diff --git a/config/examples/Anet/ET4/Configuration.h b/config/examples/Anet/ET4/Configuration.h index ae4836dad9..0ff47713a8 100644 --- a/config/examples/Anet/ET4/Configuration.h +++ b/config/examples/Anet/ET4/Configuration.h @@ -498,7 +498,7 @@ //#define DEFAULT_Kp 40.00 //#define DEFAULT_Ki 0.70 //#define DEFAULT_Kd 50.00 - + // ET4 Autotune PID results #define DEFAULT_Kp 18.62 #define DEFAULT_Ki 1.38 diff --git a/config/examples/Anet/ET4/README.md b/config/examples/Anet/ET4/README.md index d397ac3c8d..57efcdd4b4 100644 --- a/config/examples/Anet/ET4/README.md +++ b/config/examples/Anet/ET4/README.md @@ -71,7 +71,7 @@ Report bugs to the [Issues section of my Marlin fork](https://github.com/davidtg - DRIVERS: TMC2208 (silent) / A4988 (noisy) - USB TO SERIAL CONVERTER: [CH340G](https://www.mpja.com/download/35227cpdata.pdf) - FLASH: [WINBOND W25Q128JVSQ](https://www.winbond.com/resource-files/w25q128jv%20revf%2003272018%20plus.pdf) (128M-bit) Serial Flash memory -- EEPROM: [AT24C04C](https://datasheet.lcsc.com/szlcsc/1809192313_Microchip-Tech-AT24C04C-SSHM-T_C6205.pdf) (ATMLH744 04CM) 4 Kb +- EEPROM: [AT24C04C](https://datasheet.lcsc.com/szlcsc/1809192313_Microchip-Tech-AT24C04C-SSHM-T_C6205.pdf) (ATMLH744 04CM) 4 Kb - LCD: [ST7789V](https://www.crystalfontz.com/controllers/- Sitronix/ST7789V/470/) | [STP320240_0280E2T](https://a.aliexpress.com/_dV4Bghv) (40P/1,5): ST7789 (YT280S008) - TOUCH: [XPT2046](https://ldm-systems.ru/f/doc/catalog/HY-TFT-2,8/XPT2046.pdf) - MOSFETS (BED/HOTEND): G90N04 diff --git a/config/examples/WASP/PowerWASP/README.md b/config/examples/WASP/PowerWASP/README.md index 9ae7646d36..82fcd5a1d4 100644 --- a/config/examples/WASP/PowerWASP/README.md +++ b/config/examples/WASP/PowerWASP/README.md @@ -29,44 +29,44 @@ USB and SDCARD Firmware flashing for the ARDUINO ATMEGA 2560 and ADK --------------------------------------------------------------------- The bootloader looks for byte in eeprom at address 0x3FF: - -if it is set to 0xF0 bootloader will look for a bin file on the sdcard named - firmware.bin and use it to flash the firmware then reset the byte to 0xFF so it - does this only once + -if it is set to 0xF0 bootloader will look for a bin file on the sdcard named + firmware.bin and use it to flash the firmware then reset the byte to 0xFF so it + does this only once - -otherwise no action is taken and bootloader works as a arduino bootloader except - some of the debugging functions are missing + -otherwise no action is taken and bootloader works as a arduino bootloader except + some of the debugging functions are missing Setup - ADAFruit micro sdcard 5V ready: + ADAFruit micro sdcard 5V ready: - SDCARD on ATMEGA 2560 or ADK + SDCARD on ATMEGA 2560 or ADK - pin 50 - DO + pin 50 - DO - pin 51 - DI + pin 51 - DI - pin 52 - CLK + pin 52 - CLK - pin 53 - CS + pin 53 - CS Generate BIN file for firmware update: To generate a bin file you need issue the following command on you apps elf executable: - avr-objcopy -I elf32-avr -O binary firmware.cpp.elf firmware.bin + avr-objcopy -I elf32-avr -O binary firmware.cpp.elf firmware.bin this generates firmware.bin which can be put on the sd for flashing your firmware. You can find the elf file in you apps build directory. Using olimex usb to upload bootloader: - avrdude -c stk500v2 -p m2560 -P /dev/tty.usbmodemfd131 -B 500 -e -u -U lock:w:0x3F:m -U efuse:w:0xFD:m -U hfuse:w:0xD8:m -U efuse:w:0xFF:m -F + avrdude -c stk500v2 -p m2560 -P /dev/tty.usbmodemfd131 -B 500 -e -u -U lock:w:0x3F:m -U efuse:w:0xFD:m -U hfuse:w:0xD8:m -U efuse:w:0xFF:m -F - avrdude -p m2560 -c stk500v2 -P /dev/tty.usbmodemfa131 -F -U flash:w:stk500boot.hex -b 115200 -B1 -U lock:w:0x0F:m + avrdude -p m2560 -c stk500v2 -P /dev/tty.usbmodemfa131 -F -U flash:w:stk500boot.hex -b 115200 -B1 -U lock:w:0x0F:m - avrdude -p m168 -c usbtiny -e -u -U lock:w:0x3f:m -U efuse:w:0x00:m -U hfuse:w:0xDD:m -U lfuse:w:0xFF:m + avrdude -p m168 -c usbtiny -e -u -U lock:w:0x3f:m -U efuse:w:0x00:m -U hfuse:w:0xDD:m -U lfuse:w:0xFF:m - avrdude -p m2560 -c stk500v2 -P /dev/tty.usbmodemfd131 -U flash:w:stk500boot_v2_mega2560.hex -U lock:w:0x0F:m -v - avrdude -c stk500v2 -p m2560 -P /dev/tty.usbmodemfd131 -U lock:w:0x3F:m -U efuse:w:0xFD:m -U hfuse:w:0xD8:m -U lfuse:w:0xFF:m -e -v + avrdude -p m2560 -c stk500v2 -P /dev/tty.usbmodemfd131 -U flash:w:stk500boot_v2_mega2560.hex -U lock:w:0x0F:m -v + avrdude -c stk500v2 -p m2560 -P /dev/tty.usbmodemfd131 -U lock:w:0x3F:m -U efuse:w:0xFD:m -U hfuse:w:0xD8:m -U lfuse:w:0xFF:m -e -v diff --git a/config/examples/delta/Anycubic/Predator/README.md b/config/examples/delta/Anycubic/Predator/README.md index c41aa08256..fa06405d8e 100644 --- a/config/examples/delta/Anycubic/Predator/README.md +++ b/config/examples/delta/Anycubic/Predator/README.md @@ -23,7 +23,7 @@ Use these example config files (adjusted to your needs) and build Marlin as usua Move jumper **SW1** to **USB**. - **JP1** is connected to the **BOOT0** pin which blocks programming. Remove the **JP1** jumper. - + ### 3. Get STM32 Flasher Download the _STM32 Flasher_ software at the ST Micro [download page](https://www.st.com/en/development-tools/flasher-stm32.html#get-software). Use _STM32 Flasher_ to flash your Marlin binary file to the board following the procedure shown in the video.