Add MAX31865 tuning options

config/default/Configuration.h

@@ -431,6 +431,12 @@
 #define DUMMY_THERMISTOR_998_VALUE 25
 #define DUMMY_THERMISTOR_999_VALUE 100
 
+// Resistor values when using a MAX31865 (sensor -5)
+// Sensor value is typically 100 (PT100) or 1000 (PT1000)
+// Calibration value is typically 430 ohm for AdaFruit PT100 modules and 4300 ohm for AdaFruit PT1000 modules.
+//#define MAX31865_SENSOR_OHMS      100
+//#define MAX31865_CALIBRATION_OHMS 430
+
 // Use temp sensor 1 as a redundant sensor with sensor 0. If the readings
 // from the two sensors differ too much the print will be aborted.
 //#define TEMP_SENSOR_1_AS_REDUNDANT

config/examples/3DFabXYZ/Migbot/Configuration.h

@@ -432,6 +432,12 @@
 #define DUMMY_THERMISTOR_998_VALUE 25
 #define DUMMY_THERMISTOR_999_VALUE 100
 
+// Resistor values when using a MAX31865 (sensor -5)
+// Sensor value is typically 100 (PT100) or 1000 (PT1000)
+// Calibration value is typically 430 ohm for AdaFruit PT100 modules and 4300 ohm for AdaFruit PT1000 modules.
+//#define MAX31865_SENSOR_OHMS      100
+//#define MAX31865_CALIBRATION_OHMS 430
+
 // Use temp sensor 1 as a redundant sensor with sensor 0. If the readings
 // from the two sensors differ too much the print will be aborted.
 //#define TEMP_SENSOR_1_AS_REDUNDANT

config/examples/ADIMLab/Gantry v1/Configuration.h

@@ -431,6 +431,12 @@
 #define DUMMY_THERMISTOR_998_VALUE 25
 #define DUMMY_THERMISTOR_999_VALUE 100
 
+// Resistor values when using a MAX31865 (sensor -5)
+// Sensor value is typically 100 (PT100) or 1000 (PT1000)
+// Calibration value is typically 430 ohm for AdaFruit PT100 modules and 4300 ohm for AdaFruit PT1000 modules.
+//#define MAX31865_SENSOR_OHMS      100
+//#define MAX31865_CALIBRATION_OHMS 430
+
 // Use temp sensor 1 as a redundant sensor with sensor 0. If the readings
 // from the two sensors differ too much the print will be aborted.
 //#define TEMP_SENSOR_1_AS_REDUNDANT

config/examples/ADIMLab/Gantry v2/Configuration.h

@@ -431,6 +431,12 @@
 #define DUMMY_THERMISTOR_998_VALUE 25
 #define DUMMY_THERMISTOR_999_VALUE 100
 
+// Resistor values when using a MAX31865 (sensor -5)
+// Sensor value is typically 100 (PT100) or 1000 (PT1000)
+// Calibration value is typically 430 ohm for AdaFruit PT100 modules and 4300 ohm for AdaFruit PT1000 modules.
+//#define MAX31865_SENSOR_OHMS      100
+//#define MAX31865_CALIBRATION_OHMS 430
+
 // Use temp sensor 1 as a redundant sensor with sensor 0. If the readings
 // from the two sensors differ too much the print will be aborted.
 //#define TEMP_SENSOR_1_AS_REDUNDANT

config/examples/AlephObjects/TAZ4/Configuration.h

@@ -431,6 +431,12 @@
 #define DUMMY_THERMISTOR_998_VALUE 25
 #define DUMMY_THERMISTOR_999_VALUE 100
 
+// Resistor values when using a MAX31865 (sensor -5)
+// Sensor value is typically 100 (PT100) or 1000 (PT1000)
+// Calibration value is typically 430 ohm for AdaFruit PT100 modules and 4300 ohm for AdaFruit PT1000 modules.
+//#define MAX31865_SENSOR_OHMS      100
+//#define MAX31865_CALIBRATION_OHMS 430
+
 // Use temp sensor 1 as a redundant sensor with sensor 0. If the readings
 // from the two sensors differ too much the print will be aborted.
 //#define TEMP_SENSOR_1_AS_REDUNDANT

config/examples/Alfawise/U20-bltouch/Configuration.h

@@ -469,6 +469,12 @@
 #define DUMMY_THERMISTOR_998_VALUE 25
 #define DUMMY_THERMISTOR_999_VALUE 100
 
+// Resistor values when using a MAX31865 (sensor -5)
+// Sensor value is typically 100 (PT100) or 1000 (PT1000)
+// Calibration value is typically 430 ohm for AdaFruit PT100 modules and 4300 ohm for AdaFruit PT1000 modules.
+//#define MAX31865_SENSOR_OHMS      100
+//#define MAX31865_CALIBRATION_OHMS 430
+
 // Use temp sensor 1 as a redundant sensor with sensor 0. If the readings
 // from the two sensors differ too much the print will be aborted.
 //#define TEMP_SENSOR_1_AS_REDUNDANT

config/examples/Alfawise/U20/Configuration.h

@@ -469,6 +469,12 @@
 #define DUMMY_THERMISTOR_998_VALUE 25
 #define DUMMY_THERMISTOR_999_VALUE 100
 
+// Resistor values when using a MAX31865 (sensor -5)
+// Sensor value is typically 100 (PT100) or 1000 (PT1000)
+// Calibration value is typically 430 ohm for AdaFruit PT100 modules and 4300 ohm for AdaFruit PT1000 modules.
+//#define MAX31865_SENSOR_OHMS      100
+//#define MAX31865_CALIBRATION_OHMS 430
+
 // Use temp sensor 1 as a redundant sensor with sensor 0. If the readings
 // from the two sensors differ too much the print will be aborted.
 //#define TEMP_SENSOR_1_AS_REDUNDANT

config/examples/AliExpress/CL-260/Configuration.h

@@ -431,6 +431,12 @@
 #define DUMMY_THERMISTOR_998_VALUE 25
 #define DUMMY_THERMISTOR_999_VALUE 100
 
+// Resistor values when using a MAX31865 (sensor -5)
+// Sensor value is typically 100 (PT100) or 1000 (PT1000)
+// Calibration value is typically 430 ohm for AdaFruit PT100 modules and 4300 ohm for AdaFruit PT1000 modules.
+//#define MAX31865_SENSOR_OHMS      100
+//#define MAX31865_CALIBRATION_OHMS 430
+
 // Use temp sensor 1 as a redundant sensor with sensor 0. If the readings
 // from the two sensors differ too much the print will be aborted.
 //#define TEMP_SENSOR_1_AS_REDUNDANT

config/examples/AliExpress/UM2pExt/Configuration.h

@@ -431,6 +431,12 @@
 #define DUMMY_THERMISTOR_998_VALUE 25
 #define DUMMY_THERMISTOR_999_VALUE 100
 
+// Resistor values when using a MAX31865 (sensor -5)
+// Sensor value is typically 100 (PT100) or 1000 (PT1000)
+// Calibration value is typically 430 ohm for AdaFruit PT100 modules and 4300 ohm for AdaFruit PT1000 modules.
+//#define MAX31865_SENSOR_OHMS      100
+//#define MAX31865_CALIBRATION_OHMS 430
+
 // Use temp sensor 1 as a redundant sensor with sensor 0. If the readings
 // from the two sensors differ too much the print will be aborted.
 //#define TEMP_SENSOR_1_AS_REDUNDANT

config/examples/Anet/A2/Configuration.h

@@ -431,6 +431,12 @@
 #define DUMMY_THERMISTOR_998_VALUE 25
 #define DUMMY_THERMISTOR_999_VALUE 100
 
+// Resistor values when using a MAX31865 (sensor -5)
+// Sensor value is typically 100 (PT100) or 1000 (PT1000)
+// Calibration value is typically 430 ohm for AdaFruit PT100 modules and 4300 ohm for AdaFruit PT1000 modules.
+//#define MAX31865_SENSOR_OHMS      100
+//#define MAX31865_CALIBRATION_OHMS 430
+
 // Use temp sensor 1 as a redundant sensor with sensor 0. If the readings
 // from the two sensors differ too much the print will be aborted.
 //#define TEMP_SENSOR_1_AS_REDUNDANT

config/examples/Anet/A2plus/Configuration.h

@@ -431,6 +431,12 @@
 #define DUMMY_THERMISTOR_998_VALUE 25
 #define DUMMY_THERMISTOR_999_VALUE 100
 
+// Resistor values when using a MAX31865 (sensor -5)
+// Sensor value is typically 100 (PT100) or 1000 (PT1000)
+// Calibration value is typically 430 ohm for AdaFruit PT100 modules and 4300 ohm for AdaFruit PT1000 modules.
+//#define MAX31865_SENSOR_OHMS      100
+//#define MAX31865_CALIBRATION_OHMS 430
+
 // Use temp sensor 1 as a redundant sensor with sensor 0. If the readings
 // from the two sensors differ too much the print will be aborted.
 //#define TEMP_SENSOR_1_AS_REDUNDANT

config/examples/Anet/A6/Configuration.h

@@ -431,6 +431,12 @@
 #define DUMMY_THERMISTOR_998_VALUE 25
 #define DUMMY_THERMISTOR_999_VALUE 100
 
+// Resistor values when using a MAX31865 (sensor -5)
+// Sensor value is typically 100 (PT100) or 1000 (PT1000)
+// Calibration value is typically 430 ohm for AdaFruit PT100 modules and 4300 ohm for AdaFruit PT1000 modules.
+//#define MAX31865_SENSOR_OHMS      100
+//#define MAX31865_CALIBRATION_OHMS 430
+
 // Use temp sensor 1 as a redundant sensor with sensor 0. If the readings
 // from the two sensors differ too much the print will be aborted.
 //#define TEMP_SENSOR_1_AS_REDUNDANT

config/examples/Anet/A8/Configuration.h

@@ -432,6 +432,12 @@
 #define DUMMY_THERMISTOR_998_VALUE 25
 #define DUMMY_THERMISTOR_999_VALUE 100
 
+// Resistor values when using a MAX31865 (sensor -5)
+// Sensor value is typically 100 (PT100) or 1000 (PT1000)
+// Calibration value is typically 430 ohm for AdaFruit PT100 modules and 4300 ohm for AdaFruit PT1000 modules.
+//#define MAX31865_SENSOR_OHMS      100
+//#define MAX31865_CALIBRATION_OHMS 430
+
 // Use temp sensor 1 as a redundant sensor with sensor 0. If the readings
 // from the two sensors differ too much the print will be aborted.
 //#define TEMP_SENSOR_1_AS_REDUNDANT

config/examples/Anet/A8plus/Configuration.h

@@ -432,6 +432,12 @@
 #define DUMMY_THERMISTOR_998_VALUE 25
 #define DUMMY_THERMISTOR_999_VALUE 100
 
+// Resistor values when using a MAX31865 (sensor -5)
+// Sensor value is typically 100 (PT100) or 1000 (PT1000)
+// Calibration value is typically 430 ohm for AdaFruit PT100 modules and 4300 ohm for AdaFruit PT1000 modules.
+//#define MAX31865_SENSOR_OHMS      100
+//#define MAX31865_CALIBRATION_OHMS 430
+
 // Use temp sensor 1 as a redundant sensor with sensor 0. If the readings
 // from the two sensors differ too much the print will be aborted.
 //#define TEMP_SENSOR_1_AS_REDUNDANT

config/examples/Anet/E10/Configuration.h

@@ -431,6 +431,12 @@
 #define DUMMY_THERMISTOR_998_VALUE 25
 #define DUMMY_THERMISTOR_999_VALUE 100
 
+// Resistor values when using a MAX31865 (sensor -5)
+// Sensor value is typically 100 (PT100) or 1000 (PT1000)
+// Calibration value is typically 430 ohm for AdaFruit PT100 modules and 4300 ohm for AdaFruit PT1000 modules.
+//#define MAX31865_SENSOR_OHMS      100
+//#define MAX31865_CALIBRATION_OHMS 430
+
 // Use temp sensor 1 as a redundant sensor with sensor 0. If the readings
 // from the two sensors differ too much the print will be aborted.
 //#define TEMP_SENSOR_1_AS_REDUNDANT

config/examples/Anet/E16/Configuration.h

@@ -431,6 +431,12 @@
 #define DUMMY_THERMISTOR_998_VALUE 25
 #define DUMMY_THERMISTOR_999_VALUE 100
 
+// Resistor values when using a MAX31865 (sensor -5)
+// Sensor value is typically 100 (PT100) or 1000 (PT1000)
+// Calibration value is typically 430 ohm for AdaFruit PT100 modules and 4300 ohm for AdaFruit PT1000 modules.
+//#define MAX31865_SENSOR_OHMS      100
+//#define MAX31865_CALIBRATION_OHMS 430
+
 // Use temp sensor 1 as a redundant sensor with sensor 0. If the readings
 // from the two sensors differ too much the print will be aborted.
 //#define TEMP_SENSOR_1_AS_REDUNDANT

config/examples/Anet/ET4/Configuration.h

@@ -431,6 +431,12 @@
 #define DUMMY_THERMISTOR_998_VALUE 25
 #define DUMMY_THERMISTOR_999_VALUE 100
 
+// Resistor values when using a MAX31865 (sensor -5)
+// Sensor value is typically 100 (PT100) or 1000 (PT1000)
+// Calibration value is typically 430 ohm for AdaFruit PT100 modules and 4300 ohm for AdaFruit PT1000 modules.
+//#define MAX31865_SENSOR_OHMS      100
+//#define MAX31865_CALIBRATION_OHMS 430
+
 // Use temp sensor 1 as a redundant sensor with sensor 0. If the readings
 // from the two sensors differ too much the print will be aborted.
 //#define TEMP_SENSOR_1_AS_REDUNDANT

config/examples/AnyCubic/Chiron/Configuration.h

@@ -435,6 +435,12 @@
 #define DUMMY_THERMISTOR_998_VALUE 25
 #define DUMMY_THERMISTOR_999_VALUE 100
 
+// Resistor values when using a MAX31865 (sensor -5)
+// Sensor value is typically 100 (PT100) or 1000 (PT1000)
+// Calibration value is typically 430 ohm for AdaFruit PT100 modules and 4300 ohm for AdaFruit PT1000 modules.
+//#define MAX31865_SENSOR_OHMS      100
+//#define MAX31865_CALIBRATION_OHMS 430
+
 // Use temp sensor 1 as a redundant sensor with sensor 0. If the readings
 // from the two sensors differ too much the print will be aborted.
 //#define TEMP_SENSOR_1_AS_REDUNDANT

config/examples/AnyCubic/Mega Zero/Configuration.h

@@ -432,6 +432,12 @@
 #define DUMMY_THERMISTOR_998_VALUE 25
 #define DUMMY_THERMISTOR_999_VALUE 100
 
+// Resistor values when using a MAX31865 (sensor -5)
+// Sensor value is typically 100 (PT100) or 1000 (PT1000)
+// Calibration value is typically 430 ohm for AdaFruit PT100 modules and 4300 ohm for AdaFruit PT1000 modules.
+//#define MAX31865_SENSOR_OHMS      100
+//#define MAX31865_CALIBRATION_OHMS 430
+
 // Use temp sensor 1 as a redundant sensor with sensor 0. If the readings
 // from the two sensors differ too much the print will be aborted.
 //#define TEMP_SENSOR_1_AS_REDUNDANT

config/examples/AnyCubic/i3 Mega/Configuration.h

@@ -436,6 +436,12 @@
 #define DUMMY_THERMISTOR_998_VALUE 25
 #define DUMMY_THERMISTOR_999_VALUE 100
 
+// Resistor values when using a MAX31865 (sensor -5)
+// Sensor value is typically 100 (PT100) or 1000 (PT1000)
+// Calibration value is typically 430 ohm for AdaFruit PT100 modules and 4300 ohm for AdaFruit PT1000 modules.
+//#define MAX31865_SENSOR_OHMS      100
+//#define MAX31865_CALIBRATION_OHMS 430
+
 // Use temp sensor 1 as a redundant sensor with sensor 0. If the readings
 // from the two sensors differ too much the print will be aborted.
 //#define TEMP_SENSOR_1_AS_REDUNDANT

config/examples/AnyCubic/i3/Configuration.h

@@ -431,6 +431,12 @@
 #define DUMMY_THERMISTOR_998_VALUE 25
 #define DUMMY_THERMISTOR_999_VALUE 100
 
+// Resistor values when using a MAX31865 (sensor -5)
+// Sensor value is typically 100 (PT100) or 1000 (PT1000)
+// Calibration value is typically 430 ohm for AdaFruit PT100 modules and 4300 ohm for AdaFruit PT1000 modules.
+//#define MAX31865_SENSOR_OHMS      100
+//#define MAX31865_CALIBRATION_OHMS 430
+
 // Use temp sensor 1 as a redundant sensor with sensor 0. If the readings
 // from the two sensors differ too much the print will be aborted.
 //#define TEMP_SENSOR_1_AS_REDUNDANT

config/examples/ArmEd/Configuration.h

@@ -431,6 +431,12 @@
 #define DUMMY_THERMISTOR_998_VALUE 25
 #define DUMMY_THERMISTOR_999_VALUE 100
 
+// Resistor values when using a MAX31865 (sensor -5)
+// Sensor value is typically 100 (PT100) or 1000 (PT1000)
+// Calibration value is typically 430 ohm for AdaFruit PT100 modules and 4300 ohm for AdaFruit PT1000 modules.
+//#define MAX31865_SENSOR_OHMS      100
+//#define MAX31865_CALIBRATION_OHMS 430
+
 // Use temp sensor 1 as a redundant sensor with sensor 0. If the readings
 // from the two sensors differ too much the print will be aborted.
 //#define TEMP_SENSOR_1_AS_REDUNDANT

config/examples/Artillery/Genius/Configuration.h

@@ -431,6 +431,12 @@
 #define DUMMY_THERMISTOR_998_VALUE 25
 #define DUMMY_THERMISTOR_999_VALUE 100
 
+// Resistor values when using a MAX31865 (sensor -5)
+// Sensor value is typically 100 (PT100) or 1000 (PT1000)
+// Calibration value is typically 430 ohm for AdaFruit PT100 modules and 4300 ohm for AdaFruit PT1000 modules.
+//#define MAX31865_SENSOR_OHMS      100
+//#define MAX31865_CALIBRATION_OHMS 430
+
 // Use temp sensor 1 as a redundant sensor with sensor 0. If the readings
 // from the two sensors differ too much the print will be aborted.
 //#define TEMP_SENSOR_1_AS_REDUNDANT

config/examples/Artillery/Sidewinder X1/Configuration.h

@@ -431,6 +431,12 @@
 #define DUMMY_THERMISTOR_998_VALUE 25
 #define DUMMY_THERMISTOR_999_VALUE 100
 
+// Resistor values when using a MAX31865 (sensor -5)
+// Sensor value is typically 100 (PT100) or 1000 (PT1000)
+// Calibration value is typically 430 ohm for AdaFruit PT100 modules and 4300 ohm for AdaFruit PT1000 modules.
+//#define MAX31865_SENSOR_OHMS      100
+//#define MAX31865_CALIBRATION_OHMS 430
+
 // Use temp sensor 1 as a redundant sensor with sensor 0. If the readings
 // from the two sensors differ too much the print will be aborted.
 //#define TEMP_SENSOR_1_AS_REDUNDANT

config/examples/Artillery/Sidewinder X1_0.9_degree_BMG_E3D_V6/Configuration.h

@@ -431,6 +431,12 @@
 #define DUMMY_THERMISTOR_998_VALUE 25
 #define DUMMY_THERMISTOR_999_VALUE 100
 
+// Resistor values when using a MAX31865 (sensor -5)
+// Sensor value is typically 100 (PT100) or 1000 (PT1000)
+// Calibration value is typically 430 ohm for AdaFruit PT100 modules and 4300 ohm for AdaFruit PT1000 modules.
+//#define MAX31865_SENSOR_OHMS      100
+//#define MAX31865_CALIBRATION_OHMS 430
+
 // Use temp sensor 1 as a redundant sensor with sensor 0. If the readings
 // from the two sensors differ too much the print will be aborted.
 //#define TEMP_SENSOR_1_AS_REDUNDANT

config/examples/Azteeg/X5GT/Configuration.h

@@ -431,6 +431,12 @@
 #define DUMMY_THERMISTOR_998_VALUE 25
 #define DUMMY_THERMISTOR_999_VALUE 100
 
+// Resistor values when using a MAX31865 (sensor -5)
+// Sensor value is typically 100 (PT100) or 1000 (PT1000)
+// Calibration value is typically 430 ohm for AdaFruit PT100 modules and 4300 ohm for AdaFruit PT1000 modules.
+//#define MAX31865_SENSOR_OHMS      100
+//#define MAX31865_CALIBRATION_OHMS 430
+
 // Use temp sensor 1 as a redundant sensor with sensor 0. If the readings
 // from the two sensors differ too much the print will be aborted.
 //#define TEMP_SENSOR_1_AS_REDUNDANT

config/examples/BIBO/TouchX/cyclops/Configuration.h

@@ -431,6 +431,12 @@
 #define DUMMY_THERMISTOR_998_VALUE 25
 #define DUMMY_THERMISTOR_999_VALUE 100
 
+// Resistor values when using a MAX31865 (sensor -5)
+// Sensor value is typically 100 (PT100) or 1000 (PT1000)
+// Calibration value is typically 430 ohm for AdaFruit PT100 modules and 4300 ohm for AdaFruit PT1000 modules.
+//#define MAX31865_SENSOR_OHMS      100
+//#define MAX31865_CALIBRATION_OHMS 430
+
 // Use temp sensor 1 as a redundant sensor with sensor 0. If the readings
 // from the two sensors differ too much the print will be aborted.
 //#define TEMP_SENSOR_1_AS_REDUNDANT

config/examples/BIBO/TouchX/default/Configuration.h

@@ -431,6 +431,12 @@
 #define DUMMY_THERMISTOR_998_VALUE 25
 #define DUMMY_THERMISTOR_999_VALUE 100
 
+// Resistor values when using a MAX31865 (sensor -5)
+// Sensor value is typically 100 (PT100) or 1000 (PT1000)
+// Calibration value is typically 430 ohm for AdaFruit PT100 modules and 4300 ohm for AdaFruit PT1000 modules.
+//#define MAX31865_SENSOR_OHMS      100
+//#define MAX31865_CALIBRATION_OHMS 430
+
 // Use temp sensor 1 as a redundant sensor with sensor 0. If the readings
 // from the two sensors differ too much the print will be aborted.
 //#define TEMP_SENSOR_1_AS_REDUNDANT

config/examples/BIQU/B1-BLTouch/Configuration.h

@@ -431,6 +431,12 @@
 #define DUMMY_THERMISTOR_998_VALUE 25
 #define DUMMY_THERMISTOR_999_VALUE 100
 
+// Resistor values when using a MAX31865 (sensor -5)
+// Sensor value is typically 100 (PT100) or 1000 (PT1000)
+// Calibration value is typically 430 ohm for AdaFruit PT100 modules and 4300 ohm for AdaFruit PT1000 modules.
+//#define MAX31865_SENSOR_OHMS      100
+//#define MAX31865_CALIBRATION_OHMS 430
+
 // Use temp sensor 1 as a redundant sensor with sensor 0. If the readings
 // from the two sensors differ too much the print will be aborted.
 //#define TEMP_SENSOR_1_AS_REDUNDANT

config/examples/BIQU/B1/Configuration.h

@@ -431,6 +431,12 @@
 #define DUMMY_THERMISTOR_998_VALUE 25
 #define DUMMY_THERMISTOR_999_VALUE 100
 
+// Resistor values when using a MAX31865 (sensor -5)
+// Sensor value is typically 100 (PT100) or 1000 (PT1000)
+// Calibration value is typically 430 ohm for AdaFruit PT100 modules and 4300 ohm for AdaFruit PT1000 modules.
+//#define MAX31865_SENSOR_OHMS      100
+//#define MAX31865_CALIBRATION_OHMS 430
+
 // Use temp sensor 1 as a redundant sensor with sensor 0. If the readings
 // from the two sensors differ too much the print will be aborted.
 //#define TEMP_SENSOR_1_AS_REDUNDANT

config/examples/BQ/Hephestos/Configuration.h

@@ -431,6 +431,12 @@
 #define DUMMY_THERMISTOR_998_VALUE 25
 #define DUMMY_THERMISTOR_999_VALUE 100
 
+// Resistor values when using a MAX31865 (sensor -5)
+// Sensor value is typically 100 (PT100) or 1000 (PT1000)
+// Calibration value is typically 430 ohm for AdaFruit PT100 modules and 4300 ohm for AdaFruit PT1000 modules.
+//#define MAX31865_SENSOR_OHMS      100
+//#define MAX31865_CALIBRATION_OHMS 430
+
 // Use temp sensor 1 as a redundant sensor with sensor 0. If the readings
 // from the two sensors differ too much the print will be aborted.
 //#define TEMP_SENSOR_1_AS_REDUNDANT

config/examples/BQ/Hephestos_2/Configuration.h

@@ -439,6 +439,12 @@
 #define DUMMY_THERMISTOR_998_VALUE 25
 #define DUMMY_THERMISTOR_999_VALUE 100
 
+// Resistor values when using a MAX31865 (sensor -5)
+// Sensor value is typically 100 (PT100) or 1000 (PT1000)
+// Calibration value is typically 430 ohm for AdaFruit PT100 modules and 4300 ohm for AdaFruit PT1000 modules.
+//#define MAX31865_SENSOR_OHMS      100
+//#define MAX31865_CALIBRATION_OHMS 430
+
 // Use temp sensor 1 as a redundant sensor with sensor 0. If the readings
 // from the two sensors differ too much the print will be aborted.
 //#define TEMP_SENSOR_1_AS_REDUNDANT

config/examples/BQ/WITBOX/Configuration.h

@@ -431,6 +431,12 @@
 #define DUMMY_THERMISTOR_998_VALUE 25
 #define DUMMY_THERMISTOR_999_VALUE 100
 
+// Resistor values when using a MAX31865 (sensor -5)
+// Sensor value is typically 100 (PT100) or 1000 (PT1000)
+// Calibration value is typically 430 ohm for AdaFruit PT100 modules and 4300 ohm for AdaFruit PT1000 modules.
+//#define MAX31865_SENSOR_OHMS      100
+//#define MAX31865_CALIBRATION_OHMS 430
+
 // Use temp sensor 1 as a redundant sensor with sensor 0. If the readings
 // from the two sensors differ too much the print will be aborted.
 //#define TEMP_SENSOR_1_AS_REDUNDANT

config/examples/CTC/i3 2560 Rev A/no probe/Configuration.h

@@ -431,6 +431,12 @@
 #define DUMMY_THERMISTOR_998_VALUE 25
 #define DUMMY_THERMISTOR_999_VALUE 100
 
+// Resistor values when using a MAX31865 (sensor -5)
+// Sensor value is typically 100 (PT100) or 1000 (PT1000)
+// Calibration value is typically 430 ohm for AdaFruit PT100 modules and 4300 ohm for AdaFruit PT1000 modules.
+//#define MAX31865_SENSOR_OHMS      100
+//#define MAX31865_CALIBRATION_OHMS 430
+
 // Use temp sensor 1 as a redundant sensor with sensor 0. If the readings
 // from the two sensors differ too much the print will be aborted.
 //#define TEMP_SENSOR_1_AS_REDUNDANT

config/examples/Cartesio/Configuration.h

@@ -432,6 +432,12 @@
 #define DUMMY_THERMISTOR_998_VALUE 25
 #define DUMMY_THERMISTOR_999_VALUE 100
 
+// Resistor values when using a MAX31865 (sensor -5)
+// Sensor value is typically 100 (PT100) or 1000 (PT1000)
+// Calibration value is typically 430 ohm for AdaFruit PT100 modules and 4300 ohm for AdaFruit PT1000 modules.
+//#define MAX31865_SENSOR_OHMS      100
+//#define MAX31865_CALIBRATION_OHMS 430
+
 // Use temp sensor 1 as a redundant sensor with sensor 0. If the readings
 // from the two sensors differ too much the print will be aborted.
 //#define TEMP_SENSOR_1_AS_REDUNDANT

config/examples/Copymaster3D/300/Configuration.h

@@ -431,6 +431,12 @@
 #define DUMMY_THERMISTOR_998_VALUE 25
 #define DUMMY_THERMISTOR_999_VALUE 100
 
+// Resistor values when using a MAX31865 (sensor -5)
+// Sensor value is typically 100 (PT100) or 1000 (PT1000)
+// Calibration value is typically 430 ohm for AdaFruit PT100 modules and 4300 ohm for AdaFruit PT1000 modules.
+//#define MAX31865_SENSOR_OHMS      100
+//#define MAX31865_CALIBRATION_OHMS 430
+
 // Use temp sensor 1 as a redundant sensor with sensor 0. If the readings
 // from the two sensors differ too much the print will be aborted.
 //#define TEMP_SENSOR_1_AS_REDUNDANT

config/examples/Copymaster3D/400/Configuration.h

@@ -431,6 +431,12 @@
 #define DUMMY_THERMISTOR_998_VALUE 25
 #define DUMMY_THERMISTOR_999_VALUE 100
 
+// Resistor values when using a MAX31865 (sensor -5)
+// Sensor value is typically 100 (PT100) or 1000 (PT1000)
+// Calibration value is typically 430 ohm for AdaFruit PT100 modules and 4300 ohm for AdaFruit PT1000 modules.
+//#define MAX31865_SENSOR_OHMS      100
+//#define MAX31865_CALIBRATION_OHMS 430
+
 // Use temp sensor 1 as a redundant sensor with sensor 0. If the readings
 // from the two sensors differ too much the print will be aborted.
 //#define TEMP_SENSOR_1_AS_REDUNDANT

config/examples/Copymaster3D/500/Configuration.h

@@ -431,6 +431,12 @@
 #define DUMMY_THERMISTOR_998_VALUE 25
 #define DUMMY_THERMISTOR_999_VALUE 100
 
+// Resistor values when using a MAX31865 (sensor -5)
+// Sensor value is typically 100 (PT100) or 1000 (PT1000)
+// Calibration value is typically 430 ohm for AdaFruit PT100 modules and 4300 ohm for AdaFruit PT1000 modules.
+//#define MAX31865_SENSOR_OHMS      100
+//#define MAX31865_CALIBRATION_OHMS 430
+
 // Use temp sensor 1 as a redundant sensor with sensor 0. If the readings
 // from the two sensors differ too much the print will be aborted.
 //#define TEMP_SENSOR_1_AS_REDUNDANT

config/examples/Creality/CR-10 Mini/CrealityV1/Configuration.h

@@ -440,6 +440,12 @@
 #define DUMMY_THERMISTOR_998_VALUE 25
 #define DUMMY_THERMISTOR_999_VALUE 100
 
+// Resistor values when using a MAX31865 (sensor -5)
+// Sensor value is typically 100 (PT100) or 1000 (PT1000)
+// Calibration value is typically 430 ohm for AdaFruit PT100 modules and 4300 ohm for AdaFruit PT1000 modules.
+//#define MAX31865_SENSOR_OHMS      100
+//#define MAX31865_CALIBRATION_OHMS 430
+
 // Use temp sensor 1 as a redundant sensor with sensor 0. If the readings
 // from the two sensors differ too much the print will be aborted.
 //#define TEMP_SENSOR_1_AS_REDUNDANT

config/examples/Creality/CR-10 Mini/MEEB-3DP/Configuration.h

@@ -431,6 +431,12 @@
 #define DUMMY_THERMISTOR_998_VALUE 25
 #define DUMMY_THERMISTOR_999_VALUE 100
 
+// Resistor values when using a MAX31865 (sensor -5)
+// Sensor value is typically 100 (PT100) or 1000 (PT1000)
+// Calibration value is typically 430 ohm for AdaFruit PT100 modules and 4300 ohm for AdaFruit PT1000 modules.
+//#define MAX31865_SENSOR_OHMS      100
+//#define MAX31865_CALIBRATION_OHMS 430
+
 // Use temp sensor 1 as a redundant sensor with sensor 0. If the readings
 // from the two sensors differ too much the print will be aborted.
 //#define TEMP_SENSOR_1_AS_REDUNDANT

config/examples/Creality/CR-10 S4/CrealityV1/Configuration.h

@@ -431,6 +431,12 @@
 #define DUMMY_THERMISTOR_998_VALUE 25
 #define DUMMY_THERMISTOR_999_VALUE 100
 
+// Resistor values when using a MAX31865 (sensor -5)
+// Sensor value is typically 100 (PT100) or 1000 (PT1000)
+// Calibration value is typically 430 ohm for AdaFruit PT100 modules and 4300 ohm for AdaFruit PT1000 modules.
+//#define MAX31865_SENSOR_OHMS      100
+//#define MAX31865_CALIBRATION_OHMS 430
+
 // Use temp sensor 1 as a redundant sensor with sensor 0. If the readings
 // from the two sensors differ too much the print will be aborted.
 //#define TEMP_SENSOR_1_AS_REDUNDANT

config/examples/Creality/CR-10 S5/CrealityV1/Configuration.h

@@ -431,6 +431,12 @@
 #define DUMMY_THERMISTOR_998_VALUE 25
 #define DUMMY_THERMISTOR_999_VALUE 100
 
+// Resistor values when using a MAX31865 (sensor -5)
+// Sensor value is typically 100 (PT100) or 1000 (PT1000)
+// Calibration value is typically 430 ohm for AdaFruit PT100 modules and 4300 ohm for AdaFruit PT1000 modules.
+//#define MAX31865_SENSOR_OHMS      100
+//#define MAX31865_CALIBRATION_OHMS 430
+
 // Use temp sensor 1 as a redundant sensor with sensor 0. If the readings
 // from the two sensors differ too much the print will be aborted.
 //#define TEMP_SENSOR_1_AS_REDUNDANT

config/examples/Creality/CR-10 V2/Configuration.h

@@ -438,6 +438,12 @@
 #define DUMMY_THERMISTOR_998_VALUE 25
 #define DUMMY_THERMISTOR_999_VALUE 100
 
+// Resistor values when using a MAX31865 (sensor -5)
+// Sensor value is typically 100 (PT100) or 1000 (PT1000)
+// Calibration value is typically 430 ohm for AdaFruit PT100 modules and 4300 ohm for AdaFruit PT1000 modules.
+//#define MAX31865_SENSOR_OHMS      100
+//#define MAX31865_CALIBRATION_OHMS 430
+
 // Use temp sensor 1 as a redundant sensor with sensor 0. If the readings
 // from the two sensors differ too much the print will be aborted.
 //#define TEMP_SENSOR_1_AS_REDUNDANT

config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 2.0/Configuration.h

@@ -431,6 +431,12 @@
 #define DUMMY_THERMISTOR_998_VALUE 25
 #define DUMMY_THERMISTOR_999_VALUE 100
 
+// Resistor values when using a MAX31865 (sensor -5)
+// Sensor value is typically 100 (PT100) or 1000 (PT1000)
+// Calibration value is typically 430 ohm for AdaFruit PT100 modules and 4300 ohm for AdaFruit PT1000 modules.
+//#define MAX31865_SENSOR_OHMS      100
+//#define MAX31865_CALIBRATION_OHMS 430
+
 // Use temp sensor 1 as a redundant sensor with sensor 0. If the readings
 // from the two sensors differ too much the print will be aborted.
 //#define TEMP_SENSOR_1_AS_REDUNDANT

config/examples/Creality/CR-10/CrealityV1/Configuration.h

@@ -431,6 +431,12 @@
 #define DUMMY_THERMISTOR_998_VALUE 25
 #define DUMMY_THERMISTOR_999_VALUE 100
 
+// Resistor values when using a MAX31865 (sensor -5)
+// Sensor value is typically 100 (PT100) or 1000 (PT1000)
+// Calibration value is typically 430 ohm for AdaFruit PT100 modules and 4300 ohm for AdaFruit PT1000 modules.
+//#define MAX31865_SENSOR_OHMS      100
+//#define MAX31865_CALIBRATION_OHMS 430
+
 // Use temp sensor 1 as a redundant sensor with sensor 0. If the readings
 // from the two sensors differ too much the print will be aborted.
 //#define TEMP_SENSOR_1_AS_REDUNDANT

config/examples/Creality/CR-10S/BigTreeTech SKR Mini E3 2.0/Configuration.h

@@ -431,6 +431,12 @@
 #define DUMMY_THERMISTOR_998_VALUE 25
 #define DUMMY_THERMISTOR_999_VALUE 100
 
+// Resistor values when using a MAX31865 (sensor -5)
+// Sensor value is typically 100 (PT100) or 1000 (PT1000)
+// Calibration value is typically 430 ohm for AdaFruit PT100 modules and 4300 ohm for AdaFruit PT1000 modules.
+//#define MAX31865_SENSOR_OHMS      100
+//#define MAX31865_CALIBRATION_OHMS 430
+
 // Use temp sensor 1 as a redundant sensor with sensor 0. If the readings
 // from the two sensors differ too much the print will be aborted.
 //#define TEMP_SENSOR_1_AS_REDUNDANT

config/examples/Creality/CR-10S/CrealityV1/Configuration.h

@@ -431,6 +431,12 @@
 #define DUMMY_THERMISTOR_998_VALUE 25
 #define DUMMY_THERMISTOR_999_VALUE 100
 
+// Resistor values when using a MAX31865 (sensor -5)
+// Sensor value is typically 100 (PT100) or 1000 (PT1000)
+// Calibration value is typically 430 ohm for AdaFruit PT100 modules and 4300 ohm for AdaFruit PT1000 modules.
+//#define MAX31865_SENSOR_OHMS      100
+//#define MAX31865_CALIBRATION_OHMS 430
+
 // Use temp sensor 1 as a redundant sensor with sensor 0. If the readings
 // from the two sensors differ too much the print will be aborted.
 //#define TEMP_SENSOR_1_AS_REDUNDANT

config/examples/Creality/CR-20 Pro/Configuration.h

@@ -431,6 +431,12 @@
 #define DUMMY_THERMISTOR_998_VALUE 25
 #define DUMMY_THERMISTOR_999_VALUE 100
 
+// Resistor values when using a MAX31865 (sensor -5)
+// Sensor value is typically 100 (PT100) or 1000 (PT1000)
+// Calibration value is typically 430 ohm for AdaFruit PT100 modules and 4300 ohm for AdaFruit PT1000 modules.
+//#define MAX31865_SENSOR_OHMS      100
+//#define MAX31865_CALIBRATION_OHMS 430
+
 // Use temp sensor 1 as a redundant sensor with sensor 0. If the readings
 // from the two sensors differ too much the print will be aborted.
 //#define TEMP_SENSOR_1_AS_REDUNDANT

config/examples/Creality/CR-20/Configuration.h

@@ -431,6 +431,12 @@
 #define DUMMY_THERMISTOR_998_VALUE 25
 #define DUMMY_THERMISTOR_999_VALUE 100
 
+// Resistor values when using a MAX31865 (sensor -5)
+// Sensor value is typically 100 (PT100) or 1000 (PT1000)
+// Calibration value is typically 430 ohm for AdaFruit PT100 modules and 4300 ohm for AdaFruit PT1000 modules.
+//#define MAX31865_SENSOR_OHMS      100
+//#define MAX31865_CALIBRATION_OHMS 430
+
 // Use temp sensor 1 as a redundant sensor with sensor 0. If the readings
 // from the two sensors differ too much the print will be aborted.
 //#define TEMP_SENSOR_1_AS_REDUNDANT

config/examples/Creality/CR-8/Configuration.h

@@ -431,6 +431,12 @@
 #define DUMMY_THERMISTOR_998_VALUE 25
 #define DUMMY_THERMISTOR_999_VALUE 100
 
+// Resistor values when using a MAX31865 (sensor -5)
+// Sensor value is typically 100 (PT100) or 1000 (PT1000)
+// Calibration value is typically 430 ohm for AdaFruit PT100 modules and 4300 ohm for AdaFruit PT1000 modules.
+//#define MAX31865_SENSOR_OHMS      100
+//#define MAX31865_CALIBRATION_OHMS 430
+
 // Use temp sensor 1 as a redundant sensor with sensor 0. If the readings
 // from the two sensors differ too much the print will be aborted.
 //#define TEMP_SENSOR_1_AS_REDUNDANT

config/examples/Creality/Ender-2/Configuration.h

@@ -431,6 +431,12 @@
 #define DUMMY_THERMISTOR_998_VALUE 25
 #define DUMMY_THERMISTOR_999_VALUE 100
 
+// Resistor values when using a MAX31865 (sensor -5)
+// Sensor value is typically 100 (PT100) or 1000 (PT1000)
+// Calibration value is typically 430 ohm for AdaFruit PT100 modules and 4300 ohm for AdaFruit PT1000 modules.
+//#define MAX31865_SENSOR_OHMS      100
+//#define MAX31865_CALIBRATION_OHMS 430
+
 // Use temp sensor 1 as a redundant sensor with sensor 0. If the readings
 // from the two sensors differ too much the print will be aborted.
 //#define TEMP_SENSOR_1_AS_REDUNDANT

config/examples/Creality/Ender-3 Pro V1.5/Configuration.h

@@ -431,6 +431,12 @@
 #define DUMMY_THERMISTOR_998_VALUE 25
 #define DUMMY_THERMISTOR_999_VALUE 100
 
+// Resistor values when using a MAX31865 (sensor -5)
+// Sensor value is typically 100 (PT100) or 1000 (PT1000)
+// Calibration value is typically 430 ohm for AdaFruit PT100 modules and 4300 ohm for AdaFruit PT1000 modules.
+//#define MAX31865_SENSOR_OHMS      100
+//#define MAX31865_CALIBRATION_OHMS 430
+
 // Use temp sensor 1 as a redundant sensor with sensor 0. If the readings
 // from the two sensors differ too much the print will be aborted.
 //#define TEMP_SENSOR_1_AS_REDUNDANT

config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.0/Configuration.h

@@ -431,6 +431,12 @@
 #define DUMMY_THERMISTOR_998_VALUE 25
 #define DUMMY_THERMISTOR_999_VALUE 100
 
+// Resistor values when using a MAX31865 (sensor -5)
+// Sensor value is typically 100 (PT100) or 1000 (PT1000)
+// Calibration value is typically 430 ohm for AdaFruit PT100 modules and 4300 ohm for AdaFruit PT1000 modules.
+//#define MAX31865_SENSOR_OHMS      100
+//#define MAX31865_CALIBRATION_OHMS 430
+
 // Use temp sensor 1 as a redundant sensor with sensor 0. If the readings
 // from the two sensors differ too much the print will be aborted.
 //#define TEMP_SENSOR_1_AS_REDUNDANT

config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.2/Configuration.h

@@ -431,6 +431,12 @@
 #define DUMMY_THERMISTOR_998_VALUE 25
 #define DUMMY_THERMISTOR_999_VALUE 100
 
+// Resistor values when using a MAX31865 (sensor -5)
+// Sensor value is typically 100 (PT100) or 1000 (PT1000)
+// Calibration value is typically 430 ohm for AdaFruit PT100 modules and 4300 ohm for AdaFruit PT1000 modules.
+//#define MAX31865_SENSOR_OHMS      100
+//#define MAX31865_CALIBRATION_OHMS 430
+
 // Use temp sensor 1 as a redundant sensor with sensor 0. If the readings
 // from the two sensors differ too much the print will be aborted.
 //#define TEMP_SENSOR_1_AS_REDUNDANT

config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 2.0/Configuration.h

@@ -431,6 +431,12 @@
 #define DUMMY_THERMISTOR_998_VALUE 25
 #define DUMMY_THERMISTOR_999_VALUE 100
 
+// Resistor values when using a MAX31865 (sensor -5)
+// Sensor value is typically 100 (PT100) or 1000 (PT1000)
+// Calibration value is typically 430 ohm for AdaFruit PT100 modules and 4300 ohm for AdaFruit PT1000 modules.
+//#define MAX31865_SENSOR_OHMS      100
+//#define MAX31865_CALIBRATION_OHMS 430
+
 // Use temp sensor 1 as a redundant sensor with sensor 0. If the readings
 // from the two sensors differ too much the print will be aborted.
 //#define TEMP_SENSOR_1_AS_REDUNDANT

config/examples/Creality/Ender-3 Pro/CrealityV1/Configuration.h

@@ -431,6 +431,12 @@
 #define DUMMY_THERMISTOR_998_VALUE 25
 #define DUMMY_THERMISTOR_999_VALUE 100
 
+// Resistor values when using a MAX31865 (sensor -5)
+// Sensor value is typically 100 (PT100) or 1000 (PT1000)
+// Calibration value is typically 430 ohm for AdaFruit PT100 modules and 4300 ohm for AdaFruit PT1000 modules.
+//#define MAX31865_SENSOR_OHMS      100
+//#define MAX31865_CALIBRATION_OHMS 430
+
 // Use temp sensor 1 as a redundant sensor with sensor 0. If the readings
 // from the two sensors differ too much the print will be aborted.
 //#define TEMP_SENSOR_1_AS_REDUNDANT

config/examples/Creality/Ender-3 Pro/CrealityV427/Configuration.h

@@ -431,6 +431,12 @@
 #define DUMMY_THERMISTOR_998_VALUE 25
 #define DUMMY_THERMISTOR_999_VALUE 100
 
+// Resistor values when using a MAX31865 (sensor -5)
+// Sensor value is typically 100 (PT100) or 1000 (PT1000)
+// Calibration value is typically 430 ohm for AdaFruit PT100 modules and 4300 ohm for AdaFruit PT1000 modules.
+//#define MAX31865_SENSOR_OHMS      100
+//#define MAX31865_CALIBRATION_OHMS 430
+
 // Use temp sensor 1 as a redundant sensor with sensor 0. If the readings
 // from the two sensors differ too much the print will be aborted.
 //#define TEMP_SENSOR_1_AS_REDUNDANT

config/examples/Creality/Ender-3 V2/Configuration.h

@@ -431,6 +431,12 @@
 #define DUMMY_THERMISTOR_998_VALUE 25
 #define DUMMY_THERMISTOR_999_VALUE 100
 
+// Resistor values when using a MAX31865 (sensor -5)
+// Sensor value is typically 100 (PT100) or 1000 (PT1000)
+// Calibration value is typically 430 ohm for AdaFruit PT100 modules and 4300 ohm for AdaFruit PT1000 modules.
+//#define MAX31865_SENSOR_OHMS      100
+//#define MAX31865_CALIBRATION_OHMS 430
+
 // Use temp sensor 1 as a redundant sensor with sensor 0. If the readings
 // from the two sensors differ too much the print will be aborted.
 //#define TEMP_SENSOR_1_AS_REDUNDANT

config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/2-into-1 Hotend/Configuration.h

@@ -431,6 +431,12 @@
 #define DUMMY_THERMISTOR_998_VALUE 25
 #define DUMMY_THERMISTOR_999_VALUE 100
 
+// Resistor values when using a MAX31865 (sensor -5)
+// Sensor value is typically 100 (PT100) or 1000 (PT1000)
+// Calibration value is typically 430 ohm for AdaFruit PT100 modules and 4300 ohm for AdaFruit PT1000 modules.
+//#define MAX31865_SENSOR_OHMS      100
+//#define MAX31865_CALIBRATION_OHMS 430
+
 // Use temp sensor 1 as a redundant sensor with sensor 0. If the readings
 // from the two sensors differ too much the print will be aborted.
 //#define TEMP_SENSOR_1_AS_REDUNDANT

config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Dual Z/Configuration.h

@@ -431,6 +431,12 @@
 #define DUMMY_THERMISTOR_998_VALUE 25
 #define DUMMY_THERMISTOR_999_VALUE 100
 
+// Resistor values when using a MAX31865 (sensor -5)
+// Sensor value is typically 100 (PT100) or 1000 (PT1000)
+// Calibration value is typically 430 ohm for AdaFruit PT100 modules and 4300 ohm for AdaFruit PT1000 modules.
+//#define MAX31865_SENSOR_OHMS      100
+//#define MAX31865_CALIBRATION_OHMS 430
+
 // Use temp sensor 1 as a redundant sensor with sensor 0. If the readings
 // from the two sensors differ too much the print will be aborted.
 //#define TEMP_SENSOR_1_AS_REDUNDANT

config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Single Extruder/Configuration.h

@@ -431,6 +431,12 @@
 #define DUMMY_THERMISTOR_998_VALUE 25
 #define DUMMY_THERMISTOR_999_VALUE 100
 
+// Resistor values when using a MAX31865 (sensor -5)
+// Sensor value is typically 100 (PT100) or 1000 (PT1000)
+// Calibration value is typically 430 ohm for AdaFruit PT100 modules and 4300 ohm for AdaFruit PT1000 modules.
+//#define MAX31865_SENSOR_OHMS      100
+//#define MAX31865_CALIBRATION_OHMS 430
+
 // Use temp sensor 1 as a redundant sensor with sensor 0. If the readings
 // from the two sensors differ too much the print will be aborted.
 //#define TEMP_SENSOR_1_AS_REDUNDANT

config/examples/Creality/Ender-3/BigTreeTech SKR E3-DIP V1.1/Configuration.h

@@ -431,6 +431,12 @@
 #define DUMMY_THERMISTOR_998_VALUE 25
 #define DUMMY_THERMISTOR_999_VALUE 100
 
+// Resistor values when using a MAX31865 (sensor -5)
+// Sensor value is typically 100 (PT100) or 1000 (PT1000)
+// Calibration value is typically 430 ohm for AdaFruit PT100 modules and 4300 ohm for AdaFruit PT1000 modules.
+//#define MAX31865_SENSOR_OHMS      100
+//#define MAX31865_CALIBRATION_OHMS 430
+
 // Use temp sensor 1 as a redundant sensor with sensor 0. If the readings
 // from the two sensors differ too much the print will be aborted.
 //#define TEMP_SENSOR_1_AS_REDUNDANT

config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.0/Configuration.h

@@ -431,6 +431,12 @@
 #define DUMMY_THERMISTOR_998_VALUE 25
 #define DUMMY_THERMISTOR_999_VALUE 100
 
+// Resistor values when using a MAX31865 (sensor -5)
+// Sensor value is typically 100 (PT100) or 1000 (PT1000)
+// Calibration value is typically 430 ohm for AdaFruit PT100 modules and 4300 ohm for AdaFruit PT1000 modules.
+//#define MAX31865_SENSOR_OHMS      100
+//#define MAX31865_CALIBRATION_OHMS 430
+
 // Use temp sensor 1 as a redundant sensor with sensor 0. If the readings
 // from the two sensors differ too much the print will be aborted.
 //#define TEMP_SENSOR_1_AS_REDUNDANT

config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.2/Configuration.h

@@ -431,6 +431,12 @@
 #define DUMMY_THERMISTOR_998_VALUE 25
 #define DUMMY_THERMISTOR_999_VALUE 100
 
+// Resistor values when using a MAX31865 (sensor -5)
+// Sensor value is typically 100 (PT100) or 1000 (PT1000)
+// Calibration value is typically 430 ohm for AdaFruit PT100 modules and 4300 ohm for AdaFruit PT1000 modules.
+//#define MAX31865_SENSOR_OHMS      100
+//#define MAX31865_CALIBRATION_OHMS 430
+
 // Use temp sensor 1 as a redundant sensor with sensor 0. If the readings
 // from the two sensors differ too much the print will be aborted.
 //#define TEMP_SENSOR_1_AS_REDUNDANT

config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 2.0/Configuration.h

@@ -431,6 +431,12 @@
 #define DUMMY_THERMISTOR_998_VALUE 25
 #define DUMMY_THERMISTOR_999_VALUE 100
 
+// Resistor values when using a MAX31865 (sensor -5)
+// Sensor value is typically 100 (PT100) or 1000 (PT1000)
+// Calibration value is typically 430 ohm for AdaFruit PT100 modules and 4300 ohm for AdaFruit PT1000 modules.
+//#define MAX31865_SENSOR_OHMS      100
+//#define MAX31865_CALIBRATION_OHMS 430
+
 // Use temp sensor 1 as a redundant sensor with sensor 0. If the readings
 // from the two sensors differ too much the print will be aborted.
 //#define TEMP_SENSOR_1_AS_REDUNDANT

config/examples/Creality/Ender-3/CrealityV1/Configuration.h

@@ -431,6 +431,12 @@
 #define DUMMY_THERMISTOR_998_VALUE 25
 #define DUMMY_THERMISTOR_999_VALUE 100
 
+// Resistor values when using a MAX31865 (sensor -5)
+// Sensor value is typically 100 (PT100) or 1000 (PT1000)
+// Calibration value is typically 430 ohm for AdaFruit PT100 modules and 4300 ohm for AdaFruit PT1000 modules.
+//#define MAX31865_SENSOR_OHMS      100
+//#define MAX31865_CALIBRATION_OHMS 430
+
 // Use temp sensor 1 as a redundant sensor with sensor 0. If the readings
 // from the two sensors differ too much the print will be aborted.
 //#define TEMP_SENSOR_1_AS_REDUNDANT

config/examples/Creality/Ender-3/CrealityV427/Configuration.h

@@ -431,6 +431,12 @@
 #define DUMMY_THERMISTOR_998_VALUE 25
 #define DUMMY_THERMISTOR_999_VALUE 100
 
+// Resistor values when using a MAX31865 (sensor -5)
+// Sensor value is typically 100 (PT100) or 1000 (PT1000)
+// Calibration value is typically 430 ohm for AdaFruit PT100 modules and 4300 ohm for AdaFruit PT1000 modules.
+//#define MAX31865_SENSOR_OHMS      100
+//#define MAX31865_CALIBRATION_OHMS 430
+
 // Use temp sensor 1 as a redundant sensor with sensor 0. If the readings
 // from the two sensors differ too much the print will be aborted.
 //#define TEMP_SENSOR_1_AS_REDUNDANT

config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/BLTouch/Configuration.h

@@ -431,6 +431,12 @@
 #define DUMMY_THERMISTOR_998_VALUE 25
 #define DUMMY_THERMISTOR_999_VALUE 100
 
+// Resistor values when using a MAX31865 (sensor -5)
+// Sensor value is typically 100 (PT100) or 1000 (PT1000)
+// Calibration value is typically 430 ohm for AdaFruit PT100 modules and 4300 ohm for AdaFruit PT1000 modules.
+//#define MAX31865_SENSOR_OHMS      100
+//#define MAX31865_CALIBRATION_OHMS 430
+
 // Use temp sensor 1 as a redundant sensor with sensor 0. If the readings
 // from the two sensors differ too much the print will be aborted.
 //#define TEMP_SENSOR_1_AS_REDUNDANT

config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/base/Configuration.h

@@ -431,6 +431,12 @@
 #define DUMMY_THERMISTOR_998_VALUE 25
 #define DUMMY_THERMISTOR_999_VALUE 100
 
+// Resistor values when using a MAX31865 (sensor -5)
+// Sensor value is typically 100 (PT100) or 1000 (PT1000)
+// Calibration value is typically 430 ohm for AdaFruit PT100 modules and 4300 ohm for AdaFruit PT1000 modules.
+//#define MAX31865_SENSOR_OHMS      100
+//#define MAX31865_CALIBRATION_OHMS 430
+
 // Use temp sensor 1 as a redundant sensor with sensor 0. If the readings
 // from the two sensors differ too much the print will be aborted.
 //#define TEMP_SENSOR_1_AS_REDUNDANT

config/examples/Creality/Ender-3/FYSETC Cheetah/BLTouch/Configuration.h

@@ -431,6 +431,12 @@
 #define DUMMY_THERMISTOR_998_VALUE 25
 #define DUMMY_THERMISTOR_999_VALUE 100
 
+// Resistor values when using a MAX31865 (sensor -5)
+// Sensor value is typically 100 (PT100) or 1000 (PT1000)
+// Calibration value is typically 430 ohm for AdaFruit PT100 modules and 4300 ohm for AdaFruit PT1000 modules.
+//#define MAX31865_SENSOR_OHMS      100
+//#define MAX31865_CALIBRATION_OHMS 430
+
 // Use temp sensor 1 as a redundant sensor with sensor 0. If the readings
 // from the two sensors differ too much the print will be aborted.
 //#define TEMP_SENSOR_1_AS_REDUNDANT

config/examples/Creality/Ender-3/FYSETC Cheetah/base/Configuration.h

@@ -431,6 +431,12 @@
 #define DUMMY_THERMISTOR_998_VALUE 25
 #define DUMMY_THERMISTOR_999_VALUE 100
 
+// Resistor values when using a MAX31865 (sensor -5)
+// Sensor value is typically 100 (PT100) or 1000 (PT1000)
+// Calibration value is typically 430 ohm for AdaFruit PT100 modules and 4300 ohm for AdaFruit PT1000 modules.
+//#define MAX31865_SENSOR_OHMS      100
+//#define MAX31865_CALIBRATION_OHMS 430
+
 // Use temp sensor 1 as a redundant sensor with sensor 0. If the readings
 // from the two sensors differ too much the print will be aborted.
 //#define TEMP_SENSOR_1_AS_REDUNDANT

config/examples/Creality/Ender-3/MEEB-3DP/Configuration.h

@@ -431,6 +431,12 @@
 #define DUMMY_THERMISTOR_998_VALUE 25
 #define DUMMY_THERMISTOR_999_VALUE 100
 
+// Resistor values when using a MAX31865 (sensor -5)
+// Sensor value is typically 100 (PT100) or 1000 (PT1000)
+// Calibration value is typically 430 ohm for AdaFruit PT100 modules and 4300 ohm for AdaFruit PT1000 modules.
+//#define MAX31865_SENSOR_OHMS      100
+//#define MAX31865_CALIBRATION_OHMS 430
+
 // Use temp sensor 1 as a redundant sensor with sensor 0. If the readings
 // from the two sensors differ too much the print will be aborted.
 //#define TEMP_SENSOR_1_AS_REDUNDANT

config/examples/Creality/Ender-3/MKS Robin E3 1.0/Configuration.h

@@ -431,6 +431,12 @@
 #define DUMMY_THERMISTOR_998_VALUE 25
 #define DUMMY_THERMISTOR_999_VALUE 100
 
+// Resistor values when using a MAX31865 (sensor -5)
+// Sensor value is typically 100 (PT100) or 1000 (PT1000)
+// Calibration value is typically 430 ohm for AdaFruit PT100 modules and 4300 ohm for AdaFruit PT1000 modules.
+//#define MAX31865_SENSOR_OHMS      100
+//#define MAX31865_CALIBRATION_OHMS 430
+
 // Use temp sensor 1 as a redundant sensor with sensor 0. If the readings
 // from the two sensors differ too much the print will be aborted.
 //#define TEMP_SENSOR_1_AS_REDUNDANT

config/examples/Creality/Ender-4/Configuration.h

@@ -431,6 +431,12 @@
 #define DUMMY_THERMISTOR_998_VALUE 25
 #define DUMMY_THERMISTOR_999_VALUE 100
 
+// Resistor values when using a MAX31865 (sensor -5)
+// Sensor value is typically 100 (PT100) or 1000 (PT1000)
+// Calibration value is typically 430 ohm for AdaFruit PT100 modules and 4300 ohm for AdaFruit PT1000 modules.
+//#define MAX31865_SENSOR_OHMS      100
+//#define MAX31865_CALIBRATION_OHMS 430
+
 // Use temp sensor 1 as a redundant sensor with sensor 0. If the readings
 // from the two sensors differ too much the print will be aborted.
 //#define TEMP_SENSOR_1_AS_REDUNDANT

config/examples/Creality/Ender-5 Pro/Creality/Configuration.h

@@ -431,6 +431,12 @@
 #define DUMMY_THERMISTOR_998_VALUE 25
 #define DUMMY_THERMISTOR_999_VALUE 100
 
+// Resistor values when using a MAX31865 (sensor -5)
+// Sensor value is typically 100 (PT100) or 1000 (PT1000)
+// Calibration value is typically 430 ohm for AdaFruit PT100 modules and 4300 ohm for AdaFruit PT1000 modules.
+//#define MAX31865_SENSOR_OHMS      100
+//#define MAX31865_CALIBRATION_OHMS 430
+
 // Use temp sensor 1 as a redundant sensor with sensor 0. If the readings
 // from the two sensors differ too much the print will be aborted.
 //#define TEMP_SENSOR_1_AS_REDUNDANT

config/examples/Creality/Ender-5 Pro/CrealityV427/Configuration.h

@@ -431,6 +431,12 @@
 #define DUMMY_THERMISTOR_998_VALUE 25
 #define DUMMY_THERMISTOR_999_VALUE 100
 
+// Resistor values when using a MAX31865 (sensor -5)
+// Sensor value is typically 100 (PT100) or 1000 (PT1000)
+// Calibration value is typically 430 ohm for AdaFruit PT100 modules and 4300 ohm for AdaFruit PT1000 modules.
+//#define MAX31865_SENSOR_OHMS      100
+//#define MAX31865_CALIBRATION_OHMS 430
+
 // Use temp sensor 1 as a redundant sensor with sensor 0. If the readings
 // from the two sensors differ too much the print will be aborted.
 //#define TEMP_SENSOR_1_AS_REDUNDANT

config/examples/Creality/Ender-5/BigTreeTech SKR 1.4 Turbo (TMC2209)/Configuration.h

@@ -447,6 +447,12 @@
 #define DUMMY_THERMISTOR_998_VALUE 25
 #define DUMMY_THERMISTOR_999_VALUE 100
 
+// Resistor values when using a MAX31865 (sensor -5)
+// Sensor value is typically 100 (PT100) or 1000 (PT1000)
+// Calibration value is typically 430 ohm for AdaFruit PT100 modules and 4300 ohm for AdaFruit PT1000 modules.
+//#define MAX31865_SENSOR_OHMS      100
+//#define MAX31865_CALIBRATION_OHMS 430
+
 // Use temp sensor 1 as a redundant sensor with sensor 0. If the readings
 // from the two sensors differ too much the print will be aborted.
 //#define TEMP_SENSOR_1_AS_REDUNDANT

config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 2.0/Configuration.h

@@ -431,6 +431,12 @@
 #define DUMMY_THERMISTOR_998_VALUE 25
 #define DUMMY_THERMISTOR_999_VALUE 100
 
+// Resistor values when using a MAX31865 (sensor -5)
+// Sensor value is typically 100 (PT100) or 1000 (PT1000)
+// Calibration value is typically 430 ohm for AdaFruit PT100 modules and 4300 ohm for AdaFruit PT1000 modules.
+//#define MAX31865_SENSOR_OHMS      100
+//#define MAX31865_CALIBRATION_OHMS 430
+
 // Use temp sensor 1 as a redundant sensor with sensor 0. If the readings
 // from the two sensors differ too much the print will be aborted.
 //#define TEMP_SENSOR_1_AS_REDUNDANT

config/examples/Creality/Ender-5/Creality/Configuration.h

@@ -431,6 +431,12 @@
 #define DUMMY_THERMISTOR_998_VALUE 25
 #define DUMMY_THERMISTOR_999_VALUE 100
 
+// Resistor values when using a MAX31865 (sensor -5)
+// Sensor value is typically 100 (PT100) or 1000 (PT1000)
+// Calibration value is typically 430 ohm for AdaFruit PT100 modules and 4300 ohm for AdaFruit PT1000 modules.
+//#define MAX31865_SENSOR_OHMS      100
+//#define MAX31865_CALIBRATION_OHMS 430
+
 // Use temp sensor 1 as a redundant sensor with sensor 0. If the readings
 // from the two sensors differ too much the print will be aborted.
 //#define TEMP_SENSOR_1_AS_REDUNDANT

config/examples/Creality/Ender-5/CrealityV427/Configuration.h

@@ -431,6 +431,12 @@
 #define DUMMY_THERMISTOR_998_VALUE 25
 #define DUMMY_THERMISTOR_999_VALUE 100
 
+// Resistor values when using a MAX31865 (sensor -5)
+// Sensor value is typically 100 (PT100) or 1000 (PT1000)
+// Calibration value is typically 430 ohm for AdaFruit PT100 modules and 4300 ohm for AdaFruit PT1000 modules.
+//#define MAX31865_SENSOR_OHMS      100
+//#define MAX31865_CALIBRATION_OHMS 430
+
 // Use temp sensor 1 as a redundant sensor with sensor 0. If the readings
 // from the two sensors differ too much the print will be aborted.
 //#define TEMP_SENSOR_1_AS_REDUNDANT

config/examples/Creality/Ender-5_Plus/Configuration.h

@@ -433,6 +433,12 @@
 #define DUMMY_THERMISTOR_998_VALUE 25
 #define DUMMY_THERMISTOR_999_VALUE 100
 
+// Resistor values when using a MAX31865 (sensor -5)
+// Sensor value is typically 100 (PT100) or 1000 (PT1000)
+// Calibration value is typically 430 ohm for AdaFruit PT100 modules and 4300 ohm for AdaFruit PT1000 modules.
+//#define MAX31865_SENSOR_OHMS      100
+//#define MAX31865_CALIBRATION_OHMS 430
+
 // Use temp sensor 1 as a redundant sensor with sensor 0. If the readings
 // from the two sensors differ too much the print will be aborted.
 //#define TEMP_SENSOR_1_AS_REDUNDANT

config/examples/Dagoma/Disco Ultimate/Configuration.h

@@ -431,6 +431,12 @@
 #define DUMMY_THERMISTOR_998_VALUE 25
 #define DUMMY_THERMISTOR_999_VALUE 100
 
+// Resistor values when using a MAX31865 (sensor -5)
+// Sensor value is typically 100 (PT100) or 1000 (PT1000)
+// Calibration value is typically 430 ohm for AdaFruit PT100 modules and 4300 ohm for AdaFruit PT1000 modules.
+//#define MAX31865_SENSOR_OHMS      100
+//#define MAX31865_CALIBRATION_OHMS 430
+
 // Use temp sensor 1 as a redundant sensor with sensor 0. If the readings
 // from the two sensors differ too much the print will be aborted.
 //#define TEMP_SENSOR_1_AS_REDUNDANT

config/examples/Daycom/3DP-100/Configuration.h

@@ -433,6 +433,12 @@
 #define DUMMY_THERMISTOR_998_VALUE 25
 #define DUMMY_THERMISTOR_999_VALUE 100
 
+// Resistor values when using a MAX31865 (sensor -5)
+// Sensor value is typically 100 (PT100) or 1000 (PT1000)
+// Calibration value is typically 430 ohm for AdaFruit PT100 modules and 4300 ohm for AdaFruit PT1000 modules.
+//#define MAX31865_SENSOR_OHMS      100
+//#define MAX31865_CALIBRATION_OHMS 430
+
 // Use temp sensor 1 as a redundant sensor with sensor 0. If the readings
 // from the two sensors differ too much the print will be aborted.
 //#define TEMP_SENSOR_1_AS_REDUNDANT

config/examples/EXP3D/Imprimante multifonction/Configuration.h

@@ -431,6 +431,12 @@
 #define DUMMY_THERMISTOR_998_VALUE 25
 #define DUMMY_THERMISTOR_999_VALUE 100
 
+// Resistor values when using a MAX31865 (sensor -5)
+// Sensor value is typically 100 (PT100) or 1000 (PT1000)
+// Calibration value is typically 430 ohm for AdaFruit PT100 modules and 4300 ohm for AdaFruit PT1000 modules.
+//#define MAX31865_SENSOR_OHMS      100
+//#define MAX31865_CALIBRATION_OHMS 430
+
 // Use temp sensor 1 as a redundant sensor with sensor 0. If the readings
 // from the two sensors differ too much the print will be aborted.
 //#define TEMP_SENSOR_1_AS_REDUNDANT

config/examples/Einstart-S/Configuration.h

@@ -431,6 +431,12 @@
 #define DUMMY_THERMISTOR_998_VALUE 25
 #define DUMMY_THERMISTOR_999_VALUE 100
 
+// Resistor values when using a MAX31865 (sensor -5)
+// Sensor value is typically 100 (PT100) or 1000 (PT1000)
+// Calibration value is typically 430 ohm for AdaFruit PT100 modules and 4300 ohm for AdaFruit PT1000 modules.
+//#define MAX31865_SENSOR_OHMS      100
+//#define MAX31865_CALIBRATION_OHMS 430
+
 // Use temp sensor 1 as a redundant sensor with sensor 0. If the readings
 // from the two sensors differ too much the print will be aborted.
 //#define TEMP_SENSOR_1_AS_REDUNDANT

config/examples/FYSETC/AIO_II/Configuration.h

@@ -431,6 +431,12 @@
 #define DUMMY_THERMISTOR_998_VALUE 25
 #define DUMMY_THERMISTOR_999_VALUE 100
 
+// Resistor values when using a MAX31865 (sensor -5)
+// Sensor value is typically 100 (PT100) or 1000 (PT1000)
+// Calibration value is typically 430 ohm for AdaFruit PT100 modules and 4300 ohm for AdaFruit PT1000 modules.
+//#define MAX31865_SENSOR_OHMS      100
+//#define MAX31865_CALIBRATION_OHMS 430
+
 // Use temp sensor 1 as a redundant sensor with sensor 0. If the readings
 // from the two sensors differ too much the print will be aborted.
 //#define TEMP_SENSOR_1_AS_REDUNDANT

config/examples/FYSETC/F6_13/Configuration.h

@@ -433,6 +433,12 @@
 #define DUMMY_THERMISTOR_998_VALUE 25
 #define DUMMY_THERMISTOR_999_VALUE 100
 
+// Resistor values when using a MAX31865 (sensor -5)
+// Sensor value is typically 100 (PT100) or 1000 (PT1000)
+// Calibration value is typically 430 ohm for AdaFruit PT100 modules and 4300 ohm for AdaFruit PT1000 modules.
+//#define MAX31865_SENSOR_OHMS      100
+//#define MAX31865_CALIBRATION_OHMS 430
+
 // Use temp sensor 1 as a redundant sensor with sensor 0. If the readings
 // from the two sensors differ too much the print will be aborted.
 //#define TEMP_SENSOR_1_AS_REDUNDANT

config/examples/FYSETC/S6/Configuration.h

@@ -431,6 +431,12 @@
 #define DUMMY_THERMISTOR_998_VALUE 25
 #define DUMMY_THERMISTOR_999_VALUE 100
 
+// Resistor values when using a MAX31865 (sensor -5)
+// Sensor value is typically 100 (PT100) or 1000 (PT1000)
+// Calibration value is typically 430 ohm for AdaFruit PT100 modules and 4300 ohm for AdaFruit PT1000 modules.
+//#define MAX31865_SENSOR_OHMS      100
+//#define MAX31865_CALIBRATION_OHMS 430
+
 // Use temp sensor 1 as a redundant sensor with sensor 0. If the readings
 // from the two sensors differ too much the print will be aborted.
 //#define TEMP_SENSOR_1_AS_REDUNDANT

config/examples/Felix/DUAL/Configuration.h

@@ -431,6 +431,12 @@
 #define DUMMY_THERMISTOR_998_VALUE 25
 #define DUMMY_THERMISTOR_999_VALUE 100
 
+// Resistor values when using a MAX31865 (sensor -5)
+// Sensor value is typically 100 (PT100) or 1000 (PT1000)
+// Calibration value is typically 430 ohm for AdaFruit PT100 modules and 4300 ohm for AdaFruit PT1000 modules.
+//#define MAX31865_SENSOR_OHMS      100
+//#define MAX31865_CALIBRATION_OHMS 430
+
 // Use temp sensor 1 as a redundant sensor with sensor 0. If the readings
 // from the two sensors differ too much the print will be aborted.
 //#define TEMP_SENSOR_1_AS_REDUNDANT

config/examples/Felix/Single/Configuration.h

@@ -431,6 +431,12 @@
 #define DUMMY_THERMISTOR_998_VALUE 25
 #define DUMMY_THERMISTOR_999_VALUE 100
 
+// Resistor values when using a MAX31865 (sensor -5)
+// Sensor value is typically 100 (PT100) or 1000 (PT1000)
+// Calibration value is typically 430 ohm for AdaFruit PT100 modules and 4300 ohm for AdaFruit PT1000 modules.
+//#define MAX31865_SENSOR_OHMS      100
+//#define MAX31865_CALIBRATION_OHMS 430
+
 // Use temp sensor 1 as a redundant sensor with sensor 0. If the readings
 // from the two sensors differ too much the print will be aborted.
 //#define TEMP_SENSOR_1_AS_REDUNDANT

config/examples/FlashForge/Creator 2X/Configuration.h

@@ -431,6 +431,12 @@
 #define DUMMY_THERMISTOR_998_VALUE 25
 #define DUMMY_THERMISTOR_999_VALUE 100
 
+// Resistor values when using a MAX31865 (sensor -5)
+// Sensor value is typically 100 (PT100) or 1000 (PT1000)
+// Calibration value is typically 430 ohm for AdaFruit PT100 modules and 4300 ohm for AdaFruit PT1000 modules.
+//#define MAX31865_SENSOR_OHMS      100
+//#define MAX31865_CALIBRATION_OHMS 430
+
 // Use temp sensor 1 as a redundant sensor with sensor 0. If the readings
 // from the two sensors differ too much the print will be aborted.
 //#define TEMP_SENSOR_1_AS_REDUNDANT

config/examples/FlashForge/CreatorPro/Configuration.h

@@ -431,6 +431,12 @@
 #define DUMMY_THERMISTOR_998_VALUE 25
 #define DUMMY_THERMISTOR_999_VALUE 100
 
+// Resistor values when using a MAX31865 (sensor -5)
+// Sensor value is typically 100 (PT100) or 1000 (PT1000)
+// Calibration value is typically 430 ohm for AdaFruit PT100 modules and 4300 ohm for AdaFruit PT1000 modules.
+//#define MAX31865_SENSOR_OHMS      100
+//#define MAX31865_CALIBRATION_OHMS 430
+
 // Use temp sensor 1 as a redundant sensor with sensor 0. If the readings
 // from the two sensors differ too much the print will be aborted.
 //#define TEMP_SENSOR_1_AS_REDUNDANT

config/examples/FlyingBear/P905H/Configuration.h

@@ -431,6 +431,12 @@
 #define DUMMY_THERMISTOR_998_VALUE 25
 #define DUMMY_THERMISTOR_999_VALUE 100
 
+// Resistor values when using a MAX31865 (sensor -5)
+// Sensor value is typically 100 (PT100) or 1000 (PT1000)
+// Calibration value is typically 430 ohm for AdaFruit PT100 modules and 4300 ohm for AdaFruit PT1000 modules.
+//#define MAX31865_SENSOR_OHMS      100
+//#define MAX31865_CALIBRATION_OHMS 430
+
 // Use temp sensor 1 as a redundant sensor with sensor 0. If the readings
 // from the two sensors differ too much the print will be aborted.
 //#define TEMP_SENSOR_1_AS_REDUNDANT

config/examples/FolgerTech/i3-2020/Configuration.h

@@ -431,6 +431,12 @@
 #define DUMMY_THERMISTOR_998_VALUE 25
 #define DUMMY_THERMISTOR_999_VALUE 100
 
+// Resistor values when using a MAX31865 (sensor -5)
+// Sensor value is typically 100 (PT100) or 1000 (PT1000)
+// Calibration value is typically 430 ohm for AdaFruit PT100 modules and 4300 ohm for AdaFruit PT1000 modules.
+//#define MAX31865_SENSOR_OHMS      100
+//#define MAX31865_CALIBRATION_OHMS 430
+
 // Use temp sensor 1 as a redundant sensor with sensor 0. If the readings
 // from the two sensors differ too much the print will be aborted.
 //#define TEMP_SENSOR_1_AS_REDUNDANT

config/examples/Formbot/Raptor/Configuration.h

@@ -478,6 +478,12 @@
 #define DUMMY_THERMISTOR_998_VALUE 25
 #define DUMMY_THERMISTOR_999_VALUE 100
 
+// Resistor values when using a MAX31865 (sensor -5)
+// Sensor value is typically 100 (PT100) or 1000 (PT1000)
+// Calibration value is typically 430 ohm for AdaFruit PT100 modules and 4300 ohm for AdaFruit PT1000 modules.
+//#define MAX31865_SENSOR_OHMS      100
+//#define MAX31865_CALIBRATION_OHMS 430
+
 // Use temp sensor 1 as a redundant sensor with sensor 0. If the readings
 // from the two sensors differ too much the print will be aborted.
 //#define TEMP_SENSOR_1_AS_REDUNDANT

config/examples/Formbot/T_Rex_2+/Configuration.h

@@ -431,6 +431,12 @@
 #define DUMMY_THERMISTOR_998_VALUE 25
 #define DUMMY_THERMISTOR_999_VALUE 100
 
+// Resistor values when using a MAX31865 (sensor -5)
+// Sensor value is typically 100 (PT100) or 1000 (PT1000)
+// Calibration value is typically 430 ohm for AdaFruit PT100 modules and 4300 ohm for AdaFruit PT1000 modules.
+//#define MAX31865_SENSOR_OHMS      100
+//#define MAX31865_CALIBRATION_OHMS 430
+
 // Use temp sensor 1 as a redundant sensor with sensor 0. If the readings
 // from the two sensors differ too much the print will be aborted.
 //#define TEMP_SENSOR_1_AS_REDUNDANT

config/examples/Formbot/T_Rex_3/Configuration.h

@@ -434,6 +434,12 @@
 #define DUMMY_THERMISTOR_998_VALUE 25
 #define DUMMY_THERMISTOR_999_VALUE 100
 
+// Resistor values when using a MAX31865 (sensor -5)
+// Sensor value is typically 100 (PT100) or 1000 (PT1000)
+// Calibration value is typically 430 ohm for AdaFruit PT100 modules and 4300 ohm for AdaFruit PT1000 modules.
+//#define MAX31865_SENSOR_OHMS      100
+//#define MAX31865_CALIBRATION_OHMS 430
+
 // Use temp sensor 1 as a redundant sensor with sensor 0. If the readings
 // from the two sensors differ too much the print will be aborted.
 //#define TEMP_SENSOR_1_AS_REDUNDANT

config/examples/Geeetech/A10/Configuration.h

@@ -431,6 +431,12 @@
 #define DUMMY_THERMISTOR_998_VALUE 25
 #define DUMMY_THERMISTOR_999_VALUE 100
 
+// Resistor values when using a MAX31865 (sensor -5)
+// Sensor value is typically 100 (PT100) or 1000 (PT1000)
+// Calibration value is typically 430 ohm for AdaFruit PT100 modules and 4300 ohm for AdaFruit PT1000 modules.
+//#define MAX31865_SENSOR_OHMS      100
+//#define MAX31865_CALIBRATION_OHMS 430
+
 // Use temp sensor 1 as a redundant sensor with sensor 0. If the readings
 // from the two sensors differ too much the print will be aborted.
 //#define TEMP_SENSOR_1_AS_REDUNDANT

config/examples/Geeetech/A10D/Configuration.h

@@ -431,6 +431,12 @@
 #define DUMMY_THERMISTOR_998_VALUE 25
 #define DUMMY_THERMISTOR_999_VALUE 100
 
+// Resistor values when using a MAX31865 (sensor -5)
+// Sensor value is typically 100 (PT100) or 1000 (PT1000)
+// Calibration value is typically 430 ohm for AdaFruit PT100 modules and 4300 ohm for AdaFruit PT1000 modules.
+//#define MAX31865_SENSOR_OHMS      100
+//#define MAX31865_CALIBRATION_OHMS 430
+
 // Use temp sensor 1 as a redundant sensor with sensor 0. If the readings
 // from the two sensors differ too much the print will be aborted.
 //#define TEMP_SENSOR_1_AS_REDUNDANT

config/examples/Geeetech/A10M/Configuration.h

@@ -431,6 +431,12 @@
 #define DUMMY_THERMISTOR_998_VALUE 25
 #define DUMMY_THERMISTOR_999_VALUE 100
 
+// Resistor values when using a MAX31865 (sensor -5)
+// Sensor value is typically 100 (PT100) or 1000 (PT1000)
+// Calibration value is typically 430 ohm for AdaFruit PT100 modules and 4300 ohm for AdaFruit PT1000 modules.
+//#define MAX31865_SENSOR_OHMS      100
+//#define MAX31865_CALIBRATION_OHMS 430
+
 // Use temp sensor 1 as a redundant sensor with sensor 0. If the readings
 // from the two sensors differ too much the print will be aborted.
 //#define TEMP_SENSOR_1_AS_REDUNDANT