3D-printing/Configurations
1
0
Fork 0
mirror of https://github.com/MarlinFirmware/Configurations.git synced 2025-07-23 22:54:11 -06:00
Code Issues Projects Releases Packages Wiki Activity Actions

🎨 Clean up whitespace

Browse source
This commit is contained in:
Scott Lahteine 2022-05-04 18:18:34 -05:00
parent c31ece21d9
commit 22d8f2cc6f
29 changed files with 31 additions and 32 deletions
Download patch file Download diff file Expand all files Collapse all files

2
config/examples/AnyCubic/Chiron/Configuration_adv.h
View file

@ -1053,7 +1053,7 @@
#define DEFAULT_STEPPER_DEACTIVE_TIME 120
#define DISABLE_INACTIVE_X true
#define DISABLE_INACTIVE_Y true
#define DISABLE_INACTIVE_Z false // Set 'false' if the nozzle could fall onto your printed part!
#define DISABLE_INACTIVE_Z false // Set 'false' if the nozzle could fall onto your printed part!
#define DISABLE_INACTIVE_I true
#define DISABLE_INACTIVE_J true
#define DISABLE_INACTIVE_K true

2
config/examples/BIQU/BX/Configuration_adv.h
View file

@ -1053,7 +1053,7 @@
#define DEFAULT_STEPPER_DEACTIVE_TIME 120
#define DISABLE_INACTIVE_X true
#define DISABLE_INACTIVE_Y true
#define DISABLE_INACTIVE_Z false // Set 'false' if the nozzle could fall onto your printed part!
#define DISABLE_INACTIVE_Z false // Set 'false' if the nozzle could fall onto your printed part!
#define DISABLE_INACTIVE_I true
#define DISABLE_INACTIVE_J true
#define DISABLE_INACTIVE_K true

2
config/examples/BQ/Hephestos_2/Configuration_adv.h
View file

@ -1053,7 +1053,7 @@
#define DEFAULT_STEPPER_DEACTIVE_TIME 300
#define DISABLE_INACTIVE_X false
#define DISABLE_INACTIVE_Y false
#define DISABLE_INACTIVE_Z false // Set 'false' if the nozzle could fall onto your printed part!
#define DISABLE_INACTIVE_Z false // Set 'false' if the nozzle could fall onto your printed part!
#define DISABLE_INACTIVE_I true
#define DISABLE_INACTIVE_J true
#define DISABLE_INACTIVE_K true

2
config/examples/Creality/CR-8/Configuration_adv.h
View file

@ -1053,7 +1053,7 @@
#define DEFAULT_STEPPER_DEACTIVE_TIME 120
#define DISABLE_INACTIVE_X true
#define DISABLE_INACTIVE_Y true
#define DISABLE_INACTIVE_Z false // Set 'false' if the nozzle could fall onto your printed part!
#define DISABLE_INACTIVE_Z false // Set 'false' if the nozzle could fall onto your printed part!
#define DISABLE_INACTIVE_I true
#define DISABLE_INACTIVE_J true
#define DISABLE_INACTIVE_K true

1
config/examples/Creality/Ender-3 S1/Configuration.h
View file

@ -101,7 +101,6 @@
#define MOTHERBOARD BOARD_CREALITY_V24S1_301
#endif
/**
* Select the serial port on the board to use for communication with the host.
* This allows the connection of wireless adapters (for instance) to non-default port pins.

2
config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Dual Z/Configuration_adv.h
View file

@ -1053,7 +1053,7 @@
#define DEFAULT_STEPPER_DEACTIVE_TIME 120
#define DISABLE_INACTIVE_X true
#define DISABLE_INACTIVE_Y true
#define DISABLE_INACTIVE_Z false // Set 'false' if the nozzle could fall onto your printed part!
#define DISABLE_INACTIVE_Z false // Set 'false' if the nozzle could fall onto your printed part!
#define DISABLE_INACTIVE_I true
#define DISABLE_INACTIVE_J true
#define DISABLE_INACTIVE_K true

2
config/examples/Creality/Ender-4/Configuration_adv.h
View file

@ -1053,7 +1053,7 @@
#define DEFAULT_STEPPER_DEACTIVE_TIME 300
#define DISABLE_INACTIVE_X true
#define DISABLE_INACTIVE_Y true
#define DISABLE_INACTIVE_Z false // Set 'false' if the nozzle could fall onto your printed part!
#define DISABLE_INACTIVE_Z false // Set 'false' if the nozzle could fall onto your printed part!
#define DISABLE_INACTIVE_I true
#define DISABLE_INACTIVE_J true
#define DISABLE_INACTIVE_K true

2
config/examples/Creality/Ender-5 Plus/Configuration_adv.h
View file

@ -1053,7 +1053,7 @@
#define DEFAULT_STEPPER_DEACTIVE_TIME 120
#define DISABLE_INACTIVE_X true
#define DISABLE_INACTIVE_Y true
#define DISABLE_INACTIVE_Z false // Set 'false' if the nozzle could fall onto your printed part!
#define DISABLE_INACTIVE_Z false // Set 'false' if the nozzle could fall onto your printed part!
#define DISABLE_INACTIVE_I true
#define DISABLE_INACTIVE_J true
#define DISABLE_INACTIVE_K true

2
config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 2.0 with BLTouch/Configuration_adv.h
View file

@ -1053,7 +1053,7 @@
#define DEFAULT_STEPPER_DEACTIVE_TIME 120
#define DISABLE_INACTIVE_X true
#define DISABLE_INACTIVE_Y true
#define DISABLE_INACTIVE_Z false // Set 'false' if the nozzle could fall onto your printed part!
#define DISABLE_INACTIVE_Z false // Set 'false' if the nozzle could fall onto your printed part!
#define DISABLE_INACTIVE_I true
#define DISABLE_INACTIVE_J true
#define DISABLE_INACTIVE_K true

2
config/examples/Creality/Ender-5 Pro/CrealityV1/Configuration_adv.h
View file

@ -1053,7 +1053,7 @@
#define DEFAULT_STEPPER_DEACTIVE_TIME 120
#define DISABLE_INACTIVE_X true
#define DISABLE_INACTIVE_Y true
#define DISABLE_INACTIVE_Z false // Set 'false' if the nozzle could fall onto your printed part!
#define DISABLE_INACTIVE_Z false // Set 'false' if the nozzle could fall onto your printed part!
#define DISABLE_INACTIVE_I true
#define DISABLE_INACTIVE_J true
#define DISABLE_INACTIVE_K true

2
config/examples/Creality/Ender-5 Pro/CrealityV422/Configuration_adv.h
View file

@ -1053,7 +1053,7 @@
#define DEFAULT_STEPPER_DEACTIVE_TIME 120
#define DISABLE_INACTIVE_X true
#define DISABLE_INACTIVE_Y true
#define DISABLE_INACTIVE_Z false // Set 'false' if the nozzle could fall onto your printed part!
#define DISABLE_INACTIVE_Z false // Set 'false' if the nozzle could fall onto your printed part!
#define DISABLE_INACTIVE_I true
#define DISABLE_INACTIVE_J true
#define DISABLE_INACTIVE_K true

2
config/examples/Creality/Ender-5 Pro/CrealityV427/Configuration_adv.h
View file

@ -1053,7 +1053,7 @@
#define DEFAULT_STEPPER_DEACTIVE_TIME 120
#define DISABLE_INACTIVE_X true
#define DISABLE_INACTIVE_Y true
#define DISABLE_INACTIVE_Z false // Set 'false' if the nozzle could fall onto your printed part!
#define DISABLE_INACTIVE_Z false // Set 'false' if the nozzle could fall onto your printed part!
#define DISABLE_INACTIVE_I true
#define DISABLE_INACTIVE_J true
#define DISABLE_INACTIVE_K true

2
config/examples/Creality/Ender-5/CrealityV1/Configuration_adv.h
View file

@ -1053,7 +1053,7 @@
#define DEFAULT_STEPPER_DEACTIVE_TIME 120
#define DISABLE_INACTIVE_X true
#define DISABLE_INACTIVE_Y true
#define DISABLE_INACTIVE_Z false // Set 'false' if the nozzle could fall onto your printed part!
#define DISABLE_INACTIVE_Z false // Set 'false' if the nozzle could fall onto your printed part!
#define DISABLE_INACTIVE_I true
#define DISABLE_INACTIVE_J true
#define DISABLE_INACTIVE_K true

2
config/examples/Creality/Ender-5/CrealityV427/Configuration_adv.h
View file

@ -1053,7 +1053,7 @@
#define DEFAULT_STEPPER_DEACTIVE_TIME 120
#define DISABLE_INACTIVE_X true
#define DISABLE_INACTIVE_Y true
#define DISABLE_INACTIVE_Z false // Set 'false' if the nozzle could fall onto your printed part!
#define DISABLE_INACTIVE_Z false // Set 'false' if the nozzle could fall onto your printed part!
#define DISABLE_INACTIVE_I true
#define DISABLE_INACTIVE_J true
#define DISABLE_INACTIVE_K true

6
config/examples/Eryone/Thinker SE/Configuration.h
View file

@ -1491,8 +1491,8 @@
// @section homing
#define NO_MOTION_BEFORE_HOMING // Inhibit movement until all axes have been homed. Also enable HOME_AFTER_DEACTIVATE for extra safety.
#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated. Also enable NO_MOTION_BEFORE_HOMING for extra safety.
#define NO_MOTION_BEFORE_HOMING // Inhibit movement until all axes have been homed. Also enable HOME_AFTER_DEACTIVATE for extra safety.
#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated. Also enable NO_MOTION_BEFORE_HOMING for extra safety.
/**
* Set Z_IDLE_HEIGHT if the Z-Axis moves on its own when steppers are disabled.
@ -1504,7 +1504,7 @@
//#define Z_HOMING_HEIGHT 4 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ...
// Be sure to have this much clearance over your Z_MAX_POS to prevent grinding.
#define Z_AFTER_HOMING 10 // (mm) Height to move to after homing Z
#define Z_AFTER_HOMING 10 // (mm) Height to move to after homing Z
// Direction of endstops when homing; 1=MAX, -1=MIN
// :[-1,1]

2
config/examples/FlashForge/Creator 2X/Configuration_adv.h
View file

@ -1053,7 +1053,7 @@
#define DEFAULT_STEPPER_DEACTIVE_TIME 120
#define DISABLE_INACTIVE_X true
#define DISABLE_INACTIVE_Y true
#define DISABLE_INACTIVE_Z false // Set 'false' if the nozzle could fall onto your printed part!
#define DISABLE_INACTIVE_Z false // Set 'false' if the nozzle could fall onto your printed part!
#define DISABLE_INACTIVE_I true
#define DISABLE_INACTIVE_J true
#define DISABLE_INACTIVE_K true

2
config/examples/FlashForge/CreatorPro/Configuration_adv.h
View file

@ -1053,7 +1053,7 @@
#define DEFAULT_STEPPER_DEACTIVE_TIME 120
#define DISABLE_INACTIVE_X true
#define DISABLE_INACTIVE_Y true
#define DISABLE_INACTIVE_Z false // Set 'false' if the nozzle could fall onto your printed part!
#define DISABLE_INACTIVE_Z false // Set 'false' if the nozzle could fall onto your printed part!
#define DISABLE_INACTIVE_I true
#define DISABLE_INACTIVE_J true
#define DISABLE_INACTIVE_K true

2
config/examples/MBot/Cube/Configuration_adv.h
View file

@ -1053,7 +1053,7 @@
#define DEFAULT_STEPPER_DEACTIVE_TIME 120
#define DISABLE_INACTIVE_X true
#define DISABLE_INACTIVE_Y true
#define DISABLE_INACTIVE_Z false // Set 'false' if the nozzle could fall onto your printed part!
#define DISABLE_INACTIVE_Z false // Set 'false' if the nozzle could fall onto your printed part!
#define DISABLE_INACTIVE_I true
#define DISABLE_INACTIVE_J true
#define DISABLE_INACTIVE_K true

2
config/examples/Prusa/MK3S-BigTreeTech-BTT002/Configuration_adv.h
View file

@ -1053,7 +1053,7 @@
#define DEFAULT_STEPPER_DEACTIVE_TIME 120
#define DISABLE_INACTIVE_X true
#define DISABLE_INACTIVE_Y true
#define DISABLE_INACTIVE_Z false // Set 'false' if the nozzle could fall onto your printed part!
#define DISABLE_INACTIVE_Z false // Set 'false' if the nozzle could fall onto your printed part!
#define DISABLE_INACTIVE_I true
#define DISABLE_INACTIVE_J true
#define DISABLE_INACTIVE_K true

2
config/examples/Qidi/Qidi 1/Configuration_adv.h
View file

@ -1053,7 +1053,7 @@
#define DEFAULT_STEPPER_DEACTIVE_TIME 120
#define DISABLE_INACTIVE_X true
#define DISABLE_INACTIVE_Y true
#define DISABLE_INACTIVE_Z false // Set 'false' if the nozzle could fall onto your printed part!
#define DISABLE_INACTIVE_Z false // Set 'false' if the nozzle could fall onto your printed part!
#define DISABLE_INACTIVE_I true
#define DISABLE_INACTIVE_J true
#define DISABLE_INACTIVE_K true

2
config/examples/Wanhao/Duplicator 4S/Configuration_adv.h
View file

@ -1053,7 +1053,7 @@
#define DEFAULT_STEPPER_DEACTIVE_TIME 120
#define DISABLE_INACTIVE_X true
#define DISABLE_INACTIVE_Y true
#define DISABLE_INACTIVE_Z false // Set 'false' if the nozzle could fall onto your printed part!
#define DISABLE_INACTIVE_Z false // Set 'false' if the nozzle could fall onto your printed part!
#define DISABLE_INACTIVE_I true
#define DISABLE_INACTIVE_J true
#define DISABLE_INACTIVE_K true

2
config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (TMC2209)/Configuration_adv.h
View file

@ -1053,7 +1053,7 @@
#define DEFAULT_STEPPER_DEACTIVE_TIME 120
#define DISABLE_INACTIVE_X true
#define DISABLE_INACTIVE_Y true
#define DISABLE_INACTIVE_Z false // Set 'false' if the nozzle could fall onto your printed part!
#define DISABLE_INACTIVE_Z false // Set 'false' if the nozzle could fall onto your printed part!
#define DISABLE_INACTIVE_I true
#define DISABLE_INACTIVE_J true
#define DISABLE_INACTIVE_K true

2
config/examples/delta/Anycubic/Predator/Configuration_adv.h
View file

@ -1053,7 +1053,7 @@
#define DEFAULT_STEPPER_DEACTIVE_TIME 120
#define DISABLE_INACTIVE_X false
#define DISABLE_INACTIVE_Y false
#define DISABLE_INACTIVE_Z false // Set 'false' if the nozzle could fall onto your printed part!
#define DISABLE_INACTIVE_Z false // Set 'false' if the nozzle could fall onto your printed part!
#define DISABLE_INACTIVE_I true
#define DISABLE_INACTIVE_J true
#define DISABLE_INACTIVE_K true

4
config/examples/delta/FLSUN/Q5-nano_v1/Configuration.h
View file

@ -1545,8 +1545,8 @@
// @section homing
#define NO_MOTION_BEFORE_HOMING // Inhibit movement until all axes have been homed. Also enable HOME_AFTER_DEACTIVATE for extra safety.
#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated. Also enable NO_MOTION_BEFORE_HOMING for extra safety.
#define NO_MOTION_BEFORE_HOMING // Inhibit movement until all axes have been homed. Also enable HOME_AFTER_DEACTIVATE for extra safety.
#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated. Also enable NO_MOTION_BEFORE_HOMING for extra safety.
/**
* Set Z_IDLE_HEIGHT if the Z-Axis moves on its own when steppers are disabled.

2
config/examples/delta/Geeetech/G2/Configuration_adv.h
View file

@ -1054,7 +1054,7 @@
#define DEFAULT_STEPPER_DEACTIVE_TIME 60
#define DISABLE_INACTIVE_X false
#define DISABLE_INACTIVE_Y false
#define DISABLE_INACTIVE_Z false // Set 'false' if the nozzle could fall onto your printed part!
#define DISABLE_INACTIVE_Z false // Set 'false' if the nozzle could fall onto your printed part!
#define DISABLE_INACTIVE_I true
#define DISABLE_INACTIVE_J true
#define DISABLE_INACTIVE_K true

2
config/examples/delta/Geeetech/G2Pro/Configuration_adv.h
View file

@ -1054,7 +1054,7 @@
#define DEFAULT_STEPPER_DEACTIVE_TIME 60
#define DISABLE_INACTIVE_X false
#define DISABLE_INACTIVE_Y false
#define DISABLE_INACTIVE_Z false // Set 'false' if the nozzle could fall onto your printed part!
#define DISABLE_INACTIVE_Z false // Set 'false' if the nozzle could fall onto your printed part!
#define DISABLE_INACTIVE_I true
#define DISABLE_INACTIVE_J true
#define DISABLE_INACTIVE_K true

2
config/examples/delta/Geeetech/G2S/Configuration_adv.h
View file

@ -1054,7 +1054,7 @@
#define DEFAULT_STEPPER_DEACTIVE_TIME 60
#define DISABLE_INACTIVE_X false
#define DISABLE_INACTIVE_Y false
#define DISABLE_INACTIVE_Z false // Set 'false' if the nozzle could fall onto your printed part!
#define DISABLE_INACTIVE_Z false // Set 'false' if the nozzle could fall onto your printed part!
#define DISABLE_INACTIVE_I true
#define DISABLE_INACTIVE_J true
#define DISABLE_INACTIVE_K true

2
config/examples/delta/Geeetech/G2SPro/Configuration_adv.h
View file

@ -1054,7 +1054,7 @@
#define DEFAULT_STEPPER_DEACTIVE_TIME 60
#define DISABLE_INACTIVE_X false
#define DISABLE_INACTIVE_Y false
#define DISABLE_INACTIVE_Z false // Set 'false' if the nozzle could fall onto your printed part!
#define DISABLE_INACTIVE_Z false // Set 'false' if the nozzle could fall onto your printed part!
#define DISABLE_INACTIVE_I true
#define DISABLE_INACTIVE_J true
#define DISABLE_INACTIVE_K true

2
config/examples/delta/kossel_clear/Configuration_adv.h
View file

@ -1054,7 +1054,7 @@
#define DEFAULT_STEPPER_DEACTIVE_TIME 60
#define DISABLE_INACTIVE_X false
#define DISABLE_INACTIVE_Y false
#define DISABLE_INACTIVE_Z false // Set 'false' if the nozzle could fall onto your printed part!
#define DISABLE_INACTIVE_Z false // Set 'false' if the nozzle could fall onto your printed part!
#define DISABLE_INACTIVE_I true
#define DISABLE_INACTIVE_J true
#define DISABLE_INACTIVE_K true