diff --git a/config/examples/AnyCubic/Mega Zero/Configuration.h b/config/examples/AnyCubic/Mega Zero/Configuration.h
index 17002c0538..d21fd8f43d 100644
--- a/config/examples/AnyCubic/Mega Zero/Configuration.h	
+++ b/config/examples/AnyCubic/Mega Zero/Configuration.h	
@@ -1140,8 +1140,8 @@
 #define Y_BED_SIZE 220
 
 // Travel limits (mm) after homing, corresponding to endstop positions.
-#define X_MIN_POS -10
-#define Y_MIN_POS -10
+#define X_MIN_POS -9
+#define Y_MIN_POS 0
 #define Z_MIN_POS 0
 #define X_MAX_POS X_BED_SIZE
 #define Y_MAX_POS Y_BED_SIZE
@@ -1250,13 +1250,13 @@
 //#define AUTO_BED_LEVELING_LINEAR
 //#define AUTO_BED_LEVELING_BILINEAR
 //#define AUTO_BED_LEVELING_UBL
-//#define MESH_BED_LEVELING
+#define MESH_BED_LEVELING
 
 /**
  * Normally G28 leaves leveling disabled on completion. Enable
  * this option to have G28 restore the prior leveling state.
  */
-//#define RESTORE_LEVELING_AFTER_G28
+#define RESTORE_LEVELING_AFTER_G28
 
 /**
  * Enable detailed logging of G28, G29, M48, etc.
@@ -1355,12 +1355,12 @@
  * Add a bed leveling sub-menu for ABL or MBL.
  * Include a guided procedure if manual probing is enabled.
  */
-//#define LCD_BED_LEVELING
+#define LCD_BED_LEVELING
 
 #if ENABLED(LCD_BED_LEVELING)
   #define MESH_EDIT_Z_STEP  0.025 // (mm) Step size while manually probing Z axis.
   #define LCD_PROBE_Z_RANGE 4     // (mm) Z Range centered on Z_MIN_POS for LCD Z adjustment
-  //#define MESH_EDIT_MENU        // Add a menu to edit mesh points
+  #define MESH_EDIT_MENU        // Add a menu to edit mesh points
 #endif
 
 // Add a menu item to move between bed corners for manual bed adjustment
@@ -1766,7 +1766,7 @@
  * just remove some extraneous menu items to recover space.
  */
 //#define NO_LCD_MENUS
-//#define SLIM_LCD_MENUS
+#define SLIM_LCD_MENUS
 
 //
 // ENCODER SETTINGS
@@ -1820,7 +1820,7 @@
 //
 // Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu.
 //
-//#define INDIVIDUAL_AXIS_HOMING_MENU
+#define INDIVIDUAL_AXIS_HOMING_MENU
 
 //
 // SPEAKER/BUZZER
diff --git a/config/examples/AnyCubic/Mega Zero/Configuration_adv.h b/config/examples/AnyCubic/Mega Zero/Configuration_adv.h
index d108198b7e..a298b6d141 100644
--- a/config/examples/AnyCubic/Mega Zero/Configuration_adv.h	
+++ b/config/examples/AnyCubic/Mega Zero/Configuration_adv.h	
@@ -634,7 +634,7 @@
 
 //#define HOMING_BACKOFF_POST_MM { 2, 2, 2 }  // (mm) Backoff from endstops after homing
 
-//#define QUICK_HOME                          // If G28 contains XY do a diagonal move first
+#define QUICK_HOME                          // If G28 contains XY do a diagonal move first
 //#define HOME_Y_BEFORE_X                     // If G28 contains XY home Y before X
 //#define CODEPENDENT_XY_HOMING               // If X/Y can't home without homing Y/X first
 
@@ -1056,7 +1056,7 @@
   #endif
 
   // BACK menu items keep the highlight at the top
-  //#define TURBO_BACK_MENU_ITEM
+  #define TURBO_BACK_MENU_ITEM
 
   /**
    * LED Control Menu
@@ -1096,7 +1096,7 @@
 //#define LCD_TIMEOUT_TO_STATUS 15000
 
 // Add an 'M73' G-code to set the current percentage
-//#define LCD_SET_PROGRESS_MANUALLY
+#define LCD_SET_PROGRESS_MANUALLY
 
 // Show the E position (filament used) during printing
 //#define LCD_SHOW_E_TOTAL
@@ -1109,7 +1109,7 @@
   //#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits
   #define SHOW_REMAINING_TIME          // Display estimated time to completion
   #if ENABLED(SHOW_REMAINING_TIME)
-    //#define USE_M73_REMAINING_TIME     // Use remaining time from M73 command instead of estimation
+    #define USE_M73_REMAINING_TIME     // Use remaining time from M73 command instead of estimation
     #define ROTATE_PROGRESS_DISPLAY    // Display (P)rogress, (E)lapsed, and (R)emaining time
   #endif
 #endif
@@ -1756,7 +1756,7 @@
 //
 // G2/G3 Arc Support
 //
-#define ARC_SUPPORT                 // Disable this feature to save ~3226 bytes
+//#define ARC_SUPPORT                 // Disable this feature to save ~3226 bytes
 #if ENABLED(ARC_SUPPORT)
   #define MM_PER_ARC_SEGMENT      1 // (mm) Length (or minimum length) of each arc segment
   //#define ARC_SEGMENTS_PER_R    1 // Max segment length, MM_PER = Min
@@ -3089,7 +3089,7 @@
 /**
  * Disable all Volumetric extrusion options
  */
-//#define NO_VOLUMETRICS
+#define NO_VOLUMETRICS
 
 #if DISABLED(NO_VOLUMETRICS)
   /**
diff --git a/config/examples/AnyCubic/Mega Zero/_Bootscreen.h b/config/examples/AnyCubic/Mega Zero/_Bootscreen.h
index f71a6b0fbc..bcbe466314 100644
--- a/config/examples/AnyCubic/Mega Zero/_Bootscreen.h	
+++ b/config/examples/AnyCubic/Mega Zero/_Bootscreen.h	
@@ -22,7 +22,7 @@
 #pragma once
 
 //#define CUSTOM_BOOTSCREEN_TIMEOUT 2000
-#define CUSTOM_BOOTSCREEN_INVERTED
+//#define CUSTOM_BOOTSCREEN_INVERTED
 
 #define CUSTOM_BOOTSCREEN_BMPWIDTH  128