3D-printing/Configurations
1
0
Fork 0
mirror of https://github.com/MarlinFirmware/Configurations.git synced 2025-07-08 07:27:44 -06:00
Code Issues Projects Releases Packages Wiki Activity Actions

🔧 PROBE_OFFSET_WIZARD for LVGL

Browse source 
MarlinFirmware/Marlin#23489
This commit is contained in:
Scott Lahteine 2022-02-01 16:41:46 -06:00
parent 8c8c42522b
commit 18d5a22c6b
272 changed files with 7344 additions and 7888 deletions
Download patch file Download diff file Expand all files Collapse all files

56
config/default/Configuration_adv.h
View file

@ -1280,37 +1280,35 @@
#define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440
#endif #endif
#if HAS_BED_PROBE && EITHER(HAS_MARLINUI_MENU, HAS_TFT_LVGL_UI)
//#define PROBE_OFFSET_WIZARD // Add a Probe Z Offset calibration option to the LCD menu
#if ENABLED(PROBE_OFFSET_WIZARD)
/**
* Enable to init the Probe Z-Offset when starting the Wizard.
* Use a height slightly above the estimated nozzle-to-probe Z offset.
* For example, with an offset of -5, consider a starting height of -4.
*/
//#define PROBE_OFFSET_WIZARD_START_Z -4.0
// Set a convenient position to do the calibration (probing point and nozzle/bed-distance)
//#define PROBE_OFFSET_WIZARD_XY_POS { X_CENTER, Y_CENTER }
#endif
#endif
#if HAS_MARLINUI_MENU #if HAS_MARLINUI_MENU
// Add Probe Z Offset calibration to the Z Probe Offsets menu #if BOTH(HAS_BED_PROBE, AUTO_BED_LEVELING_BILINEAR)
#if HAS_BED_PROBE // Add calibration in the Probe Offsets menu to compensate for X-axis twist.
//#define PROBE_OFFSET_WIZARD //#define X_AXIS_TWIST_COMPENSATION
#if ENABLED(PROBE_OFFSET_WIZARD) #if ENABLED(X_AXIS_TWIST_COMPENSATION)
// /**
// Enable to init the Probe Z-Offset when starting the Wizard. * Enable to init the Probe Z-Offset when starting the Wizard.
// Use a height slightly above the estimated nozzle-to-probe Z offset. * Use a height slightly above the estimated nozzle-to-probe Z offset.
// For example, with an offset of -5, consider a starting height of -4. * For example, with an offset of -5, consider a starting height of -4.
// */
//#define PROBE_OFFSET_WIZARD_START_Z -4.0 #define XATC_START_Z 0.0
#define XATC_MAX_POINTS 3 // Number of points to probe in the wizard
// Set a convenient position to do the calibration (probing point and nozzle/bed-distance) #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe
//#define PROBE_OFFSET_WIZARD_XY_POS { X_CENTER, Y_CENTER }
#endif
#if ENABLED(AUTO_BED_LEVELING_BILINEAR)
// Add a calibration procedure in the Probe Offsets menu
// to compensate for twist in the X-axis.
//#define X_AXIS_TWIST_COMPENSATION
#if ENABLED(X_AXIS_TWIST_COMPENSATION)
/**
* Enable to init the Probe Z-Offset when starting the Wizard.
* Use a height slightly above the estimated nozzle-to-probe Z offset.
* For example, with an offset of -5, consider a starting height of -4.
*/
#define XATC_START_Z 0.0
#define XATC_MAX_POINTS 3 // Number of points to probe in the wizard
#define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe
#endif
#endif #endif
#endif #endif

56
config/examples/3DFabXYZ/Migbot/Configuration_adv.h
View file

@ -1280,37 +1280,35 @@
#define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440
#endif #endif
#if HAS_BED_PROBE && EITHER(HAS_MARLINUI_MENU, HAS_TFT_LVGL_UI)
//#define PROBE_OFFSET_WIZARD // Add a Probe Z Offset calibration option to the LCD menu
#if ENABLED(PROBE_OFFSET_WIZARD)
/**
* Enable to init the Probe Z-Offset when starting the Wizard.
* Use a height slightly above the estimated nozzle-to-probe Z offset.
* For example, with an offset of -5, consider a starting height of -4.
*/
//#define PROBE_OFFSET_WIZARD_START_Z -4.0
// Set a convenient position to do the calibration (probing point and nozzle/bed-distance)
//#define PROBE_OFFSET_WIZARD_XY_POS { X_CENTER, Y_CENTER }
#endif
#endif
#if HAS_MARLINUI_MENU #if HAS_MARLINUI_MENU
// Add Probe Z Offset calibration to the Z Probe Offsets menu #if BOTH(HAS_BED_PROBE, AUTO_BED_LEVELING_BILINEAR)
#if HAS_BED_PROBE // Add calibration in the Probe Offsets menu to compensate for X-axis twist.
//#define PROBE_OFFSET_WIZARD //#define X_AXIS_TWIST_COMPENSATION
#if ENABLED(PROBE_OFFSET_WIZARD) #if ENABLED(X_AXIS_TWIST_COMPENSATION)
// /**
// Enable to init the Probe Z-Offset when starting the Wizard. * Enable to init the Probe Z-Offset when starting the Wizard.
// Use a height slightly above the estimated nozzle-to-probe Z offset. * Use a height slightly above the estimated nozzle-to-probe Z offset.
// For example, with an offset of -5, consider a starting height of -4. * For example, with an offset of -5, consider a starting height of -4.
// */
//#define PROBE_OFFSET_WIZARD_START_Z -4.0 #define XATC_START_Z 0.0
#define XATC_MAX_POINTS 3 // Number of points to probe in the wizard
// Set a convenient position to do the calibration (probing point and nozzle/bed-distance) #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe
//#define PROBE_OFFSET_WIZARD_XY_POS { X_CENTER, Y_CENTER }
#endif
#if ENABLED(AUTO_BED_LEVELING_BILINEAR)
// Add a calibration procedure in the Probe Offsets menu
// to compensate for twist in the X-axis.
//#define X_AXIS_TWIST_COMPENSATION
#if ENABLED(X_AXIS_TWIST_COMPENSATION)
/**
* Enable to init the Probe Z-Offset when starting the Wizard.
* Use a height slightly above the estimated nozzle-to-probe Z offset.
* For example, with an offset of -5, consider a starting height of -4.
*/
#define XATC_START_Z 0.0
#define XATC_MAX_POINTS 3 // Number of points to probe in the wizard
#define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe
#endif
#endif #endif
#endif #endif

56
config/examples/ADIMLab/Gantry v1/Configuration_adv.h
View file

@ -1280,37 +1280,35 @@
#define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440
#endif #endif
#if HAS_BED_PROBE && EITHER(HAS_MARLINUI_MENU, HAS_TFT_LVGL_UI)
//#define PROBE_OFFSET_WIZARD // Add a Probe Z Offset calibration option to the LCD menu
#if ENABLED(PROBE_OFFSET_WIZARD)
/**
* Enable to init the Probe Z-Offset when starting the Wizard.
* Use a height slightly above the estimated nozzle-to-probe Z offset.
* For example, with an offset of -5, consider a starting height of -4.
*/
//#define PROBE_OFFSET_WIZARD_START_Z -4.0
// Set a convenient position to do the calibration (probing point and nozzle/bed-distance)
//#define PROBE_OFFSET_WIZARD_XY_POS { X_CENTER, Y_CENTER }
#endif
#endif
#if HAS_MARLINUI_MENU #if HAS_MARLINUI_MENU
// Add Probe Z Offset calibration to the Z Probe Offsets menu #if BOTH(HAS_BED_PROBE, AUTO_BED_LEVELING_BILINEAR)
#if HAS_BED_PROBE // Add calibration in the Probe Offsets menu to compensate for X-axis twist.
//#define PROBE_OFFSET_WIZARD //#define X_AXIS_TWIST_COMPENSATION
#if ENABLED(PROBE_OFFSET_WIZARD) #if ENABLED(X_AXIS_TWIST_COMPENSATION)
// /**
// Enable to init the Probe Z-Offset when starting the Wizard. * Enable to init the Probe Z-Offset when starting the Wizard.
// Use a height slightly above the estimated nozzle-to-probe Z offset. * Use a height slightly above the estimated nozzle-to-probe Z offset.
// For example, with an offset of -5, consider a starting height of -4. * For example, with an offset of -5, consider a starting height of -4.
// */
//#define PROBE_OFFSET_WIZARD_START_Z -4.0 #define XATC_START_Z 0.0
#define XATC_MAX_POINTS 3 // Number of points to probe in the wizard
// Set a convenient position to do the calibration (probing point and nozzle/bed-distance) #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe
//#define PROBE_OFFSET_WIZARD_XY_POS { X_CENTER, Y_CENTER }
#endif
#if ENABLED(AUTO_BED_LEVELING_BILINEAR)
// Add a calibration procedure in the Probe Offsets menu
// to compensate for twist in the X-axis.
//#define X_AXIS_TWIST_COMPENSATION
#if ENABLED(X_AXIS_TWIST_COMPENSATION)
/**
* Enable to init the Probe Z-Offset when starting the Wizard.
* Use a height slightly above the estimated nozzle-to-probe Z offset.
* For example, with an offset of -5, consider a starting height of -4.
*/
#define XATC_START_Z 0.0
#define XATC_MAX_POINTS 3 // Number of points to probe in the wizard
#define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe
#endif
#endif #endif
#endif #endif

56
config/examples/ADIMLab/Gantry v2/Configuration_adv.h
View file

@ -1280,37 +1280,35 @@
#define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440
#endif #endif
#if HAS_BED_PROBE && EITHER(HAS_MARLINUI_MENU, HAS_TFT_LVGL_UI)
//#define PROBE_OFFSET_WIZARD // Add a Probe Z Offset calibration option to the LCD menu
#if ENABLED(PROBE_OFFSET_WIZARD)
/**
* Enable to init the Probe Z-Offset when starting the Wizard.
* Use a height slightly above the estimated nozzle-to-probe Z offset.
* For example, with an offset of -5, consider a starting height of -4.
*/
//#define PROBE_OFFSET_WIZARD_START_Z -4.0
// Set a convenient position to do the calibration (probing point and nozzle/bed-distance)
//#define PROBE_OFFSET_WIZARD_XY_POS { X_CENTER, Y_CENTER }
#endif
#endif
#if HAS_MARLINUI_MENU #if HAS_MARLINUI_MENU
// Add Probe Z Offset calibration to the Z Probe Offsets menu #if BOTH(HAS_BED_PROBE, AUTO_BED_LEVELING_BILINEAR)
#if HAS_BED_PROBE // Add calibration in the Probe Offsets menu to compensate for X-axis twist.
//#define PROBE_OFFSET_WIZARD //#define X_AXIS_TWIST_COMPENSATION
#if ENABLED(PROBE_OFFSET_WIZARD) #if ENABLED(X_AXIS_TWIST_COMPENSATION)
// /**
// Enable to init the Probe Z-Offset when starting the Wizard. * Enable to init the Probe Z-Offset when starting the Wizard.
// Use a height slightly above the estimated nozzle-to-probe Z offset. * Use a height slightly above the estimated nozzle-to-probe Z offset.
// For example, with an offset of -5, consider a starting height of -4. * For example, with an offset of -5, consider a starting height of -4.
// */
//#define PROBE_OFFSET_WIZARD_START_Z -4.0 #define XATC_START_Z 0.0
#define XATC_MAX_POINTS 3 // Number of points to probe in the wizard
// Set a convenient position to do the calibration (probing point and nozzle/bed-distance) #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe
//#define PROBE_OFFSET_WIZARD_XY_POS { X_CENTER, Y_CENTER }
#endif
#if ENABLED(AUTO_BED_LEVELING_BILINEAR)
// Add a calibration procedure in the Probe Offsets menu
// to compensate for twist in the X-axis.
//#define X_AXIS_TWIST_COMPENSATION
#if ENABLED(X_AXIS_TWIST_COMPENSATION)
/**
* Enable to init the Probe Z-Offset when starting the Wizard.
* Use a height slightly above the estimated nozzle-to-probe Z offset.
* For example, with an offset of -5, consider a starting height of -4.
*/
#define XATC_START_Z 0.0
#define XATC_MAX_POINTS 3 // Number of points to probe in the wizard
#define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe
#endif
#endif #endif
#endif #endif

56
config/examples/Alfawise/U20-bltouch/Configuration_adv.h
View file

@ -1289,37 +1289,35 @@
#define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440
#endif #endif
#if HAS_BED_PROBE && EITHER(HAS_MARLINUI_MENU, HAS_TFT_LVGL_UI)
//#define PROBE_OFFSET_WIZARD // Add a Probe Z Offset calibration option to the LCD menu
#if ENABLED(PROBE_OFFSET_WIZARD)
/**
* Enable to init the Probe Z-Offset when starting the Wizard.
* Use a height slightly above the estimated nozzle-to-probe Z offset.
* For example, with an offset of -5, consider a starting height of -4.
*/
//#define PROBE_OFFSET_WIZARD_START_Z -4.0
// Set a convenient position to do the calibration (probing point and nozzle/bed-distance)
//#define PROBE_OFFSET_WIZARD_XY_POS { X_CENTER, Y_CENTER }
#endif
#endif
#if HAS_MARLINUI_MENU #if HAS_MARLINUI_MENU
// Add Probe Z Offset calibration to the Z Probe Offsets menu #if BOTH(HAS_BED_PROBE, AUTO_BED_LEVELING_BILINEAR)
#if HAS_BED_PROBE // Add calibration in the Probe Offsets menu to compensate for X-axis twist.
//#define PROBE_OFFSET_WIZARD //#define X_AXIS_TWIST_COMPENSATION
#if ENABLED(PROBE_OFFSET_WIZARD) #if ENABLED(X_AXIS_TWIST_COMPENSATION)
// /**
// Enable to init the Probe Z-Offset when starting the Wizard. * Enable to init the Probe Z-Offset when starting the Wizard.
// Use a height slightly above the estimated nozzle-to-probe Z offset. * Use a height slightly above the estimated nozzle-to-probe Z offset.
// For example, with an offset of -5, consider a starting height of -4. * For example, with an offset of -5, consider a starting height of -4.
// */
//#define PROBE_OFFSET_WIZARD_START_Z -4.0 #define XATC_START_Z 0.0
#define XATC_MAX_POINTS 3 // Number of points to probe in the wizard
// Set a convenient position to do the calibration (probing point and nozzle/bed-distance) #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe
//#define PROBE_OFFSET_WIZARD_XY_POS { X_CENTER, Y_CENTER }
#endif
#if ENABLED(AUTO_BED_LEVELING_BILINEAR)
// Add a calibration procedure in the Probe Offsets menu
// to compensate for twist in the X-axis.
//#define X_AXIS_TWIST_COMPENSATION
#if ENABLED(X_AXIS_TWIST_COMPENSATION)
/**
* Enable to init the Probe Z-Offset when starting the Wizard.
* Use a height slightly above the estimated nozzle-to-probe Z offset.
* For example, with an offset of -5, consider a starting height of -4.
*/
#define XATC_START_Z 0.0
#define XATC_MAX_POINTS 3 // Number of points to probe in the wizard
#define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe
#endif
#endif #endif
#endif #endif

56
config/examples/Alfawise/U20/Configuration_adv.h
View file

@ -1280,37 +1280,35 @@
#define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440
#endif #endif
#if HAS_BED_PROBE && EITHER(HAS_MARLINUI_MENU, HAS_TFT_LVGL_UI)
//#define PROBE_OFFSET_WIZARD // Add a Probe Z Offset calibration option to the LCD menu
#if ENABLED(PROBE_OFFSET_WIZARD)
/**
* Enable to init the Probe Z-Offset when starting the Wizard.
* Use a height slightly above the estimated nozzle-to-probe Z offset.
* For example, with an offset of -5, consider a starting height of -4.
*/
//#define PROBE_OFFSET_WIZARD_START_Z -4.0
// Set a convenient position to do the calibration (probing point and nozzle/bed-distance)
//#define PROBE_OFFSET_WIZARD_XY_POS { X_CENTER, Y_CENTER }
#endif
#endif
#if HAS_MARLINUI_MENU #if HAS_MARLINUI_MENU
// Add Probe Z Offset calibration to the Z Probe Offsets menu #if BOTH(HAS_BED_PROBE, AUTO_BED_LEVELING_BILINEAR)
#if HAS_BED_PROBE // Add calibration in the Probe Offsets menu to compensate for X-axis twist.
//#define PROBE_OFFSET_WIZARD //#define X_AXIS_TWIST_COMPENSATION
#if ENABLED(PROBE_OFFSET_WIZARD) #if ENABLED(X_AXIS_TWIST_COMPENSATION)
// /**
// Enable to init the Probe Z-Offset when starting the Wizard. * Enable to init the Probe Z-Offset when starting the Wizard.
// Use a height slightly above the estimated nozzle-to-probe Z offset. * Use a height slightly above the estimated nozzle-to-probe Z offset.
// For example, with an offset of -5, consider a starting height of -4. * For example, with an offset of -5, consider a starting height of -4.
// */
//#define PROBE_OFFSET_WIZARD_START_Z -4.0 #define XATC_START_Z 0.0
#define XATC_MAX_POINTS 3 // Number of points to probe in the wizard
// Set a convenient position to do the calibration (probing point and nozzle/bed-distance) #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe
//#define PROBE_OFFSET_WIZARD_XY_POS { X_CENTER, Y_CENTER }
#endif
#if ENABLED(AUTO_BED_LEVELING_BILINEAR)
// Add a calibration procedure in the Probe Offsets menu
// to compensate for twist in the X-axis.
//#define X_AXIS_TWIST_COMPENSATION
#if ENABLED(X_AXIS_TWIST_COMPENSATION)
/**
* Enable to init the Probe Z-Offset when starting the Wizard.
* Use a height slightly above the estimated nozzle-to-probe Z offset.
* For example, with an offset of -5, consider a starting height of -4.
*/
#define XATC_START_Z 0.0
#define XATC_MAX_POINTS 3 // Number of points to probe in the wizard
#define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe
#endif
#endif #endif
#endif #endif

56
config/examples/AliExpress/UM2pExt/Configuration_adv.h
View file

@ -1280,37 +1280,35 @@
#define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440
#endif #endif
#if HAS_BED_PROBE && EITHER(HAS_MARLINUI_MENU, HAS_TFT_LVGL_UI)
//#define PROBE_OFFSET_WIZARD // Add a Probe Z Offset calibration option to the LCD menu
#if ENABLED(PROBE_OFFSET_WIZARD)
/**
* Enable to init the Probe Z-Offset when starting the Wizard.
* Use a height slightly above the estimated nozzle-to-probe Z offset.
* For example, with an offset of -5, consider a starting height of -4.
*/
//#define PROBE_OFFSET_WIZARD_START_Z -4.0
// Set a convenient position to do the calibration (probing point and nozzle/bed-distance)
//#define PROBE_OFFSET_WIZARD_XY_POS { X_CENTER, Y_CENTER }
#endif
#endif
#if HAS_MARLINUI_MENU #if HAS_MARLINUI_MENU
// Add Probe Z Offset calibration to the Z Probe Offsets menu #if BOTH(HAS_BED_PROBE, AUTO_BED_LEVELING_BILINEAR)
#if HAS_BED_PROBE // Add calibration in the Probe Offsets menu to compensate for X-axis twist.
//#define PROBE_OFFSET_WIZARD //#define X_AXIS_TWIST_COMPENSATION
#if ENABLED(PROBE_OFFSET_WIZARD) #if ENABLED(X_AXIS_TWIST_COMPENSATION)
// /**
// Enable to init the Probe Z-Offset when starting the Wizard. * Enable to init the Probe Z-Offset when starting the Wizard.
// Use a height slightly above the estimated nozzle-to-probe Z offset. * Use a height slightly above the estimated nozzle-to-probe Z offset.
// For example, with an offset of -5, consider a starting height of -4. * For example, with an offset of -5, consider a starting height of -4.
// */
//#define PROBE_OFFSET_WIZARD_START_Z -4.0 #define XATC_START_Z 0.0
#define XATC_MAX_POINTS 3 // Number of points to probe in the wizard
// Set a convenient position to do the calibration (probing point and nozzle/bed-distance) #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe
//#define PROBE_OFFSET_WIZARD_XY_POS { X_CENTER, Y_CENTER }
#endif
#if ENABLED(AUTO_BED_LEVELING_BILINEAR)
// Add a calibration procedure in the Probe Offsets menu
// to compensate for twist in the X-axis.
//#define X_AXIS_TWIST_COMPENSATION
#if ENABLED(X_AXIS_TWIST_COMPENSATION)
/**
* Enable to init the Probe Z-Offset when starting the Wizard.
* Use a height slightly above the estimated nozzle-to-probe Z offset.
* For example, with an offset of -5, consider a starting height of -4.
*/
#define XATC_START_Z 0.0
#define XATC_MAX_POINTS 3 // Number of points to probe in the wizard
#define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe
#endif
#endif #endif
#endif #endif

56
config/examples/Anet/A2/Configuration_adv.h
View file

@ -1280,37 +1280,35 @@
#define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440
#endif #endif
#if HAS_BED_PROBE && EITHER(HAS_MARLINUI_MENU, HAS_TFT_LVGL_UI)
//#define PROBE_OFFSET_WIZARD // Add a Probe Z Offset calibration option to the LCD menu
#if ENABLED(PROBE_OFFSET_WIZARD)
/**
* Enable to init the Probe Z-Offset when starting the Wizard.
* Use a height slightly above the estimated nozzle-to-probe Z offset.
* For example, with an offset of -5, consider a starting height of -4.
*/
//#define PROBE_OFFSET_WIZARD_START_Z -4.0
// Set a convenient position to do the calibration (probing point and nozzle/bed-distance)
//#define PROBE_OFFSET_WIZARD_XY_POS { X_CENTER, Y_CENTER }
#endif
#endif
#if HAS_MARLINUI_MENU #if HAS_MARLINUI_MENU
// Add Probe Z Offset calibration to the Z Probe Offsets menu #if BOTH(HAS_BED_PROBE, AUTO_BED_LEVELING_BILINEAR)
#if HAS_BED_PROBE // Add calibration in the Probe Offsets menu to compensate for X-axis twist.
//#define PROBE_OFFSET_WIZARD //#define X_AXIS_TWIST_COMPENSATION
#if ENABLED(PROBE_OFFSET_WIZARD) #if ENABLED(X_AXIS_TWIST_COMPENSATION)
// /**
// Enable to init the Probe Z-Offset when starting the Wizard. * Enable to init the Probe Z-Offset when starting the Wizard.
// Use a height slightly above the estimated nozzle-to-probe Z offset. * Use a height slightly above the estimated nozzle-to-probe Z offset.
// For example, with an offset of -5, consider a starting height of -4. * For example, with an offset of -5, consider a starting height of -4.
// */
//#define PROBE_OFFSET_WIZARD_START_Z -4.0 #define XATC_START_Z 0.0
#define XATC_MAX_POINTS 3 // Number of points to probe in the wizard
// Set a convenient position to do the calibration (probing point and nozzle/bed-distance) #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe
//#define PROBE_OFFSET_WIZARD_XY_POS { X_CENTER, Y_CENTER }
#endif
#if ENABLED(AUTO_BED_LEVELING_BILINEAR)
// Add a calibration procedure in the Probe Offsets menu
// to compensate for twist in the X-axis.
//#define X_AXIS_TWIST_COMPENSATION
#if ENABLED(X_AXIS_TWIST_COMPENSATION)
/**
* Enable to init the Probe Z-Offset when starting the Wizard.
* Use a height slightly above the estimated nozzle-to-probe Z offset.
* For example, with an offset of -5, consider a starting height of -4.
*/
#define XATC_START_Z 0.0
#define XATC_MAX_POINTS 3 // Number of points to probe in the wizard
#define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe
#endif
#endif #endif
#endif #endif

56
config/examples/Anet/A2plus/Configuration_adv.h
View file

@ -1280,37 +1280,35 @@
#define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440
#endif #endif
#if HAS_BED_PROBE && EITHER(HAS_MARLINUI_MENU, HAS_TFT_LVGL_UI)
//#define PROBE_OFFSET_WIZARD // Add a Probe Z Offset calibration option to the LCD menu
#if ENABLED(PROBE_OFFSET_WIZARD)
/**
* Enable to init the Probe Z-Offset when starting the Wizard.
* Use a height slightly above the estimated nozzle-to-probe Z offset.
* For example, with an offset of -5, consider a starting height of -4.
*/
//#define PROBE_OFFSET_WIZARD_START_Z -4.0
// Set a convenient position to do the calibration (probing point and nozzle/bed-distance)
//#define PROBE_OFFSET_WIZARD_XY_POS { X_CENTER, Y_CENTER }
#endif
#endif
#if HAS_MARLINUI_MENU #if HAS_MARLINUI_MENU
// Add Probe Z Offset calibration to the Z Probe Offsets menu #if BOTH(HAS_BED_PROBE, AUTO_BED_LEVELING_BILINEAR)
#if HAS_BED_PROBE // Add calibration in the Probe Offsets menu to compensate for X-axis twist.
//#define PROBE_OFFSET_WIZARD //#define X_AXIS_TWIST_COMPENSATION
#if ENABLED(PROBE_OFFSET_WIZARD) #if ENABLED(X_AXIS_TWIST_COMPENSATION)
// /**
// Enable to init the Probe Z-Offset when starting the Wizard. * Enable to init the Probe Z-Offset when starting the Wizard.
// Use a height slightly above the estimated nozzle-to-probe Z offset. * Use a height slightly above the estimated nozzle-to-probe Z offset.
// For example, with an offset of -5, consider a starting height of -4. * For example, with an offset of -5, consider a starting height of -4.
// */
//#define PROBE_OFFSET_WIZARD_START_Z -4.0 #define XATC_START_Z 0.0
#define XATC_MAX_POINTS 3 // Number of points to probe in the wizard
// Set a convenient position to do the calibration (probing point and nozzle/bed-distance) #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe
//#define PROBE_OFFSET_WIZARD_XY_POS { X_CENTER, Y_CENTER }
#endif
#if ENABLED(AUTO_BED_LEVELING_BILINEAR)
// Add a calibration procedure in the Probe Offsets menu
// to compensate for twist in the X-axis.
//#define X_AXIS_TWIST_COMPENSATION
#if ENABLED(X_AXIS_TWIST_COMPENSATION)
/**
* Enable to init the Probe Z-Offset when starting the Wizard.
* Use a height slightly above the estimated nozzle-to-probe Z offset.
* For example, with an offset of -5, consider a starting height of -4.
*/
#define XATC_START_Z 0.0
#define XATC_MAX_POINTS 3 // Number of points to probe in the wizard
#define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe
#endif
#endif #endif
#endif #endif

56
config/examples/Anet/A6/Configuration_adv.h
View file

@ -1280,37 +1280,35 @@
#define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440
#endif #endif
#if HAS_BED_PROBE && EITHER(HAS_MARLINUI_MENU, HAS_TFT_LVGL_UI)
//#define PROBE_OFFSET_WIZARD // Add a Probe Z Offset calibration option to the LCD menu
#if ENABLED(PROBE_OFFSET_WIZARD)
/**
* Enable to init the Probe Z-Offset when starting the Wizard.
* Use a height slightly above the estimated nozzle-to-probe Z offset.
* For example, with an offset of -5, consider a starting height of -4.
*/
//#define PROBE_OFFSET_WIZARD_START_Z -4.0
// Set a convenient position to do the calibration (probing point and nozzle/bed-distance)
//#define PROBE_OFFSET_WIZARD_XY_POS { X_CENTER, Y_CENTER }
#endif
#endif
#if HAS_MARLINUI_MENU #if HAS_MARLINUI_MENU
// Add Probe Z Offset calibration to the Z Probe Offsets menu #if BOTH(HAS_BED_PROBE, AUTO_BED_LEVELING_BILINEAR)
#if HAS_BED_PROBE // Add calibration in the Probe Offsets menu to compensate for X-axis twist.
//#define PROBE_OFFSET_WIZARD //#define X_AXIS_TWIST_COMPENSATION
#if ENABLED(PROBE_OFFSET_WIZARD) #if ENABLED(X_AXIS_TWIST_COMPENSATION)
// /**
// Enable to init the Probe Z-Offset when starting the Wizard. * Enable to init the Probe Z-Offset when starting the Wizard.
// Use a height slightly above the estimated nozzle-to-probe Z offset. * Use a height slightly above the estimated nozzle-to-probe Z offset.
// For example, with an offset of -5, consider a starting height of -4. * For example, with an offset of -5, consider a starting height of -4.
// */
//#define PROBE_OFFSET_WIZARD_START_Z -4.0 #define XATC_START_Z 0.0
#define XATC_MAX_POINTS 3 // Number of points to probe in the wizard
// Set a convenient position to do the calibration (probing point and nozzle/bed-distance) #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe
//#define PROBE_OFFSET_WIZARD_XY_POS { X_CENTER, Y_CENTER }
#endif
#if ENABLED(AUTO_BED_LEVELING_BILINEAR)
// Add a calibration procedure in the Probe Offsets menu
// to compensate for twist in the X-axis.
//#define X_AXIS_TWIST_COMPENSATION
#if ENABLED(X_AXIS_TWIST_COMPENSATION)
/**
* Enable to init the Probe Z-Offset when starting the Wizard.
* Use a height slightly above the estimated nozzle-to-probe Z offset.
* For example, with an offset of -5, consider a starting height of -4.
*/
#define XATC_START_Z 0.0
#define XATC_MAX_POINTS 3 // Number of points to probe in the wizard
#define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe
#endif
#endif #endif
#endif #endif

56
config/examples/Anet/A8/Configuration_adv.h
View file

@ -1280,37 +1280,35 @@
#define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440
#endif #endif
#if HAS_BED_PROBE && EITHER(HAS_MARLINUI_MENU, HAS_TFT_LVGL_UI)
//#define PROBE_OFFSET_WIZARD // Add a Probe Z Offset calibration option to the LCD menu
#if ENABLED(PROBE_OFFSET_WIZARD)
/**
* Enable to init the Probe Z-Offset when starting the Wizard.
* Use a height slightly above the estimated nozzle-to-probe Z offset.
* For example, with an offset of -5, consider a starting height of -4.
*/
//#define PROBE_OFFSET_WIZARD_START_Z -4.0
// Set a convenient position to do the calibration (probing point and nozzle/bed-distance)
//#define PROBE_OFFSET_WIZARD_XY_POS { X_CENTER, Y_CENTER }
#endif
#endif
#if HAS_MARLINUI_MENU #if HAS_MARLINUI_MENU
// Add Probe Z Offset calibration to the Z Probe Offsets menu #if BOTH(HAS_BED_PROBE, AUTO_BED_LEVELING_BILINEAR)
#if HAS_BED_PROBE // Add calibration in the Probe Offsets menu to compensate for X-axis twist.
//#define PROBE_OFFSET_WIZARD //#define X_AXIS_TWIST_COMPENSATION
#if ENABLED(PROBE_OFFSET_WIZARD) #if ENABLED(X_AXIS_TWIST_COMPENSATION)
// /**
// Enable to init the Probe Z-Offset when starting the Wizard. * Enable to init the Probe Z-Offset when starting the Wizard.
// Use a height slightly above the estimated nozzle-to-probe Z offset. * Use a height slightly above the estimated nozzle-to-probe Z offset.
// For example, with an offset of -5, consider a starting height of -4. * For example, with an offset of -5, consider a starting height of -4.
// */
//#define PROBE_OFFSET_WIZARD_START_Z -4.0 #define XATC_START_Z 0.0
#define XATC_MAX_POINTS 3 // Number of points to probe in the wizard
// Set a convenient position to do the calibration (probing point and nozzle/bed-distance) #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe
//#define PROBE_OFFSET_WIZARD_XY_POS { X_CENTER, Y_CENTER }
#endif
#if ENABLED(AUTO_BED_LEVELING_BILINEAR)
// Add a calibration procedure in the Probe Offsets menu
// to compensate for twist in the X-axis.
//#define X_AXIS_TWIST_COMPENSATION
#if ENABLED(X_AXIS_TWIST_COMPENSATION)
/**
* Enable to init the Probe Z-Offset when starting the Wizard.
* Use a height slightly above the estimated nozzle-to-probe Z offset.
* For example, with an offset of -5, consider a starting height of -4.
*/
#define XATC_START_Z 0.0
#define XATC_MAX_POINTS 3 // Number of points to probe in the wizard
#define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe
#endif
#endif #endif
#endif #endif

56
config/examples/Anet/A8plus/Configuration_adv.h
View file

@ -1280,37 +1280,35 @@
#define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440
#endif #endif
#if HAS_BED_PROBE && EITHER(HAS_MARLINUI_MENU, HAS_TFT_LVGL_UI)
//#define PROBE_OFFSET_WIZARD // Add a Probe Z Offset calibration option to the LCD menu
#if ENABLED(PROBE_OFFSET_WIZARD)
/**
* Enable to init the Probe Z-Offset when starting the Wizard.
* Use a height slightly above the estimated nozzle-to-probe Z offset.
* For example, with an offset of -5, consider a starting height of -4.
*/
//#define PROBE_OFFSET_WIZARD_START_Z -4.0
// Set a convenient position to do the calibration (probing point and nozzle/bed-distance)
//#define PROBE_OFFSET_WIZARD_XY_POS { X_CENTER, Y_CENTER }
#endif
#endif
#if HAS_MARLINUI_MENU #if HAS_MARLINUI_MENU
// Add Probe Z Offset calibration to the Z Probe Offsets menu #if BOTH(HAS_BED_PROBE, AUTO_BED_LEVELING_BILINEAR)
#if HAS_BED_PROBE // Add calibration in the Probe Offsets menu to compensate for X-axis twist.
//#define PROBE_OFFSET_WIZARD //#define X_AXIS_TWIST_COMPENSATION
#if ENABLED(PROBE_OFFSET_WIZARD) #if ENABLED(X_AXIS_TWIST_COMPENSATION)
// /**
// Enable to init the Probe Z-Offset when starting the Wizard. * Enable to init the Probe Z-Offset when starting the Wizard.
// Use a height slightly above the estimated nozzle-to-probe Z offset. * Use a height slightly above the estimated nozzle-to-probe Z offset.
// For example, with an offset of -5, consider a starting height of -4. * For example, with an offset of -5, consider a starting height of -4.
// */
//#define PROBE_OFFSET_WIZARD_START_Z -4.0 #define XATC_START_Z 0.0
#define XATC_MAX_POINTS 3 // Number of points to probe in the wizard
// Set a convenient position to do the calibration (probing point and nozzle/bed-distance) #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe
//#define PROBE_OFFSET_WIZARD_XY_POS { X_CENTER, Y_CENTER }
#endif
#if ENABLED(AUTO_BED_LEVELING_BILINEAR)
// Add a calibration procedure in the Probe Offsets menu
// to compensate for twist in the X-axis.
//#define X_AXIS_TWIST_COMPENSATION
#if ENABLED(X_AXIS_TWIST_COMPENSATION)
/**
* Enable to init the Probe Z-Offset when starting the Wizard.
* Use a height slightly above the estimated nozzle-to-probe Z offset.
* For example, with an offset of -5, consider a starting height of -4.
*/
#define XATC_START_Z 0.0
#define XATC_MAX_POINTS 3 // Number of points to probe in the wizard
#define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe
#endif
#endif #endif
#endif #endif

56
config/examples/Anet/A9/Configuration_adv.h
View file

@ -1280,37 +1280,35 @@
#define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440
#endif #endif
#if HAS_BED_PROBE && EITHER(HAS_MARLINUI_MENU, HAS_TFT_LVGL_UI)
//#define PROBE_OFFSET_WIZARD // Add a Probe Z Offset calibration option to the LCD menu
#if ENABLED(PROBE_OFFSET_WIZARD)
/**
* Enable to init the Probe Z-Offset when starting the Wizard.
* Use a height slightly above the estimated nozzle-to-probe Z offset.
* For example, with an offset of -5, consider a starting height of -4.
*/
//#define PROBE_OFFSET_WIZARD_START_Z -4.0
// Set a convenient position to do the calibration (probing point and nozzle/bed-distance)
//#define PROBE_OFFSET_WIZARD_XY_POS { X_CENTER, Y_CENTER }
#endif
#endif
#if HAS_MARLINUI_MENU #if HAS_MARLINUI_MENU
// Add Probe Z Offset calibration to the Z Probe Offsets menu #if BOTH(HAS_BED_PROBE, AUTO_BED_LEVELING_BILINEAR)
#if HAS_BED_PROBE // Add calibration in the Probe Offsets menu to compensate for X-axis twist.
//#define PROBE_OFFSET_WIZARD //#define X_AXIS_TWIST_COMPENSATION
#if ENABLED(PROBE_OFFSET_WIZARD) #if ENABLED(X_AXIS_TWIST_COMPENSATION)
// /**
// Enable to init the Probe Z-Offset when starting the Wizard. * Enable to init the Probe Z-Offset when starting the Wizard.
// Use a height slightly above the estimated nozzle-to-probe Z offset. * Use a height slightly above the estimated nozzle-to-probe Z offset.
// For example, with an offset of -5, consider a starting height of -4. * For example, with an offset of -5, consider a starting height of -4.
// */
//#define PROBE_OFFSET_WIZARD_START_Z -4.0 #define XATC_START_Z 0.0
#define XATC_MAX_POINTS 3 // Number of points to probe in the wizard
// Set a convenient position to do the calibration (probing point and nozzle/bed-distance) #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe
//#define PROBE_OFFSET_WIZARD_XY_POS { X_CENTER, Y_CENTER }
#endif
#if ENABLED(AUTO_BED_LEVELING_BILINEAR)
// Add a calibration procedure in the Probe Offsets menu
// to compensate for twist in the X-axis.
//#define X_AXIS_TWIST_COMPENSATION
#if ENABLED(X_AXIS_TWIST_COMPENSATION)
/**
* Enable to init the Probe Z-Offset when starting the Wizard.
* Use a height slightly above the estimated nozzle-to-probe Z offset.
* For example, with an offset of -5, consider a starting height of -4.
*/
#define XATC_START_Z 0.0
#define XATC_MAX_POINTS 3 // Number of points to probe in the wizard
#define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe
#endif
#endif #endif
#endif #endif

56
config/examples/Anet/E10/Configuration_adv.h
View file

@ -1280,37 +1280,35 @@
#define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440
#endif #endif
#if HAS_BED_PROBE && EITHER(HAS_MARLINUI_MENU, HAS_TFT_LVGL_UI)
//#define PROBE_OFFSET_WIZARD // Add a Probe Z Offset calibration option to the LCD menu
#if ENABLED(PROBE_OFFSET_WIZARD)
/**
* Enable to init the Probe Z-Offset when starting the Wizard.
* Use a height slightly above the estimated nozzle-to-probe Z offset.
* For example, with an offset of -5, consider a starting height of -4.
*/
//#define PROBE_OFFSET_WIZARD_START_Z -4.0
// Set a convenient position to do the calibration (probing point and nozzle/bed-distance)
//#define PROBE_OFFSET_WIZARD_XY_POS { X_CENTER, Y_CENTER }
#endif
#endif
#if HAS_MARLINUI_MENU #if HAS_MARLINUI_MENU
// Add Probe Z Offset calibration to the Z Probe Offsets menu #if BOTH(HAS_BED_PROBE, AUTO_BED_LEVELING_BILINEAR)
#if HAS_BED_PROBE // Add calibration in the Probe Offsets menu to compensate for X-axis twist.
//#define PROBE_OFFSET_WIZARD //#define X_AXIS_TWIST_COMPENSATION
#if ENABLED(PROBE_OFFSET_WIZARD) #if ENABLED(X_AXIS_TWIST_COMPENSATION)
// /**
// Enable to init the Probe Z-Offset when starting the Wizard. * Enable to init the Probe Z-Offset when starting the Wizard.
// Use a height slightly above the estimated nozzle-to-probe Z offset. * Use a height slightly above the estimated nozzle-to-probe Z offset.
// For example, with an offset of -5, consider a starting height of -4. * For example, with an offset of -5, consider a starting height of -4.
// */
//#define PROBE_OFFSET_WIZARD_START_Z -4.0 #define XATC_START_Z 0.0
#define XATC_MAX_POINTS 3 // Number of points to probe in the wizard
// Set a convenient position to do the calibration (probing point and nozzle/bed-distance) #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe
//#define PROBE_OFFSET_WIZARD_XY_POS { X_CENTER, Y_CENTER }
#endif
#if ENABLED(AUTO_BED_LEVELING_BILINEAR)
// Add a calibration procedure in the Probe Offsets menu
// to compensate for twist in the X-axis.
//#define X_AXIS_TWIST_COMPENSATION
#if ENABLED(X_AXIS_TWIST_COMPENSATION)
/**
* Enable to init the Probe Z-Offset when starting the Wizard.
* Use a height slightly above the estimated nozzle-to-probe Z offset.
* For example, with an offset of -5, consider a starting height of -4.
*/
#define XATC_START_Z 0.0
#define XATC_MAX_POINTS 3 // Number of points to probe in the wizard
#define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe
#endif
#endif #endif
#endif #endif

56
config/examples/Anet/E16/BTT SKR 1.3/Configuration_adv.h
View file

@ -1280,37 +1280,35 @@
#define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440
#endif #endif
#if HAS_BED_PROBE && EITHER(HAS_MARLINUI_MENU, HAS_TFT_LVGL_UI)
//#define PROBE_OFFSET_WIZARD // Add a Probe Z Offset calibration option to the LCD menu
#if ENABLED(PROBE_OFFSET_WIZARD)
/**
* Enable to init the Probe Z-Offset when starting the Wizard.
* Use a height slightly above the estimated nozzle-to-probe Z offset.
* For example, with an offset of -5, consider a starting height of -4.
*/
//#define PROBE_OFFSET_WIZARD_START_Z -4.0
// Set a convenient position to do the calibration (probing point and nozzle/bed-distance)
//#define PROBE_OFFSET_WIZARD_XY_POS { X_CENTER, Y_CENTER }
#endif
#endif
#if HAS_MARLINUI_MENU #if HAS_MARLINUI_MENU
// Add Probe Z Offset calibration to the Z Probe Offsets menu #if BOTH(HAS_BED_PROBE, AUTO_BED_LEVELING_BILINEAR)
#if HAS_BED_PROBE // Add calibration in the Probe Offsets menu to compensate for X-axis twist.
//#define PROBE_OFFSET_WIZARD //#define X_AXIS_TWIST_COMPENSATION
#if ENABLED(PROBE_OFFSET_WIZARD) #if ENABLED(X_AXIS_TWIST_COMPENSATION)
// /**
// Enable to init the Probe Z-Offset when starting the Wizard. * Enable to init the Probe Z-Offset when starting the Wizard.
// Use a height slightly above the estimated nozzle-to-probe Z offset. * Use a height slightly above the estimated nozzle-to-probe Z offset.
// For example, with an offset of -5, consider a starting height of -4. * For example, with an offset of -5, consider a starting height of -4.
// */
//#define PROBE_OFFSET_WIZARD_START_Z -4.0 #define XATC_START_Z 0.0
#define XATC_MAX_POINTS 3 // Number of points to probe in the wizard
// Set a convenient position to do the calibration (probing point and nozzle/bed-distance) #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe
//#define PROBE_OFFSET_WIZARD_XY_POS { X_CENTER, Y_CENTER }
#endif
#if ENABLED(AUTO_BED_LEVELING_BILINEAR)
// Add a calibration procedure in the Probe Offsets menu
// to compensate for twist in the X-axis.
//#define X_AXIS_TWIST_COMPENSATION
#if ENABLED(X_AXIS_TWIST_COMPENSATION)
/**
* Enable to init the Probe Z-Offset when starting the Wizard.
* Use a height slightly above the estimated nozzle-to-probe Z offset.
* For example, with an offset of -5, consider a starting height of -4.
*/
#define XATC_START_Z 0.0
#define XATC_MAX_POINTS 3 // Number of points to probe in the wizard
#define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe
#endif
#endif #endif
#endif #endif

56
config/examples/Anet/E16/Stock/Configuration_adv.h
View file

@ -1280,37 +1280,35 @@
#define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440
#endif #endif
#if HAS_BED_PROBE && EITHER(HAS_MARLINUI_MENU, HAS_TFT_LVGL_UI)
//#define PROBE_OFFSET_WIZARD // Add a Probe Z Offset calibration option to the LCD menu
#if ENABLED(PROBE_OFFSET_WIZARD)
/**
* Enable to init the Probe Z-Offset when starting the Wizard.
* Use a height slightly above the estimated nozzle-to-probe Z offset.
* For example, with an offset of -5, consider a starting height of -4.
*/
//#define PROBE_OFFSET_WIZARD_START_Z -4.0
// Set a convenient position to do the calibration (probing point and nozzle/bed-distance)
//#define PROBE_OFFSET_WIZARD_XY_POS { X_CENTER, Y_CENTER }
#endif
#endif
#if HAS_MARLINUI_MENU #if HAS_MARLINUI_MENU
// Add Probe Z Offset calibration to the Z Probe Offsets menu #if BOTH(HAS_BED_PROBE, AUTO_BED_LEVELING_BILINEAR)
#if HAS_BED_PROBE // Add calibration in the Probe Offsets menu to compensate for X-axis twist.
//#define PROBE_OFFSET_WIZARD //#define X_AXIS_TWIST_COMPENSATION
#if ENABLED(PROBE_OFFSET_WIZARD) #if ENABLED(X_AXIS_TWIST_COMPENSATION)
// /**
// Enable to init the Probe Z-Offset when starting the Wizard. * Enable to init the Probe Z-Offset when starting the Wizard.
// Use a height slightly above the estimated nozzle-to-probe Z offset. * Use a height slightly above the estimated nozzle-to-probe Z offset.
// For example, with an offset of -5, consider a starting height of -4. * For example, with an offset of -5, consider a starting height of -4.
// */
//#define PROBE_OFFSET_WIZARD_START_Z -4.0 #define XATC_START_Z 0.0
#define XATC_MAX_POINTS 3 // Number of points to probe in the wizard
// Set a convenient position to do the calibration (probing point and nozzle/bed-distance) #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe
//#define PROBE_OFFSET_WIZARD_XY_POS { X_CENTER, Y_CENTER }
#endif
#if ENABLED(AUTO_BED_LEVELING_BILINEAR)
// Add a calibration procedure in the Probe Offsets menu
// to compensate for twist in the X-axis.
//#define X_AXIS_TWIST_COMPENSATION
#if ENABLED(X_AXIS_TWIST_COMPENSATION)
/**
* Enable to init the Probe Z-Offset when starting the Wizard.
* Use a height slightly above the estimated nozzle-to-probe Z offset.
* For example, with an offset of -5, consider a starting height of -4.
*/
#define XATC_START_Z 0.0
#define XATC_MAX_POINTS 3 // Number of points to probe in the wizard
#define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe
#endif
#endif #endif
#endif #endif

56
config/examples/Anet/ET4+/Configuration_adv.h
View file

@ -1280,37 +1280,35 @@
#define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440
#endif #endif
#if HAS_BED_PROBE && EITHER(HAS_MARLINUI_MENU, HAS_TFT_LVGL_UI)
//#define PROBE_OFFSET_WIZARD // Add a Probe Z Offset calibration option to the LCD menu
#if ENABLED(PROBE_OFFSET_WIZARD)
/**
* Enable to init the Probe Z-Offset when starting the Wizard.
* Use a height slightly above the estimated nozzle-to-probe Z offset.
* For example, with an offset of -5, consider a starting height of -4.
*/
//#define PROBE_OFFSET_WIZARD_START_Z -4.0
// Set a convenient position to do the calibration (probing point and nozzle/bed-distance)
//#define PROBE_OFFSET_WIZARD_XY_POS { X_CENTER, Y_CENTER }
#endif
#endif
#if HAS_MARLINUI_MENU #if HAS_MARLINUI_MENU
// Add Probe Z Offset calibration to the Z Probe Offsets menu #if BOTH(HAS_BED_PROBE, AUTO_BED_LEVELING_BILINEAR)
#if HAS_BED_PROBE // Add calibration in the Probe Offsets menu to compensate for X-axis twist.
//#define PROBE_OFFSET_WIZARD //#define X_AXIS_TWIST_COMPENSATION
#if ENABLED(PROBE_OFFSET_WIZARD) #if ENABLED(X_AXIS_TWIST_COMPENSATION)
// /**
// Enable to init the Probe Z-Offset when starting the Wizard. * Enable to init the Probe Z-Offset when starting the Wizard.
// Use a height slightly above the estimated nozzle-to-probe Z offset. * Use a height slightly above the estimated nozzle-to-probe Z offset.
// For example, with an offset of -5, consider a starting height of -4. * For example, with an offset of -5, consider a starting height of -4.
// */
//#define PROBE_OFFSET_WIZARD_START_Z -4.0 #define XATC_START_Z 0.0
#define XATC_MAX_POINTS 3 // Number of points to probe in the wizard
// Set a convenient position to do the calibration (probing point and nozzle/bed-distance) #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe
//#define PROBE_OFFSET_WIZARD_XY_POS { X_CENTER, Y_CENTER }
#endif
#if ENABLED(AUTO_BED_LEVELING_BILINEAR)
// Add a calibration procedure in the Probe Offsets menu
// to compensate for twist in the X-axis.
//#define X_AXIS_TWIST_COMPENSATION
#if ENABLED(X_AXIS_TWIST_COMPENSATION)
/**
* Enable to init the Probe Z-Offset when starting the Wizard.
* Use a height slightly above the estimated nozzle-to-probe Z offset.
* For example, with an offset of -5, consider a starting height of -4.
*/
#define XATC_START_Z 0.0
#define XATC_MAX_POINTS 3 // Number of points to probe in the wizard
#define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe
#endif
#endif #endif
#endif #endif

56
config/examples/Anet/ET4-Pro/Configuration_adv.h
View file

@ -1280,37 +1280,35 @@
#define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440
#endif #endif
#if HAS_BED_PROBE && EITHER(HAS_MARLINUI_MENU, HAS_TFT_LVGL_UI)
//#define PROBE_OFFSET_WIZARD // Add a Probe Z Offset calibration option to the LCD menu
#if ENABLED(PROBE_OFFSET_WIZARD)
/**
* Enable to init the Probe Z-Offset when starting the Wizard.
* Use a height slightly above the estimated nozzle-to-probe Z offset.
* For example, with an offset of -5, consider a starting height of -4.
*/
//#define PROBE_OFFSET_WIZARD_START_Z -4.0
// Set a convenient position to do the calibration (probing point and nozzle/bed-distance)
//#define PROBE_OFFSET_WIZARD_XY_POS { X_CENTER, Y_CENTER }
#endif
#endif
#if HAS_MARLINUI_MENU #if HAS_MARLINUI_MENU
// Add Probe Z Offset calibration to the Z Probe Offsets menu #if BOTH(HAS_BED_PROBE, AUTO_BED_LEVELING_BILINEAR)
#if HAS_BED_PROBE // Add calibration in the Probe Offsets menu to compensate for X-axis twist.
//#define PROBE_OFFSET_WIZARD //#define X_AXIS_TWIST_COMPENSATION
#if ENABLED(PROBE_OFFSET_WIZARD) #if ENABLED(X_AXIS_TWIST_COMPENSATION)
// /**
// Enable to init the Probe Z-Offset when starting the Wizard. * Enable to init the Probe Z-Offset when starting the Wizard.
// Use a height slightly above the estimated nozzle-to-probe Z offset. * Use a height slightly above the estimated nozzle-to-probe Z offset.
// For example, with an offset of -5, consider a starting height of -4. * For example, with an offset of -5, consider a starting height of -4.
// */
//#define PROBE_OFFSET_WIZARD_START_Z -4.0 #define XATC_START_Z 0.0
#define XATC_MAX_POINTS 3 // Number of points to probe in the wizard
// Set a convenient position to do the calibration (probing point and nozzle/bed-distance) #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe
//#define PROBE_OFFSET_WIZARD_XY_POS { X_CENTER, Y_CENTER }
#endif
#if ENABLED(AUTO_BED_LEVELING_BILINEAR)
// Add a calibration procedure in the Probe Offsets menu
// to compensate for twist in the X-axis.
//#define X_AXIS_TWIST_COMPENSATION
#if ENABLED(X_AXIS_TWIST_COMPENSATION)
/**
* Enable to init the Probe Z-Offset when starting the Wizard.
* Use a height slightly above the estimated nozzle-to-probe Z offset.
* For example, with an offset of -5, consider a starting height of -4.
*/
#define XATC_START_Z 0.0
#define XATC_MAX_POINTS 3 // Number of points to probe in the wizard
#define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe
#endif
#endif #endif
#endif #endif

56
config/examples/Anet/ET4/Configuration_adv.h
View file

@ -1280,37 +1280,35 @@
#define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440
#endif #endif
#if HAS_BED_PROBE && EITHER(HAS_MARLINUI_MENU, HAS_TFT_LVGL_UI)
//#define PROBE_OFFSET_WIZARD // Add a Probe Z Offset calibration option to the LCD menu
#if ENABLED(PROBE_OFFSET_WIZARD)
/**
* Enable to init the Probe Z-Offset when starting the Wizard.
* Use a height slightly above the estimated nozzle-to-probe Z offset.
* For example, with an offset of -5, consider a starting height of -4.
*/
//#define PROBE_OFFSET_WIZARD_START_Z -4.0
// Set a convenient position to do the calibration (probing point and nozzle/bed-distance)
//#define PROBE_OFFSET_WIZARD_XY_POS { X_CENTER, Y_CENTER }
#endif
#endif
#if HAS_MARLINUI_MENU #if HAS_MARLINUI_MENU
// Add Probe Z Offset calibration to the Z Probe Offsets menu #if BOTH(HAS_BED_PROBE, AUTO_BED_LEVELING_BILINEAR)
#if HAS_BED_PROBE // Add calibration in the Probe Offsets menu to compensate for X-axis twist.
//#define PROBE_OFFSET_WIZARD //#define X_AXIS_TWIST_COMPENSATION
#if ENABLED(PROBE_OFFSET_WIZARD) #if ENABLED(X_AXIS_TWIST_COMPENSATION)
// /**
// Enable to init the Probe Z-Offset when starting the Wizard. * Enable to init the Probe Z-Offset when starting the Wizard.
// Use a height slightly above the estimated nozzle-to-probe Z offset. * Use a height slightly above the estimated nozzle-to-probe Z offset.
// For example, with an offset of -5, consider a starting height of -4. * For example, with an offset of -5, consider a starting height of -4.
// */
//#define PROBE_OFFSET_WIZARD_START_Z -4.0 #define XATC_START_Z 0.0
#define XATC_MAX_POINTS 3 // Number of points to probe in the wizard
// Set a convenient position to do the calibration (probing point and nozzle/bed-distance) #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe
//#define PROBE_OFFSET_WIZARD_XY_POS { X_CENTER, Y_CENTER }
#endif
#if ENABLED(AUTO_BED_LEVELING_BILINEAR)
// Add a calibration procedure in the Probe Offsets menu
// to compensate for twist in the X-axis.
//#define X_AXIS_TWIST_COMPENSATION
#if ENABLED(X_AXIS_TWIST_COMPENSATION)
/**
* Enable to init the Probe Z-Offset when starting the Wizard.
* Use a height slightly above the estimated nozzle-to-probe Z offset.
* For example, with an offset of -5, consider a starting height of -4.
*/
#define XATC_START_Z 0.0
#define XATC_MAX_POINTS 3 // Number of points to probe in the wizard
#define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe
#endif
#endif #endif
#endif #endif

56
config/examples/Anet/ET4X/Configuration_adv.h
View file

@ -1280,37 +1280,35 @@
#define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440
#endif #endif
#if HAS_BED_PROBE && EITHER(HAS_MARLINUI_MENU, HAS_TFT_LVGL_UI)
//#define PROBE_OFFSET_WIZARD // Add a Probe Z Offset calibration option to the LCD menu
#if ENABLED(PROBE_OFFSET_WIZARD)
/**
* Enable to init the Probe Z-Offset when starting the Wizard.
* Use a height slightly above the estimated nozzle-to-probe Z offset.
* For example, with an offset of -5, consider a starting height of -4.
*/
//#define PROBE_OFFSET_WIZARD_START_Z -4.0
// Set a convenient position to do the calibration (probing point and nozzle/bed-distance)
//#define PROBE_OFFSET_WIZARD_XY_POS { X_CENTER, Y_CENTER }
#endif
#endif
#if HAS_MARLINUI_MENU #if HAS_MARLINUI_MENU
// Add Probe Z Offset calibration to the Z Probe Offsets menu #if BOTH(HAS_BED_PROBE, AUTO_BED_LEVELING_BILINEAR)
#if HAS_BED_PROBE // Add calibration in the Probe Offsets menu to compensate for X-axis twist.
//#define PROBE_OFFSET_WIZARD //#define X_AXIS_TWIST_COMPENSATION
#if ENABLED(PROBE_OFFSET_WIZARD) #if ENABLED(X_AXIS_TWIST_COMPENSATION)
// /**
// Enable to init the Probe Z-Offset when starting the Wizard. * Enable to init the Probe Z-Offset when starting the Wizard.
// Use a height slightly above the estimated nozzle-to-probe Z offset. * Use a height slightly above the estimated nozzle-to-probe Z offset.
// For example, with an offset of -5, consider a starting height of -4. * For example, with an offset of -5, consider a starting height of -4.
// */
//#define PROBE_OFFSET_WIZARD_START_Z -4.0 #define XATC_START_Z 0.0
#define XATC_MAX_POINTS 3 // Number of points to probe in the wizard
// Set a convenient position to do the calibration (probing point and nozzle/bed-distance) #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe
//#define PROBE_OFFSET_WIZARD_XY_POS { X_CENTER, Y_CENTER }
#endif
#if ENABLED(AUTO_BED_LEVELING_BILINEAR)
// Add a calibration procedure in the Probe Offsets menu
// to compensate for twist in the X-axis.
//#define X_AXIS_TWIST_COMPENSATION
#if ENABLED(X_AXIS_TWIST_COMPENSATION)
/**
* Enable to init the Probe Z-Offset when starting the Wizard.
* Use a height slightly above the estimated nozzle-to-probe Z offset.
* For example, with an offset of -5, consider a starting height of -4.
*/
#define XATC_START_Z 0.0
#define XATC_MAX_POINTS 3 // Number of points to probe in the wizard
#define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe
#endif
#endif #endif
#endif #endif

56
config/examples/Anet/ET5-Pro/Configuration_adv.h
View file

@ -1280,37 +1280,35 @@
#define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440
#endif #endif
#if HAS_BED_PROBE && EITHER(HAS_MARLINUI_MENU, HAS_TFT_LVGL_UI)
#define PROBE_OFFSET_WIZARD // Add a Probe Z Offset calibration option to the LCD menu
#if ENABLED(PROBE_OFFSET_WIZARD)
/**
* Enable to init the Probe Z-Offset when starting the Wizard.
* Use a height slightly above the estimated nozzle-to-probe Z offset.
* For example, with an offset of -5, consider a starting height of -4.
*/
#define PROBE_OFFSET_WIZARD_START_Z -4.0
// Set a convenient position to do the calibration (probing point and nozzle/bed-distance)
//#define PROBE_OFFSET_WIZARD_XY_POS { X_CENTER, Y_CENTER }
#endif
#endif
#if HAS_MARLINUI_MENU #if HAS_MARLINUI_MENU
// Add Probe Z Offset calibration to the Z Probe Offsets menu #if BOTH(HAS_BED_PROBE, AUTO_BED_LEVELING_BILINEAR)
#if HAS_BED_PROBE // Add calibration in the Probe Offsets menu to compensate for X-axis twist.
#define PROBE_OFFSET_WIZARD //#define X_AXIS_TWIST_COMPENSATION
#if ENABLED(PROBE_OFFSET_WIZARD) #if ENABLED(X_AXIS_TWIST_COMPENSATION)
// /**
// Enable to init the Probe Z-Offset when starting the Wizard. * Enable to init the Probe Z-Offset when starting the Wizard.
// Use a height slightly above the estimated nozzle-to-probe Z offset. * Use a height slightly above the estimated nozzle-to-probe Z offset.
// For example, with an offset of -5, consider a starting height of -4. * For example, with an offset of -5, consider a starting height of -4.
// */
#define PROBE_OFFSET_WIZARD_START_Z -4.0 #define XATC_START_Z 0.0
#define XATC_MAX_POINTS 3 // Number of points to probe in the wizard
// Set a convenient position to do the calibration (probing point and nozzle/bed-distance) #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe
//#define PROBE_OFFSET_WIZARD_XY_POS { X_CENTER, Y_CENTER }
#endif
#if ENABLED(AUTO_BED_LEVELING_BILINEAR)
// Add a calibration procedure in the Probe Offsets menu
// to compensate for twist in the X-axis.
//#define X_AXIS_TWIST_COMPENSATION
#if ENABLED(X_AXIS_TWIST_COMPENSATION)
/**
* Enable to init the Probe Z-Offset when starting the Wizard.
* Use a height slightly above the estimated nozzle-to-probe Z offset.
* For example, with an offset of -5, consider a starting height of -4.
*/
#define XATC_START_Z 0.0
#define XATC_MAX_POINTS 3 // Number of points to probe in the wizard
#define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe
#endif
#endif #endif
#endif #endif

56
config/examples/Anet/ET5/Configuration_adv.h
View file

@ -1280,37 +1280,35 @@
#define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440
#endif #endif
#if HAS_BED_PROBE && EITHER(HAS_MARLINUI_MENU, HAS_TFT_LVGL_UI)
#define PROBE_OFFSET_WIZARD // Add a Probe Z Offset calibration option to the LCD menu
#if ENABLED(PROBE_OFFSET_WIZARD)
/**
* Enable to init the Probe Z-Offset when starting the Wizard.
* Use a height slightly above the estimated nozzle-to-probe Z offset.
* For example, with an offset of -5, consider a starting height of -4.
*/
#define PROBE_OFFSET_WIZARD_START_Z -4.0
// Set a convenient position to do the calibration (probing point and nozzle/bed-distance)
//#define PROBE_OFFSET_WIZARD_XY_POS { X_CENTER, Y_CENTER }
#endif
#endif
#if HAS_MARLINUI_MENU #if HAS_MARLINUI_MENU
// Add Probe Z Offset calibration to the Z Probe Offsets menu #if BOTH(HAS_BED_PROBE, AUTO_BED_LEVELING_BILINEAR)
#if HAS_BED_PROBE // Add calibration in the Probe Offsets menu to compensate for X-axis twist.
#define PROBE_OFFSET_WIZARD //#define X_AXIS_TWIST_COMPENSATION
#if ENABLED(PROBE_OFFSET_WIZARD) #if ENABLED(X_AXIS_TWIST_COMPENSATION)
// /**
// Enable to init the Probe Z-Offset when starting the Wizard. * Enable to init the Probe Z-Offset when starting the Wizard.
// Use a height slightly above the estimated nozzle-to-probe Z offset. * Use a height slightly above the estimated nozzle-to-probe Z offset.
// For example, with an offset of -5, consider a starting height of -4. * For example, with an offset of -5, consider a starting height of -4.
// */
#define PROBE_OFFSET_WIZARD_START_Z -4.0 #define XATC_START_Z 0.0
#define XATC_MAX_POINTS 3 // Number of points to probe in the wizard
// Set a convenient position to do the calibration (probing point and nozzle/bed-distance) #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe
//#define PROBE_OFFSET_WIZARD_XY_POS { X_CENTER, Y_CENTER }
#endif
#if ENABLED(AUTO_BED_LEVELING_BILINEAR)
// Add a calibration procedure in the Probe Offsets menu
// to compensate for twist in the X-axis.
//#define X_AXIS_TWIST_COMPENSATION
#if ENABLED(X_AXIS_TWIST_COMPENSATION)
/**
* Enable to init the Probe Z-Offset when starting the Wizard.
* Use a height slightly above the estimated nozzle-to-probe Z offset.
* For example, with an offset of -5, consider a starting height of -4.
*/
#define XATC_START_Z 0.0
#define XATC_MAX_POINTS 3 // Number of points to probe in the wizard
#define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe
#endif
#endif #endif
#endif #endif

56
config/examples/Anet/ET5X/Configuration_adv.h
View file

@ -1280,37 +1280,35 @@
#define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440
#endif #endif
#if HAS_BED_PROBE && EITHER(HAS_MARLINUI_MENU, HAS_TFT_LVGL_UI)
#define PROBE_OFFSET_WIZARD // Add a Probe Z Offset calibration option to the LCD menu
#if ENABLED(PROBE_OFFSET_WIZARD)
/**
* Enable to init the Probe Z-Offset when starting the Wizard.
* Use a height slightly above the estimated nozzle-to-probe Z offset.
* For example, with an offset of -5, consider a starting height of -4.
*/
#define PROBE_OFFSET_WIZARD_START_Z -4.0
// Set a convenient position to do the calibration (probing point and nozzle/bed-distance)
//#define PROBE_OFFSET_WIZARD_XY_POS { X_CENTER, Y_CENTER }
#endif
#endif
#if HAS_MARLINUI_MENU #if HAS_MARLINUI_MENU
// Add Probe Z Offset calibration to the Z Probe Offsets menu #if BOTH(HAS_BED_PROBE, AUTO_BED_LEVELING_BILINEAR)
#if HAS_BED_PROBE // Add calibration in the Probe Offsets menu to compensate for X-axis twist.
#define PROBE_OFFSET_WIZARD //#define X_AXIS_TWIST_COMPENSATION
#if ENABLED(PROBE_OFFSET_WIZARD) #if ENABLED(X_AXIS_TWIST_COMPENSATION)
// /**
// Enable to init the Probe Z-Offset when starting the Wizard. * Enable to init the Probe Z-Offset when starting the Wizard.
// Use a height slightly above the estimated nozzle-to-probe Z offset. * Use a height slightly above the estimated nozzle-to-probe Z offset.
// For example, with an offset of -5, consider a starting height of -4. * For example, with an offset of -5, consider a starting height of -4.
// */
#define PROBE_OFFSET_WIZARD_START_Z -4.0 #define XATC_START_Z 0.0
#define XATC_MAX_POINTS 3 // Number of points to probe in the wizard
// Set a convenient position to do the calibration (probing point and nozzle/bed-distance) #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe
//#define PROBE_OFFSET_WIZARD_XY_POS { X_CENTER, Y_CENTER }
#endif
#if ENABLED(AUTO_BED_LEVELING_BILINEAR)
// Add a calibration procedure in the Probe Offsets menu
// to compensate for twist in the X-axis.
//#define X_AXIS_TWIST_COMPENSATION
#if ENABLED(X_AXIS_TWIST_COMPENSATION)
/**
* Enable to init the Probe Z-Offset when starting the Wizard.
* Use a height slightly above the estimated nozzle-to-probe Z offset.
* For example, with an offset of -5, consider a starting height of -4.
*/
#define XATC_START_Z 0.0
#define XATC_MAX_POINTS 3 // Number of points to probe in the wizard
#define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe
#endif
#endif #endif
#endif #endif

56
config/examples/AnyCubic/Chiron/Configuration_adv.h
View file

@ -1280,37 +1280,35 @@
#define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440
#endif #endif
#if HAS_BED_PROBE && EITHER(HAS_MARLINUI_MENU, HAS_TFT_LVGL_UI)
//#define PROBE_OFFSET_WIZARD // Add a Probe Z Offset calibration option to the LCD menu
#if ENABLED(PROBE_OFFSET_WIZARD)
/**
* Enable to init the Probe Z-Offset when starting the Wizard.
* Use a height slightly above the estimated nozzle-to-probe Z offset.
* For example, with an offset of -5, consider a starting height of -4.
*/
//#define PROBE_OFFSET_WIZARD_START_Z -4.0
// Set a convenient position to do the calibration (probing point and nozzle/bed-distance)
//#define PROBE_OFFSET_WIZARD_XY_POS { X_CENTER, Y_CENTER }
#endif
#endif
#if HAS_MARLINUI_MENU #if HAS_MARLINUI_MENU
// Add Probe Z Offset calibration to the Z Probe Offsets menu #if BOTH(HAS_BED_PROBE, AUTO_BED_LEVELING_BILINEAR)
#if HAS_BED_PROBE // Add calibration in the Probe Offsets menu to compensate for X-axis twist.
//#define PROBE_OFFSET_WIZARD //#define X_AXIS_TWIST_COMPENSATION
#if ENABLED(PROBE_OFFSET_WIZARD) #if ENABLED(X_AXIS_TWIST_COMPENSATION)
// /**
// Enable to init the Probe Z-Offset when starting the Wizard. * Enable to init the Probe Z-Offset when starting the Wizard.
// Use a height slightly above the estimated nozzle-to-probe Z offset. * Use a height slightly above the estimated nozzle-to-probe Z offset.
// For example, with an offset of -5, consider a starting height of -4. * For example, with an offset of -5, consider a starting height of -4.
// */
//#define PROBE_OFFSET_WIZARD_START_Z -4.0 #define XATC_START_Z 0.0
#define XATC_MAX_POINTS 3 // Number of points to probe in the wizard
// Set a convenient position to do the calibration (probing point and nozzle/bed-distance) #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe
//#define PROBE_OFFSET_WIZARD_XY_POS { X_CENTER, Y_CENTER }
#endif
#if ENABLED(AUTO_BED_LEVELING_BILINEAR)
// Add a calibration procedure in the Probe Offsets menu
// to compensate for twist in the X-axis.
//#define X_AXIS_TWIST_COMPENSATION
#if ENABLED(X_AXIS_TWIST_COMPENSATION)
/**
* Enable to init the Probe Z-Offset when starting the Wizard.
* Use a height slightly above the estimated nozzle-to-probe Z offset.
* For example, with an offset of -5, consider a starting height of -4.
*/
#define XATC_START_Z 0.0
#define XATC_MAX_POINTS 3 // Number of points to probe in the wizard
#define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe
#endif
#endif #endif
#endif #endif

56
config/examples/AnyCubic/Mega Zero 2.0/Anycubic V1/Configuration_adv.h
View file

@ -1280,37 +1280,35 @@
#define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440
#endif #endif
#if HAS_BED_PROBE && EITHER(HAS_MARLINUI_MENU, HAS_TFT_LVGL_UI)
//#define PROBE_OFFSET_WIZARD // Add a Probe Z Offset calibration option to the LCD menu
#if ENABLED(PROBE_OFFSET_WIZARD)
/**
* Enable to init the Probe Z-Offset when starting the Wizard.
* Use a height slightly above the estimated nozzle-to-probe Z offset.
* For example, with an offset of -5, consider a starting height of -4.
*/
//#define PROBE_OFFSET_WIZARD_START_Z -4.0
// Set a convenient position to do the calibration (probing point and nozzle/bed-distance)
//#define PROBE_OFFSET_WIZARD_XY_POS { X_CENTER, Y_CENTER }
#endif
#endif
#if HAS_MARLINUI_MENU #if HAS_MARLINUI_MENU
// Add Probe Z Offset calibration to the Z Probe Offsets menu #if BOTH(HAS_BED_PROBE, AUTO_BED_LEVELING_BILINEAR)
#if HAS_BED_PROBE // Add calibration in the Probe Offsets menu to compensate for X-axis twist.
//#define PROBE_OFFSET_WIZARD //#define X_AXIS_TWIST_COMPENSATION
#if ENABLED(PROBE_OFFSET_WIZARD) #if ENABLED(X_AXIS_TWIST_COMPENSATION)
// /**
// Enable to init the Probe Z-Offset when starting the Wizard. * Enable to init the Probe Z-Offset when starting the Wizard.
// Use a height slightly above the estimated nozzle-to-probe Z offset. * Use a height slightly above the estimated nozzle-to-probe Z offset.
// For example, with an offset of -5, consider a starting height of -4. * For example, with an offset of -5, consider a starting height of -4.
// */
//#define PROBE_OFFSET_WIZARD_START_Z -4.0 #define XATC_START_Z 0.0
#define XATC_MAX_POINTS 3 // Number of points to probe in the wizard
// Set a convenient position to do the calibration (probing point and nozzle/bed-distance) #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe
//#define PROBE_OFFSET_WIZARD_XY_POS { X_CENTER, Y_CENTER }
#endif
#if ENABLED(AUTO_BED_LEVELING_BILINEAR)
// Add a calibration procedure in the Probe Offsets menu
// to compensate for twist in the X-axis.
//#define X_AXIS_TWIST_COMPENSATION
#if ENABLED(X_AXIS_TWIST_COMPENSATION)
/**
* Enable to init the Probe Z-Offset when starting the Wizard.
* Use a height slightly above the estimated nozzle-to-probe Z offset.
* For example, with an offset of -5, consider a starting height of -4.
*/
#define XATC_START_Z 0.0
#define XATC_MAX_POINTS 3 // Number of points to probe in the wizard
#define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe
#endif
#endif #endif
#endif #endif

56
config/examples/AnyCubic/Mega Zero/Anycubic V1/Configuration_adv.h
View file

@ -1280,37 +1280,35 @@
#define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440
#endif #endif
#if HAS_BED_PROBE && EITHER(HAS_MARLINUI_MENU, HAS_TFT_LVGL_UI)
//#define PROBE_OFFSET_WIZARD // Add a Probe Z Offset calibration option to the LCD menu
#if ENABLED(PROBE_OFFSET_WIZARD)
/**
* Enable to init the Probe Z-Offset when starting the Wizard.
* Use a height slightly above the estimated nozzle-to-probe Z offset.
* For example, with an offset of -5, consider a starting height of -4.
*/
//#define PROBE_OFFSET_WIZARD_START_Z -4.0
// Set a convenient position to do the calibration (probing point and nozzle/bed-distance)
//#define PROBE_OFFSET_WIZARD_XY_POS { X_CENTER, Y_CENTER }
#endif
#endif
#if HAS_MARLINUI_MENU #if HAS_MARLINUI_MENU
// Add Probe Z Offset calibration to the Z Probe Offsets menu #if BOTH(HAS_BED_PROBE, AUTO_BED_LEVELING_BILINEAR)
#if HAS_BED_PROBE // Add calibration in the Probe Offsets menu to compensate for X-axis twist.
//#define PROBE_OFFSET_WIZARD //#define X_AXIS_TWIST_COMPENSATION
#if ENABLED(PROBE_OFFSET_WIZARD) #if ENABLED(X_AXIS_TWIST_COMPENSATION)
// /**
// Enable to init the Probe Z-Offset when starting the Wizard. * Enable to init the Probe Z-Offset when starting the Wizard.
// Use a height slightly above the estimated nozzle-to-probe Z offset. * Use a height slightly above the estimated nozzle-to-probe Z offset.
// For example, with an offset of -5, consider a starting height of -4. * For example, with an offset of -5, consider a starting height of -4.
// */
//#define PROBE_OFFSET_WIZARD_START_Z -4.0 #define XATC_START_Z 0.0
#define XATC_MAX_POINTS 3 // Number of points to probe in the wizard
// Set a convenient position to do the calibration (probing point and nozzle/bed-distance) #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe
//#define PROBE_OFFSET_WIZARD_XY_POS { X_CENTER, Y_CENTER }
#endif
#if ENABLED(AUTO_BED_LEVELING_BILINEAR)
// Add a calibration procedure in the Probe Offsets menu
// to compensate for twist in the X-axis.
//#define X_AXIS_TWIST_COMPENSATION
#if ENABLED(X_AXIS_TWIST_COMPENSATION)
/**
* Enable to init the Probe Z-Offset when starting the Wizard.
* Use a height slightly above the estimated nozzle-to-probe Z offset.
* For example, with an offset of -5, consider a starting height of -4.
*/
#define XATC_START_Z 0.0
#define XATC_MAX_POINTS 3 // Number of points to probe in the wizard
#define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe
#endif
#endif #endif
#endif #endif

56
config/examples/AnyCubic/Mega Zero/BigTreeTech SKR Mini MZ V1.0/Configuration_adv.h
View file

@ -1280,37 +1280,35 @@
#define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440
#endif #endif
#if HAS_BED_PROBE && EITHER(HAS_MARLINUI_MENU, HAS_TFT_LVGL_UI)
//#define PROBE_OFFSET_WIZARD // Add a Probe Z Offset calibration option to the LCD menu
#if ENABLED(PROBE_OFFSET_WIZARD)
/**
* Enable to init the Probe Z-Offset when starting the Wizard.
* Use a height slightly above the estimated nozzle-to-probe Z offset.
* For example, with an offset of -5, consider a starting height of -4.
*/
//#define PROBE_OFFSET_WIZARD_START_Z -4.0
// Set a convenient position to do the calibration (probing point and nozzle/bed-distance)
//#define PROBE_OFFSET_WIZARD_XY_POS { X_CENTER, Y_CENTER }
#endif
#endif
#if HAS_MARLINUI_MENU #if HAS_MARLINUI_MENU
// Add Probe Z Offset calibration to the Z Probe Offsets menu #if BOTH(HAS_BED_PROBE, AUTO_BED_LEVELING_BILINEAR)
#if HAS_BED_PROBE // Add calibration in the Probe Offsets menu to compensate for X-axis twist.
//#define PROBE_OFFSET_WIZARD //#define X_AXIS_TWIST_COMPENSATION
#if ENABLED(PROBE_OFFSET_WIZARD) #if ENABLED(X_AXIS_TWIST_COMPENSATION)
// /**
// Enable to init the Probe Z-Offset when starting the Wizard. * Enable to init the Probe Z-Offset when starting the Wizard.
// Use a height slightly above the estimated nozzle-to-probe Z offset. * Use a height slightly above the estimated nozzle-to-probe Z offset.
// For example, with an offset of -5, consider a starting height of -4. * For example, with an offset of -5, consider a starting height of -4.
// */
//#define PROBE_OFFSET_WIZARD_START_Z -4.0 #define XATC_START_Z 0.0
#define XATC_MAX_POINTS 3 // Number of points to probe in the wizard
// Set a convenient position to do the calibration (probing point and nozzle/bed-distance) #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe
//#define PROBE_OFFSET_WIZARD_XY_POS { X_CENTER, Y_CENTER }
#endif
#if ENABLED(AUTO_BED_LEVELING_BILINEAR)
// Add a calibration procedure in the Probe Offsets menu
// to compensate for twist in the X-axis.
//#define X_AXIS_TWIST_COMPENSATION
#if ENABLED(X_AXIS_TWIST_COMPENSATION)
/**
* Enable to init the Probe Z-Offset when starting the Wizard.
* Use a height slightly above the estimated nozzle-to-probe Z offset.
* For example, with an offset of -5, consider a starting height of -4.
*/
#define XATC_START_Z 0.0
#define XATC_MAX_POINTS 3 // Number of points to probe in the wizard
#define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe
#endif
#endif #endif
#endif #endif

56
config/examples/AnyCubic/i3 Mega/Configuration_adv.h
View file

@ -1280,37 +1280,35 @@
#define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440
#endif #endif
#if HAS_BED_PROBE && EITHER(HAS_MARLINUI_MENU, HAS_TFT_LVGL_UI)
//#define PROBE_OFFSET_WIZARD // Add a Probe Z Offset calibration option to the LCD menu
#if ENABLED(PROBE_OFFSET_WIZARD)
/**
* Enable to init the Probe Z-Offset when starting the Wizard.
* Use a height slightly above the estimated nozzle-to-probe Z offset.
* For example, with an offset of -5, consider a starting height of -4.
*/
//#define PROBE_OFFSET_WIZARD_START_Z -4.0
// Set a convenient position to do the calibration (probing point and nozzle/bed-distance)
//#define PROBE_OFFSET_WIZARD_XY_POS { X_CENTER, Y_CENTER }
#endif
#endif
#if HAS_MARLINUI_MENU #if HAS_MARLINUI_MENU
// Add Probe Z Offset calibration to the Z Probe Offsets menu #if BOTH(HAS_BED_PROBE, AUTO_BED_LEVELING_BILINEAR)
#if HAS_BED_PROBE // Add calibration in the Probe Offsets menu to compensate for X-axis twist.
//#define PROBE_OFFSET_WIZARD //#define X_AXIS_TWIST_COMPENSATION
#if ENABLED(PROBE_OFFSET_WIZARD) #if ENABLED(X_AXIS_TWIST_COMPENSATION)
// /**
// Enable to init the Probe Z-Offset when starting the Wizard. * Enable to init the Probe Z-Offset when starting the Wizard.
// Use a height slightly above the estimated nozzle-to-probe Z offset. * Use a height slightly above the estimated nozzle-to-probe Z offset.
// For example, with an offset of -5, consider a starting height of -4. * For example, with an offset of -5, consider a starting height of -4.
// */
//#define PROBE_OFFSET_WIZARD_START_Z -4.0 #define XATC_START_Z 0.0
#define XATC_MAX_POINTS 3 // Number of points to probe in the wizard
// Set a convenient position to do the calibration (probing point and nozzle/bed-distance) #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe
//#define PROBE_OFFSET_WIZARD_XY_POS { X_CENTER, Y_CENTER }
#endif
#if ENABLED(AUTO_BED_LEVELING_BILINEAR)
// Add a calibration procedure in the Probe Offsets menu
// to compensate for twist in the X-axis.
//#define X_AXIS_TWIST_COMPENSATION
#if ENABLED(X_AXIS_TWIST_COMPENSATION)
/**
* Enable to init the Probe Z-Offset when starting the Wizard.
* Use a height slightly above the estimated nozzle-to-probe Z offset.
* For example, with an offset of -5, consider a starting height of -4.
*/
#define XATC_START_Z 0.0
#define XATC_MAX_POINTS 3 // Number of points to probe in the wizard
#define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe
#endif
#endif #endif
#endif #endif

56
config/examples/AnyCubic/i3/Configuration_adv.h
View file

@ -1280,37 +1280,35 @@
#define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440
#endif #endif
#if HAS_BED_PROBE && EITHER(HAS_MARLINUI_MENU, HAS_TFT_LVGL_UI)
//#define PROBE_OFFSET_WIZARD // Add a Probe Z Offset calibration option to the LCD menu
#if ENABLED(PROBE_OFFSET_WIZARD)
/**
* Enable to init the Probe Z-Offset when starting the Wizard.
* Use a height slightly above the estimated nozzle-to-probe Z offset.
* For example, with an offset of -5, consider a starting height of -4.
*/
//#define PROBE_OFFSET_WIZARD_START_Z -4.0
// Set a convenient position to do the calibration (probing point and nozzle/bed-distance)
//#define PROBE_OFFSET_WIZARD_XY_POS { X_CENTER, Y_CENTER }
#endif
#endif
#if HAS_MARLINUI_MENU #if HAS_MARLINUI_MENU
// Add Probe Z Offset calibration to the Z Probe Offsets menu #if BOTH(HAS_BED_PROBE, AUTO_BED_LEVELING_BILINEAR)
#if HAS_BED_PROBE // Add calibration in the Probe Offsets menu to compensate for X-axis twist.
//#define PROBE_OFFSET_WIZARD //#define X_AXIS_TWIST_COMPENSATION
#if ENABLED(PROBE_OFFSET_WIZARD) #if ENABLED(X_AXIS_TWIST_COMPENSATION)
// /**
// Enable to init the Probe Z-Offset when starting the Wizard. * Enable to init the Probe Z-Offset when starting the Wizard.
// Use a height slightly above the estimated nozzle-to-probe Z offset. * Use a height slightly above the estimated nozzle-to-probe Z offset.
// For example, with an offset of -5, consider a starting height of -4. * For example, with an offset of -5, consider a starting height of -4.
// */
//#define PROBE_OFFSET_WIZARD_START_Z -4.0 #define XATC_START_Z 0.0
#define XATC_MAX_POINTS 3 // Number of points to probe in the wizard
// Set a convenient position to do the calibration (probing point and nozzle/bed-distance) #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe
//#define PROBE_OFFSET_WIZARD_XY_POS { X_CENTER, Y_CENTER }
#endif
#if ENABLED(AUTO_BED_LEVELING_BILINEAR)
// Add a calibration procedure in the Probe Offsets menu
// to compensate for twist in the X-axis.
//#define X_AXIS_TWIST_COMPENSATION
#if ENABLED(X_AXIS_TWIST_COMPENSATION)
/**
* Enable to init the Probe Z-Offset when starting the Wizard.
* Use a height slightly above the estimated nozzle-to-probe Z offset.
* For example, with an offset of -5, consider a starting height of -4.
*/
#define XATC_START_Z 0.0
#define XATC_MAX_POINTS 3 // Number of points to probe in the wizard
#define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe
#endif
#endif #endif
#endif #endif

56
config/examples/ArmEd/Configuration_adv.h
View file

@ -1284,37 +1284,35 @@
#define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440
#endif #endif
#if HAS_BED_PROBE && EITHER(HAS_MARLINUI_MENU, HAS_TFT_LVGL_UI)
//#define PROBE_OFFSET_WIZARD // Add a Probe Z Offset calibration option to the LCD menu
#if ENABLED(PROBE_OFFSET_WIZARD)
/**
* Enable to init the Probe Z-Offset when starting the Wizard.
* Use a height slightly above the estimated nozzle-to-probe Z offset.
* For example, with an offset of -5, consider a starting height of -4.
*/
//#define PROBE_OFFSET_WIZARD_START_Z -4.0
// Set a convenient position to do the calibration (probing point and nozzle/bed-distance)
//#define PROBE_OFFSET_WIZARD_XY_POS { X_CENTER, Y_CENTER }
#endif
#endif
#if HAS_MARLINUI_MENU #if HAS_MARLINUI_MENU
// Add Probe Z Offset calibration to the Z Probe Offsets menu #if BOTH(HAS_BED_PROBE, AUTO_BED_LEVELING_BILINEAR)
#if HAS_BED_PROBE // Add calibration in the Probe Offsets menu to compensate for X-axis twist.
//#define PROBE_OFFSET_WIZARD //#define X_AXIS_TWIST_COMPENSATION
#if ENABLED(PROBE_OFFSET_WIZARD) #if ENABLED(X_AXIS_TWIST_COMPENSATION)
// /**
// Enable to init the Probe Z-Offset when starting the Wizard. * Enable to init the Probe Z-Offset when starting the Wizard.
// Use a height slightly above the estimated nozzle-to-probe Z offset. * Use a height slightly above the estimated nozzle-to-probe Z offset.
// For example, with an offset of -5, consider a starting height of -4. * For example, with an offset of -5, consider a starting height of -4.
// */
//#define PROBE_OFFSET_WIZARD_START_Z -4.0 #define XATC_START_Z 0.0
#define XATC_MAX_POINTS 3 // Number of points to probe in the wizard
// Set a convenient position to do the calibration (probing point and nozzle/bed-distance) #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe
//#define PROBE_OFFSET_WIZARD_XY_POS { X_CENTER, Y_CENTER }
#endif
#if ENABLED(AUTO_BED_LEVELING_BILINEAR)
// Add a calibration procedure in the Probe Offsets menu
// to compensate for twist in the X-axis.
//#define X_AXIS_TWIST_COMPENSATION
#if ENABLED(X_AXIS_TWIST_COMPENSATION)
/**
* Enable to init the Probe Z-Offset when starting the Wizard.
* Use a height slightly above the estimated nozzle-to-probe Z offset.
* For example, with an offset of -5, consider a starting height of -4.
*/
#define XATC_START_Z 0.0
#define XATC_MAX_POINTS 3 // Number of points to probe in the wizard
#define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe
#endif
#endif #endif
#endif #endif

56
config/examples/Artillery/Genius Pro/Configuration_adv.h
View file

@ -1280,37 +1280,35 @@
#define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440
#endif #endif
#if HAS_BED_PROBE && EITHER(HAS_MARLINUI_MENU, HAS_TFT_LVGL_UI)
//#define PROBE_OFFSET_WIZARD // Add a Probe Z Offset calibration option to the LCD menu
#if ENABLED(PROBE_OFFSET_WIZARD)
/**
* Enable to init the Probe Z-Offset when starting the Wizard.
* Use a height slightly above the estimated nozzle-to-probe Z offset.
* For example, with an offset of -5, consider a starting height of -4.
*/
//#define PROBE_OFFSET_WIZARD_START_Z -4.0
// Set a convenient position to do the calibration (probing point and nozzle/bed-distance)
//#define PROBE_OFFSET_WIZARD_XY_POS { X_CENTER, Y_CENTER }
#endif
#endif
#if HAS_MARLINUI_MENU #if HAS_MARLINUI_MENU
// Add Probe Z Offset calibration to the Z Probe Offsets menu #if BOTH(HAS_BED_PROBE, AUTO_BED_LEVELING_BILINEAR)
#if HAS_BED_PROBE // Add calibration in the Probe Offsets menu to compensate for X-axis twist.
//#define PROBE_OFFSET_WIZARD //#define X_AXIS_TWIST_COMPENSATION
#if ENABLED(PROBE_OFFSET_WIZARD) #if ENABLED(X_AXIS_TWIST_COMPENSATION)
// /**
// Enable to init the Probe Z-Offset when starting the Wizard. * Enable to init the Probe Z-Offset when starting the Wizard.
// Use a height slightly above the estimated nozzle-to-probe Z offset. * Use a height slightly above the estimated nozzle-to-probe Z offset.
// For example, with an offset of -5, consider a starting height of -4. * For example, with an offset of -5, consider a starting height of -4.
// */
//#define PROBE_OFFSET_WIZARD_START_Z -4.0 #define XATC_START_Z 0.0
#define XATC_MAX_POINTS 3 // Number of points to probe in the wizard
// Set a convenient position to do the calibration (probing point and nozzle/bed-distance) #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe
//#define PROBE_OFFSET_WIZARD_XY_POS { X_CENTER, Y_CENTER }
#endif
#if ENABLED(AUTO_BED_LEVELING_BILINEAR)
// Add a calibration procedure in the Probe Offsets menu
// to compensate for twist in the X-axis.
//#define X_AXIS_TWIST_COMPENSATION
#if ENABLED(X_AXIS_TWIST_COMPENSATION)
/**
* Enable to init the Probe Z-Offset when starting the Wizard.
* Use a height slightly above the estimated nozzle-to-probe Z offset.
* For example, with an offset of -5, consider a starting height of -4.
*/
#define XATC_START_Z 0.0
#define XATC_MAX_POINTS 3 // Number of points to probe in the wizard
#define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe
#endif
#endif #endif
#endif #endif

56
config/examples/Artillery/Genius/BLTouch/Configuration_adv.h
View file

@ -1280,37 +1280,35 @@
#define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440
#endif #endif
#if HAS_BED_PROBE && EITHER(HAS_MARLINUI_MENU, HAS_TFT_LVGL_UI)
//#define PROBE_OFFSET_WIZARD // Add a Probe Z Offset calibration option to the LCD menu
#if ENABLED(PROBE_OFFSET_WIZARD)
/**
* Enable to init the Probe Z-Offset when starting the Wizard.
* Use a height slightly above the estimated nozzle-to-probe Z offset.
* For example, with an offset of -5, consider a starting height of -4.
*/
//#define PROBE_OFFSET_WIZARD_START_Z -4.0
// Set a convenient position to do the calibration (probing point and nozzle/bed-distance)
//#define PROBE_OFFSET_WIZARD_XY_POS { X_CENTER, Y_CENTER }
#endif
#endif
#if HAS_MARLINUI_MENU #if HAS_MARLINUI_MENU
// Add Probe Z Offset calibration to the Z Probe Offsets menu #if BOTH(HAS_BED_PROBE, AUTO_BED_LEVELING_BILINEAR)
#if HAS_BED_PROBE // Add calibration in the Probe Offsets menu to compensate for X-axis twist.
//#define PROBE_OFFSET_WIZARD //#define X_AXIS_TWIST_COMPENSATION
#if ENABLED(PROBE_OFFSET_WIZARD) #if ENABLED(X_AXIS_TWIST_COMPENSATION)
// /**
// Enable to init the Probe Z-Offset when starting the Wizard. * Enable to init the Probe Z-Offset when starting the Wizard.
// Use a height slightly above the estimated nozzle-to-probe Z offset. * Use a height slightly above the estimated nozzle-to-probe Z offset.
// For example, with an offset of -5, consider a starting height of -4. * For example, with an offset of -5, consider a starting height of -4.
// */
//#define PROBE_OFFSET_WIZARD_START_Z -4.0 #define XATC_START_Z 0.0
#define XATC_MAX_POINTS 3 // Number of points to probe in the wizard
// Set a convenient position to do the calibration (probing point and nozzle/bed-distance) #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe
//#define PROBE_OFFSET_WIZARD_XY_POS { X_CENTER, Y_CENTER }
#endif
#if ENABLED(AUTO_BED_LEVELING_BILINEAR)
// Add a calibration procedure in the Probe Offsets menu
// to compensate for twist in the X-axis.
//#define X_AXIS_TWIST_COMPENSATION
#if ENABLED(X_AXIS_TWIST_COMPENSATION)
/**
* Enable to init the Probe Z-Offset when starting the Wizard.
* Use a height slightly above the estimated nozzle-to-probe Z offset.
* For example, with an offset of -5, consider a starting height of -4.
*/
#define XATC_START_Z 0.0
#define XATC_MAX_POINTS 3 // Number of points to probe in the wizard
#define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe
#endif
#endif #endif
#endif #endif

56
config/examples/Artillery/Genius/V1/Configuration_adv.h
View file

@ -1280,37 +1280,35 @@
#define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440
#endif #endif
#if HAS_BED_PROBE && EITHER(HAS_MARLINUI_MENU, HAS_TFT_LVGL_UI)
//#define PROBE_OFFSET_WIZARD // Add a Probe Z Offset calibration option to the LCD menu
#if ENABLED(PROBE_OFFSET_WIZARD)
/**
* Enable to init the Probe Z-Offset when starting the Wizard.
* Use a height slightly above the estimated nozzle-to-probe Z offset.
* For example, with an offset of -5, consider a starting height of -4.
*/
//#define PROBE_OFFSET_WIZARD_START_Z -4.0
// Set a convenient position to do the calibration (probing point and nozzle/bed-distance)
//#define PROBE_OFFSET_WIZARD_XY_POS { X_CENTER, Y_CENTER }
#endif
#endif
#if HAS_MARLINUI_MENU #if HAS_MARLINUI_MENU
// Add Probe Z Offset calibration to the Z Probe Offsets menu #if BOTH(HAS_BED_PROBE, AUTO_BED_LEVELING_BILINEAR)
#if HAS_BED_PROBE // Add calibration in the Probe Offsets menu to compensate for X-axis twist.
//#define PROBE_OFFSET_WIZARD //#define X_AXIS_TWIST_COMPENSATION
#if ENABLED(PROBE_OFFSET_WIZARD) #if ENABLED(X_AXIS_TWIST_COMPENSATION)
// /**
// Enable to init the Probe Z-Offset when starting the Wizard. * Enable to init the Probe Z-Offset when starting the Wizard.
// Use a height slightly above the estimated nozzle-to-probe Z offset. * Use a height slightly above the estimated nozzle-to-probe Z offset.
// For example, with an offset of -5, consider a starting height of -4. * For example, with an offset of -5, consider a starting height of -4.
// */
//#define PROBE_OFFSET_WIZARD_START_Z -4.0 #define XATC_START_Z 0.0
#define XATC_MAX_POINTS 3 // Number of points to probe in the wizard
// Set a convenient position to do the calibration (probing point and nozzle/bed-distance) #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe
//#define PROBE_OFFSET_WIZARD_XY_POS { X_CENTER, Y_CENTER }
#endif
#if ENABLED(AUTO_BED_LEVELING_BILINEAR)
// Add a calibration procedure in the Probe Offsets menu
// to compensate for twist in the X-axis.
//#define X_AXIS_TWIST_COMPENSATION
#if ENABLED(X_AXIS_TWIST_COMPENSATION)
/**
* Enable to init the Probe Z-Offset when starting the Wizard.
* Use a height slightly above the estimated nozzle-to-probe Z offset.
* For example, with an offset of -5, consider a starting height of -4.
*/
#define XATC_START_Z 0.0
#define XATC_MAX_POINTS 3 // Number of points to probe in the wizard
#define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe
#endif
#endif #endif
#endif #endif

56
config/examples/Artillery/Hornet/Configuration_adv.h
View file

@ -1280,37 +1280,35 @@
#define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440
#endif #endif
#if HAS_BED_PROBE && EITHER(HAS_MARLINUI_MENU, HAS_TFT_LVGL_UI)
//#define PROBE_OFFSET_WIZARD // Add a Probe Z Offset calibration option to the LCD menu
#if ENABLED(PROBE_OFFSET_WIZARD)
/**
* Enable to init the Probe Z-Offset when starting the Wizard.
* Use a height slightly above the estimated nozzle-to-probe Z offset.
* For example, with an offset of -5, consider a starting height of -4.
*/
//#define PROBE_OFFSET_WIZARD_START_Z -4.0
// Set a convenient position to do the calibration (probing point and nozzle/bed-distance)
//#define PROBE_OFFSET_WIZARD_XY_POS { X_CENTER, Y_CENTER }
#endif
#endif
#if HAS_MARLINUI_MENU #if HAS_MARLINUI_MENU
// Add Probe Z Offset calibration to the Z Probe Offsets menu #if BOTH(HAS_BED_PROBE, AUTO_BED_LEVELING_BILINEAR)
#if HAS_BED_PROBE // Add calibration in the Probe Offsets menu to compensate for X-axis twist.
//#define PROBE_OFFSET_WIZARD //#define X_AXIS_TWIST_COMPENSATION
#if ENABLED(PROBE_OFFSET_WIZARD) #if ENABLED(X_AXIS_TWIST_COMPENSATION)
// /**
// Enable to init the Probe Z-Offset when starting the Wizard. * Enable to init the Probe Z-Offset when starting the Wizard.
// Use a height slightly above the estimated nozzle-to-probe Z offset. * Use a height slightly above the estimated nozzle-to-probe Z offset.
// For example, with an offset of -5, consider a starting height of -4. * For example, with an offset of -5, consider a starting height of -4.
// */
//#define PROBE_OFFSET_WIZARD_START_Z -4.0 #define XATC_START_Z 0.0
#define XATC_MAX_POINTS 3 // Number of points to probe in the wizard
// Set a convenient position to do the calibration (probing point and nozzle/bed-distance) #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe
//#define PROBE_OFFSET_WIZARD_XY_POS { X_CENTER, Y_CENTER }
#endif
#if ENABLED(AUTO_BED_LEVELING_BILINEAR)
// Add a calibration procedure in the Probe Offsets menu
// to compensate for twist in the X-axis.
//#define X_AXIS_TWIST_COMPENSATION
#if ENABLED(X_AXIS_TWIST_COMPENSATION)
/**
* Enable to init the Probe Z-Offset when starting the Wizard.
* Use a height slightly above the estimated nozzle-to-probe Z offset.
* For example, with an offset of -5, consider a starting height of -4.
*/
#define XATC_START_Z 0.0
#define XATC_MAX_POINTS 3 // Number of points to probe in the wizard
#define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe
#endif
#endif #endif
#endif #endif

56
config/examples/Artillery/Sidewinder X1/0.9 BMG - E3D V6/Configuration_adv.h
View file

@ -1280,37 +1280,35 @@
#define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440
#endif #endif
#if HAS_BED_PROBE && EITHER(HAS_MARLINUI_MENU, HAS_TFT_LVGL_UI)
//#define PROBE_OFFSET_WIZARD // Add a Probe Z Offset calibration option to the LCD menu
#if ENABLED(PROBE_OFFSET_WIZARD)
/**
* Enable to init the Probe Z-Offset when starting the Wizard.
* Use a height slightly above the estimated nozzle-to-probe Z offset.
* For example, with an offset of -5, consider a starting height of -4.
*/
//#define PROBE_OFFSET_WIZARD_START_Z -4.0
// Set a convenient position to do the calibration (probing point and nozzle/bed-distance)
//#define PROBE_OFFSET_WIZARD_XY_POS { X_CENTER, Y_CENTER }
#endif
#endif
#if HAS_MARLINUI_MENU #if HAS_MARLINUI_MENU
// Add Probe Z Offset calibration to the Z Probe Offsets menu #if BOTH(HAS_BED_PROBE, AUTO_BED_LEVELING_BILINEAR)
#if HAS_BED_PROBE // Add calibration in the Probe Offsets menu to compensate for X-axis twist.
//#define PROBE_OFFSET_WIZARD //#define X_AXIS_TWIST_COMPENSATION
#if ENABLED(PROBE_OFFSET_WIZARD) #if ENABLED(X_AXIS_TWIST_COMPENSATION)
// /**
// Enable to init the Probe Z-Offset when starting the Wizard. * Enable to init the Probe Z-Offset when starting the Wizard.
// Use a height slightly above the estimated nozzle-to-probe Z offset. * Use a height slightly above the estimated nozzle-to-probe Z offset.
// For example, with an offset of -5, consider a starting height of -4. * For example, with an offset of -5, consider a starting height of -4.
// */
//#define PROBE_OFFSET_WIZARD_START_Z -4.0 #define XATC_START_Z 0.0
#define XATC_MAX_POINTS 3 // Number of points to probe in the wizard
// Set a convenient position to do the calibration (probing point and nozzle/bed-distance) #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe
//#define PROBE_OFFSET_WIZARD_XY_POS { X_CENTER, Y_CENTER }
#endif
#if ENABLED(AUTO_BED_LEVELING_BILINEAR)
// Add a calibration procedure in the Probe Offsets menu
// to compensate for twist in the X-axis.
//#define X_AXIS_TWIST_COMPENSATION
#if ENABLED(X_AXIS_TWIST_COMPENSATION)
/**
* Enable to init the Probe Z-Offset when starting the Wizard.
* Use a height slightly above the estimated nozzle-to-probe Z offset.
* For example, with an offset of -5, consider a starting height of -4.
*/
#define XATC_START_Z 0.0
#define XATC_MAX_POINTS 3 // Number of points to probe in the wizard
#define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe
#endif
#endif #endif
#endif #endif

56
config/examples/Artillery/Sidewinder X1/V1/Configuration_adv.h
View file

@ -1280,37 +1280,35 @@
#define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440
#endif #endif
#if HAS_BED_PROBE && EITHER(HAS_MARLINUI_MENU, HAS_TFT_LVGL_UI)
//#define PROBE_OFFSET_WIZARD // Add a Probe Z Offset calibration option to the LCD menu
#if ENABLED(PROBE_OFFSET_WIZARD)
/**
* Enable to init the Probe Z-Offset when starting the Wizard.
* Use a height slightly above the estimated nozzle-to-probe Z offset.
* For example, with an offset of -5, consider a starting height of -4.
*/
//#define PROBE_OFFSET_WIZARD_START_Z -4.0
// Set a convenient position to do the calibration (probing point and nozzle/bed-distance)
//#define PROBE_OFFSET_WIZARD_XY_POS { X_CENTER, Y_CENTER }
#endif
#endif
#if HAS_MARLINUI_MENU #if HAS_MARLINUI_MENU
// Add Probe Z Offset calibration to the Z Probe Offsets menu #if BOTH(HAS_BED_PROBE, AUTO_BED_LEVELING_BILINEAR)
#if HAS_BED_PROBE // Add calibration in the Probe Offsets menu to compensate for X-axis twist.
//#define PROBE_OFFSET_WIZARD //#define X_AXIS_TWIST_COMPENSATION
#if ENABLED(PROBE_OFFSET_WIZARD) #if ENABLED(X_AXIS_TWIST_COMPENSATION)
// /**
// Enable to init the Probe Z-Offset when starting the Wizard. * Enable to init the Probe Z-Offset when starting the Wizard.
// Use a height slightly above the estimated nozzle-to-probe Z offset. * Use a height slightly above the estimated nozzle-to-probe Z offset.
// For example, with an offset of -5, consider a starting height of -4. * For example, with an offset of -5, consider a starting height of -4.
// */
//#define PROBE_OFFSET_WIZARD_START_Z -4.0 #define XATC_START_Z 0.0
#define XATC_MAX_POINTS 3 // Number of points to probe in the wizard
// Set a convenient position to do the calibration (probing point and nozzle/bed-distance) #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe
//#define PROBE_OFFSET_WIZARD_XY_POS { X_CENTER, Y_CENTER }
#endif
#if ENABLED(AUTO_BED_LEVELING_BILINEAR)
// Add a calibration procedure in the Probe Offsets menu
// to compensate for twist in the X-axis.
//#define X_AXIS_TWIST_COMPENSATION
#if ENABLED(X_AXIS_TWIST_COMPENSATION)
/**
* Enable to init the Probe Z-Offset when starting the Wizard.
* Use a height slightly above the estimated nozzle-to-probe Z offset.
* For example, with an offset of -5, consider a starting height of -4.
*/
#define XATC_START_Z 0.0
#define XATC_MAX_POINTS 3 // Number of points to probe in the wizard
#define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe
#endif
#endif #endif
#endif #endif

56
config/examples/Artillery/Sidewinder X2/Configuration_adv.h
View file

@ -1280,37 +1280,35 @@
#define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440
#endif #endif
#if HAS_BED_PROBE && EITHER(HAS_MARLINUI_MENU, HAS_TFT_LVGL_UI)
//#define PROBE_OFFSET_WIZARD // Add a Probe Z Offset calibration option to the LCD menu
#if ENABLED(PROBE_OFFSET_WIZARD)
/**
* Enable to init the Probe Z-Offset when starting the Wizard.
* Use a height slightly above the estimated nozzle-to-probe Z offset.
* For example, with an offset of -5, consider a starting height of -4.
*/
//#define PROBE_OFFSET_WIZARD_START_Z -4.0
// Set a convenient position to do the calibration (probing point and nozzle/bed-distance)
//#define PROBE_OFFSET_WIZARD_XY_POS { X_CENTER, Y_CENTER }
#endif
#endif
#if HAS_MARLINUI_MENU #if HAS_MARLINUI_MENU
// Add Probe Z Offset calibration to the Z Probe Offsets menu #if BOTH(HAS_BED_PROBE, AUTO_BED_LEVELING_BILINEAR)
#if HAS_BED_PROBE // Add calibration in the Probe Offsets menu to compensate for X-axis twist.
//#define PROBE_OFFSET_WIZARD //#define X_AXIS_TWIST_COMPENSATION
#if ENABLED(PROBE_OFFSET_WIZARD) #if ENABLED(X_AXIS_TWIST_COMPENSATION)
// /**
// Enable to init the Probe Z-Offset when starting the Wizard. * Enable to init the Probe Z-Offset when starting the Wizard.
// Use a height slightly above the estimated nozzle-to-probe Z offset. * Use a height slightly above the estimated nozzle-to-probe Z offset.
// For example, with an offset of -5, consider a starting height of -4. * For example, with an offset of -5, consider a starting height of -4.
// */
//#define PROBE_OFFSET_WIZARD_START_Z -4.0 #define XATC_START_Z 0.0
#define XATC_MAX_POINTS 3 // Number of points to probe in the wizard
// Set a convenient position to do the calibration (probing point and nozzle/bed-distance) #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe
//#define PROBE_OFFSET_WIZARD_XY_POS { X_CENTER, Y_CENTER }
#endif
#if ENABLED(AUTO_BED_LEVELING_BILINEAR)
// Add a calibration procedure in the Probe Offsets menu
// to compensate for twist in the X-axis.
//#define X_AXIS_TWIST_COMPENSATION
#if ENABLED(X_AXIS_TWIST_COMPENSATION)
/**
* Enable to init the Probe Z-Offset when starting the Wizard.
* Use a height slightly above the estimated nozzle-to-probe Z offset.
* For example, with an offset of -5, consider a starting height of -4.
*/
#define XATC_START_Z 0.0
#define XATC_MAX_POINTS 3 // Number of points to probe in the wizard
#define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe
#endif
#endif #endif
#endif #endif

56
config/examples/Azteeg/X5GT/Configuration_adv.h
View file

@ -1280,37 +1280,35 @@
#define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440
#endif #endif
#if HAS_BED_PROBE && EITHER(HAS_MARLINUI_MENU, HAS_TFT_LVGL_UI)
//#define PROBE_OFFSET_WIZARD // Add a Probe Z Offset calibration option to the LCD menu
#if ENABLED(PROBE_OFFSET_WIZARD)
/**
* Enable to init the Probe Z-Offset when starting the Wizard.
* Use a height slightly above the estimated nozzle-to-probe Z offset.
* For example, with an offset of -5, consider a starting height of -4.
*/
//#define PROBE_OFFSET_WIZARD_START_Z -4.0
// Set a convenient position to do the calibration (probing point and nozzle/bed-distance)
//#define PROBE_OFFSET_WIZARD_XY_POS { X_CENTER, Y_CENTER }
#endif
#endif
#if HAS_MARLINUI_MENU #if HAS_MARLINUI_MENU
// Add Probe Z Offset calibration to the Z Probe Offsets menu #if BOTH(HAS_BED_PROBE, AUTO_BED_LEVELING_BILINEAR)
#if HAS_BED_PROBE // Add calibration in the Probe Offsets menu to compensate for X-axis twist.
//#define PROBE_OFFSET_WIZARD //#define X_AXIS_TWIST_COMPENSATION
#if ENABLED(PROBE_OFFSET_WIZARD) #if ENABLED(X_AXIS_TWIST_COMPENSATION)
// /**
// Enable to init the Probe Z-Offset when starting the Wizard. * Enable to init the Probe Z-Offset when starting the Wizard.
// Use a height slightly above the estimated nozzle-to-probe Z offset. * Use a height slightly above the estimated nozzle-to-probe Z offset.
// For example, with an offset of -5, consider a starting height of -4. * For example, with an offset of -5, consider a starting height of -4.
// */
//#define PROBE_OFFSET_WIZARD_START_Z -4.0 #define XATC_START_Z 0.0
#define XATC_MAX_POINTS 3 // Number of points to probe in the wizard
// Set a convenient position to do the calibration (probing point and nozzle/bed-distance) #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe
//#define PROBE_OFFSET_WIZARD_XY_POS { X_CENTER, Y_CENTER }
#endif
#if ENABLED(AUTO_BED_LEVELING_BILINEAR)
// Add a calibration procedure in the Probe Offsets menu
// to compensate for twist in the X-axis.
//#define X_AXIS_TWIST_COMPENSATION
#if ENABLED(X_AXIS_TWIST_COMPENSATION)
/**
* Enable to init the Probe Z-Offset when starting the Wizard.
* Use a height slightly above the estimated nozzle-to-probe Z offset.
* For example, with an offset of -5, consider a starting height of -4.
*/
#define XATC_START_Z 0.0
#define XATC_MAX_POINTS 3 // Number of points to probe in the wizard
#define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe
#endif
#endif #endif
#endif #endif

56
config/examples/BIBO/TouchX/cyclops/Configuration_adv.h
View file

@ -1280,37 +1280,35 @@
#define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440
#endif #endif
#if HAS_BED_PROBE && EITHER(HAS_MARLINUI_MENU, HAS_TFT_LVGL_UI)
//#define PROBE_OFFSET_WIZARD // Add a Probe Z Offset calibration option to the LCD menu
#if ENABLED(PROBE_OFFSET_WIZARD)
/**
* Enable to init the Probe Z-Offset when starting the Wizard.
* Use a height slightly above the estimated nozzle-to-probe Z offset.
* For example, with an offset of -5, consider a starting height of -4.
*/
//#define PROBE_OFFSET_WIZARD_START_Z -4.0
// Set a convenient position to do the calibration (probing point and nozzle/bed-distance)
//#define PROBE_OFFSET_WIZARD_XY_POS { X_CENTER, Y_CENTER }
#endif
#endif
#if HAS_MARLINUI_MENU #if HAS_MARLINUI_MENU
// Add Probe Z Offset calibration to the Z Probe Offsets menu #if BOTH(HAS_BED_PROBE, AUTO_BED_LEVELING_BILINEAR)
#if HAS_BED_PROBE // Add calibration in the Probe Offsets menu to compensate for X-axis twist.
//#define PROBE_OFFSET_WIZARD //#define X_AXIS_TWIST_COMPENSATION
#if ENABLED(PROBE_OFFSET_WIZARD) #if ENABLED(X_AXIS_TWIST_COMPENSATION)
// /**
// Enable to init the Probe Z-Offset when starting the Wizard. * Enable to init the Probe Z-Offset when starting the Wizard.
// Use a height slightly above the estimated nozzle-to-probe Z offset. * Use a height slightly above the estimated nozzle-to-probe Z offset.
// For example, with an offset of -5, consider a starting height of -4. * For example, with an offset of -5, consider a starting height of -4.
// */
//#define PROBE_OFFSET_WIZARD_START_Z -4.0 #define XATC_START_Z 0.0
#define XATC_MAX_POINTS 3 // Number of points to probe in the wizard
// Set a convenient position to do the calibration (probing point and nozzle/bed-distance) #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe
//#define PROBE_OFFSET_WIZARD_XY_POS { X_CENTER, Y_CENTER }
#endif
#if ENABLED(AUTO_BED_LEVELING_BILINEAR)
// Add a calibration procedure in the Probe Offsets menu
// to compensate for twist in the X-axis.
//#define X_AXIS_TWIST_COMPENSATION
#if ENABLED(X_AXIS_TWIST_COMPENSATION)
/**
* Enable to init the Probe Z-Offset when starting the Wizard.
* Use a height slightly above the estimated nozzle-to-probe Z offset.
* For example, with an offset of -5, consider a starting height of -4.
*/
#define XATC_START_Z 0.0
#define XATC_MAX_POINTS 3 // Number of points to probe in the wizard
#define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe
#endif
#endif #endif
#endif #endif

56
config/examples/BIBO/TouchX/default/Configuration_adv.h
View file

@ -1273,37 +1273,35 @@
#define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440
#endif #endif
#if HAS_BED_PROBE && EITHER(HAS_MARLINUI_MENU, HAS_TFT_LVGL_UI)
//#define PROBE_OFFSET_WIZARD // Add a Probe Z Offset calibration option to the LCD menu
#if ENABLED(PROBE_OFFSET_WIZARD)
/**
* Enable to init the Probe Z-Offset when starting the Wizard.
* Use a height slightly above the estimated nozzle-to-probe Z offset.
* For example, with an offset of -5, consider a starting height of -4.
*/
//#define PROBE_OFFSET_WIZARD_START_Z -4.0
// Set a convenient position to do the calibration (probing point and nozzle/bed-distance)
//#define PROBE_OFFSET_WIZARD_XY_POS { X_CENTER, Y_CENTER }
#endif
#endif
#if HAS_MARLINUI_MENU #if HAS_MARLINUI_MENU
// Add Probe Z Offset calibration to the Z Probe Offsets menu #if BOTH(HAS_BED_PROBE, AUTO_BED_LEVELING_BILINEAR)
#if HAS_BED_PROBE // Add calibration in the Probe Offsets menu to compensate for X-axis twist.
//#define PROBE_OFFSET_WIZARD //#define X_AXIS_TWIST_COMPENSATION
#if ENABLED(PROBE_OFFSET_WIZARD) #if ENABLED(X_AXIS_TWIST_COMPENSATION)
// /**
// Enable to init the Probe Z-Offset when starting the Wizard. * Enable to init the Probe Z-Offset when starting the Wizard.
// Use a height slightly above the estimated nozzle-to-probe Z offset. * Use a height slightly above the estimated nozzle-to-probe Z offset.
// For example, with an offset of -5, consider a starting height of -4. * For example, with an offset of -5, consider a starting height of -4.
// */
//#define PROBE_OFFSET_WIZARD_START_Z -4.0 #define XATC_START_Z 0.0
#define XATC_MAX_POINTS 3 // Number of points to probe in the wizard
// Set a convenient position to do the calibration (probing point and nozzle/bed-distance) #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe
//#define PROBE_OFFSET_WIZARD_XY_POS { X_CENTER, Y_CENTER }
#endif
#if ENABLED(AUTO_BED_LEVELING_BILINEAR)
// Add a calibration procedure in the Probe Offsets menu
// to compensate for twist in the X-axis.
//#define X_AXIS_TWIST_COMPENSATION
#if ENABLED(X_AXIS_TWIST_COMPENSATION)
/**
* Enable to init the Probe Z-Offset when starting the Wizard.
* Use a height slightly above the estimated nozzle-to-probe Z offset.
* For example, with an offset of -5, consider a starting height of -4.
*/
#define XATC_START_Z 0.0
#define XATC_MAX_POINTS 3 // Number of points to probe in the wizard
#define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe
#endif
#endif #endif
#endif #endif

56
config/examples/BIQU/B1 - SKR 1.4/Configuration_adv.h
View file

@ -1280,37 +1280,35 @@
#define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440
#endif #endif
#if HAS_BED_PROBE && EITHER(HAS_MARLINUI_MENU, HAS_TFT_LVGL_UI)
//#define PROBE_OFFSET_WIZARD // Add a Probe Z Offset calibration option to the LCD menu
#if ENABLED(PROBE_OFFSET_WIZARD)
/**
* Enable to init the Probe Z-Offset when starting the Wizard.
* Use a height slightly above the estimated nozzle-to-probe Z offset.
* For example, with an offset of -5, consider a starting height of -4.
*/
//#define PROBE_OFFSET_WIZARD_START_Z -4.0
// Set a convenient position to do the calibration (probing point and nozzle/bed-distance)
//#define PROBE_OFFSET_WIZARD_XY_POS { X_CENTER, Y_CENTER }
#endif
#endif
#if HAS_MARLINUI_MENU #if HAS_MARLINUI_MENU
// Add Probe Z Offset calibration to the Z Probe Offsets menu #if BOTH(HAS_BED_PROBE, AUTO_BED_LEVELING_BILINEAR)
#if HAS_BED_PROBE // Add calibration in the Probe Offsets menu to compensate for X-axis twist.
//#define PROBE_OFFSET_WIZARD //#define X_AXIS_TWIST_COMPENSATION
#if ENABLED(PROBE_OFFSET_WIZARD) #if ENABLED(X_AXIS_TWIST_COMPENSATION)
// /**
// Enable to init the Probe Z-Offset when starting the Wizard. * Enable to init the Probe Z-Offset when starting the Wizard.
// Use a height slightly above the estimated nozzle-to-probe Z offset. * Use a height slightly above the estimated nozzle-to-probe Z offset.
// For example, with an offset of -5, consider a starting height of -4. * For example, with an offset of -5, consider a starting height of -4.
// */
//#define PROBE_OFFSET_WIZARD_START_Z -4.0 #define XATC_START_Z 0.0
#define XATC_MAX_POINTS 3 // Number of points to probe in the wizard
// Set a convenient position to do the calibration (probing point and nozzle/bed-distance) #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe
//#define PROBE_OFFSET_WIZARD_XY_POS { X_CENTER, Y_CENTER }
#endif
#if ENABLED(AUTO_BED_LEVELING_BILINEAR)
// Add a calibration procedure in the Probe Offsets menu
// to compensate for twist in the X-axis.
//#define X_AXIS_TWIST_COMPENSATION
#if ENABLED(X_AXIS_TWIST_COMPENSATION)
/**
* Enable to init the Probe Z-Offset when starting the Wizard.
* Use a height slightly above the estimated nozzle-to-probe Z offset.
* For example, with an offset of -5, consider a starting height of -4.
*/
#define XATC_START_Z 0.0
#define XATC_MAX_POINTS 3 // Number of points to probe in the wizard
#define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe
#endif
#endif #endif
#endif #endif

56
config/examples/BIQU/B1 - SKR 2/Configuration_adv.h
View file

@ -1280,37 +1280,35 @@
#define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440
#endif #endif
#if HAS_BED_PROBE && EITHER(HAS_MARLINUI_MENU, HAS_TFT_LVGL_UI)
#define PROBE_OFFSET_WIZARD // Add a Probe Z Offset calibration option to the LCD menu
#if ENABLED(PROBE_OFFSET_WIZARD)
/**
* Enable to init the Probe Z-Offset when starting the Wizard.
* Use a height slightly above the estimated nozzle-to-probe Z offset.
* For example, with an offset of -5, consider a starting height of -4.
*/
//#define PROBE_OFFSET_WIZARD_START_Z -4.0
// Set a convenient position to do the calibration (probing point and nozzle/bed-distance)
#define PROBE_OFFSET_WIZARD_XY_POS { X_CENTER, Y_CENTER }
#endif
#endif
#if HAS_MARLINUI_MENU #if HAS_MARLINUI_MENU
// Add Probe Z Offset calibration to the Z Probe Offsets menu #if BOTH(HAS_BED_PROBE, AUTO_BED_LEVELING_BILINEAR)
#if HAS_BED_PROBE // Add calibration in the Probe Offsets menu to compensate for X-axis twist.
#define PROBE_OFFSET_WIZARD //#define X_AXIS_TWIST_COMPENSATION
#if ENABLED(PROBE_OFFSET_WIZARD) #if ENABLED(X_AXIS_TWIST_COMPENSATION)
// /**
// Enable to init the Probe Z-Offset when starting the Wizard. * Enable to init the Probe Z-Offset when starting the Wizard.
// Use a height slightly above the estimated nozzle-to-probe Z offset. * Use a height slightly above the estimated nozzle-to-probe Z offset.
// For example, with an offset of -5, consider a starting height of -4. * For example, with an offset of -5, consider a starting height of -4.
// */
//#define PROBE_OFFSET_WIZARD_START_Z -4.0 #define XATC_START_Z 0.0
#define XATC_MAX_POINTS 3 // Number of points to probe in the wizard
// Set a convenient position to do the calibration (probing point and nozzle/bed-distance) #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe
#define PROBE_OFFSET_WIZARD_XY_POS { X_CENTER, Y_CENTER }
#endif
#if ENABLED(AUTO_BED_LEVELING_BILINEAR)
// Add a calibration procedure in the Probe Offsets menu
// to compensate for twist in the X-axis.
//#define X_AXIS_TWIST_COMPENSATION
#if ENABLED(X_AXIS_TWIST_COMPENSATION)
/**
* Enable to init the Probe Z-Offset when starting the Wizard.
* Use a height slightly above the estimated nozzle-to-probe Z offset.
* For example, with an offset of -5, consider a starting height of -4.
*/
#define XATC_START_Z 0.0
#define XATC_MAX_POINTS 3 // Number of points to probe in the wizard
#define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe
#endif
#endif #endif
#endif #endif

56
config/examples/BIQU/B1 SE Plus/Configuration_adv.h
View file

@ -1280,37 +1280,35 @@
#define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440
#endif #endif
#if HAS_BED_PROBE && EITHER(HAS_MARLINUI_MENU, HAS_TFT_LVGL_UI)
//#define PROBE_OFFSET_WIZARD // Add a Probe Z Offset calibration option to the LCD menu
#if ENABLED(PROBE_OFFSET_WIZARD)
/**
* Enable to init the Probe Z-Offset when starting the Wizard.
* Use a height slightly above the estimated nozzle-to-probe Z offset.
* For example, with an offset of -5, consider a starting height of -4.
*/
//#define PROBE_OFFSET_WIZARD_START_Z -4.0
// Set a convenient position to do the calibration (probing point and nozzle/bed-distance)
//#define PROBE_OFFSET_WIZARD_XY_POS { X_CENTER, Y_CENTER }
#endif
#endif
#if HAS_MARLINUI_MENU #if HAS_MARLINUI_MENU
// Add Probe Z Offset calibration to the Z Probe Offsets menu #if BOTH(HAS_BED_PROBE, AUTO_BED_LEVELING_BILINEAR)
#if HAS_BED_PROBE // Add calibration in the Probe Offsets menu to compensate for X-axis twist.
//#define PROBE_OFFSET_WIZARD //#define X_AXIS_TWIST_COMPENSATION
#if ENABLED(PROBE_OFFSET_WIZARD) #if ENABLED(X_AXIS_TWIST_COMPENSATION)
// /**
// Enable to init the Probe Z-Offset when starting the Wizard. * Enable to init the Probe Z-Offset when starting the Wizard.
// Use a height slightly above the estimated nozzle-to-probe Z offset. * Use a height slightly above the estimated nozzle-to-probe Z offset.
// For example, with an offset of -5, consider a starting height of -4. * For example, with an offset of -5, consider a starting height of -4.
// */
//#define PROBE_OFFSET_WIZARD_START_Z -4.0 #define XATC_START_Z 0.0
#define XATC_MAX_POINTS 3 // Number of points to probe in the wizard
// Set a convenient position to do the calibration (probing point and nozzle/bed-distance) #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe
//#define PROBE_OFFSET_WIZARD_XY_POS { X_CENTER, Y_CENTER }
#endif
#if ENABLED(AUTO_BED_LEVELING_BILINEAR)
// Add a calibration procedure in the Probe Offsets menu
// to compensate for twist in the X-axis.
//#define X_AXIS_TWIST_COMPENSATION
#if ENABLED(X_AXIS_TWIST_COMPENSATION)
/**
* Enable to init the Probe Z-Offset when starting the Wizard.
* Use a height slightly above the estimated nozzle-to-probe Z offset.
* For example, with an offset of -5, consider a starting height of -4.
*/
#define XATC_START_Z 0.0
#define XATC_MAX_POINTS 3 // Number of points to probe in the wizard
#define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe
#endif
#endif #endif
#endif #endif

56
config/examples/BIQU/BX/Configuration_adv.h
View file

@ -1280,37 +1280,35 @@
#define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440
#endif #endif
#if HAS_BED_PROBE && EITHER(HAS_MARLINUI_MENU, HAS_TFT_LVGL_UI)
//#define PROBE_OFFSET_WIZARD // Add a Probe Z Offset calibration option to the LCD menu
#if ENABLED(PROBE_OFFSET_WIZARD)
/**
* Enable to init the Probe Z-Offset when starting the Wizard.
* Use a height slightly above the estimated nozzle-to-probe Z offset.
* For example, with an offset of -5, consider a starting height of -4.
*/
//#define PROBE_OFFSET_WIZARD_START_Z -4.0
// Set a convenient position to do the calibration (probing point and nozzle/bed-distance)
//#define PROBE_OFFSET_WIZARD_XY_POS { X_CENTER, Y_CENTER }
#endif
#endif
#if HAS_MARLINUI_MENU #if HAS_MARLINUI_MENU
// Add Probe Z Offset calibration to the Z Probe Offsets menu #if BOTH(HAS_BED_PROBE, AUTO_BED_LEVELING_BILINEAR)
#if HAS_BED_PROBE // Add calibration in the Probe Offsets menu to compensate for X-axis twist.
//#define PROBE_OFFSET_WIZARD //#define X_AXIS_TWIST_COMPENSATION
#if ENABLED(PROBE_OFFSET_WIZARD) #if ENABLED(X_AXIS_TWIST_COMPENSATION)
// /**
// Enable to init the Probe Z-Offset when starting the Wizard. * Enable to init the Probe Z-Offset when starting the Wizard.
// Use a height slightly above the estimated nozzle-to-probe Z offset. * Use a height slightly above the estimated nozzle-to-probe Z offset.
// For example, with an offset of -5, consider a starting height of -4. * For example, with an offset of -5, consider a starting height of -4.
// */
//#define PROBE_OFFSET_WIZARD_START_Z -4.0 #define XATC_START_Z 0.0
#define XATC_MAX_POINTS 3 // Number of points to probe in the wizard
// Set a convenient position to do the calibration (probing point and nozzle/bed-distance) #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe
//#define PROBE_OFFSET_WIZARD_XY_POS { X_CENTER, Y_CENTER }
#endif
#if ENABLED(AUTO_BED_LEVELING_BILINEAR)
// Add a calibration procedure in the Probe Offsets menu
// to compensate for twist in the X-axis.
//#define X_AXIS_TWIST_COMPENSATION
#if ENABLED(X_AXIS_TWIST_COMPENSATION)
/**
* Enable to init the Probe Z-Offset when starting the Wizard.
* Use a height slightly above the estimated nozzle-to-probe Z offset.
* For example, with an offset of -5, consider a starting height of -4.
*/
#define XATC_START_Z 0.0
#define XATC_MAX_POINTS 3 // Number of points to probe in the wizard
#define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe
#endif
#endif #endif
#endif #endif

56
config/examples/BQ/Hephestos/Configuration_adv.h
View file

@ -1280,37 +1280,35 @@
#define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440
#endif #endif
#if HAS_BED_PROBE && EITHER(HAS_MARLINUI_MENU, HAS_TFT_LVGL_UI)
//#define PROBE_OFFSET_WIZARD // Add a Probe Z Offset calibration option to the LCD menu
#if ENABLED(PROBE_OFFSET_WIZARD)
/**
* Enable to init the Probe Z-Offset when starting the Wizard.
* Use a height slightly above the estimated nozzle-to-probe Z offset.
* For example, with an offset of -5, consider a starting height of -4.
*/
//#define PROBE_OFFSET_WIZARD_START_Z -4.0
// Set a convenient position to do the calibration (probing point and nozzle/bed-distance)
//#define PROBE_OFFSET_WIZARD_XY_POS { X_CENTER, Y_CENTER }
#endif
#endif
#if HAS_MARLINUI_MENU #if HAS_MARLINUI_MENU
// Add Probe Z Offset calibration to the Z Probe Offsets menu #if BOTH(HAS_BED_PROBE, AUTO_BED_LEVELING_BILINEAR)
#if HAS_BED_PROBE // Add calibration in the Probe Offsets menu to compensate for X-axis twist.
//#define PROBE_OFFSET_WIZARD //#define X_AXIS_TWIST_COMPENSATION
#if ENABLED(PROBE_OFFSET_WIZARD) #if ENABLED(X_AXIS_TWIST_COMPENSATION)
// /**
// Enable to init the Probe Z-Offset when starting the Wizard. * Enable to init the Probe Z-Offset when starting the Wizard.
// Use a height slightly above the estimated nozzle-to-probe Z offset. * Use a height slightly above the estimated nozzle-to-probe Z offset.
// For example, with an offset of -5, consider a starting height of -4. * For example, with an offset of -5, consider a starting height of -4.
// */
//#define PROBE_OFFSET_WIZARD_START_Z -4.0 #define XATC_START_Z 0.0
#define XATC_MAX_POINTS 3 // Number of points to probe in the wizard
// Set a convenient position to do the calibration (probing point and nozzle/bed-distance) #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe
//#define PROBE_OFFSET_WIZARD_XY_POS { X_CENTER, Y_CENTER }
#endif
#if ENABLED(AUTO_BED_LEVELING_BILINEAR)
// Add a calibration procedure in the Probe Offsets menu
// to compensate for twist in the X-axis.
//#define X_AXIS_TWIST_COMPENSATION
#if ENABLED(X_AXIS_TWIST_COMPENSATION)
/**
* Enable to init the Probe Z-Offset when starting the Wizard.
* Use a height slightly above the estimated nozzle-to-probe Z offset.
* For example, with an offset of -5, consider a starting height of -4.
*/
#define XATC_START_Z 0.0
#define XATC_MAX_POINTS 3 // Number of points to probe in the wizard
#define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe
#endif
#endif #endif
#endif #endif

56
config/examples/BQ/Hephestos_2/Configuration_adv.h
View file

@ -1288,37 +1288,35 @@
#define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440
#endif #endif
#if HAS_BED_PROBE && EITHER(HAS_MARLINUI_MENU, HAS_TFT_LVGL_UI)
//#define PROBE_OFFSET_WIZARD // Add a Probe Z Offset calibration option to the LCD menu
#if ENABLED(PROBE_OFFSET_WIZARD)
/**
* Enable to init the Probe Z-Offset when starting the Wizard.
* Use a height slightly above the estimated nozzle-to-probe Z offset.
* For example, with an offset of -5, consider a starting height of -4.
*/
//#define PROBE_OFFSET_WIZARD_START_Z -4.0
// Set a convenient position to do the calibration (probing point and nozzle/bed-distance)
//#define PROBE_OFFSET_WIZARD_XY_POS { X_CENTER, Y_CENTER }
#endif
#endif
#if HAS_MARLINUI_MENU #if HAS_MARLINUI_MENU
// Add Probe Z Offset calibration to the Z Probe Offsets menu #if BOTH(HAS_BED_PROBE, AUTO_BED_LEVELING_BILINEAR)
#if HAS_BED_PROBE // Add calibration in the Probe Offsets menu to compensate for X-axis twist.
//#define PROBE_OFFSET_WIZARD //#define X_AXIS_TWIST_COMPENSATION
#if ENABLED(PROBE_OFFSET_WIZARD) #if ENABLED(X_AXIS_TWIST_COMPENSATION)
// /**
// Enable to init the Probe Z-Offset when starting the Wizard. * Enable to init the Probe Z-Offset when starting the Wizard.
// Use a height slightly above the estimated nozzle-to-probe Z offset. * Use a height slightly above the estimated nozzle-to-probe Z offset.
// For example, with an offset of -5, consider a starting height of -4. * For example, with an offset of -5, consider a starting height of -4.
// */
//#define PROBE_OFFSET_WIZARD_START_Z -4.0 #define XATC_START_Z 0.0
#define XATC_MAX_POINTS 3 // Number of points to probe in the wizard
// Set a convenient position to do the calibration (probing point and nozzle/bed-distance) #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe
//#define PROBE_OFFSET_WIZARD_XY_POS { X_CENTER, Y_CENTER }
#endif
#if ENABLED(AUTO_BED_LEVELING_BILINEAR)
// Add a calibration procedure in the Probe Offsets menu
// to compensate for twist in the X-axis.
//#define X_AXIS_TWIST_COMPENSATION
#if ENABLED(X_AXIS_TWIST_COMPENSATION)
/**
* Enable to init the Probe Z-Offset when starting the Wizard.
* Use a height slightly above the estimated nozzle-to-probe Z offset.
* For example, with an offset of -5, consider a starting height of -4.
*/
#define XATC_START_Z 0.0
#define XATC_MAX_POINTS 3 // Number of points to probe in the wizard
#define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe
#endif
#endif #endif
#endif #endif

56
config/examples/BQ/WITBOX/Configuration_adv.h
View file

@ -1280,37 +1280,35 @@
#define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440
#endif #endif
#if HAS_BED_PROBE && EITHER(HAS_MARLINUI_MENU, HAS_TFT_LVGL_UI)
//#define PROBE_OFFSET_WIZARD // Add a Probe Z Offset calibration option to the LCD menu
#if ENABLED(PROBE_OFFSET_WIZARD)
/**
* Enable to init the Probe Z-Offset when starting the Wizard.
* Use a height slightly above the estimated nozzle-to-probe Z offset.
* For example, with an offset of -5, consider a starting height of -4.
*/
//#define PROBE_OFFSET_WIZARD_START_Z -4.0
// Set a convenient position to do the calibration (probing point and nozzle/bed-distance)
//#define PROBE_OFFSET_WIZARD_XY_POS { X_CENTER, Y_CENTER }
#endif
#endif
#if HAS_MARLINUI_MENU #if HAS_MARLINUI_MENU
// Add Probe Z Offset calibration to the Z Probe Offsets menu #if BOTH(HAS_BED_PROBE, AUTO_BED_LEVELING_BILINEAR)
#if HAS_BED_PROBE // Add calibration in the Probe Offsets menu to compensate for X-axis twist.
//#define PROBE_OFFSET_WIZARD //#define X_AXIS_TWIST_COMPENSATION
#if ENABLED(PROBE_OFFSET_WIZARD) #if ENABLED(X_AXIS_TWIST_COMPENSATION)
// /**
// Enable to init the Probe Z-Offset when starting the Wizard. * Enable to init the Probe Z-Offset when starting the Wizard.
// Use a height slightly above the estimated nozzle-to-probe Z offset. * Use a height slightly above the estimated nozzle-to-probe Z offset.
// For example, with an offset of -5, consider a starting height of -4. * For example, with an offset of -5, consider a starting height of -4.
// */
//#define PROBE_OFFSET_WIZARD_START_Z -4.0 #define XATC_START_Z 0.0
#define XATC_MAX_POINTS 3 // Number of points to probe in the wizard
// Set a convenient position to do the calibration (probing point and nozzle/bed-distance) #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe
//#define PROBE_OFFSET_WIZARD_XY_POS { X_CENTER, Y_CENTER }
#endif
#if ENABLED(AUTO_BED_LEVELING_BILINEAR)
// Add a calibration procedure in the Probe Offsets menu
// to compensate for twist in the X-axis.
//#define X_AXIS_TWIST_COMPENSATION
#if ENABLED(X_AXIS_TWIST_COMPENSATION)
/**
* Enable to init the Probe Z-Offset when starting the Wizard.
* Use a height slightly above the estimated nozzle-to-probe Z offset.
* For example, with an offset of -5, consider a starting height of -4.
*/
#define XATC_START_Z 0.0
#define XATC_MAX_POINTS 3 // Number of points to probe in the wizard
#define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe
#endif
#endif #endif
#endif #endif

56
config/examples/CTC/A13/Configuration_adv.h
View file

@ -1280,37 +1280,35 @@
#define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440
#endif #endif
#if HAS_BED_PROBE && EITHER(HAS_MARLINUI_MENU, HAS_TFT_LVGL_UI)
//#define PROBE_OFFSET_WIZARD // Add a Probe Z Offset calibration option to the LCD menu
#if ENABLED(PROBE_OFFSET_WIZARD)
/**
* Enable to init the Probe Z-Offset when starting the Wizard.
* Use a height slightly above the estimated nozzle-to-probe Z offset.
* For example, with an offset of -5, consider a starting height of -4.
*/
//#define PROBE_OFFSET_WIZARD_START_Z -4.0
// Set a convenient position to do the calibration (probing point and nozzle/bed-distance)
//#define PROBE_OFFSET_WIZARD_XY_POS { X_CENTER, Y_CENTER }
#endif
#endif
#if HAS_MARLINUI_MENU #if HAS_MARLINUI_MENU
// Add Probe Z Offset calibration to the Z Probe Offsets menu #if BOTH(HAS_BED_PROBE, AUTO_BED_LEVELING_BILINEAR)
#if HAS_BED_PROBE // Add calibration in the Probe Offsets menu to compensate for X-axis twist.
//#define PROBE_OFFSET_WIZARD //#define X_AXIS_TWIST_COMPENSATION
#if ENABLED(PROBE_OFFSET_WIZARD) #if ENABLED(X_AXIS_TWIST_COMPENSATION)
// /**
// Enable to init the Probe Z-Offset when starting the Wizard. * Enable to init the Probe Z-Offset when starting the Wizard.
// Use a height slightly above the estimated nozzle-to-probe Z offset. * Use a height slightly above the estimated nozzle-to-probe Z offset.
// For example, with an offset of -5, consider a starting height of -4. * For example, with an offset of -5, consider a starting height of -4.
// */
//#define PROBE_OFFSET_WIZARD_START_Z -4.0 #define XATC_START_Z 0.0
#define XATC_MAX_POINTS 3 // Number of points to probe in the wizard
// Set a convenient position to do the calibration (probing point and nozzle/bed-distance) #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe
//#define PROBE_OFFSET_WIZARD_XY_POS { X_CENTER, Y_CENTER }
#endif
#if ENABLED(AUTO_BED_LEVELING_BILINEAR)
// Add a calibration procedure in the Probe Offsets menu
// to compensate for twist in the X-axis.
//#define X_AXIS_TWIST_COMPENSATION
#if ENABLED(X_AXIS_TWIST_COMPENSATION)
/**
* Enable to init the Probe Z-Offset when starting the Wizard.
* Use a height slightly above the estimated nozzle-to-probe Z offset.
* For example, with an offset of -5, consider a starting height of -4.
*/
#define XATC_START_Z 0.0
#define XATC_MAX_POINTS 3 // Number of points to probe in the wizard
#define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe
#endif
#endif #endif
#endif #endif

56
config/examples/Cartesio/Configuration_adv.h
View file

@ -1280,37 +1280,35 @@
#define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440
#endif #endif
#if HAS_BED_PROBE && EITHER(HAS_MARLINUI_MENU, HAS_TFT_LVGL_UI)
//#define PROBE_OFFSET_WIZARD // Add a Probe Z Offset calibration option to the LCD menu
#if ENABLED(PROBE_OFFSET_WIZARD)
/**
* Enable to init the Probe Z-Offset when starting the Wizard.
* Use a height slightly above the estimated nozzle-to-probe Z offset.
* For example, with an offset of -5, consider a starting height of -4.
*/
//#define PROBE_OFFSET_WIZARD_START_Z -4.0
// Set a convenient position to do the calibration (probing point and nozzle/bed-distance)
//#define PROBE_OFFSET_WIZARD_XY_POS { X_CENTER, Y_CENTER }
#endif
#endif
#if HAS_MARLINUI_MENU #if HAS_MARLINUI_MENU
// Add Probe Z Offset calibration to the Z Probe Offsets menu #if BOTH(HAS_BED_PROBE, AUTO_BED_LEVELING_BILINEAR)
#if HAS_BED_PROBE // Add calibration in the Probe Offsets menu to compensate for X-axis twist.
//#define PROBE_OFFSET_WIZARD //#define X_AXIS_TWIST_COMPENSATION
#if ENABLED(PROBE_OFFSET_WIZARD) #if ENABLED(X_AXIS_TWIST_COMPENSATION)
// /**
// Enable to init the Probe Z-Offset when starting the Wizard. * Enable to init the Probe Z-Offset when starting the Wizard.
// Use a height slightly above the estimated nozzle-to-probe Z offset. * Use a height slightly above the estimated nozzle-to-probe Z offset.
// For example, with an offset of -5, consider a starting height of -4. * For example, with an offset of -5, consider a starting height of -4.
// */
//#define PROBE_OFFSET_WIZARD_START_Z -4.0 #define XATC_START_Z 0.0
#define XATC_MAX_POINTS 3 // Number of points to probe in the wizard
// Set a convenient position to do the calibration (probing point and nozzle/bed-distance) #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe
//#define PROBE_OFFSET_WIZARD_XY_POS { X_CENTER, Y_CENTER }
#endif
#if ENABLED(AUTO_BED_LEVELING_BILINEAR)
// Add a calibration procedure in the Probe Offsets menu
// to compensate for twist in the X-axis.
//#define X_AXIS_TWIST_COMPENSATION
#if ENABLED(X_AXIS_TWIST_COMPENSATION)
/**
* Enable to init the Probe Z-Offset when starting the Wizard.
* Use a height slightly above the estimated nozzle-to-probe Z offset.
* For example, with an offset of -5, consider a starting height of -4.
*/
#define XATC_START_Z 0.0
#define XATC_MAX_POINTS 3 // Number of points to probe in the wizard
#define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe
#endif
#endif #endif
#endif #endif

56
config/examples/Creality/CR-10 Mini/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h
View file

@ -1280,37 +1280,35 @@
#define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440
#endif #endif
#if HAS_BED_PROBE && EITHER(HAS_MARLINUI_MENU, HAS_TFT_LVGL_UI)
//#define PROBE_OFFSET_WIZARD // Add a Probe Z Offset calibration option to the LCD menu
#if ENABLED(PROBE_OFFSET_WIZARD)
/**
* Enable to init the Probe Z-Offset when starting the Wizard.
* Use a height slightly above the estimated nozzle-to-probe Z offset.
* For example, with an offset of -5, consider a starting height of -4.
*/
//#define PROBE_OFFSET_WIZARD_START_Z -4.0
// Set a convenient position to do the calibration (probing point and nozzle/bed-distance)
//#define PROBE_OFFSET_WIZARD_XY_POS { X_CENTER, Y_CENTER }
#endif
#endif
#if HAS_MARLINUI_MENU #if HAS_MARLINUI_MENU
// Add Probe Z Offset calibration to the Z Probe Offsets menu #if BOTH(HAS_BED_PROBE, AUTO_BED_LEVELING_BILINEAR)
#if HAS_BED_PROBE // Add calibration in the Probe Offsets menu to compensate for X-axis twist.
//#define PROBE_OFFSET_WIZARD //#define X_AXIS_TWIST_COMPENSATION
#if ENABLED(PROBE_OFFSET_WIZARD) #if ENABLED(X_AXIS_TWIST_COMPENSATION)
// /**
// Enable to init the Probe Z-Offset when starting the Wizard. * Enable to init the Probe Z-Offset when starting the Wizard.
// Use a height slightly above the estimated nozzle-to-probe Z offset. * Use a height slightly above the estimated nozzle-to-probe Z offset.
// For example, with an offset of -5, consider a starting height of -4. * For example, with an offset of -5, consider a starting height of -4.
// */
//#define PROBE_OFFSET_WIZARD_START_Z -4.0 #define XATC_START_Z 0.0
#define XATC_MAX_POINTS 3 // Number of points to probe in the wizard
// Set a convenient position to do the calibration (probing point and nozzle/bed-distance) #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe
//#define PROBE_OFFSET_WIZARD_XY_POS { X_CENTER, Y_CENTER }
#endif
#if ENABLED(AUTO_BED_LEVELING_BILINEAR)
// Add a calibration procedure in the Probe Offsets menu
// to compensate for twist in the X-axis.
//#define X_AXIS_TWIST_COMPENSATION
#if ENABLED(X_AXIS_TWIST_COMPENSATION)
/**
* Enable to init the Probe Z-Offset when starting the Wizard.
* Use a height slightly above the estimated nozzle-to-probe Z offset.
* For example, with an offset of -5, consider a starting height of -4.
*/
#define XATC_START_Z 0.0
#define XATC_MAX_POINTS 3 // Number of points to probe in the wizard
#define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe
#endif
#endif #endif
#endif #endif

56
config/examples/Creality/CR-10 Mini/CrealityV1/Configuration_adv.h
View file

@ -1280,37 +1280,35 @@
#define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440
#endif #endif
#if HAS_BED_PROBE && EITHER(HAS_MARLINUI_MENU, HAS_TFT_LVGL_UI)
//#define PROBE_OFFSET_WIZARD // Add a Probe Z Offset calibration option to the LCD menu
#if ENABLED(PROBE_OFFSET_WIZARD)
/**
* Enable to init the Probe Z-Offset when starting the Wizard.
* Use a height slightly above the estimated nozzle-to-probe Z offset.
* For example, with an offset of -5, consider a starting height of -4.
*/
//#define PROBE_OFFSET_WIZARD_START_Z -4.0
// Set a convenient position to do the calibration (probing point and nozzle/bed-distance)
//#define PROBE_OFFSET_WIZARD_XY_POS { X_CENTER, Y_CENTER }
#endif
#endif
#if HAS_MARLINUI_MENU #if HAS_MARLINUI_MENU
// Add Probe Z Offset calibration to the Z Probe Offsets menu #if BOTH(HAS_BED_PROBE, AUTO_BED_LEVELING_BILINEAR)
#if HAS_BED_PROBE // Add calibration in the Probe Offsets menu to compensate for X-axis twist.
//#define PROBE_OFFSET_WIZARD //#define X_AXIS_TWIST_COMPENSATION
#if ENABLED(PROBE_OFFSET_WIZARD) #if ENABLED(X_AXIS_TWIST_COMPENSATION)
// /**
// Enable to init the Probe Z-Offset when starting the Wizard. * Enable to init the Probe Z-Offset when starting the Wizard.
// Use a height slightly above the estimated nozzle-to-probe Z offset. * Use a height slightly above the estimated nozzle-to-probe Z offset.
// For example, with an offset of -5, consider a starting height of -4. * For example, with an offset of -5, consider a starting height of -4.
// */
//#define PROBE_OFFSET_WIZARD_START_Z -4.0 #define XATC_START_Z 0.0
#define XATC_MAX_POINTS 3 // Number of points to probe in the wizard
// Set a convenient position to do the calibration (probing point and nozzle/bed-distance) #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe
//#define PROBE_OFFSET_WIZARD_XY_POS { X_CENTER, Y_CENTER }
#endif
#if ENABLED(AUTO_BED_LEVELING_BILINEAR)
// Add a calibration procedure in the Probe Offsets menu
// to compensate for twist in the X-axis.
//#define X_AXIS_TWIST_COMPENSATION
#if ENABLED(X_AXIS_TWIST_COMPENSATION)
/**
* Enable to init the Probe Z-Offset when starting the Wizard.
* Use a height slightly above the estimated nozzle-to-probe Z offset.
* For example, with an offset of -5, consider a starting height of -4.
*/
#define XATC_START_Z 0.0
#define XATC_MAX_POINTS 3 // Number of points to probe in the wizard
#define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe
#endif
#endif #endif
#endif #endif

56
config/examples/Creality/CR-10 Mini/MEEB-3DP/Configuration_adv.h
View file

@ -1280,37 +1280,35 @@
#define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440
#endif #endif
#if HAS_BED_PROBE && EITHER(HAS_MARLINUI_MENU, HAS_TFT_LVGL_UI)
//#define PROBE_OFFSET_WIZARD // Add a Probe Z Offset calibration option to the LCD menu
#if ENABLED(PROBE_OFFSET_WIZARD)
/**
* Enable to init the Probe Z-Offset when starting the Wizard.
* Use a height slightly above the estimated nozzle-to-probe Z offset.
* For example, with an offset of -5, consider a starting height of -4.
*/
//#define PROBE_OFFSET_WIZARD_START_Z -4.0
// Set a convenient position to do the calibration (probing point and nozzle/bed-distance)
//#define PROBE_OFFSET_WIZARD_XY_POS { X_CENTER, Y_CENTER }
#endif
#endif
#if HAS_MARLINUI_MENU #if HAS_MARLINUI_MENU
// Add Probe Z Offset calibration to the Z Probe Offsets menu #if BOTH(HAS_BED_PROBE, AUTO_BED_LEVELING_BILINEAR)
#if HAS_BED_PROBE // Add calibration in the Probe Offsets menu to compensate for X-axis twist.
//#define PROBE_OFFSET_WIZARD //#define X_AXIS_TWIST_COMPENSATION
#if ENABLED(PROBE_OFFSET_WIZARD) #if ENABLED(X_AXIS_TWIST_COMPENSATION)
// /**
// Enable to init the Probe Z-Offset when starting the Wizard. * Enable to init the Probe Z-Offset when starting the Wizard.
// Use a height slightly above the estimated nozzle-to-probe Z offset. * Use a height slightly above the estimated nozzle-to-probe Z offset.
// For example, with an offset of -5, consider a starting height of -4. * For example, with an offset of -5, consider a starting height of -4.
// */
//#define PROBE_OFFSET_WIZARD_START_Z -4.0 #define XATC_START_Z 0.0
#define XATC_MAX_POINTS 3 // Number of points to probe in the wizard
// Set a convenient position to do the calibration (probing point and nozzle/bed-distance) #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe
//#define PROBE_OFFSET_WIZARD_XY_POS { X_CENTER, Y_CENTER }
#endif
#if ENABLED(AUTO_BED_LEVELING_BILINEAR)
// Add a calibration procedure in the Probe Offsets menu
// to compensate for twist in the X-axis.
//#define X_AXIS_TWIST_COMPENSATION
#if ENABLED(X_AXIS_TWIST_COMPENSATION)
/**
* Enable to init the Probe Z-Offset when starting the Wizard.
* Use a height slightly above the estimated nozzle-to-probe Z offset.
* For example, with an offset of -5, consider a starting height of -4.
*/
#define XATC_START_Z 0.0
#define XATC_MAX_POINTS 3 // Number of points to probe in the wizard
#define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe
#endif
#endif #endif
#endif #endif

56
config/examples/Creality/CR-10 S4/CrealityV1/Configuration_adv.h
View file

@ -1280,37 +1280,35 @@
#define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440
#endif #endif
#if HAS_BED_PROBE && EITHER(HAS_MARLINUI_MENU, HAS_TFT_LVGL_UI)
//#define PROBE_OFFSET_WIZARD // Add a Probe Z Offset calibration option to the LCD menu
#if ENABLED(PROBE_OFFSET_WIZARD)
/**
* Enable to init the Probe Z-Offset when starting the Wizard.
* Use a height slightly above the estimated nozzle-to-probe Z offset.
* For example, with an offset of -5, consider a starting height of -4.
*/
//#define PROBE_OFFSET_WIZARD_START_Z -4.0
// Set a convenient position to do the calibration (probing point and nozzle/bed-distance)
//#define PROBE_OFFSET_WIZARD_XY_POS { X_CENTER, Y_CENTER }
#endif
#endif
#if HAS_MARLINUI_MENU #if HAS_MARLINUI_MENU
// Add Probe Z Offset calibration to the Z Probe Offsets menu #if BOTH(HAS_BED_PROBE, AUTO_BED_LEVELING_BILINEAR)
#if HAS_BED_PROBE // Add calibration in the Probe Offsets menu to compensate for X-axis twist.
//#define PROBE_OFFSET_WIZARD //#define X_AXIS_TWIST_COMPENSATION
#if ENABLED(PROBE_OFFSET_WIZARD) #if ENABLED(X_AXIS_TWIST_COMPENSATION)
// /**
// Enable to init the Probe Z-Offset when starting the Wizard. * Enable to init the Probe Z-Offset when starting the Wizard.
// Use a height slightly above the estimated nozzle-to-probe Z offset. * Use a height slightly above the estimated nozzle-to-probe Z offset.
// For example, with an offset of -5, consider a starting height of -4. * For example, with an offset of -5, consider a starting height of -4.
// */
//#define PROBE_OFFSET_WIZARD_START_Z -4.0 #define XATC_START_Z 0.0
#define XATC_MAX_POINTS 3 // Number of points to probe in the wizard
// Set a convenient position to do the calibration (probing point and nozzle/bed-distance) #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe
//#define PROBE_OFFSET_WIZARD_XY_POS { X_CENTER, Y_CENTER }
#endif
#if ENABLED(AUTO_BED_LEVELING_BILINEAR)
// Add a calibration procedure in the Probe Offsets menu
// to compensate for twist in the X-axis.
//#define X_AXIS_TWIST_COMPENSATION
#if ENABLED(X_AXIS_TWIST_COMPENSATION)
/**
* Enable to init the Probe Z-Offset when starting the Wizard.
* Use a height slightly above the estimated nozzle-to-probe Z offset.
* For example, with an offset of -5, consider a starting height of -4.
*/
#define XATC_START_Z 0.0
#define XATC_MAX_POINTS 3 // Number of points to probe in the wizard
#define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe
#endif
#endif #endif
#endif #endif

56
config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 1.2 with TFT35 E3 V3.0/Configuration_adv.h
View file

@ -1280,37 +1280,35 @@
#define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440
#endif #endif
#if HAS_BED_PROBE && EITHER(HAS_MARLINUI_MENU, HAS_TFT_LVGL_UI)
//#define PROBE_OFFSET_WIZARD // Add a Probe Z Offset calibration option to the LCD menu
#if ENABLED(PROBE_OFFSET_WIZARD)
/**
* Enable to init the Probe Z-Offset when starting the Wizard.
* Use a height slightly above the estimated nozzle-to-probe Z offset.
* For example, with an offset of -5, consider a starting height of -4.
*/
//#define PROBE_OFFSET_WIZARD_START_Z -4.0
// Set a convenient position to do the calibration (probing point and nozzle/bed-distance)
//#define PROBE_OFFSET_WIZARD_XY_POS { X_CENTER, Y_CENTER }
#endif
#endif
#if HAS_MARLINUI_MENU #if HAS_MARLINUI_MENU
// Add Probe Z Offset calibration to the Z Probe Offsets menu #if BOTH(HAS_BED_PROBE, AUTO_BED_LEVELING_BILINEAR)
#if HAS_BED_PROBE // Add calibration in the Probe Offsets menu to compensate for X-axis twist.
//#define PROBE_OFFSET_WIZARD //#define X_AXIS_TWIST_COMPENSATION
#if ENABLED(PROBE_OFFSET_WIZARD) #if ENABLED(X_AXIS_TWIST_COMPENSATION)
// /**
// Enable to init the Probe Z-Offset when starting the Wizard. * Enable to init the Probe Z-Offset when starting the Wizard.
// Use a height slightly above the estimated nozzle-to-probe Z offset. * Use a height slightly above the estimated nozzle-to-probe Z offset.
// For example, with an offset of -5, consider a starting height of -4. * For example, with an offset of -5, consider a starting height of -4.
// */
//#define PROBE_OFFSET_WIZARD_START_Z -4.0 #define XATC_START_Z 0.0
#define XATC_MAX_POINTS 3 // Number of points to probe in the wizard
// Set a convenient position to do the calibration (probing point and nozzle/bed-distance) #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe
//#define PROBE_OFFSET_WIZARD_XY_POS { X_CENTER, Y_CENTER }
#endif
#if ENABLED(AUTO_BED_LEVELING_BILINEAR)
// Add a calibration procedure in the Probe Offsets menu
// to compensate for twist in the X-axis.
//#define X_AXIS_TWIST_COMPENSATION
#if ENABLED(X_AXIS_TWIST_COMPENSATION)
/**
* Enable to init the Probe Z-Offset when starting the Wizard.
* Use a height slightly above the estimated nozzle-to-probe Z offset.
* For example, with an offset of -5, consider a starting height of -4.
*/
#define XATC_START_Z 0.0
#define XATC_MAX_POINTS 3 // Number of points to probe in the wizard
#define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe
#endif
#endif #endif
#endif #endif

56
config/examples/Creality/CR-10 S5/CrealityV1/Configuration_adv.h
View file

@ -1280,37 +1280,35 @@
#define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440
#endif #endif
#if HAS_BED_PROBE && EITHER(HAS_MARLINUI_MENU, HAS_TFT_LVGL_UI)
//#define PROBE_OFFSET_WIZARD // Add a Probe Z Offset calibration option to the LCD menu
#if ENABLED(PROBE_OFFSET_WIZARD)
/**
* Enable to init the Probe Z-Offset when starting the Wizard.
* Use a height slightly above the estimated nozzle-to-probe Z offset.
* For example, with an offset of -5, consider a starting height of -4.
*/
//#define PROBE_OFFSET_WIZARD_START_Z -4.0
// Set a convenient position to do the calibration (probing point and nozzle/bed-distance)
//#define PROBE_OFFSET_WIZARD_XY_POS { X_CENTER, Y_CENTER }
#endif
#endif
#if HAS_MARLINUI_MENU #if HAS_MARLINUI_MENU
// Add Probe Z Offset calibration to the Z Probe Offsets menu #if BOTH(HAS_BED_PROBE, AUTO_BED_LEVELING_BILINEAR)
#if HAS_BED_PROBE // Add calibration in the Probe Offsets menu to compensate for X-axis twist.
//#define PROBE_OFFSET_WIZARD //#define X_AXIS_TWIST_COMPENSATION
#if ENABLED(PROBE_OFFSET_WIZARD) #if ENABLED(X_AXIS_TWIST_COMPENSATION)
// /**
// Enable to init the Probe Z-Offset when starting the Wizard. * Enable to init the Probe Z-Offset when starting the Wizard.
// Use a height slightly above the estimated nozzle-to-probe Z offset. * Use a height slightly above the estimated nozzle-to-probe Z offset.
// For example, with an offset of -5, consider a starting height of -4. * For example, with an offset of -5, consider a starting height of -4.
// */
//#define PROBE_OFFSET_WIZARD_START_Z -4.0 #define XATC_START_Z 0.0
#define XATC_MAX_POINTS 3 // Number of points to probe in the wizard
// Set a convenient position to do the calibration (probing point and nozzle/bed-distance) #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe
//#define PROBE_OFFSET_WIZARD_XY_POS { X_CENTER, Y_CENTER }
#endif
#if ENABLED(AUTO_BED_LEVELING_BILINEAR)
// Add a calibration procedure in the Probe Offsets menu
// to compensate for twist in the X-axis.
//#define X_AXIS_TWIST_COMPENSATION
#if ENABLED(X_AXIS_TWIST_COMPENSATION)
/**
* Enable to init the Probe Z-Offset when starting the Wizard.
* Use a height slightly above the estimated nozzle-to-probe Z offset.
* For example, with an offset of -5, consider a starting height of -4.
*/
#define XATC_START_Z 0.0
#define XATC_MAX_POINTS 3 // Number of points to probe in the wizard
#define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe
#endif
#endif #endif
#endif #endif

56
config/examples/Creality/CR-10 S5/CrealityV2.2-BLTouch/Configuration_adv.h
View file

@ -1280,37 +1280,35 @@
#define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440
#endif #endif
#if HAS_BED_PROBE && EITHER(HAS_MARLINUI_MENU, HAS_TFT_LVGL_UI)
//#define PROBE_OFFSET_WIZARD // Add a Probe Z Offset calibration option to the LCD menu
#if ENABLED(PROBE_OFFSET_WIZARD)
/**
* Enable to init the Probe Z-Offset when starting the Wizard.
* Use a height slightly above the estimated nozzle-to-probe Z offset.
* For example, with an offset of -5, consider a starting height of -4.
*/
//#define PROBE_OFFSET_WIZARD_START_Z -4.0
// Set a convenient position to do the calibration (probing point and nozzle/bed-distance)
//#define PROBE_OFFSET_WIZARD_XY_POS { X_CENTER, Y_CENTER }
#endif
#endif
#if HAS_MARLINUI_MENU #if HAS_MARLINUI_MENU
// Add Probe Z Offset calibration to the Z Probe Offsets menu #if BOTH(HAS_BED_PROBE, AUTO_BED_LEVELING_BILINEAR)
#if HAS_BED_PROBE // Add calibration in the Probe Offsets menu to compensate for X-axis twist.
//#define PROBE_OFFSET_WIZARD //#define X_AXIS_TWIST_COMPENSATION
#if ENABLED(PROBE_OFFSET_WIZARD) #if ENABLED(X_AXIS_TWIST_COMPENSATION)
// /**
// Enable to init the Probe Z-Offset when starting the Wizard. * Enable to init the Probe Z-Offset when starting the Wizard.
// Use a height slightly above the estimated nozzle-to-probe Z offset. * Use a height slightly above the estimated nozzle-to-probe Z offset.
// For example, with an offset of -5, consider a starting height of -4. * For example, with an offset of -5, consider a starting height of -4.
// */
//#define PROBE_OFFSET_WIZARD_START_Z -4.0 #define XATC_START_Z 0.0
#define XATC_MAX_POINTS 3 // Number of points to probe in the wizard
// Set a convenient position to do the calibration (probing point and nozzle/bed-distance) #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe
//#define PROBE_OFFSET_WIZARD_XY_POS { X_CENTER, Y_CENTER }
#endif
#if ENABLED(AUTO_BED_LEVELING_BILINEAR)
// Add a calibration procedure in the Probe Offsets menu
// to compensate for twist in the X-axis.
//#define X_AXIS_TWIST_COMPENSATION
#if ENABLED(X_AXIS_TWIST_COMPENSATION)
/**
* Enable to init the Probe Z-Offset when starting the Wizard.
* Use a height slightly above the estimated nozzle-to-probe Z offset.
* For example, with an offset of -5, consider a starting height of -4.
*/
#define XATC_START_Z 0.0
#define XATC_MAX_POINTS 3 // Number of points to probe in the wizard
#define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe
#endif
#endif #endif
#endif #endif

56
config/examples/Creality/CR-10 V2/Configuration_adv.h
View file

@ -1280,37 +1280,35 @@
#define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440
#endif #endif
#if HAS_BED_PROBE && EITHER(HAS_MARLINUI_MENU, HAS_TFT_LVGL_UI)
//#define PROBE_OFFSET_WIZARD // Add a Probe Z Offset calibration option to the LCD menu
#if ENABLED(PROBE_OFFSET_WIZARD)
/**
* Enable to init the Probe Z-Offset when starting the Wizard.
* Use a height slightly above the estimated nozzle-to-probe Z offset.
* For example, with an offset of -5, consider a starting height of -4.
*/
//#define PROBE_OFFSET_WIZARD_START_Z -4.0
// Set a convenient position to do the calibration (probing point and nozzle/bed-distance)
//#define PROBE_OFFSET_WIZARD_XY_POS { X_CENTER, Y_CENTER }
#endif
#endif
#if HAS_MARLINUI_MENU #if HAS_MARLINUI_MENU
// Add Probe Z Offset calibration to the Z Probe Offsets menu #if BOTH(HAS_BED_PROBE, AUTO_BED_LEVELING_BILINEAR)
#if HAS_BED_PROBE // Add calibration in the Probe Offsets menu to compensate for X-axis twist.
//#define PROBE_OFFSET_WIZARD //#define X_AXIS_TWIST_COMPENSATION
#if ENABLED(PROBE_OFFSET_WIZARD) #if ENABLED(X_AXIS_TWIST_COMPENSATION)
// /**
// Enable to init the Probe Z-Offset when starting the Wizard. * Enable to init the Probe Z-Offset when starting the Wizard.
// Use a height slightly above the estimated nozzle-to-probe Z offset. * Use a height slightly above the estimated nozzle-to-probe Z offset.
// For example, with an offset of -5, consider a starting height of -4. * For example, with an offset of -5, consider a starting height of -4.
// */
//#define PROBE_OFFSET_WIZARD_START_Z -4.0 #define XATC_START_Z 0.0
#define XATC_MAX_POINTS 3 // Number of points to probe in the wizard
// Set a convenient position to do the calibration (probing point and nozzle/bed-distance) #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe
//#define PROBE_OFFSET_WIZARD_XY_POS { X_CENTER, Y_CENTER }
#endif
#if ENABLED(AUTO_BED_LEVELING_BILINEAR)
// Add a calibration procedure in the Probe Offsets menu
// to compensate for twist in the X-axis.
//#define X_AXIS_TWIST_COMPENSATION
#if ENABLED(X_AXIS_TWIST_COMPENSATION)
/**
* Enable to init the Probe Z-Offset when starting the Wizard.
* Use a height slightly above the estimated nozzle-to-probe Z offset.
* For example, with an offset of -5, consider a starting height of -4.
*/
#define XATC_START_Z 0.0
#define XATC_MAX_POINTS 3 // Number of points to probe in the wizard
#define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe
#endif
#endif #endif
#endif #endif

56
config/examples/Creality/CR-10 V3/Configuration_adv.h
View file

@ -1282,37 +1282,35 @@
#define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440
#endif #endif
#if HAS_BED_PROBE && EITHER(HAS_MARLINUI_MENU, HAS_TFT_LVGL_UI)
//#define PROBE_OFFSET_WIZARD // Add a Probe Z Offset calibration option to the LCD menu
#if ENABLED(PROBE_OFFSET_WIZARD)
/**
* Enable to init the Probe Z-Offset when starting the Wizard.
* Use a height slightly above the estimated nozzle-to-probe Z offset.
* For example, with an offset of -5, consider a starting height of -4.
*/
//#define PROBE_OFFSET_WIZARD_START_Z -4.0
// Set a convenient position to do the calibration (probing point and nozzle/bed-distance)
//#define PROBE_OFFSET_WIZARD_XY_POS { X_CENTER, Y_CENTER }
#endif
#endif
#if HAS_MARLINUI_MENU #if HAS_MARLINUI_MENU
// Add Probe Z Offset calibration to the Z Probe Offsets menu #if BOTH(HAS_BED_PROBE, AUTO_BED_LEVELING_BILINEAR)
#if HAS_BED_PROBE // Add calibration in the Probe Offsets menu to compensate for X-axis twist.
//#define PROBE_OFFSET_WIZARD //#define X_AXIS_TWIST_COMPENSATION
#if ENABLED(PROBE_OFFSET_WIZARD) #if ENABLED(X_AXIS_TWIST_COMPENSATION)
// /**
// Enable to init the Probe Z-Offset when starting the Wizard. * Enable to init the Probe Z-Offset when starting the Wizard.
// Use a height slightly above the estimated nozzle-to-probe Z offset. * Use a height slightly above the estimated nozzle-to-probe Z offset.
// For example, with an offset of -5, consider a starting height of -4. * For example, with an offset of -5, consider a starting height of -4.
// */
//#define PROBE_OFFSET_WIZARD_START_Z -4.0 #define XATC_START_Z 0.0
#define XATC_MAX_POINTS 3 // Number of points to probe in the wizard
// Set a convenient position to do the calibration (probing point and nozzle/bed-distance) #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe
//#define PROBE_OFFSET_WIZARD_XY_POS { X_CENTER, Y_CENTER }
#endif
#if ENABLED(AUTO_BED_LEVELING_BILINEAR)
// Add a calibration procedure in the Probe Offsets menu
// to compensate for twist in the X-axis.
//#define X_AXIS_TWIST_COMPENSATION
#if ENABLED(X_AXIS_TWIST_COMPENSATION)
/**
* Enable to init the Probe Z-Offset when starting the Wizard.
* Use a height slightly above the estimated nozzle-to-probe Z offset.
* For example, with an offset of -5, consider a starting height of -4.
*/
#define XATC_START_Z 0.0
#define XATC_MAX_POINTS 3 // Number of points to probe in the wizard
#define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe
#endif
#endif #endif
#endif #endif

56
config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h
View file

@ -1280,37 +1280,35 @@
#define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440
#endif #endif
#if HAS_BED_PROBE && EITHER(HAS_MARLINUI_MENU, HAS_TFT_LVGL_UI)
//#define PROBE_OFFSET_WIZARD // Add a Probe Z Offset calibration option to the LCD menu
#if ENABLED(PROBE_OFFSET_WIZARD)
/**
* Enable to init the Probe Z-Offset when starting the Wizard.
* Use a height slightly above the estimated nozzle-to-probe Z offset.
* For example, with an offset of -5, consider a starting height of -4.
*/
//#define PROBE_OFFSET_WIZARD_START_Z -4.0
// Set a convenient position to do the calibration (probing point and nozzle/bed-distance)
//#define PROBE_OFFSET_WIZARD_XY_POS { X_CENTER, Y_CENTER }
#endif
#endif
#if HAS_MARLINUI_MENU #if HAS_MARLINUI_MENU
// Add Probe Z Offset calibration to the Z Probe Offsets menu #if BOTH(HAS_BED_PROBE, AUTO_BED_LEVELING_BILINEAR)
#if HAS_BED_PROBE // Add calibration in the Probe Offsets menu to compensate for X-axis twist.
//#define PROBE_OFFSET_WIZARD //#define X_AXIS_TWIST_COMPENSATION
#if ENABLED(PROBE_OFFSET_WIZARD) #if ENABLED(X_AXIS_TWIST_COMPENSATION)
// /**
// Enable to init the Probe Z-Offset when starting the Wizard. * Enable to init the Probe Z-Offset when starting the Wizard.
// Use a height slightly above the estimated nozzle-to-probe Z offset. * Use a height slightly above the estimated nozzle-to-probe Z offset.
// For example, with an offset of -5, consider a starting height of -4. * For example, with an offset of -5, consider a starting height of -4.
// */
//#define PROBE_OFFSET_WIZARD_START_Z -4.0 #define XATC_START_Z 0.0
#define XATC_MAX_POINTS 3 // Number of points to probe in the wizard
// Set a convenient position to do the calibration (probing point and nozzle/bed-distance) #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe
//#define PROBE_OFFSET_WIZARD_XY_POS { X_CENTER, Y_CENTER }
#endif
#if ENABLED(AUTO_BED_LEVELING_BILINEAR)
// Add a calibration procedure in the Probe Offsets menu
// to compensate for twist in the X-axis.
//#define X_AXIS_TWIST_COMPENSATION
#if ENABLED(X_AXIS_TWIST_COMPENSATION)
/**
* Enable to init the Probe Z-Offset when starting the Wizard.
* Use a height slightly above the estimated nozzle-to-probe Z offset.
* For example, with an offset of -5, consider a starting height of -4.
*/
#define XATC_START_Z 0.0
#define XATC_MAX_POINTS 3 // Number of points to probe in the wizard
#define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe
#endif
#endif #endif
#endif #endif

56
config/examples/Creality/CR-10/CrealityV1/Configuration_adv.h
View file

@ -1280,37 +1280,35 @@
#define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440
#endif #endif
#if HAS_BED_PROBE && EITHER(HAS_MARLINUI_MENU, HAS_TFT_LVGL_UI)
//#define PROBE_OFFSET_WIZARD // Add a Probe Z Offset calibration option to the LCD menu
#if ENABLED(PROBE_OFFSET_WIZARD)
/**
* Enable to init the Probe Z-Offset when starting the Wizard.
* Use a height slightly above the estimated nozzle-to-probe Z offset.
* For example, with an offset of -5, consider a starting height of -4.
*/
//#define PROBE_OFFSET_WIZARD_START_Z -4.0
// Set a convenient position to do the calibration (probing point and nozzle/bed-distance)
//#define PROBE_OFFSET_WIZARD_XY_POS { X_CENTER, Y_CENTER }
#endif
#endif
#if HAS_MARLINUI_MENU #if HAS_MARLINUI_MENU
// Add Probe Z Offset calibration to the Z Probe Offsets menu #if BOTH(HAS_BED_PROBE, AUTO_BED_LEVELING_BILINEAR)
#if HAS_BED_PROBE // Add calibration in the Probe Offsets menu to compensate for X-axis twist.
//#define PROBE_OFFSET_WIZARD //#define X_AXIS_TWIST_COMPENSATION
#if ENABLED(PROBE_OFFSET_WIZARD) #if ENABLED(X_AXIS_TWIST_COMPENSATION)
// /**
// Enable to init the Probe Z-Offset when starting the Wizard. * Enable to init the Probe Z-Offset when starting the Wizard.
// Use a height slightly above the estimated nozzle-to-probe Z offset. * Use a height slightly above the estimated nozzle-to-probe Z offset.
// For example, with an offset of -5, consider a starting height of -4. * For example, with an offset of -5, consider a starting height of -4.
// */
//#define PROBE_OFFSET_WIZARD_START_Z -4.0 #define XATC_START_Z 0.0
#define XATC_MAX_POINTS 3 // Number of points to probe in the wizard
// Set a convenient position to do the calibration (probing point and nozzle/bed-distance) #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe
//#define PROBE_OFFSET_WIZARD_XY_POS { X_CENTER, Y_CENTER }
#endif
#if ENABLED(AUTO_BED_LEVELING_BILINEAR)
// Add a calibration procedure in the Probe Offsets menu
// to compensate for twist in the X-axis.
//#define X_AXIS_TWIST_COMPENSATION
#if ENABLED(X_AXIS_TWIST_COMPENSATION)
/**
* Enable to init the Probe Z-Offset when starting the Wizard.
* Use a height slightly above the estimated nozzle-to-probe Z offset.
* For example, with an offset of -5, consider a starting height of -4.
*/
#define XATC_START_Z 0.0
#define XATC_MAX_POINTS 3 // Number of points to probe in the wizard
#define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe
#endif
#endif #endif
#endif #endif

56
config/examples/Creality/CR-10S/BigTreeTech SKR 1.4 Turbo TMC2209/Configuration_adv.h
View file

@ -1280,37 +1280,35 @@
#define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440
#endif #endif
#if HAS_BED_PROBE && EITHER(HAS_MARLINUI_MENU, HAS_TFT_LVGL_UI)
//#define PROBE_OFFSET_WIZARD // Add a Probe Z Offset calibration option to the LCD menu
#if ENABLED(PROBE_OFFSET_WIZARD)
/**
* Enable to init the Probe Z-Offset when starting the Wizard.
* Use a height slightly above the estimated nozzle-to-probe Z offset.
* For example, with an offset of -5, consider a starting height of -4.
*/
//#define PROBE_OFFSET_WIZARD_START_Z -4.0
// Set a convenient position to do the calibration (probing point and nozzle/bed-distance)
//#define PROBE_OFFSET_WIZARD_XY_POS { X_CENTER, Y_CENTER }
#endif
#endif
#if HAS_MARLINUI_MENU #if HAS_MARLINUI_MENU
// Add Probe Z Offset calibration to the Z Probe Offsets menu #if BOTH(HAS_BED_PROBE, AUTO_BED_LEVELING_BILINEAR)
#if HAS_BED_PROBE // Add calibration in the Probe Offsets menu to compensate for X-axis twist.
//#define PROBE_OFFSET_WIZARD //#define X_AXIS_TWIST_COMPENSATION
#if ENABLED(PROBE_OFFSET_WIZARD) #if ENABLED(X_AXIS_TWIST_COMPENSATION)
// /**
// Enable to init the Probe Z-Offset when starting the Wizard. * Enable to init the Probe Z-Offset when starting the Wizard.
// Use a height slightly above the estimated nozzle-to-probe Z offset. * Use a height slightly above the estimated nozzle-to-probe Z offset.
// For example, with an offset of -5, consider a starting height of -4. * For example, with an offset of -5, consider a starting height of -4.
// */
//#define PROBE_OFFSET_WIZARD_START_Z -4.0 #define XATC_START_Z 0.0
#define XATC_MAX_POINTS 3 // Number of points to probe in the wizard
// Set a convenient position to do the calibration (probing point and nozzle/bed-distance) #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe
//#define PROBE_OFFSET_WIZARD_XY_POS { X_CENTER, Y_CENTER }
#endif
#if ENABLED(AUTO_BED_LEVELING_BILINEAR)
// Add a calibration procedure in the Probe Offsets menu
// to compensate for twist in the X-axis.
//#define X_AXIS_TWIST_COMPENSATION
#if ENABLED(X_AXIS_TWIST_COMPENSATION)
/**
* Enable to init the Probe Z-Offset when starting the Wizard.
* Use a height slightly above the estimated nozzle-to-probe Z offset.
* For example, with an offset of -5, consider a starting height of -4.
*/
#define XATC_START_Z 0.0
#define XATC_MAX_POINTS 3 // Number of points to probe in the wizard
#define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe
#endif
#endif #endif
#endif #endif

56
config/examples/Creality/CR-10S/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h
View file

@ -1280,37 +1280,35 @@
#define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440
#endif #endif
#if HAS_BED_PROBE && EITHER(HAS_MARLINUI_MENU, HAS_TFT_LVGL_UI)
//#define PROBE_OFFSET_WIZARD // Add a Probe Z Offset calibration option to the LCD menu
#if ENABLED(PROBE_OFFSET_WIZARD)
/**
* Enable to init the Probe Z-Offset when starting the Wizard.
* Use a height slightly above the estimated nozzle-to-probe Z offset.
* For example, with an offset of -5, consider a starting height of -4.
*/
//#define PROBE_OFFSET_WIZARD_START_Z -4.0
// Set a convenient position to do the calibration (probing point and nozzle/bed-distance)
//#define PROBE_OFFSET_WIZARD_XY_POS { X_CENTER, Y_CENTER }
#endif
#endif
#if HAS_MARLINUI_MENU #if HAS_MARLINUI_MENU
// Add Probe Z Offset calibration to the Z Probe Offsets menu #if BOTH(HAS_BED_PROBE, AUTO_BED_LEVELING_BILINEAR)
#if HAS_BED_PROBE // Add calibration in the Probe Offsets menu to compensate for X-axis twist.
//#define PROBE_OFFSET_WIZARD //#define X_AXIS_TWIST_COMPENSATION
#if ENABLED(PROBE_OFFSET_WIZARD) #if ENABLED(X_AXIS_TWIST_COMPENSATION)
// /**
// Enable to init the Probe Z-Offset when starting the Wizard. * Enable to init the Probe Z-Offset when starting the Wizard.
// Use a height slightly above the estimated nozzle-to-probe Z offset. * Use a height slightly above the estimated nozzle-to-probe Z offset.
// For example, with an offset of -5, consider a starting height of -4. * For example, with an offset of -5, consider a starting height of -4.
// */
//#define PROBE_OFFSET_WIZARD_START_Z -4.0 #define XATC_START_Z 0.0
#define XATC_MAX_POINTS 3 // Number of points to probe in the wizard
// Set a convenient position to do the calibration (probing point and nozzle/bed-distance) #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe
//#define PROBE_OFFSET_WIZARD_XY_POS { X_CENTER, Y_CENTER }
#endif
#if ENABLED(AUTO_BED_LEVELING_BILINEAR)
// Add a calibration procedure in the Probe Offsets menu
// to compensate for twist in the X-axis.
//#define X_AXIS_TWIST_COMPENSATION
#if ENABLED(X_AXIS_TWIST_COMPENSATION)
/**
* Enable to init the Probe Z-Offset when starting the Wizard.
* Use a height slightly above the estimated nozzle-to-probe Z offset.
* For example, with an offset of -5, consider a starting height of -4.
*/
#define XATC_START_Z 0.0
#define XATC_MAX_POINTS 3 // Number of points to probe in the wizard
#define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe
#endif
#endif #endif
#endif #endif

56
config/examples/Creality/CR-10S/BigTreeTech SKR Pro v1.2/Configuration_adv.h
View file

@ -1280,37 +1280,35 @@
#define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440
#endif #endif
#if HAS_BED_PROBE && EITHER(HAS_MARLINUI_MENU, HAS_TFT_LVGL_UI)
//#define PROBE_OFFSET_WIZARD // Add a Probe Z Offset calibration option to the LCD menu
#if ENABLED(PROBE_OFFSET_WIZARD)
/**
* Enable to init the Probe Z-Offset when starting the Wizard.
* Use a height slightly above the estimated nozzle-to-probe Z offset.
* For example, with an offset of -5, consider a starting height of -4.
*/
//#define PROBE_OFFSET_WIZARD_START_Z -4.0
// Set a convenient position to do the calibration (probing point and nozzle/bed-distance)
//#define PROBE_OFFSET_WIZARD_XY_POS { X_CENTER, Y_CENTER }
#endif
#endif
#if HAS_MARLINUI_MENU #if HAS_MARLINUI_MENU
// Add Probe Z Offset calibration to the Z Probe Offsets menu #if BOTH(HAS_BED_PROBE, AUTO_BED_LEVELING_BILINEAR)
#if HAS_BED_PROBE // Add calibration in the Probe Offsets menu to compensate for X-axis twist.
//#define PROBE_OFFSET_WIZARD //#define X_AXIS_TWIST_COMPENSATION
#if ENABLED(PROBE_OFFSET_WIZARD) #if ENABLED(X_AXIS_TWIST_COMPENSATION)
// /**
// Enable to init the Probe Z-Offset when starting the Wizard. * Enable to init the Probe Z-Offset when starting the Wizard.
// Use a height slightly above the estimated nozzle-to-probe Z offset. * Use a height slightly above the estimated nozzle-to-probe Z offset.
// For example, with an offset of -5, consider a starting height of -4. * For example, with an offset of -5, consider a starting height of -4.
// */
//#define PROBE_OFFSET_WIZARD_START_Z -4.0 #define XATC_START_Z 0.0
#define XATC_MAX_POINTS 3 // Number of points to probe in the wizard
// Set a convenient position to do the calibration (probing point and nozzle/bed-distance) #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe
//#define PROBE_OFFSET_WIZARD_XY_POS { X_CENTER, Y_CENTER }
#endif
#if ENABLED(AUTO_BED_LEVELING_BILINEAR)
// Add a calibration procedure in the Probe Offsets menu
// to compensate for twist in the X-axis.
//#define X_AXIS_TWIST_COMPENSATION
#if ENABLED(X_AXIS_TWIST_COMPENSATION)
/**
* Enable to init the Probe Z-Offset when starting the Wizard.
* Use a height slightly above the estimated nozzle-to-probe Z offset.
* For example, with an offset of -5, consider a starting height of -4.
*/
#define XATC_START_Z 0.0
#define XATC_MAX_POINTS 3 // Number of points to probe in the wizard
#define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe
#endif
#endif #endif
#endif #endif

56
config/examples/Creality/CR-10S/CrealityV1/Configuration_adv.h
View file

@ -1280,37 +1280,35 @@
#define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440
#endif #endif
#if HAS_BED_PROBE && EITHER(HAS_MARLINUI_MENU, HAS_TFT_LVGL_UI)
//#define PROBE_OFFSET_WIZARD // Add a Probe Z Offset calibration option to the LCD menu
#if ENABLED(PROBE_OFFSET_WIZARD)
/**
* Enable to init the Probe Z-Offset when starting the Wizard.
* Use a height slightly above the estimated nozzle-to-probe Z offset.
* For example, with an offset of -5, consider a starting height of -4.
*/
//#define PROBE_OFFSET_WIZARD_START_Z -4.0
// Set a convenient position to do the calibration (probing point and nozzle/bed-distance)
//#define PROBE_OFFSET_WIZARD_XY_POS { X_CENTER, Y_CENTER }
#endif
#endif
#if HAS_MARLINUI_MENU #if HAS_MARLINUI_MENU
// Add Probe Z Offset calibration to the Z Probe Offsets menu #if BOTH(HAS_BED_PROBE, AUTO_BED_LEVELING_BILINEAR)
#if HAS_BED_PROBE // Add calibration in the Probe Offsets menu to compensate for X-axis twist.
//#define PROBE_OFFSET_WIZARD //#define X_AXIS_TWIST_COMPENSATION
#if ENABLED(PROBE_OFFSET_WIZARD) #if ENABLED(X_AXIS_TWIST_COMPENSATION)
// /**
// Enable to init the Probe Z-Offset when starting the Wizard. * Enable to init the Probe Z-Offset when starting the Wizard.
// Use a height slightly above the estimated nozzle-to-probe Z offset. * Use a height slightly above the estimated nozzle-to-probe Z offset.
// For example, with an offset of -5, consider a starting height of -4. * For example, with an offset of -5, consider a starting height of -4.
// */
//#define PROBE_OFFSET_WIZARD_START_Z -4.0 #define XATC_START_Z 0.0
#define XATC_MAX_POINTS 3 // Number of points to probe in the wizard
// Set a convenient position to do the calibration (probing point and nozzle/bed-distance) #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe
//#define PROBE_OFFSET_WIZARD_XY_POS { X_CENTER, Y_CENTER }
#endif
#if ENABLED(AUTO_BED_LEVELING_BILINEAR)
// Add a calibration procedure in the Probe Offsets menu
// to compensate for twist in the X-axis.
//#define X_AXIS_TWIST_COMPENSATION
#if ENABLED(X_AXIS_TWIST_COMPENSATION)
/**
* Enable to init the Probe Z-Offset when starting the Wizard.
* Use a height slightly above the estimated nozzle-to-probe Z offset.
* For example, with an offset of -5, consider a starting height of -4.
*/
#define XATC_START_Z 0.0
#define XATC_MAX_POINTS 3 // Number of points to probe in the wizard
#define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe
#endif
#endif #endif
#endif #endif

56
config/examples/Creality/CR-20 Pro/Configuration_adv.h
View file

@ -1280,37 +1280,35 @@
#define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440
#endif #endif
#if HAS_BED_PROBE && EITHER(HAS_MARLINUI_MENU, HAS_TFT_LVGL_UI)
//#define PROBE_OFFSET_WIZARD // Add a Probe Z Offset calibration option to the LCD menu
#if ENABLED(PROBE_OFFSET_WIZARD)
/**
* Enable to init the Probe Z-Offset when starting the Wizard.
* Use a height slightly above the estimated nozzle-to-probe Z offset.
* For example, with an offset of -5, consider a starting height of -4.
*/
//#define PROBE_OFFSET_WIZARD_START_Z -4.0
// Set a convenient position to do the calibration (probing point and nozzle/bed-distance)
//#define PROBE_OFFSET_WIZARD_XY_POS { X_CENTER, Y_CENTER }
#endif
#endif
#if HAS_MARLINUI_MENU #if HAS_MARLINUI_MENU
// Add Probe Z Offset calibration to the Z Probe Offsets menu #if BOTH(HAS_BED_PROBE, AUTO_BED_LEVELING_BILINEAR)
#if HAS_BED_PROBE // Add calibration in the Probe Offsets menu to compensate for X-axis twist.
//#define PROBE_OFFSET_WIZARD //#define X_AXIS_TWIST_COMPENSATION
#if ENABLED(PROBE_OFFSET_WIZARD) #if ENABLED(X_AXIS_TWIST_COMPENSATION)
// /**
// Enable to init the Probe Z-Offset when starting the Wizard. * Enable to init the Probe Z-Offset when starting the Wizard.
// Use a height slightly above the estimated nozzle-to-probe Z offset. * Use a height slightly above the estimated nozzle-to-probe Z offset.
// For example, with an offset of -5, consider a starting height of -4. * For example, with an offset of -5, consider a starting height of -4.
// */
//#define PROBE_OFFSET_WIZARD_START_Z -4.0 #define XATC_START_Z 0.0
#define XATC_MAX_POINTS 3 // Number of points to probe in the wizard
// Set a convenient position to do the calibration (probing point and nozzle/bed-distance) #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe
//#define PROBE_OFFSET_WIZARD_XY_POS { X_CENTER, Y_CENTER }
#endif
#if ENABLED(AUTO_BED_LEVELING_BILINEAR)
// Add a calibration procedure in the Probe Offsets menu
// to compensate for twist in the X-axis.
//#define X_AXIS_TWIST_COMPENSATION
#if ENABLED(X_AXIS_TWIST_COMPENSATION)
/**
* Enable to init the Probe Z-Offset when starting the Wizard.
* Use a height slightly above the estimated nozzle-to-probe Z offset.
* For example, with an offset of -5, consider a starting height of -4.
*/
#define XATC_START_Z 0.0
#define XATC_MAX_POINTS 3 // Number of points to probe in the wizard
#define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe
#endif
#endif #endif
#endif #endif

56
config/examples/Creality/CR-20/Configuration_adv.h
View file

@ -1280,37 +1280,35 @@
#define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440
#endif #endif
#if HAS_BED_PROBE && EITHER(HAS_MARLINUI_MENU, HAS_TFT_LVGL_UI)
//#define PROBE_OFFSET_WIZARD // Add a Probe Z Offset calibration option to the LCD menu
#if ENABLED(PROBE_OFFSET_WIZARD)
/**
* Enable to init the Probe Z-Offset when starting the Wizard.
* Use a height slightly above the estimated nozzle-to-probe Z offset.
* For example, with an offset of -5, consider a starting height of -4.
*/
//#define PROBE_OFFSET_WIZARD_START_Z -4.0
// Set a convenient position to do the calibration (probing point and nozzle/bed-distance)
//#define PROBE_OFFSET_WIZARD_XY_POS { X_CENTER, Y_CENTER }
#endif
#endif
#if HAS_MARLINUI_MENU #if HAS_MARLINUI_MENU
// Add Probe Z Offset calibration to the Z Probe Offsets menu #if BOTH(HAS_BED_PROBE, AUTO_BED_LEVELING_BILINEAR)
#if HAS_BED_PROBE // Add calibration in the Probe Offsets menu to compensate for X-axis twist.
//#define PROBE_OFFSET_WIZARD //#define X_AXIS_TWIST_COMPENSATION
#if ENABLED(PROBE_OFFSET_WIZARD) #if ENABLED(X_AXIS_TWIST_COMPENSATION)
// /**
// Enable to init the Probe Z-Offset when starting the Wizard. * Enable to init the Probe Z-Offset when starting the Wizard.
// Use a height slightly above the estimated nozzle-to-probe Z offset. * Use a height slightly above the estimated nozzle-to-probe Z offset.
// For example, with an offset of -5, consider a starting height of -4. * For example, with an offset of -5, consider a starting height of -4.
// */
//#define PROBE_OFFSET_WIZARD_START_Z -4.0 #define XATC_START_Z 0.0
#define XATC_MAX_POINTS 3 // Number of points to probe in the wizard
// Set a convenient position to do the calibration (probing point and nozzle/bed-distance) #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe
//#define PROBE_OFFSET_WIZARD_XY_POS { X_CENTER, Y_CENTER }
#endif
#if ENABLED(AUTO_BED_LEVELING_BILINEAR)
// Add a calibration procedure in the Probe Offsets menu
// to compensate for twist in the X-axis.
//#define X_AXIS_TWIST_COMPENSATION
#if ENABLED(X_AXIS_TWIST_COMPENSATION)
/**
* Enable to init the Probe Z-Offset when starting the Wizard.
* Use a height slightly above the estimated nozzle-to-probe Z offset.
* For example, with an offset of -5, consider a starting height of -4.
*/
#define XATC_START_Z 0.0
#define XATC_MAX_POINTS 3 // Number of points to probe in the wizard
#define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe
#endif
#endif #endif
#endif #endif

56
config/examples/Creality/CR-30 PrintMill/Configuration_adv.h
View file

@ -1280,37 +1280,35 @@
#define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440
#endif #endif
#if HAS_BED_PROBE && EITHER(HAS_MARLINUI_MENU, HAS_TFT_LVGL_UI)
//#define PROBE_OFFSET_WIZARD // Add a Probe Z Offset calibration option to the LCD menu
#if ENABLED(PROBE_OFFSET_WIZARD)
/**
* Enable to init the Probe Z-Offset when starting the Wizard.
* Use a height slightly above the estimated nozzle-to-probe Z offset.
* For example, with an offset of -5, consider a starting height of -4.
*/
//#define PROBE_OFFSET_WIZARD_START_Z -4.0
// Set a convenient position to do the calibration (probing point and nozzle/bed-distance)
//#define PROBE_OFFSET_WIZARD_XY_POS { X_CENTER, Y_CENTER }
#endif
#endif
#if HAS_MARLINUI_MENU #if HAS_MARLINUI_MENU
// Add Probe Z Offset calibration to the Z Probe Offsets menu #if BOTH(HAS_BED_PROBE, AUTO_BED_LEVELING_BILINEAR)
#if HAS_BED_PROBE // Add calibration in the Probe Offsets menu to compensate for X-axis twist.
//#define PROBE_OFFSET_WIZARD //#define X_AXIS_TWIST_COMPENSATION
#if ENABLED(PROBE_OFFSET_WIZARD) #if ENABLED(X_AXIS_TWIST_COMPENSATION)
// /**
// Enable to init the Probe Z-Offset when starting the Wizard. * Enable to init the Probe Z-Offset when starting the Wizard.
// Use a height slightly above the estimated nozzle-to-probe Z offset. * Use a height slightly above the estimated nozzle-to-probe Z offset.
// For example, with an offset of -5, consider a starting height of -4. * For example, with an offset of -5, consider a starting height of -4.
// */
//#define PROBE_OFFSET_WIZARD_START_Z -4.0 #define XATC_START_Z 0.0
#define XATC_MAX_POINTS 3 // Number of points to probe in the wizard
// Set a convenient position to do the calibration (probing point and nozzle/bed-distance) #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe
//#define PROBE_OFFSET_WIZARD_XY_POS { X_CENTER, Y_CENTER }
#endif
#if ENABLED(AUTO_BED_LEVELING_BILINEAR)
// Add a calibration procedure in the Probe Offsets menu
// to compensate for twist in the X-axis.
//#define X_AXIS_TWIST_COMPENSATION
#if ENABLED(X_AXIS_TWIST_COMPENSATION)
/**
* Enable to init the Probe Z-Offset when starting the Wizard.
* Use a height slightly above the estimated nozzle-to-probe Z offset.
* For example, with an offset of -5, consider a starting height of -4.
*/
#define XATC_START_Z 0.0
#define XATC_MAX_POINTS 3 // Number of points to probe in the wizard
#define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe
#endif
#endif #endif
#endif #endif

56
config/examples/Creality/CR-6 SE/Configuration_adv.h
View file

@ -1281,37 +1281,35 @@
#define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440
#endif #endif
#if HAS_BED_PROBE && EITHER(HAS_MARLINUI_MENU, HAS_TFT_LVGL_UI)
//#define PROBE_OFFSET_WIZARD // Add a Probe Z Offset calibration option to the LCD menu
#if ENABLED(PROBE_OFFSET_WIZARD)
/**
* Enable to init the Probe Z-Offset when starting the Wizard.
* Use a height slightly above the estimated nozzle-to-probe Z offset.
* For example, with an offset of -5, consider a starting height of -4.
*/
//#define PROBE_OFFSET_WIZARD_START_Z -4.0
// Set a convenient position to do the calibration (probing point and nozzle/bed-distance)
//#define PROBE_OFFSET_WIZARD_XY_POS { X_CENTER, Y_CENTER }
#endif
#endif
#if HAS_MARLINUI_MENU #if HAS_MARLINUI_MENU
// Add Probe Z Offset calibration to the Z Probe Offsets menu #if BOTH(HAS_BED_PROBE, AUTO_BED_LEVELING_BILINEAR)
#if HAS_BED_PROBE // Add calibration in the Probe Offsets menu to compensate for X-axis twist.
//#define PROBE_OFFSET_WIZARD //#define X_AXIS_TWIST_COMPENSATION
#if ENABLED(PROBE_OFFSET_WIZARD) #if ENABLED(X_AXIS_TWIST_COMPENSATION)
// /**
// Enable to init the Probe Z-Offset when starting the Wizard. * Enable to init the Probe Z-Offset when starting the Wizard.
// Use a height slightly above the estimated nozzle-to-probe Z offset. * Use a height slightly above the estimated nozzle-to-probe Z offset.
// For example, with an offset of -5, consider a starting height of -4. * For example, with an offset of -5, consider a starting height of -4.
// */
//#define PROBE_OFFSET_WIZARD_START_Z -4.0 #define XATC_START_Z 0.0
#define XATC_MAX_POINTS 3 // Number of points to probe in the wizard
// Set a convenient position to do the calibration (probing point and nozzle/bed-distance) #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe
//#define PROBE_OFFSET_WIZARD_XY_POS { X_CENTER, Y_CENTER }
#endif
#if ENABLED(AUTO_BED_LEVELING_BILINEAR)
// Add a calibration procedure in the Probe Offsets menu
// to compensate for twist in the X-axis.
//#define X_AXIS_TWIST_COMPENSATION
#if ENABLED(X_AXIS_TWIST_COMPENSATION)
/**
* Enable to init the Probe Z-Offset when starting the Wizard.
* Use a height slightly above the estimated nozzle-to-probe Z offset.
* For example, with an offset of -5, consider a starting height of -4.
*/
#define XATC_START_Z 0.0
#define XATC_MAX_POINTS 3 // Number of points to probe in the wizard
#define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe
#endif
#endif #endif
#endif #endif

56
config/examples/Creality/CR-8/Configuration_adv.h
View file

@ -1280,37 +1280,35 @@
#define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440
#endif #endif
#if HAS_BED_PROBE && EITHER(HAS_MARLINUI_MENU, HAS_TFT_LVGL_UI)
//#define PROBE_OFFSET_WIZARD // Add a Probe Z Offset calibration option to the LCD menu
#if ENABLED(PROBE_OFFSET_WIZARD)
/**
* Enable to init the Probe Z-Offset when starting the Wizard.
* Use a height slightly above the estimated nozzle-to-probe Z offset.
* For example, with an offset of -5, consider a starting height of -4.
*/
//#define PROBE_OFFSET_WIZARD_START_Z -4.0
// Set a convenient position to do the calibration (probing point and nozzle/bed-distance)
//#define PROBE_OFFSET_WIZARD_XY_POS { X_CENTER, Y_CENTER }
#endif
#endif
#if HAS_MARLINUI_MENU #if HAS_MARLINUI_MENU
// Add Probe Z Offset calibration to the Z Probe Offsets menu #if BOTH(HAS_BED_PROBE, AUTO_BED_LEVELING_BILINEAR)
#if HAS_BED_PROBE // Add calibration in the Probe Offsets menu to compensate for X-axis twist.
//#define PROBE_OFFSET_WIZARD //#define X_AXIS_TWIST_COMPENSATION
#if ENABLED(PROBE_OFFSET_WIZARD) #if ENABLED(X_AXIS_TWIST_COMPENSATION)
// /**
// Enable to init the Probe Z-Offset when starting the Wizard. * Enable to init the Probe Z-Offset when starting the Wizard.
// Use a height slightly above the estimated nozzle-to-probe Z offset. * Use a height slightly above the estimated nozzle-to-probe Z offset.
// For example, with an offset of -5, consider a starting height of -4. * For example, with an offset of -5, consider a starting height of -4.
// */
//#define PROBE_OFFSET_WIZARD_START_Z -4.0 #define XATC_START_Z 0.0
#define XATC_MAX_POINTS 3 // Number of points to probe in the wizard
// Set a convenient position to do the calibration (probing point and nozzle/bed-distance) #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe
//#define PROBE_OFFSET_WIZARD_XY_POS { X_CENTER, Y_CENTER }
#endif
#if ENABLED(AUTO_BED_LEVELING_BILINEAR)
// Add a calibration procedure in the Probe Offsets menu
// to compensate for twist in the X-axis.
//#define X_AXIS_TWIST_COMPENSATION
#if ENABLED(X_AXIS_TWIST_COMPENSATION)
/**
* Enable to init the Probe Z-Offset when starting the Wizard.
* Use a height slightly above the estimated nozzle-to-probe Z offset.
* For example, with an offset of -5, consider a starting height of -4.
*/
#define XATC_START_Z 0.0
#define XATC_MAX_POINTS 3 // Number of points to probe in the wizard
#define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe
#endif
#endif #endif
#endif #endif

56
config/examples/Creality/Ender-2 Pro/CrealityV423/Configuration_adv.h
View file

@ -1281,37 +1281,35 @@
#define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440
#endif #endif
#if HAS_BED_PROBE && EITHER(HAS_MARLINUI_MENU, HAS_TFT_LVGL_UI)
//#define PROBE_OFFSET_WIZARD // Add a Probe Z Offset calibration option to the LCD menu
#if ENABLED(PROBE_OFFSET_WIZARD)
/**
* Enable to init the Probe Z-Offset when starting the Wizard.
* Use a height slightly above the estimated nozzle-to-probe Z offset.
* For example, with an offset of -5, consider a starting height of -4.
*/
//#define PROBE_OFFSET_WIZARD_START_Z -4.0
// Set a convenient position to do the calibration (probing point and nozzle/bed-distance)
//#define PROBE_OFFSET_WIZARD_XY_POS { X_CENTER, Y_CENTER }
#endif
#endif
#if HAS_MARLINUI_MENU #if HAS_MARLINUI_MENU
// Add Probe Z Offset calibration to the Z Probe Offsets menu #if BOTH(HAS_BED_PROBE, AUTO_BED_LEVELING_BILINEAR)
#if HAS_BED_PROBE // Add calibration in the Probe Offsets menu to compensate for X-axis twist.
//#define PROBE_OFFSET_WIZARD //#define X_AXIS_TWIST_COMPENSATION
#if ENABLED(PROBE_OFFSET_WIZARD) #if ENABLED(X_AXIS_TWIST_COMPENSATION)
// /**
// Enable to init the Probe Z-Offset when starting the Wizard. * Enable to init the Probe Z-Offset when starting the Wizard.
// Use a height slightly above the estimated nozzle-to-probe Z offset. * Use a height slightly above the estimated nozzle-to-probe Z offset.
// For example, with an offset of -5, consider a starting height of -4. * For example, with an offset of -5, consider a starting height of -4.
// */
//#define PROBE_OFFSET_WIZARD_START_Z -4.0 #define XATC_START_Z 0.0
#define XATC_MAX_POINTS 3 // Number of points to probe in the wizard
// Set a convenient position to do the calibration (probing point and nozzle/bed-distance) #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe
//#define PROBE_OFFSET_WIZARD_XY_POS { X_CENTER, Y_CENTER }
#endif
#if ENABLED(AUTO_BED_LEVELING_BILINEAR)
// Add a calibration procedure in the Probe Offsets menu
// to compensate for twist in the X-axis.
//#define X_AXIS_TWIST_COMPENSATION
#if ENABLED(X_AXIS_TWIST_COMPENSATION)
/**
* Enable to init the Probe Z-Offset when starting the Wizard.
* Use a height slightly above the estimated nozzle-to-probe Z offset.
* For example, with an offset of -5, consider a starting height of -4.
*/
#define XATC_START_Z 0.0
#define XATC_MAX_POINTS 3 // Number of points to probe in the wizard
#define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe
#endif
#endif #endif
#endif #endif

56
config/examples/Creality/Ender-2/Configuration_adv.h
View file

@ -1280,37 +1280,35 @@
#define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440
#endif #endif
#if HAS_BED_PROBE && EITHER(HAS_MARLINUI_MENU, HAS_TFT_LVGL_UI)
//#define PROBE_OFFSET_WIZARD // Add a Probe Z Offset calibration option to the LCD menu
#if ENABLED(PROBE_OFFSET_WIZARD)
/**
* Enable to init the Probe Z-Offset when starting the Wizard.
* Use a height slightly above the estimated nozzle-to-probe Z offset.
* For example, with an offset of -5, consider a starting height of -4.
*/
//#define PROBE_OFFSET_WIZARD_START_Z -4.0
// Set a convenient position to do the calibration (probing point and nozzle/bed-distance)
//#define PROBE_OFFSET_WIZARD_XY_POS { X_CENTER, Y_CENTER }
#endif
#endif
#if HAS_MARLINUI_MENU #if HAS_MARLINUI_MENU
// Add Probe Z Offset calibration to the Z Probe Offsets menu #if BOTH(HAS_BED_PROBE, AUTO_BED_LEVELING_BILINEAR)
#if HAS_BED_PROBE // Add calibration in the Probe Offsets menu to compensate for X-axis twist.
//#define PROBE_OFFSET_WIZARD //#define X_AXIS_TWIST_COMPENSATION
#if ENABLED(PROBE_OFFSET_WIZARD) #if ENABLED(X_AXIS_TWIST_COMPENSATION)
// /**
// Enable to init the Probe Z-Offset when starting the Wizard. * Enable to init the Probe Z-Offset when starting the Wizard.
// Use a height slightly above the estimated nozzle-to-probe Z offset. * Use a height slightly above the estimated nozzle-to-probe Z offset.
// For example, with an offset of -5, consider a starting height of -4. * For example, with an offset of -5, consider a starting height of -4.
// */
//#define PROBE_OFFSET_WIZARD_START_Z -4.0 #define XATC_START_Z 0.0
#define XATC_MAX_POINTS 3 // Number of points to probe in the wizard
// Set a convenient position to do the calibration (probing point and nozzle/bed-distance) #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe
//#define PROBE_OFFSET_WIZARD_XY_POS { X_CENTER, Y_CENTER }
#endif
#if ENABLED(AUTO_BED_LEVELING_BILINEAR)
// Add a calibration procedure in the Probe Offsets menu
// to compensate for twist in the X-axis.
//#define X_AXIS_TWIST_COMPENSATION
#if ENABLED(X_AXIS_TWIST_COMPENSATION)
/**
* Enable to init the Probe Z-Offset when starting the Wizard.
* Use a height slightly above the estimated nozzle-to-probe Z offset.
* For example, with an offset of -5, consider a starting height of -4.
*/
#define XATC_START_Z 0.0
#define XATC_MAX_POINTS 3 // Number of points to probe in the wizard
#define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe
#endif
#endif #endif
#endif #endif

56
config/examples/Creality/Ender-3 Max/Configuration_adv.h
View file

@ -1280,37 +1280,35 @@
#define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440
#endif #endif
#if HAS_BED_PROBE && EITHER(HAS_MARLINUI_MENU, HAS_TFT_LVGL_UI)
//#define PROBE_OFFSET_WIZARD // Add a Probe Z Offset calibration option to the LCD menu
#if ENABLED(PROBE_OFFSET_WIZARD)
/**
* Enable to init the Probe Z-Offset when starting the Wizard.
* Use a height slightly above the estimated nozzle-to-probe Z offset.
* For example, with an offset of -5, consider a starting height of -4.
*/
//#define PROBE_OFFSET_WIZARD_START_Z -4.0
// Set a convenient position to do the calibration (probing point and nozzle/bed-distance)
//#define PROBE_OFFSET_WIZARD_XY_POS { X_CENTER, Y_CENTER }
#endif
#endif
#if HAS_MARLINUI_MENU #if HAS_MARLINUI_MENU
// Add Probe Z Offset calibration to the Z Probe Offsets menu #if BOTH(HAS_BED_PROBE, AUTO_BED_LEVELING_BILINEAR)
#if HAS_BED_PROBE // Add calibration in the Probe Offsets menu to compensate for X-axis twist.
//#define PROBE_OFFSET_WIZARD //#define X_AXIS_TWIST_COMPENSATION
#if ENABLED(PROBE_OFFSET_WIZARD) #if ENABLED(X_AXIS_TWIST_COMPENSATION)
// /**
// Enable to init the Probe Z-Offset when starting the Wizard. * Enable to init the Probe Z-Offset when starting the Wizard.
// Use a height slightly above the estimated nozzle-to-probe Z offset. * Use a height slightly above the estimated nozzle-to-probe Z offset.
// For example, with an offset of -5, consider a starting height of -4. * For example, with an offset of -5, consider a starting height of -4.
// */
//#define PROBE_OFFSET_WIZARD_START_Z -4.0 #define XATC_START_Z 0.0
#define XATC_MAX_POINTS 3 // Number of points to probe in the wizard
// Set a convenient position to do the calibration (probing point and nozzle/bed-distance) #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe
//#define PROBE_OFFSET_WIZARD_XY_POS { X_CENTER, Y_CENTER }
#endif
#if ENABLED(AUTO_BED_LEVELING_BILINEAR)
// Add a calibration procedure in the Probe Offsets menu
// to compensate for twist in the X-axis.
//#define X_AXIS_TWIST_COMPENSATION
#if ENABLED(X_AXIS_TWIST_COMPENSATION)
/**
* Enable to init the Probe Z-Offset when starting the Wizard.
* Use a height slightly above the estimated nozzle-to-probe Z offset.
* For example, with an offset of -5, consider a starting height of -4.
*/
#define XATC_START_Z 0.0
#define XATC_MAX_POINTS 3 // Number of points to probe in the wizard
#define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe
#endif
#endif #endif
#endif #endif

56
config/examples/Creality/Ender-3 Pro/BigTreeTech SKR 1.4 Turbo/Configuration_adv.h
View file

@ -1280,37 +1280,35 @@
#define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440
#endif #endif
#if HAS_BED_PROBE && EITHER(HAS_MARLINUI_MENU, HAS_TFT_LVGL_UI)
//#define PROBE_OFFSET_WIZARD // Add a Probe Z Offset calibration option to the LCD menu
#if ENABLED(PROBE_OFFSET_WIZARD)
/**
* Enable to init the Probe Z-Offset when starting the Wizard.
* Use a height slightly above the estimated nozzle-to-probe Z offset.
* For example, with an offset of -5, consider a starting height of -4.
*/
//#define PROBE_OFFSET_WIZARD_START_Z -4.0
// Set a convenient position to do the calibration (probing point and nozzle/bed-distance)
//#define PROBE_OFFSET_WIZARD_XY_POS { X_CENTER, Y_CENTER }
#endif
#endif
#if HAS_MARLINUI_MENU #if HAS_MARLINUI_MENU
// Add Probe Z Offset calibration to the Z Probe Offsets menu #if BOTH(HAS_BED_PROBE, AUTO_BED_LEVELING_BILINEAR)
#if HAS_BED_PROBE // Add calibration in the Probe Offsets menu to compensate for X-axis twist.
//#define PROBE_OFFSET_WIZARD //#define X_AXIS_TWIST_COMPENSATION
#if ENABLED(PROBE_OFFSET_WIZARD) #if ENABLED(X_AXIS_TWIST_COMPENSATION)
// /**
// Enable to init the Probe Z-Offset when starting the Wizard. * Enable to init the Probe Z-Offset when starting the Wizard.
// Use a height slightly above the estimated nozzle-to-probe Z offset. * Use a height slightly above the estimated nozzle-to-probe Z offset.
// For example, with an offset of -5, consider a starting height of -4. * For example, with an offset of -5, consider a starting height of -4.
// */
//#define PROBE_OFFSET_WIZARD_START_Z -4.0 #define XATC_START_Z 0.0
#define XATC_MAX_POINTS 3 // Number of points to probe in the wizard
// Set a convenient position to do the calibration (probing point and nozzle/bed-distance) #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe
//#define PROBE_OFFSET_WIZARD_XY_POS { X_CENTER, Y_CENTER }
#endif
#if ENABLED(AUTO_BED_LEVELING_BILINEAR)
// Add a calibration procedure in the Probe Offsets menu
// to compensate for twist in the X-axis.
//#define X_AXIS_TWIST_COMPENSATION
#if ENABLED(X_AXIS_TWIST_COMPENSATION)
/**
* Enable to init the Probe Z-Offset when starting the Wizard.
* Use a height slightly above the estimated nozzle-to-probe Z offset.
* For example, with an offset of -5, consider a starting height of -4.
*/
#define XATC_START_Z 0.0
#define XATC_MAX_POINTS 3 // Number of points to probe in the wizard
#define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe
#endif
#endif #endif
#endif #endif

56
config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h
View file

@ -1280,37 +1280,35 @@
#define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440
#endif #endif
#if HAS_BED_PROBE && EITHER(HAS_MARLINUI_MENU, HAS_TFT_LVGL_UI)
//#define PROBE_OFFSET_WIZARD // Add a Probe Z Offset calibration option to the LCD menu
#if ENABLED(PROBE_OFFSET_WIZARD)
/**
* Enable to init the Probe Z-Offset when starting the Wizard.
* Use a height slightly above the estimated nozzle-to-probe Z offset.
* For example, with an offset of -5, consider a starting height of -4.
*/
//#define PROBE_OFFSET_WIZARD_START_Z -4.0
// Set a convenient position to do the calibration (probing point and nozzle/bed-distance)
//#define PROBE_OFFSET_WIZARD_XY_POS { X_CENTER, Y_CENTER }
#endif
#endif
#if HAS_MARLINUI_MENU #if HAS_MARLINUI_MENU
// Add Probe Z Offset calibration to the Z Probe Offsets menu #if BOTH(HAS_BED_PROBE, AUTO_BED_LEVELING_BILINEAR)
#if HAS_BED_PROBE // Add calibration in the Probe Offsets menu to compensate for X-axis twist.
//#define PROBE_OFFSET_WIZARD //#define X_AXIS_TWIST_COMPENSATION
#if ENABLED(PROBE_OFFSET_WIZARD) #if ENABLED(X_AXIS_TWIST_COMPENSATION)
// /**
// Enable to init the Probe Z-Offset when starting the Wizard. * Enable to init the Probe Z-Offset when starting the Wizard.
// Use a height slightly above the estimated nozzle-to-probe Z offset. * Use a height slightly above the estimated nozzle-to-probe Z offset.
// For example, with an offset of -5, consider a starting height of -4. * For example, with an offset of -5, consider a starting height of -4.
// */
//#define PROBE_OFFSET_WIZARD_START_Z -4.0 #define XATC_START_Z 0.0
#define XATC_MAX_POINTS 3 // Number of points to probe in the wizard
// Set a convenient position to do the calibration (probing point and nozzle/bed-distance) #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe
//#define PROBE_OFFSET_WIZARD_XY_POS { X_CENTER, Y_CENTER }
#endif
#if ENABLED(AUTO_BED_LEVELING_BILINEAR)
// Add a calibration procedure in the Probe Offsets menu
// to compensate for twist in the X-axis.
//#define X_AXIS_TWIST_COMPENSATION
#if ENABLED(X_AXIS_TWIST_COMPENSATION)
/**
* Enable to init the Probe Z-Offset when starting the Wizard.
* Use a height slightly above the estimated nozzle-to-probe Z offset.
* For example, with an offset of -5, consider a starting height of -4.
*/
#define XATC_START_Z 0.0
#define XATC_MAX_POINTS 3 // Number of points to probe in the wizard
#define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe
#endif
#endif #endif
#endif #endif

56
config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h
View file

@ -1280,37 +1280,35 @@
#define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440
#endif #endif
#if HAS_BED_PROBE && EITHER(HAS_MARLINUI_MENU, HAS_TFT_LVGL_UI)
//#define PROBE_OFFSET_WIZARD // Add a Probe Z Offset calibration option to the LCD menu
#if ENABLED(PROBE_OFFSET_WIZARD)
/**
* Enable to init the Probe Z-Offset when starting the Wizard.
* Use a height slightly above the estimated nozzle-to-probe Z offset.
* For example, with an offset of -5, consider a starting height of -4.
*/
//#define PROBE_OFFSET_WIZARD_START_Z -4.0
// Set a convenient position to do the calibration (probing point and nozzle/bed-distance)
//#define PROBE_OFFSET_WIZARD_XY_POS { X_CENTER, Y_CENTER }
#endif
#endif
#if HAS_MARLINUI_MENU #if HAS_MARLINUI_MENU
// Add Probe Z Offset calibration to the Z Probe Offsets menu #if BOTH(HAS_BED_PROBE, AUTO_BED_LEVELING_BILINEAR)
#if HAS_BED_PROBE // Add calibration in the Probe Offsets menu to compensate for X-axis twist.
//#define PROBE_OFFSET_WIZARD //#define X_AXIS_TWIST_COMPENSATION
#if ENABLED(PROBE_OFFSET_WIZARD) #if ENABLED(X_AXIS_TWIST_COMPENSATION)
// /**
// Enable to init the Probe Z-Offset when starting the Wizard. * Enable to init the Probe Z-Offset when starting the Wizard.
// Use a height slightly above the estimated nozzle-to-probe Z offset. * Use a height slightly above the estimated nozzle-to-probe Z offset.
// For example, with an offset of -5, consider a starting height of -4. * For example, with an offset of -5, consider a starting height of -4.
// */
//#define PROBE_OFFSET_WIZARD_START_Z -4.0 #define XATC_START_Z 0.0
#define XATC_MAX_POINTS 3 // Number of points to probe in the wizard
// Set a convenient position to do the calibration (probing point and nozzle/bed-distance) #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe
//#define PROBE_OFFSET_WIZARD_XY_POS { X_CENTER, Y_CENTER }
#endif
#if ENABLED(AUTO_BED_LEVELING_BILINEAR)
// Add a calibration procedure in the Probe Offsets menu
// to compensate for twist in the X-axis.
//#define X_AXIS_TWIST_COMPENSATION
#if ENABLED(X_AXIS_TWIST_COMPENSATION)
/**
* Enable to init the Probe Z-Offset when starting the Wizard.
* Use a height slightly above the estimated nozzle-to-probe Z offset.
* For example, with an offset of -5, consider a starting height of -4.
*/
#define XATC_START_Z 0.0
#define XATC_MAX_POINTS 3 // Number of points to probe in the wizard
#define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe
#endif
#endif #endif
#endif #endif

56
config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h
View file

@ -1280,37 +1280,35 @@
#define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440
#endif #endif
#if HAS_BED_PROBE && EITHER(HAS_MARLINUI_MENU, HAS_TFT_LVGL_UI)
//#define PROBE_OFFSET_WIZARD // Add a Probe Z Offset calibration option to the LCD menu
#if ENABLED(PROBE_OFFSET_WIZARD)
/**
* Enable to init the Probe Z-Offset when starting the Wizard.
* Use a height slightly above the estimated nozzle-to-probe Z offset.
* For example, with an offset of -5, consider a starting height of -4.
*/
//#define PROBE_OFFSET_WIZARD_START_Z -4.0
// Set a convenient position to do the calibration (probing point and nozzle/bed-distance)
//#define PROBE_OFFSET_WIZARD_XY_POS { X_CENTER, Y_CENTER }
#endif
#endif
#if HAS_MARLINUI_MENU #if HAS_MARLINUI_MENU
// Add Probe Z Offset calibration to the Z Probe Offsets menu #if BOTH(HAS_BED_PROBE, AUTO_BED_LEVELING_BILINEAR)
#if HAS_BED_PROBE // Add calibration in the Probe Offsets menu to compensate for X-axis twist.
//#define PROBE_OFFSET_WIZARD //#define X_AXIS_TWIST_COMPENSATION
#if ENABLED(PROBE_OFFSET_WIZARD) #if ENABLED(X_AXIS_TWIST_COMPENSATION)
// /**
// Enable to init the Probe Z-Offset when starting the Wizard. * Enable to init the Probe Z-Offset when starting the Wizard.
// Use a height slightly above the estimated nozzle-to-probe Z offset. * Use a height slightly above the estimated nozzle-to-probe Z offset.
// For example, with an offset of -5, consider a starting height of -4. * For example, with an offset of -5, consider a starting height of -4.
// */
//#define PROBE_OFFSET_WIZARD_START_Z -4.0 #define XATC_START_Z 0.0
#define XATC_MAX_POINTS 3 // Number of points to probe in the wizard
// Set a convenient position to do the calibration (probing point and nozzle/bed-distance) #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe
//#define PROBE_OFFSET_WIZARD_XY_POS { X_CENTER, Y_CENTER }
#endif
#if ENABLED(AUTO_BED_LEVELING_BILINEAR)
// Add a calibration procedure in the Probe Offsets menu
// to compensate for twist in the X-axis.
//#define X_AXIS_TWIST_COMPENSATION
#if ENABLED(X_AXIS_TWIST_COMPENSATION)
/**
* Enable to init the Probe Z-Offset when starting the Wizard.
* Use a height slightly above the estimated nozzle-to-probe Z offset.
* For example, with an offset of -5, consider a starting height of -4.
*/
#define XATC_START_Z 0.0
#define XATC_MAX_POINTS 3 // Number of points to probe in the wizard
#define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe
#endif
#endif #endif
#endif #endif

56
config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h
View file

@ -1280,37 +1280,35 @@
#define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440
#endif #endif
#if HAS_BED_PROBE && EITHER(HAS_MARLINUI_MENU, HAS_TFT_LVGL_UI)
//#define PROBE_OFFSET_WIZARD // Add a Probe Z Offset calibration option to the LCD menu
#if ENABLED(PROBE_OFFSET_WIZARD)
/**
* Enable to init the Probe Z-Offset when starting the Wizard.
* Use a height slightly above the estimated nozzle-to-probe Z offset.
* For example, with an offset of -5, consider a starting height of -4.
*/
//#define PROBE_OFFSET_WIZARD_START_Z -4.0
// Set a convenient position to do the calibration (probing point and nozzle/bed-distance)
//#define PROBE_OFFSET_WIZARD_XY_POS { X_CENTER, Y_CENTER }
#endif
#endif
#if HAS_MARLINUI_MENU #if HAS_MARLINUI_MENU
// Add Probe Z Offset calibration to the Z Probe Offsets menu #if BOTH(HAS_BED_PROBE, AUTO_BED_LEVELING_BILINEAR)
#if HAS_BED_PROBE // Add calibration in the Probe Offsets menu to compensate for X-axis twist.
//#define PROBE_OFFSET_WIZARD //#define X_AXIS_TWIST_COMPENSATION
#if ENABLED(PROBE_OFFSET_WIZARD) #if ENABLED(X_AXIS_TWIST_COMPENSATION)
// /**
// Enable to init the Probe Z-Offset when starting the Wizard. * Enable to init the Probe Z-Offset when starting the Wizard.
// Use a height slightly above the estimated nozzle-to-probe Z offset. * Use a height slightly above the estimated nozzle-to-probe Z offset.
// For example, with an offset of -5, consider a starting height of -4. * For example, with an offset of -5, consider a starting height of -4.
// */
//#define PROBE_OFFSET_WIZARD_START_Z -4.0 #define XATC_START_Z 0.0
#define XATC_MAX_POINTS 3 // Number of points to probe in the wizard
// Set a convenient position to do the calibration (probing point and nozzle/bed-distance) #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe
//#define PROBE_OFFSET_WIZARD_XY_POS { X_CENTER, Y_CENTER }
#endif
#if ENABLED(AUTO_BED_LEVELING_BILINEAR)
// Add a calibration procedure in the Probe Offsets menu
// to compensate for twist in the X-axis.
//#define X_AXIS_TWIST_COMPENSATION
#if ENABLED(X_AXIS_TWIST_COMPENSATION)
/**
* Enable to init the Probe Z-Offset when starting the Wizard.
* Use a height slightly above the estimated nozzle-to-probe Z offset.
* For example, with an offset of -5, consider a starting height of -4.
*/
#define XATC_START_Z 0.0
#define XATC_MAX_POINTS 3 // Number of points to probe in the wizard
#define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe
#endif
#endif #endif
#endif #endif

56
config/examples/Creality/Ender-3 Pro/CrealityV1/Configuration_adv.h
View file

@ -1280,37 +1280,35 @@
#define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440
#endif #endif
#if HAS_BED_PROBE && EITHER(HAS_MARLINUI_MENU, HAS_TFT_LVGL_UI)
//#define PROBE_OFFSET_WIZARD // Add a Probe Z Offset calibration option to the LCD menu
#if ENABLED(PROBE_OFFSET_WIZARD)
/**
* Enable to init the Probe Z-Offset when starting the Wizard.
* Use a height slightly above the estimated nozzle-to-probe Z offset.
* For example, with an offset of -5, consider a starting height of -4.
*/
//#define PROBE_OFFSET_WIZARD_START_Z -4.0
// Set a convenient position to do the calibration (probing point and nozzle/bed-distance)
//#define PROBE_OFFSET_WIZARD_XY_POS { X_CENTER, Y_CENTER }
#endif
#endif
#if HAS_MARLINUI_MENU #if HAS_MARLINUI_MENU
// Add Probe Z Offset calibration to the Z Probe Offsets menu #if BOTH(HAS_BED_PROBE, AUTO_BED_LEVELING_BILINEAR)
#if HAS_BED_PROBE // Add calibration in the Probe Offsets menu to compensate for X-axis twist.
//#define PROBE_OFFSET_WIZARD //#define X_AXIS_TWIST_COMPENSATION
#if ENABLED(PROBE_OFFSET_WIZARD) #if ENABLED(X_AXIS_TWIST_COMPENSATION)
// /**
// Enable to init the Probe Z-Offset when starting the Wizard. * Enable to init the Probe Z-Offset when starting the Wizard.
// Use a height slightly above the estimated nozzle-to-probe Z offset. * Use a height slightly above the estimated nozzle-to-probe Z offset.
// For example, with an offset of -5, consider a starting height of -4. * For example, with an offset of -5, consider a starting height of -4.
// */
//#define PROBE_OFFSET_WIZARD_START_Z -4.0 #define XATC_START_Z 0.0
#define XATC_MAX_POINTS 3 // Number of points to probe in the wizard
// Set a convenient position to do the calibration (probing point and nozzle/bed-distance) #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe
//#define PROBE_OFFSET_WIZARD_XY_POS { X_CENTER, Y_CENTER }
#endif
#if ENABLED(AUTO_BED_LEVELING_BILINEAR)
// Add a calibration procedure in the Probe Offsets menu
// to compensate for twist in the X-axis.
//#define X_AXIS_TWIST_COMPENSATION
#if ENABLED(X_AXIS_TWIST_COMPENSATION)
/**
* Enable to init the Probe Z-Offset when starting the Wizard.
* Use a height slightly above the estimated nozzle-to-probe Z offset.
* For example, with an offset of -5, consider a starting height of -4.
*/
#define XATC_START_Z 0.0
#define XATC_MAX_POINTS 3 // Number of points to probe in the wizard
#define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe
#endif
#endif #endif
#endif #endif

56
config/examples/Creality/Ender-3 Pro/CrealityV422/Configuration_adv.h
View file

@ -1281,37 +1281,35 @@
#define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440
#endif #endif
#if HAS_BED_PROBE && EITHER(HAS_MARLINUI_MENU, HAS_TFT_LVGL_UI)
//#define PROBE_OFFSET_WIZARD // Add a Probe Z Offset calibration option to the LCD menu
#if ENABLED(PROBE_OFFSET_WIZARD)
/**
* Enable to init the Probe Z-Offset when starting the Wizard.
* Use a height slightly above the estimated nozzle-to-probe Z offset.
* For example, with an offset of -5, consider a starting height of -4.
*/
//#define PROBE_OFFSET_WIZARD_START_Z -4.0
// Set a convenient position to do the calibration (probing point and nozzle/bed-distance)
//#define PROBE_OFFSET_WIZARD_XY_POS { X_CENTER, Y_CENTER }
#endif
#endif
#if HAS_MARLINUI_MENU #if HAS_MARLINUI_MENU
// Add Probe Z Offset calibration to the Z Probe Offsets menu #if BOTH(HAS_BED_PROBE, AUTO_BED_LEVELING_BILINEAR)
#if HAS_BED_PROBE // Add calibration in the Probe Offsets menu to compensate for X-axis twist.
//#define PROBE_OFFSET_WIZARD //#define X_AXIS_TWIST_COMPENSATION
#if ENABLED(PROBE_OFFSET_WIZARD) #if ENABLED(X_AXIS_TWIST_COMPENSATION)
// /**
// Enable to init the Probe Z-Offset when starting the Wizard. * Enable to init the Probe Z-Offset when starting the Wizard.
// Use a height slightly above the estimated nozzle-to-probe Z offset. * Use a height slightly above the estimated nozzle-to-probe Z offset.
// For example, with an offset of -5, consider a starting height of -4. * For example, with an offset of -5, consider a starting height of -4.
// */
//#define PROBE_OFFSET_WIZARD_START_Z -4.0 #define XATC_START_Z 0.0
#define XATC_MAX_POINTS 3 // Number of points to probe in the wizard
// Set a convenient position to do the calibration (probing point and nozzle/bed-distance) #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe
//#define PROBE_OFFSET_WIZARD_XY_POS { X_CENTER, Y_CENTER }
#endif
#if ENABLED(AUTO_BED_LEVELING_BILINEAR)
// Add a calibration procedure in the Probe Offsets menu
// to compensate for twist in the X-axis.
//#define X_AXIS_TWIST_COMPENSATION
#if ENABLED(X_AXIS_TWIST_COMPENSATION)
/**
* Enable to init the Probe Z-Offset when starting the Wizard.
* Use a height slightly above the estimated nozzle-to-probe Z offset.
* For example, with an offset of -5, consider a starting height of -4.
*/
#define XATC_START_Z 0.0
#define XATC_MAX_POINTS 3 // Number of points to probe in the wizard
#define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe
#endif
#endif #endif
#endif #endif

56
config/examples/Creality/Ender-3 Pro/CrealityV427/Configuration_adv.h
View file

@ -1280,37 +1280,35 @@
#define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440
#endif #endif
#if HAS_BED_PROBE && EITHER(HAS_MARLINUI_MENU, HAS_TFT_LVGL_UI)
//#define PROBE_OFFSET_WIZARD // Add a Probe Z Offset calibration option to the LCD menu
#if ENABLED(PROBE_OFFSET_WIZARD)
/**
* Enable to init the Probe Z-Offset when starting the Wizard.
* Use a height slightly above the estimated nozzle-to-probe Z offset.
* For example, with an offset of -5, consider a starting height of -4.
*/
//#define PROBE_OFFSET_WIZARD_START_Z -4.0
// Set a convenient position to do the calibration (probing point and nozzle/bed-distance)
//#define PROBE_OFFSET_WIZARD_XY_POS { X_CENTER, Y_CENTER }
#endif
#endif
#if HAS_MARLINUI_MENU #if HAS_MARLINUI_MENU
// Add Probe Z Offset calibration to the Z Probe Offsets menu #if BOTH(HAS_BED_PROBE, AUTO_BED_LEVELING_BILINEAR)
#if HAS_BED_PROBE // Add calibration in the Probe Offsets menu to compensate for X-axis twist.
//#define PROBE_OFFSET_WIZARD //#define X_AXIS_TWIST_COMPENSATION
#if ENABLED(PROBE_OFFSET_WIZARD) #if ENABLED(X_AXIS_TWIST_COMPENSATION)
// /**
// Enable to init the Probe Z-Offset when starting the Wizard. * Enable to init the Probe Z-Offset when starting the Wizard.
// Use a height slightly above the estimated nozzle-to-probe Z offset. * Use a height slightly above the estimated nozzle-to-probe Z offset.
// For example, with an offset of -5, consider a starting height of -4. * For example, with an offset of -5, consider a starting height of -4.
// */
//#define PROBE_OFFSET_WIZARD_START_Z -4.0 #define XATC_START_Z 0.0
#define XATC_MAX_POINTS 3 // Number of points to probe in the wizard
// Set a convenient position to do the calibration (probing point and nozzle/bed-distance) #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe
//#define PROBE_OFFSET_WIZARD_XY_POS { X_CENTER, Y_CENTER }
#endif
#if ENABLED(AUTO_BED_LEVELING_BILINEAR)
// Add a calibration procedure in the Probe Offsets menu
// to compensate for twist in the X-axis.
//#define X_AXIS_TWIST_COMPENSATION
#if ENABLED(X_AXIS_TWIST_COMPENSATION)
/**
* Enable to init the Probe Z-Offset when starting the Wizard.
* Use a height slightly above the estimated nozzle-to-probe Z offset.
* For example, with an offset of -5, consider a starting height of -4.
*/
#define XATC_START_Z 0.0
#define XATC_MAX_POINTS 3 // Number of points to probe in the wizard
#define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe
#endif
#endif #endif
#endif #endif

56
config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/CrealityUI/Configuration_adv.h
View file

@ -1281,37 +1281,35 @@
#define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440
#endif #endif
#if HAS_BED_PROBE && EITHER(HAS_MARLINUI_MENU, HAS_TFT_LVGL_UI)
//#define PROBE_OFFSET_WIZARD // Add a Probe Z Offset calibration option to the LCD menu
#if ENABLED(PROBE_OFFSET_WIZARD)
/**
* Enable to init the Probe Z-Offset when starting the Wizard.
* Use a height slightly above the estimated nozzle-to-probe Z offset.
* For example, with an offset of -5, consider a starting height of -4.
*/
//#define PROBE_OFFSET_WIZARD_START_Z -4.0
// Set a convenient position to do the calibration (probing point and nozzle/bed-distance)
//#define PROBE_OFFSET_WIZARD_XY_POS { X_CENTER, Y_CENTER }
#endif
#endif
#if HAS_MARLINUI_MENU #if HAS_MARLINUI_MENU
// Add Probe Z Offset calibration to the Z Probe Offsets menu #if BOTH(HAS_BED_PROBE, AUTO_BED_LEVELING_BILINEAR)
#if HAS_BED_PROBE // Add calibration in the Probe Offsets menu to compensate for X-axis twist.
//#define PROBE_OFFSET_WIZARD //#define X_AXIS_TWIST_COMPENSATION
#if ENABLED(PROBE_OFFSET_WIZARD) #if ENABLED(X_AXIS_TWIST_COMPENSATION)
// /**
// Enable to init the Probe Z-Offset when starting the Wizard. * Enable to init the Probe Z-Offset when starting the Wizard.
// Use a height slightly above the estimated nozzle-to-probe Z offset. * Use a height slightly above the estimated nozzle-to-probe Z offset.
// For example, with an offset of -5, consider a starting height of -4. * For example, with an offset of -5, consider a starting height of -4.
// */
//#define PROBE_OFFSET_WIZARD_START_Z -4.0 #define XATC_START_Z 0.0
#define XATC_MAX_POINTS 3 // Number of points to probe in the wizard
// Set a convenient position to do the calibration (probing point and nozzle/bed-distance) #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe
//#define PROBE_OFFSET_WIZARD_XY_POS { X_CENTER, Y_CENTER }
#endif
#if ENABLED(AUTO_BED_LEVELING_BILINEAR)
// Add a calibration procedure in the Probe Offsets menu
// to compensate for twist in the X-axis.
//#define X_AXIS_TWIST_COMPENSATION
#if ENABLED(X_AXIS_TWIST_COMPENSATION)
/**
* Enable to init the Probe Z-Offset when starting the Wizard.
* Use a height slightly above the estimated nozzle-to-probe Z offset.
* For example, with an offset of -5, consider a starting height of -4.
*/
#define XATC_START_Z 0.0
#define XATC_MAX_POINTS 3 // Number of points to probe in the wizard
#define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe
#endif
#endif #endif
#endif #endif

56
config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/MarlinUI/Configuration_adv.h
View file

@ -1281,37 +1281,35 @@
#define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440
#endif #endif
#if HAS_BED_PROBE && EITHER(HAS_MARLINUI_MENU, HAS_TFT_LVGL_UI)
//#define PROBE_OFFSET_WIZARD // Add a Probe Z Offset calibration option to the LCD menu
#if ENABLED(PROBE_OFFSET_WIZARD)
/**
* Enable to init the Probe Z-Offset when starting the Wizard.
* Use a height slightly above the estimated nozzle-to-probe Z offset.
* For example, with an offset of -5, consider a starting height of -4.
*/
//#define PROBE_OFFSET_WIZARD_START_Z -4.0
// Set a convenient position to do the calibration (probing point and nozzle/bed-distance)
//#define PROBE_OFFSET_WIZARD_XY_POS { X_CENTER, Y_CENTER }
#endif
#endif
#if HAS_MARLINUI_MENU #if HAS_MARLINUI_MENU
// Add Probe Z Offset calibration to the Z Probe Offsets menu #if BOTH(HAS_BED_PROBE, AUTO_BED_LEVELING_BILINEAR)
#if HAS_BED_PROBE // Add calibration in the Probe Offsets menu to compensate for X-axis twist.
//#define PROBE_OFFSET_WIZARD //#define X_AXIS_TWIST_COMPENSATION
#if ENABLED(PROBE_OFFSET_WIZARD) #if ENABLED(X_AXIS_TWIST_COMPENSATION)
// /**
// Enable to init the Probe Z-Offset when starting the Wizard. * Enable to init the Probe Z-Offset when starting the Wizard.
// Use a height slightly above the estimated nozzle-to-probe Z offset. * Use a height slightly above the estimated nozzle-to-probe Z offset.
// For example, with an offset of -5, consider a starting height of -4. * For example, with an offset of -5, consider a starting height of -4.
// */
//#define PROBE_OFFSET_WIZARD_START_Z -4.0 #define XATC_START_Z 0.0
#define XATC_MAX_POINTS 3 // Number of points to probe in the wizard
// Set a convenient position to do the calibration (probing point and nozzle/bed-distance) #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe
//#define PROBE_OFFSET_WIZARD_XY_POS { X_CENTER, Y_CENTER }
#endif
#if ENABLED(AUTO_BED_LEVELING_BILINEAR)
// Add a calibration procedure in the Probe Offsets menu
// to compensate for twist in the X-axis.
//#define X_AXIS_TWIST_COMPENSATION
#if ENABLED(X_AXIS_TWIST_COMPENSATION)
/**
* Enable to init the Probe Z-Offset when starting the Wizard.
* Use a height slightly above the estimated nozzle-to-probe Z offset.
* For example, with an offset of -5, consider a starting height of -4.
*/
#define XATC_START_Z 0.0
#define XATC_MAX_POINTS 3 // Number of points to probe in the wizard
#define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe
#endif
#endif #endif
#endif #endif

56
config/examples/Creality/Ender-3 V2/CrealityV422/CrealityUI/Configuration_adv.h
View file

@ -1281,37 +1281,35 @@
#define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440
#endif #endif
#if HAS_BED_PROBE && EITHER(HAS_MARLINUI_MENU, HAS_TFT_LVGL_UI)
//#define PROBE_OFFSET_WIZARD // Add a Probe Z Offset calibration option to the LCD menu
#if ENABLED(PROBE_OFFSET_WIZARD)
/**
* Enable to init the Probe Z-Offset when starting the Wizard.
* Use a height slightly above the estimated nozzle-to-probe Z offset.
* For example, with an offset of -5, consider a starting height of -4.
*/
//#define PROBE_OFFSET_WIZARD_START_Z -4.0
// Set a convenient position to do the calibration (probing point and nozzle/bed-distance)
//#define PROBE_OFFSET_WIZARD_XY_POS { X_CENTER, Y_CENTER }
#endif
#endif
#if HAS_MARLINUI_MENU #if HAS_MARLINUI_MENU
// Add Probe Z Offset calibration to the Z Probe Offsets menu #if BOTH(HAS_BED_PROBE, AUTO_BED_LEVELING_BILINEAR)
#if HAS_BED_PROBE // Add calibration in the Probe Offsets menu to compensate for X-axis twist.
//#define PROBE_OFFSET_WIZARD //#define X_AXIS_TWIST_COMPENSATION
#if ENABLED(PROBE_OFFSET_WIZARD) #if ENABLED(X_AXIS_TWIST_COMPENSATION)
// /**
// Enable to init the Probe Z-Offset when starting the Wizard. * Enable to init the Probe Z-Offset when starting the Wizard.
// Use a height slightly above the estimated nozzle-to-probe Z offset. * Use a height slightly above the estimated nozzle-to-probe Z offset.
// For example, with an offset of -5, consider a starting height of -4. * For example, with an offset of -5, consider a starting height of -4.
// */
//#define PROBE_OFFSET_WIZARD_START_Z -4.0 #define XATC_START_Z 0.0
#define XATC_MAX_POINTS 3 // Number of points to probe in the wizard
// Set a convenient position to do the calibration (probing point and nozzle/bed-distance) #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe
//#define PROBE_OFFSET_WIZARD_XY_POS { X_CENTER, Y_CENTER }
#endif
#if ENABLED(AUTO_BED_LEVELING_BILINEAR)
// Add a calibration procedure in the Probe Offsets menu
// to compensate for twist in the X-axis.
//#define X_AXIS_TWIST_COMPENSATION
#if ENABLED(X_AXIS_TWIST_COMPENSATION)
/**
* Enable to init the Probe Z-Offset when starting the Wizard.
* Use a height slightly above the estimated nozzle-to-probe Z offset.
* For example, with an offset of -5, consider a starting height of -4.
*/
#define XATC_START_Z 0.0
#define XATC_MAX_POINTS 3 // Number of points to probe in the wizard
#define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe
#endif
#endif #endif
#endif #endif

56
config/examples/Creality/Ender-3 V2/CrealityV422/MarlinUI/Configuration_adv.h
View file

@ -1281,37 +1281,35 @@
#define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440
#endif #endif
#if HAS_BED_PROBE && EITHER(HAS_MARLINUI_MENU, HAS_TFT_LVGL_UI)
//#define PROBE_OFFSET_WIZARD // Add a Probe Z Offset calibration option to the LCD menu
#if ENABLED(PROBE_OFFSET_WIZARD)
/**
* Enable to init the Probe Z-Offset when starting the Wizard.
* Use a height slightly above the estimated nozzle-to-probe Z offset.
* For example, with an offset of -5, consider a starting height of -4.
*/
//#define PROBE_OFFSET_WIZARD_START_Z -4.0
// Set a convenient position to do the calibration (probing point and nozzle/bed-distance)
//#define PROBE_OFFSET_WIZARD_XY_POS { X_CENTER, Y_CENTER }
#endif
#endif
#if HAS_MARLINUI_MENU #if HAS_MARLINUI_MENU
// Add Probe Z Offset calibration to the Z Probe Offsets menu #if BOTH(HAS_BED_PROBE, AUTO_BED_LEVELING_BILINEAR)
#if HAS_BED_PROBE // Add calibration in the Probe Offsets menu to compensate for X-axis twist.
//#define PROBE_OFFSET_WIZARD //#define X_AXIS_TWIST_COMPENSATION
#if ENABLED(PROBE_OFFSET_WIZARD) #if ENABLED(X_AXIS_TWIST_COMPENSATION)
// /**
// Enable to init the Probe Z-Offset when starting the Wizard. * Enable to init the Probe Z-Offset when starting the Wizard.
// Use a height slightly above the estimated nozzle-to-probe Z offset. * Use a height slightly above the estimated nozzle-to-probe Z offset.
// For example, with an offset of -5, consider a starting height of -4. * For example, with an offset of -5, consider a starting height of -4.
// */
//#define PROBE_OFFSET_WIZARD_START_Z -4.0 #define XATC_START_Z 0.0
#define XATC_MAX_POINTS 3 // Number of points to probe in the wizard
// Set a convenient position to do the calibration (probing point and nozzle/bed-distance) #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe
//#define PROBE_OFFSET_WIZARD_XY_POS { X_CENTER, Y_CENTER }
#endif
#if ENABLED(AUTO_BED_LEVELING_BILINEAR)
// Add a calibration procedure in the Probe Offsets menu
// to compensate for twist in the X-axis.
//#define X_AXIS_TWIST_COMPENSATION
#if ENABLED(X_AXIS_TWIST_COMPENSATION)
/**
* Enable to init the Probe Z-Offset when starting the Wizard.
* Use a height slightly above the estimated nozzle-to-probe Z offset.
* For example, with an offset of -5, consider a starting height of -4.
*/
#define XATC_START_Z 0.0
#define XATC_MAX_POINTS 3 // Number of points to probe in the wizard
#define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe
#endif
#endif #endif
#endif #endif

56
config/examples/Creality/Ender-3/BigTreeTech E3 RRF/Configuration_adv.h
View file

@ -1280,37 +1280,35 @@
#define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440
#endif #endif
#if HAS_BED_PROBE && EITHER(HAS_MARLINUI_MENU, HAS_TFT_LVGL_UI)
//#define PROBE_OFFSET_WIZARD // Add a Probe Z Offset calibration option to the LCD menu
#if ENABLED(PROBE_OFFSET_WIZARD)
/**
* Enable to init the Probe Z-Offset when starting the Wizard.
* Use a height slightly above the estimated nozzle-to-probe Z offset.
* For example, with an offset of -5, consider a starting height of -4.
*/
//#define PROBE_OFFSET_WIZARD_START_Z -4.0
// Set a convenient position to do the calibration (probing point and nozzle/bed-distance)
//#define PROBE_OFFSET_WIZARD_XY_POS { X_CENTER, Y_CENTER }
#endif
#endif
#if HAS_MARLINUI_MENU #if HAS_MARLINUI_MENU
// Add Probe Z Offset calibration to the Z Probe Offsets menu #if BOTH(HAS_BED_PROBE, AUTO_BED_LEVELING_BILINEAR)
#if HAS_BED_PROBE // Add calibration in the Probe Offsets menu to compensate for X-axis twist.
//#define PROBE_OFFSET_WIZARD //#define X_AXIS_TWIST_COMPENSATION
#if ENABLED(PROBE_OFFSET_WIZARD) #if ENABLED(X_AXIS_TWIST_COMPENSATION)
// /**
// Enable to init the Probe Z-Offset when starting the Wizard. * Enable to init the Probe Z-Offset when starting the Wizard.
// Use a height slightly above the estimated nozzle-to-probe Z offset. * Use a height slightly above the estimated nozzle-to-probe Z offset.
// For example, with an offset of -5, consider a starting height of -4. * For example, with an offset of -5, consider a starting height of -4.
// */
//#define PROBE_OFFSET_WIZARD_START_Z -4.0 #define XATC_START_Z 0.0
#define XATC_MAX_POINTS 3 // Number of points to probe in the wizard
// Set a convenient position to do the calibration (probing point and nozzle/bed-distance) #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe
//#define PROBE_OFFSET_WIZARD_XY_POS { X_CENTER, Y_CENTER }
#endif
#if ENABLED(AUTO_BED_LEVELING_BILINEAR)
// Add a calibration procedure in the Probe Offsets menu
// to compensate for twist in the X-axis.
//#define X_AXIS_TWIST_COMPENSATION
#if ENABLED(X_AXIS_TWIST_COMPENSATION)
/**
* Enable to init the Probe Z-Offset when starting the Wizard.
* Use a height slightly above the estimated nozzle-to-probe Z offset.
* For example, with an offset of -5, consider a starting height of -4.
*/
#define XATC_START_Z 0.0
#define XATC_MAX_POINTS 3 // Number of points to probe in the wizard
#define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe
#endif
#endif #endif
#endif #endif

56
config/examples/Creality/Ender-3/BigTreeTech SKR 1.4/Configuration_adv.h
View file

@ -1280,37 +1280,35 @@
#define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440
#endif #endif
#if HAS_BED_PROBE && EITHER(HAS_MARLINUI_MENU, HAS_TFT_LVGL_UI)
//#define PROBE_OFFSET_WIZARD // Add a Probe Z Offset calibration option to the LCD menu
#if ENABLED(PROBE_OFFSET_WIZARD)
/**
* Enable to init the Probe Z-Offset when starting the Wizard.
* Use a height slightly above the estimated nozzle-to-probe Z offset.
* For example, with an offset of -5, consider a starting height of -4.
*/
//#define PROBE_OFFSET_WIZARD_START_Z -4.0
// Set a convenient position to do the calibration (probing point and nozzle/bed-distance)
//#define PROBE_OFFSET_WIZARD_XY_POS { X_CENTER, Y_CENTER }
#endif
#endif
#if HAS_MARLINUI_MENU #if HAS_MARLINUI_MENU
// Add Probe Z Offset calibration to the Z Probe Offsets menu #if BOTH(HAS_BED_PROBE, AUTO_BED_LEVELING_BILINEAR)
#if HAS_BED_PROBE // Add calibration in the Probe Offsets menu to compensate for X-axis twist.
//#define PROBE_OFFSET_WIZARD //#define X_AXIS_TWIST_COMPENSATION
#if ENABLED(PROBE_OFFSET_WIZARD) #if ENABLED(X_AXIS_TWIST_COMPENSATION)
// /**
// Enable to init the Probe Z-Offset when starting the Wizard. * Enable to init the Probe Z-Offset when starting the Wizard.
// Use a height slightly above the estimated nozzle-to-probe Z offset. * Use a height slightly above the estimated nozzle-to-probe Z offset.
// For example, with an offset of -5, consider a starting height of -4. * For example, with an offset of -5, consider a starting height of -4.
// */
//#define PROBE_OFFSET_WIZARD_START_Z -4.0 #define XATC_START_Z 0.0
#define XATC_MAX_POINTS 3 // Number of points to probe in the wizard
// Set a convenient position to do the calibration (probing point and nozzle/bed-distance) #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe
//#define PROBE_OFFSET_WIZARD_XY_POS { X_CENTER, Y_CENTER }
#endif
#if ENABLED(AUTO_BED_LEVELING_BILINEAR)
// Add a calibration procedure in the Probe Offsets menu
// to compensate for twist in the X-axis.
//#define X_AXIS_TWIST_COMPENSATION
#if ENABLED(X_AXIS_TWIST_COMPENSATION)
/**
* Enable to init the Probe Z-Offset when starting the Wizard.
* Use a height slightly above the estimated nozzle-to-probe Z offset.
* For example, with an offset of -5, consider a starting height of -4.
*/
#define XATC_START_Z 0.0
#define XATC_MAX_POINTS 3 // Number of points to probe in the wizard
#define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe
#endif
#endif #endif
#endif #endif

56
config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/2-into-1 Hotend/Configuration_adv.h
View file

@ -1280,37 +1280,35 @@
#define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440
#endif #endif
#if HAS_BED_PROBE && EITHER(HAS_MARLINUI_MENU, HAS_TFT_LVGL_UI)
//#define PROBE_OFFSET_WIZARD // Add a Probe Z Offset calibration option to the LCD menu
#if ENABLED(PROBE_OFFSET_WIZARD)
/**
* Enable to init the Probe Z-Offset when starting the Wizard.
* Use a height slightly above the estimated nozzle-to-probe Z offset.
* For example, with an offset of -5, consider a starting height of -4.
*/
//#define PROBE_OFFSET_WIZARD_START_Z -4.0
// Set a convenient position to do the calibration (probing point and nozzle/bed-distance)
//#define PROBE_OFFSET_WIZARD_XY_POS { X_CENTER, Y_CENTER }
#endif
#endif
#if HAS_MARLINUI_MENU #if HAS_MARLINUI_MENU
// Add Probe Z Offset calibration to the Z Probe Offsets menu #if BOTH(HAS_BED_PROBE, AUTO_BED_LEVELING_BILINEAR)
#if HAS_BED_PROBE // Add calibration in the Probe Offsets menu to compensate for X-axis twist.
//#define PROBE_OFFSET_WIZARD //#define X_AXIS_TWIST_COMPENSATION
#if ENABLED(PROBE_OFFSET_WIZARD) #if ENABLED(X_AXIS_TWIST_COMPENSATION)
// /**
// Enable to init the Probe Z-Offset when starting the Wizard. * Enable to init the Probe Z-Offset when starting the Wizard.
// Use a height slightly above the estimated nozzle-to-probe Z offset. * Use a height slightly above the estimated nozzle-to-probe Z offset.
// For example, with an offset of -5, consider a starting height of -4. * For example, with an offset of -5, consider a starting height of -4.
// */
//#define PROBE_OFFSET_WIZARD_START_Z -4.0 #define XATC_START_Z 0.0
#define XATC_MAX_POINTS 3 // Number of points to probe in the wizard
// Set a convenient position to do the calibration (probing point and nozzle/bed-distance) #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe
//#define PROBE_OFFSET_WIZARD_XY_POS { X_CENTER, Y_CENTER }
#endif
#if ENABLED(AUTO_BED_LEVELING_BILINEAR)
// Add a calibration procedure in the Probe Offsets menu
// to compensate for twist in the X-axis.
//#define X_AXIS_TWIST_COMPENSATION
#if ENABLED(X_AXIS_TWIST_COMPENSATION)
/**
* Enable to init the Probe Z-Offset when starting the Wizard.
* Use a height slightly above the estimated nozzle-to-probe Z offset.
* For example, with an offset of -5, consider a starting height of -4.
*/
#define XATC_START_Z 0.0
#define XATC_MAX_POINTS 3 // Number of points to probe in the wizard
#define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe
#endif
#endif #endif
#endif #endif

56
config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Dual Z/Configuration_adv.h
View file

@ -1280,37 +1280,35 @@
#define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440
#endif #endif
#if HAS_BED_PROBE && EITHER(HAS_MARLINUI_MENU, HAS_TFT_LVGL_UI)
//#define PROBE_OFFSET_WIZARD // Add a Probe Z Offset calibration option to the LCD menu
#if ENABLED(PROBE_OFFSET_WIZARD)
/**
* Enable to init the Probe Z-Offset when starting the Wizard.
* Use a height slightly above the estimated nozzle-to-probe Z offset.
* For example, with an offset of -5, consider a starting height of -4.
*/
//#define PROBE_OFFSET_WIZARD_START_Z -4.0
// Set a convenient position to do the calibration (probing point and nozzle/bed-distance)
//#define PROBE_OFFSET_WIZARD_XY_POS { X_CENTER, Y_CENTER }
#endif
#endif
#if HAS_MARLINUI_MENU #if HAS_MARLINUI_MENU
// Add Probe Z Offset calibration to the Z Probe Offsets menu #if BOTH(HAS_BED_PROBE, AUTO_BED_LEVELING_BILINEAR)
#if HAS_BED_PROBE // Add calibration in the Probe Offsets menu to compensate for X-axis twist.
//#define PROBE_OFFSET_WIZARD //#define X_AXIS_TWIST_COMPENSATION
#if ENABLED(PROBE_OFFSET_WIZARD) #if ENABLED(X_AXIS_TWIST_COMPENSATION)
// /**
// Enable to init the Probe Z-Offset when starting the Wizard. * Enable to init the Probe Z-Offset when starting the Wizard.
// Use a height slightly above the estimated nozzle-to-probe Z offset. * Use a height slightly above the estimated nozzle-to-probe Z offset.
// For example, with an offset of -5, consider a starting height of -4. * For example, with an offset of -5, consider a starting height of -4.
// */
//#define PROBE_OFFSET_WIZARD_START_Z -4.0 #define XATC_START_Z 0.0
#define XATC_MAX_POINTS 3 // Number of points to probe in the wizard
// Set a convenient position to do the calibration (probing point and nozzle/bed-distance) #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe
//#define PROBE_OFFSET_WIZARD_XY_POS { X_CENTER, Y_CENTER }
#endif
#if ENABLED(AUTO_BED_LEVELING_BILINEAR)
// Add a calibration procedure in the Probe Offsets menu
// to compensate for twist in the X-axis.
//#define X_AXIS_TWIST_COMPENSATION
#if ENABLED(X_AXIS_TWIST_COMPENSATION)
/**
* Enable to init the Probe Z-Offset when starting the Wizard.
* Use a height slightly above the estimated nozzle-to-probe Z offset.
* For example, with an offset of -5, consider a starting height of -4.
*/
#define XATC_START_Z 0.0
#define XATC_MAX_POINTS 3 // Number of points to probe in the wizard
#define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe
#endif
#endif #endif
#endif #endif

56
config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Single Extruder/Configuration_adv.h
View file

@ -1280,37 +1280,35 @@
#define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440
#endif #endif
#if HAS_BED_PROBE && EITHER(HAS_MARLINUI_MENU, HAS_TFT_LVGL_UI)
//#define PROBE_OFFSET_WIZARD // Add a Probe Z Offset calibration option to the LCD menu
#if ENABLED(PROBE_OFFSET_WIZARD)
/**
* Enable to init the Probe Z-Offset when starting the Wizard.
* Use a height slightly above the estimated nozzle-to-probe Z offset.
* For example, with an offset of -5, consider a starting height of -4.
*/
//#define PROBE_OFFSET_WIZARD_START_Z -4.0
// Set a convenient position to do the calibration (probing point and nozzle/bed-distance)
//#define PROBE_OFFSET_WIZARD_XY_POS { X_CENTER, Y_CENTER }
#endif
#endif
#if HAS_MARLINUI_MENU #if HAS_MARLINUI_MENU
// Add Probe Z Offset calibration to the Z Probe Offsets menu #if BOTH(HAS_BED_PROBE, AUTO_BED_LEVELING_BILINEAR)
#if HAS_BED_PROBE // Add calibration in the Probe Offsets menu to compensate for X-axis twist.
//#define PROBE_OFFSET_WIZARD //#define X_AXIS_TWIST_COMPENSATION
#if ENABLED(PROBE_OFFSET_WIZARD) #if ENABLED(X_AXIS_TWIST_COMPENSATION)
// /**
// Enable to init the Probe Z-Offset when starting the Wizard. * Enable to init the Probe Z-Offset when starting the Wizard.
// Use a height slightly above the estimated nozzle-to-probe Z offset. * Use a height slightly above the estimated nozzle-to-probe Z offset.
// For example, with an offset of -5, consider a starting height of -4. * For example, with an offset of -5, consider a starting height of -4.
// */
//#define PROBE_OFFSET_WIZARD_START_Z -4.0 #define XATC_START_Z 0.0
#define XATC_MAX_POINTS 3 // Number of points to probe in the wizard
// Set a convenient position to do the calibration (probing point and nozzle/bed-distance) #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe
//#define PROBE_OFFSET_WIZARD_XY_POS { X_CENTER, Y_CENTER }
#endif
#if ENABLED(AUTO_BED_LEVELING_BILINEAR)
// Add a calibration procedure in the Probe Offsets menu
// to compensate for twist in the X-axis.
//#define X_AXIS_TWIST_COMPENSATION
#if ENABLED(X_AXIS_TWIST_COMPENSATION)
/**
* Enable to init the Probe Z-Offset when starting the Wizard.
* Use a height slightly above the estimated nozzle-to-probe Z offset.
* For example, with an offset of -5, consider a starting height of -4.
*/
#define XATC_START_Z 0.0
#define XATC_MAX_POINTS 3 // Number of points to probe in the wizard
#define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe
#endif
#endif #endif
#endif #endif

56
config/examples/Creality/Ender-3/BigTreeTech SKR E3-DIP V1.1/Configuration_adv.h
View file

@ -1280,37 +1280,35 @@
#define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440
#endif #endif
#if HAS_BED_PROBE && EITHER(HAS_MARLINUI_MENU, HAS_TFT_LVGL_UI)
//#define PROBE_OFFSET_WIZARD // Add a Probe Z Offset calibration option to the LCD menu
#if ENABLED(PROBE_OFFSET_WIZARD)
/**
* Enable to init the Probe Z-Offset when starting the Wizard.
* Use a height slightly above the estimated nozzle-to-probe Z offset.
* For example, with an offset of -5, consider a starting height of -4.
*/
//#define PROBE_OFFSET_WIZARD_START_Z -4.0
// Set a convenient position to do the calibration (probing point and nozzle/bed-distance)
//#define PROBE_OFFSET_WIZARD_XY_POS { X_CENTER, Y_CENTER }
#endif
#endif
#if HAS_MARLINUI_MENU #if HAS_MARLINUI_MENU
// Add Probe Z Offset calibration to the Z Probe Offsets menu #if BOTH(HAS_BED_PROBE, AUTO_BED_LEVELING_BILINEAR)
#if HAS_BED_PROBE // Add calibration in the Probe Offsets menu to compensate for X-axis twist.
//#define PROBE_OFFSET_WIZARD //#define X_AXIS_TWIST_COMPENSATION
#if ENABLED(PROBE_OFFSET_WIZARD) #if ENABLED(X_AXIS_TWIST_COMPENSATION)
// /**
// Enable to init the Probe Z-Offset when starting the Wizard. * Enable to init the Probe Z-Offset when starting the Wizard.
// Use a height slightly above the estimated nozzle-to-probe Z offset. * Use a height slightly above the estimated nozzle-to-probe Z offset.
// For example, with an offset of -5, consider a starting height of -4. * For example, with an offset of -5, consider a starting height of -4.
// */
//#define PROBE_OFFSET_WIZARD_START_Z -4.0 #define XATC_START_Z 0.0
#define XATC_MAX_POINTS 3 // Number of points to probe in the wizard
// Set a convenient position to do the calibration (probing point and nozzle/bed-distance) #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe
//#define PROBE_OFFSET_WIZARD_XY_POS { X_CENTER, Y_CENTER }
#endif
#if ENABLED(AUTO_BED_LEVELING_BILINEAR)
// Add a calibration procedure in the Probe Offsets menu
// to compensate for twist in the X-axis.
//#define X_AXIS_TWIST_COMPENSATION
#if ENABLED(X_AXIS_TWIST_COMPENSATION)
/**
* Enable to init the Probe Z-Offset when starting the Wizard.
* Use a height slightly above the estimated nozzle-to-probe Z offset.
* For example, with an offset of -5, consider a starting height of -4.
*/
#define XATC_START_Z 0.0
#define XATC_MAX_POINTS 3 // Number of points to probe in the wizard
#define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe
#endif
#endif #endif
#endif #endif

56
config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h
View file

@ -1280,37 +1280,35 @@
#define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440
#endif #endif
#if HAS_BED_PROBE && EITHER(HAS_MARLINUI_MENU, HAS_TFT_LVGL_UI)
//#define PROBE_OFFSET_WIZARD // Add a Probe Z Offset calibration option to the LCD menu
#if ENABLED(PROBE_OFFSET_WIZARD)
/**
* Enable to init the Probe Z-Offset when starting the Wizard.
* Use a height slightly above the estimated nozzle-to-probe Z offset.
* For example, with an offset of -5, consider a starting height of -4.
*/
//#define PROBE_OFFSET_WIZARD_START_Z -4.0
// Set a convenient position to do the calibration (probing point and nozzle/bed-distance)
//#define PROBE_OFFSET_WIZARD_XY_POS { X_CENTER, Y_CENTER }
#endif
#endif
#if HAS_MARLINUI_MENU #if HAS_MARLINUI_MENU
// Add Probe Z Offset calibration to the Z Probe Offsets menu #if BOTH(HAS_BED_PROBE, AUTO_BED_LEVELING_BILINEAR)
#if HAS_BED_PROBE // Add calibration in the Probe Offsets menu to compensate for X-axis twist.
//#define PROBE_OFFSET_WIZARD //#define X_AXIS_TWIST_COMPENSATION
#if ENABLED(PROBE_OFFSET_WIZARD) #if ENABLED(X_AXIS_TWIST_COMPENSATION)
// /**
// Enable to init the Probe Z-Offset when starting the Wizard. * Enable to init the Probe Z-Offset when starting the Wizard.
// Use a height slightly above the estimated nozzle-to-probe Z offset. * Use a height slightly above the estimated nozzle-to-probe Z offset.
// For example, with an offset of -5, consider a starting height of -4. * For example, with an offset of -5, consider a starting height of -4.
// */
//#define PROBE_OFFSET_WIZARD_START_Z -4.0 #define XATC_START_Z 0.0
#define XATC_MAX_POINTS 3 // Number of points to probe in the wizard
// Set a convenient position to do the calibration (probing point and nozzle/bed-distance) #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe
//#define PROBE_OFFSET_WIZARD_XY_POS { X_CENTER, Y_CENTER }
#endif
#if ENABLED(AUTO_BED_LEVELING_BILINEAR)
// Add a calibration procedure in the Probe Offsets menu
// to compensate for twist in the X-axis.
//#define X_AXIS_TWIST_COMPENSATION
#if ENABLED(X_AXIS_TWIST_COMPENSATION)
/**
* Enable to init the Probe Z-Offset when starting the Wizard.
* Use a height slightly above the estimated nozzle-to-probe Z offset.
* For example, with an offset of -5, consider a starting height of -4.
*/
#define XATC_START_Z 0.0
#define XATC_MAX_POINTS 3 // Number of points to probe in the wizard
#define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe
#endif
#endif #endif
#endif #endif

56
config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h
View file

@ -1280,37 +1280,35 @@
#define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440
#endif #endif
#if HAS_BED_PROBE && EITHER(HAS_MARLINUI_MENU, HAS_TFT_LVGL_UI)
//#define PROBE_OFFSET_WIZARD // Add a Probe Z Offset calibration option to the LCD menu
#if ENABLED(PROBE_OFFSET_WIZARD)
/**
* Enable to init the Probe Z-Offset when starting the Wizard.
* Use a height slightly above the estimated nozzle-to-probe Z offset.
* For example, with an offset of -5, consider a starting height of -4.
*/
//#define PROBE_OFFSET_WIZARD_START_Z -4.0
// Set a convenient position to do the calibration (probing point and nozzle/bed-distance)
//#define PROBE_OFFSET_WIZARD_XY_POS { X_CENTER, Y_CENTER }
#endif
#endif
#if HAS_MARLINUI_MENU #if HAS_MARLINUI_MENU
// Add Probe Z Offset calibration to the Z Probe Offsets menu #if BOTH(HAS_BED_PROBE, AUTO_BED_LEVELING_BILINEAR)
#if HAS_BED_PROBE // Add calibration in the Probe Offsets menu to compensate for X-axis twist.
//#define PROBE_OFFSET_WIZARD //#define X_AXIS_TWIST_COMPENSATION
#if ENABLED(PROBE_OFFSET_WIZARD) #if ENABLED(X_AXIS_TWIST_COMPENSATION)
// /**
// Enable to init the Probe Z-Offset when starting the Wizard. * Enable to init the Probe Z-Offset when starting the Wizard.
// Use a height slightly above the estimated nozzle-to-probe Z offset. * Use a height slightly above the estimated nozzle-to-probe Z offset.
// For example, with an offset of -5, consider a starting height of -4. * For example, with an offset of -5, consider a starting height of -4.
// */
//#define PROBE_OFFSET_WIZARD_START_Z -4.0 #define XATC_START_Z 0.0
#define XATC_MAX_POINTS 3 // Number of points to probe in the wizard
// Set a convenient position to do the calibration (probing point and nozzle/bed-distance) #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe
//#define PROBE_OFFSET_WIZARD_XY_POS { X_CENTER, Y_CENTER }
#endif
#if ENABLED(AUTO_BED_LEVELING_BILINEAR)
// Add a calibration procedure in the Probe Offsets menu
// to compensate for twist in the X-axis.
//#define X_AXIS_TWIST_COMPENSATION
#if ENABLED(X_AXIS_TWIST_COMPENSATION)
/**
* Enable to init the Probe Z-Offset when starting the Wizard.
* Use a height slightly above the estimated nozzle-to-probe Z offset.
* For example, with an offset of -5, consider a starting height of -4.
*/
#define XATC_START_Z 0.0
#define XATC_MAX_POINTS 3 // Number of points to probe in the wizard
#define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe
#endif
#endif #endif
#endif #endif

56
config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h
View file

@ -1280,37 +1280,35 @@
#define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440
#endif #endif
#if HAS_BED_PROBE && EITHER(HAS_MARLINUI_MENU, HAS_TFT_LVGL_UI)
//#define PROBE_OFFSET_WIZARD // Add a Probe Z Offset calibration option to the LCD menu
#if ENABLED(PROBE_OFFSET_WIZARD)
/**
* Enable to init the Probe Z-Offset when starting the Wizard.
* Use a height slightly above the estimated nozzle-to-probe Z offset.
* For example, with an offset of -5, consider a starting height of -4.
*/
//#define PROBE_OFFSET_WIZARD_START_Z -4.0
// Set a convenient position to do the calibration (probing point and nozzle/bed-distance)
//#define PROBE_OFFSET_WIZARD_XY_POS { X_CENTER, Y_CENTER }
#endif
#endif
#if HAS_MARLINUI_MENU #if HAS_MARLINUI_MENU
// Add Probe Z Offset calibration to the Z Probe Offsets menu #if BOTH(HAS_BED_PROBE, AUTO_BED_LEVELING_BILINEAR)
#if HAS_BED_PROBE // Add calibration in the Probe Offsets menu to compensate for X-axis twist.
//#define PROBE_OFFSET_WIZARD //#define X_AXIS_TWIST_COMPENSATION
#if ENABLED(PROBE_OFFSET_WIZARD) #if ENABLED(X_AXIS_TWIST_COMPENSATION)
// /**
// Enable to init the Probe Z-Offset when starting the Wizard. * Enable to init the Probe Z-Offset when starting the Wizard.
// Use a height slightly above the estimated nozzle-to-probe Z offset. * Use a height slightly above the estimated nozzle-to-probe Z offset.
// For example, with an offset of -5, consider a starting height of -4. * For example, with an offset of -5, consider a starting height of -4.
// */
//#define PROBE_OFFSET_WIZARD_START_Z -4.0 #define XATC_START_Z 0.0
#define XATC_MAX_POINTS 3 // Number of points to probe in the wizard
// Set a convenient position to do the calibration (probing point and nozzle/bed-distance) #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe
//#define PROBE_OFFSET_WIZARD_XY_POS { X_CENTER, Y_CENTER }
#endif
#if ENABLED(AUTO_BED_LEVELING_BILINEAR)
// Add a calibration procedure in the Probe Offsets menu
// to compensate for twist in the X-axis.
//#define X_AXIS_TWIST_COMPENSATION
#if ENABLED(X_AXIS_TWIST_COMPENSATION)
/**
* Enable to init the Probe Z-Offset when starting the Wizard.
* Use a height slightly above the estimated nozzle-to-probe Z offset.
* For example, with an offset of -5, consider a starting height of -4.
*/
#define XATC_START_Z 0.0
#define XATC_MAX_POINTS 3 // Number of points to probe in the wizard
#define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe
#endif
#endif #endif
#endif #endif

56
config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h
View file

@ -1280,37 +1280,35 @@
#define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440
#endif #endif
#if HAS_BED_PROBE && EITHER(HAS_MARLINUI_MENU, HAS_TFT_LVGL_UI)
//#define PROBE_OFFSET_WIZARD // Add a Probe Z Offset calibration option to the LCD menu
#if ENABLED(PROBE_OFFSET_WIZARD)
/**
* Enable to init the Probe Z-Offset when starting the Wizard.
* Use a height slightly above the estimated nozzle-to-probe Z offset.
* For example, with an offset of -5, consider a starting height of -4.
*/
//#define PROBE_OFFSET_WIZARD_START_Z -4.0
// Set a convenient position to do the calibration (probing point and nozzle/bed-distance)
//#define PROBE_OFFSET_WIZARD_XY_POS { X_CENTER, Y_CENTER }
#endif
#endif
#if HAS_MARLINUI_MENU #if HAS_MARLINUI_MENU
// Add Probe Z Offset calibration to the Z Probe Offsets menu #if BOTH(HAS_BED_PROBE, AUTO_BED_LEVELING_BILINEAR)
#if HAS_BED_PROBE // Add calibration in the Probe Offsets menu to compensate for X-axis twist.
//#define PROBE_OFFSET_WIZARD //#define X_AXIS_TWIST_COMPENSATION
#if ENABLED(PROBE_OFFSET_WIZARD) #if ENABLED(X_AXIS_TWIST_COMPENSATION)
// /**
// Enable to init the Probe Z-Offset when starting the Wizard. * Enable to init the Probe Z-Offset when starting the Wizard.
// Use a height slightly above the estimated nozzle-to-probe Z offset. * Use a height slightly above the estimated nozzle-to-probe Z offset.
// For example, with an offset of -5, consider a starting height of -4. * For example, with an offset of -5, consider a starting height of -4.
// */
//#define PROBE_OFFSET_WIZARD_START_Z -4.0 #define XATC_START_Z 0.0
#define XATC_MAX_POINTS 3 // Number of points to probe in the wizard
// Set a convenient position to do the calibration (probing point and nozzle/bed-distance) #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe
//#define PROBE_OFFSET_WIZARD_XY_POS { X_CENTER, Y_CENTER }
#endif
#if ENABLED(AUTO_BED_LEVELING_BILINEAR)
// Add a calibration procedure in the Probe Offsets menu
// to compensate for twist in the X-axis.
//#define X_AXIS_TWIST_COMPENSATION
#if ENABLED(X_AXIS_TWIST_COMPENSATION)
/**
* Enable to init the Probe Z-Offset when starting the Wizard.
* Use a height slightly above the estimated nozzle-to-probe Z offset.
* For example, with an offset of -5, consider a starting height of -4.
*/
#define XATC_START_Z 0.0
#define XATC_MAX_POINTS 3 // Number of points to probe in the wizard
#define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe
#endif
#endif #endif
#endif #endif

56
config/examples/Creality/Ender-3/CrealityV1/Configuration_adv.h
View file

@ -1280,37 +1280,35 @@
#define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440
#endif #endif
#if HAS_BED_PROBE && EITHER(HAS_MARLINUI_MENU, HAS_TFT_LVGL_UI)
//#define PROBE_OFFSET_WIZARD // Add a Probe Z Offset calibration option to the LCD menu
#if ENABLED(PROBE_OFFSET_WIZARD)
/**
* Enable to init the Probe Z-Offset when starting the Wizard.
* Use a height slightly above the estimated nozzle-to-probe Z offset.
* For example, with an offset of -5, consider a starting height of -4.
*/
//#define PROBE_OFFSET_WIZARD_START_Z -4.0
// Set a convenient position to do the calibration (probing point and nozzle/bed-distance)
//#define PROBE_OFFSET_WIZARD_XY_POS { X_CENTER, Y_CENTER }
#endif
#endif
#if HAS_MARLINUI_MENU #if HAS_MARLINUI_MENU
// Add Probe Z Offset calibration to the Z Probe Offsets menu #if BOTH(HAS_BED_PROBE, AUTO_BED_LEVELING_BILINEAR)
#if HAS_BED_PROBE // Add calibration in the Probe Offsets menu to compensate for X-axis twist.
//#define PROBE_OFFSET_WIZARD //#define X_AXIS_TWIST_COMPENSATION
#if ENABLED(PROBE_OFFSET_WIZARD) #if ENABLED(X_AXIS_TWIST_COMPENSATION)
// /**
// Enable to init the Probe Z-Offset when starting the Wizard. * Enable to init the Probe Z-Offset when starting the Wizard.
// Use a height slightly above the estimated nozzle-to-probe Z offset. * Use a height slightly above the estimated nozzle-to-probe Z offset.
// For example, with an offset of -5, consider a starting height of -4. * For example, with an offset of -5, consider a starting height of -4.
// */
//#define PROBE_OFFSET_WIZARD_START_Z -4.0 #define XATC_START_Z 0.0
#define XATC_MAX_POINTS 3 // Number of points to probe in the wizard
// Set a convenient position to do the calibration (probing point and nozzle/bed-distance) #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe
//#define PROBE_OFFSET_WIZARD_XY_POS { X_CENTER, Y_CENTER }
#endif
#if ENABLED(AUTO_BED_LEVELING_BILINEAR)
// Add a calibration procedure in the Probe Offsets menu
// to compensate for twist in the X-axis.
//#define X_AXIS_TWIST_COMPENSATION
#if ENABLED(X_AXIS_TWIST_COMPENSATION)
/**
* Enable to init the Probe Z-Offset when starting the Wizard.
* Use a height slightly above the estimated nozzle-to-probe Z offset.
* For example, with an offset of -5, consider a starting height of -4.
*/
#define XATC_START_Z 0.0
#define XATC_MAX_POINTS 3 // Number of points to probe in the wizard
#define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe
#endif
#endif #endif
#endif #endif

56
config/examples/Creality/Ender-3/CrealityV422/Configuration_adv.h
View file

@ -1280,37 +1280,35 @@
#define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440
#endif #endif
#if HAS_BED_PROBE && EITHER(HAS_MARLINUI_MENU, HAS_TFT_LVGL_UI)
//#define PROBE_OFFSET_WIZARD // Add a Probe Z Offset calibration option to the LCD menu
#if ENABLED(PROBE_OFFSET_WIZARD)
/**
* Enable to init the Probe Z-Offset when starting the Wizard.
* Use a height slightly above the estimated nozzle-to-probe Z offset.
* For example, with an offset of -5, consider a starting height of -4.
*/
//#define PROBE_OFFSET_WIZARD_START_Z -4.0
// Set a convenient position to do the calibration (probing point and nozzle/bed-distance)
//#define PROBE_OFFSET_WIZARD_XY_POS { X_CENTER, Y_CENTER }
#endif
#endif
#if HAS_MARLINUI_MENU #if HAS_MARLINUI_MENU
// Add Probe Z Offset calibration to the Z Probe Offsets menu #if BOTH(HAS_BED_PROBE, AUTO_BED_LEVELING_BILINEAR)
#if HAS_BED_PROBE // Add calibration in the Probe Offsets menu to compensate for X-axis twist.
//#define PROBE_OFFSET_WIZARD //#define X_AXIS_TWIST_COMPENSATION
#if ENABLED(PROBE_OFFSET_WIZARD) #if ENABLED(X_AXIS_TWIST_COMPENSATION)
// /**
// Enable to init the Probe Z-Offset when starting the Wizard. * Enable to init the Probe Z-Offset when starting the Wizard.
// Use a height slightly above the estimated nozzle-to-probe Z offset. * Use a height slightly above the estimated nozzle-to-probe Z offset.
// For example, with an offset of -5, consider a starting height of -4. * For example, with an offset of -5, consider a starting height of -4.
// */
//#define PROBE_OFFSET_WIZARD_START_Z -4.0 #define XATC_START_Z 0.0
#define XATC_MAX_POINTS 3 // Number of points to probe in the wizard
// Set a convenient position to do the calibration (probing point and nozzle/bed-distance) #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe
//#define PROBE_OFFSET_WIZARD_XY_POS { X_CENTER, Y_CENTER }
#endif
#if ENABLED(AUTO_BED_LEVELING_BILINEAR)
// Add a calibration procedure in the Probe Offsets menu
// to compensate for twist in the X-axis.
//#define X_AXIS_TWIST_COMPENSATION
#if ENABLED(X_AXIS_TWIST_COMPENSATION)
/**
* Enable to init the Probe Z-Offset when starting the Wizard.
* Use a height slightly above the estimated nozzle-to-probe Z offset.
* For example, with an offset of -5, consider a starting height of -4.
*/
#define XATC_START_Z 0.0
#define XATC_MAX_POINTS 3 // Number of points to probe in the wizard
#define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe
#endif
#endif #endif
#endif #endif

56
config/examples/Creality/Ender-3/CrealityV427/Configuration_adv.h
View file

@ -1280,37 +1280,35 @@
#define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440
#endif #endif
#if HAS_BED_PROBE && EITHER(HAS_MARLINUI_MENU, HAS_TFT_LVGL_UI)
//#define PROBE_OFFSET_WIZARD // Add a Probe Z Offset calibration option to the LCD menu
#if ENABLED(PROBE_OFFSET_WIZARD)
/**
* Enable to init the Probe Z-Offset when starting the Wizard.
* Use a height slightly above the estimated nozzle-to-probe Z offset.
* For example, with an offset of -5, consider a starting height of -4.
*/
//#define PROBE_OFFSET_WIZARD_START_Z -4.0
// Set a convenient position to do the calibration (probing point and nozzle/bed-distance)
//#define PROBE_OFFSET_WIZARD_XY_POS { X_CENTER, Y_CENTER }
#endif
#endif
#if HAS_MARLINUI_MENU #if HAS_MARLINUI_MENU
// Add Probe Z Offset calibration to the Z Probe Offsets menu #if BOTH(HAS_BED_PROBE, AUTO_BED_LEVELING_BILINEAR)
#if HAS_BED_PROBE // Add calibration in the Probe Offsets menu to compensate for X-axis twist.
//#define PROBE_OFFSET_WIZARD //#define X_AXIS_TWIST_COMPENSATION
#if ENABLED(PROBE_OFFSET_WIZARD) #if ENABLED(X_AXIS_TWIST_COMPENSATION)
// /**
// Enable to init the Probe Z-Offset when starting the Wizard. * Enable to init the Probe Z-Offset when starting the Wizard.
// Use a height slightly above the estimated nozzle-to-probe Z offset. * Use a height slightly above the estimated nozzle-to-probe Z offset.
// For example, with an offset of -5, consider a starting height of -4. * For example, with an offset of -5, consider a starting height of -4.
// */
//#define PROBE_OFFSET_WIZARD_START_Z -4.0 #define XATC_START_Z 0.0
#define XATC_MAX_POINTS 3 // Number of points to probe in the wizard
// Set a convenient position to do the calibration (probing point and nozzle/bed-distance) #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe
//#define PROBE_OFFSET_WIZARD_XY_POS { X_CENTER, Y_CENTER }
#endif
#if ENABLED(AUTO_BED_LEVELING_BILINEAR)
// Add a calibration procedure in the Probe Offsets menu
// to compensate for twist in the X-axis.
//#define X_AXIS_TWIST_COMPENSATION
#if ENABLED(X_AXIS_TWIST_COMPENSATION)
/**
* Enable to init the Probe Z-Offset when starting the Wizard.
* Use a height slightly above the estimated nozzle-to-probe Z offset.
* For example, with an offset of -5, consider a starting height of -4.
*/
#define XATC_START_Z 0.0
#define XATC_MAX_POINTS 3 // Number of points to probe in the wizard
#define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe
#endif
#endif #endif
#endif #endif

56
config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/BLTouch/Configuration_adv.h
View file

@ -1280,37 +1280,35 @@
#define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440
#endif #endif
#if HAS_BED_PROBE && EITHER(HAS_MARLINUI_MENU, HAS_TFT_LVGL_UI)
//#define PROBE_OFFSET_WIZARD // Add a Probe Z Offset calibration option to the LCD menu
#if ENABLED(PROBE_OFFSET_WIZARD)
/**
* Enable to init the Probe Z-Offset when starting the Wizard.
* Use a height slightly above the estimated nozzle-to-probe Z offset.
* For example, with an offset of -5, consider a starting height of -4.
*/
//#define PROBE_OFFSET_WIZARD_START_Z -4.0
// Set a convenient position to do the calibration (probing point and nozzle/bed-distance)
//#define PROBE_OFFSET_WIZARD_XY_POS { X_CENTER, Y_CENTER }
#endif
#endif
#if HAS_MARLINUI_MENU #if HAS_MARLINUI_MENU
// Add Probe Z Offset calibration to the Z Probe Offsets menu #if BOTH(HAS_BED_PROBE, AUTO_BED_LEVELING_BILINEAR)
#if HAS_BED_PROBE // Add calibration in the Probe Offsets menu to compensate for X-axis twist.
//#define PROBE_OFFSET_WIZARD //#define X_AXIS_TWIST_COMPENSATION
#if ENABLED(PROBE_OFFSET_WIZARD) #if ENABLED(X_AXIS_TWIST_COMPENSATION)
// /**
// Enable to init the Probe Z-Offset when starting the Wizard. * Enable to init the Probe Z-Offset when starting the Wizard.
// Use a height slightly above the estimated nozzle-to-probe Z offset. * Use a height slightly above the estimated nozzle-to-probe Z offset.
// For example, with an offset of -5, consider a starting height of -4. * For example, with an offset of -5, consider a starting height of -4.
// */
//#define PROBE_OFFSET_WIZARD_START_Z -4.0 #define XATC_START_Z 0.0
#define XATC_MAX_POINTS 3 // Number of points to probe in the wizard
// Set a convenient position to do the calibration (probing point and nozzle/bed-distance) #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe
//#define PROBE_OFFSET_WIZARD_XY_POS { X_CENTER, Y_CENTER }
#endif
#if ENABLED(AUTO_BED_LEVELING_BILINEAR)
// Add a calibration procedure in the Probe Offsets menu
// to compensate for twist in the X-axis.
//#define X_AXIS_TWIST_COMPENSATION
#if ENABLED(X_AXIS_TWIST_COMPENSATION)
/**
* Enable to init the Probe Z-Offset when starting the Wizard.
* Use a height slightly above the estimated nozzle-to-probe Z offset.
* For example, with an offset of -5, consider a starting height of -4.
*/
#define XATC_START_Z 0.0
#define XATC_MAX_POINTS 3 // Number of points to probe in the wizard
#define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe
#endif
#endif #endif
#endif #endif

56
config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/base/Configuration_adv.h
View file

@ -1280,37 +1280,35 @@
#define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440
#endif #endif
#if HAS_BED_PROBE && EITHER(HAS_MARLINUI_MENU, HAS_TFT_LVGL_UI)
//#define PROBE_OFFSET_WIZARD // Add a Probe Z Offset calibration option to the LCD menu
#if ENABLED(PROBE_OFFSET_WIZARD)
/**
* Enable to init the Probe Z-Offset when starting the Wizard.
* Use a height slightly above the estimated nozzle-to-probe Z offset.
* For example, with an offset of -5, consider a starting height of -4.
*/
//#define PROBE_OFFSET_WIZARD_START_Z -4.0
// Set a convenient position to do the calibration (probing point and nozzle/bed-distance)
//#define PROBE_OFFSET_WIZARD_XY_POS { X_CENTER, Y_CENTER }
#endif
#endif
#if HAS_MARLINUI_MENU #if HAS_MARLINUI_MENU
// Add Probe Z Offset calibration to the Z Probe Offsets menu #if BOTH(HAS_BED_PROBE, AUTO_BED_LEVELING_BILINEAR)
#if HAS_BED_PROBE // Add calibration in the Probe Offsets menu to compensate for X-axis twist.
//#define PROBE_OFFSET_WIZARD //#define X_AXIS_TWIST_COMPENSATION
#if ENABLED(PROBE_OFFSET_WIZARD) #if ENABLED(X_AXIS_TWIST_COMPENSATION)
// /**
// Enable to init the Probe Z-Offset when starting the Wizard. * Enable to init the Probe Z-Offset when starting the Wizard.
// Use a height slightly above the estimated nozzle-to-probe Z offset. * Use a height slightly above the estimated nozzle-to-probe Z offset.
// For example, with an offset of -5, consider a starting height of -4. * For example, with an offset of -5, consider a starting height of -4.
// */
//#define PROBE_OFFSET_WIZARD_START_Z -4.0 #define XATC_START_Z 0.0
#define XATC_MAX_POINTS 3 // Number of points to probe in the wizard
// Set a convenient position to do the calibration (probing point and nozzle/bed-distance) #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe
//#define PROBE_OFFSET_WIZARD_XY_POS { X_CENTER, Y_CENTER }
#endif
#if ENABLED(AUTO_BED_LEVELING_BILINEAR)
// Add a calibration procedure in the Probe Offsets menu
// to compensate for twist in the X-axis.
//#define X_AXIS_TWIST_COMPENSATION
#if ENABLED(X_AXIS_TWIST_COMPENSATION)
/**
* Enable to init the Probe Z-Offset when starting the Wizard.
* Use a height slightly above the estimated nozzle-to-probe Z offset.
* For example, with an offset of -5, consider a starting height of -4.
*/
#define XATC_START_Z 0.0
#define XATC_MAX_POINTS 3 // Number of points to probe in the wizard
#define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe
#endif
#endif #endif
#endif #endif

56
config/examples/Creality/Ender-3/FYSETC Cheetah/BLTouch/Configuration_adv.h
View file

@ -1280,37 +1280,35 @@
#define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440
#endif #endif
#if HAS_BED_PROBE && EITHER(HAS_MARLINUI_MENU, HAS_TFT_LVGL_UI)
//#define PROBE_OFFSET_WIZARD // Add a Probe Z Offset calibration option to the LCD menu
#if ENABLED(PROBE_OFFSET_WIZARD)
/**
* Enable to init the Probe Z-Offset when starting the Wizard.
* Use a height slightly above the estimated nozzle-to-probe Z offset.
* For example, with an offset of -5, consider a starting height of -4.
*/
//#define PROBE_OFFSET_WIZARD_START_Z -4.0
// Set a convenient position to do the calibration (probing point and nozzle/bed-distance)
//#define PROBE_OFFSET_WIZARD_XY_POS { X_CENTER, Y_CENTER }
#endif
#endif
#if HAS_MARLINUI_MENU #if HAS_MARLINUI_MENU
// Add Probe Z Offset calibration to the Z Probe Offsets menu #if BOTH(HAS_BED_PROBE, AUTO_BED_LEVELING_BILINEAR)
#if HAS_BED_PROBE // Add calibration in the Probe Offsets menu to compensate for X-axis twist.
//#define PROBE_OFFSET_WIZARD //#define X_AXIS_TWIST_COMPENSATION
#if ENABLED(PROBE_OFFSET_WIZARD) #if ENABLED(X_AXIS_TWIST_COMPENSATION)
// /**
// Enable to init the Probe Z-Offset when starting the Wizard. * Enable to init the Probe Z-Offset when starting the Wizard.
// Use a height slightly above the estimated nozzle-to-probe Z offset. * Use a height slightly above the estimated nozzle-to-probe Z offset.
// For example, with an offset of -5, consider a starting height of -4. * For example, with an offset of -5, consider a starting height of -4.
// */
//#define PROBE_OFFSET_WIZARD_START_Z -4.0 #define XATC_START_Z 0.0
#define XATC_MAX_POINTS 3 // Number of points to probe in the wizard
// Set a convenient position to do the calibration (probing point and nozzle/bed-distance) #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe
//#define PROBE_OFFSET_WIZARD_XY_POS { X_CENTER, Y_CENTER }
#endif
#if ENABLED(AUTO_BED_LEVELING_BILINEAR)
// Add a calibration procedure in the Probe Offsets menu
// to compensate for twist in the X-axis.
//#define X_AXIS_TWIST_COMPENSATION
#if ENABLED(X_AXIS_TWIST_COMPENSATION)
/**
* Enable to init the Probe Z-Offset when starting the Wizard.
* Use a height slightly above the estimated nozzle-to-probe Z offset.
* For example, with an offset of -5, consider a starting height of -4.
*/
#define XATC_START_Z 0.0
#define XATC_MAX_POINTS 3 // Number of points to probe in the wizard
#define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe
#endif
#endif #endif
#endif #endif

Some files were not shown because too many files have changed in this diff Show more