for No Timeout.
*/ */
#define DEFAULT_STEPPER_DEACTIVE_TIME 120 #define DEFAULT_STEPPER_DEACTIVE_TIME 120
#define DISABLE_INACTIVE_X true #define DISABLE_INACTIVE_X
#define DISABLE_INACTIVE_Y true #define DISABLE_INACTIVE_Y
#define DISABLE_INACTIVE_Z true // Set 'false' if the nozzle could fall onto your printed part! #define DISABLE_INACTIVE_Z // Disable if the nozzle could fall onto your printed part!
#define DISABLE_INACTIVE_I true //#define DISABLE_INACTIVE_I
#define DISABLE_INACTIVE_J true //#define DISABLE_INACTIVE_J
#define DISABLE_INACTIVE_K true //#define DISABLE_INACTIVE_K
#define DISABLE_INACTIVE_U true //#define DISABLE_INACTIVE_U
#define DISABLE_INACTIVE_V true //#define DISABLE_INACTIVE_V
#define DISABLE_INACTIVE_W true //#define DISABLE_INACTIVE_W
#define DISABLE_INACTIVE_E true
// Default Minimum Feedrates for printing and travel moves // Default Minimum Feedrates for printing and travel moves
#define DEFAULT_MINIMUMFEEDRATE 0.0 // (mm/s) Minimum feedrate. Set with M205 S. #define DEFAULT_MINIMUMFEEDRATE 0.0 // (mm/s) Minimum feedrate. Set with M205 S.

20
config/examples/3DFabXYZ/Migbot/Configuration.h
View file

@ -1683,22 +1683,22 @@
// Disable axis steppers immediately when they're not being stepped. // Disable axis steppers immediately when they're not being stepped.
// WARNING: When motors turn off there is a chance of losing position accuracy! // WARNING: When motors turn off there is a chance of losing position accuracy!
#define DISABLE_X false //#define DISABLE_X
#define DISABLE_Y false //#define DISABLE_Y
#define DISABLE_Z false //#define DISABLE_Z
//#define DISABLE_I false //#define DISABLE_I
//#define DISABLE_J false //#define DISABLE_J
//#define DISABLE_K false //#define DISABLE_K
//#define DISABLE_U false //#define DISABLE_U
//#define DISABLE_V false //#define DISABLE_V
//#define DISABLE_W false //#define DISABLE_W
// Turn off the display blinking that warns about possible accuracy reduction // Turn off the display blinking that warns about possible accuracy reduction
//#define DISABLE_REDUCED_ACCURACY_WARNING //#define DISABLE_REDUCED_ACCURACY_WARNING
// @section extruder // @section extruder
#define DISABLE_E false // Disable the extruder when not stepping //#define DISABLE_E // Disable the extruder when not stepping
#define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled #define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled
// @section motion // @section motion

21
config/examples/3DFabXYZ/Migbot/Configuration_adv.h
View file

@ -1118,20 +1118,19 @@
/** /**
* Idle Stepper Shutdown * Idle Stepper Shutdown
* Set DISABLE_INACTIVE_? 'true' to shut down axis steppers after an idle period. * Enable DISABLE_INACTIVE_* to shut down axis steppers after an idle period.
* The Deactive Time can be overridden with M18 and M84. Set to 0 for No Timeout. * The Deactive Time can be overridden with M18 and M84. Set to 0 for No Timeout.
*/ */
#define DEFAULT_STEPPER_DEACTIVE_TIME 120 #define DEFAULT_STEPPER_DEACTIVE_TIME 120
#define DISABLE_INACTIVE_X true #define DISABLE_INACTIVE_X
#define DISABLE_INACTIVE_Y true #define DISABLE_INACTIVE_Y
#define DISABLE_INACTIVE_Z true // Set 'false' if the nozzle could fall onto your printed part! #define DISABLE_INACTIVE_Z // Disable if the nozzle could fall onto your printed part!
#define DISABLE_INACTIVE_I true //#define DISABLE_INACTIVE_I
#define DISABLE_INACTIVE_J true //#define DISABLE_INACTIVE_J
#define DISABLE_INACTIVE_K true //#define DISABLE_INACTIVE_K
#define DISABLE_INACTIVE_U true //#define DISABLE_INACTIVE_U
#define DISABLE_INACTIVE_V true //#define DISABLE_INACTIVE_V
#define DISABLE_INACTIVE_W true //#define DISABLE_INACTIVE_W
#define DISABLE_INACTIVE_E true
// Default Minimum Feedrates for printing and travel moves // Default Minimum Feedrates for printing and travel moves
#define DEFAULT_MINIMUMFEEDRATE 0.0 // (mm/s) Minimum feedrate. Set with M205 S. #define DEFAULT_MINIMUMFEEDRATE 0.0 // (mm/s) Minimum feedrate. Set with M205 S.

20
config/examples/ADIMLab/Gantry v1/Configuration.h
View file

@ -1681,22 +1681,22 @@
// Disable axis steppers immediately when they're not being stepped. // Disable axis steppers immediately when they're not being stepped.
// WARNING: When motors turn off there is a chance of losing position accuracy! // WARNING: When motors turn off there is a chance of losing position accuracy!
#define DISABLE_X false //#define DISABLE_X
#define DISABLE_Y false //#define DISABLE_Y
#define DISABLE_Z false //#define DISABLE_Z
//#define DISABLE_I false //#define DISABLE_I
//#define DISABLE_J false //#define DISABLE_J
//#define DISABLE_K false //#define DISABLE_K
//#define DISABLE_U false //#define DISABLE_U
//#define DISABLE_V false //#define DISABLE_V
//#define DISABLE_W false //#define DISABLE_W
// Turn off the display blinking that warns about possible accuracy reduction // Turn off the display blinking that warns about possible accuracy reduction
//#define DISABLE_REDUCED_ACCURACY_WARNING //#define DISABLE_REDUCED_ACCURACY_WARNING
// @section extruder // @section extruder
#define DISABLE_E false // Disable the extruder when not stepping //#define DISABLE_E // Disable the extruder when not stepping
#define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled #define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled
// @section motion // @section motion

21
config/examples/ADIMLab/Gantry v1/Configuration_adv.h
View file

@ -1118,20 +1118,19 @@
/** /**
* Idle Stepper Shutdown * Idle Stepper Shutdown
* Set DISABLE_INACTIVE_? 'true' to shut down axis steppers after an idle period. * Enable DISABLE_INACTIVE_* to shut down axis steppers after an idle period.
* The Deactive Time can be overridden with M18 and M84. Set to 0 for No Timeout. * The Deactive Time can be overridden with M18 and M84. Set to 0 for No Timeout.
*/ */
#define DEFAULT_STEPPER_DEACTIVE_TIME 120 #define DEFAULT_STEPPER_DEACTIVE_TIME 120
#define DISABLE_INACTIVE_X true #define DISABLE_INACTIVE_X
#define DISABLE_INACTIVE_Y true #define DISABLE_INACTIVE_Y
#define DISABLE_INACTIVE_Z true // Set 'false' if the nozzle could fall onto your printed part! #define DISABLE_INACTIVE_Z // Disable if the nozzle could fall onto your printed part!
#define DISABLE_INACTIVE_I true //#define DISABLE_INACTIVE_I
#define DISABLE_INACTIVE_J true //#define DISABLE_INACTIVE_J
#define DISABLE_INACTIVE_K true //#define DISABLE_INACTIVE_K
#define DISABLE_INACTIVE_U true //#define DISABLE_INACTIVE_U
#define DISABLE_INACTIVE_V true //#define DISABLE_INACTIVE_V
#define DISABLE_INACTIVE_W true //#define DISABLE_INACTIVE_W
#define DISABLE_INACTIVE_E true
// Default Minimum Feedrates for printing and travel moves // Default Minimum Feedrates for printing and travel moves
#define DEFAULT_MINIMUMFEEDRATE 0.0 // (mm/s) Minimum feedrate. Set with M205 S. #define DEFAULT_MINIMUMFEEDRATE 0.0 // (mm/s) Minimum feedrate. Set with M205 S.

20
config/examples/ADIMLab/Gantry v2/Configuration.h
View file

@ -1681,22 +1681,22 @@
// Disable axis steppers immediately when they're not being stepped. // Disable axis steppers immediately when they're not being stepped.
// WARNING: When motors turn off there is a chance of losing position accuracy! // WARNING: When motors turn off there is a chance of losing position accuracy!
#define DISABLE_X false //#define DISABLE_X
#define DISABLE_Y false //#define DISABLE_Y
#define DISABLE_Z false //#define DISABLE_Z
//#define DISABLE_I false //#define DISABLE_I
//#define DISABLE_J false //#define DISABLE_J
//#define DISABLE_K false //#define DISABLE_K
//#define DISABLE_U false //#define DISABLE_U
//#define DISABLE_V false //#define DISABLE_V
//#define DISABLE_W false //#define DISABLE_W
// Turn off the display blinking that warns about possible accuracy reduction // Turn off the display blinking that warns about possible accuracy reduction
//#define DISABLE_REDUCED_ACCURACY_WARNING //#define DISABLE_REDUCED_ACCURACY_WARNING
// @section extruder // @section extruder
#define DISABLE_E false // Disable the extruder when not stepping //#define DISABLE_E // Disable the extruder when not stepping
#define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled #define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled
// @section motion // @section motion

21
config/examples/ADIMLab/Gantry v2/Configuration_adv.h
View file

@ -1118,20 +1118,19 @@
/** /**
* Idle Stepper Shutdown * Idle Stepper Shutdown
* Set DISABLE_INACTIVE_? 'true' to shut down axis steppers after an idle period. * Enable DISABLE_INACTIVE_* to shut down axis steppers after an idle period.
* The Deactive Time can be overridden with M18 and M84. Set to 0 for No Timeout. * The Deactive Time can be overridden with M18 and M84. Set to 0 for No Timeout.
*/ */
#define DEFAULT_STEPPER_DEACTIVE_TIME 120 #define DEFAULT_STEPPER_DEACTIVE_TIME 120
#define DISABLE_INACTIVE_X true #define DISABLE_INACTIVE_X
#define DISABLE_INACTIVE_Y true #define DISABLE_INACTIVE_Y
#define DISABLE_INACTIVE_Z true // Set 'false' if the nozzle could fall onto your printed part! #define DISABLE_INACTIVE_Z // Disable if the nozzle could fall onto your printed part!
#define DISABLE_INACTIVE_I true //#define DISABLE_INACTIVE_I
#define DISABLE_INACTIVE_J true //#define DISABLE_INACTIVE_J
#define DISABLE_INACTIVE_K true //#define DISABLE_INACTIVE_K
#define DISABLE_INACTIVE_U true //#define DISABLE_INACTIVE_U
#define DISABLE_INACTIVE_V true //#define DISABLE_INACTIVE_V
#define DISABLE_INACTIVE_W true //#define DISABLE_INACTIVE_W
#define DISABLE_INACTIVE_E true
// Default Minimum Feedrates for printing and travel moves // Default Minimum Feedrates for printing and travel moves
#define DEFAULT_MINIMUMFEEDRATE 0.0 // (mm/s) Minimum feedrate. Set with M205 S. #define DEFAULT_MINIMUMFEEDRATE 0.0 // (mm/s) Minimum feedrate. Set with M205 S.

20
config/examples/Alfawise/U20-bltouch/Configuration.h
View file

@ -1750,22 +1750,22 @@
// Disable axis steppers immediately when they're not being stepped. // Disable axis steppers immediately when they're not being stepped.
// WARNING: When motors turn off there is a chance of losing position accuracy! // WARNING: When motors turn off there is a chance of losing position accuracy!
#define DISABLE_X false //#define DISABLE_X
#define DISABLE_Y false //#define DISABLE_Y
#define DISABLE_Z false //#define DISABLE_Z
//#define DISABLE_I false //#define DISABLE_I
//#define DISABLE_J false //#define DISABLE_J
//#define DISABLE_K false //#define DISABLE_K
//#define DISABLE_U false //#define DISABLE_U
//#define DISABLE_V false //#define DISABLE_V
//#define DISABLE_W false //#define DISABLE_W
// Turn off the display blinking that warns about possible accuracy reduction // Turn off the display blinking that warns about possible accuracy reduction
//#define DISABLE_REDUCED_ACCURACY_WARNING //#define DISABLE_REDUCED_ACCURACY_WARNING
// @section extruder // @section extruder
#define DISABLE_E false // Disable the extruder when not stepping //#define DISABLE_E // Disable the extruder when not stepping
#define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled #define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled
// @section motion // @section motion

21
config/examples/Alfawise/U20-bltouch/Configuration_adv.h
View file

@ -1127,20 +1127,19 @@
/** /**
* Idle Stepper Shutdown * Idle Stepper Shutdown
* Set DISABLE_INACTIVE_? 'true' to shut down axis steppers after an idle period. * Enable DISABLE_INACTIVE_* to shut down axis steppers after an idle period.
* The Deactive Time can be overridden with M18 and M84. Set to 0 for No Timeout. * The Deactive Time can be overridden with M18 and M84. Set to 0 for No Timeout.
*/ */
#define DEFAULT_STEPPER_DEACTIVE_TIME 120 #define DEFAULT_STEPPER_DEACTIVE_TIME 120
#define DISABLE_INACTIVE_X true #define DISABLE_INACTIVE_X
#define DISABLE_INACTIVE_Y true #define DISABLE_INACTIVE_Y
#define DISABLE_INACTIVE_Z true // Set 'false' if the nozzle could fall onto your printed part! #define DISABLE_INACTIVE_Z // Disable if the nozzle could fall onto your printed part!
#define DISABLE_INACTIVE_I true //#define DISABLE_INACTIVE_I
#define DISABLE_INACTIVE_J true //#define DISABLE_INACTIVE_J
#define DISABLE_INACTIVE_K true //#define DISABLE_INACTIVE_K
#define DISABLE_INACTIVE_U true //#define DISABLE_INACTIVE_U
#define DISABLE_INACTIVE_V true //#define DISABLE_INACTIVE_V
#define DISABLE_INACTIVE_W true //#define DISABLE_INACTIVE_W
#define DISABLE_INACTIVE_E true
// Default Minimum Feedrates for printing and travel moves // Default Minimum Feedrates for printing and travel moves
#define DEFAULT_MINIMUMFEEDRATE 0.0 // (mm/s) Minimum feedrate. Set with M205 S. #define DEFAULT_MINIMUMFEEDRATE 0.0 // (mm/s) Minimum feedrate. Set with M205 S.

20
config/examples/Alfawise/U20/Configuration.h
View file

@ -1751,22 +1751,22 @@
// Disable axis steppers immediately when they're not being stepped. // Disable axis steppers immediately when they're not being stepped.
// WARNING: When motors turn off there is a chance of losing position accuracy! // WARNING: When motors turn off there is a chance of losing position accuracy!
#define DISABLE_X false //#define DISABLE_X
#define DISABLE_Y false //#define DISABLE_Y
#define DISABLE_Z false //#define DISABLE_Z
//#define DISABLE_I false //#define DISABLE_I
//#define DISABLE_J false //#define DISABLE_J
//#define DISABLE_K false //#define DISABLE_K
//#define DISABLE_U false //#define DISABLE_U
//#define DISABLE_V false //#define DISABLE_V
//#define DISABLE_W false //#define DISABLE_W
// Turn off the display blinking that warns about possible accuracy reduction // Turn off the display blinking that warns about possible accuracy reduction
//#define DISABLE_REDUCED_ACCURACY_WARNING //#define DISABLE_REDUCED_ACCURACY_WARNING
// @section extruder // @section extruder
#define DISABLE_E false // Disable the extruder when not stepping //#define DISABLE_E // Disable the extruder when not stepping
#define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled #define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled
// @section motion // @section motion

21
config/examples/Alfawise/U20/Configuration_adv.h
View file

@ -1118,20 +1118,19 @@
/** /**
* Idle Stepper Shutdown * Idle Stepper Shutdown
* Set DISABLE_INACTIVE_? 'true' to shut down axis steppers after an idle period. * Enable DISABLE_INACTIVE_* to shut down axis steppers after an idle period.
* The Deactive Time can be overridden with M18 and M84. Set to 0 for No Timeout. * The Deactive Time can be overridden with M18 and M84. Set to 0 for No Timeout.
*/ */
#define DEFAULT_STEPPER_DEACTIVE_TIME 120 #define DEFAULT_STEPPER_DEACTIVE_TIME 120
#define DISABLE_INACTIVE_X true #define DISABLE_INACTIVE_X
#define DISABLE_INACTIVE_Y true #define DISABLE_INACTIVE_Y
#define DISABLE_INACTIVE_Z true // Set 'false' if the nozzle could fall onto your printed part! #define DISABLE_INACTIVE_Z // Disable if the nozzle could fall onto your printed part!
#define DISABLE_INACTIVE_I true //#define DISABLE_INACTIVE_I
#define DISABLE_INACTIVE_J true //#define DISABLE_INACTIVE_J
#define DISABLE_INACTIVE_K true //#define DISABLE_INACTIVE_K
#define DISABLE_INACTIVE_U true //#define DISABLE_INACTIVE_U
#define DISABLE_INACTIVE_V true //#define DISABLE_INACTIVE_V
#define DISABLE_INACTIVE_W true //#define DISABLE_INACTIVE_W
#define DISABLE_INACTIVE_E true
// Default Minimum Feedrates for printing and travel moves // Default Minimum Feedrates for printing and travel moves
#define DEFAULT_MINIMUMFEEDRATE 0.0 // (mm/s) Minimum feedrate. Set with M205 S. #define DEFAULT_MINIMUMFEEDRATE 0.0 // (mm/s) Minimum feedrate. Set with M205 S.

20
config/examples/AliExpress/CL-260/Configuration.h
View file

@ -1681,22 +1681,22 @@
// Disable axis steppers immediately when they're not being stepped. // Disable axis steppers immediately when they're not being stepped.
// WARNING: When motors turn off there is a chance of losing position accuracy! // WARNING: When motors turn off there is a chance of losing position accuracy!
#define DISABLE_X false //#define DISABLE_X
#define DISABLE_Y false //#define DISABLE_Y
#define DISABLE_Z false //#define DISABLE_Z
//#define DISABLE_I false //#define DISABLE_I
//#define DISABLE_J false //#define DISABLE_J
//#define DISABLE_K false //#define DISABLE_K
//#define DISABLE_U false //#define DISABLE_U
//#define DISABLE_V false //#define DISABLE_V
//#define DISABLE_W false //#define DISABLE_W
// Turn off the display blinking that warns about possible accuracy reduction // Turn off the display blinking that warns about possible accuracy reduction
//#define DISABLE_REDUCED_ACCURACY_WARNING //#define DISABLE_REDUCED_ACCURACY_WARNING
// @section extruder // @section extruder
#define DISABLE_E false // Disable the extruder when not stepping //#define DISABLE_E // Disable the extruder when not stepping
#define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled #define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled
// @section motion // @section motion

20
config/examples/AliExpress/UM2pExt/Configuration.h
View file

@ -1682,22 +1682,22 @@
// Disable axis steppers immediately when they're not being stepped. // Disable axis steppers immediately when they're not being stepped.
// WARNING: When motors turn off there is a chance of losing position accuracy! // WARNING: When motors turn off there is a chance of losing position accuracy!
#define DISABLE_X false //#define DISABLE_X
#define DISABLE_Y false //#define DISABLE_Y
#define DISABLE_Z false //#define DISABLE_Z
//#define DISABLE_I false //#define DISABLE_I
//#define DISABLE_J false //#define DISABLE_J
//#define DISABLE_K false //#define DISABLE_K
//#define DISABLE_U false //#define DISABLE_U
//#define DISABLE_V false //#define DISABLE_V
//#define DISABLE_W false //#define DISABLE_W
// Turn off the display blinking that warns about possible accuracy reduction // Turn off the display blinking that warns about possible accuracy reduction
//#define DISABLE_REDUCED_ACCURACY_WARNING //#define DISABLE_REDUCED_ACCURACY_WARNING
// @section extruder // @section extruder
#define DISABLE_E false // Disable the extruder when not stepping //#define DISABLE_E // Disable the extruder when not stepping
#define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled #define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled
// @section motion // @section motion

21
config/examples/AliExpress/UM2pExt/Configuration_adv.h
View file

@ -1118,20 +1118,19 @@
/** /**
* Idle Stepper Shutdown * Idle Stepper Shutdown
* Set DISABLE_INACTIVE_? 'true' to shut down axis steppers after an idle period. * Enable DISABLE_INACTIVE_* to shut down axis steppers after an idle period.
* The Deactive Time can be overridden with M18 and M84. Set to 0 for No Timeout. * The Deactive Time can be overridden with M18 and M84. Set to 0 for No Timeout.
*/ */
#define DEFAULT_STEPPER_DEACTIVE_TIME 120 #define DEFAULT_STEPPER_DEACTIVE_TIME 120
#define DISABLE_INACTIVE_X true #define DISABLE_INACTIVE_X
#define DISABLE_INACTIVE_Y true #define DISABLE_INACTIVE_Y
#define DISABLE_INACTIVE_Z true // Set 'false' if the nozzle could fall onto your printed part! #define DISABLE_INACTIVE_Z // Disable if the nozzle could fall onto your printed part!
#define DISABLE_INACTIVE_I true //#define DISABLE_INACTIVE_I
#define DISABLE_INACTIVE_J true //#define DISABLE_INACTIVE_J
#define DISABLE_INACTIVE_K true //#define DISABLE_INACTIVE_K
#define DISABLE_INACTIVE_U true //#define DISABLE_INACTIVE_U
#define DISABLE_INACTIVE_V true //#define DISABLE_INACTIVE_V
#define DISABLE_INACTIVE_W true //#define DISABLE_INACTIVE_W
#define DISABLE_INACTIVE_E true
// Default Minimum Feedrates for printing and travel moves // Default Minimum Feedrates for printing and travel moves
#define DEFAULT_MINIMUMFEEDRATE 0.0 // (mm/s) Minimum feedrate. Set with M205 S. #define DEFAULT_MINIMUMFEEDRATE 0.0 // (mm/s) Minimum feedrate. Set with M205 S.

20
config/examples/Anet/A2/Configuration.h
View file

@ -1681,22 +1681,22 @@
// Disable axis steppers immediately when they're not being stepped. // Disable axis steppers immediately when they're not being stepped.
// WARNING: When motors turn off there is a chance of losing position accuracy! // WARNING: When motors turn off there is a chance of losing position accuracy!
#define DISABLE_X false //#define DISABLE_X
#define DISABLE_Y false //#define DISABLE_Y
#define DISABLE_Z false //#define DISABLE_Z
//#define DISABLE_I false //#define DISABLE_I
//#define DISABLE_J false //#define DISABLE_J
//#define DISABLE_K false //#define DISABLE_K
//#define DISABLE_U false //#define DISABLE_U
//#define DISABLE_V false //#define DISABLE_V
//#define DISABLE_W false //#define DISABLE_W
// Turn off the display blinking that warns about possible accuracy reduction // Turn off the display blinking that warns about possible accuracy reduction
//#define DISABLE_REDUCED_ACCURACY_WARNING //#define DISABLE_REDUCED_ACCURACY_WARNING
// @section extruder // @section extruder
#define DISABLE_E false // Disable the extruder when not stepping //#define DISABLE_E // Disable the extruder when not stepping
#define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled #define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled
// @section motion // @section motion

21
config/examples/Anet/A2/Configuration_adv.h
View file

@ -1118,20 +1118,19 @@
/** /**
* Idle Stepper Shutdown * Idle Stepper Shutdown
* Set DISABLE_INACTIVE_? 'true' to shut down axis steppers after an idle period. * Enable DISABLE_INACTIVE_* to shut down axis steppers after an idle period.
* The Deactive Time can be overridden with M18 and M84. Set to 0 for No Timeout. * The Deactive Time can be overridden with M18 and M84. Set to 0 for No Timeout.
*/ */
#define DEFAULT_STEPPER_DEACTIVE_TIME 120 #define DEFAULT_STEPPER_DEACTIVE_TIME 120
#define DISABLE_INACTIVE_X true #define DISABLE_INACTIVE_X
#define DISABLE_INACTIVE_Y true #define DISABLE_INACTIVE_Y
#define DISABLE_INACTIVE_Z true // Set 'false' if the nozzle could fall onto your printed part! #define DISABLE_INACTIVE_Z // Disable if the nozzle could fall onto your printed part!
#define DISABLE_INACTIVE_I true //#define DISABLE_INACTIVE_I
#define DISABLE_INACTIVE_J true //#define DISABLE_INACTIVE_J
#define DISABLE_INACTIVE_K true //#define DISABLE_INACTIVE_K
#define DISABLE_INACTIVE_U true //#define DISABLE_INACTIVE_U
#define DISABLE_INACTIVE_V true //#define DISABLE_INACTIVE_V
#define DISABLE_INACTIVE_W true //#define DISABLE_INACTIVE_W
#define DISABLE_INACTIVE_E true
// Default Minimum Feedrates for printing and travel moves // Default Minimum Feedrates for printing and travel moves
#define DEFAULT_MINIMUMFEEDRATE 0.0 // (mm/s) Minimum feedrate. Set with M205 S. #define DEFAULT_MINIMUMFEEDRATE 0.0 // (mm/s) Minimum feedrate. Set with M205 S.

20
config/examples/Anet/A2plus/Configuration.h
View file

@ -1681,22 +1681,22 @@
// Disable axis steppers immediately when they're not being stepped. // Disable axis steppers immediately when they're not being stepped.
// WARNING: When motors turn off there is a chance of losing position accuracy! // WARNING: When motors turn off there is a chance of losing position accuracy!
#define DISABLE_X false //#define DISABLE_X
#define DISABLE_Y false //#define DISABLE_Y
#define DISABLE_Z false //#define DISABLE_Z
//#define DISABLE_I false //#define DISABLE_I
//#define DISABLE_J false //#define DISABLE_J
//#define DISABLE_K false //#define DISABLE_K
//#define DISABLE_U false //#define DISABLE_U
//#define DISABLE_V false //#define DISABLE_V
//#define DISABLE_W false //#define DISABLE_W
// Turn off the display blinking that warns about possible accuracy reduction // Turn off the display blinking that warns about possible accuracy reduction
//#define DISABLE_REDUCED_ACCURACY_WARNING //#define DISABLE_REDUCED_ACCURACY_WARNING
// @section extruder // @section extruder
#define DISABLE_E false // Disable the extruder when not stepping //#define DISABLE_E // Disable the extruder when not stepping
#define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled #define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled
// @section motion // @section motion

21
config/examples/Anet/A2plus/Configuration_adv.h
View file

@ -1118,20 +1118,19 @@
/** /**
* Idle Stepper Shutdown * Idle Stepper Shutdown
* Set DISABLE_INACTIVE_? 'true' to shut down axis steppers after an idle period. * Enable DISABLE_INACTIVE_* to shut down axis steppers after an idle period.
* The Deactive Time can be overridden with M18 and M84. Set to 0 for No Timeout. * The Deactive Time can be overridden with M18 and M84. Set to 0 for No Timeout.
*/ */
#define DEFAULT_STEPPER_DEACTIVE_TIME 120 #define DEFAULT_STEPPER_DEACTIVE_TIME 120
#define DISABLE_INACTIVE_X true #define DISABLE_INACTIVE_X
#define DISABLE_INACTIVE_Y true #define DISABLE_INACTIVE_Y
#define DISABLE_INACTIVE_Z true // Set 'false' if the nozzle could fall onto your printed part! #define DISABLE_INACTIVE_Z // Disable if the nozzle could fall onto your printed part!
#define DISABLE_INACTIVE_I true //#define DISABLE_INACTIVE_I
#define DISABLE_INACTIVE_J true //#define DISABLE_INACTIVE_J
#define DISABLE_INACTIVE_K true //#define DISABLE_INACTIVE_K
#define DISABLE_INACTIVE_U true //#define DISABLE_INACTIVE_U
#define DISABLE_INACTIVE_V true //#define DISABLE_INACTIVE_V
#define DISABLE_INACTIVE_W true //#define DISABLE_INACTIVE_W
#define DISABLE_INACTIVE_E true
// Default Minimum Feedrates for printing and travel moves // Default Minimum Feedrates for printing and travel moves
#define DEFAULT_MINIMUMFEEDRATE 0.0 // (mm/s) Minimum feedrate. Set with M205 S. #define DEFAULT_MINIMUMFEEDRATE 0.0 // (mm/s) Minimum feedrate. Set with M205 S.

20
config/examples/Anet/A6/Configuration.h
View file

@ -1717,22 +1717,22 @@
// Disable axis steppers immediately when they're not being stepped. // Disable axis steppers immediately when they're not being stepped.
// WARNING: When motors turn off there is a chance of losing position accuracy! // WARNING: When motors turn off there is a chance of losing position accuracy!
#define DISABLE_X false //#define DISABLE_X
#define DISABLE_Y false //#define DISABLE_Y
#define DISABLE_Z false //#define DISABLE_Z
//#define DISABLE_I false //#define DISABLE_I
//#define DISABLE_J false //#define DISABLE_J
//#define DISABLE_K false //#define DISABLE_K
//#define DISABLE_U false //#define DISABLE_U
//#define DISABLE_V false //#define DISABLE_V
//#define DISABLE_W false //#define DISABLE_W
// Turn off the display blinking that warns about possible accuracy reduction // Turn off the display blinking that warns about possible accuracy reduction
//#define DISABLE_REDUCED_ACCURACY_WARNING //#define DISABLE_REDUCED_ACCURACY_WARNING
// @section extruder // @section extruder
#define DISABLE_E false // Disable the extruder when not stepping //#define DISABLE_E // Disable the extruder when not stepping
#define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled #define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled
// @section motion // @section motion

21
config/examples/Anet/A6/Configuration_adv.h
View file

@ -1118,20 +1118,19 @@
/** /**
* Idle Stepper Shutdown * Idle Stepper Shutdown
* Set DISABLE_INACTIVE_? 'true' to shut down axis steppers after an idle period. * Enable DISABLE_INACTIVE_* to shut down axis steppers after an idle period.
* The Deactive Time can be overridden with M18 and M84. Set to 0 for No Timeout. * The Deactive Time can be overridden with M18 and M84. Set to 0 for No Timeout.
*/ */
#define DEFAULT_STEPPER_DEACTIVE_TIME 120 #define DEFAULT_STEPPER_DEACTIVE_TIME 120
#define DISABLE_INACTIVE_X true #define DISABLE_INACTIVE_X
#define DISABLE_INACTIVE_Y true #define DISABLE_INACTIVE_Y
#define DISABLE_INACTIVE_Z true // Set 'false' if the nozzle could fall onto your printed part! #define DISABLE_INACTIVE_Z // Disable if the nozzle could fall onto your printed part!
#define DISABLE_INACTIVE_I true //#define DISABLE_INACTIVE_I
#define DISABLE_INACTIVE_J true //#define DISABLE_INACTIVE_J
#define DISABLE_INACTIVE_K true //#define DISABLE_INACTIVE_K
#define DISABLE_INACTIVE_U true //#define DISABLE_INACTIVE_U
#define DISABLE_INACTIVE_V true //#define DISABLE_INACTIVE_V
#define DISABLE_INACTIVE_W true //#define DISABLE_INACTIVE_W
#define DISABLE_INACTIVE_E true
// Default Minimum Feedrates for printing and travel moves // Default Minimum Feedrates for printing and travel moves
#define DEFAULT_MINIMUMFEEDRATE 0.0 // (mm/s) Minimum feedrate. Set with M205 S. #define DEFAULT_MINIMUMFEEDRATE 0.0 // (mm/s) Minimum feedrate. Set with M205 S.

20
config/examples/Anet/A8/Configuration.h
View file

@ -1684,22 +1684,22 @@
// Disable axis steppers immediately when they're not being stepped. // Disable axis steppers immediately when they're not being stepped.
// WARNING: When motors turn off there is a chance of losing position accuracy! // WARNING: When motors turn off there is a chance of losing position accuracy!
#define DISABLE_X false //#define DISABLE_X
#define DISABLE_Y false //#define DISABLE_Y
#define DISABLE_Z false //#define DISABLE_Z
//#define DISABLE_I false //#define DISABLE_I
//#define DISABLE_J false //#define DISABLE_J
//#define DISABLE_K false //#define DISABLE_K
//#define DISABLE_U false //#define DISABLE_U
//#define DISABLE_V false //#define DISABLE_V
//#define DISABLE_W false //#define DISABLE_W
// Turn off the display blinking that warns about possible accuracy reduction // Turn off the display blinking that warns about possible accuracy reduction
//#define DISABLE_REDUCED_ACCURACY_WARNING //#define DISABLE_REDUCED_ACCURACY_WARNING
// @section extruder // @section extruder
#define DISABLE_E false // Disable the extruder when not stepping //#define DISABLE_E // Disable the extruder when not stepping
#define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled #define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled
// @section motion // @section motion

21
config/examples/Anet/A8/Configuration_adv.h
View file

@ -1118,20 +1118,19 @@
/** /**
* Idle Stepper Shutdown * Idle Stepper Shutdown
* Set DISABLE_INACTIVE_? 'true' to shut down axis steppers after an idle period. * Enable DISABLE_INACTIVE_* to shut down axis steppers after an idle period.
* The Deactive Time can be overridden with M18 and M84. Set to 0 for No Timeout. * The Deactive Time can be overridden with M18 and M84. Set to 0 for No Timeout.
*/ */
#define DEFAULT_STEPPER_DEACTIVE_TIME 120 #define DEFAULT_STEPPER_DEACTIVE_TIME 120
#define DISABLE_INACTIVE_X true #define DISABLE_INACTIVE_X
#define DISABLE_INACTIVE_Y true #define DISABLE_INACTIVE_Y
#define DISABLE_INACTIVE_Z true // Set 'false' if the nozzle could fall onto your printed part! #define DISABLE_INACTIVE_Z // Disable if the nozzle could fall onto your printed part!
#define DISABLE_INACTIVE_I true //#define DISABLE_INACTIVE_I
#define DISABLE_INACTIVE_J true //#define DISABLE_INACTIVE_J
#define DISABLE_INACTIVE_K true //#define DISABLE_INACTIVE_K
#define DISABLE_INACTIVE_U true //#define DISABLE_INACTIVE_U
#define DISABLE_INACTIVE_V true //#define DISABLE_INACTIVE_V
#define DISABLE_INACTIVE_W true //#define DISABLE_INACTIVE_W
#define DISABLE_INACTIVE_E true
// Default Minimum Feedrates for printing and travel moves // Default Minimum Feedrates for printing and travel moves
#define DEFAULT_MINIMUMFEEDRATE 0.0 // (mm/s) Minimum feedrate. Set with M205 S. #define DEFAULT_MINIMUMFEEDRATE 0.0 // (mm/s) Minimum feedrate. Set with M205 S.

20
config/examples/Anet/A8plus/Configuration.h
View file

@ -1683,22 +1683,22 @@
// Disable axis steppers immediately when they're not being stepped. // Disable axis steppers immediately when they're not being stepped.
// WARNING: When motors turn off there is a chance of losing position accuracy! // WARNING: When motors turn off there is a chance of losing position accuracy!
#define DISABLE_X false //#define DISABLE_X
#define DISABLE_Y false //#define DISABLE_Y
#define DISABLE_Z false //#define DISABLE_Z
//#define DISABLE_I false //#define DISABLE_I
//#define DISABLE_J false //#define DISABLE_J
//#define DISABLE_K false //#define DISABLE_K
//#define DISABLE_U false //#define DISABLE_U
//#define DISABLE_V false //#define DISABLE_V
//#define DISABLE_W false //#define DISABLE_W
// Turn off the display blinking that warns about possible accuracy reduction // Turn off the display blinking that warns about possible accuracy reduction
//#define DISABLE_REDUCED_ACCURACY_WARNING //#define DISABLE_REDUCED_ACCURACY_WARNING
// @section extruder // @section extruder
#define DISABLE_E false // Disable the extruder when not stepping //#define DISABLE_E // Disable the extruder when not stepping
#define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled #define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled
// @section motion // @section motion

21
config/examples/Anet/A8plus/Configuration_adv.h
View file

@ -1118,20 +1118,19 @@
/** /**
* Idle Stepper Shutdown * Idle Stepper Shutdown
* Set DISABLE_INACTIVE_? 'true' to shut down axis steppers after an idle period. * Enable DISABLE_INACTIVE_* to shut down axis steppers after an idle period.
* The Deactive Time can be overridden with M18 and M84. Set to 0 for No Timeout. * The Deactive Time can be overridden with M18 and M84. Set to 0 for No Timeout.
*/ */
#define DEFAULT_STEPPER_DEACTIVE_TIME 120 #define DEFAULT_STEPPER_DEACTIVE_TIME 120
#define DISABLE_INACTIVE_X true #define DISABLE_INACTIVE_X
#define DISABLE_INACTIVE_Y true #define DISABLE_INACTIVE_Y
#define DISABLE_INACTIVE_Z true // Set 'false' if the nozzle could fall onto your printed part! #define DISABLE_INACTIVE_Z // Disable if the nozzle could fall onto your printed part!
#define DISABLE_INACTIVE_I true //#define DISABLE_INACTIVE_I
#define DISABLE_INACTIVE_J true //#define DISABLE_INACTIVE_J
#define DISABLE_INACTIVE_K true //#define DISABLE_INACTIVE_K
#define DISABLE_INACTIVE_U true //#define DISABLE_INACTIVE_U
#define DISABLE_INACTIVE_V true //#define DISABLE_INACTIVE_V
#define DISABLE_INACTIVE_W true //#define DISABLE_INACTIVE_W
#define DISABLE_INACTIVE_E true
// Default Minimum Feedrates for printing and travel moves // Default Minimum Feedrates for printing and travel moves
#define DEFAULT_MINIMUMFEEDRATE 0.0 // (mm/s) Minimum feedrate. Set with M205 S. #define DEFAULT_MINIMUMFEEDRATE 0.0 // (mm/s) Minimum feedrate. Set with M205 S.

20
config/examples/Anet/A9/Configuration.h
View file

@ -1681,22 +1681,22 @@
// Disable axis steppers immediately when they're not being stepped. // Disable axis steppers immediately when they're not being stepped.
// WARNING: When motors turn off there is a chance of losing position accuracy! // WARNING: When motors turn off there is a chance of losing position accuracy!
#define DISABLE_X false //#define DISABLE_X
#define DISABLE_Y false //#define DISABLE_Y
#define DISABLE_Z false //#define DISABLE_Z
//#define DISABLE_I false //#define DISABLE_I
//#define DISABLE_J false //#define DISABLE_J
//#define DISABLE_K false //#define DISABLE_K
//#define DISABLE_U false //#define DISABLE_U
//#define DISABLE_V false //#define DISABLE_V
//#define DISABLE_W false //#define DISABLE_W
// Turn off the display blinking that warns about possible accuracy reduction // Turn off the display blinking that warns about possible accuracy reduction
//#define DISABLE_REDUCED_ACCURACY_WARNING //#define DISABLE_REDUCED_ACCURACY_WARNING
// @section extruder // @section extruder
#define DISABLE_E false // Disable the extruder when not stepping //#define DISABLE_E // Disable the extruder when not stepping
#define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled #define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled
// @section motion // @section motion

21
config/examples/Anet/A9/Configuration_adv.h
View file

@ -1118,20 +1118,19 @@
/** /**
* Idle Stepper Shutdown * Idle Stepper Shutdown
* Set DISABLE_INACTIVE_? 'true' to shut down axis steppers after an idle period. * Enable DISABLE_INACTIVE_* to shut down axis steppers after an idle period.
* The Deactive Time can be overridden with M18 and M84. Set to 0 for No Timeout. * The Deactive Time can be overridden with M18 and M84. Set to 0 for No Timeout.
*/ */
#define DEFAULT_STEPPER_DEACTIVE_TIME 120 #define DEFAULT_STEPPER_DEACTIVE_TIME 120
#define DISABLE_INACTIVE_X true #define DISABLE_INACTIVE_X
#define DISABLE_INACTIVE_Y true #define DISABLE_INACTIVE_Y
#define DISABLE_INACTIVE_Z true // Set 'false' if the nozzle could fall onto your printed part! #define DISABLE_INACTIVE_Z // Disable if the nozzle could fall onto your printed part!
#define DISABLE_INACTIVE_I true //#define DISABLE_INACTIVE_I
#define DISABLE_INACTIVE_J true //#define DISABLE_INACTIVE_J
#define DISABLE_INACTIVE_K true //#define DISABLE_INACTIVE_K
#define DISABLE_INACTIVE_U true //#define DISABLE_INACTIVE_U
#define DISABLE_INACTIVE_V true //#define DISABLE_INACTIVE_V
#define DISABLE_INACTIVE_W true //#define DISABLE_INACTIVE_W
#define DISABLE_INACTIVE_E true
// Default Minimum Feedrates for printing and travel moves // Default Minimum Feedrates for printing and travel moves
#define DEFAULT_MINIMUMFEEDRATE 0.0 // (mm/s) Minimum feedrate. Set with M205 S. #define DEFAULT_MINIMUMFEEDRATE 0.0 // (mm/s) Minimum feedrate. Set with M205 S.

20
config/examples/Anet/E10/Configuration.h
View file

@ -1681,22 +1681,22 @@
// Disable axis steppers immediately when they're not being stepped. // Disable axis steppers immediately when they're not being stepped.
// WARNING: When motors turn off there is a chance of losing position accuracy! // WARNING: When motors turn off there is a chance of losing position accuracy!
#define DISABLE_X false //#define DISABLE_X
#define DISABLE_Y false //#define DISABLE_Y
#define DISABLE_Z false //#define DISABLE_Z
//#define DISABLE_I false //#define DISABLE_I
//#define DISABLE_J false //#define DISABLE_J
//#define DISABLE_K false //#define DISABLE_K
//#define DISABLE_U false //#define DISABLE_U
//#define DISABLE_V false //#define DISABLE_V
//#define DISABLE_W false //#define DISABLE_W
// Turn off the display blinking that warns about possible accuracy reduction // Turn off the display blinking that warns about possible accuracy reduction
//#define DISABLE_REDUCED_ACCURACY_WARNING //#define DISABLE_REDUCED_ACCURACY_WARNING
// @section extruder // @section extruder
#define DISABLE_E false // Disable the extruder when not stepping //#define DISABLE_E // Disable the extruder when not stepping
#define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled #define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled
// @section motion // @section motion

21
config/examples/Anet/E10/Configuration_adv.h
View file

@ -1118,20 +1118,19 @@
/** /**
* Idle Stepper Shutdown * Idle Stepper Shutdown
* Set DISABLE_INACTIVE_? 'true' to shut down axis steppers after an idle period. * Enable DISABLE_INACTIVE_* to shut down axis steppers after an idle period.
* The Deactive Time can be overridden with M18 and M84. Set to 0 for No Timeout. * The Deactive Time can be overridden with M18 and M84. Set to 0 for No Timeout.
*/ */
#define DEFAULT_STEPPER_DEACTIVE_TIME 120 #define DEFAULT_STEPPER_DEACTIVE_TIME 120
#define DISABLE_INACTIVE_X true #define DISABLE_INACTIVE_X
#define DISABLE_INACTIVE_Y true #define DISABLE_INACTIVE_Y
#define DISABLE_INACTIVE_Z true // Set 'false' if the nozzle could fall onto your printed part! #define DISABLE_INACTIVE_Z // Disable if the nozzle could fall onto your printed part!
#define DISABLE_INACTIVE_I true //#define DISABLE_INACTIVE_I
#define DISABLE_INACTIVE_J true //#define DISABLE_INACTIVE_J
#define DISABLE_INACTIVE_K true //#define DISABLE_INACTIVE_K
#define DISABLE_INACTIVE_U true //#define DISABLE_INACTIVE_U
#define DISABLE_INACTIVE_V true //#define DISABLE_INACTIVE_V
#define DISABLE_INACTIVE_W true //#define DISABLE_INACTIVE_W
#define DISABLE_INACTIVE_E true
// Default Minimum Feedrates for printing and travel moves // Default Minimum Feedrates for printing and travel moves
#define DEFAULT_MINIMUMFEEDRATE 0.0 // (mm/s) Minimum feedrate. Set with M205 S. #define DEFAULT_MINIMUMFEEDRATE 0.0 // (mm/s) Minimum feedrate. Set with M205 S.

20
config/examples/Anet/E16/BTT SKR 1.3/Configuration.h
View file

@ -1683,22 +1683,22 @@
// Disable axis steppers immediately when they're not being stepped. // Disable axis steppers immediately when they're not being stepped.
// WARNING: When motors turn off there is a chance of losing position accuracy! // WARNING: When motors turn off there is a chance of losing position accuracy!
#define DISABLE_X false //#define DISABLE_X
#define DISABLE_Y false //#define DISABLE_Y
#define DISABLE_Z false //#define DISABLE_Z
//#define DISABLE_I false //#define DISABLE_I
//#define DISABLE_J false //#define DISABLE_J
//#define DISABLE_K false //#define DISABLE_K
//#define DISABLE_U false //#define DISABLE_U
//#define DISABLE_V false //#define DISABLE_V
//#define DISABLE_W false //#define DISABLE_W
// Turn off the display blinking that warns about possible accuracy reduction // Turn off the display blinking that warns about possible accuracy reduction
//#define DISABLE_REDUCED_ACCURACY_WARNING //#define DISABLE_REDUCED_ACCURACY_WARNING
// @section extruder // @section extruder
#define DISABLE_E false // Disable the extruder when not stepping //#define DISABLE_E // Disable the extruder when not stepping
#define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled #define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled
// @section motion // @section motion

21
config/examples/Anet/E16/BTT SKR 1.3/Configuration_adv.h
View file

@ -1118,20 +1118,19 @@
/** /**
* Idle Stepper Shutdown * Idle Stepper Shutdown
* Set DISABLE_INACTIVE_? 'true' to shut down axis steppers after an idle period. * Enable DISABLE_INACTIVE_* to shut down axis steppers after an idle period.
* The Deactive Time can be overridden with M18 and M84. Set to 0 for No Timeout. * The Deactive Time can be overridden with M18 and M84. Set to 0 for No Timeout.
*/ */
#define DEFAULT_STEPPER_DEACTIVE_TIME 120 #define DEFAULT_STEPPER_DEACTIVE_TIME 120
#define DISABLE_INACTIVE_X true #define DISABLE_INACTIVE_X
#define DISABLE_INACTIVE_Y true #define DISABLE_INACTIVE_Y
#define DISABLE_INACTIVE_Z true // Set 'false' if the nozzle could fall onto your printed part! #define DISABLE_INACTIVE_Z // Disable if the nozzle could fall onto your printed part!
#define DISABLE_INACTIVE_I true //#define DISABLE_INACTIVE_I
#define DISABLE_INACTIVE_J true //#define DISABLE_INACTIVE_J
#define DISABLE_INACTIVE_K true //#define DISABLE_INACTIVE_K
#define DISABLE_INACTIVE_U true //#define DISABLE_INACTIVE_U
#define DISABLE_INACTIVE_V true //#define DISABLE_INACTIVE_V
#define DISABLE_INACTIVE_W true //#define DISABLE_INACTIVE_W
#define DISABLE_INACTIVE_E true
// Default Minimum Feedrates for printing and travel moves // Default Minimum Feedrates for printing and travel moves
#define DEFAULT_MINIMUMFEEDRATE 0.0 // (mm/s) Minimum feedrate. Set with M205 S. #define DEFAULT_MINIMUMFEEDRATE 0.0 // (mm/s) Minimum feedrate. Set with M205 S.

20
config/examples/Anet/E16/Stock/Configuration.h
View file

@ -1683,22 +1683,22 @@
// Disable axis steppers immediately when they're not being stepped. // Disable axis steppers immediately when they're not being stepped.
// WARNING: When motors turn off there is a chance of losing position accuracy! // WARNING: When motors turn off there is a chance of losing position accuracy!
#define DISABLE_X false //#define DISABLE_X
#define DISABLE_Y false //#define DISABLE_Y
#define DISABLE_Z false //#define DISABLE_Z
//#define DISABLE_I false //#define DISABLE_I
//#define DISABLE_J false //#define DISABLE_J
//#define DISABLE_K false //#define DISABLE_K
//#define DISABLE_U false //#define DISABLE_U
//#define DISABLE_V false //#define DISABLE_V
//#define DISABLE_W false //#define DISABLE_W
// Turn off the display blinking that warns about possible accuracy reduction // Turn off the display blinking that warns about possible accuracy reduction
//#define DISABLE_REDUCED_ACCURACY_WARNING //#define DISABLE_REDUCED_ACCURACY_WARNING
// @section extruder // @section extruder
#define DISABLE_E false // Disable the extruder when not stepping //#define DISABLE_E // Disable the extruder when not stepping
#define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled #define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled
// @section motion // @section motion

21
config/examples/Anet/E16/Stock/Configuration_adv.h
View file

@ -1118,20 +1118,19 @@
/** /**
* Idle Stepper Shutdown * Idle Stepper Shutdown
* Set DISABLE_INACTIVE_? 'true' to shut down axis steppers after an idle period. * Enable DISABLE_INACTIVE_* to shut down axis steppers after an idle period.
* The Deactive Time can be overridden with M18 and M84. Set to 0 for No Timeout. * The Deactive Time can be overridden with M18 and M84. Set to 0 for No Timeout.
*/ */
#define DEFAULT_STEPPER_DEACTIVE_TIME 120 #define DEFAULT_STEPPER_DEACTIVE_TIME 120
#define DISABLE_INACTIVE_X true #define DISABLE_INACTIVE_X
#define DISABLE_INACTIVE_Y true #define DISABLE_INACTIVE_Y
#define DISABLE_INACTIVE_Z true // Set 'false' if the nozzle could fall onto your printed part! #define DISABLE_INACTIVE_Z // Disable if the nozzle could fall onto your printed part!
#define DISABLE_INACTIVE_I true //#define DISABLE_INACTIVE_I
#define DISABLE_INACTIVE_J true //#define DISABLE_INACTIVE_J
#define DISABLE_INACTIVE_K true //#define DISABLE_INACTIVE_K
#define DISABLE_INACTIVE_U true //#define DISABLE_INACTIVE_U
#define DISABLE_INACTIVE_V true //#define DISABLE_INACTIVE_V
#define DISABLE_INACTIVE_W true //#define DISABLE_INACTIVE_W
#define DISABLE_INACTIVE_E true
// Default Minimum Feedrates for printing and travel moves // Default Minimum Feedrates for printing and travel moves
#define DEFAULT_MINIMUMFEEDRATE 0.0 // (mm/s) Minimum feedrate. Set with M205 S. #define DEFAULT_MINIMUMFEEDRATE 0.0 // (mm/s) Minimum feedrate. Set with M205 S.

20
config/examples/Anet/ET4+/Configuration.h
View file

@ -1687,22 +1687,22 @@
// Disable axis steppers immediately when they're not being stepped. // Disable axis steppers immediately when they're not being stepped.
// WARNING: When motors turn off there is a chance of losing position accuracy! // WARNING: When motors turn off there is a chance of losing position accuracy!
#define DISABLE_X false //#define DISABLE_X
#define DISABLE_Y false //#define DISABLE_Y
#define DISABLE_Z false //#define DISABLE_Z
//#define DISABLE_I false //#define DISABLE_I
//#define DISABLE_J false //#define DISABLE_J
//#define DISABLE_K false //#define DISABLE_K
//#define DISABLE_U false //#define DISABLE_U
//#define DISABLE_V false //#define DISABLE_V
//#define DISABLE_W false //#define DISABLE_W
// Turn off the display blinking that warns about possible accuracy reduction // Turn off the display blinking that warns about possible accuracy reduction
//#define DISABLE_REDUCED_ACCURACY_WARNING //#define DISABLE_REDUCED_ACCURACY_WARNING
// @section extruder // @section extruder
#define DISABLE_E false // Disable the extruder when not stepping //#define DISABLE_E // Disable the extruder when not stepping
#define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled #define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled
// @section motion // @section motion

21
config/examples/Anet/ET4+/Configuration_adv.h
View file

@ -1118,20 +1118,19 @@
/** /**
* Idle Stepper Shutdown * Idle Stepper Shutdown
* Set DISABLE_INACTIVE_? 'true' to shut down axis steppers after an idle period. * Enable DISABLE_INACTIVE_* to shut down axis steppers after an idle period.
* The Deactive Time can be overridden with M18 and M84. Set to 0 for No Timeout. * The Deactive Time can be overridden with M18 and M84. Set to 0 for No Timeout.
*/ */
#define DEFAULT_STEPPER_DEACTIVE_TIME 120 #define DEFAULT_STEPPER_DEACTIVE_TIME 120
#define DISABLE_INACTIVE_X true #define DISABLE_INACTIVE_X
#define DISABLE_INACTIVE_Y true #define DISABLE_INACTIVE_Y
#define DISABLE_INACTIVE_Z true // Set 'false' if the nozzle could fall onto your printed part! #define DISABLE_INACTIVE_Z // Disable if the nozzle could fall onto your printed part!
#define DISABLE_INACTIVE_I true //#define DISABLE_INACTIVE_I
#define DISABLE_INACTIVE_J true //#define DISABLE_INACTIVE_J
#define DISABLE_INACTIVE_K true //#define DISABLE_INACTIVE_K
#define DISABLE_INACTIVE_U true //#define DISABLE_INACTIVE_U
#define DISABLE_INACTIVE_V true //#define DISABLE_INACTIVE_V
#define DISABLE_INACTIVE_W true //#define DISABLE_INACTIVE_W
#define DISABLE_INACTIVE_E true
// Default Minimum Feedrates for printing and travel moves // Default Minimum Feedrates for printing and travel moves
#define DEFAULT_MINIMUMFEEDRATE 0.0 // (mm/s) Minimum feedrate. Set with M205 S. #define DEFAULT_MINIMUMFEEDRATE 0.0 // (mm/s) Minimum feedrate. Set with M205 S.

20
config/examples/Anet/ET4-Pro/Configuration.h
View file

@ -1687,22 +1687,22 @@
// Disable axis steppers immediately when they're not being stepped. // Disable axis steppers immediately when they're not being stepped.
// WARNING: When motors turn off there is a chance of losing position accuracy! // WARNING: When motors turn off there is a chance of losing position accuracy!
#define DISABLE_X false //#define DISABLE_X
#define DISABLE_Y false //#define DISABLE_Y
#define DISABLE_Z false //#define DISABLE_Z
//#define DISABLE_I false //#define DISABLE_I
//#define DISABLE_J false //#define DISABLE_J
//#define DISABLE_K false //#define DISABLE_K
//#define DISABLE_U false //#define DISABLE_U
//#define DISABLE_V false //#define DISABLE_V
//#define DISABLE_W false //#define DISABLE_W
// Turn off the display blinking that warns about possible accuracy reduction // Turn off the display blinking that warns about possible accuracy reduction
//#define DISABLE_REDUCED_ACCURACY_WARNING //#define DISABLE_REDUCED_ACCURACY_WARNING
// @section extruder // @section extruder
#define DISABLE_E false // Disable the extruder when not stepping //#define DISABLE_E // Disable the extruder when not stepping
#define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled #define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled
// @section motion // @section motion

21
config/examples/Anet/ET4-Pro/Configuration_adv.h
View file

@ -1118,20 +1118,19 @@
/** /**
* Idle Stepper Shutdown * Idle Stepper Shutdown
* Set DISABLE_INACTIVE_? 'true' to shut down axis steppers after an idle period. * Enable DISABLE_INACTIVE_* to shut down axis steppers after an idle period.
* The Deactive Time can be overridden with M18 and M84. Set to 0 for No Timeout. * The Deactive Time can be overridden with M18 and M84. Set to 0 for No Timeout.
*/ */
#define DEFAULT_STEPPER_DEACTIVE_TIME 120 #define DEFAULT_STEPPER_DEACTIVE_TIME 120
#define DISABLE_INACTIVE_X true #define DISABLE_INACTIVE_X
#define DISABLE_INACTIVE_Y true #define DISABLE_INACTIVE_Y
#define DISABLE_INACTIVE_Z true // Set 'false' if the nozzle could fall onto your printed part! #define DISABLE_INACTIVE_Z // Disable if the nozzle could fall onto your printed part!
#define DISABLE_INACTIVE_I true //#define DISABLE_INACTIVE_I
#define DISABLE_INACTIVE_J true //#define DISABLE_INACTIVE_J
#define DISABLE_INACTIVE_K true //#define DISABLE_INACTIVE_K
#define DISABLE_INACTIVE_U true //#define DISABLE_INACTIVE_U
#define DISABLE_INACTIVE_V true //#define DISABLE_INACTIVE_V
#define DISABLE_INACTIVE_W true //#define DISABLE_INACTIVE_W
#define DISABLE_INACTIVE_E true
// Default Minimum Feedrates for printing and travel moves // Default Minimum Feedrates for printing and travel moves
#define DEFAULT_MINIMUMFEEDRATE 0.0 // (mm/s) Minimum feedrate. Set with M205 S. #define DEFAULT_MINIMUMFEEDRATE 0.0 // (mm/s) Minimum feedrate. Set with M205 S.

20
config/examples/Anet/ET4/Configuration.h
View file

@ -1687,22 +1687,22 @@
// Disable axis steppers immediately when they're not being stepped. // Disable axis steppers immediately when they're not being stepped.
// WARNING: When motors turn off there is a chance of losing position accuracy! // WARNING: When motors turn off there is a chance of losing position accuracy!
#define DISABLE_X false //#define DISABLE_X
#define DISABLE_Y false //#define DISABLE_Y
#define DISABLE_Z false //#define DISABLE_Z
//#define DISABLE_I false //#define DISABLE_I
//#define DISABLE_J false //#define DISABLE_J
//#define DISABLE_K false //#define DISABLE_K
//#define DISABLE_U false //#define DISABLE_U
//#define DISABLE_V false //#define DISABLE_V
//#define DISABLE_W false //#define DISABLE_W
// Turn off the display blinking that warns about possible accuracy reduction // Turn off the display blinking that warns about possible accuracy reduction
//#define DISABLE_REDUCED_ACCURACY_WARNING //#define DISABLE_REDUCED_ACCURACY_WARNING
// @section extruder // @section extruder
#define DISABLE_E false // Disable the extruder when not stepping //#define DISABLE_E // Disable the extruder when not stepping
#define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled #define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled
// @section motion // @section motion

21
config/examples/Anet/ET4/Configuration_adv.h
View file

@ -1118,20 +1118,19 @@
/** /**
* Idle Stepper Shutdown * Idle Stepper Shutdown
* Set DISABLE_INACTIVE_? 'true' to shut down axis steppers after an idle period. * Enable DISABLE_INACTIVE_* to shut down axis steppers after an idle period.
* The Deactive Time can be overridden with M18 and M84. Set to 0 for No Timeout. * The Deactive Time can be overridden with M18 and M84. Set to 0 for No Timeout.
*/ */
#define DEFAULT_STEPPER_DEACTIVE_TIME 120 #define DEFAULT_STEPPER_DEACTIVE_TIME 120
#define DISABLE_INACTIVE_X true #define DISABLE_INACTIVE_X
#define DISABLE_INACTIVE_Y true #define DISABLE_INACTIVE_Y
#define DISABLE_INACTIVE_Z true // Set 'false' if the nozzle could fall onto your printed part! #define DISABLE_INACTIVE_Z // Disable if the nozzle could fall onto your printed part!
#define DISABLE_INACTIVE_I true //#define DISABLE_INACTIVE_I
#define DISABLE_INACTIVE_J true //#define DISABLE_INACTIVE_J
#define DISABLE_INACTIVE_K true //#define DISABLE_INACTIVE_K
#define DISABLE_INACTIVE_U true //#define DISABLE_INACTIVE_U
#define DISABLE_INACTIVE_V true //#define DISABLE_INACTIVE_V
#define DISABLE_INACTIVE_W true //#define DISABLE_INACTIVE_W
#define DISABLE_INACTIVE_E true
// Default Minimum Feedrates for printing and travel moves // Default Minimum Feedrates for printing and travel moves
#define DEFAULT_MINIMUMFEEDRATE 0.0 // (mm/s) Minimum feedrate. Set with M205 S. #define DEFAULT_MINIMUMFEEDRATE 0.0 // (mm/s) Minimum feedrate. Set with M205 S.

20
config/examples/Anet/ET4X/Configuration.h
View file

@ -1687,22 +1687,22 @@
// Disable axis steppers immediately when they're not being stepped. // Disable axis steppers immediately when they're not being stepped.
// WARNING: When motors turn off there is a chance of losing position accuracy! // WARNING: When motors turn off there is a chance of losing position accuracy!
#define DISABLE_X false //#define DISABLE_X
#define DISABLE_Y false //#define DISABLE_Y
#define DISABLE_Z false //#define DISABLE_Z
//#define DISABLE_I false //#define DISABLE_I
//#define DISABLE_J false //#define DISABLE_J
//#define DISABLE_K false //#define DISABLE_K
//#define DISABLE_U false //#define DISABLE_U
//#define DISABLE_V false //#define DISABLE_V
//#define DISABLE_W false //#define DISABLE_W
// Turn off the display blinking that warns about possible accuracy reduction // Turn off the display blinking that warns about possible accuracy reduction
//#define DISABLE_REDUCED_ACCURACY_WARNING //#define DISABLE_REDUCED_ACCURACY_WARNING
// @section extruder // @section extruder
#define DISABLE_E false // Disable the extruder when not stepping //#define DISABLE_E // Disable the extruder when not stepping
#define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled #define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled
// @section motion // @section motion

21
config/examples/Anet/ET4X/Configuration_adv.h
View file

@ -1118,20 +1118,19 @@
/** /**
* Idle Stepper Shutdown * Idle Stepper Shutdown
* Set DISABLE_INACTIVE_? 'true' to shut down axis steppers after an idle period. * Enable DISABLE_INACTIVE_* to shut down axis steppers after an idle period.
* The Deactive Time can be overridden with M18 and M84. Set to 0 for No Timeout. * The Deactive Time can be overridden with M18 and M84. Set to 0 for No Timeout.
*/ */
#define DEFAULT_STEPPER_DEACTIVE_TIME 120 #define DEFAULT_STEPPER_DEACTIVE_TIME 120
#define DISABLE_INACTIVE_X true #define DISABLE_INACTIVE_X
#define DISABLE_INACTIVE_Y true #define DISABLE_INACTIVE_Y
#define DISABLE_INACTIVE_Z true // Set 'false' if the nozzle could fall onto your printed part! #define DISABLE_INACTIVE_Z // Disable if the nozzle could fall onto your printed part!
#define DISABLE_INACTIVE_I true //#define DISABLE_INACTIVE_I
#define DISABLE_INACTIVE_J true //#define DISABLE_INACTIVE_J
#define DISABLE_INACTIVE_K true //#define DISABLE_INACTIVE_K
#define DISABLE_INACTIVE_U true //#define DISABLE_INACTIVE_U
#define DISABLE_INACTIVE_V true //#define DISABLE_INACTIVE_V
#define DISABLE_INACTIVE_W true //#define DISABLE_INACTIVE_W
#define DISABLE_INACTIVE_E true
// Default Minimum Feedrates for printing and travel moves // Default Minimum Feedrates for printing and travel moves
#define DEFAULT_MINIMUMFEEDRATE 0.0 // (mm/s) Minimum feedrate. Set with M205 S. #define DEFAULT_MINIMUMFEEDRATE 0.0 // (mm/s) Minimum feedrate. Set with M205 S.

20
config/examples/Anet/ET5-Pro/Configuration.h
View file

@ -1681,22 +1681,22 @@
// Disable axis steppers immediately when they're not being stepped. // Disable axis steppers immediately when they're not being stepped.
// WARNING: When motors turn off there is a chance of losing position accuracy! // WARNING: When motors turn off there is a chance of losing position accuracy!
#define DISABLE_X false //#define DISABLE_X
#define DISABLE_Y false //#define DISABLE_Y
#define DISABLE_Z false //#define DISABLE_Z
//#define DISABLE_I false //#define DISABLE_I
//#define DISABLE_J false //#define DISABLE_J
//#define DISABLE_K false //#define DISABLE_K
//#define DISABLE_U false //#define DISABLE_U
//#define DISABLE_V false //#define DISABLE_V
//#define DISABLE_W false //#define DISABLE_W
// Turn off the display blinking that warns about possible accuracy reduction // Turn off the display blinking that warns about possible accuracy reduction
//#define DISABLE_REDUCED_ACCURACY_WARNING //#define DISABLE_REDUCED_ACCURACY_WARNING
// @section extruder // @section extruder
#define DISABLE_E false // Disable the extruder when not stepping //#define DISABLE_E // Disable the extruder when not stepping
#define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled #define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled
// @section motion // @section motion

21
config/examples/Anet/ET5-Pro/Configuration_adv.h
View file

@ -1118,20 +1118,19 @@
/** /**
* Idle Stepper Shutdown * Idle Stepper Shutdown
* Set DISABLE_INACTIVE_? 'true' to shut down axis steppers after an idle period. * Enable DISABLE_INACTIVE_* to shut down axis steppers after an idle period.
* The Deactive Time can be overridden with M18 and M84. Set to 0 for No Timeout. * The Deactive Time can be overridden with M18 and M84. Set to 0 for No Timeout.
*/ */
#define DEFAULT_STEPPER_DEACTIVE_TIME 120 #define DEFAULT_STEPPER_DEACTIVE_TIME 120
#define DISABLE_INACTIVE_X true #define DISABLE_INACTIVE_X
#define DISABLE_INACTIVE_Y true #define DISABLE_INACTIVE_Y
#define DISABLE_INACTIVE_Z true // Set 'false' if the nozzle could fall onto your printed part! #define DISABLE_INACTIVE_Z // Disable if the nozzle could fall onto your printed part!
#define DISABLE_INACTIVE_I true //#define DISABLE_INACTIVE_I
#define DISABLE_INACTIVE_J true //#define DISABLE_INACTIVE_J
#define DISABLE_INACTIVE_K true //#define DISABLE_INACTIVE_K
#define DISABLE_INACTIVE_U true //#define DISABLE_INACTIVE_U
#define DISABLE_INACTIVE_V true //#define DISABLE_INACTIVE_V
#define DISABLE_INACTIVE_W true //#define DISABLE_INACTIVE_W
#define DISABLE_INACTIVE_E true
// Default Minimum Feedrates for printing and travel moves // Default Minimum Feedrates for printing and travel moves
#define DEFAULT_MINIMUMFEEDRATE 0.0 // (mm/s) Minimum feedrate. Set with M205 S. #define DEFAULT_MINIMUMFEEDRATE 0.0 // (mm/s) Minimum feedrate. Set with M205 S.

20
config/examples/Anet/ET5/Configuration.h
View file

@ -1681,22 +1681,22 @@
// Disable axis steppers immediately when they're not being stepped. // Disable axis steppers immediately when they're not being stepped.
// WARNING: When motors turn off there is a chance of losing position accuracy! // WARNING: When motors turn off there is a chance of losing position accuracy!
#define DISABLE_X false //#define DISABLE_X
#define DISABLE_Y false //#define DISABLE_Y
#define DISABLE_Z false //#define DISABLE_Z
//#define DISABLE_I false //#define DISABLE_I
//#define DISABLE_J false //#define DISABLE_J
//#define DISABLE_K false //#define DISABLE_K
//#define DISABLE_U false //#define DISABLE_U
//#define DISABLE_V false //#define DISABLE_V
//#define DISABLE_W false //#define DISABLE_W
// Turn off the display blinking that warns about possible accuracy reduction // Turn off the display blinking that warns about possible accuracy reduction
//#define DISABLE_REDUCED_ACCURACY_WARNING //#define DISABLE_REDUCED_ACCURACY_WARNING
// @section extruder // @section extruder
#define DISABLE_E false // Disable the extruder when not stepping //#define DISABLE_E // Disable the extruder when not stepping
#define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled #define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled
// @section motion // @section motion

21
config/examples/Anet/ET5/Configuration_adv.h
View file

@ -1118,20 +1118,19 @@
/** /**
* Idle Stepper Shutdown * Idle Stepper Shutdown
* Set DISABLE_INACTIVE_? 'true' to shut down axis steppers after an idle period. * Enable DISABLE_INACTIVE_* to shut down axis steppers after an idle period.
* The Deactive Time can be overridden with M18 and M84. Set to 0 for No Timeout. * The Deactive Time can be overridden with M18 and M84. Set to 0 for No Timeout.
*/ */
#define DEFAULT_STEPPER_DEACTIVE_TIME 120 #define DEFAULT_STEPPER_DEACTIVE_TIME 120
#define DISABLE_INACTIVE_X true #define DISABLE_INACTIVE_X
#define DISABLE_INACTIVE_Y true #define DISABLE_INACTIVE_Y
#define DISABLE_INACTIVE_Z true // Set 'false' if the nozzle could fall onto your printed part! #define DISABLE_INACTIVE_Z // Disable if the nozzle could fall onto your printed part!
#define DISABLE_INACTIVE_I true //#define DISABLE_INACTIVE_I
#define DISABLE_INACTIVE_J true //#define DISABLE_INACTIVE_J
#define DISABLE_INACTIVE_K true //#define DISABLE_INACTIVE_K
#define DISABLE_INACTIVE_U true //#define DISABLE_INACTIVE_U
#define DISABLE_INACTIVE_V true //#define DISABLE_INACTIVE_V
#define DISABLE_INACTIVE_W true //#define DISABLE_INACTIVE_W
#define DISABLE_INACTIVE_E true
// Default Minimum Feedrates for printing and travel moves // Default Minimum Feedrates for printing and travel moves
#define DEFAULT_MINIMUMFEEDRATE 0.0 // (mm/s) Minimum feedrate. Set with M205 S. #define DEFAULT_MINIMUMFEEDRATE 0.0 // (mm/s) Minimum feedrate. Set with M205 S.

20
config/examples/Anet/ET5X/Configuration.h
View file

@ -1681,22 +1681,22 @@
// Disable axis steppers immediately when they're not being stepped. // Disable axis steppers immediately when they're not being stepped.
// WARNING: When motors turn off there is a chance of losing position accuracy! // WARNING: When motors turn off there is a chance of losing position accuracy!
#define DISABLE_X false //#define DISABLE_X
#define DISABLE_Y false //#define DISABLE_Y
#define DISABLE_Z false //#define DISABLE_Z
//#define DISABLE_I false //#define DISABLE_I
//#define DISABLE_J false //#define DISABLE_J
//#define DISABLE_K false //#define DISABLE_K
//#define DISABLE_U false //#define DISABLE_U
//#define DISABLE_V false //#define DISABLE_V
//#define DISABLE_W false //#define DISABLE_W
// Turn off the display blinking that warns about possible accuracy reduction // Turn off the display blinking that warns about possible accuracy reduction
//#define DISABLE_REDUCED_ACCURACY_WARNING //#define DISABLE_REDUCED_ACCURACY_WARNING
// @section extruder // @section extruder
#define DISABLE_E false // Disable the extruder when not stepping //#define DISABLE_E // Disable the extruder when not stepping
#define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled #define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled
// @section motion // @section motion

21
config/examples/Anet/ET5X/Configuration_adv.h
View file

@ -1118,20 +1118,19 @@
/** /**
* Idle Stepper Shutdown * Idle Stepper Shutdown
* Set DISABLE_INACTIVE_? 'true' to shut down axis steppers after an idle period. * Enable DISABLE_INACTIVE_* to shut down axis steppers after an idle period.
* The Deactive Time can be overridden with M18 and M84. Set to 0 for No Timeout. * The Deactive Time can be overridden with M18 and M84. Set to 0 for No Timeout.
*/ */
#define DEFAULT_STEPPER_DEACTIVE_TIME 120 #define DEFAULT_STEPPER_DEACTIVE_TIME 120
#define DISABLE_INACTIVE_X true #define DISABLE_INACTIVE_X
#define DISABLE_INACTIVE_Y true #define DISABLE_INACTIVE_Y
#define DISABLE_INACTIVE_Z true // Set 'false' if the nozzle could fall onto your printed part! #define DISABLE_INACTIVE_Z // Disable if the nozzle could fall onto your printed part!
#define DISABLE_INACTIVE_I true //#define DISABLE_INACTIVE_I
#define DISABLE_INACTIVE_J true //#define DISABLE_INACTIVE_J
#define DISABLE_INACTIVE_K true //#define DISABLE_INACTIVE_K
#define DISABLE_INACTIVE_U true //#define DISABLE_INACTIVE_U
#define DISABLE_INACTIVE_V true //#define DISABLE_INACTIVE_V
#define DISABLE_INACTIVE_W true //#define DISABLE_INACTIVE_W
#define DISABLE_INACTIVE_E true
// Default Minimum Feedrates for printing and travel moves // Default Minimum Feedrates for printing and travel moves
#define DEFAULT_MINIMUMFEEDRATE 0.0 // (mm/s) Minimum feedrate. Set with M205 S. #define DEFAULT_MINIMUMFEEDRATE 0.0 // (mm/s) Minimum feedrate. Set with M205 S.

20
config/examples/AnyCubic/Chiron/Configuration.h
View file

@ -1684,22 +1684,22 @@
// Disable axis steppers immediately when they're not being stepped. // Disable axis steppers immediately when they're not being stepped.
// WARNING: When motors turn off there is a chance of losing position accuracy! // WARNING: When motors turn off there is a chance of losing position accuracy!
#define DISABLE_X false //#define DISABLE_X
#define DISABLE_Y false //#define DISABLE_Y
#define DISABLE_Z false //#define DISABLE_Z
//#define DISABLE_I false //#define DISABLE_I
//#define DISABLE_J false //#define DISABLE_J
//#define DISABLE_K false //#define DISABLE_K
//#define DISABLE_U false //#define DISABLE_U
//#define DISABLE_V false //#define DISABLE_V
//#define DISABLE_W false //#define DISABLE_W
// Turn off the display blinking that warns about possible accuracy reduction // Turn off the display blinking that warns about possible accuracy reduction
//#define DISABLE_REDUCED_ACCURACY_WARNING //#define DISABLE_REDUCED_ACCURACY_WARNING
// @section extruder // @section extruder
#define DISABLE_E false // Disable the extruder when not stepping //#define DISABLE_E // Disable the extruder when not stepping
#define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled #define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled
// @section motion // @section motion

21
config/examples/AnyCubic/Chiron/Configuration_adv.h
View file

@ -1118,20 +1118,19 @@
/** /**
* Idle Stepper Shutdown * Idle Stepper Shutdown
* Set DISABLE_INACTIVE_? 'true' to shut down axis steppers after an idle period. * Enable DISABLE_INACTIVE_* to shut down axis steppers after an idle period.
* The Deactive Time can be overridden with M18 and M84. Set to 0 for No Timeout. * The Deactive Time can be overridden with M18 and M84. Set to 0 for No Timeout.
*/ */
#define DEFAULT_STEPPER_DEACTIVE_TIME 120 #define DEFAULT_STEPPER_DEACTIVE_TIME 120
#define DISABLE_INACTIVE_X true #define DISABLE_INACTIVE_X
#define DISABLE_INACTIVE_Y true #define DISABLE_INACTIVE_Y
#define DISABLE_INACTIVE_Z false // Set 'false' if the nozzle could fall onto your printed part! //#define DISABLE_INACTIVE_Z // Disable if the nozzle could fall onto your printed part!
#define DISABLE_INACTIVE_I true //#define DISABLE_INACTIVE_I
#define DISABLE_INACTIVE_J true //#define DISABLE_INACTIVE_J
#define DISABLE_INACTIVE_K true //#define DISABLE_INACTIVE_K
#define DISABLE_INACTIVE_U true //#define DISABLE_INACTIVE_U
#define DISABLE_INACTIVE_V true //#define DISABLE_INACTIVE_V
#define DISABLE_INACTIVE_W true //#define DISABLE_INACTIVE_W
#define DISABLE_INACTIVE_E true
// Default Minimum Feedrates for printing and travel moves // Default Minimum Feedrates for printing and travel moves
#define DEFAULT_MINIMUMFEEDRATE 0.0 // (mm/s) Minimum feedrate. Set with M205 S. #define DEFAULT_MINIMUMFEEDRATE 0.0 // (mm/s) Minimum feedrate. Set with M205 S.

20
config/examples/AnyCubic/Mega Zero 2.0/Anycubic V1/Configuration.h
View file

@ -1682,22 +1682,22 @@
// Disable axis steppers immediately when they're not being stepped. // Disable axis steppers immediately when they're not being stepped.
// WARNING: When motors turn off there is a chance of losing position accuracy! // WARNING: When motors turn off there is a chance of losing position accuracy!
#define DISABLE_X false //#define DISABLE_X
#define DISABLE_Y false //#define DISABLE_Y
#define DISABLE_Z false //#define DISABLE_Z
//#define DISABLE_I false //#define DISABLE_I
//#define DISABLE_J false //#define DISABLE_J
//#define DISABLE_K false //#define DISABLE_K
//#define DISABLE_U false //#define DISABLE_U
//#define DISABLE_V false //#define DISABLE_V
//#define DISABLE_W false //#define DISABLE_W
// Turn off the display blinking that warns about possible accuracy reduction // Turn off the display blinking that warns about possible accuracy reduction
//#define DISABLE_REDUCED_ACCURACY_WARNING //#define DISABLE_REDUCED_ACCURACY_WARNING
// @section extruder // @section extruder
#define DISABLE_E false // Disable the extruder when not stepping //#define DISABLE_E // Disable the extruder when not stepping
#define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled #define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled
// @section motion // @section motion

21
config/examples/AnyCubic/Mega Zero 2.0/Anycubic V1/Configuration_adv.h
View file

@ -1118,20 +1118,19 @@
/** /**
* Idle Stepper Shutdown * Idle Stepper Shutdown
* Set DISABLE_INACTIVE_? 'true' to shut down axis steppers after an idle period. * Enable DISABLE_INACTIVE_* to shut down axis steppers after an idle period.
* The Deactive Time can be overridden with M18 and M84. Set to 0 for No Timeout. * The Deactive Time can be overridden with M18 and M84. Set to 0 for No Timeout.
*/ */
#define DEFAULT_STEPPER_DEACTIVE_TIME 120 #define DEFAULT_STEPPER_DEACTIVE_TIME 120
#define DISABLE_INACTIVE_X true #define DISABLE_INACTIVE_X
#define DISABLE_INACTIVE_Y true #define DISABLE_INACTIVE_Y
#define DISABLE_INACTIVE_Z true // Set 'false' if the nozzle could fall onto your printed part! #define DISABLE_INACTIVE_Z // Disable if the nozzle could fall onto your printed part!
#define DISABLE_INACTIVE_I true //#define DISABLE_INACTIVE_I
#define DISABLE_INACTIVE_J true //#define DISABLE_INACTIVE_J
#define DISABLE_INACTIVE_K true //#define DISABLE_INACTIVE_K
#define DISABLE_INACTIVE_U true //#define DISABLE_INACTIVE_U
#define DISABLE_INACTIVE_V true //#define DISABLE_INACTIVE_V
#define DISABLE_INACTIVE_W true //#define DISABLE_INACTIVE_W
#define DISABLE_INACTIVE_E true
// Default Minimum Feedrates for printing and travel moves // Default Minimum Feedrates for printing and travel moves
#define DEFAULT_MINIMUMFEEDRATE 0.0 // (mm/s) Minimum feedrate. Set with M205 S. #define DEFAULT_MINIMUMFEEDRATE 0.0 // (mm/s) Minimum feedrate. Set with M205 S.

20
config/examples/AnyCubic/Mega Zero/Anycubic V1/Configuration.h
View file

@ -1682,22 +1682,22 @@
// Disable axis steppers immediately when they're not being stepped. // Disable axis steppers immediately when they're not being stepped.
// WARNING: When motors turn off there is a chance of losing position accuracy! // WARNING: When motors turn off there is a chance of losing position accuracy!
#define DISABLE_X false //#define DISABLE_X
#define DISABLE_Y false //#define DISABLE_Y
#define DISABLE_Z false //#define DISABLE_Z
//#define DISABLE_I false //#define DISABLE_I
//#define DISABLE_J false //#define DISABLE_J
//#define DISABLE_K false //#define DISABLE_K
//#define DISABLE_U false //#define DISABLE_U
//#define DISABLE_V false //#define DISABLE_V
//#define DISABLE_W false //#define DISABLE_W
// Turn off the display blinking that warns about possible accuracy reduction // Turn off the display blinking that warns about possible accuracy reduction
//#define DISABLE_REDUCED_ACCURACY_WARNING //#define DISABLE_REDUCED_ACCURACY_WARNING
// @section extruder // @section extruder
#define DISABLE_E false // Disable the extruder when not stepping //#define DISABLE_E // Disable the extruder when not stepping
#define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled #define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled
// @section motion // @section motion

21
config/examples/AnyCubic/Mega Zero/Anycubic V1/Configuration_adv.h
View file

@ -1118,20 +1118,19 @@
/** /**
* Idle Stepper Shutdown * Idle Stepper Shutdown
* Set DISABLE_INACTIVE_? 'true' to shut down axis steppers after an idle period. * Enable DISABLE_INACTIVE_* to shut down axis steppers after an idle period.
* The Deactive Time can be overridden with M18 and M84. Set to 0 for No Timeout. * The Deactive Time can be overridden with M18 and M84. Set to 0 for No Timeout.
*/ */
#define DEFAULT_STEPPER_DEACTIVE_TIME 120 #define DEFAULT_STEPPER_DEACTIVE_TIME 120
#define DISABLE_INACTIVE_X true #define DISABLE_INACTIVE_X
#define DISABLE_INACTIVE_Y true #define DISABLE_INACTIVE_Y
#define DISABLE_INACTIVE_Z true // Set 'false' if the nozzle could fall onto your printed part! #define DISABLE_INACTIVE_Z // Disable if the nozzle could fall onto your printed part!
#define DISABLE_INACTIVE_I true //#define DISABLE_INACTIVE_I
#define DISABLE_INACTIVE_J true //#define DISABLE_INACTIVE_J
#define DISABLE_INACTIVE_K true //#define DISABLE_INACTIVE_K
#define DISABLE_INACTIVE_U true //#define DISABLE_INACTIVE_U
#define DISABLE_INACTIVE_V true //#define DISABLE_INACTIVE_V
#define DISABLE_INACTIVE_W true //#define DISABLE_INACTIVE_W
#define DISABLE_INACTIVE_E true
// Default Minimum Feedrates for printing and travel moves // Default Minimum Feedrates for printing and travel moves
#define DEFAULT_MINIMUMFEEDRATE 0.0 // (mm/s) Minimum feedrate. Set with M205 S. #define DEFAULT_MINIMUMFEEDRATE 0.0 // (mm/s) Minimum feedrate. Set with M205 S.

20
config/examples/AnyCubic/Mega Zero/BigTreeTech SKR Mini MZ V1.0/Configuration.h
View file

@ -1681,22 +1681,22 @@
// Disable axis steppers immediately when they're not being stepped. // Disable axis steppers immediately when they're not being stepped.
// WARNING: When motors turn off there is a chance of losing position accuracy! // WARNING: When motors turn off there is a chance of losing position accuracy!
#define DISABLE_X false //#define DISABLE_X
#define DISABLE_Y false //#define DISABLE_Y
#define DISABLE_Z false //#define DISABLE_Z
//#define DISABLE_I false //#define DISABLE_I
//#define DISABLE_J false //#define DISABLE_J
//#define DISABLE_K false //#define DISABLE_K
//#define DISABLE_U false //#define DISABLE_U
//#define DISABLE_V false //#define DISABLE_V
//#define DISABLE_W false //#define DISABLE_W
// Turn off the display blinking that warns about possible accuracy reduction // Turn off the display blinking that warns about possible accuracy reduction
//#define DISABLE_REDUCED_ACCURACY_WARNING //#define DISABLE_REDUCED_ACCURACY_WARNING
// @section extruder // @section extruder
#define DISABLE_E false // Disable the extruder when not stepping //#define DISABLE_E // Disable the extruder when not stepping
#define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled #define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled
// @section motion // @section motion

21
config/examples/AnyCubic/Mega Zero/BigTreeTech SKR Mini MZ V1.0/Configuration_adv.h
View file

@ -1118,20 +1118,19 @@
/** /**
* Idle Stepper Shutdown * Idle Stepper Shutdown
* Set DISABLE_INACTIVE_? 'true' to shut down axis steppers after an idle period. * Enable DISABLE_INACTIVE_* to shut down axis steppers after an idle period.
* The Deactive Time can be overridden with M18 and M84. Set to 0 for No Timeout. * The Deactive Time can be overridden with M18 and M84. Set to 0 for No Timeout.
*/ */
#define DEFAULT_STEPPER_DEACTIVE_TIME 120 #define DEFAULT_STEPPER_DEACTIVE_TIME 120
#define DISABLE_INACTIVE_X true #define DISABLE_INACTIVE_X
#define DISABLE_INACTIVE_Y true #define DISABLE_INACTIVE_Y
#define DISABLE_INACTIVE_Z true // Set 'false' if the nozzle could fall onto your printed part! #define DISABLE_INACTIVE_Z // Disable if the nozzle could fall onto your printed part!
#define DISABLE_INACTIVE_I true //#define DISABLE_INACTIVE_I
#define DISABLE_INACTIVE_J true //#define DISABLE_INACTIVE_J
#define DISABLE_INACTIVE_K true //#define DISABLE_INACTIVE_K
#define DISABLE_INACTIVE_U true //#define DISABLE_INACTIVE_U
#define DISABLE_INACTIVE_V true //#define DISABLE_INACTIVE_V
#define DISABLE_INACTIVE_W true //#define DISABLE_INACTIVE_W
#define DISABLE_INACTIVE_E true
// Default Minimum Feedrates for printing and travel moves // Default Minimum Feedrates for printing and travel moves
#define DEFAULT_MINIMUMFEEDRATE 0.0 // (mm/s) Minimum feedrate. Set with M205 S. #define DEFAULT_MINIMUMFEEDRATE 0.0 // (mm/s) Minimum feedrate. Set with M205 S.

20
config/examples/AnyCubic/i3 Mega/Trigorilla AVR/Configuration.h
View file

@ -1732,22 +1732,22 @@
// Disable axis steppers immediately when they're not being stepped. // Disable axis steppers immediately when they're not being stepped.
// WARNING: When motors turn off there is a chance of losing position accuracy! // WARNING: When motors turn off there is a chance of losing position accuracy!
#define DISABLE_X false //#define DISABLE_X
#define DISABLE_Y false //#define DISABLE_Y
#define DISABLE_Z false //#define DISABLE_Z
//#define DISABLE_I false //#define DISABLE_I
//#define DISABLE_J false //#define DISABLE_J
//#define DISABLE_K false //#define DISABLE_K
//#define DISABLE_U false //#define DISABLE_U
//#define DISABLE_V false //#define DISABLE_V
//#define DISABLE_W false //#define DISABLE_W
// Turn off the display blinking that warns about possible accuracy reduction // Turn off the display blinking that warns about possible accuracy reduction
//#define DISABLE_REDUCED_ACCURACY_WARNING //#define DISABLE_REDUCED_ACCURACY_WARNING
// @section extruder // @section extruder
#define DISABLE_E false // Disable the extruder when not stepping //#define DISABLE_E // Disable the extruder when not stepping
#define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled #define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled
// @section motion // @section motion

21
config/examples/AnyCubic/i3 Mega/Trigorilla AVR/Configuration_adv.h
View file

@ -1118,20 +1118,19 @@
/** /**
* Idle Stepper Shutdown * Idle Stepper Shutdown
* Set DISABLE_INACTIVE_? 'true' to shut down axis steppers after an idle period. * Enable DISABLE_INACTIVE_* to shut down axis steppers after an idle period.
* The Deactive Time can be overridden with M18 and M84. Set to 0 for No Timeout. * The Deactive Time can be overridden with M18 and M84. Set to 0 for No Timeout.
*/ */
#define DEFAULT_STEPPER_DEACTIVE_TIME 120 #define DEFAULT_STEPPER_DEACTIVE_TIME 120
#define DISABLE_INACTIVE_X true #define DISABLE_INACTIVE_X
#define DISABLE_INACTIVE_Y true #define DISABLE_INACTIVE_Y
#define DISABLE_INACTIVE_Z true // Set 'false' if the nozzle could fall onto your printed part! #define DISABLE_INACTIVE_Z // Disable if the nozzle could fall onto your printed part!
#define DISABLE_INACTIVE_I true //#define DISABLE_INACTIVE_I
#define DISABLE_INACTIVE_J true //#define DISABLE_INACTIVE_J
#define DISABLE_INACTIVE_K true //#define DISABLE_INACTIVE_K
#define DISABLE_INACTIVE_U true //#define DISABLE_INACTIVE_U
#define DISABLE_INACTIVE_V true //#define DISABLE_INACTIVE_V
#define DISABLE_INACTIVE_W true //#define DISABLE_INACTIVE_W
#define DISABLE_INACTIVE_E true
// Default Minimum Feedrates for printing and travel moves // Default Minimum Feedrates for printing and travel moves
#define DEFAULT_MINIMUMFEEDRATE 0.0 // (mm/s) Minimum feedrate. Set with M205 S. #define DEFAULT_MINIMUMFEEDRATE 0.0 // (mm/s) Minimum feedrate. Set with M205 S.

20
config/examples/AnyCubic/i3 Mega/Trigorilla Pro STM32/Configuration.h
View file

@ -1697,22 +1697,22 @@
// Disable axis steppers immediately when they're not being stepped. // Disable axis steppers immediately when they're not being stepped.
// WARNING: When motors turn off there is a chance of losing position accuracy! // WARNING: When motors turn off there is a chance of losing position accuracy!
#define DISABLE_X false //#define DISABLE_X
#define DISABLE_Y false //#define DISABLE_Y
#define DISABLE_Z false //#define DISABLE_Z
//#define DISABLE_I false //#define DISABLE_I
//#define DISABLE_J false //#define DISABLE_J
//#define DISABLE_K false //#define DISABLE_K
//#define DISABLE_U false //#define DISABLE_U
//#define DISABLE_V false //#define DISABLE_V
//#define DISABLE_W false //#define DISABLE_W
// Turn off the display blinking that warns about possible accuracy reduction // Turn off the display blinking that warns about possible accuracy reduction
//#define DISABLE_REDUCED_ACCURACY_WARNING //#define DISABLE_REDUCED_ACCURACY_WARNING
// @section extruder // @section extruder
#define DISABLE_E false // Disable the extruder when not stepping //#define DISABLE_E // Disable the extruder when not stepping
#define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled #define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled
// @section motion // @section motion

21
config/examples/AnyCubic/i3 Mega/Trigorilla Pro STM32/Configuration_adv.h
View file

@ -1118,20 +1118,19 @@
/** /**
* Idle Stepper Shutdown * Idle Stepper Shutdown
* Set DISABLE_INACTIVE_? 'true' to shut down axis steppers after an idle period. * Enable DISABLE_INACTIVE_* to shut down axis steppers after an idle period.
* The Deactive Time can be overridden with M18 and M84. Set to 0 for No Timeout. * The Deactive Time can be overridden with M18 and M84. Set to 0 for No Timeout.
*/ */
#define DEFAULT_STEPPER_DEACTIVE_TIME 120 #define DEFAULT_STEPPER_DEACTIVE_TIME 120
#define DISABLE_INACTIVE_X true #define DISABLE_INACTIVE_X
#define DISABLE_INACTIVE_Y true #define DISABLE_INACTIVE_Y
#define DISABLE_INACTIVE_Z true // Set 'false' if the nozzle could fall onto your printed part! #define DISABLE_INACTIVE_Z // Disable if the nozzle could fall onto your printed part!
#define DISABLE_INACTIVE_I true //#define DISABLE_INACTIVE_I
#define DISABLE_INACTIVE_J true //#define DISABLE_INACTIVE_J
#define DISABLE_INACTIVE_K true //#define DISABLE_INACTIVE_K
#define DISABLE_INACTIVE_U true //#define DISABLE_INACTIVE_U
#define DISABLE_INACTIVE_V true //#define DISABLE_INACTIVE_V
#define DISABLE_INACTIVE_W true //#define DISABLE_INACTIVE_W
#define DISABLE_INACTIVE_E true
// Default Minimum Feedrates for printing and travel moves // Default Minimum Feedrates for printing and travel moves
#define DEFAULT_MINIMUMFEEDRATE 0.0 // (mm/s) Minimum feedrate. Set with M205 S. #define DEFAULT_MINIMUMFEEDRATE 0.0 // (mm/s) Minimum feedrate. Set with M205 S.

20
config/examples/AnyCubic/i3/Configuration.h
View file

@ -1681,22 +1681,22 @@
// Disable axis steppers immediately when they're not being stepped. // Disable axis steppers immediately when they're not being stepped.
// WARNING: When motors turn off there is a chance of losing position accuracy! // WARNING: When motors turn off there is a chance of losing position accuracy!
#define DISABLE_X false //#define DISABLE_X
#define DISABLE_Y false //#define DISABLE_Y
#define DISABLE_Z false //#define DISABLE_Z
//#define DISABLE_I false //#define DISABLE_I
//#define DISABLE_J false //#define DISABLE_J
//#define DISABLE_K false //#define DISABLE_K
//#define DISABLE_U false //#define DISABLE_U
//#define DISABLE_V false //#define DISABLE_V
//#define DISABLE_W false //#define DISABLE_W
// Turn off the display blinking that warns about possible accuracy reduction // Turn off the display blinking that warns about possible accuracy reduction
//#define DISABLE_REDUCED_ACCURACY_WARNING //#define DISABLE_REDUCED_ACCURACY_WARNING
// @section extruder // @section extruder
#define DISABLE_E false // Disable the extruder when not stepping //#define DISABLE_E // Disable the extruder when not stepping
#define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled #define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled
// @section motion // @section motion

21
config/examples/AnyCubic/i3/Configuration_adv.h
View file

@ -1118,20 +1118,19 @@
/** /**
* Idle Stepper Shutdown * Idle Stepper Shutdown
* Set DISABLE_INACTIVE_? 'true' to shut down axis steppers after an idle period. * Enable DISABLE_INACTIVE_* to shut down axis steppers after an idle period.
* The Deactive Time can be overridden with M18 and M84. Set to 0 for No Timeout. * The Deactive Time can be overridden with M18 and M84. Set to 0 for No Timeout.
*/ */
#define DEFAULT_STEPPER_DEACTIVE_TIME 120 #define DEFAULT_STEPPER_DEACTIVE_TIME 120
#define DISABLE_INACTIVE_X true #define DISABLE_INACTIVE_X
#define DISABLE_INACTIVE_Y true #define DISABLE_INACTIVE_Y
#define DISABLE_INACTIVE_Z true // Set 'false' if the nozzle could fall onto your printed part! #define DISABLE_INACTIVE_Z // Disable if the nozzle could fall onto your printed part!
#define DISABLE_INACTIVE_I true //#define DISABLE_INACTIVE_I
#define DISABLE_INACTIVE_J true //#define DISABLE_INACTIVE_J
#define DISABLE_INACTIVE_K true //#define DISABLE_INACTIVE_K
#define DISABLE_INACTIVE_U true //#define DISABLE_INACTIVE_U
#define DISABLE_INACTIVE_V true //#define DISABLE_INACTIVE_V
#define DISABLE_INACTIVE_W true //#define DISABLE_INACTIVE_W
#define DISABLE_INACTIVE_E true
// Default Minimum Feedrates for printing and travel moves // Default Minimum Feedrates for printing and travel moves
#define DEFAULT_MINIMUMFEEDRATE 0.0 // (mm/s) Minimum feedrate. Set with M205 S. #define DEFAULT_MINIMUMFEEDRATE 0.0 // (mm/s) Minimum feedrate. Set with M205 S.

20
config/examples/ArmEd/Configuration.h
View file

@ -1682,22 +1682,22 @@
// Disable axis steppers immediately when they're not being stepped. // Disable axis steppers immediately when they're not being stepped.
// WARNING: When motors turn off there is a chance of losing position accuracy! // WARNING: When motors turn off there is a chance of losing position accuracy!
#define DISABLE_X false //#define DISABLE_X
#define DISABLE_Y false //#define DISABLE_Y
#define DISABLE_Z false //#define DISABLE_Z
//#define DISABLE_I false //#define DISABLE_I
//#define DISABLE_J false //#define DISABLE_J
//#define DISABLE_K false //#define DISABLE_K
//#define DISABLE_U false //#define DISABLE_U
//#define DISABLE_V false //#define DISABLE_V
//#define DISABLE_W false //#define DISABLE_W
// Turn off the display blinking that warns about possible accuracy reduction // Turn off the display blinking that warns about possible accuracy reduction
//#define DISABLE_REDUCED_ACCURACY_WARNING //#define DISABLE_REDUCED_ACCURACY_WARNING
// @section extruder // @section extruder
#define DISABLE_E false // Disable the extruder when not stepping //#define DISABLE_E // Disable the extruder when not stepping
#define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled #define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled
// @section motion // @section motion

21
config/examples/ArmEd/Configuration_adv.h
View file

@ -1123,20 +1123,19 @@
/** /**
* Idle Stepper Shutdown * Idle Stepper Shutdown
* Set DISABLE_INACTIVE_? 'true' to shut down axis steppers after an idle period. * Enable DISABLE_INACTIVE_* to shut down axis steppers after an idle period.
* The Deactive Time can be overridden with M18 and M84. Set to 0 for No Timeout. * The Deactive Time can be overridden with M18 and M84. Set to 0 for No Timeout.
*/ */
#define DEFAULT_STEPPER_DEACTIVE_TIME 120 #define DEFAULT_STEPPER_DEACTIVE_TIME 120
#define DISABLE_INACTIVE_X true #define DISABLE_INACTIVE_X
#define DISABLE_INACTIVE_Y true #define DISABLE_INACTIVE_Y
#define DISABLE_INACTIVE_Z true // Set 'false' if the nozzle could fall onto your printed part! #define DISABLE_INACTIVE_Z // Disable if the nozzle could fall onto your printed part!
#define DISABLE_INACTIVE_I true //#define DISABLE_INACTIVE_I
#define DISABLE_INACTIVE_J true //#define DISABLE_INACTIVE_J
#define DISABLE_INACTIVE_K true //#define DISABLE_INACTIVE_K
#define DISABLE_INACTIVE_U true //#define DISABLE_INACTIVE_U
#define DISABLE_INACTIVE_V true //#define DISABLE_INACTIVE_V
#define DISABLE_INACTIVE_W true //#define DISABLE_INACTIVE_W
#define DISABLE_INACTIVE_E true
// Default Minimum Feedrates for printing and travel moves // Default Minimum Feedrates for printing and travel moves
#define DEFAULT_MINIMUMFEEDRATE 0.0 // (mm/s) Minimum feedrate. Set with M205 S. #define DEFAULT_MINIMUMFEEDRATE 0.0 // (mm/s) Minimum feedrate. Set with M205 S.

20
config/examples/Artillery/Genius Pro/Configuration.h
View file

@ -1681,22 +1681,22 @@
// Disable axis steppers immediately when they're not being stepped. // Disable axis steppers immediately when they're not being stepped.
// WARNING: When motors turn off there is a chance of losing position accuracy! // WARNING: When motors turn off there is a chance of losing position accuracy!
#define DISABLE_X false //#define DISABLE_X
#define DISABLE_Y false //#define DISABLE_Y
#define DISABLE_Z false //#define DISABLE_Z
//#define DISABLE_I false //#define DISABLE_I
//#define DISABLE_J false //#define DISABLE_J
//#define DISABLE_K false //#define DISABLE_K
//#define DISABLE_U false //#define DISABLE_U
//#define DISABLE_V false //#define DISABLE_V
//#define DISABLE_W false //#define DISABLE_W
// Turn off the display blinking that warns about possible accuracy reduction // Turn off the display blinking that warns about possible accuracy reduction
//#define DISABLE_REDUCED_ACCURACY_WARNING //#define DISABLE_REDUCED_ACCURACY_WARNING
// @section extruder // @section extruder
#define DISABLE_E false // Disable the extruder when not stepping //#define DISABLE_E // Disable the extruder when not stepping
#define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled #define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled
// @section motion // @section motion

21
config/examples/Artillery/Genius Pro/Configuration_adv.h
View file

@ -1118,20 +1118,19 @@
/** /**
* Idle Stepper Shutdown * Idle Stepper Shutdown
* Set DISABLE_INACTIVE_? 'true' to shut down axis steppers after an idle period. * Enable DISABLE_INACTIVE_* to shut down axis steppers after an idle period.
* The Deactive Time can be overridden with M18 and M84. Set to 0 for No Timeout. * The Deactive Time can be overridden with M18 and M84. Set to 0 for No Timeout.
*/ */
#define DEFAULT_STEPPER_DEACTIVE_TIME 120 #define DEFAULT_STEPPER_DEACTIVE_TIME 120
#define DISABLE_INACTIVE_X true #define DISABLE_INACTIVE_X
#define DISABLE_INACTIVE_Y true #define DISABLE_INACTIVE_Y
#define DISABLE_INACTIVE_Z true // Set 'false' if the nozzle could fall onto your printed part! #define DISABLE_INACTIVE_Z // Disable if the nozzle could fall onto your printed part!
#define DISABLE_INACTIVE_I true //#define DISABLE_INACTIVE_I
#define DISABLE_INACTIVE_J true //#define DISABLE_INACTIVE_J
#define DISABLE_INACTIVE_K true //#define DISABLE_INACTIVE_K
#define DISABLE_INACTIVE_U true //#define DISABLE_INACTIVE_U
#define DISABLE_INACTIVE_V true //#define DISABLE_INACTIVE_V
#define DISABLE_INACTIVE_W true //#define DISABLE_INACTIVE_W
#define DISABLE_INACTIVE_E true
// Default Minimum Feedrates for printing and travel moves // Default Minimum Feedrates for printing and travel moves
#define DEFAULT_MINIMUMFEEDRATE 0.0 // (mm/s) Minimum feedrate. Set with M205 S. #define DEFAULT_MINIMUMFEEDRATE 0.0 // (mm/s) Minimum feedrate. Set with M205 S.

20
config/examples/Artillery/Genius/BLTouch/Configuration.h
View file

@ -1681,22 +1681,22 @@
// Disable axis steppers immediately when they're not being stepped. // Disable axis steppers immediately when they're not being stepped.
// WARNING: When motors turn off there is a chance of losing position accuracy! // WARNING: When motors turn off there is a chance of losing position accuracy!
#define DISABLE_X false //#define DISABLE_X
#define DISABLE_Y false //#define DISABLE_Y
#define DISABLE_Z false //#define DISABLE_Z
//#define DISABLE_I false //#define DISABLE_I
//#define DISABLE_J false //#define DISABLE_J
//#define DISABLE_K false //#define DISABLE_K
//#define DISABLE_U false //#define DISABLE_U
//#define DISABLE_V false //#define DISABLE_V
//#define DISABLE_W false //#define DISABLE_W
// Turn off the display blinking that warns about possible accuracy reduction // Turn off the display blinking that warns about possible accuracy reduction
//#define DISABLE_REDUCED_ACCURACY_WARNING //#define DISABLE_REDUCED_ACCURACY_WARNING
// @section extruder // @section extruder
#define DISABLE_E false // Disable the extruder when not stepping //#define DISABLE_E // Disable the extruder when not stepping
#define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled #define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled
// @section motion // @section motion

21
config/examples/Artillery/Genius/BLTouch/Configuration_adv.h
View file

@ -1118,20 +1118,19 @@
/** /**
* Idle Stepper Shutdown * Idle Stepper Shutdown
* Set DISABLE_INACTIVE_? 'true' to shut down axis steppers after an idle period. * Enable DISABLE_INACTIVE_* to shut down axis steppers after an idle period.
* The Deactive Time can be overridden with M18 and M84. Set to 0 for No Timeout. * The Deactive Time can be overridden with M18 and M84. Set to 0 for No Timeout.
*/ */
#define DEFAULT_STEPPER_DEACTIVE_TIME 120 #define DEFAULT_STEPPER_DEACTIVE_TIME 120
#define DISABLE_INACTIVE_X true #define DISABLE_INACTIVE_X
#define DISABLE_INACTIVE_Y true #define DISABLE_INACTIVE_Y
#define DISABLE_INACTIVE_Z true // Set 'false' if the nozzle could fall onto your printed part! #define DISABLE_INACTIVE_Z // Disable if the nozzle could fall onto your printed part!
#define DISABLE_INACTIVE_I true //#define DISABLE_INACTIVE_I
#define DISABLE_INACTIVE_J true //#define DISABLE_INACTIVE_J
#define DISABLE_INACTIVE_K true //#define DISABLE_INACTIVE_K
#define DISABLE_INACTIVE_U true //#define DISABLE_INACTIVE_U
#define DISABLE_INACTIVE_V true //#define DISABLE_INACTIVE_V
#define DISABLE_INACTIVE_W true //#define DISABLE_INACTIVE_W
#define DISABLE_INACTIVE_E true
// Default Minimum Feedrates for printing and travel moves // Default Minimum Feedrates for printing and travel moves
#define DEFAULT_MINIMUMFEEDRATE 0.0 // (mm/s) Minimum feedrate. Set with M205 S. #define DEFAULT_MINIMUMFEEDRATE 0.0 // (mm/s) Minimum feedrate. Set with M205 S.

20
config/examples/Artillery/Genius/V1/Configuration.h
View file

@ -1681,22 +1681,22 @@
// Disable axis steppers immediately when they're not being stepped. // Disable axis steppers immediately when they're not being stepped.
// WARNING: When motors turn off there is a chance of losing position accuracy! // WARNING: When motors turn off there is a chance of losing position accuracy!
#define DISABLE_X false //#define DISABLE_X
#define DISABLE_Y false //#define DISABLE_Y
#define DISABLE_Z false //#define DISABLE_Z
//#define DISABLE_I false //#define DISABLE_I
//#define DISABLE_J false //#define DISABLE_J
//#define DISABLE_K false //#define DISABLE_K
//#define DISABLE_U false //#define DISABLE_U
//#define DISABLE_V false //#define DISABLE_V
//#define DISABLE_W false //#define DISABLE_W
// Turn off the display blinking that warns about possible accuracy reduction // Turn off the display blinking that warns about possible accuracy reduction
//#define DISABLE_REDUCED_ACCURACY_WARNING //#define DISABLE_REDUCED_ACCURACY_WARNING
// @section extruder // @section extruder
#define DISABLE_E false // Disable the extruder when not stepping //#define DISABLE_E // Disable the extruder when not stepping
#define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled #define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled
// @section motion // @section motion

21
config/examples/Artillery/Genius/V1/Configuration_adv.h
View file

@ -1118,20 +1118,19 @@
/** /**
* Idle Stepper Shutdown * Idle Stepper Shutdown
* Set DISABLE_INACTIVE_? 'true' to shut down axis steppers after an idle period. * Enable DISABLE_INACTIVE_* to shut down axis steppers after an idle period.
* The Deactive Time can be overridden with M18 and M84. Set to 0 for No Timeout. * The Deactive Time can be overridden with M18 and M84. Set to 0 for No Timeout.
*/ */
#define DEFAULT_STEPPER_DEACTIVE_TIME 120 #define DEFAULT_STEPPER_DEACTIVE_TIME 120
#define DISABLE_INACTIVE_X true #define DISABLE_INACTIVE_X
#define DISABLE_INACTIVE_Y true #define DISABLE_INACTIVE_Y
#define DISABLE_INACTIVE_Z true // Set 'false' if the nozzle could fall onto your printed part! #define DISABLE_INACTIVE_Z // Disable if the nozzle could fall onto your printed part!
#define DISABLE_INACTIVE_I true //#define DISABLE_INACTIVE_I
#define DISABLE_INACTIVE_J true //#define DISABLE_INACTIVE_J
#define DISABLE_INACTIVE_K true //#define DISABLE_INACTIVE_K
#define DISABLE_INACTIVE_U true //#define DISABLE_INACTIVE_U
#define DISABLE_INACTIVE_V true //#define DISABLE_INACTIVE_V
#define DISABLE_INACTIVE_W true //#define DISABLE_INACTIVE_W
#define DISABLE_INACTIVE_E true
// Default Minimum Feedrates for printing and travel moves // Default Minimum Feedrates for printing and travel moves
#define DEFAULT_MINIMUMFEEDRATE 0.0 // (mm/s) Minimum feedrate. Set with M205 S. #define DEFAULT_MINIMUMFEEDRATE 0.0 // (mm/s) Minimum feedrate. Set with M205 S.

20
config/examples/Artillery/Hornet/Configuration.h
View file

@ -1681,22 +1681,22 @@
// Disable axis steppers immediately when they're not being stepped. // Disable axis steppers immediately when they're not being stepped.
// WARNING: When motors turn off there is a chance of losing position accuracy! // WARNING: When motors turn off there is a chance of losing position accuracy!
#define DISABLE_X false //#define DISABLE_X
#define DISABLE_Y false //#define DISABLE_Y
#define DISABLE_Z false //#define DISABLE_Z
//#define DISABLE_I false //#define DISABLE_I
//#define DISABLE_J false //#define DISABLE_J
//#define DISABLE_K false //#define DISABLE_K
//#define DISABLE_U false //#define DISABLE_U
//#define DISABLE_V false //#define DISABLE_V
//#define DISABLE_W false //#define DISABLE_W
// Turn off the display blinking that warns about possible accuracy reduction // Turn off the display blinking that warns about possible accuracy reduction
//#define DISABLE_REDUCED_ACCURACY_WARNING //#define DISABLE_REDUCED_ACCURACY_WARNING
// @section extruder // @section extruder
#define DISABLE_E false // Disable the extruder when not stepping //#define DISABLE_E // Disable the extruder when not stepping
#define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled #define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled
// @section motion // @section motion

21
config/examples/Artillery/Hornet/Configuration_adv.h
View file

@ -1118,20 +1118,19 @@
/** /**
* Idle Stepper Shutdown * Idle Stepper Shutdown
* Set DISABLE_INACTIVE_? 'true' to shut down axis steppers after an idle period. * Enable DISABLE_INACTIVE_* to shut down axis steppers after an idle period.
* The Deactive Time can be overridden with M18 and M84. Set to 0 for No Timeout. * The Deactive Time can be overridden with M18 and M84. Set to 0 for No Timeout.
*/ */
#define DEFAULT_STEPPER_DEACTIVE_TIME 120 #define DEFAULT_STEPPER_DEACTIVE_TIME 120
#define DISABLE_INACTIVE_X true #define DISABLE_INACTIVE_X
#define DISABLE_INACTIVE_Y true #define DISABLE_INACTIVE_Y
#define DISABLE_INACTIVE_Z true // Set 'false' if the nozzle could fall onto your printed part! #define DISABLE_INACTIVE_Z // Disable if the nozzle could fall onto your printed part!
#define DISABLE_INACTIVE_I true //#define DISABLE_INACTIVE_I
#define DISABLE_INACTIVE_J true //#define DISABLE_INACTIVE_J
#define DISABLE_INACTIVE_K true //#define DISABLE_INACTIVE_K
#define DISABLE_INACTIVE_U true //#define DISABLE_INACTIVE_U
#define DISABLE_INACTIVE_V true //#define DISABLE_INACTIVE_V
#define DISABLE_INACTIVE_W true //#define DISABLE_INACTIVE_W
#define DISABLE_INACTIVE_E true
// Default Minimum Feedrates for printing and travel moves // Default Minimum Feedrates for printing and travel moves
#define DEFAULT_MINIMUMFEEDRATE 0.0 // (mm/s) Minimum feedrate. Set with M205 S. #define DEFAULT_MINIMUMFEEDRATE 0.0 // (mm/s) Minimum feedrate. Set with M205 S.

20
config/examples/Artillery/Sidewinder X1/0.9 BMG - E3D V6/Configuration.h
View file

@ -1697,22 +1697,22 @@
// Disable axis steppers immediately when they're not being stepped. // Disable axis steppers immediately when they're not being stepped.
// WARNING: When motors turn off there is a chance of losing position accuracy! // WARNING: When motors turn off there is a chance of losing position accuracy!
#define DISABLE_X false //#define DISABLE_X
#define DISABLE_Y false //#define DISABLE_Y
#define DISABLE_Z false //#define DISABLE_Z
//#define DISABLE_I false //#define DISABLE_I
//#define DISABLE_J false //#define DISABLE_J
//#define DISABLE_K false //#define DISABLE_K
//#define DISABLE_U false //#define DISABLE_U
//#define DISABLE_V false //#define DISABLE_V
//#define DISABLE_W false //#define DISABLE_W
// Turn off the display blinking that warns about possible accuracy reduction // Turn off the display blinking that warns about possible accuracy reduction
//#define DISABLE_REDUCED_ACCURACY_WARNING //#define DISABLE_REDUCED_ACCURACY_WARNING
// @section extruder // @section extruder
#define DISABLE_E false // Disable the extruder when not stepping //#define DISABLE_E // Disable the extruder when not stepping
#define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled #define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled
// @section motion // @section motion

21
config/examples/Artillery/Sidewinder X1/0.9 BMG - E3D V6/Configuration_adv.h
View file

@ -1118,20 +1118,19 @@
/** /**
* Idle Stepper Shutdown * Idle Stepper Shutdown
* Set DISABLE_INACTIVE_? 'true' to shut down axis steppers after an idle period. * Enable DISABLE_INACTIVE_* to shut down axis steppers after an idle period.
* The Deactive Time can be overridden with M18 and M84. Set to 0 for No Timeout. * The Deactive Time can be overridden with M18 and M84. Set to 0 for No Timeout.
*/ */
#define DEFAULT_STEPPER_DEACTIVE_TIME 120 #define DEFAULT_STEPPER_DEACTIVE_TIME 120
#define DISABLE_INACTIVE_X true #define DISABLE_INACTIVE_X
#define DISABLE_INACTIVE_Y true #define DISABLE_INACTIVE_Y
#define DISABLE_INACTIVE_Z true // Set 'false' if the nozzle could fall onto your printed part! #define DISABLE_INACTIVE_Z // Disable if the nozzle could fall onto your printed part!
#define DISABLE_INACTIVE_I true //#define DISABLE_INACTIVE_I
#define DISABLE_INACTIVE_J true //#define DISABLE_INACTIVE_J
#define DISABLE_INACTIVE_K true //#define DISABLE_INACTIVE_K
#define DISABLE_INACTIVE_U true //#define DISABLE_INACTIVE_U
#define DISABLE_INACTIVE_V true //#define DISABLE_INACTIVE_V
#define DISABLE_INACTIVE_W true //#define DISABLE_INACTIVE_W
#define DISABLE_INACTIVE_E true
// Default Minimum Feedrates for printing and travel moves // Default Minimum Feedrates for printing and travel moves
#define DEFAULT_MINIMUMFEEDRATE 0.0 // (mm/s) Minimum feedrate. Set with M205 S. #define DEFAULT_MINIMUMFEEDRATE 0.0 // (mm/s) Minimum feedrate. Set with M205 S.

20
config/examples/Artillery/Sidewinder X1/V1/Configuration.h
View file

@ -1681,22 +1681,22 @@
// Disable axis steppers immediately when they're not being stepped. // Disable axis steppers immediately when they're not being stepped.
// WARNING: When motors turn off there is a chance of losing position accuracy! // WARNING: When motors turn off there is a chance of losing position accuracy!
#define DISABLE_X false //#define DISABLE_X
#define DISABLE_Y false //#define DISABLE_Y
#define DISABLE_Z false //#define DISABLE_Z
//#define DISABLE_I false //#define DISABLE_I
//#define DISABLE_J false //#define DISABLE_J
//#define DISABLE_K false //#define DISABLE_K
//#define DISABLE_U false //#define DISABLE_U
//#define DISABLE_V false //#define DISABLE_V
//#define DISABLE_W false //#define DISABLE_W
// Turn off the display blinking that warns about possible accuracy reduction // Turn off the display blinking that warns about possible accuracy reduction
//#define DISABLE_REDUCED_ACCURACY_WARNING //#define DISABLE_REDUCED_ACCURACY_WARNING
// @section extruder // @section extruder
#define DISABLE_E false // Disable the extruder when not stepping //#define DISABLE_E // Disable the extruder when not stepping
#define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled #define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled
// @section motion // @section motion

21
config/examples/Artillery/Sidewinder X1/V1/Configuration_adv.h
View file

@ -1118,20 +1118,19 @@
/** /**
* Idle Stepper Shutdown * Idle Stepper Shutdown
* Set DISABLE_INACTIVE_? 'true' to shut down axis steppers after an idle period. * Enable DISABLE_INACTIVE_* to shut down axis steppers after an idle period.
* The Deactive Time can be overridden with M18 and M84. Set to 0 for No Timeout. * The Deactive Time can be overridden with M18 and M84. Set to 0 for No Timeout.
*/ */
#define DEFAULT_STEPPER_DEACTIVE_TIME 120 #define DEFAULT_STEPPER_DEACTIVE_TIME 120
#define DISABLE_INACTIVE_X true #define DISABLE_INACTIVE_X
#define DISABLE_INACTIVE_Y true #define DISABLE_INACTIVE_Y
#define DISABLE_INACTIVE_Z true // Set 'false' if the nozzle could fall onto your printed part! #define DISABLE_INACTIVE_Z // Disable if the nozzle could fall onto your printed part!
#define DISABLE_INACTIVE_I true //#define DISABLE_INACTIVE_I
#define DISABLE_INACTIVE_J true //#define DISABLE_INACTIVE_J
#define DISABLE_INACTIVE_K true //#define DISABLE_INACTIVE_K
#define DISABLE_INACTIVE_U true //#define DISABLE_INACTIVE_U
#define DISABLE_INACTIVE_V true //#define DISABLE_INACTIVE_V
#define DISABLE_INACTIVE_W true //#define DISABLE_INACTIVE_W
#define DISABLE_INACTIVE_E true
// Default Minimum Feedrates for printing and travel moves // Default Minimum Feedrates for printing and travel moves
#define DEFAULT_MINIMUMFEEDRATE 0.0 // (mm/s) Minimum feedrate. Set with M205 S. #define DEFAULT_MINIMUMFEEDRATE 0.0 // (mm/s) Minimum feedrate. Set with M205 S.

20
config/examples/Artillery/Sidewinder X2/Configuration.h
View file

@ -1681,22 +1681,22 @@
// Disable axis steppers immediately when they're not being stepped. // Disable axis steppers immediately when they're not being stepped.
// WARNING: When motors turn off there is a chance of losing position accuracy! // WARNING: When motors turn off there is a chance of losing position accuracy!
#define DISABLE_X false //#define DISABLE_X
#define DISABLE_Y false //#define DISABLE_Y
#define DISABLE_Z false //#define DISABLE_Z
//#define DISABLE_I false //#define DISABLE_I
//#define DISABLE_J false //#define DISABLE_J
//#define DISABLE_K false //#define DISABLE_K
//#define DISABLE_U false //#define DISABLE_U
//#define DISABLE_V false //#define DISABLE_V
//#define DISABLE_W false //#define DISABLE_W
// Turn off the display blinking that warns about possible accuracy reduction // Turn off the display blinking that warns about possible accuracy reduction
//#define DISABLE_REDUCED_ACCURACY_WARNING //#define DISABLE_REDUCED_ACCURACY_WARNING
// @section extruder // @section extruder
#define DISABLE_E false // Disable the extruder when not stepping //#define DISABLE_E // Disable the extruder when not stepping
#define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled #define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled
// @section motion // @section motion

21
config/examples/Artillery/Sidewinder X2/Configuration_adv.h
View file

@ -1118,20 +1118,19 @@
/** /**
* Idle Stepper Shutdown * Idle Stepper Shutdown
* Set DISABLE_INACTIVE_? 'true' to shut down axis steppers after an idle period. * Enable DISABLE_INACTIVE_* to shut down axis steppers after an idle period.
* The Deactive Time can be overridden with M18 and M84. Set to 0 for No Timeout. * The Deactive Time can be overridden with M18 and M84. Set to 0 for No Timeout.
*/ */
#define DEFAULT_STEPPER_DEACTIVE_TIME 120 #define DEFAULT_STEPPER_DEACTIVE_TIME 120
#define DISABLE_INACTIVE_X true #define DISABLE_INACTIVE_X
#define DISABLE_INACTIVE_Y true #define DISABLE_INACTIVE_Y
#define DISABLE_INACTIVE_Z true // Set 'false' if the nozzle could fall onto your printed part! #define DISABLE_INACTIVE_Z // Disable if the nozzle could fall onto your printed part!
#define DISABLE_INACTIVE_I true //#define DISABLE_INACTIVE_I
#define DISABLE_INACTIVE_J true //#define DISABLE_INACTIVE_J
#define DISABLE_INACTIVE_K true //#define DISABLE_INACTIVE_K
#define DISABLE_INACTIVE_U true //#define DISABLE_INACTIVE_U
#define DISABLE_INACTIVE_V true //#define DISABLE_INACTIVE_V
#define DISABLE_INACTIVE_W true //#define DISABLE_INACTIVE_W
#define DISABLE_INACTIVE_E true
// Default Minimum Feedrates for printing and travel moves // Default Minimum Feedrates for printing and travel moves
#define DEFAULT_MINIMUMFEEDRATE 0.0 // (mm/s) Minimum feedrate. Set with M205 S. #define DEFAULT_MINIMUMFEEDRATE 0.0 // (mm/s) Minimum feedrate. Set with M205 S.

20
config/examples/Azteeg/X5GT/Configuration.h
View file

@ -1681,22 +1681,22 @@
// Disable axis steppers immediately when they're not being stepped. // Disable axis steppers immediately when they're not being stepped.
// WARNING: When motors turn off there is a chance of losing position accuracy! // WARNING: When motors turn off there is a chance of losing position accuracy!
#define DISABLE_X false //#define DISABLE_X
#define DISABLE_Y false //#define DISABLE_Y
#define DISABLE_Z false //#define DISABLE_Z
//#define DISABLE_I false //#define DISABLE_I
//#define DISABLE_J false //#define DISABLE_J
//#define DISABLE_K false //#define DISABLE_K
//#define DISABLE_U false //#define DISABLE_U
//#define DISABLE_V false //#define DISABLE_V
//#define DISABLE_W false //#define DISABLE_W
// Turn off the display blinking that warns about possible accuracy reduction // Turn off the display blinking that warns about possible accuracy reduction
//#define DISABLE_REDUCED_ACCURACY_WARNING //#define DISABLE_REDUCED_ACCURACY_WARNING
// @section extruder // @section extruder
#define DISABLE_E false // Disable the extruder when not stepping //#define DISABLE_E // Disable the extruder when not stepping
#define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled #define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled
// @section motion // @section motion

20
config/examples/BIBO/TouchX/cyclops/Configuration.h
View file

@ -1681,22 +1681,22 @@
// Disable axis steppers immediately when they're not being stepped. // Disable axis steppers immediately when they're not being stepped.
// WARNING: When motors turn off there is a chance of losing position accuracy! // WARNING: When motors turn off there is a chance of losing position accuracy!
#define DISABLE_X false //#define DISABLE_X
#define DISABLE_Y false //#define DISABLE_Y
#define DISABLE_Z false //#define DISABLE_Z
//#define DISABLE_I false //#define DISABLE_I
//#define DISABLE_J false //#define DISABLE_J
//#define DISABLE_K false //#define DISABLE_K
//#define DISABLE_U false //#define DISABLE_U
//#define DISABLE_V false //#define DISABLE_V
//#define DISABLE_W false //#define DISABLE_W
// Turn off the display blinking that warns about possible accuracy reduction // Turn off the display blinking that warns about possible accuracy reduction
//#define DISABLE_REDUCED_ACCURACY_WARNING //#define DISABLE_REDUCED_ACCURACY_WARNING
// @section extruder // @section extruder
#define DISABLE_E false // Disable the extruder when not stepping //#define DISABLE_E // Disable the extruder when not stepping
//#define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled //#define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled
// @section motion // @section motion

21
config/examples/BIBO/TouchX/cyclops/Configuration_adv.h
View file

@ -1118,20 +1118,19 @@
/** /**
* Idle Stepper Shutdown * Idle Stepper Shutdown
* Set DISABLE_INACTIVE_? 'true' to shut down axis steppers after an idle period. * Enable DISABLE_INACTIVE_* to shut down axis steppers after an idle period.
* The Deactive Time can be overridden with M18 and M84. Set to 0 for No Timeout. * The Deactive Time can be overridden with M18 and M84. Set to 0 for No Timeout.
*/ */
#define DEFAULT_STEPPER_DEACTIVE_TIME 120 #define DEFAULT_STEPPER_DEACTIVE_TIME 120
#define DISABLE_INACTIVE_X true #define DISABLE_INACTIVE_X
#define DISABLE_INACTIVE_Y true #define DISABLE_INACTIVE_Y
#define DISABLE_INACTIVE_Z true // Set 'false' if the nozzle could fall onto your printed part! #define DISABLE_INACTIVE_Z // Disable if the nozzle could fall onto your printed part!
#define DISABLE_INACTIVE_I true //#define DISABLE_INACTIVE_I
#define DISABLE_INACTIVE_J true //#define DISABLE_INACTIVE_J
#define DISABLE_INACTIVE_K true //#define DISABLE_INACTIVE_K
#define DISABLE_INACTIVE_U true //#define DISABLE_INACTIVE_U
#define DISABLE_INACTIVE_V true //#define DISABLE_INACTIVE_V
#define DISABLE_INACTIVE_W true //#define DISABLE_INACTIVE_W
#define DISABLE_INACTIVE_E true
// Default Minimum Feedrates for printing and travel moves // Default Minimum Feedrates for printing and travel moves
#define DEFAULT_MINIMUMFEEDRATE 0.0 // (mm/s) Minimum feedrate. Set with M205 S. #define DEFAULT_MINIMUMFEEDRATE 0.0 // (mm/s) Minimum feedrate. Set with M205 S.

20
config/examples/BIBO/TouchX/default/Configuration.h
View file

@ -1681,22 +1681,22 @@
// Disable axis steppers immediately when they're not being stepped. // Disable axis steppers immediately when they're not being stepped.
// WARNING: When motors turn off there is a chance of losing position accuracy! // WARNING: When motors turn off there is a chance of losing position accuracy!
#define DISABLE_X false //#define DISABLE_X
#define DISABLE_Y false //#define DISABLE_Y
#define DISABLE_Z false //#define DISABLE_Z
//#define DISABLE_I false //#define DISABLE_I
//#define DISABLE_J false //#define DISABLE_J
//#define DISABLE_K false //#define DISABLE_K
//#define DISABLE_U false //#define DISABLE_U
//#define DISABLE_V false //#define DISABLE_V
//#define DISABLE_W false //#define DISABLE_W
// Turn off the display blinking that warns about possible accuracy reduction // Turn off the display blinking that warns about possible accuracy reduction
//#define DISABLE_REDUCED_ACCURACY_WARNING //#define DISABLE_REDUCED_ACCURACY_WARNING
// @section extruder // @section extruder
#define DISABLE_E false // Disable the extruder when not stepping //#define DISABLE_E // Disable the extruder when not stepping
//#define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled //#define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled
// @section motion // @section motion

21
config/examples/BIBO/TouchX/default/Configuration_adv.h
View file

@ -1118,20 +1118,19 @@
/** /**
* Idle Stepper Shutdown * Idle Stepper Shutdown
* Set DISABLE_INACTIVE_? 'true' to shut down axis steppers after an idle period. * Enable DISABLE_INACTIVE_* to shut down axis steppers after an idle period.
* The Deactive Time can be overridden with M18 and M84. Set to 0 for No Timeout. * The Deactive Time can be overridden with M18 and M84. Set to 0 for No Timeout.
*/ */
#define DEFAULT_STEPPER_DEACTIVE_TIME 120 #define DEFAULT_STEPPER_DEACTIVE_TIME 120
#define DISABLE_INACTIVE_X true #define DISABLE_INACTIVE_X
#define DISABLE_INACTIVE_Y true #define DISABLE_INACTIVE_Y
#define DISABLE_INACTIVE_Z true // Set 'false' if the nozzle could fall onto your printed part! #define DISABLE_INACTIVE_Z // Disable if the nozzle could fall onto your printed part!
#define DISABLE_INACTIVE_I true //#define DISABLE_INACTIVE_I
#define DISABLE_INACTIVE_J true //#define DISABLE_INACTIVE_J
#define DISABLE_INACTIVE_K true //#define DISABLE_INACTIVE_K
#define DISABLE_INACTIVE_U true //#define DISABLE_INACTIVE_U
#define DISABLE_INACTIVE_V true //#define DISABLE_INACTIVE_V
#define DISABLE_INACTIVE_W true //#define DISABLE_INACTIVE_W
#define DISABLE_INACTIVE_E true
// Default Minimum Feedrates for printing and travel moves // Default Minimum Feedrates for printing and travel moves
#define DEFAULT_MINIMUMFEEDRATE 0.0 // (mm/s) Minimum feedrate. Set with M205 S. #define DEFAULT_MINIMUMFEEDRATE 0.0 // (mm/s) Minimum feedrate. Set with M205 S.

20
config/examples/BIQU/B1 SE Plus/Configuration.h
View file

@ -1679,22 +1679,22 @@
// Disable axis steppers immediately when they're not being stepped. // Disable axis steppers immediately when they're not being stepped.
// WARNING: When motors turn off there is a chance of losing position accuracy! // WARNING: When motors turn off there is a chance of losing position accuracy!
#define DISABLE_X false //#define DISABLE_X
#define DISABLE_Y false //#define DISABLE_Y
#define DISABLE_Z false //#define DISABLE_Z
//#define DISABLE_I false //#define DISABLE_I
//#define DISABLE_J false //#define DISABLE_J
//#define DISABLE_K false //#define DISABLE_K
//#define DISABLE_U false //#define DISABLE_U
//#define DISABLE_V false //#define DISABLE_V
//#define DISABLE_W false //#define DISABLE_W
// Turn off the display blinking that warns about possible accuracy reduction // Turn off the display blinking that warns about possible accuracy reduction
//#define DISABLE_REDUCED_ACCURACY_WARNING //#define DISABLE_REDUCED_ACCURACY_WARNING
// @section extruder // @section extruder
#define DISABLE_E false // Disable the extruder when not stepping //#define DISABLE_E // Disable the extruder when not stepping
#define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled #define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled
// @section motion // @section motion

21
config/examples/BIQU/B1 SE Plus/Configuration_adv.h
View file

@ -1118,20 +1118,19 @@
/** /**
* Idle Stepper Shutdown * Idle Stepper Shutdown
* Set DISABLE_INACTIVE_? 'true' to shut down axis steppers after an idle period. * Enable DISABLE_INACTIVE_* to shut down axis steppers after an idle period.
* The Deactive Time can be overridden with M18 and M84. Set to 0 for No Timeout. * The Deactive Time can be overridden with M18 and M84. Set to 0 for No Timeout.
*/ */
#define DEFAULT_STEPPER_DEACTIVE_TIME 120 #define DEFAULT_STEPPER_DEACTIVE_TIME 120
#define DISABLE_INACTIVE_X true #define DISABLE_INACTIVE_X
#define DISABLE_INACTIVE_Y true #define DISABLE_INACTIVE_Y
#define DISABLE_INACTIVE_Z true // Set 'false' if the nozzle could fall onto your printed part! #define DISABLE_INACTIVE_Z // Disable if the nozzle could fall onto your printed part!
#define DISABLE_INACTIVE_I true //#define DISABLE_INACTIVE_I
#define DISABLE_INACTIVE_J true //#define DISABLE_INACTIVE_J
#define DISABLE_INACTIVE_K true //#define DISABLE_INACTIVE_K
#define DISABLE_INACTIVE_U true //#define DISABLE_INACTIVE_U
#define DISABLE_INACTIVE_V true //#define DISABLE_INACTIVE_V
#define DISABLE_INACTIVE_W true //#define DISABLE_INACTIVE_W
#define DISABLE_INACTIVE_E true
// Default Minimum Feedrates for printing and travel moves // Default Minimum Feedrates for printing and travel moves
#define DEFAULT_MINIMUMFEEDRATE 0.0 // (mm/s) Minimum feedrate. Set with M205 S. #define DEFAULT_MINIMUMFEEDRATE 0.0 // (mm/s) Minimum feedrate. Set with M205 S.

20
config/examples/BIQU/B1 SE/Configuration.h
View file

@ -1679,22 +1679,22 @@
// Disable axis steppers immediately when they're not being stepped. // Disable axis steppers immediately when they're not being stepped.
// WARNING: When motors turn off there is a chance of losing position accuracy! // WARNING: When motors turn off there is a chance of losing position accuracy!
#define DISABLE_X false //#define DISABLE_X
#define DISABLE_Y false //#define DISABLE_Y
#define DISABLE_Z false //#define DISABLE_Z
//#define DISABLE_I false //#define DISABLE_I
//#define DISABLE_J false //#define DISABLE_J
//#define DISABLE_K false //#define DISABLE_K
//#define DISABLE_U false //#define DISABLE_U
//#define DISABLE_V false //#define DISABLE_V
//#define DISABLE_W false //#define DISABLE_W
// Turn off the display blinking that warns about possible accuracy reduction // Turn off the display blinking that warns about possible accuracy reduction
//#define DISABLE_REDUCED_ACCURACY_WARNING //#define DISABLE_REDUCED_ACCURACY_WARNING
// @section extruder // @section extruder
#define DISABLE_E false // Disable the extruder when not stepping //#define DISABLE_E // Disable the extruder when not stepping
#define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled #define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled
// @section motion // @section motion

21
config/examples/BIQU/B1 SE/Configuration_adv.h
View file

@ -1118,20 +1118,19 @@
/** /**
* Idle Stepper Shutdown * Idle Stepper Shutdown
* Set DISABLE_INACTIVE_? 'true' to shut down axis steppers after an idle period. * Enable DISABLE_INACTIVE_* to shut down axis steppers after an idle period.
* The Deactive Time can be overridden with M18 and M84. Set to 0 for No Timeout. * The Deactive Time can be overridden with M18 and M84. Set to 0 for No Timeout.
*/ */
#define DEFAULT_STEPPER_DEACTIVE_TIME 120 #define DEFAULT_STEPPER_DEACTIVE_TIME 120
#define DISABLE_INACTIVE_X true #define DISABLE_INACTIVE_X
#define DISABLE_INACTIVE_Y true #define DISABLE_INACTIVE_Y
#define DISABLE_INACTIVE_Z true // Set 'false' if the nozzle could fall onto your printed part! #define DISABLE_INACTIVE_Z // Disable if the nozzle could fall onto your printed part!
#define DISABLE_INACTIVE_I true //#define DISABLE_INACTIVE_I
#define DISABLE_INACTIVE_J true //#define DISABLE_INACTIVE_J
#define DISABLE_INACTIVE_K true //#define DISABLE_INACTIVE_K
#define DISABLE_INACTIVE_U true //#define DISABLE_INACTIVE_U
#define DISABLE_INACTIVE_V true //#define DISABLE_INACTIVE_V
#define DISABLE_INACTIVE_W true //#define DISABLE_INACTIVE_W
#define DISABLE_INACTIVE_E true
// Default Minimum Feedrates for printing and travel moves // Default Minimum Feedrates for printing and travel moves
#define DEFAULT_MINIMUMFEEDRATE 0.0 // (mm/s) Minimum feedrate. Set with M205 S. #define DEFAULT_MINIMUMFEEDRATE 0.0 // (mm/s) Minimum feedrate. Set with M205 S.

20
config/examples/BIQU/B1/Configuration.h
View file

@ -1696,22 +1696,22 @@
// Disable axis steppers immediately when they're not being stepped. // Disable axis steppers immediately when they're not being stepped.
// WARNING: When motors turn off there is a chance of losing position accuracy! // WARNING: When motors turn off there is a chance of losing position accuracy!
#define DISABLE_X false //#define DISABLE_X
#define DISABLE_Y false //#define DISABLE_Y
#define DISABLE_Z false //#define DISABLE_Z
//#define DISABLE_I false //#define DISABLE_I
//#define DISABLE_J false //#define DISABLE_J
//#define DISABLE_K false //#define DISABLE_K
//#define DISABLE_U false //#define DISABLE_U
//#define DISABLE_V false //#define DISABLE_V
//#define DISABLE_W false //#define DISABLE_W
// Turn off the display blinking that warns about possible accuracy reduction // Turn off the display blinking that warns about possible accuracy reduction
//#define DISABLE_REDUCED_ACCURACY_WARNING //#define DISABLE_REDUCED_ACCURACY_WARNING
// @section extruder // @section extruder
#define DISABLE_E false // Disable the extruder when not stepping //#define DISABLE_E // Disable the extruder when not stepping
#define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled #define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled
// @section motion // @section motion

21
config/examples/BIQU/B1/Configuration_adv.h
View file

@ -1118,20 +1118,19 @@
/** /**
* Idle Stepper Shutdown * Idle Stepper Shutdown
* Set DISABLE_INACTIVE_? 'true' to shut down axis steppers after an idle period. * Enable DISABLE_INACTIVE_* to shut down axis steppers after an idle period.
* The Deactive Time can be overridden with M18 and M84. Set to 0 for No Timeout. * The Deactive Time can be overridden with M18 and M84. Set to 0 for No Timeout.
*/ */
#define DEFAULT_STEPPER_DEACTIVE_TIME 120 #define DEFAULT_STEPPER_DEACTIVE_TIME 120
#define DISABLE_INACTIVE_X true #define DISABLE_INACTIVE_X
#define DISABLE_INACTIVE_Y true #define DISABLE_INACTIVE_Y
#define DISABLE_INACTIVE_Z true // Set 'false' if the nozzle could fall onto your printed part! #define DISABLE_INACTIVE_Z // Disable if the nozzle could fall onto your printed part!
#define DISABLE_INACTIVE_I true //#define DISABLE_INACTIVE_I
#define DISABLE_INACTIVE_J true //#define DISABLE_INACTIVE_J
#define DISABLE_INACTIVE_K true //#define DISABLE_INACTIVE_K
#define DISABLE_INACTIVE_U true //#define DISABLE_INACTIVE_U
#define DISABLE_INACTIVE_V true //#define DISABLE_INACTIVE_V
#define DISABLE_INACTIVE_W true //#define DISABLE_INACTIVE_W
#define DISABLE_INACTIVE_E true
// Default Minimum Feedrates for printing and travel moves // Default Minimum Feedrates for printing and travel moves
#define DEFAULT_MINIMUMFEEDRATE 0.0 // (mm/s) Minimum feedrate. Set with M205 S. #define DEFAULT_MINIMUMFEEDRATE 0.0 // (mm/s) Minimum feedrate. Set with M205 S.

20
config/examples/BIQU/BX/Configuration.h
View file

@ -1688,22 +1688,22 @@
// Disable axis steppers immediately when they're not being stepped. // Disable axis steppers immediately when they're not being stepped.
// WARNING: When motors turn off there is a chance of losing position accuracy! // WARNING: When motors turn off there is a chance of losing position accuracy!
#define DISABLE_X false //#define DISABLE_X
#define DISABLE_Y false //#define DISABLE_Y
#define DISABLE_Z false //#define DISABLE_Z
//#define DISABLE_I false //#define DISABLE_I
//#define DISABLE_J false //#define DISABLE_J
//#define DISABLE_K false //#define DISABLE_K
//#define DISABLE_U false //#define DISABLE_U
//#define DISABLE_V false //#define DISABLE_V
//#define DISABLE_W false //#define DISABLE_W
// Turn off the display blinking that warns about possible accuracy reduction // Turn off the display blinking that warns about possible accuracy reduction
//#define DISABLE_REDUCED_ACCURACY_WARNING //#define DISABLE_REDUCED_ACCURACY_WARNING
// @section extruder // @section extruder
#define DISABLE_E false // Disable the extruder when not stepping //#define DISABLE_E // Disable the extruder when not stepping
#define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled #define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled
// @section motion // @section motion

21
config/examples/BIQU/BX/Configuration_adv.h
View file

@ -1119,20 +1119,19 @@
/** /**
* Idle Stepper Shutdown * Idle Stepper Shutdown
* Set DISABLE_INACTIVE_? 'true' to shut down axis steppers after an idle period. * Enable DISABLE_INACTIVE_* to shut down axis steppers after an idle period.
* The Deactive Time can be overridden with M18 and M84. Set to 0 for No Timeout. * The Deactive Time can be overridden with M18 and M84. Set to 0 for No Timeout.
*/ */
#define DEFAULT_STEPPER_DEACTIVE_TIME 120 #define DEFAULT_STEPPER_DEACTIVE_TIME 120
#define DISABLE_INACTIVE_X true #define DISABLE_INACTIVE_X
#define DISABLE_INACTIVE_Y true #define DISABLE_INACTIVE_Y
#define DISABLE_INACTIVE_Z false // Set 'false' if the nozzle could fall onto your printed part! //#define DISABLE_INACTIVE_Z // Disable if the nozzle could fall onto your printed part!
#define DISABLE_INACTIVE_I true //#define DISABLE_INACTIVE_I
#define DISABLE_INACTIVE_J true //#define DISABLE_INACTIVE_J
#define DISABLE_INACTIVE_K true //#define DISABLE_INACTIVE_K
#define DISABLE_INACTIVE_U true //#define DISABLE_INACTIVE_U
#define DISABLE_INACTIVE_V true //#define DISABLE_INACTIVE_V
#define DISABLE_INACTIVE_W true //#define DISABLE_INACTIVE_W
#define DISABLE_INACTIVE_E true
// Default Minimum Feedrates for printing and travel moves // Default Minimum Feedrates for printing and travel moves
#define DEFAULT_MINIMUMFEEDRATE 0.0 // (mm/s) Minimum feedrate. Set with M205 S. #define DEFAULT_MINIMUMFEEDRATE 0.0 // (mm/s) Minimum feedrate. Set with M205 S.

20
config/examples/BIQU/Hurakan/Configuration.h
View file

@ -1681,22 +1681,22 @@
// Disable axis steppers immediately when they're not being stepped. // Disable axis steppers immediately when they're not being stepped.
// WARNING: When motors turn off there is a chance of losing position accuracy! // WARNING: When motors turn off there is a chance of losing position accuracy!
#define DISABLE_X false //#define DISABLE_X
#define DISABLE_Y false //#define DISABLE_Y
#define DISABLE_Z false //#define DISABLE_Z
//#define DISABLE_I false //#define DISABLE_I
//#define DISABLE_J false //#define DISABLE_J
//#define DISABLE_K false //#define DISABLE_K
//#define DISABLE_U false //#define DISABLE_U
//#define DISABLE_V false //#define DISABLE_V
//#define DISABLE_W false //#define DISABLE_W
// Turn off the display blinking that warns about possible accuracy reduction // Turn off the display blinking that warns about possible accuracy reduction
//#define DISABLE_REDUCED_ACCURACY_WARNING //#define DISABLE_REDUCED_ACCURACY_WARNING
// @section extruder // @section extruder
#define DISABLE_E false // Disable the extruder when not stepping //#define DISABLE_E // Disable the extruder when not stepping
#define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled #define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled
// @section motion // @section motion

21
config/examples/BIQU/Hurakan/Configuration_adv.h
View file

@ -1119,20 +1119,19 @@
/** /**
* Idle Stepper Shutdown * Idle Stepper Shutdown
* Set DISABLE_INACTIVE_? 'true' to shut down axis steppers after an idle period. * Enable DISABLE_INACTIVE_* to shut down axis steppers after an idle period.
* The Deactive Time can be overridden with M18 and M84. Set to 0 for No Timeout. * The Deactive Time can be overridden with M18 and M84. Set to 0 for No Timeout.
*/ */
#define DEFAULT_STEPPER_DEACTIVE_TIME 120 #define DEFAULT_STEPPER_DEACTIVE_TIME 120
#define DISABLE_INACTIVE_X true #define DISABLE_INACTIVE_X
#define DISABLE_INACTIVE_Y true #define DISABLE_INACTIVE_Y
#define DISABLE_INACTIVE_Z true // Set 'false' if the nozzle could fall onto your printed part! #define DISABLE_INACTIVE_Z // Disable if the nozzle could fall onto your printed part!
#define DISABLE_INACTIVE_I true //#define DISABLE_INACTIVE_I
#define DISABLE_INACTIVE_J true //#define DISABLE_INACTIVE_J
#define DISABLE_INACTIVE_K true //#define DISABLE_INACTIVE_K
#define DISABLE_INACTIVE_U true //#define DISABLE_INACTIVE_U
#define DISABLE_INACTIVE_V true //#define DISABLE_INACTIVE_V
#define DISABLE_INACTIVE_W true //#define DISABLE_INACTIVE_W
#define DISABLE_INACTIVE_E true
// Default Minimum Feedrates for printing and travel moves // Default Minimum Feedrates for printing and travel moves
#define DEFAULT_MINIMUMFEEDRATE 0.0 // (mm/s) Minimum feedrate. Set with M205 S. #define DEFAULT_MINIMUMFEEDRATE 0.0 // (mm/s) Minimum feedrate. Set with M205 S.

20
config/examples/BIQU/Thunder Standard/Configuration.h
View file

@ -1681,22 +1681,22 @@
// Disable axis steppers immediately when they're not being stepped. // Disable axis steppers immediately when they're not being stepped.
// WARNING: When motors turn off there is a chance of losing position accuracy! // WARNING: When motors turn off there is a chance of losing position accuracy!
#define DISABLE_X false //#define DISABLE_X
#define DISABLE_Y false //#define DISABLE_Y
#define DISABLE_Z false //#define DISABLE_Z
//#define DISABLE_I false //#define DISABLE_I
//#define DISABLE_J false //#define DISABLE_J
//#define DISABLE_K false //#define DISABLE_K
//#define DISABLE_U false //#define DISABLE_U
//#define DISABLE_V false //#define DISABLE_V
//#define DISABLE_W false //#define DISABLE_W
// Turn off the display blinking that warns about possible accuracy reduction // Turn off the display blinking that warns about possible accuracy reduction
//#define DISABLE_REDUCED_ACCURACY_WARNING //#define DISABLE_REDUCED_ACCURACY_WARNING
// @section extruder // @section extruder
#define DISABLE_E false // Disable the extruder when not stepping //#define DISABLE_E // Disable the extruder when not stepping
#define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled #define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled
// @section motion // @section motion

21
config/examples/BIQU/Thunder Standard/Configuration_adv.h
View file

@ -1118,20 +1118,19 @@
/** /**
* Idle Stepper Shutdown * Idle Stepper Shutdown
* Set DISABLE_INACTIVE_? 'true' to shut down axis steppers after an idle period. * Enable DISABLE_INACTIVE_* to shut down axis steppers after an idle period.
* The Deactive Time can be overridden with M18 and M84. Set to 0 for No Timeout. * The Deactive Time can be overridden with M18 and M84. Set to 0 for No Timeout.
*/ */
#define DEFAULT_STEPPER_DEACTIVE_TIME 120 #define DEFAULT_STEPPER_DEACTIVE_TIME 120
#define DISABLE_INACTIVE_X true #define DISABLE_INACTIVE_X
#define DISABLE_INACTIVE_Y true #define DISABLE_INACTIVE_Y
#define DISABLE_INACTIVE_Z true // Set 'false' if the nozzle could fall onto your printed part! #define DISABLE_INACTIVE_Z // Disable if the nozzle could fall onto your printed part!
#define DISABLE_INACTIVE_I true //#define DISABLE_INACTIVE_I
#define DISABLE_INACTIVE_J true //#define DISABLE_INACTIVE_J
#define DISABLE_INACTIVE_K true //#define DISABLE_INACTIVE_K
#define DISABLE_INACTIVE_U true //#define DISABLE_INACTIVE_U
#define DISABLE_INACTIVE_V true //#define DISABLE_INACTIVE_V
#define DISABLE_INACTIVE_W true //#define DISABLE_INACTIVE_W
#define DISABLE_INACTIVE_E true
// Default Minimum Feedrates for printing and travel moves // Default Minimum Feedrates for printing and travel moves
#define DEFAULT_MINIMUMFEEDRATE 0.0 // (mm/s) Minimum feedrate. Set with M205 S. #define DEFAULT_MINIMUMFEEDRATE 0.0 // (mm/s) Minimum feedrate. Set with M205 S.

20
config/examples/BQ/Hephestos/Configuration.h
View file

@ -1682,22 +1682,22 @@
// Disable axis steppers immediately when they're not being stepped. // Disable axis steppers immediately when they're not being stepped.
// WARNING: When motors turn off there is a chance of losing position accuracy! // WARNING: When motors turn off there is a chance of losing position accuracy!
#define DISABLE_X false //#define DISABLE_X
#define DISABLE_Y false //#define DISABLE_Y
#define DISABLE_Z false //#define DISABLE_Z
//#define DISABLE_I false //#define DISABLE_I
//#define DISABLE_J false //#define DISABLE_J
//#define DISABLE_K false //#define DISABLE_K
//#define DISABLE_U false //#define DISABLE_U
//#define DISABLE_V false //#define DISABLE_V
//#define DISABLE_W false //#define DISABLE_W
// Turn off the display blinking that warns about possible accuracy reduction // Turn off the display blinking that warns about possible accuracy reduction
//#define DISABLE_REDUCED_ACCURACY_WARNING //#define DISABLE_REDUCED_ACCURACY_WARNING
// @section extruder // @section extruder
#define DISABLE_E false // Disable the extruder when not stepping //#define DISABLE_E // Disable the extruder when not stepping
#define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled #define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled
// @section motion // @section motion

21
config/examples/BQ/Hephestos/Configuration_adv.h
View file

@ -1118,20 +1118,19 @@
/** /**
* Idle Stepper Shutdown * Idle Stepper Shutdown
* Set DISABLE_INACTIVE_? 'true' to shut down axis steppers after an idle period. * Enable DISABLE_INACTIVE_* to shut down axis steppers after an idle period.
* The Deactive Time can be overridden with M18 and M84. Set to 0 for No Timeout. * The Deactive Time can be overridden with M18 and M84. Set to 0 for No Timeout.
*/ */
#define DEFAULT_STEPPER_DEACTIVE_TIME 60 #define DEFAULT_STEPPER_DEACTIVE_TIME 60
#define DISABLE_INACTIVE_X true #define DISABLE_INACTIVE_X
#define DISABLE_INACTIVE_Y true #define DISABLE_INACTIVE_Y
#define DISABLE_INACTIVE_Z true // Set 'false' if the nozzle could fall onto your printed part! #define DISABLE_INACTIVE_Z // Disable if the nozzle could fall onto your printed part!
#define DISABLE_INACTIVE_I true //#define DISABLE_INACTIVE_I
#define DISABLE_INACTIVE_J true //#define DISABLE_INACTIVE_J
#define DISABLE_INACTIVE_K true //#define DISABLE_INACTIVE_K
#define DISABLE_INACTIVE_U true //#define DISABLE_INACTIVE_U
#define DISABLE_INACTIVE_V true //#define DISABLE_INACTIVE_V
#define DISABLE_INACTIVE_W true //#define DISABLE_INACTIVE_W
#define DISABLE_INACTIVE_E true
// Default Minimum Feedrates for printing and travel moves // Default Minimum Feedrates for printing and travel moves
#define DEFAULT_MINIMUMFEEDRATE 0.0 // (mm/s) Minimum feedrate. Set with M205 S. #define DEFAULT_MINIMUMFEEDRATE 0.0 // (mm/s) Minimum feedrate. Set with M205 S.

20
config/examples/BQ/Hephestos_2/Configuration.h
View file

@ -1695,22 +1695,22 @@
// Disable axis steppers immediately when they're not being stepped. // Disable axis steppers immediately when they're not being stepped.
// WARNING: When motors turn off there is a chance of losing position accuracy! // WARNING: When motors turn off there is a chance of losing position accuracy!
#define DISABLE_X false //#define DISABLE_X
#define DISABLE_Y false //#define DISABLE_Y
#define DISABLE_Z false //#define DISABLE_Z
//#define DISABLE_I false //#define DISABLE_I
//#define DISABLE_J false //#define DISABLE_J
//#define DISABLE_K false //#define DISABLE_K
//#define DISABLE_U false //#define DISABLE_U
//#define DISABLE_V false //#define DISABLE_V
//#define DISABLE_W false //#define DISABLE_W
// Turn off the display blinking that warns about possible accuracy reduction // Turn off the display blinking that warns about possible accuracy reduction
//#define DISABLE_REDUCED_ACCURACY_WARNING //#define DISABLE_REDUCED_ACCURACY_WARNING
// @section extruder // @section extruder
#define DISABLE_E false // Disable the extruder when not stepping //#define DISABLE_E // Disable the extruder when not stepping
#define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled #define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled
// @section motion // @section motion

21
config/examples/BQ/Hephestos_2/Configuration_adv.h
View file

@ -1118,20 +1118,19 @@
/** /**
* Idle Stepper Shutdown * Idle Stepper Shutdown
* Set DISABLE_INACTIVE_? 'true' to shut down axis steppers after an idle period. * Enable DISABLE_INACTIVE_* to shut down axis steppers after an idle period.
* The Deactive Time can be overridden with M18 and M84. Set to 0 for No Timeout. * The Deactive Time can be overridden with M18 and M84. Set to 0 for No Timeout.
*/ */
#define DEFAULT_STEPPER_DEACTIVE_TIME 300 #define DEFAULT_STEPPER_DEACTIVE_TIME 300
#define DISABLE_INACTIVE_X false //#define DISABLE_INACTIVE_X
#define DISABLE_INACTIVE_Y false //#define DISABLE_INACTIVE_Y
#define DISABLE_INACTIVE_Z false // Set 'false' if the nozzle could fall onto your printed part! //#define DISABLE_INACTIVE_Z // Disable if the nozzle could fall onto your printed part!
#define DISABLE_INACTIVE_I true //#define DISABLE_INACTIVE_I
#define DISABLE_INACTIVE_J true //#define DISABLE_INACTIVE_J
#define DISABLE_INACTIVE_K true //#define DISABLE_INACTIVE_K
#define DISABLE_INACTIVE_U true //#define DISABLE_INACTIVE_U
#define DISABLE_INACTIVE_V true //#define DISABLE_INACTIVE_V
#define DISABLE_INACTIVE_W true //#define DISABLE_INACTIVE_W
#define DISABLE_INACTIVE_E true
// Default Minimum Feedrates for printing and travel moves // Default Minimum Feedrates for printing and travel moves
#define DEFAULT_MINIMUMFEEDRATE 0.0 // (mm/s) Minimum feedrate. Set with M205 S. #define DEFAULT_MINIMUMFEEDRATE 0.0 // (mm/s) Minimum feedrate. Set with M205 S.

20
config/examples/BQ/WITBOX/Configuration.h
View file

@ -1682,22 +1682,22 @@
// Disable axis steppers immediately when they're not being stepped. // Disable axis steppers immediately when they're not being stepped.
// WARNING: When motors turn off there is a chance of losing position accuracy! // WARNING: When motors turn off there is a chance of losing position accuracy!
#define DISABLE_X false //#define DISABLE_X
#define DISABLE_Y false //#define DISABLE_Y
#define DISABLE_Z true #define DISABLE_Z
//#define DISABLE_I false //#define DISABLE_I
//#define DISABLE_J false //#define DISABLE_J
//#define DISABLE_K false //#define DISABLE_K
//#define DISABLE_U false //#define DISABLE_U
//#define DISABLE_V false //#define DISABLE_V
//#define DISABLE_W false //#define DISABLE_W
// Turn off the display blinking that warns about possible accuracy reduction // Turn off the display blinking that warns about possible accuracy reduction
//#define DISABLE_REDUCED_ACCURACY_WARNING //#define DISABLE_REDUCED_ACCURACY_WARNING
// @section extruder // @section extruder
#define DISABLE_E false // Disable the extruder when not stepping //#define DISABLE_E // Disable the extruder when not stepping
#define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled #define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled
// @section motion // @section motion

21
config/examples/BQ/WITBOX/Configuration_adv.h
View file

@ -1118,20 +1118,19 @@
/** /**
* Idle Stepper Shutdown * Idle Stepper Shutdown
* Set DISABLE_INACTIVE_? 'true' to shut down axis steppers after an idle period. * Enable DISABLE_INACTIVE_* to shut down axis steppers after an idle period.
* The Deactive Time can be overridden with M18 and M84. Set to 0 for No Timeout. * The Deactive Time can be overridden with M18 and M84. Set to 0 for No Timeout.
*/ */
#define DEFAULT_STEPPER_DEACTIVE_TIME 60 #define DEFAULT_STEPPER_DEACTIVE_TIME 60
#define DISABLE_INACTIVE_X true #define DISABLE_INACTIVE_X
#define DISABLE_INACTIVE_Y true #define DISABLE_INACTIVE_Y
#define DISABLE_INACTIVE_Z true // Set 'false' if the nozzle could fall onto your printed part! #define DISABLE_INACTIVE_Z // Disable if the nozzle could fall onto your printed part!
#define DISABLE_INACTIVE_I true //#define DISABLE_INACTIVE_I
#define DISABLE_INACTIVE_J true //#define DISABLE_INACTIVE_J
#define DISABLE_INACTIVE_K true //#define DISABLE_INACTIVE_K
#define DISABLE_INACTIVE_U true //#define DISABLE_INACTIVE_U
#define DISABLE_INACTIVE_V true //#define DISABLE_INACTIVE_V
#define DISABLE_INACTIVE_W true //#define DISABLE_INACTIVE_W
#define DISABLE_INACTIVE_E true
// Default Minimum Feedrates for printing and travel moves // Default Minimum Feedrates for printing and travel moves
#define DEFAULT_MINIMUMFEEDRATE 0.0 // (mm/s) Minimum feedrate. Set with M205 S. #define DEFAULT_MINIMUMFEEDRATE 0.0 // (mm/s) Minimum feedrate. Set with M205 S.

Some files were not shown because too many files have changed in this diff Show more