3D-printing/Configurations
1
0
Fork 0
mirror of https://github.com/MarlinFirmware/Configurations.git synced 2025-07-07 06:57:39 -06:00
Code Issues Projects Releases Packages Wiki Activity Actions

✨ More fan kickstarts

Browse source 
MarlinFirmware/Marlin#26581
This commit is contained in:
Scott Lahteine 2023-12-28 18:43:50 -06:00
parent 1de2f3b0b9
commit 16b7191965
354 changed files with 4945 additions and 2823 deletions
Download patch file Download diff file Expand all files Collapse all files

22
config/default/Configuration_adv.h
View file

@ -584,6 +584,9 @@
#define CONTROLLERFAN_SPEED_IDLE 0 // (0-255) Idle speed, used when motors are disabled #define CONTROLLERFAN_SPEED_IDLE 0 // (0-255) Idle speed, used when motors are disabled
#define CONTROLLERFAN_IDLE_TIME 60 // (seconds) Extra time to keep the fan running after disabling motors #define CONTROLLERFAN_IDLE_TIME 60 // (seconds) Extra time to keep the fan running after disabling motors
//#define CONTROLLERFAN_KICKSTART_TIME 100 // (ms)
//#define CONTROLLERFAN_KICKSTART_POWER 180 // 64-255
// Use TEMP_SENSOR_BOARD as a trigger for enabling the controller fan // Use TEMP_SENSOR_BOARD as a trigger for enabling the controller fan
//#define CONTROLLER_FAN_MIN_BOARD_TEMP 40 // (°C) Turn on the fan if the board reaches this temperature //#define CONTROLLER_FAN_MIN_BOARD_TEMP 40 // (°C) Turn on the fan if the board reaches this temperature
@ -602,8 +605,8 @@
* gets it spinning reliably for a short time before setting the requested speed. * gets it spinning reliably for a short time before setting the requested speed.
* (Does not work on Sanguinololu with FAN_SOFT_PWM.) * (Does not work on Sanguinololu with FAN_SOFT_PWM.)
*/ */
//#define FAN_KICKSTART_TIME 100 // (ms) //#define EFAN_KICKSTART_TIME 100 // (ms)
//#define FAN_KICKSTART_POWER 180 // 64-255 //#define EFAN_KICKSTART_POWER 180 // 64-255
// Some coolers may require a non-zero "off" state. // Some coolers may require a non-zero "off" state.
//#define FAN_OFF_PWM 1 //#define FAN_OFF_PWM 1
@ -692,12 +695,15 @@
#define CHAMBER_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1
#define COOLER_AUTO_FAN_PIN -1 #define COOLER_AUTO_FAN_PIN -1
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50
#define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 is full speed
#define CHAMBER_AUTO_FAN_TEMPERATURE 30 //#define EXTRUDER_AUTO_FAN_KICKSTART_TIME 100 // (ms)
#define CHAMBER_AUTO_FAN_SPEED 255 //#define EXTRUDER_AUTO_FAN_KICKSTART_POWER 180 // 64-255
#define COOLER_AUTO_FAN_TEMPERATURE 18
#define COOLER_AUTO_FAN_SPEED 255 #define CHAMBER_AUTO_FAN_TEMPERATURE 28
#define CHAMBER_AUTO_FAN_SPEED 255
#define COOLER_AUTO_FAN_TEMPERATURE 18
#define COOLER_AUTO_FAN_SPEED 255
/** /**
* Hotend Cooling Fans tachometers * Hotend Cooling Fans tachometers

22
config/examples/3DFabXYZ/Migbot/Configuration_adv.h
View file

@ -584,6 +584,9 @@
#define CONTROLLERFAN_SPEED_IDLE 0 // (0-255) Idle speed, used when motors are disabled #define CONTROLLERFAN_SPEED_IDLE 0 // (0-255) Idle speed, used when motors are disabled
#define CONTROLLERFAN_IDLE_TIME 60 // (seconds) Extra time to keep the fan running after disabling motors #define CONTROLLERFAN_IDLE_TIME 60 // (seconds) Extra time to keep the fan running after disabling motors
//#define CONTROLLERFAN_KICKSTART_TIME 100 // (ms)
//#define CONTROLLERFAN_KICKSTART_POWER 180 // 64-255
// Use TEMP_SENSOR_BOARD as a trigger for enabling the controller fan // Use TEMP_SENSOR_BOARD as a trigger for enabling the controller fan
//#define CONTROLLER_FAN_MIN_BOARD_TEMP 40 // (°C) Turn on the fan if the board reaches this temperature //#define CONTROLLER_FAN_MIN_BOARD_TEMP 40 // (°C) Turn on the fan if the board reaches this temperature
@ -602,8 +605,8 @@
* gets it spinning reliably for a short time before setting the requested speed. * gets it spinning reliably for a short time before setting the requested speed.
* (Does not work on Sanguinololu with FAN_SOFT_PWM.) * (Does not work on Sanguinololu with FAN_SOFT_PWM.)
*/ */
//#define FAN_KICKSTART_TIME 100 // (ms) //#define EFAN_KICKSTART_TIME 100 // (ms)
//#define FAN_KICKSTART_POWER 180 // 64-255 //#define EFAN_KICKSTART_POWER 180 // 64-255
// Some coolers may require a non-zero "off" state. // Some coolers may require a non-zero "off" state.
//#define FAN_OFF_PWM 1 //#define FAN_OFF_PWM 1
@ -692,12 +695,15 @@
#define CHAMBER_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1
#define COOLER_AUTO_FAN_PIN -1 #define COOLER_AUTO_FAN_PIN -1
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50
#define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 is full speed
#define CHAMBER_AUTO_FAN_TEMPERATURE 30 //#define EXTRUDER_AUTO_FAN_KICKSTART_TIME 100 // (ms)
#define CHAMBER_AUTO_FAN_SPEED 255 //#define EXTRUDER_AUTO_FAN_KICKSTART_POWER 180 // 64-255
#define COOLER_AUTO_FAN_TEMPERATURE 18
#define COOLER_AUTO_FAN_SPEED 255 #define CHAMBER_AUTO_FAN_TEMPERATURE 28
#define CHAMBER_AUTO_FAN_SPEED 255
#define COOLER_AUTO_FAN_TEMPERATURE 18
#define COOLER_AUTO_FAN_SPEED 255
/** /**
* Hotend Cooling Fans tachometers * Hotend Cooling Fans tachometers

22
config/examples/ADIMLab/Gantry v1/Configuration_adv.h
View file

@ -584,6 +584,9 @@
#define CONTROLLERFAN_SPEED_IDLE 0 // (0-255) Idle speed, used when motors are disabled #define CONTROLLERFAN_SPEED_IDLE 0 // (0-255) Idle speed, used when motors are disabled
#define CONTROLLERFAN_IDLE_TIME 60 // (seconds) Extra time to keep the fan running after disabling motors #define CONTROLLERFAN_IDLE_TIME 60 // (seconds) Extra time to keep the fan running after disabling motors
//#define CONTROLLERFAN_KICKSTART_TIME 100 // (ms)
//#define CONTROLLERFAN_KICKSTART_POWER 180 // 64-255
// Use TEMP_SENSOR_BOARD as a trigger for enabling the controller fan // Use TEMP_SENSOR_BOARD as a trigger for enabling the controller fan
//#define CONTROLLER_FAN_MIN_BOARD_TEMP 40 // (°C) Turn on the fan if the board reaches this temperature //#define CONTROLLER_FAN_MIN_BOARD_TEMP 40 // (°C) Turn on the fan if the board reaches this temperature
@ -602,8 +605,8 @@
* gets it spinning reliably for a short time before setting the requested speed. * gets it spinning reliably for a short time before setting the requested speed.
* (Does not work on Sanguinololu with FAN_SOFT_PWM.) * (Does not work on Sanguinololu with FAN_SOFT_PWM.)
*/ */
//#define FAN_KICKSTART_TIME 100 // (ms) //#define EFAN_KICKSTART_TIME 100 // (ms)
//#define FAN_KICKSTART_POWER 180 // 64-255 //#define EFAN_KICKSTART_POWER 180 // 64-255
// Some coolers may require a non-zero "off" state. // Some coolers may require a non-zero "off" state.
//#define FAN_OFF_PWM 1 //#define FAN_OFF_PWM 1
@ -692,12 +695,15 @@
#define CHAMBER_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1
#define COOLER_AUTO_FAN_PIN -1 #define COOLER_AUTO_FAN_PIN -1
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50
#define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 is full speed
#define CHAMBER_AUTO_FAN_TEMPERATURE 30 //#define EXTRUDER_AUTO_FAN_KICKSTART_TIME 100 // (ms)
#define CHAMBER_AUTO_FAN_SPEED 255 //#define EXTRUDER_AUTO_FAN_KICKSTART_POWER 180 // 64-255
#define COOLER_AUTO_FAN_TEMPERATURE 18
#define COOLER_AUTO_FAN_SPEED 255 #define CHAMBER_AUTO_FAN_TEMPERATURE 28
#define CHAMBER_AUTO_FAN_SPEED 255
#define COOLER_AUTO_FAN_TEMPERATURE 18
#define COOLER_AUTO_FAN_SPEED 255
/** /**
* Hotend Cooling Fans tachometers * Hotend Cooling Fans tachometers

22
config/examples/ADIMLab/Gantry v2/Configuration_adv.h
View file

@ -584,6 +584,9 @@
#define CONTROLLERFAN_SPEED_IDLE 0 // (0-255) Idle speed, used when motors are disabled #define CONTROLLERFAN_SPEED_IDLE 0 // (0-255) Idle speed, used when motors are disabled
#define CONTROLLERFAN_IDLE_TIME 60 // (seconds) Extra time to keep the fan running after disabling motors #define CONTROLLERFAN_IDLE_TIME 60 // (seconds) Extra time to keep the fan running after disabling motors
//#define CONTROLLERFAN_KICKSTART_TIME 100 // (ms)
//#define CONTROLLERFAN_KICKSTART_POWER 180 // 64-255
// Use TEMP_SENSOR_BOARD as a trigger for enabling the controller fan // Use TEMP_SENSOR_BOARD as a trigger for enabling the controller fan
//#define CONTROLLER_FAN_MIN_BOARD_TEMP 40 // (°C) Turn on the fan if the board reaches this temperature //#define CONTROLLER_FAN_MIN_BOARD_TEMP 40 // (°C) Turn on the fan if the board reaches this temperature
@ -602,8 +605,8 @@
* gets it spinning reliably for a short time before setting the requested speed. * gets it spinning reliably for a short time before setting the requested speed.
* (Does not work on Sanguinololu with FAN_SOFT_PWM.) * (Does not work on Sanguinololu with FAN_SOFT_PWM.)
*/ */
//#define FAN_KICKSTART_TIME 100 // (ms) //#define EFAN_KICKSTART_TIME 100 // (ms)
//#define FAN_KICKSTART_POWER 180 // 64-255 //#define EFAN_KICKSTART_POWER 180 // 64-255
// Some coolers may require a non-zero "off" state. // Some coolers may require a non-zero "off" state.
//#define FAN_OFF_PWM 1 //#define FAN_OFF_PWM 1
@ -692,12 +695,15 @@
#define CHAMBER_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1
#define COOLER_AUTO_FAN_PIN -1 #define COOLER_AUTO_FAN_PIN -1
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50
#define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 is full speed
#define CHAMBER_AUTO_FAN_TEMPERATURE 30 //#define EXTRUDER_AUTO_FAN_KICKSTART_TIME 100 // (ms)
#define CHAMBER_AUTO_FAN_SPEED 255 //#define EXTRUDER_AUTO_FAN_KICKSTART_POWER 180 // 64-255
#define COOLER_AUTO_FAN_TEMPERATURE 18
#define COOLER_AUTO_FAN_SPEED 255 #define CHAMBER_AUTO_FAN_TEMPERATURE 28
#define CHAMBER_AUTO_FAN_SPEED 255
#define COOLER_AUTO_FAN_TEMPERATURE 18
#define COOLER_AUTO_FAN_SPEED 255
/** /**
* Hotend Cooling Fans tachometers * Hotend Cooling Fans tachometers

22
config/examples/Alfawise/U20-bltouch/Configuration_adv.h
View file

@ -584,6 +584,9 @@
#define CONTROLLERFAN_SPEED_IDLE 0 // (0-255) Idle speed, used when motors are disabled #define CONTROLLERFAN_SPEED_IDLE 0 // (0-255) Idle speed, used when motors are disabled
#define CONTROLLERFAN_IDLE_TIME 60 // (seconds) Extra time to keep the fan running after disabling motors #define CONTROLLERFAN_IDLE_TIME 60 // (seconds) Extra time to keep the fan running after disabling motors
//#define CONTROLLERFAN_KICKSTART_TIME 100 // (ms)
//#define CONTROLLERFAN_KICKSTART_POWER 180 // 64-255
// Use TEMP_SENSOR_BOARD as a trigger for enabling the controller fan // Use TEMP_SENSOR_BOARD as a trigger for enabling the controller fan
//#define CONTROLLER_FAN_MIN_BOARD_TEMP 40 // (°C) Turn on the fan if the board reaches this temperature //#define CONTROLLER_FAN_MIN_BOARD_TEMP 40 // (°C) Turn on the fan if the board reaches this temperature
@ -602,8 +605,8 @@
* gets it spinning reliably for a short time before setting the requested speed. * gets it spinning reliably for a short time before setting the requested speed.
* (Does not work on Sanguinololu with FAN_SOFT_PWM.) * (Does not work on Sanguinololu with FAN_SOFT_PWM.)
*/ */
//#define FAN_KICKSTART_TIME 100 // (ms) //#define EFAN_KICKSTART_TIME 100 // (ms)
//#define FAN_KICKSTART_POWER 180 // 64-255 //#define EFAN_KICKSTART_POWER 180 // 64-255
// Some coolers may require a non-zero "off" state. // Some coolers may require a non-zero "off" state.
//#define FAN_OFF_PWM 1 //#define FAN_OFF_PWM 1
@ -692,12 +695,15 @@
#define CHAMBER_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1
#define COOLER_AUTO_FAN_PIN -1 #define COOLER_AUTO_FAN_PIN -1
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50
#define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 is full speed
#define CHAMBER_AUTO_FAN_TEMPERATURE 30 //#define EXTRUDER_AUTO_FAN_KICKSTART_TIME 100 // (ms)
#define CHAMBER_AUTO_FAN_SPEED 255 //#define EXTRUDER_AUTO_FAN_KICKSTART_POWER 180 // 64-255
#define COOLER_AUTO_FAN_TEMPERATURE 18
#define COOLER_AUTO_FAN_SPEED 255 #define CHAMBER_AUTO_FAN_TEMPERATURE 28
#define CHAMBER_AUTO_FAN_SPEED 255
#define COOLER_AUTO_FAN_TEMPERATURE 18
#define COOLER_AUTO_FAN_SPEED 255
/** /**
* Hotend Cooling Fans tachometers * Hotend Cooling Fans tachometers

22
config/examples/Alfawise/U20/Configuration_adv.h
View file

@ -584,6 +584,9 @@
#define CONTROLLERFAN_SPEED_IDLE 0 // (0-255) Idle speed, used when motors are disabled #define CONTROLLERFAN_SPEED_IDLE 0 // (0-255) Idle speed, used when motors are disabled
#define CONTROLLERFAN_IDLE_TIME 60 // (seconds) Extra time to keep the fan running after disabling motors #define CONTROLLERFAN_IDLE_TIME 60 // (seconds) Extra time to keep the fan running after disabling motors
//#define CONTROLLERFAN_KICKSTART_TIME 100 // (ms)
//#define CONTROLLERFAN_KICKSTART_POWER 180 // 64-255
// Use TEMP_SENSOR_BOARD as a trigger for enabling the controller fan // Use TEMP_SENSOR_BOARD as a trigger for enabling the controller fan
//#define CONTROLLER_FAN_MIN_BOARD_TEMP 40 // (°C) Turn on the fan if the board reaches this temperature //#define CONTROLLER_FAN_MIN_BOARD_TEMP 40 // (°C) Turn on the fan if the board reaches this temperature
@ -602,8 +605,8 @@
* gets it spinning reliably for a short time before setting the requested speed. * gets it spinning reliably for a short time before setting the requested speed.
* (Does not work on Sanguinololu with FAN_SOFT_PWM.) * (Does not work on Sanguinololu with FAN_SOFT_PWM.)
*/ */
//#define FAN_KICKSTART_TIME 100 // (ms) //#define EFAN_KICKSTART_TIME 100 // (ms)
//#define FAN_KICKSTART_POWER 180 // 64-255 //#define EFAN_KICKSTART_POWER 180 // 64-255
// Some coolers may require a non-zero "off" state. // Some coolers may require a non-zero "off" state.
//#define FAN_OFF_PWM 1 //#define FAN_OFF_PWM 1
@ -692,12 +695,15 @@
#define CHAMBER_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1
#define COOLER_AUTO_FAN_PIN -1 #define COOLER_AUTO_FAN_PIN -1
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50
#define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 is full speed
#define CHAMBER_AUTO_FAN_TEMPERATURE 30 //#define EXTRUDER_AUTO_FAN_KICKSTART_TIME 100 // (ms)
#define CHAMBER_AUTO_FAN_SPEED 255 //#define EXTRUDER_AUTO_FAN_KICKSTART_POWER 180 // 64-255
#define COOLER_AUTO_FAN_TEMPERATURE 18
#define COOLER_AUTO_FAN_SPEED 255 #define CHAMBER_AUTO_FAN_TEMPERATURE 28
#define CHAMBER_AUTO_FAN_SPEED 255
#define COOLER_AUTO_FAN_TEMPERATURE 18
#define COOLER_AUTO_FAN_SPEED 255
/** /**
* Hotend Cooling Fans tachometers * Hotend Cooling Fans tachometers

22
config/examples/AliExpress/CL-260/Configuration_adv.h
View file

@ -584,6 +584,9 @@
#define CONTROLLERFAN_SPEED_IDLE 0 // (0-255) Idle speed, used when motors are disabled #define CONTROLLERFAN_SPEED_IDLE 0 // (0-255) Idle speed, used when motors are disabled
#define CONTROLLERFAN_IDLE_TIME 60 // (seconds) Extra time to keep the fan running after disabling motors #define CONTROLLERFAN_IDLE_TIME 60 // (seconds) Extra time to keep the fan running after disabling motors
//#define CONTROLLERFAN_KICKSTART_TIME 100 // (ms)
//#define CONTROLLERFAN_KICKSTART_POWER 180 // 64-255
// Use TEMP_SENSOR_BOARD as a trigger for enabling the controller fan // Use TEMP_SENSOR_BOARD as a trigger for enabling the controller fan
//#define CONTROLLER_FAN_MIN_BOARD_TEMP 40 // (°C) Turn on the fan if the board reaches this temperature //#define CONTROLLER_FAN_MIN_BOARD_TEMP 40 // (°C) Turn on the fan if the board reaches this temperature
@ -602,8 +605,8 @@
* gets it spinning reliably for a short time before setting the requested speed. * gets it spinning reliably for a short time before setting the requested speed.
* (Does not work on Sanguinololu with FAN_SOFT_PWM.) * (Does not work on Sanguinololu with FAN_SOFT_PWM.)
*/ */
//#define FAN_KICKSTART_TIME 100 // (ms) //#define EFAN_KICKSTART_TIME 100 // (ms)
//#define FAN_KICKSTART_POWER 180 // 64-255 //#define EFAN_KICKSTART_POWER 180 // 64-255
// Some coolers may require a non-zero "off" state. // Some coolers may require a non-zero "off" state.
//#define FAN_OFF_PWM 1 //#define FAN_OFF_PWM 1
@ -692,12 +695,15 @@
#define CHAMBER_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1
#define COOLER_AUTO_FAN_PIN -1 #define COOLER_AUTO_FAN_PIN -1
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50
#define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 is full speed
#define CHAMBER_AUTO_FAN_TEMPERATURE 30 //#define EXTRUDER_AUTO_FAN_KICKSTART_TIME 100 // (ms)
#define CHAMBER_AUTO_FAN_SPEED 255 //#define EXTRUDER_AUTO_FAN_KICKSTART_POWER 180 // 64-255
#define COOLER_AUTO_FAN_TEMPERATURE 18
#define COOLER_AUTO_FAN_SPEED 255 #define CHAMBER_AUTO_FAN_TEMPERATURE 28
#define CHAMBER_AUTO_FAN_SPEED 255
#define COOLER_AUTO_FAN_TEMPERATURE 18
#define COOLER_AUTO_FAN_SPEED 255
/** /**
* Hotend Cooling Fans tachometers * Hotend Cooling Fans tachometers

22
config/examples/AliExpress/UM2pExt/Configuration_adv.h
View file

@ -584,6 +584,9 @@
#define CONTROLLERFAN_SPEED_IDLE 0 // (0-255) Idle speed, used when motors are disabled #define CONTROLLERFAN_SPEED_IDLE 0 // (0-255) Idle speed, used when motors are disabled
#define CONTROLLERFAN_IDLE_TIME 60 // (seconds) Extra time to keep the fan running after disabling motors #define CONTROLLERFAN_IDLE_TIME 60 // (seconds) Extra time to keep the fan running after disabling motors
//#define CONTROLLERFAN_KICKSTART_TIME 100 // (ms)
//#define CONTROLLERFAN_KICKSTART_POWER 180 // 64-255
// Use TEMP_SENSOR_BOARD as a trigger for enabling the controller fan // Use TEMP_SENSOR_BOARD as a trigger for enabling the controller fan
//#define CONTROLLER_FAN_MIN_BOARD_TEMP 40 // (°C) Turn on the fan if the board reaches this temperature //#define CONTROLLER_FAN_MIN_BOARD_TEMP 40 // (°C) Turn on the fan if the board reaches this temperature
@ -602,8 +605,8 @@
* gets it spinning reliably for a short time before setting the requested speed. * gets it spinning reliably for a short time before setting the requested speed.
* (Does not work on Sanguinololu with FAN_SOFT_PWM.) * (Does not work on Sanguinololu with FAN_SOFT_PWM.)
*/ */
#define FAN_KICKSTART_TIME 100 // (ms) #define EFAN_KICKSTART_TIME 100 // (ms)
//#define FAN_KICKSTART_POWER 180 // 64-255 //#define EFAN_KICKSTART_POWER 180 // 64-255
// Some coolers may require a non-zero "off" state. // Some coolers may require a non-zero "off" state.
//#define FAN_OFF_PWM 1 //#define FAN_OFF_PWM 1
@ -692,12 +695,15 @@
#define CHAMBER_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1
#define COOLER_AUTO_FAN_PIN -1 #define COOLER_AUTO_FAN_PIN -1
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50
#define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 is full speed
#define CHAMBER_AUTO_FAN_TEMPERATURE 30 //#define EXTRUDER_AUTO_FAN_KICKSTART_TIME 100 // (ms)
#define CHAMBER_AUTO_FAN_SPEED 255 //#define EXTRUDER_AUTO_FAN_KICKSTART_POWER 180 // 64-255
#define COOLER_AUTO_FAN_TEMPERATURE 18
#define COOLER_AUTO_FAN_SPEED 255 #define CHAMBER_AUTO_FAN_TEMPERATURE 28
#define CHAMBER_AUTO_FAN_SPEED 255
#define COOLER_AUTO_FAN_TEMPERATURE 18
#define COOLER_AUTO_FAN_SPEED 255
/** /**
* Hotend Cooling Fans tachometers * Hotend Cooling Fans tachometers

22
config/examples/Anet/A2/Configuration_adv.h
View file

@ -584,6 +584,9 @@
#define CONTROLLERFAN_SPEED_IDLE 0 // (0-255) Idle speed, used when motors are disabled #define CONTROLLERFAN_SPEED_IDLE 0 // (0-255) Idle speed, used when motors are disabled
#define CONTROLLERFAN_IDLE_TIME 60 // (seconds) Extra time to keep the fan running after disabling motors #define CONTROLLERFAN_IDLE_TIME 60 // (seconds) Extra time to keep the fan running after disabling motors
//#define CONTROLLERFAN_KICKSTART_TIME 100 // (ms)
//#define CONTROLLERFAN_KICKSTART_POWER 180 // 64-255
// Use TEMP_SENSOR_BOARD as a trigger for enabling the controller fan // Use TEMP_SENSOR_BOARD as a trigger for enabling the controller fan
//#define CONTROLLER_FAN_MIN_BOARD_TEMP 40 // (°C) Turn on the fan if the board reaches this temperature //#define CONTROLLER_FAN_MIN_BOARD_TEMP 40 // (°C) Turn on the fan if the board reaches this temperature
@ -602,8 +605,8 @@
* gets it spinning reliably for a short time before setting the requested speed. * gets it spinning reliably for a short time before setting the requested speed.
* (Does not work on Sanguinololu with FAN_SOFT_PWM.) * (Does not work on Sanguinololu with FAN_SOFT_PWM.)
*/ */
//#define FAN_KICKSTART_TIME 100 // (ms) //#define EFAN_KICKSTART_TIME 100 // (ms)
//#define FAN_KICKSTART_POWER 180 // 64-255 //#define EFAN_KICKSTART_POWER 180 // 64-255
// Some coolers may require a non-zero "off" state. // Some coolers may require a non-zero "off" state.
//#define FAN_OFF_PWM 1 //#define FAN_OFF_PWM 1
@ -692,12 +695,15 @@
#define CHAMBER_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1
#define COOLER_AUTO_FAN_PIN -1 #define COOLER_AUTO_FAN_PIN -1
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50
#define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 is full speed
#define CHAMBER_AUTO_FAN_TEMPERATURE 30 //#define EXTRUDER_AUTO_FAN_KICKSTART_TIME 100 // (ms)
#define CHAMBER_AUTO_FAN_SPEED 255 //#define EXTRUDER_AUTO_FAN_KICKSTART_POWER 180 // 64-255
#define COOLER_AUTO_FAN_TEMPERATURE 18
#define COOLER_AUTO_FAN_SPEED 255 #define CHAMBER_AUTO_FAN_TEMPERATURE 28
#define CHAMBER_AUTO_FAN_SPEED 255
#define COOLER_AUTO_FAN_TEMPERATURE 18
#define COOLER_AUTO_FAN_SPEED 255
/** /**
* Hotend Cooling Fans tachometers * Hotend Cooling Fans tachometers

22
config/examples/Anet/A2plus/Configuration_adv.h
View file

@ -584,6 +584,9 @@
#define CONTROLLERFAN_SPEED_IDLE 0 // (0-255) Idle speed, used when motors are disabled #define CONTROLLERFAN_SPEED_IDLE 0 // (0-255) Idle speed, used when motors are disabled
#define CONTROLLERFAN_IDLE_TIME 60 // (seconds) Extra time to keep the fan running after disabling motors #define CONTROLLERFAN_IDLE_TIME 60 // (seconds) Extra time to keep the fan running after disabling motors
//#define CONTROLLERFAN_KICKSTART_TIME 100 // (ms)
//#define CONTROLLERFAN_KICKSTART_POWER 180 // 64-255
// Use TEMP_SENSOR_BOARD as a trigger for enabling the controller fan // Use TEMP_SENSOR_BOARD as a trigger for enabling the controller fan
//#define CONTROLLER_FAN_MIN_BOARD_TEMP 40 // (°C) Turn on the fan if the board reaches this temperature //#define CONTROLLER_FAN_MIN_BOARD_TEMP 40 // (°C) Turn on the fan if the board reaches this temperature
@ -602,8 +605,8 @@
* gets it spinning reliably for a short time before setting the requested speed. * gets it spinning reliably for a short time before setting the requested speed.
* (Does not work on Sanguinololu with FAN_SOFT_PWM.) * (Does not work on Sanguinololu with FAN_SOFT_PWM.)
*/ */
//#define FAN_KICKSTART_TIME 100 // (ms) //#define EFAN_KICKSTART_TIME 100 // (ms)
//#define FAN_KICKSTART_POWER 180 // 64-255 //#define EFAN_KICKSTART_POWER 180 // 64-255
// Some coolers may require a non-zero "off" state. // Some coolers may require a non-zero "off" state.
//#define FAN_OFF_PWM 1 //#define FAN_OFF_PWM 1
@ -692,12 +695,15 @@
#define CHAMBER_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1
#define COOLER_AUTO_FAN_PIN -1 #define COOLER_AUTO_FAN_PIN -1
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50
#define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 is full speed
#define CHAMBER_AUTO_FAN_TEMPERATURE 30 //#define EXTRUDER_AUTO_FAN_KICKSTART_TIME 100 // (ms)
#define CHAMBER_AUTO_FAN_SPEED 255 //#define EXTRUDER_AUTO_FAN_KICKSTART_POWER 180 // 64-255
#define COOLER_AUTO_FAN_TEMPERATURE 18
#define COOLER_AUTO_FAN_SPEED 255 #define CHAMBER_AUTO_FAN_TEMPERATURE 28
#define CHAMBER_AUTO_FAN_SPEED 255
#define COOLER_AUTO_FAN_TEMPERATURE 18
#define COOLER_AUTO_FAN_SPEED 255
/** /**
* Hotend Cooling Fans tachometers * Hotend Cooling Fans tachometers

22
config/examples/Anet/A6/Configuration_adv.h
View file

@ -584,6 +584,9 @@
#define CONTROLLERFAN_SPEED_IDLE 0 // (0-255) Idle speed, used when motors are disabled #define CONTROLLERFAN_SPEED_IDLE 0 // (0-255) Idle speed, used when motors are disabled
#define CONTROLLERFAN_IDLE_TIME 60 // (seconds) Extra time to keep the fan running after disabling motors #define CONTROLLERFAN_IDLE_TIME 60 // (seconds) Extra time to keep the fan running after disabling motors
//#define CONTROLLERFAN_KICKSTART_TIME 100 // (ms)
//#define CONTROLLERFAN_KICKSTART_POWER 180 // 64-255
// Use TEMP_SENSOR_BOARD as a trigger for enabling the controller fan // Use TEMP_SENSOR_BOARD as a trigger for enabling the controller fan
//#define CONTROLLER_FAN_MIN_BOARD_TEMP 40 // (°C) Turn on the fan if the board reaches this temperature //#define CONTROLLER_FAN_MIN_BOARD_TEMP 40 // (°C) Turn on the fan if the board reaches this temperature
@ -602,8 +605,8 @@
* gets it spinning reliably for a short time before setting the requested speed. * gets it spinning reliably for a short time before setting the requested speed.
* (Does not work on Sanguinololu with FAN_SOFT_PWM.) * (Does not work on Sanguinololu with FAN_SOFT_PWM.)
*/ */
//#define FAN_KICKSTART_TIME 100 // (ms) //#define EFAN_KICKSTART_TIME 100 // (ms)
//#define FAN_KICKSTART_POWER 180 // 64-255 //#define EFAN_KICKSTART_POWER 180 // 64-255
// Some coolers may require a non-zero "off" state. // Some coolers may require a non-zero "off" state.
//#define FAN_OFF_PWM 1 //#define FAN_OFF_PWM 1
@ -692,12 +695,15 @@
#define CHAMBER_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1
#define COOLER_AUTO_FAN_PIN -1 #define COOLER_AUTO_FAN_PIN -1
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50
#define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 is full speed
#define CHAMBER_AUTO_FAN_TEMPERATURE 30 //#define EXTRUDER_AUTO_FAN_KICKSTART_TIME 100 // (ms)
#define CHAMBER_AUTO_FAN_SPEED 255 //#define EXTRUDER_AUTO_FAN_KICKSTART_POWER 180 // 64-255
#define COOLER_AUTO_FAN_TEMPERATURE 18
#define COOLER_AUTO_FAN_SPEED 255 #define CHAMBER_AUTO_FAN_TEMPERATURE 28
#define CHAMBER_AUTO_FAN_SPEED 255
#define COOLER_AUTO_FAN_TEMPERATURE 18
#define COOLER_AUTO_FAN_SPEED 255
/** /**
* Hotend Cooling Fans tachometers * Hotend Cooling Fans tachometers

22
config/examples/Anet/A8/Configuration_adv.h
View file

@ -584,6 +584,9 @@
#define CONTROLLERFAN_SPEED_IDLE 0 // (0-255) Idle speed, used when motors are disabled #define CONTROLLERFAN_SPEED_IDLE 0 // (0-255) Idle speed, used when motors are disabled
#define CONTROLLERFAN_IDLE_TIME 60 // (seconds) Extra time to keep the fan running after disabling motors #define CONTROLLERFAN_IDLE_TIME 60 // (seconds) Extra time to keep the fan running after disabling motors
//#define CONTROLLERFAN_KICKSTART_TIME 100 // (ms)
//#define CONTROLLERFAN_KICKSTART_POWER 180 // 64-255
// Use TEMP_SENSOR_BOARD as a trigger for enabling the controller fan // Use TEMP_SENSOR_BOARD as a trigger for enabling the controller fan
//#define CONTROLLER_FAN_MIN_BOARD_TEMP 40 // (°C) Turn on the fan if the board reaches this temperature //#define CONTROLLER_FAN_MIN_BOARD_TEMP 40 // (°C) Turn on the fan if the board reaches this temperature
@ -602,8 +605,8 @@
* gets it spinning reliably for a short time before setting the requested speed. * gets it spinning reliably for a short time before setting the requested speed.
* (Does not work on Sanguinololu with FAN_SOFT_PWM.) * (Does not work on Sanguinololu with FAN_SOFT_PWM.)
*/ */
//#define FAN_KICKSTART_TIME 100 // (ms) //#define EFAN_KICKSTART_TIME 100 // (ms)
//#define FAN_KICKSTART_POWER 180 // 64-255 //#define EFAN_KICKSTART_POWER 180 // 64-255
// Some coolers may require a non-zero "off" state. // Some coolers may require a non-zero "off" state.
//#define FAN_OFF_PWM 1 //#define FAN_OFF_PWM 1
@ -692,12 +695,15 @@
#define CHAMBER_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1
#define COOLER_AUTO_FAN_PIN -1 #define COOLER_AUTO_FAN_PIN -1
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50
#define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 is full speed
#define CHAMBER_AUTO_FAN_TEMPERATURE 30 //#define EXTRUDER_AUTO_FAN_KICKSTART_TIME 100 // (ms)
#define CHAMBER_AUTO_FAN_SPEED 255 //#define EXTRUDER_AUTO_FAN_KICKSTART_POWER 180 // 64-255
#define COOLER_AUTO_FAN_TEMPERATURE 18
#define COOLER_AUTO_FAN_SPEED 255 #define CHAMBER_AUTO_FAN_TEMPERATURE 28
#define CHAMBER_AUTO_FAN_SPEED 255
#define COOLER_AUTO_FAN_TEMPERATURE 18
#define COOLER_AUTO_FAN_SPEED 255
/** /**
* Hotend Cooling Fans tachometers * Hotend Cooling Fans tachometers

22
config/examples/Anet/A8plus/Configuration_adv.h
View file

@ -584,6 +584,9 @@
#define CONTROLLERFAN_SPEED_IDLE 0 // (0-255) Idle speed, used when motors are disabled #define CONTROLLERFAN_SPEED_IDLE 0 // (0-255) Idle speed, used when motors are disabled
#define CONTROLLERFAN_IDLE_TIME 60 // (seconds) Extra time to keep the fan running after disabling motors #define CONTROLLERFAN_IDLE_TIME 60 // (seconds) Extra time to keep the fan running after disabling motors
//#define CONTROLLERFAN_KICKSTART_TIME 100 // (ms)
//#define CONTROLLERFAN_KICKSTART_POWER 180 // 64-255
// Use TEMP_SENSOR_BOARD as a trigger for enabling the controller fan // Use TEMP_SENSOR_BOARD as a trigger for enabling the controller fan
//#define CONTROLLER_FAN_MIN_BOARD_TEMP 40 // (°C) Turn on the fan if the board reaches this temperature //#define CONTROLLER_FAN_MIN_BOARD_TEMP 40 // (°C) Turn on the fan if the board reaches this temperature
@ -602,8 +605,8 @@
* gets it spinning reliably for a short time before setting the requested speed. * gets it spinning reliably for a short time before setting the requested speed.
* (Does not work on Sanguinololu with FAN_SOFT_PWM.) * (Does not work on Sanguinololu with FAN_SOFT_PWM.)
*/ */
//#define FAN_KICKSTART_TIME 100 // (ms) //#define EFAN_KICKSTART_TIME 100 // (ms)
//#define FAN_KICKSTART_POWER 180 // 64-255 //#define EFAN_KICKSTART_POWER 180 // 64-255
// Some coolers may require a non-zero "off" state. // Some coolers may require a non-zero "off" state.
//#define FAN_OFF_PWM 1 //#define FAN_OFF_PWM 1
@ -692,12 +695,15 @@
#define CHAMBER_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1
#define COOLER_AUTO_FAN_PIN -1 #define COOLER_AUTO_FAN_PIN -1
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50
#define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 is full speed
#define CHAMBER_AUTO_FAN_TEMPERATURE 30 //#define EXTRUDER_AUTO_FAN_KICKSTART_TIME 100 // (ms)
#define CHAMBER_AUTO_FAN_SPEED 255 //#define EXTRUDER_AUTO_FAN_KICKSTART_POWER 180 // 64-255
#define COOLER_AUTO_FAN_TEMPERATURE 18
#define COOLER_AUTO_FAN_SPEED 255 #define CHAMBER_AUTO_FAN_TEMPERATURE 28
#define CHAMBER_AUTO_FAN_SPEED 255
#define COOLER_AUTO_FAN_TEMPERATURE 18
#define COOLER_AUTO_FAN_SPEED 255
/** /**
* Hotend Cooling Fans tachometers * Hotend Cooling Fans tachometers

22
config/examples/Anet/A9/Configuration_adv.h
View file

@ -584,6 +584,9 @@
#define CONTROLLERFAN_SPEED_IDLE 0 // (0-255) Idle speed, used when motors are disabled #define CONTROLLERFAN_SPEED_IDLE 0 // (0-255) Idle speed, used when motors are disabled
#define CONTROLLERFAN_IDLE_TIME 60 // (seconds) Extra time to keep the fan running after disabling motors #define CONTROLLERFAN_IDLE_TIME 60 // (seconds) Extra time to keep the fan running after disabling motors
//#define CONTROLLERFAN_KICKSTART_TIME 100 // (ms)
//#define CONTROLLERFAN_KICKSTART_POWER 180 // 64-255
// Use TEMP_SENSOR_BOARD as a trigger for enabling the controller fan // Use TEMP_SENSOR_BOARD as a trigger for enabling the controller fan
//#define CONTROLLER_FAN_MIN_BOARD_TEMP 40 // (°C) Turn on the fan if the board reaches this temperature //#define CONTROLLER_FAN_MIN_BOARD_TEMP 40 // (°C) Turn on the fan if the board reaches this temperature
@ -602,8 +605,8 @@
* gets it spinning reliably for a short time before setting the requested speed. * gets it spinning reliably for a short time before setting the requested speed.
* (Does not work on Sanguinololu with FAN_SOFT_PWM.) * (Does not work on Sanguinololu with FAN_SOFT_PWM.)
*/ */
//#define FAN_KICKSTART_TIME 100 // (ms) //#define EFAN_KICKSTART_TIME 100 // (ms)
//#define FAN_KICKSTART_POWER 180 // 64-255 //#define EFAN_KICKSTART_POWER 180 // 64-255
// Some coolers may require a non-zero "off" state. // Some coolers may require a non-zero "off" state.
//#define FAN_OFF_PWM 1 //#define FAN_OFF_PWM 1
@ -692,12 +695,15 @@
#define CHAMBER_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1
#define COOLER_AUTO_FAN_PIN -1 #define COOLER_AUTO_FAN_PIN -1
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50
#define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 is full speed
#define CHAMBER_AUTO_FAN_TEMPERATURE 30 //#define EXTRUDER_AUTO_FAN_KICKSTART_TIME 100 // (ms)
#define CHAMBER_AUTO_FAN_SPEED 255 //#define EXTRUDER_AUTO_FAN_KICKSTART_POWER 180 // 64-255
#define COOLER_AUTO_FAN_TEMPERATURE 18
#define COOLER_AUTO_FAN_SPEED 255 #define CHAMBER_AUTO_FAN_TEMPERATURE 28
#define CHAMBER_AUTO_FAN_SPEED 255
#define COOLER_AUTO_FAN_TEMPERATURE 18
#define COOLER_AUTO_FAN_SPEED 255
/** /**
* Hotend Cooling Fans tachometers * Hotend Cooling Fans tachometers

22
config/examples/Anet/E10/Configuration_adv.h
View file

@ -584,6 +584,9 @@
#define CONTROLLERFAN_SPEED_IDLE 0 // (0-255) Idle speed, used when motors are disabled #define CONTROLLERFAN_SPEED_IDLE 0 // (0-255) Idle speed, used when motors are disabled
#define CONTROLLERFAN_IDLE_TIME 60 // (seconds) Extra time to keep the fan running after disabling motors #define CONTROLLERFAN_IDLE_TIME 60 // (seconds) Extra time to keep the fan running after disabling motors
//#define CONTROLLERFAN_KICKSTART_TIME 100 // (ms)
//#define CONTROLLERFAN_KICKSTART_POWER 180 // 64-255
// Use TEMP_SENSOR_BOARD as a trigger for enabling the controller fan // Use TEMP_SENSOR_BOARD as a trigger for enabling the controller fan
//#define CONTROLLER_FAN_MIN_BOARD_TEMP 40 // (°C) Turn on the fan if the board reaches this temperature //#define CONTROLLER_FAN_MIN_BOARD_TEMP 40 // (°C) Turn on the fan if the board reaches this temperature
@ -602,8 +605,8 @@
* gets it spinning reliably for a short time before setting the requested speed. * gets it spinning reliably for a short time before setting the requested speed.
* (Does not work on Sanguinololu with FAN_SOFT_PWM.) * (Does not work on Sanguinololu with FAN_SOFT_PWM.)
*/ */
//#define FAN_KICKSTART_TIME 100 // (ms) //#define EFAN_KICKSTART_TIME 100 // (ms)
//#define FAN_KICKSTART_POWER 180 // 64-255 //#define EFAN_KICKSTART_POWER 180 // 64-255
// Some coolers may require a non-zero "off" state. // Some coolers may require a non-zero "off" state.
//#define FAN_OFF_PWM 1 //#define FAN_OFF_PWM 1
@ -692,12 +695,15 @@
#define CHAMBER_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1
#define COOLER_AUTO_FAN_PIN -1 #define COOLER_AUTO_FAN_PIN -1
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50
#define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 is full speed
#define CHAMBER_AUTO_FAN_TEMPERATURE 30 //#define EXTRUDER_AUTO_FAN_KICKSTART_TIME 100 // (ms)
#define CHAMBER_AUTO_FAN_SPEED 255 //#define EXTRUDER_AUTO_FAN_KICKSTART_POWER 180 // 64-255
#define COOLER_AUTO_FAN_TEMPERATURE 18
#define COOLER_AUTO_FAN_SPEED 255 #define CHAMBER_AUTO_FAN_TEMPERATURE 28
#define CHAMBER_AUTO_FAN_SPEED 255
#define COOLER_AUTO_FAN_TEMPERATURE 18
#define COOLER_AUTO_FAN_SPEED 255
/** /**
* Hotend Cooling Fans tachometers * Hotend Cooling Fans tachometers

22
config/examples/Anet/E16/BTT SKR 1.3/Configuration_adv.h
View file

@ -584,6 +584,9 @@
#define CONTROLLERFAN_SPEED_IDLE 0 // (0-255) Idle speed, used when motors are disabled #define CONTROLLERFAN_SPEED_IDLE 0 // (0-255) Idle speed, used when motors are disabled
#define CONTROLLERFAN_IDLE_TIME 60 // (seconds) Extra time to keep the fan running after disabling motors #define CONTROLLERFAN_IDLE_TIME 60 // (seconds) Extra time to keep the fan running after disabling motors
//#define CONTROLLERFAN_KICKSTART_TIME 100 // (ms)
//#define CONTROLLERFAN_KICKSTART_POWER 180 // 64-255
// Use TEMP_SENSOR_BOARD as a trigger for enabling the controller fan // Use TEMP_SENSOR_BOARD as a trigger for enabling the controller fan
//#define CONTROLLER_FAN_MIN_BOARD_TEMP 40 // (°C) Turn on the fan if the board reaches this temperature //#define CONTROLLER_FAN_MIN_BOARD_TEMP 40 // (°C) Turn on the fan if the board reaches this temperature
@ -602,8 +605,8 @@
* gets it spinning reliably for a short time before setting the requested speed. * gets it spinning reliably for a short time before setting the requested speed.
* (Does not work on Sanguinololu with FAN_SOFT_PWM.) * (Does not work on Sanguinololu with FAN_SOFT_PWM.)
*/ */
//#define FAN_KICKSTART_TIME 100 // (ms) //#define EFAN_KICKSTART_TIME 100 // (ms)
//#define FAN_KICKSTART_POWER 180 // 64-255 //#define EFAN_KICKSTART_POWER 180 // 64-255
// Some coolers may require a non-zero "off" state. // Some coolers may require a non-zero "off" state.
//#define FAN_OFF_PWM 1 //#define FAN_OFF_PWM 1
@ -692,12 +695,15 @@
#define CHAMBER_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1
#define COOLER_AUTO_FAN_PIN -1 #define COOLER_AUTO_FAN_PIN -1
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50
#define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 is full speed
#define CHAMBER_AUTO_FAN_TEMPERATURE 30 //#define EXTRUDER_AUTO_FAN_KICKSTART_TIME 100 // (ms)
#define CHAMBER_AUTO_FAN_SPEED 255 //#define EXTRUDER_AUTO_FAN_KICKSTART_POWER 180 // 64-255
#define COOLER_AUTO_FAN_TEMPERATURE 18
#define COOLER_AUTO_FAN_SPEED 255 #define CHAMBER_AUTO_FAN_TEMPERATURE 28
#define CHAMBER_AUTO_FAN_SPEED 255
#define COOLER_AUTO_FAN_TEMPERATURE 18
#define COOLER_AUTO_FAN_SPEED 255
/** /**
* Hotend Cooling Fans tachometers * Hotend Cooling Fans tachometers

22
config/examples/Anet/E16/Stock/Configuration_adv.h
View file

@ -584,6 +584,9 @@
#define CONTROLLERFAN_SPEED_IDLE 0 // (0-255) Idle speed, used when motors are disabled #define CONTROLLERFAN_SPEED_IDLE 0 // (0-255) Idle speed, used when motors are disabled
#define CONTROLLERFAN_IDLE_TIME 60 // (seconds) Extra time to keep the fan running after disabling motors #define CONTROLLERFAN_IDLE_TIME 60 // (seconds) Extra time to keep the fan running after disabling motors
//#define CONTROLLERFAN_KICKSTART_TIME 100 // (ms)
//#define CONTROLLERFAN_KICKSTART_POWER 180 // 64-255
// Use TEMP_SENSOR_BOARD as a trigger for enabling the controller fan // Use TEMP_SENSOR_BOARD as a trigger for enabling the controller fan
//#define CONTROLLER_FAN_MIN_BOARD_TEMP 40 // (°C) Turn on the fan if the board reaches this temperature //#define CONTROLLER_FAN_MIN_BOARD_TEMP 40 // (°C) Turn on the fan if the board reaches this temperature
@ -602,8 +605,8 @@
* gets it spinning reliably for a short time before setting the requested speed. * gets it spinning reliably for a short time before setting the requested speed.
* (Does not work on Sanguinololu with FAN_SOFT_PWM.) * (Does not work on Sanguinololu with FAN_SOFT_PWM.)
*/ */
//#define FAN_KICKSTART_TIME 100 // (ms) //#define EFAN_KICKSTART_TIME 100 // (ms)
//#define FAN_KICKSTART_POWER 180 // 64-255 //#define EFAN_KICKSTART_POWER 180 // 64-255
// Some coolers may require a non-zero "off" state. // Some coolers may require a non-zero "off" state.
//#define FAN_OFF_PWM 1 //#define FAN_OFF_PWM 1
@ -692,12 +695,15 @@
#define CHAMBER_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1
#define COOLER_AUTO_FAN_PIN -1 #define COOLER_AUTO_FAN_PIN -1
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50
#define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 is full speed
#define CHAMBER_AUTO_FAN_TEMPERATURE 30 //#define EXTRUDER_AUTO_FAN_KICKSTART_TIME 100 // (ms)
#define CHAMBER_AUTO_FAN_SPEED 255 //#define EXTRUDER_AUTO_FAN_KICKSTART_POWER 180 // 64-255
#define COOLER_AUTO_FAN_TEMPERATURE 18
#define COOLER_AUTO_FAN_SPEED 255 #define CHAMBER_AUTO_FAN_TEMPERATURE 28
#define CHAMBER_AUTO_FAN_SPEED 255
#define COOLER_AUTO_FAN_TEMPERATURE 18
#define COOLER_AUTO_FAN_SPEED 255
/** /**
* Hotend Cooling Fans tachometers * Hotend Cooling Fans tachometers

22
config/examples/Anet/ET4+/Configuration_adv.h
View file

@ -584,6 +584,9 @@
#define CONTROLLERFAN_SPEED_IDLE 0 // (0-255) Idle speed, used when motors are disabled #define CONTROLLERFAN_SPEED_IDLE 0 // (0-255) Idle speed, used when motors are disabled
#define CONTROLLERFAN_IDLE_TIME 60 // (seconds) Extra time to keep the fan running after disabling motors #define CONTROLLERFAN_IDLE_TIME 60 // (seconds) Extra time to keep the fan running after disabling motors
//#define CONTROLLERFAN_KICKSTART_TIME 100 // (ms)
//#define CONTROLLERFAN_KICKSTART_POWER 180 // 64-255
// Use TEMP_SENSOR_BOARD as a trigger for enabling the controller fan // Use TEMP_SENSOR_BOARD as a trigger for enabling the controller fan
//#define CONTROLLER_FAN_MIN_BOARD_TEMP 40 // (°C) Turn on the fan if the board reaches this temperature //#define CONTROLLER_FAN_MIN_BOARD_TEMP 40 // (°C) Turn on the fan if the board reaches this temperature
@ -602,8 +605,8 @@
* gets it spinning reliably for a short time before setting the requested speed. * gets it spinning reliably for a short time before setting the requested speed.
* (Does not work on Sanguinololu with FAN_SOFT_PWM.) * (Does not work on Sanguinololu with FAN_SOFT_PWM.)
*/ */
//#define FAN_KICKSTART_TIME 100 // (ms) //#define EFAN_KICKSTART_TIME 100 // (ms)
//#define FAN_KICKSTART_POWER 180 // 64-255 //#define EFAN_KICKSTART_POWER 180 // 64-255
// Some coolers may require a non-zero "off" state. // Some coolers may require a non-zero "off" state.
//#define FAN_OFF_PWM 1 //#define FAN_OFF_PWM 1
@ -692,12 +695,15 @@
#define CHAMBER_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1
#define COOLER_AUTO_FAN_PIN -1 #define COOLER_AUTO_FAN_PIN -1
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50
#define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 is full speed
#define CHAMBER_AUTO_FAN_TEMPERATURE 30 //#define EXTRUDER_AUTO_FAN_KICKSTART_TIME 100 // (ms)
#define CHAMBER_AUTO_FAN_SPEED 255 //#define EXTRUDER_AUTO_FAN_KICKSTART_POWER 180 // 64-255
#define COOLER_AUTO_FAN_TEMPERATURE 18
#define COOLER_AUTO_FAN_SPEED 255 #define CHAMBER_AUTO_FAN_TEMPERATURE 28
#define CHAMBER_AUTO_FAN_SPEED 255
#define COOLER_AUTO_FAN_TEMPERATURE 18
#define COOLER_AUTO_FAN_SPEED 255
/** /**
* Hotend Cooling Fans tachometers * Hotend Cooling Fans tachometers

22
config/examples/Anet/ET4-Pro/Configuration_adv.h
View file

@ -584,6 +584,9 @@
#define CONTROLLERFAN_SPEED_IDLE 0 // (0-255) Idle speed, used when motors are disabled #define CONTROLLERFAN_SPEED_IDLE 0 // (0-255) Idle speed, used when motors are disabled
#define CONTROLLERFAN_IDLE_TIME 60 // (seconds) Extra time to keep the fan running after disabling motors #define CONTROLLERFAN_IDLE_TIME 60 // (seconds) Extra time to keep the fan running after disabling motors
//#define CONTROLLERFAN_KICKSTART_TIME 100 // (ms)
//#define CONTROLLERFAN_KICKSTART_POWER 180 // 64-255
// Use TEMP_SENSOR_BOARD as a trigger for enabling the controller fan // Use TEMP_SENSOR_BOARD as a trigger for enabling the controller fan
//#define CONTROLLER_FAN_MIN_BOARD_TEMP 40 // (°C) Turn on the fan if the board reaches this temperature //#define CONTROLLER_FAN_MIN_BOARD_TEMP 40 // (°C) Turn on the fan if the board reaches this temperature
@ -602,8 +605,8 @@
* gets it spinning reliably for a short time before setting the requested speed. * gets it spinning reliably for a short time before setting the requested speed.
* (Does not work on Sanguinololu with FAN_SOFT_PWM.) * (Does not work on Sanguinololu with FAN_SOFT_PWM.)
*/ */
//#define FAN_KICKSTART_TIME 100 // (ms) //#define EFAN_KICKSTART_TIME 100 // (ms)
//#define FAN_KICKSTART_POWER 180 // 64-255 //#define EFAN_KICKSTART_POWER 180 // 64-255
// Some coolers may require a non-zero "off" state. // Some coolers may require a non-zero "off" state.
//#define FAN_OFF_PWM 1 //#define FAN_OFF_PWM 1
@ -692,12 +695,15 @@
#define CHAMBER_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1
#define COOLER_AUTO_FAN_PIN -1 #define COOLER_AUTO_FAN_PIN -1
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50
#define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 is full speed
#define CHAMBER_AUTO_FAN_TEMPERATURE 30 //#define EXTRUDER_AUTO_FAN_KICKSTART_TIME 100 // (ms)
#define CHAMBER_AUTO_FAN_SPEED 255 //#define EXTRUDER_AUTO_FAN_KICKSTART_POWER 180 // 64-255
#define COOLER_AUTO_FAN_TEMPERATURE 18
#define COOLER_AUTO_FAN_SPEED 255 #define CHAMBER_AUTO_FAN_TEMPERATURE 28
#define CHAMBER_AUTO_FAN_SPEED 255
#define COOLER_AUTO_FAN_TEMPERATURE 18
#define COOLER_AUTO_FAN_SPEED 255
/** /**
* Hotend Cooling Fans tachometers * Hotend Cooling Fans tachometers

22
config/examples/Anet/ET4/Configuration_adv.h
View file

@ -584,6 +584,9 @@
#define CONTROLLERFAN_SPEED_IDLE 0 // (0-255) Idle speed, used when motors are disabled #define CONTROLLERFAN_SPEED_IDLE 0 // (0-255) Idle speed, used when motors are disabled
#define CONTROLLERFAN_IDLE_TIME 60 // (seconds) Extra time to keep the fan running after disabling motors #define CONTROLLERFAN_IDLE_TIME 60 // (seconds) Extra time to keep the fan running after disabling motors
//#define CONTROLLERFAN_KICKSTART_TIME 100 // (ms)
//#define CONTROLLERFAN_KICKSTART_POWER 180 // 64-255
// Use TEMP_SENSOR_BOARD as a trigger for enabling the controller fan // Use TEMP_SENSOR_BOARD as a trigger for enabling the controller fan
//#define CONTROLLER_FAN_MIN_BOARD_TEMP 40 // (°C) Turn on the fan if the board reaches this temperature //#define CONTROLLER_FAN_MIN_BOARD_TEMP 40 // (°C) Turn on the fan if the board reaches this temperature
@ -602,8 +605,8 @@
* gets it spinning reliably for a short time before setting the requested speed. * gets it spinning reliably for a short time before setting the requested speed.
* (Does not work on Sanguinololu with FAN_SOFT_PWM.) * (Does not work on Sanguinololu with FAN_SOFT_PWM.)
*/ */
//#define FAN_KICKSTART_TIME 100 // (ms) //#define EFAN_KICKSTART_TIME 100 // (ms)
//#define FAN_KICKSTART_POWER 180 // 64-255 //#define EFAN_KICKSTART_POWER 180 // 64-255
// Some coolers may require a non-zero "off" state. // Some coolers may require a non-zero "off" state.
//#define FAN_OFF_PWM 1 //#define FAN_OFF_PWM 1
@ -692,12 +695,15 @@
#define CHAMBER_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1
#define COOLER_AUTO_FAN_PIN -1 #define COOLER_AUTO_FAN_PIN -1
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50
#define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 is full speed
#define CHAMBER_AUTO_FAN_TEMPERATURE 30 //#define EXTRUDER_AUTO_FAN_KICKSTART_TIME 100 // (ms)
#define CHAMBER_AUTO_FAN_SPEED 255 //#define EXTRUDER_AUTO_FAN_KICKSTART_POWER 180 // 64-255
#define COOLER_AUTO_FAN_TEMPERATURE 18
#define COOLER_AUTO_FAN_SPEED 255 #define CHAMBER_AUTO_FAN_TEMPERATURE 28
#define CHAMBER_AUTO_FAN_SPEED 255
#define COOLER_AUTO_FAN_TEMPERATURE 18
#define COOLER_AUTO_FAN_SPEED 255
/** /**
* Hotend Cooling Fans tachometers * Hotend Cooling Fans tachometers

22
config/examples/Anet/ET4X/Configuration_adv.h
View file

@ -584,6 +584,9 @@
#define CONTROLLERFAN_SPEED_IDLE 0 // (0-255) Idle speed, used when motors are disabled #define CONTROLLERFAN_SPEED_IDLE 0 // (0-255) Idle speed, used when motors are disabled
#define CONTROLLERFAN_IDLE_TIME 60 // (seconds) Extra time to keep the fan running after disabling motors #define CONTROLLERFAN_IDLE_TIME 60 // (seconds) Extra time to keep the fan running after disabling motors
//#define CONTROLLERFAN_KICKSTART_TIME 100 // (ms)
//#define CONTROLLERFAN_KICKSTART_POWER 180 // 64-255
// Use TEMP_SENSOR_BOARD as a trigger for enabling the controller fan // Use TEMP_SENSOR_BOARD as a trigger for enabling the controller fan
//#define CONTROLLER_FAN_MIN_BOARD_TEMP 40 // (°C) Turn on the fan if the board reaches this temperature //#define CONTROLLER_FAN_MIN_BOARD_TEMP 40 // (°C) Turn on the fan if the board reaches this temperature
@ -602,8 +605,8 @@
* gets it spinning reliably for a short time before setting the requested speed. * gets it spinning reliably for a short time before setting the requested speed.
* (Does not work on Sanguinololu with FAN_SOFT_PWM.) * (Does not work on Sanguinololu with FAN_SOFT_PWM.)
*/ */
//#define FAN_KICKSTART_TIME 100 // (ms) //#define EFAN_KICKSTART_TIME 100 // (ms)
//#define FAN_KICKSTART_POWER 180 // 64-255 //#define EFAN_KICKSTART_POWER 180 // 64-255
// Some coolers may require a non-zero "off" state. // Some coolers may require a non-zero "off" state.
//#define FAN_OFF_PWM 1 //#define FAN_OFF_PWM 1
@ -692,12 +695,15 @@
#define CHAMBER_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1
#define COOLER_AUTO_FAN_PIN -1 #define COOLER_AUTO_FAN_PIN -1
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50
#define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 is full speed
#define CHAMBER_AUTO_FAN_TEMPERATURE 30 //#define EXTRUDER_AUTO_FAN_KICKSTART_TIME 100 // (ms)
#define CHAMBER_AUTO_FAN_SPEED 255 //#define EXTRUDER_AUTO_FAN_KICKSTART_POWER 180 // 64-255
#define COOLER_AUTO_FAN_TEMPERATURE 18
#define COOLER_AUTO_FAN_SPEED 255 #define CHAMBER_AUTO_FAN_TEMPERATURE 28
#define CHAMBER_AUTO_FAN_SPEED 255
#define COOLER_AUTO_FAN_TEMPERATURE 18
#define COOLER_AUTO_FAN_SPEED 255
/** /**
* Hotend Cooling Fans tachometers * Hotend Cooling Fans tachometers

22
config/examples/Anet/ET5-Pro/Configuration_adv.h
View file

@ -584,6 +584,9 @@
#define CONTROLLERFAN_SPEED_IDLE 0 // (0-255) Idle speed, used when motors are disabled #define CONTROLLERFAN_SPEED_IDLE 0 // (0-255) Idle speed, used when motors are disabled
#define CONTROLLERFAN_IDLE_TIME 60 // (seconds) Extra time to keep the fan running after disabling motors #define CONTROLLERFAN_IDLE_TIME 60 // (seconds) Extra time to keep the fan running after disabling motors
//#define CONTROLLERFAN_KICKSTART_TIME 100 // (ms)
//#define CONTROLLERFAN_KICKSTART_POWER 180 // 64-255
// Use TEMP_SENSOR_BOARD as a trigger for enabling the controller fan // Use TEMP_SENSOR_BOARD as a trigger for enabling the controller fan
//#define CONTROLLER_FAN_MIN_BOARD_TEMP 40 // (°C) Turn on the fan if the board reaches this temperature //#define CONTROLLER_FAN_MIN_BOARD_TEMP 40 // (°C) Turn on the fan if the board reaches this temperature
@ -602,8 +605,8 @@
* gets it spinning reliably for a short time before setting the requested speed. * gets it spinning reliably for a short time before setting the requested speed.
* (Does not work on Sanguinololu with FAN_SOFT_PWM.) * (Does not work on Sanguinololu with FAN_SOFT_PWM.)
*/ */
//#define FAN_KICKSTART_TIME 100 // (ms) //#define EFAN_KICKSTART_TIME 100 // (ms)
//#define FAN_KICKSTART_POWER 180 // 64-255 //#define EFAN_KICKSTART_POWER 180 // 64-255
// Some coolers may require a non-zero "off" state. // Some coolers may require a non-zero "off" state.
//#define FAN_OFF_PWM 1 //#define FAN_OFF_PWM 1
@ -692,12 +695,15 @@
#define CHAMBER_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1
#define COOLER_AUTO_FAN_PIN -1 #define COOLER_AUTO_FAN_PIN -1
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50
#define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 is full speed
#define CHAMBER_AUTO_FAN_TEMPERATURE 30 //#define EXTRUDER_AUTO_FAN_KICKSTART_TIME 100 // (ms)
#define CHAMBER_AUTO_FAN_SPEED 255 //#define EXTRUDER_AUTO_FAN_KICKSTART_POWER 180 // 64-255
#define COOLER_AUTO_FAN_TEMPERATURE 18
#define COOLER_AUTO_FAN_SPEED 255 #define CHAMBER_AUTO_FAN_TEMPERATURE 28
#define CHAMBER_AUTO_FAN_SPEED 255
#define COOLER_AUTO_FAN_TEMPERATURE 18
#define COOLER_AUTO_FAN_SPEED 255
/** /**
* Hotend Cooling Fans tachometers * Hotend Cooling Fans tachometers

22
config/examples/Anet/ET5/Configuration_adv.h
View file

@ -584,6 +584,9 @@
#define CONTROLLERFAN_SPEED_IDLE 0 // (0-255) Idle speed, used when motors are disabled #define CONTROLLERFAN_SPEED_IDLE 0 // (0-255) Idle speed, used when motors are disabled
#define CONTROLLERFAN_IDLE_TIME 60 // (seconds) Extra time to keep the fan running after disabling motors #define CONTROLLERFAN_IDLE_TIME 60 // (seconds) Extra time to keep the fan running after disabling motors
//#define CONTROLLERFAN_KICKSTART_TIME 100 // (ms)
//#define CONTROLLERFAN_KICKSTART_POWER 180 // 64-255
// Use TEMP_SENSOR_BOARD as a trigger for enabling the controller fan // Use TEMP_SENSOR_BOARD as a trigger for enabling the controller fan
//#define CONTROLLER_FAN_MIN_BOARD_TEMP 40 // (°C) Turn on the fan if the board reaches this temperature //#define CONTROLLER_FAN_MIN_BOARD_TEMP 40 // (°C) Turn on the fan if the board reaches this temperature
@ -602,8 +605,8 @@
* gets it spinning reliably for a short time before setting the requested speed. * gets it spinning reliably for a short time before setting the requested speed.
* (Does not work on Sanguinololu with FAN_SOFT_PWM.) * (Does not work on Sanguinololu with FAN_SOFT_PWM.)
*/ */
//#define FAN_KICKSTART_TIME 100 // (ms) //#define EFAN_KICKSTART_TIME 100 // (ms)
//#define FAN_KICKSTART_POWER 180 // 64-255 //#define EFAN_KICKSTART_POWER 180 // 64-255
// Some coolers may require a non-zero "off" state. // Some coolers may require a non-zero "off" state.
//#define FAN_OFF_PWM 1 //#define FAN_OFF_PWM 1
@ -692,12 +695,15 @@
#define CHAMBER_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1
#define COOLER_AUTO_FAN_PIN -1 #define COOLER_AUTO_FAN_PIN -1
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50
#define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 is full speed
#define CHAMBER_AUTO_FAN_TEMPERATURE 30 //#define EXTRUDER_AUTO_FAN_KICKSTART_TIME 100 // (ms)
#define CHAMBER_AUTO_FAN_SPEED 255 //#define EXTRUDER_AUTO_FAN_KICKSTART_POWER 180 // 64-255
#define COOLER_AUTO_FAN_TEMPERATURE 18
#define COOLER_AUTO_FAN_SPEED 255 #define CHAMBER_AUTO_FAN_TEMPERATURE 28
#define CHAMBER_AUTO_FAN_SPEED 255
#define COOLER_AUTO_FAN_TEMPERATURE 18
#define COOLER_AUTO_FAN_SPEED 255
/** /**
* Hotend Cooling Fans tachometers * Hotend Cooling Fans tachometers

22
config/examples/Anet/ET5X/Configuration_adv.h
View file

@ -584,6 +584,9 @@
#define CONTROLLERFAN_SPEED_IDLE 0 // (0-255) Idle speed, used when motors are disabled #define CONTROLLERFAN_SPEED_IDLE 0 // (0-255) Idle speed, used when motors are disabled
#define CONTROLLERFAN_IDLE_TIME 60 // (seconds) Extra time to keep the fan running after disabling motors #define CONTROLLERFAN_IDLE_TIME 60 // (seconds) Extra time to keep the fan running after disabling motors
//#define CONTROLLERFAN_KICKSTART_TIME 100 // (ms)
//#define CONTROLLERFAN_KICKSTART_POWER 180 // 64-255
// Use TEMP_SENSOR_BOARD as a trigger for enabling the controller fan // Use TEMP_SENSOR_BOARD as a trigger for enabling the controller fan
//#define CONTROLLER_FAN_MIN_BOARD_TEMP 40 // (°C) Turn on the fan if the board reaches this temperature //#define CONTROLLER_FAN_MIN_BOARD_TEMP 40 // (°C) Turn on the fan if the board reaches this temperature
@ -602,8 +605,8 @@
* gets it spinning reliably for a short time before setting the requested speed. * gets it spinning reliably for a short time before setting the requested speed.
* (Does not work on Sanguinololu with FAN_SOFT_PWM.) * (Does not work on Sanguinololu with FAN_SOFT_PWM.)
*/ */
//#define FAN_KICKSTART_TIME 100 // (ms) //#define EFAN_KICKSTART_TIME 100 // (ms)
//#define FAN_KICKSTART_POWER 180 // 64-255 //#define EFAN_KICKSTART_POWER 180 // 64-255
// Some coolers may require a non-zero "off" state. // Some coolers may require a non-zero "off" state.
//#define FAN_OFF_PWM 1 //#define FAN_OFF_PWM 1
@ -692,12 +695,15 @@
#define CHAMBER_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1
#define COOLER_AUTO_FAN_PIN -1 #define COOLER_AUTO_FAN_PIN -1
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50
#define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 is full speed
#define CHAMBER_AUTO_FAN_TEMPERATURE 30 //#define EXTRUDER_AUTO_FAN_KICKSTART_TIME 100 // (ms)
#define CHAMBER_AUTO_FAN_SPEED 255 //#define EXTRUDER_AUTO_FAN_KICKSTART_POWER 180 // 64-255
#define COOLER_AUTO_FAN_TEMPERATURE 18
#define COOLER_AUTO_FAN_SPEED 255 #define CHAMBER_AUTO_FAN_TEMPERATURE 28
#define CHAMBER_AUTO_FAN_SPEED 255
#define COOLER_AUTO_FAN_TEMPERATURE 18
#define COOLER_AUTO_FAN_SPEED 255
/** /**
* Hotend Cooling Fans tachometers * Hotend Cooling Fans tachometers

22
config/examples/AnyCubic/Chiron/Configuration_adv.h
View file

@ -584,6 +584,9 @@
#define CONTROLLERFAN_SPEED_IDLE 0 // (0-255) Idle speed, used when motors are disabled #define CONTROLLERFAN_SPEED_IDLE 0 // (0-255) Idle speed, used when motors are disabled
#define CONTROLLERFAN_IDLE_TIME 60 // (seconds) Extra time to keep the fan running after disabling motors #define CONTROLLERFAN_IDLE_TIME 60 // (seconds) Extra time to keep the fan running after disabling motors
//#define CONTROLLERFAN_KICKSTART_TIME 100 // (ms)
//#define CONTROLLERFAN_KICKSTART_POWER 180 // 64-255
// Use TEMP_SENSOR_BOARD as a trigger for enabling the controller fan // Use TEMP_SENSOR_BOARD as a trigger for enabling the controller fan
//#define CONTROLLER_FAN_MIN_BOARD_TEMP 40 // (°C) Turn on the fan if the board reaches this temperature //#define CONTROLLER_FAN_MIN_BOARD_TEMP 40 // (°C) Turn on the fan if the board reaches this temperature
@ -602,8 +605,8 @@
* gets it spinning reliably for a short time before setting the requested speed. * gets it spinning reliably for a short time before setting the requested speed.
* (Does not work on Sanguinololu with FAN_SOFT_PWM.) * (Does not work on Sanguinololu with FAN_SOFT_PWM.)
*/ */
//#define FAN_KICKSTART_TIME 100 // (ms) //#define EFAN_KICKSTART_TIME 100 // (ms)
//#define FAN_KICKSTART_POWER 180 // 64-255 //#define EFAN_KICKSTART_POWER 180 // 64-255
// Some coolers may require a non-zero "off" state. // Some coolers may require a non-zero "off" state.
//#define FAN_OFF_PWM 1 //#define FAN_OFF_PWM 1
@ -692,12 +695,15 @@
#define CHAMBER_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1
#define COOLER_AUTO_FAN_PIN -1 #define COOLER_AUTO_FAN_PIN -1
#define EXTRUDER_AUTO_FAN_TEMPERATURE 80 #define EXTRUDER_AUTO_FAN_TEMPERATURE 80
#define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 is full speed
#define CHAMBER_AUTO_FAN_TEMPERATURE 30 //#define EXTRUDER_AUTO_FAN_KICKSTART_TIME 100 // (ms)
#define CHAMBER_AUTO_FAN_SPEED 255 //#define EXTRUDER_AUTO_FAN_KICKSTART_POWER 180 // 64-255
#define COOLER_AUTO_FAN_TEMPERATURE 18
#define COOLER_AUTO_FAN_SPEED 255 #define CHAMBER_AUTO_FAN_TEMPERATURE 28
#define CHAMBER_AUTO_FAN_SPEED 255
#define COOLER_AUTO_FAN_TEMPERATURE 18
#define COOLER_AUTO_FAN_SPEED 255
/** /**
* Hotend Cooling Fans tachometers * Hotend Cooling Fans tachometers

22
config/examples/AnyCubic/Mega Zero 2.0/Anycubic V1/Configuration_adv.h
View file

@ -584,6 +584,9 @@
#define CONTROLLERFAN_SPEED_IDLE 0 // (0-255) Idle speed, used when motors are disabled #define CONTROLLERFAN_SPEED_IDLE 0 // (0-255) Idle speed, used when motors are disabled
#define CONTROLLERFAN_IDLE_TIME 60 // (seconds) Extra time to keep the fan running after disabling motors #define CONTROLLERFAN_IDLE_TIME 60 // (seconds) Extra time to keep the fan running after disabling motors
//#define CONTROLLERFAN_KICKSTART_TIME 100 // (ms)
//#define CONTROLLERFAN_KICKSTART_POWER 180 // 64-255
// Use TEMP_SENSOR_BOARD as a trigger for enabling the controller fan // Use TEMP_SENSOR_BOARD as a trigger for enabling the controller fan
//#define CONTROLLER_FAN_MIN_BOARD_TEMP 40 // (°C) Turn on the fan if the board reaches this temperature //#define CONTROLLER_FAN_MIN_BOARD_TEMP 40 // (°C) Turn on the fan if the board reaches this temperature
@ -602,8 +605,8 @@
* gets it spinning reliably for a short time before setting the requested speed. * gets it spinning reliably for a short time before setting the requested speed.
* (Does not work on Sanguinololu with FAN_SOFT_PWM.) * (Does not work on Sanguinololu with FAN_SOFT_PWM.)
*/ */
//#define FAN_KICKSTART_TIME 100 // (ms) //#define EFAN_KICKSTART_TIME 100 // (ms)
//#define FAN_KICKSTART_POWER 180 // 64-255 //#define EFAN_KICKSTART_POWER 180 // 64-255
// Some coolers may require a non-zero "off" state. // Some coolers may require a non-zero "off" state.
//#define FAN_OFF_PWM 1 //#define FAN_OFF_PWM 1
@ -692,12 +695,15 @@
#define CHAMBER_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1
#define COOLER_AUTO_FAN_PIN -1 #define COOLER_AUTO_FAN_PIN -1
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50
#define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 is full speed
#define CHAMBER_AUTO_FAN_TEMPERATURE 30 //#define EXTRUDER_AUTO_FAN_KICKSTART_TIME 100 // (ms)
#define CHAMBER_AUTO_FAN_SPEED 255 //#define EXTRUDER_AUTO_FAN_KICKSTART_POWER 180 // 64-255
#define COOLER_AUTO_FAN_TEMPERATURE 18
#define COOLER_AUTO_FAN_SPEED 255 #define CHAMBER_AUTO_FAN_TEMPERATURE 28
#define CHAMBER_AUTO_FAN_SPEED 255
#define COOLER_AUTO_FAN_TEMPERATURE 18
#define COOLER_AUTO_FAN_SPEED 255
/** /**
* Hotend Cooling Fans tachometers * Hotend Cooling Fans tachometers

22
config/examples/AnyCubic/Mega Zero/Anycubic V1/Configuration_adv.h
View file

@ -584,6 +584,9 @@
#define CONTROLLERFAN_SPEED_IDLE 0 // (0-255) Idle speed, used when motors are disabled #define CONTROLLERFAN_SPEED_IDLE 0 // (0-255) Idle speed, used when motors are disabled
#define CONTROLLERFAN_IDLE_TIME 60 // (seconds) Extra time to keep the fan running after disabling motors #define CONTROLLERFAN_IDLE_TIME 60 // (seconds) Extra time to keep the fan running after disabling motors
//#define CONTROLLERFAN_KICKSTART_TIME 100 // (ms)
//#define CONTROLLERFAN_KICKSTART_POWER 180 // 64-255
// Use TEMP_SENSOR_BOARD as a trigger for enabling the controller fan // Use TEMP_SENSOR_BOARD as a trigger for enabling the controller fan
//#define CONTROLLER_FAN_MIN_BOARD_TEMP 40 // (°C) Turn on the fan if the board reaches this temperature //#define CONTROLLER_FAN_MIN_BOARD_TEMP 40 // (°C) Turn on the fan if the board reaches this temperature
@ -602,8 +605,8 @@
* gets it spinning reliably for a short time before setting the requested speed. * gets it spinning reliably for a short time before setting the requested speed.
* (Does not work on Sanguinololu with FAN_SOFT_PWM.) * (Does not work on Sanguinololu with FAN_SOFT_PWM.)
*/ */
//#define FAN_KICKSTART_TIME 100 // (ms) //#define EFAN_KICKSTART_TIME 100 // (ms)
//#define FAN_KICKSTART_POWER 180 // 64-255 //#define EFAN_KICKSTART_POWER 180 // 64-255
// Some coolers may require a non-zero "off" state. // Some coolers may require a non-zero "off" state.
//#define FAN_OFF_PWM 1 //#define FAN_OFF_PWM 1
@ -692,12 +695,15 @@
#define CHAMBER_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1
#define COOLER_AUTO_FAN_PIN -1 #define COOLER_AUTO_FAN_PIN -1
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50
#define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 is full speed
#define CHAMBER_AUTO_FAN_TEMPERATURE 30 //#define EXTRUDER_AUTO_FAN_KICKSTART_TIME 100 // (ms)
#define CHAMBER_AUTO_FAN_SPEED 255 //#define EXTRUDER_AUTO_FAN_KICKSTART_POWER 180 // 64-255
#define COOLER_AUTO_FAN_TEMPERATURE 18
#define COOLER_AUTO_FAN_SPEED 255 #define CHAMBER_AUTO_FAN_TEMPERATURE 28
#define CHAMBER_AUTO_FAN_SPEED 255
#define COOLER_AUTO_FAN_TEMPERATURE 18
#define COOLER_AUTO_FAN_SPEED 255
/** /**
* Hotend Cooling Fans tachometers * Hotend Cooling Fans tachometers

22
config/examples/AnyCubic/Mega Zero/BigTreeTech SKR Mini MZ V1.0/Configuration_adv.h
View file

@ -584,6 +584,9 @@
#define CONTROLLERFAN_SPEED_IDLE 0 // (0-255) Idle speed, used when motors are disabled #define CONTROLLERFAN_SPEED_IDLE 0 // (0-255) Idle speed, used when motors are disabled
#define CONTROLLERFAN_IDLE_TIME 60 // (seconds) Extra time to keep the fan running after disabling motors #define CONTROLLERFAN_IDLE_TIME 60 // (seconds) Extra time to keep the fan running after disabling motors
//#define CONTROLLERFAN_KICKSTART_TIME 100 // (ms)
//#define CONTROLLERFAN_KICKSTART_POWER 180 // 64-255
// Use TEMP_SENSOR_BOARD as a trigger for enabling the controller fan // Use TEMP_SENSOR_BOARD as a trigger for enabling the controller fan
//#define CONTROLLER_FAN_MIN_BOARD_TEMP 40 // (°C) Turn on the fan if the board reaches this temperature //#define CONTROLLER_FAN_MIN_BOARD_TEMP 40 // (°C) Turn on the fan if the board reaches this temperature
@ -602,8 +605,8 @@
* gets it spinning reliably for a short time before setting the requested speed. * gets it spinning reliably for a short time before setting the requested speed.
* (Does not work on Sanguinololu with FAN_SOFT_PWM.) * (Does not work on Sanguinololu with FAN_SOFT_PWM.)
*/ */
//#define FAN_KICKSTART_TIME 100 // (ms) //#define EFAN_KICKSTART_TIME 100 // (ms)
//#define FAN_KICKSTART_POWER 180 // 64-255 //#define EFAN_KICKSTART_POWER 180 // 64-255
// Some coolers may require a non-zero "off" state. // Some coolers may require a non-zero "off" state.
//#define FAN_OFF_PWM 1 //#define FAN_OFF_PWM 1
@ -692,12 +695,15 @@
#define CHAMBER_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1
#define COOLER_AUTO_FAN_PIN -1 #define COOLER_AUTO_FAN_PIN -1
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50
#define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 is full speed
#define CHAMBER_AUTO_FAN_TEMPERATURE 30 //#define EXTRUDER_AUTO_FAN_KICKSTART_TIME 100 // (ms)
#define CHAMBER_AUTO_FAN_SPEED 255 //#define EXTRUDER_AUTO_FAN_KICKSTART_POWER 180 // 64-255
#define COOLER_AUTO_FAN_TEMPERATURE 18
#define COOLER_AUTO_FAN_SPEED 255 #define CHAMBER_AUTO_FAN_TEMPERATURE 28
#define CHAMBER_AUTO_FAN_SPEED 255
#define COOLER_AUTO_FAN_TEMPERATURE 18
#define COOLER_AUTO_FAN_SPEED 255
/** /**
* Hotend Cooling Fans tachometers * Hotend Cooling Fans tachometers

22
config/examples/AnyCubic/Vyper/Configuration_adv.h
View file

@ -584,6 +584,9 @@
#define CONTROLLERFAN_SPEED_IDLE 0 // (0-255) Idle speed, used when motors are disabled #define CONTROLLERFAN_SPEED_IDLE 0 // (0-255) Idle speed, used when motors are disabled
#define CONTROLLERFAN_IDLE_TIME 60 // (seconds) Extra time to keep the fan running after disabling motors #define CONTROLLERFAN_IDLE_TIME 60 // (seconds) Extra time to keep the fan running after disabling motors
#define CONTROLLERFAN_KICKSTART_TIME 100 // (ms)
#define CONTROLLERFAN_KICKSTART_POWER 180 // 64-255
// Use TEMP_SENSOR_BOARD as a trigger for enabling the controller fan // Use TEMP_SENSOR_BOARD as a trigger for enabling the controller fan
//#define CONTROLLER_FAN_MIN_BOARD_TEMP 40 // (°C) Turn on the fan if the board reaches this temperature //#define CONTROLLER_FAN_MIN_BOARD_TEMP 40 // (°C) Turn on the fan if the board reaches this temperature
@ -602,8 +605,8 @@
* gets it spinning reliably for a short time before setting the requested speed. * gets it spinning reliably for a short time before setting the requested speed.
* (Does not work on Sanguinololu with FAN_SOFT_PWM.) * (Does not work on Sanguinololu with FAN_SOFT_PWM.)
*/ */
#define FAN_KICKSTART_TIME 100 // (ms) #define EFAN_KICKSTART_TIME 100 // (ms)
#define FAN_KICKSTART_POWER 180 // 64-255 #define EFAN_KICKSTART_POWER 180 // 64-255
// Some coolers may require a non-zero "off" state. // Some coolers may require a non-zero "off" state.
//#define FAN_OFF_PWM 1 //#define FAN_OFF_PWM 1
@ -692,12 +695,15 @@
#define CHAMBER_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1
#define COOLER_AUTO_FAN_PIN -1 #define COOLER_AUTO_FAN_PIN -1
#define EXTRUDER_AUTO_FAN_TEMPERATURE 47 #define EXTRUDER_AUTO_FAN_TEMPERATURE 47
#define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 is full speed
#define CHAMBER_AUTO_FAN_TEMPERATURE 30 //#define EXTRUDER_AUTO_FAN_KICKSTART_TIME 100 // (ms)
#define CHAMBER_AUTO_FAN_SPEED 255 //#define EXTRUDER_AUTO_FAN_KICKSTART_POWER 180 // 64-255
#define COOLER_AUTO_FAN_TEMPERATURE 18
#define COOLER_AUTO_FAN_SPEED 255 #define CHAMBER_AUTO_FAN_TEMPERATURE 28
#define CHAMBER_AUTO_FAN_SPEED 255
#define COOLER_AUTO_FAN_TEMPERATURE 18
#define COOLER_AUTO_FAN_SPEED 255
/** /**
* Hotend Cooling Fans tachometers * Hotend Cooling Fans tachometers

22
config/examples/AnyCubic/i3 Mega/Trigorilla AVR/Configuration_adv.h
View file

@ -584,6 +584,9 @@
#define CONTROLLERFAN_SPEED_IDLE 0 // (0-255) Idle speed, used when motors are disabled #define CONTROLLERFAN_SPEED_IDLE 0 // (0-255) Idle speed, used when motors are disabled
#define CONTROLLERFAN_IDLE_TIME 60 // (seconds) Extra time to keep the fan running after disabling motors #define CONTROLLERFAN_IDLE_TIME 60 // (seconds) Extra time to keep the fan running after disabling motors
//#define CONTROLLERFAN_KICKSTART_TIME 100 // (ms)
//#define CONTROLLERFAN_KICKSTART_POWER 180 // 64-255
// Use TEMP_SENSOR_BOARD as a trigger for enabling the controller fan // Use TEMP_SENSOR_BOARD as a trigger for enabling the controller fan
//#define CONTROLLER_FAN_MIN_BOARD_TEMP 40 // (°C) Turn on the fan if the board reaches this temperature //#define CONTROLLER_FAN_MIN_BOARD_TEMP 40 // (°C) Turn on the fan if the board reaches this temperature
@ -602,8 +605,8 @@
* gets it spinning reliably for a short time before setting the requested speed. * gets it spinning reliably for a short time before setting the requested speed.
* (Does not work on Sanguinololu with FAN_SOFT_PWM.) * (Does not work on Sanguinololu with FAN_SOFT_PWM.)
*/ */
//#define FAN_KICKSTART_TIME 100 // (ms) //#define EFAN_KICKSTART_TIME 100 // (ms)
//#define FAN_KICKSTART_POWER 180 // 64-255 //#define EFAN_KICKSTART_POWER 180 // 64-255
// Some coolers may require a non-zero "off" state. // Some coolers may require a non-zero "off" state.
//#define FAN_OFF_PWM 1 //#define FAN_OFF_PWM 1
@ -692,12 +695,15 @@
#define CHAMBER_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1
#define COOLER_AUTO_FAN_PIN -1 #define COOLER_AUTO_FAN_PIN -1
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50
#define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 is full speed
#define CHAMBER_AUTO_FAN_TEMPERATURE 30 //#define EXTRUDER_AUTO_FAN_KICKSTART_TIME 100 // (ms)
#define CHAMBER_AUTO_FAN_SPEED 255 //#define EXTRUDER_AUTO_FAN_KICKSTART_POWER 180 // 64-255
#define COOLER_AUTO_FAN_TEMPERATURE 18
#define COOLER_AUTO_FAN_SPEED 255 #define CHAMBER_AUTO_FAN_TEMPERATURE 28
#define CHAMBER_AUTO_FAN_SPEED 255
#define COOLER_AUTO_FAN_TEMPERATURE 18
#define COOLER_AUTO_FAN_SPEED 255
/** /**
* Hotend Cooling Fans tachometers * Hotend Cooling Fans tachometers

22
config/examples/AnyCubic/i3 Mega/Trigorilla Pro STM32/Configuration_adv.h
View file

@ -584,6 +584,9 @@
#define CONTROLLERFAN_SPEED_IDLE 0 // (0-255) Idle speed, used when motors are disabled #define CONTROLLERFAN_SPEED_IDLE 0 // (0-255) Idle speed, used when motors are disabled
#define CONTROLLERFAN_IDLE_TIME 60 // (seconds) Extra time to keep the fan running after disabling motors #define CONTROLLERFAN_IDLE_TIME 60 // (seconds) Extra time to keep the fan running after disabling motors
//#define CONTROLLERFAN_KICKSTART_TIME 100 // (ms)
//#define CONTROLLERFAN_KICKSTART_POWER 180 // 64-255
// Use TEMP_SENSOR_BOARD as a trigger for enabling the controller fan // Use TEMP_SENSOR_BOARD as a trigger for enabling the controller fan
//#define CONTROLLER_FAN_MIN_BOARD_TEMP 40 // (°C) Turn on the fan if the board reaches this temperature //#define CONTROLLER_FAN_MIN_BOARD_TEMP 40 // (°C) Turn on the fan if the board reaches this temperature
@ -602,8 +605,8 @@
* gets it spinning reliably for a short time before setting the requested speed. * gets it spinning reliably for a short time before setting the requested speed.
* (Does not work on Sanguinololu with FAN_SOFT_PWM.) * (Does not work on Sanguinololu with FAN_SOFT_PWM.)
*/ */
//#define FAN_KICKSTART_TIME 100 // (ms) //#define EFAN_KICKSTART_TIME 100 // (ms)
//#define FAN_KICKSTART_POWER 180 // 64-255 //#define EFAN_KICKSTART_POWER 180 // 64-255
// Some coolers may require a non-zero "off" state. // Some coolers may require a non-zero "off" state.
//#define FAN_OFF_PWM 1 //#define FAN_OFF_PWM 1
@ -692,12 +695,15 @@
#define CHAMBER_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1
#define COOLER_AUTO_FAN_PIN -1 #define COOLER_AUTO_FAN_PIN -1
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50
#define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 is full speed
#define CHAMBER_AUTO_FAN_TEMPERATURE 30 //#define EXTRUDER_AUTO_FAN_KICKSTART_TIME 100 // (ms)
#define CHAMBER_AUTO_FAN_SPEED 255 //#define EXTRUDER_AUTO_FAN_KICKSTART_POWER 180 // 64-255
#define COOLER_AUTO_FAN_TEMPERATURE 18
#define COOLER_AUTO_FAN_SPEED 255 #define CHAMBER_AUTO_FAN_TEMPERATURE 28
#define CHAMBER_AUTO_FAN_SPEED 255
#define COOLER_AUTO_FAN_TEMPERATURE 18
#define COOLER_AUTO_FAN_SPEED 255
/** /**
* Hotend Cooling Fans tachometers * Hotend Cooling Fans tachometers

22
config/examples/AnyCubic/i3/Configuration_adv.h
View file

@ -584,6 +584,9 @@
#define CONTROLLERFAN_SPEED_IDLE 0 // (0-255) Idle speed, used when motors are disabled #define CONTROLLERFAN_SPEED_IDLE 0 // (0-255) Idle speed, used when motors are disabled
#define CONTROLLERFAN_IDLE_TIME 60 // (seconds) Extra time to keep the fan running after disabling motors #define CONTROLLERFAN_IDLE_TIME 60 // (seconds) Extra time to keep the fan running after disabling motors
//#define CONTROLLERFAN_KICKSTART_TIME 100 // (ms)
//#define CONTROLLERFAN_KICKSTART_POWER 180 // 64-255
// Use TEMP_SENSOR_BOARD as a trigger for enabling the controller fan // Use TEMP_SENSOR_BOARD as a trigger for enabling the controller fan
//#define CONTROLLER_FAN_MIN_BOARD_TEMP 40 // (°C) Turn on the fan if the board reaches this temperature //#define CONTROLLER_FAN_MIN_BOARD_TEMP 40 // (°C) Turn on the fan if the board reaches this temperature
@ -602,8 +605,8 @@
* gets it spinning reliably for a short time before setting the requested speed. * gets it spinning reliably for a short time before setting the requested speed.
* (Does not work on Sanguinololu with FAN_SOFT_PWM.) * (Does not work on Sanguinololu with FAN_SOFT_PWM.)
*/ */
//#define FAN_KICKSTART_TIME 100 // (ms) //#define EFAN_KICKSTART_TIME 100 // (ms)
//#define FAN_KICKSTART_POWER 180 // 64-255 //#define EFAN_KICKSTART_POWER 180 // 64-255
// Some coolers may require a non-zero "off" state. // Some coolers may require a non-zero "off" state.
//#define FAN_OFF_PWM 1 //#define FAN_OFF_PWM 1
@ -692,12 +695,15 @@
#define CHAMBER_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1
#define COOLER_AUTO_FAN_PIN -1 #define COOLER_AUTO_FAN_PIN -1
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50
#define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 is full speed
#define CHAMBER_AUTO_FAN_TEMPERATURE 30 //#define EXTRUDER_AUTO_FAN_KICKSTART_TIME 100 // (ms)
#define CHAMBER_AUTO_FAN_SPEED 255 //#define EXTRUDER_AUTO_FAN_KICKSTART_POWER 180 // 64-255
#define COOLER_AUTO_FAN_TEMPERATURE 18
#define COOLER_AUTO_FAN_SPEED 255 #define CHAMBER_AUTO_FAN_TEMPERATURE 28
#define CHAMBER_AUTO_FAN_SPEED 255
#define COOLER_AUTO_FAN_TEMPERATURE 18
#define COOLER_AUTO_FAN_SPEED 255
/** /**
* Hotend Cooling Fans tachometers * Hotend Cooling Fans tachometers

22
config/examples/ArmEd/Configuration_adv.h
View file

@ -589,6 +589,9 @@
#define CONTROLLERFAN_SPEED_IDLE 0 // (0-255) Idle speed, used when motors are disabled #define CONTROLLERFAN_SPEED_IDLE 0 // (0-255) Idle speed, used when motors are disabled
#define CONTROLLERFAN_IDLE_TIME 60 // (seconds) Extra time to keep the fan running after disabling motors #define CONTROLLERFAN_IDLE_TIME 60 // (seconds) Extra time to keep the fan running after disabling motors
//#define CONTROLLERFAN_KICKSTART_TIME 100 // (ms)
//#define CONTROLLERFAN_KICKSTART_POWER 180 // 64-255
// Use TEMP_SENSOR_BOARD as a trigger for enabling the controller fan // Use TEMP_SENSOR_BOARD as a trigger for enabling the controller fan
//#define CONTROLLER_FAN_MIN_BOARD_TEMP 40 // (°C) Turn on the fan if the board reaches this temperature //#define CONTROLLER_FAN_MIN_BOARD_TEMP 40 // (°C) Turn on the fan if the board reaches this temperature
@ -607,8 +610,8 @@
* gets it spinning reliably for a short time before setting the requested speed. * gets it spinning reliably for a short time before setting the requested speed.
* (Does not work on Sanguinololu with FAN_SOFT_PWM.) * (Does not work on Sanguinololu with FAN_SOFT_PWM.)
*/ */
//#define FAN_KICKSTART_TIME 100 // (ms) //#define EFAN_KICKSTART_TIME 100 // (ms)
//#define FAN_KICKSTART_POWER 180 // 64-255 //#define EFAN_KICKSTART_POWER 180 // 64-255
// Some coolers may require a non-zero "off" state. // Some coolers may require a non-zero "off" state.
//#define FAN_OFF_PWM 1 //#define FAN_OFF_PWM 1
@ -697,12 +700,15 @@
#define CHAMBER_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1
#define COOLER_AUTO_FAN_PIN -1 #define COOLER_AUTO_FAN_PIN -1
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50
#define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 is full speed
#define CHAMBER_AUTO_FAN_TEMPERATURE 30 //#define EXTRUDER_AUTO_FAN_KICKSTART_TIME 100 // (ms)
#define CHAMBER_AUTO_FAN_SPEED 255 //#define EXTRUDER_AUTO_FAN_KICKSTART_POWER 180 // 64-255
#define COOLER_AUTO_FAN_TEMPERATURE 18
#define COOLER_AUTO_FAN_SPEED 255 #define CHAMBER_AUTO_FAN_TEMPERATURE 28
#define CHAMBER_AUTO_FAN_SPEED 255
#define COOLER_AUTO_FAN_TEMPERATURE 18
#define COOLER_AUTO_FAN_SPEED 255
/** /**
* Hotend Cooling Fans tachometers * Hotend Cooling Fans tachometers

22
config/examples/Artillery/Genius Pro/Configuration_adv.h
View file

@ -584,6 +584,9 @@
#define CONTROLLERFAN_SPEED_IDLE 0 // (0-255) Idle speed, used when motors are disabled #define CONTROLLERFAN_SPEED_IDLE 0 // (0-255) Idle speed, used when motors are disabled
#define CONTROLLERFAN_IDLE_TIME 60 // (seconds) Extra time to keep the fan running after disabling motors #define CONTROLLERFAN_IDLE_TIME 60 // (seconds) Extra time to keep the fan running after disabling motors
//#define CONTROLLERFAN_KICKSTART_TIME 100 // (ms)
//#define CONTROLLERFAN_KICKSTART_POWER 180 // 64-255
// Use TEMP_SENSOR_BOARD as a trigger for enabling the controller fan // Use TEMP_SENSOR_BOARD as a trigger for enabling the controller fan
//#define CONTROLLER_FAN_MIN_BOARD_TEMP 40 // (°C) Turn on the fan if the board reaches this temperature //#define CONTROLLER_FAN_MIN_BOARD_TEMP 40 // (°C) Turn on the fan if the board reaches this temperature
@ -602,8 +605,8 @@
* gets it spinning reliably for a short time before setting the requested speed. * gets it spinning reliably for a short time before setting the requested speed.
* (Does not work on Sanguinololu with FAN_SOFT_PWM.) * (Does not work on Sanguinololu with FAN_SOFT_PWM.)
*/ */
//#define FAN_KICKSTART_TIME 100 // (ms) //#define EFAN_KICKSTART_TIME 100 // (ms)
//#define FAN_KICKSTART_POWER 180 // 64-255 //#define EFAN_KICKSTART_POWER 180 // 64-255
// Some coolers may require a non-zero "off" state. // Some coolers may require a non-zero "off" state.
//#define FAN_OFF_PWM 1 //#define FAN_OFF_PWM 1
@ -692,12 +695,15 @@
#define CHAMBER_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1
#define COOLER_AUTO_FAN_PIN -1 #define COOLER_AUTO_FAN_PIN -1
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50
#define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 is full speed
#define CHAMBER_AUTO_FAN_TEMPERATURE 30 //#define EXTRUDER_AUTO_FAN_KICKSTART_TIME 100 // (ms)
#define CHAMBER_AUTO_FAN_SPEED 255 //#define EXTRUDER_AUTO_FAN_KICKSTART_POWER 180 // 64-255
#define COOLER_AUTO_FAN_TEMPERATURE 18
#define COOLER_AUTO_FAN_SPEED 255 #define CHAMBER_AUTO_FAN_TEMPERATURE 28
#define CHAMBER_AUTO_FAN_SPEED 255
#define COOLER_AUTO_FAN_TEMPERATURE 18
#define COOLER_AUTO_FAN_SPEED 255
/** /**
* Hotend Cooling Fans tachometers * Hotend Cooling Fans tachometers

22
config/examples/Artillery/Genius/BLTouch/Configuration_adv.h
View file

@ -584,6 +584,9 @@
#define CONTROLLERFAN_SPEED_IDLE 0 // (0-255) Idle speed, used when motors are disabled #define CONTROLLERFAN_SPEED_IDLE 0 // (0-255) Idle speed, used when motors are disabled
#define CONTROLLERFAN_IDLE_TIME 60 // (seconds) Extra time to keep the fan running after disabling motors #define CONTROLLERFAN_IDLE_TIME 60 // (seconds) Extra time to keep the fan running after disabling motors
//#define CONTROLLERFAN_KICKSTART_TIME 100 // (ms)
//#define CONTROLLERFAN_KICKSTART_POWER 180 // 64-255
// Use TEMP_SENSOR_BOARD as a trigger for enabling the controller fan // Use TEMP_SENSOR_BOARD as a trigger for enabling the controller fan
//#define CONTROLLER_FAN_MIN_BOARD_TEMP 40 // (°C) Turn on the fan if the board reaches this temperature //#define CONTROLLER_FAN_MIN_BOARD_TEMP 40 // (°C) Turn on the fan if the board reaches this temperature
@ -602,8 +605,8 @@
* gets it spinning reliably for a short time before setting the requested speed. * gets it spinning reliably for a short time before setting the requested speed.
* (Does not work on Sanguinololu with FAN_SOFT_PWM.) * (Does not work on Sanguinololu with FAN_SOFT_PWM.)
*/ */
//#define FAN_KICKSTART_TIME 100 // (ms) //#define EFAN_KICKSTART_TIME 100 // (ms)
//#define FAN_KICKSTART_POWER 180 // 64-255 //#define EFAN_KICKSTART_POWER 180 // 64-255
// Some coolers may require a non-zero "off" state. // Some coolers may require a non-zero "off" state.
//#define FAN_OFF_PWM 1 //#define FAN_OFF_PWM 1
@ -692,12 +695,15 @@
#define CHAMBER_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1
#define COOLER_AUTO_FAN_PIN -1 #define COOLER_AUTO_FAN_PIN -1
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50
#define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 is full speed
#define CHAMBER_AUTO_FAN_TEMPERATURE 30 //#define EXTRUDER_AUTO_FAN_KICKSTART_TIME 100 // (ms)
#define CHAMBER_AUTO_FAN_SPEED 255 //#define EXTRUDER_AUTO_FAN_KICKSTART_POWER 180 // 64-255
#define COOLER_AUTO_FAN_TEMPERATURE 18
#define COOLER_AUTO_FAN_SPEED 255 #define CHAMBER_AUTO_FAN_TEMPERATURE 28
#define CHAMBER_AUTO_FAN_SPEED 255
#define COOLER_AUTO_FAN_TEMPERATURE 18
#define COOLER_AUTO_FAN_SPEED 255
/** /**
* Hotend Cooling Fans tachometers * Hotend Cooling Fans tachometers

22
config/examples/Artillery/Genius/V1/Configuration_adv.h
View file

@ -584,6 +584,9 @@
#define CONTROLLERFAN_SPEED_IDLE 0 // (0-255) Idle speed, used when motors are disabled #define CONTROLLERFAN_SPEED_IDLE 0 // (0-255) Idle speed, used when motors are disabled
#define CONTROLLERFAN_IDLE_TIME 60 // (seconds) Extra time to keep the fan running after disabling motors #define CONTROLLERFAN_IDLE_TIME 60 // (seconds) Extra time to keep the fan running after disabling motors
//#define CONTROLLERFAN_KICKSTART_TIME 100 // (ms)
//#define CONTROLLERFAN_KICKSTART_POWER 180 // 64-255
// Use TEMP_SENSOR_BOARD as a trigger for enabling the controller fan // Use TEMP_SENSOR_BOARD as a trigger for enabling the controller fan
//#define CONTROLLER_FAN_MIN_BOARD_TEMP 40 // (°C) Turn on the fan if the board reaches this temperature //#define CONTROLLER_FAN_MIN_BOARD_TEMP 40 // (°C) Turn on the fan if the board reaches this temperature
@ -602,8 +605,8 @@
* gets it spinning reliably for a short time before setting the requested speed. * gets it spinning reliably for a short time before setting the requested speed.
* (Does not work on Sanguinololu with FAN_SOFT_PWM.) * (Does not work on Sanguinololu with FAN_SOFT_PWM.)
*/ */
//#define FAN_KICKSTART_TIME 100 // (ms) //#define EFAN_KICKSTART_TIME 100 // (ms)
//#define FAN_KICKSTART_POWER 180 // 64-255 //#define EFAN_KICKSTART_POWER 180 // 64-255
// Some coolers may require a non-zero "off" state. // Some coolers may require a non-zero "off" state.
//#define FAN_OFF_PWM 1 //#define FAN_OFF_PWM 1
@ -692,12 +695,15 @@
#define CHAMBER_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1
#define COOLER_AUTO_FAN_PIN -1 #define COOLER_AUTO_FAN_PIN -1
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50
#define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 is full speed
#define CHAMBER_AUTO_FAN_TEMPERATURE 30 //#define EXTRUDER_AUTO_FAN_KICKSTART_TIME 100 // (ms)
#define CHAMBER_AUTO_FAN_SPEED 255 //#define EXTRUDER_AUTO_FAN_KICKSTART_POWER 180 // 64-255
#define COOLER_AUTO_FAN_TEMPERATURE 18
#define COOLER_AUTO_FAN_SPEED 255 #define CHAMBER_AUTO_FAN_TEMPERATURE 28
#define CHAMBER_AUTO_FAN_SPEED 255
#define COOLER_AUTO_FAN_TEMPERATURE 18
#define COOLER_AUTO_FAN_SPEED 255
/** /**
* Hotend Cooling Fans tachometers * Hotend Cooling Fans tachometers

22
config/examples/Artillery/Hornet/Configuration_adv.h
View file

@ -584,6 +584,9 @@
#define CONTROLLERFAN_SPEED_IDLE 0 // (0-255) Idle speed, used when motors are disabled #define CONTROLLERFAN_SPEED_IDLE 0 // (0-255) Idle speed, used when motors are disabled
#define CONTROLLERFAN_IDLE_TIME 60 // (seconds) Extra time to keep the fan running after disabling motors #define CONTROLLERFAN_IDLE_TIME 60 // (seconds) Extra time to keep the fan running after disabling motors
#define CONTROLLERFAN_KICKSTART_TIME 100 // (ms)
//#define CONTROLLERFAN_KICKSTART_POWER 180 // 64-255
// Use TEMP_SENSOR_BOARD as a trigger for enabling the controller fan // Use TEMP_SENSOR_BOARD as a trigger for enabling the controller fan
//#define CONTROLLER_FAN_MIN_BOARD_TEMP 40 // (°C) Turn on the fan if the board reaches this temperature //#define CONTROLLER_FAN_MIN_BOARD_TEMP 40 // (°C) Turn on the fan if the board reaches this temperature
@ -602,8 +605,8 @@
* gets it spinning reliably for a short time before setting the requested speed. * gets it spinning reliably for a short time before setting the requested speed.
* (Does not work on Sanguinololu with FAN_SOFT_PWM.) * (Does not work on Sanguinololu with FAN_SOFT_PWM.)
*/ */
#define FAN_KICKSTART_TIME 100 // (ms) #define EFAN_KICKSTART_TIME 100 // (ms)
//#define FAN_KICKSTART_POWER 180 // 64-255 //#define EFAN_KICKSTART_POWER 180 // 64-255
// Some coolers may require a non-zero "off" state. // Some coolers may require a non-zero "off" state.
//#define FAN_OFF_PWM 1 //#define FAN_OFF_PWM 1
@ -692,12 +695,15 @@
#define CHAMBER_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1
#define COOLER_AUTO_FAN_PIN -1 #define COOLER_AUTO_FAN_PIN -1
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50
#define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 is full speed
#define CHAMBER_AUTO_FAN_TEMPERATURE 30 //#define EXTRUDER_AUTO_FAN_KICKSTART_TIME 100 // (ms)
#define CHAMBER_AUTO_FAN_SPEED 255 //#define EXTRUDER_AUTO_FAN_KICKSTART_POWER 180 // 64-255
#define COOLER_AUTO_FAN_TEMPERATURE 18
#define COOLER_AUTO_FAN_SPEED 255 #define CHAMBER_AUTO_FAN_TEMPERATURE 28
#define CHAMBER_AUTO_FAN_SPEED 255
#define COOLER_AUTO_FAN_TEMPERATURE 18
#define COOLER_AUTO_FAN_SPEED 255
/** /**
* Hotend Cooling Fans tachometers * Hotend Cooling Fans tachometers

22
config/examples/Artillery/Sidewinder X1/0.9 BMG - E3D V6/Configuration_adv.h
View file

@ -584,6 +584,9 @@
#define CONTROLLERFAN_SPEED_IDLE 0 // (0-255) Idle speed, used when motors are disabled #define CONTROLLERFAN_SPEED_IDLE 0 // (0-255) Idle speed, used when motors are disabled
#define CONTROLLERFAN_IDLE_TIME 60 // (seconds) Extra time to keep the fan running after disabling motors #define CONTROLLERFAN_IDLE_TIME 60 // (seconds) Extra time to keep the fan running after disabling motors
//#define CONTROLLERFAN_KICKSTART_TIME 100 // (ms)
//#define CONTROLLERFAN_KICKSTART_POWER 180 // 64-255
// Use TEMP_SENSOR_BOARD as a trigger for enabling the controller fan // Use TEMP_SENSOR_BOARD as a trigger for enabling the controller fan
//#define CONTROLLER_FAN_MIN_BOARD_TEMP 40 // (°C) Turn on the fan if the board reaches this temperature //#define CONTROLLER_FAN_MIN_BOARD_TEMP 40 // (°C) Turn on the fan if the board reaches this temperature
@ -602,8 +605,8 @@
* gets it spinning reliably for a short time before setting the requested speed. * gets it spinning reliably for a short time before setting the requested speed.
* (Does not work on Sanguinololu with FAN_SOFT_PWM.) * (Does not work on Sanguinololu with FAN_SOFT_PWM.)
*/ */
//#define FAN_KICKSTART_TIME 100 // (ms) //#define EFAN_KICKSTART_TIME 100 // (ms)
//#define FAN_KICKSTART_POWER 180 // 64-255 //#define EFAN_KICKSTART_POWER 180 // 64-255
// Some coolers may require a non-zero "off" state. // Some coolers may require a non-zero "off" state.
//#define FAN_OFF_PWM 1 //#define FAN_OFF_PWM 1
@ -692,12 +695,15 @@
#define CHAMBER_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1
#define COOLER_AUTO_FAN_PIN -1 #define COOLER_AUTO_FAN_PIN -1
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50
#define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 is full speed
#define CHAMBER_AUTO_FAN_TEMPERATURE 30 //#define EXTRUDER_AUTO_FAN_KICKSTART_TIME 100 // (ms)
#define CHAMBER_AUTO_FAN_SPEED 255 //#define EXTRUDER_AUTO_FAN_KICKSTART_POWER 180 // 64-255
#define COOLER_AUTO_FAN_TEMPERATURE 18
#define COOLER_AUTO_FAN_SPEED 255 #define CHAMBER_AUTO_FAN_TEMPERATURE 28
#define CHAMBER_AUTO_FAN_SPEED 255
#define COOLER_AUTO_FAN_TEMPERATURE 18
#define COOLER_AUTO_FAN_SPEED 255
/** /**
* Hotend Cooling Fans tachometers * Hotend Cooling Fans tachometers

22
config/examples/Artillery/Sidewinder X1/V1/Configuration_adv.h
View file

@ -584,6 +584,9 @@
#define CONTROLLERFAN_SPEED_IDLE 0 // (0-255) Idle speed, used when motors are disabled #define CONTROLLERFAN_SPEED_IDLE 0 // (0-255) Idle speed, used when motors are disabled
#define CONTROLLERFAN_IDLE_TIME 60 // (seconds) Extra time to keep the fan running after disabling motors #define CONTROLLERFAN_IDLE_TIME 60 // (seconds) Extra time to keep the fan running after disabling motors
//#define CONTROLLERFAN_KICKSTART_TIME 100 // (ms)
//#define CONTROLLERFAN_KICKSTART_POWER 180 // 64-255
// Use TEMP_SENSOR_BOARD as a trigger for enabling the controller fan // Use TEMP_SENSOR_BOARD as a trigger for enabling the controller fan
//#define CONTROLLER_FAN_MIN_BOARD_TEMP 40 // (°C) Turn on the fan if the board reaches this temperature //#define CONTROLLER_FAN_MIN_BOARD_TEMP 40 // (°C) Turn on the fan if the board reaches this temperature
@ -602,8 +605,8 @@
* gets it spinning reliably for a short time before setting the requested speed. * gets it spinning reliably for a short time before setting the requested speed.
* (Does not work on Sanguinololu with FAN_SOFT_PWM.) * (Does not work on Sanguinololu with FAN_SOFT_PWM.)
*/ */
//#define FAN_KICKSTART_TIME 100 // (ms) //#define EFAN_KICKSTART_TIME 100 // (ms)
//#define FAN_KICKSTART_POWER 180 // 64-255 //#define EFAN_KICKSTART_POWER 180 // 64-255
// Some coolers may require a non-zero "off" state. // Some coolers may require a non-zero "off" state.
//#define FAN_OFF_PWM 1 //#define FAN_OFF_PWM 1
@ -692,12 +695,15 @@
#define CHAMBER_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1
#define COOLER_AUTO_FAN_PIN -1 #define COOLER_AUTO_FAN_PIN -1
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50
#define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 is full speed
#define CHAMBER_AUTO_FAN_TEMPERATURE 30 //#define EXTRUDER_AUTO_FAN_KICKSTART_TIME 100 // (ms)
#define CHAMBER_AUTO_FAN_SPEED 255 //#define EXTRUDER_AUTO_FAN_KICKSTART_POWER 180 // 64-255
#define COOLER_AUTO_FAN_TEMPERATURE 18
#define COOLER_AUTO_FAN_SPEED 255 #define CHAMBER_AUTO_FAN_TEMPERATURE 28
#define CHAMBER_AUTO_FAN_SPEED 255
#define COOLER_AUTO_FAN_TEMPERATURE 18
#define COOLER_AUTO_FAN_SPEED 255
/** /**
* Hotend Cooling Fans tachometers * Hotend Cooling Fans tachometers

22
config/examples/Artillery/Sidewinder X2/Configuration_adv.h
View file

@ -584,6 +584,9 @@
#define CONTROLLERFAN_SPEED_IDLE 0 // (0-255) Idle speed, used when motors are disabled #define CONTROLLERFAN_SPEED_IDLE 0 // (0-255) Idle speed, used when motors are disabled
#define CONTROLLERFAN_IDLE_TIME 60 // (seconds) Extra time to keep the fan running after disabling motors #define CONTROLLERFAN_IDLE_TIME 60 // (seconds) Extra time to keep the fan running after disabling motors
#define CONTROLLERFAN_KICKSTART_TIME 100 // (ms)
//#define CONTROLLERFAN_KICKSTART_POWER 180 // 64-255
// Use TEMP_SENSOR_BOARD as a trigger for enabling the controller fan // Use TEMP_SENSOR_BOARD as a trigger for enabling the controller fan
//#define CONTROLLER_FAN_MIN_BOARD_TEMP 40 // (°C) Turn on the fan if the board reaches this temperature //#define CONTROLLER_FAN_MIN_BOARD_TEMP 40 // (°C) Turn on the fan if the board reaches this temperature
@ -602,8 +605,8 @@
* gets it spinning reliably for a short time before setting the requested speed. * gets it spinning reliably for a short time before setting the requested speed.
* (Does not work on Sanguinololu with FAN_SOFT_PWM.) * (Does not work on Sanguinololu with FAN_SOFT_PWM.)
*/ */
#define FAN_KICKSTART_TIME 100 // (ms) #define EFAN_KICKSTART_TIME 100 // (ms)
//#define FAN_KICKSTART_POWER 180 // 64-255 //#define EFAN_KICKSTART_POWER 180 // 64-255
// Some coolers may require a non-zero "off" state. // Some coolers may require a non-zero "off" state.
//#define FAN_OFF_PWM 1 //#define FAN_OFF_PWM 1
@ -692,12 +695,15 @@
#define CHAMBER_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1
#define COOLER_AUTO_FAN_PIN -1 #define COOLER_AUTO_FAN_PIN -1
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50
#define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 is full speed
#define CHAMBER_AUTO_FAN_TEMPERATURE 30 //#define EXTRUDER_AUTO_FAN_KICKSTART_TIME 100 // (ms)
#define CHAMBER_AUTO_FAN_SPEED 255 //#define EXTRUDER_AUTO_FAN_KICKSTART_POWER 180 // 64-255
#define COOLER_AUTO_FAN_TEMPERATURE 18
#define COOLER_AUTO_FAN_SPEED 255 #define CHAMBER_AUTO_FAN_TEMPERATURE 28
#define CHAMBER_AUTO_FAN_SPEED 255
#define COOLER_AUTO_FAN_TEMPERATURE 18
#define COOLER_AUTO_FAN_SPEED 255
/** /**
* Hotend Cooling Fans tachometers * Hotend Cooling Fans tachometers

22
config/examples/Azteeg/X5GT/Configuration_adv.h
View file

@ -584,6 +584,9 @@
#define CONTROLLERFAN_SPEED_IDLE 0 // (0-255) Idle speed, used when motors are disabled #define CONTROLLERFAN_SPEED_IDLE 0 // (0-255) Idle speed, used when motors are disabled
#define CONTROLLERFAN_IDLE_TIME 60 // (seconds) Extra time to keep the fan running after disabling motors #define CONTROLLERFAN_IDLE_TIME 60 // (seconds) Extra time to keep the fan running after disabling motors
//#define CONTROLLERFAN_KICKSTART_TIME 100 // (ms)
//#define CONTROLLERFAN_KICKSTART_POWER 180 // 64-255
// Use TEMP_SENSOR_BOARD as a trigger for enabling the controller fan // Use TEMP_SENSOR_BOARD as a trigger for enabling the controller fan
//#define CONTROLLER_FAN_MIN_BOARD_TEMP 40 // (°C) Turn on the fan if the board reaches this temperature //#define CONTROLLER_FAN_MIN_BOARD_TEMP 40 // (°C) Turn on the fan if the board reaches this temperature
@ -602,8 +605,8 @@
* gets it spinning reliably for a short time before setting the requested speed. * gets it spinning reliably for a short time before setting the requested speed.
* (Does not work on Sanguinololu with FAN_SOFT_PWM.) * (Does not work on Sanguinololu with FAN_SOFT_PWM.)
*/ */
//#define FAN_KICKSTART_TIME 100 // (ms) //#define EFAN_KICKSTART_TIME 100 // (ms)
//#define FAN_KICKSTART_POWER 180 // 64-255 //#define EFAN_KICKSTART_POWER 180 // 64-255
// Some coolers may require a non-zero "off" state. // Some coolers may require a non-zero "off" state.
//#define FAN_OFF_PWM 1 //#define FAN_OFF_PWM 1
@ -692,12 +695,15 @@
#define CHAMBER_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1
#define COOLER_AUTO_FAN_PIN -1 #define COOLER_AUTO_FAN_PIN -1
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50
#define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 is full speed
#define CHAMBER_AUTO_FAN_TEMPERATURE 30 //#define EXTRUDER_AUTO_FAN_KICKSTART_TIME 100 // (ms)
#define CHAMBER_AUTO_FAN_SPEED 255 //#define EXTRUDER_AUTO_FAN_KICKSTART_POWER 180 // 64-255
#define COOLER_AUTO_FAN_TEMPERATURE 18
#define COOLER_AUTO_FAN_SPEED 255 #define CHAMBER_AUTO_FAN_TEMPERATURE 28
#define CHAMBER_AUTO_FAN_SPEED 255
#define COOLER_AUTO_FAN_TEMPERATURE 18
#define COOLER_AUTO_FAN_SPEED 255
/** /**
* Hotend Cooling Fans tachometers * Hotend Cooling Fans tachometers

22
config/examples/BIBO/TouchX/cyclops/Configuration_adv.h
View file

@ -584,6 +584,9 @@
#define CONTROLLERFAN_SPEED_IDLE 0 // (0-255) Idle speed, used when motors are disabled #define CONTROLLERFAN_SPEED_IDLE 0 // (0-255) Idle speed, used when motors are disabled
#define CONTROLLERFAN_IDLE_TIME 60 // (seconds) Extra time to keep the fan running after disabling motors #define CONTROLLERFAN_IDLE_TIME 60 // (seconds) Extra time to keep the fan running after disabling motors
//#define CONTROLLERFAN_KICKSTART_TIME 100 // (ms)
//#define CONTROLLERFAN_KICKSTART_POWER 180 // 64-255
// Use TEMP_SENSOR_BOARD as a trigger for enabling the controller fan // Use TEMP_SENSOR_BOARD as a trigger for enabling the controller fan
//#define CONTROLLER_FAN_MIN_BOARD_TEMP 40 // (°C) Turn on the fan if the board reaches this temperature //#define CONTROLLER_FAN_MIN_BOARD_TEMP 40 // (°C) Turn on the fan if the board reaches this temperature
@ -602,8 +605,8 @@
* gets it spinning reliably for a short time before setting the requested speed. * gets it spinning reliably for a short time before setting the requested speed.
* (Does not work on Sanguinololu with FAN_SOFT_PWM.) * (Does not work on Sanguinololu with FAN_SOFT_PWM.)
*/ */
//#define FAN_KICKSTART_TIME 100 // (ms) //#define EFAN_KICKSTART_TIME 100 // (ms)
//#define FAN_KICKSTART_POWER 180 // 64-255 //#define EFAN_KICKSTART_POWER 180 // 64-255
// Some coolers may require a non-zero "off" state. // Some coolers may require a non-zero "off" state.
//#define FAN_OFF_PWM 1 //#define FAN_OFF_PWM 1
@ -692,12 +695,15 @@
#define CHAMBER_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1
#define COOLER_AUTO_FAN_PIN -1 #define COOLER_AUTO_FAN_PIN -1
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50
#define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 is full speed
#define CHAMBER_AUTO_FAN_TEMPERATURE 30 //#define EXTRUDER_AUTO_FAN_KICKSTART_TIME 100 // (ms)
#define CHAMBER_AUTO_FAN_SPEED 255 //#define EXTRUDER_AUTO_FAN_KICKSTART_POWER 180 // 64-255
#define COOLER_AUTO_FAN_TEMPERATURE 18
#define COOLER_AUTO_FAN_SPEED 255 #define CHAMBER_AUTO_FAN_TEMPERATURE 28
#define CHAMBER_AUTO_FAN_SPEED 255
#define COOLER_AUTO_FAN_TEMPERATURE 18
#define COOLER_AUTO_FAN_SPEED 255
/** /**
* Hotend Cooling Fans tachometers * Hotend Cooling Fans tachometers

22
config/examples/BIBO/TouchX/default/Configuration_adv.h
View file

@ -584,6 +584,9 @@
#define CONTROLLERFAN_SPEED_IDLE 0 // (0-255) Idle speed, used when motors are disabled #define CONTROLLERFAN_SPEED_IDLE 0 // (0-255) Idle speed, used when motors are disabled
#define CONTROLLERFAN_IDLE_TIME 60 // (seconds) Extra time to keep the fan running after disabling motors #define CONTROLLERFAN_IDLE_TIME 60 // (seconds) Extra time to keep the fan running after disabling motors
//#define CONTROLLERFAN_KICKSTART_TIME 100 // (ms)
//#define CONTROLLERFAN_KICKSTART_POWER 180 // 64-255
// Use TEMP_SENSOR_BOARD as a trigger for enabling the controller fan // Use TEMP_SENSOR_BOARD as a trigger for enabling the controller fan
//#define CONTROLLER_FAN_MIN_BOARD_TEMP 40 // (°C) Turn on the fan if the board reaches this temperature //#define CONTROLLER_FAN_MIN_BOARD_TEMP 40 // (°C) Turn on the fan if the board reaches this temperature
@ -602,8 +605,8 @@
* gets it spinning reliably for a short time before setting the requested speed. * gets it spinning reliably for a short time before setting the requested speed.
* (Does not work on Sanguinololu with FAN_SOFT_PWM.) * (Does not work on Sanguinololu with FAN_SOFT_PWM.)
*/ */
//#define FAN_KICKSTART_TIME 100 // (ms) //#define EFAN_KICKSTART_TIME 100 // (ms)
//#define FAN_KICKSTART_POWER 180 // 64-255 //#define EFAN_KICKSTART_POWER 180 // 64-255
// Some coolers may require a non-zero "off" state. // Some coolers may require a non-zero "off" state.
//#define FAN_OFF_PWM 1 //#define FAN_OFF_PWM 1
@ -692,12 +695,15 @@
#define CHAMBER_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1
#define COOLER_AUTO_FAN_PIN -1 #define COOLER_AUTO_FAN_PIN -1
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50
#define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 is full speed
#define CHAMBER_AUTO_FAN_TEMPERATURE 30 //#define EXTRUDER_AUTO_FAN_KICKSTART_TIME 100 // (ms)
#define CHAMBER_AUTO_FAN_SPEED 255 //#define EXTRUDER_AUTO_FAN_KICKSTART_POWER 180 // 64-255
#define COOLER_AUTO_FAN_TEMPERATURE 18
#define COOLER_AUTO_FAN_SPEED 255 #define CHAMBER_AUTO_FAN_TEMPERATURE 28
#define CHAMBER_AUTO_FAN_SPEED 255
#define COOLER_AUTO_FAN_TEMPERATURE 18
#define COOLER_AUTO_FAN_SPEED 255
/** /**
* Hotend Cooling Fans tachometers * Hotend Cooling Fans tachometers

22
config/examples/BIQU/B1 SE Plus/Configuration_adv.h
View file

@ -584,6 +584,9 @@
#define CONTROLLERFAN_SPEED_IDLE 0 // (0-255) Idle speed, used when motors are disabled #define CONTROLLERFAN_SPEED_IDLE 0 // (0-255) Idle speed, used when motors are disabled
#define CONTROLLERFAN_IDLE_TIME 60 // (seconds) Extra time to keep the fan running after disabling motors #define CONTROLLERFAN_IDLE_TIME 60 // (seconds) Extra time to keep the fan running after disabling motors
//#define CONTROLLERFAN_KICKSTART_TIME 100 // (ms)
//#define CONTROLLERFAN_KICKSTART_POWER 180 // 64-255
// Use TEMP_SENSOR_BOARD as a trigger for enabling the controller fan // Use TEMP_SENSOR_BOARD as a trigger for enabling the controller fan
//#define CONTROLLER_FAN_MIN_BOARD_TEMP 40 // (°C) Turn on the fan if the board reaches this temperature //#define CONTROLLER_FAN_MIN_BOARD_TEMP 40 // (°C) Turn on the fan if the board reaches this temperature
@ -602,8 +605,8 @@
* gets it spinning reliably for a short time before setting the requested speed. * gets it spinning reliably for a short time before setting the requested speed.
* (Does not work on Sanguinololu with FAN_SOFT_PWM.) * (Does not work on Sanguinololu with FAN_SOFT_PWM.)
*/ */
//#define FAN_KICKSTART_TIME 100 // (ms) //#define EFAN_KICKSTART_TIME 100 // (ms)
//#define FAN_KICKSTART_POWER 180 // 64-255 //#define EFAN_KICKSTART_POWER 180 // 64-255
// Some coolers may require a non-zero "off" state. // Some coolers may require a non-zero "off" state.
//#define FAN_OFF_PWM 1 //#define FAN_OFF_PWM 1
@ -692,12 +695,15 @@
#define CHAMBER_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1
#define COOLER_AUTO_FAN_PIN -1 #define COOLER_AUTO_FAN_PIN -1
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50
#define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 is full speed
#define CHAMBER_AUTO_FAN_TEMPERATURE 30 //#define EXTRUDER_AUTO_FAN_KICKSTART_TIME 100 // (ms)
#define CHAMBER_AUTO_FAN_SPEED 255 //#define EXTRUDER_AUTO_FAN_KICKSTART_POWER 180 // 64-255
#define COOLER_AUTO_FAN_TEMPERATURE 18
#define COOLER_AUTO_FAN_SPEED 255 #define CHAMBER_AUTO_FAN_TEMPERATURE 28
#define CHAMBER_AUTO_FAN_SPEED 255
#define COOLER_AUTO_FAN_TEMPERATURE 18
#define COOLER_AUTO_FAN_SPEED 255
/** /**
* Hotend Cooling Fans tachometers * Hotend Cooling Fans tachometers

22
config/examples/BIQU/B1 SE/Configuration_adv.h
View file

@ -584,6 +584,9 @@
#define CONTROLLERFAN_SPEED_IDLE 0 // (0-255) Idle speed, used when motors are disabled #define CONTROLLERFAN_SPEED_IDLE 0 // (0-255) Idle speed, used when motors are disabled
#define CONTROLLERFAN_IDLE_TIME 60 // (seconds) Extra time to keep the fan running after disabling motors #define CONTROLLERFAN_IDLE_TIME 60 // (seconds) Extra time to keep the fan running after disabling motors
//#define CONTROLLERFAN_KICKSTART_TIME 100 // (ms)
//#define CONTROLLERFAN_KICKSTART_POWER 180 // 64-255
// Use TEMP_SENSOR_BOARD as a trigger for enabling the controller fan // Use TEMP_SENSOR_BOARD as a trigger for enabling the controller fan
//#define CONTROLLER_FAN_MIN_BOARD_TEMP 40 // (°C) Turn on the fan if the board reaches this temperature //#define CONTROLLER_FAN_MIN_BOARD_TEMP 40 // (°C) Turn on the fan if the board reaches this temperature
@ -602,8 +605,8 @@
* gets it spinning reliably for a short time before setting the requested speed. * gets it spinning reliably for a short time before setting the requested speed.
* (Does not work on Sanguinololu with FAN_SOFT_PWM.) * (Does not work on Sanguinololu with FAN_SOFT_PWM.)
*/ */
//#define FAN_KICKSTART_TIME 100 // (ms) //#define EFAN_KICKSTART_TIME 100 // (ms)
//#define FAN_KICKSTART_POWER 180 // 64-255 //#define EFAN_KICKSTART_POWER 180 // 64-255
// Some coolers may require a non-zero "off" state. // Some coolers may require a non-zero "off" state.
//#define FAN_OFF_PWM 1 //#define FAN_OFF_PWM 1
@ -692,12 +695,15 @@
#define CHAMBER_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1
#define COOLER_AUTO_FAN_PIN -1 #define COOLER_AUTO_FAN_PIN -1
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50
#define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 is full speed
#define CHAMBER_AUTO_FAN_TEMPERATURE 30 //#define EXTRUDER_AUTO_FAN_KICKSTART_TIME 100 // (ms)
#define CHAMBER_AUTO_FAN_SPEED 255 //#define EXTRUDER_AUTO_FAN_KICKSTART_POWER 180 // 64-255
#define COOLER_AUTO_FAN_TEMPERATURE 18
#define COOLER_AUTO_FAN_SPEED 255 #define CHAMBER_AUTO_FAN_TEMPERATURE 28
#define CHAMBER_AUTO_FAN_SPEED 255
#define COOLER_AUTO_FAN_TEMPERATURE 18
#define COOLER_AUTO_FAN_SPEED 255
/** /**
* Hotend Cooling Fans tachometers * Hotend Cooling Fans tachometers

22
config/examples/BIQU/B1/Configuration_adv.h
View file

@ -584,6 +584,9 @@
#define CONTROLLERFAN_SPEED_IDLE 0 // (0-255) Idle speed, used when motors are disabled #define CONTROLLERFAN_SPEED_IDLE 0 // (0-255) Idle speed, used when motors are disabled
#define CONTROLLERFAN_IDLE_TIME 60 // (seconds) Extra time to keep the fan running after disabling motors #define CONTROLLERFAN_IDLE_TIME 60 // (seconds) Extra time to keep the fan running after disabling motors
//#define CONTROLLERFAN_KICKSTART_TIME 100 // (ms)
//#define CONTROLLERFAN_KICKSTART_POWER 180 // 64-255
// Use TEMP_SENSOR_BOARD as a trigger for enabling the controller fan // Use TEMP_SENSOR_BOARD as a trigger for enabling the controller fan
//#define CONTROLLER_FAN_MIN_BOARD_TEMP 40 // (°C) Turn on the fan if the board reaches this temperature //#define CONTROLLER_FAN_MIN_BOARD_TEMP 40 // (°C) Turn on the fan if the board reaches this temperature
@ -602,8 +605,8 @@
* gets it spinning reliably for a short time before setting the requested speed. * gets it spinning reliably for a short time before setting the requested speed.
* (Does not work on Sanguinololu with FAN_SOFT_PWM.) * (Does not work on Sanguinololu with FAN_SOFT_PWM.)
*/ */
//#define FAN_KICKSTART_TIME 100 // (ms) //#define EFAN_KICKSTART_TIME 100 // (ms)
//#define FAN_KICKSTART_POWER 180 // 64-255 //#define EFAN_KICKSTART_POWER 180 // 64-255
// Some coolers may require a non-zero "off" state. // Some coolers may require a non-zero "off" state.
//#define FAN_OFF_PWM 1 //#define FAN_OFF_PWM 1
@ -692,12 +695,15 @@
#define CHAMBER_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1
#define COOLER_AUTO_FAN_PIN -1 #define COOLER_AUTO_FAN_PIN -1
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50
#define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 is full speed
#define CHAMBER_AUTO_FAN_TEMPERATURE 30 //#define EXTRUDER_AUTO_FAN_KICKSTART_TIME 100 // (ms)
#define CHAMBER_AUTO_FAN_SPEED 255 //#define EXTRUDER_AUTO_FAN_KICKSTART_POWER 180 // 64-255
#define COOLER_AUTO_FAN_TEMPERATURE 18
#define COOLER_AUTO_FAN_SPEED 255 #define CHAMBER_AUTO_FAN_TEMPERATURE 28
#define CHAMBER_AUTO_FAN_SPEED 255
#define COOLER_AUTO_FAN_TEMPERATURE 18
#define COOLER_AUTO_FAN_SPEED 255
/** /**
* Hotend Cooling Fans tachometers * Hotend Cooling Fans tachometers

22
config/examples/BIQU/BX/Configuration_adv.h
View file

@ -584,6 +584,9 @@
#define CONTROLLERFAN_SPEED_IDLE 0 // (0-255) Idle speed, used when motors are disabled #define CONTROLLERFAN_SPEED_IDLE 0 // (0-255) Idle speed, used when motors are disabled
#define CONTROLLERFAN_IDLE_TIME 60 // (seconds) Extra time to keep the fan running after disabling motors #define CONTROLLERFAN_IDLE_TIME 60 // (seconds) Extra time to keep the fan running after disabling motors
//#define CONTROLLERFAN_KICKSTART_TIME 100 // (ms)
//#define CONTROLLERFAN_KICKSTART_POWER 180 // 64-255
// Use TEMP_SENSOR_BOARD as a trigger for enabling the controller fan // Use TEMP_SENSOR_BOARD as a trigger for enabling the controller fan
//#define CONTROLLER_FAN_MIN_BOARD_TEMP 40 // (°C) Turn on the fan if the board reaches this temperature //#define CONTROLLER_FAN_MIN_BOARD_TEMP 40 // (°C) Turn on the fan if the board reaches this temperature
@ -602,8 +605,8 @@
* gets it spinning reliably for a short time before setting the requested speed. * gets it spinning reliably for a short time before setting the requested speed.
* (Does not work on Sanguinololu with FAN_SOFT_PWM.) * (Does not work on Sanguinololu with FAN_SOFT_PWM.)
*/ */
//#define FAN_KICKSTART_TIME 100 // (ms) //#define EFAN_KICKSTART_TIME 100 // (ms)
//#define FAN_KICKSTART_POWER 180 // 64-255 //#define EFAN_KICKSTART_POWER 180 // 64-255
// Some coolers may require a non-zero "off" state. // Some coolers may require a non-zero "off" state.
//#define FAN_OFF_PWM 1 //#define FAN_OFF_PWM 1
@ -692,12 +695,15 @@
#define CHAMBER_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1
#define COOLER_AUTO_FAN_PIN -1 #define COOLER_AUTO_FAN_PIN -1
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50
#define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 is full speed
#define CHAMBER_AUTO_FAN_TEMPERATURE 30 //#define EXTRUDER_AUTO_FAN_KICKSTART_TIME 100 // (ms)
#define CHAMBER_AUTO_FAN_SPEED 255 //#define EXTRUDER_AUTO_FAN_KICKSTART_POWER 180 // 64-255
#define COOLER_AUTO_FAN_TEMPERATURE 18
#define COOLER_AUTO_FAN_SPEED 255 #define CHAMBER_AUTO_FAN_TEMPERATURE 28
#define CHAMBER_AUTO_FAN_SPEED 255
#define COOLER_AUTO_FAN_TEMPERATURE 18
#define COOLER_AUTO_FAN_SPEED 255
/** /**
* Hotend Cooling Fans tachometers * Hotend Cooling Fans tachometers

22
config/examples/BIQU/Hurakan/Configuration_adv.h
View file

@ -584,6 +584,9 @@
#define CONTROLLERFAN_SPEED_IDLE 0 // (0-255) Idle speed, used when motors are disabled #define CONTROLLERFAN_SPEED_IDLE 0 // (0-255) Idle speed, used when motors are disabled
#define CONTROLLERFAN_IDLE_TIME 60 // (seconds) Extra time to keep the fan running after disabling motors #define CONTROLLERFAN_IDLE_TIME 60 // (seconds) Extra time to keep the fan running after disabling motors
//#define CONTROLLERFAN_KICKSTART_TIME 100 // (ms)
//#define CONTROLLERFAN_KICKSTART_POWER 180 // 64-255
// Use TEMP_SENSOR_BOARD as a trigger for enabling the controller fan // Use TEMP_SENSOR_BOARD as a trigger for enabling the controller fan
//#define CONTROLLER_FAN_MIN_BOARD_TEMP 40 // (°C) Turn on the fan if the board reaches this temperature //#define CONTROLLER_FAN_MIN_BOARD_TEMP 40 // (°C) Turn on the fan if the board reaches this temperature
@ -602,8 +605,8 @@
* gets it spinning reliably for a short time before setting the requested speed. * gets it spinning reliably for a short time before setting the requested speed.
* (Does not work on Sanguinololu with FAN_SOFT_PWM.) * (Does not work on Sanguinololu with FAN_SOFT_PWM.)
*/ */
//#define FAN_KICKSTART_TIME 100 // (ms) //#define EFAN_KICKSTART_TIME 100 // (ms)
//#define FAN_KICKSTART_POWER 180 // 64-255 //#define EFAN_KICKSTART_POWER 180 // 64-255
// Some coolers may require a non-zero "off" state. // Some coolers may require a non-zero "off" state.
//#define FAN_OFF_PWM 1 //#define FAN_OFF_PWM 1
@ -692,12 +695,15 @@
#define CHAMBER_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1
#define COOLER_AUTO_FAN_PIN -1 #define COOLER_AUTO_FAN_PIN -1
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50
#define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 is full speed
#define CHAMBER_AUTO_FAN_TEMPERATURE 30 //#define EXTRUDER_AUTO_FAN_KICKSTART_TIME 100 // (ms)
#define CHAMBER_AUTO_FAN_SPEED 255 //#define EXTRUDER_AUTO_FAN_KICKSTART_POWER 180 // 64-255
#define COOLER_AUTO_FAN_TEMPERATURE 18
#define COOLER_AUTO_FAN_SPEED 255 #define CHAMBER_AUTO_FAN_TEMPERATURE 28
#define CHAMBER_AUTO_FAN_SPEED 255
#define COOLER_AUTO_FAN_TEMPERATURE 18
#define COOLER_AUTO_FAN_SPEED 255
/** /**
* Hotend Cooling Fans tachometers * Hotend Cooling Fans tachometers

22
config/examples/BIQU/Thunder Standard/Configuration_adv.h
View file

@ -584,6 +584,9 @@
#define CONTROLLERFAN_SPEED_IDLE 0 // (0-255) Idle speed, used when motors are disabled #define CONTROLLERFAN_SPEED_IDLE 0 // (0-255) Idle speed, used when motors are disabled
#define CONTROLLERFAN_IDLE_TIME 60 // (seconds) Extra time to keep the fan running after disabling motors #define CONTROLLERFAN_IDLE_TIME 60 // (seconds) Extra time to keep the fan running after disabling motors
//#define CONTROLLERFAN_KICKSTART_TIME 100 // (ms)
//#define CONTROLLERFAN_KICKSTART_POWER 180 // 64-255
// Use TEMP_SENSOR_BOARD as a trigger for enabling the controller fan // Use TEMP_SENSOR_BOARD as a trigger for enabling the controller fan
//#define CONTROLLER_FAN_MIN_BOARD_TEMP 40 // (°C) Turn on the fan if the board reaches this temperature //#define CONTROLLER_FAN_MIN_BOARD_TEMP 40 // (°C) Turn on the fan if the board reaches this temperature
@ -602,8 +605,8 @@
* gets it spinning reliably for a short time before setting the requested speed. * gets it spinning reliably for a short time before setting the requested speed.
* (Does not work on Sanguinololu with FAN_SOFT_PWM.) * (Does not work on Sanguinololu with FAN_SOFT_PWM.)
*/ */
//#define FAN_KICKSTART_TIME 100 // (ms) //#define EFAN_KICKSTART_TIME 100 // (ms)
//#define FAN_KICKSTART_POWER 180 // 64-255 //#define EFAN_KICKSTART_POWER 180 // 64-255
// Some coolers may require a non-zero "off" state. // Some coolers may require a non-zero "off" state.
//#define FAN_OFF_PWM 1 //#define FAN_OFF_PWM 1
@ -692,12 +695,15 @@
#define CHAMBER_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1
#define COOLER_AUTO_FAN_PIN -1 #define COOLER_AUTO_FAN_PIN -1
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50
#define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 is full speed
#define CHAMBER_AUTO_FAN_TEMPERATURE 30 //#define EXTRUDER_AUTO_FAN_KICKSTART_TIME 100 // (ms)
#define CHAMBER_AUTO_FAN_SPEED 255 //#define EXTRUDER_AUTO_FAN_KICKSTART_POWER 180 // 64-255
#define COOLER_AUTO_FAN_TEMPERATURE 18
#define COOLER_AUTO_FAN_SPEED 255 #define CHAMBER_AUTO_FAN_TEMPERATURE 28
#define CHAMBER_AUTO_FAN_SPEED 255
#define COOLER_AUTO_FAN_TEMPERATURE 18
#define COOLER_AUTO_FAN_SPEED 255
/** /**
* Hotend Cooling Fans tachometers * Hotend Cooling Fans tachometers

22
config/examples/BQ/Hephestos/Configuration_adv.h
View file

@ -584,6 +584,9 @@
#define CONTROLLERFAN_SPEED_IDLE 0 // (0-255) Idle speed, used when motors are disabled #define CONTROLLERFAN_SPEED_IDLE 0 // (0-255) Idle speed, used when motors are disabled
#define CONTROLLERFAN_IDLE_TIME 60 // (seconds) Extra time to keep the fan running after disabling motors #define CONTROLLERFAN_IDLE_TIME 60 // (seconds) Extra time to keep the fan running after disabling motors
//#define CONTROLLERFAN_KICKSTART_TIME 100 // (ms)
//#define CONTROLLERFAN_KICKSTART_POWER 180 // 64-255
// Use TEMP_SENSOR_BOARD as a trigger for enabling the controller fan // Use TEMP_SENSOR_BOARD as a trigger for enabling the controller fan
//#define CONTROLLER_FAN_MIN_BOARD_TEMP 40 // (°C) Turn on the fan if the board reaches this temperature //#define CONTROLLER_FAN_MIN_BOARD_TEMP 40 // (°C) Turn on the fan if the board reaches this temperature
@ -602,8 +605,8 @@
* gets it spinning reliably for a short time before setting the requested speed. * gets it spinning reliably for a short time before setting the requested speed.
* (Does not work on Sanguinololu with FAN_SOFT_PWM.) * (Does not work on Sanguinololu with FAN_SOFT_PWM.)
*/ */
//#define FAN_KICKSTART_TIME 100 // (ms) //#define EFAN_KICKSTART_TIME 100 // (ms)
//#define FAN_KICKSTART_POWER 180 // 64-255 //#define EFAN_KICKSTART_POWER 180 // 64-255
// Some coolers may require a non-zero "off" state. // Some coolers may require a non-zero "off" state.
//#define FAN_OFF_PWM 1 //#define FAN_OFF_PWM 1
@ -692,12 +695,15 @@
#define CHAMBER_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1
#define COOLER_AUTO_FAN_PIN -1 #define COOLER_AUTO_FAN_PIN -1
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50
#define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 is full speed
#define CHAMBER_AUTO_FAN_TEMPERATURE 30 //#define EXTRUDER_AUTO_FAN_KICKSTART_TIME 100 // (ms)
#define CHAMBER_AUTO_FAN_SPEED 255 //#define EXTRUDER_AUTO_FAN_KICKSTART_POWER 180 // 64-255
#define COOLER_AUTO_FAN_TEMPERATURE 18
#define COOLER_AUTO_FAN_SPEED 255 #define CHAMBER_AUTO_FAN_TEMPERATURE 28
#define CHAMBER_AUTO_FAN_SPEED 255
#define COOLER_AUTO_FAN_TEMPERATURE 18
#define COOLER_AUTO_FAN_SPEED 255
/** /**
* Hotend Cooling Fans tachometers * Hotend Cooling Fans tachometers

22
config/examples/BQ/Hephestos_2/Configuration_adv.h
View file

@ -584,6 +584,9 @@
#define CONTROLLERFAN_SPEED_IDLE 0 // (0-255) Idle speed, used when motors are disabled #define CONTROLLERFAN_SPEED_IDLE 0 // (0-255) Idle speed, used when motors are disabled
#define CONTROLLERFAN_IDLE_TIME 60 // (seconds) Extra time to keep the fan running after disabling motors #define CONTROLLERFAN_IDLE_TIME 60 // (seconds) Extra time to keep the fan running after disabling motors
//#define CONTROLLERFAN_KICKSTART_TIME 100 // (ms)
//#define CONTROLLERFAN_KICKSTART_POWER 180 // 64-255
// Use TEMP_SENSOR_BOARD as a trigger for enabling the controller fan // Use TEMP_SENSOR_BOARD as a trigger for enabling the controller fan
//#define CONTROLLER_FAN_MIN_BOARD_TEMP 40 // (°C) Turn on the fan if the board reaches this temperature //#define CONTROLLER_FAN_MIN_BOARD_TEMP 40 // (°C) Turn on the fan if the board reaches this temperature
@ -602,8 +605,8 @@
* gets it spinning reliably for a short time before setting the requested speed. * gets it spinning reliably for a short time before setting the requested speed.
* (Does not work on Sanguinololu with FAN_SOFT_PWM.) * (Does not work on Sanguinololu with FAN_SOFT_PWM.)
*/ */
#define FAN_KICKSTART_TIME 800 // (ms) #define EFAN_KICKSTART_TIME 800 // (ms)
//#define FAN_KICKSTART_POWER 180 // 64-255 //#define EFAN_KICKSTART_POWER 180 // 64-255
// Some coolers may require a non-zero "off" state. // Some coolers may require a non-zero "off" state.
//#define FAN_OFF_PWM 1 //#define FAN_OFF_PWM 1
@ -692,12 +695,15 @@
#define CHAMBER_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1
#define COOLER_AUTO_FAN_PIN -1 #define COOLER_AUTO_FAN_PIN -1
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50
#define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 is full speed
#define CHAMBER_AUTO_FAN_TEMPERATURE 30 //#define EXTRUDER_AUTO_FAN_KICKSTART_TIME 100 // (ms)
#define CHAMBER_AUTO_FAN_SPEED 255 //#define EXTRUDER_AUTO_FAN_KICKSTART_POWER 180 // 64-255
#define COOLER_AUTO_FAN_TEMPERATURE 18
#define COOLER_AUTO_FAN_SPEED 255 #define CHAMBER_AUTO_FAN_TEMPERATURE 28
#define CHAMBER_AUTO_FAN_SPEED 255
#define COOLER_AUTO_FAN_TEMPERATURE 18
#define COOLER_AUTO_FAN_SPEED 255
/** /**
* Hotend Cooling Fans tachometers * Hotend Cooling Fans tachometers

22
config/examples/BQ/WITBOX/Configuration_adv.h
View file

@ -584,6 +584,9 @@
#define CONTROLLERFAN_SPEED_IDLE 0 // (0-255) Idle speed, used when motors are disabled #define CONTROLLERFAN_SPEED_IDLE 0 // (0-255) Idle speed, used when motors are disabled
#define CONTROLLERFAN_IDLE_TIME 60 // (seconds) Extra time to keep the fan running after disabling motors #define CONTROLLERFAN_IDLE_TIME 60 // (seconds) Extra time to keep the fan running after disabling motors
//#define CONTROLLERFAN_KICKSTART_TIME 100 // (ms)
//#define CONTROLLERFAN_KICKSTART_POWER 180 // 64-255
// Use TEMP_SENSOR_BOARD as a trigger for enabling the controller fan // Use TEMP_SENSOR_BOARD as a trigger for enabling the controller fan
//#define CONTROLLER_FAN_MIN_BOARD_TEMP 40 // (°C) Turn on the fan if the board reaches this temperature //#define CONTROLLER_FAN_MIN_BOARD_TEMP 40 // (°C) Turn on the fan if the board reaches this temperature
@ -602,8 +605,8 @@
* gets it spinning reliably for a short time before setting the requested speed. * gets it spinning reliably for a short time before setting the requested speed.
* (Does not work on Sanguinololu with FAN_SOFT_PWM.) * (Does not work on Sanguinololu with FAN_SOFT_PWM.)
*/ */
//#define FAN_KICKSTART_TIME 100 // (ms) //#define EFAN_KICKSTART_TIME 100 // (ms)
//#define FAN_KICKSTART_POWER 180 // 64-255 //#define EFAN_KICKSTART_POWER 180 // 64-255
// Some coolers may require a non-zero "off" state. // Some coolers may require a non-zero "off" state.
//#define FAN_OFF_PWM 1 //#define FAN_OFF_PWM 1
@ -692,12 +695,15 @@
#define CHAMBER_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1
#define COOLER_AUTO_FAN_PIN -1 #define COOLER_AUTO_FAN_PIN -1
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50
#define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 is full speed
#define CHAMBER_AUTO_FAN_TEMPERATURE 30 //#define EXTRUDER_AUTO_FAN_KICKSTART_TIME 100 // (ms)
#define CHAMBER_AUTO_FAN_SPEED 255 //#define EXTRUDER_AUTO_FAN_KICKSTART_POWER 180 // 64-255
#define COOLER_AUTO_FAN_TEMPERATURE 18
#define COOLER_AUTO_FAN_SPEED 255 #define CHAMBER_AUTO_FAN_TEMPERATURE 28
#define CHAMBER_AUTO_FAN_SPEED 255
#define COOLER_AUTO_FAN_TEMPERATURE 18
#define COOLER_AUTO_FAN_SPEED 255
/** /**
* Hotend Cooling Fans tachometers * Hotend Cooling Fans tachometers

22
config/examples/CTC/A13/Configuration_adv.h
View file

@ -584,6 +584,9 @@
#define CONTROLLERFAN_SPEED_IDLE 0 // (0-255) Idle speed, used when motors are disabled #define CONTROLLERFAN_SPEED_IDLE 0 // (0-255) Idle speed, used when motors are disabled
#define CONTROLLERFAN_IDLE_TIME 60 // (seconds) Extra time to keep the fan running after disabling motors #define CONTROLLERFAN_IDLE_TIME 60 // (seconds) Extra time to keep the fan running after disabling motors
//#define CONTROLLERFAN_KICKSTART_TIME 100 // (ms)
//#define CONTROLLERFAN_KICKSTART_POWER 180 // 64-255
// Use TEMP_SENSOR_BOARD as a trigger for enabling the controller fan // Use TEMP_SENSOR_BOARD as a trigger for enabling the controller fan
//#define CONTROLLER_FAN_MIN_BOARD_TEMP 40 // (°C) Turn on the fan if the board reaches this temperature //#define CONTROLLER_FAN_MIN_BOARD_TEMP 40 // (°C) Turn on the fan if the board reaches this temperature
@ -602,8 +605,8 @@
* gets it spinning reliably for a short time before setting the requested speed. * gets it spinning reliably for a short time before setting the requested speed.
* (Does not work on Sanguinololu with FAN_SOFT_PWM.) * (Does not work on Sanguinololu with FAN_SOFT_PWM.)
*/ */
//#define FAN_KICKSTART_TIME 100 // (ms) //#define EFAN_KICKSTART_TIME 100 // (ms)
//#define FAN_KICKSTART_POWER 180 // 64-255 //#define EFAN_KICKSTART_POWER 180 // 64-255
// Some coolers may require a non-zero "off" state. // Some coolers may require a non-zero "off" state.
//#define FAN_OFF_PWM 1 //#define FAN_OFF_PWM 1
@ -692,12 +695,15 @@
#define CHAMBER_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1
#define COOLER_AUTO_FAN_PIN -1 #define COOLER_AUTO_FAN_PIN -1
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50
#define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 is full speed
#define CHAMBER_AUTO_FAN_TEMPERATURE 30 //#define EXTRUDER_AUTO_FAN_KICKSTART_TIME 100 // (ms)
#define CHAMBER_AUTO_FAN_SPEED 255 //#define EXTRUDER_AUTO_FAN_KICKSTART_POWER 180 // 64-255
#define COOLER_AUTO_FAN_TEMPERATURE 18
#define COOLER_AUTO_FAN_SPEED 255 #define CHAMBER_AUTO_FAN_TEMPERATURE 28
#define CHAMBER_AUTO_FAN_SPEED 255
#define COOLER_AUTO_FAN_TEMPERATURE 18
#define COOLER_AUTO_FAN_SPEED 255
/** /**
* Hotend Cooling Fans tachometers * Hotend Cooling Fans tachometers

22
config/examples/CTC/Bizer/Configuration_adv.h
View file

@ -584,6 +584,9 @@
#define CONTROLLERFAN_SPEED_IDLE 0 // (0-255) Idle speed, used when motors are disabled #define CONTROLLERFAN_SPEED_IDLE 0 // (0-255) Idle speed, used when motors are disabled
#define CONTROLLERFAN_IDLE_TIME 60 // (seconds) Extra time to keep the fan running after disabling motors #define CONTROLLERFAN_IDLE_TIME 60 // (seconds) Extra time to keep the fan running after disabling motors
//#define CONTROLLERFAN_KICKSTART_TIME 100 // (ms)
//#define CONTROLLERFAN_KICKSTART_POWER 180 // 64-255
// Use TEMP_SENSOR_BOARD as a trigger for enabling the controller fan // Use TEMP_SENSOR_BOARD as a trigger for enabling the controller fan
//#define CONTROLLER_FAN_MIN_BOARD_TEMP 40 // (°C) Turn on the fan if the board reaches this temperature //#define CONTROLLER_FAN_MIN_BOARD_TEMP 40 // (°C) Turn on the fan if the board reaches this temperature
@ -602,8 +605,8 @@
* gets it spinning reliably for a short time before setting the requested speed. * gets it spinning reliably for a short time before setting the requested speed.
* (Does not work on Sanguinololu with FAN_SOFT_PWM.) * (Does not work on Sanguinololu with FAN_SOFT_PWM.)
*/ */
//#define FAN_KICKSTART_TIME 100 // (ms) //#define EFAN_KICKSTART_TIME 100 // (ms)
//#define FAN_KICKSTART_POWER 180 // 64-255 //#define EFAN_KICKSTART_POWER 180 // 64-255
// Some coolers may require a non-zero "off" state. // Some coolers may require a non-zero "off" state.
//#define FAN_OFF_PWM 1 //#define FAN_OFF_PWM 1
@ -692,12 +695,15 @@
#define CHAMBER_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1
#define COOLER_AUTO_FAN_PIN -1 #define COOLER_AUTO_FAN_PIN -1
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50
#define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 is full speed
#define CHAMBER_AUTO_FAN_TEMPERATURE 30 //#define EXTRUDER_AUTO_FAN_KICKSTART_TIME 100 // (ms)
#define CHAMBER_AUTO_FAN_SPEED 255 //#define EXTRUDER_AUTO_FAN_KICKSTART_POWER 180 // 64-255
#define COOLER_AUTO_FAN_TEMPERATURE 18
#define COOLER_AUTO_FAN_SPEED 255 #define CHAMBER_AUTO_FAN_TEMPERATURE 28
#define CHAMBER_AUTO_FAN_SPEED 255
#define COOLER_AUTO_FAN_TEMPERATURE 18
#define COOLER_AUTO_FAN_SPEED 255
/** /**
* Hotend Cooling Fans tachometers * Hotend Cooling Fans tachometers

22
config/examples/CTC/i3 2560 Rev A/no probe/Configuration_adv.h
View file

@ -584,6 +584,9 @@
#define CONTROLLERFAN_SPEED_IDLE 0 // (0-255) Idle speed, used when motors are disabled #define CONTROLLERFAN_SPEED_IDLE 0 // (0-255) Idle speed, used when motors are disabled
#define CONTROLLERFAN_IDLE_TIME 60 // (seconds) Extra time to keep the fan running after disabling motors #define CONTROLLERFAN_IDLE_TIME 60 // (seconds) Extra time to keep the fan running after disabling motors
//#define CONTROLLERFAN_KICKSTART_TIME 100 // (ms)
//#define CONTROLLERFAN_KICKSTART_POWER 180 // 64-255
// Use TEMP_SENSOR_BOARD as a trigger for enabling the controller fan // Use TEMP_SENSOR_BOARD as a trigger for enabling the controller fan
//#define CONTROLLER_FAN_MIN_BOARD_TEMP 40 // (°C) Turn on the fan if the board reaches this temperature //#define CONTROLLER_FAN_MIN_BOARD_TEMP 40 // (°C) Turn on the fan if the board reaches this temperature
@ -602,8 +605,8 @@
* gets it spinning reliably for a short time before setting the requested speed. * gets it spinning reliably for a short time before setting the requested speed.
* (Does not work on Sanguinololu with FAN_SOFT_PWM.) * (Does not work on Sanguinololu with FAN_SOFT_PWM.)
*/ */
//#define FAN_KICKSTART_TIME 100 // (ms) //#define EFAN_KICKSTART_TIME 100 // (ms)
//#define FAN_KICKSTART_POWER 180 // 64-255 //#define EFAN_KICKSTART_POWER 180 // 64-255
// Some coolers may require a non-zero "off" state. // Some coolers may require a non-zero "off" state.
//#define FAN_OFF_PWM 1 //#define FAN_OFF_PWM 1
@ -692,12 +695,15 @@
#define CHAMBER_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1
#define COOLER_AUTO_FAN_PIN -1 #define COOLER_AUTO_FAN_PIN -1
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50
#define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 is full speed
#define CHAMBER_AUTO_FAN_TEMPERATURE 30 //#define EXTRUDER_AUTO_FAN_KICKSTART_TIME 100 // (ms)
#define CHAMBER_AUTO_FAN_SPEED 255 //#define EXTRUDER_AUTO_FAN_KICKSTART_POWER 180 // 64-255
#define COOLER_AUTO_FAN_TEMPERATURE 18
#define COOLER_AUTO_FAN_SPEED 255 #define CHAMBER_AUTO_FAN_TEMPERATURE 28
#define CHAMBER_AUTO_FAN_SPEED 255
#define COOLER_AUTO_FAN_TEMPERATURE 18
#define COOLER_AUTO_FAN_SPEED 255
/** /**
* Hotend Cooling Fans tachometers * Hotend Cooling Fans tachometers

22
config/examples/Cartesio/Configuration_adv.h
View file

@ -584,6 +584,9 @@
#define CONTROLLERFAN_SPEED_IDLE 0 // (0-255) Idle speed, used when motors are disabled #define CONTROLLERFAN_SPEED_IDLE 0 // (0-255) Idle speed, used when motors are disabled
#define CONTROLLERFAN_IDLE_TIME 60 // (seconds) Extra time to keep the fan running after disabling motors #define CONTROLLERFAN_IDLE_TIME 60 // (seconds) Extra time to keep the fan running after disabling motors
//#define CONTROLLERFAN_KICKSTART_TIME 100 // (ms)
//#define CONTROLLERFAN_KICKSTART_POWER 180 // 64-255
// Use TEMP_SENSOR_BOARD as a trigger for enabling the controller fan // Use TEMP_SENSOR_BOARD as a trigger for enabling the controller fan
//#define CONTROLLER_FAN_MIN_BOARD_TEMP 40 // (°C) Turn on the fan if the board reaches this temperature //#define CONTROLLER_FAN_MIN_BOARD_TEMP 40 // (°C) Turn on the fan if the board reaches this temperature
@ -602,8 +605,8 @@
* gets it spinning reliably for a short time before setting the requested speed. * gets it spinning reliably for a short time before setting the requested speed.
* (Does not work on Sanguinololu with FAN_SOFT_PWM.) * (Does not work on Sanguinololu with FAN_SOFT_PWM.)
*/ */
//#define FAN_KICKSTART_TIME 100 // (ms) //#define EFAN_KICKSTART_TIME 100 // (ms)
//#define FAN_KICKSTART_POWER 180 // 64-255 //#define EFAN_KICKSTART_POWER 180 // 64-255
// Some coolers may require a non-zero "off" state. // Some coolers may require a non-zero "off" state.
//#define FAN_OFF_PWM 1 //#define FAN_OFF_PWM 1
@ -692,12 +695,15 @@
#define CHAMBER_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1
#define COOLER_AUTO_FAN_PIN -1 #define COOLER_AUTO_FAN_PIN -1
#define EXTRUDER_AUTO_FAN_TEMPERATURE 35 #define EXTRUDER_AUTO_FAN_TEMPERATURE 35
#define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 is full speed
#define CHAMBER_AUTO_FAN_TEMPERATURE 30 //#define EXTRUDER_AUTO_FAN_KICKSTART_TIME 100 // (ms)
#define CHAMBER_AUTO_FAN_SPEED 255 //#define EXTRUDER_AUTO_FAN_KICKSTART_POWER 180 // 64-255
#define COOLER_AUTO_FAN_TEMPERATURE 18
#define COOLER_AUTO_FAN_SPEED 255 #define CHAMBER_AUTO_FAN_TEMPERATURE 28
#define CHAMBER_AUTO_FAN_SPEED 255
#define COOLER_AUTO_FAN_TEMPERATURE 18
#define COOLER_AUTO_FAN_SPEED 255
/** /**
* Hotend Cooling Fans tachometers * Hotend Cooling Fans tachometers

22
config/examples/Copymaster3D/300/Configuration_adv.h
View file

@ -584,6 +584,9 @@
#define CONTROLLERFAN_SPEED_IDLE 0 // (0-255) Idle speed, used when motors are disabled #define CONTROLLERFAN_SPEED_IDLE 0 // (0-255) Idle speed, used when motors are disabled
#define CONTROLLERFAN_IDLE_TIME 60 // (seconds) Extra time to keep the fan running after disabling motors #define CONTROLLERFAN_IDLE_TIME 60 // (seconds) Extra time to keep the fan running after disabling motors
//#define CONTROLLERFAN_KICKSTART_TIME 100 // (ms)
//#define CONTROLLERFAN_KICKSTART_POWER 180 // 64-255
// Use TEMP_SENSOR_BOARD as a trigger for enabling the controller fan // Use TEMP_SENSOR_BOARD as a trigger for enabling the controller fan
//#define CONTROLLER_FAN_MIN_BOARD_TEMP 40 // (°C) Turn on the fan if the board reaches this temperature //#define CONTROLLER_FAN_MIN_BOARD_TEMP 40 // (°C) Turn on the fan if the board reaches this temperature
@ -602,8 +605,8 @@
* gets it spinning reliably for a short time before setting the requested speed. * gets it spinning reliably for a short time before setting the requested speed.
* (Does not work on Sanguinololu with FAN_SOFT_PWM.) * (Does not work on Sanguinololu with FAN_SOFT_PWM.)
*/ */
//#define FAN_KICKSTART_TIME 100 // (ms) //#define EFAN_KICKSTART_TIME 100 // (ms)
//#define FAN_KICKSTART_POWER 180 // 64-255 //#define EFAN_KICKSTART_POWER 180 // 64-255
// Some coolers may require a non-zero "off" state. // Some coolers may require a non-zero "off" state.
//#define FAN_OFF_PWM 1 //#define FAN_OFF_PWM 1
@ -692,12 +695,15 @@
#define CHAMBER_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1
#define COOLER_AUTO_FAN_PIN -1 #define COOLER_AUTO_FAN_PIN -1
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50
#define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 is full speed
#define CHAMBER_AUTO_FAN_TEMPERATURE 30 //#define EXTRUDER_AUTO_FAN_KICKSTART_TIME 100 // (ms)
#define CHAMBER_AUTO_FAN_SPEED 255 //#define EXTRUDER_AUTO_FAN_KICKSTART_POWER 180 // 64-255
#define COOLER_AUTO_FAN_TEMPERATURE 18
#define COOLER_AUTO_FAN_SPEED 255 #define CHAMBER_AUTO_FAN_TEMPERATURE 28
#define CHAMBER_AUTO_FAN_SPEED 255
#define COOLER_AUTO_FAN_TEMPERATURE 18
#define COOLER_AUTO_FAN_SPEED 255
/** /**
* Hotend Cooling Fans tachometers * Hotend Cooling Fans tachometers

22
config/examples/Copymaster3D/400/Configuration_adv.h
View file

@ -584,6 +584,9 @@
#define CONTROLLERFAN_SPEED_IDLE 0 // (0-255) Idle speed, used when motors are disabled #define CONTROLLERFAN_SPEED_IDLE 0 // (0-255) Idle speed, used when motors are disabled
#define CONTROLLERFAN_IDLE_TIME 60 // (seconds) Extra time to keep the fan running after disabling motors #define CONTROLLERFAN_IDLE_TIME 60 // (seconds) Extra time to keep the fan running after disabling motors
//#define CONTROLLERFAN_KICKSTART_TIME 100 // (ms)
//#define CONTROLLERFAN_KICKSTART_POWER 180 // 64-255
// Use TEMP_SENSOR_BOARD as a trigger for enabling the controller fan // Use TEMP_SENSOR_BOARD as a trigger for enabling the controller fan
//#define CONTROLLER_FAN_MIN_BOARD_TEMP 40 // (°C) Turn on the fan if the board reaches this temperature //#define CONTROLLER_FAN_MIN_BOARD_TEMP 40 // (°C) Turn on the fan if the board reaches this temperature
@ -602,8 +605,8 @@
* gets it spinning reliably for a short time before setting the requested speed. * gets it spinning reliably for a short time before setting the requested speed.
* (Does not work on Sanguinololu with FAN_SOFT_PWM.) * (Does not work on Sanguinololu with FAN_SOFT_PWM.)
*/ */
//#define FAN_KICKSTART_TIME 100 // (ms) //#define EFAN_KICKSTART_TIME 100 // (ms)
//#define FAN_KICKSTART_POWER 180 // 64-255 //#define EFAN_KICKSTART_POWER 180 // 64-255
// Some coolers may require a non-zero "off" state. // Some coolers may require a non-zero "off" state.
//#define FAN_OFF_PWM 1 //#define FAN_OFF_PWM 1
@ -692,12 +695,15 @@
#define CHAMBER_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1
#define COOLER_AUTO_FAN_PIN -1 #define COOLER_AUTO_FAN_PIN -1
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50
#define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 is full speed
#define CHAMBER_AUTO_FAN_TEMPERATURE 30 //#define EXTRUDER_AUTO_FAN_KICKSTART_TIME 100 // (ms)
#define CHAMBER_AUTO_FAN_SPEED 255 //#define EXTRUDER_AUTO_FAN_KICKSTART_POWER 180 // 64-255
#define COOLER_AUTO_FAN_TEMPERATURE 18
#define COOLER_AUTO_FAN_SPEED 255 #define CHAMBER_AUTO_FAN_TEMPERATURE 28
#define CHAMBER_AUTO_FAN_SPEED 255
#define COOLER_AUTO_FAN_TEMPERATURE 18
#define COOLER_AUTO_FAN_SPEED 255
/** /**
* Hotend Cooling Fans tachometers * Hotend Cooling Fans tachometers

22
config/examples/Copymaster3D/500/Configuration_adv.h
View file

@ -584,6 +584,9 @@
#define CONTROLLERFAN_SPEED_IDLE 0 // (0-255) Idle speed, used when motors are disabled #define CONTROLLERFAN_SPEED_IDLE 0 // (0-255) Idle speed, used when motors are disabled
#define CONTROLLERFAN_IDLE_TIME 60 // (seconds) Extra time to keep the fan running after disabling motors #define CONTROLLERFAN_IDLE_TIME 60 // (seconds) Extra time to keep the fan running after disabling motors
//#define CONTROLLERFAN_KICKSTART_TIME 100 // (ms)
//#define CONTROLLERFAN_KICKSTART_POWER 180 // 64-255
// Use TEMP_SENSOR_BOARD as a trigger for enabling the controller fan // Use TEMP_SENSOR_BOARD as a trigger for enabling the controller fan
//#define CONTROLLER_FAN_MIN_BOARD_TEMP 40 // (°C) Turn on the fan if the board reaches this temperature //#define CONTROLLER_FAN_MIN_BOARD_TEMP 40 // (°C) Turn on the fan if the board reaches this temperature
@ -602,8 +605,8 @@
* gets it spinning reliably for a short time before setting the requested speed. * gets it spinning reliably for a short time before setting the requested speed.
* (Does not work on Sanguinololu with FAN_SOFT_PWM.) * (Does not work on Sanguinololu with FAN_SOFT_PWM.)
*/ */
//#define FAN_KICKSTART_TIME 100 // (ms) //#define EFAN_KICKSTART_TIME 100 // (ms)
//#define FAN_KICKSTART_POWER 180 // 64-255 //#define EFAN_KICKSTART_POWER 180 // 64-255
// Some coolers may require a non-zero "off" state. // Some coolers may require a non-zero "off" state.
//#define FAN_OFF_PWM 1 //#define FAN_OFF_PWM 1
@ -692,12 +695,15 @@
#define CHAMBER_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1
#define COOLER_AUTO_FAN_PIN -1 #define COOLER_AUTO_FAN_PIN -1
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50
#define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 is full speed
#define CHAMBER_AUTO_FAN_TEMPERATURE 30 //#define EXTRUDER_AUTO_FAN_KICKSTART_TIME 100 // (ms)
#define CHAMBER_AUTO_FAN_SPEED 255 //#define EXTRUDER_AUTO_FAN_KICKSTART_POWER 180 // 64-255
#define COOLER_AUTO_FAN_TEMPERATURE 18
#define COOLER_AUTO_FAN_SPEED 255 #define CHAMBER_AUTO_FAN_TEMPERATURE 28
#define CHAMBER_AUTO_FAN_SPEED 255
#define COOLER_AUTO_FAN_TEMPERATURE 18
#define COOLER_AUTO_FAN_SPEED 255
/** /**
* Hotend Cooling Fans tachometers * Hotend Cooling Fans tachometers

22
config/examples/Creality/CR-10 Max/Configuration_adv.h
View file

@ -584,6 +584,9 @@
#define CONTROLLERFAN_SPEED_IDLE 0 // (0-255) Idle speed, used when motors are disabled #define CONTROLLERFAN_SPEED_IDLE 0 // (0-255) Idle speed, used when motors are disabled
#define CONTROLLERFAN_IDLE_TIME 60 // (seconds) Extra time to keep the fan running after disabling motors #define CONTROLLERFAN_IDLE_TIME 60 // (seconds) Extra time to keep the fan running after disabling motors
//#define CONTROLLERFAN_KICKSTART_TIME 100 // (ms)
//#define CONTROLLERFAN_KICKSTART_POWER 180 // 64-255
// Use TEMP_SENSOR_BOARD as a trigger for enabling the controller fan // Use TEMP_SENSOR_BOARD as a trigger for enabling the controller fan
//#define CONTROLLER_FAN_MIN_BOARD_TEMP 40 // (°C) Turn on the fan if the board reaches this temperature //#define CONTROLLER_FAN_MIN_BOARD_TEMP 40 // (°C) Turn on the fan if the board reaches this temperature
@ -602,8 +605,8 @@
* gets it spinning reliably for a short time before setting the requested speed. * gets it spinning reliably for a short time before setting the requested speed.
* (Does not work on Sanguinololu with FAN_SOFT_PWM.) * (Does not work on Sanguinololu with FAN_SOFT_PWM.)
*/ */
//#define FAN_KICKSTART_TIME 100 // (ms) //#define EFAN_KICKSTART_TIME 100 // (ms)
//#define FAN_KICKSTART_POWER 180 // 64-255 //#define EFAN_KICKSTART_POWER 180 // 64-255
// Some coolers may require a non-zero "off" state. // Some coolers may require a non-zero "off" state.
//#define FAN_OFF_PWM 1 //#define FAN_OFF_PWM 1
@ -692,12 +695,15 @@
#define CHAMBER_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1
#define COOLER_AUTO_FAN_PIN -1 #define COOLER_AUTO_FAN_PIN -1
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50
#define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 is full speed
#define CHAMBER_AUTO_FAN_TEMPERATURE 30 //#define EXTRUDER_AUTO_FAN_KICKSTART_TIME 100 // (ms)
#define CHAMBER_AUTO_FAN_SPEED 255 //#define EXTRUDER_AUTO_FAN_KICKSTART_POWER 180 // 64-255
#define COOLER_AUTO_FAN_TEMPERATURE 18
#define COOLER_AUTO_FAN_SPEED 255 #define CHAMBER_AUTO_FAN_TEMPERATURE 28
#define CHAMBER_AUTO_FAN_SPEED 255
#define COOLER_AUTO_FAN_TEMPERATURE 18
#define COOLER_AUTO_FAN_SPEED 255
/** /**
* Hotend Cooling Fans tachometers * Hotend Cooling Fans tachometers

22
config/examples/Creality/CR-10 Mini/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h
View file

@ -584,6 +584,9 @@
#define CONTROLLERFAN_SPEED_IDLE 0 // (0-255) Idle speed, used when motors are disabled #define CONTROLLERFAN_SPEED_IDLE 0 // (0-255) Idle speed, used when motors are disabled
#define CONTROLLERFAN_IDLE_TIME 60 // (seconds) Extra time to keep the fan running after disabling motors #define CONTROLLERFAN_IDLE_TIME 60 // (seconds) Extra time to keep the fan running after disabling motors
//#define CONTROLLERFAN_KICKSTART_TIME 100 // (ms)
//#define CONTROLLERFAN_KICKSTART_POWER 180 // 64-255
// Use TEMP_SENSOR_BOARD as a trigger for enabling the controller fan // Use TEMP_SENSOR_BOARD as a trigger for enabling the controller fan
//#define CONTROLLER_FAN_MIN_BOARD_TEMP 40 // (°C) Turn on the fan if the board reaches this temperature //#define CONTROLLER_FAN_MIN_BOARD_TEMP 40 // (°C) Turn on the fan if the board reaches this temperature
@ -602,8 +605,8 @@
* gets it spinning reliably for a short time before setting the requested speed. * gets it spinning reliably for a short time before setting the requested speed.
* (Does not work on Sanguinololu with FAN_SOFT_PWM.) * (Does not work on Sanguinololu with FAN_SOFT_PWM.)
*/ */
//#define FAN_KICKSTART_TIME 100 // (ms) //#define EFAN_KICKSTART_TIME 100 // (ms)
//#define FAN_KICKSTART_POWER 180 // 64-255 //#define EFAN_KICKSTART_POWER 180 // 64-255
// Some coolers may require a non-zero "off" state. // Some coolers may require a non-zero "off" state.
//#define FAN_OFF_PWM 1 //#define FAN_OFF_PWM 1
@ -692,12 +695,15 @@
#define CHAMBER_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1
#define COOLER_AUTO_FAN_PIN -1 #define COOLER_AUTO_FAN_PIN -1
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50
#define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 is full speed
#define CHAMBER_AUTO_FAN_TEMPERATURE 30 //#define EXTRUDER_AUTO_FAN_KICKSTART_TIME 100 // (ms)
#define CHAMBER_AUTO_FAN_SPEED 255 //#define EXTRUDER_AUTO_FAN_KICKSTART_POWER 180 // 64-255
#define COOLER_AUTO_FAN_TEMPERATURE 18
#define COOLER_AUTO_FAN_SPEED 255 #define CHAMBER_AUTO_FAN_TEMPERATURE 28
#define CHAMBER_AUTO_FAN_SPEED 255
#define COOLER_AUTO_FAN_TEMPERATURE 18
#define COOLER_AUTO_FAN_SPEED 255
/** /**
* Hotend Cooling Fans tachometers * Hotend Cooling Fans tachometers

22
config/examples/Creality/CR-10 Mini/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h
View file

@ -584,6 +584,9 @@
#define CONTROLLERFAN_SPEED_IDLE 0 // (0-255) Idle speed, used when motors are disabled #define CONTROLLERFAN_SPEED_IDLE 0 // (0-255) Idle speed, used when motors are disabled
#define CONTROLLERFAN_IDLE_TIME 60 // (seconds) Extra time to keep the fan running after disabling motors #define CONTROLLERFAN_IDLE_TIME 60 // (seconds) Extra time to keep the fan running after disabling motors
//#define CONTROLLERFAN_KICKSTART_TIME 100 // (ms)
//#define CONTROLLERFAN_KICKSTART_POWER 180 // 64-255
// Use TEMP_SENSOR_BOARD as a trigger for enabling the controller fan // Use TEMP_SENSOR_BOARD as a trigger for enabling the controller fan
//#define CONTROLLER_FAN_MIN_BOARD_TEMP 40 // (°C) Turn on the fan if the board reaches this temperature //#define CONTROLLER_FAN_MIN_BOARD_TEMP 40 // (°C) Turn on the fan if the board reaches this temperature
@ -602,8 +605,8 @@
* gets it spinning reliably for a short time before setting the requested speed. * gets it spinning reliably for a short time before setting the requested speed.
* (Does not work on Sanguinololu with FAN_SOFT_PWM.) * (Does not work on Sanguinololu with FAN_SOFT_PWM.)
*/ */
//#define FAN_KICKSTART_TIME 100 // (ms) //#define EFAN_KICKSTART_TIME 100 // (ms)
//#define FAN_KICKSTART_POWER 180 // 64-255 //#define EFAN_KICKSTART_POWER 180 // 64-255
// Some coolers may require a non-zero "off" state. // Some coolers may require a non-zero "off" state.
//#define FAN_OFF_PWM 1 //#define FAN_OFF_PWM 1
@ -692,12 +695,15 @@
#define CHAMBER_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1
#define COOLER_AUTO_FAN_PIN -1 #define COOLER_AUTO_FAN_PIN -1
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50
#define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 is full speed
#define CHAMBER_AUTO_FAN_TEMPERATURE 30 //#define EXTRUDER_AUTO_FAN_KICKSTART_TIME 100 // (ms)
#define CHAMBER_AUTO_FAN_SPEED 255 //#define EXTRUDER_AUTO_FAN_KICKSTART_POWER 180 // 64-255
#define COOLER_AUTO_FAN_TEMPERATURE 18
#define COOLER_AUTO_FAN_SPEED 255 #define CHAMBER_AUTO_FAN_TEMPERATURE 28
#define CHAMBER_AUTO_FAN_SPEED 255
#define COOLER_AUTO_FAN_TEMPERATURE 18
#define COOLER_AUTO_FAN_SPEED 255
/** /**
* Hotend Cooling Fans tachometers * Hotend Cooling Fans tachometers

22
config/examples/Creality/CR-10 Mini/CrealityV1/Configuration_adv.h
View file

@ -584,6 +584,9 @@
#define CONTROLLERFAN_SPEED_IDLE 0 // (0-255) Idle speed, used when motors are disabled #define CONTROLLERFAN_SPEED_IDLE 0 // (0-255) Idle speed, used when motors are disabled
#define CONTROLLERFAN_IDLE_TIME 60 // (seconds) Extra time to keep the fan running after disabling motors #define CONTROLLERFAN_IDLE_TIME 60 // (seconds) Extra time to keep the fan running after disabling motors
//#define CONTROLLERFAN_KICKSTART_TIME 100 // (ms)
//#define CONTROLLERFAN_KICKSTART_POWER 180 // 64-255
// Use TEMP_SENSOR_BOARD as a trigger for enabling the controller fan // Use TEMP_SENSOR_BOARD as a trigger for enabling the controller fan
//#define CONTROLLER_FAN_MIN_BOARD_TEMP 40 // (°C) Turn on the fan if the board reaches this temperature //#define CONTROLLER_FAN_MIN_BOARD_TEMP 40 // (°C) Turn on the fan if the board reaches this temperature
@ -602,8 +605,8 @@
* gets it spinning reliably for a short time before setting the requested speed. * gets it spinning reliably for a short time before setting the requested speed.
* (Does not work on Sanguinololu with FAN_SOFT_PWM.) * (Does not work on Sanguinololu with FAN_SOFT_PWM.)
*/ */
//#define FAN_KICKSTART_TIME 100 // (ms) //#define EFAN_KICKSTART_TIME 100 // (ms)
//#define FAN_KICKSTART_POWER 180 // 64-255 //#define EFAN_KICKSTART_POWER 180 // 64-255
// Some coolers may require a non-zero "off" state. // Some coolers may require a non-zero "off" state.
//#define FAN_OFF_PWM 1 //#define FAN_OFF_PWM 1
@ -692,12 +695,15 @@
#define CHAMBER_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1
#define COOLER_AUTO_FAN_PIN -1 #define COOLER_AUTO_FAN_PIN -1
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50
#define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 is full speed
#define CHAMBER_AUTO_FAN_TEMPERATURE 30 //#define EXTRUDER_AUTO_FAN_KICKSTART_TIME 100 // (ms)
#define CHAMBER_AUTO_FAN_SPEED 255 //#define EXTRUDER_AUTO_FAN_KICKSTART_POWER 180 // 64-255
#define COOLER_AUTO_FAN_TEMPERATURE 18
#define COOLER_AUTO_FAN_SPEED 255 #define CHAMBER_AUTO_FAN_TEMPERATURE 28
#define CHAMBER_AUTO_FAN_SPEED 255
#define COOLER_AUTO_FAN_TEMPERATURE 18
#define COOLER_AUTO_FAN_SPEED 255
/** /**
* Hotend Cooling Fans tachometers * Hotend Cooling Fans tachometers

22
config/examples/Creality/CR-10 Mini/MEEB-3DP/Configuration_adv.h
View file

@ -583,6 +583,9 @@
#define CONTROLLERFAN_SPEED_IDLE 127 // (0-255) Idle speed, used when motors are disabled #define CONTROLLERFAN_SPEED_IDLE 127 // (0-255) Idle speed, used when motors are disabled
#define CONTROLLERFAN_IDLE_TIME 60 // (seconds) Extra time to keep the fan running after disabling motors #define CONTROLLERFAN_IDLE_TIME 60 // (seconds) Extra time to keep the fan running after disabling motors
//#define CONTROLLERFAN_KICKSTART_TIME 100 // (ms)
//#define CONTROLLERFAN_KICKSTART_POWER 180 // 64-255
// Use TEMP_SENSOR_BOARD as a trigger for enabling the controller fan // Use TEMP_SENSOR_BOARD as a trigger for enabling the controller fan
//#define CONTROLLER_FAN_MIN_BOARD_TEMP 40 // (°C) Turn on the fan if the board reaches this temperature //#define CONTROLLER_FAN_MIN_BOARD_TEMP 40 // (°C) Turn on the fan if the board reaches this temperature
@ -601,8 +604,8 @@
* gets it spinning reliably for a short time before setting the requested speed. * gets it spinning reliably for a short time before setting the requested speed.
* (Does not work on Sanguinololu with FAN_SOFT_PWM.) * (Does not work on Sanguinololu with FAN_SOFT_PWM.)
*/ */
#define FAN_KICKSTART_TIME 200 // (ms) #define EFAN_KICKSTART_TIME 200 // (ms)
//#define FAN_KICKSTART_POWER 180 // 64-255 //#define EFAN_KICKSTART_POWER 180 // 64-255
// Some coolers may require a non-zero "off" state. // Some coolers may require a non-zero "off" state.
//#define FAN_OFF_PWM 1 //#define FAN_OFF_PWM 1
@ -691,12 +694,15 @@
#define CHAMBER_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1
#define COOLER_AUTO_FAN_PIN -1 #define COOLER_AUTO_FAN_PIN -1
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50
#define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 is full speed
#define CHAMBER_AUTO_FAN_TEMPERATURE 30 //#define EXTRUDER_AUTO_FAN_KICKSTART_TIME 100 // (ms)
#define CHAMBER_AUTO_FAN_SPEED 255 //#define EXTRUDER_AUTO_FAN_KICKSTART_POWER 180 // 64-255
#define COOLER_AUTO_FAN_TEMPERATURE 18
#define COOLER_AUTO_FAN_SPEED 255 #define CHAMBER_AUTO_FAN_TEMPERATURE 28
#define CHAMBER_AUTO_FAN_SPEED 255
#define COOLER_AUTO_FAN_TEMPERATURE 18
#define COOLER_AUTO_FAN_SPEED 255
/** /**
* Hotend Cooling Fans tachometers * Hotend Cooling Fans tachometers

22
config/examples/Creality/CR-10 S4/CrealityV1/Configuration_adv.h
View file

@ -584,6 +584,9 @@
#define CONTROLLERFAN_SPEED_IDLE 0 // (0-255) Idle speed, used when motors are disabled #define CONTROLLERFAN_SPEED_IDLE 0 // (0-255) Idle speed, used when motors are disabled
#define CONTROLLERFAN_IDLE_TIME 60 // (seconds) Extra time to keep the fan running after disabling motors #define CONTROLLERFAN_IDLE_TIME 60 // (seconds) Extra time to keep the fan running after disabling motors
//#define CONTROLLERFAN_KICKSTART_TIME 100 // (ms)
//#define CONTROLLERFAN_KICKSTART_POWER 180 // 64-255
// Use TEMP_SENSOR_BOARD as a trigger for enabling the controller fan // Use TEMP_SENSOR_BOARD as a trigger for enabling the controller fan
//#define CONTROLLER_FAN_MIN_BOARD_TEMP 40 // (°C) Turn on the fan if the board reaches this temperature //#define CONTROLLER_FAN_MIN_BOARD_TEMP 40 // (°C) Turn on the fan if the board reaches this temperature
@ -602,8 +605,8 @@
* gets it spinning reliably for a short time before setting the requested speed. * gets it spinning reliably for a short time before setting the requested speed.
* (Does not work on Sanguinololu with FAN_SOFT_PWM.) * (Does not work on Sanguinololu with FAN_SOFT_PWM.)
*/ */
//#define FAN_KICKSTART_TIME 100 // (ms) //#define EFAN_KICKSTART_TIME 100 // (ms)
//#define FAN_KICKSTART_POWER 180 // 64-255 //#define EFAN_KICKSTART_POWER 180 // 64-255
// Some coolers may require a non-zero "off" state. // Some coolers may require a non-zero "off" state.
//#define FAN_OFF_PWM 1 //#define FAN_OFF_PWM 1
@ -692,12 +695,15 @@
#define CHAMBER_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1
#define COOLER_AUTO_FAN_PIN -1 #define COOLER_AUTO_FAN_PIN -1
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50
#define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 is full speed
#define CHAMBER_AUTO_FAN_TEMPERATURE 30 //#define EXTRUDER_AUTO_FAN_KICKSTART_TIME 100 // (ms)
#define CHAMBER_AUTO_FAN_SPEED 255 //#define EXTRUDER_AUTO_FAN_KICKSTART_POWER 180 // 64-255
#define COOLER_AUTO_FAN_TEMPERATURE 18
#define COOLER_AUTO_FAN_SPEED 255 #define CHAMBER_AUTO_FAN_TEMPERATURE 28
#define CHAMBER_AUTO_FAN_SPEED 255
#define COOLER_AUTO_FAN_TEMPERATURE 18
#define COOLER_AUTO_FAN_SPEED 255
/** /**
* Hotend Cooling Fans tachometers * Hotend Cooling Fans tachometers

22
config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 1.2 with TFT35 E3 V3.0/Configuration_adv.h
View file

@ -584,6 +584,9 @@
#define CONTROLLERFAN_SPEED_IDLE 0 // (0-255) Idle speed, used when motors are disabled #define CONTROLLERFAN_SPEED_IDLE 0 // (0-255) Idle speed, used when motors are disabled
#define CONTROLLERFAN_IDLE_TIME 60 // (seconds) Extra time to keep the fan running after disabling motors #define CONTROLLERFAN_IDLE_TIME 60 // (seconds) Extra time to keep the fan running after disabling motors
//#define CONTROLLERFAN_KICKSTART_TIME 100 // (ms)
//#define CONTROLLERFAN_KICKSTART_POWER 180 // 64-255
// Use TEMP_SENSOR_BOARD as a trigger for enabling the controller fan // Use TEMP_SENSOR_BOARD as a trigger for enabling the controller fan
//#define CONTROLLER_FAN_MIN_BOARD_TEMP 40 // (°C) Turn on the fan if the board reaches this temperature //#define CONTROLLER_FAN_MIN_BOARD_TEMP 40 // (°C) Turn on the fan if the board reaches this temperature
@ -602,8 +605,8 @@
* gets it spinning reliably for a short time before setting the requested speed. * gets it spinning reliably for a short time before setting the requested speed.
* (Does not work on Sanguinololu with FAN_SOFT_PWM.) * (Does not work on Sanguinololu with FAN_SOFT_PWM.)
*/ */
//#define FAN_KICKSTART_TIME 100 // (ms) //#define EFAN_KICKSTART_TIME 100 // (ms)
//#define FAN_KICKSTART_POWER 180 // 64-255 //#define EFAN_KICKSTART_POWER 180 // 64-255
// Some coolers may require a non-zero "off" state. // Some coolers may require a non-zero "off" state.
//#define FAN_OFF_PWM 1 //#define FAN_OFF_PWM 1
@ -692,12 +695,15 @@
#define CHAMBER_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1
#define COOLER_AUTO_FAN_PIN -1 #define COOLER_AUTO_FAN_PIN -1
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50
#define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 is full speed
#define CHAMBER_AUTO_FAN_TEMPERATURE 30 //#define EXTRUDER_AUTO_FAN_KICKSTART_TIME 100 // (ms)
#define CHAMBER_AUTO_FAN_SPEED 255 //#define EXTRUDER_AUTO_FAN_KICKSTART_POWER 180 // 64-255
#define COOLER_AUTO_FAN_TEMPERATURE 18
#define COOLER_AUTO_FAN_SPEED 255 #define CHAMBER_AUTO_FAN_TEMPERATURE 28
#define CHAMBER_AUTO_FAN_SPEED 255
#define COOLER_AUTO_FAN_TEMPERATURE 18
#define COOLER_AUTO_FAN_SPEED 255
/** /**
* Hotend Cooling Fans tachometers * Hotend Cooling Fans tachometers

22
config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 v3/Configuration_adv.h
View file

@ -584,6 +584,9 @@
#define CONTROLLERFAN_SPEED_IDLE 0 // (0-255) Idle speed, used when motors are disabled #define CONTROLLERFAN_SPEED_IDLE 0 // (0-255) Idle speed, used when motors are disabled
#define CONTROLLERFAN_IDLE_TIME 60 // (seconds) Extra time to keep the fan running after disabling motors #define CONTROLLERFAN_IDLE_TIME 60 // (seconds) Extra time to keep the fan running after disabling motors
//#define CONTROLLERFAN_KICKSTART_TIME 100 // (ms)
//#define CONTROLLERFAN_KICKSTART_POWER 180 // 64-255
// Use TEMP_SENSOR_BOARD as a trigger for enabling the controller fan // Use TEMP_SENSOR_BOARD as a trigger for enabling the controller fan
//#define CONTROLLER_FAN_MIN_BOARD_TEMP 40 // (°C) Turn on the fan if the board reaches this temperature //#define CONTROLLER_FAN_MIN_BOARD_TEMP 40 // (°C) Turn on the fan if the board reaches this temperature
@ -602,8 +605,8 @@
* gets it spinning reliably for a short time before setting the requested speed. * gets it spinning reliably for a short time before setting the requested speed.
* (Does not work on Sanguinololu with FAN_SOFT_PWM.) * (Does not work on Sanguinololu with FAN_SOFT_PWM.)
*/ */
//#define FAN_KICKSTART_TIME 100 // (ms) //#define EFAN_KICKSTART_TIME 100 // (ms)
//#define FAN_KICKSTART_POWER 180 // 64-255 //#define EFAN_KICKSTART_POWER 180 // 64-255
// Some coolers may require a non-zero "off" state. // Some coolers may require a non-zero "off" state.
//#define FAN_OFF_PWM 1 //#define FAN_OFF_PWM 1
@ -692,12 +695,15 @@
#define CHAMBER_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1
#define COOLER_AUTO_FAN_PIN -1 #define COOLER_AUTO_FAN_PIN -1
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50
#define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 is full speed
#define CHAMBER_AUTO_FAN_TEMPERATURE 30 //#define EXTRUDER_AUTO_FAN_KICKSTART_TIME 100 // (ms)
#define CHAMBER_AUTO_FAN_SPEED 255 //#define EXTRUDER_AUTO_FAN_KICKSTART_POWER 180 // 64-255
#define COOLER_AUTO_FAN_TEMPERATURE 18
#define COOLER_AUTO_FAN_SPEED 255 #define CHAMBER_AUTO_FAN_TEMPERATURE 28
#define CHAMBER_AUTO_FAN_SPEED 255
#define COOLER_AUTO_FAN_TEMPERATURE 18
#define COOLER_AUTO_FAN_SPEED 255
/** /**
* Hotend Cooling Fans tachometers * Hotend Cooling Fans tachometers

22
config/examples/Creality/CR-10 S5/CrealityV1/Configuration_adv.h
View file

@ -584,6 +584,9 @@
#define CONTROLLERFAN_SPEED_IDLE 0 // (0-255) Idle speed, used when motors are disabled #define CONTROLLERFAN_SPEED_IDLE 0 // (0-255) Idle speed, used when motors are disabled
#define CONTROLLERFAN_IDLE_TIME 60 // (seconds) Extra time to keep the fan running after disabling motors #define CONTROLLERFAN_IDLE_TIME 60 // (seconds) Extra time to keep the fan running after disabling motors
//#define CONTROLLERFAN_KICKSTART_TIME 100 // (ms)
//#define CONTROLLERFAN_KICKSTART_POWER 180 // 64-255
// Use TEMP_SENSOR_BOARD as a trigger for enabling the controller fan // Use TEMP_SENSOR_BOARD as a trigger for enabling the controller fan
//#define CONTROLLER_FAN_MIN_BOARD_TEMP 40 // (°C) Turn on the fan if the board reaches this temperature //#define CONTROLLER_FAN_MIN_BOARD_TEMP 40 // (°C) Turn on the fan if the board reaches this temperature
@ -602,8 +605,8 @@
* gets it spinning reliably for a short time before setting the requested speed. * gets it spinning reliably for a short time before setting the requested speed.
* (Does not work on Sanguinololu with FAN_SOFT_PWM.) * (Does not work on Sanguinololu with FAN_SOFT_PWM.)
*/ */
//#define FAN_KICKSTART_TIME 100 // (ms) //#define EFAN_KICKSTART_TIME 100 // (ms)
//#define FAN_KICKSTART_POWER 180 // 64-255 //#define EFAN_KICKSTART_POWER 180 // 64-255
// Some coolers may require a non-zero "off" state. // Some coolers may require a non-zero "off" state.
//#define FAN_OFF_PWM 1 //#define FAN_OFF_PWM 1
@ -692,12 +695,15 @@
#define CHAMBER_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1
#define COOLER_AUTO_FAN_PIN -1 #define COOLER_AUTO_FAN_PIN -1
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50
#define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 is full speed
#define CHAMBER_AUTO_FAN_TEMPERATURE 30 //#define EXTRUDER_AUTO_FAN_KICKSTART_TIME 100 // (ms)
#define CHAMBER_AUTO_FAN_SPEED 255 //#define EXTRUDER_AUTO_FAN_KICKSTART_POWER 180 // 64-255
#define COOLER_AUTO_FAN_TEMPERATURE 18
#define COOLER_AUTO_FAN_SPEED 255 #define CHAMBER_AUTO_FAN_TEMPERATURE 28
#define CHAMBER_AUTO_FAN_SPEED 255
#define COOLER_AUTO_FAN_TEMPERATURE 18
#define COOLER_AUTO_FAN_SPEED 255
/** /**
* Hotend Cooling Fans tachometers * Hotend Cooling Fans tachometers

22
config/examples/Creality/CR-10 S5/CrealityV2.2-BLTouch/Configuration_adv.h
View file

@ -584,6 +584,9 @@
#define CONTROLLERFAN_SPEED_IDLE 0 // (0-255) Idle speed, used when motors are disabled #define CONTROLLERFAN_SPEED_IDLE 0 // (0-255) Idle speed, used when motors are disabled
#define CONTROLLERFAN_IDLE_TIME 60 // (seconds) Extra time to keep the fan running after disabling motors #define CONTROLLERFAN_IDLE_TIME 60 // (seconds) Extra time to keep the fan running after disabling motors
//#define CONTROLLERFAN_KICKSTART_TIME 100 // (ms)
//#define CONTROLLERFAN_KICKSTART_POWER 180 // 64-255
// Use TEMP_SENSOR_BOARD as a trigger for enabling the controller fan // Use TEMP_SENSOR_BOARD as a trigger for enabling the controller fan
//#define CONTROLLER_FAN_MIN_BOARD_TEMP 40 // (°C) Turn on the fan if the board reaches this temperature //#define CONTROLLER_FAN_MIN_BOARD_TEMP 40 // (°C) Turn on the fan if the board reaches this temperature
@ -602,8 +605,8 @@
* gets it spinning reliably for a short time before setting the requested speed. * gets it spinning reliably for a short time before setting the requested speed.
* (Does not work on Sanguinololu with FAN_SOFT_PWM.) * (Does not work on Sanguinololu with FAN_SOFT_PWM.)
*/ */
//#define FAN_KICKSTART_TIME 100 // (ms) //#define EFAN_KICKSTART_TIME 100 // (ms)
//#define FAN_KICKSTART_POWER 180 // 64-255 //#define EFAN_KICKSTART_POWER 180 // 64-255
// Some coolers may require a non-zero "off" state. // Some coolers may require a non-zero "off" state.
//#define FAN_OFF_PWM 1 //#define FAN_OFF_PWM 1
@ -692,12 +695,15 @@
#define CHAMBER_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1
#define COOLER_AUTO_FAN_PIN -1 #define COOLER_AUTO_FAN_PIN -1
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50
#define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 is full speed
#define CHAMBER_AUTO_FAN_TEMPERATURE 30 //#define EXTRUDER_AUTO_FAN_KICKSTART_TIME 100 // (ms)
#define CHAMBER_AUTO_FAN_SPEED 255 //#define EXTRUDER_AUTO_FAN_KICKSTART_POWER 180 // 64-255
#define COOLER_AUTO_FAN_TEMPERATURE 18
#define COOLER_AUTO_FAN_SPEED 255 #define CHAMBER_AUTO_FAN_TEMPERATURE 28
#define CHAMBER_AUTO_FAN_SPEED 255
#define COOLER_AUTO_FAN_TEMPERATURE 18
#define COOLER_AUTO_FAN_SPEED 255
/** /**
* Hotend Cooling Fans tachometers * Hotend Cooling Fans tachometers

22
config/examples/Creality/CR-10 V2/Configuration_adv.h
View file

@ -584,6 +584,9 @@
#define CONTROLLERFAN_SPEED_IDLE 0 // (0-255) Idle speed, used when motors are disabled #define CONTROLLERFAN_SPEED_IDLE 0 // (0-255) Idle speed, used when motors are disabled
#define CONTROLLERFAN_IDLE_TIME 60 // (seconds) Extra time to keep the fan running after disabling motors #define CONTROLLERFAN_IDLE_TIME 60 // (seconds) Extra time to keep the fan running after disabling motors
//#define CONTROLLERFAN_KICKSTART_TIME 100 // (ms)
//#define CONTROLLERFAN_KICKSTART_POWER 180 // 64-255
// Use TEMP_SENSOR_BOARD as a trigger for enabling the controller fan // Use TEMP_SENSOR_BOARD as a trigger for enabling the controller fan
//#define CONTROLLER_FAN_MIN_BOARD_TEMP 40 // (°C) Turn on the fan if the board reaches this temperature //#define CONTROLLER_FAN_MIN_BOARD_TEMP 40 // (°C) Turn on the fan if the board reaches this temperature
@ -602,8 +605,8 @@
* gets it spinning reliably for a short time before setting the requested speed. * gets it spinning reliably for a short time before setting the requested speed.
* (Does not work on Sanguinololu with FAN_SOFT_PWM.) * (Does not work on Sanguinololu with FAN_SOFT_PWM.)
*/ */
#define FAN_KICKSTART_TIME 100 // (ms) #define EFAN_KICKSTART_TIME 100 // (ms)
//#define FAN_KICKSTART_POWER 180 // 64-255 //#define EFAN_KICKSTART_POWER 180 // 64-255
// Some coolers may require a non-zero "off" state. // Some coolers may require a non-zero "off" state.
//#define FAN_OFF_PWM 1 //#define FAN_OFF_PWM 1
@ -692,12 +695,15 @@
#define CHAMBER_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1
#define COOLER_AUTO_FAN_PIN -1 #define COOLER_AUTO_FAN_PIN -1
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50
#define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 is full speed
#define CHAMBER_AUTO_FAN_TEMPERATURE 30 //#define EXTRUDER_AUTO_FAN_KICKSTART_TIME 100 // (ms)
#define CHAMBER_AUTO_FAN_SPEED 255 //#define EXTRUDER_AUTO_FAN_KICKSTART_POWER 180 // 64-255
#define COOLER_AUTO_FAN_TEMPERATURE 18
#define COOLER_AUTO_FAN_SPEED 255 #define CHAMBER_AUTO_FAN_TEMPERATURE 28
#define CHAMBER_AUTO_FAN_SPEED 255
#define COOLER_AUTO_FAN_TEMPERATURE 18
#define COOLER_AUTO_FAN_SPEED 255
/** /**
* Hotend Cooling Fans tachometers * Hotend Cooling Fans tachometers

22
config/examples/Creality/CR-10 V3/Configuration_adv.h
View file

@ -584,6 +584,9 @@
#define CONTROLLERFAN_SPEED_IDLE 0 // (0-255) Idle speed, used when motors are disabled #define CONTROLLERFAN_SPEED_IDLE 0 // (0-255) Idle speed, used when motors are disabled
#define CONTROLLERFAN_IDLE_TIME 60 // (seconds) Extra time to keep the fan running after disabling motors #define CONTROLLERFAN_IDLE_TIME 60 // (seconds) Extra time to keep the fan running after disabling motors
//#define CONTROLLERFAN_KICKSTART_TIME 100 // (ms)
//#define CONTROLLERFAN_KICKSTART_POWER 180 // 64-255
// Use TEMP_SENSOR_BOARD as a trigger for enabling the controller fan // Use TEMP_SENSOR_BOARD as a trigger for enabling the controller fan
//#define CONTROLLER_FAN_MIN_BOARD_TEMP 40 // (°C) Turn on the fan if the board reaches this temperature //#define CONTROLLER_FAN_MIN_BOARD_TEMP 40 // (°C) Turn on the fan if the board reaches this temperature
@ -602,8 +605,8 @@
* gets it spinning reliably for a short time before setting the requested speed. * gets it spinning reliably for a short time before setting the requested speed.
* (Does not work on Sanguinololu with FAN_SOFT_PWM.) * (Does not work on Sanguinololu with FAN_SOFT_PWM.)
*/ */
#define FAN_KICKSTART_TIME 100 // (ms) #define EFAN_KICKSTART_TIME 100 // (ms)
//#define FAN_KICKSTART_POWER 180 // 64-255 //#define EFAN_KICKSTART_POWER 180 // 64-255
// Some coolers may require a non-zero "off" state. // Some coolers may require a non-zero "off" state.
//#define FAN_OFF_PWM 1 //#define FAN_OFF_PWM 1
@ -692,12 +695,15 @@
#define CHAMBER_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1
#define COOLER_AUTO_FAN_PIN -1 #define COOLER_AUTO_FAN_PIN -1
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50
#define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 is full speed
#define CHAMBER_AUTO_FAN_TEMPERATURE 30 //#define EXTRUDER_AUTO_FAN_KICKSTART_TIME 100 // (ms)
#define CHAMBER_AUTO_FAN_SPEED 255 //#define EXTRUDER_AUTO_FAN_KICKSTART_POWER 180 // 64-255
#define COOLER_AUTO_FAN_TEMPERATURE 18
#define COOLER_AUTO_FAN_SPEED 255 #define CHAMBER_AUTO_FAN_TEMPERATURE 28
#define CHAMBER_AUTO_FAN_SPEED 255
#define COOLER_AUTO_FAN_TEMPERATURE 18
#define COOLER_AUTO_FAN_SPEED 255
/** /**
* Hotend Cooling Fans tachometers * Hotend Cooling Fans tachometers

22
config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h
View file

@ -584,6 +584,9 @@
#define CONTROLLERFAN_SPEED_IDLE 0 // (0-255) Idle speed, used when motors are disabled #define CONTROLLERFAN_SPEED_IDLE 0 // (0-255) Idle speed, used when motors are disabled
#define CONTROLLERFAN_IDLE_TIME 60 // (seconds) Extra time to keep the fan running after disabling motors #define CONTROLLERFAN_IDLE_TIME 60 // (seconds) Extra time to keep the fan running after disabling motors
//#define CONTROLLERFAN_KICKSTART_TIME 100 // (ms)
//#define CONTROLLERFAN_KICKSTART_POWER 180 // 64-255
// Use TEMP_SENSOR_BOARD as a trigger for enabling the controller fan // Use TEMP_SENSOR_BOARD as a trigger for enabling the controller fan
//#define CONTROLLER_FAN_MIN_BOARD_TEMP 40 // (°C) Turn on the fan if the board reaches this temperature //#define CONTROLLER_FAN_MIN_BOARD_TEMP 40 // (°C) Turn on the fan if the board reaches this temperature
@ -602,8 +605,8 @@
* gets it spinning reliably for a short time before setting the requested speed. * gets it spinning reliably for a short time before setting the requested speed.
* (Does not work on Sanguinololu with FAN_SOFT_PWM.) * (Does not work on Sanguinololu with FAN_SOFT_PWM.)
*/ */
//#define FAN_KICKSTART_TIME 100 // (ms) //#define EFAN_KICKSTART_TIME 100 // (ms)
//#define FAN_KICKSTART_POWER 180 // 64-255 //#define EFAN_KICKSTART_POWER 180 // 64-255
// Some coolers may require a non-zero "off" state. // Some coolers may require a non-zero "off" state.
//#define FAN_OFF_PWM 1 //#define FAN_OFF_PWM 1
@ -692,12 +695,15 @@
#define CHAMBER_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1
#define COOLER_AUTO_FAN_PIN -1 #define COOLER_AUTO_FAN_PIN -1
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50
#define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 is full speed
#define CHAMBER_AUTO_FAN_TEMPERATURE 30 //#define EXTRUDER_AUTO_FAN_KICKSTART_TIME 100 // (ms)
#define CHAMBER_AUTO_FAN_SPEED 255 //#define EXTRUDER_AUTO_FAN_KICKSTART_POWER 180 // 64-255
#define COOLER_AUTO_FAN_TEMPERATURE 18
#define COOLER_AUTO_FAN_SPEED 255 #define CHAMBER_AUTO_FAN_TEMPERATURE 28
#define CHAMBER_AUTO_FAN_SPEED 255
#define COOLER_AUTO_FAN_TEMPERATURE 18
#define COOLER_AUTO_FAN_SPEED 255
/** /**
* Hotend Cooling Fans tachometers * Hotend Cooling Fans tachometers

22
config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h
View file

@ -584,6 +584,9 @@
#define CONTROLLERFAN_SPEED_IDLE 0 // (0-255) Idle speed, used when motors are disabled #define CONTROLLERFAN_SPEED_IDLE 0 // (0-255) Idle speed, used when motors are disabled
#define CONTROLLERFAN_IDLE_TIME 60 // (seconds) Extra time to keep the fan running after disabling motors #define CONTROLLERFAN_IDLE_TIME 60 // (seconds) Extra time to keep the fan running after disabling motors
//#define CONTROLLERFAN_KICKSTART_TIME 100 // (ms)
//#define CONTROLLERFAN_KICKSTART_POWER 180 // 64-255
// Use TEMP_SENSOR_BOARD as a trigger for enabling the controller fan // Use TEMP_SENSOR_BOARD as a trigger for enabling the controller fan
//#define CONTROLLER_FAN_MIN_BOARD_TEMP 40 // (°C) Turn on the fan if the board reaches this temperature //#define CONTROLLER_FAN_MIN_BOARD_TEMP 40 // (°C) Turn on the fan if the board reaches this temperature
@ -602,8 +605,8 @@
* gets it spinning reliably for a short time before setting the requested speed. * gets it spinning reliably for a short time before setting the requested speed.
* (Does not work on Sanguinololu with FAN_SOFT_PWM.) * (Does not work on Sanguinololu with FAN_SOFT_PWM.)
*/ */
//#define FAN_KICKSTART_TIME 100 // (ms) //#define EFAN_KICKSTART_TIME 100 // (ms)
//#define FAN_KICKSTART_POWER 180 // 64-255 //#define EFAN_KICKSTART_POWER 180 // 64-255
// Some coolers may require a non-zero "off" state. // Some coolers may require a non-zero "off" state.
//#define FAN_OFF_PWM 1 //#define FAN_OFF_PWM 1
@ -692,12 +695,15 @@
#define CHAMBER_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1
#define COOLER_AUTO_FAN_PIN -1 #define COOLER_AUTO_FAN_PIN -1
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50
#define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 is full speed
#define CHAMBER_AUTO_FAN_TEMPERATURE 30 //#define EXTRUDER_AUTO_FAN_KICKSTART_TIME 100 // (ms)
#define CHAMBER_AUTO_FAN_SPEED 255 //#define EXTRUDER_AUTO_FAN_KICKSTART_POWER 180 // 64-255
#define COOLER_AUTO_FAN_TEMPERATURE 18
#define COOLER_AUTO_FAN_SPEED 255 #define CHAMBER_AUTO_FAN_TEMPERATURE 28
#define CHAMBER_AUTO_FAN_SPEED 255
#define COOLER_AUTO_FAN_TEMPERATURE 18
#define COOLER_AUTO_FAN_SPEED 255
/** /**
* Hotend Cooling Fans tachometers * Hotend Cooling Fans tachometers

22
config/examples/Creality/CR-10/CrealityV1/Configuration_adv.h
View file

@ -584,6 +584,9 @@
#define CONTROLLERFAN_SPEED_IDLE 0 // (0-255) Idle speed, used when motors are disabled #define CONTROLLERFAN_SPEED_IDLE 0 // (0-255) Idle speed, used when motors are disabled
#define CONTROLLERFAN_IDLE_TIME 60 // (seconds) Extra time to keep the fan running after disabling motors #define CONTROLLERFAN_IDLE_TIME 60 // (seconds) Extra time to keep the fan running after disabling motors
//#define CONTROLLERFAN_KICKSTART_TIME 100 // (ms)
//#define CONTROLLERFAN_KICKSTART_POWER 180 // 64-255
// Use TEMP_SENSOR_BOARD as a trigger for enabling the controller fan // Use TEMP_SENSOR_BOARD as a trigger for enabling the controller fan
//#define CONTROLLER_FAN_MIN_BOARD_TEMP 40 // (°C) Turn on the fan if the board reaches this temperature //#define CONTROLLER_FAN_MIN_BOARD_TEMP 40 // (°C) Turn on the fan if the board reaches this temperature
@ -602,8 +605,8 @@
* gets it spinning reliably for a short time before setting the requested speed. * gets it spinning reliably for a short time before setting the requested speed.
* (Does not work on Sanguinololu with FAN_SOFT_PWM.) * (Does not work on Sanguinololu with FAN_SOFT_PWM.)
*/ */
//#define FAN_KICKSTART_TIME 100 // (ms) //#define EFAN_KICKSTART_TIME 100 // (ms)
//#define FAN_KICKSTART_POWER 180 // 64-255 //#define EFAN_KICKSTART_POWER 180 // 64-255
// Some coolers may require a non-zero "off" state. // Some coolers may require a non-zero "off" state.
//#define FAN_OFF_PWM 1 //#define FAN_OFF_PWM 1
@ -692,12 +695,15 @@
#define CHAMBER_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1
#define COOLER_AUTO_FAN_PIN -1 #define COOLER_AUTO_FAN_PIN -1
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50
#define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 is full speed
#define CHAMBER_AUTO_FAN_TEMPERATURE 30 //#define EXTRUDER_AUTO_FAN_KICKSTART_TIME 100 // (ms)
#define CHAMBER_AUTO_FAN_SPEED 255 //#define EXTRUDER_AUTO_FAN_KICKSTART_POWER 180 // 64-255
#define COOLER_AUTO_FAN_TEMPERATURE 18
#define COOLER_AUTO_FAN_SPEED 255 #define CHAMBER_AUTO_FAN_TEMPERATURE 28
#define CHAMBER_AUTO_FAN_SPEED 255
#define COOLER_AUTO_FAN_TEMPERATURE 18
#define COOLER_AUTO_FAN_SPEED 255
/** /**
* Hotend Cooling Fans tachometers * Hotend Cooling Fans tachometers

22
config/examples/Creality/CR-10S Pro/Configuration_adv.h
View file

@ -584,6 +584,9 @@
#define CONTROLLERFAN_SPEED_IDLE 0 // (0-255) Idle speed, used when motors are disabled #define CONTROLLERFAN_SPEED_IDLE 0 // (0-255) Idle speed, used when motors are disabled
#define CONTROLLERFAN_IDLE_TIME 60 // (seconds) Extra time to keep the fan running after disabling motors #define CONTROLLERFAN_IDLE_TIME 60 // (seconds) Extra time to keep the fan running after disabling motors
//#define CONTROLLERFAN_KICKSTART_TIME 100 // (ms)
//#define CONTROLLERFAN_KICKSTART_POWER 180 // 64-255
// Use TEMP_SENSOR_BOARD as a trigger for enabling the controller fan // Use TEMP_SENSOR_BOARD as a trigger for enabling the controller fan
//#define CONTROLLER_FAN_MIN_BOARD_TEMP 40 // (°C) Turn on the fan if the board reaches this temperature //#define CONTROLLER_FAN_MIN_BOARD_TEMP 40 // (°C) Turn on the fan if the board reaches this temperature
@ -602,8 +605,8 @@
* gets it spinning reliably for a short time before setting the requested speed. * gets it spinning reliably for a short time before setting the requested speed.
* (Does not work on Sanguinololu with FAN_SOFT_PWM.) * (Does not work on Sanguinololu with FAN_SOFT_PWM.)
*/ */
#define FAN_KICKSTART_TIME 100 // (ms) #define EFAN_KICKSTART_TIME 100 // (ms)
//#define FAN_KICKSTART_POWER 180 // 64-255 //#define EFAN_KICKSTART_POWER 180 // 64-255
// Some coolers may require a non-zero "off" state. // Some coolers may require a non-zero "off" state.
//#define FAN_OFF_PWM 1 //#define FAN_OFF_PWM 1
@ -692,12 +695,15 @@
#define CHAMBER_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1
#define COOLER_AUTO_FAN_PIN -1 #define COOLER_AUTO_FAN_PIN -1
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50
#define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 is full speed
#define CHAMBER_AUTO_FAN_TEMPERATURE 30 //#define EXTRUDER_AUTO_FAN_KICKSTART_TIME 100 // (ms)
#define CHAMBER_AUTO_FAN_SPEED 255 //#define EXTRUDER_AUTO_FAN_KICKSTART_POWER 180 // 64-255
#define COOLER_AUTO_FAN_TEMPERATURE 18
#define COOLER_AUTO_FAN_SPEED 255 #define CHAMBER_AUTO_FAN_TEMPERATURE 28
#define CHAMBER_AUTO_FAN_SPEED 255
#define COOLER_AUTO_FAN_TEMPERATURE 18
#define COOLER_AUTO_FAN_SPEED 255
/** /**
* Hotend Cooling Fans tachometers * Hotend Cooling Fans tachometers

22
config/examples/Creality/CR-10S/BigTreeTech SKR 1.4 Turbo TMC2209/Configuration_adv.h
View file

@ -584,6 +584,9 @@
#define CONTROLLERFAN_SPEED_IDLE 0 // (0-255) Idle speed, used when motors are disabled #define CONTROLLERFAN_SPEED_IDLE 0 // (0-255) Idle speed, used when motors are disabled
#define CONTROLLERFAN_IDLE_TIME 60 // (seconds) Extra time to keep the fan running after disabling motors #define CONTROLLERFAN_IDLE_TIME 60 // (seconds) Extra time to keep the fan running after disabling motors
//#define CONTROLLERFAN_KICKSTART_TIME 100 // (ms)
//#define CONTROLLERFAN_KICKSTART_POWER 180 // 64-255
// Use TEMP_SENSOR_BOARD as a trigger for enabling the controller fan // Use TEMP_SENSOR_BOARD as a trigger for enabling the controller fan
//#define CONTROLLER_FAN_MIN_BOARD_TEMP 40 // (°C) Turn on the fan if the board reaches this temperature //#define CONTROLLER_FAN_MIN_BOARD_TEMP 40 // (°C) Turn on the fan if the board reaches this temperature
@ -602,8 +605,8 @@
* gets it spinning reliably for a short time before setting the requested speed. * gets it spinning reliably for a short time before setting the requested speed.
* (Does not work on Sanguinololu with FAN_SOFT_PWM.) * (Does not work on Sanguinololu with FAN_SOFT_PWM.)
*/ */
//#define FAN_KICKSTART_TIME 100 // (ms) //#define EFAN_KICKSTART_TIME 100 // (ms)
//#define FAN_KICKSTART_POWER 180 // 64-255 //#define EFAN_KICKSTART_POWER 180 // 64-255
// Some coolers may require a non-zero "off" state. // Some coolers may require a non-zero "off" state.
//#define FAN_OFF_PWM 1 //#define FAN_OFF_PWM 1
@ -692,12 +695,15 @@
#define CHAMBER_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1
#define COOLER_AUTO_FAN_PIN -1 #define COOLER_AUTO_FAN_PIN -1
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50
#define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 is full speed
#define CHAMBER_AUTO_FAN_TEMPERATURE 30 //#define EXTRUDER_AUTO_FAN_KICKSTART_TIME 100 // (ms)
#define CHAMBER_AUTO_FAN_SPEED 255 //#define EXTRUDER_AUTO_FAN_KICKSTART_POWER 180 // 64-255
#define COOLER_AUTO_FAN_TEMPERATURE 18
#define COOLER_AUTO_FAN_SPEED 255 #define CHAMBER_AUTO_FAN_TEMPERATURE 28
#define CHAMBER_AUTO_FAN_SPEED 255
#define COOLER_AUTO_FAN_TEMPERATURE 18
#define COOLER_AUTO_FAN_SPEED 255
/** /**
* Hotend Cooling Fans tachometers * Hotend Cooling Fans tachometers

22
config/examples/Creality/CR-10S/BigTreeTech SKR 2.0 TMC2209/Configuration_adv.h
View file

@ -584,6 +584,9 @@
#define CONTROLLERFAN_SPEED_IDLE 0 // (0-255) Idle speed, used when motors are disabled #define CONTROLLERFAN_SPEED_IDLE 0 // (0-255) Idle speed, used when motors are disabled
#define CONTROLLERFAN_IDLE_TIME 60 // (seconds) Extra time to keep the fan running after disabling motors #define CONTROLLERFAN_IDLE_TIME 60 // (seconds) Extra time to keep the fan running after disabling motors
//#define CONTROLLERFAN_KICKSTART_TIME 100 // (ms)
//#define CONTROLLERFAN_KICKSTART_POWER 180 // 64-255
// Use TEMP_SENSOR_BOARD as a trigger for enabling the controller fan // Use TEMP_SENSOR_BOARD as a trigger for enabling the controller fan
//#define CONTROLLER_FAN_MIN_BOARD_TEMP 40 // (°C) Turn on the fan if the board reaches this temperature //#define CONTROLLER_FAN_MIN_BOARD_TEMP 40 // (°C) Turn on the fan if the board reaches this temperature
@ -602,8 +605,8 @@
* gets it spinning reliably for a short time before setting the requested speed. * gets it spinning reliably for a short time before setting the requested speed.
* (Does not work on Sanguinololu with FAN_SOFT_PWM.) * (Does not work on Sanguinololu with FAN_SOFT_PWM.)
*/ */
//#define FAN_KICKSTART_TIME 100 // (ms) //#define EFAN_KICKSTART_TIME 100 // (ms)
//#define FAN_KICKSTART_POWER 180 // 64-255 //#define EFAN_KICKSTART_POWER 180 // 64-255
// Some coolers may require a non-zero "off" state. // Some coolers may require a non-zero "off" state.
//#define FAN_OFF_PWM 1 //#define FAN_OFF_PWM 1
@ -692,12 +695,15 @@
#define CHAMBER_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1
#define COOLER_AUTO_FAN_PIN -1 #define COOLER_AUTO_FAN_PIN -1
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50
#define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 is full speed
#define CHAMBER_AUTO_FAN_TEMPERATURE 30 //#define EXTRUDER_AUTO_FAN_KICKSTART_TIME 100 // (ms)
#define CHAMBER_AUTO_FAN_SPEED 255 //#define EXTRUDER_AUTO_FAN_KICKSTART_POWER 180 // 64-255
#define COOLER_AUTO_FAN_TEMPERATURE 18
#define COOLER_AUTO_FAN_SPEED 255 #define CHAMBER_AUTO_FAN_TEMPERATURE 28
#define CHAMBER_AUTO_FAN_SPEED 255
#define COOLER_AUTO_FAN_TEMPERATURE 18
#define COOLER_AUTO_FAN_SPEED 255
/** /**
* Hotend Cooling Fans tachometers * Hotend Cooling Fans tachometers

22
config/examples/Creality/CR-10S/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h
View file

@ -584,6 +584,9 @@
#define CONTROLLERFAN_SPEED_IDLE 0 // (0-255) Idle speed, used when motors are disabled #define CONTROLLERFAN_SPEED_IDLE 0 // (0-255) Idle speed, used when motors are disabled
#define CONTROLLERFAN_IDLE_TIME 60 // (seconds) Extra time to keep the fan running after disabling motors #define CONTROLLERFAN_IDLE_TIME 60 // (seconds) Extra time to keep the fan running after disabling motors
//#define CONTROLLERFAN_KICKSTART_TIME 100 // (ms)
//#define CONTROLLERFAN_KICKSTART_POWER 180 // 64-255
// Use TEMP_SENSOR_BOARD as a trigger for enabling the controller fan // Use TEMP_SENSOR_BOARD as a trigger for enabling the controller fan
//#define CONTROLLER_FAN_MIN_BOARD_TEMP 40 // (°C) Turn on the fan if the board reaches this temperature //#define CONTROLLER_FAN_MIN_BOARD_TEMP 40 // (°C) Turn on the fan if the board reaches this temperature
@ -602,8 +605,8 @@
* gets it spinning reliably for a short time before setting the requested speed. * gets it spinning reliably for a short time before setting the requested speed.
* (Does not work on Sanguinololu with FAN_SOFT_PWM.) * (Does not work on Sanguinololu with FAN_SOFT_PWM.)
*/ */
//#define FAN_KICKSTART_TIME 100 // (ms) //#define EFAN_KICKSTART_TIME 100 // (ms)
//#define FAN_KICKSTART_POWER 180 // 64-255 //#define EFAN_KICKSTART_POWER 180 // 64-255
// Some coolers may require a non-zero "off" state. // Some coolers may require a non-zero "off" state.
//#define FAN_OFF_PWM 1 //#define FAN_OFF_PWM 1
@ -692,12 +695,15 @@
#define CHAMBER_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1
#define COOLER_AUTO_FAN_PIN -1 #define COOLER_AUTO_FAN_PIN -1
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50
#define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 is full speed
#define CHAMBER_AUTO_FAN_TEMPERATURE 30 //#define EXTRUDER_AUTO_FAN_KICKSTART_TIME 100 // (ms)
#define CHAMBER_AUTO_FAN_SPEED 255 //#define EXTRUDER_AUTO_FAN_KICKSTART_POWER 180 // 64-255
#define COOLER_AUTO_FAN_TEMPERATURE 18
#define COOLER_AUTO_FAN_SPEED 255 #define CHAMBER_AUTO_FAN_TEMPERATURE 28
#define CHAMBER_AUTO_FAN_SPEED 255
#define COOLER_AUTO_FAN_TEMPERATURE 18
#define COOLER_AUTO_FAN_SPEED 255
/** /**
* Hotend Cooling Fans tachometers * Hotend Cooling Fans tachometers

22
config/examples/Creality/CR-10S/BigTreeTech SKR Pro v1.2/Configuration_adv.h
View file

@ -584,6 +584,9 @@
#define CONTROLLERFAN_SPEED_IDLE 0 // (0-255) Idle speed, used when motors are disabled #define CONTROLLERFAN_SPEED_IDLE 0 // (0-255) Idle speed, used when motors are disabled
#define CONTROLLERFAN_IDLE_TIME 60 // (seconds) Extra time to keep the fan running after disabling motors #define CONTROLLERFAN_IDLE_TIME 60 // (seconds) Extra time to keep the fan running after disabling motors
//#define CONTROLLERFAN_KICKSTART_TIME 100 // (ms)
//#define CONTROLLERFAN_KICKSTART_POWER 180 // 64-255
// Use TEMP_SENSOR_BOARD as a trigger for enabling the controller fan // Use TEMP_SENSOR_BOARD as a trigger for enabling the controller fan
//#define CONTROLLER_FAN_MIN_BOARD_TEMP 40 // (°C) Turn on the fan if the board reaches this temperature //#define CONTROLLER_FAN_MIN_BOARD_TEMP 40 // (°C) Turn on the fan if the board reaches this temperature
@ -602,8 +605,8 @@
* gets it spinning reliably for a short time before setting the requested speed. * gets it spinning reliably for a short time before setting the requested speed.
* (Does not work on Sanguinololu with FAN_SOFT_PWM.) * (Does not work on Sanguinololu with FAN_SOFT_PWM.)
*/ */
//#define FAN_KICKSTART_TIME 100 // (ms) //#define EFAN_KICKSTART_TIME 100 // (ms)
//#define FAN_KICKSTART_POWER 180 // 64-255 //#define EFAN_KICKSTART_POWER 180 // 64-255
// Some coolers may require a non-zero "off" state. // Some coolers may require a non-zero "off" state.
//#define FAN_OFF_PWM 1 //#define FAN_OFF_PWM 1
@ -692,12 +695,15 @@
#define CHAMBER_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1
#define COOLER_AUTO_FAN_PIN -1 #define COOLER_AUTO_FAN_PIN -1
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50
#define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 is full speed
#define CHAMBER_AUTO_FAN_TEMPERATURE 30 //#define EXTRUDER_AUTO_FAN_KICKSTART_TIME 100 // (ms)
#define CHAMBER_AUTO_FAN_SPEED 255 //#define EXTRUDER_AUTO_FAN_KICKSTART_POWER 180 // 64-255
#define COOLER_AUTO_FAN_TEMPERATURE 18
#define COOLER_AUTO_FAN_SPEED 255 #define CHAMBER_AUTO_FAN_TEMPERATURE 28
#define CHAMBER_AUTO_FAN_SPEED 255
#define COOLER_AUTO_FAN_TEMPERATURE 18
#define COOLER_AUTO_FAN_SPEED 255
/** /**
* Hotend Cooling Fans tachometers * Hotend Cooling Fans tachometers

22
config/examples/Creality/CR-10S/CrealityV1/Configuration_adv.h
View file

@ -584,6 +584,9 @@
#define CONTROLLERFAN_SPEED_IDLE 0 // (0-255) Idle speed, used when motors are disabled #define CONTROLLERFAN_SPEED_IDLE 0 // (0-255) Idle speed, used when motors are disabled
#define CONTROLLERFAN_IDLE_TIME 60 // (seconds) Extra time to keep the fan running after disabling motors #define CONTROLLERFAN_IDLE_TIME 60 // (seconds) Extra time to keep the fan running after disabling motors
//#define CONTROLLERFAN_KICKSTART_TIME 100 // (ms)
//#define CONTROLLERFAN_KICKSTART_POWER 180 // 64-255
// Use TEMP_SENSOR_BOARD as a trigger for enabling the controller fan // Use TEMP_SENSOR_BOARD as a trigger for enabling the controller fan
//#define CONTROLLER_FAN_MIN_BOARD_TEMP 40 // (°C) Turn on the fan if the board reaches this temperature //#define CONTROLLER_FAN_MIN_BOARD_TEMP 40 // (°C) Turn on the fan if the board reaches this temperature
@ -602,8 +605,8 @@
* gets it spinning reliably for a short time before setting the requested speed. * gets it spinning reliably for a short time before setting the requested speed.
* (Does not work on Sanguinololu with FAN_SOFT_PWM.) * (Does not work on Sanguinololu with FAN_SOFT_PWM.)
*/ */
//#define FAN_KICKSTART_TIME 100 // (ms) //#define EFAN_KICKSTART_TIME 100 // (ms)
//#define FAN_KICKSTART_POWER 180 // 64-255 //#define EFAN_KICKSTART_POWER 180 // 64-255
// Some coolers may require a non-zero "off" state. // Some coolers may require a non-zero "off" state.
//#define FAN_OFF_PWM 1 //#define FAN_OFF_PWM 1
@ -692,12 +695,15 @@
#define CHAMBER_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1
#define COOLER_AUTO_FAN_PIN -1 #define COOLER_AUTO_FAN_PIN -1
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50
#define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 is full speed
#define CHAMBER_AUTO_FAN_TEMPERATURE 30 //#define EXTRUDER_AUTO_FAN_KICKSTART_TIME 100 // (ms)
#define CHAMBER_AUTO_FAN_SPEED 255 //#define EXTRUDER_AUTO_FAN_KICKSTART_POWER 180 // 64-255
#define COOLER_AUTO_FAN_TEMPERATURE 18
#define COOLER_AUTO_FAN_SPEED 255 #define CHAMBER_AUTO_FAN_TEMPERATURE 28
#define CHAMBER_AUTO_FAN_SPEED 255
#define COOLER_AUTO_FAN_TEMPERATURE 18
#define COOLER_AUTO_FAN_SPEED 255
/** /**
* Hotend Cooling Fans tachometers * Hotend Cooling Fans tachometers

22
config/examples/Creality/CR-20 Pro/Configuration_adv.h
View file

@ -584,6 +584,9 @@
#define CONTROLLERFAN_SPEED_IDLE 0 // (0-255) Idle speed, used when motors are disabled #define CONTROLLERFAN_SPEED_IDLE 0 // (0-255) Idle speed, used when motors are disabled
#define CONTROLLERFAN_IDLE_TIME 60 // (seconds) Extra time to keep the fan running after disabling motors #define CONTROLLERFAN_IDLE_TIME 60 // (seconds) Extra time to keep the fan running after disabling motors
//#define CONTROLLERFAN_KICKSTART_TIME 100 // (ms)
//#define CONTROLLERFAN_KICKSTART_POWER 180 // 64-255
// Use TEMP_SENSOR_BOARD as a trigger for enabling the controller fan // Use TEMP_SENSOR_BOARD as a trigger for enabling the controller fan
//#define CONTROLLER_FAN_MIN_BOARD_TEMP 40 // (°C) Turn on the fan if the board reaches this temperature //#define CONTROLLER_FAN_MIN_BOARD_TEMP 40 // (°C) Turn on the fan if the board reaches this temperature
@ -602,8 +605,8 @@
* gets it spinning reliably for a short time before setting the requested speed. * gets it spinning reliably for a short time before setting the requested speed.
* (Does not work on Sanguinololu with FAN_SOFT_PWM.) * (Does not work on Sanguinololu with FAN_SOFT_PWM.)
*/ */
//#define FAN_KICKSTART_TIME 100 // (ms) //#define EFAN_KICKSTART_TIME 100 // (ms)
//#define FAN_KICKSTART_POWER 180 // 64-255 //#define EFAN_KICKSTART_POWER 180 // 64-255
// Some coolers may require a non-zero "off" state. // Some coolers may require a non-zero "off" state.
//#define FAN_OFF_PWM 1 //#define FAN_OFF_PWM 1
@ -692,12 +695,15 @@
#define CHAMBER_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1
#define COOLER_AUTO_FAN_PIN -1 #define COOLER_AUTO_FAN_PIN -1
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50
#define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 is full speed
#define CHAMBER_AUTO_FAN_TEMPERATURE 30 //#define EXTRUDER_AUTO_FAN_KICKSTART_TIME 100 // (ms)
#define CHAMBER_AUTO_FAN_SPEED 255 //#define EXTRUDER_AUTO_FAN_KICKSTART_POWER 180 // 64-255
#define COOLER_AUTO_FAN_TEMPERATURE 18
#define COOLER_AUTO_FAN_SPEED 255 #define CHAMBER_AUTO_FAN_TEMPERATURE 28
#define CHAMBER_AUTO_FAN_SPEED 255
#define COOLER_AUTO_FAN_TEMPERATURE 18
#define COOLER_AUTO_FAN_SPEED 255
/** /**
* Hotend Cooling Fans tachometers * Hotend Cooling Fans tachometers

22
config/examples/Creality/CR-20/RepRapWorld Minitronics20/Configuration_adv.h
View file

@ -584,6 +584,9 @@
#define CONTROLLERFAN_SPEED_IDLE 0 // (0-255) Idle speed, used when motors are disabled #define CONTROLLERFAN_SPEED_IDLE 0 // (0-255) Idle speed, used when motors are disabled
#define CONTROLLERFAN_IDLE_TIME 60 // (seconds) Extra time to keep the fan running after disabling motors #define CONTROLLERFAN_IDLE_TIME 60 // (seconds) Extra time to keep the fan running after disabling motors
//#define CONTROLLERFAN_KICKSTART_TIME 100 // (ms)
//#define CONTROLLERFAN_KICKSTART_POWER 180 // 64-255
// Use TEMP_SENSOR_BOARD as a trigger for enabling the controller fan // Use TEMP_SENSOR_BOARD as a trigger for enabling the controller fan
//#define CONTROLLER_FAN_MIN_BOARD_TEMP 40 // (°C) Turn on the fan if the board reaches this temperature //#define CONTROLLER_FAN_MIN_BOARD_TEMP 40 // (°C) Turn on the fan if the board reaches this temperature
@ -602,8 +605,8 @@
* gets it spinning reliably for a short time before setting the requested speed. * gets it spinning reliably for a short time before setting the requested speed.
* (Does not work on Sanguinololu with FAN_SOFT_PWM.) * (Does not work on Sanguinololu with FAN_SOFT_PWM.)
*/ */
//#define FAN_KICKSTART_TIME 100 // (ms) //#define EFAN_KICKSTART_TIME 100 // (ms)
//#define FAN_KICKSTART_POWER 180 // 64-255 //#define EFAN_KICKSTART_POWER 180 // 64-255
// Some coolers may require a non-zero "off" state. // Some coolers may require a non-zero "off" state.
//#define FAN_OFF_PWM 1 //#define FAN_OFF_PWM 1
@ -692,12 +695,15 @@
#define CHAMBER_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1
#define COOLER_AUTO_FAN_PIN -1 #define COOLER_AUTO_FAN_PIN -1
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50
#define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 is full speed
#define CHAMBER_AUTO_FAN_TEMPERATURE 30 //#define EXTRUDER_AUTO_FAN_KICKSTART_TIME 100 // (ms)
#define CHAMBER_AUTO_FAN_SPEED 255 //#define EXTRUDER_AUTO_FAN_KICKSTART_POWER 180 // 64-255
#define COOLER_AUTO_FAN_TEMPERATURE 18
#define COOLER_AUTO_FAN_SPEED 255 #define CHAMBER_AUTO_FAN_TEMPERATURE 28
#define CHAMBER_AUTO_FAN_SPEED 255
#define COOLER_AUTO_FAN_TEMPERATURE 18
#define COOLER_AUTO_FAN_SPEED 255
/** /**
* Hotend Cooling Fans tachometers * Hotend Cooling Fans tachometers

22
config/examples/Creality/CR-20/Stock/Configuration_adv.h
View file

@ -584,6 +584,9 @@
#define CONTROLLERFAN_SPEED_IDLE 0 // (0-255) Idle speed, used when motors are disabled #define CONTROLLERFAN_SPEED_IDLE 0 // (0-255) Idle speed, used when motors are disabled
#define CONTROLLERFAN_IDLE_TIME 60 // (seconds) Extra time to keep the fan running after disabling motors #define CONTROLLERFAN_IDLE_TIME 60 // (seconds) Extra time to keep the fan running after disabling motors
//#define CONTROLLERFAN_KICKSTART_TIME 100 // (ms)
//#define CONTROLLERFAN_KICKSTART_POWER 180 // 64-255
// Use TEMP_SENSOR_BOARD as a trigger for enabling the controller fan // Use TEMP_SENSOR_BOARD as a trigger for enabling the controller fan
//#define CONTROLLER_FAN_MIN_BOARD_TEMP 40 // (°C) Turn on the fan if the board reaches this temperature //#define CONTROLLER_FAN_MIN_BOARD_TEMP 40 // (°C) Turn on the fan if the board reaches this temperature
@ -602,8 +605,8 @@
* gets it spinning reliably for a short time before setting the requested speed. * gets it spinning reliably for a short time before setting the requested speed.
* (Does not work on Sanguinololu with FAN_SOFT_PWM.) * (Does not work on Sanguinololu with FAN_SOFT_PWM.)
*/ */
//#define FAN_KICKSTART_TIME 100 // (ms) //#define EFAN_KICKSTART_TIME 100 // (ms)
//#define FAN_KICKSTART_POWER 180 // 64-255 //#define EFAN_KICKSTART_POWER 180 // 64-255
// Some coolers may require a non-zero "off" state. // Some coolers may require a non-zero "off" state.
//#define FAN_OFF_PWM 1 //#define FAN_OFF_PWM 1
@ -692,12 +695,15 @@
#define CHAMBER_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1
#define COOLER_AUTO_FAN_PIN -1 #define COOLER_AUTO_FAN_PIN -1
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50
#define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 is full speed
#define CHAMBER_AUTO_FAN_TEMPERATURE 30 //#define EXTRUDER_AUTO_FAN_KICKSTART_TIME 100 // (ms)
#define CHAMBER_AUTO_FAN_SPEED 255 //#define EXTRUDER_AUTO_FAN_KICKSTART_POWER 180 // 64-255
#define COOLER_AUTO_FAN_TEMPERATURE 18
#define COOLER_AUTO_FAN_SPEED 255 #define CHAMBER_AUTO_FAN_TEMPERATURE 28
#define CHAMBER_AUTO_FAN_SPEED 255
#define COOLER_AUTO_FAN_TEMPERATURE 18
#define COOLER_AUTO_FAN_SPEED 255
/** /**
* Hotend Cooling Fans tachometers * Hotend Cooling Fans tachometers

22
config/examples/Creality/CR-30 PrintMill/Configuration_adv.h
View file

@ -584,6 +584,9 @@
#define CONTROLLERFAN_SPEED_IDLE 0 // (0-255) Idle speed, used when motors are disabled #define CONTROLLERFAN_SPEED_IDLE 0 // (0-255) Idle speed, used when motors are disabled
#define CONTROLLERFAN_IDLE_TIME 60 // (seconds) Extra time to keep the fan running after disabling motors #define CONTROLLERFAN_IDLE_TIME 60 // (seconds) Extra time to keep the fan running after disabling motors
//#define CONTROLLERFAN_KICKSTART_TIME 100 // (ms)
//#define CONTROLLERFAN_KICKSTART_POWER 180 // 64-255
// Use TEMP_SENSOR_BOARD as a trigger for enabling the controller fan // Use TEMP_SENSOR_BOARD as a trigger for enabling the controller fan
//#define CONTROLLER_FAN_MIN_BOARD_TEMP 40 // (°C) Turn on the fan if the board reaches this temperature //#define CONTROLLER_FAN_MIN_BOARD_TEMP 40 // (°C) Turn on the fan if the board reaches this temperature
@ -602,8 +605,8 @@
* gets it spinning reliably for a short time before setting the requested speed. * gets it spinning reliably for a short time before setting the requested speed.
* (Does not work on Sanguinololu with FAN_SOFT_PWM.) * (Does not work on Sanguinololu with FAN_SOFT_PWM.)
*/ */
//#define FAN_KICKSTART_TIME 100 // (ms) //#define EFAN_KICKSTART_TIME 100 // (ms)
//#define FAN_KICKSTART_POWER 180 // 64-255 //#define EFAN_KICKSTART_POWER 180 // 64-255
// Some coolers may require a non-zero "off" state. // Some coolers may require a non-zero "off" state.
//#define FAN_OFF_PWM 1 //#define FAN_OFF_PWM 1
@ -692,12 +695,15 @@
#define CHAMBER_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1
#define COOLER_AUTO_FAN_PIN -1 #define COOLER_AUTO_FAN_PIN -1
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50
#define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 is full speed
#define CHAMBER_AUTO_FAN_TEMPERATURE 30 //#define EXTRUDER_AUTO_FAN_KICKSTART_TIME 100 // (ms)
#define CHAMBER_AUTO_FAN_SPEED 255 //#define EXTRUDER_AUTO_FAN_KICKSTART_POWER 180 // 64-255
#define COOLER_AUTO_FAN_TEMPERATURE 18
#define COOLER_AUTO_FAN_SPEED 255 #define CHAMBER_AUTO_FAN_TEMPERATURE 28
#define CHAMBER_AUTO_FAN_SPEED 255
#define COOLER_AUTO_FAN_TEMPERATURE 18
#define COOLER_AUTO_FAN_SPEED 255
/** /**
* Hotend Cooling Fans tachometers * Hotend Cooling Fans tachometers

22
config/examples/Creality/CR-6 SE/Configuration_adv.h
View file

@ -584,6 +584,9 @@
#define CONTROLLERFAN_SPEED_IDLE 0 // (0-255) Idle speed, used when motors are disabled #define CONTROLLERFAN_SPEED_IDLE 0 // (0-255) Idle speed, used when motors are disabled
#define CONTROLLERFAN_IDLE_TIME 60 // (seconds) Extra time to keep the fan running after disabling motors #define CONTROLLERFAN_IDLE_TIME 60 // (seconds) Extra time to keep the fan running after disabling motors
//#define CONTROLLERFAN_KICKSTART_TIME 100 // (ms)
//#define CONTROLLERFAN_KICKSTART_POWER 180 // 64-255
// Use TEMP_SENSOR_BOARD as a trigger for enabling the controller fan // Use TEMP_SENSOR_BOARD as a trigger for enabling the controller fan
//#define CONTROLLER_FAN_MIN_BOARD_TEMP 40 // (°C) Turn on the fan if the board reaches this temperature //#define CONTROLLER_FAN_MIN_BOARD_TEMP 40 // (°C) Turn on the fan if the board reaches this temperature
@ -602,8 +605,8 @@
* gets it spinning reliably for a short time before setting the requested speed. * gets it spinning reliably for a short time before setting the requested speed.
* (Does not work on Sanguinololu with FAN_SOFT_PWM.) * (Does not work on Sanguinololu with FAN_SOFT_PWM.)
*/ */
//#define FAN_KICKSTART_TIME 100 // (ms) //#define EFAN_KICKSTART_TIME 100 // (ms)
//#define FAN_KICKSTART_POWER 180 // 64-255 //#define EFAN_KICKSTART_POWER 180 // 64-255
// Some coolers may require a non-zero "off" state. // Some coolers may require a non-zero "off" state.
//#define FAN_OFF_PWM 1 //#define FAN_OFF_PWM 1
@ -692,12 +695,15 @@
#define CHAMBER_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1
#define COOLER_AUTO_FAN_PIN -1 #define COOLER_AUTO_FAN_PIN -1
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50
#define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 is full speed
#define CHAMBER_AUTO_FAN_TEMPERATURE 30 //#define EXTRUDER_AUTO_FAN_KICKSTART_TIME 100 // (ms)
#define CHAMBER_AUTO_FAN_SPEED 255 //#define EXTRUDER_AUTO_FAN_KICKSTART_POWER 180 // 64-255
#define COOLER_AUTO_FAN_TEMPERATURE 18
#define COOLER_AUTO_FAN_SPEED 255 #define CHAMBER_AUTO_FAN_TEMPERATURE 28
#define CHAMBER_AUTO_FAN_SPEED 255
#define COOLER_AUTO_FAN_TEMPERATURE 18
#define COOLER_AUTO_FAN_SPEED 255
/** /**
* Hotend Cooling Fans tachometers * Hotend Cooling Fans tachometers

22
config/examples/Creality/CR-8/Configuration_adv.h
View file

@ -584,6 +584,9 @@
#define CONTROLLERFAN_SPEED_IDLE 0 // (0-255) Idle speed, used when motors are disabled #define CONTROLLERFAN_SPEED_IDLE 0 // (0-255) Idle speed, used when motors are disabled
#define CONTROLLERFAN_IDLE_TIME 60 // (seconds) Extra time to keep the fan running after disabling motors #define CONTROLLERFAN_IDLE_TIME 60 // (seconds) Extra time to keep the fan running after disabling motors
//#define CONTROLLERFAN_KICKSTART_TIME 100 // (ms)
//#define CONTROLLERFAN_KICKSTART_POWER 180 // 64-255
// Use TEMP_SENSOR_BOARD as a trigger for enabling the controller fan // Use TEMP_SENSOR_BOARD as a trigger for enabling the controller fan
//#define CONTROLLER_FAN_MIN_BOARD_TEMP 40 // (°C) Turn on the fan if the board reaches this temperature //#define CONTROLLER_FAN_MIN_BOARD_TEMP 40 // (°C) Turn on the fan if the board reaches this temperature
@ -602,8 +605,8 @@
* gets it spinning reliably for a short time before setting the requested speed. * gets it spinning reliably for a short time before setting the requested speed.
* (Does not work on Sanguinololu with FAN_SOFT_PWM.) * (Does not work on Sanguinololu with FAN_SOFT_PWM.)
*/ */
//#define FAN_KICKSTART_TIME 100 // (ms) //#define EFAN_KICKSTART_TIME 100 // (ms)
//#define FAN_KICKSTART_POWER 180 // 64-255 //#define EFAN_KICKSTART_POWER 180 // 64-255
// Some coolers may require a non-zero "off" state. // Some coolers may require a non-zero "off" state.
//#define FAN_OFF_PWM 1 //#define FAN_OFF_PWM 1
@ -692,12 +695,15 @@
#define CHAMBER_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1
#define COOLER_AUTO_FAN_PIN -1 #define COOLER_AUTO_FAN_PIN -1
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50
#define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 is full speed
#define CHAMBER_AUTO_FAN_TEMPERATURE 30 //#define EXTRUDER_AUTO_FAN_KICKSTART_TIME 100 // (ms)
#define CHAMBER_AUTO_FAN_SPEED 255 //#define EXTRUDER_AUTO_FAN_KICKSTART_POWER 180 // 64-255
#define COOLER_AUTO_FAN_TEMPERATURE 18
#define COOLER_AUTO_FAN_SPEED 255 #define CHAMBER_AUTO_FAN_TEMPERATURE 28
#define CHAMBER_AUTO_FAN_SPEED 255
#define COOLER_AUTO_FAN_TEMPERATURE 18
#define COOLER_AUTO_FAN_SPEED 255
/** /**
* Hotend Cooling Fans tachometers * Hotend Cooling Fans tachometers

22
config/examples/Creality/Ender-2 Pro/CrealityV423/Configuration_adv.h
View file

@ -584,6 +584,9 @@
#define CONTROLLERFAN_SPEED_IDLE 0 // (0-255) Idle speed, used when motors are disabled #define CONTROLLERFAN_SPEED_IDLE 0 // (0-255) Idle speed, used when motors are disabled
#define CONTROLLERFAN_IDLE_TIME 60 // (seconds) Extra time to keep the fan running after disabling motors #define CONTROLLERFAN_IDLE_TIME 60 // (seconds) Extra time to keep the fan running after disabling motors
//#define CONTROLLERFAN_KICKSTART_TIME 100 // (ms)
//#define CONTROLLERFAN_KICKSTART_POWER 180 // 64-255
// Use TEMP_SENSOR_BOARD as a trigger for enabling the controller fan // Use TEMP_SENSOR_BOARD as a trigger for enabling the controller fan
//#define CONTROLLER_FAN_MIN_BOARD_TEMP 40 // (°C) Turn on the fan if the board reaches this temperature //#define CONTROLLER_FAN_MIN_BOARD_TEMP 40 // (°C) Turn on the fan if the board reaches this temperature
@ -602,8 +605,8 @@
* gets it spinning reliably for a short time before setting the requested speed. * gets it spinning reliably for a short time before setting the requested speed.
* (Does not work on Sanguinololu with FAN_SOFT_PWM.) * (Does not work on Sanguinololu with FAN_SOFT_PWM.)
*/ */
//#define FAN_KICKSTART_TIME 100 // (ms) //#define EFAN_KICKSTART_TIME 100 // (ms)
//#define FAN_KICKSTART_POWER 180 // 64-255 //#define EFAN_KICKSTART_POWER 180 // 64-255
// Some coolers may require a non-zero "off" state. // Some coolers may require a non-zero "off" state.
//#define FAN_OFF_PWM 1 //#define FAN_OFF_PWM 1
@ -692,12 +695,15 @@
#define CHAMBER_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1
#define COOLER_AUTO_FAN_PIN -1 #define COOLER_AUTO_FAN_PIN -1
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50
#define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 is full speed
#define CHAMBER_AUTO_FAN_TEMPERATURE 30 //#define EXTRUDER_AUTO_FAN_KICKSTART_TIME 100 // (ms)
#define CHAMBER_AUTO_FAN_SPEED 255 //#define EXTRUDER_AUTO_FAN_KICKSTART_POWER 180 // 64-255
#define COOLER_AUTO_FAN_TEMPERATURE 18
#define COOLER_AUTO_FAN_SPEED 255 #define CHAMBER_AUTO_FAN_TEMPERATURE 28
#define CHAMBER_AUTO_FAN_SPEED 255
#define COOLER_AUTO_FAN_TEMPERATURE 18
#define COOLER_AUTO_FAN_SPEED 255
/** /**
* Hotend Cooling Fans tachometers * Hotend Cooling Fans tachometers

22
config/examples/Creality/Ender-2/Configuration_adv.h
View file

@ -584,6 +584,9 @@
#define CONTROLLERFAN_SPEED_IDLE 0 // (0-255) Idle speed, used when motors are disabled #define CONTROLLERFAN_SPEED_IDLE 0 // (0-255) Idle speed, used when motors are disabled
#define CONTROLLERFAN_IDLE_TIME 60 // (seconds) Extra time to keep the fan running after disabling motors #define CONTROLLERFAN_IDLE_TIME 60 // (seconds) Extra time to keep the fan running after disabling motors
//#define CONTROLLERFAN_KICKSTART_TIME 100 // (ms)
//#define CONTROLLERFAN_KICKSTART_POWER 180 // 64-255
// Use TEMP_SENSOR_BOARD as a trigger for enabling the controller fan // Use TEMP_SENSOR_BOARD as a trigger for enabling the controller fan
//#define CONTROLLER_FAN_MIN_BOARD_TEMP 40 // (°C) Turn on the fan if the board reaches this temperature //#define CONTROLLER_FAN_MIN_BOARD_TEMP 40 // (°C) Turn on the fan if the board reaches this temperature
@ -602,8 +605,8 @@
* gets it spinning reliably for a short time before setting the requested speed. * gets it spinning reliably for a short time before setting the requested speed.
* (Does not work on Sanguinololu with FAN_SOFT_PWM.) * (Does not work on Sanguinololu with FAN_SOFT_PWM.)
*/ */
//#define FAN_KICKSTART_TIME 100 // (ms) //#define EFAN_KICKSTART_TIME 100 // (ms)
//#define FAN_KICKSTART_POWER 180 // 64-255 //#define EFAN_KICKSTART_POWER 180 // 64-255
// Some coolers may require a non-zero "off" state. // Some coolers may require a non-zero "off" state.
//#define FAN_OFF_PWM 1 //#define FAN_OFF_PWM 1
@ -692,12 +695,15 @@
#define CHAMBER_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1
#define COOLER_AUTO_FAN_PIN -1 #define COOLER_AUTO_FAN_PIN -1
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50
#define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 is full speed
#define CHAMBER_AUTO_FAN_TEMPERATURE 30 //#define EXTRUDER_AUTO_FAN_KICKSTART_TIME 100 // (ms)
#define CHAMBER_AUTO_FAN_SPEED 255 //#define EXTRUDER_AUTO_FAN_KICKSTART_POWER 180 // 64-255
#define COOLER_AUTO_FAN_TEMPERATURE 18
#define COOLER_AUTO_FAN_SPEED 255 #define CHAMBER_AUTO_FAN_TEMPERATURE 28
#define CHAMBER_AUTO_FAN_SPEED 255
#define COOLER_AUTO_FAN_TEMPERATURE 18
#define COOLER_AUTO_FAN_SPEED 255
/** /**
* Hotend Cooling Fans tachometers * Hotend Cooling Fans tachometers

22
config/examples/Creality/Ender-3 Max Neo/Configuration_adv.h
View file

@ -584,6 +584,9 @@
#define CONTROLLERFAN_SPEED_IDLE 0 // (0-255) Idle speed, used when motors are disabled #define CONTROLLERFAN_SPEED_IDLE 0 // (0-255) Idle speed, used when motors are disabled
#define CONTROLLERFAN_IDLE_TIME 60 // (seconds) Extra time to keep the fan running after disabling motors #define CONTROLLERFAN_IDLE_TIME 60 // (seconds) Extra time to keep the fan running after disabling motors
//#define CONTROLLERFAN_KICKSTART_TIME 100 // (ms)
//#define CONTROLLERFAN_KICKSTART_POWER 180 // 64-255
// Use TEMP_SENSOR_BOARD as a trigger for enabling the controller fan // Use TEMP_SENSOR_BOARD as a trigger for enabling the controller fan
//#define CONTROLLER_FAN_MIN_BOARD_TEMP 40 // (°C) Turn on the fan if the board reaches this temperature //#define CONTROLLER_FAN_MIN_BOARD_TEMP 40 // (°C) Turn on the fan if the board reaches this temperature
@ -602,8 +605,8 @@
* gets it spinning reliably for a short time before setting the requested speed. * gets it spinning reliably for a short time before setting the requested speed.
* (Does not work on Sanguinololu with FAN_SOFT_PWM.) * (Does not work on Sanguinololu with FAN_SOFT_PWM.)
*/ */
//#define FAN_KICKSTART_TIME 100 // (ms) //#define EFAN_KICKSTART_TIME 100 // (ms)
//#define FAN_KICKSTART_POWER 180 // 64-255 //#define EFAN_KICKSTART_POWER 180 // 64-255
// Some coolers may require a non-zero "off" state. // Some coolers may require a non-zero "off" state.
//#define FAN_OFF_PWM 1 //#define FAN_OFF_PWM 1
@ -692,12 +695,15 @@
#define CHAMBER_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1
#define COOLER_AUTO_FAN_PIN -1 #define COOLER_AUTO_FAN_PIN -1
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50
#define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 is full speed
#define CHAMBER_AUTO_FAN_TEMPERATURE 30 //#define EXTRUDER_AUTO_FAN_KICKSTART_TIME 100 // (ms)
#define CHAMBER_AUTO_FAN_SPEED 255 //#define EXTRUDER_AUTO_FAN_KICKSTART_POWER 180 // 64-255
#define COOLER_AUTO_FAN_TEMPERATURE 18
#define COOLER_AUTO_FAN_SPEED 255 #define CHAMBER_AUTO_FAN_TEMPERATURE 28
#define CHAMBER_AUTO_FAN_SPEED 255
#define COOLER_AUTO_FAN_TEMPERATURE 18
#define COOLER_AUTO_FAN_SPEED 255
/** /**
* Hotend Cooling Fans tachometers * Hotend Cooling Fans tachometers

22
config/examples/Creality/Ender-3 Max/Configuration_adv.h
View file

@ -584,6 +584,9 @@
#define CONTROLLERFAN_SPEED_IDLE 0 // (0-255) Idle speed, used when motors are disabled #define CONTROLLERFAN_SPEED_IDLE 0 // (0-255) Idle speed, used when motors are disabled
#define CONTROLLERFAN_IDLE_TIME 60 // (seconds) Extra time to keep the fan running after disabling motors #define CONTROLLERFAN_IDLE_TIME 60 // (seconds) Extra time to keep the fan running after disabling motors
//#define CONTROLLERFAN_KICKSTART_TIME 100 // (ms)
//#define CONTROLLERFAN_KICKSTART_POWER 180 // 64-255
// Use TEMP_SENSOR_BOARD as a trigger for enabling the controller fan // Use TEMP_SENSOR_BOARD as a trigger for enabling the controller fan
//#define CONTROLLER_FAN_MIN_BOARD_TEMP 40 // (°C) Turn on the fan if the board reaches this temperature //#define CONTROLLER_FAN_MIN_BOARD_TEMP 40 // (°C) Turn on the fan if the board reaches this temperature
@ -602,8 +605,8 @@
* gets it spinning reliably for a short time before setting the requested speed. * gets it spinning reliably for a short time before setting the requested speed.
* (Does not work on Sanguinololu with FAN_SOFT_PWM.) * (Does not work on Sanguinololu with FAN_SOFT_PWM.)
*/ */
//#define FAN_KICKSTART_TIME 100 // (ms) //#define EFAN_KICKSTART_TIME 100 // (ms)
//#define FAN_KICKSTART_POWER 180 // 64-255 //#define EFAN_KICKSTART_POWER 180 // 64-255
// Some coolers may require a non-zero "off" state. // Some coolers may require a non-zero "off" state.
//#define FAN_OFF_PWM 1 //#define FAN_OFF_PWM 1
@ -692,12 +695,15 @@
#define CHAMBER_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1
#define COOLER_AUTO_FAN_PIN -1 #define COOLER_AUTO_FAN_PIN -1
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50
#define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 is full speed
#define CHAMBER_AUTO_FAN_TEMPERATURE 30 //#define EXTRUDER_AUTO_FAN_KICKSTART_TIME 100 // (ms)
#define CHAMBER_AUTO_FAN_SPEED 255 //#define EXTRUDER_AUTO_FAN_KICKSTART_POWER 180 // 64-255
#define COOLER_AUTO_FAN_TEMPERATURE 18
#define COOLER_AUTO_FAN_SPEED 255 #define CHAMBER_AUTO_FAN_TEMPERATURE 28
#define CHAMBER_AUTO_FAN_SPEED 255
#define COOLER_AUTO_FAN_TEMPERATURE 18
#define COOLER_AUTO_FAN_SPEED 255
/** /**
* Hotend Cooling Fans tachometers * Hotend Cooling Fans tachometers

22
config/examples/Creality/Ender-3 Neo/Configuration_adv.h
View file

@ -584,6 +584,9 @@
#define CONTROLLERFAN_SPEED_IDLE 0 // (0-255) Idle speed, used when motors are disabled #define CONTROLLERFAN_SPEED_IDLE 0 // (0-255) Idle speed, used when motors are disabled
#define CONTROLLERFAN_IDLE_TIME 60 // (seconds) Extra time to keep the fan running after disabling motors #define CONTROLLERFAN_IDLE_TIME 60 // (seconds) Extra time to keep the fan running after disabling motors
//#define CONTROLLERFAN_KICKSTART_TIME 100 // (ms)
//#define CONTROLLERFAN_KICKSTART_POWER 180 // 64-255
// Use TEMP_SENSOR_BOARD as a trigger for enabling the controller fan // Use TEMP_SENSOR_BOARD as a trigger for enabling the controller fan
//#define CONTROLLER_FAN_MIN_BOARD_TEMP 40 // (°C) Turn on the fan if the board reaches this temperature //#define CONTROLLER_FAN_MIN_BOARD_TEMP 40 // (°C) Turn on the fan if the board reaches this temperature
@ -602,8 +605,8 @@
* gets it spinning reliably for a short time before setting the requested speed. * gets it spinning reliably for a short time before setting the requested speed.
* (Does not work on Sanguinololu with FAN_SOFT_PWM.) * (Does not work on Sanguinololu with FAN_SOFT_PWM.)
*/ */
//#define FAN_KICKSTART_TIME 100 // (ms) //#define EFAN_KICKSTART_TIME 100 // (ms)
//#define FAN_KICKSTART_POWER 180 // 64-255 //#define EFAN_KICKSTART_POWER 180 // 64-255
// Some coolers may require a non-zero "off" state. // Some coolers may require a non-zero "off" state.
//#define FAN_OFF_PWM 1 //#define FAN_OFF_PWM 1
@ -692,12 +695,15 @@
#define CHAMBER_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1
#define COOLER_AUTO_FAN_PIN -1 #define COOLER_AUTO_FAN_PIN -1
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50
#define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 is full speed
#define CHAMBER_AUTO_FAN_TEMPERATURE 30 //#define EXTRUDER_AUTO_FAN_KICKSTART_TIME 100 // (ms)
#define CHAMBER_AUTO_FAN_SPEED 255 //#define EXTRUDER_AUTO_FAN_KICKSTART_POWER 180 // 64-255
#define COOLER_AUTO_FAN_TEMPERATURE 18
#define COOLER_AUTO_FAN_SPEED 255 #define CHAMBER_AUTO_FAN_TEMPERATURE 28
#define CHAMBER_AUTO_FAN_SPEED 255
#define COOLER_AUTO_FAN_TEMPERATURE 18
#define COOLER_AUTO_FAN_SPEED 255
/** /**
* Hotend Cooling Fans tachometers * Hotend Cooling Fans tachometers

22
config/examples/Creality/Ender-3 Pro/BigTreeTech SKR 1.4 Turbo/Configuration_adv.h
View file

@ -584,6 +584,9 @@
#define CONTROLLERFAN_SPEED_IDLE 0 // (0-255) Idle speed, used when motors are disabled #define CONTROLLERFAN_SPEED_IDLE 0 // (0-255) Idle speed, used when motors are disabled
#define CONTROLLERFAN_IDLE_TIME 60 // (seconds) Extra time to keep the fan running after disabling motors #define CONTROLLERFAN_IDLE_TIME 60 // (seconds) Extra time to keep the fan running after disabling motors
//#define CONTROLLERFAN_KICKSTART_TIME 100 // (ms)
//#define CONTROLLERFAN_KICKSTART_POWER 180 // 64-255
// Use TEMP_SENSOR_BOARD as a trigger for enabling the controller fan // Use TEMP_SENSOR_BOARD as a trigger for enabling the controller fan
//#define CONTROLLER_FAN_MIN_BOARD_TEMP 40 // (°C) Turn on the fan if the board reaches this temperature //#define CONTROLLER_FAN_MIN_BOARD_TEMP 40 // (°C) Turn on the fan if the board reaches this temperature
@ -602,8 +605,8 @@
* gets it spinning reliably for a short time before setting the requested speed. * gets it spinning reliably for a short time before setting the requested speed.
* (Does not work on Sanguinololu with FAN_SOFT_PWM.) * (Does not work on Sanguinololu with FAN_SOFT_PWM.)
*/ */
//#define FAN_KICKSTART_TIME 100 // (ms) //#define EFAN_KICKSTART_TIME 100 // (ms)
//#define FAN_KICKSTART_POWER 180 // 64-255 //#define EFAN_KICKSTART_POWER 180 // 64-255
// Some coolers may require a non-zero "off" state. // Some coolers may require a non-zero "off" state.
//#define FAN_OFF_PWM 1 //#define FAN_OFF_PWM 1
@ -692,12 +695,15 @@
#define CHAMBER_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1
#define COOLER_AUTO_FAN_PIN -1 #define COOLER_AUTO_FAN_PIN -1
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50
#define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 is full speed
#define CHAMBER_AUTO_FAN_TEMPERATURE 30 //#define EXTRUDER_AUTO_FAN_KICKSTART_TIME 100 // (ms)
#define CHAMBER_AUTO_FAN_SPEED 255 //#define EXTRUDER_AUTO_FAN_KICKSTART_POWER 180 // 64-255
#define COOLER_AUTO_FAN_TEMPERATURE 18
#define COOLER_AUTO_FAN_SPEED 255 #define CHAMBER_AUTO_FAN_TEMPERATURE 28
#define CHAMBER_AUTO_FAN_SPEED 255
#define COOLER_AUTO_FAN_TEMPERATURE 18
#define COOLER_AUTO_FAN_SPEED 255
/** /**
* Hotend Cooling Fans tachometers * Hotend Cooling Fans tachometers

22
config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h
View file

@ -584,6 +584,9 @@
#define CONTROLLERFAN_SPEED_IDLE 0 // (0-255) Idle speed, used when motors are disabled #define CONTROLLERFAN_SPEED_IDLE 0 // (0-255) Idle speed, used when motors are disabled
#define CONTROLLERFAN_IDLE_TIME 60 // (seconds) Extra time to keep the fan running after disabling motors #define CONTROLLERFAN_IDLE_TIME 60 // (seconds) Extra time to keep the fan running after disabling motors
//#define CONTROLLERFAN_KICKSTART_TIME 100 // (ms)
//#define CONTROLLERFAN_KICKSTART_POWER 180 // 64-255
// Use TEMP_SENSOR_BOARD as a trigger for enabling the controller fan // Use TEMP_SENSOR_BOARD as a trigger for enabling the controller fan
//#define CONTROLLER_FAN_MIN_BOARD_TEMP 40 // (°C) Turn on the fan if the board reaches this temperature //#define CONTROLLER_FAN_MIN_BOARD_TEMP 40 // (°C) Turn on the fan if the board reaches this temperature
@ -602,8 +605,8 @@
* gets it spinning reliably for a short time before setting the requested speed. * gets it spinning reliably for a short time before setting the requested speed.
* (Does not work on Sanguinololu with FAN_SOFT_PWM.) * (Does not work on Sanguinololu with FAN_SOFT_PWM.)
*/ */
//#define FAN_KICKSTART_TIME 100 // (ms) //#define EFAN_KICKSTART_TIME 100 // (ms)
//#define FAN_KICKSTART_POWER 180 // 64-255 //#define EFAN_KICKSTART_POWER 180 // 64-255
// Some coolers may require a non-zero "off" state. // Some coolers may require a non-zero "off" state.
//#define FAN_OFF_PWM 1 //#define FAN_OFF_PWM 1
@ -692,12 +695,15 @@
#define CHAMBER_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1
#define COOLER_AUTO_FAN_PIN -1 #define COOLER_AUTO_FAN_PIN -1
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50
#define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 is full speed
#define CHAMBER_AUTO_FAN_TEMPERATURE 30 //#define EXTRUDER_AUTO_FAN_KICKSTART_TIME 100 // (ms)
#define CHAMBER_AUTO_FAN_SPEED 255 //#define EXTRUDER_AUTO_FAN_KICKSTART_POWER 180 // 64-255
#define COOLER_AUTO_FAN_TEMPERATURE 18
#define COOLER_AUTO_FAN_SPEED 255 #define CHAMBER_AUTO_FAN_TEMPERATURE 28
#define CHAMBER_AUTO_FAN_SPEED 255
#define COOLER_AUTO_FAN_TEMPERATURE 18
#define COOLER_AUTO_FAN_SPEED 255
/** /**
* Hotend Cooling Fans tachometers * Hotend Cooling Fans tachometers

22
config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h
View file

@ -584,6 +584,9 @@
#define CONTROLLERFAN_SPEED_IDLE 0 // (0-255) Idle speed, used when motors are disabled #define CONTROLLERFAN_SPEED_IDLE 0 // (0-255) Idle speed, used when motors are disabled
#define CONTROLLERFAN_IDLE_TIME 60 // (seconds) Extra time to keep the fan running after disabling motors #define CONTROLLERFAN_IDLE_TIME 60 // (seconds) Extra time to keep the fan running after disabling motors
//#define CONTROLLERFAN_KICKSTART_TIME 100 // (ms)
//#define CONTROLLERFAN_KICKSTART_POWER 180 // 64-255
// Use TEMP_SENSOR_BOARD as a trigger for enabling the controller fan // Use TEMP_SENSOR_BOARD as a trigger for enabling the controller fan
//#define CONTROLLER_FAN_MIN_BOARD_TEMP 40 // (°C) Turn on the fan if the board reaches this temperature //#define CONTROLLER_FAN_MIN_BOARD_TEMP 40 // (°C) Turn on the fan if the board reaches this temperature
@ -602,8 +605,8 @@
* gets it spinning reliably for a short time before setting the requested speed. * gets it spinning reliably for a short time before setting the requested speed.
* (Does not work on Sanguinololu with FAN_SOFT_PWM.) * (Does not work on Sanguinololu with FAN_SOFT_PWM.)
*/ */
//#define FAN_KICKSTART_TIME 100 // (ms) //#define EFAN_KICKSTART_TIME 100 // (ms)
//#define FAN_KICKSTART_POWER 180 // 64-255 //#define EFAN_KICKSTART_POWER 180 // 64-255
// Some coolers may require a non-zero "off" state. // Some coolers may require a non-zero "off" state.
//#define FAN_OFF_PWM 1 //#define FAN_OFF_PWM 1
@ -692,12 +695,15 @@
#define CHAMBER_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1
#define COOLER_AUTO_FAN_PIN -1 #define COOLER_AUTO_FAN_PIN -1
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50
#define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 is full speed
#define CHAMBER_AUTO_FAN_TEMPERATURE 30 //#define EXTRUDER_AUTO_FAN_KICKSTART_TIME 100 // (ms)
#define CHAMBER_AUTO_FAN_SPEED 255 //#define EXTRUDER_AUTO_FAN_KICKSTART_POWER 180 // 64-255
#define COOLER_AUTO_FAN_TEMPERATURE 18
#define COOLER_AUTO_FAN_SPEED 255 #define CHAMBER_AUTO_FAN_TEMPERATURE 28
#define CHAMBER_AUTO_FAN_SPEED 255
#define COOLER_AUTO_FAN_TEMPERATURE 18
#define COOLER_AUTO_FAN_SPEED 255
/** /**
* Hotend Cooling Fans tachometers * Hotend Cooling Fans tachometers

22
config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h
View file

@ -584,6 +584,9 @@
#define CONTROLLERFAN_SPEED_IDLE 0 // (0-255) Idle speed, used when motors are disabled #define CONTROLLERFAN_SPEED_IDLE 0 // (0-255) Idle speed, used when motors are disabled
#define CONTROLLERFAN_IDLE_TIME 60 // (seconds) Extra time to keep the fan running after disabling motors #define CONTROLLERFAN_IDLE_TIME 60 // (seconds) Extra time to keep the fan running after disabling motors
//#define CONTROLLERFAN_KICKSTART_TIME 100 // (ms)
//#define CONTROLLERFAN_KICKSTART_POWER 180 // 64-255
// Use TEMP_SENSOR_BOARD as a trigger for enabling the controller fan // Use TEMP_SENSOR_BOARD as a trigger for enabling the controller fan
//#define CONTROLLER_FAN_MIN_BOARD_TEMP 40 // (°C) Turn on the fan if the board reaches this temperature //#define CONTROLLER_FAN_MIN_BOARD_TEMP 40 // (°C) Turn on the fan if the board reaches this temperature
@ -602,8 +605,8 @@
* gets it spinning reliably for a short time before setting the requested speed. * gets it spinning reliably for a short time before setting the requested speed.
* (Does not work on Sanguinololu with FAN_SOFT_PWM.) * (Does not work on Sanguinololu with FAN_SOFT_PWM.)
*/ */
//#define FAN_KICKSTART_TIME 100 // (ms) //#define EFAN_KICKSTART_TIME 100 // (ms)
//#define FAN_KICKSTART_POWER 180 // 64-255 //#define EFAN_KICKSTART_POWER 180 // 64-255
// Some coolers may require a non-zero "off" state. // Some coolers may require a non-zero "off" state.
//#define FAN_OFF_PWM 1 //#define FAN_OFF_PWM 1
@ -692,12 +695,15 @@
#define CHAMBER_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1
#define COOLER_AUTO_FAN_PIN -1 #define COOLER_AUTO_FAN_PIN -1
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50
#define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 is full speed
#define CHAMBER_AUTO_FAN_TEMPERATURE 30 //#define EXTRUDER_AUTO_FAN_KICKSTART_TIME 100 // (ms)
#define CHAMBER_AUTO_FAN_SPEED 255 //#define EXTRUDER_AUTO_FAN_KICKSTART_POWER 180 // 64-255
#define COOLER_AUTO_FAN_TEMPERATURE 18
#define COOLER_AUTO_FAN_SPEED 255 #define CHAMBER_AUTO_FAN_TEMPERATURE 28
#define CHAMBER_AUTO_FAN_SPEED 255
#define COOLER_AUTO_FAN_TEMPERATURE 18
#define COOLER_AUTO_FAN_SPEED 255
/** /**
* Hotend Cooling Fans tachometers * Hotend Cooling Fans tachometers

22
config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h
View file

@ -584,6 +584,9 @@
#define CONTROLLERFAN_SPEED_IDLE 0 // (0-255) Idle speed, used when motors are disabled #define CONTROLLERFAN_SPEED_IDLE 0 // (0-255) Idle speed, used when motors are disabled
#define CONTROLLERFAN_IDLE_TIME 60 // (seconds) Extra time to keep the fan running after disabling motors #define CONTROLLERFAN_IDLE_TIME 60 // (seconds) Extra time to keep the fan running after disabling motors
//#define CONTROLLERFAN_KICKSTART_TIME 100 // (ms)
//#define CONTROLLERFAN_KICKSTART_POWER 180 // 64-255
// Use TEMP_SENSOR_BOARD as a trigger for enabling the controller fan // Use TEMP_SENSOR_BOARD as a trigger for enabling the controller fan
//#define CONTROLLER_FAN_MIN_BOARD_TEMP 40 // (°C) Turn on the fan if the board reaches this temperature //#define CONTROLLER_FAN_MIN_BOARD_TEMP 40 // (°C) Turn on the fan if the board reaches this temperature
@ -602,8 +605,8 @@
* gets it spinning reliably for a short time before setting the requested speed. * gets it spinning reliably for a short time before setting the requested speed.
* (Does not work on Sanguinololu with FAN_SOFT_PWM.) * (Does not work on Sanguinololu with FAN_SOFT_PWM.)
*/ */
//#define FAN_KICKSTART_TIME 100 // (ms) //#define EFAN_KICKSTART_TIME 100 // (ms)
//#define FAN_KICKSTART_POWER 180 // 64-255 //#define EFAN_KICKSTART_POWER 180 // 64-255
// Some coolers may require a non-zero "off" state. // Some coolers may require a non-zero "off" state.
//#define FAN_OFF_PWM 1 //#define FAN_OFF_PWM 1
@ -692,12 +695,15 @@
#define CHAMBER_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1
#define COOLER_AUTO_FAN_PIN -1 #define COOLER_AUTO_FAN_PIN -1
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50
#define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 is full speed
#define CHAMBER_AUTO_FAN_TEMPERATURE 30 //#define EXTRUDER_AUTO_FAN_KICKSTART_TIME 100 // (ms)
#define CHAMBER_AUTO_FAN_SPEED 255 //#define EXTRUDER_AUTO_FAN_KICKSTART_POWER 180 // 64-255
#define COOLER_AUTO_FAN_TEMPERATURE 18
#define COOLER_AUTO_FAN_SPEED 255 #define CHAMBER_AUTO_FAN_TEMPERATURE 28
#define CHAMBER_AUTO_FAN_SPEED 255
#define COOLER_AUTO_FAN_TEMPERATURE 18
#define COOLER_AUTO_FAN_SPEED 255
/** /**
* Hotend Cooling Fans tachometers * Hotend Cooling Fans tachometers

22
config/examples/Creality/Ender-3 Pro/CrealityV1/Configuration_adv.h
View file

@ -584,6 +584,9 @@
#define CONTROLLERFAN_SPEED_IDLE 0 // (0-255) Idle speed, used when motors are disabled #define CONTROLLERFAN_SPEED_IDLE 0 // (0-255) Idle speed, used when motors are disabled
#define CONTROLLERFAN_IDLE_TIME 60 // (seconds) Extra time to keep the fan running after disabling motors #define CONTROLLERFAN_IDLE_TIME 60 // (seconds) Extra time to keep the fan running after disabling motors
//#define CONTROLLERFAN_KICKSTART_TIME 100 // (ms)
//#define CONTROLLERFAN_KICKSTART_POWER 180 // 64-255
// Use TEMP_SENSOR_BOARD as a trigger for enabling the controller fan // Use TEMP_SENSOR_BOARD as a trigger for enabling the controller fan
//#define CONTROLLER_FAN_MIN_BOARD_TEMP 40 // (°C) Turn on the fan if the board reaches this temperature //#define CONTROLLER_FAN_MIN_BOARD_TEMP 40 // (°C) Turn on the fan if the board reaches this temperature
@ -602,8 +605,8 @@
* gets it spinning reliably for a short time before setting the requested speed. * gets it spinning reliably for a short time before setting the requested speed.
* (Does not work on Sanguinololu with FAN_SOFT_PWM.) * (Does not work on Sanguinololu with FAN_SOFT_PWM.)
*/ */
//#define FAN_KICKSTART_TIME 100 // (ms) //#define EFAN_KICKSTART_TIME 100 // (ms)
//#define FAN_KICKSTART_POWER 180 // 64-255 //#define EFAN_KICKSTART_POWER 180 // 64-255
// Some coolers may require a non-zero "off" state. // Some coolers may require a non-zero "off" state.
//#define FAN_OFF_PWM 1 //#define FAN_OFF_PWM 1
@ -692,12 +695,15 @@
#define CHAMBER_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1
#define COOLER_AUTO_FAN_PIN -1 #define COOLER_AUTO_FAN_PIN -1
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50
#define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 is full speed
#define CHAMBER_AUTO_FAN_TEMPERATURE 30 //#define EXTRUDER_AUTO_FAN_KICKSTART_TIME 100 // (ms)
#define CHAMBER_AUTO_FAN_SPEED 255 //#define EXTRUDER_AUTO_FAN_KICKSTART_POWER 180 // 64-255
#define COOLER_AUTO_FAN_TEMPERATURE 18
#define COOLER_AUTO_FAN_SPEED 255 #define CHAMBER_AUTO_FAN_TEMPERATURE 28
#define CHAMBER_AUTO_FAN_SPEED 255
#define COOLER_AUTO_FAN_TEMPERATURE 18
#define COOLER_AUTO_FAN_SPEED 255
/** /**
* Hotend Cooling Fans tachometers * Hotend Cooling Fans tachometers

22
config/examples/Creality/Ender-3 Pro/CrealityV422/Configuration_adv.h
View file

@ -584,6 +584,9 @@
#define CONTROLLERFAN_SPEED_IDLE 0 // (0-255) Idle speed, used when motors are disabled #define CONTROLLERFAN_SPEED_IDLE 0 // (0-255) Idle speed, used when motors are disabled
#define CONTROLLERFAN_IDLE_TIME 60 // (seconds) Extra time to keep the fan running after disabling motors #define CONTROLLERFAN_IDLE_TIME 60 // (seconds) Extra time to keep the fan running after disabling motors
//#define CONTROLLERFAN_KICKSTART_TIME 100 // (ms)
//#define CONTROLLERFAN_KICKSTART_POWER 180 // 64-255
// Use TEMP_SENSOR_BOARD as a trigger for enabling the controller fan // Use TEMP_SENSOR_BOARD as a trigger for enabling the controller fan
//#define CONTROLLER_FAN_MIN_BOARD_TEMP 40 // (°C) Turn on the fan if the board reaches this temperature //#define CONTROLLER_FAN_MIN_BOARD_TEMP 40 // (°C) Turn on the fan if the board reaches this temperature
@ -602,8 +605,8 @@
* gets it spinning reliably for a short time before setting the requested speed. * gets it spinning reliably for a short time before setting the requested speed.
* (Does not work on Sanguinololu with FAN_SOFT_PWM.) * (Does not work on Sanguinololu with FAN_SOFT_PWM.)
*/ */
//#define FAN_KICKSTART_TIME 100 // (ms) //#define EFAN_KICKSTART_TIME 100 // (ms)
//#define FAN_KICKSTART_POWER 180 // 64-255 //#define EFAN_KICKSTART_POWER 180 // 64-255
// Some coolers may require a non-zero "off" state. // Some coolers may require a non-zero "off" state.
//#define FAN_OFF_PWM 1 //#define FAN_OFF_PWM 1
@ -692,12 +695,15 @@
#define CHAMBER_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1
#define COOLER_AUTO_FAN_PIN -1 #define COOLER_AUTO_FAN_PIN -1
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50
#define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 is full speed
#define CHAMBER_AUTO_FAN_TEMPERATURE 30 //#define EXTRUDER_AUTO_FAN_KICKSTART_TIME 100 // (ms)
#define CHAMBER_AUTO_FAN_SPEED 255 //#define EXTRUDER_AUTO_FAN_KICKSTART_POWER 180 // 64-255
#define COOLER_AUTO_FAN_TEMPERATURE 18
#define COOLER_AUTO_FAN_SPEED 255 #define CHAMBER_AUTO_FAN_TEMPERATURE 28
#define CHAMBER_AUTO_FAN_SPEED 255
#define COOLER_AUTO_FAN_TEMPERATURE 18
#define COOLER_AUTO_FAN_SPEED 255
/** /**
* Hotend Cooling Fans tachometers * Hotend Cooling Fans tachometers

22
config/examples/Creality/Ender-3 Pro/CrealityV427/Configuration_adv.h
View file

@ -584,6 +584,9 @@
#define CONTROLLERFAN_SPEED_IDLE 0 // (0-255) Idle speed, used when motors are disabled #define CONTROLLERFAN_SPEED_IDLE 0 // (0-255) Idle speed, used when motors are disabled
#define CONTROLLERFAN_IDLE_TIME 60 // (seconds) Extra time to keep the fan running after disabling motors #define CONTROLLERFAN_IDLE_TIME 60 // (seconds) Extra time to keep the fan running after disabling motors
//#define CONTROLLERFAN_KICKSTART_TIME 100 // (ms)
//#define CONTROLLERFAN_KICKSTART_POWER 180 // 64-255
// Use TEMP_SENSOR_BOARD as a trigger for enabling the controller fan // Use TEMP_SENSOR_BOARD as a trigger for enabling the controller fan
//#define CONTROLLER_FAN_MIN_BOARD_TEMP 40 // (°C) Turn on the fan if the board reaches this temperature //#define CONTROLLER_FAN_MIN_BOARD_TEMP 40 // (°C) Turn on the fan if the board reaches this temperature
@ -602,8 +605,8 @@
* gets it spinning reliably for a short time before setting the requested speed. * gets it spinning reliably for a short time before setting the requested speed.
* (Does not work on Sanguinololu with FAN_SOFT_PWM.) * (Does not work on Sanguinololu with FAN_SOFT_PWM.)
*/ */
//#define FAN_KICKSTART_TIME 100 // (ms) //#define EFAN_KICKSTART_TIME 100 // (ms)
//#define FAN_KICKSTART_POWER 180 // 64-255 //#define EFAN_KICKSTART_POWER 180 // 64-255
// Some coolers may require a non-zero "off" state. // Some coolers may require a non-zero "off" state.
//#define FAN_OFF_PWM 1 //#define FAN_OFF_PWM 1
@ -692,12 +695,15 @@
#define CHAMBER_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1
#define COOLER_AUTO_FAN_PIN -1 #define COOLER_AUTO_FAN_PIN -1
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50
#define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 is full speed
#define CHAMBER_AUTO_FAN_TEMPERATURE 30 //#define EXTRUDER_AUTO_FAN_KICKSTART_TIME 100 // (ms)
#define CHAMBER_AUTO_FAN_SPEED 255 //#define EXTRUDER_AUTO_FAN_KICKSTART_POWER 180 // 64-255
#define COOLER_AUTO_FAN_TEMPERATURE 18
#define COOLER_AUTO_FAN_SPEED 255 #define CHAMBER_AUTO_FAN_TEMPERATURE 28
#define CHAMBER_AUTO_FAN_SPEED 255
#define COOLER_AUTO_FAN_TEMPERATURE 18
#define COOLER_AUTO_FAN_SPEED 255
/** /**
* Hotend Cooling Fans tachometers * Hotend Cooling Fans tachometers

22
config/examples/Creality/Ender-3 S1 Plus/Configuration_adv.h
View file

@ -584,6 +584,9 @@
#define CONTROLLERFAN_SPEED_IDLE 0 // (0-255) Idle speed, used when motors are disabled #define CONTROLLERFAN_SPEED_IDLE 0 // (0-255) Idle speed, used when motors are disabled
#define CONTROLLERFAN_IDLE_TIME 60 // (seconds) Extra time to keep the fan running after disabling motors #define CONTROLLERFAN_IDLE_TIME 60 // (seconds) Extra time to keep the fan running after disabling motors
//#define CONTROLLERFAN_KICKSTART_TIME 100 // (ms)
//#define CONTROLLERFAN_KICKSTART_POWER 180 // 64-255
// Use TEMP_SENSOR_BOARD as a trigger for enabling the controller fan // Use TEMP_SENSOR_BOARD as a trigger for enabling the controller fan
//#define CONTROLLER_FAN_MIN_BOARD_TEMP 40 // (°C) Turn on the fan if the board reaches this temperature //#define CONTROLLER_FAN_MIN_BOARD_TEMP 40 // (°C) Turn on the fan if the board reaches this temperature
@ -602,8 +605,8 @@
* gets it spinning reliably for a short time before setting the requested speed. * gets it spinning reliably for a short time before setting the requested speed.
* (Does not work on Sanguinololu with FAN_SOFT_PWM.) * (Does not work on Sanguinololu with FAN_SOFT_PWM.)
*/ */
#define FAN_KICKSTART_TIME 200 // (ms) #define EFAN_KICKSTART_TIME 200 // (ms)
//#define FAN_KICKSTART_POWER 180 // 64-255 //#define EFAN_KICKSTART_POWER 180 // 64-255
// Some coolers may require a non-zero "off" state. // Some coolers may require a non-zero "off" state.
//#define FAN_OFF_PWM 1 //#define FAN_OFF_PWM 1
@ -692,12 +695,15 @@
#define CHAMBER_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1
#define COOLER_AUTO_FAN_PIN -1 #define COOLER_AUTO_FAN_PIN -1
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50
#define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 is full speed
#define CHAMBER_AUTO_FAN_TEMPERATURE 30 //#define EXTRUDER_AUTO_FAN_KICKSTART_TIME 100 // (ms)
#define CHAMBER_AUTO_FAN_SPEED 255 //#define EXTRUDER_AUTO_FAN_KICKSTART_POWER 180 // 64-255
#define COOLER_AUTO_FAN_TEMPERATURE 18
#define COOLER_AUTO_FAN_SPEED 255 #define CHAMBER_AUTO_FAN_TEMPERATURE 28
#define CHAMBER_AUTO_FAN_SPEED 255
#define COOLER_AUTO_FAN_TEMPERATURE 18
#define COOLER_AUTO_FAN_SPEED 255
/** /**
* Hotend Cooling Fans tachometers * Hotend Cooling Fans tachometers

Some files were not shown because too many files have changed in this diff Show more