3D-printing/Configurations
1
0
Fork 0
mirror of https://github.com/MarlinFirmware/Configurations.git synced 2025-07-07 06:57:39 -06:00
Code Issues Projects Releases Packages Wiki Activity Actions

🚸 Update DGUS "Reloaded" set (#904)

Browse source
This commit is contained in:
Neo2003 2023-03-22 08:55:37 +01:00 • committed by GitHub
parent 6446b20214
commit 21ef229288
No known key found for this signature in database
GPG key ID: 4AEE18F83AFDEB23
3 changed files with 51 additions and 16 deletions
Download patch file Download diff file Expand all files Collapse all files

40
config/examples/Creality/Ender-5 Plus/CrealityV1/README.md
View file

@ -2,26 +2,34 @@
## Important ## Important
NOTE: The Ender-5 LCD stock firmware is only compatible with Creality firmware. The LCD standard UI will not function. This is expected. NOTE: The Ender-5 LCD stock firmware is only compatible with Creality firmware. The LCD standard UI will not function. This is expected. With the stock LCD firmware Marlin can only be controlled from a host over USB.
## Marlin DGUS UI Instructions ## Marlin DGUS UI "Reloaded" Instructions
The Ender-5 stock LCD can optionally use a [customized Marlin DGUS interface](https://github.com/coldtobi/Marlin_DGUS_Resources). With the stock LCD firmware Marlin can only be controlled from a host over USB. The Ender-5 stock LCD can optionally use a customized Marlin DGUS interface. To use `DGUS_LCD_UI RELOADED` the stock LCD must be flashed with custom firmware.
- Format an SD card using the FAT32 filesystem with 4K cluster size. ### Get the DWIN_SET
- Copy the `DWIN_SET` folder to the SD card.
- Power off the printer and disassemble the front panel to get access to the LCD board. - Download the `DWIN_SET` archive from https://github.com/MarlinFirmware/Configurations/raw/bugfix-2.1.x/config/examples/Creality/Ender-5%20Plus/DGUS-Reloaded/DWIN_SET.tar.gz
- Insert the SD card into the slot on the back of the LCD (not the main SD slot). - Extract the contents of the archive. You should now have a folder called `DWIN_SET`.
- Power on the printer. The screen will turn blue and display several messages, finishing with "SD Card Process... END!".
- Remove the microSD card and power cycle the printer. ### Prepare the SD Card
- Once it looks good reassemble the front panel. You may need to physically rotate the LCD by 180˚ for proper UI orientation.
- Format a Micro-SD card, selecting FAT32 for the file system and 4096 bytes sector size. These parameters are required for the procedure to work.
- Copy the `DWIN_SET` folder to the root of the Micro-SD card.
- Unmount and unplug your Micro-SD card.
### Flash the touchscreen
- Turn off and unplug your printer (both power and USB).
- You will need to access the Micro-SD slot on the back of the touchscreen (not the one that may be on your mainboard). If necessary, open the printer to access this slot.
- Insert the Micro-SD card into the screen SD slot.
- Plug the printer's power cable back in (but not the USB cable) and turn on the printer.
- After a few seconds the screen background will turn blue and the firmware flash will begin. _Do not cut power to the printer while the procedure is running!_
- When the procedure ends the screen will display a blue background with an END message on the first line and a summary.
- Turn off the printer. Remove the Micro-SD card from the touchscreen. Reassemble the printer if needed.
- The touch-screen firmware is now up-to-date.
## Restoring Factory Firmware ## Restoring Factory Firmware
The original firmware can be restored by downloading the [Ender 5 Plus firmware](https://www.creality.com/download) from Creality. You can follow the same LCD flashing procedure using the Creality-provided `DWIN_SET` folder. The original firmware can be restored by downloading the [Ender 5 Plus firmware](https://www.creality.com/download) from Creality. You can follow the same LCD flashing procedure using the Creality-provided `DWIN_SET` folder.
## Marlin DGUS UI Limitations
- The Information button (i) doesn't function.
- The Tools menu does not do anything at this time.
- If you press the Tools menu icon, enter another menu, then press "back" you will end up stuck at the Boot Screen. Touch anywhere on the screen to get back to the Status Screen.

BIN
config/examples/Creality/Ender-5 Plus/DGUS-Reloaded/DWIN_SET.tar.gz
View file

Binary file not shown.

27
config/examples/Creality/Ender-5 Plus/DGUS-Reloaded/README.md Normal file
View file

@ -0,0 +1,27 @@
# Ender-5 Plus Configurations for Marlin Firmware
## Marlin DGUS UI "Reloaded" Instructions
To use `DGUS_LCD_UI RELOADED` the stock LCD must be flashed with custom firmware.
### Get the DWIN_SET
- Download the `DWIN_SET` archive from https://github.com/MarlinFirmware/Configurations/raw/bugfix-2.1.x/config/examples/Creality/Ender-5%20Plus/DGUS-Reloaded/DWIN_SET.tar.gz
- Extract the contents of the archive. You should now have a folder called `DWIN_SET`.
### Prepare the SD Card
- Format a Micro-SD card, selecting FAT32 for the file system and 4096 bytes sector size. These parameters are required for the procedure to work.
- Copy the `DWIN_SET` folder to the root of the Micro-SD card.
- Unmount and unplug your Micro-SD card.
### Flash the touchscreen
- Turn off and unplug your printer (both power and USB).
- You will need to access the Micro-SD slot on the back of the touchscreen (not the one that may be on your mainboard). If necessary, open the printer to access this slot.
- Insert the Micro-SD card into the screen SD slot.
- Plug the printer's power cable back in (but not the USB cable) and turn on the printer.
- After a few seconds the screen background will turn blue and the firmware flash will begin. _Do not cut power to the printer while the procedure is running!_
- When the procedure ends the screen will display a blue background with an END message on the first line and a summary.
- Turn off the printer. Remove the Micro-SD card from the touchscreen. Reassemble the printer if needed.
- The touch-screen firmware is now up-to-date.