3D-printing/Configurations
1
0
Fork 0
mirror of https://github.com/MarlinFirmware/Configurations.git synced 2025-07-08 15:37:32 -06:00
Code Issues Projects Releases Packages Wiki Activity Actions

Whitespace

Browse source
This commit is contained in:
Scott Lahteine 2020-12-14 22:31:20 -06:00
parent 69d3408582
commit 1b2f3b17cb
239 changed files with 479 additions and 479 deletions
Download patch file Download diff file Expand all files Collapse all files

4
config/default/Configuration.h
View file

@ -963,14 +963,14 @@
* X and Y offset * X and Y offset
* Use a caliper or ruler to measure the distance from the tip of * Use a caliper or ruler to measure the distance from the tip of
* the Nozzle to the center-point of the Probe in the X and Y axes. * the Nozzle to the center-point of the Probe in the X and Y axes.
* *
* Z offset * Z offset
* - For the Z offset use your best known value and adjust at runtime. * - For the Z offset use your best known value and adjust at runtime.
* - Common probes trigger below the nozzle and have negative values for Z offset. * - Common probes trigger below the nozzle and have negative values for Z offset.
* - Probes triggering above the nozzle height are uncommon but do exist. When using * - Probes triggering above the nozzle height are uncommon but do exist. When using
* probes such as this, carefully set Z_CLEARANCE_DEPLOY_PROBE and Z_CLEARANCE_BETWEEN_PROBES * probes such as this, carefully set Z_CLEARANCE_DEPLOY_PROBE and Z_CLEARANCE_BETWEEN_PROBES
* to avoid collisions during probing. * to avoid collisions during probing.
* *
* Tune and Adjust * Tune and Adjust
* - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc.
* - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset.

4
config/examples/3DFabXYZ/Migbot/Configuration.h
View file

@ -965,14 +965,14 @@
* X and Y offset * X and Y offset
* Use a caliper or ruler to measure the distance from the tip of * Use a caliper or ruler to measure the distance from the tip of
* the Nozzle to the center-point of the Probe in the X and Y axes. * the Nozzle to the center-point of the Probe in the X and Y axes.
* *
* Z offset * Z offset
* - For the Z offset use your best known value and adjust at runtime. * - For the Z offset use your best known value and adjust at runtime.
* - Common probes trigger below the nozzle and have negative values for Z offset. * - Common probes trigger below the nozzle and have negative values for Z offset.
* - Probes triggering above the nozzle height are uncommon but do exist. When using * - Probes triggering above the nozzle height are uncommon but do exist. When using
* probes such as this, carefully set Z_CLEARANCE_DEPLOY_PROBE and Z_CLEARANCE_BETWEEN_PROBES * probes such as this, carefully set Z_CLEARANCE_DEPLOY_PROBE and Z_CLEARANCE_BETWEEN_PROBES
* to avoid collisions during probing. * to avoid collisions during probing.
* *
* Tune and Adjust * Tune and Adjust
* - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc.
* - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset.

4
config/examples/ADIMLab/Gantry v1/Configuration.h
View file

@ -963,14 +963,14 @@
* X and Y offset * X and Y offset
* Use a caliper or ruler to measure the distance from the tip of * Use a caliper or ruler to measure the distance from the tip of
* the Nozzle to the center-point of the Probe in the X and Y axes. * the Nozzle to the center-point of the Probe in the X and Y axes.
* *
* Z offset * Z offset
* - For the Z offset use your best known value and adjust at runtime. * - For the Z offset use your best known value and adjust at runtime.
* - Common probes trigger below the nozzle and have negative values for Z offset. * - Common probes trigger below the nozzle and have negative values for Z offset.
* - Probes triggering above the nozzle height are uncommon but do exist. When using * - Probes triggering above the nozzle height are uncommon but do exist. When using
* probes such as this, carefully set Z_CLEARANCE_DEPLOY_PROBE and Z_CLEARANCE_BETWEEN_PROBES * probes such as this, carefully set Z_CLEARANCE_DEPLOY_PROBE and Z_CLEARANCE_BETWEEN_PROBES
* to avoid collisions during probing. * to avoid collisions during probing.
* *
* Tune and Adjust * Tune and Adjust
* - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc.
* - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset.

4
config/examples/ADIMLab/Gantry v2/Configuration.h
View file

@ -963,14 +963,14 @@
* X and Y offset * X and Y offset
* Use a caliper or ruler to measure the distance from the tip of * Use a caliper or ruler to measure the distance from the tip of
* the Nozzle to the center-point of the Probe in the X and Y axes. * the Nozzle to the center-point of the Probe in the X and Y axes.
* *
* Z offset * Z offset
* - For the Z offset use your best known value and adjust at runtime. * - For the Z offset use your best known value and adjust at runtime.
* - Common probes trigger below the nozzle and have negative values for Z offset. * - Common probes trigger below the nozzle and have negative values for Z offset.
* - Probes triggering above the nozzle height are uncommon but do exist. When using * - Probes triggering above the nozzle height are uncommon but do exist. When using
* probes such as this, carefully set Z_CLEARANCE_DEPLOY_PROBE and Z_CLEARANCE_BETWEEN_PROBES * probes such as this, carefully set Z_CLEARANCE_DEPLOY_PROBE and Z_CLEARANCE_BETWEEN_PROBES
* to avoid collisions during probing. * to avoid collisions during probing.
* *
* Tune and Adjust * Tune and Adjust
* - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc.
* - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset.

4
config/examples/AlephObjects/TAZ4/Configuration.h
View file

@ -974,14 +974,14 @@
* X and Y offset * X and Y offset
* Use a caliper or ruler to measure the distance from the tip of * Use a caliper or ruler to measure the distance from the tip of
* the Nozzle to the center-point of the Probe in the X and Y axes. * the Nozzle to the center-point of the Probe in the X and Y axes.
* *
* Z offset * Z offset
* - For the Z offset use your best known value and adjust at runtime. * - For the Z offset use your best known value and adjust at runtime.
* - Common probes trigger below the nozzle and have negative values for Z offset. * - Common probes trigger below the nozzle and have negative values for Z offset.
* - Probes triggering above the nozzle height are uncommon but do exist. When using * - Probes triggering above the nozzle height are uncommon but do exist. When using
* probes such as this, carefully set Z_CLEARANCE_DEPLOY_PROBE and Z_CLEARANCE_BETWEEN_PROBES * probes such as this, carefully set Z_CLEARANCE_DEPLOY_PROBE and Z_CLEARANCE_BETWEEN_PROBES
* to avoid collisions during probing. * to avoid collisions during probing.
* *
* Tune and Adjust * Tune and Adjust
* - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc.
* - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset.

4
config/examples/Alfawise/U20-bltouch/Configuration.h
View file

@ -1019,14 +1019,14 @@
* X and Y offset * X and Y offset
* Use a caliper or ruler to measure the distance from the tip of * Use a caliper or ruler to measure the distance from the tip of
* the Nozzle to the center-point of the Probe in the X and Y axes. * the Nozzle to the center-point of the Probe in the X and Y axes.
* *
* Z offset * Z offset
* - For the Z offset use your best known value and adjust at runtime. * - For the Z offset use your best known value and adjust at runtime.
* - Common probes trigger below the nozzle and have negative values for Z offset. * - Common probes trigger below the nozzle and have negative values for Z offset.
* - Probes triggering above the nozzle height are uncommon but do exist. When using * - Probes triggering above the nozzle height are uncommon but do exist. When using
* probes such as this, carefully set Z_CLEARANCE_DEPLOY_PROBE and Z_CLEARANCE_BETWEEN_PROBES * probes such as this, carefully set Z_CLEARANCE_DEPLOY_PROBE and Z_CLEARANCE_BETWEEN_PROBES
* to avoid collisions during probing. * to avoid collisions during probing.
* *
* Tune and Adjust * Tune and Adjust
* - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc.
* - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset.

4
config/examples/Alfawise/U20/Configuration.h
View file

@ -1021,14 +1021,14 @@
* X and Y offset * X and Y offset
* Use a caliper or ruler to measure the distance from the tip of * Use a caliper or ruler to measure the distance from the tip of
* the Nozzle to the center-point of the Probe in the X and Y axes. * the Nozzle to the center-point of the Probe in the X and Y axes.
* *
* Z offset * Z offset
* - For the Z offset use your best known value and adjust at runtime. * - For the Z offset use your best known value and adjust at runtime.
* - Common probes trigger below the nozzle and have negative values for Z offset. * - Common probes trigger below the nozzle and have negative values for Z offset.
* - Probes triggering above the nozzle height are uncommon but do exist. When using * - Probes triggering above the nozzle height are uncommon but do exist. When using
* probes such as this, carefully set Z_CLEARANCE_DEPLOY_PROBE and Z_CLEARANCE_BETWEEN_PROBES * probes such as this, carefully set Z_CLEARANCE_DEPLOY_PROBE and Z_CLEARANCE_BETWEEN_PROBES
* to avoid collisions during probing. * to avoid collisions during probing.
* *
* Tune and Adjust * Tune and Adjust
* - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc.
* - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset.

4
config/examples/AliExpress/CL-260/Configuration.h
View file

@ -963,14 +963,14 @@
* X and Y offset * X and Y offset
* Use a caliper or ruler to measure the distance from the tip of * Use a caliper or ruler to measure the distance from the tip of
* the Nozzle to the center-point of the Probe in the X and Y axes. * the Nozzle to the center-point of the Probe in the X and Y axes.
* *
* Z offset * Z offset
* - For the Z offset use your best known value and adjust at runtime. * - For the Z offset use your best known value and adjust at runtime.
* - Common probes trigger below the nozzle and have negative values for Z offset. * - Common probes trigger below the nozzle and have negative values for Z offset.
* - Probes triggering above the nozzle height are uncommon but do exist. When using * - Probes triggering above the nozzle height are uncommon but do exist. When using
* probes such as this, carefully set Z_CLEARANCE_DEPLOY_PROBE and Z_CLEARANCE_BETWEEN_PROBES * probes such as this, carefully set Z_CLEARANCE_DEPLOY_PROBE and Z_CLEARANCE_BETWEEN_PROBES
* to avoid collisions during probing. * to avoid collisions during probing.
* *
* Tune and Adjust * Tune and Adjust
* - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc.
* - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset.

4
config/examples/AliExpress/UM2pExt/Configuration.h
View file

@ -964,14 +964,14 @@
* X and Y offset * X and Y offset
* Use a caliper or ruler to measure the distance from the tip of * Use a caliper or ruler to measure the distance from the tip of
* the Nozzle to the center-point of the Probe in the X and Y axes. * the Nozzle to the center-point of the Probe in the X and Y axes.
* *
* Z offset * Z offset
* - For the Z offset use your best known value and adjust at runtime. * - For the Z offset use your best known value and adjust at runtime.
* - Common probes trigger below the nozzle and have negative values for Z offset. * - Common probes trigger below the nozzle and have negative values for Z offset.
* - Probes triggering above the nozzle height are uncommon but do exist. When using * - Probes triggering above the nozzle height are uncommon but do exist. When using
* probes such as this, carefully set Z_CLEARANCE_DEPLOY_PROBE and Z_CLEARANCE_BETWEEN_PROBES * probes such as this, carefully set Z_CLEARANCE_DEPLOY_PROBE and Z_CLEARANCE_BETWEEN_PROBES
* to avoid collisions during probing. * to avoid collisions during probing.
* *
* Tune and Adjust * Tune and Adjust
* - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc.
* - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset.

4
config/examples/Anet/A2/Configuration.h
View file

@ -963,14 +963,14 @@
* X and Y offset * X and Y offset
* Use a caliper or ruler to measure the distance from the tip of * Use a caliper or ruler to measure the distance from the tip of
* the Nozzle to the center-point of the Probe in the X and Y axes. * the Nozzle to the center-point of the Probe in the X and Y axes.
* *
* Z offset * Z offset
* - For the Z offset use your best known value and adjust at runtime. * - For the Z offset use your best known value and adjust at runtime.
* - Common probes trigger below the nozzle and have negative values for Z offset. * - Common probes trigger below the nozzle and have negative values for Z offset.
* - Probes triggering above the nozzle height are uncommon but do exist. When using * - Probes triggering above the nozzle height are uncommon but do exist. When using
* probes such as this, carefully set Z_CLEARANCE_DEPLOY_PROBE and Z_CLEARANCE_BETWEEN_PROBES * probes such as this, carefully set Z_CLEARANCE_DEPLOY_PROBE and Z_CLEARANCE_BETWEEN_PROBES
* to avoid collisions during probing. * to avoid collisions during probing.
* *
* Tune and Adjust * Tune and Adjust
* - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc.
* - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset.

4
config/examples/Anet/A2plus/Configuration.h
View file

@ -963,14 +963,14 @@
* X and Y offset * X and Y offset
* Use a caliper or ruler to measure the distance from the tip of * Use a caliper or ruler to measure the distance from the tip of
* the Nozzle to the center-point of the Probe in the X and Y axes. * the Nozzle to the center-point of the Probe in the X and Y axes.
* *
* Z offset * Z offset
* - For the Z offset use your best known value and adjust at runtime. * - For the Z offset use your best known value and adjust at runtime.
* - Common probes trigger below the nozzle and have negative values for Z offset. * - Common probes trigger below the nozzle and have negative values for Z offset.
* - Probes triggering above the nozzle height are uncommon but do exist. When using * - Probes triggering above the nozzle height are uncommon but do exist. When using
* probes such as this, carefully set Z_CLEARANCE_DEPLOY_PROBE and Z_CLEARANCE_BETWEEN_PROBES * probes such as this, carefully set Z_CLEARANCE_DEPLOY_PROBE and Z_CLEARANCE_BETWEEN_PROBES
* to avoid collisions during probing. * to avoid collisions during probing.
* *
* Tune and Adjust * Tune and Adjust
* - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc.
* - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset.

4
config/examples/Anet/A6/Configuration.h
View file

@ -980,14 +980,14 @@
* X and Y offset * X and Y offset
* Use a caliper or ruler to measure the distance from the tip of * Use a caliper or ruler to measure the distance from the tip of
* the Nozzle to the center-point of the Probe in the X and Y axes. * the Nozzle to the center-point of the Probe in the X and Y axes.
* *
* Z offset * Z offset
* - For the Z offset use your best known value and adjust at runtime. * - For the Z offset use your best known value and adjust at runtime.
* - Common probes trigger below the nozzle and have negative values for Z offset. * - Common probes trigger below the nozzle and have negative values for Z offset.
* - Probes triggering above the nozzle height are uncommon but do exist. When using * - Probes triggering above the nozzle height are uncommon but do exist. When using
* probes such as this, carefully set Z_CLEARANCE_DEPLOY_PROBE and Z_CLEARANCE_BETWEEN_PROBES * probes such as this, carefully set Z_CLEARANCE_DEPLOY_PROBE and Z_CLEARANCE_BETWEEN_PROBES
* to avoid collisions during probing. * to avoid collisions during probing.
* *
* Tune and Adjust * Tune and Adjust
* - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc.
* - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset.

4
config/examples/Anet/A8/Configuration.h
View file

@ -966,14 +966,14 @@
* X and Y offset * X and Y offset
* Use a caliper or ruler to measure the distance from the tip of * Use a caliper or ruler to measure the distance from the tip of
* the Nozzle to the center-point of the Probe in the X and Y axes. * the Nozzle to the center-point of the Probe in the X and Y axes.
* *
* Z offset * Z offset
* - For the Z offset use your best known value and adjust at runtime. * - For the Z offset use your best known value and adjust at runtime.
* - Common probes trigger below the nozzle and have negative values for Z offset. * - Common probes trigger below the nozzle and have negative values for Z offset.
* - Probes triggering above the nozzle height are uncommon but do exist. When using * - Probes triggering above the nozzle height are uncommon but do exist. When using
* probes such as this, carefully set Z_CLEARANCE_DEPLOY_PROBE and Z_CLEARANCE_BETWEEN_PROBES * probes such as this, carefully set Z_CLEARANCE_DEPLOY_PROBE and Z_CLEARANCE_BETWEEN_PROBES
* to avoid collisions during probing. * to avoid collisions during probing.
* *
* Tune and Adjust * Tune and Adjust
* - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc.
* - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset.

4
config/examples/Anet/A8plus/Configuration.h
View file

@ -965,14 +965,14 @@
* X and Y offset * X and Y offset
* Use a caliper or ruler to measure the distance from the tip of * Use a caliper or ruler to measure the distance from the tip of
* the Nozzle to the center-point of the Probe in the X and Y axes. * the Nozzle to the center-point of the Probe in the X and Y axes.
* *
* Z offset * Z offset
* - For the Z offset use your best known value and adjust at runtime. * - For the Z offset use your best known value and adjust at runtime.
* - Common probes trigger below the nozzle and have negative values for Z offset. * - Common probes trigger below the nozzle and have negative values for Z offset.
* - Probes triggering above the nozzle height are uncommon but do exist. When using * - Probes triggering above the nozzle height are uncommon but do exist. When using
* probes such as this, carefully set Z_CLEARANCE_DEPLOY_PROBE and Z_CLEARANCE_BETWEEN_PROBES * probes such as this, carefully set Z_CLEARANCE_DEPLOY_PROBE and Z_CLEARANCE_BETWEEN_PROBES
* to avoid collisions during probing. * to avoid collisions during probing.
* *
* Tune and Adjust * Tune and Adjust
* - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc.
* - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset.

4
config/examples/Anet/A9/Configuration.h
View file

@ -963,14 +963,14 @@
* X and Y offset * X and Y offset
* Use a caliper or ruler to measure the distance from the tip of * Use a caliper or ruler to measure the distance from the tip of
* the Nozzle to the center-point of the Probe in the X and Y axes. * the Nozzle to the center-point of the Probe in the X and Y axes.
* *
* Z offset * Z offset
* - For the Z offset use your best known value and adjust at runtime. * - For the Z offset use your best known value and adjust at runtime.
* - Common probes trigger below the nozzle and have negative values for Z offset. * - Common probes trigger below the nozzle and have negative values for Z offset.
* - Probes triggering above the nozzle height are uncommon but do exist. When using * - Probes triggering above the nozzle height are uncommon but do exist. When using
* probes such as this, carefully set Z_CLEARANCE_DEPLOY_PROBE and Z_CLEARANCE_BETWEEN_PROBES * probes such as this, carefully set Z_CLEARANCE_DEPLOY_PROBE and Z_CLEARANCE_BETWEEN_PROBES
* to avoid collisions during probing. * to avoid collisions during probing.
* *
* Tune and Adjust * Tune and Adjust
* - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc.
* - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset.

4
config/examples/Anet/E10/Configuration.h
View file

@ -963,14 +963,14 @@
* X and Y offset * X and Y offset
* Use a caliper or ruler to measure the distance from the tip of * Use a caliper or ruler to measure the distance from the tip of
* the Nozzle to the center-point of the Probe in the X and Y axes. * the Nozzle to the center-point of the Probe in the X and Y axes.
* *
* Z offset * Z offset
* - For the Z offset use your best known value and adjust at runtime. * - For the Z offset use your best known value and adjust at runtime.
* - Common probes trigger below the nozzle and have negative values for Z offset. * - Common probes trigger below the nozzle and have negative values for Z offset.
* - Probes triggering above the nozzle height are uncommon but do exist. When using * - Probes triggering above the nozzle height are uncommon but do exist. When using
* probes such as this, carefully set Z_CLEARANCE_DEPLOY_PROBE and Z_CLEARANCE_BETWEEN_PROBES * probes such as this, carefully set Z_CLEARANCE_DEPLOY_PROBE and Z_CLEARANCE_BETWEEN_PROBES
* to avoid collisions during probing. * to avoid collisions during probing.
* *
* Tune and Adjust * Tune and Adjust
* - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc.
* - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset.

4
config/examples/Anet/E16/BTT SKR 1.3/Configuration.h
View file

@ -965,14 +965,14 @@
* X and Y offset * X and Y offset
* Use a caliper or ruler to measure the distance from the tip of * Use a caliper or ruler to measure the distance from the tip of
* the Nozzle to the center-point of the Probe in the X and Y axes. * the Nozzle to the center-point of the Probe in the X and Y axes.
* *
* Z offset * Z offset
* - For the Z offset use your best known value and adjust at runtime. * - For the Z offset use your best known value and adjust at runtime.
* - Common probes trigger below the nozzle and have negative values for Z offset. * - Common probes trigger below the nozzle and have negative values for Z offset.
* - Probes triggering above the nozzle height are uncommon but do exist. When using * - Probes triggering above the nozzle height are uncommon but do exist. When using
* probes such as this, carefully set Z_CLEARANCE_DEPLOY_PROBE and Z_CLEARANCE_BETWEEN_PROBES * probes such as this, carefully set Z_CLEARANCE_DEPLOY_PROBE and Z_CLEARANCE_BETWEEN_PROBES
* to avoid collisions during probing. * to avoid collisions during probing.
* *
* Tune and Adjust * Tune and Adjust
* - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc.
* - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset.

4
config/examples/Anet/E16/Stock/Configuration.h
View file

@ -965,14 +965,14 @@
* X and Y offset * X and Y offset
* Use a caliper or ruler to measure the distance from the tip of * Use a caliper or ruler to measure the distance from the tip of
* the Nozzle to the center-point of the Probe in the X and Y axes. * the Nozzle to the center-point of the Probe in the X and Y axes.
* *
* Z offset * Z offset
* - For the Z offset use your best known value and adjust at runtime. * - For the Z offset use your best known value and adjust at runtime.
* - Common probes trigger below the nozzle and have negative values for Z offset. * - Common probes trigger below the nozzle and have negative values for Z offset.
* - Probes triggering above the nozzle height are uncommon but do exist. When using * - Probes triggering above the nozzle height are uncommon but do exist. When using
* probes such as this, carefully set Z_CLEARANCE_DEPLOY_PROBE and Z_CLEARANCE_BETWEEN_PROBES * probes such as this, carefully set Z_CLEARANCE_DEPLOY_PROBE and Z_CLEARANCE_BETWEEN_PROBES
* to avoid collisions during probing. * to avoid collisions during probing.
* *
* Tune and Adjust * Tune and Adjust
* - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc.
* - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset.

6
config/examples/Anet/ET4+/Configuration.h
View file

@ -618,7 +618,7 @@
#define USE_ZMIN_PLUG #define USE_ZMIN_PLUG
//#define USE_XMAX_PLUG //#define USE_XMAX_PLUG
//#define USE_YMAX_PLUG //#define USE_YMAX_PLUG
#define USE_ZMAX_PLUG #define USE_ZMAX_PLUG
// Enable pullup for all endstops to prevent a floating state // Enable pullup for all endstops to prevent a floating state
#define ENDSTOPPULLUPS #define ENDSTOPPULLUPS
@ -963,14 +963,14 @@
* X and Y offset * X and Y offset
* Use a caliper or ruler to measure the distance from the tip of * Use a caliper or ruler to measure the distance from the tip of
* the Nozzle to the center-point of the Probe in the X and Y axes. * the Nozzle to the center-point of the Probe in the X and Y axes.
* *
* Z offset * Z offset
* - For the Z offset use your best known value and adjust at runtime. * - For the Z offset use your best known value and adjust at runtime.
* - Common probes trigger below the nozzle and have negative values for Z offset. * - Common probes trigger below the nozzle and have negative values for Z offset.
* - Probes triggering above the nozzle height are uncommon but do exist. When using * - Probes triggering above the nozzle height are uncommon but do exist. When using
* probes such as this, carefully set Z_CLEARANCE_DEPLOY_PROBE and Z_CLEARANCE_BETWEEN_PROBES * probes such as this, carefully set Z_CLEARANCE_DEPLOY_PROBE and Z_CLEARANCE_BETWEEN_PROBES
* to avoid collisions during probing. * to avoid collisions during probing.
* *
* Tune and Adjust * Tune and Adjust
* - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc.
* - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset.

4
config/examples/Anet/ET4-Pro/Configuration.h
View file

@ -963,14 +963,14 @@
* X and Y offset * X and Y offset
* Use a caliper or ruler to measure the distance from the tip of * Use a caliper or ruler to measure the distance from the tip of
* the Nozzle to the center-point of the Probe in the X and Y axes. * the Nozzle to the center-point of the Probe in the X and Y axes.
* *
* Z offset * Z offset
* - For the Z offset use your best known value and adjust at runtime. * - For the Z offset use your best known value and adjust at runtime.
* - Common probes trigger below the nozzle and have negative values for Z offset. * - Common probes trigger below the nozzle and have negative values for Z offset.
* - Probes triggering above the nozzle height are uncommon but do exist. When using * - Probes triggering above the nozzle height are uncommon but do exist. When using
* probes such as this, carefully set Z_CLEARANCE_DEPLOY_PROBE and Z_CLEARANCE_BETWEEN_PROBES * probes such as this, carefully set Z_CLEARANCE_DEPLOY_PROBE and Z_CLEARANCE_BETWEEN_PROBES
* to avoid collisions during probing. * to avoid collisions during probing.
* *
* Tune and Adjust * Tune and Adjust
* - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc.
* - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset.

4
config/examples/Anet/ET4/Configuration.h
View file

@ -969,14 +969,14 @@
* X and Y offset * X and Y offset
* Use a caliper or ruler to measure the distance from the tip of * Use a caliper or ruler to measure the distance from the tip of
* the Nozzle to the center-point of the Probe in the X and Y axes. * the Nozzle to the center-point of the Probe in the X and Y axes.
* *
* Z offset * Z offset
* - For the Z offset use your best known value and adjust at runtime. * - For the Z offset use your best known value and adjust at runtime.
* - Common probes trigger below the nozzle and have negative values for Z offset. * - Common probes trigger below the nozzle and have negative values for Z offset.
* - Probes triggering above the nozzle height are uncommon but do exist. When using * - Probes triggering above the nozzle height are uncommon but do exist. When using
* probes such as this, carefully set Z_CLEARANCE_DEPLOY_PROBE and Z_CLEARANCE_BETWEEN_PROBES * probes such as this, carefully set Z_CLEARANCE_DEPLOY_PROBE and Z_CLEARANCE_BETWEEN_PROBES
* to avoid collisions during probing. * to avoid collisions during probing.
* *
* Tune and Adjust * Tune and Adjust
* - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc.
* - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset.

4
config/examples/Anet/ET4X/Configuration.h
View file

@ -963,14 +963,14 @@
* X and Y offset * X and Y offset
* Use a caliper or ruler to measure the distance from the tip of * Use a caliper or ruler to measure the distance from the tip of
* the Nozzle to the center-point of the Probe in the X and Y axes. * the Nozzle to the center-point of the Probe in the X and Y axes.
* *
* Z offset * Z offset
* - For the Z offset use your best known value and adjust at runtime. * - For the Z offset use your best known value and adjust at runtime.
* - Common probes trigger below the nozzle and have negative values for Z offset. * - Common probes trigger below the nozzle and have negative values for Z offset.
* - Probes triggering above the nozzle height are uncommon but do exist. When using * - Probes triggering above the nozzle height are uncommon but do exist. When using
* probes such as this, carefully set Z_CLEARANCE_DEPLOY_PROBE and Z_CLEARANCE_BETWEEN_PROBES * probes such as this, carefully set Z_CLEARANCE_DEPLOY_PROBE and Z_CLEARANCE_BETWEEN_PROBES
* to avoid collisions during probing. * to avoid collisions during probing.
* *
* Tune and Adjust * Tune and Adjust
* - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc.
* - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset.

4
config/examples/AnyCubic/Chiron/Configuration.h
View file

@ -967,14 +967,14 @@
* X and Y offset * X and Y offset
* Use a caliper or ruler to measure the distance from the tip of * Use a caliper or ruler to measure the distance from the tip of
* the Nozzle to the center-point of the Probe in the X and Y axes. * the Nozzle to the center-point of the Probe in the X and Y axes.
* *
* Z offset * Z offset
* - For the Z offset use your best known value and adjust at runtime. * - For the Z offset use your best known value and adjust at runtime.
* - Common probes trigger below the nozzle and have negative values for Z offset. * - Common probes trigger below the nozzle and have negative values for Z offset.
* - Probes triggering above the nozzle height are uncommon but do exist. When using * - Probes triggering above the nozzle height are uncommon but do exist. When using
* probes such as this, carefully set Z_CLEARANCE_DEPLOY_PROBE and Z_CLEARANCE_BETWEEN_PROBES * probes such as this, carefully set Z_CLEARANCE_DEPLOY_PROBE and Z_CLEARANCE_BETWEEN_PROBES
* to avoid collisions during probing. * to avoid collisions during probing.
* *
* Tune and Adjust * Tune and Adjust
* - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc.
* - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset.

4
config/examples/AnyCubic/Mega Zero/Anycubic V1/Configuration.h
View file

@ -965,14 +965,14 @@
* X and Y offset * X and Y offset
* Use a caliper or ruler to measure the distance from the tip of * Use a caliper or ruler to measure the distance from the tip of
* the Nozzle to the center-point of the Probe in the X and Y axes. * the Nozzle to the center-point of the Probe in the X and Y axes.
* *
* Z offset * Z offset
* - For the Z offset use your best known value and adjust at runtime. * - For the Z offset use your best known value and adjust at runtime.
* - Common probes trigger below the nozzle and have negative values for Z offset. * - Common probes trigger below the nozzle and have negative values for Z offset.
* - Probes triggering above the nozzle height are uncommon but do exist. When using * - Probes triggering above the nozzle height are uncommon but do exist. When using
* probes such as this, carefully set Z_CLEARANCE_DEPLOY_PROBE and Z_CLEARANCE_BETWEEN_PROBES * probes such as this, carefully set Z_CLEARANCE_DEPLOY_PROBE and Z_CLEARANCE_BETWEEN_PROBES
* to avoid collisions during probing. * to avoid collisions during probing.
* *
* Tune and Adjust * Tune and Adjust
* - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc.
* - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset.

4
config/examples/AnyCubic/Mega Zero/BigTreeTech SKR Mini MZ V1.0/Configuration.h
View file

@ -963,14 +963,14 @@
* X and Y offset * X and Y offset
* Use a caliper or ruler to measure the distance from the tip of * Use a caliper or ruler to measure the distance from the tip of
* the Nozzle to the center-point of the Probe in the X and Y axes. * the Nozzle to the center-point of the Probe in the X and Y axes.
* *
* Z offset * Z offset
* - For the Z offset use your best known value and adjust at runtime. * - For the Z offset use your best known value and adjust at runtime.
* - Common probes trigger below the nozzle and have negative values for Z offset. * - Common probes trigger below the nozzle and have negative values for Z offset.
* - Probes triggering above the nozzle height are uncommon but do exist. When using * - Probes triggering above the nozzle height are uncommon but do exist. When using
* probes such as this, carefully set Z_CLEARANCE_DEPLOY_PROBE and Z_CLEARANCE_BETWEEN_PROBES * probes such as this, carefully set Z_CLEARANCE_DEPLOY_PROBE and Z_CLEARANCE_BETWEEN_PROBES
* to avoid collisions during probing. * to avoid collisions during probing.
* *
* Tune and Adjust * Tune and Adjust
* - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc.
* - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset.

4
config/examples/AnyCubic/i3 Mega/Configuration.h
View file

@ -977,14 +977,14 @@
* X and Y offset * X and Y offset
* Use a caliper or ruler to measure the distance from the tip of * Use a caliper or ruler to measure the distance from the tip of
* the Nozzle to the center-point of the Probe in the X and Y axes. * the Nozzle to the center-point of the Probe in the X and Y axes.
* *
* Z offset * Z offset
* - For the Z offset use your best known value and adjust at runtime. * - For the Z offset use your best known value and adjust at runtime.
* - Common probes trigger below the nozzle and have negative values for Z offset. * - Common probes trigger below the nozzle and have negative values for Z offset.
* - Probes triggering above the nozzle height are uncommon but do exist. When using * - Probes triggering above the nozzle height are uncommon but do exist. When using
* probes such as this, carefully set Z_CLEARANCE_DEPLOY_PROBE and Z_CLEARANCE_BETWEEN_PROBES * probes such as this, carefully set Z_CLEARANCE_DEPLOY_PROBE and Z_CLEARANCE_BETWEEN_PROBES
* to avoid collisions during probing. * to avoid collisions during probing.
* *
* Tune and Adjust * Tune and Adjust
* - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc.
* - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset.

4
config/examples/AnyCubic/i3/Configuration.h
View file

@ -963,14 +963,14 @@
* X and Y offset * X and Y offset
* Use a caliper or ruler to measure the distance from the tip of * Use a caliper or ruler to measure the distance from the tip of
* the Nozzle to the center-point of the Probe in the X and Y axes. * the Nozzle to the center-point of the Probe in the X and Y axes.
* *
* Z offset * Z offset
* - For the Z offset use your best known value and adjust at runtime. * - For the Z offset use your best known value and adjust at runtime.
* - Common probes trigger below the nozzle and have negative values for Z offset. * - Common probes trigger below the nozzle and have negative values for Z offset.
* - Probes triggering above the nozzle height are uncommon but do exist. When using * - Probes triggering above the nozzle height are uncommon but do exist. When using
* probes such as this, carefully set Z_CLEARANCE_DEPLOY_PROBE and Z_CLEARANCE_BETWEEN_PROBES * probes such as this, carefully set Z_CLEARANCE_DEPLOY_PROBE and Z_CLEARANCE_BETWEEN_PROBES
* to avoid collisions during probing. * to avoid collisions during probing.
* *
* Tune and Adjust * Tune and Adjust
* - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc.
* - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset.

4
config/examples/ArmEd/Configuration.h
View file

@ -964,14 +964,14 @@
* X and Y offset * X and Y offset
* Use a caliper or ruler to measure the distance from the tip of * Use a caliper or ruler to measure the distance from the tip of
* the Nozzle to the center-point of the Probe in the X and Y axes. * the Nozzle to the center-point of the Probe in the X and Y axes.
* *
* Z offset * Z offset
* - For the Z offset use your best known value and adjust at runtime. * - For the Z offset use your best known value and adjust at runtime.
* - Common probes trigger below the nozzle and have negative values for Z offset. * - Common probes trigger below the nozzle and have negative values for Z offset.
* - Probes triggering above the nozzle height are uncommon but do exist. When using * - Probes triggering above the nozzle height are uncommon but do exist. When using
* probes such as this, carefully set Z_CLEARANCE_DEPLOY_PROBE and Z_CLEARANCE_BETWEEN_PROBES * probes such as this, carefully set Z_CLEARANCE_DEPLOY_PROBE and Z_CLEARANCE_BETWEEN_PROBES
* to avoid collisions during probing. * to avoid collisions during probing.
* *
* Tune and Adjust * Tune and Adjust
* - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc.
* - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset.

4
config/examples/Artillery/Genius/Configuration.h
View file

@ -963,14 +963,14 @@
* X and Y offset * X and Y offset
* Use a caliper or ruler to measure the distance from the tip of * Use a caliper or ruler to measure the distance from the tip of
* the Nozzle to the center-point of the Probe in the X and Y axes. * the Nozzle to the center-point of the Probe in the X and Y axes.
* *
* Z offset * Z offset
* - For the Z offset use your best known value and adjust at runtime. * - For the Z offset use your best known value and adjust at runtime.
* - Common probes trigger below the nozzle and have negative values for Z offset. * - Common probes trigger below the nozzle and have negative values for Z offset.
* - Probes triggering above the nozzle height are uncommon but do exist. When using * - Probes triggering above the nozzle height are uncommon but do exist. When using
* probes such as this, carefully set Z_CLEARANCE_DEPLOY_PROBE and Z_CLEARANCE_BETWEEN_PROBES * probes such as this, carefully set Z_CLEARANCE_DEPLOY_PROBE and Z_CLEARANCE_BETWEEN_PROBES
* to avoid collisions during probing. * to avoid collisions during probing.
* *
* Tune and Adjust * Tune and Adjust
* - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc.
* - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset.

4
config/examples/Artillery/Sidewinder X1/Configuration.h
View file

@ -963,14 +963,14 @@
* X and Y offset * X and Y offset
* Use a caliper or ruler to measure the distance from the tip of * Use a caliper or ruler to measure the distance from the tip of
* the Nozzle to the center-point of the Probe in the X and Y axes. * the Nozzle to the center-point of the Probe in the X and Y axes.
* *
* Z offset * Z offset
* - For the Z offset use your best known value and adjust at runtime. * - For the Z offset use your best known value and adjust at runtime.
* - Common probes trigger below the nozzle and have negative values for Z offset. * - Common probes trigger below the nozzle and have negative values for Z offset.
* - Probes triggering above the nozzle height are uncommon but do exist. When using * - Probes triggering above the nozzle height are uncommon but do exist. When using
* probes such as this, carefully set Z_CLEARANCE_DEPLOY_PROBE and Z_CLEARANCE_BETWEEN_PROBES * probes such as this, carefully set Z_CLEARANCE_DEPLOY_PROBE and Z_CLEARANCE_BETWEEN_PROBES
* to avoid collisions during probing. * to avoid collisions during probing.
* *
* Tune and Adjust * Tune and Adjust
* - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc.
* - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset.

4
config/examples/Artillery/Sidewinder X1_0.9_degree_BMG_E3D_V6/Configuration.h
View file

@ -979,14 +979,14 @@
* X and Y offset * X and Y offset
* Use a caliper or ruler to measure the distance from the tip of * Use a caliper or ruler to measure the distance from the tip of
* the Nozzle to the center-point of the Probe in the X and Y axes. * the Nozzle to the center-point of the Probe in the X and Y axes.
* *
* Z offset * Z offset
* - For the Z offset use your best known value and adjust at runtime. * - For the Z offset use your best known value and adjust at runtime.
* - Common probes trigger below the nozzle and have negative values for Z offset. * - Common probes trigger below the nozzle and have negative values for Z offset.
* - Probes triggering above the nozzle height are uncommon but do exist. When using * - Probes triggering above the nozzle height are uncommon but do exist. When using
* probes such as this, carefully set Z_CLEARANCE_DEPLOY_PROBE and Z_CLEARANCE_BETWEEN_PROBES * probes such as this, carefully set Z_CLEARANCE_DEPLOY_PROBE and Z_CLEARANCE_BETWEEN_PROBES
* to avoid collisions during probing. * to avoid collisions during probing.
* *
* Tune and Adjust * Tune and Adjust
* - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc.
* - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset.

4
config/examples/Azteeg/X5GT/Configuration.h
View file

@ -963,14 +963,14 @@
* X and Y offset * X and Y offset
* Use a caliper or ruler to measure the distance from the tip of * Use a caliper or ruler to measure the distance from the tip of
* the Nozzle to the center-point of the Probe in the X and Y axes. * the Nozzle to the center-point of the Probe in the X and Y axes.
* *
* Z offset * Z offset
* - For the Z offset use your best known value and adjust at runtime. * - For the Z offset use your best known value and adjust at runtime.
* - Common probes trigger below the nozzle and have negative values for Z offset. * - Common probes trigger below the nozzle and have negative values for Z offset.
* - Probes triggering above the nozzle height are uncommon but do exist. When using * - Probes triggering above the nozzle height are uncommon but do exist. When using
* probes such as this, carefully set Z_CLEARANCE_DEPLOY_PROBE and Z_CLEARANCE_BETWEEN_PROBES * probes such as this, carefully set Z_CLEARANCE_DEPLOY_PROBE and Z_CLEARANCE_BETWEEN_PROBES
* to avoid collisions during probing. * to avoid collisions during probing.
* *
* Tune and Adjust * Tune and Adjust
* - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc.
* - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset.

4
config/examples/BIBO/TouchX/cyclops/Configuration.h
View file

@ -963,14 +963,14 @@
* X and Y offset * X and Y offset
* Use a caliper or ruler to measure the distance from the tip of * Use a caliper or ruler to measure the distance from the tip of
* the Nozzle to the center-point of the Probe in the X and Y axes. * the Nozzle to the center-point of the Probe in the X and Y axes.
* *
* Z offset * Z offset
* - For the Z offset use your best known value and adjust at runtime. * - For the Z offset use your best known value and adjust at runtime.
* - Common probes trigger below the nozzle and have negative values for Z offset. * - Common probes trigger below the nozzle and have negative values for Z offset.
* - Probes triggering above the nozzle height are uncommon but do exist. When using * - Probes triggering above the nozzle height are uncommon but do exist. When using
* probes such as this, carefully set Z_CLEARANCE_DEPLOY_PROBE and Z_CLEARANCE_BETWEEN_PROBES * probes such as this, carefully set Z_CLEARANCE_DEPLOY_PROBE and Z_CLEARANCE_BETWEEN_PROBES
* to avoid collisions during probing. * to avoid collisions during probing.
* *
* Tune and Adjust * Tune and Adjust
* - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc.
* - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset.

4
config/examples/BIBO/TouchX/default/Configuration.h
View file

@ -963,14 +963,14 @@
* X and Y offset * X and Y offset
* Use a caliper or ruler to measure the distance from the tip of * Use a caliper or ruler to measure the distance from the tip of
* the Nozzle to the center-point of the Probe in the X and Y axes. * the Nozzle to the center-point of the Probe in the X and Y axes.
* *
* Z offset * Z offset
* - For the Z offset use your best known value and adjust at runtime. * - For the Z offset use your best known value and adjust at runtime.
* - Common probes trigger below the nozzle and have negative values for Z offset. * - Common probes trigger below the nozzle and have negative values for Z offset.
* - Probes triggering above the nozzle height are uncommon but do exist. When using * - Probes triggering above the nozzle height are uncommon but do exist. When using
* probes such as this, carefully set Z_CLEARANCE_DEPLOY_PROBE and Z_CLEARANCE_BETWEEN_PROBES * probes such as this, carefully set Z_CLEARANCE_DEPLOY_PROBE and Z_CLEARANCE_BETWEEN_PROBES
* to avoid collisions during probing. * to avoid collisions during probing.
* *
* Tune and Adjust * Tune and Adjust
* - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc.
* - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset.

4
config/examples/BIQU/B1-BLTouch/Configuration.h
View file

@ -963,14 +963,14 @@
* X and Y offset * X and Y offset
* Use a caliper or ruler to measure the distance from the tip of * Use a caliper or ruler to measure the distance from the tip of
* the Nozzle to the center-point of the Probe in the X and Y axes. * the Nozzle to the center-point of the Probe in the X and Y axes.
* *
* Z offset * Z offset
* - For the Z offset use your best known value and adjust at runtime. * - For the Z offset use your best known value and adjust at runtime.
* - Common probes trigger below the nozzle and have negative values for Z offset. * - Common probes trigger below the nozzle and have negative values for Z offset.
* - Probes triggering above the nozzle height are uncommon but do exist. When using * - Probes triggering above the nozzle height are uncommon but do exist. When using
* probes such as this, carefully set Z_CLEARANCE_DEPLOY_PROBE and Z_CLEARANCE_BETWEEN_PROBES * probes such as this, carefully set Z_CLEARANCE_DEPLOY_PROBE and Z_CLEARANCE_BETWEEN_PROBES
* to avoid collisions during probing. * to avoid collisions during probing.
* *
* Tune and Adjust * Tune and Adjust
* - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc.
* - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset.

4
config/examples/BIQU/B1/Configuration.h
View file

@ -963,14 +963,14 @@
* X and Y offset * X and Y offset
* Use a caliper or ruler to measure the distance from the tip of * Use a caliper or ruler to measure the distance from the tip of
* the Nozzle to the center-point of the Probe in the X and Y axes. * the Nozzle to the center-point of the Probe in the X and Y axes.
* *
* Z offset * Z offset
* - For the Z offset use your best known value and adjust at runtime. * - For the Z offset use your best known value and adjust at runtime.
* - Common probes trigger below the nozzle and have negative values for Z offset. * - Common probes trigger below the nozzle and have negative values for Z offset.
* - Probes triggering above the nozzle height are uncommon but do exist. When using * - Probes triggering above the nozzle height are uncommon but do exist. When using
* probes such as this, carefully set Z_CLEARANCE_DEPLOY_PROBE and Z_CLEARANCE_BETWEEN_PROBES * probes such as this, carefully set Z_CLEARANCE_DEPLOY_PROBE and Z_CLEARANCE_BETWEEN_PROBES
* to avoid collisions during probing. * to avoid collisions during probing.
* *
* Tune and Adjust * Tune and Adjust
* - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc.
* - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset.

4
config/examples/BQ/Hephestos/Configuration.h
View file

@ -964,14 +964,14 @@
* X and Y offset * X and Y offset
* Use a caliper or ruler to measure the distance from the tip of * Use a caliper or ruler to measure the distance from the tip of
* the Nozzle to the center-point of the Probe in the X and Y axes. * the Nozzle to the center-point of the Probe in the X and Y axes.
* *
* Z offset * Z offset
* - For the Z offset use your best known value and adjust at runtime. * - For the Z offset use your best known value and adjust at runtime.
* - Common probes trigger below the nozzle and have negative values for Z offset. * - Common probes trigger below the nozzle and have negative values for Z offset.
* - Probes triggering above the nozzle height are uncommon but do exist. When using * - Probes triggering above the nozzle height are uncommon but do exist. When using
* probes such as this, carefully set Z_CLEARANCE_DEPLOY_PROBE and Z_CLEARANCE_BETWEEN_PROBES * probes such as this, carefully set Z_CLEARANCE_DEPLOY_PROBE and Z_CLEARANCE_BETWEEN_PROBES
* to avoid collisions during probing. * to avoid collisions during probing.
* *
* Tune and Adjust * Tune and Adjust
* - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc.
* - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset.

4
config/examples/BQ/Hephestos_2/Configuration.h
View file

@ -977,14 +977,14 @@
* X and Y offset * X and Y offset
* Use a caliper or ruler to measure the distance from the tip of * Use a caliper or ruler to measure the distance from the tip of
* the Nozzle to the center-point of the Probe in the X and Y axes. * the Nozzle to the center-point of the Probe in the X and Y axes.
* *
* Z offset * Z offset
* - For the Z offset use your best known value and adjust at runtime. * - For the Z offset use your best known value and adjust at runtime.
* - Common probes trigger below the nozzle and have negative values for Z offset. * - Common probes trigger below the nozzle and have negative values for Z offset.
* - Probes triggering above the nozzle height are uncommon but do exist. When using * - Probes triggering above the nozzle height are uncommon but do exist. When using
* probes such as this, carefully set Z_CLEARANCE_DEPLOY_PROBE and Z_CLEARANCE_BETWEEN_PROBES * probes such as this, carefully set Z_CLEARANCE_DEPLOY_PROBE and Z_CLEARANCE_BETWEEN_PROBES
* to avoid collisions during probing. * to avoid collisions during probing.
* *
* Tune and Adjust * Tune and Adjust
* - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc.
* - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset.

4
config/examples/BQ/WITBOX/Configuration.h
View file

@ -964,14 +964,14 @@
* X and Y offset * X and Y offset
* Use a caliper or ruler to measure the distance from the tip of * Use a caliper or ruler to measure the distance from the tip of
* the Nozzle to the center-point of the Probe in the X and Y axes. * the Nozzle to the center-point of the Probe in the X and Y axes.
* *
* Z offset * Z offset
* - For the Z offset use your best known value and adjust at runtime. * - For the Z offset use your best known value and adjust at runtime.
* - Common probes trigger below the nozzle and have negative values for Z offset. * - Common probes trigger below the nozzle and have negative values for Z offset.
* - Probes triggering above the nozzle height are uncommon but do exist. When using * - Probes triggering above the nozzle height are uncommon but do exist. When using
* probes such as this, carefully set Z_CLEARANCE_DEPLOY_PROBE and Z_CLEARANCE_BETWEEN_PROBES * probes such as this, carefully set Z_CLEARANCE_DEPLOY_PROBE and Z_CLEARANCE_BETWEEN_PROBES
* to avoid collisions during probing. * to avoid collisions during probing.
* *
* Tune and Adjust * Tune and Adjust
* - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc.
* - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset.

4
config/examples/CTC/i3 2560 Rev A/no probe/Configuration.h
View file

@ -964,14 +964,14 @@
* X and Y offset * X and Y offset
* Use a caliper or ruler to measure the distance from the tip of * Use a caliper or ruler to measure the distance from the tip of
* the Nozzle to the center-point of the Probe in the X and Y axes. * the Nozzle to the center-point of the Probe in the X and Y axes.
* *
* Z offset * Z offset
* - For the Z offset use your best known value and adjust at runtime. * - For the Z offset use your best known value and adjust at runtime.
* - Common probes trigger below the nozzle and have negative values for Z offset. * - Common probes trigger below the nozzle and have negative values for Z offset.
* - Probes triggering above the nozzle height are uncommon but do exist. When using * - Probes triggering above the nozzle height are uncommon but do exist. When using
* probes such as this, carefully set Z_CLEARANCE_DEPLOY_PROBE and Z_CLEARANCE_BETWEEN_PROBES * probes such as this, carefully set Z_CLEARANCE_DEPLOY_PROBE and Z_CLEARANCE_BETWEEN_PROBES
* to avoid collisions during probing. * to avoid collisions during probing.
* *
* Tune and Adjust * Tune and Adjust
* - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc.
* - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset.

4
config/examples/Cartesio/Configuration.h
View file

@ -979,14 +979,14 @@
* X and Y offset * X and Y offset
* Use a caliper or ruler to measure the distance from the tip of * Use a caliper or ruler to measure the distance from the tip of
* the Nozzle to the center-point of the Probe in the X and Y axes. * the Nozzle to the center-point of the Probe in the X and Y axes.
* *
* Z offset * Z offset
* - For the Z offset use your best known value and adjust at runtime. * - For the Z offset use your best known value and adjust at runtime.
* - Common probes trigger below the nozzle and have negative values for Z offset. * - Common probes trigger below the nozzle and have negative values for Z offset.
* - Probes triggering above the nozzle height are uncommon but do exist. When using * - Probes triggering above the nozzle height are uncommon but do exist. When using
* probes such as this, carefully set Z_CLEARANCE_DEPLOY_PROBE and Z_CLEARANCE_BETWEEN_PROBES * probes such as this, carefully set Z_CLEARANCE_DEPLOY_PROBE and Z_CLEARANCE_BETWEEN_PROBES
* to avoid collisions during probing. * to avoid collisions during probing.
* *
* Tune and Adjust * Tune and Adjust
* - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc.
* - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset.

4
config/examples/Copymaster3D/300/Configuration.h
View file

@ -964,14 +964,14 @@
* X and Y offset * X and Y offset
* Use a caliper or ruler to measure the distance from the tip of * Use a caliper or ruler to measure the distance from the tip of
* the Nozzle to the center-point of the Probe in the X and Y axes. * the Nozzle to the center-point of the Probe in the X and Y axes.
* *
* Z offset * Z offset
* - For the Z offset use your best known value and adjust at runtime. * - For the Z offset use your best known value and adjust at runtime.
* - Common probes trigger below the nozzle and have negative values for Z offset. * - Common probes trigger below the nozzle and have negative values for Z offset.
* - Probes triggering above the nozzle height are uncommon but do exist. When using * - Probes triggering above the nozzle height are uncommon but do exist. When using
* probes such as this, carefully set Z_CLEARANCE_DEPLOY_PROBE and Z_CLEARANCE_BETWEEN_PROBES * probes such as this, carefully set Z_CLEARANCE_DEPLOY_PROBE and Z_CLEARANCE_BETWEEN_PROBES
* to avoid collisions during probing. * to avoid collisions during probing.
* *
* Tune and Adjust * Tune and Adjust
* - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc.
* - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset.

4
config/examples/Copymaster3D/400/Configuration.h
View file

@ -963,14 +963,14 @@
* X and Y offset * X and Y offset
* Use a caliper or ruler to measure the distance from the tip of * Use a caliper or ruler to measure the distance from the tip of
* the Nozzle to the center-point of the Probe in the X and Y axes. * the Nozzle to the center-point of the Probe in the X and Y axes.
* *
* Z offset * Z offset
* - For the Z offset use your best known value and adjust at runtime. * - For the Z offset use your best known value and adjust at runtime.
* - Common probes trigger below the nozzle and have negative values for Z offset. * - Common probes trigger below the nozzle and have negative values for Z offset.
* - Probes triggering above the nozzle height are uncommon but do exist. When using * - Probes triggering above the nozzle height are uncommon but do exist. When using
* probes such as this, carefully set Z_CLEARANCE_DEPLOY_PROBE and Z_CLEARANCE_BETWEEN_PROBES * probes such as this, carefully set Z_CLEARANCE_DEPLOY_PROBE and Z_CLEARANCE_BETWEEN_PROBES
* to avoid collisions during probing. * to avoid collisions during probing.
* *
* Tune and Adjust * Tune and Adjust
* - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc.
* - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset.

4
config/examples/Copymaster3D/500/Configuration.h
View file

@ -964,14 +964,14 @@
* X and Y offset * X and Y offset
* Use a caliper or ruler to measure the distance from the tip of * Use a caliper or ruler to measure the distance from the tip of
* the Nozzle to the center-point of the Probe in the X and Y axes. * the Nozzle to the center-point of the Probe in the X and Y axes.
* *
* Z offset * Z offset
* - For the Z offset use your best known value and adjust at runtime. * - For the Z offset use your best known value and adjust at runtime.
* - Common probes trigger below the nozzle and have negative values for Z offset. * - Common probes trigger below the nozzle and have negative values for Z offset.
* - Probes triggering above the nozzle height are uncommon but do exist. When using * - Probes triggering above the nozzle height are uncommon but do exist. When using
* probes such as this, carefully set Z_CLEARANCE_DEPLOY_PROBE and Z_CLEARANCE_BETWEEN_PROBES * probes such as this, carefully set Z_CLEARANCE_DEPLOY_PROBE and Z_CLEARANCE_BETWEEN_PROBES
* to avoid collisions during probing. * to avoid collisions during probing.
* *
* Tune and Adjust * Tune and Adjust
* - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc.
* - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset.

4
config/examples/Creality/CR-10 Mini/CrealityV1/Configuration.h
View file

@ -972,14 +972,14 @@
* X and Y offset * X and Y offset
* Use a caliper or ruler to measure the distance from the tip of * Use a caliper or ruler to measure the distance from the tip of
* the Nozzle to the center-point of the Probe in the X and Y axes. * the Nozzle to the center-point of the Probe in the X and Y axes.
* *
* Z offset * Z offset
* - For the Z offset use your best known value and adjust at runtime. * - For the Z offset use your best known value and adjust at runtime.
* - Common probes trigger below the nozzle and have negative values for Z offset. * - Common probes trigger below the nozzle and have negative values for Z offset.
* - Probes triggering above the nozzle height are uncommon but do exist. When using * - Probes triggering above the nozzle height are uncommon but do exist. When using
* probes such as this, carefully set Z_CLEARANCE_DEPLOY_PROBE and Z_CLEARANCE_BETWEEN_PROBES * probes such as this, carefully set Z_CLEARANCE_DEPLOY_PROBE and Z_CLEARANCE_BETWEEN_PROBES
* to avoid collisions during probing. * to avoid collisions during probing.
* *
* Tune and Adjust * Tune and Adjust
* - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc.
* - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset.

4
config/examples/Creality/CR-10 Mini/MEEB-3DP/Configuration.h
View file

@ -963,14 +963,14 @@
* X and Y offset * X and Y offset
* Use a caliper or ruler to measure the distance from the tip of * Use a caliper or ruler to measure the distance from the tip of
* the Nozzle to the center-point of the Probe in the X and Y axes. * the Nozzle to the center-point of the Probe in the X and Y axes.
* *
* Z offset * Z offset
* - For the Z offset use your best known value and adjust at runtime. * - For the Z offset use your best known value and adjust at runtime.
* - Common probes trigger below the nozzle and have negative values for Z offset. * - Common probes trigger below the nozzle and have negative values for Z offset.
* - Probes triggering above the nozzle height are uncommon but do exist. When using * - Probes triggering above the nozzle height are uncommon but do exist. When using
* probes such as this, carefully set Z_CLEARANCE_DEPLOY_PROBE and Z_CLEARANCE_BETWEEN_PROBES * probes such as this, carefully set Z_CLEARANCE_DEPLOY_PROBE and Z_CLEARANCE_BETWEEN_PROBES
* to avoid collisions during probing. * to avoid collisions during probing.
* *
* Tune and Adjust * Tune and Adjust
* - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc.
* - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset.

4
config/examples/Creality/CR-10 S4/CrealityV1/Configuration.h
View file

@ -964,14 +964,14 @@
* X and Y offset * X and Y offset
* Use a caliper or ruler to measure the distance from the tip of * Use a caliper or ruler to measure the distance from the tip of
* the Nozzle to the center-point of the Probe in the X and Y axes. * the Nozzle to the center-point of the Probe in the X and Y axes.
* *
* Z offset * Z offset
* - For the Z offset use your best known value and adjust at runtime. * - For the Z offset use your best known value and adjust at runtime.
* - Common probes trigger below the nozzle and have negative values for Z offset. * - Common probes trigger below the nozzle and have negative values for Z offset.
* - Probes triggering above the nozzle height are uncommon but do exist. When using * - Probes triggering above the nozzle height are uncommon but do exist. When using
* probes such as this, carefully set Z_CLEARANCE_DEPLOY_PROBE and Z_CLEARANCE_BETWEEN_PROBES * probes such as this, carefully set Z_CLEARANCE_DEPLOY_PROBE and Z_CLEARANCE_BETWEEN_PROBES
* to avoid collisions during probing. * to avoid collisions during probing.
* *
* Tune and Adjust * Tune and Adjust
* - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc.
* - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset.

4
config/examples/Creality/CR-10 S5/CrealityV1/Configuration.h
View file

@ -964,14 +964,14 @@
* X and Y offset * X and Y offset
* Use a caliper or ruler to measure the distance from the tip of * Use a caliper or ruler to measure the distance from the tip of
* the Nozzle to the center-point of the Probe in the X and Y axes. * the Nozzle to the center-point of the Probe in the X and Y axes.
* *
* Z offset * Z offset
* - For the Z offset use your best known value and adjust at runtime. * - For the Z offset use your best known value and adjust at runtime.
* - Common probes trigger below the nozzle and have negative values for Z offset. * - Common probes trigger below the nozzle and have negative values for Z offset.
* - Probes triggering above the nozzle height are uncommon but do exist. When using * - Probes triggering above the nozzle height are uncommon but do exist. When using
* probes such as this, carefully set Z_CLEARANCE_DEPLOY_PROBE and Z_CLEARANCE_BETWEEN_PROBES * probes such as this, carefully set Z_CLEARANCE_DEPLOY_PROBE and Z_CLEARANCE_BETWEEN_PROBES
* to avoid collisions during probing. * to avoid collisions during probing.
* *
* Tune and Adjust * Tune and Adjust
* - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc.
* - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset.

4
config/examples/Creality/CR-10 V2/Configuration.h
View file

@ -978,14 +978,14 @@
* X and Y offset * X and Y offset
* Use a caliper or ruler to measure the distance from the tip of * Use a caliper or ruler to measure the distance from the tip of
* the Nozzle to the center-point of the Probe in the X and Y axes. * the Nozzle to the center-point of the Probe in the X and Y axes.
* *
* Z offset * Z offset
* - For the Z offset use your best known value and adjust at runtime. * - For the Z offset use your best known value and adjust at runtime.
* - Common probes trigger below the nozzle and have negative values for Z offset. * - Common probes trigger below the nozzle and have negative values for Z offset.
* - Probes triggering above the nozzle height are uncommon but do exist. When using * - Probes triggering above the nozzle height are uncommon but do exist. When using
* probes such as this, carefully set Z_CLEARANCE_DEPLOY_PROBE and Z_CLEARANCE_BETWEEN_PROBES * probes such as this, carefully set Z_CLEARANCE_DEPLOY_PROBE and Z_CLEARANCE_BETWEEN_PROBES
* to avoid collisions during probing. * to avoid collisions during probing.
* *
* Tune and Adjust * Tune and Adjust
* - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc.
* - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset.

4
config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 2.0/Configuration.h
View file

@ -962,14 +962,14 @@
* X and Y offset * X and Y offset
* Use a caliper or ruler to measure the distance from the tip of * Use a caliper or ruler to measure the distance from the tip of
* the Nozzle to the center-point of the Probe in the X and Y axes. * the Nozzle to the center-point of the Probe in the X and Y axes.
* *
* Z offset * Z offset
* - For the Z offset use your best known value and adjust at runtime. * - For the Z offset use your best known value and adjust at runtime.
* - Common probes trigger below the nozzle and have negative values for Z offset. * - Common probes trigger below the nozzle and have negative values for Z offset.
* - Probes triggering above the nozzle height are uncommon but do exist. When using * - Probes triggering above the nozzle height are uncommon but do exist. When using
* probes such as this, carefully set Z_CLEARANCE_DEPLOY_PROBE and Z_CLEARANCE_BETWEEN_PROBES * probes such as this, carefully set Z_CLEARANCE_DEPLOY_PROBE and Z_CLEARANCE_BETWEEN_PROBES
* to avoid collisions during probing. * to avoid collisions during probing.
* *
* Tune and Adjust * Tune and Adjust
* - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc.
* - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset.

4
config/examples/Creality/CR-10/CrealityV1/Configuration.h
View file

@ -963,14 +963,14 @@
* X and Y offset * X and Y offset
* Use a caliper or ruler to measure the distance from the tip of * Use a caliper or ruler to measure the distance from the tip of
* the Nozzle to the center-point of the Probe in the X and Y axes. * the Nozzle to the center-point of the Probe in the X and Y axes.
* *
* Z offset * Z offset
* - For the Z offset use your best known value and adjust at runtime. * - For the Z offset use your best known value and adjust at runtime.
* - Common probes trigger below the nozzle and have negative values for Z offset. * - Common probes trigger below the nozzle and have negative values for Z offset.
* - Probes triggering above the nozzle height are uncommon but do exist. When using * - Probes triggering above the nozzle height are uncommon but do exist. When using
* probes such as this, carefully set Z_CLEARANCE_DEPLOY_PROBE and Z_CLEARANCE_BETWEEN_PROBES * probes such as this, carefully set Z_CLEARANCE_DEPLOY_PROBE and Z_CLEARANCE_BETWEEN_PROBES
* to avoid collisions during probing. * to avoid collisions during probing.
* *
* Tune and Adjust * Tune and Adjust
* - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc.
* - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset.

4
config/examples/Creality/CR-10S/BigTreeTech SKR Mini E3 2.0/Configuration.h
View file

@ -964,14 +964,14 @@
* X and Y offset * X and Y offset
* Use a caliper or ruler to measure the distance from the tip of * Use a caliper or ruler to measure the distance from the tip of
* the Nozzle to the center-point of the Probe in the X and Y axes. * the Nozzle to the center-point of the Probe in the X and Y axes.
* *
* Z offset * Z offset
* - For the Z offset use your best known value and adjust at runtime. * - For the Z offset use your best known value and adjust at runtime.
* - Common probes trigger below the nozzle and have negative values for Z offset. * - Common probes trigger below the nozzle and have negative values for Z offset.
* - Probes triggering above the nozzle height are uncommon but do exist. When using * - Probes triggering above the nozzle height are uncommon but do exist. When using
* probes such as this, carefully set Z_CLEARANCE_DEPLOY_PROBE and Z_CLEARANCE_BETWEEN_PROBES * probes such as this, carefully set Z_CLEARANCE_DEPLOY_PROBE and Z_CLEARANCE_BETWEEN_PROBES
* to avoid collisions during probing. * to avoid collisions during probing.
* *
* Tune and Adjust * Tune and Adjust
* - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc.
* - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset.

4
config/examples/Creality/CR-10S/CrealityV1/Configuration.h
View file

@ -963,14 +963,14 @@
* X and Y offset * X and Y offset
* Use a caliper or ruler to measure the distance from the tip of * Use a caliper or ruler to measure the distance from the tip of
* the Nozzle to the center-point of the Probe in the X and Y axes. * the Nozzle to the center-point of the Probe in the X and Y axes.
* *
* Z offset * Z offset
* - For the Z offset use your best known value and adjust at runtime. * - For the Z offset use your best known value and adjust at runtime.
* - Common probes trigger below the nozzle and have negative values for Z offset. * - Common probes trigger below the nozzle and have negative values for Z offset.
* - Probes triggering above the nozzle height are uncommon but do exist. When using * - Probes triggering above the nozzle height are uncommon but do exist. When using
* probes such as this, carefully set Z_CLEARANCE_DEPLOY_PROBE and Z_CLEARANCE_BETWEEN_PROBES * probes such as this, carefully set Z_CLEARANCE_DEPLOY_PROBE and Z_CLEARANCE_BETWEEN_PROBES
* to avoid collisions during probing. * to avoid collisions during probing.
* *
* Tune and Adjust * Tune and Adjust
* - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc.
* - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset.

4
config/examples/Creality/CR-20 Pro/Configuration.h
View file

@ -964,14 +964,14 @@
* X and Y offset * X and Y offset
* Use a caliper or ruler to measure the distance from the tip of * Use a caliper or ruler to measure the distance from the tip of
* the Nozzle to the center-point of the Probe in the X and Y axes. * the Nozzle to the center-point of the Probe in the X and Y axes.
* *
* Z offset * Z offset
* - For the Z offset use your best known value and adjust at runtime. * - For the Z offset use your best known value and adjust at runtime.
* - Common probes trigger below the nozzle and have negative values for Z offset. * - Common probes trigger below the nozzle and have negative values for Z offset.
* - Probes triggering above the nozzle height are uncommon but do exist. When using * - Probes triggering above the nozzle height are uncommon but do exist. When using
* probes such as this, carefully set Z_CLEARANCE_DEPLOY_PROBE and Z_CLEARANCE_BETWEEN_PROBES * probes such as this, carefully set Z_CLEARANCE_DEPLOY_PROBE and Z_CLEARANCE_BETWEEN_PROBES
* to avoid collisions during probing. * to avoid collisions during probing.
* *
* Tune and Adjust * Tune and Adjust
* - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc.
* - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset.

4
config/examples/Creality/CR-20/Configuration.h
View file

@ -964,14 +964,14 @@
* X and Y offset * X and Y offset
* Use a caliper or ruler to measure the distance from the tip of * Use a caliper or ruler to measure the distance from the tip of
* the Nozzle to the center-point of the Probe in the X and Y axes. * the Nozzle to the center-point of the Probe in the X and Y axes.
* *
* Z offset * Z offset
* - For the Z offset use your best known value and adjust at runtime. * - For the Z offset use your best known value and adjust at runtime.
* - Common probes trigger below the nozzle and have negative values for Z offset. * - Common probes trigger below the nozzle and have negative values for Z offset.
* - Probes triggering above the nozzle height are uncommon but do exist. When using * - Probes triggering above the nozzle height are uncommon but do exist. When using
* probes such as this, carefully set Z_CLEARANCE_DEPLOY_PROBE and Z_CLEARANCE_BETWEEN_PROBES * probes such as this, carefully set Z_CLEARANCE_DEPLOY_PROBE and Z_CLEARANCE_BETWEEN_PROBES
* to avoid collisions during probing. * to avoid collisions during probing.
* *
* Tune and Adjust * Tune and Adjust
* - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc.
* - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset.

4
config/examples/Creality/CR-6 SE/Configuration.h
View file

@ -963,14 +963,14 @@
* X and Y offset * X and Y offset
* Use a caliper or ruler to measure the distance from the tip of * Use a caliper or ruler to measure the distance from the tip of
* the Nozzle to the center-point of the Probe in the X and Y axes. * the Nozzle to the center-point of the Probe in the X and Y axes.
* *
* Z offset * Z offset
* - For the Z offset use your best known value and adjust at runtime. * - For the Z offset use your best known value and adjust at runtime.
* - Common probes trigger below the nozzle and have negative values for Z offset. * - Common probes trigger below the nozzle and have negative values for Z offset.
* - Probes triggering above the nozzle height are uncommon but do exist. When using * - Probes triggering above the nozzle height are uncommon but do exist. When using
* probes such as this, carefully set Z_CLEARANCE_DEPLOY_PROBE and Z_CLEARANCE_BETWEEN_PROBES * probes such as this, carefully set Z_CLEARANCE_DEPLOY_PROBE and Z_CLEARANCE_BETWEEN_PROBES
* to avoid collisions during probing. * to avoid collisions during probing.
* *
* Tune and Adjust * Tune and Adjust
* - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc.
* - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset.

4
config/examples/Creality/CR-8/Configuration.h
View file

@ -963,14 +963,14 @@
* X and Y offset * X and Y offset
* Use a caliper or ruler to measure the distance from the tip of * Use a caliper or ruler to measure the distance from the tip of
* the Nozzle to the center-point of the Probe in the X and Y axes. * the Nozzle to the center-point of the Probe in the X and Y axes.
* *
* Z offset * Z offset
* - For the Z offset use your best known value and adjust at runtime. * - For the Z offset use your best known value and adjust at runtime.
* - Common probes trigger below the nozzle and have negative values for Z offset. * - Common probes trigger below the nozzle and have negative values for Z offset.
* - Probes triggering above the nozzle height are uncommon but do exist. When using * - Probes triggering above the nozzle height are uncommon but do exist. When using
* probes such as this, carefully set Z_CLEARANCE_DEPLOY_PROBE and Z_CLEARANCE_BETWEEN_PROBES * probes such as this, carefully set Z_CLEARANCE_DEPLOY_PROBE and Z_CLEARANCE_BETWEEN_PROBES
* to avoid collisions during probing. * to avoid collisions during probing.
* *
* Tune and Adjust * Tune and Adjust
* - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc.
* - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset.

4
config/examples/Creality/Ender-2/Configuration.h
View file

@ -964,14 +964,14 @@
* X and Y offset * X and Y offset
* Use a caliper or ruler to measure the distance from the tip of * Use a caliper or ruler to measure the distance from the tip of
* the Nozzle to the center-point of the Probe in the X and Y axes. * the Nozzle to the center-point of the Probe in the X and Y axes.
* *
* Z offset * Z offset
* - For the Z offset use your best known value and adjust at runtime. * - For the Z offset use your best known value and adjust at runtime.
* - Common probes trigger below the nozzle and have negative values for Z offset. * - Common probes trigger below the nozzle and have negative values for Z offset.
* - Probes triggering above the nozzle height are uncommon but do exist. When using * - Probes triggering above the nozzle height are uncommon but do exist. When using
* probes such as this, carefully set Z_CLEARANCE_DEPLOY_PROBE and Z_CLEARANCE_BETWEEN_PROBES * probes such as this, carefully set Z_CLEARANCE_DEPLOY_PROBE and Z_CLEARANCE_BETWEEN_PROBES
* to avoid collisions during probing. * to avoid collisions during probing.
* *
* Tune and Adjust * Tune and Adjust
* - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc.
* - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset.

4
config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.0/Configuration.h
View file

@ -963,14 +963,14 @@
* X and Y offset * X and Y offset
* Use a caliper or ruler to measure the distance from the tip of * Use a caliper or ruler to measure the distance from the tip of
* the Nozzle to the center-point of the Probe in the X and Y axes. * the Nozzle to the center-point of the Probe in the X and Y axes.
* *
* Z offset * Z offset
* - For the Z offset use your best known value and adjust at runtime. * - For the Z offset use your best known value and adjust at runtime.
* - Common probes trigger below the nozzle and have negative values for Z offset. * - Common probes trigger below the nozzle and have negative values for Z offset.
* - Probes triggering above the nozzle height are uncommon but do exist. When using * - Probes triggering above the nozzle height are uncommon but do exist. When using
* probes such as this, carefully set Z_CLEARANCE_DEPLOY_PROBE and Z_CLEARANCE_BETWEEN_PROBES * probes such as this, carefully set Z_CLEARANCE_DEPLOY_PROBE and Z_CLEARANCE_BETWEEN_PROBES
* to avoid collisions during probing. * to avoid collisions during probing.
* *
* Tune and Adjust * Tune and Adjust
* - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc.
* - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset.

4
config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.2/Configuration.h
View file

@ -963,14 +963,14 @@
* X and Y offset * X and Y offset
* Use a caliper or ruler to measure the distance from the tip of * Use a caliper or ruler to measure the distance from the tip of
* the Nozzle to the center-point of the Probe in the X and Y axes. * the Nozzle to the center-point of the Probe in the X and Y axes.
* *
* Z offset * Z offset
* - For the Z offset use your best known value and adjust at runtime. * - For the Z offset use your best known value and adjust at runtime.
* - Common probes trigger below the nozzle and have negative values for Z offset. * - Common probes trigger below the nozzle and have negative values for Z offset.
* - Probes triggering above the nozzle height are uncommon but do exist. When using * - Probes triggering above the nozzle height are uncommon but do exist. When using
* probes such as this, carefully set Z_CLEARANCE_DEPLOY_PROBE and Z_CLEARANCE_BETWEEN_PROBES * probes such as this, carefully set Z_CLEARANCE_DEPLOY_PROBE and Z_CLEARANCE_BETWEEN_PROBES
* to avoid collisions during probing. * to avoid collisions during probing.
* *
* Tune and Adjust * Tune and Adjust
* - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc.
* - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset.

4
config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 2.0/Configuration.h
View file

@ -963,14 +963,14 @@
* X and Y offset * X and Y offset
* Use a caliper or ruler to measure the distance from the tip of * Use a caliper or ruler to measure the distance from the tip of
* the Nozzle to the center-point of the Probe in the X and Y axes. * the Nozzle to the center-point of the Probe in the X and Y axes.
* *
* Z offset * Z offset
* - For the Z offset use your best known value and adjust at runtime. * - For the Z offset use your best known value and adjust at runtime.
* - Common probes trigger below the nozzle and have negative values for Z offset. * - Common probes trigger below the nozzle and have negative values for Z offset.
* - Probes triggering above the nozzle height are uncommon but do exist. When using * - Probes triggering above the nozzle height are uncommon but do exist. When using
* probes such as this, carefully set Z_CLEARANCE_DEPLOY_PROBE and Z_CLEARANCE_BETWEEN_PROBES * probes such as this, carefully set Z_CLEARANCE_DEPLOY_PROBE and Z_CLEARANCE_BETWEEN_PROBES
* to avoid collisions during probing. * to avoid collisions during probing.
* *
* Tune and Adjust * Tune and Adjust
* - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc.
* - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset.

4
config/examples/Creality/Ender-3 Pro/CrealityV1/Configuration.h
View file

@ -964,14 +964,14 @@
* X and Y offset * X and Y offset
* Use a caliper or ruler to measure the distance from the tip of * Use a caliper or ruler to measure the distance from the tip of
* the Nozzle to the center-point of the Probe in the X and Y axes. * the Nozzle to the center-point of the Probe in the X and Y axes.
* *
* Z offset * Z offset
* - For the Z offset use your best known value and adjust at runtime. * - For the Z offset use your best known value and adjust at runtime.
* - Common probes trigger below the nozzle and have negative values for Z offset. * - Common probes trigger below the nozzle and have negative values for Z offset.
* - Probes triggering above the nozzle height are uncommon but do exist. When using * - Probes triggering above the nozzle height are uncommon but do exist. When using
* probes such as this, carefully set Z_CLEARANCE_DEPLOY_PROBE and Z_CLEARANCE_BETWEEN_PROBES * probes such as this, carefully set Z_CLEARANCE_DEPLOY_PROBE and Z_CLEARANCE_BETWEEN_PROBES
* to avoid collisions during probing. * to avoid collisions during probing.
* *
* Tune and Adjust * Tune and Adjust
* - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc.
* - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset.

4
config/examples/Creality/Ender-3 Pro/CrealityV422/Configuration.h
View file

@ -967,14 +967,14 @@
* X and Y offset * X and Y offset
* Use a caliper or ruler to measure the distance from the tip of * Use a caliper or ruler to measure the distance from the tip of
* the Nozzle to the center-point of the Probe in the X and Y axes. * the Nozzle to the center-point of the Probe in the X and Y axes.
* *
* Z offset * Z offset
* - For the Z offset use your best known value and adjust at runtime. * - For the Z offset use your best known value and adjust at runtime.
* - Common probes trigger below the nozzle and have negative values for Z offset. * - Common probes trigger below the nozzle and have negative values for Z offset.
* - Probes triggering above the nozzle height are uncommon but do exist. When using * - Probes triggering above the nozzle height are uncommon but do exist. When using
* probes such as this, carefully set Z_CLEARANCE_DEPLOY_PROBE and Z_CLEARANCE_BETWEEN_PROBES * probes such as this, carefully set Z_CLEARANCE_DEPLOY_PROBE and Z_CLEARANCE_BETWEEN_PROBES
* to avoid collisions during probing. * to avoid collisions during probing.
* *
* Tune and Adjust * Tune and Adjust
* - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc.
* - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset.

4
config/examples/Creality/Ender-3 Pro/CrealityV427/Configuration.h
View file

@ -964,14 +964,14 @@
* X and Y offset * X and Y offset
* Use a caliper or ruler to measure the distance from the tip of * Use a caliper or ruler to measure the distance from the tip of
* the Nozzle to the center-point of the Probe in the X and Y axes. * the Nozzle to the center-point of the Probe in the X and Y axes.
* *
* Z offset * Z offset
* - For the Z offset use your best known value and adjust at runtime. * - For the Z offset use your best known value and adjust at runtime.
* - Common probes trigger below the nozzle and have negative values for Z offset. * - Common probes trigger below the nozzle and have negative values for Z offset.
* - Probes triggering above the nozzle height are uncommon but do exist. When using * - Probes triggering above the nozzle height are uncommon but do exist. When using
* probes such as this, carefully set Z_CLEARANCE_DEPLOY_PROBE and Z_CLEARANCE_BETWEEN_PROBES * probes such as this, carefully set Z_CLEARANCE_DEPLOY_PROBE and Z_CLEARANCE_BETWEEN_PROBES
* to avoid collisions during probing. * to avoid collisions during probing.
* *
* Tune and Adjust * Tune and Adjust
* - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc.
* - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset.

4
config/examples/Creality/Ender-3 V2/Configuration.h
View file

@ -963,14 +963,14 @@
* X and Y offset * X and Y offset
* Use a caliper or ruler to measure the distance from the tip of * Use a caliper or ruler to measure the distance from the tip of
* the Nozzle to the center-point of the Probe in the X and Y axes. * the Nozzle to the center-point of the Probe in the X and Y axes.
* *
* Z offset * Z offset
* - For the Z offset use your best known value and adjust at runtime. * - For the Z offset use your best known value and adjust at runtime.
* - Common probes trigger below the nozzle and have negative values for Z offset. * - Common probes trigger below the nozzle and have negative values for Z offset.
* - Probes triggering above the nozzle height are uncommon but do exist. When using * - Probes triggering above the nozzle height are uncommon but do exist. When using
* probes such as this, carefully set Z_CLEARANCE_DEPLOY_PROBE and Z_CLEARANCE_BETWEEN_PROBES * probes such as this, carefully set Z_CLEARANCE_DEPLOY_PROBE and Z_CLEARANCE_BETWEEN_PROBES
* to avoid collisions during probing. * to avoid collisions during probing.
* *
* Tune and Adjust * Tune and Adjust
* - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc.
* - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset.

4
config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/2-into-1 Hotend/Configuration.h
View file

@ -962,14 +962,14 @@
* X and Y offset * X and Y offset
* Use a caliper or ruler to measure the distance from the tip of * Use a caliper or ruler to measure the distance from the tip of
* the Nozzle to the center-point of the Probe in the X and Y axes. * the Nozzle to the center-point of the Probe in the X and Y axes.
* *
* Z offset * Z offset
* - For the Z offset use your best known value and adjust at runtime. * - For the Z offset use your best known value and adjust at runtime.
* - Common probes trigger below the nozzle and have negative values for Z offset. * - Common probes trigger below the nozzle and have negative values for Z offset.
* - Probes triggering above the nozzle height are uncommon but do exist. When using * - Probes triggering above the nozzle height are uncommon but do exist. When using
* probes such as this, carefully set Z_CLEARANCE_DEPLOY_PROBE and Z_CLEARANCE_BETWEEN_PROBES * probes such as this, carefully set Z_CLEARANCE_DEPLOY_PROBE and Z_CLEARANCE_BETWEEN_PROBES
* to avoid collisions during probing. * to avoid collisions during probing.
* *
* Tune and Adjust * Tune and Adjust
* - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc.
* - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset.

4
config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Dual Z/Configuration.h
View file

@ -962,14 +962,14 @@
* X and Y offset * X and Y offset
* Use a caliper or ruler to measure the distance from the tip of * Use a caliper or ruler to measure the distance from the tip of
* the Nozzle to the center-point of the Probe in the X and Y axes. * the Nozzle to the center-point of the Probe in the X and Y axes.
* *
* Z offset * Z offset
* - For the Z offset use your best known value and adjust at runtime. * - For the Z offset use your best known value and adjust at runtime.
* - Common probes trigger below the nozzle and have negative values for Z offset. * - Common probes trigger below the nozzle and have negative values for Z offset.
* - Probes triggering above the nozzle height are uncommon but do exist. When using * - Probes triggering above the nozzle height are uncommon but do exist. When using
* probes such as this, carefully set Z_CLEARANCE_DEPLOY_PROBE and Z_CLEARANCE_BETWEEN_PROBES * probes such as this, carefully set Z_CLEARANCE_DEPLOY_PROBE and Z_CLEARANCE_BETWEEN_PROBES
* to avoid collisions during probing. * to avoid collisions during probing.
* *
* Tune and Adjust * Tune and Adjust
* - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc.
* - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset.

4
config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Single Extruder/Configuration.h
View file

@ -962,14 +962,14 @@
* X and Y offset * X and Y offset
* Use a caliper or ruler to measure the distance from the tip of * Use a caliper or ruler to measure the distance from the tip of
* the Nozzle to the center-point of the Probe in the X and Y axes. * the Nozzle to the center-point of the Probe in the X and Y axes.
* *
* Z offset * Z offset
* - For the Z offset use your best known value and adjust at runtime. * - For the Z offset use your best known value and adjust at runtime.
* - Common probes trigger below the nozzle and have negative values for Z offset. * - Common probes trigger below the nozzle and have negative values for Z offset.
* - Probes triggering above the nozzle height are uncommon but do exist. When using * - Probes triggering above the nozzle height are uncommon but do exist. When using
* probes such as this, carefully set Z_CLEARANCE_DEPLOY_PROBE and Z_CLEARANCE_BETWEEN_PROBES * probes such as this, carefully set Z_CLEARANCE_DEPLOY_PROBE and Z_CLEARANCE_BETWEEN_PROBES
* to avoid collisions during probing. * to avoid collisions during probing.
* *
* Tune and Adjust * Tune and Adjust
* - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc.
* - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset.

4
config/examples/Creality/Ender-3/BigTreeTech SKR E3-DIP V1.1/Configuration.h
View file

@ -963,14 +963,14 @@
* X and Y offset * X and Y offset
* Use a caliper or ruler to measure the distance from the tip of * Use a caliper or ruler to measure the distance from the tip of
* the Nozzle to the center-point of the Probe in the X and Y axes. * the Nozzle to the center-point of the Probe in the X and Y axes.
* *
* Z offset * Z offset
* - For the Z offset use your best known value and adjust at runtime. * - For the Z offset use your best known value and adjust at runtime.
* - Common probes trigger below the nozzle and have negative values for Z offset. * - Common probes trigger below the nozzle and have negative values for Z offset.
* - Probes triggering above the nozzle height are uncommon but do exist. When using * - Probes triggering above the nozzle height are uncommon but do exist. When using
* probes such as this, carefully set Z_CLEARANCE_DEPLOY_PROBE and Z_CLEARANCE_BETWEEN_PROBES * probes such as this, carefully set Z_CLEARANCE_DEPLOY_PROBE and Z_CLEARANCE_BETWEEN_PROBES
* to avoid collisions during probing. * to avoid collisions during probing.
* *
* Tune and Adjust * Tune and Adjust
* - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc.
* - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset.

4
config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.0/Configuration.h
View file

@ -962,14 +962,14 @@
* X and Y offset * X and Y offset
* Use a caliper or ruler to measure the distance from the tip of * Use a caliper or ruler to measure the distance from the tip of
* the Nozzle to the center-point of the Probe in the X and Y axes. * the Nozzle to the center-point of the Probe in the X and Y axes.
* *
* Z offset * Z offset
* - For the Z offset use your best known value and adjust at runtime. * - For the Z offset use your best known value and adjust at runtime.
* - Common probes trigger below the nozzle and have negative values for Z offset. * - Common probes trigger below the nozzle and have negative values for Z offset.
* - Probes triggering above the nozzle height are uncommon but do exist. When using * - Probes triggering above the nozzle height are uncommon but do exist. When using
* probes such as this, carefully set Z_CLEARANCE_DEPLOY_PROBE and Z_CLEARANCE_BETWEEN_PROBES * probes such as this, carefully set Z_CLEARANCE_DEPLOY_PROBE and Z_CLEARANCE_BETWEEN_PROBES
* to avoid collisions during probing. * to avoid collisions during probing.
* *
* Tune and Adjust * Tune and Adjust
* - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc.
* - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset.

4
config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.2/Configuration.h
View file

@ -962,14 +962,14 @@
* X and Y offset * X and Y offset
* Use a caliper or ruler to measure the distance from the tip of * Use a caliper or ruler to measure the distance from the tip of
* the Nozzle to the center-point of the Probe in the X and Y axes. * the Nozzle to the center-point of the Probe in the X and Y axes.
* *
* Z offset * Z offset
* - For the Z offset use your best known value and adjust at runtime. * - For the Z offset use your best known value and adjust at runtime.
* - Common probes trigger below the nozzle and have negative values for Z offset. * - Common probes trigger below the nozzle and have negative values for Z offset.
* - Probes triggering above the nozzle height are uncommon but do exist. When using * - Probes triggering above the nozzle height are uncommon but do exist. When using
* probes such as this, carefully set Z_CLEARANCE_DEPLOY_PROBE and Z_CLEARANCE_BETWEEN_PROBES * probes such as this, carefully set Z_CLEARANCE_DEPLOY_PROBE and Z_CLEARANCE_BETWEEN_PROBES
* to avoid collisions during probing. * to avoid collisions during probing.
* *
* Tune and Adjust * Tune and Adjust
* - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc.
* - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset.

4
config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 2.0/Configuration.h
View file

@ -962,14 +962,14 @@
* X and Y offset * X and Y offset
* Use a caliper or ruler to measure the distance from the tip of * Use a caliper or ruler to measure the distance from the tip of
* the Nozzle to the center-point of the Probe in the X and Y axes. * the Nozzle to the center-point of the Probe in the X and Y axes.
* *
* Z offset * Z offset
* - For the Z offset use your best known value and adjust at runtime. * - For the Z offset use your best known value and adjust at runtime.
* - Common probes trigger below the nozzle and have negative values for Z offset. * - Common probes trigger below the nozzle and have negative values for Z offset.
* - Probes triggering above the nozzle height are uncommon but do exist. When using * - Probes triggering above the nozzle height are uncommon but do exist. When using
* probes such as this, carefully set Z_CLEARANCE_DEPLOY_PROBE and Z_CLEARANCE_BETWEEN_PROBES * probes such as this, carefully set Z_CLEARANCE_DEPLOY_PROBE and Z_CLEARANCE_BETWEEN_PROBES
* to avoid collisions during probing. * to avoid collisions during probing.
* *
* Tune and Adjust * Tune and Adjust
* - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc.
* - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset.

4
config/examples/Creality/Ender-3/CrealityV1/Configuration.h
View file

@ -964,14 +964,14 @@
* X and Y offset * X and Y offset
* Use a caliper or ruler to measure the distance from the tip of * Use a caliper or ruler to measure the distance from the tip of
* the Nozzle to the center-point of the Probe in the X and Y axes. * the Nozzle to the center-point of the Probe in the X and Y axes.
* *
* Z offset * Z offset
* - For the Z offset use your best known value and adjust at runtime. * - For the Z offset use your best known value and adjust at runtime.
* - Common probes trigger below the nozzle and have negative values for Z offset. * - Common probes trigger below the nozzle and have negative values for Z offset.
* - Probes triggering above the nozzle height are uncommon but do exist. When using * - Probes triggering above the nozzle height are uncommon but do exist. When using
* probes such as this, carefully set Z_CLEARANCE_DEPLOY_PROBE and Z_CLEARANCE_BETWEEN_PROBES * probes such as this, carefully set Z_CLEARANCE_DEPLOY_PROBE and Z_CLEARANCE_BETWEEN_PROBES
* to avoid collisions during probing. * to avoid collisions during probing.
* *
* Tune and Adjust * Tune and Adjust
* - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc.
* - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset.

4
config/examples/Creality/Ender-3/CrealityV422/Configuration.h
View file

@ -970,14 +970,14 @@
* X and Y offset * X and Y offset
* Use a caliper or ruler to measure the distance from the tip of * Use a caliper or ruler to measure the distance from the tip of
* the Nozzle to the center-point of the Probe in the X and Y axes. * the Nozzle to the center-point of the Probe in the X and Y axes.
* *
* Z offset * Z offset
* - For the Z offset use your best known value and adjust at runtime. * - For the Z offset use your best known value and adjust at runtime.
* - Common probes trigger below the nozzle and have negative values for Z offset. * - Common probes trigger below the nozzle and have negative values for Z offset.
* - Probes triggering above the nozzle height are uncommon but do exist. When using * - Probes triggering above the nozzle height are uncommon but do exist. When using
* probes such as this, carefully set Z_CLEARANCE_DEPLOY_PROBE and Z_CLEARANCE_BETWEEN_PROBES * probes such as this, carefully set Z_CLEARANCE_DEPLOY_PROBE and Z_CLEARANCE_BETWEEN_PROBES
* to avoid collisions during probing. * to avoid collisions during probing.
* *
* Tune and Adjust * Tune and Adjust
* - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc.
* - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset.

4
config/examples/Creality/Ender-3/CrealityV427/Configuration.h
View file

@ -970,14 +970,14 @@
* X and Y offset * X and Y offset
* Use a caliper or ruler to measure the distance from the tip of * Use a caliper or ruler to measure the distance from the tip of
* the Nozzle to the center-point of the Probe in the X and Y axes. * the Nozzle to the center-point of the Probe in the X and Y axes.
* *
* Z offset * Z offset
* - For the Z offset use your best known value and adjust at runtime. * - For the Z offset use your best known value and adjust at runtime.
* - Common probes trigger below the nozzle and have negative values for Z offset. * - Common probes trigger below the nozzle and have negative values for Z offset.
* - Probes triggering above the nozzle height are uncommon but do exist. When using * - Probes triggering above the nozzle height are uncommon but do exist. When using
* probes such as this, carefully set Z_CLEARANCE_DEPLOY_PROBE and Z_CLEARANCE_BETWEEN_PROBES * probes such as this, carefully set Z_CLEARANCE_DEPLOY_PROBE and Z_CLEARANCE_BETWEEN_PROBES
* to avoid collisions during probing. * to avoid collisions during probing.
* *
* Tune and Adjust * Tune and Adjust
* - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc.
* - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset.

4
config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/BLTouch/Configuration.h
View file

@ -964,14 +964,14 @@
* X and Y offset * X and Y offset
* Use a caliper or ruler to measure the distance from the tip of * Use a caliper or ruler to measure the distance from the tip of
* the Nozzle to the center-point of the Probe in the X and Y axes. * the Nozzle to the center-point of the Probe in the X and Y axes.
* *
* Z offset * Z offset
* - For the Z offset use your best known value and adjust at runtime. * - For the Z offset use your best known value and adjust at runtime.
* - Common probes trigger below the nozzle and have negative values for Z offset. * - Common probes trigger below the nozzle and have negative values for Z offset.
* - Probes triggering above the nozzle height are uncommon but do exist. When using * - Probes triggering above the nozzle height are uncommon but do exist. When using
* probes such as this, carefully set Z_CLEARANCE_DEPLOY_PROBE and Z_CLEARANCE_BETWEEN_PROBES * probes such as this, carefully set Z_CLEARANCE_DEPLOY_PROBE and Z_CLEARANCE_BETWEEN_PROBES
* to avoid collisions during probing. * to avoid collisions during probing.
* *
* Tune and Adjust * Tune and Adjust
* - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc.
* - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset.

4
config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/base/Configuration.h
View file

@ -964,14 +964,14 @@
* X and Y offset * X and Y offset
* Use a caliper or ruler to measure the distance from the tip of * Use a caliper or ruler to measure the distance from the tip of
* the Nozzle to the center-point of the Probe in the X and Y axes. * the Nozzle to the center-point of the Probe in the X and Y axes.
* *
* Z offset * Z offset
* - For the Z offset use your best known value and adjust at runtime. * - For the Z offset use your best known value and adjust at runtime.
* - Common probes trigger below the nozzle and have negative values for Z offset. * - Common probes trigger below the nozzle and have negative values for Z offset.
* - Probes triggering above the nozzle height are uncommon but do exist. When using * - Probes triggering above the nozzle height are uncommon but do exist. When using
* probes such as this, carefully set Z_CLEARANCE_DEPLOY_PROBE and Z_CLEARANCE_BETWEEN_PROBES * probes such as this, carefully set Z_CLEARANCE_DEPLOY_PROBE and Z_CLEARANCE_BETWEEN_PROBES
* to avoid collisions during probing. * to avoid collisions during probing.
* *
* Tune and Adjust * Tune and Adjust
* - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc.
* - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset.

4
config/examples/Creality/Ender-3/FYSETC Cheetah/BLTouch/Configuration.h
View file

@ -964,14 +964,14 @@
* X and Y offset * X and Y offset
* Use a caliper or ruler to measure the distance from the tip of * Use a caliper or ruler to measure the distance from the tip of
* the Nozzle to the center-point of the Probe in the X and Y axes. * the Nozzle to the center-point of the Probe in the X and Y axes.
* *
* Z offset * Z offset
* - For the Z offset use your best known value and adjust at runtime. * - For the Z offset use your best known value and adjust at runtime.
* - Common probes trigger below the nozzle and have negative values for Z offset. * - Common probes trigger below the nozzle and have negative values for Z offset.
* - Probes triggering above the nozzle height are uncommon but do exist. When using * - Probes triggering above the nozzle height are uncommon but do exist. When using
* probes such as this, carefully set Z_CLEARANCE_DEPLOY_PROBE and Z_CLEARANCE_BETWEEN_PROBES * probes such as this, carefully set Z_CLEARANCE_DEPLOY_PROBE and Z_CLEARANCE_BETWEEN_PROBES
* to avoid collisions during probing. * to avoid collisions during probing.
* *
* Tune and Adjust * Tune and Adjust
* - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc.
* - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset.

4
config/examples/Creality/Ender-3/FYSETC Cheetah/base/Configuration.h
View file

@ -964,14 +964,14 @@
* X and Y offset * X and Y offset
* Use a caliper or ruler to measure the distance from the tip of * Use a caliper or ruler to measure the distance from the tip of
* the Nozzle to the center-point of the Probe in the X and Y axes. * the Nozzle to the center-point of the Probe in the X and Y axes.
* *
* Z offset * Z offset
* - For the Z offset use your best known value and adjust at runtime. * - For the Z offset use your best known value and adjust at runtime.
* - Common probes trigger below the nozzle and have negative values for Z offset. * - Common probes trigger below the nozzle and have negative values for Z offset.
* - Probes triggering above the nozzle height are uncommon but do exist. When using * - Probes triggering above the nozzle height are uncommon but do exist. When using
* probes such as this, carefully set Z_CLEARANCE_DEPLOY_PROBE and Z_CLEARANCE_BETWEEN_PROBES * probes such as this, carefully set Z_CLEARANCE_DEPLOY_PROBE and Z_CLEARANCE_BETWEEN_PROBES
* to avoid collisions during probing. * to avoid collisions during probing.
* *
* Tune and Adjust * Tune and Adjust
* - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc.
* - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset.

4
config/examples/Creality/Ender-3/MEEB-3DP/Configuration.h
View file

@ -969,14 +969,14 @@
* X and Y offset * X and Y offset
* Use a caliper or ruler to measure the distance from the tip of * Use a caliper or ruler to measure the distance from the tip of
* the Nozzle to the center-point of the Probe in the X and Y axes. * the Nozzle to the center-point of the Probe in the X and Y axes.
* *
* Z offset * Z offset
* - For the Z offset use your best known value and adjust at runtime. * - For the Z offset use your best known value and adjust at runtime.
* - Common probes trigger below the nozzle and have negative values for Z offset. * - Common probes trigger below the nozzle and have negative values for Z offset.
* - Probes triggering above the nozzle height are uncommon but do exist. When using * - Probes triggering above the nozzle height are uncommon but do exist. When using
* probes such as this, carefully set Z_CLEARANCE_DEPLOY_PROBE and Z_CLEARANCE_BETWEEN_PROBES * probes such as this, carefully set Z_CLEARANCE_DEPLOY_PROBE and Z_CLEARANCE_BETWEEN_PROBES
* to avoid collisions during probing. * to avoid collisions during probing.
* *
* Tune and Adjust * Tune and Adjust
* - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc.
* - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset.

4
config/examples/Creality/Ender-3/MKS Robin E3 1.0/Configuration.h
View file

@ -962,14 +962,14 @@
* X and Y offset * X and Y offset
* Use a caliper or ruler to measure the distance from the tip of * Use a caliper or ruler to measure the distance from the tip of
* the Nozzle to the center-point of the Probe in the X and Y axes. * the Nozzle to the center-point of the Probe in the X and Y axes.
* *
* Z offset * Z offset
* - For the Z offset use your best known value and adjust at runtime. * - For the Z offset use your best known value and adjust at runtime.
* - Common probes trigger below the nozzle and have negative values for Z offset. * - Common probes trigger below the nozzle and have negative values for Z offset.
* - Probes triggering above the nozzle height are uncommon but do exist. When using * - Probes triggering above the nozzle height are uncommon but do exist. When using
* probes such as this, carefully set Z_CLEARANCE_DEPLOY_PROBE and Z_CLEARANCE_BETWEEN_PROBES * probes such as this, carefully set Z_CLEARANCE_DEPLOY_PROBE and Z_CLEARANCE_BETWEEN_PROBES
* to avoid collisions during probing. * to avoid collisions during probing.
* *
* Tune and Adjust * Tune and Adjust
* - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc.
* - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset.

4
config/examples/Creality/Ender-3/MKS Robin E3P/Configuration.h
View file

@ -964,14 +964,14 @@
* X and Y offset * X and Y offset
* Use a caliper or ruler to measure the distance from the tip of * Use a caliper or ruler to measure the distance from the tip of
* the Nozzle to the center-point of the Probe in the X and Y axes. * the Nozzle to the center-point of the Probe in the X and Y axes.
* *
* Z offset * Z offset
* - For the Z offset use your best known value and adjust at runtime. * - For the Z offset use your best known value and adjust at runtime.
* - Common probes trigger below the nozzle and have negative values for Z offset. * - Common probes trigger below the nozzle and have negative values for Z offset.
* - Probes triggering above the nozzle height are uncommon but do exist. When using * - Probes triggering above the nozzle height are uncommon but do exist. When using
* probes such as this, carefully set Z_CLEARANCE_DEPLOY_PROBE and Z_CLEARANCE_BETWEEN_PROBES * probes such as this, carefully set Z_CLEARANCE_DEPLOY_PROBE and Z_CLEARANCE_BETWEEN_PROBES
* to avoid collisions during probing. * to avoid collisions during probing.
* *
* Tune and Adjust * Tune and Adjust
* - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc.
* - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset.

4
config/examples/Creality/Ender-4/Configuration.h
View file

@ -963,14 +963,14 @@
* X and Y offset * X and Y offset
* Use a caliper or ruler to measure the distance from the tip of * Use a caliper or ruler to measure the distance from the tip of
* the Nozzle to the center-point of the Probe in the X and Y axes. * the Nozzle to the center-point of the Probe in the X and Y axes.
* *
* Z offset * Z offset
* - For the Z offset use your best known value and adjust at runtime. * - For the Z offset use your best known value and adjust at runtime.
* - Common probes trigger below the nozzle and have negative values for Z offset. * - Common probes trigger below the nozzle and have negative values for Z offset.
* - Probes triggering above the nozzle height are uncommon but do exist. When using * - Probes triggering above the nozzle height are uncommon but do exist. When using
* probes such as this, carefully set Z_CLEARANCE_DEPLOY_PROBE and Z_CLEARANCE_BETWEEN_PROBES * probes such as this, carefully set Z_CLEARANCE_DEPLOY_PROBE and Z_CLEARANCE_BETWEEN_PROBES
* to avoid collisions during probing. * to avoid collisions during probing.
* *
* Tune and Adjust * Tune and Adjust
* - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc.
* - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset.

4
config/examples/Creality/Ender-5 Plus/Configuration.h
View file

@ -971,14 +971,14 @@
* X and Y offset * X and Y offset
* Use a caliper or ruler to measure the distance from the tip of * Use a caliper or ruler to measure the distance from the tip of
* the Nozzle to the center-point of the Probe in the X and Y axes. * the Nozzle to the center-point of the Probe in the X and Y axes.
* *
* Z offset * Z offset
* - For the Z offset use your best known value and adjust at runtime. * - For the Z offset use your best known value and adjust at runtime.
* - Common probes trigger below the nozzle and have negative values for Z offset. * - Common probes trigger below the nozzle and have negative values for Z offset.
* - Probes triggering above the nozzle height are uncommon but do exist. When using * - Probes triggering above the nozzle height are uncommon but do exist. When using
* probes such as this, carefully set Z_CLEARANCE_DEPLOY_PROBE and Z_CLEARANCE_BETWEEN_PROBES * probes such as this, carefully set Z_CLEARANCE_DEPLOY_PROBE and Z_CLEARANCE_BETWEEN_PROBES
* to avoid collisions during probing. * to avoid collisions during probing.
* *
* Tune and Adjust * Tune and Adjust
* - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc.
* - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset.

4
config/examples/Creality/Ender-5 Pro/BigTreeTech SKR E3 Turbo with BLTouch/Configuration.h
View file

@ -964,14 +964,14 @@
* X and Y offset * X and Y offset
* Use a caliper or ruler to measure the distance from the tip of * Use a caliper or ruler to measure the distance from the tip of
* the Nozzle to the center-point of the Probe in the X and Y axes. * the Nozzle to the center-point of the Probe in the X and Y axes.
* *
* Z offset * Z offset
* - For the Z offset use your best known value and adjust at runtime. * - For the Z offset use your best known value and adjust at runtime.
* - Common probes trigger below the nozzle and have negative values for Z offset. * - Common probes trigger below the nozzle and have negative values for Z offset.
* - Probes triggering above the nozzle height are uncommon but do exist. When using * - Probes triggering above the nozzle height are uncommon but do exist. When using
* probes such as this, carefully set Z_CLEARANCE_DEPLOY_PROBE and Z_CLEARANCE_BETWEEN_PROBES * probes such as this, carefully set Z_CLEARANCE_DEPLOY_PROBE and Z_CLEARANCE_BETWEEN_PROBES
* to avoid collisions during probing. * to avoid collisions during probing.
* *
* Tune and Adjust * Tune and Adjust
* - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc.
* - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset.

4
config/examples/Creality/Ender-5 Pro/BigTreeTech SKR E3 Turbo/Configuration.h
View file

@ -964,14 +964,14 @@
* X and Y offset * X and Y offset
* Use a caliper or ruler to measure the distance from the tip of * Use a caliper or ruler to measure the distance from the tip of
* the Nozzle to the center-point of the Probe in the X and Y axes. * the Nozzle to the center-point of the Probe in the X and Y axes.
* *
* Z offset * Z offset
* - For the Z offset use your best known value and adjust at runtime. * - For the Z offset use your best known value and adjust at runtime.
* - Common probes trigger below the nozzle and have negative values for Z offset. * - Common probes trigger below the nozzle and have negative values for Z offset.
* - Probes triggering above the nozzle height are uncommon but do exist. When using * - Probes triggering above the nozzle height are uncommon but do exist. When using
* probes such as this, carefully set Z_CLEARANCE_DEPLOY_PROBE and Z_CLEARANCE_BETWEEN_PROBES * probes such as this, carefully set Z_CLEARANCE_DEPLOY_PROBE and Z_CLEARANCE_BETWEEN_PROBES
* to avoid collisions during probing. * to avoid collisions during probing.
* *
* Tune and Adjust * Tune and Adjust
* - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc.
* - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset.

4
config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 1.2/Configuration.h
View file

@ -962,14 +962,14 @@
* X and Y offset * X and Y offset
* Use a caliper or ruler to measure the distance from the tip of * Use a caliper or ruler to measure the distance from the tip of
* the Nozzle to the center-point of the Probe in the X and Y axes. * the Nozzle to the center-point of the Probe in the X and Y axes.
* *
* Z offset * Z offset
* - For the Z offset use your best known value and adjust at runtime. * - For the Z offset use your best known value and adjust at runtime.
* - Common probes trigger below the nozzle and have negative values for Z offset. * - Common probes trigger below the nozzle and have negative values for Z offset.
* - Probes triggering above the nozzle height are uncommon but do exist. When using * - Probes triggering above the nozzle height are uncommon but do exist. When using
* probes such as this, carefully set Z_CLEARANCE_DEPLOY_PROBE and Z_CLEARANCE_BETWEEN_PROBES * probes such as this, carefully set Z_CLEARANCE_DEPLOY_PROBE and Z_CLEARANCE_BETWEEN_PROBES
* to avoid collisions during probing. * to avoid collisions during probing.
* *
* Tune and Adjust * Tune and Adjust
* - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc.
* - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset.

4
config/examples/Creality/Ender-5 Pro/CrealityV1/Configuration.h
View file

@ -964,14 +964,14 @@
* X and Y offset * X and Y offset
* Use a caliper or ruler to measure the distance from the tip of * Use a caliper or ruler to measure the distance from the tip of
* the Nozzle to the center-point of the Probe in the X and Y axes. * the Nozzle to the center-point of the Probe in the X and Y axes.
* *
* Z offset * Z offset
* - For the Z offset use your best known value and adjust at runtime. * - For the Z offset use your best known value and adjust at runtime.
* - Common probes trigger below the nozzle and have negative values for Z offset. * - Common probes trigger below the nozzle and have negative values for Z offset.
* - Probes triggering above the nozzle height are uncommon but do exist. When using * - Probes triggering above the nozzle height are uncommon but do exist. When using
* probes such as this, carefully set Z_CLEARANCE_DEPLOY_PROBE and Z_CLEARANCE_BETWEEN_PROBES * probes such as this, carefully set Z_CLEARANCE_DEPLOY_PROBE and Z_CLEARANCE_BETWEEN_PROBES
* to avoid collisions during probing. * to avoid collisions during probing.
* *
* Tune and Adjust * Tune and Adjust
* - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc.
* - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset.

4
config/examples/Creality/Ender-5 Pro/CrealityV422/Configuration.h
View file

@ -964,14 +964,14 @@
* X and Y offset * X and Y offset
* Use a caliper or ruler to measure the distance from the tip of * Use a caliper or ruler to measure the distance from the tip of
* the Nozzle to the center-point of the Probe in the X and Y axes. * the Nozzle to the center-point of the Probe in the X and Y axes.
* *
* Z offset * Z offset
* - For the Z offset use your best known value and adjust at runtime. * - For the Z offset use your best known value and adjust at runtime.
* - Common probes trigger below the nozzle and have negative values for Z offset. * - Common probes trigger below the nozzle and have negative values for Z offset.
* - Probes triggering above the nozzle height are uncommon but do exist. When using * - Probes triggering above the nozzle height are uncommon but do exist. When using
* probes such as this, carefully set Z_CLEARANCE_DEPLOY_PROBE and Z_CLEARANCE_BETWEEN_PROBES * probes such as this, carefully set Z_CLEARANCE_DEPLOY_PROBE and Z_CLEARANCE_BETWEEN_PROBES
* to avoid collisions during probing. * to avoid collisions during probing.
* *
* Tune and Adjust * Tune and Adjust
* - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc.
* - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset.

4
config/examples/Creality/Ender-5 Pro/CrealityV427/Configuration.h
View file

@ -964,14 +964,14 @@
* X and Y offset * X and Y offset
* Use a caliper or ruler to measure the distance from the tip of * Use a caliper or ruler to measure the distance from the tip of
* the Nozzle to the center-point of the Probe in the X and Y axes. * the Nozzle to the center-point of the Probe in the X and Y axes.
* *
* Z offset * Z offset
* - For the Z offset use your best known value and adjust at runtime. * - For the Z offset use your best known value and adjust at runtime.
* - Common probes trigger below the nozzle and have negative values for Z offset. * - Common probes trigger below the nozzle and have negative values for Z offset.
* - Probes triggering above the nozzle height are uncommon but do exist. When using * - Probes triggering above the nozzle height are uncommon but do exist. When using
* probes such as this, carefully set Z_CLEARANCE_DEPLOY_PROBE and Z_CLEARANCE_BETWEEN_PROBES * probes such as this, carefully set Z_CLEARANCE_DEPLOY_PROBE and Z_CLEARANCE_BETWEEN_PROBES
* to avoid collisions during probing. * to avoid collisions during probing.
* *
* Tune and Adjust * Tune and Adjust
* - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc.
* - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset.

4
config/examples/Creality/Ender-5/BigTreeTech SKR 1.4 Turbo (TMC2209)/Configuration.h
View file

@ -993,14 +993,14 @@
* X and Y offset * X and Y offset
* Use a caliper or ruler to measure the distance from the tip of * Use a caliper or ruler to measure the distance from the tip of
* the Nozzle to the center-point of the Probe in the X and Y axes. * the Nozzle to the center-point of the Probe in the X and Y axes.
* *
* Z offset * Z offset
* - For the Z offset use your best known value and adjust at runtime. * - For the Z offset use your best known value and adjust at runtime.
* - Common probes trigger below the nozzle and have negative values for Z offset. * - Common probes trigger below the nozzle and have negative values for Z offset.
* - Probes triggering above the nozzle height are uncommon but do exist. When using * - Probes triggering above the nozzle height are uncommon but do exist. When using
* probes such as this, carefully set Z_CLEARANCE_DEPLOY_PROBE and Z_CLEARANCE_BETWEEN_PROBES * probes such as this, carefully set Z_CLEARANCE_DEPLOY_PROBE and Z_CLEARANCE_BETWEEN_PROBES
* to avoid collisions during probing. * to avoid collisions during probing.
* *
* Tune and Adjust * Tune and Adjust
* - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc.
* - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset.

4
config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo with BLTouch/Configuration.h
View file

@ -964,14 +964,14 @@
* X and Y offset * X and Y offset
* Use a caliper or ruler to measure the distance from the tip of * Use a caliper or ruler to measure the distance from the tip of
* the Nozzle to the center-point of the Probe in the X and Y axes. * the Nozzle to the center-point of the Probe in the X and Y axes.
* *
* Z offset * Z offset
* - For the Z offset use your best known value and adjust at runtime. * - For the Z offset use your best known value and adjust at runtime.
* - Common probes trigger below the nozzle and have negative values for Z offset. * - Common probes trigger below the nozzle and have negative values for Z offset.
* - Probes triggering above the nozzle height are uncommon but do exist. When using * - Probes triggering above the nozzle height are uncommon but do exist. When using
* probes such as this, carefully set Z_CLEARANCE_DEPLOY_PROBE and Z_CLEARANCE_BETWEEN_PROBES * probes such as this, carefully set Z_CLEARANCE_DEPLOY_PROBE and Z_CLEARANCE_BETWEEN_PROBES
* to avoid collisions during probing. * to avoid collisions during probing.
* *
* Tune and Adjust * Tune and Adjust
* - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc.
* - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset.

4
config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo/Configuration.h
View file

@ -964,14 +964,14 @@
* X and Y offset * X and Y offset
* Use a caliper or ruler to measure the distance from the tip of * Use a caliper or ruler to measure the distance from the tip of
* the Nozzle to the center-point of the Probe in the X and Y axes. * the Nozzle to the center-point of the Probe in the X and Y axes.
* *
* Z offset * Z offset
* - For the Z offset use your best known value and adjust at runtime. * - For the Z offset use your best known value and adjust at runtime.
* - Common probes trigger below the nozzle and have negative values for Z offset. * - Common probes trigger below the nozzle and have negative values for Z offset.
* - Probes triggering above the nozzle height are uncommon but do exist. When using * - Probes triggering above the nozzle height are uncommon but do exist. When using
* probes such as this, carefully set Z_CLEARANCE_DEPLOY_PROBE and Z_CLEARANCE_BETWEEN_PROBES * probes such as this, carefully set Z_CLEARANCE_DEPLOY_PROBE and Z_CLEARANCE_BETWEEN_PROBES
* to avoid collisions during probing. * to avoid collisions during probing.
* *
* Tune and Adjust * Tune and Adjust
* - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc.
* - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset.

4
config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 1.2/Configuration.h
View file

@ -962,14 +962,14 @@
* X and Y offset * X and Y offset
* Use a caliper or ruler to measure the distance from the tip of * Use a caliper or ruler to measure the distance from the tip of
* the Nozzle to the center-point of the Probe in the X and Y axes. * the Nozzle to the center-point of the Probe in the X and Y axes.
* *
* Z offset * Z offset
* - For the Z offset use your best known value and adjust at runtime. * - For the Z offset use your best known value and adjust at runtime.
* - Common probes trigger below the nozzle and have negative values for Z offset. * - Common probes trigger below the nozzle and have negative values for Z offset.
* - Probes triggering above the nozzle height are uncommon but do exist. When using * - Probes triggering above the nozzle height are uncommon but do exist. When using
* probes such as this, carefully set Z_CLEARANCE_DEPLOY_PROBE and Z_CLEARANCE_BETWEEN_PROBES * probes such as this, carefully set Z_CLEARANCE_DEPLOY_PROBE and Z_CLEARANCE_BETWEEN_PROBES
* to avoid collisions during probing. * to avoid collisions during probing.
* *
* Tune and Adjust * Tune and Adjust
* - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc.
* - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset.

4
config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 2.0/Configuration.h
View file

@ -962,14 +962,14 @@
* X and Y offset * X and Y offset
* Use a caliper or ruler to measure the distance from the tip of * Use a caliper or ruler to measure the distance from the tip of
* the Nozzle to the center-point of the Probe in the X and Y axes. * the Nozzle to the center-point of the Probe in the X and Y axes.
* *
* Z offset * Z offset
* - For the Z offset use your best known value and adjust at runtime. * - For the Z offset use your best known value and adjust at runtime.
* - Common probes trigger below the nozzle and have negative values for Z offset. * - Common probes trigger below the nozzle and have negative values for Z offset.
* - Probes triggering above the nozzle height are uncommon but do exist. When using * - Probes triggering above the nozzle height are uncommon but do exist. When using
* probes such as this, carefully set Z_CLEARANCE_DEPLOY_PROBE and Z_CLEARANCE_BETWEEN_PROBES * probes such as this, carefully set Z_CLEARANCE_DEPLOY_PROBE and Z_CLEARANCE_BETWEEN_PROBES
* to avoid collisions during probing. * to avoid collisions during probing.
* *
* Tune and Adjust * Tune and Adjust
* - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc.
* - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset.

4
config/examples/Creality/Ender-5/CrealityV1/Configuration.h
View file

@ -964,14 +964,14 @@
* X and Y offset * X and Y offset
* Use a caliper or ruler to measure the distance from the tip of * Use a caliper or ruler to measure the distance from the tip of
* the Nozzle to the center-point of the Probe in the X and Y axes. * the Nozzle to the center-point of the Probe in the X and Y axes.
* *
* Z offset * Z offset
* - For the Z offset use your best known value and adjust at runtime. * - For the Z offset use your best known value and adjust at runtime.
* - Common probes trigger below the nozzle and have negative values for Z offset. * - Common probes trigger below the nozzle and have negative values for Z offset.
* - Probes triggering above the nozzle height are uncommon but do exist. When using * - Probes triggering above the nozzle height are uncommon but do exist. When using
* probes such as this, carefully set Z_CLEARANCE_DEPLOY_PROBE and Z_CLEARANCE_BETWEEN_PROBES * probes such as this, carefully set Z_CLEARANCE_DEPLOY_PROBE and Z_CLEARANCE_BETWEEN_PROBES
* to avoid collisions during probing. * to avoid collisions during probing.
* *
* Tune and Adjust * Tune and Adjust
* - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc.
* - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset.

4
config/examples/Creality/Ender-5/CrealityV427/Configuration.h
View file

@ -964,14 +964,14 @@
* X and Y offset * X and Y offset
* Use a caliper or ruler to measure the distance from the tip of * Use a caliper or ruler to measure the distance from the tip of
* the Nozzle to the center-point of the Probe in the X and Y axes. * the Nozzle to the center-point of the Probe in the X and Y axes.
* *
* Z offset * Z offset
* - For the Z offset use your best known value and adjust at runtime. * - For the Z offset use your best known value and adjust at runtime.
* - Common probes trigger below the nozzle and have negative values for Z offset. * - Common probes trigger below the nozzle and have negative values for Z offset.
* - Probes triggering above the nozzle height are uncommon but do exist. When using * - Probes triggering above the nozzle height are uncommon but do exist. When using
* probes such as this, carefully set Z_CLEARANCE_DEPLOY_PROBE and Z_CLEARANCE_BETWEEN_PROBES * probes such as this, carefully set Z_CLEARANCE_DEPLOY_PROBE and Z_CLEARANCE_BETWEEN_PROBES
* to avoid collisions during probing. * to avoid collisions during probing.
* *
* Tune and Adjust * Tune and Adjust
* - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc.
* - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset.

4
config/examples/Dagoma/Disco Ultimate/Configuration.h
View file

@ -963,14 +963,14 @@
* X and Y offset * X and Y offset
* Use a caliper or ruler to measure the distance from the tip of * Use a caliper or ruler to measure the distance from the tip of
* the Nozzle to the center-point of the Probe in the X and Y axes. * the Nozzle to the center-point of the Probe in the X and Y axes.
* *
* Z offset * Z offset
* - For the Z offset use your best known value and adjust at runtime. * - For the Z offset use your best known value and adjust at runtime.
* - Common probes trigger below the nozzle and have negative values for Z offset. * - Common probes trigger below the nozzle and have negative values for Z offset.
* - Probes triggering above the nozzle height are uncommon but do exist. When using * - Probes triggering above the nozzle height are uncommon but do exist. When using
* probes such as this, carefully set Z_CLEARANCE_DEPLOY_PROBE and Z_CLEARANCE_BETWEEN_PROBES * probes such as this, carefully set Z_CLEARANCE_DEPLOY_PROBE and Z_CLEARANCE_BETWEEN_PROBES
* to avoid collisions during probing. * to avoid collisions during probing.
* *
* Tune and Adjust * Tune and Adjust
* - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc.
* - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset.

4
config/examples/Daycom/3DP-100/Configuration.h
View file

@ -966,14 +966,14 @@
* X and Y offset * X and Y offset
* Use a caliper or ruler to measure the distance from the tip of * Use a caliper or ruler to measure the distance from the tip of
* the Nozzle to the center-point of the Probe in the X and Y axes. * the Nozzle to the center-point of the Probe in the X and Y axes.
* *
* Z offset * Z offset
* - For the Z offset use your best known value and adjust at runtime. * - For the Z offset use your best known value and adjust at runtime.
* - Common probes trigger below the nozzle and have negative values for Z offset. * - Common probes trigger below the nozzle and have negative values for Z offset.
* - Probes triggering above the nozzle height are uncommon but do exist. When using * - Probes triggering above the nozzle height are uncommon but do exist. When using
* probes such as this, carefully set Z_CLEARANCE_DEPLOY_PROBE and Z_CLEARANCE_BETWEEN_PROBES * probes such as this, carefully set Z_CLEARANCE_DEPLOY_PROBE and Z_CLEARANCE_BETWEEN_PROBES
* to avoid collisions during probing. * to avoid collisions during probing.
* *
* Tune and Adjust * Tune and Adjust
* - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc.
* - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset.

4
config/examples/EXP3D/Imprimante multifonction/Configuration.h
View file

@ -963,14 +963,14 @@
* X and Y offset * X and Y offset
* Use a caliper or ruler to measure the distance from the tip of * Use a caliper or ruler to measure the distance from the tip of
* the Nozzle to the center-point of the Probe in the X and Y axes. * the Nozzle to the center-point of the Probe in the X and Y axes.
* *
* Z offset * Z offset
* - For the Z offset use your best known value and adjust at runtime. * - For the Z offset use your best known value and adjust at runtime.
* - Common probes trigger below the nozzle and have negative values for Z offset. * - Common probes trigger below the nozzle and have negative values for Z offset.
* - Probes triggering above the nozzle height are uncommon but do exist. When using * - Probes triggering above the nozzle height are uncommon but do exist. When using
* probes such as this, carefully set Z_CLEARANCE_DEPLOY_PROBE and Z_CLEARANCE_BETWEEN_PROBES * probes such as this, carefully set Z_CLEARANCE_DEPLOY_PROBE and Z_CLEARANCE_BETWEEN_PROBES
* to avoid collisions during probing. * to avoid collisions during probing.
* *
* Tune and Adjust * Tune and Adjust
* - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc. * - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc.
* - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset. * - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset.

Some files were not shown because too many files have changed in this diff Show more