diff --git a/config/default/Configuration.h b/config/default/Configuration.h index 4689a530de..32fbb8d39c 100644 --- a/config/default/Configuration.h +++ b/config/default/Configuration.h @@ -2128,8 +2128,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/3DFabXYZ/Migbot/Configuration.h b/config/examples/3DFabXYZ/Migbot/Configuration.h index 931b946f8d..e97465e7db 100644 --- a/config/examples/3DFabXYZ/Migbot/Configuration.h +++ b/config/examples/3DFabXYZ/Migbot/Configuration.h @@ -2130,8 +2130,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/ADIMLab/Gantry v1/Configuration.h b/config/examples/ADIMLab/Gantry v1/Configuration.h index 30a366c9a7..6d554f8273 100644 --- a/config/examples/ADIMLab/Gantry v1/Configuration.h +++ b/config/examples/ADIMLab/Gantry v1/Configuration.h @@ -2129,8 +2129,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/ADIMLab/Gantry v2/Configuration.h b/config/examples/ADIMLab/Gantry v2/Configuration.h index 65fea8c1fb..a3d06f3167 100644 --- a/config/examples/ADIMLab/Gantry v2/Configuration.h +++ b/config/examples/ADIMLab/Gantry v2/Configuration.h @@ -2129,8 +2129,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/Alfawise/U20-bltouch/Configuration.h b/config/examples/Alfawise/U20-bltouch/Configuration.h index a3ba93c60b..d7e84e6f9b 100644 --- a/config/examples/Alfawise/U20-bltouch/Configuration.h +++ b/config/examples/Alfawise/U20-bltouch/Configuration.h @@ -2207,8 +2207,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.2 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.2 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/Alfawise/U20/Configuration.h b/config/examples/Alfawise/U20/Configuration.h index d2f44001ba..e76278669f 100644 --- a/config/examples/Alfawise/U20/Configuration.h +++ b/config/examples/Alfawise/U20/Configuration.h @@ -2208,8 +2208,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.2 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.2 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/AliExpress/CL-260/Configuration.h b/config/examples/AliExpress/CL-260/Configuration.h index 95a801dc3f..b3a85a1832 100644 --- a/config/examples/AliExpress/CL-260/Configuration.h +++ b/config/examples/AliExpress/CL-260/Configuration.h @@ -2128,8 +2128,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/AliExpress/UM2pExt/Configuration.h b/config/examples/AliExpress/UM2pExt/Configuration.h index fae80d412b..e09fdc653e 100644 --- a/config/examples/AliExpress/UM2pExt/Configuration.h +++ b/config/examples/AliExpress/UM2pExt/Configuration.h @@ -2129,8 +2129,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/Anet/A2/Configuration.h b/config/examples/Anet/A2/Configuration.h index 0df9ec4980..8fdc4305a7 100644 --- a/config/examples/Anet/A2/Configuration.h +++ b/config/examples/Anet/A2/Configuration.h @@ -2128,8 +2128,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/Anet/A2plus/Configuration.h b/config/examples/Anet/A2plus/Configuration.h index f2cc4c4de8..3354a2ba69 100644 --- a/config/examples/Anet/A2plus/Configuration.h +++ b/config/examples/Anet/A2plus/Configuration.h @@ -2128,8 +2128,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/Anet/A6/Configuration.h b/config/examples/Anet/A6/Configuration.h index d7f7974e03..e813e5b409 100644 --- a/config/examples/Anet/A6/Configuration.h +++ b/config/examples/Anet/A6/Configuration.h @@ -2203,8 +2203,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/Anet/A8/Configuration.h b/config/examples/Anet/A8/Configuration.h index f5514914d0..77455dbdfa 100644 --- a/config/examples/Anet/A8/Configuration.h +++ b/config/examples/Anet/A8/Configuration.h @@ -2131,8 +2131,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/Anet/A8plus/Configuration.h b/config/examples/Anet/A8plus/Configuration.h index d5bcda42a0..109de5a85f 100644 --- a/config/examples/Anet/A8plus/Configuration.h +++ b/config/examples/Anet/A8plus/Configuration.h @@ -2130,8 +2130,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/Anet/A9/Configuration.h b/config/examples/Anet/A9/Configuration.h index 8b55a6927d..6fe236c3a6 100644 --- a/config/examples/Anet/A9/Configuration.h +++ b/config/examples/Anet/A9/Configuration.h @@ -2128,8 +2128,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/Anet/E10/Configuration.h b/config/examples/Anet/E10/Configuration.h index 654aa99385..c7ae729c95 100644 --- a/config/examples/Anet/E10/Configuration.h +++ b/config/examples/Anet/E10/Configuration.h @@ -2128,8 +2128,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 5.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 5.0 // (mm) Z height of nozzle between tramming points #define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/Anet/E16/BTT SKR 1.3/Configuration.h b/config/examples/Anet/E16/BTT SKR 1.3/Configuration.h index 4660dc3486..b48ea337da 100644 --- a/config/examples/Anet/E16/BTT SKR 1.3/Configuration.h +++ b/config/examples/Anet/E16/BTT SKR 1.3/Configuration.h @@ -2130,8 +2130,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/Anet/E16/Stock/Configuration.h b/config/examples/Anet/E16/Stock/Configuration.h index 938932e29a..11e25772aa 100644 --- a/config/examples/Anet/E16/Stock/Configuration.h +++ b/config/examples/Anet/E16/Stock/Configuration.h @@ -2130,8 +2130,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/Anet/ET4+/Configuration.h b/config/examples/Anet/ET4+/Configuration.h index ca9b935736..5ab2325635 100644 --- a/config/examples/Anet/ET4+/Configuration.h +++ b/config/examples/Anet/ET4+/Configuration.h @@ -2134,8 +2134,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.05 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.05 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points #define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/Anet/ET4-Pro/Configuration.h b/config/examples/Anet/ET4-Pro/Configuration.h index 4ea08b47f4..76ef12739b 100644 --- a/config/examples/Anet/ET4-Pro/Configuration.h +++ b/config/examples/Anet/ET4-Pro/Configuration.h @@ -2134,8 +2134,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.05 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.05 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points #define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/Anet/ET4/Configuration.h b/config/examples/Anet/ET4/Configuration.h index a9996c1528..95010c3f42 100644 --- a/config/examples/Anet/ET4/Configuration.h +++ b/config/examples/Anet/ET4/Configuration.h @@ -2134,8 +2134,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.05 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.05 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points #define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/Anet/ET4X/Configuration.h b/config/examples/Anet/ET4X/Configuration.h index ef03e21283..021de0d0ec 100644 --- a/config/examples/Anet/ET4X/Configuration.h +++ b/config/examples/Anet/ET4X/Configuration.h @@ -2134,8 +2134,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.05 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.05 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points #define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/Anet/ET5-Pro/Configuration.h b/config/examples/Anet/ET5-Pro/Configuration.h index bf5caebd49..e00a7d9bab 100644 --- a/config/examples/Anet/ET5-Pro/Configuration.h +++ b/config/examples/Anet/ET5-Pro/Configuration.h @@ -2128,8 +2128,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/Anet/ET5/Configuration.h b/config/examples/Anet/ET5/Configuration.h index 40556f357a..bdf3239e7d 100644 --- a/config/examples/Anet/ET5/Configuration.h +++ b/config/examples/Anet/ET5/Configuration.h @@ -2128,8 +2128,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/Anet/ET5X/Configuration.h b/config/examples/Anet/ET5X/Configuration.h index 3b7d5e50cd..1e422ebf12 100644 --- a/config/examples/Anet/ET5X/Configuration.h +++ b/config/examples/Anet/ET5X/Configuration.h @@ -2128,8 +2128,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/AnyCubic/Chiron/Configuration.h b/config/examples/AnyCubic/Chiron/Configuration.h index d29294fb61..18f4763f7b 100644 --- a/config/examples/AnyCubic/Chiron/Configuration.h +++ b/config/examples/AnyCubic/Chiron/Configuration.h @@ -2131,8 +2131,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/AnyCubic/Mega Zero 2.0/Anycubic V1/Configuration.h b/config/examples/AnyCubic/Mega Zero 2.0/Anycubic V1/Configuration.h index 33ac6a7af1..c4dc36a11b 100644 --- a/config/examples/AnyCubic/Mega Zero 2.0/Anycubic V1/Configuration.h +++ b/config/examples/AnyCubic/Mega Zero 2.0/Anycubic V1/Configuration.h @@ -2129,8 +2129,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/AnyCubic/Mega Zero/Anycubic V1/Configuration.h b/config/examples/AnyCubic/Mega Zero/Anycubic V1/Configuration.h index 0fe4b8aae8..27f7f2312e 100644 --- a/config/examples/AnyCubic/Mega Zero/Anycubic V1/Configuration.h +++ b/config/examples/AnyCubic/Mega Zero/Anycubic V1/Configuration.h @@ -2129,8 +2129,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/AnyCubic/Mega Zero/BigTreeTech SKR Mini MZ V1.0/Configuration.h b/config/examples/AnyCubic/Mega Zero/BigTreeTech SKR Mini MZ V1.0/Configuration.h index 5374fe183d..e568246741 100644 --- a/config/examples/AnyCubic/Mega Zero/BigTreeTech SKR Mini MZ V1.0/Configuration.h +++ b/config/examples/AnyCubic/Mega Zero/BigTreeTech SKR Mini MZ V1.0/Configuration.h @@ -2128,8 +2128,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/AnyCubic/i3 Mega/Trigorilla AVR/Configuration.h b/config/examples/AnyCubic/i3 Mega/Trigorilla AVR/Configuration.h index 8fc5190cb7..2ed01f8be4 100644 --- a/config/examples/AnyCubic/i3 Mega/Trigorilla AVR/Configuration.h +++ b/config/examples/AnyCubic/i3 Mega/Trigorilla AVR/Configuration.h @@ -2188,8 +2188,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/AnyCubic/i3 Mega/Trigorilla Pro STM32/Configuration.h b/config/examples/AnyCubic/i3 Mega/Trigorilla Pro STM32/Configuration.h index ed24de490e..b6700d0bbe 100644 --- a/config/examples/AnyCubic/i3 Mega/Trigorilla Pro STM32/Configuration.h +++ b/config/examples/AnyCubic/i3 Mega/Trigorilla Pro STM32/Configuration.h @@ -2147,8 +2147,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/AnyCubic/i3/Configuration.h b/config/examples/AnyCubic/i3/Configuration.h index f4671f92e3..546ccb9fb2 100644 --- a/config/examples/AnyCubic/i3/Configuration.h +++ b/config/examples/AnyCubic/i3/Configuration.h @@ -2128,8 +2128,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/ArmEd/Configuration.h b/config/examples/ArmEd/Configuration.h index 0db7fa8b7e..6a96ac1478 100644 --- a/config/examples/ArmEd/Configuration.h +++ b/config/examples/ArmEd/Configuration.h @@ -2129,8 +2129,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/Artillery/Genius Pro/Configuration.h b/config/examples/Artillery/Genius Pro/Configuration.h index a30160f984..3429a7e1cc 100644 --- a/config/examples/Artillery/Genius Pro/Configuration.h +++ b/config/examples/Artillery/Genius Pro/Configuration.h @@ -2128,8 +2128,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/Artillery/Genius/BLTouch/Configuration.h b/config/examples/Artillery/Genius/BLTouch/Configuration.h index ec1ef80816..85b7057fe3 100644 --- a/config/examples/Artillery/Genius/BLTouch/Configuration.h +++ b/config/examples/Artillery/Genius/BLTouch/Configuration.h @@ -2128,8 +2128,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/Artillery/Genius/V1/Configuration.h b/config/examples/Artillery/Genius/V1/Configuration.h index 5a5d74a8fb..fdae11d0d1 100644 --- a/config/examples/Artillery/Genius/V1/Configuration.h +++ b/config/examples/Artillery/Genius/V1/Configuration.h @@ -2128,8 +2128,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/Artillery/Hornet/Configuration.h b/config/examples/Artillery/Hornet/Configuration.h index 6626f1c283..a4771c9d13 100644 --- a/config/examples/Artillery/Hornet/Configuration.h +++ b/config/examples/Artillery/Hornet/Configuration.h @@ -2128,8 +2128,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 40, 40, 40, 40 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points #define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/Artillery/Sidewinder X1/0.9 BMG - E3D V6/Configuration.h b/config/examples/Artillery/Sidewinder X1/0.9 BMG - E3D V6/Configuration.h index 8ddf6b7f99..bb0eb6136f 100644 --- a/config/examples/Artillery/Sidewinder X1/0.9 BMG - E3D V6/Configuration.h +++ b/config/examples/Artillery/Sidewinder X1/0.9 BMG - E3D V6/Configuration.h @@ -2144,8 +2144,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/Artillery/Sidewinder X1/V1/Configuration.h b/config/examples/Artillery/Sidewinder X1/V1/Configuration.h index 1c0d7bbae0..10983b9277 100644 --- a/config/examples/Artillery/Sidewinder X1/V1/Configuration.h +++ b/config/examples/Artillery/Sidewinder X1/V1/Configuration.h @@ -2128,8 +2128,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/Artillery/Sidewinder X2/Configuration.h b/config/examples/Artillery/Sidewinder X2/Configuration.h index 790a6aa5a9..73151857d0 100644 --- a/config/examples/Artillery/Sidewinder X2/Configuration.h +++ b/config/examples/Artillery/Sidewinder X2/Configuration.h @@ -2128,8 +2128,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/Azteeg/X5GT/Configuration.h b/config/examples/Azteeg/X5GT/Configuration.h index 7242dd2fee..b4d5975beb 100644 --- a/config/examples/Azteeg/X5GT/Configuration.h +++ b/config/examples/Azteeg/X5GT/Configuration.h @@ -2128,8 +2128,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/BIBO/TouchX/cyclops/Configuration.h b/config/examples/BIBO/TouchX/cyclops/Configuration.h index c1050fe7a5..0d381203e1 100644 --- a/config/examples/BIBO/TouchX/cyclops/Configuration.h +++ b/config/examples/BIBO/TouchX/cyclops/Configuration.h @@ -2128,8 +2128,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/BIBO/TouchX/default/Configuration.h b/config/examples/BIBO/TouchX/default/Configuration.h index eb22eb110f..5fa18cd06e 100644 --- a/config/examples/BIBO/TouchX/default/Configuration.h +++ b/config/examples/BIBO/TouchX/default/Configuration.h @@ -2128,8 +2128,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/BIQU/B1 SE Plus/Configuration.h b/config/examples/BIQU/B1 SE Plus/Configuration.h index 17a282dab0..028d212fc2 100644 --- a/config/examples/BIQU/B1 SE Plus/Configuration.h +++ b/config/examples/BIQU/B1 SE Plus/Configuration.h @@ -2126,8 +2126,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/BIQU/B1 SE/Configuration.h b/config/examples/BIQU/B1 SE/Configuration.h index ab69514778..407db0f59e 100644 --- a/config/examples/BIQU/B1 SE/Configuration.h +++ b/config/examples/BIQU/B1 SE/Configuration.h @@ -2126,8 +2126,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/BIQU/B1/Configuration.h b/config/examples/BIQU/B1/Configuration.h index bec9d91a3c..ff20f2d210 100644 --- a/config/examples/BIQU/B1/Configuration.h +++ b/config/examples/BIQU/B1/Configuration.h @@ -2146,8 +2146,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/BIQU/BX/Configuration.h b/config/examples/BIQU/BX/Configuration.h index 6aa5ff76ad..7f0f7ebfd9 100644 --- a/config/examples/BIQU/BX/Configuration.h +++ b/config/examples/BIQU/BX/Configuration.h @@ -2135,8 +2135,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/BIQU/Hurakan/Configuration.h b/config/examples/BIQU/Hurakan/Configuration.h index 33965c610c..415463e59e 100644 --- a/config/examples/BIQU/Hurakan/Configuration.h +++ b/config/examples/BIQU/Hurakan/Configuration.h @@ -2128,8 +2128,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/BIQU/Thunder Standard/Configuration.h b/config/examples/BIQU/Thunder Standard/Configuration.h index a9b8000f21..0656acdcf3 100644 --- a/config/examples/BIQU/Thunder Standard/Configuration.h +++ b/config/examples/BIQU/Thunder Standard/Configuration.h @@ -2128,8 +2128,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/BQ/Hephestos/Configuration.h b/config/examples/BQ/Hephestos/Configuration.h index 3e9bf87cc5..3839e8ef5f 100644 --- a/config/examples/BQ/Hephestos/Configuration.h +++ b/config/examples/BQ/Hephestos/Configuration.h @@ -2129,8 +2129,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/BQ/Hephestos_2/Configuration.h b/config/examples/BQ/Hephestos_2/Configuration.h index 2005425c8f..fa2e0a2927 100644 --- a/config/examples/BQ/Hephestos_2/Configuration.h +++ b/config/examples/BQ/Hephestos_2/Configuration.h @@ -2142,8 +2142,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/BQ/WITBOX/Configuration.h b/config/examples/BQ/WITBOX/Configuration.h index 7d986345d7..e826d863c4 100644 --- a/config/examples/BQ/WITBOX/Configuration.h +++ b/config/examples/BQ/WITBOX/Configuration.h @@ -2129,8 +2129,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/CTC/A13/Configuration.h b/config/examples/CTC/A13/Configuration.h index 12912850bb..ce5ebacd6e 100644 --- a/config/examples/CTC/A13/Configuration.h +++ b/config/examples/CTC/A13/Configuration.h @@ -2130,8 +2130,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/CTC/Bizer/Configuration.h b/config/examples/CTC/Bizer/Configuration.h index 01799da453..856048fa51 100644 --- a/config/examples/CTC/Bizer/Configuration.h +++ b/config/examples/CTC/Bizer/Configuration.h @@ -2128,8 +2128,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/CTC/i3 2560 Rev A/no probe/Configuration.h b/config/examples/CTC/i3 2560 Rev A/no probe/Configuration.h index 56bf6449d0..a9378351e0 100644 --- a/config/examples/CTC/i3 2560 Rev A/no probe/Configuration.h +++ b/config/examples/CTC/i3 2560 Rev A/no probe/Configuration.h @@ -2129,8 +2129,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/Cartesio/Configuration.h b/config/examples/Cartesio/Configuration.h index a91eb629cd..b0a323afc2 100644 --- a/config/examples/Cartesio/Configuration.h +++ b/config/examples/Cartesio/Configuration.h @@ -2144,8 +2144,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/Copymaster3D/300/Configuration.h b/config/examples/Copymaster3D/300/Configuration.h index 9e141c8ff0..562d813dfc 100644 --- a/config/examples/Copymaster3D/300/Configuration.h +++ b/config/examples/Copymaster3D/300/Configuration.h @@ -2129,8 +2129,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/Copymaster3D/400/Configuration.h b/config/examples/Copymaster3D/400/Configuration.h index a1e1484abc..0738cf2c69 100644 --- a/config/examples/Copymaster3D/400/Configuration.h +++ b/config/examples/Copymaster3D/400/Configuration.h @@ -2128,8 +2128,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/Copymaster3D/500/Configuration.h b/config/examples/Copymaster3D/500/Configuration.h index c744740a52..8b1389d6ef 100644 --- a/config/examples/Copymaster3D/500/Configuration.h +++ b/config/examples/Copymaster3D/500/Configuration.h @@ -2129,8 +2129,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/Creality/CR-10 Mini/BigTreeTech SKR Mini E3 2.0/Configuration.h b/config/examples/Creality/CR-10 Mini/BigTreeTech SKR Mini E3 2.0/Configuration.h index 3c5c24ebd1..62c70d04b0 100644 --- a/config/examples/Creality/CR-10 Mini/BigTreeTech SKR Mini E3 2.0/Configuration.h +++ b/config/examples/Creality/CR-10 Mini/BigTreeTech SKR Mini E3 2.0/Configuration.h @@ -2137,8 +2137,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/Creality/CR-10 Mini/CrealityV1/Configuration.h b/config/examples/Creality/CR-10 Mini/CrealityV1/Configuration.h index 2f68af87d8..dc28d816c9 100644 --- a/config/examples/Creality/CR-10 Mini/CrealityV1/Configuration.h +++ b/config/examples/Creality/CR-10 Mini/CrealityV1/Configuration.h @@ -2137,8 +2137,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/Creality/CR-10 Mini/MEEB-3DP/Configuration.h b/config/examples/Creality/CR-10 Mini/MEEB-3DP/Configuration.h index b35779ce5f..17a06617bc 100644 --- a/config/examples/Creality/CR-10 Mini/MEEB-3DP/Configuration.h +++ b/config/examples/Creality/CR-10 Mini/MEEB-3DP/Configuration.h @@ -2128,8 +2128,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points #define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/Creality/CR-10 S4/CrealityV1/Configuration.h b/config/examples/Creality/CR-10 S4/CrealityV1/Configuration.h index f3a4d1d6c2..e82a212477 100644 --- a/config/examples/Creality/CR-10 S4/CrealityV1/Configuration.h +++ b/config/examples/Creality/CR-10 S4/CrealityV1/Configuration.h @@ -2131,8 +2131,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 1.2 with TFT35 E3 V3.0/Configuration.h b/config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 1.2 with TFT35 E3 V3.0/Configuration.h index a45e375d3d..2b95cd727c 100644 --- a/config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 1.2 with TFT35 E3 V3.0/Configuration.h +++ b/config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 1.2 with TFT35 E3 V3.0/Configuration.h @@ -2131,8 +2131,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 v3/Configuration.h b/config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 v3/Configuration.h index 2345b4f086..40f97dd27c 100644 --- a/config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 v3/Configuration.h +++ b/config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 v3/Configuration.h @@ -2130,8 +2130,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 45, 45, 45, 45 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner #define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/Creality/CR-10 S5/CrealityV1/Configuration.h b/config/examples/Creality/CR-10 S5/CrealityV1/Configuration.h index f772556ac4..9510e1d8cf 100644 --- a/config/examples/Creality/CR-10 S5/CrealityV1/Configuration.h +++ b/config/examples/Creality/CR-10 S5/CrealityV1/Configuration.h @@ -2131,8 +2131,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/Creality/CR-10 S5/CrealityV2.2-BLTouch/Configuration.h b/config/examples/Creality/CR-10 S5/CrealityV2.2-BLTouch/Configuration.h index c2f2801d27..96e34fc04a 100644 --- a/config/examples/Creality/CR-10 S5/CrealityV2.2-BLTouch/Configuration.h +++ b/config/examples/Creality/CR-10 S5/CrealityV2.2-BLTouch/Configuration.h @@ -2132,8 +2132,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/Creality/CR-10 V2/Configuration.h b/config/examples/Creality/CR-10 V2/Configuration.h index 6b44663e4d..9a8f4ec826 100644 --- a/config/examples/Creality/CR-10 V2/Configuration.h +++ b/config/examples/Creality/CR-10 V2/Configuration.h @@ -2155,8 +2155,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/Creality/CR-10 V3/Configuration.h b/config/examples/Creality/CR-10 V3/Configuration.h index 7301644fd3..af5ee60951 100644 --- a/config/examples/Creality/CR-10 V3/Configuration.h +++ b/config/examples/Creality/CR-10 V3/Configuration.h @@ -2158,8 +2158,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 45, 45, 45, 45 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points #define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner #if ENABLED(CR10V3_BLTOUCH) #define BED_TRAMMING_USE_PROBE diff --git a/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 2.0/Configuration.h b/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 2.0/Configuration.h index e28ebaed21..0ea9491550 100644 --- a/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 2.0/Configuration.h +++ b/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 2.0/Configuration.h @@ -2127,8 +2127,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/Creality/CR-10/CrealityV1/Configuration.h b/config/examples/Creality/CR-10/CrealityV1/Configuration.h index 49f8d399f1..5043d05d88 100644 --- a/config/examples/Creality/CR-10/CrealityV1/Configuration.h +++ b/config/examples/Creality/CR-10/CrealityV1/Configuration.h @@ -2128,8 +2128,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/Creality/CR-10S/BigTreeTech SKR 1.4 Turbo TMC2209/Configuration.h b/config/examples/Creality/CR-10S/BigTreeTech SKR 1.4 Turbo TMC2209/Configuration.h index c7ecba2ce3..e6e9bfd812 100644 --- a/config/examples/Creality/CR-10S/BigTreeTech SKR 1.4 Turbo TMC2209/Configuration.h +++ b/config/examples/Creality/CR-10S/BigTreeTech SKR 1.4 Turbo TMC2209/Configuration.h @@ -2128,8 +2128,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/Creality/CR-10S/BigTreeTech SKR 2.0 TMC2209/Configuration.h b/config/examples/Creality/CR-10S/BigTreeTech SKR 2.0 TMC2209/Configuration.h index 1c78b90675..3aaa07760c 100644 --- a/config/examples/Creality/CR-10S/BigTreeTech SKR 2.0 TMC2209/Configuration.h +++ b/config/examples/Creality/CR-10S/BigTreeTech SKR 2.0 TMC2209/Configuration.h @@ -2128,8 +2128,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/Creality/CR-10S/BigTreeTech SKR Mini E3 2.0/Configuration.h b/config/examples/Creality/CR-10S/BigTreeTech SKR Mini E3 2.0/Configuration.h index 60617a06ff..24688ff2eb 100644 --- a/config/examples/Creality/CR-10S/BigTreeTech SKR Mini E3 2.0/Configuration.h +++ b/config/examples/Creality/CR-10S/BigTreeTech SKR Mini E3 2.0/Configuration.h @@ -2129,8 +2129,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/Creality/CR-10S/BigTreeTech SKR Pro v1.2/Configuration.h b/config/examples/Creality/CR-10S/BigTreeTech SKR Pro v1.2/Configuration.h index 8dbef481d2..707ea9db15 100644 --- a/config/examples/Creality/CR-10S/BigTreeTech SKR Pro v1.2/Configuration.h +++ b/config/examples/Creality/CR-10S/BigTreeTech SKR Pro v1.2/Configuration.h @@ -2128,8 +2128,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/Creality/CR-10S/CrealityV1/Configuration.h b/config/examples/Creality/CR-10S/CrealityV1/Configuration.h index 1c6c237c99..611b9e9872 100644 --- a/config/examples/Creality/CR-10S/CrealityV1/Configuration.h +++ b/config/examples/Creality/CR-10S/CrealityV1/Configuration.h @@ -2129,8 +2129,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/Creality/CR-20 Pro/Configuration.h b/config/examples/Creality/CR-20 Pro/Configuration.h index f5fd2279d6..b6ee666eee 100644 --- a/config/examples/Creality/CR-20 Pro/Configuration.h +++ b/config/examples/Creality/CR-20 Pro/Configuration.h @@ -2131,8 +2131,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/Creality/CR-20/RepRapWorld Minitronics20/Configuration.h b/config/examples/Creality/CR-20/RepRapWorld Minitronics20/Configuration.h index 24e556c117..71437ab16f 100644 --- a/config/examples/Creality/CR-20/RepRapWorld Minitronics20/Configuration.h +++ b/config/examples/Creality/CR-20/RepRapWorld Minitronics20/Configuration.h @@ -2129,8 +2129,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/Creality/CR-20/Stock/Configuration.h b/config/examples/Creality/CR-20/Stock/Configuration.h index ae68049e9e..bfb1c2ce43 100644 --- a/config/examples/Creality/CR-20/Stock/Configuration.h +++ b/config/examples/Creality/CR-20/Stock/Configuration.h @@ -2131,8 +2131,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/Creality/CR-30 PrintMill/Configuration.h b/config/examples/Creality/CR-30 PrintMill/Configuration.h index 1dd4838017..baaac4623b 100644 --- a/config/examples/Creality/CR-30 PrintMill/Configuration.h +++ b/config/examples/Creality/CR-30 PrintMill/Configuration.h @@ -2128,8 +2128,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/Creality/CR-6 SE/Configuration.h b/config/examples/Creality/CR-6 SE/Configuration.h index b1bea79b30..747162cd38 100644 --- a/config/examples/Creality/CR-6 SE/Configuration.h +++ b/config/examples/Creality/CR-6 SE/Configuration.h @@ -2128,8 +2128,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/Creality/CR-8/Configuration.h b/config/examples/Creality/CR-8/Configuration.h index 4306b17f50..4c337d414e 100644 --- a/config/examples/Creality/CR-8/Configuration.h +++ b/config/examples/Creality/CR-8/Configuration.h @@ -2126,8 +2126,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/Creality/Ender-2 Pro/CrealityV423/Configuration.h b/config/examples/Creality/Ender-2 Pro/CrealityV423/Configuration.h index ef7b7d21ff..fb4eb6d2bf 100644 --- a/config/examples/Creality/Ender-2 Pro/CrealityV423/Configuration.h +++ b/config/examples/Creality/Ender-2 Pro/CrealityV423/Configuration.h @@ -2128,8 +2128,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/Creality/Ender-2/Configuration.h b/config/examples/Creality/Ender-2/Configuration.h index 2d903f1ba3..f65398448a 100644 --- a/config/examples/Creality/Ender-2/Configuration.h +++ b/config/examples/Creality/Ender-2/Configuration.h @@ -2129,8 +2129,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/Creality/Ender-3 Max/Configuration.h b/config/examples/Creality/Ender-3 Max/Configuration.h index 605dc149d2..c47cdca30a 100644 --- a/config/examples/Creality/Ender-3 Max/Configuration.h +++ b/config/examples/Creality/Ender-3 Max/Configuration.h @@ -2133,8 +2133,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/Creality/Ender-3 Neo/Configuration.h b/config/examples/Creality/Ender-3 Neo/Configuration.h index 64525bd278..48722c8b9c 100644 --- a/config/examples/Creality/Ender-3 Neo/Configuration.h +++ b/config/examples/Creality/Ender-3 Neo/Configuration.h @@ -2129,8 +2129,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR 1.4 Turbo/Configuration.h b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR 1.4 Turbo/Configuration.h index 55a75f67e0..b7de9fedc0 100644 --- a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR 1.4 Turbo/Configuration.h +++ b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR 1.4 Turbo/Configuration.h @@ -2128,8 +2128,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.0/Configuration.h b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.0/Configuration.h index 903f1e5d39..ee3b3422d8 100644 --- a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.0/Configuration.h +++ b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.0/Configuration.h @@ -2128,8 +2128,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.2/Configuration.h b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.2/Configuration.h index f759727b2c..46ed70540d 100644 --- a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.2/Configuration.h +++ b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.2/Configuration.h @@ -2128,8 +2128,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 2.0/Configuration.h b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 2.0/Configuration.h index 007121b904..d1dd3835cb 100644 --- a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 2.0/Configuration.h +++ b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 2.0/Configuration.h @@ -2128,8 +2128,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 3.0/Configuration.h b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 3.0/Configuration.h index 28beeb6b3e..be4273d2a5 100644 --- a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 3.0/Configuration.h +++ b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 3.0/Configuration.h @@ -2128,8 +2128,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/Creality/Ender-3 Pro/CrealityV1/Configuration.h b/config/examples/Creality/Ender-3 Pro/CrealityV1/Configuration.h index 15dc9105a9..4266f2ba43 100644 --- a/config/examples/Creality/Ender-3 Pro/CrealityV1/Configuration.h +++ b/config/examples/Creality/Ender-3 Pro/CrealityV1/Configuration.h @@ -2129,8 +2129,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/Creality/Ender-3 Pro/CrealityV422/Configuration.h b/config/examples/Creality/Ender-3 Pro/CrealityV422/Configuration.h index 2692faa81c..c065b8e04d 100644 --- a/config/examples/Creality/Ender-3 Pro/CrealityV422/Configuration.h +++ b/config/examples/Creality/Ender-3 Pro/CrealityV422/Configuration.h @@ -2128,8 +2128,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/Creality/Ender-3 Pro/CrealityV427/Configuration.h b/config/examples/Creality/Ender-3 Pro/CrealityV427/Configuration.h index dc33d0d0fb..fa2c760540 100644 --- a/config/examples/Creality/Ender-3 Pro/CrealityV427/Configuration.h +++ b/config/examples/Creality/Ender-3 Pro/CrealityV427/Configuration.h @@ -2129,8 +2129,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/Creality/Ender-3 S1/STM32F1/Configuration.h b/config/examples/Creality/Ender-3 S1/STM32F1/Configuration.h index 550c632de6..6de3526310 100644 --- a/config/examples/Creality/Ender-3 S1/STM32F1/Configuration.h +++ b/config/examples/Creality/Ender-3 S1/STM32F1/Configuration.h @@ -2128,8 +2128,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/Creality/Ender-3 S1/STM32F4/Configuration.h b/config/examples/Creality/Ender-3 S1/STM32F4/Configuration.h index a751c1ece5..0c3b8a2fd6 100644 --- a/config/examples/Creality/Ender-3 S1/STM32F4/Configuration.h +++ b/config/examples/Creality/Ender-3 S1/STM32F4/Configuration.h @@ -2128,8 +2128,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/Creality/Ender-3 V2 Neo/Configuration.h b/config/examples/Creality/Ender-3 V2 Neo/Configuration.h index 8d6b056278..5c57d2bbe9 100644 --- a/config/examples/Creality/Ender-3 V2 Neo/Configuration.h +++ b/config/examples/Creality/Ender-3 V2 Neo/Configuration.h @@ -2129,8 +2129,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/CrealityUI/Configuration.h b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/CrealityUI/Configuration.h index 7db85184b2..ef080bc2ed 100644 --- a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/CrealityUI/Configuration.h +++ b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/CrealityUI/Configuration.h @@ -2128,8 +2128,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/MarlinUI/Configuration.h b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/MarlinUI/Configuration.h index b3ee4e387c..ea95b6849a 100644 --- a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/MarlinUI/Configuration.h +++ b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/MarlinUI/Configuration.h @@ -2128,8 +2128,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 v3/CrealityUI/Configuration.h b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 v3/CrealityUI/Configuration.h index b35397a072..0aacdcd032 100644 --- a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 v3/CrealityUI/Configuration.h +++ b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 v3/CrealityUI/Configuration.h @@ -2128,8 +2128,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 v3/MarlinUI/Configuration.h b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 v3/MarlinUI/Configuration.h index 3a60fbff5e..c72d4cb890 100644 --- a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 v3/MarlinUI/Configuration.h +++ b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 v3/MarlinUI/Configuration.h @@ -2128,8 +2128,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/Creality/Ender-3 V2/CrealityV422/CrealityUI/Configuration.h b/config/examples/Creality/Ender-3 V2/CrealityV422/CrealityUI/Configuration.h index 0cb7bac81c..4c218399d0 100644 --- a/config/examples/Creality/Ender-3 V2/CrealityV422/CrealityUI/Configuration.h +++ b/config/examples/Creality/Ender-3 V2/CrealityV422/CrealityUI/Configuration.h @@ -2128,8 +2128,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/Creality/Ender-3 V2/CrealityV422/MarlinUI/Configuration.h b/config/examples/Creality/Ender-3 V2/CrealityV422/MarlinUI/Configuration.h index 012ff48348..af05f62ad2 100644 --- a/config/examples/Creality/Ender-3 V2/CrealityV422/MarlinUI/Configuration.h +++ b/config/examples/Creality/Ender-3 V2/CrealityV422/MarlinUI/Configuration.h @@ -2128,8 +2128,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/Creality/Ender-3/BigTreeTech E3 RRF/Configuration.h b/config/examples/Creality/Ender-3/BigTreeTech E3 RRF/Configuration.h index 7ffc832976..0f10aa81b0 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech E3 RRF/Configuration.h +++ b/config/examples/Creality/Ender-3/BigTreeTech E3 RRF/Configuration.h @@ -2127,8 +2127,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR 1.4/Configuration.h b/config/examples/Creality/Ender-3/BigTreeTech SKR 1.4/Configuration.h index 8a17fbc578..5030fee648 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR 1.4/Configuration.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR 1.4/Configuration.h @@ -2129,8 +2129,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/2-into-1 Hotend/Configuration.h b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/2-into-1 Hotend/Configuration.h index 58b2389abc..23283247ec 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/2-into-1 Hotend/Configuration.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/2-into-1 Hotend/Configuration.h @@ -2127,8 +2127,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Dual Z/Configuration.h b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Dual Z/Configuration.h index 2cbea75c32..7512b00a20 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Dual Z/Configuration.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Dual Z/Configuration.h @@ -2127,8 +2127,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Single Extruder/Configuration.h b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Single Extruder/Configuration.h index c0cf4070ea..c902a98c8e 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Single Extruder/Configuration.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Single Extruder/Configuration.h @@ -2127,8 +2127,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR E3-DIP V1.1/Configuration.h b/config/examples/Creality/Ender-3/BigTreeTech SKR E3-DIP V1.1/Configuration.h index dba0c88850..c5caa04158 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR E3-DIP V1.1/Configuration.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR E3-DIP V1.1/Configuration.h @@ -2128,8 +2128,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.0/Configuration.h b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.0/Configuration.h index 71ea18e695..491ddd870f 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.0/Configuration.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.0/Configuration.h @@ -2127,8 +2127,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.2/Configuration.h b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.2/Configuration.h index 4de69d5b91..60cc283d06 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.2/Configuration.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.2/Configuration.h @@ -2127,8 +2127,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 2.0/Configuration.h b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 2.0/Configuration.h index 06c0fee816..b1af4835ca 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 2.0/Configuration.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 2.0/Configuration.h @@ -2127,8 +2127,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 3.0/Configuration.h b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 3.0/Configuration.h index f5c6d8a126..496beb7b80 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 3.0/Configuration.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 3.0/Configuration.h @@ -2128,8 +2128,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/Creality/Ender-3/CrealityV1/Configuration.h b/config/examples/Creality/Ender-3/CrealityV1/Configuration.h index 85a02de23b..8a716e937b 100644 --- a/config/examples/Creality/Ender-3/CrealityV1/Configuration.h +++ b/config/examples/Creality/Ender-3/CrealityV1/Configuration.h @@ -2129,8 +2129,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/Creality/Ender-3/CrealityV422/Configuration.h b/config/examples/Creality/Ender-3/CrealityV422/Configuration.h index 37ecea9ada..af932a9610 100644 --- a/config/examples/Creality/Ender-3/CrealityV422/Configuration.h +++ b/config/examples/Creality/Ender-3/CrealityV422/Configuration.h @@ -2135,8 +2135,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/Creality/Ender-3/CrealityV427/Configuration.h b/config/examples/Creality/Ender-3/CrealityV427/Configuration.h index 0b27c94453..b9be736b29 100644 --- a/config/examples/Creality/Ender-3/CrealityV427/Configuration.h +++ b/config/examples/Creality/Ender-3/CrealityV427/Configuration.h @@ -2129,8 +2129,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/BLTouch/Configuration.h b/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/BLTouch/Configuration.h index 8baf569288..5801cdbf03 100644 --- a/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/BLTouch/Configuration.h +++ b/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/BLTouch/Configuration.h @@ -2129,8 +2129,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/base/Configuration.h b/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/base/Configuration.h index 9b5569f434..0f73415baf 100644 --- a/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/base/Configuration.h +++ b/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/base/Configuration.h @@ -2129,8 +2129,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/Creality/Ender-3/FYSETC Cheetah 2.0/Configuration.h b/config/examples/Creality/Ender-3/FYSETC Cheetah 2.0/Configuration.h index 4b090deecb..e1d1e5a14e 100644 --- a/config/examples/Creality/Ender-3/FYSETC Cheetah 2.0/Configuration.h +++ b/config/examples/Creality/Ender-3/FYSETC Cheetah 2.0/Configuration.h @@ -2129,8 +2129,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/Creality/Ender-3/FYSETC Cheetah/BLTouch/Configuration.h b/config/examples/Creality/Ender-3/FYSETC Cheetah/BLTouch/Configuration.h index 2a1646bdc5..faa323bb7a 100644 --- a/config/examples/Creality/Ender-3/FYSETC Cheetah/BLTouch/Configuration.h +++ b/config/examples/Creality/Ender-3/FYSETC Cheetah/BLTouch/Configuration.h @@ -2129,8 +2129,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/Creality/Ender-3/FYSETC Cheetah/base/Configuration.h b/config/examples/Creality/Ender-3/FYSETC Cheetah/base/Configuration.h index 48cf6062ca..df8eb72cbf 100644 --- a/config/examples/Creality/Ender-3/FYSETC Cheetah/base/Configuration.h +++ b/config/examples/Creality/Ender-3/FYSETC Cheetah/base/Configuration.h @@ -2129,8 +2129,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/Creality/Ender-3/MEEB-3DP/Configuration.h b/config/examples/Creality/Ender-3/MEEB-3DP/Configuration.h index c4d3340ad5..8b665a328b 100644 --- a/config/examples/Creality/Ender-3/MEEB-3DP/Configuration.h +++ b/config/examples/Creality/Ender-3/MEEB-3DP/Configuration.h @@ -2134,8 +2134,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points #define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/Creality/Ender-3/MKS Robin E3/V1.0/Configuration.h b/config/examples/Creality/Ender-3/MKS Robin E3/V1.0/Configuration.h index e05edd2af6..3e6d02a5b8 100644 --- a/config/examples/Creality/Ender-3/MKS Robin E3/V1.0/Configuration.h +++ b/config/examples/Creality/Ender-3/MKS Robin E3/V1.0/Configuration.h @@ -2127,8 +2127,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points #define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/Creality/Ender-3/MKS Robin E3/V1.1/Configuration.h b/config/examples/Creality/Ender-3/MKS Robin E3/V1.1/Configuration.h index 15424bcb9d..7ef3ba5328 100644 --- a/config/examples/Creality/Ender-3/MKS Robin E3/V1.1/Configuration.h +++ b/config/examples/Creality/Ender-3/MKS Robin E3/V1.1/Configuration.h @@ -2127,8 +2127,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points #define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/Creality/Ender-3/MKS Robin E3P/Configuration.h b/config/examples/Creality/Ender-3/MKS Robin E3P/Configuration.h index 365b08cfc2..e8751fa79a 100644 --- a/config/examples/Creality/Ender-3/MKS Robin E3P/Configuration.h +++ b/config/examples/Creality/Ender-3/MKS Robin E3P/Configuration.h @@ -2129,8 +2129,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points #define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/Creality/Ender-3/TH3D EZBoard Lite V2/Configuration.h b/config/examples/Creality/Ender-3/TH3D EZBoard Lite V2/Configuration.h index 824225c92d..97340984c5 100644 --- a/config/examples/Creality/Ender-3/TH3D EZBoard Lite V2/Configuration.h +++ b/config/examples/Creality/Ender-3/TH3D EZBoard Lite V2/Configuration.h @@ -2129,8 +2129,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/Creality/Ender-4/Configuration.h b/config/examples/Creality/Ender-4/Configuration.h index e010785c29..91a3325ce7 100644 --- a/config/examples/Creality/Ender-4/Configuration.h +++ b/config/examples/Creality/Ender-4/Configuration.h @@ -2128,8 +2128,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/Creality/Ender-5 Plus/BigTreeTech SKR 3/Configuration.h b/config/examples/Creality/Ender-5 Plus/BigTreeTech SKR 3/Configuration.h index d4cadad9a8..f861c498f4 100644 --- a/config/examples/Creality/Ender-5 Plus/BigTreeTech SKR 3/Configuration.h +++ b/config/examples/Creality/Ender-5 Plus/BigTreeTech SKR 3/Configuration.h @@ -2128,8 +2128,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/Creality/Ender-5 Plus/CrealityV1/Configuration.h b/config/examples/Creality/Ender-5 Plus/CrealityV1/Configuration.h index 4ec47ceeac..2b12147340 100644 --- a/config/examples/Creality/Ender-5 Plus/CrealityV1/Configuration.h +++ b/config/examples/Creality/Ender-5 Plus/CrealityV1/Configuration.h @@ -2138,8 +2138,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR E3 Turbo/Configuration.h b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR E3 Turbo/Configuration.h index 04de76cdda..4b60993339 100644 --- a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR E3 Turbo/Configuration.h +++ b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR E3 Turbo/Configuration.h @@ -2138,8 +2138,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 1.2/Configuration.h b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 1.2/Configuration.h index 36edec29d6..91df75eb2b 100644 --- a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 1.2/Configuration.h +++ b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 1.2/Configuration.h @@ -2127,8 +2127,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points #define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 2.0 with BLTouch/Configuration.h b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 2.0 with BLTouch/Configuration.h index 54423d61f2..78b8732526 100644 --- a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 2.0 with BLTouch/Configuration.h +++ b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 2.0 with BLTouch/Configuration.h @@ -2129,8 +2129,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/Creality/Ender-5 Pro/CrealityV1/Configuration.h b/config/examples/Creality/Ender-5 Pro/CrealityV1/Configuration.h index 1354cbc41e..db7d08a57c 100644 --- a/config/examples/Creality/Ender-5 Pro/CrealityV1/Configuration.h +++ b/config/examples/Creality/Ender-5 Pro/CrealityV1/Configuration.h @@ -2129,8 +2129,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/Creality/Ender-5 Pro/CrealityV422/Configuration.h b/config/examples/Creality/Ender-5 Pro/CrealityV422/Configuration.h index 2643b66a50..bbbbb968a2 100644 --- a/config/examples/Creality/Ender-5 Pro/CrealityV422/Configuration.h +++ b/config/examples/Creality/Ender-5 Pro/CrealityV422/Configuration.h @@ -2148,8 +2148,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/Creality/Ender-5 Pro/CrealityV427/Configuration.h b/config/examples/Creality/Ender-5 Pro/CrealityV427/Configuration.h index 8e9a8f1b9f..59ea1f1f8a 100644 --- a/config/examples/Creality/Ender-5 Pro/CrealityV427/Configuration.h +++ b/config/examples/Creality/Ender-5 Pro/CrealityV427/Configuration.h @@ -2129,8 +2129,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/Creality/Ender-5 S1/Configuration.h b/config/examples/Creality/Ender-5 S1/Configuration.h index 4b33396668..f45b04feed 100644 --- a/config/examples/Creality/Ender-5 S1/Configuration.h +++ b/config/examples/Creality/Ender-5 S1/Configuration.h @@ -2183,8 +2183,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo with BLTouch/Configuration.h b/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo with BLTouch/Configuration.h index 96f7158e53..a20783dcff 100644 --- a/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo with BLTouch/Configuration.h +++ b/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo with BLTouch/Configuration.h @@ -2129,8 +2129,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo/Configuration.h b/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo/Configuration.h index ca0a65e5f4..59162f55ea 100644 --- a/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo/Configuration.h +++ b/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo/Configuration.h @@ -2129,8 +2129,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 1.2/Configuration.h b/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 1.2/Configuration.h index 7ef53134ea..86a7111be5 100644 --- a/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 1.2/Configuration.h +++ b/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 1.2/Configuration.h @@ -2127,8 +2127,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 2.0/Configuration.h b/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 2.0/Configuration.h index 88ef79d953..b37ef90c49 100644 --- a/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 2.0/Configuration.h +++ b/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 2.0/Configuration.h @@ -2127,8 +2127,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/Creality/Ender-5/CrealityV1/Configuration.h b/config/examples/Creality/Ender-5/CrealityV1/Configuration.h index 7152da9d4c..c4f699c4cd 100644 --- a/config/examples/Creality/Ender-5/CrealityV1/Configuration.h +++ b/config/examples/Creality/Ender-5/CrealityV1/Configuration.h @@ -2129,8 +2129,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/Creality/Ender-5/CrealityV427/Configuration.h b/config/examples/Creality/Ender-5/CrealityV427/Configuration.h index 2af429c76c..e697557327 100644 --- a/config/examples/Creality/Ender-5/CrealityV427/Configuration.h +++ b/config/examples/Creality/Ender-5/CrealityV427/Configuration.h @@ -2129,8 +2129,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/Creality/Ender-6/Configuration.h b/config/examples/Creality/Ender-6/Configuration.h index d6550412d2..3420bae404 100644 --- a/config/examples/Creality/Ender-6/Configuration.h +++ b/config/examples/Creality/Ender-6/Configuration.h @@ -2137,8 +2137,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/Dagoma/Disco Ultimate/Configuration.h b/config/examples/Dagoma/Disco Ultimate/Configuration.h index 7cca0c6adf..69580490a2 100644 --- a/config/examples/Dagoma/Disco Ultimate/Configuration.h +++ b/config/examples/Dagoma/Disco Ultimate/Configuration.h @@ -2128,8 +2128,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/Daycom/3DP-100/Configuration.h b/config/examples/Daycom/3DP-100/Configuration.h index 703483b091..e028948493 100644 --- a/config/examples/Daycom/3DP-100/Configuration.h +++ b/config/examples/Daycom/3DP-100/Configuration.h @@ -2132,8 +2132,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/EXP3D/Imprimante multifonction/Configuration.h b/config/examples/EXP3D/Imprimante multifonction/Configuration.h index 44528d02b2..52c8e5c671 100644 --- a/config/examples/EXP3D/Imprimante multifonction/Configuration.h +++ b/config/examples/EXP3D/Imprimante multifonction/Configuration.h @@ -2128,8 +2128,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points #define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/EasyThreeD/ET4000PLUS/Configuration.h b/config/examples/EasyThreeD/ET4000PLUS/Configuration.h index efed94270a..1449589812 100644 --- a/config/examples/EasyThreeD/ET4000PLUS/Configuration.h +++ b/config/examples/EasyThreeD/ET4000PLUS/Configuration.h @@ -2128,8 +2128,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/Einstart-S/Configuration.h b/config/examples/Einstart-S/Configuration.h index aeb3e23c45..62e9a10b95 100644 --- a/config/examples/Einstart-S/Configuration.h +++ b/config/examples/Einstart-S/Configuration.h @@ -2133,8 +2133,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/Elegoo/Neptune 2/Configuration.h b/config/examples/Elegoo/Neptune 2/Configuration.h index 47f04a0260..821aa9c88e 100644 --- a/config/examples/Elegoo/Neptune 2/Configuration.h +++ b/config/examples/Elegoo/Neptune 2/Configuration.h @@ -2196,8 +2196,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 33, 33, 33, 33 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.2 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 2 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.2 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 2 // (mm) Z height of nozzle between tramming points #define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/Eryone/Thinker SE/Configuration.h b/config/examples/Eryone/Thinker SE/Configuration.h index 3792e6132b..3802178dce 100644 --- a/config/examples/Eryone/Thinker SE/Configuration.h +++ b/config/examples/Eryone/Thinker SE/Configuration.h @@ -2168,8 +2168,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/Eryone/Thinker V2/Configuration.h b/config/examples/Eryone/Thinker V2/Configuration.h index 051b43eeda..4c03bfb1c9 100644 --- a/config/examples/Eryone/Thinker V2/Configuration.h +++ b/config/examples/Eryone/Thinker V2/Configuration.h @@ -2168,8 +2168,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/FYSETC/AIO_II/Configuration.h b/config/examples/FYSETC/AIO_II/Configuration.h index 782e9decc6..602d5e8193 100644 --- a/config/examples/FYSETC/AIO_II/Configuration.h +++ b/config/examples/FYSETC/AIO_II/Configuration.h @@ -2129,8 +2129,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/FYSETC/F6_13/Configuration.h b/config/examples/FYSETC/F6_13/Configuration.h index 77d808ab15..16c3ad4cfe 100644 --- a/config/examples/FYSETC/F6_13/Configuration.h +++ b/config/examples/FYSETC/F6_13/Configuration.h @@ -2130,8 +2130,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/FYSETC/S6/Configuration.h b/config/examples/FYSETC/S6/Configuration.h index a95b199af0..f1d20f86de 100644 --- a/config/examples/FYSETC/S6/Configuration.h +++ b/config/examples/FYSETC/S6/Configuration.h @@ -2128,8 +2128,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/Felix/DUAL/Configuration.h b/config/examples/Felix/DUAL/Configuration.h index 71f6700cd8..ec6bd26663 100644 --- a/config/examples/Felix/DUAL/Configuration.h +++ b/config/examples/Felix/DUAL/Configuration.h @@ -2129,8 +2129,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/Felix/Single/Configuration.h b/config/examples/Felix/Single/Configuration.h index 9f94102c05..b95572579a 100644 --- a/config/examples/Felix/Single/Configuration.h +++ b/config/examples/Felix/Single/Configuration.h @@ -2129,8 +2129,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/FlashForge/Creator 2X/Configuration.h b/config/examples/FlashForge/Creator 2X/Configuration.h index 439df6664d..677bb6adda 100644 --- a/config/examples/FlashForge/Creator 2X/Configuration.h +++ b/config/examples/FlashForge/Creator 2X/Configuration.h @@ -2128,8 +2128,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/FlashForge/CreatorPro/Configuration.h b/config/examples/FlashForge/CreatorPro/Configuration.h index 1d597eb10d..c53fdf0402 100644 --- a/config/examples/FlashForge/CreatorPro/Configuration.h +++ b/config/examples/FlashForge/CreatorPro/Configuration.h @@ -2128,8 +2128,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/FlyingBear/P902/Configuration.h b/config/examples/FlyingBear/P902/Configuration.h index 8d0cb4ca71..93b7909b61 100644 --- a/config/examples/FlyingBear/P902/Configuration.h +++ b/config/examples/FlyingBear/P902/Configuration.h @@ -2128,8 +2128,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/FlyingBear/P905H/Configuration.h b/config/examples/FlyingBear/P905H/Configuration.h index 8f06f93b67..f68c906869 100644 --- a/config/examples/FlyingBear/P905H/Configuration.h +++ b/config/examples/FlyingBear/P905H/Configuration.h @@ -2133,8 +2133,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/FoamCutter/generic/Configuration.h b/config/examples/FoamCutter/generic/Configuration.h index f1d53f9158..47bda66b95 100644 --- a/config/examples/FoamCutter/generic/Configuration.h +++ b/config/examples/FoamCutter/generic/Configuration.h @@ -2128,8 +2128,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/FoamCutter/rcKeith/Configuration.h b/config/examples/FoamCutter/rcKeith/Configuration.h index e77e41098c..26085089e1 100644 --- a/config/examples/FoamCutter/rcKeith/Configuration.h +++ b/config/examples/FoamCutter/rcKeith/Configuration.h @@ -2128,8 +2128,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/FolgerTech/FT-5 R2/Configuration.h b/config/examples/FolgerTech/FT-5 R2/Configuration.h index 7a7d544c26..f4a68f8c9e 100644 --- a/config/examples/FolgerTech/FT-5 R2/Configuration.h +++ b/config/examples/FolgerTech/FT-5 R2/Configuration.h @@ -2128,8 +2128,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/FolgerTech/i3-2020/Configuration.h b/config/examples/FolgerTech/i3-2020/Configuration.h index 12660b6ad1..934b66dd67 100644 --- a/config/examples/FolgerTech/i3-2020/Configuration.h +++ b/config/examples/FolgerTech/i3-2020/Configuration.h @@ -2130,8 +2130,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/Formbot/Raptor/Configuration.h b/config/examples/Formbot/Raptor/Configuration.h index 33d31ecdf6..45af312094 100644 --- a/config/examples/Formbot/Raptor/Configuration.h +++ b/config/examples/Formbot/Raptor/Configuration.h @@ -2239,8 +2239,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/Formbot/T_Rex_2+/Configuration.h b/config/examples/Formbot/T_Rex_2+/Configuration.h index 46b79ff9f2..b547d07899 100644 --- a/config/examples/Formbot/T_Rex_2+/Configuration.h +++ b/config/examples/Formbot/T_Rex_2+/Configuration.h @@ -2128,8 +2128,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/Formbot/T_Rex_3/Configuration.h b/config/examples/Formbot/T_Rex_3/Configuration.h index df08057730..4c47549942 100644 --- a/config/examples/Formbot/T_Rex_3/Configuration.h +++ b/config/examples/Formbot/T_Rex_3/Configuration.h @@ -2141,8 +2141,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/Geeetech/A10/Configuration.h b/config/examples/Geeetech/A10/Configuration.h index 447e7b866b..21cac79c1d 100644 --- a/config/examples/Geeetech/A10/Configuration.h +++ b/config/examples/Geeetech/A10/Configuration.h @@ -2128,8 +2128,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/Geeetech/A10D/Configuration.h b/config/examples/Geeetech/A10D/Configuration.h index 224f446411..a5ad9ade97 100644 --- a/config/examples/Geeetech/A10D/Configuration.h +++ b/config/examples/Geeetech/A10D/Configuration.h @@ -2129,8 +2129,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points #define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/Geeetech/A10M/Stock LCD/Configuration.h b/config/examples/Geeetech/A10M/Stock LCD/Configuration.h index b71a604a66..ae509dc8c9 100644 --- a/config/examples/Geeetech/A10M/Stock LCD/Configuration.h +++ b/config/examples/Geeetech/A10M/Stock LCD/Configuration.h @@ -2130,8 +2130,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/Geeetech/A10M/YHCB2004_V4.1/Configuration.h b/config/examples/Geeetech/A10M/YHCB2004_V4.1/Configuration.h index e099911065..08789c8ae6 100644 --- a/config/examples/Geeetech/A10M/YHCB2004_V4.1/Configuration.h +++ b/config/examples/Geeetech/A10M/YHCB2004_V4.1/Configuration.h @@ -2130,8 +2130,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/Geeetech/A10PRO/Configuration.h b/config/examples/Geeetech/A10PRO/Configuration.h index 72680f1de8..a8059254b2 100644 --- a/config/examples/Geeetech/A10PRO/Configuration.h +++ b/config/examples/Geeetech/A10PRO/Configuration.h @@ -2128,8 +2128,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/Geeetech/A10T/Stock LCD/Configuration.h b/config/examples/Geeetech/A10T/Stock LCD/Configuration.h index e79b6f9aab..10f8fe2f93 100644 --- a/config/examples/Geeetech/A10T/Stock LCD/Configuration.h +++ b/config/examples/Geeetech/A10T/Stock LCD/Configuration.h @@ -2131,8 +2131,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/Geeetech/A10T/YHCB2004_V4.1/Configuration.h b/config/examples/Geeetech/A10T/YHCB2004_V4.1/Configuration.h index 3936eaf81d..6c19dd2355 100644 --- a/config/examples/Geeetech/A10T/YHCB2004_V4.1/Configuration.h +++ b/config/examples/Geeetech/A10T/YHCB2004_V4.1/Configuration.h @@ -2131,8 +2131,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/Geeetech/A20/Configuration.h b/config/examples/Geeetech/A20/Configuration.h index d4a3e5bd4d..e78b19536c 100644 --- a/config/examples/Geeetech/A20/Configuration.h +++ b/config/examples/Geeetech/A20/Configuration.h @@ -2129,8 +2129,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/Geeetech/A20M/Configuration.h b/config/examples/Geeetech/A20M/Configuration.h index 0242febe17..444c93f460 100644 --- a/config/examples/Geeetech/A20M/Configuration.h +++ b/config/examples/Geeetech/A20M/Configuration.h @@ -2130,8 +2130,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/Geeetech/A20T/Configuration.h b/config/examples/Geeetech/A20T/Configuration.h index cb7c8a4599..7b3f953f26 100644 --- a/config/examples/Geeetech/A20T/Configuration.h +++ b/config/examples/Geeetech/A20T/Configuration.h @@ -2131,8 +2131,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/Geeetech/A30/Configuration.h b/config/examples/Geeetech/A30/Configuration.h index 78b93b5a6f..73f24bb652 100644 --- a/config/examples/Geeetech/A30/Configuration.h +++ b/config/examples/Geeetech/A30/Configuration.h @@ -2127,8 +2127,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/Geeetech/A30M/Configuration.h b/config/examples/Geeetech/A30M/Configuration.h index 75f0299574..d5ae7b5c10 100644 --- a/config/examples/Geeetech/A30M/Configuration.h +++ b/config/examples/Geeetech/A30M/Configuration.h @@ -2127,8 +2127,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/Geeetech/A30T/Configuration.h b/config/examples/Geeetech/A30T/Configuration.h index 804f361be1..35a8735f59 100644 --- a/config/examples/Geeetech/A30T/Configuration.h +++ b/config/examples/Geeetech/A30T/Configuration.h @@ -2127,8 +2127,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/Geeetech/D200/Configuration.h b/config/examples/Geeetech/D200/Configuration.h index 0a64c0f26a..424108d693 100644 --- a/config/examples/Geeetech/D200/Configuration.h +++ b/config/examples/Geeetech/D200/Configuration.h @@ -2127,8 +2127,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/Geeetech/Duplicator5/Configuration.h b/config/examples/Geeetech/Duplicator5/Configuration.h index df7fb34fc2..c5c693cb21 100644 --- a/config/examples/Geeetech/Duplicator5/Configuration.h +++ b/config/examples/Geeetech/Duplicator5/Configuration.h @@ -2128,8 +2128,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points #define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/Geeetech/E180/Configuration.h b/config/examples/Geeetech/E180/Configuration.h index 2869e191c6..24fe321a8d 100644 --- a/config/examples/Geeetech/E180/Configuration.h +++ b/config/examples/Geeetech/E180/Configuration.h @@ -2128,8 +2128,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/Geeetech/GT2560/Configuration.h b/config/examples/Geeetech/GT2560/Configuration.h index 8a10f31407..fe2028214b 100644 --- a/config/examples/Geeetech/GT2560/Configuration.h +++ b/config/examples/Geeetech/GT2560/Configuration.h @@ -2133,8 +2133,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h b/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h index 15071f1051..6bb3bd567e 100644 --- a/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h +++ b/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h @@ -2128,8 +2128,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/Geeetech/M201/Configuration.h b/config/examples/Geeetech/M201/Configuration.h index 89981cfa34..22cec5390c 100644 --- a/config/examples/Geeetech/M201/Configuration.h +++ b/config/examples/Geeetech/M201/Configuration.h @@ -2127,8 +2127,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/Geeetech/MeCreator2/Configuration.h b/config/examples/Geeetech/MeCreator2/Configuration.h index 59324dbb12..12d4880228 100644 --- a/config/examples/Geeetech/MeCreator2/Configuration.h +++ b/config/examples/Geeetech/MeCreator2/Configuration.h @@ -2127,8 +2127,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/Geeetech/Me_creator/Configuration.h b/config/examples/Geeetech/Me_creator/Configuration.h index 486d173655..412eb13c65 100644 --- a/config/examples/Geeetech/Me_creator/Configuration.h +++ b/config/examples/Geeetech/Me_creator/Configuration.h @@ -2128,8 +2128,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points #define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/Geeetech/Me_ducer/Configuration.h b/config/examples/Geeetech/Me_ducer/Configuration.h index 6097e4f359..1cf407c340 100644 --- a/config/examples/Geeetech/Me_ducer/Configuration.h +++ b/config/examples/Geeetech/Me_ducer/Configuration.h @@ -2128,8 +2128,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points #define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/Geeetech/PI3A PRO/Configuration.h b/config/examples/Geeetech/PI3A PRO/Configuration.h index de9f827a05..f8f6caf49c 100644 --- a/config/examples/Geeetech/PI3A PRO/Configuration.h +++ b/config/examples/Geeetech/PI3A PRO/Configuration.h @@ -2138,8 +2138,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points #define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h b/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h index 95a7e6c3dd..b3e6537fb4 100644 --- a/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h +++ b/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h @@ -2139,8 +2139,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h b/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h index 6a41a47b85..cb29277af4 100644 --- a/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h +++ b/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h @@ -2138,8 +2138,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/Geeetech/Prusa i3 Pro C/Configuration.h b/config/examples/Geeetech/Prusa i3 Pro C/Configuration.h index 21d67d4bbd..f29e7f9a46 100644 --- a/config/examples/Geeetech/Prusa i3 Pro C/Configuration.h +++ b/config/examples/Geeetech/Prusa i3 Pro C/Configuration.h @@ -2128,8 +2128,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/Geeetech/Prusa i3 Pro W/Configuration.h b/config/examples/Geeetech/Prusa i3 Pro W/Configuration.h index 76f3a8cdff..eb1ff49fae 100644 --- a/config/examples/Geeetech/Prusa i3 Pro W/Configuration.h +++ b/config/examples/Geeetech/Prusa i3 Pro W/Configuration.h @@ -2128,8 +2128,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/HMS434/Configuration.h b/config/examples/HMS434/Configuration.h index fa7e684ba7..2f204dad1e 100644 --- a/config/examples/HMS434/Configuration.h +++ b/config/examples/HMS434/Configuration.h @@ -2126,8 +2126,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/Infitary/i3-M508/Configuration.h b/config/examples/Infitary/i3-M508/Configuration.h index aab84c10f7..7558c73ef6 100644 --- a/config/examples/Infitary/i3-M508/Configuration.h +++ b/config/examples/Infitary/i3-M508/Configuration.h @@ -2128,8 +2128,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/Intamsys/FunmatHT 4988/Configuration.h b/config/examples/Intamsys/FunmatHT 4988/Configuration.h index 134ea1b437..c8fb5871dc 100644 --- a/config/examples/Intamsys/FunmatHT 4988/Configuration.h +++ b/config/examples/Intamsys/FunmatHT 4988/Configuration.h @@ -2128,8 +2128,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points #define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/JGAurora/A1/Configuration.h b/config/examples/JGAurora/A1/Configuration.h index 1ffa756bf9..cef31be2ee 100644 --- a/config/examples/JGAurora/A1/Configuration.h +++ b/config/examples/JGAurora/A1/Configuration.h @@ -2132,8 +2132,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 5.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 5.0 // (mm) Z height of nozzle between tramming points //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/JGAurora/A3/Configuration.h b/config/examples/JGAurora/A3/Configuration.h index 9da431ef03..60bcf4550d 100644 --- a/config/examples/JGAurora/A3/Configuration.h +++ b/config/examples/JGAurora/A3/Configuration.h @@ -2128,8 +2128,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/JGAurora/A5/Configuration.h b/config/examples/JGAurora/A5/Configuration.h index 8e1911a4a5..7a28f5f2a7 100644 --- a/config/examples/JGAurora/A5/Configuration.h +++ b/config/examples/JGAurora/A5/Configuration.h @@ -2136,8 +2136,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/JGAurora/A5S/Configuration.h b/config/examples/JGAurora/A5S/Configuration.h index 57d203d0e8..4b0bcb057c 100644 --- a/config/examples/JGAurora/A5S/Configuration.h +++ b/config/examples/JGAurora/A5S/Configuration.h @@ -2132,8 +2132,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 5.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 5.0 // (mm) Z height of nozzle between tramming points //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/JGAurora/Magic/Configuration.h b/config/examples/JGAurora/Magic/Configuration.h index 056261160f..2816379666 100644 --- a/config/examples/JGAurora/Magic/Configuration.h +++ b/config/examples/JGAurora/Magic/Configuration.h @@ -2128,8 +2128,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points #define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/Kingroon/KP3/Configuration.h b/config/examples/Kingroon/KP3/Configuration.h index 064fb60714..49b1634a19 100644 --- a/config/examples/Kingroon/KP3/Configuration.h +++ b/config/examples/Kingroon/KP3/Configuration.h @@ -2127,8 +2127,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points #define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/Kingroon/KP3S/Configuration.h b/config/examples/Kingroon/KP3S/Configuration.h index de27ecdab0..0e4d2a0bf9 100644 --- a/config/examples/Kingroon/KP3S/Configuration.h +++ b/config/examples/Kingroon/KP3S/Configuration.h @@ -2128,8 +2128,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points #define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/Kingroon/KP5L/Configuration.h b/config/examples/Kingroon/KP5L/Configuration.h index 46979a777e..f43d52e195 100644 --- a/config/examples/Kingroon/KP5L/Configuration.h +++ b/config/examples/Kingroon/KP5L/Configuration.h @@ -2128,8 +2128,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/Labists/ET4/Configuration.h b/config/examples/Labists/ET4/Configuration.h index 68d1474870..f8ec042a13 100644 --- a/config/examples/Labists/ET4/Configuration.h +++ b/config/examples/Labists/ET4/Configuration.h @@ -2134,8 +2134,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.05 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.05 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points #define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/Longer/LK5/Configuration.h b/config/examples/Longer/LK5/Configuration.h index 64223ce013..c2ff9f0a15 100644 --- a/config/examples/Longer/LK5/Configuration.h +++ b/config/examples/Longer/LK5/Configuration.h @@ -2129,8 +2129,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.2 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.2 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/LulzBot/Mini2/Teensy/Configuration.h b/config/examples/LulzBot/Mini2/Teensy/Configuration.h index 31248c03db..b4f86d172d 100644 --- a/config/examples/LulzBot/Mini2/Teensy/Configuration.h +++ b/config/examples/LulzBot/Mini2/Teensy/Configuration.h @@ -2148,8 +2148,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/LulzBot/TAZ4/Configuration.h b/config/examples/LulzBot/TAZ4/Configuration.h index ae275882dc..60cfb70a66 100644 --- a/config/examples/LulzBot/TAZ4/Configuration.h +++ b/config/examples/LulzBot/TAZ4/Configuration.h @@ -2139,8 +2139,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/MBot/Cube/Configuration.h b/config/examples/MBot/Cube/Configuration.h index 22b513ad14..7d4229085c 100644 --- a/config/examples/MBot/Cube/Configuration.h +++ b/config/examples/MBot/Cube/Configuration.h @@ -2128,8 +2128,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/MakerFarm/Pegasus 12/Configuration.h b/config/examples/MakerFarm/Pegasus 12/Configuration.h index bc5723739d..eb7a0ee683 100644 --- a/config/examples/MakerFarm/Pegasus 12/Configuration.h +++ b/config/examples/MakerFarm/Pegasus 12/Configuration.h @@ -2134,8 +2134,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 5.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 5.0 // (mm) Z height of nozzle between tramming points #define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/MakerParts/Configuration.h b/config/examples/MakerParts/Configuration.h index a22f69edeb..961c681eb2 100644 --- a/config/examples/MakerParts/Configuration.h +++ b/config/examples/MakerParts/Configuration.h @@ -2128,8 +2128,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/MakerTech3D/Proforge2sDual/Configuration.h b/config/examples/MakerTech3D/Proforge2sDual/Configuration.h index dcaf7a670f..f2fdcd3ad2 100644 --- a/config/examples/MakerTech3D/Proforge2sDual/Configuration.h +++ b/config/examples/MakerTech3D/Proforge2sDual/Configuration.h @@ -2131,8 +2131,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/Malyan/M150/Configuration.h b/config/examples/Malyan/M150/Configuration.h index 3b7d2e8bd6..49ba74f5f9 100644 --- a/config/examples/Malyan/M150/Configuration.h +++ b/config/examples/Malyan/M150/Configuration.h @@ -2156,8 +2156,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/Malyan/M180/Configuration.h b/config/examples/Malyan/M180/Configuration.h index 496db7cf7c..014d9b0f24 100644 --- a/config/examples/Malyan/M180/Configuration.h +++ b/config/examples/Malyan/M180/Configuration.h @@ -2129,8 +2129,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/Malyan/M200/Configuration.h b/config/examples/Malyan/M200/Configuration.h index a48e40cc16..0acbd3e7d1 100644 --- a/config/examples/Malyan/M200/Configuration.h +++ b/config/examples/Malyan/M200/Configuration.h @@ -2134,8 +2134,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/Micromake/C1/basic/Configuration.h b/config/examples/Micromake/C1/basic/Configuration.h index d20ff2823e..13b13a1abe 100644 --- a/config/examples/Micromake/C1/basic/Configuration.h +++ b/config/examples/Micromake/C1/basic/Configuration.h @@ -2132,8 +2132,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/Micromake/C1/enhanced/Configuration.h b/config/examples/Micromake/C1/enhanced/Configuration.h index 60af3b794a..03231e584b 100644 --- a/config/examples/Micromake/C1/enhanced/Configuration.h +++ b/config/examples/Micromake/C1/enhanced/Configuration.h @@ -2132,8 +2132,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/Mks/Robin/Configuration.h b/config/examples/Mks/Robin/Configuration.h index 88fac4e5db..d1a65c7db9 100644 --- a/config/examples/Mks/Robin/Configuration.h +++ b/config/examples/Mks/Robin/Configuration.h @@ -2128,8 +2128,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/Mks/Robin_Lite3/Configuration.h b/config/examples/Mks/Robin_Lite3/Configuration.h index a74827e050..417e9ee4c7 100644 --- a/config/examples/Mks/Robin_Lite3/Configuration.h +++ b/config/examples/Mks/Robin_Lite3/Configuration.h @@ -2136,8 +2136,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/Mks/Robin_Pro/Configuration.h b/config/examples/Mks/Robin_Pro/Configuration.h index 213077302a..92e97ac1b3 100644 --- a/config/examples/Mks/Robin_Pro/Configuration.h +++ b/config/examples/Mks/Robin_Pro/Configuration.h @@ -2130,8 +2130,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/Mks/Sbase/Configuration.h b/config/examples/Mks/Sbase/Configuration.h index 9343444a46..f636c3e9fc 100644 --- a/config/examples/Mks/Sbase/Configuration.h +++ b/config/examples/Mks/Sbase/Configuration.h @@ -2128,8 +2128,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/Modix/Big60/Configuration.h b/config/examples/Modix/Big60/Configuration.h index 5d4c560fde..a43c8272e3 100644 --- a/config/examples/Modix/Big60/Configuration.h +++ b/config/examples/Modix/Big60/Configuration.h @@ -2128,8 +2128,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points #define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/Nextion/Configuration.h b/config/examples/Nextion/Configuration.h index 21f77cb1e0..56001c554d 100644 --- a/config/examples/Nextion/Configuration.h +++ b/config/examples/Nextion/Configuration.h @@ -2128,8 +2128,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/Opulo/Lumen_REV3/Configuration.h b/config/examples/Opulo/Lumen_REV3/Configuration.h index 198ba856e8..ebb6677f83 100644 --- a/config/examples/Opulo/Lumen_REV3/Configuration.h +++ b/config/examples/Opulo/Lumen_REV3/Configuration.h @@ -2128,8 +2128,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/Opulo/Lumen_REV4/Configuration.h b/config/examples/Opulo/Lumen_REV4/Configuration.h index 0922052e4e..506e686077 100644 --- a/config/examples/Opulo/Lumen_REV4/Configuration.h +++ b/config/examples/Opulo/Lumen_REV4/Configuration.h @@ -2128,8 +2128,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/Ortur 4/Configuration.h b/config/examples/Ortur 4/Configuration.h index 662f5f3f4a..1a3dc827a4 100644 --- a/config/examples/Ortur 4/Configuration.h +++ b/config/examples/Ortur 4/Configuration.h @@ -2128,8 +2128,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 40, 40, 40, 40 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 6.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 6.0 // (mm) Z height of nozzle between tramming points //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/Polargraph/Configuration.h b/config/examples/Polargraph/Configuration.h index d63e18d7be..0e7ce965e9 100644 --- a/config/examples/Polargraph/Configuration.h +++ b/config/examples/Polargraph/Configuration.h @@ -2132,8 +2132,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/Printrbot/PrintrboardG2/Configuration.h b/config/examples/Printrbot/PrintrboardG2/Configuration.h index ddcb56923d..ee337a592b 100644 --- a/config/examples/Printrbot/PrintrboardG2/Configuration.h +++ b/config/examples/Printrbot/PrintrboardG2/Configuration.h @@ -2130,8 +2130,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/Printrbot/Simple Metal RevD/Configuration.h b/config/examples/Printrbot/Simple Metal RevD/Configuration.h index eba72cc07f..4db8ad34d8 100644 --- a/config/examples/Printrbot/Simple Metal RevD/Configuration.h +++ b/config/examples/Printrbot/Simple Metal RevD/Configuration.h @@ -2128,8 +2128,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/Prusa/MK3/Configuration.h b/config/examples/Prusa/MK3/Configuration.h index f1f5be0ed7..b994d2e0ea 100644 --- a/config/examples/Prusa/MK3/Configuration.h +++ b/config/examples/Prusa/MK3/Configuration.h @@ -2161,8 +2161,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/Prusa/MK3S-BigTreeTech-BTT002/Configuration.h b/config/examples/Prusa/MK3S-BigTreeTech-BTT002/Configuration.h index 5ae6c57843..3d204a6303 100644 --- a/config/examples/Prusa/MK3S-BigTreeTech-BTT002/Configuration.h +++ b/config/examples/Prusa/MK3S-BigTreeTech-BTT002/Configuration.h @@ -2152,8 +2152,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/Qidi/Qidi 1/Configuration.h b/config/examples/Qidi/Qidi 1/Configuration.h index 505d378714..d1dd6b95fb 100644 --- a/config/examples/Qidi/Qidi 1/Configuration.h +++ b/config/examples/Qidi/Qidi 1/Configuration.h @@ -2129,8 +2129,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/Raiscube/A8r/Configuration.h b/config/examples/Raiscube/A8r/Configuration.h index b55f973654..49aef339da 100644 --- a/config/examples/Raiscube/A8r/Configuration.h +++ b/config/examples/Raiscube/A8r/Configuration.h @@ -2166,8 +2166,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/RapideLite/RL200/Configuration.h b/config/examples/RapideLite/RL200/Configuration.h index 357de2b71b..f663b4320f 100644 --- a/config/examples/RapideLite/RL200/Configuration.h +++ b/config/examples/RapideLite/RL200/Configuration.h @@ -2128,8 +2128,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/Renkforce/RF100/Configuration.h b/config/examples/Renkforce/RF100/Configuration.h index 28c8c40910..a43bffab5e 100644 --- a/config/examples/Renkforce/RF100/Configuration.h +++ b/config/examples/Renkforce/RF100/Configuration.h @@ -2133,8 +2133,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/Renkforce/RF100XL/Configuration.h b/config/examples/Renkforce/RF100XL/Configuration.h index 2f33447626..5bba219e95 100644 --- a/config/examples/Renkforce/RF100XL/Configuration.h +++ b/config/examples/Renkforce/RF100XL/Configuration.h @@ -2133,8 +2133,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/Renkforce/RF100v2/Configuration.h b/config/examples/Renkforce/RF100v2/Configuration.h index 166277873d..bed3e74632 100644 --- a/config/examples/Renkforce/RF100v2/Configuration.h +++ b/config/examples/Renkforce/RF100v2/Configuration.h @@ -2133,8 +2133,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/RepRapPro/Huxley/Configuration.h b/config/examples/RepRapPro/Huxley/Configuration.h index 44af593488..ae612d929a 100644 --- a/config/examples/RepRapPro/Huxley/Configuration.h +++ b/config/examples/RepRapPro/Huxley/Configuration.h @@ -2178,8 +2178,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/RepRapWorld/Megatronics/Configuration.h b/config/examples/RepRapWorld/Megatronics/Configuration.h index 7d749fa1da..35de104560 100644 --- a/config/examples/RepRapWorld/Megatronics/Configuration.h +++ b/config/examples/RepRapWorld/Megatronics/Configuration.h @@ -2128,8 +2128,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/RepRapWorld/Minitronics20/CNC/Configuration.h b/config/examples/RepRapWorld/Minitronics20/CNC/Configuration.h index e570fd9797..12c00d75d8 100644 --- a/config/examples/RepRapWorld/Minitronics20/CNC/Configuration.h +++ b/config/examples/RepRapWorld/Minitronics20/CNC/Configuration.h @@ -2128,8 +2128,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/RigidBot/Configuration.h b/config/examples/RigidBot/Configuration.h index e5c331389b..92786149ea 100644 --- a/config/examples/RigidBot/Configuration.h +++ b/config/examples/RigidBot/Configuration.h @@ -2142,8 +2142,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/Robo3D/R1+/Configuration.h b/config/examples/Robo3D/R1+/Configuration.h index 98f1b3c4bf..283b472d93 100644 --- a/config/examples/Robo3D/R1+/Configuration.h +++ b/config/examples/Robo3D/R1+/Configuration.h @@ -2128,8 +2128,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/SCARA/MP_SCARA/Configuration.h b/config/examples/SCARA/MP_SCARA/Configuration.h index 68ee4f34e7..f28fdd85be 100644 --- a/config/examples/SCARA/MP_SCARA/Configuration.h +++ b/config/examples/SCARA/MP_SCARA/Configuration.h @@ -2130,8 +2130,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/SCARA/Morgan/Configuration.h b/config/examples/SCARA/Morgan/Configuration.h index 7f08e47213..8946b00bac 100644 --- a/config/examples/SCARA/Morgan/Configuration.h +++ b/config/examples/SCARA/Morgan/Configuration.h @@ -2129,8 +2129,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/STM32/Black_STM32F407VET6/Configuration.h b/config/examples/STM32/Black_STM32F407VET6/Configuration.h index 54fb805e9c..bff570c892 100644 --- a/config/examples/STM32/Black_STM32F407VET6/Configuration.h +++ b/config/examples/STM32/Black_STM32F407VET6/Configuration.h @@ -2128,8 +2128,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/STM32/STM32F103RE/Configuration.h b/config/examples/STM32/STM32F103RE/Configuration.h index 42d7aaa84d..0810a96cee 100644 --- a/config/examples/STM32/STM32F103RE/Configuration.h +++ b/config/examples/STM32/STM32F103RE/Configuration.h @@ -2128,8 +2128,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/Sanguinololu/Configuration.h b/config/examples/Sanguinololu/Configuration.h index d9b22adfe7..27fe8d69f9 100644 --- a/config/examples/Sanguinololu/Configuration.h +++ b/config/examples/Sanguinololu/Configuration.h @@ -2159,8 +2159,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/Simax/Mi-M200/Configuration.h b/config/examples/Simax/Mi-M200/Configuration.h index d9fa45474e..cf6d1ee7b7 100644 --- a/config/examples/Simax/Mi-M200/Configuration.h +++ b/config/examples/Simax/Mi-M200/Configuration.h @@ -2129,8 +2129,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/Simulator/Configuration.h b/config/examples/Simulator/Configuration.h index ee892612b1..bb344f14d9 100644 --- a/config/examples/Simulator/Configuration.h +++ b/config/examples/Simulator/Configuration.h @@ -2145,8 +2145,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/Sovol/SV-01/BigTreeTech SKR E3 Turbo/Configuration.h b/config/examples/Sovol/SV-01/BigTreeTech SKR E3 Turbo/Configuration.h index 10b7826367..46cba638d2 100644 --- a/config/examples/Sovol/SV-01/BigTreeTech SKR E3 Turbo/Configuration.h +++ b/config/examples/Sovol/SV-01/BigTreeTech SKR E3 Turbo/Configuration.h @@ -2141,8 +2141,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/Sovol/SV-01/BigTreeTech SKR Mini E3 2.0/Configuration.h b/config/examples/Sovol/SV-01/BigTreeTech SKR Mini E3 2.0/Configuration.h index a9b0f99e80..0672e955d8 100644 --- a/config/examples/Sovol/SV-01/BigTreeTech SKR Mini E3 2.0/Configuration.h +++ b/config/examples/Sovol/SV-01/BigTreeTech SKR Mini E3 2.0/Configuration.h @@ -2139,8 +2139,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/Sovol/SV-01/BigTreeTech SKR Mini E3 3.0/Configuration.h b/config/examples/Sovol/SV-01/BigTreeTech SKR Mini E3 3.0/Configuration.h index 7f251d16f5..61b217d177 100644 --- a/config/examples/Sovol/SV-01/BigTreeTech SKR Mini E3 3.0/Configuration.h +++ b/config/examples/Sovol/SV-01/BigTreeTech SKR Mini E3 3.0/Configuration.h @@ -2141,8 +2141,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/Sovol/SV-01/CrealityV22/Configuration.h b/config/examples/Sovol/SV-01/CrealityV22/Configuration.h index 039086d56c..892ccdfa5a 100644 --- a/config/examples/Sovol/SV-01/CrealityV22/Configuration.h +++ b/config/examples/Sovol/SV-01/CrealityV22/Configuration.h @@ -2138,8 +2138,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points #define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/Sovol/SV-01/CrealityV221/Configuration.h b/config/examples/Sovol/SV-01/CrealityV221/Configuration.h index 45b6346b50..714aa475cc 100644 --- a/config/examples/Sovol/SV-01/CrealityV221/Configuration.h +++ b/config/examples/Sovol/SV-01/CrealityV221/Configuration.h @@ -2138,8 +2138,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points #define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/Sovol/SV-02/Configuration.h b/config/examples/Sovol/SV-02/Configuration.h index 33b1484106..591f92c727 100644 --- a/config/examples/Sovol/SV-02/Configuration.h +++ b/config/examples/Sovol/SV-02/Configuration.h @@ -2138,8 +2138,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points #define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/Sovol/SV-03/Configuration.h b/config/examples/Sovol/SV-03/Configuration.h index 1ff7476384..fc686795d1 100644 --- a/config/examples/Sovol/SV-03/Configuration.h +++ b/config/examples/Sovol/SV-03/Configuration.h @@ -2128,8 +2128,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 50, 30, 50, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner #define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/Sunlu/S8/Configuration.h b/config/examples/Sunlu/S8/Configuration.h index 3704da1040..8a0bd24025 100644 --- a/config/examples/Sunlu/S8/Configuration.h +++ b/config/examples/Sunlu/S8/Configuration.h @@ -2129,8 +2129,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/TPARA/AXEL_TPARA/Configuration.h b/config/examples/TPARA/AXEL_TPARA/Configuration.h index a7ace30d9e..b42b89df21 100644 --- a/config/examples/TPARA/AXEL_TPARA/Configuration.h +++ b/config/examples/TPARA/AXEL_TPARA/Configuration.h @@ -2134,8 +2134,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/Tevo/Michelangelo/Configuration.h b/config/examples/Tevo/Michelangelo/Configuration.h index f360c286df..6d92f65c7a 100644 --- a/config/examples/Tevo/Michelangelo/Configuration.h +++ b/config/examples/Tevo/Michelangelo/Configuration.h @@ -2129,8 +2129,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/Tevo/Nereus/Configuration.h b/config/examples/Tevo/Nereus/Configuration.h index b88aa23874..b72485a02a 100644 --- a/config/examples/Tevo/Nereus/Configuration.h +++ b/config/examples/Tevo/Nereus/Configuration.h @@ -2129,8 +2129,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points #define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/Tevo/Tarantula Pro/Configuration.h b/config/examples/Tevo/Tarantula Pro/Configuration.h index 21a3caf934..71e6b28b08 100644 --- a/config/examples/Tevo/Tarantula Pro/Configuration.h +++ b/config/examples/Tevo/Tarantula Pro/Configuration.h @@ -2129,8 +2129,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration.h b/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration.h index 495c30f264..77210d05da 100644 --- a/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration.h +++ b/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration.h @@ -2129,8 +2129,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration.h b/config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration.h index 54d4236f62..35215f0bf4 100644 --- a/config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration.h +++ b/config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration.h @@ -2129,8 +2129,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/Tinkerine/Ditto Pro/RAMPS 1.4/Configuration.h b/config/examples/Tinkerine/Ditto Pro/RAMPS 1.4/Configuration.h index 76090c1b89..5d6321efb6 100644 --- a/config/examples/Tinkerine/Ditto Pro/RAMPS 1.4/Configuration.h +++ b/config/examples/Tinkerine/Ditto Pro/RAMPS 1.4/Configuration.h @@ -2128,8 +2128,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 0, 0, 0, 0 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points #define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/TinyBoy2/Configuration.h b/config/examples/TinyBoy2/Configuration.h index 6d1f66a710..12ba338903 100644 --- a/config/examples/TinyBoy2/Configuration.h +++ b/config/examples/TinyBoy2/Configuration.h @@ -2174,8 +2174,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/Tronxy/D01/CXY-v6-191017 board/Configuration.h b/config/examples/Tronxy/D01/CXY-v6-191017 board/Configuration.h index abd9558bca..a84c7b3bf7 100644 --- a/config/examples/Tronxy/D01/CXY-v6-191017 board/Configuration.h +++ b/config/examples/Tronxy/D01/CXY-v6-191017 board/Configuration.h @@ -2137,8 +2137,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 20, 20, 20, 20 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points #define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/Tronxy/X1/Configuration.h b/config/examples/Tronxy/X1/Configuration.h index 68704da9d6..220324858c 100644 --- a/config/examples/Tronxy/X1/Configuration.h +++ b/config/examples/Tronxy/X1/Configuration.h @@ -2129,8 +2129,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/Tronxy/X3A/Configuration.h b/config/examples/Tronxy/X3A/Configuration.h index be25122a90..8f6c79ebb3 100644 --- a/config/examples/Tronxy/X3A/Configuration.h +++ b/config/examples/Tronxy/X3A/Configuration.h @@ -2132,8 +2132,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/Tronxy/X5S-2E/Green Board (Chitu V5)/Configuration.h b/config/examples/Tronxy/X5S-2E/Green Board (Chitu V5)/Configuration.h index 4c409e02ab..857340cdb9 100644 --- a/config/examples/Tronxy/X5S-2E/Green Board (Chitu V5)/Configuration.h +++ b/config/examples/Tronxy/X5S-2E/Green Board (Chitu V5)/Configuration.h @@ -2129,8 +2129,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/Tronxy/X5S-2E/Red Board (Tronxy 3.1.0)/Configuration.h b/config/examples/Tronxy/X5S-2E/Red Board (Tronxy 3.1.0)/Configuration.h index c1f7ad9037..d6be0a6072 100644 --- a/config/examples/Tronxy/X5S-2E/Red Board (Tronxy 3.1.0)/Configuration.h +++ b/config/examples/Tronxy/X5S-2E/Red Board (Tronxy 3.1.0)/Configuration.h @@ -2137,8 +2137,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/Tronxy/X5S/Configuration.h b/config/examples/Tronxy/X5S/Configuration.h index b0f7c6f840..5d8877d743 100644 --- a/config/examples/Tronxy/X5S/Configuration.h +++ b/config/examples/Tronxy/X5S/Configuration.h @@ -2128,8 +2128,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/Tronxy/X5SA-2E/Configuration.h b/config/examples/Tronxy/X5SA-2E/Configuration.h index 39341418ec..a7704a707e 100644 --- a/config/examples/Tronxy/X5SA-2E/Configuration.h +++ b/config/examples/Tronxy/X5SA-2E/Configuration.h @@ -2131,8 +2131,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 50, 50, 50, 50 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner #define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/Tronxy/X5SA/Configuration.h b/config/examples/Tronxy/X5SA/Configuration.h index 96a88afcdc..9e8b880467 100644 --- a/config/examples/Tronxy/X5SA/Configuration.h +++ b/config/examples/Tronxy/X5SA/Configuration.h @@ -2130,8 +2130,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/Tronxy/XY100/Configuration.h b/config/examples/Tronxy/XY100/Configuration.h index 26c2a5a758..1a8d020763 100644 --- a/config/examples/Tronxy/XY100/Configuration.h +++ b/config/examples/Tronxy/XY100/Configuration.h @@ -2135,8 +2135,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/Tronxy/XY2-Pro/Configuration.h b/config/examples/Tronxy/XY2-Pro/Configuration.h index a40658e297..6587b29222 100644 --- a/config/examples/Tronxy/XY2-Pro/Configuration.h +++ b/config/examples/Tronxy/XY2-Pro/Configuration.h @@ -2162,8 +2162,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/Two Trees/BlueR Plus/Configuration.h b/config/examples/Two Trees/BlueR Plus/Configuration.h index a1b60501f4..6ec57cfba2 100644 --- a/config/examples/Two Trees/BlueR Plus/Configuration.h +++ b/config/examples/Two Trees/BlueR Plus/Configuration.h @@ -2130,8 +2130,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 10 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 10 // (mm) Z height of nozzle between tramming points #define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/Two Trees/BlueR/BlueR V1/Configuration.h b/config/examples/Two Trees/BlueR/BlueR V1/Configuration.h index 232f5c6cf1..8e46d661b2 100644 --- a/config/examples/Two Trees/BlueR/BlueR V1/Configuration.h +++ b/config/examples/Two Trees/BlueR/BlueR V1/Configuration.h @@ -2157,8 +2157,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 10 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 10 // (mm) Z height of nozzle between tramming points #define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/Two Trees/BlueR/BlueR V2/Configuration.h b/config/examples/Two Trees/BlueR/BlueR V2/Configuration.h index 91f260a38a..148647d29f 100644 --- a/config/examples/Two Trees/BlueR/BlueR V2/Configuration.h +++ b/config/examples/Two Trees/BlueR/BlueR V2/Configuration.h @@ -2162,8 +2162,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 10 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 10 // (mm) Z height of nozzle between tramming points #define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/Two Trees/BlueR/BlueR V3/Configuration.h b/config/examples/Two Trees/BlueR/BlueR V3/Configuration.h index 607247a064..f70a3e1ef3 100644 --- a/config/examples/Two Trees/BlueR/BlueR V3/Configuration.h +++ b/config/examples/Two Trees/BlueR/BlueR V3/Configuration.h @@ -2169,8 +2169,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 10.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 10.0 // (mm) Z height of nozzle between tramming points #define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2.1/Configuration.h b/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2.1/Configuration.h index 33e7636cb0..8c9d239266 100644 --- a/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2.1/Configuration.h +++ b/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2.1/Configuration.h @@ -2166,8 +2166,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 35, 35, 35, 35 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2/Configuration.h b/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2/Configuration.h index 6826efc569..afc8b5c819 100644 --- a/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2/Configuration.h +++ b/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2/Configuration.h @@ -2166,8 +2166,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 35, 35, 35, 35 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/Two Trees/Sapphire Pro/Configuration.h b/config/examples/Two Trees/Sapphire Pro/Configuration.h index d83a8344e4..5c95cb8f65 100644 --- a/config/examples/Two Trees/Sapphire Pro/Configuration.h +++ b/config/examples/Two Trees/Sapphire Pro/Configuration.h @@ -2160,8 +2160,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points #define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/UltiMachine/Archim1/Configuration.h b/config/examples/UltiMachine/Archim1/Configuration.h index 6bccc96406..37c3737901 100644 --- a/config/examples/UltiMachine/Archim1/Configuration.h +++ b/config/examples/UltiMachine/Archim1/Configuration.h @@ -2128,8 +2128,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/UltiMachine/Archim2/Configuration.h b/config/examples/UltiMachine/Archim2/Configuration.h index 3570f17cce..41aa2a607b 100644 --- a/config/examples/UltiMachine/Archim2/Configuration.h +++ b/config/examples/UltiMachine/Archim2/Configuration.h @@ -2128,8 +2128,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/Ultimaker/Ultimaker 2+/Configuration.h b/config/examples/Ultimaker/Ultimaker 2+/Configuration.h index 03c1414a17..6d490c5603 100644 --- a/config/examples/Ultimaker/Ultimaker 2+/Configuration.h +++ b/config/examples/Ultimaker/Ultimaker 2+/Configuration.h @@ -2131,8 +2131,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/Ultimaker/Ultimaker 2/Configuration.h b/config/examples/Ultimaker/Ultimaker 2/Configuration.h index d643766ed4..4820d07890 100644 --- a/config/examples/Ultimaker/Ultimaker 2/Configuration.h +++ b/config/examples/Ultimaker/Ultimaker 2/Configuration.h @@ -2145,8 +2145,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/Ultimaker/Ultimaker Original (1.5.7)/Configuration.h b/config/examples/Ultimaker/Ultimaker Original (1.5.7)/Configuration.h index 013aa0ca90..6d753939d3 100644 --- a/config/examples/Ultimaker/Ultimaker Original (1.5.7)/Configuration.h +++ b/config/examples/Ultimaker/Ultimaker Original (1.5.7)/Configuration.h @@ -2128,8 +2128,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/Ultimaker/Ultimaker Original Plus (2.1.1)/Configuration.h b/config/examples/Ultimaker/Ultimaker Original Plus (2.1.1)/Configuration.h index 269b4da170..08913ce98c 100644 --- a/config/examples/Ultimaker/Ultimaker Original Plus (2.1.1)/Configuration.h +++ b/config/examples/Ultimaker/Ultimaker Original Plus (2.1.1)/Configuration.h @@ -2131,8 +2131,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/Ultimaker/Ultimaker Original Plus DXU/Configuration.h b/config/examples/Ultimaker/Ultimaker Original Plus DXU/Configuration.h index d25aadb3b2..65c81b3f8a 100644 --- a/config/examples/Ultimaker/Ultimaker Original Plus DXU/Configuration.h +++ b/config/examples/Ultimaker/Ultimaker Original Plus DXU/Configuration.h @@ -2133,8 +2133,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/VORONDesign/Configuration.h b/config/examples/VORONDesign/Configuration.h index 89dec532a5..8a283271ae 100644 --- a/config/examples/VORONDesign/Configuration.h +++ b/config/examples/VORONDesign/Configuration.h @@ -2128,8 +2128,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/Velleman/K8200 Upgraded/Configuration.h b/config/examples/Velleman/K8200 Upgraded/Configuration.h index 2e7f8149d7..4d95ec867e 100644 --- a/config/examples/Velleman/K8200 Upgraded/Configuration.h +++ b/config/examples/Velleman/K8200 Upgraded/Configuration.h @@ -2164,8 +2164,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/Velleman/K8200/Configuration.h b/config/examples/Velleman/K8200/Configuration.h index 6587efd13b..ae4ebd7e75 100644 --- a/config/examples/Velleman/K8200/Configuration.h +++ b/config/examples/Velleman/K8200/Configuration.h @@ -2167,8 +2167,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/Velleman/K8400/Dual-head/Configuration.h b/config/examples/Velleman/K8400/Dual-head/Configuration.h index 5dc201f15d..1f288ba23e 100644 --- a/config/examples/Velleman/K8400/Dual-head/Configuration.h +++ b/config/examples/Velleman/K8400/Dual-head/Configuration.h @@ -2129,8 +2129,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/Velleman/K8400/Single-head/Configuration.h b/config/examples/Velleman/K8400/Single-head/Configuration.h index 045be875c9..f8cb5ba6ad 100644 --- a/config/examples/Velleman/K8400/Single-head/Configuration.h +++ b/config/examples/Velleman/K8400/Single-head/Configuration.h @@ -2129,8 +2129,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/WASP/PowerWASP/Configuration.h b/config/examples/WASP/PowerWASP/Configuration.h index ecb6e2d9e7..3e7c7f2947 100644 --- a/config/examples/WASP/PowerWASP/Configuration.h +++ b/config/examples/WASP/PowerWASP/Configuration.h @@ -2142,8 +2142,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/Wanhao/Duplicator 4S/Configuration.h b/config/examples/Wanhao/Duplicator 4S/Configuration.h index 0a3843cce2..2e874841a8 100644 --- a/config/examples/Wanhao/Duplicator 4S/Configuration.h +++ b/config/examples/Wanhao/Duplicator 4S/Configuration.h @@ -2128,8 +2128,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/Wanhao/Duplicator 6/Configuration.h b/config/examples/Wanhao/Duplicator 6/Configuration.h index 70e30386d4..79346757a0 100644 --- a/config/examples/Wanhao/Duplicator 6/Configuration.h +++ b/config/examples/Wanhao/Duplicator 6/Configuration.h @@ -2128,8 +2128,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/Wanhao/Duplicator i3 2.1/Configuration.h b/config/examples/Wanhao/Duplicator i3 2.1/Configuration.h index ed6796a65f..4839ab3bed 100644 --- a/config/examples/Wanhao/Duplicator i3 2.1/Configuration.h +++ b/config/examples/Wanhao/Duplicator i3 2.1/Configuration.h @@ -2128,8 +2128,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/Wanhao/Duplicator i3 Mini/Configuration.h b/config/examples/Wanhao/Duplicator i3 Mini/Configuration.h index 9ce7e1f786..e56fc00c8a 100644 --- a/config/examples/Wanhao/Duplicator i3 Mini/Configuration.h +++ b/config/examples/Wanhao/Duplicator i3 Mini/Configuration.h @@ -2129,8 +2129,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/Wanhao/Duplicator i3 Plus/Configuration.h b/config/examples/Wanhao/Duplicator i3 Plus/Configuration.h index 2844e5f1e1..066604a9d8 100644 --- a/config/examples/Wanhao/Duplicator i3 Plus/Configuration.h +++ b/config/examples/Wanhao/Duplicator i3 Plus/Configuration.h @@ -2128,8 +2128,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/Weedo/Tina2/V2/Configuration.h b/config/examples/Weedo/Tina2/V2/Configuration.h index cf3eb77e14..f095dfa460 100644 --- a/config/examples/Weedo/Tina2/V2/Configuration.h +++ b/config/examples/Weedo/Tina2/V2/Configuration.h @@ -2128,8 +2128,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/Weedo/Tina2/V3/Configuration.h b/config/examples/Weedo/Tina2/V3/Configuration.h index fdbf9da603..f2a3711465 100644 --- a/config/examples/Weedo/Tina2/V3/Configuration.h +++ b/config/examples/Weedo/Tina2/V3/Configuration.h @@ -2128,8 +2128,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/Weistek/wt150/Configuration.h b/config/examples/Weistek/wt150/Configuration.h index 5469c3a645..70786ef78a 100644 --- a/config/examples/Weistek/wt150/Configuration.h +++ b/config/examples/Weistek/wt150/Configuration.h @@ -2129,8 +2129,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/Zonestar/P802M/Configuration.h b/config/examples/Zonestar/P802M/Configuration.h index 2674cb248d..0ea8b9af80 100644 --- a/config/examples/Zonestar/P802M/Configuration.h +++ b/config/examples/Zonestar/P802M/Configuration.h @@ -2129,8 +2129,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (A4988)/Configuration.h b/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (A4988)/Configuration.h index 14ed6cb847..dc1467e669 100644 --- a/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (A4988)/Configuration.h +++ b/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (A4988)/Configuration.h @@ -2133,8 +2133,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (TMC2209)/Configuration.h b/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (TMC2209)/Configuration.h index 0c733fb85a..a59cfb89fe 100755 --- a/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (TMC2209)/Configuration.h +++ b/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (TMC2209)/Configuration.h @@ -2132,8 +2132,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/delta/Anycubic/Kossel Linear Plus/Configuration.h b/config/examples/delta/Anycubic/Kossel Linear Plus/Configuration.h index b6fadeea88..b19a6cf22d 100644 --- a/config/examples/delta/Anycubic/Kossel Linear Plus/Configuration.h +++ b/config/examples/delta/Anycubic/Kossel Linear Plus/Configuration.h @@ -2194,8 +2194,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/delta/Anycubic/Kossel/Configuration.h b/config/examples/delta/Anycubic/Kossel/Configuration.h index b44a837803..edc98dfea0 100644 --- a/config/examples/delta/Anycubic/Kossel/Configuration.h +++ b/config/examples/delta/Anycubic/Kossel/Configuration.h @@ -2199,8 +2199,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/delta/Anycubic/Predator/Configuration.h b/config/examples/delta/Anycubic/Predator/Configuration.h index a782ab8016..a488c29ec7 100644 --- a/config/examples/delta/Anycubic/Predator/Configuration.h +++ b/config/examples/delta/Anycubic/Predator/Configuration.h @@ -2136,8 +2136,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/delta/Dreammaker/Overlord/Configuration.h b/config/examples/delta/Dreammaker/Overlord/Configuration.h index 8459400297..f0dce262dc 100644 --- a/config/examples/delta/Dreammaker/Overlord/Configuration.h +++ b/config/examples/delta/Dreammaker/Overlord/Configuration.h @@ -2135,8 +2135,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/delta/Dreammaker/Overlord_Pro/Configuration.h b/config/examples/delta/Dreammaker/Overlord_Pro/Configuration.h index 486bf8c7f3..8b68daf34b 100644 --- a/config/examples/delta/Dreammaker/Overlord_Pro/Configuration.h +++ b/config/examples/delta/Dreammaker/Overlord_Pro/Configuration.h @@ -2142,8 +2142,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/delta/FLSUN/Q5-nano_v1/Configuration.h b/config/examples/delta/FLSUN/Q5-nano_v1/Configuration.h index 1bdceb9a36..c98f2dcc1b 100644 --- a/config/examples/delta/FLSUN/Q5-nano_v1/Configuration.h +++ b/config/examples/delta/FLSUN/Q5-nano_v1/Configuration.h @@ -2138,8 +2138,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/delta/FLSUN/Q5-nano_v2/Configuration.h b/config/examples/delta/FLSUN/Q5-nano_v2/Configuration.h index ddfc809d6f..ba19966fde 100644 --- a/config/examples/delta/FLSUN/Q5-nano_v2/Configuration.h +++ b/config/examples/delta/FLSUN/Q5-nano_v2/Configuration.h @@ -2135,8 +2135,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/delta/FLSUN/QQ-S/Configuration.h b/config/examples/delta/FLSUN/QQ-S/Configuration.h index 4d772ea381..4743976a03 100644 --- a/config/examples/delta/FLSUN/QQ-S/Configuration.h +++ b/config/examples/delta/FLSUN/QQ-S/Configuration.h @@ -2136,8 +2136,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/delta/FLSUN/QQS-Pro/Configuration.h b/config/examples/delta/FLSUN/QQS-Pro/Configuration.h index 179c4571d5..95ce82a501 100644 --- a/config/examples/delta/FLSUN/QQS-Pro/Configuration.h +++ b/config/examples/delta/FLSUN/QQS-Pro/Configuration.h @@ -2136,8 +2136,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/delta/FLSUN/auto_calibrate/Configuration.h b/config/examples/delta/FLSUN/auto_calibrate/Configuration.h index da7a627c17..057fa77484 100644 --- a/config/examples/delta/FLSUN/auto_calibrate/Configuration.h +++ b/config/examples/delta/FLSUN/auto_calibrate/Configuration.h @@ -2139,8 +2139,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/delta/FLSUN/kossel/Configuration.h b/config/examples/delta/FLSUN/kossel/Configuration.h index e358ee85b8..9cd10ad36c 100644 --- a/config/examples/delta/FLSUN/kossel/Configuration.h +++ b/config/examples/delta/FLSUN/kossel/Configuration.h @@ -2138,8 +2138,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/delta/FLSUN/kossel_mini/Configuration.h b/config/examples/delta/FLSUN/kossel_mini/Configuration.h index c90e3ae159..3254f77a18 100644 --- a/config/examples/delta/FLSUN/kossel_mini/Configuration.h +++ b/config/examples/delta/FLSUN/kossel_mini/Configuration.h @@ -2138,8 +2138,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/delta/Geeetech/G2/Configuration.h b/config/examples/delta/Geeetech/G2/Configuration.h index 6319b5afc2..2bf2e8d759 100644 --- a/config/examples/delta/Geeetech/G2/Configuration.h +++ b/config/examples/delta/Geeetech/G2/Configuration.h @@ -2136,8 +2136,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points #define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/delta/Geeetech/G2Pro/Configuration.h b/config/examples/delta/Geeetech/G2Pro/Configuration.h index b8672f98d0..b73557179c 100644 --- a/config/examples/delta/Geeetech/G2Pro/Configuration.h +++ b/config/examples/delta/Geeetech/G2Pro/Configuration.h @@ -2136,8 +2136,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points #define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/delta/Geeetech/G2S/Configuration.h b/config/examples/delta/Geeetech/G2S/Configuration.h index 6eef07d4e6..5f398bc76c 100644 --- a/config/examples/delta/Geeetech/G2S/Configuration.h +++ b/config/examples/delta/Geeetech/G2S/Configuration.h @@ -2136,8 +2136,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points #define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/delta/Geeetech/G2SPro/Configuration.h b/config/examples/delta/Geeetech/G2SPro/Configuration.h index b3b3bfe762..bf59f204a2 100644 --- a/config/examples/delta/Geeetech/G2SPro/Configuration.h +++ b/config/examples/delta/Geeetech/G2SPro/Configuration.h @@ -2136,8 +2136,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points #define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/delta/Geeetech/Rostock 301/Configuration.h b/config/examples/delta/Geeetech/Rostock 301/Configuration.h index de05d8fbba..73920ed2b3 100644 --- a/config/examples/delta/Geeetech/Rostock 301/Configuration.h +++ b/config/examples/delta/Geeetech/Rostock 301/Configuration.h @@ -2136,8 +2136,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/delta/Hatchbox_Alpha/Configuration.h b/config/examples/delta/Hatchbox_Alpha/Configuration.h index 1dcb0de578..6dc38ef4da 100644 --- a/config/examples/delta/Hatchbox_Alpha/Configuration.h +++ b/config/examples/delta/Hatchbox_Alpha/Configuration.h @@ -2141,8 +2141,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/delta/MKS/SBASE/Configuration.h b/config/examples/delta/MKS/SBASE/Configuration.h index 5f9500913b..714c1be101 100644 --- a/config/examples/delta/MKS/SBASE/Configuration.h +++ b/config/examples/delta/MKS/SBASE/Configuration.h @@ -2136,8 +2136,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/delta/Malyan M300/Configuration.h b/config/examples/delta/Malyan M300/Configuration.h index 467f72cf22..6696aa5da0 100644 --- a/config/examples/delta/Malyan M300/Configuration.h +++ b/config/examples/delta/Malyan M300/Configuration.h @@ -2131,8 +2131,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/delta/Tevo Little Monster/Configuration.h b/config/examples/delta/Tevo Little Monster/Configuration.h index 4e00bac649..27c3c28133 100644 --- a/config/examples/delta/Tevo Little Monster/Configuration.h +++ b/config/examples/delta/Tevo Little Monster/Configuration.h @@ -2137,8 +2137,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/delta/Velleman/K8800/Configuration.h b/config/examples/delta/Velleman/K8800/Configuration.h index 457056dc8f..a5237b3619 100644 --- a/config/examples/delta/Velleman/K8800/Configuration.h +++ b/config/examples/delta/Velleman/K8800/Configuration.h @@ -2168,8 +2168,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/delta/generic/Configuration.h b/config/examples/delta/generic/Configuration.h index baf3f41948..fc698b3670 100644 --- a/config/examples/delta/generic/Configuration.h +++ b/config/examples/delta/generic/Configuration.h @@ -2136,8 +2136,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/delta/kossel_clear/Configuration.h b/config/examples/delta/kossel_clear/Configuration.h index c29b77b974..4a1532c40c 100644 --- a/config/examples/delta/kossel_clear/Configuration.h +++ b/config/examples/delta/kossel_clear/Configuration.h @@ -2137,8 +2137,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/delta/kossel_mini/Configuration.h b/config/examples/delta/kossel_mini/Configuration.h index 5a47d1cb5b..b6d4edaa33 100644 --- a/config/examples/delta/kossel_mini/Configuration.h +++ b/config/examples/delta/kossel_mini/Configuration.h @@ -2138,8 +2138,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/delta/kossel_pro/Configuration.h b/config/examples/delta/kossel_pro/Configuration.h index 605eb4d334..5b734222b5 100644 --- a/config/examples/delta/kossel_pro/Configuration.h +++ b/config/examples/delta/kossel_pro/Configuration.h @@ -2157,8 +2157,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/delta/kossel_xl/Configuration.h b/config/examples/delta/kossel_xl/Configuration.h index f1009bf263..0ea3abb091 100644 --- a/config/examples/delta/kossel_xl/Configuration.h +++ b/config/examples/delta/kossel_xl/Configuration.h @@ -2142,8 +2142,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/gCreate/gMax1.5+/Configuration.h b/config/examples/gCreate/gMax1.5+/Configuration.h index 108b22aba0..49b5a1e988 100644 --- a/config/examples/gCreate/gMax1.5+/Configuration.h +++ b/config/examples/gCreate/gMax1.5+/Configuration.h @@ -2136,8 +2136,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/linear_axes/Octopus 8 LINEAR_AXES/Configuration.h b/config/examples/linear_axes/Octopus 8 LINEAR_AXES/Configuration.h index 90385ed39e..f764d0a673 100644 --- a/config/examples/linear_axes/Octopus 8 LINEAR_AXES/Configuration.h +++ b/config/examples/linear_axes/Octopus 8 LINEAR_AXES/Configuration.h @@ -2140,8 +2140,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/linear_axes/RAMPS 5 LINEAR_AXES/Configuration.h b/config/examples/linear_axes/RAMPS 5 LINEAR_AXES/Configuration.h index 289259b5af..b8a1037d73 100644 --- a/config/examples/linear_axes/RAMPS 5 LINEAR_AXES/Configuration.h +++ b/config/examples/linear_axes/RAMPS 5 LINEAR_AXES/Configuration.h @@ -2115,8 +2115,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/makibox/Configuration.h b/config/examples/makibox/Configuration.h index 8a67842bef..5cf06a2fde 100644 --- a/config/examples/makibox/Configuration.h +++ b/config/examples/makibox/Configuration.h @@ -2131,8 +2131,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE) diff --git a/config/examples/tvrrug/Round2/Configuration.h b/config/examples/tvrrug/Round2/Configuration.h index 904cbb32fa..b4e9939025 100644 --- a/config/examples/tvrrug/Round2/Configuration.h +++ b/config/examples/tvrrug/Round2/Configuration.h @@ -2135,8 +2135,8 @@ #if ENABLED(LCD_BED_TRAMMING) #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points + #define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points //#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner //#define BED_TRAMMING_USE_PROBE #if ENABLED(BED_TRAMMING_USE_PROBE)