From 14179c0cf48edf8d247fb5ab5075796e7f9aa172 Mon Sep 17 00:00:00 2001 From: Scott Lahteine Date: Sat, 15 May 2021 15:25:11 -0500 Subject: [PATCH] Examples Customizations --- .../examples/3DFabXYZ/Migbot/Configuration.h | 172 ++++++---- .../3DFabXYZ/Migbot/Configuration_adv.h | 70 ++--- .../ADIMLab/Gantry v1/Configuration.h | 83 ++--- .../ADIMLab/Gantry v1/Configuration_adv.h | 36 ++- .../ADIMLab/Gantry v2/Configuration.h | 61 ++-- .../ADIMLab/Gantry v2/Configuration_adv.h | 12 +- .../AlephObjects/TAZ4/Configuration.h | 151 +++++---- .../AlephObjects/TAZ4/Configuration_adv.h | 26 +- .../Alfawise/U20-bltouch/Configuration.h | 284 +++++++++++------ .../Alfawise/U20-bltouch/Configuration_adv.h | 99 +++--- config/examples/Alfawise/U20/Configuration.h | 260 ++++++++++----- .../examples/Alfawise/U20/Configuration_adv.h | 69 ++-- .../AliExpress/CL-260/Configuration.h | 42 +-- .../AliExpress/UM2pExt/Configuration.h | 115 +++---- .../AliExpress/UM2pExt/Configuration_adv.h | 50 +-- config/examples/Anet/A2/Configuration.h | 62 ++-- config/examples/Anet/A2/Configuration_adv.h | 6 +- config/examples/Anet/A2plus/Configuration.h | 62 ++-- .../examples/Anet/A2plus/Configuration_adv.h | 6 +- config/examples/Anet/A6/Configuration.h | 217 +++++++++---- config/examples/Anet/A6/Configuration_adv.h | 26 +- config/examples/Anet/A8/Configuration.h | 113 +++---- config/examples/Anet/A8/Configuration_adv.h | 34 +- config/examples/Anet/A8plus/Configuration.h | 117 +++---- .../examples/Anet/A8plus/Configuration_adv.h | 16 +- config/examples/Anet/A9/Configuration.h | 84 ++--- config/examples/Anet/A9/Configuration_adv.h | 6 +- config/examples/Anet/E10/Configuration.h | 117 +++---- config/examples/Anet/E10/Configuration_adv.h | 68 ++-- .../Anet/E16/BTT SKR 1.3/Configuration.h | 92 +++--- .../Anet/E16/BTT SKR 1.3/Configuration_adv.h | 6 +- .../examples/Anet/E16/Stock/Configuration.h | 98 +++--- .../Anet/E16/Stock/Configuration_adv.h | 60 ++-- config/examples/Anet/ET4+/Configuration.h | 207 +++++++----- config/examples/Anet/ET4+/Configuration_adv.h | 52 +-- config/examples/Anet/ET4-Pro/Configuration.h | 215 ++++++++----- .../examples/Anet/ET4-Pro/Configuration_adv.h | 52 +-- config/examples/Anet/ET4/Configuration.h | 207 +++++++----- config/examples/Anet/ET4/Configuration_adv.h | 52 +-- config/examples/Anet/ET4X/Configuration.h | 211 ++++++++----- config/examples/Anet/ET4X/Configuration_adv.h | 52 +-- config/examples/Anet/ET5-Pro/Configuration.h | 200 +++++++----- .../examples/Anet/ET5-Pro/Configuration_adv.h | 93 +++--- config/examples/Anet/ET5/Configuration.h | 192 ++++++----- config/examples/Anet/ET5/Configuration_adv.h | 93 +++--- config/examples/Anet/ET5X/Configuration.h | 192 ++++++----- config/examples/Anet/ET5X/Configuration_adv.h | 93 +++--- .../examples/AnyCubic/Chiron/Configuration.h | 123 ++++---- .../AnyCubic/Chiron/Configuration_adv.h | 112 +++---- .../Mega Zero 2.0/Anycubic V1/Configuration.h | 118 +++---- .../Anycubic V1/Configuration_adv.h | 36 ++- .../Mega Zero/Anycubic V1/Configuration.h | 106 ++++--- .../Mega Zero/Anycubic V1/Configuration_adv.h | 34 +- .../Configuration.h | 116 +++---- .../Configuration_adv.h | 38 +-- .../examples/AnyCubic/i3 Mega/Configuration.h | 194 +++++++----- .../AnyCubic/i3 Mega/Configuration_adv.h | 42 +-- config/examples/AnyCubic/i3/Configuration.h | 118 +++---- .../examples/AnyCubic/i3/Configuration_adv.h | 10 +- config/examples/ArmEd/Configuration.h | 53 ++-- config/examples/ArmEd/Configuration_adv.h | 8 +- .../examples/Artillery/Genius/Configuration.h | 106 ++++--- .../Artillery/Genius/Configuration_adv.h | 18 +- .../Artillery/Sidewinder X1/Configuration.h | 102 +++--- .../Sidewinder X1/Configuration_adv.h | 18 +- .../Configuration.h | 130 ++++---- .../Configuration_adv.h | 24 +- config/examples/Azteeg/X5GT/Configuration.h | 40 +-- .../examples/Azteeg/X5GT/Configuration_adv.h | 2 + .../BIBO/TouchX/cyclops/Configuration.h | 130 ++++---- .../BIBO/TouchX/cyclops/Configuration_adv.h | 18 +- .../BIBO/TouchX/default/Configuration.h | 180 ++++------- .../BIBO/TouchX/default/Configuration_adv.h | 21 +- .../examples/BIQU/B1-BLTouch/Configuration.h | 166 +++++----- .../BIQU/B1-BLTouch/Configuration_adv.h | 120 +++---- config/examples/BIQU/B1/Configuration.h | 154 ++++----- config/examples/BIQU/B1/Configuration_adv.h | 112 +++---- config/examples/BQ/Hephestos/Configuration.h | 105 ++++--- .../examples/BQ/Hephestos/Configuration_adv.h | 16 +- .../examples/BQ/Hephestos_2/Configuration.h | 148 +++++---- .../BQ/Hephestos_2/Configuration_adv.h | 84 ++--- config/examples/BQ/WITBOX/Configuration.h | 97 +++--- config/examples/BQ/WITBOX/Configuration_adv.h | 16 +- .../i3 2560 Rev A/no probe/Configuration.h | 61 ++-- config/examples/Cartesio/Configuration.h | 152 +++++---- config/examples/Cartesio/Configuration_adv.h | 16 +- .../examples/Copymaster3D/300/Configuration.h | 81 ++--- .../examples/Copymaster3D/400/Configuration.h | 66 ++-- .../examples/Copymaster3D/500/Configuration.h | 81 ++--- .../Configuration.h | 139 ++++---- .../Configuration_adv.h | 82 ++--- .../CR-10 Mini/CrealityV1/Configuration.h | 97 +++--- .../CR-10 Mini/CrealityV1/Configuration_adv.h | 40 +-- .../CR-10 Mini/MEEB-3DP/Configuration.h | 126 ++++---- .../CR-10 Mini/MEEB-3DP/Configuration_adv.h | 189 ++++++----- .../CR-10 S4/CrealityV1/Configuration.h | 105 ++++--- .../CR-10 S4/CrealityV1/Configuration_adv.h | 74 ++--- .../CR-10 S5/CrealityV1/Configuration.h | 93 +++--- .../CR-10 S5/CrealityV1/Configuration_adv.h | 74 ++--- .../Creality/CR-10 V2/Configuration.h | 210 +++++++------ .../Creality/CR-10 V2/Configuration_adv.h | 171 +++++----- .../Creality/CR-10 V3/Configuration.h | 215 +++++++------ .../Creality/CR-10 V3/Configuration_adv.h | 158 +++++----- .../Configuration.h | 115 ++++--- .../Configuration_adv.h | 90 +++--- .../Creality/CR-10/CrealityV1/Configuration.h | 92 +++--- .../CR-10/CrealityV1/Configuration_adv.h | 61 ++-- .../Configuration.h | 144 +++++---- .../Configuration_adv.h | 86 ++--- .../Configuration.h | 113 ++++--- .../Configuration_adv.h | 90 +++--- .../BigTreeTech SKR Pro v1.2/Configuration.h | 118 +++---- .../Configuration_adv.h | 32 +- .../CR-10S/CrealityV1/Configuration.h | 97 +++--- .../CR-10S/CrealityV1/Configuration_adv.h | 70 +++-- .../Creality/CR-20 Pro/Configuration.h | 94 +++--- .../Creality/CR-20 Pro/Configuration_adv.h | 18 +- .../examples/Creality/CR-20/Configuration.h | 80 ++--- .../Creality/CR-20/Configuration_adv.h | 16 +- .../examples/Creality/CR-6 SE/Configuration.h | 167 +++++----- .../Creality/CR-6 SE/Configuration_adv.h | 59 ++-- config/examples/Creality/CR-8/Configuration.h | 92 +++--- .../Creality/CR-8/Configuration_adv.h | 26 +- .../examples/Creality/Ender-2/Configuration.h | 71 +++-- .../Creality/Ender-2/Configuration_adv.h | 10 +- .../Creality/Ender-3 Max/Configuration.h | 194 +++++++----- .../Creality/Ender-3 Max/Configuration_adv.h | 81 ++--- .../BigTreeTech SKR 1.4 Turbo/Configuration.h | 108 +++---- .../Configuration_adv.h | 98 +++--- .../Configuration.h | 118 +++---- .../Configuration_adv.h | 68 ++-- .../Configuration.h | 114 +++---- .../Configuration_adv.h | 60 ++-- .../Configuration.h | 110 +++---- .../Configuration_adv.h | 86 ++--- .../Ender-3 Pro/CrealityV1/Configuration.h | 81 ++--- .../CrealityV1/Configuration_adv.h | 28 +- .../Ender-3 Pro/CrealityV422/Configuration.h | 129 ++++---- .../CrealityV422/Configuration_adv.h | 39 +-- .../Ender-3 Pro/CrealityV427/Configuration.h | 94 +++--- .../CrealityV427/Configuration_adv.h | 26 +- .../Creality/Ender-3 V2/Configuration.h | 128 ++++---- .../Creality/Ender-3 V2/Configuration_adv.h | 35 ++- .../BigTreeTech E3 RRF/Configuration.h | 127 ++++---- .../BigTreeTech E3 RRF/Configuration_adv.h | 104 +++--- .../2-into-1 Hotend/Configuration.h | 117 +++---- .../2-into-1 Hotend/Configuration_adv.h | 76 ++--- .../Dual Z/Configuration.h | 113 +++---- .../Dual Z/Configuration_adv.h | 82 ++--- .../Single Extruder/Configuration.h | 111 +++---- .../Single Extruder/Configuration_adv.h | 76 ++--- .../Configuration.h | 102 +++--- .../Configuration_adv.h | 72 ++--- .../Configuration.h | 117 +++---- .../Configuration_adv.h | 66 ++-- .../Configuration.h | 113 +++---- .../Configuration_adv.h | 58 ++-- .../Configuration.h | 109 +++---- .../Configuration_adv.h | 84 ++--- .../Ender-3/CrealityV1/Configuration.h | 81 ++--- .../Ender-3/CrealityV1/Configuration_adv.h | 30 +- .../Ender-3/CrealityV422/Configuration.h | 176 ++++------- .../Ender-3/CrealityV422/Configuration_adv.h | 30 +- .../Ender-3/CrealityV427/Configuration.h | 104 +++--- .../Ender-3/CrealityV427/Configuration_adv.h | 28 +- .../BLTouch/Configuration.h | 73 ++--- .../BLTouch/Configuration_adv.h | 36 ++- .../FYSETC Cheetah 1.2/base/Configuration.h | 63 ++-- .../base/Configuration_adv.h | 36 ++- .../FYSETC Cheetah/BLTouch/Configuration.h | 75 ++--- .../BLTouch/Configuration_adv.h | 36 ++- .../FYSETC Cheetah/base/Configuration.h | 65 ++-- .../FYSETC Cheetah/base/Configuration_adv.h | 36 ++- .../Creality/Ender-3/MEEB-3DP/Configuration.h | 130 ++++---- .../Ender-3/MEEB-3DP/Configuration_adv.h | 193 ++++++------ .../Ender-3/MKS Robin E3/V1.0/Configuration.h | 121 +++---- .../MKS Robin E3/V1.0/Configuration_adv.h | 72 ++--- .../Ender-3/MKS Robin E3/V1.1/Configuration.h | 123 ++++---- .../MKS Robin E3/V1.1/Configuration_adv.h | 74 ++--- .../Ender-3/MKS Robin E3P/Configuration.h | 97 +++--- .../Ender-3/MKS Robin E3P/Configuration_adv.h | 8 +- .../examples/Creality/Ender-4/Configuration.h | 112 +++---- .../Creality/Ender-4/Configuration_adv.h | 64 ++-- .../Creality/Ender-5 Plus/Configuration.h | 160 +++++----- .../Creality/Ender-5 Plus/Configuration_adv.h | 46 +-- .../Configuration.h | 117 +++---- .../Configuration_adv.h | 32 +- .../BigTreeTech SKR E3 Turbo/Configuration.h | 109 +++---- .../Configuration_adv.h | 28 +- .../Configuration.h | 177 +++++------ .../Configuration_adv.h | 86 ++--- .../Configuration.h | 180 ++++++----- .../Configuration_adv.h | 104 +++--- .../Ender-5 Pro/CrealityV1/Configuration.h | 105 ++++--- .../CrealityV1/Configuration_adv.h | 32 +- .../Ender-5 Pro/CrealityV422/Configuration.h | 106 ++++--- .../CrealityV422/Configuration_adv.h | 34 +- .../Ender-5 Pro/CrealityV427/Configuration.h | 106 ++++--- .../CrealityV427/Configuration_adv.h | 32 +- .../Configuration.h | 158 ++++++---- .../Configuration_adv.h | 58 ++-- .../Configuration.h | 117 +++---- .../Configuration_adv.h | 32 +- .../BigTreeTech SKR E3 Turbo/Configuration.h | 109 +++---- .../Configuration_adv.h | 28 +- .../Configuration.h | 143 ++++----- .../Configuration_adv.h | 58 ++-- .../Configuration.h | 143 ++++----- .../Configuration_adv.h | 84 ++--- .../Ender-5/CrealityV1/Configuration.h | 97 +++--- .../Ender-5/CrealityV1/Configuration_adv.h | 30 +- .../Ender-5/CrealityV427/Configuration.h | 106 ++++--- .../Ender-5/CrealityV427/Configuration_adv.h | 30 +- .../examples/Creality/Ender-6/Configuration.h | 133 ++++---- .../Creality/Ender-6/Configuration_adv.h | 44 +-- .../Dagoma/Disco Ultimate/Configuration.h | 132 ++++---- .../Dagoma/Disco Ultimate/Configuration_adv.h | 78 ++--- .../examples/Daycom/3DP-100/Configuration.h | 67 ++-- .../Daycom/3DP-100/Configuration_adv.h | 8 +- .../Imprimante multifonction/Configuration.h | 236 +++++++------- .../Configuration_adv.h | 199 ++++++------ config/examples/Einstart-S/Configuration.h | 89 +++--- .../examples/Einstart-S/Configuration_adv.h | 8 +- .../Eryone/Thinker SE/Configuration.h | 160 ++++++---- .../Eryone/Thinker SE/Configuration_adv.h | 76 +++-- .../Eryone/Thinker V2/Configuration.h | 127 ++++---- .../Eryone/Thinker V2/Configuration_adv.h | 64 ++-- config/examples/FYSETC/AIO_II/Configuration.h | 65 ++-- .../FYSETC/AIO_II/Configuration_adv.h | 30 +- config/examples/FYSETC/F6_13/Configuration.h | 40 ++- .../examples/FYSETC/F6_13/Configuration_adv.h | 20 +- config/examples/FYSETC/S6/Configuration.h | 14 +- config/examples/FYSETC/S6/Configuration_adv.h | 4 +- config/examples/Felix/DUAL/Configuration.h | 91 +++--- .../examples/Felix/DUAL/Configuration_adv.h | 16 +- config/examples/Felix/Single/Configuration.h | 83 ++--- .../examples/Felix/Single/Configuration_adv.h | 16 +- .../FlashForge/Creator 2X/Configuration.h | 126 ++++---- .../FlashForge/Creator 2X/Configuration_adv.h | 46 +-- .../FlashForge/CreatorPro/Configuration.h | 140 +++++---- .../FlashForge/CreatorPro/Configuration_adv.h | 45 +-- .../examples/FlyingBear/P905H/Configuration.h | 101 +++--- .../FlyingBear/P905H/Configuration_adv.h | 11 +- .../FolgerTech/i3-2020/Configuration.h | 156 ++++----- .../FolgerTech/i3-2020/Configuration_adv.h | 72 +++-- .../examples/Formbot/Raptor/Configuration.h | 277 +++++++++++----- .../Formbot/Raptor/Configuration_adv.h | 129 ++++---- .../examples/Formbot/T_Rex_2+/Configuration.h | 210 +++++++------ .../Formbot/T_Rex_2+/Configuration_adv.h | 136 ++++---- .../examples/Formbot/T_Rex_3/Configuration.h | 170 +++++----- .../Formbot/T_Rex_3/Configuration_adv.h | 206 ++++++------ config/examples/Geeetech/A10/Configuration.h | 168 +++++----- .../examples/Geeetech/A10/Configuration_adv.h | 22 +- config/examples/Geeetech/A10D/Configuration.h | 164 +++++----- .../Geeetech/A10D/Configuration_adv.h | 26 +- .../Geeetech/A10M/Configuration_adv.h | 70 +++-- .../Geeetech/A10M/Stock LCD/Configuration.h | 150 ++++----- .../A10M/YHCB2004_V4.1/Configuration.h | 150 ++++----- .../examples/Geeetech/A10PRO/Configuration.h | 168 +++++----- .../Geeetech/A10PRO/Configuration_adv.h | 22 +- .../Geeetech/A10T/Configuration_adv.h | 70 +++-- .../Geeetech/A10T/Stock LCD/Configuration.h | 151 ++++----- .../A10T/YHCB2004_V4.1/Configuration.h | 151 ++++----- config/examples/Geeetech/A20/Configuration.h | 156 ++++----- .../examples/Geeetech/A20/Configuration_adv.h | 82 ++--- config/examples/Geeetech/A20M/Configuration.h | 161 +++++----- .../Geeetech/A20M/Configuration_adv.h | 82 ++--- config/examples/Geeetech/A20T/Configuration.h | 162 +++++----- .../Geeetech/A20T/Configuration_adv.h | 82 ++--- config/examples/Geeetech/A30/Configuration.h | 175 ++++++----- .../examples/Geeetech/A30/Configuration_adv.h | 81 ++--- config/examples/Geeetech/A30M/Configuration.h | 177 ++++++----- .../Geeetech/A30M/Configuration_adv.h | 81 ++--- config/examples/Geeetech/A30T/Configuration.h | 179 ++++++----- .../Geeetech/A30T/Configuration_adv.h | 81 ++--- config/examples/Geeetech/D200/Configuration.h | 169 +++++----- .../Geeetech/D200/Configuration_adv.h | 82 ++--- .../Geeetech/Duplicator5/Configuration.h | 118 +++---- .../Geeetech/Duplicator5/Configuration_adv.h | 4 +- config/examples/Geeetech/E180/Configuration.h | 166 +++++----- .../Geeetech/E180/Configuration_adv.h | 81 ++--- .../examples/Geeetech/GT2560/Configuration.h | 80 +++-- .../Geeetech/I3_Pro_X-GT2560/Configuration.h | 70 +++-- config/examples/Geeetech/M201/Configuration.h | 137 ++++---- .../Geeetech/M201/Configuration_adv.h | 82 ++--- .../Geeetech/MeCreator2/Configuration.h | 113 +++---- .../Geeetech/MeCreator2/Configuration_adv.h | 17 +- .../Geeetech/Me_creator/Configuration.h | 76 ++--- .../Geeetech/Me_creator/Configuration_adv.h | 4 +- .../Geeetech/Me_ducer/Configuration.h | 100 +++--- .../Geeetech/Me_ducer/Configuration_adv.h | 6 +- .../Geeetech/PI3A PRO/Configuration.h | 136 ++++---- .../Geeetech/PI3A PRO/Configuration_adv.h | 28 +- .../Prusa i3 Pro B/bltouch/Configuration.h | 149 +++++---- .../Prusa i3 Pro B/noprobe/Configuration.h | 136 ++++---- .../Geeetech/Prusa i3 Pro C/Configuration.h | 50 +-- .../Prusa i3 Pro C/Configuration_adv.h | 22 +- .../Geeetech/Prusa i3 Pro W/Configuration.h | 40 +-- .../Prusa i3 Pro W/Configuration_adv.h | 22 +- config/examples/HMS434/Configuration.h | 171 +++++----- config/examples/HMS434/Configuration_adv.h | 76 ++--- .../examples/Infitary/i3-M508/Configuration.h | 70 +++-- .../Infitary/i3-M508/Configuration_adv.h | 14 +- .../Intamsys/FunmatHT 4988/Configuration.h | 136 ++++---- .../FunmatHT 4988/Configuration_adv.h | 96 +++--- config/examples/JGAurora/A1/Configuration.h | 181 ++++++----- .../examples/JGAurora/A1/Configuration_adv.h | 67 ++-- config/examples/JGAurora/A3/Configuration.h | 72 ++--- config/examples/JGAurora/A5/Configuration.h | 116 +++---- .../examples/JGAurora/A5/Configuration_adv.h | 34 +- config/examples/JGAurora/A5S/Configuration.h | 181 +++++------ .../examples/JGAurora/A5S/Configuration_adv.h | 67 ++-- .../examples/JGAurora/Magic/Configuration.h | 110 +++---- .../JGAurora/Magic/Configuration_adv.h | 42 +-- config/examples/Kingroon/KP3/Configuration.h | 161 +++++----- .../examples/Kingroon/KP3/Configuration_adv.h | 32 +- config/examples/Labists/ET4/Configuration.h | 207 +++++++----- .../examples/Labists/ET4/Configuration_adv.h | 52 +-- config/examples/MBot/Cube/Configuration.h | 125 ++++---- config/examples/MBot/Cube/Configuration_adv.h | 32 +- .../MakerFarm/Pegasus 12/Configuration.h | 168 +++++----- .../MakerFarm/Pegasus 12/Configuration_adv.h | 158 +++++----- config/examples/MakerParts/Configuration.h | 82 ++--- .../examples/MakerParts/Configuration_adv.h | 50 +-- config/examples/Malyan/M150/Configuration.h | 124 +++++--- .../examples/Malyan/M150/Configuration_adv.h | 26 +- config/examples/Malyan/M200/Configuration.h | 72 +++-- .../examples/Malyan/M200/Configuration_adv.h | 20 +- .../Micromake/C1/basic/Configuration.h | 54 ++-- .../Micromake/C1/enhanced/Configuration.h | 70 +++-- .../Micromake/C1/enhanced/Configuration_adv.h | 6 +- config/examples/Mks/Robin/Configuration.h | 55 ++-- config/examples/Mks/Robin/Configuration_adv.h | 2 + .../examples/Mks/Robin_Lite3/Configuration.h | 21 +- config/examples/Mks/Robin_Pro/Configuration.h | 36 ++- config/examples/Mks/Sbase/Configuration.h | 84 ++--- config/examples/Mks/Sbase/Configuration_adv.h | 26 +- config/examples/Modix/Big60/Configuration.h | 124 ++++---- .../examples/Modix/Big60/Configuration_adv.h | 76 ++--- config/examples/Nextion/Configuration.h | 14 +- config/examples/Nextion/Configuration_adv.h | 18 +- config/examples/Ortur 4/Configuration.h | 198 ++++++------ config/examples/Ortur 4/Configuration_adv.h | 135 ++++---- .../Printrbot/PrintrboardG2/Configuration.h | 102 +++--- .../Simple Metal RevD/Configuration.h | 66 ++-- config/examples/Prusa/MK3/Configuration.h | 266 ++++++++++------ config/examples/Prusa/MK3/Configuration_adv.h | 244 +++++++------- .../MK3S-BigTreeTech-BTT002/Configuration.h | 188 +++++------ .../Configuration_adv.h | 140 +++++---- config/examples/Qidi/Qidi 1/Configuration.h | 125 ++++---- .../examples/Qidi/Qidi 1/Configuration_adv.h | 48 +-- config/examples/Raiscube/A8r/Configuration.h | 165 ++++++---- .../examples/Raiscube/A8r/Configuration_adv.h | 26 +- .../examples/RapideLite/RL200/Configuration.h | 80 ++--- .../RapideLite/RL200/Configuration_adv.h | 6 +- .../examples/Renkforce/RF100/Configuration.h | 106 ++++--- .../Renkforce/RF100/Configuration_adv.h | 36 ++- .../Renkforce/RF100XL/Configuration.h | 104 +++--- .../Renkforce/RF100XL/Configuration_adv.h | 36 ++- .../Renkforce/RF100v2/Configuration.h | 106 ++++--- .../Renkforce/RF100v2/Configuration_adv.h | 36 ++- .../examples/RepRapPro/Huxley/Configuration.h | 100 ++++-- .../RepRapWorld/Megatronics/Configuration.h | 44 +-- config/examples/RigidBot/Configuration.h | 121 ++++--- config/examples/RigidBot/Configuration_adv.h | 22 +- config/examples/Robo3D/R1+/Configuration.h | 28 +- .../examples/SCARA/MP_SCARA/Configuration.h | 154 +++++---- .../SCARA/MP_SCARA/Configuration_adv.h | 33 +- config/examples/SCARA/Morgan/Configuration.h | 188 ++++++----- .../examples/SCARA/Morgan/Configuration_adv.h | 31 +- .../STM32/Black_STM32F407VET6/Configuration.h | 28 +- .../Black_STM32F407VET6/Configuration_adv.h | 8 +- .../STM32/STM32F103RE/Configuration.h | 74 ++--- config/examples/STM32/STM32F4/Configuration.h | 8 +- config/examples/Sanguinololu/Configuration.h | 67 +++- .../examples/Sanguinololu/Configuration_adv.h | 10 +- .../Configuration.h | 99 +++--- .../Configuration_adv.h | 46 +-- .../Sovol/SV-01/CrealityV22/Configuration.h | 107 ++++--- .../SV-01/CrealityV22/Configuration_adv.h | 59 ++-- .../Sovol/SV-01/CrealityV221/Configuration.h | 99 +++--- .../SV-01/CrealityV221/Configuration_adv.h | 25 +- .../examples/TPARA/AXEL_TPARA/Configuration.h | 168 +++++----- .../TPARA/AXEL_TPARA/Configuration_adv.h | 24 +- .../Tevo/Michelangelo/Configuration.h | 117 +++---- .../Tevo/Michelangelo/Configuration_adv.h | 32 +- config/examples/Tevo/Nereus/Configuration.h | 103 +++--- .../examples/Tevo/Nereus/Configuration_adv.h | 20 +- .../Tevo/Tarantula Pro/Configuration.h | 83 ++--- .../Tevo/Tarantula Pro/Configuration_adv.h | 22 +- .../Tornado/V1 (MKS Base)/Configuration.h | 131 ++++---- .../Tornado/V1 (MKS Base)/Configuration_adv.h | 40 +-- .../Tornado/V2 (MKS GEN-L)/Configuration.h | 134 ++++---- .../V2 (MKS GEN-L)/Configuration_adv.h | 40 +-- config/examples/TheBorg/Configuration.h | 80 ++--- config/examples/TheBorg/Configuration_adv.h | 16 +- config/examples/TinyBoy2/Configuration.h | 140 ++++++--- config/examples/TinyBoy2/Configuration_adv.h | 18 +- config/examples/Tronxy/X1/Configuration.h | 81 ++--- config/examples/Tronxy/X3A/Configuration.h | 106 ++++--- .../examples/Tronxy/X3A/Configuration_adv.h | 10 +- config/examples/Tronxy/X5S-2E/Configuration.h | 127 ++++---- .../Tronxy/X5S-2E/Configuration_adv.h | 18 +- config/examples/Tronxy/X5S/Configuration.h | 80 ++--- config/examples/Tronxy/X5SA/Configuration.h | 120 +++---- .../examples/Tronxy/X5SA/Configuration_adv.h | 20 +- config/examples/Tronxy/XY100/Configuration.h | 69 ++-- .../Two Trees/BlueR Plus/Configuration.h | 171 +++++----- .../Two Trees/BlueR Plus/Configuration_adv.h | 39 +-- .../Two Trees/BlueR/BlueR V1/Configuration.h | 189 ++++++----- .../BlueR/BlueR V1/Configuration_adv.h | 38 ++- .../Two Trees/BlueR/BlueR V2/Configuration.h | 194 +++++++----- .../BlueR/BlueR V2/Configuration_adv.h | 38 ++- .../Two Trees/BlueR/BlueR V3/Configuration.h | 193 +++++++----- .../BlueR/BlueR V3/Configuration_adv.h | 38 ++- .../Sapphire Plus V2/Configuration.h | 266 +++++++++------- .../Sapphire Plus V2/Configuration_adv.h | 135 ++++---- .../Two Trees/Sapphire Pro/Configuration.h | 198 +++++++----- .../Sapphire Pro/Configuration_adv.h | 52 +-- .../UltiMachine/Archim1/Configuration.h | 40 +-- .../UltiMachine/Archim1/Configuration_adv.h | 22 +- .../UltiMachine/Archim2/Configuration.h | 14 +- .../UltiMachine/Archim2/Configuration_adv.h | 8 +- .../Configuration.h | 54 ++-- .../Configuration_adv.h | 6 +- config/examples/VORONDesign/Configuration.h | 138 ++++---- .../examples/VORONDesign/Configuration_adv.h | 8 +- .../examples/Velleman/K8200/Configuration.h | 132 +++++--- .../Velleman/K8200/Configuration_adv.h | 51 +-- .../Velleman/K8400/Dual-head/Configuration.h | 106 ++++--- .../K8400/Dual-head/Configuration_adv.h | 32 +- .../K8400/Single-head/Configuration.h | 104 +++--- .../K8400/Single-head/Configuration_adv.h | 32 +- .../examples/WASP/PowerWASP/Configuration.h | 164 +++++----- .../WASP/PowerWASP/Configuration_adv.h | 42 +-- .../Wanhao/Duplicator 4S/Configuration.h | 128 ++++---- .../Wanhao/Duplicator 4S/Configuration_adv.h | 38 +-- .../Wanhao/Duplicator 6/Configuration.h | 103 +++--- .../Wanhao/Duplicator 6/Configuration_adv.h | 50 +-- .../Wanhao/Duplicator i3 2.1/Configuration.h | 108 +++---- .../Duplicator i3 2.1/Configuration_adv.h | 8 +- .../Wanhao/Duplicator i3 Mini/Configuration.h | 97 +++--- .../Duplicator i3 Mini/Configuration_adv.h | 24 +- config/examples/Weistek/wt150/Configuration.h | 79 ++--- .../Weistek/wt150/Configuration_adv.h | 14 +- .../examples/Zonestar/P802M/Configuration.h | 89 +++--- .../Zonestar/P802M/Configuration_adv.h | 16 +- .../Configuration.h | 100 +++--- .../Configuration_adv.h | 6 +- .../Kossel Linear Plus/Configuration.h | 297 +++++++++++------- .../Kossel Linear Plus/Configuration_adv.h | 47 +-- .../delta/Anycubic/Kossel/Configuration.h | 269 +++++++++------- .../delta/Anycubic/Kossel/Configuration_adv.h | 40 +-- .../delta/Anycubic/Predator/Configuration.h | 175 ++++++----- .../Anycubic/Predator/Configuration_adv.h | 61 ++-- .../delta/Dreammaker/Overlord/Configuration.h | 181 +++++------ .../Dreammaker/Overlord/Configuration_adv.h | 60 ++-- .../Dreammaker/Overlord_Pro/Configuration.h | 206 ++++++------ .../Overlord_Pro/Configuration_adv.h | 60 ++-- .../delta/FLSUN/Q5-nano_v1/Configuration.h | 221 ++++++------- .../FLSUN/Q5-nano_v1/Configuration_adv.h | 100 +++--- .../delta/FLSUN/Q5-nano_v2/Configuration.h | 157 ++++----- .../examples/delta/FLSUN/QQ-S/Configuration.h | 178 +++++------ .../delta/FLSUN/QQ-S/Configuration_adv.h | 32 +- .../delta/FLSUN/QQS-Pro/Configuration.h | 231 +++++++------- .../delta/FLSUN/QQS-Pro/Configuration_adv.h | 137 ++++---- .../FLSUN/auto_calibrate/Configuration.h | 167 +++++----- .../FLSUN/auto_calibrate/Configuration_adv.h | 4 +- .../delta/FLSUN/kossel/Configuration.h | 166 +++++----- .../delta/FLSUN/kossel/Configuration_adv.h | 4 +- .../delta/FLSUN/kossel_mini/Configuration.h | 146 ++++----- .../FLSUN/kossel_mini/Configuration_adv.h | 2 + .../delta/Geeetech/G2/Configuration.h | 167 +++++----- .../delta/Geeetech/G2/Configuration_adv.h | 133 ++++---- .../delta/Geeetech/G2Pro/Configuration.h | 167 +++++----- .../delta/Geeetech/G2Pro/Configuration_adv.h | 131 ++++---- .../delta/Geeetech/G2S/Configuration.h | 169 +++++----- .../delta/Geeetech/G2S/Configuration_adv.h | 131 ++++---- .../delta/Geeetech/G2SPro/Configuration.h | 169 +++++----- .../delta/Geeetech/G2SPro/Configuration_adv.h | 131 ++++---- .../Geeetech/Rostock 301/Configuration.h | 95 +++--- .../Geeetech/Rostock 301/Configuration_adv.h | 6 +- .../delta/Hatchbox_Alpha/Configuration.h | 93 +++--- .../delta/Hatchbox_Alpha/Configuration_adv.h | 14 +- .../examples/delta/MKS/SBASE/Configuration.h | 28 +- .../delta/MKS/SBASE/Configuration_adv.h | 16 +- .../delta/Malyan M300/Configuration.h | 147 ++++----- .../delta/Malyan M300/Configuration_adv.h | 22 +- .../delta/Tevo Little Monster/Configuration.h | 119 +++---- .../Tevo Little Monster/Configuration_adv.h | 18 +- config/examples/delta/generic/Configuration.h | 2 + .../delta/generic/Configuration_adv.h | 2 + .../delta/kossel_clear/Configuration.h | 148 ++++----- .../delta/kossel_clear/Configuration_adv.h | 48 +-- .../delta/kossel_mini/Configuration.h | 52 +-- .../examples/delta/kossel_pro/Configuration.h | 145 +++++---- .../examples/delta/kossel_xl/Configuration.h | 105 ++++--- .../delta/kossel_xl/Configuration_adv.h | 16 +- .../examples/gCreate/gMax1.5+/Configuration.h | 182 ++++++----- .../gCreate/gMax1.5+/Configuration_adv.h | 56 ++-- config/examples/makibox/Configuration.h | 59 ++-- config/examples/makibox/Configuration_adv.h | 22 +- config/examples/tvrrug/Round2/Configuration.h | 87 ++--- .../tvrrug/Round2/Configuration_adv.h | 22 +- 504 files changed, 24159 insertions(+), 21014 deletions(-) diff --git a/config/examples/3DFabXYZ/Migbot/Configuration.h b/config/examples/3DFabXYZ/Migbot/Configuration.h index 78c2dc9160..3fdc987dff 100644 --- a/config/examples/3DFabXYZ/Migbot/Configuration.h +++ b/config/examples/3DFabXYZ/Migbot/Configuration.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "3DFabXYZ/Migbot" + /** * Configuration.h * @@ -69,8 +71,9 @@ // @section info // Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes. +#define STRING_CONFIG_H_AUTHOR "AJMartel" // Who made the changes. //#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) +#define WEBSITE_URL "http://3DFabXYZ.com" /** * *** VENDORS PLEASE READ *** @@ -134,11 +137,11 @@ // Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_RAMPS_14_EFB + #define MOTHERBOARD BOARD_MKS_BASE_14 #endif // Name displayed in the LCD "Ready" message and Info menu -//#define CUSTOM_MACHINE_NAME "3D Printer" +#define CUSTOM_MACHINE_NAME "3DFabXYZ i3" // Printer's unique ID, used by some programs to differentiate between machines. // Choose your own or use a service like https://www.uuidgenerator.net/version4 @@ -424,7 +427,7 @@ #define TEMP_SENSOR_5 0 #define TEMP_SENSOR_6 0 #define TEMP_SENSOR_7 0 -#define TEMP_SENSOR_BED 0 +#define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 #define TEMP_SENSOR_COOLER 0 @@ -444,11 +447,11 @@ //#define TEMP_SENSOR_1_AS_REDUNDANT #define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10 -#define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 +#define TEMP_RESIDENCY_TIME 5 // (seconds) Time to wait for hotend to "settle" in M109 #define TEMP_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer #define TEMP_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target -#define TEMP_BED_RESIDENCY_TIME 10 // (seconds) Time to wait for bed to "settle" in M190 +#define TEMP_BED_RESIDENCY_TIME 5 // (seconds) Time to wait for bed to "settle" in M190 #define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer #define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target @@ -505,21 +508,22 @@ #define PID_K1 0.95 // Smoothing factor within any PID loop #if ENABLED(PIDTEMP) - //#define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) - //#define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) + #define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) + #define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) // Set/get with gcode: M301 E[extruder number, 0-2] + // Electron #if ENABLED(PID_PARAMS_PER_HOTEND) // Specify between 1 and HOTENDS values per array. // If fewer than EXTRUDER values are provided, the last element will be repeated. - #define DEFAULT_Kp_LIST { 22.20, 22.20 } - #define DEFAULT_Ki_LIST { 1.08, 1.08 } - #define DEFAULT_Kd_LIST { 114.00, 114.00 } + #define DEFAULT_Kp_LIST { 29.12, 29.12 } + #define DEFAULT_Ki_LIST { 3.22, 3.22 } + #define DEFAULT_Kd_LIST { 65.83, 65.83 } #else - #define DEFAULT_Kp 22.20 - #define DEFAULT_Ki 1.08 - #define DEFAULT_Kd 114.00 + #define DEFAULT_Kp 29.12 + #define DEFAULT_Ki 3.22 + #define DEFAULT_Kd 65.83 #endif #endif // PIDTEMP @@ -694,11 +698,11 @@ #define ENDSTOPPULLUPS #if DISABLED(ENDSTOPPULLUPS) // Disable ENDSTOPPULLUPS to set pullups individually - //#define ENDSTOPPULLUP_XMAX - //#define ENDSTOPPULLUP_YMAX - //#define ENDSTOPPULLUP_ZMAX - //#define ENDSTOPPULLUP_XMIN - //#define ENDSTOPPULLUP_YMIN + #define ENDSTOPPULLUP_XMAX + #define ENDSTOPPULLUP_YMAX + #define ENDSTOPPULLUP_ZMAX + #define ENDSTOPPULLUP_XMIN + #define ENDSTOPPULLUP_YMIN //#define ENDSTOPPULLUP_ZMIN //#define ENDSTOPPULLUP_ZMIN_PROBE #endif @@ -717,13 +721,13 @@ #endif // Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define X_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_PROBE_ENDSTOP_INVERTING false // Set to true to invert the logic of the probe. +#define X_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Y_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Z_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define X_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Y_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Z_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Z_MIN_PROBE_ENDSTOP_INVERTING true // Set to true to invert the logic of the probe. /** * Stepper Drivers @@ -806,14 +810,14 @@ * Override with M92 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 500 } +#define DEFAULT_AXIS_STEPS_PER_UNIT { 79.9738621, 80.2429911, 399.7264854 , 99.4696994 } /** * Default Max Feed Rate (mm/s) * Override with M203 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 } +#define DEFAULT_MAX_FEEDRATE { 225, 225, 3, 25 } //#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 #if ENABLED(LIMITED_MAX_FR_EDITING) @@ -826,7 +830,7 @@ * Override with M201 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 } +#define DEFAULT_MAX_ACCELERATION { 1590, 1590, 100, 10000 } //#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 #if ENABLED(LIMITED_MAX_ACCEL_EDITING) @@ -841,9 +845,9 @@ * M204 R Retract Acceleration * M204 T Travel Acceleration */ -#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves +#define DEFAULT_ACCELERATION 1590 // X, Y, Z and E acceleration for printing moves #define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves +#define DEFAULT_TRAVEL_ACCELERATION 1590 // X, Y, Z acceleration for travel (non printing) moves /** * Default Jerk limits (mm/s) @@ -855,8 +859,8 @@ */ //#define CLASSIC_JERK #if ENABLED(CLASSIC_JERK) - #define DEFAULT_XJERK 10.0 - #define DEFAULT_YJERK 10.0 + #define DEFAULT_XJERK 8.0 + #define DEFAULT_YJERK 8.0 #define DEFAULT_ZJERK 0.3 //#define TRAVEL_EXTRA_XYJERK 0.0 // Additional jerk allowance for all travel moves @@ -877,7 +881,7 @@ * https://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html */ #if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.013 // (mm) Distance from real junction edge + #define JUNCTION_DEVIATION_MM 0.016 // (mm) Distance from real junction edge #define JD_HANDLE_SMALL_SEGMENTS // Use curvature estimation instead of just the junction angle // for small segments (< 1mm) with large junction angles (> 135°). #endif @@ -890,7 +894,7 @@ * * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained */ -//#define S_CURVE_ACCELERATION +#define S_CURVE_ACCELERATION //=========================================================================== //============================= Z Probe Options ============================= @@ -946,7 +950,7 @@ * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. * (e.g., an inductive probe or a nozzle-based probe-switch.) */ -//#define FIX_MOUNTED_PROBE +#define FIX_MOUNTED_PROBE /** * Use the nozzle as the probe, as with a conductive @@ -1055,14 +1059,14 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +#define NOZZLE_TO_PROBE_OFFSET { 21, 61, 0 } // Most probes should stay away from the edges of the bed, but // with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed (mm/min) between probes -#define XY_PROBE_FEEDRATE (133*60) +#define XY_PROBE_FEEDRATE (125*60) // Feedrate (mm/min) for the first approach when double-probing (MULTIPLE_PROBING == 2) #define Z_PROBE_FEEDRATE_FAST (4*60) @@ -1123,8 +1127,8 @@ * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. */ -#define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow -#define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points +#define Z_CLEARANCE_DEPLOY_PROBE 5 // Z Clearance for Deploy/Stow +#define Z_CLEARANCE_BETWEEN_PROBES 3 // Z Clearance between probe points #define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes //#define Z_AFTER_PROBING 5 // Z position after probing is done @@ -1190,9 +1194,9 @@ // @section machine // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR false -#define INVERT_Y_DIR true -#define INVERT_Z_DIR false +#define INVERT_X_DIR true +#define INVERT_Y_DIR false +#define INVERT_Z_DIR true // @section extruder @@ -1218,7 +1222,7 @@ */ //#define Z_IDLE_HEIGHT Z_HOME_POS -//#define Z_HOMING_HEIGHT 4 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ... +//#define Z_HOMING_HEIGHT 3 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ... // Be sure to have this much clearance over your Z_MAX_POS to prevent grinding. //#define Z_AFTER_HOMING 10 // (mm) Height to move to after homing Z @@ -1232,8 +1236,8 @@ // @section machine // The size of the printable area -#define X_BED_SIZE 200 -#define Y_BED_SIZE 200 +#define X_BED_SIZE 219 +#define Y_BED_SIZE 280 // Travel limits (mm) after homing, corresponding to endstop positions. #define X_MIN_POS 0 @@ -1285,7 +1289,7 @@ * RAMPS-based boards use SERVO3_PIN for the first runout sensor. * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. */ -//#define FILAMENT_RUNOUT_SENSOR +#define FILAMENT_RUNOUT_SENSOR #if ENABLED(FILAMENT_RUNOUT_SENSOR) #define FIL_RUNOUT_ENABLED_DEFAULT true // Enable the sensor on startup. Override with M412 followed by M500. #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. @@ -1387,7 +1391,7 @@ */ //#define AUTO_BED_LEVELING_3POINT //#define AUTO_BED_LEVELING_LINEAR -//#define AUTO_BED_LEVELING_BILINEAR +#define AUTO_BED_LEVELING_BILINEAR //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING @@ -1396,7 +1400,7 @@ * these options to restore the prior leveling state or to always enable * leveling immediately after G28. */ -//#define RESTORE_LEVELING_AFTER_G28 +#define RESTORE_LEVELING_AFTER_G28 //#define ENABLE_LEVELING_AFTER_G28 /** @@ -1438,7 +1442,7 @@ /** * Enable the G26 Mesh Validation Pattern tool. */ - //#define G26_MESH_VALIDATION + #define G26_MESH_VALIDATION #if ENABLED(G26_MESH_VALIDATION) #define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle. #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for G26. @@ -1455,7 +1459,7 @@ // Set the number of grid points per dimension. #define GRID_MAX_POINTS_X 3 - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X + #define GRID_MAX_POINTS_Y 4 // Probe along the Y axis, advancing X after each column //#define PROBE_Y_FIRST @@ -1518,7 +1522,7 @@ * Add a bed leveling sub-menu for ABL or MBL. * Include a guided procedure if manual probing is enabled. */ -//#define LCD_BED_LEVELING +#define LCD_BED_LEVELING #if ENABLED(LCD_BED_LEVELING) #define MESH_EDIT_Z_STEP 0.025 // (mm) Step size while manually probing Z axis. @@ -1527,7 +1531,7 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS +#define LEVEL_BED_CORNERS #if ENABLED(LEVEL_BED_CORNERS) #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets @@ -1574,9 +1578,9 @@ // Manually set the home position. Leave these undefined for automatic settings. // For DELTA this is the top-center of the Cartesian print volume. -//#define MANUAL_X_HOME_POS 0 -//#define MANUAL_Y_HOME_POS 0 -//#define MANUAL_Z_HOME_POS 0 +#define MANUAL_X_HOME_POS 0 +#define MANUAL_Y_HOME_POS 0 +#define MANUAL_Z_HOME_POS 0 // Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area. // @@ -1587,7 +1591,7 @@ // - Move the Z probe (or nozzle) to a defined XY point before Z Homing. // - Prevent Z homing when the Z probe is outside bed area. // -//#define Z_SAFE_HOMING +#define Z_SAFE_HOMING #if ENABLED(Z_SAFE_HOMING) #define Z_SAFE_HOMING_X_POINT X_CENTER // X point for Z homing @@ -1706,17 +1710,47 @@ // Preheat Constants - Up to 5 are supported without changes // #define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 180 -#define PREHEAT_1_TEMP_BED 70 +#define PREHEAT_1_TEMP_HOTEND 205 +#define PREHEAT_1_TEMP_BED 60 #define PREHEAT_1_TEMP_CHAMBER 35 #define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 #define PREHEAT_2_LABEL "ABS" -#define PREHEAT_2_TEMP_HOTEND 240 -#define PREHEAT_2_TEMP_BED 110 +#define PREHEAT_2_TEMP_HOTEND 255 +#define PREHEAT_2_TEMP_BED 100 #define PREHEAT_2_TEMP_CHAMBER 35 #define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 +#define PREHEAT_3_LABEL "HIPS" +#define PREHEAT_3_TEMP_HOTEND 220 // HIPS +#define PREHEAT_3_TEMP_BED 100 +#define PREHEAT_3_TEMP_CHAMBER 35 +#define PREHEAT_3_FAN_SPEED 0 // Value from 0 to 255 + +#define PREHEAT_4_LABEL "PP" +#define PREHEAT_4_TEMP_HOTEND 254 // PP +#define PREHEAT_4_TEMP_BED 100 +#define PREHEAT_4_TEMP_CHAMBER 35 +#define PREHEAT_4_FAN_SPEED 0 // Value from 0 to 255 + +#define PREHEAT_5_LABEL "PET" +#define PREHEAT_5_TEMP_HOTEND 240 // PET +#define PREHEAT_5_TEMP_BED 90 +#define PREHEAT_5_TEMP_CHAMBER 35 +#define PREHEAT_5_FAN_SPEED 0 // Value from 0 to 255 + +#define PREHEAT_6_LABEL "FLEX" +#define PREHEAT_6_TEMP_HOTEND 230 // FLEX +#define PREHEAT_6_TEMP_BED 50 +#define PREHEAT_6_TEMP_CHAMBER 35 +#define PREHEAT_6_FAN_SPEED 0 // Value from 0 to 255 + +#define PREHEAT_7_LABEL "NYLON" +#define PREHEAT_7_TEMP_HOTEND 240 // NYLON +#define PREHEAT_7_TEMP_BED 80 +#define PREHEAT_7_TEMP_CHAMBER 35 +#define PREHEAT_7_FAN_SPEED 0 // Value from 0 to 255 + /** * Nozzle Park * @@ -1728,7 +1762,7 @@ * P1 Raise the nozzle always to Z-park height. * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. */ -//#define NOZZLE_PARK_FEATURE +#define NOZZLE_PARK_FEATURE #if ENABLED(NOZZLE_PARK_FEATURE) // Specify a park position as { X, Y, Z_raise } @@ -1936,14 +1970,14 @@ * SD Card support is disabled by default. If your controller has an SD slot, * you must uncomment the following option or it won't work. */ -//#define SDSUPPORT +#define SDSUPPORT /** * SD CARD: ENABLE CRC * * Use CRC checks and retries on the SD communication. */ -//#define SD_CHECK_AND_RETRY +#define SD_CHECK_AND_RETRY /** * LCD Menu Items @@ -2037,7 +2071,7 @@ // // Note: Usually sold with a white PCB. // -//#define REPRAP_DISCOUNT_SMART_CONTROLLER +#define REPRAP_DISCOUNT_SMART_CONTROLLER // // GT2560 (YHCB2004) LCD Display @@ -2675,10 +2709,10 @@ //#define RGBW_LED #if EITHER(RGB_LED, RGBW_LED) - //#define RGB_LED_R_PIN 34 - //#define RGB_LED_G_PIN 43 - //#define RGB_LED_B_PIN 35 - //#define RGB_LED_W_PIN -1 + #define RGB_LED_R_PIN 50 + #define RGB_LED_G_PIN 51 + #define RGB_LED_B_PIN 52 + #define RGB_LED_W_PIN -1 #endif // Support for Adafruit NeoPixel LED driver diff --git a/config/examples/3DFabXYZ/Migbot/Configuration_adv.h b/config/examples/3DFabXYZ/Migbot/Configuration_adv.h index 5335fa012a..4749bfed06 100644 --- a/config/examples/3DFabXYZ/Migbot/Configuration_adv.h +++ b/config/examples/3DFabXYZ/Migbot/Configuration_adv.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "3DFabXYZ/Migbot" + /** * Configuration_adv.h * @@ -461,13 +463,13 @@ * The fan turns on automatically whenever any driver is enabled and turns * off (or reduces to idle speed) shortly after drivers are turned off. */ -//#define USE_CONTROLLER_FAN +#define USE_CONTROLLER_FAN #if ENABLED(USE_CONTROLLER_FAN) - //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan + #define CONTROLLER_FAN_PIN 7 // Set a custom pin for the controller fan //#define CONTROLLER_FAN_USE_Z_ONLY // With this option only the Z axis is considered //#define CONTROLLER_FAN_IGNORE_Z // Ignore Z stepper. Useful when stepper timeout is disabled. #define CONTROLLERFAN_SPEED_MIN 0 // (0-255) Minimum speed. (If set below this value the fan is turned off.) - #define CONTROLLERFAN_SPEED_ACTIVE 255 // (0-255) Active speed, used when any motor is enabled + #define CONTROLLERFAN_SPEED_ACTIVE 127 // (0-255) Active speed, used when any motor is enabled #define CONTROLLERFAN_SPEED_IDLE 0 // (0-255) Idle speed, used when motors are disabled #define CONTROLLERFAN_IDLE_TIME 60 // (seconds) Extra time to keep the fan running after disabling motors //#define CONTROLLER_FAN_EDITABLE // Enable M710 configurable settings @@ -573,15 +575,15 @@ /** * M355 Case Light on-off / brightness */ -//#define CASE_LIGHT_ENABLE +#define CASE_LIGHT_ENABLE #if ENABLED(CASE_LIGHT_ENABLE) - //#define CASE_LIGHT_PIN 4 // Override the default pin if needed + #define CASE_LIGHT_PIN 11 // Override the default pin if needed #define INVERT_CASE_LIGHT false // Set true if Case Light is ON when pin is LOW - #define CASE_LIGHT_DEFAULT_ON true // Set default power-up state on + #define CASE_LIGHT_DEFAULT_ON false // Set default power-up state on #define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // Set default power-up brightness (0-255, requires PWM pin) //#define CASE_LIGHT_NO_BRIGHTNESS // Disable brightness control. Enable for non-PWM lighting. //#define CASE_LIGHT_MAX_PWM 128 // Limit PWM duty cycle (0-255) - //#define CASE_LIGHT_MENU // Add Case Light options to the LCD menu + #define CASE_LIGHT_MENU // Add Case Light options to the LCD menu #if ENABLED(NEOPIXEL_LED) //#define CASE_LIGHT_USE_NEOPIXEL // Use NeoPixel LED as case light #endif @@ -867,7 +869,7 @@ // On a 300mm bed a 5% grade would give a misalignment of ~1.5cm #define G34_MAX_GRADE 5 // (%) Maximum incline that G34 will handle - #define Z_STEPPER_ALIGN_ITERATIONS 5 // Number of iterations to apply during alignment + #define Z_STEPPER_ALIGN_ITERATIONS 3 // Number of iterations to apply during alignment #define Z_STEPPER_ALIGN_ACC 0.02 // Stop iterating early if the accuracy is better than this #define RESTORE_LEVELING_AFTER_G34 // Restore leveling after G34 is done? // After G34, re-home Z (G28 Z) or just calculate it from the last probe heights? @@ -1059,7 +1061,7 @@ * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the * lowest stepping frequencies. */ -//#define ADAPTIVE_STEP_SMOOTHING +#define ADAPTIVE_STEP_SMOOTHING /** * Custom Microstepping @@ -1145,8 +1147,8 @@ // Change values more rapidly when the encoder is rotated faster #define ENCODER_RATE_MULTIPLIER #if ENABLED(ENCODER_RATE_MULTIPLIER) - #define ENCODER_10X_STEPS_PER_SEC 30 // (steps/s) Encoder rate for 10x speed - #define ENCODER_100X_STEPS_PER_SEC 80 // (steps/s) Encoder rate for 100x speed + #define ENCODER_10X_STEPS_PER_SEC 75 // (steps/s) Encoder rate for 10x speed + #define ENCODER_100X_STEPS_PER_SEC 160 // (steps/s) Encoder rate for 100x speed #endif // Play a beep when the feedrate is changed from the Status Screen @@ -1175,7 +1177,7 @@ #endif // Include a page of printer information in the LCD Main Menu - //#define LCD_INFO_MENU + #define LCD_INFO_MENU #if ENABLED(LCD_INFO_MENU) //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages #endif @@ -1229,7 +1231,7 @@ #endif // Scroll a longer status message into view - //#define STATUS_MESSAGE_SCROLLING + #define STATUS_MESSAGE_SCROLLING // On the Info Screen, display XY with one decimal place when possible //#define LCD_DECIMAL_SMALL_XY @@ -1301,7 +1303,7 @@ //#define BROWSE_MEDIA_ON_INSERT // Open the file browser when media is inserted - #define EVENT_GCODE_SD_ABORT "G28XY" // G-code to run on SD Abort Print (e.g., "G28XY" or "G27") + #define EVENT_GCODE_SD_ABORT "G27" // G-code to run on SD Abort Print (e.g., "G28XY" or "G27") #if ENABLED(PRINTER_EVENT_LEDS) #define PE_LEDS_COMPLETED_TIME (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination @@ -1384,7 +1386,7 @@ //#define LONG_FILENAME_HOST_SUPPORT // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES + #define SCROLL_LONG_FILENAMES // Leave the heaters on after Stop Print (not recommended!) //#define SD_ABORT_NO_COOLDOWN @@ -2311,7 +2313,7 @@ * * Enable PARK_HEAD_ON_PAUSE to add the G-code M125 Pause and Park. */ -//#define ADVANCED_PAUSE_FEATURE +#define ADVANCED_PAUSE_FEATURE #if ENABLED(ADVANCED_PAUSE_FEATURE) #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. @@ -2352,7 +2354,7 @@ //#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. //#define HOME_BEFORE_FILAMENT_CHANGE // If needed, home before parking for filament change - //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. + #define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) #endif @@ -3104,7 +3106,7 @@ * Add the M240 G-code to take a photo. * The photo can be triggered by a digital pin or a physical movement. */ -//#define PHOTO_GCODE +#define PHOTO_GCODE #if ENABLED(PHOTO_GCODE) // A position to move to (and raise Z) before taking the photo //#define PHOTO_POSITION { X_MAX_POS - 5, Y_MAX_POS, 0 } // { xpos, ypos, zraise } (M240 X Y Z) @@ -3113,17 +3115,17 @@ // Canon RC-1 or homebrew digital camera trigger // Data from: https://www.doc-diy.net/photo/rc-1_hacked/ - //#define PHOTOGRAPH_PIN 23 + //#define PHOTOGRAPH_PIN 12 // Canon Hack Development Kit // https://captain-slow.dk/2014/03/09/3d-printing-timelapses/ - //#define CHDK_PIN 4 + #define CHDK_PIN 12 // Optional second move with delay to trigger the camera shutter //#define PHOTO_SWITCH_POSITION { X_MAX_POS, Y_MAX_POS } // { xpos, ypos } (M240 I J) // Duration to hold the switch or keep CHDK_PIN high - //#define PHOTO_SWITCH_MS 50 // (ms) (M240 D) + #define PHOTO_SWITCH_MS 50 // (ms) (M240 D) /** * PHOTO_PULSES_US may need adjustment depending on board and camera model. @@ -3546,33 +3548,29 @@ */ // Custom Menu: Main Menu -//#define CUSTOM_MENU_MAIN +#define CUSTOM_MENU_MAIN #if ENABLED(CUSTOM_MENU_MAIN) - //#define CUSTOM_MENU_MAIN_TITLE "Custom Commands" - #define CUSTOM_MENU_MAIN_SCRIPT_DONE "M117 User Script Done" + #define CUSTOM_MENU_MAIN_TITLE "Tools" + #define CUSTOM_MENU_MAIN_SCRIPT_DONE "M117 Done" #define CUSTOM_MENU_MAIN_SCRIPT_AUDIBLE_FEEDBACK //#define CUSTOM_MENU_MAIN_SCRIPT_RETURN // Return to status screen after a script #define CUSTOM_MENU_MAIN_ONLY_IDLE // Only show custom menu when the machine is idle - #define MAIN_MENU_ITEM_1_DESC "Home & UBL Info" - #define MAIN_MENU_ITEM_1_GCODE "G28\nG29 W" + #define MAIN_MENU_ITEM_1_DESC "Probe Mesh&Save" + #define MAIN_MENU_ITEM_1_GCODE "G28\nG29 P1\nG29 P3 T0\nG29 S0 A F10\nG29 J2\nM500" //#define MAIN_MENU_ITEM_1_CONFIRM // Show a confirmation dialog before this action - #define MAIN_MENU_ITEM_2_DESC "Preheat for " PREHEAT_1_LABEL - #define MAIN_MENU_ITEM_2_GCODE "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND) + #define MAIN_MENU_ITEM_2_DESC "Manual Mesh&Save" + #define MAIN_MENU_ITEM_2_GCODE "G28\nG29 P4 R999 T\nG29 S0 A F10\nM500" //#define MAIN_MENU_ITEM_2_CONFIRM - //#define MAIN_MENU_ITEM_3_DESC "Preheat for " PREHEAT_2_LABEL - //#define MAIN_MENU_ITEM_3_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) + #define MAIN_MENU_ITEM_3_DESC "Print Test Pattern" + #define MAIN_MENU_ITEM_3_GCODE "G26 C P O2.25" // Do a typical test sequence //#define MAIN_MENU_ITEM_3_CONFIRM - //#define MAIN_MENU_ITEM_4_DESC "Heat Bed/Home/Level" - //#define MAIN_MENU_ITEM_4_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29" + #define MAIN_MENU_ITEM_4_DESC "Move Bed Forward" + #define MAIN_MENU_ITEM_4_GCODE "G28 X0 Y0\nG1 X0 Y180 F3000\nM84" // move X/Y to min endstops & Feed the bed forward & steppers off //#define MAIN_MENU_ITEM_4_CONFIRM - - //#define MAIN_MENU_ITEM_5_DESC "Home & Info" - //#define MAIN_MENU_ITEM_5_GCODE "G28\nM503" - //#define MAIN_MENU_ITEM_5_CONFIRM #endif // Custom Menu: Configuration Menu diff --git a/config/examples/ADIMLab/Gantry v1/Configuration.h b/config/examples/ADIMLab/Gantry v1/Configuration.h index 78c2dc9160..6a7e552057 100644 --- a/config/examples/ADIMLab/Gantry v1/Configuration.h +++ b/config/examples/ADIMLab/Gantry v1/Configuration.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "ADIMLab/Gantry v1" + /** * Configuration.h * @@ -69,7 +71,7 @@ // @section info // Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes. +#define STRING_CONFIG_H_AUTHOR "(ETE-Design, Gantry v1)" // Who made the changes. //#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) /** @@ -87,7 +89,7 @@ #define SHOW_BOOTSCREEN // Show the bitmap in Marlin/_Bootscreen.h on startup. -//#define SHOW_CUSTOM_BOOTSCREEN +#define SHOW_CUSTOM_BOOTSCREEN // Show the bitmap in Marlin/_Statusscreen.h on the status screen. //#define CUSTOM_STATUS_SCREEN_IMAGE @@ -134,11 +136,11 @@ // Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_RAMPS_14_EFB + #define MOTHERBOARD BOARD_HJC2560C_REV1 #endif // Name displayed in the LCD "Ready" message and Info menu -//#define CUSTOM_MACHINE_NAME "3D Printer" +#define CUSTOM_MACHINE_NAME "ADIMLab Gantry v1" // Printer's unique ID, used by some programs to differentiate between machines. // Choose your own or use a service like https://www.uuidgenerator.net/version4 @@ -424,7 +426,7 @@ #define TEMP_SENSOR_5 0 #define TEMP_SENSOR_6 0 #define TEMP_SENSOR_7 0 -#define TEMP_SENSOR_BED 0 +#define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 #define TEMP_SENSOR_COOLER 0 @@ -458,7 +460,7 @@ // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. -#define HEATER_0_MINTEMP 5 +#define HEATER_0_MINTEMP 1 #define HEATER_1_MINTEMP 5 #define HEATER_2_MINTEMP 5 #define HEATER_3_MINTEMP 5 @@ -466,7 +468,7 @@ #define HEATER_5_MINTEMP 5 #define HEATER_6_MINTEMP 5 #define HEATER_7_MINTEMP 5 -#define BED_MINTEMP 5 +#define BED_MINTEMP 1 #define CHAMBER_MINTEMP 5 // Above this temperature the heater will be switched off. @@ -480,7 +482,7 @@ #define HEATER_5_MAXTEMP 275 #define HEATER_6_MAXTEMP 275 #define HEATER_7_MAXTEMP 275 -#define BED_MAXTEMP 150 +#define BED_MAXTEMP 120 #define CHAMBER_MAXTEMP 60 /** @@ -634,7 +636,7 @@ * Note: For Bowden Extruders make this large enough to allow load/unload. */ #define PREVENT_LENGTHY_EXTRUDE -#define EXTRUDE_MAXLENGTH 200 +#define EXTRUDE_MAXLENGTH 1300 //=========================================================================== //======================== Thermal Runaway Protection ======================= @@ -717,13 +719,13 @@ #endif // Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define X_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_PROBE_ENDSTOP_INVERTING false // Set to true to invert the logic of the probe. +#define X_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Y_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Z_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define X_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Y_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Z_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Z_MIN_PROBE_ENDSTOP_INVERTING true // Set to true to invert the logic of the probe. /** * Stepper Drivers @@ -806,7 +808,7 @@ * Override with M92 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 500 } +#define DEFAULT_AXIS_STEPS_PER_UNIT { 80.4, 80.4, 400, 94 } /** * Default Max Feed Rate (mm/s) @@ -826,7 +828,7 @@ * Override with M201 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 } +#define DEFAULT_MAX_ACCELERATION { 2000, 2000, 50, 2000 } //#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 #if ENABLED(LIMITED_MAX_ACCEL_EDITING) @@ -841,9 +843,9 @@ * M204 R Retract Acceleration * M204 T Travel Acceleration */ -#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves +#define DEFAULT_ACCELERATION 1000 // X, Y, Z and E acceleration for printing moves +#define DEFAULT_RETRACT_ACCELERATION 1000 // E acceleration for retracts +#define DEFAULT_TRAVEL_ACCELERATION 1000 // X, Y, Z acceleration for travel (non printing) moves /** * Default Jerk limits (mm/s) @@ -877,7 +879,7 @@ * https://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html */ #if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.013 // (mm) Distance from real junction edge + #define JUNCTION_DEVIATION_MM 0.16 // (mm) Distance from real junction edge #define JD_HANDLE_SMALL_SEGMENTS // Use curvature estimation instead of just the junction angle // for small segments (< 1mm) with large junction angles (> 135°). #endif @@ -906,7 +908,7 @@ * The probe replaces the Z-MIN endstop and is used for Z homing. * (Automatically enables USE_PROBE_FOR_Z_HOMING.) */ -#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN +//#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN // Force the use of the probe for Z-axis homing //#define USE_PROBE_FOR_Z_HOMING @@ -1191,8 +1193,8 @@ // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR false -#define INVERT_Y_DIR true -#define INVERT_Z_DIR false +#define INVERT_Y_DIR false +#define INVERT_Z_DIR true // @section extruder @@ -1232,8 +1234,8 @@ // @section machine // The size of the printable area -#define X_BED_SIZE 200 -#define Y_BED_SIZE 200 +#define X_BED_SIZE 325 +#define Y_BED_SIZE 325 // Travel limits (mm) after homing, corresponding to endstop positions. #define X_MIN_POS 0 @@ -1241,7 +1243,7 @@ #define Z_MIN_POS 0 #define X_MAX_POS X_BED_SIZE #define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 200 +#define Z_MAX_POS 415 /** * Software Endstops @@ -1285,10 +1287,11 @@ * RAMPS-based boards use SERVO3_PIN for the first runout sensor. * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. */ -//#define FILAMENT_RUNOUT_SENSOR +#define FILAMENT_RUNOUT_SENSOR #if ENABLED(FILAMENT_RUNOUT_SENSOR) #define FIL_RUNOUT_ENABLED_DEFAULT true // Enable the sensor on startup. Override with M412 followed by M500. #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. + #define FIL_RUNOUT_PIN 24 #define FIL_RUNOUT_STATE LOW // Pin state indicating that filament is NOT present. #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. @@ -1672,7 +1675,7 @@ * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) */ -//#define EEPROM_SETTINGS // Persistent storage with M500 and M501 +#define EEPROM_SETTINGS // Persistent storage with M500 and M501 //#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. #define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load @@ -1687,7 +1690,7 @@ // every couple of seconds when it can't accept commands. // #define HOST_KEEPALIVE_FEATURE // Disable this if your host doesn't like keepalive messages -#define DEFAULT_KEEPALIVE_INTERVAL 2 // Number of seconds between "busy" messages. Set with M113. +#define DEFAULT_KEEPALIVE_INTERVAL 5 // Number of seconds between "busy" messages. Set with M113. #define BUSY_WHILE_HEATING // Some hosts require "busy" messages even during heating // @@ -1706,14 +1709,14 @@ // Preheat Constants - Up to 5 are supported without changes // #define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 180 -#define PREHEAT_1_TEMP_BED 70 +#define PREHEAT_1_TEMP_HOTEND 195 +#define PREHEAT_1_TEMP_BED 55 #define PREHEAT_1_TEMP_CHAMBER 35 #define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 #define PREHEAT_2_LABEL "ABS" -#define PREHEAT_2_TEMP_HOTEND 240 -#define PREHEAT_2_TEMP_BED 110 +#define PREHEAT_2_TEMP_HOTEND 230 +#define PREHEAT_2_TEMP_BED 70 #define PREHEAT_2_TEMP_CHAMBER 35 #define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 @@ -1728,7 +1731,7 @@ * P1 Raise the nozzle always to Z-park height. * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. */ -//#define NOZZLE_PARK_FEATURE +#define NOZZLE_PARK_FEATURE #if ENABLED(NOZZLE_PARK_FEATURE) // Specify a park position as { X, Y, Z_raise } @@ -1736,7 +1739,7 @@ //#define NOZZLE_PARK_X_ONLY // X move only is required to park //#define NOZZLE_PARK_Y_ONLY // Y move only is required to park #define NOZZLE_PARK_Z_RAISE_MIN 2 // (mm) Always raise Z by at least this distance - #define NOZZLE_PARK_XY_FEEDRATE 100 // (mm/s) X and Y axes feedrate (also used for delta Z axis) + #define NOZZLE_PARK_XY_FEEDRATE 60 // (mm/s) X and Y axes feedrate (also used for delta Z axis) #define NOZZLE_PARK_Z_FEEDRATE 5 // (mm/s) Z axis feedrate (not used for delta printers) #endif @@ -1936,7 +1939,7 @@ * SD Card support is disabled by default. If your controller has an SD slot, * you must uncomment the following option or it won't work. */ -//#define SDSUPPORT +#define SDSUPPORT /** * SD CARD: ENABLE CRC @@ -2014,7 +2017,7 @@ // If you have a speaker that can produce tones, enable it here. // By default Marlin assumes you have a buzzer with a fixed frequency. // -//#define SPEAKER +#define SPEAKER // // The duration and frequency for the UI feedback sound. @@ -2195,7 +2198,7 @@ // RepRapDiscount FULL GRAPHIC Smart Controller // https://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller // -//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER +#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER // // K.3D Full Graphic Smart Controller diff --git a/config/examples/ADIMLab/Gantry v1/Configuration_adv.h b/config/examples/ADIMLab/Gantry v1/Configuration_adv.h index 5335fa012a..fab289a14e 100644 --- a/config/examples/ADIMLab/Gantry v1/Configuration_adv.h +++ b/config/examples/ADIMLab/Gantry v1/Configuration_adv.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "ADIMLab/Gantry v1" + /** * Configuration_adv.h * @@ -272,7 +274,7 @@ /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds + #define WATCH_BED_TEMP_PERIOD 360 // Seconds #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius #endif @@ -573,15 +575,15 @@ /** * M355 Case Light on-off / brightness */ -//#define CASE_LIGHT_ENABLE +#define CASE_LIGHT_ENABLE #if ENABLED(CASE_LIGHT_ENABLE) - //#define CASE_LIGHT_PIN 4 // Override the default pin if needed + //#define CASE_LIGHT_PIN 8 // Override the default pin if needed #define INVERT_CASE_LIGHT false // Set true if Case Light is ON when pin is LOW #define CASE_LIGHT_DEFAULT_ON true // Set default power-up state on #define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // Set default power-up brightness (0-255, requires PWM pin) - //#define CASE_LIGHT_NO_BRIGHTNESS // Disable brightness control. Enable for non-PWM lighting. + #define CASE_LIGHT_NO_BRIGHTNESS // Disable brightness control. Enable for non-PWM lighting. //#define CASE_LIGHT_MAX_PWM 128 // Limit PWM duty cycle (0-255) - //#define CASE_LIGHT_MENU // Add Case Light options to the LCD menu + #define CASE_LIGHT_MENU // Add Case Light options to the LCD menu #if ENABLED(NEOPIXEL_LED) //#define CASE_LIGHT_USE_NEOPIXEL // Use NeoPixel LED as case light #endif @@ -867,7 +869,7 @@ // On a 300mm bed a 5% grade would give a misalignment of ~1.5cm #define G34_MAX_GRADE 5 // (%) Maximum incline that G34 will handle - #define Z_STEPPER_ALIGN_ITERATIONS 5 // Number of iterations to apply during alignment + #define Z_STEPPER_ALIGN_ITERATIONS 3 // Number of iterations to apply during alignment #define Z_STEPPER_ALIGN_ACC 0.02 // Stop iterating early if the accuracy is better than this #define RESTORE_LEVELING_AFTER_G34 // Restore leveling after G34 is done? // After G34, re-home Z (G28 Z) or just calculate it from the last probe heights? @@ -1145,8 +1147,8 @@ // Change values more rapidly when the encoder is rotated faster #define ENCODER_RATE_MULTIPLIER #if ENABLED(ENCODER_RATE_MULTIPLIER) - #define ENCODER_10X_STEPS_PER_SEC 30 // (steps/s) Encoder rate for 10x speed - #define ENCODER_100X_STEPS_PER_SEC 80 // (steps/s) Encoder rate for 100x speed + #define ENCODER_10X_STEPS_PER_SEC 75 // (steps/s) Encoder rate for 10x speed + #define ENCODER_100X_STEPS_PER_SEC 160 // (steps/s) Encoder rate for 100x speed #endif // Play a beep when the feedrate is changed from the Status Screen @@ -1219,7 +1221,7 @@ #if HAS_DISPLAY // The timeout (in ms) to return to the status screen from sub-menus - //#define LCD_TIMEOUT_TO_STATUS 15000 + #define LCD_TIMEOUT_TO_STATUS 60000 #if ENABLED(SHOW_BOOTSCREEN) #define BOOTSCREEN_TIMEOUT 4000 // (ms) Total Duration to display the boot screen(s) @@ -1229,7 +1231,7 @@ #endif // Scroll a longer status message into view - //#define STATUS_MESSAGE_SCROLLING + #define STATUS_MESSAGE_SCROLLING // On the Info Screen, display XY with one decimal place when possible //#define LCD_DECIMAL_SMALL_XY @@ -1320,7 +1322,7 @@ #define PLR_ENABLED_DEFAULT false // Power Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) //#define BACKUP_POWER_SUPPLY // Backup power / UPS to move the steppers on power loss //#define POWER_LOSS_ZRAISE 2 // (mm) Z axis raise on resume (on power loss with UPS) - //#define POWER_LOSS_PIN 44 // Pin to detect power loss. Set to -1 to disable default pin on boards without module. + //#define POWER_LOSS_PIN 28 // Pin to detect power loss. Set to -1 to disable default pin on boards without module. //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss //#define POWER_LOSS_PULLUP // Set pullup / pulldown as appropriate for your sensor //#define POWER_LOSS_PULLDOWN @@ -1368,8 +1370,8 @@ #define SDSORT_LIMIT 40 // Maximum number of sorted items (10-256). Costs 27 bytes each. #define FOLDER_SORTING -1 // -1=above 0=none 1=below #define SDSORT_GCODE false // Allow turning sorting on/off with LCD and M34 G-code. - #define SDSORT_USES_RAM false // Pre-allocate a static array for faster pre-sorting. - #define SDSORT_USES_STACK false // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.) + #define SDSORT_USES_RAM true // Pre-allocate a static array for faster pre-sorting. + #define SDSORT_USES_STACK true // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.) #define SDSORT_CACHE_NAMES false // Keep sorted items in RAM longer for speedy performance. Most expensive option. #define SDSORT_DYNAMIC_RAM false // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use! #define SDSORT_CACHE_VFATS 2 // Maximum number of 13-byte VFAT entries to use for sorting. @@ -1790,7 +1792,7 @@ * * Warning: Does not respect endstops! */ -//#define BABYSTEPPING +#define BABYSTEPPING #if ENABLED(BABYSTEPPING) //#define INTEGRATED_BABYSTEPPING // EXPERIMENTAL integration of babystepping into the Stepper ISR //#define BABYSTEP_WITHOUT_HOMING @@ -2311,14 +2313,14 @@ * * Enable PARK_HEAD_ON_PAUSE to add the G-code M125 Pause and Park. */ -//#define ADVANCED_PAUSE_FEATURE +#define ADVANCED_PAUSE_FEATURE #if ENABLED(ADVANCED_PAUSE_FEATURE) #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. - #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. + #define PAUSE_PARK_RETRACT_LENGTH 4 // (mm) Initial retract. // This short retract is done immediately, before parking the nozzle. #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast. #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload. + #define FILAMENT_CHANGE_UNLOAD_LENGTH 0 // (mm) The length of filament for a complete unload. // For Bowden, the full length of the tube and nozzle. // For direct drive, the full length of the nozzle. // Set to 0 for manual unloading. diff --git a/config/examples/ADIMLab/Gantry v2/Configuration.h b/config/examples/ADIMLab/Gantry v2/Configuration.h index 78c2dc9160..b11fb1e1ec 100644 --- a/config/examples/ADIMLab/Gantry v2/Configuration.h +++ b/config/examples/ADIMLab/Gantry v2/Configuration.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "ADIMLab/Gantry v2" + /** * Configuration.h * @@ -69,7 +71,7 @@ // @section info // Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes. +#define STRING_CONFIG_H_AUTHOR "(ETE-Design, Gantry v2)" // Who made the changes. //#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) /** @@ -87,7 +89,7 @@ #define SHOW_BOOTSCREEN // Show the bitmap in Marlin/_Bootscreen.h on startup. -//#define SHOW_CUSTOM_BOOTSCREEN +#define SHOW_CUSTOM_BOOTSCREEN // Show the bitmap in Marlin/_Statusscreen.h on the status screen. //#define CUSTOM_STATUS_SCREEN_IMAGE @@ -134,11 +136,11 @@ // Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_RAMPS_14_EFB + #define MOTHERBOARD BOARD_HJC2560C_REV2 #endif // Name displayed in the LCD "Ready" message and Info menu -//#define CUSTOM_MACHINE_NAME "3D Printer" +#define CUSTOM_MACHINE_NAME "ADIMLab Gantry v2" // Printer's unique ID, used by some programs to differentiate between machines. // Choose your own or use a service like https://www.uuidgenerator.net/version4 @@ -424,7 +426,7 @@ #define TEMP_SENSOR_5 0 #define TEMP_SENSOR_6 0 #define TEMP_SENSOR_7 0 -#define TEMP_SENSOR_BED 0 +#define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 #define TEMP_SENSOR_COOLER 0 @@ -717,13 +719,13 @@ #endif // Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. +#define X_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Y_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Z_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. #define X_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. #define Y_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. #define Z_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_PROBE_ENDSTOP_INVERTING false // Set to true to invert the logic of the probe. +#define Z_MIN_PROBE_ENDSTOP_INVERTING true // Set to true to invert the logic of the probe. /** * Stepper Drivers @@ -806,7 +808,7 @@ * Override with M92 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 500 } +#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 4000, 100 } /** * Default Max Feed Rate (mm/s) @@ -906,7 +908,7 @@ * The probe replaces the Z-MIN endstop and is used for Z homing. * (Automatically enables USE_PROBE_FOR_Z_HOMING.) */ -#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN +//#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN // Force the use of the probe for Z-axis homing //#define USE_PROBE_FOR_Z_HOMING @@ -1190,7 +1192,7 @@ // @section machine // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR false +#define INVERT_X_DIR true #define INVERT_Y_DIR true #define INVERT_Z_DIR false @@ -1232,16 +1234,16 @@ // @section machine // The size of the printable area -#define X_BED_SIZE 200 -#define Y_BED_SIZE 200 +#define X_BED_SIZE 310 +#define Y_BED_SIZE 310 // Travel limits (mm) after homing, corresponding to endstop positions. -#define X_MIN_POS 0 -#define Y_MIN_POS 0 -#define Z_MIN_POS 0 +#define X_MIN_POS -5 +#define Y_MIN_POS -10 +#define Z_MIN_POS -3 #define X_MAX_POS X_BED_SIZE #define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 200 +#define Z_MAX_POS 410 /** * Software Endstops @@ -1253,7 +1255,7 @@ */ // Min software endstops constrain movement within minimum coordinate bounds -#define MIN_SOFTWARE_ENDSTOPS +//#define MIN_SOFTWARE_ENDSTOPS #if ENABLED(MIN_SOFTWARE_ENDSTOPS) #define MIN_SOFTWARE_ENDSTOP_X #define MIN_SOFTWARE_ENDSTOP_Y @@ -1261,7 +1263,7 @@ #endif // Max software endstops constrain movement within maximum coordinate bounds -#define MAX_SOFTWARE_ENDSTOPS +//#define MAX_SOFTWARE_ENDSTOPS #if ENABLED(MAX_SOFTWARE_ENDSTOPS) #define MAX_SOFTWARE_ENDSTOP_X #define MAX_SOFTWARE_ENDSTOP_Y @@ -1285,10 +1287,11 @@ * RAMPS-based boards use SERVO3_PIN for the first runout sensor. * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. */ -//#define FILAMENT_RUNOUT_SENSOR +#define FILAMENT_RUNOUT_SENSOR #if ENABLED(FILAMENT_RUNOUT_SENSOR) #define FIL_RUNOUT_ENABLED_DEFAULT true // Enable the sensor on startup. Override with M412 followed by M500. #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. + #define FIL_RUNOUT_PIN 24 #define FIL_RUNOUT_STATE LOW // Pin state indicating that filament is NOT present. #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. @@ -1672,7 +1675,7 @@ * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) */ -//#define EEPROM_SETTINGS // Persistent storage with M500 and M501 +#define EEPROM_SETTINGS // Persistent storage with M500 and M501 //#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. #define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load @@ -1728,7 +1731,7 @@ * P1 Raise the nozzle always to Z-park height. * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. */ -//#define NOZZLE_PARK_FEATURE +#define NOZZLE_PARK_FEATURE #if ENABLED(NOZZLE_PARK_FEATURE) // Specify a park position as { X, Y, Z_raise } @@ -1736,7 +1739,7 @@ //#define NOZZLE_PARK_X_ONLY // X move only is required to park //#define NOZZLE_PARK_Y_ONLY // Y move only is required to park #define NOZZLE_PARK_Z_RAISE_MIN 2 // (mm) Always raise Z by at least this distance - #define NOZZLE_PARK_XY_FEEDRATE 100 // (mm/s) X and Y axes feedrate (also used for delta Z axis) + #define NOZZLE_PARK_XY_FEEDRATE 60 // (mm/s) X and Y axes feedrate (also used for delta Z axis) #define NOZZLE_PARK_Z_FEEDRATE 5 // (mm/s) Z axis feedrate (not used for delta printers) #endif @@ -1936,14 +1939,14 @@ * SD Card support is disabled by default. If your controller has an SD slot, * you must uncomment the following option or it won't work. */ -//#define SDSUPPORT +#define SDSUPPORT /** * SD CARD: ENABLE CRC * * Use CRC checks and retries on the SD communication. */ -//#define SD_CHECK_AND_RETRY +#define SD_CHECK_AND_RETRY /** * LCD Menu Items @@ -1983,7 +1986,7 @@ // // Set this option if CLOCKWISE causes values to DECREASE // -//#define REVERSE_ENCODER_DIRECTION +#define REVERSE_ENCODER_DIRECTION // // This option reverses the encoder direction for navigating LCD menus. @@ -1991,7 +1994,7 @@ // If CLOCKWISE normally moves DOWN this makes it go UP. // If CLOCKWISE normally moves UP this makes it go DOWN. // -//#define REVERSE_MENU_DIRECTION +#define REVERSE_MENU_DIRECTION // // This option reverses the encoder direction for Select Screen. @@ -2195,7 +2198,7 @@ // RepRapDiscount FULL GRAPHIC Smart Controller // https://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller // -//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER +#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER // // K.3D Full Graphic Smart Controller diff --git a/config/examples/ADIMLab/Gantry v2/Configuration_adv.h b/config/examples/ADIMLab/Gantry v2/Configuration_adv.h index 5335fa012a..336accf433 100644 --- a/config/examples/ADIMLab/Gantry v2/Configuration_adv.h +++ b/config/examples/ADIMLab/Gantry v2/Configuration_adv.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "ADIMLab/Gantry v2" + /** * Configuration_adv.h * @@ -573,9 +575,9 @@ /** * M355 Case Light on-off / brightness */ -//#define CASE_LIGHT_ENABLE +#define CASE_LIGHT_ENABLE #if ENABLED(CASE_LIGHT_ENABLE) - //#define CASE_LIGHT_PIN 4 // Override the default pin if needed + #define CASE_LIGHT_PIN 8 // Override the default pin if needed #define INVERT_CASE_LIGHT false // Set true if Case Light is ON when pin is LOW #define CASE_LIGHT_DEFAULT_ON true // Set default power-up state on #define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // Set default power-up brightness (0-255, requires PWM pin) @@ -867,7 +869,7 @@ // On a 300mm bed a 5% grade would give a misalignment of ~1.5cm #define G34_MAX_GRADE 5 // (%) Maximum incline that G34 will handle - #define Z_STEPPER_ALIGN_ITERATIONS 5 // Number of iterations to apply during alignment + #define Z_STEPPER_ALIGN_ITERATIONS 3 // Number of iterations to apply during alignment #define Z_STEPPER_ALIGN_ACC 0.02 // Stop iterating early if the accuracy is better than this #define RESTORE_LEVELING_AFTER_G34 // Restore leveling after G34 is done? // After G34, re-home Z (G28 Z) or just calculate it from the last probe heights? @@ -1790,7 +1792,7 @@ * * Warning: Does not respect endstops! */ -//#define BABYSTEPPING +#define BABYSTEPPING #if ENABLED(BABYSTEPPING) //#define INTEGRATED_BABYSTEPPING // EXPERIMENTAL integration of babystepping into the Stepper ISR //#define BABYSTEP_WITHOUT_HOMING @@ -2311,7 +2313,7 @@ * * Enable PARK_HEAD_ON_PAUSE to add the G-code M125 Pause and Park. */ -//#define ADVANCED_PAUSE_FEATURE +#define ADVANCED_PAUSE_FEATURE #if ENABLED(ADVANCED_PAUSE_FEATURE) #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. diff --git a/config/examples/AlephObjects/TAZ4/Configuration.h b/config/examples/AlephObjects/TAZ4/Configuration.h index 78c2dc9160..a7150f6803 100644 --- a/config/examples/AlephObjects/TAZ4/Configuration.h +++ b/config/examples/AlephObjects/TAZ4/Configuration.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "AlephObjects/TAZ4" + /** * Configuration.h * @@ -69,7 +71,7 @@ // @section info // Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes. +#define STRING_CONFIG_H_AUTHOR "(Aleph Objects Inc, TAZ)" // Who made the changes. //#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) /** @@ -134,11 +136,11 @@ // Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_RAMPS_14_EFB + #define MOTHERBOARD BOARD_RAMBO #endif // Name displayed in the LCD "Ready" message and Info menu -//#define CUSTOM_MACHINE_NAME "3D Printer" +#define CUSTOM_MACHINE_NAME "TAZ" // Printer's unique ID, used by some programs to differentiate between machines. // Choose your own or use a service like https://www.uuidgenerator.net/version4 @@ -151,7 +153,7 @@ #define EXTRUDERS 1 // Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc. -#define DEFAULT_NOMINAL_FILAMENT_DIA 1.75 +#define DEFAULT_NOMINAL_FILAMENT_DIA 3.0 // For Cyclops or any "multi-extruder" that shares a single nozzle. //#define SINGLENOZZLE @@ -318,7 +320,7 @@ * Enable and connect the power supply to the PS_ON_PIN. * Specify whether the power supply is active HIGH or active LOW. */ -//#define PSU_CONTROL +#define PSU_CONTROL //#define PSU_NAME "Power Supply" #if ENABLED(PSU_CONTROL) @@ -416,7 +418,7 @@ * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. */ -#define TEMP_SENSOR_0 1 +#define TEMP_SENSOR_0 7 #define TEMP_SENSOR_1 0 #define TEMP_SENSOR_2 0 #define TEMP_SENSOR_3 0 @@ -424,7 +426,7 @@ #define TEMP_SENSOR_5 0 #define TEMP_SENSOR_6 0 #define TEMP_SENSOR_7 0 -#define TEMP_SENSOR_BED 0 +#define TEMP_SENSOR_BED 7 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 #define TEMP_SENSOR_COOLER 0 @@ -448,7 +450,7 @@ #define TEMP_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer #define TEMP_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target -#define TEMP_BED_RESIDENCY_TIME 10 // (seconds) Time to wait for bed to "settle" in M190 +#define TEMP_BED_RESIDENCY_TIME 0 // (seconds) Time to wait for bed to "settle" in M190 #define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer #define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target @@ -472,14 +474,14 @@ // Above this temperature the heater will be switched off. // This can protect components from overheating, but NOT from shorts and failures. // (Use MINTEMP for thermistor short/failure protection.) -#define HEATER_0_MAXTEMP 275 -#define HEATER_1_MAXTEMP 275 -#define HEATER_2_MAXTEMP 275 -#define HEATER_3_MAXTEMP 275 -#define HEATER_4_MAXTEMP 275 -#define HEATER_5_MAXTEMP 275 -#define HEATER_6_MAXTEMP 275 -#define HEATER_7_MAXTEMP 275 +#define HEATER_0_MAXTEMP 250 +#define HEATER_1_MAXTEMP 250 +#define HEATER_2_MAXTEMP 250 +#define HEATER_3_MAXTEMP 250 +#define HEATER_4_MAXTEMP 250 +#define HEATER_5_MAXTEMP 250 +#define HEATER_6_MAXTEMP 250 +#define HEATER_7_MAXTEMP 250 #define BED_MAXTEMP 150 #define CHAMBER_MAXTEMP 60 @@ -500,8 +502,8 @@ // Comment the following line to disable PID and enable bang-bang. #define PIDTEMP -#define BANG_MAX 255 // Limits current to nozzle while in bang-bang mode; 255=full current -#define PID_MAX BANG_MAX // Limits current to nozzle while PID is active (see PID_FUNCTIONAL_RANGE below); 255=full current +#define BANG_MAX 70 // Limits current to nozzle while in bang-bang mode; 255=full current +#define PID_MAX 74 // Limits current to nozzle while PID is active (see PID_FUNCTIONAL_RANGE below); 255=full current #define PID_K1 0.95 // Smoothing factor within any PID loop #if ENABLED(PIDTEMP) @@ -513,13 +515,19 @@ #if ENABLED(PID_PARAMS_PER_HOTEND) // Specify between 1 and HOTENDS values per array. // If fewer than EXTRUDER values are provided, the last element will be repeated. - #define DEFAULT_Kp_LIST { 22.20, 22.20 } - #define DEFAULT_Ki_LIST { 1.08, 1.08 } - #define DEFAULT_Kd_LIST { 114.00, 114.00 } + #define DEFAULT_Kp_LIST { 6.0, 6.0 } + #define DEFAULT_Ki_LIST { 0.3, 0.3 } + #define DEFAULT_Kd_LIST { 125.0, 125.0 } #else - #define DEFAULT_Kp 22.20 - #define DEFAULT_Ki 1.08 - #define DEFAULT_Kd 114.00 + // Buda 2.0 on 24V + #define DEFAULT_Kp 6.0 + #define DEFAULT_Ki 0.3 + #define DEFAULT_Kd 125.0 + + // Buda 2.0 on 12V + //#define DEFAULT_Kp 22.20 + //#define DEFAULT_Ki 1.01 + //#define DEFAULT_Kd 114.00 #endif #endif // PIDTEMP @@ -540,7 +548,7 @@ * heater. If your configuration is significantly different than this and you don't understand * the issues involved, don't use bed PID until someone else verifies that your hardware works. */ -//#define PIDTEMPBED +#define PIDTEMPBED //#define BED_LIMIT_SWITCHING @@ -550,17 +558,22 @@ * When set to any value below 255, enables a form of PWM to the bed that acts like a divider * so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED) */ -#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current +#define MAX_BED_POWER 206 // limits duty cycle to bed; 255=full current #if ENABLED(PIDTEMPBED) //#define MIN_BED_POWER 0 //#define PID_BED_DEBUG // Sends debug data to the serial port. - // 120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - // from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) - #define DEFAULT_bedKp 10.00 - #define DEFAULT_bedKi .023 - #define DEFAULT_bedKd 305.4 + // 24V 360W silicone heater from NPH on 3mm borosilicate (TAZ 2.2+) + #define DEFAULT_bedKp 20 + #define DEFAULT_bedKi 5 + #define DEFAULT_bedKd 275 + + // 12v 400W silicone heater from QUDB into 3mm borosilicate (TAZ 1.0+) + // from pidautotune + //#define DEFAULT_bedKp 650 + //#define DEFAULT_bedKi 60 + //#define DEFAULT_bedKd 1800 // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. #endif // PIDTEMPBED @@ -613,7 +626,7 @@ //#define PID_DEBUG // Sends debug data to the serial port. Use 'M303 D' to toggle activation. //#define PID_OPENLOOP // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX //#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay - #define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature + #define PID_FUNCTIONAL_RANGE 16 // If the temperature difference between the target temperature and the actual temperature // is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max. #endif @@ -717,13 +730,13 @@ #endif // Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define X_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_PROBE_ENDSTOP_INVERTING false // Set to true to invert the logic of the probe. +#define X_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Y_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Z_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define X_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Y_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Z_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Z_MIN_PROBE_ENDSTOP_INVERTING true // Set to true to invert the logic of the probe. /** * Stepper Drivers @@ -806,14 +819,14 @@ * Override with M92 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 500 } +#define DEFAULT_AXIS_STEPS_PER_UNIT { 100.5, 100.5, 400, 850 } /** * Default Max Feed Rate (mm/s) * Override with M203 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 } +#define DEFAULT_MAX_FEEDRATE { 800, 800, 8, 50 } //#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 #if ENABLED(LIMITED_MAX_FR_EDITING) @@ -826,7 +839,7 @@ * Override with M201 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 } +#define DEFAULT_MAX_ACCELERATION { 9000, 9000, 100, 10000 } //#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 #if ENABLED(LIMITED_MAX_ACCEL_EDITING) @@ -841,7 +854,7 @@ * M204 R Retract Acceleration * M204 T Travel Acceleration */ -#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves +#define DEFAULT_ACCELERATION 500 // X, Y, Z and E acceleration for printing moves #define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts #define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves @@ -855,8 +868,8 @@ */ //#define CLASSIC_JERK #if ENABLED(CLASSIC_JERK) - #define DEFAULT_XJERK 10.0 - #define DEFAULT_YJERK 10.0 + #define DEFAULT_XJERK 8.0 + #define DEFAULT_YJERK 8.0 #define DEFAULT_ZJERK 0.3 //#define TRAVEL_EXTRA_XYJERK 0.0 // Additional jerk allowance for all travel moves @@ -867,7 +880,7 @@ #endif #endif -#define DEFAULT_EJERK 5.0 // May be used by Linear Advance +#define DEFAULT_EJERK 10.0 // May be used by Linear Advance /** * Junction Deviation Factor @@ -877,7 +890,7 @@ * https://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html */ #if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.013 // (mm) Distance from real junction edge + #define JUNCTION_DEVIATION_MM 0.051 // (mm) Distance from real junction edge #define JD_HANDLE_SMALL_SEGMENTS // Use curvature estimation instead of just the junction angle // for small segments (< 1mm) with large junction angles (> 135°). #endif @@ -946,7 +959,7 @@ * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. * (e.g., an inductive probe or a nozzle-based probe-switch.) */ -//#define FIX_MOUNTED_PROBE +#define FIX_MOUNTED_PROBE /** * Use the nozzle as the probe, as with a conductive @@ -1055,7 +1068,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +#define NOZZLE_TO_PROBE_OFFSET { -25, -29, -12.35 } // Most probes should stay away from the edges of the bed, but // with NOZZLE_AS_PROBE this can be negative for a wider probing area. @@ -1065,7 +1078,7 @@ #define XY_PROBE_FEEDRATE (133*60) // Feedrate (mm/min) for the first approach when double-probing (MULTIPLE_PROBING == 2) -#define Z_PROBE_FEEDRATE_FAST (4*60) +#define Z_PROBE_FEEDRATE_FAST (8*60) // Feedrate (mm/min) for the "accurate" probe of each point #define Z_PROBE_FEEDRATE_SLOW (Z_PROBE_FEEDRATE_FAST / 2) @@ -1123,7 +1136,7 @@ * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. */ -#define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow +#define Z_CLEARANCE_DEPLOY_PROBE 15 // Z Clearance for Deploy/Stow #define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points #define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes //#define Z_AFTER_PROBING 5 // Z position after probing is done @@ -1197,14 +1210,14 @@ // @section extruder // For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR false -#define INVERT_E1_DIR false -#define INVERT_E2_DIR false -#define INVERT_E3_DIR false -#define INVERT_E4_DIR false -#define INVERT_E5_DIR false -#define INVERT_E6_DIR false -#define INVERT_E7_DIR false +#define INVERT_E0_DIR true +#define INVERT_E1_DIR true +#define INVERT_E2_DIR true +#define INVERT_E3_DIR true +#define INVERT_E4_DIR true +#define INVERT_E5_DIR true +#define INVERT_E6_DIR true +#define INVERT_E7_DIR true // @section homing @@ -1232,8 +1245,8 @@ // @section machine // The size of the printable area -#define X_BED_SIZE 200 -#define Y_BED_SIZE 200 +#define X_BED_SIZE 298 +#define Y_BED_SIZE 275 // Travel limits (mm) after homing, corresponding to endstop positions. #define X_MIN_POS 0 @@ -1241,7 +1254,7 @@ #define Z_MIN_POS 0 #define X_MAX_POS X_BED_SIZE #define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 200 +#define Z_MAX_POS 250 /** * Software Endstops @@ -1587,7 +1600,7 @@ // - Move the Z probe (or nozzle) to a defined XY point before Z Homing. // - Prevent Z homing when the Z probe is outside bed area. // -//#define Z_SAFE_HOMING +#define Z_SAFE_HOMING #if ENABLED(Z_SAFE_HOMING) #define Z_SAFE_HOMING_X_POINT X_CENTER // X point for Z homing @@ -1595,7 +1608,7 @@ #endif // Homing speeds (mm/min) -#define HOMING_FEEDRATE_MM_M { (50*60), (50*60), (4*60) } +#define HOMING_FEEDRATE_MM_M { (50*60), (50*60), (8*60) } // Validate that endstops are triggered on homing moves #define VALIDATE_HOMING_ENDSTOPS @@ -1712,7 +1725,7 @@ #define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 #define PREHEAT_2_LABEL "ABS" -#define PREHEAT_2_TEMP_HOTEND 240 +#define PREHEAT_2_TEMP_HOTEND 230 #define PREHEAT_2_TEMP_BED 110 #define PREHEAT_2_TEMP_CHAMBER 35 #define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 @@ -1960,13 +1973,13 @@ // This option overrides the default number of encoder pulses needed to // produce one step. Should be increased for high-resolution encoders. // -//#define ENCODER_PULSES_PER_STEP 4 +#define ENCODER_PULSES_PER_STEP 2 // // Use this option to override the number of step signals required to // move between next/prev menu items. // -//#define ENCODER_STEPS_PER_MENU_ITEM 1 +#define ENCODER_STEPS_PER_MENU_ITEM 1 /** * Encoder Direction Options @@ -2195,7 +2208,7 @@ // RepRapDiscount FULL GRAPHIC Smart Controller // https://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller // -//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER +#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER // // K.3D Full Graphic Smart Controller @@ -2613,7 +2626,7 @@ //#define NUM_M106_FANS 1 // Increase the FAN PWM frequency. Removes the PWM noise but increases heating in the FET/Arduino -//#define FAST_PWM_FAN +#define FAST_PWM_FAN // Use software PWM to drive the fan, as for the heaters. This uses a very low frequency // which is not as annoying as with the hardware PWM. On the other hand, if this frequency diff --git a/config/examples/AlephObjects/TAZ4/Configuration_adv.h b/config/examples/AlephObjects/TAZ4/Configuration_adv.h index 5335fa012a..9f95f97e1c 100644 --- a/config/examples/AlephObjects/TAZ4/Configuration_adv.h +++ b/config/examples/AlephObjects/TAZ4/Configuration_adv.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "AlephObjects/TAZ4" + /** * Configuration_adv.h * @@ -461,13 +463,13 @@ * The fan turns on automatically whenever any driver is enabled and turns * off (or reduces to idle speed) shortly after drivers are turned off. */ -//#define USE_CONTROLLER_FAN +#define USE_CONTROLLER_FAN #if ENABLED(USE_CONTROLLER_FAN) - //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan + #define CONTROLLER_FAN_PIN 2 // Set a custom pin for the controller fan //#define CONTROLLER_FAN_USE_Z_ONLY // With this option only the Z axis is considered //#define CONTROLLER_FAN_IGNORE_Z // Ignore Z stepper. Useful when stepper timeout is disabled. #define CONTROLLERFAN_SPEED_MIN 0 // (0-255) Minimum speed. (If set below this value the fan is turned off.) - #define CONTROLLERFAN_SPEED_ACTIVE 255 // (0-255) Active speed, used when any motor is enabled + #define CONTROLLERFAN_SPEED_ACTIVE 130 // (0-255) Active speed, used when any motor is enabled #define CONTROLLERFAN_SPEED_IDLE 0 // (0-255) Idle speed, used when motors are disabled #define CONTROLLERFAN_IDLE_TIME 60 // (seconds) Extra time to keep the fan running after disabling motors //#define CONTROLLER_FAN_EDITABLE // Enable M710 configurable settings @@ -736,12 +738,12 @@ //#define SENSORLESS_BACKOFF_MM { 2, 2 } // (mm) Backoff from endstops before sensorless homing -#define HOMING_BUMP_MM { 5, 5, 2 } // (mm) Backoff from endstops after first bump +#define HOMING_BUMP_MM { 5, 5, 4 } // (mm) Backoff from endstops after first bump #define HOMING_BUMP_DIVISOR { 2, 2, 4 } // Re-Bump Speed Divisor (Divides the Homing Feedrate) //#define HOMING_BACKOFF_POST_MM { 2, 2, 2 } // (mm) Backoff from endstops after homing -//#define QUICK_HOME // If G28 contains XY do a diagonal move first +#define QUICK_HOME // If G28 contains XY do a diagonal move first //#define HOME_Y_BEFORE_X // If G28 contains XY home Y before X //#define HOME_Z_FIRST // Home Z first. Requires a Z-MIN endstop (not a probe). //#define CODEPENDENT_XY_HOMING // If X/Y can't home without homing Y/X first @@ -867,7 +869,7 @@ // On a 300mm bed a 5% grade would give a misalignment of ~1.5cm #define G34_MAX_GRADE 5 // (%) Maximum incline that G34 will handle - #define Z_STEPPER_ALIGN_ITERATIONS 5 // Number of iterations to apply during alignment + #define Z_STEPPER_ALIGN_ITERATIONS 3 // Number of iterations to apply during alignment #define Z_STEPPER_ALIGN_ACC 0.02 // Stop iterating early if the accuracy is better than this #define RESTORE_LEVELING_AFTER_G34 // Restore leveling after G34 is done? // After G34, re-home Z (G28 Z) or just calculate it from the last probe heights? @@ -925,7 +927,7 @@ * Set DISABLE_INACTIVE_? 'true' to shut down axis steppers after an idle period. * The Deactive Time can be overridden with M18 and M84. Set to 0 for No Timeout. */ -#define DEFAULT_STEPPER_DEACTIVE_TIME 120 +#define DEFAULT_STEPPER_DEACTIVE_TIME 60 #define DISABLE_INACTIVE_X true #define DISABLE_INACTIVE_Y true #define DISABLE_INACTIVE_Z true // Set 'false' if the nozzle could fall onto your printed part! @@ -1073,7 +1075,7 @@ //#define MICROSTEP32 HIGH,LOW,HIGH // Microstep settings (Requires a board with pins named X_MS1, X_MS2, etc.) -#define MICROSTEP_MODES { 16, 16, 16, 16, 16, 16 } // [1,2,4,8,16] +#define MICROSTEP_MODES { 16, 16, 4, 16, 16, 16 } // [1,2,4,8,16] /** * @section stepper motor current @@ -3562,12 +3564,12 @@ #define MAIN_MENU_ITEM_2_GCODE "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND) //#define MAIN_MENU_ITEM_2_CONFIRM - //#define MAIN_MENU_ITEM_3_DESC "Preheat for " PREHEAT_2_LABEL - //#define MAIN_MENU_ITEM_3_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) + #define MAIN_MENU_ITEM_3_DESC "Preheat for " PREHEAT_2_LABEL + #define MAIN_MENU_ITEM_3_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) //#define MAIN_MENU_ITEM_3_CONFIRM - //#define MAIN_MENU_ITEM_4_DESC "Heat Bed/Home/Level" - //#define MAIN_MENU_ITEM_4_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29" + #define MAIN_MENU_ITEM_4_DESC "Heat Bed/Home/Level" + #define MAIN_MENU_ITEM_4_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29" //#define MAIN_MENU_ITEM_4_CONFIRM //#define MAIN_MENU_ITEM_5_DESC "Home & Info" diff --git a/config/examples/Alfawise/U20-bltouch/Configuration.h b/config/examples/Alfawise/U20-bltouch/Configuration.h index 78c2dc9160..c1fddd584c 100644 --- a/config/examples/Alfawise/U20-bltouch/Configuration.h +++ b/config/examples/Alfawise/U20-bltouch/Configuration.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Alfawise/U20-bltouch" + /** * Configuration.h * @@ -66,10 +68,35 @@ // //=========================================================================== +//=========================================================================== +//============================= Alfawise Printer ============================ +//=========================================================================== + +// Forum link to help with a tutorial, in French! : +// https://www.lesimprimantes3d.fr/forum/topic/18260-alfawise-u20x-u30-marlin-2x-firmware-alternatif/ +// +// 1 - Select your Alfawise U30 or U20 or U20+ printer (NO MORE REQUIRED HERE) +// and the touchscreen version, either 1.1 or 1.2. Most recent in France are v1.2 (blue pcb) +// These defines are set in platformio.ini build parameters, sample for U20 -DU20 -DTS_V12 +// U20_PLUS was not tested, as we do not have a printer to test. Print bed PID settings MUST be tuned for it. + +// Valid platformio.ini submodel values are U20_PLUS U20 U30 LK1 LK2 LK4 + +// Valid platformio.ini touchscreens are TS_V11 TS_V12 TS_V19 + +// 2 - Select the screen controller type. Most common is ILI9341 - First option. If your screen remains white, +// Try the alternate setting - this should enable ST7789V or ILI9328. For other LCDs... code is needed +// with the proper boot sequence to be developped. + +#define LCD_READ_ID 0xD3 // Read display identification information in reg ID4 0xD3, for ILI9341 screens +//#define LCD_READ_ID 0x04 // Read display identification information in reg ID1 0x04 - ST7789V / ILI9328 or others + +//=========================================================================== + // @section info // Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes. +#define STRING_CONFIG_H_AUTHOR "Hobi, tpruvot" // Who made the changes. //#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) /** @@ -90,7 +117,7 @@ //#define SHOW_CUSTOM_BOOTSCREEN // Show the bitmap in Marlin/_Statusscreen.h on the status screen. -//#define CUSTOM_STATUS_SCREEN_IMAGE +#define CUSTOM_STATUS_SCREEN_IMAGE // @section machine @@ -102,14 +129,14 @@ * * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] */ -#define SERIAL_PORT 0 +#define SERIAL_PORT 1 /** * Select a secondary serial port on the board to use for communication with the host. * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] */ -//#define SERIAL_PORT_2 -1 +//#define SERIAL_PORT_2 2 /** * Select a third serial port on the board to use for communication with the host. @@ -134,11 +161,24 @@ // Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_RAMPS_14_EFB + #define MOTHERBOARD BOARD_LONGER3D_LK #endif // Name displayed in the LCD "Ready" message and Info menu //#define CUSTOM_MACHINE_NAME "3D Printer" +#ifdef U20 +#define CUSTOM_MACHINE_NAME "Alfawise U20" +#elif defined(U30) +#define CUSTOM_MACHINE_NAME "Alfawise U30" +#elif defined(U20_PLUS) +#define CUSTOM_MACHINE_NAME "Alfawise U20+" +#elif defined(LK1) +#define CUSTOM_MACHINE_NAME "Longer3D LK1" +#elif defined(LK2) +#define CUSTOM_MACHINE_NAME "Longer3D LK2" +#elif defined(LK4) +#define CUSTOM_MACHINE_NAME "Longer3D LK4" +#endif // Printer's unique ID, used by some programs to differentiate between machines. // Choose your own or use a service like https://www.uuidgenerator.net/version4 @@ -319,7 +359,7 @@ * Specify whether the power supply is active HIGH or active LOW. */ //#define PSU_CONTROL -//#define PSU_NAME "Power Supply" +#define PSU_NAME "360W 24V/15A" #if ENABLED(PSU_CONTROL) #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box @@ -424,7 +464,7 @@ #define TEMP_SENSOR_5 0 #define TEMP_SENSOR_6 0 #define TEMP_SENSOR_7 0 -#define TEMP_SENSOR_BED 0 +#define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 #define TEMP_SENSOR_COOLER 0 @@ -510,16 +550,20 @@ //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) // Set/get with gcode: M301 E[extruder number, 0-2] + // Alfawise U30/U20 + // Please refine the PID settings for your own machine to avoid the E1 hotend error. These a basic settings allowing first startups. + // Use the command M303 E0 S200 C8 each time you make any changes to your extruder + #if ENABLED(PID_PARAMS_PER_HOTEND) // Specify between 1 and HOTENDS values per array. // If fewer than EXTRUDER values are provided, the last element will be repeated. - #define DEFAULT_Kp_LIST { 22.20, 22.20 } - #define DEFAULT_Ki_LIST { 1.08, 1.08 } - #define DEFAULT_Kd_LIST { 114.00, 114.00 } + #define DEFAULT_Kp_LIST { 17.22, 17.22 } + #define DEFAULT_Ki_LIST { 1.00, 1.00 } + #define DEFAULT_Kd_LIST { 74.22, 74.22 } #else - #define DEFAULT_Kp 22.20 - #define DEFAULT_Ki 1.08 - #define DEFAULT_Kd 114.00 + #define DEFAULT_Kp 17.22 + #define DEFAULT_Ki 1.00 + #define DEFAULT_Kd 74.22 #endif #endif // PIDTEMP @@ -540,7 +584,7 @@ * heater. If your configuration is significantly different than this and you don't understand * the issues involved, don't use bed PID until someone else verifies that your hardware works. */ -//#define PIDTEMPBED +#define PIDTEMPBED //#define BED_LIMIT_SWITCHING @@ -556,13 +600,27 @@ //#define MIN_BED_POWER 0 //#define PID_BED_DEBUG // Sends debug data to the serial port. - // 120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - // from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) - #define DEFAULT_bedKp 10.00 - #define DEFAULT_bedKi .023 - #define DEFAULT_bedKd 305.4 + #if defined(U30) || defined(LK2) || defined(LK4) + // From M303 command for Alfawise U30 + #define DEFAULT_bedKp 338.46 + #define DEFAULT_bedKi 63.96 + #define DEFAULT_bedKd 447.78 + #endif + + #if defined(U20) || defined(LK1) + // From M303 command for Alfawise U20 + #define DEFAULT_bedKp 841.68 + #define DEFAULT_bedKi 152.12 + #define DEFAULT_bedKd 1164.25 + #endif + + #ifdef U20_PLUS + // These PID settings MUST be updated + #define DEFAULT_bedKp 841.68 + #define DEFAULT_bedKi 152.12 + #define DEFAULT_bedKd 1164.25 + #endif - // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. #endif // PIDTEMPBED //=========================================================================== @@ -655,7 +713,7 @@ #define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders #define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed -#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber +//#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber #define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling //=========================================================================== @@ -691,7 +749,7 @@ //#define USE_ZMAX_PLUG // Enable pullup for all endstops to prevent a floating state -#define ENDSTOPPULLUPS +//#define ENDSTOPPULLUPS #if DISABLED(ENDSTOPPULLUPS) // Disable ENDSTOPPULLUPS to set pullups individually //#define ENDSTOPPULLUP_XMAX @@ -700,7 +758,7 @@ //#define ENDSTOPPULLUP_XMIN //#define ENDSTOPPULLUP_YMIN //#define ENDSTOPPULLUP_ZMIN - //#define ENDSTOPPULLUP_ZMIN_PROBE + #define ENDSTOPPULLUP_ZMIN_PROBE #endif // Enable pulldown for all endstops to prevent a floating state @@ -717,12 +775,12 @@ #endif // Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define X_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. +#define X_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Y_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Z_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define X_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Y_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Z_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. #define Z_MIN_PROBE_ENDSTOP_INVERTING false // Set to true to invert the logic of the probe. /** @@ -762,7 +820,7 @@ // Enable this feature if all enabled endstop pins are interrupt-capable. // This will remove the need to poll the interrupt pins, saving many CPU cycles. -//#define ENDSTOP_INTERRUPTS_FEATURE +#define ENDSTOP_INTERRUPTS_FEATURE /** * Endstop Noise Threshold @@ -806,18 +864,18 @@ * Override with M92 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 500 } +#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 98 } /** * Default Max Feed Rate (mm/s) * Override with M203 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 } +#define DEFAULT_MAX_FEEDRATE { 200, 200, 100, 25 } -//#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 +#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 #if ENABLED(LIMITED_MAX_FR_EDITING) - #define MAX_FEEDRATE_EDIT_VALUES { 600, 600, 10, 50 } // ...or, set your own edit limits + #define MAX_FEEDRATE_EDIT_VALUES { 250, 250, 200, 50 } // ...or, set your own edit limits #endif /** @@ -826,11 +884,11 @@ * Override with M201 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 } +#define DEFAULT_MAX_ACCELERATION { 200, 200, 100, 3000 } -//#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 +#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 #if ENABLED(LIMITED_MAX_ACCEL_EDITING) - #define MAX_ACCEL_EDIT_VALUES { 6000, 6000, 200, 20000 } // ...or, set your own edit limits + #define MAX_ACCEL_EDIT_VALUES { 600, 600, 400, 6000 } // ...or, set your own edit limits #endif /** @@ -841,9 +899,9 @@ * M204 R Retract Acceleration * M204 T Travel Acceleration */ -#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves +#define DEFAULT_ACCELERATION 200 // X, Y, Z and E acceleration for printing moves +#define DEFAULT_RETRACT_ACCELERATION 500 // E acceleration for retracts +#define DEFAULT_TRAVEL_ACCELERATION 200 // X, Y, Z acceleration for travel (non printing) moves /** * Default Jerk limits (mm/s) @@ -853,15 +911,15 @@ * When changing speed and direction, if the difference is less than the * value set here, it may happen instantaneously. */ -//#define CLASSIC_JERK +#define CLASSIC_JERK #if ENABLED(CLASSIC_JERK) #define DEFAULT_XJERK 10.0 #define DEFAULT_YJERK 10.0 - #define DEFAULT_ZJERK 0.3 + #define DEFAULT_ZJERK 0.4 //#define TRAVEL_EXTRA_XYJERK 0.0 // Additional jerk allowance for all travel moves - //#define LIMITED_JERK_EDITING // Limit edit via M205 or LCD to DEFAULT_aJERK * 2 + #define LIMITED_JERK_EDITING // Limit edit via M205 or LCD to DEFAULT_aJERK * 2 #if ENABLED(LIMITED_JERK_EDITING) #define MAX_JERK_EDIT_VALUES { 20, 20, 0.6, 10 } // ...or, set your own edit limits #endif @@ -877,7 +935,7 @@ * https://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html */ #if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.013 // (mm) Distance from real junction edge + #define JUNCTION_DEVIATION_MM 0.10 // (mm) Distance from real junction edge #define JD_HANDLE_SMALL_SEGMENTS // Use curvature estimation instead of just the junction angle // for small segments (< 1mm) with large junction angles (> 135°). #endif @@ -963,7 +1021,7 @@ /** * The BLTouch probe uses a Hall effect sensor and emulates a servo. */ -//#define BLTOUCH +#define BLTOUCH /** * Touch-MI Probe by hotends.fr @@ -1055,17 +1113,17 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +#define NOZZLE_TO_PROBE_OFFSET { -35, -6, -0.5 } // Most probes should stay away from the edges of the bed, but // with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed (mm/min) between probes -#define XY_PROBE_FEEDRATE (133*60) +#define XY_PROBE_FEEDRATE (80*60) // Feedrate (mm/min) for the first approach when double-probing (MULTIPLE_PROBING == 2) -#define Z_PROBE_FEEDRATE_FAST (4*60) +#define Z_PROBE_FEEDRATE_FAST (7*60) // Feedrate (mm/min) for the "accurate" probe of each point #define Z_PROBE_FEEDRATE_SLOW (Z_PROBE_FEEDRATE_FAST / 2) @@ -1106,7 +1164,7 @@ * A total of 2 does fast/slow probes with a weighted average. * A total of 3 or more adds more slow probes, taking the average. */ -//#define MULTIPLE_PROBING 2 +#define MULTIPLE_PROBING 2 //#define EXTRA_PROBING 1 /** @@ -1135,7 +1193,7 @@ #define Z_PROBE_OFFSET_RANGE_MAX 20 // Enable the M48 repeatability test to test probe accuracy -//#define Z_MIN_PROBE_REPEATABILITY_TEST +#define Z_MIN_PROBE_REPEATABILITY_TEST // Before deploy/stow pause for user confirmation //#define PAUSE_BEFORE_DEPLOY_STOW @@ -1190,9 +1248,9 @@ // @section machine // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR false -#define INVERT_Y_DIR true -#define INVERT_Z_DIR false +#define INVERT_X_DIR true +#define INVERT_Y_DIR false +#define INVERT_Z_DIR true // @section extruder @@ -1218,7 +1276,7 @@ */ //#define Z_IDLE_HEIGHT Z_HOME_POS -//#define Z_HOMING_HEIGHT 4 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ... +//#define Z_HOMING_HEIGHT 10 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ... // Be sure to have this much clearance over your Z_MAX_POS to prevent grinding. //#define Z_AFTER_HOMING 10 // (mm) Height to move to after homing Z @@ -1231,9 +1289,23 @@ // @section machine -// The size of the printable area -#define X_BED_SIZE 200 -#define Y_BED_SIZE 200 +#if defined(U30) || defined(LK2) || defined(LK4) +#define X_BED_SIZE 220 +#define Y_BED_SIZE 220 +#define Z_MACHINE_MAX 250 +#endif + +#if defined(U20) || defined(LK1) +#define X_BED_SIZE 300 +#define Y_BED_SIZE 300 +#define Z_MACHINE_MAX 400 +#endif + +#ifdef U20_PLUS +#define X_BED_SIZE 400 +#define Y_BED_SIZE 400 +#define Z_MACHINE_MAX 500 +#endif // Travel limits (mm) after homing, corresponding to endstop positions. #define X_MIN_POS 0 @@ -1241,7 +1313,7 @@ #define Z_MIN_POS 0 #define X_MAX_POS X_BED_SIZE #define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 200 +#define Z_MAX_POS Z_MACHINE_MAX /** * Software Endstops @@ -1285,13 +1357,13 @@ * RAMPS-based boards use SERVO3_PIN for the first runout sensor. * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. */ -//#define FILAMENT_RUNOUT_SENSOR +#define FILAMENT_RUNOUT_SENSOR #if ENABLED(FILAMENT_RUNOUT_SENSOR) #define FIL_RUNOUT_ENABLED_DEFAULT true // Enable the sensor on startup. Override with M412 followed by M500. #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. - #define FIL_RUNOUT_STATE LOW // Pin state indicating that filament is NOT present. - #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. + #define FIL_RUNOUT_STATE HIGH // Pin state indicating that filament is NOT present. + //#define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. //#define WATCH_ALL_RUNOUT_SENSORS // Execute runout script on any triggering sensor, not only for the active extruder. // This is automatically enabled for MIXING_EXTRUDERs. @@ -1387,7 +1459,7 @@ */ //#define AUTO_BED_LEVELING_3POINT //#define AUTO_BED_LEVELING_LINEAR -//#define AUTO_BED_LEVELING_BILINEAR +#define AUTO_BED_LEVELING_BILINEAR //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING @@ -1396,7 +1468,7 @@ * these options to restore the prior leveling state or to always enable * leveling immediately after G28. */ -//#define RESTORE_LEVELING_AFTER_G28 +#define RESTORE_LEVELING_AFTER_G28 //#define ENABLE_LEVELING_AFTER_G28 /** @@ -1446,7 +1518,7 @@ #define MESH_TEST_BED_TEMP 60 // (°C) Default bed temperature for G26. #define G26_XY_FEEDRATE 20 // (mm/s) Feedrate for G26 XY moves. #define G26_XY_FEEDRATE_TRAVEL 100 // (mm/s) Feedrate for G26 XY travel moves. - #define G26_RETRACT_MULTIPLIER 1.0 // G26 Q (retraction) used by default between mesh test elements. + #define G26_RETRACT_MULTIPLIER 5.0 // G26 Q (retraction) used by default between mesh test elements. #endif #endif @@ -1454,7 +1526,7 @@ #if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR) // Set the number of grid points per dimension. - #define GRID_MAX_POINTS_X 3 + #define GRID_MAX_POINTS_X 4 #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X // Probe along the Y axis, advancing X after each column @@ -1486,8 +1558,8 @@ //#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh - #define MESH_INSET 1 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. + #define MESH_INSET 5 // Set Mesh bounds as an inset region of the bed + #define GRID_MAX_POINTS_X 5 // Don't use more than 15 points per axis, implementation limited. #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X //#define UBL_HILBERT_CURVE // Use Hilbert distribution for less travel when probing multiple points @@ -1527,11 +1599,11 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS +#define LEVEL_BED_CORNERS #if ENABLED(LEVEL_BED_CORNERS) #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define LEVEL_CORNERS_HEIGHT 0.2 // (mm) Z height of nozzle at leveling points #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points //#define LEVEL_CENTER_TOO // Move to the center after the last corner //#define LEVEL_CORNERS_USE_PROBE @@ -1587,15 +1659,15 @@ // - Move the Z probe (or nozzle) to a defined XY point before Z Homing. // - Prevent Z homing when the Z probe is outside bed area. // -//#define Z_SAFE_HOMING +#define Z_SAFE_HOMING #if ENABLED(Z_SAFE_HOMING) #define Z_SAFE_HOMING_X_POINT X_CENTER // X point for Z homing - #define Z_SAFE_HOMING_Y_POINT Y_CENTER // Y point for Z homing + #define Z_SAFE_HOMING_Y_POINT 4 // Y point for Z homing #endif // Homing speeds (mm/min) -#define HOMING_FEEDRATE_MM_M { (50*60), (50*60), (4*60) } +#define HOMING_FEEDRATE_MM_M { (40*60), (40*60), (6*60) } // Validate that endstops are triggered on homing moves #define VALIDATE_HOMING_ENDSTOPS @@ -1672,7 +1744,7 @@ * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) */ -//#define EEPROM_SETTINGS // Persistent storage with M500 and M501 +#define EEPROM_SETTINGS // Persistent storage with M500 and M501 //#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. #define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load @@ -1706,14 +1778,14 @@ // Preheat Constants - Up to 5 are supported without changes // #define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 180 -#define PREHEAT_1_TEMP_BED 70 +#define PREHEAT_1_TEMP_HOTEND 200 +#define PREHEAT_1_TEMP_BED 60 #define PREHEAT_1_TEMP_CHAMBER 35 #define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 #define PREHEAT_2_LABEL "ABS" -#define PREHEAT_2_TEMP_HOTEND 240 -#define PREHEAT_2_TEMP_BED 110 +#define PREHEAT_2_TEMP_HOTEND 250 +#define PREHEAT_2_TEMP_BED 100 #define PREHEAT_2_TEMP_CHAMBER 35 #define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 @@ -1728,16 +1800,16 @@ * P1 Raise the nozzle always to Z-park height. * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. */ -//#define NOZZLE_PARK_FEATURE +#define NOZZLE_PARK_FEATURE #if ENABLED(NOZZLE_PARK_FEATURE) // Specify a park position as { X, Y, Z_raise } #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 } - //#define NOZZLE_PARK_X_ONLY // X move only is required to park + #define NOZZLE_PARK_X_ONLY // X move only is required to park //#define NOZZLE_PARK_Y_ONLY // Y move only is required to park #define NOZZLE_PARK_Z_RAISE_MIN 2 // (mm) Always raise Z by at least this distance - #define NOZZLE_PARK_XY_FEEDRATE 100 // (mm/s) X and Y axes feedrate (also used for delta Z axis) - #define NOZZLE_PARK_Z_FEEDRATE 5 // (mm/s) Z axis feedrate (not used for delta printers) + #define NOZZLE_PARK_XY_FEEDRATE 50 // (mm/s) X and Y axes feedrate (also used for delta Z axis) + #define NOZZLE_PARK_Z_FEEDRATE 6 // (mm/s) Z axis feedrate (not used for delta printers) #endif /** @@ -1936,7 +2008,7 @@ * SD Card support is disabled by default. If your controller has an SD slot, * you must uncomment the following option or it won't work. */ -//#define SDSUPPORT +#define SDSUPPORT /** * SD CARD: ENABLE CRC @@ -2006,7 +2078,7 @@ // // Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. // -//#define INDIVIDUAL_AXIS_HOMING_MENU +#define INDIVIDUAL_AXIS_HOMING_MENU // // SPEAKER/BUZZER @@ -2023,8 +2095,8 @@ // Note: Test audio output with the G-Code: // M300 S P // -//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 -//#define LCD_FEEDBACK_FREQUENCY_HZ 5000 +//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 250 +//#define LCD_FEEDBACK_FREQUENCY_HZ 1000 //============================================================================= //======================== LCD / Controller Selection ========================= @@ -2518,17 +2590,17 @@ // // Generic TFT with detailed options // -//#define TFT_GENERIC +#define TFT_GENERIC #if ENABLED(TFT_GENERIC) // :[ 'AUTO', 'ST7735', 'ST7789', 'ST7796', 'R61505', 'ILI9328', 'ILI9341', 'ILI9488' ] #define TFT_DRIVER AUTO // Interface. Enable one of the following options: - //#define TFT_INTERFACE_FSMC + #define TFT_INTERFACE_FSMC //#define TFT_INTERFACE_SPI // TFT Resolution. Enable one of the following options: - //#define TFT_RES_320x240 + #define TFT_RES_320x240 //#define TFT_RES_480x272 //#define TFT_RES_480x320 #endif @@ -2543,7 +2615,7 @@ * For LVGL_UI also copy the 'assets' folder from the build directory to the * root of your SD card, together with the compiled firmware. */ -//#define TFT_CLASSIC_UI +#define TFT_CLASSIC_UI //#define TFT_COLOR_UI //#define TFT_LVGL_UI @@ -2573,17 +2645,37 @@ // // Touch Screen Settings // -//#define TOUCH_SCREEN +#define TOUCH_SCREEN #if ENABLED(TOUCH_SCREEN) - #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens - #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus + #define BUTTON_DELAY_EDIT 75 // (ms) Button repeat delay for edit screens + #define BUTTON_DELAY_MENU 100 // (ms) Button repeat delay for menus #define TOUCH_SCREEN_CALIBRATION - //#define TOUCH_CALIBRATION_X 12316 - //#define TOUCH_CALIBRATION_Y -8981 - //#define TOUCH_OFFSET_X -43 - //#define TOUCH_OFFSET_Y 257 + #if ENABLED(TS_V11) + // Alfawise U20 ILI9341 2.8 TP Ver 1.1 / Green PCB on the back of touchscreen + #define TOUCH_CALIBRATION_X 12000 + #define TOUCH_CALIBRATION_Y 9000 + #define TOUCH_OFFSET_X -24 + #define TOUCH_OFFSET_Y -17 + #endif + + #if ENABLED(TS_V12) + // Alfawise U30 ILI9341 2.8 TP Ver 1.2 / Blue PCB on the back of touchscreen + #define TOUCH_CALIBRATION_X 12000 + #define TOUCH_CALIBRATION_Y -9000 + #define TOUCH_OFFSET_X -43 + #define TOUCH_OFFSET_Y 257 + #endif + + #if ENABLED(TS_V19) + // Longer LK4/U30 2.8" Ver 2019 / Blue PCB, SID240x320-8PCB-D + #define TOUCH_CALIBRATION_X -12000 + #define TOUCH_CALIBRATION_Y 9000 + #define TOUCH_OFFSET_X 320 + #define TOUCH_OFFSET_Y 0 + #endif + //#define TOUCH_ORIENTATION TOUCH_LANDSCAPE #if BOTH(TOUCH_SCREEN_CALIBRATION, EEPROM_SETTINGS) diff --git a/config/examples/Alfawise/U20-bltouch/Configuration_adv.h b/config/examples/Alfawise/U20-bltouch/Configuration_adv.h index 5335fa012a..12d844997f 100644 --- a/config/examples/Alfawise/U20-bltouch/Configuration_adv.h +++ b/config/examples/Alfawise/U20-bltouch/Configuration_adv.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Alfawise/U20-bltouch" + /** * Configuration_adv.h * @@ -238,8 +240,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 60 // Seconds + #define THERMAL_PROTECTION_HYSTERESIS 10 // Degrees Celsius //#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops #if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP) @@ -258,7 +260,7 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 20 // Seconds + #define WATCH_TEMP_PERIOD 60 // Seconds #define WATCH_TEMP_INCREASE 2 // Degrees Celsius #endif @@ -437,12 +439,12 @@ * Hotend Idle Timeout * Prevent filament in the nozzle from charring and causing a critical jam. */ -//#define HOTEND_IDLE_TIMEOUT +#define HOTEND_IDLE_TIMEOUT #if ENABLED(HOTEND_IDLE_TIMEOUT) #define HOTEND_IDLE_TIMEOUT_SEC (5*60) // (seconds) Time without extruder movement to trigger protection #define HOTEND_IDLE_MIN_TRIGGER 180 // (°C) Minimum temperature to enable hotend protection - #define HOTEND_IDLE_NOZZLE_TARGET 0 // (°C) Safe temperature for the nozzle after timeout - #define HOTEND_IDLE_BED_TARGET 0 // (°C) Safe temperature for the bed after timeout + #define HOTEND_IDLE_NOZZLE_TARGET 50 // (°C) Safe temperature for the nozzle after timeout + #define HOTEND_IDLE_BED_TARGET 30 // (°C) Safe temperature for the bed after timeout #endif // @section temperature @@ -737,7 +739,7 @@ //#define SENSORLESS_BACKOFF_MM { 2, 2 } // (mm) Backoff from endstops before sensorless homing #define HOMING_BUMP_MM { 5, 5, 2 } // (mm) Backoff from endstops after first bump -#define HOMING_BUMP_DIVISOR { 2, 2, 4 } // Re-Bump Speed Divisor (Divides the Homing Feedrate) +#define HOMING_BUMP_DIVISOR { 4, 4, 4 } // Re-Bump Speed Divisor (Divides the Homing Feedrate) //#define HOMING_BACKOFF_POST_MM { 2, 2, 2 } // (mm) Backoff from endstops after homing @@ -763,6 +765,7 @@ * * Settings for all BLTouch and clone probes: */ + #undef PROBE_MANUALLY // Safety: The probe needs time to recognize the command. // Minimum command delay (ms). Enable and increase if needed. @@ -811,7 +814,7 @@ //#define BLTOUCH_HS_MODE // Safety: Enable voltage mode settings in the LCD menu. - //#define BLTOUCH_LCD_VOLTAGE_MENU + #define BLTOUCH_LCD_VOLTAGE_MENU #endif // BLTOUCH @@ -867,7 +870,7 @@ // On a 300mm bed a 5% grade would give a misalignment of ~1.5cm #define G34_MAX_GRADE 5 // (%) Maximum incline that G34 will handle - #define Z_STEPPER_ALIGN_ITERATIONS 5 // Number of iterations to apply during alignment + #define Z_STEPPER_ALIGN_ITERATIONS 3 // Number of iterations to apply during alignment #define Z_STEPPER_ALIGN_ACC 0.02 // Stop iterating early if the accuracy is better than this #define RESTORE_LEVELING_AFTER_G34 // Restore leveling after G34 is done? // After G34, re-home Z (G28 Z) or just calculate it from the last probe heights? @@ -882,7 +885,16 @@ #if ENABLED(ASSISTED_TRAMMING) // Define positions for probe points. - #define TRAMMING_POINT_XY { { 20, 20 }, { 180, 20 }, { 180, 180 }, { 20, 180 } } + #if defined(U20) || defined(LK1) + #define MAX_THR_X 260 // X 265 may not be reachable by a probe on the left (U20) + #define TRAMMING_POINT_XY { { 30, 30 }, { MAX_THR_X, 30 }, { MAX_THR_X, 275 }, { 30, 275 } } + #elif defined(U30) || defined(LK2) || defined(LK4) + #define MAX_THR_X 180 // X 185 may not be reachable by a probe on the left (U30) + #define TRAMMING_POINT_XY { { 30, 15 }, { MAX_THR_X, 15 }, { MAX_THR_X, 185 }, { 30, 185 } } + #else + // Please adjust for the U20+ (computed from U20 + 10cm) + #define TRAMMING_POINT_XY { { 30, 30 }, { 360, 30 }, { 360, 375 }, { 30, 375 } } + #endif // Define position names for probe points. #define TRAMMING_POINT_NAME_1 "Front-Left" @@ -891,9 +903,9 @@ #define TRAMMING_POINT_NAME_4 "Back-Left" #define RESTORE_LEVELING_AFTER_G35 // Enable to restore leveling setup after operation - //#define REPORT_TRAMMING_MM // Report Z deviation (mm) for each point relative to the first + #define REPORT_TRAMMING_MM // Report Z deviation (mm) for each point relative to the first - //#define ASSISTED_TRAMMING_WIZARD // Add a Tramming Wizard to the LCD menu + #define ASSISTED_TRAMMING_WIZARD // Add a Tramming Wizard to the LCD menu //#define ASSISTED_TRAMMING_WAIT_POSITION { X_CENTER, Y_CENTER, 30 } // Move the nozzle out of the way for adjustment @@ -903,7 +915,7 @@ * M4: 40 = Clockwise, 41 = Counter-Clockwise * M5: 50 = Clockwise, 51 = Counter-Clockwise */ - #define TRAMMING_SCREW_THREAD 30 + #define TRAMMING_SCREW_THREAD 40 #endif @@ -1175,7 +1187,7 @@ #endif // Include a page of printer information in the LCD Main Menu - //#define LCD_INFO_MENU + #define LCD_INFO_MENU #if ENABLED(LCD_INFO_MENU) //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages #endif @@ -1235,7 +1247,7 @@ //#define LCD_DECIMAL_SMALL_XY // Add an 'M73' G-code to set the current percentage - //#define LCD_SET_PROGRESS_MANUALLY + #define LCD_SET_PROGRESS_MANUALLY // Show the E position (filament used) during printing //#define LCD_SHOW_E_TOTAL @@ -1297,11 +1309,11 @@ #define SD_MENU_CONFIRM_START // Confirm the selected SD file before printing //#define NO_SD_AUTOSTART // Remove auto#.g file support completely to save some Flash, SRAM - //#define MENU_ADDAUTOSTART // Add a menu option to run auto#.g files + #define MENU_ADDAUTOSTART // Add a menu option to run auto#.g files //#define BROWSE_MEDIA_ON_INSERT // Open the file browser when media is inserted - #define EVENT_GCODE_SD_ABORT "G28XY" // G-code to run on SD Abort Print (e.g., "G28XY" or "G27") + #define EVENT_GCODE_SD_ABORT "G28X" // G-code to run on SD Abort Print (e.g., "G28XY" or "G27") #if ENABLED(PRINTER_EVENT_LEDS) #define PE_LEDS_COMPLETED_TIME (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination @@ -1315,7 +1327,7 @@ * an option on the LCD screen to continue the print from the last-known * point in the file. */ - //#define POWER_LOSS_RECOVERY + #define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) //#define BACKUP_POWER_SUPPLY // Backup power / UPS to move the steppers on power loss @@ -1361,16 +1373,16 @@ * - SDSORT_CACHE_NAMES will retain the sorted file listing in RAM. (Expensive!) * - SDSORT_DYNAMIC_RAM only uses RAM when the SD menu is visible. (Use with caution!) */ - //#define SDCARD_SORT_ALPHA + #define SDCARD_SORT_ALPHA // SD Card Sorting options #if ENABLED(SDCARD_SORT_ALPHA) #define SDSORT_LIMIT 40 // Maximum number of sorted items (10-256). Costs 27 bytes each. #define FOLDER_SORTING -1 // -1=above 0=none 1=below - #define SDSORT_GCODE false // Allow turning sorting on/off with LCD and M34 G-code. - #define SDSORT_USES_RAM false // Pre-allocate a static array for faster pre-sorting. + #define SDSORT_GCODE true // Allow turning sorting on/off with LCD and M34 G-code. + #define SDSORT_USES_RAM true // Pre-allocate a static array for faster pre-sorting. #define SDSORT_USES_STACK false // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.) - #define SDSORT_CACHE_NAMES false // Keep sorted items in RAM longer for speedy performance. Most expensive option. + #define SDSORT_CACHE_NAMES true // Keep sorted items in RAM longer for speedy performance. Most expensive option. #define SDSORT_DYNAMIC_RAM false // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use! #define SDSORT_CACHE_VFATS 2 // Maximum number of 13-byte VFAT entries to use for sorting. // Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM. @@ -1381,7 +1393,7 @@ //#define UTF_FILENAME_SUPPORT // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT + #define LONG_FILENAME_HOST_SUPPORT // Enable this option to scroll long filenames in the SD card menu //#define SCROLL_LONG_FILENAMES @@ -1401,7 +1413,7 @@ * On print completion the LCD Menu will open with the file selected. * You can just click to start the print, or navigate elsewhere. */ - //#define SD_REPRINT_LAST_SELECTED_FILE + #define SD_REPRINT_LAST_SELECTED_FILE /** * Auto-report SdCard status with M27 S @@ -1512,7 +1524,7 @@ */ #if HAS_MARLINUI_U8GLIB // Show SD percentage next to the progress bar - //#define DOGM_SD_PERCENT + #define DOGM_SD_PERCENT // Save many cycles by drawing a hollow frame or no frame on the Info Screen //#define XYZ_NO_FRAME @@ -1572,7 +1584,7 @@ //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames - //#define STATUS_HEAT_PERCENT // Show heating in a progress bar + #define STATUS_HEAT_PERCENT // Show heating in a progress bar //#define BOOT_MARLIN_LOGO_ANIMATED // Animated Marlin logo. Costs ~‭3260 (or ~940) bytes of PROGMEM. // Frivolous Game Options @@ -1750,12 +1762,13 @@ // Classic UI Options // #if TFT_SCALED_DOGLCD - //#define TFT_MARLINUI_COLOR 0xFFFF // White - //#define TFT_MARLINBG_COLOR 0x0000 // Black - //#define TFT_DISABLED_COLOR 0x0003 // Almost black - //#define TFT_BTCANCEL_COLOR 0xF800 // Red - //#define TFT_BTARROWS_COLOR 0xDEE6 // 11011 110111 00110 Yellow - //#define TFT_BTOKMENU_COLOR 0x145F // 00010 100010 11111 Cyan + // see https://ee-programming-notepad.blogspot.com/2016/10/16-bit-color-generator-picker.html + #define TFT_MARLINUI_COLOR COLOR_WHITE + #define TFT_MARLINBG_COLOR COLOR_BLACK + #define TFT_DISABLED_COLOR 0x10A2 // almost black + #define TFT_BTCANCEL_COLOR COLOR_RED + #define TFT_BTARROWS_COLOR COLOR_WHITE + #define TFT_BTOKMENU_COLOR COLOR_BLUE #endif // @@ -1888,10 +1901,10 @@ #if EITHER(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL) // Override the mesh area if the automatic (max) area is too large - //#define MESH_MIN_X MESH_INSET - //#define MESH_MIN_Y MESH_INSET - //#define MESH_MAX_X X_BED_SIZE - (MESH_INSET) - //#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET) + #define MESH_MIN_X _MAX(MESH_INSET, PROBING_MARGIN) + #define MESH_MIN_Y _MAX(MESH_INSET, PROBING_MARGIN) + #define MESH_MAX_X X_BED_SIZE - 35 // NOZZLE_TO_PROBE_OFFSET + #define MESH_MAX_Y Y_BED_SIZE - _MAX(MESH_INSET, PROBING_MARGIN) #endif #if BOTH(AUTO_BED_LEVELING_UBL, EEPROM_SETTINGS) @@ -2082,16 +2095,16 @@ #if BOTH(SDSUPPORT, DIRECT_STEPPING) #define BLOCK_BUFFER_SIZE 8 #elif ENABLED(SDSUPPORT) - #define BLOCK_BUFFER_SIZE 16 + #define BLOCK_BUFFER_SIZE 32 #else - #define BLOCK_BUFFER_SIZE 16 + #define BLOCK_BUFFER_SIZE 16 // Marlin default #endif // @section serial // The ASCII buffer for serial input #define MAX_CMD_SIZE 96 -#define BUFSIZE 4 +#define BUFSIZE 8 // Transmission to Host Buffer Size // To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0. @@ -2311,7 +2324,7 @@ * * Enable PARK_HEAD_ON_PAUSE to add the G-code M125 Pause and Park. */ -//#define ADVANCED_PAUSE_FEATURE +#define ADVANCED_PAUSE_FEATURE #if ENABLED(ADVANCED_PAUSE_FEATURE) #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. @@ -2332,11 +2345,11 @@ // For direct drive, the full length of the nozzle. //#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted. #define ADVANCED_PAUSE_PURGE_FEEDRATE 3 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate. - #define ADVANCED_PAUSE_PURGE_LENGTH 50 // (mm) Length to extrude after loading. + #define ADVANCED_PAUSE_PURGE_LENGTH 30 // (mm) Length to extrude after loading. // Set to 0 for manual extrusion. // Filament can be extruded repeatedly from the Filament Change menu // until extrusion is consistent, and to purge old filament. - #define ADVANCED_PAUSE_RESUME_PRIME 0 // (mm) Extra distance to prime nozzle after returning from park. + #define ADVANCED_PAUSE_RESUME_PRIME 1 // (mm) Extra distance to prime nozzle after returning from park. //#define ADVANCED_PAUSE_FANS_PAUSE // Turn off print-cooling fans while the machine is paused. // Filament Unload does a Retract, Delay, and Purge first: @@ -2352,7 +2365,7 @@ //#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. //#define HOME_BEFORE_FILAMENT_CHANGE // If needed, home before parking for filament change - //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. + #define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) #endif diff --git a/config/examples/Alfawise/U20/Configuration.h b/config/examples/Alfawise/U20/Configuration.h index 78c2dc9160..d5a79ce3f5 100644 --- a/config/examples/Alfawise/U20/Configuration.h +++ b/config/examples/Alfawise/U20/Configuration.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Alfawise/U20" + /** * Configuration.h * @@ -66,10 +68,35 @@ // //=========================================================================== +//=========================================================================== +//============================= Alfawise Printer ============================ +//=========================================================================== + +// Forum link to help with a tutorial, in French! : +// https://www.lesimprimantes3d.fr/forum/topic/18260-alfawise-u20x-u30-marlin-2x-firmware-alternatif/ +// +// 1 - Select your Alfawise U30 or U20 or U20+ printer (NO MORE REQUIRED HERE) +// and the touchscreen version, either 1.1 or 1.2. Most recent in France are v1.2 (blue pcb) +// These defines are set in platformio.ini build parameters, sample for U20 -DU20 -DTS_V12 +// U20_PLUS was not tested, as we do not have a printer to test. Print bed PID settings MUST be tuned for it. + +// Valid platformio.ini submodel values are U20_PLUS U20 U30 LK1 LK2 LK4 + +// Valid platformio.ini touchscreens are TS_V11 TS_V12 TS_V19 + +// 2 - Select the screen controller type. Most common is ILI9341 - First option. If your screen remains white, +// Try the alternate setting - this should enable ST7789V or ILI9328. For other LCDs... code is needed +// with the proper boot sequence to be developped. + +#define LCD_READ_ID 0xD3 // Read display identification information in reg ID4 0xD3, for ILI9341 screens +//#define LCD_READ_ID 0x04 // Read display identification information in reg ID1 0x04 - ST7789V / ILI9328 or others + +//=========================================================================== + // @section info // Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes. +#define STRING_CONFIG_H_AUTHOR "Hobi, tpruvot" // Who made the changes. //#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) /** @@ -90,7 +117,7 @@ //#define SHOW_CUSTOM_BOOTSCREEN // Show the bitmap in Marlin/_Statusscreen.h on the status screen. -//#define CUSTOM_STATUS_SCREEN_IMAGE +#define CUSTOM_STATUS_SCREEN_IMAGE // @section machine @@ -102,14 +129,14 @@ * * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] */ -#define SERIAL_PORT 0 +#define SERIAL_PORT 1 /** * Select a secondary serial port on the board to use for communication with the host. * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] */ -//#define SERIAL_PORT_2 -1 +//#define SERIAL_PORT_2 2 /** * Select a third serial port on the board to use for communication with the host. @@ -134,11 +161,24 @@ // Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_RAMPS_14_EFB + #define MOTHERBOARD BOARD_LONGER3D_LK #endif // Name displayed in the LCD "Ready" message and Info menu //#define CUSTOM_MACHINE_NAME "3D Printer" +#ifdef U20 + #define CUSTOM_MACHINE_NAME "Alfawise U20" +#elif defined(U30) + #define CUSTOM_MACHINE_NAME "Alfawise U30" +#elif defined(U20_PLUS) + #define CUSTOM_MACHINE_NAME "Alfawise U20+" +#elif defined(LK1) + #define CUSTOM_MACHINE_NAME "Longer3D LK1" +#elif defined(LK2) + #define CUSTOM_MACHINE_NAME "Longer3D LK2" +#elif defined(LK4) + #define CUSTOM_MACHINE_NAME "Longer3D LK4" +#endif // Printer's unique ID, used by some programs to differentiate between machines. // Choose your own or use a service like https://www.uuidgenerator.net/version4 @@ -319,7 +359,7 @@ * Specify whether the power supply is active HIGH or active LOW. */ //#define PSU_CONTROL -//#define PSU_NAME "Power Supply" +#define PSU_NAME "360W 24V/15A" #if ENABLED(PSU_CONTROL) #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box @@ -424,7 +464,7 @@ #define TEMP_SENSOR_5 0 #define TEMP_SENSOR_6 0 #define TEMP_SENSOR_7 0 -#define TEMP_SENSOR_BED 0 +#define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 #define TEMP_SENSOR_COOLER 0 @@ -510,16 +550,20 @@ //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) // Set/get with gcode: M301 E[extruder number, 0-2] + // Alfawise U30/U20 + // Please refine the PID settings for your own machine to avoid the E1 hotend error. These a basic settings allowing first startups. + // Use the command M303 E0 S200 C8 each time you make any changes to your extruder + #if ENABLED(PID_PARAMS_PER_HOTEND) // Specify between 1 and HOTENDS values per array. // If fewer than EXTRUDER values are provided, the last element will be repeated. - #define DEFAULT_Kp_LIST { 22.20, 22.20 } - #define DEFAULT_Ki_LIST { 1.08, 1.08 } - #define DEFAULT_Kd_LIST { 114.00, 114.00 } + #define DEFAULT_Kp_LIST { 17.22, 17.22 } + #define DEFAULT_Ki_LIST { 1.00, 1.00 } + #define DEFAULT_Kd_LIST { 74.22, 74.22 } #else - #define DEFAULT_Kp 22.20 - #define DEFAULT_Ki 1.08 - #define DEFAULT_Kd 114.00 + #define DEFAULT_Kp 17.22 + #define DEFAULT_Ki 1.00 + #define DEFAULT_Kd 74.22 #endif #endif // PIDTEMP @@ -540,7 +584,7 @@ * heater. If your configuration is significantly different than this and you don't understand * the issues involved, don't use bed PID until someone else verifies that your hardware works. */ -//#define PIDTEMPBED +#define PIDTEMPBED //#define BED_LIMIT_SWITCHING @@ -556,11 +600,26 @@ //#define MIN_BED_POWER 0 //#define PID_BED_DEBUG // Sends debug data to the serial port. - // 120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - // from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) - #define DEFAULT_bedKp 10.00 - #define DEFAULT_bedKi .023 - #define DEFAULT_bedKd 305.4 + #if defined(U30) || defined(LK2) || defined(LK4) + // From M303 command for Alfawise U30 + #define DEFAULT_bedKp 338.46 + #define DEFAULT_bedKi 63.96 + #define DEFAULT_bedKd 447.78 + #endif + + #if defined(U20) || defined(LK1) + // From M303 command for Alfawise U20 + #define DEFAULT_bedKp 841.68 + #define DEFAULT_bedKi 152.12 + #define DEFAULT_bedKd 1164.25 + #endif + + #ifdef U20_PLUS + // These PID settings MUST be updated + #define DEFAULT_bedKp 841.68 + #define DEFAULT_bedKi 152.12 + #define DEFAULT_bedKd 1164.25 + #endif // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. #endif // PIDTEMPBED @@ -655,7 +714,7 @@ #define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders #define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed -#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber +//#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber #define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling //=========================================================================== @@ -691,7 +750,7 @@ //#define USE_ZMAX_PLUG // Enable pullup for all endstops to prevent a floating state -#define ENDSTOPPULLUPS +//#define ENDSTOPPULLUPS #if DISABLED(ENDSTOPPULLUPS) // Disable ENDSTOPPULLUPS to set pullups individually //#define ENDSTOPPULLUP_XMAX @@ -717,12 +776,12 @@ #endif // Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define X_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. +#define X_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Y_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Z_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define X_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Y_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Z_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. #define Z_MIN_PROBE_ENDSTOP_INVERTING false // Set to true to invert the logic of the probe. /** @@ -762,7 +821,7 @@ // Enable this feature if all enabled endstop pins are interrupt-capable. // This will remove the need to poll the interrupt pins, saving many CPU cycles. -//#define ENDSTOP_INTERRUPTS_FEATURE +#define ENDSTOP_INTERRUPTS_FEATURE /** * Endstop Noise Threshold @@ -806,18 +865,18 @@ * Override with M92 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 500 } +#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 98 } /** * Default Max Feed Rate (mm/s) * Override with M203 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 } +#define DEFAULT_MAX_FEEDRATE { 200, 200, 100, 25 } -//#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 +#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 #if ENABLED(LIMITED_MAX_FR_EDITING) - #define MAX_FEEDRATE_EDIT_VALUES { 600, 600, 10, 50 } // ...or, set your own edit limits + #define MAX_FEEDRATE_EDIT_VALUES { 250, 250, 200, 50 } // ...or, set your own edit limits #endif /** @@ -826,11 +885,11 @@ * Override with M201 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 } +#define DEFAULT_MAX_ACCELERATION { 200, 200, 100, 3000 } -//#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 +#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 #if ENABLED(LIMITED_MAX_ACCEL_EDITING) - #define MAX_ACCEL_EDIT_VALUES { 6000, 6000, 200, 20000 } // ...or, set your own edit limits + #define MAX_ACCEL_EDIT_VALUES { 600, 600, 400, 6000 } // ...or, set your own edit limits #endif /** @@ -841,9 +900,9 @@ * M204 R Retract Acceleration * M204 T Travel Acceleration */ -#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves +#define DEFAULT_ACCELERATION 200 // X, Y, Z and E acceleration for printing moves +#define DEFAULT_RETRACT_ACCELERATION 500 // E acceleration for retracts +#define DEFAULT_TRAVEL_ACCELERATION 200 // X, Y, Z acceleration for travel (non printing) moves /** * Default Jerk limits (mm/s) @@ -853,15 +912,15 @@ * When changing speed and direction, if the difference is less than the * value set here, it may happen instantaneously. */ -//#define CLASSIC_JERK +#define CLASSIC_JERK #if ENABLED(CLASSIC_JERK) #define DEFAULT_XJERK 10.0 #define DEFAULT_YJERK 10.0 - #define DEFAULT_ZJERK 0.3 + #define DEFAULT_ZJERK 0.4 //#define TRAVEL_EXTRA_XYJERK 0.0 // Additional jerk allowance for all travel moves - //#define LIMITED_JERK_EDITING // Limit edit via M205 or LCD to DEFAULT_aJERK * 2 + #define LIMITED_JERK_EDITING // Limit edit via M205 or LCD to DEFAULT_aJERK * 2 #if ENABLED(LIMITED_JERK_EDITING) #define MAX_JERK_EDIT_VALUES { 20, 20, 0.6, 10 } // ...or, set your own edit limits #endif @@ -877,7 +936,7 @@ * https://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html */ #if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.013 // (mm) Distance from real junction edge + #define JUNCTION_DEVIATION_MM 0.10 // (mm) Distance from real junction edge #define JD_HANDLE_SMALL_SEGMENTS // Use curvature estimation instead of just the junction angle // for small segments (< 1mm) with large junction angles (> 135°). #endif @@ -940,7 +999,7 @@ * Use G29 repeatedly, adjusting the Z height at each point with movement commands * or (with LCD_BED_LEVELING) the LCD controller. */ -//#define PROBE_MANUALLY +#define PROBE_MANUALLY /** * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. @@ -977,6 +1036,7 @@ */ //#define TOUCH_MI_PROBE #if ENABLED(TOUCH_MI_PROBE) + #undef PROBE_MANUALLY #define TOUCH_MI_RETRACT_Z 0.5 // Height at which the probe retracts //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2) // For a magnet on the right side of the bed //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) @@ -1062,10 +1122,10 @@ #define PROBING_MARGIN 10 // X and Y axis travel speed (mm/min) between probes -#define XY_PROBE_FEEDRATE (133*60) +#define XY_PROBE_FEEDRATE (80*60) // Feedrate (mm/min) for the first approach when double-probing (MULTIPLE_PROBING == 2) -#define Z_PROBE_FEEDRATE_FAST (4*60) +#define Z_PROBE_FEEDRATE_FAST (7*60) // Feedrate (mm/min) for the "accurate" probe of each point #define Z_PROBE_FEEDRATE_SLOW (Z_PROBE_FEEDRATE_FAST / 2) @@ -1190,9 +1250,9 @@ // @section machine // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR false -#define INVERT_Y_DIR true -#define INVERT_Z_DIR false +#define INVERT_X_DIR true +#define INVERT_Y_DIR false +#define INVERT_Z_DIR true // @section extruder @@ -1218,7 +1278,7 @@ */ //#define Z_IDLE_HEIGHT Z_HOME_POS -//#define Z_HOMING_HEIGHT 4 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ... +//#define Z_HOMING_HEIGHT 10 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ... // Be sure to have this much clearance over your Z_MAX_POS to prevent grinding. //#define Z_AFTER_HOMING 10 // (mm) Height to move to after homing Z @@ -1231,9 +1291,23 @@ // @section machine -// The size of the printable area -#define X_BED_SIZE 200 -#define Y_BED_SIZE 200 +#if defined(U30) || defined(LK2) || defined(LK4) +#define X_BED_SIZE 220 +#define Y_BED_SIZE 220 +#define Z_MACHINE_MAX 250 +#endif + +#if defined(U20) || defined(LK1) +#define X_BED_SIZE 300 +#define Y_BED_SIZE 300 +#define Z_MACHINE_MAX 400 +#endif + +#ifdef U20_PLUS +#define X_BED_SIZE 400 +#define Y_BED_SIZE 400 +#define Z_MACHINE_MAX 500 +#endif // Travel limits (mm) after homing, corresponding to endstop positions. #define X_MIN_POS 0 @@ -1241,7 +1315,7 @@ #define Z_MIN_POS 0 #define X_MAX_POS X_BED_SIZE #define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 200 +#define Z_MAX_POS Z_MACHINE_MAX /** * Software Endstops @@ -1285,13 +1359,13 @@ * RAMPS-based boards use SERVO3_PIN for the first runout sensor. * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. */ -//#define FILAMENT_RUNOUT_SENSOR +#define FILAMENT_RUNOUT_SENSOR #if ENABLED(FILAMENT_RUNOUT_SENSOR) #define FIL_RUNOUT_ENABLED_DEFAULT true // Enable the sensor on startup. Override with M412 followed by M500. #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. - #define FIL_RUNOUT_STATE LOW // Pin state indicating that filament is NOT present. - #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. + #define FIL_RUNOUT_STATE HIGH // Pin state indicating that filament is NOT present. + //#define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. //#define WATCH_ALL_RUNOUT_SENSORS // Execute runout script on any triggering sensor, not only for the active extruder. // This is automatically enabled for MIXING_EXTRUDERs. @@ -1389,7 +1463,7 @@ //#define AUTO_BED_LEVELING_LINEAR //#define AUTO_BED_LEVELING_BILINEAR //#define AUTO_BED_LEVELING_UBL -//#define MESH_BED_LEVELING +#define MESH_BED_LEVELING /** * Normally G28 leaves leveling disabled on completion. Enable one of @@ -1527,11 +1601,11 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS +#define LEVEL_BED_CORNERS #if ENABLED(LEVEL_BED_CORNERS) #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define LEVEL_CORNERS_HEIGHT 0.2 // (mm) Z height of nozzle at leveling points #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points //#define LEVEL_CENTER_TOO // Move to the center after the last corner //#define LEVEL_CORNERS_USE_PROBE @@ -1591,11 +1665,11 @@ #if ENABLED(Z_SAFE_HOMING) #define Z_SAFE_HOMING_X_POINT X_CENTER // X point for Z homing - #define Z_SAFE_HOMING_Y_POINT Y_CENTER // Y point for Z homing + #define Z_SAFE_HOMING_Y_POINT 4 // Y point for Z homing #endif // Homing speeds (mm/min) -#define HOMING_FEEDRATE_MM_M { (50*60), (50*60), (4*60) } +#define HOMING_FEEDRATE_MM_M { (40*60), (40*60), (6*60) } // Validate that endstops are triggered on homing moves #define VALIDATE_HOMING_ENDSTOPS @@ -1672,7 +1746,7 @@ * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) */ -//#define EEPROM_SETTINGS // Persistent storage with M500 and M501 +#define EEPROM_SETTINGS // Persistent storage with M500 and M501 //#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. #define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load @@ -1706,14 +1780,14 @@ // Preheat Constants - Up to 5 are supported without changes // #define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 180 -#define PREHEAT_1_TEMP_BED 70 +#define PREHEAT_1_TEMP_HOTEND 200 +#define PREHEAT_1_TEMP_BED 60 #define PREHEAT_1_TEMP_CHAMBER 35 #define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 #define PREHEAT_2_LABEL "ABS" -#define PREHEAT_2_TEMP_HOTEND 240 -#define PREHEAT_2_TEMP_BED 110 +#define PREHEAT_2_TEMP_HOTEND 250 +#define PREHEAT_2_TEMP_BED 100 #define PREHEAT_2_TEMP_CHAMBER 35 #define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 @@ -1728,16 +1802,16 @@ * P1 Raise the nozzle always to Z-park height. * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. */ -//#define NOZZLE_PARK_FEATURE +#define NOZZLE_PARK_FEATURE #if ENABLED(NOZZLE_PARK_FEATURE) // Specify a park position as { X, Y, Z_raise } #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 } - //#define NOZZLE_PARK_X_ONLY // X move only is required to park + #define NOZZLE_PARK_X_ONLY // X move only is required to park //#define NOZZLE_PARK_Y_ONLY // Y move only is required to park #define NOZZLE_PARK_Z_RAISE_MIN 2 // (mm) Always raise Z by at least this distance - #define NOZZLE_PARK_XY_FEEDRATE 100 // (mm/s) X and Y axes feedrate (also used for delta Z axis) - #define NOZZLE_PARK_Z_FEEDRATE 5 // (mm/s) Z axis feedrate (not used for delta printers) + #define NOZZLE_PARK_XY_FEEDRATE 50 // (mm/s) X and Y axes feedrate (also used for delta Z axis) + #define NOZZLE_PARK_Z_FEEDRATE 6 // (mm/s) Z axis feedrate (not used for delta printers) #endif /** @@ -1936,7 +2010,7 @@ * SD Card support is disabled by default. If your controller has an SD slot, * you must uncomment the following option or it won't work. */ -//#define SDSUPPORT +#define SDSUPPORT /** * SD CARD: ENABLE CRC @@ -2006,7 +2080,7 @@ // // Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. // -//#define INDIVIDUAL_AXIS_HOMING_MENU +#define INDIVIDUAL_AXIS_HOMING_MENU // // SPEAKER/BUZZER @@ -2023,8 +2097,8 @@ // Note: Test audio output with the G-Code: // M300 S P // -//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 -//#define LCD_FEEDBACK_FREQUENCY_HZ 5000 +//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 250 +//#define LCD_FEEDBACK_FREQUENCY_HZ 1000 //============================================================================= //======================== LCD / Controller Selection ========================= @@ -2498,7 +2572,7 @@ // // 320x240, 2.8", FSMC Stock Display from Longer/Alfawise // -//#define LONGER_LK_TFT28 +#define LONGER_LK_TFT28 // // 320x240, 2.8", FSMC Stock Display from ET4 @@ -2543,7 +2617,7 @@ * For LVGL_UI also copy the 'assets' folder from the build directory to the * root of your SD card, together with the compiled firmware. */ -//#define TFT_CLASSIC_UI +#define TFT_CLASSIC_UI //#define TFT_COLOR_UI //#define TFT_LVGL_UI @@ -2573,17 +2647,37 @@ // // Touch Screen Settings // -//#define TOUCH_SCREEN +#define TOUCH_SCREEN #if ENABLED(TOUCH_SCREEN) - #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens - #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus + #define BUTTON_DELAY_EDIT 75 // (ms) Button repeat delay for edit screens + #define BUTTON_DELAY_MENU 100 // (ms) Button repeat delay for menus #define TOUCH_SCREEN_CALIBRATION - //#define TOUCH_CALIBRATION_X 12316 - //#define TOUCH_CALIBRATION_Y -8981 - //#define TOUCH_OFFSET_X -43 - //#define TOUCH_OFFSET_Y 257 + #if ENABLED(TS_V11) + // Alfawise U20 ILI9341 2.8 TP Ver 1.1 / Green PCB on the back of touchscreen + #define TOUCH_CALIBRATION_X 12000 + #define TOUCH_CALIBRATION_Y 9000 + #define TOUCH_OFFSET_X -24 + #define TOUCH_OFFSET_Y -17 + #endif + + #if ENABLED(TS_V12) + // Alfawise U30 ILI9341 2.8 TP Ver 1.2 / Blue PCB on the back of touchscreen + #define TOUCH_CALIBRATION_X 12000 + #define TOUCH_CALIBRATION_Y -9000 + #define TOUCH_OFFSET_X -43 + #define TOUCH_OFFSET_Y 257 + #endif + + #if ENABLED(TS_V19) + // Longer LK4/U30 2.8" Ver 2019 / Blue PCB, SID240x320-8PCB-D + #define TOUCH_CALIBRATION_X -12000 + #define TOUCH_CALIBRATION_Y 9000 + #define TOUCH_OFFSET_X 320 + #define TOUCH_OFFSET_Y 0 + #endif + //#define TOUCH_ORIENTATION TOUCH_LANDSCAPE #if BOTH(TOUCH_SCREEN_CALIBRATION, EEPROM_SETTINGS) diff --git a/config/examples/Alfawise/U20/Configuration_adv.h b/config/examples/Alfawise/U20/Configuration_adv.h index 5335fa012a..9046e972ba 100644 --- a/config/examples/Alfawise/U20/Configuration_adv.h +++ b/config/examples/Alfawise/U20/Configuration_adv.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Alfawise/U20" + /** * Configuration_adv.h * @@ -238,8 +240,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 60 // Seconds + #define THERMAL_PROTECTION_HYSTERESIS 10 // Degrees Celsius //#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops #if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP) @@ -258,7 +260,7 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 20 // Seconds + #define WATCH_TEMP_PERIOD 60 // Seconds #define WATCH_TEMP_INCREASE 2 // Degrees Celsius #endif @@ -437,12 +439,12 @@ * Hotend Idle Timeout * Prevent filament in the nozzle from charring and causing a critical jam. */ -//#define HOTEND_IDLE_TIMEOUT +#define HOTEND_IDLE_TIMEOUT #if ENABLED(HOTEND_IDLE_TIMEOUT) #define HOTEND_IDLE_TIMEOUT_SEC (5*60) // (seconds) Time without extruder movement to trigger protection #define HOTEND_IDLE_MIN_TRIGGER 180 // (°C) Minimum temperature to enable hotend protection - #define HOTEND_IDLE_NOZZLE_TARGET 0 // (°C) Safe temperature for the nozzle after timeout - #define HOTEND_IDLE_BED_TARGET 0 // (°C) Safe temperature for the bed after timeout + #define HOTEND_IDLE_NOZZLE_TARGET 50 // (°C) Safe temperature for the nozzle after timeout + #define HOTEND_IDLE_BED_TARGET 30 // (°C) Safe temperature for the bed after timeout #endif // @section temperature @@ -737,7 +739,7 @@ //#define SENSORLESS_BACKOFF_MM { 2, 2 } // (mm) Backoff from endstops before sensorless homing #define HOMING_BUMP_MM { 5, 5, 2 } // (mm) Backoff from endstops after first bump -#define HOMING_BUMP_DIVISOR { 2, 2, 4 } // Re-Bump Speed Divisor (Divides the Homing Feedrate) +#define HOMING_BUMP_DIVISOR { 4, 4, 4 } // Re-Bump Speed Divisor (Divides the Homing Feedrate) //#define HOMING_BACKOFF_POST_MM { 2, 2, 2 } // (mm) Backoff from endstops after homing @@ -867,7 +869,7 @@ // On a 300mm bed a 5% grade would give a misalignment of ~1.5cm #define G34_MAX_GRADE 5 // (%) Maximum incline that G34 will handle - #define Z_STEPPER_ALIGN_ITERATIONS 5 // Number of iterations to apply during alignment + #define Z_STEPPER_ALIGN_ITERATIONS 3 // Number of iterations to apply during alignment #define Z_STEPPER_ALIGN_ACC 0.02 // Stop iterating early if the accuracy is better than this #define RESTORE_LEVELING_AFTER_G34 // Restore leveling after G34 is done? // After G34, re-home Z (G28 Z) or just calculate it from the last probe heights? @@ -1175,7 +1177,7 @@ #endif // Include a page of printer information in the LCD Main Menu - //#define LCD_INFO_MENU + #define LCD_INFO_MENU #if ENABLED(LCD_INFO_MENU) //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages #endif @@ -1235,7 +1237,7 @@ //#define LCD_DECIMAL_SMALL_XY // Add an 'M73' G-code to set the current percentage - //#define LCD_SET_PROGRESS_MANUALLY + #define LCD_SET_PROGRESS_MANUALLY // Show the E position (filament used) during printing //#define LCD_SHOW_E_TOTAL @@ -1297,11 +1299,11 @@ #define SD_MENU_CONFIRM_START // Confirm the selected SD file before printing //#define NO_SD_AUTOSTART // Remove auto#.g file support completely to save some Flash, SRAM - //#define MENU_ADDAUTOSTART // Add a menu option to run auto#.g files + #define MENU_ADDAUTOSTART // Add a menu option to run auto#.g files //#define BROWSE_MEDIA_ON_INSERT // Open the file browser when media is inserted - #define EVENT_GCODE_SD_ABORT "G28XY" // G-code to run on SD Abort Print (e.g., "G28XY" or "G27") + #define EVENT_GCODE_SD_ABORT "G28X" // G-code to run on SD Abort Print (e.g., "G28XY" or "G27") #if ENABLED(PRINTER_EVENT_LEDS) #define PE_LEDS_COMPLETED_TIME (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination @@ -1315,7 +1317,7 @@ * an option on the LCD screen to continue the print from the last-known * point in the file. */ - //#define POWER_LOSS_RECOVERY + #define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) //#define BACKUP_POWER_SUPPLY // Backup power / UPS to move the steppers on power loss @@ -1361,16 +1363,16 @@ * - SDSORT_CACHE_NAMES will retain the sorted file listing in RAM. (Expensive!) * - SDSORT_DYNAMIC_RAM only uses RAM when the SD menu is visible. (Use with caution!) */ - //#define SDCARD_SORT_ALPHA + #define SDCARD_SORT_ALPHA // SD Card Sorting options #if ENABLED(SDCARD_SORT_ALPHA) #define SDSORT_LIMIT 40 // Maximum number of sorted items (10-256). Costs 27 bytes each. #define FOLDER_SORTING -1 // -1=above 0=none 1=below - #define SDSORT_GCODE false // Allow turning sorting on/off with LCD and M34 G-code. - #define SDSORT_USES_RAM false // Pre-allocate a static array for faster pre-sorting. + #define SDSORT_GCODE true // Allow turning sorting on/off with LCD and M34 G-code. + #define SDSORT_USES_RAM true // Pre-allocate a static array for faster pre-sorting. #define SDSORT_USES_STACK false // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.) - #define SDSORT_CACHE_NAMES false // Keep sorted items in RAM longer for speedy performance. Most expensive option. + #define SDSORT_CACHE_NAMES true // Keep sorted items in RAM longer for speedy performance. Most expensive option. #define SDSORT_DYNAMIC_RAM false // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use! #define SDSORT_CACHE_VFATS 2 // Maximum number of 13-byte VFAT entries to use for sorting. // Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM. @@ -1381,7 +1383,7 @@ //#define UTF_FILENAME_SUPPORT // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT + #define LONG_FILENAME_HOST_SUPPORT // Enable this option to scroll long filenames in the SD card menu //#define SCROLL_LONG_FILENAMES @@ -1401,7 +1403,7 @@ * On print completion the LCD Menu will open with the file selected. * You can just click to start the print, or navigate elsewhere. */ - //#define SD_REPRINT_LAST_SELECTED_FILE + #define SD_REPRINT_LAST_SELECTED_FILE /** * Auto-report SdCard status with M27 S @@ -1512,7 +1514,7 @@ */ #if HAS_MARLINUI_U8GLIB // Show SD percentage next to the progress bar - //#define DOGM_SD_PERCENT + #define DOGM_SD_PERCENT // Save many cycles by drawing a hollow frame or no frame on the Info Screen //#define XYZ_NO_FRAME @@ -1572,7 +1574,7 @@ //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames - //#define STATUS_HEAT_PERCENT // Show heating in a progress bar + #define STATUS_HEAT_PERCENT // Show heating in a progress bar //#define BOOT_MARLIN_LOGO_ANIMATED // Animated Marlin logo. Costs ~‭3260 (or ~940) bytes of PROGMEM. // Frivolous Game Options @@ -1750,12 +1752,13 @@ // Classic UI Options // #if TFT_SCALED_DOGLCD - //#define TFT_MARLINUI_COLOR 0xFFFF // White - //#define TFT_MARLINBG_COLOR 0x0000 // Black - //#define TFT_DISABLED_COLOR 0x0003 // Almost black - //#define TFT_BTCANCEL_COLOR 0xF800 // Red - //#define TFT_BTARROWS_COLOR 0xDEE6 // 11011 110111 00110 Yellow - //#define TFT_BTOKMENU_COLOR 0x145F // 00010 100010 11111 Cyan + // see https://ee-programming-notepad.blogspot.com/2016/10/16-bit-color-generator-picker.html + #define TFT_MARLINUI_COLOR COLOR_WHITE + #define TFT_MARLINBG_COLOR COLOR_BLACK + #define TFT_DISABLED_COLOR 0x10A2 // almost black + #define TFT_BTCANCEL_COLOR COLOR_RED + #define TFT_BTARROWS_COLOR COLOR_WHITE + #define TFT_BTOKMENU_COLOR COLOR_BLUE #endif // @@ -2082,16 +2085,16 @@ #if BOTH(SDSUPPORT, DIRECT_STEPPING) #define BLOCK_BUFFER_SIZE 8 #elif ENABLED(SDSUPPORT) - #define BLOCK_BUFFER_SIZE 16 + #define BLOCK_BUFFER_SIZE 32 #else - #define BLOCK_BUFFER_SIZE 16 + #define BLOCK_BUFFER_SIZE 16 // Marlin default #endif // @section serial // The ASCII buffer for serial input #define MAX_CMD_SIZE 96 -#define BUFSIZE 4 +#define BUFSIZE 8 // Transmission to Host Buffer Size // To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0. @@ -2311,7 +2314,7 @@ * * Enable PARK_HEAD_ON_PAUSE to add the G-code M125 Pause and Park. */ -//#define ADVANCED_PAUSE_FEATURE +#define ADVANCED_PAUSE_FEATURE #if ENABLED(ADVANCED_PAUSE_FEATURE) #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. @@ -2332,7 +2335,7 @@ // For direct drive, the full length of the nozzle. //#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted. #define ADVANCED_PAUSE_PURGE_FEEDRATE 3 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate. - #define ADVANCED_PAUSE_PURGE_LENGTH 50 // (mm) Length to extrude after loading. + #define ADVANCED_PAUSE_PURGE_LENGTH 25 // (mm) Length to extrude after loading. // Set to 0 for manual extrusion. // Filament can be extruded repeatedly from the Filament Change menu // until extrusion is consistent, and to purge old filament. @@ -2352,7 +2355,7 @@ //#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. //#define HOME_BEFORE_FILAMENT_CHANGE // If needed, home before parking for filament change - //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. + #define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) #endif diff --git a/config/examples/AliExpress/CL-260/Configuration.h b/config/examples/AliExpress/CL-260/Configuration.h index 78c2dc9160..56f4d0c34d 100644 --- a/config/examples/AliExpress/CL-260/Configuration.h +++ b/config/examples/AliExpress/CL-260/Configuration.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "AliExpress/CL-260" + /** * Configuration.h * @@ -69,7 +71,7 @@ // @section info // Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes. +#define STRING_CONFIG_H_AUTHOR "(none, CL-260)" // Who made the changes. //#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) /** @@ -138,7 +140,7 @@ #endif // Name displayed in the LCD "Ready" message and Info menu -//#define CUSTOM_MACHINE_NAME "3D Printer" +#define CUSTOM_MACHINE_NAME "CL-260" // Printer's unique ID, used by some programs to differentiate between machines. // Choose your own or use a service like https://www.uuidgenerator.net/version4 @@ -424,7 +426,7 @@ #define TEMP_SENSOR_5 0 #define TEMP_SENSOR_6 0 #define TEMP_SENSOR_7 0 -#define TEMP_SENSOR_BED 0 +#define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 #define TEMP_SENSOR_COOLER 0 @@ -634,7 +636,7 @@ * Note: For Bowden Extruders make this large enough to allow load/unload. */ #define PREVENT_LENGTHY_EXTRUDE -#define EXTRUDE_MAXLENGTH 200 +#define EXTRUDE_MAXLENGTH 800 //=========================================================================== //======================== Thermal Runaway Protection ======================= @@ -684,10 +686,10 @@ // Almost all printers will be using one per axis. Probes will use one or more of the // extra connectors. Leave undefined any used for non-endstop and non-probe purposes. #define USE_XMIN_PLUG -#define USE_YMIN_PLUG +//#define USE_YMIN_PLUG #define USE_ZMIN_PLUG //#define USE_XMAX_PLUG -//#define USE_YMAX_PLUG +#define USE_YMAX_PLUG //#define USE_ZMAX_PLUG // Enable pullup for all endstops to prevent a floating state @@ -717,12 +719,12 @@ #endif // Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define X_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. +#define X_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Y_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Z_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define X_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Y_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Z_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. #define Z_MIN_PROBE_ENDSTOP_INVERTING false // Set to true to invert the logic of the probe. /** @@ -806,7 +808,7 @@ * Override with M92 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 500 } +#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 160.6 } /** * Default Max Feed Rate (mm/s) @@ -1197,7 +1199,7 @@ // @section extruder // For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR false +#define INVERT_E0_DIR true #define INVERT_E1_DIR false #define INVERT_E2_DIR false #define INVERT_E3_DIR false @@ -1226,14 +1228,14 @@ // Direction of endstops when homing; 1=MAX, -1=MIN // :[-1,1] #define X_HOME_DIR -1 -#define Y_HOME_DIR -1 +#define Y_HOME_DIR 1 #define Z_HOME_DIR -1 // @section machine // The size of the printable area -#define X_BED_SIZE 200 -#define Y_BED_SIZE 200 +#define X_BED_SIZE 220 +#define Y_BED_SIZE 220 // Travel limits (mm) after homing, corresponding to endstop positions. #define X_MIN_POS 0 @@ -1241,7 +1243,7 @@ #define Z_MIN_POS 0 #define X_MAX_POS X_BED_SIZE #define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 200 +#define Z_MAX_POS 260 /** * Software Endstops @@ -1936,7 +1938,7 @@ * SD Card support is disabled by default. If your controller has an SD slot, * you must uncomment the following option or it won't work. */ -//#define SDSUPPORT +#define SDSUPPORT /** * SD CARD: ENABLE CRC @@ -2037,7 +2039,7 @@ // // Note: Usually sold with a white PCB. // -//#define REPRAP_DISCOUNT_SMART_CONTROLLER +#define REPRAP_DISCOUNT_SMART_CONTROLLER // // GT2560 (YHCB2004) LCD Display diff --git a/config/examples/AliExpress/UM2pExt/Configuration.h b/config/examples/AliExpress/UM2pExt/Configuration.h index 78c2dc9160..04fbf842dd 100644 --- a/config/examples/AliExpress/UM2pExt/Configuration.h +++ b/config/examples/AliExpress/UM2pExt/Configuration.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "AliExpress/UM2pExt" + /** * Configuration.h * @@ -134,7 +136,7 @@ // Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_RAMPS_14_EFB + #define MOTHERBOARD BOARD_ULTIMAIN_2 #endif // Name displayed in the LCD "Ready" message and Info menu @@ -148,10 +150,10 @@ // This defines the number of extruders // :[0, 1, 2, 3, 4, 5, 6, 7, 8] -#define EXTRUDERS 1 +#define EXTRUDERS 2 // Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc. -#define DEFAULT_NOMINAL_FILAMENT_DIA 1.75 +#define DEFAULT_NOMINAL_FILAMENT_DIA 2.85 // For Cyclops or any "multi-extruder" that shares a single nozzle. //#define SINGLENOZZLE @@ -416,15 +418,15 @@ * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. */ -#define TEMP_SENSOR_0 1 -#define TEMP_SENSOR_1 0 +#define TEMP_SENSOR_0 20 +#define TEMP_SENSOR_1 20 #define TEMP_SENSOR_2 0 #define TEMP_SENSOR_3 0 #define TEMP_SENSOR_4 0 #define TEMP_SENSOR_5 0 #define TEMP_SENSOR_6 0 #define TEMP_SENSOR_7 0 -#define TEMP_SENSOR_BED 0 +#define TEMP_SENSOR_BED 20 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 #define TEMP_SENSOR_COOLER 0 @@ -480,7 +482,7 @@ #define HEATER_5_MAXTEMP 275 #define HEATER_6_MAXTEMP 275 #define HEATER_7_MAXTEMP 275 -#define BED_MAXTEMP 150 +#define BED_MAXTEMP 130 #define CHAMBER_MAXTEMP 60 /** @@ -510,16 +512,17 @@ //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) // Set/get with gcode: M301 E[extruder number, 0-2] + // Ultimaker2+ #if ENABLED(PID_PARAMS_PER_HOTEND) // Specify between 1 and HOTENDS values per array. // If fewer than EXTRUDER values are provided, the last element will be repeated. - #define DEFAULT_Kp_LIST { 22.20, 22.20 } - #define DEFAULT_Ki_LIST { 1.08, 1.08 } - #define DEFAULT_Kd_LIST { 114.00, 114.00 } + #define DEFAULT_Kp_LIST { 9.74, 9.74 } + #define DEFAULT_Ki_LIST { 0.69, 0.69 } + #define DEFAULT_Kd_LIST { 34.32, 34.32 } #else - #define DEFAULT_Kp 22.20 - #define DEFAULT_Ki 1.08 - #define DEFAULT_Kd 114.00 + #define DEFAULT_Kp 9.74 + #define DEFAULT_Ki 0.69 + #define DEFAULT_Kd 34.32 #endif #endif // PIDTEMP @@ -634,7 +637,7 @@ * Note: For Bowden Extruders make this large enough to allow load/unload. */ #define PREVENT_LENGTHY_EXTRUDE -#define EXTRUDE_MAXLENGTH 200 +#define EXTRUDE_MAXLENGTH 1000 //=========================================================================== //======================== Thermal Runaway Protection ======================= @@ -684,11 +687,11 @@ // Almost all printers will be using one per axis. Probes will use one or more of the // extra connectors. Leave undefined any used for non-endstop and non-probe purposes. #define USE_XMIN_PLUG -#define USE_YMIN_PLUG -#define USE_ZMIN_PLUG +//#define USE_YMIN_PLUG +//#define USE_ZMIN_PLUG //#define USE_XMAX_PLUG -//#define USE_YMAX_PLUG -//#define USE_ZMAX_PLUG +#define USE_YMAX_PLUG +#define USE_ZMAX_PLUG // Enable pullup for all endstops to prevent a floating state #define ENDSTOPPULLUPS @@ -717,13 +720,13 @@ #endif // Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define X_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_PROBE_ENDSTOP_INVERTING false // Set to true to invert the logic of the probe. +#define X_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Y_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Z_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define X_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Y_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Z_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Z_MIN_PROBE_ENDSTOP_INVERTING true // Set to true to invert the logic of the probe. /** * Stepper Drivers @@ -752,7 +755,7 @@ //#define Z3_DRIVER_TYPE A4988 //#define Z4_DRIVER_TYPE A4988 #define E0_DRIVER_TYPE A4988 -//#define E1_DRIVER_TYPE A4988 +#define E1_DRIVER_TYPE A4988 //#define E2_DRIVER_TYPE A4988 //#define E3_DRIVER_TYPE A4988 //#define E4_DRIVER_TYPE A4988 @@ -806,14 +809,14 @@ * Override with M92 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 500 } +#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 200, 355 } /** * Default Max Feed Rate (mm/s) * Override with M203 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 } +#define DEFAULT_MAX_FEEDRATE { 300, 300, 40, 45} //#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 #if ENABLED(LIMITED_MAX_FR_EDITING) @@ -940,7 +943,7 @@ * Use G29 repeatedly, adjusting the Z height at each point with movement commands * or (with LCD_BED_LEVELING) the LCD controller. */ -//#define PROBE_MANUALLY +#define PROBE_MANUALLY /** * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. @@ -1065,7 +1068,7 @@ #define XY_PROBE_FEEDRATE (133*60) // Feedrate (mm/min) for the first approach when double-probing (MULTIPLE_PROBING == 2) -#define Z_PROBE_FEEDRATE_FAST (4*60) +#define Z_PROBE_FEEDRATE_FAST (40*60) // Feedrate (mm/min) for the "accurate" probe of each point #define Z_PROBE_FEEDRATE_SLOW (Z_PROBE_FEEDRATE_FAST / 2) @@ -1190,15 +1193,15 @@ // @section machine // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR false -#define INVERT_Y_DIR true -#define INVERT_Z_DIR false +#define INVERT_X_DIR true +#define INVERT_Y_DIR false +#define INVERT_Z_DIR true // @section extruder // For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR false -#define INVERT_E1_DIR false +#define INVERT_E0_DIR true +#define INVERT_E1_DIR true #define INVERT_E2_DIR false #define INVERT_E3_DIR false #define INVERT_E4_DIR false @@ -1226,14 +1229,14 @@ // Direction of endstops when homing; 1=MAX, -1=MIN // :[-1,1] #define X_HOME_DIR -1 -#define Y_HOME_DIR -1 -#define Z_HOME_DIR -1 +#define Y_HOME_DIR 1 +#define Z_HOME_DIR 1 // @section machine // The size of the printable area -#define X_BED_SIZE 200 -#define Y_BED_SIZE 200 +#define X_BED_SIZE 220 +#define Y_BED_SIZE 220 // Travel limits (mm) after homing, corresponding to endstop positions. #define X_MIN_POS 0 @@ -1241,7 +1244,7 @@ #define Z_MIN_POS 0 #define X_MAX_POS X_BED_SIZE #define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 200 +#define Z_MAX_POS 300 /** * Software Endstops @@ -1269,7 +1272,7 @@ #endif #if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS) - //#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD + #define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD #endif /** @@ -1389,14 +1392,14 @@ //#define AUTO_BED_LEVELING_LINEAR //#define AUTO_BED_LEVELING_BILINEAR //#define AUTO_BED_LEVELING_UBL -//#define MESH_BED_LEVELING +#define MESH_BED_LEVELING /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable * leveling immediately after G28. */ -//#define RESTORE_LEVELING_AFTER_G28 +#define RESTORE_LEVELING_AFTER_G28 //#define ENABLE_LEVELING_AFTER_G28 /** @@ -1438,7 +1441,7 @@ /** * Enable the G26 Mesh Validation Pattern tool. */ - //#define G26_MESH_VALIDATION + #define G26_MESH_VALIDATION #if ENABLED(G26_MESH_VALIDATION) #define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle. #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for G26. @@ -1518,7 +1521,7 @@ * Add a bed leveling sub-menu for ABL or MBL. * Include a guided procedure if manual probing is enabled. */ -//#define LCD_BED_LEVELING +#define LCD_BED_LEVELING #if ENABLED(LCD_BED_LEVELING) #define MESH_EDIT_Z_STEP 0.025 // (mm) Step size while manually probing Z axis. @@ -1527,7 +1530,7 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS +#define LEVEL_BED_CORNERS #if ENABLED(LEVEL_BED_CORNERS) #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets @@ -1595,7 +1598,7 @@ #endif // Homing speeds (mm/min) -#define HOMING_FEEDRATE_MM_M { (50*60), (50*60), (4*60) } +#define HOMING_FEEDRATE_MM_M { (100*60), (100*60), (40*60) } // Validate that endstops are triggered on homing moves #define VALIDATE_HOMING_ENDSTOPS @@ -1728,7 +1731,7 @@ * P1 Raise the nozzle always to Z-park height. * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. */ -//#define NOZZLE_PARK_FEATURE +#define NOZZLE_PARK_FEATURE #if ENABLED(NOZZLE_PARK_FEATURE) // Specify a park position as { X, Y, Z_raise } @@ -1777,7 +1780,7 @@ * Caveats: The ending Z should be the same as starting Z. * Attention: EXPERIMENTAL. G-code arguments may change. */ -//#define NOZZLE_CLEAN_FEATURE +#define NOZZLE_CLEAN_FEATURE #if ENABLED(NOZZLE_CLEAN_FEATURE) // Default number of pattern repetitions @@ -1788,8 +1791,8 @@ // Specify positions for each tool as { { X, Y, Z }, { X, Y, Z } } // Dual hotend system may use { { -20, (Y_BED_SIZE / 2), (Z_MIN_POS + 1) }, { 420, (Y_BED_SIZE / 2), (Z_MIN_POS + 1) }} - #define NOZZLE_CLEAN_START_POINT { { 30, 30, (Z_MIN_POS + 1) } } - #define NOZZLE_CLEAN_END_POINT { { 100, 60, (Z_MIN_POS + 1) } } + #define NOZZLE_CLEAN_START_POINT { { 30, 30, (Z_MIN_POS + 1) }, { 30, 30, (Z_MIN_POS + 1) } } + #define NOZZLE_CLEAN_END_POINT { { 100, 60, (Z_MIN_POS + 1) }, { 100, 60, (Z_MIN_POS + 1) } } // Circular pattern radius #define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5 @@ -1921,7 +1924,7 @@ * * :['JAPANESE', 'WESTERN', 'CYRILLIC'] */ -#define DISPLAY_CHARSET_HD44780 JAPANESE +#define DISPLAY_CHARSET_HD44780 CYRILLIC /** * Info Screen Style (0:Classic, 1:Průša) @@ -1936,14 +1939,14 @@ * SD Card support is disabled by default. If your controller has an SD slot, * you must uncomment the following option or it won't work. */ -//#define SDSUPPORT +#define SDSUPPORT /** * SD CARD: ENABLE CRC * * Use CRC checks and retries on the SD communication. */ -//#define SD_CHECK_AND_RETRY +#define SD_CHECK_AND_RETRY /** * LCD Menu Items @@ -1983,7 +1986,7 @@ // // Set this option if CLOCKWISE causes values to DECREASE // -//#define REVERSE_ENCODER_DIRECTION +#define REVERSE_ENCODER_DIRECTION // // This option reverses the encoder direction for navigating LCD menus. @@ -2255,7 +2258,7 @@ // Original Ulticontroller from Ultimaker 2 printer with SSD1309 I2C display and encoder // https://github.com/Ultimaker/Ultimaker2/tree/master/1249_Ulticontroller_Board_(x1) // -//#define ULTI_CONTROLLER +#define ULTI_CONTROLLER // // MKS MINI12864 with graphic controller and SD support diff --git a/config/examples/AliExpress/UM2pExt/Configuration_adv.h b/config/examples/AliExpress/UM2pExt/Configuration_adv.h index 5335fa012a..f2c754b713 100644 --- a/config/examples/AliExpress/UM2pExt/Configuration_adv.h +++ b/config/examples/AliExpress/UM2pExt/Configuration_adv.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "AliExpress/UM2pExt" + /** * Configuration_adv.h * @@ -479,7 +481,7 @@ // When first starting the main fan, run it at full speed for the // given number of milliseconds. This gets the fan spinning reliably // before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) -//#define FAN_KICKSTART_TIME 100 +#define FAN_KICKSTART_TIME 100 // Some coolers may require a non-zero "off" state. //#define FAN_OFF_PWM 1 @@ -540,7 +542,7 @@ * Multiple extruders can be assigned to the same pin in which case * the fan will turn on when any selected extruder is above the threshold. */ -#define E0_AUTO_FAN_PIN -1 +//#define E0_AUTO_FAN_PIN -1 #define E1_AUTO_FAN_PIN -1 #define E2_AUTO_FAN_PIN -1 #define E3_AUTO_FAN_PIN -1 @@ -573,15 +575,15 @@ /** * M355 Case Light on-off / brightness */ -//#define CASE_LIGHT_ENABLE +#define CASE_LIGHT_ENABLE #if ENABLED(CASE_LIGHT_ENABLE) //#define CASE_LIGHT_PIN 4 // Override the default pin if needed #define INVERT_CASE_LIGHT false // Set true if Case Light is ON when pin is LOW #define CASE_LIGHT_DEFAULT_ON true // Set default power-up state on - #define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // Set default power-up brightness (0-255, requires PWM pin) + #define CASE_LIGHT_DEFAULT_BRIGHTNESS 255 // Set default power-up brightness (0-255, requires PWM pin) //#define CASE_LIGHT_NO_BRIGHTNESS // Disable brightness control. Enable for non-PWM lighting. //#define CASE_LIGHT_MAX_PWM 128 // Limit PWM duty cycle (0-255) - //#define CASE_LIGHT_MENU // Add Case Light options to the LCD menu + #define CASE_LIGHT_MENU // Add Case Light options to the LCD menu #if ENABLED(NEOPIXEL_LED) //#define CASE_LIGHT_USE_NEOPIXEL // Use NeoPixel LED as case light #endif @@ -597,7 +599,7 @@ // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. -//#define ENDSTOPS_ALWAYS_ON_DEFAULT +#define ENDSTOPS_ALWAYS_ON_DEFAULT // @section extras @@ -713,7 +715,7 @@ // Remember: you should set the second extruder x-offset to 0 in your slicer. // This is the default power-up mode which can be later using M605. - #define DEFAULT_DUAL_X_CARRIAGE_MODE DXC_AUTO_PARK_MODE + #define DEFAULT_DUAL_X_CARRIAGE_MODE DXC_FULL_CONTROL_MODE // Default x offset in duplication mode (typically set to half print bed width) #define DEFAULT_DUPLICATION_X_OFFSET 100 @@ -867,7 +869,7 @@ // On a 300mm bed a 5% grade would give a misalignment of ~1.5cm #define G34_MAX_GRADE 5 // (%) Maximum incline that G34 will handle - #define Z_STEPPER_ALIGN_ITERATIONS 5 // Number of iterations to apply during alignment + #define Z_STEPPER_ALIGN_ITERATIONS 3 // Number of iterations to apply during alignment #define Z_STEPPER_ALIGN_ACC 0.02 // Stop iterating early if the accuracy is better than this #define RESTORE_LEVELING_AFTER_G34 // Restore leveling after G34 is done? // After G34, re-home Z (G28 Z) or just calculate it from the last probe heights? @@ -1059,7 +1061,7 @@ * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the * lowest stepping frequencies. */ -//#define ADAPTIVE_STEP_SMOOTHING +#define ADAPTIVE_STEP_SMOOTHING /** * Custom Microstepping @@ -1095,7 +1097,7 @@ * M908 - BQ_ZUM_MEGA_3D, RAMBO, PRINTRBOARD_REVF, RIGIDBOARD_V2 & SCOOVO_X9H * M909, M910 & LCD - only PRINTRBOARD_REVF & RIGIDBOARD_V2 */ -//#define PWM_MOTOR_CURRENT { 1300, 1300, 1250 } // Values in milliamps +#define PWM_MOTOR_CURRENT { 1200, 1200, 1250 } // Values in milliamps //#define DIGIPOT_MOTOR_CURRENT { 135,135,135,135,135 } // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A) //#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis @@ -1175,7 +1177,7 @@ #endif // Include a page of printer information in the LCD Main Menu - //#define LCD_INFO_MENU + #define LCD_INFO_MENU #if ENABLED(LCD_INFO_MENU) //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages #endif @@ -1301,7 +1303,7 @@ //#define BROWSE_MEDIA_ON_INSERT // Open the file browser when media is inserted - #define EVENT_GCODE_SD_ABORT "G28XY" // G-code to run on SD Abort Print (e.g., "G28XY" or "G27") + #define EVENT_GCODE_SD_ABORT "G27" // G-code to run on SD Abort Print (e.g., "G28XY" or "G27") #if ENABLED(PRINTER_EVENT_LEDS) #define PE_LEDS_COMPLETED_TIME (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination @@ -1394,7 +1396,7 @@ * This feature must be enabled with "M540 S1" or from the LCD menu. * To have any effect, endstops must be enabled during SD printing. */ - //#define SD_ABORT_ON_ENDSTOP_HIT + #define SD_ABORT_ON_ENDSTOP_HIT /** * This option makes it easier to print the same SD Card file again. @@ -2100,7 +2102,7 @@ // For debug-echo: 128 bytes for the optimal speed. // Other output doesn't need to be that speedy. // :[0, 2, 4, 8, 16, 32, 64, 128, 256] -#define TX_BUFFER_SIZE 0 +#define TX_BUFFER_SIZE 128 // Host Receive Buffer Size // Without XON/XOFF flow control (see SERIAL_XON_XOFF below) 32 bytes should be enough. @@ -2204,7 +2206,7 @@ * * Note that M207 / M208 / M209 settings are saved to EEPROM. */ -//#define FWRETRACT +#define FWRETRACT #if ENABLED(FWRETRACT) #define FWRETRACT_AUTORETRACT // Override slicer retractions #if ENABLED(FWRETRACT_AUTORETRACT) @@ -2311,28 +2313,30 @@ * * Enable PARK_HEAD_ON_PAUSE to add the G-code M125 Pause and Park. */ -//#define ADVANCED_PAUSE_FEATURE +#define ADVANCED_PAUSE_FEATURE #if ENABLED(ADVANCED_PAUSE_FEATURE) + #define FILAMENT_BOWDEN_LENGTH 705 // (mm) + #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. // This short retract is done immediately, before parking the nozzle. - #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast. + #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 80 // (mm/s) Unload filament feedrate. This can be pretty fast. #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload. + #define FILAMENT_CHANGE_UNLOAD_LENGTH (FILAMENT_BOWDEN_LENGTH + 50) // (mm) The length of filament for a complete unload. // For Bowden, the full length of the tube and nozzle. // For direct drive, the full length of the nozzle. // Set to 0 for manual unloading. #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE 6 // (mm/s) Slow move when starting load. #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 0 // (mm) Slow length, to allow time to insert material. // 0 to disable start loading and skip to fast load only - #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast. + #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 80 // (mm/s) Load filament feedrate. This can be pretty fast. #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle. + #define FILAMENT_CHANGE_FAST_LOAD_LENGTH (FILAMENT_BOWDEN_LENGTH - 50) // (mm) Load length of filament, from extruder gear to nozzle. // For Bowden, the full length of the tube and nozzle. // For direct drive, the full length of the nozzle. //#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted. #define ADVANCED_PAUSE_PURGE_FEEDRATE 3 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate. - #define ADVANCED_PAUSE_PURGE_LENGTH 50 // (mm) Length to extrude after loading. + #define ADVANCED_PAUSE_PURGE_LENGTH 0 // (mm) Length to extrude after loading. // Set to 0 for manual extrusion. // Filament can be extruded repeatedly from the Filament Change menu // until extrusion is consistent, and to purge old filament. @@ -2349,7 +2353,7 @@ #define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed. #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change. - //#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. + #define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. //#define HOME_BEFORE_FILAMENT_CHANGE // If needed, home before parking for filament change //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. @@ -3439,7 +3443,7 @@ /** * Disable all Volumetric extrusion options */ -//#define NO_VOLUMETRICS +#define NO_VOLUMETRICS #if DISABLED(NO_VOLUMETRICS) /** diff --git a/config/examples/Anet/A2/Configuration.h b/config/examples/Anet/A2/Configuration.h index 78c2dc9160..8665d69682 100644 --- a/config/examples/Anet/A2/Configuration.h +++ b/config/examples/Anet/A2/Configuration.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Anet/A2" + /** * Configuration.h * @@ -69,7 +71,7 @@ // @section info // Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes. +#define STRING_CONFIG_H_AUTHOR "(Modmike, Anet A2)" // Who made the changes. //#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) /** @@ -134,11 +136,11 @@ // Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_RAMPS_14_EFB + #define MOTHERBOARD BOARD_ANET_10 #endif // Name displayed in the LCD "Ready" message and Info menu -//#define CUSTOM_MACHINE_NAME "3D Printer" +#define CUSTOM_MACHINE_NAME "Anet A2" // Printer's unique ID, used by some programs to differentiate between machines. // Choose your own or use a service like https://www.uuidgenerator.net/version4 @@ -416,7 +418,7 @@ * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. */ -#define TEMP_SENSOR_0 1 +#define TEMP_SENSOR_0 5 #define TEMP_SENSOR_1 0 #define TEMP_SENSOR_2 0 #define TEMP_SENSOR_3 0 @@ -424,7 +426,7 @@ #define TEMP_SENSOR_5 0 #define TEMP_SENSOR_6 0 #define TEMP_SENSOR_7 0 -#define TEMP_SENSOR_BED 0 +#define TEMP_SENSOR_BED 5 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 #define TEMP_SENSOR_COOLER 0 @@ -717,9 +719,9 @@ #endif // Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. +#define X_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Y_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Z_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. #define X_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. #define Y_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. #define Z_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. @@ -762,7 +764,7 @@ // Enable this feature if all enabled endstop pins are interrupt-capable. // This will remove the need to poll the interrupt pins, saving many CPU cycles. -//#define ENDSTOP_INTERRUPTS_FEATURE +#define ENDSTOP_INTERRUPTS_FEATURE /** * Endstop Noise Threshold @@ -806,7 +808,7 @@ * Override with M92 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 500 } +#define DEFAULT_AXIS_STEPS_PER_UNIT { 100, 100, 400, 95 } /** * Default Max Feed Rate (mm/s) @@ -906,7 +908,7 @@ * The probe replaces the Z-MIN endstop and is used for Z homing. * (Automatically enables USE_PROBE_FOR_Z_HOMING.) */ -#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN +//#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN // Force the use of the probe for Z-axis homing //#define USE_PROBE_FOR_Z_HOMING @@ -1055,20 +1057,20 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +//#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } // Most probes should stay away from the edges of the bed, but // with NOZZLE_AS_PROBE this can be negative for a wider probing area. -#define PROBING_MARGIN 10 +//#define PROBING_MARGIN 10 // X and Y axis travel speed (mm/min) between probes -#define XY_PROBE_FEEDRATE (133*60) +//#define XY_PROBE_FEEDRATE (133*60) // Feedrate (mm/min) for the first approach when double-probing (MULTIPLE_PROBING == 2) -#define Z_PROBE_FEEDRATE_FAST (4*60) +//#define Z_PROBE_FEEDRATE_FAST (4*60) // Feedrate (mm/min) for the "accurate" probe of each point -#define Z_PROBE_FEEDRATE_SLOW (Z_PROBE_FEEDRATE_FAST / 2) +//#define Z_PROBE_FEEDRATE_SLOW (Z_PROBE_FEEDRATE_FAST / 2) /** * Probe Activation Switch @@ -1190,14 +1192,14 @@ // @section machine // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR false -#define INVERT_Y_DIR true -#define INVERT_Z_DIR false +#define INVERT_X_DIR true +#define INVERT_Y_DIR false +#define INVERT_Z_DIR true // @section extruder // For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR false +#define INVERT_E0_DIR true #define INVERT_E1_DIR false #define INVERT_E2_DIR false #define INVERT_E3_DIR false @@ -1232,8 +1234,8 @@ // @section machine // The size of the printable area -#define X_BED_SIZE 200 -#define Y_BED_SIZE 200 +#define X_BED_SIZE 220 +#define Y_BED_SIZE 220 // Travel limits (mm) after homing, corresponding to endstop positions. #define X_MIN_POS 0 @@ -1527,7 +1529,7 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS +#define LEVEL_BED_CORNERS #if ENABLED(LEVEL_BED_CORNERS) #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets @@ -1672,7 +1674,7 @@ * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) */ -//#define EEPROM_SETTINGS // Persistent storage with M500 and M501 +#define EEPROM_SETTINGS // Persistent storage with M500 and M501 //#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. #define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load @@ -1706,14 +1708,14 @@ // Preheat Constants - Up to 5 are supported without changes // #define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 180 -#define PREHEAT_1_TEMP_BED 70 +#define PREHEAT_1_TEMP_HOTEND 200 +#define PREHEAT_1_TEMP_BED 60 #define PREHEAT_1_TEMP_CHAMBER 35 #define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 #define PREHEAT_2_LABEL "ABS" -#define PREHEAT_2_TEMP_HOTEND 240 -#define PREHEAT_2_TEMP_BED 110 +#define PREHEAT_2_TEMP_HOTEND 230 +#define PREHEAT_2_TEMP_BED 100 #define PREHEAT_2_TEMP_CHAMBER 35 #define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 @@ -2195,6 +2197,8 @@ // RepRapDiscount FULL GRAPHIC Smart Controller // https://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller // +// Note: Details on connecting to the Anet V1.0 controller are in the file pins_ANET_10.h +// //#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER // @@ -2301,7 +2305,7 @@ // A clone of the RepRapDiscount full graphics display but with // different pins/wiring (see pins_ANET_10.h). Enable one of these. // -//#define ANET_FULL_GRAPHICS_LCD +#define ANET_FULL_GRAPHICS_LCD //#define ANET_FULL_GRAPHICS_LCD_ALT_WIRING // diff --git a/config/examples/Anet/A2/Configuration_adv.h b/config/examples/Anet/A2/Configuration_adv.h index 5335fa012a..d98fd2ef3b 100644 --- a/config/examples/Anet/A2/Configuration_adv.h +++ b/config/examples/Anet/A2/Configuration_adv.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Anet/A2" + /** * Configuration_adv.h * @@ -867,7 +869,7 @@ // On a 300mm bed a 5% grade would give a misalignment of ~1.5cm #define G34_MAX_GRADE 5 // (%) Maximum incline that G34 will handle - #define Z_STEPPER_ALIGN_ITERATIONS 5 // Number of iterations to apply during alignment + #define Z_STEPPER_ALIGN_ITERATIONS 3 // Number of iterations to apply during alignment #define Z_STEPPER_ALIGN_ACC 0.02 // Stop iterating early if the accuracy is better than this #define RESTORE_LEVELING_AFTER_G34 // Restore leveling after G34 is done? // After G34, re-home Z (G28 Z) or just calculate it from the last probe heights? @@ -1790,7 +1792,7 @@ * * Warning: Does not respect endstops! */ -//#define BABYSTEPPING +#define BABYSTEPPING #if ENABLED(BABYSTEPPING) //#define INTEGRATED_BABYSTEPPING // EXPERIMENTAL integration of babystepping into the Stepper ISR //#define BABYSTEP_WITHOUT_HOMING diff --git a/config/examples/Anet/A2plus/Configuration.h b/config/examples/Anet/A2plus/Configuration.h index 78c2dc9160..42a12e93d9 100644 --- a/config/examples/Anet/A2plus/Configuration.h +++ b/config/examples/Anet/A2plus/Configuration.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Anet/A2plus" + /** * Configuration.h * @@ -69,7 +71,7 @@ // @section info // Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes. +#define STRING_CONFIG_H_AUTHOR "(Modmike, Anet A2 Plus)" // Who made the changes. //#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) /** @@ -134,11 +136,11 @@ // Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_RAMPS_14_EFB + #define MOTHERBOARD BOARD_ANET_10 #endif // Name displayed in the LCD "Ready" message and Info menu -//#define CUSTOM_MACHINE_NAME "3D Printer" +#define CUSTOM_MACHINE_NAME "Anet A2+" // Printer's unique ID, used by some programs to differentiate between machines. // Choose your own or use a service like https://www.uuidgenerator.net/version4 @@ -416,7 +418,7 @@ * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. */ -#define TEMP_SENSOR_0 1 +#define TEMP_SENSOR_0 5 #define TEMP_SENSOR_1 0 #define TEMP_SENSOR_2 0 #define TEMP_SENSOR_3 0 @@ -424,7 +426,7 @@ #define TEMP_SENSOR_5 0 #define TEMP_SENSOR_6 0 #define TEMP_SENSOR_7 0 -#define TEMP_SENSOR_BED 0 +#define TEMP_SENSOR_BED 5 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 #define TEMP_SENSOR_COOLER 0 @@ -717,9 +719,9 @@ #endif // Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. +#define X_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Y_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Z_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. #define X_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. #define Y_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. #define Z_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. @@ -762,7 +764,7 @@ // Enable this feature if all enabled endstop pins are interrupt-capable. // This will remove the need to poll the interrupt pins, saving many CPU cycles. -//#define ENDSTOP_INTERRUPTS_FEATURE +#define ENDSTOP_INTERRUPTS_FEATURE /** * Endstop Noise Threshold @@ -806,7 +808,7 @@ * Override with M92 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 500 } +#define DEFAULT_AXIS_STEPS_PER_UNIT { 100, 100, 400, 95 } /** * Default Max Feed Rate (mm/s) @@ -906,7 +908,7 @@ * The probe replaces the Z-MIN endstop and is used for Z homing. * (Automatically enables USE_PROBE_FOR_Z_HOMING.) */ -#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN +//#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN // Force the use of the probe for Z-axis homing //#define USE_PROBE_FOR_Z_HOMING @@ -1055,20 +1057,20 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +//#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } // Most probes should stay away from the edges of the bed, but // with NOZZLE_AS_PROBE this can be negative for a wider probing area. -#define PROBING_MARGIN 10 +//#define PROBING_MARGIN 10 // X and Y axis travel speed (mm/min) between probes -#define XY_PROBE_FEEDRATE (133*60) +//#define XY_PROBE_FEEDRATE (133*60) // Feedrate (mm/min) for the first approach when double-probing (MULTIPLE_PROBING == 2) -#define Z_PROBE_FEEDRATE_FAST (4*60) +//#define Z_PROBE_FEEDRATE_FAST (4*60) // Feedrate (mm/min) for the "accurate" probe of each point -#define Z_PROBE_FEEDRATE_SLOW (Z_PROBE_FEEDRATE_FAST / 2) +//#define Z_PROBE_FEEDRATE_SLOW (Z_PROBE_FEEDRATE_FAST / 2) /** * Probe Activation Switch @@ -1190,14 +1192,14 @@ // @section machine // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR false -#define INVERT_Y_DIR true -#define INVERT_Z_DIR false +#define INVERT_X_DIR true +#define INVERT_Y_DIR false +#define INVERT_Z_DIR true // @section extruder // For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR false +#define INVERT_E0_DIR true #define INVERT_E1_DIR false #define INVERT_E2_DIR false #define INVERT_E3_DIR false @@ -1232,8 +1234,8 @@ // @section machine // The size of the printable area -#define X_BED_SIZE 200 -#define Y_BED_SIZE 200 +#define X_BED_SIZE 220 +#define Y_BED_SIZE 270 // Travel limits (mm) after homing, corresponding to endstop positions. #define X_MIN_POS 0 @@ -1527,7 +1529,7 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS +#define LEVEL_BED_CORNERS #if ENABLED(LEVEL_BED_CORNERS) #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets @@ -1672,7 +1674,7 @@ * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) */ -//#define EEPROM_SETTINGS // Persistent storage with M500 and M501 +#define EEPROM_SETTINGS // Persistent storage with M500 and M501 //#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. #define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load @@ -1706,14 +1708,14 @@ // Preheat Constants - Up to 5 are supported without changes // #define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 180 -#define PREHEAT_1_TEMP_BED 70 +#define PREHEAT_1_TEMP_HOTEND 200 +#define PREHEAT_1_TEMP_BED 60 #define PREHEAT_1_TEMP_CHAMBER 35 #define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 #define PREHEAT_2_LABEL "ABS" -#define PREHEAT_2_TEMP_HOTEND 240 -#define PREHEAT_2_TEMP_BED 110 +#define PREHEAT_2_TEMP_HOTEND 230 +#define PREHEAT_2_TEMP_BED 100 #define PREHEAT_2_TEMP_CHAMBER 35 #define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 @@ -2195,6 +2197,8 @@ // RepRapDiscount FULL GRAPHIC Smart Controller // https://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller // +// Note: Details on connecting to the Anet V1.0 controller are in the file pins_ANET_10.h +// //#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER // @@ -2301,7 +2305,7 @@ // A clone of the RepRapDiscount full graphics display but with // different pins/wiring (see pins_ANET_10.h). Enable one of these. // -//#define ANET_FULL_GRAPHICS_LCD +#define ANET_FULL_GRAPHICS_LCD //#define ANET_FULL_GRAPHICS_LCD_ALT_WIRING // diff --git a/config/examples/Anet/A2plus/Configuration_adv.h b/config/examples/Anet/A2plus/Configuration_adv.h index 5335fa012a..9738649b37 100644 --- a/config/examples/Anet/A2plus/Configuration_adv.h +++ b/config/examples/Anet/A2plus/Configuration_adv.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Anet/A2plus" + /** * Configuration_adv.h * @@ -867,7 +869,7 @@ // On a 300mm bed a 5% grade would give a misalignment of ~1.5cm #define G34_MAX_GRADE 5 // (%) Maximum incline that G34 will handle - #define Z_STEPPER_ALIGN_ITERATIONS 5 // Number of iterations to apply during alignment + #define Z_STEPPER_ALIGN_ITERATIONS 3 // Number of iterations to apply during alignment #define Z_STEPPER_ALIGN_ACC 0.02 // Stop iterating early if the accuracy is better than this #define RESTORE_LEVELING_AFTER_G34 // Restore leveling after G34 is done? // After G34, re-home Z (G28 Z) or just calculate it from the last probe heights? @@ -1790,7 +1792,7 @@ * * Warning: Does not respect endstops! */ -//#define BABYSTEPPING +#define BABYSTEPPING #if ENABLED(BABYSTEPPING) //#define INTEGRATED_BABYSTEPPING // EXPERIMENTAL integration of babystepping into the Stepper ISR //#define BABYSTEP_WITHOUT_HOMING diff --git a/config/examples/Anet/A6/Configuration.h b/config/examples/Anet/A6/Configuration.h index 78c2dc9160..05bd0f65b8 100644 --- a/config/examples/Anet/A6/Configuration.h +++ b/config/examples/Anet/A6/Configuration.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Anet/A6" + /** * Configuration.h * @@ -69,7 +71,7 @@ // @section info // Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes. +#define STRING_CONFIG_H_AUTHOR "(Ralf_E, ANET A6 config)" // Who made the changes. //#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) /** @@ -127,18 +129,18 @@ * * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ -#define BAUDRATE 250000 +#define BAUDRATE 115200 // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH // Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_RAMPS_14_EFB + #define MOTHERBOARD BOARD_ANET_10 #endif // Name displayed in the LCD "Ready" message and Info menu -//#define CUSTOM_MACHINE_NAME "3D Printer" +#define CUSTOM_MACHINE_NAME "Anet A6" // Printer's unique ID, used by some programs to differentiate between machines. // Choose your own or use a service like https://www.uuidgenerator.net/version4 @@ -150,7 +152,7 @@ // :[0, 1, 2, 3, 4, 5, 6, 7, 8] #define EXTRUDERS 1 -// Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc. +// The Anet A6 original extruder is designed for 1.75mm #define DEFAULT_NOMINAL_FILAMENT_DIA 1.75 // For Cyclops or any "multi-extruder" that shares a single nozzle. @@ -416,7 +418,7 @@ * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. */ -#define TEMP_SENSOR_0 1 +#define TEMP_SENSOR_0 11 #define TEMP_SENSOR_1 0 #define TEMP_SENSOR_2 0 #define TEMP_SENSOR_3 0 @@ -424,7 +426,7 @@ #define TEMP_SENSOR_5 0 #define TEMP_SENSOR_6 0 #define TEMP_SENSOR_7 0 -#define TEMP_SENSOR_BED 0 +#define TEMP_SENSOR_BED 11 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 #define TEMP_SENSOR_COOLER 0 @@ -480,7 +482,7 @@ #define HEATER_5_MAXTEMP 275 #define HEATER_6_MAXTEMP 275 #define HEATER_7_MAXTEMP 275 -#define BED_MAXTEMP 150 +#define BED_MAXTEMP 130 #define CHAMBER_MAXTEMP 60 /** @@ -510,16 +512,17 @@ //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) // Set/get with gcode: M301 E[extruder number, 0-2] + // Tuned by ralf-e. Always re-tune for your machine! #if ENABLED(PID_PARAMS_PER_HOTEND) // Specify between 1 and HOTENDS values per array. // If fewer than EXTRUDER values are provided, the last element will be repeated. - #define DEFAULT_Kp_LIST { 22.20, 22.20 } - #define DEFAULT_Ki_LIST { 1.08, 1.08 } - #define DEFAULT_Kd_LIST { 114.00, 114.00 } + #define DEFAULT_Kp_LIST { 16.83, 16.83 } + #define DEFAULT_Ki_LIST { 1.02, 1.02 } + #define DEFAULT_Kd_LIST { 69.29, 69.29 } #else - #define DEFAULT_Kp 22.20 - #define DEFAULT_Ki 1.08 - #define DEFAULT_Kd 114.00 + #define DEFAULT_Kp 16.83 + #define DEFAULT_Ki 1.02 + #define DEFAULT_Kd 69.29 #endif #endif // PIDTEMP @@ -540,7 +543,7 @@ * heater. If your configuration is significantly different than this and you don't understand * the issues involved, don't use bed PID until someone else verifies that your hardware works. */ -//#define PIDTEMPBED +#define PIDTEMPBED //#define BED_LIMIT_SWITCHING @@ -556,11 +559,11 @@ //#define MIN_BED_POWER 0 //#define PID_BED_DEBUG // Sends debug data to the serial port. - // 120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - // from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) - #define DEFAULT_bedKp 10.00 - #define DEFAULT_bedKi .023 - #define DEFAULT_bedKd 305.4 + // ANET A6 + // original Bed + 0.3mm Heat conducting into 4mm borosilicate (PID-Autotune: M303 E-1 S60 C5): + #define DEFAULT_bedKp 295.00 + #define DEFAULT_bedKi 35.65 + #define DEFAULT_bedKd 610.21 // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. #endif // PIDTEMPBED @@ -717,9 +720,9 @@ #endif // Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. +#define X_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Y_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Z_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. #define X_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. #define Y_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. #define Z_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. @@ -762,7 +765,7 @@ // Enable this feature if all enabled endstop pins are interrupt-capable. // This will remove the need to poll the interrupt pins, saving many CPU cycles. -//#define ENDSTOP_INTERRUPTS_FEATURE +#define ENDSTOP_INTERRUPTS_FEATURE /** * Endstop Noise Threshold @@ -806,14 +809,20 @@ * Override with M92 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 500 } +#define DEFAULT_AXIS_STEPS_PER_UNIT { 100, 100, 400, 95 } +//#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 95 } /** * Default Max Feed Rate (mm/s) * Override with M203 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 } +//#define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 } + +// ANET A6 Firmware V2.0 defaults (Vmax): +// Vmax x: 400, Vmax y: 400, Vmax z: 4, Vmax e: 25 +#define DEFAULT_MAX_FEEDRATE { 400, 400, 4, 25 } +//#define DEFAULT_MAX_FEEDRATE { 400, 400, 20, 50 } //#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 #if ENABLED(LIMITED_MAX_FR_EDITING) @@ -826,7 +835,12 @@ * Override with M201 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 } +//#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 } + +// ANET A6 Firmware V2.0 defaults (Amax): +// Amx x: 9000, Amax Y: 5000, Amax z: 50, Amax e: 10000 +#define DEFAULT_MAX_ACCELERATION { 9000, 5000, 50, 10000 } +//#define DEFAULT_MAX_ACCELERATION { 10000, 10000, 200, 10000 } //#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 #if ENABLED(LIMITED_MAX_ACCEL_EDITING) @@ -841,9 +855,12 @@ * M204 R Retract Acceleration * M204 T Travel Acceleration */ -#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves + +// ANET A6 Firmware V2.0 defaults: +// Accel: 1000 A-retract: 1000 +#define DEFAULT_ACCELERATION 1000 // X, Y, Z and E acceleration for printing moves +#define DEFAULT_RETRACT_ACCELERATION 1000 // E acceleration for retracts +#define DEFAULT_TRAVEL_ACCELERATION 1000 // X, Y, Z acceleration for travel (non printing) moves /** * Default Jerk limits (mm/s) @@ -855,6 +872,8 @@ */ //#define CLASSIC_JERK #if ENABLED(CLASSIC_JERK) + // ANET A6 Firmware V2.0 defaults: + // XY: 10, Z: +000.30, E: 5 #define DEFAULT_XJERK 10.0 #define DEFAULT_YJERK 10.0 #define DEFAULT_ZJERK 0.3 @@ -877,7 +896,7 @@ * https://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html */ #if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.013 // (mm) Distance from real junction edge + #define JUNCTION_DEVIATION_MM 0.04 // (mm) Distance from real junction edge #define JD_HANDLE_SMALL_SEGMENTS // Use curvature estimation instead of just the junction angle // for small segments (< 1mm) with large junction angles (> 135°). #endif @@ -1055,7 +1074,20 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +//#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } + +// ANET A8: FRONT-MOUNTED SENSOR WITH 3D PRINTED MOUNT +//#define NOZZLE_TO_PROBE_OFFSET { -28, -45, 0 } + +// THESE ARE FOR THE OFFICIAL ANET REAR-MOUNTED SENSOR +//#define NOZZLE_TO_PROBE_OFFSET { -1, 3, 0 } + +// ANET A6 with BLTouch/3D-Touch mounted right to the nozzle +#define NOZZLE_TO_PROBE_OFFSET { 39, 0, 0 } + +// ANET A6 with BLTouch/3D-Touch betwen Fan and Belt +// (mount: https://github.com/ralf-e/ANET_A6_modifications/tree/master/A6_X-Axis) +//#define NOZZLE_TO_PROBE_OFFSET { -30, 15, 0.75 } // Most probes should stay away from the edges of the bed, but // with NOZZLE_AS_PROBE this can be negative for a wider probing area. @@ -1063,12 +1095,13 @@ // X and Y axis travel speed (mm/min) between probes #define XY_PROBE_FEEDRATE (133*60) +//#define XY_PROBE_FEEDRATE (100*60) // Feedrate (mm/min) for the first approach when double-probing (MULTIPLE_PROBING == 2) #define Z_PROBE_FEEDRATE_FAST (4*60) // Feedrate (mm/min) for the "accurate" probe of each point -#define Z_PROBE_FEEDRATE_SLOW (Z_PROBE_FEEDRATE_FAST / 2) +#define Z_PROBE_FEEDRATE_SLOW (Z_PROBE_FEEDRATE_FAST / 3) /** * Probe Activation Switch @@ -1106,7 +1139,7 @@ * A total of 2 does fast/slow probes with a weighted average. * A total of 3 or more adds more slow probes, taking the average. */ -//#define MULTIPLE_PROBING 2 +#define MULTIPLE_PROBING 2 //#define EXTRA_PROBING 1 /** @@ -1123,11 +1156,16 @@ * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. */ -#define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow -#define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points -#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes -//#define Z_AFTER_PROBING 5 // Z position after probing is done +#if 1 // 0 for less clearance + #define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow + #define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points +#else + #define Z_CLEARANCE_DEPLOY_PROBE 5 // Z Clearance for Deploy/Stow + #define Z_CLEARANCE_BETWEEN_PROBES 3 // Z Clearance between probe points +#endif +#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes +//#define Z_AFTER_PROBING 5 // Z position after probing is done #define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping // For M851 give a range for adjusting the Z probe offset @@ -1150,12 +1188,12 @@ * These options are most useful for the BLTouch probe, but may also improve * readings with inductive probes and piezo sensors. */ -//#define PROBING_HEATERS_OFF // Turn heaters off when probing +#define PROBING_HEATERS_OFF // Turn heaters off when probing #if ENABLED(PROBING_HEATERS_OFF) //#define WAIT_FOR_BED_HEATER // Wait for bed to heat back up between probes (to improve accuracy) //#define WAIT_FOR_HOTEND // Wait for hotend to heat back up between probes (to improve accuracy & prevent cold extrude) #endif -//#define PROBING_FANS_OFF // Turn fans off when probing +#define PROBING_FANS_OFF // Turn fans off when probing //#define PROBING_STEPPERS_OFF // Turn steppers off (unless needed to hold position) when probing //#define DELAY_BEFORE_PROBING 200 // (ms) To prevent vibrations from triggering piezo sensors @@ -1191,8 +1229,11 @@ // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR false -#define INVERT_Y_DIR true -#define INVERT_Z_DIR false +//#define INVERT_Y_DIR true +//#define INVERT_Z_DIR false +// ANET A6: +#define INVERT_Y_DIR false +#define INVERT_Z_DIR true // @section extruder @@ -1232,16 +1273,51 @@ // @section machine // The size of the printable area -#define X_BED_SIZE 200 -#define Y_BED_SIZE 200 +//#define X_BED_SIZE 200 +//#define Y_BED_SIZE 200 // Travel limits (mm) after homing, corresponding to endstop positions. -#define X_MIN_POS 0 -#define Y_MIN_POS 0 +//#define X_MIN_POS 0 +//#define Y_MIN_POS 0 +//#define X_MAX_POS X_BED_SIZE +//#define Y_MAX_POS Y_BED_SIZE +//#define Z_MIN_POS 0 +//#define Z_MAX_POS 200 + +// ANET A6 Firmware V2.0 defaults: +//#define X_BED_SIZE 220 +//#define Y_BED_SIZE 220 +//#define X_MIN_POS 0 +//#define Y_MIN_POS 0 +//#define Z_MIN_POS 0 +//#define Z_MAX_POS 250 + +// ANET A6, X0/Y0 0 front left bed edge : +#define X_BED_SIZE 222 +#define Y_BED_SIZE 222 +#define X_MIN_POS -3 +#define Y_MIN_POS -5 #define Z_MIN_POS 0 +#define Z_MAX_POS 230 + +// ANET A6 with new X-Axis / modded Y-Axis: +//#define X_BED_SIZE 235 +//#define Y_BED_SIZE 230 +//#define X_MIN_POS 0 +//#define Y_MIN_POS 0 +//#define Z_MIN_POS 0 +//#define Z_MAX_POS 230 + +// ANET A6 with new X-Axis / modded Y-Axis, X0/Y0 0 front left bed edge : +//#define X_BED_SIZE 227 +//#define Y_BED_SIZE 224 +//#define X_MIN_POS -8 +//#define Y_MIN_POS -6 +//#define Z_MIN_POS 0 +//#define Z_MAX_POS 230 + #define X_MAX_POS X_BED_SIZE #define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 200 /** * Software Endstops @@ -1454,7 +1530,7 @@ #if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR) // Set the number of grid points per dimension. - #define GRID_MAX_POINTS_X 3 + #define GRID_MAX_POINTS_X 4 #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X // Probe along the Y axis, advancing X after each column @@ -1507,7 +1583,7 @@ //=========================================================================== #define MESH_INSET 10 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 3 // Don't use more than 7 points per axis, implementation limited. + #define GRID_MAX_POINTS_X 5 // Don't use more than 7 points per axis, implementation limited. #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS @@ -1578,6 +1654,11 @@ //#define MANUAL_Y_HOME_POS 0 //#define MANUAL_Z_HOME_POS 0 +// ANET A6 with new X-Axis / modded Y-Axis: +//#define MANUAL_X_HOME_POS X_MIN_POS - 8 +//#define MANUAL_Y_HOME_POS Y_MIN_POS - 6 +//#define MANUAL_Z_HOME_POS Z_MIN_POS + // Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area. // // With this feature enabled: @@ -1592,6 +1673,15 @@ #if ENABLED(Z_SAFE_HOMING) #define Z_SAFE_HOMING_X_POINT X_CENTER // X point for Z homing #define Z_SAFE_HOMING_Y_POINT Y_CENTER // Y point for Z homing + + // Anet A6 with new X-Axis + //#define Z_SAFE_HOMING_X_POINT 113 // X point for Z homing + //#define Z_SAFE_HOMING_Y_POINT 112 // Y point for Z homing + + // Anet A6 with new X-Axis and defined X_HOME_POS -7, Y_HOME_POS -6 + //#define Z_SAFE_HOMING_X_POINT 107 // X point for Z homing + //#define Z_SAFE_HOMING_Y_POINT 107 // Y point for Z homing + #endif // Homing speeds (mm/min) @@ -1672,7 +1762,7 @@ * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) */ -//#define EEPROM_SETTINGS // Persistent storage with M500 and M501 +#define EEPROM_SETTINGS // Persistent storage with M500 and M501 //#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. #define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load @@ -1706,16 +1796,16 @@ // Preheat Constants - Up to 5 are supported without changes // #define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 180 -#define PREHEAT_1_TEMP_BED 70 +#define PREHEAT_1_TEMP_HOTEND 200 +#define PREHEAT_1_TEMP_BED 50 #define PREHEAT_1_TEMP_CHAMBER 35 -#define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 +#define PREHEAT_1_FAN_SPEED 0 // ANET A6 Default is 255 #define PREHEAT_2_LABEL "ABS" -#define PREHEAT_2_TEMP_HOTEND 240 -#define PREHEAT_2_TEMP_BED 110 +#define PREHEAT_2_TEMP_HOTEND 230 +#define PREHEAT_2_TEMP_BED 70 #define PREHEAT_2_TEMP_CHAMBER 35 -#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 +#define PREHEAT_2_FAN_SPEED 0 // ANET A6 Default is 255 /** * Nozzle Park @@ -1936,7 +2026,7 @@ * SD Card support is disabled by default. If your controller has an SD slot, * you must uncomment the following option or it won't work. */ -//#define SDSUPPORT +#define SDSUPPORT /** * SD CARD: ENABLE CRC @@ -2014,7 +2104,7 @@ // If you have a speaker that can produce tones, enable it here. // By default Marlin assumes you have a buzzer with a fixed frequency. // -//#define SPEAKER +#define SPEAKER // // The duration and frequency for the UI feedback sound. @@ -2023,8 +2113,8 @@ // Note: Test audio output with the G-Code: // M300 S P // -//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 -//#define LCD_FEEDBACK_FREQUENCY_HZ 5000 +#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 40 +#define LCD_FEEDBACK_FREQUENCY_HZ 200 //============================================================================= //======================== LCD / Controller Selection ========================= @@ -2195,7 +2285,12 @@ // RepRapDiscount FULL GRAPHIC Smart Controller // https://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller // -//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER +// Note: Details on connecting to the Anet V1.0 controller are in the file pins_ANET_10.h +// +#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER +#define ST7920_DELAY_1 DELAY_NS(150) +#define ST7920_DELAY_2 DELAY_NS(150) +#define ST7920_DELAY_3 DELAY_NS(150) // // K.3D Full Graphic Smart Controller diff --git a/config/examples/Anet/A6/Configuration_adv.h b/config/examples/Anet/A6/Configuration_adv.h index 5335fa012a..0ded357ed3 100644 --- a/config/examples/Anet/A6/Configuration_adv.h +++ b/config/examples/Anet/A6/Configuration_adv.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Anet/A6" + /** * Configuration_adv.h * @@ -238,8 +240,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 60 // Seconds + #define THERMAL_PROTECTION_HYSTERESIS 10 // Degrees Celsius //#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops #if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP) @@ -258,21 +260,21 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 20 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 60 // Seconds + #define WATCH_TEMP_INCREASE 5 // Degrees Celsius #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 60 // Seconds + #define THERMAL_PROTECTION_BED_HYSTERESIS 5 // Degrees Celsius /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds + #define WATCH_BED_TEMP_PERIOD 180 // Seconds #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius #endif @@ -377,7 +379,7 @@ * Enable Autotemp Mode with M104/M109 F S B. * Disable by sending M104/M109 with no F parameter (or F0 with AUTOTEMP_PROPORTIONAL). */ -#define AUTOTEMP +//#define AUTOTEMP #if ENABLED(AUTOTEMP) #define AUTOTEMP_OLDWEIGHT 0.98 // Turn on AUTOTEMP on M104/M109 by default using proportions set here @@ -867,7 +869,7 @@ // On a 300mm bed a 5% grade would give a misalignment of ~1.5cm #define G34_MAX_GRADE 5 // (%) Maximum incline that G34 will handle - #define Z_STEPPER_ALIGN_ITERATIONS 5 // Number of iterations to apply during alignment + #define Z_STEPPER_ALIGN_ITERATIONS 3 // Number of iterations to apply during alignment #define Z_STEPPER_ALIGN_ACC 0.02 // Stop iterating early if the accuracy is better than this #define RESTORE_LEVELING_AFTER_G34 // Restore leveling after G34 is done? // After G34, re-home Z (G28 Z) or just calculate it from the last probe heights? @@ -1278,7 +1280,7 @@ // The standard SD detect circuit reads LOW when media is inserted and HIGH when empty. // Enable this option and set to HIGH if your SD cards are incorrectly detected. - //#define SD_DETECT_STATE HIGH + #define SD_DETECT_STATE LOW //#define SD_IGNORE_AT_STARTUP // Don't mount the SD card when starting up //#define SDCARD_READONLY // Read-only SD card (to save over 2K of flash) @@ -1790,7 +1792,7 @@ * * Warning: Does not respect endstops! */ -//#define BABYSTEPPING +#define BABYSTEPPING #if ENABLED(BABYSTEPPING) //#define INTEGRATED_BABYSTEPPING // EXPERIMENTAL integration of babystepping into the Stepper ISR //#define BABYSTEP_WITHOUT_HOMING @@ -1982,7 +1984,7 @@ // // G2/G3 Arc Support // -#define ARC_SUPPORT // Disable this feature to save ~3226 bytes +//#define ARC_SUPPORT // Disable this feature to save ~3226 bytes #if ENABLED(ARC_SUPPORT) #define MM_PER_ARC_SEGMENT 1 // (mm) Length (or minimum length) of each arc segment //#define ARC_SEGMENTS_PER_R 1 // Max segment length, MM_PER = Min diff --git a/config/examples/Anet/A8/Configuration.h b/config/examples/Anet/A8/Configuration.h index 78c2dc9160..2132b305a4 100644 --- a/config/examples/Anet/A8/Configuration.h +++ b/config/examples/Anet/A8/Configuration.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Anet/A8" + /** * Configuration.h * @@ -69,7 +71,7 @@ // @section info // Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes. +#define STRING_CONFIG_H_AUTHOR "(Bob Kuhn, Anet config)" // Who made the changes. //#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) /** @@ -127,18 +129,18 @@ * * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ -#define BAUDRATE 250000 +#define BAUDRATE 115200 // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH // Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_RAMPS_14_EFB + #define MOTHERBOARD BOARD_ANET_10 #endif // Name displayed in the LCD "Ready" message and Info menu -//#define CUSTOM_MACHINE_NAME "3D Printer" +#define CUSTOM_MACHINE_NAME "Anet A8" // Printer's unique ID, used by some programs to differentiate between machines. // Choose your own or use a service like https://www.uuidgenerator.net/version4 @@ -151,6 +153,7 @@ #define EXTRUDERS 1 // Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc. +// The Anet A8 original extruder is designed for 1.75mm #define DEFAULT_NOMINAL_FILAMENT_DIA 1.75 // For Cyclops or any "multi-extruder" that shares a single nozzle. @@ -416,7 +419,7 @@ * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. */ -#define TEMP_SENSOR_0 1 +#define TEMP_SENSOR_0 5 #define TEMP_SENSOR_1 0 #define TEMP_SENSOR_2 0 #define TEMP_SENSOR_3 0 @@ -424,7 +427,7 @@ #define TEMP_SENSOR_5 0 #define TEMP_SENSOR_6 0 #define TEMP_SENSOR_7 0 -#define TEMP_SENSOR_BED 0 +#define TEMP_SENSOR_BED 5 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 #define TEMP_SENSOR_COOLER 0 @@ -444,11 +447,11 @@ //#define TEMP_SENSOR_1_AS_REDUNDANT #define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10 -#define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 +#define TEMP_RESIDENCY_TIME 6 // (seconds) Time to wait for hotend to "settle" in M109 #define TEMP_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer #define TEMP_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target -#define TEMP_BED_RESIDENCY_TIME 10 // (seconds) Time to wait for bed to "settle" in M190 +#define TEMP_BED_RESIDENCY_TIME 6 // (seconds) Time to wait for bed to "settle" in M190 #define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer #define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target @@ -480,7 +483,7 @@ #define HEATER_5_MAXTEMP 275 #define HEATER_6_MAXTEMP 275 #define HEATER_7_MAXTEMP 275 -#define BED_MAXTEMP 150 +#define BED_MAXTEMP 130 #define CHAMBER_MAXTEMP 60 /** @@ -510,16 +513,18 @@ //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) // Set/get with gcode: M301 E[extruder number, 0-2] + // ANET A8 Standard Extruder at 210 Degree Celsius and 100% Fan + // (measured after M106 S255 with M303 E0 S210 C8) #if ENABLED(PID_PARAMS_PER_HOTEND) // Specify between 1 and HOTENDS values per array. // If fewer than EXTRUDER values are provided, the last element will be repeated. - #define DEFAULT_Kp_LIST { 22.20, 22.20 } - #define DEFAULT_Ki_LIST { 1.08, 1.08 } - #define DEFAULT_Kd_LIST { 114.00, 114.00 } + #define DEFAULT_Kp_LIST { 21.00, 20.00 } + #define DEFAULT_Ki_LIST { 1.25, 1.25 } + #define DEFAULT_Kd_LIST { 86.00, 86.00 } #else - #define DEFAULT_Kp 22.20 - #define DEFAULT_Ki 1.08 - #define DEFAULT_Kd 114.00 + #define DEFAULT_Kp 21.00 + #define DEFAULT_Ki 1.25 + #define DEFAULT_Kd 86.00 #endif #endif // PIDTEMP @@ -540,7 +545,7 @@ * heater. If your configuration is significantly different than this and you don't understand * the issues involved, don't use bed PID until someone else verifies that your hardware works. */ -//#define PIDTEMPBED +#define PIDTEMPBED //#define BED_LIMIT_SWITCHING @@ -556,11 +561,11 @@ //#define MIN_BED_POWER 0 //#define PID_BED_DEBUG // Sends debug data to the serial port. - // 120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - // from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) - #define DEFAULT_bedKp 10.00 - #define DEFAULT_bedKi .023 - #define DEFAULT_bedKd 305.4 + // ANET A8 + // original Bed + 0.3mm Heat conducting into 4mm borosilicate (PID-Autotune: M303 E-1 S60 C5): + #define DEFAULT_bedKp 295.00 + #define DEFAULT_bedKi 35.65 + #define DEFAULT_bedKd 610.21 // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. #endif // PIDTEMPBED @@ -613,7 +618,7 @@ //#define PID_DEBUG // Sends debug data to the serial port. Use 'M303 D' to toggle activation. //#define PID_OPENLOOP // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX //#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay - #define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature + #define PID_FUNCTIONAL_RANGE 15 // If the temperature difference between the target temperature and the actual temperature // is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max. #endif @@ -627,7 +632,7 @@ * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** */ #define PREVENT_COLD_EXTRUSION -#define EXTRUDE_MINTEMP 170 +#define EXTRUDE_MINTEMP 160 // 160 guards against false tripping when the extruder fan kicks on. /** * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. @@ -717,13 +722,13 @@ #endif // Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. +#define X_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Y_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Z_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. #define X_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. #define Y_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. #define Z_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_PROBE_ENDSTOP_INVERTING false // Set to true to invert the logic of the probe. +#define Z_MIN_PROBE_ENDSTOP_INVERTING true // Set to true to invert the logic of the probe. /** * Stepper Drivers @@ -762,7 +767,7 @@ // Enable this feature if all enabled endstop pins are interrupt-capable. // This will remove the need to poll the interrupt pins, saving many CPU cycles. -//#define ENDSTOP_INTERRUPTS_FEATURE +#define ENDSTOP_INTERRUPTS_FEATURE /** * Endstop Noise Threshold @@ -806,14 +811,14 @@ * Override with M92 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 500 } +#define DEFAULT_AXIS_STEPS_PER_UNIT { 100, 100, 400, 100 } /** * Default Max Feed Rate (mm/s) * Override with M203 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 } +#define DEFAULT_MAX_FEEDRATE { 400, 400, 8, 50 } //#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 #if ENABLED(LIMITED_MAX_FR_EDITING) @@ -826,7 +831,7 @@ * Override with M201 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 } +#define DEFAULT_MAX_ACCELERATION { 2000, 2000, 100, 10000 } //#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 #if ENABLED(LIMITED_MAX_ACCEL_EDITING) @@ -841,9 +846,9 @@ * M204 R Retract Acceleration * M204 T Travel Acceleration */ -#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves +#define DEFAULT_ACCELERATION 400 // X, Y, Z and E acceleration for printing moves +#define DEFAULT_RETRACT_ACCELERATION 1000 // E acceleration for retracts +#define DEFAULT_TRAVEL_ACCELERATION 1000 // X, Y, Z acceleration for travel (non printing) moves /** * Default Jerk limits (mm/s) @@ -877,7 +882,7 @@ * https://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html */ #if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.013 // (mm) Distance from real junction edge + #define JUNCTION_DEVIATION_MM 0.10 // (mm) Distance from real junction edge #define JD_HANDLE_SMALL_SEGMENTS // Use curvature estimation instead of just the junction angle // for small segments (< 1mm) with large junction angles (> 135°). #endif @@ -1055,14 +1060,14 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +#define NOZZLE_TO_PROBE_OFFSET { 0, 0, 0 } // Most probes should stay away from the edges of the bed, but // with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed (mm/min) between probes -#define XY_PROBE_FEEDRATE (133*60) +#define XY_PROBE_FEEDRATE (100*60) // Feedrate (mm/min) for the first approach when double-probing (MULTIPLE_PROBING == 2) #define Z_PROBE_FEEDRATE_FAST (4*60) @@ -1191,8 +1196,8 @@ // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR false -#define INVERT_Y_DIR true -#define INVERT_Z_DIR false +#define INVERT_Y_DIR false +#define INVERT_Z_DIR true // @section extruder @@ -1232,16 +1237,16 @@ // @section machine // The size of the printable area -#define X_BED_SIZE 200 -#define Y_BED_SIZE 200 +#define X_BED_SIZE 220 +#define Y_BED_SIZE 220 // Travel limits (mm) after homing, corresponding to endstop positions. -#define X_MIN_POS 0 -#define Y_MIN_POS 0 +#define X_MIN_POS -33 +#define Y_MIN_POS -10 #define Z_MIN_POS 0 #define X_MAX_POS X_BED_SIZE #define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 200 +#define Z_MAX_POS 240 /** * Software Endstops @@ -1595,7 +1600,7 @@ #endif // Homing speeds (mm/min) -#define HOMING_FEEDRATE_MM_M { (50*60), (50*60), (4*60) } +#define HOMING_FEEDRATE_MM_M { (100*60), (100*60), (4*60) } // Validate that endstops are triggered on homing moves #define VALIDATE_HOMING_ENDSTOPS @@ -1672,7 +1677,7 @@ * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) */ -//#define EEPROM_SETTINGS // Persistent storage with M500 and M501 +#define EEPROM_SETTINGS // Persistent storage with M500 and M501 //#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. #define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load @@ -1686,8 +1691,8 @@ // When enabled Marlin will send a busy status message to the host // every couple of seconds when it can't accept commands. // -#define HOST_KEEPALIVE_FEATURE // Disable this if your host doesn't like keepalive messages -#define DEFAULT_KEEPALIVE_INTERVAL 2 // Number of seconds between "busy" messages. Set with M113. +//#define HOST_KEEPALIVE_FEATURE // Disable this if your host doesn't like keepalive messages +//#define DEFAULT_KEEPALIVE_INTERVAL 2 // Number of seconds between "busy" messages. Set with M113. #define BUSY_WHILE_HEATING // Some hosts require "busy" messages even during heating // @@ -1706,14 +1711,14 @@ // Preheat Constants - Up to 5 are supported without changes // #define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 180 -#define PREHEAT_1_TEMP_BED 70 +#define PREHEAT_1_TEMP_HOTEND 190 +#define PREHEAT_1_TEMP_BED 60 #define PREHEAT_1_TEMP_CHAMBER 35 #define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 #define PREHEAT_2_LABEL "ABS" #define PREHEAT_2_TEMP_HOTEND 240 -#define PREHEAT_2_TEMP_BED 110 +#define PREHEAT_2_TEMP_BED 90 #define PREHEAT_2_TEMP_CHAMBER 35 #define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 @@ -1936,7 +1941,7 @@ * SD Card support is disabled by default. If your controller has an SD slot, * you must uncomment the following option or it won't work. */ -//#define SDSUPPORT +#define SDSUPPORT /** * SD CARD: ENABLE CRC @@ -2092,7 +2097,7 @@ // // ANET and Tronxy 20x4 Controller // -//#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin. +#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin. // This LCD is known to be susceptible to electrical interference // which scrambles the display. Pressing any button clears it up. // This is a LCD2004 display with 5 analog buttons. @@ -2195,6 +2200,8 @@ // RepRapDiscount FULL GRAPHIC Smart Controller // https://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller // +// Note: Details on connecting to the Anet V1.0 controller are in the file pins_ANET_10.h +// //#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER // diff --git a/config/examples/Anet/A8/Configuration_adv.h b/config/examples/Anet/A8/Configuration_adv.h index 5335fa012a..c7ed2073af 100644 --- a/config/examples/Anet/A8/Configuration_adv.h +++ b/config/examples/Anet/A8/Configuration_adv.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Anet/A8" + /** * Configuration_adv.h * @@ -238,8 +240,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 60 // Seconds + #define THERMAL_PROTECTION_HYSTERESIS 10 // Degrees Celsius //#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops #if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP) @@ -266,13 +268,13 @@ * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 60 // Seconds + #define THERMAL_PROTECTION_BED_HYSTERESIS 5 // Degrees Celsius /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds + #define WATCH_BED_TEMP_PERIOD 180 // Seconds #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius #endif @@ -377,7 +379,7 @@ * Enable Autotemp Mode with M104/M109 F S B. * Disable by sending M104/M109 with no F parameter (or F0 with AUTOTEMP_PROPORTIONAL). */ -#define AUTOTEMP +//#define AUTOTEMP #if ENABLED(AUTOTEMP) #define AUTOTEMP_OLDWEIGHT 0.98 // Turn on AUTOTEMP on M104/M109 by default using proportions set here @@ -867,7 +869,7 @@ // On a 300mm bed a 5% grade would give a misalignment of ~1.5cm #define G34_MAX_GRADE 5 // (%) Maximum incline that G34 will handle - #define Z_STEPPER_ALIGN_ITERATIONS 5 // Number of iterations to apply during alignment + #define Z_STEPPER_ALIGN_ITERATIONS 3 // Number of iterations to apply during alignment #define Z_STEPPER_ALIGN_ACC 0.02 // Stop iterating early if the accuracy is better than this #define RESTORE_LEVELING_AFTER_G34 // Restore leveling after G34 is done? // After G34, re-home Z (G28 Z) or just calculate it from the last probe heights? @@ -1278,7 +1280,7 @@ // The standard SD detect circuit reads LOW when media is inserted and HIGH when empty. // Enable this option and set to HIGH if your SD cards are incorrectly detected. - //#define SD_DETECT_STATE HIGH + #define SD_DETECT_STATE LOW //#define SD_IGNORE_AT_STARTUP // Don't mount the SD card when starting up //#define SDCARD_READONLY // Read-only SD card (to save over 2K of flash) @@ -1790,7 +1792,7 @@ * * Warning: Does not respect endstops! */ -//#define BABYSTEPPING +#define BABYSTEPPING #if ENABLED(BABYSTEPPING) //#define INTEGRATED_BABYSTEPPING // EXPERIMENTAL integration of babystepping into the Stepper ISR //#define BABYSTEP_WITHOUT_HOMING @@ -1852,12 +1854,12 @@ * Override if the automatically selected points are inadequate. */ #if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL) - //#define PROBE_PT_1_X 15 - //#define PROBE_PT_1_Y 180 - //#define PROBE_PT_2_X 15 - //#define PROBE_PT_2_Y 20 - //#define PROBE_PT_3_X 170 - //#define PROBE_PT_3_Y 20 + #define PROBE_PT_1_X 20 + #define PROBE_PT_1_Y 160 + #define PROBE_PT_2_X 20 + #define PROBE_PT_2_Y 10 + #define PROBE_PT_3_X 180 + #define PROBE_PT_3_Y 10 #endif /** @@ -1982,7 +1984,7 @@ // // G2/G3 Arc Support // -#define ARC_SUPPORT // Disable this feature to save ~3226 bytes +//#define ARC_SUPPORT // Disable this feature to save ~3226 bytes #if ENABLED(ARC_SUPPORT) #define MM_PER_ARC_SEGMENT 1 // (mm) Length (or minimum length) of each arc segment //#define ARC_SEGMENTS_PER_R 1 // Max segment length, MM_PER = Min diff --git a/config/examples/Anet/A8plus/Configuration.h b/config/examples/Anet/A8plus/Configuration.h index 78c2dc9160..af18009163 100644 --- a/config/examples/Anet/A8plus/Configuration.h +++ b/config/examples/Anet/A8plus/Configuration.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Anet/A8plus" + /** * Configuration.h * @@ -69,7 +71,7 @@ // @section info // Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes. +#define STRING_CONFIG_H_AUTHOR "(Martin Zeman - Zemistr, Anet A8 Plus)" // Who made the changes. //#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) /** @@ -127,18 +129,18 @@ * * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ -#define BAUDRATE 250000 +#define BAUDRATE 115200 // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH // Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_RAMPS_14_EFB + #define MOTHERBOARD BOARD_ANET_10 #endif // Name displayed in the LCD "Ready" message and Info menu -//#define CUSTOM_MACHINE_NAME "3D Printer" +#define CUSTOM_MACHINE_NAME "Anet A8 plus" // Printer's unique ID, used by some programs to differentiate between machines. // Choose your own or use a service like https://www.uuidgenerator.net/version4 @@ -151,6 +153,7 @@ #define EXTRUDERS 1 // Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc. +// The Anet A8 original extruder is designed for 1.75mm #define DEFAULT_NOMINAL_FILAMENT_DIA 1.75 // For Cyclops or any "multi-extruder" that shares a single nozzle. @@ -416,7 +419,7 @@ * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. */ -#define TEMP_SENSOR_0 1 +#define TEMP_SENSOR_0 5 #define TEMP_SENSOR_1 0 #define TEMP_SENSOR_2 0 #define TEMP_SENSOR_3 0 @@ -424,7 +427,7 @@ #define TEMP_SENSOR_5 0 #define TEMP_SENSOR_6 0 #define TEMP_SENSOR_7 0 -#define TEMP_SENSOR_BED 0 +#define TEMP_SENSOR_BED 5 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 #define TEMP_SENSOR_COOLER 0 @@ -444,11 +447,11 @@ //#define TEMP_SENSOR_1_AS_REDUNDANT #define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10 -#define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 +#define TEMP_RESIDENCY_TIME 6 // (seconds) Time to wait for hotend to "settle" in M109 #define TEMP_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer #define TEMP_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target -#define TEMP_BED_RESIDENCY_TIME 10 // (seconds) Time to wait for bed to "settle" in M190 +#define TEMP_BED_RESIDENCY_TIME 6 // (seconds) Time to wait for bed to "settle" in M190 #define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer #define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target @@ -480,7 +483,7 @@ #define HEATER_5_MAXTEMP 275 #define HEATER_6_MAXTEMP 275 #define HEATER_7_MAXTEMP 275 -#define BED_MAXTEMP 150 +#define BED_MAXTEMP 130 #define CHAMBER_MAXTEMP 60 /** @@ -510,16 +513,18 @@ //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) // Set/get with gcode: M301 E[extruder number, 0-2] + // ANET A8 Standard Extruder at 210 Degree Celsius and 100% Fan + // (measured after M106 S255 with M303 E0 S210 C8) #if ENABLED(PID_PARAMS_PER_HOTEND) // Specify between 1 and HOTENDS values per array. // If fewer than EXTRUDER values are provided, the last element will be repeated. - #define DEFAULT_Kp_LIST { 22.20, 22.20 } - #define DEFAULT_Ki_LIST { 1.08, 1.08 } - #define DEFAULT_Kd_LIST { 114.00, 114.00 } + #define DEFAULT_Kp_LIST { 49.19, 49.19 } + #define DEFAULT_Ki_LIST { 6.33, 6.33 } + #define DEFAULT_Kd_LIST { 95.60, 95.60 } #else - #define DEFAULT_Kp 22.20 - #define DEFAULT_Ki 1.08 - #define DEFAULT_Kd 114.00 + #define DEFAULT_Kp 49.19 + #define DEFAULT_Ki 6.33 + #define DEFAULT_Kd 95.60 #endif #endif // PIDTEMP @@ -540,7 +545,7 @@ * heater. If your configuration is significantly different than this and you don't understand * the issues involved, don't use bed PID until someone else verifies that your hardware works. */ -//#define PIDTEMPBED +#define PIDTEMPBED //#define BED_LIMIT_SWITCHING @@ -556,12 +561,11 @@ //#define MIN_BED_POWER 0 //#define PID_BED_DEBUG // Sends debug data to the serial port. - // 120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - // from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) - #define DEFAULT_bedKp 10.00 - #define DEFAULT_bedKi .023 - #define DEFAULT_bedKd 305.4 - + // ANET A8 + // original Bed + 0.3mm Heat conducting into 4mm borosilicate (PID-Autotune: M303 E-1 S60 C5): + #define DEFAULT_bedKp 22.20 + #define DEFAULT_bedKi 1.08 + #define DEFAULT_bedKd 114.00 // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. #endif // PIDTEMPBED @@ -613,7 +617,7 @@ //#define PID_DEBUG // Sends debug data to the serial port. Use 'M303 D' to toggle activation. //#define PID_OPENLOOP // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX //#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay - #define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature + #define PID_FUNCTIONAL_RANGE 15 // If the temperature difference between the target temperature and the actual temperature // is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max. #endif @@ -627,7 +631,7 @@ * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** */ #define PREVENT_COLD_EXTRUSION -#define EXTRUDE_MINTEMP 170 +#define EXTRUDE_MINTEMP 160 // 160 guards against false tripping when the extruder fan kicks on. /** * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. @@ -717,13 +721,13 @@ #endif // Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. +#define X_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Y_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Z_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. #define X_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. #define Y_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. #define Z_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_PROBE_ENDSTOP_INVERTING false // Set to true to invert the logic of the probe. +#define Z_MIN_PROBE_ENDSTOP_INVERTING true // Set to true to invert the logic of the probe. /** * Stepper Drivers @@ -762,7 +766,7 @@ // Enable this feature if all enabled endstop pins are interrupt-capable. // This will remove the need to poll the interrupt pins, saving many CPU cycles. -//#define ENDSTOP_INTERRUPTS_FEATURE +#define ENDSTOP_INTERRUPTS_FEATURE /** * Endstop Noise Threshold @@ -806,14 +810,14 @@ * Override with M92 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 500 } +#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 95 } /** * Default Max Feed Rate (mm/s) * Override with M203 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 } +#define DEFAULT_MAX_FEEDRATE { 400, 400, 50, 25 } //#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 #if ENABLED(LIMITED_MAX_FR_EDITING) @@ -826,7 +830,7 @@ * Override with M201 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 } +#define DEFAULT_MAX_ACCELERATION { 2000, 2000, 100, 10000 } //#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 #if ENABLED(LIMITED_MAX_ACCEL_EDITING) @@ -841,9 +845,9 @@ * M204 R Retract Acceleration * M204 T Travel Acceleration */ -#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves +#define DEFAULT_ACCELERATION 400 // X, Y, Z and E acceleration for printing moves +#define DEFAULT_RETRACT_ACCELERATION 1000 // E acceleration for retracts +#define DEFAULT_TRAVEL_ACCELERATION 1000 // X, Y, Z acceleration for travel (non printing) moves /** * Default Jerk limits (mm/s) @@ -877,7 +881,7 @@ * https://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html */ #if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.013 // (mm) Distance from real junction edge + #define JUNCTION_DEVIATION_MM 0.10 // (mm) Distance from real junction edge #define JD_HANDLE_SMALL_SEGMENTS // Use curvature estimation instead of just the junction angle // for small segments (< 1mm) with large junction angles (> 135°). #endif @@ -1065,7 +1069,7 @@ #define XY_PROBE_FEEDRATE (133*60) // Feedrate (mm/min) for the first approach when double-probing (MULTIPLE_PROBING == 2) -#define Z_PROBE_FEEDRATE_FAST (4*60) +#define Z_PROBE_FEEDRATE_FAST (6*60) // Feedrate (mm/min) for the "accurate" probe of each point #define Z_PROBE_FEEDRATE_SLOW (Z_PROBE_FEEDRATE_FAST / 2) @@ -1190,9 +1194,9 @@ // @section machine // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR false +#define INVERT_X_DIR true #define INVERT_Y_DIR true -#define INVERT_Z_DIR false +#define INVERT_Z_DIR true // @section extruder @@ -1232,16 +1236,16 @@ // @section machine // The size of the printable area -#define X_BED_SIZE 200 -#define Y_BED_SIZE 200 +#define X_BED_SIZE 300 +#define Y_BED_SIZE 300 // Travel limits (mm) after homing, corresponding to endstop positions. -#define X_MIN_POS 0 -#define Y_MIN_POS 0 +#define X_MIN_POS -26 +#define Y_MIN_POS -6 #define Z_MIN_POS 0 -#define X_MAX_POS X_BED_SIZE -#define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 200 +#define X_MAX_POS 300 +#define Y_MAX_POS 297 +#define Z_MAX_POS 370 /** * Software Endstops @@ -1595,7 +1599,7 @@ #endif // Homing speeds (mm/min) -#define HOMING_FEEDRATE_MM_M { (50*60), (50*60), (4*60) } +#define HOMING_FEEDRATE_MM_M { (100*60), (100*60), (6*60) } // Validate that endstops are triggered on homing moves #define VALIDATE_HOMING_ENDSTOPS @@ -1672,7 +1676,7 @@ * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) */ -//#define EEPROM_SETTINGS // Persistent storage with M500 and M501 +#define EEPROM_SETTINGS // Persistent storage with M500 and M501 //#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. #define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load @@ -1706,14 +1710,14 @@ // Preheat Constants - Up to 5 are supported without changes // #define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 180 +#define PREHEAT_1_TEMP_HOTEND 205 #define PREHEAT_1_TEMP_BED 70 #define PREHEAT_1_TEMP_CHAMBER 35 #define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 -#define PREHEAT_2_LABEL "ABS" +#define PREHEAT_2_LABEL "PET-G" #define PREHEAT_2_TEMP_HOTEND 240 -#define PREHEAT_2_TEMP_BED 110 +#define PREHEAT_2_TEMP_BED 90 #define PREHEAT_2_TEMP_CHAMBER 35 #define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 @@ -1728,7 +1732,7 @@ * P1 Raise the nozzle always to Z-park height. * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. */ -//#define NOZZLE_PARK_FEATURE +#define NOZZLE_PARK_FEATURE #if ENABLED(NOZZLE_PARK_FEATURE) // Specify a park position as { X, Y, Z_raise } @@ -1936,7 +1940,7 @@ * SD Card support is disabled by default. If your controller has an SD slot, * you must uncomment the following option or it won't work. */ -//#define SDSUPPORT +#define SDSUPPORT /** * SD CARD: ENABLE CRC @@ -1983,7 +1987,7 @@ // // Set this option if CLOCKWISE causes values to DECREASE // -//#define REVERSE_ENCODER_DIRECTION +#define REVERSE_ENCODER_DIRECTION // // This option reverses the encoder direction for navigating LCD menus. @@ -2301,8 +2305,11 @@ // A clone of the RepRapDiscount full graphics display but with // different pins/wiring (see pins_ANET_10.h). Enable one of these. // -//#define ANET_FULL_GRAPHICS_LCD +#define ANET_FULL_GRAPHICS_LCD //#define ANET_FULL_GRAPHICS_LCD_ALT_WIRING +#define ST7920_DELAY_1 DELAY_NS(150) +#define ST7920_DELAY_2 DELAY_NS(150) +#define ST7920_DELAY_3 DELAY_NS(150) // // AZSMZ 12864 LCD with SD diff --git a/config/examples/Anet/A8plus/Configuration_adv.h b/config/examples/Anet/A8plus/Configuration_adv.h index 5335fa012a..f163417736 100644 --- a/config/examples/Anet/A8plus/Configuration_adv.h +++ b/config/examples/Anet/A8plus/Configuration_adv.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Anet/A8plus" + /** * Configuration_adv.h * @@ -377,7 +379,7 @@ * Enable Autotemp Mode with M104/M109 F S B. * Disable by sending M104/M109 with no F parameter (or F0 with AUTOTEMP_PROPORTIONAL). */ -#define AUTOTEMP +//#define AUTOTEMP #if ENABLED(AUTOTEMP) #define AUTOTEMP_OLDWEIGHT 0.98 // Turn on AUTOTEMP on M104/M109 by default using proportions set here @@ -867,7 +869,7 @@ // On a 300mm bed a 5% grade would give a misalignment of ~1.5cm #define G34_MAX_GRADE 5 // (%) Maximum incline that G34 will handle - #define Z_STEPPER_ALIGN_ITERATIONS 5 // Number of iterations to apply during alignment + #define Z_STEPPER_ALIGN_ITERATIONS 3 // Number of iterations to apply during alignment #define Z_STEPPER_ALIGN_ACC 0.02 // Stop iterating early if the accuracy is better than this #define RESTORE_LEVELING_AFTER_G34 // Restore leveling after G34 is done? // After G34, re-home Z (G28 Z) or just calculate it from the last probe heights? @@ -1278,7 +1280,7 @@ // The standard SD detect circuit reads LOW when media is inserted and HIGH when empty. // Enable this option and set to HIGH if your SD cards are incorrectly detected. - //#define SD_DETECT_STATE HIGH + #define SD_DETECT_STATE LOW //#define SD_IGNORE_AT_STARTUP // Don't mount the SD card when starting up //#define SDCARD_READONLY // Read-only SD card (to save over 2K of flash) @@ -1301,7 +1303,7 @@ //#define BROWSE_MEDIA_ON_INSERT // Open the file browser when media is inserted - #define EVENT_GCODE_SD_ABORT "G28XY" // G-code to run on SD Abort Print (e.g., "G28XY" or "G27") + #define EVENT_GCODE_SD_ABORT "G28XY\nG91\nG1 F1000 Z+20\nG1 F5000 Y" STRINGIFY(Y_MAX_POS) "\nG90\nM84 X Y E" // G-code to run on SD Abort Print (e.g., "G28XY" or "G27") #if ENABLED(PRINTER_EVENT_LEDS) #define PE_LEDS_COMPLETED_TIME (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination @@ -1315,7 +1317,7 @@ * an option on the LCD screen to continue the print from the last-known * point in the file. */ - //#define POWER_LOSS_RECOVERY + #define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) //#define BACKUP_POWER_SUPPLY // Backup power / UPS to move the steppers on power loss @@ -1794,7 +1796,7 @@ #if ENABLED(BABYSTEPPING) //#define INTEGRATED_BABYSTEPPING // EXPERIMENTAL integration of babystepping into the Stepper ISR //#define BABYSTEP_WITHOUT_HOMING - //#define BABYSTEP_ALWAYS_AVAILABLE // Allow babystepping at all times (not just during movement). + #define BABYSTEP_ALWAYS_AVAILABLE // Allow babystepping at all times (not just during movement). //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way //#define BABYSTEP_MILLIMETER_UNITS // Specify BABYSTEP_MULTIPLICATOR_(XY|Z) in mm instead of micro-steps @@ -1982,7 +1984,7 @@ // // G2/G3 Arc Support // -#define ARC_SUPPORT // Disable this feature to save ~3226 bytes +//#define ARC_SUPPORT // Disable this feature to save ~3226 bytes #if ENABLED(ARC_SUPPORT) #define MM_PER_ARC_SEGMENT 1 // (mm) Length (or minimum length) of each arc segment //#define ARC_SEGMENTS_PER_R 1 // Max segment length, MM_PER = Min diff --git a/config/examples/Anet/A9/Configuration.h b/config/examples/Anet/A9/Configuration.h index 78c2dc9160..74443f166d 100644 --- a/config/examples/Anet/A9/Configuration.h +++ b/config/examples/Anet/A9/Configuration.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Anet/A9" + /** * Configuration.h * @@ -69,7 +71,7 @@ // @section info // Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes. +#define STRING_CONFIG_H_AUTHOR "(Technoo)" // Who made the changes. //#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) /** @@ -134,11 +136,11 @@ // Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_RAMPS_14_EFB + #define MOTHERBOARD BOARD_ANET_10 #endif // Name displayed in the LCD "Ready" message and Info menu -//#define CUSTOM_MACHINE_NAME "3D Printer" +#define CUSTOM_MACHINE_NAME "Anet A9" // Printer's unique ID, used by some programs to differentiate between machines. // Choose your own or use a service like https://www.uuidgenerator.net/version4 @@ -416,7 +418,7 @@ * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. */ -#define TEMP_SENSOR_0 1 +#define TEMP_SENSOR_0 5 #define TEMP_SENSOR_1 0 #define TEMP_SENSOR_2 0 #define TEMP_SENSOR_3 0 @@ -424,7 +426,7 @@ #define TEMP_SENSOR_5 0 #define TEMP_SENSOR_6 0 #define TEMP_SENSOR_7 0 -#define TEMP_SENSOR_BED 0 +#define TEMP_SENSOR_BED 5 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 #define TEMP_SENSOR_COOLER 0 @@ -472,7 +474,7 @@ // Above this temperature the heater will be switched off. // This can protect components from overheating, but NOT from shorts and failures. // (Use MINTEMP for thermistor short/failure protection.) -#define HEATER_0_MAXTEMP 275 +#define HEATER_0_MAXTEMP 240 #define HEATER_1_MAXTEMP 275 #define HEATER_2_MAXTEMP 275 #define HEATER_3_MAXTEMP 275 @@ -480,7 +482,7 @@ #define HEATER_5_MAXTEMP 275 #define HEATER_6_MAXTEMP 275 #define HEATER_7_MAXTEMP 275 -#define BED_MAXTEMP 150 +#define BED_MAXTEMP 80 #define CHAMBER_MAXTEMP 60 /** @@ -513,13 +515,13 @@ #if ENABLED(PID_PARAMS_PER_HOTEND) // Specify between 1 and HOTENDS values per array. // If fewer than EXTRUDER values are provided, the last element will be repeated. - #define DEFAULT_Kp_LIST { 22.20, 22.20 } - #define DEFAULT_Ki_LIST { 1.08, 1.08 } - #define DEFAULT_Kd_LIST { 114.00, 114.00 } + #define DEFAULT_Kp_LIST { 30.36, 30.36 } + #define DEFAULT_Ki_LIST { 2.47, 2.47 } + #define DEFAULT_Kd_LIST { 93.27, 93.27 } #else - #define DEFAULT_Kp 22.20 - #define DEFAULT_Ki 1.08 - #define DEFAULT_Kd 114.00 + #define DEFAULT_Kp 30.36 + #define DEFAULT_Ki 2.47 + #define DEFAULT_Kd 93.27 #endif #endif // PIDTEMP @@ -540,7 +542,7 @@ * heater. If your configuration is significantly different than this and you don't understand * the issues involved, don't use bed PID until someone else verifies that your hardware works. */ -//#define PIDTEMPBED +#define PIDTEMPBED //#define BED_LIMIT_SWITCHING @@ -558,9 +560,9 @@ // 120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) // from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) - #define DEFAULT_bedKp 10.00 - #define DEFAULT_bedKi .023 - #define DEFAULT_bedKd 305.4 + #define DEFAULT_bedKp 81.03 + #define DEFAULT_bedKi 15.22 + #define DEFAULT_bedKd 287.61 // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. #endif // PIDTEMPBED @@ -627,7 +629,7 @@ * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** */ #define PREVENT_COLD_EXTRUSION -#define EXTRUDE_MINTEMP 170 +#define EXTRUDE_MINTEMP 180 /** * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. @@ -717,9 +719,9 @@ #endif // Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. +#define X_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Y_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Z_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. #define X_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. #define Y_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. #define Z_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. @@ -806,14 +808,14 @@ * Override with M92 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 500 } +#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 95.5 } /** * Default Max Feed Rate (mm/s) * Override with M203 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 } +#define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 10 } //#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 #if ENABLED(LIMITED_MAX_FR_EDITING) @@ -1192,12 +1194,12 @@ // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR false #define INVERT_Y_DIR true -#define INVERT_Z_DIR false +#define INVERT_Z_DIR true // @section extruder // For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR false +#define INVERT_E0_DIR true #define INVERT_E1_DIR false #define INVERT_E2_DIR false #define INVERT_E3_DIR false @@ -1232,13 +1234,13 @@ // @section machine // The size of the printable area -#define X_BED_SIZE 200 -#define Y_BED_SIZE 200 +#define X_BED_SIZE 159 +#define Y_BED_SIZE 159 // Travel limits (mm) after homing, corresponding to endstop positions. -#define X_MIN_POS 0 -#define Y_MIN_POS 0 -#define Z_MIN_POS 0 +#define X_MIN_POS -9 +#define Y_MIN_POS -5 +#define Z_MIN_POS -5.9 #define X_MAX_POS X_BED_SIZE #define Y_MAX_POS Y_BED_SIZE #define Z_MAX_POS 200 @@ -1389,7 +1391,7 @@ //#define AUTO_BED_LEVELING_LINEAR //#define AUTO_BED_LEVELING_BILINEAR //#define AUTO_BED_LEVELING_UBL -//#define MESH_BED_LEVELING +#define MESH_BED_LEVELING /** * Normally G28 leaves leveling disabled on completion. Enable one of @@ -1518,7 +1520,7 @@ * Add a bed leveling sub-menu for ABL or MBL. * Include a guided procedure if manual probing is enabled. */ -//#define LCD_BED_LEVELING +#define LCD_BED_LEVELING #if ENABLED(LCD_BED_LEVELING) #define MESH_EDIT_Z_STEP 0.025 // (mm) Step size while manually probing Z axis. @@ -1672,7 +1674,7 @@ * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) */ -//#define EEPROM_SETTINGS // Persistent storage with M500 and M501 +#define EEPROM_SETTINGS // Persistent storage with M500 and M501 //#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. #define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load @@ -1706,14 +1708,14 @@ // Preheat Constants - Up to 5 are supported without changes // #define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 180 -#define PREHEAT_1_TEMP_BED 70 +#define PREHEAT_1_TEMP_HOTEND 205 +#define PREHEAT_1_TEMP_BED 60 #define PREHEAT_1_TEMP_CHAMBER 35 #define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 -#define PREHEAT_2_LABEL "ABS" -#define PREHEAT_2_TEMP_HOTEND 240 -#define PREHEAT_2_TEMP_BED 110 +#define PREHEAT_2_LABEL "PETG" +#define PREHEAT_2_TEMP_HOTEND 220 +#define PREHEAT_2_TEMP_BED 60 #define PREHEAT_2_TEMP_CHAMBER 35 #define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 @@ -1936,7 +1938,7 @@ * SD Card support is disabled by default. If your controller has an SD slot, * you must uncomment the following option or it won't work. */ -//#define SDSUPPORT +#define SDSUPPORT /** * SD CARD: ENABLE CRC @@ -1952,7 +1954,7 @@ * just remove some extraneous menu items to recover space. */ //#define NO_LCD_MENUS -//#define SLIM_LCD_MENUS +#define SLIM_LCD_MENUS // // ENCODER SETTINGS @@ -2195,7 +2197,7 @@ // RepRapDiscount FULL GRAPHIC Smart Controller // https://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller // -//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER +#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER // // K.3D Full Graphic Smart Controller diff --git a/config/examples/Anet/A9/Configuration_adv.h b/config/examples/Anet/A9/Configuration_adv.h index 5335fa012a..5235a29704 100644 --- a/config/examples/Anet/A9/Configuration_adv.h +++ b/config/examples/Anet/A9/Configuration_adv.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Anet/A9" + /** * Configuration_adv.h * @@ -1222,7 +1224,7 @@ //#define LCD_TIMEOUT_TO_STATUS 15000 #if ENABLED(SHOW_BOOTSCREEN) - #define BOOTSCREEN_TIMEOUT 4000 // (ms) Total Duration to display the boot screen(s) + #define BOOTSCREEN_TIMEOUT 1000 // (ms) Total Duration to display the boot screen(s) #if EITHER(HAS_MARLINUI_U8GLIB, TFT_COLOR_UI) #define BOOT_MARLIN_LOGO_SMALL // Show a smaller Marlin logo on the Boot Screen (saving lots of flash) #endif @@ -1982,7 +1984,7 @@ // // G2/G3 Arc Support // -#define ARC_SUPPORT // Disable this feature to save ~3226 bytes +//#define ARC_SUPPORT // Disable this feature to save ~3226 bytes #if ENABLED(ARC_SUPPORT) #define MM_PER_ARC_SEGMENT 1 // (mm) Length (or minimum length) of each arc segment //#define ARC_SEGMENTS_PER_R 1 // Max segment length, MM_PER = Min diff --git a/config/examples/Anet/E10/Configuration.h b/config/examples/Anet/E10/Configuration.h index 78c2dc9160..7edf576aaf 100644 --- a/config/examples/Anet/E10/Configuration.h +++ b/config/examples/Anet/E10/Configuration.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Anet/E10" + /** * Configuration.h * @@ -69,7 +71,7 @@ // @section info // Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes. +#define STRING_CONFIG_H_AUTHOR "default" // Who made the changes. //#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) /** @@ -134,7 +136,7 @@ // Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_RAMPS_14_EFB + #define MOTHERBOARD BOARD_ANET_10 #endif // Name displayed in the LCD "Ready" message and Info menu @@ -416,7 +418,7 @@ * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. */ -#define TEMP_SENSOR_0 1 +#define TEMP_SENSOR_0 5 #define TEMP_SENSOR_1 0 #define TEMP_SENSOR_2 0 #define TEMP_SENSOR_3 0 @@ -424,7 +426,7 @@ #define TEMP_SENSOR_5 0 #define TEMP_SENSOR_6 0 #define TEMP_SENSOR_7 0 -#define TEMP_SENSOR_BED 0 +#define TEMP_SENSOR_BED 5 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 #define TEMP_SENSOR_COOLER 0 @@ -472,7 +474,7 @@ // Above this temperature the heater will be switched off. // This can protect components from overheating, but NOT from shorts and failures. // (Use MINTEMP for thermistor short/failure protection.) -#define HEATER_0_MAXTEMP 275 +#define HEATER_0_MAXTEMP 305 #define HEATER_1_MAXTEMP 275 #define HEATER_2_MAXTEMP 275 #define HEATER_3_MAXTEMP 275 @@ -480,7 +482,7 @@ #define HEATER_5_MAXTEMP 275 #define HEATER_6_MAXTEMP 275 #define HEATER_7_MAXTEMP 275 -#define BED_MAXTEMP 150 +#define BED_MAXTEMP 120 #define CHAMBER_MAXTEMP 60 /** @@ -558,9 +560,9 @@ // 120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) // from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) - #define DEFAULT_bedKp 10.00 - #define DEFAULT_bedKi .023 - #define DEFAULT_bedKd 305.4 + #define DEFAULT_bedKp 24.14 + #define DEFAULT_bedKi 1.49 + #define DEFAULT_bedKd 97.91 // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. #endif // PIDTEMPBED @@ -634,7 +636,7 @@ * Note: For Bowden Extruders make this large enough to allow load/unload. */ #define PREVENT_LENGTHY_EXTRUDE -#define EXTRUDE_MAXLENGTH 200 +#define EXTRUDE_MAXLENGTH 400 //=========================================================================== //======================== Thermal Runaway Protection ======================= @@ -717,9 +719,9 @@ #endif // Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. +#define X_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Y_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Z_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. #define X_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. #define Y_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. #define Z_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. @@ -806,7 +808,7 @@ * Override with M92 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 500 } +#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 95 } /** * Default Max Feed Rate (mm/s) @@ -841,9 +843,9 @@ * M204 R Retract Acceleration * M204 T Travel Acceleration */ -#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves +#define DEFAULT_ACCELERATION 1000 // X, Y, Z and E acceleration for printing moves +#define DEFAULT_RETRACT_ACCELERATION 1000 // E acceleration for retracts +#define DEFAULT_TRAVEL_ACCELERATION 1000 // X, Y, Z acceleration for travel (non printing) moves /** * Default Jerk limits (mm/s) @@ -877,7 +879,7 @@ * https://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html */ #if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.013 // (mm) Distance from real junction edge + #define JUNCTION_DEVIATION_MM 0.04 // (mm) Distance from real junction edge #define JD_HANDLE_SMALL_SEGMENTS // Use curvature estimation instead of just the junction angle // for small segments (< 1mm) with large junction angles (> 135°). #endif @@ -890,7 +892,7 @@ * * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained */ -//#define S_CURVE_ACCELERATION +#define S_CURVE_ACCELERATION //=========================================================================== //============================= Z Probe Options ============================= @@ -906,7 +908,7 @@ * The probe replaces the Z-MIN endstop and is used for Z homing. * (Automatically enables USE_PROBE_FOR_Z_HOMING.) */ -#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN +//#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN // Force the use of the probe for Z-axis homing //#define USE_PROBE_FOR_Z_HOMING @@ -940,7 +942,7 @@ * Use G29 repeatedly, adjusting the Z height at each point with movement commands * or (with LCD_BED_LEVELING) the LCD controller. */ -//#define PROBE_MANUALLY +#define PROBE_MANUALLY /** * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. @@ -1062,7 +1064,7 @@ #define PROBING_MARGIN 10 // X and Y axis travel speed (mm/min) between probes -#define XY_PROBE_FEEDRATE (133*60) +#define XY_PROBE_FEEDRATE (40*60) // Feedrate (mm/min) for the first approach when double-probing (MULTIPLE_PROBING == 2) #define Z_PROBE_FEEDRATE_FAST (4*60) @@ -1192,19 +1194,19 @@ // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR false #define INVERT_Y_DIR true -#define INVERT_Z_DIR false +#define INVERT_Z_DIR true // @section extruder // For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR false -#define INVERT_E1_DIR false -#define INVERT_E2_DIR false -#define INVERT_E3_DIR false -#define INVERT_E4_DIR false -#define INVERT_E5_DIR false -#define INVERT_E6_DIR false -#define INVERT_E7_DIR false +#define INVERT_E0_DIR true +#define INVERT_E1_DIR true +#define INVERT_E2_DIR true +#define INVERT_E3_DIR true +#define INVERT_E4_DIR true +#define INVERT_E5_DIR true +#define INVERT_E6_DIR true +#define INVERT_E7_DIR true // @section homing @@ -1218,7 +1220,7 @@ */ //#define Z_IDLE_HEIGHT Z_HOME_POS -//#define Z_HOMING_HEIGHT 4 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ... +#define Z_HOMING_HEIGHT 10 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ... // Be sure to have this much clearance over your Z_MAX_POS to prevent grinding. //#define Z_AFTER_HOMING 10 // (mm) Height to move to after homing Z @@ -1232,16 +1234,16 @@ // @section machine // The size of the printable area -#define X_BED_SIZE 200 -#define Y_BED_SIZE 200 +#define X_BED_SIZE 220 +#define Y_BED_SIZE 270 // Travel limits (mm) after homing, corresponding to endstop positions. #define X_MIN_POS 0 -#define Y_MIN_POS 0 +#define Y_MIN_POS -5 #define Z_MIN_POS 0 #define X_MAX_POS X_BED_SIZE #define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 200 +#define Z_MAX_POS 290 /** * Software Endstops @@ -1389,14 +1391,14 @@ //#define AUTO_BED_LEVELING_LINEAR //#define AUTO_BED_LEVELING_BILINEAR //#define AUTO_BED_LEVELING_UBL -//#define MESH_BED_LEVELING +#define MESH_BED_LEVELING /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable * leveling immediately after G28. */ -//#define RESTORE_LEVELING_AFTER_G28 +#define RESTORE_LEVELING_AFTER_G28 //#define ENABLE_LEVELING_AFTER_G28 /** @@ -1424,7 +1426,7 @@ // Gradually reduce leveling correction until a set height is reached, // at which point movement will be level to the machine's XY plane. // The height can be set with M420 Z - #define ENABLE_LEVELING_FADE_HEIGHT + //#define ENABLE_LEVELING_FADE_HEIGHT #if ENABLED(ENABLE_LEVELING_FADE_HEIGHT) #define DEFAULT_LEVELING_FADE_HEIGHT 10.0 // (mm) Default fade height. #endif @@ -1518,22 +1520,22 @@ * Add a bed leveling sub-menu for ABL or MBL. * Include a guided procedure if manual probing is enabled. */ -//#define LCD_BED_LEVELING +#define LCD_BED_LEVELING #if ENABLED(LCD_BED_LEVELING) #define MESH_EDIT_Z_STEP 0.025 // (mm) Step size while manually probing Z axis. - #define LCD_PROBE_Z_RANGE 4 // (mm) Z Range centered on Z_MIN_POS for LCD Z adjustment - //#define MESH_EDIT_MENU // Add a menu to edit mesh points + #define LCD_PROBE_Z_RANGE 5 // (mm) Z Range centered on Z_MIN_POS for LCD Z adjustment + #define MESH_EDIT_MENU // Add a menu to edit mesh points #endif // Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS +#define LEVEL_BED_CORNERS #if ENABLED(LEVEL_BED_CORNERS) #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner + #define LEVEL_CORNERS_Z_HOP 5.0 // (mm) Z height of nozzle between leveling points + #define LEVEL_CENTER_TOO // Move to the center after the last corner //#define LEVEL_CORNERS_USE_PROBE #if ENABLED(LEVEL_CORNERS_USE_PROBE) #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 @@ -1595,7 +1597,7 @@ #endif // Homing speeds (mm/min) -#define HOMING_FEEDRATE_MM_M { (50*60), (50*60), (4*60) } +#define HOMING_FEEDRATE_MM_M { (40*60), (40*60), (4*60) } // Validate that endstops are triggered on homing moves #define VALIDATE_HOMING_ENDSTOPS @@ -1672,12 +1674,12 @@ * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) */ -//#define EEPROM_SETTINGS // Persistent storage with M500 and M501 +#define EEPROM_SETTINGS // Persistent storage with M500 and M501 //#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. #define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load #if ENABLED(EEPROM_SETTINGS) - //#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. + #define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. #endif // @@ -1706,14 +1708,14 @@ // Preheat Constants - Up to 5 are supported without changes // #define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 180 -#define PREHEAT_1_TEMP_BED 70 +#define PREHEAT_1_TEMP_HOTEND 200 +#define PREHEAT_1_TEMP_BED 60 #define PREHEAT_1_TEMP_CHAMBER 35 #define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 #define PREHEAT_2_LABEL "ABS" -#define PREHEAT_2_TEMP_HOTEND 240 -#define PREHEAT_2_TEMP_BED 110 +#define PREHEAT_2_TEMP_HOTEND 250 +#define PREHEAT_2_TEMP_BED 100 #define PREHEAT_2_TEMP_CHAMBER 35 #define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 @@ -1728,11 +1730,11 @@ * P1 Raise the nozzle always to Z-park height. * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. */ -//#define NOZZLE_PARK_FEATURE +#define NOZZLE_PARK_FEATURE #if ENABLED(NOZZLE_PARK_FEATURE) // Specify a park position as { X, Y, Z_raise } - #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 } + #define NOZZLE_PARK_POINT { (X_MIN_POS), (Y_MAX_POS), 10 } //#define NOZZLE_PARK_X_ONLY // X move only is required to park //#define NOZZLE_PARK_Y_ONLY // Y move only is required to park #define NOZZLE_PARK_Z_RAISE_MIN 2 // (mm) Always raise Z by at least this distance @@ -1936,7 +1938,7 @@ * SD Card support is disabled by default. If your controller has an SD slot, * you must uncomment the following option or it won't work. */ -//#define SDSUPPORT +#define SDSUPPORT /** * SD CARD: ENABLE CRC @@ -2301,8 +2303,11 @@ // A clone of the RepRapDiscount full graphics display but with // different pins/wiring (see pins_ANET_10.h). Enable one of these. // -//#define ANET_FULL_GRAPHICS_LCD +#define ANET_FULL_GRAPHICS_LCD //#define ANET_FULL_GRAPHICS_LCD_ALT_WIRING +#define ST7920_DELAY_1 DELAY_NS(250) +#define ST7920_DELAY_2 DELAY_NS(250) +#define ST7920_DELAY_3 DELAY_NS(250) // // AZSMZ 12864 LCD with SD diff --git a/config/examples/Anet/E10/Configuration_adv.h b/config/examples/Anet/E10/Configuration_adv.h index 5335fa012a..808c01de45 100644 --- a/config/examples/Anet/E10/Configuration_adv.h +++ b/config/examples/Anet/E10/Configuration_adv.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Anet/E10" + /** * Configuration_adv.h * @@ -238,12 +240,12 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_HYSTERESIS 12 // Degrees Celsius - //#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops + #define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops #if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP) - //#define NO_FAN_SLOWING_IN_PID_TUNING // Don't slow fan speed during M303 + #define NO_FAN_SLOWING_IN_PID_TUNING // Don't slow fan speed during M303 #endif /** @@ -258,7 +260,7 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 20 // Seconds + #define WATCH_TEMP_PERIOD 30 // Seconds #define WATCH_TEMP_INCREASE 2 // Degrees Celsius #endif @@ -266,13 +268,13 @@ * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 40 // Seconds + #define THERMAL_PROTECTION_BED_HYSTERESIS 5 // Degrees Celsius /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds + #define WATCH_BED_TEMP_PERIOD 80 // Seconds #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius #endif @@ -377,7 +379,7 @@ * Enable Autotemp Mode with M104/M109 F S B. * Disable by sending M104/M109 with no F parameter (or F0 with AUTOTEMP_PROPORTIONAL). */ -#define AUTOTEMP +//#define AUTOTEMP #if ENABLED(AUTOTEMP) #define AUTOTEMP_OLDWEIGHT 0.98 // Turn on AUTOTEMP on M104/M109 by default using proportions set here @@ -741,8 +743,8 @@ //#define HOMING_BACKOFF_POST_MM { 2, 2, 2 } // (mm) Backoff from endstops after homing -//#define QUICK_HOME // If G28 contains XY do a diagonal move first -//#define HOME_Y_BEFORE_X // If G28 contains XY home Y before X +#define QUICK_HOME // If G28 contains XY do a diagonal move first +#define HOME_Y_BEFORE_X // If G28 contains XY home Y before X //#define HOME_Z_FIRST // Home Z first. Requires a Z-MIN endstop (not a probe). //#define CODEPENDENT_XY_HOMING // If X/Y can't home without homing Y/X first @@ -867,7 +869,7 @@ // On a 300mm bed a 5% grade would give a misalignment of ~1.5cm #define G34_MAX_GRADE 5 // (%) Maximum incline that G34 will handle - #define Z_STEPPER_ALIGN_ITERATIONS 5 // Number of iterations to apply during alignment + #define Z_STEPPER_ALIGN_ITERATIONS 3 // Number of iterations to apply during alignment #define Z_STEPPER_ALIGN_ACC 0.02 // Stop iterating early if the accuracy is better than this #define RESTORE_LEVELING_AFTER_G34 // Restore leveling after G34 is done? // After G34, re-home Z (G28 Z) or just calculate it from the last probe heights? @@ -1059,7 +1061,7 @@ * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the * lowest stepping frequencies. */ -//#define ADAPTIVE_STEP_SMOOTHING +#define ADAPTIVE_STEP_SMOOTHING /** * Custom Microstepping @@ -1145,7 +1147,7 @@ // Change values more rapidly when the encoder is rotated faster #define ENCODER_RATE_MULTIPLIER #if ENABLED(ENCODER_RATE_MULTIPLIER) - #define ENCODER_10X_STEPS_PER_SEC 30 // (steps/s) Encoder rate for 10x speed + #define ENCODER_10X_STEPS_PER_SEC 40 // (steps/s) Encoder rate for 10x speed #define ENCODER_100X_STEPS_PER_SEC 80 // (steps/s) Encoder rate for 100x speed #endif @@ -1181,7 +1183,7 @@ #endif // BACK menu items keep the highlight at the top - //#define TURBO_BACK_MENU_ITEM + #define TURBO_BACK_MENU_ITEM // Add a mute option to the LCD menu //#define SOUND_MENU_ITEM @@ -1219,7 +1221,7 @@ #if HAS_DISPLAY // The timeout (in ms) to return to the status screen from sub-menus - //#define LCD_TIMEOUT_TO_STATUS 15000 + #define LCD_TIMEOUT_TO_STATUS 60000 #if ENABLED(SHOW_BOOTSCREEN) #define BOOTSCREEN_TIMEOUT 4000 // (ms) Total Duration to display the boot screen(s) @@ -1301,7 +1303,7 @@ //#define BROWSE_MEDIA_ON_INSERT // Open the file browser when media is inserted - #define EVENT_GCODE_SD_ABORT "G28XY" // G-code to run on SD Abort Print (e.g., "G28XY" or "G27") + #define EVENT_GCODE_SD_ABORT "G27" // G-code to run on SD Abort Print (e.g., "G28XY" or "G27") #if ENABLED(PRINTER_EVENT_LEDS) #define PE_LEDS_COMPLETED_TIME (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination @@ -1565,7 +1567,7 @@ #define STATUS_HOTEND_INVERTED // Show solid nozzle bitmaps when heating (Requires STATUS_HOTEND_ANIM) #define STATUS_HOTEND_ANIM // Use a second bitmap to indicate hotend heating #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating - #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating + //#define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating //#define STATUS_CUTTER_ANIM // Use a second bitmap to indicate spindle / laser active //#define STATUS_COOLER_ANIM // Use a second bitmap to indicate laser cooling //#define STATUS_FLOWMETER_ANIM // Use multiple bitmaps to indicate coolant flow @@ -1790,20 +1792,20 @@ * * Warning: Does not respect endstops! */ -//#define BABYSTEPPING +#define BABYSTEPPING #if ENABLED(BABYSTEPPING) //#define INTEGRATED_BABYSTEPPING // EXPERIMENTAL integration of babystepping into the Stepper ISR //#define BABYSTEP_WITHOUT_HOMING - //#define BABYSTEP_ALWAYS_AVAILABLE // Allow babystepping at all times (not just during movement). + #define BABYSTEP_ALWAYS_AVAILABLE // Allow babystepping at all times (not just during movement). //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way //#define BABYSTEP_MILLIMETER_UNITS // Specify BABYSTEP_MULTIPLICATOR_(XY|Z) in mm instead of micro-steps #define BABYSTEP_MULTIPLICATOR_Z 1 // (steps or mm) Steps or millimeter distance for each Z babystep #define BABYSTEP_MULTIPLICATOR_XY 1 // (steps or mm) Steps or millimeter distance for each XY babystep - //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. + #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 2000 // Maximum interval between clicks, in milliseconds. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on doubleclick when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) @@ -1816,7 +1818,7 @@ //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping #if ENABLED(BABYSTEP_ZPROBE_OFFSET) //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - //#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor + #define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif @@ -1982,7 +1984,7 @@ // // G2/G3 Arc Support // -#define ARC_SUPPORT // Disable this feature to save ~3226 bytes +//#define ARC_SUPPORT // Disable this feature to save ~3226 bytes #if ENABLED(ARC_SUPPORT) #define MM_PER_ARC_SEGMENT 1 // (mm) Length (or minimum length) of each arc segment //#define ARC_SEGMENTS_PER_R 1 // Max segment length, MM_PER = Min @@ -2141,7 +2143,7 @@ * Currently handles M108, M112, M410, M876 * NOTE: Not yet implemented for all platforms. */ -//#define EMERGENCY_PARSER +#define EMERGENCY_PARSER /** * Realtime Reporting (requires EMERGENCY_PARSER) @@ -2170,7 +2172,7 @@ //#define NO_TIMEOUTS 1000 // Milliseconds // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. -//#define ADVANCED_OK +#define ADVANCED_OK // Printrun may have trouble receiving long strings all at once. // This option inserts short delays between lines of serial output. @@ -2337,7 +2339,7 @@ // Filament can be extruded repeatedly from the Filament Change menu // until extrusion is consistent, and to purge old filament. #define ADVANCED_PAUSE_RESUME_PRIME 0 // (mm) Extra distance to prime nozzle after returning from park. - //#define ADVANCED_PAUSE_FANS_PAUSE // Turn off print-cooling fans while the machine is paused. + #define ADVANCED_PAUSE_FANS_PAUSE // Turn off print-cooling fans while the machine is paused. // Filament Unload does a Retract, Delay, and Purge first: #define FILAMENT_UNLOAD_PURGE_RETRACT 13 // (mm) Unload initial retract length. @@ -2349,10 +2351,10 @@ #define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed. #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change. - //#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. - //#define HOME_BEFORE_FILAMENT_CHANGE // If needed, home before parking for filament change + #define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. + #define HOME_BEFORE_FILAMENT_CHANGE // If needed, home before parking for filament change - //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. + #define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) #endif @@ -3439,7 +3441,7 @@ /** * Disable all Volumetric extrusion options */ -//#define NO_VOLUMETRICS +#define NO_VOLUMETRICS #if DISABLED(NO_VOLUMETRICS) /** @@ -3471,7 +3473,7 @@ * - M206 and M428 are disabled. * - G92 will revert to its behavior from Marlin 1.0. */ -//#define NO_WORKSPACE_OFFSETS +#define NO_WORKSPACE_OFFSETS // Extra options for the M114 "Current Position" report //#define M114_DETAIL // Use 'M114` for details to check planner calculations @@ -3652,7 +3654,7 @@ */ //#define HOST_ACTION_COMMANDS #if ENABLED(HOST_ACTION_COMMANDS) - //#define HOST_PROMPT_SUPPORT + #define HOST_PROMPT_SUPPORT //#define HOST_START_MENU_ITEM // Add a menu item that tells the host to start #endif diff --git a/config/examples/Anet/E16/BTT SKR 1.3/Configuration.h b/config/examples/Anet/E16/BTT SKR 1.3/Configuration.h index 78c2dc9160..1c9f304a3b 100644 --- a/config/examples/Anet/E16/BTT SKR 1.3/Configuration.h +++ b/config/examples/Anet/E16/BTT SKR 1.3/Configuration.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Anet/E16/BTT SKR 1.3" + /** * Configuration.h * @@ -69,7 +71,7 @@ // @section info // Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes. +#define STRING_CONFIG_H_AUTHOR "(chepo92, E16 SKR)" // Who made the changes. //#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) /** @@ -102,14 +104,14 @@ * * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] */ -#define SERIAL_PORT 0 +#define SERIAL_PORT -1 /** * Select a secondary serial port on the board to use for communication with the host. * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] */ -//#define SERIAL_PORT_2 -1 +#define SERIAL_PORT_2 0 /** * Select a third serial port on the board to use for communication with the host. @@ -127,18 +129,18 @@ * * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ -#define BAUDRATE 250000 +#define BAUDRATE 115200 // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH // Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_RAMPS_14_EFB + #define MOTHERBOARD BOARD_BTT_SKR_V1_3 #endif // Name displayed in the LCD "Ready" message and Info menu -//#define CUSTOM_MACHINE_NAME "3D Printer" +#define CUSTOM_MACHINE_NAME "E16 SKR" // Printer's unique ID, used by some programs to differentiate between machines. // Choose your own or use a service like https://www.uuidgenerator.net/version4 @@ -424,7 +426,7 @@ #define TEMP_SENSOR_5 0 #define TEMP_SENSOR_6 0 #define TEMP_SENSOR_7 0 -#define TEMP_SENSOR_BED 0 +#define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 #define TEMP_SENSOR_COOLER 0 @@ -510,16 +512,18 @@ //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) // Set/get with gcode: M301 E[extruder number, 0-2] + // ANET E16 Standard Extruder at 210 Degree Celsius and 100% Fan + // (measured after M106 S255 with M303 E0 S210 C8) #if ENABLED(PID_PARAMS_PER_HOTEND) // Specify between 1 and HOTENDS values per array. // If fewer than EXTRUDER values are provided, the last element will be repeated. - #define DEFAULT_Kp_LIST { 22.20, 22.20 } - #define DEFAULT_Ki_LIST { 1.08, 1.08 } - #define DEFAULT_Kd_LIST { 114.00, 114.00 } + #define DEFAULT_Kp_LIST { 21.00, 21.00 } + #define DEFAULT_Ki_LIST { 1.25, 1.25 } + #define DEFAULT_Kd_LIST { 86.00, 86.00 } #else - #define DEFAULT_Kp 22.20 - #define DEFAULT_Ki 1.08 - #define DEFAULT_Kd 114.00 + #define DEFAULT_Kp 21.00 + #define DEFAULT_Ki 1.25 + #define DEFAULT_Kd 86.00 #endif #endif // PIDTEMP @@ -540,7 +544,7 @@ * heater. If your configuration is significantly different than this and you don't understand * the issues involved, don't use bed PID until someone else verifies that your hardware works. */ -//#define PIDTEMPBED +#define PIDTEMPBED //#define BED_LIMIT_SWITCHING @@ -556,11 +560,11 @@ //#define MIN_BED_POWER 0 //#define PID_BED_DEBUG // Sends debug data to the serial port. - // 120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - // from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) - #define DEFAULT_bedKp 10.00 - #define DEFAULT_bedKi .023 - #define DEFAULT_bedKd 305.4 + // ANET E16 + // original Bed 4mm glass plate (PID-Autotune: M303 E-1 S60 C5): + #define DEFAULT_bedKp 295.00 + #define DEFAULT_bedKi 35.65 + #define DEFAULT_bedKd 610.21 // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. #endif // PIDTEMPBED @@ -717,9 +721,9 @@ #endif // Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. +#define X_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Y_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Z_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. #define X_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. #define Y_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. #define Z_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. @@ -743,15 +747,15 @@ * TMC5130, TMC5130_STANDALONE, TMC5160, TMC5160_STANDALONE * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'L6474', 'POWERSTEP01', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2160', 'TMC2160_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC2209', 'TMC2209_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE', 'TMC5160', 'TMC5160_STANDALONE'] */ -#define X_DRIVER_TYPE A4988 -#define Y_DRIVER_TYPE A4988 -#define Z_DRIVER_TYPE A4988 +#define X_DRIVER_TYPE TMC2208 +#define Y_DRIVER_TYPE TMC2208 +#define Z_DRIVER_TYPE TMC2208 //#define X2_DRIVER_TYPE A4988 //#define Y2_DRIVER_TYPE A4988 //#define Z2_DRIVER_TYPE A4988 //#define Z3_DRIVER_TYPE A4988 //#define Z4_DRIVER_TYPE A4988 -#define E0_DRIVER_TYPE A4988 +#define E0_DRIVER_TYPE TMC2208 //#define E1_DRIVER_TYPE A4988 //#define E2_DRIVER_TYPE A4988 //#define E3_DRIVER_TYPE A4988 @@ -806,14 +810,14 @@ * Override with M92 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 500 } +#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 100 } /** * Default Max Feed Rate (mm/s) * Override with M203 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 } +#define DEFAULT_MAX_FEEDRATE { 200, 200, 5, 25 } //#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 #if ENABLED(LIMITED_MAX_FR_EDITING) @@ -826,7 +830,7 @@ * Override with M201 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 } +#define DEFAULT_MAX_ACCELERATION { 1000, 1000, 100, 10000 } //#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 #if ENABLED(LIMITED_MAX_ACCEL_EDITING) @@ -841,9 +845,9 @@ * M204 R Retract Acceleration * M204 T Travel Acceleration */ -#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves +#define DEFAULT_ACCELERATION 1000 // X, Y, Z and E acceleration for printing moves +#define DEFAULT_RETRACT_ACCELERATION 1000 // E acceleration for retracts +#define DEFAULT_TRAVEL_ACCELERATION 1000 // X, Y, Z acceleration for travel (non printing) moves /** * Default Jerk limits (mm/s) @@ -890,7 +894,7 @@ * * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained */ -//#define S_CURVE_ACCELERATION +#define S_CURVE_ACCELERATION //=========================================================================== //============================= Z Probe Options ============================= @@ -1232,8 +1236,8 @@ // @section machine // The size of the printable area -#define X_BED_SIZE 200 -#define Y_BED_SIZE 200 +#define X_BED_SIZE 300 +#define Y_BED_SIZE 300 // Travel limits (mm) after homing, corresponding to endstop positions. #define X_MIN_POS 0 @@ -1241,7 +1245,7 @@ #define Z_MIN_POS 0 #define X_MAX_POS X_BED_SIZE #define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 200 +#define Z_MAX_POS 300 /** * Software Endstops @@ -1389,7 +1393,7 @@ //#define AUTO_BED_LEVELING_LINEAR //#define AUTO_BED_LEVELING_BILINEAR //#define AUTO_BED_LEVELING_UBL -//#define MESH_BED_LEVELING +#define MESH_BED_LEVELING /** * Normally G28 leaves leveling disabled on completion. Enable one of @@ -1424,7 +1428,7 @@ // Gradually reduce leveling correction until a set height is reached, // at which point movement will be level to the machine's XY plane. // The height can be set with M420 Z - #define ENABLE_LEVELING_FADE_HEIGHT + //#define ENABLE_LEVELING_FADE_HEIGHT #if ENABLED(ENABLE_LEVELING_FADE_HEIGHT) #define DEFAULT_LEVELING_FADE_HEIGHT 10.0 // (mm) Default fade height. #endif @@ -1518,7 +1522,7 @@ * Add a bed leveling sub-menu for ABL or MBL. * Include a guided procedure if manual probing is enabled. */ -//#define LCD_BED_LEVELING +#define LCD_BED_LEVELING #if ENABLED(LCD_BED_LEVELING) #define MESH_EDIT_Z_STEP 0.025 // (mm) Step size while manually probing Z axis. @@ -1672,7 +1676,7 @@ * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) */ -//#define EEPROM_SETTINGS // Persistent storage with M500 and M501 +#define EEPROM_SETTINGS // Persistent storage with M500 and M501 //#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. #define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load @@ -1936,7 +1940,7 @@ * SD Card support is disabled by default. If your controller has an SD slot, * you must uncomment the following option or it won't work. */ -//#define SDSUPPORT +#define SDSUPPORT /** * SD CARD: ENABLE CRC @@ -2006,7 +2010,7 @@ // // Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. // -//#define INDIVIDUAL_AXIS_HOMING_MENU +#define INDIVIDUAL_AXIS_HOMING_MENU // // SPEAKER/BUZZER @@ -2014,7 +2018,7 @@ // If you have a speaker that can produce tones, enable it here. // By default Marlin assumes you have a buzzer with a fixed frequency. // -//#define SPEAKER +#define SPEAKER // // The duration and frequency for the UI feedback sound. @@ -2195,7 +2199,7 @@ // RepRapDiscount FULL GRAPHIC Smart Controller // https://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller // -//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER +#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER // // K.3D Full Graphic Smart Controller diff --git a/config/examples/Anet/E16/BTT SKR 1.3/Configuration_adv.h b/config/examples/Anet/E16/BTT SKR 1.3/Configuration_adv.h index 5335fa012a..f2ac2bc750 100644 --- a/config/examples/Anet/E16/BTT SKR 1.3/Configuration_adv.h +++ b/config/examples/Anet/E16/BTT SKR 1.3/Configuration_adv.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Anet/E16/BTT SKR 1.3" + /** * Configuration_adv.h * @@ -741,7 +743,7 @@ //#define HOMING_BACKOFF_POST_MM { 2, 2, 2 } // (mm) Backoff from endstops after homing -//#define QUICK_HOME // If G28 contains XY do a diagonal move first +#define QUICK_HOME // If G28 contains XY do a diagonal move first //#define HOME_Y_BEFORE_X // If G28 contains XY home Y before X //#define HOME_Z_FIRST // Home Z first. Requires a Z-MIN endstop (not a probe). //#define CODEPENDENT_XY_HOMING // If X/Y can't home without homing Y/X first @@ -2529,7 +2531,7 @@ #endif #if AXIS_IS_TMC(Z) - #define Z_CURRENT 800 + #define Z_CURRENT 1400 #define Z_CURRENT_HOME Z_CURRENT #define Z_MICROSTEPS 16 #define Z_RSENSE 0.11 diff --git a/config/examples/Anet/E16/Stock/Configuration.h b/config/examples/Anet/E16/Stock/Configuration.h index 78c2dc9160..d2606d0e03 100644 --- a/config/examples/Anet/E16/Stock/Configuration.h +++ b/config/examples/Anet/E16/Stock/Configuration.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Anet/E16/Stock" + /** * Configuration.h * @@ -69,7 +71,7 @@ // @section info // Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes. +#define STRING_CONFIG_H_AUTHOR "InsanityAutomation" // Who made the changes. //#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) /** @@ -87,10 +89,10 @@ #define SHOW_BOOTSCREEN // Show the bitmap in Marlin/_Bootscreen.h on startup. -//#define SHOW_CUSTOM_BOOTSCREEN +#define SHOW_CUSTOM_BOOTSCREEN // Show the bitmap in Marlin/_Statusscreen.h on the status screen. -//#define CUSTOM_STATUS_SCREEN_IMAGE +#define CUSTOM_STATUS_SCREEN_IMAGE // @section machine @@ -134,11 +136,11 @@ // Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_RAMPS_14_EFB + #define MOTHERBOARD BOARD_ANET_10 #endif // Name displayed in the LCD "Ready" message and Info menu -//#define CUSTOM_MACHINE_NAME "3D Printer" +#define CUSTOM_MACHINE_NAME "AnetE16V1.3" // Printer's unique ID, used by some programs to differentiate between machines. // Choose your own or use a service like https://www.uuidgenerator.net/version4 @@ -416,7 +418,7 @@ * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. */ -#define TEMP_SENSOR_0 1 +#define TEMP_SENSOR_0 5 #define TEMP_SENSOR_1 0 #define TEMP_SENSOR_2 0 #define TEMP_SENSOR_3 0 @@ -424,7 +426,7 @@ #define TEMP_SENSOR_5 0 #define TEMP_SENSOR_6 0 #define TEMP_SENSOR_7 0 -#define TEMP_SENSOR_BED 0 +#define TEMP_SENSOR_BED 5 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 #define TEMP_SENSOR_COOLER 0 @@ -472,7 +474,7 @@ // Above this temperature the heater will be switched off. // This can protect components from overheating, but NOT from shorts and failures. // (Use MINTEMP for thermistor short/failure protection.) -#define HEATER_0_MAXTEMP 275 +#define HEATER_0_MAXTEMP 305 #define HEATER_1_MAXTEMP 275 #define HEATER_2_MAXTEMP 275 #define HEATER_3_MAXTEMP 275 @@ -480,7 +482,7 @@ #define HEATER_5_MAXTEMP 275 #define HEATER_6_MAXTEMP 275 #define HEATER_7_MAXTEMP 275 -#define BED_MAXTEMP 150 +#define BED_MAXTEMP 120 #define CHAMBER_MAXTEMP 60 /** @@ -510,16 +512,18 @@ //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) // Set/get with gcode: M301 E[extruder number, 0-2] + // ANET E16 Standard Extruder at 210 Degree Celsius and 100% Fan + // (measured after M106 S255 with M303 E0 S210 C8) #if ENABLED(PID_PARAMS_PER_HOTEND) // Specify between 1 and HOTENDS values per array. // If fewer than EXTRUDER values are provided, the last element will be repeated. - #define DEFAULT_Kp_LIST { 22.20, 22.20 } - #define DEFAULT_Ki_LIST { 1.08, 1.08 } - #define DEFAULT_Kd_LIST { 114.00, 114.00 } + #define DEFAULT_Kp_LIST { 21.00, 21.00 } + #define DEFAULT_Ki_LIST { 1.25, 1.25 } + #define DEFAULT_Kd_LIST { 86.00, 86.00 } #else - #define DEFAULT_Kp 22.20 - #define DEFAULT_Ki 1.08 - #define DEFAULT_Kd 114.00 + #define DEFAULT_Kp 21.00 + #define DEFAULT_Ki 1.25 + #define DEFAULT_Kd 86.00 #endif #endif // PIDTEMP @@ -540,7 +544,7 @@ * heater. If your configuration is significantly different than this and you don't understand * the issues involved, don't use bed PID until someone else verifies that your hardware works. */ -//#define PIDTEMPBED +#define PIDTEMPBED //#define BED_LIMIT_SWITCHING @@ -556,11 +560,11 @@ //#define MIN_BED_POWER 0 //#define PID_BED_DEBUG // Sends debug data to the serial port. - // 120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - // from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) - #define DEFAULT_bedKp 10.00 - #define DEFAULT_bedKi .023 - #define DEFAULT_bedKd 305.4 + // ANET E16 + // original Bed 4mm glass plate (PID-Autotune: M303 E-1 S60 C5): + #define DEFAULT_bedKp 295.00 + #define DEFAULT_bedKi 35.65 + #define DEFAULT_bedKd 610.21 // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. #endif // PIDTEMPBED @@ -717,13 +721,13 @@ #endif // Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. +#define X_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Y_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Z_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. #define X_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. #define Y_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. #define Z_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_PROBE_ENDSTOP_INVERTING false // Set to true to invert the logic of the probe. +#define Z_MIN_PROBE_ENDSTOP_INVERTING true // Set to true to invert the logic of the probe. /** * Stepper Drivers @@ -806,14 +810,14 @@ * Override with M92 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 500 } +#define DEFAULT_AXIS_STEPS_PER_UNIT { 100, 100, 400, 100 } /** * Default Max Feed Rate (mm/s) * Override with M203 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 } +#define DEFAULT_MAX_FEEDRATE { 300, 300, 50, 25 } //#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 #if ENABLED(LIMITED_MAX_FR_EDITING) @@ -826,7 +830,7 @@ * Override with M201 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 } +#define DEFAULT_MAX_ACCELERATION { 2000, 2000, 100, 10000 } //#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 #if ENABLED(LIMITED_MAX_ACCEL_EDITING) @@ -841,9 +845,9 @@ * M204 R Retract Acceleration * M204 T Travel Acceleration */ -#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves +#define DEFAULT_ACCELERATION 1000 // X, Y, Z and E acceleration for printing moves +#define DEFAULT_RETRACT_ACCELERATION 1000 // E acceleration for retracts +#define DEFAULT_TRAVEL_ACCELERATION 1000 // X, Y, Z acceleration for travel (non printing) moves /** * Default Jerk limits (mm/s) @@ -877,7 +881,7 @@ * https://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html */ #if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.013 // (mm) Distance from real junction edge + #define JUNCTION_DEVIATION_MM 0.04 // (mm) Distance from real junction edge #define JD_HANDLE_SMALL_SEGMENTS // Use curvature estimation instead of just the junction angle // for small segments (< 1mm) with large junction angles (> 135°). #endif @@ -1192,7 +1196,7 @@ // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR false #define INVERT_Y_DIR true -#define INVERT_Z_DIR false +#define INVERT_Z_DIR true // @section extruder @@ -1232,16 +1236,16 @@ // @section machine // The size of the printable area -#define X_BED_SIZE 200 -#define Y_BED_SIZE 200 +#define X_BED_SIZE 300 +#define Y_BED_SIZE 300 // Travel limits (mm) after homing, corresponding to endstop positions. -#define X_MIN_POS 0 -#define Y_MIN_POS 0 +#define X_MIN_POS -2 +#define Y_MIN_POS -23 #define Z_MIN_POS 0 #define X_MAX_POS X_BED_SIZE #define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 200 +#define Z_MAX_POS 400 /** * Software Endstops @@ -1396,7 +1400,7 @@ * these options to restore the prior leveling state or to always enable * leveling immediately after G28. */ -//#define RESTORE_LEVELING_AFTER_G28 +#define RESTORE_LEVELING_AFTER_G28 //#define ENABLE_LEVELING_AFTER_G28 /** @@ -1424,7 +1428,7 @@ // Gradually reduce leveling correction until a set height is reached, // at which point movement will be level to the machine's XY plane. // The height can be set with M420 Z - #define ENABLE_LEVELING_FADE_HEIGHT + //#define ENABLE_LEVELING_FADE_HEIGHT #if ENABLED(ENABLE_LEVELING_FADE_HEIGHT) #define DEFAULT_LEVELING_FADE_HEIGHT 10.0 // (mm) Default fade height. #endif @@ -1672,12 +1676,12 @@ * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) */ -//#define EEPROM_SETTINGS // Persistent storage with M500 and M501 +#define EEPROM_SETTINGS // Persistent storage with M500 and M501 //#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. #define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load #if ENABLED(EEPROM_SETTINGS) - //#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. + #define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. #endif // @@ -1728,11 +1732,11 @@ * P1 Raise the nozzle always to Z-park height. * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. */ -//#define NOZZLE_PARK_FEATURE +#define NOZZLE_PARK_FEATURE #if ENABLED(NOZZLE_PARK_FEATURE) // Specify a park position as { X, Y, Z_raise } - #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 } + #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MIN_POS + 10), 10 } //#define NOZZLE_PARK_X_ONLY // X move only is required to park //#define NOZZLE_PARK_Y_ONLY // Y move only is required to park #define NOZZLE_PARK_Z_RAISE_MIN 2 // (mm) Always raise Z by at least this distance @@ -1936,7 +1940,7 @@ * SD Card support is disabled by default. If your controller has an SD slot, * you must uncomment the following option or it won't work. */ -//#define SDSUPPORT +#define SDSUPPORT /** * SD CARD: ENABLE CRC @@ -1952,7 +1956,7 @@ * just remove some extraneous menu items to recover space. */ //#define NO_LCD_MENUS -//#define SLIM_LCD_MENUS +#define SLIM_LCD_MENUS // // ENCODER SETTINGS @@ -2195,7 +2199,7 @@ // RepRapDiscount FULL GRAPHIC Smart Controller // https://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller // -//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER +#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER // // K.3D Full Graphic Smart Controller diff --git a/config/examples/Anet/E16/Stock/Configuration_adv.h b/config/examples/Anet/E16/Stock/Configuration_adv.h index 5335fa012a..89a8ea4abc 100644 --- a/config/examples/Anet/E16/Stock/Configuration_adv.h +++ b/config/examples/Anet/E16/Stock/Configuration_adv.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Anet/E16/Stock" + /** * Configuration_adv.h * @@ -238,12 +240,12 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_HYSTERESIS 12 // Degrees Celsius - //#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops + #define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops #if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP) - //#define NO_FAN_SLOWING_IN_PID_TUNING // Don't slow fan speed during M303 + #define NO_FAN_SLOWING_IN_PID_TUNING // Don't slow fan speed during M303 #endif /** @@ -258,7 +260,7 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 20 // Seconds + #define WATCH_TEMP_PERIOD 30 // Seconds #define WATCH_TEMP_INCREASE 2 // Degrees Celsius #endif @@ -266,13 +268,13 @@ * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 40 // Seconds + #define THERMAL_PROTECTION_BED_HYSTERESIS 5 // Degrees Celsius /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds + #define WATCH_BED_TEMP_PERIOD 80 // Seconds #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius #endif @@ -377,7 +379,7 @@ * Enable Autotemp Mode with M104/M109 F S B. * Disable by sending M104/M109 with no F parameter (or F0 with AUTOTEMP_PROPORTIONAL). */ -#define AUTOTEMP +//#define AUTOTEMP #if ENABLED(AUTOTEMP) #define AUTOTEMP_OLDWEIGHT 0.98 // Turn on AUTOTEMP on M104/M109 by default using proportions set here @@ -741,7 +743,7 @@ //#define HOMING_BACKOFF_POST_MM { 2, 2, 2 } // (mm) Backoff from endstops after homing -//#define QUICK_HOME // If G28 contains XY do a diagonal move first +#define QUICK_HOME // If G28 contains XY do a diagonal move first //#define HOME_Y_BEFORE_X // If G28 contains XY home Y before X //#define HOME_Z_FIRST // Home Z first. Requires a Z-MIN endstop (not a probe). //#define CODEPENDENT_XY_HOMING // If X/Y can't home without homing Y/X first @@ -867,7 +869,7 @@ // On a 300mm bed a 5% grade would give a misalignment of ~1.5cm #define G34_MAX_GRADE 5 // (%) Maximum incline that G34 will handle - #define Z_STEPPER_ALIGN_ITERATIONS 5 // Number of iterations to apply during alignment + #define Z_STEPPER_ALIGN_ITERATIONS 3 // Number of iterations to apply during alignment #define Z_STEPPER_ALIGN_ACC 0.02 // Stop iterating early if the accuracy is better than this #define RESTORE_LEVELING_AFTER_G34 // Restore leveling after G34 is done? // After G34, re-home Z (G28 Z) or just calculate it from the last probe heights? @@ -1175,7 +1177,7 @@ #endif // Include a page of printer information in the LCD Main Menu - //#define LCD_INFO_MENU + #define LCD_INFO_MENU #if ENABLED(LCD_INFO_MENU) //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages #endif @@ -1219,7 +1221,7 @@ #if HAS_DISPLAY // The timeout (in ms) to return to the status screen from sub-menus - //#define LCD_TIMEOUT_TO_STATUS 15000 + #define LCD_TIMEOUT_TO_STATUS 15000 #if ENABLED(SHOW_BOOTSCREEN) #define BOOTSCREEN_TIMEOUT 4000 // (ms) Total Duration to display the boot screen(s) @@ -1294,7 +1296,7 @@ // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended. #define SDCARD_RATHERRECENTFIRST - #define SD_MENU_CONFIRM_START // Confirm the selected SD file before printing + //#define SD_MENU_CONFIRM_START // Confirm the selected SD file before printing //#define NO_SD_AUTOSTART // Remove auto#.g file support completely to save some Flash, SRAM //#define MENU_ADDAUTOSTART // Add a menu option to run auto#.g files @@ -1381,7 +1383,7 @@ //#define UTF_FILENAME_SUPPORT // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT + #define LONG_FILENAME_HOST_SUPPORT // Enable this option to scroll long filenames in the SD card menu //#define SCROLL_LONG_FILENAMES @@ -1790,18 +1792,18 @@ * * Warning: Does not respect endstops! */ -//#define BABYSTEPPING +#define BABYSTEPPING #if ENABLED(BABYSTEPPING) //#define INTEGRATED_BABYSTEPPING // EXPERIMENTAL integration of babystepping into the Stepper ISR //#define BABYSTEP_WITHOUT_HOMING - //#define BABYSTEP_ALWAYS_AVAILABLE // Allow babystepping at all times (not just during movement). + #define BABYSTEP_ALWAYS_AVAILABLE // Allow babystepping at all times (not just during movement). //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way //#define BABYSTEP_MILLIMETER_UNITS // Specify BABYSTEP_MULTIPLICATOR_(XY|Z) in mm instead of micro-steps #define BABYSTEP_MULTIPLICATOR_Z 1 // (steps or mm) Steps or millimeter distance for each Z babystep #define BABYSTEP_MULTIPLICATOR_XY 1 // (steps or mm) Steps or millimeter distance for each XY babystep - //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. + #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. // Note: Extra time may be added to mitigate controller latency. @@ -1816,7 +1818,7 @@ //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping #if ENABLED(BABYSTEP_ZPROBE_OFFSET) //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - //#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor + #define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif @@ -1982,7 +1984,7 @@ // // G2/G3 Arc Support // -#define ARC_SUPPORT // Disable this feature to save ~3226 bytes +//#define ARC_SUPPORT // Disable this feature to save ~3226 bytes #if ENABLED(ARC_SUPPORT) #define MM_PER_ARC_SEGMENT 1 // (mm) Length (or minimum length) of each arc segment //#define ARC_SEGMENTS_PER_R 1 // Max segment length, MM_PER = Min @@ -2141,7 +2143,7 @@ * Currently handles M108, M112, M410, M876 * NOTE: Not yet implemented for all platforms. */ -//#define EMERGENCY_PARSER +#define EMERGENCY_PARSER /** * Realtime Reporting (requires EMERGENCY_PARSER) @@ -2167,10 +2169,10 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +#define NO_TIMEOUTS 1000 // Milliseconds // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. -//#define ADVANCED_OK +#define ADVANCED_OK // Printrun may have trouble receiving long strings all at once. // This option inserts short delays between lines of serial output. @@ -2311,7 +2313,7 @@ * * Enable PARK_HEAD_ON_PAUSE to add the G-code M125 Pause and Park. */ -//#define ADVANCED_PAUSE_FEATURE +#define ADVANCED_PAUSE_FEATURE #if ENABLED(ADVANCED_PAUSE_FEATURE) #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. @@ -2337,7 +2339,7 @@ // Filament can be extruded repeatedly from the Filament Change menu // until extrusion is consistent, and to purge old filament. #define ADVANCED_PAUSE_RESUME_PRIME 0 // (mm) Extra distance to prime nozzle after returning from park. - //#define ADVANCED_PAUSE_FANS_PAUSE // Turn off print-cooling fans while the machine is paused. + #define ADVANCED_PAUSE_FANS_PAUSE // Turn off print-cooling fans while the machine is paused. // Filament Unload does a Retract, Delay, and Purge first: #define FILAMENT_UNLOAD_PURGE_RETRACT 13 // (mm) Unload initial retract length. @@ -2349,8 +2351,8 @@ #define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed. #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change. - //#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. - //#define HOME_BEFORE_FILAMENT_CHANGE // If needed, home before parking for filament change + #define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. + #define HOME_BEFORE_FILAMENT_CHANGE // If needed, home before parking for filament change //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) @@ -3650,9 +3652,9 @@ * Host Prompt Support enables Marlin to use the host for user prompts so * filament runout and other processes can be managed from the host side. */ -//#define HOST_ACTION_COMMANDS +#define HOST_ACTION_COMMANDS #if ENABLED(HOST_ACTION_COMMANDS) - //#define HOST_PROMPT_SUPPORT + #define HOST_PROMPT_SUPPORT //#define HOST_START_MENU_ITEM // Add a menu item that tells the host to start #endif diff --git a/config/examples/Anet/ET4+/Configuration.h b/config/examples/Anet/ET4+/Configuration.h index 78c2dc9160..4f34a03041 100644 --- a/config/examples/Anet/ET4+/Configuration.h +++ b/config/examples/Anet/ET4+/Configuration.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Anet/ET4+" + /** * Configuration.h * @@ -102,7 +104,7 @@ * * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] */ -#define SERIAL_PORT 0 +#define SERIAL_PORT 1 /** * Select a secondary serial port on the board to use for communication with the host. @@ -127,18 +129,18 @@ * * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ -#define BAUDRATE 250000 +#define BAUDRATE 115200 // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH // Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_RAMPS_14_EFB + #define MOTHERBOARD BOARD_ANET_ET4 #endif // Name displayed in the LCD "Ready" message and Info menu -//#define CUSTOM_MACHINE_NAME "3D Printer" +#define CUSTOM_MACHINE_NAME "Anet ET4" // Printer's unique ID, used by some programs to differentiate between machines. // Choose your own or use a service like https://www.uuidgenerator.net/version4 @@ -424,7 +426,7 @@ #define TEMP_SENSOR_5 0 #define TEMP_SENSOR_6 0 #define TEMP_SENSOR_7 0 -#define TEMP_SENSOR_BED 0 +#define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 #define TEMP_SENSOR_COOLER 0 @@ -445,12 +447,12 @@ #define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10 #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 -#define TEMP_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target +#define TEMP_WINDOW 3 // (°C) Temperature proximity for the "temperature reached" timer +#define TEMP_HYSTERESIS 5 // (°C) Temperature proximity considered "close enough" to the target #define TEMP_BED_RESIDENCY_TIME 10 // (seconds) Time to wait for bed to "settle" in M190 -#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target +#define TEMP_BED_WINDOW 3 // (°C) Temperature proximity for the "temperature reached" timer +#define TEMP_BED_HYSTERESIS 5 // (°C) Temperature proximity considered "close enough" to the target #define TEMP_CHAMBER_RESIDENCY_TIME 10 // (seconds) Time to wait for chamber to "settle" in M191 #define TEMP_CHAMBER_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer @@ -472,7 +474,7 @@ // Above this temperature the heater will be switched off. // This can protect components from overheating, but NOT from shorts and failures. // (Use MINTEMP for thermistor short/failure protection.) -#define HEATER_0_MAXTEMP 275 +#define HEATER_0_MAXTEMP 260 #define HEATER_1_MAXTEMP 275 #define HEATER_2_MAXTEMP 275 #define HEATER_3_MAXTEMP 275 @@ -480,7 +482,7 @@ #define HEATER_5_MAXTEMP 275 #define HEATER_6_MAXTEMP 275 #define HEATER_7_MAXTEMP 275 -#define BED_MAXTEMP 150 +#define BED_MAXTEMP 110 #define CHAMBER_MAXTEMP 60 /** @@ -505,21 +507,27 @@ #define PID_K1 0.95 // Smoothing factor within any PID loop #if ENABLED(PIDTEMP) - //#define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) - //#define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) + #define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) + #define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) // Set/get with gcode: M301 E[extruder number, 0-2] #if ENABLED(PID_PARAMS_PER_HOTEND) // Specify between 1 and HOTENDS values per array. // If fewer than EXTRUDER values are provided, the last element will be repeated. - #define DEFAULT_Kp_LIST { 22.20, 22.20 } - #define DEFAULT_Ki_LIST { 1.08, 1.08 } - #define DEFAULT_Kd_LIST { 114.00, 114.00 } + #define DEFAULT_Kp_LIST { 18.62, 18.62 } + #define DEFAULT_Ki_LIST { 1.38, 1.38 } + #define DEFAULT_Kd_LIST { 62.92, 62.92 } #else - #define DEFAULT_Kp 22.20 - #define DEFAULT_Ki 1.08 - #define DEFAULT_Kd 114.00 + // ET4 Default settings + //#define DEFAULT_Kp 40.00 + //#define DEFAULT_Ki 0.70 + //#define DEFAULT_Kd 50.00 + + // ET4 Autotune PID results + #define DEFAULT_Kp 18.62 + #define DEFAULT_Ki 1.38 + #define DEFAULT_Kd 62.92 #endif #endif // PIDTEMP @@ -540,7 +548,7 @@ * heater. If your configuration is significantly different than this and you don't understand * the issues involved, don't use bed PID until someone else verifies that your hardware works. */ -//#define PIDTEMPBED +#define PIDTEMPBED //#define BED_LIMIT_SWITCHING @@ -627,14 +635,14 @@ * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** */ #define PREVENT_COLD_EXTRUSION -#define EXTRUDE_MINTEMP 170 +#define EXTRUDE_MINTEMP 180 /** * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. * Note: For Bowden Extruders make this large enough to allow load/unload. */ #define PREVENT_LENGTHY_EXTRUDE -#define EXTRUDE_MAXLENGTH 200 +#define EXTRUDE_MAXLENGTH 350 //=========================================================================== //======================== Thermal Runaway Protection ======================= @@ -688,7 +696,7 @@ #define USE_ZMIN_PLUG //#define USE_XMAX_PLUG //#define USE_YMAX_PLUG -//#define USE_ZMAX_PLUG +#define USE_ZMAX_PLUG // Enable pullup for all endstops to prevent a floating state #define ENDSTOPPULLUPS @@ -717,13 +725,13 @@ #endif // Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. +#define X_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Y_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Z_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. #define X_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. #define Y_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_PROBE_ENDSTOP_INVERTING false // Set to true to invert the logic of the probe. +#define Z_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Z_MIN_PROBE_ENDSTOP_INVERTING true // Set to true to invert the logic of the probe. /** * Stepper Drivers @@ -806,14 +814,14 @@ * Override with M92 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 500 } +#define DEFAULT_AXIS_STEPS_PER_UNIT { 80.4, 80.4, 403.1, 100.7 } /** * Default Max Feed Rate (mm/s) * Override with M203 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 } +#define DEFAULT_MAX_FEEDRATE { 300, 300, 50, 50 } //#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 #if ENABLED(LIMITED_MAX_FR_EDITING) @@ -826,7 +834,7 @@ * Override with M201 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 } +#define DEFAULT_MAX_ACCELERATION { 2000 , 2000, 100, 10000 } //#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 #if ENABLED(LIMITED_MAX_ACCEL_EDITING) @@ -841,9 +849,9 @@ * M204 R Retract Acceleration * M204 T Travel Acceleration */ -#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves +#define DEFAULT_ACCELERATION 800 // X, Y, Z and E acceleration for printing moves #define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves +#define DEFAULT_TRAVEL_ACCELERATION 1500 // X, Y, Z acceleration for travel (non printing) moves /** * Default Jerk limits (mm/s) @@ -890,7 +898,7 @@ * * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained */ -//#define S_CURVE_ACCELERATION +#define S_CURVE_ACCELERATION //=========================================================================== //============================= Z Probe Options ============================= @@ -906,10 +914,10 @@ * The probe replaces the Z-MIN endstop and is used for Z homing. * (Automatically enables USE_PROBE_FOR_Z_HOMING.) */ -#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN +//#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN // Force the use of the probe for Z-axis homing -//#define USE_PROBE_FOR_Z_HOMING +#define USE_PROBE_FOR_Z_HOMING /** * Z_MIN_PROBE_PIN @@ -946,7 +954,7 @@ * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. * (e.g., an inductive probe or a nozzle-based probe-switch.) */ -//#define FIX_MOUNTED_PROBE +#define FIX_MOUNTED_PROBE /** * Use the nozzle as the probe, as with a conductive @@ -1055,20 +1063,20 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +#define NOZZLE_TO_PROBE_OFFSET { -25, -8.5, 0 } // Most probes should stay away from the edges of the bed, but // with NOZZLE_AS_PROBE this can be negative for a wider probing area. -#define PROBING_MARGIN 10 +#define PROBING_MARGIN 25 // X and Y axis travel speed (mm/min) between probes -#define XY_PROBE_FEEDRATE (133*60) +#define XY_PROBE_FEEDRATE (66*60) // Feedrate (mm/min) for the first approach when double-probing (MULTIPLE_PROBING == 2) -#define Z_PROBE_FEEDRATE_FAST (4*60) +#define Z_PROBE_FEEDRATE_FAST (10*60) // Feedrate (mm/min) for the "accurate" probe of each point -#define Z_PROBE_FEEDRATE_SLOW (Z_PROBE_FEEDRATE_FAST / 2) +#define Z_PROBE_FEEDRATE_SLOW (Z_PROBE_FEEDRATE_FAST / 4) /** * Probe Activation Switch @@ -1106,7 +1114,7 @@ * A total of 2 does fast/slow probes with a weighted average. * A total of 3 or more adds more slow probes, taking the average. */ -//#define MULTIPLE_PROBING 2 +#define MULTIPLE_PROBING 3 //#define EXTRA_PROBING 1 /** @@ -1190,9 +1198,9 @@ // @section machine // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR false -#define INVERT_Y_DIR true -#define INVERT_Z_DIR false +#define INVERT_X_DIR true +#define INVERT_Y_DIR false +#define INVERT_Z_DIR true // @section extruder @@ -1232,8 +1240,8 @@ // @section machine // The size of the printable area -#define X_BED_SIZE 200 -#define Y_BED_SIZE 200 +#define X_BED_SIZE 220 +#define Y_BED_SIZE 220 // Travel limits (mm) after homing, corresponding to endstop positions. #define X_MIN_POS 0 @@ -1241,7 +1249,7 @@ #define Z_MIN_POS 0 #define X_MAX_POS X_BED_SIZE #define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 200 +#define Z_MAX_POS 250 /** * Software Endstops @@ -1269,7 +1277,7 @@ #endif #if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS) - //#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD + #define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD #endif /** @@ -1285,7 +1293,7 @@ * RAMPS-based boards use SERVO3_PIN for the first runout sensor. * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. */ -//#define FILAMENT_RUNOUT_SENSOR +#define FILAMENT_RUNOUT_SENSOR #if ENABLED(FILAMENT_RUNOUT_SENSOR) #define FIL_RUNOUT_ENABLED_DEFAULT true // Enable the sensor on startup. Override with M412 followed by M500. #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. @@ -1387,7 +1395,7 @@ */ //#define AUTO_BED_LEVELING_3POINT //#define AUTO_BED_LEVELING_LINEAR -//#define AUTO_BED_LEVELING_BILINEAR +#define AUTO_BED_LEVELING_BILINEAR //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING @@ -1396,7 +1404,7 @@ * these options to restore the prior leveling state or to always enable * leveling immediately after G28. */ -//#define RESTORE_LEVELING_AFTER_G28 +#define RESTORE_LEVELING_AFTER_G28 //#define ENABLE_LEVELING_AFTER_G28 /** @@ -1438,15 +1446,15 @@ /** * Enable the G26 Mesh Validation Pattern tool. */ - //#define G26_MESH_VALIDATION + #define G26_MESH_VALIDATION #if ENABLED(G26_MESH_VALIDATION) #define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle. #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for G26. - #define MESH_TEST_HOTEND_TEMP 205 // (°C) Default nozzle temperature for G26. + #define MESH_TEST_HOTEND_TEMP 210 // (°C) Default nozzle temperature for G26. #define MESH_TEST_BED_TEMP 60 // (°C) Default bed temperature for G26. #define G26_XY_FEEDRATE 20 // (mm/s) Feedrate for G26 XY moves. #define G26_XY_FEEDRATE_TRAVEL 100 // (mm/s) Feedrate for G26 XY travel moves. - #define G26_RETRACT_MULTIPLIER 1.0 // G26 Q (retraction) used by default between mesh test elements. + #define G26_RETRACT_MULTIPLIER 1.5 // G26 Q (retraction) used by default between mesh test elements. #endif #endif @@ -1518,7 +1526,7 @@ * Add a bed leveling sub-menu for ABL or MBL. * Include a guided procedure if manual probing is enabled. */ -//#define LCD_BED_LEVELING +#define LCD_BED_LEVELING #if ENABLED(LCD_BED_LEVELING) #define MESH_EDIT_Z_STEP 0.025 // (mm) Step size while manually probing Z axis. @@ -1527,13 +1535,13 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS +#define LEVEL_BED_CORNERS #if ENABLED(LEVEL_BED_CORNERS) #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define LEVEL_CORNERS_HEIGHT 0.05 // (mm) Z height of nozzle at leveling points #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner + #define LEVEL_CENTER_TOO // Move to the center after the last corner //#define LEVEL_CORNERS_USE_PROBE #if ENABLED(LEVEL_CORNERS_USE_PROBE) #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 @@ -1587,7 +1595,7 @@ // - Move the Z probe (or nozzle) to a defined XY point before Z Homing. // - Prevent Z homing when the Z probe is outside bed area. // -//#define Z_SAFE_HOMING +#define Z_SAFE_HOMING #if ENABLED(Z_SAFE_HOMING) #define Z_SAFE_HOMING_X_POINT X_CENTER // X point for Z homing @@ -1595,7 +1603,7 @@ #endif // Homing speeds (mm/min) -#define HOMING_FEEDRATE_MM_M { (50*60), (50*60), (4*60) } +#define HOMING_FEEDRATE_MM_M { (50*60), (50*60), (10*60) } // Validate that endstops are triggered on homing moves #define VALIDATE_HOMING_ENDSTOPS @@ -1672,12 +1680,12 @@ * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) */ -//#define EEPROM_SETTINGS // Persistent storage with M500 and M501 +#define EEPROM_SETTINGS // Persistent storage with M500 and M501 //#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. #define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load #if ENABLED(EEPROM_SETTINGS) - //#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. + #define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. #endif // @@ -1706,17 +1714,23 @@ // Preheat Constants - Up to 5 are supported without changes // #define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 180 +#define PREHEAT_1_TEMP_HOTEND 210 #define PREHEAT_1_TEMP_BED 70 #define PREHEAT_1_TEMP_CHAMBER 35 #define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 -#define PREHEAT_2_LABEL "ABS" +#define PREHEAT_2_LABEL "PETG" #define PREHEAT_2_TEMP_HOTEND 240 -#define PREHEAT_2_TEMP_BED 110 +#define PREHEAT_2_TEMP_BED 80 #define PREHEAT_2_TEMP_CHAMBER 35 #define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 +#define PREHEAT_3_LABEL "ABS" +#define PREHEAT_3_TEMP_HOTEND 240 +#define PREHEAT_3_TEMP_BED 110 +#define PREHEAT_3_TEMP_CHAMBER 35 +#define PREHEAT_3_FAN_SPEED 0 // Value from 0 to 255 + /** * Nozzle Park * @@ -1728,7 +1742,7 @@ * P1 Raise the nozzle always to Z-park height. * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. */ -//#define NOZZLE_PARK_FEATURE +#define NOZZLE_PARK_FEATURE #if ENABLED(NOZZLE_PARK_FEATURE) // Specify a park position as { X, Y, Z_raise } @@ -1936,14 +1950,14 @@ * SD Card support is disabled by default. If your controller has an SD slot, * you must uncomment the following option or it won't work. */ -//#define SDSUPPORT +#define SDSUPPORT /** * SD CARD: ENABLE CRC * * Use CRC checks and retries on the SD communication. */ -//#define SD_CHECK_AND_RETRY +#define SD_CHECK_AND_RETRY /** * LCD Menu Items @@ -2006,7 +2020,7 @@ // // Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. // -//#define INDIVIDUAL_AXIS_HOMING_MENU +#define INDIVIDUAL_AXIS_HOMING_MENU // // SPEAKER/BUZZER @@ -2503,7 +2517,7 @@ // // 320x240, 2.8", FSMC Stock Display from ET4 // -//#define ANET_ET4_TFT28 +#define ANET_ET4_TFT28 // // 480x320, 3.5", FSMC Stock Display from ET5 @@ -2544,12 +2558,39 @@ * root of your SD card, together with the compiled firmware. */ //#define TFT_CLASSIC_UI -//#define TFT_COLOR_UI +#define TFT_COLOR_UI //#define TFT_LVGL_UI -#if ENABLED(TFT_LVGL_UI) - //#define MKS_WIFI_MODULE // MKS WiFi module -#endif +/* ET4/ET5 Black Theme */ + +#define COLOR_RED2 0xF003 // #F70019 +#define COLOR_ORANGE2 0xFDE0 // #FFBE00 +#define COLOR_LIME2 0xA7E0 // #A5FF00 +#define COLOR_BLACK2 0x2124 // #212421 + +#define COLOR_BACKGROUND COLOR_BLACK2 +#define COLOR_SELECTION_BG COLOR_ORANGE2 +#define COLOR_COLD COLOR_WHITE +#define COLOR_HOTEND COLOR_RED2 +#define COLOR_HEATED_BED COLOR_RED2 +#define COLOR_CHAMBER COLOR_WHITE +#define COLOR_FAN COLOR_WHITE +#define COLOR_AXIS_FRAME COLOR_WHITE +#define COLOR_AXIS_HOMED COLOR_ORANGE2 +#define COLOR_AXIS_NOT_HOMED COLOR_ORANGE2 +#define COLOR_RATE_100 COLOR_LIME2 +#define COLOR_RATE_ALTERED COLOR_ORANGE2 +#define COLOR_PRINT_TIME COLOR_WHITE +#define COLOR_PROGRESS_BAR COLOR_ORANGE2 +#define COLOR_STATUS_MESSAGE COLOR_ORANGE2 +#define COLOR_SD_ENABLED COLOR_CONTROL_ENABLED +#define COLOR_SD_DISABLED COLOR_CONTROL_DISABLED +#define COLOR_MENU_TEXT COLOR_WHITE +#define COLOR_MENU_VALUE_FONT COLOR_ORANGE2 +#define COLOR_SLIDER COLOR_ORANGE2 +#define COLOR_INCREASE COLOR_WHITE +#define COLOR_DECREASE COLOR_WHITE +#define COLOR_TICK COLOR_VIVID_GREEN /** * TFT Rotation. Set to one of the following values: @@ -2573,18 +2614,18 @@ // // Touch Screen Settings // -//#define TOUCH_SCREEN +#define TOUCH_SCREEN #if ENABLED(TOUCH_SCREEN) #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus #define TOUCH_SCREEN_CALIBRATION - //#define TOUCH_CALIBRATION_X 12316 - //#define TOUCH_CALIBRATION_Y -8981 - //#define TOUCH_OFFSET_X -43 - //#define TOUCH_OFFSET_Y 257 - //#define TOUCH_ORIENTATION TOUCH_LANDSCAPE + //#define TOUCH_CALIBRATION_X -11838 + //#define TOUCH_CALIBRATION_Y 8776 + //#define TOUCH_OFFSET_X 333 + //#define TOUCH_OFFSET_Y -17 + //#define TOUCH_ORIENTATION TOUCH_PORTRAIT #if BOTH(TOUCH_SCREEN_CALIBRATION, EEPROM_SETTINGS) #define TOUCH_CALIBRATION_AUTO_SAVE // Auto save successful calibration values to EEPROM @@ -2618,7 +2659,7 @@ // Use software PWM to drive the fan, as for the heaters. This uses a very low frequency // which is not as annoying as with the hardware PWM. On the other hand, if this frequency // is too low, you should also increment SOFT_PWM_SCALE. -//#define FAN_SOFT_PWM +#define FAN_SOFT_PWM // Incrementing this by 1 will double the software PWM frequency, // affecting heaters, and the fan if FAN_SOFT_PWM is enabled. diff --git a/config/examples/Anet/ET4+/Configuration_adv.h b/config/examples/Anet/ET4+/Configuration_adv.h index 5335fa012a..9290e7a2b8 100644 --- a/config/examples/Anet/ET4+/Configuration_adv.h +++ b/config/examples/Anet/ET4+/Configuration_adv.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Anet/ET4+" + /** * Configuration_adv.h * @@ -437,7 +439,7 @@ * Hotend Idle Timeout * Prevent filament in the nozzle from charring and causing a critical jam. */ -//#define HOTEND_IDLE_TIMEOUT +#define HOTEND_IDLE_TIMEOUT #if ENABLED(HOTEND_IDLE_TIMEOUT) #define HOTEND_IDLE_TIMEOUT_SEC (5*60) // (seconds) Time without extruder movement to trigger protection #define HOTEND_IDLE_MIN_TRIGGER 180 // (°C) Minimum temperature to enable hotend protection @@ -540,7 +542,7 @@ * Multiple extruders can be assigned to the same pin in which case * the fan will turn on when any selected extruder is above the threshold. */ -#define E0_AUTO_FAN_PIN -1 +//#define E0_AUTO_FAN_PIN -1 #define E1_AUTO_FAN_PIN -1 #define E2_AUTO_FAN_PIN -1 #define E3_AUTO_FAN_PIN -1 @@ -741,7 +743,7 @@ //#define HOMING_BACKOFF_POST_MM { 2, 2, 2 } // (mm) Backoff from endstops after homing -//#define QUICK_HOME // If G28 contains XY do a diagonal move first +#define QUICK_HOME // If G28 contains XY do a diagonal move first //#define HOME_Y_BEFORE_X // If G28 contains XY home Y before X //#define HOME_Z_FIRST // Home Z first. Requires a Z-MIN endstop (not a probe). //#define CODEPENDENT_XY_HOMING // If X/Y can't home without homing Y/X first @@ -951,7 +953,7 @@ * See https://hydraraptor.blogspot.com/2010/12/frequency-limit.html * Use M201 F G to change limits at runtime. */ -//#define XY_FREQUENCY_LIMIT 10 // (Hz) Maximum frequency of small zigzag infill moves. Set with M201 F. +#define XY_FREQUENCY_LIMIT 10 // (Hz) Maximum frequency of small zigzag infill moves. Set with M201 F. #ifdef XY_FREQUENCY_LIMIT #define XY_FREQUENCY_MIN_PERCENT 5 // (percent) Minimum FR percentage to apply. Set with M201 G. #endif @@ -1175,7 +1177,7 @@ #endif // Include a page of printer information in the LCD Main Menu - //#define LCD_INFO_MENU + #define LCD_INFO_MENU #if ENABLED(LCD_INFO_MENU) //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages #endif @@ -1229,7 +1231,7 @@ #endif // Scroll a longer status message into view - //#define STATUS_MESSAGE_SCROLLING + #define STATUS_MESSAGE_SCROLLING // On the Info Screen, display XY with one decimal place when possible //#define LCD_DECIMAL_SMALL_XY @@ -1238,14 +1240,14 @@ //#define LCD_SET_PROGRESS_MANUALLY // Show the E position (filament used) during printing - //#define LCD_SHOW_E_TOTAL + #define LCD_SHOW_E_TOTAL #endif #if EITHER(SDSUPPORT, LCD_SET_PROGRESS_MANUALLY) && ANY(HAS_MARLINUI_U8GLIB, HAS_MARLINUI_HD44780, IS_TFTGLCD_PANEL, EXTENSIBLE_UI) - //#define SHOW_REMAINING_TIME // Display estimated time to completion + #define SHOW_REMAINING_TIME // Display estimated time to completion #if ENABLED(SHOW_REMAINING_TIME) //#define USE_M73_REMAINING_TIME // Use remaining time from M73 command instead of estimation - //#define ROTATE_PROGRESS_DISPLAY // Display (P)rogress, (E)lapsed, and (R)emaining time + #define ROTATE_PROGRESS_DISPLAY // Display (P)rogress, (E)lapsed, and (R)emaining time #endif #if EITHER(HAS_MARLINUI_U8GLIB, EXTENSIBLE_UI) @@ -1315,13 +1317,13 @@ * an option on the LCD screen to continue the print from the last-known * point in the file. */ - //#define POWER_LOSS_RECOVERY + #define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) //#define BACKUP_POWER_SUPPLY // Backup power / UPS to move the steppers on power loss //#define POWER_LOSS_ZRAISE 2 // (mm) Z axis raise on resume (on power loss with UPS) //#define POWER_LOSS_PIN 44 // Pin to detect power loss. Set to -1 to disable default pin on boards without module. - //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss + #define POWER_LOSS_STATE LOW // State of pin indicating power loss //#define POWER_LOSS_PULLUP // Set pullup / pulldown as appropriate for your sensor //#define POWER_LOSS_PULLDOWN //#define POWER_LOSS_PURGE_LEN 20 // (mm) Length of filament to purge on resume @@ -1381,10 +1383,10 @@ //#define UTF_FILENAME_SUPPORT // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT + #define LONG_FILENAME_HOST_SUPPORT // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES + #define SCROLL_LONG_FILENAMES // Leave the heaters on after Stop Print (not recommended!) //#define SD_ABORT_NO_COOLDOWN @@ -1394,7 +1396,7 @@ * This feature must be enabled with "M540 S1" or from the LCD menu. * To have any effect, endstops must be enabled during SD printing. */ - //#define SD_ABORT_ON_ENDSTOP_HIT + #define SD_ABORT_ON_ENDSTOP_HIT /** * This option makes it easier to print the same SD Card file again. @@ -1790,7 +1792,7 @@ * * Warning: Does not respect endstops! */ -//#define BABYSTEPPING +#define BABYSTEPPING #if ENABLED(BABYSTEPPING) //#define INTEGRATED_BABYSTEPPING // EXPERIMENTAL integration of babystepping into the Stepper ISR //#define BABYSTEP_WITHOUT_HOMING @@ -1801,7 +1803,7 @@ #define BABYSTEP_MULTIPLICATOR_Z 1 // (steps or mm) Steps or millimeter distance for each Z babystep #define BABYSTEP_MULTIPLICATOR_XY 1 // (steps or mm) Steps or millimeter distance for each XY babystep - //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. + #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. // Note: Extra time may be added to mitigate controller latency. @@ -1813,7 +1815,7 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 - //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping + #define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping #if ENABLED(BABYSTEP_ZPROBE_OFFSET) //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor @@ -2311,14 +2313,14 @@ * * Enable PARK_HEAD_ON_PAUSE to add the G-code M125 Pause and Park. */ -//#define ADVANCED_PAUSE_FEATURE +#define ADVANCED_PAUSE_FEATURE #if ENABLED(ADVANCED_PAUSE_FEATURE) #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. // This short retract is done immediately, before parking the nozzle. #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast. #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload. + #define FILAMENT_CHANGE_UNLOAD_LENGTH 350 // (mm) The length of filament for a complete unload. // For Bowden, the full length of the tube and nozzle. // For direct drive, the full length of the nozzle. // Set to 0 for manual unloading. @@ -2327,7 +2329,7 @@ // 0 to disable start loading and skip to fast load only #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast. #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle. + #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 350 // (mm) Load length of filament, from extruder gear to nozzle. // For Bowden, the full length of the tube and nozzle. // For direct drive, the full length of the nozzle. //#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted. @@ -2352,7 +2354,7 @@ //#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. //#define HOME_BEFORE_FILAMENT_CHANGE // If needed, home before parking for filament change - //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. + #define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) #endif @@ -2719,7 +2721,7 @@ * Define your own with: * { , , hysteresis_start[1..8] } */ - #define CHOPPER_TIMING CHOPPER_DEFAULT_12V // All axes (override below) + #define CHOPPER_TIMING CHOPPER_DEFAULT_24V // All axes (override below) //#define CHOPPER_TIMING_X CHOPPER_TIMING // For X Axes (override below) //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X //#define CHOPPER_TIMING_Y CHOPPER_TIMING // For Y Axes (override below) @@ -2748,7 +2750,7 @@ * M912 - Clear stepper driver overtemperature pre-warn condition flag. * M122 - Report driver parameters (Requires TMC_DEBUG) */ - //#define MONITOR_DRIVER_STATUS + #define MONITOR_DRIVER_STATUS #if ENABLED(MONITOR_DRIVER_STATUS) #define CURRENT_STEP_DOWN 50 // [mA] @@ -2845,7 +2847,7 @@ * Enable M122 debugging command for TMC stepper drivers. * M122 S0/1 will enable continuous reporting. */ - //#define TMC_DEBUG + #define TMC_DEBUG /** * You can set your own advanced settings by filling in predefined functions. @@ -3414,7 +3416,7 @@ /** * Auto-report temperatures with M155 S */ -#define AUTO_REPORT_TEMPERATURES +//#define AUTO_REPORT_TEMPERATURES /** * Auto-report position with M154 S diff --git a/config/examples/Anet/ET4-Pro/Configuration.h b/config/examples/Anet/ET4-Pro/Configuration.h index 78c2dc9160..0da8d89d85 100644 --- a/config/examples/Anet/ET4-Pro/Configuration.h +++ b/config/examples/Anet/ET4-Pro/Configuration.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Anet/ET4-Pro" + /** * Configuration.h * @@ -69,7 +71,7 @@ // @section info // Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes. +#define STRING_CONFIG_H_AUTHOR "(davidtgbe, default config)" // Who made the changes. //#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) /** @@ -102,7 +104,7 @@ * * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] */ -#define SERIAL_PORT 0 +#define SERIAL_PORT 1 /** * Select a secondary serial port on the board to use for communication with the host. @@ -127,18 +129,18 @@ * * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ -#define BAUDRATE 250000 +#define BAUDRATE 115200 // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH // Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_RAMPS_14_EFB + #define MOTHERBOARD BOARD_ANET_ET4P #endif // Name displayed in the LCD "Ready" message and Info menu -//#define CUSTOM_MACHINE_NAME "3D Printer" +#define CUSTOM_MACHINE_NAME "Anet ET4 Pro" // Printer's unique ID, used by some programs to differentiate between machines. // Choose your own or use a service like https://www.uuidgenerator.net/version4 @@ -424,7 +426,7 @@ #define TEMP_SENSOR_5 0 #define TEMP_SENSOR_6 0 #define TEMP_SENSOR_7 0 -#define TEMP_SENSOR_BED 0 +#define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 #define TEMP_SENSOR_COOLER 0 @@ -445,12 +447,12 @@ #define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10 #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 -#define TEMP_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target +#define TEMP_WINDOW 3 // (°C) Temperature proximity for the "temperature reached" timer +#define TEMP_HYSTERESIS 5 // (°C) Temperature proximity considered "close enough" to the target #define TEMP_BED_RESIDENCY_TIME 10 // (seconds) Time to wait for bed to "settle" in M190 -#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target +#define TEMP_BED_WINDOW 3 // (°C) Temperature proximity for the "temperature reached" timer +#define TEMP_BED_HYSTERESIS 5 // (°C) Temperature proximity considered "close enough" to the target #define TEMP_CHAMBER_RESIDENCY_TIME 10 // (seconds) Time to wait for chamber to "settle" in M191 #define TEMP_CHAMBER_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer @@ -472,7 +474,7 @@ // Above this temperature the heater will be switched off. // This can protect components from overheating, but NOT from shorts and failures. // (Use MINTEMP for thermistor short/failure protection.) -#define HEATER_0_MAXTEMP 275 +#define HEATER_0_MAXTEMP 260 #define HEATER_1_MAXTEMP 275 #define HEATER_2_MAXTEMP 275 #define HEATER_3_MAXTEMP 275 @@ -480,7 +482,7 @@ #define HEATER_5_MAXTEMP 275 #define HEATER_6_MAXTEMP 275 #define HEATER_7_MAXTEMP 275 -#define BED_MAXTEMP 150 +#define BED_MAXTEMP 110 #define CHAMBER_MAXTEMP 60 /** @@ -505,21 +507,27 @@ #define PID_K1 0.95 // Smoothing factor within any PID loop #if ENABLED(PIDTEMP) - //#define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) - //#define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) + #define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) + #define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) // Set/get with gcode: M301 E[extruder number, 0-2] #if ENABLED(PID_PARAMS_PER_HOTEND) // Specify between 1 and HOTENDS values per array. // If fewer than EXTRUDER values are provided, the last element will be repeated. - #define DEFAULT_Kp_LIST { 22.20, 22.20 } - #define DEFAULT_Ki_LIST { 1.08, 1.08 } - #define DEFAULT_Kd_LIST { 114.00, 114.00 } + #define DEFAULT_Kp_LIST { 18.62, 18.62 } + #define DEFAULT_Ki_LIST { 1.38, 1.38 } + #define DEFAULT_Kd_LIST { 62.92, 62.92 } #else - #define DEFAULT_Kp 22.20 - #define DEFAULT_Ki 1.08 - #define DEFAULT_Kd 114.00 + // ET4 Default settings + //#define DEFAULT_Kp 40.00 + //#define DEFAULT_Ki 0.70 + //#define DEFAULT_Kd 50.00 + + // ET4 Autotune PID results + #define DEFAULT_Kp 18.62 + #define DEFAULT_Ki 1.38 + #define DEFAULT_Kd 62.92 #endif #endif // PIDTEMP @@ -540,7 +548,7 @@ * heater. If your configuration is significantly different than this and you don't understand * the issues involved, don't use bed PID until someone else verifies that your hardware works. */ -//#define PIDTEMPBED +#define PIDTEMPBED //#define BED_LIMIT_SWITCHING @@ -627,14 +635,14 @@ * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** */ #define PREVENT_COLD_EXTRUSION -#define EXTRUDE_MINTEMP 170 +#define EXTRUDE_MINTEMP 180 /** * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. * Note: For Bowden Extruders make this large enough to allow load/unload. */ #define PREVENT_LENGTHY_EXTRUDE -#define EXTRUDE_MAXLENGTH 200 +#define EXTRUDE_MAXLENGTH 350 //=========================================================================== //======================== Thermal Runaway Protection ======================= @@ -717,13 +725,13 @@ #endif // Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. +#define X_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Y_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Z_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. #define X_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. #define Y_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_PROBE_ENDSTOP_INVERTING false // Set to true to invert the logic of the probe. +#define Z_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Z_MIN_PROBE_ENDSTOP_INVERTING true // Set to true to invert the logic of the probe. /** * Stepper Drivers @@ -743,15 +751,15 @@ * TMC5130, TMC5130_STANDALONE, TMC5160, TMC5160_STANDALONE * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'L6474', 'POWERSTEP01', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2160', 'TMC2160_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC2209', 'TMC2209_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE', 'TMC5160', 'TMC5160_STANDALONE'] */ -#define X_DRIVER_TYPE A4988 -#define Y_DRIVER_TYPE A4988 -#define Z_DRIVER_TYPE A4988 +#define X_DRIVER_TYPE TMC2208_STANDALONE +#define Y_DRIVER_TYPE TMC2208_STANDALONE +#define Z_DRIVER_TYPE TMC2208_STANDALONE //#define X2_DRIVER_TYPE A4988 //#define Y2_DRIVER_TYPE A4988 //#define Z2_DRIVER_TYPE A4988 //#define Z3_DRIVER_TYPE A4988 //#define Z4_DRIVER_TYPE A4988 -#define E0_DRIVER_TYPE A4988 +#define E0_DRIVER_TYPE TMC2208_STANDALONE //#define E1_DRIVER_TYPE A4988 //#define E2_DRIVER_TYPE A4988 //#define E3_DRIVER_TYPE A4988 @@ -806,14 +814,14 @@ * Override with M92 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 500 } +#define DEFAULT_AXIS_STEPS_PER_UNIT { 80.4, 80.4, 403.1, 100.7 } /** * Default Max Feed Rate (mm/s) * Override with M203 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 } +#define DEFAULT_MAX_FEEDRATE { 300, 300, 50, 50 } //#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 #if ENABLED(LIMITED_MAX_FR_EDITING) @@ -826,7 +834,7 @@ * Override with M201 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 } +#define DEFAULT_MAX_ACCELERATION { 2000 , 2000, 100, 10000 } //#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 #if ENABLED(LIMITED_MAX_ACCEL_EDITING) @@ -841,9 +849,9 @@ * M204 R Retract Acceleration * M204 T Travel Acceleration */ -#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves +#define DEFAULT_ACCELERATION 800 // X, Y, Z and E acceleration for printing moves #define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves +#define DEFAULT_TRAVEL_ACCELERATION 1500 // X, Y, Z acceleration for travel (non printing) moves /** * Default Jerk limits (mm/s) @@ -890,7 +898,7 @@ * * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained */ -//#define S_CURVE_ACCELERATION +#define S_CURVE_ACCELERATION //=========================================================================== //============================= Z Probe Options ============================= @@ -906,10 +914,10 @@ * The probe replaces the Z-MIN endstop and is used for Z homing. * (Automatically enables USE_PROBE_FOR_Z_HOMING.) */ -#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN +//#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN // Force the use of the probe for Z-axis homing -//#define USE_PROBE_FOR_Z_HOMING +#define USE_PROBE_FOR_Z_HOMING /** * Z_MIN_PROBE_PIN @@ -946,7 +954,7 @@ * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. * (e.g., an inductive probe or a nozzle-based probe-switch.) */ -//#define FIX_MOUNTED_PROBE +#define FIX_MOUNTED_PROBE /** * Use the nozzle as the probe, as with a conductive @@ -1055,20 +1063,20 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +#define NOZZLE_TO_PROBE_OFFSET { -25, -8.5, 0 } // Most probes should stay away from the edges of the bed, but // with NOZZLE_AS_PROBE this can be negative for a wider probing area. -#define PROBING_MARGIN 10 +#define PROBING_MARGIN 25 // X and Y axis travel speed (mm/min) between probes -#define XY_PROBE_FEEDRATE (133*60) +#define XY_PROBE_FEEDRATE (66*60) // Feedrate (mm/min) for the first approach when double-probing (MULTIPLE_PROBING == 2) -#define Z_PROBE_FEEDRATE_FAST (4*60) +#define Z_PROBE_FEEDRATE_FAST (10*60) // Feedrate (mm/min) for the "accurate" probe of each point -#define Z_PROBE_FEEDRATE_SLOW (Z_PROBE_FEEDRATE_FAST / 2) +#define Z_PROBE_FEEDRATE_SLOW (Z_PROBE_FEEDRATE_FAST / 4) /** * Probe Activation Switch @@ -1106,7 +1114,7 @@ * A total of 2 does fast/slow probes with a weighted average. * A total of 3 or more adds more slow probes, taking the average. */ -//#define MULTIPLE_PROBING 2 +#define MULTIPLE_PROBING 3 //#define EXTRA_PROBING 1 /** @@ -1190,9 +1198,9 @@ // @section machine // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR false -#define INVERT_Y_DIR true -#define INVERT_Z_DIR false +#define INVERT_X_DIR true +#define INVERT_Y_DIR false +#define INVERT_Z_DIR true // @section extruder @@ -1232,8 +1240,8 @@ // @section machine // The size of the printable area -#define X_BED_SIZE 200 -#define Y_BED_SIZE 200 +#define X_BED_SIZE 220 +#define Y_BED_SIZE 220 // Travel limits (mm) after homing, corresponding to endstop positions. #define X_MIN_POS 0 @@ -1241,7 +1249,7 @@ #define Z_MIN_POS 0 #define X_MAX_POS X_BED_SIZE #define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 200 +#define Z_MAX_POS 250 /** * Software Endstops @@ -1269,7 +1277,7 @@ #endif #if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS) - //#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD + #define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD #endif /** @@ -1285,7 +1293,7 @@ * RAMPS-based boards use SERVO3_PIN for the first runout sensor. * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. */ -//#define FILAMENT_RUNOUT_SENSOR +#define FILAMENT_RUNOUT_SENSOR #if ENABLED(FILAMENT_RUNOUT_SENSOR) #define FIL_RUNOUT_ENABLED_DEFAULT true // Enable the sensor on startup. Override with M412 followed by M500. #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. @@ -1387,7 +1395,7 @@ */ //#define AUTO_BED_LEVELING_3POINT //#define AUTO_BED_LEVELING_LINEAR -//#define AUTO_BED_LEVELING_BILINEAR +#define AUTO_BED_LEVELING_BILINEAR //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING @@ -1396,7 +1404,7 @@ * these options to restore the prior leveling state or to always enable * leveling immediately after G28. */ -//#define RESTORE_LEVELING_AFTER_G28 +#define RESTORE_LEVELING_AFTER_G28 //#define ENABLE_LEVELING_AFTER_G28 /** @@ -1438,15 +1446,15 @@ /** * Enable the G26 Mesh Validation Pattern tool. */ - //#define G26_MESH_VALIDATION + #define G26_MESH_VALIDATION #if ENABLED(G26_MESH_VALIDATION) #define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle. #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for G26. - #define MESH_TEST_HOTEND_TEMP 205 // (°C) Default nozzle temperature for G26. + #define MESH_TEST_HOTEND_TEMP 210 // (°C) Default nozzle temperature for G26. #define MESH_TEST_BED_TEMP 60 // (°C) Default bed temperature for G26. #define G26_XY_FEEDRATE 20 // (mm/s) Feedrate for G26 XY moves. #define G26_XY_FEEDRATE_TRAVEL 100 // (mm/s) Feedrate for G26 XY travel moves. - #define G26_RETRACT_MULTIPLIER 1.0 // G26 Q (retraction) used by default between mesh test elements. + #define G26_RETRACT_MULTIPLIER 1.5 // G26 Q (retraction) used by default between mesh test elements. #endif #endif @@ -1518,7 +1526,7 @@ * Add a bed leveling sub-menu for ABL or MBL. * Include a guided procedure if manual probing is enabled. */ -//#define LCD_BED_LEVELING +#define LCD_BED_LEVELING #if ENABLED(LCD_BED_LEVELING) #define MESH_EDIT_Z_STEP 0.025 // (mm) Step size while manually probing Z axis. @@ -1527,13 +1535,13 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS +#define LEVEL_BED_CORNERS #if ENABLED(LEVEL_BED_CORNERS) #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define LEVEL_CORNERS_HEIGHT 0.05 // (mm) Z height of nozzle at leveling points #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner + #define LEVEL_CENTER_TOO // Move to the center after the last corner //#define LEVEL_CORNERS_USE_PROBE #if ENABLED(LEVEL_CORNERS_USE_PROBE) #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 @@ -1587,7 +1595,7 @@ // - Move the Z probe (or nozzle) to a defined XY point before Z Homing. // - Prevent Z homing when the Z probe is outside bed area. // -//#define Z_SAFE_HOMING +#define Z_SAFE_HOMING #if ENABLED(Z_SAFE_HOMING) #define Z_SAFE_HOMING_X_POINT X_CENTER // X point for Z homing @@ -1595,7 +1603,7 @@ #endif // Homing speeds (mm/min) -#define HOMING_FEEDRATE_MM_M { (50*60), (50*60), (4*60) } +#define HOMING_FEEDRATE_MM_M { (50*60), (50*60), (10*60) } // Validate that endstops are triggered on homing moves #define VALIDATE_HOMING_ENDSTOPS @@ -1672,12 +1680,12 @@ * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) */ -//#define EEPROM_SETTINGS // Persistent storage with M500 and M501 +#define EEPROM_SETTINGS // Persistent storage with M500 and M501 //#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. #define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load #if ENABLED(EEPROM_SETTINGS) - //#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. + #define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. #endif // @@ -1706,17 +1714,23 @@ // Preheat Constants - Up to 5 are supported without changes // #define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 180 +#define PREHEAT_1_TEMP_HOTEND 210 #define PREHEAT_1_TEMP_BED 70 #define PREHEAT_1_TEMP_CHAMBER 35 #define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 -#define PREHEAT_2_LABEL "ABS" +#define PREHEAT_2_LABEL "PETG" #define PREHEAT_2_TEMP_HOTEND 240 -#define PREHEAT_2_TEMP_BED 110 +#define PREHEAT_2_TEMP_BED 80 #define PREHEAT_2_TEMP_CHAMBER 35 #define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 +#define PREHEAT_3_LABEL "ABS" +#define PREHEAT_3_TEMP_HOTEND 240 +#define PREHEAT_3_TEMP_BED 110 +#define PREHEAT_3_TEMP_CHAMBER 35 +#define PREHEAT_3_FAN_SPEED 0 // Value from 0 to 255 + /** * Nozzle Park * @@ -1728,7 +1742,7 @@ * P1 Raise the nozzle always to Z-park height. * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. */ -//#define NOZZLE_PARK_FEATURE +#define NOZZLE_PARK_FEATURE #if ENABLED(NOZZLE_PARK_FEATURE) // Specify a park position as { X, Y, Z_raise } @@ -1936,14 +1950,14 @@ * SD Card support is disabled by default. If your controller has an SD slot, * you must uncomment the following option or it won't work. */ -//#define SDSUPPORT +#define SDSUPPORT /** * SD CARD: ENABLE CRC * * Use CRC checks and retries on the SD communication. */ -//#define SD_CHECK_AND_RETRY +#define SD_CHECK_AND_RETRY /** * LCD Menu Items @@ -2006,7 +2020,7 @@ // // Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. // -//#define INDIVIDUAL_AXIS_HOMING_MENU +#define INDIVIDUAL_AXIS_HOMING_MENU // // SPEAKER/BUZZER @@ -2503,7 +2517,7 @@ // // 320x240, 2.8", FSMC Stock Display from ET4 // -//#define ANET_ET4_TFT28 +#define ANET_ET4_TFT28 // // 480x320, 3.5", FSMC Stock Display from ET5 @@ -2544,12 +2558,39 @@ * root of your SD card, together with the compiled firmware. */ //#define TFT_CLASSIC_UI -//#define TFT_COLOR_UI +#define TFT_COLOR_UI //#define TFT_LVGL_UI -#if ENABLED(TFT_LVGL_UI) - //#define MKS_WIFI_MODULE // MKS WiFi module -#endif +/* ET4/ET5 Black Theme */ + +#define COLOR_RED2 0xF003 // #F70019 +#define COLOR_ORANGE2 0xFDE0 // #FFBE00 +#define COLOR_LIME2 0xA7E0 // #A5FF00 +#define COLOR_BLACK2 0x2124 // #212421 + +#define COLOR_BACKGROUND COLOR_BLACK2 +#define COLOR_SELECTION_BG COLOR_ORANGE2 +#define COLOR_COLD COLOR_WHITE +#define COLOR_HOTEND COLOR_RED2 +#define COLOR_HEATED_BED COLOR_RED2 +#define COLOR_CHAMBER COLOR_WHITE +#define COLOR_FAN COLOR_WHITE +#define COLOR_AXIS_FRAME COLOR_WHITE +#define COLOR_AXIS_HOMED COLOR_ORANGE2 +#define COLOR_AXIS_NOT_HOMED COLOR_ORANGE2 +#define COLOR_RATE_100 COLOR_LIME2 +#define COLOR_RATE_ALTERED COLOR_ORANGE2 +#define COLOR_PRINT_TIME COLOR_WHITE +#define COLOR_PROGRESS_BAR COLOR_ORANGE2 +#define COLOR_STATUS_MESSAGE COLOR_ORANGE2 +#define COLOR_SD_ENABLED COLOR_CONTROL_ENABLED +#define COLOR_SD_DISABLED COLOR_CONTROL_DISABLED +#define COLOR_MENU_TEXT COLOR_WHITE +#define COLOR_MENU_VALUE_FONT COLOR_ORANGE2 +#define COLOR_SLIDER COLOR_ORANGE2 +#define COLOR_INCREASE COLOR_WHITE +#define COLOR_DECREASE COLOR_WHITE +#define COLOR_TICK COLOR_VIVID_GREEN /** * TFT Rotation. Set to one of the following values: @@ -2573,18 +2614,18 @@ // // Touch Screen Settings // -//#define TOUCH_SCREEN +#define TOUCH_SCREEN #if ENABLED(TOUCH_SCREEN) #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus #define TOUCH_SCREEN_CALIBRATION - //#define TOUCH_CALIBRATION_X 12316 - //#define TOUCH_CALIBRATION_Y -8981 - //#define TOUCH_OFFSET_X -43 - //#define TOUCH_OFFSET_Y 257 - //#define TOUCH_ORIENTATION TOUCH_LANDSCAPE + //#define TOUCH_CALIBRATION_X -11838 + //#define TOUCH_CALIBRATION_Y 8776 + //#define TOUCH_OFFSET_X 333 + //#define TOUCH_OFFSET_Y -17 + //#define TOUCH_ORIENTATION TOUCH_PORTRAIT #if BOTH(TOUCH_SCREEN_CALIBRATION, EEPROM_SETTINGS) #define TOUCH_CALIBRATION_AUTO_SAVE // Auto save successful calibration values to EEPROM @@ -2618,7 +2659,7 @@ // Use software PWM to drive the fan, as for the heaters. This uses a very low frequency // which is not as annoying as with the hardware PWM. On the other hand, if this frequency // is too low, you should also increment SOFT_PWM_SCALE. -//#define FAN_SOFT_PWM +#define FAN_SOFT_PWM // Incrementing this by 1 will double the software PWM frequency, // affecting heaters, and the fan if FAN_SOFT_PWM is enabled. diff --git a/config/examples/Anet/ET4-Pro/Configuration_adv.h b/config/examples/Anet/ET4-Pro/Configuration_adv.h index 5335fa012a..dc504e1217 100644 --- a/config/examples/Anet/ET4-Pro/Configuration_adv.h +++ b/config/examples/Anet/ET4-Pro/Configuration_adv.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Anet/ET4-Pro" + /** * Configuration_adv.h * @@ -437,7 +439,7 @@ * Hotend Idle Timeout * Prevent filament in the nozzle from charring and causing a critical jam. */ -//#define HOTEND_IDLE_TIMEOUT +#define HOTEND_IDLE_TIMEOUT #if ENABLED(HOTEND_IDLE_TIMEOUT) #define HOTEND_IDLE_TIMEOUT_SEC (5*60) // (seconds) Time without extruder movement to trigger protection #define HOTEND_IDLE_MIN_TRIGGER 180 // (°C) Minimum temperature to enable hotend protection @@ -540,7 +542,7 @@ * Multiple extruders can be assigned to the same pin in which case * the fan will turn on when any selected extruder is above the threshold. */ -#define E0_AUTO_FAN_PIN -1 +//#define E0_AUTO_FAN_PIN -1 #define E1_AUTO_FAN_PIN -1 #define E2_AUTO_FAN_PIN -1 #define E3_AUTO_FAN_PIN -1 @@ -741,7 +743,7 @@ //#define HOMING_BACKOFF_POST_MM { 2, 2, 2 } // (mm) Backoff from endstops after homing -//#define QUICK_HOME // If G28 contains XY do a diagonal move first +#define QUICK_HOME // If G28 contains XY do a diagonal move first //#define HOME_Y_BEFORE_X // If G28 contains XY home Y before X //#define HOME_Z_FIRST // Home Z first. Requires a Z-MIN endstop (not a probe). //#define CODEPENDENT_XY_HOMING // If X/Y can't home without homing Y/X first @@ -951,7 +953,7 @@ * See https://hydraraptor.blogspot.com/2010/12/frequency-limit.html * Use M201 F G to change limits at runtime. */ -//#define XY_FREQUENCY_LIMIT 10 // (Hz) Maximum frequency of small zigzag infill moves. Set with M201 F. +#define XY_FREQUENCY_LIMIT 10 // (Hz) Maximum frequency of small zigzag infill moves. Set with M201 F. #ifdef XY_FREQUENCY_LIMIT #define XY_FREQUENCY_MIN_PERCENT 5 // (percent) Minimum FR percentage to apply. Set with M201 G. #endif @@ -1175,7 +1177,7 @@ #endif // Include a page of printer information in the LCD Main Menu - //#define LCD_INFO_MENU + #define LCD_INFO_MENU #if ENABLED(LCD_INFO_MENU) //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages #endif @@ -1229,7 +1231,7 @@ #endif // Scroll a longer status message into view - //#define STATUS_MESSAGE_SCROLLING + #define STATUS_MESSAGE_SCROLLING // On the Info Screen, display XY with one decimal place when possible //#define LCD_DECIMAL_SMALL_XY @@ -1238,14 +1240,14 @@ //#define LCD_SET_PROGRESS_MANUALLY // Show the E position (filament used) during printing - //#define LCD_SHOW_E_TOTAL + #define LCD_SHOW_E_TOTAL #endif #if EITHER(SDSUPPORT, LCD_SET_PROGRESS_MANUALLY) && ANY(HAS_MARLINUI_U8GLIB, HAS_MARLINUI_HD44780, IS_TFTGLCD_PANEL, EXTENSIBLE_UI) - //#define SHOW_REMAINING_TIME // Display estimated time to completion + #define SHOW_REMAINING_TIME // Display estimated time to completion #if ENABLED(SHOW_REMAINING_TIME) //#define USE_M73_REMAINING_TIME // Use remaining time from M73 command instead of estimation - //#define ROTATE_PROGRESS_DISPLAY // Display (P)rogress, (E)lapsed, and (R)emaining time + #define ROTATE_PROGRESS_DISPLAY // Display (P)rogress, (E)lapsed, and (R)emaining time #endif #if EITHER(HAS_MARLINUI_U8GLIB, EXTENSIBLE_UI) @@ -1315,13 +1317,13 @@ * an option on the LCD screen to continue the print from the last-known * point in the file. */ - //#define POWER_LOSS_RECOVERY + #define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) //#define BACKUP_POWER_SUPPLY // Backup power / UPS to move the steppers on power loss //#define POWER_LOSS_ZRAISE 2 // (mm) Z axis raise on resume (on power loss with UPS) //#define POWER_LOSS_PIN 44 // Pin to detect power loss. Set to -1 to disable default pin on boards without module. - //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss + #define POWER_LOSS_STATE LOW // State of pin indicating power loss //#define POWER_LOSS_PULLUP // Set pullup / pulldown as appropriate for your sensor //#define POWER_LOSS_PULLDOWN //#define POWER_LOSS_PURGE_LEN 20 // (mm) Length of filament to purge on resume @@ -1381,10 +1383,10 @@ //#define UTF_FILENAME_SUPPORT // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT + #define LONG_FILENAME_HOST_SUPPORT // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES + #define SCROLL_LONG_FILENAMES // Leave the heaters on after Stop Print (not recommended!) //#define SD_ABORT_NO_COOLDOWN @@ -1394,7 +1396,7 @@ * This feature must be enabled with "M540 S1" or from the LCD menu. * To have any effect, endstops must be enabled during SD printing. */ - //#define SD_ABORT_ON_ENDSTOP_HIT + #define SD_ABORT_ON_ENDSTOP_HIT /** * This option makes it easier to print the same SD Card file again. @@ -1790,7 +1792,7 @@ * * Warning: Does not respect endstops! */ -//#define BABYSTEPPING +#define BABYSTEPPING #if ENABLED(BABYSTEPPING) //#define INTEGRATED_BABYSTEPPING // EXPERIMENTAL integration of babystepping into the Stepper ISR //#define BABYSTEP_WITHOUT_HOMING @@ -1801,7 +1803,7 @@ #define BABYSTEP_MULTIPLICATOR_Z 1 // (steps or mm) Steps or millimeter distance for each Z babystep #define BABYSTEP_MULTIPLICATOR_XY 1 // (steps or mm) Steps or millimeter distance for each XY babystep - //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. + #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. // Note: Extra time may be added to mitigate controller latency. @@ -1813,7 +1815,7 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 - //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping + #define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping #if ENABLED(BABYSTEP_ZPROBE_OFFSET) //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor @@ -2311,14 +2313,14 @@ * * Enable PARK_HEAD_ON_PAUSE to add the G-code M125 Pause and Park. */ -//#define ADVANCED_PAUSE_FEATURE +#define ADVANCED_PAUSE_FEATURE #if ENABLED(ADVANCED_PAUSE_FEATURE) #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. // This short retract is done immediately, before parking the nozzle. #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast. #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload. + #define FILAMENT_CHANGE_UNLOAD_LENGTH 350 // (mm) The length of filament for a complete unload. // For Bowden, the full length of the tube and nozzle. // For direct drive, the full length of the nozzle. // Set to 0 for manual unloading. @@ -2327,7 +2329,7 @@ // 0 to disable start loading and skip to fast load only #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast. #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle. + #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 350 // (mm) Load length of filament, from extruder gear to nozzle. // For Bowden, the full length of the tube and nozzle. // For direct drive, the full length of the nozzle. //#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted. @@ -2352,7 +2354,7 @@ //#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. //#define HOME_BEFORE_FILAMENT_CHANGE // If needed, home before parking for filament change - //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. + #define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) #endif @@ -2719,7 +2721,7 @@ * Define your own with: * { , , hysteresis_start[1..8] } */ - #define CHOPPER_TIMING CHOPPER_DEFAULT_12V // All axes (override below) + #define CHOPPER_TIMING CHOPPER_DEFAULT_24V // All axes (override below) //#define CHOPPER_TIMING_X CHOPPER_TIMING // For X Axes (override below) //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X //#define CHOPPER_TIMING_Y CHOPPER_TIMING // For Y Axes (override below) @@ -2748,7 +2750,7 @@ * M912 - Clear stepper driver overtemperature pre-warn condition flag. * M122 - Report driver parameters (Requires TMC_DEBUG) */ - //#define MONITOR_DRIVER_STATUS + #define MONITOR_DRIVER_STATUS #if ENABLED(MONITOR_DRIVER_STATUS) #define CURRENT_STEP_DOWN 50 // [mA] @@ -2845,7 +2847,7 @@ * Enable M122 debugging command for TMC stepper drivers. * M122 S0/1 will enable continuous reporting. */ - //#define TMC_DEBUG + #define TMC_DEBUG /** * You can set your own advanced settings by filling in predefined functions. @@ -3414,7 +3416,7 @@ /** * Auto-report temperatures with M155 S */ -#define AUTO_REPORT_TEMPERATURES +//#define AUTO_REPORT_TEMPERATURES /** * Auto-report position with M154 S diff --git a/config/examples/Anet/ET4/Configuration.h b/config/examples/Anet/ET4/Configuration.h index 78c2dc9160..39d7a6974b 100644 --- a/config/examples/Anet/ET4/Configuration.h +++ b/config/examples/Anet/ET4/Configuration.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Anet/ET4" + /** * Configuration.h * @@ -102,7 +104,7 @@ * * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] */ -#define SERIAL_PORT 0 +#define SERIAL_PORT 1 /** * Select a secondary serial port on the board to use for communication with the host. @@ -127,18 +129,18 @@ * * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ -#define BAUDRATE 250000 +#define BAUDRATE 115200 // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH // Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_RAMPS_14_EFB + #define MOTHERBOARD BOARD_ANET_ET4 #endif // Name displayed in the LCD "Ready" message and Info menu -//#define CUSTOM_MACHINE_NAME "3D Printer" +#define CUSTOM_MACHINE_NAME "Anet ET4" // Printer's unique ID, used by some programs to differentiate between machines. // Choose your own or use a service like https://www.uuidgenerator.net/version4 @@ -424,7 +426,7 @@ #define TEMP_SENSOR_5 0 #define TEMP_SENSOR_6 0 #define TEMP_SENSOR_7 0 -#define TEMP_SENSOR_BED 0 +#define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 #define TEMP_SENSOR_COOLER 0 @@ -445,12 +447,12 @@ #define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10 #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 -#define TEMP_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target +#define TEMP_WINDOW 3 // (°C) Temperature proximity for the "temperature reached" timer +#define TEMP_HYSTERESIS 5 // (°C) Temperature proximity considered "close enough" to the target #define TEMP_BED_RESIDENCY_TIME 10 // (seconds) Time to wait for bed to "settle" in M190 -#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target +#define TEMP_BED_WINDOW 3 // (°C) Temperature proximity for the "temperature reached" timer +#define TEMP_BED_HYSTERESIS 5 // (°C) Temperature proximity considered "close enough" to the target #define TEMP_CHAMBER_RESIDENCY_TIME 10 // (seconds) Time to wait for chamber to "settle" in M191 #define TEMP_CHAMBER_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer @@ -472,7 +474,7 @@ // Above this temperature the heater will be switched off. // This can protect components from overheating, but NOT from shorts and failures. // (Use MINTEMP for thermistor short/failure protection.) -#define HEATER_0_MAXTEMP 275 +#define HEATER_0_MAXTEMP 260 #define HEATER_1_MAXTEMP 275 #define HEATER_2_MAXTEMP 275 #define HEATER_3_MAXTEMP 275 @@ -480,7 +482,7 @@ #define HEATER_5_MAXTEMP 275 #define HEATER_6_MAXTEMP 275 #define HEATER_7_MAXTEMP 275 -#define BED_MAXTEMP 150 +#define BED_MAXTEMP 110 #define CHAMBER_MAXTEMP 60 /** @@ -505,21 +507,27 @@ #define PID_K1 0.95 // Smoothing factor within any PID loop #if ENABLED(PIDTEMP) - //#define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) - //#define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) + #define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) + #define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) // Set/get with gcode: M301 E[extruder number, 0-2] #if ENABLED(PID_PARAMS_PER_HOTEND) // Specify between 1 and HOTENDS values per array. // If fewer than EXTRUDER values are provided, the last element will be repeated. - #define DEFAULT_Kp_LIST { 22.20, 22.20 } - #define DEFAULT_Ki_LIST { 1.08, 1.08 } - #define DEFAULT_Kd_LIST { 114.00, 114.00 } + #define DEFAULT_Kp_LIST { 18.62, 18.62 } + #define DEFAULT_Ki_LIST { 1.38, 1.38 } + #define DEFAULT_Kd_LIST { 62.92, 62.92 } #else - #define DEFAULT_Kp 22.20 - #define DEFAULT_Ki 1.08 - #define DEFAULT_Kd 114.00 + // ET4 Default settings + //#define DEFAULT_Kp 40.00 + //#define DEFAULT_Ki 0.70 + //#define DEFAULT_Kd 50.00 + + // ET4 Autotune PID results + #define DEFAULT_Kp 18.62 + #define DEFAULT_Ki 1.38 + #define DEFAULT_Kd 62.92 #endif #endif // PIDTEMP @@ -540,7 +548,7 @@ * heater. If your configuration is significantly different than this and you don't understand * the issues involved, don't use bed PID until someone else verifies that your hardware works. */ -//#define PIDTEMPBED +#define PIDTEMPBED //#define BED_LIMIT_SWITCHING @@ -627,14 +635,14 @@ * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** */ #define PREVENT_COLD_EXTRUSION -#define EXTRUDE_MINTEMP 170 +#define EXTRUDE_MINTEMP 180 /** * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. * Note: For Bowden Extruders make this large enough to allow load/unload. */ #define PREVENT_LENGTHY_EXTRUDE -#define EXTRUDE_MAXLENGTH 200 +#define EXTRUDE_MAXLENGTH 350 //=========================================================================== //======================== Thermal Runaway Protection ======================= @@ -688,7 +696,7 @@ #define USE_ZMIN_PLUG //#define USE_XMAX_PLUG //#define USE_YMAX_PLUG -//#define USE_ZMAX_PLUG +#define USE_ZMAX_PLUG // Enable pullup for all endstops to prevent a floating state #define ENDSTOPPULLUPS @@ -717,13 +725,13 @@ #endif // Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. +#define X_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Y_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Z_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. #define X_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. #define Y_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_PROBE_ENDSTOP_INVERTING false // Set to true to invert the logic of the probe. +#define Z_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Z_MIN_PROBE_ENDSTOP_INVERTING true // Set to true to invert the logic of the probe. /** * Stepper Drivers @@ -806,14 +814,14 @@ * Override with M92 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 500 } +#define DEFAULT_AXIS_STEPS_PER_UNIT { 80.4, 80.4, 403.1, 100.7 } /** * Default Max Feed Rate (mm/s) * Override with M203 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 } +#define DEFAULT_MAX_FEEDRATE { 300, 300, 50, 50 } //#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 #if ENABLED(LIMITED_MAX_FR_EDITING) @@ -826,7 +834,7 @@ * Override with M201 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 } +#define DEFAULT_MAX_ACCELERATION { 2000 , 2000, 100, 10000 } //#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 #if ENABLED(LIMITED_MAX_ACCEL_EDITING) @@ -841,9 +849,9 @@ * M204 R Retract Acceleration * M204 T Travel Acceleration */ -#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves +#define DEFAULT_ACCELERATION 800 // X, Y, Z and E acceleration for printing moves #define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves +#define DEFAULT_TRAVEL_ACCELERATION 1500 // X, Y, Z acceleration for travel (non printing) moves /** * Default Jerk limits (mm/s) @@ -890,7 +898,7 @@ * * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained */ -//#define S_CURVE_ACCELERATION +#define S_CURVE_ACCELERATION //=========================================================================== //============================= Z Probe Options ============================= @@ -906,7 +914,7 @@ * The probe replaces the Z-MIN endstop and is used for Z homing. * (Automatically enables USE_PROBE_FOR_Z_HOMING.) */ -#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN +//#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN // Force the use of the probe for Z-axis homing //#define USE_PROBE_FOR_Z_HOMING @@ -946,7 +954,7 @@ * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. * (e.g., an inductive probe or a nozzle-based probe-switch.) */ -//#define FIX_MOUNTED_PROBE +#define FIX_MOUNTED_PROBE /** * Use the nozzle as the probe, as with a conductive @@ -1055,20 +1063,20 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +#define NOZZLE_TO_PROBE_OFFSET { 0, 0, 0 } // Most probes should stay away from the edges of the bed, but // with NOZZLE_AS_PROBE this can be negative for a wider probing area. -#define PROBING_MARGIN 10 +#define PROBING_MARGIN 25 // X and Y axis travel speed (mm/min) between probes -#define XY_PROBE_FEEDRATE (133*60) +#define XY_PROBE_FEEDRATE (66*60) // Feedrate (mm/min) for the first approach when double-probing (MULTIPLE_PROBING == 2) -#define Z_PROBE_FEEDRATE_FAST (4*60) +#define Z_PROBE_FEEDRATE_FAST (10*60) // Feedrate (mm/min) for the "accurate" probe of each point -#define Z_PROBE_FEEDRATE_SLOW (Z_PROBE_FEEDRATE_FAST / 2) +#define Z_PROBE_FEEDRATE_SLOW (Z_PROBE_FEEDRATE_FAST / 4) /** * Probe Activation Switch @@ -1106,7 +1114,7 @@ * A total of 2 does fast/slow probes with a weighted average. * A total of 3 or more adds more slow probes, taking the average. */ -//#define MULTIPLE_PROBING 2 +#define MULTIPLE_PROBING 3 //#define EXTRA_PROBING 1 /** @@ -1190,9 +1198,9 @@ // @section machine // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR false -#define INVERT_Y_DIR true -#define INVERT_Z_DIR false +#define INVERT_X_DIR true +#define INVERT_Y_DIR false +#define INVERT_Z_DIR true // @section extruder @@ -1227,13 +1235,13 @@ // :[-1,1] #define X_HOME_DIR -1 #define Y_HOME_DIR -1 -#define Z_HOME_DIR -1 +#define Z_HOME_DIR 1 // @section machine // The size of the printable area -#define X_BED_SIZE 200 -#define Y_BED_SIZE 200 +#define X_BED_SIZE 220 +#define Y_BED_SIZE 220 // Travel limits (mm) after homing, corresponding to endstop positions. #define X_MIN_POS 0 @@ -1241,7 +1249,7 @@ #define Z_MIN_POS 0 #define X_MAX_POS X_BED_SIZE #define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 200 +#define Z_MAX_POS 250 /** * Software Endstops @@ -1269,7 +1277,7 @@ #endif #if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS) - //#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD + #define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD #endif /** @@ -1285,7 +1293,7 @@ * RAMPS-based boards use SERVO3_PIN for the first runout sensor. * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. */ -//#define FILAMENT_RUNOUT_SENSOR +#define FILAMENT_RUNOUT_SENSOR #if ENABLED(FILAMENT_RUNOUT_SENSOR) #define FIL_RUNOUT_ENABLED_DEFAULT true // Enable the sensor on startup. Override with M412 followed by M500. #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. @@ -1387,7 +1395,7 @@ */ //#define AUTO_BED_LEVELING_3POINT //#define AUTO_BED_LEVELING_LINEAR -//#define AUTO_BED_LEVELING_BILINEAR +#define AUTO_BED_LEVELING_BILINEAR //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING @@ -1396,7 +1404,7 @@ * these options to restore the prior leveling state or to always enable * leveling immediately after G28. */ -//#define RESTORE_LEVELING_AFTER_G28 +#define RESTORE_LEVELING_AFTER_G28 //#define ENABLE_LEVELING_AFTER_G28 /** @@ -1438,15 +1446,15 @@ /** * Enable the G26 Mesh Validation Pattern tool. */ - //#define G26_MESH_VALIDATION + #define G26_MESH_VALIDATION #if ENABLED(G26_MESH_VALIDATION) #define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle. #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for G26. - #define MESH_TEST_HOTEND_TEMP 205 // (°C) Default nozzle temperature for G26. + #define MESH_TEST_HOTEND_TEMP 210 // (°C) Default nozzle temperature for G26. #define MESH_TEST_BED_TEMP 60 // (°C) Default bed temperature for G26. #define G26_XY_FEEDRATE 20 // (mm/s) Feedrate for G26 XY moves. #define G26_XY_FEEDRATE_TRAVEL 100 // (mm/s) Feedrate for G26 XY travel moves. - #define G26_RETRACT_MULTIPLIER 1.0 // G26 Q (retraction) used by default between mesh test elements. + #define G26_RETRACT_MULTIPLIER 1.5 // G26 Q (retraction) used by default between mesh test elements. #endif #endif @@ -1518,7 +1526,7 @@ * Add a bed leveling sub-menu for ABL or MBL. * Include a guided procedure if manual probing is enabled. */ -//#define LCD_BED_LEVELING +#define LCD_BED_LEVELING #if ENABLED(LCD_BED_LEVELING) #define MESH_EDIT_Z_STEP 0.025 // (mm) Step size while manually probing Z axis. @@ -1527,13 +1535,13 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS +#define LEVEL_BED_CORNERS #if ENABLED(LEVEL_BED_CORNERS) #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define LEVEL_CORNERS_HEIGHT 0.05 // (mm) Z height of nozzle at leveling points #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner + #define LEVEL_CENTER_TOO // Move to the center after the last corner //#define LEVEL_CORNERS_USE_PROBE #if ENABLED(LEVEL_CORNERS_USE_PROBE) #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 @@ -1587,7 +1595,7 @@ // - Move the Z probe (or nozzle) to a defined XY point before Z Homing. // - Prevent Z homing when the Z probe is outside bed area. // -//#define Z_SAFE_HOMING +#define Z_SAFE_HOMING #if ENABLED(Z_SAFE_HOMING) #define Z_SAFE_HOMING_X_POINT X_CENTER // X point for Z homing @@ -1595,7 +1603,7 @@ #endif // Homing speeds (mm/min) -#define HOMING_FEEDRATE_MM_M { (50*60), (50*60), (4*60) } +#define HOMING_FEEDRATE_MM_M { (50*60), (50*60), (10*60) } // Validate that endstops are triggered on homing moves #define VALIDATE_HOMING_ENDSTOPS @@ -1672,12 +1680,12 @@ * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) */ -//#define EEPROM_SETTINGS // Persistent storage with M500 and M501 +#define EEPROM_SETTINGS // Persistent storage with M500 and M501 //#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. #define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load #if ENABLED(EEPROM_SETTINGS) - //#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. + #define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. #endif // @@ -1706,17 +1714,23 @@ // Preheat Constants - Up to 5 are supported without changes // #define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 180 +#define PREHEAT_1_TEMP_HOTEND 210 #define PREHEAT_1_TEMP_BED 70 #define PREHEAT_1_TEMP_CHAMBER 35 #define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 -#define PREHEAT_2_LABEL "ABS" +#define PREHEAT_2_LABEL "PETG" #define PREHEAT_2_TEMP_HOTEND 240 -#define PREHEAT_2_TEMP_BED 110 +#define PREHEAT_2_TEMP_BED 80 #define PREHEAT_2_TEMP_CHAMBER 35 #define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 +#define PREHEAT_3_LABEL "ABS" +#define PREHEAT_3_TEMP_HOTEND 240 +#define PREHEAT_3_TEMP_BED 110 +#define PREHEAT_3_TEMP_CHAMBER 35 +#define PREHEAT_3_FAN_SPEED 0 // Value from 0 to 255 + /** * Nozzle Park * @@ -1728,7 +1742,7 @@ * P1 Raise the nozzle always to Z-park height. * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. */ -//#define NOZZLE_PARK_FEATURE +#define NOZZLE_PARK_FEATURE #if ENABLED(NOZZLE_PARK_FEATURE) // Specify a park position as { X, Y, Z_raise } @@ -1936,14 +1950,14 @@ * SD Card support is disabled by default. If your controller has an SD slot, * you must uncomment the following option or it won't work. */ -//#define SDSUPPORT +#define SDSUPPORT /** * SD CARD: ENABLE CRC * * Use CRC checks and retries on the SD communication. */ -//#define SD_CHECK_AND_RETRY +#define SD_CHECK_AND_RETRY /** * LCD Menu Items @@ -2006,7 +2020,7 @@ // // Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. // -//#define INDIVIDUAL_AXIS_HOMING_MENU +#define INDIVIDUAL_AXIS_HOMING_MENU // // SPEAKER/BUZZER @@ -2503,7 +2517,7 @@ // // 320x240, 2.8", FSMC Stock Display from ET4 // -//#define ANET_ET4_TFT28 +#define ANET_ET4_TFT28 // // 480x320, 3.5", FSMC Stock Display from ET5 @@ -2544,12 +2558,39 @@ * root of your SD card, together with the compiled firmware. */ //#define TFT_CLASSIC_UI -//#define TFT_COLOR_UI +#define TFT_COLOR_UI //#define TFT_LVGL_UI -#if ENABLED(TFT_LVGL_UI) - //#define MKS_WIFI_MODULE // MKS WiFi module -#endif +/* ET4/ET5 Black Theme */ + +#define COLOR_RED2 0xF003 // #F70019 +#define COLOR_ORANGE2 0xFDE0 // #FFBE00 +#define COLOR_LIME2 0xA7E0 // #A5FF00 +#define COLOR_BLACK2 0x2124 // #212421 + +#define COLOR_BACKGROUND COLOR_BLACK2 +#define COLOR_SELECTION_BG COLOR_ORANGE2 +#define COLOR_COLD COLOR_WHITE +#define COLOR_HOTEND COLOR_RED2 +#define COLOR_HEATED_BED COLOR_RED2 +#define COLOR_CHAMBER COLOR_WHITE +#define COLOR_FAN COLOR_WHITE +#define COLOR_AXIS_FRAME COLOR_WHITE +#define COLOR_AXIS_HOMED COLOR_ORANGE2 +#define COLOR_AXIS_NOT_HOMED COLOR_ORANGE2 +#define COLOR_RATE_100 COLOR_LIME2 +#define COLOR_RATE_ALTERED COLOR_ORANGE2 +#define COLOR_PRINT_TIME COLOR_WHITE +#define COLOR_PROGRESS_BAR COLOR_ORANGE2 +#define COLOR_STATUS_MESSAGE COLOR_ORANGE2 +#define COLOR_SD_ENABLED COLOR_CONTROL_ENABLED +#define COLOR_SD_DISABLED COLOR_CONTROL_DISABLED +#define COLOR_MENU_TEXT COLOR_WHITE +#define COLOR_MENU_VALUE_FONT COLOR_ORANGE2 +#define COLOR_SLIDER COLOR_ORANGE2 +#define COLOR_INCREASE COLOR_WHITE +#define COLOR_DECREASE COLOR_WHITE +#define COLOR_TICK COLOR_VIVID_GREEN /** * TFT Rotation. Set to one of the following values: @@ -2573,18 +2614,18 @@ // // Touch Screen Settings // -//#define TOUCH_SCREEN +#define TOUCH_SCREEN #if ENABLED(TOUCH_SCREEN) #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus #define TOUCH_SCREEN_CALIBRATION - //#define TOUCH_CALIBRATION_X 12316 - //#define TOUCH_CALIBRATION_Y -8981 - //#define TOUCH_OFFSET_X -43 - //#define TOUCH_OFFSET_Y 257 - //#define TOUCH_ORIENTATION TOUCH_LANDSCAPE + //#define TOUCH_CALIBRATION_X -11838 + //#define TOUCH_CALIBRATION_Y 8776 + //#define TOUCH_OFFSET_X 333 + //#define TOUCH_OFFSET_Y -17 + //#define TOUCH_ORIENTATION TOUCH_PORTRAIT #if BOTH(TOUCH_SCREEN_CALIBRATION, EEPROM_SETTINGS) #define TOUCH_CALIBRATION_AUTO_SAVE // Auto save successful calibration values to EEPROM @@ -2618,7 +2659,7 @@ // Use software PWM to drive the fan, as for the heaters. This uses a very low frequency // which is not as annoying as with the hardware PWM. On the other hand, if this frequency // is too low, you should also increment SOFT_PWM_SCALE. -//#define FAN_SOFT_PWM +#define FAN_SOFT_PWM // Incrementing this by 1 will double the software PWM frequency, // affecting heaters, and the fan if FAN_SOFT_PWM is enabled. diff --git a/config/examples/Anet/ET4/Configuration_adv.h b/config/examples/Anet/ET4/Configuration_adv.h index 5335fa012a..1d64527d97 100644 --- a/config/examples/Anet/ET4/Configuration_adv.h +++ b/config/examples/Anet/ET4/Configuration_adv.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Anet/ET4" + /** * Configuration_adv.h * @@ -437,7 +439,7 @@ * Hotend Idle Timeout * Prevent filament in the nozzle from charring and causing a critical jam. */ -//#define HOTEND_IDLE_TIMEOUT +#define HOTEND_IDLE_TIMEOUT #if ENABLED(HOTEND_IDLE_TIMEOUT) #define HOTEND_IDLE_TIMEOUT_SEC (5*60) // (seconds) Time without extruder movement to trigger protection #define HOTEND_IDLE_MIN_TRIGGER 180 // (°C) Minimum temperature to enable hotend protection @@ -540,7 +542,7 @@ * Multiple extruders can be assigned to the same pin in which case * the fan will turn on when any selected extruder is above the threshold. */ -#define E0_AUTO_FAN_PIN -1 +//#define E0_AUTO_FAN_PIN -1 #define E1_AUTO_FAN_PIN -1 #define E2_AUTO_FAN_PIN -1 #define E3_AUTO_FAN_PIN -1 @@ -741,7 +743,7 @@ //#define HOMING_BACKOFF_POST_MM { 2, 2, 2 } // (mm) Backoff from endstops after homing -//#define QUICK_HOME // If G28 contains XY do a diagonal move first +#define QUICK_HOME // If G28 contains XY do a diagonal move first //#define HOME_Y_BEFORE_X // If G28 contains XY home Y before X //#define HOME_Z_FIRST // Home Z first. Requires a Z-MIN endstop (not a probe). //#define CODEPENDENT_XY_HOMING // If X/Y can't home without homing Y/X first @@ -951,7 +953,7 @@ * See https://hydraraptor.blogspot.com/2010/12/frequency-limit.html * Use M201 F G to change limits at runtime. */ -//#define XY_FREQUENCY_LIMIT 10 // (Hz) Maximum frequency of small zigzag infill moves. Set with M201 F. +#define XY_FREQUENCY_LIMIT 10 // (Hz) Maximum frequency of small zigzag infill moves. Set with M201 F. #ifdef XY_FREQUENCY_LIMIT #define XY_FREQUENCY_MIN_PERCENT 5 // (percent) Minimum FR percentage to apply. Set with M201 G. #endif @@ -1175,7 +1177,7 @@ #endif // Include a page of printer information in the LCD Main Menu - //#define LCD_INFO_MENU + #define LCD_INFO_MENU #if ENABLED(LCD_INFO_MENU) //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages #endif @@ -1229,7 +1231,7 @@ #endif // Scroll a longer status message into view - //#define STATUS_MESSAGE_SCROLLING + #define STATUS_MESSAGE_SCROLLING // On the Info Screen, display XY with one decimal place when possible //#define LCD_DECIMAL_SMALL_XY @@ -1238,14 +1240,14 @@ //#define LCD_SET_PROGRESS_MANUALLY // Show the E position (filament used) during printing - //#define LCD_SHOW_E_TOTAL + #define LCD_SHOW_E_TOTAL #endif #if EITHER(SDSUPPORT, LCD_SET_PROGRESS_MANUALLY) && ANY(HAS_MARLINUI_U8GLIB, HAS_MARLINUI_HD44780, IS_TFTGLCD_PANEL, EXTENSIBLE_UI) - //#define SHOW_REMAINING_TIME // Display estimated time to completion + #define SHOW_REMAINING_TIME // Display estimated time to completion #if ENABLED(SHOW_REMAINING_TIME) //#define USE_M73_REMAINING_TIME // Use remaining time from M73 command instead of estimation - //#define ROTATE_PROGRESS_DISPLAY // Display (P)rogress, (E)lapsed, and (R)emaining time + #define ROTATE_PROGRESS_DISPLAY // Display (P)rogress, (E)lapsed, and (R)emaining time #endif #if EITHER(HAS_MARLINUI_U8GLIB, EXTENSIBLE_UI) @@ -1315,13 +1317,13 @@ * an option on the LCD screen to continue the print from the last-known * point in the file. */ - //#define POWER_LOSS_RECOVERY + #define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) //#define BACKUP_POWER_SUPPLY // Backup power / UPS to move the steppers on power loss //#define POWER_LOSS_ZRAISE 2 // (mm) Z axis raise on resume (on power loss with UPS) //#define POWER_LOSS_PIN 44 // Pin to detect power loss. Set to -1 to disable default pin on boards without module. - //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss + #define POWER_LOSS_STATE LOW // State of pin indicating power loss //#define POWER_LOSS_PULLUP // Set pullup / pulldown as appropriate for your sensor //#define POWER_LOSS_PULLDOWN //#define POWER_LOSS_PURGE_LEN 20 // (mm) Length of filament to purge on resume @@ -1381,10 +1383,10 @@ //#define UTF_FILENAME_SUPPORT // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT + #define LONG_FILENAME_HOST_SUPPORT // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES + #define SCROLL_LONG_FILENAMES // Leave the heaters on after Stop Print (not recommended!) //#define SD_ABORT_NO_COOLDOWN @@ -1394,7 +1396,7 @@ * This feature must be enabled with "M540 S1" or from the LCD menu. * To have any effect, endstops must be enabled during SD printing. */ - //#define SD_ABORT_ON_ENDSTOP_HIT + #define SD_ABORT_ON_ENDSTOP_HIT /** * This option makes it easier to print the same SD Card file again. @@ -1790,7 +1792,7 @@ * * Warning: Does not respect endstops! */ -//#define BABYSTEPPING +#define BABYSTEPPING #if ENABLED(BABYSTEPPING) //#define INTEGRATED_BABYSTEPPING // EXPERIMENTAL integration of babystepping into the Stepper ISR //#define BABYSTEP_WITHOUT_HOMING @@ -1801,7 +1803,7 @@ #define BABYSTEP_MULTIPLICATOR_Z 1 // (steps or mm) Steps or millimeter distance for each Z babystep #define BABYSTEP_MULTIPLICATOR_XY 1 // (steps or mm) Steps or millimeter distance for each XY babystep - //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. + #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. // Note: Extra time may be added to mitigate controller latency. @@ -1813,7 +1815,7 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 - //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping + #define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping #if ENABLED(BABYSTEP_ZPROBE_OFFSET) //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor @@ -2311,14 +2313,14 @@ * * Enable PARK_HEAD_ON_PAUSE to add the G-code M125 Pause and Park. */ -//#define ADVANCED_PAUSE_FEATURE +#define ADVANCED_PAUSE_FEATURE #if ENABLED(ADVANCED_PAUSE_FEATURE) #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. // This short retract is done immediately, before parking the nozzle. #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast. #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload. + #define FILAMENT_CHANGE_UNLOAD_LENGTH 350 // (mm) The length of filament for a complete unload. // For Bowden, the full length of the tube and nozzle. // For direct drive, the full length of the nozzle. // Set to 0 for manual unloading. @@ -2327,7 +2329,7 @@ // 0 to disable start loading and skip to fast load only #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast. #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle. + #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 350 // (mm) Load length of filament, from extruder gear to nozzle. // For Bowden, the full length of the tube and nozzle. // For direct drive, the full length of the nozzle. //#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted. @@ -2352,7 +2354,7 @@ //#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. //#define HOME_BEFORE_FILAMENT_CHANGE // If needed, home before parking for filament change - //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. + #define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) #endif @@ -2719,7 +2721,7 @@ * Define your own with: * { , , hysteresis_start[1..8] } */ - #define CHOPPER_TIMING CHOPPER_DEFAULT_12V // All axes (override below) + #define CHOPPER_TIMING CHOPPER_DEFAULT_24V // All axes (override below) //#define CHOPPER_TIMING_X CHOPPER_TIMING // For X Axes (override below) //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X //#define CHOPPER_TIMING_Y CHOPPER_TIMING // For Y Axes (override below) @@ -2748,7 +2750,7 @@ * M912 - Clear stepper driver overtemperature pre-warn condition flag. * M122 - Report driver parameters (Requires TMC_DEBUG) */ - //#define MONITOR_DRIVER_STATUS + #define MONITOR_DRIVER_STATUS #if ENABLED(MONITOR_DRIVER_STATUS) #define CURRENT_STEP_DOWN 50 // [mA] @@ -2845,7 +2847,7 @@ * Enable M122 debugging command for TMC stepper drivers. * M122 S0/1 will enable continuous reporting. */ - //#define TMC_DEBUG + #define TMC_DEBUG /** * You can set your own advanced settings by filling in predefined functions. @@ -3414,7 +3416,7 @@ /** * Auto-report temperatures with M155 S */ -#define AUTO_REPORT_TEMPERATURES +//#define AUTO_REPORT_TEMPERATURES /** * Auto-report position with M154 S diff --git a/config/examples/Anet/ET4X/Configuration.h b/config/examples/Anet/ET4X/Configuration.h index 78c2dc9160..047fd7f153 100644 --- a/config/examples/Anet/ET4X/Configuration.h +++ b/config/examples/Anet/ET4X/Configuration.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Anet/ET4X" + /** * Configuration.h * @@ -69,7 +71,7 @@ // @section info // Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes. +#define STRING_CONFIG_H_AUTHOR "(Andrew's ET4X)" // Who made the changes. //#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) /** @@ -102,7 +104,7 @@ * * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] */ -#define SERIAL_PORT 0 +#define SERIAL_PORT 1 /** * Select a secondary serial port on the board to use for communication with the host. @@ -127,18 +129,18 @@ * * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ -#define BAUDRATE 250000 +#define BAUDRATE 115200 // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH // Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_RAMPS_14_EFB + #define MOTHERBOARD BOARD_ANET_ET4 #endif // Name displayed in the LCD "Ready" message and Info menu -//#define CUSTOM_MACHINE_NAME "3D Printer" +#define CUSTOM_MACHINE_NAME "ET4X" // Printer's unique ID, used by some programs to differentiate between machines. // Choose your own or use a service like https://www.uuidgenerator.net/version4 @@ -424,7 +426,7 @@ #define TEMP_SENSOR_5 0 #define TEMP_SENSOR_6 0 #define TEMP_SENSOR_7 0 -#define TEMP_SENSOR_BED 0 +#define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 #define TEMP_SENSOR_COOLER 0 @@ -445,12 +447,12 @@ #define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10 #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 -#define TEMP_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target +#define TEMP_WINDOW 3 // (°C) Temperature proximity for the "temperature reached" timer +#define TEMP_HYSTERESIS 5 // (°C) Temperature proximity considered "close enough" to the target #define TEMP_BED_RESIDENCY_TIME 10 // (seconds) Time to wait for bed to "settle" in M190 -#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target +#define TEMP_BED_WINDOW 3 // (°C) Temperature proximity for the "temperature reached" timer +#define TEMP_BED_HYSTERESIS 5 // (°C) Temperature proximity considered "close enough" to the target #define TEMP_CHAMBER_RESIDENCY_TIME 10 // (seconds) Time to wait for chamber to "settle" in M191 #define TEMP_CHAMBER_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer @@ -472,7 +474,7 @@ // Above this temperature the heater will be switched off. // This can protect components from overheating, but NOT from shorts and failures. // (Use MINTEMP for thermistor short/failure protection.) -#define HEATER_0_MAXTEMP 275 +#define HEATER_0_MAXTEMP 260 #define HEATER_1_MAXTEMP 275 #define HEATER_2_MAXTEMP 275 #define HEATER_3_MAXTEMP 275 @@ -480,7 +482,7 @@ #define HEATER_5_MAXTEMP 275 #define HEATER_6_MAXTEMP 275 #define HEATER_7_MAXTEMP 275 -#define BED_MAXTEMP 150 +#define BED_MAXTEMP 110 #define CHAMBER_MAXTEMP 60 /** @@ -505,21 +507,27 @@ #define PID_K1 0.95 // Smoothing factor within any PID loop #if ENABLED(PIDTEMP) - //#define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) - //#define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) + #define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) + #define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) // Set/get with gcode: M301 E[extruder number, 0-2] #if ENABLED(PID_PARAMS_PER_HOTEND) // Specify between 1 and HOTENDS values per array. // If fewer than EXTRUDER values are provided, the last element will be repeated. - #define DEFAULT_Kp_LIST { 22.20, 22.20 } - #define DEFAULT_Ki_LIST { 1.08, 1.08 } - #define DEFAULT_Kd_LIST { 114.00, 114.00 } + #define DEFAULT_Kp_LIST { 18.62, 18.62 } + #define DEFAULT_Ki_LIST { 1.38, 1.38 } + #define DEFAULT_Kd_LIST { 62.92, 62.92 } #else - #define DEFAULT_Kp 22.20 - #define DEFAULT_Ki 1.08 - #define DEFAULT_Kd 114.00 + // ET4 Default settings + //#define DEFAULT_Kp 40.00 + //#define DEFAULT_Ki 0.70 + //#define DEFAULT_Kd 50.00 + + // ET4 Autotune PID results + #define DEFAULT_Kp 18.62 + #define DEFAULT_Ki 1.38 + #define DEFAULT_Kd 62.92 #endif #endif // PIDTEMP @@ -540,7 +548,7 @@ * heater. If your configuration is significantly different than this and you don't understand * the issues involved, don't use bed PID until someone else verifies that your hardware works. */ -//#define PIDTEMPBED +#define PIDTEMPBED //#define BED_LIMIT_SWITCHING @@ -627,14 +635,14 @@ * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** */ #define PREVENT_COLD_EXTRUSION -#define EXTRUDE_MINTEMP 170 +#define EXTRUDE_MINTEMP 180 /** * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. * Note: For Bowden Extruders make this large enough to allow load/unload. */ #define PREVENT_LENGTHY_EXTRUDE -#define EXTRUDE_MAXLENGTH 200 +#define EXTRUDE_MAXLENGTH 350 //=========================================================================== //======================== Thermal Runaway Protection ======================= @@ -717,13 +725,13 @@ #endif // Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. +#define X_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Y_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Z_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. #define X_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. #define Y_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_PROBE_ENDSTOP_INVERTING false // Set to true to invert the logic of the probe. +#define Z_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Z_MIN_PROBE_ENDSTOP_INVERTING true // Set to true to invert the logic of the probe. /** * Stepper Drivers @@ -806,14 +814,14 @@ * Override with M92 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 500 } +#define DEFAULT_AXIS_STEPS_PER_UNIT { 80.4, 80.4, 403.1, 100.7 } /** * Default Max Feed Rate (mm/s) * Override with M203 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 } +#define DEFAULT_MAX_FEEDRATE { 300, 300, 50, 50 } //#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 #if ENABLED(LIMITED_MAX_FR_EDITING) @@ -826,7 +834,7 @@ * Override with M201 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 } +#define DEFAULT_MAX_ACCELERATION { 2000 , 2000, 100, 10000 } //#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 #if ENABLED(LIMITED_MAX_ACCEL_EDITING) @@ -841,9 +849,9 @@ * M204 R Retract Acceleration * M204 T Travel Acceleration */ -#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves +#define DEFAULT_ACCELERATION 800 // X, Y, Z and E acceleration for printing moves #define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves +#define DEFAULT_TRAVEL_ACCELERATION 1500 // X, Y, Z acceleration for travel (non printing) moves /** * Default Jerk limits (mm/s) @@ -890,7 +898,7 @@ * * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained */ -//#define S_CURVE_ACCELERATION +#define S_CURVE_ACCELERATION //=========================================================================== //============================= Z Probe Options ============================= @@ -906,10 +914,10 @@ * The probe replaces the Z-MIN endstop and is used for Z homing. * (Automatically enables USE_PROBE_FOR_Z_HOMING.) */ -#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN +//#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN // Force the use of the probe for Z-axis homing -//#define USE_PROBE_FOR_Z_HOMING +#define USE_PROBE_FOR_Z_HOMING /** * Z_MIN_PROBE_PIN @@ -946,7 +954,7 @@ * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. * (e.g., an inductive probe or a nozzle-based probe-switch.) */ -//#define FIX_MOUNTED_PROBE +#define FIX_MOUNTED_PROBE /** * Use the nozzle as the probe, as with a conductive @@ -1055,20 +1063,20 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +#define NOZZLE_TO_PROBE_OFFSET { -25, -8.5, 0 } // Most probes should stay away from the edges of the bed, but // with NOZZLE_AS_PROBE this can be negative for a wider probing area. -#define PROBING_MARGIN 10 +#define PROBING_MARGIN 25 // X and Y axis travel speed (mm/min) between probes -#define XY_PROBE_FEEDRATE (133*60) +#define XY_PROBE_FEEDRATE (66*60) // Feedrate (mm/min) for the first approach when double-probing (MULTIPLE_PROBING == 2) -#define Z_PROBE_FEEDRATE_FAST (4*60) +#define Z_PROBE_FEEDRATE_FAST (10*60) // Feedrate (mm/min) for the "accurate" probe of each point -#define Z_PROBE_FEEDRATE_SLOW (Z_PROBE_FEEDRATE_FAST / 2) +#define Z_PROBE_FEEDRATE_SLOW (Z_PROBE_FEEDRATE_FAST / 4) /** * Probe Activation Switch @@ -1106,7 +1114,7 @@ * A total of 2 does fast/slow probes with a weighted average. * A total of 3 or more adds more slow probes, taking the average. */ -//#define MULTIPLE_PROBING 2 +#define MULTIPLE_PROBING 3 //#define EXTRA_PROBING 1 /** @@ -1190,9 +1198,9 @@ // @section machine // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR false -#define INVERT_Y_DIR true -#define INVERT_Z_DIR false +#define INVERT_X_DIR true +#define INVERT_Y_DIR false +#define INVERT_Z_DIR true // @section extruder @@ -1232,16 +1240,16 @@ // @section machine // The size of the printable area -#define X_BED_SIZE 200 -#define Y_BED_SIZE 200 +#define X_BED_SIZE 220 +#define Y_BED_SIZE 220 // Travel limits (mm) after homing, corresponding to endstop positions. -#define X_MIN_POS 0 -#define Y_MIN_POS 0 +#define X_MIN_POS -2 +#define Y_MIN_POS -16 #define Z_MIN_POS 0 #define X_MAX_POS X_BED_SIZE #define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 200 +#define Z_MAX_POS 250 /** * Software Endstops @@ -1269,7 +1277,7 @@ #endif #if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS) - //#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD + #define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD #endif /** @@ -1285,7 +1293,7 @@ * RAMPS-based boards use SERVO3_PIN for the first runout sensor. * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. */ -//#define FILAMENT_RUNOUT_SENSOR +#define FILAMENT_RUNOUT_SENSOR #if ENABLED(FILAMENT_RUNOUT_SENSOR) #define FIL_RUNOUT_ENABLED_DEFAULT true // Enable the sensor on startup. Override with M412 followed by M500. #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. @@ -1387,7 +1395,7 @@ */ //#define AUTO_BED_LEVELING_3POINT //#define AUTO_BED_LEVELING_LINEAR -//#define AUTO_BED_LEVELING_BILINEAR +#define AUTO_BED_LEVELING_BILINEAR //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING @@ -1396,7 +1404,7 @@ * these options to restore the prior leveling state or to always enable * leveling immediately after G28. */ -//#define RESTORE_LEVELING_AFTER_G28 +#define RESTORE_LEVELING_AFTER_G28 //#define ENABLE_LEVELING_AFTER_G28 /** @@ -1438,15 +1446,15 @@ /** * Enable the G26 Mesh Validation Pattern tool. */ - //#define G26_MESH_VALIDATION + #define G26_MESH_VALIDATION #if ENABLED(G26_MESH_VALIDATION) #define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle. #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for G26. - #define MESH_TEST_HOTEND_TEMP 205 // (°C) Default nozzle temperature for G26. + #define MESH_TEST_HOTEND_TEMP 210 // (°C) Default nozzle temperature for G26. #define MESH_TEST_BED_TEMP 60 // (°C) Default bed temperature for G26. #define G26_XY_FEEDRATE 20 // (mm/s) Feedrate for G26 XY moves. #define G26_XY_FEEDRATE_TRAVEL 100 // (mm/s) Feedrate for G26 XY travel moves. - #define G26_RETRACT_MULTIPLIER 1.0 // G26 Q (retraction) used by default between mesh test elements. + #define G26_RETRACT_MULTIPLIER 1.5 // G26 Q (retraction) used by default between mesh test elements. #endif #endif @@ -1518,7 +1526,7 @@ * Add a bed leveling sub-menu for ABL or MBL. * Include a guided procedure if manual probing is enabled. */ -//#define LCD_BED_LEVELING +#define LCD_BED_LEVELING #if ENABLED(LCD_BED_LEVELING) #define MESH_EDIT_Z_STEP 0.025 // (mm) Step size while manually probing Z axis. @@ -1527,13 +1535,13 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS +#define LEVEL_BED_CORNERS #if ENABLED(LEVEL_BED_CORNERS) #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define LEVEL_CORNERS_HEIGHT 0.05 // (mm) Z height of nozzle at leveling points #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner + #define LEVEL_CENTER_TOO // Move to the center after the last corner //#define LEVEL_CORNERS_USE_PROBE #if ENABLED(LEVEL_CORNERS_USE_PROBE) #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 @@ -1587,7 +1595,7 @@ // - Move the Z probe (or nozzle) to a defined XY point before Z Homing. // - Prevent Z homing when the Z probe is outside bed area. // -//#define Z_SAFE_HOMING +#define Z_SAFE_HOMING #if ENABLED(Z_SAFE_HOMING) #define Z_SAFE_HOMING_X_POINT X_CENTER // X point for Z homing @@ -1595,7 +1603,7 @@ #endif // Homing speeds (mm/min) -#define HOMING_FEEDRATE_MM_M { (50*60), (50*60), (4*60) } +#define HOMING_FEEDRATE_MM_M { (50*60), (50*60), (10*60) } // Validate that endstops are triggered on homing moves #define VALIDATE_HOMING_ENDSTOPS @@ -1672,12 +1680,12 @@ * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) */ -//#define EEPROM_SETTINGS // Persistent storage with M500 and M501 +#define EEPROM_SETTINGS // Persistent storage with M500 and M501 //#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. #define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load #if ENABLED(EEPROM_SETTINGS) - //#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. + #define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. #endif // @@ -1706,17 +1714,23 @@ // Preheat Constants - Up to 5 are supported without changes // #define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 180 +#define PREHEAT_1_TEMP_HOTEND 210 #define PREHEAT_1_TEMP_BED 70 #define PREHEAT_1_TEMP_CHAMBER 35 #define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 -#define PREHEAT_2_LABEL "ABS" +#define PREHEAT_2_LABEL "PETG" #define PREHEAT_2_TEMP_HOTEND 240 -#define PREHEAT_2_TEMP_BED 110 +#define PREHEAT_2_TEMP_BED 80 #define PREHEAT_2_TEMP_CHAMBER 35 #define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 +#define PREHEAT_3_LABEL "ABS" +#define PREHEAT_3_TEMP_HOTEND 240 +#define PREHEAT_3_TEMP_BED 110 +#define PREHEAT_3_TEMP_CHAMBER 35 +#define PREHEAT_3_FAN_SPEED 0 // Value from 0 to 255 + /** * Nozzle Park * @@ -1728,7 +1742,7 @@ * P1 Raise the nozzle always to Z-park height. * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. */ -//#define NOZZLE_PARK_FEATURE +#define NOZZLE_PARK_FEATURE #if ENABLED(NOZZLE_PARK_FEATURE) // Specify a park position as { X, Y, Z_raise } @@ -1936,14 +1950,14 @@ * SD Card support is disabled by default. If your controller has an SD slot, * you must uncomment the following option or it won't work. */ -//#define SDSUPPORT +#define SDSUPPORT /** * SD CARD: ENABLE CRC * * Use CRC checks and retries on the SD communication. */ -//#define SD_CHECK_AND_RETRY +#define SD_CHECK_AND_RETRY /** * LCD Menu Items @@ -2006,7 +2020,7 @@ // // Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. // -//#define INDIVIDUAL_AXIS_HOMING_MENU +#define INDIVIDUAL_AXIS_HOMING_MENU // // SPEAKER/BUZZER @@ -2503,7 +2517,7 @@ // // 320x240, 2.8", FSMC Stock Display from ET4 // -//#define ANET_ET4_TFT28 +#define ANET_ET4_TFT28 // // 480x320, 3.5", FSMC Stock Display from ET5 @@ -2544,12 +2558,39 @@ * root of your SD card, together with the compiled firmware. */ //#define TFT_CLASSIC_UI -//#define TFT_COLOR_UI +#define TFT_COLOR_UI //#define TFT_LVGL_UI -#if ENABLED(TFT_LVGL_UI) - //#define MKS_WIFI_MODULE // MKS WiFi module -#endif +/* ET4/ET5 Black Theme */ + +#define COLOR_RED2 0xF003 // #F70019 +#define COLOR_ORANGE2 0xFDE0 // #FFBE00 +#define COLOR_LIME2 0xA7E0 // #A5FF00 +#define COLOR_BLACK2 0x2124 // #212421 + +#define COLOR_BACKGROUND COLOR_BLACK2 +#define COLOR_SELECTION_BG COLOR_ORANGE2 +#define COLOR_COLD COLOR_WHITE +#define COLOR_HOTEND COLOR_RED2 +#define COLOR_HEATED_BED COLOR_RED2 +#define COLOR_CHAMBER COLOR_WHITE +#define COLOR_FAN COLOR_WHITE +#define COLOR_AXIS_FRAME COLOR_WHITE +#define COLOR_AXIS_HOMED COLOR_ORANGE2 +#define COLOR_AXIS_NOT_HOMED COLOR_ORANGE2 +#define COLOR_RATE_100 COLOR_LIME2 +#define COLOR_RATE_ALTERED COLOR_ORANGE2 +#define COLOR_PRINT_TIME COLOR_WHITE +#define COLOR_PROGRESS_BAR COLOR_ORANGE2 +#define COLOR_STATUS_MESSAGE COLOR_ORANGE2 +#define COLOR_SD_ENABLED COLOR_CONTROL_ENABLED +#define COLOR_SD_DISABLED COLOR_CONTROL_DISABLED +#define COLOR_MENU_TEXT COLOR_WHITE +#define COLOR_MENU_VALUE_FONT COLOR_ORANGE2 +#define COLOR_SLIDER COLOR_ORANGE2 +#define COLOR_INCREASE COLOR_WHITE +#define COLOR_DECREASE COLOR_WHITE +#define COLOR_TICK COLOR_VIVID_GREEN /** * TFT Rotation. Set to one of the following values: @@ -2573,18 +2614,18 @@ // // Touch Screen Settings // -//#define TOUCH_SCREEN +#define TOUCH_SCREEN #if ENABLED(TOUCH_SCREEN) #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus #define TOUCH_SCREEN_CALIBRATION - //#define TOUCH_CALIBRATION_X 12316 - //#define TOUCH_CALIBRATION_Y -8981 - //#define TOUCH_OFFSET_X -43 - //#define TOUCH_OFFSET_Y 257 - //#define TOUCH_ORIENTATION TOUCH_LANDSCAPE + //#define TOUCH_CALIBRATION_X -11838 + //#define TOUCH_CALIBRATION_Y 8776 + //#define TOUCH_OFFSET_X 333 + //#define TOUCH_OFFSET_Y -17 + //#define TOUCH_ORIENTATION TOUCH_PORTRAIT #if BOTH(TOUCH_SCREEN_CALIBRATION, EEPROM_SETTINGS) #define TOUCH_CALIBRATION_AUTO_SAVE // Auto save successful calibration values to EEPROM @@ -2618,7 +2659,7 @@ // Use software PWM to drive the fan, as for the heaters. This uses a very low frequency // which is not as annoying as with the hardware PWM. On the other hand, if this frequency // is too low, you should also increment SOFT_PWM_SCALE. -//#define FAN_SOFT_PWM +#define FAN_SOFT_PWM // Incrementing this by 1 will double the software PWM frequency, // affecting heaters, and the fan if FAN_SOFT_PWM is enabled. diff --git a/config/examples/Anet/ET4X/Configuration_adv.h b/config/examples/Anet/ET4X/Configuration_adv.h index 5335fa012a..0617ef45be 100644 --- a/config/examples/Anet/ET4X/Configuration_adv.h +++ b/config/examples/Anet/ET4X/Configuration_adv.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Anet/ET4X" + /** * Configuration_adv.h * @@ -437,7 +439,7 @@ * Hotend Idle Timeout * Prevent filament in the nozzle from charring and causing a critical jam. */ -//#define HOTEND_IDLE_TIMEOUT +#define HOTEND_IDLE_TIMEOUT #if ENABLED(HOTEND_IDLE_TIMEOUT) #define HOTEND_IDLE_TIMEOUT_SEC (5*60) // (seconds) Time without extruder movement to trigger protection #define HOTEND_IDLE_MIN_TRIGGER 180 // (°C) Minimum temperature to enable hotend protection @@ -540,7 +542,7 @@ * Multiple extruders can be assigned to the same pin in which case * the fan will turn on when any selected extruder is above the threshold. */ -#define E0_AUTO_FAN_PIN -1 +//#define E0_AUTO_FAN_PIN -1 #define E1_AUTO_FAN_PIN -1 #define E2_AUTO_FAN_PIN -1 #define E3_AUTO_FAN_PIN -1 @@ -741,7 +743,7 @@ //#define HOMING_BACKOFF_POST_MM { 2, 2, 2 } // (mm) Backoff from endstops after homing -//#define QUICK_HOME // If G28 contains XY do a diagonal move first +#define QUICK_HOME // If G28 contains XY do a diagonal move first //#define HOME_Y_BEFORE_X // If G28 contains XY home Y before X //#define HOME_Z_FIRST // Home Z first. Requires a Z-MIN endstop (not a probe). //#define CODEPENDENT_XY_HOMING // If X/Y can't home without homing Y/X first @@ -951,7 +953,7 @@ * See https://hydraraptor.blogspot.com/2010/12/frequency-limit.html * Use M201 F G to change limits at runtime. */ -//#define XY_FREQUENCY_LIMIT 10 // (Hz) Maximum frequency of small zigzag infill moves. Set with M201 F. +#define XY_FREQUENCY_LIMIT 10 // (Hz) Maximum frequency of small zigzag infill moves. Set with M201 F. #ifdef XY_FREQUENCY_LIMIT #define XY_FREQUENCY_MIN_PERCENT 5 // (percent) Minimum FR percentage to apply. Set with M201 G. #endif @@ -1175,7 +1177,7 @@ #endif // Include a page of printer information in the LCD Main Menu - //#define LCD_INFO_MENU + #define LCD_INFO_MENU #if ENABLED(LCD_INFO_MENU) //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages #endif @@ -1229,7 +1231,7 @@ #endif // Scroll a longer status message into view - //#define STATUS_MESSAGE_SCROLLING + #define STATUS_MESSAGE_SCROLLING // On the Info Screen, display XY with one decimal place when possible //#define LCD_DECIMAL_SMALL_XY @@ -1238,14 +1240,14 @@ //#define LCD_SET_PROGRESS_MANUALLY // Show the E position (filament used) during printing - //#define LCD_SHOW_E_TOTAL + #define LCD_SHOW_E_TOTAL #endif #if EITHER(SDSUPPORT, LCD_SET_PROGRESS_MANUALLY) && ANY(HAS_MARLINUI_U8GLIB, HAS_MARLINUI_HD44780, IS_TFTGLCD_PANEL, EXTENSIBLE_UI) - //#define SHOW_REMAINING_TIME // Display estimated time to completion + #define SHOW_REMAINING_TIME // Display estimated time to completion #if ENABLED(SHOW_REMAINING_TIME) //#define USE_M73_REMAINING_TIME // Use remaining time from M73 command instead of estimation - //#define ROTATE_PROGRESS_DISPLAY // Display (P)rogress, (E)lapsed, and (R)emaining time + #define ROTATE_PROGRESS_DISPLAY // Display (P)rogress, (E)lapsed, and (R)emaining time #endif #if EITHER(HAS_MARLINUI_U8GLIB, EXTENSIBLE_UI) @@ -1315,13 +1317,13 @@ * an option on the LCD screen to continue the print from the last-known * point in the file. */ - //#define POWER_LOSS_RECOVERY + #define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) //#define BACKUP_POWER_SUPPLY // Backup power / UPS to move the steppers on power loss //#define POWER_LOSS_ZRAISE 2 // (mm) Z axis raise on resume (on power loss with UPS) //#define POWER_LOSS_PIN 44 // Pin to detect power loss. Set to -1 to disable default pin on boards without module. - //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss + #define POWER_LOSS_STATE LOW // State of pin indicating power loss //#define POWER_LOSS_PULLUP // Set pullup / pulldown as appropriate for your sensor //#define POWER_LOSS_PULLDOWN //#define POWER_LOSS_PURGE_LEN 20 // (mm) Length of filament to purge on resume @@ -1381,10 +1383,10 @@ //#define UTF_FILENAME_SUPPORT // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT + #define LONG_FILENAME_HOST_SUPPORT // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES + #define SCROLL_LONG_FILENAMES // Leave the heaters on after Stop Print (not recommended!) //#define SD_ABORT_NO_COOLDOWN @@ -1394,7 +1396,7 @@ * This feature must be enabled with "M540 S1" or from the LCD menu. * To have any effect, endstops must be enabled during SD printing. */ - //#define SD_ABORT_ON_ENDSTOP_HIT + #define SD_ABORT_ON_ENDSTOP_HIT /** * This option makes it easier to print the same SD Card file again. @@ -1790,7 +1792,7 @@ * * Warning: Does not respect endstops! */ -//#define BABYSTEPPING +#define BABYSTEPPING #if ENABLED(BABYSTEPPING) //#define INTEGRATED_BABYSTEPPING // EXPERIMENTAL integration of babystepping into the Stepper ISR //#define BABYSTEP_WITHOUT_HOMING @@ -1801,7 +1803,7 @@ #define BABYSTEP_MULTIPLICATOR_Z 1 // (steps or mm) Steps or millimeter distance for each Z babystep #define BABYSTEP_MULTIPLICATOR_XY 1 // (steps or mm) Steps or millimeter distance for each XY babystep - //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. + #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. // Note: Extra time may be added to mitigate controller latency. @@ -1813,7 +1815,7 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 - //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping + #define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping #if ENABLED(BABYSTEP_ZPROBE_OFFSET) //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor @@ -2311,14 +2313,14 @@ * * Enable PARK_HEAD_ON_PAUSE to add the G-code M125 Pause and Park. */ -//#define ADVANCED_PAUSE_FEATURE +#define ADVANCED_PAUSE_FEATURE #if ENABLED(ADVANCED_PAUSE_FEATURE) #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. // This short retract is done immediately, before parking the nozzle. #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast. #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload. + #define FILAMENT_CHANGE_UNLOAD_LENGTH 350 // (mm) The length of filament for a complete unload. // For Bowden, the full length of the tube and nozzle. // For direct drive, the full length of the nozzle. // Set to 0 for manual unloading. @@ -2327,7 +2329,7 @@ // 0 to disable start loading and skip to fast load only #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast. #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle. + #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 350 // (mm) Load length of filament, from extruder gear to nozzle. // For Bowden, the full length of the tube and nozzle. // For direct drive, the full length of the nozzle. //#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted. @@ -2352,7 +2354,7 @@ //#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. //#define HOME_BEFORE_FILAMENT_CHANGE // If needed, home before parking for filament change - //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. + #define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) #endif @@ -2719,7 +2721,7 @@ * Define your own with: * { , , hysteresis_start[1..8] } */ - #define CHOPPER_TIMING CHOPPER_DEFAULT_12V // All axes (override below) + #define CHOPPER_TIMING CHOPPER_DEFAULT_24V // All axes (override below) //#define CHOPPER_TIMING_X CHOPPER_TIMING // For X Axes (override below) //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X //#define CHOPPER_TIMING_Y CHOPPER_TIMING // For Y Axes (override below) @@ -2748,7 +2750,7 @@ * M912 - Clear stepper driver overtemperature pre-warn condition flag. * M122 - Report driver parameters (Requires TMC_DEBUG) */ - //#define MONITOR_DRIVER_STATUS + #define MONITOR_DRIVER_STATUS #if ENABLED(MONITOR_DRIVER_STATUS) #define CURRENT_STEP_DOWN 50 // [mA] @@ -2845,7 +2847,7 @@ * Enable M122 debugging command for TMC stepper drivers. * M122 S0/1 will enable continuous reporting. */ - //#define TMC_DEBUG + #define TMC_DEBUG /** * You can set your own advanced settings by filling in predefined functions. @@ -3414,7 +3416,7 @@ /** * Auto-report temperatures with M155 S */ -#define AUTO_REPORT_TEMPERATURES +//#define AUTO_REPORT_TEMPERATURES /** * Auto-report position with M154 S diff --git a/config/examples/Anet/ET5-Pro/Configuration.h b/config/examples/Anet/ET5-Pro/Configuration.h index 78c2dc9160..640b0e2fb4 100644 --- a/config/examples/Anet/ET5-Pro/Configuration.h +++ b/config/examples/Anet/ET5-Pro/Configuration.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Anet/ET5-Pro" + /** * Configuration.h * @@ -69,7 +71,7 @@ // @section info // Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes. +#define STRING_CONFIG_H_AUTHOR "(thisiskeithb, ET5 Pro)" // Who made the changes. //#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) /** @@ -102,7 +104,7 @@ * * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] */ -#define SERIAL_PORT 0 +#define SERIAL_PORT 1 /** * Select a secondary serial port on the board to use for communication with the host. @@ -127,18 +129,18 @@ * * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ -#define BAUDRATE 250000 +#define BAUDRATE 115200 // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH // Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_RAMPS_14_EFB + #define MOTHERBOARD BOARD_ANET_ET4P #endif // Name displayed in the LCD "Ready" message and Info menu -//#define CUSTOM_MACHINE_NAME "3D Printer" +#define CUSTOM_MACHINE_NAME "Anet ET5 Pro" // Printer's unique ID, used by some programs to differentiate between machines. // Choose your own or use a service like https://www.uuidgenerator.net/version4 @@ -424,7 +426,7 @@ #define TEMP_SENSOR_5 0 #define TEMP_SENSOR_6 0 #define TEMP_SENSOR_7 0 -#define TEMP_SENSOR_BED 0 +#define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 #define TEMP_SENSOR_COOLER 0 @@ -445,12 +447,12 @@ #define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10 #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 -#define TEMP_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target +#define TEMP_WINDOW 3 // (°C) Temperature proximity for the "temperature reached" timer +#define TEMP_HYSTERESIS 5 // (°C) Temperature proximity considered "close enough" to the target #define TEMP_BED_RESIDENCY_TIME 10 // (seconds) Time to wait for bed to "settle" in M190 -#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target +#define TEMP_BED_WINDOW 3 // (°C) Temperature proximity for the "temperature reached" timer +#define TEMP_BED_HYSTERESIS 5 // (°C) Temperature proximity considered "close enough" to the target #define TEMP_CHAMBER_RESIDENCY_TIME 10 // (seconds) Time to wait for chamber to "settle" in M191 #define TEMP_CHAMBER_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer @@ -472,7 +474,7 @@ // Above this temperature the heater will be switched off. // This can protect components from overheating, but NOT from shorts and failures. // (Use MINTEMP for thermistor short/failure protection.) -#define HEATER_0_MAXTEMP 275 +#define HEATER_0_MAXTEMP 265 // 250 + 15 #define HEATER_1_MAXTEMP 275 #define HEATER_2_MAXTEMP 275 #define HEATER_3_MAXTEMP 275 @@ -480,7 +482,7 @@ #define HEATER_5_MAXTEMP 275 #define HEATER_6_MAXTEMP 275 #define HEATER_7_MAXTEMP 275 -#define BED_MAXTEMP 150 +#define BED_MAXTEMP 110 // 100 + 10 #define CHAMBER_MAXTEMP 60 /** @@ -505,8 +507,8 @@ #define PID_K1 0.95 // Smoothing factor within any PID loop #if ENABLED(PIDTEMP) - //#define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) - //#define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) + #define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) + #define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) // Set/get with gcode: M301 E[extruder number, 0-2] @@ -517,9 +519,9 @@ #define DEFAULT_Ki_LIST { 1.08, 1.08 } #define DEFAULT_Kd_LIST { 114.00, 114.00 } #else - #define DEFAULT_Kp 22.20 - #define DEFAULT_Ki 1.08 - #define DEFAULT_Kd 114.00 + #define DEFAULT_Kp 24.04 + #define DEFAULT_Ki 2.03 + #define DEFAULT_Kd 71.17 #endif #endif // PIDTEMP @@ -540,7 +542,7 @@ * heater. If your configuration is significantly different than this and you don't understand * the issues involved, don't use bed PID until someone else verifies that your hardware works. */ -//#define PIDTEMPBED +#define PIDTEMPBED //#define BED_LIMIT_SWITCHING @@ -558,9 +560,9 @@ // 120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) // from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) - #define DEFAULT_bedKp 10.00 - #define DEFAULT_bedKi .023 - #define DEFAULT_bedKd 305.4 + #define DEFAULT_bedKp 76.11 + #define DEFAULT_bedKi 12.86 + #define DEFAULT_bedKd 300.40 // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. #endif // PIDTEMPBED @@ -634,7 +636,7 @@ * Note: For Bowden Extruders make this large enough to allow load/unload. */ #define PREVENT_LENGTHY_EXTRUDE -#define EXTRUDE_MAXLENGTH 200 +#define EXTRUDE_MAXLENGTH 500 //=========================================================================== //======================== Thermal Runaway Protection ======================= @@ -717,13 +719,13 @@ #endif // Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. +#define X_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Y_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Z_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. #define X_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. #define Y_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. #define Z_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_PROBE_ENDSTOP_INVERTING false // Set to true to invert the logic of the probe. +#define Z_MIN_PROBE_ENDSTOP_INVERTING true // Set to true to invert the logic of the probe. /** * Stepper Drivers @@ -743,15 +745,15 @@ * TMC5130, TMC5130_STANDALONE, TMC5160, TMC5160_STANDALONE * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'L6474', 'POWERSTEP01', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2160', 'TMC2160_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC2209', 'TMC2209_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE', 'TMC5160', 'TMC5160_STANDALONE'] */ -#define X_DRIVER_TYPE A4988 -#define Y_DRIVER_TYPE A4988 -#define Z_DRIVER_TYPE A4988 +#define X_DRIVER_TYPE TMC2208_STANDALONE +#define Y_DRIVER_TYPE TMC2208_STANDALONE +#define Z_DRIVER_TYPE TMC2208_STANDALONE //#define X2_DRIVER_TYPE A4988 //#define Y2_DRIVER_TYPE A4988 //#define Z2_DRIVER_TYPE A4988 //#define Z3_DRIVER_TYPE A4988 //#define Z4_DRIVER_TYPE A4988 -#define E0_DRIVER_TYPE A4988 +#define E0_DRIVER_TYPE TMC2208_STANDALONE //#define E1_DRIVER_TYPE A4988 //#define E2_DRIVER_TYPE A4988 //#define E3_DRIVER_TYPE A4988 @@ -806,14 +808,14 @@ * Override with M92 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 500 } +#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 100 } /** * Default Max Feed Rate (mm/s) * Override with M203 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 } +#define DEFAULT_MAX_FEEDRATE { 300, 300, 10, 25 } //#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 #if ENABLED(LIMITED_MAX_FR_EDITING) @@ -877,7 +879,7 @@ * https://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html */ #if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.013 // (mm) Distance from real junction edge + #define JUNCTION_DEVIATION_MM 0.016 // (mm) Distance from real junction edge #define JD_HANDLE_SMALL_SEGMENTS // Use curvature estimation instead of just the junction angle // for small segments (< 1mm) with large junction angles (> 135°). #endif @@ -906,10 +908,10 @@ * The probe replaces the Z-MIN endstop and is used for Z homing. * (Automatically enables USE_PROBE_FOR_Z_HOMING.) */ -#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN +//#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN // Force the use of the probe for Z-axis homing -//#define USE_PROBE_FOR_Z_HOMING +#define USE_PROBE_FOR_Z_HOMING /** * Z_MIN_PROBE_PIN @@ -946,7 +948,7 @@ * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. * (e.g., an inductive probe or a nozzle-based probe-switch.) */ -//#define FIX_MOUNTED_PROBE +#define FIX_MOUNTED_PROBE /** * Use the nozzle as the probe, as with a conductive @@ -1055,7 +1057,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +#define NOZZLE_TO_PROBE_OFFSET { -25, -8.5, 0 } // Most probes should stay away from the edges of the bed, but // with NOZZLE_AS_PROBE this can be negative for a wider probing area. @@ -1065,7 +1067,7 @@ #define XY_PROBE_FEEDRATE (133*60) // Feedrate (mm/min) for the first approach when double-probing (MULTIPLE_PROBING == 2) -#define Z_PROBE_FEEDRATE_FAST (4*60) +#define Z_PROBE_FEEDRATE_FAST (10*60) // Feedrate (mm/min) for the "accurate" probe of each point #define Z_PROBE_FEEDRATE_SLOW (Z_PROBE_FEEDRATE_FAST / 2) @@ -1106,7 +1108,7 @@ * A total of 2 does fast/slow probes with a weighted average. * A total of 3 or more adds more slow probes, taking the average. */ -//#define MULTIPLE_PROBING 2 +#define MULTIPLE_PROBING 2 //#define EXTRA_PROBING 1 /** @@ -1123,7 +1125,7 @@ * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. */ -#define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow +#define Z_CLEARANCE_DEPLOY_PROBE 0 // Z Clearance for Deploy/Stow #define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points #define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes //#define Z_AFTER_PROBING 5 // Z position after probing is done @@ -1135,7 +1137,7 @@ #define Z_PROBE_OFFSET_RANGE_MAX 20 // Enable the M48 repeatability test to test probe accuracy -//#define Z_MIN_PROBE_REPEATABILITY_TEST +#define Z_MIN_PROBE_REPEATABILITY_TEST // Before deploy/stow pause for user confirmation //#define PAUSE_BEFORE_DEPLOY_STOW @@ -1150,7 +1152,7 @@ * These options are most useful for the BLTouch probe, but may also improve * readings with inductive probes and piezo sensors. */ -//#define PROBING_HEATERS_OFF // Turn heaters off when probing +#define PROBING_HEATERS_OFF // Turn heaters off when probing #if ENABLED(PROBING_HEATERS_OFF) //#define WAIT_FOR_BED_HEATER // Wait for bed to heat back up between probes (to improve accuracy) //#define WAIT_FOR_HOTEND // Wait for hotend to heat back up between probes (to improve accuracy & prevent cold extrude) @@ -1190,9 +1192,9 @@ // @section machine // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR false -#define INVERT_Y_DIR true -#define INVERT_Z_DIR false +#define INVERT_X_DIR true +#define INVERT_Y_DIR false +#define INVERT_Z_DIR true // @section extruder @@ -1232,16 +1234,16 @@ // @section machine // The size of the printable area -#define X_BED_SIZE 200 -#define Y_BED_SIZE 200 +#define X_BED_SIZE 300 +#define Y_BED_SIZE 300 // Travel limits (mm) after homing, corresponding to endstop positions. #define X_MIN_POS 0 -#define Y_MIN_POS 0 +#define Y_MIN_POS -18 #define Z_MIN_POS 0 -#define X_MAX_POS X_BED_SIZE -#define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 200 +#define X_MAX_POS X_BED_SIZE + 35 +#define Y_MAX_POS Y_BED_SIZE + 15 +#define Z_MAX_POS 400 /** * Software Endstops @@ -1269,7 +1271,7 @@ #endif #if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS) - //#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD + #define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD #endif /** @@ -1285,7 +1287,7 @@ * RAMPS-based boards use SERVO3_PIN for the first runout sensor. * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. */ -//#define FILAMENT_RUNOUT_SENSOR +#define FILAMENT_RUNOUT_SENSOR #if ENABLED(FILAMENT_RUNOUT_SENSOR) #define FIL_RUNOUT_ENABLED_DEFAULT true // Enable the sensor on startup. Override with M412 followed by M500. #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. @@ -1387,7 +1389,7 @@ */ //#define AUTO_BED_LEVELING_3POINT //#define AUTO_BED_LEVELING_LINEAR -//#define AUTO_BED_LEVELING_BILINEAR +#define AUTO_BED_LEVELING_BILINEAR //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING @@ -1397,7 +1399,7 @@ * leveling immediately after G28. */ //#define RESTORE_LEVELING_AFTER_G28 -//#define ENABLE_LEVELING_AFTER_G28 +#define ENABLE_LEVELING_AFTER_G28 /** * Auto-leveling needs preheating @@ -1454,7 +1456,7 @@ #if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR) // Set the number of grid points per dimension. - #define GRID_MAX_POINTS_X 3 + #define GRID_MAX_POINTS_X 7 #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X // Probe along the Y axis, advancing X after each column @@ -1464,7 +1466,7 @@ // Beyond the probed grid, continue the implied tilt? // Default is to maintain the height of the nearest edge. - //#define EXTRAPOLATE_BEYOND_GRID + #define EXTRAPOLATE_BEYOND_GRID // // Experimental Subdivision of the grid by Catmull-Rom method. @@ -1518,16 +1520,16 @@ * Add a bed leveling sub-menu for ABL or MBL. * Include a guided procedure if manual probing is enabled. */ -//#define LCD_BED_LEVELING +#define LCD_BED_LEVELING #if ENABLED(LCD_BED_LEVELING) #define MESH_EDIT_Z_STEP 0.025 // (mm) Step size while manually probing Z axis. #define LCD_PROBE_Z_RANGE 4 // (mm) Z Range centered on Z_MIN_POS for LCD Z adjustment - //#define MESH_EDIT_MENU // Add a menu to edit mesh points + #define MESH_EDIT_MENU // Add a menu to edit mesh points #endif // Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS +#define LEVEL_BED_CORNERS #if ENABLED(LEVEL_BED_CORNERS) #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets @@ -1587,7 +1589,7 @@ // - Move the Z probe (or nozzle) to a defined XY point before Z Homing. // - Prevent Z homing when the Z probe is outside bed area. // -//#define Z_SAFE_HOMING +#define Z_SAFE_HOMING #if ENABLED(Z_SAFE_HOMING) #define Z_SAFE_HOMING_X_POINT X_CENTER // X point for Z homing @@ -1595,7 +1597,8 @@ #endif // Homing speeds (mm/min) -#define HOMING_FEEDRATE_MM_M { (50*60), (50*60), (4*60) } +#define HOMING_FEEDRATE_Z (6*60) +#define HOMING_FEEDRATE_MM_M { (40*60), (40*60), HOMING_FEEDRATE_Z } // Validate that endstops are triggered on homing moves #define VALIDATE_HOMING_ENDSTOPS @@ -1672,12 +1675,12 @@ * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) */ -//#define EEPROM_SETTINGS // Persistent storage with M500 and M501 +#define EEPROM_SETTINGS // Persistent storage with M500 and M501 //#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. #define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load #if ENABLED(EEPROM_SETTINGS) - //#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. + #define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. #endif // @@ -1706,17 +1709,23 @@ // Preheat Constants - Up to 5 are supported without changes // #define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 180 -#define PREHEAT_1_TEMP_BED 70 +#define PREHEAT_1_TEMP_HOTEND 210 +#define PREHEAT_1_TEMP_BED 60 #define PREHEAT_1_TEMP_CHAMBER 35 #define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 -#define PREHEAT_2_LABEL "ABS" -#define PREHEAT_2_TEMP_HOTEND 240 -#define PREHEAT_2_TEMP_BED 110 +#define PREHEAT_2_LABEL "PETG" +#define PREHEAT_2_TEMP_HOTEND 235 +#define PREHEAT_2_TEMP_BED 70 #define PREHEAT_2_TEMP_CHAMBER 35 #define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 +#define PREHEAT_3_LABEL "ABS" +#define PREHEAT_3_TEMP_HOTEND 240 +#define PREHEAT_3_TEMP_BED 100 +#define PREHEAT_3_TEMP_CHAMBER 35 +#define PREHEAT_3_FAN_SPEED 0 // Value from 0 to 255 + /** * Nozzle Park * @@ -1728,11 +1737,11 @@ * P1 Raise the nozzle always to Z-park height. * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. */ -//#define NOZZLE_PARK_FEATURE +#define NOZZLE_PARK_FEATURE #if ENABLED(NOZZLE_PARK_FEATURE) // Specify a park position as { X, Y, Z_raise } - #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 } + #define NOZZLE_PARK_POINT { (X_MAX_POS - 10), (Y_MIN_POS + 10), 20 } //#define NOZZLE_PARK_X_ONLY // X move only is required to park //#define NOZZLE_PARK_Y_ONLY // Y move only is required to park #define NOZZLE_PARK_Z_RAISE_MIN 2 // (mm) Always raise Z by at least this distance @@ -1936,14 +1945,14 @@ * SD Card support is disabled by default. If your controller has an SD slot, * you must uncomment the following option or it won't work. */ -//#define SDSUPPORT +#define SDSUPPORT /** * SD CARD: ENABLE CRC * * Use CRC checks and retries on the SD communication. */ -//#define SD_CHECK_AND_RETRY +#define SD_CHECK_AND_RETRY /** * LCD Menu Items @@ -2006,7 +2015,7 @@ // // Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. // -//#define INDIVIDUAL_AXIS_HOMING_MENU +#define INDIVIDUAL_AXIS_HOMING_MENU // // SPEAKER/BUZZER @@ -2508,7 +2517,7 @@ // // 480x320, 3.5", FSMC Stock Display from ET5 // -//#define ANET_ET5_TFT35 +#define ANET_ET5_TFT35 // // 1024x600, 7", RGB Stock Display from BIQU-BX @@ -2544,12 +2553,39 @@ * root of your SD card, together with the compiled firmware. */ //#define TFT_CLASSIC_UI -//#define TFT_COLOR_UI +#define TFT_COLOR_UI //#define TFT_LVGL_UI -#if ENABLED(TFT_LVGL_UI) - //#define MKS_WIFI_MODULE // MKS WiFi module -#endif +/* ET4/ET5 Black Theme */ + +#define COLOR_RED2 0xF003 // #F70019 +#define COLOR_ORANGE2 0xFDE0 // #FFBE00 +#define COLOR_LIME2 0xA7E0 // #A5FF00 +#define COLOR_BLACK2 0x2124 // #212421 + +#define COLOR_BACKGROUND COLOR_BLACK2 +#define COLOR_SELECTION_BG COLOR_ORANGE2 +#define COLOR_COLD COLOR_WHITE +#define COLOR_HOTEND COLOR_RED2 +#define COLOR_HEATED_BED COLOR_RED2 +#define COLOR_CHAMBER COLOR_WHITE +#define COLOR_FAN COLOR_WHITE +#define COLOR_AXIS_FRAME COLOR_WHITE +#define COLOR_AXIS_HOMED COLOR_ORANGE2 +#define COLOR_AXIS_NOT_HOMED COLOR_ORANGE2 +#define COLOR_RATE_100 COLOR_LIME2 +#define COLOR_RATE_ALTERED COLOR_ORANGE2 +#define COLOR_PRINT_TIME COLOR_WHITE +#define COLOR_PROGRESS_BAR COLOR_ORANGE2 +#define COLOR_STATUS_MESSAGE COLOR_ORANGE2 +#define COLOR_SD_ENABLED COLOR_CONTROL_ENABLED +#define COLOR_SD_DISABLED COLOR_CONTROL_DISABLED +#define COLOR_MENU_TEXT COLOR_WHITE +#define COLOR_MENU_VALUE_FONT COLOR_ORANGE2 +#define COLOR_SLIDER COLOR_ORANGE2 +#define COLOR_INCREASE COLOR_WHITE +#define COLOR_DECREASE COLOR_WHITE +#define COLOR_TICK COLOR_VIVID_GREEN /** * TFT Rotation. Set to one of the following values: @@ -2573,7 +2609,7 @@ // // Touch Screen Settings // -//#define TOUCH_SCREEN +#define TOUCH_SCREEN #if ENABLED(TOUCH_SCREEN) #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus @@ -2591,7 +2627,7 @@ #endif #if ENABLED(TFT_COLOR_UI) - //#define SINGLE_TOUCH_NAVIGATION + #define SINGLE_TOUCH_NAVIGATION #endif #endif @@ -2618,7 +2654,7 @@ // Use software PWM to drive the fan, as for the heaters. This uses a very low frequency // which is not as annoying as with the hardware PWM. On the other hand, if this frequency // is too low, you should also increment SOFT_PWM_SCALE. -//#define FAN_SOFT_PWM +#define FAN_SOFT_PWM // Incrementing this by 1 will double the software PWM frequency, // affecting heaters, and the fan if FAN_SOFT_PWM is enabled. diff --git a/config/examples/Anet/ET5-Pro/Configuration_adv.h b/config/examples/Anet/ET5-Pro/Configuration_adv.h index 5335fa012a..31e5197eba 100644 --- a/config/examples/Anet/ET5-Pro/Configuration_adv.h +++ b/config/examples/Anet/ET5-Pro/Configuration_adv.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Anet/ET5-Pro" + /** * Configuration_adv.h * @@ -258,7 +260,7 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 20 // Seconds + #define WATCH_TEMP_PERIOD 40 // Seconds #define WATCH_TEMP_INCREASE 2 // Degrees Celsius #endif @@ -266,13 +268,13 @@ * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_BED_PERIOD 180 // Seconds #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds + #define WATCH_BED_TEMP_PERIOD 180 // Seconds #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius #endif @@ -437,9 +439,9 @@ * Hotend Idle Timeout * Prevent filament in the nozzle from charring and causing a critical jam. */ -//#define HOTEND_IDLE_TIMEOUT +#define HOTEND_IDLE_TIMEOUT #if ENABLED(HOTEND_IDLE_TIMEOUT) - #define HOTEND_IDLE_TIMEOUT_SEC (5*60) // (seconds) Time without extruder movement to trigger protection + #define HOTEND_IDLE_TIMEOUT_SEC (10*60) // (seconds) Time without extruder movement to trigger protection #define HOTEND_IDLE_MIN_TRIGGER 180 // (°C) Minimum temperature to enable hotend protection #define HOTEND_IDLE_NOZZLE_TARGET 0 // (°C) Safe temperature for the nozzle after timeout #define HOTEND_IDLE_BED_TARGET 0 // (°C) Safe temperature for the bed after timeout @@ -540,7 +542,7 @@ * Multiple extruders can be assigned to the same pin in which case * the fan will turn on when any selected extruder is above the threshold. */ -#define E0_AUTO_FAN_PIN -1 +//#define E0_AUTO_FAN_PIN -1 #define E1_AUTO_FAN_PIN -1 #define E2_AUTO_FAN_PIN -1 #define E3_AUTO_FAN_PIN -1 @@ -741,7 +743,7 @@ //#define HOMING_BACKOFF_POST_MM { 2, 2, 2 } // (mm) Backoff from endstops after homing -//#define QUICK_HOME // If G28 contains XY do a diagonal move first +#define QUICK_HOME // If G28 contains XY do a diagonal move first //#define HOME_Y_BEFORE_X // If G28 contains XY home Y before X //#define HOME_Z_FIRST // Home Z first. Requires a Z-MIN endstop (not a probe). //#define CODEPENDENT_XY_HOMING // If X/Y can't home without homing Y/X first @@ -878,11 +880,11 @@ // // Add the G35 command to read bed corners to help adjust screws. Requires a bed probe. // -//#define ASSISTED_TRAMMING +#define ASSISTED_TRAMMING #if ENABLED(ASSISTED_TRAMMING) // Define positions for probe points. - #define TRAMMING_POINT_XY { { 20, 20 }, { 180, 20 }, { 180, 180 }, { 20, 180 } } + #define TRAMMING_POINT_XY { { 20, 45 }, { 280, 45 }, { 280, 255 }, { 20, 255 } } // Define position names for probe points. #define TRAMMING_POINT_NAME_1 "Front-Left" @@ -893,7 +895,7 @@ #define RESTORE_LEVELING_AFTER_G35 // Enable to restore leveling setup after operation //#define REPORT_TRAMMING_MM // Report Z deviation (mm) for each point relative to the first - //#define ASSISTED_TRAMMING_WIZARD // Add a Tramming Wizard to the LCD menu + #define ASSISTED_TRAMMING_WIZARD // Add a Tramming Wizard to the LCD menu //#define ASSISTED_TRAMMING_WAIT_POSITION { X_CENTER, Y_CENTER, 30 } // Move the nozzle out of the way for adjustment @@ -903,7 +905,7 @@ * M4: 40 = Clockwise, 41 = Counter-Clockwise * M5: 50 = Clockwise, 51 = Counter-Clockwise */ - #define TRAMMING_SCREW_THREAD 30 + #define TRAMMING_SCREW_THREAD 40 #endif @@ -1160,14 +1162,14 @@ // Add Probe Z Offset calibration to the Z Probe Offsets menu #if HAS_BED_PROBE - //#define PROBE_OFFSET_WIZARD + #define PROBE_OFFSET_WIZARD #if ENABLED(PROBE_OFFSET_WIZARD) // // Enable to init the Probe Z-Offset when starting the Wizard. // Use a height slightly above the estimated nozzle-to-probe Z offset. // For example, with an offset of -5, consider a starting height of -4. // - //#define PROBE_OFFSET_WIZARD_START_Z -4.0 + #define PROBE_OFFSET_WIZARD_START_Z -4.0 // Set a convenient position to do the calibration (probing point and nozzle/bed-distance) //#define PROBE_OFFSET_WIZARD_XY_POS { X_CENTER, Y_CENTER } @@ -1175,7 +1177,7 @@ #endif // Include a page of printer information in the LCD Main Menu - //#define LCD_INFO_MENU + #define LCD_INFO_MENU #if ENABLED(LCD_INFO_MENU) //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages #endif @@ -1229,7 +1231,7 @@ #endif // Scroll a longer status message into view - //#define STATUS_MESSAGE_SCROLLING + #define STATUS_MESSAGE_SCROLLING // On the Info Screen, display XY with one decimal place when possible //#define LCD_DECIMAL_SMALL_XY @@ -1238,7 +1240,7 @@ //#define LCD_SET_PROGRESS_MANUALLY // Show the E position (filament used) during printing - //#define LCD_SHOW_E_TOTAL + #define LCD_SHOW_E_TOTAL #endif #if EITHER(SDSUPPORT, LCD_SET_PROGRESS_MANUALLY) && ANY(HAS_MARLINUI_U8GLIB, HAS_MARLINUI_HD44780, IS_TFTGLCD_PANEL, EXTENSIBLE_UI) @@ -1315,13 +1317,13 @@ * an option on the LCD screen to continue the print from the last-known * point in the file. */ - //#define POWER_LOSS_RECOVERY + #define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) //#define BACKUP_POWER_SUPPLY // Backup power / UPS to move the steppers on power loss //#define POWER_LOSS_ZRAISE 2 // (mm) Z axis raise on resume (on power loss with UPS) //#define POWER_LOSS_PIN 44 // Pin to detect power loss. Set to -1 to disable default pin on boards without module. - //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss + #define POWER_LOSS_STATE LOW // State of pin indicating power loss //#define POWER_LOSS_PULLUP // Set pullup / pulldown as appropriate for your sensor //#define POWER_LOSS_PULLDOWN //#define POWER_LOSS_PURGE_LEN 20 // (mm) Length of filament to purge on resume @@ -1381,10 +1383,10 @@ //#define UTF_FILENAME_SUPPORT // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT + #define LONG_FILENAME_HOST_SUPPORT // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES + #define SCROLL_LONG_FILENAMES // Leave the heaters on after Stop Print (not recommended!) //#define SD_ABORT_NO_COOLDOWN @@ -1790,9 +1792,9 @@ * * Warning: Does not respect endstops! */ -//#define BABYSTEPPING +#define BABYSTEPPING #if ENABLED(BABYSTEPPING) - //#define INTEGRATED_BABYSTEPPING // EXPERIMENTAL integration of babystepping into the Stepper ISR + #define INTEGRATED_BABYSTEPPING // EXPERIMENTAL integration of babystepping into the Stepper ISR //#define BABYSTEP_WITHOUT_HOMING //#define BABYSTEP_ALWAYS_AVAILABLE // Allow babystepping at all times (not just during movement). //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! @@ -1813,7 +1815,7 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 - //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping + #define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping #if ENABLED(BABYSTEP_ZPROBE_OFFSET) //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor @@ -1837,10 +1839,10 @@ * * See https://marlinfw.org/docs/features/lin_advance.html for full instructions. */ -//#define LIN_ADVANCE +#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) //#define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants - #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed + #define LIN_ADVANCE_K 0.00 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // If enabled, this will generate debug information output over USB. //#define EXPERIMENTAL_SCURVE // Enable this option to permit S-Curve Acceleration #endif @@ -1882,8 +1884,8 @@ #if PROBE_SELECTED && !IS_KINEMATIC //#define PROBING_MARGIN_LEFT PROBING_MARGIN //#define PROBING_MARGIN_RIGHT PROBING_MARGIN - //#define PROBING_MARGIN_FRONT PROBING_MARGIN - //#define PROBING_MARGIN_BACK PROBING_MARGIN + #define PROBING_MARGIN_FRONT 20 + #define PROBING_MARGIN_BACK 20 #endif #if EITHER(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL) @@ -2141,7 +2143,7 @@ * Currently handles M108, M112, M410, M876 * NOTE: Not yet implemented for all platforms. */ -//#define EMERGENCY_PARSER +#define EMERGENCY_PARSER /** * Realtime Reporting (requires EMERGENCY_PARSER) @@ -2311,28 +2313,28 @@ * * Enable PARK_HEAD_ON_PAUSE to add the G-code M125 Pause and Park. */ -//#define ADVANCED_PAUSE_FEATURE +#define ADVANCED_PAUSE_FEATURE #if ENABLED(ADVANCED_PAUSE_FEATURE) #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. // This short retract is done immediately, before parking the nozzle. - #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast. + #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 45 // (mm/s) Unload filament feedrate. This can be pretty fast. #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload. + #define FILAMENT_CHANGE_UNLOAD_LENGTH 480 // (mm) The length of filament for a complete unload. // For Bowden, the full length of the tube and nozzle. // For direct drive, the full length of the nozzle. // Set to 0 for manual unloading. #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE 6 // (mm/s) Slow move when starting load. - #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 0 // (mm) Slow length, to allow time to insert material. + #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 25 // (mm) Slow length, to allow time to insert material. // 0 to disable start loading and skip to fast load only - #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast. + #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 45 // (mm/s) Load filament feedrate. This can be pretty fast. #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle. + #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 370 // (mm) Load length of filament, from extruder gear to nozzle. // For Bowden, the full length of the tube and nozzle. // For direct drive, the full length of the nozzle. //#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted. - #define ADVANCED_PAUSE_PURGE_FEEDRATE 3 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate. - #define ADVANCED_PAUSE_PURGE_LENGTH 50 // (mm) Length to extrude after loading. + #define ADVANCED_PAUSE_PURGE_FEEDRATE 5 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate. + #define ADVANCED_PAUSE_PURGE_LENGTH 60 // (mm) Length to extrude after loading. // Set to 0 for manual extrusion. // Filament can be extruded repeatedly from the Filament Change menu // until extrusion is consistent, and to purge old filament. @@ -2345,14 +2347,14 @@ #define FILAMENT_UNLOAD_PURGE_LENGTH 8 // (mm) An unretract is done, then this length is purged. #define FILAMENT_UNLOAD_PURGE_FEEDRATE 25 // (mm/s) feedrate to purge before unload - #define PAUSE_PARK_NOZZLE_TIMEOUT 45 // (seconds) Time limit before the nozzle is turned off for safety. + #define PAUSE_PARK_NOZZLE_TIMEOUT 120 // (seconds) Time limit before the nozzle is turned off for safety. #define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed. #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change. //#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. - //#define HOME_BEFORE_FILAMENT_CHANGE // If needed, home before parking for filament change + #define HOME_BEFORE_FILAMENT_CHANGE // If needed, home before parking for filament change - //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. + #define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) #endif @@ -2719,7 +2721,7 @@ * Define your own with: * { , , hysteresis_start[1..8] } */ - #define CHOPPER_TIMING CHOPPER_DEFAULT_12V // All axes (override below) + #define CHOPPER_TIMING CHOPPER_DEFAULT_24V // All axes (override below) //#define CHOPPER_TIMING_X CHOPPER_TIMING // For X Axes (override below) //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X //#define CHOPPER_TIMING_Y CHOPPER_TIMING // For Y Axes (override below) @@ -3526,7 +3528,7 @@ * * Execute certain G-code commands immediately after power-on. */ -//#define STARTUP_COMMANDS "M17 Z" +#define STARTUP_COMMANDS "M17 Z" /** * G-code Macros @@ -3650,9 +3652,9 @@ * Host Prompt Support enables Marlin to use the host for user prompts so * filament runout and other processes can be managed from the host side. */ -//#define HOST_ACTION_COMMANDS +#define HOST_ACTION_COMMANDS #if ENABLED(HOST_ACTION_COMMANDS) - //#define HOST_PROMPT_SUPPORT + #define HOST_PROMPT_SUPPORT //#define HOST_START_MENU_ITEM // Add a menu item that tells the host to start #endif @@ -3661,10 +3663,7 @@ * * Implement M486 to allow Marlin to skip objects */ -//#define CANCEL_OBJECTS -#if ENABLED(CANCEL_OBJECTS) - #define CANCEL_OBJECTS_REPORTING // Emit the current object as a status message -#endif +#define CANCEL_OBJECTS /** * I2C position encoders for closed loop control. diff --git a/config/examples/Anet/ET5/Configuration.h b/config/examples/Anet/ET5/Configuration.h index 78c2dc9160..4c540b1a89 100644 --- a/config/examples/Anet/ET5/Configuration.h +++ b/config/examples/Anet/ET5/Configuration.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Anet/ET5" + /** * Configuration.h * @@ -69,7 +71,7 @@ // @section info // Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes. +#define STRING_CONFIG_H_AUTHOR "(thisiskeithb, ET5)" // Who made the changes. //#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) /** @@ -102,7 +104,7 @@ * * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] */ -#define SERIAL_PORT 0 +#define SERIAL_PORT 1 /** * Select a secondary serial port on the board to use for communication with the host. @@ -127,18 +129,18 @@ * * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ -#define BAUDRATE 250000 +#define BAUDRATE 115200 // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH // Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_RAMPS_14_EFB + #define MOTHERBOARD BOARD_ANET_ET4 #endif // Name displayed in the LCD "Ready" message and Info menu -//#define CUSTOM_MACHINE_NAME "3D Printer" +#define CUSTOM_MACHINE_NAME "Anet ET5" // Printer's unique ID, used by some programs to differentiate between machines. // Choose your own or use a service like https://www.uuidgenerator.net/version4 @@ -424,7 +426,7 @@ #define TEMP_SENSOR_5 0 #define TEMP_SENSOR_6 0 #define TEMP_SENSOR_7 0 -#define TEMP_SENSOR_BED 0 +#define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 #define TEMP_SENSOR_COOLER 0 @@ -445,12 +447,12 @@ #define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10 #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 -#define TEMP_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target +#define TEMP_WINDOW 3 // (°C) Temperature proximity for the "temperature reached" timer +#define TEMP_HYSTERESIS 5 // (°C) Temperature proximity considered "close enough" to the target #define TEMP_BED_RESIDENCY_TIME 10 // (seconds) Time to wait for bed to "settle" in M190 -#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target +#define TEMP_BED_WINDOW 3 // (°C) Temperature proximity for the "temperature reached" timer +#define TEMP_BED_HYSTERESIS 5 // (°C) Temperature proximity considered "close enough" to the target #define TEMP_CHAMBER_RESIDENCY_TIME 10 // (seconds) Time to wait for chamber to "settle" in M191 #define TEMP_CHAMBER_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer @@ -472,7 +474,7 @@ // Above this temperature the heater will be switched off. // This can protect components from overheating, but NOT from shorts and failures. // (Use MINTEMP for thermistor short/failure protection.) -#define HEATER_0_MAXTEMP 275 +#define HEATER_0_MAXTEMP 265 // 250 + 15 #define HEATER_1_MAXTEMP 275 #define HEATER_2_MAXTEMP 275 #define HEATER_3_MAXTEMP 275 @@ -480,7 +482,7 @@ #define HEATER_5_MAXTEMP 275 #define HEATER_6_MAXTEMP 275 #define HEATER_7_MAXTEMP 275 -#define BED_MAXTEMP 150 +#define BED_MAXTEMP 110 // 100 + 10 #define CHAMBER_MAXTEMP 60 /** @@ -505,8 +507,8 @@ #define PID_K1 0.95 // Smoothing factor within any PID loop #if ENABLED(PIDTEMP) - //#define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) - //#define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) + #define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) + #define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) // Set/get with gcode: M301 E[extruder number, 0-2] @@ -517,9 +519,9 @@ #define DEFAULT_Ki_LIST { 1.08, 1.08 } #define DEFAULT_Kd_LIST { 114.00, 114.00 } #else - #define DEFAULT_Kp 22.20 - #define DEFAULT_Ki 1.08 - #define DEFAULT_Kd 114.00 + #define DEFAULT_Kp 24.04 + #define DEFAULT_Ki 2.03 + #define DEFAULT_Kd 71.17 #endif #endif // PIDTEMP @@ -540,7 +542,7 @@ * heater. If your configuration is significantly different than this and you don't understand * the issues involved, don't use bed PID until someone else verifies that your hardware works. */ -//#define PIDTEMPBED +#define PIDTEMPBED //#define BED_LIMIT_SWITCHING @@ -558,9 +560,9 @@ // 120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) // from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) - #define DEFAULT_bedKp 10.00 - #define DEFAULT_bedKi .023 - #define DEFAULT_bedKd 305.4 + #define DEFAULT_bedKp 76.11 + #define DEFAULT_bedKi 12.86 + #define DEFAULT_bedKd 300.40 // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. #endif // PIDTEMPBED @@ -634,7 +636,7 @@ * Note: For Bowden Extruders make this large enough to allow load/unload. */ #define PREVENT_LENGTHY_EXTRUDE -#define EXTRUDE_MAXLENGTH 200 +#define EXTRUDE_MAXLENGTH 500 //=========================================================================== //======================== Thermal Runaway Protection ======================= @@ -717,13 +719,13 @@ #endif // Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. +#define X_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Y_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Z_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. #define X_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. #define Y_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. #define Z_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_PROBE_ENDSTOP_INVERTING false // Set to true to invert the logic of the probe. +#define Z_MIN_PROBE_ENDSTOP_INVERTING true // Set to true to invert the logic of the probe. /** * Stepper Drivers @@ -806,14 +808,14 @@ * Override with M92 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 500 } +#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 100 } /** * Default Max Feed Rate (mm/s) * Override with M203 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 } +#define DEFAULT_MAX_FEEDRATE { 300, 300, 10, 25 } //#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 #if ENABLED(LIMITED_MAX_FR_EDITING) @@ -877,7 +879,7 @@ * https://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html */ #if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.013 // (mm) Distance from real junction edge + #define JUNCTION_DEVIATION_MM 0.016 // (mm) Distance from real junction edge #define JD_HANDLE_SMALL_SEGMENTS // Use curvature estimation instead of just the junction angle // for small segments (< 1mm) with large junction angles (> 135°). #endif @@ -906,10 +908,10 @@ * The probe replaces the Z-MIN endstop and is used for Z homing. * (Automatically enables USE_PROBE_FOR_Z_HOMING.) */ -#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN +//#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN // Force the use of the probe for Z-axis homing -//#define USE_PROBE_FOR_Z_HOMING +#define USE_PROBE_FOR_Z_HOMING /** * Z_MIN_PROBE_PIN @@ -946,7 +948,7 @@ * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. * (e.g., an inductive probe or a nozzle-based probe-switch.) */ -//#define FIX_MOUNTED_PROBE +#define FIX_MOUNTED_PROBE /** * Use the nozzle as the probe, as with a conductive @@ -1055,7 +1057,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +#define NOZZLE_TO_PROBE_OFFSET { -25, -8.5, 0 } // Most probes should stay away from the edges of the bed, but // with NOZZLE_AS_PROBE this can be negative for a wider probing area. @@ -1065,7 +1067,7 @@ #define XY_PROBE_FEEDRATE (133*60) // Feedrate (mm/min) for the first approach when double-probing (MULTIPLE_PROBING == 2) -#define Z_PROBE_FEEDRATE_FAST (4*60) +#define Z_PROBE_FEEDRATE_FAST (10*60) // Feedrate (mm/min) for the "accurate" probe of each point #define Z_PROBE_FEEDRATE_SLOW (Z_PROBE_FEEDRATE_FAST / 2) @@ -1106,7 +1108,7 @@ * A total of 2 does fast/slow probes with a weighted average. * A total of 3 or more adds more slow probes, taking the average. */ -//#define MULTIPLE_PROBING 2 +#define MULTIPLE_PROBING 2 //#define EXTRA_PROBING 1 /** @@ -1123,7 +1125,7 @@ * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. */ -#define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow +#define Z_CLEARANCE_DEPLOY_PROBE 0 // Z Clearance for Deploy/Stow #define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points #define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes //#define Z_AFTER_PROBING 5 // Z position after probing is done @@ -1135,7 +1137,7 @@ #define Z_PROBE_OFFSET_RANGE_MAX 20 // Enable the M48 repeatability test to test probe accuracy -//#define Z_MIN_PROBE_REPEATABILITY_TEST +#define Z_MIN_PROBE_REPEATABILITY_TEST // Before deploy/stow pause for user confirmation //#define PAUSE_BEFORE_DEPLOY_STOW @@ -1150,7 +1152,7 @@ * These options are most useful for the BLTouch probe, but may also improve * readings with inductive probes and piezo sensors. */ -//#define PROBING_HEATERS_OFF // Turn heaters off when probing +#define PROBING_HEATERS_OFF // Turn heaters off when probing #if ENABLED(PROBING_HEATERS_OFF) //#define WAIT_FOR_BED_HEATER // Wait for bed to heat back up between probes (to improve accuracy) //#define WAIT_FOR_HOTEND // Wait for hotend to heat back up between probes (to improve accuracy & prevent cold extrude) @@ -1190,9 +1192,9 @@ // @section machine // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR false -#define INVERT_Y_DIR true -#define INVERT_Z_DIR false +#define INVERT_X_DIR true +#define INVERT_Y_DIR false +#define INVERT_Z_DIR true // @section extruder @@ -1232,16 +1234,16 @@ // @section machine // The size of the printable area -#define X_BED_SIZE 200 -#define Y_BED_SIZE 200 +#define X_BED_SIZE 300 +#define Y_BED_SIZE 300 // Travel limits (mm) after homing, corresponding to endstop positions. #define X_MIN_POS 0 -#define Y_MIN_POS 0 +#define Y_MIN_POS -18 #define Z_MIN_POS 0 -#define X_MAX_POS X_BED_SIZE -#define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 200 +#define X_MAX_POS X_BED_SIZE + 35 +#define Y_MAX_POS Y_BED_SIZE + 15 +#define Z_MAX_POS 400 /** * Software Endstops @@ -1269,7 +1271,7 @@ #endif #if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS) - //#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD + #define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD #endif /** @@ -1285,7 +1287,7 @@ * RAMPS-based boards use SERVO3_PIN for the first runout sensor. * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. */ -//#define FILAMENT_RUNOUT_SENSOR +#define FILAMENT_RUNOUT_SENSOR #if ENABLED(FILAMENT_RUNOUT_SENSOR) #define FIL_RUNOUT_ENABLED_DEFAULT true // Enable the sensor on startup. Override with M412 followed by M500. #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. @@ -1387,7 +1389,7 @@ */ //#define AUTO_BED_LEVELING_3POINT //#define AUTO_BED_LEVELING_LINEAR -//#define AUTO_BED_LEVELING_BILINEAR +#define AUTO_BED_LEVELING_BILINEAR //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING @@ -1397,7 +1399,7 @@ * leveling immediately after G28. */ //#define RESTORE_LEVELING_AFTER_G28 -//#define ENABLE_LEVELING_AFTER_G28 +#define ENABLE_LEVELING_AFTER_G28 /** * Auto-leveling needs preheating @@ -1454,7 +1456,7 @@ #if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR) // Set the number of grid points per dimension. - #define GRID_MAX_POINTS_X 3 + #define GRID_MAX_POINTS_X 7 #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X // Probe along the Y axis, advancing X after each column @@ -1464,7 +1466,7 @@ // Beyond the probed grid, continue the implied tilt? // Default is to maintain the height of the nearest edge. - //#define EXTRAPOLATE_BEYOND_GRID + #define EXTRAPOLATE_BEYOND_GRID // // Experimental Subdivision of the grid by Catmull-Rom method. @@ -1518,16 +1520,16 @@ * Add a bed leveling sub-menu for ABL or MBL. * Include a guided procedure if manual probing is enabled. */ -//#define LCD_BED_LEVELING +#define LCD_BED_LEVELING #if ENABLED(LCD_BED_LEVELING) #define MESH_EDIT_Z_STEP 0.025 // (mm) Step size while manually probing Z axis. #define LCD_PROBE_Z_RANGE 4 // (mm) Z Range centered on Z_MIN_POS for LCD Z adjustment - //#define MESH_EDIT_MENU // Add a menu to edit mesh points + #define MESH_EDIT_MENU // Add a menu to edit mesh points #endif // Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS +#define LEVEL_BED_CORNERS #if ENABLED(LEVEL_BED_CORNERS) #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets @@ -1587,7 +1589,7 @@ // - Move the Z probe (or nozzle) to a defined XY point before Z Homing. // - Prevent Z homing when the Z probe is outside bed area. // -//#define Z_SAFE_HOMING +#define Z_SAFE_HOMING #if ENABLED(Z_SAFE_HOMING) #define Z_SAFE_HOMING_X_POINT X_CENTER // X point for Z homing @@ -1595,7 +1597,8 @@ #endif // Homing speeds (mm/min) -#define HOMING_FEEDRATE_MM_M { (50*60), (50*60), (4*60) } +#define HOMING_FEEDRATE_Z (6*60) +#define HOMING_FEEDRATE_MM_M { (40*60), (40*60), HOMING_FEEDRATE_Z } // Validate that endstops are triggered on homing moves #define VALIDATE_HOMING_ENDSTOPS @@ -1672,12 +1675,12 @@ * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) */ -//#define EEPROM_SETTINGS // Persistent storage with M500 and M501 +#define EEPROM_SETTINGS // Persistent storage with M500 and M501 //#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. #define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load #if ENABLED(EEPROM_SETTINGS) - //#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. + #define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. #endif // @@ -1706,17 +1709,23 @@ // Preheat Constants - Up to 5 are supported without changes // #define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 180 -#define PREHEAT_1_TEMP_BED 70 +#define PREHEAT_1_TEMP_HOTEND 210 +#define PREHEAT_1_TEMP_BED 60 #define PREHEAT_1_TEMP_CHAMBER 35 #define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 -#define PREHEAT_2_LABEL "ABS" -#define PREHEAT_2_TEMP_HOTEND 240 -#define PREHEAT_2_TEMP_BED 110 +#define PREHEAT_2_LABEL "PETG" +#define PREHEAT_2_TEMP_HOTEND 235 +#define PREHEAT_2_TEMP_BED 70 #define PREHEAT_2_TEMP_CHAMBER 35 #define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 +#define PREHEAT_3_LABEL "ABS" +#define PREHEAT_3_TEMP_HOTEND 240 +#define PREHEAT_3_TEMP_BED 100 +#define PREHEAT_3_TEMP_CHAMBER 35 +#define PREHEAT_3_FAN_SPEED 0 // Value from 0 to 255 + /** * Nozzle Park * @@ -1728,11 +1737,11 @@ * P1 Raise the nozzle always to Z-park height. * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. */ -//#define NOZZLE_PARK_FEATURE +#define NOZZLE_PARK_FEATURE #if ENABLED(NOZZLE_PARK_FEATURE) // Specify a park position as { X, Y, Z_raise } - #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 } + #define NOZZLE_PARK_POINT { (X_MAX_POS - 10), (Y_MIN_POS + 10), 20 } //#define NOZZLE_PARK_X_ONLY // X move only is required to park //#define NOZZLE_PARK_Y_ONLY // Y move only is required to park #define NOZZLE_PARK_Z_RAISE_MIN 2 // (mm) Always raise Z by at least this distance @@ -1936,14 +1945,14 @@ * SD Card support is disabled by default. If your controller has an SD slot, * you must uncomment the following option or it won't work. */ -//#define SDSUPPORT +#define SDSUPPORT /** * SD CARD: ENABLE CRC * * Use CRC checks and retries on the SD communication. */ -//#define SD_CHECK_AND_RETRY +#define SD_CHECK_AND_RETRY /** * LCD Menu Items @@ -2006,7 +2015,7 @@ // // Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. // -//#define INDIVIDUAL_AXIS_HOMING_MENU +#define INDIVIDUAL_AXIS_HOMING_MENU // // SPEAKER/BUZZER @@ -2508,7 +2517,7 @@ // // 480x320, 3.5", FSMC Stock Display from ET5 // -//#define ANET_ET5_TFT35 +#define ANET_ET5_TFT35 // // 1024x600, 7", RGB Stock Display from BIQU-BX @@ -2544,12 +2553,39 @@ * root of your SD card, together with the compiled firmware. */ //#define TFT_CLASSIC_UI -//#define TFT_COLOR_UI +#define TFT_COLOR_UI //#define TFT_LVGL_UI -#if ENABLED(TFT_LVGL_UI) - //#define MKS_WIFI_MODULE // MKS WiFi module -#endif +/* ET4/ET5 Black Theme */ + +#define COLOR_RED2 0xF003 // #F70019 +#define COLOR_ORANGE2 0xFDE0 // #FFBE00 +#define COLOR_LIME2 0xA7E0 // #A5FF00 +#define COLOR_BLACK2 0x2124 // #212421 + +#define COLOR_BACKGROUND COLOR_BLACK2 +#define COLOR_SELECTION_BG COLOR_ORANGE2 +#define COLOR_COLD COLOR_WHITE +#define COLOR_HOTEND COLOR_RED2 +#define COLOR_HEATED_BED COLOR_RED2 +#define COLOR_CHAMBER COLOR_WHITE +#define COLOR_FAN COLOR_WHITE +#define COLOR_AXIS_FRAME COLOR_WHITE +#define COLOR_AXIS_HOMED COLOR_ORANGE2 +#define COLOR_AXIS_NOT_HOMED COLOR_ORANGE2 +#define COLOR_RATE_100 COLOR_LIME2 +#define COLOR_RATE_ALTERED COLOR_ORANGE2 +#define COLOR_PRINT_TIME COLOR_WHITE +#define COLOR_PROGRESS_BAR COLOR_ORANGE2 +#define COLOR_STATUS_MESSAGE COLOR_ORANGE2 +#define COLOR_SD_ENABLED COLOR_CONTROL_ENABLED +#define COLOR_SD_DISABLED COLOR_CONTROL_DISABLED +#define COLOR_MENU_TEXT COLOR_WHITE +#define COLOR_MENU_VALUE_FONT COLOR_ORANGE2 +#define COLOR_SLIDER COLOR_ORANGE2 +#define COLOR_INCREASE COLOR_WHITE +#define COLOR_DECREASE COLOR_WHITE +#define COLOR_TICK COLOR_VIVID_GREEN /** * TFT Rotation. Set to one of the following values: @@ -2573,7 +2609,7 @@ // // Touch Screen Settings // -//#define TOUCH_SCREEN +#define TOUCH_SCREEN #if ENABLED(TOUCH_SCREEN) #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus @@ -2591,7 +2627,7 @@ #endif #if ENABLED(TFT_COLOR_UI) - //#define SINGLE_TOUCH_NAVIGATION + #define SINGLE_TOUCH_NAVIGATION #endif #endif @@ -2618,7 +2654,7 @@ // Use software PWM to drive the fan, as for the heaters. This uses a very low frequency // which is not as annoying as with the hardware PWM. On the other hand, if this frequency // is too low, you should also increment SOFT_PWM_SCALE. -//#define FAN_SOFT_PWM +#define FAN_SOFT_PWM // Incrementing this by 1 will double the software PWM frequency, // affecting heaters, and the fan if FAN_SOFT_PWM is enabled. diff --git a/config/examples/Anet/ET5/Configuration_adv.h b/config/examples/Anet/ET5/Configuration_adv.h index 5335fa012a..2e029ebed7 100644 --- a/config/examples/Anet/ET5/Configuration_adv.h +++ b/config/examples/Anet/ET5/Configuration_adv.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Anet/ET5" + /** * Configuration_adv.h * @@ -258,7 +260,7 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 20 // Seconds + #define WATCH_TEMP_PERIOD 40 // Seconds #define WATCH_TEMP_INCREASE 2 // Degrees Celsius #endif @@ -266,13 +268,13 @@ * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_BED_PERIOD 180 // Seconds #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds + #define WATCH_BED_TEMP_PERIOD 180 // Seconds #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius #endif @@ -437,9 +439,9 @@ * Hotend Idle Timeout * Prevent filament in the nozzle from charring and causing a critical jam. */ -//#define HOTEND_IDLE_TIMEOUT +#define HOTEND_IDLE_TIMEOUT #if ENABLED(HOTEND_IDLE_TIMEOUT) - #define HOTEND_IDLE_TIMEOUT_SEC (5*60) // (seconds) Time without extruder movement to trigger protection + #define HOTEND_IDLE_TIMEOUT_SEC (10*60) // (seconds) Time without extruder movement to trigger protection #define HOTEND_IDLE_MIN_TRIGGER 180 // (°C) Minimum temperature to enable hotend protection #define HOTEND_IDLE_NOZZLE_TARGET 0 // (°C) Safe temperature for the nozzle after timeout #define HOTEND_IDLE_BED_TARGET 0 // (°C) Safe temperature for the bed after timeout @@ -540,7 +542,7 @@ * Multiple extruders can be assigned to the same pin in which case * the fan will turn on when any selected extruder is above the threshold. */ -#define E0_AUTO_FAN_PIN -1 +//#define E0_AUTO_FAN_PIN -1 #define E1_AUTO_FAN_PIN -1 #define E2_AUTO_FAN_PIN -1 #define E3_AUTO_FAN_PIN -1 @@ -741,7 +743,7 @@ //#define HOMING_BACKOFF_POST_MM { 2, 2, 2 } // (mm) Backoff from endstops after homing -//#define QUICK_HOME // If G28 contains XY do a diagonal move first +#define QUICK_HOME // If G28 contains XY do a diagonal move first //#define HOME_Y_BEFORE_X // If G28 contains XY home Y before X //#define HOME_Z_FIRST // Home Z first. Requires a Z-MIN endstop (not a probe). //#define CODEPENDENT_XY_HOMING // If X/Y can't home without homing Y/X first @@ -878,11 +880,11 @@ // // Add the G35 command to read bed corners to help adjust screws. Requires a bed probe. // -//#define ASSISTED_TRAMMING +#define ASSISTED_TRAMMING #if ENABLED(ASSISTED_TRAMMING) // Define positions for probe points. - #define TRAMMING_POINT_XY { { 20, 20 }, { 180, 20 }, { 180, 180 }, { 20, 180 } } + #define TRAMMING_POINT_XY { { 20, 45 }, { 280, 45 }, { 280, 255 }, { 20, 255 } } // Define position names for probe points. #define TRAMMING_POINT_NAME_1 "Front-Left" @@ -893,7 +895,7 @@ #define RESTORE_LEVELING_AFTER_G35 // Enable to restore leveling setup after operation //#define REPORT_TRAMMING_MM // Report Z deviation (mm) for each point relative to the first - //#define ASSISTED_TRAMMING_WIZARD // Add a Tramming Wizard to the LCD menu + #define ASSISTED_TRAMMING_WIZARD // Add a Tramming Wizard to the LCD menu //#define ASSISTED_TRAMMING_WAIT_POSITION { X_CENTER, Y_CENTER, 30 } // Move the nozzle out of the way for adjustment @@ -903,7 +905,7 @@ * M4: 40 = Clockwise, 41 = Counter-Clockwise * M5: 50 = Clockwise, 51 = Counter-Clockwise */ - #define TRAMMING_SCREW_THREAD 30 + #define TRAMMING_SCREW_THREAD 40 #endif @@ -1160,14 +1162,14 @@ // Add Probe Z Offset calibration to the Z Probe Offsets menu #if HAS_BED_PROBE - //#define PROBE_OFFSET_WIZARD + #define PROBE_OFFSET_WIZARD #if ENABLED(PROBE_OFFSET_WIZARD) // // Enable to init the Probe Z-Offset when starting the Wizard. // Use a height slightly above the estimated nozzle-to-probe Z offset. // For example, with an offset of -5, consider a starting height of -4. // - //#define PROBE_OFFSET_WIZARD_START_Z -4.0 + #define PROBE_OFFSET_WIZARD_START_Z -4.0 // Set a convenient position to do the calibration (probing point and nozzle/bed-distance) //#define PROBE_OFFSET_WIZARD_XY_POS { X_CENTER, Y_CENTER } @@ -1175,7 +1177,7 @@ #endif // Include a page of printer information in the LCD Main Menu - //#define LCD_INFO_MENU + #define LCD_INFO_MENU #if ENABLED(LCD_INFO_MENU) //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages #endif @@ -1229,7 +1231,7 @@ #endif // Scroll a longer status message into view - //#define STATUS_MESSAGE_SCROLLING + #define STATUS_MESSAGE_SCROLLING // On the Info Screen, display XY with one decimal place when possible //#define LCD_DECIMAL_SMALL_XY @@ -1238,7 +1240,7 @@ //#define LCD_SET_PROGRESS_MANUALLY // Show the E position (filament used) during printing - //#define LCD_SHOW_E_TOTAL + #define LCD_SHOW_E_TOTAL #endif #if EITHER(SDSUPPORT, LCD_SET_PROGRESS_MANUALLY) && ANY(HAS_MARLINUI_U8GLIB, HAS_MARLINUI_HD44780, IS_TFTGLCD_PANEL, EXTENSIBLE_UI) @@ -1315,13 +1317,13 @@ * an option on the LCD screen to continue the print from the last-known * point in the file. */ - //#define POWER_LOSS_RECOVERY + #define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) //#define BACKUP_POWER_SUPPLY // Backup power / UPS to move the steppers on power loss //#define POWER_LOSS_ZRAISE 2 // (mm) Z axis raise on resume (on power loss with UPS) //#define POWER_LOSS_PIN 44 // Pin to detect power loss. Set to -1 to disable default pin on boards without module. - //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss + #define POWER_LOSS_STATE LOW // State of pin indicating power loss //#define POWER_LOSS_PULLUP // Set pullup / pulldown as appropriate for your sensor //#define POWER_LOSS_PULLDOWN //#define POWER_LOSS_PURGE_LEN 20 // (mm) Length of filament to purge on resume @@ -1381,10 +1383,10 @@ //#define UTF_FILENAME_SUPPORT // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT + #define LONG_FILENAME_HOST_SUPPORT // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES + #define SCROLL_LONG_FILENAMES // Leave the heaters on after Stop Print (not recommended!) //#define SD_ABORT_NO_COOLDOWN @@ -1790,9 +1792,9 @@ * * Warning: Does not respect endstops! */ -//#define BABYSTEPPING +#define BABYSTEPPING #if ENABLED(BABYSTEPPING) - //#define INTEGRATED_BABYSTEPPING // EXPERIMENTAL integration of babystepping into the Stepper ISR + #define INTEGRATED_BABYSTEPPING // EXPERIMENTAL integration of babystepping into the Stepper ISR //#define BABYSTEP_WITHOUT_HOMING //#define BABYSTEP_ALWAYS_AVAILABLE // Allow babystepping at all times (not just during movement). //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! @@ -1813,7 +1815,7 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 - //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping + #define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping #if ENABLED(BABYSTEP_ZPROBE_OFFSET) //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor @@ -1837,10 +1839,10 @@ * * See https://marlinfw.org/docs/features/lin_advance.html for full instructions. */ -//#define LIN_ADVANCE +#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) //#define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants - #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed + #define LIN_ADVANCE_K 0.00 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // If enabled, this will generate debug information output over USB. //#define EXPERIMENTAL_SCURVE // Enable this option to permit S-Curve Acceleration #endif @@ -1882,8 +1884,8 @@ #if PROBE_SELECTED && !IS_KINEMATIC //#define PROBING_MARGIN_LEFT PROBING_MARGIN //#define PROBING_MARGIN_RIGHT PROBING_MARGIN - //#define PROBING_MARGIN_FRONT PROBING_MARGIN - //#define PROBING_MARGIN_BACK PROBING_MARGIN + #define PROBING_MARGIN_FRONT 20 + #define PROBING_MARGIN_BACK 20 #endif #if EITHER(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL) @@ -2141,7 +2143,7 @@ * Currently handles M108, M112, M410, M876 * NOTE: Not yet implemented for all platforms. */ -//#define EMERGENCY_PARSER +#define EMERGENCY_PARSER /** * Realtime Reporting (requires EMERGENCY_PARSER) @@ -2311,28 +2313,28 @@ * * Enable PARK_HEAD_ON_PAUSE to add the G-code M125 Pause and Park. */ -//#define ADVANCED_PAUSE_FEATURE +#define ADVANCED_PAUSE_FEATURE #if ENABLED(ADVANCED_PAUSE_FEATURE) #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. // This short retract is done immediately, before parking the nozzle. - #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast. + #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 45 // (mm/s) Unload filament feedrate. This can be pretty fast. #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload. + #define FILAMENT_CHANGE_UNLOAD_LENGTH 480 // (mm) The length of filament for a complete unload. // For Bowden, the full length of the tube and nozzle. // For direct drive, the full length of the nozzle. // Set to 0 for manual unloading. #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE 6 // (mm/s) Slow move when starting load. - #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 0 // (mm) Slow length, to allow time to insert material. + #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 25 // (mm) Slow length, to allow time to insert material. // 0 to disable start loading and skip to fast load only - #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast. + #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 45 // (mm/s) Load filament feedrate. This can be pretty fast. #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle. + #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 370 // (mm) Load length of filament, from extruder gear to nozzle. // For Bowden, the full length of the tube and nozzle. // For direct drive, the full length of the nozzle. //#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted. - #define ADVANCED_PAUSE_PURGE_FEEDRATE 3 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate. - #define ADVANCED_PAUSE_PURGE_LENGTH 50 // (mm) Length to extrude after loading. + #define ADVANCED_PAUSE_PURGE_FEEDRATE 5 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate. + #define ADVANCED_PAUSE_PURGE_LENGTH 60 // (mm) Length to extrude after loading. // Set to 0 for manual extrusion. // Filament can be extruded repeatedly from the Filament Change menu // until extrusion is consistent, and to purge old filament. @@ -2345,14 +2347,14 @@ #define FILAMENT_UNLOAD_PURGE_LENGTH 8 // (mm) An unretract is done, then this length is purged. #define FILAMENT_UNLOAD_PURGE_FEEDRATE 25 // (mm/s) feedrate to purge before unload - #define PAUSE_PARK_NOZZLE_TIMEOUT 45 // (seconds) Time limit before the nozzle is turned off for safety. + #define PAUSE_PARK_NOZZLE_TIMEOUT 120 // (seconds) Time limit before the nozzle is turned off for safety. #define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed. #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change. //#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. - //#define HOME_BEFORE_FILAMENT_CHANGE // If needed, home before parking for filament change + #define HOME_BEFORE_FILAMENT_CHANGE // If needed, home before parking for filament change - //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. + #define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) #endif @@ -2719,7 +2721,7 @@ * Define your own with: * { , , hysteresis_start[1..8] } */ - #define CHOPPER_TIMING CHOPPER_DEFAULT_12V // All axes (override below) + #define CHOPPER_TIMING CHOPPER_DEFAULT_24V // All axes (override below) //#define CHOPPER_TIMING_X CHOPPER_TIMING // For X Axes (override below) //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X //#define CHOPPER_TIMING_Y CHOPPER_TIMING // For Y Axes (override below) @@ -3526,7 +3528,7 @@ * * Execute certain G-code commands immediately after power-on. */ -//#define STARTUP_COMMANDS "M17 Z" +#define STARTUP_COMMANDS "M17 Z" /** * G-code Macros @@ -3650,9 +3652,9 @@ * Host Prompt Support enables Marlin to use the host for user prompts so * filament runout and other processes can be managed from the host side. */ -//#define HOST_ACTION_COMMANDS +#define HOST_ACTION_COMMANDS #if ENABLED(HOST_ACTION_COMMANDS) - //#define HOST_PROMPT_SUPPORT + #define HOST_PROMPT_SUPPORT //#define HOST_START_MENU_ITEM // Add a menu item that tells the host to start #endif @@ -3661,10 +3663,7 @@ * * Implement M486 to allow Marlin to skip objects */ -//#define CANCEL_OBJECTS -#if ENABLED(CANCEL_OBJECTS) - #define CANCEL_OBJECTS_REPORTING // Emit the current object as a status message -#endif +#define CANCEL_OBJECTS /** * I2C position encoders for closed loop control. diff --git a/config/examples/Anet/ET5X/Configuration.h b/config/examples/Anet/ET5X/Configuration.h index 78c2dc9160..235597e0cc 100644 --- a/config/examples/Anet/ET5X/Configuration.h +++ b/config/examples/Anet/ET5X/Configuration.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Anet/ET5X" + /** * Configuration.h * @@ -69,7 +71,7 @@ // @section info // Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes. +#define STRING_CONFIG_H_AUTHOR "(thisiskeithb, ET5X)" // Who made the changes. //#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) /** @@ -102,7 +104,7 @@ * * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] */ -#define SERIAL_PORT 0 +#define SERIAL_PORT 1 /** * Select a secondary serial port on the board to use for communication with the host. @@ -127,18 +129,18 @@ * * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ -#define BAUDRATE 250000 +#define BAUDRATE 115200 // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH // Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_RAMPS_14_EFB + #define MOTHERBOARD BOARD_ANET_ET4 #endif // Name displayed in the LCD "Ready" message and Info menu -//#define CUSTOM_MACHINE_NAME "3D Printer" +#define CUSTOM_MACHINE_NAME "Anet ET5X" // Printer's unique ID, used by some programs to differentiate between machines. // Choose your own or use a service like https://www.uuidgenerator.net/version4 @@ -424,7 +426,7 @@ #define TEMP_SENSOR_5 0 #define TEMP_SENSOR_6 0 #define TEMP_SENSOR_7 0 -#define TEMP_SENSOR_BED 0 +#define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 #define TEMP_SENSOR_COOLER 0 @@ -445,12 +447,12 @@ #define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10 #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 -#define TEMP_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target +#define TEMP_WINDOW 3 // (°C) Temperature proximity for the "temperature reached" timer +#define TEMP_HYSTERESIS 5 // (°C) Temperature proximity considered "close enough" to the target #define TEMP_BED_RESIDENCY_TIME 10 // (seconds) Time to wait for bed to "settle" in M190 -#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target +#define TEMP_BED_WINDOW 3 // (°C) Temperature proximity for the "temperature reached" timer +#define TEMP_BED_HYSTERESIS 5 // (°C) Temperature proximity considered "close enough" to the target #define TEMP_CHAMBER_RESIDENCY_TIME 10 // (seconds) Time to wait for chamber to "settle" in M191 #define TEMP_CHAMBER_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer @@ -472,7 +474,7 @@ // Above this temperature the heater will be switched off. // This can protect components from overheating, but NOT from shorts and failures. // (Use MINTEMP for thermistor short/failure protection.) -#define HEATER_0_MAXTEMP 275 +#define HEATER_0_MAXTEMP 265 // 250 + 15 #define HEATER_1_MAXTEMP 275 #define HEATER_2_MAXTEMP 275 #define HEATER_3_MAXTEMP 275 @@ -480,7 +482,7 @@ #define HEATER_5_MAXTEMP 275 #define HEATER_6_MAXTEMP 275 #define HEATER_7_MAXTEMP 275 -#define BED_MAXTEMP 150 +#define BED_MAXTEMP 110 // 100 + 10 #define CHAMBER_MAXTEMP 60 /** @@ -505,8 +507,8 @@ #define PID_K1 0.95 // Smoothing factor within any PID loop #if ENABLED(PIDTEMP) - //#define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) - //#define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) + #define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) + #define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) // Set/get with gcode: M301 E[extruder number, 0-2] @@ -517,9 +519,9 @@ #define DEFAULT_Ki_LIST { 1.08, 1.08 } #define DEFAULT_Kd_LIST { 114.00, 114.00 } #else - #define DEFAULT_Kp 22.20 - #define DEFAULT_Ki 1.08 - #define DEFAULT_Kd 114.00 + #define DEFAULT_Kp 24.04 + #define DEFAULT_Ki 2.03 + #define DEFAULT_Kd 71.17 #endif #endif // PIDTEMP @@ -540,7 +542,7 @@ * heater. If your configuration is significantly different than this and you don't understand * the issues involved, don't use bed PID until someone else verifies that your hardware works. */ -//#define PIDTEMPBED +#define PIDTEMPBED //#define BED_LIMIT_SWITCHING @@ -558,9 +560,9 @@ // 120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) // from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) - #define DEFAULT_bedKp 10.00 - #define DEFAULT_bedKi .023 - #define DEFAULT_bedKd 305.4 + #define DEFAULT_bedKp 76.11 + #define DEFAULT_bedKi 12.86 + #define DEFAULT_bedKd 300.40 // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. #endif // PIDTEMPBED @@ -634,7 +636,7 @@ * Note: For Bowden Extruders make this large enough to allow load/unload. */ #define PREVENT_LENGTHY_EXTRUDE -#define EXTRUDE_MAXLENGTH 200 +#define EXTRUDE_MAXLENGTH 500 //=========================================================================== //======================== Thermal Runaway Protection ======================= @@ -717,13 +719,13 @@ #endif // Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. +#define X_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Y_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Z_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. #define X_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. #define Y_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. #define Z_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_PROBE_ENDSTOP_INVERTING false // Set to true to invert the logic of the probe. +#define Z_MIN_PROBE_ENDSTOP_INVERTING true // Set to true to invert the logic of the probe. /** * Stepper Drivers @@ -806,14 +808,14 @@ * Override with M92 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 500 } +#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 100 } /** * Default Max Feed Rate (mm/s) * Override with M203 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 } +#define DEFAULT_MAX_FEEDRATE { 300, 300, 10, 25 } //#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 #if ENABLED(LIMITED_MAX_FR_EDITING) @@ -877,7 +879,7 @@ * https://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html */ #if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.013 // (mm) Distance from real junction edge + #define JUNCTION_DEVIATION_MM 0.016 // (mm) Distance from real junction edge #define JD_HANDLE_SMALL_SEGMENTS // Use curvature estimation instead of just the junction angle // for small segments (< 1mm) with large junction angles (> 135°). #endif @@ -906,10 +908,10 @@ * The probe replaces the Z-MIN endstop and is used for Z homing. * (Automatically enables USE_PROBE_FOR_Z_HOMING.) */ -#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN +//#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN // Force the use of the probe for Z-axis homing -//#define USE_PROBE_FOR_Z_HOMING +#define USE_PROBE_FOR_Z_HOMING /** * Z_MIN_PROBE_PIN @@ -946,7 +948,7 @@ * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. * (e.g., an inductive probe or a nozzle-based probe-switch.) */ -//#define FIX_MOUNTED_PROBE +#define FIX_MOUNTED_PROBE /** * Use the nozzle as the probe, as with a conductive @@ -1055,7 +1057,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +#define NOZZLE_TO_PROBE_OFFSET { -25, -8.5, 0 } // Most probes should stay away from the edges of the bed, but // with NOZZLE_AS_PROBE this can be negative for a wider probing area. @@ -1065,7 +1067,7 @@ #define XY_PROBE_FEEDRATE (133*60) // Feedrate (mm/min) for the first approach when double-probing (MULTIPLE_PROBING == 2) -#define Z_PROBE_FEEDRATE_FAST (4*60) +#define Z_PROBE_FEEDRATE_FAST (10*60) // Feedrate (mm/min) for the "accurate" probe of each point #define Z_PROBE_FEEDRATE_SLOW (Z_PROBE_FEEDRATE_FAST / 2) @@ -1106,7 +1108,7 @@ * A total of 2 does fast/slow probes with a weighted average. * A total of 3 or more adds more slow probes, taking the average. */ -//#define MULTIPLE_PROBING 2 +#define MULTIPLE_PROBING 2 //#define EXTRA_PROBING 1 /** @@ -1123,7 +1125,7 @@ * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. */ -#define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow +#define Z_CLEARANCE_DEPLOY_PROBE 0 // Z Clearance for Deploy/Stow #define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points #define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes //#define Z_AFTER_PROBING 5 // Z position after probing is done @@ -1135,7 +1137,7 @@ #define Z_PROBE_OFFSET_RANGE_MAX 20 // Enable the M48 repeatability test to test probe accuracy -//#define Z_MIN_PROBE_REPEATABILITY_TEST +#define Z_MIN_PROBE_REPEATABILITY_TEST // Before deploy/stow pause for user confirmation //#define PAUSE_BEFORE_DEPLOY_STOW @@ -1150,7 +1152,7 @@ * These options are most useful for the BLTouch probe, but may also improve * readings with inductive probes and piezo sensors. */ -//#define PROBING_HEATERS_OFF // Turn heaters off when probing +#define PROBING_HEATERS_OFF // Turn heaters off when probing #if ENABLED(PROBING_HEATERS_OFF) //#define WAIT_FOR_BED_HEATER // Wait for bed to heat back up between probes (to improve accuracy) //#define WAIT_FOR_HOTEND // Wait for hotend to heat back up between probes (to improve accuracy & prevent cold extrude) @@ -1190,9 +1192,9 @@ // @section machine // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR false -#define INVERT_Y_DIR true -#define INVERT_Z_DIR false +#define INVERT_X_DIR true +#define INVERT_Y_DIR false +#define INVERT_Z_DIR true // @section extruder @@ -1232,16 +1234,16 @@ // @section machine // The size of the printable area -#define X_BED_SIZE 200 -#define Y_BED_SIZE 200 +#define X_BED_SIZE 300 +#define Y_BED_SIZE 300 // Travel limits (mm) after homing, corresponding to endstop positions. #define X_MIN_POS 0 -#define Y_MIN_POS 0 +#define Y_MIN_POS -18 #define Z_MIN_POS 0 -#define X_MAX_POS X_BED_SIZE -#define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 200 +#define X_MAX_POS X_BED_SIZE + 35 +#define Y_MAX_POS Y_BED_SIZE + 15 +#define Z_MAX_POS 400 /** * Software Endstops @@ -1269,7 +1271,7 @@ #endif #if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS) - //#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD + #define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD #endif /** @@ -1285,7 +1287,7 @@ * RAMPS-based boards use SERVO3_PIN for the first runout sensor. * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. */ -//#define FILAMENT_RUNOUT_SENSOR +#define FILAMENT_RUNOUT_SENSOR #if ENABLED(FILAMENT_RUNOUT_SENSOR) #define FIL_RUNOUT_ENABLED_DEFAULT true // Enable the sensor on startup. Override with M412 followed by M500. #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. @@ -1387,7 +1389,7 @@ */ //#define AUTO_BED_LEVELING_3POINT //#define AUTO_BED_LEVELING_LINEAR -//#define AUTO_BED_LEVELING_BILINEAR +#define AUTO_BED_LEVELING_BILINEAR //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING @@ -1397,7 +1399,7 @@ * leveling immediately after G28. */ //#define RESTORE_LEVELING_AFTER_G28 -//#define ENABLE_LEVELING_AFTER_G28 +#define ENABLE_LEVELING_AFTER_G28 /** * Auto-leveling needs preheating @@ -1454,7 +1456,7 @@ #if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR) // Set the number of grid points per dimension. - #define GRID_MAX_POINTS_X 3 + #define GRID_MAX_POINTS_X 7 #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X // Probe along the Y axis, advancing X after each column @@ -1464,7 +1466,7 @@ // Beyond the probed grid, continue the implied tilt? // Default is to maintain the height of the nearest edge. - //#define EXTRAPOLATE_BEYOND_GRID + #define EXTRAPOLATE_BEYOND_GRID // // Experimental Subdivision of the grid by Catmull-Rom method. @@ -1518,16 +1520,16 @@ * Add a bed leveling sub-menu for ABL or MBL. * Include a guided procedure if manual probing is enabled. */ -//#define LCD_BED_LEVELING +#define LCD_BED_LEVELING #if ENABLED(LCD_BED_LEVELING) #define MESH_EDIT_Z_STEP 0.025 // (mm) Step size while manually probing Z axis. #define LCD_PROBE_Z_RANGE 4 // (mm) Z Range centered on Z_MIN_POS for LCD Z adjustment - //#define MESH_EDIT_MENU // Add a menu to edit mesh points + #define MESH_EDIT_MENU // Add a menu to edit mesh points #endif // Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS +#define LEVEL_BED_CORNERS #if ENABLED(LEVEL_BED_CORNERS) #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets @@ -1587,7 +1589,7 @@ // - Move the Z probe (or nozzle) to a defined XY point before Z Homing. // - Prevent Z homing when the Z probe is outside bed area. // -//#define Z_SAFE_HOMING +#define Z_SAFE_HOMING #if ENABLED(Z_SAFE_HOMING) #define Z_SAFE_HOMING_X_POINT X_CENTER // X point for Z homing @@ -1595,7 +1597,8 @@ #endif // Homing speeds (mm/min) -#define HOMING_FEEDRATE_MM_M { (50*60), (50*60), (4*60) } +#define HOMING_FEEDRATE_Z (6*60) +#define HOMING_FEEDRATE_MM_M { (40*60), (40*60), HOMING_FEEDRATE_Z } // Validate that endstops are triggered on homing moves #define VALIDATE_HOMING_ENDSTOPS @@ -1672,12 +1675,12 @@ * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) */ -//#define EEPROM_SETTINGS // Persistent storage with M500 and M501 +#define EEPROM_SETTINGS // Persistent storage with M500 and M501 //#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. #define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load #if ENABLED(EEPROM_SETTINGS) - //#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. + #define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. #endif // @@ -1706,17 +1709,23 @@ // Preheat Constants - Up to 5 are supported without changes // #define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 180 -#define PREHEAT_1_TEMP_BED 70 +#define PREHEAT_1_TEMP_HOTEND 210 +#define PREHEAT_1_TEMP_BED 60 #define PREHEAT_1_TEMP_CHAMBER 35 #define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 -#define PREHEAT_2_LABEL "ABS" -#define PREHEAT_2_TEMP_HOTEND 240 -#define PREHEAT_2_TEMP_BED 110 +#define PREHEAT_2_LABEL "PETG" +#define PREHEAT_2_TEMP_HOTEND 235 +#define PREHEAT_2_TEMP_BED 70 #define PREHEAT_2_TEMP_CHAMBER 35 #define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 +#define PREHEAT_3_LABEL "ABS" +#define PREHEAT_3_TEMP_HOTEND 240 +#define PREHEAT_3_TEMP_BED 100 +#define PREHEAT_3_TEMP_CHAMBER 35 +#define PREHEAT_3_FAN_SPEED 0 // Value from 0 to 255 + /** * Nozzle Park * @@ -1728,11 +1737,11 @@ * P1 Raise the nozzle always to Z-park height. * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. */ -//#define NOZZLE_PARK_FEATURE +#define NOZZLE_PARK_FEATURE #if ENABLED(NOZZLE_PARK_FEATURE) // Specify a park position as { X, Y, Z_raise } - #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 } + #define NOZZLE_PARK_POINT { (X_MAX_POS - 10), (Y_MIN_POS + 10), 20 } //#define NOZZLE_PARK_X_ONLY // X move only is required to park //#define NOZZLE_PARK_Y_ONLY // Y move only is required to park #define NOZZLE_PARK_Z_RAISE_MIN 2 // (mm) Always raise Z by at least this distance @@ -1936,14 +1945,14 @@ * SD Card support is disabled by default. If your controller has an SD slot, * you must uncomment the following option or it won't work. */ -//#define SDSUPPORT +#define SDSUPPORT /** * SD CARD: ENABLE CRC * * Use CRC checks and retries on the SD communication. */ -//#define SD_CHECK_AND_RETRY +#define SD_CHECK_AND_RETRY /** * LCD Menu Items @@ -2006,7 +2015,7 @@ // // Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. // -//#define INDIVIDUAL_AXIS_HOMING_MENU +#define INDIVIDUAL_AXIS_HOMING_MENU // // SPEAKER/BUZZER @@ -2508,7 +2517,7 @@ // // 480x320, 3.5", FSMC Stock Display from ET5 // -//#define ANET_ET5_TFT35 +#define ANET_ET5_TFT35 // // 1024x600, 7", RGB Stock Display from BIQU-BX @@ -2544,12 +2553,39 @@ * root of your SD card, together with the compiled firmware. */ //#define TFT_CLASSIC_UI -//#define TFT_COLOR_UI +#define TFT_COLOR_UI //#define TFT_LVGL_UI -#if ENABLED(TFT_LVGL_UI) - //#define MKS_WIFI_MODULE // MKS WiFi module -#endif +/* ET4/ET5 Black Theme */ + +#define COLOR_RED2 0xF003 // #F70019 +#define COLOR_ORANGE2 0xFDE0 // #FFBE00 +#define COLOR_LIME2 0xA7E0 // #A5FF00 +#define COLOR_BLACK2 0x2124 // #212421 + +#define COLOR_BACKGROUND COLOR_BLACK2 +#define COLOR_SELECTION_BG COLOR_ORANGE2 +#define COLOR_COLD COLOR_WHITE +#define COLOR_HOTEND COLOR_RED2 +#define COLOR_HEATED_BED COLOR_RED2 +#define COLOR_CHAMBER COLOR_WHITE +#define COLOR_FAN COLOR_WHITE +#define COLOR_AXIS_FRAME COLOR_WHITE +#define COLOR_AXIS_HOMED COLOR_ORANGE2 +#define COLOR_AXIS_NOT_HOMED COLOR_ORANGE2 +#define COLOR_RATE_100 COLOR_LIME2 +#define COLOR_RATE_ALTERED COLOR_ORANGE2 +#define COLOR_PRINT_TIME COLOR_WHITE +#define COLOR_PROGRESS_BAR COLOR_ORANGE2 +#define COLOR_STATUS_MESSAGE COLOR_ORANGE2 +#define COLOR_SD_ENABLED COLOR_CONTROL_ENABLED +#define COLOR_SD_DISABLED COLOR_CONTROL_DISABLED +#define COLOR_MENU_TEXT COLOR_WHITE +#define COLOR_MENU_VALUE_FONT COLOR_ORANGE2 +#define COLOR_SLIDER COLOR_ORANGE2 +#define COLOR_INCREASE COLOR_WHITE +#define COLOR_DECREASE COLOR_WHITE +#define COLOR_TICK COLOR_VIVID_GREEN /** * TFT Rotation. Set to one of the following values: @@ -2573,7 +2609,7 @@ // // Touch Screen Settings // -//#define TOUCH_SCREEN +#define TOUCH_SCREEN #if ENABLED(TOUCH_SCREEN) #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus @@ -2591,7 +2627,7 @@ #endif #if ENABLED(TFT_COLOR_UI) - //#define SINGLE_TOUCH_NAVIGATION + #define SINGLE_TOUCH_NAVIGATION #endif #endif @@ -2618,7 +2654,7 @@ // Use software PWM to drive the fan, as for the heaters. This uses a very low frequency // which is not as annoying as with the hardware PWM. On the other hand, if this frequency // is too low, you should also increment SOFT_PWM_SCALE. -//#define FAN_SOFT_PWM +#define FAN_SOFT_PWM // Incrementing this by 1 will double the software PWM frequency, // affecting heaters, and the fan if FAN_SOFT_PWM is enabled. diff --git a/config/examples/Anet/ET5X/Configuration_adv.h b/config/examples/Anet/ET5X/Configuration_adv.h index 5335fa012a..0a55ce209f 100644 --- a/config/examples/Anet/ET5X/Configuration_adv.h +++ b/config/examples/Anet/ET5X/Configuration_adv.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Anet/ET5X" + /** * Configuration_adv.h * @@ -258,7 +260,7 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 20 // Seconds + #define WATCH_TEMP_PERIOD 40 // Seconds #define WATCH_TEMP_INCREASE 2 // Degrees Celsius #endif @@ -266,13 +268,13 @@ * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_BED_PERIOD 180 // Seconds #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds + #define WATCH_BED_TEMP_PERIOD 180 // Seconds #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius #endif @@ -437,9 +439,9 @@ * Hotend Idle Timeout * Prevent filament in the nozzle from charring and causing a critical jam. */ -//#define HOTEND_IDLE_TIMEOUT +#define HOTEND_IDLE_TIMEOUT #if ENABLED(HOTEND_IDLE_TIMEOUT) - #define HOTEND_IDLE_TIMEOUT_SEC (5*60) // (seconds) Time without extruder movement to trigger protection + #define HOTEND_IDLE_TIMEOUT_SEC (10*60) // (seconds) Time without extruder movement to trigger protection #define HOTEND_IDLE_MIN_TRIGGER 180 // (°C) Minimum temperature to enable hotend protection #define HOTEND_IDLE_NOZZLE_TARGET 0 // (°C) Safe temperature for the nozzle after timeout #define HOTEND_IDLE_BED_TARGET 0 // (°C) Safe temperature for the bed after timeout @@ -540,7 +542,7 @@ * Multiple extruders can be assigned to the same pin in which case * the fan will turn on when any selected extruder is above the threshold. */ -#define E0_AUTO_FAN_PIN -1 +//#define E0_AUTO_FAN_PIN -1 #define E1_AUTO_FAN_PIN -1 #define E2_AUTO_FAN_PIN -1 #define E3_AUTO_FAN_PIN -1 @@ -741,7 +743,7 @@ //#define HOMING_BACKOFF_POST_MM { 2, 2, 2 } // (mm) Backoff from endstops after homing -//#define QUICK_HOME // If G28 contains XY do a diagonal move first +#define QUICK_HOME // If G28 contains XY do a diagonal move first //#define HOME_Y_BEFORE_X // If G28 contains XY home Y before X //#define HOME_Z_FIRST // Home Z first. Requires a Z-MIN endstop (not a probe). //#define CODEPENDENT_XY_HOMING // If X/Y can't home without homing Y/X first @@ -878,11 +880,11 @@ // // Add the G35 command to read bed corners to help adjust screws. Requires a bed probe. // -//#define ASSISTED_TRAMMING +#define ASSISTED_TRAMMING #if ENABLED(ASSISTED_TRAMMING) // Define positions for probe points. - #define TRAMMING_POINT_XY { { 20, 20 }, { 180, 20 }, { 180, 180 }, { 20, 180 } } + #define TRAMMING_POINT_XY { { 20, 45 }, { 280, 45 }, { 280, 255 }, { 20, 255 } } // Define position names for probe points. #define TRAMMING_POINT_NAME_1 "Front-Left" @@ -893,7 +895,7 @@ #define RESTORE_LEVELING_AFTER_G35 // Enable to restore leveling setup after operation //#define REPORT_TRAMMING_MM // Report Z deviation (mm) for each point relative to the first - //#define ASSISTED_TRAMMING_WIZARD // Add a Tramming Wizard to the LCD menu + #define ASSISTED_TRAMMING_WIZARD // Add a Tramming Wizard to the LCD menu //#define ASSISTED_TRAMMING_WAIT_POSITION { X_CENTER, Y_CENTER, 30 } // Move the nozzle out of the way for adjustment @@ -903,7 +905,7 @@ * M4: 40 = Clockwise, 41 = Counter-Clockwise * M5: 50 = Clockwise, 51 = Counter-Clockwise */ - #define TRAMMING_SCREW_THREAD 30 + #define TRAMMING_SCREW_THREAD 40 #endif @@ -1160,14 +1162,14 @@ // Add Probe Z Offset calibration to the Z Probe Offsets menu #if HAS_BED_PROBE - //#define PROBE_OFFSET_WIZARD + #define PROBE_OFFSET_WIZARD #if ENABLED(PROBE_OFFSET_WIZARD) // // Enable to init the Probe Z-Offset when starting the Wizard. // Use a height slightly above the estimated nozzle-to-probe Z offset. // For example, with an offset of -5, consider a starting height of -4. // - //#define PROBE_OFFSET_WIZARD_START_Z -4.0 + #define PROBE_OFFSET_WIZARD_START_Z -4.0 // Set a convenient position to do the calibration (probing point and nozzle/bed-distance) //#define PROBE_OFFSET_WIZARD_XY_POS { X_CENTER, Y_CENTER } @@ -1175,7 +1177,7 @@ #endif // Include a page of printer information in the LCD Main Menu - //#define LCD_INFO_MENU + #define LCD_INFO_MENU #if ENABLED(LCD_INFO_MENU) //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages #endif @@ -1229,7 +1231,7 @@ #endif // Scroll a longer status message into view - //#define STATUS_MESSAGE_SCROLLING + #define STATUS_MESSAGE_SCROLLING // On the Info Screen, display XY with one decimal place when possible //#define LCD_DECIMAL_SMALL_XY @@ -1238,7 +1240,7 @@ //#define LCD_SET_PROGRESS_MANUALLY // Show the E position (filament used) during printing - //#define LCD_SHOW_E_TOTAL + #define LCD_SHOW_E_TOTAL #endif #if EITHER(SDSUPPORT, LCD_SET_PROGRESS_MANUALLY) && ANY(HAS_MARLINUI_U8GLIB, HAS_MARLINUI_HD44780, IS_TFTGLCD_PANEL, EXTENSIBLE_UI) @@ -1315,13 +1317,13 @@ * an option on the LCD screen to continue the print from the last-known * point in the file. */ - //#define POWER_LOSS_RECOVERY + #define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) //#define BACKUP_POWER_SUPPLY // Backup power / UPS to move the steppers on power loss //#define POWER_LOSS_ZRAISE 2 // (mm) Z axis raise on resume (on power loss with UPS) //#define POWER_LOSS_PIN 44 // Pin to detect power loss. Set to -1 to disable default pin on boards without module. - //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss + #define POWER_LOSS_STATE LOW // State of pin indicating power loss //#define POWER_LOSS_PULLUP // Set pullup / pulldown as appropriate for your sensor //#define POWER_LOSS_PULLDOWN //#define POWER_LOSS_PURGE_LEN 20 // (mm) Length of filament to purge on resume @@ -1381,10 +1383,10 @@ //#define UTF_FILENAME_SUPPORT // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT + #define LONG_FILENAME_HOST_SUPPORT // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES + #define SCROLL_LONG_FILENAMES // Leave the heaters on after Stop Print (not recommended!) //#define SD_ABORT_NO_COOLDOWN @@ -1790,9 +1792,9 @@ * * Warning: Does not respect endstops! */ -//#define BABYSTEPPING +#define BABYSTEPPING #if ENABLED(BABYSTEPPING) - //#define INTEGRATED_BABYSTEPPING // EXPERIMENTAL integration of babystepping into the Stepper ISR + #define INTEGRATED_BABYSTEPPING // EXPERIMENTAL integration of babystepping into the Stepper ISR //#define BABYSTEP_WITHOUT_HOMING //#define BABYSTEP_ALWAYS_AVAILABLE // Allow babystepping at all times (not just during movement). //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! @@ -1813,7 +1815,7 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 - //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping + #define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping #if ENABLED(BABYSTEP_ZPROBE_OFFSET) //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor @@ -1837,10 +1839,10 @@ * * See https://marlinfw.org/docs/features/lin_advance.html for full instructions. */ -//#define LIN_ADVANCE +#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) //#define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants - #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed + #define LIN_ADVANCE_K 0.00 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // If enabled, this will generate debug information output over USB. //#define EXPERIMENTAL_SCURVE // Enable this option to permit S-Curve Acceleration #endif @@ -1882,8 +1884,8 @@ #if PROBE_SELECTED && !IS_KINEMATIC //#define PROBING_MARGIN_LEFT PROBING_MARGIN //#define PROBING_MARGIN_RIGHT PROBING_MARGIN - //#define PROBING_MARGIN_FRONT PROBING_MARGIN - //#define PROBING_MARGIN_BACK PROBING_MARGIN + #define PROBING_MARGIN_FRONT 20 + #define PROBING_MARGIN_BACK 20 #endif #if EITHER(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL) @@ -2141,7 +2143,7 @@ * Currently handles M108, M112, M410, M876 * NOTE: Not yet implemented for all platforms. */ -//#define EMERGENCY_PARSER +#define EMERGENCY_PARSER /** * Realtime Reporting (requires EMERGENCY_PARSER) @@ -2311,28 +2313,28 @@ * * Enable PARK_HEAD_ON_PAUSE to add the G-code M125 Pause and Park. */ -//#define ADVANCED_PAUSE_FEATURE +#define ADVANCED_PAUSE_FEATURE #if ENABLED(ADVANCED_PAUSE_FEATURE) #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. // This short retract is done immediately, before parking the nozzle. - #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast. + #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 45 // (mm/s) Unload filament feedrate. This can be pretty fast. #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload. + #define FILAMENT_CHANGE_UNLOAD_LENGTH 480 // (mm) The length of filament for a complete unload. // For Bowden, the full length of the tube and nozzle. // For direct drive, the full length of the nozzle. // Set to 0 for manual unloading. #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE 6 // (mm/s) Slow move when starting load. - #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 0 // (mm) Slow length, to allow time to insert material. + #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 25 // (mm) Slow length, to allow time to insert material. // 0 to disable start loading and skip to fast load only - #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast. + #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 45 // (mm/s) Load filament feedrate. This can be pretty fast. #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle. + #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 370 // (mm) Load length of filament, from extruder gear to nozzle. // For Bowden, the full length of the tube and nozzle. // For direct drive, the full length of the nozzle. //#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted. - #define ADVANCED_PAUSE_PURGE_FEEDRATE 3 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate. - #define ADVANCED_PAUSE_PURGE_LENGTH 50 // (mm) Length to extrude after loading. + #define ADVANCED_PAUSE_PURGE_FEEDRATE 5 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate. + #define ADVANCED_PAUSE_PURGE_LENGTH 60 // (mm) Length to extrude after loading. // Set to 0 for manual extrusion. // Filament can be extruded repeatedly from the Filament Change menu // until extrusion is consistent, and to purge old filament. @@ -2345,14 +2347,14 @@ #define FILAMENT_UNLOAD_PURGE_LENGTH 8 // (mm) An unretract is done, then this length is purged. #define FILAMENT_UNLOAD_PURGE_FEEDRATE 25 // (mm/s) feedrate to purge before unload - #define PAUSE_PARK_NOZZLE_TIMEOUT 45 // (seconds) Time limit before the nozzle is turned off for safety. + #define PAUSE_PARK_NOZZLE_TIMEOUT 120 // (seconds) Time limit before the nozzle is turned off for safety. #define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed. #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change. //#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. - //#define HOME_BEFORE_FILAMENT_CHANGE // If needed, home before parking for filament change + #define HOME_BEFORE_FILAMENT_CHANGE // If needed, home before parking for filament change - //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. + #define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) #endif @@ -2719,7 +2721,7 @@ * Define your own with: * { , , hysteresis_start[1..8] } */ - #define CHOPPER_TIMING CHOPPER_DEFAULT_12V // All axes (override below) + #define CHOPPER_TIMING CHOPPER_DEFAULT_24V // All axes (override below) //#define CHOPPER_TIMING_X CHOPPER_TIMING // For X Axes (override below) //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X //#define CHOPPER_TIMING_Y CHOPPER_TIMING // For Y Axes (override below) @@ -3526,7 +3528,7 @@ * * Execute certain G-code commands immediately after power-on. */ -//#define STARTUP_COMMANDS "M17 Z" +#define STARTUP_COMMANDS "M17 Z" /** * G-code Macros @@ -3650,9 +3652,9 @@ * Host Prompt Support enables Marlin to use the host for user prompts so * filament runout and other processes can be managed from the host side. */ -//#define HOST_ACTION_COMMANDS +#define HOST_ACTION_COMMANDS #if ENABLED(HOST_ACTION_COMMANDS) - //#define HOST_PROMPT_SUPPORT + #define HOST_PROMPT_SUPPORT //#define HOST_START_MENU_ITEM // Add a menu item that tells the host to start #endif @@ -3661,10 +3663,7 @@ * * Implement M486 to allow Marlin to skip objects */ -//#define CANCEL_OBJECTS -#if ENABLED(CANCEL_OBJECTS) - #define CANCEL_OBJECTS_REPORTING // Emit the current object as a status message -#endif +#define CANCEL_OBJECTS /** * I2C position encoders for closed loop control. diff --git a/config/examples/AnyCubic/Chiron/Configuration.h b/config/examples/AnyCubic/Chiron/Configuration.h index 78c2dc9160..6ff095d5a7 100644 --- a/config/examples/AnyCubic/Chiron/Configuration.h +++ b/config/examples/AnyCubic/Chiron/Configuration.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "AnyCubic/Chiron" + /** * Configuration.h * @@ -69,7 +71,7 @@ // @section info // Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes. +#define STRING_CONFIG_H_AUTHOR "(Nick Wells, Chiron Build)" // Who made the changes. //#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) /** @@ -84,7 +86,7 @@ */ // Show the Marlin bootscreen on startup. ** ENABLE FOR PRODUCTION ** -#define SHOW_BOOTSCREEN +//#define SHOW_BOOTSCREEN // Show the bitmap in Marlin/_Bootscreen.h on startup. //#define SHOW_CUSTOM_BOOTSCREEN @@ -134,11 +136,14 @@ // Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_RAMPS_14_EFB + #define MOTHERBOARD BOARD_TRIGORILLA_14 #endif +// Anycubic Chiron custom pin defs for the Trigorilla board fastio_1280.h +#define OUTAGECON_PIN 58 // p93 F4 +#define X_MAX_PIN 43 // Name displayed in the LCD "Ready" message and Info menu -//#define CUSTOM_MACHINE_NAME "3D Printer" +#define CUSTOM_MACHINE_NAME "Anycubic Chiron" // Printer's unique ID, used by some programs to differentiate between machines. // Choose your own or use a service like https://www.uuidgenerator.net/version4 @@ -416,7 +421,7 @@ * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. */ -#define TEMP_SENSOR_0 1 +#define TEMP_SENSOR_0 5 #define TEMP_SENSOR_1 0 #define TEMP_SENSOR_2 0 #define TEMP_SENSOR_3 0 @@ -424,7 +429,7 @@ #define TEMP_SENSOR_5 0 #define TEMP_SENSOR_6 0 #define TEMP_SENSOR_7 0 -#define TEMP_SENSOR_BED 0 +#define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 #define TEMP_SENSOR_COOLER 0 @@ -517,9 +522,10 @@ #define DEFAULT_Ki_LIST { 1.08, 1.08 } #define DEFAULT_Kd_LIST { 114.00, 114.00 } #else - #define DEFAULT_Kp 22.20 - #define DEFAULT_Ki 1.08 - #define DEFAULT_Kd 114.00 + // Chiron + #define DEFAULT_Kp 14.51 + #define DEFAULT_Ki 0.86 + #define DEFAULT_Kd 60.97 #endif #endif // PIDTEMP @@ -540,7 +546,7 @@ * heater. If your configuration is significantly different than this and you don't understand * the issues involved, don't use bed PID until someone else verifies that your hardware works. */ -//#define PIDTEMPBED +#define PIDTEMPBED //#define BED_LIMIT_SWITCHING @@ -556,11 +562,10 @@ //#define MIN_BED_POWER 0 //#define PID_BED_DEBUG // Sends debug data to the serial port. - // 120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - // from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) - #define DEFAULT_bedKp 10.00 - #define DEFAULT_bedKi .023 - #define DEFAULT_bedKd 305.4 + // Chiron + #define DEFAULT_bedKp 83.15 + #define DEFAULT_bedKi 11.78 + #define DEFAULT_bedKd 146.74 // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. #endif // PIDTEMPBED @@ -634,7 +639,7 @@ * Note: For Bowden Extruders make this large enough to allow load/unload. */ #define PREVENT_LENGTHY_EXTRUDE -#define EXTRUDE_MAXLENGTH 200 +#define EXTRUDE_MAXLENGTH 700 //=========================================================================== //======================== Thermal Runaway Protection ======================= @@ -686,7 +691,7 @@ #define USE_XMIN_PLUG #define USE_YMIN_PLUG #define USE_ZMIN_PLUG -//#define USE_XMAX_PLUG +#define USE_XMAX_PLUG //#define USE_YMAX_PLUG //#define USE_ZMAX_PLUG @@ -717,8 +722,8 @@ #endif // Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. +#define X_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Y_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. #define Z_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. #define X_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. #define Y_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. @@ -748,7 +753,7 @@ #define Z_DRIVER_TYPE A4988 //#define X2_DRIVER_TYPE A4988 //#define Y2_DRIVER_TYPE A4988 -//#define Z2_DRIVER_TYPE A4988 +#define Z2_DRIVER_TYPE A4988 //#define Z3_DRIVER_TYPE A4988 //#define Z4_DRIVER_TYPE A4988 #define E0_DRIVER_TYPE A4988 @@ -806,14 +811,14 @@ * Override with M92 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 500 } +#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 100, 400, 405 } /** * Default Max Feed Rate (mm/s) * Override with M203 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 } +#define DEFAULT_MAX_FEEDRATE { 200, 200, 25, 25 } //#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 #if ENABLED(LIMITED_MAX_FR_EDITING) @@ -841,9 +846,9 @@ * M204 R Retract Acceleration * M204 T Travel Acceleration */ -#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves +#define DEFAULT_ACCELERATION 1500 // X, Y, Z and E acceleration for printing moves #define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves +#define DEFAULT_TRAVEL_ACCELERATION 1500 // X, Y, Z acceleration for travel (non printing) moves /** * Default Jerk limits (mm/s) @@ -877,7 +882,7 @@ * https://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html */ #if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.013 // (mm) Distance from real junction edge + #define JUNCTION_DEVIATION_MM 0.028 // (mm) Distance from real junction edge #define JD_HANDLE_SMALL_SEGMENTS // Use curvature estimation instead of just the junction angle // for small segments (< 1mm) with large junction angles (> 135°). #endif @@ -906,7 +911,7 @@ * The probe replaces the Z-MIN endstop and is used for Z homing. * (Automatically enables USE_PROBE_FOR_Z_HOMING.) */ -#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN +//#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN // Force the use of the probe for Z-axis homing //#define USE_PROBE_FOR_Z_HOMING @@ -946,7 +951,7 @@ * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. * (e.g., an inductive probe or a nozzle-based probe-switch.) */ -//#define FIX_MOUNTED_PROBE +#define FIX_MOUNTED_PROBE /** * Use the nozzle as the probe, as with a conductive @@ -1055,7 +1060,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +#define NOZZLE_TO_PROBE_OFFSET { 0, 0, -15 } // Most probes should stay away from the edges of the bed, but // with NOZZLE_AS_PROBE this can be negative for a wider probing area. @@ -1065,7 +1070,7 @@ #define XY_PROBE_FEEDRATE (133*60) // Feedrate (mm/min) for the first approach when double-probing (MULTIPLE_PROBING == 2) -#define Z_PROBE_FEEDRATE_FAST (4*60) +#define Z_PROBE_FEEDRATE_FAST (6*60) // Feedrate (mm/min) for the "accurate" probe of each point #define Z_PROBE_FEEDRATE_SLOW (Z_PROBE_FEEDRATE_FAST / 2) @@ -1106,7 +1111,7 @@ * A total of 2 does fast/slow probes with a weighted average. * A total of 3 or more adds more slow probes, taking the average. */ -//#define MULTIPLE_PROBING 2 +#define MULTIPLE_PROBING 2 //#define EXTRA_PROBING 1 /** @@ -1124,15 +1129,15 @@ * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. */ #define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow -#define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points +#define Z_CLEARANCE_BETWEEN_PROBES 8 // Z Clearance between probe points #define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes //#define Z_AFTER_PROBING 5 // Z position after probing is done -#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping +#define Z_PROBE_LOW_POINT -10 // Farthest distance below the trigger-point to go before stopping // For M851 give a range for adjusting the Z probe offset -#define Z_PROBE_OFFSET_RANGE_MIN -20 -#define Z_PROBE_OFFSET_RANGE_MAX 20 +#define Z_PROBE_OFFSET_RANGE_MIN -30 +#define Z_PROBE_OFFSET_RANGE_MAX 10 // Enable the M48 repeatability test to test probe accuracy //#define Z_MIN_PROBE_REPEATABILITY_TEST @@ -1190,9 +1195,9 @@ // @section machine // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR false +#define INVERT_X_DIR true #define INVERT_Y_DIR true -#define INVERT_Z_DIR false +#define INVERT_Z_DIR true // @section extruder @@ -1232,16 +1237,16 @@ // @section machine // The size of the printable area -#define X_BED_SIZE 200 -#define Y_BED_SIZE 200 +#define X_BED_SIZE 400 +#define Y_BED_SIZE 400 // Travel limits (mm) after homing, corresponding to endstop positions. -#define X_MIN_POS 0 +#define X_MIN_POS -10 #define Y_MIN_POS 0 #define Z_MIN_POS 0 -#define X_MAX_POS X_BED_SIZE -#define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 200 +#define X_MAX_POS X_BED_SIZE +10 +#define Y_MAX_POS Y_BED_SIZE +10 +#define Z_MAX_POS 455 /** * Software Endstops @@ -1285,12 +1290,12 @@ * RAMPS-based boards use SERVO3_PIN for the first runout sensor. * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. */ -//#define FILAMENT_RUNOUT_SENSOR +#define FILAMENT_RUNOUT_SENSOR #if ENABLED(FILAMENT_RUNOUT_SENSOR) #define FIL_RUNOUT_ENABLED_DEFAULT true // Enable the sensor on startup. Override with M412 followed by M500. #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. - #define FIL_RUNOUT_STATE LOW // Pin state indicating that filament is NOT present. + #define FIL_RUNOUT_STATE HIGH // Pin state indicating that filament is NOT present. #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. //#define WATCH_ALL_RUNOUT_SENSORS // Execute runout script on any triggering sensor, not only for the active extruder. @@ -1337,7 +1342,7 @@ // After a runout is detected, continue printing this length of filament // before executing the runout script. Useful for a sensor at the end of // a feed tube. Requires 4 bytes SRAM per sensor, plus 4 bytes overhead. - //#define FILAMENT_RUNOUT_DISTANCE_MM 25 + #define FILAMENT_RUNOUT_DISTANCE_MM 25 #ifdef FILAMENT_RUNOUT_DISTANCE_MM // Enable this option to use an encoder disc that toggles the runout pin @@ -1387,7 +1392,7 @@ */ //#define AUTO_BED_LEVELING_3POINT //#define AUTO_BED_LEVELING_LINEAR -//#define AUTO_BED_LEVELING_BILINEAR +#define AUTO_BED_LEVELING_BILINEAR //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING @@ -1397,7 +1402,7 @@ * leveling immediately after G28. */ //#define RESTORE_LEVELING_AFTER_G28 -//#define ENABLE_LEVELING_AFTER_G28 +#define ENABLE_LEVELING_AFTER_G28 /** * Auto-leveling needs preheating @@ -1424,7 +1429,7 @@ // Gradually reduce leveling correction until a set height is reached, // at which point movement will be level to the machine's XY plane. // The height can be set with M420 Z - #define ENABLE_LEVELING_FADE_HEIGHT + //#define ENABLE_LEVELING_FADE_HEIGHT #if ENABLED(ENABLE_LEVELING_FADE_HEIGHT) #define DEFAULT_LEVELING_FADE_HEIGHT 10.0 // (mm) Default fade height. #endif @@ -1454,7 +1459,7 @@ #if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR) // Set the number of grid points per dimension. - #define GRID_MAX_POINTS_X 3 + #define GRID_MAX_POINTS_X 5 #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X // Probe along the Y axis, advancing X after each column @@ -1565,7 +1570,7 @@ * Commands to execute at the end of G29 probing. * Useful to retract or move the Z probe out of the way. */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" +#define Z_PROBE_END_SCRIPT "G27/n G1 Y0 F5000" // @section homing @@ -1595,7 +1600,7 @@ #endif // Homing speeds (mm/min) -#define HOMING_FEEDRATE_MM_M { (50*60), (50*60), (4*60) } +#define HOMING_FEEDRATE_MM_M { (70*60), (70*60), (5*60) } // Validate that endstops are triggered on homing moves #define VALIDATE_HOMING_ENDSTOPS @@ -1672,12 +1677,12 @@ * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) */ -//#define EEPROM_SETTINGS // Persistent storage with M500 and M501 +#define EEPROM_SETTINGS // Persistent storage with M500 and M501 //#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. #define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load #if ENABLED(EEPROM_SETTINGS) - //#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. + #define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. #endif // @@ -1728,11 +1733,11 @@ * P1 Raise the nozzle always to Z-park height. * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. */ -//#define NOZZLE_PARK_FEATURE +#define NOZZLE_PARK_FEATURE #if ENABLED(NOZZLE_PARK_FEATURE) // Specify a park position as { X, Y, Z_raise } - #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 } + #define NOZZLE_PARK_POINT { X_MIN_POS, Y_MAX_POS, 5 } //#define NOZZLE_PARK_X_ONLY // X move only is required to park //#define NOZZLE_PARK_Y_ONLY // Y move only is required to park #define NOZZLE_PARK_Z_RAISE_MIN 2 // (mm) Always raise Z by at least this distance @@ -1845,7 +1850,7 @@ * * View the current statistics with M78. */ -//#define PRINTCOUNTER +#define PRINTCOUNTER #if ENABLED(PRINTCOUNTER) #define PRINTCOUNTER_SAVE_INTERVAL 60 // (minutes) EEPROM save interval during print #endif @@ -1936,7 +1941,7 @@ * SD Card support is disabled by default. If your controller has an SD slot, * you must uncomment the following option or it won't work. */ -//#define SDSUPPORT +#define SDSUPPORT /** * SD CARD: ENABLE CRC @@ -2014,7 +2019,7 @@ // If you have a speaker that can produce tones, enable it here. // By default Marlin assumes you have a buzzer with a fixed frequency. // -//#define SPEAKER +#define SPEAKER // // The duration and frequency for the UI feedback sound. @@ -2411,7 +2416,7 @@ // Touch-screen LCD for Anycubic printers // //#define ANYCUBIC_LCD_I3MEGA -//#define ANYCUBIC_LCD_CHIRON +#define ANYCUBIC_LCD_CHIRON #if EITHER(ANYCUBIC_LCD_I3MEGA, ANYCUBIC_LCD_CHIRON) #define LCD_SERIAL_PORT 3 // Default is 3 for Anycubic //#define ANYCUBIC_LCD_DEBUG diff --git a/config/examples/AnyCubic/Chiron/Configuration_adv.h b/config/examples/AnyCubic/Chiron/Configuration_adv.h index 5335fa012a..cf6da8ed66 100644 --- a/config/examples/AnyCubic/Chiron/Configuration_adv.h +++ b/config/examples/AnyCubic/Chiron/Configuration_adv.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "AnyCubic/Chiron" + /** * Configuration_adv.h * @@ -238,8 +240,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 40 // Seconds + #define THERMAL_PROTECTION_HYSTERESIS 10 // Degrees Celsius //#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops #if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP) @@ -258,7 +260,7 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 20 // Seconds + #define WATCH_TEMP_PERIOD 40 // Seconds #define WATCH_TEMP_INCREASE 2 // Degrees Celsius #endif @@ -266,13 +268,13 @@ * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 40 // Seconds + #define THERMAL_PROTECTION_BED_HYSTERESIS 4 // Degrees Celsius /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds + #define WATCH_BED_TEMP_PERIOD 40 // Seconds #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius #endif @@ -437,7 +439,7 @@ * Hotend Idle Timeout * Prevent filament in the nozzle from charring and causing a critical jam. */ -//#define HOTEND_IDLE_TIMEOUT +#define HOTEND_IDLE_TIMEOUT #if ENABLED(HOTEND_IDLE_TIMEOUT) #define HOTEND_IDLE_TIMEOUT_SEC (5*60) // (seconds) Time without extruder movement to trigger protection #define HOTEND_IDLE_MIN_TRIGGER 180 // (°C) Minimum temperature to enable hotend protection @@ -461,9 +463,9 @@ * The fan turns on automatically whenever any driver is enabled and turns * off (or reduces to idle speed) shortly after drivers are turned off. */ -//#define USE_CONTROLLER_FAN +#define USE_CONTROLLER_FAN #if ENABLED(USE_CONTROLLER_FAN) - //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan + #define CONTROLLER_FAN_PIN TG_FAN1_PIN // Set a custom pin for the controller fan //#define CONTROLLER_FAN_USE_Z_ONLY // With this option only the Z axis is considered //#define CONTROLLER_FAN_IGNORE_Z // Ignore Z stepper. Useful when stepper timeout is disabled. #define CONTROLLERFAN_SPEED_MIN 0 // (0-255) Minimum speed. (If set below this value the fan is turned off.) @@ -540,7 +542,7 @@ * Multiple extruders can be assigned to the same pin in which case * the fan will turn on when any selected extruder is above the threshold. */ -#define E0_AUTO_FAN_PIN -1 +#define E0_AUTO_FAN_PIN 44 #define E1_AUTO_FAN_PIN -1 #define E2_AUTO_FAN_PIN -1 #define E3_AUTO_FAN_PIN -1 @@ -552,7 +554,7 @@ #define COOLER_AUTO_FAN_PIN -1 #define COOLER_FAN_PIN -1 -#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 +#define EXTRUDER_AUTO_FAN_TEMPERATURE 80 #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define CHAMBER_AUTO_FAN_TEMPERATURE 30 #define CHAMBER_AUTO_FAN_SPEED 255 @@ -648,7 +650,7 @@ // // For Z set the number of stepper drivers // -#define NUM_Z_STEPPER_DRIVERS 1 // (1-4) Z options change based on how many +#define NUM_Z_STEPPER_DRIVERS 2 // (1-4) Z options change based on how many #if NUM_Z_STEPPER_DRIVERS > 1 // Enable if Z motor direction signals are the opposite of Z1 @@ -656,7 +658,7 @@ //#define INVERT_Z3_VS_Z_DIR //#define INVERT_Z4_VS_Z_DIR - //#define Z_MULTI_ENDSTOPS + #define Z_MULTI_ENDSTOPS #if ENABLED(Z_MULTI_ENDSTOPS) #define Z2_USE_ENDSTOP _XMAX_ #define Z2_ENDSTOP_ADJUSTMENT 0 @@ -741,7 +743,7 @@ //#define HOMING_BACKOFF_POST_MM { 2, 2, 2 } // (mm) Backoff from endstops after homing -//#define QUICK_HOME // If G28 contains XY do a diagonal move first +#define QUICK_HOME // If G28 contains XY do a diagonal move first //#define HOME_Y_BEFORE_X // If G28 contains XY home Y before X //#define HOME_Z_FIRST // Home Z first. Requires a Z-MIN endstop (not a probe). //#define CODEPENDENT_XY_HOMING // If X/Y can't home without homing Y/X first @@ -928,7 +930,7 @@ #define DEFAULT_STEPPER_DEACTIVE_TIME 120 #define DISABLE_INACTIVE_X true #define DISABLE_INACTIVE_Y true -#define DISABLE_INACTIVE_Z true // Set 'false' if the nozzle could fall onto your printed part! +#define DISABLE_INACTIVE_Z false // Set 'false' if the nozzle could fall onto your printed part! #define DISABLE_INACTIVE_E true // Default Minimum Feedrates for printing and travel moves @@ -1235,7 +1237,7 @@ //#define LCD_DECIMAL_SMALL_XY // Add an 'M73' G-code to set the current percentage - //#define LCD_SET_PROGRESS_MANUALLY + #define LCD_SET_PROGRESS_MANUALLY // Show the E position (filament used) during printing //#define LCD_SHOW_E_TOTAL @@ -1288,20 +1290,20 @@ #define SD_PROCEDURE_DEPTH 1 // Increase if you need more nested M32 calls #define SD_FINISHED_STEPPERRELEASE true // Disable steppers when SD Print is finished - #define SD_FINISHED_RELEASECOMMAND "M84" // Use "M84XYE" to keep Z enabled so your bed stays in place + #define SD_FINISHED_RELEASECOMMAND "M84XYE" // Use "M84XYE" to keep Z enabled so your bed stays in place // Reverse SD sort to show "more recent" files first, according to the card's FAT. // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended. - #define SDCARD_RATHERRECENTFIRST + //#define SDCARD_RATHERRECENTFIRST - #define SD_MENU_CONFIRM_START // Confirm the selected SD file before printing + //#define SD_MENU_CONFIRM_START // Confirm the selected SD file before printing //#define NO_SD_AUTOSTART // Remove auto#.g file support completely to save some Flash, SRAM //#define MENU_ADDAUTOSTART // Add a menu option to run auto#.g files //#define BROWSE_MEDIA_ON_INSERT // Open the file browser when media is inserted - #define EVENT_GCODE_SD_ABORT "G28XY" // G-code to run on SD Abort Print (e.g., "G28XY" or "G27") + #define EVENT_GCODE_SD_ABORT "G27" // G-code to run on SD Abort Print (e.g., "G28XY" or "G27") #if ENABLED(PRINTER_EVENT_LEDS) #define PE_LEDS_COMPLETED_TIME (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination @@ -1315,16 +1317,16 @@ * an option on the LCD screen to continue the print from the last-known * point in the file. */ - //#define POWER_LOSS_RECOVERY + #define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) - #define PLR_ENABLED_DEFAULT false // Power Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + #define PLR_ENABLED_DEFAULT true // Power Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) //#define BACKUP_POWER_SUPPLY // Backup power / UPS to move the steppers on power loss //#define POWER_LOSS_ZRAISE 2 // (mm) Z axis raise on resume (on power loss with UPS) - //#define POWER_LOSS_PIN 44 // Pin to detect power loss. Set to -1 to disable default pin on boards without module. - //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss + #define POWER_LOSS_PIN 79 // Pin to detect power loss. Set to -1 to disable default pin on boards without module. + #define POWER_LOSS_STATE LOW // State of pin indicating power loss //#define POWER_LOSS_PULLUP // Set pullup / pulldown as appropriate for your sensor - //#define POWER_LOSS_PULLDOWN - //#define POWER_LOSS_PURGE_LEN 20 // (mm) Length of filament to purge on resume + #define POWER_LOSS_PULLDOWN + #define POWER_LOSS_PURGE_LEN 1 // (mm) Length of filament to purge on resume //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power. // Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card, @@ -1332,9 +1334,9 @@ #define POWER_LOSS_MIN_Z_CHANGE 0.05 // (mm) Minimum Z change before saving power-loss data // Enable if Z homing is needed for proper recovery. 99.9% of the time this should be disabled! - //#define POWER_LOSS_RECOVER_ZHOME + #define POWER_LOSS_RECOVER_ZHOME #if ENABLED(POWER_LOSS_RECOVER_ZHOME) - //#define POWER_LOSS_ZHOME_POS { 0, 0 } // Safe XY position to home Z while avoiding objects on the bed + #define POWER_LOSS_ZHOME_POS { 0, 0 } // Safe XY position to home Z while avoiding objects on the bed #endif #endif @@ -1361,12 +1363,12 @@ * - SDSORT_CACHE_NAMES will retain the sorted file listing in RAM. (Expensive!) * - SDSORT_DYNAMIC_RAM only uses RAM when the SD menu is visible. (Use with caution!) */ - //#define SDCARD_SORT_ALPHA + #define SDCARD_SORT_ALPHA // SD Card Sorting options #if ENABLED(SDCARD_SORT_ALPHA) #define SDSORT_LIMIT 40 // Maximum number of sorted items (10-256). Costs 27 bytes each. - #define FOLDER_SORTING -1 // -1=above 0=none 1=below + #define FOLDER_SORTING 1 // -1=above 0=none 1=below #define SDSORT_GCODE false // Allow turning sorting on/off with LCD and M34 G-code. #define SDSORT_USES_RAM false // Pre-allocate a static array for faster pre-sorting. #define SDSORT_USES_STACK false // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.) @@ -1790,7 +1792,7 @@ * * Warning: Does not respect endstops! */ -//#define BABYSTEPPING +#define BABYSTEPPING #if ENABLED(BABYSTEPPING) //#define INTEGRATED_BABYSTEPPING // EXPERIMENTAL integration of babystepping into the Stepper ISR //#define BABYSTEP_WITHOUT_HOMING @@ -1837,10 +1839,10 @@ * * See https://marlinfw.org/docs/features/lin_advance.html for full instructions. */ -//#define LIN_ADVANCE +#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) //#define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants - #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed + #define LIN_ADVANCE_K 0.05 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // If enabled, this will generate debug information output over USB. //#define EXPERIMENTAL_SCURVE // Enable this option to permit S-Curve Acceleration #endif @@ -2141,7 +2143,7 @@ * Currently handles M108, M112, M410, M876 * NOTE: Not yet implemented for all platforms. */ -//#define EMERGENCY_PARSER +#define EMERGENCY_PARSER /** * Realtime Reporting (requires EMERGENCY_PARSER) @@ -2311,48 +2313,48 @@ * * Enable PARK_HEAD_ON_PAUSE to add the G-code M125 Pause and Park. */ -//#define ADVANCED_PAUSE_FEATURE +#define ADVANCED_PAUSE_FEATURE #if ENABLED(ADVANCED_PAUSE_FEATURE) #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. // This short retract is done immediately, before parking the nozzle. - #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast. - #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload. + #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 20 // (mm/s) Unload filament feedrate. This can be pretty fast. + #define FILAMENT_CHANGE_UNLOAD_ACCEL 20 // (mm/s^2) Lower acceleration may allow a faster feedrate. + #define FILAMENT_CHANGE_UNLOAD_LENGTH 560 // (mm) The length of filament for a complete unload. // For Bowden, the full length of the tube and nozzle. // For direct drive, the full length of the nozzle. // Set to 0 for manual unloading. #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE 6 // (mm/s) Slow move when starting load. #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 0 // (mm) Slow length, to allow time to insert material. // 0 to disable start loading and skip to fast load only - #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast. - #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle. + #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 15 // (mm/s) Load filament feedrate. This can be pretty fast. + #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 20 // (mm/s^2) Lower acceleration may allow a faster feedrate. + #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 500 // (mm) Load length of filament, from extruder gear to nozzle. // For Bowden, the full length of the tube and nozzle. // For direct drive, the full length of the nozzle. - //#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted. - #define ADVANCED_PAUSE_PURGE_FEEDRATE 3 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate. + #define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted. + #define ADVANCED_PAUSE_PURGE_FEEDRATE 5 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate. #define ADVANCED_PAUSE_PURGE_LENGTH 50 // (mm) Length to extrude after loading. // Set to 0 for manual extrusion. // Filament can be extruded repeatedly from the Filament Change menu // until extrusion is consistent, and to purge old filament. #define ADVANCED_PAUSE_RESUME_PRIME 0 // (mm) Extra distance to prime nozzle after returning from park. - //#define ADVANCED_PAUSE_FANS_PAUSE // Turn off print-cooling fans while the machine is paused. + #define ADVANCED_PAUSE_FANS_PAUSE // Turn off print-cooling fans while the machine is paused. // Filament Unload does a Retract, Delay, and Purge first: - #define FILAMENT_UNLOAD_PURGE_RETRACT 13 // (mm) Unload initial retract length. - #define FILAMENT_UNLOAD_PURGE_DELAY 5000 // (ms) Delay for the filament to cool after retract. - #define FILAMENT_UNLOAD_PURGE_LENGTH 8 // (mm) An unretract is done, then this length is purged. + #define FILAMENT_UNLOAD_PURGE_RETRACT 5 // (mm) Unload initial retract length. + #define FILAMENT_UNLOAD_PURGE_DELAY 3000 // (ms) Delay for the filament to cool after retract. + #define FILAMENT_UNLOAD_PURGE_LENGTH 0 // (mm) An unretract is done, then this length is purged. #define FILAMENT_UNLOAD_PURGE_FEEDRATE 25 // (mm/s) feedrate to purge before unload - #define PAUSE_PARK_NOZZLE_TIMEOUT 45 // (seconds) Time limit before the nozzle is turned off for safety. - #define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed. + #define PAUSE_PARK_NOZZLE_TIMEOUT 180 // (seconds) Time limit before the nozzle is turned off for safety. + #define FILAMENT_CHANGE_ALERT_BEEPS 0 // Number of alert beeps to play when a response is needed. #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change. - //#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. - //#define HOME_BEFORE_FILAMENT_CHANGE // If needed, home before parking for filament change + #define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. + #define HOME_BEFORE_FILAMENT_CHANGE // If needed, home before parking for filament change - //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. + #define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) #endif @@ -2719,7 +2721,7 @@ * Define your own with: * { , , hysteresis_start[1..8] } */ - #define CHOPPER_TIMING CHOPPER_DEFAULT_12V // All axes (override below) + #define CHOPPER_TIMING CHOPPER_DEFAULT_24V // All axes (override below) //#define CHOPPER_TIMING_X CHOPPER_TIMING // For X Axes (override below) //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X //#define CHOPPER_TIMING_Y CHOPPER_TIMING // For Y Axes (override below) @@ -3650,9 +3652,9 @@ * Host Prompt Support enables Marlin to use the host for user prompts so * filament runout and other processes can be managed from the host side. */ -//#define HOST_ACTION_COMMANDS +#define HOST_ACTION_COMMANDS #if ENABLED(HOST_ACTION_COMMANDS) - //#define HOST_PROMPT_SUPPORT + #define HOST_PROMPT_SUPPORT //#define HOST_START_MENU_ITEM // Add a menu item that tells the host to start #endif diff --git a/config/examples/AnyCubic/Mega Zero 2.0/Anycubic V1/Configuration.h b/config/examples/AnyCubic/Mega Zero 2.0/Anycubic V1/Configuration.h index 78c2dc9160..501ee2fd65 100644 --- a/config/examples/AnyCubic/Mega Zero 2.0/Anycubic V1/Configuration.h +++ b/config/examples/AnyCubic/Mega Zero 2.0/Anycubic V1/Configuration.h @@ -1,6 +1,6 @@ /** * Marlin 3D Printer Firmware - * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * Copyright (c) 2021 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * * Based on Sprinter and grbl. * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "AnyCubic/Mega Zero 2.0/Anycubic V1" + /** * Configuration.h * @@ -69,7 +71,7 @@ // @section info // Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes. +#define STRING_CONFIG_H_AUTHOR "(Dust, Anycubic Mega 2.0)" // Who made the changes. //#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) /** @@ -87,10 +89,10 @@ #define SHOW_BOOTSCREEN // Show the bitmap in Marlin/_Bootscreen.h on startup. -//#define SHOW_CUSTOM_BOOTSCREEN +#define SHOW_CUSTOM_BOOTSCREEN // Show the bitmap in Marlin/_Statusscreen.h on the status screen. -//#define CUSTOM_STATUS_SCREEN_IMAGE +#define CUSTOM_STATUS_SCREEN_IMAGE // @section machine @@ -134,15 +136,16 @@ // Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_RAMPS_14_EFB + #define MOTHERBOARD BOARD_MELZI_CREALITY #endif // Name displayed in the LCD "Ready" message and Info menu -//#define CUSTOM_MACHINE_NAME "3D Printer" +#define CUSTOM_MACHINE_NAME "Mega Zero 2.0" // Printer's unique ID, used by some programs to differentiate between machines. // Choose your own or use a service like https://www.uuidgenerator.net/version4 //#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" +#define MACHINE_UUID "4185380a-9754-11eb-a8b3-0242ac130003" // @section extruder @@ -424,7 +427,7 @@ #define TEMP_SENSOR_5 0 #define TEMP_SENSOR_6 0 #define TEMP_SENSOR_7 0 -#define TEMP_SENSOR_BED 0 +#define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 #define TEMP_SENSOR_COOLER 0 @@ -472,15 +475,15 @@ // Above this temperature the heater will be switched off. // This can protect components from overheating, but NOT from shorts and failures. // (Use MINTEMP for thermistor short/failure protection.) -#define HEATER_0_MAXTEMP 275 -#define HEATER_1_MAXTEMP 275 -#define HEATER_2_MAXTEMP 275 -#define HEATER_3_MAXTEMP 275 -#define HEATER_4_MAXTEMP 275 -#define HEATER_5_MAXTEMP 275 -#define HEATER_6_MAXTEMP 275 -#define HEATER_7_MAXTEMP 275 -#define BED_MAXTEMP 150 +#define HEATER_0_MAXTEMP 260 +#define HEATER_1_MAXTEMP 260 +#define HEATER_2_MAXTEMP 260 +#define HEATER_3_MAXTEMP 260 +#define HEATER_4_MAXTEMP 260 +#define HEATER_5_MAXTEMP 260 +#define HEATER_6_MAXTEMP 260 +#define HEATER_7_MAXTEMP 260 +#define BED_MAXTEMP 125 #define CHAMBER_MAXTEMP 60 /** @@ -505,21 +508,22 @@ #define PID_K1 0.95 // Smoothing factor within any PID loop #if ENABLED(PIDTEMP) - //#define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) - //#define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) + #define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) + #define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) // Set/get with gcode: M301 E[extruder number, 0-2] + // Anycubic Mega Zero, generated with M303 C8 S190 #if ENABLED(PID_PARAMS_PER_HOTEND) // Specify between 1 and HOTENDS values per array. // If fewer than EXTRUDER values are provided, the last element will be repeated. - #define DEFAULT_Kp_LIST { 22.20, 22.20 } - #define DEFAULT_Ki_LIST { 1.08, 1.08 } - #define DEFAULT_Kd_LIST { 114.00, 114.00 } + #define DEFAULT_Kp_LIST { 17.72, 17.72 } + #define DEFAULT_Ki_LIST { 1.18, 1.18 } + #define DEFAULT_Kd_LIST { 66.76, 66.76 } #else - #define DEFAULT_Kp 22.20 - #define DEFAULT_Ki 1.08 - #define DEFAULT_Kd 114.00 + #define DEFAULT_Kp 17.72 + #define DEFAULT_Ki 1.18 + #define DEFAULT_Kd 66.76 #endif #endif // PIDTEMP @@ -540,7 +544,7 @@ * heater. If your configuration is significantly different than this and you don't understand * the issues involved, don't use bed PID until someone else verifies that your hardware works. */ -//#define PIDTEMPBED +#define PIDTEMPBED //#define BED_LIMIT_SWITCHING @@ -558,9 +562,9 @@ // 120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) // from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) - #define DEFAULT_bedKp 10.00 - #define DEFAULT_bedKi .023 - #define DEFAULT_bedKd 305.4 + #define DEFAULT_bedKp 405.45 + #define DEFAULT_bedKi 78.56 + #define DEFAULT_bedKd 523.14 // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. #endif // PIDTEMPBED @@ -806,14 +810,14 @@ * Override with M92 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 500 } +#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 415 } /** * Default Max Feed Rate (mm/s) * Override with M203 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 } +#define DEFAULT_MAX_FEEDRATE { 500, 500, 5, 25 } //#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 #if ENABLED(LIMITED_MAX_FR_EDITING) @@ -826,7 +830,7 @@ * Override with M201 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 } +#define DEFAULT_MAX_ACCELERATION { 500, 500, 100, 1000 } //#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 #if ENABLED(LIMITED_MAX_ACCEL_EDITING) @@ -841,9 +845,9 @@ * M204 R Retract Acceleration * M204 T Travel Acceleration */ -#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves +#define DEFAULT_ACCELERATION 500 // X, Y, Z and E acceleration for printing moves +#define DEFAULT_RETRACT_ACCELERATION 500 // E acceleration for retracts +#define DEFAULT_TRAVEL_ACCELERATION 500 // X, Y, Z acceleration for travel (non printing) moves /** * Default Jerk limits (mm/s) @@ -877,7 +881,7 @@ * https://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html */ #if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.013 // (mm) Distance from real junction edge + #define JUNCTION_DEVIATION_MM 0.08 // (mm) Distance from real junction edge #define JD_HANDLE_SMALL_SEGMENTS // Use curvature estimation instead of just the junction angle // for small segments (< 1mm) with large junction angles (> 135°). #endif @@ -890,7 +894,7 @@ * * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained */ -//#define S_CURVE_ACCELERATION +#define S_CURVE_ACCELERATION //=========================================================================== //============================= Z Probe Options ============================= @@ -1055,7 +1059,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +#define NOZZLE_TO_PROBE_OFFSET { -40, -10, 2 } // Most probes should stay away from the edges of the bed, but // with NOZZLE_AS_PROBE this can be negative for a wider probing area. @@ -1190,7 +1194,7 @@ // @section machine // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR false +#define INVERT_X_DIR true #define INVERT_Y_DIR true #define INVERT_Z_DIR false @@ -1232,16 +1236,16 @@ // @section machine // The size of the printable area -#define X_BED_SIZE 200 -#define Y_BED_SIZE 200 +#define X_BED_SIZE 220 +#define Y_BED_SIZE 220 // Travel limits (mm) after homing, corresponding to endstop positions. -#define X_MIN_POS 0 +#define X_MIN_POS -9 #define Y_MIN_POS 0 #define Z_MIN_POS 0 #define X_MAX_POS X_BED_SIZE #define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 200 +#define Z_MAX_POS 250 /** * Software Endstops @@ -1389,14 +1393,14 @@ //#define AUTO_BED_LEVELING_LINEAR //#define AUTO_BED_LEVELING_BILINEAR //#define AUTO_BED_LEVELING_UBL -//#define MESH_BED_LEVELING +#define MESH_BED_LEVELING /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable * leveling immediately after G28. */ -//#define RESTORE_LEVELING_AFTER_G28 +#define RESTORE_LEVELING_AFTER_G28 //#define ENABLE_LEVELING_AFTER_G28 /** @@ -1518,16 +1522,16 @@ * Add a bed leveling sub-menu for ABL or MBL. * Include a guided procedure if manual probing is enabled. */ -//#define LCD_BED_LEVELING +#define LCD_BED_LEVELING #if ENABLED(LCD_BED_LEVELING) #define MESH_EDIT_Z_STEP 0.025 // (mm) Step size while manually probing Z axis. #define LCD_PROBE_Z_RANGE 4 // (mm) Z Range centered on Z_MIN_POS for LCD Z adjustment - //#define MESH_EDIT_MENU // Add a menu to edit mesh points + #define MESH_EDIT_MENU // Add a menu to edit mesh points #endif // Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS +#define LEVEL_BED_CORNERS #if ENABLED(LEVEL_BED_CORNERS) #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets @@ -1672,7 +1676,7 @@ * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) */ -//#define EEPROM_SETTINGS // Persistent storage with M500 and M501 +#define EEPROM_SETTINGS // Persistent storage with M500 and M501 //#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. #define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load @@ -1706,13 +1710,13 @@ // Preheat Constants - Up to 5 are supported without changes // #define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 180 +#define PREHEAT_1_TEMP_HOTEND 190 #define PREHEAT_1_TEMP_BED 70 #define PREHEAT_1_TEMP_CHAMBER 35 #define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 -#define PREHEAT_2_LABEL "ABS" -#define PREHEAT_2_TEMP_HOTEND 240 +#define PREHEAT_2_LABEL "PETG" +#define PREHEAT_2_TEMP_HOTEND 230 #define PREHEAT_2_TEMP_BED 110 #define PREHEAT_2_TEMP_CHAMBER 35 #define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 @@ -1921,7 +1925,7 @@ * * :['JAPANESE', 'WESTERN', 'CYRILLIC'] */ -#define DISPLAY_CHARSET_HD44780 JAPANESE +#define DISPLAY_CHARSET_HD44780 WESTERN /** * Info Screen Style (0:Classic, 1:Průša) @@ -1936,7 +1940,7 @@ * SD Card support is disabled by default. If your controller has an SD slot, * you must uncomment the following option or it won't work. */ -//#define SDSUPPORT +#define SDSUPPORT /** * SD CARD: ENABLE CRC @@ -1952,7 +1956,7 @@ * just remove some extraneous menu items to recover space. */ //#define NO_LCD_MENUS -//#define SLIM_LCD_MENUS +#define SLIM_LCD_MENUS // // ENCODER SETTINGS @@ -2006,7 +2010,7 @@ // // Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. // -//#define INDIVIDUAL_AXIS_HOMING_MENU +#define INDIVIDUAL_AXIS_HOMING_MENU // // SPEAKER/BUZZER @@ -2014,7 +2018,7 @@ // If you have a speaker that can produce tones, enable it here. // By default Marlin assumes you have a buzzer with a fixed frequency. // -//#define SPEAKER +#define SPEAKER // // The duration and frequency for the UI feedback sound. @@ -2195,7 +2199,7 @@ // RepRapDiscount FULL GRAPHIC Smart Controller // https://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller // -//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER +#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER // // K.3D Full Graphic Smart Controller diff --git a/config/examples/AnyCubic/Mega Zero 2.0/Anycubic V1/Configuration_adv.h b/config/examples/AnyCubic/Mega Zero 2.0/Anycubic V1/Configuration_adv.h index 5335fa012a..047dfad52f 100644 --- a/config/examples/AnyCubic/Mega Zero 2.0/Anycubic V1/Configuration_adv.h +++ b/config/examples/AnyCubic/Mega Zero 2.0/Anycubic V1/Configuration_adv.h @@ -1,6 +1,6 @@ /** * Marlin 3D Printer Firmware - * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * Copyright (c) 2021 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * * Based on Sprinter and grbl. * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "AnyCubic/Mega Zero 2.0/Anycubic V1" + /** * Configuration_adv.h * @@ -741,7 +743,7 @@ //#define HOMING_BACKOFF_POST_MM { 2, 2, 2 } // (mm) Backoff from endstops after homing -//#define QUICK_HOME // If G28 contains XY do a diagonal move first +#define QUICK_HOME // If G28 contains XY do a diagonal move first //#define HOME_Y_BEFORE_X // If G28 contains XY home Y before X //#define HOME_Z_FIRST // Home Z first. Requires a Z-MIN endstop (not a probe). //#define CODEPENDENT_XY_HOMING // If X/Y can't home without homing Y/X first @@ -1134,7 +1136,7 @@ // @section lcd #if EITHER(IS_ULTIPANEL, EXTENSIBLE_UI) - #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel + #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 10*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines #if IS_ULTIPANEL #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position" @@ -1175,13 +1177,13 @@ #endif // Include a page of printer information in the LCD Main Menu - //#define LCD_INFO_MENU + #define LCD_INFO_MENU #if ENABLED(LCD_INFO_MENU) //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages #endif // BACK menu items keep the highlight at the top - //#define TURBO_BACK_MENU_ITEM + #define TURBO_BACK_MENU_ITEM // Add a mute option to the LCD menu //#define SOUND_MENU_ITEM @@ -1229,23 +1231,23 @@ #endif // Scroll a longer status message into view - //#define STATUS_MESSAGE_SCROLLING + #define STATUS_MESSAGE_SCROLLING // On the Info Screen, display XY with one decimal place when possible //#define LCD_DECIMAL_SMALL_XY // Add an 'M73' G-code to set the current percentage - //#define LCD_SET_PROGRESS_MANUALLY + #define LCD_SET_PROGRESS_MANUALLY // Show the E position (filament used) during printing //#define LCD_SHOW_E_TOTAL #endif #if EITHER(SDSUPPORT, LCD_SET_PROGRESS_MANUALLY) && ANY(HAS_MARLINUI_U8GLIB, HAS_MARLINUI_HD44780, IS_TFTGLCD_PANEL, EXTENSIBLE_UI) - //#define SHOW_REMAINING_TIME // Display estimated time to completion + #define SHOW_REMAINING_TIME // Display estimated time to completion #if ENABLED(SHOW_REMAINING_TIME) - //#define USE_M73_REMAINING_TIME // Use remaining time from M73 command instead of estimation - //#define ROTATE_PROGRESS_DISPLAY // Display (P)rogress, (E)lapsed, and (R)emaining time + #define USE_M73_REMAINING_TIME // Use remaining time from M73 command instead of estimation + #define ROTATE_PROGRESS_DISPLAY // Display (P)rogress, (E)lapsed, and (R)emaining time #endif #if EITHER(HAS_MARLINUI_U8GLIB, EXTENSIBLE_UI) @@ -1384,7 +1386,7 @@ //#define LONG_FILENAME_HOST_SUPPORT // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES + #define SCROLL_LONG_FILENAMES // Leave the heaters on after Stop Print (not recommended!) //#define SD_ABORT_NO_COOLDOWN @@ -1512,7 +1514,7 @@ */ #if HAS_MARLINUI_U8GLIB // Show SD percentage next to the progress bar - //#define DOGM_SD_PERCENT + #define DOGM_SD_PERCENT // Save many cycles by drawing a hollow frame or no frame on the Info Screen //#define XYZ_NO_FRAME @@ -1790,7 +1792,7 @@ * * Warning: Does not respect endstops! */ -//#define BABYSTEPPING +#define BABYSTEPPING #if ENABLED(BABYSTEPPING) //#define INTEGRATED_BABYSTEPPING // EXPERIMENTAL integration of babystepping into the Stepper ISR //#define BABYSTEP_WITHOUT_HOMING @@ -1801,7 +1803,7 @@ #define BABYSTEP_MULTIPLICATOR_Z 1 // (steps or mm) Steps or millimeter distance for each Z babystep #define BABYSTEP_MULTIPLICATOR_XY 1 // (steps or mm) Steps or millimeter distance for each XY babystep - //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. + #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. // Note: Extra time may be added to mitigate controller latency. @@ -1982,7 +1984,7 @@ // // G2/G3 Arc Support // -#define ARC_SUPPORT // Disable this feature to save ~3226 bytes +//#define ARC_SUPPORT // Disable this feature to save ~3226 bytes #if ENABLED(ARC_SUPPORT) #define MM_PER_ARC_SEGMENT 1 // (mm) Length (or minimum length) of each arc segment //#define ARC_SEGMENTS_PER_R 1 // Max segment length, MM_PER = Min @@ -3439,7 +3441,7 @@ /** * Disable all Volumetric extrusion options */ -//#define NO_VOLUMETRICS +#define NO_VOLUMETRICS #if DISABLED(NO_VOLUMETRICS) /** @@ -3471,7 +3473,7 @@ * - M206 and M428 are disabled. * - G92 will revert to its behavior from Marlin 1.0. */ -//#define NO_WORKSPACE_OFFSETS +#define NO_WORKSPACE_OFFSETS // Extra options for the M114 "Current Position" report //#define M114_DETAIL // Use 'M114` for details to check planner calculations diff --git a/config/examples/AnyCubic/Mega Zero/Anycubic V1/Configuration.h b/config/examples/AnyCubic/Mega Zero/Anycubic V1/Configuration.h index 78c2dc9160..4318cfc31c 100644 --- a/config/examples/AnyCubic/Mega Zero/Anycubic V1/Configuration.h +++ b/config/examples/AnyCubic/Mega Zero/Anycubic V1/Configuration.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "AnyCubic/Mega Zero/Anycubic V1" + /** * Configuration.h * @@ -69,7 +71,7 @@ // @section info // Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes. +#define STRING_CONFIG_H_AUTHOR "(kad, Anycubic Mega Zero)" // Who made the changes. //#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) /** @@ -87,10 +89,10 @@ #define SHOW_BOOTSCREEN // Show the bitmap in Marlin/_Bootscreen.h on startup. -//#define SHOW_CUSTOM_BOOTSCREEN +#define SHOW_CUSTOM_BOOTSCREEN // Show the bitmap in Marlin/_Statusscreen.h on the status screen. -//#define CUSTOM_STATUS_SCREEN_IMAGE +#define CUSTOM_STATUS_SCREEN_IMAGE // @section machine @@ -127,22 +129,23 @@ * * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ -#define BAUDRATE 250000 +#define BAUDRATE 115200 // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH // Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_RAMPS_14_EFB + #define MOTHERBOARD BOARD_MELZI_CREALITY #endif // Name displayed in the LCD "Ready" message and Info menu -//#define CUSTOM_MACHINE_NAME "3D Printer" +#define CUSTOM_MACHINE_NAME "Mega Zero" // Printer's unique ID, used by some programs to differentiate between machines. // Choose your own or use a service like https://www.uuidgenerator.net/version4 //#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" +#define MACHINE_UUID "b330ff10-580e-4248-b12a-8d3a3f2ef9f0" // @section extruder @@ -472,15 +475,15 @@ // Above this temperature the heater will be switched off. // This can protect components from overheating, but NOT from shorts and failures. // (Use MINTEMP for thermistor short/failure protection.) -#define HEATER_0_MAXTEMP 275 -#define HEATER_1_MAXTEMP 275 -#define HEATER_2_MAXTEMP 275 -#define HEATER_3_MAXTEMP 275 -#define HEATER_4_MAXTEMP 275 -#define HEATER_5_MAXTEMP 275 -#define HEATER_6_MAXTEMP 275 -#define HEATER_7_MAXTEMP 275 -#define BED_MAXTEMP 150 +#define HEATER_0_MAXTEMP 260 +#define HEATER_1_MAXTEMP 260 +#define HEATER_2_MAXTEMP 260 +#define HEATER_3_MAXTEMP 260 +#define HEATER_4_MAXTEMP 260 +#define HEATER_5_MAXTEMP 260 +#define HEATER_6_MAXTEMP 260 +#define HEATER_7_MAXTEMP 260 +#define BED_MAXTEMP 125 #define CHAMBER_MAXTEMP 60 /** @@ -505,21 +508,22 @@ #define PID_K1 0.95 // Smoothing factor within any PID loop #if ENABLED(PIDTEMP) - //#define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) - //#define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) + #define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) + #define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) // Set/get with gcode: M301 E[extruder number, 0-2] + // Anycubic Mega Zero, generated with M303 C8 S190 #if ENABLED(PID_PARAMS_PER_HOTEND) // Specify between 1 and HOTENDS values per array. // If fewer than EXTRUDER values are provided, the last element will be repeated. - #define DEFAULT_Kp_LIST { 22.20, 22.20 } - #define DEFAULT_Ki_LIST { 1.08, 1.08 } - #define DEFAULT_Kd_LIST { 114.00, 114.00 } + #define DEFAULT_Kp_LIST { 17.72, 17.72 } + #define DEFAULT_Ki_LIST { 1.18, 1.18 } + #define DEFAULT_Kd_LIST { 66.76, 66.76 } #else - #define DEFAULT_Kp 22.20 - #define DEFAULT_Ki 1.08 - #define DEFAULT_Kd 114.00 + #define DEFAULT_Kp 17.72 + #define DEFAULT_Ki 1.18 + #define DEFAULT_Kd 66.76 #endif #endif // PIDTEMP @@ -806,14 +810,14 @@ * Override with M92 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 500 } +#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 385 } /** * Default Max Feed Rate (mm/s) * Override with M203 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 } +#define DEFAULT_MAX_FEEDRATE { 500, 500, 5, 25 } //#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 #if ENABLED(LIMITED_MAX_FR_EDITING) @@ -826,7 +830,7 @@ * Override with M201 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 } +#define DEFAULT_MAX_ACCELERATION { 500, 500, 100, 5000 } //#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 #if ENABLED(LIMITED_MAX_ACCEL_EDITING) @@ -841,9 +845,9 @@ * M204 R Retract Acceleration * M204 T Travel Acceleration */ -#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves +#define DEFAULT_ACCELERATION 500 // X, Y, Z and E acceleration for printing moves +#define DEFAULT_RETRACT_ACCELERATION 500 // E acceleration for retracts +#define DEFAULT_TRAVEL_ACCELERATION 500 // X, Y, Z acceleration for travel (non printing) moves /** * Default Jerk limits (mm/s) @@ -877,7 +881,7 @@ * https://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html */ #if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.013 // (mm) Distance from real junction edge + #define JUNCTION_DEVIATION_MM 0.08 // (mm) Distance from real junction edge #define JD_HANDLE_SMALL_SEGMENTS // Use curvature estimation instead of just the junction angle // for small segments (< 1mm) with large junction angles (> 135°). #endif @@ -890,7 +894,7 @@ * * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained */ -//#define S_CURVE_ACCELERATION +#define S_CURVE_ACCELERATION //=========================================================================== //============================= Z Probe Options ============================= @@ -1055,7 +1059,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +#define NOZZLE_TO_PROBE_OFFSET { -40, -10, 2 } // Most probes should stay away from the edges of the bed, but // with NOZZLE_AS_PROBE this can be negative for a wider probing area. @@ -1190,7 +1194,7 @@ // @section machine // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR false +#define INVERT_X_DIR true #define INVERT_Y_DIR true #define INVERT_Z_DIR false @@ -1232,16 +1236,16 @@ // @section machine // The size of the printable area -#define X_BED_SIZE 200 -#define Y_BED_SIZE 200 +#define X_BED_SIZE 220 +#define Y_BED_SIZE 220 // Travel limits (mm) after homing, corresponding to endstop positions. -#define X_MIN_POS 0 +#define X_MIN_POS -9 #define Y_MIN_POS 0 #define Z_MIN_POS 0 #define X_MAX_POS X_BED_SIZE #define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 200 +#define Z_MAX_POS 250 /** * Software Endstops @@ -1389,14 +1393,14 @@ //#define AUTO_BED_LEVELING_LINEAR //#define AUTO_BED_LEVELING_BILINEAR //#define AUTO_BED_LEVELING_UBL -//#define MESH_BED_LEVELING +#define MESH_BED_LEVELING /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable * leveling immediately after G28. */ -//#define RESTORE_LEVELING_AFTER_G28 +#define RESTORE_LEVELING_AFTER_G28 //#define ENABLE_LEVELING_AFTER_G28 /** @@ -1518,16 +1522,16 @@ * Add a bed leveling sub-menu for ABL or MBL. * Include a guided procedure if manual probing is enabled. */ -//#define LCD_BED_LEVELING +#define LCD_BED_LEVELING #if ENABLED(LCD_BED_LEVELING) #define MESH_EDIT_Z_STEP 0.025 // (mm) Step size while manually probing Z axis. #define LCD_PROBE_Z_RANGE 4 // (mm) Z Range centered on Z_MIN_POS for LCD Z adjustment - //#define MESH_EDIT_MENU // Add a menu to edit mesh points + #define MESH_EDIT_MENU // Add a menu to edit mesh points #endif // Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS +#define LEVEL_BED_CORNERS #if ENABLED(LEVEL_BED_CORNERS) #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets @@ -1672,7 +1676,7 @@ * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) */ -//#define EEPROM_SETTINGS // Persistent storage with M500 and M501 +#define EEPROM_SETTINGS // Persistent storage with M500 and M501 //#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. #define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load @@ -1706,13 +1710,13 @@ // Preheat Constants - Up to 5 are supported without changes // #define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 180 +#define PREHEAT_1_TEMP_HOTEND 190 #define PREHEAT_1_TEMP_BED 70 #define PREHEAT_1_TEMP_CHAMBER 35 #define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 -#define PREHEAT_2_LABEL "ABS" -#define PREHEAT_2_TEMP_HOTEND 240 +#define PREHEAT_2_LABEL "PETG" +#define PREHEAT_2_TEMP_HOTEND 230 #define PREHEAT_2_TEMP_BED 110 #define PREHEAT_2_TEMP_CHAMBER 35 #define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 @@ -1921,7 +1925,7 @@ * * :['JAPANESE', 'WESTERN', 'CYRILLIC'] */ -#define DISPLAY_CHARSET_HD44780 JAPANESE +#define DISPLAY_CHARSET_HD44780 WESTERN /** * Info Screen Style (0:Classic, 1:Průša) @@ -1936,7 +1940,7 @@ * SD Card support is disabled by default. If your controller has an SD slot, * you must uncomment the following option or it won't work. */ -//#define SDSUPPORT +#define SDSUPPORT /** * SD CARD: ENABLE CRC @@ -1952,7 +1956,7 @@ * just remove some extraneous menu items to recover space. */ //#define NO_LCD_MENUS -//#define SLIM_LCD_MENUS +#define SLIM_LCD_MENUS // // ENCODER SETTINGS @@ -2006,7 +2010,7 @@ // // Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. // -//#define INDIVIDUAL_AXIS_HOMING_MENU +#define INDIVIDUAL_AXIS_HOMING_MENU // // SPEAKER/BUZZER @@ -2195,7 +2199,7 @@ // RepRapDiscount FULL GRAPHIC Smart Controller // https://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller // -//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER +#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER // // K.3D Full Graphic Smart Controller diff --git a/config/examples/AnyCubic/Mega Zero/Anycubic V1/Configuration_adv.h b/config/examples/AnyCubic/Mega Zero/Anycubic V1/Configuration_adv.h index 5335fa012a..ac3599977d 100644 --- a/config/examples/AnyCubic/Mega Zero/Anycubic V1/Configuration_adv.h +++ b/config/examples/AnyCubic/Mega Zero/Anycubic V1/Configuration_adv.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "AnyCubic/Mega Zero/Anycubic V1" + /** * Configuration_adv.h * @@ -741,7 +743,7 @@ //#define HOMING_BACKOFF_POST_MM { 2, 2, 2 } // (mm) Backoff from endstops after homing -//#define QUICK_HOME // If G28 contains XY do a diagonal move first +#define QUICK_HOME // If G28 contains XY do a diagonal move first //#define HOME_Y_BEFORE_X // If G28 contains XY home Y before X //#define HOME_Z_FIRST // Home Z first. Requires a Z-MIN endstop (not a probe). //#define CODEPENDENT_XY_HOMING // If X/Y can't home without homing Y/X first @@ -1134,7 +1136,7 @@ // @section lcd #if EITHER(IS_ULTIPANEL, EXTENSIBLE_UI) - #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel + #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 10*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines #if IS_ULTIPANEL #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position" @@ -1175,13 +1177,13 @@ #endif // Include a page of printer information in the LCD Main Menu - //#define LCD_INFO_MENU + #define LCD_INFO_MENU #if ENABLED(LCD_INFO_MENU) //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages #endif // BACK menu items keep the highlight at the top - //#define TURBO_BACK_MENU_ITEM + #define TURBO_BACK_MENU_ITEM // Add a mute option to the LCD menu //#define SOUND_MENU_ITEM @@ -1229,23 +1231,23 @@ #endif // Scroll a longer status message into view - //#define STATUS_MESSAGE_SCROLLING + #define STATUS_MESSAGE_SCROLLING // On the Info Screen, display XY with one decimal place when possible //#define LCD_DECIMAL_SMALL_XY // Add an 'M73' G-code to set the current percentage - //#define LCD_SET_PROGRESS_MANUALLY + #define LCD_SET_PROGRESS_MANUALLY // Show the E position (filament used) during printing //#define LCD_SHOW_E_TOTAL #endif #if EITHER(SDSUPPORT, LCD_SET_PROGRESS_MANUALLY) && ANY(HAS_MARLINUI_U8GLIB, HAS_MARLINUI_HD44780, IS_TFTGLCD_PANEL, EXTENSIBLE_UI) - //#define SHOW_REMAINING_TIME // Display estimated time to completion + #define SHOW_REMAINING_TIME // Display estimated time to completion #if ENABLED(SHOW_REMAINING_TIME) - //#define USE_M73_REMAINING_TIME // Use remaining time from M73 command instead of estimation - //#define ROTATE_PROGRESS_DISPLAY // Display (P)rogress, (E)lapsed, and (R)emaining time + #define USE_M73_REMAINING_TIME // Use remaining time from M73 command instead of estimation + #define ROTATE_PROGRESS_DISPLAY // Display (P)rogress, (E)lapsed, and (R)emaining time #endif #if EITHER(HAS_MARLINUI_U8GLIB, EXTENSIBLE_UI) @@ -1384,7 +1386,7 @@ //#define LONG_FILENAME_HOST_SUPPORT // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES + #define SCROLL_LONG_FILENAMES // Leave the heaters on after Stop Print (not recommended!) //#define SD_ABORT_NO_COOLDOWN @@ -1512,7 +1514,7 @@ */ #if HAS_MARLINUI_U8GLIB // Show SD percentage next to the progress bar - //#define DOGM_SD_PERCENT + #define DOGM_SD_PERCENT // Save many cycles by drawing a hollow frame or no frame on the Info Screen //#define XYZ_NO_FRAME @@ -1790,7 +1792,7 @@ * * Warning: Does not respect endstops! */ -//#define BABYSTEPPING +#define BABYSTEPPING #if ENABLED(BABYSTEPPING) //#define INTEGRATED_BABYSTEPPING // EXPERIMENTAL integration of babystepping into the Stepper ISR //#define BABYSTEP_WITHOUT_HOMING @@ -1801,7 +1803,7 @@ #define BABYSTEP_MULTIPLICATOR_Z 1 // (steps or mm) Steps or millimeter distance for each Z babystep #define BABYSTEP_MULTIPLICATOR_XY 1 // (steps or mm) Steps or millimeter distance for each XY babystep - //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. + #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. // Note: Extra time may be added to mitigate controller latency. @@ -1982,7 +1984,7 @@ // // G2/G3 Arc Support // -#define ARC_SUPPORT // Disable this feature to save ~3226 bytes +//#define ARC_SUPPORT // Disable this feature to save ~3226 bytes #if ENABLED(ARC_SUPPORT) #define MM_PER_ARC_SEGMENT 1 // (mm) Length (or minimum length) of each arc segment //#define ARC_SEGMENTS_PER_R 1 // Max segment length, MM_PER = Min @@ -3439,7 +3441,7 @@ /** * Disable all Volumetric extrusion options */ -//#define NO_VOLUMETRICS +#define NO_VOLUMETRICS #if DISABLED(NO_VOLUMETRICS) /** @@ -3471,7 +3473,7 @@ * - M206 and M428 are disabled. * - G92 will revert to its behavior from Marlin 1.0. */ -//#define NO_WORKSPACE_OFFSETS +#define NO_WORKSPACE_OFFSETS // Extra options for the M114 "Current Position" report //#define M114_DETAIL // Use 'M114` for details to check planner calculations diff --git a/config/examples/AnyCubic/Mega Zero/BigTreeTech SKR Mini MZ V1.0/Configuration.h b/config/examples/AnyCubic/Mega Zero/BigTreeTech SKR Mini MZ V1.0/Configuration.h index 78c2dc9160..4b3c20fbaa 100644 --- a/config/examples/AnyCubic/Mega Zero/BigTreeTech SKR Mini MZ V1.0/Configuration.h +++ b/config/examples/AnyCubic/Mega Zero/BigTreeTech SKR Mini MZ V1.0/Configuration.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "AnyCubic/Mega Zero/BigTreeTech SKR Mini MZ V1.0" + /** * Configuration.h * @@ -69,7 +71,7 @@ // @section info // Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes. +#define STRING_CONFIG_H_AUTHOR "(thisiskeithb, Anycubic Mega Zero)" // Who made the changes. //#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) /** @@ -87,10 +89,10 @@ #define SHOW_BOOTSCREEN // Show the bitmap in Marlin/_Bootscreen.h on startup. -//#define SHOW_CUSTOM_BOOTSCREEN +#define SHOW_CUSTOM_BOOTSCREEN // Show the bitmap in Marlin/_Statusscreen.h on the status screen. -//#define CUSTOM_STATUS_SCREEN_IMAGE +#define CUSTOM_STATUS_SCREEN_IMAGE // @section machine @@ -102,14 +104,14 @@ * * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] */ -#define SERIAL_PORT 0 +#define SERIAL_PORT 2 /** * Select a secondary serial port on the board to use for communication with the host. * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] */ -//#define SERIAL_PORT_2 -1 +#define SERIAL_PORT_2 -1 /** * Select a third serial port on the board to use for communication with the host. @@ -127,18 +129,18 @@ * * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ -#define BAUDRATE 250000 +#define BAUDRATE 115200 // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH // Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_RAMPS_14_EFB + #define MOTHERBOARD BOARD_BTT_SKR_MINI_MZ_V1_0 #endif // Name displayed in the LCD "Ready" message and Info menu -//#define CUSTOM_MACHINE_NAME "3D Printer" +#define CUSTOM_MACHINE_NAME "Mega Zero" // Printer's unique ID, used by some programs to differentiate between machines. // Choose your own or use a service like https://www.uuidgenerator.net/version4 @@ -472,15 +474,15 @@ // Above this temperature the heater will be switched off. // This can protect components from overheating, but NOT from shorts and failures. // (Use MINTEMP for thermistor short/failure protection.) -#define HEATER_0_MAXTEMP 275 -#define HEATER_1_MAXTEMP 275 -#define HEATER_2_MAXTEMP 275 -#define HEATER_3_MAXTEMP 275 -#define HEATER_4_MAXTEMP 275 -#define HEATER_5_MAXTEMP 275 -#define HEATER_6_MAXTEMP 275 -#define HEATER_7_MAXTEMP 275 -#define BED_MAXTEMP 150 +#define HEATER_0_MAXTEMP 260 +#define HEATER_1_MAXTEMP 260 +#define HEATER_2_MAXTEMP 260 +#define HEATER_3_MAXTEMP 260 +#define HEATER_4_MAXTEMP 260 +#define HEATER_5_MAXTEMP 260 +#define HEATER_6_MAXTEMP 260 +#define HEATER_7_MAXTEMP 260 +#define BED_MAXTEMP 125 #define CHAMBER_MAXTEMP 60 /** @@ -505,21 +507,21 @@ #define PID_K1 0.95 // Smoothing factor within any PID loop #if ENABLED(PIDTEMP) - //#define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) - //#define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) + #define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) + #define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) // Set/get with gcode: M301 E[extruder number, 0-2] #if ENABLED(PID_PARAMS_PER_HOTEND) // Specify between 1 and HOTENDS values per array. // If fewer than EXTRUDER values are provided, the last element will be repeated. - #define DEFAULT_Kp_LIST { 22.20, 22.20 } - #define DEFAULT_Ki_LIST { 1.08, 1.08 } - #define DEFAULT_Kd_LIST { 114.00, 114.00 } + #define DEFAULT_Kp_LIST { 17.72, 17.72 } + #define DEFAULT_Ki_LIST { 1.18, 1.18 } + #define DEFAULT_Kd_LIST { 66.76, 66.76 } #else - #define DEFAULT_Kp 22.20 - #define DEFAULT_Ki 1.08 - #define DEFAULT_Kd 114.00 + #define DEFAULT_Kp 17.72 + #define DEFAULT_Ki 1.18 + #define DEFAULT_Kd 66.76 #endif #endif // PIDTEMP @@ -743,15 +745,15 @@ * TMC5130, TMC5130_STANDALONE, TMC5160, TMC5160_STANDALONE * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'L6474', 'POWERSTEP01', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2160', 'TMC2160_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC2209', 'TMC2209_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE', 'TMC5160', 'TMC5160_STANDALONE'] */ -#define X_DRIVER_TYPE A4988 -#define Y_DRIVER_TYPE A4988 -#define Z_DRIVER_TYPE A4988 +#define X_DRIVER_TYPE TMC2209 +#define Y_DRIVER_TYPE TMC2209 +#define Z_DRIVER_TYPE TMC2209 //#define X2_DRIVER_TYPE A4988 //#define Y2_DRIVER_TYPE A4988 //#define Z2_DRIVER_TYPE A4988 //#define Z3_DRIVER_TYPE A4988 //#define Z4_DRIVER_TYPE A4988 -#define E0_DRIVER_TYPE A4988 +#define E0_DRIVER_TYPE TMC2209 //#define E1_DRIVER_TYPE A4988 //#define E2_DRIVER_TYPE A4988 //#define E3_DRIVER_TYPE A4988 @@ -806,14 +808,14 @@ * Override with M92 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 500 } +#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 385 } /** * Default Max Feed Rate (mm/s) * Override with M203 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 } +#define DEFAULT_MAX_FEEDRATE { 500, 500, 5, 25 } //#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 #if ENABLED(LIMITED_MAX_FR_EDITING) @@ -826,7 +828,7 @@ * Override with M201 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 } +#define DEFAULT_MAX_ACCELERATION { 500, 500, 100, 5000 } //#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 #if ENABLED(LIMITED_MAX_ACCEL_EDITING) @@ -841,9 +843,9 @@ * M204 R Retract Acceleration * M204 T Travel Acceleration */ -#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves +#define DEFAULT_ACCELERATION 500 // X, Y, Z and E acceleration for printing moves +#define DEFAULT_RETRACT_ACCELERATION 500 // E acceleration for retracts +#define DEFAULT_TRAVEL_ACCELERATION 500 // X, Y, Z acceleration for travel (non printing) moves /** * Default Jerk limits (mm/s) @@ -877,7 +879,7 @@ * https://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html */ #if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.013 // (mm) Distance from real junction edge + #define JUNCTION_DEVIATION_MM 0.08 // (mm) Distance from real junction edge #define JD_HANDLE_SMALL_SEGMENTS // Use curvature estimation instead of just the junction angle // for small segments (< 1mm) with large junction angles (> 135°). #endif @@ -890,7 +892,7 @@ * * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained */ -//#define S_CURVE_ACCELERATION +#define S_CURVE_ACCELERATION //=========================================================================== //============================= Z Probe Options ============================= @@ -1055,7 +1057,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +#define NOZZLE_TO_PROBE_OFFSET { -40, -10, 2 } // Most probes should stay away from the edges of the bed, but // with NOZZLE_AS_PROBE this can be negative for a wider probing area. @@ -1190,7 +1192,7 @@ // @section machine // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR false +#define INVERT_X_DIR true #define INVERT_Y_DIR true #define INVERT_Z_DIR false @@ -1232,16 +1234,16 @@ // @section machine // The size of the printable area -#define X_BED_SIZE 200 -#define Y_BED_SIZE 200 +#define X_BED_SIZE 220 +#define Y_BED_SIZE 220 // Travel limits (mm) after homing, corresponding to endstop positions. -#define X_MIN_POS 0 +#define X_MIN_POS -9 #define Y_MIN_POS 0 #define Z_MIN_POS 0 #define X_MAX_POS X_BED_SIZE #define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 200 +#define Z_MAX_POS 250 /** * Software Endstops @@ -1389,14 +1391,14 @@ //#define AUTO_BED_LEVELING_LINEAR //#define AUTO_BED_LEVELING_BILINEAR //#define AUTO_BED_LEVELING_UBL -//#define MESH_BED_LEVELING +#define MESH_BED_LEVELING /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable * leveling immediately after G28. */ -//#define RESTORE_LEVELING_AFTER_G28 +#define RESTORE_LEVELING_AFTER_G28 //#define ENABLE_LEVELING_AFTER_G28 /** @@ -1518,16 +1520,16 @@ * Add a bed leveling sub-menu for ABL or MBL. * Include a guided procedure if manual probing is enabled. */ -//#define LCD_BED_LEVELING +#define LCD_BED_LEVELING #if ENABLED(LCD_BED_LEVELING) #define MESH_EDIT_Z_STEP 0.025 // (mm) Step size while manually probing Z axis. #define LCD_PROBE_Z_RANGE 4 // (mm) Z Range centered on Z_MIN_POS for LCD Z adjustment - //#define MESH_EDIT_MENU // Add a menu to edit mesh points + #define MESH_EDIT_MENU // Add a menu to edit mesh points #endif // Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS +#define LEVEL_BED_CORNERS #if ENABLED(LEVEL_BED_CORNERS) #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets @@ -1672,7 +1674,7 @@ * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) */ -//#define EEPROM_SETTINGS // Persistent storage with M500 and M501 +#define EEPROM_SETTINGS // Persistent storage with M500 and M501 //#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. #define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load @@ -1706,13 +1708,13 @@ // Preheat Constants - Up to 5 are supported without changes // #define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 180 +#define PREHEAT_1_TEMP_HOTEND 190 #define PREHEAT_1_TEMP_BED 70 #define PREHEAT_1_TEMP_CHAMBER 35 #define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 -#define PREHEAT_2_LABEL "ABS" -#define PREHEAT_2_TEMP_HOTEND 240 +#define PREHEAT_2_LABEL "PETG" +#define PREHEAT_2_TEMP_HOTEND 230 #define PREHEAT_2_TEMP_BED 110 #define PREHEAT_2_TEMP_CHAMBER 35 #define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 @@ -1936,7 +1938,7 @@ * SD Card support is disabled by default. If your controller has an SD slot, * you must uncomment the following option or it won't work. */ -//#define SDSUPPORT +#define SDSUPPORT /** * SD CARD: ENABLE CRC @@ -2006,7 +2008,7 @@ // // Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. // -//#define INDIVIDUAL_AXIS_HOMING_MENU +#define INDIVIDUAL_AXIS_HOMING_MENU // // SPEAKER/BUZZER @@ -2023,8 +2025,8 @@ // Note: Test audio output with the G-Code: // M300 S P // -//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 -//#define LCD_FEEDBACK_FREQUENCY_HZ 5000 +#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 20 +#define LCD_FEEDBACK_FREQUENCY_HZ 1000 //============================================================================= //======================== LCD / Controller Selection ========================= @@ -2287,7 +2289,7 @@ // This is RAMPS-compatible using a single 10-pin connector. // (For CR-10 owners who want to replace the Melzi Creality board but retain the display) // -//#define CR10_STOCKDISPLAY +#define CR10_STOCKDISPLAY // // Ender-2 OEM display, a variant of the MKS_MINI_12864 diff --git a/config/examples/AnyCubic/Mega Zero/BigTreeTech SKR Mini MZ V1.0/Configuration_adv.h b/config/examples/AnyCubic/Mega Zero/BigTreeTech SKR Mini MZ V1.0/Configuration_adv.h index 5335fa012a..5d03b1a754 100644 --- a/config/examples/AnyCubic/Mega Zero/BigTreeTech SKR Mini MZ V1.0/Configuration_adv.h +++ b/config/examples/AnyCubic/Mega Zero/BigTreeTech SKR Mini MZ V1.0/Configuration_adv.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "AnyCubic/Mega Zero/BigTreeTech SKR Mini MZ V1.0" + /** * Configuration_adv.h * @@ -741,7 +743,7 @@ //#define HOMING_BACKOFF_POST_MM { 2, 2, 2 } // (mm) Backoff from endstops after homing -//#define QUICK_HOME // If G28 contains XY do a diagonal move first +#define QUICK_HOME // If G28 contains XY do a diagonal move first //#define HOME_Y_BEFORE_X // If G28 contains XY home Y before X //#define HOME_Z_FIRST // Home Z first. Requires a Z-MIN endstop (not a probe). //#define CODEPENDENT_XY_HOMING // If X/Y can't home without homing Y/X first @@ -1134,7 +1136,7 @@ // @section lcd #if EITHER(IS_ULTIPANEL, EXTENSIBLE_UI) - #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel + #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 10*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines #if IS_ULTIPANEL #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position" @@ -1175,13 +1177,13 @@ #endif // Include a page of printer information in the LCD Main Menu - //#define LCD_INFO_MENU + #define LCD_INFO_MENU #if ENABLED(LCD_INFO_MENU) //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages #endif // BACK menu items keep the highlight at the top - //#define TURBO_BACK_MENU_ITEM + #define TURBO_BACK_MENU_ITEM // Add a mute option to the LCD menu //#define SOUND_MENU_ITEM @@ -1229,23 +1231,23 @@ #endif // Scroll a longer status message into view - //#define STATUS_MESSAGE_SCROLLING + #define STATUS_MESSAGE_SCROLLING // On the Info Screen, display XY with one decimal place when possible //#define LCD_DECIMAL_SMALL_XY // Add an 'M73' G-code to set the current percentage - //#define LCD_SET_PROGRESS_MANUALLY + #define LCD_SET_PROGRESS_MANUALLY // Show the E position (filament used) during printing //#define LCD_SHOW_E_TOTAL #endif #if EITHER(SDSUPPORT, LCD_SET_PROGRESS_MANUALLY) && ANY(HAS_MARLINUI_U8GLIB, HAS_MARLINUI_HD44780, IS_TFTGLCD_PANEL, EXTENSIBLE_UI) - //#define SHOW_REMAINING_TIME // Display estimated time to completion + #define SHOW_REMAINING_TIME // Display estimated time to completion #if ENABLED(SHOW_REMAINING_TIME) - //#define USE_M73_REMAINING_TIME // Use remaining time from M73 command instead of estimation - //#define ROTATE_PROGRESS_DISPLAY // Display (P)rogress, (E)lapsed, and (R)emaining time + #define USE_M73_REMAINING_TIME // Use remaining time from M73 command instead of estimation + #define ROTATE_PROGRESS_DISPLAY // Display (P)rogress, (E)lapsed, and (R)emaining time #endif #if EITHER(HAS_MARLINUI_U8GLIB, EXTENSIBLE_UI) @@ -1384,7 +1386,7 @@ //#define LONG_FILENAME_HOST_SUPPORT // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES + #define SCROLL_LONG_FILENAMES // Leave the heaters on after Stop Print (not recommended!) //#define SD_ABORT_NO_COOLDOWN @@ -1512,7 +1514,7 @@ */ #if HAS_MARLINUI_U8GLIB // Show SD percentage next to the progress bar - //#define DOGM_SD_PERCENT + #define DOGM_SD_PERCENT // Save many cycles by drawing a hollow frame or no frame on the Info Screen //#define XYZ_NO_FRAME @@ -1790,7 +1792,7 @@ * * Warning: Does not respect endstops! */ -//#define BABYSTEPPING +#define BABYSTEPPING #if ENABLED(BABYSTEPPING) //#define INTEGRATED_BABYSTEPPING // EXPERIMENTAL integration of babystepping into the Stepper ISR //#define BABYSTEP_WITHOUT_HOMING @@ -1801,7 +1803,7 @@ #define BABYSTEP_MULTIPLICATOR_Z 1 // (steps or mm) Steps or millimeter distance for each Z babystep #define BABYSTEP_MULTIPLICATOR_XY 1 // (steps or mm) Steps or millimeter distance for each XY babystep - //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. + #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. // Note: Extra time may be added to mitigate controller latency. @@ -1982,7 +1984,7 @@ // // G2/G3 Arc Support // -#define ARC_SUPPORT // Disable this feature to save ~3226 bytes +//#define ARC_SUPPORT // Disable this feature to save ~3226 bytes #if ENABLED(ARC_SUPPORT) #define MM_PER_ARC_SEGMENT 1 // (mm) Length (or minimum length) of each arc segment //#define ARC_SEGMENTS_PER_R 1 // Max segment length, MM_PER = Min @@ -2670,15 +2672,15 @@ * Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers * on the same serial port, either here or in your board's pins file. */ - //#define X_SLAVE_ADDRESS 0 - //#define Y_SLAVE_ADDRESS 0 - //#define Z_SLAVE_ADDRESS 0 + #define X_SLAVE_ADDRESS 0 + #define Y_SLAVE_ADDRESS 2 + #define Z_SLAVE_ADDRESS 1 //#define X2_SLAVE_ADDRESS 0 //#define Y2_SLAVE_ADDRESS 0 //#define Z2_SLAVE_ADDRESS 0 //#define Z3_SLAVE_ADDRESS 0 //#define Z4_SLAVE_ADDRESS 0 - //#define E0_SLAVE_ADDRESS 0 + #define E0_SLAVE_ADDRESS 3 //#define E1_SLAVE_ADDRESS 0 //#define E2_SLAVE_ADDRESS 0 //#define E3_SLAVE_ADDRESS 0 diff --git a/config/examples/AnyCubic/i3 Mega/Configuration.h b/config/examples/AnyCubic/i3 Mega/Configuration.h index 78c2dc9160..6aed2e0b71 100644 --- a/config/examples/AnyCubic/i3 Mega/Configuration.h +++ b/config/examples/AnyCubic/i3 Mega/Configuration.h @@ -21,6 +21,11 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "AnyCubic/i3 Mega" + +//#define I3MEGA_HAS_BLTOUCH +//#define I3MEGA_HAS_TMC2208 + /** * Configuration.h * @@ -133,12 +138,16 @@ //#define BLUETOOTH // Choose the name from boards.h that matches your setup -#ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_RAMPS_14_EFB +#if TRIGORILLA_VERSION == 1 + #define MOTHERBOARD BOARD_TRIGORILLA_14_11 +#else + #define MOTHERBOARD BOARD_TRIGORILLA_14 #endif +#define ANYCUBIC_I3MEGA + // Name displayed in the LCD "Ready" message and Info menu -//#define CUSTOM_MACHINE_NAME "3D Printer" +#define CUSTOM_MACHINE_NAME "Anycubic i3" // Printer's unique ID, used by some programs to differentiate between machines. // Choose your own or use a service like https://www.uuidgenerator.net/version4 @@ -416,7 +425,7 @@ * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. */ -#define TEMP_SENSOR_0 1 +#define TEMP_SENSOR_0 5 #define TEMP_SENSOR_1 0 #define TEMP_SENSOR_2 0 #define TEMP_SENSOR_3 0 @@ -424,7 +433,7 @@ #define TEMP_SENSOR_5 0 #define TEMP_SENSOR_6 0 #define TEMP_SENSOR_7 0 -#define TEMP_SENSOR_BED 0 +#define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 #define TEMP_SENSOR_COOLER 0 @@ -510,16 +519,17 @@ //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) // Set/get with gcode: M301 E[extruder number, 0-2] + // i3 Mega stock v5 hotend, 40W heater cartridge (3.6Ω @ 22°C) #if ENABLED(PID_PARAMS_PER_HOTEND) // Specify between 1 and HOTENDS values per array. // If fewer than EXTRUDER values are provided, the last element will be repeated. - #define DEFAULT_Kp_LIST { 22.20, 22.20 } - #define DEFAULT_Ki_LIST { 1.08, 1.08 } - #define DEFAULT_Kd_LIST { 114.00, 114.00 } + #define DEFAULT_Kp_LIST { 15.94, 15.94 } + #define DEFAULT_Ki_LIST { 1.17, 1.17 } + #define DEFAULT_Kd_LIST { 54.19, 54.19 } #else - #define DEFAULT_Kp 22.20 - #define DEFAULT_Ki 1.08 - #define DEFAULT_Kd 114.00 + #define DEFAULT_Kp 15.94 + #define DEFAULT_Ki 1.17 + #define DEFAULT_Kd 54.19 #endif #endif // PIDTEMP @@ -540,7 +550,7 @@ * heater. If your configuration is significantly different than this and you don't understand * the issues involved, don't use bed PID until someone else verifies that your hardware works. */ -//#define PIDTEMPBED +#define PIDTEMPBED //#define BED_LIMIT_SWITCHING @@ -556,11 +566,10 @@ //#define MIN_BED_POWER 0 //#define PID_BED_DEBUG // Sends debug data to the serial port. - // 120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - // from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) - #define DEFAULT_bedKp 10.00 - #define DEFAULT_bedKi .023 - #define DEFAULT_bedKd 305.4 + // Anycubic i3 Mega Ultrabase (0.9Ω @ 22°C) + #define DEFAULT_bedKp 251.78 + #define DEFAULT_bedKi 49.57 + #define DEFAULT_bedKd 319.73 // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. #endif // PIDTEMPBED @@ -634,7 +643,7 @@ * Note: For Bowden Extruders make this large enough to allow load/unload. */ #define PREVENT_LENGTHY_EXTRUDE -#define EXTRUDE_MAXLENGTH 200 +#define EXTRUDE_MAXLENGTH 600 //=========================================================================== //======================== Thermal Runaway Protection ======================= @@ -686,7 +695,7 @@ #define USE_XMIN_PLUG #define USE_YMIN_PLUG #define USE_ZMIN_PLUG -//#define USE_XMAX_PLUG +#define USE_XMAX_PLUG // used as the second z stepper end limit switch //#define USE_YMAX_PLUG //#define USE_ZMAX_PLUG @@ -717,13 +726,13 @@ #endif // Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define X_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_PROBE_ENDSTOP_INVERTING false // Set to true to invert the logic of the probe. +#define X_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Y_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Z_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define X_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Y_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Z_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Z_MIN_PROBE_ENDSTOP_INVERTING true // Set to true to invert the logic of the probe. /** * Stepper Drivers @@ -743,22 +752,27 @@ * TMC5130, TMC5130_STANDALONE, TMC5160, TMC5160_STANDALONE * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'L6474', 'POWERSTEP01', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2160', 'TMC2160_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC2209', 'TMC2209_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE', 'TMC5160', 'TMC5160_STANDALONE'] */ -#define X_DRIVER_TYPE A4988 -#define Y_DRIVER_TYPE A4988 -#define Z_DRIVER_TYPE A4988 -//#define X2_DRIVER_TYPE A4988 -//#define Y2_DRIVER_TYPE A4988 -//#define Z2_DRIVER_TYPE A4988 -//#define Z3_DRIVER_TYPE A4988 -//#define Z4_DRIVER_TYPE A4988 -#define E0_DRIVER_TYPE A4988 -//#define E1_DRIVER_TYPE A4988 -//#define E2_DRIVER_TYPE A4988 -//#define E3_DRIVER_TYPE A4988 -//#define E4_DRIVER_TYPE A4988 -//#define E5_DRIVER_TYPE A4988 -//#define E6_DRIVER_TYPE A4988 -//#define E7_DRIVER_TYPE A4988 +#if ENABLED(I3MEGA_HAS_TMC2208) + #define ALL_DRIVERS_TYPE TMC2208_STANDALONE +#else + #define ALL_DRIVERS_TYPE A4988 +#endif +#define X_DRIVER_TYPE ALL_DRIVERS_TYPE +#define Y_DRIVER_TYPE ALL_DRIVERS_TYPE +#define Z_DRIVER_TYPE ALL_DRIVERS_TYPE +#define X2_DRIVER_TYPE ALL_DRIVERS_TYPE +#define Y2_DRIVER_TYPE ALL_DRIVERS_TYPE +#define Z2_DRIVER_TYPE ALL_DRIVERS_TYPE +//#define Z3_DRIVER_TYPE ALL_DRIVERS_TYPE +//#define Z4_DRIVER_TYPE ALL_DRIVERS_TYPE +#define E0_DRIVER_TYPE ALL_DRIVERS_TYPE +//#define E1_DRIVER_TYPE ALL_DRIVERS_TYPE +//#define E2_DRIVER_TYPE ALL_DRIVERS_TYPE +//#define E3_DRIVER_TYPE ALL_DRIVERS_TYPE +//#define E4_DRIVER_TYPE ALL_DRIVERS_TYPE +//#define E5_DRIVER_TYPE ALL_DRIVERS_TYPE +//#define E6_DRIVER_TYPE ALL_DRIVERS_TYPE +//#define E7_DRIVER_TYPE ALL_DRIVERS_TYPE // Enable this feature if all enabled endstop pins are interrupt-capable. // This will remove the need to poll the interrupt pins, saving many CPU cycles. @@ -806,14 +820,14 @@ * Override with M92 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 500 } +#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 96.2 } /** * Default Max Feed Rate (mm/s) * Override with M203 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 } +#define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 60 } //#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 #if ENABLED(LIMITED_MAX_FR_EDITING) @@ -826,7 +840,7 @@ * Override with M201 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 } +#define DEFAULT_MAX_ACCELERATION { 3000, 2000, 60, 10000 } //#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 #if ENABLED(LIMITED_MAX_ACCEL_EDITING) @@ -841,7 +855,7 @@ * M204 R Retract Acceleration * M204 T Travel Acceleration */ -#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves +#define DEFAULT_ACCELERATION 1500 // X, Y, Z and E acceleration for printing moves #define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts #define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves @@ -906,7 +920,7 @@ * The probe replaces the Z-MIN endstop and is used for Z homing. * (Automatically enables USE_PROBE_FOR_Z_HOMING.) */ -#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN +//#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN // Force the use of the probe for Z-axis homing //#define USE_PROBE_FOR_Z_HOMING @@ -940,7 +954,9 @@ * Use G29 repeatedly, adjusting the Z height at each point with movement commands * or (with LCD_BED_LEVELING) the LCD controller. */ -//#define PROBE_MANUALLY +#if DISABLED(I3MEGA_HAS_BLTOUCH) + #define PROBE_MANUALLY +#endif /** * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. @@ -963,7 +979,9 @@ /** * The BLTouch probe uses a Hall effect sensor and emulates a servo. */ -//#define BLTOUCH +#if ENABLED(I3MEGA_HAS_BLTOUCH) + #define BLTOUCH +#endif /** * Touch-MI Probe by hotends.fr @@ -1055,7 +1073,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +#define NOZZLE_TO_PROBE_OFFSET { 0, -23, -1.54 } // Most probes should stay away from the edges of the bed, but // with NOZZLE_AS_PROBE this can be negative for a wider probing area. @@ -1106,8 +1124,8 @@ * A total of 2 does fast/slow probes with a weighted average. * A total of 3 or more adds more slow probes, taking the average. */ -//#define MULTIPLE_PROBING 2 -//#define EXTRA_PROBING 1 +#define MULTIPLE_PROBING 2 +#define EXTRA_PROBING 1 /** * Z probes require clearance when deploying, stowing, and moving between @@ -1135,7 +1153,9 @@ #define Z_PROBE_OFFSET_RANGE_MAX 20 // Enable the M48 repeatability test to test probe accuracy -//#define Z_MIN_PROBE_REPEATABILITY_TEST +#if ENABLED(I3MEGA_HAS_BLTOUCH) + #define Z_MIN_PROBE_REPEATABILITY_TEST +#endif // Before deploy/stow pause for user confirmation //#define PAUSE_BEFORE_DEPLOY_STOW @@ -1190,9 +1210,9 @@ // @section machine // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR false -#define INVERT_Y_DIR true -#define INVERT_Z_DIR false +#define INVERT_X_DIR true // set to true for stock drivers or TMC2208 with reversed connectors +#define INVERT_Y_DIR false // set to false for stock drivers or TMC2208 with reversed connectors +#define INVERT_Z_DIR false // set to false for stock drivers or TMC2208 with reversed // @section extruder @@ -1232,16 +1252,16 @@ // @section machine // The size of the printable area -#define X_BED_SIZE 200 -#define Y_BED_SIZE 200 +#define X_BED_SIZE 210 +#define Y_BED_SIZE 210 // Travel limits (mm) after homing, corresponding to endstop positions. -#define X_MIN_POS 0 +#define X_MIN_POS -5 #define Y_MIN_POS 0 #define Z_MIN_POS 0 #define X_MAX_POS X_BED_SIZE #define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 200 +#define Z_MAX_POS 205 /** * Software Endstops @@ -1285,12 +1305,12 @@ * RAMPS-based boards use SERVO3_PIN for the first runout sensor. * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. */ -//#define FILAMENT_RUNOUT_SENSOR +#define FILAMENT_RUNOUT_SENSOR #if ENABLED(FILAMENT_RUNOUT_SENSOR) #define FIL_RUNOUT_ENABLED_DEFAULT true // Enable the sensor on startup. Override with M412 followed by M500. #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. - #define FIL_RUNOUT_STATE LOW // Pin state indicating that filament is NOT present. + #define FIL_RUNOUT_STATE HIGH // Pin state indicating that filament is NOT present. #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. //#define WATCH_ALL_RUNOUT_SENSORS // Execute runout script on any triggering sensor, not only for the active extruder. @@ -1387,9 +1407,13 @@ */ //#define AUTO_BED_LEVELING_3POINT //#define AUTO_BED_LEVELING_LINEAR -//#define AUTO_BED_LEVELING_BILINEAR +#if ENABLED(I3MEGA_HAS_BLTOUCH) + #define AUTO_BED_LEVELING_BILINEAR +#endif //#define AUTO_BED_LEVELING_UBL -//#define MESH_BED_LEVELING +#if DISABLED(I3MEGA_HAS_BLTOUCH) + #define MESH_BED_LEVELING +#endif /** * Normally G28 leaves leveling disabled on completion. Enable one of @@ -1438,7 +1462,7 @@ /** * Enable the G26 Mesh Validation Pattern tool. */ - //#define G26_MESH_VALIDATION + #define G26_MESH_VALIDATION #if ENABLED(G26_MESH_VALIDATION) #define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle. #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for G26. @@ -1454,7 +1478,7 @@ #if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR) // Set the number of grid points per dimension. - #define GRID_MAX_POINTS_X 3 + #define GRID_MAX_POINTS_X 5 #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X // Probe along the Y axis, advancing X after each column @@ -1507,7 +1531,7 @@ //=========================================================================== #define MESH_INSET 10 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 3 // Don't use more than 7 points per axis, implementation limited. + #define GRID_MAX_POINTS_X 5 // Don't use more than 7 points per axis, implementation limited. #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS @@ -1672,7 +1696,7 @@ * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) */ -//#define EEPROM_SETTINGS // Persistent storage with M500 and M501 +#define EEPROM_SETTINGS // Persistent storage with M500 and M501 //#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. #define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load @@ -1706,14 +1730,14 @@ // Preheat Constants - Up to 5 are supported without changes // #define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 180 -#define PREHEAT_1_TEMP_BED 70 +#define PREHEAT_1_TEMP_HOTEND 215 +#define PREHEAT_1_TEMP_BED 65 #define PREHEAT_1_TEMP_CHAMBER 35 #define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 #define PREHEAT_2_LABEL "ABS" -#define PREHEAT_2_TEMP_HOTEND 240 -#define PREHEAT_2_TEMP_BED 110 +#define PREHEAT_2_TEMP_HOTEND 235 +#define PREHEAT_2_TEMP_BED 85 #define PREHEAT_2_TEMP_CHAMBER 35 #define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 @@ -1728,7 +1752,7 @@ * P1 Raise the nozzle always to Z-park height. * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. */ -//#define NOZZLE_PARK_FEATURE +#define NOZZLE_PARK_FEATURE #if ENABLED(NOZZLE_PARK_FEATURE) // Specify a park position as { X, Y, Z_raise } @@ -1936,7 +1960,7 @@ * SD Card support is disabled by default. If your controller has an SD slot, * you must uncomment the following option or it won't work. */ -//#define SDSUPPORT +#define SDSUPPORT /** * SD CARD: ENABLE CRC @@ -2014,7 +2038,7 @@ // If you have a speaker that can produce tones, enable it here. // By default Marlin assumes you have a buzzer with a fixed frequency. // -//#define SPEAKER +#define SPEAKER // // The duration and frequency for the UI feedback sound. @@ -2410,11 +2434,11 @@ // // Touch-screen LCD for Anycubic printers // -//#define ANYCUBIC_LCD_I3MEGA +#define ANYCUBIC_LCD_I3MEGA //#define ANYCUBIC_LCD_CHIRON #if EITHER(ANYCUBIC_LCD_I3MEGA, ANYCUBIC_LCD_CHIRON) #define LCD_SERIAL_PORT 3 // Default is 3 for Anycubic - //#define ANYCUBIC_LCD_DEBUG + #define ANYCUBIC_LCD_DEBUG #endif // @@ -2429,7 +2453,7 @@ // Third-party or vendor-customized controller interfaces. // Sources should be installed in 'src/lcd/extui'. // -//#define EXTENSIBLE_UI +#define EXTENSIBLE_UI #if ENABLED(EXTENSIBLE_UI) //#define EXTUI_LOCAL_BEEPER // Enables use of local Beeper pin with external display @@ -2561,6 +2585,20 @@ */ //#define TFT_ROTATION TFT_NO_ROTATION +/** + * Select your version of the Trigorilla (RAMPS1.4) board here. + * + * 0 = Default Trigorilla + * 1 = Newer Trigorilla v1.1 (first seen late 2018) + * + * The only major difference is a slight change on the servo pin mapping. + * This setting only is relevant if you want to use BLtouch or similar + * mods to be used via servo pins. + * The new version is to be identified by a "TRIGORILLA1.1" lettering + * on the upper left of the PCB silkscreen. + */ +#define TRIGORILLA_VERSION 0 + //============================================================================= //============================ Other Controllers ============================ //============================================================================= diff --git a/config/examples/AnyCubic/i3 Mega/Configuration_adv.h b/config/examples/AnyCubic/i3 Mega/Configuration_adv.h index 5335fa012a..27ba179f87 100644 --- a/config/examples/AnyCubic/i3 Mega/Configuration_adv.h +++ b/config/examples/AnyCubic/i3 Mega/Configuration_adv.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "AnyCubic/i3 Mega" + /** * Configuration_adv.h * @@ -461,9 +463,9 @@ * The fan turns on automatically whenever any driver is enabled and turns * off (or reduces to idle speed) shortly after drivers are turned off. */ -//#define USE_CONTROLLER_FAN +#define USE_CONTROLLER_FAN #if ENABLED(USE_CONTROLLER_FAN) - //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan + #define CONTROLLER_FAN_PIN TG_FAN1_PIN // Set a custom pin for the controller fan //#define CONTROLLER_FAN_USE_Z_ONLY // With this option only the Z axis is considered //#define CONTROLLER_FAN_IGNORE_Z // Ignore Z stepper. Useful when stepper timeout is disabled. #define CONTROLLERFAN_SPEED_MIN 0 // (0-255) Minimum speed. (If set below this value the fan is turned off.) @@ -540,7 +542,7 @@ * Multiple extruders can be assigned to the same pin in which case * the fan will turn on when any selected extruder is above the threshold. */ -#define E0_AUTO_FAN_PIN -1 +#define E0_AUTO_FAN_PIN FAN2_PIN #define E1_AUTO_FAN_PIN -1 #define E2_AUTO_FAN_PIN -1 #define E3_AUTO_FAN_PIN -1 @@ -648,7 +650,7 @@ // // For Z set the number of stepper drivers // -#define NUM_Z_STEPPER_DRIVERS 1 // (1-4) Z options change based on how many +#define NUM_Z_STEPPER_DRIVERS 2 // (1-4) Z options change based on how many #if NUM_Z_STEPPER_DRIVERS > 1 // Enable if Z motor direction signals are the opposite of Z1 @@ -656,7 +658,7 @@ //#define INVERT_Z3_VS_Z_DIR //#define INVERT_Z4_VS_Z_DIR - //#define Z_MULTI_ENDSTOPS + #define Z_MULTI_ENDSTOPS #if ENABLED(Z_MULTI_ENDSTOPS) #define Z2_USE_ENDSTOP _XMAX_ #define Z2_ENDSTOP_ADJUSTMENT 0 @@ -1837,7 +1839,7 @@ * * See https://marlinfw.org/docs/features/lin_advance.html for full instructions. */ -//#define LIN_ADVANCE +#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) //#define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed @@ -2090,8 +2092,8 @@ // @section serial // The ASCII buffer for serial input -#define MAX_CMD_SIZE 96 -#define BUFSIZE 4 +#define MAX_CMD_SIZE 128 +#define BUFSIZE 8 // Transmission to Host Buffer Size // To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0. @@ -2100,13 +2102,13 @@ // For debug-echo: 128 bytes for the optimal speed. // Other output doesn't need to be that speedy. // :[0, 2, 4, 8, 16, 32, 64, 128, 256] -#define TX_BUFFER_SIZE 0 +#define TX_BUFFER_SIZE 4 // Host Receive Buffer Size // Without XON/XOFF flow control (see SERIAL_XON_XOFF below) 32 bytes should be enough. // To use flow control, set this buffer size to at least 1024 bytes. // :[0, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048] -//#define RX_BUFFER_SIZE 1024 +#define RX_BUFFER_SIZE 256 #if RX_BUFFER_SIZE >= 1024 // Enable to have the controller send XON/XOFF control characters to @@ -2141,7 +2143,7 @@ * Currently handles M108, M112, M410, M876 * NOTE: Not yet implemented for all platforms. */ -//#define EMERGENCY_PARSER +#define EMERGENCY_PARSER /** * Realtime Reporting (requires EMERGENCY_PARSER) @@ -2311,14 +2313,14 @@ * * Enable PARK_HEAD_ON_PAUSE to add the G-code M125 Pause and Park. */ -//#define ADVANCED_PAUSE_FEATURE +#define ADVANCED_PAUSE_FEATURE #if ENABLED(ADVANCED_PAUSE_FEATURE) - #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. + #define PAUSE_PARK_RETRACT_FEEDRATE 50 // (mm/s) Initial retract feedrate. #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. // This short retract is done immediately, before parking the nozzle. #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast. #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload. + #define FILAMENT_CHANGE_UNLOAD_LENGTH 555 // (mm) The length of filament for a complete unload. // For Bowden, the full length of the tube and nozzle. // For direct drive, the full length of the nozzle. // Set to 0 for manual unloading. @@ -2327,16 +2329,16 @@ // 0 to disable start loading and skip to fast load only #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast. #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle. + #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 538 // (mm) Load length of filament, from extruder gear to nozzle. // For Bowden, the full length of the tube and nozzle. // For direct drive, the full length of the nozzle. //#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted. #define ADVANCED_PAUSE_PURGE_FEEDRATE 3 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate. - #define ADVANCED_PAUSE_PURGE_LENGTH 50 // (mm) Length to extrude after loading. + #define ADVANCED_PAUSE_PURGE_LENGTH 60 // (mm) Length to extrude after loading. // Set to 0 for manual extrusion. // Filament can be extruded repeatedly from the Filament Change menu // until extrusion is consistent, and to purge old filament. - #define ADVANCED_PAUSE_RESUME_PRIME 0 // (mm) Extra distance to prime nozzle after returning from park. + #define ADVANCED_PAUSE_RESUME_PRIME 2 // (mm) Extra distance to prime nozzle after returning from park. //#define ADVANCED_PAUSE_FANS_PAUSE // Turn off print-cooling fans while the machine is paused. // Filament Unload does a Retract, Delay, and Purge first: @@ -2349,7 +2351,7 @@ #define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed. #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change. - //#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. + #define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. //#define HOME_BEFORE_FILAMENT_CHANGE // If needed, home before parking for filament change //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. @@ -3650,9 +3652,9 @@ * Host Prompt Support enables Marlin to use the host for user prompts so * filament runout and other processes can be managed from the host side. */ -//#define HOST_ACTION_COMMANDS +#define HOST_ACTION_COMMANDS #if ENABLED(HOST_ACTION_COMMANDS) - //#define HOST_PROMPT_SUPPORT + #define HOST_PROMPT_SUPPORT //#define HOST_START_MENU_ITEM // Add a menu item that tells the host to start #endif diff --git a/config/examples/AnyCubic/i3/Configuration.h b/config/examples/AnyCubic/i3/Configuration.h index 78c2dc9160..0c73624d7d 100644 --- a/config/examples/AnyCubic/i3/Configuration.h +++ b/config/examples/AnyCubic/i3/Configuration.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "AnyCubic/i3" + /** * Configuration.h * @@ -134,11 +136,11 @@ // Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_RAMPS_14_EFB + #define MOTHERBOARD BOARD_TRIGORILLA_14 #endif // Name displayed in the LCD "Ready" message and Info menu -//#define CUSTOM_MACHINE_NAME "3D Printer" +#define CUSTOM_MACHINE_NAME "Anycubic i3" // Printer's unique ID, used by some programs to differentiate between machines. // Choose your own or use a service like https://www.uuidgenerator.net/version4 @@ -424,7 +426,7 @@ #define TEMP_SENSOR_5 0 #define TEMP_SENSOR_6 0 #define TEMP_SENSOR_7 0 -#define TEMP_SENSOR_BED 0 +#define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 #define TEMP_SENSOR_COOLER 0 @@ -510,16 +512,17 @@ //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) // Set/get with gcode: M301 E[extruder number, 0-2] + // ANYCUBIC I3 240C and 8 cycles #if ENABLED(PID_PARAMS_PER_HOTEND) // Specify between 1 and HOTENDS values per array. // If fewer than EXTRUDER values are provided, the last element will be repeated. - #define DEFAULT_Kp_LIST { 22.20, 22.20 } - #define DEFAULT_Ki_LIST { 1.08, 1.08 } - #define DEFAULT_Kd_LIST { 114.00, 114.00 } + #define DEFAULT_Kp_LIST { 17.80, 17.80 } + #define DEFAULT_Ki_LIST { 0.84, 0.84 } + #define DEFAULT_Kd_LIST { 64.84, 64.84 } #else - #define DEFAULT_Kp 22.20 - #define DEFAULT_Ki 1.08 - #define DEFAULT_Kd 114.00 + #define DEFAULT_Kp 17.80 + #define DEFAULT_Ki 0.84 + #define DEFAULT_Kd 64.84 #endif #endif // PIDTEMP @@ -540,7 +543,7 @@ * heater. If your configuration is significantly different than this and you don't understand * the issues involved, don't use bed PID until someone else verifies that your hardware works. */ -//#define PIDTEMPBED +#define PIDTEMPBED //#define BED_LIMIT_SWITCHING @@ -556,11 +559,10 @@ //#define MIN_BED_POWER 0 //#define PID_BED_DEBUG // Sends debug data to the serial port. - // 120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - // from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) - #define DEFAULT_bedKp 10.00 - #define DEFAULT_bedKi .023 - #define DEFAULT_bedKd 305.4 + // Anycubic I3 with Ultrabase. 100C and 8 cycles + #define DEFAULT_bedKp 218.59 + #define DEFAULT_bedKi 43.04 + #define DEFAULT_bedKd 277.56 // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. #endif // PIDTEMPBED @@ -634,7 +636,7 @@ * Note: For Bowden Extruders make this large enough to allow load/unload. */ #define PREVENT_LENGTHY_EXTRUDE -#define EXTRUDE_MAXLENGTH 200 +#define EXTRUDE_MAXLENGTH 420 //=========================================================================== //======================== Thermal Runaway Protection ======================= @@ -717,13 +719,13 @@ #endif // Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define X_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_PROBE_ENDSTOP_INVERTING false // Set to true to invert the logic of the probe. +#define X_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Y_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Z_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define X_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Y_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Z_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Z_MIN_PROBE_ENDSTOP_INVERTING true // Set to true to invert the logic of the probe. /** * Stepper Drivers @@ -806,14 +808,14 @@ * Override with M92 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 500 } +#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 96.2 } /** * Default Max Feed Rate (mm/s) * Override with M203 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 } +#define DEFAULT_MAX_FEEDRATE { 500, 500, 6, 25 } //#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 #if ENABLED(LIMITED_MAX_FR_EDITING) @@ -826,7 +828,7 @@ * Override with M201 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 } +#define DEFAULT_MAX_ACCELERATION { 1500, 1500, 50, 8000 } //#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 #if ENABLED(LIMITED_MAX_ACCEL_EDITING) @@ -841,9 +843,9 @@ * M204 R Retract Acceleration * M204 T Travel Acceleration */ -#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves +#define DEFAULT_ACCELERATION 1000 // X, Y, Z and E acceleration for printing moves +#define DEFAULT_RETRACT_ACCELERATION 2000 // E acceleration for retracts +#define DEFAULT_TRAVEL_ACCELERATION 1000 // X, Y, Z acceleration for travel (non printing) moves /** * Default Jerk limits (mm/s) @@ -855,9 +857,9 @@ */ //#define CLASSIC_JERK #if ENABLED(CLASSIC_JERK) - #define DEFAULT_XJERK 10.0 - #define DEFAULT_YJERK 10.0 - #define DEFAULT_ZJERK 0.3 + #define DEFAULT_XJERK 5.0 + #define DEFAULT_YJERK 2.0 + #define DEFAULT_ZJERK 0.4 //#define TRAVEL_EXTRA_XYJERK 0.0 // Additional jerk allowance for all travel moves @@ -867,7 +869,7 @@ #endif #endif -#define DEFAULT_EJERK 5.0 // May be used by Linear Advance +#define DEFAULT_EJERK 2.0 // May be used by Linear Advance /** * Junction Deviation Factor @@ -877,7 +879,7 @@ * https://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html */ #if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.013 // (mm) Distance from real junction edge + #define JUNCTION_DEVIATION_MM 0.002 // (mm) Distance from real junction edge #define JD_HANDLE_SMALL_SEGMENTS // Use curvature estimation instead of just the junction angle // for small segments (< 1mm) with large junction angles (> 135°). #endif @@ -963,7 +965,7 @@ /** * The BLTouch probe uses a Hall effect sensor and emulates a servo. */ -//#define BLTOUCH +#define BLTOUCH /** * Touch-MI Probe by hotends.fr @@ -1055,7 +1057,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +#define NOZZLE_TO_PROBE_OFFSET { 75, 5, -2 } // Most probes should stay away from the edges of the bed, but // with NOZZLE_AS_PROBE this can be negative for a wider probing area. @@ -1185,14 +1187,14 @@ // @section extruder #define DISABLE_E false // Disable the extruder when not stepping -#define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled +#define DISABLE_INACTIVE_EXTRUDER true // Keep only the active extruder enabled // @section machine // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR false -#define INVERT_Y_DIR true -#define INVERT_Z_DIR false +#define INVERT_Y_DIR false +#define INVERT_Z_DIR true // @section extruder @@ -1232,16 +1234,16 @@ // @section machine // The size of the printable area -#define X_BED_SIZE 200 -#define Y_BED_SIZE 200 +#define X_BED_SIZE 210 +#define Y_BED_SIZE 210 // Travel limits (mm) after homing, corresponding to endstop positions. -#define X_MIN_POS 0 -#define Y_MIN_POS 0 +#define X_MIN_POS -10 +#define Y_MIN_POS -11 #define Z_MIN_POS 0 #define X_MAX_POS X_BED_SIZE #define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 200 +#define Z_MAX_POS 250 /** * Software Endstops @@ -1257,7 +1259,7 @@ #if ENABLED(MIN_SOFTWARE_ENDSTOPS) #define MIN_SOFTWARE_ENDSTOP_X #define MIN_SOFTWARE_ENDSTOP_Y - #define MIN_SOFTWARE_ENDSTOP_Z + //#define MIN_SOFTWARE_ENDSTOP_Z #endif // Max software endstops constrain movement within maximum coordinate bounds @@ -1387,7 +1389,7 @@ */ //#define AUTO_BED_LEVELING_3POINT //#define AUTO_BED_LEVELING_LINEAR -//#define AUTO_BED_LEVELING_BILINEAR +#define AUTO_BED_LEVELING_BILINEAR //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING @@ -1587,7 +1589,7 @@ // - Move the Z probe (or nozzle) to a defined XY point before Z Homing. // - Prevent Z homing when the Z probe is outside bed area. // -//#define Z_SAFE_HOMING +#define Z_SAFE_HOMING #if ENABLED(Z_SAFE_HOMING) #define Z_SAFE_HOMING_X_POINT X_CENTER // X point for Z homing @@ -1672,7 +1674,7 @@ * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) */ -//#define EEPROM_SETTINGS // Persistent storage with M500 and M501 +#define EEPROM_SETTINGS // Persistent storage with M500 and M501 //#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. #define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load @@ -1706,16 +1708,16 @@ // Preheat Constants - Up to 5 are supported without changes // #define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 180 -#define PREHEAT_1_TEMP_BED 70 +#define PREHEAT_1_TEMP_HOTEND 200 +#define PREHEAT_1_TEMP_BED 65 #define PREHEAT_1_TEMP_CHAMBER 35 -#define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 +#define PREHEAT_1_FAN_SPEED 255 // Value from 0 to 255 #define PREHEAT_2_LABEL "ABS" #define PREHEAT_2_TEMP_HOTEND 240 -#define PREHEAT_2_TEMP_BED 110 +#define PREHEAT_2_TEMP_BED 95 #define PREHEAT_2_TEMP_CHAMBER 35 -#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 +#define PREHEAT_2_FAN_SPEED 255 // Value from 0 to 255 /** * Nozzle Park @@ -1921,7 +1923,7 @@ * * :['JAPANESE', 'WESTERN', 'CYRILLIC'] */ -#define DISPLAY_CHARSET_HD44780 JAPANESE +#define DISPLAY_CHARSET_HD44780 WESTERN /** * Info Screen Style (0:Classic, 1:Průša) @@ -1936,7 +1938,7 @@ * SD Card support is disabled by default. If your controller has an SD slot, * you must uncomment the following option or it won't work. */ -//#define SDSUPPORT +#define SDSUPPORT /** * SD CARD: ENABLE CRC @@ -1983,7 +1985,7 @@ // // Set this option if CLOCKWISE causes values to DECREASE // -//#define REVERSE_ENCODER_DIRECTION +#define REVERSE_ENCODER_DIRECTION // // This option reverses the encoder direction for navigating LCD menus. @@ -2037,7 +2039,7 @@ // // Note: Usually sold with a white PCB. // -//#define REPRAP_DISCOUNT_SMART_CONTROLLER +#define REPRAP_DISCOUNT_SMART_CONTROLLER // // GT2560 (YHCB2004) LCD Display @@ -2731,7 +2733,7 @@ * Set this manually if there are extra servos needing manual control. * Set to 0 to turn off servo support. */ -//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command +#define NUM_SERVOS 1 // Servo index starts with 0 for M280 command // (ms) Delay before the next move will start, to give the servo time to reach its target angle. // 300ms is a good value but you can try less delay. diff --git a/config/examples/AnyCubic/i3/Configuration_adv.h b/config/examples/AnyCubic/i3/Configuration_adv.h index 5335fa012a..147441c72d 100644 --- a/config/examples/AnyCubic/i3/Configuration_adv.h +++ b/config/examples/AnyCubic/i3/Configuration_adv.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "AnyCubic/i3" + /** * Configuration_adv.h * @@ -461,9 +463,9 @@ * The fan turns on automatically whenever any driver is enabled and turns * off (or reduces to idle speed) shortly after drivers are turned off. */ -//#define USE_CONTROLLER_FAN +#define USE_CONTROLLER_FAN #if ENABLED(USE_CONTROLLER_FAN) - //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan + #define CONTROLLER_FAN_PIN 7 // Set a custom pin for the controller fan //#define CONTROLLER_FAN_USE_Z_ONLY // With this option only the Z axis is considered //#define CONTROLLER_FAN_IGNORE_Z // Ignore Z stepper. Useful when stepper timeout is disabled. #define CONTROLLERFAN_SPEED_MIN 0 // (0-255) Minimum speed. (If set below this value the fan is turned off.) @@ -540,7 +542,7 @@ * Multiple extruders can be assigned to the same pin in which case * the fan will turn on when any selected extruder is above the threshold. */ -#define E0_AUTO_FAN_PIN -1 +#define E0_AUTO_FAN_PIN TG_FAN2_PIN #define E1_AUTO_FAN_PIN -1 #define E2_AUTO_FAN_PIN -1 #define E3_AUTO_FAN_PIN -1 @@ -867,7 +869,7 @@ // On a 300mm bed a 5% grade would give a misalignment of ~1.5cm #define G34_MAX_GRADE 5 // (%) Maximum incline that G34 will handle - #define Z_STEPPER_ALIGN_ITERATIONS 5 // Number of iterations to apply during alignment + #define Z_STEPPER_ALIGN_ITERATIONS 3 // Number of iterations to apply during alignment #define Z_STEPPER_ALIGN_ACC 0.02 // Stop iterating early if the accuracy is better than this #define RESTORE_LEVELING_AFTER_G34 // Restore leveling after G34 is done? // After G34, re-home Z (G28 Z) or just calculate it from the last probe heights? diff --git a/config/examples/ArmEd/Configuration.h b/config/examples/ArmEd/Configuration.h index 78c2dc9160..697f46ad4f 100644 --- a/config/examples/ArmEd/Configuration.h +++ b/config/examples/ArmEd/Configuration.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "ArmEd" + /** * Configuration.h * @@ -102,14 +104,14 @@ * * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] */ -#define SERIAL_PORT 0 +#define SERIAL_PORT -1 /** * Select a secondary serial port on the board to use for communication with the host. * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] */ -//#define SERIAL_PORT_2 -1 +//#define SERIAL_PORT_2 3 /** * Select a third serial port on the board to use for communication with the host. @@ -134,7 +136,7 @@ // Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_RAMPS_14_EFB + #define MOTHERBOARD BOARD_ARMED #endif // Name displayed in the LCD "Ready" message and Info menu @@ -416,7 +418,7 @@ * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. */ -#define TEMP_SENSOR_0 1 +#define TEMP_SENSOR_0 5 #define TEMP_SENSOR_1 0 #define TEMP_SENSOR_2 0 #define TEMP_SENSOR_3 0 @@ -424,7 +426,7 @@ #define TEMP_SENSOR_5 0 #define TEMP_SENSOR_6 0 #define TEMP_SENSOR_7 0 -#define TEMP_SENSOR_BED 0 +#define TEMP_SENSOR_BED 13 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 #define TEMP_SENSOR_COOLER 0 @@ -510,16 +512,17 @@ //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) // Set/get with gcode: M301 E[extruder number, 0-2] + // Armed #if ENABLED(PID_PARAMS_PER_HOTEND) // Specify between 1 and HOTENDS values per array. // If fewer than EXTRUDER values are provided, the last element will be repeated. - #define DEFAULT_Kp_LIST { 22.20, 22.20 } - #define DEFAULT_Ki_LIST { 1.08, 1.08 } - #define DEFAULT_Kd_LIST { 114.00, 114.00 } + #define DEFAULT_Kp_LIST { 23.41, 23.41 } + #define DEFAULT_Ki_LIST { 2.57, 2.57 } + #define DEFAULT_Kd_LIST { 53.37, 53.37 } #else - #define DEFAULT_Kp 22.20 - #define DEFAULT_Ki 1.08 - #define DEFAULT_Kd 114.00 + #define DEFAULT_Kp 23.41 + #define DEFAULT_Ki 2.57 + #define DEFAULT_Kd 53.37 #endif #endif // PIDTEMP @@ -558,9 +561,9 @@ // 120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) // from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) - #define DEFAULT_bedKp 10.00 - #define DEFAULT_bedKi .023 - #define DEFAULT_bedKd 305.4 + #define DEFAULT_bedKp 144.87 + #define DEFAULT_bedKi 27.00 + #define DEFAULT_bedKd 194.30 // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. #endif // PIDTEMPBED @@ -806,14 +809,14 @@ * Override with M92 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 500 } +#define DEFAULT_AXIS_STEPS_PER_UNIT { 100, 100, 400, 156.84 } /** * Default Max Feed Rate (mm/s) * Override with M203 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 } +#define DEFAULT_MAX_FEEDRATE { 300, 300, 20, 120 } //#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 #if ENABLED(LIMITED_MAX_FR_EDITING) @@ -826,7 +829,7 @@ * Override with M201 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 } +#define DEFAULT_MAX_ACCELERATION { 1000, 1000, 1000, 5000 } //#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 #if ENABLED(LIMITED_MAX_ACCEL_EDITING) @@ -841,9 +844,9 @@ * M204 R Retract Acceleration * M204 T Travel Acceleration */ -#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves +#define DEFAULT_ACCELERATION 1000 // X, Y, Z and E acceleration for printing moves +#define DEFAULT_RETRACT_ACCELERATION 1000 // E acceleration for retracts +#define DEFAULT_TRAVEL_ACCELERATION 1000 // X, Y, Z acceleration for travel (non printing) moves /** * Default Jerk limits (mm/s) @@ -855,9 +858,9 @@ */ //#define CLASSIC_JERK #if ENABLED(CLASSIC_JERK) - #define DEFAULT_XJERK 10.0 - #define DEFAULT_YJERK 10.0 - #define DEFAULT_ZJERK 0.3 + #define DEFAULT_XJERK 8.0 + #define DEFAULT_YJERK 8.0 + #define DEFAULT_ZJERK 0.4 //#define TRAVEL_EXTRA_XYJERK 0.0 // Additional jerk allowance for all travel moves @@ -867,7 +870,7 @@ #endif #endif -#define DEFAULT_EJERK 5.0 // May be used by Linear Advance +#define DEFAULT_EJERK 1.5 // May be used by Linear Advance /** * Junction Deviation Factor @@ -877,7 +880,7 @@ * https://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html */ #if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.013 // (mm) Distance from real junction edge + #define JUNCTION_DEVIATION_MM 0.026 // (mm) Distance from real junction edge #define JD_HANDLE_SMALL_SEGMENTS // Use curvature estimation instead of just the junction angle // for small segments (< 1mm) with large junction angles (> 135°). #endif diff --git a/config/examples/ArmEd/Configuration_adv.h b/config/examples/ArmEd/Configuration_adv.h index 5335fa012a..c7e7c584e2 100644 --- a/config/examples/ArmEd/Configuration_adv.h +++ b/config/examples/ArmEd/Configuration_adv.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "ArmEd" + /** * Configuration_adv.h * @@ -113,6 +115,10 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#define HEATER_BED_INVERTING true +#define HEATER_0_INVERTING true +#define HEATER_1_INVERTING true + #if TEMP_SENSOR_COOLER == 1000 #define COOLER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor #define COOLER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C @@ -867,7 +873,7 @@ // On a 300mm bed a 5% grade would give a misalignment of ~1.5cm #define G34_MAX_GRADE 5 // (%) Maximum incline that G34 will handle - #define Z_STEPPER_ALIGN_ITERATIONS 5 // Number of iterations to apply during alignment + #define Z_STEPPER_ALIGN_ITERATIONS 3 // Number of iterations to apply during alignment #define Z_STEPPER_ALIGN_ACC 0.02 // Stop iterating early if the accuracy is better than this #define RESTORE_LEVELING_AFTER_G34 // Restore leveling after G34 is done? // After G34, re-home Z (G28 Z) or just calculate it from the last probe heights? diff --git a/config/examples/Artillery/Genius/Configuration.h b/config/examples/Artillery/Genius/Configuration.h index 78c2dc9160..09fbe8a1b4 100644 --- a/config/examples/Artillery/Genius/Configuration.h +++ b/config/examples/Artillery/Genius/Configuration.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Artillery/Genius" + /** * Configuration.h * @@ -69,7 +71,7 @@ // @section info // Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes. +#define STRING_CONFIG_H_AUTHOR "(thisiskeithb, Genius)" // Who made the changes. //#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) /** @@ -134,11 +136,11 @@ // Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_RAMPS_14_EFB + #define MOTHERBOARD BOARD_MKS_GEN_L #endif // Name displayed in the LCD "Ready" message and Info menu -//#define CUSTOM_MACHINE_NAME "3D Printer" +#define CUSTOM_MACHINE_NAME "Genius" // Printer's unique ID, used by some programs to differentiate between machines. // Choose your own or use a service like https://www.uuidgenerator.net/version4 @@ -424,7 +426,7 @@ #define TEMP_SENSOR_5 0 #define TEMP_SENSOR_6 0 #define TEMP_SENSOR_7 0 -#define TEMP_SENSOR_BED 0 +#define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 #define TEMP_SENSOR_COOLER 0 @@ -446,7 +448,7 @@ #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 #define TEMP_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target +#define TEMP_HYSTERESIS 5 // (°C) Temperature proximity considered "close enough" to the target #define TEMP_BED_RESIDENCY_TIME 10 // (seconds) Time to wait for bed to "settle" in M190 #define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer @@ -510,16 +512,17 @@ //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) // Set/get with gcode: M301 E[extruder number, 0-2] + // Genius #if ENABLED(PID_PARAMS_PER_HOTEND) // Specify between 1 and HOTENDS values per array. // If fewer than EXTRUDER values are provided, the last element will be repeated. - #define DEFAULT_Kp_LIST { 22.20, 22.20 } - #define DEFAULT_Ki_LIST { 1.08, 1.08 } - #define DEFAULT_Kd_LIST { 114.00, 114.00 } + #define DEFAULT_Kp_LIST { 9.31, 9.31 } + #define DEFAULT_Ki_LIST { 0.57, 0.57 } + #define DEFAULT_Kd_LIST { 37.76, 37.76 } #else - #define DEFAULT_Kp 22.20 - #define DEFAULT_Ki 1.08 - #define DEFAULT_Kd 114.00 + #define DEFAULT_Kp 9.31 + #define DEFAULT_Ki 0.57 + #define DEFAULT_Kd 37.76 #endif #endif // PIDTEMP @@ -540,7 +543,7 @@ * heater. If your configuration is significantly different than this and you don't understand * the issues involved, don't use bed PID until someone else verifies that your hardware works. */ -//#define PIDTEMPBED +#define PIDTEMPBED //#define BED_LIMIT_SWITCHING @@ -556,11 +559,10 @@ //#define MIN_BED_POWER 0 //#define PID_BED_DEBUG // Sends debug data to the serial port. - // 120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - // from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) - #define DEFAULT_bedKp 10.00 - #define DEFAULT_bedKi .023 - #define DEFAULT_bedKd 305.4 + // Genius + #define DEFAULT_bedKp 92.46 + #define DEFAULT_bedKi 16.12 + #define DEFAULT_bedKd 132.55 // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. #endif // PIDTEMPBED @@ -717,9 +719,9 @@ #endif // Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. +#define X_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Y_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Z_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. #define X_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. #define Y_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. #define Z_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. @@ -743,15 +745,15 @@ * TMC5130, TMC5130_STANDALONE, TMC5160, TMC5160_STANDALONE * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'L6474', 'POWERSTEP01', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2160', 'TMC2160_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC2209', 'TMC2209_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE', 'TMC5160', 'TMC5160_STANDALONE'] */ -#define X_DRIVER_TYPE A4988 -#define Y_DRIVER_TYPE A4988 -#define Z_DRIVER_TYPE A4988 +#define X_DRIVER_TYPE TMC2100 +#define Y_DRIVER_TYPE TMC2100 +#define Z_DRIVER_TYPE TMC2100 //#define X2_DRIVER_TYPE A4988 //#define Y2_DRIVER_TYPE A4988 -//#define Z2_DRIVER_TYPE A4988 +#define Z2_DRIVER_TYPE TMC2100 //#define Z3_DRIVER_TYPE A4988 //#define Z4_DRIVER_TYPE A4988 -#define E0_DRIVER_TYPE A4988 +#define E0_DRIVER_TYPE TMC2100 //#define E1_DRIVER_TYPE A4988 //#define E2_DRIVER_TYPE A4988 //#define E3_DRIVER_TYPE A4988 @@ -776,7 +778,7 @@ * * :[2,3,4,5,6,7] */ -//#define ENDSTOP_NOISE_THRESHOLD 2 +#define ENDSTOP_NOISE_THRESHOLD 2 // Check for stuck or disconnected endstops during homing moves. //#define DETECT_BROKEN_ENDSTOP @@ -806,14 +808,14 @@ * Override with M92 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 500 } +#define DEFAULT_AXIS_STEPS_PER_UNIT { 80.121, 80.121, 399.778, 445 } /** * Default Max Feed Rate (mm/s) * Override with M203 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 } +#define DEFAULT_MAX_FEEDRATE { 300, 300, 50, 40 } //#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 #if ENABLED(LIMITED_MAX_FR_EDITING) @@ -826,7 +828,7 @@ * Override with M201 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 } +#define DEFAULT_MAX_ACCELERATION { 2000, 2000, 100, 10000 } //#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 #if ENABLED(LIMITED_MAX_ACCEL_EDITING) @@ -841,9 +843,9 @@ * M204 R Retract Acceleration * M204 T Travel Acceleration */ -#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves +#define DEFAULT_ACCELERATION 800 // X, Y, Z and E acceleration for printing moves +#define DEFAULT_RETRACT_ACCELERATION 10000 // E acceleration for retracts +#define DEFAULT_TRAVEL_ACCELERATION 2000 // X, Y, Z acceleration for travel (non printing) moves /** * Default Jerk limits (mm/s) @@ -855,8 +857,8 @@ */ //#define CLASSIC_JERK #if ENABLED(CLASSIC_JERK) - #define DEFAULT_XJERK 10.0 - #define DEFAULT_YJERK 10.0 + #define DEFAULT_XJERK 8.0 + #define DEFAULT_YJERK 8.0 #define DEFAULT_ZJERK 0.3 //#define TRAVEL_EXTRA_XYJERK 0.0 // Additional jerk allowance for all travel moves @@ -877,7 +879,7 @@ * https://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html */ #if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.013 // (mm) Distance from real junction edge + #define JUNCTION_DEVIATION_MM 0.032 // (mm) Distance from real junction edge #define JD_HANDLE_SMALL_SEGMENTS // Use curvature estimation instead of just the junction angle // for small segments (< 1mm) with large junction angles (> 135°). #endif @@ -890,7 +892,7 @@ * * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained */ -//#define S_CURVE_ACCELERATION +#define S_CURVE_ACCELERATION //=========================================================================== //============================= Z Probe Options ============================= @@ -1065,7 +1067,7 @@ #define XY_PROBE_FEEDRATE (133*60) // Feedrate (mm/min) for the first approach when double-probing (MULTIPLE_PROBING == 2) -#define Z_PROBE_FEEDRATE_FAST (4*60) +#define Z_PROBE_FEEDRATE_FAST (20*60) // Feedrate (mm/min) for the "accurate" probe of each point #define Z_PROBE_FEEDRATE_SLOW (Z_PROBE_FEEDRATE_FAST / 2) @@ -1191,8 +1193,8 @@ // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR false -#define INVERT_Y_DIR true -#define INVERT_Z_DIR false +#define INVERT_Y_DIR false +#define INVERT_Z_DIR true // @section extruder @@ -1232,16 +1234,16 @@ // @section machine // The size of the printable area -#define X_BED_SIZE 200 -#define Y_BED_SIZE 200 +#define X_BED_SIZE 220 +#define Y_BED_SIZE 230 // Travel limits (mm) after homing, corresponding to endstop positions. -#define X_MIN_POS 0 -#define Y_MIN_POS 0 +#define X_MIN_POS -2 +#define Y_MIN_POS -5 #define Z_MIN_POS 0 #define X_MAX_POS X_BED_SIZE #define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 200 +#define Z_MAX_POS 250 /** * Software Endstops @@ -1595,7 +1597,7 @@ #endif // Homing speeds (mm/min) -#define HOMING_FEEDRATE_MM_M { (50*60), (50*60), (4*60) } +#define HOMING_FEEDRATE_MM_M { (80*60), (80*60), (20*60) } // Validate that endstops are triggered on homing moves #define VALIDATE_HOMING_ENDSTOPS @@ -1672,12 +1674,12 @@ * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) */ -//#define EEPROM_SETTINGS // Persistent storage with M500 and M501 +#define EEPROM_SETTINGS // Persistent storage with M500 and M501 //#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. #define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load #if ENABLED(EEPROM_SETTINGS) - //#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. + #define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. #endif // @@ -2671,14 +2673,14 @@ * * LED Type. Enable only one of the following two options. */ -//#define RGB_LED +#define RGB_LED //#define RGBW_LED #if EITHER(RGB_LED, RGBW_LED) - //#define RGB_LED_R_PIN 34 - //#define RGB_LED_G_PIN 43 - //#define RGB_LED_B_PIN 35 - //#define RGB_LED_W_PIN -1 + #define RGB_LED_R_PIN 5 + #define RGB_LED_G_PIN 4 + #define RGB_LED_B_PIN 6 + #define RGB_LED_W_PIN -1 #endif // Support for Adafruit NeoPixel LED driver diff --git a/config/examples/Artillery/Genius/Configuration_adv.h b/config/examples/Artillery/Genius/Configuration_adv.h index 5335fa012a..bb1b5f81ba 100644 --- a/config/examples/Artillery/Genius/Configuration_adv.h +++ b/config/examples/Artillery/Genius/Configuration_adv.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Artillery/Genius" + /** * Configuration_adv.h * @@ -540,7 +542,7 @@ * Multiple extruders can be assigned to the same pin in which case * the fan will turn on when any selected extruder is above the threshold. */ -#define E0_AUTO_FAN_PIN -1 +#define E0_AUTO_FAN_PIN 7 #define E1_AUTO_FAN_PIN -1 #define E2_AUTO_FAN_PIN -1 #define E3_AUTO_FAN_PIN -1 @@ -648,7 +650,7 @@ // // For Z set the number of stepper drivers // -#define NUM_Z_STEPPER_DRIVERS 1 // (1-4) Z options change based on how many +#define NUM_Z_STEPPER_DRIVERS 2 // (1-4) Z options change based on how many #if NUM_Z_STEPPER_DRIVERS > 1 // Enable if Z motor direction signals are the opposite of Z1 @@ -741,7 +743,7 @@ //#define HOMING_BACKOFF_POST_MM { 2, 2, 2 } // (mm) Backoff from endstops after homing -//#define QUICK_HOME // If G28 contains XY do a diagonal move first +#define QUICK_HOME // If G28 contains XY do a diagonal move first //#define HOME_Y_BEFORE_X // If G28 contains XY home Y before X //#define HOME_Z_FIRST // Home Z first. Requires a Z-MIN endstop (not a probe). //#define CODEPENDENT_XY_HOMING // If X/Y can't home without homing Y/X first @@ -867,7 +869,7 @@ // On a 300mm bed a 5% grade would give a misalignment of ~1.5cm #define G34_MAX_GRADE 5 // (%) Maximum incline that G34 will handle - #define Z_STEPPER_ALIGN_ITERATIONS 5 // Number of iterations to apply during alignment + #define Z_STEPPER_ALIGN_ITERATIONS 3 // Number of iterations to apply during alignment #define Z_STEPPER_ALIGN_ACC 0.02 // Stop iterating early if the accuracy is better than this #define RESTORE_LEVELING_AFTER_G34 // Restore leveling after G34 is done? // After G34, re-home Z (G28 Z) or just calculate it from the last probe heights? @@ -1059,7 +1061,7 @@ * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the * lowest stepping frequencies. */ -//#define ADAPTIVE_STEP_SMOOTHING +#define ADAPTIVE_STEP_SMOOTHING /** * Custom Microstepping @@ -1790,11 +1792,11 @@ * * Warning: Does not respect endstops! */ -//#define BABYSTEPPING +#define BABYSTEPPING #if ENABLED(BABYSTEPPING) //#define INTEGRATED_BABYSTEPPING // EXPERIMENTAL integration of babystepping into the Stepper ISR //#define BABYSTEP_WITHOUT_HOMING - //#define BABYSTEP_ALWAYS_AVAILABLE // Allow babystepping at all times (not just during movement). + #define BABYSTEP_ALWAYS_AVAILABLE // Allow babystepping at all times (not just during movement). //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way //#define BABYSTEP_MILLIMETER_UNITS // Specify BABYSTEP_MULTIPLICATOR_(XY|Z) in mm instead of micro-steps @@ -2719,7 +2721,7 @@ * Define your own with: * { , , hysteresis_start[1..8] } */ - #define CHOPPER_TIMING CHOPPER_DEFAULT_12V // All axes (override below) + #define CHOPPER_TIMING CHOPPER_DEFAULT_24V // All axes (override below) //#define CHOPPER_TIMING_X CHOPPER_TIMING // For X Axes (override below) //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X //#define CHOPPER_TIMING_Y CHOPPER_TIMING // For Y Axes (override below) diff --git a/config/examples/Artillery/Sidewinder X1/Configuration.h b/config/examples/Artillery/Sidewinder X1/Configuration.h index 78c2dc9160..a19c8ef29b 100644 --- a/config/examples/Artillery/Sidewinder X1/Configuration.h +++ b/config/examples/Artillery/Sidewinder X1/Configuration.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Artillery/Sidewinder X1" + /** * Configuration.h * @@ -69,7 +71,7 @@ // @section info // Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes. +#define STRING_CONFIG_H_AUTHOR "(thisiskeithb, Sidewinder X1)" // Who made the changes. //#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) /** @@ -134,11 +136,11 @@ // Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_RAMPS_14_EFB + #define MOTHERBOARD BOARD_MKS_GEN_L #endif // Name displayed in the LCD "Ready" message and Info menu -//#define CUSTOM_MACHINE_NAME "3D Printer" +#define CUSTOM_MACHINE_NAME "Sidewinder X1" // Printer's unique ID, used by some programs to differentiate between machines. // Choose your own or use a service like https://www.uuidgenerator.net/version4 @@ -424,7 +426,7 @@ #define TEMP_SENSOR_5 0 #define TEMP_SENSOR_6 0 #define TEMP_SENSOR_7 0 -#define TEMP_SENSOR_BED 0 +#define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 #define TEMP_SENSOR_COOLER 0 @@ -510,16 +512,17 @@ //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) // Set/get with gcode: M301 E[extruder number, 0-2] + // Sidewinder X1 #if ENABLED(PID_PARAMS_PER_HOTEND) // Specify between 1 and HOTENDS values per array. // If fewer than EXTRUDER values are provided, the last element will be repeated. - #define DEFAULT_Kp_LIST { 22.20, 22.20 } - #define DEFAULT_Ki_LIST { 1.08, 1.08 } - #define DEFAULT_Kd_LIST { 114.00, 114.00 } + #define DEFAULT_Kp_LIST { 14.58, 14.58 } + #define DEFAULT_Ki_LIST { 1.14, 1.14 } + #define DEFAULT_Kd_LIST { 46.57, 46.57 } #else - #define DEFAULT_Kp 22.20 - #define DEFAULT_Ki 1.08 - #define DEFAULT_Kd 114.00 + #define DEFAULT_Kp 14.58 + #define DEFAULT_Ki 1.14 + #define DEFAULT_Kd 46.57 #endif #endif // PIDTEMP @@ -540,7 +543,7 @@ * heater. If your configuration is significantly different than this and you don't understand * the issues involved, don't use bed PID until someone else verifies that your hardware works. */ -//#define PIDTEMPBED +#define PIDTEMPBED //#define BED_LIMIT_SWITCHING @@ -556,11 +559,10 @@ //#define MIN_BED_POWER 0 //#define PID_BED_DEBUG // Sends debug data to the serial port. - // 120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - // from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) - #define DEFAULT_bedKp 10.00 - #define DEFAULT_bedKi .023 - #define DEFAULT_bedKd 305.4 + // Sidewinder X1 + #define DEFAULT_bedKp 244.21 + #define DEFAULT_bedKi 45.87 + #define DEFAULT_bedKd 325.08 // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. #endif // PIDTEMPBED @@ -717,9 +719,9 @@ #endif // Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. +#define X_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Y_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Z_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. #define X_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. #define Y_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. #define Z_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. @@ -743,15 +745,15 @@ * TMC5130, TMC5130_STANDALONE, TMC5160, TMC5160_STANDALONE * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'L6474', 'POWERSTEP01', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2160', 'TMC2160_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC2209', 'TMC2209_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE', 'TMC5160', 'TMC5160_STANDALONE'] */ -#define X_DRIVER_TYPE A4988 -#define Y_DRIVER_TYPE A4988 -#define Z_DRIVER_TYPE A4988 +#define X_DRIVER_TYPE TMC2100 +#define Y_DRIVER_TYPE TMC2100 +#define Z_DRIVER_TYPE TMC2100 //#define X2_DRIVER_TYPE A4988 //#define Y2_DRIVER_TYPE A4988 -//#define Z2_DRIVER_TYPE A4988 +#define Z2_DRIVER_TYPE TMC2100 //#define Z3_DRIVER_TYPE A4988 //#define Z4_DRIVER_TYPE A4988 -#define E0_DRIVER_TYPE A4988 +#define E0_DRIVER_TYPE TMC2100 //#define E1_DRIVER_TYPE A4988 //#define E2_DRIVER_TYPE A4988 //#define E3_DRIVER_TYPE A4988 @@ -776,7 +778,7 @@ * * :[2,3,4,5,6,7] */ -//#define ENDSTOP_NOISE_THRESHOLD 2 +#define ENDSTOP_NOISE_THRESHOLD 2 // Check for stuck or disconnected endstops during homing moves. //#define DETECT_BROKEN_ENDSTOP @@ -806,14 +808,14 @@ * Override with M92 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 500 } +#define DEFAULT_AXIS_STEPS_PER_UNIT { 80.121, 80.121, 399.778, 445 } /** * Default Max Feed Rate (mm/s) * Override with M203 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 } +#define DEFAULT_MAX_FEEDRATE { 300, 300, 50, 40 } //#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 #if ENABLED(LIMITED_MAX_FR_EDITING) @@ -826,7 +828,7 @@ * Override with M201 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 } +#define DEFAULT_MAX_ACCELERATION { 2000, 2000, 100, 10000 } //#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 #if ENABLED(LIMITED_MAX_ACCEL_EDITING) @@ -841,9 +843,9 @@ * M204 R Retract Acceleration * M204 T Travel Acceleration */ -#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves +#define DEFAULT_ACCELERATION 800 // X, Y, Z and E acceleration for printing moves +#define DEFAULT_RETRACT_ACCELERATION 10000 // E acceleration for retracts +#define DEFAULT_TRAVEL_ACCELERATION 2000 // X, Y, Z acceleration for travel (non printing) moves /** * Default Jerk limits (mm/s) @@ -855,8 +857,8 @@ */ //#define CLASSIC_JERK #if ENABLED(CLASSIC_JERK) - #define DEFAULT_XJERK 10.0 - #define DEFAULT_YJERK 10.0 + #define DEFAULT_XJERK 8.0 + #define DEFAULT_YJERK 8.0 #define DEFAULT_ZJERK 0.3 //#define TRAVEL_EXTRA_XYJERK 0.0 // Additional jerk allowance for all travel moves @@ -877,7 +879,7 @@ * https://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html */ #if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.013 // (mm) Distance from real junction edge + #define JUNCTION_DEVIATION_MM 0.032 // (mm) Distance from real junction edge #define JD_HANDLE_SMALL_SEGMENTS // Use curvature estimation instead of just the junction angle // for small segments (< 1mm) with large junction angles (> 135°). #endif @@ -890,7 +892,7 @@ * * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained */ -//#define S_CURVE_ACCELERATION +#define S_CURVE_ACCELERATION //=========================================================================== //============================= Z Probe Options ============================= @@ -1065,7 +1067,7 @@ #define XY_PROBE_FEEDRATE (133*60) // Feedrate (mm/min) for the first approach when double-probing (MULTIPLE_PROBING == 2) -#define Z_PROBE_FEEDRATE_FAST (4*60) +#define Z_PROBE_FEEDRATE_FAST (20*60) // Feedrate (mm/min) for the "accurate" probe of each point #define Z_PROBE_FEEDRATE_SLOW (Z_PROBE_FEEDRATE_FAST / 2) @@ -1191,8 +1193,8 @@ // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR false -#define INVERT_Y_DIR true -#define INVERT_Z_DIR false +#define INVERT_Y_DIR false +#define INVERT_Z_DIR true // @section extruder @@ -1232,16 +1234,16 @@ // @section machine // The size of the printable area -#define X_BED_SIZE 200 -#define Y_BED_SIZE 200 +#define X_BED_SIZE 300 +#define Y_BED_SIZE 310 // Travel limits (mm) after homing, corresponding to endstop positions. -#define X_MIN_POS 0 -#define Y_MIN_POS 0 +#define X_MIN_POS -2 +#define Y_MIN_POS -5 #define Z_MIN_POS 0 #define X_MAX_POS X_BED_SIZE #define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 200 +#define Z_MAX_POS 400 /** * Software Endstops @@ -1595,7 +1597,7 @@ #endif // Homing speeds (mm/min) -#define HOMING_FEEDRATE_MM_M { (50*60), (50*60), (4*60) } +#define HOMING_FEEDRATE_MM_M { (80*60), (80*60), (20*60) } // Validate that endstops are triggered on homing moves #define VALIDATE_HOMING_ENDSTOPS @@ -1672,7 +1674,7 @@ * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) */ -//#define EEPROM_SETTINGS // Persistent storage with M500 and M501 +#define EEPROM_SETTINGS // Persistent storage with M500 and M501 //#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. #define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load @@ -2671,14 +2673,14 @@ * * LED Type. Enable only one of the following two options. */ -//#define RGB_LED +#define RGB_LED //#define RGBW_LED #if EITHER(RGB_LED, RGBW_LED) - //#define RGB_LED_R_PIN 34 - //#define RGB_LED_G_PIN 43 - //#define RGB_LED_B_PIN 35 - //#define RGB_LED_W_PIN -1 + #define RGB_LED_R_PIN 5 + #define RGB_LED_G_PIN 4 + #define RGB_LED_B_PIN 6 + #define RGB_LED_W_PIN -1 #endif // Support for Adafruit NeoPixel LED driver diff --git a/config/examples/Artillery/Sidewinder X1/Configuration_adv.h b/config/examples/Artillery/Sidewinder X1/Configuration_adv.h index 5335fa012a..cf872a49e1 100644 --- a/config/examples/Artillery/Sidewinder X1/Configuration_adv.h +++ b/config/examples/Artillery/Sidewinder X1/Configuration_adv.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Artillery/Sidewinder X1" + /** * Configuration_adv.h * @@ -540,7 +542,7 @@ * Multiple extruders can be assigned to the same pin in which case * the fan will turn on when any selected extruder is above the threshold. */ -#define E0_AUTO_FAN_PIN -1 +#define E0_AUTO_FAN_PIN 7 #define E1_AUTO_FAN_PIN -1 #define E2_AUTO_FAN_PIN -1 #define E3_AUTO_FAN_PIN -1 @@ -648,7 +650,7 @@ // // For Z set the number of stepper drivers // -#define NUM_Z_STEPPER_DRIVERS 1 // (1-4) Z options change based on how many +#define NUM_Z_STEPPER_DRIVERS 2 // (1-4) Z options change based on how many #if NUM_Z_STEPPER_DRIVERS > 1 // Enable if Z motor direction signals are the opposite of Z1 @@ -741,7 +743,7 @@ //#define HOMING_BACKOFF_POST_MM { 2, 2, 2 } // (mm) Backoff from endstops after homing -//#define QUICK_HOME // If G28 contains XY do a diagonal move first +#define QUICK_HOME // If G28 contains XY do a diagonal move first //#define HOME_Y_BEFORE_X // If G28 contains XY home Y before X //#define HOME_Z_FIRST // Home Z first. Requires a Z-MIN endstop (not a probe). //#define CODEPENDENT_XY_HOMING // If X/Y can't home without homing Y/X first @@ -867,7 +869,7 @@ // On a 300mm bed a 5% grade would give a misalignment of ~1.5cm #define G34_MAX_GRADE 5 // (%) Maximum incline that G34 will handle - #define Z_STEPPER_ALIGN_ITERATIONS 5 // Number of iterations to apply during alignment + #define Z_STEPPER_ALIGN_ITERATIONS 3 // Number of iterations to apply during alignment #define Z_STEPPER_ALIGN_ACC 0.02 // Stop iterating early if the accuracy is better than this #define RESTORE_LEVELING_AFTER_G34 // Restore leveling after G34 is done? // After G34, re-home Z (G28 Z) or just calculate it from the last probe heights? @@ -1059,7 +1061,7 @@ * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the * lowest stepping frequencies. */ -//#define ADAPTIVE_STEP_SMOOTHING +#define ADAPTIVE_STEP_SMOOTHING /** * Custom Microstepping @@ -1790,11 +1792,11 @@ * * Warning: Does not respect endstops! */ -//#define BABYSTEPPING +#define BABYSTEPPING #if ENABLED(BABYSTEPPING) //#define INTEGRATED_BABYSTEPPING // EXPERIMENTAL integration of babystepping into the Stepper ISR //#define BABYSTEP_WITHOUT_HOMING - //#define BABYSTEP_ALWAYS_AVAILABLE // Allow babystepping at all times (not just during movement). + #define BABYSTEP_ALWAYS_AVAILABLE // Allow babystepping at all times (not just during movement). //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way //#define BABYSTEP_MILLIMETER_UNITS // Specify BABYSTEP_MULTIPLICATOR_(XY|Z) in mm instead of micro-steps @@ -2719,7 +2721,7 @@ * Define your own with: * { , , hysteresis_start[1..8] } */ - #define CHOPPER_TIMING CHOPPER_DEFAULT_12V // All axes (override below) + #define CHOPPER_TIMING CHOPPER_DEFAULT_24V // All axes (override below) //#define CHOPPER_TIMING_X CHOPPER_TIMING // For X Axes (override below) //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X //#define CHOPPER_TIMING_Y CHOPPER_TIMING // For Y Axes (override below) diff --git a/config/examples/Artillery/Sidewinder X1_0.9_degree_BMG_E3D_V6/Configuration.h b/config/examples/Artillery/Sidewinder X1_0.9_degree_BMG_E3D_V6/Configuration.h index 78c2dc9160..d2b3271f06 100644 --- a/config/examples/Artillery/Sidewinder X1_0.9_degree_BMG_E3D_V6/Configuration.h +++ b/config/examples/Artillery/Sidewinder X1_0.9_degree_BMG_E3D_V6/Configuration.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Artillery/Sidewinder X1_0.9_degree_BMG_E3D_V6" + /** * Configuration.h * @@ -69,7 +71,7 @@ // @section info // Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes. +#define STRING_CONFIG_H_AUTHOR "Robert Vandervoort" // Who made the changes. //#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) /** @@ -134,11 +136,11 @@ // Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_RAMPS_14_EFB + #define MOTHERBOARD BOARD_MKS_GEN_L #endif // Name displayed in the LCD "Ready" message and Info menu -//#define CUSTOM_MACHINE_NAME "3D Printer" +//#define CUSTOM_MACHINE_NAME "Sidewinder X1 BMG v6" // Printer's unique ID, used by some programs to differentiate between machines. // Choose your own or use a service like https://www.uuidgenerator.net/version4 @@ -416,7 +418,7 @@ * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. */ -#define TEMP_SENSOR_0 1 +#define TEMP_SENSOR_0 5 #define TEMP_SENSOR_1 0 #define TEMP_SENSOR_2 0 #define TEMP_SENSOR_3 0 @@ -424,7 +426,7 @@ #define TEMP_SENSOR_5 0 #define TEMP_SENSOR_6 0 #define TEMP_SENSOR_7 0 -#define TEMP_SENSOR_BED 0 +#define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 #define TEMP_SENSOR_COOLER 0 @@ -513,13 +515,24 @@ #if ENABLED(PID_PARAMS_PER_HOTEND) // Specify between 1 and HOTENDS values per array. // If fewer than EXTRUDER values are provided, the last element will be repeated. - #define DEFAULT_Kp_LIST { 22.20, 22.20 } - #define DEFAULT_Ki_LIST { 1.08, 1.08 } - #define DEFAULT_Kd_LIST { 114.00, 114.00 } + #define DEFAULT_Kp_LIST { 35.92, 35.92 } + #define DEFAULT_Ki_LIST { 5.69, 5.69 } + #define DEFAULT_Kd_LIST { 56.64, 56.64 } #else - #define DEFAULT_Kp 22.20 - #define DEFAULT_Ki 1.08 - #define DEFAULT_Kd 114.00 + // E3D V6 at 190C + //#define DEFAULT_Kp 38.87 + //#define DEFAULT_Ki 4.61 + //#define DEFAULT_Kd 82.00 + + // E3D at 200C + //#define DEFAULT_Kp 31.89 + //#define DEFAULT_Ki 3.93 + //#define DEFAULT_Kd 64.66 + + // E3D at 240C + #define DEFAULT_Kp 35.92 + #define DEFAULT_Ki 5.69 + #define DEFAULT_Kd 56.64 #endif #endif // PIDTEMP @@ -540,7 +553,7 @@ * heater. If your configuration is significantly different than this and you don't understand * the issues involved, don't use bed PID until someone else verifies that your hardware works. */ -//#define PIDTEMPBED +#define PIDTEMPBED //#define BED_LIMIT_SWITCHING @@ -556,11 +569,15 @@ //#define MIN_BED_POWER 0 //#define PID_BED_DEBUG // Sends debug data to the serial port. - // 120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - // from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) - #define DEFAULT_bedKp 10.00 - #define DEFAULT_bedKi .023 - #define DEFAULT_bedKd 305.4 + // Artillery Sidewinder heated bed at 60C + //#define DEFAULT_bedKp 32.49 + //#define DEFAULT_bedKi 5.29 + //#define DEFAULT_bedKd 133.10 + + // Artillery Sidewinder heated bed at 100C + #define DEFAULT_bedKp 41.68 + #define DEFAULT_bedKi 6.88 + #define DEFAULT_bedKd 168.43 // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. #endif // PIDTEMPBED @@ -717,13 +734,13 @@ #endif // Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. +#define X_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Y_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Z_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. #define X_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. #define Y_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. #define Z_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_PROBE_ENDSTOP_INVERTING false // Set to true to invert the logic of the probe. +#define Z_MIN_PROBE_ENDSTOP_INVERTING true// Set to true to invert the logic of the probe. /** * Stepper Drivers @@ -743,15 +760,15 @@ * TMC5130, TMC5130_STANDALONE, TMC5160, TMC5160_STANDALONE * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'L6474', 'POWERSTEP01', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2160', 'TMC2160_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC2209', 'TMC2209_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE', 'TMC5160', 'TMC5160_STANDALONE'] */ -#define X_DRIVER_TYPE A4988 -#define Y_DRIVER_TYPE A4988 -#define Z_DRIVER_TYPE A4988 +#define X_DRIVER_TYPE TMC2100 +#define Y_DRIVER_TYPE TMC2100 +#define Z_DRIVER_TYPE TMC2100 //#define X2_DRIVER_TYPE A4988 //#define Y2_DRIVER_TYPE A4988 -//#define Z2_DRIVER_TYPE A4988 +#define Z2_DRIVER_TYPE TMC2100 //#define Z3_DRIVER_TYPE A4988 //#define Z4_DRIVER_TYPE A4988 -#define E0_DRIVER_TYPE A4988 +#define E0_DRIVER_TYPE TMC2100 //#define E1_DRIVER_TYPE A4988 //#define E2_DRIVER_TYPE A4988 //#define E3_DRIVER_TYPE A4988 @@ -806,14 +823,15 @@ * Override with M92 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 500 } +// use 838 for BMG extruder mated to LDO Motors .9 degree stepper with stock microstepping at 15bits +#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 838 } /** * Default Max Feed Rate (mm/s) * Override with M203 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 } +#define DEFAULT_MAX_FEEDRATE { 300, 300, 50, 40 } //#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 #if ENABLED(LIMITED_MAX_FR_EDITING) @@ -826,7 +844,7 @@ * Override with M201 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 } +#define DEFAULT_MAX_ACCELERATION { 2000, 2000, 100, 10000 } //#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 #if ENABLED(LIMITED_MAX_ACCEL_EDITING) @@ -841,9 +859,9 @@ * M204 R Retract Acceleration * M204 T Travel Acceleration */ -#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves +#define DEFAULT_ACCELERATION 800 // X, Y, Z and E acceleration for printing moves +#define DEFAULT_RETRACT_ACCELERATION 10000 // E acceleration for retracts +#define DEFAULT_TRAVEL_ACCELERATION 2000 // X, Y, Z acceleration for travel (non printing) moves /** * Default Jerk limits (mm/s) @@ -855,8 +873,8 @@ */ //#define CLASSIC_JERK #if ENABLED(CLASSIC_JERK) - #define DEFAULT_XJERK 10.0 - #define DEFAULT_YJERK 10.0 + #define DEFAULT_XJERK 8.0 + #define DEFAULT_YJERK 8.0 #define DEFAULT_ZJERK 0.3 //#define TRAVEL_EXTRA_XYJERK 0.0 // Additional jerk allowance for all travel moves @@ -890,7 +908,7 @@ * * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained */ -//#define S_CURVE_ACCELERATION +#define S_CURVE_ACCELERATION //=========================================================================== //============================= Z Probe Options ============================= @@ -946,7 +964,7 @@ * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. * (e.g., an inductive probe or a nozzle-based probe-switch.) */ -//#define FIX_MOUNTED_PROBE +#define FIX_MOUNTED_PROBE /** * Use the nozzle as the probe, as with a conductive @@ -1065,7 +1083,7 @@ #define XY_PROBE_FEEDRATE (133*60) // Feedrate (mm/min) for the first approach when double-probing (MULTIPLE_PROBING == 2) -#define Z_PROBE_FEEDRATE_FAST (4*60) +#define Z_PROBE_FEEDRATE_FAST (20*60) // Feedrate (mm/min) for the "accurate" probe of each point #define Z_PROBE_FEEDRATE_SLOW (Z_PROBE_FEEDRATE_FAST / 2) @@ -1191,13 +1209,13 @@ // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR false -#define INVERT_Y_DIR true -#define INVERT_Z_DIR false +#define INVERT_Y_DIR false +#define INVERT_Z_DIR true // @section extruder // For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR false +#define INVERT_E0_DIR true #define INVERT_E1_DIR false #define INVERT_E2_DIR false #define INVERT_E3_DIR false @@ -1232,16 +1250,16 @@ // @section machine // The size of the printable area -#define X_BED_SIZE 200 -#define Y_BED_SIZE 200 +#define X_BED_SIZE 300 +#define Y_BED_SIZE 300 // Travel limits (mm) after homing, corresponding to endstop positions. -#define X_MIN_POS 0 -#define Y_MIN_POS 0 +#define X_MIN_POS -12 +#define Y_MIN_POS -5 #define Z_MIN_POS 0 #define X_MAX_POS X_BED_SIZE #define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 200 +#define Z_MAX_POS 385 /** * Software Endstops @@ -1486,7 +1504,7 @@ //#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh - #define MESH_INSET 1 // Set Mesh bounds as an inset region of the bed + #define MESH_INSET 10 // Set Mesh bounds as an inset region of the bed #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X @@ -1587,7 +1605,7 @@ // - Move the Z probe (or nozzle) to a defined XY point before Z Homing. // - Prevent Z homing when the Z probe is outside bed area. // -//#define Z_SAFE_HOMING +#define Z_SAFE_HOMING #if ENABLED(Z_SAFE_HOMING) #define Z_SAFE_HOMING_X_POINT X_CENTER // X point for Z homing @@ -1595,7 +1613,7 @@ #endif // Homing speeds (mm/min) -#define HOMING_FEEDRATE_MM_M { (50*60), (50*60), (4*60) } +#define HOMING_FEEDRATE_MM_M { (50*60), (50*60), (20*60) } // Validate that endstops are triggered on homing moves #define VALIDATE_HOMING_ENDSTOPS @@ -1672,7 +1690,7 @@ * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) */ -//#define EEPROM_SETTINGS // Persistent storage with M500 and M501 +#define EEPROM_SETTINGS // Persistent storage with M500 and M501 //#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. #define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load @@ -1706,8 +1724,8 @@ // Preheat Constants - Up to 5 are supported without changes // #define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 180 -#define PREHEAT_1_TEMP_BED 70 +#define PREHEAT_1_TEMP_HOTEND 190 +#define PREHEAT_1_TEMP_BED 60 #define PREHEAT_1_TEMP_CHAMBER 35 #define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 @@ -2671,14 +2689,14 @@ * * LED Type. Enable only one of the following two options. */ -//#define RGB_LED +#define RGB_LED //#define RGBW_LED #if EITHER(RGB_LED, RGBW_LED) - //#define RGB_LED_R_PIN 34 - //#define RGB_LED_G_PIN 43 - //#define RGB_LED_B_PIN 35 - //#define RGB_LED_W_PIN -1 + #define RGB_LED_R_PIN 5 + #define RGB_LED_G_PIN 4 + #define RGB_LED_B_PIN 6 + #define RGB_LED_W_PIN -1 #endif // Support for Adafruit NeoPixel LED driver diff --git a/config/examples/Artillery/Sidewinder X1_0.9_degree_BMG_E3D_V6/Configuration_adv.h b/config/examples/Artillery/Sidewinder X1_0.9_degree_BMG_E3D_V6/Configuration_adv.h index 5335fa012a..3ad0becc1a 100644 --- a/config/examples/Artillery/Sidewinder X1_0.9_degree_BMG_E3D_V6/Configuration_adv.h +++ b/config/examples/Artillery/Sidewinder X1_0.9_degree_BMG_E3D_V6/Configuration_adv.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Artillery/Sidewinder X1_0.9_degree_BMG_E3D_V6" + /** * Configuration_adv.h * @@ -540,7 +542,7 @@ * Multiple extruders can be assigned to the same pin in which case * the fan will turn on when any selected extruder is above the threshold. */ -#define E0_AUTO_FAN_PIN -1 +#define E0_AUTO_FAN_PIN 7 #define E1_AUTO_FAN_PIN -1 #define E2_AUTO_FAN_PIN -1 #define E3_AUTO_FAN_PIN -1 @@ -648,7 +650,7 @@ // // For Z set the number of stepper drivers // -#define NUM_Z_STEPPER_DRIVERS 1 // (1-4) Z options change based on how many +#define NUM_Z_STEPPER_DRIVERS 2 // (1-4) Z options change based on how many #if NUM_Z_STEPPER_DRIVERS > 1 // Enable if Z motor direction signals are the opposite of Z1 @@ -951,7 +953,7 @@ * See https://hydraraptor.blogspot.com/2010/12/frequency-limit.html * Use M201 F G to change limits at runtime. */ -//#define XY_FREQUENCY_LIMIT 10 // (Hz) Maximum frequency of small zigzag infill moves. Set with M201 F. +#define XY_FREQUENCY_LIMIT 10 // (Hz) Maximum frequency of small zigzag infill moves. Set with M201 F. #ifdef XY_FREQUENCY_LIMIT #define XY_FREQUENCY_MIN_PERCENT 5 // (percent) Minimum FR percentage to apply. Set with M201 G. #endif @@ -1059,7 +1061,7 @@ * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the * lowest stepping frequencies. */ -//#define ADAPTIVE_STEP_SMOOTHING +#define ADAPTIVE_STEP_SMOOTHING /** * Custom Microstepping @@ -1790,11 +1792,11 @@ * * Warning: Does not respect endstops! */ -//#define BABYSTEPPING +#define BABYSTEPPING #if ENABLED(BABYSTEPPING) //#define INTEGRATED_BABYSTEPPING // EXPERIMENTAL integration of babystepping into the Stepper ISR //#define BABYSTEP_WITHOUT_HOMING - //#define BABYSTEP_ALWAYS_AVAILABLE // Allow babystepping at all times (not just during movement). + #define BABYSTEP_ALWAYS_AVAILABLE // Allow babystepping at all times (not just during movement). //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way //#define BABYSTEP_MILLIMETER_UNITS // Specify BABYSTEP_MULTIPLICATOR_(XY|Z) in mm instead of micro-steps @@ -1813,7 +1815,7 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 - //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping + #define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping #if ENABLED(BABYSTEP_ZPROBE_OFFSET) //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor @@ -1837,12 +1839,12 @@ * * See https://marlinfw.org/docs/features/lin_advance.html for full instructions. */ -//#define LIN_ADVANCE +#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) //#define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants - #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed + #define LIN_ADVANCE_K 0.2 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // If enabled, this will generate debug information output over USB. - //#define EXPERIMENTAL_SCURVE // Enable this option to permit S-Curve Acceleration + #define EXPERIMENTAL_SCURVE // Enable this option to permit S-Curve Acceleration #endif // @section leveling @@ -2719,7 +2721,7 @@ * Define your own with: * { , , hysteresis_start[1..8] } */ - #define CHOPPER_TIMING CHOPPER_DEFAULT_12V // All axes (override below) + #define CHOPPER_TIMING CHOPPER_DEFAULT_24V // All axes (override below) //#define CHOPPER_TIMING_X CHOPPER_TIMING // For X Axes (override below) //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X //#define CHOPPER_TIMING_Y CHOPPER_TIMING // For Y Axes (override below) diff --git a/config/examples/Azteeg/X5GT/Configuration.h b/config/examples/Azteeg/X5GT/Configuration.h index 78c2dc9160..d5b761d232 100644 --- a/config/examples/Azteeg/X5GT/Configuration.h +++ b/config/examples/Azteeg/X5GT/Configuration.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Azteeg/X5GT" + /** * Configuration.h * @@ -127,14 +129,14 @@ * * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ -#define BAUDRATE 250000 +#define BAUDRATE 115200 // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH // Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_RAMPS_14_EFB + #define MOTHERBOARD BOARD_AZTEEG_X5_GT #endif // Name displayed in the LCD "Ready" message and Info menu @@ -148,7 +150,7 @@ // This defines the number of extruders // :[0, 1, 2, 3, 4, 5, 6, 7, 8] -#define EXTRUDERS 1 +#define EXTRUDERS 2 // Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc. #define DEFAULT_NOMINAL_FILAMENT_DIA 1.75 @@ -417,14 +419,14 @@ * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. */ #define TEMP_SENSOR_0 1 -#define TEMP_SENSOR_1 0 +#define TEMP_SENSOR_1 1 #define TEMP_SENSOR_2 0 #define TEMP_SENSOR_3 0 #define TEMP_SENSOR_4 0 #define TEMP_SENSOR_5 0 #define TEMP_SENSOR_6 0 #define TEMP_SENSOR_7 0 -#define TEMP_SENSOR_BED 0 +#define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 #define TEMP_SENSOR_COOLER 0 @@ -540,7 +542,7 @@ * heater. If your configuration is significantly different than this and you don't understand * the issues involved, don't use bed PID until someone else verifies that your hardware works. */ -//#define PIDTEMPBED +#define PIDTEMPBED //#define BED_LIMIT_SWITCHING @@ -686,9 +688,9 @@ #define USE_XMIN_PLUG #define USE_YMIN_PLUG #define USE_ZMIN_PLUG -//#define USE_XMAX_PLUG -//#define USE_YMAX_PLUG -//#define USE_ZMAX_PLUG +#define USE_XMAX_PLUG +#define USE_YMAX_PLUG +#define USE_ZMAX_PLUG // Enable pullup for all endstops to prevent a floating state #define ENDSTOPPULLUPS @@ -752,7 +754,7 @@ //#define Z3_DRIVER_TYPE A4988 //#define Z4_DRIVER_TYPE A4988 #define E0_DRIVER_TYPE A4988 -//#define E1_DRIVER_TYPE A4988 +#define E1_DRIVER_TYPE A4988 //#define E2_DRIVER_TYPE A4988 //#define E3_DRIVER_TYPE A4988 //#define E4_DRIVER_TYPE A4988 @@ -806,7 +808,7 @@ * Override with M92 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 500 } +#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 4000, 500 } /** * Default Max Feed Rate (mm/s) @@ -1587,7 +1589,7 @@ // - Move the Z probe (or nozzle) to a defined XY point before Z Homing. // - Prevent Z homing when the Z probe is outside bed area. // -//#define Z_SAFE_HOMING +#define Z_SAFE_HOMING #if ENABLED(Z_SAFE_HOMING) #define Z_SAFE_HOMING_X_POINT X_CENTER // X point for Z homing @@ -1672,7 +1674,7 @@ * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) */ -//#define EEPROM_SETTINGS // Persistent storage with M500 and M501 +#define EEPROM_SETTINGS // Persistent storage with M500 and M501 //#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. #define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load @@ -1845,7 +1847,7 @@ * * View the current statistics with M78. */ -//#define PRINTCOUNTER +#define PRINTCOUNTER #if ENABLED(PRINTCOUNTER) #define PRINTCOUNTER_SAVE_INTERVAL 60 // (minutes) EEPROM save interval during print #endif @@ -1921,7 +1923,7 @@ * * :['JAPANESE', 'WESTERN', 'CYRILLIC'] */ -#define DISPLAY_CHARSET_HD44780 JAPANESE +#define DISPLAY_CHARSET_HD44780 CYRILLIC /** * Info Screen Style (0:Classic, 1:Průša) @@ -1936,7 +1938,7 @@ * SD Card support is disabled by default. If your controller has an SD slot, * you must uncomment the following option or it won't work. */ -//#define SDSUPPORT +#define SDSUPPORT /** * SD CARD: ENABLE CRC @@ -2006,7 +2008,7 @@ // // Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. // -//#define INDIVIDUAL_AXIS_HOMING_MENU +#define INDIVIDUAL_AXIS_HOMING_MENU // // SPEAKER/BUZZER @@ -2213,7 +2215,7 @@ // Viki 2.0 or mini Viki with Graphic LCD // https://www.panucatt.com // -//#define VIKI2 +#define VIKI2 //#define miniVIKI // @@ -2636,7 +2638,7 @@ // Temperature status LEDs that display the hotend and bed temperature. // If all hotends, bed temperature, and target temperature are under 54C // then the BLUE led is on. Otherwise the RED led is on. (1C hysteresis) -//#define TEMP_STAT_LEDS +#define TEMP_STAT_LEDS // Support for the BariCUDA Paste Extruder //#define BARICUDA diff --git a/config/examples/Azteeg/X5GT/Configuration_adv.h b/config/examples/Azteeg/X5GT/Configuration_adv.h index 5335fa012a..e92d4f17b3 100644 --- a/config/examples/Azteeg/X5GT/Configuration_adv.h +++ b/config/examples/Azteeg/X5GT/Configuration_adv.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Azteeg/X5GT" + /** * Configuration_adv.h * diff --git a/config/examples/BIBO/TouchX/cyclops/Configuration.h b/config/examples/BIBO/TouchX/cyclops/Configuration.h index 78c2dc9160..6d445538c4 100644 --- a/config/examples/BIBO/TouchX/cyclops/Configuration.h +++ b/config/examples/BIBO/TouchX/cyclops/Configuration.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "BIBO/TouchX/cyclops" + /** * Configuration.h * @@ -134,11 +136,11 @@ // Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_RAMPS_14_EFB + #define MOTHERBOARD BOARD_MKS_GEN_L #endif // Name displayed in the LCD "Ready" message and Info menu -//#define CUSTOM_MACHINE_NAME "3D Printer" +#define CUSTOM_MACHINE_NAME "BIBO2 Touch X" // Printer's unique ID, used by some programs to differentiate between machines. // Choose your own or use a service like https://www.uuidgenerator.net/version4 @@ -148,13 +150,13 @@ // This defines the number of extruders // :[0, 1, 2, 3, 4, 5, 6, 7, 8] -#define EXTRUDERS 1 +#define EXTRUDERS 2 // Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc. #define DEFAULT_NOMINAL_FILAMENT_DIA 1.75 // For Cyclops or any "multi-extruder" that shares a single nozzle. -//#define SINGLENOZZLE +#define SINGLENOZZLE // Save and restore temperature and fan speed on tool-change. // Set standby for the unselected tool with M104/106/109 T... @@ -306,7 +308,7 @@ // Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing). // The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder). // For the other hotends it is their distance from the extruder 0 hotend. -//#define HOTEND_OFFSET_X { 0.0, 20.00 } // (mm) relative X-offset for each nozzle +#define HOTEND_OFFSET_X { 0.0, -33.00 } // (mm) relative X-offset for each nozzle //#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle //#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle @@ -416,7 +418,7 @@ * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. */ -#define TEMP_SENSOR_0 1 +#define TEMP_SENSOR_0 5 #define TEMP_SENSOR_1 0 #define TEMP_SENSOR_2 0 #define TEMP_SENSOR_3 0 @@ -424,7 +426,7 @@ #define TEMP_SENSOR_5 0 #define TEMP_SENSOR_6 0 #define TEMP_SENSOR_7 0 -#define TEMP_SENSOR_BED 0 +#define TEMP_SENSOR_BED 5 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 #define TEMP_SENSOR_COOLER 0 @@ -472,7 +474,7 @@ // Above this temperature the heater will be switched off. // This can protect components from overheating, but NOT from shorts and failures. // (Use MINTEMP for thermistor short/failure protection.) -#define HEATER_0_MAXTEMP 275 +#define HEATER_0_MAXTEMP 285 #define HEATER_1_MAXTEMP 275 #define HEATER_2_MAXTEMP 275 #define HEATER_3_MAXTEMP 275 @@ -480,7 +482,7 @@ #define HEATER_5_MAXTEMP 275 #define HEATER_6_MAXTEMP 275 #define HEATER_7_MAXTEMP 275 -#define BED_MAXTEMP 150 +#define BED_MAXTEMP 115 #define CHAMBER_MAXTEMP 60 /** @@ -513,13 +515,13 @@ #if ENABLED(PID_PARAMS_PER_HOTEND) // Specify between 1 and HOTENDS values per array. // If fewer than EXTRUDER values are provided, the last element will be repeated. - #define DEFAULT_Kp_LIST { 22.20, 22.20 } - #define DEFAULT_Ki_LIST { 1.08, 1.08 } - #define DEFAULT_Kd_LIST { 114.00, 114.00 } + #define DEFAULT_Kp_LIST { 23.89, 23.89 } + #define DEFAULT_Ki_LIST { 1.37, 1.37 } + #define DEFAULT_Kd_LIST { 104.50, 104.50 } #else - #define DEFAULT_Kp 22.20 - #define DEFAULT_Ki 1.08 - #define DEFAULT_Kd 114.00 + #define DEFAULT_Kp 23.89 + #define DEFAULT_Ki 1.37 + #define DEFAULT_Kd 104.50 #endif #endif // PIDTEMP @@ -558,9 +560,9 @@ // 120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) // from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) - #define DEFAULT_bedKp 10.00 - #define DEFAULT_bedKi .023 - #define DEFAULT_bedKd 305.4 + #define DEFAULT_bedKp 23.89 + #define DEFAULT_bedKi 1.37 + #define DEFAULT_bedKd 104.5 // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. #endif // PIDTEMPBED @@ -626,8 +628,8 @@ * * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** */ -#define PREVENT_COLD_EXTRUSION -#define EXTRUDE_MINTEMP 170 +//#define PREVENT_COLD_EXTRUSION +//#define EXTRUDE_MINTEMP 170 /** * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. @@ -717,13 +719,13 @@ #endif // Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define X_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_PROBE_ENDSTOP_INVERTING false // Set to true to invert the logic of the probe. +#define X_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Y_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Z_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define X_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Y_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Z_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Z_MIN_PROBE_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. /** * Stepper Drivers @@ -752,7 +754,7 @@ //#define Z3_DRIVER_TYPE A4988 //#define Z4_DRIVER_TYPE A4988 #define E0_DRIVER_TYPE A4988 -//#define E1_DRIVER_TYPE A4988 +#define E1_DRIVER_TYPE A4988 //#define E2_DRIVER_TYPE A4988 //#define E3_DRIVER_TYPE A4988 //#define E4_DRIVER_TYPE A4988 @@ -806,14 +808,14 @@ * Override with M92 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 500 } +#define DEFAULT_AXIS_STEPS_PER_UNIT { 100, 100, 400, 400} /** * Default Max Feed Rate (mm/s) * Override with M203 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 } +#define DEFAULT_MAX_FEEDRATE { 350, 350, 10, 50 } //#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 #if ENABLED(LIMITED_MAX_FR_EDITING) @@ -826,7 +828,7 @@ * Override with M201 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 } +#define DEFAULT_MAX_ACCELERATION { 1100, 1100, 300, 2500 } //#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 #if ENABLED(LIMITED_MAX_ACCEL_EDITING) @@ -841,9 +843,9 @@ * M204 R Retract Acceleration * M204 T Travel Acceleration */ -#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves +#define DEFAULT_ACCELERATION 1100 // X, Y, Z and E acceleration for printing moves +#define DEFAULT_RETRACT_ACCELERATION 1100 // E acceleration for retracts +#define DEFAULT_TRAVEL_ACCELERATION 1100 // X, Y, Z acceleration for travel (non printing) moves /** * Default Jerk limits (mm/s) @@ -855,9 +857,9 @@ */ //#define CLASSIC_JERK #if ENABLED(CLASSIC_JERK) - #define DEFAULT_XJERK 10.0 - #define DEFAULT_YJERK 10.0 - #define DEFAULT_ZJERK 0.3 + #define DEFAULT_XJERK 7.0 + #define DEFAULT_YJERK 7.0 + #define DEFAULT_ZJERK 0.65 //#define TRAVEL_EXTRA_XYJERK 0.0 // Additional jerk allowance for all travel moves @@ -877,7 +879,7 @@ * https://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html */ #if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.013 // (mm) Distance from real junction edge + #define JUNCTION_DEVIATION_MM 0.018 // (mm) Distance from real junction edge #define JD_HANDLE_SMALL_SEGMENTS // Use curvature estimation instead of just the junction angle // for small segments (< 1mm) with large junction angles (> 135°). #endif @@ -906,7 +908,7 @@ * The probe replaces the Z-MIN endstop and is used for Z homing. * (Automatically enables USE_PROBE_FOR_Z_HOMING.) */ -#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN +//#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN // Force the use of the probe for Z-axis homing //#define USE_PROBE_FOR_Z_HOMING @@ -1062,10 +1064,10 @@ #define PROBING_MARGIN 10 // X and Y axis travel speed (mm/min) between probes -#define XY_PROBE_FEEDRATE (133*60) +#define XY_PROBE_FEEDRATE (150*60) // Feedrate (mm/min) for the first approach when double-probing (MULTIPLE_PROBING == 2) -#define Z_PROBE_FEEDRATE_FAST (4*60) +#define Z_PROBE_FEEDRATE_FAST (6*60) // Feedrate (mm/min) for the "accurate" probe of each point #define Z_PROBE_FEEDRATE_SLOW (Z_PROBE_FEEDRATE_FAST / 2) @@ -1126,7 +1128,7 @@ #define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow #define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points #define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes -//#define Z_AFTER_PROBING 5 // Z position after probing is done +//#define Z_AFTER_PROBING 10 // Z position after probing is done #define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping @@ -1185,20 +1187,20 @@ // @section extruder #define DISABLE_E false // Disable the extruder when not stepping -#define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled +//#define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled // @section machine // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR false -#define INVERT_Y_DIR true +#define INVERT_X_DIR true +#define INVERT_Y_DIR false #define INVERT_Z_DIR false // @section extruder // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR false -#define INVERT_E1_DIR false +#define INVERT_E1_DIR true #define INVERT_E2_DIR false #define INVERT_E3_DIR false #define INVERT_E4_DIR false @@ -1218,7 +1220,7 @@ */ //#define Z_IDLE_HEIGHT Z_HOME_POS -//#define Z_HOMING_HEIGHT 4 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ... +#define Z_HOMING_HEIGHT 8 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ... // Be sure to have this much clearance over your Z_MAX_POS to prevent grinding. //#define Z_AFTER_HOMING 10 // (mm) Height to move to after homing Z @@ -1232,16 +1234,16 @@ // @section machine // The size of the printable area -#define X_BED_SIZE 200 -#define Y_BED_SIZE 200 +#define X_BED_SIZE 220 +#define Y_BED_SIZE 186 // Travel limits (mm) after homing, corresponding to endstop positions. -#define X_MIN_POS 0 +#define X_MIN_POS -13 #define Y_MIN_POS 0 #define Z_MIN_POS 0 -#define X_MAX_POS X_BED_SIZE -#define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 200 +#define X_MAX_POS 250 +#define Y_MAX_POS 186 +#define Z_MAX_POS 186 /** * Software Endstops @@ -1438,7 +1440,7 @@ /** * Enable the G26 Mesh Validation Pattern tool. */ - //#define G26_MESH_VALIDATION + #define G26_MESH_VALIDATION #if ENABLED(G26_MESH_VALIDATION) #define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle. #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for G26. @@ -1527,7 +1529,7 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS +#define LEVEL_BED_CORNERS #if ENABLED(LEVEL_BED_CORNERS) #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets @@ -1595,7 +1597,7 @@ #endif // Homing speeds (mm/min) -#define HOMING_FEEDRATE_MM_M { (50*60), (50*60), (4*60) } +#define HOMING_FEEDRATE_MM_M { (25*60), (25*60), (6*60) } // Validate that endstops are triggered on homing moves #define VALIDATE_HOMING_ENDSTOPS @@ -1672,7 +1674,7 @@ * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) */ -//#define EEPROM_SETTINGS // Persistent storage with M500 and M501 +#define EEPROM_SETTINGS // Persistent storage with M500 and M501 //#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. #define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load @@ -1706,14 +1708,14 @@ // Preheat Constants - Up to 5 are supported without changes // #define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 180 -#define PREHEAT_1_TEMP_BED 70 +#define PREHEAT_1_TEMP_HOTEND 190 +#define PREHEAT_1_TEMP_BED 65 #define PREHEAT_1_TEMP_CHAMBER 35 #define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 #define PREHEAT_2_LABEL "ABS" #define PREHEAT_2_TEMP_HOTEND 240 -#define PREHEAT_2_TEMP_BED 110 +#define PREHEAT_2_TEMP_BED 100 #define PREHEAT_2_TEMP_CHAMBER 35 #define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 @@ -1936,7 +1938,7 @@ * SD Card support is disabled by default. If your controller has an SD slot, * you must uncomment the following option or it won't work. */ -//#define SDSUPPORT +#define SDSUPPORT /** * SD CARD: ENABLE CRC @@ -1983,7 +1985,7 @@ // // Set this option if CLOCKWISE causes values to DECREASE // -//#define REVERSE_ENCODER_DIRECTION +#define REVERSE_ENCODER_DIRECTION // // This option reverses the encoder direction for navigating LCD menus. @@ -2006,7 +2008,7 @@ // // Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. // -//#define INDIVIDUAL_AXIS_HOMING_MENU +#define INDIVIDUAL_AXIS_HOMING_MENU // // SPEAKER/BUZZER @@ -2195,7 +2197,7 @@ // RepRapDiscount FULL GRAPHIC Smart Controller // https://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller // -//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER +#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER // // K.3D Full Graphic Smart Controller diff --git a/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h b/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h index 5335fa012a..49a4e54454 100644 --- a/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h +++ b/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "BIBO/TouchX/cyclops" + /** * Configuration_adv.h * @@ -238,8 +240,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 45 // Seconds + #define THERMAL_PROTECTION_HYSTERESIS 2 // Degrees Celsius //#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops #if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP) @@ -258,22 +260,22 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 20 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 60 // Seconds + #define WATCH_TEMP_INCREASE 1 // Degrees Celsius #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 60 // Seconds + #define THERMAL_PROTECTION_BED_HYSTERESIS 3 // Degrees Celsius /** * As described above, except for the bed (M140/M190/M303). */ #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_INCREASE 1 // Degrees Celsius #endif /** @@ -867,7 +869,7 @@ // On a 300mm bed a 5% grade would give a misalignment of ~1.5cm #define G34_MAX_GRADE 5 // (%) Maximum incline that G34 will handle - #define Z_STEPPER_ALIGN_ITERATIONS 5 // Number of iterations to apply during alignment + #define Z_STEPPER_ALIGN_ITERATIONS 3 // Number of iterations to apply during alignment #define Z_STEPPER_ALIGN_ACC 0.02 // Stop iterating early if the accuracy is better than this #define RESTORE_LEVELING_AFTER_G34 // Restore leveling after G34 is done? // After G34, re-home Z (G28 Z) or just calculate it from the last probe heights? diff --git a/config/examples/BIBO/TouchX/default/Configuration.h b/config/examples/BIBO/TouchX/default/Configuration.h index 78c2dc9160..7975448a77 100644 --- a/config/examples/BIBO/TouchX/default/Configuration.h +++ b/config/examples/BIBO/TouchX/default/Configuration.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "BIBO/TouchX/default" + /** * Configuration.h * @@ -134,11 +136,11 @@ // Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_RAMPS_14_EFB + #define MOTHERBOARD BOARD_MKS_GEN_L #endif // Name displayed in the LCD "Ready" message and Info menu -//#define CUSTOM_MACHINE_NAME "3D Printer" +#define CUSTOM_MACHINE_NAME "BIBO2 Touch X" // Printer's unique ID, used by some programs to differentiate between machines. // Choose your own or use a service like https://www.uuidgenerator.net/version4 @@ -148,7 +150,7 @@ // This defines the number of extruders // :[0, 1, 2, 3, 4, 5, 6, 7, 8] -#define EXTRUDERS 1 +#define EXTRUDERS 2 // Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc. #define DEFAULT_NOMINAL_FILAMENT_DIA 1.75 @@ -306,7 +308,7 @@ // Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing). // The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder). // For the other hotends it is their distance from the extruder 0 hotend. -//#define HOTEND_OFFSET_X { 0.0, 20.00 } // (mm) relative X-offset for each nozzle +#define HOTEND_OFFSET_X { 0.0, -33.00 } // (mm) relative X-offset for each nozzle //#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle //#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle @@ -416,15 +418,15 @@ * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. */ -#define TEMP_SENSOR_0 1 -#define TEMP_SENSOR_1 0 +#define TEMP_SENSOR_0 5 +#define TEMP_SENSOR_1 5 #define TEMP_SENSOR_2 0 #define TEMP_SENSOR_3 0 #define TEMP_SENSOR_4 0 #define TEMP_SENSOR_5 0 #define TEMP_SENSOR_6 0 #define TEMP_SENSOR_7 0 -#define TEMP_SENSOR_BED 0 +#define TEMP_SENSOR_BED 60 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 #define TEMP_SENSOR_COOLER 0 @@ -480,8 +482,8 @@ #define HEATER_5_MAXTEMP 275 #define HEATER_6_MAXTEMP 275 #define HEATER_7_MAXTEMP 275 -#define BED_MAXTEMP 150 -#define CHAMBER_MAXTEMP 60 +#define BED_MAXTEMP 115 +#define CHAMBER_MAXTEMP 60 /** * Thermal Overshoot @@ -513,13 +515,13 @@ #if ENABLED(PID_PARAMS_PER_HOTEND) // Specify between 1 and HOTENDS values per array. // If fewer than EXTRUDER values are provided, the last element will be repeated. - #define DEFAULT_Kp_LIST { 22.20, 22.20 } - #define DEFAULT_Ki_LIST { 1.08, 1.08 } - #define DEFAULT_Kd_LIST { 114.00, 114.00 } + #define DEFAULT_Kp_LIST { 23.89, 23.89 } + #define DEFAULT_Ki_LIST { 1.37, 1.37 } + #define DEFAULT_Kd_LIST { 104.50, 104.50 } #else - #define DEFAULT_Kp 22.20 - #define DEFAULT_Ki 1.08 - #define DEFAULT_Kd 114.00 + #define DEFAULT_Kp 23.89 + #define DEFAULT_Ki 1.37 + #define DEFAULT_Kd 104.50 #endif #endif // PIDTEMP @@ -558,58 +560,14 @@ // 120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) // from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) - #define DEFAULT_bedKp 10.00 - #define DEFAULT_bedKi .023 - #define DEFAULT_bedKd 305.4 + #define DEFAULT_bedKp 23.89 + #define DEFAULT_bedKi 1.37 + #define DEFAULT_bedKd 104.5 // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. #endif // PIDTEMPBED -//=========================================================================== -//==================== PID > Chamber Temperature Control ==================== -//=========================================================================== - -/** - * PID Chamber Heating - * - * If this option is enabled set PID constants below. - * If this option is disabled, bang-bang will be used and CHAMBER_LIMIT_SWITCHING will enable - * hysteresis. - * - * The PID frequency will be the same as the extruder PWM. - * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz, - * which is fine for driving a square wave into a resistive load and does not significantly - * impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 200W - * heater. If your configuration is significantly different than this and you don't understand - * the issues involved, don't use chamber PID until someone else verifies that your hardware works. - */ -//#define PIDTEMPCHAMBER -//#define CHAMBER_LIMIT_SWITCHING - -/** - * Max Chamber Power - * Applies to all forms of chamber control (PID, bang-bang, and bang-bang with hysteresis). - * When set to any value below 255, enables a form of PWM to the chamber heater that acts like a divider - * so don't use it unless you are OK with PWM on your heater. (See the comment on enabling PIDTEMPCHAMBER) - */ -#define MAX_CHAMBER_POWER 255 // limits duty cycle to chamber heater; 255=full current - -#if ENABLED(PIDTEMPCHAMBER) - #define MIN_CHAMBER_POWER 0 - //#define PID_CHAMBER_DEBUG // Sends debug data to the serial port. - - // Lasko "MyHeat Personal Heater" (200w) modified with a Fotek SSR-10DA to control only the heating element - // and placed inside the small Creality printer enclosure tent. - // - #define DEFAULT_chamberKp 37.04 - #define DEFAULT_chamberKi 1.40 - #define DEFAULT_chamberKd 655.17 - // M309 P37.04 I1.04 D655.17 - - // FIND YOUR OWN: "M303 E-2 C8 S50" to run autotune on the chamber at 50 degreesC for 8 cycles. -#endif // PIDTEMPCHAMBER - -#if ANY(PIDTEMP, PIDTEMPBED, PIDTEMPCHAMBER) +#if EITHER(PIDTEMP, PIDTEMPBED) //#define PID_DEBUG // Sends debug data to the serial port. Use 'M303 D' to toggle activation. //#define PID_OPENLOOP // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX //#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay @@ -683,11 +641,11 @@ // Specify here all the endstop connectors that are connected to any endstop or probe. // Almost all printers will be using one per axis. Probes will use one or more of the // extra connectors. Leave undefined any used for non-endstop and non-probe purposes. -#define USE_XMIN_PLUG -#define USE_YMIN_PLUG +//#define USE_XMIN_PLUG +//#define USE_YMIN_PLUG #define USE_ZMIN_PLUG -//#define USE_XMAX_PLUG -//#define USE_YMAX_PLUG +#define USE_XMAX_PLUG +#define USE_YMAX_PLUG //#define USE_ZMAX_PLUG // Enable pullup for all endstops to prevent a floating state @@ -717,13 +675,13 @@ #endif // Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define X_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_PROBE_ENDSTOP_INVERTING false // Set to true to invert the logic of the probe. +#define X_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Y_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Z_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define X_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Y_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Z_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Z_MIN_PROBE_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. /** * Stepper Drivers @@ -752,7 +710,7 @@ //#define Z3_DRIVER_TYPE A4988 //#define Z4_DRIVER_TYPE A4988 #define E0_DRIVER_TYPE A4988 -//#define E1_DRIVER_TYPE A4988 +#define E1_DRIVER_TYPE A4988 //#define E2_DRIVER_TYPE A4988 //#define E3_DRIVER_TYPE A4988 //#define E4_DRIVER_TYPE A4988 @@ -806,14 +764,14 @@ * Override with M92 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 500 } +#define DEFAULT_AXIS_STEPS_PER_UNIT { 100, 100, 400, 93.6 } /** * Default Max Feed Rate (mm/s) * Override with M203 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 } +#define DEFAULT_MAX_FEEDRATE { 350, 350, 10, 25 } //#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 #if ENABLED(LIMITED_MAX_FR_EDITING) @@ -826,7 +784,7 @@ * Override with M201 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 } +#define DEFAULT_MAX_ACCELERATION { 1100, 1100, 300, 5000 } //#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 #if ENABLED(LIMITED_MAX_ACCEL_EDITING) @@ -841,9 +799,9 @@ * M204 R Retract Acceleration * M204 T Travel Acceleration */ -#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves +#define DEFAULT_ACCELERATION 1100 // X, Y, Z and E acceleration for printing moves +#define DEFAULT_RETRACT_ACCELERATION 1100 // E acceleration for retracts +#define DEFAULT_TRAVEL_ACCELERATION 1100 // X, Y, Z acceleration for travel (non printing) moves /** * Default Jerk limits (mm/s) @@ -855,9 +813,9 @@ */ //#define CLASSIC_JERK #if ENABLED(CLASSIC_JERK) - #define DEFAULT_XJERK 10.0 - #define DEFAULT_YJERK 10.0 - #define DEFAULT_ZJERK 0.3 + #define DEFAULT_XJERK 7.0 + #define DEFAULT_YJERK 7.0 + #define DEFAULT_ZJERK 0.65 //#define TRAVEL_EXTRA_XYJERK 0.0 // Additional jerk allowance for all travel moves @@ -877,7 +835,7 @@ * https://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html */ #if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.013 // (mm) Distance from real junction edge + #define JUNCTION_DEVIATION_MM 0.018 // (mm) Distance from real junction edge #define JD_HANDLE_SMALL_SEGMENTS // Use curvature estimation instead of just the junction angle // for small segments (< 1mm) with large junction angles (> 135°). #endif @@ -906,7 +864,7 @@ * The probe replaces the Z-MIN endstop and is used for Z homing. * (Automatically enables USE_PROBE_FOR_Z_HOMING.) */ -#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN +//#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN // Force the use of the probe for Z-axis homing //#define USE_PROBE_FOR_Z_HOMING @@ -1124,9 +1082,9 @@ * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. */ #define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow -#define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points +#define Z_CLEARANCE_BETWEEN_PROBES 10 // Z Clearance between probe points #define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes -//#define Z_AFTER_PROBING 5 // Z position after probing is done +//#define Z_AFTER_PROBING 10 // Z position after probing is done #define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping @@ -1185,7 +1143,7 @@ // @section extruder #define DISABLE_E false // Disable the extruder when not stepping -#define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled +//#define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled // @section machine @@ -1198,7 +1156,7 @@ // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR false -#define INVERT_E1_DIR false +#define INVERT_E1_DIR true #define INVERT_E2_DIR false #define INVERT_E3_DIR false #define INVERT_E4_DIR false @@ -1218,30 +1176,30 @@ */ //#define Z_IDLE_HEIGHT Z_HOME_POS -//#define Z_HOMING_HEIGHT 4 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ... +#define Z_HOMING_HEIGHT 10 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ... // Be sure to have this much clearance over your Z_MAX_POS to prevent grinding. //#define Z_AFTER_HOMING 10 // (mm) Height to move to after homing Z // Direction of endstops when homing; 1=MAX, -1=MIN // :[-1,1] -#define X_HOME_DIR -1 -#define Y_HOME_DIR -1 +#define X_HOME_DIR 1 +#define Y_HOME_DIR 1 #define Z_HOME_DIR -1 // @section machine // The size of the printable area -#define X_BED_SIZE 200 -#define Y_BED_SIZE 200 +#define X_BED_SIZE 214 +#define Y_BED_SIZE 186 // Travel limits (mm) after homing, corresponding to endstop positions. -#define X_MIN_POS 0 -#define Y_MIN_POS 0 +#define X_MIN_POS -107 +#define Y_MIN_POS -93 #define Z_MIN_POS 0 -#define X_MAX_POS X_BED_SIZE -#define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 200 +#define X_MAX_POS 141 +#define Y_MAX_POS 93 +#define Z_MAX_POS 186 /** * Software Endstops @@ -1438,7 +1396,7 @@ /** * Enable the G26 Mesh Validation Pattern tool. */ - //#define G26_MESH_VALIDATION + #define G26_MESH_VALIDATION #if ENABLED(G26_MESH_VALIDATION) #define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle. #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for G26. @@ -1527,7 +1485,7 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS +#define LEVEL_BED_CORNERS #if ENABLED(LEVEL_BED_CORNERS) #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets @@ -1595,7 +1553,7 @@ #endif // Homing speeds (mm/min) -#define HOMING_FEEDRATE_MM_M { (50*60), (50*60), (4*60) } +#define HOMING_FEEDRATE_MM_M { (15*60), (15*60), (4*60) } // Validate that endstops are triggered on homing moves #define VALIDATE_HOMING_ENDSTOPS @@ -1672,7 +1630,7 @@ * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) */ -//#define EEPROM_SETTINGS // Persistent storage with M500 and M501 +#define EEPROM_SETTINGS // Persistent storage with M500 and M501 //#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. #define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load @@ -1707,14 +1665,12 @@ // #define PREHEAT_1_LABEL "PLA" #define PREHEAT_1_TEMP_HOTEND 180 -#define PREHEAT_1_TEMP_BED 70 -#define PREHEAT_1_TEMP_CHAMBER 35 +#define PREHEAT_1_TEMP_BED 60 #define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 #define PREHEAT_2_LABEL "ABS" #define PREHEAT_2_TEMP_HOTEND 240 -#define PREHEAT_2_TEMP_BED 110 -#define PREHEAT_2_TEMP_CHAMBER 35 +#define PREHEAT_2_TEMP_BED 80 #define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 /** @@ -1936,7 +1892,7 @@ * SD Card support is disabled by default. If your controller has an SD slot, * you must uncomment the following option or it won't work. */ -//#define SDSUPPORT +#define SDSUPPORT /** * SD CARD: ENABLE CRC @@ -1983,7 +1939,7 @@ // // Set this option if CLOCKWISE causes values to DECREASE // -//#define REVERSE_ENCODER_DIRECTION +#define REVERSE_ENCODER_DIRECTION // // This option reverses the encoder direction for navigating LCD menus. @@ -2006,7 +1962,7 @@ // // Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. // -//#define INDIVIDUAL_AXIS_HOMING_MENU +#define INDIVIDUAL_AXIS_HOMING_MENU // // SPEAKER/BUZZER @@ -2195,7 +2151,7 @@ // RepRapDiscount FULL GRAPHIC Smart Controller // https://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller // -//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER +#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER // // K.3D Full Graphic Smart Controller diff --git a/config/examples/BIBO/TouchX/default/Configuration_adv.h b/config/examples/BIBO/TouchX/default/Configuration_adv.h index 5335fa012a..c812f05eee 100644 --- a/config/examples/BIBO/TouchX/default/Configuration_adv.h +++ b/config/examples/BIBO/TouchX/default/Configuration_adv.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "BIBO/TouchX/default" + /** * Configuration_adv.h * @@ -149,13 +151,6 @@ // // Heated Chamber options // -#if DISABLED(PIDTEMPCHAMBER) - #define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control - #if ENABLED(CHAMBER_LIMIT_SWITCHING) - #define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS - #endif -#endif - #if TEMP_SENSOR_CHAMBER //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) //#define HEATER_CHAMBER_INVERTING false @@ -238,8 +233,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 60 // Seconds + #define THERMAL_PROTECTION_HYSTERESIS 2 // Degrees Celsius //#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops #if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP) @@ -258,7 +253,7 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 20 // Seconds + #define WATCH_TEMP_PERIOD 45 // Seconds #define WATCH_TEMP_INCREASE 2 // Degrees Celsius #endif @@ -266,7 +261,7 @@ * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_BED_PERIOD 40 // Seconds #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius /** @@ -867,7 +862,7 @@ // On a 300mm bed a 5% grade would give a misalignment of ~1.5cm #define G34_MAX_GRADE 5 // (%) Maximum incline that G34 will handle - #define Z_STEPPER_ALIGN_ITERATIONS 5 // Number of iterations to apply during alignment + #define Z_STEPPER_ALIGN_ITERATIONS 3 // Number of iterations to apply during alignment #define Z_STEPPER_ALIGN_ACC 0.02 // Stop iterating early if the accuracy is better than this #define RESTORE_LEVELING_AFTER_G34 // Restore leveling after G34 is done? // After G34, re-home Z (G28 Z) or just calculate it from the last probe heights? @@ -912,7 +907,7 @@ #define AXIS_RELATIVE_MODES { false, false, false, false } // Add a Duplicate option for well-separated conjoined nozzles -//#define MULTI_NOZZLE_DUPLICATION +#define MULTI_NOZZLE_DUPLICATION // By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step. #define INVERT_X_STEP_PIN false diff --git a/config/examples/BIQU/B1-BLTouch/Configuration.h b/config/examples/BIQU/B1-BLTouch/Configuration.h index 78c2dc9160..16e47a2727 100644 --- a/config/examples/BIQU/B1-BLTouch/Configuration.h +++ b/config/examples/BIQU/B1-BLTouch/Configuration.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "BIQU/B1-BLTouch" + /** * Configuration.h * @@ -69,7 +71,7 @@ // @section info // Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes. +#define STRING_CONFIG_H_AUTHOR "(thisiskeithb, BIQU B1 BLTouch)" // Who made the changes. //#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) /** @@ -109,7 +111,7 @@ * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] */ -//#define SERIAL_PORT_2 -1 +#define SERIAL_PORT_2 -1 /** * Select a third serial port on the board to use for communication with the host. @@ -127,18 +129,18 @@ * * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ -#define BAUDRATE 250000 +#define BAUDRATE 115200 // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH // Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_RAMPS_14_EFB + #define MOTHERBOARD BOARD_BTT_SKR_V1_4 #endif // Name displayed in the LCD "Ready" message and Info menu -//#define CUSTOM_MACHINE_NAME "3D Printer" +#define CUSTOM_MACHINE_NAME "BIQU B1" // Printer's unique ID, used by some programs to differentiate between machines. // Choose your own or use a service like https://www.uuidgenerator.net/version4 @@ -424,7 +426,7 @@ #define TEMP_SENSOR_5 0 #define TEMP_SENSOR_6 0 #define TEMP_SENSOR_7 0 -#define TEMP_SENSOR_BED 0 +#define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 #define TEMP_SENSOR_COOLER 0 @@ -480,7 +482,7 @@ #define HEATER_5_MAXTEMP 275 #define HEATER_6_MAXTEMP 275 #define HEATER_7_MAXTEMP 275 -#define BED_MAXTEMP 150 +#define BED_MAXTEMP 120 #define CHAMBER_MAXTEMP 60 /** @@ -505,21 +507,22 @@ #define PID_K1 0.95 // Smoothing factor within any PID loop #if ENABLED(PIDTEMP) - //#define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) - //#define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) + #define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) + #define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) // Set/get with gcode: M301 E[extruder number, 0-2] + // BIQU B1 #if ENABLED(PID_PARAMS_PER_HOTEND) // Specify between 1 and HOTENDS values per array. // If fewer than EXTRUDER values are provided, the last element will be repeated. - #define DEFAULT_Kp_LIST { 22.20, 22.20 } - #define DEFAULT_Ki_LIST { 1.08, 1.08 } - #define DEFAULT_Kd_LIST { 114.00, 114.00 } + #define DEFAULT_Kp_LIST { 23.34, 23.34 } + #define DEFAULT_Ki_LIST { 1.85, 1.85 } + #define DEFAULT_Kd_LIST { 73.55, 73.55 } #else - #define DEFAULT_Kp 22.20 - #define DEFAULT_Ki 1.08 - #define DEFAULT_Kd 114.00 + #define DEFAULT_Kp 23.34 + #define DEFAULT_Ki 1.85 + #define DEFAULT_Kd 73.55 #endif #endif // PIDTEMP @@ -540,7 +543,7 @@ * heater. If your configuration is significantly different than this and you don't understand * the issues involved, don't use bed PID until someone else verifies that your hardware works. */ -//#define PIDTEMPBED +#define PIDTEMPBED //#define BED_LIMIT_SWITCHING @@ -556,11 +559,10 @@ //#define MIN_BED_POWER 0 //#define PID_BED_DEBUG // Sends debug data to the serial port. - // 120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - // from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) - #define DEFAULT_bedKp 10.00 - #define DEFAULT_bedKi .023 - #define DEFAULT_bedKd 305.4 + // BIQU B1 + #define DEFAULT_bedKp 100.65 + #define DEFAULT_bedKi 14.82 + #define DEFAULT_bedKd 455.69 // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. #endif // PIDTEMPBED @@ -634,7 +636,7 @@ * Note: For Bowden Extruders make this large enough to allow load/unload. */ #define PREVENT_LENGTHY_EXTRUDE -#define EXTRUDE_MAXLENGTH 200 +#define EXTRUDE_MAXLENGTH 500 //=========================================================================== //======================== Thermal Runaway Protection ======================= @@ -717,9 +719,9 @@ #endif // Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. +#define X_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Y_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Z_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. #define X_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. #define Y_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. #define Z_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. @@ -743,15 +745,15 @@ * TMC5130, TMC5130_STANDALONE, TMC5160, TMC5160_STANDALONE * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'L6474', 'POWERSTEP01', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2160', 'TMC2160_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC2209', 'TMC2209_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE', 'TMC5160', 'TMC5160_STANDALONE'] */ -#define X_DRIVER_TYPE A4988 -#define Y_DRIVER_TYPE A4988 -#define Z_DRIVER_TYPE A4988 +#define X_DRIVER_TYPE TMC2208 // TMC2225 +#define Y_DRIVER_TYPE TMC2208 // TMC2225 +#define Z_DRIVER_TYPE TMC2208 // TMC2225 //#define X2_DRIVER_TYPE A4988 //#define Y2_DRIVER_TYPE A4988 //#define Z2_DRIVER_TYPE A4988 //#define Z3_DRIVER_TYPE A4988 //#define Z4_DRIVER_TYPE A4988 -#define E0_DRIVER_TYPE A4988 +#define E0_DRIVER_TYPE TMC2208 // TMC2225 //#define E1_DRIVER_TYPE A4988 //#define E2_DRIVER_TYPE A4988 //#define E3_DRIVER_TYPE A4988 @@ -776,7 +778,7 @@ * * :[2,3,4,5,6,7] */ -//#define ENDSTOP_NOISE_THRESHOLD 2 +#define ENDSTOP_NOISE_THRESHOLD 4 // Check for stuck or disconnected endstops during homing moves. //#define DETECT_BROKEN_ENDSTOP @@ -806,14 +808,14 @@ * Override with M92 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 500 } +#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 96 } /** * Default Max Feed Rate (mm/s) * Override with M203 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 } +#define DEFAULT_MAX_FEEDRATE { 500, 500, 5, 25 } //#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 #if ENABLED(LIMITED_MAX_FR_EDITING) @@ -826,7 +828,7 @@ * Override with M201 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 } +#define DEFAULT_MAX_ACCELERATION { 1000, 1000, 100, 5000 } //#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 #if ENABLED(LIMITED_MAX_ACCEL_EDITING) @@ -841,9 +843,9 @@ * M204 R Retract Acceleration * M204 T Travel Acceleration */ -#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves +#define DEFAULT_ACCELERATION 500 // X, Y, Z and E acceleration for printing moves +#define DEFAULT_RETRACT_ACCELERATION 500 // E acceleration for retracts +#define DEFAULT_TRAVEL_ACCELERATION 500 // X, Y, Z acceleration for travel (non printing) moves /** * Default Jerk limits (mm/s) @@ -877,7 +879,7 @@ * https://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html */ #if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.013 // (mm) Distance from real junction edge + #define JUNCTION_DEVIATION_MM 0.08 // (mm) Distance from real junction edge #define JD_HANDLE_SMALL_SEGMENTS // Use curvature estimation instead of just the junction angle // for small segments (< 1mm) with large junction angles (> 135°). #endif @@ -890,7 +892,7 @@ * * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained */ -//#define S_CURVE_ACCELERATION +#define S_CURVE_ACCELERATION //=========================================================================== //============================= Z Probe Options ============================= @@ -906,7 +908,7 @@ * The probe replaces the Z-MIN endstop and is used for Z homing. * (Automatically enables USE_PROBE_FOR_Z_HOMING.) */ -#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN +//#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN // Force the use of the probe for Z-axis homing //#define USE_PROBE_FOR_Z_HOMING @@ -963,7 +965,7 @@ /** * The BLTouch probe uses a Hall effect sensor and emulates a servo. */ -//#define BLTOUCH +#define BLTOUCH /** * Touch-MI Probe by hotends.fr @@ -1055,7 +1057,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +#define NOZZLE_TO_PROBE_OFFSET { 24, -47, -1.5 } // Most probes should stay away from the edges of the bed, but // with NOZZLE_AS_PROBE this can be negative for a wider probing area. @@ -1106,7 +1108,7 @@ * A total of 2 does fast/slow probes with a weighted average. * A total of 3 or more adds more slow probes, taking the average. */ -//#define MULTIPLE_PROBING 2 +#define MULTIPLE_PROBING 2 //#define EXTRA_PROBING 1 /** @@ -1128,7 +1130,7 @@ #define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes //#define Z_AFTER_PROBING 5 // Z position after probing is done -#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping +#define Z_PROBE_LOW_POINT -5 // Farthest distance below the trigger-point to go before stopping // For M851 give a range for adjusting the Z probe offset #define Z_PROBE_OFFSET_RANGE_MIN -20 @@ -1190,14 +1192,14 @@ // @section machine // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR false -#define INVERT_Y_DIR true +#define INVERT_X_DIR true +#define INVERT_Y_DIR false #define INVERT_Z_DIR false // @section extruder // For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR false +#define INVERT_E0_DIR true #define INVERT_E1_DIR false #define INVERT_E2_DIR false #define INVERT_E3_DIR false @@ -1232,16 +1234,16 @@ // @section machine // The size of the printable area -#define X_BED_SIZE 200 -#define Y_BED_SIZE 200 +#define X_BED_SIZE 235 +#define Y_BED_SIZE 235 // Travel limits (mm) after homing, corresponding to endstop positions. #define X_MIN_POS 0 #define Y_MIN_POS 0 #define Z_MIN_POS 0 #define X_MAX_POS X_BED_SIZE -#define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 200 +#define Y_MAX_POS Y_BED_SIZE + 5 +#define Z_MAX_POS 270 /** * Software Endstops @@ -1257,7 +1259,7 @@ #if ENABLED(MIN_SOFTWARE_ENDSTOPS) #define MIN_SOFTWARE_ENDSTOP_X #define MIN_SOFTWARE_ENDSTOP_Y - #define MIN_SOFTWARE_ENDSTOP_Z + //#define MIN_SOFTWARE_ENDSTOP_Z #endif // Max software endstops constrain movement within maximum coordinate bounds @@ -1387,7 +1389,7 @@ */ //#define AUTO_BED_LEVELING_3POINT //#define AUTO_BED_LEVELING_LINEAR -//#define AUTO_BED_LEVELING_BILINEAR +#define AUTO_BED_LEVELING_BILINEAR //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING @@ -1396,7 +1398,7 @@ * these options to restore the prior leveling state or to always enable * leveling immediately after G28. */ -//#define RESTORE_LEVELING_AFTER_G28 +#define RESTORE_LEVELING_AFTER_G28 //#define ENABLE_LEVELING_AFTER_G28 /** @@ -1464,7 +1466,7 @@ // Beyond the probed grid, continue the implied tilt? // Default is to maintain the height of the nearest edge. - //#define EXTRAPOLATE_BEYOND_GRID + #define EXTRAPOLATE_BEYOND_GRID // // Experimental Subdivision of the grid by Catmull-Rom method. @@ -1518,16 +1520,16 @@ * Add a bed leveling sub-menu for ABL or MBL. * Include a guided procedure if manual probing is enabled. */ -//#define LCD_BED_LEVELING +#define LCD_BED_LEVELING #if ENABLED(LCD_BED_LEVELING) #define MESH_EDIT_Z_STEP 0.025 // (mm) Step size while manually probing Z axis. #define LCD_PROBE_Z_RANGE 4 // (mm) Z Range centered on Z_MIN_POS for LCD Z adjustment - //#define MESH_EDIT_MENU // Add a menu to edit mesh points + #define MESH_EDIT_MENU // Add a menu to edit mesh points #endif // Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS +#define LEVEL_BED_CORNERS #if ENABLED(LEVEL_BED_CORNERS) #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets @@ -1672,12 +1674,12 @@ * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) */ -//#define EEPROM_SETTINGS // Persistent storage with M500 and M501 +#define EEPROM_SETTINGS // Persistent storage with M500 and M501 //#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. #define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load #if ENABLED(EEPROM_SETTINGS) - //#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. + #define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. #endif // @@ -1706,17 +1708,23 @@ // Preheat Constants - Up to 5 are supported without changes // #define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 180 -#define PREHEAT_1_TEMP_BED 70 +#define PREHEAT_1_TEMP_HOTEND 190 +#define PREHEAT_1_TEMP_BED 65 #define PREHEAT_1_TEMP_CHAMBER 35 #define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 -#define PREHEAT_2_LABEL "ABS" -#define PREHEAT_2_TEMP_HOTEND 240 -#define PREHEAT_2_TEMP_BED 110 +#define PREHEAT_2_LABEL "PETG" +#define PREHEAT_2_TEMP_HOTEND 235 +#define PREHEAT_2_TEMP_BED 80 #define PREHEAT_2_TEMP_CHAMBER 35 #define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 +#define PREHEAT_3_LABEL "ABS" +#define PREHEAT_3_TEMP_HOTEND 240 +#define PREHEAT_3_TEMP_BED 110 +#define PREHEAT_3_TEMP_CHAMBER 35 +#define PREHEAT_3_FAN_SPEED 0 // Value from 0 to 255 + /** * Nozzle Park * @@ -1728,11 +1736,11 @@ * P1 Raise the nozzle always to Z-park height. * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. */ -//#define NOZZLE_PARK_FEATURE +#define NOZZLE_PARK_FEATURE #if ENABLED(NOZZLE_PARK_FEATURE) // Specify a park position as { X, Y, Z_raise } - #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 } + #define NOZZLE_PARK_POINT { (X_MAX_POS - 10), (Y_MIN_POS + 10), 20 } //#define NOZZLE_PARK_X_ONLY // X move only is required to park //#define NOZZLE_PARK_Y_ONLY // Y move only is required to park #define NOZZLE_PARK_Z_RAISE_MIN 2 // (mm) Always raise Z by at least this distance @@ -1845,7 +1853,7 @@ * * View the current statistics with M78. */ -//#define PRINTCOUNTER +#define PRINTCOUNTER #if ENABLED(PRINTCOUNTER) #define PRINTCOUNTER_SAVE_INTERVAL 60 // (minutes) EEPROM save interval during print #endif @@ -1936,14 +1944,14 @@ * SD Card support is disabled by default. If your controller has an SD slot, * you must uncomment the following option or it won't work. */ -//#define SDSUPPORT +#define SDSUPPORT /** * SD CARD: ENABLE CRC * * Use CRC checks and retries on the SD communication. */ -//#define SD_CHECK_AND_RETRY +#define SD_CHECK_AND_RETRY /** * LCD Menu Items @@ -2006,7 +2014,7 @@ // // Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. // -//#define INDIVIDUAL_AXIS_HOMING_MENU +#define INDIVIDUAL_AXIS_HOMING_MENU // // SPEAKER/BUZZER @@ -2014,7 +2022,7 @@ // If you have a speaker that can produce tones, enable it here. // By default Marlin assumes you have a buzzer with a fixed frequency. // -//#define SPEAKER +#define SPEAKER // // The duration and frequency for the UI feedback sound. @@ -2195,7 +2203,7 @@ // RepRapDiscount FULL GRAPHIC Smart Controller // https://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller // -//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER +#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER // // K.3D Full Graphic Smart Controller @@ -2682,16 +2690,16 @@ #endif // Support for Adafruit NeoPixel LED driver -//#define NEOPIXEL_LED +#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - #define NEOPIXEL_PIN 4 // LED driving pin + #define NEOPIXEL_TYPE NEO_GRB // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_PIXELS 2 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + //#define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE @@ -2731,7 +2739,7 @@ * Set this manually if there are extra servos needing manual control. * Set to 0 to turn off servo support. */ -//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command +#define NUM_SERVOS 1 // Servo index starts with 0 for M280 command // (ms) Delay before the next move will start, to give the servo time to reach its target angle. // 300ms is a good value but you can try less delay. diff --git a/config/examples/BIQU/B1-BLTouch/Configuration_adv.h b/config/examples/BIQU/B1-BLTouch/Configuration_adv.h index 5335fa012a..bb44fad565 100644 --- a/config/examples/BIQU/B1-BLTouch/Configuration_adv.h +++ b/config/examples/BIQU/B1-BLTouch/Configuration_adv.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "BIQU/B1-BLTouch" + /** * Configuration_adv.h * @@ -258,7 +260,7 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 20 // Seconds + #define WATCH_TEMP_PERIOD 40 // Seconds #define WATCH_TEMP_INCREASE 2 // Degrees Celsius #endif @@ -266,13 +268,13 @@ * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_BED_PERIOD 180 // Seconds #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds + #define WATCH_BED_TEMP_PERIOD 180 // Seconds #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius #endif @@ -437,9 +439,9 @@ * Hotend Idle Timeout * Prevent filament in the nozzle from charring and causing a critical jam. */ -//#define HOTEND_IDLE_TIMEOUT +#define HOTEND_IDLE_TIMEOUT #if ENABLED(HOTEND_IDLE_TIMEOUT) - #define HOTEND_IDLE_TIMEOUT_SEC (5*60) // (seconds) Time without extruder movement to trigger protection + #define HOTEND_IDLE_TIMEOUT_SEC (10*60) // (seconds) Time without extruder movement to trigger protection #define HOTEND_IDLE_MIN_TRIGGER 180 // (°C) Minimum temperature to enable hotend protection #define HOTEND_IDLE_NOZZLE_TARGET 0 // (°C) Safe temperature for the nozzle after timeout #define HOTEND_IDLE_BED_TARGET 0 // (°C) Safe temperature for the bed after timeout @@ -496,7 +498,7 @@ * * Define one or both of these to override the default 0-255 range. */ -//#define FAN_MIN_PWM 50 +#define FAN_MIN_PWM 80 //#define FAN_MAX_PWM 128 /** @@ -741,7 +743,7 @@ //#define HOMING_BACKOFF_POST_MM { 2, 2, 2 } // (mm) Backoff from endstops after homing -//#define QUICK_HOME // If G28 contains XY do a diagonal move first +#define QUICK_HOME // If G28 contains XY do a diagonal move first //#define HOME_Y_BEFORE_X // If G28 contains XY home Y before X //#define HOME_Z_FIRST // Home Z first. Requires a Z-MIN endstop (not a probe). //#define CODEPENDENT_XY_HOMING // If X/Y can't home without homing Y/X first @@ -808,10 +810,10 @@ * This feature was designed for Deltabots with very fast Z moves; however, higher speed Cartesians * might be able to use it. If the machine can't raise Z fast enough the BLTouch may go into ALARM. */ - //#define BLTOUCH_HS_MODE + #define BLTOUCH_HS_MODE // Safety: Enable voltage mode settings in the LCD menu. - //#define BLTOUCH_LCD_VOLTAGE_MENU + #define BLTOUCH_LCD_VOLTAGE_MENU #endif // BLTOUCH @@ -942,7 +944,7 @@ // Increase the slowdown divisor for larger buffer sizes. #define SLOWDOWN #if ENABLED(SLOWDOWN) - #define SLOWDOWN_DIVISOR 2 + #define SLOWDOWN_DIVISOR 4 #endif /** @@ -1059,7 +1061,7 @@ * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the * lowest stepping frequencies. */ -//#define ADAPTIVE_STEP_SMOOTHING +#define ADAPTIVE_STEP_SMOOTHING /** * Custom Microstepping @@ -1160,7 +1162,7 @@ // Add Probe Z Offset calibration to the Z Probe Offsets menu #if HAS_BED_PROBE - //#define PROBE_OFFSET_WIZARD + #define PROBE_OFFSET_WIZARD #if ENABLED(PROBE_OFFSET_WIZARD) // // Enable to init the Probe Z-Offset when starting the Wizard. @@ -1170,12 +1172,12 @@ //#define PROBE_OFFSET_WIZARD_START_Z -4.0 // Set a convenient position to do the calibration (probing point and nozzle/bed-distance) - //#define PROBE_OFFSET_WIZARD_XY_POS { X_CENTER, Y_CENTER } + #define PROBE_OFFSET_WIZARD_XY_POS { X_CENTER, Y_CENTER } #endif #endif // Include a page of printer information in the LCD Main Menu - //#define LCD_INFO_MENU + #define LCD_INFO_MENU #if ENABLED(LCD_INFO_MENU) //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages #endif @@ -1190,7 +1192,7 @@ * LED Control Menu * Add LED Control to the LCD menu */ - //#define LED_CONTROL_MENU + #define LED_CONTROL_MENU #if ENABLED(LED_CONTROL_MENU) #define LED_COLOR_PRESETS // Enable the Preset Color menu option //#define NEO2_COLOR_PRESETS // Enable a second NeoPixel Preset Color menu option @@ -1229,23 +1231,23 @@ #endif // Scroll a longer status message into view - //#define STATUS_MESSAGE_SCROLLING + #define STATUS_MESSAGE_SCROLLING // On the Info Screen, display XY with one decimal place when possible //#define LCD_DECIMAL_SMALL_XY // Add an 'M73' G-code to set the current percentage - //#define LCD_SET_PROGRESS_MANUALLY + #define LCD_SET_PROGRESS_MANUALLY // Show the E position (filament used) during printing //#define LCD_SHOW_E_TOTAL #endif #if EITHER(SDSUPPORT, LCD_SET_PROGRESS_MANUALLY) && ANY(HAS_MARLINUI_U8GLIB, HAS_MARLINUI_HD44780, IS_TFTGLCD_PANEL, EXTENSIBLE_UI) - //#define SHOW_REMAINING_TIME // Display estimated time to completion + #define SHOW_REMAINING_TIME // Display estimated time to completion #if ENABLED(SHOW_REMAINING_TIME) //#define USE_M73_REMAINING_TIME // Use remaining time from M73 command instead of estimation - //#define ROTATE_PROGRESS_DISPLAY // Display (P)rogress, (E)lapsed, and (R)emaining time + #define ROTATE_PROGRESS_DISPLAY // Display (P)rogress, (E)lapsed, and (R)emaining time #endif #if EITHER(HAS_MARLINUI_U8GLIB, EXTENSIBLE_UI) @@ -1301,7 +1303,7 @@ //#define BROWSE_MEDIA_ON_INSERT // Open the file browser when media is inserted - #define EVENT_GCODE_SD_ABORT "G28XY" // G-code to run on SD Abort Print (e.g., "G28XY" or "G27") + #define EVENT_GCODE_SD_ABORT "G28XY\nM84" // G-code to run on Stop Print (e.g., "G28XY" or "G27") #if ENABLED(PRINTER_EVENT_LEDS) #define PE_LEDS_COMPLETED_TIME (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination @@ -1361,17 +1363,17 @@ * - SDSORT_CACHE_NAMES will retain the sorted file listing in RAM. (Expensive!) * - SDSORT_DYNAMIC_RAM only uses RAM when the SD menu is visible. (Use with caution!) */ - //#define SDCARD_SORT_ALPHA + #define SDCARD_SORT_ALPHA // SD Card Sorting options #if ENABLED(SDCARD_SORT_ALPHA) #define SDSORT_LIMIT 40 // Maximum number of sorted items (10-256). Costs 27 bytes each. #define FOLDER_SORTING -1 // -1=above 0=none 1=below #define SDSORT_GCODE false // Allow turning sorting on/off with LCD and M34 G-code. - #define SDSORT_USES_RAM false // Pre-allocate a static array for faster pre-sorting. + #define SDSORT_USES_RAM true // Pre-allocate a static array for faster pre-sorting. #define SDSORT_USES_STACK false // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.) - #define SDSORT_CACHE_NAMES false // Keep sorted items in RAM longer for speedy performance. Most expensive option. - #define SDSORT_DYNAMIC_RAM false // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use! + #define SDSORT_CACHE_NAMES true // Keep sorted items in RAM longer for speedy performance. Most expensive option. + #define SDSORT_DYNAMIC_RAM true // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use! #define SDSORT_CACHE_VFATS 2 // Maximum number of 13-byte VFAT entries to use for sorting. // Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM. #endif @@ -1381,10 +1383,10 @@ //#define UTF_FILENAME_SUPPORT // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT + #define LONG_FILENAME_HOST_SUPPORT // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES + #define SCROLL_LONG_FILENAMES // Leave the heaters on after Stop Print (not recommended!) //#define SD_ABORT_NO_COOLDOWN @@ -1406,7 +1408,7 @@ /** * Auto-report SdCard status with M27 S */ - //#define AUTO_REPORT_SD_STATUS + #define AUTO_REPORT_SD_STATUS /** * Support for USB thumb drives using an Arduino USB Host Shield or @@ -1476,7 +1478,7 @@ * * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] */ - //#define SDCARD_CONNECTION LCD + #define SDCARD_CONNECTION LCD // Enable if SD detect is rendered useless (e.g., by using an SD extender) //#define NO_SD_DETECT @@ -1512,7 +1514,7 @@ */ #if HAS_MARLINUI_U8GLIB // Show SD percentage next to the progress bar - //#define DOGM_SD_PERCENT + #define DOGM_SD_PERCENT // Save many cycles by drawing a hollow frame or no frame on the Info Screen //#define XYZ_NO_FRAME @@ -1572,7 +1574,7 @@ //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames - //#define STATUS_HEAT_PERCENT // Show heating in a progress bar + #define STATUS_HEAT_PERCENT // Show heating in a progress bar //#define BOOT_MARLIN_LOGO_ANIMATED // Animated Marlin logo. Costs ~‭3260 (or ~940) bytes of PROGMEM. // Frivolous Game Options @@ -1790,7 +1792,7 @@ * * Warning: Does not respect endstops! */ -//#define BABYSTEPPING +#define BABYSTEPPING #if ENABLED(BABYSTEPPING) //#define INTEGRATED_BABYSTEPPING // EXPERIMENTAL integration of babystepping into the Stepper ISR //#define BABYSTEP_WITHOUT_HOMING @@ -1798,16 +1800,16 @@ //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way //#define BABYSTEP_MILLIMETER_UNITS // Specify BABYSTEP_MULTIPLICATOR_(XY|Z) in mm instead of micro-steps - #define BABYSTEP_MULTIPLICATOR_Z 1 // (steps or mm) Steps or millimeter distance for each Z babystep + #define BABYSTEP_MULTIPLICATOR_Z 5 // (steps or mm) Steps or millimeter distance for each Z babystep #define BABYSTEP_MULTIPLICATOR_XY 1 // (steps or mm) Steps or millimeter distance for each XY babystep - //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. + #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. // Note: Extra time may be added to mitigate controller latency. - //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on doubleclick when printer is idle. + #define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on doubleclick when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) - #define MOVE_Z_IDLE_MULTIPLICATOR 1 // Multiply 1mm by this factor for the move step size. + #define MOVE_Z_IDLE_MULTIPLICATOR 2 // Multiply 1mm by this factor for the move step size. #endif #endif @@ -1883,7 +1885,7 @@ //#define PROBING_MARGIN_LEFT PROBING_MARGIN //#define PROBING_MARGIN_RIGHT PROBING_MARGIN //#define PROBING_MARGIN_FRONT PROBING_MARGIN - //#define PROBING_MARGIN_BACK PROBING_MARGIN + #define PROBING_MARGIN_BACK 60 #endif #if EITHER(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL) @@ -2082,7 +2084,7 @@ #if BOTH(SDSUPPORT, DIRECT_STEPPING) #define BLOCK_BUFFER_SIZE 8 #elif ENABLED(SDSUPPORT) - #define BLOCK_BUFFER_SIZE 16 + #define BLOCK_BUFFER_SIZE 32 #else #define BLOCK_BUFFER_SIZE 16 #endif @@ -2091,7 +2093,7 @@ // The ASCII buffer for serial input #define MAX_CMD_SIZE 96 -#define BUFSIZE 4 +#define BUFSIZE 32 // Transmission to Host Buffer Size // To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0. @@ -2100,7 +2102,7 @@ // For debug-echo: 128 bytes for the optimal speed. // Other output doesn't need to be that speedy. // :[0, 2, 4, 8, 16, 32, 64, 128, 256] -#define TX_BUFFER_SIZE 0 +#define TX_BUFFER_SIZE 32 // Host Receive Buffer Size // Without XON/XOFF flow control (see SERIAL_XON_XOFF below) 32 bytes should be enough. @@ -2141,7 +2143,7 @@ * Currently handles M108, M112, M410, M876 * NOTE: Not yet implemented for all platforms. */ -//#define EMERGENCY_PARSER +#define EMERGENCY_PARSER /** * Realtime Reporting (requires EMERGENCY_PARSER) @@ -2177,7 +2179,7 @@ #define SERIAL_OVERRUN_PROTECTION // For serial echo, the number of digits after the decimal point -//#define SERIAL_FLOAT_PRECISION 4 +#define SERIAL_FLOAT_PRECISION 4 // @section extras @@ -2311,27 +2313,27 @@ * * Enable PARK_HEAD_ON_PAUSE to add the G-code M125 Pause and Park. */ -//#define ADVANCED_PAUSE_FEATURE +#define ADVANCED_PAUSE_FEATURE #if ENABLED(ADVANCED_PAUSE_FEATURE) - #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. + #define PAUSE_PARK_RETRACT_FEEDRATE 30 // (mm/s) Initial retract feedrate. #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. // This short retract is done immediately, before parking the nozzle. - #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast. + #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 30 // (mm/s) Unload filament feedrate. This can be pretty fast. #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload. + #define FILAMENT_CHANGE_UNLOAD_LENGTH 450 // (mm) The length of filament for a complete unload. // For Bowden, the full length of the tube and nozzle. // For direct drive, the full length of the nozzle. // Set to 0 for manual unloading. #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE 6 // (mm/s) Slow move when starting load. - #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 0 // (mm) Slow length, to allow time to insert material. + #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 25 // (mm) Slow length, to allow time to insert material. // 0 to disable start loading and skip to fast load only - #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast. + #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 25 // (mm/s) Load filament feedrate. This can be pretty fast. #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle. + #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 350 // (mm) Load length of filament, from extruder gear to nozzle. // For Bowden, the full length of the tube and nozzle. // For direct drive, the full length of the nozzle. //#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted. - #define ADVANCED_PAUSE_PURGE_FEEDRATE 3 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate. + #define ADVANCED_PAUSE_PURGE_FEEDRATE 5 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate. #define ADVANCED_PAUSE_PURGE_LENGTH 50 // (mm) Length to extrude after loading. // Set to 0 for manual extrusion. // Filament can be extruded repeatedly from the Filament Change menu @@ -2349,10 +2351,10 @@ #define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed. #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change. - //#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. - //#define HOME_BEFORE_FILAMENT_CHANGE // If needed, home before parking for filament change + #define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. + #define HOME_BEFORE_FILAMENT_CHANGE // If needed, home before parking for filament change - //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. + #define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) #endif @@ -2565,7 +2567,7 @@ #endif #if AXIS_IS_TMC(E0) - #define E0_CURRENT 800 + #define E0_CURRENT 950 #define E0_MICROSTEPS 16 #define E0_RSENSE 0.11 #define E0_CHAIN_POS -1 @@ -2719,7 +2721,7 @@ * Define your own with: * { , , hysteresis_start[1..8] } */ - #define CHOPPER_TIMING CHOPPER_DEFAULT_12V // All axes (override below) + #define CHOPPER_TIMING CHOPPER_DEFAULT_24V // All axes (override below) //#define CHOPPER_TIMING_X CHOPPER_TIMING // For X Axes (override below) //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X //#define CHOPPER_TIMING_Y CHOPPER_TIMING // For Y Axes (override below) @@ -3426,7 +3428,7 @@ */ #define EXTENDED_CAPABILITIES_REPORT #if ENABLED(EXTENDED_CAPABILITIES_REPORT) - //#define M115_GEOMETRY_REPORT + #define M115_GEOMETRY_REPORT #endif /** @@ -3474,11 +3476,11 @@ //#define NO_WORKSPACE_OFFSETS // Extra options for the M114 "Current Position" report -//#define M114_DETAIL // Use 'M114` for details to check planner calculations +#define M114_DETAIL // Use 'M114` for details to check planner calculations //#define M114_REALTIME // Real current position based on forward kinematics //#define M114_LEGACY // M114 used to synchronize on every call. Enable if needed. -//#define REPORT_FAN_CHANGE // Report the new fan speed when changed by M106 (and others) +#define REPORT_FAN_CHANGE // Report the new fan speed when changed by M106 (and others) /** * Set the number of proportional font spaces required to fill up a typical character space. @@ -3650,9 +3652,9 @@ * Host Prompt Support enables Marlin to use the host for user prompts so * filament runout and other processes can be managed from the host side. */ -//#define HOST_ACTION_COMMANDS +#define HOST_ACTION_COMMANDS #if ENABLED(HOST_ACTION_COMMANDS) - //#define HOST_PROMPT_SUPPORT + #define HOST_PROMPT_SUPPORT //#define HOST_START_MENU_ITEM // Add a menu item that tells the host to start #endif diff --git a/config/examples/BIQU/B1/Configuration.h b/config/examples/BIQU/B1/Configuration.h index 78c2dc9160..adf0720a13 100644 --- a/config/examples/BIQU/B1/Configuration.h +++ b/config/examples/BIQU/B1/Configuration.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "BIQU/B1" + /** * Configuration.h * @@ -69,7 +71,7 @@ // @section info // Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes. +#define STRING_CONFIG_H_AUTHOR "(thisiskeithb, BIQU B1)" // Who made the changes. //#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) /** @@ -109,7 +111,7 @@ * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] */ -//#define SERIAL_PORT_2 -1 +#define SERIAL_PORT_2 -1 /** * Select a third serial port on the board to use for communication with the host. @@ -127,18 +129,18 @@ * * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ -#define BAUDRATE 250000 +#define BAUDRATE 115200 // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH // Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_RAMPS_14_EFB + #define MOTHERBOARD BOARD_BTT_SKR_V1_4 #endif // Name displayed in the LCD "Ready" message and Info menu -//#define CUSTOM_MACHINE_NAME "3D Printer" +#define CUSTOM_MACHINE_NAME "BIQU B1" // Printer's unique ID, used by some programs to differentiate between machines. // Choose your own or use a service like https://www.uuidgenerator.net/version4 @@ -424,7 +426,7 @@ #define TEMP_SENSOR_5 0 #define TEMP_SENSOR_6 0 #define TEMP_SENSOR_7 0 -#define TEMP_SENSOR_BED 0 +#define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 #define TEMP_SENSOR_COOLER 0 @@ -480,7 +482,7 @@ #define HEATER_5_MAXTEMP 275 #define HEATER_6_MAXTEMP 275 #define HEATER_7_MAXTEMP 275 -#define BED_MAXTEMP 150 +#define BED_MAXTEMP 120 #define CHAMBER_MAXTEMP 60 /** @@ -505,21 +507,22 @@ #define PID_K1 0.95 // Smoothing factor within any PID loop #if ENABLED(PIDTEMP) - //#define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) - //#define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) + #define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) + #define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) // Set/get with gcode: M301 E[extruder number, 0-2] + // BIQU B1 #if ENABLED(PID_PARAMS_PER_HOTEND) // Specify between 1 and HOTENDS values per array. // If fewer than EXTRUDER values are provided, the last element will be repeated. - #define DEFAULT_Kp_LIST { 22.20, 22.20 } - #define DEFAULT_Ki_LIST { 1.08, 1.08 } - #define DEFAULT_Kd_LIST { 114.00, 114.00 } + #define DEFAULT_Kp_LIST { 23.34, 23.34 } + #define DEFAULT_Ki_LIST { 1.85, 1.85 } + #define DEFAULT_Kd_LIST { 73.55, 73.55 } #else - #define DEFAULT_Kp 22.20 - #define DEFAULT_Ki 1.08 - #define DEFAULT_Kd 114.00 + #define DEFAULT_Kp 23.34 + #define DEFAULT_Ki 1.85 + #define DEFAULT_Kd 73.55 #endif #endif // PIDTEMP @@ -540,7 +543,7 @@ * heater. If your configuration is significantly different than this and you don't understand * the issues involved, don't use bed PID until someone else verifies that your hardware works. */ -//#define PIDTEMPBED +#define PIDTEMPBED //#define BED_LIMIT_SWITCHING @@ -556,11 +559,10 @@ //#define MIN_BED_POWER 0 //#define PID_BED_DEBUG // Sends debug data to the serial port. - // 120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - // from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) - #define DEFAULT_bedKp 10.00 - #define DEFAULT_bedKi .023 - #define DEFAULT_bedKd 305.4 + // BIQU B1 + #define DEFAULT_bedKp 100.65 + #define DEFAULT_bedKi 14.82 + #define DEFAULT_bedKd 455.69 // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. #endif // PIDTEMPBED @@ -634,7 +636,7 @@ * Note: For Bowden Extruders make this large enough to allow load/unload. */ #define PREVENT_LENGTHY_EXTRUDE -#define EXTRUDE_MAXLENGTH 200 +#define EXTRUDE_MAXLENGTH 500 //=========================================================================== //======================== Thermal Runaway Protection ======================= @@ -717,9 +719,9 @@ #endif // Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. +#define X_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Y_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Z_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. #define X_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. #define Y_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. #define Z_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. @@ -743,15 +745,15 @@ * TMC5130, TMC5130_STANDALONE, TMC5160, TMC5160_STANDALONE * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'L6474', 'POWERSTEP01', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2160', 'TMC2160_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC2209', 'TMC2209_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE', 'TMC5160', 'TMC5160_STANDALONE'] */ -#define X_DRIVER_TYPE A4988 -#define Y_DRIVER_TYPE A4988 -#define Z_DRIVER_TYPE A4988 +#define X_DRIVER_TYPE TMC2208 // TMC2225 +#define Y_DRIVER_TYPE TMC2208 // TMC2225 +#define Z_DRIVER_TYPE TMC2208 // TMC2225 //#define X2_DRIVER_TYPE A4988 //#define Y2_DRIVER_TYPE A4988 //#define Z2_DRIVER_TYPE A4988 //#define Z3_DRIVER_TYPE A4988 //#define Z4_DRIVER_TYPE A4988 -#define E0_DRIVER_TYPE A4988 +#define E0_DRIVER_TYPE TMC2208 // TMC2225 //#define E1_DRIVER_TYPE A4988 //#define E2_DRIVER_TYPE A4988 //#define E3_DRIVER_TYPE A4988 @@ -776,7 +778,7 @@ * * :[2,3,4,5,6,7] */ -//#define ENDSTOP_NOISE_THRESHOLD 2 +#define ENDSTOP_NOISE_THRESHOLD 4 // Check for stuck or disconnected endstops during homing moves. //#define DETECT_BROKEN_ENDSTOP @@ -806,14 +808,14 @@ * Override with M92 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 500 } +#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 96 } /** * Default Max Feed Rate (mm/s) * Override with M203 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 } +#define DEFAULT_MAX_FEEDRATE { 500, 500, 5, 25 } //#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 #if ENABLED(LIMITED_MAX_FR_EDITING) @@ -826,7 +828,7 @@ * Override with M201 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 } +#define DEFAULT_MAX_ACCELERATION { 1000, 1000, 100, 5000 } //#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 #if ENABLED(LIMITED_MAX_ACCEL_EDITING) @@ -841,9 +843,9 @@ * M204 R Retract Acceleration * M204 T Travel Acceleration */ -#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves +#define DEFAULT_ACCELERATION 500 // X, Y, Z and E acceleration for printing moves +#define DEFAULT_RETRACT_ACCELERATION 500 // E acceleration for retracts +#define DEFAULT_TRAVEL_ACCELERATION 500 // X, Y, Z acceleration for travel (non printing) moves /** * Default Jerk limits (mm/s) @@ -877,7 +879,7 @@ * https://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html */ #if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.013 // (mm) Distance from real junction edge + #define JUNCTION_DEVIATION_MM 0.08 // (mm) Distance from real junction edge #define JD_HANDLE_SMALL_SEGMENTS // Use curvature estimation instead of just the junction angle // for small segments (< 1mm) with large junction angles (> 135°). #endif @@ -890,7 +892,7 @@ * * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained */ -//#define S_CURVE_ACCELERATION +#define S_CURVE_ACCELERATION //=========================================================================== //============================= Z Probe Options ============================= @@ -1055,7 +1057,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +#define NOZZLE_TO_PROBE_OFFSET { 24, -47, -1.5 } // Most probes should stay away from the edges of the bed, but // with NOZZLE_AS_PROBE this can be negative for a wider probing area. @@ -1190,14 +1192,14 @@ // @section machine // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR false -#define INVERT_Y_DIR true +#define INVERT_X_DIR true +#define INVERT_Y_DIR false #define INVERT_Z_DIR false // @section extruder // For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR false +#define INVERT_E0_DIR true #define INVERT_E1_DIR false #define INVERT_E2_DIR false #define INVERT_E3_DIR false @@ -1232,16 +1234,16 @@ // @section machine // The size of the printable area -#define X_BED_SIZE 200 -#define Y_BED_SIZE 200 +#define X_BED_SIZE 235 +#define Y_BED_SIZE 235 // Travel limits (mm) after homing, corresponding to endstop positions. #define X_MIN_POS 0 #define Y_MIN_POS 0 #define Z_MIN_POS 0 #define X_MAX_POS X_BED_SIZE -#define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 200 +#define Y_MAX_POS Y_BED_SIZE + 5 +#define Z_MAX_POS 270 /** * Software Endstops @@ -1389,14 +1391,14 @@ //#define AUTO_BED_LEVELING_LINEAR //#define AUTO_BED_LEVELING_BILINEAR //#define AUTO_BED_LEVELING_UBL -//#define MESH_BED_LEVELING +#define MESH_BED_LEVELING /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable * leveling immediately after G28. */ -//#define RESTORE_LEVELING_AFTER_G28 +#define RESTORE_LEVELING_AFTER_G28 //#define ENABLE_LEVELING_AFTER_G28 /** @@ -1464,7 +1466,7 @@ // Beyond the probed grid, continue the implied tilt? // Default is to maintain the height of the nearest edge. - //#define EXTRAPOLATE_BEYOND_GRID + #define EXTRAPOLATE_BEYOND_GRID // // Experimental Subdivision of the grid by Catmull-Rom method. @@ -1518,16 +1520,16 @@ * Add a bed leveling sub-menu for ABL or MBL. * Include a guided procedure if manual probing is enabled. */ -//#define LCD_BED_LEVELING +#define LCD_BED_LEVELING #if ENABLED(LCD_BED_LEVELING) #define MESH_EDIT_Z_STEP 0.025 // (mm) Step size while manually probing Z axis. #define LCD_PROBE_Z_RANGE 4 // (mm) Z Range centered on Z_MIN_POS for LCD Z adjustment - //#define MESH_EDIT_MENU // Add a menu to edit mesh points + #define MESH_EDIT_MENU // Add a menu to edit mesh points #endif // Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS +#define LEVEL_BED_CORNERS #if ENABLED(LEVEL_BED_CORNERS) #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets @@ -1672,12 +1674,12 @@ * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) */ -//#define EEPROM_SETTINGS // Persistent storage with M500 and M501 +#define EEPROM_SETTINGS // Persistent storage with M500 and M501 //#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. #define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load #if ENABLED(EEPROM_SETTINGS) - //#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. + #define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. #endif // @@ -1706,17 +1708,23 @@ // Preheat Constants - Up to 5 are supported without changes // #define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 180 -#define PREHEAT_1_TEMP_BED 70 +#define PREHEAT_1_TEMP_HOTEND 190 +#define PREHEAT_1_TEMP_BED 65 #define PREHEAT_1_TEMP_CHAMBER 35 #define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 -#define PREHEAT_2_LABEL "ABS" -#define PREHEAT_2_TEMP_HOTEND 240 -#define PREHEAT_2_TEMP_BED 110 +#define PREHEAT_2_LABEL "PETG" +#define PREHEAT_2_TEMP_HOTEND 235 +#define PREHEAT_2_TEMP_BED 80 #define PREHEAT_2_TEMP_CHAMBER 35 #define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 +#define PREHEAT_3_LABEL "ABS" +#define PREHEAT_3_TEMP_HOTEND 240 +#define PREHEAT_3_TEMP_BED 110 +#define PREHEAT_3_TEMP_CHAMBER 35 +#define PREHEAT_3_FAN_SPEED 0 // Value from 0 to 255 + /** * Nozzle Park * @@ -1728,11 +1736,11 @@ * P1 Raise the nozzle always to Z-park height. * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. */ -//#define NOZZLE_PARK_FEATURE +#define NOZZLE_PARK_FEATURE #if ENABLED(NOZZLE_PARK_FEATURE) // Specify a park position as { X, Y, Z_raise } - #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 } + #define NOZZLE_PARK_POINT { (X_MAX_POS - 10), (Y_MIN_POS + 10), 20 } //#define NOZZLE_PARK_X_ONLY // X move only is required to park //#define NOZZLE_PARK_Y_ONLY // Y move only is required to park #define NOZZLE_PARK_Z_RAISE_MIN 2 // (mm) Always raise Z by at least this distance @@ -1845,7 +1853,7 @@ * * View the current statistics with M78. */ -//#define PRINTCOUNTER +#define PRINTCOUNTER #if ENABLED(PRINTCOUNTER) #define PRINTCOUNTER_SAVE_INTERVAL 60 // (minutes) EEPROM save interval during print #endif @@ -1936,14 +1944,14 @@ * SD Card support is disabled by default. If your controller has an SD slot, * you must uncomment the following option or it won't work. */ -//#define SDSUPPORT +#define SDSUPPORT /** * SD CARD: ENABLE CRC * * Use CRC checks and retries on the SD communication. */ -//#define SD_CHECK_AND_RETRY +#define SD_CHECK_AND_RETRY /** * LCD Menu Items @@ -2006,7 +2014,7 @@ // // Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. // -//#define INDIVIDUAL_AXIS_HOMING_MENU +#define INDIVIDUAL_AXIS_HOMING_MENU // // SPEAKER/BUZZER @@ -2014,7 +2022,7 @@ // If you have a speaker that can produce tones, enable it here. // By default Marlin assumes you have a buzzer with a fixed frequency. // -//#define SPEAKER +#define SPEAKER // // The duration and frequency for the UI feedback sound. @@ -2195,7 +2203,7 @@ // RepRapDiscount FULL GRAPHIC Smart Controller // https://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller // -//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER +#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER // // K.3D Full Graphic Smart Controller @@ -2682,16 +2690,16 @@ #endif // Support for Adafruit NeoPixel LED driver -//#define NEOPIXEL_LED +#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - #define NEOPIXEL_PIN 4 // LED driving pin + #define NEOPIXEL_TYPE NEO_GRB // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_PIXELS 2 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + //#define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE diff --git a/config/examples/BIQU/B1/Configuration_adv.h b/config/examples/BIQU/B1/Configuration_adv.h index 5335fa012a..851c54625a 100644 --- a/config/examples/BIQU/B1/Configuration_adv.h +++ b/config/examples/BIQU/B1/Configuration_adv.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "BIQU/B1" + /** * Configuration_adv.h * @@ -258,7 +260,7 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 20 // Seconds + #define WATCH_TEMP_PERIOD 40 // Seconds #define WATCH_TEMP_INCREASE 2 // Degrees Celsius #endif @@ -266,13 +268,13 @@ * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_BED_PERIOD 180 // Seconds #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds + #define WATCH_BED_TEMP_PERIOD 180 // Seconds #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius #endif @@ -437,9 +439,9 @@ * Hotend Idle Timeout * Prevent filament in the nozzle from charring and causing a critical jam. */ -//#define HOTEND_IDLE_TIMEOUT +#define HOTEND_IDLE_TIMEOUT #if ENABLED(HOTEND_IDLE_TIMEOUT) - #define HOTEND_IDLE_TIMEOUT_SEC (5*60) // (seconds) Time without extruder movement to trigger protection + #define HOTEND_IDLE_TIMEOUT_SEC (10*60) // (seconds) Time without extruder movement to trigger protection #define HOTEND_IDLE_MIN_TRIGGER 180 // (°C) Minimum temperature to enable hotend protection #define HOTEND_IDLE_NOZZLE_TARGET 0 // (°C) Safe temperature for the nozzle after timeout #define HOTEND_IDLE_BED_TARGET 0 // (°C) Safe temperature for the bed after timeout @@ -496,7 +498,7 @@ * * Define one or both of these to override the default 0-255 range. */ -//#define FAN_MIN_PWM 50 +#define FAN_MIN_PWM 80 //#define FAN_MAX_PWM 128 /** @@ -741,7 +743,7 @@ //#define HOMING_BACKOFF_POST_MM { 2, 2, 2 } // (mm) Backoff from endstops after homing -//#define QUICK_HOME // If G28 contains XY do a diagonal move first +#define QUICK_HOME // If G28 contains XY do a diagonal move first //#define HOME_Y_BEFORE_X // If G28 contains XY home Y before X //#define HOME_Z_FIRST // Home Z first. Requires a Z-MIN endstop (not a probe). //#define CODEPENDENT_XY_HOMING // If X/Y can't home without homing Y/X first @@ -942,7 +944,7 @@ // Increase the slowdown divisor for larger buffer sizes. #define SLOWDOWN #if ENABLED(SLOWDOWN) - #define SLOWDOWN_DIVISOR 2 + #define SLOWDOWN_DIVISOR 4 #endif /** @@ -1059,7 +1061,7 @@ * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the * lowest stepping frequencies. */ -//#define ADAPTIVE_STEP_SMOOTHING +#define ADAPTIVE_STEP_SMOOTHING /** * Custom Microstepping @@ -1175,7 +1177,7 @@ #endif // Include a page of printer information in the LCD Main Menu - //#define LCD_INFO_MENU + #define LCD_INFO_MENU #if ENABLED(LCD_INFO_MENU) //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages #endif @@ -1190,7 +1192,7 @@ * LED Control Menu * Add LED Control to the LCD menu */ - //#define LED_CONTROL_MENU + #define LED_CONTROL_MENU #if ENABLED(LED_CONTROL_MENU) #define LED_COLOR_PRESETS // Enable the Preset Color menu option //#define NEO2_COLOR_PRESETS // Enable a second NeoPixel Preset Color menu option @@ -1229,23 +1231,23 @@ #endif // Scroll a longer status message into view - //#define STATUS_MESSAGE_SCROLLING + #define STATUS_MESSAGE_SCROLLING // On the Info Screen, display XY with one decimal place when possible //#define LCD_DECIMAL_SMALL_XY // Add an 'M73' G-code to set the current percentage - //#define LCD_SET_PROGRESS_MANUALLY + #define LCD_SET_PROGRESS_MANUALLY // Show the E position (filament used) during printing //#define LCD_SHOW_E_TOTAL #endif #if EITHER(SDSUPPORT, LCD_SET_PROGRESS_MANUALLY) && ANY(HAS_MARLINUI_U8GLIB, HAS_MARLINUI_HD44780, IS_TFTGLCD_PANEL, EXTENSIBLE_UI) - //#define SHOW_REMAINING_TIME // Display estimated time to completion + #define SHOW_REMAINING_TIME // Display estimated time to completion #if ENABLED(SHOW_REMAINING_TIME) //#define USE_M73_REMAINING_TIME // Use remaining time from M73 command instead of estimation - //#define ROTATE_PROGRESS_DISPLAY // Display (P)rogress, (E)lapsed, and (R)emaining time + #define ROTATE_PROGRESS_DISPLAY // Display (P)rogress, (E)lapsed, and (R)emaining time #endif #if EITHER(HAS_MARLINUI_U8GLIB, EXTENSIBLE_UI) @@ -1301,7 +1303,7 @@ //#define BROWSE_MEDIA_ON_INSERT // Open the file browser when media is inserted - #define EVENT_GCODE_SD_ABORT "G28XY" // G-code to run on SD Abort Print (e.g., "G28XY" or "G27") + #define EVENT_GCODE_SD_ABORT "G28XY\nM84" // G-code to run on Stop Print (e.g., "G28XY" or "G27") #if ENABLED(PRINTER_EVENT_LEDS) #define PE_LEDS_COMPLETED_TIME (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination @@ -1361,17 +1363,17 @@ * - SDSORT_CACHE_NAMES will retain the sorted file listing in RAM. (Expensive!) * - SDSORT_DYNAMIC_RAM only uses RAM when the SD menu is visible. (Use with caution!) */ - //#define SDCARD_SORT_ALPHA + #define SDCARD_SORT_ALPHA // SD Card Sorting options #if ENABLED(SDCARD_SORT_ALPHA) #define SDSORT_LIMIT 40 // Maximum number of sorted items (10-256). Costs 27 bytes each. #define FOLDER_SORTING -1 // -1=above 0=none 1=below #define SDSORT_GCODE false // Allow turning sorting on/off with LCD and M34 G-code. - #define SDSORT_USES_RAM false // Pre-allocate a static array for faster pre-sorting. + #define SDSORT_USES_RAM true // Pre-allocate a static array for faster pre-sorting. #define SDSORT_USES_STACK false // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.) - #define SDSORT_CACHE_NAMES false // Keep sorted items in RAM longer for speedy performance. Most expensive option. - #define SDSORT_DYNAMIC_RAM false // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use! + #define SDSORT_CACHE_NAMES true // Keep sorted items in RAM longer for speedy performance. Most expensive option. + #define SDSORT_DYNAMIC_RAM true // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use! #define SDSORT_CACHE_VFATS 2 // Maximum number of 13-byte VFAT entries to use for sorting. // Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM. #endif @@ -1381,10 +1383,10 @@ //#define UTF_FILENAME_SUPPORT // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT + #define LONG_FILENAME_HOST_SUPPORT // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES + #define SCROLL_LONG_FILENAMES // Leave the heaters on after Stop Print (not recommended!) //#define SD_ABORT_NO_COOLDOWN @@ -1406,7 +1408,7 @@ /** * Auto-report SdCard status with M27 S */ - //#define AUTO_REPORT_SD_STATUS + #define AUTO_REPORT_SD_STATUS /** * Support for USB thumb drives using an Arduino USB Host Shield or @@ -1476,7 +1478,7 @@ * * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] */ - //#define SDCARD_CONNECTION LCD + #define SDCARD_CONNECTION LCD // Enable if SD detect is rendered useless (e.g., by using an SD extender) //#define NO_SD_DETECT @@ -1512,7 +1514,7 @@ */ #if HAS_MARLINUI_U8GLIB // Show SD percentage next to the progress bar - //#define DOGM_SD_PERCENT + #define DOGM_SD_PERCENT // Save many cycles by drawing a hollow frame or no frame on the Info Screen //#define XYZ_NO_FRAME @@ -1572,7 +1574,7 @@ //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames - //#define STATUS_HEAT_PERCENT // Show heating in a progress bar + #define STATUS_HEAT_PERCENT // Show heating in a progress bar //#define BOOT_MARLIN_LOGO_ANIMATED // Animated Marlin logo. Costs ~‭3260 (or ~940) bytes of PROGMEM. // Frivolous Game Options @@ -1790,7 +1792,7 @@ * * Warning: Does not respect endstops! */ -//#define BABYSTEPPING +#define BABYSTEPPING #if ENABLED(BABYSTEPPING) //#define INTEGRATED_BABYSTEPPING // EXPERIMENTAL integration of babystepping into the Stepper ISR //#define BABYSTEP_WITHOUT_HOMING @@ -1798,16 +1800,16 @@ //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way //#define BABYSTEP_MILLIMETER_UNITS // Specify BABYSTEP_MULTIPLICATOR_(XY|Z) in mm instead of micro-steps - #define BABYSTEP_MULTIPLICATOR_Z 1 // (steps or mm) Steps or millimeter distance for each Z babystep + #define BABYSTEP_MULTIPLICATOR_Z 5 // (steps or mm) Steps or millimeter distance for each Z babystep #define BABYSTEP_MULTIPLICATOR_XY 1 // (steps or mm) Steps or millimeter distance for each XY babystep - //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. + #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. // Note: Extra time may be added to mitigate controller latency. - //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on doubleclick when printer is idle. + #define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on doubleclick when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) - #define MOVE_Z_IDLE_MULTIPLICATOR 1 // Multiply 1mm by this factor for the move step size. + #define MOVE_Z_IDLE_MULTIPLICATOR 2 // Multiply 1mm by this factor for the move step size. #endif #endif @@ -1883,7 +1885,7 @@ //#define PROBING_MARGIN_LEFT PROBING_MARGIN //#define PROBING_MARGIN_RIGHT PROBING_MARGIN //#define PROBING_MARGIN_FRONT PROBING_MARGIN - //#define PROBING_MARGIN_BACK PROBING_MARGIN + #define PROBING_MARGIN_BACK 60 #endif #if EITHER(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL) @@ -2082,7 +2084,7 @@ #if BOTH(SDSUPPORT, DIRECT_STEPPING) #define BLOCK_BUFFER_SIZE 8 #elif ENABLED(SDSUPPORT) - #define BLOCK_BUFFER_SIZE 16 + #define BLOCK_BUFFER_SIZE 32 #else #define BLOCK_BUFFER_SIZE 16 #endif @@ -2091,7 +2093,7 @@ // The ASCII buffer for serial input #define MAX_CMD_SIZE 96 -#define BUFSIZE 4 +#define BUFSIZE 32 // Transmission to Host Buffer Size // To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0. @@ -2100,7 +2102,7 @@ // For debug-echo: 128 bytes for the optimal speed. // Other output doesn't need to be that speedy. // :[0, 2, 4, 8, 16, 32, 64, 128, 256] -#define TX_BUFFER_SIZE 0 +#define TX_BUFFER_SIZE 32 // Host Receive Buffer Size // Without XON/XOFF flow control (see SERIAL_XON_XOFF below) 32 bytes should be enough. @@ -2141,7 +2143,7 @@ * Currently handles M108, M112, M410, M876 * NOTE: Not yet implemented for all platforms. */ -//#define EMERGENCY_PARSER +#define EMERGENCY_PARSER /** * Realtime Reporting (requires EMERGENCY_PARSER) @@ -2177,7 +2179,7 @@ #define SERIAL_OVERRUN_PROTECTION // For serial echo, the number of digits after the decimal point -//#define SERIAL_FLOAT_PRECISION 4 +#define SERIAL_FLOAT_PRECISION 4 // @section extras @@ -2311,27 +2313,27 @@ * * Enable PARK_HEAD_ON_PAUSE to add the G-code M125 Pause and Park. */ -//#define ADVANCED_PAUSE_FEATURE +#define ADVANCED_PAUSE_FEATURE #if ENABLED(ADVANCED_PAUSE_FEATURE) - #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. + #define PAUSE_PARK_RETRACT_FEEDRATE 30 // (mm/s) Initial retract feedrate. #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. // This short retract is done immediately, before parking the nozzle. - #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast. + #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 30 // (mm/s) Unload filament feedrate. This can be pretty fast. #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload. + #define FILAMENT_CHANGE_UNLOAD_LENGTH 450 // (mm) The length of filament for a complete unload. // For Bowden, the full length of the tube and nozzle. // For direct drive, the full length of the nozzle. // Set to 0 for manual unloading. #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE 6 // (mm/s) Slow move when starting load. - #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 0 // (mm) Slow length, to allow time to insert material. + #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 25 // (mm) Slow length, to allow time to insert material. // 0 to disable start loading and skip to fast load only - #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast. + #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 25 // (mm/s) Load filament feedrate. This can be pretty fast. #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle. + #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 350 // (mm) Load length of filament, from extruder gear to nozzle. // For Bowden, the full length of the tube and nozzle. // For direct drive, the full length of the nozzle. //#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted. - #define ADVANCED_PAUSE_PURGE_FEEDRATE 3 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate. + #define ADVANCED_PAUSE_PURGE_FEEDRATE 5 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate. #define ADVANCED_PAUSE_PURGE_LENGTH 50 // (mm) Length to extrude after loading. // Set to 0 for manual extrusion. // Filament can be extruded repeatedly from the Filament Change menu @@ -2349,10 +2351,10 @@ #define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed. #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change. - //#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. - //#define HOME_BEFORE_FILAMENT_CHANGE // If needed, home before parking for filament change + #define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. + #define HOME_BEFORE_FILAMENT_CHANGE // If needed, home before parking for filament change - //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. + #define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) #endif @@ -2565,7 +2567,7 @@ #endif #if AXIS_IS_TMC(E0) - #define E0_CURRENT 800 + #define E0_CURRENT 950 #define E0_MICROSTEPS 16 #define E0_RSENSE 0.11 #define E0_CHAIN_POS -1 @@ -2719,7 +2721,7 @@ * Define your own with: * { , , hysteresis_start[1..8] } */ - #define CHOPPER_TIMING CHOPPER_DEFAULT_12V // All axes (override below) + #define CHOPPER_TIMING CHOPPER_DEFAULT_24V // All axes (override below) //#define CHOPPER_TIMING_X CHOPPER_TIMING // For X Axes (override below) //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X //#define CHOPPER_TIMING_Y CHOPPER_TIMING // For Y Axes (override below) @@ -3426,7 +3428,7 @@ */ #define EXTENDED_CAPABILITIES_REPORT #if ENABLED(EXTENDED_CAPABILITIES_REPORT) - //#define M115_GEOMETRY_REPORT + #define M115_GEOMETRY_REPORT #endif /** @@ -3474,11 +3476,11 @@ //#define NO_WORKSPACE_OFFSETS // Extra options for the M114 "Current Position" report -//#define M114_DETAIL // Use 'M114` for details to check planner calculations +#define M114_DETAIL // Use 'M114` for details to check planner calculations //#define M114_REALTIME // Real current position based on forward kinematics //#define M114_LEGACY // M114 used to synchronize on every call. Enable if needed. -//#define REPORT_FAN_CHANGE // Report the new fan speed when changed by M106 (and others) +#define REPORT_FAN_CHANGE // Report the new fan speed when changed by M106 (and others) /** * Set the number of proportional font spaces required to fill up a typical character space. @@ -3650,9 +3652,9 @@ * Host Prompt Support enables Marlin to use the host for user prompts so * filament runout and other processes can be managed from the host side. */ -//#define HOST_ACTION_COMMANDS +#define HOST_ACTION_COMMANDS #if ENABLED(HOST_ACTION_COMMANDS) - //#define HOST_PROMPT_SUPPORT + #define HOST_PROMPT_SUPPORT //#define HOST_START_MENU_ITEM // Add a menu item that tells the host to start #endif diff --git a/config/examples/BQ/Hephestos/Configuration.h b/config/examples/BQ/Hephestos/Configuration.h index 78c2dc9160..4925535b54 100644 --- a/config/examples/BQ/Hephestos/Configuration.h +++ b/config/examples/BQ/Hephestos/Configuration.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "BQ/Hephestos" + /** * Configuration.h * @@ -127,7 +129,7 @@ * * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ -#define BAUDRATE 250000 +#define BAUDRATE 115200 // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH @@ -138,7 +140,7 @@ #endif // Name displayed in the LCD "Ready" message and Info menu -//#define CUSTOM_MACHINE_NAME "3D Printer" +#define CUSTOM_MACHINE_NAME "HEPHESTOS" // Printer's unique ID, used by some programs to differentiate between machines. // Choose your own or use a service like https://www.uuidgenerator.net/version4 @@ -318,7 +320,7 @@ * Enable and connect the power supply to the PS_ON_PIN. * Specify whether the power supply is active HIGH or active LOW. */ -//#define PSU_CONTROL +#define PSU_CONTROL //#define PSU_NAME "Power Supply" #if ENABLED(PSU_CONTROL) @@ -448,7 +450,7 @@ #define TEMP_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer #define TEMP_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target -#define TEMP_BED_RESIDENCY_TIME 10 // (seconds) Time to wait for bed to "settle" in M190 +#define TEMP_BED_RESIDENCY_TIME 0 // (seconds) Time to wait for bed to "settle" in M190 #define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer #define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target @@ -472,14 +474,14 @@ // Above this temperature the heater will be switched off. // This can protect components from overheating, but NOT from shorts and failures. // (Use MINTEMP for thermistor short/failure protection.) -#define HEATER_0_MAXTEMP 275 -#define HEATER_1_MAXTEMP 275 -#define HEATER_2_MAXTEMP 275 -#define HEATER_3_MAXTEMP 275 -#define HEATER_4_MAXTEMP 275 -#define HEATER_5_MAXTEMP 275 -#define HEATER_6_MAXTEMP 275 -#define HEATER_7_MAXTEMP 275 +#define HEATER_0_MAXTEMP 260 +#define HEATER_1_MAXTEMP 260 +#define HEATER_2_MAXTEMP 260 +#define HEATER_3_MAXTEMP 260 +#define HEATER_4_MAXTEMP 260 +#define HEATER_5_MAXTEMP 260 +#define HEATER_6_MAXTEMP 260 +#define HEATER_7_MAXTEMP 260 #define BED_MAXTEMP 150 #define CHAMBER_MAXTEMP 60 @@ -510,16 +512,17 @@ //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) // Set/get with gcode: M301 E[extruder number, 0-2] + // Hephestos i3 #if ENABLED(PID_PARAMS_PER_HOTEND) // Specify between 1 and HOTENDS values per array. // If fewer than EXTRUDER values are provided, the last element will be repeated. - #define DEFAULT_Kp_LIST { 22.20, 22.20 } - #define DEFAULT_Ki_LIST { 1.08, 1.08 } - #define DEFAULT_Kd_LIST { 114.00, 114.00 } + #define DEFAULT_Kp_LIST { 23.05, 23.05 } + #define DEFAULT_Ki_LIST { 2.00, 2.00 } + #define DEFAULT_Kd_LIST { 66.47, 66.47 } #else - #define DEFAULT_Kp 22.20 - #define DEFAULT_Ki 1.08 - #define DEFAULT_Kd 114.00 + #define DEFAULT_Kp 23.05 + #define DEFAULT_Ki 2.00 + #define DEFAULT_Kd 66.47 #endif #endif // PIDTEMP @@ -717,13 +720,13 @@ #endif // Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define X_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_PROBE_ENDSTOP_INVERTING false // Set to true to invert the logic of the probe. +#define X_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Y_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Z_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define X_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Y_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Z_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Z_MIN_PROBE_ENDSTOP_INVERTING true // Set to true to invert the logic of the probe. /** * Stepper Drivers @@ -806,14 +809,14 @@ * Override with M92 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 500 } +#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 4000, 100.47095761381482 } /** * Default Max Feed Rate (mm/s) * Override with M203 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 } +#define DEFAULT_MAX_FEEDRATE { 200, 200, 3.3, 25 } //#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 #if ENABLED(LIMITED_MAX_FR_EDITING) @@ -826,7 +829,7 @@ * Override with M201 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 } +#define DEFAULT_MAX_ACCELERATION { 1100, 1100, 100, 10000 } //#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 #if ENABLED(LIMITED_MAX_ACCEL_EDITING) @@ -841,9 +844,9 @@ * M204 R Retract Acceleration * M204 T Travel Acceleration */ -#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves +#define DEFAULT_ACCELERATION 650 // X, Y, Z and E acceleration for printing moves +#define DEFAULT_RETRACT_ACCELERATION 1000 // E acceleration for retracts +#define DEFAULT_TRAVEL_ACCELERATION 1000 // X, Y, Z acceleration for travel (non printing) moves /** * Default Jerk limits (mm/s) @@ -877,7 +880,7 @@ * https://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html */ #if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.013 // (mm) Distance from real junction edge + #define JUNCTION_DEVIATION_MM 0.062 // (mm) Distance from real junction edge #define JD_HANDLE_SMALL_SEGMENTS // Use curvature estimation instead of just the junction angle // for small segments (< 1mm) with large junction angles (> 135°). #endif @@ -906,7 +909,7 @@ * The probe replaces the Z-MIN endstop and is used for Z homing. * (Automatically enables USE_PROBE_FOR_Z_HOMING.) */ -#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN +//#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN // Force the use of the probe for Z-axis homing //#define USE_PROBE_FOR_Z_HOMING @@ -1055,7 +1058,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +#define NOZZLE_TO_PROBE_OFFSET { -25, -29, -12.35 } // Most probes should stay away from the edges of the bed, but // with NOZZLE_AS_PROBE this can be negative for a wider probing area. @@ -1065,7 +1068,7 @@ #define XY_PROBE_FEEDRATE (133*60) // Feedrate (mm/min) for the first approach when double-probing (MULTIPLE_PROBING == 2) -#define Z_PROBE_FEEDRATE_FAST (4*60) +#define Z_PROBE_FEEDRATE_FAST 150 // Feedrate (mm/min) for the "accurate" probe of each point #define Z_PROBE_FEEDRATE_SLOW (Z_PROBE_FEEDRATE_FAST / 2) @@ -1123,7 +1126,7 @@ * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. */ -#define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow +#define Z_CLEARANCE_DEPLOY_PROBE 15 // Z Clearance for Deploy/Stow #define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points #define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes //#define Z_AFTER_PROBING 5 // Z position after probing is done @@ -1190,9 +1193,9 @@ // @section machine // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR false -#define INVERT_Y_DIR true -#define INVERT_Z_DIR false +#define INVERT_X_DIR true +#define INVERT_Y_DIR false +#define INVERT_Z_DIR true // @section extruder @@ -1232,8 +1235,8 @@ // @section machine // The size of the printable area -#define X_BED_SIZE 200 -#define Y_BED_SIZE 200 +#define X_BED_SIZE 215 +#define Y_BED_SIZE 210 // Travel limits (mm) after homing, corresponding to endstop positions. #define X_MIN_POS 0 @@ -1241,7 +1244,7 @@ #define Z_MIN_POS 0 #define X_MAX_POS X_BED_SIZE #define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 200 +#define Z_MAX_POS 180 /** * Software Endstops @@ -1595,7 +1598,7 @@ #endif // Homing speeds (mm/min) -#define HOMING_FEEDRATE_MM_M { (50*60), (50*60), (4*60) } +#define HOMING_FEEDRATE_MM_M { 2000, 2000, 150 } // Validate that endstops are triggered on homing moves #define VALIDATE_HOMING_ENDSTOPS @@ -1706,16 +1709,16 @@ // Preheat Constants - Up to 5 are supported without changes // #define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 180 -#define PREHEAT_1_TEMP_BED 70 +#define PREHEAT_1_TEMP_HOTEND 200 +#define PREHEAT_1_TEMP_BED 0 #define PREHEAT_1_TEMP_CHAMBER 35 -#define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 +#define PREHEAT_1_FAN_SPEED 255 // Value from 0 to 255 #define PREHEAT_2_LABEL "ABS" -#define PREHEAT_2_TEMP_HOTEND 240 -#define PREHEAT_2_TEMP_BED 110 +#define PREHEAT_2_TEMP_HOTEND 220 +#define PREHEAT_2_TEMP_BED 100 #define PREHEAT_2_TEMP_CHAMBER 35 -#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 +#define PREHEAT_2_FAN_SPEED 255 // Value from 0 to 255 /** * Nozzle Park @@ -1936,7 +1939,7 @@ * SD Card support is disabled by default. If your controller has an SD slot, * you must uncomment the following option or it won't work. */ -//#define SDSUPPORT +#define SDSUPPORT /** * SD CARD: ENABLE CRC @@ -2037,7 +2040,7 @@ // // Note: Usually sold with a white PCB. // -//#define REPRAP_DISCOUNT_SMART_CONTROLLER +#define REPRAP_DISCOUNT_SMART_CONTROLLER // // GT2560 (YHCB2004) LCD Display diff --git a/config/examples/BQ/Hephestos/Configuration_adv.h b/config/examples/BQ/Hephestos/Configuration_adv.h index 5335fa012a..e33c892a96 100644 --- a/config/examples/BQ/Hephestos/Configuration_adv.h +++ b/config/examples/BQ/Hephestos/Configuration_adv.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "BQ/Hephestos" + /** * Configuration_adv.h * @@ -867,7 +869,7 @@ // On a 300mm bed a 5% grade would give a misalignment of ~1.5cm #define G34_MAX_GRADE 5 // (%) Maximum incline that G34 will handle - #define Z_STEPPER_ALIGN_ITERATIONS 5 // Number of iterations to apply during alignment + #define Z_STEPPER_ALIGN_ITERATIONS 3 // Number of iterations to apply during alignment #define Z_STEPPER_ALIGN_ACC 0.02 // Stop iterating early if the accuracy is better than this #define RESTORE_LEVELING_AFTER_G34 // Restore leveling after G34 is done? // After G34, re-home Z (G28 Z) or just calculate it from the last probe heights? @@ -925,7 +927,7 @@ * Set DISABLE_INACTIVE_? 'true' to shut down axis steppers after an idle period. * The Deactive Time can be overridden with M18 and M84. Set to 0 for No Timeout. */ -#define DEFAULT_STEPPER_DEACTIVE_TIME 120 +#define DEFAULT_STEPPER_DEACTIVE_TIME 60 #define DISABLE_INACTIVE_X true #define DISABLE_INACTIVE_Y true #define DISABLE_INACTIVE_Z true // Set 'false' if the nozzle could fall onto your printed part! @@ -1134,7 +1136,7 @@ // @section lcd #if EITHER(IS_ULTIPANEL, EXTENSIBLE_UI) - #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel + #define MANUAL_FEEDRATE { 120*60, 120*60, 18*60, 60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines #if IS_ULTIPANEL #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position" @@ -3562,12 +3564,12 @@ #define MAIN_MENU_ITEM_2_GCODE "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND) //#define MAIN_MENU_ITEM_2_CONFIRM - //#define MAIN_MENU_ITEM_3_DESC "Preheat for " PREHEAT_2_LABEL - //#define MAIN_MENU_ITEM_3_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) + #define MAIN_MENU_ITEM_3_DESC "Preheat for " PREHEAT_2_LABEL + #define MAIN_MENU_ITEM_3_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) //#define MAIN_MENU_ITEM_3_CONFIRM - //#define MAIN_MENU_ITEM_4_DESC "Heat Bed/Home/Level" - //#define MAIN_MENU_ITEM_4_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29" + #define MAIN_MENU_ITEM_4_DESC "Heat Bed/Home/Level" + #define MAIN_MENU_ITEM_4_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29" //#define MAIN_MENU_ITEM_4_CONFIRM //#define MAIN_MENU_ITEM_5_DESC "Home & Info" diff --git a/config/examples/BQ/Hephestos_2/Configuration.h b/config/examples/BQ/Hephestos_2/Configuration.h index 78c2dc9160..c1f356920e 100644 --- a/config/examples/BQ/Hephestos_2/Configuration.h +++ b/config/examples/BQ/Hephestos_2/Configuration.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "BQ/Hephestos_2" + /** * Configuration.h * @@ -42,6 +44,14 @@ //=========================================================================== /** + * BQ Hephestos 2 Configuration + * + * This configuration supports the standard Hephestos 2 with or without the + * heated bed kit featured at https://store.bq.com/en/heated-bed-kit-hephestos2 + * + * Enable HEPHESTOS2_HEATED_BED_KIT in Configuration_adv.h for all functionality + * related to the heated bed. + * * Here are some useful links to help get your machine configured and calibrated: * * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all @@ -69,7 +79,7 @@ // @section info // Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes. +#define STRING_CONFIG_H_AUTHOR "@jbrazio" // Who made the changes. //#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) /** @@ -87,7 +97,7 @@ #define SHOW_BOOTSCREEN // Show the bitmap in Marlin/_Bootscreen.h on startup. -//#define SHOW_CUSTOM_BOOTSCREEN +#define SHOW_CUSTOM_BOOTSCREEN // Show the bitmap in Marlin/_Statusscreen.h on the status screen. //#define CUSTOM_STATUS_SCREEN_IMAGE @@ -127,22 +137,22 @@ * * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ -#define BAUDRATE 250000 +#define BAUDRATE 115200 // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH // Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_RAMPS_14_EFB + #define MOTHERBOARD BOARD_BQ_ZUM_MEGA_3D #endif // Name displayed in the LCD "Ready" message and Info menu -//#define CUSTOM_MACHINE_NAME "3D Printer" +#define CUSTOM_MACHINE_NAME "BQ Hephestos 2" // Printer's unique ID, used by some programs to differentiate between machines. // Choose your own or use a service like https://www.uuidgenerator.net/version4 -//#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" +#define MACHINE_UUID "8d083632-40c5-4649-85b8-43d9ae6c5d55" // BQ Hephestos 2 standard config // @section extruder @@ -416,7 +426,7 @@ * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. */ -#define TEMP_SENSOR_0 1 +#define TEMP_SENSOR_0 70 #define TEMP_SENSOR_1 0 #define TEMP_SENSOR_2 0 #define TEMP_SENSOR_3 0 @@ -472,7 +482,7 @@ // Above this temperature the heater will be switched off. // This can protect components from overheating, but NOT from shorts and failures. // (Use MINTEMP for thermistor short/failure protection.) -#define HEATER_0_MAXTEMP 275 +#define HEATER_0_MAXTEMP 230 #define HEATER_1_MAXTEMP 275 #define HEATER_2_MAXTEMP 275 #define HEATER_3_MAXTEMP 275 @@ -480,7 +490,7 @@ #define HEATER_5_MAXTEMP 275 #define HEATER_6_MAXTEMP 275 #define HEATER_7_MAXTEMP 275 -#define BED_MAXTEMP 150 +#define BED_MAXTEMP 100 #define CHAMBER_MAXTEMP 60 /** @@ -513,13 +523,19 @@ #if ENABLED(PID_PARAMS_PER_HOTEND) // Specify between 1 and HOTENDS values per array. // If fewer than EXTRUDER values are provided, the last element will be repeated. - #define DEFAULT_Kp_LIST { 22.20, 22.20 } - #define DEFAULT_Ki_LIST { 1.08, 1.08 } - #define DEFAULT_Kd_LIST { 114.00, 114.00 } + #define DEFAULT_Kp_LIST { 23.75, 23.75 } + #define DEFAULT_Ki_LIST { 2.12, 2.12 } + #define DEFAULT_Kd_LIST { 66.63, 66.63 } #else - #define DEFAULT_Kp 22.20 - #define DEFAULT_Ki 1.08 - #define DEFAULT_Kd 114.00 + // Tuned PID values using M303 + #define DEFAULT_Kp 23.75 + #define DEFAULT_Ki 2.12 + #define DEFAULT_Kd 66.63 + + // BQ firmware stock PID values + //#define DEFAULT_Kp 10.70 + //#define DEFAULT_Ki 0.45 + //#define DEFAULT_Kd 3.00 #endif #endif // PIDTEMP @@ -717,12 +733,12 @@ #endif // Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. +#define X_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Y_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. #define Z_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define X_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. +#define X_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Y_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Z_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. #define Z_MIN_PROBE_ENDSTOP_INVERTING false // Set to true to invert the logic of the probe. /** @@ -762,7 +778,7 @@ // Enable this feature if all enabled endstop pins are interrupt-capable. // This will remove the need to poll the interrupt pins, saving many CPU cycles. -//#define ENDSTOP_INTERRUPTS_FEATURE +#define ENDSTOP_INTERRUPTS_FEATURE /** * Endstop Noise Threshold @@ -806,14 +822,14 @@ * Override with M92 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 500 } +#define DEFAULT_AXIS_STEPS_PER_UNIT { 160, 160, 8000, 218.77 } /** * Default Max Feed Rate (mm/s) * Override with M203 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 } +#define DEFAULT_MAX_FEEDRATE { 300, 300, 3, 120 } //#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 #if ENABLED(LIMITED_MAX_FR_EDITING) @@ -826,7 +842,7 @@ * Override with M201 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 } +#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 3000 } //#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 #if ENABLED(LIMITED_MAX_ACCEL_EDITING) @@ -841,9 +857,9 @@ * M204 R Retract Acceleration * M204 T Travel Acceleration */ -#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves +#define DEFAULT_ACCELERATION 900 // X, Y, Z and E acceleration for printing moves +#define DEFAULT_RETRACT_ACCELERATION 1300 // E acceleration for retracts +#define DEFAULT_TRAVEL_ACCELERATION 1500 // X, Y, Z acceleration for travel (non printing) moves /** * Default Jerk limits (mm/s) @@ -855,8 +871,8 @@ */ //#define CLASSIC_JERK #if ENABLED(CLASSIC_JERK) - #define DEFAULT_XJERK 10.0 - #define DEFAULT_YJERK 10.0 + #define DEFAULT_XJERK 5.0 + #define DEFAULT_YJERK 5.0 #define DEFAULT_ZJERK 0.3 //#define TRAVEL_EXTRA_XYJERK 0.0 // Additional jerk allowance for all travel moves @@ -867,7 +883,7 @@ #endif #endif -#define DEFAULT_EJERK 5.0 // May be used by Linear Advance +#define DEFAULT_EJERK 10.0 // May be used by Linear Advance /** * Junction Deviation Factor @@ -877,7 +893,7 @@ * https://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html */ #if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.013 // (mm) Distance from real junction edge + #define JUNCTION_DEVIATION_MM 0.011 // (mm) Distance from real junction edge #define JD_HANDLE_SMALL_SEGMENTS // Use curvature estimation instead of just the junction angle // for small segments (< 1mm) with large junction angles (> 135°). #endif @@ -946,7 +962,7 @@ * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. * (e.g., an inductive probe or a nozzle-based probe-switch.) */ -//#define FIX_MOUNTED_PROBE +#define FIX_MOUNTED_PROBE /** * Use the nozzle as the probe, as with a conductive @@ -1055,7 +1071,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +#define NOZZLE_TO_PROBE_OFFSET { 34, 15, 0 } // Most probes should stay away from the edges of the bed, but // with NOZZLE_AS_PROBE this can be negative for a wider probing area. @@ -1123,8 +1139,8 @@ * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. */ -#define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow -#define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points +#define Z_CLEARANCE_DEPLOY_PROBE 0 // Z Clearance for Deploy/Stow +#define Z_CLEARANCE_BETWEEN_PROBES 2 // Z Clearance between probe points #define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes //#define Z_AFTER_PROBING 5 // Z position after probing is done @@ -1132,7 +1148,7 @@ // For M851 give a range for adjusting the Z probe offset #define Z_PROBE_OFFSET_RANGE_MIN -20 -#define Z_PROBE_OFFSET_RANGE_MAX 20 +#define Z_PROBE_OFFSET_RANGE_MAX 20 // Enable the M48 repeatability test to test probe accuracy //#define Z_MIN_PROBE_REPEATABILITY_TEST @@ -1190,14 +1206,14 @@ // @section machine // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR false +#define INVERT_X_DIR true #define INVERT_Y_DIR true -#define INVERT_Z_DIR false +#define INVERT_Z_DIR true // @section extruder // For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR false +#define INVERT_E0_DIR true #define INVERT_E1_DIR false #define INVERT_E2_DIR false #define INVERT_E3_DIR false @@ -1208,8 +1224,8 @@ // @section homing -//#define NO_MOTION_BEFORE_HOMING // Inhibit movement until all axes have been homed. Also enable HOME_AFTER_DEACTIVATE for extra safety. -//#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated. Also enable NO_MOTION_BEFORE_HOMING for extra safety. +#define NO_MOTION_BEFORE_HOMING // Inhibit movement until all axes have been homed. Also enable HOME_AFTER_DEACTIVATE for extra safety. +#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated. Also enable NO_MOTION_BEFORE_HOMING for extra safety. /** * Set Z_IDLE_HEIGHT if the Z-Axis moves on its own when steppers are disabled. @@ -1218,7 +1234,7 @@ */ //#define Z_IDLE_HEIGHT Z_HOME_POS -//#define Z_HOMING_HEIGHT 4 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ... +//#define Z_HOMING_HEIGHT 3 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ... // Be sure to have this much clearance over your Z_MAX_POS to prevent grinding. //#define Z_AFTER_HOMING 10 // (mm) Height to move to after homing Z @@ -1232,8 +1248,8 @@ // @section machine // The size of the printable area -#define X_BED_SIZE 200 -#define Y_BED_SIZE 200 +#define X_BED_SIZE 210 +#define Y_BED_SIZE 297 // Travel limits (mm) after homing, corresponding to endstop positions. #define X_MIN_POS 0 @@ -1241,7 +1257,7 @@ #define Z_MIN_POS 0 #define X_MAX_POS X_BED_SIZE #define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 200 +#define Z_MAX_POS 210 /** * Software Endstops @@ -1387,7 +1403,7 @@ */ //#define AUTO_BED_LEVELING_3POINT //#define AUTO_BED_LEVELING_LINEAR -//#define AUTO_BED_LEVELING_BILINEAR +#define AUTO_BED_LEVELING_BILINEAR //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING @@ -1442,8 +1458,8 @@ #if ENABLED(G26_MESH_VALIDATION) #define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle. #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for G26. - #define MESH_TEST_HOTEND_TEMP 205 // (°C) Default nozzle temperature for G26. - #define MESH_TEST_BED_TEMP 60 // (°C) Default bed temperature for G26. + #define MESH_TEST_HOTEND_TEMP 185 // (°C) Default nozzle temperature for G26. + #define MESH_TEST_BED_TEMP 50 // (°C) Defaultbed temperature for G26. #define G26_XY_FEEDRATE 20 // (mm/s) Feedrate for G26 XY moves. #define G26_XY_FEEDRATE_TRAVEL 100 // (mm/s) Feedrate for G26 XY travel moves. #define G26_RETRACT_MULTIPLIER 1.0 // G26 Q (retraction) used by default between mesh test elements. @@ -1454,7 +1470,7 @@ #if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR) // Set the number of grid points per dimension. - #define GRID_MAX_POINTS_X 3 + #define GRID_MAX_POINTS_X 5 #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X // Probe along the Y axis, advancing X after each column @@ -1464,7 +1480,7 @@ // Beyond the probed grid, continue the implied tilt? // Default is to maintain the height of the nearest edge. - //#define EXTRAPOLATE_BEYOND_GRID + #define EXTRAPOLATE_BEYOND_GRID // // Experimental Subdivision of the grid by Catmull-Rom method. @@ -1565,7 +1581,7 @@ * Commands to execute at the end of G29 probing. * Useful to retract or move the Z probe out of the way. */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" +#define Z_PROBE_END_SCRIPT "G27 P0" // @section homing @@ -1587,7 +1603,7 @@ // - Move the Z probe (or nozzle) to a defined XY point before Z Homing. // - Prevent Z homing when the Z probe is outside bed area. // -//#define Z_SAFE_HOMING +#define Z_SAFE_HOMING #if ENABLED(Z_SAFE_HOMING) #define Z_SAFE_HOMING_X_POINT X_CENTER // X point for Z homing @@ -1672,7 +1688,7 @@ * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) */ -//#define EEPROM_SETTINGS // Persistent storage with M500 and M501 +#define EEPROM_SETTINGS // Persistent storage with M500 and M501 //#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. #define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load @@ -1687,7 +1703,7 @@ // every couple of seconds when it can't accept commands. // #define HOST_KEEPALIVE_FEATURE // Disable this if your host doesn't like keepalive messages -#define DEFAULT_KEEPALIVE_INTERVAL 2 // Number of seconds between "busy" messages. Set with M113. +#define DEFAULT_KEEPALIVE_INTERVAL 5 // Number of seconds between "busy" messages. Set with M113. #define BUSY_WHILE_HEATING // Some hosts require "busy" messages even during heating // @@ -1707,13 +1723,13 @@ // #define PREHEAT_1_LABEL "PLA" #define PREHEAT_1_TEMP_HOTEND 180 -#define PREHEAT_1_TEMP_BED 70 +#define PREHEAT_1_TEMP_BED 50 #define PREHEAT_1_TEMP_CHAMBER 35 #define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 #define PREHEAT_2_LABEL "ABS" -#define PREHEAT_2_TEMP_HOTEND 240 -#define PREHEAT_2_TEMP_BED 110 +#define PREHEAT_2_TEMP_HOTEND 210 +#define PREHEAT_2_TEMP_BED 60 #define PREHEAT_2_TEMP_CHAMBER 35 #define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 @@ -1728,11 +1744,11 @@ * P1 Raise the nozzle always to Z-park height. * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. */ -//#define NOZZLE_PARK_FEATURE +#define NOZZLE_PARK_FEATURE #if ENABLED(NOZZLE_PARK_FEATURE) // Specify a park position as { X, Y, Z_raise } - #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 } + #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 10 } //#define NOZZLE_PARK_X_ONLY // X move only is required to park //#define NOZZLE_PARK_Y_ONLY // Y move only is required to park #define NOZZLE_PARK_Z_RAISE_MIN 2 // (mm) Always raise Z by at least this distance @@ -1845,7 +1861,7 @@ * * View the current statistics with M78. */ -//#define PRINTCOUNTER +#define PRINTCOUNTER #if ENABLED(PRINTCOUNTER) #define PRINTCOUNTER_SAVE_INTERVAL 60 // (minutes) EEPROM save interval during print #endif @@ -1936,7 +1952,7 @@ * SD Card support is disabled by default. If your controller has an SD slot, * you must uncomment the following option or it won't work. */ -//#define SDSUPPORT +#define SDSUPPORT /** * SD CARD: ENABLE CRC @@ -1960,13 +1976,13 @@ // This option overrides the default number of encoder pulses needed to // produce one step. Should be increased for high-resolution encoders. // -//#define ENCODER_PULSES_PER_STEP 4 +#define ENCODER_PULSES_PER_STEP 1 // // Use this option to override the number of step signals required to // move between next/prev menu items. // -//#define ENCODER_STEPS_PER_MENU_ITEM 1 +#define ENCODER_STEPS_PER_MENU_ITEM 5 /** * Encoder Direction Options @@ -2238,7 +2254,7 @@ // BQ LCD Smart Controller shipped by // default with the BQ Hephestos 2 and Witbox 2. // -//#define BQ_LCD_SMART_CONTROLLER +#define BQ_LCD_SMART_CONTROLLER // // Cartesio UI @@ -2613,12 +2629,12 @@ //#define NUM_M106_FANS 1 // Increase the FAN PWM frequency. Removes the PWM noise but increases heating in the FET/Arduino -//#define FAST_PWM_FAN +#define FAST_PWM_FAN // Use software PWM to drive the fan, as for the heaters. This uses a very low frequency // which is not as annoying as with the hardware PWM. On the other hand, if this frequency // is too low, you should also increment SOFT_PWM_SCALE. -//#define FAN_SOFT_PWM +#define FAN_SOFT_PWM // Incrementing this by 1 will double the software PWM frequency, // affecting heaters, and the fan if FAN_SOFT_PWM is enabled. diff --git a/config/examples/BQ/Hephestos_2/Configuration_adv.h b/config/examples/BQ/Hephestos_2/Configuration_adv.h index 5335fa012a..8bbb0f8996 100644 --- a/config/examples/BQ/Hephestos_2/Configuration_adv.h +++ b/config/examples/BQ/Hephestos_2/Configuration_adv.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "BQ/Hephestos_2" + /** * Configuration_adv.h * @@ -479,7 +481,7 @@ // When first starting the main fan, run it at full speed for the // given number of milliseconds. This gets the fan spinning reliably // before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) -//#define FAN_KICKSTART_TIME 100 +#define FAN_KICKSTART_TIME 800 // Some coolers may require a non-zero "off" state. //#define FAN_OFF_PWM 1 @@ -540,8 +542,8 @@ * Multiple extruders can be assigned to the same pin in which case * the fan will turn on when any selected extruder is above the threshold. */ -#define E0_AUTO_FAN_PIN -1 -#define E1_AUTO_FAN_PIN -1 +//#define E0_AUTO_FAN_PIN -1 +//#define E1_AUTO_FAN_PIN -1 #define E2_AUTO_FAN_PIN -1 #define E3_AUTO_FAN_PIN -1 #define E4_AUTO_FAN_PIN -1 @@ -736,13 +738,13 @@ //#define SENSORLESS_BACKOFF_MM { 2, 2 } // (mm) Backoff from endstops before sensorless homing -#define HOMING_BUMP_MM { 5, 5, 2 } // (mm) Backoff from endstops after first bump +#define HOMING_BUMP_MM { 5, 5, 1 } // (mm) Backoff from endstops after first bump #define HOMING_BUMP_DIVISOR { 2, 2, 4 } // Re-Bump Speed Divisor (Divides the Homing Feedrate) //#define HOMING_BACKOFF_POST_MM { 2, 2, 2 } // (mm) Backoff from endstops after homing -//#define QUICK_HOME // If G28 contains XY do a diagonal move first -//#define HOME_Y_BEFORE_X // If G28 contains XY home Y before X +#define QUICK_HOME // If G28 contains XY do a diagonal move first +#define HOME_Y_BEFORE_X // If G28 contains XY home Y before X //#define HOME_Z_FIRST // Home Z first. Requires a Z-MIN endstop (not a probe). //#define CODEPENDENT_XY_HOMING // If X/Y can't home without homing Y/X first @@ -867,7 +869,7 @@ // On a 300mm bed a 5% grade would give a misalignment of ~1.5cm #define G34_MAX_GRADE 5 // (%) Maximum incline that G34 will handle - #define Z_STEPPER_ALIGN_ITERATIONS 5 // Number of iterations to apply during alignment + #define Z_STEPPER_ALIGN_ITERATIONS 3 // Number of iterations to apply during alignment #define Z_STEPPER_ALIGN_ACC 0.02 // Stop iterating early if the accuracy is better than this #define RESTORE_LEVELING_AFTER_G34 // Restore leveling after G34 is done? // After G34, re-home Z (G28 Z) or just calculate it from the last probe heights? @@ -925,10 +927,10 @@ * Set DISABLE_INACTIVE_? 'true' to shut down axis steppers after an idle period. * The Deactive Time can be overridden with M18 and M84. Set to 0 for No Timeout. */ -#define DEFAULT_STEPPER_DEACTIVE_TIME 120 -#define DISABLE_INACTIVE_X true -#define DISABLE_INACTIVE_Y true -#define DISABLE_INACTIVE_Z true // Set 'false' if the nozzle could fall onto your printed part! +#define DEFAULT_STEPPER_DEACTIVE_TIME 300 +#define DISABLE_INACTIVE_X false +#define DISABLE_INACTIVE_Y false +#define DISABLE_INACTIVE_Z false // Set 'false' if the nozzle could fall onto your printed part! #define DISABLE_INACTIVE_E true // Default Minimum Feedrates for printing and travel moves @@ -1095,9 +1097,17 @@ * M908 - BQ_ZUM_MEGA_3D, RAMBO, PRINTRBOARD_REVF, RIGIDBOARD_V2 & SCOOVO_X9H * M909, M910 & LCD - only PRINTRBOARD_REVF & RIGIDBOARD_V2 */ -//#define PWM_MOTOR_CURRENT { 1300, 1300, 1250 } // Values in milliamps -//#define DIGIPOT_MOTOR_CURRENT { 135,135,135,135,135 } // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A) -//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis +//#define PWM_MOTOR_CURRENT { 1300, 1300, 1250 } // Values in milliamps + +#define DIGIPOT_MOTOR_CURRENT { 170, 170, 180, 190, 180 } // Values 0-255 + // + // bq ZUM Mega 3D defaults: + // X = 150 [~1.17A] + // Y = 170 [~1.33A] + // Z = 180 [~1.41A] + // E0 = 190 [~1.49A] + +//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis /** * I2C-based DIGIPOTs (e.g., Azteeg X3 Pro) @@ -1138,7 +1148,7 @@ #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines #if IS_ULTIPANEL #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position" - #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen + //#define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen #endif #endif @@ -1146,7 +1156,7 @@ #define ENCODER_RATE_MULTIPLIER #if ENABLED(ENCODER_RATE_MULTIPLIER) #define ENCODER_10X_STEPS_PER_SEC 30 // (steps/s) Encoder rate for 10x speed - #define ENCODER_100X_STEPS_PER_SEC 80 // (steps/s) Encoder rate for 100x speed + #define ENCODER_100X_STEPS_PER_SEC 50 // (steps/s) Encoder rate for 100x speed #endif // Play a beep when the feedrate is changed from the Status Screen @@ -1219,7 +1229,7 @@ #if HAS_DISPLAY // The timeout (in ms) to return to the status screen from sub-menus - //#define LCD_TIMEOUT_TO_STATUS 15000 + #define LCD_TIMEOUT_TO_STATUS 60000 #if ENABLED(SHOW_BOOTSCREEN) #define BOOTSCREEN_TIMEOUT 4000 // (ms) Total Duration to display the boot screen(s) @@ -1229,10 +1239,10 @@ #endif // Scroll a longer status message into view - //#define STATUS_MESSAGE_SCROLLING + #define STATUS_MESSAGE_SCROLLING // On the Info Screen, display XY with one decimal place when possible - //#define LCD_DECIMAL_SMALL_XY + #define LCD_DECIMAL_SMALL_XY // Add an 'M73' G-code to set the current percentage //#define LCD_SET_PROGRESS_MANUALLY @@ -1287,8 +1297,8 @@ #define SD_PROCEDURE_DEPTH 1 // Increase if you need more nested M32 calls - #define SD_FINISHED_STEPPERRELEASE true // Disable steppers when SD Print is finished - #define SD_FINISHED_RELEASECOMMAND "M84" // Use "M84XYE" to keep Z enabled so your bed stays in place + #define SD_FINISHED_STEPPERRELEASE false // Disable steppers when SD Print is finished + #define SD_FINISHED_RELEASECOMMAND "G27 P0" // Use "M84XYE" to keep Z enabled so your bed stays in place // Reverse SD sort to show "more recent" files first, according to the card's FAT. // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended. @@ -1301,7 +1311,7 @@ //#define BROWSE_MEDIA_ON_INSERT // Open the file browser when media is inserted - #define EVENT_GCODE_SD_ABORT "G28XY" // G-code to run on SD Abort Print (e.g., "G28XY" or "G27") + #define EVENT_GCODE_SD_ABORT "G27" // G-code to run on SD Abort Print (e.g., "G28XY" or "G27") #if ENABLED(PRINTER_EVENT_LEDS) #define PE_LEDS_COMPLETED_TIME (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination @@ -1516,7 +1526,7 @@ // Save many cycles by drawing a hollow frame or no frame on the Info Screen //#define XYZ_NO_FRAME - #define XYZ_HOLLOW_FRAME + //#define XYZ_HOLLOW_FRAME // Enable to save many cycles by drawing a hollow frame on Menu Screens #define MENU_HOLLOW_FRAME @@ -1790,7 +1800,7 @@ * * Warning: Does not respect endstops! */ -//#define BABYSTEPPING +#define BABYSTEPPING #if ENABLED(BABYSTEPPING) //#define INTEGRATED_BABYSTEPPING // EXPERIMENTAL integration of babystepping into the Stepper ISR //#define BABYSTEP_WITHOUT_HOMING @@ -1798,12 +1808,12 @@ //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way //#define BABYSTEP_MILLIMETER_UNITS // Specify BABYSTEP_MULTIPLICATOR_(XY|Z) in mm instead of micro-steps - #define BABYSTEP_MULTIPLICATOR_Z 1 // (steps or mm) Steps or millimeter distance for each Z babystep - #define BABYSTEP_MULTIPLICATOR_XY 1 // (steps or mm) Steps or millimeter distance for each XY babystep + #define BABYSTEP_MULTIPLICATOR_Z 2 // (steps or mm) Steps or millimeter distance for each Z babystep + #define BABYSTEP_MULTIPLICATOR_XY 2 // (steps or mm) Steps or millimeter distance for each XY babystep //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 1500 // Maximum interval between clicks, in milliseconds. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on doubleclick when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) @@ -1982,7 +1992,7 @@ // // G2/G3 Arc Support // -#define ARC_SUPPORT // Disable this feature to save ~3226 bytes +//#define ARC_SUPPORT // Disable this feature to save ~3226 bytes #if ENABLED(ARC_SUPPORT) #define MM_PER_ARC_SEGMENT 1 // (mm) Length (or minimum length) of each arc segment //#define ARC_SEGMENTS_PER_R 1 // Max segment length, MM_PER = Min @@ -2084,7 +2094,7 @@ #elif ENABLED(SDSUPPORT) #define BLOCK_BUFFER_SIZE 16 #else - #define BLOCK_BUFFER_SIZE 16 + #define BLOCK_BUFFER_SIZE 64 #endif // @section serial @@ -2100,7 +2110,7 @@ // For debug-echo: 128 bytes for the optimal speed. // Other output doesn't need to be that speedy. // :[0, 2, 4, 8, 16, 32, 64, 128, 256] -#define TX_BUFFER_SIZE 0 +#define TX_BUFFER_SIZE 32 // Host Receive Buffer Size // Without XON/XOFF flow control (see SERIAL_XON_XOFF below) 32 bytes should be enough. @@ -2167,10 +2177,10 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +#define NO_TIMEOUTS 1000 // Milliseconds // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. -//#define ADVANCED_OK +#define ADVANCED_OK // Printrun may have trouble receiving long strings all at once. // This option inserts short delays between lines of serial output. @@ -3362,7 +3372,7 @@ #define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor. :[0,1,2,3,4] #define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber - #define FILWIDTH_ERROR_MARGIN 1.0 // (mm) If a measurement differs too much from nominal width ignore it + #define FILWIDTH_ERROR_MARGIN 0.25 // (mm) If a measurement differs too much from nominal width ignore it #define MAX_MEASUREMENT_DELAY 20 // (bytes) Buffer size for stored measurements (1 byte per cm). Must be larger than MEASUREMENT_DELAY_CM. #define DEFAULT_MEASURED_FILAMENT_DIA DEFAULT_NOMINAL_FILAMENT_DIA // Set measured to nominal initially @@ -3562,12 +3572,12 @@ #define MAIN_MENU_ITEM_2_GCODE "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND) //#define MAIN_MENU_ITEM_2_CONFIRM - //#define MAIN_MENU_ITEM_3_DESC "Preheat for " PREHEAT_2_LABEL - //#define MAIN_MENU_ITEM_3_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) + #define MAIN_MENU_ITEM_3_DESC "Preheat for " PREHEAT_2_LABEL + #define MAIN_MENU_ITEM_3_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) //#define MAIN_MENU_ITEM_3_CONFIRM - //#define MAIN_MENU_ITEM_4_DESC "Heat Bed/Home/Level" - //#define MAIN_MENU_ITEM_4_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29" + #define MAIN_MENU_ITEM_4_DESC "Heat Bed/Home/Level" + #define MAIN_MENU_ITEM_4_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29" //#define MAIN_MENU_ITEM_4_CONFIRM //#define MAIN_MENU_ITEM_5_DESC "Home & Info" diff --git a/config/examples/BQ/WITBOX/Configuration.h b/config/examples/BQ/WITBOX/Configuration.h index 78c2dc9160..b4ab211163 100644 --- a/config/examples/BQ/WITBOX/Configuration.h +++ b/config/examples/BQ/WITBOX/Configuration.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "BQ/WITBOX" + /** * Configuration.h * @@ -69,7 +71,7 @@ // @section info // Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes. +#define STRING_CONFIG_H_AUTHOR "(bq Witbox)" // Who made the changes. //#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) /** @@ -127,7 +129,7 @@ * * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ -#define BAUDRATE 250000 +#define BAUDRATE 115200 // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH @@ -138,7 +140,7 @@ #endif // Name displayed in the LCD "Ready" message and Info menu -//#define CUSTOM_MACHINE_NAME "3D Printer" +#define CUSTOM_MACHINE_NAME "WITBOX" // Printer's unique ID, used by some programs to differentiate between machines. // Choose your own or use a service like https://www.uuidgenerator.net/version4 @@ -318,7 +320,7 @@ * Enable and connect the power supply to the PS_ON_PIN. * Specify whether the power supply is active HIGH or active LOW. */ -//#define PSU_CONTROL +#define PSU_CONTROL //#define PSU_NAME "Power Supply" #if ENABLED(PSU_CONTROL) @@ -448,7 +450,7 @@ #define TEMP_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer #define TEMP_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target -#define TEMP_BED_RESIDENCY_TIME 10 // (seconds) Time to wait for bed to "settle" in M190 +#define TEMP_BED_RESIDENCY_TIME 0 // (seconds) Time to wait for bed to "settle" in M190 #define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer #define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target @@ -472,14 +474,14 @@ // Above this temperature the heater will be switched off. // This can protect components from overheating, but NOT from shorts and failures. // (Use MINTEMP for thermistor short/failure protection.) -#define HEATER_0_MAXTEMP 275 -#define HEATER_1_MAXTEMP 275 -#define HEATER_2_MAXTEMP 275 -#define HEATER_3_MAXTEMP 275 -#define HEATER_4_MAXTEMP 275 -#define HEATER_5_MAXTEMP 275 -#define HEATER_6_MAXTEMP 275 -#define HEATER_7_MAXTEMP 275 +#define HEATER_0_MAXTEMP 260 +#define HEATER_1_MAXTEMP 260 +#define HEATER_2_MAXTEMP 260 +#define HEATER_3_MAXTEMP 260 +#define HEATER_4_MAXTEMP 260 +#define HEATER_5_MAXTEMP 260 +#define HEATER_6_MAXTEMP 260 +#define HEATER_7_MAXTEMP 260 #define BED_MAXTEMP 150 #define CHAMBER_MAXTEMP 60 @@ -510,6 +512,7 @@ //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) // Set/get with gcode: M301 E[extruder number, 0-2] + // Witbox #if ENABLED(PID_PARAMS_PER_HOTEND) // Specify between 1 and HOTENDS values per array. // If fewer than EXTRUDER values are provided, the last element will be repeated. @@ -683,11 +686,11 @@ // Specify here all the endstop connectors that are connected to any endstop or probe. // Almost all printers will be using one per axis. Probes will use one or more of the // extra connectors. Leave undefined any used for non-endstop and non-probe purposes. -#define USE_XMIN_PLUG -#define USE_YMIN_PLUG +//#define USE_XMIN_PLUG +//#define USE_YMIN_PLUG #define USE_ZMIN_PLUG -//#define USE_XMAX_PLUG -//#define USE_YMAX_PLUG +#define USE_XMAX_PLUG +#define USE_YMAX_PLUG //#define USE_ZMAX_PLUG // Enable pullup for all endstops to prevent a floating state @@ -717,13 +720,13 @@ #endif // Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define X_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_PROBE_ENDSTOP_INVERTING false // Set to true to invert the logic of the probe. +#define X_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Y_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Z_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define X_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Y_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Z_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Z_MIN_PROBE_ENDSTOP_INVERTING true // Set to true to invert the logic of the probe. /** * Stepper Drivers @@ -806,14 +809,14 @@ * Override with M92 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 500 } +#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 600.0*8/3, 102.073 } /** * Default Max Feed Rate (mm/s) * Override with M203 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 } +#define DEFAULT_MAX_FEEDRATE { 350, 350, 7.2, 80 } //#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 #if ENABLED(LIMITED_MAX_FR_EDITING) @@ -826,7 +829,7 @@ * Override with M201 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 } +#define DEFAULT_MAX_ACCELERATION { 1000, 1000, 10, 1000 } //#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 #if ENABLED(LIMITED_MAX_ACCEL_EDITING) @@ -1055,7 +1058,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +#define NOZZLE_TO_PROBE_OFFSET { -25, -29, -12.35 } // Most probes should stay away from the edges of the bed, but // with NOZZLE_AS_PROBE this can be negative for a wider probing area. @@ -1065,7 +1068,7 @@ #define XY_PROBE_FEEDRATE (133*60) // Feedrate (mm/min) for the first approach when double-probing (MULTIPLE_PROBING == 2) -#define Z_PROBE_FEEDRATE_FAST (4*60) +#define Z_PROBE_FEEDRATE_FAST 432 // Feedrate (mm/min) for the "accurate" probe of each point #define Z_PROBE_FEEDRATE_SLOW (Z_PROBE_FEEDRATE_FAST / 2) @@ -1123,7 +1126,7 @@ * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. */ -#define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow +#define Z_CLEARANCE_DEPLOY_PROBE 15 // Z Clearance for Deploy/Stow #define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points #define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes //#define Z_AFTER_PROBING 5 // Z position after probing is done @@ -1177,7 +1180,7 @@ // WARNING: When motors turn off there is a chance of losing position accuracy! #define DISABLE_X false #define DISABLE_Y false -#define DISABLE_Z false +#define DISABLE_Z true // Turn off the display blinking that warns about possible accuracy reduction //#define DISABLE_REDUCED_ACCURACY_WARNING @@ -1190,9 +1193,9 @@ // @section machine // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR false -#define INVERT_Y_DIR true -#define INVERT_Z_DIR false +#define INVERT_X_DIR true +#define INVERT_Y_DIR false +#define INVERT_Z_DIR true // @section extruder @@ -1225,15 +1228,15 @@ // Direction of endstops when homing; 1=MAX, -1=MIN // :[-1,1] -#define X_HOME_DIR -1 -#define Y_HOME_DIR -1 +#define X_HOME_DIR 1 +#define Y_HOME_DIR 1 #define Z_HOME_DIR -1 // @section machine // The size of the printable area -#define X_BED_SIZE 200 -#define Y_BED_SIZE 200 +#define X_BED_SIZE 297 +#define Y_BED_SIZE 210 // Travel limits (mm) after homing, corresponding to endstop positions. #define X_MIN_POS 0 @@ -1595,7 +1598,7 @@ #endif // Homing speeds (mm/min) -#define HOMING_FEEDRATE_MM_M { (50*60), (50*60), (4*60) } +#define HOMING_FEEDRATE_MM_M { (120*60), (120*60), 432 } // Validate that endstops are triggered on homing moves #define VALIDATE_HOMING_ENDSTOPS @@ -1706,16 +1709,16 @@ // Preheat Constants - Up to 5 are supported without changes // #define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 180 -#define PREHEAT_1_TEMP_BED 70 +#define PREHEAT_1_TEMP_HOTEND 200 +#define PREHEAT_1_TEMP_BED 0 #define PREHEAT_1_TEMP_CHAMBER 35 -#define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 +#define PREHEAT_1_FAN_SPEED 255 // Value from 0 to 255 #define PREHEAT_2_LABEL "ABS" -#define PREHEAT_2_TEMP_HOTEND 240 -#define PREHEAT_2_TEMP_BED 110 +#define PREHEAT_2_TEMP_HOTEND 220 +#define PREHEAT_2_TEMP_BED 100 #define PREHEAT_2_TEMP_CHAMBER 35 -#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 +#define PREHEAT_2_FAN_SPEED 255 // Value from 0 to 255 /** * Nozzle Park @@ -1936,7 +1939,7 @@ * SD Card support is disabled by default. If your controller has an SD slot, * you must uncomment the following option or it won't work. */ -//#define SDSUPPORT +#define SDSUPPORT /** * SD CARD: ENABLE CRC @@ -2037,7 +2040,7 @@ // // Note: Usually sold with a white PCB. // -//#define REPRAP_DISCOUNT_SMART_CONTROLLER +#define REPRAP_DISCOUNT_SMART_CONTROLLER // // GT2560 (YHCB2004) LCD Display diff --git a/config/examples/BQ/WITBOX/Configuration_adv.h b/config/examples/BQ/WITBOX/Configuration_adv.h index 5335fa012a..61b4e05e03 100644 --- a/config/examples/BQ/WITBOX/Configuration_adv.h +++ b/config/examples/BQ/WITBOX/Configuration_adv.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "BQ/WITBOX" + /** * Configuration_adv.h * @@ -867,7 +869,7 @@ // On a 300mm bed a 5% grade would give a misalignment of ~1.5cm #define G34_MAX_GRADE 5 // (%) Maximum incline that G34 will handle - #define Z_STEPPER_ALIGN_ITERATIONS 5 // Number of iterations to apply during alignment + #define Z_STEPPER_ALIGN_ITERATIONS 3 // Number of iterations to apply during alignment #define Z_STEPPER_ALIGN_ACC 0.02 // Stop iterating early if the accuracy is better than this #define RESTORE_LEVELING_AFTER_G34 // Restore leveling after G34 is done? // After G34, re-home Z (G28 Z) or just calculate it from the last probe heights? @@ -925,7 +927,7 @@ * Set DISABLE_INACTIVE_? 'true' to shut down axis steppers after an idle period. * The Deactive Time can be overridden with M18 and M84. Set to 0 for No Timeout. */ -#define DEFAULT_STEPPER_DEACTIVE_TIME 120 +#define DEFAULT_STEPPER_DEACTIVE_TIME 60 #define DISABLE_INACTIVE_X true #define DISABLE_INACTIVE_Y true #define DISABLE_INACTIVE_Z true // Set 'false' if the nozzle could fall onto your printed part! @@ -1134,7 +1136,7 @@ // @section lcd #if EITHER(IS_ULTIPANEL, EXTENSIBLE_UI) - #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel + #define MANUAL_FEEDRATE { 120*60, 120*60, 18*60, 60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines #if IS_ULTIPANEL #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position" @@ -3562,12 +3564,12 @@ #define MAIN_MENU_ITEM_2_GCODE "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND) //#define MAIN_MENU_ITEM_2_CONFIRM - //#define MAIN_MENU_ITEM_3_DESC "Preheat for " PREHEAT_2_LABEL - //#define MAIN_MENU_ITEM_3_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) + #define MAIN_MENU_ITEM_3_DESC "Preheat for " PREHEAT_2_LABEL + #define MAIN_MENU_ITEM_3_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) //#define MAIN_MENU_ITEM_3_CONFIRM - //#define MAIN_MENU_ITEM_4_DESC "Heat Bed/Home/Level" - //#define MAIN_MENU_ITEM_4_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29" + #define MAIN_MENU_ITEM_4_DESC "Heat Bed/Home/Level" + #define MAIN_MENU_ITEM_4_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29" //#define MAIN_MENU_ITEM_4_CONFIRM //#define MAIN_MENU_ITEM_5_DESC "Home & Info" diff --git a/config/examples/CTC/i3 2560 Rev A/no probe/Configuration.h b/config/examples/CTC/i3 2560 Rev A/no probe/Configuration.h index 78c2dc9160..c20b1913de 100644 --- a/config/examples/CTC/i3 2560 Rev A/no probe/Configuration.h +++ b/config/examples/CTC/i3 2560 Rev A/no probe/Configuration.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "CTC/i3 2560 Rev A/no probe" + /** * Configuration.h * @@ -69,7 +71,7 @@ // @section info // Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes. +#define STRING_CONFIG_H_AUTHOR "(madmachinations, CTC i3 GT2560 Rev A Clone)" // Who made the changes. //#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) /** @@ -134,11 +136,11 @@ // Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_RAMPS_14_EFB + #define MOTHERBOARD BOARD_GT2560_REV_A #endif // Name displayed in the LCD "Ready" message and Info menu -//#define CUSTOM_MACHINE_NAME "3D Printer" +#define CUSTOM_MACHINE_NAME "CTC i3 GT2560A" // Printer's unique ID, used by some programs to differentiate between machines. // Choose your own or use a service like https://www.uuidgenerator.net/version4 @@ -424,7 +426,7 @@ #define TEMP_SENSOR_5 0 #define TEMP_SENSOR_6 0 #define TEMP_SENSOR_7 0 -#define TEMP_SENSOR_BED 0 +#define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 #define TEMP_SENSOR_COOLER 0 @@ -510,16 +512,17 @@ //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) // Set/get with gcode: M301 E[extruder number, 0-2] + // CTC #if ENABLED(PID_PARAMS_PER_HOTEND) // Specify between 1 and HOTENDS values per array. // If fewer than EXTRUDER values are provided, the last element will be repeated. - #define DEFAULT_Kp_LIST { 22.20, 22.20 } - #define DEFAULT_Ki_LIST { 1.08, 1.08 } - #define DEFAULT_Kd_LIST { 114.00, 114.00 } + #define DEFAULT_Kp_LIST { 19.86, 19.86 } + #define DEFAULT_Ki_LIST { 1.00, 1.00 } + #define DEFAULT_Kd_LIST { 98.93, 98.93 } #else - #define DEFAULT_Kp 22.20 - #define DEFAULT_Ki 1.08 - #define DEFAULT_Kd 114.00 + #define DEFAULT_Kp 19.86 + #define DEFAULT_Ki 1.00 + #define DEFAULT_Kd 98.93 #endif #endif // PIDTEMP @@ -806,14 +809,14 @@ * Override with M92 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 500 } +#define DEFAULT_AXIS_STEPS_PER_UNIT { 78.74, 78.74, 2560, 105 } /** * Default Max Feed Rate (mm/s) * Override with M203 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 } +#define DEFAULT_MAX_FEEDRATE { 400, 400, 2, 45 } //#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 #if ENABLED(LIMITED_MAX_FR_EDITING) @@ -826,7 +829,7 @@ * Override with M201 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 } +#define DEFAULT_MAX_ACCELERATION { 1400, 1400, 100, 8000 } //#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 #if ENABLED(LIMITED_MAX_ACCEL_EDITING) @@ -841,9 +844,9 @@ * M204 R Retract Acceleration * M204 T Travel Acceleration */ -#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves +#define DEFAULT_ACCELERATION 1400 // X, Y, Z and E acceleration for printing moves #define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves +#define DEFAULT_TRAVEL_ACCELERATION 1400 // X, Y, Z acceleration for travel (non printing) moves /** * Default Jerk limits (mm/s) @@ -877,7 +880,7 @@ * https://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html */ #if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.013 // (mm) Distance from real junction edge + #define JUNCTION_DEVIATION_MM 0.04 // (mm) Distance from real junction edge #define JD_HANDLE_SMALL_SEGMENTS // Use curvature estimation instead of just the junction angle // for small segments (< 1mm) with large junction angles (> 135°). #endif @@ -890,7 +893,7 @@ * * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained */ -//#define S_CURVE_ACCELERATION +#define S_CURVE_ACCELERATION //=========================================================================== //============================= Z Probe Options ============================= @@ -906,7 +909,7 @@ * The probe replaces the Z-MIN endstop and is used for Z homing. * (Automatically enables USE_PROBE_FOR_Z_HOMING.) */ -#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN +//#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN // Force the use of the probe for Z-axis homing //#define USE_PROBE_FOR_Z_HOMING @@ -940,7 +943,7 @@ * Use G29 repeatedly, adjusting the Z height at each point with movement commands * or (with LCD_BED_LEVELING) the LCD controller. */ -//#define PROBE_MANUALLY +#define PROBE_MANUALLY /** * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. @@ -1197,7 +1200,7 @@ // @section extruder // For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR false +#define INVERT_E0_DIR true #define INVERT_E1_DIR false #define INVERT_E2_DIR false #define INVERT_E3_DIR false @@ -1387,7 +1390,7 @@ */ //#define AUTO_BED_LEVELING_3POINT //#define AUTO_BED_LEVELING_LINEAR -//#define AUTO_BED_LEVELING_BILINEAR +#define AUTO_BED_LEVELING_BILINEAR //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING @@ -1464,7 +1467,7 @@ // Beyond the probed grid, continue the implied tilt? // Default is to maintain the height of the nearest edge. - //#define EXTRAPOLATE_BEYOND_GRID + #define EXTRAPOLATE_BEYOND_GRID // // Experimental Subdivision of the grid by Catmull-Rom method. @@ -1518,7 +1521,7 @@ * Add a bed leveling sub-menu for ABL or MBL. * Include a guided procedure if manual probing is enabled. */ -//#define LCD_BED_LEVELING +#define LCD_BED_LEVELING #if ENABLED(LCD_BED_LEVELING) #define MESH_EDIT_Z_STEP 0.025 // (mm) Step size while manually probing Z axis. @@ -1527,7 +1530,7 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS +#define LEVEL_BED_CORNERS #if ENABLED(LEVEL_BED_CORNERS) #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets @@ -1936,14 +1939,14 @@ * SD Card support is disabled by default. If your controller has an SD slot, * you must uncomment the following option or it won't work. */ -//#define SDSUPPORT +#define SDSUPPORT /** * SD CARD: ENABLE CRC * * Use CRC checks and retries on the SD communication. */ -//#define SD_CHECK_AND_RETRY +#define SD_CHECK_AND_RETRY /** * LCD Menu Items @@ -1983,7 +1986,7 @@ // // Set this option if CLOCKWISE causes values to DECREASE // -//#define REVERSE_ENCODER_DIRECTION +#define REVERSE_ENCODER_DIRECTION // // This option reverses the encoder direction for navigating LCD menus. @@ -2006,7 +2009,7 @@ // // Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. // -//#define INDIVIDUAL_AXIS_HOMING_MENU +#define INDIVIDUAL_AXIS_HOMING_MENU // // SPEAKER/BUZZER @@ -2037,7 +2040,7 @@ // // Note: Usually sold with a white PCB. // -//#define REPRAP_DISCOUNT_SMART_CONTROLLER +#define REPRAP_DISCOUNT_SMART_CONTROLLER // // GT2560 (YHCB2004) LCD Display diff --git a/config/examples/Cartesio/Configuration.h b/config/examples/Cartesio/Configuration.h index 78c2dc9160..d08fe81ba2 100644 --- a/config/examples/Cartesio/Configuration.h +++ b/config/examples/Cartesio/Configuration.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Cartesio" + /** * Configuration.h * @@ -69,7 +71,7 @@ // @section info // Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes. +#define STRING_CONFIG_H_AUTHOR "(MaukCC, CartesioE)" // Who made the changes. //#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) /** @@ -87,7 +89,7 @@ #define SHOW_BOOTSCREEN // Show the bitmap in Marlin/_Bootscreen.h on startup. -//#define SHOW_CUSTOM_BOOTSCREEN +#define SHOW_CUSTOM_BOOTSCREEN // Show the bitmap in Marlin/_Statusscreen.h on the status screen. //#define CUSTOM_STATUS_SCREEN_IMAGE @@ -127,18 +129,19 @@ * * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ -#define BAUDRATE 250000 +#define BAUDRATE 115200 // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH // Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_RAMPS_14_EFB + //#define MOTHERBOARD BOARD_CNCONTROLS_11 + #define MOTHERBOARD BOARD_CNCONTROLS_12 #endif // Name displayed in the LCD "Ready" message and Info menu -//#define CUSTOM_MACHINE_NAME "3D Printer" +#define CUSTOM_MACHINE_NAME "CartesioE" // Printer's unique ID, used by some programs to differentiate between machines. // Choose your own or use a service like https://www.uuidgenerator.net/version4 @@ -148,7 +151,7 @@ // This defines the number of extruders // :[0, 1, 2, 3, 4, 5, 6, 7, 8] -#define EXTRUDERS 1 +#define EXTRUDERS 3 // Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc. #define DEFAULT_NOMINAL_FILAMENT_DIA 1.75 @@ -416,15 +419,15 @@ * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. */ -#define TEMP_SENSOR_0 1 -#define TEMP_SENSOR_1 0 -#define TEMP_SENSOR_2 0 +#define TEMP_SENSOR_0 -1 +#define TEMP_SENSOR_1 -1 +#define TEMP_SENSOR_2 1 #define TEMP_SENSOR_3 0 #define TEMP_SENSOR_4 0 #define TEMP_SENSOR_5 0 #define TEMP_SENSOR_6 0 #define TEMP_SENSOR_7 0 -#define TEMP_SENSOR_BED 0 +#define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 #define TEMP_SENSOR_COOLER 0 @@ -444,11 +447,11 @@ //#define TEMP_SENSOR_1_AS_REDUNDANT #define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10 -#define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 +#define TEMP_RESIDENCY_TIME 4 // (seconds) Time to wait for hotend to "settle" in M109 #define TEMP_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer #define TEMP_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target -#define TEMP_BED_RESIDENCY_TIME 10 // (seconds) Time to wait for bed to "settle" in M190 +#define TEMP_BED_RESIDENCY_TIME 1 // (seconds) Time to wait for bed to "settle" in M190 #define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer #define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target @@ -472,15 +475,15 @@ // Above this temperature the heater will be switched off. // This can protect components from overheating, but NOT from shorts and failures. // (Use MINTEMP for thermistor short/failure protection.) -#define HEATER_0_MAXTEMP 275 -#define HEATER_1_MAXTEMP 275 -#define HEATER_2_MAXTEMP 275 -#define HEATER_3_MAXTEMP 275 -#define HEATER_4_MAXTEMP 275 -#define HEATER_5_MAXTEMP 275 -#define HEATER_6_MAXTEMP 275 -#define HEATER_7_MAXTEMP 275 -#define BED_MAXTEMP 150 +#define HEATER_0_MAXTEMP 415 +#define HEATER_1_MAXTEMP 415 +#define HEATER_2_MAXTEMP 415 +#define HEATER_3_MAXTEMP 415 +#define HEATER_4_MAXTEMP 415 +#define HEATER_5_MAXTEMP 415 +#define HEATER_6_MAXTEMP 415 +#define HEATER_7_MAXTEMP 415 +#define BED_MAXTEMP 165 #define CHAMBER_MAXTEMP 60 /** @@ -513,13 +516,24 @@ #if ENABLED(PID_PARAMS_PER_HOTEND) // Specify between 1 and HOTENDS values per array. // If fewer than EXTRUDER values are provided, the last element will be repeated. - #define DEFAULT_Kp_LIST { 22.20, 22.20 } - #define DEFAULT_Ki_LIST { 1.08, 1.08 } - #define DEFAULT_Kd_LIST { 114.00, 114.00 } + #define DEFAULT_Kp_LIST { 18.0, 18.0 } + #define DEFAULT_Ki_LIST { 1.0, 1.0 } + #define DEFAULT_Kd_LIST { 100.0, 100.0 } #else - #define DEFAULT_Kp 22.20 - #define DEFAULT_Ki 1.08 - #define DEFAULT_Kd 114.00 + // Cartesio extruderV6 40W Normal + #define DEFAULT_Kp 18.0 + #define DEFAULT_Ki 1.0 + #define DEFAULT_Kd 100.0 + + // Cartesio extruderV6 40W Volcano + //#define DEFAULT_Kp 50.0 + //#define DEFAULT_Ki 9.0 + //#define DEFAULT_Kd 70.0 + + // Cartesio extruderV6 40W Cyclops + //#define DEFAULT_Kp 18.0 + //#define DEFAULT_Ki 1.0 + //#define DEFAULT_Kd 100.0 #endif #endif // PIDTEMP @@ -540,7 +554,7 @@ * heater. If your configuration is significantly different than this and you don't understand * the issues involved, don't use bed PID until someone else verifies that your hardware works. */ -//#define PIDTEMPBED +#define PIDTEMPBED //#define BED_LIMIT_SWITCHING @@ -556,11 +570,15 @@ //#define MIN_BED_POWER 0 //#define PID_BED_DEBUG // Sends debug data to the serial port. - // 120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - // from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) - #define DEFAULT_bedKp 10.00 - #define DEFAULT_bedKi .023 - #define DEFAULT_bedKd 305.4 + // 24V 500W silicone heater on to 4mm glass CartesioW + #define DEFAULT_bedKp 390 + #define DEFAULT_bedKi 70 + #define DEFAULT_bedKd 546 + + // 24V 250W silicone heater on to 4mm glass CartesioM + //#define DEFAULT_bedKp 303 + //#define DEFAULT_bedKi 42 + //#define DEFAULT_bedKd 539 // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. #endif // PIDTEMPBED @@ -717,13 +735,13 @@ #endif // Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. +#define X_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Y_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Z_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. #define X_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. #define Y_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. #define Z_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_PROBE_ENDSTOP_INVERTING false // Set to true to invert the logic of the probe. +#define Z_MIN_PROBE_ENDSTOP_INVERTING true // Set to true to invert the logic of the probe. /** * Stepper Drivers @@ -752,8 +770,8 @@ //#define Z3_DRIVER_TYPE A4988 //#define Z4_DRIVER_TYPE A4988 #define E0_DRIVER_TYPE A4988 -//#define E1_DRIVER_TYPE A4988 -//#define E2_DRIVER_TYPE A4988 +#define E1_DRIVER_TYPE A4988 +#define E2_DRIVER_TYPE A4988 //#define E3_DRIVER_TYPE A4988 //#define E4_DRIVER_TYPE A4988 //#define E5_DRIVER_TYPE A4988 @@ -806,14 +824,14 @@ * Override with M92 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 500 } +#define DEFAULT_AXIS_STEPS_PER_UNIT { 71.128, 71.128, 640, 152 } /** * Default Max Feed Rate (mm/s) * Override with M203 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 } +#define DEFAULT_MAX_FEEDRATE { 200, 200, 20, 20 } //#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 #if ENABLED(LIMITED_MAX_FR_EDITING) @@ -826,7 +844,7 @@ * Override with M201 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 } +#define DEFAULT_MAX_ACCELERATION { 1000, 1000, 100, 10000 } //#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 #if ENABLED(LIMITED_MAX_ACCEL_EDITING) @@ -841,9 +859,9 @@ * M204 R Retract Acceleration * M204 T Travel Acceleration */ -#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves +#define DEFAULT_ACCELERATION 500 // X, Y, Z and E acceleration for printing moves +#define DEFAULT_RETRACT_ACCELERATION 10000 // E acceleration for retracts +#define DEFAULT_TRAVEL_ACCELERATION 1000 // X, Y, Z acceleration for travel (non printing) moves /** * Default Jerk limits (mm/s) @@ -877,7 +895,7 @@ * https://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html */ #if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.013 // (mm) Distance from real junction edge + #define JUNCTION_DEVIATION_MM 0.08 // (mm) Distance from real junction edge #define JD_HANDLE_SMALL_SEGMENTS // Use curvature estimation instead of just the junction angle // for small segments (< 1mm) with large junction angles (> 135°). #endif @@ -1065,7 +1083,7 @@ #define XY_PROBE_FEEDRATE (133*60) // Feedrate (mm/min) for the first approach when double-probing (MULTIPLE_PROBING == 2) -#define Z_PROBE_FEEDRATE_FAST (4*60) +#define Z_PROBE_FEEDRATE_FAST (10*60) // Feedrate (mm/min) for the "accurate" probe of each point #define Z_PROBE_FEEDRATE_SLOW (Z_PROBE_FEEDRATE_FAST / 2) @@ -1123,7 +1141,7 @@ * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. */ -#define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow +#define Z_CLEARANCE_DEPLOY_PROBE 15 // Z Clearance for Deploy/Stow #define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points #define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes //#define Z_AFTER_PROBING 5 // Z position after probing is done @@ -1168,9 +1186,9 @@ // For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1 // :{ 0:'Low', 1:'High' } -#define X_ENABLE_ON 0 -#define Y_ENABLE_ON 0 -#define Z_ENABLE_ON 0 +#define X_ENABLE_ON 1 +#define Y_ENABLE_ON 1 +#define Z_ENABLE_ON 1 #define E_ENABLE_ON 0 // For all extruders // Disable axis steppers immediately when they're not being stepped. @@ -1232,8 +1250,8 @@ // @section machine // The size of the printable area -#define X_BED_SIZE 200 -#define Y_BED_SIZE 200 +#define X_BED_SIZE 435 +#define Y_BED_SIZE 270 // Travel limits (mm) after homing, corresponding to endstop positions. #define X_MIN_POS 0 @@ -1241,7 +1259,7 @@ #define Z_MIN_POS 0 #define X_MAX_POS X_BED_SIZE #define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 200 +#define Z_MAX_POS 400 /** * Software Endstops @@ -1595,7 +1613,7 @@ #endif // Homing speeds (mm/min) -#define HOMING_FEEDRATE_MM_M { (50*60), (50*60), (4*60) } +#define HOMING_FEEDRATE_MM_M { (50*60), (50*60), (10*60) } // Validate that endstops are triggered on homing moves #define VALIDATE_HOMING_ENDSTOPS @@ -1706,8 +1724,8 @@ // Preheat Constants - Up to 5 are supported without changes // #define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 180 -#define PREHEAT_1_TEMP_BED 70 +#define PREHEAT_1_TEMP_HOTEND 190 +#define PREHEAT_1_TEMP_BED 50 #define PREHEAT_1_TEMP_CHAMBER 35 #define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 @@ -1936,7 +1954,7 @@ * SD Card support is disabled by default. If your controller has an SD slot, * you must uncomment the following option or it won't work. */ -//#define SDSUPPORT +#define SDSUPPORT /** * SD CARD: ENABLE CRC @@ -1960,13 +1978,13 @@ // This option overrides the default number of encoder pulses needed to // produce one step. Should be increased for high-resolution encoders. // -//#define ENCODER_PULSES_PER_STEP 4 +#define ENCODER_PULSES_PER_STEP 2 // // Use this option to override the number of step signals required to // move between next/prev menu items. // -//#define ENCODER_STEPS_PER_MENU_ITEM 1 +#define ENCODER_STEPS_PER_MENU_ITEM 1 /** * Encoder Direction Options @@ -2014,7 +2032,7 @@ // If you have a speaker that can produce tones, enable it here. // By default Marlin assumes you have a buzzer with a fixed frequency. // -//#define SPEAKER +#define SPEAKER // // The duration and frequency for the UI feedback sound. @@ -2023,8 +2041,8 @@ // Note: Test audio output with the G-Code: // M300 S P // -//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 -//#define LCD_FEEDBACK_FREQUENCY_HZ 5000 +#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 100 +#define LCD_FEEDBACK_FREQUENCY_HZ 1000 //============================================================================= //======================== LCD / Controller Selection ========================= @@ -2244,7 +2262,7 @@ // Cartesio UI // http://mauk.cc/webshop/cartesio-shop/electronics/user-interface // -//#define CARTESIO_UI +#define CARTESIO_UI // // LCD for Melzi Card with Graphical LCD @@ -2599,8 +2617,8 @@ // RepRapWorld REPRAPWORLD_KEYPAD v1.1 // https://reprapworld.com/products/electronics/ramps/keypad_v1_0_fully_assembled/ // -//#define REPRAPWORLD_KEYPAD -//#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 // (mm) Distance to move per key-press +#define REPRAPWORLD_KEYPAD +#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 // (mm) Distance to move per key-press //============================================================================= //=============================== Extra Features ============================== @@ -2636,7 +2654,7 @@ // Temperature status LEDs that display the hotend and bed temperature. // If all hotends, bed temperature, and target temperature are under 54C // then the BLUE led is on. Otherwise the RED led is on. (1C hysteresis) -//#define TEMP_STAT_LEDS +#define TEMP_STAT_LEDS // Support for the BariCUDA Paste Extruder //#define BARICUDA diff --git a/config/examples/Cartesio/Configuration_adv.h b/config/examples/Cartesio/Configuration_adv.h index 5335fa012a..42fef6fef3 100644 --- a/config/examples/Cartesio/Configuration_adv.h +++ b/config/examples/Cartesio/Configuration_adv.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Cartesio" + /** * Configuration_adv.h * @@ -540,8 +542,8 @@ * Multiple extruders can be assigned to the same pin in which case * the fan will turn on when any selected extruder is above the threshold. */ -#define E0_AUTO_FAN_PIN -1 -#define E1_AUTO_FAN_PIN -1 +//#define E0_AUTO_FAN_PIN -1 +//#define E1_AUTO_FAN_PIN -1 #define E2_AUTO_FAN_PIN -1 #define E3_AUTO_FAN_PIN -1 #define E4_AUTO_FAN_PIN -1 @@ -552,7 +554,7 @@ #define COOLER_AUTO_FAN_PIN -1 #define COOLER_FAN_PIN -1 -#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 +#define EXTRUDER_AUTO_FAN_TEMPERATURE 35 #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed #define CHAMBER_AUTO_FAN_TEMPERATURE 30 #define CHAMBER_AUTO_FAN_SPEED 255 @@ -742,7 +744,7 @@ //#define HOMING_BACKOFF_POST_MM { 2, 2, 2 } // (mm) Backoff from endstops after homing //#define QUICK_HOME // If G28 contains XY do a diagonal move first -//#define HOME_Y_BEFORE_X // If G28 contains XY home Y before X +#define HOME_Y_BEFORE_X // If G28 contains XY home Y before X //#define HOME_Z_FIRST // Home Z first. Requires a Z-MIN endstop (not a probe). //#define CODEPENDENT_XY_HOMING // If X/Y can't home without homing Y/X first @@ -867,7 +869,7 @@ // On a 300mm bed a 5% grade would give a misalignment of ~1.5cm #define G34_MAX_GRADE 5 // (%) Maximum incline that G34 will handle - #define Z_STEPPER_ALIGN_ITERATIONS 5 // Number of iterations to apply during alignment + #define Z_STEPPER_ALIGN_ITERATIONS 3 // Number of iterations to apply during alignment #define Z_STEPPER_ALIGN_ACC 0.02 // Stop iterating early if the accuracy is better than this #define RESTORE_LEVELING_AFTER_G34 // Restore leveling after G34 is done? // After G34, re-home Z (G28 Z) or just calculate it from the last probe heights? @@ -2314,11 +2316,11 @@ //#define ADVANCED_PAUSE_FEATURE #if ENABLED(ADVANCED_PAUSE_FEATURE) #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. - #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. + #define PAUSE_PARK_RETRACT_LENGTH 1 // (mm) Initial retract. // This short retract is done immediately, before parking the nozzle. #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast. #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload. + //#define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload. // For Bowden, the full length of the tube and nozzle. // For direct drive, the full length of the nozzle. // Set to 0 for manual unloading. diff --git a/config/examples/Copymaster3D/300/Configuration.h b/config/examples/Copymaster3D/300/Configuration.h index 78c2dc9160..95e555cbf6 100644 --- a/config/examples/Copymaster3D/300/Configuration.h +++ b/config/examples/Copymaster3D/300/Configuration.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Copymaster3D/300" + /** * Configuration.h * @@ -69,7 +71,7 @@ // @section info // Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes. +#define STRING_CONFIG_H_AUTHOR "(RasmusA, Copymaster3D-300)" // Who made the changes. //#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) /** @@ -127,18 +129,18 @@ * * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ -#define BAUDRATE 250000 +#define BAUDRATE 115200 // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH // Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_RAMPS_14_EFB + #define MOTHERBOARD BOARD_COPYMASTER_3D #endif // Name displayed in the LCD "Ready" message and Info menu -//#define CUSTOM_MACHINE_NAME "3D Printer" +#define CUSTOM_MACHINE_NAME "Copymaster 3D" // Printer's unique ID, used by some programs to differentiate between machines. // Choose your own or use a service like https://www.uuidgenerator.net/version4 @@ -416,7 +418,7 @@ * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. */ -#define TEMP_SENSOR_0 1 +#define TEMP_SENSOR_0 202 #define TEMP_SENSOR_1 0 #define TEMP_SENSOR_2 0 #define TEMP_SENSOR_3 0 @@ -424,7 +426,7 @@ #define TEMP_SENSOR_5 0 #define TEMP_SENSOR_6 0 #define TEMP_SENSOR_7 0 -#define TEMP_SENSOR_BED 0 +#define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 #define TEMP_SENSOR_COOLER 0 @@ -510,16 +512,17 @@ //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) // Set/get with gcode: M301 E[extruder number, 0-2] + // Copymaster 3D hotend #if ENABLED(PID_PARAMS_PER_HOTEND) // Specify between 1 and HOTENDS values per array. // If fewer than EXTRUDER values are provided, the last element will be repeated. - #define DEFAULT_Kp_LIST { 22.20, 22.20 } - #define DEFAULT_Ki_LIST { 1.08, 1.08 } - #define DEFAULT_Kd_LIST { 114.00, 114.00 } + #define DEFAULT_Kp_LIST { 86.56, 86.56 } + #define DEFAULT_Ki_LIST { 16.53, 16.53 } + #define DEFAULT_Kd_LIST { 113.58, 113.58 } #else - #define DEFAULT_Kp 22.20 - #define DEFAULT_Ki 1.08 - #define DEFAULT_Kd 114.00 + #define DEFAULT_Kp 86.56 + #define DEFAULT_Ki 16.53 + #define DEFAULT_Kd 113.58 #endif #endif // PIDTEMP @@ -684,10 +687,10 @@ // Almost all printers will be using one per axis. Probes will use one or more of the // extra connectors. Leave undefined any used for non-endstop and non-probe purposes. #define USE_XMIN_PLUG -#define USE_YMIN_PLUG +//#define USE_YMIN_PLUG #define USE_ZMIN_PLUG //#define USE_XMAX_PLUG -//#define USE_YMAX_PLUG +#define USE_YMAX_PLUG //#define USE_ZMAX_PLUG // Enable pullup for all endstops to prevent a floating state @@ -806,14 +809,14 @@ * Override with M92 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 500 } +#define DEFAULT_AXIS_STEPS_PER_UNIT { 94, 94, 400, 96 } /** * Default Max Feed Rate (mm/s) * Override with M203 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 } +#define DEFAULT_MAX_FEEDRATE { 100, 100, 5, 20 } //#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 #if ENABLED(LIMITED_MAX_FR_EDITING) @@ -826,7 +829,7 @@ * Override with M201 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 } +#define DEFAULT_MAX_ACCELERATION { 1000, 200, 100, 4000 } //#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 #if ENABLED(LIMITED_MAX_ACCEL_EDITING) @@ -841,9 +844,9 @@ * M204 R Retract Acceleration * M204 T Travel Acceleration */ -#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves +#define DEFAULT_ACCELERATION 500 // X, Y, Z and E acceleration for printing moves +#define DEFAULT_RETRACT_ACCELERATION 500 // E acceleration for retracts +#define DEFAULT_TRAVEL_ACCELERATION 500 // X, Y, Z acceleration for travel (non printing) moves /** * Default Jerk limits (mm/s) @@ -890,7 +893,7 @@ * * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained */ -//#define S_CURVE_ACCELERATION +#define S_CURVE_ACCELERATION //=========================================================================== //============================= Z Probe Options ============================= @@ -1191,13 +1194,13 @@ // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR false -#define INVERT_Y_DIR true -#define INVERT_Z_DIR false +#define INVERT_Y_DIR false +#define INVERT_Z_DIR true // @section extruder // For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR false +#define INVERT_E0_DIR true #define INVERT_E1_DIR false #define INVERT_E2_DIR false #define INVERT_E3_DIR false @@ -1226,14 +1229,14 @@ // Direction of endstops when homing; 1=MAX, -1=MIN // :[-1,1] #define X_HOME_DIR -1 -#define Y_HOME_DIR -1 +#define Y_HOME_DIR 1 #define Z_HOME_DIR -1 // @section machine // The size of the printable area -#define X_BED_SIZE 200 -#define Y_BED_SIZE 200 +#define X_BED_SIZE 310 +#define Y_BED_SIZE 310 // Travel limits (mm) after homing, corresponding to endstop positions. #define X_MIN_POS 0 @@ -1241,7 +1244,7 @@ #define Z_MIN_POS 0 #define X_MAX_POS X_BED_SIZE #define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 200 +#define Z_MAX_POS 400 /** * Software Endstops @@ -1290,7 +1293,7 @@ #define FIL_RUNOUT_ENABLED_DEFAULT true // Enable the sensor on startup. Override with M412 followed by M500. #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. - #define FIL_RUNOUT_STATE LOW // Pin state indicating that filament is NOT present. + #define FIL_RUNOUT_STATE HIGH // Pin state indicating that filament is NOT present. #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. //#define WATCH_ALL_RUNOUT_SENSORS // Execute runout script on any triggering sensor, not only for the active extruder. @@ -1389,7 +1392,7 @@ //#define AUTO_BED_LEVELING_LINEAR //#define AUTO_BED_LEVELING_BILINEAR //#define AUTO_BED_LEVELING_UBL -//#define MESH_BED_LEVELING +#define MESH_BED_LEVELING /** * Normally G28 leaves leveling disabled on completion. Enable one of @@ -1454,7 +1457,7 @@ #if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR) // Set the number of grid points per dimension. - #define GRID_MAX_POINTS_X 3 + #define GRID_MAX_POINTS_X 5 #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X // Probe along the Y axis, advancing X after each column @@ -1518,7 +1521,7 @@ * Add a bed leveling sub-menu for ABL or MBL. * Include a guided procedure if manual probing is enabled. */ -//#define LCD_BED_LEVELING +#define LCD_BED_LEVELING #if ENABLED(LCD_BED_LEVELING) #define MESH_EDIT_Z_STEP 0.025 // (mm) Step size while manually probing Z axis. @@ -1527,7 +1530,7 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS +#define LEVEL_BED_CORNERS #if ENABLED(LEVEL_BED_CORNERS) #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets @@ -1595,7 +1598,7 @@ #endif // Homing speeds (mm/min) -#define HOMING_FEEDRATE_MM_M { (50*60), (50*60), (4*60) } +#define HOMING_FEEDRATE_MM_M { (30*60), (30*60), (4*60) } // Validate that endstops are triggered on homing moves #define VALIDATE_HOMING_ENDSTOPS @@ -1672,7 +1675,7 @@ * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) */ -//#define EEPROM_SETTINGS // Persistent storage with M500 and M501 +#define EEPROM_SETTINGS // Persistent storage with M500 and M501 //#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. #define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load @@ -1707,7 +1710,7 @@ // #define PREHEAT_1_LABEL "PLA" #define PREHEAT_1_TEMP_HOTEND 180 -#define PREHEAT_1_TEMP_BED 70 +#define PREHEAT_1_TEMP_BED 60 #define PREHEAT_1_TEMP_CHAMBER 35 #define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 @@ -1936,7 +1939,7 @@ * SD Card support is disabled by default. If your controller has an SD slot, * you must uncomment the following option or it won't work. */ -//#define SDSUPPORT +#define SDSUPPORT /** * SD CARD: ENABLE CRC @@ -1983,7 +1986,7 @@ // // Set this option if CLOCKWISE causes values to DECREASE // -//#define REVERSE_ENCODER_DIRECTION +#define REVERSE_ENCODER_DIRECTION // // This option reverses the encoder direction for navigating LCD menus. @@ -2195,7 +2198,7 @@ // RepRapDiscount FULL GRAPHIC Smart Controller // https://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller // -//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER +#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER // // K.3D Full Graphic Smart Controller diff --git a/config/examples/Copymaster3D/400/Configuration.h b/config/examples/Copymaster3D/400/Configuration.h index 78c2dc9160..01219b3f76 100644 --- a/config/examples/Copymaster3D/400/Configuration.h +++ b/config/examples/Copymaster3D/400/Configuration.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Copymaster3D/400" + /** * Configuration.h * @@ -69,7 +71,7 @@ // @section info // Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes. +#define STRING_CONFIG_H_AUTHOR "(RasmusA, Copymaster3D-400)" // Who made the changes. //#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) /** @@ -127,18 +129,18 @@ * * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ -#define BAUDRATE 250000 +#define BAUDRATE 115200 // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH // Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_RAMPS_14_EFB + #define MOTHERBOARD BOARD_COPYMASTER_3D #endif // Name displayed in the LCD "Ready" message and Info menu -//#define CUSTOM_MACHINE_NAME "3D Printer" +#define CUSTOM_MACHINE_NAME "Copymaster 3D" // Printer's unique ID, used by some programs to differentiate between machines. // Choose your own or use a service like https://www.uuidgenerator.net/version4 @@ -416,7 +418,7 @@ * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. */ -#define TEMP_SENSOR_0 1 +#define TEMP_SENSOR_0 202 #define TEMP_SENSOR_1 0 #define TEMP_SENSOR_2 0 #define TEMP_SENSOR_3 0 @@ -424,7 +426,7 @@ #define TEMP_SENSOR_5 0 #define TEMP_SENSOR_6 0 #define TEMP_SENSOR_7 0 -#define TEMP_SENSOR_BED 0 +#define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 #define TEMP_SENSOR_COOLER 0 @@ -684,10 +686,10 @@ // Almost all printers will be using one per axis. Probes will use one or more of the // extra connectors. Leave undefined any used for non-endstop and non-probe purposes. #define USE_XMIN_PLUG -#define USE_YMIN_PLUG +//#define USE_YMIN_PLUG #define USE_ZMIN_PLUG //#define USE_XMAX_PLUG -//#define USE_YMAX_PLUG +#define USE_YMAX_PLUG //#define USE_ZMAX_PLUG // Enable pullup for all endstops to prevent a floating state @@ -806,7 +808,7 @@ * Override with M92 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 500 } +#define DEFAULT_AXIS_STEPS_PER_UNIT { 94, 94, 400, 96 } /** * Default Max Feed Rate (mm/s) @@ -826,7 +828,7 @@ * Override with M201 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 } +#define DEFAULT_MAX_ACCELERATION { 1000, 500, 100, 4000 } //#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 #if ENABLED(LIMITED_MAX_ACCEL_EDITING) @@ -841,9 +843,9 @@ * M204 R Retract Acceleration * M204 T Travel Acceleration */ -#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves +#define DEFAULT_ACCELERATION 500 // X, Y, Z and E acceleration for printing moves +#define DEFAULT_RETRACT_ACCELERATION 500 // E acceleration for retracts +#define DEFAULT_TRAVEL_ACCELERATION 500 // X, Y, Z acceleration for travel (non printing) moves /** * Default Jerk limits (mm/s) @@ -890,7 +892,7 @@ * * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained */ -//#define S_CURVE_ACCELERATION +#define S_CURVE_ACCELERATION //=========================================================================== //============================= Z Probe Options ============================= @@ -1191,13 +1193,13 @@ // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR false -#define INVERT_Y_DIR true -#define INVERT_Z_DIR false +#define INVERT_Y_DIR false +#define INVERT_Z_DIR true // @section extruder // For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR false +#define INVERT_E0_DIR true #define INVERT_E1_DIR false #define INVERT_E2_DIR false #define INVERT_E3_DIR false @@ -1226,14 +1228,14 @@ // Direction of endstops when homing; 1=MAX, -1=MIN // :[-1,1] #define X_HOME_DIR -1 -#define Y_HOME_DIR -1 +#define Y_HOME_DIR 1 #define Z_HOME_DIR -1 // @section machine // The size of the printable area -#define X_BED_SIZE 200 -#define Y_BED_SIZE 200 +#define X_BED_SIZE 410 +#define Y_BED_SIZE 410 // Travel limits (mm) after homing, corresponding to endstop positions. #define X_MIN_POS 0 @@ -1241,7 +1243,7 @@ #define Z_MIN_POS 0 #define X_MAX_POS X_BED_SIZE #define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 200 +#define Z_MAX_POS 400 /** * Software Endstops @@ -1290,7 +1292,7 @@ #define FIL_RUNOUT_ENABLED_DEFAULT true // Enable the sensor on startup. Override with M412 followed by M500. #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. - #define FIL_RUNOUT_STATE LOW // Pin state indicating that filament is NOT present. + #define FIL_RUNOUT_STATE HIGH // Pin state indicating that filament is NOT present. #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. //#define WATCH_ALL_RUNOUT_SENSORS // Execute runout script on any triggering sensor, not only for the active extruder. @@ -1389,7 +1391,7 @@ //#define AUTO_BED_LEVELING_LINEAR //#define AUTO_BED_LEVELING_BILINEAR //#define AUTO_BED_LEVELING_UBL -//#define MESH_BED_LEVELING +#define MESH_BED_LEVELING /** * Normally G28 leaves leveling disabled on completion. Enable one of @@ -1454,7 +1456,7 @@ #if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR) // Set the number of grid points per dimension. - #define GRID_MAX_POINTS_X 3 + #define GRID_MAX_POINTS_X 4 #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X // Probe along the Y axis, advancing X after each column @@ -1518,7 +1520,7 @@ * Add a bed leveling sub-menu for ABL or MBL. * Include a guided procedure if manual probing is enabled. */ -//#define LCD_BED_LEVELING +#define LCD_BED_LEVELING #if ENABLED(LCD_BED_LEVELING) #define MESH_EDIT_Z_STEP 0.025 // (mm) Step size while manually probing Z axis. @@ -1527,7 +1529,7 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS +#define LEVEL_BED_CORNERS #if ENABLED(LEVEL_BED_CORNERS) #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets @@ -1595,7 +1597,7 @@ #endif // Homing speeds (mm/min) -#define HOMING_FEEDRATE_MM_M { (50*60), (50*60), (4*60) } +#define HOMING_FEEDRATE_MM_M { (30*60), (30*60), (4*60) } // Validate that endstops are triggered on homing moves #define VALIDATE_HOMING_ENDSTOPS @@ -1672,7 +1674,7 @@ * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) */ -//#define EEPROM_SETTINGS // Persistent storage with M500 and M501 +#define EEPROM_SETTINGS // Persistent storage with M500 and M501 //#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. #define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load @@ -1707,7 +1709,7 @@ // #define PREHEAT_1_LABEL "PLA" #define PREHEAT_1_TEMP_HOTEND 180 -#define PREHEAT_1_TEMP_BED 70 +#define PREHEAT_1_TEMP_BED 60 #define PREHEAT_1_TEMP_CHAMBER 35 #define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 @@ -1936,7 +1938,7 @@ * SD Card support is disabled by default. If your controller has an SD slot, * you must uncomment the following option or it won't work. */ -//#define SDSUPPORT +#define SDSUPPORT /** * SD CARD: ENABLE CRC @@ -1983,7 +1985,7 @@ // // Set this option if CLOCKWISE causes values to DECREASE // -//#define REVERSE_ENCODER_DIRECTION +#define REVERSE_ENCODER_DIRECTION // // This option reverses the encoder direction for navigating LCD menus. @@ -2195,7 +2197,7 @@ // RepRapDiscount FULL GRAPHIC Smart Controller // https://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller // -//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER +#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER // // K.3D Full Graphic Smart Controller diff --git a/config/examples/Copymaster3D/500/Configuration.h b/config/examples/Copymaster3D/500/Configuration.h index 78c2dc9160..201b019d8b 100644 --- a/config/examples/Copymaster3D/500/Configuration.h +++ b/config/examples/Copymaster3D/500/Configuration.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Copymaster3D/500" + /** * Configuration.h * @@ -69,7 +71,7 @@ // @section info // Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes. +#define STRING_CONFIG_H_AUTHOR "(RasmusA, Copymaster3D-500)" // Who made the changes. //#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) /** @@ -127,18 +129,18 @@ * * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ -#define BAUDRATE 250000 +#define BAUDRATE 115200 // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH // Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_RAMPS_14_EFB + #define MOTHERBOARD BOARD_COPYMASTER_3D #endif // Name displayed in the LCD "Ready" message and Info menu -//#define CUSTOM_MACHINE_NAME "3D Printer" +#define CUSTOM_MACHINE_NAME "Copymaster 3D" // Printer's unique ID, used by some programs to differentiate between machines. // Choose your own or use a service like https://www.uuidgenerator.net/version4 @@ -416,7 +418,7 @@ * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. */ -#define TEMP_SENSOR_0 1 +#define TEMP_SENSOR_0 202 #define TEMP_SENSOR_1 0 #define TEMP_SENSOR_2 0 #define TEMP_SENSOR_3 0 @@ -424,7 +426,7 @@ #define TEMP_SENSOR_5 0 #define TEMP_SENSOR_6 0 #define TEMP_SENSOR_7 0 -#define TEMP_SENSOR_BED 0 +#define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 #define TEMP_SENSOR_COOLER 0 @@ -510,16 +512,17 @@ //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) // Set/get with gcode: M301 E[extruder number, 0-2] + // Copymaster 3D hotend #if ENABLED(PID_PARAMS_PER_HOTEND) // Specify between 1 and HOTENDS values per array. // If fewer than EXTRUDER values are provided, the last element will be repeated. - #define DEFAULT_Kp_LIST { 22.20, 22.20 } - #define DEFAULT_Ki_LIST { 1.08, 1.08 } - #define DEFAULT_Kd_LIST { 114.00, 114.00 } + #define DEFAULT_Kp_LIST { 86.56, 86.56 } + #define DEFAULT_Ki_LIST { 16.53, 16.53 } + #define DEFAULT_Kd_LIST { 113.58, 113.58 } #else - #define DEFAULT_Kp 22.20 - #define DEFAULT_Ki 1.08 - #define DEFAULT_Kd 114.00 + #define DEFAULT_Kp 86.56 + #define DEFAULT_Ki 16.53 + #define DEFAULT_Kd 113.58 #endif #endif // PIDTEMP @@ -684,10 +687,10 @@ // Almost all printers will be using one per axis. Probes will use one or more of the // extra connectors. Leave undefined any used for non-endstop and non-probe purposes. #define USE_XMIN_PLUG -#define USE_YMIN_PLUG +//#define USE_YMIN_PLUG #define USE_ZMIN_PLUG //#define USE_XMAX_PLUG -//#define USE_YMAX_PLUG +#define USE_YMAX_PLUG //#define USE_ZMAX_PLUG // Enable pullup for all endstops to prevent a floating state @@ -806,14 +809,14 @@ * Override with M92 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 500 } +#define DEFAULT_AXIS_STEPS_PER_UNIT { 94, 94, 400, 96 } /** * Default Max Feed Rate (mm/s) * Override with M203 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 } +#define DEFAULT_MAX_FEEDRATE { 100, 100, 5, 20 } //#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 #if ENABLED(LIMITED_MAX_FR_EDITING) @@ -826,7 +829,7 @@ * Override with M201 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 } +#define DEFAULT_MAX_ACCELERATION { 1000, 200, 100, 4000 } //#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 #if ENABLED(LIMITED_MAX_ACCEL_EDITING) @@ -841,9 +844,9 @@ * M204 R Retract Acceleration * M204 T Travel Acceleration */ -#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves +#define DEFAULT_ACCELERATION 500 // X, Y, Z and E acceleration for printing moves +#define DEFAULT_RETRACT_ACCELERATION 500 // E acceleration for retracts +#define DEFAULT_TRAVEL_ACCELERATION 500 // X, Y, Z acceleration for travel (non printing) moves /** * Default Jerk limits (mm/s) @@ -890,7 +893,7 @@ * * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained */ -//#define S_CURVE_ACCELERATION +#define S_CURVE_ACCELERATION //=========================================================================== //============================= Z Probe Options ============================= @@ -1191,13 +1194,13 @@ // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR false -#define INVERT_Y_DIR true -#define INVERT_Z_DIR false +#define INVERT_Y_DIR false +#define INVERT_Z_DIR true // @section extruder // For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR false +#define INVERT_E0_DIR true #define INVERT_E1_DIR false #define INVERT_E2_DIR false #define INVERT_E3_DIR false @@ -1226,14 +1229,14 @@ // Direction of endstops when homing; 1=MAX, -1=MIN // :[-1,1] #define X_HOME_DIR -1 -#define Y_HOME_DIR -1 +#define Y_HOME_DIR 1 #define Z_HOME_DIR -1 // @section machine // The size of the printable area -#define X_BED_SIZE 200 -#define Y_BED_SIZE 200 +#define X_BED_SIZE 510 +#define Y_BED_SIZE 510 // Travel limits (mm) after homing, corresponding to endstop positions. #define X_MIN_POS 0 @@ -1241,7 +1244,7 @@ #define Z_MIN_POS 0 #define X_MAX_POS X_BED_SIZE #define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 200 +#define Z_MAX_POS 500 /** * Software Endstops @@ -1290,7 +1293,7 @@ #define FIL_RUNOUT_ENABLED_DEFAULT true // Enable the sensor on startup. Override with M412 followed by M500. #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. - #define FIL_RUNOUT_STATE LOW // Pin state indicating that filament is NOT present. + #define FIL_RUNOUT_STATE HIGH // Pin state indicating that filament is NOT present. #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. //#define WATCH_ALL_RUNOUT_SENSORS // Execute runout script on any triggering sensor, not only for the active extruder. @@ -1389,7 +1392,7 @@ //#define AUTO_BED_LEVELING_LINEAR //#define AUTO_BED_LEVELING_BILINEAR //#define AUTO_BED_LEVELING_UBL -//#define MESH_BED_LEVELING +#define MESH_BED_LEVELING /** * Normally G28 leaves leveling disabled on completion. Enable one of @@ -1454,7 +1457,7 @@ #if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR) // Set the number of grid points per dimension. - #define GRID_MAX_POINTS_X 3 + #define GRID_MAX_POINTS_X 5 #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X // Probe along the Y axis, advancing X after each column @@ -1518,7 +1521,7 @@ * Add a bed leveling sub-menu for ABL or MBL. * Include a guided procedure if manual probing is enabled. */ -//#define LCD_BED_LEVELING +#define LCD_BED_LEVELING #if ENABLED(LCD_BED_LEVELING) #define MESH_EDIT_Z_STEP 0.025 // (mm) Step size while manually probing Z axis. @@ -1527,7 +1530,7 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS +#define LEVEL_BED_CORNERS #if ENABLED(LEVEL_BED_CORNERS) #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets @@ -1595,7 +1598,7 @@ #endif // Homing speeds (mm/min) -#define HOMING_FEEDRATE_MM_M { (50*60), (50*60), (4*60) } +#define HOMING_FEEDRATE_MM_M { (30*60), (30*60), (4*60) } // Validate that endstops are triggered on homing moves #define VALIDATE_HOMING_ENDSTOPS @@ -1672,7 +1675,7 @@ * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) */ -//#define EEPROM_SETTINGS // Persistent storage with M500 and M501 +#define EEPROM_SETTINGS // Persistent storage with M500 and M501 //#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. #define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load @@ -1707,7 +1710,7 @@ // #define PREHEAT_1_LABEL "PLA" #define PREHEAT_1_TEMP_HOTEND 180 -#define PREHEAT_1_TEMP_BED 70 +#define PREHEAT_1_TEMP_BED 60 #define PREHEAT_1_TEMP_CHAMBER 35 #define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 @@ -1936,7 +1939,7 @@ * SD Card support is disabled by default. If your controller has an SD slot, * you must uncomment the following option or it won't work. */ -//#define SDSUPPORT +#define SDSUPPORT /** * SD CARD: ENABLE CRC @@ -1983,7 +1986,7 @@ // // Set this option if CLOCKWISE causes values to DECREASE // -//#define REVERSE_ENCODER_DIRECTION +#define REVERSE_ENCODER_DIRECTION // // This option reverses the encoder direction for navigating LCD menus. @@ -2195,7 +2198,7 @@ // RepRapDiscount FULL GRAPHIC Smart Controller // https://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller // -//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER +#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER // // K.3D Full Graphic Smart Controller diff --git a/config/examples/Creality/CR-10 Mini/BigTreeTech SKR Mini E3 2.0/Configuration.h b/config/examples/Creality/CR-10 Mini/BigTreeTech SKR Mini E3 2.0/Configuration.h index 78c2dc9160..84b01414cb 100644 --- a/config/examples/Creality/CR-10 Mini/BigTreeTech SKR Mini E3 2.0/Configuration.h +++ b/config/examples/Creality/CR-10 Mini/BigTreeTech SKR Mini E3 2.0/Configuration.h @@ -1,6 +1,6 @@ /** * Marlin 3D Printer Firmware - * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * Copyright (c) 2021 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * * Based on Sprinter and grbl. * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Creality/CR-10 Mini/BigTreeTech SKR Mini E3 2.0" + /** * Configuration.h * @@ -35,6 +37,15 @@ * * Advanced settings can be found in Configuration_adv.h */ + +/** + * Creality CR-10 Mini + * X=300mm Y=220mm Z=300mm + * E3DV6 Hotend + * Titan Extruder + * CR10_STOCKDISPLAY (RAMPS-compatible with single 10-pin plug) + */ + #define CONFIGURATION_H_VERSION 02000801 //=========================================================================== @@ -69,7 +80,7 @@ // @section info // Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes. +#define STRING_CONFIG_H_AUTHOR "(kspousta, CR-10 Mini)" // Who made the changes. //#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) /** @@ -102,14 +113,14 @@ * * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] */ -#define SERIAL_PORT 0 +#define SERIAL_PORT 2 /** * Select a secondary serial port on the board to use for communication with the host. * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] */ -//#define SERIAL_PORT_2 -1 +#define SERIAL_PORT_2 -1 /** * Select a third serial port on the board to use for communication with the host. @@ -134,11 +145,11 @@ // Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_RAMPS_14_EFB + #define MOTHERBOARD BOARD_BTT_SKR_MINI_E3_V2_0 #endif // Name displayed in the LCD "Ready" message and Info menu -//#define CUSTOM_MACHINE_NAME "3D Printer" +#define CUSTOM_MACHINE_NAME "CR-10 Mini" // Printer's unique ID, used by some programs to differentiate between machines. // Choose your own or use a service like https://www.uuidgenerator.net/version4 @@ -424,7 +435,7 @@ #define TEMP_SENSOR_5 0 #define TEMP_SENSOR_6 0 #define TEMP_SENSOR_7 0 -#define TEMP_SENSOR_BED 0 +#define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 #define TEMP_SENSOR_COOLER 0 @@ -480,7 +491,7 @@ #define HEATER_5_MAXTEMP 275 #define HEATER_6_MAXTEMP 275 #define HEATER_7_MAXTEMP 275 -#define BED_MAXTEMP 150 +#define BED_MAXTEMP 125 #define CHAMBER_MAXTEMP 60 /** @@ -510,16 +521,17 @@ //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) // Set/get with gcode: M301 E[extruder number, 0-2] + // Creality CR-10 Mini #if ENABLED(PID_PARAMS_PER_HOTEND) // Specify between 1 and HOTENDS values per array. // If fewer than EXTRUDER values are provided, the last element will be repeated. - #define DEFAULT_Kp_LIST { 22.20, 22.20 } - #define DEFAULT_Ki_LIST { 1.08, 1.08 } - #define DEFAULT_Kd_LIST { 114.00, 114.00 } + #define DEFAULT_Kp_LIST { 21.73, 21.73 } + #define DEFAULT_Ki_LIST { 1.54, 1.54 } + #define DEFAULT_Kd_LIST { 76.55, 76.55 } #else - #define DEFAULT_Kp 22.20 - #define DEFAULT_Ki 1.08 - #define DEFAULT_Kd 114.00 + #define DEFAULT_Kp 21.73 + #define DEFAULT_Ki 1.54 + #define DEFAULT_Kd 76.55 #endif #endif // PIDTEMP @@ -556,11 +568,9 @@ //#define MIN_BED_POWER 0 //#define PID_BED_DEBUG // Sends debug data to the serial port. - // 120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - // from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) - #define DEFAULT_bedKp 10.00 - #define DEFAULT_bedKi .023 - #define DEFAULT_bedKd 305.4 + #define DEFAULT_bedKp 50.71 + #define DEFAULT_bedKi 9.88 + #define DEFAULT_bedKd 173.43 // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. #endif // PIDTEMPBED @@ -627,14 +637,14 @@ * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** */ #define PREVENT_COLD_EXTRUSION -#define EXTRUDE_MINTEMP 170 +#define EXTRUDE_MINTEMP 175 /** * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. * Note: For Bowden Extruders make this large enough to allow load/unload. */ #define PREVENT_LENGTHY_EXTRUDE -#define EXTRUDE_MAXLENGTH 200 +#define EXTRUDE_MAXLENGTH 600 //=========================================================================== //======================== Thermal Runaway Protection ======================= @@ -743,15 +753,15 @@ * TMC5130, TMC5130_STANDALONE, TMC5160, TMC5160_STANDALONE * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'L6474', 'POWERSTEP01', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2160', 'TMC2160_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC2209', 'TMC2209_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE', 'TMC5160', 'TMC5160_STANDALONE'] */ -#define X_DRIVER_TYPE A4988 -#define Y_DRIVER_TYPE A4988 -#define Z_DRIVER_TYPE A4988 +#define X_DRIVER_TYPE TMC2209 +#define Y_DRIVER_TYPE TMC2209 +#define Z_DRIVER_TYPE TMC2209 //#define X2_DRIVER_TYPE A4988 //#define Y2_DRIVER_TYPE A4988 //#define Z2_DRIVER_TYPE A4988 //#define Z3_DRIVER_TYPE A4988 //#define Z4_DRIVER_TYPE A4988 -#define E0_DRIVER_TYPE A4988 +#define E0_DRIVER_TYPE TMC2209 //#define E1_DRIVER_TYPE A4988 //#define E2_DRIVER_TYPE A4988 //#define E3_DRIVER_TYPE A4988 @@ -806,14 +816,14 @@ * Override with M92 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 500 } +#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 93 } /** * Default Max Feed Rate (mm/s) * Override with M203 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 } +#define DEFAULT_MAX_FEEDRATE { 500, 500, 5, 25 } //#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 #if ENABLED(LIMITED_MAX_FR_EDITING) @@ -826,7 +836,7 @@ * Override with M201 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 } +#define DEFAULT_MAX_ACCELERATION { 500, 500, 100, 5000 } //#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 #if ENABLED(LIMITED_MAX_ACCEL_EDITING) @@ -841,9 +851,9 @@ * M204 R Retract Acceleration * M204 T Travel Acceleration */ -#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves +#define DEFAULT_ACCELERATION 500 // X, Y, Z and E acceleration for printing moves +#define DEFAULT_RETRACT_ACCELERATION 500 // E acceleration for retracts +#define DEFAULT_TRAVEL_ACCELERATION 500 // X, Y, Z acceleration for travel (non printing) moves /** * Default Jerk limits (mm/s) @@ -877,7 +887,7 @@ * https://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html */ #if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.013 // (mm) Distance from real junction edge + #define JUNCTION_DEVIATION_MM 0.08 // (mm) Distance from real junction edge #define JD_HANDLE_SMALL_SEGMENTS // Use curvature estimation instead of just the junction angle // for small segments (< 1mm) with large junction angles (> 135°). #endif @@ -890,7 +900,7 @@ * * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained */ -//#define S_CURVE_ACCELERATION +#define S_CURVE_ACCELERATION //=========================================================================== //============================= Z Probe Options ============================= @@ -906,10 +916,10 @@ * The probe replaces the Z-MIN endstop and is used for Z homing. * (Automatically enables USE_PROBE_FOR_Z_HOMING.) */ -#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN +//#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN // Force the use of the probe for Z-axis homing -//#define USE_PROBE_FOR_Z_HOMING +#define USE_PROBE_FOR_Z_HOMING /** * Z_MIN_PROBE_PIN @@ -927,6 +937,7 @@ * - normally-open switches to 5V and D32. */ //#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +#define Z_MIN_PROBE_PIN PC14 //Zstop Pin in Z-Probe port /** * Probe Type @@ -963,7 +974,7 @@ /** * The BLTouch probe uses a Hall effect sensor and emulates a servo. */ -//#define BLTOUCH +#define BLTOUCH /** * Touch-MI Probe by hotends.fr @@ -1055,7 +1066,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +#define NOZZLE_TO_PROBE_OFFSET { -38, -8, 0 } // Most probes should stay away from the edges of the bed, but // with NOZZLE_AS_PROBE this can be negative for a wider probing area. @@ -1106,7 +1117,7 @@ * A total of 2 does fast/slow probes with a weighted average. * A total of 3 or more adds more slow probes, taking the average. */ -//#define MULTIPLE_PROBING 2 +#define MULTIPLE_PROBING 2 //#define EXTRA_PROBING 1 /** @@ -1126,7 +1137,7 @@ #define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow #define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points #define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes -//#define Z_AFTER_PROBING 5 // Z position after probing is done +#define Z_AFTER_PROBING 5 // Z position after probing is done #define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping @@ -1135,7 +1146,7 @@ #define Z_PROBE_OFFSET_RANGE_MAX 20 // Enable the M48 repeatability test to test probe accuracy -//#define Z_MIN_PROBE_REPEATABILITY_TEST +#define Z_MIN_PROBE_REPEATABILITY_TEST // Before deploy/stow pause for user confirmation //#define PAUSE_BEFORE_DEPLOY_STOW @@ -1190,14 +1201,14 @@ // @section machine // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR false +#define INVERT_X_DIR true #define INVERT_Y_DIR true #define INVERT_Z_DIR false // @section extruder // For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR false +#define INVERT_E0_DIR true #define INVERT_E1_DIR false #define INVERT_E2_DIR false #define INVERT_E3_DIR false @@ -1218,7 +1229,7 @@ */ //#define Z_IDLE_HEIGHT Z_HOME_POS -//#define Z_HOMING_HEIGHT 4 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ... +//#define Z_HOMING_HEIGHT 5 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ... // Be sure to have this much clearance over your Z_MAX_POS to prevent grinding. //#define Z_AFTER_HOMING 10 // (mm) Height to move to after homing Z @@ -1232,8 +1243,8 @@ // @section machine // The size of the printable area -#define X_BED_SIZE 200 -#define Y_BED_SIZE 200 +#define X_BED_SIZE 300 +#define Y_BED_SIZE 220 // Travel limits (mm) after homing, corresponding to endstop positions. #define X_MIN_POS 0 @@ -1241,7 +1252,7 @@ #define Z_MIN_POS 0 #define X_MAX_POS X_BED_SIZE #define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 200 +#define Z_MAX_POS 300 /** * Software Endstops @@ -1387,7 +1398,7 @@ */ //#define AUTO_BED_LEVELING_3POINT //#define AUTO_BED_LEVELING_LINEAR -//#define AUTO_BED_LEVELING_BILINEAR +#define AUTO_BED_LEVELING_BILINEAR //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING @@ -1454,7 +1465,7 @@ #if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR) // Set the number of grid points per dimension. - #define GRID_MAX_POINTS_X 3 + #define GRID_MAX_POINTS_X 5 #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X // Probe along the Y axis, advancing X after each column @@ -1464,7 +1475,7 @@ // Beyond the probed grid, continue the implied tilt? // Default is to maintain the height of the nearest edge. - //#define EXTRAPOLATE_BEYOND_GRID + #define EXTRAPOLATE_BEYOND_GRID // // Experimental Subdivision of the grid by Catmull-Rom method. @@ -1518,16 +1529,16 @@ * Add a bed leveling sub-menu for ABL or MBL. * Include a guided procedure if manual probing is enabled. */ -//#define LCD_BED_LEVELING +#define LCD_BED_LEVELING #if ENABLED(LCD_BED_LEVELING) #define MESH_EDIT_Z_STEP 0.025 // (mm) Step size while manually probing Z axis. #define LCD_PROBE_Z_RANGE 4 // (mm) Z Range centered on Z_MIN_POS for LCD Z adjustment - //#define MESH_EDIT_MENU // Add a menu to edit mesh points + #define MESH_EDIT_MENU // Add a menu to edit mesh points #endif // Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS +#define LEVEL_BED_CORNERS #if ENABLED(LEVEL_BED_CORNERS) #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets @@ -1587,7 +1598,7 @@ // - Move the Z probe (or nozzle) to a defined XY point before Z Homing. // - Prevent Z homing when the Z probe is outside bed area. // -//#define Z_SAFE_HOMING +#define Z_SAFE_HOMING #if ENABLED(Z_SAFE_HOMING) #define Z_SAFE_HOMING_X_POINT X_CENTER // X point for Z homing @@ -1595,7 +1606,7 @@ #endif // Homing speeds (mm/min) -#define HOMING_FEEDRATE_MM_M { (50*60), (50*60), (4*60) } +#define HOMING_FEEDRATE_MM_M { (40*60), (40*60), (6*60) } // Validate that endstops are triggered on homing moves #define VALIDATE_HOMING_ENDSTOPS @@ -1672,12 +1683,12 @@ * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) */ -//#define EEPROM_SETTINGS // Persistent storage with M500 and M501 +#define EEPROM_SETTINGS // Persistent storage with M500 and M501 //#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. #define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load #if ENABLED(EEPROM_SETTINGS) - //#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. + #define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. #endif // @@ -1706,16 +1717,16 @@ // Preheat Constants - Up to 5 are supported without changes // #define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 180 -#define PREHEAT_1_TEMP_BED 70 +#define PREHEAT_1_TEMP_HOTEND 195 +#define PREHEAT_1_TEMP_BED 60 #define PREHEAT_1_TEMP_CHAMBER 35 -#define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 +#define PREHEAT_1_FAN_SPEED 255 // Value from 0 to 255 #define PREHEAT_2_LABEL "ABS" #define PREHEAT_2_TEMP_HOTEND 240 #define PREHEAT_2_TEMP_BED 110 #define PREHEAT_2_TEMP_CHAMBER 35 -#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 +#define PREHEAT_2_FAN_SPEED 255 // Value from 0 to 255 /** * Nozzle Park @@ -1728,7 +1739,7 @@ * P1 Raise the nozzle always to Z-park height. * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. */ -//#define NOZZLE_PARK_FEATURE +#define NOZZLE_PARK_FEATURE #if ENABLED(NOZZLE_PARK_FEATURE) // Specify a park position as { X, Y, Z_raise } @@ -1936,7 +1947,7 @@ * SD Card support is disabled by default. If your controller has an SD slot, * you must uncomment the following option or it won't work. */ -//#define SDSUPPORT +#define SDSUPPORT /** * SD CARD: ENABLE CRC @@ -2006,7 +2017,7 @@ // // Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. // -//#define INDIVIDUAL_AXIS_HOMING_MENU +#define INDIVIDUAL_AXIS_HOMING_MENU // // SPEAKER/BUZZER @@ -2287,7 +2298,7 @@ // This is RAMPS-compatible using a single 10-pin connector. // (For CR-10 owners who want to replace the Melzi Creality board but retain the display) // -//#define CR10_STOCKDISPLAY +#define CR10_STOCKDISPLAY // // Ender-2 OEM display, a variant of the MKS_MINI_12864 diff --git a/config/examples/Creality/CR-10 Mini/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h b/config/examples/Creality/CR-10 Mini/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h index 5335fa012a..a817a2c134 100644 --- a/config/examples/Creality/CR-10 Mini/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h +++ b/config/examples/Creality/CR-10 Mini/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h @@ -1,6 +1,6 @@ /** * Marlin 3D Printer Firmware - * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * Copyright (c) 2021 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * * Based on Sprinter and grbl. * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Creality/CR-10 Mini/BigTreeTech SKR Mini E3 2.0" + /** * Configuration_adv.h * @@ -461,7 +463,7 @@ * The fan turns on automatically whenever any driver is enabled and turns * off (or reduces to idle speed) shortly after drivers are turned off. */ -//#define USE_CONTROLLER_FAN +#define USE_CONTROLLER_FAN #if ENABLED(USE_CONTROLLER_FAN) //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan //#define CONTROLLER_FAN_USE_Z_ONLY // With this option only the Z axis is considered @@ -470,7 +472,7 @@ #define CONTROLLERFAN_SPEED_ACTIVE 255 // (0-255) Active speed, used when any motor is enabled #define CONTROLLERFAN_SPEED_IDLE 0 // (0-255) Idle speed, used when motors are disabled #define CONTROLLERFAN_IDLE_TIME 60 // (seconds) Extra time to keep the fan running after disabling motors - //#define CONTROLLER_FAN_EDITABLE // Enable M710 configurable settings + #define CONTROLLER_FAN_EDITABLE // Enable M710 configurable settings #if ENABLED(CONTROLLER_FAN_EDITABLE) #define CONTROLLER_FAN_MENU // Enable the Controller Fan submenu #endif @@ -736,12 +738,12 @@ //#define SENSORLESS_BACKOFF_MM { 2, 2 } // (mm) Backoff from endstops before sensorless homing -#define HOMING_BUMP_MM { 5, 5, 2 } // (mm) Backoff from endstops after first bump +#define HOMING_BUMP_MM { 0, 0, 2 } // (mm) Backoff from endstops after first bump #define HOMING_BUMP_DIVISOR { 2, 2, 4 } // Re-Bump Speed Divisor (Divides the Homing Feedrate) //#define HOMING_BACKOFF_POST_MM { 2, 2, 2 } // (mm) Backoff from endstops after homing -//#define QUICK_HOME // If G28 contains XY do a diagonal move first +#define QUICK_HOME // If G28 contains XY do a diagonal move first //#define HOME_Y_BEFORE_X // If G28 contains XY home Y before X //#define HOME_Z_FIRST // Home Z first. Requires a Z-MIN endstop (not a probe). //#define CODEPENDENT_XY_HOMING // If X/Y can't home without homing Y/X first @@ -792,7 +794,7 @@ * differs, a mode set eeprom write will be completed at initialization. * Use the option below to force an eeprom write to a V3.1 probe regardless. */ - //#define BLTOUCH_SET_5V_MODE + #define BLTOUCH_SET_5V_MODE /** * Safety: Activate if connecting a probe with an unknown voltage mode. @@ -1175,7 +1177,7 @@ #endif // Include a page of printer information in the LCD Main Menu - //#define LCD_INFO_MENU + #define LCD_INFO_MENU #if ENABLED(LCD_INFO_MENU) //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages #endif @@ -1229,7 +1231,7 @@ #endif // Scroll a longer status message into view - //#define STATUS_MESSAGE_SCROLLING + #define STATUS_MESSAGE_SCROLLING // On the Info Screen, display XY with one decimal place when possible //#define LCD_DECIMAL_SMALL_XY @@ -1361,16 +1363,16 @@ * - SDSORT_CACHE_NAMES will retain the sorted file listing in RAM. (Expensive!) * - SDSORT_DYNAMIC_RAM only uses RAM when the SD menu is visible. (Use with caution!) */ - //#define SDCARD_SORT_ALPHA + #define SDCARD_SORT_ALPHA // SD Card Sorting options #if ENABLED(SDCARD_SORT_ALPHA) #define SDSORT_LIMIT 40 // Maximum number of sorted items (10-256). Costs 27 bytes each. #define FOLDER_SORTING -1 // -1=above 0=none 1=below #define SDSORT_GCODE false // Allow turning sorting on/off with LCD and M34 G-code. - #define SDSORT_USES_RAM false // Pre-allocate a static array for faster pre-sorting. + #define SDSORT_USES_RAM true // Pre-allocate a static array for faster pre-sorting. #define SDSORT_USES_STACK false // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.) - #define SDSORT_CACHE_NAMES false // Keep sorted items in RAM longer for speedy performance. Most expensive option. + #define SDSORT_CACHE_NAMES true // Keep sorted items in RAM longer for speedy performance. Most expensive option. #define SDSORT_DYNAMIC_RAM false // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use! #define SDSORT_CACHE_VFATS 2 // Maximum number of 13-byte VFAT entries to use for sorting. // Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM. @@ -1381,10 +1383,10 @@ //#define UTF_FILENAME_SUPPORT // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT + #define LONG_FILENAME_HOST_SUPPORT // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES + #define SCROLL_LONG_FILENAMES // Leave the heaters on after Stop Print (not recommended!) //#define SD_ABORT_NO_COOLDOWN @@ -1476,7 +1478,7 @@ * * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] */ - //#define SDCARD_CONNECTION LCD + #define SDCARD_CONNECTION ONBOARD // Enable if SD detect is rendered useless (e.g., by using an SD extender) //#define NO_SD_DETECT @@ -1790,7 +1792,7 @@ * * Warning: Does not respect endstops! */ -//#define BABYSTEPPING +#define BABYSTEPPING #if ENABLED(BABYSTEPPING) //#define INTEGRATED_BABYSTEPPING // EXPERIMENTAL integration of babystepping into the Stepper ISR //#define BABYSTEP_WITHOUT_HOMING @@ -1801,7 +1803,7 @@ #define BABYSTEP_MULTIPLICATOR_Z 1 // (steps or mm) Steps or millimeter distance for each Z babystep #define BABYSTEP_MULTIPLICATOR_XY 1 // (steps or mm) Steps or millimeter distance for each XY babystep - //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. + #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. // Note: Extra time may be added to mitigate controller latency. @@ -1837,12 +1839,12 @@ * * See https://marlinfw.org/docs/features/lin_advance.html for full instructions. */ -//#define LIN_ADVANCE +#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) //#define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants - #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed + #define LIN_ADVANCE_K 0.0 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // If enabled, this will generate debug information output over USB. - //#define EXPERIMENTAL_SCURVE // Enable this option to permit S-Curve Acceleration + #define EXPERIMENTAL_SCURVE // Enable this option to permit S-Curve Acceleration #endif // @section leveling @@ -1989,7 +1991,7 @@ #define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle //#define ARC_SEGMENTS_PER_SEC 50 // Use feedrate to choose segment length (with MM_PER_ARC_SEGMENT as the minimum) #define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections - //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles + #define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes //#define SF_ARC_FIX // Enable only if using SkeinForge with "Arc Point" fillet procedure #endif @@ -2091,7 +2093,7 @@ // The ASCII buffer for serial input #define MAX_CMD_SIZE 96 -#define BUFSIZE 4 +#define BUFSIZE 32 // Transmission to Host Buffer Size // To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0. @@ -2100,7 +2102,7 @@ // For debug-echo: 128 bytes for the optimal speed. // Other output doesn't need to be that speedy. // :[0, 2, 4, 8, 16, 32, 64, 128, 256] -#define TX_BUFFER_SIZE 0 +#define TX_BUFFER_SIZE 16 // Host Receive Buffer Size // Without XON/XOFF flow control (see SERIAL_XON_XOFF below) 32 bytes should be enough. @@ -2141,7 +2143,7 @@ * Currently handles M108, M112, M410, M876 * NOTE: Not yet implemented for all platforms. */ -//#define EMERGENCY_PARSER +#define EMERGENCY_PARSER /** * Realtime Reporting (requires EMERGENCY_PARSER) @@ -2170,7 +2172,7 @@ //#define NO_TIMEOUTS 1000 // Milliseconds // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. -//#define ADVANCED_OK +#define ADVANCED_OK // Printrun may have trouble receiving long strings all at once. // This option inserts short delays between lines of serial output. @@ -2311,14 +2313,14 @@ * * Enable PARK_HEAD_ON_PAUSE to add the G-code M125 Pause and Park. */ -//#define ADVANCED_PAUSE_FEATURE +#define ADVANCED_PAUSE_FEATURE #if ENABLED(ADVANCED_PAUSE_FEATURE) #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. // This short retract is done immediately, before parking the nozzle. #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast. #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload. + #define FILAMENT_CHANGE_UNLOAD_LENGTH 400 // (mm) The length of filament for a complete unload. // For Bowden, the full length of the tube and nozzle. // For direct drive, the full length of the nozzle. // Set to 0 for manual unloading. @@ -2327,7 +2329,7 @@ // 0 to disable start loading and skip to fast load only #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast. #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle. + #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 350 // (mm) Load length of filament, from extruder gear to nozzle. // For Bowden, the full length of the tube and nozzle. // For direct drive, the full length of the nozzle. //#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted. @@ -2349,10 +2351,10 @@ #define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed. #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change. - //#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. - //#define HOME_BEFORE_FILAMENT_CHANGE // If needed, home before parking for filament change + #define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. + #define HOME_BEFORE_FILAMENT_CHANGE // If needed, home before parking for filament change - //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. + #define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) #endif @@ -2493,8 +2495,8 @@ #define INTERPOLATE true #if AXIS_IS_TMC(X) - #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. - #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for sensorless homing + #define X_CURRENT 580 // (mA) RMS current. Multiply by 1.414 for peak current. + #define X_CURRENT_HOME (X_CURRENT/2) // (mA) RMS current for sensorless homing #define X_MICROSTEPS 16 // 0..256 #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... @@ -2511,7 +2513,7 @@ #endif #if AXIS_IS_TMC(Y) - #define Y_CURRENT 800 + #define Y_CURRENT 580 #define Y_CURRENT_HOME Y_CURRENT #define Y_MICROSTEPS 16 #define Y_RSENSE 0.11 @@ -2529,7 +2531,7 @@ #endif #if AXIS_IS_TMC(Z) - #define Z_CURRENT 800 + #define Z_CURRENT 580 #define Z_CURRENT_HOME Z_CURRENT #define Z_MICROSTEPS 16 #define Z_RSENSE 0.11 @@ -2565,7 +2567,7 @@ #endif #if AXIS_IS_TMC(E0) - #define E0_CURRENT 800 + #define E0_CURRENT 650 #define E0_MICROSTEPS 16 #define E0_RSENSE 0.11 #define E0_CHAIN_POS -1 @@ -2811,16 +2813,16 @@ #if EITHER(SENSORLESS_HOMING, SENSORLESS_PROBING) // TMC2209: 0...255. TMC2130: -64...63 - #define X_STALL_SENSITIVITY 8 + #define X_STALL_SENSITIVITY 75 #define X2_STALL_SENSITIVITY X_STALL_SENSITIVITY - #define Y_STALL_SENSITIVITY 8 + #define Y_STALL_SENSITIVITY 75 #define Y2_STALL_SENSITIVITY Y_STALL_SENSITIVITY //#define Z_STALL_SENSITIVITY 8 //#define Z2_STALL_SENSITIVITY Z_STALL_SENSITIVITY //#define Z3_STALL_SENSITIVITY Z_STALL_SENSITIVITY //#define Z4_STALL_SENSITIVITY Z_STALL_SENSITIVITY //#define SPI_ENDSTOPS // TMC2130 only - //#define IMPROVE_HOMING_RELIABILITY + #define IMPROVE_HOMING_RELIABILITY #endif /** @@ -2839,7 +2841,7 @@ * Beta feature! * Create a 50/50 square wave step pulse optimal for stepper drivers. */ - //#define SQUARE_WAVE_STEPPING + #define SQUARE_WAVE_STEPPING /** * Enable M122 debugging command for TMC stepper drivers. @@ -3242,7 +3244,7 @@ * This allows the laser to keep in perfect sync with the planner and removes * the powerup/down delay since lasers require negligible time. */ - //#define LASER_POWER_INLINE + #define LASER_POWER_INLINE #if ENABLED(LASER_POWER_INLINE) /** diff --git a/config/examples/Creality/CR-10 Mini/CrealityV1/Configuration.h b/config/examples/Creality/CR-10 Mini/CrealityV1/Configuration.h index 78c2dc9160..64acafba50 100644 --- a/config/examples/Creality/CR-10 Mini/CrealityV1/Configuration.h +++ b/config/examples/Creality/CR-10 Mini/CrealityV1/Configuration.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Creality/CR-10 Mini/CrealityV1" + /** * Configuration.h * @@ -35,6 +37,15 @@ * * Advanced settings can be found in Configuration_adv.h */ + +/** + * Creality CR-10 Mini + * X=300mm Y=220mm Z=300mm + * E3DV6 Hotend + * Titan Extruder + * CR10_STOCKDISPLAY (RAMPS-compatible with single 10-pin plug) + */ + #define CONFIGURATION_H_VERSION 02000801 //=========================================================================== @@ -87,10 +98,10 @@ #define SHOW_BOOTSCREEN // Show the bitmap in Marlin/_Bootscreen.h on startup. -//#define SHOW_CUSTOM_BOOTSCREEN +#define SHOW_CUSTOM_BOOTSCREEN // Show the bitmap in Marlin/_Statusscreen.h on the status screen. -//#define CUSTOM_STATUS_SCREEN_IMAGE +#define CUSTOM_STATUS_SCREEN_IMAGE // @section machine @@ -127,18 +138,18 @@ * * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ -#define BAUDRATE 250000 +#define BAUDRATE 115200 // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH // Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_RAMPS_14_EFB + #define MOTHERBOARD BOARD_MELZI_CREALITY #endif // Name displayed in the LCD "Ready" message and Info menu -//#define CUSTOM_MACHINE_NAME "3D Printer" +#define CUSTOM_MACHINE_NAME "CR-10 Mini" // Printer's unique ID, used by some programs to differentiate between machines. // Choose your own or use a service like https://www.uuidgenerator.net/version4 @@ -424,7 +435,7 @@ #define TEMP_SENSOR_5 0 #define TEMP_SENSOR_6 0 #define TEMP_SENSOR_7 0 -#define TEMP_SENSOR_BED 0 +#define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 #define TEMP_SENSOR_COOLER 0 @@ -480,7 +491,7 @@ #define HEATER_5_MAXTEMP 275 #define HEATER_6_MAXTEMP 275 #define HEATER_7_MAXTEMP 275 -#define BED_MAXTEMP 150 +#define BED_MAXTEMP 120 #define CHAMBER_MAXTEMP 60 /** @@ -505,21 +516,22 @@ #define PID_K1 0.95 // Smoothing factor within any PID loop #if ENABLED(PIDTEMP) - //#define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) - //#define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) + #define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) + #define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) // Set/get with gcode: M301 E[extruder number, 0-2] + // Stock CR-10 tuned for 70C #if ENABLED(PID_PARAMS_PER_HOTEND) // Specify between 1 and HOTENDS values per array. // If fewer than EXTRUDER values are provided, the last element will be repeated. - #define DEFAULT_Kp_LIST { 22.20, 22.20 } - #define DEFAULT_Ki_LIST { 1.08, 1.08 } - #define DEFAULT_Kd_LIST { 114.00, 114.00 } + #define DEFAULT_Kp_LIST { 22.57, 22.57 } + #define DEFAULT_Ki_LIST { 1.72, 1.72 } + #define DEFAULT_Kd_LIST { 73.96, 73.96 } #else - #define DEFAULT_Kp 22.20 - #define DEFAULT_Ki 1.08 - #define DEFAULT_Kd 114.00 + #define DEFAULT_Kp 22.57 + #define DEFAULT_Ki 1.72 + #define DEFAULT_Kd 73.96 #endif #endif // PIDTEMP @@ -540,7 +552,7 @@ * heater. If your configuration is significantly different than this and you don't understand * the issues involved, don't use bed PID until someone else verifies that your hardware works. */ -//#define PIDTEMPBED +#define PIDTEMPBED //#define BED_LIMIT_SWITCHING @@ -556,11 +568,10 @@ //#define MIN_BED_POWER 0 //#define PID_BED_DEBUG // Sends debug data to the serial port. - // 120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - // from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) - #define DEFAULT_bedKp 10.00 - #define DEFAULT_bedKi .023 - #define DEFAULT_bedKd 305.4 + // Stock CR-10 Bed Tuned for 70C + #define DEFAULT_bedKp 426.68 + #define DEFAULT_bedKi 78.92 + #define DEFAULT_bedKd 576.71 // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. #endif // PIDTEMPBED @@ -634,7 +645,7 @@ * Note: For Bowden Extruders make this large enough to allow load/unload. */ #define PREVENT_LENGTHY_EXTRUDE -#define EXTRUDE_MAXLENGTH 200 +#define EXTRUDE_MAXLENGTH 1000 //=========================================================================== //======================== Thermal Runaway Protection ======================= @@ -691,7 +702,7 @@ //#define USE_ZMAX_PLUG // Enable pullup for all endstops to prevent a floating state -#define ENDSTOPPULLUPS +//#define ENDSTOPPULLUPS #if DISABLED(ENDSTOPPULLUPS) // Disable ENDSTOPPULLUPS to set pullups individually //#define ENDSTOPPULLUP_XMAX @@ -806,14 +817,14 @@ * Override with M92 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 500 } +#define DEFAULT_AXIS_STEPS_PER_UNIT { 79.60, 80, 400, 95 } /** * Default Max Feed Rate (mm/s) * Override with M203 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 } +#define DEFAULT_MAX_FEEDRATE { 500, 500, 15, 25 } //#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 #if ENABLED(LIMITED_MAX_FR_EDITING) @@ -826,7 +837,7 @@ * Override with M201 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 } +#define DEFAULT_MAX_ACCELERATION { 500, 500, 100, 5000 } //#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 #if ENABLED(LIMITED_MAX_ACCEL_EDITING) @@ -841,9 +852,9 @@ * M204 R Retract Acceleration * M204 T Travel Acceleration */ -#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves +#define DEFAULT_ACCELERATION 600 // X, Y, Z and E acceleration for printing moves +#define DEFAULT_RETRACT_ACCELERATION 1000 // E acceleration for retracts +#define DEFAULT_TRAVEL_ACCELERATION 1000 // X, Y, Z acceleration for travel (non printing) moves /** * Default Jerk limits (mm/s) @@ -877,7 +888,7 @@ * https://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html */ #if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.013 // (mm) Distance from real junction edge + #define JUNCTION_DEVIATION_MM 0.067 // (mm) Distance from real junction edge #define JD_HANDLE_SMALL_SEGMENTS // Use curvature estimation instead of just the junction angle // for small segments (< 1mm) with large junction angles (> 135°). #endif @@ -1190,14 +1201,14 @@ // @section machine // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR false +#define INVERT_X_DIR true #define INVERT_Y_DIR true #define INVERT_Z_DIR false // @section extruder // For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR false +#define INVERT_E0_DIR true #define INVERT_E1_DIR false #define INVERT_E2_DIR false #define INVERT_E3_DIR false @@ -1218,7 +1229,7 @@ */ //#define Z_IDLE_HEIGHT Z_HOME_POS -//#define Z_HOMING_HEIGHT 4 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ... +//#define Z_HOMING_HEIGHT 5 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ... // Be sure to have this much clearance over your Z_MAX_POS to prevent grinding. //#define Z_AFTER_HOMING 10 // (mm) Height to move to after homing Z @@ -1232,8 +1243,8 @@ // @section machine // The size of the printable area -#define X_BED_SIZE 200 -#define Y_BED_SIZE 200 +#define X_BED_SIZE 300 +#define Y_BED_SIZE 220 // Travel limits (mm) after homing, corresponding to endstop positions. #define X_MIN_POS 0 @@ -1241,7 +1252,7 @@ #define Z_MIN_POS 0 #define X_MAX_POS X_BED_SIZE #define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 200 +#define Z_MAX_POS 300 /** * Software Endstops @@ -1595,7 +1606,7 @@ #endif // Homing speeds (mm/min) -#define HOMING_FEEDRATE_MM_M { (50*60), (50*60), (4*60) } +#define HOMING_FEEDRATE_MM_M { (20*60), (20*60), (4*60) } // Validate that endstops are triggered on homing moves #define VALIDATE_HOMING_ENDSTOPS @@ -1672,7 +1683,7 @@ * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) */ -//#define EEPROM_SETTINGS // Persistent storage with M500 and M501 +#define EEPROM_SETTINGS // Persistent storage with M500 and M501 //#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. #define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load @@ -1706,7 +1717,7 @@ // Preheat Constants - Up to 5 are supported without changes // #define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 180 +#define PREHEAT_1_TEMP_HOTEND 200 #define PREHEAT_1_TEMP_BED 70 #define PREHEAT_1_TEMP_CHAMBER 35 #define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 @@ -1921,7 +1932,7 @@ * * :['JAPANESE', 'WESTERN', 'CYRILLIC'] */ -#define DISPLAY_CHARSET_HD44780 JAPANESE +#define DISPLAY_CHARSET_HD44780 WESTERN /** * Info Screen Style (0:Classic, 1:Průša) @@ -1936,7 +1947,7 @@ * SD Card support is disabled by default. If your controller has an SD slot, * you must uncomment the following option or it won't work. */ -//#define SDSUPPORT +#define SDSUPPORT /** * SD CARD: ENABLE CRC @@ -2014,7 +2025,7 @@ // If you have a speaker that can produce tones, enable it here. // By default Marlin assumes you have a buzzer with a fixed frequency. // -//#define SPEAKER +#define SPEAKER // // The duration and frequency for the UI feedback sound. @@ -2287,7 +2298,7 @@ // This is RAMPS-compatible using a single 10-pin connector. // (For CR-10 owners who want to replace the Melzi Creality board but retain the display) // -//#define CR10_STOCKDISPLAY +#define CR10_STOCKDISPLAY // // Ender-2 OEM display, a variant of the MKS_MINI_12864 diff --git a/config/examples/Creality/CR-10 Mini/CrealityV1/Configuration_adv.h b/config/examples/Creality/CR-10 Mini/CrealityV1/Configuration_adv.h index 5335fa012a..edeaeae225 100644 --- a/config/examples/Creality/CR-10 Mini/CrealityV1/Configuration_adv.h +++ b/config/examples/Creality/CR-10 Mini/CrealityV1/Configuration_adv.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Creality/CR-10 Mini/CrealityV1" + /** * Configuration_adv.h * @@ -741,7 +743,7 @@ //#define HOMING_BACKOFF_POST_MM { 2, 2, 2 } // (mm) Backoff from endstops after homing -//#define QUICK_HOME // If G28 contains XY do a diagonal move first +#define QUICK_HOME // If G28 contains XY do a diagonal move first //#define HOME_Y_BEFORE_X // If G28 contains XY home Y before X //#define HOME_Z_FIRST // Home Z first. Requires a Z-MIN endstop (not a probe). //#define CODEPENDENT_XY_HOMING // If X/Y can't home without homing Y/X first @@ -792,7 +794,7 @@ * differs, a mode set eeprom write will be completed at initialization. * Use the option below to force an eeprom write to a V3.1 probe regardless. */ - //#define BLTOUCH_SET_5V_MODE + #define BLTOUCH_SET_5V_MODE /** * Safety: Activate if connecting a probe with an unknown voltage mode. @@ -867,7 +869,7 @@ // On a 300mm bed a 5% grade would give a misalignment of ~1.5cm #define G34_MAX_GRADE 5 // (%) Maximum incline that G34 will handle - #define Z_STEPPER_ALIGN_ITERATIONS 5 // Number of iterations to apply during alignment + #define Z_STEPPER_ALIGN_ITERATIONS 3 // Number of iterations to apply during alignment #define Z_STEPPER_ALIGN_ACC 0.02 // Stop iterating early if the accuracy is better than this #define RESTORE_LEVELING_AFTER_G34 // Restore leveling after G34 is done? // After G34, re-home Z (G28 Z) or just calculate it from the last probe heights? @@ -1175,7 +1177,7 @@ #endif // Include a page of printer information in the LCD Main Menu - //#define LCD_INFO_MENU + #define LCD_INFO_MENU #if ENABLED(LCD_INFO_MENU) //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages #endif @@ -1229,7 +1231,7 @@ #endif // Scroll a longer status message into view - //#define STATUS_MESSAGE_SCROLLING + #define STATUS_MESSAGE_SCROLLING // On the Info Screen, display XY with one decimal place when possible //#define LCD_DECIMAL_SMALL_XY @@ -1384,7 +1386,7 @@ //#define LONG_FILENAME_HOST_SUPPORT // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES + #define SCROLL_LONG_FILENAMES // Leave the heaters on after Stop Print (not recommended!) //#define SD_ABORT_NO_COOLDOWN @@ -1790,7 +1792,7 @@ * * Warning: Does not respect endstops! */ -//#define BABYSTEPPING +#define BABYSTEPPING #if ENABLED(BABYSTEPPING) //#define INTEGRATED_BABYSTEPPING // EXPERIMENTAL integration of babystepping into the Stepper ISR //#define BABYSTEP_WITHOUT_HOMING @@ -1801,7 +1803,7 @@ #define BABYSTEP_MULTIPLICATOR_Z 1 // (steps or mm) Steps or millimeter distance for each Z babystep #define BABYSTEP_MULTIPLICATOR_XY 1 // (steps or mm) Steps or millimeter distance for each XY babystep - //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. + #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. // Note: Extra time may be added to mitigate controller latency. @@ -2314,18 +2316,18 @@ //#define ADVANCED_PAUSE_FEATURE #if ENABLED(ADVANCED_PAUSE_FEATURE) #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. - #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. + #define PAUSE_PARK_RETRACT_LENGTH 4 // (mm) Initial retract. // This short retract is done immediately, before parking the nozzle. #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast. #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload. + #define FILAMENT_CHANGE_UNLOAD_LENGTH 420 // (mm) The length of filament for a complete unload. // For Bowden, the full length of the tube and nozzle. // For direct drive, the full length of the nozzle. // Set to 0 for manual unloading. #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE 6 // (mm/s) Slow move when starting load. #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 0 // (mm) Slow length, to allow time to insert material. // 0 to disable start loading and skip to fast load only - #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast. + #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 8 // (mm/s) Load filament feedrate. This can be pretty fast. #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle. // For Bowden, the full length of the tube and nozzle. @@ -2345,12 +2347,12 @@ #define FILAMENT_UNLOAD_PURGE_LENGTH 8 // (mm) An unretract is done, then this length is purged. #define FILAMENT_UNLOAD_PURGE_FEEDRATE 25 // (mm/s) feedrate to purge before unload - #define PAUSE_PARK_NOZZLE_TIMEOUT 45 // (seconds) Time limit before the nozzle is turned off for safety. - #define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed. + #define PAUSE_PARK_NOZZLE_TIMEOUT 120 // (seconds) Time limit before the nozzle is turned off for safety. + #define FILAMENT_CHANGE_ALERT_BEEPS 6 // Number of alert beeps to play when a response is needed. #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change. - //#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. - //#define HOME_BEFORE_FILAMENT_CHANGE // If needed, home before parking for filament change + #define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. + #define HOME_BEFORE_FILAMENT_CHANGE // If needed, home before parking for filament change //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) @@ -2493,7 +2495,7 @@ #define INTERPOLATE true #if AXIS_IS_TMC(X) - #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. + #define X_CURRENT 580 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for sensorless homing #define X_MICROSTEPS 16 // 0..256 #define X_RSENSE 0.11 @@ -2511,7 +2513,7 @@ #endif #if AXIS_IS_TMC(Y) - #define Y_CURRENT 800 + #define Y_CURRENT 580 #define Y_CURRENT_HOME Y_CURRENT #define Y_MICROSTEPS 16 #define Y_RSENSE 0.11 @@ -2529,7 +2531,7 @@ #endif #if AXIS_IS_TMC(Z) - #define Z_CURRENT 800 + #define Z_CURRENT 580 #define Z_CURRENT_HOME Z_CURRENT #define Z_MICROSTEPS 16 #define Z_RSENSE 0.11 @@ -2565,7 +2567,7 @@ #endif #if AXIS_IS_TMC(E0) - #define E0_CURRENT 800 + #define E0_CURRENT 650 #define E0_MICROSTEPS 16 #define E0_RSENSE 0.11 #define E0_CHAIN_POS -1 diff --git a/config/examples/Creality/CR-10 Mini/MEEB-3DP/Configuration.h b/config/examples/Creality/CR-10 Mini/MEEB-3DP/Configuration.h index 78c2dc9160..fe4b056a41 100644 --- a/config/examples/Creality/CR-10 Mini/MEEB-3DP/Configuration.h +++ b/config/examples/Creality/CR-10 Mini/MEEB-3DP/Configuration.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Creality/CR-10 Mini/MEEB-3DP" + /** * Configuration.h * @@ -69,7 +71,7 @@ // @section info // Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes. +#define STRING_CONFIG_H_AUTHOR "(ccrobot-online, MEEB_3DP)" // Who made the changes. //#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) /** @@ -87,10 +89,10 @@ #define SHOW_BOOTSCREEN // Show the bitmap in Marlin/_Bootscreen.h on startup. -//#define SHOW_CUSTOM_BOOTSCREEN +#define SHOW_CUSTOM_BOOTSCREEN // Show the bitmap in Marlin/_Statusscreen.h on the status screen. -//#define CUSTOM_STATUS_SCREEN_IMAGE +#define CUSTOM_STATUS_SCREEN_IMAGE // @section machine @@ -102,14 +104,14 @@ * * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] */ -#define SERIAL_PORT 0 +#define SERIAL_PORT -1 /** * Select a secondary serial port on the board to use for communication with the host. * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] */ -//#define SERIAL_PORT_2 -1 +#define SERIAL_PORT_2 1 /** * Select a third serial port on the board to use for communication with the host. @@ -127,22 +129,22 @@ * * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ -#define BAUDRATE 250000 +#define BAUDRATE 115200 // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH // Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_RAMPS_14_EFB + #define MOTHERBOARD BOARD_CCROBOT_MEEB_3DP #endif // Name displayed in the LCD "Ready" message and Info menu -//#define CUSTOM_MACHINE_NAME "3D Printer" +#define CUSTOM_MACHINE_NAME "CR10-mini" // Printer's unique ID, used by some programs to differentiate between machines. // Choose your own or use a service like https://www.uuidgenerator.net/version4 -//#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" +#define MACHINE_UUID "9cddc618-9fca-11ea-bb37-0242ac130002" // @section extruder @@ -424,7 +426,7 @@ #define TEMP_SENSOR_5 0 #define TEMP_SENSOR_6 0 #define TEMP_SENSOR_7 0 -#define TEMP_SENSOR_BED 0 +#define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 #define TEMP_SENSOR_COOLER 0 @@ -480,7 +482,7 @@ #define HEATER_5_MAXTEMP 275 #define HEATER_6_MAXTEMP 275 #define HEATER_7_MAXTEMP 275 -#define BED_MAXTEMP 150 +#define BED_MAXTEMP 100 #define CHAMBER_MAXTEMP 60 /** @@ -505,21 +507,21 @@ #define PID_K1 0.95 // Smoothing factor within any PID loop #if ENABLED(PIDTEMP) - //#define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) - //#define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) + #define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) + #define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) // Set/get with gcode: M301 E[extruder number, 0-2] #if ENABLED(PID_PARAMS_PER_HOTEND) // Specify between 1 and HOTENDS values per array. // If fewer than EXTRUDER values are provided, the last element will be repeated. - #define DEFAULT_Kp_LIST { 22.20, 22.20 } - #define DEFAULT_Ki_LIST { 1.08, 1.08 } - #define DEFAULT_Kd_LIST { 114.00, 114.00 } + #define DEFAULT_Kp_LIST { 25.20, 25.20 } + #define DEFAULT_Ki_LIST { 2.11, 2.11 } + #define DEFAULT_Kd_LIST { 75.35, 75.35 } #else - #define DEFAULT_Kp 22.20 - #define DEFAULT_Ki 1.08 - #define DEFAULT_Kd 114.00 + #define DEFAULT_Kp 25.20 + #define DEFAULT_Ki 2.11 + #define DEFAULT_Kd 75.35 #endif #endif // PIDTEMP @@ -540,7 +542,7 @@ * heater. If your configuration is significantly different than this and you don't understand * the issues involved, don't use bed PID until someone else verifies that your hardware works. */ -//#define PIDTEMPBED +#define PIDTEMPBED //#define BED_LIMIT_SWITCHING @@ -558,9 +560,9 @@ // 120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) // from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) - #define DEFAULT_bedKp 10.00 - #define DEFAULT_bedKi .023 - #define DEFAULT_bedKd 305.4 + #define DEFAULT_bedKp 356.34 + #define DEFAULT_bedKi 70.15 + #define DEFAULT_bedKd 452.51 // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. #endif // PIDTEMPBED @@ -634,7 +636,7 @@ * Note: For Bowden Extruders make this large enough to allow load/unload. */ #define PREVENT_LENGTHY_EXTRUDE -#define EXTRUDE_MAXLENGTH 200 +#define EXTRUDE_MAXLENGTH 500 //=========================================================================== //======================== Thermal Runaway Protection ======================= @@ -655,7 +657,7 @@ #define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders #define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed -#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber +//#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber #define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling //=========================================================================== @@ -743,15 +745,15 @@ * TMC5130, TMC5130_STANDALONE, TMC5160, TMC5160_STANDALONE * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'L6474', 'POWERSTEP01', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2160', 'TMC2160_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC2209', 'TMC2209_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE', 'TMC5160', 'TMC5160_STANDALONE'] */ -#define X_DRIVER_TYPE A4988 -#define Y_DRIVER_TYPE A4988 -#define Z_DRIVER_TYPE A4988 +#define X_DRIVER_TYPE TMC2208 +#define Y_DRIVER_TYPE TMC2208 +#define Z_DRIVER_TYPE TMC2208 //#define X2_DRIVER_TYPE A4988 //#define Y2_DRIVER_TYPE A4988 //#define Z2_DRIVER_TYPE A4988 //#define Z3_DRIVER_TYPE A4988 //#define Z4_DRIVER_TYPE A4988 -#define E0_DRIVER_TYPE A4988 +#define E0_DRIVER_TYPE TMC2208 //#define E1_DRIVER_TYPE A4988 //#define E2_DRIVER_TYPE A4988 //#define E3_DRIVER_TYPE A4988 @@ -762,7 +764,7 @@ // Enable this feature if all enabled endstop pins are interrupt-capable. // This will remove the need to poll the interrupt pins, saving many CPU cycles. -//#define ENDSTOP_INTERRUPTS_FEATURE +#define ENDSTOP_INTERRUPTS_FEATURE /** * Endstop Noise Threshold @@ -806,14 +808,14 @@ * Override with M92 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 500 } +#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 100, 97.5 } /** * Default Max Feed Rate (mm/s) * Override with M203 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 } +#define DEFAULT_MAX_FEEDRATE { 300, 300, 75, 300 } //#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 #if ENABLED(LIMITED_MAX_FR_EDITING) @@ -890,7 +892,7 @@ * * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained */ -//#define S_CURVE_ACCELERATION +#define S_CURVE_ACCELERATION //=========================================================================== //============================= Z Probe Options ============================= @@ -1065,7 +1067,7 @@ #define XY_PROBE_FEEDRATE (133*60) // Feedrate (mm/min) for the first approach when double-probing (MULTIPLE_PROBING == 2) -#define Z_PROBE_FEEDRATE_FAST (4*60) +#define Z_PROBE_FEEDRATE_FAST (25*60) // Feedrate (mm/min) for the "accurate" probe of each point #define Z_PROBE_FEEDRATE_SLOW (Z_PROBE_FEEDRATE_FAST / 2) @@ -1190,14 +1192,14 @@ // @section machine // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR false +#define INVERT_X_DIR true #define INVERT_Y_DIR true #define INVERT_Z_DIR false // @section extruder // For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR false +#define INVERT_E0_DIR true #define INVERT_E1_DIR false #define INVERT_E2_DIR false #define INVERT_E3_DIR false @@ -1208,7 +1210,7 @@ // @section homing -//#define NO_MOTION_BEFORE_HOMING // Inhibit movement until all axes have been homed. Also enable HOME_AFTER_DEACTIVATE for extra safety. +#define NO_MOTION_BEFORE_HOMING // Inhibit movement until all axes have been homed. Also enable HOME_AFTER_DEACTIVATE for extra safety. //#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated. Also enable NO_MOTION_BEFORE_HOMING for extra safety. /** @@ -1216,9 +1218,9 @@ * - Use a low value (i.e., Z_MIN_POS) if the nozzle falls down to the bed. * - Use a large value (i.e., Z_MAX_POS) if the bed falls down, away from the nozzle. */ -//#define Z_IDLE_HEIGHT Z_HOME_POS +#define Z_IDLE_HEIGHT Z_MAX_POS -//#define Z_HOMING_HEIGHT 4 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ... +#define Z_HOMING_HEIGHT 0 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ... // Be sure to have this much clearance over your Z_MAX_POS to prevent grinding. //#define Z_AFTER_HOMING 10 // (mm) Height to move to after homing Z @@ -1232,8 +1234,8 @@ // @section machine // The size of the printable area -#define X_BED_SIZE 200 -#define Y_BED_SIZE 200 +#define X_BED_SIZE 300 +#define Y_BED_SIZE 225 // Travel limits (mm) after homing, corresponding to endstop positions. #define X_MIN_POS 0 @@ -1241,7 +1243,7 @@ #define Z_MIN_POS 0 #define X_MAX_POS X_BED_SIZE #define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 200 +#define Z_MAX_POS 290 /** * Software Endstops @@ -1269,7 +1271,7 @@ #endif #if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS) - //#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD + #define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD #endif /** @@ -1527,13 +1529,13 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS +#define LEVEL_BED_CORNERS #if ENABLED(LEVEL_BED_CORNERS) #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner + #define LEVEL_CENTER_TOO // Move to the center after the last corner //#define LEVEL_CORNERS_USE_PROBE #if ENABLED(LEVEL_CORNERS_USE_PROBE) #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 @@ -1587,7 +1589,7 @@ // - Move the Z probe (or nozzle) to a defined XY point before Z Homing. // - Prevent Z homing when the Z probe is outside bed area. // -//#define Z_SAFE_HOMING +#define Z_SAFE_HOMING #if ENABLED(Z_SAFE_HOMING) #define Z_SAFE_HOMING_X_POINT X_CENTER // X point for Z homing @@ -1595,7 +1597,7 @@ #endif // Homing speeds (mm/min) -#define HOMING_FEEDRATE_MM_M { (50*60), (50*60), (4*60) } +#define HOMING_FEEDRATE_MM_M { (50*60), (50*60), (25*60) } // Validate that endstops are triggered on homing moves #define VALIDATE_HOMING_ENDSTOPS @@ -1672,10 +1674,10 @@ * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) */ -//#define EEPROM_SETTINGS // Persistent storage with M500 and M501 +#define EEPROM_SETTINGS // Persistent storage with M500 and M501 //#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. -#define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load +//#define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load #if ENABLED(EEPROM_SETTINGS) //#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. #endif @@ -1728,16 +1730,16 @@ * P1 Raise the nozzle always to Z-park height. * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. */ -//#define NOZZLE_PARK_FEATURE +#define NOZZLE_PARK_FEATURE #if ENABLED(NOZZLE_PARK_FEATURE) // Specify a park position as { X, Y, Z_raise } - #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 } + #define NOZZLE_PARK_POINT { (X_MIN_POS + 0), (Y_MIN_POS + 0), 40 } //#define NOZZLE_PARK_X_ONLY // X move only is required to park //#define NOZZLE_PARK_Y_ONLY // Y move only is required to park #define NOZZLE_PARK_Z_RAISE_MIN 2 // (mm) Always raise Z by at least this distance #define NOZZLE_PARK_XY_FEEDRATE 100 // (mm/s) X and Y axes feedrate (also used for delta Z axis) - #define NOZZLE_PARK_Z_FEEDRATE 5 // (mm/s) Z axis feedrate (not used for delta printers) + #define NOZZLE_PARK_Z_FEEDRATE 25 // (mm/s) Z axis feedrate (not used for delta printers) #endif /** @@ -1845,7 +1847,7 @@ * * View the current statistics with M78. */ -//#define PRINTCOUNTER +#define PRINTCOUNTER #if ENABLED(PRINTCOUNTER) #define PRINTCOUNTER_SAVE_INTERVAL 60 // (minutes) EEPROM save interval during print #endif @@ -2006,7 +2008,7 @@ // // Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. // -//#define INDIVIDUAL_AXIS_HOMING_MENU +#define INDIVIDUAL_AXIS_HOMING_MENU // // SPEAKER/BUZZER @@ -2287,7 +2289,7 @@ // This is RAMPS-compatible using a single 10-pin connector. // (For CR-10 owners who want to replace the Melzi Creality board but retain the display) // -//#define CR10_STOCKDISPLAY +#define CR10_STOCKDISPLAY // // Ender-2 OEM display, a variant of the MKS_MINI_12864 @@ -2682,16 +2684,16 @@ #endif // Support for Adafruit NeoPixel LED driver -//#define NEOPIXEL_LED +#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - #define NEOPIXEL_PIN 4 // LED driving pin + #define NEOPIXEL_TYPE NEO_GRB + //#define NEOPIXEL_PIN 4 // LED driving pin //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_PIXELS 17 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + //#define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 255 // Initial brightness (0-255) + #define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE diff --git a/config/examples/Creality/CR-10 Mini/MEEB-3DP/Configuration_adv.h b/config/examples/Creality/CR-10 Mini/MEEB-3DP/Configuration_adv.h index 5335fa012a..6b634aa6ad 100644 --- a/config/examples/Creality/CR-10 Mini/MEEB-3DP/Configuration_adv.h +++ b/config/examples/Creality/CR-10 Mini/MEEB-3DP/Configuration_adv.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Creality/CR-10 Mini/MEEB-3DP" + /** * Configuration_adv.h * @@ -437,10 +439,10 @@ * Hotend Idle Timeout * Prevent filament in the nozzle from charring and causing a critical jam. */ -//#define HOTEND_IDLE_TIMEOUT +#define HOTEND_IDLE_TIMEOUT #if ENABLED(HOTEND_IDLE_TIMEOUT) - #define HOTEND_IDLE_TIMEOUT_SEC (5*60) // (seconds) Time without extruder movement to trigger protection - #define HOTEND_IDLE_MIN_TRIGGER 180 // (°C) Minimum temperature to enable hotend protection + #define HOTEND_IDLE_TIMEOUT_SEC (3*60) // (seconds) Time without extruder movement to trigger protection + #define HOTEND_IDLE_MIN_TRIGGER 100 // (°C) Minimum temperature to enable hotend protection #define HOTEND_IDLE_NOZZLE_TARGET 0 // (°C) Safe temperature for the nozzle after timeout #define HOTEND_IDLE_BED_TARGET 0 // (°C) Safe temperature for the bed after timeout #endif @@ -461,16 +463,16 @@ * The fan turns on automatically whenever any driver is enabled and turns * off (or reduces to idle speed) shortly after drivers are turned off. */ -//#define USE_CONTROLLER_FAN +#define USE_CONTROLLER_FAN #if ENABLED(USE_CONTROLLER_FAN) - //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan + #define CONTROLLER_FAN_PIN FAN2_PIN //#define CONTROLLER_FAN_USE_Z_ONLY // With this option only the Z axis is considered //#define CONTROLLER_FAN_IGNORE_Z // Ignore Z stepper. Useful when stepper timeout is disabled. #define CONTROLLERFAN_SPEED_MIN 0 // (0-255) Minimum speed. (If set below this value the fan is turned off.) #define CONTROLLERFAN_SPEED_ACTIVE 255 // (0-255) Active speed, used when any motor is enabled - #define CONTROLLERFAN_SPEED_IDLE 0 // (0-255) Idle speed, used when motors are disabled + #define CONTROLLERFAN_SPEED_IDLE 127 #define CONTROLLERFAN_IDLE_TIME 60 // (seconds) Extra time to keep the fan running after disabling motors - //#define CONTROLLER_FAN_EDITABLE // Enable M710 configurable settings + #define CONTROLLER_FAN_EDITABLE // Enable M710 configurable settings #if ENABLED(CONTROLLER_FAN_EDITABLE) #define CONTROLLER_FAN_MENU // Enable the Controller Fan submenu #endif @@ -479,7 +481,7 @@ // When first starting the main fan, run it at full speed for the // given number of milliseconds. This gets the fan spinning reliably // before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) -//#define FAN_KICKSTART_TIME 100 +#define FAN_KICKSTART_TIME 200 // Some coolers may require a non-zero "off" state. //#define FAN_OFF_PWM 1 @@ -540,7 +542,7 @@ * Multiple extruders can be assigned to the same pin in which case * the fan will turn on when any selected extruder is above the threshold. */ -#define E0_AUTO_FAN_PIN -1 +#define E0_AUTO_FAN_PIN FAN1_PIN #define E1_AUTO_FAN_PIN -1 #define E2_AUTO_FAN_PIN -1 #define E3_AUTO_FAN_PIN -1 @@ -741,7 +743,7 @@ //#define HOMING_BACKOFF_POST_MM { 2, 2, 2 } // (mm) Backoff from endstops after homing -//#define QUICK_HOME // If G28 contains XY do a diagonal move first +#define QUICK_HOME // If G28 contains XY do a diagonal move first //#define HOME_Y_BEFORE_X // If G28 contains XY home Y before X //#define HOME_Z_FIRST // Home Z first. Requires a Z-MIN endstop (not a probe). //#define CODEPENDENT_XY_HOMING // If X/Y can't home without homing Y/X first @@ -942,7 +944,7 @@ // Increase the slowdown divisor for larger buffer sizes. #define SLOWDOWN #if ENABLED(SLOWDOWN) - #define SLOWDOWN_DIVISOR 2 + #define SLOWDOWN_DIVISOR 8 #endif /** @@ -1059,7 +1061,7 @@ * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the * lowest stepping frequencies. */ -//#define ADAPTIVE_STEP_SMOOTHING +#define ADAPTIVE_STEP_SMOOTHING /** * Custom Microstepping @@ -1150,7 +1152,7 @@ #endif // Play a beep when the feedrate is changed from the Status Screen -//#define BEEP_ON_FEEDRATE_CHANGE +#define BEEP_ON_FEEDRATE_CHANGE #if ENABLED(BEEP_ON_FEEDRATE_CHANGE) #define FEEDRATE_CHANGE_BEEP_DURATION 10 #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 @@ -1175,13 +1177,13 @@ #endif // Include a page of printer information in the LCD Main Menu - //#define LCD_INFO_MENU + #define LCD_INFO_MENU #if ENABLED(LCD_INFO_MENU) //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages #endif // BACK menu items keep the highlight at the top - //#define TURBO_BACK_MENU_ITEM + #define TURBO_BACK_MENU_ITEM // Add a mute option to the LCD menu //#define SOUND_MENU_ITEM @@ -1190,17 +1192,17 @@ * LED Control Menu * Add LED Control to the LCD menu */ - //#define LED_CONTROL_MENU + #define LED_CONTROL_MENU #if ENABLED(LED_CONTROL_MENU) #define LED_COLOR_PRESETS // Enable the Preset Color menu option //#define NEO2_COLOR_PRESETS // Enable a second NeoPixel Preset Color menu option #if ENABLED(LED_COLOR_PRESETS) - #define LED_USER_PRESET_RED 255 // User defined RED value - #define LED_USER_PRESET_GREEN 128 // User defined GREEN value - #define LED_USER_PRESET_BLUE 0 // User defined BLUE value + #define LED_USER_PRESET_RED 0 + #define LED_USER_PRESET_GREEN 0 + #define LED_USER_PRESET_BLUE 0 #define LED_USER_PRESET_WHITE 255 // User defined WHITE value #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity - //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup + #define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup #endif #if ENABLED(NEO2_COLOR_PRESETS) #define NEO2_USER_PRESET_RED 255 // User defined RED value @@ -1219,37 +1221,37 @@ #if HAS_DISPLAY // The timeout (in ms) to return to the status screen from sub-menus - //#define LCD_TIMEOUT_TO_STATUS 15000 + #define LCD_TIMEOUT_TO_STATUS 15000 #if ENABLED(SHOW_BOOTSCREEN) - #define BOOTSCREEN_TIMEOUT 4000 // (ms) Total Duration to display the boot screen(s) + #define BOOTSCREEN_TIMEOUT 500 // (ms) Total Duration to display the boot screen(s) #if EITHER(HAS_MARLINUI_U8GLIB, TFT_COLOR_UI) #define BOOT_MARLIN_LOGO_SMALL // Show a smaller Marlin logo on the Boot Screen (saving lots of flash) #endif #endif // Scroll a longer status message into view - //#define STATUS_MESSAGE_SCROLLING + #define STATUS_MESSAGE_SCROLLING // On the Info Screen, display XY with one decimal place when possible - //#define LCD_DECIMAL_SMALL_XY + #define LCD_DECIMAL_SMALL_XY // Add an 'M73' G-code to set the current percentage - //#define LCD_SET_PROGRESS_MANUALLY + #define LCD_SET_PROGRESS_MANUALLY // Show the E position (filament used) during printing - //#define LCD_SHOW_E_TOTAL + #define LCD_SHOW_E_TOTAL #endif #if EITHER(SDSUPPORT, LCD_SET_PROGRESS_MANUALLY) && ANY(HAS_MARLINUI_U8GLIB, HAS_MARLINUI_HD44780, IS_TFTGLCD_PANEL, EXTENSIBLE_UI) - //#define SHOW_REMAINING_TIME // Display estimated time to completion + #define SHOW_REMAINING_TIME // Display estimated time to completion #if ENABLED(SHOW_REMAINING_TIME) - //#define USE_M73_REMAINING_TIME // Use remaining time from M73 command instead of estimation - //#define ROTATE_PROGRESS_DISPLAY // Display (P)rogress, (E)lapsed, and (R)emaining time + #define USE_M73_REMAINING_TIME // Use remaining time from M73 command instead of estimation + #define ROTATE_PROGRESS_DISPLAY // Display (P)rogress, (E)lapsed, and (R)emaining time #endif #if EITHER(HAS_MARLINUI_U8GLIB, EXTENSIBLE_UI) - //#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits + #define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits #endif #if EITHER(HAS_MARLINUI_HD44780, IS_TFTGLCD_PANEL) @@ -1523,7 +1525,7 @@ // A bigger font is available for edit items. Costs 3120 bytes of PROGMEM. // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. - //#define USE_BIG_EDIT_FONT + #define USE_BIG_EDIT_FONT // A smaller font may be used on the Info Screen. Costs 2434 bytes of PROGMEM. // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. @@ -1571,14 +1573,14 @@ //#define STATUS_FLOWMETER_ANIM // Use multiple bitmaps to indicate coolant flow //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap - //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames - //#define STATUS_HEAT_PERCENT // Show heating in a progress bar - //#define BOOT_MARLIN_LOGO_ANIMATED // Animated Marlin logo. Costs ~‭3260 (or ~940) bytes of PROGMEM. + #define STATUS_FAN_FRAMES 4 + #define STATUS_HEAT_PERCENT // Show heating in a progress bar + #define BOOT_MARLIN_LOGO_ANIMATED // Animated Marlin logo. Costs ~‭3260 (or ~940) bytes of PROGMEM. // Frivolous Game Options - //#define MARLIN_BRICKOUT - //#define MARLIN_INVADERS - //#define MARLIN_SNAKE + #define MARLIN_BRICKOUT + #define MARLIN_INVADERS + #define MARLIN_SNAKE //#define GAMES_EASTER_EGG // Add extra blank lines above the "Games" sub-menu #endif // HAS_MARLINUI_U8GLIB @@ -1790,7 +1792,7 @@ * * Warning: Does not respect endstops! */ -//#define BABYSTEPPING +#define BABYSTEPPING #if ENABLED(BABYSTEPPING) //#define INTEGRATED_BABYSTEPPING // EXPERIMENTAL integration of babystepping into the Stepper ISR //#define BABYSTEP_WITHOUT_HOMING @@ -1798,20 +1800,20 @@ //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way //#define BABYSTEP_MILLIMETER_UNITS // Specify BABYSTEP_MULTIPLICATOR_(XY|Z) in mm instead of micro-steps - #define BABYSTEP_MULTIPLICATOR_Z 1 // (steps or mm) Steps or millimeter distance for each Z babystep + #define BABYSTEP_MULTIPLICATOR_Z 10 // (steps or mm) Steps or millimeter distance for each XY babystep #define BABYSTEP_MULTIPLICATOR_XY 1 // (steps or mm) Steps or millimeter distance for each XY babystep - //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. + #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. // Note: Extra time may be added to mitigate controller latency. - //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on doubleclick when printer is idle. + #define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on doubleclick when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) - #define MOVE_Z_IDLE_MULTIPLICATOR 1 // Multiply 1mm by this factor for the move step size. + #define MOVE_Z_IDLE_MULTIPLICATOR 10 #endif #endif - //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 + #define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping #if ENABLED(BABYSTEP_ZPROBE_OFFSET) @@ -1977,7 +1979,7 @@ // // G60/G61 Position Save and Return // -//#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +#define SAVED_POSITIONS 12 // // G2/G3 Arc Support @@ -1995,7 +1997,7 @@ #endif // Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes. -//#define BEZIER_CURVE_SUPPORT +#define BEZIER_CURVE_SUPPORT /** * Direct Stepping @@ -2005,7 +2007,7 @@ * less step aliasing by calculating all motions in advance. * Preparing your G-code: https://github.com/colinrgodsey/step-daemon */ -//#define DIRECT_STEPPING +#define DIRECT_STEPPING /** * G38 Probe Target @@ -2091,7 +2093,7 @@ // The ASCII buffer for serial input #define MAX_CMD_SIZE 96 -#define BUFSIZE 4 +#define BUFSIZE 32 // Transmission to Host Buffer Size // To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0. @@ -2100,13 +2102,13 @@ // For debug-echo: 128 bytes for the optimal speed. // Other output doesn't need to be that speedy. // :[0, 2, 4, 8, 16, 32, 64, 128, 256] -#define TX_BUFFER_SIZE 0 +#define TX_BUFFER_SIZE 32 // Host Receive Buffer Size // Without XON/XOFF flow control (see SERIAL_XON_XOFF below) 32 bytes should be enough. // To use flow control, set this buffer size to at least 1024 bytes. // :[0, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048] -//#define RX_BUFFER_SIZE 1024 +#define RX_BUFFER_SIZE 32 #if RX_BUFFER_SIZE >= 1024 // Enable to have the controller send XON/XOFF control characters to @@ -2115,7 +2117,7 @@ #endif // Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE +#define BAUD_RATE_GCODE #if ENABLED(SDSUPPORT) // Enable this option to collect and display the maximum @@ -2311,14 +2313,14 @@ * * Enable PARK_HEAD_ON_PAUSE to add the G-code M125 Pause and Park. */ -//#define ADVANCED_PAUSE_FEATURE +#define ADVANCED_PAUSE_FEATURE #if ENABLED(ADVANCED_PAUSE_FEATURE) #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. // This short retract is done immediately, before parking the nozzle. - #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast. + #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 30 // (mm/s) Unload filament feedrate. This can be pretty fast. #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload. + #define FILAMENT_CHANGE_UNLOAD_LENGTH 450 // (mm) The length of filament for a complete unload. // For Bowden, the full length of the tube and nozzle. // For direct drive, the full length of the nozzle. // Set to 0 for manual unloading. @@ -2327,17 +2329,17 @@ // 0 to disable start loading and skip to fast load only #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast. #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle. + #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 200 // (mm) Load length of filament, from extruder gear to nozzle. // For Bowden, the full length of the tube and nozzle. // For direct drive, the full length of the nozzle. - //#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted. + #define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted. #define ADVANCED_PAUSE_PURGE_FEEDRATE 3 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate. #define ADVANCED_PAUSE_PURGE_LENGTH 50 // (mm) Length to extrude after loading. // Set to 0 for manual extrusion. // Filament can be extruded repeatedly from the Filament Change menu // until extrusion is consistent, and to purge old filament. #define ADVANCED_PAUSE_RESUME_PRIME 0 // (mm) Extra distance to prime nozzle after returning from park. - //#define ADVANCED_PAUSE_FANS_PAUSE // Turn off print-cooling fans while the machine is paused. + #define ADVANCED_PAUSE_FANS_PAUSE // Turn off print-cooling fans while the machine is paused. // Filament Unload does a Retract, Delay, and Purge first: #define FILAMENT_UNLOAD_PURGE_RETRACT 13 // (mm) Unload initial retract length. @@ -2349,11 +2351,11 @@ #define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed. #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change. - //#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. - //#define HOME_BEFORE_FILAMENT_CHANGE // If needed, home before parking for filament change + #define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. + #define HOME_BEFORE_FILAMENT_CHANGE // If needed, home before parking for filament change - //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. - //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) + #define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. + #define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) #endif // @section tmc @@ -2493,10 +2495,10 @@ #define INTERPOLATE true #if AXIS_IS_TMC(X) - #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. + #define X_CURRENT 1000 #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for sensorless homing #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 + #define X_RSENSE 0.1 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis #endif @@ -2511,10 +2513,10 @@ #endif #if AXIS_IS_TMC(Y) - #define Y_CURRENT 800 + #define Y_CURRENT 1000 #define Y_CURRENT_HOME Y_CURRENT #define Y_MICROSTEPS 16 - #define Y_RSENSE 0.11 + #define Y_RSENSE 0.1 #define Y_CHAIN_POS -1 //#define Y_INTERPOLATE true #endif @@ -2529,10 +2531,10 @@ #endif #if AXIS_IS_TMC(Z) - #define Z_CURRENT 800 + #define Z_CURRENT 1000 #define Z_CURRENT_HOME Z_CURRENT - #define Z_MICROSTEPS 16 - #define Z_RSENSE 0.11 + #define Z_MICROSTEPS 4 + #define Z_RSENSE 0.1 #define Z_CHAIN_POS -1 //#define Z_INTERPOLATE true #endif @@ -2565,9 +2567,9 @@ #endif #if AXIS_IS_TMC(E0) - #define E0_CURRENT 800 + #define E0_CURRENT 1000 #define E0_MICROSTEPS 16 - #define E0_RSENSE 0.11 + #define E0_RSENSE 0.1 #define E0_CHAIN_POS -1 //#define E0_INTERPOLATE true #endif @@ -2702,7 +2704,7 @@ */ #define STEALTHCHOP_XY #define STEALTHCHOP_Z - #define STEALTHCHOP_E + //#define STEALTHCHOP_E /** * Optimize spreadCycle chopper parameters by using predefined parameter sets @@ -2748,7 +2750,7 @@ * M912 - Clear stepper driver overtemperature pre-warn condition flag. * M122 - Report driver parameters (Requires TMC_DEBUG) */ - //#define MONITOR_DRIVER_STATUS + #define MONITOR_DRIVER_STATUS #if ENABLED(MONITOR_DRIVER_STATUS) #define CURRENT_STEP_DOWN 50 // [mA] @@ -2765,15 +2767,15 @@ */ //#define HYBRID_THRESHOLD - #define X_HYBRID_THRESHOLD 100 // [mm/s] + #define X_HYBRID_THRESHOLD 130 #define X2_HYBRID_THRESHOLD 100 - #define Y_HYBRID_THRESHOLD 100 + #define Y_HYBRID_THRESHOLD 130 #define Y2_HYBRID_THRESHOLD 100 - #define Z_HYBRID_THRESHOLD 3 + #define Z_HYBRID_THRESHOLD 35 #define Z2_HYBRID_THRESHOLD 3 #define Z3_HYBRID_THRESHOLD 3 #define Z4_HYBRID_THRESHOLD 3 - #define E0_HYBRID_THRESHOLD 30 + #define E0_HYBRID_THRESHOLD 35 #define E1_HYBRID_THRESHOLD 30 #define E2_HYBRID_THRESHOLD 30 #define E3_HYBRID_THRESHOLD 30 @@ -2833,7 +2835,7 @@ * * Values from 0..1023, -1 to disable homing phase for that axis. */ - //#define TMC_HOME_PHASE { 896, 896, 896 } + #define TMC_HOME_PHASE { 896, 896, 896 } /** * Beta feature! @@ -2845,7 +2847,7 @@ * Enable M122 debugging command for TMC stepper drivers. * M122 S0/1 will enable continuous reporting. */ - //#define TMC_DEBUG + #define TMC_DEBUG /** * You can set your own advanced settings by filling in predefined functions. @@ -3104,7 +3106,7 @@ * Add the M240 G-code to take a photo. * The photo can be triggered by a digital pin or a physical movement. */ -//#define PHOTO_GCODE +#define PHOTO_GCODE #if ENABLED(PHOTO_GCODE) // A position to move to (and raise Z) before taking the photo //#define PHOTO_POSITION { X_MAX_POS - 5, Y_MAX_POS, 0 } // { xpos, ypos, zraise } (M240 X Y Z) @@ -3123,7 +3125,7 @@ //#define PHOTO_SWITCH_POSITION { X_MAX_POS, Y_MAX_POS } // { xpos, ypos } (M240 I J) // Duration to hold the switch or keep CHDK_PIN high - //#define PHOTO_SWITCH_MS 50 // (ms) (M240 D) + #define PHOTO_SWITCH_MS 50 /** * PHOTO_PULSES_US may need adjustment depending on board and camera model. @@ -3426,7 +3428,7 @@ */ #define EXTENDED_CAPABILITIES_REPORT #if ENABLED(EXTENDED_CAPABILITIES_REPORT) - //#define M115_GEOMETRY_REPORT + #define M115_GEOMETRY_REPORT #endif /** @@ -3434,7 +3436,7 @@ * Add the M16 G-code to compare a string to the MACHINE_NAME. * M16 with a non-matching string causes the printer to halt. */ -//#define EXPECTED_PRINTER_CHECK +#define EXPECTED_PRINTER_CHECK /** * Disable all Volumetric extrusion options @@ -3526,7 +3528,7 @@ * * Execute certain G-code commands immediately after power-on. */ -//#define STARTUP_COMMANDS "M17 Z" +#define STARTUP_COMMANDS "M300 S5000 P300" /** * G-code Macros @@ -3534,7 +3536,7 @@ * Add G-codes M810-M819 to define and run G-code macros. * Macros are not saved to EEPROM. */ -//#define GCODE_MACROS +#define GCODE_MACROS #if ENABLED(GCODE_MACROS) #define GCODE_MACROS_SLOTS 5 // Up to 10 may be used #define GCODE_MACROS_SLOT_SIZE 50 // Maximum length of a single macro @@ -3546,7 +3548,7 @@ */ // Custom Menu: Main Menu -//#define CUSTOM_MENU_MAIN +#define CUSTOM_MENU_MAIN #if ENABLED(CUSTOM_MENU_MAIN) //#define CUSTOM_MENU_MAIN_TITLE "Custom Commands" #define CUSTOM_MENU_MAIN_SCRIPT_DONE "M117 User Script Done" @@ -3562,16 +3564,16 @@ #define MAIN_MENU_ITEM_2_GCODE "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND) //#define MAIN_MENU_ITEM_2_CONFIRM - //#define MAIN_MENU_ITEM_3_DESC "Preheat for " PREHEAT_2_LABEL - //#define MAIN_MENU_ITEM_3_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) + #define MAIN_MENU_ITEM_3_DESC "Preheat for " PREHEAT_2_LABEL + #define MAIN_MENU_ITEM_3_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) //#define MAIN_MENU_ITEM_3_CONFIRM - //#define MAIN_MENU_ITEM_4_DESC "Heat Bed/Home/Level" - //#define MAIN_MENU_ITEM_4_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29" + #define MAIN_MENU_ITEM_4_DESC "Heat Bed/Home/Level" + #define MAIN_MENU_ITEM_4_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29" //#define MAIN_MENU_ITEM_4_CONFIRM - //#define MAIN_MENU_ITEM_5_DESC "Home & Info" - //#define MAIN_MENU_ITEM_5_GCODE "G28\nM503" + #define MAIN_MENU_ITEM_5_DESC "Home & Info" + #define MAIN_MENU_ITEM_5_GCODE "G28\nM503" //#define MAIN_MENU_ITEM_5_CONFIRM #endif @@ -3661,10 +3663,7 @@ * * Implement M486 to allow Marlin to skip objects */ -//#define CANCEL_OBJECTS -#if ENABLED(CANCEL_OBJECTS) - #define CANCEL_OBJECTS_REPORTING // Emit the current object as a status message -#endif +#define CANCEL_OBJECTS /** * I2C position encoders for closed loop control. @@ -4002,7 +4001,7 @@ // // M43 - display pin status, toggle pins, watch pins, watch endstops & toggle LED, test servo probe // -//#define PINS_DEBUGGING +#define PINS_DEBUGGING // Enable Marlin dev mode which adds some special commands //#define MARLIN_DEV_MODE diff --git a/config/examples/Creality/CR-10 S4/CrealityV1/Configuration.h b/config/examples/Creality/CR-10 S4/CrealityV1/Configuration.h index 78c2dc9160..b2406c343e 100644 --- a/config/examples/Creality/CR-10 S4/CrealityV1/Configuration.h +++ b/config/examples/Creality/CR-10 S4/CrealityV1/Configuration.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Creality/CR-10 S4/CrealityV1" + /** * Configuration.h * @@ -69,7 +71,7 @@ // @section info // Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes. +#define STRING_CONFIG_H_AUTHOR "(Gamester17, CR-10 S4)" // Who made the changes. //#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) /** @@ -87,7 +89,7 @@ #define SHOW_BOOTSCREEN // Show the bitmap in Marlin/_Bootscreen.h on startup. -//#define SHOW_CUSTOM_BOOTSCREEN +#define SHOW_CUSTOM_BOOTSCREEN // Show the bitmap in Marlin/_Statusscreen.h on the status screen. //#define CUSTOM_STATUS_SCREEN_IMAGE @@ -127,18 +129,18 @@ * * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ -#define BAUDRATE 250000 +#define BAUDRATE 115200 // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH // Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_RAMPS_14_EFB + #define MOTHERBOARD BOARD_RAMPS_CREALITY #endif // Name displayed in the LCD "Ready" message and Info menu -//#define CUSTOM_MACHINE_NAME "3D Printer" +#define CUSTOM_MACHINE_NAME "CR-10 S4" // Printer's unique ID, used by some programs to differentiate between machines. // Choose your own or use a service like https://www.uuidgenerator.net/version4 @@ -424,7 +426,7 @@ #define TEMP_SENSOR_5 0 #define TEMP_SENSOR_6 0 #define TEMP_SENSOR_7 0 -#define TEMP_SENSOR_BED 0 +#define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 #define TEMP_SENSOR_COOLER 0 @@ -472,7 +474,7 @@ // Above this temperature the heater will be switched off. // This can protect components from overheating, but NOT from shorts and failures. // (Use MINTEMP for thermistor short/failure protection.) -#define HEATER_0_MAXTEMP 275 +#define HEATER_0_MAXTEMP 265 #define HEATER_1_MAXTEMP 275 #define HEATER_2_MAXTEMP 275 #define HEATER_3_MAXTEMP 275 @@ -480,7 +482,7 @@ #define HEATER_5_MAXTEMP 275 #define HEATER_6_MAXTEMP 275 #define HEATER_7_MAXTEMP 275 -#define BED_MAXTEMP 150 +#define BED_MAXTEMP 120 #define CHAMBER_MAXTEMP 60 /** @@ -634,7 +636,7 @@ * Note: For Bowden Extruders make this large enough to allow load/unload. */ #define PREVENT_LENGTHY_EXTRUDE -#define EXTRUDE_MAXLENGTH 200 +#define EXTRUDE_MAXLENGTH 1000 //=========================================================================== //======================== Thermal Runaway Protection ======================= @@ -806,7 +808,8 @@ * Override with M92 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 500 } +#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 93 } // Stock Creality +//#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 415 } // Creality with Bondtech extruder /** * Default Max Feed Rate (mm/s) @@ -826,7 +829,7 @@ * Override with M201 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 } +#define DEFAULT_MAX_ACCELERATION { 300, 300, 100, 5000 } //#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 #if ENABLED(LIMITED_MAX_ACCEL_EDITING) @@ -841,9 +844,9 @@ * M204 R Retract Acceleration * M204 T Travel Acceleration */ -#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves +#define DEFAULT_ACCELERATION 500 // X, Y, Z and E acceleration for printing moves +#define DEFAULT_RETRACT_ACCELERATION 500 // E acceleration for retracts +#define DEFAULT_TRAVEL_ACCELERATION 1000 // X, Y, Z acceleration for travel (non printing) moves /** * Default Jerk limits (mm/s) @@ -855,9 +858,9 @@ */ //#define CLASSIC_JERK #if ENABLED(CLASSIC_JERK) - #define DEFAULT_XJERK 10.0 - #define DEFAULT_YJERK 10.0 - #define DEFAULT_ZJERK 0.3 + #define DEFAULT_XJERK 5.0 + #define DEFAULT_YJERK 5.0 + #define DEFAULT_ZJERK 0.4 //#define TRAVEL_EXTRA_XYJERK 0.0 // Additional jerk allowance for all travel moves @@ -877,7 +880,7 @@ * https://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html */ #if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.013 // (mm) Distance from real junction edge + #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge #define JD_HANDLE_SMALL_SEGMENTS // Use curvature estimation instead of just the junction angle // for small segments (< 1mm) with large junction angles (> 135°). #endif @@ -940,7 +943,7 @@ * Use G29 repeatedly, adjusting the Z height at each point with movement commands * or (with LCD_BED_LEVELING) the LCD controller. */ -//#define PROBE_MANUALLY +#define PROBE_MANUALLY /** * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. @@ -1191,13 +1194,14 @@ // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR false -#define INVERT_Y_DIR true -#define INVERT_Z_DIR false +#define INVERT_Y_DIR false +#define INVERT_Z_DIR true // @section extruder // For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR false +#define INVERT_E0_DIR false // Stock Creality CR-10 5S +//#define INVERT_E0_DIR true // Creality with Bondtech extruder #define INVERT_E1_DIR false #define INVERT_E2_DIR false #define INVERT_E3_DIR false @@ -1232,8 +1236,8 @@ // @section machine // The size of the printable area -#define X_BED_SIZE 200 -#define Y_BED_SIZE 200 +#define X_BED_SIZE 400 +#define Y_BED_SIZE 400 // Travel limits (mm) after homing, corresponding to endstop positions. #define X_MIN_POS 0 @@ -1241,7 +1245,7 @@ #define Z_MIN_POS 0 #define X_MAX_POS X_BED_SIZE #define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 200 +#define Z_MAX_POS 400 /** * Software Endstops @@ -1285,12 +1289,13 @@ * RAMPS-based boards use SERVO3_PIN for the first runout sensor. * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. */ -//#define FILAMENT_RUNOUT_SENSOR +#define FILAMENT_RUNOUT_SENSOR #if ENABLED(FILAMENT_RUNOUT_SENSOR) #define FIL_RUNOUT_ENABLED_DEFAULT true // Enable the sensor on startup. Override with M412 followed by M500. #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. + #define FIL_RUNOUT_PIN 2 // Creality CR10-S stock sensor - #define FIL_RUNOUT_STATE LOW // Pin state indicating that filament is NOT present. + #define FIL_RUNOUT_STATE HIGH // Pin state indicating that filament is NOT present. #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. //#define WATCH_ALL_RUNOUT_SENSORS // Execute runout script on any triggering sensor, not only for the active extruder. @@ -1387,7 +1392,7 @@ */ //#define AUTO_BED_LEVELING_3POINT //#define AUTO_BED_LEVELING_LINEAR -//#define AUTO_BED_LEVELING_BILINEAR +#define AUTO_BED_LEVELING_BILINEAR //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING @@ -1438,7 +1443,7 @@ /** * Enable the G26 Mesh Validation Pattern tool. */ - //#define G26_MESH_VALIDATION + #define G26_MESH_VALIDATION #if ENABLED(G26_MESH_VALIDATION) #define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle. #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for G26. @@ -1518,7 +1523,7 @@ * Add a bed leveling sub-menu for ABL or MBL. * Include a guided procedure if manual probing is enabled. */ -//#define LCD_BED_LEVELING +#define LCD_BED_LEVELING #if ENABLED(LCD_BED_LEVELING) #define MESH_EDIT_Z_STEP 0.025 // (mm) Step size while manually probing Z axis. @@ -1527,7 +1532,7 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS +#define LEVEL_BED_CORNERS #if ENABLED(LEVEL_BED_CORNERS) #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets @@ -1574,8 +1579,8 @@ // Manually set the home position. Leave these undefined for automatic settings. // For DELTA this is the top-center of the Cartesian print volume. -//#define MANUAL_X_HOME_POS 0 -//#define MANUAL_Y_HOME_POS 0 +#define MANUAL_X_HOME_POS 4 +#define MANUAL_Y_HOME_POS 2 //#define MANUAL_Z_HOME_POS 0 // Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area. @@ -1595,7 +1600,7 @@ #endif // Homing speeds (mm/min) -#define HOMING_FEEDRATE_MM_M { (50*60), (50*60), (4*60) } +#define HOMING_FEEDRATE_MM_M { (20*60), (20*60), (4*60) } // Validate that endstops are triggered on homing moves #define VALIDATE_HOMING_ENDSTOPS @@ -1672,7 +1677,7 @@ * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) */ -//#define EEPROM_SETTINGS // Persistent storage with M500 and M501 +#define EEPROM_SETTINGS // Persistent storage with M500 and M501 //#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. #define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load @@ -1706,17 +1711,29 @@ // Preheat Constants - Up to 5 are supported without changes // #define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 180 -#define PREHEAT_1_TEMP_BED 70 +#define PREHEAT_1_TEMP_HOTEND 205 +#define PREHEAT_1_TEMP_BED 60 #define PREHEAT_1_TEMP_CHAMBER 35 #define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 #define PREHEAT_2_LABEL "ABS" -#define PREHEAT_2_TEMP_HOTEND 240 -#define PREHEAT_2_TEMP_BED 110 +#define PREHEAT_2_TEMP_HOTEND 250 +#define PREHEAT_2_TEMP_BED 80 #define PREHEAT_2_TEMP_CHAMBER 35 #define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 +#define PREHEAT_3_LABEL "PETG" +#define PREHEAT_3_TEMP_HOTEND 220 +#define PREHEAT_3_TEMP_BED 45 +#define PREHEAT_3_TEMP_CHAMBER 35 +#define PREHEAT_3_FAN_SPEED 255 // Value from 0 to 255 + +#define PREHEAT_4_LABEL "Nylon" +#define PREHEAT_4_TEMP_HOTEND 230 +#define PREHEAT_4_TEMP_BED 45 +#define PREHEAT_4_TEMP_CHAMBER 35 +#define PREHEAT_4_FAN_SPEED 255 // Value from 0 to 255 + /** * Nozzle Park * @@ -1728,11 +1745,11 @@ * P1 Raise the nozzle always to Z-park height. * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. */ -//#define NOZZLE_PARK_FEATURE +#define NOZZLE_PARK_FEATURE #if ENABLED(NOZZLE_PARK_FEATURE) // Specify a park position as { X, Y, Z_raise } - #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 } + #define NOZZLE_PARK_POINT { (X_MIN_POS + 20), (Y_MAX_POS - 20), 20 } //#define NOZZLE_PARK_X_ONLY // X move only is required to park //#define NOZZLE_PARK_Y_ONLY // Y move only is required to park #define NOZZLE_PARK_Z_RAISE_MIN 2 // (mm) Always raise Z by at least this distance @@ -1936,7 +1953,7 @@ * SD Card support is disabled by default. If your controller has an SD slot, * you must uncomment the following option or it won't work. */ -//#define SDSUPPORT +#define SDSUPPORT /** * SD CARD: ENABLE CRC @@ -2014,7 +2031,7 @@ // If you have a speaker that can produce tones, enable it here. // By default Marlin assumes you have a buzzer with a fixed frequency. // -//#define SPEAKER +#define SPEAKER // // The duration and frequency for the UI feedback sound. @@ -2195,7 +2212,7 @@ // RepRapDiscount FULL GRAPHIC Smart Controller // https://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller // -//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER +#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER // // K.3D Full Graphic Smart Controller diff --git a/config/examples/Creality/CR-10 S4/CrealityV1/Configuration_adv.h b/config/examples/Creality/CR-10 S4/CrealityV1/Configuration_adv.h index 5335fa012a..1f2efc767c 100644 --- a/config/examples/Creality/CR-10 S4/CrealityV1/Configuration_adv.h +++ b/config/examples/Creality/CR-10 S4/CrealityV1/Configuration_adv.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Creality/CR-10 S4/CrealityV1" + /** * Configuration_adv.h * @@ -258,7 +260,7 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 20 // Seconds + #define WATCH_TEMP_PERIOD 40 // Seconds #define WATCH_TEMP_INCREASE 2 // Degrees Celsius #endif @@ -266,13 +268,13 @@ * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 40 // Seconds + #define THERMAL_PROTECTION_BED_HYSTERESIS 4 // Degrees Celsius /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds + #define WATCH_BED_TEMP_PERIOD 600 // Seconds #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius #endif @@ -713,7 +715,7 @@ // Remember: you should set the second extruder x-offset to 0 in your slicer. // This is the default power-up mode which can be later using M605. - #define DEFAULT_DUAL_X_CARRIAGE_MODE DXC_AUTO_PARK_MODE + #define DEFAULT_DUAL_X_CARRIAGE_MODE DXC_FULL_CONTROL_MODE // Default x offset in duplication mode (typically set to half print bed width) #define DEFAULT_DUPLICATION_X_OFFSET 100 @@ -741,7 +743,7 @@ //#define HOMING_BACKOFF_POST_MM { 2, 2, 2 } // (mm) Backoff from endstops after homing -//#define QUICK_HOME // If G28 contains XY do a diagonal move first +#define QUICK_HOME // If G28 contains XY do a diagonal move first //#define HOME_Y_BEFORE_X // If G28 contains XY home Y before X //#define HOME_Z_FIRST // Home Z first. Requires a Z-MIN endstop (not a probe). //#define CODEPENDENT_XY_HOMING // If X/Y can't home without homing Y/X first @@ -792,7 +794,7 @@ * differs, a mode set eeprom write will be completed at initialization. * Use the option below to force an eeprom write to a V3.1 probe regardless. */ - //#define BLTOUCH_SET_5V_MODE + #define BLTOUCH_SET_5V_MODE /** * Safety: Activate if connecting a probe with an unknown voltage mode. @@ -867,7 +869,7 @@ // On a 300mm bed a 5% grade would give a misalignment of ~1.5cm #define G34_MAX_GRADE 5 // (%) Maximum incline that G34 will handle - #define Z_STEPPER_ALIGN_ITERATIONS 5 // Number of iterations to apply during alignment + #define Z_STEPPER_ALIGN_ITERATIONS 3 // Number of iterations to apply during alignment #define Z_STEPPER_ALIGN_ACC 0.02 // Stop iterating early if the accuracy is better than this #define RESTORE_LEVELING_AFTER_G34 // Restore leveling after G34 is done? // After G34, re-home Z (G28 Z) or just calculate it from the last probe heights? @@ -1175,7 +1177,7 @@ #endif // Include a page of printer information in the LCD Main Menu - //#define LCD_INFO_MENU + #define LCD_INFO_MENU #if ENABLED(LCD_INFO_MENU) //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages #endif @@ -1229,7 +1231,7 @@ #endif // Scroll a longer status message into view - //#define STATUS_MESSAGE_SCROLLING + #define STATUS_MESSAGE_SCROLLING // On the Info Screen, display XY with one decimal place when possible //#define LCD_DECIMAL_SMALL_XY @@ -1301,7 +1303,7 @@ //#define BROWSE_MEDIA_ON_INSERT // Open the file browser when media is inserted - #define EVENT_GCODE_SD_ABORT "G28XY" // G-code to run on SD Abort Print (e.g., "G28XY" or "G27") + #define EVENT_GCODE_SD_ABORT "G27" // G-code to run on SD Abort Print (e.g., "G28XY" or "G27") #if ENABLED(PRINTER_EVENT_LEDS) #define PE_LEDS_COMPLETED_TIME (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination @@ -1361,15 +1363,15 @@ * - SDSORT_CACHE_NAMES will retain the sorted file listing in RAM. (Expensive!) * - SDSORT_DYNAMIC_RAM only uses RAM when the SD menu is visible. (Use with caution!) */ - //#define SDCARD_SORT_ALPHA + #define SDCARD_SORT_ALPHA // SD Card Sorting options #if ENABLED(SDCARD_SORT_ALPHA) #define SDSORT_LIMIT 40 // Maximum number of sorted items (10-256). Costs 27 bytes each. #define FOLDER_SORTING -1 // -1=above 0=none 1=below #define SDSORT_GCODE false // Allow turning sorting on/off with LCD and M34 G-code. - #define SDSORT_USES_RAM false // Pre-allocate a static array for faster pre-sorting. - #define SDSORT_USES_STACK false // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.) + #define SDSORT_USES_RAM true // Pre-allocate a static array for faster pre-sorting. + #define SDSORT_USES_STACK true // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.) #define SDSORT_CACHE_NAMES false // Keep sorted items in RAM longer for speedy performance. Most expensive option. #define SDSORT_DYNAMIC_RAM false // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use! #define SDSORT_CACHE_VFATS 2 // Maximum number of 13-byte VFAT entries to use for sorting. @@ -1384,7 +1386,7 @@ //#define LONG_FILENAME_HOST_SUPPORT // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES + #define SCROLL_LONG_FILENAMES // Leave the heaters on after Stop Print (not recommended!) //#define SD_ABORT_NO_COOLDOWN @@ -1512,7 +1514,7 @@ */ #if HAS_MARLINUI_U8GLIB // Show SD percentage next to the progress bar - //#define DOGM_SD_PERCENT + #define DOGM_SD_PERCENT // Save many cycles by drawing a hollow frame or no frame on the Info Screen //#define XYZ_NO_FRAME @@ -1790,7 +1792,7 @@ * * Warning: Does not respect endstops! */ -//#define BABYSTEPPING +#define BABYSTEPPING #if ENABLED(BABYSTEPPING) //#define INTEGRATED_BABYSTEPPING // EXPERIMENTAL integration of babystepping into the Stepper ISR //#define BABYSTEP_WITHOUT_HOMING @@ -1798,10 +1800,10 @@ //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way //#define BABYSTEP_MILLIMETER_UNITS // Specify BABYSTEP_MULTIPLICATOR_(XY|Z) in mm instead of micro-steps - #define BABYSTEP_MULTIPLICATOR_Z 1 // (steps or mm) Steps or millimeter distance for each Z babystep - #define BABYSTEP_MULTIPLICATOR_XY 1 // (steps or mm) Steps or millimeter distance for each XY babystep + #define BABYSTEP_MULTIPLICATOR_Z 10 // (steps or mm) Steps or millimeter distance for each Z babystep + #define BABYSTEP_MULTIPLICATOR_XY 10 // (steps or mm) Steps or millimeter distance for each Z babystep - //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. + #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. // Note: Extra time may be added to mitigate controller latency. @@ -2141,7 +2143,7 @@ * Currently handles M108, M112, M410, M876 * NOTE: Not yet implemented for all platforms. */ -//#define EMERGENCY_PARSER +#define EMERGENCY_PARSER /** * Realtime Reporting (requires EMERGENCY_PARSER) @@ -2170,7 +2172,7 @@ //#define NO_TIMEOUTS 1000 // Milliseconds // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. -//#define ADVANCED_OK +#define ADVANCED_OK // Printrun may have trouble receiving long strings all at once. // This option inserts short delays between lines of serial output. @@ -2311,28 +2313,28 @@ * * Enable PARK_HEAD_ON_PAUSE to add the G-code M125 Pause and Park. */ -//#define ADVANCED_PAUSE_FEATURE +#define ADVANCED_PAUSE_FEATURE #if ENABLED(ADVANCED_PAUSE_FEATURE) #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. - #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. + #define PAUSE_PARK_RETRACT_LENGTH 10 // (mm) Initial retract. // This short retract is done immediately, before parking the nozzle. - #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast. + #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 41 // (mm/s) Unload filament feedrate. This can be pretty fast. #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload. + #define FILAMENT_CHANGE_UNLOAD_LENGTH 750 // (mm) The length of filament for a complete unload. // For Bowden, the full length of the tube and nozzle. // For direct drive, the full length of the nozzle. // Set to 0 for manual unloading. #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE 6 // (mm/s) Slow move when starting load. #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 0 // (mm) Slow length, to allow time to insert material. // 0 to disable start loading and skip to fast load only - #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast. + #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 41 // (mm/s) Load filament feedrate. This can be pretty fast. #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle. + #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 600 // (mm) Load length of filament, from extruder gear to nozzle. // For Bowden, the full length of the tube and nozzle. // For direct drive, the full length of the nozzle. - //#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted. + #define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted. #define ADVANCED_PAUSE_PURGE_FEEDRATE 3 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate. - #define ADVANCED_PAUSE_PURGE_LENGTH 50 // (mm) Length to extrude after loading. + #define ADVANCED_PAUSE_PURGE_LENGTH 150 // (mm) Length to extrude after loading. // Set to 0 for manual extrusion. // Filament can be extruded repeatedly from the Filament Change menu // until extrusion is consistent, and to purge old filament. @@ -2340,17 +2342,17 @@ //#define ADVANCED_PAUSE_FANS_PAUSE // Turn off print-cooling fans while the machine is paused. // Filament Unload does a Retract, Delay, and Purge first: - #define FILAMENT_UNLOAD_PURGE_RETRACT 13 // (mm) Unload initial retract length. + #define FILAMENT_UNLOAD_PURGE_RETRACT 10 // (mm) Unload initial retract length. #define FILAMENT_UNLOAD_PURGE_DELAY 5000 // (ms) Delay for the filament to cool after retract. - #define FILAMENT_UNLOAD_PURGE_LENGTH 8 // (mm) An unretract is done, then this length is purged. + #define FILAMENT_UNLOAD_PURGE_LENGTH 0 // (mm) An unretract is done, then this length is purged. #define FILAMENT_UNLOAD_PURGE_FEEDRATE 25 // (mm/s) feedrate to purge before unload #define PAUSE_PARK_NOZZLE_TIMEOUT 45 // (seconds) Time limit before the nozzle is turned off for safety. - #define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed. + #define FILAMENT_CHANGE_ALERT_BEEPS 6 // Number of alert beeps to play when a response is needed. #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change. - //#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. - //#define HOME_BEFORE_FILAMENT_CHANGE // If needed, home before parking for filament change + #define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. + #define HOME_BEFORE_FILAMENT_CHANGE // If needed, home before parking for filament change //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) @@ -3474,7 +3476,7 @@ //#define NO_WORKSPACE_OFFSETS // Extra options for the M114 "Current Position" report -//#define M114_DETAIL // Use 'M114` for details to check planner calculations +#define M114_DETAIL // Use 'M114` for details to check planner calculations //#define M114_REALTIME // Real current position based on forward kinematics //#define M114_LEGACY // M114 used to synchronize on every call. Enable if needed. diff --git a/config/examples/Creality/CR-10 S5/CrealityV1/Configuration.h b/config/examples/Creality/CR-10 S5/CrealityV1/Configuration.h index 78c2dc9160..937788adb9 100644 --- a/config/examples/Creality/CR-10 S5/CrealityV1/Configuration.h +++ b/config/examples/Creality/CR-10 S5/CrealityV1/Configuration.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Creality/CR-10 S5/CrealityV1" + /** * Configuration.h * @@ -69,7 +71,7 @@ // @section info // Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes. +#define STRING_CONFIG_H_AUTHOR "(Evgeny-SPB, CR-10 S5)" // Who made the changes. //#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) /** @@ -87,7 +89,7 @@ #define SHOW_BOOTSCREEN // Show the bitmap in Marlin/_Bootscreen.h on startup. -//#define SHOW_CUSTOM_BOOTSCREEN +#define SHOW_CUSTOM_BOOTSCREEN // Show the bitmap in Marlin/_Statusscreen.h on the status screen. //#define CUSTOM_STATUS_SCREEN_IMAGE @@ -127,18 +129,18 @@ * * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ -#define BAUDRATE 250000 +#define BAUDRATE 115200 // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH // Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_RAMPS_14_EFB + #define MOTHERBOARD BOARD_RAMPS_CREALITY #endif // Name displayed in the LCD "Ready" message and Info menu -//#define CUSTOM_MACHINE_NAME "3D Printer" +#define CUSTOM_MACHINE_NAME "CR-10 S5" // Printer's unique ID, used by some programs to differentiate between machines. // Choose your own or use a service like https://www.uuidgenerator.net/version4 @@ -424,7 +426,7 @@ #define TEMP_SENSOR_5 0 #define TEMP_SENSOR_6 0 #define TEMP_SENSOR_7 0 -#define TEMP_SENSOR_BED 0 +#define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 #define TEMP_SENSOR_COOLER 0 @@ -472,7 +474,7 @@ // Above this temperature the heater will be switched off. // This can protect components from overheating, but NOT from shorts and failures. // (Use MINTEMP for thermistor short/failure protection.) -#define HEATER_0_MAXTEMP 275 +#define HEATER_0_MAXTEMP 265 #define HEATER_1_MAXTEMP 275 #define HEATER_2_MAXTEMP 275 #define HEATER_3_MAXTEMP 275 @@ -480,7 +482,7 @@ #define HEATER_5_MAXTEMP 275 #define HEATER_6_MAXTEMP 275 #define HEATER_7_MAXTEMP 275 -#define BED_MAXTEMP 150 +#define BED_MAXTEMP 120 #define CHAMBER_MAXTEMP 60 /** @@ -634,7 +636,7 @@ * Note: For Bowden Extruders make this large enough to allow load/unload. */ #define PREVENT_LENGTHY_EXTRUDE -#define EXTRUDE_MAXLENGTH 200 +#define EXTRUDE_MAXLENGTH 1000 //=========================================================================== //======================== Thermal Runaway Protection ======================= @@ -806,7 +808,8 @@ * Override with M92 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 500 } +#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 93 } // Stock Creality +//#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 415 } // Creality with Bondtech extruder /** * Default Max Feed Rate (mm/s) @@ -826,7 +829,7 @@ * Override with M201 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 } +#define DEFAULT_MAX_ACCELERATION { 300, 300, 100, 5000 } //#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 #if ENABLED(LIMITED_MAX_ACCEL_EDITING) @@ -841,9 +844,9 @@ * M204 R Retract Acceleration * M204 T Travel Acceleration */ -#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves +#define DEFAULT_ACCELERATION 500 // X, Y, Z and E acceleration for printing moves +#define DEFAULT_RETRACT_ACCELERATION 500 // E acceleration for retracts +#define DEFAULT_TRAVEL_ACCELERATION 1000 // X, Y, Z acceleration for travel (non printing) moves /** * Default Jerk limits (mm/s) @@ -855,9 +858,9 @@ */ //#define CLASSIC_JERK #if ENABLED(CLASSIC_JERK) - #define DEFAULT_XJERK 10.0 - #define DEFAULT_YJERK 10.0 - #define DEFAULT_ZJERK 0.3 + #define DEFAULT_XJERK 5.0 + #define DEFAULT_YJERK 5.0 + #define DEFAULT_ZJERK 0.4 //#define TRAVEL_EXTRA_XYJERK 0.0 // Additional jerk allowance for all travel moves @@ -877,7 +880,7 @@ * https://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html */ #if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.013 // (mm) Distance from real junction edge + #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge #define JD_HANDLE_SMALL_SEGMENTS // Use curvature estimation instead of just the junction angle // for small segments (< 1mm) with large junction angles (> 135°). #endif @@ -940,7 +943,7 @@ * Use G29 repeatedly, adjusting the Z height at each point with movement commands * or (with LCD_BED_LEVELING) the LCD controller. */ -//#define PROBE_MANUALLY +#define PROBE_MANUALLY /** * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. @@ -1191,13 +1194,14 @@ // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR false -#define INVERT_Y_DIR true -#define INVERT_Z_DIR false +#define INVERT_Y_DIR false +#define INVERT_Z_DIR true // @section extruder // For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR false +#define INVERT_E0_DIR false // Stock Creality CR-10 5S +//#define INVERT_E0_DIR true // Creality with Bondtech extruder #define INVERT_E1_DIR false #define INVERT_E2_DIR false #define INVERT_E3_DIR false @@ -1232,8 +1236,8 @@ // @section machine // The size of the printable area -#define X_BED_SIZE 200 -#define Y_BED_SIZE 200 +#define X_BED_SIZE 510 // Nozzle is at X4 when homed +#define Y_BED_SIZE 510 // Nozzle is at Y2 when homed // Travel limits (mm) after homing, corresponding to endstop positions. #define X_MIN_POS 0 @@ -1241,7 +1245,7 @@ #define Z_MIN_POS 0 #define X_MAX_POS X_BED_SIZE #define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 200 +#define Z_MAX_POS 510 /** * Software Endstops @@ -1285,12 +1289,13 @@ * RAMPS-based boards use SERVO3_PIN for the first runout sensor. * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. */ -//#define FILAMENT_RUNOUT_SENSOR +#define FILAMENT_RUNOUT_SENSOR #if ENABLED(FILAMENT_RUNOUT_SENSOR) #define FIL_RUNOUT_ENABLED_DEFAULT true // Enable the sensor on startup. Override with M412 followed by M500. #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. + #define FIL_RUNOUT_PIN 2 // Creality CR10-S stock sensor - #define FIL_RUNOUT_STATE LOW // Pin state indicating that filament is NOT present. + #define FIL_RUNOUT_STATE HIGH // Pin state indicating that filament is NOT present. #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. //#define WATCH_ALL_RUNOUT_SENSORS // Execute runout script on any triggering sensor, not only for the active extruder. @@ -1387,7 +1392,7 @@ */ //#define AUTO_BED_LEVELING_3POINT //#define AUTO_BED_LEVELING_LINEAR -//#define AUTO_BED_LEVELING_BILINEAR +#define AUTO_BED_LEVELING_BILINEAR //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING @@ -1438,7 +1443,7 @@ /** * Enable the G26 Mesh Validation Pattern tool. */ - //#define G26_MESH_VALIDATION + #define G26_MESH_VALIDATION #if ENABLED(G26_MESH_VALIDATION) #define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle. #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for G26. @@ -1518,7 +1523,7 @@ * Add a bed leveling sub-menu for ABL or MBL. * Include a guided procedure if manual probing is enabled. */ -//#define LCD_BED_LEVELING +#define LCD_BED_LEVELING #if ENABLED(LCD_BED_LEVELING) #define MESH_EDIT_Z_STEP 0.025 // (mm) Step size while manually probing Z axis. @@ -1527,7 +1532,7 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS +#define LEVEL_BED_CORNERS #if ENABLED(LEVEL_BED_CORNERS) #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets @@ -1574,8 +1579,8 @@ // Manually set the home position. Leave these undefined for automatic settings. // For DELTA this is the top-center of the Cartesian print volume. -//#define MANUAL_X_HOME_POS 0 -//#define MANUAL_Y_HOME_POS 0 +#define MANUAL_X_HOME_POS 4 +#define MANUAL_Y_HOME_POS 2 //#define MANUAL_Z_HOME_POS 0 // Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area. @@ -1595,7 +1600,7 @@ #endif // Homing speeds (mm/min) -#define HOMING_FEEDRATE_MM_M { (50*60), (50*60), (4*60) } +#define HOMING_FEEDRATE_MM_M { (20*60), (20*60), (4*60) } // Validate that endstops are triggered on homing moves #define VALIDATE_HOMING_ENDSTOPS @@ -1672,7 +1677,7 @@ * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) */ -//#define EEPROM_SETTINGS // Persistent storage with M500 and M501 +#define EEPROM_SETTINGS // Persistent storage with M500 and M501 //#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. #define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load @@ -1706,14 +1711,14 @@ // Preheat Constants - Up to 5 are supported without changes // #define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 180 -#define PREHEAT_1_TEMP_BED 70 +#define PREHEAT_1_TEMP_HOTEND 205 +#define PREHEAT_1_TEMP_BED 60 #define PREHEAT_1_TEMP_CHAMBER 35 #define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 #define PREHEAT_2_LABEL "ABS" -#define PREHEAT_2_TEMP_HOTEND 240 -#define PREHEAT_2_TEMP_BED 110 +#define PREHEAT_2_TEMP_HOTEND 250 +#define PREHEAT_2_TEMP_BED 80 #define PREHEAT_2_TEMP_CHAMBER 35 #define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 @@ -1728,11 +1733,11 @@ * P1 Raise the nozzle always to Z-park height. * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. */ -//#define NOZZLE_PARK_FEATURE +#define NOZZLE_PARK_FEATURE #if ENABLED(NOZZLE_PARK_FEATURE) // Specify a park position as { X, Y, Z_raise } - #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 } + #define NOZZLE_PARK_POINT { (X_MIN_POS + 20), (Y_MAX_POS - 20), 20 } //#define NOZZLE_PARK_X_ONLY // X move only is required to park //#define NOZZLE_PARK_Y_ONLY // Y move only is required to park #define NOZZLE_PARK_Z_RAISE_MIN 2 // (mm) Always raise Z by at least this distance @@ -1936,7 +1941,7 @@ * SD Card support is disabled by default. If your controller has an SD slot, * you must uncomment the following option or it won't work. */ -//#define SDSUPPORT +#define SDSUPPORT /** * SD CARD: ENABLE CRC @@ -2014,7 +2019,7 @@ // If you have a speaker that can produce tones, enable it here. // By default Marlin assumes you have a buzzer with a fixed frequency. // -//#define SPEAKER +#define SPEAKER // // The duration and frequency for the UI feedback sound. @@ -2195,7 +2200,7 @@ // RepRapDiscount FULL GRAPHIC Smart Controller // https://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller // -//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER +#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER // // K.3D Full Graphic Smart Controller diff --git a/config/examples/Creality/CR-10 S5/CrealityV1/Configuration_adv.h b/config/examples/Creality/CR-10 S5/CrealityV1/Configuration_adv.h index 5335fa012a..816d1d21af 100644 --- a/config/examples/Creality/CR-10 S5/CrealityV1/Configuration_adv.h +++ b/config/examples/Creality/CR-10 S5/CrealityV1/Configuration_adv.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Creality/CR-10 S5/CrealityV1" + /** * Configuration_adv.h * @@ -258,7 +260,7 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 20 // Seconds + #define WATCH_TEMP_PERIOD 40 // Seconds #define WATCH_TEMP_INCREASE 2 // Degrees Celsius #endif @@ -266,13 +268,13 @@ * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 40 // Seconds + #define THERMAL_PROTECTION_BED_HYSTERESIS 4 // Degrees Celsius /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds + #define WATCH_BED_TEMP_PERIOD 600 // Seconds #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius #endif @@ -713,7 +715,7 @@ // Remember: you should set the second extruder x-offset to 0 in your slicer. // This is the default power-up mode which can be later using M605. - #define DEFAULT_DUAL_X_CARRIAGE_MODE DXC_AUTO_PARK_MODE + #define DEFAULT_DUAL_X_CARRIAGE_MODE DXC_FULL_CONTROL_MODE // Default x offset in duplication mode (typically set to half print bed width) #define DEFAULT_DUPLICATION_X_OFFSET 100 @@ -741,7 +743,7 @@ //#define HOMING_BACKOFF_POST_MM { 2, 2, 2 } // (mm) Backoff from endstops after homing -//#define QUICK_HOME // If G28 contains XY do a diagonal move first +#define QUICK_HOME // If G28 contains XY do a diagonal move first //#define HOME_Y_BEFORE_X // If G28 contains XY home Y before X //#define HOME_Z_FIRST // Home Z first. Requires a Z-MIN endstop (not a probe). //#define CODEPENDENT_XY_HOMING // If X/Y can't home without homing Y/X first @@ -792,7 +794,7 @@ * differs, a mode set eeprom write will be completed at initialization. * Use the option below to force an eeprom write to a V3.1 probe regardless. */ - //#define BLTOUCH_SET_5V_MODE + #define BLTOUCH_SET_5V_MODE /** * Safety: Activate if connecting a probe with an unknown voltage mode. @@ -867,7 +869,7 @@ // On a 300mm bed a 5% grade would give a misalignment of ~1.5cm #define G34_MAX_GRADE 5 // (%) Maximum incline that G34 will handle - #define Z_STEPPER_ALIGN_ITERATIONS 5 // Number of iterations to apply during alignment + #define Z_STEPPER_ALIGN_ITERATIONS 3 // Number of iterations to apply during alignment #define Z_STEPPER_ALIGN_ACC 0.02 // Stop iterating early if the accuracy is better than this #define RESTORE_LEVELING_AFTER_G34 // Restore leveling after G34 is done? // After G34, re-home Z (G28 Z) or just calculate it from the last probe heights? @@ -1175,7 +1177,7 @@ #endif // Include a page of printer information in the LCD Main Menu - //#define LCD_INFO_MENU + #define LCD_INFO_MENU #if ENABLED(LCD_INFO_MENU) //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages #endif @@ -1229,7 +1231,7 @@ #endif // Scroll a longer status message into view - //#define STATUS_MESSAGE_SCROLLING + #define STATUS_MESSAGE_SCROLLING // On the Info Screen, display XY with one decimal place when possible //#define LCD_DECIMAL_SMALL_XY @@ -1301,7 +1303,7 @@ //#define BROWSE_MEDIA_ON_INSERT // Open the file browser when media is inserted - #define EVENT_GCODE_SD_ABORT "G28XY" // G-code to run on SD Abort Print (e.g., "G28XY" or "G27") + #define EVENT_GCODE_SD_ABORT "G27" // G-code to run on SD Abort Print (e.g., "G28XY" or "G27") #if ENABLED(PRINTER_EVENT_LEDS) #define PE_LEDS_COMPLETED_TIME (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination @@ -1361,15 +1363,15 @@ * - SDSORT_CACHE_NAMES will retain the sorted file listing in RAM. (Expensive!) * - SDSORT_DYNAMIC_RAM only uses RAM when the SD menu is visible. (Use with caution!) */ - //#define SDCARD_SORT_ALPHA + #define SDCARD_SORT_ALPHA // SD Card Sorting options #if ENABLED(SDCARD_SORT_ALPHA) #define SDSORT_LIMIT 40 // Maximum number of sorted items (10-256). Costs 27 bytes each. #define FOLDER_SORTING -1 // -1=above 0=none 1=below #define SDSORT_GCODE false // Allow turning sorting on/off with LCD and M34 G-code. - #define SDSORT_USES_RAM false // Pre-allocate a static array for faster pre-sorting. - #define SDSORT_USES_STACK false // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.) + #define SDSORT_USES_RAM true // Pre-allocate a static array for faster pre-sorting. + #define SDSORT_USES_STACK true // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.) #define SDSORT_CACHE_NAMES false // Keep sorted items in RAM longer for speedy performance. Most expensive option. #define SDSORT_DYNAMIC_RAM false // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use! #define SDSORT_CACHE_VFATS 2 // Maximum number of 13-byte VFAT entries to use for sorting. @@ -1384,7 +1386,7 @@ //#define LONG_FILENAME_HOST_SUPPORT // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES + #define SCROLL_LONG_FILENAMES // Leave the heaters on after Stop Print (not recommended!) //#define SD_ABORT_NO_COOLDOWN @@ -1512,7 +1514,7 @@ */ #if HAS_MARLINUI_U8GLIB // Show SD percentage next to the progress bar - //#define DOGM_SD_PERCENT + #define DOGM_SD_PERCENT // Save many cycles by drawing a hollow frame or no frame on the Info Screen //#define XYZ_NO_FRAME @@ -1790,7 +1792,7 @@ * * Warning: Does not respect endstops! */ -//#define BABYSTEPPING +#define BABYSTEPPING #if ENABLED(BABYSTEPPING) //#define INTEGRATED_BABYSTEPPING // EXPERIMENTAL integration of babystepping into the Stepper ISR //#define BABYSTEP_WITHOUT_HOMING @@ -1798,10 +1800,10 @@ //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way //#define BABYSTEP_MILLIMETER_UNITS // Specify BABYSTEP_MULTIPLICATOR_(XY|Z) in mm instead of micro-steps - #define BABYSTEP_MULTIPLICATOR_Z 1 // (steps or mm) Steps or millimeter distance for each Z babystep - #define BABYSTEP_MULTIPLICATOR_XY 1 // (steps or mm) Steps or millimeter distance for each XY babystep + #define BABYSTEP_MULTIPLICATOR_Z 10 // (steps or mm) Steps or millimeter distance for each Z babystep + #define BABYSTEP_MULTIPLICATOR_XY 10 // (steps or mm) Steps or millimeter distance for each Z babystep - //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. + #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. // Note: Extra time may be added to mitigate controller latency. @@ -2141,7 +2143,7 @@ * Currently handles M108, M112, M410, M876 * NOTE: Not yet implemented for all platforms. */ -//#define EMERGENCY_PARSER +#define EMERGENCY_PARSER /** * Realtime Reporting (requires EMERGENCY_PARSER) @@ -2170,7 +2172,7 @@ //#define NO_TIMEOUTS 1000 // Milliseconds // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. -//#define ADVANCED_OK +#define ADVANCED_OK // Printrun may have trouble receiving long strings all at once. // This option inserts short delays between lines of serial output. @@ -2311,28 +2313,28 @@ * * Enable PARK_HEAD_ON_PAUSE to add the G-code M125 Pause and Park. */ -//#define ADVANCED_PAUSE_FEATURE +#define ADVANCED_PAUSE_FEATURE #if ENABLED(ADVANCED_PAUSE_FEATURE) #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. - #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. + #define PAUSE_PARK_RETRACT_LENGTH 10 // (mm) Initial retract. // This short retract is done immediately, before parking the nozzle. - #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast. + #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 41 // (mm/s) Unload filament feedrate. This can be pretty fast. #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload. + #define FILAMENT_CHANGE_UNLOAD_LENGTH 750 // (mm) The length of filament for a complete unload. // For Bowden, the full length of the tube and nozzle. // For direct drive, the full length of the nozzle. // Set to 0 for manual unloading. #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE 6 // (mm/s) Slow move when starting load. #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 0 // (mm) Slow length, to allow time to insert material. // 0 to disable start loading and skip to fast load only - #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast. + #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 41 // (mm/s) Load filament feedrate. This can be pretty fast. #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle. + #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 600 // (mm) Load length of filament, from extruder gear to nozzle. // For Bowden, the full length of the tube and nozzle. // For direct drive, the full length of the nozzle. - //#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted. + #define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted. #define ADVANCED_PAUSE_PURGE_FEEDRATE 3 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate. - #define ADVANCED_PAUSE_PURGE_LENGTH 50 // (mm) Length to extrude after loading. + #define ADVANCED_PAUSE_PURGE_LENGTH 150 // (mm) Length to extrude after loading. // Set to 0 for manual extrusion. // Filament can be extruded repeatedly from the Filament Change menu // until extrusion is consistent, and to purge old filament. @@ -2340,17 +2342,17 @@ //#define ADVANCED_PAUSE_FANS_PAUSE // Turn off print-cooling fans while the machine is paused. // Filament Unload does a Retract, Delay, and Purge first: - #define FILAMENT_UNLOAD_PURGE_RETRACT 13 // (mm) Unload initial retract length. + #define FILAMENT_UNLOAD_PURGE_RETRACT 10 // (mm) Unload initial retract length. #define FILAMENT_UNLOAD_PURGE_DELAY 5000 // (ms) Delay for the filament to cool after retract. - #define FILAMENT_UNLOAD_PURGE_LENGTH 8 // (mm) An unretract is done, then this length is purged. + #define FILAMENT_UNLOAD_PURGE_LENGTH 0 // (mm) An unretract is done, then this length is purged. #define FILAMENT_UNLOAD_PURGE_FEEDRATE 25 // (mm/s) feedrate to purge before unload #define PAUSE_PARK_NOZZLE_TIMEOUT 45 // (seconds) Time limit before the nozzle is turned off for safety. - #define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed. + #define FILAMENT_CHANGE_ALERT_BEEPS 6 // Number of alert beeps to play when a response is needed. #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change. - //#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. - //#define HOME_BEFORE_FILAMENT_CHANGE // If needed, home before parking for filament change + #define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. + #define HOME_BEFORE_FILAMENT_CHANGE // If needed, home before parking for filament change //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) @@ -3474,7 +3476,7 @@ //#define NO_WORKSPACE_OFFSETS // Extra options for the M114 "Current Position" report -//#define M114_DETAIL // Use 'M114` for details to check planner calculations +#define M114_DETAIL // Use 'M114` for details to check planner calculations //#define M114_REALTIME // Real current position based on forward kinematics //#define M114_LEGACY // M114 used to synchronize on every call. Enable if needed. diff --git a/config/examples/Creality/CR-10 V2/Configuration.h b/config/examples/Creality/CR-10 V2/Configuration.h index 78c2dc9160..ec6ead026b 100644 --- a/config/examples/Creality/CR-10 V2/Configuration.h +++ b/config/examples/Creality/CR-10 V2/Configuration.h @@ -21,6 +21,15 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Creality/CR-10 V2" + +/** + * Creality CD-10 V2 options + */ + +// Is the BLTouch option installed? +#define CR10V2_BLTOUCH + /** * Configuration.h * @@ -69,7 +78,7 @@ // @section info // Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes. +#define STRING_CONFIG_H_AUTHOR "fran6p, CR10-V2)" // Who made the changes. //#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) /** @@ -87,10 +96,10 @@ #define SHOW_BOOTSCREEN // Show the bitmap in Marlin/_Bootscreen.h on startup. -//#define SHOW_CUSTOM_BOOTSCREEN +#define SHOW_CUSTOM_BOOTSCREEN // Show the bitmap in Marlin/_Statusscreen.h on the status screen. -//#define CUSTOM_STATUS_SCREEN_IMAGE +#define CUSTOM_STATUS_SCREEN_IMAGE // @section machine @@ -134,11 +143,11 @@ // Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_RAMPS_14_EFB + #define MOTHERBOARD BOARD_RAMPS_CREALITY #endif // Name displayed in the LCD "Ready" message and Info menu -//#define CUSTOM_MACHINE_NAME "3D Printer" +#define CUSTOM_MACHINE_NAME "CR10-V2" // Printer's unique ID, used by some programs to differentiate between machines. // Choose your own or use a service like https://www.uuidgenerator.net/version4 @@ -424,7 +433,7 @@ #define TEMP_SENSOR_5 0 #define TEMP_SENSOR_6 0 #define TEMP_SENSOR_7 0 -#define TEMP_SENSOR_BED 0 +#define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 #define TEMP_SENSOR_COOLER 0 @@ -444,11 +453,11 @@ //#define TEMP_SENSOR_1_AS_REDUNDANT #define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10 -#define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 +#define TEMP_RESIDENCY_TIME 2 // (seconds) Time to wait for hotend to "settle" in M109 #define TEMP_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer #define TEMP_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target -#define TEMP_BED_RESIDENCY_TIME 10 // (seconds) Time to wait for bed to "settle" in M190 +#define TEMP_BED_RESIDENCY_TIME 5 // (seconds) Time to wait for bed to "settle" in M190 #define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer #define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target @@ -472,7 +481,7 @@ // Above this temperature the heater will be switched off. // This can protect components from overheating, but NOT from shorts and failures. // (Use MINTEMP for thermistor short/failure protection.) -#define HEATER_0_MAXTEMP 275 +#define HEATER_0_MAXTEMP 255 #define HEATER_1_MAXTEMP 275 #define HEATER_2_MAXTEMP 275 #define HEATER_3_MAXTEMP 275 @@ -480,7 +489,7 @@ #define HEATER_5_MAXTEMP 275 #define HEATER_6_MAXTEMP 275 #define HEATER_7_MAXTEMP 275 -#define BED_MAXTEMP 150 +#define BED_MAXTEMP 120 #define CHAMBER_MAXTEMP 60 /** @@ -505,21 +514,22 @@ #define PID_K1 0.95 // Smoothing factor within any PID loop #if ENABLED(PIDTEMP) - //#define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) - //#define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) + #define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) + #define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) // Set/get with gcode: M301 E[extruder number, 0-2] + // CR10-V2 #if ENABLED(PID_PARAMS_PER_HOTEND) // Specify between 1 and HOTENDS values per array. // If fewer than EXTRUDER values are provided, the last element will be repeated. - #define DEFAULT_Kp_LIST { 22.20, 22.20 } - #define DEFAULT_Ki_LIST { 1.08, 1.08 } - #define DEFAULT_Kd_LIST { 114.00, 114.00 } + #define DEFAULT_Kp_LIST { 19.47, 19.47 } + #define DEFAULT_Ki_LIST { 1.59, 1.59 } + #define DEFAULT_Kd_LIST { 59.40, 59.40 } #else - #define DEFAULT_Kp 22.20 - #define DEFAULT_Ki 1.08 - #define DEFAULT_Kd 114.00 + #define DEFAULT_Kp 19.47 + #define DEFAULT_Ki 1.59 + #define DEFAULT_Kd 59.40 #endif #endif // PIDTEMP @@ -540,7 +550,7 @@ * heater. If your configuration is significantly different than this and you don't understand * the issues involved, don't use bed PID until someone else verifies that your hardware works. */ -//#define PIDTEMPBED +#define PIDTEMPBED //#define BED_LIMIT_SWITCHING @@ -558,9 +568,10 @@ // 120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) // from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) - #define DEFAULT_bedKp 10.00 - #define DEFAULT_bedKi .023 - #define DEFAULT_bedKd 305.4 + // CR10-V2 24V 240W + #define DEFAULT_bedKp 690.34 + #define DEFAULT_bedKi 111.47 + #define DEFAULT_bedKd 1068.83 // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. #endif // PIDTEMPBED @@ -634,7 +645,7 @@ * Note: For Bowden Extruders make this large enough to allow load/unload. */ #define PREVENT_LENGTHY_EXTRUDE -#define EXTRUDE_MAXLENGTH 200 +#define EXTRUDE_MAXLENGTH 435 //=========================================================================== //======================== Thermal Runaway Protection ======================= @@ -723,7 +734,7 @@ #define X_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. #define Y_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. #define Z_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_PROBE_ENDSTOP_INVERTING false // Set to true to invert the logic of the probe. +#define Z_MIN_PROBE_ENDSTOP_INVERTING ENABLED(CR10V2_BLTOUCH) // Set to true to invert the logic of the probe. /** * Stepper Drivers @@ -743,15 +754,15 @@ * TMC5130, TMC5130_STANDALONE, TMC5160, TMC5160_STANDALONE * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'L6474', 'POWERSTEP01', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2160', 'TMC2160_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC2209', 'TMC2209_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE', 'TMC5160', 'TMC5160_STANDALONE'] */ -#define X_DRIVER_TYPE A4988 -#define Y_DRIVER_TYPE A4988 -#define Z_DRIVER_TYPE A4988 +#define X_DRIVER_TYPE TMC2208_STANDALONE +#define Y_DRIVER_TYPE TMC2208_STANDALONE +#define Z_DRIVER_TYPE TMC2208_STANDALONE //#define X2_DRIVER_TYPE A4988 //#define Y2_DRIVER_TYPE A4988 //#define Z2_DRIVER_TYPE A4988 //#define Z3_DRIVER_TYPE A4988 //#define Z4_DRIVER_TYPE A4988 -#define E0_DRIVER_TYPE A4988 +#define E0_DRIVER_TYPE TMC2208_STANDALONE //#define E1_DRIVER_TYPE A4988 //#define E2_DRIVER_TYPE A4988 //#define E3_DRIVER_TYPE A4988 @@ -806,14 +817,14 @@ * Override with M92 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 500 } +#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 97 } /** * Default Max Feed Rate (mm/s) * Override with M203 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 } +#define DEFAULT_MAX_FEEDRATE { 750, 750, 15, 75 } //#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 #if ENABLED(LIMITED_MAX_FR_EDITING) @@ -826,7 +837,7 @@ * Override with M201 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 } +#define DEFAULT_MAX_ACCELERATION { 2000, 2000, 100, 5000 } //#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 #if ENABLED(LIMITED_MAX_ACCEL_EDITING) @@ -841,9 +852,9 @@ * M204 R Retract Acceleration * M204 T Travel Acceleration */ -#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves +#define DEFAULT_ACCELERATION 800 // X, Y, Z and E acceleration for printing moves +#define DEFAULT_RETRACT_ACCELERATION 1000 // E acceleration for retracts +#define DEFAULT_TRAVEL_ACCELERATION 800 // X, Y, Z acceleration for travel (non printing) moves /** * Default Jerk limits (mm/s) @@ -853,13 +864,13 @@ * When changing speed and direction, if the difference is less than the * value set here, it may happen instantaneously. */ -//#define CLASSIC_JERK +#define CLASSIC_JERK // Fine for mendel-style machines #if ENABLED(CLASSIC_JERK) #define DEFAULT_XJERK 10.0 #define DEFAULT_YJERK 10.0 - #define DEFAULT_ZJERK 0.3 + #define DEFAULT_ZJERK 0.4 - //#define TRAVEL_EXTRA_XYJERK 0.0 // Additional jerk allowance for all travel moves + #define TRAVEL_EXTRA_XYJERK 5.0 // Additional jerk allowance for all travel moves //#define LIMITED_JERK_EDITING // Limit edit via M205 or LCD to DEFAULT_aJERK * 2 #if ENABLED(LIMITED_JERK_EDITING) @@ -877,7 +888,7 @@ * https://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html */ #if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.013 // (mm) Distance from real junction edge + #define JUNCTION_DEVIATION_MM 0.08 // (mm) Distance from real junction edge #define JD_HANDLE_SMALL_SEGMENTS // Use curvature estimation instead of just the junction angle // for small segments (< 1mm) with large junction angles (> 135°). #endif @@ -890,7 +901,7 @@ * * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained */ -//#define S_CURVE_ACCELERATION +#define S_CURVE_ACCELERATION //=========================================================================== //============================= Z Probe Options ============================= @@ -906,11 +917,13 @@ * The probe replaces the Z-MIN endstop and is used for Z homing. * (Automatically enables USE_PROBE_FOR_Z_HOMING.) */ -#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN +//#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN // Force the use of the probe for Z-axis homing //#define USE_PROBE_FOR_Z_HOMING - +#if ENABLED(CR10V2_BLTOUCH) + #define USE_PROBE_FOR_Z_HOMING +#endif /** * Z_MIN_PROBE_PIN * @@ -928,6 +941,10 @@ */ //#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +#if ENABLED(CR10V2_BLTOUCH) + #define Z_MIN_PROBE_PIN 19 +#endif + /** * Probe Type * @@ -963,7 +980,9 @@ /** * The BLTouch probe uses a Hall effect sensor and emulates a servo. */ -//#define BLTOUCH +#if ENABLED(CR10V2_BLTOUCH) + #define BLTOUCH +#endif /** * Touch-MI Probe by hotends.fr @@ -1055,17 +1074,17 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +#define NOZZLE_TO_PROBE_OFFSET { 47, 0, 0 } // Most probes should stay away from the edges of the bed, but // with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed (mm/min) between probes -#define XY_PROBE_FEEDRATE (133*60) +#define XY_PROBE_FEEDRATE (150*60) // Feedrate (mm/min) for the first approach when double-probing (MULTIPLE_PROBING == 2) -#define Z_PROBE_FEEDRATE_FAST (4*60) +#define Z_PROBE_FEEDRATE_FAST (6*60) // Feedrate (mm/min) for the "accurate" probe of each point #define Z_PROBE_FEEDRATE_SLOW (Z_PROBE_FEEDRATE_FAST / 2) @@ -1106,7 +1125,7 @@ * A total of 2 does fast/slow probes with a weighted average. * A total of 3 or more adds more slow probes, taking the average. */ -//#define MULTIPLE_PROBING 2 +#define MULTIPLE_PROBING 2 //#define EXTRA_PROBING 1 /** @@ -1126,16 +1145,18 @@ #define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow #define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points #define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes -//#define Z_AFTER_PROBING 5 // Z position after probing is done +#define Z_AFTER_PROBING 5 // Z position after probing is done #define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping // For M851 give a range for adjusting the Z probe offset -#define Z_PROBE_OFFSET_RANGE_MIN -20 -#define Z_PROBE_OFFSET_RANGE_MAX 20 +#define Z_PROBE_OFFSET_RANGE_MIN -9 +#define Z_PROBE_OFFSET_RANGE_MAX 9 // Enable the M48 repeatability test to test probe accuracy -//#define Z_MIN_PROBE_REPEATABILITY_TEST +#if ENABLED(CR10V2_BLTOUCH) + #define Z_MIN_PROBE_REPEATABILITY_TEST +#endif // Before deploy/stow pause for user confirmation //#define PAUSE_BEFORE_DEPLOY_STOW @@ -1191,8 +1212,8 @@ // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR false -#define INVERT_Y_DIR true -#define INVERT_Z_DIR false +#define INVERT_Y_DIR false +#define INVERT_Z_DIR true // @section extruder @@ -1218,7 +1239,7 @@ */ //#define Z_IDLE_HEIGHT Z_HOME_POS -//#define Z_HOMING_HEIGHT 4 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ... +#define Z_HOMING_HEIGHT 4 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ... // Be sure to have this much clearance over your Z_MAX_POS to prevent grinding. //#define Z_AFTER_HOMING 10 // (mm) Height to move to after homing Z @@ -1232,8 +1253,8 @@ // @section machine // The size of the printable area -#define X_BED_SIZE 200 -#define Y_BED_SIZE 200 +#define X_BED_SIZE 310 // Nozzle is at X0 when homed +#define Y_BED_SIZE 310 // Nozzle is at Y0 when homed // Travel limits (mm) after homing, corresponding to endstop positions. #define X_MIN_POS 0 @@ -1241,7 +1262,7 @@ #define Z_MIN_POS 0 #define X_MAX_POS X_BED_SIZE #define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 200 +#define Z_MAX_POS 400 // 410 /** * Software Endstops @@ -1269,7 +1290,7 @@ #endif #if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS) - //#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD + #define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD #endif /** @@ -1285,10 +1306,11 @@ * RAMPS-based boards use SERVO3_PIN for the first runout sensor. * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. */ -//#define FILAMENT_RUNOUT_SENSOR +#define FILAMENT_RUNOUT_SENSOR #if ENABLED(FILAMENT_RUNOUT_SENSOR) #define FIL_RUNOUT_ENABLED_DEFAULT true // Enable the sensor on startup. Override with M412 followed by M500. #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. + #define FIL_RUNOUT_PIN 2 // Creality CR10-S stock sensor #define FIL_RUNOUT_STATE LOW // Pin state indicating that filament is NOT present. #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. @@ -1337,7 +1359,7 @@ // After a runout is detected, continue printing this length of filament // before executing the runout script. Useful for a sensor at the end of // a feed tube. Requires 4 bytes SRAM per sensor, plus 4 bytes overhead. - //#define FILAMENT_RUNOUT_DISTANCE_MM 25 + #define FILAMENT_RUNOUT_DISTANCE_MM 5 #ifdef FILAMENT_RUNOUT_DISTANCE_MM // Enable this option to use an encoder disc that toggles the runout pin @@ -1387,7 +1409,9 @@ */ //#define AUTO_BED_LEVELING_3POINT //#define AUTO_BED_LEVELING_LINEAR -//#define AUTO_BED_LEVELING_BILINEAR +#if ENABLED(CR10V2_BLTOUCH) + #define AUTO_BED_LEVELING_BILINEAR +#endif //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING @@ -1396,7 +1420,9 @@ * these options to restore the prior leveling state or to always enable * leveling immediately after G28. */ -//#define RESTORE_LEVELING_AFTER_G28 +#if ENABLED(CR10V2_BLTOUCH) + #define RESTORE_LEVELING_AFTER_G28 +#endif //#define ENABLE_LEVELING_AFTER_G28 /** @@ -1433,12 +1459,12 @@ // split up moves into short segments like a Delta. This follows the // contours of the bed more closely than edge-to-edge straight moves. #define SEGMENT_LEVELED_MOVES - #define LEVELED_SEGMENT_LENGTH 5.0 // (mm) Length of all segments (except the last one) + #define LEVELED_SEGMENT_LENGTH 20.0 // (mm) Length of all segments (except the last one) /** * Enable the G26 Mesh Validation Pattern tool. */ - //#define G26_MESH_VALIDATION + #define G26_MESH_VALIDATION // Enable G26 mesh validation #if ENABLED(G26_MESH_VALIDATION) #define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle. #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for G26. @@ -1454,7 +1480,7 @@ #if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR) // Set the number of grid points per dimension. - #define GRID_MAX_POINTS_X 3 + #define GRID_MAX_POINTS_X 5 #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X // Probe along the Y axis, advancing X after each column @@ -1484,7 +1510,7 @@ //========================= Unified Bed Leveling ============================ //=========================================================================== - //#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh + #define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh #define MESH_INSET 1 // Set Mesh bounds as an inset region of the bed #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. @@ -1495,7 +1521,7 @@ #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 - //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used + #define UBL_Z_RAISE_WHEN_OFF_MESH 0 // When the nozzle is off the mesh, this value is used // as the Z-Height correction value. //#define UBL_MESH_WIZARD // Run several commands in a row to get a complete mesh @@ -1506,9 +1532,9 @@ //=================================== Mesh ================================== //=========================================================================== - #define MESH_INSET 10 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 3 // Don't use more than 7 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X + #define MESH_INSET 30 // Set Mesh bounds as an inset region of the bed + //#define GRID_MAX_POINTS_X 3 // Don't use more than 7 points per axis, implementation limited. + //#define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS @@ -1518,12 +1544,14 @@ * Add a bed leveling sub-menu for ABL or MBL. * Include a guided procedure if manual probing is enabled. */ -//#define LCD_BED_LEVELING +#if ENABLED(CR10V2_BLTOUCH) + #define LCD_BED_LEVELING +#endif #if ENABLED(LCD_BED_LEVELING) #define MESH_EDIT_Z_STEP 0.025 // (mm) Step size while manually probing Z axis. #define LCD_PROBE_Z_RANGE 4 // (mm) Z Range centered on Z_MIN_POS for LCD Z adjustment - //#define MESH_EDIT_MENU // Add a menu to edit mesh points + #define MESH_EDIT_MENU // Add a menu to edit mesh points #endif // Add a menu item to move between bed corners for manual bed adjustment @@ -1574,8 +1602,8 @@ // Manually set the home position. Leave these undefined for automatic settings. // For DELTA this is the top-center of the Cartesian print volume. -//#define MANUAL_X_HOME_POS 0 -//#define MANUAL_Y_HOME_POS 0 +//#define MANUAL_X_HOME_POS X_MIN_POS +//#define MANUAL_Y_HOME_POS Y_MIN_POS //#define MANUAL_Z_HOME_POS 0 // Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area. @@ -1587,7 +1615,9 @@ // - Move the Z probe (or nozzle) to a defined XY point before Z Homing. // - Prevent Z homing when the Z probe is outside bed area. // -//#define Z_SAFE_HOMING +#if ENABLED(CR10V2_BLTOUCH) + #define Z_SAFE_HOMING +#endif #if ENABLED(Z_SAFE_HOMING) #define Z_SAFE_HOMING_X_POINT X_CENTER // X point for Z homing @@ -1595,7 +1625,7 @@ #endif // Homing speeds (mm/min) -#define HOMING_FEEDRATE_MM_M { (50*60), (50*60), (4*60) } +#define HOMING_FEEDRATE_MM_M { (50*60), (50*60), (6*60) } // Validate that endstops are triggered on homing moves #define VALIDATE_HOMING_ENDSTOPS @@ -1672,7 +1702,7 @@ * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) */ -//#define EEPROM_SETTINGS // Persistent storage with M500 and M501 +#define EEPROM_SETTINGS // Persistent storage with M500 and M501 //#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. #define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load @@ -1706,14 +1736,14 @@ // Preheat Constants - Up to 5 are supported without changes // #define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 180 -#define PREHEAT_1_TEMP_BED 70 +#define PREHEAT_1_TEMP_HOTEND 205 +#define PREHEAT_1_TEMP_BED 60 #define PREHEAT_1_TEMP_CHAMBER 35 #define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 -#define PREHEAT_2_LABEL "ABS" -#define PREHEAT_2_TEMP_HOTEND 240 -#define PREHEAT_2_TEMP_BED 110 +#define PREHEAT_2_LABEL "PETG" +#define PREHEAT_2_TEMP_HOTEND 230 +#define PREHEAT_2_TEMP_BED 80 #define PREHEAT_2_TEMP_CHAMBER 35 #define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 @@ -1728,15 +1758,15 @@ * P1 Raise the nozzle always to Z-park height. * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. */ -//#define NOZZLE_PARK_FEATURE +#define NOZZLE_PARK_FEATURE #if ENABLED(NOZZLE_PARK_FEATURE) // Specify a park position as { X, Y, Z_raise } - #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 } //#define NOZZLE_PARK_X_ONLY // X move only is required to park //#define NOZZLE_PARK_Y_ONLY // Y move only is required to park #define NOZZLE_PARK_Z_RAISE_MIN 2 // (mm) Always raise Z by at least this distance - #define NOZZLE_PARK_XY_FEEDRATE 100 // (mm/s) X and Y axes feedrate (also used for delta Z axis) + #define NOZZLE_PARK_POINT { (X_MIN_POS + 5), (Y_MAX_POS - 5), 10 } + #define NOZZLE_PARK_XY_FEEDRATE 80 // (mm/s) X and Y axes feedrate (also used for delta Z axis) #define NOZZLE_PARK_Z_FEEDRATE 5 // (mm/s) Z axis feedrate (not used for delta printers) #endif @@ -1845,7 +1875,7 @@ * * View the current statistics with M78. */ -//#define PRINTCOUNTER +#define PRINTCOUNTER #if ENABLED(PRINTCOUNTER) #define PRINTCOUNTER_SAVE_INTERVAL 60 // (minutes) EEPROM save interval during print #endif @@ -1921,7 +1951,7 @@ * * :['JAPANESE', 'WESTERN', 'CYRILLIC'] */ -#define DISPLAY_CHARSET_HD44780 JAPANESE +#define DISPLAY_CHARSET_HD44780 WESTERN /** * Info Screen Style (0:Classic, 1:Průša) @@ -1936,7 +1966,7 @@ * SD Card support is disabled by default. If your controller has an SD slot, * you must uncomment the following option or it won't work. */ -//#define SDSUPPORT +#define SDSUPPORT /** * SD CARD: ENABLE CRC @@ -1966,7 +1996,7 @@ // Use this option to override the number of step signals required to // move between next/prev menu items. // -//#define ENCODER_STEPS_PER_MENU_ITEM 1 +#define ENCODER_STEPS_PER_MENU_ITEM 1 /** * Encoder Direction Options @@ -2006,7 +2036,7 @@ // // Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. // -//#define INDIVIDUAL_AXIS_HOMING_MENU +#define INDIVIDUAL_AXIS_HOMING_MENU // // SPEAKER/BUZZER @@ -2195,7 +2225,7 @@ // RepRapDiscount FULL GRAPHIC Smart Controller // https://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller // -//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER +#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER // // K.3D Full Graphic Smart Controller diff --git a/config/examples/Creality/CR-10 V2/Configuration_adv.h b/config/examples/Creality/CR-10 V2/Configuration_adv.h index 5335fa012a..9665797937 100644 --- a/config/examples/Creality/CR-10 V2/Configuration_adv.h +++ b/config/examples/Creality/CR-10 V2/Configuration_adv.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Creality/CR-10 V2" + /** * Configuration_adv.h * @@ -238,12 +240,12 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 60 // Seconds + #define THERMAL_PROTECTION_HYSTERESIS 10 // Degrees Celsius - //#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops + #define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops #if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP) - //#define NO_FAN_SLOWING_IN_PID_TUNING // Don't slow fan speed during M303 + #define NO_FAN_SLOWING_IN_PID_TUNING // Don't slow fan speed during M303 #endif /** @@ -258,7 +260,7 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 20 // Seconds + #define WATCH_TEMP_PERIOD 50 // Seconds #define WATCH_TEMP_INCREASE 2 // Degrees Celsius #endif @@ -266,13 +268,13 @@ * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_BED_PERIOD 50 // Seconds #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds + #define WATCH_BED_TEMP_PERIOD 180 // Seconds #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius #endif @@ -479,7 +481,7 @@ // When first starting the main fan, run it at full speed for the // given number of milliseconds. This gets the fan spinning reliably // before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) -//#define FAN_KICKSTART_TIME 100 +#define FAN_KICKSTART_TIME 100 // Some coolers may require a non-zero "off" state. //#define FAN_OFF_PWM 1 @@ -741,7 +743,7 @@ //#define HOMING_BACKOFF_POST_MM { 2, 2, 2 } // (mm) Backoff from endstops after homing -//#define QUICK_HOME // If G28 contains XY do a diagonal move first +#define QUICK_HOME // If G28 contains XY do a diagonal move first //#define HOME_Y_BEFORE_X // If G28 contains XY home Y before X //#define HOME_Z_FIRST // Home Z first. Requires a Z-MIN endstop (not a probe). //#define CODEPENDENT_XY_HOMING // If X/Y can't home without homing Y/X first @@ -792,7 +794,7 @@ * differs, a mode set eeprom write will be completed at initialization. * Use the option below to force an eeprom write to a V3.1 probe regardless. */ - //#define BLTOUCH_SET_5V_MODE + #define BLTOUCH_SET_5V_MODE /** * Safety: Activate if connecting a probe with an unknown voltage mode. @@ -867,7 +869,7 @@ // On a 300mm bed a 5% grade would give a misalignment of ~1.5cm #define G34_MAX_GRADE 5 // (%) Maximum incline that G34 will handle - #define Z_STEPPER_ALIGN_ITERATIONS 5 // Number of iterations to apply during alignment + #define Z_STEPPER_ALIGN_ITERATIONS 3 // Number of iterations to apply during alignment #define Z_STEPPER_ALIGN_ACC 0.02 // Stop iterating early if the accuracy is better than this #define RESTORE_LEVELING_AFTER_G34 // Restore leveling after G34 is done? // After G34, re-home Z (G28 Z) or just calculate it from the last probe heights? @@ -1175,7 +1177,7 @@ #endif // Include a page of printer information in the LCD Main Menu - //#define LCD_INFO_MENU + #define LCD_INFO_MENU #if ENABLED(LCD_INFO_MENU) //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages #endif @@ -1219,7 +1221,7 @@ #if HAS_DISPLAY // The timeout (in ms) to return to the status screen from sub-menus - //#define LCD_TIMEOUT_TO_STATUS 15000 + #define LCD_TIMEOUT_TO_STATUS 15000 #if ENABLED(SHOW_BOOTSCREEN) #define BOOTSCREEN_TIMEOUT 4000 // (ms) Total Duration to display the boot screen(s) @@ -1229,13 +1231,13 @@ #endif // Scroll a longer status message into view - //#define STATUS_MESSAGE_SCROLLING + #define STATUS_MESSAGE_SCROLLING // On the Info Screen, display XY with one decimal place when possible - //#define LCD_DECIMAL_SMALL_XY + #define LCD_DECIMAL_SMALL_XY // Add an 'M73' G-code to set the current percentage - //#define LCD_SET_PROGRESS_MANUALLY + #define LCD_SET_PROGRESS_MANUALLY // Show the E position (filament used) during printing //#define LCD_SHOW_E_TOTAL @@ -1253,7 +1255,7 @@ #endif #if EITHER(HAS_MARLINUI_HD44780, IS_TFTGLCD_PANEL) - //#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing + #define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing #if ENABLED(LCD_PROGRESS_BAR) #define PROGRESS_BAR_BAR_TIME 2000 // (ms) Amount of time to show the bar #define PROGRESS_BAR_MSG_TIME 3000 // (ms) Amount of time to show the status message @@ -1361,15 +1363,15 @@ * - SDSORT_CACHE_NAMES will retain the sorted file listing in RAM. (Expensive!) * - SDSORT_DYNAMIC_RAM only uses RAM when the SD menu is visible. (Use with caution!) */ - //#define SDCARD_SORT_ALPHA + #define SDCARD_SORT_ALPHA // SD Card Sorting options #if ENABLED(SDCARD_SORT_ALPHA) #define SDSORT_LIMIT 40 // Maximum number of sorted items (10-256). Costs 27 bytes each. #define FOLDER_SORTING -1 // -1=above 0=none 1=below #define SDSORT_GCODE false // Allow turning sorting on/off with LCD and M34 G-code. - #define SDSORT_USES_RAM false // Pre-allocate a static array for faster pre-sorting. - #define SDSORT_USES_STACK false // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.) + #define SDSORT_USES_RAM true // Pre-allocate a static array for faster pre-sorting. + #define SDSORT_USES_STACK true // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.) #define SDSORT_CACHE_NAMES false // Keep sorted items in RAM longer for speedy performance. Most expensive option. #define SDSORT_DYNAMIC_RAM false // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use! #define SDSORT_CACHE_VFATS 2 // Maximum number of 13-byte VFAT entries to use for sorting. @@ -1381,10 +1383,10 @@ //#define UTF_FILENAME_SUPPORT // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT + #define LONG_FILENAME_HOST_SUPPORT // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES + #define SCROLL_LONG_FILENAMES // Leave the heaters on after Stop Print (not recommended!) //#define SD_ABORT_NO_COOLDOWN @@ -1406,7 +1408,7 @@ /** * Auto-report SdCard status with M27 S */ - //#define AUTO_REPORT_SD_STATUS + #define AUTO_REPORT_SD_STATUS /** * Support for USB thumb drives using an Arduino USB Host Shield or @@ -1512,7 +1514,7 @@ */ #if HAS_MARLINUI_U8GLIB // Show SD percentage next to the progress bar - //#define DOGM_SD_PERCENT + #define DOGM_SD_PERCENT // Save many cycles by drawing a hollow frame or no frame on the Info Screen //#define XYZ_NO_FRAME @@ -1790,18 +1792,19 @@ * * Warning: Does not respect endstops! */ -//#define BABYSTEPPING +#if ENABLED(CR10V2_BLTOUCH) + #define BABYSTEPPING +#endif #if ENABLED(BABYSTEPPING) //#define INTEGRATED_BABYSTEPPING // EXPERIMENTAL integration of babystepping into the Stepper ISR //#define BABYSTEP_WITHOUT_HOMING - //#define BABYSTEP_ALWAYS_AVAILABLE // Allow babystepping at all times (not just during movement). + #define BABYSTEP_ALWAYS_AVAILABLE // Allow babystepping at all times (not just during movement). //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way //#define BABYSTEP_MILLIMETER_UNITS // Specify BABYSTEP_MULTIPLICATOR_(XY|Z) in mm instead of micro-steps - #define BABYSTEP_MULTIPLICATOR_Z 1 // (steps or mm) Steps or millimeter distance for each Z babystep + #define BABYSTEP_MULTIPLICATOR_Z 4 // (steps or mm) Steps or millimeter distance for each Z babystep #define BABYSTEP_MULTIPLICATOR_XY 1 // (steps or mm) Steps or millimeter distance for each XY babystep - - //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. + #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. // Note: Extra time may be added to mitigate controller latency. @@ -1813,10 +1816,12 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 - //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping + #if ENABLED(CR10V2_BLTOUCH) + #define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping + #endif #if ENABLED(BABYSTEP_ZPROBE_OFFSET) //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - //#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor + #define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif @@ -1902,7 +1907,7 @@ * Repeatedly attempt G29 leveling until it succeeds. * Stop after G29_MAX_RETRIES attempts. */ -//#define G29_RETRY_AND_RECOVER +#define G29_RETRY_AND_RECOVER #if ENABLED(G29_RETRY_AND_RECOVER) #define G29_MAX_RETRIES 3 #define G29_HALT_ON_FAILURE @@ -1986,10 +1991,10 @@ #if ENABLED(ARC_SUPPORT) #define MM_PER_ARC_SEGMENT 1 // (mm) Length (or minimum length) of each arc segment //#define ARC_SEGMENTS_PER_R 1 // Max segment length, MM_PER = Min - #define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle + #define MIN_ARC_SEGMENTS 16 // Minimum number of segments in a complete circle // 24 //#define ARC_SEGMENTS_PER_SEC 50 // Use feedrate to choose segment length (with MM_PER_ARC_SEGMENT as the minimum) #define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections - //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles + #define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles // commenté //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes //#define SF_ARC_FIX // Enable only if using SkeinForge with "Arc Point" fillet procedure #endif @@ -2141,7 +2146,7 @@ * Currently handles M108, M112, M410, M876 * NOTE: Not yet implemented for all platforms. */ -//#define EMERGENCY_PARSER +#define EMERGENCY_PARSER /** * Realtime Reporting (requires EMERGENCY_PARSER) @@ -2170,7 +2175,7 @@ //#define NO_TIMEOUTS 1000 // Milliseconds // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. -//#define ADVANCED_OK +#define ADVANCED_OK // Printrun may have trouble receiving long strings all at once. // This option inserts short delays between lines of serial output. @@ -2311,49 +2316,49 @@ * * Enable PARK_HEAD_ON_PAUSE to add the G-code M125 Pause and Park. */ -//#define ADVANCED_PAUSE_FEATURE +#define ADVANCED_PAUSE_FEATURE #if ENABLED(ADVANCED_PAUSE_FEATURE) #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. - #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. + #define PAUSE_PARK_RETRACT_LENGTH 4 // (mm) Initial retract. // This short retract is done immediately, before parking the nozzle. - #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast. + #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 40 // (mm/s) Unload filament feedrate. This can be pretty fast. #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload. + #define FILAMENT_CHANGE_UNLOAD_LENGTH 435 // (mm) The length of filament for a complete unload. // For Bowden, the full length of the tube and nozzle. // For direct drive, the full length of the nozzle. // Set to 0 for manual unloading. #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE 6 // (mm/s) Slow move when starting load. #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 0 // (mm) Slow length, to allow time to insert material. // 0 to disable start loading and skip to fast load only - #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast. - #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle. + #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 30 // (mm/s) Load filament feedrate. This can be pretty fast. + #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 15 // (mm/s^2) Lower acceleration may allow a faster feedrate. + #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 430 // (mm) Load length of filament, from extruder gear to nozzle. // For Bowden, the full length of the tube and nozzle. // For direct drive, the full length of the nozzle. //#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted. #define ADVANCED_PAUSE_PURGE_FEEDRATE 3 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate. - #define ADVANCED_PAUSE_PURGE_LENGTH 50 // (mm) Length to extrude after loading. + #define ADVANCED_PAUSE_PURGE_LENGTH 20 // (mm) Length to extrude after loading. // Set to 0 for manual extrusion. // Filament can be extruded repeatedly from the Filament Change menu // until extrusion is consistent, and to purge old filament. #define ADVANCED_PAUSE_RESUME_PRIME 0 // (mm) Extra distance to prime nozzle after returning from park. - //#define ADVANCED_PAUSE_FANS_PAUSE // Turn off print-cooling fans while the machine is paused. + #define ADVANCED_PAUSE_FANS_PAUSE // Turn off print-cooling fans while the machine is paused. // Filament Unload does a Retract, Delay, and Purge first: - #define FILAMENT_UNLOAD_PURGE_RETRACT 13 // (mm) Unload initial retract length. + #define FILAMENT_UNLOAD_PURGE_RETRACT 4 // (mm) Unload initial retract length. #define FILAMENT_UNLOAD_PURGE_DELAY 5000 // (ms) Delay for the filament to cool after retract. - #define FILAMENT_UNLOAD_PURGE_LENGTH 8 // (mm) An unretract is done, then this length is purged. + #define FILAMENT_UNLOAD_PURGE_LENGTH 0 // (mm) An unretract is done, then this length is purged. #define FILAMENT_UNLOAD_PURGE_FEEDRATE 25 // (mm/s) feedrate to purge before unload #define PAUSE_PARK_NOZZLE_TIMEOUT 45 // (seconds) Time limit before the nozzle is turned off for safety. - #define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed. + #define FILAMENT_CHANGE_ALERT_BEEPS 2 // Number of alert beeps to play when a response is needed. #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change. - //#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. - //#define HOME_BEFORE_FILAMENT_CHANGE // If needed, home before parking for filament change + #define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. + #define HOME_BEFORE_FILAMENT_CHANGE // If needed, home before parking for filament change - //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. - //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) + #define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. + #define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) #endif // @section tmc @@ -2493,7 +2498,7 @@ #define INTERPOLATE true #if AXIS_IS_TMC(X) - #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. + #define X_CURRENT 730 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for sensorless homing #define X_MICROSTEPS 16 // 0..256 #define X_RSENSE 0.11 @@ -2511,7 +2516,7 @@ #endif #if AXIS_IS_TMC(Y) - #define Y_CURRENT 800 + #define Y_CURRENT 730 #define Y_CURRENT_HOME Y_CURRENT #define Y_MICROSTEPS 16 #define Y_RSENSE 0.11 @@ -2529,7 +2534,7 @@ #endif #if AXIS_IS_TMC(Z) - #define Z_CURRENT 800 + #define Z_CURRENT 850 #define Z_CURRENT_HOME Z_CURRENT #define Z_MICROSTEPS 16 #define Z_RSENSE 0.11 @@ -2538,7 +2543,7 @@ #endif #if AXIS_IS_TMC(Z2) - #define Z2_CURRENT 800 + #define Z2_CURRENT 850 #define Z2_CURRENT_HOME Z2_CURRENT #define Z2_MICROSTEPS Z_MICROSTEPS #define Z2_RSENSE 0.11 @@ -2565,7 +2570,7 @@ #endif #if AXIS_IS_TMC(E0) - #define E0_CURRENT 800 + #define E0_CURRENT 730 #define E0_MICROSTEPS 16 #define E0_RSENSE 0.11 #define E0_CHAIN_POS -1 @@ -2573,7 +2578,7 @@ #endif #if AXIS_IS_TMC(E1) - #define E1_CURRENT 800 + #define E1_CURRENT 730 #define E1_MICROSTEPS E0_MICROSTEPS #define E1_RSENSE 0.11 #define E1_CHAIN_POS -1 @@ -2702,7 +2707,7 @@ */ #define STEALTHCHOP_XY #define STEALTHCHOP_Z - #define STEALTHCHOP_E + //#define STEALTHCHOP_E /** * Optimize spreadCycle chopper parameters by using predefined parameter sets @@ -2719,7 +2724,7 @@ * Define your own with: * { , , hysteresis_start[1..8] } */ - #define CHOPPER_TIMING CHOPPER_DEFAULT_12V // All axes (override below) + #define CHOPPER_TIMING CHOPPER_DEFAULT_24V // All axes (override below) //#define CHOPPER_TIMING_X CHOPPER_TIMING // For X Axes (override below) //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X //#define CHOPPER_TIMING_Y CHOPPER_TIMING // For Y Axes (override below) @@ -2765,15 +2770,15 @@ */ //#define HYBRID_THRESHOLD - #define X_HYBRID_THRESHOLD 100 // [mm/s] + #define X_HYBRID_THRESHOLD 150 // [mm/s] #define X2_HYBRID_THRESHOLD 100 - #define Y_HYBRID_THRESHOLD 100 + #define Y_HYBRID_THRESHOLD 150 #define Y2_HYBRID_THRESHOLD 100 - #define Z_HYBRID_THRESHOLD 3 - #define Z2_HYBRID_THRESHOLD 3 + #define Z_HYBRID_THRESHOLD 10 + #define Z2_HYBRID_THRESHOLD 10 #define Z3_HYBRID_THRESHOLD 3 #define Z4_HYBRID_THRESHOLD 3 - #define E0_HYBRID_THRESHOLD 30 + #define E0_HYBRID_THRESHOLD 50 #define E1_HYBRID_THRESHOLD 30 #define E2_HYBRID_THRESHOLD 30 #define E3_HYBRID_THRESHOLD 30 @@ -2839,7 +2844,7 @@ * Beta feature! * Create a 50/50 square wave step pulse optimal for stepper drivers. */ - //#define SQUARE_WAVE_STEPPING + #define SQUARE_WAVE_STEPPING /** * Enable M122 debugging command for TMC stepper drivers. @@ -3358,11 +3363,14 @@ */ //#define FILAMENT_WIDTH_SENSOR +#define DEFAULT_STDDEV_FILAMENT_DIA 0.05 // Typical estimate for cheap filament +//#define DEFAULT_STDDEV_FILAMENT_DIA 0.02 // Typical advertised for higher quality filament + #if ENABLED(FILAMENT_WIDTH_SENSOR) #define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor. :[0,1,2,3,4] #define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber - #define FILWIDTH_ERROR_MARGIN 1.0 // (mm) If a measurement differs too much from nominal width ignore it + #define FILWIDTH_ERROR_MARGIN (DEFAULT_STDDEV_FILAMENT_DIA*4) // (mm) If a measurement differs too much from nominal width ignore it #define MAX_MEASUREMENT_DELAY 20 // (bytes) Buffer size for stored measurements (1 byte per cm). Must be larger than MEASUREMENT_DELAY_CM. #define DEFAULT_MEASURED_FILAMENT_DIA DEFAULT_NOMINAL_FILAMENT_DIA // Set measured to nominal initially @@ -3471,10 +3479,10 @@ * - M206 and M428 are disabled. * - G92 will revert to its behavior from Marlin 1.0. */ -//#define NO_WORKSPACE_OFFSETS +#define NO_WORKSPACE_OFFSETS // Extra options for the M114 "Current Position" report -//#define M114_DETAIL // Use 'M114` for details to check planner calculations +#define M114_DETAIL // Use 'M114` for details to check planner calculations //#define M114_REALTIME // Real current position based on forward kinematics //#define M114_LEGACY // M114 used to synchronize on every call. Enable if needed. @@ -3548,10 +3556,10 @@ // Custom Menu: Main Menu //#define CUSTOM_MENU_MAIN #if ENABLED(CUSTOM_MENU_MAIN) - //#define CUSTOM_MENU_MAIN_TITLE "Custom Commands" + #define CUSTOM_MENU_MAIN_TITLE "Custom Commands" #define CUSTOM_MENU_MAIN_SCRIPT_DONE "M117 User Script Done" #define CUSTOM_MENU_MAIN_SCRIPT_AUDIBLE_FEEDBACK - //#define CUSTOM_MENU_MAIN_SCRIPT_RETURN // Return to status screen after a script + #define CUSTOM_MENU_MAIN_SCRIPT_RETURN // Return to status screen after a script #define CUSTOM_MENU_MAIN_ONLY_IDLE // Only show custom menu when the machine is idle #define MAIN_MENU_ITEM_1_DESC "Home & UBL Info" @@ -3562,16 +3570,16 @@ #define MAIN_MENU_ITEM_2_GCODE "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND) //#define MAIN_MENU_ITEM_2_CONFIRM - //#define MAIN_MENU_ITEM_3_DESC "Preheat for " PREHEAT_2_LABEL - //#define MAIN_MENU_ITEM_3_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) + #define MAIN_MENU_ITEM_3_DESC "Preheat for " PREHEAT_2_LABEL + #define MAIN_MENU_ITEM_3_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) //#define MAIN_MENU_ITEM_3_CONFIRM - //#define MAIN_MENU_ITEM_4_DESC "Heat Bed/Home/Level" - //#define MAIN_MENU_ITEM_4_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29" + #define MAIN_MENU_ITEM_4_DESC "Heat Bed/Home/Level" + #define MAIN_MENU_ITEM_4_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29" //#define MAIN_MENU_ITEM_4_CONFIRM - //#define MAIN_MENU_ITEM_5_DESC "Home & Info" - //#define MAIN_MENU_ITEM_5_GCODE "G28\nM503" + #define MAIN_MENU_ITEM_5_DESC "Home & Info" + #define MAIN_MENU_ITEM_5_GCODE "G28\nM503" //#define MAIN_MENU_ITEM_5_CONFIRM #endif @@ -3650,9 +3658,9 @@ * Host Prompt Support enables Marlin to use the host for user prompts so * filament runout and other processes can be managed from the host side. */ -//#define HOST_ACTION_COMMANDS +#define HOST_ACTION_COMMANDS #if ENABLED(HOST_ACTION_COMMANDS) - //#define HOST_PROMPT_SUPPORT + #define HOST_PROMPT_SUPPORT //#define HOST_START_MENU_ITEM // Add a menu item that tells the host to start #endif @@ -3661,10 +3669,7 @@ * * Implement M486 to allow Marlin to skip objects */ -//#define CANCEL_OBJECTS -#if ENABLED(CANCEL_OBJECTS) - #define CANCEL_OBJECTS_REPORTING // Emit the current object as a status message -#endif +#define CANCEL_OBJECTS /** * I2C position encoders for closed loop control. diff --git a/config/examples/Creality/CR-10 V3/Configuration.h b/config/examples/Creality/CR-10 V3/Configuration.h index 78c2dc9160..d701b77142 100644 --- a/config/examples/Creality/CR-10 V3/Configuration.h +++ b/config/examples/Creality/CR-10 V3/Configuration.h @@ -1,6 +1,6 @@ /** * Marlin 3D Printer Firmware - * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * Copyright (c) 2021 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * * Based on Sprinter and grbl. * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm @@ -21,6 +21,15 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Creality/CR-10 V3" + +/** + * Creality CD-10 V3 options + */ + +// Is the BLTouch option installed? +#define CR10V3_BLTOUCH + /** * Configuration.h * @@ -69,7 +78,7 @@ // @section info // Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes. +#define STRING_CONFIG_H_AUTHOR "Aaron Just, CR10-V3)" // Who made the changes. //#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) /** @@ -87,10 +96,10 @@ #define SHOW_BOOTSCREEN // Show the bitmap in Marlin/_Bootscreen.h on startup. -//#define SHOW_CUSTOM_BOOTSCREEN +#define SHOW_CUSTOM_BOOTSCREEN // Show the bitmap in Marlin/_Statusscreen.h on the status screen. -//#define CUSTOM_STATUS_SCREEN_IMAGE +#define CUSTOM_STATUS_SCREEN_IMAGE // @section machine @@ -134,11 +143,11 @@ // Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_RAMPS_14_EFB + #define MOTHERBOARD BOARD_RAMPS_CREALITY #endif // Name displayed in the LCD "Ready" message and Info menu -//#define CUSTOM_MACHINE_NAME "3D Printer" +#define CUSTOM_MACHINE_NAME "CR10-V3" // Printer's unique ID, used by some programs to differentiate between machines. // Choose your own or use a service like https://www.uuidgenerator.net/version4 @@ -424,7 +433,7 @@ #define TEMP_SENSOR_5 0 #define TEMP_SENSOR_6 0 #define TEMP_SENSOR_7 0 -#define TEMP_SENSOR_BED 0 +#define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 #define TEMP_SENSOR_COOLER 0 @@ -444,11 +453,11 @@ //#define TEMP_SENSOR_1_AS_REDUNDANT #define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10 -#define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 +#define TEMP_RESIDENCY_TIME 2 // (seconds) Time to wait for hotend to "settle" in M109 #define TEMP_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer #define TEMP_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target -#define TEMP_BED_RESIDENCY_TIME 10 // (seconds) Time to wait for bed to "settle" in M190 +#define TEMP_BED_RESIDENCY_TIME 5 // (seconds) Time to wait for bed to "settle" in M190 #define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer #define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target @@ -472,7 +481,7 @@ // Above this temperature the heater will be switched off. // This can protect components from overheating, but NOT from shorts and failures. // (Use MINTEMP for thermistor short/failure protection.) -#define HEATER_0_MAXTEMP 275 +#define HEATER_0_MAXTEMP 255 #define HEATER_1_MAXTEMP 275 #define HEATER_2_MAXTEMP 275 #define HEATER_3_MAXTEMP 275 @@ -480,7 +489,7 @@ #define HEATER_5_MAXTEMP 275 #define HEATER_6_MAXTEMP 275 #define HEATER_7_MAXTEMP 275 -#define BED_MAXTEMP 150 +#define BED_MAXTEMP 120 #define CHAMBER_MAXTEMP 60 /** @@ -505,21 +514,22 @@ #define PID_K1 0.95 // Smoothing factor within any PID loop #if ENABLED(PIDTEMP) - //#define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) - //#define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) + #define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) + #define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) // Set/get with gcode: M301 E[extruder number, 0-2] + // CR10-V3 #if ENABLED(PID_PARAMS_PER_HOTEND) // Specify between 1 and HOTENDS values per array. // If fewer than EXTRUDER values are provided, the last element will be repeated. - #define DEFAULT_Kp_LIST { 22.20, 22.20 } - #define DEFAULT_Ki_LIST { 1.08, 1.08 } - #define DEFAULT_Kd_LIST { 114.00, 114.00 } + #define DEFAULT_Kp_LIST { 19.47, 19.47 } + #define DEFAULT_Ki_LIST { 1.59, 1.59 } + #define DEFAULT_Kd_LIST { 59.40, 59.40 } #else - #define DEFAULT_Kp 22.20 - #define DEFAULT_Ki 1.08 - #define DEFAULT_Kd 114.00 + #define DEFAULT_Kp 19.47 + #define DEFAULT_Ki 1.59 + #define DEFAULT_Kd 59.40 #endif #endif // PIDTEMP @@ -540,7 +550,7 @@ * heater. If your configuration is significantly different than this and you don't understand * the issues involved, don't use bed PID until someone else verifies that your hardware works. */ -//#define PIDTEMPBED +#define PIDTEMPBED //#define BED_LIMIT_SWITCHING @@ -558,9 +568,10 @@ // 120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) // from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) - #define DEFAULT_bedKp 10.00 - #define DEFAULT_bedKi .023 - #define DEFAULT_bedKd 305.4 + // CR10-V3 24V 240W + #define DEFAULT_bedKp 690.34 + #define DEFAULT_bedKi 111.47 + #define DEFAULT_bedKd 1068.83 // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. #endif // PIDTEMPBED @@ -634,7 +645,7 @@ * Note: For Bowden Extruders make this large enough to allow load/unload. */ #define PREVENT_LENGTHY_EXTRUDE -#define EXTRUDE_MAXLENGTH 200 +#define EXTRUDE_MAXLENGTH 435 //=========================================================================== //======================== Thermal Runaway Protection ======================= @@ -723,7 +734,7 @@ #define X_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. #define Y_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. #define Z_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_PROBE_ENDSTOP_INVERTING false // Set to true to invert the logic of the probe. +#define Z_MIN_PROBE_ENDSTOP_INVERTING ENABLED(CR10V3_BLTOUCH) // Set to true to invert the logic of the probe. /** * Stepper Drivers @@ -743,15 +754,15 @@ * TMC5130, TMC5130_STANDALONE, TMC5160, TMC5160_STANDALONE * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'L6474', 'POWERSTEP01', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2160', 'TMC2160_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC2209', 'TMC2209_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE', 'TMC5160', 'TMC5160_STANDALONE'] */ -#define X_DRIVER_TYPE A4988 -#define Y_DRIVER_TYPE A4988 -#define Z_DRIVER_TYPE A4988 +#define X_DRIVER_TYPE TMC2208_STANDALONE +#define Y_DRIVER_TYPE TMC2208_STANDALONE +#define Z_DRIVER_TYPE TMC2208_STANDALONE //#define X2_DRIVER_TYPE A4988 //#define Y2_DRIVER_TYPE A4988 //#define Z2_DRIVER_TYPE A4988 //#define Z3_DRIVER_TYPE A4988 //#define Z4_DRIVER_TYPE A4988 -#define E0_DRIVER_TYPE A4988 +#define E0_DRIVER_TYPE TMC2208_STANDALONE //#define E1_DRIVER_TYPE A4988 //#define E2_DRIVER_TYPE A4988 //#define E3_DRIVER_TYPE A4988 @@ -805,15 +816,16 @@ * Default Axis Steps Per Unit (steps/mm) * Override with M92 * X, Y, Z, E0 [, E1[, E2...]] + * Updated E Steps to 382.14 for CR10-V3 Direct Drive */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 500 } +#define DEFAULT_AXIS_STEPS_PER_UNIT { 80.00, 80.00, 400.00, 382.14 } /** * Default Max Feed Rate (mm/s) * Override with M203 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 } +#define DEFAULT_MAX_FEEDRATE { 750, 750, 15, 75 } //#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 #if ENABLED(LIMITED_MAX_FR_EDITING) @@ -826,7 +838,7 @@ * Override with M201 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 } +#define DEFAULT_MAX_ACCELERATION { 2000, 2000, 100, 5000 } //#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 #if ENABLED(LIMITED_MAX_ACCEL_EDITING) @@ -841,9 +853,9 @@ * M204 R Retract Acceleration * M204 T Travel Acceleration */ -#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves +#define DEFAULT_ACCELERATION 800 // X, Y, Z and E acceleration for printing moves +#define DEFAULT_RETRACT_ACCELERATION 1000 // E acceleration for retracts +#define DEFAULT_TRAVEL_ACCELERATION 800 // X, Y, Z acceleration for travel (non printing) moves /** * Default Jerk limits (mm/s) @@ -853,13 +865,13 @@ * When changing speed and direction, if the difference is less than the * value set here, it may happen instantaneously. */ -//#define CLASSIC_JERK +#define CLASSIC_JERK // Fine for mendel-style machines #if ENABLED(CLASSIC_JERK) #define DEFAULT_XJERK 10.0 #define DEFAULT_YJERK 10.0 - #define DEFAULT_ZJERK 0.3 + #define DEFAULT_ZJERK 0.4 - //#define TRAVEL_EXTRA_XYJERK 0.0 // Additional jerk allowance for all travel moves + #define TRAVEL_EXTRA_XYJERK 5.0 // Additional jerk allowance for all travel moves //#define LIMITED_JERK_EDITING // Limit edit via M205 or LCD to DEFAULT_aJERK * 2 #if ENABLED(LIMITED_JERK_EDITING) @@ -877,7 +889,7 @@ * https://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html */ #if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.013 // (mm) Distance from real junction edge + #define JUNCTION_DEVIATION_MM 0.08 // (mm) Distance from real junction edge #define JD_HANDLE_SMALL_SEGMENTS // Use curvature estimation instead of just the junction angle // for small segments (< 1mm) with large junction angles (> 135°). #endif @@ -890,7 +902,7 @@ * * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained */ -//#define S_CURVE_ACCELERATION +#define S_CURVE_ACCELERATION //=========================================================================== //============================= Z Probe Options ============================= @@ -906,10 +918,13 @@ * The probe replaces the Z-MIN endstop and is used for Z homing. * (Automatically enables USE_PROBE_FOR_Z_HOMING.) */ -#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN +//#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN // Force the use of the probe for Z-axis homing //#define USE_PROBE_FOR_Z_HOMING +#if ENABLED(CR10V3_BLTOUCH) + #define USE_PROBE_FOR_Z_HOMING +#endif /** * Z_MIN_PROBE_PIN @@ -928,6 +943,10 @@ */ //#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +#if ENABLED(CR10V3_BLTOUCH) + #define Z_MIN_PROBE_PIN 19 +#endif + /** * Probe Type * @@ -963,7 +982,9 @@ /** * The BLTouch probe uses a Hall effect sensor and emulates a servo. */ -//#define BLTOUCH +#if ENABLED(CR10V3_BLTOUCH) + #define BLTOUCH +#endif /** * Touch-MI Probe by hotends.fr @@ -1055,17 +1076,17 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +#define NOZZLE_TO_PROBE_OFFSET { 47, 0, 0 } // Most probes should stay away from the edges of the bed, but // with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed (mm/min) between probes -#define XY_PROBE_FEEDRATE (133*60) +#define XY_PROBE_FEEDRATE (150*60) // Feedrate (mm/min) for the first approach when double-probing (MULTIPLE_PROBING == 2) -#define Z_PROBE_FEEDRATE_FAST (4*60) +#define Z_PROBE_FEEDRATE_FAST (6*60) // Feedrate (mm/min) for the "accurate" probe of each point #define Z_PROBE_FEEDRATE_SLOW (Z_PROBE_FEEDRATE_FAST / 2) @@ -1106,7 +1127,7 @@ * A total of 2 does fast/slow probes with a weighted average. * A total of 3 or more adds more slow probes, taking the average. */ -//#define MULTIPLE_PROBING 2 +#define MULTIPLE_PROBING 2 //#define EXTRA_PROBING 1 /** @@ -1126,16 +1147,18 @@ #define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow #define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points #define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes -//#define Z_AFTER_PROBING 5 // Z position after probing is done +#define Z_AFTER_PROBING 5 // Z position after probing is done #define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping // For M851 give a range for adjusting the Z probe offset -#define Z_PROBE_OFFSET_RANGE_MIN -20 -#define Z_PROBE_OFFSET_RANGE_MAX 20 +#define Z_PROBE_OFFSET_RANGE_MIN -9 +#define Z_PROBE_OFFSET_RANGE_MAX 9 // Enable the M48 repeatability test to test probe accuracy -//#define Z_MIN_PROBE_REPEATABILITY_TEST +#if ENABLED(CR10V3_BLTOUCH) + #define Z_MIN_PROBE_REPEATABILITY_TEST +#endif // Before deploy/stow pause for user confirmation //#define PAUSE_BEFORE_DEPLOY_STOW @@ -1191,13 +1214,14 @@ // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR false -#define INVERT_Y_DIR true -#define INVERT_Z_DIR false +#define INVERT_Y_DIR false +#define INVERT_Z_DIR true // @section extruder // For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR false +// Updated INVERT_E0_DIR for CR10-V3 Direct Drive +#define INVERT_E0_DIR true #define INVERT_E1_DIR false #define INVERT_E2_DIR false #define INVERT_E3_DIR false @@ -1218,7 +1242,7 @@ */ //#define Z_IDLE_HEIGHT Z_HOME_POS -//#define Z_HOMING_HEIGHT 4 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ... +#define Z_HOMING_HEIGHT 4 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ... // Be sure to have this much clearance over your Z_MAX_POS to prevent grinding. //#define Z_AFTER_HOMING 10 // (mm) Height to move to after homing Z @@ -1232,8 +1256,8 @@ // @section machine // The size of the printable area -#define X_BED_SIZE 200 -#define Y_BED_SIZE 200 +#define X_BED_SIZE 310 // Nozzle is at X0 when homed +#define Y_BED_SIZE 310 // Nozzle is at Y0 when homed // Travel limits (mm) after homing, corresponding to endstop positions. #define X_MIN_POS 0 @@ -1241,7 +1265,7 @@ #define Z_MIN_POS 0 #define X_MAX_POS X_BED_SIZE #define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 200 +#define Z_MAX_POS 400 // 410 /** * Software Endstops @@ -1269,7 +1293,7 @@ #endif #if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS) - //#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD + #define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD #endif /** @@ -1285,10 +1309,11 @@ * RAMPS-based boards use SERVO3_PIN for the first runout sensor. * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. */ -//#define FILAMENT_RUNOUT_SENSOR +#define FILAMENT_RUNOUT_SENSOR #if ENABLED(FILAMENT_RUNOUT_SENSOR) #define FIL_RUNOUT_ENABLED_DEFAULT true // Enable the sensor on startup. Override with M412 followed by M500. #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. + #define FIL_RUNOUT_PIN 2 // Creality CR10-S stock sensor #define FIL_RUNOUT_STATE LOW // Pin state indicating that filament is NOT present. #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. @@ -1337,7 +1362,7 @@ // After a runout is detected, continue printing this length of filament // before executing the runout script. Useful for a sensor at the end of // a feed tube. Requires 4 bytes SRAM per sensor, plus 4 bytes overhead. - //#define FILAMENT_RUNOUT_DISTANCE_MM 25 + #define FILAMENT_RUNOUT_DISTANCE_MM 5 #ifdef FILAMENT_RUNOUT_DISTANCE_MM // Enable this option to use an encoder disc that toggles the runout pin @@ -1387,7 +1412,9 @@ */ //#define AUTO_BED_LEVELING_3POINT //#define AUTO_BED_LEVELING_LINEAR -//#define AUTO_BED_LEVELING_BILINEAR +#if ENABLED(CR10V3_BLTOUCH) + #define AUTO_BED_LEVELING_BILINEAR +#endif //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING @@ -1396,7 +1423,9 @@ * these options to restore the prior leveling state or to always enable * leveling immediately after G28. */ -//#define RESTORE_LEVELING_AFTER_G28 +#if ENABLED(CR10V3_BLTOUCH) + #define RESTORE_LEVELING_AFTER_G28 +#endif //#define ENABLE_LEVELING_AFTER_G28 /** @@ -1433,12 +1462,12 @@ // split up moves into short segments like a Delta. This follows the // contours of the bed more closely than edge-to-edge straight moves. #define SEGMENT_LEVELED_MOVES - #define LEVELED_SEGMENT_LENGTH 5.0 // (mm) Length of all segments (except the last one) + #define LEVELED_SEGMENT_LENGTH 20.0 // (mm) Length of all segments (except the last one) /** * Enable the G26 Mesh Validation Pattern tool. */ - //#define G26_MESH_VALIDATION + #define G26_MESH_VALIDATION // Enable G26 mesh validation #if ENABLED(G26_MESH_VALIDATION) #define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle. #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for G26. @@ -1454,7 +1483,7 @@ #if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR) // Set the number of grid points per dimension. - #define GRID_MAX_POINTS_X 3 + #define GRID_MAX_POINTS_X 5 #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X // Probe along the Y axis, advancing X after each column @@ -1484,7 +1513,7 @@ //========================= Unified Bed Leveling ============================ //=========================================================================== - //#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh + #define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh #define MESH_INSET 1 // Set Mesh bounds as an inset region of the bed #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. @@ -1495,7 +1524,7 @@ #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 - //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used + #define UBL_Z_RAISE_WHEN_OFF_MESH 0 // When the nozzle is off the mesh, this value is used // as the Z-Height correction value. //#define UBL_MESH_WIZARD // Run several commands in a row to get a complete mesh @@ -1506,9 +1535,9 @@ //=================================== Mesh ================================== //=========================================================================== - #define MESH_INSET 10 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 3 // Don't use more than 7 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X + #define MESH_INSET 30 // Set Mesh bounds as an inset region of the bed + //#define GRID_MAX_POINTS_X 3 // Don't use more than 7 points per axis, implementation limited. + //#define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS @@ -1518,12 +1547,14 @@ * Add a bed leveling sub-menu for ABL or MBL. * Include a guided procedure if manual probing is enabled. */ -//#define LCD_BED_LEVELING +#if ENABLED(CR10V3_BLTOUCH) + #define LCD_BED_LEVELING +#endif #if ENABLED(LCD_BED_LEVELING) #define MESH_EDIT_Z_STEP 0.025 // (mm) Step size while manually probing Z axis. #define LCD_PROBE_Z_RANGE 4 // (mm) Z Range centered on Z_MIN_POS for LCD Z adjustment - //#define MESH_EDIT_MENU // Add a menu to edit mesh points + #define MESH_EDIT_MENU // Add a menu to edit mesh points #endif // Add a menu item to move between bed corners for manual bed adjustment @@ -1574,8 +1605,8 @@ // Manually set the home position. Leave these undefined for automatic settings. // For DELTA this is the top-center of the Cartesian print volume. -//#define MANUAL_X_HOME_POS 0 -//#define MANUAL_Y_HOME_POS 0 +//#define MANUAL_X_HOME_POS X_MIN_POS +//#define MANUAL_Y_HOME_POS Y_MIN_POS //#define MANUAL_Z_HOME_POS 0 // Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area. @@ -1587,7 +1618,9 @@ // - Move the Z probe (or nozzle) to a defined XY point before Z Homing. // - Prevent Z homing when the Z probe is outside bed area. // -//#define Z_SAFE_HOMING +#if ENABLED(CR10V3_BLTOUCH) + #define Z_SAFE_HOMING +#endif #if ENABLED(Z_SAFE_HOMING) #define Z_SAFE_HOMING_X_POINT X_CENTER // X point for Z homing @@ -1595,7 +1628,7 @@ #endif // Homing speeds (mm/min) -#define HOMING_FEEDRATE_MM_M { (50*60), (50*60), (4*60) } +#define HOMING_FEEDRATE_MM_M { (50*60), (50*60), (6*60) } // Validate that endstops are triggered on homing moves #define VALIDATE_HOMING_ENDSTOPS @@ -1672,7 +1705,7 @@ * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) */ -//#define EEPROM_SETTINGS // Persistent storage with M500 and M501 +#define EEPROM_SETTINGS // Persistent storage with M500 and M501 //#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. #define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load @@ -1706,14 +1739,14 @@ // Preheat Constants - Up to 5 are supported without changes // #define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 180 -#define PREHEAT_1_TEMP_BED 70 +#define PREHEAT_1_TEMP_HOTEND 205 +#define PREHEAT_1_TEMP_BED 60 #define PREHEAT_1_TEMP_CHAMBER 35 #define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 -#define PREHEAT_2_LABEL "ABS" -#define PREHEAT_2_TEMP_HOTEND 240 -#define PREHEAT_2_TEMP_BED 110 +#define PREHEAT_2_LABEL "PETG" +#define PREHEAT_2_TEMP_HOTEND 230 +#define PREHEAT_2_TEMP_BED 80 #define PREHEAT_2_TEMP_CHAMBER 35 #define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 @@ -1728,15 +1761,15 @@ * P1 Raise the nozzle always to Z-park height. * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. */ -//#define NOZZLE_PARK_FEATURE +#define NOZZLE_PARK_FEATURE #if ENABLED(NOZZLE_PARK_FEATURE) // Specify a park position as { X, Y, Z_raise } - #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 } + #define NOZZLE_PARK_POINT { (X_MIN_POS + 5), (Y_MAX_POS - 5), 10 } //#define NOZZLE_PARK_X_ONLY // X move only is required to park //#define NOZZLE_PARK_Y_ONLY // Y move only is required to park #define NOZZLE_PARK_Z_RAISE_MIN 2 // (mm) Always raise Z by at least this distance - #define NOZZLE_PARK_XY_FEEDRATE 100 // (mm/s) X and Y axes feedrate (also used for delta Z axis) + #define NOZZLE_PARK_XY_FEEDRATE 80 // (mm/s) X and Y axes feedrate (also used for delta Z axis) #define NOZZLE_PARK_Z_FEEDRATE 5 // (mm/s) Z axis feedrate (not used for delta printers) #endif @@ -1845,7 +1878,7 @@ * * View the current statistics with M78. */ -//#define PRINTCOUNTER +#define PRINTCOUNTER #if ENABLED(PRINTCOUNTER) #define PRINTCOUNTER_SAVE_INTERVAL 60 // (minutes) EEPROM save interval during print #endif @@ -1921,7 +1954,7 @@ * * :['JAPANESE', 'WESTERN', 'CYRILLIC'] */ -#define DISPLAY_CHARSET_HD44780 JAPANESE +#define DISPLAY_CHARSET_HD44780 WESTERN /** * Info Screen Style (0:Classic, 1:Průša) @@ -1936,7 +1969,7 @@ * SD Card support is disabled by default. If your controller has an SD slot, * you must uncomment the following option or it won't work. */ -//#define SDSUPPORT +#define SDSUPPORT /** * SD CARD: ENABLE CRC @@ -1966,7 +1999,7 @@ // Use this option to override the number of step signals required to // move between next/prev menu items. // -//#define ENCODER_STEPS_PER_MENU_ITEM 1 +#define ENCODER_STEPS_PER_MENU_ITEM 1 /** * Encoder Direction Options @@ -2006,7 +2039,7 @@ // // Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. // -//#define INDIVIDUAL_AXIS_HOMING_MENU +#define INDIVIDUAL_AXIS_HOMING_MENU // // SPEAKER/BUZZER @@ -2195,7 +2228,7 @@ // RepRapDiscount FULL GRAPHIC Smart Controller // https://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller // -//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER +#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER // // K.3D Full Graphic Smart Controller diff --git a/config/examples/Creality/CR-10 V3/Configuration_adv.h b/config/examples/Creality/CR-10 V3/Configuration_adv.h index 5335fa012a..ee49bf03b1 100644 --- a/config/examples/Creality/CR-10 V3/Configuration_adv.h +++ b/config/examples/Creality/CR-10 V3/Configuration_adv.h @@ -1,6 +1,6 @@ /** * Marlin 3D Printer Firmware - * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * Copyright (c) 2021 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * * Based on Sprinter and grbl. * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Creality/CR-10 V3" + /** * Configuration_adv.h * @@ -238,12 +240,12 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 60 // Seconds + #define THERMAL_PROTECTION_HYSTERESIS 10 // Degrees Celsius - //#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops + #define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops #if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP) - //#define NO_FAN_SLOWING_IN_PID_TUNING // Don't slow fan speed during M303 + #define NO_FAN_SLOWING_IN_PID_TUNING // Don't slow fan speed during M303 #endif /** @@ -258,7 +260,7 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 20 // Seconds + #define WATCH_TEMP_PERIOD 50 // Seconds #define WATCH_TEMP_INCREASE 2 // Degrees Celsius #endif @@ -266,13 +268,13 @@ * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_BED_PERIOD 50 // Seconds #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds + #define WATCH_BED_TEMP_PERIOD 180 // Seconds #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius #endif @@ -479,7 +481,7 @@ // When first starting the main fan, run it at full speed for the // given number of milliseconds. This gets the fan spinning reliably // before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) -//#define FAN_KICKSTART_TIME 100 +#define FAN_KICKSTART_TIME 100 // Some coolers may require a non-zero "off" state. //#define FAN_OFF_PWM 1 @@ -741,7 +743,7 @@ //#define HOMING_BACKOFF_POST_MM { 2, 2, 2 } // (mm) Backoff from endstops after homing -//#define QUICK_HOME // If G28 contains XY do a diagonal move first +#define QUICK_HOME // If G28 contains XY do a diagonal move first //#define HOME_Y_BEFORE_X // If G28 contains XY home Y before X //#define HOME_Z_FIRST // Home Z first. Requires a Z-MIN endstop (not a probe). //#define CODEPENDENT_XY_HOMING // If X/Y can't home without homing Y/X first @@ -792,7 +794,7 @@ * differs, a mode set eeprom write will be completed at initialization. * Use the option below to force an eeprom write to a V3.1 probe regardless. */ - //#define BLTOUCH_SET_5V_MODE + #define BLTOUCH_SET_5V_MODE /** * Safety: Activate if connecting a probe with an unknown voltage mode. @@ -867,7 +869,7 @@ // On a 300mm bed a 5% grade would give a misalignment of ~1.5cm #define G34_MAX_GRADE 5 // (%) Maximum incline that G34 will handle - #define Z_STEPPER_ALIGN_ITERATIONS 5 // Number of iterations to apply during alignment + #define Z_STEPPER_ALIGN_ITERATIONS 3 // Number of iterations to apply during alignment #define Z_STEPPER_ALIGN_ACC 0.02 // Stop iterating early if the accuracy is better than this #define RESTORE_LEVELING_AFTER_G34 // Restore leveling after G34 is done? // After G34, re-home Z (G28 Z) or just calculate it from the last probe heights? @@ -1175,7 +1177,7 @@ #endif // Include a page of printer information in the LCD Main Menu - //#define LCD_INFO_MENU + #define LCD_INFO_MENU #if ENABLED(LCD_INFO_MENU) //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages #endif @@ -1219,7 +1221,7 @@ #if HAS_DISPLAY // The timeout (in ms) to return to the status screen from sub-menus - //#define LCD_TIMEOUT_TO_STATUS 15000 + #define LCD_TIMEOUT_TO_STATUS 15000 #if ENABLED(SHOW_BOOTSCREEN) #define BOOTSCREEN_TIMEOUT 4000 // (ms) Total Duration to display the boot screen(s) @@ -1229,13 +1231,13 @@ #endif // Scroll a longer status message into view - //#define STATUS_MESSAGE_SCROLLING + #define STATUS_MESSAGE_SCROLLING // On the Info Screen, display XY with one decimal place when possible - //#define LCD_DECIMAL_SMALL_XY + #define LCD_DECIMAL_SMALL_XY // Add an 'M73' G-code to set the current percentage - //#define LCD_SET_PROGRESS_MANUALLY + #define LCD_SET_PROGRESS_MANUALLY // Show the E position (filament used) during printing //#define LCD_SHOW_E_TOTAL @@ -1253,7 +1255,7 @@ #endif #if EITHER(HAS_MARLINUI_HD44780, IS_TFTGLCD_PANEL) - //#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing + #define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing #if ENABLED(LCD_PROGRESS_BAR) #define PROGRESS_BAR_BAR_TIME 2000 // (ms) Amount of time to show the bar #define PROGRESS_BAR_MSG_TIME 3000 // (ms) Amount of time to show the status message @@ -1315,7 +1317,7 @@ * an option on the LCD screen to continue the print from the last-known * point in the file. */ - //#define POWER_LOSS_RECOVERY + #define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) //#define BACKUP_POWER_SUPPLY // Backup power / UPS to move the steppers on power loss @@ -1361,15 +1363,15 @@ * - SDSORT_CACHE_NAMES will retain the sorted file listing in RAM. (Expensive!) * - SDSORT_DYNAMIC_RAM only uses RAM when the SD menu is visible. (Use with caution!) */ - //#define SDCARD_SORT_ALPHA + #define SDCARD_SORT_ALPHA // SD Card Sorting options #if ENABLED(SDCARD_SORT_ALPHA) #define SDSORT_LIMIT 40 // Maximum number of sorted items (10-256). Costs 27 bytes each. #define FOLDER_SORTING -1 // -1=above 0=none 1=below #define SDSORT_GCODE false // Allow turning sorting on/off with LCD and M34 G-code. - #define SDSORT_USES_RAM false // Pre-allocate a static array for faster pre-sorting. - #define SDSORT_USES_STACK false // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.) + #define SDSORT_USES_RAM true // Pre-allocate a static array for faster pre-sorting. + #define SDSORT_USES_STACK true // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.) #define SDSORT_CACHE_NAMES false // Keep sorted items in RAM longer for speedy performance. Most expensive option. #define SDSORT_DYNAMIC_RAM false // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use! #define SDSORT_CACHE_VFATS 2 // Maximum number of 13-byte VFAT entries to use for sorting. @@ -1381,10 +1383,10 @@ //#define UTF_FILENAME_SUPPORT // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT + #define LONG_FILENAME_HOST_SUPPORT // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES + #define SCROLL_LONG_FILENAMES // Leave the heaters on after Stop Print (not recommended!) //#define SD_ABORT_NO_COOLDOWN @@ -1406,7 +1408,7 @@ /** * Auto-report SdCard status with M27 S */ - //#define AUTO_REPORT_SD_STATUS + #define AUTO_REPORT_SD_STATUS /** * Support for USB thumb drives using an Arduino USB Host Shield or @@ -1512,7 +1514,7 @@ */ #if HAS_MARLINUI_U8GLIB // Show SD percentage next to the progress bar - //#define DOGM_SD_PERCENT + #define DOGM_SD_PERCENT // Save many cycles by drawing a hollow frame or no frame on the Info Screen //#define XYZ_NO_FRAME @@ -1790,18 +1792,20 @@ * * Warning: Does not respect endstops! */ -//#define BABYSTEPPING +#if ENABLED(CR10V3_BLTOUCH) + #define BABYSTEPPING +#endif #if ENABLED(BABYSTEPPING) //#define INTEGRATED_BABYSTEPPING // EXPERIMENTAL integration of babystepping into the Stepper ISR //#define BABYSTEP_WITHOUT_HOMING - //#define BABYSTEP_ALWAYS_AVAILABLE // Allow babystepping at all times (not just during movement). + #define BABYSTEP_ALWAYS_AVAILABLE // Allow babystepping at all times (not just during movement). //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way //#define BABYSTEP_MILLIMETER_UNITS // Specify BABYSTEP_MULTIPLICATOR_(XY|Z) in mm instead of micro-steps - #define BABYSTEP_MULTIPLICATOR_Z 1 // (steps or mm) Steps or millimeter distance for each Z babystep + #define BABYSTEP_MULTIPLICATOR_Z 4 // (steps or mm) Steps or millimeter distance for each Z babystep #define BABYSTEP_MULTIPLICATOR_XY 1 // (steps or mm) Steps or millimeter distance for each XY babystep - //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. + #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. // Note: Extra time may be added to mitigate controller latency. @@ -1813,10 +1817,12 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 - //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping + #if ENABLED(CR10V3_BLTOUCH) + #define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping + #endif #if ENABLED(BABYSTEP_ZPROBE_OFFSET) //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - //#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor + #define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif @@ -1902,7 +1908,7 @@ * Repeatedly attempt G29 leveling until it succeeds. * Stop after G29_MAX_RETRIES attempts. */ -//#define G29_RETRY_AND_RECOVER +#define G29_RETRY_AND_RECOVER #if ENABLED(G29_RETRY_AND_RECOVER) #define G29_MAX_RETRIES 3 #define G29_HALT_ON_FAILURE @@ -1986,10 +1992,10 @@ #if ENABLED(ARC_SUPPORT) #define MM_PER_ARC_SEGMENT 1 // (mm) Length (or minimum length) of each arc segment //#define ARC_SEGMENTS_PER_R 1 // Max segment length, MM_PER = Min - #define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle + #define MIN_ARC_SEGMENTS 16 // Minimum number of segments in a complete circle // 24 //#define ARC_SEGMENTS_PER_SEC 50 // Use feedrate to choose segment length (with MM_PER_ARC_SEGMENT as the minimum) #define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections - //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles + #define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles // commenté //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes //#define SF_ARC_FIX // Enable only if using SkeinForge with "Arc Point" fillet procedure #endif @@ -2141,7 +2147,7 @@ * Currently handles M108, M112, M410, M876 * NOTE: Not yet implemented for all platforms. */ -//#define EMERGENCY_PARSER +#define EMERGENCY_PARSER /** * Realtime Reporting (requires EMERGENCY_PARSER) @@ -2170,7 +2176,7 @@ //#define NO_TIMEOUTS 1000 // Milliseconds // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. -//#define ADVANCED_OK +#define ADVANCED_OK // Printrun may have trouble receiving long strings all at once. // This option inserts short delays between lines of serial output. @@ -2311,49 +2317,49 @@ * * Enable PARK_HEAD_ON_PAUSE to add the G-code M125 Pause and Park. */ -//#define ADVANCED_PAUSE_FEATURE +#define ADVANCED_PAUSE_FEATURE #if ENABLED(ADVANCED_PAUSE_FEATURE) #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. - #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. + #define PAUSE_PARK_RETRACT_LENGTH 4 // (mm) Initial retract. // This short retract is done immediately, before parking the nozzle. - #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast. + #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 40 // (mm/s) Unload filament feedrate. This can be pretty fast. #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload. + #define FILAMENT_CHANGE_UNLOAD_LENGTH 435 // (mm) The length of filament for a complete unload. // For Bowden, the full length of the tube and nozzle. // For direct drive, the full length of the nozzle. // Set to 0 for manual unloading. #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE 6 // (mm/s) Slow move when starting load. #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 0 // (mm) Slow length, to allow time to insert material. // 0 to disable start loading and skip to fast load only - #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast. - #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle. + #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 30 // (mm/s) Load filament feedrate. This can be pretty fast. + #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 15 // (mm/s^2) Lower acceleration may allow a faster feedrate. + #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 430 // (mm) Load length of filament, from extruder gear to nozzle. // For Bowden, the full length of the tube and nozzle. // For direct drive, the full length of the nozzle. //#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted. #define ADVANCED_PAUSE_PURGE_FEEDRATE 3 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate. - #define ADVANCED_PAUSE_PURGE_LENGTH 50 // (mm) Length to extrude after loading. + #define ADVANCED_PAUSE_PURGE_LENGTH 20 // (mm) Length to extrude after loading. // Set to 0 for manual extrusion. // Filament can be extruded repeatedly from the Filament Change menu // until extrusion is consistent, and to purge old filament. #define ADVANCED_PAUSE_RESUME_PRIME 0 // (mm) Extra distance to prime nozzle after returning from park. - //#define ADVANCED_PAUSE_FANS_PAUSE // Turn off print-cooling fans while the machine is paused. + #define ADVANCED_PAUSE_FANS_PAUSE // Turn off print-cooling fans while the machine is paused. // Filament Unload does a Retract, Delay, and Purge first: - #define FILAMENT_UNLOAD_PURGE_RETRACT 13 // (mm) Unload initial retract length. + #define FILAMENT_UNLOAD_PURGE_RETRACT 4 // (mm) Unload initial retract length. #define FILAMENT_UNLOAD_PURGE_DELAY 5000 // (ms) Delay for the filament to cool after retract. - #define FILAMENT_UNLOAD_PURGE_LENGTH 8 // (mm) An unretract is done, then this length is purged. + #define FILAMENT_UNLOAD_PURGE_LENGTH 0 // (mm) An unretract is done, then this length is purged. #define FILAMENT_UNLOAD_PURGE_FEEDRATE 25 // (mm/s) feedrate to purge before unload #define PAUSE_PARK_NOZZLE_TIMEOUT 45 // (seconds) Time limit before the nozzle is turned off for safety. - #define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed. + #define FILAMENT_CHANGE_ALERT_BEEPS 2 // Number of alert beeps to play when a response is needed. #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change. - //#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. - //#define HOME_BEFORE_FILAMENT_CHANGE // If needed, home before parking for filament change + #define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. + #define HOME_BEFORE_FILAMENT_CHANGE // If needed, home before parking for filament change - //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. - //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) + #define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. + #define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) #endif // @section tmc @@ -2493,7 +2499,7 @@ #define INTERPOLATE true #if AXIS_IS_TMC(X) - #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. + #define X_CURRENT 730 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for sensorless homing #define X_MICROSTEPS 16 // 0..256 #define X_RSENSE 0.11 @@ -2511,7 +2517,7 @@ #endif #if AXIS_IS_TMC(Y) - #define Y_CURRENT 800 + #define Y_CURRENT 730 #define Y_CURRENT_HOME Y_CURRENT #define Y_MICROSTEPS 16 #define Y_RSENSE 0.11 @@ -2529,7 +2535,7 @@ #endif #if AXIS_IS_TMC(Z) - #define Z_CURRENT 800 + #define Z_CURRENT 850 #define Z_CURRENT_HOME Z_CURRENT #define Z_MICROSTEPS 16 #define Z_RSENSE 0.11 @@ -2538,7 +2544,7 @@ #endif #if AXIS_IS_TMC(Z2) - #define Z2_CURRENT 800 + #define Z2_CURRENT 850 #define Z2_CURRENT_HOME Z2_CURRENT #define Z2_MICROSTEPS Z_MICROSTEPS #define Z2_RSENSE 0.11 @@ -2565,7 +2571,7 @@ #endif #if AXIS_IS_TMC(E0) - #define E0_CURRENT 800 + #define E0_CURRENT 730 #define E0_MICROSTEPS 16 #define E0_RSENSE 0.11 #define E0_CHAIN_POS -1 @@ -2573,7 +2579,7 @@ #endif #if AXIS_IS_TMC(E1) - #define E1_CURRENT 800 + #define E1_CURRENT 730 #define E1_MICROSTEPS E0_MICROSTEPS #define E1_RSENSE 0.11 #define E1_CHAIN_POS -1 @@ -2702,7 +2708,7 @@ */ #define STEALTHCHOP_XY #define STEALTHCHOP_Z - #define STEALTHCHOP_E + //#define STEALTHCHOP_E /** * Optimize spreadCycle chopper parameters by using predefined parameter sets @@ -2719,7 +2725,7 @@ * Define your own with: * { , , hysteresis_start[1..8] } */ - #define CHOPPER_TIMING CHOPPER_DEFAULT_12V // All axes (override below) + #define CHOPPER_TIMING CHOPPER_DEFAULT_24V // All axes (override below) //#define CHOPPER_TIMING_X CHOPPER_TIMING // For X Axes (override below) //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X //#define CHOPPER_TIMING_Y CHOPPER_TIMING // For Y Axes (override below) @@ -2765,15 +2771,15 @@ */ //#define HYBRID_THRESHOLD - #define X_HYBRID_THRESHOLD 100 // [mm/s] + #define X_HYBRID_THRESHOLD 150 // [mm/s] #define X2_HYBRID_THRESHOLD 100 - #define Y_HYBRID_THRESHOLD 100 + #define Y_HYBRID_THRESHOLD 150 #define Y2_HYBRID_THRESHOLD 100 - #define Z_HYBRID_THRESHOLD 3 - #define Z2_HYBRID_THRESHOLD 3 + #define Z_HYBRID_THRESHOLD 10 + #define Z2_HYBRID_THRESHOLD 10 #define Z3_HYBRID_THRESHOLD 3 #define Z4_HYBRID_THRESHOLD 3 - #define E0_HYBRID_THRESHOLD 30 + #define E0_HYBRID_THRESHOLD 50 #define E1_HYBRID_THRESHOLD 30 #define E2_HYBRID_THRESHOLD 30 #define E3_HYBRID_THRESHOLD 30 @@ -2839,7 +2845,7 @@ * Beta feature! * Create a 50/50 square wave step pulse optimal for stepper drivers. */ - //#define SQUARE_WAVE_STEPPING + #define SQUARE_WAVE_STEPPING /** * Enable M122 debugging command for TMC stepper drivers. @@ -3358,11 +3364,14 @@ */ //#define FILAMENT_WIDTH_SENSOR +#define DEFAULT_STDDEV_FILAMENT_DIA 0.05 // Typical estimate for cheap filament +//#define DEFAULT_STDDEV_FILAMENT_DIA 0.02 // Typical advertised for higher quality filament + #if ENABLED(FILAMENT_WIDTH_SENSOR) #define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor. :[0,1,2,3,4] #define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber - #define FILWIDTH_ERROR_MARGIN 1.0 // (mm) If a measurement differs too much from nominal width ignore it + #define FILWIDTH_ERROR_MARGIN (DEFAULT_STDDEV_FILAMENT_DIA*4) // (mm) If a measurement differs too much from nominal width ignore it #define MAX_MEASUREMENT_DELAY 20 // (bytes) Buffer size for stored measurements (1 byte per cm). Must be larger than MEASUREMENT_DELAY_CM. #define DEFAULT_MEASURED_FILAMENT_DIA DEFAULT_NOMINAL_FILAMENT_DIA // Set measured to nominal initially @@ -3471,10 +3480,10 @@ * - M206 and M428 are disabled. * - G92 will revert to its behavior from Marlin 1.0. */ -//#define NO_WORKSPACE_OFFSETS +#define NO_WORKSPACE_OFFSETS // Extra options for the M114 "Current Position" report -//#define M114_DETAIL // Use 'M114` for details to check planner calculations +#define M114_DETAIL // Use 'M114` for details to check planner calculations //#define M114_REALTIME // Real current position based on forward kinematics //#define M114_LEGACY // M114 used to synchronize on every call. Enable if needed. @@ -3650,9 +3659,9 @@ * Host Prompt Support enables Marlin to use the host for user prompts so * filament runout and other processes can be managed from the host side. */ -//#define HOST_ACTION_COMMANDS +#define HOST_ACTION_COMMANDS #if ENABLED(HOST_ACTION_COMMANDS) - //#define HOST_PROMPT_SUPPORT + #define HOST_PROMPT_SUPPORT //#define HOST_START_MENU_ITEM // Add a menu item that tells the host to start #endif @@ -3661,10 +3670,7 @@ * * Implement M486 to allow Marlin to skip objects */ -//#define CANCEL_OBJECTS -#if ENABLED(CANCEL_OBJECTS) - #define CANCEL_OBJECTS_REPORTING // Emit the current object as a status message -#endif +#define CANCEL_OBJECTS /** * I2C position encoders for closed loop control. diff --git a/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 2.0/Configuration.h b/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 2.0/Configuration.h index 78c2dc9160..36c82cf61c 100644 --- a/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 2.0/Configuration.h +++ b/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 2.0/Configuration.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Creality/CR-10/BigTreeTech SKR Mini E3 2.0" + /** * Configuration.h * @@ -69,7 +71,7 @@ // @section info // Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes. +#define STRING_CONFIG_H_AUTHOR "(Gamester17)" // Who made the changes. //#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) /** @@ -102,14 +104,14 @@ * * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] */ -#define SERIAL_PORT 0 +#define SERIAL_PORT 2 /** * Select a secondary serial port on the board to use for communication with the host. * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] */ -//#define SERIAL_PORT_2 -1 +#define SERIAL_PORT_2 -1 /** * Select a third serial port on the board to use for communication with the host. @@ -127,18 +129,18 @@ * * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ -#define BAUDRATE 250000 +#define BAUDRATE 115200 // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH // Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_RAMPS_14_EFB + #define MOTHERBOARD BOARD_BTT_SKR_MINI_E3_V2_0 #endif // Name displayed in the LCD "Ready" message and Info menu -//#define CUSTOM_MACHINE_NAME "3D Printer" +#define CUSTOM_MACHINE_NAME "CR-10" // Printer's unique ID, used by some programs to differentiate between machines. // Choose your own or use a service like https://www.uuidgenerator.net/version4 @@ -424,7 +426,7 @@ #define TEMP_SENSOR_5 0 #define TEMP_SENSOR_6 0 #define TEMP_SENSOR_7 0 -#define TEMP_SENSOR_BED 0 +#define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 #define TEMP_SENSOR_COOLER 0 @@ -480,7 +482,7 @@ #define HEATER_5_MAXTEMP 275 #define HEATER_6_MAXTEMP 275 #define HEATER_7_MAXTEMP 275 -#define BED_MAXTEMP 150 +#define BED_MAXTEMP 125 #define CHAMBER_MAXTEMP 60 /** @@ -510,16 +512,17 @@ //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) // Set/get with gcode: M301 E[extruder number, 0-2] + // Creality CR-10 #if ENABLED(PID_PARAMS_PER_HOTEND) // Specify between 1 and HOTENDS values per array. // If fewer than EXTRUDER values are provided, the last element will be repeated. - #define DEFAULT_Kp_LIST { 22.20, 22.20 } - #define DEFAULT_Ki_LIST { 1.08, 1.08 } - #define DEFAULT_Kd_LIST { 114.00, 114.00 } + #define DEFAULT_Kp_LIST { 21.73, 21.73 } + #define DEFAULT_Ki_LIST { 1.54, 1.54 } + #define DEFAULT_Kd_LIST { 76.55, 76.55 } #else - #define DEFAULT_Kp 22.20 - #define DEFAULT_Ki 1.08 - #define DEFAULT_Kd 114.00 + #define DEFAULT_Kp 21.73 + #define DEFAULT_Ki 1.54 + #define DEFAULT_Kd 76.55 #endif #endif // PIDTEMP @@ -556,8 +559,6 @@ //#define MIN_BED_POWER 0 //#define PID_BED_DEBUG // Sends debug data to the serial port. - // 120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - // from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) #define DEFAULT_bedKp 10.00 #define DEFAULT_bedKi .023 #define DEFAULT_bedKd 305.4 @@ -634,7 +635,7 @@ * Note: For Bowden Extruders make this large enough to allow load/unload. */ #define PREVENT_LENGTHY_EXTRUDE -#define EXTRUDE_MAXLENGTH 200 +#define EXTRUDE_MAXLENGTH 1000 //=========================================================================== //======================== Thermal Runaway Protection ======================= @@ -743,15 +744,15 @@ * TMC5130, TMC5130_STANDALONE, TMC5160, TMC5160_STANDALONE * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'L6474', 'POWERSTEP01', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2160', 'TMC2160_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC2209', 'TMC2209_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE', 'TMC5160', 'TMC5160_STANDALONE'] */ -#define X_DRIVER_TYPE A4988 -#define Y_DRIVER_TYPE A4988 -#define Z_DRIVER_TYPE A4988 +#define X_DRIVER_TYPE TMC2209 +#define Y_DRIVER_TYPE TMC2209 +#define Z_DRIVER_TYPE TMC2209 //#define X2_DRIVER_TYPE A4988 //#define Y2_DRIVER_TYPE A4988 //#define Z2_DRIVER_TYPE A4988 //#define Z3_DRIVER_TYPE A4988 //#define Z4_DRIVER_TYPE A4988 -#define E0_DRIVER_TYPE A4988 +#define E0_DRIVER_TYPE TMC2209 //#define E1_DRIVER_TYPE A4988 //#define E2_DRIVER_TYPE A4988 //#define E3_DRIVER_TYPE A4988 @@ -806,14 +807,14 @@ * Override with M92 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 500 } +#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 93 } /** * Default Max Feed Rate (mm/s) * Override with M203 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 } +#define DEFAULT_MAX_FEEDRATE { 500, 500, 5, 25 } //#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 #if ENABLED(LIMITED_MAX_FR_EDITING) @@ -826,7 +827,7 @@ * Override with M201 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 } +#define DEFAULT_MAX_ACCELERATION { 500, 500, 100, 5000 } //#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 #if ENABLED(LIMITED_MAX_ACCEL_EDITING) @@ -841,9 +842,9 @@ * M204 R Retract Acceleration * M204 T Travel Acceleration */ -#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves +#define DEFAULT_ACCELERATION 500 // X, Y, Z and E acceleration for printing moves +#define DEFAULT_RETRACT_ACCELERATION 500 // E acceleration for retracts +#define DEFAULT_TRAVEL_ACCELERATION 500 // X, Y, Z acceleration for travel (non printing) moves /** * Default Jerk limits (mm/s) @@ -877,7 +878,7 @@ * https://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html */ #if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.013 // (mm) Distance from real junction edge + #define JUNCTION_DEVIATION_MM 0.08 // (mm) Distance from real junction edge #define JD_HANDLE_SMALL_SEGMENTS // Use curvature estimation instead of just the junction angle // for small segments (< 1mm) with large junction angles (> 135°). #endif @@ -890,7 +891,7 @@ * * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained */ -//#define S_CURVE_ACCELERATION +#define S_CURVE_ACCELERATION //=========================================================================== //============================= Z Probe Options ============================= @@ -1190,14 +1191,14 @@ // @section machine // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR false +#define INVERT_X_DIR true #define INVERT_Y_DIR true #define INVERT_Z_DIR false // @section extruder // For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR false +#define INVERT_E0_DIR true #define INVERT_E1_DIR false #define INVERT_E2_DIR false #define INVERT_E3_DIR false @@ -1232,8 +1233,8 @@ // @section machine // The size of the printable area -#define X_BED_SIZE 200 -#define Y_BED_SIZE 200 +#define X_BED_SIZE 300 +#define Y_BED_SIZE 300 // Travel limits (mm) after homing, corresponding to endstop positions. #define X_MIN_POS 0 @@ -1241,7 +1242,7 @@ #define Z_MIN_POS 0 #define X_MAX_POS X_BED_SIZE #define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 200 +#define Z_MAX_POS 400 /** * Software Endstops @@ -1389,7 +1390,7 @@ //#define AUTO_BED_LEVELING_LINEAR //#define AUTO_BED_LEVELING_BILINEAR //#define AUTO_BED_LEVELING_UBL -//#define MESH_BED_LEVELING +#define MESH_BED_LEVELING /** * Normally G28 leaves leveling disabled on completion. Enable one of @@ -1454,7 +1455,7 @@ #if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR) // Set the number of grid points per dimension. - #define GRID_MAX_POINTS_X 3 + #define GRID_MAX_POINTS_X 5 #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X // Probe along the Y axis, advancing X after each column @@ -1464,7 +1465,7 @@ // Beyond the probed grid, continue the implied tilt? // Default is to maintain the height of the nearest edge. - //#define EXTRAPOLATE_BEYOND_GRID + #define EXTRAPOLATE_BEYOND_GRID // // Experimental Subdivision of the grid by Catmull-Rom method. @@ -1518,16 +1519,16 @@ * Add a bed leveling sub-menu for ABL or MBL. * Include a guided procedure if manual probing is enabled. */ -//#define LCD_BED_LEVELING +#define LCD_BED_LEVELING #if ENABLED(LCD_BED_LEVELING) #define MESH_EDIT_Z_STEP 0.025 // (mm) Step size while manually probing Z axis. #define LCD_PROBE_Z_RANGE 4 // (mm) Z Range centered on Z_MIN_POS for LCD Z adjustment - //#define MESH_EDIT_MENU // Add a menu to edit mesh points + #define MESH_EDIT_MENU // Add a menu to edit mesh points #endif // Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS +#define LEVEL_BED_CORNERS #if ENABLED(LEVEL_BED_CORNERS) #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets @@ -1672,12 +1673,12 @@ * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) */ -//#define EEPROM_SETTINGS // Persistent storage with M500 and M501 +#define EEPROM_SETTINGS // Persistent storage with M500 and M501 //#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. #define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load #if ENABLED(EEPROM_SETTINGS) - //#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. + #define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. #endif // @@ -1706,16 +1707,28 @@ // Preheat Constants - Up to 5 are supported without changes // #define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 180 -#define PREHEAT_1_TEMP_BED 70 +#define PREHEAT_1_TEMP_HOTEND 185 +#define PREHEAT_1_TEMP_BED 45 #define PREHEAT_1_TEMP_CHAMBER 35 -#define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 +#define PREHEAT_1_FAN_SPEED 255 // Value from 0 to 255 #define PREHEAT_2_LABEL "ABS" #define PREHEAT_2_TEMP_HOTEND 240 #define PREHEAT_2_TEMP_BED 110 #define PREHEAT_2_TEMP_CHAMBER 35 -#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 +#define PREHEAT_2_FAN_SPEED 255 // Value from 0 to 255 + +#define PREHEAT_3_LABEL "petG" +#define PREHEAT_3_TEMP_HOTEND 220 +#define PREHEAT_3_TEMP_BED 45 +#define PREHEAT_3_TEMP_CHAMBER 35 +#define PREHEAT_3_FAN_SPEED 255 // Value from 0 to 255 + +#define PREHEAT_4_LABEL "Nylon" +#define PREHEAT_4_TEMP_HOTEND 230 +#define PREHEAT_4_TEMP_BED 45 +#define PREHEAT_4_TEMP_CHAMBER 35 +#define PREHEAT_4_FAN_SPEED 255 // Value from 0 to 255 /** * Nozzle Park @@ -1728,7 +1741,7 @@ * P1 Raise the nozzle always to Z-park height. * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. */ -//#define NOZZLE_PARK_FEATURE +#define NOZZLE_PARK_FEATURE #if ENABLED(NOZZLE_PARK_FEATURE) // Specify a park position as { X, Y, Z_raise } @@ -1921,7 +1934,7 @@ * * :['JAPANESE', 'WESTERN', 'CYRILLIC'] */ -#define DISPLAY_CHARSET_HD44780 JAPANESE +#define DISPLAY_CHARSET_HD44780 WESTERN /** * Info Screen Style (0:Classic, 1:Průša) @@ -1936,7 +1949,7 @@ * SD Card support is disabled by default. If your controller has an SD slot, * you must uncomment the following option or it won't work. */ -//#define SDSUPPORT +#define SDSUPPORT /** * SD CARD: ENABLE CRC @@ -2006,7 +2019,7 @@ // // Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. // -//#define INDIVIDUAL_AXIS_HOMING_MENU +#define INDIVIDUAL_AXIS_HOMING_MENU // // SPEAKER/BUZZER @@ -2287,7 +2300,7 @@ // This is RAMPS-compatible using a single 10-pin connector. // (For CR-10 owners who want to replace the Melzi Creality board but retain the display) // -//#define CR10_STOCKDISPLAY +#define CR10_STOCKDISPLAY // // Ender-2 OEM display, a variant of the MKS_MINI_12864 diff --git a/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h b/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h index 5335fa012a..a2993cbee2 100644 --- a/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h +++ b/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Creality/CR-10/BigTreeTech SKR Mini E3 2.0" + /** * Configuration_adv.h * @@ -258,8 +260,8 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 20 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // Seconds + #define WATCH_TEMP_INCREASE 4 // Degrees Celsius #endif /** @@ -461,7 +463,7 @@ * The fan turns on automatically whenever any driver is enabled and turns * off (or reduces to idle speed) shortly after drivers are turned off. */ -//#define USE_CONTROLLER_FAN +#define USE_CONTROLLER_FAN #if ENABLED(USE_CONTROLLER_FAN) //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan //#define CONTROLLER_FAN_USE_Z_ONLY // With this option only the Z axis is considered @@ -470,7 +472,7 @@ #define CONTROLLERFAN_SPEED_ACTIVE 255 // (0-255) Active speed, used when any motor is enabled #define CONTROLLERFAN_SPEED_IDLE 0 // (0-255) Idle speed, used when motors are disabled #define CONTROLLERFAN_IDLE_TIME 60 // (seconds) Extra time to keep the fan running after disabling motors - //#define CONTROLLER_FAN_EDITABLE // Enable M710 configurable settings + #define CONTROLLER_FAN_EDITABLE // Enable M710 configurable settings #if ENABLED(CONTROLLER_FAN_EDITABLE) #define CONTROLLER_FAN_MENU // Enable the Controller Fan submenu #endif @@ -741,7 +743,7 @@ //#define HOMING_BACKOFF_POST_MM { 2, 2, 2 } // (mm) Backoff from endstops after homing -//#define QUICK_HOME // If G28 contains XY do a diagonal move first +#define QUICK_HOME // If G28 contains XY do a diagonal move first //#define HOME_Y_BEFORE_X // If G28 contains XY home Y before X //#define HOME_Z_FIRST // Home Z first. Requires a Z-MIN endstop (not a probe). //#define CODEPENDENT_XY_HOMING // If X/Y can't home without homing Y/X first @@ -867,7 +869,7 @@ // On a 300mm bed a 5% grade would give a misalignment of ~1.5cm #define G34_MAX_GRADE 5 // (%) Maximum incline that G34 will handle - #define Z_STEPPER_ALIGN_ITERATIONS 5 // Number of iterations to apply during alignment + #define Z_STEPPER_ALIGN_ITERATIONS 3 // Number of iterations to apply during alignment #define Z_STEPPER_ALIGN_ACC 0.02 // Stop iterating early if the accuracy is better than this #define RESTORE_LEVELING_AFTER_G34 // Restore leveling after G34 is done? // After G34, re-home Z (G28 Z) or just calculate it from the last probe heights? @@ -882,7 +884,7 @@ #if ENABLED(ASSISTED_TRAMMING) // Define positions for probe points. - #define TRAMMING_POINT_XY { { 20, 20 }, { 180, 20 }, { 180, 180 }, { 20, 180 } } + #define TRAMMING_POINT_XY { { 20, 20 }, { 300, 20 }, { 300, 300 }, { 20, 300 } } // Define position names for probe points. #define TRAMMING_POINT_NAME_1 "Front-Left" @@ -1175,7 +1177,7 @@ #endif // Include a page of printer information in the LCD Main Menu - //#define LCD_INFO_MENU + #define LCD_INFO_MENU #if ENABLED(LCD_INFO_MENU) //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages #endif @@ -1229,13 +1231,13 @@ #endif // Scroll a longer status message into view - //#define STATUS_MESSAGE_SCROLLING + #define STATUS_MESSAGE_SCROLLING // On the Info Screen, display XY with one decimal place when possible //#define LCD_DECIMAL_SMALL_XY // Add an 'M73' G-code to set the current percentage - //#define LCD_SET_PROGRESS_MANUALLY + #define LCD_SET_PROGRESS_MANUALLY // Show the E position (filament used) during printing //#define LCD_SHOW_E_TOTAL @@ -1361,16 +1363,16 @@ * - SDSORT_CACHE_NAMES will retain the sorted file listing in RAM. (Expensive!) * - SDSORT_DYNAMIC_RAM only uses RAM when the SD menu is visible. (Use with caution!) */ - //#define SDCARD_SORT_ALPHA + #define SDCARD_SORT_ALPHA // SD Card Sorting options #if ENABLED(SDCARD_SORT_ALPHA) #define SDSORT_LIMIT 40 // Maximum number of sorted items (10-256). Costs 27 bytes each. #define FOLDER_SORTING -1 // -1=above 0=none 1=below #define SDSORT_GCODE false // Allow turning sorting on/off with LCD and M34 G-code. - #define SDSORT_USES_RAM false // Pre-allocate a static array for faster pre-sorting. + #define SDSORT_USES_RAM true // Pre-allocate a static array for faster pre-sorting. #define SDSORT_USES_STACK false // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.) - #define SDSORT_CACHE_NAMES false // Keep sorted items in RAM longer for speedy performance. Most expensive option. + #define SDSORT_CACHE_NAMES true // Keep sorted items in RAM longer for speedy performance. Most expensive option. #define SDSORT_DYNAMIC_RAM false // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use! #define SDSORT_CACHE_VFATS 2 // Maximum number of 13-byte VFAT entries to use for sorting. // Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM. @@ -1381,10 +1383,10 @@ //#define UTF_FILENAME_SUPPORT // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT + #define LONG_FILENAME_HOST_SUPPORT // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES + #define SCROLL_LONG_FILENAMES // Leave the heaters on after Stop Print (not recommended!) //#define SD_ABORT_NO_COOLDOWN @@ -1394,7 +1396,7 @@ * This feature must be enabled with "M540 S1" or from the LCD menu. * To have any effect, endstops must be enabled during SD printing. */ - //#define SD_ABORT_ON_ENDSTOP_HIT + #define SD_ABORT_ON_ENDSTOP_HIT /** * This option makes it easier to print the same SD Card file again. @@ -1476,7 +1478,7 @@ * * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] */ - //#define SDCARD_CONNECTION LCD + #define SDCARD_CONNECTION ONBOARD // Enable if SD detect is rendered useless (e.g., by using an SD extender) //#define NO_SD_DETECT @@ -1790,7 +1792,7 @@ * * Warning: Does not respect endstops! */ -//#define BABYSTEPPING +#define BABYSTEPPING #if ENABLED(BABYSTEPPING) //#define INTEGRATED_BABYSTEPPING // EXPERIMENTAL integration of babystepping into the Stepper ISR //#define BABYSTEP_WITHOUT_HOMING @@ -1801,7 +1803,7 @@ #define BABYSTEP_MULTIPLICATOR_Z 1 // (steps or mm) Steps or millimeter distance for each Z babystep #define BABYSTEP_MULTIPLICATOR_XY 1 // (steps or mm) Steps or millimeter distance for each XY babystep - //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. + #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. // Note: Extra time may be added to mitigate controller latency. @@ -1837,12 +1839,12 @@ * * See https://marlinfw.org/docs/features/lin_advance.html for full instructions. */ -//#define LIN_ADVANCE +#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) //#define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants - #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed + #define LIN_ADVANCE_K 0.0 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // If enabled, this will generate debug information output over USB. - //#define EXPERIMENTAL_SCURVE // Enable this option to permit S-Curve Acceleration + #define EXPERIMENTAL_SCURVE // Enable this option to permit S-Curve Acceleration #endif // @section leveling @@ -1982,7 +1984,7 @@ // // G2/G3 Arc Support // -#define ARC_SUPPORT // Disable this feature to save ~3226 bytes +//#define ARC_SUPPORT // Disable this feature to save ~3226 bytes #if ENABLED(ARC_SUPPORT) #define MM_PER_ARC_SEGMENT 1 // (mm) Length (or minimum length) of each arc segment //#define ARC_SEGMENTS_PER_R 1 // Max segment length, MM_PER = Min @@ -2141,7 +2143,7 @@ * Currently handles M108, M112, M410, M876 * NOTE: Not yet implemented for all platforms. */ -//#define EMERGENCY_PARSER +#define EMERGENCY_PARSER /** * Realtime Reporting (requires EMERGENCY_PARSER) @@ -2311,14 +2313,14 @@ * * Enable PARK_HEAD_ON_PAUSE to add the G-code M125 Pause and Park. */ -//#define ADVANCED_PAUSE_FEATURE +#define ADVANCED_PAUSE_FEATURE #if ENABLED(ADVANCED_PAUSE_FEATURE) #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. // This short retract is done immediately, before parking the nozzle. #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast. #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload. + #define FILAMENT_CHANGE_UNLOAD_LENGTH 400 // (mm) The length of filament for a complete unload. // For Bowden, the full length of the tube and nozzle. // For direct drive, the full length of the nozzle. // Set to 0 for manual unloading. @@ -2327,7 +2329,7 @@ // 0 to disable start loading and skip to fast load only #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast. #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle. + #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 350 // (mm) Load length of filament, from extruder gear to nozzle. // For Bowden, the full length of the tube and nozzle. // For direct drive, the full length of the nozzle. //#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted. @@ -2349,10 +2351,10 @@ #define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed. #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change. - //#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. - //#define HOME_BEFORE_FILAMENT_CHANGE // If needed, home before parking for filament change + #define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. + #define HOME_BEFORE_FILAMENT_CHANGE // If needed, home before parking for filament change - //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. + #define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) #endif @@ -2493,8 +2495,8 @@ #define INTERPOLATE true #if AXIS_IS_TMC(X) - #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. - #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for sensorless homing + #define X_CURRENT 580 // (mA) RMS current. Multiply by 1.414 for peak current. + #define X_CURRENT_HOME (X_CURRENT/2) // (mA) RMS current for sensorless homing #define X_MICROSTEPS 16 // 0..256 #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... @@ -2511,8 +2513,8 @@ #endif #if AXIS_IS_TMC(Y) - #define Y_CURRENT 800 - #define Y_CURRENT_HOME Y_CURRENT + #define Y_CURRENT 580 + #define Y_CURRENT_HOME (Y_CURRENT/2) #define Y_MICROSTEPS 16 #define Y_RSENSE 0.11 #define Y_CHAIN_POS -1 @@ -2529,7 +2531,7 @@ #endif #if AXIS_IS_TMC(Z) - #define Z_CURRENT 800 + #define Z_CURRENT 580 #define Z_CURRENT_HOME Z_CURRENT #define Z_MICROSTEPS 16 #define Z_RSENSE 0.11 @@ -2565,7 +2567,7 @@ #endif #if AXIS_IS_TMC(E0) - #define E0_CURRENT 800 + #define E0_CURRENT 650 #define E0_MICROSTEPS 16 #define E0_RSENSE 0.11 #define E0_CHAIN_POS -1 @@ -2670,15 +2672,15 @@ * Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers * on the same serial port, either here or in your board's pins file. */ - //#define X_SLAVE_ADDRESS 0 - //#define Y_SLAVE_ADDRESS 0 - //#define Z_SLAVE_ADDRESS 0 + #define X_SLAVE_ADDRESS 0 + #define Y_SLAVE_ADDRESS 2 + #define Z_SLAVE_ADDRESS 1 //#define X2_SLAVE_ADDRESS 0 //#define Y2_SLAVE_ADDRESS 0 //#define Z2_SLAVE_ADDRESS 0 //#define Z3_SLAVE_ADDRESS 0 //#define Z4_SLAVE_ADDRESS 0 - //#define E0_SLAVE_ADDRESS 0 + #define E0_SLAVE_ADDRESS 3 //#define E1_SLAVE_ADDRESS 0 //#define E2_SLAVE_ADDRESS 0 //#define E3_SLAVE_ADDRESS 0 @@ -2811,16 +2813,16 @@ #if EITHER(SENSORLESS_HOMING, SENSORLESS_PROBING) // TMC2209: 0...255. TMC2130: -64...63 - #define X_STALL_SENSITIVITY 8 + #define X_STALL_SENSITIVITY 75 #define X2_STALL_SENSITIVITY X_STALL_SENSITIVITY - #define Y_STALL_SENSITIVITY 8 + #define Y_STALL_SENSITIVITY 75 #define Y2_STALL_SENSITIVITY Y_STALL_SENSITIVITY //#define Z_STALL_SENSITIVITY 8 //#define Z2_STALL_SENSITIVITY Z_STALL_SENSITIVITY //#define Z3_STALL_SENSITIVITY Z_STALL_SENSITIVITY //#define Z4_STALL_SENSITIVITY Z_STALL_SENSITIVITY //#define SPI_ENDSTOPS // TMC2130 only - //#define IMPROVE_HOMING_RELIABILITY + #define IMPROVE_HOMING_RELIABILITY #endif /** @@ -2839,7 +2841,7 @@ * Beta feature! * Create a 50/50 square wave step pulse optimal for stepper drivers. */ - //#define SQUARE_WAVE_STEPPING + #define SQUARE_WAVE_STEPPING /** * Enable M122 debugging command for TMC stepper drivers. diff --git a/config/examples/Creality/CR-10/CrealityV1/Configuration.h b/config/examples/Creality/CR-10/CrealityV1/Configuration.h index 78c2dc9160..21f3056722 100644 --- a/config/examples/Creality/CR-10/CrealityV1/Configuration.h +++ b/config/examples/Creality/CR-10/CrealityV1/Configuration.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Creality/CR-10/CrealityV1" + /** * Configuration.h * @@ -69,7 +71,7 @@ // @section info // Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes. +#define STRING_CONFIG_H_AUTHOR "(Creality CR-10)" // Who made the changes. //#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) /** @@ -87,7 +89,7 @@ #define SHOW_BOOTSCREEN // Show the bitmap in Marlin/_Bootscreen.h on startup. -//#define SHOW_CUSTOM_BOOTSCREEN +#define SHOW_CUSTOM_BOOTSCREEN // Show the bitmap in Marlin/_Statusscreen.h on the status screen. //#define CUSTOM_STATUS_SCREEN_IMAGE @@ -127,18 +129,18 @@ * * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ -#define BAUDRATE 250000 +#define BAUDRATE 115200 // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH // Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_RAMPS_14_EFB + #define MOTHERBOARD BOARD_MELZI_CREALITY #endif // Name displayed in the LCD "Ready" message and Info menu -//#define CUSTOM_MACHINE_NAME "3D Printer" +#define CUSTOM_MACHINE_NAME "CR-10" // Printer's unique ID, used by some programs to differentiate between machines. // Choose your own or use a service like https://www.uuidgenerator.net/version4 @@ -424,7 +426,7 @@ #define TEMP_SENSOR_5 0 #define TEMP_SENSOR_6 0 #define TEMP_SENSOR_7 0 -#define TEMP_SENSOR_BED 0 +#define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 #define TEMP_SENSOR_COOLER 0 @@ -480,7 +482,7 @@ #define HEATER_5_MAXTEMP 275 #define HEATER_6_MAXTEMP 275 #define HEATER_7_MAXTEMP 275 -#define BED_MAXTEMP 150 +#define BED_MAXTEMP 120 #define CHAMBER_MAXTEMP 60 /** @@ -510,16 +512,17 @@ //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) // Set/get with gcode: M301 E[extruder number, 0-2] + // Stock CR-10 tuned for 70C #if ENABLED(PID_PARAMS_PER_HOTEND) // Specify between 1 and HOTENDS values per array. // If fewer than EXTRUDER values are provided, the last element will be repeated. - #define DEFAULT_Kp_LIST { 22.20, 22.20 } - #define DEFAULT_Ki_LIST { 1.08, 1.08 } - #define DEFAULT_Kd_LIST { 114.00, 114.00 } + #define DEFAULT_Kp_LIST { 22.57, 22.57 } + #define DEFAULT_Ki_LIST { 1.72, 1.72 } + #define DEFAULT_Kd_LIST { 73.96, 73.96 } #else - #define DEFAULT_Kp 22.20 - #define DEFAULT_Ki 1.08 - #define DEFAULT_Kd 114.00 + #define DEFAULT_Kp 22.57 + #define DEFAULT_Ki 1.72 + #define DEFAULT_Kd 73.96 #endif #endif // PIDTEMP @@ -540,7 +543,7 @@ * heater. If your configuration is significantly different than this and you don't understand * the issues involved, don't use bed PID until someone else verifies that your hardware works. */ -//#define PIDTEMPBED +#define PIDTEMPBED //#define BED_LIMIT_SWITCHING @@ -556,11 +559,10 @@ //#define MIN_BED_POWER 0 //#define PID_BED_DEBUG // Sends debug data to the serial port. - // 120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - // from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) - #define DEFAULT_bedKp 10.00 - #define DEFAULT_bedKi .023 - #define DEFAULT_bedKd 305.4 + // Stock CR-10 Bed Tuned for 70C + #define DEFAULT_bedKp 426.68 + #define DEFAULT_bedKi 78.92 + #define DEFAULT_bedKd 576.71 // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. #endif // PIDTEMPBED @@ -634,7 +636,7 @@ * Note: For Bowden Extruders make this large enough to allow load/unload. */ #define PREVENT_LENGTHY_EXTRUDE -#define EXTRUDE_MAXLENGTH 200 +#define EXTRUDE_MAXLENGTH 1000 //=========================================================================== //======================== Thermal Runaway Protection ======================= @@ -691,7 +693,7 @@ //#define USE_ZMAX_PLUG // Enable pullup for all endstops to prevent a floating state -#define ENDSTOPPULLUPS +//#define ENDSTOPPULLUPS #if DISABLED(ENDSTOPPULLUPS) // Disable ENDSTOPPULLUPS to set pullups individually //#define ENDSTOPPULLUP_XMAX @@ -806,14 +808,14 @@ * Override with M92 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 500 } +#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 95 } /** * Default Max Feed Rate (mm/s) * Override with M203 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 } +#define DEFAULT_MAX_FEEDRATE { 2500, 2500, 100, 25 } //#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 #if ENABLED(LIMITED_MAX_FR_EDITING) @@ -826,7 +828,7 @@ * Override with M201 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 } +#define DEFAULT_MAX_ACCELERATION { 500, 500, 100, 5000 } //#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 #if ENABLED(LIMITED_MAX_ACCEL_EDITING) @@ -841,9 +843,9 @@ * M204 R Retract Acceleration * M204 T Travel Acceleration */ -#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves +#define DEFAULT_ACCELERATION 600 // X, Y, Z and E acceleration for printing moves +#define DEFAULT_RETRACT_ACCELERATION 1000 // E acceleration for retracts +#define DEFAULT_TRAVEL_ACCELERATION 800 // X, Y, Z acceleration for travel (non printing) moves /** * Default Jerk limits (mm/s) @@ -857,7 +859,7 @@ #if ENABLED(CLASSIC_JERK) #define DEFAULT_XJERK 10.0 #define DEFAULT_YJERK 10.0 - #define DEFAULT_ZJERK 0.3 + #define DEFAULT_ZJERK 2.7 //#define TRAVEL_EXTRA_XYJERK 0.0 // Additional jerk allowance for all travel moves @@ -877,7 +879,7 @@ * https://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html */ #if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.013 // (mm) Distance from real junction edge + #define JUNCTION_DEVIATION_MM 0.067 // (mm) Distance from real junction edge #define JD_HANDLE_SMALL_SEGMENTS // Use curvature estimation instead of just the junction angle // for small segments (< 1mm) with large junction angles (> 135°). #endif @@ -1124,9 +1126,9 @@ * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. */ #define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow -#define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points +#define Z_CLEARANCE_BETWEEN_PROBES 10 // Z Clearance between probe points #define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes -//#define Z_AFTER_PROBING 5 // Z position after probing is done +//#define Z_AFTER_PROBING 10 // Z position after probing is done #define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping @@ -1190,14 +1192,14 @@ // @section machine // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR false +#define INVERT_X_DIR true #define INVERT_Y_DIR true #define INVERT_Z_DIR false // @section extruder // For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR false +#define INVERT_E0_DIR true #define INVERT_E1_DIR false #define INVERT_E2_DIR false #define INVERT_E3_DIR false @@ -1232,16 +1234,16 @@ // @section machine // The size of the printable area -#define X_BED_SIZE 200 -#define Y_BED_SIZE 200 +#define X_BED_SIZE 300 +#define Y_BED_SIZE 300 // Travel limits (mm) after homing, corresponding to endstop positions. #define X_MIN_POS 0 #define Y_MIN_POS 0 #define Z_MIN_POS 0 -#define X_MAX_POS X_BED_SIZE +#define X_MAX_POS X_BED_SIZE + 20 #define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 200 +#define Z_MAX_POS 400 /** * Software Endstops @@ -1527,7 +1529,7 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS +#define LEVEL_BED_CORNERS #if ENABLED(LEVEL_BED_CORNERS) #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets @@ -1595,7 +1597,7 @@ #endif // Homing speeds (mm/min) -#define HOMING_FEEDRATE_MM_M { (50*60), (50*60), (4*60) } +#define HOMING_FEEDRATE_MM_M { (20*60), (20*60), (4*60) } // Validate that endstops are triggered on homing moves #define VALIDATE_HOMING_ENDSTOPS @@ -1672,7 +1674,7 @@ * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) */ -//#define EEPROM_SETTINGS // Persistent storage with M500 and M501 +#define EEPROM_SETTINGS // Persistent storage with M500 and M501 //#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. #define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load @@ -1706,7 +1708,7 @@ // Preheat Constants - Up to 5 are supported without changes // #define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 180 +#define PREHEAT_1_TEMP_HOTEND 190 #define PREHEAT_1_TEMP_BED 70 #define PREHEAT_1_TEMP_CHAMBER 35 #define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 @@ -1728,7 +1730,7 @@ * P1 Raise the nozzle always to Z-park height. * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. */ -//#define NOZZLE_PARK_FEATURE +#define NOZZLE_PARK_FEATURE #if ENABLED(NOZZLE_PARK_FEATURE) // Specify a park position as { X, Y, Z_raise } @@ -1936,7 +1938,7 @@ * SD Card support is disabled by default. If your controller has an SD slot, * you must uncomment the following option or it won't work. */ -//#define SDSUPPORT +#define SDSUPPORT /** * SD CARD: ENABLE CRC @@ -2014,7 +2016,7 @@ // If you have a speaker that can produce tones, enable it here. // By default Marlin assumes you have a buzzer with a fixed frequency. // -//#define SPEAKER +#define SPEAKER // // The duration and frequency for the UI feedback sound. @@ -2287,7 +2289,7 @@ // This is RAMPS-compatible using a single 10-pin connector. // (For CR-10 owners who want to replace the Melzi Creality board but retain the display) // -//#define CR10_STOCKDISPLAY +#define CR10_STOCKDISPLAY // // Ender-2 OEM display, a variant of the MKS_MINI_12864 diff --git a/config/examples/Creality/CR-10/CrealityV1/Configuration_adv.h b/config/examples/Creality/CR-10/CrealityV1/Configuration_adv.h index 5335fa012a..acd0c3dce3 100644 --- a/config/examples/Creality/CR-10/CrealityV1/Configuration_adv.h +++ b/config/examples/Creality/CR-10/CrealityV1/Configuration_adv.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Creality/CR-10/CrealityV1" + /** * Configuration_adv.h * @@ -741,7 +743,7 @@ //#define HOMING_BACKOFF_POST_MM { 2, 2, 2 } // (mm) Backoff from endstops after homing -//#define QUICK_HOME // If G28 contains XY do a diagonal move first +#define QUICK_HOME // If G28 contains XY do a diagonal move first //#define HOME_Y_BEFORE_X // If G28 contains XY home Y before X //#define HOME_Z_FIRST // Home Z first. Requires a Z-MIN endstop (not a probe). //#define CODEPENDENT_XY_HOMING // If X/Y can't home without homing Y/X first @@ -792,7 +794,7 @@ * differs, a mode set eeprom write will be completed at initialization. * Use the option below to force an eeprom write to a V3.1 probe regardless. */ - //#define BLTOUCH_SET_5V_MODE + #define BLTOUCH_SET_5V_MODE /** * Safety: Activate if connecting a probe with an unknown voltage mode. @@ -867,7 +869,7 @@ // On a 300mm bed a 5% grade would give a misalignment of ~1.5cm #define G34_MAX_GRADE 5 // (%) Maximum incline that G34 will handle - #define Z_STEPPER_ALIGN_ITERATIONS 5 // Number of iterations to apply during alignment + #define Z_STEPPER_ALIGN_ITERATIONS 3 // Number of iterations to apply during alignment #define Z_STEPPER_ALIGN_ACC 0.02 // Stop iterating early if the accuracy is better than this #define RESTORE_LEVELING_AFTER_G34 // Restore leveling after G34 is done? // After G34, re-home Z (G28 Z) or just calculate it from the last probe heights? @@ -1229,7 +1231,7 @@ #endif // Scroll a longer status message into view - //#define STATUS_MESSAGE_SCROLLING + #define STATUS_MESSAGE_SCROLLING // On the Info Screen, display XY with one decimal place when possible //#define LCD_DECIMAL_SMALL_XY @@ -1301,7 +1303,7 @@ //#define BROWSE_MEDIA_ON_INSERT // Open the file browser when media is inserted - #define EVENT_GCODE_SD_ABORT "G28XY" // G-code to run on SD Abort Print (e.g., "G28XY" or "G27") + #define EVENT_GCODE_SD_ABORT "G27" // G-code to run on SD Abort Print (e.g., "G28XY" or "G27") #if ENABLED(PRINTER_EVENT_LEDS) #define PE_LEDS_COMPLETED_TIME (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination @@ -1361,16 +1363,16 @@ * - SDSORT_CACHE_NAMES will retain the sorted file listing in RAM. (Expensive!) * - SDSORT_DYNAMIC_RAM only uses RAM when the SD menu is visible. (Use with caution!) */ - //#define SDCARD_SORT_ALPHA + #define SDCARD_SORT_ALPHA // SD Card Sorting options #if ENABLED(SDCARD_SORT_ALPHA) - #define SDSORT_LIMIT 40 // Maximum number of sorted items (10-256). Costs 27 bytes each. + #define SDSORT_LIMIT 256 // Maximum number of sorted items (10-256). Costs 27 bytes each. #define FOLDER_SORTING -1 // -1=above 0=none 1=below #define SDSORT_GCODE false // Allow turning sorting on/off with LCD and M34 G-code. - #define SDSORT_USES_RAM false // Pre-allocate a static array for faster pre-sorting. + #define SDSORT_USES_RAM true // Pre-allocate a static array for faster pre-sorting. #define SDSORT_USES_STACK false // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.) - #define SDSORT_CACHE_NAMES false // Keep sorted items in RAM longer for speedy performance. Most expensive option. + #define SDSORT_CACHE_NAMES true // Keep sorted items in RAM longer for speedy performance. Most expensive option. #define SDSORT_DYNAMIC_RAM false // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use! #define SDSORT_CACHE_VFATS 2 // Maximum number of 13-byte VFAT entries to use for sorting. // Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM. @@ -1790,7 +1792,7 @@ * * Warning: Does not respect endstops! */ -//#define BABYSTEPPING +#define BABYSTEPPING #if ENABLED(BABYSTEPPING) //#define INTEGRATED_BABYSTEPPING // EXPERIMENTAL integration of babystepping into the Stepper ISR //#define BABYSTEP_WITHOUT_HOMING @@ -1798,10 +1800,10 @@ //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way //#define BABYSTEP_MILLIMETER_UNITS // Specify BABYSTEP_MULTIPLICATOR_(XY|Z) in mm instead of micro-steps - #define BABYSTEP_MULTIPLICATOR_Z 1 // (steps or mm) Steps or millimeter distance for each Z babystep - #define BABYSTEP_MULTIPLICATOR_XY 1 // (steps or mm) Steps or millimeter distance for each XY babystep + #define BABYSTEP_MULTIPLICATOR_Z 10 // (steps or mm) Steps or millimeter distance for each Z babystep + #define BABYSTEP_MULTIPLICATOR_XY 10 // (steps or mm) Steps or millimeter distance for each Z babystep - //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. + #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. // Note: Extra time may be added to mitigate controller latency. @@ -1982,7 +1984,7 @@ // // G2/G3 Arc Support // -#define ARC_SUPPORT // Disable this feature to save ~3226 bytes +//#define ARC_SUPPORT // Disable this feature to save ~3226 bytes #if ENABLED(ARC_SUPPORT) #define MM_PER_ARC_SEGMENT 1 // (mm) Length (or minimum length) of each arc segment //#define ARC_SEGMENTS_PER_R 1 // Max segment length, MM_PER = Min @@ -2311,21 +2313,21 @@ * * Enable PARK_HEAD_ON_PAUSE to add the G-code M125 Pause and Park. */ -//#define ADVANCED_PAUSE_FEATURE +#define ADVANCED_PAUSE_FEATURE #if ENABLED(ADVANCED_PAUSE_FEATURE) #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. - #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. + #define PAUSE_PARK_RETRACT_LENGTH 4 // (mm) Initial retract. // This short retract is done immediately, before parking the nozzle. #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast. #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload. + #define FILAMENT_CHANGE_UNLOAD_LENGTH 420 // (mm) The length of filament for a complete unload. // For Bowden, the full length of the tube and nozzle. // For direct drive, the full length of the nozzle. // Set to 0 for manual unloading. #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE 6 // (mm/s) Slow move when starting load. #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 0 // (mm) Slow length, to allow time to insert material. // 0 to disable start loading and skip to fast load only - #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast. + #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 8 // (mm/s) Load filament feedrate. This can be pretty fast. #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle. // For Bowden, the full length of the tube and nozzle. @@ -2345,12 +2347,12 @@ #define FILAMENT_UNLOAD_PURGE_LENGTH 8 // (mm) An unretract is done, then this length is purged. #define FILAMENT_UNLOAD_PURGE_FEEDRATE 25 // (mm/s) feedrate to purge before unload - #define PAUSE_PARK_NOZZLE_TIMEOUT 45 // (seconds) Time limit before the nozzle is turned off for safety. - #define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed. + #define PAUSE_PARK_NOZZLE_TIMEOUT 120 // (seconds) Time limit before the nozzle is turned off for safety. + #define FILAMENT_CHANGE_ALERT_BEEPS 6 // Number of alert beeps to play when a response is needed. #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change. - //#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. - //#define HOME_BEFORE_FILAMENT_CHANGE // If needed, home before parking for filament change + #define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. + #define HOME_BEFORE_FILAMENT_CHANGE // If needed, home before parking for filament change //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) @@ -2493,7 +2495,7 @@ #define INTERPOLATE true #if AXIS_IS_TMC(X) - #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. + #define X_CURRENT 650 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for sensorless homing #define X_MICROSTEPS 16 // 0..256 #define X_RSENSE 0.11 @@ -2511,7 +2513,7 @@ #endif #if AXIS_IS_TMC(Y) - #define Y_CURRENT 800 + #define Y_CURRENT 650 #define Y_CURRENT_HOME Y_CURRENT #define Y_MICROSTEPS 16 #define Y_RSENSE 0.11 @@ -2529,7 +2531,7 @@ #endif #if AXIS_IS_TMC(Z) - #define Z_CURRENT 800 + #define Z_CURRENT 580 #define Z_CURRENT_HOME Z_CURRENT #define Z_MICROSTEPS 16 #define Z_RSENSE 0.11 @@ -2565,7 +2567,7 @@ #endif #if AXIS_IS_TMC(E0) - #define E0_CURRENT 800 + #define E0_CURRENT 650 #define E0_MICROSTEPS 16 #define E0_RSENSE 0.11 #define E0_CHAIN_POS -1 @@ -3358,11 +3360,14 @@ */ //#define FILAMENT_WIDTH_SENSOR +#define DEFAULT_STDDEV_FILAMENT_DIA 0.05 // Typical estimate for cheap filament +//#define DEFAULT_STDDEV_FILAMENT_DIA 0.02 // Typical advertised for higher quality filament + #if ENABLED(FILAMENT_WIDTH_SENSOR) #define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor. :[0,1,2,3,4] #define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber - #define FILWIDTH_ERROR_MARGIN 1.0 // (mm) If a measurement differs too much from nominal width ignore it + #define FILWIDTH_ERROR_MARGIN (DEFAULT_STDDEV_FILAMENT_DIA*4) // (mm) If a measurement differs too much from nominal width ignore it #define MAX_MEASUREMENT_DELAY 20 // (bytes) Buffer size for stored measurements (1 byte per cm). Must be larger than MEASUREMENT_DELAY_CM. #define DEFAULT_MEASURED_FILAMENT_DIA DEFAULT_NOMINAL_FILAMENT_DIA // Set measured to nominal initially @@ -3471,7 +3476,7 @@ * - M206 and M428 are disabled. * - G92 will revert to its behavior from Marlin 1.0. */ -//#define NO_WORKSPACE_OFFSETS +#define NO_WORKSPACE_OFFSETS // Extra options for the M114 "Current Position" report //#define M114_DETAIL // Use 'M114` for details to check planner calculations diff --git a/config/examples/Creality/CR-10S/BigTreeTech SKR 1.4 Turbo TMC2209/Configuration.h b/config/examples/Creality/CR-10S/BigTreeTech SKR 1.4 Turbo TMC2209/Configuration.h index 78c2dc9160..0180bfc393 100644 --- a/config/examples/Creality/CR-10S/BigTreeTech SKR 1.4 Turbo TMC2209/Configuration.h +++ b/config/examples/Creality/CR-10S/BigTreeTech SKR 1.4 Turbo TMC2209/Configuration.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Creality/CR-10S/BigTreeTech SKR 1.4 Turbo TMC2209" + /** * Configuration.h * @@ -69,7 +71,7 @@ // @section info // Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes. +#define STRING_CONFIG_H_AUTHOR "(StoneAxeCommander)" // Who made the changes. //#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) /** @@ -87,10 +89,10 @@ #define SHOW_BOOTSCREEN // Show the bitmap in Marlin/_Bootscreen.h on startup. -//#define SHOW_CUSTOM_BOOTSCREEN +#define SHOW_CUSTOM_BOOTSCREEN // Show the bitmap in Marlin/_Statusscreen.h on the status screen. -//#define CUSTOM_STATUS_SCREEN_IMAGE +#define CUSTOM_STATUS_SCREEN_IMAGE // @section machine @@ -102,14 +104,14 @@ * * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] */ -#define SERIAL_PORT 0 +#define SERIAL_PORT -1 /** * Select a secondary serial port on the board to use for communication with the host. * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] */ -//#define SERIAL_PORT_2 -1 +#define SERIAL_PORT_2 0 /** * Select a third serial port on the board to use for communication with the host. @@ -127,22 +129,22 @@ * * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ -#define BAUDRATE 250000 +#define BAUDRATE 115200 // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH // Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_RAMPS_14_EFB + #define MOTHERBOARD BOARD_BTT_SKR_V1_4_TURBO #endif // Name displayed in the LCD "Ready" message and Info menu -//#define CUSTOM_MACHINE_NAME "3D Printer" +#define CUSTOM_MACHINE_NAME "CR-10S" // Printer's unique ID, used by some programs to differentiate between machines. // Choose your own or use a service like https://www.uuidgenerator.net/version4 -//#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" +#define MACHINE_UUID "cede2a2f-41a2-4748-9b12-c55c62f367ff" // @section extruder @@ -424,7 +426,7 @@ #define TEMP_SENSOR_5 0 #define TEMP_SENSOR_6 0 #define TEMP_SENSOR_7 0 -#define TEMP_SENSOR_BED 0 +#define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 #define TEMP_SENSOR_COOLER 0 @@ -480,7 +482,7 @@ #define HEATER_5_MAXTEMP 275 #define HEATER_6_MAXTEMP 275 #define HEATER_7_MAXTEMP 275 -#define BED_MAXTEMP 150 +#define BED_MAXTEMP 125 #define CHAMBER_MAXTEMP 60 /** @@ -505,11 +507,12 @@ #define PID_K1 0.95 // Smoothing factor within any PID loop #if ENABLED(PIDTEMP) - //#define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) - //#define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) + #define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) + #define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) // Set/get with gcode: M301 E[extruder number, 0-2] + // Creality CR-10s #if ENABLED(PID_PARAMS_PER_HOTEND) // Specify between 1 and HOTENDS values per array. // If fewer than EXTRUDER values are provided, the last element will be repeated. @@ -556,11 +559,10 @@ //#define MIN_BED_POWER 0 //#define PID_BED_DEBUG // Sends debug data to the serial port. - // 120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - // from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) - #define DEFAULT_bedKp 10.00 - #define DEFAULT_bedKi .023 - #define DEFAULT_bedKd 305.4 + // CR-10S with SKR 1.4 board + #define DEFAULT_bedKp 70.13 + #define DEFAULT_bedKi 11.27 + #define DEFAULT_bedKd 290.86 // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. #endif // PIDTEMPBED @@ -634,7 +636,7 @@ * Note: For Bowden Extruders make this large enough to allow load/unload. */ #define PREVENT_LENGTHY_EXTRUDE -#define EXTRUDE_MAXLENGTH 200 +#define EXTRUDE_MAXLENGTH 435 //=========================================================================== //======================== Thermal Runaway Protection ======================= @@ -743,17 +745,17 @@ * TMC5130, TMC5130_STANDALONE, TMC5160, TMC5160_STANDALONE * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'L6474', 'POWERSTEP01', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2160', 'TMC2160_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC2209', 'TMC2209_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE', 'TMC5160', 'TMC5160_STANDALONE'] */ -#define X_DRIVER_TYPE A4988 -#define Y_DRIVER_TYPE A4988 -#define Z_DRIVER_TYPE A4988 +#define X_DRIVER_TYPE TMC2209 +#define Y_DRIVER_TYPE TMC2209 +#define Z_DRIVER_TYPE TMC2209 //#define X2_DRIVER_TYPE A4988 //#define Y2_DRIVER_TYPE A4988 //#define Z2_DRIVER_TYPE A4988 //#define Z3_DRIVER_TYPE A4988 //#define Z4_DRIVER_TYPE A4988 -#define E0_DRIVER_TYPE A4988 -//#define E1_DRIVER_TYPE A4988 -//#define E2_DRIVER_TYPE A4988 +#define E0_DRIVER_TYPE TMC2209 +//#define E1_DRIVER_TYPE TMC2209 +//#define E2_DRIVER_TYPE TMC2209 //#define E3_DRIVER_TYPE A4988 //#define E4_DRIVER_TYPE A4988 //#define E5_DRIVER_TYPE A4988 @@ -806,14 +808,14 @@ * Override with M92 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 500 } +#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 95 } /** * Default Max Feed Rate (mm/s) * Override with M203 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 } +#define DEFAULT_MAX_FEEDRATE { 2500, 2500, 100, 25 } //#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 #if ENABLED(LIMITED_MAX_FR_EDITING) @@ -826,7 +828,7 @@ * Override with M201 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 } +#define DEFAULT_MAX_ACCELERATION { 500, 500, 100, 5000 } //#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 #if ENABLED(LIMITED_MAX_ACCEL_EDITING) @@ -841,9 +843,9 @@ * M204 R Retract Acceleration * M204 T Travel Acceleration */ -#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves +#define DEFAULT_ACCELERATION 600 // X, Y, Z and E acceleration for printing moves +#define DEFAULT_RETRACT_ACCELERATION 1000 // E acceleration for retracts +#define DEFAULT_TRAVEL_ACCELERATION 800 // X, Y, Z acceleration for travel (non printing) moves /** * Default Jerk limits (mm/s) @@ -857,7 +859,7 @@ #if ENABLED(CLASSIC_JERK) #define DEFAULT_XJERK 10.0 #define DEFAULT_YJERK 10.0 - #define DEFAULT_ZJERK 0.3 + #define DEFAULT_ZJERK 0.4 //#define TRAVEL_EXTRA_XYJERK 0.0 // Additional jerk allowance for all travel moves @@ -877,7 +879,7 @@ * https://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html */ #if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.013 // (mm) Distance from real junction edge + #define JUNCTION_DEVIATION_MM 0.067 // (mm) Distance from real junction edge #define JD_HANDLE_SMALL_SEGMENTS // Use curvature estimation instead of just the junction angle // for small segments (< 1mm) with large junction angles (> 135°). #endif @@ -940,7 +942,7 @@ * Use G29 repeatedly, adjusting the Z height at each point with movement commands * or (with LCD_BED_LEVELING) the LCD controller. */ -//#define PROBE_MANUALLY +#define PROBE_MANUALLY /** * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. @@ -1065,7 +1067,7 @@ #define XY_PROBE_FEEDRATE (133*60) // Feedrate (mm/min) for the first approach when double-probing (MULTIPLE_PROBING == 2) -#define Z_PROBE_FEEDRATE_FAST (4*60) +#define Z_PROBE_FEEDRATE_FAST (8*60) // Feedrate (mm/min) for the "accurate" probe of each point #define Z_PROBE_FEEDRATE_SLOW (Z_PROBE_FEEDRATE_FAST / 2) @@ -1190,14 +1192,14 @@ // @section machine // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR false +#define INVERT_X_DIR true #define INVERT_Y_DIR true #define INVERT_Z_DIR false // @section extruder // For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR false +#define INVERT_E0_DIR true #define INVERT_E1_DIR false #define INVERT_E2_DIR false #define INVERT_E3_DIR false @@ -1232,16 +1234,16 @@ // @section machine // The size of the printable area -#define X_BED_SIZE 200 -#define Y_BED_SIZE 200 +#define X_BED_SIZE 296 // Nozzle is at X4 when homed +#define Y_BED_SIZE 298 // Nozzle is at Y2 when homed // Travel limits (mm) after homing, corresponding to endstop positions. -#define X_MIN_POS 0 -#define Y_MIN_POS 0 +#define X_MIN_POS 4 +#define Y_MIN_POS 2 #define Z_MIN_POS 0 -#define X_MAX_POS X_BED_SIZE -#define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 200 +#define X_MAX_POS 319 // 15mm Extra space on the right end +#define Y_MAX_POS 306 // 4mm Extra space behind the bed +#define Z_MAX_POS 400 /** * Software Endstops @@ -1285,12 +1287,12 @@ * RAMPS-based boards use SERVO3_PIN for the first runout sensor. * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. */ -//#define FILAMENT_RUNOUT_SENSOR +#define FILAMENT_RUNOUT_SENSOR #if ENABLED(FILAMENT_RUNOUT_SENSOR) #define FIL_RUNOUT_ENABLED_DEFAULT true // Enable the sensor on startup. Override with M412 followed by M500. #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. + #define FIL_RUNOUT_STATE HIGH // Pin state indicating that filament is NOT present. - #define FIL_RUNOUT_STATE LOW // Pin state indicating that filament is NOT present. #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. //#define WATCH_ALL_RUNOUT_SENSORS // Execute runout script on any triggering sensor, not only for the active extruder. @@ -1387,7 +1389,7 @@ */ //#define AUTO_BED_LEVELING_3POINT //#define AUTO_BED_LEVELING_LINEAR -//#define AUTO_BED_LEVELING_BILINEAR +#define AUTO_BED_LEVELING_BILINEAR //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING @@ -1438,7 +1440,7 @@ /** * Enable the G26 Mesh Validation Pattern tool. */ - //#define G26_MESH_VALIDATION + #define G26_MESH_VALIDATION // Enable G26 mesh validation #if ENABLED(G26_MESH_VALIDATION) #define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle. #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for G26. @@ -1518,16 +1520,16 @@ * Add a bed leveling sub-menu for ABL or MBL. * Include a guided procedure if manual probing is enabled. */ -//#define LCD_BED_LEVELING +#define LCD_BED_LEVELING #if ENABLED(LCD_BED_LEVELING) #define MESH_EDIT_Z_STEP 0.025 // (mm) Step size while manually probing Z axis. #define LCD_PROBE_Z_RANGE 4 // (mm) Z Range centered on Z_MIN_POS for LCD Z adjustment - //#define MESH_EDIT_MENU // Add a menu to edit mesh points + #define MESH_EDIT_MENU // Add a menu to edit mesh points #endif // Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS +#define LEVEL_BED_CORNERS #if ENABLED(LEVEL_BED_CORNERS) #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets @@ -1590,12 +1592,12 @@ //#define Z_SAFE_HOMING #if ENABLED(Z_SAFE_HOMING) - #define Z_SAFE_HOMING_X_POINT X_CENTER // X point for Z homing - #define Z_SAFE_HOMING_Y_POINT Y_CENTER // Y point for Z homing + #define Z_SAFE_HOMING_X_POINT 150 // X point for Z homing + #define Z_SAFE_HOMING_Y_POINT 150 // Y point for Z homing #endif // Homing speeds (mm/min) -#define HOMING_FEEDRATE_MM_M { (50*60), (50*60), (4*60) } +#define HOMING_FEEDRATE_MM_M { (50*60), (50*60), (8*60) } // Validate that endstops are triggered on homing moves #define VALIDATE_HOMING_ENDSTOPS @@ -1672,12 +1674,12 @@ * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) */ -//#define EEPROM_SETTINGS // Persistent storage with M500 and M501 +#define EEPROM_SETTINGS // Persistent storage with M500 and M501 //#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. #define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load #if ENABLED(EEPROM_SETTINGS) - //#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. + #define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. #endif // @@ -1706,16 +1708,28 @@ // Preheat Constants - Up to 5 are supported without changes // #define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 180 -#define PREHEAT_1_TEMP_BED 70 +#define PREHEAT_1_TEMP_HOTEND 185 +#define PREHEAT_1_TEMP_BED 45 #define PREHEAT_1_TEMP_CHAMBER 35 -#define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 +#define PREHEAT_1_FAN_SPEED 255 // Value from 0 to 255 #define PREHEAT_2_LABEL "ABS" #define PREHEAT_2_TEMP_HOTEND 240 #define PREHEAT_2_TEMP_BED 110 #define PREHEAT_2_TEMP_CHAMBER 35 -#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 +#define PREHEAT_2_FAN_SPEED 255 // Value from 0 to 255 + +#define PREHEAT_3_LABEL "PETG" +#define PREHEAT_3_TEMP_HOTEND 220 +#define PREHEAT_3_TEMP_BED 45 +#define PREHEAT_3_TEMP_CHAMBER 35 +#define PREHEAT_3_FAN_SPEED 255 // Value from 0 to 255 + +#define PREHEAT_4_LABEL "Nylon" +#define PREHEAT_4_TEMP_HOTEND 230 +#define PREHEAT_4_TEMP_BED 45 +#define PREHEAT_4_TEMP_CHAMBER 35 +#define PREHEAT_4_FAN_SPEED 255 // Value from 0 to 255 /** * Nozzle Park @@ -1728,7 +1742,7 @@ * P1 Raise the nozzle always to Z-park height. * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. */ -//#define NOZZLE_PARK_FEATURE +#define NOZZLE_PARK_FEATURE #if ENABLED(NOZZLE_PARK_FEATURE) // Specify a park position as { X, Y, Z_raise } @@ -1936,7 +1950,7 @@ * SD Card support is disabled by default. If your controller has an SD slot, * you must uncomment the following option or it won't work. */ -//#define SDSUPPORT +#define SDSUPPORT /** * SD CARD: ENABLE CRC @@ -2006,7 +2020,7 @@ // // Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. // -//#define INDIVIDUAL_AXIS_HOMING_MENU +#define INDIVIDUAL_AXIS_HOMING_MENU // // SPEAKER/BUZZER @@ -2014,7 +2028,7 @@ // If you have a speaker that can produce tones, enable it here. // By default Marlin assumes you have a buzzer with a fixed frequency. // -//#define SPEAKER +#define SPEAKER // // The duration and frequency for the UI feedback sound. @@ -2195,7 +2209,7 @@ // RepRapDiscount FULL GRAPHIC Smart Controller // https://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller // -//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER +#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER // // K.3D Full Graphic Smart Controller diff --git a/config/examples/Creality/CR-10S/BigTreeTech SKR 1.4 Turbo TMC2209/Configuration_adv.h b/config/examples/Creality/CR-10S/BigTreeTech SKR 1.4 Turbo TMC2209/Configuration_adv.h index 5335fa012a..5f28a61abe 100644 --- a/config/examples/Creality/CR-10S/BigTreeTech SKR 1.4 Turbo TMC2209/Configuration_adv.h +++ b/config/examples/Creality/CR-10S/BigTreeTech SKR 1.4 Turbo TMC2209/Configuration_adv.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Creality/CR-10S/BigTreeTech SKR 1.4 Turbo TMC2209" + /** * Configuration_adv.h * @@ -792,7 +794,7 @@ * differs, a mode set eeprom write will be completed at initialization. * Use the option below to force an eeprom write to a V3.1 probe regardless. */ - //#define BLTOUCH_SET_5V_MODE + #define BLTOUCH_SET_5V_MODE /** * Safety: Activate if connecting a probe with an unknown voltage mode. @@ -867,7 +869,7 @@ // On a 300mm bed a 5% grade would give a misalignment of ~1.5cm #define G34_MAX_GRADE 5 // (%) Maximum incline that G34 will handle - #define Z_STEPPER_ALIGN_ITERATIONS 5 // Number of iterations to apply during alignment + #define Z_STEPPER_ALIGN_ITERATIONS 3 // Number of iterations to apply during alignment #define Z_STEPPER_ALIGN_ACC 0.02 // Stop iterating early if the accuracy is better than this #define RESTORE_LEVELING_AFTER_G34 // Restore leveling after G34 is done? // After G34, re-home Z (G28 Z) or just calculate it from the last probe heights? @@ -882,7 +884,7 @@ #if ENABLED(ASSISTED_TRAMMING) // Define positions for probe points. - #define TRAMMING_POINT_XY { { 20, 20 }, { 180, 20 }, { 180, 180 }, { 20, 180 } } + #define TRAMMING_POINT_XY { { 20, 20 }, { 280, 20 }, { 280, 280 }, { 20, 280 } } // Define position names for probe points. #define TRAMMING_POINT_NAME_1 "Front-Left" @@ -1175,7 +1177,7 @@ #endif // Include a page of printer information in the LCD Main Menu - //#define LCD_INFO_MENU + #define LCD_INFO_MENU #if ENABLED(LCD_INFO_MENU) //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages #endif @@ -1229,7 +1231,7 @@ #endif // Scroll a longer status message into view - //#define STATUS_MESSAGE_SCROLLING + #define STATUS_MESSAGE_SCROLLING // On the Info Screen, display XY with one decimal place when possible //#define LCD_DECIMAL_SMALL_XY @@ -1301,7 +1303,7 @@ //#define BROWSE_MEDIA_ON_INSERT // Open the file browser when media is inserted - #define EVENT_GCODE_SD_ABORT "G28XY" // G-code to run on SD Abort Print (e.g., "G28XY" or "G27") + #define EVENT_GCODE_SD_ABORT "G27" // G-code to run on SD Abort Print (e.g., "G28XY" or "G27") #if ENABLED(PRINTER_EVENT_LEDS) #define PE_LEDS_COMPLETED_TIME (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination @@ -1361,15 +1363,15 @@ * - SDSORT_CACHE_NAMES will retain the sorted file listing in RAM. (Expensive!) * - SDSORT_DYNAMIC_RAM only uses RAM when the SD menu is visible. (Use with caution!) */ - //#define SDCARD_SORT_ALPHA + #define SDCARD_SORT_ALPHA // SD Card Sorting options #if ENABLED(SDCARD_SORT_ALPHA) #define SDSORT_LIMIT 40 // Maximum number of sorted items (10-256). Costs 27 bytes each. #define FOLDER_SORTING -1 // -1=above 0=none 1=below #define SDSORT_GCODE false // Allow turning sorting on/off with LCD and M34 G-code. - #define SDSORT_USES_RAM false // Pre-allocate a static array for faster pre-sorting. - #define SDSORT_USES_STACK false // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.) + #define SDSORT_USES_RAM true // Pre-allocate a static array for faster pre-sorting. + #define SDSORT_USES_STACK true // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.) #define SDSORT_CACHE_NAMES false // Keep sorted items in RAM longer for speedy performance. Most expensive option. #define SDSORT_DYNAMIC_RAM false // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use! #define SDSORT_CACHE_VFATS 2 // Maximum number of 13-byte VFAT entries to use for sorting. @@ -1384,7 +1386,7 @@ //#define LONG_FILENAME_HOST_SUPPORT // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES + #define SCROLL_LONG_FILENAMES // Leave the heaters on after Stop Print (not recommended!) //#define SD_ABORT_NO_COOLDOWN @@ -1512,7 +1514,7 @@ */ #if HAS_MARLINUI_U8GLIB // Show SD percentage next to the progress bar - //#define DOGM_SD_PERCENT + #define DOGM_SD_PERCENT // Save many cycles by drawing a hollow frame or no frame on the Info Screen //#define XYZ_NO_FRAME @@ -1790,7 +1792,7 @@ * * Warning: Does not respect endstops! */ -//#define BABYSTEPPING +#define BABYSTEPPING #if ENABLED(BABYSTEPPING) //#define INTEGRATED_BABYSTEPPING // EXPERIMENTAL integration of babystepping into the Stepper ISR //#define BABYSTEP_WITHOUT_HOMING @@ -1798,10 +1800,10 @@ //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way //#define BABYSTEP_MILLIMETER_UNITS // Specify BABYSTEP_MULTIPLICATOR_(XY|Z) in mm instead of micro-steps - #define BABYSTEP_MULTIPLICATOR_Z 1 // (steps or mm) Steps or millimeter distance for each Z babystep - #define BABYSTEP_MULTIPLICATOR_XY 1 // (steps or mm) Steps or millimeter distance for each XY babystep + #define BABYSTEP_MULTIPLICATOR_Z 5 // (steps or mm) Steps or millimeter distance for each Z babystep + #define BABYSTEP_MULTIPLICATOR_XY 5 // (steps or mm) Steps or millimeter distance for each XY babystep - //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. + #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. // Note: Extra time may be added to mitigate controller latency. @@ -2141,7 +2143,7 @@ * Currently handles M108, M112, M410, M876 * NOTE: Not yet implemented for all platforms. */ -//#define EMERGENCY_PARSER +#define EMERGENCY_PARSER /** * Realtime Reporting (requires EMERGENCY_PARSER) @@ -2170,7 +2172,7 @@ //#define NO_TIMEOUTS 1000 // Milliseconds // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. -//#define ADVANCED_OK +#define ADVANCED_OK // Printrun may have trouble receiving long strings all at once. // This option inserts short delays between lines of serial output. @@ -2311,28 +2313,28 @@ * * Enable PARK_HEAD_ON_PAUSE to add the G-code M125 Pause and Park. */ -//#define ADVANCED_PAUSE_FEATURE +#define ADVANCED_PAUSE_FEATURE #if ENABLED(ADVANCED_PAUSE_FEATURE) #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. - #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. + #define PAUSE_PARK_RETRACT_LENGTH 4 // (mm) Initial retract. // This short retract is done immediately, before parking the nozzle. - #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast. + #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 41 // (mm/s) Unload filament feedrate. This can be pretty fast. #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload. + #define FILAMENT_CHANGE_UNLOAD_LENGTH 430 // (mm) The length of filament for a complete unload. // For Bowden, the full length of the tube and nozzle. // For direct drive, the full length of the nozzle. // Set to 0 for manual unloading. #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE 6 // (mm/s) Slow move when starting load. #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 0 // (mm) Slow length, to allow time to insert material. // 0 to disable start loading and skip to fast load only - #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast. + #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 41 // (mm/s) Load filament feedrate. This can be pretty fast. #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle. + #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 430 // (mm) Load length of filament, from extruder gear to nozzle. // For Bowden, the full length of the tube and nozzle. // For direct drive, the full length of the nozzle. //#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted. #define ADVANCED_PAUSE_PURGE_FEEDRATE 3 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate. - #define ADVANCED_PAUSE_PURGE_LENGTH 50 // (mm) Length to extrude after loading. + #define ADVANCED_PAUSE_PURGE_LENGTH 20 // (mm) Length to extrude after loading. // Set to 0 for manual extrusion. // Filament can be extruded repeatedly from the Filament Change menu // until extrusion is consistent, and to purge old filament. @@ -2340,17 +2342,17 @@ //#define ADVANCED_PAUSE_FANS_PAUSE // Turn off print-cooling fans while the machine is paused. // Filament Unload does a Retract, Delay, and Purge first: - #define FILAMENT_UNLOAD_PURGE_RETRACT 13 // (mm) Unload initial retract length. + #define FILAMENT_UNLOAD_PURGE_RETRACT 4 // (mm) Unload initial retract length. #define FILAMENT_UNLOAD_PURGE_DELAY 5000 // (ms) Delay for the filament to cool after retract. - #define FILAMENT_UNLOAD_PURGE_LENGTH 8 // (mm) An unretract is done, then this length is purged. + #define FILAMENT_UNLOAD_PURGE_LENGTH 0 // (mm) An unretract is done, then this length is purged. #define FILAMENT_UNLOAD_PURGE_FEEDRATE 25 // (mm/s) feedrate to purge before unload #define PAUSE_PARK_NOZZLE_TIMEOUT 45 // (seconds) Time limit before the nozzle is turned off for safety. - #define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed. + #define FILAMENT_CHANGE_ALERT_BEEPS 6 // Number of alert beeps to play when a response is needed. #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change. - //#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. - //#define HOME_BEFORE_FILAMENT_CHANGE // If needed, home before parking for filament change + #define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. + #define HOME_BEFORE_FILAMENT_CHANGE // If needed, home before parking for filament change //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) @@ -2493,10 +2495,10 @@ #define INTERPOLATE true #if AXIS_IS_TMC(X) - #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. + #define X_CURRENT 650 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for sensorless homing #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 + #define X_RSENSE 0.062 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis #endif @@ -2511,10 +2513,10 @@ #endif #if AXIS_IS_TMC(Y) - #define Y_CURRENT 800 + #define Y_CURRENT 650 #define Y_CURRENT_HOME Y_CURRENT #define Y_MICROSTEPS 16 - #define Y_RSENSE 0.11 + #define Y_RSENSE 0.062 #define Y_CHAIN_POS -1 //#define Y_INTERPOLATE true #endif @@ -2529,10 +2531,10 @@ #endif #if AXIS_IS_TMC(Z) - #define Z_CURRENT 800 + #define Z_CURRENT 580 #define Z_CURRENT_HOME Z_CURRENT #define Z_MICROSTEPS 16 - #define Z_RSENSE 0.11 + #define Z_RSENSE 0.062 #define Z_CHAIN_POS -1 //#define Z_INTERPOLATE true #endif @@ -2565,9 +2567,9 @@ #endif #if AXIS_IS_TMC(E0) - #define E0_CURRENT 800 + #define E0_CURRENT 650 #define E0_MICROSTEPS 16 - #define E0_RSENSE 0.11 + #define E0_RSENSE 0.062 #define E0_CHAIN_POS -1 //#define E0_INTERPOLATE true #endif @@ -2575,7 +2577,7 @@ #if AXIS_IS_TMC(E1) #define E1_CURRENT 800 #define E1_MICROSTEPS E0_MICROSTEPS - #define E1_RSENSE 0.11 + #define E1_RSENSE 0.062 #define E1_CHAIN_POS -1 //#define E1_INTERPOLATE true #endif @@ -2583,7 +2585,7 @@ #if AXIS_IS_TMC(E2) #define E2_CURRENT 800 #define E2_MICROSTEPS E0_MICROSTEPS - #define E2_RSENSE 0.11 + #define E2_RSENSE 0.062 #define E2_CHAIN_POS -1 //#define E2_INTERPOLATE true #endif @@ -2748,7 +2750,7 @@ * M912 - Clear stepper driver overtemperature pre-warn condition flag. * M122 - Report driver parameters (Requires TMC_DEBUG) */ - //#define MONITOR_DRIVER_STATUS + #define MONITOR_DRIVER_STATUS #if ENABLED(MONITOR_DRIVER_STATUS) #define CURRENT_STEP_DOWN 50 // [mA] @@ -2845,7 +2847,7 @@ * Enable M122 debugging command for TMC stepper drivers. * M122 S0/1 will enable continuous reporting. */ - //#define TMC_DEBUG + #define TMC_DEBUG /** * You can set your own advanced settings by filling in predefined functions. @@ -3474,7 +3476,7 @@ //#define NO_WORKSPACE_OFFSETS // Extra options for the M114 "Current Position" report -//#define M114_DETAIL // Use 'M114` for details to check planner calculations +#define M114_DETAIL // Use 'M114` for details to check planner calculations //#define M114_REALTIME // Real current position based on forward kinematics //#define M114_LEGACY // M114 used to synchronize on every call. Enable if needed. diff --git a/config/examples/Creality/CR-10S/BigTreeTech SKR Mini E3 2.0/Configuration.h b/config/examples/Creality/CR-10S/BigTreeTech SKR Mini E3 2.0/Configuration.h index 78c2dc9160..ad43ab9110 100644 --- a/config/examples/Creality/CR-10S/BigTreeTech SKR Mini E3 2.0/Configuration.h +++ b/config/examples/Creality/CR-10S/BigTreeTech SKR Mini E3 2.0/Configuration.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Creality/CR-10S/BigTreeTech SKR Mini E3 2.0" + /** * Configuration.h * @@ -69,7 +71,7 @@ // @section info // Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes. +#define STRING_CONFIG_H_AUTHOR "(Gamester17)" // Who made the changes. //#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) /** @@ -102,14 +104,14 @@ * * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] */ -#define SERIAL_PORT 0 +#define SERIAL_PORT 2 /** * Select a secondary serial port on the board to use for communication with the host. * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] */ -//#define SERIAL_PORT_2 -1 +#define SERIAL_PORT_2 -1 /** * Select a third serial port on the board to use for communication with the host. @@ -127,18 +129,18 @@ * * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ -#define BAUDRATE 250000 +#define BAUDRATE 115200 // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH // Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_RAMPS_14_EFB + #define MOTHERBOARD BOARD_BTT_SKR_MINI_E3_V2_0 #endif // Name displayed in the LCD "Ready" message and Info menu -//#define CUSTOM_MACHINE_NAME "3D Printer" +#define CUSTOM_MACHINE_NAME "CR-10S" // Printer's unique ID, used by some programs to differentiate between machines. // Choose your own or use a service like https://www.uuidgenerator.net/version4 @@ -424,7 +426,7 @@ #define TEMP_SENSOR_5 0 #define TEMP_SENSOR_6 0 #define TEMP_SENSOR_7 0 -#define TEMP_SENSOR_BED 0 +#define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 #define TEMP_SENSOR_COOLER 0 @@ -480,7 +482,7 @@ #define HEATER_5_MAXTEMP 275 #define HEATER_6_MAXTEMP 275 #define HEATER_7_MAXTEMP 275 -#define BED_MAXTEMP 150 +#define BED_MAXTEMP 125 #define CHAMBER_MAXTEMP 60 /** @@ -510,16 +512,17 @@ //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) // Set/get with gcode: M301 E[extruder number, 0-2] + // Creality CR-10 #if ENABLED(PID_PARAMS_PER_HOTEND) // Specify between 1 and HOTENDS values per array. // If fewer than EXTRUDER values are provided, the last element will be repeated. - #define DEFAULT_Kp_LIST { 22.20, 22.20 } - #define DEFAULT_Ki_LIST { 1.08, 1.08 } - #define DEFAULT_Kd_LIST { 114.00, 114.00 } + #define DEFAULT_Kp_LIST { 21.73, 21.73 } + #define DEFAULT_Ki_LIST { 1.54, 1.54 } + #define DEFAULT_Kd_LIST { 76.55, 76.55 } #else - #define DEFAULT_Kp 22.20 - #define DEFAULT_Ki 1.08 - #define DEFAULT_Kd 114.00 + #define DEFAULT_Kp 21.73 + #define DEFAULT_Ki 1.54 + #define DEFAULT_Kd 76.55 #endif #endif // PIDTEMP @@ -634,7 +637,7 @@ * Note: For Bowden Extruders make this large enough to allow load/unload. */ #define PREVENT_LENGTHY_EXTRUDE -#define EXTRUDE_MAXLENGTH 200 +#define EXTRUDE_MAXLENGTH 1000 //=========================================================================== //======================== Thermal Runaway Protection ======================= @@ -743,15 +746,15 @@ * TMC5130, TMC5130_STANDALONE, TMC5160, TMC5160_STANDALONE * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'L6474', 'POWERSTEP01', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2160', 'TMC2160_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC2209', 'TMC2209_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE', 'TMC5160', 'TMC5160_STANDALONE'] */ -#define X_DRIVER_TYPE A4988 -#define Y_DRIVER_TYPE A4988 -#define Z_DRIVER_TYPE A4988 +#define X_DRIVER_TYPE TMC2209 +#define Y_DRIVER_TYPE TMC2209 +#define Z_DRIVER_TYPE TMC2209 //#define X2_DRIVER_TYPE A4988 //#define Y2_DRIVER_TYPE A4988 //#define Z2_DRIVER_TYPE A4988 //#define Z3_DRIVER_TYPE A4988 //#define Z4_DRIVER_TYPE A4988 -#define E0_DRIVER_TYPE A4988 +#define E0_DRIVER_TYPE TMC2209 //#define E1_DRIVER_TYPE A4988 //#define E2_DRIVER_TYPE A4988 //#define E3_DRIVER_TYPE A4988 @@ -806,14 +809,14 @@ * Override with M92 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 500 } +#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 93 } /** * Default Max Feed Rate (mm/s) * Override with M203 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 } +#define DEFAULT_MAX_FEEDRATE { 500, 500, 5, 25 } //#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 #if ENABLED(LIMITED_MAX_FR_EDITING) @@ -826,7 +829,7 @@ * Override with M201 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 } +#define DEFAULT_MAX_ACCELERATION { 500, 500, 100, 5000 } //#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 #if ENABLED(LIMITED_MAX_ACCEL_EDITING) @@ -841,9 +844,9 @@ * M204 R Retract Acceleration * M204 T Travel Acceleration */ -#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves +#define DEFAULT_ACCELERATION 500 // X, Y, Z and E acceleration for printing moves +#define DEFAULT_RETRACT_ACCELERATION 500 // E acceleration for retracts +#define DEFAULT_TRAVEL_ACCELERATION 500 // X, Y, Z acceleration for travel (non printing) moves /** * Default Jerk limits (mm/s) @@ -877,7 +880,7 @@ * https://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html */ #if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.013 // (mm) Distance from real junction edge + #define JUNCTION_DEVIATION_MM 0.08 // (mm) Distance from real junction edge #define JD_HANDLE_SMALL_SEGMENTS // Use curvature estimation instead of just the junction angle // for small segments (< 1mm) with large junction angles (> 135°). #endif @@ -890,7 +893,7 @@ * * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained */ -//#define S_CURVE_ACCELERATION +#define S_CURVE_ACCELERATION //=========================================================================== //============================= Z Probe Options ============================= @@ -1190,14 +1193,14 @@ // @section machine // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR false +#define INVERT_X_DIR true #define INVERT_Y_DIR true #define INVERT_Z_DIR false // @section extruder // For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR false +#define INVERT_E0_DIR true #define INVERT_E1_DIR false #define INVERT_E2_DIR false #define INVERT_E3_DIR false @@ -1232,8 +1235,8 @@ // @section machine // The size of the printable area -#define X_BED_SIZE 200 -#define Y_BED_SIZE 200 +#define X_BED_SIZE 300 +#define Y_BED_SIZE 300 // Travel limits (mm) after homing, corresponding to endstop positions. #define X_MIN_POS 0 @@ -1241,7 +1244,7 @@ #define Z_MIN_POS 0 #define X_MAX_POS X_BED_SIZE #define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 200 +#define Z_MAX_POS 400 /** * Software Endstops @@ -1389,7 +1392,7 @@ //#define AUTO_BED_LEVELING_LINEAR //#define AUTO_BED_LEVELING_BILINEAR //#define AUTO_BED_LEVELING_UBL -//#define MESH_BED_LEVELING +#define MESH_BED_LEVELING /** * Normally G28 leaves leveling disabled on completion. Enable one of @@ -1454,7 +1457,7 @@ #if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR) // Set the number of grid points per dimension. - #define GRID_MAX_POINTS_X 3 + #define GRID_MAX_POINTS_X 5 #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X // Probe along the Y axis, advancing X after each column @@ -1464,7 +1467,7 @@ // Beyond the probed grid, continue the implied tilt? // Default is to maintain the height of the nearest edge. - //#define EXTRAPOLATE_BEYOND_GRID + #define EXTRAPOLATE_BEYOND_GRID // // Experimental Subdivision of the grid by Catmull-Rom method. @@ -1518,16 +1521,16 @@ * Add a bed leveling sub-menu for ABL or MBL. * Include a guided procedure if manual probing is enabled. */ -//#define LCD_BED_LEVELING +#define LCD_BED_LEVELING #if ENABLED(LCD_BED_LEVELING) #define MESH_EDIT_Z_STEP 0.025 // (mm) Step size while manually probing Z axis. #define LCD_PROBE_Z_RANGE 4 // (mm) Z Range centered on Z_MIN_POS for LCD Z adjustment - //#define MESH_EDIT_MENU // Add a menu to edit mesh points + #define MESH_EDIT_MENU // Add a menu to edit mesh points #endif // Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS +#define LEVEL_BED_CORNERS #if ENABLED(LEVEL_BED_CORNERS) #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets @@ -1672,12 +1675,12 @@ * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) */ -//#define EEPROM_SETTINGS // Persistent storage with M500 and M501 +#define EEPROM_SETTINGS // Persistent storage with M500 and M501 //#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. #define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load #if ENABLED(EEPROM_SETTINGS) - //#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. + #define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. #endif // @@ -1706,16 +1709,28 @@ // Preheat Constants - Up to 5 are supported without changes // #define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 180 -#define PREHEAT_1_TEMP_BED 70 +#define PREHEAT_1_TEMP_HOTEND 185 +#define PREHEAT_1_TEMP_BED 45 #define PREHEAT_1_TEMP_CHAMBER 35 -#define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 +#define PREHEAT_1_FAN_SPEED 255 // Value from 0 to 255 #define PREHEAT_2_LABEL "ABS" #define PREHEAT_2_TEMP_HOTEND 240 #define PREHEAT_2_TEMP_BED 110 #define PREHEAT_2_TEMP_CHAMBER 35 -#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 +#define PREHEAT_2_FAN_SPEED 255 // Value from 0 to 255 + +#define PREHEAT_3_LABEL "petG" +#define PREHEAT_3_TEMP_HOTEND 220 +#define PREHEAT_3_TEMP_BED 45 +#define PREHEAT_3_TEMP_CHAMBER 35 +#define PREHEAT_3_FAN_SPEED 255 // Value from 0 to 255 + +#define PREHEAT_4_LABEL "Nylon" +#define PREHEAT_4_TEMP_HOTEND 230 +#define PREHEAT_4_TEMP_BED 45 +#define PREHEAT_4_TEMP_CHAMBER 35 +#define PREHEAT_4_FAN_SPEED 255 // Value from 0 to 255 /** * Nozzle Park @@ -1728,7 +1743,7 @@ * P1 Raise the nozzle always to Z-park height. * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. */ -//#define NOZZLE_PARK_FEATURE +#define NOZZLE_PARK_FEATURE #if ENABLED(NOZZLE_PARK_FEATURE) // Specify a park position as { X, Y, Z_raise } @@ -1921,7 +1936,7 @@ * * :['JAPANESE', 'WESTERN', 'CYRILLIC'] */ -#define DISPLAY_CHARSET_HD44780 JAPANESE +#define DISPLAY_CHARSET_HD44780 WESTERN /** * Info Screen Style (0:Classic, 1:Průša) @@ -1936,7 +1951,7 @@ * SD Card support is disabled by default. If your controller has an SD slot, * you must uncomment the following option or it won't work. */ -//#define SDSUPPORT +#define SDSUPPORT /** * SD CARD: ENABLE CRC @@ -2006,7 +2021,7 @@ // // Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. // -//#define INDIVIDUAL_AXIS_HOMING_MENU +#define INDIVIDUAL_AXIS_HOMING_MENU // // SPEAKER/BUZZER @@ -2287,7 +2302,7 @@ // This is RAMPS-compatible using a single 10-pin connector. // (For CR-10 owners who want to replace the Melzi Creality board but retain the display) // -//#define CR10_STOCKDISPLAY +#define CR10_STOCKDISPLAY // // Ender-2 OEM display, a variant of the MKS_MINI_12864 diff --git a/config/examples/Creality/CR-10S/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h b/config/examples/Creality/CR-10S/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h index 5335fa012a..1f6ad5234b 100644 --- a/config/examples/Creality/CR-10S/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h +++ b/config/examples/Creality/CR-10S/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Creality/CR-10S/BigTreeTech SKR Mini E3 2.0" + /** * Configuration_adv.h * @@ -258,8 +260,8 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 20 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // Seconds + #define WATCH_TEMP_INCREASE 4 // Degrees Celsius #endif /** @@ -461,7 +463,7 @@ * The fan turns on automatically whenever any driver is enabled and turns * off (or reduces to idle speed) shortly after drivers are turned off. */ -//#define USE_CONTROLLER_FAN +#define USE_CONTROLLER_FAN #if ENABLED(USE_CONTROLLER_FAN) //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan //#define CONTROLLER_FAN_USE_Z_ONLY // With this option only the Z axis is considered @@ -470,7 +472,7 @@ #define CONTROLLERFAN_SPEED_ACTIVE 255 // (0-255) Active speed, used when any motor is enabled #define CONTROLLERFAN_SPEED_IDLE 0 // (0-255) Idle speed, used when motors are disabled #define CONTROLLERFAN_IDLE_TIME 60 // (seconds) Extra time to keep the fan running after disabling motors - //#define CONTROLLER_FAN_EDITABLE // Enable M710 configurable settings + #define CONTROLLER_FAN_EDITABLE // Enable M710 configurable settings #if ENABLED(CONTROLLER_FAN_EDITABLE) #define CONTROLLER_FAN_MENU // Enable the Controller Fan submenu #endif @@ -741,7 +743,7 @@ //#define HOMING_BACKOFF_POST_MM { 2, 2, 2 } // (mm) Backoff from endstops after homing -//#define QUICK_HOME // If G28 contains XY do a diagonal move first +#define QUICK_HOME // If G28 contains XY do a diagonal move first //#define HOME_Y_BEFORE_X // If G28 contains XY home Y before X //#define HOME_Z_FIRST // Home Z first. Requires a Z-MIN endstop (not a probe). //#define CODEPENDENT_XY_HOMING // If X/Y can't home without homing Y/X first @@ -867,7 +869,7 @@ // On a 300mm bed a 5% grade would give a misalignment of ~1.5cm #define G34_MAX_GRADE 5 // (%) Maximum incline that G34 will handle - #define Z_STEPPER_ALIGN_ITERATIONS 5 // Number of iterations to apply during alignment + #define Z_STEPPER_ALIGN_ITERATIONS 3 // Number of iterations to apply during alignment #define Z_STEPPER_ALIGN_ACC 0.02 // Stop iterating early if the accuracy is better than this #define RESTORE_LEVELING_AFTER_G34 // Restore leveling after G34 is done? // After G34, re-home Z (G28 Z) or just calculate it from the last probe heights? @@ -882,7 +884,7 @@ #if ENABLED(ASSISTED_TRAMMING) // Define positions for probe points. - #define TRAMMING_POINT_XY { { 20, 20 }, { 180, 20 }, { 180, 180 }, { 20, 180 } } + #define TRAMMING_POINT_XY { { 20, 20 }, { 300, 20 }, { 300, 300 }, { 20, 300 } } // Define position names for probe points. #define TRAMMING_POINT_NAME_1 "Front-Left" @@ -1175,7 +1177,7 @@ #endif // Include a page of printer information in the LCD Main Menu - //#define LCD_INFO_MENU + #define LCD_INFO_MENU #if ENABLED(LCD_INFO_MENU) //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages #endif @@ -1229,13 +1231,13 @@ #endif // Scroll a longer status message into view - //#define STATUS_MESSAGE_SCROLLING + #define STATUS_MESSAGE_SCROLLING // On the Info Screen, display XY with one decimal place when possible //#define LCD_DECIMAL_SMALL_XY // Add an 'M73' G-code to set the current percentage - //#define LCD_SET_PROGRESS_MANUALLY + #define LCD_SET_PROGRESS_MANUALLY // Show the E position (filament used) during printing //#define LCD_SHOW_E_TOTAL @@ -1361,16 +1363,16 @@ * - SDSORT_CACHE_NAMES will retain the sorted file listing in RAM. (Expensive!) * - SDSORT_DYNAMIC_RAM only uses RAM when the SD menu is visible. (Use with caution!) */ - //#define SDCARD_SORT_ALPHA + #define SDCARD_SORT_ALPHA // SD Card Sorting options #if ENABLED(SDCARD_SORT_ALPHA) #define SDSORT_LIMIT 40 // Maximum number of sorted items (10-256). Costs 27 bytes each. #define FOLDER_SORTING -1 // -1=above 0=none 1=below #define SDSORT_GCODE false // Allow turning sorting on/off with LCD and M34 G-code. - #define SDSORT_USES_RAM false // Pre-allocate a static array for faster pre-sorting. + #define SDSORT_USES_RAM true // Pre-allocate a static array for faster pre-sorting. #define SDSORT_USES_STACK false // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.) - #define SDSORT_CACHE_NAMES false // Keep sorted items in RAM longer for speedy performance. Most expensive option. + #define SDSORT_CACHE_NAMES true // Keep sorted items in RAM longer for speedy performance. Most expensive option. #define SDSORT_DYNAMIC_RAM false // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use! #define SDSORT_CACHE_VFATS 2 // Maximum number of 13-byte VFAT entries to use for sorting. // Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM. @@ -1381,10 +1383,10 @@ //#define UTF_FILENAME_SUPPORT // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT + #define LONG_FILENAME_HOST_SUPPORT // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES + #define SCROLL_LONG_FILENAMES // Leave the heaters on after Stop Print (not recommended!) //#define SD_ABORT_NO_COOLDOWN @@ -1394,7 +1396,7 @@ * This feature must be enabled with "M540 S1" or from the LCD menu. * To have any effect, endstops must be enabled during SD printing. */ - //#define SD_ABORT_ON_ENDSTOP_HIT + #define SD_ABORT_ON_ENDSTOP_HIT /** * This option makes it easier to print the same SD Card file again. @@ -1476,7 +1478,7 @@ * * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] */ - //#define SDCARD_CONNECTION LCD + #define SDCARD_CONNECTION ONBOARD // Enable if SD detect is rendered useless (e.g., by using an SD extender) //#define NO_SD_DETECT @@ -1790,7 +1792,7 @@ * * Warning: Does not respect endstops! */ -//#define BABYSTEPPING +#define BABYSTEPPING #if ENABLED(BABYSTEPPING) //#define INTEGRATED_BABYSTEPPING // EXPERIMENTAL integration of babystepping into the Stepper ISR //#define BABYSTEP_WITHOUT_HOMING @@ -1801,7 +1803,7 @@ #define BABYSTEP_MULTIPLICATOR_Z 1 // (steps or mm) Steps or millimeter distance for each Z babystep #define BABYSTEP_MULTIPLICATOR_XY 1 // (steps or mm) Steps or millimeter distance for each XY babystep - //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. + #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. // Note: Extra time may be added to mitigate controller latency. @@ -1837,12 +1839,12 @@ * * See https://marlinfw.org/docs/features/lin_advance.html for full instructions. */ -//#define LIN_ADVANCE +#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) //#define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants - #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed + #define LIN_ADVANCE_K 0.0 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // If enabled, this will generate debug information output over USB. - //#define EXPERIMENTAL_SCURVE // Enable this option to permit S-Curve Acceleration + #define EXPERIMENTAL_SCURVE // Enable this option to permit S-Curve Acceleration #endif // @section leveling @@ -1982,7 +1984,7 @@ // // G2/G3 Arc Support // -#define ARC_SUPPORT // Disable this feature to save ~3226 bytes +//#define ARC_SUPPORT // Disable this feature to save ~3226 bytes #if ENABLED(ARC_SUPPORT) #define MM_PER_ARC_SEGMENT 1 // (mm) Length (or minimum length) of each arc segment //#define ARC_SEGMENTS_PER_R 1 // Max segment length, MM_PER = Min @@ -2141,7 +2143,7 @@ * Currently handles M108, M112, M410, M876 * NOTE: Not yet implemented for all platforms. */ -//#define EMERGENCY_PARSER +#define EMERGENCY_PARSER /** * Realtime Reporting (requires EMERGENCY_PARSER) @@ -2311,14 +2313,14 @@ * * Enable PARK_HEAD_ON_PAUSE to add the G-code M125 Pause and Park. */ -//#define ADVANCED_PAUSE_FEATURE +#define ADVANCED_PAUSE_FEATURE #if ENABLED(ADVANCED_PAUSE_FEATURE) #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. // This short retract is done immediately, before parking the nozzle. #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast. #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload. + #define FILAMENT_CHANGE_UNLOAD_LENGTH 400 // (mm) The length of filament for a complete unload. // For Bowden, the full length of the tube and nozzle. // For direct drive, the full length of the nozzle. // Set to 0 for manual unloading. @@ -2327,7 +2329,7 @@ // 0 to disable start loading and skip to fast load only #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast. #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle. + #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 350 // (mm) Load length of filament, from extruder gear to nozzle. // For Bowden, the full length of the tube and nozzle. // For direct drive, the full length of the nozzle. //#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted. @@ -2349,10 +2351,10 @@ #define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed. #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change. - //#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. - //#define HOME_BEFORE_FILAMENT_CHANGE // If needed, home before parking for filament change + #define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. + #define HOME_BEFORE_FILAMENT_CHANGE // If needed, home before parking for filament change - //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. + #define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) #endif @@ -2493,8 +2495,8 @@ #define INTERPOLATE true #if AXIS_IS_TMC(X) - #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. - #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for sensorless homing + #define X_CURRENT 580 // (mA) RMS current. Multiply by 1.414 for peak current. + #define X_CURRENT_HOME (X_CURRENT/2) // (mA) RMS current for sensorless homing #define X_MICROSTEPS 16 // 0..256 #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... @@ -2511,8 +2513,8 @@ #endif #if AXIS_IS_TMC(Y) - #define Y_CURRENT 800 - #define Y_CURRENT_HOME Y_CURRENT + #define Y_CURRENT 580 + #define Y_CURRENT_HOME (Y_CURRENT/2) #define Y_MICROSTEPS 16 #define Y_RSENSE 0.11 #define Y_CHAIN_POS -1 @@ -2529,7 +2531,7 @@ #endif #if AXIS_IS_TMC(Z) - #define Z_CURRENT 800 + #define Z_CURRENT 580 #define Z_CURRENT_HOME Z_CURRENT #define Z_MICROSTEPS 16 #define Z_RSENSE 0.11 @@ -2565,7 +2567,7 @@ #endif #if AXIS_IS_TMC(E0) - #define E0_CURRENT 800 + #define E0_CURRENT 650 #define E0_MICROSTEPS 16 #define E0_RSENSE 0.11 #define E0_CHAIN_POS -1 @@ -2670,15 +2672,15 @@ * Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers * on the same serial port, either here or in your board's pins file. */ - //#define X_SLAVE_ADDRESS 0 - //#define Y_SLAVE_ADDRESS 0 - //#define Z_SLAVE_ADDRESS 0 + #define X_SLAVE_ADDRESS 0 + #define Y_SLAVE_ADDRESS 2 + #define Z_SLAVE_ADDRESS 1 //#define X2_SLAVE_ADDRESS 0 //#define Y2_SLAVE_ADDRESS 0 //#define Z2_SLAVE_ADDRESS 0 //#define Z3_SLAVE_ADDRESS 0 //#define Z4_SLAVE_ADDRESS 0 - //#define E0_SLAVE_ADDRESS 0 + #define E0_SLAVE_ADDRESS 3 //#define E1_SLAVE_ADDRESS 0 //#define E2_SLAVE_ADDRESS 0 //#define E3_SLAVE_ADDRESS 0 @@ -2811,16 +2813,16 @@ #if EITHER(SENSORLESS_HOMING, SENSORLESS_PROBING) // TMC2209: 0...255. TMC2130: -64...63 - #define X_STALL_SENSITIVITY 8 + #define X_STALL_SENSITIVITY 75 #define X2_STALL_SENSITIVITY X_STALL_SENSITIVITY - #define Y_STALL_SENSITIVITY 8 + #define Y_STALL_SENSITIVITY 75 #define Y2_STALL_SENSITIVITY Y_STALL_SENSITIVITY //#define Z_STALL_SENSITIVITY 8 //#define Z2_STALL_SENSITIVITY Z_STALL_SENSITIVITY //#define Z3_STALL_SENSITIVITY Z_STALL_SENSITIVITY //#define Z4_STALL_SENSITIVITY Z_STALL_SENSITIVITY //#define SPI_ENDSTOPS // TMC2130 only - //#define IMPROVE_HOMING_RELIABILITY + #define IMPROVE_HOMING_RELIABILITY #endif /** @@ -2839,7 +2841,7 @@ * Beta feature! * Create a 50/50 square wave step pulse optimal for stepper drivers. */ - //#define SQUARE_WAVE_STEPPING + #define SQUARE_WAVE_STEPPING /** * Enable M122 debugging command for TMC stepper drivers. diff --git a/config/examples/Creality/CR-10S/BigTreeTech SKR Pro v1.2/Configuration.h b/config/examples/Creality/CR-10S/BigTreeTech SKR Pro v1.2/Configuration.h index 78c2dc9160..dd13148b57 100644 --- a/config/examples/Creality/CR-10S/BigTreeTech SKR Pro v1.2/Configuration.h +++ b/config/examples/Creality/CR-10S/BigTreeTech SKR Pro v1.2/Configuration.h @@ -1,6 +1,6 @@ /** * Marlin 3D Printer Firmware - * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * Copyright (c) 2021 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * * Based on Sprinter and grbl. * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Creality/CR-10S/BigTreeTech SKR Pro v1.2" + /** * Configuration.h * @@ -69,7 +71,7 @@ // @section info // Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes. +#define STRING_CONFIG_H_AUTHOR "(vic10us, d3d config)" // Who made the changes. //#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) /** @@ -87,10 +89,10 @@ #define SHOW_BOOTSCREEN // Show the bitmap in Marlin/_Bootscreen.h on startup. -//#define SHOW_CUSTOM_BOOTSCREEN +#define SHOW_CUSTOM_BOOTSCREEN // Show the bitmap in Marlin/_Statusscreen.h on the status screen. -//#define CUSTOM_STATUS_SCREEN_IMAGE +#define CUSTOM_STATUS_SCREEN_IMAGE // @section machine @@ -102,14 +104,14 @@ * * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] */ -#define SERIAL_PORT 0 +#define SERIAL_PORT -1 /** * Select a secondary serial port on the board to use for communication with the host. * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] */ -//#define SERIAL_PORT_2 -1 +#define SERIAL_PORT_2 1 /** * Select a third serial port on the board to use for communication with the host. @@ -134,11 +136,11 @@ // Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_RAMPS_14_EFB + #define MOTHERBOARD BOARD_BTT_SKR_PRO_V1_2 #endif // Name displayed in the LCD "Ready" message and Info menu -//#define CUSTOM_MACHINE_NAME "3D Printer" +#define CUSTOM_MACHINE_NAME "CR-10S" // Printer's unique ID, used by some programs to differentiate between machines. // Choose your own or use a service like https://www.uuidgenerator.net/version4 @@ -424,7 +426,7 @@ #define TEMP_SENSOR_5 0 #define TEMP_SENSOR_6 0 #define TEMP_SENSOR_7 0 -#define TEMP_SENSOR_BED 0 +#define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 #define TEMP_SENSOR_COOLER 0 @@ -634,7 +636,7 @@ * Note: For Bowden Extruders make this large enough to allow load/unload. */ #define PREVENT_LENGTHY_EXTRUDE -#define EXTRUDE_MAXLENGTH 200 +#define EXTRUDE_MAXLENGTH 435 //=========================================================================== //======================== Thermal Runaway Protection ======================= @@ -743,15 +745,15 @@ * TMC5130, TMC5130_STANDALONE, TMC5160, TMC5160_STANDALONE * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'L6474', 'POWERSTEP01', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2160', 'TMC2160_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC2209', 'TMC2209_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE', 'TMC5160', 'TMC5160_STANDALONE'] */ -#define X_DRIVER_TYPE A4988 -#define Y_DRIVER_TYPE A4988 -#define Z_DRIVER_TYPE A4988 +#define X_DRIVER_TYPE TMC2209 +#define Y_DRIVER_TYPE TMC2209 +#define Z_DRIVER_TYPE TMC2209 //#define X2_DRIVER_TYPE A4988 //#define Y2_DRIVER_TYPE A4988 -//#define Z2_DRIVER_TYPE A4988 +#define Z2_DRIVER_TYPE TMC2209 //#define Z3_DRIVER_TYPE A4988 //#define Z4_DRIVER_TYPE A4988 -#define E0_DRIVER_TYPE A4988 +#define E0_DRIVER_TYPE TMC2209 //#define E1_DRIVER_TYPE A4988 //#define E2_DRIVER_TYPE A4988 //#define E3_DRIVER_TYPE A4988 @@ -806,14 +808,14 @@ * Override with M92 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 500 } +#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 95 } /** * Default Max Feed Rate (mm/s) * Override with M203 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 } +#define DEFAULT_MAX_FEEDRATE { 2500, 2500, 100, 25 } //#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 #if ENABLED(LIMITED_MAX_FR_EDITING) @@ -826,7 +828,7 @@ * Override with M201 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 } +#define DEFAULT_MAX_ACCELERATION { 500, 500, 100, 5000 } //#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 #if ENABLED(LIMITED_MAX_ACCEL_EDITING) @@ -841,9 +843,9 @@ * M204 R Retract Acceleration * M204 T Travel Acceleration */ -#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves +#define DEFAULT_ACCELERATION 600 // X, Y, Z and E acceleration for printing moves +#define DEFAULT_RETRACT_ACCELERATION 1000 // E acceleration for retracts +#define DEFAULT_TRAVEL_ACCELERATION 800 // X, Y, Z acceleration for travel (non printing) moves /** * Default Jerk limits (mm/s) @@ -857,7 +859,7 @@ #if ENABLED(CLASSIC_JERK) #define DEFAULT_XJERK 10.0 #define DEFAULT_YJERK 10.0 - #define DEFAULT_ZJERK 0.3 + #define DEFAULT_ZJERK 0.4 //#define TRAVEL_EXTRA_XYJERK 0.0 // Additional jerk allowance for all travel moves @@ -877,7 +879,7 @@ * https://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html */ #if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.013 // (mm) Distance from real junction edge + #define JUNCTION_DEVIATION_MM 0.067 // (mm) Distance from real junction edge #define JD_HANDLE_SMALL_SEGMENTS // Use curvature estimation instead of just the junction angle // for small segments (< 1mm) with large junction angles (> 135°). #endif @@ -906,10 +908,10 @@ * The probe replaces the Z-MIN endstop and is used for Z homing. * (Automatically enables USE_PROBE_FOR_Z_HOMING.) */ -#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN +//#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN // Force the use of the probe for Z-axis homing -//#define USE_PROBE_FOR_Z_HOMING +#define USE_PROBE_FOR_Z_HOMING /** * Z_MIN_PROBE_PIN @@ -926,7 +928,7 @@ * - normally-closed switches to GND and D32. * - normally-open switches to 5V and D32. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +#define Z_MIN_PROBE_PIN PA2 // Pin 32 is the RAMPS default /** * Probe Type @@ -963,7 +965,7 @@ /** * The BLTouch probe uses a Hall effect sensor and emulates a servo. */ -//#define BLTOUCH +#define BLTOUCH /** * Touch-MI Probe by hotends.fr @@ -1055,7 +1057,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +#define NOZZLE_TO_PROBE_OFFSET { -38, -8, -0.412 } // Most probes should stay away from the edges of the bed, but // with NOZZLE_AS_PROBE this can be negative for a wider probing area. @@ -1191,8 +1193,8 @@ // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR false -#define INVERT_Y_DIR true -#define INVERT_Z_DIR false +#define INVERT_Y_DIR false +#define INVERT_Z_DIR true // @section extruder @@ -1232,16 +1234,16 @@ // @section machine // The size of the printable area -#define X_BED_SIZE 200 -#define Y_BED_SIZE 200 +#define X_BED_SIZE 296 +#define Y_BED_SIZE 298 // Travel limits (mm) after homing, corresponding to endstop positions. -#define X_MIN_POS 0 -#define Y_MIN_POS 0 +#define X_MIN_POS 4 +#define Y_MIN_POS 2 #define Z_MIN_POS 0 -#define X_MAX_POS X_BED_SIZE -#define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 200 +#define X_MAX_POS 319 +#define Y_MAX_POS 306 +#define Z_MAX_POS 400 /** * Software Endstops @@ -1257,7 +1259,7 @@ #if ENABLED(MIN_SOFTWARE_ENDSTOPS) #define MIN_SOFTWARE_ENDSTOP_X #define MIN_SOFTWARE_ENDSTOP_Y - #define MIN_SOFTWARE_ENDSTOP_Z + //#define MIN_SOFTWARE_ENDSTOP_Z #endif // Max software endstops constrain movement within maximum coordinate bounds @@ -1285,7 +1287,7 @@ * RAMPS-based boards use SERVO3_PIN for the first runout sensor. * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. */ -//#define FILAMENT_RUNOUT_SENSOR +#define FILAMENT_RUNOUT_SENSOR #if ENABLED(FILAMENT_RUNOUT_SENSOR) #define FIL_RUNOUT_ENABLED_DEFAULT true // Enable the sensor on startup. Override with M412 followed by M500. #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. @@ -1387,7 +1389,7 @@ */ //#define AUTO_BED_LEVELING_3POINT //#define AUTO_BED_LEVELING_LINEAR -//#define AUTO_BED_LEVELING_BILINEAR +#define AUTO_BED_LEVELING_BILINEAR //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING @@ -1396,7 +1398,7 @@ * these options to restore the prior leveling state or to always enable * leveling immediately after G28. */ -//#define RESTORE_LEVELING_AFTER_G28 +#define RESTORE_LEVELING_AFTER_G28 //#define ENABLE_LEVELING_AFTER_G28 /** @@ -1438,7 +1440,7 @@ /** * Enable the G26 Mesh Validation Pattern tool. */ - //#define G26_MESH_VALIDATION + #define G26_MESH_VALIDATION #if ENABLED(G26_MESH_VALIDATION) #define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle. #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for G26. @@ -1518,7 +1520,7 @@ * Add a bed leveling sub-menu for ABL or MBL. * Include a guided procedure if manual probing is enabled. */ -//#define LCD_BED_LEVELING +#define LCD_BED_LEVELING #if ENABLED(LCD_BED_LEVELING) #define MESH_EDIT_Z_STEP 0.025 // (mm) Step size while manually probing Z axis. @@ -1527,7 +1529,7 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS +#define LEVEL_BED_CORNERS #if ENABLED(LEVEL_BED_CORNERS) #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets @@ -1574,8 +1576,8 @@ // Manually set the home position. Leave these undefined for automatic settings. // For DELTA this is the top-center of the Cartesian print volume. -//#define MANUAL_X_HOME_POS 0 -//#define MANUAL_Y_HOME_POS 0 +#define MANUAL_X_HOME_POS X_MIN_POS +#define MANUAL_Y_HOME_POS Y_MIN_POS //#define MANUAL_Z_HOME_POS 0 // Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area. @@ -1587,7 +1589,7 @@ // - Move the Z probe (or nozzle) to a defined XY point before Z Homing. // - Prevent Z homing when the Z probe is outside bed area. // -//#define Z_SAFE_HOMING +#define Z_SAFE_HOMING #if ENABLED(Z_SAFE_HOMING) #define Z_SAFE_HOMING_X_POINT X_CENTER // X point for Z homing @@ -1595,7 +1597,7 @@ #endif // Homing speeds (mm/min) -#define HOMING_FEEDRATE_MM_M { (50*60), (50*60), (4*60) } +#define HOMING_FEEDRATE_MM_M { (20*60), (20*60), (8*60) } // Validate that endstops are triggered on homing moves #define VALIDATE_HOMING_ENDSTOPS @@ -1672,7 +1674,7 @@ * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) */ -//#define EEPROM_SETTINGS // Persistent storage with M500 and M501 +#define EEPROM_SETTINGS // Persistent storage with M500 and M501 //#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. #define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load @@ -1706,14 +1708,14 @@ // Preheat Constants - Up to 5 are supported without changes // #define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 180 -#define PREHEAT_1_TEMP_BED 70 +#define PREHEAT_1_TEMP_HOTEND 200 +#define PREHEAT_1_TEMP_BED 50 #define PREHEAT_1_TEMP_CHAMBER 35 #define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 -#define PREHEAT_2_LABEL "ABS" +#define PREHEAT_2_LABEL "PETG" #define PREHEAT_2_TEMP_HOTEND 240 -#define PREHEAT_2_TEMP_BED 110 +#define PREHEAT_2_TEMP_BED 80 #define PREHEAT_2_TEMP_CHAMBER 35 #define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 @@ -1728,11 +1730,11 @@ * P1 Raise the nozzle always to Z-park height. * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. */ -//#define NOZZLE_PARK_FEATURE +#define NOZZLE_PARK_FEATURE #if ENABLED(NOZZLE_PARK_FEATURE) // Specify a park position as { X, Y, Z_raise } - #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 } + #define NOZZLE_PARK_POINT { (X_MIN_POS + 3), (Y_MAX_POS - 3), 10 } //#define NOZZLE_PARK_X_ONLY // X move only is required to park //#define NOZZLE_PARK_Y_ONLY // Y move only is required to park #define NOZZLE_PARK_Z_RAISE_MIN 2 // (mm) Always raise Z by at least this distance @@ -1936,7 +1938,7 @@ * SD Card support is disabled by default. If your controller has an SD slot, * you must uncomment the following option or it won't work. */ -//#define SDSUPPORT +#define SDSUPPORT /** * SD CARD: ENABLE CRC @@ -2014,7 +2016,7 @@ // If you have a speaker that can produce tones, enable it here. // By default Marlin assumes you have a buzzer with a fixed frequency. // -//#define SPEAKER +#define SPEAKER // // The duration and frequency for the UI feedback sound. @@ -2195,7 +2197,7 @@ // RepRapDiscount FULL GRAPHIC Smart Controller // https://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller // -//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER +#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER // // K.3D Full Graphic Smart Controller diff --git a/config/examples/Creality/CR-10S/BigTreeTech SKR Pro v1.2/Configuration_adv.h b/config/examples/Creality/CR-10S/BigTreeTech SKR Pro v1.2/Configuration_adv.h index 5335fa012a..c975b3169d 100644 --- a/config/examples/Creality/CR-10S/BigTreeTech SKR Pro v1.2/Configuration_adv.h +++ b/config/examples/Creality/CR-10S/BigTreeTech SKR Pro v1.2/Configuration_adv.h @@ -1,6 +1,6 @@ /** * Marlin 3D Printer Firmware - * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * Copyright (c) 2021 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * * Based on Sprinter and grbl. * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Creality/CR-10S/BigTreeTech SKR Pro v1.2" + /** * Configuration_adv.h * @@ -2311,28 +2313,28 @@ * * Enable PARK_HEAD_ON_PAUSE to add the G-code M125 Pause and Park. */ -//#define ADVANCED_PAUSE_FEATURE +#define ADVANCED_PAUSE_FEATURE #if ENABLED(ADVANCED_PAUSE_FEATURE) #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. - #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. + #define PAUSE_PARK_RETRACT_LENGTH 4 // (mm) Initial retract. // This short retract is done immediately, before parking the nozzle. - #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast. + #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 41 // (mm/s) Unload filament feedrate. This can be pretty fast. #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload. + #define FILAMENT_CHANGE_UNLOAD_LENGTH 430 // (mm) The length of filament for a complete unload. // For Bowden, the full length of the tube and nozzle. // For direct drive, the full length of the nozzle. // Set to 0 for manual unloading. #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE 6 // (mm/s) Slow move when starting load. #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 0 // (mm) Slow length, to allow time to insert material. // 0 to disable start loading and skip to fast load only - #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast. + #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 41 // (mm/s) Load filament feedrate. This can be pretty fast. #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle. + #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 430 // (mm) Load length of filament, from extruder gear to nozzle. // For Bowden, the full length of the tube and nozzle. // For direct drive, the full length of the nozzle. //#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted. #define ADVANCED_PAUSE_PURGE_FEEDRATE 3 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate. - #define ADVANCED_PAUSE_PURGE_LENGTH 50 // (mm) Length to extrude after loading. + #define ADVANCED_PAUSE_PURGE_LENGTH 20 // (mm) Length to extrude after loading. // Set to 0 for manual extrusion. // Filament can be extruded repeatedly from the Filament Change menu // until extrusion is consistent, and to purge old filament. @@ -2340,17 +2342,17 @@ //#define ADVANCED_PAUSE_FANS_PAUSE // Turn off print-cooling fans while the machine is paused. // Filament Unload does a Retract, Delay, and Purge first: - #define FILAMENT_UNLOAD_PURGE_RETRACT 13 // (mm) Unload initial retract length. + #define FILAMENT_UNLOAD_PURGE_RETRACT 4 // (mm) Unload initial retract length. #define FILAMENT_UNLOAD_PURGE_DELAY 5000 // (ms) Delay for the filament to cool after retract. - #define FILAMENT_UNLOAD_PURGE_LENGTH 8 // (mm) An unretract is done, then this length is purged. + #define FILAMENT_UNLOAD_PURGE_LENGTH 0 // (mm) An unretract is done, then this length is purged. #define FILAMENT_UNLOAD_PURGE_FEEDRATE 25 // (mm/s) feedrate to purge before unload #define PAUSE_PARK_NOZZLE_TIMEOUT 45 // (seconds) Time limit before the nozzle is turned off for safety. - #define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed. + #define FILAMENT_CHANGE_ALERT_BEEPS 6 // Number of alert beeps to play when a response is needed. #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change. - //#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. - //#define HOME_BEFORE_FILAMENT_CHANGE // If needed, home before parking for filament change + #define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. + #define HOME_BEFORE_FILAMENT_CHANGE // If needed, home before parking for filament change //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) @@ -2748,7 +2750,7 @@ * M912 - Clear stepper driver overtemperature pre-warn condition flag. * M122 - Report driver parameters (Requires TMC_DEBUG) */ - //#define MONITOR_DRIVER_STATUS + #define MONITOR_DRIVER_STATUS #if ENABLED(MONITOR_DRIVER_STATUS) #define CURRENT_STEP_DOWN 50 // [mA] @@ -2845,7 +2847,7 @@ * Enable M122 debugging command for TMC stepper drivers. * M122 S0/1 will enable continuous reporting. */ - //#define TMC_DEBUG + #define TMC_DEBUG /** * You can set your own advanced settings by filling in predefined functions. diff --git a/config/examples/Creality/CR-10S/CrealityV1/Configuration.h b/config/examples/Creality/CR-10S/CrealityV1/Configuration.h index 78c2dc9160..22aabe3eeb 100644 --- a/config/examples/Creality/CR-10S/CrealityV1/Configuration.h +++ b/config/examples/Creality/CR-10S/CrealityV1/Configuration.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Creality/CR-10S/CrealityV1" + /** * Configuration.h * @@ -69,7 +71,7 @@ // @section info // Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes. +#define STRING_CONFIG_H_AUTHOR "(printedsolid.com, CR-10S)" // Who made the changes. //#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) /** @@ -87,10 +89,10 @@ #define SHOW_BOOTSCREEN // Show the bitmap in Marlin/_Bootscreen.h on startup. -//#define SHOW_CUSTOM_BOOTSCREEN +#define SHOW_CUSTOM_BOOTSCREEN // Show the bitmap in Marlin/_Statusscreen.h on the status screen. -//#define CUSTOM_STATUS_SCREEN_IMAGE +#define CUSTOM_STATUS_SCREEN_IMAGE // @section machine @@ -127,18 +129,18 @@ * * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ -#define BAUDRATE 250000 +#define BAUDRATE 115200 // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH // Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_RAMPS_14_EFB + #define MOTHERBOARD BOARD_RAMPS_CREALITY #endif // Name displayed in the LCD "Ready" message and Info menu -//#define CUSTOM_MACHINE_NAME "3D Printer" +#define CUSTOM_MACHINE_NAME "CR-10S" // Printer's unique ID, used by some programs to differentiate between machines. // Choose your own or use a service like https://www.uuidgenerator.net/version4 @@ -424,7 +426,7 @@ #define TEMP_SENSOR_5 0 #define TEMP_SENSOR_6 0 #define TEMP_SENSOR_7 0 -#define TEMP_SENSOR_BED 0 +#define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 #define TEMP_SENSOR_COOLER 0 @@ -472,7 +474,7 @@ // Above this temperature the heater will be switched off. // This can protect components from overheating, but NOT from shorts and failures. // (Use MINTEMP for thermistor short/failure protection.) -#define HEATER_0_MAXTEMP 275 +#define HEATER_0_MAXTEMP 250 #define HEATER_1_MAXTEMP 275 #define HEATER_2_MAXTEMP 275 #define HEATER_3_MAXTEMP 275 @@ -480,7 +482,7 @@ #define HEATER_5_MAXTEMP 275 #define HEATER_6_MAXTEMP 275 #define HEATER_7_MAXTEMP 275 -#define BED_MAXTEMP 150 +#define BED_MAXTEMP 120 #define CHAMBER_MAXTEMP 60 /** @@ -634,7 +636,7 @@ * Note: For Bowden Extruders make this large enough to allow load/unload. */ #define PREVENT_LENGTHY_EXTRUDE -#define EXTRUDE_MAXLENGTH 200 +#define EXTRUDE_MAXLENGTH 435 //=========================================================================== //======================== Thermal Runaway Protection ======================= @@ -806,14 +808,14 @@ * Override with M92 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 500 } +#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 95 } /** * Default Max Feed Rate (mm/s) * Override with M203 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 } +#define DEFAULT_MAX_FEEDRATE { 2500, 2500, 100, 25 } //#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 #if ENABLED(LIMITED_MAX_FR_EDITING) @@ -826,7 +828,7 @@ * Override with M201 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 } +#define DEFAULT_MAX_ACCELERATION { 500, 500, 100, 5000 } //#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 #if ENABLED(LIMITED_MAX_ACCEL_EDITING) @@ -841,9 +843,9 @@ * M204 R Retract Acceleration * M204 T Travel Acceleration */ -#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves +#define DEFAULT_ACCELERATION 600 // X, Y, Z and E acceleration for printing moves +#define DEFAULT_RETRACT_ACCELERATION 1000 // E acceleration for retracts +#define DEFAULT_TRAVEL_ACCELERATION 800 // X, Y, Z acceleration for travel (non printing) moves /** * Default Jerk limits (mm/s) @@ -857,7 +859,7 @@ #if ENABLED(CLASSIC_JERK) #define DEFAULT_XJERK 10.0 #define DEFAULT_YJERK 10.0 - #define DEFAULT_ZJERK 0.3 + #define DEFAULT_ZJERK 0.4 //#define TRAVEL_EXTRA_XYJERK 0.0 // Additional jerk allowance for all travel moves @@ -877,7 +879,7 @@ * https://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html */ #if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.013 // (mm) Distance from real junction edge + #define JUNCTION_DEVIATION_MM 0.067 // (mm) Distance from real junction edge #define JD_HANDLE_SMALL_SEGMENTS // Use curvature estimation instead of just the junction angle // for small segments (< 1mm) with large junction angles (> 135°). #endif @@ -940,7 +942,7 @@ * Use G29 repeatedly, adjusting the Z height at each point with movement commands * or (with LCD_BED_LEVELING) the LCD controller. */ -//#define PROBE_MANUALLY +#define PROBE_MANUALLY /** * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. @@ -1065,7 +1067,7 @@ #define XY_PROBE_FEEDRATE (133*60) // Feedrate (mm/min) for the first approach when double-probing (MULTIPLE_PROBING == 2) -#define Z_PROBE_FEEDRATE_FAST (4*60) +#define Z_PROBE_FEEDRATE_FAST (8*60) // Feedrate (mm/min) for the "accurate" probe of each point #define Z_PROBE_FEEDRATE_SLOW (Z_PROBE_FEEDRATE_FAST / 2) @@ -1191,8 +1193,8 @@ // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR false -#define INVERT_Y_DIR true -#define INVERT_Z_DIR false +#define INVERT_Y_DIR false +#define INVERT_Z_DIR true // @section extruder @@ -1232,16 +1234,16 @@ // @section machine // The size of the printable area -#define X_BED_SIZE 200 -#define Y_BED_SIZE 200 +#define X_BED_SIZE 296 // Nozzle is at X4 when homed +#define Y_BED_SIZE 298 // Nozzle is at Y2 when homed // Travel limits (mm) after homing, corresponding to endstop positions. -#define X_MIN_POS 0 -#define Y_MIN_POS 0 +#define X_MIN_POS 4 +#define Y_MIN_POS 2 #define Z_MIN_POS 0 -#define X_MAX_POS X_BED_SIZE -#define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 200 +#define X_MAX_POS 319 // 15mm Extra space on the right end +#define Y_MAX_POS 306 // 4mm Extra space behind the bed +#define Z_MAX_POS 400 /** * Software Endstops @@ -1285,12 +1287,13 @@ * RAMPS-based boards use SERVO3_PIN for the first runout sensor. * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. */ -//#define FILAMENT_RUNOUT_SENSOR +#define FILAMENT_RUNOUT_SENSOR #if ENABLED(FILAMENT_RUNOUT_SENSOR) #define FIL_RUNOUT_ENABLED_DEFAULT true // Enable the sensor on startup. Override with M412 followed by M500. #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. + #define FIL_RUNOUT_PIN 2 // Creality CR10-S stock sensor - #define FIL_RUNOUT_STATE LOW // Pin state indicating that filament is NOT present. + #define FIL_RUNOUT_STATE HIGH // Pin state indicating that filament is NOT present. #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. //#define WATCH_ALL_RUNOUT_SENSORS // Execute runout script on any triggering sensor, not only for the active extruder. @@ -1387,7 +1390,7 @@ */ //#define AUTO_BED_LEVELING_3POINT //#define AUTO_BED_LEVELING_LINEAR -//#define AUTO_BED_LEVELING_BILINEAR +#define AUTO_BED_LEVELING_BILINEAR //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING @@ -1438,7 +1441,7 @@ /** * Enable the G26 Mesh Validation Pattern tool. */ - //#define G26_MESH_VALIDATION + #define G26_MESH_VALIDATION // Enable G26 mesh validation #if ENABLED(G26_MESH_VALIDATION) #define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle. #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for G26. @@ -1518,7 +1521,7 @@ * Add a bed leveling sub-menu for ABL or MBL. * Include a guided procedure if manual probing is enabled. */ -//#define LCD_BED_LEVELING +#define LCD_BED_LEVELING #if ENABLED(LCD_BED_LEVELING) #define MESH_EDIT_Z_STEP 0.025 // (mm) Step size while manually probing Z axis. @@ -1527,7 +1530,7 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS +#define LEVEL_BED_CORNERS #if ENABLED(LEVEL_BED_CORNERS) #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets @@ -1590,12 +1593,12 @@ //#define Z_SAFE_HOMING #if ENABLED(Z_SAFE_HOMING) - #define Z_SAFE_HOMING_X_POINT X_CENTER // X point for Z homing - #define Z_SAFE_HOMING_Y_POINT Y_CENTER // Y point for Z homing + #define Z_SAFE_HOMING_X_POINT 150 // X point for Z homing + #define Z_SAFE_HOMING_Y_POINT 150 // Y point for Z homing #endif // Homing speeds (mm/min) -#define HOMING_FEEDRATE_MM_M { (50*60), (50*60), (4*60) } +#define HOMING_FEEDRATE_MM_M { (20*60), (20*60), (8*60) } // Validate that endstops are triggered on homing moves #define VALIDATE_HOMING_ENDSTOPS @@ -1672,7 +1675,7 @@ * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) */ -//#define EEPROM_SETTINGS // Persistent storage with M500 and M501 +#define EEPROM_SETTINGS // Persistent storage with M500 and M501 //#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. #define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load @@ -1706,14 +1709,14 @@ // Preheat Constants - Up to 5 are supported without changes // #define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 180 -#define PREHEAT_1_TEMP_BED 70 +#define PREHEAT_1_TEMP_HOTEND 205 +#define PREHEAT_1_TEMP_BED 60 #define PREHEAT_1_TEMP_CHAMBER 35 #define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 #define PREHEAT_2_LABEL "ABS" -#define PREHEAT_2_TEMP_HOTEND 240 -#define PREHEAT_2_TEMP_BED 110 +#define PREHEAT_2_TEMP_HOTEND 250 +#define PREHEAT_2_TEMP_BED 80 #define PREHEAT_2_TEMP_CHAMBER 35 #define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 @@ -1728,7 +1731,7 @@ * P1 Raise the nozzle always to Z-park height. * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. */ -//#define NOZZLE_PARK_FEATURE +#define NOZZLE_PARK_FEATURE #if ENABLED(NOZZLE_PARK_FEATURE) // Specify a park position as { X, Y, Z_raise } @@ -1936,7 +1939,7 @@ * SD Card support is disabled by default. If your controller has an SD slot, * you must uncomment the following option or it won't work. */ -//#define SDSUPPORT +#define SDSUPPORT /** * SD CARD: ENABLE CRC @@ -2014,7 +2017,7 @@ // If you have a speaker that can produce tones, enable it here. // By default Marlin assumes you have a buzzer with a fixed frequency. // -//#define SPEAKER +#define SPEAKER // // The duration and frequency for the UI feedback sound. @@ -2195,7 +2198,7 @@ // RepRapDiscount FULL GRAPHIC Smart Controller // https://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller // -//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER +#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER // // K.3D Full Graphic Smart Controller diff --git a/config/examples/Creality/CR-10S/CrealityV1/Configuration_adv.h b/config/examples/Creality/CR-10S/CrealityV1/Configuration_adv.h index 5335fa012a..92ab057fbd 100644 --- a/config/examples/Creality/CR-10S/CrealityV1/Configuration_adv.h +++ b/config/examples/Creality/CR-10S/CrealityV1/Configuration_adv.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Creality/CR-10S/CrealityV1" + /** * Configuration_adv.h * @@ -741,7 +743,7 @@ //#define HOMING_BACKOFF_POST_MM { 2, 2, 2 } // (mm) Backoff from endstops after homing -//#define QUICK_HOME // If G28 contains XY do a diagonal move first +#define QUICK_HOME // If G28 contains XY do a diagonal move first //#define HOME_Y_BEFORE_X // If G28 contains XY home Y before X //#define HOME_Z_FIRST // Home Z first. Requires a Z-MIN endstop (not a probe). //#define CODEPENDENT_XY_HOMING // If X/Y can't home without homing Y/X first @@ -792,7 +794,7 @@ * differs, a mode set eeprom write will be completed at initialization. * Use the option below to force an eeprom write to a V3.1 probe regardless. */ - //#define BLTOUCH_SET_5V_MODE + #define BLTOUCH_SET_5V_MODE /** * Safety: Activate if connecting a probe with an unknown voltage mode. @@ -867,7 +869,7 @@ // On a 300mm bed a 5% grade would give a misalignment of ~1.5cm #define G34_MAX_GRADE 5 // (%) Maximum incline that G34 will handle - #define Z_STEPPER_ALIGN_ITERATIONS 5 // Number of iterations to apply during alignment + #define Z_STEPPER_ALIGN_ITERATIONS 3 // Number of iterations to apply during alignment #define Z_STEPPER_ALIGN_ACC 0.02 // Stop iterating early if the accuracy is better than this #define RESTORE_LEVELING_AFTER_G34 // Restore leveling after G34 is done? // After G34, re-home Z (G28 Z) or just calculate it from the last probe heights? @@ -1175,7 +1177,7 @@ #endif // Include a page of printer information in the LCD Main Menu - //#define LCD_INFO_MENU + #define LCD_INFO_MENU #if ENABLED(LCD_INFO_MENU) //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages #endif @@ -1229,7 +1231,7 @@ #endif // Scroll a longer status message into view - //#define STATUS_MESSAGE_SCROLLING + #define STATUS_MESSAGE_SCROLLING // On the Info Screen, display XY with one decimal place when possible //#define LCD_DECIMAL_SMALL_XY @@ -1301,7 +1303,7 @@ //#define BROWSE_MEDIA_ON_INSERT // Open the file browser when media is inserted - #define EVENT_GCODE_SD_ABORT "G28XY" // G-code to run on SD Abort Print (e.g., "G28XY" or "G27") + #define EVENT_GCODE_SD_ABORT "G27" // G-code to run on SD Abort Print (e.g., "G28XY" or "G27") #if ENABLED(PRINTER_EVENT_LEDS) #define PE_LEDS_COMPLETED_TIME (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination @@ -1361,15 +1363,15 @@ * - SDSORT_CACHE_NAMES will retain the sorted file listing in RAM. (Expensive!) * - SDSORT_DYNAMIC_RAM only uses RAM when the SD menu is visible. (Use with caution!) */ - //#define SDCARD_SORT_ALPHA + #define SDCARD_SORT_ALPHA // SD Card Sorting options #if ENABLED(SDCARD_SORT_ALPHA) #define SDSORT_LIMIT 40 // Maximum number of sorted items (10-256). Costs 27 bytes each. #define FOLDER_SORTING -1 // -1=above 0=none 1=below #define SDSORT_GCODE false // Allow turning sorting on/off with LCD and M34 G-code. - #define SDSORT_USES_RAM false // Pre-allocate a static array for faster pre-sorting. - #define SDSORT_USES_STACK false // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.) + #define SDSORT_USES_RAM true // Pre-allocate a static array for faster pre-sorting. + #define SDSORT_USES_STACK true // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.) #define SDSORT_CACHE_NAMES false // Keep sorted items in RAM longer for speedy performance. Most expensive option. #define SDSORT_DYNAMIC_RAM false // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use! #define SDSORT_CACHE_VFATS 2 // Maximum number of 13-byte VFAT entries to use for sorting. @@ -1384,7 +1386,7 @@ //#define LONG_FILENAME_HOST_SUPPORT // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES + #define SCROLL_LONG_FILENAMES // Leave the heaters on after Stop Print (not recommended!) //#define SD_ABORT_NO_COOLDOWN @@ -1512,7 +1514,7 @@ */ #if HAS_MARLINUI_U8GLIB // Show SD percentage next to the progress bar - //#define DOGM_SD_PERCENT + #define DOGM_SD_PERCENT // Save many cycles by drawing a hollow frame or no frame on the Info Screen //#define XYZ_NO_FRAME @@ -1790,7 +1792,7 @@ * * Warning: Does not respect endstops! */ -//#define BABYSTEPPING +#define BABYSTEPPING #if ENABLED(BABYSTEPPING) //#define INTEGRATED_BABYSTEPPING // EXPERIMENTAL integration of babystepping into the Stepper ISR //#define BABYSTEP_WITHOUT_HOMING @@ -1798,10 +1800,10 @@ //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way //#define BABYSTEP_MILLIMETER_UNITS // Specify BABYSTEP_MULTIPLICATOR_(XY|Z) in mm instead of micro-steps - #define BABYSTEP_MULTIPLICATOR_Z 1 // (steps or mm) Steps or millimeter distance for each Z babystep - #define BABYSTEP_MULTIPLICATOR_XY 1 // (steps or mm) Steps or millimeter distance for each XY babystep + #define BABYSTEP_MULTIPLICATOR_Z 5 // (steps or mm) Steps or millimeter distance for each Z babystep + #define BABYSTEP_MULTIPLICATOR_XY 5 // (steps or mm) Steps or millimeter distance for each XY babystep - //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. + #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. // Note: Extra time may be added to mitigate controller latency. @@ -2141,7 +2143,7 @@ * Currently handles M108, M112, M410, M876 * NOTE: Not yet implemented for all platforms. */ -//#define EMERGENCY_PARSER +#define EMERGENCY_PARSER /** * Realtime Reporting (requires EMERGENCY_PARSER) @@ -2170,7 +2172,7 @@ //#define NO_TIMEOUTS 1000 // Milliseconds // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. -//#define ADVANCED_OK +#define ADVANCED_OK // Printrun may have trouble receiving long strings all at once. // This option inserts short delays between lines of serial output. @@ -2311,28 +2313,28 @@ * * Enable PARK_HEAD_ON_PAUSE to add the G-code M125 Pause and Park. */ -//#define ADVANCED_PAUSE_FEATURE +#define ADVANCED_PAUSE_FEATURE #if ENABLED(ADVANCED_PAUSE_FEATURE) #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. - #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. + #define PAUSE_PARK_RETRACT_LENGTH 4 // (mm) Initial retract. // This short retract is done immediately, before parking the nozzle. - #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast. + #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 41 // (mm/s) Unload filament feedrate. This can be pretty fast. #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload. + #define FILAMENT_CHANGE_UNLOAD_LENGTH 430 // (mm) The length of filament for a complete unload. // For Bowden, the full length of the tube and nozzle. // For direct drive, the full length of the nozzle. // Set to 0 for manual unloading. #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE 6 // (mm/s) Slow move when starting load. #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 0 // (mm) Slow length, to allow time to insert material. // 0 to disable start loading and skip to fast load only - #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast. + #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 41 // (mm/s) Load filament feedrate. This can be pretty fast. #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle. + #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 430 // (mm) Load length of filament, from extruder gear to nozzle. // For Bowden, the full length of the tube and nozzle. // For direct drive, the full length of the nozzle. //#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted. #define ADVANCED_PAUSE_PURGE_FEEDRATE 3 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate. - #define ADVANCED_PAUSE_PURGE_LENGTH 50 // (mm) Length to extrude after loading. + #define ADVANCED_PAUSE_PURGE_LENGTH 20 // (mm) Length to extrude after loading. // Set to 0 for manual extrusion. // Filament can be extruded repeatedly from the Filament Change menu // until extrusion is consistent, and to purge old filament. @@ -2340,17 +2342,17 @@ //#define ADVANCED_PAUSE_FANS_PAUSE // Turn off print-cooling fans while the machine is paused. // Filament Unload does a Retract, Delay, and Purge first: - #define FILAMENT_UNLOAD_PURGE_RETRACT 13 // (mm) Unload initial retract length. + #define FILAMENT_UNLOAD_PURGE_RETRACT 4 // (mm) Unload initial retract length. #define FILAMENT_UNLOAD_PURGE_DELAY 5000 // (ms) Delay for the filament to cool after retract. - #define FILAMENT_UNLOAD_PURGE_LENGTH 8 // (mm) An unretract is done, then this length is purged. + #define FILAMENT_UNLOAD_PURGE_LENGTH 0 // (mm) An unretract is done, then this length is purged. #define FILAMENT_UNLOAD_PURGE_FEEDRATE 25 // (mm/s) feedrate to purge before unload #define PAUSE_PARK_NOZZLE_TIMEOUT 45 // (seconds) Time limit before the nozzle is turned off for safety. - #define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed. + #define FILAMENT_CHANGE_ALERT_BEEPS 6 // Number of alert beeps to play when a response is needed. #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change. - //#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. - //#define HOME_BEFORE_FILAMENT_CHANGE // If needed, home before parking for filament change + #define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. + #define HOME_BEFORE_FILAMENT_CHANGE // If needed, home before parking for filament change //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) @@ -2493,7 +2495,7 @@ #define INTERPOLATE true #if AXIS_IS_TMC(X) - #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. + #define X_CURRENT 650 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for sensorless homing #define X_MICROSTEPS 16 // 0..256 #define X_RSENSE 0.11 @@ -2511,7 +2513,7 @@ #endif #if AXIS_IS_TMC(Y) - #define Y_CURRENT 800 + #define Y_CURRENT 650 #define Y_CURRENT_HOME Y_CURRENT #define Y_MICROSTEPS 16 #define Y_RSENSE 0.11 @@ -2529,7 +2531,7 @@ #endif #if AXIS_IS_TMC(Z) - #define Z_CURRENT 800 + #define Z_CURRENT 580 #define Z_CURRENT_HOME Z_CURRENT #define Z_MICROSTEPS 16 #define Z_RSENSE 0.11 @@ -2565,7 +2567,7 @@ #endif #if AXIS_IS_TMC(E0) - #define E0_CURRENT 800 + #define E0_CURRENT 650 #define E0_MICROSTEPS 16 #define E0_RSENSE 0.11 #define E0_CHAIN_POS -1 @@ -3474,7 +3476,7 @@ //#define NO_WORKSPACE_OFFSETS // Extra options for the M114 "Current Position" report -//#define M114_DETAIL // Use 'M114` for details to check planner calculations +#define M114_DETAIL // Use 'M114` for details to check planner calculations //#define M114_REALTIME // Real current position based on forward kinematics //#define M114_LEGACY // M114 used to synchronize on every call. Enable if needed. diff --git a/config/examples/Creality/CR-20 Pro/Configuration.h b/config/examples/Creality/CR-20 Pro/Configuration.h index 78c2dc9160..d6434413c9 100644 --- a/config/examples/Creality/CR-20 Pro/Configuration.h +++ b/config/examples/Creality/CR-20 Pro/Configuration.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Creality/CR-20 Pro" + /** * Configuration.h * @@ -69,7 +71,7 @@ // @section info // Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes. +#define STRING_CONFIG_H_AUTHOR "(CR-20 Pro)" // Who made the changes. //#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) /** @@ -90,7 +92,7 @@ //#define SHOW_CUSTOM_BOOTSCREEN // Show the bitmap in Marlin/_Statusscreen.h on the status screen. -//#define CUSTOM_STATUS_SCREEN_IMAGE +#define CUSTOM_STATUS_SCREEN_IMAGE // @section machine @@ -127,7 +129,7 @@ * * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ -#define BAUDRATE 250000 +#define BAUDRATE 115200 // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH @@ -138,7 +140,7 @@ #endif // Name displayed in the LCD "Ready" message and Info menu -//#define CUSTOM_MACHINE_NAME "3D Printer" +#define CUSTOM_MACHINE_NAME "CR-20 Pro" // Printer's unique ID, used by some programs to differentiate between machines. // Choose your own or use a service like https://www.uuidgenerator.net/version4 @@ -424,7 +426,7 @@ #define TEMP_SENSOR_5 0 #define TEMP_SENSOR_6 0 #define TEMP_SENSOR_7 0 -#define TEMP_SENSOR_BED 0 +#define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 #define TEMP_SENSOR_COOLER 0 @@ -480,7 +482,7 @@ #define HEATER_5_MAXTEMP 275 #define HEATER_6_MAXTEMP 275 #define HEATER_7_MAXTEMP 275 -#define BED_MAXTEMP 150 +#define BED_MAXTEMP 125 #define CHAMBER_MAXTEMP 60 /** @@ -505,21 +507,22 @@ #define PID_K1 0.95 // Smoothing factor within any PID loop #if ENABLED(PIDTEMP) - //#define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) - //#define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) + #define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) + #define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) // Set/get with gcode: M301 E[extruder number, 0-2] + // Creality Ender-3 #if ENABLED(PID_PARAMS_PER_HOTEND) // Specify between 1 and HOTENDS values per array. // If fewer than EXTRUDER values are provided, the last element will be repeated. - #define DEFAULT_Kp_LIST { 22.20, 22.20 } - #define DEFAULT_Ki_LIST { 1.08, 1.08 } - #define DEFAULT_Kd_LIST { 114.00, 114.00 } + #define DEFAULT_Kp_LIST { 21.73, 21.73 } + #define DEFAULT_Ki_LIST { 1.54, 1.54 } + #define DEFAULT_Kd_LIST { 76.55, 76.55 } #else - #define DEFAULT_Kp 22.20 - #define DEFAULT_Ki 1.08 - #define DEFAULT_Kd 114.00 + #define DEFAULT_Kp 21.73 + #define DEFAULT_Ki 1.54 + #define DEFAULT_Kd 76.55 #endif #endif // PIDTEMP @@ -806,14 +809,14 @@ * Override with M92 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 500 } +#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 97 } /** * Default Max Feed Rate (mm/s) * Override with M203 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 } +#define DEFAULT_MAX_FEEDRATE { 500, 500, 5, 25 } //#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 #if ENABLED(LIMITED_MAX_FR_EDITING) @@ -826,7 +829,7 @@ * Override with M201 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 } +#define DEFAULT_MAX_ACCELERATION { 500, 500, 100, 5000 } //#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 #if ENABLED(LIMITED_MAX_ACCEL_EDITING) @@ -841,9 +844,9 @@ * M204 R Retract Acceleration * M204 T Travel Acceleration */ -#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves +#define DEFAULT_ACCELERATION 500 // X, Y, Z and E acceleration for printing moves +#define DEFAULT_RETRACT_ACCELERATION 500 // E acceleration for retracts +#define DEFAULT_TRAVEL_ACCELERATION 500 // X, Y, Z acceleration for travel (non printing) moves /** * Default Jerk limits (mm/s) @@ -877,7 +880,7 @@ * https://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html */ #if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.013 // (mm) Distance from real junction edge + #define JUNCTION_DEVIATION_MM 0.08 // (mm) Distance from real junction edge #define JD_HANDLE_SMALL_SEGMENTS // Use curvature estimation instead of just the junction angle // for small segments (< 1mm) with large junction angles (> 135°). #endif @@ -963,7 +966,7 @@ /** * The BLTouch probe uses a Hall effect sensor and emulates a servo. */ -//#define BLTOUCH +#define BLTOUCH /** * Touch-MI Probe by hotends.fr @@ -1055,7 +1058,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +#define NOZZLE_TO_PROBE_OFFSET { -43, -5, 0 } // Most probes should stay away from the edges of the bed, but // with NOZZLE_AS_PROBE this can be negative for a wider probing area. @@ -1185,14 +1188,14 @@ // @section extruder #define DISABLE_E false // Disable the extruder when not stepping -#define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled +//#define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled // @section machine // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR false -#define INVERT_Y_DIR true -#define INVERT_Z_DIR false +#define INVERT_Y_DIR false +#define INVERT_Z_DIR true // @section extruder @@ -1232,8 +1235,8 @@ // @section machine // The size of the printable area -#define X_BED_SIZE 200 -#define Y_BED_SIZE 200 +#define X_BED_SIZE 235 +#define Y_BED_SIZE 235 // Travel limits (mm) after homing, corresponding to endstop positions. #define X_MIN_POS 0 @@ -1241,7 +1244,7 @@ #define Z_MIN_POS 0 #define X_MAX_POS X_BED_SIZE #define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 200 +#define Z_MAX_POS 250 /** * Software Endstops @@ -1269,7 +1272,7 @@ #endif #if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS) - //#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD + #define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD #endif /** @@ -1296,6 +1299,8 @@ //#define WATCH_ALL_RUNOUT_SENSORS // Execute runout script on any triggering sensor, not only for the active extruder. // This is automatically enabled for MIXING_EXTRUDERs. + #define FIL_RUNOUT_PIN 2 // Creality CR20-S stock sensor + // Override individually if the runout sensors vary //#define FIL_RUNOUT1_STATE LOW //#define FIL_RUNOUT1_PULLUP @@ -1387,7 +1392,7 @@ */ //#define AUTO_BED_LEVELING_3POINT //#define AUTO_BED_LEVELING_LINEAR -//#define AUTO_BED_LEVELING_BILINEAR +#define AUTO_BED_LEVELING_BILINEAR //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING @@ -1396,7 +1401,7 @@ * these options to restore the prior leveling state or to always enable * leveling immediately after G28. */ -//#define RESTORE_LEVELING_AFTER_G28 +#define RESTORE_LEVELING_AFTER_G28 //#define ENABLE_LEVELING_AFTER_G28 /** @@ -1587,7 +1592,7 @@ // - Move the Z probe (or nozzle) to a defined XY point before Z Homing. // - Prevent Z homing when the Z probe is outside bed area. // -//#define Z_SAFE_HOMING +#define Z_SAFE_HOMING #if ENABLED(Z_SAFE_HOMING) #define Z_SAFE_HOMING_X_POINT X_CENTER // X point for Z homing @@ -1595,7 +1600,7 @@ #endif // Homing speeds (mm/min) -#define HOMING_FEEDRATE_MM_M { (50*60), (50*60), (4*60) } +#define HOMING_FEEDRATE_MM_M { (20*60), (20*60), (4*60) } // Validate that endstops are triggered on homing moves #define VALIDATE_HOMING_ENDSTOPS @@ -1672,7 +1677,7 @@ * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) */ -//#define EEPROM_SETTINGS // Persistent storage with M500 and M501 +#define EEPROM_SETTINGS // Persistent storage with M500 and M501 //#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. #define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load @@ -1706,16 +1711,16 @@ // Preheat Constants - Up to 5 are supported without changes // #define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 180 -#define PREHEAT_1_TEMP_BED 70 +#define PREHEAT_1_TEMP_HOTEND 185 +#define PREHEAT_1_TEMP_BED 45 #define PREHEAT_1_TEMP_CHAMBER 35 -#define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 +#define PREHEAT_1_FAN_SPEED 255 // Value from 0 to 255 #define PREHEAT_2_LABEL "ABS" #define PREHEAT_2_TEMP_HOTEND 240 -#define PREHEAT_2_TEMP_BED 110 +#define PREHEAT_2_TEMP_BED 70 #define PREHEAT_2_TEMP_CHAMBER 35 -#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 +#define PREHEAT_2_FAN_SPEED 255 // Value from 0 to 255 /** * Nozzle Park @@ -1921,7 +1926,7 @@ * * :['JAPANESE', 'WESTERN', 'CYRILLIC'] */ -#define DISPLAY_CHARSET_HD44780 JAPANESE +#define DISPLAY_CHARSET_HD44780 WESTERN /** * Info Screen Style (0:Classic, 1:Průša) @@ -1936,7 +1941,7 @@ * SD Card support is disabled by default. If your controller has an SD slot, * you must uncomment the following option or it won't work. */ -//#define SDSUPPORT +#define SDSUPPORT /** * SD CARD: ENABLE CRC @@ -2261,7 +2266,10 @@ // MKS MINI12864 with graphic controller and SD support // https://reprap.org/wiki/MKS_MINI_12864 // -//#define MKS_MINI_12864 +#define MKS_MINI_12864 +#define LCD_CONTRAST_MIN 140 +#define LCD_CONTRAST_INIT 155 +#define LCD_CONTRAST_MAX 165 // // MKS LCD12864A/B with graphic controller and SD support. Follows MKS_MINI_12864 pinout. diff --git a/config/examples/Creality/CR-20 Pro/Configuration_adv.h b/config/examples/Creality/CR-20 Pro/Configuration_adv.h index 5335fa012a..dca4986f6d 100644 --- a/config/examples/Creality/CR-20 Pro/Configuration_adv.h +++ b/config/examples/Creality/CR-20 Pro/Configuration_adv.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Creality/CR-20 Pro" + /** * Configuration_adv.h * @@ -741,7 +743,7 @@ //#define HOMING_BACKOFF_POST_MM { 2, 2, 2 } // (mm) Backoff from endstops after homing -//#define QUICK_HOME // If G28 contains XY do a diagonal move first +#define QUICK_HOME // If G28 contains XY do a diagonal move first //#define HOME_Y_BEFORE_X // If G28 contains XY home Y before X //#define HOME_Z_FIRST // Home Z first. Requires a Z-MIN endstop (not a probe). //#define CODEPENDENT_XY_HOMING // If X/Y can't home without homing Y/X first @@ -792,7 +794,7 @@ * differs, a mode set eeprom write will be completed at initialization. * Use the option below to force an eeprom write to a V3.1 probe regardless. */ - //#define BLTOUCH_SET_5V_MODE + #define BLTOUCH_SET_5V_MODE /** * Safety: Activate if connecting a probe with an unknown voltage mode. @@ -867,7 +869,7 @@ // On a 300mm bed a 5% grade would give a misalignment of ~1.5cm #define G34_MAX_GRADE 5 // (%) Maximum incline that G34 will handle - #define Z_STEPPER_ALIGN_ITERATIONS 5 // Number of iterations to apply during alignment + #define Z_STEPPER_ALIGN_ITERATIONS 3 // Number of iterations to apply during alignment #define Z_STEPPER_ALIGN_ACC 0.02 // Stop iterating early if the accuracy is better than this #define RESTORE_LEVELING_AFTER_G34 // Restore leveling after G34 is done? // After G34, re-home Z (G28 Z) or just calculate it from the last probe heights? @@ -1175,7 +1177,7 @@ #endif // Include a page of printer information in the LCD Main Menu - //#define LCD_INFO_MENU + #define LCD_INFO_MENU #if ENABLED(LCD_INFO_MENU) //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages #endif @@ -1229,7 +1231,7 @@ #endif // Scroll a longer status message into view - //#define STATUS_MESSAGE_SCROLLING + #define STATUS_MESSAGE_SCROLLING // On the Info Screen, display XY with one decimal place when possible //#define LCD_DECIMAL_SMALL_XY @@ -1384,7 +1386,7 @@ //#define LONG_FILENAME_HOST_SUPPORT // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES + #define SCROLL_LONG_FILENAMES // Leave the heaters on after Stop Print (not recommended!) //#define SD_ABORT_NO_COOLDOWN @@ -1790,7 +1792,7 @@ * * Warning: Does not respect endstops! */ -//#define BABYSTEPPING +#define BABYSTEPPING #if ENABLED(BABYSTEPPING) //#define INTEGRATED_BABYSTEPPING // EXPERIMENTAL integration of babystepping into the Stepper ISR //#define BABYSTEP_WITHOUT_HOMING @@ -1801,7 +1803,7 @@ #define BABYSTEP_MULTIPLICATOR_Z 1 // (steps or mm) Steps or millimeter distance for each Z babystep #define BABYSTEP_MULTIPLICATOR_XY 1 // (steps or mm) Steps or millimeter distance for each XY babystep - //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. + #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. // Note: Extra time may be added to mitigate controller latency. diff --git a/config/examples/Creality/CR-20/Configuration.h b/config/examples/Creality/CR-20/Configuration.h index 78c2dc9160..dccec976f7 100644 --- a/config/examples/Creality/CR-20/Configuration.h +++ b/config/examples/Creality/CR-20/Configuration.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Creality/CR-20" + /** * Configuration.h * @@ -69,7 +71,7 @@ // @section info // Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes. +#define STRING_CONFIG_H_AUTHOR "(m0oml)" // Who made the changes. //#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) /** @@ -127,7 +129,7 @@ * * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ -#define BAUDRATE 250000 +#define BAUDRATE 115200 // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH @@ -138,7 +140,7 @@ #endif // Name displayed in the LCD "Ready" message and Info menu -//#define CUSTOM_MACHINE_NAME "3D Printer" +#define CUSTOM_MACHINE_NAME "CR-20" // Printer's unique ID, used by some programs to differentiate between machines. // Choose your own or use a service like https://www.uuidgenerator.net/version4 @@ -424,7 +426,7 @@ #define TEMP_SENSOR_5 0 #define TEMP_SENSOR_6 0 #define TEMP_SENSOR_7 0 -#define TEMP_SENSOR_BED 0 +#define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 #define TEMP_SENSOR_COOLER 0 @@ -480,7 +482,7 @@ #define HEATER_5_MAXTEMP 275 #define HEATER_6_MAXTEMP 275 #define HEATER_7_MAXTEMP 275 -#define BED_MAXTEMP 150 +#define BED_MAXTEMP 125 #define CHAMBER_MAXTEMP 60 /** @@ -505,21 +507,22 @@ #define PID_K1 0.95 // Smoothing factor within any PID loop #if ENABLED(PIDTEMP) - //#define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) - //#define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) + #define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) + #define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) // Set/get with gcode: M301 E[extruder number, 0-2] + // Creality Ender-3 #if ENABLED(PID_PARAMS_PER_HOTEND) // Specify between 1 and HOTENDS values per array. // If fewer than EXTRUDER values are provided, the last element will be repeated. - #define DEFAULT_Kp_LIST { 22.20, 22.20 } - #define DEFAULT_Ki_LIST { 1.08, 1.08 } - #define DEFAULT_Kd_LIST { 114.00, 114.00 } + #define DEFAULT_Kp_LIST { 21.73, 21.73 } + #define DEFAULT_Ki_LIST { 1.54, 1.54 } + #define DEFAULT_Kd_LIST { 76.55, 76.55 } #else - #define DEFAULT_Kp 22.20 - #define DEFAULT_Ki 1.08 - #define DEFAULT_Kd 114.00 + #define DEFAULT_Kp 21.73 + #define DEFAULT_Ki 1.54 + #define DEFAULT_Kd 76.55 #endif #endif // PIDTEMP @@ -806,14 +809,14 @@ * Override with M92 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 500 } +#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 97 } /** * Default Max Feed Rate (mm/s) * Override with M203 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 } +#define DEFAULT_MAX_FEEDRATE { 500, 500, 5, 25 } //#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 #if ENABLED(LIMITED_MAX_FR_EDITING) @@ -826,7 +829,7 @@ * Override with M201 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 } +#define DEFAULT_MAX_ACCELERATION { 500, 500, 100, 5000 } //#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 #if ENABLED(LIMITED_MAX_ACCEL_EDITING) @@ -841,9 +844,9 @@ * M204 R Retract Acceleration * M204 T Travel Acceleration */ -#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves +#define DEFAULT_ACCELERATION 500 // X, Y, Z and E acceleration for printing moves +#define DEFAULT_RETRACT_ACCELERATION 500 // E acceleration for retracts +#define DEFAULT_TRAVEL_ACCELERATION 500 // X, Y, Z acceleration for travel (non printing) moves /** * Default Jerk limits (mm/s) @@ -877,7 +880,7 @@ * https://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html */ #if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.013 // (mm) Distance from real junction edge + #define JUNCTION_DEVIATION_MM 0.08 // (mm) Distance from real junction edge #define JD_HANDLE_SMALL_SEGMENTS // Use curvature estimation instead of just the junction angle // for small segments (< 1mm) with large junction angles (> 135°). #endif @@ -1185,19 +1188,19 @@ // @section extruder #define DISABLE_E false // Disable the extruder when not stepping -#define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled +//#define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled // @section machine // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR false +#define INVERT_X_DIR true #define INVERT_Y_DIR true #define INVERT_Z_DIR false // @section extruder // For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR false +#define INVERT_E0_DIR true #define INVERT_E1_DIR false #define INVERT_E2_DIR false #define INVERT_E3_DIR false @@ -1232,8 +1235,8 @@ // @section machine // The size of the printable area -#define X_BED_SIZE 200 -#define Y_BED_SIZE 200 +#define X_BED_SIZE 235 +#define Y_BED_SIZE 235 // Travel limits (mm) after homing, corresponding to endstop positions. #define X_MIN_POS 0 @@ -1241,7 +1244,7 @@ #define Z_MIN_POS 0 #define X_MAX_POS X_BED_SIZE #define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 200 +#define Z_MAX_POS 250 /** * Software Endstops @@ -1296,6 +1299,8 @@ //#define WATCH_ALL_RUNOUT_SENSORS // Execute runout script on any triggering sensor, not only for the active extruder. // This is automatically enabled for MIXING_EXTRUDERs. + #define FIL_RUNOUT_PIN 2 // Creality CR20-S stock sensor + // Override individually if the runout sensors vary //#define FIL_RUNOUT1_STATE LOW //#define FIL_RUNOUT1_PULLUP @@ -1595,7 +1600,7 @@ #endif // Homing speeds (mm/min) -#define HOMING_FEEDRATE_MM_M { (50*60), (50*60), (4*60) } +#define HOMING_FEEDRATE_MM_M { (20*60), (20*60), (4*60) } // Validate that endstops are triggered on homing moves #define VALIDATE_HOMING_ENDSTOPS @@ -1672,7 +1677,7 @@ * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) */ -//#define EEPROM_SETTINGS // Persistent storage with M500 and M501 +#define EEPROM_SETTINGS // Persistent storage with M500 and M501 //#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. #define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load @@ -1706,16 +1711,16 @@ // Preheat Constants - Up to 5 are supported without changes // #define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 180 -#define PREHEAT_1_TEMP_BED 70 +#define PREHEAT_1_TEMP_HOTEND 185 +#define PREHEAT_1_TEMP_BED 45 #define PREHEAT_1_TEMP_CHAMBER 35 -#define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 +#define PREHEAT_1_FAN_SPEED 255 // Value from 0 to 255 #define PREHEAT_2_LABEL "ABS" #define PREHEAT_2_TEMP_HOTEND 240 -#define PREHEAT_2_TEMP_BED 110 +#define PREHEAT_2_TEMP_BED 0 #define PREHEAT_2_TEMP_CHAMBER 35 -#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 +#define PREHEAT_2_FAN_SPEED 255 // Value from 0 to 255 /** * Nozzle Park @@ -1921,7 +1926,7 @@ * * :['JAPANESE', 'WESTERN', 'CYRILLIC'] */ -#define DISPLAY_CHARSET_HD44780 JAPANESE +#define DISPLAY_CHARSET_HD44780 WESTERN /** * Info Screen Style (0:Classic, 1:Průša) @@ -1936,7 +1941,7 @@ * SD Card support is disabled by default. If your controller has an SD slot, * you must uncomment the following option or it won't work. */ -//#define SDSUPPORT +#define SDSUPPORT /** * SD CARD: ENABLE CRC @@ -2261,7 +2266,10 @@ // MKS MINI12864 with graphic controller and SD support // https://reprap.org/wiki/MKS_MINI_12864 // -//#define MKS_MINI_12864 +#define MKS_MINI_12864 +#define LCD_CONTRAST_MIN 140 +#define LCD_CONTRAST_INIT 155 +#define LCD_CONTRAST_MAX 165 // // MKS LCD12864A/B with graphic controller and SD support. Follows MKS_MINI_12864 pinout. diff --git a/config/examples/Creality/CR-20/Configuration_adv.h b/config/examples/Creality/CR-20/Configuration_adv.h index 5335fa012a..82d23d88f9 100644 --- a/config/examples/Creality/CR-20/Configuration_adv.h +++ b/config/examples/Creality/CR-20/Configuration_adv.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Creality/CR-20" + /** * Configuration_adv.h * @@ -741,7 +743,7 @@ //#define HOMING_BACKOFF_POST_MM { 2, 2, 2 } // (mm) Backoff from endstops after homing -//#define QUICK_HOME // If G28 contains XY do a diagonal move first +#define QUICK_HOME // If G28 contains XY do a diagonal move first //#define HOME_Y_BEFORE_X // If G28 contains XY home Y before X //#define HOME_Z_FIRST // Home Z first. Requires a Z-MIN endstop (not a probe). //#define CODEPENDENT_XY_HOMING // If X/Y can't home without homing Y/X first @@ -867,7 +869,7 @@ // On a 300mm bed a 5% grade would give a misalignment of ~1.5cm #define G34_MAX_GRADE 5 // (%) Maximum incline that G34 will handle - #define Z_STEPPER_ALIGN_ITERATIONS 5 // Number of iterations to apply during alignment + #define Z_STEPPER_ALIGN_ITERATIONS 3 // Number of iterations to apply during alignment #define Z_STEPPER_ALIGN_ACC 0.02 // Stop iterating early if the accuracy is better than this #define RESTORE_LEVELING_AFTER_G34 // Restore leveling after G34 is done? // After G34, re-home Z (G28 Z) or just calculate it from the last probe heights? @@ -1175,7 +1177,7 @@ #endif // Include a page of printer information in the LCD Main Menu - //#define LCD_INFO_MENU + #define LCD_INFO_MENU #if ENABLED(LCD_INFO_MENU) //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages #endif @@ -1229,7 +1231,7 @@ #endif // Scroll a longer status message into view - //#define STATUS_MESSAGE_SCROLLING + #define STATUS_MESSAGE_SCROLLING // On the Info Screen, display XY with one decimal place when possible //#define LCD_DECIMAL_SMALL_XY @@ -1384,7 +1386,7 @@ //#define LONG_FILENAME_HOST_SUPPORT // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES + #define SCROLL_LONG_FILENAMES // Leave the heaters on after Stop Print (not recommended!) //#define SD_ABORT_NO_COOLDOWN @@ -1790,7 +1792,7 @@ * * Warning: Does not respect endstops! */ -//#define BABYSTEPPING +#define BABYSTEPPING #if ENABLED(BABYSTEPPING) //#define INTEGRATED_BABYSTEPPING // EXPERIMENTAL integration of babystepping into the Stepper ISR //#define BABYSTEP_WITHOUT_HOMING @@ -1801,7 +1803,7 @@ #define BABYSTEP_MULTIPLICATOR_Z 1 // (steps or mm) Steps or millimeter distance for each Z babystep #define BABYSTEP_MULTIPLICATOR_XY 1 // (steps or mm) Steps or millimeter distance for each XY babystep - //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. + #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. // Note: Extra time may be added to mitigate controller latency. diff --git a/config/examples/Creality/CR-6 SE/Configuration.h b/config/examples/Creality/CR-6 SE/Configuration.h index 78c2dc9160..38fe622720 100644 --- a/config/examples/Creality/CR-6 SE/Configuration.h +++ b/config/examples/Creality/CR-6 SE/Configuration.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Creality/CR-6 SE" + /** * Configuration.h * @@ -69,7 +71,7 @@ // @section info // Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes. +#define STRING_CONFIG_H_AUTHOR "CR-6 SE" // Who made the changes. //#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) /** @@ -102,14 +104,14 @@ * * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] */ -#define SERIAL_PORT 0 +#define SERIAL_PORT 1 /** * Select a secondary serial port on the board to use for communication with the host. * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] */ -//#define SERIAL_PORT_2 -1 +//#define SERIAL_PORT_2 3 /** * Select a third serial port on the board to use for communication with the host. @@ -127,14 +129,14 @@ * * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ -#define BAUDRATE 250000 +#define BAUDRATE 115200 // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH // Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_RAMPS_14_EFB + #define MOTHERBOARD BOARD_CREALITY_V452 #endif // Name displayed in the LCD "Ready" message and Info menu @@ -424,7 +426,7 @@ #define TEMP_SENSOR_5 0 #define TEMP_SENSOR_6 0 #define TEMP_SENSOR_7 0 -#define TEMP_SENSOR_BED 0 +#define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 #define TEMP_SENSOR_COOLER 0 @@ -458,7 +460,7 @@ // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. -#define HEATER_0_MINTEMP 5 +#define HEATER_0_MINTEMP 0 #define HEATER_1_MINTEMP 5 #define HEATER_2_MINTEMP 5 #define HEATER_3_MINTEMP 5 @@ -466,7 +468,7 @@ #define HEATER_5_MINTEMP 5 #define HEATER_6_MINTEMP 5 #define HEATER_7_MINTEMP 5 -#define BED_MINTEMP 5 +#define BED_MINTEMP 0 #define CHAMBER_MINTEMP 5 // Above this temperature the heater will be switched off. @@ -480,7 +482,7 @@ #define HEATER_5_MAXTEMP 275 #define HEATER_6_MAXTEMP 275 #define HEATER_7_MAXTEMP 275 -#define BED_MAXTEMP 150 +#define BED_MAXTEMP 120 #define CHAMBER_MAXTEMP 60 /** @@ -517,9 +519,9 @@ #define DEFAULT_Ki_LIST { 1.08, 1.08 } #define DEFAULT_Kd_LIST { 114.00, 114.00 } #else - #define DEFAULT_Kp 22.20 - #define DEFAULT_Ki 1.08 - #define DEFAULT_Kd 114.00 + #define DEFAULT_Kp 14.32 + #define DEFAULT_Ki 0.81 + #define DEFAULT_Kd 63.12 #endif #endif // PIDTEMP @@ -540,7 +542,7 @@ * heater. If your configuration is significantly different than this and you don't understand * the issues involved, don't use bed PID until someone else verifies that your hardware works. */ -//#define PIDTEMPBED +#define PIDTEMPBED //#define BED_LIMIT_SWITCHING @@ -558,9 +560,9 @@ // 120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) // from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) - #define DEFAULT_bedKp 10.00 - #define DEFAULT_bedKi .023 - #define DEFAULT_bedKd 305.4 + #define DEFAULT_bedKp 79.49 + #define DEFAULT_bedKi 1.17 + #define DEFAULT_bedKd 1349.52 // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. #endif // PIDTEMPBED @@ -627,14 +629,14 @@ * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** */ #define PREVENT_COLD_EXTRUSION -#define EXTRUDE_MINTEMP 170 +#define EXTRUDE_MINTEMP 180 /** * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. * Note: For Bowden Extruders make this large enough to allow load/unload. */ #define PREVENT_LENGTHY_EXTRUDE -#define EXTRUDE_MAXLENGTH 200 +#define EXTRUDE_MAXLENGTH 1000 //=========================================================================== //======================== Thermal Runaway Protection ======================= @@ -655,7 +657,7 @@ #define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders #define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed -#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber +//#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber #define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling //=========================================================================== @@ -743,15 +745,15 @@ * TMC5130, TMC5130_STANDALONE, TMC5160, TMC5160_STANDALONE * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'L6474', 'POWERSTEP01', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2160', 'TMC2160_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC2209', 'TMC2209_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE', 'TMC5160', 'TMC5160_STANDALONE'] */ -#define X_DRIVER_TYPE A4988 -#define Y_DRIVER_TYPE A4988 -#define Z_DRIVER_TYPE A4988 +#define X_DRIVER_TYPE TMC2209_STANDALONE +#define Y_DRIVER_TYPE TMC2209_STANDALONE +#define Z_DRIVER_TYPE TMC2209_STANDALONE //#define X2_DRIVER_TYPE A4988 //#define Y2_DRIVER_TYPE A4988 //#define Z2_DRIVER_TYPE A4988 //#define Z3_DRIVER_TYPE A4988 //#define Z4_DRIVER_TYPE A4988 -#define E0_DRIVER_TYPE A4988 +#define E0_DRIVER_TYPE TMC2209_STANDALONE //#define E1_DRIVER_TYPE A4988 //#define E2_DRIVER_TYPE A4988 //#define E3_DRIVER_TYPE A4988 @@ -806,14 +808,14 @@ * Override with M92 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 500 } +#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 93 } /** * Default Max Feed Rate (mm/s) * Override with M203 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 } +#define DEFAULT_MAX_FEEDRATE { 500, 500, 5, 25 } //#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 #if ENABLED(LIMITED_MAX_FR_EDITING) @@ -826,7 +828,7 @@ * Override with M201 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 } +#define DEFAULT_MAX_ACCELERATION { 500, 500, 100, 1000 } //#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 #if ENABLED(LIMITED_MAX_ACCEL_EDITING) @@ -841,9 +843,9 @@ * M204 R Retract Acceleration * M204 T Travel Acceleration */ -#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves +#define DEFAULT_ACCELERATION 500 // X, Y, Z and E acceleration for printing moves +#define DEFAULT_RETRACT_ACCELERATION 1000 // E acceleration for retracts +#define DEFAULT_TRAVEL_ACCELERATION 1000 // X, Y, Z acceleration for travel (non printing) moves /** * Default Jerk limits (mm/s) @@ -877,7 +879,7 @@ * https://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html */ #if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.013 // (mm) Distance from real junction edge + #define JUNCTION_DEVIATION_MM 0.05 // (mm) Distance from real junction edge #define JD_HANDLE_SMALL_SEGMENTS // Use curvature estimation instead of just the junction angle // for small segments (< 1mm) with large junction angles (> 135°). #endif @@ -890,7 +892,7 @@ * * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained */ -//#define S_CURVE_ACCELERATION +#define S_CURVE_ACCELERATION //=========================================================================== //============================= Z Probe Options ============================= @@ -909,7 +911,7 @@ #define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN // Force the use of the probe for Z-axis homing -//#define USE_PROBE_FOR_Z_HOMING +#define USE_PROBE_FOR_Z_HOMING /** * Z_MIN_PROBE_PIN @@ -952,7 +954,7 @@ * Use the nozzle as the probe, as with a conductive * nozzle system or a piezo-electric smart effector. */ -//#define NOZZLE_AS_PROBE +#define NOZZLE_AS_PROBE /** * Z Servo Probe, such as an endstop switch on a rotating arm. @@ -1055,11 +1057,11 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +#define NOZZLE_TO_PROBE_OFFSET { 0, 0, 0.2 } // Most probes should stay away from the edges of the bed, but // with NOZZLE_AS_PROBE this can be negative for a wider probing area. -#define PROBING_MARGIN 10 +#define PROBING_MARGIN 30 // X and Y axis travel speed (mm/min) between probes #define XY_PROBE_FEEDRATE (133*60) @@ -1075,7 +1077,7 @@ * A switch indicating proper deployment, or an optical * switch triggered when the carriage is near the bed. */ -//#define PROBE_ACTIVATION_SWITCH +#define PROBE_ACTIVATION_SWITCH #if ENABLED(PROBE_ACTIVATION_SWITCH) #define PROBE_ACTIVATION_SWITCH_STATE LOW // State indicating probe is active //#define PROBE_ACTIVATION_SWITCH_PIN PC6 // Override default pin @@ -1086,7 +1088,7 @@ * Useful for a strain gauge or piezo sensor that needs to factor out * elements such as cables pulling on the carriage. */ -//#define PROBE_TARE +#define PROBE_TARE #if ENABLED(PROBE_TARE) #define PROBE_TARE_TIME 200 // (ms) Time to hold tare pin #define PROBE_TARE_DELAY 200 // (ms) Delay after tare before @@ -1106,7 +1108,7 @@ * A total of 2 does fast/slow probes with a weighted average. * A total of 3 or more adds more slow probes, taking the average. */ -//#define MULTIPLE_PROBING 2 +#define MULTIPLE_PROBING 2 //#define EXTRA_PROBING 1 /** @@ -1124,15 +1126,15 @@ * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. */ #define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow -#define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points -#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes +#define Z_CLEARANCE_BETWEEN_PROBES 3 // Z Clearance between probe points +#define Z_CLEARANCE_MULTI_PROBE 2 // Z Clearance between multiple probes //#define Z_AFTER_PROBING 5 // Z position after probing is done #define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping // For M851 give a range for adjusting the Z probe offset -#define Z_PROBE_OFFSET_RANGE_MIN -20 -#define Z_PROBE_OFFSET_RANGE_MAX 20 +#define Z_PROBE_OFFSET_RANGE_MIN -10 +#define Z_PROBE_OFFSET_RANGE_MAX 10 // Enable the M48 repeatability test to test probe accuracy //#define Z_MIN_PROBE_REPEATABILITY_TEST @@ -1190,14 +1192,14 @@ // @section machine // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR false -#define INVERT_Y_DIR true -#define INVERT_Z_DIR false +#define INVERT_X_DIR true +#define INVERT_Y_DIR false +#define INVERT_Z_DIR true // @section extruder // For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR false +#define INVERT_E0_DIR true #define INVERT_E1_DIR false #define INVERT_E2_DIR false #define INVERT_E3_DIR false @@ -1218,10 +1220,10 @@ */ //#define Z_IDLE_HEIGHT Z_HOME_POS -//#define Z_HOMING_HEIGHT 4 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ... +#define Z_HOMING_HEIGHT 15 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ... // Be sure to have this much clearance over your Z_MAX_POS to prevent grinding. -//#define Z_AFTER_HOMING 10 // (mm) Height to move to after homing Z +#define Z_AFTER_HOMING 5 // (mm) Height to move to after homing Z // Direction of endstops when homing; 1=MAX, -1=MIN // :[-1,1] @@ -1232,16 +1234,16 @@ // @section machine // The size of the printable area -#define X_BED_SIZE 200 -#define Y_BED_SIZE 200 +#define X_BED_SIZE 235 +#define Y_BED_SIZE 235 // Travel limits (mm) after homing, corresponding to endstop positions. -#define X_MIN_POS 0 -#define Y_MIN_POS 0 +#define X_MIN_POS -5 +#define Y_MIN_POS -2 #define Z_MIN_POS 0 #define X_MAX_POS X_BED_SIZE #define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 200 +#define Z_MAX_POS 250 /** * Software Endstops @@ -1253,7 +1255,7 @@ */ // Min software endstops constrain movement within minimum coordinate bounds -#define MIN_SOFTWARE_ENDSTOPS +//#define MIN_SOFTWARE_ENDSTOPS #if ENABLED(MIN_SOFTWARE_ENDSTOPS) #define MIN_SOFTWARE_ENDSTOP_X #define MIN_SOFTWARE_ENDSTOP_Y @@ -1285,12 +1287,12 @@ * RAMPS-based boards use SERVO3_PIN for the first runout sensor. * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. */ -//#define FILAMENT_RUNOUT_SENSOR +#define FILAMENT_RUNOUT_SENSOR #if ENABLED(FILAMENT_RUNOUT_SENSOR) #define FIL_RUNOUT_ENABLED_DEFAULT true // Enable the sensor on startup. Override with M412 followed by M500. #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. - #define FIL_RUNOUT_STATE LOW // Pin state indicating that filament is NOT present. + #define FIL_RUNOUT_STATE HIGH // Pin state indicating that filament is NOT present. #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. //#define WATCH_ALL_RUNOUT_SENSORS // Execute runout script on any triggering sensor, not only for the active extruder. @@ -1332,7 +1334,7 @@ // Commands to execute on filament runout. // With multiple runout sensors use the %c placeholder for the current tool in commands (e.g., "M600 T%c") // NOTE: After 'M412 H1' the host handles filament runout and this script does not apply. - #define FILAMENT_RUNOUT_SCRIPT "M600" + #define FILAMENT_RUNOUT_SCRIPT "M25" // After a runout is detected, continue printing this length of filament // before executing the runout script. Useful for a sensor at the end of @@ -1387,7 +1389,7 @@ */ //#define AUTO_BED_LEVELING_3POINT //#define AUTO_BED_LEVELING_LINEAR -//#define AUTO_BED_LEVELING_BILINEAR +#define AUTO_BED_LEVELING_BILINEAR //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING @@ -1397,12 +1399,12 @@ * leveling immediately after G28. */ //#define RESTORE_LEVELING_AFTER_G28 -//#define ENABLE_LEVELING_AFTER_G28 +#define ENABLE_LEVELING_AFTER_G28 /** * Auto-leveling needs preheating */ -//#define PREHEAT_BEFORE_LEVELING +#define PREHEAT_BEFORE_LEVELING #if ENABLED(PREHEAT_BEFORE_LEVELING) #define LEVELING_NOZZLE_TEMP 120 // (°C) Only applies to E0 at this time #define LEVELING_BED_TEMP 50 @@ -1413,7 +1415,7 @@ * Turn on with the command 'M111 S32'. * NOTE: Requires a lot of PROGMEM! */ -//#define DEBUG_LEVELING_FEATURE +#define DEBUG_LEVELING_FEATURE #if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL, PROBE_MANUALLY) // Set a height for the start of manual adjustment @@ -1438,7 +1440,7 @@ /** * Enable the G26 Mesh Validation Pattern tool. */ - //#define G26_MESH_VALIDATION + #define G26_MESH_VALIDATION #if ENABLED(G26_MESH_VALIDATION) #define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle. #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for G26. @@ -1454,17 +1456,17 @@ #if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR) // Set the number of grid points per dimension. - #define GRID_MAX_POINTS_X 3 + #define GRID_MAX_POINTS_X 4 #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X // Probe along the Y axis, advancing X after each column - //#define PROBE_Y_FIRST + #define PROBE_Y_FIRST #if ENABLED(AUTO_BED_LEVELING_BILINEAR) // Beyond the probed grid, continue the implied tilt? // Default is to maintain the height of the nearest edge. - //#define EXTRAPOLATE_BEYOND_GRID + #define EXTRAPOLATE_BEYOND_GRID // // Experimental Subdivision of the grid by Catmull-Rom method. @@ -1565,7 +1567,7 @@ * Commands to execute at the end of G29 probing. * Useful to retract or move the Z probe out of the way. */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" +#define Z_PROBE_END_SCRIPT "G1 X116 Y116 F6000" // @section homing @@ -1587,7 +1589,7 @@ // - Move the Z probe (or nozzle) to a defined XY point before Z Homing. // - Prevent Z homing when the Z probe is outside bed area. // -//#define Z_SAFE_HOMING +#define Z_SAFE_HOMING #if ENABLED(Z_SAFE_HOMING) #define Z_SAFE_HOMING_X_POINT X_CENTER // X point for Z homing @@ -1672,12 +1674,12 @@ * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) */ -//#define EEPROM_SETTINGS // Persistent storage with M500 and M501 +#define EEPROM_SETTINGS // Persistent storage with M500 and M501 //#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! -#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. +//#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. #define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load #if ENABLED(EEPROM_SETTINGS) - //#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. + #define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. #endif // @@ -1706,16 +1708,16 @@ // Preheat Constants - Up to 5 are supported without changes // #define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 180 -#define PREHEAT_1_TEMP_BED 70 +#define PREHEAT_1_TEMP_HOTEND 200 +#define PREHEAT_1_TEMP_BED 60 #define PREHEAT_1_TEMP_CHAMBER 35 -#define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 +#define PREHEAT_1_FAN_SPEED 255 // Value from 0 to 255 #define PREHEAT_2_LABEL "ABS" #define PREHEAT_2_TEMP_HOTEND 240 -#define PREHEAT_2_TEMP_BED 110 +#define PREHEAT_2_TEMP_BED 70 #define PREHEAT_2_TEMP_CHAMBER 35 -#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 +#define PREHEAT_2_FAN_SPEED 255 // Value from 0 to 255 /** * Nozzle Park @@ -1728,7 +1730,7 @@ * P1 Raise the nozzle always to Z-park height. * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. */ -//#define NOZZLE_PARK_FEATURE +#define NOZZLE_PARK_FEATURE #if ENABLED(NOZZLE_PARK_FEATURE) // Specify a park position as { X, Y, Z_raise } @@ -1936,7 +1938,7 @@ * SD Card support is disabled by default. If your controller has an SD slot, * you must uncomment the following option or it won't work. */ -//#define SDSUPPORT +#define SDSUPPORT /** * SD CARD: ENABLE CRC @@ -2014,7 +2016,7 @@ // If you have a speaker that can produce tones, enable it here. // By default Marlin assumes you have a buzzer with a fixed frequency. // -//#define SPEAKER +#define SPEAKER // // The duration and frequency for the UI feedback sound. @@ -2023,8 +2025,8 @@ // Note: Test audio output with the G-Code: // M300 S P // -//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 -//#define LCD_FEEDBACK_FREQUENCY_HZ 5000 +#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 +#define LCD_FEEDBACK_FREQUENCY_HZ 5000 //============================================================================= //======================== LCD / Controller Selection ========================= @@ -2393,6 +2395,11 @@ #define USE_MKS_GREEN_UI #endif +// +// CR-6 OEM touch screen. A DWIN display with touch. +// +#define DWIN_CREALITY_TOUCHLCD + // // Touch-screen LCD for Malyan M200/M300 printers // diff --git a/config/examples/Creality/CR-6 SE/Configuration_adv.h b/config/examples/Creality/CR-6 SE/Configuration_adv.h index 5335fa012a..2f24ba04d3 100644 --- a/config/examples/Creality/CR-6 SE/Configuration_adv.h +++ b/config/examples/Creality/CR-6 SE/Configuration_adv.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Creality/CR-6 SE" + /** * Configuration_adv.h * @@ -238,7 +240,7 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds + #define THERMAL_PROTECTION_PERIOD 60 // Seconds #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius //#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops @@ -258,7 +260,7 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 20 // Seconds + #define WATCH_TEMP_PERIOD 60 // Seconds #define WATCH_TEMP_INCREASE 2 // Degrees Celsius #endif @@ -266,13 +268,13 @@ * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_BED_PERIOD 180 // Seconds #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds + #define WATCH_BED_TEMP_PERIOD 180 // Seconds #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius #endif @@ -496,7 +498,7 @@ * * Define one or both of these to override the default 0-255 range. */ -//#define FAN_MIN_PWM 50 +#define FAN_MIN_PWM 50 //#define FAN_MAX_PWM 128 /** @@ -573,7 +575,7 @@ /** * M355 Case Light on-off / brightness */ -//#define CASE_LIGHT_ENABLE +#define CASE_LIGHT_ENABLE #if ENABLED(CASE_LIGHT_ENABLE) //#define CASE_LIGHT_PIN 4 // Override the default pin if needed #define INVERT_CASE_LIGHT false // Set true if Case Light is ON when pin is LOW @@ -741,7 +743,7 @@ //#define HOMING_BACKOFF_POST_MM { 2, 2, 2 } // (mm) Backoff from endstops after homing -//#define QUICK_HOME // If G28 contains XY do a diagonal move first +#define QUICK_HOME // If G28 contains XY do a diagonal move first //#define HOME_Y_BEFORE_X // If G28 contains XY home Y before X //#define HOME_Z_FIRST // Home Z first. Requires a Z-MIN endstop (not a probe). //#define CODEPENDENT_XY_HOMING // If X/Y can't home without homing Y/X first @@ -1145,8 +1147,9 @@ // Change values more rapidly when the encoder is rotated faster #define ENCODER_RATE_MULTIPLIER #if ENABLED(ENCODER_RATE_MULTIPLIER) - #define ENCODER_10X_STEPS_PER_SEC 30 // (steps/s) Encoder rate for 10x speed - #define ENCODER_100X_STEPS_PER_SEC 80 // (steps/s) Encoder rate for 100x speed + #define ENCODER_5X_STEPS_PER_SEC 30 + #define ENCODER_10X_STEPS_PER_SEC 80 // (steps/s) Encoder rate for 10x speed + #define ENCODER_100X_STEPS_PER_SEC 130 // (steps/s) Encoder rate for 100x speed #endif // Play a beep when the feedrate is changed from the Status Screen @@ -1301,7 +1304,7 @@ //#define BROWSE_MEDIA_ON_INSERT // Open the file browser when media is inserted - #define EVENT_GCODE_SD_ABORT "G28XY" // G-code to run on SD Abort Print (e.g., "G28XY" or "G27") + #define EVENT_GCODE_SD_ABORT "G27\nM84" // G-code to run on SD Abort Print (e.g., "G28XY" or "G27") #if ENABLED(PRINTER_EVENT_LEDS) #define PE_LEDS_COMPLETED_TIME (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination @@ -1315,9 +1318,9 @@ * an option on the LCD screen to continue the print from the last-known * point in the file. */ - //#define POWER_LOSS_RECOVERY + #define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) - #define PLR_ENABLED_DEFAULT false // Power Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + #define PLR_ENABLED_DEFAULT true // Power Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) //#define BACKUP_POWER_SUPPLY // Backup power / UPS to move the steppers on power loss //#define POWER_LOSS_ZRAISE 2 // (mm) Z axis raise on resume (on power loss with UPS) //#define POWER_LOSS_PIN 44 // Pin to detect power loss. Set to -1 to disable default pin on boards without module. @@ -1361,7 +1364,7 @@ * - SDSORT_CACHE_NAMES will retain the sorted file listing in RAM. (Expensive!) * - SDSORT_DYNAMIC_RAM only uses RAM when the SD menu is visible. (Use with caution!) */ - //#define SDCARD_SORT_ALPHA + #define SDCARD_SORT_ALPHA // SD Card Sorting options #if ENABLED(SDCARD_SORT_ALPHA) @@ -1790,7 +1793,7 @@ * * Warning: Does not respect endstops! */ -//#define BABYSTEPPING +#define BABYSTEPPING #if ENABLED(BABYSTEPPING) //#define INTEGRATED_BABYSTEPPING // EXPERIMENTAL integration of babystepping into the Stepper ISR //#define BABYSTEP_WITHOUT_HOMING @@ -1798,7 +1801,7 @@ //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way //#define BABYSTEP_MILLIMETER_UNITS // Specify BABYSTEP_MULTIPLICATOR_(XY|Z) in mm instead of micro-steps - #define BABYSTEP_MULTIPLICATOR_Z 1 // (steps or mm) Steps or millimeter distance for each Z babystep + #define BABYSTEP_MULTIPLICATOR_Z 40 // (steps or mm) Steps or millimeter distance for each Z babystep #define BABYSTEP_MULTIPLICATOR_XY 1 // (steps or mm) Steps or millimeter distance for each XY babystep //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. @@ -1813,7 +1816,7 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 - //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping + #define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping #if ENABLED(BABYSTEP_ZPROBE_OFFSET) //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor @@ -1837,12 +1840,12 @@ * * See https://marlinfw.org/docs/features/lin_advance.html for full instructions. */ -//#define LIN_ADVANCE +#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) //#define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants - #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed + #define LIN_ADVANCE_K 0 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // If enabled, this will generate debug information output over USB. - //#define EXPERIMENTAL_SCURVE // Enable this option to permit S-Curve Acceleration + #define EXPERIMENTAL_SCURVE // Enable this option to permit S-Curve Acceleration #endif // @section leveling @@ -2141,7 +2144,7 @@ * Currently handles M108, M112, M410, M876 * NOTE: Not yet implemented for all platforms. */ -//#define EMERGENCY_PARSER +#define EMERGENCY_PARSER /** * Realtime Reporting (requires EMERGENCY_PARSER) @@ -2311,7 +2314,7 @@ * * Enable PARK_HEAD_ON_PAUSE to add the G-code M125 Pause and Park. */ -//#define ADVANCED_PAUSE_FEATURE +#define ADVANCED_PAUSE_FEATURE #if ENABLED(ADVANCED_PAUSE_FEATURE) #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. @@ -2345,7 +2348,7 @@ #define FILAMENT_UNLOAD_PURGE_LENGTH 8 // (mm) An unretract is done, then this length is purged. #define FILAMENT_UNLOAD_PURGE_FEEDRATE 25 // (mm/s) feedrate to purge before unload - #define PAUSE_PARK_NOZZLE_TIMEOUT 45 // (seconds) Time limit before the nozzle is turned off for safety. + #define PAUSE_PARK_NOZZLE_TIMEOUT 90 // (seconds) Time limit before the nozzle is turned off for safety. #define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed. #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change. @@ -3394,15 +3397,6 @@ #define POWER_MONITOR_VOLTAGE_OFFSET 0 // Offset (in volts) applied to the calculated voltage #endif -/** - * Stepper Driver Anti-SNAFU Protection - * - * If the SAFE_POWER_PIN is defined for your board, Marlin will check - * that stepper drivers are properly plugged in before applying power. - * Disable protection if your stepper drivers don't support the feature. - */ -//#define DISABLE_DRIVER_SAFE_POWER_PROTECT - /** * CNC Coordinate Systems * @@ -3662,9 +3656,6 @@ * Implement M486 to allow Marlin to skip objects */ //#define CANCEL_OBJECTS -#if ENABLED(CANCEL_OBJECTS) - #define CANCEL_OBJECTS_REPORTING // Emit the current object as a status message -#endif /** * I2C position encoders for closed loop control. diff --git a/config/examples/Creality/CR-8/Configuration.h b/config/examples/Creality/CR-8/Configuration.h index 78c2dc9160..8524049a34 100644 --- a/config/examples/Creality/CR-8/Configuration.h +++ b/config/examples/Creality/CR-8/Configuration.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Creality/CR-8" + /** * Configuration.h * @@ -69,7 +71,7 @@ // @section info // Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes. +#define STRING_CONFIG_H_AUTHOR "(D-side, CR-8)" // Who made the changes. //#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) /** @@ -127,18 +129,18 @@ * * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ -#define BAUDRATE 250000 +#define BAUDRATE 115200 // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH // Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_RAMPS_14_EFB + #define MOTHERBOARD BOARD_RAMPS_ENDER_4 #endif // Name displayed in the LCD "Ready" message and Info menu -//#define CUSTOM_MACHINE_NAME "3D Printer" +#define CUSTOM_MACHINE_NAME "CR-8" // Printer's unique ID, used by some programs to differentiate between machines. // Choose your own or use a service like https://www.uuidgenerator.net/version4 @@ -424,7 +426,7 @@ #define TEMP_SENSOR_5 0 #define TEMP_SENSOR_6 0 #define TEMP_SENSOR_7 0 -#define TEMP_SENSOR_BED 0 +#define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 #define TEMP_SENSOR_COOLER 0 @@ -510,16 +512,17 @@ //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) // Set/get with gcode: M301 E[extruder number, 0-2] + // Ender-4 #if ENABLED(PID_PARAMS_PER_HOTEND) // Specify between 1 and HOTENDS values per array. // If fewer than EXTRUDER values are provided, the last element will be repeated. - #define DEFAULT_Kp_LIST { 22.20, 22.20 } - #define DEFAULT_Ki_LIST { 1.08, 1.08 } - #define DEFAULT_Kd_LIST { 114.00, 114.00 } + #define DEFAULT_Kp_LIST { 21.73, 21.73 } + #define DEFAULT_Ki_LIST { 1.54, 1.54 } + #define DEFAULT_Kd_LIST { 76.55, 76.55 } #else - #define DEFAULT_Kp 22.20 - #define DEFAULT_Ki 1.08 - #define DEFAULT_Kd 114.00 + #define DEFAULT_Kp 21.73 + #define DEFAULT_Ki 1.54 + #define DEFAULT_Kd 76.55 #endif #endif // PIDTEMP @@ -556,11 +559,10 @@ //#define MIN_BED_POWER 0 //#define PID_BED_DEBUG // Sends debug data to the serial port. - // 120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - // from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) - #define DEFAULT_bedKp 10.00 - #define DEFAULT_bedKi .023 - #define DEFAULT_bedKd 305.4 + // Ender-4 + #define DEFAULT_bedKp 426.68 + #define DEFAULT_bedKi 78.92 + #define DEFAULT_bedKd 576.71 // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. #endif // PIDTEMPBED @@ -627,14 +629,14 @@ * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** */ #define PREVENT_COLD_EXTRUSION -#define EXTRUDE_MINTEMP 170 +#define EXTRUDE_MINTEMP 190 /** * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. * Note: For Bowden Extruders make this large enough to allow load/unload. */ #define PREVENT_LENGTHY_EXTRUDE -#define EXTRUDE_MAXLENGTH 200 +#define EXTRUDE_MAXLENGTH 500 //=========================================================================== //======================== Thermal Runaway Protection ======================= @@ -806,14 +808,14 @@ * Override with M92 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 500 } +#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 92.60 } /** * Default Max Feed Rate (mm/s) * Override with M203 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 } +#define DEFAULT_MAX_FEEDRATE { 500, 500, 5, 25 } //#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 #if ENABLED(LIMITED_MAX_FR_EDITING) @@ -826,7 +828,7 @@ * Override with M201 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 } +#define DEFAULT_MAX_ACCELERATION { 500, 500, 100, 5000 } //#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 #if ENABLED(LIMITED_MAX_ACCEL_EDITING) @@ -841,9 +843,9 @@ * M204 R Retract Acceleration * M204 T Travel Acceleration */ -#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves +#define DEFAULT_ACCELERATION 500 // X, Y, Z and E acceleration for printing moves +#define DEFAULT_RETRACT_ACCELERATION 500 // E acceleration for retracts +#define DEFAULT_TRAVEL_ACCELERATION 500 // X, Y, Z acceleration for travel (non printing) moves /** * Default Jerk limits (mm/s) @@ -857,7 +859,7 @@ #if ENABLED(CLASSIC_JERK) #define DEFAULT_XJERK 10.0 #define DEFAULT_YJERK 10.0 - #define DEFAULT_ZJERK 0.3 + #define DEFAULT_ZJERK 0.4 //#define TRAVEL_EXTRA_XYJERK 0.0 // Additional jerk allowance for all travel moves @@ -877,7 +879,7 @@ * https://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html */ #if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.013 // (mm) Distance from real junction edge + #define JUNCTION_DEVIATION_MM 0.08 // (mm) Distance from real junction edge #define JD_HANDLE_SMALL_SEGMENTS // Use curvature estimation instead of just the junction angle // for small segments (< 1mm) with large junction angles (> 135°). #endif @@ -940,7 +942,7 @@ * Use G29 repeatedly, adjusting the Z height at each point with movement commands * or (with LCD_BED_LEVELING) the LCD controller. */ -//#define PROBE_MANUALLY +#define PROBE_MANUALLY /** * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. @@ -957,7 +959,7 @@ /** * Z Servo Probe, such as an endstop switch on a rotating arm. */ -//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector. +//#define Z_ENDSTOP_SERVO_NR 0 // Defaults to SERVO 0 connector. //#define Z_SERVO_ANGLES { 70, 0 } // Z Servo Deploy and Stow angles /** @@ -1190,14 +1192,14 @@ // @section machine // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR false +#define INVERT_X_DIR true #define INVERT_Y_DIR true #define INVERT_Z_DIR false // @section extruder // For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR false +#define INVERT_E0_DIR true #define INVERT_E1_DIR false #define INVERT_E2_DIR false #define INVERT_E3_DIR false @@ -1232,8 +1234,8 @@ // @section machine // The size of the printable area -#define X_BED_SIZE 200 -#define Y_BED_SIZE 200 +#define X_BED_SIZE 220 +#define Y_BED_SIZE 220 // Travel limits (mm) after homing, corresponding to endstop positions. #define X_MIN_POS 0 @@ -1241,7 +1243,7 @@ #define Z_MIN_POS 0 #define X_MAX_POS X_BED_SIZE #define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 200 +#define Z_MAX_POS 310 /** * Software Endstops @@ -1387,7 +1389,7 @@ */ //#define AUTO_BED_LEVELING_3POINT //#define AUTO_BED_LEVELING_LINEAR -//#define AUTO_BED_LEVELING_BILINEAR +#define AUTO_BED_LEVELING_BILINEAR //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING @@ -1438,7 +1440,7 @@ /** * Enable the G26 Mesh Validation Pattern tool. */ - //#define G26_MESH_VALIDATION + #define G26_MESH_VALIDATION #if ENABLED(G26_MESH_VALIDATION) #define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle. #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for G26. @@ -1518,7 +1520,7 @@ * Add a bed leveling sub-menu for ABL or MBL. * Include a guided procedure if manual probing is enabled. */ -//#define LCD_BED_LEVELING +#define LCD_BED_LEVELING #if ENABLED(LCD_BED_LEVELING) #define MESH_EDIT_Z_STEP 0.025 // (mm) Step size while manually probing Z axis. @@ -1595,7 +1597,7 @@ #endif // Homing speeds (mm/min) -#define HOMING_FEEDRATE_MM_M { (50*60), (50*60), (4*60) } +#define HOMING_FEEDRATE_MM_M { (20*60), (20*60), (4*60) } // Validate that endstops are triggered on homing moves #define VALIDATE_HOMING_ENDSTOPS @@ -1672,7 +1674,7 @@ * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) */ -//#define EEPROM_SETTINGS // Persistent storage with M500 and M501 +#define EEPROM_SETTINGS // Persistent storage with M500 and M501 //#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. #define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load @@ -1706,8 +1708,8 @@ // Preheat Constants - Up to 5 are supported without changes // #define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 180 -#define PREHEAT_1_TEMP_BED 70 +#define PREHEAT_1_TEMP_HOTEND 200 +#define PREHEAT_1_TEMP_BED 60 #define PREHEAT_1_TEMP_CHAMBER 35 #define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 @@ -1777,7 +1779,7 @@ * Caveats: The ending Z should be the same as starting Z. * Attention: EXPERIMENTAL. G-code arguments may change. */ -//#define NOZZLE_CLEAN_FEATURE +#define NOZZLE_CLEAN_FEATURE #if ENABLED(NOZZLE_CLEAN_FEATURE) // Default number of pattern repetitions @@ -1845,7 +1847,7 @@ * * View the current statistics with M78. */ -//#define PRINTCOUNTER +#define PRINTCOUNTER #if ENABLED(PRINTCOUNTER) #define PRINTCOUNTER_SAVE_INTERVAL 60 // (minutes) EEPROM save interval during print #endif @@ -1936,7 +1938,7 @@ * SD Card support is disabled by default. If your controller has an SD slot, * you must uncomment the following option or it won't work. */ -//#define SDSUPPORT +#define SDSUPPORT /** * SD CARD: ENABLE CRC @@ -2006,7 +2008,7 @@ // // Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. // -//#define INDIVIDUAL_AXIS_HOMING_MENU +#define INDIVIDUAL_AXIS_HOMING_MENU // // SPEAKER/BUZZER @@ -2037,7 +2039,7 @@ // // Note: Usually sold with a white PCB. // -//#define REPRAP_DISCOUNT_SMART_CONTROLLER +#define REPRAP_DISCOUNT_SMART_CONTROLLER // // GT2560 (YHCB2004) LCD Display diff --git a/config/examples/Creality/CR-8/Configuration_adv.h b/config/examples/Creality/CR-8/Configuration_adv.h index 5335fa012a..af22fdc5cc 100644 --- a/config/examples/Creality/CR-8/Configuration_adv.h +++ b/config/examples/Creality/CR-8/Configuration_adv.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Creality/CR-8" + /** * Configuration_adv.h * @@ -741,7 +743,7 @@ //#define HOMING_BACKOFF_POST_MM { 2, 2, 2 } // (mm) Backoff from endstops after homing -//#define QUICK_HOME // If G28 contains XY do a diagonal move first +#define QUICK_HOME // If G28 contains XY do a diagonal move first //#define HOME_Y_BEFORE_X // If G28 contains XY home Y before X //#define HOME_Z_FIRST // Home Z first. Requires a Z-MIN endstop (not a probe). //#define CODEPENDENT_XY_HOMING // If X/Y can't home without homing Y/X first @@ -792,7 +794,7 @@ * differs, a mode set eeprom write will be completed at initialization. * Use the option below to force an eeprom write to a V3.1 probe regardless. */ - //#define BLTOUCH_SET_5V_MODE + #define BLTOUCH_SET_5V_MODE /** * Safety: Activate if connecting a probe with an unknown voltage mode. @@ -867,7 +869,7 @@ // On a 300mm bed a 5% grade would give a misalignment of ~1.5cm #define G34_MAX_GRADE 5 // (%) Maximum incline that G34 will handle - #define Z_STEPPER_ALIGN_ITERATIONS 5 // Number of iterations to apply during alignment + #define Z_STEPPER_ALIGN_ITERATIONS 3 // Number of iterations to apply during alignment #define Z_STEPPER_ALIGN_ACC 0.02 // Stop iterating early if the accuracy is better than this #define RESTORE_LEVELING_AFTER_G34 // Restore leveling after G34 is done? // After G34, re-home Z (G28 Z) or just calculate it from the last probe heights? @@ -928,7 +930,7 @@ #define DEFAULT_STEPPER_DEACTIVE_TIME 120 #define DISABLE_INACTIVE_X true #define DISABLE_INACTIVE_Y true -#define DISABLE_INACTIVE_Z true // Set 'false' if the nozzle could fall onto your printed part! +#define DISABLE_INACTIVE_Z false // Set 'false' if the nozzle could fall onto your printed part! #define DISABLE_INACTIVE_E true // Default Minimum Feedrates for printing and travel moves @@ -1229,7 +1231,7 @@ #endif // Scroll a longer status message into view - //#define STATUS_MESSAGE_SCROLLING + #define STATUS_MESSAGE_SCROLLING // On the Info Screen, display XY with one decimal place when possible //#define LCD_DECIMAL_SMALL_XY @@ -1384,7 +1386,7 @@ //#define LONG_FILENAME_HOST_SUPPORT // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES + #define SCROLL_LONG_FILENAMES // Leave the heaters on after Stop Print (not recommended!) //#define SD_ABORT_NO_COOLDOWN @@ -1790,7 +1792,7 @@ * * Warning: Does not respect endstops! */ -//#define BABYSTEPPING +#define BABYSTEPPING #if ENABLED(BABYSTEPPING) //#define INTEGRATED_BABYSTEPPING // EXPERIMENTAL integration of babystepping into the Stepper ISR //#define BABYSTEP_WITHOUT_HOMING @@ -1798,10 +1800,10 @@ //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way //#define BABYSTEP_MILLIMETER_UNITS // Specify BABYSTEP_MULTIPLICATOR_(XY|Z) in mm instead of micro-steps - #define BABYSTEP_MULTIPLICATOR_Z 1 // (steps or mm) Steps or millimeter distance for each Z babystep - #define BABYSTEP_MULTIPLICATOR_XY 1 // (steps or mm) Steps or millimeter distance for each XY babystep + #define BABYSTEP_MULTIPLICATOR_Z 5 // (steps or mm) Steps or millimeter distance for each Z babystep + #define BABYSTEP_MULTIPLICATOR_XY 5 // (steps or mm) Steps or millimeter distance for each XY babystep - //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. + #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. // Note: Extra time may be added to mitigate controller latency. @@ -2141,7 +2143,7 @@ * Currently handles M108, M112, M410, M876 * NOTE: Not yet implemented for all platforms. */ -//#define EMERGENCY_PARSER +#define EMERGENCY_PARSER /** * Realtime Reporting (requires EMERGENCY_PARSER) @@ -3474,7 +3476,7 @@ //#define NO_WORKSPACE_OFFSETS // Extra options for the M114 "Current Position" report -//#define M114_DETAIL // Use 'M114` for details to check planner calculations +#define M114_DETAIL // Use 'M114` for details to check planner calculations //#define M114_REALTIME // Real current position based on forward kinematics //#define M114_LEGACY // M114 used to synchronize on every call. Enable if needed. diff --git a/config/examples/Creality/Ender-2/Configuration.h b/config/examples/Creality/Ender-2/Configuration.h index 78c2dc9160..39134aceaa 100644 --- a/config/examples/Creality/Ender-2/Configuration.h +++ b/config/examples/Creality/Ender-2/Configuration.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Creality/Ender-2" + /** * Configuration.h * @@ -69,7 +71,7 @@ // @section info // Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes. +#define STRING_CONFIG_H_AUTHOR "(tommie, Ender 2/4)" // Who made the changes. //#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) /** @@ -87,10 +89,10 @@ #define SHOW_BOOTSCREEN // Show the bitmap in Marlin/_Bootscreen.h on startup. -//#define SHOW_CUSTOM_BOOTSCREEN +#define SHOW_CUSTOM_BOOTSCREEN // Show the bitmap in Marlin/_Statusscreen.h on the status screen. -//#define CUSTOM_STATUS_SCREEN_IMAGE +#define CUSTOM_STATUS_SCREEN_IMAGE // @section machine @@ -127,18 +129,18 @@ * * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ -#define BAUDRATE 250000 +#define BAUDRATE 115200 // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH // Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_RAMPS_14_EFB + #define MOTHERBOARD BOARD_MELZI_CREALITY #endif // Name displayed in the LCD "Ready" message and Info menu -//#define CUSTOM_MACHINE_NAME "3D Printer" +#define CUSTOM_MACHINE_NAME "Ender 3D" // Printer's unique ID, used by some programs to differentiate between machines. // Choose your own or use a service like https://www.uuidgenerator.net/version4 @@ -424,7 +426,7 @@ #define TEMP_SENSOR_5 0 #define TEMP_SENSOR_6 0 #define TEMP_SENSOR_7 0 -#define TEMP_SENSOR_BED 0 +#define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 #define TEMP_SENSOR_COOLER 0 @@ -480,7 +482,7 @@ #define HEATER_5_MAXTEMP 275 #define HEATER_6_MAXTEMP 275 #define HEATER_7_MAXTEMP 275 -#define BED_MAXTEMP 150 +#define BED_MAXTEMP 75 #define CHAMBER_MAXTEMP 60 /** @@ -510,16 +512,17 @@ //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) // Set/get with gcode: M301 E[extruder number, 0-2] + // Creality Ender #if ENABLED(PID_PARAMS_PER_HOTEND) // Specify between 1 and HOTENDS values per array. // If fewer than EXTRUDER values are provided, the last element will be repeated. - #define DEFAULT_Kp_LIST { 22.20, 22.20 } - #define DEFAULT_Ki_LIST { 1.08, 1.08 } - #define DEFAULT_Kd_LIST { 114.00, 114.00 } + #define DEFAULT_Kp_LIST { 21.73, 21.73 } + #define DEFAULT_Ki_LIST { 1.54, 1.54 } + #define DEFAULT_Kd_LIST { 76.55, 76.55 } #else - #define DEFAULT_Kp 22.20 - #define DEFAULT_Ki 1.08 - #define DEFAULT_Kd 114.00 + #define DEFAULT_Kp 21.73 + #define DEFAULT_Ki 1.54 + #define DEFAULT_Kd 76.55 #endif #endif // PIDTEMP @@ -806,14 +809,14 @@ * Override with M92 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 500 } +#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 93 } /** * Default Max Feed Rate (mm/s) * Override with M203 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 } +#define DEFAULT_MAX_FEEDRATE { 500, 500, 5, 25 } //#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 #if ENABLED(LIMITED_MAX_FR_EDITING) @@ -826,7 +829,7 @@ * Override with M201 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 } +#define DEFAULT_MAX_ACCELERATION { 500, 500, 100, 5000 } //#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 #if ENABLED(LIMITED_MAX_ACCEL_EDITING) @@ -841,9 +844,9 @@ * M204 R Retract Acceleration * M204 T Travel Acceleration */ -#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves +#define DEFAULT_ACCELERATION 500 // X, Y, Z and E acceleration for printing moves +#define DEFAULT_RETRACT_ACCELERATION 500 // E acceleration for retracts +#define DEFAULT_TRAVEL_ACCELERATION 500 // X, Y, Z acceleration for travel (non printing) moves /** * Default Jerk limits (mm/s) @@ -877,7 +880,7 @@ * https://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html */ #if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.013 // (mm) Distance from real junction edge + #define JUNCTION_DEVIATION_MM 0.08 // (mm) Distance from real junction edge #define JD_HANDLE_SMALL_SEGMENTS // Use curvature estimation instead of just the junction angle // for small segments (< 1mm) with large junction angles (> 135°). #endif @@ -1185,19 +1188,19 @@ // @section extruder #define DISABLE_E false // Disable the extruder when not stepping -#define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled +//#define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled // @section machine // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR false +#define INVERT_X_DIR true #define INVERT_Y_DIR true #define INVERT_Z_DIR false // @section extruder // For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR false +#define INVERT_E0_DIR true #define INVERT_E1_DIR false #define INVERT_E2_DIR false #define INVERT_E3_DIR false @@ -1232,8 +1235,8 @@ // @section machine // The size of the printable area -#define X_BED_SIZE 200 -#define Y_BED_SIZE 200 +#define X_BED_SIZE 150 +#define Y_BED_SIZE 150 // Travel limits (mm) after homing, corresponding to endstop positions. #define X_MIN_POS 0 @@ -1595,7 +1598,7 @@ #endif // Homing speeds (mm/min) -#define HOMING_FEEDRATE_MM_M { (50*60), (50*60), (4*60) } +#define HOMING_FEEDRATE_MM_M { (20*60), (20*60), (4*60) } // Validate that endstops are triggered on homing moves #define VALIDATE_HOMING_ENDSTOPS @@ -1706,16 +1709,16 @@ // Preheat Constants - Up to 5 are supported without changes // #define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 180 -#define PREHEAT_1_TEMP_BED 70 +#define PREHEAT_1_TEMP_HOTEND 185 +#define PREHEAT_1_TEMP_BED 45 #define PREHEAT_1_TEMP_CHAMBER 35 -#define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 +#define PREHEAT_1_FAN_SPEED 255 // Value from 0 to 255 #define PREHEAT_2_LABEL "ABS" #define PREHEAT_2_TEMP_HOTEND 240 -#define PREHEAT_2_TEMP_BED 110 +#define PREHEAT_2_TEMP_BED 0 #define PREHEAT_2_TEMP_CHAMBER 35 -#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 +#define PREHEAT_2_FAN_SPEED 255 // Value from 0 to 255 /** * Nozzle Park @@ -1936,7 +1939,7 @@ * SD Card support is disabled by default. If your controller has an SD slot, * you must uncomment the following option or it won't work. */ -//#define SDSUPPORT +#define SDSUPPORT /** * SD CARD: ENABLE CRC @@ -2292,7 +2295,7 @@ // // Ender-2 OEM display, a variant of the MKS_MINI_12864 // -//#define ENDER2_STOCKDISPLAY +#define ENDER2_STOCKDISPLAY // // ANET and Tronxy Graphical Controller diff --git a/config/examples/Creality/Ender-2/Configuration_adv.h b/config/examples/Creality/Ender-2/Configuration_adv.h index 5335fa012a..4b67a30db0 100644 --- a/config/examples/Creality/Ender-2/Configuration_adv.h +++ b/config/examples/Creality/Ender-2/Configuration_adv.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Creality/Ender-2" + /** * Configuration_adv.h * @@ -736,7 +738,7 @@ //#define SENSORLESS_BACKOFF_MM { 2, 2 } // (mm) Backoff from endstops before sensorless homing -#define HOMING_BUMP_MM { 5, 5, 2 } // (mm) Backoff from endstops after first bump +#define HOMING_BUMP_MM { 5, 5, 1 } // (mm) Backoff from endstops after first bump #define HOMING_BUMP_DIVISOR { 2, 2, 4 } // Re-Bump Speed Divisor (Divides the Homing Feedrate) //#define HOMING_BACKOFF_POST_MM { 2, 2, 2 } // (mm) Backoff from endstops after homing @@ -792,7 +794,7 @@ * differs, a mode set eeprom write will be completed at initialization. * Use the option below to force an eeprom write to a V3.1 probe regardless. */ - //#define BLTOUCH_SET_5V_MODE + #define BLTOUCH_SET_5V_MODE /** * Safety: Activate if connecting a probe with an unknown voltage mode. @@ -867,7 +869,7 @@ // On a 300mm bed a 5% grade would give a misalignment of ~1.5cm #define G34_MAX_GRADE 5 // (%) Maximum incline that G34 will handle - #define Z_STEPPER_ALIGN_ITERATIONS 5 // Number of iterations to apply during alignment + #define Z_STEPPER_ALIGN_ITERATIONS 3 // Number of iterations to apply during alignment #define Z_STEPPER_ALIGN_ACC 0.02 // Stop iterating early if the accuracy is better than this #define RESTORE_LEVELING_AFTER_G34 // Restore leveling after G34 is done? // After G34, re-home Z (G28 Z) or just calculate it from the last probe heights? @@ -1134,7 +1136,7 @@ // @section lcd #if EITHER(IS_ULTIPANEL, EXTENSIBLE_UI) - #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel + #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 0 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines #if IS_ULTIPANEL #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position" diff --git a/config/examples/Creality/Ender-3 Max/Configuration.h b/config/examples/Creality/Ender-3 Max/Configuration.h index 78c2dc9160..06f9dfdabf 100644 --- a/config/examples/Creality/Ender-3 Max/Configuration.h +++ b/config/examples/Creality/Ender-3 Max/Configuration.h @@ -1,6 +1,6 @@ /** * Marlin 3D Printer Firmware - * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * Copyright (c) 2021 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * * Based on Sprinter and grbl. * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Creality/Ender-3 Max" + /** * Configuration.h * @@ -69,7 +71,7 @@ // @section info // Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes. +#define STRING_CONFIG_H_AUTHOR "(Chad, Ender-3 Max)" // Who made the changes. //#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) /** @@ -87,10 +89,10 @@ #define SHOW_BOOTSCREEN // Show the bitmap in Marlin/_Bootscreen.h on startup. -//#define SHOW_CUSTOM_BOOTSCREEN +#define SHOW_CUSTOM_BOOTSCREEN // Show the bitmap in Marlin/_Statusscreen.h on the status screen. -//#define CUSTOM_STATUS_SCREEN_IMAGE +#define CUSTOM_STATUS_SCREEN_IMAGE // @section machine @@ -102,7 +104,7 @@ * * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] */ -#define SERIAL_PORT 0 +#define SERIAL_PORT 1 /** * Select a secondary serial port on the board to use for communication with the host. @@ -134,11 +136,11 @@ // Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_RAMPS_14_EFB + #define MOTHERBOARD BOARD_CREALITY_V4 #endif // Name displayed in the LCD "Ready" message and Info menu -//#define CUSTOM_MACHINE_NAME "3D Printer" +#define CUSTOM_MACHINE_NAME "Ender-3 Max 4.2.2" // Printer's unique ID, used by some programs to differentiate between machines. // Choose your own or use a service like https://www.uuidgenerator.net/version4 @@ -424,7 +426,7 @@ #define TEMP_SENSOR_5 0 #define TEMP_SENSOR_6 0 #define TEMP_SENSOR_7 0 -#define TEMP_SENSOR_BED 0 +#define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 #define TEMP_SENSOR_COOLER 0 @@ -458,7 +460,7 @@ // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. -#define HEATER_0_MINTEMP 5 +#define HEATER_0_MINTEMP 0 #define HEATER_1_MINTEMP 5 #define HEATER_2_MINTEMP 5 #define HEATER_3_MINTEMP 5 @@ -466,7 +468,7 @@ #define HEATER_5_MINTEMP 5 #define HEATER_6_MINTEMP 5 #define HEATER_7_MINTEMP 5 -#define BED_MINTEMP 5 +#define BED_MINTEMP 0 #define CHAMBER_MINTEMP 5 // Above this temperature the heater will be switched off. @@ -505,21 +507,23 @@ #define PID_K1 0.95 // Smoothing factor within any PID loop #if ENABLED(PIDTEMP) - //#define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) - //#define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) + #define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) + #define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) // Set/get with gcode: M301 E[extruder number, 0-2] + // Creality Ender-3 #if ENABLED(PID_PARAMS_PER_HOTEND) // Specify between 1 and HOTENDS values per array. // If fewer than EXTRUDER values are provided, the last element will be repeated. - #define DEFAULT_Kp_LIST { 22.20, 22.20 } - #define DEFAULT_Ki_LIST { 1.08, 1.08 } - #define DEFAULT_Kd_LIST { 114.00, 114.00 } + #define DEFAULT_Kp_LIST { 21.73, 21.73 } + #define DEFAULT_Ki_LIST { 1.54, 1.54 } + #define DEFAULT_Kd_LIST { 76.55, 76.55 } #else - #define DEFAULT_Kp 22.20 - #define DEFAULT_Ki 1.08 - #define DEFAULT_Kd 114.00 + // Creality Stock - Ender 3 Max tuned + #define DEFAULT_Kp 21.39 + #define DEFAULT_Ki 1.56 + #define DEFAULT_Kd 73.30 #endif #endif // PIDTEMP @@ -540,7 +544,7 @@ * heater. If your configuration is significantly different than this and you don't understand * the issues involved, don't use bed PID until someone else verifies that your hardware works. */ -//#define PIDTEMPBED +#define PIDTEMPBED //#define BED_LIMIT_SWITCHING @@ -556,11 +560,17 @@ //#define MIN_BED_POWER 0 //#define PID_BED_DEBUG // Sends debug data to the serial port. - // 120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - // from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) - #define DEFAULT_bedKp 10.00 - #define DEFAULT_bedKi .023 - #define DEFAULT_bedKd 305.4 + //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) + //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) + #define DEFAULT_bedKp 162.06 + #define DEFAULT_bedKi 17.89 + #define DEFAULT_bedKd 978.75 + + //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) + //from pidautotune + //#define DEFAULT_bedKp 97.1 + //#define DEFAULT_bedKi 1.41 + //#define DEFAULT_bedKd 1675.16 // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. #endif // PIDTEMPBED @@ -634,7 +644,7 @@ * Note: For Bowden Extruders make this large enough to allow load/unload. */ #define PREVENT_LENGTHY_EXTRUDE -#define EXTRUDE_MAXLENGTH 200 +#define EXTRUDE_MAXLENGTH 1000 //=========================================================================== //======================== Thermal Runaway Protection ======================= @@ -700,7 +710,7 @@ //#define ENDSTOPPULLUP_XMIN //#define ENDSTOPPULLUP_YMIN //#define ENDSTOPPULLUP_ZMIN - //#define ENDSTOPPULLUP_ZMIN_PROBE + //#define ENDSTOPPULLUP_ZMIN_PROBE // ENABLE FOR BLTOUCH #endif // Enable pulldown for all endstops to prevent a floating state @@ -743,15 +753,15 @@ * TMC5130, TMC5130_STANDALONE, TMC5160, TMC5160_STANDALONE * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'L6474', 'POWERSTEP01', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2160', 'TMC2160_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC2209', 'TMC2209_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE', 'TMC5160', 'TMC5160_STANDALONE'] */ -#define X_DRIVER_TYPE A4988 -#define Y_DRIVER_TYPE A4988 -#define Z_DRIVER_TYPE A4988 +#define X_DRIVER_TYPE TMC2208_STANDALONE +#define Y_DRIVER_TYPE TMC2208_STANDALONE +#define Z_DRIVER_TYPE TMC2208_STANDALONE //#define X2_DRIVER_TYPE A4988 //#define Y2_DRIVER_TYPE A4988 //#define Z2_DRIVER_TYPE A4988 //#define Z3_DRIVER_TYPE A4988 //#define Z4_DRIVER_TYPE A4988 -#define E0_DRIVER_TYPE A4988 +#define E0_DRIVER_TYPE TMC2208_STANDALONE //#define E1_DRIVER_TYPE A4988 //#define E2_DRIVER_TYPE A4988 //#define E3_DRIVER_TYPE A4988 @@ -762,7 +772,7 @@ // Enable this feature if all enabled endstop pins are interrupt-capable. // This will remove the need to poll the interrupt pins, saving many CPU cycles. -//#define ENDSTOP_INTERRUPTS_FEATURE +#define ENDSTOP_INTERRUPTS_FEATURE /** * Endstop Noise Threshold @@ -806,14 +816,16 @@ * Override with M92 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 500 } + +// Creality Stock Extruder +#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 93 } /** * Default Max Feed Rate (mm/s) * Override with M203 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 } +#define DEFAULT_MAX_FEEDRATE { 6000, 6000, 300, 6000 } //#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 #if ENABLED(LIMITED_MAX_FR_EDITING) @@ -826,7 +838,7 @@ * Override with M201 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 } +#define DEFAULT_MAX_ACCELERATION { 6000, 6000, 300, 20000 } //#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 #if ENABLED(LIMITED_MAX_ACCEL_EDITING) @@ -841,9 +853,9 @@ * M204 R Retract Acceleration * M204 T Travel Acceleration */ -#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves +#define DEFAULT_ACCELERATION 500 // X, Y, Z and E acceleration for printing moves +#define DEFAULT_RETRACT_ACCELERATION 500 // E acceleration for retracts +#define DEFAULT_TRAVEL_ACCELERATION 1000 // X, Y, Z acceleration for travel (non printing) moves /** * Default Jerk limits (mm/s) @@ -877,7 +889,7 @@ * https://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html */ #if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.013 // (mm) Distance from real junction edge + #define JUNCTION_DEVIATION_MM 0.1 // (mm) Distance from real junction edge // default is 0.013 #define JD_HANDLE_SMALL_SEGMENTS // Use curvature estimation instead of just the junction angle // for small segments (< 1mm) with large junction angles (> 135°). #endif @@ -890,7 +902,7 @@ * * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained */ -//#define S_CURVE_ACCELERATION +#define S_CURVE_ACCELERATION //=========================================================================== //============================= Z Probe Options ============================= @@ -906,10 +918,10 @@ * The probe replaces the Z-MIN endstop and is used for Z homing. * (Automatically enables USE_PROBE_FOR_Z_HOMING.) */ -#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN +//#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN // Force the use of the probe for Z-axis homing -//#define USE_PROBE_FOR_Z_HOMING +//#define USE_PROBE_FOR_Z_HOMING // ENABLE FOR BLTOUCH /** * Z_MIN_PROBE_PIN @@ -926,7 +938,8 @@ * - normally-closed switches to GND and D32. * - normally-open switches to 5V and D32. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default + +//#define Z_MIN_PROBE_PIN Z_PROBE_PIN // Pin 32 is the RAMPS default /** * Probe Type @@ -963,7 +976,7 @@ /** * The BLTouch probe uses a Hall effect sensor and emulates a servo. */ -//#define BLTOUCH +//#define BLTOUCH // ENABLE FOR BLTOUCH /** * Touch-MI Probe by hotends.fr @@ -1055,17 +1068,28 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +// Default stock +#define NOZZLE_TO_PROBE_OFFSET { 50, -6, 0 } // Most probes should stay away from the edges of the bed, but // with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 +#define PROBING_MARGIN_LEFT PROBING_MARGIN +#define PROBING_MARGIN_RIGHT 3 +#define PROBING_MARGIN_FRONT PROBING_MARGIN +#define PROBING_MARGIN_BACK PROBING_MARGIN -// X and Y axis travel speed (mm/min) between probes -#define XY_PROBE_FEEDRATE (133*60) +// X and Y axis travel speed (mm/m) between probes +#define XY_PROBE_FEEDRATE 12000 // Feedrate (mm/min) for the first approach when double-probing (MULTIPLE_PROBING == 2) -#define Z_PROBE_FEEDRATE_FAST (4*60) +#define Z_PROBE_FEEDRATE_FAST (10*60) + +// Feedrate (mm/min) for the "accurate" probe of each point +#define Z_PROBE_FEEDRATE_SLOW (Z_PROBE_FEEDRATE_FAST / 2) + +// Feedrate (mm/min) for the first approach when double-probing (MULTIPLE_PROBING == 2) +#define Z_PROBE_FEEDRATE_FAST (10*60) // Feedrate (mm/min) for the "accurate" probe of each point #define Z_PROBE_FEEDRATE_SLOW (Z_PROBE_FEEDRATE_FAST / 2) @@ -1106,7 +1130,7 @@ * A total of 2 does fast/slow probes with a weighted average. * A total of 3 or more adds more slow probes, taking the average. */ -//#define MULTIPLE_PROBING 2 +//#define MULTIPLE_PROBING 1 //#define EXTRA_PROBING 1 /** @@ -1131,11 +1155,11 @@ #define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping // For M851 give a range for adjusting the Z probe offset -#define Z_PROBE_OFFSET_RANGE_MIN -20 -#define Z_PROBE_OFFSET_RANGE_MAX 20 +#define Z_PROBE_OFFSET_RANGE_MIN -10 +#define Z_PROBE_OFFSET_RANGE_MAX 10 // Enable the M48 repeatability test to test probe accuracy -//#define Z_MIN_PROBE_REPEATABILITY_TEST +//#define Z_MIN_PROBE_REPEATABILITY_TEST // ENABLE FOR BLTOUCH // Before deploy/stow pause for user confirmation //#define PAUSE_BEFORE_DEPLOY_STOW @@ -1157,13 +1181,13 @@ #endif //#define PROBING_FANS_OFF // Turn fans off when probing //#define PROBING_STEPPERS_OFF // Turn steppers off (unless needed to hold position) when probing -//#define DELAY_BEFORE_PROBING 200 // (ms) To prevent vibrations from triggering piezo sensors +#define DELAY_BEFORE_PROBING 100 // (ms) To prevent vibrations from triggering piezo sensors // Require minimum nozzle and/or bed temperature for probing //#define PREHEAT_BEFORE_PROBING #if ENABLED(PREHEAT_BEFORE_PROBING) #define PROBING_NOZZLE_TEMP 120 // (°C) Only applies to E0 at this time - #define PROBING_BED_TEMP 50 + #define PROBING_BED_TEMP 65 #endif // For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1 @@ -1191,8 +1215,8 @@ // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR false -#define INVERT_Y_DIR true -#define INVERT_Z_DIR false +#define INVERT_Y_DIR false +#define INVERT_Z_DIR true // @section extruder @@ -1232,8 +1256,8 @@ // @section machine // The size of the printable area -#define X_BED_SIZE 200 -#define Y_BED_SIZE 200 +#define X_BED_SIZE 300 +#define Y_BED_SIZE 300 // Travel limits (mm) after homing, corresponding to endstop positions. #define X_MIN_POS 0 @@ -1241,7 +1265,7 @@ #define Z_MIN_POS 0 #define X_MAX_POS X_BED_SIZE #define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 200 +#define Z_MAX_POS 340 /** * Software Endstops @@ -1257,7 +1281,7 @@ #if ENABLED(MIN_SOFTWARE_ENDSTOPS) #define MIN_SOFTWARE_ENDSTOP_X #define MIN_SOFTWARE_ENDSTOP_Y - #define MIN_SOFTWARE_ENDSTOP_Z + #define MIN_SOFTWARE_ENDSTOP_Z // DISABLE FOR BLTOUCH #endif // Max software endstops constrain movement within maximum coordinate bounds @@ -1285,8 +1309,9 @@ * RAMPS-based boards use SERVO3_PIN for the first runout sensor. * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. */ -//#define FILAMENT_RUNOUT_SENSOR +#define FILAMENT_RUNOUT_SENSOR #if ENABLED(FILAMENT_RUNOUT_SENSOR) + #define FIL_RUNOUT_PIN PA4 #define FIL_RUNOUT_ENABLED_DEFAULT true // Enable the sensor on startup. Override with M412 followed by M500. #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. @@ -1337,7 +1362,7 @@ // After a runout is detected, continue printing this length of filament // before executing the runout script. Useful for a sensor at the end of // a feed tube. Requires 4 bytes SRAM per sensor, plus 4 bytes overhead. - //#define FILAMENT_RUNOUT_DISTANCE_MM 25 + //#define FILAMENT_RUNOUT_DISTANCE_MM 20 #ifdef FILAMENT_RUNOUT_DISTANCE_MM // Enable this option to use an encoder disc that toggles the runout pin @@ -1387,7 +1412,7 @@ */ //#define AUTO_BED_LEVELING_3POINT //#define AUTO_BED_LEVELING_LINEAR -//#define AUTO_BED_LEVELING_BILINEAR +//#define AUTO_BED_LEVELING_BILINEAR // ENABLE FOR BLTOUCH //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING @@ -1396,16 +1421,16 @@ * these options to restore the prior leveling state or to always enable * leveling immediately after G28. */ -//#define RESTORE_LEVELING_AFTER_G28 +//#define RESTORE_LEVELING_AFTER_G28 // ENABLE FOR BLTOUCH //#define ENABLE_LEVELING_AFTER_G28 /** * Auto-leveling needs preheating */ -//#define PREHEAT_BEFORE_LEVELING +//#define PREHEAT_BEFORE_LEVELING // ENABLE FOR BLTOUCH #if ENABLED(PREHEAT_BEFORE_LEVELING) #define LEVELING_NOZZLE_TEMP 120 // (°C) Only applies to E0 at this time - #define LEVELING_BED_TEMP 50 + #define LEVELING_BED_TEMP 65 #endif /** @@ -1442,8 +1467,8 @@ #if ENABLED(G26_MESH_VALIDATION) #define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle. #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for G26. - #define MESH_TEST_HOTEND_TEMP 205 // (°C) Default nozzle temperature for G26. - #define MESH_TEST_BED_TEMP 60 // (°C) Default bed temperature for G26. + #define MESH_TEST_HOTEND_TEMP 210 // (°C) Default nozzle temperature for G26. + #define MESH_TEST_BED_TEMP 65 // (°C) Default bed temperature for G26. #define G26_XY_FEEDRATE 20 // (mm/s) Feedrate for G26 XY moves. #define G26_XY_FEEDRATE_TRAVEL 100 // (mm/s) Feedrate for G26 XY travel moves. #define G26_RETRACT_MULTIPLIER 1.0 // G26 Q (retraction) used by default between mesh test elements. @@ -1454,7 +1479,7 @@ #if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR) // Set the number of grid points per dimension. - #define GRID_MAX_POINTS_X 3 + #define GRID_MAX_POINTS_X 10 #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X // Probe along the Y axis, advancing X after each column @@ -1587,7 +1612,7 @@ // - Move the Z probe (or nozzle) to a defined XY point before Z Homing. // - Prevent Z homing when the Z probe is outside bed area. // -//#define Z_SAFE_HOMING +#define Z_SAFE_HOMING #if ENABLED(Z_SAFE_HOMING) #define Z_SAFE_HOMING_X_POINT X_CENTER // X point for Z homing @@ -1595,7 +1620,7 @@ #endif // Homing speeds (mm/min) -#define HOMING_FEEDRATE_MM_M { (50*60), (50*60), (4*60) } +#define HOMING_FEEDRATE_MM_M { (50*100), (50*60), (4*60) } // Validate that endstops are triggered on homing moves #define VALIDATE_HOMING_ENDSTOPS @@ -1672,12 +1697,12 @@ * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) */ -//#define EEPROM_SETTINGS // Persistent storage with M500 and M501 +#define EEPROM_SETTINGS // Persistent storage with M500 and M501 //#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! -#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. +//#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. #define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load #if ENABLED(EEPROM_SETTINGS) - //#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. + #define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. #endif // @@ -1706,16 +1731,16 @@ // Preheat Constants - Up to 5 are supported without changes // #define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 180 -#define PREHEAT_1_TEMP_BED 70 +#define PREHEAT_1_TEMP_HOTEND 220 +#define PREHEAT_1_TEMP_BED 65 #define PREHEAT_1_TEMP_CHAMBER 35 -#define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 +#define PREHEAT_1_FAN_SPEED 255 // Value from 0 to 255 #define PREHEAT_2_LABEL "ABS" #define PREHEAT_2_TEMP_HOTEND 240 -#define PREHEAT_2_TEMP_BED 110 +#define PREHEAT_2_TEMP_BED 70 #define PREHEAT_2_TEMP_CHAMBER 35 -#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 +#define PREHEAT_2_FAN_SPEED 255 // Value from 0 to 255 /** * Nozzle Park @@ -1728,7 +1753,7 @@ * P1 Raise the nozzle always to Z-park height. * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. */ -//#define NOZZLE_PARK_FEATURE +#define NOZZLE_PARK_FEATURE #if ENABLED(NOZZLE_PARK_FEATURE) // Specify a park position as { X, Y, Z_raise } @@ -1936,7 +1961,7 @@ * SD Card support is disabled by default. If your controller has an SD slot, * you must uncomment the following option or it won't work. */ -//#define SDSUPPORT +#define SDSUPPORT /** * SD CARD: ENABLE CRC @@ -2014,7 +2039,7 @@ // If you have a speaker that can produce tones, enable it here. // By default Marlin assumes you have a buzzer with a fixed frequency. // -//#define SPEAKER +#define SPEAKER // // The duration and frequency for the UI feedback sound. @@ -2287,7 +2312,10 @@ // This is RAMPS-compatible using a single 10-pin connector. // (For CR-10 owners who want to replace the Melzi Creality board but retain the display) // -//#define CR10_STOCKDISPLAY +#define CR10_STOCKDISPLAY +#if ENABLED(CR10_STOCKDISPLAY) + #define RET6_12864_LCD // Specific to the SoC (can either be RET / VET) +#endif // // Ender-2 OEM display, a variant of the MKS_MINI_12864 @@ -2422,7 +2450,7 @@ // //#define NEXTION_TFT #if ENABLED(NEXTION_TFT) - #define LCD_SERIAL_PORT 1 // Default is 1 for Nextion + #define LCD_SERIAL_PORT 1 #endif // diff --git a/config/examples/Creality/Ender-3 Max/Configuration_adv.h b/config/examples/Creality/Ender-3 Max/Configuration_adv.h index 5335fa012a..063f198309 100644 --- a/config/examples/Creality/Ender-3 Max/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 Max/Configuration_adv.h @@ -1,6 +1,6 @@ /** * Marlin 3D Printer Firmware - * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * Copyright (c) 2021 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * * Based on Sprinter and grbl. * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Creality/Ender-3 Max" + /** * Configuration_adv.h * @@ -258,7 +260,7 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 20 // Seconds + #define WATCH_TEMP_PERIOD 120 // Seconds #define WATCH_TEMP_INCREASE 2 // Degrees Celsius #endif @@ -266,13 +268,13 @@ * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_BED_PERIOD 100 // Seconds #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds + #define WATCH_BED_TEMP_PERIOD 100 // Seconds #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius #endif @@ -741,7 +743,7 @@ //#define HOMING_BACKOFF_POST_MM { 2, 2, 2 } // (mm) Backoff from endstops after homing -//#define QUICK_HOME // If G28 contains XY do a diagonal move first +#define QUICK_HOME // If G28 contains XY do a diagonal move first //#define HOME_Y_BEFORE_X // If G28 contains XY home Y before X //#define HOME_Z_FIRST // Home Z first. Requires a Z-MIN endstop (not a probe). //#define CODEPENDENT_XY_HOMING // If X/Y can't home without homing Y/X first @@ -766,7 +768,7 @@ // Safety: The probe needs time to recognize the command. // Minimum command delay (ms). Enable and increase if needed. - //#define BLTOUCH_DELAY 500 + #define BLTOUCH_DELAY 500 /** * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones: @@ -792,7 +794,7 @@ * differs, a mode set eeprom write will be completed at initialization. * Use the option below to force an eeprom write to a V3.1 probe regardless. */ - //#define BLTOUCH_SET_5V_MODE + #define BLTOUCH_SET_5V_MODE /** * Safety: Activate if connecting a probe with an unknown voltage mode. @@ -867,7 +869,7 @@ // On a 300mm bed a 5% grade would give a misalignment of ~1.5cm #define G34_MAX_GRADE 5 // (%) Maximum incline that G34 will handle - #define Z_STEPPER_ALIGN_ITERATIONS 5 // Number of iterations to apply during alignment + #define Z_STEPPER_ALIGN_ITERATIONS 3 // Number of iterations to apply during alignment #define Z_STEPPER_ALIGN_ACC 0.02 // Stop iterating early if the accuracy is better than this #define RESTORE_LEVELING_AFTER_G34 // Restore leveling after G34 is done? // After G34, re-home Z (G28 Z) or just calculate it from the last probe heights? @@ -936,7 +938,7 @@ #define DEFAULT_MINTRAVELFEEDRATE 0.0 // (mm/s) Minimum travel feedrate. Set with M205 T. // Minimum time that a segment needs to take as the buffer gets emptied -#define DEFAULT_MINSEGMENTTIME 20000 // (µs) Set with M205 B. +#define DEFAULT_MINSEGMENTTIME 50000 // (µs) Set with M205 B. // was 20000 // Slow down the machine if the lookahead buffer is (by default) half full. // Increase the slowdown divisor for larger buffer sizes. @@ -1059,7 +1061,7 @@ * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the * lowest stepping frequencies. */ -//#define ADAPTIVE_STEP_SMOOTHING +#define ADAPTIVE_STEP_SMOOTHING /** * Custom Microstepping @@ -1175,7 +1177,7 @@ #endif // Include a page of printer information in the LCD Main Menu - //#define LCD_INFO_MENU + #define LCD_INFO_MENU #if ENABLED(LCD_INFO_MENU) //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages #endif @@ -1229,7 +1231,7 @@ #endif // Scroll a longer status message into view - //#define STATUS_MESSAGE_SCROLLING + #define STATUS_MESSAGE_SCROLLING // On the Info Screen, display XY with one decimal place when possible //#define LCD_DECIMAL_SMALL_XY @@ -1315,9 +1317,9 @@ * an option on the LCD screen to continue the print from the last-known * point in the file. */ - //#define POWER_LOSS_RECOVERY + #define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) - #define PLR_ENABLED_DEFAULT false // Power Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + #define PLR_ENABLED_DEFAULT true // Power Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) //#define BACKUP_POWER_SUPPLY // Backup power / UPS to move the steppers on power loss //#define POWER_LOSS_ZRAISE 2 // (mm) Z axis raise on resume (on power loss with UPS) //#define POWER_LOSS_PIN 44 // Pin to detect power loss. Set to -1 to disable default pin on boards without module. @@ -1361,17 +1363,17 @@ * - SDSORT_CACHE_NAMES will retain the sorted file listing in RAM. (Expensive!) * - SDSORT_DYNAMIC_RAM only uses RAM when the SD menu is visible. (Use with caution!) */ - //#define SDCARD_SORT_ALPHA + #define SDCARD_SORT_ALPHA // SD Card Sorting options #if ENABLED(SDCARD_SORT_ALPHA) #define SDSORT_LIMIT 40 // Maximum number of sorted items (10-256). Costs 27 bytes each. #define FOLDER_SORTING -1 // -1=above 0=none 1=below #define SDSORT_GCODE false // Allow turning sorting on/off with LCD and M34 G-code. - #define SDSORT_USES_RAM false // Pre-allocate a static array for faster pre-sorting. + #define SDSORT_USES_RAM true // Pre-allocate a static array for faster pre-sorting. #define SDSORT_USES_STACK false // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.) - #define SDSORT_CACHE_NAMES false // Keep sorted items in RAM longer for speedy performance. Most expensive option. - #define SDSORT_DYNAMIC_RAM false // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use! + #define SDSORT_CACHE_NAMES true // Keep sorted items in RAM longer for speedy performance. Most expensive option. + #define SDSORT_DYNAMIC_RAM true // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use! #define SDSORT_CACHE_VFATS 2 // Maximum number of 13-byte VFAT entries to use for sorting. // Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM. #endif @@ -1384,7 +1386,7 @@ //#define LONG_FILENAME_HOST_SUPPORT // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES + #define SCROLL_LONG_FILENAMES // Leave the heaters on after Stop Print (not recommended!) //#define SD_ABORT_NO_COOLDOWN @@ -1790,10 +1792,10 @@ * * Warning: Does not respect endstops! */ -//#define BABYSTEPPING +#define BABYSTEPPING #if ENABLED(BABYSTEPPING) //#define INTEGRATED_BABYSTEPPING // EXPERIMENTAL integration of babystepping into the Stepper ISR - //#define BABYSTEP_WITHOUT_HOMING + #define BABYSTEP_WITHOUT_HOMING //#define BABYSTEP_ALWAYS_AVAILABLE // Allow babystepping at all times (not just during movement). //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way @@ -1813,6 +1815,7 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 + // ENABLE FOR BLTOUCH //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping #if ENABLED(BABYSTEP_ZPROBE_OFFSET) //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets @@ -1837,12 +1840,12 @@ * * See https://marlinfw.org/docs/features/lin_advance.html for full instructions. */ -//#define LIN_ADVANCE +#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) //#define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants - #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed + #define LIN_ADVANCE_K 0 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // If enabled, this will generate debug information output over USB. - //#define EXPERIMENTAL_SCURVE // Enable this option to permit S-Curve Acceleration + #define EXPERIMENTAL_SCURVE // Enable this option to permit S-Curve Acceleration #endif // @section leveling @@ -2082,7 +2085,7 @@ #if BOTH(SDSUPPORT, DIRECT_STEPPING) #define BLOCK_BUFFER_SIZE 8 #elif ENABLED(SDSUPPORT) - #define BLOCK_BUFFER_SIZE 16 + #define BLOCK_BUFFER_SIZE 32 #else #define BLOCK_BUFFER_SIZE 16 #endif @@ -2091,7 +2094,7 @@ // The ASCII buffer for serial input #define MAX_CMD_SIZE 96 -#define BUFSIZE 4 +#define BUFSIZE 32 // Transmission to Host Buffer Size // To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0. @@ -2311,12 +2314,12 @@ * * Enable PARK_HEAD_ON_PAUSE to add the G-code M125 Pause and Park. */ -//#define ADVANCED_PAUSE_FEATURE +#define ADVANCED_PAUSE_FEATURE #if ENABLED(ADVANCED_PAUSE_FEATURE) #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. // This short retract is done immediately, before parking the nozzle. - #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast. + #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 20 // (mm/s) Unload filament feedrate. This can be pretty fast. #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. #define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload. // For Bowden, the full length of the tube and nozzle. @@ -2325,7 +2328,7 @@ #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE 6 // (mm/s) Slow move when starting load. #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 0 // (mm) Slow length, to allow time to insert material. // 0 to disable start loading and skip to fast load only - #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast. + #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 20 // (mm/s) Load filament feedrate. This can be pretty fast. #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle. // For Bowden, the full length of the tube and nozzle. @@ -2345,11 +2348,11 @@ #define FILAMENT_UNLOAD_PURGE_LENGTH 8 // (mm) An unretract is done, then this length is purged. #define FILAMENT_UNLOAD_PURGE_FEEDRATE 25 // (mm/s) feedrate to purge before unload - #define PAUSE_PARK_NOZZLE_TIMEOUT 45 // (seconds) Time limit before the nozzle is turned off for safety. + #define PAUSE_PARK_NOZZLE_TIMEOUT 60 // (seconds) Time limit before the nozzle is turned off for safety. #define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed. #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change. - //#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. + #define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. //#define HOME_BEFORE_FILAMENT_CHANGE // If needed, home before parking for filament change //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. @@ -2493,7 +2496,7 @@ #define INTERPOLATE true #if AXIS_IS_TMC(X) - #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. + #define X_CURRENT 580 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for sensorless homing #define X_MICROSTEPS 16 // 0..256 #define X_RSENSE 0.11 @@ -2511,7 +2514,7 @@ #endif #if AXIS_IS_TMC(Y) - #define Y_CURRENT 800 + #define Y_CURRENT 580 #define Y_CURRENT_HOME Y_CURRENT #define Y_MICROSTEPS 16 #define Y_RSENSE 0.11 @@ -2529,7 +2532,7 @@ #endif #if AXIS_IS_TMC(Z) - #define Z_CURRENT 800 + #define Z_CURRENT 580 #define Z_CURRENT_HOME Z_CURRENT #define Z_MICROSTEPS 16 #define Z_RSENSE 0.11 @@ -2565,7 +2568,7 @@ #endif #if AXIS_IS_TMC(E0) - #define E0_CURRENT 800 + #define E0_CURRENT 650 #define E0_MICROSTEPS 16 #define E0_RSENSE 0.11 #define E0_CHAIN_POS -1 @@ -2719,7 +2722,7 @@ * Define your own with: * { , , hysteresis_start[1..8] } */ - #define CHOPPER_TIMING CHOPPER_DEFAULT_12V // All axes (override below) + #define CHOPPER_TIMING CHOPPER_DEFAULT_24V // All axes (override below) //#define CHOPPER_TIMING_X CHOPPER_TIMING // For X Axes (override below) //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X //#define CHOPPER_TIMING_Y CHOPPER_TIMING // For Y Axes (override below) @@ -2839,7 +2842,7 @@ * Beta feature! * Create a 50/50 square wave step pulse optimal for stepper drivers. */ - //#define SQUARE_WAVE_STEPPING + #define SQUARE_WAVE_STEPPING /** * Enable M122 debugging command for TMC stepper drivers. @@ -3650,9 +3653,9 @@ * Host Prompt Support enables Marlin to use the host for user prompts so * filament runout and other processes can be managed from the host side. */ -//#define HOST_ACTION_COMMANDS +#define HOST_ACTION_COMMANDS #if ENABLED(HOST_ACTION_COMMANDS) - //#define HOST_PROMPT_SUPPORT + #define HOST_PROMPT_SUPPORT //#define HOST_START_MENU_ITEM // Add a menu item that tells the host to start #endif diff --git a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR 1.4 Turbo/Configuration.h b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR 1.4 Turbo/Configuration.h index 78c2dc9160..f77aae82c4 100644 --- a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR 1.4 Turbo/Configuration.h +++ b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR 1.4 Turbo/Configuration.h @@ -1,6 +1,6 @@ /** * Marlin 3D Printer Firmware - * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * Copyright (c) 2021 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * * Based on Sprinter and grbl. * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Creality/Ender-3 Pro/BigTreeTech SKR 1.4 Turbo" + /** * Configuration.h * @@ -69,7 +71,7 @@ // @section info // Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes. +#define STRING_CONFIG_H_AUTHOR "(NiXXiN, Ender-3 Pro SKR 1.4T)" // Who made the changes. //#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) /** @@ -87,7 +89,7 @@ #define SHOW_BOOTSCREEN // Show the bitmap in Marlin/_Bootscreen.h on startup. -//#define SHOW_CUSTOM_BOOTSCREEN +#define SHOW_CUSTOM_BOOTSCREEN // Show the bitmap in Marlin/_Statusscreen.h on the status screen. //#define CUSTOM_STATUS_SCREEN_IMAGE @@ -109,7 +111,7 @@ * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] */ -//#define SERIAL_PORT_2 -1 +#define SERIAL_PORT_2 -1 /** * Select a third serial port on the board to use for communication with the host. @@ -134,7 +136,7 @@ // Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_RAMPS_14_EFB + #define MOTHERBOARD BOARD_BTT_SKR_V1_4_TURBO #endif // Name displayed in the LCD "Ready" message and Info menu @@ -424,7 +426,7 @@ #define TEMP_SENSOR_5 0 #define TEMP_SENSOR_6 0 #define TEMP_SENSOR_7 0 -#define TEMP_SENSOR_BED 0 +#define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 #define TEMP_SENSOR_COOLER 0 @@ -480,7 +482,7 @@ #define HEATER_5_MAXTEMP 275 #define HEATER_6_MAXTEMP 275 #define HEATER_7_MAXTEMP 275 -#define BED_MAXTEMP 150 +#define BED_MAXTEMP 120 #define CHAMBER_MAXTEMP 60 /** @@ -627,14 +629,14 @@ * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** */ #define PREVENT_COLD_EXTRUSION -#define EXTRUDE_MINTEMP 170 +#define EXTRUDE_MINTEMP 180 /** * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. * Note: For Bowden Extruders make this large enough to allow load/unload. */ #define PREVENT_LENGTHY_EXTRUDE -#define EXTRUDE_MAXLENGTH 200 +#define EXTRUDE_MAXLENGTH 450 //=========================================================================== //======================== Thermal Runaway Protection ======================= @@ -743,15 +745,15 @@ * TMC5130, TMC5130_STANDALONE, TMC5160, TMC5160_STANDALONE * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'L6474', 'POWERSTEP01', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2160', 'TMC2160_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC2209', 'TMC2209_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE', 'TMC5160', 'TMC5160_STANDALONE'] */ -#define X_DRIVER_TYPE A4988 -#define Y_DRIVER_TYPE A4988 -#define Z_DRIVER_TYPE A4988 +#define X_DRIVER_TYPE TMC2209 +#define Y_DRIVER_TYPE TMC2209 +#define Z_DRIVER_TYPE TMC2209 //#define X2_DRIVER_TYPE A4988 //#define Y2_DRIVER_TYPE A4988 //#define Z2_DRIVER_TYPE A4988 //#define Z3_DRIVER_TYPE A4988 //#define Z4_DRIVER_TYPE A4988 -#define E0_DRIVER_TYPE A4988 +#define E0_DRIVER_TYPE TMC2209 //#define E1_DRIVER_TYPE A4988 //#define E2_DRIVER_TYPE A4988 //#define E3_DRIVER_TYPE A4988 @@ -806,14 +808,14 @@ * Override with M92 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 500 } +#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 141 } /** * Default Max Feed Rate (mm/s) * Override with M203 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 } +#define DEFAULT_MAX_FEEDRATE { 500, 500, 10, 25 } //#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 #if ENABLED(LIMITED_MAX_FR_EDITING) @@ -826,11 +828,11 @@ * Override with M201 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 } +#define DEFAULT_MAX_ACCELERATION { 500, 500, 100, 5000 } //#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 #if ENABLED(LIMITED_MAX_ACCEL_EDITING) - #define MAX_ACCEL_EDIT_VALUES { 6000, 6000, 200, 20000 } // ...or, set your own edit limits + #define MAX_ACCEL_EDIT_VALUES { 3000, 3000, 100, 5000 } // ...or, set your own edit limits #endif /** @@ -841,9 +843,9 @@ * M204 R Retract Acceleration * M204 T Travel Acceleration */ -#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves +#define DEFAULT_ACCELERATION 500 // X, Y, Z and E acceleration for printing moves +#define DEFAULT_RETRACT_ACCELERATION 500 // E acceleration for retracts +#define DEFAULT_TRAVEL_ACCELERATION 2000 // X, Y, Z acceleration for travel (non printing) moves /** * Default Jerk limits (mm/s) @@ -877,7 +879,7 @@ * https://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html */ #if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.013 // (mm) Distance from real junction edge + #define JUNCTION_DEVIATION_MM 0.08 // (mm) Distance from real junction edge #define JD_HANDLE_SMALL_SEGMENTS // Use curvature estimation instead of just the junction angle // for small segments (< 1mm) with large junction angles (> 135°). #endif @@ -906,10 +908,10 @@ * The probe replaces the Z-MIN endstop and is used for Z homing. * (Automatically enables USE_PROBE_FOR_Z_HOMING.) */ -#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN +//#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN // Force the use of the probe for Z-axis homing -//#define USE_PROBE_FOR_Z_HOMING +#define USE_PROBE_FOR_Z_HOMING /** * Z_MIN_PROBE_PIN @@ -963,7 +965,7 @@ /** * The BLTouch probe uses a Hall effect sensor and emulates a servo. */ -//#define BLTOUCH +#define BLTOUCH /** * Touch-MI Probe by hotends.fr @@ -1055,17 +1057,17 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +#define NOZZLE_TO_PROBE_OFFSET { -45, -8, 0 } // Most probes should stay away from the edges of the bed, but // with NOZZLE_AS_PROBE this can be negative for a wider probing area. -#define PROBING_MARGIN 10 +#define PROBING_MARGIN 20 // X and Y axis travel speed (mm/min) between probes #define XY_PROBE_FEEDRATE (133*60) // Feedrate (mm/min) for the first approach when double-probing (MULTIPLE_PROBING == 2) -#define Z_PROBE_FEEDRATE_FAST (4*60) +#define Z_PROBE_FEEDRATE_FAST (5*60) // Feedrate (mm/min) for the "accurate" probe of each point #define Z_PROBE_FEEDRATE_SLOW (Z_PROBE_FEEDRATE_FAST / 2) @@ -1150,12 +1152,12 @@ * These options are most useful for the BLTouch probe, but may also improve * readings with inductive probes and piezo sensors. */ -//#define PROBING_HEATERS_OFF // Turn heaters off when probing +#define PROBING_HEATERS_OFF // Turn heaters off when probing #if ENABLED(PROBING_HEATERS_OFF) //#define WAIT_FOR_BED_HEATER // Wait for bed to heat back up between probes (to improve accuracy) //#define WAIT_FOR_HOTEND // Wait for hotend to heat back up between probes (to improve accuracy & prevent cold extrude) #endif -//#define PROBING_FANS_OFF // Turn fans off when probing +#define PROBING_FANS_OFF // Turn fans off when probing //#define PROBING_STEPPERS_OFF // Turn steppers off (unless needed to hold position) when probing //#define DELAY_BEFORE_PROBING 200 // (ms) To prevent vibrations from triggering piezo sensors @@ -1190,14 +1192,14 @@ // @section machine // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR false +#define INVERT_X_DIR true #define INVERT_Y_DIR true #define INVERT_Z_DIR false // @section extruder // For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR false +#define INVERT_E0_DIR true #define INVERT_E1_DIR false #define INVERT_E2_DIR false #define INVERT_E3_DIR false @@ -1232,8 +1234,8 @@ // @section machine // The size of the printable area -#define X_BED_SIZE 200 -#define Y_BED_SIZE 200 +#define X_BED_SIZE 235 +#define Y_BED_SIZE 235 // Travel limits (mm) after homing, corresponding to endstop positions. #define X_MIN_POS 0 @@ -1241,7 +1243,7 @@ #define Z_MIN_POS 0 #define X_MAX_POS X_BED_SIZE #define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 200 +#define Z_MAX_POS 250 /** * Software Endstops @@ -1257,7 +1259,7 @@ #if ENABLED(MIN_SOFTWARE_ENDSTOPS) #define MIN_SOFTWARE_ENDSTOP_X #define MIN_SOFTWARE_ENDSTOP_Y - #define MIN_SOFTWARE_ENDSTOP_Z + //#define MIN_SOFTWARE_ENDSTOP_Z #endif // Max software endstops constrain movement within maximum coordinate bounds @@ -1387,7 +1389,7 @@ */ //#define AUTO_BED_LEVELING_3POINT //#define AUTO_BED_LEVELING_LINEAR -//#define AUTO_BED_LEVELING_BILINEAR +#define AUTO_BED_LEVELING_BILINEAR //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING @@ -1454,7 +1456,7 @@ #if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR) // Set the number of grid points per dimension. - #define GRID_MAX_POINTS_X 3 + #define GRID_MAX_POINTS_X 5 #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X // Probe along the Y axis, advancing X after each column @@ -1464,7 +1466,7 @@ // Beyond the probed grid, continue the implied tilt? // Default is to maintain the height of the nearest edge. - //#define EXTRAPOLATE_BEYOND_GRID + #define EXTRAPOLATE_BEYOND_GRID // // Experimental Subdivision of the grid by Catmull-Rom method. @@ -1518,7 +1520,7 @@ * Add a bed leveling sub-menu for ABL or MBL. * Include a guided procedure if manual probing is enabled. */ -//#define LCD_BED_LEVELING +#define LCD_BED_LEVELING #if ENABLED(LCD_BED_LEVELING) #define MESH_EDIT_Z_STEP 0.025 // (mm) Step size while manually probing Z axis. @@ -1587,7 +1589,7 @@ // - Move the Z probe (or nozzle) to a defined XY point before Z Homing. // - Prevent Z homing when the Z probe is outside bed area. // -//#define Z_SAFE_HOMING +#define Z_SAFE_HOMING #if ENABLED(Z_SAFE_HOMING) #define Z_SAFE_HOMING_X_POINT X_CENTER // X point for Z homing @@ -1595,7 +1597,7 @@ #endif // Homing speeds (mm/min) -#define HOMING_FEEDRATE_MM_M { (50*60), (50*60), (4*60) } +#define HOMING_FEEDRATE_MM_M { (50*60), (50*60), (5*60) } // Validate that endstops are triggered on homing moves #define VALIDATE_HOMING_ENDSTOPS @@ -1672,7 +1674,7 @@ * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) */ -//#define EEPROM_SETTINGS // Persistent storage with M500 and M501 +#define EEPROM_SETTINGS // Persistent storage with M500 and M501 //#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. #define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load @@ -1706,8 +1708,8 @@ // Preheat Constants - Up to 5 are supported without changes // #define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 180 -#define PREHEAT_1_TEMP_BED 70 +#define PREHEAT_1_TEMP_HOTEND 200 +#define PREHEAT_1_TEMP_BED 50 #define PREHEAT_1_TEMP_CHAMBER 35 #define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 @@ -1728,16 +1730,16 @@ * P1 Raise the nozzle always to Z-park height. * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. */ -//#define NOZZLE_PARK_FEATURE +#define NOZZLE_PARK_FEATURE #if ENABLED(NOZZLE_PARK_FEATURE) // Specify a park position as { X, Y, Z_raise } - #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 } + #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MIN_POS + 10), 20 } //#define NOZZLE_PARK_X_ONLY // X move only is required to park //#define NOZZLE_PARK_Y_ONLY // Y move only is required to park #define NOZZLE_PARK_Z_RAISE_MIN 2 // (mm) Always raise Z by at least this distance - #define NOZZLE_PARK_XY_FEEDRATE 100 // (mm/s) X and Y axes feedrate (also used for delta Z axis) - #define NOZZLE_PARK_Z_FEEDRATE 5 // (mm/s) Z axis feedrate (not used for delta printers) + #define NOZZLE_PARK_XY_FEEDRATE 200 // (mm/s) X and Y axes feedrate (also used for delta Z axis) + #define NOZZLE_PARK_Z_FEEDRATE 10 // (mm/s) Z axis feedrate (not used for delta printers) #endif /** @@ -1845,7 +1847,7 @@ * * View the current statistics with M78. */ -//#define PRINTCOUNTER +#define PRINTCOUNTER #if ENABLED(PRINTCOUNTER) #define PRINTCOUNTER_SAVE_INTERVAL 60 // (minutes) EEPROM save interval during print #endif @@ -1936,7 +1938,7 @@ * SD Card support is disabled by default. If your controller has an SD slot, * you must uncomment the following option or it won't work. */ -//#define SDSUPPORT +#define SDSUPPORT /** * SD CARD: ENABLE CRC @@ -2006,7 +2008,7 @@ // // Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. // -//#define INDIVIDUAL_AXIS_HOMING_MENU +#define INDIVIDUAL_AXIS_HOMING_MENU // // SPEAKER/BUZZER @@ -2014,7 +2016,7 @@ // If you have a speaker that can produce tones, enable it here. // By default Marlin assumes you have a buzzer with a fixed frequency. // -//#define SPEAKER +#define SPEAKER // // The duration and frequency for the UI feedback sound. @@ -2287,7 +2289,7 @@ // This is RAMPS-compatible using a single 10-pin connector. // (For CR-10 owners who want to replace the Melzi Creality board but retain the display) // -//#define CR10_STOCKDISPLAY +#define CR10_STOCKDISPLAY // // Ender-2 OEM display, a variant of the MKS_MINI_12864 diff --git a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR 1.4 Turbo/Configuration_adv.h b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR 1.4 Turbo/Configuration_adv.h index 5335fa012a..200d094d24 100644 --- a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR 1.4 Turbo/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR 1.4 Turbo/Configuration_adv.h @@ -1,6 +1,6 @@ /** * Marlin 3D Printer Firmware - * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * Copyright (c) 2021 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * * Based on Sprinter and grbl. * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Creality/Ender-3 Pro/BigTreeTech SKR 1.4 Turbo" + /** * Configuration_adv.h * @@ -540,7 +542,7 @@ * Multiple extruders can be assigned to the same pin in which case * the fan will turn on when any selected extruder is above the threshold. */ -#define E0_AUTO_FAN_PIN -1 +#define E0_AUTO_FAN_PIN P2_04 #define E1_AUTO_FAN_PIN -1 #define E2_AUTO_FAN_PIN -1 #define E3_AUTO_FAN_PIN -1 @@ -741,7 +743,7 @@ //#define HOMING_BACKOFF_POST_MM { 2, 2, 2 } // (mm) Backoff from endstops after homing -//#define QUICK_HOME // If G28 contains XY do a diagonal move first +#define QUICK_HOME // If G28 contains XY do a diagonal move first //#define HOME_Y_BEFORE_X // If G28 contains XY home Y before X //#define HOME_Z_FIRST // Home Z first. Requires a Z-MIN endstop (not a probe). //#define CODEPENDENT_XY_HOMING // If X/Y can't home without homing Y/X first @@ -766,7 +768,7 @@ // Safety: The probe needs time to recognize the command. // Minimum command delay (ms). Enable and increase if needed. - //#define BLTOUCH_DELAY 500 + #define BLTOUCH_DELAY 500 /** * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones: @@ -792,7 +794,7 @@ * differs, a mode set eeprom write will be completed at initialization. * Use the option below to force an eeprom write to a V3.1 probe regardless. */ - //#define BLTOUCH_SET_5V_MODE + #define BLTOUCH_SET_5V_MODE /** * Safety: Activate if connecting a probe with an unknown voltage mode. @@ -1175,7 +1177,7 @@ #endif // Include a page of printer information in the LCD Main Menu - //#define LCD_INFO_MENU + #define LCD_INFO_MENU #if ENABLED(LCD_INFO_MENU) //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages #endif @@ -1184,7 +1186,7 @@ //#define TURBO_BACK_MENU_ITEM // Add a mute option to the LCD menu - //#define SOUND_MENU_ITEM + #define SOUND_MENU_ITEM /** * LED Control Menu @@ -1229,7 +1231,7 @@ #endif // Scroll a longer status message into view - //#define STATUS_MESSAGE_SCROLLING + #define STATUS_MESSAGE_SCROLLING // On the Info Screen, display XY with one decimal place when possible //#define LCD_DECIMAL_SMALL_XY @@ -1378,13 +1380,13 @@ // Allow international symbols in long filenames. To display correctly, the // LCD's font must contain the characters. Check your selected LCD language. - //#define UTF_FILENAME_SUPPORT + #define UTF_FILENAME_SUPPORT // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT + #define LONG_FILENAME_HOST_SUPPORT // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES + #define SCROLL_LONG_FILENAMES // Leave the heaters on after Stop Print (not recommended!) //#define SD_ABORT_NO_COOLDOWN @@ -1476,7 +1478,7 @@ * * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] */ - //#define SDCARD_CONNECTION LCD + #define SDCARD_CONNECTION ONBOARD // Enable if SD detect is rendered useless (e.g., by using an SD extender) //#define NO_SD_DETECT @@ -1790,7 +1792,7 @@ * * Warning: Does not respect endstops! */ -//#define BABYSTEPPING +#define BABYSTEPPING #if ENABLED(BABYSTEPPING) //#define INTEGRATED_BABYSTEPPING // EXPERIMENTAL integration of babystepping into the Stepper ISR //#define BABYSTEP_WITHOUT_HOMING @@ -1801,7 +1803,7 @@ #define BABYSTEP_MULTIPLICATOR_Z 1 // (steps or mm) Steps or millimeter distance for each Z babystep #define BABYSTEP_MULTIPLICATOR_XY 1 // (steps or mm) Steps or millimeter distance for each XY babystep - //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. + #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. // Note: Extra time may be added to mitigate controller latency. @@ -1811,7 +1813,7 @@ #endif #endif - //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 + #define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping #if ENABLED(BABYSTEP_ZPROBE_OFFSET) @@ -1837,10 +1839,10 @@ * * See https://marlinfw.org/docs/features/lin_advance.html for full instructions. */ -//#define LIN_ADVANCE +#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) //#define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants - #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed + #define LIN_ADVANCE_K 0.56 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // If enabled, this will generate debug information output over USB. //#define EXPERIMENTAL_SCURVE // Enable this option to permit S-Curve Acceleration #endif @@ -1989,7 +1991,7 @@ #define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle //#define ARC_SEGMENTS_PER_SEC 50 // Use feedrate to choose segment length (with MM_PER_ARC_SEGMENT as the minimum) #define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections - //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles + #define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes //#define SF_ARC_FIX // Enable only if using SkeinForge with "Arc Point" fillet procedure #endif @@ -2050,7 +2052,7 @@ * * Override the default value based on the driver type set in Configuration.h. */ -//#define MINIMUM_STEPPER_PULSE 2 +#define MINIMUM_STEPPER_PULSE 1 /** * Maximum stepping rate (in Hz) the stepper driver allows @@ -2311,27 +2313,27 @@ * * Enable PARK_HEAD_ON_PAUSE to add the G-code M125 Pause and Park. */ -//#define ADVANCED_PAUSE_FEATURE +#define ADVANCED_PAUSE_FEATURE #if ENABLED(ADVANCED_PAUSE_FEATURE) #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. - #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. + #define PAUSE_PARK_RETRACT_LENGTH 6 // (mm) Initial retract. // This short retract is done immediately, before parking the nozzle. - #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast. + #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 100 // (mm/s) Unload filament feedrate. This can be pretty fast. #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload. + #define FILAMENT_CHANGE_UNLOAD_LENGTH 380 // (mm) The length of filament for a complete unload. // For Bowden, the full length of the tube and nozzle. // For direct drive, the full length of the nozzle. // Set to 0 for manual unloading. - #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE 6 // (mm/s) Slow move when starting load. - #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 0 // (mm) Slow length, to allow time to insert material. + #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE 10 // (mm/s) Slow move when starting load. + #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 50 // (mm) Slow length, to allow time to insert material. // 0 to disable start loading and skip to fast load only - #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast. + #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 20 // (mm/s) Load filament feedrate. This can be pretty fast. #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle. + #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 400 // (mm) Load length of filament, from extruder gear to nozzle. // For Bowden, the full length of the tube and nozzle. // For direct drive, the full length of the nozzle. //#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted. - #define ADVANCED_PAUSE_PURGE_FEEDRATE 3 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate. + #define ADVANCED_PAUSE_PURGE_FEEDRATE 5 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate. #define ADVANCED_PAUSE_PURGE_LENGTH 50 // (mm) Length to extrude after loading. // Set to 0 for manual extrusion. // Filament can be extruded repeatedly from the Filament Change menu @@ -2343,16 +2345,16 @@ #define FILAMENT_UNLOAD_PURGE_RETRACT 13 // (mm) Unload initial retract length. #define FILAMENT_UNLOAD_PURGE_DELAY 5000 // (ms) Delay for the filament to cool after retract. #define FILAMENT_UNLOAD_PURGE_LENGTH 8 // (mm) An unretract is done, then this length is purged. - #define FILAMENT_UNLOAD_PURGE_FEEDRATE 25 // (mm/s) feedrate to purge before unload + #define FILAMENT_UNLOAD_PURGE_FEEDRATE 60 // (mm/s) feedrate to purge before unload - #define PAUSE_PARK_NOZZLE_TIMEOUT 45 // (seconds) Time limit before the nozzle is turned off for safety. - #define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed. + #define PAUSE_PARK_NOZZLE_TIMEOUT 120 // (seconds) Time limit before the nozzle is turned off for safety. + #define FILAMENT_CHANGE_ALERT_BEEPS 15 // Number of alert beeps to play when a response is needed. #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change. - //#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. + #define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. //#define HOME_BEFORE_FILAMENT_CHANGE // If needed, home before parking for filament change - //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. + #define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) #endif @@ -2493,8 +2495,8 @@ #define INTERPOLATE true #if AXIS_IS_TMC(X) - #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. - #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for sensorless homing + #define X_CURRENT 580 // (mA) RMS current. Multiply by 1.414 for peak current. + #define X_CURRENT_HOME (X_CURRENT/2) // (mA) RMS current for sensorless homing #define X_MICROSTEPS 16 // 0..256 #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... @@ -2511,8 +2513,8 @@ #endif #if AXIS_IS_TMC(Y) - #define Y_CURRENT 800 - #define Y_CURRENT_HOME Y_CURRENT + #define Y_CURRENT 580 + #define Y_CURRENT_HOME (Y_CURRENT/2) #define Y_MICROSTEPS 16 #define Y_RSENSE 0.11 #define Y_CHAIN_POS -1 @@ -2529,7 +2531,7 @@ #endif #if AXIS_IS_TMC(Z) - #define Z_CURRENT 800 + #define Z_CURRENT 580 #define Z_CURRENT_HOME Z_CURRENT #define Z_MICROSTEPS 16 #define Z_RSENSE 0.11 @@ -2565,7 +2567,7 @@ #endif #if AXIS_IS_TMC(E0) - #define E0_CURRENT 800 + #define E0_CURRENT 650 #define E0_MICROSTEPS 16 #define E0_RSENSE 0.11 #define E0_CHAIN_POS -1 @@ -2719,7 +2721,7 @@ * Define your own with: * { , , hysteresis_start[1..8] } */ - #define CHOPPER_TIMING CHOPPER_DEFAULT_12V // All axes (override below) + #define CHOPPER_TIMING CHOPPER_DEFAULT_24V // All axes (override below) //#define CHOPPER_TIMING_X CHOPPER_TIMING // For X Axes (override below) //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X //#define CHOPPER_TIMING_Y CHOPPER_TIMING // For Y Axes (override below) @@ -2748,7 +2750,7 @@ * M912 - Clear stepper driver overtemperature pre-warn condition flag. * M122 - Report driver parameters (Requires TMC_DEBUG) */ - //#define MONITOR_DRIVER_STATUS + #define MONITOR_DRIVER_STATUS #if ENABLED(MONITOR_DRIVER_STATUS) #define CURRENT_STEP_DOWN 50 // [mA] @@ -2807,13 +2809,13 @@ * * Comment *_STALL_SENSITIVITY to disable sensorless homing for that axis. */ - //#define SENSORLESS_HOMING // StallGuard capable drivers only + #define SENSORLESS_HOMING // StallGuard capable drivers only #if EITHER(SENSORLESS_HOMING, SENSORLESS_PROBING) // TMC2209: 0...255. TMC2130: -64...63 - #define X_STALL_SENSITIVITY 8 + #define X_STALL_SENSITIVITY 70 #define X2_STALL_SENSITIVITY X_STALL_SENSITIVITY - #define Y_STALL_SENSITIVITY 8 + #define Y_STALL_SENSITIVITY 70 #define Y2_STALL_SENSITIVITY Y_STALL_SENSITIVITY //#define Z_STALL_SENSITIVITY 8 //#define Z2_STALL_SENSITIVITY Z_STALL_SENSITIVITY @@ -2839,13 +2841,13 @@ * Beta feature! * Create a 50/50 square wave step pulse optimal for stepper drivers. */ - //#define SQUARE_WAVE_STEPPING + #define SQUARE_WAVE_STEPPING /** * Enable M122 debugging command for TMC stepper drivers. * M122 S0/1 will enable continuous reporting. */ - //#define TMC_DEBUG + #define TMC_DEBUG /** * You can set your own advanced settings by filling in predefined functions. @@ -3439,7 +3441,7 @@ /** * Disable all Volumetric extrusion options */ -//#define NO_VOLUMETRICS +#define NO_VOLUMETRICS #if DISABLED(NO_VOLUMETRICS) /** @@ -4002,7 +4004,7 @@ // // M43 - display pin status, toggle pins, watch pins, watch endstops & toggle LED, test servo probe // -//#define PINS_DEBUGGING +#define PINS_DEBUGGING // Enable Marlin dev mode which adds some special commands //#define MARLIN_DEV_MODE diff --git a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.0/Configuration.h b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.0/Configuration.h index 78c2dc9160..73aa2c396a 100644 --- a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.0/Configuration.h +++ b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.0/Configuration.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.0" + /** * Configuration.h * @@ -69,7 +71,7 @@ // @section info // Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes. +#define STRING_CONFIG_H_AUTHOR "(thisiskeithb, Ender-3 Pro)" // Who made the changes. //#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) /** @@ -102,14 +104,14 @@ * * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] */ -#define SERIAL_PORT 0 +#define SERIAL_PORT 2 /** * Select a secondary serial port on the board to use for communication with the host. * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] */ -//#define SERIAL_PORT_2 -1 +#define SERIAL_PORT_2 -1 /** * Select a third serial port on the board to use for communication with the host. @@ -127,18 +129,18 @@ * * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ -#define BAUDRATE 250000 +#define BAUDRATE 115200 // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH // Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_RAMPS_14_EFB + #define MOTHERBOARD BOARD_BTT_SKR_MINI_E3_V1_0 #endif // Name displayed in the LCD "Ready" message and Info menu -//#define CUSTOM_MACHINE_NAME "3D Printer" +#define CUSTOM_MACHINE_NAME "Ender-3 Pro" // Printer's unique ID, used by some programs to differentiate between machines. // Choose your own or use a service like https://www.uuidgenerator.net/version4 @@ -424,7 +426,7 @@ #define TEMP_SENSOR_5 0 #define TEMP_SENSOR_6 0 #define TEMP_SENSOR_7 0 -#define TEMP_SENSOR_BED 0 +#define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 #define TEMP_SENSOR_COOLER 0 @@ -480,7 +482,7 @@ #define HEATER_5_MAXTEMP 275 #define HEATER_6_MAXTEMP 275 #define HEATER_7_MAXTEMP 275 -#define BED_MAXTEMP 150 +#define BED_MAXTEMP 125 #define CHAMBER_MAXTEMP 60 /** @@ -510,16 +512,17 @@ //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) // Set/get with gcode: M301 E[extruder number, 0-2] + // Creality Ender-3 Pro #if ENABLED(PID_PARAMS_PER_HOTEND) // Specify between 1 and HOTENDS values per array. // If fewer than EXTRUDER values are provided, the last element will be repeated. - #define DEFAULT_Kp_LIST { 22.20, 22.20 } - #define DEFAULT_Ki_LIST { 1.08, 1.08 } - #define DEFAULT_Kd_LIST { 114.00, 114.00 } + #define DEFAULT_Kp_LIST { 21.73, 21.73 } + #define DEFAULT_Ki_LIST { 1.54, 1.54 } + #define DEFAULT_Kd_LIST { 76.55, 76.55 } #else - #define DEFAULT_Kp 22.20 - #define DEFAULT_Ki 1.08 - #define DEFAULT_Kd 114.00 + #define DEFAULT_Kp 21.73 + #define DEFAULT_Ki 1.54 + #define DEFAULT_Kd 76.55 #endif #endif // PIDTEMP @@ -556,11 +559,10 @@ //#define MIN_BED_POWER 0 //#define PID_BED_DEBUG // Sends debug data to the serial port. - // 120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - // from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) - #define DEFAULT_bedKp 10.00 - #define DEFAULT_bedKi .023 - #define DEFAULT_bedKd 305.4 + // Creality Ender-3 Pro + #define DEFAULT_bedKp 50.71 + #define DEFAULT_bedKi 9.88 + #define DEFAULT_bedKd 173.43 // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. #endif // PIDTEMPBED @@ -634,7 +636,7 @@ * Note: For Bowden Extruders make this large enough to allow load/unload. */ #define PREVENT_LENGTHY_EXTRUDE -#define EXTRUDE_MAXLENGTH 200 +#define EXTRUDE_MAXLENGTH 600 //=========================================================================== //======================== Thermal Runaway Protection ======================= @@ -743,15 +745,15 @@ * TMC5130, TMC5130_STANDALONE, TMC5160, TMC5160_STANDALONE * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'L6474', 'POWERSTEP01', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2160', 'TMC2160_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC2209', 'TMC2209_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE', 'TMC5160', 'TMC5160_STANDALONE'] */ -#define X_DRIVER_TYPE A4988 -#define Y_DRIVER_TYPE A4988 -#define Z_DRIVER_TYPE A4988 +#define X_DRIVER_TYPE TMC2209 +#define Y_DRIVER_TYPE TMC2209 +#define Z_DRIVER_TYPE TMC2209 //#define X2_DRIVER_TYPE A4988 //#define Y2_DRIVER_TYPE A4988 //#define Z2_DRIVER_TYPE A4988 //#define Z3_DRIVER_TYPE A4988 //#define Z4_DRIVER_TYPE A4988 -#define E0_DRIVER_TYPE A4988 +#define E0_DRIVER_TYPE TMC2209 //#define E1_DRIVER_TYPE A4988 //#define E2_DRIVER_TYPE A4988 //#define E3_DRIVER_TYPE A4988 @@ -762,7 +764,7 @@ // Enable this feature if all enabled endstop pins are interrupt-capable. // This will remove the need to poll the interrupt pins, saving many CPU cycles. -//#define ENDSTOP_INTERRUPTS_FEATURE +#define ENDSTOP_INTERRUPTS_FEATURE /** * Endstop Noise Threshold @@ -806,14 +808,14 @@ * Override with M92 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 500 } +#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 93 } /** * Default Max Feed Rate (mm/s) * Override with M203 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 } +#define DEFAULT_MAX_FEEDRATE { 500, 500, 5, 25 } //#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 #if ENABLED(LIMITED_MAX_FR_EDITING) @@ -826,7 +828,7 @@ * Override with M201 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 } +#define DEFAULT_MAX_ACCELERATION { 500, 500, 100, 5000 } //#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 #if ENABLED(LIMITED_MAX_ACCEL_EDITING) @@ -841,9 +843,9 @@ * M204 R Retract Acceleration * M204 T Travel Acceleration */ -#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves +#define DEFAULT_ACCELERATION 500 // X, Y, Z and E acceleration for printing moves +#define DEFAULT_RETRACT_ACCELERATION 500 // E acceleration for retracts +#define DEFAULT_TRAVEL_ACCELERATION 500 // X, Y, Z acceleration for travel (non printing) moves /** * Default Jerk limits (mm/s) @@ -877,7 +879,7 @@ * https://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html */ #if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.013 // (mm) Distance from real junction edge + #define JUNCTION_DEVIATION_MM 0.08 // (mm) Distance from real junction edge #define JD_HANDLE_SMALL_SEGMENTS // Use curvature estimation instead of just the junction angle // for small segments (< 1mm) with large junction angles (> 135°). #endif @@ -890,7 +892,7 @@ * * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained */ -//#define S_CURVE_ACCELERATION +#define S_CURVE_ACCELERATION //=========================================================================== //============================= Z Probe Options ============================= @@ -906,7 +908,7 @@ * The probe replaces the Z-MIN endstop and is used for Z homing. * (Automatically enables USE_PROBE_FOR_Z_HOMING.) */ -#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN +//#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN // Force the use of the probe for Z-axis homing //#define USE_PROBE_FOR_Z_HOMING @@ -1185,19 +1187,19 @@ // @section extruder #define DISABLE_E false // Disable the extruder when not stepping -#define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled +//#define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled // @section machine // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR false +#define INVERT_X_DIR true #define INVERT_Y_DIR true #define INVERT_Z_DIR false // @section extruder // For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR false +#define INVERT_E0_DIR true #define INVERT_E1_DIR false #define INVERT_E2_DIR false #define INVERT_E3_DIR false @@ -1232,8 +1234,8 @@ // @section machine // The size of the printable area -#define X_BED_SIZE 200 -#define Y_BED_SIZE 200 +#define X_BED_SIZE 235 +#define Y_BED_SIZE 235 // Travel limits (mm) after homing, corresponding to endstop positions. #define X_MIN_POS 0 @@ -1241,7 +1243,7 @@ #define Z_MIN_POS 0 #define X_MAX_POS X_BED_SIZE #define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 200 +#define Z_MAX_POS 250 /** * Software Endstops @@ -1389,7 +1391,7 @@ //#define AUTO_BED_LEVELING_LINEAR //#define AUTO_BED_LEVELING_BILINEAR //#define AUTO_BED_LEVELING_UBL -//#define MESH_BED_LEVELING +#define MESH_BED_LEVELING /** * Normally G28 leaves leveling disabled on completion. Enable one of @@ -1454,7 +1456,7 @@ #if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR) // Set the number of grid points per dimension. - #define GRID_MAX_POINTS_X 3 + #define GRID_MAX_POINTS_X 5 #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X // Probe along the Y axis, advancing X after each column @@ -1464,7 +1466,7 @@ // Beyond the probed grid, continue the implied tilt? // Default is to maintain the height of the nearest edge. - //#define EXTRAPOLATE_BEYOND_GRID + #define EXTRAPOLATE_BEYOND_GRID // // Experimental Subdivision of the grid by Catmull-Rom method. @@ -1518,16 +1520,16 @@ * Add a bed leveling sub-menu for ABL or MBL. * Include a guided procedure if manual probing is enabled. */ -//#define LCD_BED_LEVELING +#define LCD_BED_LEVELING #if ENABLED(LCD_BED_LEVELING) #define MESH_EDIT_Z_STEP 0.025 // (mm) Step size while manually probing Z axis. #define LCD_PROBE_Z_RANGE 4 // (mm) Z Range centered on Z_MIN_POS for LCD Z adjustment - //#define MESH_EDIT_MENU // Add a menu to edit mesh points + #define MESH_EDIT_MENU // Add a menu to edit mesh points #endif // Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS +#define LEVEL_BED_CORNERS #if ENABLED(LEVEL_BED_CORNERS) #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets @@ -1595,7 +1597,7 @@ #endif // Homing speeds (mm/min) -#define HOMING_FEEDRATE_MM_M { (50*60), (50*60), (4*60) } +#define HOMING_FEEDRATE_MM_M { (20*60), (20*60), (4*60) } // Validate that endstops are triggered on homing moves #define VALIDATE_HOMING_ENDSTOPS @@ -1672,12 +1674,12 @@ * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) */ -//#define EEPROM_SETTINGS // Persistent storage with M500 and M501 +#define EEPROM_SETTINGS // Persistent storage with M500 and M501 //#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. #define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load #if ENABLED(EEPROM_SETTINGS) - //#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. + #define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. #endif // @@ -1706,16 +1708,16 @@ // Preheat Constants - Up to 5 are supported without changes // #define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 180 -#define PREHEAT_1_TEMP_BED 70 +#define PREHEAT_1_TEMP_HOTEND 185 +#define PREHEAT_1_TEMP_BED 45 #define PREHEAT_1_TEMP_CHAMBER 35 -#define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 +#define PREHEAT_1_FAN_SPEED 255 // Value from 0 to 255 #define PREHEAT_2_LABEL "ABS" #define PREHEAT_2_TEMP_HOTEND 240 #define PREHEAT_2_TEMP_BED 110 #define PREHEAT_2_TEMP_CHAMBER 35 -#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 +#define PREHEAT_2_FAN_SPEED 255 // Value from 0 to 255 /** * Nozzle Park @@ -1728,7 +1730,7 @@ * P1 Raise the nozzle always to Z-park height. * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. */ -//#define NOZZLE_PARK_FEATURE +#define NOZZLE_PARK_FEATURE #if ENABLED(NOZZLE_PARK_FEATURE) // Specify a park position as { X, Y, Z_raise } @@ -1921,7 +1923,7 @@ * * :['JAPANESE', 'WESTERN', 'CYRILLIC'] */ -#define DISPLAY_CHARSET_HD44780 JAPANESE +#define DISPLAY_CHARSET_HD44780 WESTERN /** * Info Screen Style (0:Classic, 1:Průša) @@ -1936,7 +1938,7 @@ * SD Card support is disabled by default. If your controller has an SD slot, * you must uncomment the following option or it won't work. */ -//#define SDSUPPORT +#define SDSUPPORT /** * SD CARD: ENABLE CRC @@ -2006,7 +2008,7 @@ // // Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. // -//#define INDIVIDUAL_AXIS_HOMING_MENU +#define INDIVIDUAL_AXIS_HOMING_MENU // // SPEAKER/BUZZER @@ -2287,7 +2289,7 @@ // This is RAMPS-compatible using a single 10-pin connector. // (For CR-10 owners who want to replace the Melzi Creality board but retain the display) // -//#define CR10_STOCKDISPLAY +#define CR10_STOCKDISPLAY // // Ender-2 OEM display, a variant of the MKS_MINI_12864 diff --git a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h index 5335fa012a..c971f5e839 100644 --- a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.0" + /** * Configuration_adv.h * @@ -741,7 +743,7 @@ //#define HOMING_BACKOFF_POST_MM { 2, 2, 2 } // (mm) Backoff from endstops after homing -//#define QUICK_HOME // If G28 contains XY do a diagonal move first +#define QUICK_HOME // If G28 contains XY do a diagonal move first //#define HOME_Y_BEFORE_X // If G28 contains XY home Y before X //#define HOME_Z_FIRST // Home Z first. Requires a Z-MIN endstop (not a probe). //#define CODEPENDENT_XY_HOMING // If X/Y can't home without homing Y/X first @@ -867,7 +869,7 @@ // On a 300mm bed a 5% grade would give a misalignment of ~1.5cm #define G34_MAX_GRADE 5 // (%) Maximum incline that G34 will handle - #define Z_STEPPER_ALIGN_ITERATIONS 5 // Number of iterations to apply during alignment + #define Z_STEPPER_ALIGN_ITERATIONS 3 // Number of iterations to apply during alignment #define Z_STEPPER_ALIGN_ACC 0.02 // Stop iterating early if the accuracy is better than this #define RESTORE_LEVELING_AFTER_G34 // Restore leveling after G34 is done? // After G34, re-home Z (G28 Z) or just calculate it from the last probe heights? @@ -1175,7 +1177,7 @@ #endif // Include a page of printer information in the LCD Main Menu - //#define LCD_INFO_MENU + #define LCD_INFO_MENU #if ENABLED(LCD_INFO_MENU) //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages #endif @@ -1229,13 +1231,13 @@ #endif // Scroll a longer status message into view - //#define STATUS_MESSAGE_SCROLLING + #define STATUS_MESSAGE_SCROLLING // On the Info Screen, display XY with one decimal place when possible //#define LCD_DECIMAL_SMALL_XY // Add an 'M73' G-code to set the current percentage - //#define LCD_SET_PROGRESS_MANUALLY + #define LCD_SET_PROGRESS_MANUALLY // Show the E position (filament used) during printing //#define LCD_SHOW_E_TOTAL @@ -1281,7 +1283,7 @@ //#define SD_DETECT_STATE HIGH //#define SD_IGNORE_AT_STARTUP // Don't mount the SD card when starting up - //#define SDCARD_READONLY // Read-only SD card (to save over 2K of flash) + #define SDCARD_READONLY // Read-only SD card (to save over 2K of flash) //#define GCODE_REPEAT_MARKERS // Enable G-code M808 to set repeat markers and do looping @@ -1361,16 +1363,16 @@ * - SDSORT_CACHE_NAMES will retain the sorted file listing in RAM. (Expensive!) * - SDSORT_DYNAMIC_RAM only uses RAM when the SD menu is visible. (Use with caution!) */ - //#define SDCARD_SORT_ALPHA + #define SDCARD_SORT_ALPHA // SD Card Sorting options #if ENABLED(SDCARD_SORT_ALPHA) #define SDSORT_LIMIT 40 // Maximum number of sorted items (10-256). Costs 27 bytes each. #define FOLDER_SORTING -1 // -1=above 0=none 1=below #define SDSORT_GCODE false // Allow turning sorting on/off with LCD and M34 G-code. - #define SDSORT_USES_RAM false // Pre-allocate a static array for faster pre-sorting. + #define SDSORT_USES_RAM true // Pre-allocate a static array for faster pre-sorting. #define SDSORT_USES_STACK false // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.) - #define SDSORT_CACHE_NAMES false // Keep sorted items in RAM longer for speedy performance. Most expensive option. + #define SDSORT_CACHE_NAMES true // Keep sorted items in RAM longer for speedy performance. Most expensive option. #define SDSORT_DYNAMIC_RAM false // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use! #define SDSORT_CACHE_VFATS 2 // Maximum number of 13-byte VFAT entries to use for sorting. // Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM. @@ -1381,10 +1383,10 @@ //#define UTF_FILENAME_SUPPORT // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT + #define LONG_FILENAME_HOST_SUPPORT // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES + #define SCROLL_LONG_FILENAMES // Leave the heaters on after Stop Print (not recommended!) //#define SD_ABORT_NO_COOLDOWN @@ -1476,7 +1478,7 @@ * * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] */ - //#define SDCARD_CONNECTION LCD + #define SDCARD_CONNECTION ONBOARD // Enable if SD detect is rendered useless (e.g., by using an SD extender) //#define NO_SD_DETECT @@ -1790,7 +1792,7 @@ * * Warning: Does not respect endstops! */ -//#define BABYSTEPPING +#define BABYSTEPPING #if ENABLED(BABYSTEPPING) //#define INTEGRATED_BABYSTEPPING // EXPERIMENTAL integration of babystepping into the Stepper ISR //#define BABYSTEP_WITHOUT_HOMING @@ -1801,7 +1803,7 @@ #define BABYSTEP_MULTIPLICATOR_Z 1 // (steps or mm) Steps or millimeter distance for each Z babystep #define BABYSTEP_MULTIPLICATOR_XY 1 // (steps or mm) Steps or millimeter distance for each XY babystep - //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. + #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. // Note: Extra time may be added to mitigate controller latency. @@ -1837,12 +1839,12 @@ * * See https://marlinfw.org/docs/features/lin_advance.html for full instructions. */ -//#define LIN_ADVANCE +#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) //#define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants - #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed + #define LIN_ADVANCE_K 0.0 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // If enabled, this will generate debug information output over USB. - //#define EXPERIMENTAL_SCURVE // Enable this option to permit S-Curve Acceleration + #define EXPERIMENTAL_SCURVE // Enable this option to permit S-Curve Acceleration #endif // @section leveling @@ -1982,7 +1984,7 @@ // // G2/G3 Arc Support // -#define ARC_SUPPORT // Disable this feature to save ~3226 bytes +//#define ARC_SUPPORT // Disable this feature to save ~3226 bytes #if ENABLED(ARC_SUPPORT) #define MM_PER_ARC_SEGMENT 1 // (mm) Length (or minimum length) of each arc segment //#define ARC_SEGMENTS_PER_R 1 // Max segment length, MM_PER = Min @@ -2141,7 +2143,7 @@ * Currently handles M108, M112, M410, M876 * NOTE: Not yet implemented for all platforms. */ -//#define EMERGENCY_PARSER +#define EMERGENCY_PARSER /** * Realtime Reporting (requires EMERGENCY_PARSER) @@ -2311,14 +2313,14 @@ * * Enable PARK_HEAD_ON_PAUSE to add the G-code M125 Pause and Park. */ -//#define ADVANCED_PAUSE_FEATURE +#define ADVANCED_PAUSE_FEATURE #if ENABLED(ADVANCED_PAUSE_FEATURE) #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. // This short retract is done immediately, before parking the nozzle. #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast. #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload. + #define FILAMENT_CHANGE_UNLOAD_LENGTH 400 // (mm) The length of filament for a complete unload. // For Bowden, the full length of the tube and nozzle. // For direct drive, the full length of the nozzle. // Set to 0 for manual unloading. @@ -2327,7 +2329,7 @@ // 0 to disable start loading and skip to fast load only #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast. #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle. + #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 350 // (mm) Load length of filament, from extruder gear to nozzle. // For Bowden, the full length of the tube and nozzle. // For direct drive, the full length of the nozzle. //#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted. @@ -2352,7 +2354,7 @@ //#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. //#define HOME_BEFORE_FILAMENT_CHANGE // If needed, home before parking for filament change - //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. + #define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) #endif @@ -2493,7 +2495,7 @@ #define INTERPOLATE true #if AXIS_IS_TMC(X) - #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. + #define X_CURRENT 580 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for sensorless homing #define X_MICROSTEPS 16 // 0..256 #define X_RSENSE 0.11 @@ -2511,7 +2513,7 @@ #endif #if AXIS_IS_TMC(Y) - #define Y_CURRENT 800 + #define Y_CURRENT 580 #define Y_CURRENT_HOME Y_CURRENT #define Y_MICROSTEPS 16 #define Y_RSENSE 0.11 @@ -2529,7 +2531,7 @@ #endif #if AXIS_IS_TMC(Z) - #define Z_CURRENT 800 + #define Z_CURRENT 580 #define Z_CURRENT_HOME Z_CURRENT #define Z_MICROSTEPS 16 #define Z_RSENSE 0.11 @@ -2565,7 +2567,7 @@ #endif #if AXIS_IS_TMC(E0) - #define E0_CURRENT 800 + #define E0_CURRENT 650 #define E0_MICROSTEPS 16 #define E0_RSENSE 0.11 #define E0_CHAIN_POS -1 @@ -2670,15 +2672,15 @@ * Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers * on the same serial port, either here or in your board's pins file. */ - //#define X_SLAVE_ADDRESS 0 - //#define Y_SLAVE_ADDRESS 0 - //#define Z_SLAVE_ADDRESS 0 + #define X_SLAVE_ADDRESS 0 + #define Y_SLAVE_ADDRESS 2 + #define Z_SLAVE_ADDRESS 1 //#define X2_SLAVE_ADDRESS 0 //#define Y2_SLAVE_ADDRESS 0 //#define Z2_SLAVE_ADDRESS 0 //#define Z3_SLAVE_ADDRESS 0 //#define Z4_SLAVE_ADDRESS 0 - //#define E0_SLAVE_ADDRESS 0 + #define E0_SLAVE_ADDRESS 3 //#define E1_SLAVE_ADDRESS 0 //#define E2_SLAVE_ADDRESS 0 //#define E3_SLAVE_ADDRESS 0 @@ -2719,7 +2721,7 @@ * Define your own with: * { , , hysteresis_start[1..8] } */ - #define CHOPPER_TIMING CHOPPER_DEFAULT_12V // All axes (override below) + #define CHOPPER_TIMING CHOPPER_DEFAULT_24V // All axes (override below) //#define CHOPPER_TIMING_X CHOPPER_TIMING // For X Axes (override below) //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X //#define CHOPPER_TIMING_Y CHOPPER_TIMING // For Y Axes (override below) @@ -2839,7 +2841,7 @@ * Beta feature! * Create a 50/50 square wave step pulse optimal for stepper drivers. */ - //#define SQUARE_WAVE_STEPPING + #define SQUARE_WAVE_STEPPING /** * Enable M122 debugging command for TMC stepper drivers. diff --git a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.2/Configuration.h b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.2/Configuration.h index 78c2dc9160..bae4be6f77 100644 --- a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.2/Configuration.h +++ b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.2/Configuration.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.2" + /** * Configuration.h * @@ -69,7 +71,7 @@ // @section info // Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes. +#define STRING_CONFIG_H_AUTHOR "(thisiskeithb, Ender-3 Pro)" // Who made the changes. //#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) /** @@ -102,14 +104,14 @@ * * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] */ -#define SERIAL_PORT 0 +#define SERIAL_PORT 2 /** * Select a secondary serial port on the board to use for communication with the host. * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] */ -//#define SERIAL_PORT_2 -1 +#define SERIAL_PORT_2 -1 /** * Select a third serial port on the board to use for communication with the host. @@ -127,18 +129,18 @@ * * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ -#define BAUDRATE 250000 +#define BAUDRATE 115200 // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH // Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_RAMPS_14_EFB + #define MOTHERBOARD BOARD_BTT_SKR_MINI_E3_V1_2 #endif // Name displayed in the LCD "Ready" message and Info menu -//#define CUSTOM_MACHINE_NAME "3D Printer" +#define CUSTOM_MACHINE_NAME "Ender-3 Pro" // Printer's unique ID, used by some programs to differentiate between machines. // Choose your own or use a service like https://www.uuidgenerator.net/version4 @@ -424,7 +426,7 @@ #define TEMP_SENSOR_5 0 #define TEMP_SENSOR_6 0 #define TEMP_SENSOR_7 0 -#define TEMP_SENSOR_BED 0 +#define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 #define TEMP_SENSOR_COOLER 0 @@ -480,7 +482,7 @@ #define HEATER_5_MAXTEMP 275 #define HEATER_6_MAXTEMP 275 #define HEATER_7_MAXTEMP 275 -#define BED_MAXTEMP 150 +#define BED_MAXTEMP 125 #define CHAMBER_MAXTEMP 60 /** @@ -510,16 +512,17 @@ //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) // Set/get with gcode: M301 E[extruder number, 0-2] + // Creality Ender-3 Pro #if ENABLED(PID_PARAMS_PER_HOTEND) // Specify between 1 and HOTENDS values per array. // If fewer than EXTRUDER values are provided, the last element will be repeated. - #define DEFAULT_Kp_LIST { 22.20, 22.20 } - #define DEFAULT_Ki_LIST { 1.08, 1.08 } - #define DEFAULT_Kd_LIST { 114.00, 114.00 } + #define DEFAULT_Kp_LIST { 21.73, 21.73 } + #define DEFAULT_Ki_LIST { 1.54, 1.54 } + #define DEFAULT_Kd_LIST { 76.55, 76.55 } #else - #define DEFAULT_Kp 22.20 - #define DEFAULT_Ki 1.08 - #define DEFAULT_Kd 114.00 + #define DEFAULT_Kp 21.73 + #define DEFAULT_Ki 1.54 + #define DEFAULT_Kd 76.55 #endif #endif // PIDTEMP @@ -556,11 +559,10 @@ //#define MIN_BED_POWER 0 //#define PID_BED_DEBUG // Sends debug data to the serial port. - // 120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - // from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) - #define DEFAULT_bedKp 10.00 - #define DEFAULT_bedKi .023 - #define DEFAULT_bedKd 305.4 + // Creality Ender-3 Pro + #define DEFAULT_bedKp 50.71 + #define DEFAULT_bedKi 9.88 + #define DEFAULT_bedKd 173.43 // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. #endif // PIDTEMPBED @@ -634,7 +636,7 @@ * Note: For Bowden Extruders make this large enough to allow load/unload. */ #define PREVENT_LENGTHY_EXTRUDE -#define EXTRUDE_MAXLENGTH 200 +#define EXTRUDE_MAXLENGTH 600 //=========================================================================== //======================== Thermal Runaway Protection ======================= @@ -743,15 +745,15 @@ * TMC5130, TMC5130_STANDALONE, TMC5160, TMC5160_STANDALONE * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'L6474', 'POWERSTEP01', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2160', 'TMC2160_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC2209', 'TMC2209_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE', 'TMC5160', 'TMC5160_STANDALONE'] */ -#define X_DRIVER_TYPE A4988 -#define Y_DRIVER_TYPE A4988 -#define Z_DRIVER_TYPE A4988 +#define X_DRIVER_TYPE TMC2209 +#define Y_DRIVER_TYPE TMC2209 +#define Z_DRIVER_TYPE TMC2209 //#define X2_DRIVER_TYPE A4988 //#define Y2_DRIVER_TYPE A4988 //#define Z2_DRIVER_TYPE A4988 //#define Z3_DRIVER_TYPE A4988 //#define Z4_DRIVER_TYPE A4988 -#define E0_DRIVER_TYPE A4988 +#define E0_DRIVER_TYPE TMC2209 //#define E1_DRIVER_TYPE A4988 //#define E2_DRIVER_TYPE A4988 //#define E3_DRIVER_TYPE A4988 @@ -806,14 +808,14 @@ * Override with M92 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 500 } +#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 93 } /** * Default Max Feed Rate (mm/s) * Override with M203 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 } +#define DEFAULT_MAX_FEEDRATE { 500, 500, 5, 25 } //#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 #if ENABLED(LIMITED_MAX_FR_EDITING) @@ -826,7 +828,7 @@ * Override with M201 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 } +#define DEFAULT_MAX_ACCELERATION { 500, 500, 100, 5000 } //#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 #if ENABLED(LIMITED_MAX_ACCEL_EDITING) @@ -841,9 +843,9 @@ * M204 R Retract Acceleration * M204 T Travel Acceleration */ -#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves +#define DEFAULT_ACCELERATION 500 // X, Y, Z and E acceleration for printing moves +#define DEFAULT_RETRACT_ACCELERATION 500 // E acceleration for retracts +#define DEFAULT_TRAVEL_ACCELERATION 500 // X, Y, Z acceleration for travel (non printing) moves /** * Default Jerk limits (mm/s) @@ -877,7 +879,7 @@ * https://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html */ #if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.013 // (mm) Distance from real junction edge + #define JUNCTION_DEVIATION_MM 0.08 // (mm) Distance from real junction edge #define JD_HANDLE_SMALL_SEGMENTS // Use curvature estimation instead of just the junction angle // for small segments (< 1mm) with large junction angles (> 135°). #endif @@ -890,7 +892,7 @@ * * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained */ -//#define S_CURVE_ACCELERATION +#define S_CURVE_ACCELERATION //=========================================================================== //============================= Z Probe Options ============================= @@ -1185,19 +1187,19 @@ // @section extruder #define DISABLE_E false // Disable the extruder when not stepping -#define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled +//#define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled // @section machine // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR false +#define INVERT_X_DIR true #define INVERT_Y_DIR true #define INVERT_Z_DIR false // @section extruder // For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR false +#define INVERT_E0_DIR true #define INVERT_E1_DIR false #define INVERT_E2_DIR false #define INVERT_E3_DIR false @@ -1232,8 +1234,8 @@ // @section machine // The size of the printable area -#define X_BED_SIZE 200 -#define Y_BED_SIZE 200 +#define X_BED_SIZE 235 +#define Y_BED_SIZE 235 // Travel limits (mm) after homing, corresponding to endstop positions. #define X_MIN_POS 0 @@ -1241,7 +1243,7 @@ #define Z_MIN_POS 0 #define X_MAX_POS X_BED_SIZE #define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 200 +#define Z_MAX_POS 250 /** * Software Endstops @@ -1389,7 +1391,7 @@ //#define AUTO_BED_LEVELING_LINEAR //#define AUTO_BED_LEVELING_BILINEAR //#define AUTO_BED_LEVELING_UBL -//#define MESH_BED_LEVELING +#define MESH_BED_LEVELING /** * Normally G28 leaves leveling disabled on completion. Enable one of @@ -1454,7 +1456,7 @@ #if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR) // Set the number of grid points per dimension. - #define GRID_MAX_POINTS_X 3 + #define GRID_MAX_POINTS_X 5 #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X // Probe along the Y axis, advancing X after each column @@ -1464,7 +1466,7 @@ // Beyond the probed grid, continue the implied tilt? // Default is to maintain the height of the nearest edge. - //#define EXTRAPOLATE_BEYOND_GRID + #define EXTRAPOLATE_BEYOND_GRID // // Experimental Subdivision of the grid by Catmull-Rom method. @@ -1518,16 +1520,16 @@ * Add a bed leveling sub-menu for ABL or MBL. * Include a guided procedure if manual probing is enabled. */ -//#define LCD_BED_LEVELING +#define LCD_BED_LEVELING #if ENABLED(LCD_BED_LEVELING) #define MESH_EDIT_Z_STEP 0.025 // (mm) Step size while manually probing Z axis. #define LCD_PROBE_Z_RANGE 4 // (mm) Z Range centered on Z_MIN_POS for LCD Z adjustment - //#define MESH_EDIT_MENU // Add a menu to edit mesh points + #define MESH_EDIT_MENU // Add a menu to edit mesh points #endif // Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS +#define LEVEL_BED_CORNERS #if ENABLED(LEVEL_BED_CORNERS) #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets @@ -1595,7 +1597,7 @@ #endif // Homing speeds (mm/min) -#define HOMING_FEEDRATE_MM_M { (50*60), (50*60), (4*60) } +#define HOMING_FEEDRATE_MM_M { (20*60), (20*60), (4*60) } // Validate that endstops are triggered on homing moves #define VALIDATE_HOMING_ENDSTOPS @@ -1672,12 +1674,12 @@ * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) */ -//#define EEPROM_SETTINGS // Persistent storage with M500 and M501 +#define EEPROM_SETTINGS // Persistent storage with M500 and M501 //#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. #define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load #if ENABLED(EEPROM_SETTINGS) - //#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. + #define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. #endif // @@ -1706,16 +1708,16 @@ // Preheat Constants - Up to 5 are supported without changes // #define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 180 -#define PREHEAT_1_TEMP_BED 70 +#define PREHEAT_1_TEMP_HOTEND 185 +#define PREHEAT_1_TEMP_BED 45 #define PREHEAT_1_TEMP_CHAMBER 35 -#define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 +#define PREHEAT_1_FAN_SPEED 255 // Value from 0 to 255 #define PREHEAT_2_LABEL "ABS" #define PREHEAT_2_TEMP_HOTEND 240 #define PREHEAT_2_TEMP_BED 110 #define PREHEAT_2_TEMP_CHAMBER 35 -#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 +#define PREHEAT_2_FAN_SPEED 255 // Value from 0 to 255 /** * Nozzle Park @@ -1728,7 +1730,7 @@ * P1 Raise the nozzle always to Z-park height. * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. */ -//#define NOZZLE_PARK_FEATURE +#define NOZZLE_PARK_FEATURE #if ENABLED(NOZZLE_PARK_FEATURE) // Specify a park position as { X, Y, Z_raise } @@ -1921,7 +1923,7 @@ * * :['JAPANESE', 'WESTERN', 'CYRILLIC'] */ -#define DISPLAY_CHARSET_HD44780 JAPANESE +#define DISPLAY_CHARSET_HD44780 WESTERN /** * Info Screen Style (0:Classic, 1:Průša) @@ -1936,7 +1938,7 @@ * SD Card support is disabled by default. If your controller has an SD slot, * you must uncomment the following option or it won't work. */ -//#define SDSUPPORT +#define SDSUPPORT /** * SD CARD: ENABLE CRC @@ -2006,7 +2008,7 @@ // // Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. // -//#define INDIVIDUAL_AXIS_HOMING_MENU +#define INDIVIDUAL_AXIS_HOMING_MENU // // SPEAKER/BUZZER @@ -2287,7 +2289,7 @@ // This is RAMPS-compatible using a single 10-pin connector. // (For CR-10 owners who want to replace the Melzi Creality board but retain the display) // -//#define CR10_STOCKDISPLAY +#define CR10_STOCKDISPLAY // // Ender-2 OEM display, a variant of the MKS_MINI_12864 diff --git a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h index 5335fa012a..83fa0061a1 100644 --- a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.2" + /** * Configuration_adv.h * @@ -741,7 +743,7 @@ //#define HOMING_BACKOFF_POST_MM { 2, 2, 2 } // (mm) Backoff from endstops after homing -//#define QUICK_HOME // If G28 contains XY do a diagonal move first +#define QUICK_HOME // If G28 contains XY do a diagonal move first //#define HOME_Y_BEFORE_X // If G28 contains XY home Y before X //#define HOME_Z_FIRST // Home Z first. Requires a Z-MIN endstop (not a probe). //#define CODEPENDENT_XY_HOMING // If X/Y can't home without homing Y/X first @@ -867,7 +869,7 @@ // On a 300mm bed a 5% grade would give a misalignment of ~1.5cm #define G34_MAX_GRADE 5 // (%) Maximum incline that G34 will handle - #define Z_STEPPER_ALIGN_ITERATIONS 5 // Number of iterations to apply during alignment + #define Z_STEPPER_ALIGN_ITERATIONS 3 // Number of iterations to apply during alignment #define Z_STEPPER_ALIGN_ACC 0.02 // Stop iterating early if the accuracy is better than this #define RESTORE_LEVELING_AFTER_G34 // Restore leveling after G34 is done? // After G34, re-home Z (G28 Z) or just calculate it from the last probe heights? @@ -1175,7 +1177,7 @@ #endif // Include a page of printer information in the LCD Main Menu - //#define LCD_INFO_MENU + #define LCD_INFO_MENU #if ENABLED(LCD_INFO_MENU) //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages #endif @@ -1229,13 +1231,13 @@ #endif // Scroll a longer status message into view - //#define STATUS_MESSAGE_SCROLLING + #define STATUS_MESSAGE_SCROLLING // On the Info Screen, display XY with one decimal place when possible //#define LCD_DECIMAL_SMALL_XY // Add an 'M73' G-code to set the current percentage - //#define LCD_SET_PROGRESS_MANUALLY + #define LCD_SET_PROGRESS_MANUALLY // Show the E position (filament used) during printing //#define LCD_SHOW_E_TOTAL @@ -1281,7 +1283,7 @@ //#define SD_DETECT_STATE HIGH //#define SD_IGNORE_AT_STARTUP // Don't mount the SD card when starting up - //#define SDCARD_READONLY // Read-only SD card (to save over 2K of flash) + #define SDCARD_READONLY // Read-only SD card (to save over 2K of flash) //#define GCODE_REPEAT_MARKERS // Enable G-code M808 to set repeat markers and do looping @@ -1361,16 +1363,16 @@ * - SDSORT_CACHE_NAMES will retain the sorted file listing in RAM. (Expensive!) * - SDSORT_DYNAMIC_RAM only uses RAM when the SD menu is visible. (Use with caution!) */ - //#define SDCARD_SORT_ALPHA + #define SDCARD_SORT_ALPHA // SD Card Sorting options #if ENABLED(SDCARD_SORT_ALPHA) #define SDSORT_LIMIT 40 // Maximum number of sorted items (10-256). Costs 27 bytes each. #define FOLDER_SORTING -1 // -1=above 0=none 1=below #define SDSORT_GCODE false // Allow turning sorting on/off with LCD and M34 G-code. - #define SDSORT_USES_RAM false // Pre-allocate a static array for faster pre-sorting. + #define SDSORT_USES_RAM true // Pre-allocate a static array for faster pre-sorting. #define SDSORT_USES_STACK false // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.) - #define SDSORT_CACHE_NAMES false // Keep sorted items in RAM longer for speedy performance. Most expensive option. + #define SDSORT_CACHE_NAMES true // Keep sorted items in RAM longer for speedy performance. Most expensive option. #define SDSORT_DYNAMIC_RAM false // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use! #define SDSORT_CACHE_VFATS 2 // Maximum number of 13-byte VFAT entries to use for sorting. // Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM. @@ -1381,10 +1383,10 @@ //#define UTF_FILENAME_SUPPORT // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT + #define LONG_FILENAME_HOST_SUPPORT // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES + #define SCROLL_LONG_FILENAMES // Leave the heaters on after Stop Print (not recommended!) //#define SD_ABORT_NO_COOLDOWN @@ -1476,7 +1478,7 @@ * * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] */ - //#define SDCARD_CONNECTION LCD + #define SDCARD_CONNECTION ONBOARD // Enable if SD detect is rendered useless (e.g., by using an SD extender) //#define NO_SD_DETECT @@ -1790,7 +1792,7 @@ * * Warning: Does not respect endstops! */ -//#define BABYSTEPPING +#define BABYSTEPPING #if ENABLED(BABYSTEPPING) //#define INTEGRATED_BABYSTEPPING // EXPERIMENTAL integration of babystepping into the Stepper ISR //#define BABYSTEP_WITHOUT_HOMING @@ -1801,7 +1803,7 @@ #define BABYSTEP_MULTIPLICATOR_Z 1 // (steps or mm) Steps or millimeter distance for each Z babystep #define BABYSTEP_MULTIPLICATOR_XY 1 // (steps or mm) Steps or millimeter distance for each XY babystep - //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. + #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. // Note: Extra time may be added to mitigate controller latency. @@ -1837,12 +1839,12 @@ * * See https://marlinfw.org/docs/features/lin_advance.html for full instructions. */ -//#define LIN_ADVANCE +#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) //#define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants - #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed + #define LIN_ADVANCE_K 0.0 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // If enabled, this will generate debug information output over USB. - //#define EXPERIMENTAL_SCURVE // Enable this option to permit S-Curve Acceleration + #define EXPERIMENTAL_SCURVE // Enable this option to permit S-Curve Acceleration #endif // @section leveling @@ -1982,7 +1984,7 @@ // // G2/G3 Arc Support // -#define ARC_SUPPORT // Disable this feature to save ~3226 bytes +//#define ARC_SUPPORT // Disable this feature to save ~3226 bytes #if ENABLED(ARC_SUPPORT) #define MM_PER_ARC_SEGMENT 1 // (mm) Length (or minimum length) of each arc segment //#define ARC_SEGMENTS_PER_R 1 // Max segment length, MM_PER = Min @@ -2141,7 +2143,7 @@ * Currently handles M108, M112, M410, M876 * NOTE: Not yet implemented for all platforms. */ -//#define EMERGENCY_PARSER +#define EMERGENCY_PARSER /** * Realtime Reporting (requires EMERGENCY_PARSER) @@ -2311,14 +2313,14 @@ * * Enable PARK_HEAD_ON_PAUSE to add the G-code M125 Pause and Park. */ -//#define ADVANCED_PAUSE_FEATURE +#define ADVANCED_PAUSE_FEATURE #if ENABLED(ADVANCED_PAUSE_FEATURE) #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. // This short retract is done immediately, before parking the nozzle. #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast. #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload. + #define FILAMENT_CHANGE_UNLOAD_LENGTH 400 // (mm) The length of filament for a complete unload. // For Bowden, the full length of the tube and nozzle. // For direct drive, the full length of the nozzle. // Set to 0 for manual unloading. @@ -2327,7 +2329,7 @@ // 0 to disable start loading and skip to fast load only #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast. #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle. + #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 350 // (mm) Load length of filament, from extruder gear to nozzle. // For Bowden, the full length of the tube and nozzle. // For direct drive, the full length of the nozzle. //#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted. @@ -2352,7 +2354,7 @@ //#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. //#define HOME_BEFORE_FILAMENT_CHANGE // If needed, home before parking for filament change - //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. + #define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) #endif @@ -2493,7 +2495,7 @@ #define INTERPOLATE true #if AXIS_IS_TMC(X) - #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. + #define X_CURRENT 580 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for sensorless homing #define X_MICROSTEPS 16 // 0..256 #define X_RSENSE 0.11 @@ -2511,7 +2513,7 @@ #endif #if AXIS_IS_TMC(Y) - #define Y_CURRENT 800 + #define Y_CURRENT 580 #define Y_CURRENT_HOME Y_CURRENT #define Y_MICROSTEPS 16 #define Y_RSENSE 0.11 @@ -2529,7 +2531,7 @@ #endif #if AXIS_IS_TMC(Z) - #define Z_CURRENT 800 + #define Z_CURRENT 580 #define Z_CURRENT_HOME Z_CURRENT #define Z_MICROSTEPS 16 #define Z_RSENSE 0.11 @@ -2565,7 +2567,7 @@ #endif #if AXIS_IS_TMC(E0) - #define E0_CURRENT 800 + #define E0_CURRENT 650 #define E0_MICROSTEPS 16 #define E0_RSENSE 0.11 #define E0_CHAIN_POS -1 @@ -2719,7 +2721,7 @@ * Define your own with: * { , , hysteresis_start[1..8] } */ - #define CHOPPER_TIMING CHOPPER_DEFAULT_12V // All axes (override below) + #define CHOPPER_TIMING CHOPPER_DEFAULT_24V // All axes (override below) //#define CHOPPER_TIMING_X CHOPPER_TIMING // For X Axes (override below) //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X //#define CHOPPER_TIMING_Y CHOPPER_TIMING // For Y Axes (override below) @@ -2839,7 +2841,7 @@ * Beta feature! * Create a 50/50 square wave step pulse optimal for stepper drivers. */ - //#define SQUARE_WAVE_STEPPING + #define SQUARE_WAVE_STEPPING /** * Enable M122 debugging command for TMC stepper drivers. diff --git a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 2.0/Configuration.h b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 2.0/Configuration.h index 78c2dc9160..c0ba275907 100644 --- a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 2.0/Configuration.h +++ b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 2.0/Configuration.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 2.0" + /** * Configuration.h * @@ -69,7 +71,7 @@ // @section info // Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes. +#define STRING_CONFIG_H_AUTHOR "(thisiskeithb, Ender-3 Pro)" // Who made the changes. //#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) /** @@ -102,14 +104,14 @@ * * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] */ -#define SERIAL_PORT 0 +#define SERIAL_PORT 2 /** * Select a secondary serial port on the board to use for communication with the host. * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] */ -//#define SERIAL_PORT_2 -1 +#define SERIAL_PORT_2 -1 /** * Select a third serial port on the board to use for communication with the host. @@ -127,18 +129,18 @@ * * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ -#define BAUDRATE 250000 +#define BAUDRATE 115200 // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH // Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_RAMPS_14_EFB + #define MOTHERBOARD BOARD_BTT_SKR_MINI_E3_V2_0 #endif // Name displayed in the LCD "Ready" message and Info menu -//#define CUSTOM_MACHINE_NAME "3D Printer" +#define CUSTOM_MACHINE_NAME "Ender-3 Pro" // Printer's unique ID, used by some programs to differentiate between machines. // Choose your own or use a service like https://www.uuidgenerator.net/version4 @@ -424,7 +426,7 @@ #define TEMP_SENSOR_5 0 #define TEMP_SENSOR_6 0 #define TEMP_SENSOR_7 0 -#define TEMP_SENSOR_BED 0 +#define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 #define TEMP_SENSOR_COOLER 0 @@ -480,7 +482,7 @@ #define HEATER_5_MAXTEMP 275 #define HEATER_6_MAXTEMP 275 #define HEATER_7_MAXTEMP 275 -#define BED_MAXTEMP 150 +#define BED_MAXTEMP 125 #define CHAMBER_MAXTEMP 60 /** @@ -510,16 +512,17 @@ //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) // Set/get with gcode: M301 E[extruder number, 0-2] + // Creality Ender-3 Pro #if ENABLED(PID_PARAMS_PER_HOTEND) // Specify between 1 and HOTENDS values per array. // If fewer than EXTRUDER values are provided, the last element will be repeated. - #define DEFAULT_Kp_LIST { 22.20, 22.20 } - #define DEFAULT_Ki_LIST { 1.08, 1.08 } - #define DEFAULT_Kd_LIST { 114.00, 114.00 } + #define DEFAULT_Kp_LIST { 21.73, 21.73 } + #define DEFAULT_Ki_LIST { 1.54, 1.54 } + #define DEFAULT_Kd_LIST { 76.55, 76.55 } #else - #define DEFAULT_Kp 22.20 - #define DEFAULT_Ki 1.08 - #define DEFAULT_Kd 114.00 + #define DEFAULT_Kp 21.73 + #define DEFAULT_Ki 1.54 + #define DEFAULT_Kd 76.55 #endif #endif // PIDTEMP @@ -556,11 +559,10 @@ //#define MIN_BED_POWER 0 //#define PID_BED_DEBUG // Sends debug data to the serial port. - // 120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - // from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) - #define DEFAULT_bedKp 10.00 - #define DEFAULT_bedKi .023 - #define DEFAULT_bedKd 305.4 + // Creality Ender-3 Pro + #define DEFAULT_bedKp 50.71 + #define DEFAULT_bedKi 9.88 + #define DEFAULT_bedKd 173.43 // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. #endif // PIDTEMPBED @@ -634,7 +636,7 @@ * Note: For Bowden Extruders make this large enough to allow load/unload. */ #define PREVENT_LENGTHY_EXTRUDE -#define EXTRUDE_MAXLENGTH 200 +#define EXTRUDE_MAXLENGTH 600 //=========================================================================== //======================== Thermal Runaway Protection ======================= @@ -743,15 +745,15 @@ * TMC5130, TMC5130_STANDALONE, TMC5160, TMC5160_STANDALONE * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'L6474', 'POWERSTEP01', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2160', 'TMC2160_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC2209', 'TMC2209_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE', 'TMC5160', 'TMC5160_STANDALONE'] */ -#define X_DRIVER_TYPE A4988 -#define Y_DRIVER_TYPE A4988 -#define Z_DRIVER_TYPE A4988 +#define X_DRIVER_TYPE TMC2209 +#define Y_DRIVER_TYPE TMC2209 +#define Z_DRIVER_TYPE TMC2209 //#define X2_DRIVER_TYPE A4988 //#define Y2_DRIVER_TYPE A4988 //#define Z2_DRIVER_TYPE A4988 //#define Z3_DRIVER_TYPE A4988 //#define Z4_DRIVER_TYPE A4988 -#define E0_DRIVER_TYPE A4988 +#define E0_DRIVER_TYPE TMC2209 //#define E1_DRIVER_TYPE A4988 //#define E2_DRIVER_TYPE A4988 //#define E3_DRIVER_TYPE A4988 @@ -806,14 +808,14 @@ * Override with M92 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 500 } +#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 93 } /** * Default Max Feed Rate (mm/s) * Override with M203 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 } +#define DEFAULT_MAX_FEEDRATE { 500, 500, 5, 25 } //#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 #if ENABLED(LIMITED_MAX_FR_EDITING) @@ -826,7 +828,7 @@ * Override with M201 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 } +#define DEFAULT_MAX_ACCELERATION { 500, 500, 100, 5000 } //#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 #if ENABLED(LIMITED_MAX_ACCEL_EDITING) @@ -841,9 +843,9 @@ * M204 R Retract Acceleration * M204 T Travel Acceleration */ -#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves +#define DEFAULT_ACCELERATION 500 // X, Y, Z and E acceleration for printing moves +#define DEFAULT_RETRACT_ACCELERATION 500 // E acceleration for retracts +#define DEFAULT_TRAVEL_ACCELERATION 500 // X, Y, Z acceleration for travel (non printing) moves /** * Default Jerk limits (mm/s) @@ -877,7 +879,7 @@ * https://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html */ #if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.013 // (mm) Distance from real junction edge + #define JUNCTION_DEVIATION_MM 0.08 // (mm) Distance from real junction edge #define JD_HANDLE_SMALL_SEGMENTS // Use curvature estimation instead of just the junction angle // for small segments (< 1mm) with large junction angles (> 135°). #endif @@ -890,7 +892,7 @@ * * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained */ -//#define S_CURVE_ACCELERATION +#define S_CURVE_ACCELERATION //=========================================================================== //============================= Z Probe Options ============================= @@ -1190,14 +1192,14 @@ // @section machine // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR false +#define INVERT_X_DIR true #define INVERT_Y_DIR true #define INVERT_Z_DIR false // @section extruder // For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR false +#define INVERT_E0_DIR true #define INVERT_E1_DIR false #define INVERT_E2_DIR false #define INVERT_E3_DIR false @@ -1232,8 +1234,8 @@ // @section machine // The size of the printable area -#define X_BED_SIZE 200 -#define Y_BED_SIZE 200 +#define X_BED_SIZE 235 +#define Y_BED_SIZE 235 // Travel limits (mm) after homing, corresponding to endstop positions. #define X_MIN_POS 0 @@ -1241,7 +1243,7 @@ #define Z_MIN_POS 0 #define X_MAX_POS X_BED_SIZE #define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 200 +#define Z_MAX_POS 250 /** * Software Endstops @@ -1389,7 +1391,7 @@ //#define AUTO_BED_LEVELING_LINEAR //#define AUTO_BED_LEVELING_BILINEAR //#define AUTO_BED_LEVELING_UBL -//#define MESH_BED_LEVELING +#define MESH_BED_LEVELING /** * Normally G28 leaves leveling disabled on completion. Enable one of @@ -1454,7 +1456,7 @@ #if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR) // Set the number of grid points per dimension. - #define GRID_MAX_POINTS_X 3 + #define GRID_MAX_POINTS_X 5 #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X // Probe along the Y axis, advancing X after each column @@ -1464,7 +1466,7 @@ // Beyond the probed grid, continue the implied tilt? // Default is to maintain the height of the nearest edge. - //#define EXTRAPOLATE_BEYOND_GRID + #define EXTRAPOLATE_BEYOND_GRID // // Experimental Subdivision of the grid by Catmull-Rom method. @@ -1518,16 +1520,16 @@ * Add a bed leveling sub-menu for ABL or MBL. * Include a guided procedure if manual probing is enabled. */ -//#define LCD_BED_LEVELING +#define LCD_BED_LEVELING #if ENABLED(LCD_BED_LEVELING) #define MESH_EDIT_Z_STEP 0.025 // (mm) Step size while manually probing Z axis. #define LCD_PROBE_Z_RANGE 4 // (mm) Z Range centered on Z_MIN_POS for LCD Z adjustment - //#define MESH_EDIT_MENU // Add a menu to edit mesh points + #define MESH_EDIT_MENU // Add a menu to edit mesh points #endif // Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS +#define LEVEL_BED_CORNERS #if ENABLED(LEVEL_BED_CORNERS) #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets @@ -1595,7 +1597,7 @@ #endif // Homing speeds (mm/min) -#define HOMING_FEEDRATE_MM_M { (50*60), (50*60), (4*60) } +#define HOMING_FEEDRATE_MM_M { (20*60), (20*60), (4*60) } // Validate that endstops are triggered on homing moves #define VALIDATE_HOMING_ENDSTOPS @@ -1672,12 +1674,12 @@ * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) */ -//#define EEPROM_SETTINGS // Persistent storage with M500 and M501 +#define EEPROM_SETTINGS // Persistent storage with M500 and M501 //#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. #define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load #if ENABLED(EEPROM_SETTINGS) - //#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. + #define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. #endif // @@ -1706,16 +1708,16 @@ // Preheat Constants - Up to 5 are supported without changes // #define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 180 -#define PREHEAT_1_TEMP_BED 70 +#define PREHEAT_1_TEMP_HOTEND 185 +#define PREHEAT_1_TEMP_BED 45 #define PREHEAT_1_TEMP_CHAMBER 35 -#define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 +#define PREHEAT_1_FAN_SPEED 255 // Value from 0 to 255 #define PREHEAT_2_LABEL "ABS" #define PREHEAT_2_TEMP_HOTEND 240 #define PREHEAT_2_TEMP_BED 110 #define PREHEAT_2_TEMP_CHAMBER 35 -#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 +#define PREHEAT_2_FAN_SPEED 255 // Value from 0 to 255 /** * Nozzle Park @@ -1728,7 +1730,7 @@ * P1 Raise the nozzle always to Z-park height. * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. */ -//#define NOZZLE_PARK_FEATURE +#define NOZZLE_PARK_FEATURE #if ENABLED(NOZZLE_PARK_FEATURE) // Specify a park position as { X, Y, Z_raise } @@ -1936,7 +1938,7 @@ * SD Card support is disabled by default. If your controller has an SD slot, * you must uncomment the following option or it won't work. */ -//#define SDSUPPORT +#define SDSUPPORT /** * SD CARD: ENABLE CRC @@ -2006,7 +2008,7 @@ // // Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. // -//#define INDIVIDUAL_AXIS_HOMING_MENU +#define INDIVIDUAL_AXIS_HOMING_MENU // // SPEAKER/BUZZER @@ -2287,7 +2289,7 @@ // This is RAMPS-compatible using a single 10-pin connector. // (For CR-10 owners who want to replace the Melzi Creality board but retain the display) // -//#define CR10_STOCKDISPLAY +#define CR10_STOCKDISPLAY // // Ender-2 OEM display, a variant of the MKS_MINI_12864 diff --git a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h index 5335fa012a..ae1132a4d7 100644 --- a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 2.0" + /** * Configuration_adv.h * @@ -461,7 +463,7 @@ * The fan turns on automatically whenever any driver is enabled and turns * off (or reduces to idle speed) shortly after drivers are turned off. */ -//#define USE_CONTROLLER_FAN +#define USE_CONTROLLER_FAN #if ENABLED(USE_CONTROLLER_FAN) //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan //#define CONTROLLER_FAN_USE_Z_ONLY // With this option only the Z axis is considered @@ -470,7 +472,7 @@ #define CONTROLLERFAN_SPEED_ACTIVE 255 // (0-255) Active speed, used when any motor is enabled #define CONTROLLERFAN_SPEED_IDLE 0 // (0-255) Idle speed, used when motors are disabled #define CONTROLLERFAN_IDLE_TIME 60 // (seconds) Extra time to keep the fan running after disabling motors - //#define CONTROLLER_FAN_EDITABLE // Enable M710 configurable settings + #define CONTROLLER_FAN_EDITABLE // Enable M710 configurable settings #if ENABLED(CONTROLLER_FAN_EDITABLE) #define CONTROLLER_FAN_MENU // Enable the Controller Fan submenu #endif @@ -736,12 +738,12 @@ //#define SENSORLESS_BACKOFF_MM { 2, 2 } // (mm) Backoff from endstops before sensorless homing -#define HOMING_BUMP_MM { 5, 5, 2 } // (mm) Backoff from endstops after first bump +#define HOMING_BUMP_MM { 0, 0, 2 } // (mm) Backoff from endstops after first bump #define HOMING_BUMP_DIVISOR { 2, 2, 4 } // Re-Bump Speed Divisor (Divides the Homing Feedrate) //#define HOMING_BACKOFF_POST_MM { 2, 2, 2 } // (mm) Backoff from endstops after homing -//#define QUICK_HOME // If G28 contains XY do a diagonal move first +#define QUICK_HOME // If G28 contains XY do a diagonal move first //#define HOME_Y_BEFORE_X // If G28 contains XY home Y before X //#define HOME_Z_FIRST // Home Z first. Requires a Z-MIN endstop (not a probe). //#define CODEPENDENT_XY_HOMING // If X/Y can't home without homing Y/X first @@ -1175,7 +1177,7 @@ #endif // Include a page of printer information in the LCD Main Menu - //#define LCD_INFO_MENU + #define LCD_INFO_MENU #if ENABLED(LCD_INFO_MENU) //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages #endif @@ -1229,13 +1231,13 @@ #endif // Scroll a longer status message into view - //#define STATUS_MESSAGE_SCROLLING + #define STATUS_MESSAGE_SCROLLING // On the Info Screen, display XY with one decimal place when possible //#define LCD_DECIMAL_SMALL_XY // Add an 'M73' G-code to set the current percentage - //#define LCD_SET_PROGRESS_MANUALLY + #define LCD_SET_PROGRESS_MANUALLY // Show the E position (filament used) during printing //#define LCD_SHOW_E_TOTAL @@ -1281,7 +1283,7 @@ //#define SD_DETECT_STATE HIGH //#define SD_IGNORE_AT_STARTUP // Don't mount the SD card when starting up - //#define SDCARD_READONLY // Read-only SD card (to save over 2K of flash) + #define SDCARD_READONLY // Read-only SD card (to save over 2K of flash) //#define GCODE_REPEAT_MARKERS // Enable G-code M808 to set repeat markers and do looping @@ -1361,16 +1363,16 @@ * - SDSORT_CACHE_NAMES will retain the sorted file listing in RAM. (Expensive!) * - SDSORT_DYNAMIC_RAM only uses RAM when the SD menu is visible. (Use with caution!) */ - //#define SDCARD_SORT_ALPHA + #define SDCARD_SORT_ALPHA // SD Card Sorting options #if ENABLED(SDCARD_SORT_ALPHA) #define SDSORT_LIMIT 40 // Maximum number of sorted items (10-256). Costs 27 bytes each. #define FOLDER_SORTING -1 // -1=above 0=none 1=below #define SDSORT_GCODE false // Allow turning sorting on/off with LCD and M34 G-code. - #define SDSORT_USES_RAM false // Pre-allocate a static array for faster pre-sorting. + #define SDSORT_USES_RAM true // Pre-allocate a static array for faster pre-sorting. #define SDSORT_USES_STACK false // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.) - #define SDSORT_CACHE_NAMES false // Keep sorted items in RAM longer for speedy performance. Most expensive option. + #define SDSORT_CACHE_NAMES true // Keep sorted items in RAM longer for speedy performance. Most expensive option. #define SDSORT_DYNAMIC_RAM false // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use! #define SDSORT_CACHE_VFATS 2 // Maximum number of 13-byte VFAT entries to use for sorting. // Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM. @@ -1381,10 +1383,10 @@ //#define UTF_FILENAME_SUPPORT // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT + #define LONG_FILENAME_HOST_SUPPORT // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES + #define SCROLL_LONG_FILENAMES // Leave the heaters on after Stop Print (not recommended!) //#define SD_ABORT_NO_COOLDOWN @@ -1476,7 +1478,7 @@ * * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] */ - //#define SDCARD_CONNECTION LCD + #define SDCARD_CONNECTION ONBOARD // Enable if SD detect is rendered useless (e.g., by using an SD extender) //#define NO_SD_DETECT @@ -1790,7 +1792,7 @@ * * Warning: Does not respect endstops! */ -//#define BABYSTEPPING +#define BABYSTEPPING #if ENABLED(BABYSTEPPING) //#define INTEGRATED_BABYSTEPPING // EXPERIMENTAL integration of babystepping into the Stepper ISR //#define BABYSTEP_WITHOUT_HOMING @@ -1801,7 +1803,7 @@ #define BABYSTEP_MULTIPLICATOR_Z 1 // (steps or mm) Steps or millimeter distance for each Z babystep #define BABYSTEP_MULTIPLICATOR_XY 1 // (steps or mm) Steps or millimeter distance for each XY babystep - //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. + #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. // Note: Extra time may be added to mitigate controller latency. @@ -1837,12 +1839,12 @@ * * See https://marlinfw.org/docs/features/lin_advance.html for full instructions. */ -//#define LIN_ADVANCE +#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) //#define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants - #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed + #define LIN_ADVANCE_K 0.0 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // If enabled, this will generate debug information output over USB. - //#define EXPERIMENTAL_SCURVE // Enable this option to permit S-Curve Acceleration + #define EXPERIMENTAL_SCURVE // Enable this option to permit S-Curve Acceleration #endif // @section leveling @@ -1982,7 +1984,7 @@ // // G2/G3 Arc Support // -#define ARC_SUPPORT // Disable this feature to save ~3226 bytes +//#define ARC_SUPPORT // Disable this feature to save ~3226 bytes #if ENABLED(ARC_SUPPORT) #define MM_PER_ARC_SEGMENT 1 // (mm) Length (or minimum length) of each arc segment //#define ARC_SEGMENTS_PER_R 1 // Max segment length, MM_PER = Min @@ -2141,7 +2143,7 @@ * Currently handles M108, M112, M410, M876 * NOTE: Not yet implemented for all platforms. */ -//#define EMERGENCY_PARSER +#define EMERGENCY_PARSER /** * Realtime Reporting (requires EMERGENCY_PARSER) @@ -2311,14 +2313,14 @@ * * Enable PARK_HEAD_ON_PAUSE to add the G-code M125 Pause and Park. */ -//#define ADVANCED_PAUSE_FEATURE +#define ADVANCED_PAUSE_FEATURE #if ENABLED(ADVANCED_PAUSE_FEATURE) #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. // This short retract is done immediately, before parking the nozzle. #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast. #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload. + #define FILAMENT_CHANGE_UNLOAD_LENGTH 400 // (mm) The length of filament for a complete unload. // For Bowden, the full length of the tube and nozzle. // For direct drive, the full length of the nozzle. // Set to 0 for manual unloading. @@ -2327,7 +2329,7 @@ // 0 to disable start loading and skip to fast load only #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast. #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle. + #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 350 // (mm) Load length of filament, from extruder gear to nozzle. // For Bowden, the full length of the tube and nozzle. // For direct drive, the full length of the nozzle. //#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted. @@ -2349,10 +2351,10 @@ #define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed. #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change. - //#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. - //#define HOME_BEFORE_FILAMENT_CHANGE // If needed, home before parking for filament change + #define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. + #define HOME_BEFORE_FILAMENT_CHANGE // If needed, home before parking for filament change - //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. + #define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) #endif @@ -2493,8 +2495,8 @@ #define INTERPOLATE true #if AXIS_IS_TMC(X) - #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. - #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for sensorless homing + #define X_CURRENT 580 // (mA) RMS current. Multiply by 1.414 for peak current. + #define X_CURRENT_HOME (X_CURRENT/2) // (mA) RMS current for sensorless homing #define X_MICROSTEPS 16 // 0..256 #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... @@ -2511,8 +2513,8 @@ #endif #if AXIS_IS_TMC(Y) - #define Y_CURRENT 800 - #define Y_CURRENT_HOME Y_CURRENT + #define Y_CURRENT 580 + #define Y_CURRENT_HOME (Y_CURRENT/2) #define Y_MICROSTEPS 16 #define Y_RSENSE 0.11 #define Y_CHAIN_POS -1 @@ -2529,7 +2531,7 @@ #endif #if AXIS_IS_TMC(Z) - #define Z_CURRENT 800 + #define Z_CURRENT 580 #define Z_CURRENT_HOME Z_CURRENT #define Z_MICROSTEPS 16 #define Z_RSENSE 0.11 @@ -2565,7 +2567,7 @@ #endif #if AXIS_IS_TMC(E0) - #define E0_CURRENT 800 + #define E0_CURRENT 650 #define E0_MICROSTEPS 16 #define E0_RSENSE 0.11 #define E0_CHAIN_POS -1 @@ -2670,15 +2672,15 @@ * Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers * on the same serial port, either here or in your board's pins file. */ - //#define X_SLAVE_ADDRESS 0 - //#define Y_SLAVE_ADDRESS 0 - //#define Z_SLAVE_ADDRESS 0 + #define X_SLAVE_ADDRESS 0 + #define Y_SLAVE_ADDRESS 2 + #define Z_SLAVE_ADDRESS 1 //#define X2_SLAVE_ADDRESS 0 //#define Y2_SLAVE_ADDRESS 0 //#define Z2_SLAVE_ADDRESS 0 //#define Z3_SLAVE_ADDRESS 0 //#define Z4_SLAVE_ADDRESS 0 - //#define E0_SLAVE_ADDRESS 0 + #define E0_SLAVE_ADDRESS 3 //#define E1_SLAVE_ADDRESS 0 //#define E2_SLAVE_ADDRESS 0 //#define E3_SLAVE_ADDRESS 0 @@ -2719,7 +2721,7 @@ * Define your own with: * { , , hysteresis_start[1..8] } */ - #define CHOPPER_TIMING CHOPPER_DEFAULT_12V // All axes (override below) + #define CHOPPER_TIMING CHOPPER_DEFAULT_24V // All axes (override below) //#define CHOPPER_TIMING_X CHOPPER_TIMING // For X Axes (override below) //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X //#define CHOPPER_TIMING_Y CHOPPER_TIMING // For Y Axes (override below) @@ -2811,16 +2813,16 @@ #if EITHER(SENSORLESS_HOMING, SENSORLESS_PROBING) // TMC2209: 0...255. TMC2130: -64...63 - #define X_STALL_SENSITIVITY 8 + #define X_STALL_SENSITIVITY 75 #define X2_STALL_SENSITIVITY X_STALL_SENSITIVITY - #define Y_STALL_SENSITIVITY 8 + #define Y_STALL_SENSITIVITY 75 #define Y2_STALL_SENSITIVITY Y_STALL_SENSITIVITY //#define Z_STALL_SENSITIVITY 8 //#define Z2_STALL_SENSITIVITY Z_STALL_SENSITIVITY //#define Z3_STALL_SENSITIVITY Z_STALL_SENSITIVITY //#define Z4_STALL_SENSITIVITY Z_STALL_SENSITIVITY //#define SPI_ENDSTOPS // TMC2130 only - //#define IMPROVE_HOMING_RELIABILITY + #define IMPROVE_HOMING_RELIABILITY #endif /** @@ -2839,7 +2841,7 @@ * Beta feature! * Create a 50/50 square wave step pulse optimal for stepper drivers. */ - //#define SQUARE_WAVE_STEPPING + #define SQUARE_WAVE_STEPPING /** * Enable M122 debugging command for TMC stepper drivers. diff --git a/config/examples/Creality/Ender-3 Pro/CrealityV1/Configuration.h b/config/examples/Creality/Ender-3 Pro/CrealityV1/Configuration.h index 78c2dc9160..dbe0bd3638 100644 --- a/config/examples/Creality/Ender-3 Pro/CrealityV1/Configuration.h +++ b/config/examples/Creality/Ender-3 Pro/CrealityV1/Configuration.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Creality/Ender-3 Pro/CrealityV1" + /** * Configuration.h * @@ -69,7 +71,7 @@ // @section info // Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes. +#define STRING_CONFIG_H_AUTHOR "(thisiskeithb, Ender-3 Pro)" // Who made the changes. //#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) /** @@ -87,10 +89,10 @@ #define SHOW_BOOTSCREEN // Show the bitmap in Marlin/_Bootscreen.h on startup. -//#define SHOW_CUSTOM_BOOTSCREEN +#define SHOW_CUSTOM_BOOTSCREEN // Show the bitmap in Marlin/_Statusscreen.h on the status screen. -//#define CUSTOM_STATUS_SCREEN_IMAGE +#define CUSTOM_STATUS_SCREEN_IMAGE // @section machine @@ -127,18 +129,18 @@ * * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ -#define BAUDRATE 250000 +#define BAUDRATE 115200 // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH // Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_RAMPS_14_EFB + #define MOTHERBOARD BOARD_MELZI_CREALITY #endif // Name displayed in the LCD "Ready" message and Info menu -//#define CUSTOM_MACHINE_NAME "3D Printer" +#define CUSTOM_MACHINE_NAME "Ender-3 Pro" // Printer's unique ID, used by some programs to differentiate between machines. // Choose your own or use a service like https://www.uuidgenerator.net/version4 @@ -424,7 +426,7 @@ #define TEMP_SENSOR_5 0 #define TEMP_SENSOR_6 0 #define TEMP_SENSOR_7 0 -#define TEMP_SENSOR_BED 0 +#define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 #define TEMP_SENSOR_COOLER 0 @@ -480,7 +482,7 @@ #define HEATER_5_MAXTEMP 275 #define HEATER_6_MAXTEMP 275 #define HEATER_7_MAXTEMP 275 -#define BED_MAXTEMP 150 +#define BED_MAXTEMP 125 #define CHAMBER_MAXTEMP 60 /** @@ -505,21 +507,22 @@ #define PID_K1 0.95 // Smoothing factor within any PID loop #if ENABLED(PIDTEMP) - //#define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) - //#define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) + #define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) + #define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) // Set/get with gcode: M301 E[extruder number, 0-2] + // Creality Ender-3 #if ENABLED(PID_PARAMS_PER_HOTEND) // Specify between 1 and HOTENDS values per array. // If fewer than EXTRUDER values are provided, the last element will be repeated. - #define DEFAULT_Kp_LIST { 22.20, 22.20 } - #define DEFAULT_Ki_LIST { 1.08, 1.08 } - #define DEFAULT_Kd_LIST { 114.00, 114.00 } + #define DEFAULT_Kp_LIST { 21.73, 21.73 } + #define DEFAULT_Ki_LIST { 1.54, 1.54 } + #define DEFAULT_Kd_LIST { 76.55, 76.55 } #else - #define DEFAULT_Kp 22.20 - #define DEFAULT_Ki 1.08 - #define DEFAULT_Kd 114.00 + #define DEFAULT_Kp 21.73 + #define DEFAULT_Ki 1.54 + #define DEFAULT_Kd 76.55 #endif #endif // PIDTEMP @@ -806,14 +809,14 @@ * Override with M92 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 500 } +#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 93 } /** * Default Max Feed Rate (mm/s) * Override with M203 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 } +#define DEFAULT_MAX_FEEDRATE { 500, 500, 5, 25 } //#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 #if ENABLED(LIMITED_MAX_FR_EDITING) @@ -826,7 +829,7 @@ * Override with M201 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 } +#define DEFAULT_MAX_ACCELERATION { 500, 500, 100, 5000 } //#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 #if ENABLED(LIMITED_MAX_ACCEL_EDITING) @@ -841,9 +844,9 @@ * M204 R Retract Acceleration * M204 T Travel Acceleration */ -#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves +#define DEFAULT_ACCELERATION 500 // X, Y, Z and E acceleration for printing moves +#define DEFAULT_RETRACT_ACCELERATION 500 // E acceleration for retracts +#define DEFAULT_TRAVEL_ACCELERATION 500 // X, Y, Z acceleration for travel (non printing) moves /** * Default Jerk limits (mm/s) @@ -877,7 +880,7 @@ * https://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html */ #if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.013 // (mm) Distance from real junction edge + #define JUNCTION_DEVIATION_MM 0.08 // (mm) Distance from real junction edge #define JD_HANDLE_SMALL_SEGMENTS // Use curvature estimation instead of just the junction angle // for small segments (< 1mm) with large junction angles (> 135°). #endif @@ -1185,19 +1188,19 @@ // @section extruder #define DISABLE_E false // Disable the extruder when not stepping -#define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled +//#define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled // @section machine // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR false +#define INVERT_X_DIR true #define INVERT_Y_DIR true #define INVERT_Z_DIR false // @section extruder // For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR false +#define INVERT_E0_DIR true #define INVERT_E1_DIR false #define INVERT_E2_DIR false #define INVERT_E3_DIR false @@ -1232,8 +1235,8 @@ // @section machine // The size of the printable area -#define X_BED_SIZE 200 -#define Y_BED_SIZE 200 +#define X_BED_SIZE 235 +#define Y_BED_SIZE 235 // Travel limits (mm) after homing, corresponding to endstop positions. #define X_MIN_POS 0 @@ -1241,7 +1244,7 @@ #define Z_MIN_POS 0 #define X_MAX_POS X_BED_SIZE #define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 200 +#define Z_MAX_POS 250 /** * Software Endstops @@ -1595,7 +1598,7 @@ #endif // Homing speeds (mm/min) -#define HOMING_FEEDRATE_MM_M { (50*60), (50*60), (4*60) } +#define HOMING_FEEDRATE_MM_M { (20*60), (20*60), (4*60) } // Validate that endstops are triggered on homing moves #define VALIDATE_HOMING_ENDSTOPS @@ -1672,7 +1675,7 @@ * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) */ -//#define EEPROM_SETTINGS // Persistent storage with M500 and M501 +#define EEPROM_SETTINGS // Persistent storage with M500 and M501 //#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. #define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load @@ -1706,16 +1709,16 @@ // Preheat Constants - Up to 5 are supported without changes // #define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 180 -#define PREHEAT_1_TEMP_BED 70 +#define PREHEAT_1_TEMP_HOTEND 185 +#define PREHEAT_1_TEMP_BED 45 #define PREHEAT_1_TEMP_CHAMBER 35 -#define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 +#define PREHEAT_1_FAN_SPEED 255 // Value from 0 to 255 #define PREHEAT_2_LABEL "ABS" #define PREHEAT_2_TEMP_HOTEND 240 -#define PREHEAT_2_TEMP_BED 110 +#define PREHEAT_2_TEMP_BED 70 #define PREHEAT_2_TEMP_CHAMBER 35 -#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 +#define PREHEAT_2_FAN_SPEED 255 // Value from 0 to 255 /** * Nozzle Park @@ -1936,7 +1939,7 @@ * SD Card support is disabled by default. If your controller has an SD slot, * you must uncomment the following option or it won't work. */ -//#define SDSUPPORT +#define SDSUPPORT /** * SD CARD: ENABLE CRC @@ -2014,7 +2017,7 @@ // If you have a speaker that can produce tones, enable it here. // By default Marlin assumes you have a buzzer with a fixed frequency. // -//#define SPEAKER +#define SPEAKER // // The duration and frequency for the UI feedback sound. @@ -2287,7 +2290,7 @@ // This is RAMPS-compatible using a single 10-pin connector. // (For CR-10 owners who want to replace the Melzi Creality board but retain the display) // -//#define CR10_STOCKDISPLAY +#define CR10_STOCKDISPLAY // // Ender-2 OEM display, a variant of the MKS_MINI_12864 diff --git a/config/examples/Creality/Ender-3 Pro/CrealityV1/Configuration_adv.h b/config/examples/Creality/Ender-3 Pro/CrealityV1/Configuration_adv.h index 5335fa012a..c39c4f4b95 100644 --- a/config/examples/Creality/Ender-3 Pro/CrealityV1/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 Pro/CrealityV1/Configuration_adv.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Creality/Ender-3 Pro/CrealityV1" + /** * Configuration_adv.h * @@ -741,7 +743,7 @@ //#define HOMING_BACKOFF_POST_MM { 2, 2, 2 } // (mm) Backoff from endstops after homing -//#define QUICK_HOME // If G28 contains XY do a diagonal move first +#define QUICK_HOME // If G28 contains XY do a diagonal move first //#define HOME_Y_BEFORE_X // If G28 contains XY home Y before X //#define HOME_Z_FIRST // Home Z first. Requires a Z-MIN endstop (not a probe). //#define CODEPENDENT_XY_HOMING // If X/Y can't home without homing Y/X first @@ -792,7 +794,7 @@ * differs, a mode set eeprom write will be completed at initialization. * Use the option below to force an eeprom write to a V3.1 probe regardless. */ - //#define BLTOUCH_SET_5V_MODE + #define BLTOUCH_SET_5V_MODE /** * Safety: Activate if connecting a probe with an unknown voltage mode. @@ -1175,7 +1177,7 @@ #endif // Include a page of printer information in the LCD Main Menu - //#define LCD_INFO_MENU + #define LCD_INFO_MENU #if ENABLED(LCD_INFO_MENU) //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages #endif @@ -1229,7 +1231,7 @@ #endif // Scroll a longer status message into view - //#define STATUS_MESSAGE_SCROLLING + #define STATUS_MESSAGE_SCROLLING // On the Info Screen, display XY with one decimal place when possible //#define LCD_DECIMAL_SMALL_XY @@ -1281,7 +1283,7 @@ //#define SD_DETECT_STATE HIGH //#define SD_IGNORE_AT_STARTUP // Don't mount the SD card when starting up - //#define SDCARD_READONLY // Read-only SD card (to save over 2K of flash) + #define SDCARD_READONLY // Read-only SD card (to save over 2K of flash) //#define GCODE_REPEAT_MARKERS // Enable G-code M808 to set repeat markers and do looping @@ -1384,7 +1386,7 @@ //#define LONG_FILENAME_HOST_SUPPORT // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES + #define SCROLL_LONG_FILENAMES // Leave the heaters on after Stop Print (not recommended!) //#define SD_ABORT_NO_COOLDOWN @@ -1790,7 +1792,7 @@ * * Warning: Does not respect endstops! */ -//#define BABYSTEPPING +#define BABYSTEPPING #if ENABLED(BABYSTEPPING) //#define INTEGRATED_BABYSTEPPING // EXPERIMENTAL integration of babystepping into the Stepper ISR //#define BABYSTEP_WITHOUT_HOMING @@ -1801,7 +1803,7 @@ #define BABYSTEP_MULTIPLICATOR_Z 1 // (steps or mm) Steps or millimeter distance for each Z babystep #define BABYSTEP_MULTIPLICATOR_XY 1 // (steps or mm) Steps or millimeter distance for each XY babystep - //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. + #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. // Note: Extra time may be added to mitigate controller latency. @@ -2493,7 +2495,7 @@ #define INTERPOLATE true #if AXIS_IS_TMC(X) - #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. + #define X_CURRENT 580 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for sensorless homing #define X_MICROSTEPS 16 // 0..256 #define X_RSENSE 0.11 @@ -2511,7 +2513,7 @@ #endif #if AXIS_IS_TMC(Y) - #define Y_CURRENT 800 + #define Y_CURRENT 580 #define Y_CURRENT_HOME Y_CURRENT #define Y_MICROSTEPS 16 #define Y_RSENSE 0.11 @@ -2529,7 +2531,7 @@ #endif #if AXIS_IS_TMC(Z) - #define Z_CURRENT 800 + #define Z_CURRENT 580 #define Z_CURRENT_HOME Z_CURRENT #define Z_MICROSTEPS 16 #define Z_RSENSE 0.11 @@ -2565,7 +2567,7 @@ #endif #if AXIS_IS_TMC(E0) - #define E0_CURRENT 800 + #define E0_CURRENT 650 #define E0_MICROSTEPS 16 #define E0_RSENSE 0.11 #define E0_CHAIN_POS -1 @@ -2719,7 +2721,7 @@ * Define your own with: * { , , hysteresis_start[1..8] } */ - #define CHOPPER_TIMING CHOPPER_DEFAULT_12V // All axes (override below) + #define CHOPPER_TIMING CHOPPER_DEFAULT_24V // All axes (override below) //#define CHOPPER_TIMING_X CHOPPER_TIMING // For X Axes (override below) //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X //#define CHOPPER_TIMING_Y CHOPPER_TIMING // For Y Axes (override below) diff --git a/config/examples/Creality/Ender-3 Pro/CrealityV422/Configuration.h b/config/examples/Creality/Ender-3 Pro/CrealityV422/Configuration.h index 78c2dc9160..57d04f6014 100644 --- a/config/examples/Creality/Ender-3 Pro/CrealityV422/Configuration.h +++ b/config/examples/Creality/Ender-3 Pro/CrealityV422/Configuration.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Creality/Ender-3 Pro/CrealityV422" + /** * Configuration.h * @@ -87,10 +89,10 @@ #define SHOW_BOOTSCREEN // Show the bitmap in Marlin/_Bootscreen.h on startup. -//#define SHOW_CUSTOM_BOOTSCREEN +#define SHOW_CUSTOM_BOOTSCREEN // Show the bitmap in Marlin/_Statusscreen.h on the status screen. -//#define CUSTOM_STATUS_SCREEN_IMAGE +#define CUSTOM_STATUS_SCREEN_IMAGE // @section machine @@ -102,14 +104,14 @@ * * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] */ -#define SERIAL_PORT 0 +#define SERIAL_PORT 1 /** * Select a secondary serial port on the board to use for communication with the host. * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] */ -//#define SERIAL_PORT_2 -1 +#define SERIAL_PORT_2 3 /** * Select a third serial port on the board to use for communication with the host. @@ -127,18 +129,18 @@ * * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ -#define BAUDRATE 250000 +#define BAUDRATE 115200 // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH // Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_RAMPS_14_EFB + #define MOTHERBOARD BOARD_CREALITY_V4 #endif // Name displayed in the LCD "Ready" message and Info menu -//#define CUSTOM_MACHINE_NAME "3D Printer" +#define CUSTOM_MACHINE_NAME "Ender-3 Pro V1.5" // Printer's unique ID, used by some programs to differentiate between machines. // Choose your own or use a service like https://www.uuidgenerator.net/version4 @@ -424,7 +426,7 @@ #define TEMP_SENSOR_5 0 #define TEMP_SENSOR_6 0 #define TEMP_SENSOR_7 0 -#define TEMP_SENSOR_BED 0 +#define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 #define TEMP_SENSOR_COOLER 0 @@ -458,7 +460,7 @@ // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. -#define HEATER_0_MINTEMP 5 +#define HEATER_0_MINTEMP 0 #define HEATER_1_MINTEMP 5 #define HEATER_2_MINTEMP 5 #define HEATER_3_MINTEMP 5 @@ -466,7 +468,7 @@ #define HEATER_5_MINTEMP 5 #define HEATER_6_MINTEMP 5 #define HEATER_7_MINTEMP 5 -#define BED_MINTEMP 5 +#define BED_MINTEMP 0 #define CHAMBER_MINTEMP 5 // Above this temperature the heater will be switched off. @@ -480,7 +482,7 @@ #define HEATER_5_MAXTEMP 275 #define HEATER_6_MAXTEMP 275 #define HEATER_7_MAXTEMP 275 -#define BED_MAXTEMP 150 +#define BED_MAXTEMP 120 #define CHAMBER_MAXTEMP 60 /** @@ -510,16 +512,17 @@ //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) // Set/get with gcode: M301 E[extruder number, 0-2] + // Ender 3 v2 #if ENABLED(PID_PARAMS_PER_HOTEND) // Specify between 1 and HOTENDS values per array. // If fewer than EXTRUDER values are provided, the last element will be repeated. - #define DEFAULT_Kp_LIST { 22.20, 22.20 } - #define DEFAULT_Ki_LIST { 1.08, 1.08 } - #define DEFAULT_Kd_LIST { 114.00, 114.00 } + #define DEFAULT_Kp_LIST { 28.72, 28.72 } + #define DEFAULT_Ki_LIST { 2.62, 2.62 } + #define DEFAULT_Kd_LIST { 78.81, 78.81 } #else - #define DEFAULT_Kp 22.20 - #define DEFAULT_Ki 1.08 - #define DEFAULT_Kd 114.00 + #define DEFAULT_Kp 28.72 + #define DEFAULT_Ki 2.62 + #define DEFAULT_Kd 78.81 #endif #endif // PIDTEMP @@ -540,7 +543,7 @@ * heater. If your configuration is significantly different than this and you don't understand * the issues involved, don't use bed PID until someone else verifies that your hardware works. */ -//#define PIDTEMPBED +#define PIDTEMPBED //#define BED_LIMIT_SWITCHING @@ -558,9 +561,9 @@ // 120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) // from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) - #define DEFAULT_bedKp 10.00 - #define DEFAULT_bedKi .023 - #define DEFAULT_bedKd 305.4 + #define DEFAULT_bedKp 462.10 + #define DEFAULT_bedKi 85.47 + #define DEFAULT_bedKd 624.59 // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. #endif // PIDTEMPBED @@ -627,14 +630,14 @@ * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** */ #define PREVENT_COLD_EXTRUSION -#define EXTRUDE_MINTEMP 170 +#define EXTRUDE_MINTEMP 180 /** * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. * Note: For Bowden Extruders make this large enough to allow load/unload. */ #define PREVENT_LENGTHY_EXTRUDE -#define EXTRUDE_MAXLENGTH 200 +#define EXTRUDE_MAXLENGTH 1000 //=========================================================================== //======================== Thermal Runaway Protection ======================= @@ -655,7 +658,7 @@ #define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders #define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed -#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber +//#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber #define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling //=========================================================================== @@ -743,9 +746,12 @@ * TMC5130, TMC5130_STANDALONE, TMC5160, TMC5160_STANDALONE * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'L6474', 'POWERSTEP01', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2160', 'TMC2160_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC2209', 'TMC2209_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE', 'TMC5160', 'TMC5160_STANDALONE'] */ -#define X_DRIVER_TYPE A4988 -#define Y_DRIVER_TYPE A4988 -#define Z_DRIVER_TYPE A4988 + +#warning "Creality 4.2.2 boards may have A4988 or TMC2208_STANDALONE drivers. Check your board and make sure to select the correct DRIVER_TYPE!" + +#define X_DRIVER_TYPE A4988 +#define Y_DRIVER_TYPE A4988 +#define Z_DRIVER_TYPE A4988 //#define X2_DRIVER_TYPE A4988 //#define Y2_DRIVER_TYPE A4988 //#define Z2_DRIVER_TYPE A4988 @@ -762,7 +768,7 @@ // Enable this feature if all enabled endstop pins are interrupt-capable. // This will remove the need to poll the interrupt pins, saving many CPU cycles. -//#define ENDSTOP_INTERRUPTS_FEATURE +#define ENDSTOP_INTERRUPTS_FEATURE /** * Endstop Noise Threshold @@ -806,14 +812,14 @@ * Override with M92 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 500 } +#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 93 } /** * Default Max Feed Rate (mm/s) * Override with M203 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 } +#define DEFAULT_MAX_FEEDRATE { 500, 500, 5, 25 } //#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 #if ENABLED(LIMITED_MAX_FR_EDITING) @@ -826,7 +832,7 @@ * Override with M201 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 } +#define DEFAULT_MAX_ACCELERATION { 500, 500, 100, 1000 } //#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 #if ENABLED(LIMITED_MAX_ACCEL_EDITING) @@ -841,9 +847,9 @@ * M204 R Retract Acceleration * M204 T Travel Acceleration */ -#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves +#define DEFAULT_ACCELERATION 500 // X, Y, Z and E acceleration for printing moves +#define DEFAULT_RETRACT_ACCELERATION 500 // E acceleration for retracts +#define DEFAULT_TRAVEL_ACCELERATION 1000 // X, Y, Z acceleration for travel (non printing) moves /** * Default Jerk limits (mm/s) @@ -853,7 +859,7 @@ * When changing speed and direction, if the difference is less than the * value set here, it may happen instantaneously. */ -//#define CLASSIC_JERK +#define CLASSIC_JERK #if ENABLED(CLASSIC_JERK) #define DEFAULT_XJERK 10.0 #define DEFAULT_YJERK 10.0 @@ -1062,7 +1068,7 @@ #define PROBING_MARGIN 10 // X and Y axis travel speed (mm/min) between probes -#define XY_PROBE_FEEDRATE (133*60) +#define XY_PROBE_FEEDRATE (50*60) // Feedrate (mm/min) for the first approach when double-probing (MULTIPLE_PROBING == 2) #define Z_PROBE_FEEDRATE_FAST (4*60) @@ -1131,8 +1137,8 @@ #define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping // For M851 give a range for adjusting the Z probe offset -#define Z_PROBE_OFFSET_RANGE_MIN -20 -#define Z_PROBE_OFFSET_RANGE_MAX 20 +#define Z_PROBE_OFFSET_RANGE_MIN -10 +#define Z_PROBE_OFFSET_RANGE_MAX 10 // Enable the M48 repeatability test to test probe accuracy //#define Z_MIN_PROBE_REPEATABILITY_TEST @@ -1191,8 +1197,8 @@ // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR false -#define INVERT_Y_DIR true -#define INVERT_Z_DIR false +#define INVERT_Y_DIR false +#define INVERT_Z_DIR true // @section extruder @@ -1232,8 +1238,8 @@ // @section machine // The size of the printable area -#define X_BED_SIZE 200 -#define Y_BED_SIZE 200 +#define X_BED_SIZE 235 +#define Y_BED_SIZE 235 // Travel limits (mm) after homing, corresponding to endstop positions. #define X_MIN_POS 0 @@ -1241,7 +1247,7 @@ #define Z_MIN_POS 0 #define X_MAX_POS X_BED_SIZE #define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 200 +#define Z_MAX_POS 250 /** * Software Endstops @@ -1464,7 +1470,7 @@ // Beyond the probed grid, continue the implied tilt? // Default is to maintain the height of the nearest edge. - //#define EXTRAPOLATE_BEYOND_GRID + #define EXTRAPOLATE_BEYOND_GRID // // Experimental Subdivision of the grid by Catmull-Rom method. @@ -1590,8 +1596,8 @@ //#define Z_SAFE_HOMING #if ENABLED(Z_SAFE_HOMING) - #define Z_SAFE_HOMING_X_POINT X_CENTER // X point for Z homing - #define Z_SAFE_HOMING_Y_POINT Y_CENTER // Y point for Z homing + #define Z_SAFE_HOMING_X_POINT ((X_BED_SIZE - 10) / 2) // X point for Z homing + #define Z_SAFE_HOMING_Y_POINT ((Y_BED_SIZE - 10) / 2) // Y point for Z homing #endif // Homing speeds (mm/min) @@ -1672,12 +1678,12 @@ * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) */ -//#define EEPROM_SETTINGS // Persistent storage with M500 and M501 +#define EEPROM_SETTINGS // Persistent storage with M500 and M501 //#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! -#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. +//#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. #define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load #if ENABLED(EEPROM_SETTINGS) - //#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. + #define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. #endif // @@ -1706,16 +1712,16 @@ // Preheat Constants - Up to 5 are supported without changes // #define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 180 -#define PREHEAT_1_TEMP_BED 70 +#define PREHEAT_1_TEMP_HOTEND 185 +#define PREHEAT_1_TEMP_BED 45 #define PREHEAT_1_TEMP_CHAMBER 35 -#define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 +#define PREHEAT_1_FAN_SPEED 255 // Value from 0 to 255 #define PREHEAT_2_LABEL "ABS" #define PREHEAT_2_TEMP_HOTEND 240 -#define PREHEAT_2_TEMP_BED 110 +#define PREHEAT_2_TEMP_BED 70 #define PREHEAT_2_TEMP_CHAMBER 35 -#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 +#define PREHEAT_2_FAN_SPEED 255 // Value from 0 to 255 /** * Nozzle Park @@ -1936,7 +1942,7 @@ * SD Card support is disabled by default. If your controller has an SD slot, * you must uncomment the following option or it won't work. */ -//#define SDSUPPORT +#define SDSUPPORT /** * SD CARD: ENABLE CRC @@ -1960,13 +1966,13 @@ // This option overrides the default number of encoder pulses needed to // produce one step. Should be increased for high-resolution encoders. // -//#define ENCODER_PULSES_PER_STEP 4 +#define ENCODER_PULSES_PER_STEP 4 // // Use this option to override the number of step signals required to // move between next/prev menu items. // -//#define ENCODER_STEPS_PER_MENU_ITEM 1 +#define ENCODER_STEPS_PER_MENU_ITEM 1 /** * Encoder Direction Options @@ -2023,8 +2029,8 @@ // Note: Test audio output with the G-Code: // M300 S P // -//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 -//#define LCD_FEEDBACK_FREQUENCY_HZ 5000 +#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 +#define LCD_FEEDBACK_FREQUENCY_HZ 5000 //============================================================================= //======================== LCD / Controller Selection ========================= @@ -2287,7 +2293,10 @@ // This is RAMPS-compatible using a single 10-pin connector. // (For CR-10 owners who want to replace the Melzi Creality board but retain the display) // -//#define CR10_STOCKDISPLAY +#define CR10_STOCKDISPLAY +#if ENABLED(CR10_STOCKDISPLAY) + #define RET6_12864_LCD // Specific to the SoC (can either be RET / VET) +#endif // // Ender-2 OEM display, a variant of the MKS_MINI_12864 diff --git a/config/examples/Creality/Ender-3 Pro/CrealityV422/Configuration_adv.h b/config/examples/Creality/Ender-3 Pro/CrealityV422/Configuration_adv.h index 5335fa012a..e8079a0a44 100644 --- a/config/examples/Creality/Ender-3 Pro/CrealityV422/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 Pro/CrealityV422/Configuration_adv.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Creality/Ender-3 Pro/CrealityV422" + /** * Configuration_adv.h * @@ -258,7 +260,7 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 20 // Seconds + #define WATCH_TEMP_PERIOD 40 // Seconds #define WATCH_TEMP_INCREASE 2 // Degrees Celsius #endif @@ -266,13 +268,13 @@ * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_BED_PERIOD 180 // Seconds #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds + #define WATCH_BED_TEMP_PERIOD 180 // Seconds #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius #endif @@ -496,7 +498,7 @@ * * Define one or both of these to override the default 0-255 range. */ -//#define FAN_MIN_PWM 50 +#define FAN_MIN_PWM 50 //#define FAN_MAX_PWM 128 /** @@ -1059,7 +1061,7 @@ * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the * lowest stepping frequencies. */ -//#define ADAPTIVE_STEP_SMOOTHING +#define ADAPTIVE_STEP_SMOOTHING /** * Custom Microstepping @@ -1145,8 +1147,9 @@ // Change values more rapidly when the encoder is rotated faster #define ENCODER_RATE_MULTIPLIER #if ENABLED(ENCODER_RATE_MULTIPLIER) - #define ENCODER_10X_STEPS_PER_SEC 30 // (steps/s) Encoder rate for 10x speed - #define ENCODER_100X_STEPS_PER_SEC 80 // (steps/s) Encoder rate for 100x speed + #define ENCODER_5X_STEPS_PER_SEC 30 + #define ENCODER_10X_STEPS_PER_SEC 80 // (steps/s) Encoder rate for 10x speed + #define ENCODER_100X_STEPS_PER_SEC 130 // (steps/s) Encoder rate for 100x speed #endif // Play a beep when the feedrate is changed from the Status Screen @@ -1175,7 +1178,7 @@ #endif // Include a page of printer information in the LCD Main Menu - //#define LCD_INFO_MENU + #define LCD_INFO_MENU #if ENABLED(LCD_INFO_MENU) //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages #endif @@ -1229,7 +1232,7 @@ #endif // Scroll a longer status message into view - //#define STATUS_MESSAGE_SCROLLING + #define STATUS_MESSAGE_SCROLLING // On the Info Screen, display XY with one decimal place when possible //#define LCD_DECIMAL_SMALL_XY @@ -1315,7 +1318,7 @@ * an option on the LCD screen to continue the print from the last-known * point in the file. */ - //#define POWER_LOSS_RECOVERY + #define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) //#define BACKUP_POWER_SUPPLY // Backup power / UPS to move the steppers on power loss @@ -1361,17 +1364,17 @@ * - SDSORT_CACHE_NAMES will retain the sorted file listing in RAM. (Expensive!) * - SDSORT_DYNAMIC_RAM only uses RAM when the SD menu is visible. (Use with caution!) */ - //#define SDCARD_SORT_ALPHA + #define SDCARD_SORT_ALPHA // SD Card Sorting options #if ENABLED(SDCARD_SORT_ALPHA) #define SDSORT_LIMIT 40 // Maximum number of sorted items (10-256). Costs 27 bytes each. #define FOLDER_SORTING -1 // -1=above 0=none 1=below #define SDSORT_GCODE false // Allow turning sorting on/off with LCD and M34 G-code. - #define SDSORT_USES_RAM false // Pre-allocate a static array for faster pre-sorting. + #define SDSORT_USES_RAM true // Pre-allocate a static array for faster pre-sorting. #define SDSORT_USES_STACK false // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.) - #define SDSORT_CACHE_NAMES false // Keep sorted items in RAM longer for speedy performance. Most expensive option. - #define SDSORT_DYNAMIC_RAM false // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use! + #define SDSORT_CACHE_NAMES true // Keep sorted items in RAM longer for speedy performance. Most expensive option. + #define SDSORT_DYNAMIC_RAM true // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use! #define SDSORT_CACHE_VFATS 2 // Maximum number of 13-byte VFAT entries to use for sorting. // Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM. #endif @@ -1384,7 +1387,7 @@ //#define LONG_FILENAME_HOST_SUPPORT // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES + #define SCROLL_LONG_FILENAMES // Leave the heaters on after Stop Print (not recommended!) //#define SD_ABORT_NO_COOLDOWN @@ -1496,7 +1499,7 @@ * By default an onboard SD card reader may be shared as a USB mass- * storage device. This option hides the SD card from the host PC. */ -//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security). +#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security). /** * Additional options for Graphical Displays @@ -1790,7 +1793,7 @@ * * Warning: Does not respect endstops! */ -//#define BABYSTEPPING +#define BABYSTEPPING #if ENABLED(BABYSTEPPING) //#define INTEGRATED_BABYSTEPPING // EXPERIMENTAL integration of babystepping into the Stepper ISR //#define BABYSTEP_WITHOUT_HOMING @@ -2839,7 +2842,7 @@ * Beta feature! * Create a 50/50 square wave step pulse optimal for stepper drivers. */ - //#define SQUARE_WAVE_STEPPING + #define SQUARE_WAVE_STEPPING /** * Enable M122 debugging command for TMC stepper drivers. diff --git a/config/examples/Creality/Ender-3 Pro/CrealityV427/Configuration.h b/config/examples/Creality/Ender-3 Pro/CrealityV427/Configuration.h index 78c2dc9160..788a5fc4a2 100644 --- a/config/examples/Creality/Ender-3 Pro/CrealityV427/Configuration.h +++ b/config/examples/Creality/Ender-3 Pro/CrealityV427/Configuration.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Creality/Ender-3 Pro/CrealityV427" + /** * Configuration.h * @@ -69,7 +71,7 @@ // @section info // Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes. +#define STRING_CONFIG_H_AUTHOR "(Dust, Ender-3 Pro)" // Who made the changes. //#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) /** @@ -87,10 +89,10 @@ #define SHOW_BOOTSCREEN // Show the bitmap in Marlin/_Bootscreen.h on startup. -//#define SHOW_CUSTOM_BOOTSCREEN +#define SHOW_CUSTOM_BOOTSCREEN // Show the bitmap in Marlin/_Statusscreen.h on the status screen. -//#define CUSTOM_STATUS_SCREEN_IMAGE +#define CUSTOM_STATUS_SCREEN_IMAGE // @section machine @@ -102,7 +104,7 @@ * * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] */ -#define SERIAL_PORT 0 +#define SERIAL_PORT 1 /** * Select a secondary serial port on the board to use for communication with the host. @@ -127,18 +129,18 @@ * * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ -#define BAUDRATE 250000 +#define BAUDRATE 115200 // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH // Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_RAMPS_14_EFB + #define MOTHERBOARD BOARD_CREALITY_V427 #endif // Name displayed in the LCD "Ready" message and Info menu -//#define CUSTOM_MACHINE_NAME "3D Printer" +#define CUSTOM_MACHINE_NAME "Ender-3 Pro 4.2.7" // Printer's unique ID, used by some programs to differentiate between machines. // Choose your own or use a service like https://www.uuidgenerator.net/version4 @@ -424,7 +426,7 @@ #define TEMP_SENSOR_5 0 #define TEMP_SENSOR_6 0 #define TEMP_SENSOR_7 0 -#define TEMP_SENSOR_BED 0 +#define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 #define TEMP_SENSOR_COOLER 0 @@ -480,7 +482,7 @@ #define HEATER_5_MAXTEMP 275 #define HEATER_6_MAXTEMP 275 #define HEATER_7_MAXTEMP 275 -#define BED_MAXTEMP 150 +#define BED_MAXTEMP 125 #define CHAMBER_MAXTEMP 60 /** @@ -505,21 +507,22 @@ #define PID_K1 0.95 // Smoothing factor within any PID loop #if ENABLED(PIDTEMP) - //#define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) - //#define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) + #define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) + #define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) // Set/get with gcode: M301 E[extruder number, 0-2] + // Creality Ender-3 #if ENABLED(PID_PARAMS_PER_HOTEND) // Specify between 1 and HOTENDS values per array. // If fewer than EXTRUDER values are provided, the last element will be repeated. - #define DEFAULT_Kp_LIST { 22.20, 22.20 } - #define DEFAULT_Ki_LIST { 1.08, 1.08 } - #define DEFAULT_Kd_LIST { 114.00, 114.00 } + #define DEFAULT_Kp_LIST { 21.73, 21.73 } + #define DEFAULT_Ki_LIST { 1.54, 1.54 } + #define DEFAULT_Kd_LIST { 76.55, 76.55 } #else - #define DEFAULT_Kp 22.20 - #define DEFAULT_Ki 1.08 - #define DEFAULT_Kd 114.00 + #define DEFAULT_Kp 21.73 + #define DEFAULT_Ki 1.54 + #define DEFAULT_Kd 76.55 #endif #endif // PIDTEMP @@ -743,15 +746,15 @@ * TMC5130, TMC5130_STANDALONE, TMC5160, TMC5160_STANDALONE * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'L6474', 'POWERSTEP01', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2160', 'TMC2160_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC2209', 'TMC2209_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE', 'TMC5160', 'TMC5160_STANDALONE'] */ -#define X_DRIVER_TYPE A4988 -#define Y_DRIVER_TYPE A4988 -#define Z_DRIVER_TYPE A4988 +#define X_DRIVER_TYPE TMC2208_STANDALONE +#define Y_DRIVER_TYPE TMC2208_STANDALONE +#define Z_DRIVER_TYPE TMC2208_STANDALONE //#define X2_DRIVER_TYPE A4988 //#define Y2_DRIVER_TYPE A4988 //#define Z2_DRIVER_TYPE A4988 //#define Z3_DRIVER_TYPE A4988 //#define Z4_DRIVER_TYPE A4988 -#define E0_DRIVER_TYPE A4988 +#define E0_DRIVER_TYPE TMC2208_STANDALONE //#define E1_DRIVER_TYPE A4988 //#define E2_DRIVER_TYPE A4988 //#define E3_DRIVER_TYPE A4988 @@ -806,14 +809,14 @@ * Override with M92 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 500 } +#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 93 } /** * Default Max Feed Rate (mm/s) * Override with M203 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 } +#define DEFAULT_MAX_FEEDRATE { 500, 500, 5, 25 } //#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 #if ENABLED(LIMITED_MAX_FR_EDITING) @@ -826,7 +829,7 @@ * Override with M201 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 } +#define DEFAULT_MAX_ACCELERATION { 500, 500, 100, 5000 } //#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 #if ENABLED(LIMITED_MAX_ACCEL_EDITING) @@ -841,9 +844,9 @@ * M204 R Retract Acceleration * M204 T Travel Acceleration */ -#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves +#define DEFAULT_ACCELERATION 500 // X, Y, Z and E acceleration for printing moves +#define DEFAULT_RETRACT_ACCELERATION 500 // E acceleration for retracts +#define DEFAULT_TRAVEL_ACCELERATION 500 // X, Y, Z acceleration for travel (non printing) moves /** * Default Jerk limits (mm/s) @@ -877,7 +880,7 @@ * https://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html */ #if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.013 // (mm) Distance from real junction edge + #define JUNCTION_DEVIATION_MM 0.08 // (mm) Distance from real junction edge #define JD_HANDLE_SMALL_SEGMENTS // Use curvature estimation instead of just the junction angle // for small segments (< 1mm) with large junction angles (> 135°). #endif @@ -1185,14 +1188,14 @@ // @section extruder #define DISABLE_E false // Disable the extruder when not stepping -#define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled +//#define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled // @section machine // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR false -#define INVERT_Y_DIR true -#define INVERT_Z_DIR false +#define INVERT_Y_DIR false +#define INVERT_Z_DIR true // @section extruder @@ -1232,8 +1235,8 @@ // @section machine // The size of the printable area -#define X_BED_SIZE 200 -#define Y_BED_SIZE 200 +#define X_BED_SIZE 235 +#define Y_BED_SIZE 235 // Travel limits (mm) after homing, corresponding to endstop positions. #define X_MIN_POS 0 @@ -1241,7 +1244,7 @@ #define Z_MIN_POS 0 #define X_MAX_POS X_BED_SIZE #define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 200 +#define Z_MAX_POS 250 /** * Software Endstops @@ -1595,7 +1598,7 @@ #endif // Homing speeds (mm/min) -#define HOMING_FEEDRATE_MM_M { (50*60), (50*60), (4*60) } +#define HOMING_FEEDRATE_MM_M { (20*60), (20*60), (4*60) } // Validate that endstops are triggered on homing moves #define VALIDATE_HOMING_ENDSTOPS @@ -1672,7 +1675,7 @@ * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) */ -//#define EEPROM_SETTINGS // Persistent storage with M500 and M501 +#define EEPROM_SETTINGS // Persistent storage with M500 and M501 //#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. #define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load @@ -1706,16 +1709,16 @@ // Preheat Constants - Up to 5 are supported without changes // #define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 180 -#define PREHEAT_1_TEMP_BED 70 +#define PREHEAT_1_TEMP_HOTEND 185 +#define PREHEAT_1_TEMP_BED 45 #define PREHEAT_1_TEMP_CHAMBER 35 -#define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 +#define PREHEAT_1_FAN_SPEED 255 // Value from 0 to 255 #define PREHEAT_2_LABEL "ABS" #define PREHEAT_2_TEMP_HOTEND 240 -#define PREHEAT_2_TEMP_BED 110 +#define PREHEAT_2_TEMP_BED 70 #define PREHEAT_2_TEMP_CHAMBER 35 -#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 +#define PREHEAT_2_FAN_SPEED 255 // Value from 0 to 255 /** * Nozzle Park @@ -1936,7 +1939,7 @@ * SD Card support is disabled by default. If your controller has an SD slot, * you must uncomment the following option or it won't work. */ -//#define SDSUPPORT +#define SDSUPPORT /** * SD CARD: ENABLE CRC @@ -2014,7 +2017,7 @@ // If you have a speaker that can produce tones, enable it here. // By default Marlin assumes you have a buzzer with a fixed frequency. // -//#define SPEAKER +#define SPEAKER // // The duration and frequency for the UI feedback sound. @@ -2287,7 +2290,10 @@ // This is RAMPS-compatible using a single 10-pin connector. // (For CR-10 owners who want to replace the Melzi Creality board but retain the display) // -//#define CR10_STOCKDISPLAY +#define CR10_STOCKDISPLAY +#if ENABLED(CR10_STOCKDISPLAY) + #define RET6_12864_LCD // Specific to the SoC (can either be RET / VET) +#endif // // Ender-2 OEM display, a variant of the MKS_MINI_12864 diff --git a/config/examples/Creality/Ender-3 Pro/CrealityV427/Configuration_adv.h b/config/examples/Creality/Ender-3 Pro/CrealityV427/Configuration_adv.h index 5335fa012a..0aba06fcd0 100644 --- a/config/examples/Creality/Ender-3 Pro/CrealityV427/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 Pro/CrealityV427/Configuration_adv.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Creality/Ender-3 Pro/CrealityV427" + /** * Configuration_adv.h * @@ -741,7 +743,7 @@ //#define HOMING_BACKOFF_POST_MM { 2, 2, 2 } // (mm) Backoff from endstops after homing -//#define QUICK_HOME // If G28 contains XY do a diagonal move first +#define QUICK_HOME // If G28 contains XY do a diagonal move first //#define HOME_Y_BEFORE_X // If G28 contains XY home Y before X //#define HOME_Z_FIRST // Home Z first. Requires a Z-MIN endstop (not a probe). //#define CODEPENDENT_XY_HOMING // If X/Y can't home without homing Y/X first @@ -792,7 +794,7 @@ * differs, a mode set eeprom write will be completed at initialization. * Use the option below to force an eeprom write to a V3.1 probe regardless. */ - //#define BLTOUCH_SET_5V_MODE + #define BLTOUCH_SET_5V_MODE /** * Safety: Activate if connecting a probe with an unknown voltage mode. @@ -1175,7 +1177,7 @@ #endif // Include a page of printer information in the LCD Main Menu - //#define LCD_INFO_MENU + #define LCD_INFO_MENU #if ENABLED(LCD_INFO_MENU) //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages #endif @@ -1229,7 +1231,7 @@ #endif // Scroll a longer status message into view - //#define STATUS_MESSAGE_SCROLLING + #define STATUS_MESSAGE_SCROLLING // On the Info Screen, display XY with one decimal place when possible //#define LCD_DECIMAL_SMALL_XY @@ -1384,7 +1386,7 @@ //#define LONG_FILENAME_HOST_SUPPORT // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES + #define SCROLL_LONG_FILENAMES // Leave the heaters on after Stop Print (not recommended!) //#define SD_ABORT_NO_COOLDOWN @@ -1790,7 +1792,7 @@ * * Warning: Does not respect endstops! */ -//#define BABYSTEPPING +#define BABYSTEPPING #if ENABLED(BABYSTEPPING) //#define INTEGRATED_BABYSTEPPING // EXPERIMENTAL integration of babystepping into the Stepper ISR //#define BABYSTEP_WITHOUT_HOMING @@ -1801,7 +1803,7 @@ #define BABYSTEP_MULTIPLICATOR_Z 1 // (steps or mm) Steps or millimeter distance for each Z babystep #define BABYSTEP_MULTIPLICATOR_XY 1 // (steps or mm) Steps or millimeter distance for each XY babystep - //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. + #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. // Note: Extra time may be added to mitigate controller latency. @@ -2493,7 +2495,7 @@ #define INTERPOLATE true #if AXIS_IS_TMC(X) - #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. + #define X_CURRENT 580 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for sensorless homing #define X_MICROSTEPS 16 // 0..256 #define X_RSENSE 0.11 @@ -2511,7 +2513,7 @@ #endif #if AXIS_IS_TMC(Y) - #define Y_CURRENT 800 + #define Y_CURRENT 580 #define Y_CURRENT_HOME Y_CURRENT #define Y_MICROSTEPS 16 #define Y_RSENSE 0.11 @@ -2529,7 +2531,7 @@ #endif #if AXIS_IS_TMC(Z) - #define Z_CURRENT 800 + #define Z_CURRENT 580 #define Z_CURRENT_HOME Z_CURRENT #define Z_MICROSTEPS 16 #define Z_RSENSE 0.11 @@ -2565,7 +2567,7 @@ #endif #if AXIS_IS_TMC(E0) - #define E0_CURRENT 800 + #define E0_CURRENT 650 #define E0_MICROSTEPS 16 #define E0_RSENSE 0.11 #define E0_CHAIN_POS -1 @@ -2719,7 +2721,7 @@ * Define your own with: * { , , hysteresis_start[1..8] } */ - #define CHOPPER_TIMING CHOPPER_DEFAULT_12V // All axes (override below) + #define CHOPPER_TIMING CHOPPER_DEFAULT_24V // All axes (override below) //#define CHOPPER_TIMING_X CHOPPER_TIMING // For X Axes (override below) //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X //#define CHOPPER_TIMING_Y CHOPPER_TIMING // For Y Axes (override below) diff --git a/config/examples/Creality/Ender-3 V2/Configuration.h b/config/examples/Creality/Ender-3 V2/Configuration.h index 78c2dc9160..c65a57c235 100644 --- a/config/examples/Creality/Ender-3 V2/Configuration.h +++ b/config/examples/Creality/Ender-3 V2/Configuration.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Creality/Ender-3 V2" + /** * Configuration.h * @@ -102,7 +104,7 @@ * * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] */ -#define SERIAL_PORT 0 +#define SERIAL_PORT 1 /** * Select a secondary serial port on the board to use for communication with the host. @@ -127,18 +129,18 @@ * * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ -#define BAUDRATE 250000 +#define BAUDRATE 115200 // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH // Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_RAMPS_14_EFB + #define MOTHERBOARD BOARD_CREALITY_V4 #endif // Name displayed in the LCD "Ready" message and Info menu -//#define CUSTOM_MACHINE_NAME "3D Printer" +#define CUSTOM_MACHINE_NAME "Ender-3 V2" // Printer's unique ID, used by some programs to differentiate between machines. // Choose your own or use a service like https://www.uuidgenerator.net/version4 @@ -424,7 +426,7 @@ #define TEMP_SENSOR_5 0 #define TEMP_SENSOR_6 0 #define TEMP_SENSOR_7 0 -#define TEMP_SENSOR_BED 0 +#define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 #define TEMP_SENSOR_COOLER 0 @@ -458,7 +460,7 @@ // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. -#define HEATER_0_MINTEMP 5 +#define HEATER_0_MINTEMP 0 #define HEATER_1_MINTEMP 5 #define HEATER_2_MINTEMP 5 #define HEATER_3_MINTEMP 5 @@ -466,7 +468,7 @@ #define HEATER_5_MINTEMP 5 #define HEATER_6_MINTEMP 5 #define HEATER_7_MINTEMP 5 -#define BED_MINTEMP 5 +#define BED_MINTEMP 0 #define CHAMBER_MINTEMP 5 // Above this temperature the heater will be switched off. @@ -480,7 +482,7 @@ #define HEATER_5_MAXTEMP 275 #define HEATER_6_MAXTEMP 275 #define HEATER_7_MAXTEMP 275 -#define BED_MAXTEMP 150 +#define BED_MAXTEMP 120 #define CHAMBER_MAXTEMP 60 /** @@ -513,13 +515,14 @@ #if ENABLED(PID_PARAMS_PER_HOTEND) // Specify between 1 and HOTENDS values per array. // If fewer than EXTRUDER values are provided, the last element will be repeated. - #define DEFAULT_Kp_LIST { 22.20, 22.20 } - #define DEFAULT_Ki_LIST { 1.08, 1.08 } - #define DEFAULT_Kd_LIST { 114.00, 114.00 } + #define DEFAULT_Kp_LIST { 28.72, 28.72 } + #define DEFAULT_Ki_LIST { 2.62, 2.62 } + #define DEFAULT_Kd_LIST { 78.81, 78.81 } #else - #define DEFAULT_Kp 22.20 - #define DEFAULT_Ki 1.08 - #define DEFAULT_Kd 114.00 + // Ender 3 v2 + #define DEFAULT_Kp 28.72 + #define DEFAULT_Ki 2.62 + #define DEFAULT_Kd 78.81 #endif #endif // PIDTEMP @@ -540,7 +543,7 @@ * heater. If your configuration is significantly different than this and you don't understand * the issues involved, don't use bed PID until someone else verifies that your hardware works. */ -//#define PIDTEMPBED +#define PIDTEMPBED //#define BED_LIMIT_SWITCHING @@ -556,11 +559,10 @@ //#define MIN_BED_POWER 0 //#define PID_BED_DEBUG // Sends debug data to the serial port. - // 120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - // from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) - #define DEFAULT_bedKp 10.00 - #define DEFAULT_bedKi .023 - #define DEFAULT_bedKd 305.4 + // Ender 3 V2 + #define DEFAULT_bedKp 462.10 + #define DEFAULT_bedKi 85.47 + #define DEFAULT_bedKd 624.59 // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. #endif // PIDTEMPBED @@ -627,14 +629,14 @@ * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** */ #define PREVENT_COLD_EXTRUSION -#define EXTRUDE_MINTEMP 170 +#define EXTRUDE_MINTEMP 180 /** * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. * Note: For Bowden Extruders make this large enough to allow load/unload. */ #define PREVENT_LENGTHY_EXTRUDE -#define EXTRUDE_MAXLENGTH 200 +#define EXTRUDE_MAXLENGTH 1000 //=========================================================================== //======================== Thermal Runaway Protection ======================= @@ -655,7 +657,7 @@ #define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders #define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed -#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber +//#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber #define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling //=========================================================================== @@ -743,15 +745,15 @@ * TMC5130, TMC5130_STANDALONE, TMC5160, TMC5160_STANDALONE * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'L6474', 'POWERSTEP01', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2160', 'TMC2160_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC2209', 'TMC2209_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE', 'TMC5160', 'TMC5160_STANDALONE'] */ -#define X_DRIVER_TYPE A4988 -#define Y_DRIVER_TYPE A4988 -#define Z_DRIVER_TYPE A4988 +#define X_DRIVER_TYPE TMC2208_STANDALONE +#define Y_DRIVER_TYPE TMC2208_STANDALONE +#define Z_DRIVER_TYPE TMC2208_STANDALONE //#define X2_DRIVER_TYPE A4988 //#define Y2_DRIVER_TYPE A4988 //#define Z2_DRIVER_TYPE A4988 //#define Z3_DRIVER_TYPE A4988 //#define Z4_DRIVER_TYPE A4988 -#define E0_DRIVER_TYPE A4988 +#define E0_DRIVER_TYPE TMC2208_STANDALONE //#define E1_DRIVER_TYPE A4988 //#define E2_DRIVER_TYPE A4988 //#define E3_DRIVER_TYPE A4988 @@ -762,7 +764,7 @@ // Enable this feature if all enabled endstop pins are interrupt-capable. // This will remove the need to poll the interrupt pins, saving many CPU cycles. -//#define ENDSTOP_INTERRUPTS_FEATURE +#define ENDSTOP_INTERRUPTS_FEATURE /** * Endstop Noise Threshold @@ -806,14 +808,14 @@ * Override with M92 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 500 } +#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 93 } /** * Default Max Feed Rate (mm/s) * Override with M203 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 } +#define DEFAULT_MAX_FEEDRATE { 500, 500, 5, 25 } //#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 #if ENABLED(LIMITED_MAX_FR_EDITING) @@ -826,7 +828,7 @@ * Override with M201 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 } +#define DEFAULT_MAX_ACCELERATION { 500, 500, 100, 1000 } //#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 #if ENABLED(LIMITED_MAX_ACCEL_EDITING) @@ -841,9 +843,9 @@ * M204 R Retract Acceleration * M204 T Travel Acceleration */ -#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves +#define DEFAULT_ACCELERATION 500 // X, Y, Z and E acceleration for printing moves +#define DEFAULT_RETRACT_ACCELERATION 500 // E acceleration for retracts +#define DEFAULT_TRAVEL_ACCELERATION 1000 // X, Y, Z acceleration for travel (non printing) moves /** * Default Jerk limits (mm/s) @@ -853,7 +855,7 @@ * When changing speed and direction, if the difference is less than the * value set here, it may happen instantaneously. */ -//#define CLASSIC_JERK +#define CLASSIC_JERK #if ENABLED(CLASSIC_JERK) #define DEFAULT_XJERK 10.0 #define DEFAULT_YJERK 10.0 @@ -1062,7 +1064,7 @@ #define PROBING_MARGIN 10 // X and Y axis travel speed (mm/min) between probes -#define XY_PROBE_FEEDRATE (133*60) +#define XY_PROBE_FEEDRATE (50*60) // Feedrate (mm/min) for the first approach when double-probing (MULTIPLE_PROBING == 2) #define Z_PROBE_FEEDRATE_FAST (4*60) @@ -1131,8 +1133,8 @@ #define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping // For M851 give a range for adjusting the Z probe offset -#define Z_PROBE_OFFSET_RANGE_MIN -20 -#define Z_PROBE_OFFSET_RANGE_MAX 20 +#define Z_PROBE_OFFSET_RANGE_MIN -10 +#define Z_PROBE_OFFSET_RANGE_MAX 10 // Enable the M48 repeatability test to test probe accuracy //#define Z_MIN_PROBE_REPEATABILITY_TEST @@ -1191,8 +1193,8 @@ // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR false -#define INVERT_Y_DIR true -#define INVERT_Z_DIR false +#define INVERT_Y_DIR false +#define INVERT_Z_DIR true // @section extruder @@ -1232,8 +1234,8 @@ // @section machine // The size of the printable area -#define X_BED_SIZE 200 -#define Y_BED_SIZE 200 +#define X_BED_SIZE 220 +#define Y_BED_SIZE 220 // Travel limits (mm) after homing, corresponding to endstop positions. #define X_MIN_POS 0 @@ -1241,7 +1243,7 @@ #define Z_MIN_POS 0 #define X_MAX_POS X_BED_SIZE #define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 200 +#define Z_MAX_POS 250 /** * Software Endstops @@ -1464,7 +1466,7 @@ // Beyond the probed grid, continue the implied tilt? // Default is to maintain the height of the nearest edge. - //#define EXTRAPOLATE_BEYOND_GRID + #define EXTRAPOLATE_BEYOND_GRID // // Experimental Subdivision of the grid by Catmull-Rom method. @@ -1590,8 +1592,8 @@ //#define Z_SAFE_HOMING #if ENABLED(Z_SAFE_HOMING) - #define Z_SAFE_HOMING_X_POINT X_CENTER // X point for Z homing - #define Z_SAFE_HOMING_Y_POINT Y_CENTER // Y point for Z homing + #define Z_SAFE_HOMING_X_POINT ((X_BED_SIZE - 10) / 2) // X point for Z homing + #define Z_SAFE_HOMING_Y_POINT ((Y_BED_SIZE - 10) / 2) // Y point for Z homing #endif // Homing speeds (mm/min) @@ -1672,12 +1674,12 @@ * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) */ -//#define EEPROM_SETTINGS // Persistent storage with M500 and M501 +#define EEPROM_SETTINGS // Persistent storage with M500 and M501 //#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! -#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. +//#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. #define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load #if ENABLED(EEPROM_SETTINGS) - //#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. + #define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. #endif // @@ -1706,16 +1708,16 @@ // Preheat Constants - Up to 5 are supported without changes // #define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 180 -#define PREHEAT_1_TEMP_BED 70 +#define PREHEAT_1_TEMP_HOTEND 185 +#define PREHEAT_1_TEMP_BED 45 #define PREHEAT_1_TEMP_CHAMBER 35 -#define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 +#define PREHEAT_1_FAN_SPEED 255 // Value from 0 to 255 #define PREHEAT_2_LABEL "ABS" #define PREHEAT_2_TEMP_HOTEND 240 -#define PREHEAT_2_TEMP_BED 110 +#define PREHEAT_2_TEMP_BED 70 #define PREHEAT_2_TEMP_CHAMBER 35 -#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 +#define PREHEAT_2_FAN_SPEED 255 // Value from 0 to 255 /** * Nozzle Park @@ -1936,7 +1938,7 @@ * SD Card support is disabled by default. If your controller has an SD slot, * you must uncomment the following option or it won't work. */ -//#define SDSUPPORT +#define SDSUPPORT /** * SD CARD: ENABLE CRC @@ -1960,13 +1962,13 @@ // This option overrides the default number of encoder pulses needed to // produce one step. Should be increased for high-resolution encoders. // -//#define ENCODER_PULSES_PER_STEP 4 +#define ENCODER_PULSES_PER_STEP 4 // // Use this option to override the number of step signals required to // move between next/prev menu items. // -//#define ENCODER_STEPS_PER_MENU_ITEM 1 +#define ENCODER_STEPS_PER_MENU_ITEM 1 /** * Encoder Direction Options @@ -2023,8 +2025,8 @@ // Note: Test audio output with the G-Code: // M300 S P // -//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 -//#define LCD_FEEDBACK_FREQUENCY_HZ 5000 +#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 +#define LCD_FEEDBACK_FREQUENCY_HZ 5000 //============================================================================= //======================== LCD / Controller Selection ========================= @@ -2568,7 +2570,7 @@ // // Ender-3 v2 OEM display. A DWIN display with Rotary Encoder. // -//#define DWIN_CREALITY_LCD +#define DWIN_CREALITY_LCD // // Touch Screen Settings @@ -2684,11 +2686,11 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - #define NEOPIXEL_PIN 4 // LED driving pin + #define NEOPIXEL_TYPE NEO_GRB // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + #define NEOPIXEL_PIN PB2 // LED driving pin //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_PIXELS 4 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup diff --git a/config/examples/Creality/Ender-3 V2/Configuration_adv.h b/config/examples/Creality/Ender-3 V2/Configuration_adv.h index 5335fa012a..c2429540a1 100644 --- a/config/examples/Creality/Ender-3 V2/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 V2/Configuration_adv.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Creality/Ender-3 V2" + /** * Configuration_adv.h * @@ -258,7 +260,7 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 20 // Seconds + #define WATCH_TEMP_PERIOD 40 // Seconds #define WATCH_TEMP_INCREASE 2 // Degrees Celsius #endif @@ -266,13 +268,13 @@ * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_BED_PERIOD 180 // Seconds #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds + #define WATCH_BED_TEMP_PERIOD 180 // Seconds #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius #endif @@ -496,7 +498,7 @@ * * Define one or both of these to override the default 0-255 range. */ -//#define FAN_MIN_PWM 50 +#define FAN_MIN_PWM 50 //#define FAN_MAX_PWM 128 /** @@ -741,7 +743,7 @@ //#define HOMING_BACKOFF_POST_MM { 2, 2, 2 } // (mm) Backoff from endstops after homing -//#define QUICK_HOME // If G28 contains XY do a diagonal move first +#define QUICK_HOME // If G28 contains XY do a diagonal move first //#define HOME_Y_BEFORE_X // If G28 contains XY home Y before X //#define HOME_Z_FIRST // Home Z first. Requires a Z-MIN endstop (not a probe). //#define CODEPENDENT_XY_HOMING // If X/Y can't home without homing Y/X first @@ -1059,7 +1061,7 @@ * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the * lowest stepping frequencies. */ -//#define ADAPTIVE_STEP_SMOOTHING +#define ADAPTIVE_STEP_SMOOTHING /** * Custom Microstepping @@ -1145,8 +1147,9 @@ // Change values more rapidly when the encoder is rotated faster #define ENCODER_RATE_MULTIPLIER #if ENABLED(ENCODER_RATE_MULTIPLIER) - #define ENCODER_10X_STEPS_PER_SEC 30 // (steps/s) Encoder rate for 10x speed - #define ENCODER_100X_STEPS_PER_SEC 80 // (steps/s) Encoder rate for 100x speed + #define ENCODER_5X_STEPS_PER_SEC 30 + #define ENCODER_10X_STEPS_PER_SEC 80 // (steps/s) Encoder rate for 10x speed + #define ENCODER_100X_STEPS_PER_SEC 130 // (steps/s) Encoder rate for 100x speed #endif // Play a beep when the feedrate is changed from the Status Screen @@ -1315,7 +1318,7 @@ * an option on the LCD screen to continue the print from the last-known * point in the file. */ - //#define POWER_LOSS_RECOVERY + #define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) //#define BACKUP_POWER_SUPPLY // Backup power / UPS to move the steppers on power loss @@ -1361,17 +1364,17 @@ * - SDSORT_CACHE_NAMES will retain the sorted file listing in RAM. (Expensive!) * - SDSORT_DYNAMIC_RAM only uses RAM when the SD menu is visible. (Use with caution!) */ - //#define SDCARD_SORT_ALPHA + #define SDCARD_SORT_ALPHA // SD Card Sorting options #if ENABLED(SDCARD_SORT_ALPHA) #define SDSORT_LIMIT 40 // Maximum number of sorted items (10-256). Costs 27 bytes each. #define FOLDER_SORTING -1 // -1=above 0=none 1=below #define SDSORT_GCODE false // Allow turning sorting on/off with LCD and M34 G-code. - #define SDSORT_USES_RAM false // Pre-allocate a static array for faster pre-sorting. + #define SDSORT_USES_RAM true // Pre-allocate a static array for faster pre-sorting. #define SDSORT_USES_STACK false // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.) - #define SDSORT_CACHE_NAMES false // Keep sorted items in RAM longer for speedy performance. Most expensive option. - #define SDSORT_DYNAMIC_RAM false // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use! + #define SDSORT_CACHE_NAMES true // Keep sorted items in RAM longer for speedy performance. Most expensive option. + #define SDSORT_DYNAMIC_RAM true // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use! #define SDSORT_CACHE_VFATS 2 // Maximum number of 13-byte VFAT entries to use for sorting. // Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM. #endif @@ -1496,7 +1499,7 @@ * By default an onboard SD card reader may be shared as a USB mass- * storage device. This option hides the SD card from the host PC. */ -//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security). +#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security). /** * Additional options for Graphical Displays @@ -1790,7 +1793,7 @@ * * Warning: Does not respect endstops! */ -//#define BABYSTEPPING +#define BABYSTEPPING #if ENABLED(BABYSTEPPING) //#define INTEGRATED_BABYSTEPPING // EXPERIMENTAL integration of babystepping into the Stepper ISR //#define BABYSTEP_WITHOUT_HOMING @@ -2839,7 +2842,7 @@ * Beta feature! * Create a 50/50 square wave step pulse optimal for stepper drivers. */ - //#define SQUARE_WAVE_STEPPING + #define SQUARE_WAVE_STEPPING /** * Enable M122 debugging command for TMC stepper drivers. diff --git a/config/examples/Creality/Ender-3/BigTreeTech E3 RRF/Configuration.h b/config/examples/Creality/Ender-3/BigTreeTech E3 RRF/Configuration.h index 78c2dc9160..b73a6d8be7 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech E3 RRF/Configuration.h +++ b/config/examples/Creality/Ender-3/BigTreeTech E3 RRF/Configuration.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Creality/Ender-3/BigTreeTech E3 RRF" + /** * Configuration.h * @@ -69,7 +71,7 @@ // @section info // Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes. +#define STRING_CONFIG_H_AUTHOR "(BIGTREETECH, BTT-E3-RRF)" // Who made the changes. //#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) /** @@ -102,14 +104,14 @@ * * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] */ -#define SERIAL_PORT 0 +#define SERIAL_PORT 1 /** * Select a secondary serial port on the board to use for communication with the host. * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] */ -//#define SERIAL_PORT_2 -1 +#define SERIAL_PORT_2 -1 /** * Select a third serial port on the board to use for communication with the host. @@ -127,18 +129,18 @@ * * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ -#define BAUDRATE 250000 +#define BAUDRATE 115200 // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH // Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_RAMPS_14_EFB + #define MOTHERBOARD BOARD_BTT_E3_RRF #endif // Name displayed in the LCD "Ready" message and Info menu -//#define CUSTOM_MACHINE_NAME "3D Printer" +#define CUSTOM_MACHINE_NAME "Ender-3" // Printer's unique ID, used by some programs to differentiate between machines. // Choose your own or use a service like https://www.uuidgenerator.net/version4 @@ -424,7 +426,7 @@ #define TEMP_SENSOR_5 0 #define TEMP_SENSOR_6 0 #define TEMP_SENSOR_7 0 -#define TEMP_SENSOR_BED 0 +#define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 #define TEMP_SENSOR_COOLER 0 @@ -480,7 +482,7 @@ #define HEATER_5_MAXTEMP 275 #define HEATER_6_MAXTEMP 275 #define HEATER_7_MAXTEMP 275 -#define BED_MAXTEMP 150 +#define BED_MAXTEMP 125 #define CHAMBER_MAXTEMP 60 /** @@ -510,16 +512,17 @@ //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) // Set/get with gcode: M301 E[extruder number, 0-2] + // Creality Ender-3 #if ENABLED(PID_PARAMS_PER_HOTEND) // Specify between 1 and HOTENDS values per array. // If fewer than EXTRUDER values are provided, the last element will be repeated. - #define DEFAULT_Kp_LIST { 22.20, 22.20 } - #define DEFAULT_Ki_LIST { 1.08, 1.08 } - #define DEFAULT_Kd_LIST { 114.00, 114.00 } + #define DEFAULT_Kp_LIST { 21.73, 21.73 } + #define DEFAULT_Ki_LIST { 1.54, 1.54 } + #define DEFAULT_Kd_LIST { 76.55, 76.55 } #else - #define DEFAULT_Kp 22.20 - #define DEFAULT_Ki 1.08 - #define DEFAULT_Kd 114.00 + #define DEFAULT_Kp 21.73 + #define DEFAULT_Ki 1.54 + #define DEFAULT_Kd 76.55 #endif #endif // PIDTEMP @@ -556,11 +559,9 @@ //#define MIN_BED_POWER 0 //#define PID_BED_DEBUG // Sends debug data to the serial port. - // 120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - // from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) - #define DEFAULT_bedKp 10.00 - #define DEFAULT_bedKi .023 - #define DEFAULT_bedKd 305.4 + #define DEFAULT_bedKp 50.71 + #define DEFAULT_bedKi 9.88 + #define DEFAULT_bedKd 173.43 // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. #endif // PIDTEMPBED @@ -634,7 +635,7 @@ * Note: For Bowden Extruders make this large enough to allow load/unload. */ #define PREVENT_LENGTHY_EXTRUDE -#define EXTRUDE_MAXLENGTH 200 +#define EXTRUDE_MAXLENGTH 600 //=========================================================================== //======================== Thermal Runaway Protection ======================= @@ -743,16 +744,16 @@ * TMC5130, TMC5130_STANDALONE, TMC5160, TMC5160_STANDALONE * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'L6474', 'POWERSTEP01', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2160', 'TMC2160_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC2209', 'TMC2209_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE', 'TMC5160', 'TMC5160_STANDALONE'] */ -#define X_DRIVER_TYPE A4988 -#define Y_DRIVER_TYPE A4988 -#define Z_DRIVER_TYPE A4988 -//#define X2_DRIVER_TYPE A4988 +#define X_DRIVER_TYPE TMC2209 +#define Y_DRIVER_TYPE TMC2209 +#define Z_DRIVER_TYPE TMC2209 +//#define X2_DRIVER_TYPE TMC2209 //#define Y2_DRIVER_TYPE A4988 //#define Z2_DRIVER_TYPE A4988 //#define Z3_DRIVER_TYPE A4988 //#define Z4_DRIVER_TYPE A4988 -#define E0_DRIVER_TYPE A4988 -//#define E1_DRIVER_TYPE A4988 +#define E0_DRIVER_TYPE TMC2209 +//#define E1_DRIVER_TYPE TMC2209 //#define E2_DRIVER_TYPE A4988 //#define E3_DRIVER_TYPE A4988 //#define E4_DRIVER_TYPE A4988 @@ -806,14 +807,14 @@ * Override with M92 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 500 } +#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 93 } /** * Default Max Feed Rate (mm/s) * Override with M203 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 } +#define DEFAULT_MAX_FEEDRATE { 200, 200, 5, 25 } //#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 #if ENABLED(LIMITED_MAX_FR_EDITING) @@ -826,7 +827,7 @@ * Override with M201 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 } +#define DEFAULT_MAX_ACCELERATION { 1000, 1000, 100, 5000 } //#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 #if ENABLED(LIMITED_MAX_ACCEL_EDITING) @@ -841,9 +842,9 @@ * M204 R Retract Acceleration * M204 T Travel Acceleration */ -#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves +#define DEFAULT_ACCELERATION 500 // X, Y, Z and E acceleration for printing moves +#define DEFAULT_RETRACT_ACCELERATION 500 // E acceleration for retracts +#define DEFAULT_TRAVEL_ACCELERATION 500 // X, Y, Z acceleration for travel (non printing) moves /** * Default Jerk limits (mm/s) @@ -877,7 +878,7 @@ * https://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html */ #if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.013 // (mm) Distance from real junction edge + #define JUNCTION_DEVIATION_MM 0.08 // (mm) Distance from real junction edge #define JD_HANDLE_SMALL_SEGMENTS // Use curvature estimation instead of just the junction angle // for small segments (< 1mm) with large junction angles (> 135°). #endif @@ -890,7 +891,7 @@ * * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained */ -//#define S_CURVE_ACCELERATION +#define S_CURVE_ACCELERATION //=========================================================================== //============================= Z Probe Options ============================= @@ -906,7 +907,7 @@ * The probe replaces the Z-MIN endstop and is used for Z homing. * (Automatically enables USE_PROBE_FOR_Z_HOMING.) */ -#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN +//#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN // Force the use of the probe for Z-axis homing //#define USE_PROBE_FOR_Z_HOMING @@ -1055,7 +1056,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +#define NOZZLE_TO_PROBE_OFFSET { -40, -10, -1.85 } // Most probes should stay away from the edges of the bed, but // with NOZZLE_AS_PROBE this can be negative for a wider probing area. @@ -1190,15 +1191,15 @@ // @section machine // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR false +#define INVERT_X_DIR true #define INVERT_Y_DIR true #define INVERT_Z_DIR false // @section extruder // For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR false -#define INVERT_E1_DIR false +#define INVERT_E0_DIR true +#define INVERT_E1_DIR true #define INVERT_E2_DIR false #define INVERT_E3_DIR false #define INVERT_E4_DIR false @@ -1232,8 +1233,8 @@ // @section machine // The size of the printable area -#define X_BED_SIZE 200 -#define Y_BED_SIZE 200 +#define X_BED_SIZE 235 +#define Y_BED_SIZE 235 // Travel limits (mm) after homing, corresponding to endstop positions. #define X_MIN_POS 0 @@ -1241,7 +1242,7 @@ #define Z_MIN_POS 0 #define X_MAX_POS X_BED_SIZE #define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 200 +#define Z_MAX_POS 250 /** * Software Endstops @@ -1389,14 +1390,14 @@ //#define AUTO_BED_LEVELING_LINEAR //#define AUTO_BED_LEVELING_BILINEAR //#define AUTO_BED_LEVELING_UBL -//#define MESH_BED_LEVELING +#define MESH_BED_LEVELING /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable * leveling immediately after G28. */ -//#define RESTORE_LEVELING_AFTER_G28 +#define RESTORE_LEVELING_AFTER_G28 //#define ENABLE_LEVELING_AFTER_G28 /** @@ -1454,7 +1455,7 @@ #if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR) // Set the number of grid points per dimension. - #define GRID_MAX_POINTS_X 3 + #define GRID_MAX_POINTS_X 5 #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X // Probe along the Y axis, advancing X after each column @@ -1464,7 +1465,7 @@ // Beyond the probed grid, continue the implied tilt? // Default is to maintain the height of the nearest edge. - //#define EXTRAPOLATE_BEYOND_GRID + #define EXTRAPOLATE_BEYOND_GRID // // Experimental Subdivision of the grid by Catmull-Rom method. @@ -1518,16 +1519,16 @@ * Add a bed leveling sub-menu for ABL or MBL. * Include a guided procedure if manual probing is enabled. */ -//#define LCD_BED_LEVELING +#define LCD_BED_LEVELING #if ENABLED(LCD_BED_LEVELING) #define MESH_EDIT_Z_STEP 0.025 // (mm) Step size while manually probing Z axis. #define LCD_PROBE_Z_RANGE 4 // (mm) Z Range centered on Z_MIN_POS for LCD Z adjustment - //#define MESH_EDIT_MENU // Add a menu to edit mesh points + #define MESH_EDIT_MENU // Add a menu to edit mesh points #endif // Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS +#define LEVEL_BED_CORNERS #if ENABLED(LEVEL_BED_CORNERS) #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets @@ -1595,7 +1596,7 @@ #endif // Homing speeds (mm/min) -#define HOMING_FEEDRATE_MM_M { (50*60), (50*60), (4*60) } +#define HOMING_FEEDRATE_MM_M { (20*60), (20*60), (4*60) } // Validate that endstops are triggered on homing moves #define VALIDATE_HOMING_ENDSTOPS @@ -1672,12 +1673,12 @@ * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) */ -//#define EEPROM_SETTINGS // Persistent storage with M500 and M501 +#define EEPROM_SETTINGS // Persistent storage with M500 and M501 //#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. #define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load #if ENABLED(EEPROM_SETTINGS) - //#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. + #define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. #endif // @@ -1706,16 +1707,16 @@ // Preheat Constants - Up to 5 are supported without changes // #define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 180 -#define PREHEAT_1_TEMP_BED 70 +#define PREHEAT_1_TEMP_HOTEND 185 +#define PREHEAT_1_TEMP_BED 45 #define PREHEAT_1_TEMP_CHAMBER 35 -#define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 +#define PREHEAT_1_FAN_SPEED 255 // Value from 0 to 255 #define PREHEAT_2_LABEL "ABS" #define PREHEAT_2_TEMP_HOTEND 240 #define PREHEAT_2_TEMP_BED 110 #define PREHEAT_2_TEMP_CHAMBER 35 -#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 +#define PREHEAT_2_FAN_SPEED 255 // Value from 0 to 255 /** * Nozzle Park @@ -1728,7 +1729,7 @@ * P1 Raise the nozzle always to Z-park height. * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. */ -//#define NOZZLE_PARK_FEATURE +#define NOZZLE_PARK_FEATURE #if ENABLED(NOZZLE_PARK_FEATURE) // Specify a park position as { X, Y, Z_raise } @@ -1936,7 +1937,7 @@ * SD Card support is disabled by default. If your controller has an SD slot, * you must uncomment the following option or it won't work. */ -//#define SDSUPPORT +#define SDSUPPORT /** * SD CARD: ENABLE CRC @@ -2006,7 +2007,7 @@ // // Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. // -//#define INDIVIDUAL_AXIS_HOMING_MENU +#define INDIVIDUAL_AXIS_HOMING_MENU // // SPEAKER/BUZZER @@ -2014,7 +2015,7 @@ // If you have a speaker that can produce tones, enable it here. // By default Marlin assumes you have a buzzer with a fixed frequency. // -//#define SPEAKER +#define SPEAKER // // The duration and frequency for the UI feedback sound. @@ -2023,8 +2024,8 @@ // Note: Test audio output with the G-Code: // M300 S P // -//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 -//#define LCD_FEEDBACK_FREQUENCY_HZ 5000 +#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 20 +#define LCD_FEEDBACK_FREQUENCY_HZ 1000 //============================================================================= //======================== LCD / Controller Selection ========================= @@ -2287,7 +2288,7 @@ // This is RAMPS-compatible using a single 10-pin connector. // (For CR-10 owners who want to replace the Melzi Creality board but retain the display) // -//#define CR10_STOCKDISPLAY +#define CR10_STOCKDISPLAY // // Ender-2 OEM display, a variant of the MKS_MINI_12864 diff --git a/config/examples/Creality/Ender-3/BigTreeTech E3 RRF/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech E3 RRF/Configuration_adv.h index 5335fa012a..a7b3bf6b81 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech E3 RRF/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech E3 RRF/Configuration_adv.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Creality/Ender-3/BigTreeTech E3 RRF" + /** * Configuration_adv.h * @@ -461,7 +463,7 @@ * The fan turns on automatically whenever any driver is enabled and turns * off (or reduces to idle speed) shortly after drivers are turned off. */ -//#define USE_CONTROLLER_FAN +#define USE_CONTROLLER_FAN #if ENABLED(USE_CONTROLLER_FAN) //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan //#define CONTROLLER_FAN_USE_Z_ONLY // With this option only the Z axis is considered @@ -470,7 +472,7 @@ #define CONTROLLERFAN_SPEED_ACTIVE 255 // (0-255) Active speed, used when any motor is enabled #define CONTROLLERFAN_SPEED_IDLE 0 // (0-255) Idle speed, used when motors are disabled #define CONTROLLERFAN_IDLE_TIME 60 // (seconds) Extra time to keep the fan running after disabling motors - //#define CONTROLLER_FAN_EDITABLE // Enable M710 configurable settings + #define CONTROLLER_FAN_EDITABLE // Enable M710 configurable settings #if ENABLED(CONTROLLER_FAN_EDITABLE) #define CONTROLLER_FAN_MENU // Enable the Controller Fan submenu #endif @@ -702,9 +704,9 @@ //#define DUAL_X_CARRIAGE #if ENABLED(DUAL_X_CARRIAGE) #define X1_MIN_POS X_MIN_POS // Set to X_MIN_POS - #define X1_MAX_POS X_BED_SIZE // Set a maximum so the first X-carriage can't hit the parked second X-carriage - #define X2_MIN_POS 80 // Set a minimum to ensure the second X-carriage can't hit the parked first X-carriage - #define X2_MAX_POS 353 // Set this to the distance between toolheads when both heads are homed + #define X1_MAX_POS 170 // Set a maximum so the first X-carriage can't hit the parked second X-carriage + #define X2_MIN_POS 70 // Set a minimum to ensure the second X-carriage can't hit the parked first X-carriage + #define X2_MAX_POS 221.5 // Set this to the distance between toolheads when both heads are homed #define X2_HOME_DIR 1 // Set to 1. The second X-carriage always homes to the maximum endstop position #define X2_HOME_POS X2_MAX_POS // Default X2 home position. Set to X2_MAX_POS. // However: In this mode the HOTEND_OFFSET_X value for the second extruder provides a software @@ -713,7 +715,7 @@ // Remember: you should set the second extruder x-offset to 0 in your slicer. // This is the default power-up mode which can be later using M605. - #define DEFAULT_DUAL_X_CARRIAGE_MODE DXC_AUTO_PARK_MODE + #define DEFAULT_DUAL_X_CARRIAGE_MODE DXC_FULL_CONTROL_MODE // Default x offset in duplication mode (typically set to half print bed width) #define DEFAULT_DUPLICATION_X_OFFSET 100 @@ -741,7 +743,7 @@ //#define HOMING_BACKOFF_POST_MM { 2, 2, 2 } // (mm) Backoff from endstops after homing -//#define QUICK_HOME // If G28 contains XY do a diagonal move first +#define QUICK_HOME // If G28 contains XY do a diagonal move first //#define HOME_Y_BEFORE_X // If G28 contains XY home Y before X //#define HOME_Z_FIRST // Home Z first. Requires a Z-MIN endstop (not a probe). //#define CODEPENDENT_XY_HOMING // If X/Y can't home without homing Y/X first @@ -1175,7 +1177,7 @@ #endif // Include a page of printer information in the LCD Main Menu - //#define LCD_INFO_MENU + #define LCD_INFO_MENU #if ENABLED(LCD_INFO_MENU) //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages #endif @@ -1229,13 +1231,13 @@ #endif // Scroll a longer status message into view - //#define STATUS_MESSAGE_SCROLLING + #define STATUS_MESSAGE_SCROLLING // On the Info Screen, display XY with one decimal place when possible //#define LCD_DECIMAL_SMALL_XY // Add an 'M73' G-code to set the current percentage - //#define LCD_SET_PROGRESS_MANUALLY + #define LCD_SET_PROGRESS_MANUALLY // Show the E position (filament used) during printing //#define LCD_SHOW_E_TOTAL @@ -1315,17 +1317,17 @@ * an option on the LCD screen to continue the print from the last-known * point in the file. */ - //#define POWER_LOSS_RECOVERY + #define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) //#define BACKUP_POWER_SUPPLY // Backup power / UPS to move the steppers on power loss - //#define POWER_LOSS_ZRAISE 2 // (mm) Z axis raise on resume (on power loss with UPS) - //#define POWER_LOSS_PIN 44 // Pin to detect power loss. Set to -1 to disable default pin on boards without module. + #define POWER_LOSS_ZRAISE 2 // (mm) Z axis raise on resume (on power loss with UPS) + #define POWER_LOSS_PIN -1 // Pin to detect power loss. Set to -1 to disable default pin on boards without module. //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss //#define POWER_LOSS_PULLUP // Set pullup / pulldown as appropriate for your sensor //#define POWER_LOSS_PULLDOWN - //#define POWER_LOSS_PURGE_LEN 20 // (mm) Length of filament to purge on resume - //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power. + #define POWER_LOSS_PURGE_LEN 20 // (mm) Length of filament to purge on resume + #define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power. // Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card, // especially with "vase mode" printing. Set too high and vases cannot be continued. @@ -1361,16 +1363,16 @@ * - SDSORT_CACHE_NAMES will retain the sorted file listing in RAM. (Expensive!) * - SDSORT_DYNAMIC_RAM only uses RAM when the SD menu is visible. (Use with caution!) */ - //#define SDCARD_SORT_ALPHA + #define SDCARD_SORT_ALPHA // SD Card Sorting options #if ENABLED(SDCARD_SORT_ALPHA) #define SDSORT_LIMIT 40 // Maximum number of sorted items (10-256). Costs 27 bytes each. #define FOLDER_SORTING -1 // -1=above 0=none 1=below #define SDSORT_GCODE false // Allow turning sorting on/off with LCD and M34 G-code. - #define SDSORT_USES_RAM false // Pre-allocate a static array for faster pre-sorting. + #define SDSORT_USES_RAM true // Pre-allocate a static array for faster pre-sorting. #define SDSORT_USES_STACK false // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.) - #define SDSORT_CACHE_NAMES false // Keep sorted items in RAM longer for speedy performance. Most expensive option. + #define SDSORT_CACHE_NAMES true // Keep sorted items in RAM longer for speedy performance. Most expensive option. #define SDSORT_DYNAMIC_RAM false // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use! #define SDSORT_CACHE_VFATS 2 // Maximum number of 13-byte VFAT entries to use for sorting. // Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM. @@ -1381,10 +1383,10 @@ //#define UTF_FILENAME_SUPPORT // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT + #define LONG_FILENAME_HOST_SUPPORT // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES + #define SCROLL_LONG_FILENAMES // Leave the heaters on after Stop Print (not recommended!) //#define SD_ABORT_NO_COOLDOWN @@ -1476,7 +1478,7 @@ * * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] */ - //#define SDCARD_CONNECTION LCD + #define SDCARD_CONNECTION ONBOARD // Enable if SD detect is rendered useless (e.g., by using an SD extender) //#define NO_SD_DETECT @@ -1790,7 +1792,7 @@ * * Warning: Does not respect endstops! */ -//#define BABYSTEPPING +#define BABYSTEPPING #if ENABLED(BABYSTEPPING) //#define INTEGRATED_BABYSTEPPING // EXPERIMENTAL integration of babystepping into the Stepper ISR //#define BABYSTEP_WITHOUT_HOMING @@ -1801,7 +1803,7 @@ #define BABYSTEP_MULTIPLICATOR_Z 1 // (steps or mm) Steps or millimeter distance for each Z babystep #define BABYSTEP_MULTIPLICATOR_XY 1 // (steps or mm) Steps or millimeter distance for each XY babystep - //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. + #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. // Note: Extra time may be added to mitigate controller latency. @@ -1840,9 +1842,9 @@ //#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) //#define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants - #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed + #define LIN_ADVANCE_K 0.0 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // If enabled, this will generate debug information output over USB. - //#define EXPERIMENTAL_SCURVE // Enable this option to permit S-Curve Acceleration + #define EXPERIMENTAL_SCURVE // Enable this option to permit S-Curve Acceleration #endif // @section leveling @@ -1982,7 +1984,7 @@ // // G2/G3 Arc Support // -#define ARC_SUPPORT // Disable this feature to save ~3226 bytes +//#define ARC_SUPPORT // Disable this feature to save ~3226 bytes #if ENABLED(ARC_SUPPORT) #define MM_PER_ARC_SEGMENT 1 // (mm) Length (or minimum length) of each arc segment //#define ARC_SEGMENTS_PER_R 1 // Max segment length, MM_PER = Min @@ -2141,7 +2143,7 @@ * Currently handles M108, M112, M410, M876 * NOTE: Not yet implemented for all platforms. */ -//#define EMERGENCY_PARSER +#define EMERGENCY_PARSER /** * Realtime Reporting (requires EMERGENCY_PARSER) @@ -2311,14 +2313,14 @@ * * Enable PARK_HEAD_ON_PAUSE to add the G-code M125 Pause and Park. */ -//#define ADVANCED_PAUSE_FEATURE +#define ADVANCED_PAUSE_FEATURE #if ENABLED(ADVANCED_PAUSE_FEATURE) #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. // This short retract is done immediately, before parking the nozzle. #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast. #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload. + #define FILAMENT_CHANGE_UNLOAD_LENGTH 400 // (mm) The length of filament for a complete unload. // For Bowden, the full length of the tube and nozzle. // For direct drive, the full length of the nozzle. // Set to 0 for manual unloading. @@ -2327,7 +2329,7 @@ // 0 to disable start loading and skip to fast load only #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast. #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle. + #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 350 // (mm) Load length of filament, from extruder gear to nozzle. // For Bowden, the full length of the tube and nozzle. // For direct drive, the full length of the nozzle. //#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted. @@ -2349,10 +2351,10 @@ #define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed. #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change. - //#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. - //#define HOME_BEFORE_FILAMENT_CHANGE // If needed, home before parking for filament change + #define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. + #define HOME_BEFORE_FILAMENT_CHANGE // If needed, home before parking for filament change - //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. + #define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) #endif @@ -2493,8 +2495,8 @@ #define INTERPOLATE true #if AXIS_IS_TMC(X) - #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. - #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for sensorless homing + #define X_CURRENT 580 // (mA) RMS current. Multiply by 1.414 for peak current. + #define X_CURRENT_HOME (X_CURRENT/2) // (mA) RMS current for sensorless homing #define X_MICROSTEPS 16 // 0..256 #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... @@ -2511,8 +2513,8 @@ #endif #if AXIS_IS_TMC(Y) - #define Y_CURRENT 800 - #define Y_CURRENT_HOME Y_CURRENT + #define Y_CURRENT 580 + #define Y_CURRENT_HOME (Y_CURRENT/2) #define Y_MICROSTEPS 16 #define Y_RSENSE 0.11 #define Y_CHAIN_POS -1 @@ -2529,7 +2531,7 @@ #endif #if AXIS_IS_TMC(Z) - #define Z_CURRENT 800 + #define Z_CURRENT 580 #define Z_CURRENT_HOME Z_CURRENT #define Z_MICROSTEPS 16 #define Z_RSENSE 0.11 @@ -2565,7 +2567,7 @@ #endif #if AXIS_IS_TMC(E0) - #define E0_CURRENT 800 + #define E0_CURRENT 650 #define E0_MICROSTEPS 16 #define E0_RSENSE 0.11 #define E0_CHAIN_POS -1 @@ -2670,9 +2672,9 @@ * Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers * on the same serial port, either here or in your board's pins file. */ - //#define X_SLAVE_ADDRESS 0 - //#define Y_SLAVE_ADDRESS 0 - //#define Z_SLAVE_ADDRESS 0 + //#define X_SLAVE_ADDRESS 0 + //#define Y_SLAVE_ADDRESS 0 + //#define Z_SLAVE_ADDRESS 0 //#define X2_SLAVE_ADDRESS 0 //#define Y2_SLAVE_ADDRESS 0 //#define Z2_SLAVE_ADDRESS 0 @@ -2719,7 +2721,7 @@ * Define your own with: * { , , hysteresis_start[1..8] } */ - #define CHOPPER_TIMING CHOPPER_DEFAULT_12V // All axes (override below) + #define CHOPPER_TIMING CHOPPER_DEFAULT_24V // All axes (override below) //#define CHOPPER_TIMING_X CHOPPER_TIMING // For X Axes (override below) //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X //#define CHOPPER_TIMING_Y CHOPPER_TIMING // For Y Axes (override below) @@ -2811,16 +2813,16 @@ #if EITHER(SENSORLESS_HOMING, SENSORLESS_PROBING) // TMC2209: 0...255. TMC2130: -64...63 - #define X_STALL_SENSITIVITY 8 + #define X_STALL_SENSITIVITY 75 #define X2_STALL_SENSITIVITY X_STALL_SENSITIVITY - #define Y_STALL_SENSITIVITY 8 + #define Y_STALL_SENSITIVITY 75 #define Y2_STALL_SENSITIVITY Y_STALL_SENSITIVITY //#define Z_STALL_SENSITIVITY 8 //#define Z2_STALL_SENSITIVITY Z_STALL_SENSITIVITY //#define Z3_STALL_SENSITIVITY Z_STALL_SENSITIVITY //#define Z4_STALL_SENSITIVITY Z_STALL_SENSITIVITY //#define SPI_ENDSTOPS // TMC2130 only - //#define IMPROVE_HOMING_RELIABILITY + #define IMPROVE_HOMING_RELIABILITY #endif /** @@ -2839,7 +2841,7 @@ * Beta feature! * Create a 50/50 square wave step pulse optimal for stepper drivers. */ - //#define SQUARE_WAVE_STEPPING + #define SQUARE_WAVE_STEPPING /** * Enable M122 debugging command for TMC stepper drivers. @@ -3474,11 +3476,11 @@ //#define NO_WORKSPACE_OFFSETS // Extra options for the M114 "Current Position" report -//#define M114_DETAIL // Use 'M114` for details to check planner calculations +#define M114_DETAIL // Use 'M114` for details to check planner calculations //#define M114_REALTIME // Real current position based on forward kinematics //#define M114_LEGACY // M114 used to synchronize on every call. Enable if needed. -//#define REPORT_FAN_CHANGE // Report the new fan speed when changed by M106 (and others) +#define REPORT_FAN_CHANGE // Report the new fan speed when changed by M106 (and others) /** * Set the number of proportional font spaces required to fill up a typical character space. @@ -3650,9 +3652,9 @@ * Host Prompt Support enables Marlin to use the host for user prompts so * filament runout and other processes can be managed from the host side. */ -//#define HOST_ACTION_COMMANDS +#define HOST_ACTION_COMMANDS #if ENABLED(HOST_ACTION_COMMANDS) - //#define HOST_PROMPT_SUPPORT + #define HOST_PROMPT_SUPPORT //#define HOST_START_MENU_ITEM // Add a menu item that tells the host to start #endif diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/2-into-1 Hotend/Configuration.h b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/2-into-1 Hotend/Configuration.h index 78c2dc9160..a8c6595b32 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/2-into-1 Hotend/Configuration.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/2-into-1 Hotend/Configuration.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Creality/Ender-3/BigTreeTech SKR E3 Turbo/2-into-1 Hotend" + /** * Configuration.h * @@ -69,7 +71,7 @@ // @section info // Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes. +#define STRING_CONFIG_H_AUTHOR "(thisiskeithb, Ender-3)" // Who made the changes. //#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) /** @@ -102,14 +104,14 @@ * * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] */ -#define SERIAL_PORT 0 +#define SERIAL_PORT -1 /** * Select a secondary serial port on the board to use for communication with the host. * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] */ -//#define SERIAL_PORT_2 -1 +#define SERIAL_PORT_2 0 /** * Select a third serial port on the board to use for communication with the host. @@ -127,18 +129,18 @@ * * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ -#define BAUDRATE 250000 +#define BAUDRATE 115200 // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH // Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_RAMPS_14_EFB + #define MOTHERBOARD BOARD_BTT_SKR_E3_TURBO #endif // Name displayed in the LCD "Ready" message and Info menu -//#define CUSTOM_MACHINE_NAME "3D Printer" +#define CUSTOM_MACHINE_NAME "Ender-3" // Printer's unique ID, used by some programs to differentiate between machines. // Choose your own or use a service like https://www.uuidgenerator.net/version4 @@ -148,13 +150,13 @@ // This defines the number of extruders // :[0, 1, 2, 3, 4, 5, 6, 7, 8] -#define EXTRUDERS 1 +#define EXTRUDERS 2 // Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc. #define DEFAULT_NOMINAL_FILAMENT_DIA 1.75 // For Cyclops or any "multi-extruder" that shares a single nozzle. -//#define SINGLENOZZLE +#define SINGLENOZZLE // Save and restore temperature and fan speed on tool-change. // Set standby for the unselected tool with M104/106/109 T... @@ -424,7 +426,7 @@ #define TEMP_SENSOR_5 0 #define TEMP_SENSOR_6 0 #define TEMP_SENSOR_7 0 -#define TEMP_SENSOR_BED 0 +#define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 #define TEMP_SENSOR_COOLER 0 @@ -480,7 +482,7 @@ #define HEATER_5_MAXTEMP 275 #define HEATER_6_MAXTEMP 275 #define HEATER_7_MAXTEMP 275 -#define BED_MAXTEMP 150 +#define BED_MAXTEMP 125 #define CHAMBER_MAXTEMP 60 /** @@ -510,16 +512,17 @@ //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) // Set/get with gcode: M301 E[extruder number, 0-2] + // Creality Ender-3 #if ENABLED(PID_PARAMS_PER_HOTEND) // Specify between 1 and HOTENDS values per array. // If fewer than EXTRUDER values are provided, the last element will be repeated. - #define DEFAULT_Kp_LIST { 22.20, 22.20 } - #define DEFAULT_Ki_LIST { 1.08, 1.08 } - #define DEFAULT_Kd_LIST { 114.00, 114.00 } + #define DEFAULT_Kp_LIST { 21.73, 21.73 } + #define DEFAULT_Ki_LIST { 1.54, 1.54 } + #define DEFAULT_Kd_LIST { 76.55, 76.55 } #else - #define DEFAULT_Kp 22.20 - #define DEFAULT_Ki 1.08 - #define DEFAULT_Kd 114.00 + #define DEFAULT_Kp 21.73 + #define DEFAULT_Ki 1.54 + #define DEFAULT_Kd 76.55 #endif #endif // PIDTEMP @@ -556,11 +559,9 @@ //#define MIN_BED_POWER 0 //#define PID_BED_DEBUG // Sends debug data to the serial port. - // 120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - // from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) - #define DEFAULT_bedKp 10.00 - #define DEFAULT_bedKi .023 - #define DEFAULT_bedKd 305.4 + #define DEFAULT_bedKp 50.71 + #define DEFAULT_bedKi 9.88 + #define DEFAULT_bedKd 173.43 // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. #endif // PIDTEMPBED @@ -634,7 +635,7 @@ * Note: For Bowden Extruders make this large enough to allow load/unload. */ #define PREVENT_LENGTHY_EXTRUDE -#define EXTRUDE_MAXLENGTH 200 +#define EXTRUDE_MAXLENGTH 600 //=========================================================================== //======================== Thermal Runaway Protection ======================= @@ -743,16 +744,16 @@ * TMC5130, TMC5130_STANDALONE, TMC5160, TMC5160_STANDALONE * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'L6474', 'POWERSTEP01', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2160', 'TMC2160_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC2209', 'TMC2209_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE', 'TMC5160', 'TMC5160_STANDALONE'] */ -#define X_DRIVER_TYPE A4988 -#define Y_DRIVER_TYPE A4988 -#define Z_DRIVER_TYPE A4988 +#define X_DRIVER_TYPE TMC2209 +#define Y_DRIVER_TYPE TMC2209 +#define Z_DRIVER_TYPE TMC2209 //#define X2_DRIVER_TYPE A4988 //#define Y2_DRIVER_TYPE A4988 //#define Z2_DRIVER_TYPE A4988 //#define Z3_DRIVER_TYPE A4988 //#define Z4_DRIVER_TYPE A4988 -#define E0_DRIVER_TYPE A4988 -//#define E1_DRIVER_TYPE A4988 +#define E0_DRIVER_TYPE TMC2209 +#define E1_DRIVER_TYPE TMC2209 //#define E2_DRIVER_TYPE A4988 //#define E3_DRIVER_TYPE A4988 //#define E4_DRIVER_TYPE A4988 @@ -806,14 +807,14 @@ * Override with M92 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 500 } +#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 93 } /** * Default Max Feed Rate (mm/s) * Override with M203 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 } +#define DEFAULT_MAX_FEEDRATE { 500, 500, 5, 25 } //#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 #if ENABLED(LIMITED_MAX_FR_EDITING) @@ -826,7 +827,7 @@ * Override with M201 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 } +#define DEFAULT_MAX_ACCELERATION { 500, 500, 100, 5000 } //#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 #if ENABLED(LIMITED_MAX_ACCEL_EDITING) @@ -841,9 +842,9 @@ * M204 R Retract Acceleration * M204 T Travel Acceleration */ -#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves +#define DEFAULT_ACCELERATION 500 // X, Y, Z and E acceleration for printing moves +#define DEFAULT_RETRACT_ACCELERATION 500 // E acceleration for retracts +#define DEFAULT_TRAVEL_ACCELERATION 500 // X, Y, Z acceleration for travel (non printing) moves /** * Default Jerk limits (mm/s) @@ -877,7 +878,7 @@ * https://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html */ #if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.013 // (mm) Distance from real junction edge + #define JUNCTION_DEVIATION_MM 0.08 // (mm) Distance from real junction edge #define JD_HANDLE_SMALL_SEGMENTS // Use curvature estimation instead of just the junction angle // for small segments (< 1mm) with large junction angles (> 135°). #endif @@ -890,7 +891,7 @@ * * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained */ -//#define S_CURVE_ACCELERATION +#define S_CURVE_ACCELERATION //=========================================================================== //============================= Z Probe Options ============================= @@ -1190,14 +1191,14 @@ // @section machine // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR false +#define INVERT_X_DIR true #define INVERT_Y_DIR true #define INVERT_Z_DIR false // @section extruder // For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR false +#define INVERT_E0_DIR true #define INVERT_E1_DIR false #define INVERT_E2_DIR false #define INVERT_E3_DIR false @@ -1232,8 +1233,8 @@ // @section machine // The size of the printable area -#define X_BED_SIZE 200 -#define Y_BED_SIZE 200 +#define X_BED_SIZE 235 +#define Y_BED_SIZE 235 // Travel limits (mm) after homing, corresponding to endstop positions. #define X_MIN_POS 0 @@ -1241,7 +1242,7 @@ #define Z_MIN_POS 0 #define X_MAX_POS X_BED_SIZE #define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 200 +#define Z_MAX_POS 250 /** * Software Endstops @@ -1389,7 +1390,7 @@ //#define AUTO_BED_LEVELING_LINEAR //#define AUTO_BED_LEVELING_BILINEAR //#define AUTO_BED_LEVELING_UBL -//#define MESH_BED_LEVELING +#define MESH_BED_LEVELING /** * Normally G28 leaves leveling disabled on completion. Enable one of @@ -1454,7 +1455,7 @@ #if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR) // Set the number of grid points per dimension. - #define GRID_MAX_POINTS_X 3 + #define GRID_MAX_POINTS_X 5 #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X // Probe along the Y axis, advancing X after each column @@ -1464,7 +1465,7 @@ // Beyond the probed grid, continue the implied tilt? // Default is to maintain the height of the nearest edge. - //#define EXTRAPOLATE_BEYOND_GRID + #define EXTRAPOLATE_BEYOND_GRID // // Experimental Subdivision of the grid by Catmull-Rom method. @@ -1518,16 +1519,16 @@ * Add a bed leveling sub-menu for ABL or MBL. * Include a guided procedure if manual probing is enabled. */ -//#define LCD_BED_LEVELING +#define LCD_BED_LEVELING #if ENABLED(LCD_BED_LEVELING) #define MESH_EDIT_Z_STEP 0.025 // (mm) Step size while manually probing Z axis. #define LCD_PROBE_Z_RANGE 4 // (mm) Z Range centered on Z_MIN_POS for LCD Z adjustment - //#define MESH_EDIT_MENU // Add a menu to edit mesh points + #define MESH_EDIT_MENU // Add a menu to edit mesh points #endif // Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS +#define LEVEL_BED_CORNERS #if ENABLED(LEVEL_BED_CORNERS) #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets @@ -1595,7 +1596,7 @@ #endif // Homing speeds (mm/min) -#define HOMING_FEEDRATE_MM_M { (50*60), (50*60), (4*60) } +#define HOMING_FEEDRATE_MM_M { (20*60), (20*60), (4*60) } // Validate that endstops are triggered on homing moves #define VALIDATE_HOMING_ENDSTOPS @@ -1672,12 +1673,12 @@ * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) */ -//#define EEPROM_SETTINGS // Persistent storage with M500 and M501 +#define EEPROM_SETTINGS // Persistent storage with M500 and M501 //#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. #define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load #if ENABLED(EEPROM_SETTINGS) - //#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. + #define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. #endif // @@ -1706,16 +1707,16 @@ // Preheat Constants - Up to 5 are supported without changes // #define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 180 -#define PREHEAT_1_TEMP_BED 70 +#define PREHEAT_1_TEMP_HOTEND 185 +#define PREHEAT_1_TEMP_BED 45 #define PREHEAT_1_TEMP_CHAMBER 35 -#define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 +#define PREHEAT_1_FAN_SPEED 255 // Value from 0 to 255 #define PREHEAT_2_LABEL "ABS" #define PREHEAT_2_TEMP_HOTEND 240 #define PREHEAT_2_TEMP_BED 110 #define PREHEAT_2_TEMP_CHAMBER 35 -#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 +#define PREHEAT_2_FAN_SPEED 255 // Value from 0 to 255 /** * Nozzle Park @@ -1728,7 +1729,7 @@ * P1 Raise the nozzle always to Z-park height. * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. */ -//#define NOZZLE_PARK_FEATURE +#define NOZZLE_PARK_FEATURE #if ENABLED(NOZZLE_PARK_FEATURE) // Specify a park position as { X, Y, Z_raise } @@ -1936,7 +1937,7 @@ * SD Card support is disabled by default. If your controller has an SD slot, * you must uncomment the following option or it won't work. */ -//#define SDSUPPORT +#define SDSUPPORT /** * SD CARD: ENABLE CRC @@ -2006,7 +2007,7 @@ // // Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. // -//#define INDIVIDUAL_AXIS_HOMING_MENU +#define INDIVIDUAL_AXIS_HOMING_MENU // // SPEAKER/BUZZER @@ -2014,7 +2015,7 @@ // If you have a speaker that can produce tones, enable it here. // By default Marlin assumes you have a buzzer with a fixed frequency. // -//#define SPEAKER +#define SPEAKER // // The duration and frequency for the UI feedback sound. @@ -2287,7 +2288,7 @@ // This is RAMPS-compatible using a single 10-pin connector. // (For CR-10 owners who want to replace the Melzi Creality board but retain the display) // -//#define CR10_STOCKDISPLAY +#define CR10_STOCKDISPLAY // // Ender-2 OEM display, a variant of the MKS_MINI_12864 diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/2-into-1 Hotend/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/2-into-1 Hotend/Configuration_adv.h index 5335fa012a..fe268f5a51 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/2-into-1 Hotend/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/2-into-1 Hotend/Configuration_adv.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Creality/Ender-3/BigTreeTech SKR E3 Turbo/2-into-1 Hotend" + /** * Configuration_adv.h * @@ -479,7 +481,7 @@ // When first starting the main fan, run it at full speed for the // given number of milliseconds. This gets the fan spinning reliably // before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) -//#define FAN_KICKSTART_TIME 100 +#define FAN_KICKSTART_TIME 800 // Some coolers may require a non-zero "off" state. //#define FAN_OFF_PWM 1 @@ -540,7 +542,7 @@ * Multiple extruders can be assigned to the same pin in which case * the fan will turn on when any selected extruder is above the threshold. */ -#define E0_AUTO_FAN_PIN -1 +#define E0_AUTO_FAN_PIN FAN1_PIN #define E1_AUTO_FAN_PIN -1 #define E2_AUTO_FAN_PIN -1 #define E3_AUTO_FAN_PIN -1 @@ -736,12 +738,12 @@ //#define SENSORLESS_BACKOFF_MM { 2, 2 } // (mm) Backoff from endstops before sensorless homing -#define HOMING_BUMP_MM { 5, 5, 2 } // (mm) Backoff from endstops after first bump +#define HOMING_BUMP_MM { 0, 0, 2 } // (mm) Backoff from endstops after first bump #define HOMING_BUMP_DIVISOR { 2, 2, 4 } // Re-Bump Speed Divisor (Divides the Homing Feedrate) //#define HOMING_BACKOFF_POST_MM { 2, 2, 2 } // (mm) Backoff from endstops after homing -//#define QUICK_HOME // If G28 contains XY do a diagonal move first +#define QUICK_HOME // If G28 contains XY do a diagonal move first //#define HOME_Y_BEFORE_X // If G28 contains XY home Y before X //#define HOME_Z_FIRST // Home Z first. Requires a Z-MIN endstop (not a probe). //#define CODEPENDENT_XY_HOMING // If X/Y can't home without homing Y/X first @@ -1175,7 +1177,7 @@ #endif // Include a page of printer information in the LCD Main Menu - //#define LCD_INFO_MENU + #define LCD_INFO_MENU #if ENABLED(LCD_INFO_MENU) //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages #endif @@ -1229,13 +1231,13 @@ #endif // Scroll a longer status message into view - //#define STATUS_MESSAGE_SCROLLING + #define STATUS_MESSAGE_SCROLLING // On the Info Screen, display XY with one decimal place when possible //#define LCD_DECIMAL_SMALL_XY // Add an 'M73' G-code to set the current percentage - //#define LCD_SET_PROGRESS_MANUALLY + #define LCD_SET_PROGRESS_MANUALLY // Show the E position (filament used) during printing //#define LCD_SHOW_E_TOTAL @@ -1361,16 +1363,16 @@ * - SDSORT_CACHE_NAMES will retain the sorted file listing in RAM. (Expensive!) * - SDSORT_DYNAMIC_RAM only uses RAM when the SD menu is visible. (Use with caution!) */ - //#define SDCARD_SORT_ALPHA + #define SDCARD_SORT_ALPHA // SD Card Sorting options #if ENABLED(SDCARD_SORT_ALPHA) #define SDSORT_LIMIT 40 // Maximum number of sorted items (10-256). Costs 27 bytes each. #define FOLDER_SORTING -1 // -1=above 0=none 1=below #define SDSORT_GCODE false // Allow turning sorting on/off with LCD and M34 G-code. - #define SDSORT_USES_RAM false // Pre-allocate a static array for faster pre-sorting. + #define SDSORT_USES_RAM true // Pre-allocate a static array for faster pre-sorting. #define SDSORT_USES_STACK false // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.) - #define SDSORT_CACHE_NAMES false // Keep sorted items in RAM longer for speedy performance. Most expensive option. + #define SDSORT_CACHE_NAMES true // Keep sorted items in RAM longer for speedy performance. Most expensive option. #define SDSORT_DYNAMIC_RAM false // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use! #define SDSORT_CACHE_VFATS 2 // Maximum number of 13-byte VFAT entries to use for sorting. // Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM. @@ -1381,10 +1383,10 @@ //#define UTF_FILENAME_SUPPORT // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT + #define LONG_FILENAME_HOST_SUPPORT // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES + #define SCROLL_LONG_FILENAMES // Leave the heaters on after Stop Print (not recommended!) //#define SD_ABORT_NO_COOLDOWN @@ -1476,7 +1478,7 @@ * * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] */ - //#define SDCARD_CONNECTION LCD + #define SDCARD_CONNECTION ONBOARD // Enable if SD detect is rendered useless (e.g., by using an SD extender) //#define NO_SD_DETECT @@ -1790,7 +1792,7 @@ * * Warning: Does not respect endstops! */ -//#define BABYSTEPPING +#define BABYSTEPPING #if ENABLED(BABYSTEPPING) //#define INTEGRATED_BABYSTEPPING // EXPERIMENTAL integration of babystepping into the Stepper ISR //#define BABYSTEP_WITHOUT_HOMING @@ -1801,7 +1803,7 @@ #define BABYSTEP_MULTIPLICATOR_Z 1 // (steps or mm) Steps or millimeter distance for each Z babystep #define BABYSTEP_MULTIPLICATOR_XY 1 // (steps or mm) Steps or millimeter distance for each XY babystep - //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. + #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. // Note: Extra time may be added to mitigate controller latency. @@ -1837,12 +1839,12 @@ * * See https://marlinfw.org/docs/features/lin_advance.html for full instructions. */ -//#define LIN_ADVANCE +#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) //#define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants - #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed + #define LIN_ADVANCE_K 0.0 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // If enabled, this will generate debug information output over USB. - //#define EXPERIMENTAL_SCURVE // Enable this option to permit S-Curve Acceleration + #define EXPERIMENTAL_SCURVE // Enable this option to permit S-Curve Acceleration #endif // @section leveling @@ -2141,7 +2143,7 @@ * Currently handles M108, M112, M410, M876 * NOTE: Not yet implemented for all platforms. */ -//#define EMERGENCY_PARSER +#define EMERGENCY_PARSER /** * Realtime Reporting (requires EMERGENCY_PARSER) @@ -2311,14 +2313,14 @@ * * Enable PARK_HEAD_ON_PAUSE to add the G-code M125 Pause and Park. */ -//#define ADVANCED_PAUSE_FEATURE +#define ADVANCED_PAUSE_FEATURE #if ENABLED(ADVANCED_PAUSE_FEATURE) #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. // This short retract is done immediately, before parking the nozzle. #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast. #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload. + #define FILAMENT_CHANGE_UNLOAD_LENGTH 400 // (mm) The length of filament for a complete unload. // For Bowden, the full length of the tube and nozzle. // For direct drive, the full length of the nozzle. // Set to 0 for manual unloading. @@ -2327,7 +2329,7 @@ // 0 to disable start loading and skip to fast load only #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast. #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle. + #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 350 // (mm) Load length of filament, from extruder gear to nozzle. // For Bowden, the full length of the tube and nozzle. // For direct drive, the full length of the nozzle. //#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted. @@ -2349,10 +2351,10 @@ #define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed. #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change. - //#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. - //#define HOME_BEFORE_FILAMENT_CHANGE // If needed, home before parking for filament change + #define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. + #define HOME_BEFORE_FILAMENT_CHANGE // If needed, home before parking for filament change - //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. + #define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) #endif @@ -2493,8 +2495,8 @@ #define INTERPOLATE true #if AXIS_IS_TMC(X) - #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. - #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for sensorless homing + #define X_CURRENT 580 // (mA) RMS current. Multiply by 1.414 for peak current. + #define X_CURRENT_HOME (X_CURRENT/2) // (mA) RMS current for sensorless homing #define X_MICROSTEPS 16 // 0..256 #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... @@ -2511,8 +2513,8 @@ #endif #if AXIS_IS_TMC(Y) - #define Y_CURRENT 800 - #define Y_CURRENT_HOME Y_CURRENT + #define Y_CURRENT 580 + #define Y_CURRENT_HOME (Y_CURRENT/2) #define Y_MICROSTEPS 16 #define Y_RSENSE 0.11 #define Y_CHAIN_POS -1 @@ -2529,7 +2531,7 @@ #endif #if AXIS_IS_TMC(Z) - #define Z_CURRENT 800 + #define Z_CURRENT 580 #define Z_CURRENT_HOME Z_CURRENT #define Z_MICROSTEPS 16 #define Z_RSENSE 0.11 @@ -2565,7 +2567,7 @@ #endif #if AXIS_IS_TMC(E0) - #define E0_CURRENT 800 + #define E0_CURRENT 650 #define E0_MICROSTEPS 16 #define E0_RSENSE 0.11 #define E0_CHAIN_POS -1 @@ -2573,7 +2575,7 @@ #endif #if AXIS_IS_TMC(E1) - #define E1_CURRENT 800 + #define E1_CURRENT 650 #define E1_MICROSTEPS E0_MICROSTEPS #define E1_RSENSE 0.11 #define E1_CHAIN_POS -1 @@ -2719,7 +2721,7 @@ * Define your own with: * { , , hysteresis_start[1..8] } */ - #define CHOPPER_TIMING CHOPPER_DEFAULT_12V // All axes (override below) + #define CHOPPER_TIMING CHOPPER_DEFAULT_24V // All axes (override below) //#define CHOPPER_TIMING_X CHOPPER_TIMING // For X Axes (override below) //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X //#define CHOPPER_TIMING_Y CHOPPER_TIMING // For Y Axes (override below) @@ -2811,16 +2813,16 @@ #if EITHER(SENSORLESS_HOMING, SENSORLESS_PROBING) // TMC2209: 0...255. TMC2130: -64...63 - #define X_STALL_SENSITIVITY 8 + #define X_STALL_SENSITIVITY 75 #define X2_STALL_SENSITIVITY X_STALL_SENSITIVITY - #define Y_STALL_SENSITIVITY 8 + #define Y_STALL_SENSITIVITY 75 #define Y2_STALL_SENSITIVITY Y_STALL_SENSITIVITY //#define Z_STALL_SENSITIVITY 8 //#define Z2_STALL_SENSITIVITY Z_STALL_SENSITIVITY //#define Z3_STALL_SENSITIVITY Z_STALL_SENSITIVITY //#define Z4_STALL_SENSITIVITY Z_STALL_SENSITIVITY //#define SPI_ENDSTOPS // TMC2130 only - //#define IMPROVE_HOMING_RELIABILITY + #define IMPROVE_HOMING_RELIABILITY #endif /** @@ -2839,7 +2841,7 @@ * Beta feature! * Create a 50/50 square wave step pulse optimal for stepper drivers. */ - //#define SQUARE_WAVE_STEPPING + #define SQUARE_WAVE_STEPPING /** * Enable M122 debugging command for TMC stepper drivers. diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Dual Z/Configuration.h b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Dual Z/Configuration.h index 78c2dc9160..931ceb7342 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Dual Z/Configuration.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Dual Z/Configuration.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Creality/Ender-3/BigTreeTech SKR E3 Turbo/Dual Z" + /** * Configuration.h * @@ -69,7 +71,7 @@ // @section info // Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes. +#define STRING_CONFIG_H_AUTHOR "(thisiskeithb, Ender-3)" // Who made the changes. //#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) /** @@ -102,14 +104,14 @@ * * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] */ -#define SERIAL_PORT 0 +#define SERIAL_PORT -1 /** * Select a secondary serial port on the board to use for communication with the host. * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] */ -//#define SERIAL_PORT_2 -1 +#define SERIAL_PORT_2 0 /** * Select a third serial port on the board to use for communication with the host. @@ -127,18 +129,18 @@ * * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ -#define BAUDRATE 250000 +#define BAUDRATE 115200 // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH // Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_RAMPS_14_EFB + #define MOTHERBOARD BOARD_BTT_SKR_E3_TURBO #endif // Name displayed in the LCD "Ready" message and Info menu -//#define CUSTOM_MACHINE_NAME "3D Printer" +#define CUSTOM_MACHINE_NAME "Ender-3" // Printer's unique ID, used by some programs to differentiate between machines. // Choose your own or use a service like https://www.uuidgenerator.net/version4 @@ -424,7 +426,7 @@ #define TEMP_SENSOR_5 0 #define TEMP_SENSOR_6 0 #define TEMP_SENSOR_7 0 -#define TEMP_SENSOR_BED 0 +#define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 #define TEMP_SENSOR_COOLER 0 @@ -480,7 +482,7 @@ #define HEATER_5_MAXTEMP 275 #define HEATER_6_MAXTEMP 275 #define HEATER_7_MAXTEMP 275 -#define BED_MAXTEMP 150 +#define BED_MAXTEMP 125 #define CHAMBER_MAXTEMP 60 /** @@ -510,16 +512,17 @@ //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) // Set/get with gcode: M301 E[extruder number, 0-2] + // Creality Ender-3 #if ENABLED(PID_PARAMS_PER_HOTEND) // Specify between 1 and HOTENDS values per array. // If fewer than EXTRUDER values are provided, the last element will be repeated. - #define DEFAULT_Kp_LIST { 22.20, 22.20 } - #define DEFAULT_Ki_LIST { 1.08, 1.08 } - #define DEFAULT_Kd_LIST { 114.00, 114.00 } + #define DEFAULT_Kp_LIST { 21.73, 21.73 } + #define DEFAULT_Ki_LIST { 1.54, 1.54 } + #define DEFAULT_Kd_LIST { 76.55, 76.55 } #else - #define DEFAULT_Kp 22.20 - #define DEFAULT_Ki 1.08 - #define DEFAULT_Kd 114.00 + #define DEFAULT_Kp 21.73 + #define DEFAULT_Ki 1.54 + #define DEFAULT_Kd 76.55 #endif #endif // PIDTEMP @@ -556,11 +559,9 @@ //#define MIN_BED_POWER 0 //#define PID_BED_DEBUG // Sends debug data to the serial port. - // 120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - // from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) - #define DEFAULT_bedKp 10.00 - #define DEFAULT_bedKi .023 - #define DEFAULT_bedKd 305.4 + #define DEFAULT_bedKp 50.71 + #define DEFAULT_bedKi 9.88 + #define DEFAULT_bedKd 173.43 // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. #endif // PIDTEMPBED @@ -634,7 +635,7 @@ * Note: For Bowden Extruders make this large enough to allow load/unload. */ #define PREVENT_LENGTHY_EXTRUDE -#define EXTRUDE_MAXLENGTH 200 +#define EXTRUDE_MAXLENGTH 600 //=========================================================================== //======================== Thermal Runaway Protection ======================= @@ -743,15 +744,15 @@ * TMC5130, TMC5130_STANDALONE, TMC5160, TMC5160_STANDALONE * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'L6474', 'POWERSTEP01', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2160', 'TMC2160_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC2209', 'TMC2209_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE', 'TMC5160', 'TMC5160_STANDALONE'] */ -#define X_DRIVER_TYPE A4988 -#define Y_DRIVER_TYPE A4988 -#define Z_DRIVER_TYPE A4988 +#define X_DRIVER_TYPE TMC2209 +#define Y_DRIVER_TYPE TMC2209 +#define Z_DRIVER_TYPE TMC2209 //#define X2_DRIVER_TYPE A4988 //#define Y2_DRIVER_TYPE A4988 -//#define Z2_DRIVER_TYPE A4988 +#define Z2_DRIVER_TYPE TMC2209 //#define Z3_DRIVER_TYPE A4988 //#define Z4_DRIVER_TYPE A4988 -#define E0_DRIVER_TYPE A4988 +#define E0_DRIVER_TYPE TMC2209 //#define E1_DRIVER_TYPE A4988 //#define E2_DRIVER_TYPE A4988 //#define E3_DRIVER_TYPE A4988 @@ -806,14 +807,14 @@ * Override with M92 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 500 } +#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 93 } /** * Default Max Feed Rate (mm/s) * Override with M203 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 } +#define DEFAULT_MAX_FEEDRATE { 500, 500, 5, 25 } //#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 #if ENABLED(LIMITED_MAX_FR_EDITING) @@ -826,7 +827,7 @@ * Override with M201 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 } +#define DEFAULT_MAX_ACCELERATION { 500, 500, 100, 5000 } //#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 #if ENABLED(LIMITED_MAX_ACCEL_EDITING) @@ -841,9 +842,9 @@ * M204 R Retract Acceleration * M204 T Travel Acceleration */ -#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves +#define DEFAULT_ACCELERATION 500 // X, Y, Z and E acceleration for printing moves +#define DEFAULT_RETRACT_ACCELERATION 500 // E acceleration for retracts +#define DEFAULT_TRAVEL_ACCELERATION 500 // X, Y, Z acceleration for travel (non printing) moves /** * Default Jerk limits (mm/s) @@ -877,7 +878,7 @@ * https://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html */ #if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.013 // (mm) Distance from real junction edge + #define JUNCTION_DEVIATION_MM 0.08 // (mm) Distance from real junction edge #define JD_HANDLE_SMALL_SEGMENTS // Use curvature estimation instead of just the junction angle // for small segments (< 1mm) with large junction angles (> 135°). #endif @@ -890,7 +891,7 @@ * * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained */ -//#define S_CURVE_ACCELERATION +#define S_CURVE_ACCELERATION //=========================================================================== //============================= Z Probe Options ============================= @@ -1190,14 +1191,14 @@ // @section machine // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR false +#define INVERT_X_DIR true #define INVERT_Y_DIR true #define INVERT_Z_DIR false // @section extruder // For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR false +#define INVERT_E0_DIR true #define INVERT_E1_DIR false #define INVERT_E2_DIR false #define INVERT_E3_DIR false @@ -1232,8 +1233,8 @@ // @section machine // The size of the printable area -#define X_BED_SIZE 200 -#define Y_BED_SIZE 200 +#define X_BED_SIZE 235 +#define Y_BED_SIZE 235 // Travel limits (mm) after homing, corresponding to endstop positions. #define X_MIN_POS 0 @@ -1241,7 +1242,7 @@ #define Z_MIN_POS 0 #define X_MAX_POS X_BED_SIZE #define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 200 +#define Z_MAX_POS 250 /** * Software Endstops @@ -1389,7 +1390,7 @@ //#define AUTO_BED_LEVELING_LINEAR //#define AUTO_BED_LEVELING_BILINEAR //#define AUTO_BED_LEVELING_UBL -//#define MESH_BED_LEVELING +#define MESH_BED_LEVELING /** * Normally G28 leaves leveling disabled on completion. Enable one of @@ -1454,7 +1455,7 @@ #if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR) // Set the number of grid points per dimension. - #define GRID_MAX_POINTS_X 3 + #define GRID_MAX_POINTS_X 5 #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X // Probe along the Y axis, advancing X after each column @@ -1464,7 +1465,7 @@ // Beyond the probed grid, continue the implied tilt? // Default is to maintain the height of the nearest edge. - //#define EXTRAPOLATE_BEYOND_GRID + #define EXTRAPOLATE_BEYOND_GRID // // Experimental Subdivision of the grid by Catmull-Rom method. @@ -1518,16 +1519,16 @@ * Add a bed leveling sub-menu for ABL or MBL. * Include a guided procedure if manual probing is enabled. */ -//#define LCD_BED_LEVELING +#define LCD_BED_LEVELING #if ENABLED(LCD_BED_LEVELING) #define MESH_EDIT_Z_STEP 0.025 // (mm) Step size while manually probing Z axis. #define LCD_PROBE_Z_RANGE 4 // (mm) Z Range centered on Z_MIN_POS for LCD Z adjustment - //#define MESH_EDIT_MENU // Add a menu to edit mesh points + #define MESH_EDIT_MENU // Add a menu to edit mesh points #endif // Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS +#define LEVEL_BED_CORNERS #if ENABLED(LEVEL_BED_CORNERS) #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets @@ -1595,7 +1596,7 @@ #endif // Homing speeds (mm/min) -#define HOMING_FEEDRATE_MM_M { (50*60), (50*60), (4*60) } +#define HOMING_FEEDRATE_MM_M { (20*60), (20*60), (4*60) } // Validate that endstops are triggered on homing moves #define VALIDATE_HOMING_ENDSTOPS @@ -1672,12 +1673,12 @@ * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) */ -//#define EEPROM_SETTINGS // Persistent storage with M500 and M501 +#define EEPROM_SETTINGS // Persistent storage with M500 and M501 //#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. #define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load #if ENABLED(EEPROM_SETTINGS) - //#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. + #define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. #endif // @@ -1706,16 +1707,16 @@ // Preheat Constants - Up to 5 are supported without changes // #define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 180 -#define PREHEAT_1_TEMP_BED 70 +#define PREHEAT_1_TEMP_HOTEND 185 +#define PREHEAT_1_TEMP_BED 45 #define PREHEAT_1_TEMP_CHAMBER 35 -#define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 +#define PREHEAT_1_FAN_SPEED 255 // Value from 0 to 255 #define PREHEAT_2_LABEL "ABS" #define PREHEAT_2_TEMP_HOTEND 240 #define PREHEAT_2_TEMP_BED 110 #define PREHEAT_2_TEMP_CHAMBER 35 -#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 +#define PREHEAT_2_FAN_SPEED 255 // Value from 0 to 255 /** * Nozzle Park @@ -1728,7 +1729,7 @@ * P1 Raise the nozzle always to Z-park height. * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. */ -//#define NOZZLE_PARK_FEATURE +#define NOZZLE_PARK_FEATURE #if ENABLED(NOZZLE_PARK_FEATURE) // Specify a park position as { X, Y, Z_raise } @@ -1936,7 +1937,7 @@ * SD Card support is disabled by default. If your controller has an SD slot, * you must uncomment the following option or it won't work. */ -//#define SDSUPPORT +#define SDSUPPORT /** * SD CARD: ENABLE CRC @@ -2006,7 +2007,7 @@ // // Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. // -//#define INDIVIDUAL_AXIS_HOMING_MENU +#define INDIVIDUAL_AXIS_HOMING_MENU // // SPEAKER/BUZZER @@ -2014,7 +2015,7 @@ // If you have a speaker that can produce tones, enable it here. // By default Marlin assumes you have a buzzer with a fixed frequency. // -//#define SPEAKER +#define SPEAKER // // The duration and frequency for the UI feedback sound. @@ -2287,7 +2288,7 @@ // This is RAMPS-compatible using a single 10-pin connector. // (For CR-10 owners who want to replace the Melzi Creality board but retain the display) // -//#define CR10_STOCKDISPLAY +#define CR10_STOCKDISPLAY // // Ender-2 OEM display, a variant of the MKS_MINI_12864 diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Dual Z/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Dual Z/Configuration_adv.h index 5335fa012a..405aca850e 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Dual Z/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Dual Z/Configuration_adv.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Creality/Ender-3/BigTreeTech SKR E3 Turbo/Dual Z" + /** * Configuration_adv.h * @@ -479,7 +481,7 @@ // When first starting the main fan, run it at full speed for the // given number of milliseconds. This gets the fan spinning reliably // before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) -//#define FAN_KICKSTART_TIME 100 +#define FAN_KICKSTART_TIME 800 // Some coolers may require a non-zero "off" state. //#define FAN_OFF_PWM 1 @@ -540,7 +542,7 @@ * Multiple extruders can be assigned to the same pin in which case * the fan will turn on when any selected extruder is above the threshold. */ -#define E0_AUTO_FAN_PIN -1 +#define E0_AUTO_FAN_PIN FAN1_PIN #define E1_AUTO_FAN_PIN -1 #define E2_AUTO_FAN_PIN -1 #define E3_AUTO_FAN_PIN -1 @@ -648,7 +650,7 @@ // // For Z set the number of stepper drivers // -#define NUM_Z_STEPPER_DRIVERS 1 // (1-4) Z options change based on how many +#define NUM_Z_STEPPER_DRIVERS 2 // (1-4) Z options change based on how many #if NUM_Z_STEPPER_DRIVERS > 1 // Enable if Z motor direction signals are the opposite of Z1 @@ -736,12 +738,12 @@ //#define SENSORLESS_BACKOFF_MM { 2, 2 } // (mm) Backoff from endstops before sensorless homing -#define HOMING_BUMP_MM { 5, 5, 2 } // (mm) Backoff from endstops after first bump +#define HOMING_BUMP_MM { 0, 0, 2 } // (mm) Backoff from endstops after first bump #define HOMING_BUMP_DIVISOR { 2, 2, 4 } // Re-Bump Speed Divisor (Divides the Homing Feedrate) //#define HOMING_BACKOFF_POST_MM { 2, 2, 2 } // (mm) Backoff from endstops after homing -//#define QUICK_HOME // If G28 contains XY do a diagonal move first +#define QUICK_HOME // If G28 contains XY do a diagonal move first //#define HOME_Y_BEFORE_X // If G28 contains XY home Y before X //#define HOME_Z_FIRST // Home Z first. Requires a Z-MIN endstop (not a probe). //#define CODEPENDENT_XY_HOMING // If X/Y can't home without homing Y/X first @@ -928,7 +930,7 @@ #define DEFAULT_STEPPER_DEACTIVE_TIME 120 #define DISABLE_INACTIVE_X true #define DISABLE_INACTIVE_Y true -#define DISABLE_INACTIVE_Z true // Set 'false' if the nozzle could fall onto your printed part! +#define DISABLE_INACTIVE_Z false // Set 'false' if the nozzle could fall onto your printed part! #define DISABLE_INACTIVE_E true // Default Minimum Feedrates for printing and travel moves @@ -1175,7 +1177,7 @@ #endif // Include a page of printer information in the LCD Main Menu - //#define LCD_INFO_MENU + #define LCD_INFO_MENU #if ENABLED(LCD_INFO_MENU) //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages #endif @@ -1229,13 +1231,13 @@ #endif // Scroll a longer status message into view - //#define STATUS_MESSAGE_SCROLLING + #define STATUS_MESSAGE_SCROLLING // On the Info Screen, display XY with one decimal place when possible //#define LCD_DECIMAL_SMALL_XY // Add an 'M73' G-code to set the current percentage - //#define LCD_SET_PROGRESS_MANUALLY + #define LCD_SET_PROGRESS_MANUALLY // Show the E position (filament used) during printing //#define LCD_SHOW_E_TOTAL @@ -1361,16 +1363,16 @@ * - SDSORT_CACHE_NAMES will retain the sorted file listing in RAM. (Expensive!) * - SDSORT_DYNAMIC_RAM only uses RAM when the SD menu is visible. (Use with caution!) */ - //#define SDCARD_SORT_ALPHA + #define SDCARD_SORT_ALPHA // SD Card Sorting options #if ENABLED(SDCARD_SORT_ALPHA) #define SDSORT_LIMIT 40 // Maximum number of sorted items (10-256). Costs 27 bytes each. #define FOLDER_SORTING -1 // -1=above 0=none 1=below #define SDSORT_GCODE false // Allow turning sorting on/off with LCD and M34 G-code. - #define SDSORT_USES_RAM false // Pre-allocate a static array for faster pre-sorting. + #define SDSORT_USES_RAM true // Pre-allocate a static array for faster pre-sorting. #define SDSORT_USES_STACK false // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.) - #define SDSORT_CACHE_NAMES false // Keep sorted items in RAM longer for speedy performance. Most expensive option. + #define SDSORT_CACHE_NAMES true // Keep sorted items in RAM longer for speedy performance. Most expensive option. #define SDSORT_DYNAMIC_RAM false // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use! #define SDSORT_CACHE_VFATS 2 // Maximum number of 13-byte VFAT entries to use for sorting. // Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM. @@ -1381,10 +1383,10 @@ //#define UTF_FILENAME_SUPPORT // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT + #define LONG_FILENAME_HOST_SUPPORT // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES + #define SCROLL_LONG_FILENAMES // Leave the heaters on after Stop Print (not recommended!) //#define SD_ABORT_NO_COOLDOWN @@ -1476,7 +1478,7 @@ * * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] */ - //#define SDCARD_CONNECTION LCD + #define SDCARD_CONNECTION ONBOARD // Enable if SD detect is rendered useless (e.g., by using an SD extender) //#define NO_SD_DETECT @@ -1790,7 +1792,7 @@ * * Warning: Does not respect endstops! */ -//#define BABYSTEPPING +#define BABYSTEPPING #if ENABLED(BABYSTEPPING) //#define INTEGRATED_BABYSTEPPING // EXPERIMENTAL integration of babystepping into the Stepper ISR //#define BABYSTEP_WITHOUT_HOMING @@ -1801,7 +1803,7 @@ #define BABYSTEP_MULTIPLICATOR_Z 1 // (steps or mm) Steps or millimeter distance for each Z babystep #define BABYSTEP_MULTIPLICATOR_XY 1 // (steps or mm) Steps or millimeter distance for each XY babystep - //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. + #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. // Note: Extra time may be added to mitigate controller latency. @@ -1837,12 +1839,12 @@ * * See https://marlinfw.org/docs/features/lin_advance.html for full instructions. */ -//#define LIN_ADVANCE +#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) //#define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants - #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed + #define LIN_ADVANCE_K 0.0 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // If enabled, this will generate debug information output over USB. - //#define EXPERIMENTAL_SCURVE // Enable this option to permit S-Curve Acceleration + #define EXPERIMENTAL_SCURVE // Enable this option to permit S-Curve Acceleration #endif // @section leveling @@ -2141,7 +2143,7 @@ * Currently handles M108, M112, M410, M876 * NOTE: Not yet implemented for all platforms. */ -//#define EMERGENCY_PARSER +#define EMERGENCY_PARSER /** * Realtime Reporting (requires EMERGENCY_PARSER) @@ -2311,14 +2313,14 @@ * * Enable PARK_HEAD_ON_PAUSE to add the G-code M125 Pause and Park. */ -//#define ADVANCED_PAUSE_FEATURE +#define ADVANCED_PAUSE_FEATURE #if ENABLED(ADVANCED_PAUSE_FEATURE) #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. // This short retract is done immediately, before parking the nozzle. #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast. #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload. + #define FILAMENT_CHANGE_UNLOAD_LENGTH 400 // (mm) The length of filament for a complete unload. // For Bowden, the full length of the tube and nozzle. // For direct drive, the full length of the nozzle. // Set to 0 for manual unloading. @@ -2327,7 +2329,7 @@ // 0 to disable start loading and skip to fast load only #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast. #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle. + #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 350 // (mm) Load length of filament, from extruder gear to nozzle. // For Bowden, the full length of the tube and nozzle. // For direct drive, the full length of the nozzle. //#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted. @@ -2349,10 +2351,10 @@ #define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed. #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change. - //#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. - //#define HOME_BEFORE_FILAMENT_CHANGE // If needed, home before parking for filament change + #define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. + #define HOME_BEFORE_FILAMENT_CHANGE // If needed, home before parking for filament change - //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. + #define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) #endif @@ -2493,8 +2495,8 @@ #define INTERPOLATE true #if AXIS_IS_TMC(X) - #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. - #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for sensorless homing + #define X_CURRENT 580 // (mA) RMS current. Multiply by 1.414 for peak current. + #define X_CURRENT_HOME (X_CURRENT/2) // (mA) RMS current for sensorless homing #define X_MICROSTEPS 16 // 0..256 #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... @@ -2511,8 +2513,8 @@ #endif #if AXIS_IS_TMC(Y) - #define Y_CURRENT 800 - #define Y_CURRENT_HOME Y_CURRENT + #define Y_CURRENT 580 + #define Y_CURRENT_HOME (Y_CURRENT/2) #define Y_MICROSTEPS 16 #define Y_RSENSE 0.11 #define Y_CHAIN_POS -1 @@ -2529,7 +2531,7 @@ #endif #if AXIS_IS_TMC(Z) - #define Z_CURRENT 800 + #define Z_CURRENT 580 #define Z_CURRENT_HOME Z_CURRENT #define Z_MICROSTEPS 16 #define Z_RSENSE 0.11 @@ -2565,7 +2567,7 @@ #endif #if AXIS_IS_TMC(E0) - #define E0_CURRENT 800 + #define E0_CURRENT 650 #define E0_MICROSTEPS 16 #define E0_RSENSE 0.11 #define E0_CHAIN_POS -1 @@ -2573,7 +2575,7 @@ #endif #if AXIS_IS_TMC(E1) - #define E1_CURRENT 800 + #define E1_CURRENT 650 #define E1_MICROSTEPS E0_MICROSTEPS #define E1_RSENSE 0.11 #define E1_CHAIN_POS -1 @@ -2719,7 +2721,7 @@ * Define your own with: * { , , hysteresis_start[1..8] } */ - #define CHOPPER_TIMING CHOPPER_DEFAULT_12V // All axes (override below) + #define CHOPPER_TIMING CHOPPER_DEFAULT_24V // All axes (override below) //#define CHOPPER_TIMING_X CHOPPER_TIMING // For X Axes (override below) //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X //#define CHOPPER_TIMING_Y CHOPPER_TIMING // For Y Axes (override below) @@ -2811,16 +2813,16 @@ #if EITHER(SENSORLESS_HOMING, SENSORLESS_PROBING) // TMC2209: 0...255. TMC2130: -64...63 - #define X_STALL_SENSITIVITY 8 + #define X_STALL_SENSITIVITY 75 #define X2_STALL_SENSITIVITY X_STALL_SENSITIVITY - #define Y_STALL_SENSITIVITY 8 + #define Y_STALL_SENSITIVITY 75 #define Y2_STALL_SENSITIVITY Y_STALL_SENSITIVITY //#define Z_STALL_SENSITIVITY 8 //#define Z2_STALL_SENSITIVITY Z_STALL_SENSITIVITY //#define Z3_STALL_SENSITIVITY Z_STALL_SENSITIVITY //#define Z4_STALL_SENSITIVITY Z_STALL_SENSITIVITY //#define SPI_ENDSTOPS // TMC2130 only - //#define IMPROVE_HOMING_RELIABILITY + #define IMPROVE_HOMING_RELIABILITY #endif /** @@ -2839,7 +2841,7 @@ * Beta feature! * Create a 50/50 square wave step pulse optimal for stepper drivers. */ - //#define SQUARE_WAVE_STEPPING + #define SQUARE_WAVE_STEPPING /** * Enable M122 debugging command for TMC stepper drivers. @@ -3526,7 +3528,7 @@ * * Execute certain G-code commands immediately after power-on. */ -//#define STARTUP_COMMANDS "M17 Z" +#define STARTUP_COMMANDS "M17 Z" /** * G-code Macros diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Single Extruder/Configuration.h b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Single Extruder/Configuration.h index 78c2dc9160..4652dce706 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Single Extruder/Configuration.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Single Extruder/Configuration.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Creality/Ender-3/BigTreeTech SKR E3 Turbo/Single Extruder" + /** * Configuration.h * @@ -69,7 +71,7 @@ // @section info // Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes. +#define STRING_CONFIG_H_AUTHOR "(thisiskeithb, Ender-3)" // Who made the changes. //#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) /** @@ -102,14 +104,14 @@ * * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] */ -#define SERIAL_PORT 0 +#define SERIAL_PORT -1 /** * Select a secondary serial port on the board to use for communication with the host. * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] */ -//#define SERIAL_PORT_2 -1 +#define SERIAL_PORT_2 0 /** * Select a third serial port on the board to use for communication with the host. @@ -127,18 +129,18 @@ * * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ -#define BAUDRATE 250000 +#define BAUDRATE 115200 // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH // Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_RAMPS_14_EFB + #define MOTHERBOARD BOARD_BTT_SKR_E3_TURBO #endif // Name displayed in the LCD "Ready" message and Info menu -//#define CUSTOM_MACHINE_NAME "3D Printer" +#define CUSTOM_MACHINE_NAME "Ender-3" // Printer's unique ID, used by some programs to differentiate between machines. // Choose your own or use a service like https://www.uuidgenerator.net/version4 @@ -424,7 +426,7 @@ #define TEMP_SENSOR_5 0 #define TEMP_SENSOR_6 0 #define TEMP_SENSOR_7 0 -#define TEMP_SENSOR_BED 0 +#define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 #define TEMP_SENSOR_COOLER 0 @@ -480,7 +482,7 @@ #define HEATER_5_MAXTEMP 275 #define HEATER_6_MAXTEMP 275 #define HEATER_7_MAXTEMP 275 -#define BED_MAXTEMP 150 +#define BED_MAXTEMP 125 #define CHAMBER_MAXTEMP 60 /** @@ -510,16 +512,17 @@ //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) // Set/get with gcode: M301 E[extruder number, 0-2] + // Creality Ender-3 #if ENABLED(PID_PARAMS_PER_HOTEND) // Specify between 1 and HOTENDS values per array. // If fewer than EXTRUDER values are provided, the last element will be repeated. - #define DEFAULT_Kp_LIST { 22.20, 22.20 } - #define DEFAULT_Ki_LIST { 1.08, 1.08 } - #define DEFAULT_Kd_LIST { 114.00, 114.00 } + #define DEFAULT_Kp_LIST { 21.73, 21.73 } + #define DEFAULT_Ki_LIST { 1.54, 1.54 } + #define DEFAULT_Kd_LIST { 76.55, 76.55 } #else - #define DEFAULT_Kp 22.20 - #define DEFAULT_Ki 1.08 - #define DEFAULT_Kd 114.00 + #define DEFAULT_Kp 21.73 + #define DEFAULT_Ki 1.54 + #define DEFAULT_Kd 76.55 #endif #endif // PIDTEMP @@ -556,11 +559,9 @@ //#define MIN_BED_POWER 0 //#define PID_BED_DEBUG // Sends debug data to the serial port. - // 120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - // from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) - #define DEFAULT_bedKp 10.00 - #define DEFAULT_bedKi .023 - #define DEFAULT_bedKd 305.4 + #define DEFAULT_bedKp 50.71 + #define DEFAULT_bedKi 9.88 + #define DEFAULT_bedKd 173.43 // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. #endif // PIDTEMPBED @@ -634,7 +635,7 @@ * Note: For Bowden Extruders make this large enough to allow load/unload. */ #define PREVENT_LENGTHY_EXTRUDE -#define EXTRUDE_MAXLENGTH 200 +#define EXTRUDE_MAXLENGTH 600 //=========================================================================== //======================== Thermal Runaway Protection ======================= @@ -743,15 +744,15 @@ * TMC5130, TMC5130_STANDALONE, TMC5160, TMC5160_STANDALONE * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'L6474', 'POWERSTEP01', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2160', 'TMC2160_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC2209', 'TMC2209_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE', 'TMC5160', 'TMC5160_STANDALONE'] */ -#define X_DRIVER_TYPE A4988 -#define Y_DRIVER_TYPE A4988 -#define Z_DRIVER_TYPE A4988 +#define X_DRIVER_TYPE TMC2209 +#define Y_DRIVER_TYPE TMC2209 +#define Z_DRIVER_TYPE TMC2209 //#define X2_DRIVER_TYPE A4988 //#define Y2_DRIVER_TYPE A4988 //#define Z2_DRIVER_TYPE A4988 //#define Z3_DRIVER_TYPE A4988 //#define Z4_DRIVER_TYPE A4988 -#define E0_DRIVER_TYPE A4988 +#define E0_DRIVER_TYPE TMC2209 //#define E1_DRIVER_TYPE A4988 //#define E2_DRIVER_TYPE A4988 //#define E3_DRIVER_TYPE A4988 @@ -806,14 +807,14 @@ * Override with M92 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 500 } +#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 93 } /** * Default Max Feed Rate (mm/s) * Override with M203 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 } +#define DEFAULT_MAX_FEEDRATE { 500, 500, 5, 25 } //#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 #if ENABLED(LIMITED_MAX_FR_EDITING) @@ -826,7 +827,7 @@ * Override with M201 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 } +#define DEFAULT_MAX_ACCELERATION { 500, 500, 100, 5000 } //#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 #if ENABLED(LIMITED_MAX_ACCEL_EDITING) @@ -841,9 +842,9 @@ * M204 R Retract Acceleration * M204 T Travel Acceleration */ -#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves +#define DEFAULT_ACCELERATION 500 // X, Y, Z and E acceleration for printing moves +#define DEFAULT_RETRACT_ACCELERATION 500 // E acceleration for retracts +#define DEFAULT_TRAVEL_ACCELERATION 500 // X, Y, Z acceleration for travel (non printing) moves /** * Default Jerk limits (mm/s) @@ -877,7 +878,7 @@ * https://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html */ #if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.013 // (mm) Distance from real junction edge + #define JUNCTION_DEVIATION_MM 0.08 // (mm) Distance from real junction edge #define JD_HANDLE_SMALL_SEGMENTS // Use curvature estimation instead of just the junction angle // for small segments (< 1mm) with large junction angles (> 135°). #endif @@ -890,7 +891,7 @@ * * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained */ -//#define S_CURVE_ACCELERATION +#define S_CURVE_ACCELERATION //=========================================================================== //============================= Z Probe Options ============================= @@ -1190,14 +1191,14 @@ // @section machine // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR false +#define INVERT_X_DIR true #define INVERT_Y_DIR true #define INVERT_Z_DIR false // @section extruder // For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR false +#define INVERT_E0_DIR true #define INVERT_E1_DIR false #define INVERT_E2_DIR false #define INVERT_E3_DIR false @@ -1232,8 +1233,8 @@ // @section machine // The size of the printable area -#define X_BED_SIZE 200 -#define Y_BED_SIZE 200 +#define X_BED_SIZE 235 +#define Y_BED_SIZE 235 // Travel limits (mm) after homing, corresponding to endstop positions. #define X_MIN_POS 0 @@ -1241,7 +1242,7 @@ #define Z_MIN_POS 0 #define X_MAX_POS X_BED_SIZE #define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 200 +#define Z_MAX_POS 250 /** * Software Endstops @@ -1389,7 +1390,7 @@ //#define AUTO_BED_LEVELING_LINEAR //#define AUTO_BED_LEVELING_BILINEAR //#define AUTO_BED_LEVELING_UBL -//#define MESH_BED_LEVELING +#define MESH_BED_LEVELING /** * Normally G28 leaves leveling disabled on completion. Enable one of @@ -1454,7 +1455,7 @@ #if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR) // Set the number of grid points per dimension. - #define GRID_MAX_POINTS_X 3 + #define GRID_MAX_POINTS_X 5 #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X // Probe along the Y axis, advancing X after each column @@ -1464,7 +1465,7 @@ // Beyond the probed grid, continue the implied tilt? // Default is to maintain the height of the nearest edge. - //#define EXTRAPOLATE_BEYOND_GRID + #define EXTRAPOLATE_BEYOND_GRID // // Experimental Subdivision of the grid by Catmull-Rom method. @@ -1518,16 +1519,16 @@ * Add a bed leveling sub-menu for ABL or MBL. * Include a guided procedure if manual probing is enabled. */ -//#define LCD_BED_LEVELING +#define LCD_BED_LEVELING #if ENABLED(LCD_BED_LEVELING) #define MESH_EDIT_Z_STEP 0.025 // (mm) Step size while manually probing Z axis. #define LCD_PROBE_Z_RANGE 4 // (mm) Z Range centered on Z_MIN_POS for LCD Z adjustment - //#define MESH_EDIT_MENU // Add a menu to edit mesh points + #define MESH_EDIT_MENU // Add a menu to edit mesh points #endif // Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS +#define LEVEL_BED_CORNERS #if ENABLED(LEVEL_BED_CORNERS) #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets @@ -1595,7 +1596,7 @@ #endif // Homing speeds (mm/min) -#define HOMING_FEEDRATE_MM_M { (50*60), (50*60), (4*60) } +#define HOMING_FEEDRATE_MM_M { (20*60), (20*60), (4*60) } // Validate that endstops are triggered on homing moves #define VALIDATE_HOMING_ENDSTOPS @@ -1672,12 +1673,12 @@ * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) */ -//#define EEPROM_SETTINGS // Persistent storage with M500 and M501 +#define EEPROM_SETTINGS // Persistent storage with M500 and M501 //#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. #define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load #if ENABLED(EEPROM_SETTINGS) - //#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. + #define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. #endif // @@ -1706,16 +1707,16 @@ // Preheat Constants - Up to 5 are supported without changes // #define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 180 -#define PREHEAT_1_TEMP_BED 70 +#define PREHEAT_1_TEMP_HOTEND 185 +#define PREHEAT_1_TEMP_BED 45 #define PREHEAT_1_TEMP_CHAMBER 35 -#define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 +#define PREHEAT_1_FAN_SPEED 255 // Value from 0 to 255 #define PREHEAT_2_LABEL "ABS" #define PREHEAT_2_TEMP_HOTEND 240 #define PREHEAT_2_TEMP_BED 110 #define PREHEAT_2_TEMP_CHAMBER 35 -#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 +#define PREHEAT_2_FAN_SPEED 255 // Value from 0 to 255 /** * Nozzle Park @@ -1728,7 +1729,7 @@ * P1 Raise the nozzle always to Z-park height. * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. */ -//#define NOZZLE_PARK_FEATURE +#define NOZZLE_PARK_FEATURE #if ENABLED(NOZZLE_PARK_FEATURE) // Specify a park position as { X, Y, Z_raise } @@ -1936,7 +1937,7 @@ * SD Card support is disabled by default. If your controller has an SD slot, * you must uncomment the following option or it won't work. */ -//#define SDSUPPORT +#define SDSUPPORT /** * SD CARD: ENABLE CRC @@ -2006,7 +2007,7 @@ // // Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. // -//#define INDIVIDUAL_AXIS_HOMING_MENU +#define INDIVIDUAL_AXIS_HOMING_MENU // // SPEAKER/BUZZER @@ -2014,7 +2015,7 @@ // If you have a speaker that can produce tones, enable it here. // By default Marlin assumes you have a buzzer with a fixed frequency. // -//#define SPEAKER +#define SPEAKER // // The duration and frequency for the UI feedback sound. @@ -2287,7 +2288,7 @@ // This is RAMPS-compatible using a single 10-pin connector. // (For CR-10 owners who want to replace the Melzi Creality board but retain the display) // -//#define CR10_STOCKDISPLAY +#define CR10_STOCKDISPLAY // // Ender-2 OEM display, a variant of the MKS_MINI_12864 diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Single Extruder/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Single Extruder/Configuration_adv.h index 5335fa012a..da9ccfae77 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Single Extruder/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Single Extruder/Configuration_adv.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Creality/Ender-3/BigTreeTech SKR E3 Turbo/Single Extruder" + /** * Configuration_adv.h * @@ -479,7 +481,7 @@ // When first starting the main fan, run it at full speed for the // given number of milliseconds. This gets the fan spinning reliably // before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) -//#define FAN_KICKSTART_TIME 100 +#define FAN_KICKSTART_TIME 800 // Some coolers may require a non-zero "off" state. //#define FAN_OFF_PWM 1 @@ -540,7 +542,7 @@ * Multiple extruders can be assigned to the same pin in which case * the fan will turn on when any selected extruder is above the threshold. */ -#define E0_AUTO_FAN_PIN -1 +#define E0_AUTO_FAN_PIN FAN1_PIN #define E1_AUTO_FAN_PIN -1 #define E2_AUTO_FAN_PIN -1 #define E3_AUTO_FAN_PIN -1 @@ -736,12 +738,12 @@ //#define SENSORLESS_BACKOFF_MM { 2, 2 } // (mm) Backoff from endstops before sensorless homing -#define HOMING_BUMP_MM { 5, 5, 2 } // (mm) Backoff from endstops after first bump +#define HOMING_BUMP_MM { 0, 0, 2 } // (mm) Backoff from endstops after first bump #define HOMING_BUMP_DIVISOR { 2, 2, 4 } // Re-Bump Speed Divisor (Divides the Homing Feedrate) //#define HOMING_BACKOFF_POST_MM { 2, 2, 2 } // (mm) Backoff from endstops after homing -//#define QUICK_HOME // If G28 contains XY do a diagonal move first +#define QUICK_HOME // If G28 contains XY do a diagonal move first //#define HOME_Y_BEFORE_X // If G28 contains XY home Y before X //#define HOME_Z_FIRST // Home Z first. Requires a Z-MIN endstop (not a probe). //#define CODEPENDENT_XY_HOMING // If X/Y can't home without homing Y/X first @@ -1175,7 +1177,7 @@ #endif // Include a page of printer information in the LCD Main Menu - //#define LCD_INFO_MENU + #define LCD_INFO_MENU #if ENABLED(LCD_INFO_MENU) //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages #endif @@ -1229,13 +1231,13 @@ #endif // Scroll a longer status message into view - //#define STATUS_MESSAGE_SCROLLING + #define STATUS_MESSAGE_SCROLLING // On the Info Screen, display XY with one decimal place when possible //#define LCD_DECIMAL_SMALL_XY // Add an 'M73' G-code to set the current percentage - //#define LCD_SET_PROGRESS_MANUALLY + #define LCD_SET_PROGRESS_MANUALLY // Show the E position (filament used) during printing //#define LCD_SHOW_E_TOTAL @@ -1361,16 +1363,16 @@ * - SDSORT_CACHE_NAMES will retain the sorted file listing in RAM. (Expensive!) * - SDSORT_DYNAMIC_RAM only uses RAM when the SD menu is visible. (Use with caution!) */ - //#define SDCARD_SORT_ALPHA + #define SDCARD_SORT_ALPHA // SD Card Sorting options #if ENABLED(SDCARD_SORT_ALPHA) #define SDSORT_LIMIT 40 // Maximum number of sorted items (10-256). Costs 27 bytes each. #define FOLDER_SORTING -1 // -1=above 0=none 1=below #define SDSORT_GCODE false // Allow turning sorting on/off with LCD and M34 G-code. - #define SDSORT_USES_RAM false // Pre-allocate a static array for faster pre-sorting. + #define SDSORT_USES_RAM true // Pre-allocate a static array for faster pre-sorting. #define SDSORT_USES_STACK false // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.) - #define SDSORT_CACHE_NAMES false // Keep sorted items in RAM longer for speedy performance. Most expensive option. + #define SDSORT_CACHE_NAMES true // Keep sorted items in RAM longer for speedy performance. Most expensive option. #define SDSORT_DYNAMIC_RAM false // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use! #define SDSORT_CACHE_VFATS 2 // Maximum number of 13-byte VFAT entries to use for sorting. // Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM. @@ -1381,10 +1383,10 @@ //#define UTF_FILENAME_SUPPORT // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT + #define LONG_FILENAME_HOST_SUPPORT // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES + #define SCROLL_LONG_FILENAMES // Leave the heaters on after Stop Print (not recommended!) //#define SD_ABORT_NO_COOLDOWN @@ -1476,7 +1478,7 @@ * * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] */ - //#define SDCARD_CONNECTION LCD + #define SDCARD_CONNECTION ONBOARD // Enable if SD detect is rendered useless (e.g., by using an SD extender) //#define NO_SD_DETECT @@ -1790,7 +1792,7 @@ * * Warning: Does not respect endstops! */ -//#define BABYSTEPPING +#define BABYSTEPPING #if ENABLED(BABYSTEPPING) //#define INTEGRATED_BABYSTEPPING // EXPERIMENTAL integration of babystepping into the Stepper ISR //#define BABYSTEP_WITHOUT_HOMING @@ -1801,7 +1803,7 @@ #define BABYSTEP_MULTIPLICATOR_Z 1 // (steps or mm) Steps or millimeter distance for each Z babystep #define BABYSTEP_MULTIPLICATOR_XY 1 // (steps or mm) Steps or millimeter distance for each XY babystep - //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. + #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. // Note: Extra time may be added to mitigate controller latency. @@ -1837,12 +1839,12 @@ * * See https://marlinfw.org/docs/features/lin_advance.html for full instructions. */ -//#define LIN_ADVANCE +#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) //#define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants - #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed + #define LIN_ADVANCE_K 0.0 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // If enabled, this will generate debug information output over USB. - //#define EXPERIMENTAL_SCURVE // Enable this option to permit S-Curve Acceleration + #define EXPERIMENTAL_SCURVE // Enable this option to permit S-Curve Acceleration #endif // @section leveling @@ -2141,7 +2143,7 @@ * Currently handles M108, M112, M410, M876 * NOTE: Not yet implemented for all platforms. */ -//#define EMERGENCY_PARSER +#define EMERGENCY_PARSER /** * Realtime Reporting (requires EMERGENCY_PARSER) @@ -2311,14 +2313,14 @@ * * Enable PARK_HEAD_ON_PAUSE to add the G-code M125 Pause and Park. */ -//#define ADVANCED_PAUSE_FEATURE +#define ADVANCED_PAUSE_FEATURE #if ENABLED(ADVANCED_PAUSE_FEATURE) #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. // This short retract is done immediately, before parking the nozzle. #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast. #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload. + #define FILAMENT_CHANGE_UNLOAD_LENGTH 400 // (mm) The length of filament for a complete unload. // For Bowden, the full length of the tube and nozzle. // For direct drive, the full length of the nozzle. // Set to 0 for manual unloading. @@ -2327,7 +2329,7 @@ // 0 to disable start loading and skip to fast load only #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast. #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle. + #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 350 // (mm) Load length of filament, from extruder gear to nozzle. // For Bowden, the full length of the tube and nozzle. // For direct drive, the full length of the nozzle. //#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted. @@ -2349,10 +2351,10 @@ #define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed. #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change. - //#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. - //#define HOME_BEFORE_FILAMENT_CHANGE // If needed, home before parking for filament change + #define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. + #define HOME_BEFORE_FILAMENT_CHANGE // If needed, home before parking for filament change - //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. + #define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) #endif @@ -2493,8 +2495,8 @@ #define INTERPOLATE true #if AXIS_IS_TMC(X) - #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. - #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for sensorless homing + #define X_CURRENT 580 // (mA) RMS current. Multiply by 1.414 for peak current. + #define X_CURRENT_HOME (X_CURRENT/2) // (mA) RMS current for sensorless homing #define X_MICROSTEPS 16 // 0..256 #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... @@ -2511,8 +2513,8 @@ #endif #if AXIS_IS_TMC(Y) - #define Y_CURRENT 800 - #define Y_CURRENT_HOME Y_CURRENT + #define Y_CURRENT 580 + #define Y_CURRENT_HOME (Y_CURRENT/2) #define Y_MICROSTEPS 16 #define Y_RSENSE 0.11 #define Y_CHAIN_POS -1 @@ -2529,7 +2531,7 @@ #endif #if AXIS_IS_TMC(Z) - #define Z_CURRENT 800 + #define Z_CURRENT 580 #define Z_CURRENT_HOME Z_CURRENT #define Z_MICROSTEPS 16 #define Z_RSENSE 0.11 @@ -2565,7 +2567,7 @@ #endif #if AXIS_IS_TMC(E0) - #define E0_CURRENT 800 + #define E0_CURRENT 650 #define E0_MICROSTEPS 16 #define E0_RSENSE 0.11 #define E0_CHAIN_POS -1 @@ -2573,7 +2575,7 @@ #endif #if AXIS_IS_TMC(E1) - #define E1_CURRENT 800 + #define E1_CURRENT 650 #define E1_MICROSTEPS E0_MICROSTEPS #define E1_RSENSE 0.11 #define E1_CHAIN_POS -1 @@ -2719,7 +2721,7 @@ * Define your own with: * { , , hysteresis_start[1..8] } */ - #define CHOPPER_TIMING CHOPPER_DEFAULT_12V // All axes (override below) + #define CHOPPER_TIMING CHOPPER_DEFAULT_24V // All axes (override below) //#define CHOPPER_TIMING_X CHOPPER_TIMING // For X Axes (override below) //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X //#define CHOPPER_TIMING_Y CHOPPER_TIMING // For Y Axes (override below) @@ -2811,16 +2813,16 @@ #if EITHER(SENSORLESS_HOMING, SENSORLESS_PROBING) // TMC2209: 0...255. TMC2130: -64...63 - #define X_STALL_SENSITIVITY 8 + #define X_STALL_SENSITIVITY 75 #define X2_STALL_SENSITIVITY X_STALL_SENSITIVITY - #define Y_STALL_SENSITIVITY 8 + #define Y_STALL_SENSITIVITY 75 #define Y2_STALL_SENSITIVITY Y_STALL_SENSITIVITY //#define Z_STALL_SENSITIVITY 8 //#define Z2_STALL_SENSITIVITY Z_STALL_SENSITIVITY //#define Z3_STALL_SENSITIVITY Z_STALL_SENSITIVITY //#define Z4_STALL_SENSITIVITY Z_STALL_SENSITIVITY //#define SPI_ENDSTOPS // TMC2130 only - //#define IMPROVE_HOMING_RELIABILITY + #define IMPROVE_HOMING_RELIABILITY #endif /** @@ -2839,7 +2841,7 @@ * Beta feature! * Create a 50/50 square wave step pulse optimal for stepper drivers. */ - //#define SQUARE_WAVE_STEPPING + #define SQUARE_WAVE_STEPPING /** * Enable M122 debugging command for TMC stepper drivers. diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR E3-DIP V1.1/Configuration.h b/config/examples/Creality/Ender-3/BigTreeTech SKR E3-DIP V1.1/Configuration.h index 78c2dc9160..7f28b98ba3 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR E3-DIP V1.1/Configuration.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR E3-DIP V1.1/Configuration.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Creality/Ender-3/BigTreeTech SKR E3-DIP V1.1" + /** * Configuration.h * @@ -69,7 +71,7 @@ // @section info // Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes. +#define STRING_CONFIG_H_AUTHOR "(alfonder, Ender-3)" // Who made the changes. //#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) /** @@ -87,10 +89,10 @@ #define SHOW_BOOTSCREEN // Show the bitmap in Marlin/_Bootscreen.h on startup. -//#define SHOW_CUSTOM_BOOTSCREEN +#define SHOW_CUSTOM_BOOTSCREEN // Show the bitmap in Marlin/_Statusscreen.h on the status screen. -//#define CUSTOM_STATUS_SCREEN_IMAGE +#define CUSTOM_STATUS_SCREEN_IMAGE // @section machine @@ -102,14 +104,14 @@ * * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] */ -#define SERIAL_PORT 0 +#define SERIAL_PORT 2 /** * Select a secondary serial port on the board to use for communication with the host. * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] */ -//#define SERIAL_PORT_2 -1 +#define SERIAL_PORT_2 -1 /** * Select a third serial port on the board to use for communication with the host. @@ -127,18 +129,18 @@ * * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ -#define BAUDRATE 250000 +#define BAUDRATE 115200 // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH // Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_RAMPS_14_EFB + #define MOTHERBOARD BOARD_BTT_SKR_E3_DIP #endif // Name displayed in the LCD "Ready" message and Info menu -//#define CUSTOM_MACHINE_NAME "3D Printer" +#define CUSTOM_MACHINE_NAME "Ender-3" // Printer's unique ID, used by some programs to differentiate between machines. // Choose your own or use a service like https://www.uuidgenerator.net/version4 @@ -424,7 +426,7 @@ #define TEMP_SENSOR_5 0 #define TEMP_SENSOR_6 0 #define TEMP_SENSOR_7 0 -#define TEMP_SENSOR_BED 0 +#define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 #define TEMP_SENSOR_COOLER 0 @@ -480,7 +482,7 @@ #define HEATER_5_MAXTEMP 275 #define HEATER_6_MAXTEMP 275 #define HEATER_7_MAXTEMP 275 -#define BED_MAXTEMP 150 +#define BED_MAXTEMP 125 #define CHAMBER_MAXTEMP 60 /** @@ -517,9 +519,9 @@ #define DEFAULT_Ki_LIST { 1.08, 1.08 } #define DEFAULT_Kd_LIST { 114.00, 114.00 } #else - #define DEFAULT_Kp 22.20 - #define DEFAULT_Ki 1.08 - #define DEFAULT_Kd 114.00 + #define DEFAULT_Kp 21.73 + #define DEFAULT_Ki 1.54 + #define DEFAULT_Kd 76.55 #endif #endif // PIDTEMP @@ -558,9 +560,9 @@ // 120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) // from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) - #define DEFAULT_bedKp 10.00 - #define DEFAULT_bedKi .023 - #define DEFAULT_bedKd 305.4 + #define DEFAULT_bedKp 50.71 + #define DEFAULT_bedKi 9.88 + #define DEFAULT_bedKd 173.43 // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. #endif // PIDTEMPBED @@ -634,7 +636,7 @@ * Note: For Bowden Extruders make this large enough to allow load/unload. */ #define PREVENT_LENGTHY_EXTRUDE -#define EXTRUDE_MAXLENGTH 200 +#define EXTRUDE_MAXLENGTH 600 //=========================================================================== //======================== Thermal Runaway Protection ======================= @@ -743,15 +745,15 @@ * TMC5130, TMC5130_STANDALONE, TMC5160, TMC5160_STANDALONE * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'L6474', 'POWERSTEP01', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2160', 'TMC2160_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC2209', 'TMC2209_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE', 'TMC5160', 'TMC5160_STANDALONE'] */ -#define X_DRIVER_TYPE A4988 -#define Y_DRIVER_TYPE A4988 -#define Z_DRIVER_TYPE A4988 +#define X_DRIVER_TYPE TMC2208 +#define Y_DRIVER_TYPE TMC2208 +#define Z_DRIVER_TYPE TMC2208 //#define X2_DRIVER_TYPE A4988 //#define Y2_DRIVER_TYPE A4988 //#define Z2_DRIVER_TYPE A4988 //#define Z3_DRIVER_TYPE A4988 //#define Z4_DRIVER_TYPE A4988 -#define E0_DRIVER_TYPE A4988 +#define E0_DRIVER_TYPE TMC2208 //#define E1_DRIVER_TYPE A4988 //#define E2_DRIVER_TYPE A4988 //#define E3_DRIVER_TYPE A4988 @@ -762,7 +764,7 @@ // Enable this feature if all enabled endstop pins are interrupt-capable. // This will remove the need to poll the interrupt pins, saving many CPU cycles. -//#define ENDSTOP_INTERRUPTS_FEATURE +#define ENDSTOP_INTERRUPTS_FEATURE /** * Endstop Noise Threshold @@ -779,7 +781,7 @@ //#define ENDSTOP_NOISE_THRESHOLD 2 // Check for stuck or disconnected endstops during homing moves. -//#define DETECT_BROKEN_ENDSTOP +#define DETECT_BROKEN_ENDSTOP //============================================================================= //============================== Movement Settings ============================ @@ -806,14 +808,14 @@ * Override with M92 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 500 } +#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 95 } /** * Default Max Feed Rate (mm/s) * Override with M203 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 } +#define DEFAULT_MAX_FEEDRATE { 500, 500, 5, 25 } //#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 #if ENABLED(LIMITED_MAX_FR_EDITING) @@ -826,7 +828,7 @@ * Override with M201 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 } +#define DEFAULT_MAX_ACCELERATION { 500, 500, 100, 5000 } //#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 #if ENABLED(LIMITED_MAX_ACCEL_EDITING) @@ -841,9 +843,9 @@ * M204 R Retract Acceleration * M204 T Travel Acceleration */ -#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves +#define DEFAULT_ACCELERATION 500 // X, Y, Z and E acceleration for printing moves +#define DEFAULT_RETRACT_ACCELERATION 500 // E acceleration for retracts +#define DEFAULT_TRAVEL_ACCELERATION 500 // X, Y, Z acceleration for travel (non printing) moves /** * Default Jerk limits (mm/s) @@ -877,7 +879,7 @@ * https://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html */ #if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.013 // (mm) Distance from real junction edge + #define JUNCTION_DEVIATION_MM 0.08 // (mm) Distance from real junction edge #define JD_HANDLE_SMALL_SEGMENTS // Use curvature estimation instead of just the junction angle // for small segments (< 1mm) with large junction angles (> 135°). #endif @@ -890,7 +892,7 @@ * * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained */ -//#define S_CURVE_ACCELERATION +#define S_CURVE_ACCELERATION //=========================================================================== //============================= Z Probe Options ============================= @@ -1185,14 +1187,14 @@ // @section extruder #define DISABLE_E false // Disable the extruder when not stepping -#define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled +//#define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled // @section machine // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR false -#define INVERT_Y_DIR true -#define INVERT_Z_DIR false +#define INVERT_Y_DIR false +#define INVERT_Z_DIR true // @section extruder @@ -1232,8 +1234,8 @@ // @section machine // The size of the printable area -#define X_BED_SIZE 200 -#define Y_BED_SIZE 200 +#define X_BED_SIZE 235 +#define Y_BED_SIZE 235 // Travel limits (mm) after homing, corresponding to endstop positions. #define X_MIN_POS 0 @@ -1241,7 +1243,7 @@ #define Z_MIN_POS 0 #define X_MAX_POS X_BED_SIZE #define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 200 +#define Z_MAX_POS 250 /** * Software Endstops @@ -1527,7 +1529,7 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS +#define LEVEL_BED_CORNERS #if ENABLED(LEVEL_BED_CORNERS) #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets @@ -1595,7 +1597,7 @@ #endif // Homing speeds (mm/min) -#define HOMING_FEEDRATE_MM_M { (50*60), (50*60), (4*60) } +#define HOMING_FEEDRATE_MM_M { (20*60), (20*60), (4*60) } // Validate that endstops are triggered on homing moves #define VALIDATE_HOMING_ENDSTOPS @@ -1672,12 +1674,12 @@ * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) */ -//#define EEPROM_SETTINGS // Persistent storage with M500 and M501 +#define EEPROM_SETTINGS // Persistent storage with M500 and M501 //#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. #define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load #if ENABLED(EEPROM_SETTINGS) - //#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. + #define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. #endif // @@ -1706,16 +1708,16 @@ // Preheat Constants - Up to 5 are supported without changes // #define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 180 -#define PREHEAT_1_TEMP_BED 70 +#define PREHEAT_1_TEMP_HOTEND 200 +#define PREHEAT_1_TEMP_BED 50 #define PREHEAT_1_TEMP_CHAMBER 35 -#define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 +#define PREHEAT_1_FAN_SPEED 255 // Value from 0 to 255 #define PREHEAT_2_LABEL "ABS" #define PREHEAT_2_TEMP_HOTEND 240 #define PREHEAT_2_TEMP_BED 110 #define PREHEAT_2_TEMP_CHAMBER 35 -#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 +#define PREHEAT_2_FAN_SPEED 255 // Value from 0 to 255 /** * Nozzle Park @@ -1728,7 +1730,7 @@ * P1 Raise the nozzle always to Z-park height. * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. */ -//#define NOZZLE_PARK_FEATURE +#define NOZZLE_PARK_FEATURE #if ENABLED(NOZZLE_PARK_FEATURE) // Specify a park position as { X, Y, Z_raise } @@ -1936,14 +1938,14 @@ * SD Card support is disabled by default. If your controller has an SD slot, * you must uncomment the following option or it won't work. */ -//#define SDSUPPORT +#define SDSUPPORT /** * SD CARD: ENABLE CRC * * Use CRC checks and retries on the SD communication. */ -//#define SD_CHECK_AND_RETRY +#define SD_CHECK_AND_RETRY /** * LCD Menu Items @@ -2287,7 +2289,7 @@ // This is RAMPS-compatible using a single 10-pin connector. // (For CR-10 owners who want to replace the Melzi Creality board but retain the display) // -//#define CR10_STOCKDISPLAY +#define CR10_STOCKDISPLAY // // Ender-2 OEM display, a variant of the MKS_MINI_12864 @@ -2618,7 +2620,7 @@ // Use software PWM to drive the fan, as for the heaters. This uses a very low frequency // which is not as annoying as with the hardware PWM. On the other hand, if this frequency // is too low, you should also increment SOFT_PWM_SCALE. -//#define FAN_SOFT_PWM +#define FAN_SOFT_PWM // Incrementing this by 1 will double the software PWM frequency, // affecting heaters, and the fan if FAN_SOFT_PWM is enabled. diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR E3-DIP V1.1/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech SKR E3-DIP V1.1/Configuration_adv.h index 5335fa012a..b5b2526730 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR E3-DIP V1.1/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR E3-DIP V1.1/Configuration_adv.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Creality/Ender-3/BigTreeTech SKR E3-DIP V1.1" + /** * Configuration_adv.h * @@ -267,12 +269,12 @@ */ #if ENABLED(THERMAL_PROTECTION_BED) #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_HYSTERESIS 3 // Degrees Celsius /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds + #define WATCH_BED_TEMP_PERIOD 90 // Seconds #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius #endif @@ -741,7 +743,7 @@ //#define HOMING_BACKOFF_POST_MM { 2, 2, 2 } // (mm) Backoff from endstops after homing -//#define QUICK_HOME // If G28 contains XY do a diagonal move first +#define QUICK_HOME // If G28 contains XY do a diagonal move first //#define HOME_Y_BEFORE_X // If G28 contains XY home Y before X //#define HOME_Z_FIRST // Home Z first. Requires a Z-MIN endstop (not a probe). //#define CODEPENDENT_XY_HOMING // If X/Y can't home without homing Y/X first @@ -867,7 +869,7 @@ // On a 300mm bed a 5% grade would give a misalignment of ~1.5cm #define G34_MAX_GRADE 5 // (%) Maximum incline that G34 will handle - #define Z_STEPPER_ALIGN_ITERATIONS 5 // Number of iterations to apply during alignment + #define Z_STEPPER_ALIGN_ITERATIONS 3 // Number of iterations to apply during alignment #define Z_STEPPER_ALIGN_ACC 0.02 // Stop iterating early if the accuracy is better than this #define RESTORE_LEVELING_AFTER_G34 // Restore leveling after G34 is done? // After G34, re-home Z (G28 Z) or just calculate it from the last probe heights? @@ -1175,7 +1177,7 @@ #endif // Include a page of printer information in the LCD Main Menu - //#define LCD_INFO_MENU + #define LCD_INFO_MENU #if ENABLED(LCD_INFO_MENU) //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages #endif @@ -1229,13 +1231,13 @@ #endif // Scroll a longer status message into view - //#define STATUS_MESSAGE_SCROLLING + #define STATUS_MESSAGE_SCROLLING // On the Info Screen, display XY with one decimal place when possible //#define LCD_DECIMAL_SMALL_XY // Add an 'M73' G-code to set the current percentage - //#define LCD_SET_PROGRESS_MANUALLY + #define LCD_SET_PROGRESS_MANUALLY // Show the E position (filament used) during printing //#define LCD_SHOW_E_TOTAL @@ -1278,7 +1280,7 @@ // The standard SD detect circuit reads LOW when media is inserted and HIGH when empty. // Enable this option and set to HIGH if your SD cards are incorrectly detected. - //#define SD_DETECT_STATE HIGH + #define SD_DETECT_STATE HIGH //#define SD_IGNORE_AT_STARTUP // Don't mount the SD card when starting up //#define SDCARD_READONLY // Read-only SD card (to save over 2K of flash) @@ -1361,16 +1363,16 @@ * - SDSORT_CACHE_NAMES will retain the sorted file listing in RAM. (Expensive!) * - SDSORT_DYNAMIC_RAM only uses RAM when the SD menu is visible. (Use with caution!) */ - //#define SDCARD_SORT_ALPHA + #define SDCARD_SORT_ALPHA // SD Card Sorting options #if ENABLED(SDCARD_SORT_ALPHA) #define SDSORT_LIMIT 40 // Maximum number of sorted items (10-256). Costs 27 bytes each. #define FOLDER_SORTING -1 // -1=above 0=none 1=below #define SDSORT_GCODE false // Allow turning sorting on/off with LCD and M34 G-code. - #define SDSORT_USES_RAM false // Pre-allocate a static array for faster pre-sorting. + #define SDSORT_USES_RAM true // Pre-allocate a static array for faster pre-sorting. #define SDSORT_USES_STACK false // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.) - #define SDSORT_CACHE_NAMES false // Keep sorted items in RAM longer for speedy performance. Most expensive option. + #define SDSORT_CACHE_NAMES true // Keep sorted items in RAM longer for speedy performance. Most expensive option. #define SDSORT_DYNAMIC_RAM false // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use! #define SDSORT_CACHE_VFATS 2 // Maximum number of 13-byte VFAT entries to use for sorting. // Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM. @@ -1381,10 +1383,10 @@ //#define UTF_FILENAME_SUPPORT // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT + #define LONG_FILENAME_HOST_SUPPORT // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES + #define SCROLL_LONG_FILENAMES // Leave the heaters on after Stop Print (not recommended!) //#define SD_ABORT_NO_COOLDOWN @@ -1790,7 +1792,7 @@ * * Warning: Does not respect endstops! */ -//#define BABYSTEPPING +#define BABYSTEPPING #if ENABLED(BABYSTEPPING) //#define INTEGRATED_BABYSTEPPING // EXPERIMENTAL integration of babystepping into the Stepper ISR //#define BABYSTEP_WITHOUT_HOMING @@ -1801,7 +1803,7 @@ #define BABYSTEP_MULTIPLICATOR_Z 1 // (steps or mm) Steps or millimeter distance for each Z babystep #define BABYSTEP_MULTIPLICATOR_XY 1 // (steps or mm) Steps or millimeter distance for each XY babystep - //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. + #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. // Note: Extra time may be added to mitigate controller latency. @@ -1837,12 +1839,12 @@ * * See https://marlinfw.org/docs/features/lin_advance.html for full instructions. */ -//#define LIN_ADVANCE +#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) //#define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants - #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed + #define LIN_ADVANCE_K 0.00 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // If enabled, this will generate debug information output over USB. - //#define EXPERIMENTAL_SCURVE // Enable this option to permit S-Curve Acceleration + #define EXPERIMENTAL_SCURVE // Enable this option to permit S-Curve Acceleration #endif // @section leveling @@ -1982,7 +1984,7 @@ // // G2/G3 Arc Support // -#define ARC_SUPPORT // Disable this feature to save ~3226 bytes +//#define ARC_SUPPORT // Disable this feature to save ~3226 bytes #if ENABLED(ARC_SUPPORT) #define MM_PER_ARC_SEGMENT 1 // (mm) Length (or minimum length) of each arc segment //#define ARC_SEGMENTS_PER_R 1 // Max segment length, MM_PER = Min @@ -2082,16 +2084,16 @@ #if BOTH(SDSUPPORT, DIRECT_STEPPING) #define BLOCK_BUFFER_SIZE 8 #elif ENABLED(SDSUPPORT) - #define BLOCK_BUFFER_SIZE 16 + #define BLOCK_BUFFER_SIZE 32 #else - #define BLOCK_BUFFER_SIZE 16 + #define BLOCK_BUFFER_SIZE 32 #endif // @section serial // The ASCII buffer for serial input #define MAX_CMD_SIZE 96 -#define BUFSIZE 4 +#define BUFSIZE 32 // Transmission to Host Buffer Size // To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0. @@ -2100,7 +2102,7 @@ // For debug-echo: 128 bytes for the optimal speed. // Other output doesn't need to be that speedy. // :[0, 2, 4, 8, 16, 32, 64, 128, 256] -#define TX_BUFFER_SIZE 0 +#define TX_BUFFER_SIZE 32 // Host Receive Buffer Size // Without XON/XOFF flow control (see SERIAL_XON_XOFF below) 32 bytes should be enough. @@ -2311,14 +2313,14 @@ * * Enable PARK_HEAD_ON_PAUSE to add the G-code M125 Pause and Park. */ -//#define ADVANCED_PAUSE_FEATURE +#define ADVANCED_PAUSE_FEATURE #if ENABLED(ADVANCED_PAUSE_FEATURE) #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. // This short retract is done immediately, before parking the nozzle. #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast. #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload. + #define FILAMENT_CHANGE_UNLOAD_LENGTH 400 // (mm) The length of filament for a complete unload. // For Bowden, the full length of the tube and nozzle. // For direct drive, the full length of the nozzle. // Set to 0 for manual unloading. @@ -2327,7 +2329,7 @@ // 0 to disable start loading and skip to fast load only #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast. #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle. + #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 350 // (mm) Load length of filament, from extruder gear to nozzle. // For Bowden, the full length of the tube and nozzle. // For direct drive, the full length of the nozzle. //#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted. @@ -2352,7 +2354,7 @@ //#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. //#define HOME_BEFORE_FILAMENT_CHANGE // If needed, home before parking for filament change - //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. + #define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) #endif @@ -2493,7 +2495,7 @@ #define INTERPOLATE true #if AXIS_IS_TMC(X) - #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. + #define X_CURRENT 530 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for sensorless homing #define X_MICROSTEPS 16 // 0..256 #define X_RSENSE 0.11 @@ -2511,7 +2513,7 @@ #endif #if AXIS_IS_TMC(Y) - #define Y_CURRENT 800 + #define Y_CURRENT 530 #define Y_CURRENT_HOME Y_CURRENT #define Y_MICROSTEPS 16 #define Y_RSENSE 0.11 @@ -2529,7 +2531,7 @@ #endif #if AXIS_IS_TMC(Z) - #define Z_CURRENT 800 + #define Z_CURRENT 530 #define Z_CURRENT_HOME Z_CURRENT #define Z_MICROSTEPS 16 #define Z_RSENSE 0.11 @@ -2565,7 +2567,7 @@ #endif #if AXIS_IS_TMC(E0) - #define E0_CURRENT 800 + #define E0_CURRENT 690 #define E0_MICROSTEPS 16 #define E0_RSENSE 0.11 #define E0_CHAIN_POS -1 @@ -2719,7 +2721,7 @@ * Define your own with: * { , , hysteresis_start[1..8] } */ - #define CHOPPER_TIMING CHOPPER_DEFAULT_12V // All axes (override below) + #define CHOPPER_TIMING CHOPPER_DEFAULT_24V // All axes (override below) //#define CHOPPER_TIMING_X CHOPPER_TIMING // For X Axes (override below) //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X //#define CHOPPER_TIMING_Y CHOPPER_TIMING // For Y Axes (override below) @@ -2748,7 +2750,7 @@ * M912 - Clear stepper driver overtemperature pre-warn condition flag. * M122 - Report driver parameters (Requires TMC_DEBUG) */ - //#define MONITOR_DRIVER_STATUS + #define MONITOR_DRIVER_STATUS #if ENABLED(MONITOR_DRIVER_STATUS) #define CURRENT_STEP_DOWN 50 // [mA] @@ -2763,7 +2765,7 @@ * STEALTHCHOP_(XY|Z|E) must be enabled to use HYBRID_THRESHOLD. * M913 X/Y/Z/E to live tune the setting */ - //#define HYBRID_THRESHOLD + #define HYBRID_THRESHOLD #define X_HYBRID_THRESHOLD 100 // [mm/s] #define X2_HYBRID_THRESHOLD 100 @@ -2839,7 +2841,7 @@ * Beta feature! * Create a 50/50 square wave step pulse optimal for stepper drivers. */ - //#define SQUARE_WAVE_STEPPING + #define SQUARE_WAVE_STEPPING /** * Enable M122 debugging command for TMC stepper drivers. diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.0/Configuration.h b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.0/Configuration.h index 78c2dc9160..a39a9daf15 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.0/Configuration.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.0/Configuration.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Creality/Ender-3/BigTreeTech SKR Mini E3 1.0" + /** * Configuration.h * @@ -69,7 +71,7 @@ // @section info // Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes. +#define STRING_CONFIG_H_AUTHOR "(thisiskeithb, Ender-3)" // Who made the changes. //#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) /** @@ -102,14 +104,14 @@ * * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] */ -#define SERIAL_PORT 0 +#define SERIAL_PORT 2 /** * Select a secondary serial port on the board to use for communication with the host. * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] */ -//#define SERIAL_PORT_2 -1 +#define SERIAL_PORT_2 -1 /** * Select a third serial port on the board to use for communication with the host. @@ -127,18 +129,18 @@ * * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ -#define BAUDRATE 250000 +#define BAUDRATE 115200 // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH // Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_RAMPS_14_EFB + #define MOTHERBOARD BOARD_BTT_SKR_MINI_E3_V1_0 #endif // Name displayed in the LCD "Ready" message and Info menu -//#define CUSTOM_MACHINE_NAME "3D Printer" +#define CUSTOM_MACHINE_NAME "Ender-3" // Printer's unique ID, used by some programs to differentiate between machines. // Choose your own or use a service like https://www.uuidgenerator.net/version4 @@ -424,7 +426,7 @@ #define TEMP_SENSOR_5 0 #define TEMP_SENSOR_6 0 #define TEMP_SENSOR_7 0 -#define TEMP_SENSOR_BED 0 +#define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 #define TEMP_SENSOR_COOLER 0 @@ -480,7 +482,7 @@ #define HEATER_5_MAXTEMP 275 #define HEATER_6_MAXTEMP 275 #define HEATER_7_MAXTEMP 275 -#define BED_MAXTEMP 150 +#define BED_MAXTEMP 125 #define CHAMBER_MAXTEMP 60 /** @@ -510,16 +512,17 @@ //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) // Set/get with gcode: M301 E[extruder number, 0-2] + // Creality Ender-3 #if ENABLED(PID_PARAMS_PER_HOTEND) // Specify between 1 and HOTENDS values per array. // If fewer than EXTRUDER values are provided, the last element will be repeated. - #define DEFAULT_Kp_LIST { 22.20, 22.20 } - #define DEFAULT_Ki_LIST { 1.08, 1.08 } - #define DEFAULT_Kd_LIST { 114.00, 114.00 } + #define DEFAULT_Kp_LIST { 21.73, 21.73 } + #define DEFAULT_Ki_LIST { 1.54, 1.54 } + #define DEFAULT_Kd_LIST { 76.55, 76.55 } #else - #define DEFAULT_Kp 22.20 - #define DEFAULT_Ki 1.08 - #define DEFAULT_Kd 114.00 + #define DEFAULT_Kp 21.73 + #define DEFAULT_Ki 1.54 + #define DEFAULT_Kd 76.55 #endif #endif // PIDTEMP @@ -556,11 +559,9 @@ //#define MIN_BED_POWER 0 //#define PID_BED_DEBUG // Sends debug data to the serial port. - // 120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - // from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) - #define DEFAULT_bedKp 10.00 - #define DEFAULT_bedKi .023 - #define DEFAULT_bedKd 305.4 + #define DEFAULT_bedKp 50.71 + #define DEFAULT_bedKi 9.88 + #define DEFAULT_bedKd 173.43 // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. #endif // PIDTEMPBED @@ -634,7 +635,7 @@ * Note: For Bowden Extruders make this large enough to allow load/unload. */ #define PREVENT_LENGTHY_EXTRUDE -#define EXTRUDE_MAXLENGTH 200 +#define EXTRUDE_MAXLENGTH 600 //=========================================================================== //======================== Thermal Runaway Protection ======================= @@ -743,15 +744,15 @@ * TMC5130, TMC5130_STANDALONE, TMC5160, TMC5160_STANDALONE * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'L6474', 'POWERSTEP01', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2160', 'TMC2160_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC2209', 'TMC2209_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE', 'TMC5160', 'TMC5160_STANDALONE'] */ -#define X_DRIVER_TYPE A4988 -#define Y_DRIVER_TYPE A4988 -#define Z_DRIVER_TYPE A4988 +#define X_DRIVER_TYPE TMC2209 +#define Y_DRIVER_TYPE TMC2209 +#define Z_DRIVER_TYPE TMC2209 //#define X2_DRIVER_TYPE A4988 //#define Y2_DRIVER_TYPE A4988 //#define Z2_DRIVER_TYPE A4988 //#define Z3_DRIVER_TYPE A4988 //#define Z4_DRIVER_TYPE A4988 -#define E0_DRIVER_TYPE A4988 +#define E0_DRIVER_TYPE TMC2209 //#define E1_DRIVER_TYPE A4988 //#define E2_DRIVER_TYPE A4988 //#define E3_DRIVER_TYPE A4988 @@ -762,7 +763,7 @@ // Enable this feature if all enabled endstop pins are interrupt-capable. // This will remove the need to poll the interrupt pins, saving many CPU cycles. -//#define ENDSTOP_INTERRUPTS_FEATURE +#define ENDSTOP_INTERRUPTS_FEATURE /** * Endstop Noise Threshold @@ -806,14 +807,14 @@ * Override with M92 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 500 } +#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 93 } /** * Default Max Feed Rate (mm/s) * Override with M203 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 } +#define DEFAULT_MAX_FEEDRATE { 500, 500, 5, 25 } //#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 #if ENABLED(LIMITED_MAX_FR_EDITING) @@ -826,7 +827,7 @@ * Override with M201 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 } +#define DEFAULT_MAX_ACCELERATION { 500, 500, 100, 5000 } //#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 #if ENABLED(LIMITED_MAX_ACCEL_EDITING) @@ -841,9 +842,9 @@ * M204 R Retract Acceleration * M204 T Travel Acceleration */ -#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves +#define DEFAULT_ACCELERATION 500 // X, Y, Z and E acceleration for printing moves +#define DEFAULT_RETRACT_ACCELERATION 500 // E acceleration for retracts +#define DEFAULT_TRAVEL_ACCELERATION 500 // X, Y, Z acceleration for travel (non printing) moves /** * Default Jerk limits (mm/s) @@ -877,7 +878,7 @@ * https://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html */ #if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.013 // (mm) Distance from real junction edge + #define JUNCTION_DEVIATION_MM 0.08 // (mm) Distance from real junction edge #define JD_HANDLE_SMALL_SEGMENTS // Use curvature estimation instead of just the junction angle // for small segments (< 1mm) with large junction angles (> 135°). #endif @@ -890,7 +891,7 @@ * * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained */ -//#define S_CURVE_ACCELERATION +#define S_CURVE_ACCELERATION //=========================================================================== //============================= Z Probe Options ============================= @@ -906,7 +907,7 @@ * The probe replaces the Z-MIN endstop and is used for Z homing. * (Automatically enables USE_PROBE_FOR_Z_HOMING.) */ -#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN +//#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN // Force the use of the probe for Z-axis homing //#define USE_PROBE_FOR_Z_HOMING @@ -1185,19 +1186,19 @@ // @section extruder #define DISABLE_E false // Disable the extruder when not stepping -#define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled +//#define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled // @section machine // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR false +#define INVERT_X_DIR true #define INVERT_Y_DIR true #define INVERT_Z_DIR false // @section extruder // For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR false +#define INVERT_E0_DIR true #define INVERT_E1_DIR false #define INVERT_E2_DIR false #define INVERT_E3_DIR false @@ -1232,8 +1233,8 @@ // @section machine // The size of the printable area -#define X_BED_SIZE 200 -#define Y_BED_SIZE 200 +#define X_BED_SIZE 235 +#define Y_BED_SIZE 235 // Travel limits (mm) after homing, corresponding to endstop positions. #define X_MIN_POS 0 @@ -1241,7 +1242,7 @@ #define Z_MIN_POS 0 #define X_MAX_POS X_BED_SIZE #define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 200 +#define Z_MAX_POS 250 /** * Software Endstops @@ -1389,7 +1390,7 @@ //#define AUTO_BED_LEVELING_LINEAR //#define AUTO_BED_LEVELING_BILINEAR //#define AUTO_BED_LEVELING_UBL -//#define MESH_BED_LEVELING +#define MESH_BED_LEVELING /** * Normally G28 leaves leveling disabled on completion. Enable one of @@ -1454,7 +1455,7 @@ #if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR) // Set the number of grid points per dimension. - #define GRID_MAX_POINTS_X 3 + #define GRID_MAX_POINTS_X 5 #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X // Probe along the Y axis, advancing X after each column @@ -1464,7 +1465,7 @@ // Beyond the probed grid, continue the implied tilt? // Default is to maintain the height of the nearest edge. - //#define EXTRAPOLATE_BEYOND_GRID + #define EXTRAPOLATE_BEYOND_GRID // // Experimental Subdivision of the grid by Catmull-Rom method. @@ -1518,16 +1519,16 @@ * Add a bed leveling sub-menu for ABL or MBL. * Include a guided procedure if manual probing is enabled. */ -//#define LCD_BED_LEVELING +#define LCD_BED_LEVELING #if ENABLED(LCD_BED_LEVELING) #define MESH_EDIT_Z_STEP 0.025 // (mm) Step size while manually probing Z axis. #define LCD_PROBE_Z_RANGE 4 // (mm) Z Range centered on Z_MIN_POS for LCD Z adjustment - //#define MESH_EDIT_MENU // Add a menu to edit mesh points + #define MESH_EDIT_MENU // Add a menu to edit mesh points #endif // Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS +#define LEVEL_BED_CORNERS #if ENABLED(LEVEL_BED_CORNERS) #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets @@ -1595,7 +1596,7 @@ #endif // Homing speeds (mm/min) -#define HOMING_FEEDRATE_MM_M { (50*60), (50*60), (4*60) } +#define HOMING_FEEDRATE_MM_M { (20*60), (20*60), (4*60) } // Validate that endstops are triggered on homing moves #define VALIDATE_HOMING_ENDSTOPS @@ -1672,12 +1673,12 @@ * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) */ -//#define EEPROM_SETTINGS // Persistent storage with M500 and M501 +#define EEPROM_SETTINGS // Persistent storage with M500 and M501 //#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. #define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load #if ENABLED(EEPROM_SETTINGS) - //#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. + #define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. #endif // @@ -1706,16 +1707,16 @@ // Preheat Constants - Up to 5 are supported without changes // #define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 180 -#define PREHEAT_1_TEMP_BED 70 +#define PREHEAT_1_TEMP_HOTEND 185 +#define PREHEAT_1_TEMP_BED 45 #define PREHEAT_1_TEMP_CHAMBER 35 -#define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 +#define PREHEAT_1_FAN_SPEED 255 // Value from 0 to 255 #define PREHEAT_2_LABEL "ABS" #define PREHEAT_2_TEMP_HOTEND 240 #define PREHEAT_2_TEMP_BED 110 #define PREHEAT_2_TEMP_CHAMBER 35 -#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 +#define PREHEAT_2_FAN_SPEED 255 // Value from 0 to 255 /** * Nozzle Park @@ -1728,7 +1729,7 @@ * P1 Raise the nozzle always to Z-park height. * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. */ -//#define NOZZLE_PARK_FEATURE +#define NOZZLE_PARK_FEATURE #if ENABLED(NOZZLE_PARK_FEATURE) // Specify a park position as { X, Y, Z_raise } @@ -1921,7 +1922,7 @@ * * :['JAPANESE', 'WESTERN', 'CYRILLIC'] */ -#define DISPLAY_CHARSET_HD44780 JAPANESE +#define DISPLAY_CHARSET_HD44780 WESTERN /** * Info Screen Style (0:Classic, 1:Průša) @@ -1936,7 +1937,7 @@ * SD Card support is disabled by default. If your controller has an SD slot, * you must uncomment the following option or it won't work. */ -//#define SDSUPPORT +#define SDSUPPORT /** * SD CARD: ENABLE CRC @@ -2006,7 +2007,7 @@ // // Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. // -//#define INDIVIDUAL_AXIS_HOMING_MENU +#define INDIVIDUAL_AXIS_HOMING_MENU // // SPEAKER/BUZZER @@ -2287,7 +2288,7 @@ // This is RAMPS-compatible using a single 10-pin connector. // (For CR-10 owners who want to replace the Melzi Creality board but retain the display) // -//#define CR10_STOCKDISPLAY +#define CR10_STOCKDISPLAY // // Ender-2 OEM display, a variant of the MKS_MINI_12864 diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h index 5335fa012a..41593a2f23 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Creality/Ender-3/BigTreeTech SKR Mini E3 1.0" + /** * Configuration_adv.h * @@ -741,7 +743,7 @@ //#define HOMING_BACKOFF_POST_MM { 2, 2, 2 } // (mm) Backoff from endstops after homing -//#define QUICK_HOME // If G28 contains XY do a diagonal move first +#define QUICK_HOME // If G28 contains XY do a diagonal move first //#define HOME_Y_BEFORE_X // If G28 contains XY home Y before X //#define HOME_Z_FIRST // Home Z first. Requires a Z-MIN endstop (not a probe). //#define CODEPENDENT_XY_HOMING // If X/Y can't home without homing Y/X first @@ -867,7 +869,7 @@ // On a 300mm bed a 5% grade would give a misalignment of ~1.5cm #define G34_MAX_GRADE 5 // (%) Maximum incline that G34 will handle - #define Z_STEPPER_ALIGN_ITERATIONS 5 // Number of iterations to apply during alignment + #define Z_STEPPER_ALIGN_ITERATIONS 3 // Number of iterations to apply during alignment #define Z_STEPPER_ALIGN_ACC 0.02 // Stop iterating early if the accuracy is better than this #define RESTORE_LEVELING_AFTER_G34 // Restore leveling after G34 is done? // After G34, re-home Z (G28 Z) or just calculate it from the last probe heights? @@ -1175,7 +1177,7 @@ #endif // Include a page of printer information in the LCD Main Menu - //#define LCD_INFO_MENU + #define LCD_INFO_MENU #if ENABLED(LCD_INFO_MENU) //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages #endif @@ -1229,13 +1231,13 @@ #endif // Scroll a longer status message into view - //#define STATUS_MESSAGE_SCROLLING + #define STATUS_MESSAGE_SCROLLING // On the Info Screen, display XY with one decimal place when possible //#define LCD_DECIMAL_SMALL_XY // Add an 'M73' G-code to set the current percentage - //#define LCD_SET_PROGRESS_MANUALLY + #define LCD_SET_PROGRESS_MANUALLY // Show the E position (filament used) during printing //#define LCD_SHOW_E_TOTAL @@ -1361,16 +1363,16 @@ * - SDSORT_CACHE_NAMES will retain the sorted file listing in RAM. (Expensive!) * - SDSORT_DYNAMIC_RAM only uses RAM when the SD menu is visible. (Use with caution!) */ - //#define SDCARD_SORT_ALPHA + #define SDCARD_SORT_ALPHA // SD Card Sorting options #if ENABLED(SDCARD_SORT_ALPHA) #define SDSORT_LIMIT 40 // Maximum number of sorted items (10-256). Costs 27 bytes each. #define FOLDER_SORTING -1 // -1=above 0=none 1=below #define SDSORT_GCODE false // Allow turning sorting on/off with LCD and M34 G-code. - #define SDSORT_USES_RAM false // Pre-allocate a static array for faster pre-sorting. + #define SDSORT_USES_RAM true // Pre-allocate a static array for faster pre-sorting. #define SDSORT_USES_STACK false // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.) - #define SDSORT_CACHE_NAMES false // Keep sorted items in RAM longer for speedy performance. Most expensive option. + #define SDSORT_CACHE_NAMES true // Keep sorted items in RAM longer for speedy performance. Most expensive option. #define SDSORT_DYNAMIC_RAM false // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use! #define SDSORT_CACHE_VFATS 2 // Maximum number of 13-byte VFAT entries to use for sorting. // Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM. @@ -1381,10 +1383,10 @@ //#define UTF_FILENAME_SUPPORT // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT + #define LONG_FILENAME_HOST_SUPPORT // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES + #define SCROLL_LONG_FILENAMES // Leave the heaters on after Stop Print (not recommended!) //#define SD_ABORT_NO_COOLDOWN @@ -1476,7 +1478,7 @@ * * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] */ - //#define SDCARD_CONNECTION LCD + #define SDCARD_CONNECTION ONBOARD // Enable if SD detect is rendered useless (e.g., by using an SD extender) //#define NO_SD_DETECT @@ -1790,7 +1792,7 @@ * * Warning: Does not respect endstops! */ -//#define BABYSTEPPING +#define BABYSTEPPING #if ENABLED(BABYSTEPPING) //#define INTEGRATED_BABYSTEPPING // EXPERIMENTAL integration of babystepping into the Stepper ISR //#define BABYSTEP_WITHOUT_HOMING @@ -1801,7 +1803,7 @@ #define BABYSTEP_MULTIPLICATOR_Z 1 // (steps or mm) Steps or millimeter distance for each Z babystep #define BABYSTEP_MULTIPLICATOR_XY 1 // (steps or mm) Steps or millimeter distance for each XY babystep - //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. + #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. // Note: Extra time may be added to mitigate controller latency. @@ -1837,12 +1839,12 @@ * * See https://marlinfw.org/docs/features/lin_advance.html for full instructions. */ -//#define LIN_ADVANCE +#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) //#define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants - #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed + #define LIN_ADVANCE_K 0.0 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // If enabled, this will generate debug information output over USB. - //#define EXPERIMENTAL_SCURVE // Enable this option to permit S-Curve Acceleration + #define EXPERIMENTAL_SCURVE // Enable this option to permit S-Curve Acceleration #endif // @section leveling @@ -1982,7 +1984,7 @@ // // G2/G3 Arc Support // -#define ARC_SUPPORT // Disable this feature to save ~3226 bytes +//#define ARC_SUPPORT // Disable this feature to save ~3226 bytes #if ENABLED(ARC_SUPPORT) #define MM_PER_ARC_SEGMENT 1 // (mm) Length (or minimum length) of each arc segment //#define ARC_SEGMENTS_PER_R 1 // Max segment length, MM_PER = Min @@ -2141,7 +2143,7 @@ * Currently handles M108, M112, M410, M876 * NOTE: Not yet implemented for all platforms. */ -//#define EMERGENCY_PARSER +#define EMERGENCY_PARSER /** * Realtime Reporting (requires EMERGENCY_PARSER) @@ -2311,14 +2313,14 @@ * * Enable PARK_HEAD_ON_PAUSE to add the G-code M125 Pause and Park. */ -//#define ADVANCED_PAUSE_FEATURE +#define ADVANCED_PAUSE_FEATURE #if ENABLED(ADVANCED_PAUSE_FEATURE) #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. // This short retract is done immediately, before parking the nozzle. #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast. #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload. + #define FILAMENT_CHANGE_UNLOAD_LENGTH 400 // (mm) The length of filament for a complete unload. // For Bowden, the full length of the tube and nozzle. // For direct drive, the full length of the nozzle. // Set to 0 for manual unloading. @@ -2327,7 +2329,7 @@ // 0 to disable start loading and skip to fast load only #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast. #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle. + #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 350 // (mm) Load length of filament, from extruder gear to nozzle. // For Bowden, the full length of the tube and nozzle. // For direct drive, the full length of the nozzle. //#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted. @@ -2352,7 +2354,7 @@ //#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. //#define HOME_BEFORE_FILAMENT_CHANGE // If needed, home before parking for filament change - //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. + #define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) #endif @@ -2493,7 +2495,7 @@ #define INTERPOLATE true #if AXIS_IS_TMC(X) - #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. + #define X_CURRENT 580 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for sensorless homing #define X_MICROSTEPS 16 // 0..256 #define X_RSENSE 0.11 @@ -2511,7 +2513,7 @@ #endif #if AXIS_IS_TMC(Y) - #define Y_CURRENT 800 + #define Y_CURRENT 580 #define Y_CURRENT_HOME Y_CURRENT #define Y_MICROSTEPS 16 #define Y_RSENSE 0.11 @@ -2529,7 +2531,7 @@ #endif #if AXIS_IS_TMC(Z) - #define Z_CURRENT 800 + #define Z_CURRENT 580 #define Z_CURRENT_HOME Z_CURRENT #define Z_MICROSTEPS 16 #define Z_RSENSE 0.11 @@ -2565,7 +2567,7 @@ #endif #if AXIS_IS_TMC(E0) - #define E0_CURRENT 800 + #define E0_CURRENT 650 #define E0_MICROSTEPS 16 #define E0_RSENSE 0.11 #define E0_CHAIN_POS -1 @@ -2670,15 +2672,15 @@ * Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers * on the same serial port, either here or in your board's pins file. */ - //#define X_SLAVE_ADDRESS 0 - //#define Y_SLAVE_ADDRESS 0 - //#define Z_SLAVE_ADDRESS 0 + #define X_SLAVE_ADDRESS 0 + #define Y_SLAVE_ADDRESS 2 + #define Z_SLAVE_ADDRESS 1 //#define X2_SLAVE_ADDRESS 0 //#define Y2_SLAVE_ADDRESS 0 //#define Z2_SLAVE_ADDRESS 0 //#define Z3_SLAVE_ADDRESS 0 //#define Z4_SLAVE_ADDRESS 0 - //#define E0_SLAVE_ADDRESS 0 + #define E0_SLAVE_ADDRESS 3 //#define E1_SLAVE_ADDRESS 0 //#define E2_SLAVE_ADDRESS 0 //#define E3_SLAVE_ADDRESS 0 @@ -2719,7 +2721,7 @@ * Define your own with: * { , , hysteresis_start[1..8] } */ - #define CHOPPER_TIMING CHOPPER_DEFAULT_12V // All axes (override below) + #define CHOPPER_TIMING CHOPPER_DEFAULT_24V // All axes (override below) //#define CHOPPER_TIMING_X CHOPPER_TIMING // For X Axes (override below) //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X //#define CHOPPER_TIMING_Y CHOPPER_TIMING // For Y Axes (override below) @@ -2839,7 +2841,7 @@ * Beta feature! * Create a 50/50 square wave step pulse optimal for stepper drivers. */ - //#define SQUARE_WAVE_STEPPING + #define SQUARE_WAVE_STEPPING /** * Enable M122 debugging command for TMC stepper drivers. diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.2/Configuration.h b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.2/Configuration.h index 78c2dc9160..7f83011ab8 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.2/Configuration.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.2/Configuration.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Creality/Ender-3/BigTreeTech SKR Mini E3 1.2" + /** * Configuration.h * @@ -69,7 +71,7 @@ // @section info // Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes. +#define STRING_CONFIG_H_AUTHOR "(thisiskeithb, Ender-3)" // Who made the changes. //#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) /** @@ -102,14 +104,14 @@ * * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] */ -#define SERIAL_PORT 0 +#define SERIAL_PORT 2 /** * Select a secondary serial port on the board to use for communication with the host. * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] */ -//#define SERIAL_PORT_2 -1 +#define SERIAL_PORT_2 -1 /** * Select a third serial port on the board to use for communication with the host. @@ -127,18 +129,18 @@ * * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ -#define BAUDRATE 250000 +#define BAUDRATE 115200 // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH // Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_RAMPS_14_EFB + #define MOTHERBOARD BOARD_BTT_SKR_MINI_E3_V1_2 #endif // Name displayed in the LCD "Ready" message and Info menu -//#define CUSTOM_MACHINE_NAME "3D Printer" +#define CUSTOM_MACHINE_NAME "Ender-3" // Printer's unique ID, used by some programs to differentiate between machines. // Choose your own or use a service like https://www.uuidgenerator.net/version4 @@ -424,7 +426,7 @@ #define TEMP_SENSOR_5 0 #define TEMP_SENSOR_6 0 #define TEMP_SENSOR_7 0 -#define TEMP_SENSOR_BED 0 +#define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 #define TEMP_SENSOR_COOLER 0 @@ -480,7 +482,7 @@ #define HEATER_5_MAXTEMP 275 #define HEATER_6_MAXTEMP 275 #define HEATER_7_MAXTEMP 275 -#define BED_MAXTEMP 150 +#define BED_MAXTEMP 125 #define CHAMBER_MAXTEMP 60 /** @@ -510,16 +512,17 @@ //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) // Set/get with gcode: M301 E[extruder number, 0-2] + // Creality Ender-3 #if ENABLED(PID_PARAMS_PER_HOTEND) // Specify between 1 and HOTENDS values per array. // If fewer than EXTRUDER values are provided, the last element will be repeated. - #define DEFAULT_Kp_LIST { 22.20, 22.20 } - #define DEFAULT_Ki_LIST { 1.08, 1.08 } - #define DEFAULT_Kd_LIST { 114.00, 114.00 } + #define DEFAULT_Kp_LIST { 21.73, 21.73 } + #define DEFAULT_Ki_LIST { 1.54, 1.54 } + #define DEFAULT_Kd_LIST { 76.55, 76.55 } #else - #define DEFAULT_Kp 22.20 - #define DEFAULT_Ki 1.08 - #define DEFAULT_Kd 114.00 + #define DEFAULT_Kp 21.73 + #define DEFAULT_Ki 1.54 + #define DEFAULT_Kd 76.55 #endif #endif // PIDTEMP @@ -556,11 +559,9 @@ //#define MIN_BED_POWER 0 //#define PID_BED_DEBUG // Sends debug data to the serial port. - // 120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - // from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) - #define DEFAULT_bedKp 10.00 - #define DEFAULT_bedKi .023 - #define DEFAULT_bedKd 305.4 + #define DEFAULT_bedKp 50.71 + #define DEFAULT_bedKi 9.88 + #define DEFAULT_bedKd 173.43 // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. #endif // PIDTEMPBED @@ -634,7 +635,7 @@ * Note: For Bowden Extruders make this large enough to allow load/unload. */ #define PREVENT_LENGTHY_EXTRUDE -#define EXTRUDE_MAXLENGTH 200 +#define EXTRUDE_MAXLENGTH 600 //=========================================================================== //======================== Thermal Runaway Protection ======================= @@ -743,15 +744,15 @@ * TMC5130, TMC5130_STANDALONE, TMC5160, TMC5160_STANDALONE * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'L6474', 'POWERSTEP01', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2160', 'TMC2160_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC2209', 'TMC2209_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE', 'TMC5160', 'TMC5160_STANDALONE'] */ -#define X_DRIVER_TYPE A4988 -#define Y_DRIVER_TYPE A4988 -#define Z_DRIVER_TYPE A4988 +#define X_DRIVER_TYPE TMC2209 +#define Y_DRIVER_TYPE TMC2209 +#define Z_DRIVER_TYPE TMC2209 //#define X2_DRIVER_TYPE A4988 //#define Y2_DRIVER_TYPE A4988 //#define Z2_DRIVER_TYPE A4988 //#define Z3_DRIVER_TYPE A4988 //#define Z4_DRIVER_TYPE A4988 -#define E0_DRIVER_TYPE A4988 +#define E0_DRIVER_TYPE TMC2209 //#define E1_DRIVER_TYPE A4988 //#define E2_DRIVER_TYPE A4988 //#define E3_DRIVER_TYPE A4988 @@ -806,14 +807,14 @@ * Override with M92 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 500 } +#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 93 } /** * Default Max Feed Rate (mm/s) * Override with M203 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 } +#define DEFAULT_MAX_FEEDRATE { 500, 500, 5, 25 } //#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 #if ENABLED(LIMITED_MAX_FR_EDITING) @@ -826,7 +827,7 @@ * Override with M201 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 } +#define DEFAULT_MAX_ACCELERATION { 500, 500, 100, 5000 } //#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 #if ENABLED(LIMITED_MAX_ACCEL_EDITING) @@ -841,9 +842,9 @@ * M204 R Retract Acceleration * M204 T Travel Acceleration */ -#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves +#define DEFAULT_ACCELERATION 500 // X, Y, Z and E acceleration for printing moves +#define DEFAULT_RETRACT_ACCELERATION 500 // E acceleration for retracts +#define DEFAULT_TRAVEL_ACCELERATION 500 // X, Y, Z acceleration for travel (non printing) moves /** * Default Jerk limits (mm/s) @@ -877,7 +878,7 @@ * https://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html */ #if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.013 // (mm) Distance from real junction edge + #define JUNCTION_DEVIATION_MM 0.08 // (mm) Distance from real junction edge #define JD_HANDLE_SMALL_SEGMENTS // Use curvature estimation instead of just the junction angle // for small segments (< 1mm) with large junction angles (> 135°). #endif @@ -890,7 +891,7 @@ * * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained */ -//#define S_CURVE_ACCELERATION +#define S_CURVE_ACCELERATION //=========================================================================== //============================= Z Probe Options ============================= @@ -1185,19 +1186,19 @@ // @section extruder #define DISABLE_E false // Disable the extruder when not stepping -#define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled +//#define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled // @section machine // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR false +#define INVERT_X_DIR true #define INVERT_Y_DIR true #define INVERT_Z_DIR false // @section extruder // For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR false +#define INVERT_E0_DIR true #define INVERT_E1_DIR false #define INVERT_E2_DIR false #define INVERT_E3_DIR false @@ -1232,8 +1233,8 @@ // @section machine // The size of the printable area -#define X_BED_SIZE 200 -#define Y_BED_SIZE 200 +#define X_BED_SIZE 235 +#define Y_BED_SIZE 235 // Travel limits (mm) after homing, corresponding to endstop positions. #define X_MIN_POS 0 @@ -1241,7 +1242,7 @@ #define Z_MIN_POS 0 #define X_MAX_POS X_BED_SIZE #define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 200 +#define Z_MAX_POS 250 /** * Software Endstops @@ -1389,7 +1390,7 @@ //#define AUTO_BED_LEVELING_LINEAR //#define AUTO_BED_LEVELING_BILINEAR //#define AUTO_BED_LEVELING_UBL -//#define MESH_BED_LEVELING +#define MESH_BED_LEVELING /** * Normally G28 leaves leveling disabled on completion. Enable one of @@ -1454,7 +1455,7 @@ #if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR) // Set the number of grid points per dimension. - #define GRID_MAX_POINTS_X 3 + #define GRID_MAX_POINTS_X 5 #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X // Probe along the Y axis, advancing X after each column @@ -1464,7 +1465,7 @@ // Beyond the probed grid, continue the implied tilt? // Default is to maintain the height of the nearest edge. - //#define EXTRAPOLATE_BEYOND_GRID + #define EXTRAPOLATE_BEYOND_GRID // // Experimental Subdivision of the grid by Catmull-Rom method. @@ -1518,16 +1519,16 @@ * Add a bed leveling sub-menu for ABL or MBL. * Include a guided procedure if manual probing is enabled. */ -//#define LCD_BED_LEVELING +#define LCD_BED_LEVELING #if ENABLED(LCD_BED_LEVELING) #define MESH_EDIT_Z_STEP 0.025 // (mm) Step size while manually probing Z axis. #define LCD_PROBE_Z_RANGE 4 // (mm) Z Range centered on Z_MIN_POS for LCD Z adjustment - //#define MESH_EDIT_MENU // Add a menu to edit mesh points + #define MESH_EDIT_MENU // Add a menu to edit mesh points #endif // Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS +#define LEVEL_BED_CORNERS #if ENABLED(LEVEL_BED_CORNERS) #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets @@ -1595,7 +1596,7 @@ #endif // Homing speeds (mm/min) -#define HOMING_FEEDRATE_MM_M { (50*60), (50*60), (4*60) } +#define HOMING_FEEDRATE_MM_M { (20*60), (20*60), (4*60) } // Validate that endstops are triggered on homing moves #define VALIDATE_HOMING_ENDSTOPS @@ -1672,12 +1673,12 @@ * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) */ -//#define EEPROM_SETTINGS // Persistent storage with M500 and M501 +#define EEPROM_SETTINGS // Persistent storage with M500 and M501 //#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. #define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load #if ENABLED(EEPROM_SETTINGS) - //#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. + #define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. #endif // @@ -1706,16 +1707,16 @@ // Preheat Constants - Up to 5 are supported without changes // #define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 180 -#define PREHEAT_1_TEMP_BED 70 +#define PREHEAT_1_TEMP_HOTEND 185 +#define PREHEAT_1_TEMP_BED 45 #define PREHEAT_1_TEMP_CHAMBER 35 -#define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 +#define PREHEAT_1_FAN_SPEED 255 // Value from 0 to 255 #define PREHEAT_2_LABEL "ABS" #define PREHEAT_2_TEMP_HOTEND 240 #define PREHEAT_2_TEMP_BED 110 #define PREHEAT_2_TEMP_CHAMBER 35 -#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 +#define PREHEAT_2_FAN_SPEED 255 // Value from 0 to 255 /** * Nozzle Park @@ -1728,7 +1729,7 @@ * P1 Raise the nozzle always to Z-park height. * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. */ -//#define NOZZLE_PARK_FEATURE +#define NOZZLE_PARK_FEATURE #if ENABLED(NOZZLE_PARK_FEATURE) // Specify a park position as { X, Y, Z_raise } @@ -1921,7 +1922,7 @@ * * :['JAPANESE', 'WESTERN', 'CYRILLIC'] */ -#define DISPLAY_CHARSET_HD44780 JAPANESE +#define DISPLAY_CHARSET_HD44780 WESTERN /** * Info Screen Style (0:Classic, 1:Průša) @@ -1936,7 +1937,7 @@ * SD Card support is disabled by default. If your controller has an SD slot, * you must uncomment the following option or it won't work. */ -//#define SDSUPPORT +#define SDSUPPORT /** * SD CARD: ENABLE CRC @@ -2006,7 +2007,7 @@ // // Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. // -//#define INDIVIDUAL_AXIS_HOMING_MENU +#define INDIVIDUAL_AXIS_HOMING_MENU // // SPEAKER/BUZZER @@ -2287,7 +2288,7 @@ // This is RAMPS-compatible using a single 10-pin connector. // (For CR-10 owners who want to replace the Melzi Creality board but retain the display) // -//#define CR10_STOCKDISPLAY +#define CR10_STOCKDISPLAY // // Ender-2 OEM display, a variant of the MKS_MINI_12864 diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h index 5335fa012a..528b22750d 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Creality/Ender-3/BigTreeTech SKR Mini E3 1.2" + /** * Configuration_adv.h * @@ -741,7 +743,7 @@ //#define HOMING_BACKOFF_POST_MM { 2, 2, 2 } // (mm) Backoff from endstops after homing -//#define QUICK_HOME // If G28 contains XY do a diagonal move first +#define QUICK_HOME // If G28 contains XY do a diagonal move first //#define HOME_Y_BEFORE_X // If G28 contains XY home Y before X //#define HOME_Z_FIRST // Home Z first. Requires a Z-MIN endstop (not a probe). //#define CODEPENDENT_XY_HOMING // If X/Y can't home without homing Y/X first @@ -867,7 +869,7 @@ // On a 300mm bed a 5% grade would give a misalignment of ~1.5cm #define G34_MAX_GRADE 5 // (%) Maximum incline that G34 will handle - #define Z_STEPPER_ALIGN_ITERATIONS 5 // Number of iterations to apply during alignment + #define Z_STEPPER_ALIGN_ITERATIONS 3 // Number of iterations to apply during alignment #define Z_STEPPER_ALIGN_ACC 0.02 // Stop iterating early if the accuracy is better than this #define RESTORE_LEVELING_AFTER_G34 // Restore leveling after G34 is done? // After G34, re-home Z (G28 Z) or just calculate it from the last probe heights? @@ -1175,7 +1177,7 @@ #endif // Include a page of printer information in the LCD Main Menu - //#define LCD_INFO_MENU + #define LCD_INFO_MENU #if ENABLED(LCD_INFO_MENU) //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages #endif @@ -1229,13 +1231,13 @@ #endif // Scroll a longer status message into view - //#define STATUS_MESSAGE_SCROLLING + #define STATUS_MESSAGE_SCROLLING // On the Info Screen, display XY with one decimal place when possible //#define LCD_DECIMAL_SMALL_XY // Add an 'M73' G-code to set the current percentage - //#define LCD_SET_PROGRESS_MANUALLY + #define LCD_SET_PROGRESS_MANUALLY // Show the E position (filament used) during printing //#define LCD_SHOW_E_TOTAL @@ -1361,16 +1363,16 @@ * - SDSORT_CACHE_NAMES will retain the sorted file listing in RAM. (Expensive!) * - SDSORT_DYNAMIC_RAM only uses RAM when the SD menu is visible. (Use with caution!) */ - //#define SDCARD_SORT_ALPHA + #define SDCARD_SORT_ALPHA // SD Card Sorting options #if ENABLED(SDCARD_SORT_ALPHA) #define SDSORT_LIMIT 40 // Maximum number of sorted items (10-256). Costs 27 bytes each. #define FOLDER_SORTING -1 // -1=above 0=none 1=below #define SDSORT_GCODE false // Allow turning sorting on/off with LCD and M34 G-code. - #define SDSORT_USES_RAM false // Pre-allocate a static array for faster pre-sorting. + #define SDSORT_USES_RAM true // Pre-allocate a static array for faster pre-sorting. #define SDSORT_USES_STACK false // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.) - #define SDSORT_CACHE_NAMES false // Keep sorted items in RAM longer for speedy performance. Most expensive option. + #define SDSORT_CACHE_NAMES true // Keep sorted items in RAM longer for speedy performance. Most expensive option. #define SDSORT_DYNAMIC_RAM false // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use! #define SDSORT_CACHE_VFATS 2 // Maximum number of 13-byte VFAT entries to use for sorting. // Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM. @@ -1381,10 +1383,10 @@ //#define UTF_FILENAME_SUPPORT // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT + #define LONG_FILENAME_HOST_SUPPORT // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES + #define SCROLL_LONG_FILENAMES // Leave the heaters on after Stop Print (not recommended!) //#define SD_ABORT_NO_COOLDOWN @@ -1476,7 +1478,7 @@ * * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] */ - //#define SDCARD_CONNECTION LCD + #define SDCARD_CONNECTION ONBOARD // Enable if SD detect is rendered useless (e.g., by using an SD extender) //#define NO_SD_DETECT @@ -1790,7 +1792,7 @@ * * Warning: Does not respect endstops! */ -//#define BABYSTEPPING +#define BABYSTEPPING #if ENABLED(BABYSTEPPING) //#define INTEGRATED_BABYSTEPPING // EXPERIMENTAL integration of babystepping into the Stepper ISR //#define BABYSTEP_WITHOUT_HOMING @@ -1801,7 +1803,7 @@ #define BABYSTEP_MULTIPLICATOR_Z 1 // (steps or mm) Steps or millimeter distance for each Z babystep #define BABYSTEP_MULTIPLICATOR_XY 1 // (steps or mm) Steps or millimeter distance for each XY babystep - //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. + #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. // Note: Extra time may be added to mitigate controller latency. @@ -1837,12 +1839,12 @@ * * See https://marlinfw.org/docs/features/lin_advance.html for full instructions. */ -//#define LIN_ADVANCE +#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) //#define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants - #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed + #define LIN_ADVANCE_K 0.0 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // If enabled, this will generate debug information output over USB. - //#define EXPERIMENTAL_SCURVE // Enable this option to permit S-Curve Acceleration + #define EXPERIMENTAL_SCURVE // Enable this option to permit S-Curve Acceleration #endif // @section leveling @@ -1982,7 +1984,7 @@ // // G2/G3 Arc Support // -#define ARC_SUPPORT // Disable this feature to save ~3226 bytes +//#define ARC_SUPPORT // Disable this feature to save ~3226 bytes #if ENABLED(ARC_SUPPORT) #define MM_PER_ARC_SEGMENT 1 // (mm) Length (or minimum length) of each arc segment //#define ARC_SEGMENTS_PER_R 1 // Max segment length, MM_PER = Min @@ -2141,7 +2143,7 @@ * Currently handles M108, M112, M410, M876 * NOTE: Not yet implemented for all platforms. */ -//#define EMERGENCY_PARSER +#define EMERGENCY_PARSER /** * Realtime Reporting (requires EMERGENCY_PARSER) @@ -2311,14 +2313,14 @@ * * Enable PARK_HEAD_ON_PAUSE to add the G-code M125 Pause and Park. */ -//#define ADVANCED_PAUSE_FEATURE +#define ADVANCED_PAUSE_FEATURE #if ENABLED(ADVANCED_PAUSE_FEATURE) #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. // This short retract is done immediately, before parking the nozzle. #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast. #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload. + #define FILAMENT_CHANGE_UNLOAD_LENGTH 400 // (mm) The length of filament for a complete unload. // For Bowden, the full length of the tube and nozzle. // For direct drive, the full length of the nozzle. // Set to 0 for manual unloading. @@ -2327,7 +2329,7 @@ // 0 to disable start loading and skip to fast load only #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast. #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle. + #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 350 // (mm) Load length of filament, from extruder gear to nozzle. // For Bowden, the full length of the tube and nozzle. // For direct drive, the full length of the nozzle. //#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted. @@ -2352,7 +2354,7 @@ //#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. //#define HOME_BEFORE_FILAMENT_CHANGE // If needed, home before parking for filament change - //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. + #define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) #endif @@ -2493,7 +2495,7 @@ #define INTERPOLATE true #if AXIS_IS_TMC(X) - #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. + #define X_CURRENT 580 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for sensorless homing #define X_MICROSTEPS 16 // 0..256 #define X_RSENSE 0.11 @@ -2511,7 +2513,7 @@ #endif #if AXIS_IS_TMC(Y) - #define Y_CURRENT 800 + #define Y_CURRENT 580 #define Y_CURRENT_HOME Y_CURRENT #define Y_MICROSTEPS 16 #define Y_RSENSE 0.11 @@ -2529,7 +2531,7 @@ #endif #if AXIS_IS_TMC(Z) - #define Z_CURRENT 800 + #define Z_CURRENT 580 #define Z_CURRENT_HOME Z_CURRENT #define Z_MICROSTEPS 16 #define Z_RSENSE 0.11 @@ -2565,7 +2567,7 @@ #endif #if AXIS_IS_TMC(E0) - #define E0_CURRENT 800 + #define E0_CURRENT 650 #define E0_MICROSTEPS 16 #define E0_RSENSE 0.11 #define E0_CHAIN_POS -1 @@ -2719,7 +2721,7 @@ * Define your own with: * { , , hysteresis_start[1..8] } */ - #define CHOPPER_TIMING CHOPPER_DEFAULT_12V // All axes (override below) + #define CHOPPER_TIMING CHOPPER_DEFAULT_24V // All axes (override below) //#define CHOPPER_TIMING_X CHOPPER_TIMING // For X Axes (override below) //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X //#define CHOPPER_TIMING_Y CHOPPER_TIMING // For Y Axes (override below) @@ -2839,7 +2841,7 @@ * Beta feature! * Create a 50/50 square wave step pulse optimal for stepper drivers. */ - //#define SQUARE_WAVE_STEPPING + #define SQUARE_WAVE_STEPPING /** * Enable M122 debugging command for TMC stepper drivers. diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 2.0/Configuration.h b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 2.0/Configuration.h index 78c2dc9160..636de66bab 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 2.0/Configuration.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 2.0/Configuration.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Creality/Ender-3/BigTreeTech SKR Mini E3 2.0" + /** * Configuration.h * @@ -69,7 +71,7 @@ // @section info // Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes. +#define STRING_CONFIG_H_AUTHOR "(thisiskeithb, Ender-3)" // Who made the changes. //#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) /** @@ -102,14 +104,14 @@ * * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] */ -#define SERIAL_PORT 0 +#define SERIAL_PORT 2 /** * Select a secondary serial port on the board to use for communication with the host. * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] */ -//#define SERIAL_PORT_2 -1 +#define SERIAL_PORT_2 -1 /** * Select a third serial port on the board to use for communication with the host. @@ -127,18 +129,18 @@ * * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ -#define BAUDRATE 250000 +#define BAUDRATE 115200 // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH // Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_RAMPS_14_EFB + #define MOTHERBOARD BOARD_BTT_SKR_MINI_E3_V2_0 #endif // Name displayed in the LCD "Ready" message and Info menu -//#define CUSTOM_MACHINE_NAME "3D Printer" +#define CUSTOM_MACHINE_NAME "Ender-3" // Printer's unique ID, used by some programs to differentiate between machines. // Choose your own or use a service like https://www.uuidgenerator.net/version4 @@ -424,7 +426,7 @@ #define TEMP_SENSOR_5 0 #define TEMP_SENSOR_6 0 #define TEMP_SENSOR_7 0 -#define TEMP_SENSOR_BED 0 +#define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 #define TEMP_SENSOR_COOLER 0 @@ -480,7 +482,7 @@ #define HEATER_5_MAXTEMP 275 #define HEATER_6_MAXTEMP 275 #define HEATER_7_MAXTEMP 275 -#define BED_MAXTEMP 150 +#define BED_MAXTEMP 125 #define CHAMBER_MAXTEMP 60 /** @@ -510,16 +512,17 @@ //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) // Set/get with gcode: M301 E[extruder number, 0-2] + // Creality Ender-3 #if ENABLED(PID_PARAMS_PER_HOTEND) // Specify between 1 and HOTENDS values per array. // If fewer than EXTRUDER values are provided, the last element will be repeated. - #define DEFAULT_Kp_LIST { 22.20, 22.20 } - #define DEFAULT_Ki_LIST { 1.08, 1.08 } - #define DEFAULT_Kd_LIST { 114.00, 114.00 } + #define DEFAULT_Kp_LIST { 21.73, 21.73 } + #define DEFAULT_Ki_LIST { 1.54, 1.54 } + #define DEFAULT_Kd_LIST { 76.55, 76.55 } #else - #define DEFAULT_Kp 22.20 - #define DEFAULT_Ki 1.08 - #define DEFAULT_Kd 114.00 + #define DEFAULT_Kp 21.73 + #define DEFAULT_Ki 1.54 + #define DEFAULT_Kd 76.55 #endif #endif // PIDTEMP @@ -556,11 +559,9 @@ //#define MIN_BED_POWER 0 //#define PID_BED_DEBUG // Sends debug data to the serial port. - // 120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - // from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) - #define DEFAULT_bedKp 10.00 - #define DEFAULT_bedKi .023 - #define DEFAULT_bedKd 305.4 + #define DEFAULT_bedKp 50.71 + #define DEFAULT_bedKi 9.88 + #define DEFAULT_bedKd 173.43 // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. #endif // PIDTEMPBED @@ -634,7 +635,7 @@ * Note: For Bowden Extruders make this large enough to allow load/unload. */ #define PREVENT_LENGTHY_EXTRUDE -#define EXTRUDE_MAXLENGTH 200 +#define EXTRUDE_MAXLENGTH 600 //=========================================================================== //======================== Thermal Runaway Protection ======================= @@ -743,15 +744,15 @@ * TMC5130, TMC5130_STANDALONE, TMC5160, TMC5160_STANDALONE * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'L6474', 'POWERSTEP01', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2160', 'TMC2160_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC2209', 'TMC2209_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE', 'TMC5160', 'TMC5160_STANDALONE'] */ -#define X_DRIVER_TYPE A4988 -#define Y_DRIVER_TYPE A4988 -#define Z_DRIVER_TYPE A4988 +#define X_DRIVER_TYPE TMC2209 +#define Y_DRIVER_TYPE TMC2209 +#define Z_DRIVER_TYPE TMC2209 //#define X2_DRIVER_TYPE A4988 //#define Y2_DRIVER_TYPE A4988 //#define Z2_DRIVER_TYPE A4988 //#define Z3_DRIVER_TYPE A4988 //#define Z4_DRIVER_TYPE A4988 -#define E0_DRIVER_TYPE A4988 +#define E0_DRIVER_TYPE TMC2209 //#define E1_DRIVER_TYPE A4988 //#define E2_DRIVER_TYPE A4988 //#define E3_DRIVER_TYPE A4988 @@ -806,14 +807,14 @@ * Override with M92 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 500 } +#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 93 } /** * Default Max Feed Rate (mm/s) * Override with M203 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 } +#define DEFAULT_MAX_FEEDRATE { 500, 500, 5, 25 } //#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 #if ENABLED(LIMITED_MAX_FR_EDITING) @@ -826,7 +827,7 @@ * Override with M201 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 } +#define DEFAULT_MAX_ACCELERATION { 500, 500, 100, 5000 } //#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 #if ENABLED(LIMITED_MAX_ACCEL_EDITING) @@ -841,9 +842,9 @@ * M204 R Retract Acceleration * M204 T Travel Acceleration */ -#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves +#define DEFAULT_ACCELERATION 500 // X, Y, Z and E acceleration for printing moves +#define DEFAULT_RETRACT_ACCELERATION 500 // E acceleration for retracts +#define DEFAULT_TRAVEL_ACCELERATION 500 // X, Y, Z acceleration for travel (non printing) moves /** * Default Jerk limits (mm/s) @@ -877,7 +878,7 @@ * https://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html */ #if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.013 // (mm) Distance from real junction edge + #define JUNCTION_DEVIATION_MM 0.08 // (mm) Distance from real junction edge #define JD_HANDLE_SMALL_SEGMENTS // Use curvature estimation instead of just the junction angle // for small segments (< 1mm) with large junction angles (> 135°). #endif @@ -890,7 +891,7 @@ * * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained */ -//#define S_CURVE_ACCELERATION +#define S_CURVE_ACCELERATION //=========================================================================== //============================= Z Probe Options ============================= @@ -1190,14 +1191,14 @@ // @section machine // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR false +#define INVERT_X_DIR true #define INVERT_Y_DIR true #define INVERT_Z_DIR false // @section extruder // For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR false +#define INVERT_E0_DIR true #define INVERT_E1_DIR false #define INVERT_E2_DIR false #define INVERT_E3_DIR false @@ -1232,8 +1233,8 @@ // @section machine // The size of the printable area -#define X_BED_SIZE 200 -#define Y_BED_SIZE 200 +#define X_BED_SIZE 235 +#define Y_BED_SIZE 235 // Travel limits (mm) after homing, corresponding to endstop positions. #define X_MIN_POS 0 @@ -1241,7 +1242,7 @@ #define Z_MIN_POS 0 #define X_MAX_POS X_BED_SIZE #define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 200 +#define Z_MAX_POS 250 /** * Software Endstops @@ -1389,7 +1390,7 @@ //#define AUTO_BED_LEVELING_LINEAR //#define AUTO_BED_LEVELING_BILINEAR //#define AUTO_BED_LEVELING_UBL -//#define MESH_BED_LEVELING +#define MESH_BED_LEVELING /** * Normally G28 leaves leveling disabled on completion. Enable one of @@ -1454,7 +1455,7 @@ #if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR) // Set the number of grid points per dimension. - #define GRID_MAX_POINTS_X 3 + #define GRID_MAX_POINTS_X 5 #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X // Probe along the Y axis, advancing X after each column @@ -1464,7 +1465,7 @@ // Beyond the probed grid, continue the implied tilt? // Default is to maintain the height of the nearest edge. - //#define EXTRAPOLATE_BEYOND_GRID + #define EXTRAPOLATE_BEYOND_GRID // // Experimental Subdivision of the grid by Catmull-Rom method. @@ -1518,16 +1519,16 @@ * Add a bed leveling sub-menu for ABL or MBL. * Include a guided procedure if manual probing is enabled. */ -//#define LCD_BED_LEVELING +#define LCD_BED_LEVELING #if ENABLED(LCD_BED_LEVELING) #define MESH_EDIT_Z_STEP 0.025 // (mm) Step size while manually probing Z axis. #define LCD_PROBE_Z_RANGE 4 // (mm) Z Range centered on Z_MIN_POS for LCD Z adjustment - //#define MESH_EDIT_MENU // Add a menu to edit mesh points + #define MESH_EDIT_MENU // Add a menu to edit mesh points #endif // Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS +#define LEVEL_BED_CORNERS #if ENABLED(LEVEL_BED_CORNERS) #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets @@ -1595,7 +1596,7 @@ #endif // Homing speeds (mm/min) -#define HOMING_FEEDRATE_MM_M { (50*60), (50*60), (4*60) } +#define HOMING_FEEDRATE_MM_M { (20*60), (20*60), (4*60) } // Validate that endstops are triggered on homing moves #define VALIDATE_HOMING_ENDSTOPS @@ -1672,12 +1673,12 @@ * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) */ -//#define EEPROM_SETTINGS // Persistent storage with M500 and M501 +#define EEPROM_SETTINGS // Persistent storage with M500 and M501 //#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. #define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load #if ENABLED(EEPROM_SETTINGS) - //#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. + #define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. #endif // @@ -1706,16 +1707,16 @@ // Preheat Constants - Up to 5 are supported without changes // #define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 180 -#define PREHEAT_1_TEMP_BED 70 +#define PREHEAT_1_TEMP_HOTEND 185 +#define PREHEAT_1_TEMP_BED 45 #define PREHEAT_1_TEMP_CHAMBER 35 -#define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 +#define PREHEAT_1_FAN_SPEED 255 // Value from 0 to 255 #define PREHEAT_2_LABEL "ABS" #define PREHEAT_2_TEMP_HOTEND 240 #define PREHEAT_2_TEMP_BED 110 #define PREHEAT_2_TEMP_CHAMBER 35 -#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 +#define PREHEAT_2_FAN_SPEED 255 // Value from 0 to 255 /** * Nozzle Park @@ -1728,7 +1729,7 @@ * P1 Raise the nozzle always to Z-park height. * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. */ -//#define NOZZLE_PARK_FEATURE +#define NOZZLE_PARK_FEATURE #if ENABLED(NOZZLE_PARK_FEATURE) // Specify a park position as { X, Y, Z_raise } @@ -1936,7 +1937,7 @@ * SD Card support is disabled by default. If your controller has an SD slot, * you must uncomment the following option or it won't work. */ -//#define SDSUPPORT +#define SDSUPPORT /** * SD CARD: ENABLE CRC @@ -2006,7 +2007,7 @@ // // Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. // -//#define INDIVIDUAL_AXIS_HOMING_MENU +#define INDIVIDUAL_AXIS_HOMING_MENU // // SPEAKER/BUZZER @@ -2287,7 +2288,7 @@ // This is RAMPS-compatible using a single 10-pin connector. // (For CR-10 owners who want to replace the Melzi Creality board but retain the display) // -//#define CR10_STOCKDISPLAY +#define CR10_STOCKDISPLAY // // Ender-2 OEM display, a variant of the MKS_MINI_12864 diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h index 5335fa012a..5ee785c7f3 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Creality/Ender-3/BigTreeTech SKR Mini E3 2.0" + /** * Configuration_adv.h * @@ -461,7 +463,7 @@ * The fan turns on automatically whenever any driver is enabled and turns * off (or reduces to idle speed) shortly after drivers are turned off. */ -//#define USE_CONTROLLER_FAN +#define USE_CONTROLLER_FAN #if ENABLED(USE_CONTROLLER_FAN) //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan //#define CONTROLLER_FAN_USE_Z_ONLY // With this option only the Z axis is considered @@ -470,7 +472,7 @@ #define CONTROLLERFAN_SPEED_ACTIVE 255 // (0-255) Active speed, used when any motor is enabled #define CONTROLLERFAN_SPEED_IDLE 0 // (0-255) Idle speed, used when motors are disabled #define CONTROLLERFAN_IDLE_TIME 60 // (seconds) Extra time to keep the fan running after disabling motors - //#define CONTROLLER_FAN_EDITABLE // Enable M710 configurable settings + #define CONTROLLER_FAN_EDITABLE // Enable M710 configurable settings #if ENABLED(CONTROLLER_FAN_EDITABLE) #define CONTROLLER_FAN_MENU // Enable the Controller Fan submenu #endif @@ -736,12 +738,12 @@ //#define SENSORLESS_BACKOFF_MM { 2, 2 } // (mm) Backoff from endstops before sensorless homing -#define HOMING_BUMP_MM { 5, 5, 2 } // (mm) Backoff from endstops after first bump +#define HOMING_BUMP_MM { 0, 0, 2 } // (mm) Backoff from endstops after first bump #define HOMING_BUMP_DIVISOR { 2, 2, 4 } // Re-Bump Speed Divisor (Divides the Homing Feedrate) //#define HOMING_BACKOFF_POST_MM { 2, 2, 2 } // (mm) Backoff from endstops after homing -//#define QUICK_HOME // If G28 contains XY do a diagonal move first +#define QUICK_HOME // If G28 contains XY do a diagonal move first //#define HOME_Y_BEFORE_X // If G28 contains XY home Y before X //#define HOME_Z_FIRST // Home Z first. Requires a Z-MIN endstop (not a probe). //#define CODEPENDENT_XY_HOMING // If X/Y can't home without homing Y/X first @@ -1175,7 +1177,7 @@ #endif // Include a page of printer information in the LCD Main Menu - //#define LCD_INFO_MENU + #define LCD_INFO_MENU #if ENABLED(LCD_INFO_MENU) //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages #endif @@ -1229,13 +1231,13 @@ #endif // Scroll a longer status message into view - //#define STATUS_MESSAGE_SCROLLING + #define STATUS_MESSAGE_SCROLLING // On the Info Screen, display XY with one decimal place when possible //#define LCD_DECIMAL_SMALL_XY // Add an 'M73' G-code to set the current percentage - //#define LCD_SET_PROGRESS_MANUALLY + #define LCD_SET_PROGRESS_MANUALLY // Show the E position (filament used) during printing //#define LCD_SHOW_E_TOTAL @@ -1361,16 +1363,16 @@ * - SDSORT_CACHE_NAMES will retain the sorted file listing in RAM. (Expensive!) * - SDSORT_DYNAMIC_RAM only uses RAM when the SD menu is visible. (Use with caution!) */ - //#define SDCARD_SORT_ALPHA + #define SDCARD_SORT_ALPHA // SD Card Sorting options #if ENABLED(SDCARD_SORT_ALPHA) #define SDSORT_LIMIT 40 // Maximum number of sorted items (10-256). Costs 27 bytes each. #define FOLDER_SORTING -1 // -1=above 0=none 1=below #define SDSORT_GCODE false // Allow turning sorting on/off with LCD and M34 G-code. - #define SDSORT_USES_RAM false // Pre-allocate a static array for faster pre-sorting. + #define SDSORT_USES_RAM true // Pre-allocate a static array for faster pre-sorting. #define SDSORT_USES_STACK false // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.) - #define SDSORT_CACHE_NAMES false // Keep sorted items in RAM longer for speedy performance. Most expensive option. + #define SDSORT_CACHE_NAMES true // Keep sorted items in RAM longer for speedy performance. Most expensive option. #define SDSORT_DYNAMIC_RAM false // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use! #define SDSORT_CACHE_VFATS 2 // Maximum number of 13-byte VFAT entries to use for sorting. // Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM. @@ -1381,10 +1383,10 @@ //#define UTF_FILENAME_SUPPORT // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT + #define LONG_FILENAME_HOST_SUPPORT // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES + #define SCROLL_LONG_FILENAMES // Leave the heaters on after Stop Print (not recommended!) //#define SD_ABORT_NO_COOLDOWN @@ -1476,7 +1478,7 @@ * * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] */ - //#define SDCARD_CONNECTION LCD + #define SDCARD_CONNECTION ONBOARD // Enable if SD detect is rendered useless (e.g., by using an SD extender) //#define NO_SD_DETECT @@ -1790,7 +1792,7 @@ * * Warning: Does not respect endstops! */ -//#define BABYSTEPPING +#define BABYSTEPPING #if ENABLED(BABYSTEPPING) //#define INTEGRATED_BABYSTEPPING // EXPERIMENTAL integration of babystepping into the Stepper ISR //#define BABYSTEP_WITHOUT_HOMING @@ -1801,7 +1803,7 @@ #define BABYSTEP_MULTIPLICATOR_Z 1 // (steps or mm) Steps or millimeter distance for each Z babystep #define BABYSTEP_MULTIPLICATOR_XY 1 // (steps or mm) Steps or millimeter distance for each XY babystep - //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. + #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. // Note: Extra time may be added to mitigate controller latency. @@ -1837,12 +1839,12 @@ * * See https://marlinfw.org/docs/features/lin_advance.html for full instructions. */ -//#define LIN_ADVANCE +#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) //#define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants - #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed + #define LIN_ADVANCE_K 0.0 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // If enabled, this will generate debug information output over USB. - //#define EXPERIMENTAL_SCURVE // Enable this option to permit S-Curve Acceleration + #define EXPERIMENTAL_SCURVE // Enable this option to permit S-Curve Acceleration #endif // @section leveling @@ -1982,7 +1984,7 @@ // // G2/G3 Arc Support // -#define ARC_SUPPORT // Disable this feature to save ~3226 bytes +//#define ARC_SUPPORT // Disable this feature to save ~3226 bytes #if ENABLED(ARC_SUPPORT) #define MM_PER_ARC_SEGMENT 1 // (mm) Length (or minimum length) of each arc segment //#define ARC_SEGMENTS_PER_R 1 // Max segment length, MM_PER = Min @@ -2141,7 +2143,7 @@ * Currently handles M108, M112, M410, M876 * NOTE: Not yet implemented for all platforms. */ -//#define EMERGENCY_PARSER +#define EMERGENCY_PARSER /** * Realtime Reporting (requires EMERGENCY_PARSER) @@ -2311,14 +2313,14 @@ * * Enable PARK_HEAD_ON_PAUSE to add the G-code M125 Pause and Park. */ -//#define ADVANCED_PAUSE_FEATURE +#define ADVANCED_PAUSE_FEATURE #if ENABLED(ADVANCED_PAUSE_FEATURE) #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. // This short retract is done immediately, before parking the nozzle. #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast. #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload. + #define FILAMENT_CHANGE_UNLOAD_LENGTH 400 // (mm) The length of filament for a complete unload. // For Bowden, the full length of the tube and nozzle. // For direct drive, the full length of the nozzle. // Set to 0 for manual unloading. @@ -2327,7 +2329,7 @@ // 0 to disable start loading and skip to fast load only #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast. #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle. + #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 350 // (mm) Load length of filament, from extruder gear to nozzle. // For Bowden, the full length of the tube and nozzle. // For direct drive, the full length of the nozzle. //#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted. @@ -2349,10 +2351,10 @@ #define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed. #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change. - //#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. - //#define HOME_BEFORE_FILAMENT_CHANGE // If needed, home before parking for filament change + #define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. + #define HOME_BEFORE_FILAMENT_CHANGE // If needed, home before parking for filament change - //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. + #define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) #endif @@ -2493,8 +2495,8 @@ #define INTERPOLATE true #if AXIS_IS_TMC(X) - #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. - #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for sensorless homing + #define X_CURRENT 580 // (mA) RMS current. Multiply by 1.414 for peak current. + #define X_CURRENT_HOME (X_CURRENT/2) // (mA) RMS current for sensorless homing #define X_MICROSTEPS 16 // 0..256 #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... @@ -2511,8 +2513,8 @@ #endif #if AXIS_IS_TMC(Y) - #define Y_CURRENT 800 - #define Y_CURRENT_HOME Y_CURRENT + #define Y_CURRENT 580 + #define Y_CURRENT_HOME (Y_CURRENT/2) #define Y_MICROSTEPS 16 #define Y_RSENSE 0.11 #define Y_CHAIN_POS -1 @@ -2529,7 +2531,7 @@ #endif #if AXIS_IS_TMC(Z) - #define Z_CURRENT 800 + #define Z_CURRENT 580 #define Z_CURRENT_HOME Z_CURRENT #define Z_MICROSTEPS 16 #define Z_RSENSE 0.11 @@ -2565,7 +2567,7 @@ #endif #if AXIS_IS_TMC(E0) - #define E0_CURRENT 800 + #define E0_CURRENT 650 #define E0_MICROSTEPS 16 #define E0_RSENSE 0.11 #define E0_CHAIN_POS -1 @@ -2670,15 +2672,15 @@ * Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers * on the same serial port, either here or in your board's pins file. */ - //#define X_SLAVE_ADDRESS 0 - //#define Y_SLAVE_ADDRESS 0 - //#define Z_SLAVE_ADDRESS 0 + #define X_SLAVE_ADDRESS 0 + #define Y_SLAVE_ADDRESS 2 + #define Z_SLAVE_ADDRESS 1 //#define X2_SLAVE_ADDRESS 0 //#define Y2_SLAVE_ADDRESS 0 //#define Z2_SLAVE_ADDRESS 0 //#define Z3_SLAVE_ADDRESS 0 //#define Z4_SLAVE_ADDRESS 0 - //#define E0_SLAVE_ADDRESS 0 + #define E0_SLAVE_ADDRESS 3 //#define E1_SLAVE_ADDRESS 0 //#define E2_SLAVE_ADDRESS 0 //#define E3_SLAVE_ADDRESS 0 @@ -2719,7 +2721,7 @@ * Define your own with: * { , , hysteresis_start[1..8] } */ - #define CHOPPER_TIMING CHOPPER_DEFAULT_12V // All axes (override below) + #define CHOPPER_TIMING CHOPPER_DEFAULT_24V // All axes (override below) //#define CHOPPER_TIMING_X CHOPPER_TIMING // For X Axes (override below) //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X //#define CHOPPER_TIMING_Y CHOPPER_TIMING // For Y Axes (override below) @@ -2811,16 +2813,16 @@ #if EITHER(SENSORLESS_HOMING, SENSORLESS_PROBING) // TMC2209: 0...255. TMC2130: -64...63 - #define X_STALL_SENSITIVITY 8 + #define X_STALL_SENSITIVITY 75 #define X2_STALL_SENSITIVITY X_STALL_SENSITIVITY - #define Y_STALL_SENSITIVITY 8 + #define Y_STALL_SENSITIVITY 75 #define Y2_STALL_SENSITIVITY Y_STALL_SENSITIVITY //#define Z_STALL_SENSITIVITY 8 //#define Z2_STALL_SENSITIVITY Z_STALL_SENSITIVITY //#define Z3_STALL_SENSITIVITY Z_STALL_SENSITIVITY //#define Z4_STALL_SENSITIVITY Z_STALL_SENSITIVITY //#define SPI_ENDSTOPS // TMC2130 only - //#define IMPROVE_HOMING_RELIABILITY + #define IMPROVE_HOMING_RELIABILITY #endif /** @@ -2839,7 +2841,7 @@ * Beta feature! * Create a 50/50 square wave step pulse optimal for stepper drivers. */ - //#define SQUARE_WAVE_STEPPING + #define SQUARE_WAVE_STEPPING /** * Enable M122 debugging command for TMC stepper drivers. diff --git a/config/examples/Creality/Ender-3/CrealityV1/Configuration.h b/config/examples/Creality/Ender-3/CrealityV1/Configuration.h index 78c2dc9160..7ee8b00c48 100644 --- a/config/examples/Creality/Ender-3/CrealityV1/Configuration.h +++ b/config/examples/Creality/Ender-3/CrealityV1/Configuration.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Creality/Ender-3/CrealityV1" + /** * Configuration.h * @@ -69,7 +71,7 @@ // @section info // Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes. +#define STRING_CONFIG_H_AUTHOR "(thisiskeithb, Ender-3)" // Who made the changes. //#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) /** @@ -87,10 +89,10 @@ #define SHOW_BOOTSCREEN // Show the bitmap in Marlin/_Bootscreen.h on startup. -//#define SHOW_CUSTOM_BOOTSCREEN +#define SHOW_CUSTOM_BOOTSCREEN // Show the bitmap in Marlin/_Statusscreen.h on the status screen. -//#define CUSTOM_STATUS_SCREEN_IMAGE +#define CUSTOM_STATUS_SCREEN_IMAGE // @section machine @@ -127,18 +129,18 @@ * * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ -#define BAUDRATE 250000 +#define BAUDRATE 115200 // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH // Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_RAMPS_14_EFB + #define MOTHERBOARD BOARD_MELZI_CREALITY #endif // Name displayed in the LCD "Ready" message and Info menu -//#define CUSTOM_MACHINE_NAME "3D Printer" +#define CUSTOM_MACHINE_NAME "Ender-3" // Printer's unique ID, used by some programs to differentiate between machines. // Choose your own or use a service like https://www.uuidgenerator.net/version4 @@ -424,7 +426,7 @@ #define TEMP_SENSOR_5 0 #define TEMP_SENSOR_6 0 #define TEMP_SENSOR_7 0 -#define TEMP_SENSOR_BED 0 +#define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 #define TEMP_SENSOR_COOLER 0 @@ -480,7 +482,7 @@ #define HEATER_5_MAXTEMP 275 #define HEATER_6_MAXTEMP 275 #define HEATER_7_MAXTEMP 275 -#define BED_MAXTEMP 150 +#define BED_MAXTEMP 125 #define CHAMBER_MAXTEMP 60 /** @@ -505,21 +507,22 @@ #define PID_K1 0.95 // Smoothing factor within any PID loop #if ENABLED(PIDTEMP) - //#define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) - //#define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) + #define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) + #define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) // Set/get with gcode: M301 E[extruder number, 0-2] + // Creality Ender-3 #if ENABLED(PID_PARAMS_PER_HOTEND) // Specify between 1 and HOTENDS values per array. // If fewer than EXTRUDER values are provided, the last element will be repeated. - #define DEFAULT_Kp_LIST { 22.20, 22.20 } - #define DEFAULT_Ki_LIST { 1.08, 1.08 } - #define DEFAULT_Kd_LIST { 114.00, 114.00 } + #define DEFAULT_Kp_LIST { 21.73, 21.73 } + #define DEFAULT_Ki_LIST { 1.54, 1.54 } + #define DEFAULT_Kd_LIST { 76.55, 76.55 } #else - #define DEFAULT_Kp 22.20 - #define DEFAULT_Ki 1.08 - #define DEFAULT_Kd 114.00 + #define DEFAULT_Kp 21.73 + #define DEFAULT_Ki 1.54 + #define DEFAULT_Kd 76.55 #endif #endif // PIDTEMP @@ -806,14 +809,14 @@ * Override with M92 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 500 } +#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 93 } /** * Default Max Feed Rate (mm/s) * Override with M203 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 } +#define DEFAULT_MAX_FEEDRATE { 500, 500, 5, 25 } //#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 #if ENABLED(LIMITED_MAX_FR_EDITING) @@ -826,7 +829,7 @@ * Override with M201 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 } +#define DEFAULT_MAX_ACCELERATION { 500, 500, 100, 5000 } //#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 #if ENABLED(LIMITED_MAX_ACCEL_EDITING) @@ -841,9 +844,9 @@ * M204 R Retract Acceleration * M204 T Travel Acceleration */ -#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves +#define DEFAULT_ACCELERATION 500 // X, Y, Z and E acceleration for printing moves +#define DEFAULT_RETRACT_ACCELERATION 500 // E acceleration for retracts +#define DEFAULT_TRAVEL_ACCELERATION 500 // X, Y, Z acceleration for travel (non printing) moves /** * Default Jerk limits (mm/s) @@ -877,7 +880,7 @@ * https://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html */ #if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.013 // (mm) Distance from real junction edge + #define JUNCTION_DEVIATION_MM 0.08 // (mm) Distance from real junction edge #define JD_HANDLE_SMALL_SEGMENTS // Use curvature estimation instead of just the junction angle // for small segments (< 1mm) with large junction angles (> 135°). #endif @@ -1185,19 +1188,19 @@ // @section extruder #define DISABLE_E false // Disable the extruder when not stepping -#define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled +//#define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled // @section machine // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR false +#define INVERT_X_DIR true #define INVERT_Y_DIR true #define INVERT_Z_DIR false // @section extruder // For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR false +#define INVERT_E0_DIR true #define INVERT_E1_DIR false #define INVERT_E2_DIR false #define INVERT_E3_DIR false @@ -1232,8 +1235,8 @@ // @section machine // The size of the printable area -#define X_BED_SIZE 200 -#define Y_BED_SIZE 200 +#define X_BED_SIZE 235 +#define Y_BED_SIZE 235 // Travel limits (mm) after homing, corresponding to endstop positions. #define X_MIN_POS 0 @@ -1241,7 +1244,7 @@ #define Z_MIN_POS 0 #define X_MAX_POS X_BED_SIZE #define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 200 +#define Z_MAX_POS 250 /** * Software Endstops @@ -1595,7 +1598,7 @@ #endif // Homing speeds (mm/min) -#define HOMING_FEEDRATE_MM_M { (50*60), (50*60), (4*60) } +#define HOMING_FEEDRATE_MM_M { (20*60), (20*60), (4*60) } // Validate that endstops are triggered on homing moves #define VALIDATE_HOMING_ENDSTOPS @@ -1672,7 +1675,7 @@ * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) */ -//#define EEPROM_SETTINGS // Persistent storage with M500 and M501 +#define EEPROM_SETTINGS // Persistent storage with M500 and M501 //#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. #define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load @@ -1706,16 +1709,16 @@ // Preheat Constants - Up to 5 are supported without changes // #define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 180 -#define PREHEAT_1_TEMP_BED 70 +#define PREHEAT_1_TEMP_HOTEND 185 +#define PREHEAT_1_TEMP_BED 45 #define PREHEAT_1_TEMP_CHAMBER 35 -#define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 +#define PREHEAT_1_FAN_SPEED 255 // Value from 0 to 255 #define PREHEAT_2_LABEL "ABS" #define PREHEAT_2_TEMP_HOTEND 240 -#define PREHEAT_2_TEMP_BED 110 +#define PREHEAT_2_TEMP_BED 70 #define PREHEAT_2_TEMP_CHAMBER 35 -#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 +#define PREHEAT_2_FAN_SPEED 255 // Value from 0 to 255 /** * Nozzle Park @@ -1936,7 +1939,7 @@ * SD Card support is disabled by default. If your controller has an SD slot, * you must uncomment the following option or it won't work. */ -//#define SDSUPPORT +#define SDSUPPORT /** * SD CARD: ENABLE CRC @@ -2014,7 +2017,7 @@ // If you have a speaker that can produce tones, enable it here. // By default Marlin assumes you have a buzzer with a fixed frequency. // -//#define SPEAKER +#define SPEAKER // // The duration and frequency for the UI feedback sound. @@ -2287,7 +2290,7 @@ // This is RAMPS-compatible using a single 10-pin connector. // (For CR-10 owners who want to replace the Melzi Creality board but retain the display) // -//#define CR10_STOCKDISPLAY +#define CR10_STOCKDISPLAY // // Ender-2 OEM display, a variant of the MKS_MINI_12864 diff --git a/config/examples/Creality/Ender-3/CrealityV1/Configuration_adv.h b/config/examples/Creality/Ender-3/CrealityV1/Configuration_adv.h index 5335fa012a..8a0b13d4e2 100644 --- a/config/examples/Creality/Ender-3/CrealityV1/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/CrealityV1/Configuration_adv.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Creality/Ender-3/CrealityV1" + /** * Configuration_adv.h * @@ -741,7 +743,7 @@ //#define HOMING_BACKOFF_POST_MM { 2, 2, 2 } // (mm) Backoff from endstops after homing -//#define QUICK_HOME // If G28 contains XY do a diagonal move first +#define QUICK_HOME // If G28 contains XY do a diagonal move first //#define HOME_Y_BEFORE_X // If G28 contains XY home Y before X //#define HOME_Z_FIRST // Home Z first. Requires a Z-MIN endstop (not a probe). //#define CODEPENDENT_XY_HOMING // If X/Y can't home without homing Y/X first @@ -792,7 +794,7 @@ * differs, a mode set eeprom write will be completed at initialization. * Use the option below to force an eeprom write to a V3.1 probe regardless. */ - //#define BLTOUCH_SET_5V_MODE + #define BLTOUCH_SET_5V_MODE /** * Safety: Activate if connecting a probe with an unknown voltage mode. @@ -867,7 +869,7 @@ // On a 300mm bed a 5% grade would give a misalignment of ~1.5cm #define G34_MAX_GRADE 5 // (%) Maximum incline that G34 will handle - #define Z_STEPPER_ALIGN_ITERATIONS 5 // Number of iterations to apply during alignment + #define Z_STEPPER_ALIGN_ITERATIONS 3 // Number of iterations to apply during alignment #define Z_STEPPER_ALIGN_ACC 0.02 // Stop iterating early if the accuracy is better than this #define RESTORE_LEVELING_AFTER_G34 // Restore leveling after G34 is done? // After G34, re-home Z (G28 Z) or just calculate it from the last probe heights? @@ -1175,7 +1177,7 @@ #endif // Include a page of printer information in the LCD Main Menu - //#define LCD_INFO_MENU + #define LCD_INFO_MENU #if ENABLED(LCD_INFO_MENU) //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages #endif @@ -1229,7 +1231,7 @@ #endif // Scroll a longer status message into view - //#define STATUS_MESSAGE_SCROLLING + #define STATUS_MESSAGE_SCROLLING // On the Info Screen, display XY with one decimal place when possible //#define LCD_DECIMAL_SMALL_XY @@ -1281,7 +1283,7 @@ //#define SD_DETECT_STATE HIGH //#define SD_IGNORE_AT_STARTUP // Don't mount the SD card when starting up - //#define SDCARD_READONLY // Read-only SD card (to save over 2K of flash) + #define SDCARD_READONLY // Read-only SD card (to save over 2K of flash) //#define GCODE_REPEAT_MARKERS // Enable G-code M808 to set repeat markers and do looping @@ -1384,7 +1386,7 @@ //#define LONG_FILENAME_HOST_SUPPORT // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES + #define SCROLL_LONG_FILENAMES // Leave the heaters on after Stop Print (not recommended!) //#define SD_ABORT_NO_COOLDOWN @@ -1790,7 +1792,7 @@ * * Warning: Does not respect endstops! */ -//#define BABYSTEPPING +#define BABYSTEPPING #if ENABLED(BABYSTEPPING) //#define INTEGRATED_BABYSTEPPING // EXPERIMENTAL integration of babystepping into the Stepper ISR //#define BABYSTEP_WITHOUT_HOMING @@ -1801,7 +1803,7 @@ #define BABYSTEP_MULTIPLICATOR_Z 1 // (steps or mm) Steps or millimeter distance for each Z babystep #define BABYSTEP_MULTIPLICATOR_XY 1 // (steps or mm) Steps or millimeter distance for each XY babystep - //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. + #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. // Note: Extra time may be added to mitigate controller latency. @@ -2493,7 +2495,7 @@ #define INTERPOLATE true #if AXIS_IS_TMC(X) - #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. + #define X_CURRENT 580 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for sensorless homing #define X_MICROSTEPS 16 // 0..256 #define X_RSENSE 0.11 @@ -2511,7 +2513,7 @@ #endif #if AXIS_IS_TMC(Y) - #define Y_CURRENT 800 + #define Y_CURRENT 580 #define Y_CURRENT_HOME Y_CURRENT #define Y_MICROSTEPS 16 #define Y_RSENSE 0.11 @@ -2529,7 +2531,7 @@ #endif #if AXIS_IS_TMC(Z) - #define Z_CURRENT 800 + #define Z_CURRENT 580 #define Z_CURRENT_HOME Z_CURRENT #define Z_MICROSTEPS 16 #define Z_RSENSE 0.11 @@ -2565,7 +2567,7 @@ #endif #if AXIS_IS_TMC(E0) - #define E0_CURRENT 800 + #define E0_CURRENT 650 #define E0_MICROSTEPS 16 #define E0_RSENSE 0.11 #define E0_CHAIN_POS -1 @@ -2719,7 +2721,7 @@ * Define your own with: * { , , hysteresis_start[1..8] } */ - #define CHOPPER_TIMING CHOPPER_DEFAULT_12V // All axes (override below) + #define CHOPPER_TIMING CHOPPER_DEFAULT_24V // All axes (override below) //#define CHOPPER_TIMING_X CHOPPER_TIMING // For X Axes (override below) //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X //#define CHOPPER_TIMING_Y CHOPPER_TIMING // For Y Axes (override below) diff --git a/config/examples/Creality/Ender-3/CrealityV422/Configuration.h b/config/examples/Creality/Ender-3/CrealityV422/Configuration.h index 78c2dc9160..8010c65350 100644 --- a/config/examples/Creality/Ender-3/CrealityV422/Configuration.h +++ b/config/examples/Creality/Ender-3/CrealityV422/Configuration.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Creality/Ender-3/CrealityV422" + /** * Configuration.h * @@ -69,7 +71,7 @@ // @section info // Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes. +#define STRING_CONFIG_H_AUTHOR "(Dust, valerionew, Ender-3)" // Who made the changes. //#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) /** @@ -87,10 +89,10 @@ #define SHOW_BOOTSCREEN // Show the bitmap in Marlin/_Bootscreen.h on startup. -//#define SHOW_CUSTOM_BOOTSCREEN +#define SHOW_CUSTOM_BOOTSCREEN // Show the bitmap in Marlin/_Statusscreen.h on the status screen. -//#define CUSTOM_STATUS_SCREEN_IMAGE +#define CUSTOM_STATUS_SCREEN_IMAGE // @section machine @@ -102,7 +104,7 @@ * * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] */ -#define SERIAL_PORT 0 +#define SERIAL_PORT 1 /** * Select a secondary serial port on the board to use for communication with the host. @@ -127,18 +129,18 @@ * * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ -#define BAUDRATE 250000 +#define BAUDRATE 115200 // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH // Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_RAMPS_14_EFB + #define MOTHERBOARD BOARD_CREALITY_V4 #endif // Name displayed in the LCD "Ready" message and Info menu -//#define CUSTOM_MACHINE_NAME "3D Printer" +#define CUSTOM_MACHINE_NAME "Ender-3 4.2.2" // Printer's unique ID, used by some programs to differentiate between machines. // Choose your own or use a service like https://www.uuidgenerator.net/version4 @@ -424,7 +426,7 @@ #define TEMP_SENSOR_5 0 #define TEMP_SENSOR_6 0 #define TEMP_SENSOR_7 0 -#define TEMP_SENSOR_BED 0 +#define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 #define TEMP_SENSOR_COOLER 0 @@ -480,7 +482,7 @@ #define HEATER_5_MAXTEMP 275 #define HEATER_6_MAXTEMP 275 #define HEATER_7_MAXTEMP 275 -#define BED_MAXTEMP 150 +#define BED_MAXTEMP 125 #define CHAMBER_MAXTEMP 60 /** @@ -505,21 +507,22 @@ #define PID_K1 0.95 // Smoothing factor within any PID loop #if ENABLED(PIDTEMP) - //#define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) - //#define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) + #define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) + #define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) // Set/get with gcode: M301 E[extruder number, 0-2] + // Creality Ender-3 #if ENABLED(PID_PARAMS_PER_HOTEND) // Specify between 1 and HOTENDS values per array. // If fewer than EXTRUDER values are provided, the last element will be repeated. - #define DEFAULT_Kp_LIST { 22.20, 22.20 } - #define DEFAULT_Ki_LIST { 1.08, 1.08 } - #define DEFAULT_Kd_LIST { 114.00, 114.00 } + #define DEFAULT_Kp_LIST { 21.73, 21.73 } + #define DEFAULT_Ki_LIST { 1.54, 1.54 } + #define DEFAULT_Kd_LIST { 76.55, 76.55 } #else - #define DEFAULT_Kp 22.20 - #define DEFAULT_Ki 1.08 - #define DEFAULT_Kd 114.00 + #define DEFAULT_Kp 21.73 + #define DEFAULT_Ki 1.54 + #define DEFAULT_Kd 76.55 #endif #endif // PIDTEMP @@ -556,12 +559,18 @@ //#define MIN_BED_POWER 0 //#define PID_BED_DEBUG // Sends debug data to the serial port. - // 120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - // from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) + //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) + //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) #define DEFAULT_bedKp 10.00 #define DEFAULT_bedKi .023 #define DEFAULT_bedKd 305.4 + //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) + //from pidautotune + //#define DEFAULT_bedKp 97.1 + //#define DEFAULT_bedKi 1.41 + //#define DEFAULT_bedKd 1675.16 + // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. #endif // PIDTEMPBED @@ -743,15 +752,15 @@ * TMC5130, TMC5130_STANDALONE, TMC5160, TMC5160_STANDALONE * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'L6474', 'POWERSTEP01', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2160', 'TMC2160_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC2209', 'TMC2209_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE', 'TMC5160', 'TMC5160_STANDALONE'] */ -#define X_DRIVER_TYPE A4988 -#define Y_DRIVER_TYPE A4988 -#define Z_DRIVER_TYPE A4988 +//#define X_DRIVER_TYPE A4988 +//#define Y_DRIVER_TYPE A4988 +//#define Z_DRIVER_TYPE A4988 //#define X2_DRIVER_TYPE A4988 //#define Y2_DRIVER_TYPE A4988 //#define Z2_DRIVER_TYPE A4988 //#define Z3_DRIVER_TYPE A4988 //#define Z4_DRIVER_TYPE A4988 -#define E0_DRIVER_TYPE A4988 +//#define E0_DRIVER_TYPE A4988 //#define E1_DRIVER_TYPE A4988 //#define E2_DRIVER_TYPE A4988 //#define E3_DRIVER_TYPE A4988 @@ -806,14 +815,14 @@ * Override with M92 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 500 } +#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 93 } /** * Default Max Feed Rate (mm/s) * Override with M203 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 } +#define DEFAULT_MAX_FEEDRATE { 500, 500, 5, 25 } //#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 #if ENABLED(LIMITED_MAX_FR_EDITING) @@ -826,7 +835,7 @@ * Override with M201 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 } +#define DEFAULT_MAX_ACCELERATION { 500, 500, 100, 5000 } //#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 #if ENABLED(LIMITED_MAX_ACCEL_EDITING) @@ -841,9 +850,9 @@ * M204 R Retract Acceleration * M204 T Travel Acceleration */ -#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves +#define DEFAULT_ACCELERATION 500 // X, Y, Z and E acceleration for printing moves +#define DEFAULT_RETRACT_ACCELERATION 500 // E acceleration for retracts +#define DEFAULT_TRAVEL_ACCELERATION 500 // X, Y, Z acceleration for travel (non printing) moves /** * Default Jerk limits (mm/s) @@ -877,7 +886,7 @@ * https://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html */ #if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.013 // (mm) Distance from real junction edge + #define JUNCTION_DEVIATION_MM 0.08 // (mm) Distance from real junction edge #define JD_HANDLE_SMALL_SEGMENTS // Use curvature estimation instead of just the junction angle // for small segments (< 1mm) with large junction angles (> 135°). #endif @@ -890,7 +899,7 @@ * * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained */ -//#define S_CURVE_ACCELERATION +#define S_CURVE_ACCELERATION //=========================================================================== //============================= Z Probe Options ============================= @@ -1185,14 +1194,14 @@ // @section extruder #define DISABLE_E false // Disable the extruder when not stepping -#define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled +//#define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled // @section machine // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR false -#define INVERT_Y_DIR true -#define INVERT_Z_DIR false +#define INVERT_Y_DIR false +#define INVERT_Z_DIR true // @section extruder @@ -1208,8 +1217,8 @@ // @section homing -//#define NO_MOTION_BEFORE_HOMING // Inhibit movement until all axes have been homed. Also enable HOME_AFTER_DEACTIVATE for extra safety. -//#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated. Also enable NO_MOTION_BEFORE_HOMING for extra safety. +//#define NO_MOTION_BEFORE_HOMING // Inhibit movement until all axes have been homed + /** * Set Z_IDLE_HEIGHT if the Z-Axis moves on its own when steppers are disabled. @@ -1232,8 +1241,8 @@ // @section machine // The size of the printable area -#define X_BED_SIZE 200 -#define Y_BED_SIZE 200 +#define X_BED_SIZE 235 +#define Y_BED_SIZE 235 // Travel limits (mm) after homing, corresponding to endstop positions. #define X_MIN_POS 0 @@ -1241,7 +1250,7 @@ #define Z_MIN_POS 0 #define X_MAX_POS X_BED_SIZE #define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 200 +#define Z_MAX_POS 250 /** * Software Endstops @@ -1296,39 +1305,6 @@ //#define WATCH_ALL_RUNOUT_SENSORS // Execute runout script on any triggering sensor, not only for the active extruder. // This is automatically enabled for MIXING_EXTRUDERs. - // Override individually if the runout sensors vary - //#define FIL_RUNOUT1_STATE LOW - //#define FIL_RUNOUT1_PULLUP - //#define FIL_RUNOUT1_PULLDOWN - - //#define FIL_RUNOUT2_STATE LOW - //#define FIL_RUNOUT2_PULLUP - //#define FIL_RUNOUT2_PULLDOWN - - //#define FIL_RUNOUT3_STATE LOW - //#define FIL_RUNOUT3_PULLUP - //#define FIL_RUNOUT3_PULLDOWN - - //#define FIL_RUNOUT4_STATE LOW - //#define FIL_RUNOUT4_PULLUP - //#define FIL_RUNOUT4_PULLDOWN - - //#define FIL_RUNOUT5_STATE LOW - //#define FIL_RUNOUT5_PULLUP - //#define FIL_RUNOUT5_PULLDOWN - - //#define FIL_RUNOUT6_STATE LOW - //#define FIL_RUNOUT6_PULLUP - //#define FIL_RUNOUT6_PULLDOWN - - //#define FIL_RUNOUT7_STATE LOW - //#define FIL_RUNOUT7_PULLUP - //#define FIL_RUNOUT7_PULLDOWN - - //#define FIL_RUNOUT8_STATE LOW - //#define FIL_RUNOUT8_PULLUP - //#define FIL_RUNOUT8_PULLDOWN - // Commands to execute on filament runout. // With multiple runout sensors use the %c placeholder for the current tool in commands (e.g., "M600 T%c") // NOTE: After 'M412 H1' the host handles filament runout and this script does not apply. @@ -1425,9 +1401,6 @@ // at which point movement will be level to the machine's XY plane. // The height can be set with M420 Z #define ENABLE_LEVELING_FADE_HEIGHT - #if ENABLED(ENABLE_LEVELING_FADE_HEIGHT) - #define DEFAULT_LEVELING_FADE_HEIGHT 10.0 // (mm) Default fade height. - #endif // For Cartesian machines, instead of dividing moves on mesh boundaries, // split up moves into short segments like a Delta. This follows the @@ -1534,31 +1507,6 @@ #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points //#define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK - #endif - - /** - * Corner Leveling Order - * - * Set 2 or 4 points. When 2 points are given, the 3rd is the center of the opposite edge. - * - * LF Left-Front RF Right-Front - * LB Left-Back RB Right-Back - * - * Examples: - * - * Default {LF,RB,LB,RF} {LF,RF} {LB,LF} - * LB --------- RB LB --------- RB LB --------- RB LB --------- RB - * | 4 3 | | 3 2 | | <3> | | 1 | - * | | | | | | | <3>| - * | 1 2 | | 1 4 | | 1 2 | | 2 | - * LF --------- RF LF --------- RF LF --------- RF LF --------- RF - */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } #endif /** @@ -1595,7 +1543,7 @@ #endif // Homing speeds (mm/min) -#define HOMING_FEEDRATE_MM_M { (50*60), (50*60), (4*60) } +#define HOMING_FEEDRATE_MM_M { (20*60), (20*60), (4*60) } // Validate that endstops are triggered on homing moves #define VALIDATE_HOMING_ENDSTOPS @@ -1672,7 +1620,7 @@ * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) */ -//#define EEPROM_SETTINGS // Persistent storage with M500 and M501 +#define EEPROM_SETTINGS // Persistent storage with M500 and M501 //#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. #define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load @@ -1706,16 +1654,16 @@ // Preheat Constants - Up to 5 are supported without changes // #define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 180 -#define PREHEAT_1_TEMP_BED 70 +#define PREHEAT_1_TEMP_HOTEND 220 +#define PREHEAT_1_TEMP_BED 45 #define PREHEAT_1_TEMP_CHAMBER 35 -#define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 +#define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 #define PREHEAT_2_LABEL "ABS" #define PREHEAT_2_TEMP_HOTEND 240 -#define PREHEAT_2_TEMP_BED 110 +#define PREHEAT_2_TEMP_BED 60 #define PREHEAT_2_TEMP_CHAMBER 35 -#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 +#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 /** * Nozzle Park @@ -1936,7 +1884,7 @@ * SD Card support is disabled by default. If your controller has an SD slot, * you must uncomment the following option or it won't work. */ -//#define SDSUPPORT +#define SDSUPPORT /** * SD CARD: ENABLE CRC @@ -2014,7 +1962,7 @@ // If you have a speaker that can produce tones, enable it here. // By default Marlin assumes you have a buzzer with a fixed frequency. // -//#define SPEAKER +#define SPEAKER // // The duration and frequency for the UI feedback sound. @@ -2287,7 +2235,10 @@ // This is RAMPS-compatible using a single 10-pin connector. // (For CR-10 owners who want to replace the Melzi Creality board but retain the display) // -//#define CR10_STOCKDISPLAY +#define CR10_STOCKDISPLAY +#if ENABLED(CR10_STOCKDISPLAY) + #define RET6_12864_LCD // Specific to the SoC (can either be RET / VET) +#endif // // Ender-2 OEM display, a variant of the MKS_MINI_12864 @@ -2393,6 +2344,11 @@ #define USE_MKS_GREEN_UI #endif +// +// CR-6 OEM touch screen. A DWIN display with touch. +// +//#define DGUS_LCD_UI_CREALITY_TOUCH + // // Touch-screen LCD for Malyan M200/M300 printers // diff --git a/config/examples/Creality/Ender-3/CrealityV422/Configuration_adv.h b/config/examples/Creality/Ender-3/CrealityV422/Configuration_adv.h index 5335fa012a..c474a38c23 100644 --- a/config/examples/Creality/Ender-3/CrealityV422/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/CrealityV422/Configuration_adv.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Creality/Ender-3/CrealityV422" + /** * Configuration_adv.h * @@ -741,7 +743,7 @@ //#define HOMING_BACKOFF_POST_MM { 2, 2, 2 } // (mm) Backoff from endstops after homing -//#define QUICK_HOME // If G28 contains XY do a diagonal move first +#define QUICK_HOME // If G28 contains XY do a diagonal move first //#define HOME_Y_BEFORE_X // If G28 contains XY home Y before X //#define HOME_Z_FIRST // Home Z first. Requires a Z-MIN endstop (not a probe). //#define CODEPENDENT_XY_HOMING // If X/Y can't home without homing Y/X first @@ -792,7 +794,7 @@ * differs, a mode set eeprom write will be completed at initialization. * Use the option below to force an eeprom write to a V3.1 probe regardless. */ - //#define BLTOUCH_SET_5V_MODE + #define BLTOUCH_SET_5V_MODE /** * Safety: Activate if connecting a probe with an unknown voltage mode. @@ -867,7 +869,7 @@ // On a 300mm bed a 5% grade would give a misalignment of ~1.5cm #define G34_MAX_GRADE 5 // (%) Maximum incline that G34 will handle - #define Z_STEPPER_ALIGN_ITERATIONS 5 // Number of iterations to apply during alignment + #define Z_STEPPER_ALIGN_ITERATIONS 3 // Number of iterations to apply during alignment #define Z_STEPPER_ALIGN_ACC 0.02 // Stop iterating early if the accuracy is better than this #define RESTORE_LEVELING_AFTER_G34 // Restore leveling after G34 is done? // After G34, re-home Z (G28 Z) or just calculate it from the last probe heights? @@ -1175,7 +1177,7 @@ #endif // Include a page of printer information in the LCD Main Menu - //#define LCD_INFO_MENU + #define LCD_INFO_MENU #if ENABLED(LCD_INFO_MENU) //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages #endif @@ -1229,7 +1231,7 @@ #endif // Scroll a longer status message into view - //#define STATUS_MESSAGE_SCROLLING + #define STATUS_MESSAGE_SCROLLING // On the Info Screen, display XY with one decimal place when possible //#define LCD_DECIMAL_SMALL_XY @@ -1281,7 +1283,7 @@ //#define SD_DETECT_STATE HIGH //#define SD_IGNORE_AT_STARTUP // Don't mount the SD card when starting up - //#define SDCARD_READONLY // Read-only SD card (to save over 2K of flash) + #define SDCARD_READONLY // Read-only SD card (to save over 2K of flash) //#define GCODE_REPEAT_MARKERS // Enable G-code M808 to set repeat markers and do looping @@ -1384,7 +1386,7 @@ //#define LONG_FILENAME_HOST_SUPPORT // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES + #define SCROLL_LONG_FILENAMES // Leave the heaters on after Stop Print (not recommended!) //#define SD_ABORT_NO_COOLDOWN @@ -1790,7 +1792,7 @@ * * Warning: Does not respect endstops! */ -//#define BABYSTEPPING +#define BABYSTEPPING #if ENABLED(BABYSTEPPING) //#define INTEGRATED_BABYSTEPPING // EXPERIMENTAL integration of babystepping into the Stepper ISR //#define BABYSTEP_WITHOUT_HOMING @@ -1801,7 +1803,7 @@ #define BABYSTEP_MULTIPLICATOR_Z 1 // (steps or mm) Steps or millimeter distance for each Z babystep #define BABYSTEP_MULTIPLICATOR_XY 1 // (steps or mm) Steps or millimeter distance for each XY babystep - //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. + #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. // Note: Extra time may be added to mitigate controller latency. @@ -2493,7 +2495,7 @@ #define INTERPOLATE true #if AXIS_IS_TMC(X) - #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. + #define X_CURRENT 580 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for sensorless homing #define X_MICROSTEPS 16 // 0..256 #define X_RSENSE 0.11 @@ -2511,7 +2513,7 @@ #endif #if AXIS_IS_TMC(Y) - #define Y_CURRENT 800 + #define Y_CURRENT 580 #define Y_CURRENT_HOME Y_CURRENT #define Y_MICROSTEPS 16 #define Y_RSENSE 0.11 @@ -2529,7 +2531,7 @@ #endif #if AXIS_IS_TMC(Z) - #define Z_CURRENT 800 + #define Z_CURRENT 580 #define Z_CURRENT_HOME Z_CURRENT #define Z_MICROSTEPS 16 #define Z_RSENSE 0.11 @@ -2565,7 +2567,7 @@ #endif #if AXIS_IS_TMC(E0) - #define E0_CURRENT 800 + #define E0_CURRENT 650 #define E0_MICROSTEPS 16 #define E0_RSENSE 0.11 #define E0_CHAIN_POS -1 @@ -2719,7 +2721,7 @@ * Define your own with: * { , , hysteresis_start[1..8] } */ - #define CHOPPER_TIMING CHOPPER_DEFAULT_12V // All axes (override below) + #define CHOPPER_TIMING CHOPPER_DEFAULT_24V // All axes (override below) //#define CHOPPER_TIMING_X CHOPPER_TIMING // For X Axes (override below) //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X //#define CHOPPER_TIMING_Y CHOPPER_TIMING // For Y Axes (override below) diff --git a/config/examples/Creality/Ender-3/CrealityV427/Configuration.h b/config/examples/Creality/Ender-3/CrealityV427/Configuration.h index 78c2dc9160..00a2a68ccb 100644 --- a/config/examples/Creality/Ender-3/CrealityV427/Configuration.h +++ b/config/examples/Creality/Ender-3/CrealityV427/Configuration.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Creality/Ender-3/CrealityV427" + /** * Configuration.h * @@ -69,7 +71,7 @@ // @section info // Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes. +#define STRING_CONFIG_H_AUTHOR "(Dust, Ender-3)" // Who made the changes. //#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) /** @@ -87,10 +89,10 @@ #define SHOW_BOOTSCREEN // Show the bitmap in Marlin/_Bootscreen.h on startup. -//#define SHOW_CUSTOM_BOOTSCREEN +#define SHOW_CUSTOM_BOOTSCREEN // Show the bitmap in Marlin/_Statusscreen.h on the status screen. -//#define CUSTOM_STATUS_SCREEN_IMAGE +#define CUSTOM_STATUS_SCREEN_IMAGE // @section machine @@ -102,7 +104,7 @@ * * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] */ -#define SERIAL_PORT 0 +#define SERIAL_PORT 1 /** * Select a secondary serial port on the board to use for communication with the host. @@ -127,18 +129,18 @@ * * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ -#define BAUDRATE 250000 +#define BAUDRATE 115200 // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH // Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_RAMPS_14_EFB + #define MOTHERBOARD BOARD_CREALITY_V427 #endif // Name displayed in the LCD "Ready" message and Info menu -//#define CUSTOM_MACHINE_NAME "3D Printer" +#define CUSTOM_MACHINE_NAME "Ender-3 4.2.7" // Printer's unique ID, used by some programs to differentiate between machines. // Choose your own or use a service like https://www.uuidgenerator.net/version4 @@ -424,7 +426,7 @@ #define TEMP_SENSOR_5 0 #define TEMP_SENSOR_6 0 #define TEMP_SENSOR_7 0 -#define TEMP_SENSOR_BED 0 +#define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 #define TEMP_SENSOR_COOLER 0 @@ -480,7 +482,7 @@ #define HEATER_5_MAXTEMP 275 #define HEATER_6_MAXTEMP 275 #define HEATER_7_MAXTEMP 275 -#define BED_MAXTEMP 150 +#define BED_MAXTEMP 125 #define CHAMBER_MAXTEMP 60 /** @@ -505,21 +507,22 @@ #define PID_K1 0.95 // Smoothing factor within any PID loop #if ENABLED(PIDTEMP) - //#define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) - //#define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) + #define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) + #define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) // Set/get with gcode: M301 E[extruder number, 0-2] + // Creality Ender-3 #if ENABLED(PID_PARAMS_PER_HOTEND) // Specify between 1 and HOTENDS values per array. // If fewer than EXTRUDER values are provided, the last element will be repeated. - #define DEFAULT_Kp_LIST { 22.20, 22.20 } - #define DEFAULT_Ki_LIST { 1.08, 1.08 } - #define DEFAULT_Kd_LIST { 114.00, 114.00 } + #define DEFAULT_Kp_LIST { 21.73, 21.73 } + #define DEFAULT_Ki_LIST { 1.54, 1.54 } + #define DEFAULT_Kd_LIST { 76.55, 76.55 } #else - #define DEFAULT_Kp 22.20 - #define DEFAULT_Ki 1.08 - #define DEFAULT_Kd 114.00 + #define DEFAULT_Kp 21.73 + #define DEFAULT_Ki 1.54 + #define DEFAULT_Kd 76.55 #endif #endif // PIDTEMP @@ -556,12 +559,18 @@ //#define MIN_BED_POWER 0 //#define PID_BED_DEBUG // Sends debug data to the serial port. - // 120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - // from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) + //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) + //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) #define DEFAULT_bedKp 10.00 #define DEFAULT_bedKi .023 #define DEFAULT_bedKd 305.4 + //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) + //from pidautotune + //#define DEFAULT_bedKp 97.1 + //#define DEFAULT_bedKi 1.41 + //#define DEFAULT_bedKd 1675.16 + // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. #endif // PIDTEMPBED @@ -743,15 +752,15 @@ * TMC5130, TMC5130_STANDALONE, TMC5160, TMC5160_STANDALONE * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'L6474', 'POWERSTEP01', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2160', 'TMC2160_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC2209', 'TMC2209_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE', 'TMC5160', 'TMC5160_STANDALONE'] */ -#define X_DRIVER_TYPE A4988 -#define Y_DRIVER_TYPE A4988 -#define Z_DRIVER_TYPE A4988 +#define X_DRIVER_TYPE TMC2208_STANDALONE +#define Y_DRIVER_TYPE TMC2208_STANDALONE +#define Z_DRIVER_TYPE TMC2208_STANDALONE //#define X2_DRIVER_TYPE A4988 //#define Y2_DRIVER_TYPE A4988 //#define Z2_DRIVER_TYPE A4988 //#define Z3_DRIVER_TYPE A4988 //#define Z4_DRIVER_TYPE A4988 -#define E0_DRIVER_TYPE A4988 +#define E0_DRIVER_TYPE TMC2208_STANDALONE //#define E1_DRIVER_TYPE A4988 //#define E2_DRIVER_TYPE A4988 //#define E3_DRIVER_TYPE A4988 @@ -806,14 +815,14 @@ * Override with M92 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 500 } +#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 93 } /** * Default Max Feed Rate (mm/s) * Override with M203 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 } +#define DEFAULT_MAX_FEEDRATE { 500, 500, 5, 25 } //#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 #if ENABLED(LIMITED_MAX_FR_EDITING) @@ -826,7 +835,7 @@ * Override with M201 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 } +#define DEFAULT_MAX_ACCELERATION { 500, 500, 100, 5000 } //#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 #if ENABLED(LIMITED_MAX_ACCEL_EDITING) @@ -841,9 +850,9 @@ * M204 R Retract Acceleration * M204 T Travel Acceleration */ -#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves +#define DEFAULT_ACCELERATION 500 // X, Y, Z and E acceleration for printing moves +#define DEFAULT_RETRACT_ACCELERATION 500 // E acceleration for retracts +#define DEFAULT_TRAVEL_ACCELERATION 500 // X, Y, Z acceleration for travel (non printing) moves /** * Default Jerk limits (mm/s) @@ -877,7 +886,7 @@ * https://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html */ #if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.013 // (mm) Distance from real junction edge + #define JUNCTION_DEVIATION_MM 0.08 // (mm) Distance from real junction edge #define JD_HANDLE_SMALL_SEGMENTS // Use curvature estimation instead of just the junction angle // for small segments (< 1mm) with large junction angles (> 135°). #endif @@ -1185,14 +1194,14 @@ // @section extruder #define DISABLE_E false // Disable the extruder when not stepping -#define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled +//#define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled // @section machine // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR false -#define INVERT_Y_DIR true -#define INVERT_Z_DIR false +#define INVERT_Y_DIR false +#define INVERT_Z_DIR true // @section extruder @@ -1232,8 +1241,8 @@ // @section machine // The size of the printable area -#define X_BED_SIZE 200 -#define Y_BED_SIZE 200 +#define X_BED_SIZE 235 +#define Y_BED_SIZE 235 // Travel limits (mm) after homing, corresponding to endstop positions. #define X_MIN_POS 0 @@ -1241,7 +1250,7 @@ #define Z_MIN_POS 0 #define X_MAX_POS X_BED_SIZE #define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 200 +#define Z_MAX_POS 250 /** * Software Endstops @@ -1595,7 +1604,7 @@ #endif // Homing speeds (mm/min) -#define HOMING_FEEDRATE_MM_M { (50*60), (50*60), (4*60) } +#define HOMING_FEEDRATE_MM_M { (20*60), (20*60), (4*60) } // Validate that endstops are triggered on homing moves #define VALIDATE_HOMING_ENDSTOPS @@ -1672,7 +1681,7 @@ * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) */ -//#define EEPROM_SETTINGS // Persistent storage with M500 and M501 +#define EEPROM_SETTINGS // Persistent storage with M500 and M501 //#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. #define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load @@ -1706,16 +1715,16 @@ // Preheat Constants - Up to 5 are supported without changes // #define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 180 -#define PREHEAT_1_TEMP_BED 70 +#define PREHEAT_1_TEMP_HOTEND 185 +#define PREHEAT_1_TEMP_BED 45 #define PREHEAT_1_TEMP_CHAMBER 35 -#define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 +#define PREHEAT_1_FAN_SPEED 255 // Value from 0 to 255 #define PREHEAT_2_LABEL "ABS" #define PREHEAT_2_TEMP_HOTEND 240 -#define PREHEAT_2_TEMP_BED 110 +#define PREHEAT_2_TEMP_BED 70 #define PREHEAT_2_TEMP_CHAMBER 35 -#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 +#define PREHEAT_2_FAN_SPEED 255 // Value from 0 to 255 /** * Nozzle Park @@ -1936,7 +1945,7 @@ * SD Card support is disabled by default. If your controller has an SD slot, * you must uncomment the following option or it won't work. */ -//#define SDSUPPORT +#define SDSUPPORT /** * SD CARD: ENABLE CRC @@ -2014,7 +2023,7 @@ // If you have a speaker that can produce tones, enable it here. // By default Marlin assumes you have a buzzer with a fixed frequency. // -//#define SPEAKER +#define SPEAKER // // The duration and frequency for the UI feedback sound. @@ -2287,7 +2296,10 @@ // This is RAMPS-compatible using a single 10-pin connector. // (For CR-10 owners who want to replace the Melzi Creality board but retain the display) // -//#define CR10_STOCKDISPLAY +#define CR10_STOCKDISPLAY +#if ENABLED(CR10_STOCKDISPLAY) + #define RET6_12864_LCD // Specific to the SoC (can either be RET / VET) +#endif // // Ender-2 OEM display, a variant of the MKS_MINI_12864 diff --git a/config/examples/Creality/Ender-3/CrealityV427/Configuration_adv.h b/config/examples/Creality/Ender-3/CrealityV427/Configuration_adv.h index 5335fa012a..be3ca8d19b 100644 --- a/config/examples/Creality/Ender-3/CrealityV427/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/CrealityV427/Configuration_adv.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Creality/Ender-3/CrealityV427" + /** * Configuration_adv.h * @@ -741,7 +743,7 @@ //#define HOMING_BACKOFF_POST_MM { 2, 2, 2 } // (mm) Backoff from endstops after homing -//#define QUICK_HOME // If G28 contains XY do a diagonal move first +#define QUICK_HOME // If G28 contains XY do a diagonal move first //#define HOME_Y_BEFORE_X // If G28 contains XY home Y before X //#define HOME_Z_FIRST // Home Z first. Requires a Z-MIN endstop (not a probe). //#define CODEPENDENT_XY_HOMING // If X/Y can't home without homing Y/X first @@ -792,7 +794,7 @@ * differs, a mode set eeprom write will be completed at initialization. * Use the option below to force an eeprom write to a V3.1 probe regardless. */ - //#define BLTOUCH_SET_5V_MODE + #define BLTOUCH_SET_5V_MODE /** * Safety: Activate if connecting a probe with an unknown voltage mode. @@ -867,7 +869,7 @@ // On a 300mm bed a 5% grade would give a misalignment of ~1.5cm #define G34_MAX_GRADE 5 // (%) Maximum incline that G34 will handle - #define Z_STEPPER_ALIGN_ITERATIONS 5 // Number of iterations to apply during alignment + #define Z_STEPPER_ALIGN_ITERATIONS 3 // Number of iterations to apply during alignment #define Z_STEPPER_ALIGN_ACC 0.02 // Stop iterating early if the accuracy is better than this #define RESTORE_LEVELING_AFTER_G34 // Restore leveling after G34 is done? // After G34, re-home Z (G28 Z) or just calculate it from the last probe heights? @@ -1175,7 +1177,7 @@ #endif // Include a page of printer information in the LCD Main Menu - //#define LCD_INFO_MENU + #define LCD_INFO_MENU #if ENABLED(LCD_INFO_MENU) //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages #endif @@ -1229,7 +1231,7 @@ #endif // Scroll a longer status message into view - //#define STATUS_MESSAGE_SCROLLING + #define STATUS_MESSAGE_SCROLLING // On the Info Screen, display XY with one decimal place when possible //#define LCD_DECIMAL_SMALL_XY @@ -1384,7 +1386,7 @@ //#define LONG_FILENAME_HOST_SUPPORT // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES + #define SCROLL_LONG_FILENAMES // Leave the heaters on after Stop Print (not recommended!) //#define SD_ABORT_NO_COOLDOWN @@ -1790,7 +1792,7 @@ * * Warning: Does not respect endstops! */ -//#define BABYSTEPPING +#define BABYSTEPPING #if ENABLED(BABYSTEPPING) //#define INTEGRATED_BABYSTEPPING // EXPERIMENTAL integration of babystepping into the Stepper ISR //#define BABYSTEP_WITHOUT_HOMING @@ -1801,7 +1803,7 @@ #define BABYSTEP_MULTIPLICATOR_Z 1 // (steps or mm) Steps or millimeter distance for each Z babystep #define BABYSTEP_MULTIPLICATOR_XY 1 // (steps or mm) Steps or millimeter distance for each XY babystep - //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. + #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. // Note: Extra time may be added to mitigate controller latency. @@ -2493,7 +2495,7 @@ #define INTERPOLATE true #if AXIS_IS_TMC(X) - #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. + #define X_CURRENT 580 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for sensorless homing #define X_MICROSTEPS 16 // 0..256 #define X_RSENSE 0.11 @@ -2511,7 +2513,7 @@ #endif #if AXIS_IS_TMC(Y) - #define Y_CURRENT 800 + #define Y_CURRENT 580 #define Y_CURRENT_HOME Y_CURRENT #define Y_MICROSTEPS 16 #define Y_RSENSE 0.11 @@ -2529,7 +2531,7 @@ #endif #if AXIS_IS_TMC(Z) - #define Z_CURRENT 800 + #define Z_CURRENT 580 #define Z_CURRENT_HOME Z_CURRENT #define Z_MICROSTEPS 16 #define Z_RSENSE 0.11 @@ -2565,7 +2567,7 @@ #endif #if AXIS_IS_TMC(E0) - #define E0_CURRENT 800 + #define E0_CURRENT 650 #define E0_MICROSTEPS 16 #define E0_RSENSE 0.11 #define E0_CHAIN_POS -1 @@ -2719,7 +2721,7 @@ * Define your own with: * { , , hysteresis_start[1..8] } */ - #define CHOPPER_TIMING CHOPPER_DEFAULT_12V // All axes (override below) + #define CHOPPER_TIMING CHOPPER_DEFAULT_24V // All axes (override below) //#define CHOPPER_TIMING_X CHOPPER_TIMING // For X Axes (override below) //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X //#define CHOPPER_TIMING_Y CHOPPER_TIMING // For Y Axes (override below) diff --git a/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/BLTouch/Configuration.h b/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/BLTouch/Configuration.h index 78c2dc9160..3049da847b 100644 --- a/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/BLTouch/Configuration.h +++ b/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/BLTouch/Configuration.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Creality/Ender-3/FYSETC Cheetah 1.2/BLTouch" + /** * Configuration.h * @@ -102,7 +104,7 @@ * * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] */ -#define SERIAL_PORT 0 +#define SERIAL_PORT 1 // libmaple 0 for USB, 1 for serial /** * Select a secondary serial port on the board to use for communication with the host. @@ -127,14 +129,14 @@ * * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ -#define BAUDRATE 250000 +#define BAUDRATE 115200 // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH // Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_RAMPS_14_EFB + #define MOTHERBOARD BOARD_FYSETC_CHEETAH_V12 #endif // Name displayed in the LCD "Ready" message and Info menu @@ -424,7 +426,7 @@ #define TEMP_SENSOR_5 0 #define TEMP_SENSOR_6 0 #define TEMP_SENSOR_7 0 -#define TEMP_SENSOR_BED 0 +#define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 #define TEMP_SENSOR_COOLER 0 @@ -510,16 +512,17 @@ //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) // Set/get with gcode: M301 E[extruder number, 0-2] + // PID for Makerlab J-head #if ENABLED(PID_PARAMS_PER_HOTEND) // Specify between 1 and HOTENDS values per array. // If fewer than EXTRUDER values are provided, the last element will be repeated. - #define DEFAULT_Kp_LIST { 22.20, 22.20 } - #define DEFAULT_Ki_LIST { 1.08, 1.08 } - #define DEFAULT_Kd_LIST { 114.00, 114.00 } + #define DEFAULT_Kp_LIST { 21.73, 21.73 } + #define DEFAULT_Ki_LIST { 1.54, 1.54 } + #define DEFAULT_Kd_LIST { 76.55, 76.55 } #else - #define DEFAULT_Kp 22.20 - #define DEFAULT_Ki 1.08 - #define DEFAULT_Kd 114.00 + #define DEFAULT_Kp 21.73 + #define DEFAULT_Ki 1.54 + #define DEFAULT_Kd 76.55 #endif #endif // PIDTEMP @@ -743,15 +746,15 @@ * TMC5130, TMC5130_STANDALONE, TMC5160, TMC5160_STANDALONE * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'L6474', 'POWERSTEP01', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2160', 'TMC2160_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC2209', 'TMC2209_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE', 'TMC5160', 'TMC5160_STANDALONE'] */ -#define X_DRIVER_TYPE A4988 -#define Y_DRIVER_TYPE A4988 -#define Z_DRIVER_TYPE A4988 +#define X_DRIVER_TYPE TMC2208 +#define Y_DRIVER_TYPE TMC2208 +#define Z_DRIVER_TYPE TMC2208 //#define X2_DRIVER_TYPE A4988 //#define Y2_DRIVER_TYPE A4988 //#define Z2_DRIVER_TYPE A4988 //#define Z3_DRIVER_TYPE A4988 //#define Z4_DRIVER_TYPE A4988 -#define E0_DRIVER_TYPE A4988 +#define E0_DRIVER_TYPE TMC2208 //#define E1_DRIVER_TYPE A4988 //#define E2_DRIVER_TYPE A4988 //#define E3_DRIVER_TYPE A4988 @@ -806,14 +809,14 @@ * Override with M92 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 500 } +#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 93 } /** * Default Max Feed Rate (mm/s) * Override with M203 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 } +#define DEFAULT_MAX_FEEDRATE { 500, 500, 5, 25 } //#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 #if ENABLED(LIMITED_MAX_FR_EDITING) @@ -826,7 +829,7 @@ * Override with M201 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 } +#define DEFAULT_MAX_ACCELERATION { 500, 500, 100, 5000 } //#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 #if ENABLED(LIMITED_MAX_ACCEL_EDITING) @@ -841,9 +844,9 @@ * M204 R Retract Acceleration * M204 T Travel Acceleration */ -#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves +#define DEFAULT_ACCELERATION 500 // X, Y, Z and E acceleration for printing moves +#define DEFAULT_RETRACT_ACCELERATION 500 // E acceleration for retracts +#define DEFAULT_TRAVEL_ACCELERATION 500 // X, Y, Z acceleration for travel (non printing) moves /** * Default Jerk limits (mm/s) @@ -877,7 +880,7 @@ * https://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html */ #if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.013 // (mm) Distance from real junction edge + #define JUNCTION_DEVIATION_MM 0.08 // (mm) Distance from real junction edge #define JD_HANDLE_SMALL_SEGMENTS // Use curvature estimation instead of just the junction angle // for small segments (< 1mm) with large junction angles (> 135°). #endif @@ -963,7 +966,7 @@ /** * The BLTouch probe uses a Hall effect sensor and emulates a servo. */ -//#define BLTOUCH +#define BLTOUCH /** * Touch-MI Probe by hotends.fr @@ -1055,7 +1058,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +#define NOZZLE_TO_PROBE_OFFSET { -44, -6, -3.9 } // Most probes should stay away from the edges of the bed, but // with NOZZLE_AS_PROBE this can be negative for a wider probing area. @@ -1123,8 +1126,8 @@ * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. */ -#define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow -#define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points +#define Z_CLEARANCE_DEPLOY_PROBE 15 // Z Clearance for Deploy/Stow +#define Z_CLEARANCE_BETWEEN_PROBES 10 // Z Clearance between probe points #define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes //#define Z_AFTER_PROBING 5 // Z position after probing is done @@ -1190,14 +1193,14 @@ // @section machine // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR false +#define INVERT_X_DIR true #define INVERT_Y_DIR true #define INVERT_Z_DIR false // @section extruder // For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR false +#define INVERT_E0_DIR true #define INVERT_E1_DIR false #define INVERT_E2_DIR false #define INVERT_E3_DIR false @@ -1232,8 +1235,8 @@ // @section machine // The size of the printable area -#define X_BED_SIZE 200 -#define Y_BED_SIZE 200 +#define X_BED_SIZE 235 +#define Y_BED_SIZE 235 // Travel limits (mm) after homing, corresponding to endstop positions. #define X_MIN_POS 0 @@ -1241,7 +1244,7 @@ #define Z_MIN_POS 0 #define X_MAX_POS X_BED_SIZE #define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 200 +#define Z_MAX_POS 260 /** * Software Endstops @@ -1587,7 +1590,7 @@ // - Move the Z probe (or nozzle) to a defined XY point before Z Homing. // - Prevent Z homing when the Z probe is outside bed area. // -//#define Z_SAFE_HOMING +#define Z_SAFE_HOMING #if ENABLED(Z_SAFE_HOMING) #define Z_SAFE_HOMING_X_POINT X_CENTER // X point for Z homing @@ -1672,7 +1675,7 @@ * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) */ -//#define EEPROM_SETTINGS // Persistent storage with M500 and M501 +#define EEPROM_SETTINGS // Persistent storage with M500 and M501 //#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. #define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load @@ -1936,7 +1939,7 @@ * SD Card support is disabled by default. If your controller has an SD slot, * you must uncomment the following option or it won't work. */ -//#define SDSUPPORT +#define SDSUPPORT /** * SD CARD: ENABLE CRC @@ -2195,7 +2198,7 @@ // RepRapDiscount FULL GRAPHIC Smart Controller // https://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller // -//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER +#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER // // K.3D Full Graphic Smart Controller @@ -2618,7 +2621,7 @@ // Use software PWM to drive the fan, as for the heaters. This uses a very low frequency // which is not as annoying as with the hardware PWM. On the other hand, if this frequency // is too low, you should also increment SOFT_PWM_SCALE. -//#define FAN_SOFT_PWM +#define FAN_SOFT_PWM // Incrementing this by 1 will double the software PWM frequency, // affecting heaters, and the fan if FAN_SOFT_PWM is enabled. diff --git a/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/BLTouch/Configuration_adv.h b/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/BLTouch/Configuration_adv.h index 5335fa012a..344a2990f9 100644 --- a/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/BLTouch/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/BLTouch/Configuration_adv.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Creality/Ender-3/FYSETC Cheetah 1.2/BLTouch" + /** * Configuration_adv.h * @@ -258,7 +260,7 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 20 // Seconds + #define WATCH_TEMP_PERIOD 120 // Seconds #define WATCH_TEMP_INCREASE 2 // Degrees Celsius #endif @@ -266,13 +268,13 @@ * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_BED_PERIOD 60 // Seconds #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds + #define WATCH_BED_TEMP_PERIOD 100 // Seconds #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius #endif @@ -867,7 +869,7 @@ // On a 300mm bed a 5% grade would give a misalignment of ~1.5cm #define G34_MAX_GRADE 5 // (%) Maximum incline that G34 will handle - #define Z_STEPPER_ALIGN_ITERATIONS 5 // Number of iterations to apply during alignment + #define Z_STEPPER_ALIGN_ITERATIONS 3 // Number of iterations to apply during alignment #define Z_STEPPER_ALIGN_ACC 0.02 // Stop iterating early if the accuracy is better than this #define RESTORE_LEVELING_AFTER_G34 // Restore leveling after G34 is done? // After G34, re-home Z (G28 Z) or just calculate it from the last probe heights? @@ -1292,7 +1294,7 @@ // Reverse SD sort to show "more recent" files first, according to the card's FAT. // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended. - #define SDCARD_RATHERRECENTFIRST + //#define SDCARD_RATHERRECENTFIRST #define SD_MENU_CONFIRM_START // Confirm the selected SD file before printing @@ -1301,7 +1303,7 @@ //#define BROWSE_MEDIA_ON_INSERT // Open the file browser when media is inserted - #define EVENT_GCODE_SD_ABORT "G28XY" // G-code to run on SD Abort Print (e.g., "G28XY" or "G27") + #define EVENT_GCODE_SD_ABORT "M21" // G-code to run on SD Abort Print (e.g., "G28XY" or "G27") #if ENABLED(PRINTER_EVENT_LEDS) #define PE_LEDS_COMPLETED_TIME (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination @@ -1368,9 +1370,9 @@ #define SDSORT_LIMIT 40 // Maximum number of sorted items (10-256). Costs 27 bytes each. #define FOLDER_SORTING -1 // -1=above 0=none 1=below #define SDSORT_GCODE false // Allow turning sorting on/off with LCD and M34 G-code. - #define SDSORT_USES_RAM false // Pre-allocate a static array for faster pre-sorting. + #define SDSORT_USES_RAM true // Pre-allocate a static array for faster pre-sorting. #define SDSORT_USES_STACK false // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.) - #define SDSORT_CACHE_NAMES false // Keep sorted items in RAM longer for speedy performance. Most expensive option. + #define SDSORT_CACHE_NAMES true // Keep sorted items in RAM longer for speedy performance. Most expensive option. #define SDSORT_DYNAMIC_RAM false // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use! #define SDSORT_CACHE_VFATS 2 // Maximum number of 13-byte VFAT entries to use for sorting. // Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM. @@ -2493,7 +2495,7 @@ #define INTERPOLATE true #if AXIS_IS_TMC(X) - #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. + #define X_CURRENT 700 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for sensorless homing #define X_MICROSTEPS 16 // 0..256 #define X_RSENSE 0.11 @@ -2511,7 +2513,7 @@ #endif #if AXIS_IS_TMC(Y) - #define Y_CURRENT 800 + #define Y_CURRENT 500 #define Y_CURRENT_HOME Y_CURRENT #define Y_MICROSTEPS 16 #define Y_RSENSE 0.11 @@ -2565,7 +2567,7 @@ #endif #if AXIS_IS_TMC(E0) - #define E0_CURRENT 800 + #define E0_CURRENT 650 #define E0_MICROSTEPS 16 #define E0_RSENSE 0.11 #define E0_CHAIN_POS -1 @@ -2670,15 +2672,15 @@ * Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers * on the same serial port, either here or in your board's pins file. */ - //#define X_SLAVE_ADDRESS 0 - //#define Y_SLAVE_ADDRESS 0 - //#define Z_SLAVE_ADDRESS 0 + #define X_SLAVE_ADDRESS 0 + #define Y_SLAVE_ADDRESS 1 + #define Z_SLAVE_ADDRESS 2 //#define X2_SLAVE_ADDRESS 0 //#define Y2_SLAVE_ADDRESS 0 //#define Z2_SLAVE_ADDRESS 0 //#define Z3_SLAVE_ADDRESS 0 //#define Z4_SLAVE_ADDRESS 0 - //#define E0_SLAVE_ADDRESS 0 + #define E0_SLAVE_ADDRESS 3 //#define E1_SLAVE_ADDRESS 0 //#define E2_SLAVE_ADDRESS 0 //#define E3_SLAVE_ADDRESS 0 @@ -2719,7 +2721,7 @@ * Define your own with: * { , , hysteresis_start[1..8] } */ - #define CHOPPER_TIMING CHOPPER_DEFAULT_12V // All axes (override below) + #define CHOPPER_TIMING CHOPPER_DEFAULT_24V // All axes (override below) //#define CHOPPER_TIMING_X CHOPPER_TIMING // For X Axes (override below) //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X //#define CHOPPER_TIMING_Y CHOPPER_TIMING // For Y Axes (override below) @@ -2748,7 +2750,7 @@ * M912 - Clear stepper driver overtemperature pre-warn condition flag. * M122 - Report driver parameters (Requires TMC_DEBUG) */ - //#define MONITOR_DRIVER_STATUS + #define MONITOR_DRIVER_STATUS #if ENABLED(MONITOR_DRIVER_STATUS) #define CURRENT_STEP_DOWN 50 // [mA] diff --git a/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/base/Configuration.h b/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/base/Configuration.h index 78c2dc9160..42cc9a18d1 100644 --- a/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/base/Configuration.h +++ b/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/base/Configuration.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Creality/Ender-3/FYSETC Cheetah 1.2/base" + /** * Configuration.h * @@ -102,7 +104,7 @@ * * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] */ -#define SERIAL_PORT 0 +#define SERIAL_PORT 1 // libmaple 0 for USB, 1 for serial /** * Select a secondary serial port on the board to use for communication with the host. @@ -127,14 +129,14 @@ * * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ -#define BAUDRATE 250000 +#define BAUDRATE 115200 // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH // Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_RAMPS_14_EFB + #define MOTHERBOARD BOARD_FYSETC_CHEETAH_V12 #endif // Name displayed in the LCD "Ready" message and Info menu @@ -424,7 +426,7 @@ #define TEMP_SENSOR_5 0 #define TEMP_SENSOR_6 0 #define TEMP_SENSOR_7 0 -#define TEMP_SENSOR_BED 0 +#define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 #define TEMP_SENSOR_COOLER 0 @@ -510,16 +512,17 @@ //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) // Set/get with gcode: M301 E[extruder number, 0-2] + // PID for Makerlab J-head #if ENABLED(PID_PARAMS_PER_HOTEND) // Specify between 1 and HOTENDS values per array. // If fewer than EXTRUDER values are provided, the last element will be repeated. - #define DEFAULT_Kp_LIST { 22.20, 22.20 } - #define DEFAULT_Ki_LIST { 1.08, 1.08 } - #define DEFAULT_Kd_LIST { 114.00, 114.00 } + #define DEFAULT_Kp_LIST { 21.73, 21.73 } + #define DEFAULT_Ki_LIST { 1.54, 1.54 } + #define DEFAULT_Kd_LIST { 76.55, 76.55 } #else - #define DEFAULT_Kp 22.20 - #define DEFAULT_Ki 1.08 - #define DEFAULT_Kd 114.00 + #define DEFAULT_Kp 21.73 + #define DEFAULT_Ki 1.54 + #define DEFAULT_Kd 76.55 #endif #endif // PIDTEMP @@ -743,15 +746,15 @@ * TMC5130, TMC5130_STANDALONE, TMC5160, TMC5160_STANDALONE * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'L6474', 'POWERSTEP01', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2160', 'TMC2160_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC2209', 'TMC2209_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE', 'TMC5160', 'TMC5160_STANDALONE'] */ -#define X_DRIVER_TYPE A4988 -#define Y_DRIVER_TYPE A4988 -#define Z_DRIVER_TYPE A4988 +#define X_DRIVER_TYPE TMC2208 +#define Y_DRIVER_TYPE TMC2208 +#define Z_DRIVER_TYPE TMC2208 //#define X2_DRIVER_TYPE A4988 //#define Y2_DRIVER_TYPE A4988 //#define Z2_DRIVER_TYPE A4988 //#define Z3_DRIVER_TYPE A4988 //#define Z4_DRIVER_TYPE A4988 -#define E0_DRIVER_TYPE A4988 +#define E0_DRIVER_TYPE TMC2208 //#define E1_DRIVER_TYPE A4988 //#define E2_DRIVER_TYPE A4988 //#define E3_DRIVER_TYPE A4988 @@ -806,14 +809,14 @@ * Override with M92 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 500 } +#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 93 } /** * Default Max Feed Rate (mm/s) * Override with M203 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 } +#define DEFAULT_MAX_FEEDRATE { 500, 500, 5, 25 } //#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 #if ENABLED(LIMITED_MAX_FR_EDITING) @@ -826,7 +829,7 @@ * Override with M201 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 } +#define DEFAULT_MAX_ACCELERATION { 500, 500, 100, 5000 } //#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 #if ENABLED(LIMITED_MAX_ACCEL_EDITING) @@ -841,9 +844,9 @@ * M204 R Retract Acceleration * M204 T Travel Acceleration */ -#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves +#define DEFAULT_ACCELERATION 500 // X, Y, Z and E acceleration for printing moves +#define DEFAULT_RETRACT_ACCELERATION 500 // E acceleration for retracts +#define DEFAULT_TRAVEL_ACCELERATION 500 // X, Y, Z acceleration for travel (non printing) moves /** * Default Jerk limits (mm/s) @@ -877,7 +880,7 @@ * https://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html */ #if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.013 // (mm) Distance from real junction edge + #define JUNCTION_DEVIATION_MM 0.08 // (mm) Distance from real junction edge #define JD_HANDLE_SMALL_SEGMENTS // Use curvature estimation instead of just the junction angle // for small segments (< 1mm) with large junction angles (> 135°). #endif @@ -1190,14 +1193,14 @@ // @section machine // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR false +#define INVERT_X_DIR true #define INVERT_Y_DIR true #define INVERT_Z_DIR false // @section extruder // For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR false +#define INVERT_E0_DIR true #define INVERT_E1_DIR false #define INVERT_E2_DIR false #define INVERT_E3_DIR false @@ -1232,8 +1235,8 @@ // @section machine // The size of the printable area -#define X_BED_SIZE 200 -#define Y_BED_SIZE 200 +#define X_BED_SIZE 235 +#define Y_BED_SIZE 235 // Travel limits (mm) after homing, corresponding to endstop positions. #define X_MIN_POS 0 @@ -1241,7 +1244,7 @@ #define Z_MIN_POS 0 #define X_MAX_POS X_BED_SIZE #define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 200 +#define Z_MAX_POS 260 /** * Software Endstops @@ -1672,7 +1675,7 @@ * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) */ -//#define EEPROM_SETTINGS // Persistent storage with M500 and M501 +#define EEPROM_SETTINGS // Persistent storage with M500 and M501 //#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. #define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load @@ -1936,7 +1939,7 @@ * SD Card support is disabled by default. If your controller has an SD slot, * you must uncomment the following option or it won't work. */ -//#define SDSUPPORT +#define SDSUPPORT /** * SD CARD: ENABLE CRC @@ -2195,7 +2198,7 @@ // RepRapDiscount FULL GRAPHIC Smart Controller // https://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller // -//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER +#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER // // K.3D Full Graphic Smart Controller @@ -2618,7 +2621,7 @@ // Use software PWM to drive the fan, as for the heaters. This uses a very low frequency // which is not as annoying as with the hardware PWM. On the other hand, if this frequency // is too low, you should also increment SOFT_PWM_SCALE. -//#define FAN_SOFT_PWM +#define FAN_SOFT_PWM // Incrementing this by 1 will double the software PWM frequency, // affecting heaters, and the fan if FAN_SOFT_PWM is enabled. diff --git a/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/base/Configuration_adv.h b/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/base/Configuration_adv.h index 5335fa012a..fe267b3d94 100644 --- a/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/base/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/base/Configuration_adv.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Creality/Ender-3/FYSETC Cheetah 1.2/base" + /** * Configuration_adv.h * @@ -258,7 +260,7 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 20 // Seconds + #define WATCH_TEMP_PERIOD 120 // Seconds #define WATCH_TEMP_INCREASE 2 // Degrees Celsius #endif @@ -266,13 +268,13 @@ * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_BED_PERIOD 60 // Seconds #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds + #define WATCH_BED_TEMP_PERIOD 100 // Seconds #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius #endif @@ -867,7 +869,7 @@ // On a 300mm bed a 5% grade would give a misalignment of ~1.5cm #define G34_MAX_GRADE 5 // (%) Maximum incline that G34 will handle - #define Z_STEPPER_ALIGN_ITERATIONS 5 // Number of iterations to apply during alignment + #define Z_STEPPER_ALIGN_ITERATIONS 3 // Number of iterations to apply during alignment #define Z_STEPPER_ALIGN_ACC 0.02 // Stop iterating early if the accuracy is better than this #define RESTORE_LEVELING_AFTER_G34 // Restore leveling after G34 is done? // After G34, re-home Z (G28 Z) or just calculate it from the last probe heights? @@ -1292,7 +1294,7 @@ // Reverse SD sort to show "more recent" files first, according to the card's FAT. // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended. - #define SDCARD_RATHERRECENTFIRST + //#define SDCARD_RATHERRECENTFIRST #define SD_MENU_CONFIRM_START // Confirm the selected SD file before printing @@ -1301,7 +1303,7 @@ //#define BROWSE_MEDIA_ON_INSERT // Open the file browser when media is inserted - #define EVENT_GCODE_SD_ABORT "G28XY" // G-code to run on SD Abort Print (e.g., "G28XY" or "G27") + #define EVENT_GCODE_SD_ABORT "M21" // G-code to run on SD Abort Print (e.g., "G28XY" or "G27") #if ENABLED(PRINTER_EVENT_LEDS) #define PE_LEDS_COMPLETED_TIME (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination @@ -1368,9 +1370,9 @@ #define SDSORT_LIMIT 40 // Maximum number of sorted items (10-256). Costs 27 bytes each. #define FOLDER_SORTING -1 // -1=above 0=none 1=below #define SDSORT_GCODE false // Allow turning sorting on/off with LCD and M34 G-code. - #define SDSORT_USES_RAM false // Pre-allocate a static array for faster pre-sorting. + #define SDSORT_USES_RAM true // Pre-allocate a static array for faster pre-sorting. #define SDSORT_USES_STACK false // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.) - #define SDSORT_CACHE_NAMES false // Keep sorted items in RAM longer for speedy performance. Most expensive option. + #define SDSORT_CACHE_NAMES true // Keep sorted items in RAM longer for speedy performance. Most expensive option. #define SDSORT_DYNAMIC_RAM false // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use! #define SDSORT_CACHE_VFATS 2 // Maximum number of 13-byte VFAT entries to use for sorting. // Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM. @@ -2493,7 +2495,7 @@ #define INTERPOLATE true #if AXIS_IS_TMC(X) - #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. + #define X_CURRENT 700 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for sensorless homing #define X_MICROSTEPS 16 // 0..256 #define X_RSENSE 0.11 @@ -2511,7 +2513,7 @@ #endif #if AXIS_IS_TMC(Y) - #define Y_CURRENT 800 + #define Y_CURRENT 500 #define Y_CURRENT_HOME Y_CURRENT #define Y_MICROSTEPS 16 #define Y_RSENSE 0.11 @@ -2565,7 +2567,7 @@ #endif #if AXIS_IS_TMC(E0) - #define E0_CURRENT 800 + #define E0_CURRENT 650 #define E0_MICROSTEPS 16 #define E0_RSENSE 0.11 #define E0_CHAIN_POS -1 @@ -2670,15 +2672,15 @@ * Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers * on the same serial port, either here or in your board's pins file. */ - //#define X_SLAVE_ADDRESS 0 - //#define Y_SLAVE_ADDRESS 0 - //#define Z_SLAVE_ADDRESS 0 + #define X_SLAVE_ADDRESS 0 + #define Y_SLAVE_ADDRESS 1 + #define Z_SLAVE_ADDRESS 2 //#define X2_SLAVE_ADDRESS 0 //#define Y2_SLAVE_ADDRESS 0 //#define Z2_SLAVE_ADDRESS 0 //#define Z3_SLAVE_ADDRESS 0 //#define Z4_SLAVE_ADDRESS 0 - //#define E0_SLAVE_ADDRESS 0 + #define E0_SLAVE_ADDRESS 3 //#define E1_SLAVE_ADDRESS 0 //#define E2_SLAVE_ADDRESS 0 //#define E3_SLAVE_ADDRESS 0 @@ -2719,7 +2721,7 @@ * Define your own with: * { , , hysteresis_start[1..8] } */ - #define CHOPPER_TIMING CHOPPER_DEFAULT_12V // All axes (override below) + #define CHOPPER_TIMING CHOPPER_DEFAULT_24V // All axes (override below) //#define CHOPPER_TIMING_X CHOPPER_TIMING // For X Axes (override below) //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X //#define CHOPPER_TIMING_Y CHOPPER_TIMING // For Y Axes (override below) @@ -2748,7 +2750,7 @@ * M912 - Clear stepper driver overtemperature pre-warn condition flag. * M122 - Report driver parameters (Requires TMC_DEBUG) */ - //#define MONITOR_DRIVER_STATUS + #define MONITOR_DRIVER_STATUS #if ENABLED(MONITOR_DRIVER_STATUS) #define CURRENT_STEP_DOWN 50 // [mA] diff --git a/config/examples/Creality/Ender-3/FYSETC Cheetah/BLTouch/Configuration.h b/config/examples/Creality/Ender-3/FYSETC Cheetah/BLTouch/Configuration.h index 78c2dc9160..aea5516ac9 100644 --- a/config/examples/Creality/Ender-3/FYSETC Cheetah/BLTouch/Configuration.h +++ b/config/examples/Creality/Ender-3/FYSETC Cheetah/BLTouch/Configuration.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Creality/Ender-3/FYSETC Cheetah/BLTouch" + /** * Configuration.h * @@ -102,7 +104,7 @@ * * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] */ -#define SERIAL_PORT 0 +#define SERIAL_PORT 1 // libmaple 0 for USB, 1 for serial /** * Select a secondary serial port on the board to use for communication with the host. @@ -127,14 +129,14 @@ * * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ -#define BAUDRATE 250000 +#define BAUDRATE 115200 // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH // Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_RAMPS_14_EFB + #define MOTHERBOARD BOARD_FYSETC_CHEETAH #endif // Name displayed in the LCD "Ready" message and Info menu @@ -424,7 +426,7 @@ #define TEMP_SENSOR_5 0 #define TEMP_SENSOR_6 0 #define TEMP_SENSOR_7 0 -#define TEMP_SENSOR_BED 0 +#define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 #define TEMP_SENSOR_COOLER 0 @@ -510,16 +512,17 @@ //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) // Set/get with gcode: M301 E[extruder number, 0-2] + // PID for Makerlab J-head #if ENABLED(PID_PARAMS_PER_HOTEND) // Specify between 1 and HOTENDS values per array. // If fewer than EXTRUDER values are provided, the last element will be repeated. - #define DEFAULT_Kp_LIST { 22.20, 22.20 } - #define DEFAULT_Ki_LIST { 1.08, 1.08 } - #define DEFAULT_Kd_LIST { 114.00, 114.00 } + #define DEFAULT_Kp_LIST { 21.73, 21.73 } + #define DEFAULT_Ki_LIST { 1.54, 1.54 } + #define DEFAULT_Kd_LIST { 76.55, 76.55 } #else - #define DEFAULT_Kp 22.20 - #define DEFAULT_Ki 1.08 - #define DEFAULT_Kd 114.00 + #define DEFAULT_Kp 21.73 + #define DEFAULT_Ki 1.54 + #define DEFAULT_Kd 76.55 #endif #endif // PIDTEMP @@ -743,15 +746,15 @@ * TMC5130, TMC5130_STANDALONE, TMC5160, TMC5160_STANDALONE * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'L6474', 'POWERSTEP01', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2160', 'TMC2160_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC2209', 'TMC2209_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE', 'TMC5160', 'TMC5160_STANDALONE'] */ -#define X_DRIVER_TYPE A4988 -#define Y_DRIVER_TYPE A4988 -#define Z_DRIVER_TYPE A4988 +#define X_DRIVER_TYPE TMC2209 +#define Y_DRIVER_TYPE TMC2209 +#define Z_DRIVER_TYPE TMC2209 //#define X2_DRIVER_TYPE A4988 //#define Y2_DRIVER_TYPE A4988 //#define Z2_DRIVER_TYPE A4988 //#define Z3_DRIVER_TYPE A4988 //#define Z4_DRIVER_TYPE A4988 -#define E0_DRIVER_TYPE A4988 +#define E0_DRIVER_TYPE TMC2209 //#define E1_DRIVER_TYPE A4988 //#define E2_DRIVER_TYPE A4988 //#define E3_DRIVER_TYPE A4988 @@ -806,14 +809,14 @@ * Override with M92 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 500 } +#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 93 } /** * Default Max Feed Rate (mm/s) * Override with M203 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 } +#define DEFAULT_MAX_FEEDRATE { 500, 500, 5, 25 } //#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 #if ENABLED(LIMITED_MAX_FR_EDITING) @@ -826,7 +829,7 @@ * Override with M201 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 } +#define DEFAULT_MAX_ACCELERATION { 500, 500, 100, 5000 } //#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 #if ENABLED(LIMITED_MAX_ACCEL_EDITING) @@ -841,9 +844,9 @@ * M204 R Retract Acceleration * M204 T Travel Acceleration */ -#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves +#define DEFAULT_ACCELERATION 500 // X, Y, Z and E acceleration for printing moves +#define DEFAULT_RETRACT_ACCELERATION 500 // E acceleration for retracts +#define DEFAULT_TRAVEL_ACCELERATION 500 // X, Y, Z acceleration for travel (non printing) moves /** * Default Jerk limits (mm/s) @@ -877,7 +880,7 @@ * https://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html */ #if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.013 // (mm) Distance from real junction edge + #define JUNCTION_DEVIATION_MM 0.08 // (mm) Distance from real junction edge #define JD_HANDLE_SMALL_SEGMENTS // Use curvature estimation instead of just the junction angle // for small segments (< 1mm) with large junction angles (> 135°). #endif @@ -963,7 +966,7 @@ /** * The BLTouch probe uses a Hall effect sensor and emulates a servo. */ -//#define BLTOUCH +#define BLTOUCH /** * Touch-MI Probe by hotends.fr @@ -1055,7 +1058,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +#define NOZZLE_TO_PROBE_OFFSET { -44, -6, -3.9 } // Most probes should stay away from the edges of the bed, but // with NOZZLE_AS_PROBE this can be negative for a wider probing area. @@ -1123,8 +1126,8 @@ * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. */ -#define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow -#define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points +#define Z_CLEARANCE_DEPLOY_PROBE 15 // Z Clearance for Deploy/Stow +#define Z_CLEARANCE_BETWEEN_PROBES 10 // Z Clearance between probe points #define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes //#define Z_AFTER_PROBING 5 // Z position after probing is done @@ -1190,14 +1193,14 @@ // @section machine // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR false +#define INVERT_X_DIR true #define INVERT_Y_DIR true #define INVERT_Z_DIR false // @section extruder // For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR false +#define INVERT_E0_DIR true #define INVERT_E1_DIR false #define INVERT_E2_DIR false #define INVERT_E3_DIR false @@ -1232,8 +1235,8 @@ // @section machine // The size of the printable area -#define X_BED_SIZE 200 -#define Y_BED_SIZE 200 +#define X_BED_SIZE 235 +#define Y_BED_SIZE 235 // Travel limits (mm) after homing, corresponding to endstop positions. #define X_MIN_POS 0 @@ -1241,7 +1244,7 @@ #define Z_MIN_POS 0 #define X_MAX_POS X_BED_SIZE #define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 200 +#define Z_MAX_POS 260 /** * Software Endstops @@ -1587,7 +1590,7 @@ // - Move the Z probe (or nozzle) to a defined XY point before Z Homing. // - Prevent Z homing when the Z probe is outside bed area. // -//#define Z_SAFE_HOMING +#define Z_SAFE_HOMING #if ENABLED(Z_SAFE_HOMING) #define Z_SAFE_HOMING_X_POINT X_CENTER // X point for Z homing @@ -1672,7 +1675,7 @@ * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) */ -//#define EEPROM_SETTINGS // Persistent storage with M500 and M501 +#define EEPROM_SETTINGS // Persistent storage with M500 and M501 //#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. #define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load @@ -1936,7 +1939,7 @@ * SD Card support is disabled by default. If your controller has an SD slot, * you must uncomment the following option or it won't work. */ -//#define SDSUPPORT +#define SDSUPPORT /** * SD CARD: ENABLE CRC @@ -2195,7 +2198,7 @@ // RepRapDiscount FULL GRAPHIC Smart Controller // https://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller // -//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER +#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER // // K.3D Full Graphic Smart Controller @@ -2618,7 +2621,7 @@ // Use software PWM to drive the fan, as for the heaters. This uses a very low frequency // which is not as annoying as with the hardware PWM. On the other hand, if this frequency // is too low, you should also increment SOFT_PWM_SCALE. -//#define FAN_SOFT_PWM +#define FAN_SOFT_PWM // Incrementing this by 1 will double the software PWM frequency, // affecting heaters, and the fan if FAN_SOFT_PWM is enabled. @@ -2671,7 +2674,7 @@ * * LED Type. Enable only one of the following two options. */ -//#define RGB_LED +#define RGB_LED //#define RGBW_LED #if EITHER(RGB_LED, RGBW_LED) diff --git a/config/examples/Creality/Ender-3/FYSETC Cheetah/BLTouch/Configuration_adv.h b/config/examples/Creality/Ender-3/FYSETC Cheetah/BLTouch/Configuration_adv.h index 5335fa012a..330d4d8787 100644 --- a/config/examples/Creality/Ender-3/FYSETC Cheetah/BLTouch/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/FYSETC Cheetah/BLTouch/Configuration_adv.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Creality/Ender-3/FYSETC Cheetah/BLTouch" + /** * Configuration_adv.h * @@ -258,7 +260,7 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 20 // Seconds + #define WATCH_TEMP_PERIOD 120 // Seconds #define WATCH_TEMP_INCREASE 2 // Degrees Celsius #endif @@ -266,13 +268,13 @@ * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_BED_PERIOD 60 // Seconds #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds + #define WATCH_BED_TEMP_PERIOD 100 // Seconds #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius #endif @@ -867,7 +869,7 @@ // On a 300mm bed a 5% grade would give a misalignment of ~1.5cm #define G34_MAX_GRADE 5 // (%) Maximum incline that G34 will handle - #define Z_STEPPER_ALIGN_ITERATIONS 5 // Number of iterations to apply during alignment + #define Z_STEPPER_ALIGN_ITERATIONS 3 // Number of iterations to apply during alignment #define Z_STEPPER_ALIGN_ACC 0.02 // Stop iterating early if the accuracy is better than this #define RESTORE_LEVELING_AFTER_G34 // Restore leveling after G34 is done? // After G34, re-home Z (G28 Z) or just calculate it from the last probe heights? @@ -1292,7 +1294,7 @@ // Reverse SD sort to show "more recent" files first, according to the card's FAT. // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended. - #define SDCARD_RATHERRECENTFIRST + //#define SDCARD_RATHERRECENTFIRST #define SD_MENU_CONFIRM_START // Confirm the selected SD file before printing @@ -1301,7 +1303,7 @@ //#define BROWSE_MEDIA_ON_INSERT // Open the file browser when media is inserted - #define EVENT_GCODE_SD_ABORT "G28XY" // G-code to run on SD Abort Print (e.g., "G28XY" or "G27") + #define EVENT_GCODE_SD_ABORT "M21" // G-code to run on SD Abort Print (e.g., "G28XY" or "G27") #if ENABLED(PRINTER_EVENT_LEDS) #define PE_LEDS_COMPLETED_TIME (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination @@ -1368,9 +1370,9 @@ #define SDSORT_LIMIT 40 // Maximum number of sorted items (10-256). Costs 27 bytes each. #define FOLDER_SORTING -1 // -1=above 0=none 1=below #define SDSORT_GCODE false // Allow turning sorting on/off with LCD and M34 G-code. - #define SDSORT_USES_RAM false // Pre-allocate a static array for faster pre-sorting. + #define SDSORT_USES_RAM true // Pre-allocate a static array for faster pre-sorting. #define SDSORT_USES_STACK false // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.) - #define SDSORT_CACHE_NAMES false // Keep sorted items in RAM longer for speedy performance. Most expensive option. + #define SDSORT_CACHE_NAMES true // Keep sorted items in RAM longer for speedy performance. Most expensive option. #define SDSORT_DYNAMIC_RAM false // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use! #define SDSORT_CACHE_VFATS 2 // Maximum number of 13-byte VFAT entries to use for sorting. // Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM. @@ -2493,7 +2495,7 @@ #define INTERPOLATE true #if AXIS_IS_TMC(X) - #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. + #define X_CURRENT 700 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for sensorless homing #define X_MICROSTEPS 16 // 0..256 #define X_RSENSE 0.11 @@ -2511,7 +2513,7 @@ #endif #if AXIS_IS_TMC(Y) - #define Y_CURRENT 800 + #define Y_CURRENT 500 #define Y_CURRENT_HOME Y_CURRENT #define Y_MICROSTEPS 16 #define Y_RSENSE 0.11 @@ -2565,7 +2567,7 @@ #endif #if AXIS_IS_TMC(E0) - #define E0_CURRENT 800 + #define E0_CURRENT 650 #define E0_MICROSTEPS 16 #define E0_RSENSE 0.11 #define E0_CHAIN_POS -1 @@ -2670,15 +2672,15 @@ * Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers * on the same serial port, either here or in your board's pins file. */ - //#define X_SLAVE_ADDRESS 0 - //#define Y_SLAVE_ADDRESS 0 - //#define Z_SLAVE_ADDRESS 0 + #define X_SLAVE_ADDRESS 0 + #define Y_SLAVE_ADDRESS 1 + #define Z_SLAVE_ADDRESS 2 //#define X2_SLAVE_ADDRESS 0 //#define Y2_SLAVE_ADDRESS 0 //#define Z2_SLAVE_ADDRESS 0 //#define Z3_SLAVE_ADDRESS 0 //#define Z4_SLAVE_ADDRESS 0 - //#define E0_SLAVE_ADDRESS 0 + #define E0_SLAVE_ADDRESS 3 //#define E1_SLAVE_ADDRESS 0 //#define E2_SLAVE_ADDRESS 0 //#define E3_SLAVE_ADDRESS 0 @@ -2719,7 +2721,7 @@ * Define your own with: * { , , hysteresis_start[1..8] } */ - #define CHOPPER_TIMING CHOPPER_DEFAULT_12V // All axes (override below) + #define CHOPPER_TIMING CHOPPER_DEFAULT_24V // All axes (override below) //#define CHOPPER_TIMING_X CHOPPER_TIMING // For X Axes (override below) //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X //#define CHOPPER_TIMING_Y CHOPPER_TIMING // For Y Axes (override below) @@ -2748,7 +2750,7 @@ * M912 - Clear stepper driver overtemperature pre-warn condition flag. * M122 - Report driver parameters (Requires TMC_DEBUG) */ - //#define MONITOR_DRIVER_STATUS + #define MONITOR_DRIVER_STATUS #if ENABLED(MONITOR_DRIVER_STATUS) #define CURRENT_STEP_DOWN 50 // [mA] diff --git a/config/examples/Creality/Ender-3/FYSETC Cheetah/base/Configuration.h b/config/examples/Creality/Ender-3/FYSETC Cheetah/base/Configuration.h index 78c2dc9160..cf0bad6045 100644 --- a/config/examples/Creality/Ender-3/FYSETC Cheetah/base/Configuration.h +++ b/config/examples/Creality/Ender-3/FYSETC Cheetah/base/Configuration.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Creality/Ender-3/FYSETC Cheetah/base" + /** * Configuration.h * @@ -102,7 +104,7 @@ * * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] */ -#define SERIAL_PORT 0 +#define SERIAL_PORT 1 // libmaple 0 for USB, 1 for serial /** * Select a secondary serial port on the board to use for communication with the host. @@ -127,14 +129,14 @@ * * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ -#define BAUDRATE 250000 +#define BAUDRATE 115200 // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH // Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_RAMPS_14_EFB + #define MOTHERBOARD BOARD_FYSETC_CHEETAH #endif // Name displayed in the LCD "Ready" message and Info menu @@ -424,7 +426,7 @@ #define TEMP_SENSOR_5 0 #define TEMP_SENSOR_6 0 #define TEMP_SENSOR_7 0 -#define TEMP_SENSOR_BED 0 +#define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 #define TEMP_SENSOR_COOLER 0 @@ -510,16 +512,17 @@ //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) // Set/get with gcode: M301 E[extruder number, 0-2] + // PID for Makerlab J-head #if ENABLED(PID_PARAMS_PER_HOTEND) // Specify between 1 and HOTENDS values per array. // If fewer than EXTRUDER values are provided, the last element will be repeated. - #define DEFAULT_Kp_LIST { 22.20, 22.20 } - #define DEFAULT_Ki_LIST { 1.08, 1.08 } - #define DEFAULT_Kd_LIST { 114.00, 114.00 } + #define DEFAULT_Kp_LIST { 21.73, 21.73 } + #define DEFAULT_Ki_LIST { 1.54, 1.54 } + #define DEFAULT_Kd_LIST { 76.55, 76.55 } #else - #define DEFAULT_Kp 22.20 - #define DEFAULT_Ki 1.08 - #define DEFAULT_Kd 114.00 + #define DEFAULT_Kp 21.73 + #define DEFAULT_Ki 1.54 + #define DEFAULT_Kd 76.55 #endif #endif // PIDTEMP @@ -743,15 +746,15 @@ * TMC5130, TMC5130_STANDALONE, TMC5160, TMC5160_STANDALONE * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'L6474', 'POWERSTEP01', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2160', 'TMC2160_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC2209', 'TMC2209_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE', 'TMC5160', 'TMC5160_STANDALONE'] */ -#define X_DRIVER_TYPE A4988 -#define Y_DRIVER_TYPE A4988 -#define Z_DRIVER_TYPE A4988 +#define X_DRIVER_TYPE TMC2209 +#define Y_DRIVER_TYPE TMC2209 +#define Z_DRIVER_TYPE TMC2209 //#define X2_DRIVER_TYPE A4988 //#define Y2_DRIVER_TYPE A4988 //#define Z2_DRIVER_TYPE A4988 //#define Z3_DRIVER_TYPE A4988 //#define Z4_DRIVER_TYPE A4988 -#define E0_DRIVER_TYPE A4988 +#define E0_DRIVER_TYPE TMC2209 //#define E1_DRIVER_TYPE A4988 //#define E2_DRIVER_TYPE A4988 //#define E3_DRIVER_TYPE A4988 @@ -806,14 +809,14 @@ * Override with M92 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 500 } +#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 93 } /** * Default Max Feed Rate (mm/s) * Override with M203 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 } +#define DEFAULT_MAX_FEEDRATE { 500, 500, 5, 25 } //#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 #if ENABLED(LIMITED_MAX_FR_EDITING) @@ -826,7 +829,7 @@ * Override with M201 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 } +#define DEFAULT_MAX_ACCELERATION { 500, 500, 100, 5000 } //#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 #if ENABLED(LIMITED_MAX_ACCEL_EDITING) @@ -841,9 +844,9 @@ * M204 R Retract Acceleration * M204 T Travel Acceleration */ -#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves +#define DEFAULT_ACCELERATION 500 // X, Y, Z and E acceleration for printing moves +#define DEFAULT_RETRACT_ACCELERATION 500 // E acceleration for retracts +#define DEFAULT_TRAVEL_ACCELERATION 500 // X, Y, Z acceleration for travel (non printing) moves /** * Default Jerk limits (mm/s) @@ -877,7 +880,7 @@ * https://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html */ #if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.013 // (mm) Distance from real junction edge + #define JUNCTION_DEVIATION_MM 0.08 // (mm) Distance from real junction edge #define JD_HANDLE_SMALL_SEGMENTS // Use curvature estimation instead of just the junction angle // for small segments (< 1mm) with large junction angles (> 135°). #endif @@ -1190,14 +1193,14 @@ // @section machine // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR false +#define INVERT_X_DIR true #define INVERT_Y_DIR true #define INVERT_Z_DIR false // @section extruder // For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR false +#define INVERT_E0_DIR true #define INVERT_E1_DIR false #define INVERT_E2_DIR false #define INVERT_E3_DIR false @@ -1232,8 +1235,8 @@ // @section machine // The size of the printable area -#define X_BED_SIZE 200 -#define Y_BED_SIZE 200 +#define X_BED_SIZE 235 +#define Y_BED_SIZE 235 // Travel limits (mm) after homing, corresponding to endstop positions. #define X_MIN_POS 0 @@ -1241,7 +1244,7 @@ #define Z_MIN_POS 0 #define X_MAX_POS X_BED_SIZE #define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 200 +#define Z_MAX_POS 260 /** * Software Endstops @@ -1672,7 +1675,7 @@ * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) */ -//#define EEPROM_SETTINGS // Persistent storage with M500 and M501 +#define EEPROM_SETTINGS // Persistent storage with M500 and M501 //#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. #define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load @@ -1936,7 +1939,7 @@ * SD Card support is disabled by default. If your controller has an SD slot, * you must uncomment the following option or it won't work. */ -//#define SDSUPPORT +#define SDSUPPORT /** * SD CARD: ENABLE CRC @@ -2195,7 +2198,7 @@ // RepRapDiscount FULL GRAPHIC Smart Controller // https://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller // -//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER +#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER // // K.3D Full Graphic Smart Controller @@ -2618,7 +2621,7 @@ // Use software PWM to drive the fan, as for the heaters. This uses a very low frequency // which is not as annoying as with the hardware PWM. On the other hand, if this frequency // is too low, you should also increment SOFT_PWM_SCALE. -//#define FAN_SOFT_PWM +#define FAN_SOFT_PWM // Incrementing this by 1 will double the software PWM frequency, // affecting heaters, and the fan if FAN_SOFT_PWM is enabled. @@ -2671,7 +2674,7 @@ * * LED Type. Enable only one of the following two options. */ -//#define RGB_LED +#define RGB_LED //#define RGBW_LED #if EITHER(RGB_LED, RGBW_LED) diff --git a/config/examples/Creality/Ender-3/FYSETC Cheetah/base/Configuration_adv.h b/config/examples/Creality/Ender-3/FYSETC Cheetah/base/Configuration_adv.h index 5335fa012a..2f29ce3412 100644 --- a/config/examples/Creality/Ender-3/FYSETC Cheetah/base/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/FYSETC Cheetah/base/Configuration_adv.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Creality/Ender-3/FYSETC Cheetah/base" + /** * Configuration_adv.h * @@ -258,7 +260,7 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 20 // Seconds + #define WATCH_TEMP_PERIOD 120 // Seconds #define WATCH_TEMP_INCREASE 2 // Degrees Celsius #endif @@ -266,13 +268,13 @@ * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_BED_PERIOD 60 // Seconds #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds + #define WATCH_BED_TEMP_PERIOD 100 // Seconds #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius #endif @@ -867,7 +869,7 @@ // On a 300mm bed a 5% grade would give a misalignment of ~1.5cm #define G34_MAX_GRADE 5 // (%) Maximum incline that G34 will handle - #define Z_STEPPER_ALIGN_ITERATIONS 5 // Number of iterations to apply during alignment + #define Z_STEPPER_ALIGN_ITERATIONS 3 // Number of iterations to apply during alignment #define Z_STEPPER_ALIGN_ACC 0.02 // Stop iterating early if the accuracy is better than this #define RESTORE_LEVELING_AFTER_G34 // Restore leveling after G34 is done? // After G34, re-home Z (G28 Z) or just calculate it from the last probe heights? @@ -1292,7 +1294,7 @@ // Reverse SD sort to show "more recent" files first, according to the card's FAT. // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended. - #define SDCARD_RATHERRECENTFIRST + //#define SDCARD_RATHERRECENTFIRST #define SD_MENU_CONFIRM_START // Confirm the selected SD file before printing @@ -1301,7 +1303,7 @@ //#define BROWSE_MEDIA_ON_INSERT // Open the file browser when media is inserted - #define EVENT_GCODE_SD_ABORT "G28XY" // G-code to run on SD Abort Print (e.g., "G28XY" or "G27") + #define EVENT_GCODE_SD_ABORT "M21" // G-code to run on SD Abort Print (e.g., "G28XY" or "G27") #if ENABLED(PRINTER_EVENT_LEDS) #define PE_LEDS_COMPLETED_TIME (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination @@ -1368,9 +1370,9 @@ #define SDSORT_LIMIT 40 // Maximum number of sorted items (10-256). Costs 27 bytes each. #define FOLDER_SORTING -1 // -1=above 0=none 1=below #define SDSORT_GCODE false // Allow turning sorting on/off with LCD and M34 G-code. - #define SDSORT_USES_RAM false // Pre-allocate a static array for faster pre-sorting. + #define SDSORT_USES_RAM true // Pre-allocate a static array for faster pre-sorting. #define SDSORT_USES_STACK false // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.) - #define SDSORT_CACHE_NAMES false // Keep sorted items in RAM longer for speedy performance. Most expensive option. + #define SDSORT_CACHE_NAMES true // Keep sorted items in RAM longer for speedy performance. Most expensive option. #define SDSORT_DYNAMIC_RAM false // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use! #define SDSORT_CACHE_VFATS 2 // Maximum number of 13-byte VFAT entries to use for sorting. // Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM. @@ -2493,7 +2495,7 @@ #define INTERPOLATE true #if AXIS_IS_TMC(X) - #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. + #define X_CURRENT 700 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for sensorless homing #define X_MICROSTEPS 16 // 0..256 #define X_RSENSE 0.11 @@ -2511,7 +2513,7 @@ #endif #if AXIS_IS_TMC(Y) - #define Y_CURRENT 800 + #define Y_CURRENT 500 #define Y_CURRENT_HOME Y_CURRENT #define Y_MICROSTEPS 16 #define Y_RSENSE 0.11 @@ -2565,7 +2567,7 @@ #endif #if AXIS_IS_TMC(E0) - #define E0_CURRENT 800 + #define E0_CURRENT 650 #define E0_MICROSTEPS 16 #define E0_RSENSE 0.11 #define E0_CHAIN_POS -1 @@ -2670,15 +2672,15 @@ * Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers * on the same serial port, either here or in your board's pins file. */ - //#define X_SLAVE_ADDRESS 0 - //#define Y_SLAVE_ADDRESS 0 - //#define Z_SLAVE_ADDRESS 0 + #define X_SLAVE_ADDRESS 0 + #define Y_SLAVE_ADDRESS 1 + #define Z_SLAVE_ADDRESS 2 //#define X2_SLAVE_ADDRESS 0 //#define Y2_SLAVE_ADDRESS 0 //#define Z2_SLAVE_ADDRESS 0 //#define Z3_SLAVE_ADDRESS 0 //#define Z4_SLAVE_ADDRESS 0 - //#define E0_SLAVE_ADDRESS 0 + #define E0_SLAVE_ADDRESS 3 //#define E1_SLAVE_ADDRESS 0 //#define E2_SLAVE_ADDRESS 0 //#define E3_SLAVE_ADDRESS 0 @@ -2719,7 +2721,7 @@ * Define your own with: * { , , hysteresis_start[1..8] } */ - #define CHOPPER_TIMING CHOPPER_DEFAULT_12V // All axes (override below) + #define CHOPPER_TIMING CHOPPER_DEFAULT_24V // All axes (override below) //#define CHOPPER_TIMING_X CHOPPER_TIMING // For X Axes (override below) //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X //#define CHOPPER_TIMING_Y CHOPPER_TIMING // For Y Axes (override below) @@ -2748,7 +2750,7 @@ * M912 - Clear stepper driver overtemperature pre-warn condition flag. * M122 - Report driver parameters (Requires TMC_DEBUG) */ - //#define MONITOR_DRIVER_STATUS + #define MONITOR_DRIVER_STATUS #if ENABLED(MONITOR_DRIVER_STATUS) #define CURRENT_STEP_DOWN 50 // [mA] diff --git a/config/examples/Creality/Ender-3/MEEB-3DP/Configuration.h b/config/examples/Creality/Ender-3/MEEB-3DP/Configuration.h index 78c2dc9160..496141c6a5 100644 --- a/config/examples/Creality/Ender-3/MEEB-3DP/Configuration.h +++ b/config/examples/Creality/Ender-3/MEEB-3DP/Configuration.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Creality/Ender-3/MEEB-3DP" + /** * Configuration.h * @@ -69,7 +71,7 @@ // @section info // Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes. +#define STRING_CONFIG_H_AUTHOR "(ccrobot-online, MEEB_3DP)" // Who made the changes. //#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) /** @@ -87,10 +89,10 @@ #define SHOW_BOOTSCREEN // Show the bitmap in Marlin/_Bootscreen.h on startup. -//#define SHOW_CUSTOM_BOOTSCREEN +#define SHOW_CUSTOM_BOOTSCREEN // Show the bitmap in Marlin/_Statusscreen.h on the status screen. -//#define CUSTOM_STATUS_SCREEN_IMAGE +#define CUSTOM_STATUS_SCREEN_IMAGE // @section machine @@ -102,14 +104,14 @@ * * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] */ -#define SERIAL_PORT 0 +#define SERIAL_PORT -1 /** * Select a secondary serial port on the board to use for communication with the host. * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] */ -//#define SERIAL_PORT_2 -1 +#define SERIAL_PORT_2 1 /** * Select a third serial port on the board to use for communication with the host. @@ -127,22 +129,22 @@ * * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ -#define BAUDRATE 250000 +#define BAUDRATE 115200 // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH // Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_RAMPS_14_EFB + #define MOTHERBOARD BOARD_CCROBOT_MEEB_3DP #endif // Name displayed in the LCD "Ready" message and Info menu -//#define CUSTOM_MACHINE_NAME "3D Printer" +#define CUSTOM_MACHINE_NAME "Ender-3" // Printer's unique ID, used by some programs to differentiate between machines. // Choose your own or use a service like https://www.uuidgenerator.net/version4 -//#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" +#define MACHINE_UUID "21d7a8c6-d587-4189-9e5c-414d6990b363" // @section extruder @@ -424,7 +426,7 @@ #define TEMP_SENSOR_5 0 #define TEMP_SENSOR_6 0 #define TEMP_SENSOR_7 0 -#define TEMP_SENSOR_BED 0 +#define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 #define TEMP_SENSOR_COOLER 0 @@ -480,7 +482,7 @@ #define HEATER_5_MAXTEMP 275 #define HEATER_6_MAXTEMP 275 #define HEATER_7_MAXTEMP 275 -#define BED_MAXTEMP 150 +#define BED_MAXTEMP 125 #define CHAMBER_MAXTEMP 60 /** @@ -505,21 +507,21 @@ #define PID_K1 0.95 // Smoothing factor within any PID loop #if ENABLED(PIDTEMP) - //#define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) - //#define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) + #define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) + #define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) // Set/get with gcode: M301 E[extruder number, 0-2] #if ENABLED(PID_PARAMS_PER_HOTEND) // Specify between 1 and HOTENDS values per array. // If fewer than EXTRUDER values are provided, the last element will be repeated. - #define DEFAULT_Kp_LIST { 22.20, 22.20 } - #define DEFAULT_Ki_LIST { 1.08, 1.08 } - #define DEFAULT_Kd_LIST { 114.00, 114.00 } + #define DEFAULT_Kp_LIST { 25.20, 25.20 } + #define DEFAULT_Ki_LIST { 2.11, 2.11 } + #define DEFAULT_Kd_LIST { 75.35, 75.35 } #else - #define DEFAULT_Kp 22.20 - #define DEFAULT_Ki 1.08 - #define DEFAULT_Kd 114.00 + #define DEFAULT_Kp 25.20 + #define DEFAULT_Ki 2.11 + #define DEFAULT_Kd 75.35 #endif #endif // PIDTEMP @@ -540,7 +542,7 @@ * heater. If your configuration is significantly different than this and you don't understand * the issues involved, don't use bed PID until someone else verifies that your hardware works. */ -//#define PIDTEMPBED +#define PIDTEMPBED //#define BED_LIMIT_SWITCHING @@ -558,9 +560,15 @@ // 120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) // from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) - #define DEFAULT_bedKp 10.00 - #define DEFAULT_bedKi .023 - #define DEFAULT_bedKd 305.4 + #define DEFAULT_bedKp 356.34 + #define DEFAULT_bedKi 70.15 + #define DEFAULT_bedKd 452.51 + + // 120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) + // from pidautotune + #define DEFAULT_bedKp 356.34 + #define DEFAULT_bedKi 70.15 + #define DEFAULT_bedKd 452.51 // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. #endif // PIDTEMPBED @@ -634,7 +642,7 @@ * Note: For Bowden Extruders make this large enough to allow load/unload. */ #define PREVENT_LENGTHY_EXTRUDE -#define EXTRUDE_MAXLENGTH 200 +#define EXTRUDE_MAXLENGTH 450 //=========================================================================== //======================== Thermal Runaway Protection ======================= @@ -655,7 +663,7 @@ #define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders #define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed -#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber +//#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber #define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling //=========================================================================== @@ -743,15 +751,15 @@ * TMC5130, TMC5130_STANDALONE, TMC5160, TMC5160_STANDALONE * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'L6474', 'POWERSTEP01', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2160', 'TMC2160_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC2209', 'TMC2209_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE', 'TMC5160', 'TMC5160_STANDALONE'] */ -#define X_DRIVER_TYPE A4988 -#define Y_DRIVER_TYPE A4988 -#define Z_DRIVER_TYPE A4988 +#define X_DRIVER_TYPE TMC2208 +#define Y_DRIVER_TYPE TMC2208 +#define Z_DRIVER_TYPE TMC2208 //#define X2_DRIVER_TYPE A4988 //#define Y2_DRIVER_TYPE A4988 //#define Z2_DRIVER_TYPE A4988 //#define Z3_DRIVER_TYPE A4988 //#define Z4_DRIVER_TYPE A4988 -#define E0_DRIVER_TYPE A4988 +#define E0_DRIVER_TYPE TMC2208 //#define E1_DRIVER_TYPE A4988 //#define E2_DRIVER_TYPE A4988 //#define E3_DRIVER_TYPE A4988 @@ -762,7 +770,7 @@ // Enable this feature if all enabled endstop pins are interrupt-capable. // This will remove the need to poll the interrupt pins, saving many CPU cycles. -//#define ENDSTOP_INTERRUPTS_FEATURE +#define ENDSTOP_INTERRUPTS_FEATURE /** * Endstop Noise Threshold @@ -806,14 +814,14 @@ * Override with M92 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 500 } +#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 100, 97.5 } /** * Default Max Feed Rate (mm/s) * Override with M203 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 } +#define DEFAULT_MAX_FEEDRATE { 300, 300, 75, 300 } //#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 #if ENABLED(LIMITED_MAX_FR_EDITING) @@ -890,7 +898,7 @@ * * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained */ -//#define S_CURVE_ACCELERATION +#define S_CURVE_ACCELERATION //=========================================================================== //============================= Z Probe Options ============================= @@ -1065,7 +1073,7 @@ #define XY_PROBE_FEEDRATE (133*60) // Feedrate (mm/min) for the first approach when double-probing (MULTIPLE_PROBING == 2) -#define Z_PROBE_FEEDRATE_FAST (4*60) +#define Z_PROBE_FEEDRATE_FAST (25*60) // Feedrate (mm/min) for the "accurate" probe of each point #define Z_PROBE_FEEDRATE_SLOW (Z_PROBE_FEEDRATE_FAST / 2) @@ -1190,14 +1198,14 @@ // @section machine // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR false +#define INVERT_X_DIR true #define INVERT_Y_DIR true #define INVERT_Z_DIR false // @section extruder // For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR false +#define INVERT_E0_DIR true #define INVERT_E1_DIR false #define INVERT_E2_DIR false #define INVERT_E3_DIR false @@ -1208,7 +1216,7 @@ // @section homing -//#define NO_MOTION_BEFORE_HOMING // Inhibit movement until all axes have been homed. Also enable HOME_AFTER_DEACTIVATE for extra safety. +#define NO_MOTION_BEFORE_HOMING // Inhibit movement until all axes have been homed. Also enable HOME_AFTER_DEACTIVATE for extra safety. //#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated. Also enable NO_MOTION_BEFORE_HOMING for extra safety. /** @@ -1216,9 +1224,9 @@ * - Use a low value (i.e., Z_MIN_POS) if the nozzle falls down to the bed. * - Use a large value (i.e., Z_MAX_POS) if the bed falls down, away from the nozzle. */ -//#define Z_IDLE_HEIGHT Z_HOME_POS +#define Z_IDLE_HEIGHT Z_MAX_POS -//#define Z_HOMING_HEIGHT 4 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ... +#define Z_HOMING_HEIGHT 0 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ... // Be sure to have this much clearance over your Z_MAX_POS to prevent grinding. //#define Z_AFTER_HOMING 10 // (mm) Height to move to after homing Z @@ -1232,8 +1240,8 @@ // @section machine // The size of the printable area -#define X_BED_SIZE 200 -#define Y_BED_SIZE 200 +#define X_BED_SIZE 235 +#define Y_BED_SIZE 235 // Travel limits (mm) after homing, corresponding to endstop positions. #define X_MIN_POS 0 @@ -1241,7 +1249,7 @@ #define Z_MIN_POS 0 #define X_MAX_POS X_BED_SIZE #define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 200 +#define Z_MAX_POS 240 /** * Software Endstops @@ -1269,7 +1277,7 @@ #endif #if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS) - //#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD + #define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD #endif /** @@ -1527,13 +1535,13 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS +#define LEVEL_BED_CORNERS #if ENABLED(LEVEL_BED_CORNERS) #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner + #define LEVEL_CENTER_TOO // Move to the center after the last corner //#define LEVEL_CORNERS_USE_PROBE #if ENABLED(LEVEL_CORNERS_USE_PROBE) #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 @@ -1587,7 +1595,7 @@ // - Move the Z probe (or nozzle) to a defined XY point before Z Homing. // - Prevent Z homing when the Z probe is outside bed area. // -//#define Z_SAFE_HOMING +#define Z_SAFE_HOMING #if ENABLED(Z_SAFE_HOMING) #define Z_SAFE_HOMING_X_POINT X_CENTER // X point for Z homing @@ -1595,7 +1603,7 @@ #endif // Homing speeds (mm/min) -#define HOMING_FEEDRATE_MM_M { (50*60), (50*60), (4*60) } +#define HOMING_FEEDRATE_MM_M { (50*60), (50*60), (25*60) } // Validate that endstops are triggered on homing moves #define VALIDATE_HOMING_ENDSTOPS @@ -1672,10 +1680,10 @@ * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) */ -//#define EEPROM_SETTINGS // Persistent storage with M500 and M501 +#define EEPROM_SETTINGS // Persistent storage with M500 and M501 //#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. -#define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load +//#define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load #if ENABLED(EEPROM_SETTINGS) //#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. #endif @@ -1728,16 +1736,16 @@ * P1 Raise the nozzle always to Z-park height. * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. */ -//#define NOZZLE_PARK_FEATURE +#define NOZZLE_PARK_FEATURE #if ENABLED(NOZZLE_PARK_FEATURE) // Specify a park position as { X, Y, Z_raise } - #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 } + #define NOZZLE_PARK_POINT { (X_MIN_POS + 0), (Y_MIN_POS + 0), 40 } //#define NOZZLE_PARK_X_ONLY // X move only is required to park //#define NOZZLE_PARK_Y_ONLY // Y move only is required to park #define NOZZLE_PARK_Z_RAISE_MIN 2 // (mm) Always raise Z by at least this distance #define NOZZLE_PARK_XY_FEEDRATE 100 // (mm/s) X and Y axes feedrate (also used for delta Z axis) - #define NOZZLE_PARK_Z_FEEDRATE 5 // (mm/s) Z axis feedrate (not used for delta printers) + #define NOZZLE_PARK_Z_FEEDRATE 25 // (mm/s) Z axis feedrate (not used for delta printers) #endif /** @@ -1845,7 +1853,7 @@ * * View the current statistics with M78. */ -//#define PRINTCOUNTER +#define PRINTCOUNTER #if ENABLED(PRINTCOUNTER) #define PRINTCOUNTER_SAVE_INTERVAL 60 // (minutes) EEPROM save interval during print #endif @@ -2006,7 +2014,7 @@ // // Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. // -//#define INDIVIDUAL_AXIS_HOMING_MENU +#define INDIVIDUAL_AXIS_HOMING_MENU // // SPEAKER/BUZZER @@ -2287,7 +2295,7 @@ // This is RAMPS-compatible using a single 10-pin connector. // (For CR-10 owners who want to replace the Melzi Creality board but retain the display) // -//#define CR10_STOCKDISPLAY +#define CR10_STOCKDISPLAY // // Ender-2 OEM display, a variant of the MKS_MINI_12864 @@ -2682,16 +2690,16 @@ #endif // Support for Adafruit NeoPixel LED driver -//#define NEOPIXEL_LED +#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - #define NEOPIXEL_PIN 4 // LED driving pin + //#define NEOPIXEL_PIN 4 // LED driving pin //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_PIXELS 16 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + //#define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 255 // Initial brightness (0-255) + #define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE diff --git a/config/examples/Creality/Ender-3/MEEB-3DP/Configuration_adv.h b/config/examples/Creality/Ender-3/MEEB-3DP/Configuration_adv.h index 5335fa012a..93f4b5b490 100644 --- a/config/examples/Creality/Ender-3/MEEB-3DP/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/MEEB-3DP/Configuration_adv.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Creality/Ender-3/MEEB-3DP" + /** * Configuration_adv.h * @@ -437,10 +439,10 @@ * Hotend Idle Timeout * Prevent filament in the nozzle from charring and causing a critical jam. */ -//#define HOTEND_IDLE_TIMEOUT +#define HOTEND_IDLE_TIMEOUT #if ENABLED(HOTEND_IDLE_TIMEOUT) - #define HOTEND_IDLE_TIMEOUT_SEC (5*60) // (seconds) Time without extruder movement to trigger protection - #define HOTEND_IDLE_MIN_TRIGGER 180 // (°C) Minimum temperature to enable hotend protection + #define HOTEND_IDLE_TIMEOUT_SEC (3*60) // (seconds) Time without extruder movement to trigger protection + #define HOTEND_IDLE_MIN_TRIGGER 100 // (°C) Minimum temperature to enable hotend protection #define HOTEND_IDLE_NOZZLE_TARGET 0 // (°C) Safe temperature for the nozzle after timeout #define HOTEND_IDLE_BED_TARGET 0 // (°C) Safe temperature for the bed after timeout #endif @@ -461,16 +463,16 @@ * The fan turns on automatically whenever any driver is enabled and turns * off (or reduces to idle speed) shortly after drivers are turned off. */ -//#define USE_CONTROLLER_FAN +#define USE_CONTROLLER_FAN #if ENABLED(USE_CONTROLLER_FAN) - //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan + #define CONTROLLER_FAN_PIN FAN2_PIN //#define CONTROLLER_FAN_USE_Z_ONLY // With this option only the Z axis is considered //#define CONTROLLER_FAN_IGNORE_Z // Ignore Z stepper. Useful when stepper timeout is disabled. #define CONTROLLERFAN_SPEED_MIN 0 // (0-255) Minimum speed. (If set below this value the fan is turned off.) #define CONTROLLERFAN_SPEED_ACTIVE 255 // (0-255) Active speed, used when any motor is enabled - #define CONTROLLERFAN_SPEED_IDLE 0 // (0-255) Idle speed, used when motors are disabled + #define CONTROLLERFAN_SPEED_IDLE 127 #define CONTROLLERFAN_IDLE_TIME 60 // (seconds) Extra time to keep the fan running after disabling motors - //#define CONTROLLER_FAN_EDITABLE // Enable M710 configurable settings + #define CONTROLLER_FAN_EDITABLE // Enable M710 configurable settings #if ENABLED(CONTROLLER_FAN_EDITABLE) #define CONTROLLER_FAN_MENU // Enable the Controller Fan submenu #endif @@ -479,7 +481,7 @@ // When first starting the main fan, run it at full speed for the // given number of milliseconds. This gets the fan spinning reliably // before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) -//#define FAN_KICKSTART_TIME 100 +#define FAN_KICKSTART_TIME 200 // Some coolers may require a non-zero "off" state. //#define FAN_OFF_PWM 1 @@ -540,7 +542,7 @@ * Multiple extruders can be assigned to the same pin in which case * the fan will turn on when any selected extruder is above the threshold. */ -#define E0_AUTO_FAN_PIN -1 +#define E0_AUTO_FAN_PIN FAN1_PIN #define E1_AUTO_FAN_PIN -1 #define E2_AUTO_FAN_PIN -1 #define E3_AUTO_FAN_PIN -1 @@ -741,7 +743,7 @@ //#define HOMING_BACKOFF_POST_MM { 2, 2, 2 } // (mm) Backoff from endstops after homing -//#define QUICK_HOME // If G28 contains XY do a diagonal move first +#define QUICK_HOME // If G28 contains XY do a diagonal move first //#define HOME_Y_BEFORE_X // If G28 contains XY home Y before X //#define HOME_Z_FIRST // Home Z first. Requires a Z-MIN endstop (not a probe). //#define CODEPENDENT_XY_HOMING // If X/Y can't home without homing Y/X first @@ -942,7 +944,7 @@ // Increase the slowdown divisor for larger buffer sizes. #define SLOWDOWN #if ENABLED(SLOWDOWN) - #define SLOWDOWN_DIVISOR 2 + #define SLOWDOWN_DIVISOR 8 #endif /** @@ -1059,7 +1061,7 @@ * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the * lowest stepping frequencies. */ -//#define ADAPTIVE_STEP_SMOOTHING +#define ADAPTIVE_STEP_SMOOTHING /** * Custom Microstepping @@ -1150,7 +1152,7 @@ #endif // Play a beep when the feedrate is changed from the Status Screen -//#define BEEP_ON_FEEDRATE_CHANGE +#define BEEP_ON_FEEDRATE_CHANGE #if ENABLED(BEEP_ON_FEEDRATE_CHANGE) #define FEEDRATE_CHANGE_BEEP_DURATION 10 #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 @@ -1175,13 +1177,13 @@ #endif // Include a page of printer information in the LCD Main Menu - //#define LCD_INFO_MENU + #define LCD_INFO_MENU #if ENABLED(LCD_INFO_MENU) //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages #endif // BACK menu items keep the highlight at the top - //#define TURBO_BACK_MENU_ITEM + #define TURBO_BACK_MENU_ITEM // Add a mute option to the LCD menu //#define SOUND_MENU_ITEM @@ -1190,17 +1192,17 @@ * LED Control Menu * Add LED Control to the LCD menu */ - //#define LED_CONTROL_MENU + #define LED_CONTROL_MENU #if ENABLED(LED_CONTROL_MENU) #define LED_COLOR_PRESETS // Enable the Preset Color menu option //#define NEO2_COLOR_PRESETS // Enable a second NeoPixel Preset Color menu option #if ENABLED(LED_COLOR_PRESETS) - #define LED_USER_PRESET_RED 255 // User defined RED value - #define LED_USER_PRESET_GREEN 128 // User defined GREEN value - #define LED_USER_PRESET_BLUE 0 // User defined BLUE value + #define LED_USER_PRESET_RED 0 + #define LED_USER_PRESET_GREEN 0 + #define LED_USER_PRESET_BLUE 0 #define LED_USER_PRESET_WHITE 255 // User defined WHITE value #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity - //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup + #define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup #endif #if ENABLED(NEO2_COLOR_PRESETS) #define NEO2_USER_PRESET_RED 255 // User defined RED value @@ -1219,37 +1221,37 @@ #if HAS_DISPLAY // The timeout (in ms) to return to the status screen from sub-menus - //#define LCD_TIMEOUT_TO_STATUS 15000 + #define LCD_TIMEOUT_TO_STATUS 15000 #if ENABLED(SHOW_BOOTSCREEN) - #define BOOTSCREEN_TIMEOUT 4000 // (ms) Total Duration to display the boot screen(s) + #define BOOTSCREEN_TIMEOUT 500 #if EITHER(HAS_MARLINUI_U8GLIB, TFT_COLOR_UI) #define BOOT_MARLIN_LOGO_SMALL // Show a smaller Marlin logo on the Boot Screen (saving lots of flash) #endif #endif // Scroll a longer status message into view - //#define STATUS_MESSAGE_SCROLLING + #define STATUS_MESSAGE_SCROLLING // On the Info Screen, display XY with one decimal place when possible - //#define LCD_DECIMAL_SMALL_XY + #define LCD_DECIMAL_SMALL_XY // Add an 'M73' G-code to set the current percentage - //#define LCD_SET_PROGRESS_MANUALLY + #define LCD_SET_PROGRESS_MANUALLY // Show the E position (filament used) during printing - //#define LCD_SHOW_E_TOTAL + #define LCD_SHOW_E_TOTAL #endif #if EITHER(SDSUPPORT, LCD_SET_PROGRESS_MANUALLY) && ANY(HAS_MARLINUI_U8GLIB, HAS_MARLINUI_HD44780, IS_TFTGLCD_PANEL, EXTENSIBLE_UI) - //#define SHOW_REMAINING_TIME // Display estimated time to completion + #define SHOW_REMAINING_TIME // Display estimated time to completion #if ENABLED(SHOW_REMAINING_TIME) - //#define USE_M73_REMAINING_TIME // Use remaining time from M73 command instead of estimation - //#define ROTATE_PROGRESS_DISPLAY // Display (P)rogress, (E)lapsed, and (R)emaining time + #define USE_M73_REMAINING_TIME // Use remaining time from M73 command instead of estimation + #define ROTATE_PROGRESS_DISPLAY // Display (P)rogress, (E)lapsed, and (R)emaining time #endif #if EITHER(HAS_MARLINUI_U8GLIB, EXTENSIBLE_UI) - //#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits + #define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits #endif #if EITHER(HAS_MARLINUI_HD44780, IS_TFTGLCD_PANEL) @@ -1523,7 +1525,7 @@ // A bigger font is available for edit items. Costs 3120 bytes of PROGMEM. // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. - //#define USE_BIG_EDIT_FONT + #define USE_BIG_EDIT_FONT // A smaller font may be used on the Info Screen. Costs 2434 bytes of PROGMEM. // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. @@ -1571,14 +1573,14 @@ //#define STATUS_FLOWMETER_ANIM // Use multiple bitmaps to indicate coolant flow //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap - //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames - //#define STATUS_HEAT_PERCENT // Show heating in a progress bar - //#define BOOT_MARLIN_LOGO_ANIMATED // Animated Marlin logo. Costs ~‭3260 (or ~940) bytes of PROGMEM. + #define STATUS_FAN_FRAMES 4 + #define STATUS_HEAT_PERCENT // Show heating in a progress bar + #define BOOT_MARLIN_LOGO_ANIMATED // Animated Marlin logo. Costs ~‭3260 (or ~940) bytes of PROGMEM. // Frivolous Game Options - //#define MARLIN_BRICKOUT - //#define MARLIN_INVADERS - //#define MARLIN_SNAKE + #define MARLIN_BRICKOUT + #define MARLIN_INVADERS + #define MARLIN_SNAKE //#define GAMES_EASTER_EGG // Add extra blank lines above the "Games" sub-menu #endif // HAS_MARLINUI_U8GLIB @@ -1790,7 +1792,7 @@ * * Warning: Does not respect endstops! */ -//#define BABYSTEPPING +#define BABYSTEPPING #if ENABLED(BABYSTEPPING) //#define INTEGRATED_BABYSTEPPING // EXPERIMENTAL integration of babystepping into the Stepper ISR //#define BABYSTEP_WITHOUT_HOMING @@ -1798,20 +1800,20 @@ //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way //#define BABYSTEP_MILLIMETER_UNITS // Specify BABYSTEP_MULTIPLICATOR_(XY|Z) in mm instead of micro-steps - #define BABYSTEP_MULTIPLICATOR_Z 1 // (steps or mm) Steps or millimeter distance for each Z babystep + #define BABYSTEP_MULTIPLICATOR_Z 10 // (steps or mm) Steps or millimeter distance for each XY babystep #define BABYSTEP_MULTIPLICATOR_XY 1 // (steps or mm) Steps or millimeter distance for each XY babystep - //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. + #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. // Note: Extra time may be added to mitigate controller latency. - //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on doubleclick when printer is idle. + #define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on doubleclick when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) - #define MOVE_Z_IDLE_MULTIPLICATOR 1 // Multiply 1mm by this factor for the move step size. + #define MOVE_Z_IDLE_MULTIPLICATOR 10 #endif #endif - //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 + #define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping #if ENABLED(BABYSTEP_ZPROBE_OFFSET) @@ -1977,7 +1979,7 @@ // // G60/G61 Position Save and Return // -//#define SAVED_POSITIONS 1 // Each saved position slot costs 12 bytes +#define SAVED_POSITIONS 12 // // G2/G3 Arc Support @@ -1995,7 +1997,7 @@ #endif // Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes. -//#define BEZIER_CURVE_SUPPORT +#define BEZIER_CURVE_SUPPORT /** * Direct Stepping @@ -2005,7 +2007,7 @@ * less step aliasing by calculating all motions in advance. * Preparing your G-code: https://github.com/colinrgodsey/step-daemon */ -//#define DIRECT_STEPPING +#define DIRECT_STEPPING /** * G38 Probe Target @@ -2091,7 +2093,7 @@ // The ASCII buffer for serial input #define MAX_CMD_SIZE 96 -#define BUFSIZE 4 +#define BUFSIZE 32 // Transmission to Host Buffer Size // To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0. @@ -2100,13 +2102,13 @@ // For debug-echo: 128 bytes for the optimal speed. // Other output doesn't need to be that speedy. // :[0, 2, 4, 8, 16, 32, 64, 128, 256] -#define TX_BUFFER_SIZE 0 +#define TX_BUFFER_SIZE 32 // Host Receive Buffer Size // Without XON/XOFF flow control (see SERIAL_XON_XOFF below) 32 bytes should be enough. // To use flow control, set this buffer size to at least 1024 bytes. // :[0, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048] -//#define RX_BUFFER_SIZE 1024 +#define RX_BUFFER_SIZE 32 #if RX_BUFFER_SIZE >= 1024 // Enable to have the controller send XON/XOFF control characters to @@ -2115,7 +2117,7 @@ #endif // Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE +#define BAUD_RATE_GCODE #if ENABLED(SDSUPPORT) // Enable this option to collect and display the maximum @@ -2311,14 +2313,14 @@ * * Enable PARK_HEAD_ON_PAUSE to add the G-code M125 Pause and Park. */ -//#define ADVANCED_PAUSE_FEATURE +#define ADVANCED_PAUSE_FEATURE #if ENABLED(ADVANCED_PAUSE_FEATURE) #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. // This short retract is done immediately, before parking the nozzle. - #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast. + #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 30 #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload. + #define FILAMENT_CHANGE_UNLOAD_LENGTH 450 // For Bowden, the full length of the tube and nozzle. // For direct drive, the full length of the nozzle. // Set to 0 for manual unloading. @@ -2327,17 +2329,17 @@ // 0 to disable start loading and skip to fast load only #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast. #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle. + #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 200 // For Bowden, the full length of the tube and nozzle. // For direct drive, the full length of the nozzle. - //#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted. + #define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted. #define ADVANCED_PAUSE_PURGE_FEEDRATE 3 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate. #define ADVANCED_PAUSE_PURGE_LENGTH 50 // (mm) Length to extrude after loading. // Set to 0 for manual extrusion. // Filament can be extruded repeatedly from the Filament Change menu // until extrusion is consistent, and to purge old filament. #define ADVANCED_PAUSE_RESUME_PRIME 0 // (mm) Extra distance to prime nozzle after returning from park. - //#define ADVANCED_PAUSE_FANS_PAUSE // Turn off print-cooling fans while the machine is paused. + #define ADVANCED_PAUSE_FANS_PAUSE // Turn off print-cooling fans while the machine is paused. // Filament Unload does a Retract, Delay, and Purge first: #define FILAMENT_UNLOAD_PURGE_RETRACT 13 // (mm) Unload initial retract length. @@ -2349,11 +2351,11 @@ #define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed. #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change. - //#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. - //#define HOME_BEFORE_FILAMENT_CHANGE // If needed, home before parking for filament change + #define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. + #define HOME_BEFORE_FILAMENT_CHANGE // If needed, home before parking for filament change - //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. - //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) + #define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. + #define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) #endif // @section tmc @@ -2493,10 +2495,10 @@ #define INTERPOLATE true #if AXIS_IS_TMC(X) - #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. + #define X_CURRENT 1000 #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for sensorless homing #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 + #define X_RSENSE 0.1 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis #endif @@ -2511,10 +2513,10 @@ #endif #if AXIS_IS_TMC(Y) - #define Y_CURRENT 800 + #define Y_CURRENT 1000 #define Y_CURRENT_HOME Y_CURRENT #define Y_MICROSTEPS 16 - #define Y_RSENSE 0.11 + #define Y_RSENSE 0.1 #define Y_CHAIN_POS -1 //#define Y_INTERPOLATE true #endif @@ -2529,10 +2531,10 @@ #endif #if AXIS_IS_TMC(Z) - #define Z_CURRENT 800 + #define Z_CURRENT 1000 #define Z_CURRENT_HOME Z_CURRENT - #define Z_MICROSTEPS 16 - #define Z_RSENSE 0.11 + #define Z_MICROSTEPS 4 + #define Z_RSENSE 0.1 #define Z_CHAIN_POS -1 //#define Z_INTERPOLATE true #endif @@ -2565,9 +2567,9 @@ #endif #if AXIS_IS_TMC(E0) - #define E0_CURRENT 800 + #define E0_CURRENT 1000 #define E0_MICROSTEPS 16 - #define E0_RSENSE 0.11 + #define E0_RSENSE 0.1 #define E0_CHAIN_POS -1 //#define E0_INTERPOLATE true #endif @@ -2702,7 +2704,7 @@ */ #define STEALTHCHOP_XY #define STEALTHCHOP_Z - #define STEALTHCHOP_E + //#define STEALTHCHOP_E /** * Optimize spreadCycle chopper parameters by using predefined parameter sets @@ -2719,7 +2721,7 @@ * Define your own with: * { , , hysteresis_start[1..8] } */ - #define CHOPPER_TIMING CHOPPER_DEFAULT_12V // All axes (override below) + #define CHOPPER_TIMING CHOPPER_PRUSAMK3_24V // All axes (override below) //#define CHOPPER_TIMING_X CHOPPER_TIMING // For X Axes (override below) //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X //#define CHOPPER_TIMING_Y CHOPPER_TIMING // For Y Axes (override below) @@ -2748,7 +2750,7 @@ * M912 - Clear stepper driver overtemperature pre-warn condition flag. * M122 - Report driver parameters (Requires TMC_DEBUG) */ - //#define MONITOR_DRIVER_STATUS + #define MONITOR_DRIVER_STATUS #if ENABLED(MONITOR_DRIVER_STATUS) #define CURRENT_STEP_DOWN 50 // [mA] @@ -2763,17 +2765,17 @@ * STEALTHCHOP_(XY|Z|E) must be enabled to use HYBRID_THRESHOLD. * M913 X/Y/Z/E to live tune the setting */ - //#define HYBRID_THRESHOLD + #define HYBRID_THRESHOLD - #define X_HYBRID_THRESHOLD 100 // [mm/s] + #define X_HYBRID_THRESHOLD 130 #define X2_HYBRID_THRESHOLD 100 - #define Y_HYBRID_THRESHOLD 100 + #define Y_HYBRID_THRESHOLD 130 #define Y2_HYBRID_THRESHOLD 100 - #define Z_HYBRID_THRESHOLD 3 + #define Z_HYBRID_THRESHOLD 35 #define Z2_HYBRID_THRESHOLD 3 #define Z3_HYBRID_THRESHOLD 3 #define Z4_HYBRID_THRESHOLD 3 - #define E0_HYBRID_THRESHOLD 30 + #define E0_HYBRID_THRESHOLD 35 #define E1_HYBRID_THRESHOLD 30 #define E2_HYBRID_THRESHOLD 30 #define E3_HYBRID_THRESHOLD 30 @@ -2833,7 +2835,7 @@ * * Values from 0..1023, -1 to disable homing phase for that axis. */ - //#define TMC_HOME_PHASE { 896, 896, 896 } + #define TMC_HOME_PHASE { 896, 896, 896 } /** * Beta feature! @@ -2845,7 +2847,7 @@ * Enable M122 debugging command for TMC stepper drivers. * M122 S0/1 will enable continuous reporting. */ - //#define TMC_DEBUG + #define TMC_DEBUG /** * You can set your own advanced settings by filling in predefined functions. @@ -3104,7 +3106,7 @@ * Add the M240 G-code to take a photo. * The photo can be triggered by a digital pin or a physical movement. */ -//#define PHOTO_GCODE +#define PHOTO_GCODE #if ENABLED(PHOTO_GCODE) // A position to move to (and raise Z) before taking the photo //#define PHOTO_POSITION { X_MAX_POS - 5, Y_MAX_POS, 0 } // { xpos, ypos, zraise } (M240 X Y Z) @@ -3123,7 +3125,7 @@ //#define PHOTO_SWITCH_POSITION { X_MAX_POS, Y_MAX_POS } // { xpos, ypos } (M240 I J) // Duration to hold the switch or keep CHDK_PIN high - //#define PHOTO_SWITCH_MS 50 // (ms) (M240 D) + #define PHOTO_SWITCH_MS 50 /** * PHOTO_PULSES_US may need adjustment depending on board and camera model. @@ -3426,7 +3428,7 @@ */ #define EXTENDED_CAPABILITIES_REPORT #if ENABLED(EXTENDED_CAPABILITIES_REPORT) - //#define M115_GEOMETRY_REPORT + #define M115_GEOMETRY_REPORT #endif /** @@ -3434,7 +3436,7 @@ * Add the M16 G-code to compare a string to the MACHINE_NAME. * M16 with a non-matching string causes the printer to halt. */ -//#define EXPECTED_PRINTER_CHECK +#define EXPECTED_PRINTER_CHECK /** * Disable all Volumetric extrusion options @@ -3526,7 +3528,7 @@ * * Execute certain G-code commands immediately after power-on. */ -//#define STARTUP_COMMANDS "M17 Z" +#define STARTUP_COMMANDS "M300 S5000 P300" /** * G-code Macros @@ -3534,7 +3536,7 @@ * Add G-codes M810-M819 to define and run G-code macros. * Macros are not saved to EEPROM. */ -//#define GCODE_MACROS +#define GCODE_MACROS #if ENABLED(GCODE_MACROS) #define GCODE_MACROS_SLOTS 5 // Up to 10 may be used #define GCODE_MACROS_SLOT_SIZE 50 // Maximum length of a single macro @@ -3546,7 +3548,7 @@ */ // Custom Menu: Main Menu -//#define CUSTOM_MENU_MAIN +#define CUSTOM_MENU_MAIN #if ENABLED(CUSTOM_MENU_MAIN) //#define CUSTOM_MENU_MAIN_TITLE "Custom Commands" #define CUSTOM_MENU_MAIN_SCRIPT_DONE "M117 User Script Done" @@ -3562,16 +3564,16 @@ #define MAIN_MENU_ITEM_2_GCODE "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND) //#define MAIN_MENU_ITEM_2_CONFIRM - //#define MAIN_MENU_ITEM_3_DESC "Preheat for " PREHEAT_2_LABEL - //#define MAIN_MENU_ITEM_3_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) + #define MAIN_MENU_ITEM_3_DESC "Preheat for " PREHEAT_2_LABEL + #define MAIN_MENU_ITEM_3_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) //#define MAIN_MENU_ITEM_3_CONFIRM - //#define MAIN_MENU_ITEM_4_DESC "Heat Bed/Home/Level" - //#define MAIN_MENU_ITEM_4_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29" + #define MAIN_MENU_ITEM_4_DESC "Heat Bed/Home/Level" + #define MAIN_MENU_ITEM_4_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29" //#define MAIN_MENU_ITEM_4_CONFIRM - //#define MAIN_MENU_ITEM_5_DESC "Home & Info" - //#define MAIN_MENU_ITEM_5_GCODE "G28\nM503" + #define MAIN_MENU_ITEM_5_DESC "Home & Info" + #define MAIN_MENU_ITEM_5_GCODE "G28\nM503" //#define MAIN_MENU_ITEM_5_CONFIRM #endif @@ -3661,10 +3663,7 @@ * * Implement M486 to allow Marlin to skip objects */ -//#define CANCEL_OBJECTS -#if ENABLED(CANCEL_OBJECTS) - #define CANCEL_OBJECTS_REPORTING // Emit the current object as a status message -#endif +#define CANCEL_OBJECTS /** * I2C position encoders for closed loop control. @@ -4002,7 +4001,7 @@ // // M43 - display pin status, toggle pins, watch pins, watch endstops & toggle LED, test servo probe // -//#define PINS_DEBUGGING +#define PINS_DEBUGGING // Enable Marlin dev mode which adds some special commands //#define MARLIN_DEV_MODE diff --git a/config/examples/Creality/Ender-3/MKS Robin E3/V1.0/Configuration.h b/config/examples/Creality/Ender-3/MKS Robin E3/V1.0/Configuration.h index 78c2dc9160..883626040b 100644 --- a/config/examples/Creality/Ender-3/MKS Robin E3/V1.0/Configuration.h +++ b/config/examples/Creality/Ender-3/MKS Robin E3/V1.0/Configuration.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Creality/Ender-3/MKS Robin E3/V1.0" + /** * Configuration.h * @@ -69,7 +71,7 @@ // @section info // Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes. +#define STRING_CONFIG_H_AUTHOR "(thisiskeithb, Ender-3)" // Who made the changes. //#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) /** @@ -87,10 +89,10 @@ #define SHOW_BOOTSCREEN // Show the bitmap in Marlin/_Bootscreen.h on startup. -//#define SHOW_CUSTOM_BOOTSCREEN +#define SHOW_CUSTOM_BOOTSCREEN // Show the bitmap in Marlin/_Statusscreen.h on the status screen. -//#define CUSTOM_STATUS_SCREEN_IMAGE +#define CUSTOM_STATUS_SCREEN_IMAGE // @section machine @@ -102,7 +104,7 @@ * * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] */ -#define SERIAL_PORT 0 +#define SERIAL_PORT 1 /** * Select a secondary serial port on the board to use for communication with the host. @@ -127,18 +129,18 @@ * * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ -#define BAUDRATE 250000 +#define BAUDRATE 115200 // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH // Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_RAMPS_14_EFB + #define MOTHERBOARD BOARD_MKS_ROBIN_E3 #endif // Name displayed in the LCD "Ready" message and Info menu -//#define CUSTOM_MACHINE_NAME "3D Printer" +#define CUSTOM_MACHINE_NAME "Ender-3" // Printer's unique ID, used by some programs to differentiate between machines. // Choose your own or use a service like https://www.uuidgenerator.net/version4 @@ -424,7 +426,7 @@ #define TEMP_SENSOR_5 0 #define TEMP_SENSOR_6 0 #define TEMP_SENSOR_7 0 -#define TEMP_SENSOR_BED 0 +#define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 #define TEMP_SENSOR_COOLER 0 @@ -480,7 +482,7 @@ #define HEATER_5_MAXTEMP 275 #define HEATER_6_MAXTEMP 275 #define HEATER_7_MAXTEMP 275 -#define BED_MAXTEMP 150 +#define BED_MAXTEMP 125 #define CHAMBER_MAXTEMP 60 /** @@ -510,16 +512,17 @@ //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) // Set/get with gcode: M301 E[extruder number, 0-2] + // Creality Ender-3 #if ENABLED(PID_PARAMS_PER_HOTEND) // Specify between 1 and HOTENDS values per array. // If fewer than EXTRUDER values are provided, the last element will be repeated. - #define DEFAULT_Kp_LIST { 22.20, 22.20 } - #define DEFAULT_Ki_LIST { 1.08, 1.08 } - #define DEFAULT_Kd_LIST { 114.00, 114.00 } + #define DEFAULT_Kp_LIST { 21.73, 21.73 } + #define DEFAULT_Ki_LIST { 1.54, 1.54 } + #define DEFAULT_Kd_LIST { 76.55, 76.55 } #else - #define DEFAULT_Kp 22.20 - #define DEFAULT_Ki 1.08 - #define DEFAULT_Kd 114.00 + #define DEFAULT_Kp 21.73 + #define DEFAULT_Ki 1.54 + #define DEFAULT_Kd 76.55 #endif #endif // PIDTEMP @@ -540,7 +543,7 @@ * heater. If your configuration is significantly different than this and you don't understand * the issues involved, don't use bed PID until someone else verifies that your hardware works. */ -//#define PIDTEMPBED +#define PIDTEMPBED //#define BED_LIMIT_SWITCHING @@ -556,13 +559,11 @@ //#define MIN_BED_POWER 0 //#define PID_BED_DEBUG // Sends debug data to the serial port. - // 120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - // from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) - #define DEFAULT_bedKp 10.00 - #define DEFAULT_bedKi .023 - #define DEFAULT_bedKd 305.4 - // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. + #define DEFAULT_bedKp 50.71 + #define DEFAULT_bedKi 9.88 + #define DEFAULT_bedKd 173.43 + #endif // PIDTEMPBED //=========================================================================== @@ -634,7 +635,7 @@ * Note: For Bowden Extruders make this large enough to allow load/unload. */ #define PREVENT_LENGTHY_EXTRUDE -#define EXTRUDE_MAXLENGTH 200 +#define EXTRUDE_MAXLENGTH 600 //=========================================================================== //======================== Thermal Runaway Protection ======================= @@ -743,15 +744,15 @@ * TMC5130, TMC5130_STANDALONE, TMC5160, TMC5160_STANDALONE * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'L6474', 'POWERSTEP01', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2160', 'TMC2160_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC2209', 'TMC2209_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE', 'TMC5160', 'TMC5160_STANDALONE'] */ -#define X_DRIVER_TYPE A4988 -#define Y_DRIVER_TYPE A4988 -#define Z_DRIVER_TYPE A4988 +#define X_DRIVER_TYPE TMC2209 +#define Y_DRIVER_TYPE TMC2209 +#define Z_DRIVER_TYPE TMC2209 //#define X2_DRIVER_TYPE A4988 //#define Y2_DRIVER_TYPE A4988 //#define Z2_DRIVER_TYPE A4988 //#define Z3_DRIVER_TYPE A4988 //#define Z4_DRIVER_TYPE A4988 -#define E0_DRIVER_TYPE A4988 +#define E0_DRIVER_TYPE TMC2209 //#define E1_DRIVER_TYPE A4988 //#define E2_DRIVER_TYPE A4988 //#define E3_DRIVER_TYPE A4988 @@ -806,14 +807,14 @@ * Override with M92 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 500 } +#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 93 } /** * Default Max Feed Rate (mm/s) * Override with M203 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 } +#define DEFAULT_MAX_FEEDRATE { 500, 500, 5, 25 } //#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 #if ENABLED(LIMITED_MAX_FR_EDITING) @@ -826,7 +827,7 @@ * Override with M201 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 } +#define DEFAULT_MAX_ACCELERATION { 500, 500, 100, 5000 } //#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 #if ENABLED(LIMITED_MAX_ACCEL_EDITING) @@ -841,9 +842,9 @@ * M204 R Retract Acceleration * M204 T Travel Acceleration */ -#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves +#define DEFAULT_ACCELERATION 500 // X, Y, Z and E acceleration for printing moves +#define DEFAULT_RETRACT_ACCELERATION 500 // E acceleration for retracts +#define DEFAULT_TRAVEL_ACCELERATION 500 // X, Y, Z acceleration for travel (non printing) moves /** * Default Jerk limits (mm/s) @@ -877,7 +878,7 @@ * https://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html */ #if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.013 // (mm) Distance from real junction edge + #define JUNCTION_DEVIATION_MM 0.08 // (mm) Distance from real junction edge #define JD_HANDLE_SMALL_SEGMENTS // Use curvature estimation instead of just the junction angle // for small segments (< 1mm) with large junction angles (> 135°). #endif @@ -890,7 +891,7 @@ * * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained */ -//#define S_CURVE_ACCELERATION +#define S_CURVE_ACCELERATION //=========================================================================== //============================= Z Probe Options ============================= @@ -1190,14 +1191,14 @@ // @section machine // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR false +#define INVERT_X_DIR true #define INVERT_Y_DIR true #define INVERT_Z_DIR false // @section extruder // For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR false +#define INVERT_E0_DIR true #define INVERT_E1_DIR false #define INVERT_E2_DIR false #define INVERT_E3_DIR false @@ -1232,8 +1233,8 @@ // @section machine // The size of the printable area -#define X_BED_SIZE 200 -#define Y_BED_SIZE 200 +#define X_BED_SIZE 235 +#define Y_BED_SIZE 235 // Travel limits (mm) after homing, corresponding to endstop positions. #define X_MIN_POS 0 @@ -1241,7 +1242,7 @@ #define Z_MIN_POS 0 #define X_MAX_POS X_BED_SIZE #define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 200 +#define Z_MAX_POS 250 /** * Software Endstops @@ -1389,14 +1390,14 @@ //#define AUTO_BED_LEVELING_LINEAR //#define AUTO_BED_LEVELING_BILINEAR //#define AUTO_BED_LEVELING_UBL -//#define MESH_BED_LEVELING +#define MESH_BED_LEVELING /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable * leveling immediately after G28. */ -//#define RESTORE_LEVELING_AFTER_G28 +#define RESTORE_LEVELING_AFTER_G28 //#define ENABLE_LEVELING_AFTER_G28 /** @@ -1454,7 +1455,7 @@ #if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR) // Set the number of grid points per dimension. - #define GRID_MAX_POINTS_X 3 + #define GRID_MAX_POINTS_X 5 #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X // Probe along the Y axis, advancing X after each column @@ -1464,7 +1465,7 @@ // Beyond the probed grid, continue the implied tilt? // Default is to maintain the height of the nearest edge. - //#define EXTRAPOLATE_BEYOND_GRID + #define EXTRAPOLATE_BEYOND_GRID // // Experimental Subdivision of the grid by Catmull-Rom method. @@ -1518,22 +1519,22 @@ * Add a bed leveling sub-menu for ABL or MBL. * Include a guided procedure if manual probing is enabled. */ -//#define LCD_BED_LEVELING +#define LCD_BED_LEVELING #if ENABLED(LCD_BED_LEVELING) #define MESH_EDIT_Z_STEP 0.025 // (mm) Step size while manually probing Z axis. #define LCD_PROBE_Z_RANGE 4 // (mm) Z Range centered on Z_MIN_POS for LCD Z adjustment - //#define MESH_EDIT_MENU // Add a menu to edit mesh points + #define MESH_EDIT_MENU // Add a menu to edit mesh points #endif // Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS +#define LEVEL_BED_CORNERS #if ENABLED(LEVEL_BED_CORNERS) #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner + #define LEVEL_CENTER_TOO // Move to the center after the last corner //#define LEVEL_CORNERS_USE_PROBE #if ENABLED(LEVEL_CORNERS_USE_PROBE) #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 @@ -1595,7 +1596,7 @@ #endif // Homing speeds (mm/min) -#define HOMING_FEEDRATE_MM_M { (50*60), (50*60), (4*60) } +#define HOMING_FEEDRATE_MM_M { (20*60), (20*60), (4*60) } // Validate that endstops are triggered on homing moves #define VALIDATE_HOMING_ENDSTOPS @@ -1672,12 +1673,12 @@ * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) */ -//#define EEPROM_SETTINGS // Persistent storage with M500 and M501 +#define EEPROM_SETTINGS // Persistent storage with M500 and M501 //#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. #define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load #if ENABLED(EEPROM_SETTINGS) - //#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. + #define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. #endif // @@ -1706,16 +1707,16 @@ // Preheat Constants - Up to 5 are supported without changes // #define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 180 -#define PREHEAT_1_TEMP_BED 70 +#define PREHEAT_1_TEMP_HOTEND 185 +#define PREHEAT_1_TEMP_BED 45 #define PREHEAT_1_TEMP_CHAMBER 35 -#define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 +#define PREHEAT_1_FAN_SPEED 255 // Value from 0 to 255 #define PREHEAT_2_LABEL "ABS" #define PREHEAT_2_TEMP_HOTEND 240 #define PREHEAT_2_TEMP_BED 110 #define PREHEAT_2_TEMP_CHAMBER 35 -#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 +#define PREHEAT_2_FAN_SPEED 255 // Value from 0 to 255 /** * Nozzle Park @@ -1728,7 +1729,7 @@ * P1 Raise the nozzle always to Z-park height. * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. */ -//#define NOZZLE_PARK_FEATURE +#define NOZZLE_PARK_FEATURE #if ENABLED(NOZZLE_PARK_FEATURE) // Specify a park position as { X, Y, Z_raise } @@ -1845,7 +1846,7 @@ * * View the current statistics with M78. */ -//#define PRINTCOUNTER +#define PRINTCOUNTER #if ENABLED(PRINTCOUNTER) #define PRINTCOUNTER_SAVE_INTERVAL 60 // (minutes) EEPROM save interval during print #endif @@ -1936,7 +1937,7 @@ * SD Card support is disabled by default. If your controller has an SD slot, * you must uncomment the following option or it won't work. */ -//#define SDSUPPORT +#define SDSUPPORT /** * SD CARD: ENABLE CRC @@ -2006,7 +2007,7 @@ // // Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. // -//#define INDIVIDUAL_AXIS_HOMING_MENU +#define INDIVIDUAL_AXIS_HOMING_MENU // // SPEAKER/BUZZER @@ -2287,7 +2288,7 @@ // This is RAMPS-compatible using a single 10-pin connector. // (For CR-10 owners who want to replace the Melzi Creality board but retain the display) // -//#define CR10_STOCKDISPLAY +#define CR10_STOCKDISPLAY // // Ender-2 OEM display, a variant of the MKS_MINI_12864 diff --git a/config/examples/Creality/Ender-3/MKS Robin E3/V1.0/Configuration_adv.h b/config/examples/Creality/Ender-3/MKS Robin E3/V1.0/Configuration_adv.h index 5335fa012a..c262a71130 100644 --- a/config/examples/Creality/Ender-3/MKS Robin E3/V1.0/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/MKS Robin E3/V1.0/Configuration_adv.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Creality/Ender-3/MKS Robin E3/V1.0" + /** * Configuration_adv.h * @@ -741,7 +743,7 @@ //#define HOMING_BACKOFF_POST_MM { 2, 2, 2 } // (mm) Backoff from endstops after homing -//#define QUICK_HOME // If G28 contains XY do a diagonal move first +#define QUICK_HOME // If G28 contains XY do a diagonal move first //#define HOME_Y_BEFORE_X // If G28 contains XY home Y before X //#define HOME_Z_FIRST // Home Z first. Requires a Z-MIN endstop (not a probe). //#define CODEPENDENT_XY_HOMING // If X/Y can't home without homing Y/X first @@ -1175,7 +1177,7 @@ #endif // Include a page of printer information in the LCD Main Menu - //#define LCD_INFO_MENU + #define LCD_INFO_MENU #if ENABLED(LCD_INFO_MENU) //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages #endif @@ -1229,13 +1231,13 @@ #endif // Scroll a longer status message into view - //#define STATUS_MESSAGE_SCROLLING + #define STATUS_MESSAGE_SCROLLING // On the Info Screen, display XY with one decimal place when possible //#define LCD_DECIMAL_SMALL_XY // Add an 'M73' G-code to set the current percentage - //#define LCD_SET_PROGRESS_MANUALLY + #define LCD_SET_PROGRESS_MANUALLY // Show the E position (filament used) during printing //#define LCD_SHOW_E_TOTAL @@ -1361,16 +1363,16 @@ * - SDSORT_CACHE_NAMES will retain the sorted file listing in RAM. (Expensive!) * - SDSORT_DYNAMIC_RAM only uses RAM when the SD menu is visible. (Use with caution!) */ - //#define SDCARD_SORT_ALPHA + #define SDCARD_SORT_ALPHA // SD Card Sorting options #if ENABLED(SDCARD_SORT_ALPHA) #define SDSORT_LIMIT 40 // Maximum number of sorted items (10-256). Costs 27 bytes each. #define FOLDER_SORTING -1 // -1=above 0=none 1=below #define SDSORT_GCODE false // Allow turning sorting on/off with LCD and M34 G-code. - #define SDSORT_USES_RAM false // Pre-allocate a static array for faster pre-sorting. + #define SDSORT_USES_RAM true // Pre-allocate a static array for faster pre-sorting. #define SDSORT_USES_STACK false // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.) - #define SDSORT_CACHE_NAMES false // Keep sorted items in RAM longer for speedy performance. Most expensive option. + #define SDSORT_CACHE_NAMES true // Keep sorted items in RAM longer for speedy performance. Most expensive option. #define SDSORT_DYNAMIC_RAM false // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use! #define SDSORT_CACHE_VFATS 2 // Maximum number of 13-byte VFAT entries to use for sorting. // Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM. @@ -1381,10 +1383,10 @@ //#define UTF_FILENAME_SUPPORT // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT + #define LONG_FILENAME_HOST_SUPPORT // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES + #define SCROLL_LONG_FILENAMES // Leave the heaters on after Stop Print (not recommended!) //#define SD_ABORT_NO_COOLDOWN @@ -1476,7 +1478,7 @@ * * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] */ - //#define SDCARD_CONNECTION LCD + //#define SDCARD_CONNECTION ONBOARD // Enable if SD detect is rendered useless (e.g., by using an SD extender) //#define NO_SD_DETECT @@ -1790,7 +1792,7 @@ * * Warning: Does not respect endstops! */ -//#define BABYSTEPPING +#define BABYSTEPPING #if ENABLED(BABYSTEPPING) //#define INTEGRATED_BABYSTEPPING // EXPERIMENTAL integration of babystepping into the Stepper ISR //#define BABYSTEP_WITHOUT_HOMING @@ -1801,11 +1803,11 @@ #define BABYSTEP_MULTIPLICATOR_Z 1 // (steps or mm) Steps or millimeter distance for each Z babystep #define BABYSTEP_MULTIPLICATOR_XY 1 // (steps or mm) Steps or millimeter distance for each XY babystep - //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. + #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. // Note: Extra time may be added to mitigate controller latency. - //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on doubleclick when printer is idle. + #define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on doubleclick when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) #define MOVE_Z_IDLE_MULTIPLICATOR 1 // Multiply 1mm by this factor for the move step size. #endif @@ -1837,12 +1839,12 @@ * * See https://marlinfw.org/docs/features/lin_advance.html for full instructions. */ -//#define LIN_ADVANCE +#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) //#define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants - #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed + #define LIN_ADVANCE_K 0.0 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // If enabled, this will generate debug information output over USB. - //#define EXPERIMENTAL_SCURVE // Enable this option to permit S-Curve Acceleration + #define EXPERIMENTAL_SCURVE // Enable this option to permit S-Curve Acceleration #endif // @section leveling @@ -1982,7 +1984,7 @@ // // G2/G3 Arc Support // -#define ARC_SUPPORT // Disable this feature to save ~3226 bytes +//#define ARC_SUPPORT // Disable this feature to save ~3226 bytes #if ENABLED(ARC_SUPPORT) #define MM_PER_ARC_SEGMENT 1 // (mm) Length (or minimum length) of each arc segment //#define ARC_SEGMENTS_PER_R 1 // Max segment length, MM_PER = Min @@ -2141,7 +2143,7 @@ * Currently handles M108, M112, M410, M876 * NOTE: Not yet implemented for all platforms. */ -//#define EMERGENCY_PARSER +#define EMERGENCY_PARSER /** * Realtime Reporting (requires EMERGENCY_PARSER) @@ -2311,14 +2313,14 @@ * * Enable PARK_HEAD_ON_PAUSE to add the G-code M125 Pause and Park. */ -//#define ADVANCED_PAUSE_FEATURE +#define ADVANCED_PAUSE_FEATURE #if ENABLED(ADVANCED_PAUSE_FEATURE) #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. // This short retract is done immediately, before parking the nozzle. #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast. #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload. + #define FILAMENT_CHANGE_UNLOAD_LENGTH 400 // (mm) The length of filament for a complete unload. // For Bowden, the full length of the tube and nozzle. // For direct drive, the full length of the nozzle. // Set to 0 for manual unloading. @@ -2327,7 +2329,7 @@ // 0 to disable start loading and skip to fast load only #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast. #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle. + #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 350 // (mm) Load length of filament, from extruder gear to nozzle. // For Bowden, the full length of the tube and nozzle. // For direct drive, the full length of the nozzle. //#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted. @@ -2349,10 +2351,10 @@ #define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed. #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change. - //#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. - //#define HOME_BEFORE_FILAMENT_CHANGE // If needed, home before parking for filament change + #define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. + #define HOME_BEFORE_FILAMENT_CHANGE // If needed, home before parking for filament change - //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. + #define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) #endif @@ -2493,8 +2495,8 @@ #define INTERPOLATE true #if AXIS_IS_TMC(X) - #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. - #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for sensorless homing + #define X_CURRENT 580 // (mA) RMS current. Multiply by 1.414 for peak current. + #define X_CURRENT_HOME (X_CURRENT/2) // (mA) RMS current for sensorless homing #define X_MICROSTEPS 16 // 0..256 #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... @@ -2511,8 +2513,8 @@ #endif #if AXIS_IS_TMC(Y) - #define Y_CURRENT 800 - #define Y_CURRENT_HOME Y_CURRENT + #define Y_CURRENT 580 + #define Y_CURRENT_HOME (Y_CURRENT/2) #define Y_MICROSTEPS 16 #define Y_RSENSE 0.11 #define Y_CHAIN_POS -1 @@ -2529,7 +2531,7 @@ #endif #if AXIS_IS_TMC(Z) - #define Z_CURRENT 800 + #define Z_CURRENT 580 #define Z_CURRENT_HOME Z_CURRENT #define Z_MICROSTEPS 16 #define Z_RSENSE 0.11 @@ -2565,7 +2567,7 @@ #endif #if AXIS_IS_TMC(E0) - #define E0_CURRENT 800 + #define E0_CURRENT 650 #define E0_MICROSTEPS 16 #define E0_RSENSE 0.11 #define E0_CHAIN_POS -1 @@ -2719,7 +2721,7 @@ * Define your own with: * { , , hysteresis_start[1..8] } */ - #define CHOPPER_TIMING CHOPPER_DEFAULT_12V // All axes (override below) + #define CHOPPER_TIMING CHOPPER_DEFAULT_24V // All axes (override below) //#define CHOPPER_TIMING_X CHOPPER_TIMING // For X Axes (override below) //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X //#define CHOPPER_TIMING_Y CHOPPER_TIMING // For Y Axes (override below) @@ -2811,16 +2813,16 @@ #if EITHER(SENSORLESS_HOMING, SENSORLESS_PROBING) // TMC2209: 0...255. TMC2130: -64...63 - #define X_STALL_SENSITIVITY 8 + #define X_STALL_SENSITIVITY 100 #define X2_STALL_SENSITIVITY X_STALL_SENSITIVITY - #define Y_STALL_SENSITIVITY 8 + #define Y_STALL_SENSITIVITY 100 #define Y2_STALL_SENSITIVITY Y_STALL_SENSITIVITY //#define Z_STALL_SENSITIVITY 8 //#define Z2_STALL_SENSITIVITY Z_STALL_SENSITIVITY //#define Z3_STALL_SENSITIVITY Z_STALL_SENSITIVITY //#define Z4_STALL_SENSITIVITY Z_STALL_SENSITIVITY //#define SPI_ENDSTOPS // TMC2130 only - //#define IMPROVE_HOMING_RELIABILITY + #define IMPROVE_HOMING_RELIABILITY #endif /** @@ -2839,7 +2841,7 @@ * Beta feature! * Create a 50/50 square wave step pulse optimal for stepper drivers. */ - //#define SQUARE_WAVE_STEPPING + #define SQUARE_WAVE_STEPPING /** * Enable M122 debugging command for TMC stepper drivers. diff --git a/config/examples/Creality/Ender-3/MKS Robin E3/V1.1/Configuration.h b/config/examples/Creality/Ender-3/MKS Robin E3/V1.1/Configuration.h index 78c2dc9160..6f19f6fcb6 100644 --- a/config/examples/Creality/Ender-3/MKS Robin E3/V1.1/Configuration.h +++ b/config/examples/Creality/Ender-3/MKS Robin E3/V1.1/Configuration.h @@ -1,6 +1,6 @@ /** * Marlin 3D Printer Firmware - * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * Copyright (c) 2021 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * * Based on Sprinter and grbl. * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Creality/Ender-3/MKS Robin E3/V1.1" + /** * Configuration.h * @@ -69,7 +71,7 @@ // @section info // Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes. +#define STRING_CONFIG_H_AUTHOR "(thisiskeithb, Ender-3)" // Who made the changes. //#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) /** @@ -87,10 +89,10 @@ #define SHOW_BOOTSCREEN // Show the bitmap in Marlin/_Bootscreen.h on startup. -//#define SHOW_CUSTOM_BOOTSCREEN +#define SHOW_CUSTOM_BOOTSCREEN // Show the bitmap in Marlin/_Statusscreen.h on the status screen. -//#define CUSTOM_STATUS_SCREEN_IMAGE +#define CUSTOM_STATUS_SCREEN_IMAGE // @section machine @@ -102,7 +104,7 @@ * * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] */ -#define SERIAL_PORT 0 +#define SERIAL_PORT 1 /** * Select a secondary serial port on the board to use for communication with the host. @@ -127,18 +129,18 @@ * * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ -#define BAUDRATE 250000 +#define BAUDRATE 115200 // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH // Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_RAMPS_14_EFB + #define MOTHERBOARD BOARD_MKS_ROBIN_E3_V1_1 #endif // Name displayed in the LCD "Ready" message and Info menu -//#define CUSTOM_MACHINE_NAME "3D Printer" +#define CUSTOM_MACHINE_NAME "Ender-3" // Printer's unique ID, used by some programs to differentiate between machines. // Choose your own or use a service like https://www.uuidgenerator.net/version4 @@ -424,7 +426,7 @@ #define TEMP_SENSOR_5 0 #define TEMP_SENSOR_6 0 #define TEMP_SENSOR_7 0 -#define TEMP_SENSOR_BED 0 +#define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 #define TEMP_SENSOR_COOLER 0 @@ -480,7 +482,7 @@ #define HEATER_5_MAXTEMP 275 #define HEATER_6_MAXTEMP 275 #define HEATER_7_MAXTEMP 275 -#define BED_MAXTEMP 150 +#define BED_MAXTEMP 125 #define CHAMBER_MAXTEMP 60 /** @@ -510,16 +512,17 @@ //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) // Set/get with gcode: M301 E[extruder number, 0-2] + // Creality Ender-3 #if ENABLED(PID_PARAMS_PER_HOTEND) // Specify between 1 and HOTENDS values per array. // If fewer than EXTRUDER values are provided, the last element will be repeated. - #define DEFAULT_Kp_LIST { 22.20, 22.20 } - #define DEFAULT_Ki_LIST { 1.08, 1.08 } - #define DEFAULT_Kd_LIST { 114.00, 114.00 } + #define DEFAULT_Kp_LIST { 21.73, 21.73 } + #define DEFAULT_Ki_LIST { 1.54, 1.54 } + #define DEFAULT_Kd_LIST { 76.55, 76.55 } #else - #define DEFAULT_Kp 22.20 - #define DEFAULT_Ki 1.08 - #define DEFAULT_Kd 114.00 + #define DEFAULT_Kp 21.73 + #define DEFAULT_Ki 1.54 + #define DEFAULT_Kd 76.55 #endif #endif // PIDTEMP @@ -540,7 +543,7 @@ * heater. If your configuration is significantly different than this and you don't understand * the issues involved, don't use bed PID until someone else verifies that your hardware works. */ -//#define PIDTEMPBED +#define PIDTEMPBED //#define BED_LIMIT_SWITCHING @@ -556,13 +559,11 @@ //#define MIN_BED_POWER 0 //#define PID_BED_DEBUG // Sends debug data to the serial port. - // 120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - // from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) - #define DEFAULT_bedKp 10.00 - #define DEFAULT_bedKi .023 - #define DEFAULT_bedKd 305.4 - // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. + #define DEFAULT_bedKp 50.71 + #define DEFAULT_bedKi 9.88 + #define DEFAULT_bedKd 173.43 + #endif // PIDTEMPBED //=========================================================================== @@ -634,7 +635,7 @@ * Note: For Bowden Extruders make this large enough to allow load/unload. */ #define PREVENT_LENGTHY_EXTRUDE -#define EXTRUDE_MAXLENGTH 200 +#define EXTRUDE_MAXLENGTH 600 //=========================================================================== //======================== Thermal Runaway Protection ======================= @@ -743,15 +744,15 @@ * TMC5130, TMC5130_STANDALONE, TMC5160, TMC5160_STANDALONE * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'L6474', 'POWERSTEP01', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2160', 'TMC2160_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC2209', 'TMC2209_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE', 'TMC5160', 'TMC5160_STANDALONE'] */ -#define X_DRIVER_TYPE A4988 -#define Y_DRIVER_TYPE A4988 -#define Z_DRIVER_TYPE A4988 +#define X_DRIVER_TYPE TMC2209 +#define Y_DRIVER_TYPE TMC2209 +#define Z_DRIVER_TYPE TMC2209 //#define X2_DRIVER_TYPE A4988 //#define Y2_DRIVER_TYPE A4988 //#define Z2_DRIVER_TYPE A4988 //#define Z3_DRIVER_TYPE A4988 //#define Z4_DRIVER_TYPE A4988 -#define E0_DRIVER_TYPE A4988 +#define E0_DRIVER_TYPE TMC2209 //#define E1_DRIVER_TYPE A4988 //#define E2_DRIVER_TYPE A4988 //#define E3_DRIVER_TYPE A4988 @@ -806,14 +807,14 @@ * Override with M92 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 500 } +#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 93 } /** * Default Max Feed Rate (mm/s) * Override with M203 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 } +#define DEFAULT_MAX_FEEDRATE { 500, 500, 5, 25 } //#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 #if ENABLED(LIMITED_MAX_FR_EDITING) @@ -826,7 +827,7 @@ * Override with M201 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 } +#define DEFAULT_MAX_ACCELERATION { 500, 500, 100, 5000 } //#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 #if ENABLED(LIMITED_MAX_ACCEL_EDITING) @@ -841,9 +842,9 @@ * M204 R Retract Acceleration * M204 T Travel Acceleration */ -#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves +#define DEFAULT_ACCELERATION 500 // X, Y, Z and E acceleration for printing moves +#define DEFAULT_RETRACT_ACCELERATION 500 // E acceleration for retracts +#define DEFAULT_TRAVEL_ACCELERATION 500 // X, Y, Z acceleration for travel (non printing) moves /** * Default Jerk limits (mm/s) @@ -877,7 +878,7 @@ * https://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html */ #if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.013 // (mm) Distance from real junction edge + #define JUNCTION_DEVIATION_MM 0.08 // (mm) Distance from real junction edge #define JD_HANDLE_SMALL_SEGMENTS // Use curvature estimation instead of just the junction angle // for small segments (< 1mm) with large junction angles (> 135°). #endif @@ -890,7 +891,7 @@ * * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained */ -//#define S_CURVE_ACCELERATION +#define S_CURVE_ACCELERATION //=========================================================================== //============================= Z Probe Options ============================= @@ -1190,14 +1191,14 @@ // @section machine // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR false +#define INVERT_X_DIR true #define INVERT_Y_DIR true #define INVERT_Z_DIR false // @section extruder // For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR false +#define INVERT_E0_DIR true #define INVERT_E1_DIR false #define INVERT_E2_DIR false #define INVERT_E3_DIR false @@ -1232,8 +1233,8 @@ // @section machine // The size of the printable area -#define X_BED_SIZE 200 -#define Y_BED_SIZE 200 +#define X_BED_SIZE 235 +#define Y_BED_SIZE 235 // Travel limits (mm) after homing, corresponding to endstop positions. #define X_MIN_POS 0 @@ -1241,7 +1242,7 @@ #define Z_MIN_POS 0 #define X_MAX_POS X_BED_SIZE #define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 200 +#define Z_MAX_POS 250 /** * Software Endstops @@ -1389,14 +1390,14 @@ //#define AUTO_BED_LEVELING_LINEAR //#define AUTO_BED_LEVELING_BILINEAR //#define AUTO_BED_LEVELING_UBL -//#define MESH_BED_LEVELING +#define MESH_BED_LEVELING /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable * leveling immediately after G28. */ -//#define RESTORE_LEVELING_AFTER_G28 +#define RESTORE_LEVELING_AFTER_G28 //#define ENABLE_LEVELING_AFTER_G28 /** @@ -1454,7 +1455,7 @@ #if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR) // Set the number of grid points per dimension. - #define GRID_MAX_POINTS_X 3 + #define GRID_MAX_POINTS_X 5 #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X // Probe along the Y axis, advancing X after each column @@ -1464,7 +1465,7 @@ // Beyond the probed grid, continue the implied tilt? // Default is to maintain the height of the nearest edge. - //#define EXTRAPOLATE_BEYOND_GRID + #define EXTRAPOLATE_BEYOND_GRID // // Experimental Subdivision of the grid by Catmull-Rom method. @@ -1518,22 +1519,22 @@ * Add a bed leveling sub-menu for ABL or MBL. * Include a guided procedure if manual probing is enabled. */ -//#define LCD_BED_LEVELING +#define LCD_BED_LEVELING #if ENABLED(LCD_BED_LEVELING) #define MESH_EDIT_Z_STEP 0.025 // (mm) Step size while manually probing Z axis. #define LCD_PROBE_Z_RANGE 4 // (mm) Z Range centered on Z_MIN_POS for LCD Z adjustment - //#define MESH_EDIT_MENU // Add a menu to edit mesh points + #define MESH_EDIT_MENU // Add a menu to edit mesh points #endif // Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS +#define LEVEL_BED_CORNERS #if ENABLED(LEVEL_BED_CORNERS) #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner + #define LEVEL_CENTER_TOO // Move to the center after the last corner //#define LEVEL_CORNERS_USE_PROBE #if ENABLED(LEVEL_CORNERS_USE_PROBE) #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 @@ -1595,7 +1596,7 @@ #endif // Homing speeds (mm/min) -#define HOMING_FEEDRATE_MM_M { (50*60), (50*60), (4*60) } +#define HOMING_FEEDRATE_MM_M { (20*60), (20*60), (4*60) } // Validate that endstops are triggered on homing moves #define VALIDATE_HOMING_ENDSTOPS @@ -1672,12 +1673,12 @@ * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) */ -//#define EEPROM_SETTINGS // Persistent storage with M500 and M501 +#define EEPROM_SETTINGS // Persistent storage with M500 and M501 //#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. #define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load #if ENABLED(EEPROM_SETTINGS) - //#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. + #define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. #endif // @@ -1706,16 +1707,16 @@ // Preheat Constants - Up to 5 are supported without changes // #define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 180 -#define PREHEAT_1_TEMP_BED 70 +#define PREHEAT_1_TEMP_HOTEND 185 +#define PREHEAT_1_TEMP_BED 45 #define PREHEAT_1_TEMP_CHAMBER 35 -#define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 +#define PREHEAT_1_FAN_SPEED 255 // Value from 0 to 255 #define PREHEAT_2_LABEL "ABS" #define PREHEAT_2_TEMP_HOTEND 240 #define PREHEAT_2_TEMP_BED 110 #define PREHEAT_2_TEMP_CHAMBER 35 -#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 +#define PREHEAT_2_FAN_SPEED 255 // Value from 0 to 255 /** * Nozzle Park @@ -1728,7 +1729,7 @@ * P1 Raise the nozzle always to Z-park height. * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. */ -//#define NOZZLE_PARK_FEATURE +#define NOZZLE_PARK_FEATURE #if ENABLED(NOZZLE_PARK_FEATURE) // Specify a park position as { X, Y, Z_raise } @@ -1845,7 +1846,7 @@ * * View the current statistics with M78. */ -//#define PRINTCOUNTER +#define PRINTCOUNTER #if ENABLED(PRINTCOUNTER) #define PRINTCOUNTER_SAVE_INTERVAL 60 // (minutes) EEPROM save interval during print #endif @@ -1936,7 +1937,7 @@ * SD Card support is disabled by default. If your controller has an SD slot, * you must uncomment the following option or it won't work. */ -//#define SDSUPPORT +#define SDSUPPORT /** * SD CARD: ENABLE CRC @@ -2006,7 +2007,7 @@ // // Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. // -//#define INDIVIDUAL_AXIS_HOMING_MENU +#define INDIVIDUAL_AXIS_HOMING_MENU // // SPEAKER/BUZZER @@ -2287,7 +2288,7 @@ // This is RAMPS-compatible using a single 10-pin connector. // (For CR-10 owners who want to replace the Melzi Creality board but retain the display) // -//#define CR10_STOCKDISPLAY +#define CR10_STOCKDISPLAY // // Ender-2 OEM display, a variant of the MKS_MINI_12864 diff --git a/config/examples/Creality/Ender-3/MKS Robin E3/V1.1/Configuration_adv.h b/config/examples/Creality/Ender-3/MKS Robin E3/V1.1/Configuration_adv.h index 5335fa012a..7d9715f521 100644 --- a/config/examples/Creality/Ender-3/MKS Robin E3/V1.1/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/MKS Robin E3/V1.1/Configuration_adv.h @@ -1,6 +1,6 @@ /** * Marlin 3D Printer Firmware - * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * Copyright (c) 2021 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * * Based on Sprinter and grbl. * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Creality/Ender-3/MKS Robin E3/V1.1" + /** * Configuration_adv.h * @@ -741,7 +743,7 @@ //#define HOMING_BACKOFF_POST_MM { 2, 2, 2 } // (mm) Backoff from endstops after homing -//#define QUICK_HOME // If G28 contains XY do a diagonal move first +#define QUICK_HOME // If G28 contains XY do a diagonal move first //#define HOME_Y_BEFORE_X // If G28 contains XY home Y before X //#define HOME_Z_FIRST // Home Z first. Requires a Z-MIN endstop (not a probe). //#define CODEPENDENT_XY_HOMING // If X/Y can't home without homing Y/X first @@ -1175,7 +1177,7 @@ #endif // Include a page of printer information in the LCD Main Menu - //#define LCD_INFO_MENU + #define LCD_INFO_MENU #if ENABLED(LCD_INFO_MENU) //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages #endif @@ -1229,13 +1231,13 @@ #endif // Scroll a longer status message into view - //#define STATUS_MESSAGE_SCROLLING + #define STATUS_MESSAGE_SCROLLING // On the Info Screen, display XY with one decimal place when possible //#define LCD_DECIMAL_SMALL_XY // Add an 'M73' G-code to set the current percentage - //#define LCD_SET_PROGRESS_MANUALLY + #define LCD_SET_PROGRESS_MANUALLY // Show the E position (filament used) during printing //#define LCD_SHOW_E_TOTAL @@ -1361,16 +1363,16 @@ * - SDSORT_CACHE_NAMES will retain the sorted file listing in RAM. (Expensive!) * - SDSORT_DYNAMIC_RAM only uses RAM when the SD menu is visible. (Use with caution!) */ - //#define SDCARD_SORT_ALPHA + #define SDCARD_SORT_ALPHA // SD Card Sorting options #if ENABLED(SDCARD_SORT_ALPHA) #define SDSORT_LIMIT 40 // Maximum number of sorted items (10-256). Costs 27 bytes each. #define FOLDER_SORTING -1 // -1=above 0=none 1=below #define SDSORT_GCODE false // Allow turning sorting on/off with LCD and M34 G-code. - #define SDSORT_USES_RAM false // Pre-allocate a static array for faster pre-sorting. + #define SDSORT_USES_RAM true // Pre-allocate a static array for faster pre-sorting. #define SDSORT_USES_STACK false // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.) - #define SDSORT_CACHE_NAMES false // Keep sorted items in RAM longer for speedy performance. Most expensive option. + #define SDSORT_CACHE_NAMES true // Keep sorted items in RAM longer for speedy performance. Most expensive option. #define SDSORT_DYNAMIC_RAM false // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use! #define SDSORT_CACHE_VFATS 2 // Maximum number of 13-byte VFAT entries to use for sorting. // Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM. @@ -1381,10 +1383,10 @@ //#define UTF_FILENAME_SUPPORT // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT + #define LONG_FILENAME_HOST_SUPPORT // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES + #define SCROLL_LONG_FILENAMES // Leave the heaters on after Stop Print (not recommended!) //#define SD_ABORT_NO_COOLDOWN @@ -1476,7 +1478,7 @@ * * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] */ - //#define SDCARD_CONNECTION LCD + //#define SDCARD_CONNECTION ONBOARD // Enable if SD detect is rendered useless (e.g., by using an SD extender) //#define NO_SD_DETECT @@ -1790,7 +1792,7 @@ * * Warning: Does not respect endstops! */ -//#define BABYSTEPPING +#define BABYSTEPPING #if ENABLED(BABYSTEPPING) //#define INTEGRATED_BABYSTEPPING // EXPERIMENTAL integration of babystepping into the Stepper ISR //#define BABYSTEP_WITHOUT_HOMING @@ -1801,11 +1803,11 @@ #define BABYSTEP_MULTIPLICATOR_Z 1 // (steps or mm) Steps or millimeter distance for each Z babystep #define BABYSTEP_MULTIPLICATOR_XY 1 // (steps or mm) Steps or millimeter distance for each XY babystep - //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. + #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. // Note: Extra time may be added to mitigate controller latency. - //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on doubleclick when printer is idle. + #define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on doubleclick when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) #define MOVE_Z_IDLE_MULTIPLICATOR 1 // Multiply 1mm by this factor for the move step size. #endif @@ -1837,12 +1839,12 @@ * * See https://marlinfw.org/docs/features/lin_advance.html for full instructions. */ -//#define LIN_ADVANCE +#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) //#define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants - #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed + #define LIN_ADVANCE_K 0.0 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // If enabled, this will generate debug information output over USB. - //#define EXPERIMENTAL_SCURVE // Enable this option to permit S-Curve Acceleration + #define EXPERIMENTAL_SCURVE // Enable this option to permit S-Curve Acceleration #endif // @section leveling @@ -1982,7 +1984,7 @@ // // G2/G3 Arc Support // -#define ARC_SUPPORT // Disable this feature to save ~3226 bytes +//#define ARC_SUPPORT // Disable this feature to save ~3226 bytes #if ENABLED(ARC_SUPPORT) #define MM_PER_ARC_SEGMENT 1 // (mm) Length (or minimum length) of each arc segment //#define ARC_SEGMENTS_PER_R 1 // Max segment length, MM_PER = Min @@ -2141,7 +2143,7 @@ * Currently handles M108, M112, M410, M876 * NOTE: Not yet implemented for all platforms. */ -//#define EMERGENCY_PARSER +#define EMERGENCY_PARSER /** * Realtime Reporting (requires EMERGENCY_PARSER) @@ -2311,14 +2313,14 @@ * * Enable PARK_HEAD_ON_PAUSE to add the G-code M125 Pause and Park. */ -//#define ADVANCED_PAUSE_FEATURE +#define ADVANCED_PAUSE_FEATURE #if ENABLED(ADVANCED_PAUSE_FEATURE) #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. // This short retract is done immediately, before parking the nozzle. #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast. #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload. + #define FILAMENT_CHANGE_UNLOAD_LENGTH 400 // (mm) The length of filament for a complete unload. // For Bowden, the full length of the tube and nozzle. // For direct drive, the full length of the nozzle. // Set to 0 for manual unloading. @@ -2327,7 +2329,7 @@ // 0 to disable start loading and skip to fast load only #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast. #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle. + #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 350 // (mm) Load length of filament, from extruder gear to nozzle. // For Bowden, the full length of the tube and nozzle. // For direct drive, the full length of the nozzle. //#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted. @@ -2349,10 +2351,10 @@ #define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed. #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change. - //#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. - //#define HOME_BEFORE_FILAMENT_CHANGE // If needed, home before parking for filament change + #define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. + #define HOME_BEFORE_FILAMENT_CHANGE // If needed, home before parking for filament change - //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. + #define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) #endif @@ -2493,8 +2495,8 @@ #define INTERPOLATE true #if AXIS_IS_TMC(X) - #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. - #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for sensorless homing + #define X_CURRENT 580 // (mA) RMS current. Multiply by 1.414 for peak current. + #define X_CURRENT_HOME (X_CURRENT/2) // (mA) RMS current for sensorless homing #define X_MICROSTEPS 16 // 0..256 #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... @@ -2511,8 +2513,8 @@ #endif #if AXIS_IS_TMC(Y) - #define Y_CURRENT 800 - #define Y_CURRENT_HOME Y_CURRENT + #define Y_CURRENT 580 + #define Y_CURRENT_HOME (Y_CURRENT/2) #define Y_MICROSTEPS 16 #define Y_RSENSE 0.11 #define Y_CHAIN_POS -1 @@ -2529,7 +2531,7 @@ #endif #if AXIS_IS_TMC(Z) - #define Z_CURRENT 800 + #define Z_CURRENT 580 #define Z_CURRENT_HOME Z_CURRENT #define Z_MICROSTEPS 16 #define Z_RSENSE 0.11 @@ -2565,7 +2567,7 @@ #endif #if AXIS_IS_TMC(E0) - #define E0_CURRENT 800 + #define E0_CURRENT 650 #define E0_MICROSTEPS 16 #define E0_RSENSE 0.11 #define E0_CHAIN_POS -1 @@ -2719,7 +2721,7 @@ * Define your own with: * { , , hysteresis_start[1..8] } */ - #define CHOPPER_TIMING CHOPPER_DEFAULT_12V // All axes (override below) + #define CHOPPER_TIMING CHOPPER_DEFAULT_24V // All axes (override below) //#define CHOPPER_TIMING_X CHOPPER_TIMING // For X Axes (override below) //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X //#define CHOPPER_TIMING_Y CHOPPER_TIMING // For Y Axes (override below) @@ -2811,16 +2813,16 @@ #if EITHER(SENSORLESS_HOMING, SENSORLESS_PROBING) // TMC2209: 0...255. TMC2130: -64...63 - #define X_STALL_SENSITIVITY 8 + #define X_STALL_SENSITIVITY 100 #define X2_STALL_SENSITIVITY X_STALL_SENSITIVITY - #define Y_STALL_SENSITIVITY 8 + #define Y_STALL_SENSITIVITY 100 #define Y2_STALL_SENSITIVITY Y_STALL_SENSITIVITY //#define Z_STALL_SENSITIVITY 8 //#define Z2_STALL_SENSITIVITY Z_STALL_SENSITIVITY //#define Z3_STALL_SENSITIVITY Z_STALL_SENSITIVITY //#define Z4_STALL_SENSITIVITY Z_STALL_SENSITIVITY //#define SPI_ENDSTOPS // TMC2130 only - //#define IMPROVE_HOMING_RELIABILITY + #define IMPROVE_HOMING_RELIABILITY #endif /** @@ -2839,7 +2841,7 @@ * Beta feature! * Create a 50/50 square wave step pulse optimal for stepper drivers. */ - //#define SQUARE_WAVE_STEPPING + #define SQUARE_WAVE_STEPPING /** * Enable M122 debugging command for TMC stepper drivers. diff --git a/config/examples/Creality/Ender-3/MKS Robin E3P/Configuration.h b/config/examples/Creality/Ender-3/MKS Robin E3P/Configuration.h index 78c2dc9160..8ece0d9184 100644 --- a/config/examples/Creality/Ender-3/MKS Robin E3P/Configuration.h +++ b/config/examples/Creality/Ender-3/MKS Robin E3P/Configuration.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Creality/Ender-3/MKS Robin E3P" + /** * Configuration.h * @@ -69,7 +71,7 @@ // @section info // Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes. +#define STRING_CONFIG_H_AUTHOR "(ils15, Ender-3)" // Who made the changes. //#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) /** @@ -102,14 +104,14 @@ * * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] */ -#define SERIAL_PORT 0 +#define SERIAL_PORT -1 /** * Select a secondary serial port on the board to use for communication with the host. * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] */ -//#define SERIAL_PORT_2 -1 +#define SERIAL_PORT_2 1 /** * Select a third serial port on the board to use for communication with the host. @@ -134,11 +136,11 @@ // Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_RAMPS_14_EFB + #define MOTHERBOARD BOARD_MKS_ROBIN_E3P #endif // Name displayed in the LCD "Ready" message and Info menu -//#define CUSTOM_MACHINE_NAME "3D Printer" +#define CUSTOM_MACHINE_NAME "Ender-3" // Printer's unique ID, used by some programs to differentiate between machines. // Choose your own or use a service like https://www.uuidgenerator.net/version4 @@ -424,7 +426,7 @@ #define TEMP_SENSOR_5 0 #define TEMP_SENSOR_6 0 #define TEMP_SENSOR_7 0 -#define TEMP_SENSOR_BED 0 +#define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 #define TEMP_SENSOR_COOLER 0 @@ -480,7 +482,7 @@ #define HEATER_5_MAXTEMP 275 #define HEATER_6_MAXTEMP 275 #define HEATER_7_MAXTEMP 275 -#define BED_MAXTEMP 150 +#define BED_MAXTEMP 120 #define CHAMBER_MAXTEMP 60 /** @@ -505,21 +507,22 @@ #define PID_K1 0.95 // Smoothing factor within any PID loop #if ENABLED(PIDTEMP) - //#define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) - //#define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) + #define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) + #define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) // Set/get with gcode: M301 E[extruder number, 0-2] + // Creality Ender-3 #if ENABLED(PID_PARAMS_PER_HOTEND) // Specify between 1 and HOTENDS values per array. // If fewer than EXTRUDER values are provided, the last element will be repeated. - #define DEFAULT_Kp_LIST { 22.20, 22.20 } - #define DEFAULT_Ki_LIST { 1.08, 1.08 } - #define DEFAULT_Kd_LIST { 114.00, 114.00 } + #define DEFAULT_Kp_LIST { 21.73, 21.73 } + #define DEFAULT_Ki_LIST { 1.54, 1.54 } + #define DEFAULT_Kd_LIST { 76.55, 76.55 } #else - #define DEFAULT_Kp 22.20 - #define DEFAULT_Ki 1.08 - #define DEFAULT_Kd 114.00 + #define DEFAULT_Kp 21.73 + #define DEFAULT_Ki 1.54 + #define DEFAULT_Kd 76.55 #endif #endif // PIDTEMP @@ -540,7 +543,7 @@ * heater. If your configuration is significantly different than this and you don't understand * the issues involved, don't use bed PID until someone else verifies that your hardware works. */ -//#define PIDTEMPBED +#define PIDTEMPBED //#define BED_LIMIT_SWITCHING @@ -743,15 +746,15 @@ * TMC5130, TMC5130_STANDALONE, TMC5160, TMC5160_STANDALONE * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'L6474', 'POWERSTEP01', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2160', 'TMC2160_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC2209', 'TMC2209_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE', 'TMC5160', 'TMC5160_STANDALONE'] */ -#define X_DRIVER_TYPE A4988 -#define Y_DRIVER_TYPE A4988 -#define Z_DRIVER_TYPE A4988 +#define X_DRIVER_TYPE TMC2209 +#define Y_DRIVER_TYPE TMC2209 +#define Z_DRIVER_TYPE TMC2209 //#define X2_DRIVER_TYPE A4988 //#define Y2_DRIVER_TYPE A4988 //#define Z2_DRIVER_TYPE A4988 //#define Z3_DRIVER_TYPE A4988 //#define Z4_DRIVER_TYPE A4988 -#define E0_DRIVER_TYPE A4988 +#define E0_DRIVER_TYPE TMC2209 //#define E1_DRIVER_TYPE A4988 //#define E2_DRIVER_TYPE A4988 //#define E3_DRIVER_TYPE A4988 @@ -806,14 +809,14 @@ * Override with M92 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 500 } +#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 93 } /** * Default Max Feed Rate (mm/s) * Override with M203 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 } +#define DEFAULT_MAX_FEEDRATE { 500, 500, 5, 25 } //#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 #if ENABLED(LIMITED_MAX_FR_EDITING) @@ -826,7 +829,7 @@ * Override with M201 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 } +#define DEFAULT_MAX_ACCELERATION { 500, 500, 100, 5000 } //#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 #if ENABLED(LIMITED_MAX_ACCEL_EDITING) @@ -841,9 +844,9 @@ * M204 R Retract Acceleration * M204 T Travel Acceleration */ -#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves +#define DEFAULT_ACCELERATION 500 // X, Y, Z and E acceleration for printing moves +#define DEFAULT_RETRACT_ACCELERATION 500 // E acceleration for retracts +#define DEFAULT_TRAVEL_ACCELERATION 500 // X, Y, Z acceleration for travel (non printing) moves /** * Default Jerk limits (mm/s) @@ -877,7 +880,7 @@ * https://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html */ #if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.013 // (mm) Distance from real junction edge + #define JUNCTION_DEVIATION_MM 0.08 // (mm) Distance from real junction edge #define JD_HANDLE_SMALL_SEGMENTS // Use curvature estimation instead of just the junction angle // for small segments (< 1mm) with large junction angles (> 135°). #endif @@ -890,7 +893,7 @@ * * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained */ -//#define S_CURVE_ACCELERATION +#define S_CURVE_ACCELERATION //=========================================================================== //============================= Z Probe Options ============================= @@ -1197,7 +1200,7 @@ // @section extruder // For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR false +#define INVERT_E0_DIR true #define INVERT_E1_DIR false #define INVERT_E2_DIR false #define INVERT_E3_DIR false @@ -1232,8 +1235,8 @@ // @section machine // The size of the printable area -#define X_BED_SIZE 200 -#define Y_BED_SIZE 200 +#define X_BED_SIZE 235 +#define Y_BED_SIZE 235 // Travel limits (mm) after homing, corresponding to endstop positions. #define X_MIN_POS 0 @@ -1241,7 +1244,7 @@ #define Z_MIN_POS 0 #define X_MAX_POS X_BED_SIZE #define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 200 +#define Z_MAX_POS 250 /** * Software Endstops @@ -1389,7 +1392,7 @@ //#define AUTO_BED_LEVELING_LINEAR //#define AUTO_BED_LEVELING_BILINEAR //#define AUTO_BED_LEVELING_UBL -//#define MESH_BED_LEVELING +#define MESH_BED_LEVELING /** * Normally G28 leaves leveling disabled on completion. Enable one of @@ -1518,7 +1521,7 @@ * Add a bed leveling sub-menu for ABL or MBL. * Include a guided procedure if manual probing is enabled. */ -//#define LCD_BED_LEVELING +#define LCD_BED_LEVELING #if ENABLED(LCD_BED_LEVELING) #define MESH_EDIT_Z_STEP 0.025 // (mm) Step size while manually probing Z axis. @@ -1533,7 +1536,7 @@ #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner + #define LEVEL_CENTER_TOO // Move to the center after the last corner //#define LEVEL_CORNERS_USE_PROBE #if ENABLED(LEVEL_CORNERS_USE_PROBE) #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 @@ -1595,7 +1598,7 @@ #endif // Homing speeds (mm/min) -#define HOMING_FEEDRATE_MM_M { (50*60), (50*60), (4*60) } +#define HOMING_FEEDRATE_MM_M { (20*60), (20*60), (4*60) } // Validate that endstops are triggered on homing moves #define VALIDATE_HOMING_ENDSTOPS @@ -1672,7 +1675,7 @@ * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) */ -//#define EEPROM_SETTINGS // Persistent storage with M500 and M501 +#define EEPROM_SETTINGS // Persistent storage with M500 and M501 //#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. #define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load @@ -1706,16 +1709,16 @@ // Preheat Constants - Up to 5 are supported without changes // #define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 180 -#define PREHEAT_1_TEMP_BED 70 +#define PREHEAT_1_TEMP_HOTEND 185 +#define PREHEAT_1_TEMP_BED 45 #define PREHEAT_1_TEMP_CHAMBER 35 -#define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 +#define PREHEAT_1_FAN_SPEED 255 // Value from 0 to 255 #define PREHEAT_2_LABEL "ABS" #define PREHEAT_2_TEMP_HOTEND 240 -#define PREHEAT_2_TEMP_BED 110 +#define PREHEAT_2_TEMP_BED 90 #define PREHEAT_2_TEMP_CHAMBER 35 -#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 +#define PREHEAT_2_FAN_SPEED 255 // Value from 0 to 255 /** * Nozzle Park @@ -1936,7 +1939,7 @@ * SD Card support is disabled by default. If your controller has an SD slot, * you must uncomment the following option or it won't work. */ -//#define SDSUPPORT +#define SDSUPPORT /** * SD CARD: ENABLE CRC @@ -2448,7 +2451,7 @@ // 480x320, 3.5", SPI Display From MKS // Normally used in MKS Robin Nano V2 // -//#define MKS_TS35_V2_0 +#define MKS_TS35_V2_0 // // 320x240, 2.4", FSMC Display From MKS @@ -2525,7 +2528,7 @@ // Interface. Enable one of the following options: //#define TFT_INTERFACE_FSMC - //#define TFT_INTERFACE_SPI + #define TFT_INTERFACE_SPI // TFT Resolution. Enable one of the following options: //#define TFT_RES_320x240 @@ -2544,7 +2547,7 @@ * root of your SD card, together with the compiled firmware. */ //#define TFT_CLASSIC_UI -//#define TFT_COLOR_UI +#define TFT_COLOR_UI //#define TFT_LVGL_UI #if ENABLED(TFT_LVGL_UI) @@ -2573,7 +2576,7 @@ // // Touch Screen Settings // -//#define TOUCH_SCREEN +#define TOUCH_SCREEN #if ENABLED(TOUCH_SCREEN) #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus diff --git a/config/examples/Creality/Ender-3/MKS Robin E3P/Configuration_adv.h b/config/examples/Creality/Ender-3/MKS Robin E3P/Configuration_adv.h index 5335fa012a..e248640fcf 100644 --- a/config/examples/Creality/Ender-3/MKS Robin E3P/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/MKS Robin E3P/Configuration_adv.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Creality/Ender-3/MKS Robin E3P" + /** * Configuration_adv.h * @@ -1175,7 +1177,7 @@ #endif // Include a page of printer information in the LCD Main Menu - //#define LCD_INFO_MENU + #define LCD_INFO_MENU #if ENABLED(LCD_INFO_MENU) //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages #endif @@ -1512,7 +1514,7 @@ */ #if HAS_MARLINUI_U8GLIB // Show SD percentage next to the progress bar - //#define DOGM_SD_PERCENT + #define DOGM_SD_PERCENT // Save many cycles by drawing a hollow frame or no frame on the Info Screen //#define XYZ_NO_FRAME @@ -1790,7 +1792,7 @@ * * Warning: Does not respect endstops! */ -//#define BABYSTEPPING +#define BABYSTEPPING #if ENABLED(BABYSTEPPING) //#define INTEGRATED_BABYSTEPPING // EXPERIMENTAL integration of babystepping into the Stepper ISR //#define BABYSTEP_WITHOUT_HOMING diff --git a/config/examples/Creality/Ender-4/Configuration.h b/config/examples/Creality/Ender-4/Configuration.h index 78c2dc9160..c9d74ed85e 100644 --- a/config/examples/Creality/Ender-4/Configuration.h +++ b/config/examples/Creality/Ender-4/Configuration.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Creality/Ender-4" + /** * Configuration.h * @@ -69,7 +71,7 @@ // @section info // Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes. +#define STRING_CONFIG_H_AUTHOR "(Skorpi, Creality Ender-4, brandstaetter, xymopen)" // Who made the changes. //#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) /** @@ -127,18 +129,18 @@ * * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ -#define BAUDRATE 250000 +#define BAUDRATE 115200 // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH // Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_RAMPS_14_EFB + #define MOTHERBOARD BOARD_RAMPS_ENDER_4 #endif // Name displayed in the LCD "Ready" message and Info menu -//#define CUSTOM_MACHINE_NAME "3D Printer" +#define CUSTOM_MACHINE_NAME "Ender-4" // Printer's unique ID, used by some programs to differentiate between machines. // Choose your own or use a service like https://www.uuidgenerator.net/version4 @@ -424,7 +426,7 @@ #define TEMP_SENSOR_5 0 #define TEMP_SENSOR_6 0 #define TEMP_SENSOR_7 0 -#define TEMP_SENSOR_BED 0 +#define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 #define TEMP_SENSOR_COOLER 0 @@ -505,21 +507,22 @@ #define PID_K1 0.95 // Smoothing factor within any PID loop #if ENABLED(PIDTEMP) - //#define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) - //#define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) + #define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) + #define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) // Set/get with gcode: M301 E[extruder number, 0-2] + // Ender-4 #if ENABLED(PID_PARAMS_PER_HOTEND) // Specify between 1 and HOTENDS values per array. // If fewer than EXTRUDER values are provided, the last element will be repeated. - #define DEFAULT_Kp_LIST { 22.20, 22.20 } - #define DEFAULT_Ki_LIST { 1.08, 1.08 } - #define DEFAULT_Kd_LIST { 114.00, 114.00 } + #define DEFAULT_Kp_LIST { 16.67, 16.67 } + #define DEFAULT_Ki_LIST { 1.12, 1.12 } + #define DEFAULT_Kd_LIST { 62.14, 62.14 } #else - #define DEFAULT_Kp 22.20 - #define DEFAULT_Ki 1.08 - #define DEFAULT_Kd 114.00 + #define DEFAULT_Kp 16.67 + #define DEFAULT_Ki 1.12 + #define DEFAULT_Kd 62.14 #endif #endif // PIDTEMP @@ -540,7 +543,7 @@ * heater. If your configuration is significantly different than this and you don't understand * the issues involved, don't use bed PID until someone else verifies that your hardware works. */ -//#define PIDTEMPBED +#define PIDTEMPBED //#define BED_LIMIT_SWITCHING @@ -556,11 +559,10 @@ //#define MIN_BED_POWER 0 //#define PID_BED_DEBUG // Sends debug data to the serial port. - // 120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - // from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) - #define DEFAULT_bedKp 10.00 - #define DEFAULT_bedKi .023 - #define DEFAULT_bedKd 305.4 + // Ender-4 + #define DEFAULT_bedKp 426.68 + #define DEFAULT_bedKi 78.92 + #define DEFAULT_bedKd 576.71 // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. #endif // PIDTEMPBED @@ -627,14 +629,14 @@ * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** */ #define PREVENT_COLD_EXTRUSION -#define EXTRUDE_MINTEMP 170 +#define EXTRUDE_MINTEMP 190 /** * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. * Note: For Bowden Extruders make this large enough to allow load/unload. */ #define PREVENT_LENGTHY_EXTRUDE -#define EXTRUDE_MAXLENGTH 200 +#define EXTRUDE_MAXLENGTH 750 //=========================================================================== //======================== Thermal Runaway Protection ======================= @@ -666,7 +668,7 @@ // Enable one of the options below for CoreXY, CoreXZ, or CoreYZ kinematics, // either in the usual order or reversed -//#define COREXY +#define COREXY //#define COREXZ //#define COREYZ //#define COREYX @@ -717,7 +719,7 @@ #endif // Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. +#define X_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. #define Y_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. #define Z_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. #define X_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. @@ -806,14 +808,14 @@ * Override with M92 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 500 } +#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 93 } /** * Default Max Feed Rate (mm/s) * Override with M203 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 } +#define DEFAULT_MAX_FEEDRATE { 250, 250, 5, 25 } //#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 #if ENABLED(LIMITED_MAX_FR_EDITING) @@ -826,7 +828,7 @@ * Override with M201 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 } +#define DEFAULT_MAX_ACCELERATION { 500, 500, 100, 10000 } //#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 #if ENABLED(LIMITED_MAX_ACCEL_EDITING) @@ -841,9 +843,9 @@ * M204 R Retract Acceleration * M204 T Travel Acceleration */ -#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves +#define DEFAULT_ACCELERATION 500 // X, Y, Z and E acceleration for printing moves +#define DEFAULT_RETRACT_ACCELERATION 500 // E acceleration for retracts +#define DEFAULT_TRAVEL_ACCELERATION 1000 // X, Y, Z acceleration for travel (non printing) moves /** * Default Jerk limits (mm/s) @@ -853,11 +855,11 @@ * When changing speed and direction, if the difference is less than the * value set here, it may happen instantaneously. */ -//#define CLASSIC_JERK +#define CLASSIC_JERK #if ENABLED(CLASSIC_JERK) #define DEFAULT_XJERK 10.0 #define DEFAULT_YJERK 10.0 - #define DEFAULT_ZJERK 0.3 + #define DEFAULT_ZJERK 1.2 //#define TRAVEL_EXTRA_XYJERK 0.0 // Additional jerk allowance for all travel moves @@ -890,7 +892,7 @@ * * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained */ -//#define S_CURVE_ACCELERATION +#define S_CURVE_ACCELERATION //=========================================================================== //============================= Z Probe Options ============================= @@ -940,7 +942,7 @@ * Use G29 repeatedly, adjusting the Z height at each point with movement commands * or (with LCD_BED_LEVELING) the LCD controller. */ -//#define PROBE_MANUALLY +#define PROBE_MANUALLY /** * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. @@ -1065,7 +1067,7 @@ #define XY_PROBE_FEEDRATE (133*60) // Feedrate (mm/min) for the first approach when double-probing (MULTIPLE_PROBING == 2) -#define Z_PROBE_FEEDRATE_FAST (4*60) +#define Z_PROBE_FEEDRATE_FAST (7*60) // Feedrate (mm/min) for the "accurate" probe of each point #define Z_PROBE_FEEDRATE_SLOW (Z_PROBE_FEEDRATE_FAST / 2) @@ -1190,14 +1192,14 @@ // @section machine // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR false +#define INVERT_X_DIR true #define INVERT_Y_DIR true -#define INVERT_Z_DIR false +#define INVERT_Z_DIR true // @section extruder // For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR false +#define INVERT_E0_DIR true #define INVERT_E1_DIR false #define INVERT_E2_DIR false #define INVERT_E3_DIR false @@ -1232,8 +1234,8 @@ // @section machine // The size of the printable area -#define X_BED_SIZE 200 -#define Y_BED_SIZE 200 +#define X_BED_SIZE 220 +#define Y_BED_SIZE 220 // Travel limits (mm) after homing, corresponding to endstop positions. #define X_MIN_POS 0 @@ -1241,7 +1243,7 @@ #define Z_MIN_POS 0 #define X_MAX_POS X_BED_SIZE #define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 200 +#define Z_MAX_POS 310 /** * Software Endstops @@ -1269,7 +1271,7 @@ #endif #if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS) - //#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD + #define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD #endif /** @@ -1389,14 +1391,14 @@ //#define AUTO_BED_LEVELING_LINEAR //#define AUTO_BED_LEVELING_BILINEAR //#define AUTO_BED_LEVELING_UBL -//#define MESH_BED_LEVELING +#define MESH_BED_LEVELING /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable * leveling immediately after G28. */ -//#define RESTORE_LEVELING_AFTER_G28 +#define RESTORE_LEVELING_AFTER_G28 //#define ENABLE_LEVELING_AFTER_G28 /** @@ -1438,7 +1440,7 @@ /** * Enable the G26 Mesh Validation Pattern tool. */ - //#define G26_MESH_VALIDATION + #define G26_MESH_VALIDATION #if ENABLED(G26_MESH_VALIDATION) #define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle. #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for G26. @@ -1510,7 +1512,7 @@ #define GRID_MAX_POINTS_X 3 // Don't use more than 7 points per axis, implementation limited. #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS + #define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS #endif // BED_LEVELING @@ -1518,7 +1520,7 @@ * Add a bed leveling sub-menu for ABL or MBL. * Include a guided procedure if manual probing is enabled. */ -//#define LCD_BED_LEVELING +#define LCD_BED_LEVELING #if ENABLED(LCD_BED_LEVELING) #define MESH_EDIT_Z_STEP 0.025 // (mm) Step size while manually probing Z axis. @@ -1595,7 +1597,7 @@ #endif // Homing speeds (mm/min) -#define HOMING_FEEDRATE_MM_M { (50*60), (50*60), (4*60) } +#define HOMING_FEEDRATE_MM_M { (20*60), (20*60), (7*60) } // Validate that endstops are triggered on homing moves #define VALIDATE_HOMING_ENDSTOPS @@ -1672,7 +1674,7 @@ * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) */ -//#define EEPROM_SETTINGS // Persistent storage with M500 and M501 +#define EEPROM_SETTINGS // Persistent storage with M500 and M501 //#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. #define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load @@ -1706,8 +1708,8 @@ // Preheat Constants - Up to 5 are supported without changes // #define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 180 -#define PREHEAT_1_TEMP_BED 70 +#define PREHEAT_1_TEMP_HOTEND 200 +#define PREHEAT_1_TEMP_BED 60 #define PREHEAT_1_TEMP_CHAMBER 35 #define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 @@ -1728,7 +1730,7 @@ * P1 Raise the nozzle always to Z-park height. * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. */ -//#define NOZZLE_PARK_FEATURE +#define NOZZLE_PARK_FEATURE #if ENABLED(NOZZLE_PARK_FEATURE) // Specify a park position as { X, Y, Z_raise } @@ -1845,7 +1847,7 @@ * * View the current statistics with M78. */ -//#define PRINTCOUNTER +#define PRINTCOUNTER #if ENABLED(PRINTCOUNTER) #define PRINTCOUNTER_SAVE_INTERVAL 60 // (minutes) EEPROM save interval during print #endif @@ -1936,7 +1938,7 @@ * SD Card support is disabled by default. If your controller has an SD slot, * you must uncomment the following option or it won't work. */ -//#define SDSUPPORT +#define SDSUPPORT /** * SD CARD: ENABLE CRC @@ -2006,7 +2008,7 @@ // // Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. // -//#define INDIVIDUAL_AXIS_HOMING_MENU +#define INDIVIDUAL_AXIS_HOMING_MENU // // SPEAKER/BUZZER @@ -2037,7 +2039,7 @@ // // Note: Usually sold with a white PCB. // -//#define REPRAP_DISCOUNT_SMART_CONTROLLER +#define REPRAP_DISCOUNT_SMART_CONTROLLER // // GT2560 (YHCB2004) LCD Display diff --git a/config/examples/Creality/Ender-4/Configuration_adv.h b/config/examples/Creality/Ender-4/Configuration_adv.h index 5335fa012a..0f15ba2b9b 100644 --- a/config/examples/Creality/Ender-4/Configuration_adv.h +++ b/config/examples/Creality/Ender-4/Configuration_adv.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Creality/Ender-4" + /** * Configuration_adv.h * @@ -258,8 +260,8 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 20 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 16 // Seconds + #define WATCH_TEMP_INCREASE 4 // Degrees Celsius #endif /** @@ -573,15 +575,15 @@ /** * M355 Case Light on-off / brightness */ -//#define CASE_LIGHT_ENABLE +#define CASE_LIGHT_ENABLE #if ENABLED(CASE_LIGHT_ENABLE) //#define CASE_LIGHT_PIN 4 // Override the default pin if needed #define INVERT_CASE_LIGHT false // Set true if Case Light is ON when pin is LOW - #define CASE_LIGHT_DEFAULT_ON true // Set default power-up state on + #define CASE_LIGHT_DEFAULT_ON false // Set default power-up state on #define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // Set default power-up brightness (0-255, requires PWM pin) //#define CASE_LIGHT_NO_BRIGHTNESS // Disable brightness control. Enable for non-PWM lighting. //#define CASE_LIGHT_MAX_PWM 128 // Limit PWM duty cycle (0-255) - //#define CASE_LIGHT_MENU // Add Case Light options to the LCD menu + #define CASE_LIGHT_MENU // Add Case Light options to the LCD menu #if ENABLED(NEOPIXEL_LED) //#define CASE_LIGHT_USE_NEOPIXEL // Use NeoPixel LED as case light #endif @@ -741,7 +743,7 @@ //#define HOMING_BACKOFF_POST_MM { 2, 2, 2 } // (mm) Backoff from endstops after homing -//#define QUICK_HOME // If G28 contains XY do a diagonal move first +#define QUICK_HOME // If G28 contains XY do a diagonal move first //#define HOME_Y_BEFORE_X // If G28 contains XY home Y before X //#define HOME_Z_FIRST // Home Z first. Requires a Z-MIN endstop (not a probe). //#define CODEPENDENT_XY_HOMING // If X/Y can't home without homing Y/X first @@ -792,7 +794,7 @@ * differs, a mode set eeprom write will be completed at initialization. * Use the option below to force an eeprom write to a V3.1 probe regardless. */ - //#define BLTOUCH_SET_5V_MODE + #define BLTOUCH_SET_5V_MODE /** * Safety: Activate if connecting a probe with an unknown voltage mode. @@ -867,7 +869,7 @@ // On a 300mm bed a 5% grade would give a misalignment of ~1.5cm #define G34_MAX_GRADE 5 // (%) Maximum incline that G34 will handle - #define Z_STEPPER_ALIGN_ITERATIONS 5 // Number of iterations to apply during alignment + #define Z_STEPPER_ALIGN_ITERATIONS 3 // Number of iterations to apply during alignment #define Z_STEPPER_ALIGN_ACC 0.02 // Stop iterating early if the accuracy is better than this #define RESTORE_LEVELING_AFTER_G34 // Restore leveling after G34 is done? // After G34, re-home Z (G28 Z) or just calculate it from the last probe heights? @@ -925,10 +927,10 @@ * Set DISABLE_INACTIVE_? 'true' to shut down axis steppers after an idle period. * The Deactive Time can be overridden with M18 and M84. Set to 0 for No Timeout. */ -#define DEFAULT_STEPPER_DEACTIVE_TIME 120 +#define DEFAULT_STEPPER_DEACTIVE_TIME 300 #define DISABLE_INACTIVE_X true #define DISABLE_INACTIVE_Y true -#define DISABLE_INACTIVE_Z true // Set 'false' if the nozzle could fall onto your printed part! +#define DISABLE_INACTIVE_Z false // Set 'false' if the nozzle could fall onto your printed part! #define DISABLE_INACTIVE_E true // Default Minimum Feedrates for printing and travel moves @@ -1145,8 +1147,8 @@ // Change values more rapidly when the encoder is rotated faster #define ENCODER_RATE_MULTIPLIER #if ENABLED(ENCODER_RATE_MULTIPLIER) - #define ENCODER_10X_STEPS_PER_SEC 30 // (steps/s) Encoder rate for 10x speed - #define ENCODER_100X_STEPS_PER_SEC 80 // (steps/s) Encoder rate for 100x speed + #define ENCODER_10X_STEPS_PER_SEC 75 // (steps/s) Encoder rate for 10x speed + #define ENCODER_100X_STEPS_PER_SEC 160 // (steps/s) Encoder rate for 100x speed #endif // Play a beep when the feedrate is changed from the Status Screen @@ -1229,7 +1231,7 @@ #endif // Scroll a longer status message into view - //#define STATUS_MESSAGE_SCROLLING + #define STATUS_MESSAGE_SCROLLING // On the Info Screen, display XY with one decimal place when possible //#define LCD_DECIMAL_SMALL_XY @@ -1301,7 +1303,7 @@ //#define BROWSE_MEDIA_ON_INSERT // Open the file browser when media is inserted - #define EVENT_GCODE_SD_ABORT "G28XY" // G-code to run on SD Abort Print (e.g., "G28XY" or "G27") + #define EVENT_GCODE_SD_ABORT "G27" // G-code to run on SD Abort Print (e.g., "G28XY" or "G27") #if ENABLED(PRINTER_EVENT_LEDS) #define PE_LEDS_COMPLETED_TIME (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination @@ -1384,7 +1386,7 @@ //#define LONG_FILENAME_HOST_SUPPORT // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES + #define SCROLL_LONG_FILENAMES // Leave the heaters on after Stop Print (not recommended!) //#define SD_ABORT_NO_COOLDOWN @@ -1790,7 +1792,7 @@ * * Warning: Does not respect endstops! */ -//#define BABYSTEPPING +#define BABYSTEPPING #if ENABLED(BABYSTEPPING) //#define INTEGRATED_BABYSTEPPING // EXPERIMENTAL integration of babystepping into the Stepper ISR //#define BABYSTEP_WITHOUT_HOMING @@ -1798,10 +1800,10 @@ //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way //#define BABYSTEP_MILLIMETER_UNITS // Specify BABYSTEP_MULTIPLICATOR_(XY|Z) in mm instead of micro-steps - #define BABYSTEP_MULTIPLICATOR_Z 1 // (steps or mm) Steps or millimeter distance for each Z babystep - #define BABYSTEP_MULTIPLICATOR_XY 1 // (steps or mm) Steps or millimeter distance for each XY babystep + #define BABYSTEP_MULTIPLICATOR_Z 2 // (steps or mm) Steps or millimeter distance for each Z babystep + #define BABYSTEP_MULTIPLICATOR_XY 2 // (steps or mm) Steps or millimeter distance for each XY babystep - //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. + #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. // Note: Extra time may be added to mitigate controller latency. @@ -2141,7 +2143,7 @@ * Currently handles M108, M112, M410, M876 * NOTE: Not yet implemented for all platforms. */ -//#define EMERGENCY_PARSER +#define EMERGENCY_PARSER /** * Realtime Reporting (requires EMERGENCY_PARSER) @@ -2311,28 +2313,28 @@ * * Enable PARK_HEAD_ON_PAUSE to add the G-code M125 Pause and Park. */ -//#define ADVANCED_PAUSE_FEATURE +#define ADVANCED_PAUSE_FEATURE #if ENABLED(ADVANCED_PAUSE_FEATURE) #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. // This short retract is done immediately, before parking the nozzle. - #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast. + #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 35 // (mm/s) Unload filament feedrate. This can be pretty fast. #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload. + #define FILAMENT_CHANGE_UNLOAD_LENGTH 650 // (mm) The length of filament for a complete unload. // For Bowden, the full length of the tube and nozzle. // For direct drive, the full length of the nozzle. // Set to 0 for manual unloading. #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE 6 // (mm/s) Slow move when starting load. #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 0 // (mm) Slow length, to allow time to insert material. // 0 to disable start loading and skip to fast load only - #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast. + #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 35 // (mm/s) Load filament feedrate. This can be pretty fast. #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle. + #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 600 // (mm) Load length of filament, from extruder gear to nozzle. // For Bowden, the full length of the tube and nozzle. // For direct drive, the full length of the nozzle. - //#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted. + #define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted. #define ADVANCED_PAUSE_PURGE_FEEDRATE 3 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate. - #define ADVANCED_PAUSE_PURGE_LENGTH 50 // (mm) Length to extrude after loading. + #define ADVANCED_PAUSE_PURGE_LENGTH 60 // (mm) Length to extrude after loading. // Set to 0 for manual extrusion. // Filament can be extruded repeatedly from the Filament Change menu // until extrusion is consistent, and to purge old filament. @@ -2349,10 +2351,10 @@ #define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed. #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change. - //#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. - //#define HOME_BEFORE_FILAMENT_CHANGE // If needed, home before parking for filament change + #define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. + #define HOME_BEFORE_FILAMENT_CHANGE // If needed, home before parking for filament change - //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. + #define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) #endif @@ -3474,7 +3476,7 @@ //#define NO_WORKSPACE_OFFSETS // Extra options for the M114 "Current Position" report -//#define M114_DETAIL // Use 'M114` for details to check planner calculations +#define M114_DETAIL // Use 'M114` for details to check planner calculations //#define M114_REALTIME // Real current position based on forward kinematics //#define M114_LEGACY // M114 used to synchronize on every call. Enable if needed. diff --git a/config/examples/Creality/Ender-5 Plus/Configuration.h b/config/examples/Creality/Ender-5 Plus/Configuration.h index 78c2dc9160..667b05febe 100644 --- a/config/examples/Creality/Ender-5 Plus/Configuration.h +++ b/config/examples/Creality/Ender-5 Plus/Configuration.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Creality/Ender-5 Plus" + /** * Configuration.h * @@ -69,7 +71,7 @@ // @section info // Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes. +#define STRING_CONFIG_H_AUTHOR "(rubienr, Creality Ender-5 Plus)" // Who made the changes. //#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) /** @@ -127,22 +129,24 @@ * * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ -#define BAUDRATE 250000 +#define BAUDRATE 115200 // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH // Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_RAMPS_14_EFB + #define X_MAX_PIN 3 // creality connects X_MAX switch to X_MIN(_PIN) motherbard connector + #define Y_MAX_PIN 14 // creality connects Y_MAX switch to Y_MIN(_PIN) motherbard connector + #define MOTHERBOARD BOARD_RAMPS_CREALITY #endif // Name displayed in the LCD "Ready" message and Info menu -//#define CUSTOM_MACHINE_NAME "3D Printer" +#define CUSTOM_MACHINE_NAME "Ender-5 Plus" // Printer's unique ID, used by some programs to differentiate between machines. // Choose your own or use a service like https://www.uuidgenerator.net/version4 -//#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" +#define MACHINE_UUID "8cd276e6-41c7-4439-8f4e-f188537ebdac" // @section extruder @@ -424,7 +428,7 @@ #define TEMP_SENSOR_5 0 #define TEMP_SENSOR_6 0 #define TEMP_SENSOR_7 0 -#define TEMP_SENSOR_BED 0 +#define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 #define TEMP_SENSOR_COOLER 0 @@ -510,16 +514,17 @@ //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) // Set/get with gcode: M301 E[extruder number, 0-2] + // Creality Ender-5 Plus, auto tune result of: M303 E0 S225 C10 #if ENABLED(PID_PARAMS_PER_HOTEND) // Specify between 1 and HOTENDS values per array. // If fewer than EXTRUDER values are provided, the last element will be repeated. - #define DEFAULT_Kp_LIST { 22.20, 22.20 } - #define DEFAULT_Ki_LIST { 1.08, 1.08 } - #define DEFAULT_Kd_LIST { 114.00, 114.00 } + #define DEFAULT_Kp_LIST { 19.41, 19.41 } + #define DEFAULT_Ki_LIST { 1.38, 1.38 } + #define DEFAULT_Kd_LIST { 68.38, 68.38 } #else - #define DEFAULT_Kp 22.20 - #define DEFAULT_Ki 1.08 - #define DEFAULT_Kd 114.00 + #define DEFAULT_Kp 19.41 + #define DEFAULT_Ki 1.38 + #define DEFAULT_Kd 68.38 #endif #endif // PIDTEMP @@ -556,6 +561,9 @@ //#define MIN_BED_POWER 0 //#define PID_BED_DEBUG // Sends debug data to the serial port. + // Creality Ender-5 Plus, auto tune result of: M303 E-1 S60 C10 + // TODO rubienr auto tune: Command has an issue with "PID Autotune failed! Bad extruder number" -> auto tune postponed. + // 120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) // from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) #define DEFAULT_bedKp 10.00 @@ -634,7 +642,7 @@ * Note: For Bowden Extruders make this large enough to allow load/unload. */ #define PREVENT_LENGTHY_EXTRUDE -#define EXTRUDE_MAXLENGTH 200 +#define EXTRUDE_MAXLENGTH 750 //=========================================================================== //======================== Thermal Runaway Protection ======================= @@ -655,7 +663,7 @@ #define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders #define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed -#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber +//#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber #define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling //=========================================================================== @@ -683,11 +691,11 @@ // Specify here all the endstop connectors that are connected to any endstop or probe. // Almost all printers will be using one per axis. Probes will use one or more of the // extra connectors. Leave undefined any used for non-endstop and non-probe purposes. -#define USE_XMIN_PLUG -#define USE_YMIN_PLUG +//#define USE_XMIN_PLUG +//#define USE_YMIN_PLUG #define USE_ZMIN_PLUG -//#define USE_XMAX_PLUG -//#define USE_YMAX_PLUG +#define USE_XMAX_PLUG +#define USE_YMAX_PLUG //#define USE_ZMAX_PLUG // Enable pullup for all endstops to prevent a floating state @@ -719,11 +727,11 @@ // Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). #define X_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. #define Y_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. +#define Z_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. #define X_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. #define Y_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. #define Z_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_PROBE_ENDSTOP_INVERTING false // Set to true to invert the logic of the probe. +#define Z_MIN_PROBE_ENDSTOP_INVERTING true // Set to true to invert the logic of the probe. /** * Stepper Drivers @@ -776,7 +784,8 @@ * * :[2,3,4,5,6,7] */ -//#define ENDSTOP_NOISE_THRESHOLD 2 +// TODO rubienr: 100nF parallel to switch is too less -> find accurate capacity and disable ENDSTOP_NOISE_THRESHOLD +#define ENDSTOP_NOISE_THRESHOLD 2 // Check for stuck or disconnected endstops during homing moves. //#define DETECT_BROKEN_ENDSTOP @@ -806,14 +815,15 @@ * Override with M92 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 500 } +// E steps example: steps per revolution s=200, microstepping m=16, effective gear diameter d=10.95: sm/(πd) = 93.02 +#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 800, 93.02 } /** * Default Max Feed Rate (mm/s) * Override with M203 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 } +#define DEFAULT_MAX_FEEDRATE { 8000, 8000, 15, 15000 } //#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 #if ENABLED(LIMITED_MAX_FR_EDITING) @@ -826,7 +836,7 @@ * Override with M201 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 } +#define DEFAULT_MAX_ACCELERATION { 5000, 5000, 100, 10000 } //#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 #if ENABLED(LIMITED_MAX_ACCEL_EDITING) @@ -841,9 +851,9 @@ * M204 R Retract Acceleration * M204 T Travel Acceleration */ -#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves +#define DEFAULT_ACCELERATION 200 // X, Y, Z and E acceleration for printing moves +#define DEFAULT_RETRACT_ACCELERATION 1000 // E acceleration for retracts +#define DEFAULT_TRAVEL_ACCELERATION 1000 // X, Y, Z acceleration for travel (non printing) moves /** * Default Jerk limits (mm/s) @@ -867,7 +877,7 @@ #endif #endif -#define DEFAULT_EJERK 5.0 // May be used by Linear Advance +#define DEFAULT_EJERK 0.5 // May be used by Linear Advance /** * Junction Deviation Factor @@ -877,7 +887,7 @@ * https://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html */ #if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.013 // (mm) Distance from real junction edge + #define JUNCTION_DEVIATION_MM 0.15 // (mm) Distance from real junction edge #define JD_HANDLE_SMALL_SEGMENTS // Use curvature estimation instead of just the junction angle // for small segments (< 1mm) with large junction angles (> 135°). #endif @@ -963,7 +973,7 @@ /** * The BLTouch probe uses a Hall effect sensor and emulates a servo. */ -//#define BLTOUCH +#define BLTOUCH /** * Touch-MI Probe by hotends.fr @@ -1055,20 +1065,21 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +// Note on Creality Ender-5 Plus: Z offset must be adjusted (M851) every time once the probe has been loosen/unmounted. +#define NOZZLE_TO_PROBE_OFFSET { -44, -5, -3.0 } // Most probes should stay away from the edges of the bed, but // with NOZZLE_AS_PROBE this can be negative for a wider probing area. -#define PROBING_MARGIN 10 +#define PROBING_MARGIN 5 // X and Y axis travel speed (mm/min) between probes #define XY_PROBE_FEEDRATE (133*60) // Feedrate (mm/min) for the first approach when double-probing (MULTIPLE_PROBING == 2) -#define Z_PROBE_FEEDRATE_FAST (4*60) +#define Z_PROBE_FEEDRATE_FAST (15*60) // Feedrate (mm/min) for the "accurate" probe of each point -#define Z_PROBE_FEEDRATE_SLOW (Z_PROBE_FEEDRATE_FAST / 2) +#define Z_PROBE_FEEDRATE_SLOW (Z_PROBE_FEEDRATE_FAST / 4) /** * Probe Activation Switch @@ -1106,8 +1117,8 @@ * A total of 2 does fast/slow probes with a weighted average. * A total of 3 or more adds more slow probes, taking the average. */ -//#define MULTIPLE_PROBING 2 -//#define EXTRA_PROBING 1 +#define MULTIPLE_PROBING 2 +//#define EXTRA_PROBING 1 /** * Z probes require clearance when deploying, stowing, and moving between @@ -1123,15 +1134,15 @@ * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. */ -#define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow -#define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points -#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes -//#define Z_AFTER_PROBING 5 // Z position after probing is done +#define Z_CLEARANCE_DEPLOY_PROBE 5 // Z Clearance for Deploy/Stow +#define Z_CLEARANCE_BETWEEN_PROBES 2 // Z Clearance between probe points +#define Z_CLEARANCE_MULTI_PROBE 1 // Z Clearance between multiple probes +#define Z_AFTER_PROBING Z_AFTER_HOMING // Z position after probing is done -#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping +#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping // For M851 give a range for adjusting the Z probe offset -#define Z_PROBE_OFFSET_RANGE_MIN -20 +#define Z_PROBE_OFFSET_RANGE_MIN -4 #define Z_PROBE_OFFSET_RANGE_MAX 20 // Enable the M48 repeatability test to test probe accuracy @@ -1191,7 +1202,7 @@ // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR false -#define INVERT_Y_DIR true +#define INVERT_Y_DIR false #define INVERT_Z_DIR false // @section extruder @@ -1218,30 +1229,30 @@ */ //#define Z_IDLE_HEIGHT Z_HOME_POS -//#define Z_HOMING_HEIGHT 4 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ... +#define Z_HOMING_HEIGHT 10 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ... // Be sure to have this much clearance over your Z_MAX_POS to prevent grinding. -//#define Z_AFTER_HOMING 10 // (mm) Height to move to after homing Z +#define Z_AFTER_HOMING 17 // (mm) Height to move to after homing Z // Direction of endstops when homing; 1=MAX, -1=MIN // :[-1,1] -#define X_HOME_DIR -1 -#define Y_HOME_DIR -1 +#define X_HOME_DIR 1 +#define Y_HOME_DIR 1 #define Z_HOME_DIR -1 // @section machine // The size of the printable area -#define X_BED_SIZE 200 -#define Y_BED_SIZE 200 +#define X_BED_SIZE 358 +#define Y_BED_SIZE 370 // Travel limits (mm) after homing, corresponding to endstop positions. -#define X_MIN_POS 0 -#define Y_MIN_POS 0 -#define Z_MIN_POS 0 -#define X_MAX_POS X_BED_SIZE -#define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 200 +#define X_MIN_POS 8 +#define Y_MIN_POS -1 +#define Z_MIN_POS 0 +#define X_MAX_POS X_BED_SIZE + X_MIN_POS +#define Y_MAX_POS Y_BED_SIZE + Y_MIN_POS +#define Z_MAX_POS 405 + Z_MIN_POS /** * Software Endstops @@ -1285,7 +1296,7 @@ * RAMPS-based boards use SERVO3_PIN for the first runout sensor. * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. */ -//#define FILAMENT_RUNOUT_SENSOR +#define FILAMENT_RUNOUT_SENSOR #if ENABLED(FILAMENT_RUNOUT_SENSOR) #define FIL_RUNOUT_ENABLED_DEFAULT true // Enable the sensor on startup. Override with M412 followed by M500. #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. @@ -1388,7 +1399,7 @@ //#define AUTO_BED_LEVELING_3POINT //#define AUTO_BED_LEVELING_LINEAR //#define AUTO_BED_LEVELING_BILINEAR -//#define AUTO_BED_LEVELING_UBL +#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING /** @@ -1396,7 +1407,7 @@ * these options to restore the prior leveling state or to always enable * leveling immediately after G28. */ -//#define RESTORE_LEVELING_AFTER_G28 +#define RESTORE_LEVELING_AFTER_G28 //#define ENABLE_LEVELING_AFTER_G28 /** @@ -1486,13 +1497,13 @@ //#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh - #define MESH_INSET 1 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. + #define MESH_INSET 15 // Set Mesh bounds as an inset region of the bed + #define GRID_MAX_POINTS_X 7 // Don't use more than 15 points per axis, implementation limited. #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X //#define UBL_HILBERT_CURVE // Use Hilbert distribution for less travel when probing multiple points - #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle + //#define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used @@ -1587,7 +1598,7 @@ // - Move the Z probe (or nozzle) to a defined XY point before Z Homing. // - Prevent Z homing when the Z probe is outside bed area. // -//#define Z_SAFE_HOMING +#define Z_SAFE_HOMING #if ENABLED(Z_SAFE_HOMING) #define Z_SAFE_HOMING_X_POINT X_CENTER // X point for Z homing @@ -1595,7 +1606,7 @@ #endif // Homing speeds (mm/min) -#define HOMING_FEEDRATE_MM_M { (50*60), (50*60), (4*60) } +#define HOMING_FEEDRATE_MM_M { (90*60), (90*60), (15*60) } // Validate that endstops are triggered on homing moves #define VALIDATE_HOMING_ENDSTOPS @@ -1672,7 +1683,7 @@ * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) */ -//#define EEPROM_SETTINGS // Persistent storage with M500 and M501 +#define EEPROM_SETTINGS // Persistent storage with M500 and M501 //#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. #define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load @@ -1706,8 +1717,8 @@ // Preheat Constants - Up to 5 are supported without changes // #define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 180 -#define PREHEAT_1_TEMP_BED 70 +#define PREHEAT_1_TEMP_HOTEND 185 +#define PREHEAT_1_TEMP_BED 60 #define PREHEAT_1_TEMP_CHAMBER 35 #define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 @@ -1728,7 +1739,7 @@ * P1 Raise the nozzle always to Z-park height. * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. */ -//#define NOZZLE_PARK_FEATURE +#define NOZZLE_PARK_FEATURE #if ENABLED(NOZZLE_PARK_FEATURE) // Specify a park position as { X, Y, Z_raise } @@ -1921,7 +1932,7 @@ * * :['JAPANESE', 'WESTERN', 'CYRILLIC'] */ -#define DISPLAY_CHARSET_HD44780 JAPANESE +#define DISPLAY_CHARSET_HD44780 WESTERN /** * Info Screen Style (0:Classic, 1:Průša) @@ -1936,7 +1947,7 @@ * SD Card support is disabled by default. If your controller has an SD slot, * you must uncomment the following option or it won't work. */ -//#define SDSUPPORT +#define SDSUPPORT /** * SD CARD: ENABLE CRC @@ -1951,7 +1962,7 @@ * Disable all menus and only display the Status Screen, or * just remove some extraneous menu items to recover space. */ -//#define NO_LCD_MENUS +#define NO_LCD_MENUS //#define SLIM_LCD_MENUS // @@ -2384,7 +2395,14 @@ // ORIGIN : https://www.aliexpress.com/item/32993409517.html // FYSETC : https://www.aliexpress.com/item/32961471929.html // -//#define DGUS_LCD_UI_ORIGIN +// Flash display with DGUS Displays for Marlin: +// - Format the SD card to FAT32 with a allocation size of 4k. +// - Download https://github.com/coldtobi/Marlin_DGUS_Resources +// - Copy the downloaded DWIN_SET folder to the SD card. +// - Plug the microSD card into the back of the display. +// - Boot the display and wait for the update to complete. +// +#define DGUS_LCD_UI_ORIGIN //#define DGUS_LCD_UI_FYSETC //#define DGUS_LCD_UI_HIPRECY diff --git a/config/examples/Creality/Ender-5 Plus/Configuration_adv.h b/config/examples/Creality/Ender-5 Plus/Configuration_adv.h index 5335fa012a..49c668162f 100644 --- a/config/examples/Creality/Ender-5 Plus/Configuration_adv.h +++ b/config/examples/Creality/Ender-5 Plus/Configuration_adv.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Creality/Ender-5 Plus" + /** * Configuration_adv.h * @@ -736,12 +738,12 @@ //#define SENSORLESS_BACKOFF_MM { 2, 2 } // (mm) Backoff from endstops before sensorless homing -#define HOMING_BUMP_MM { 5, 5, 2 } // (mm) Backoff from endstops after first bump +#define HOMING_BUMP_MM { 5, 5, 4 } // (mm) Backoff from endstops after first bump #define HOMING_BUMP_DIVISOR { 2, 2, 4 } // Re-Bump Speed Divisor (Divides the Homing Feedrate) //#define HOMING_BACKOFF_POST_MM { 2, 2, 2 } // (mm) Backoff from endstops after homing -//#define QUICK_HOME // If G28 contains XY do a diagonal move first +#define QUICK_HOME // If G28 contains XY do a diagonal move first //#define HOME_Y_BEFORE_X // If G28 contains XY home Y before X //#define HOME_Z_FIRST // Home Z first. Requires a Z-MIN endstop (not a probe). //#define CODEPENDENT_XY_HOMING // If X/Y can't home without homing Y/X first @@ -808,7 +810,7 @@ * This feature was designed for Deltabots with very fast Z moves; however, higher speed Cartesians * might be able to use it. If the machine can't raise Z fast enough the BLTouch may go into ALARM. */ - //#define BLTOUCH_HS_MODE + #define BLTOUCH_HS_MODE // Safety: Enable voltage mode settings in the LCD menu. //#define BLTOUCH_LCD_VOLTAGE_MENU @@ -928,7 +930,7 @@ #define DEFAULT_STEPPER_DEACTIVE_TIME 120 #define DISABLE_INACTIVE_X true #define DISABLE_INACTIVE_Y true -#define DISABLE_INACTIVE_Z true // Set 'false' if the nozzle could fall onto your printed part! +#define DISABLE_INACTIVE_Z false // Set 'false' if the nozzle could fall onto your printed part! #define DISABLE_INACTIVE_E true // Default Minimum Feedrates for printing and travel moves @@ -1288,7 +1290,7 @@ #define SD_PROCEDURE_DEPTH 1 // Increase if you need more nested M32 calls #define SD_FINISHED_STEPPERRELEASE true // Disable steppers when SD Print is finished - #define SD_FINISHED_RELEASECOMMAND "M84" // Use "M84XYE" to keep Z enabled so your bed stays in place + #define SD_FINISHED_RELEASECOMMAND "M84XYE" // Use "M84XYE" to keep Z enabled so your bed stays in place // Reverse SD sort to show "more recent" files first, according to the card's FAT. // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended. @@ -1587,7 +1589,7 @@ // Additional options for DGUS / DWIN displays // #if HAS_DGUS_LCD - #define LCD_SERIAL_PORT 3 + #define LCD_SERIAL_PORT 2 #define LCD_BAUDRATE 115200 #define DGUS_RX_BUFFER_SIZE 128 @@ -1837,12 +1839,12 @@ * * See https://marlinfw.org/docs/features/lin_advance.html for full instructions. */ -//#define LIN_ADVANCE +#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) //#define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants - #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed + #define LIN_ADVANCE_K 0.6 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // If enabled, this will generate debug information output over USB. - //#define EXPERIMENTAL_SCURVE // Enable this option to permit S-Curve Acceleration + #define EXPERIMENTAL_SCURVE // Enable this option to permit S-Curve Acceleration #endif // @section leveling @@ -1888,10 +1890,10 @@ #if EITHER(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL) // Override the mesh area if the automatic (max) area is too large - //#define MESH_MIN_X MESH_INSET - //#define MESH_MIN_Y MESH_INSET - //#define MESH_MAX_X X_BED_SIZE - (MESH_INSET) - //#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET) + #define MESH_MIN_X MESH_INSET + #define MESH_MIN_Y MESH_INSET + #define MESH_MAX_X X_BED_SIZE - (MESH_INSET) + #define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET) #endif #if BOTH(AUTO_BED_LEVELING_UBL, EEPROM_SETTINGS) @@ -2204,21 +2206,21 @@ * * Note that M207 / M208 / M209 settings are saved to EEPROM. */ -//#define FWRETRACT +#define FWRETRACT #if ENABLED(FWRETRACT) #define FWRETRACT_AUTORETRACT // Override slicer retractions #if ENABLED(FWRETRACT_AUTORETRACT) #define MIN_AUTORETRACT 0.1 // (mm) Don't convert E moves under this length #define MAX_AUTORETRACT 10.0 // (mm) Don't convert E moves over this length #endif - #define RETRACT_LENGTH 3 // (mm) Default retract length (positive value) + #define RETRACT_LENGTH 5 // (mm) Default retract length (positive value) #define RETRACT_LENGTH_SWAP 13 // (mm) Default swap retract length (positive value) - #define RETRACT_FEEDRATE 45 // (mm/s) Default feedrate for retracting + #define RETRACT_FEEDRATE 100 // (mm/s) Default feedrate for retracting #define RETRACT_ZRAISE 0 // (mm) Default retract Z-raise #define RETRACT_RECOVER_LENGTH 0 // (mm) Default additional recover length (added to retract length on recover) #define RETRACT_RECOVER_LENGTH_SWAP 0 // (mm) Default additional swap recover length (added to retract length on recover from toolchange) - #define RETRACT_RECOVER_FEEDRATE 8 // (mm/s) Default feedrate for recovering from retraction - #define RETRACT_RECOVER_FEEDRATE_SWAP 8 // (mm/s) Default feedrate for recovering from swap retraction + #define RETRACT_RECOVER_FEEDRATE 50 // (mm/s) Default feedrate for recovering from retraction + #define RETRACT_RECOVER_FEEDRATE_SWAP 50 // (mm/s) Default feedrate for recovering from swap retraction #if ENABLED(MIXING_EXTRUDER) //#define RETRACT_SYNC_MIXING // Retract and restore all mixing steppers simultaneously #endif @@ -2252,12 +2254,12 @@ // Load / Unload #define TOOLCHANGE_FS_LENGTH 12 // (mm) Load / Unload length #define TOOLCHANGE_FS_EXTRA_RESUME_LENGTH 0 // (mm) Extra length for better restart, fine tune by LCD/Gcode) - #define TOOLCHANGE_FS_RETRACT_SPEED (50*60) // (mm/min) (Unloading) + #define TOOLCHANGE_FS_RETRACT_SPEED (60*60) // (mm/min) (Unloading) #define TOOLCHANGE_FS_UNRETRACT_SPEED (25*60) // (mm/min) (On SINGLENOZZLE or Bowden loading must be slowed down) // Longer prime to clean out a SINGLENOZZLE - #define TOOLCHANGE_FS_EXTRA_PRIME 0 // (mm) Extra priming length - #define TOOLCHANGE_FS_PRIME_SPEED (4.6*60) // (mm/min) Extra priming feedrate + #define TOOLCHANGE_FS_EXTRA_PRIME 2 // (mm) Extra priming length + #define TOOLCHANGE_FS_PRIME_SPEED (60*60) // (mm/min) Extra priming feedrate #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm/min) Retract before cooling for less stringing, better wipe, etc. // Cool after prime to reduce stringing @@ -2311,7 +2313,7 @@ * * Enable PARK_HEAD_ON_PAUSE to add the G-code M125 Pause and Park. */ -//#define ADVANCED_PAUSE_FEATURE +#define ADVANCED_PAUSE_FEATURE #if ENABLED(ADVANCED_PAUSE_FEATURE) #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. diff --git a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR E3 Turbo with BLTouch/Configuration.h b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR E3 Turbo with BLTouch/Configuration.h index 78c2dc9160..0fa54b22e9 100644 --- a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR E3 Turbo with BLTouch/Configuration.h +++ b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR E3 Turbo with BLTouch/Configuration.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Creality/Ender-5 Pro/BigTreeTech SKR E3 Turbo with BLTouch" + /** * Configuration.h * @@ -69,7 +71,7 @@ // @section info // Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes. +#define STRING_CONFIG_H_AUTHOR "(lpla, Ender-5-Pro)" // Who made the changes. //#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) /** @@ -102,14 +104,14 @@ * * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] */ -#define SERIAL_PORT 0 +#define SERIAL_PORT -1 /** * Select a secondary serial port on the board to use for communication with the host. * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] */ -//#define SERIAL_PORT_2 -1 +#define SERIAL_PORT_2 0 /** * Select a third serial port on the board to use for communication with the host. @@ -127,18 +129,18 @@ * * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ -#define BAUDRATE 250000 +#define BAUDRATE 115200 // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH // Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_RAMPS_14_EFB + #define MOTHERBOARD BOARD_BTT_SKR_E3_TURBO #endif // Name displayed in the LCD "Ready" message and Info menu -//#define CUSTOM_MACHINE_NAME "3D Printer" +#define CUSTOM_MACHINE_NAME "Ender-5 Pro" // Printer's unique ID, used by some programs to differentiate between machines. // Choose your own or use a service like https://www.uuidgenerator.net/version4 @@ -424,7 +426,7 @@ #define TEMP_SENSOR_5 0 #define TEMP_SENSOR_6 0 #define TEMP_SENSOR_7 0 -#define TEMP_SENSOR_BED 0 +#define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 #define TEMP_SENSOR_COOLER 0 @@ -480,7 +482,7 @@ #define HEATER_5_MAXTEMP 275 #define HEATER_6_MAXTEMP 275 #define HEATER_7_MAXTEMP 275 -#define BED_MAXTEMP 150 +#define BED_MAXTEMP 125 #define CHAMBER_MAXTEMP 60 /** @@ -505,21 +507,22 @@ #define PID_K1 0.95 // Smoothing factor within any PID loop #if ENABLED(PIDTEMP) - //#define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) - //#define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) + #define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) + #define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) // Set/get with gcode: M301 E[extruder number, 0-2] + // Creality Ender-5 Pro #if ENABLED(PID_PARAMS_PER_HOTEND) // Specify between 1 and HOTENDS values per array. // If fewer than EXTRUDER values are provided, the last element will be repeated. - #define DEFAULT_Kp_LIST { 22.20, 22.20 } - #define DEFAULT_Ki_LIST { 1.08, 1.08 } - #define DEFAULT_Kd_LIST { 114.00, 114.00 } + #define DEFAULT_Kp_LIST { 21.73, 21.73 } + #define DEFAULT_Ki_LIST { 1.54, 1.54 } + #define DEFAULT_Kd_LIST { 76.55, 76.55 } #else - #define DEFAULT_Kp 22.20 - #define DEFAULT_Ki 1.08 - #define DEFAULT_Kd 114.00 + #define DEFAULT_Kp 21.73 + #define DEFAULT_Ki 1.54 + #define DEFAULT_Kd 76.55 #endif #endif // PIDTEMP @@ -683,11 +686,11 @@ // Specify here all the endstop connectors that are connected to any endstop or probe. // Almost all printers will be using one per axis. Probes will use one or more of the // extra connectors. Leave undefined any used for non-endstop and non-probe purposes. -#define USE_XMIN_PLUG -#define USE_YMIN_PLUG +//#define USE_XMIN_PLUG +//#define USE_YMIN_PLUG #define USE_ZMIN_PLUG -//#define USE_XMAX_PLUG -//#define USE_YMAX_PLUG +#define USE_XMAX_PLUG +#define USE_YMAX_PLUG //#define USE_ZMAX_PLUG // Enable pullup for all endstops to prevent a floating state @@ -743,15 +746,15 @@ * TMC5130, TMC5130_STANDALONE, TMC5160, TMC5160_STANDALONE * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'L6474', 'POWERSTEP01', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2160', 'TMC2160_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC2209', 'TMC2209_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE', 'TMC5160', 'TMC5160_STANDALONE'] */ -#define X_DRIVER_TYPE A4988 -#define Y_DRIVER_TYPE A4988 -#define Z_DRIVER_TYPE A4988 +#define X_DRIVER_TYPE TMC2209 +#define Y_DRIVER_TYPE TMC2209 +#define Z_DRIVER_TYPE TMC2209 //#define X2_DRIVER_TYPE A4988 //#define Y2_DRIVER_TYPE A4988 //#define Z2_DRIVER_TYPE A4988 //#define Z3_DRIVER_TYPE A4988 //#define Z4_DRIVER_TYPE A4988 -#define E0_DRIVER_TYPE A4988 +#define E0_DRIVER_TYPE TMC2209 //#define E1_DRIVER_TYPE A4988 //#define E2_DRIVER_TYPE A4988 //#define E3_DRIVER_TYPE A4988 @@ -806,14 +809,14 @@ * Override with M92 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 500 } +#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 800, 93 } /** * Default Max Feed Rate (mm/s) * Override with M203 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 } +#define DEFAULT_MAX_FEEDRATE { 500, 500, 5, 25 } //#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 #if ENABLED(LIMITED_MAX_FR_EDITING) @@ -826,7 +829,7 @@ * Override with M201 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 } +#define DEFAULT_MAX_ACCELERATION { 500, 500, 100, 5000 } //#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 #if ENABLED(LIMITED_MAX_ACCEL_EDITING) @@ -841,9 +844,9 @@ * M204 R Retract Acceleration * M204 T Travel Acceleration */ -#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves +#define DEFAULT_ACCELERATION 500 // X, Y, Z and E acceleration for printing moves +#define DEFAULT_RETRACT_ACCELERATION 500 // E acceleration for retracts +#define DEFAULT_TRAVEL_ACCELERATION 500 // X, Y, Z acceleration for travel (non printing) moves /** * Default Jerk limits (mm/s) @@ -877,7 +880,7 @@ * https://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html */ #if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.013 // (mm) Distance from real junction edge + #define JUNCTION_DEVIATION_MM 0.08 // (mm) Distance from real junction edge #define JD_HANDLE_SMALL_SEGMENTS // Use curvature estimation instead of just the junction angle // for small segments (< 1mm) with large junction angles (> 135°). #endif @@ -906,10 +909,10 @@ * The probe replaces the Z-MIN endstop and is used for Z homing. * (Automatically enables USE_PROBE_FOR_Z_HOMING.) */ -#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN +//#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN // Force the use of the probe for Z-axis homing -//#define USE_PROBE_FOR_Z_HOMING +#define USE_PROBE_FOR_Z_HOMING /** * Z_MIN_PROBE_PIN @@ -963,7 +966,7 @@ /** * The BLTouch probe uses a Hall effect sensor and emulates a servo. */ -//#define BLTOUCH +#define BLTOUCH /** * Touch-MI Probe by hotends.fr @@ -1055,7 +1058,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +#define NOZZLE_TO_PROBE_OFFSET { -40, -10, -1.85 } // Most probes should stay away from the edges of the bed, but // with NOZZLE_AS_PROBE this can be negative for a wider probing area. @@ -1190,14 +1193,14 @@ // @section machine // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR false +#define INVERT_X_DIR true #define INVERT_Y_DIR true -#define INVERT_Z_DIR false +#define INVERT_Z_DIR true // @section extruder // For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR false +#define INVERT_E0_DIR true #define INVERT_E1_DIR false #define INVERT_E2_DIR false #define INVERT_E3_DIR false @@ -1225,15 +1228,15 @@ // Direction of endstops when homing; 1=MAX, -1=MIN // :[-1,1] -#define X_HOME_DIR -1 -#define Y_HOME_DIR -1 +#define X_HOME_DIR 1 +#define Y_HOME_DIR 1 #define Z_HOME_DIR -1 // @section machine // The size of the printable area -#define X_BED_SIZE 200 -#define Y_BED_SIZE 200 +#define X_BED_SIZE 220 +#define Y_BED_SIZE 220 // Travel limits (mm) after homing, corresponding to endstop positions. #define X_MIN_POS 0 @@ -1241,7 +1244,7 @@ #define Z_MIN_POS 0 #define X_MAX_POS X_BED_SIZE #define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 200 +#define Z_MAX_POS 300 /** * Software Endstops @@ -1387,7 +1390,7 @@ */ //#define AUTO_BED_LEVELING_3POINT //#define AUTO_BED_LEVELING_LINEAR -//#define AUTO_BED_LEVELING_BILINEAR +#define AUTO_BED_LEVELING_BILINEAR //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING @@ -1587,7 +1590,7 @@ // - Move the Z probe (or nozzle) to a defined XY point before Z Homing. // - Prevent Z homing when the Z probe is outside bed area. // -//#define Z_SAFE_HOMING +#define Z_SAFE_HOMING #if ENABLED(Z_SAFE_HOMING) #define Z_SAFE_HOMING_X_POINT X_CENTER // X point for Z homing @@ -1672,7 +1675,7 @@ * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) */ -//#define EEPROM_SETTINGS // Persistent storage with M500 and M501 +#define EEPROM_SETTINGS // Persistent storage with M500 and M501 //#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. #define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load @@ -1706,16 +1709,16 @@ // Preheat Constants - Up to 5 are supported without changes // #define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 180 -#define PREHEAT_1_TEMP_BED 70 +#define PREHEAT_1_TEMP_HOTEND 200 +#define PREHEAT_1_TEMP_BED 50 #define PREHEAT_1_TEMP_CHAMBER 35 -#define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 +#define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 -#define PREHEAT_2_LABEL "ABS" -#define PREHEAT_2_TEMP_HOTEND 240 -#define PREHEAT_2_TEMP_BED 110 +#define PREHEAT_2_LABEL "PETG" +#define PREHEAT_2_TEMP_HOTEND 220 +#define PREHEAT_2_TEMP_BED 80 #define PREHEAT_2_TEMP_CHAMBER 35 -#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 +#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 /** * Nozzle Park @@ -1921,7 +1924,7 @@ * * :['JAPANESE', 'WESTERN', 'CYRILLIC'] */ -#define DISPLAY_CHARSET_HD44780 JAPANESE +#define DISPLAY_CHARSET_HD44780 WESTERN /** * Info Screen Style (0:Classic, 1:Průša) @@ -1936,7 +1939,7 @@ * SD Card support is disabled by default. If your controller has an SD slot, * you must uncomment the following option or it won't work. */ -//#define SDSUPPORT +#define SDSUPPORT /** * SD CARD: ENABLE CRC @@ -2014,7 +2017,7 @@ // If you have a speaker that can produce tones, enable it here. // By default Marlin assumes you have a buzzer with a fixed frequency. // -//#define SPEAKER +#define SPEAKER // // The duration and frequency for the UI feedback sound. @@ -2287,7 +2290,7 @@ // This is RAMPS-compatible using a single 10-pin connector. // (For CR-10 owners who want to replace the Melzi Creality board but retain the display) // -//#define CR10_STOCKDISPLAY +#define CR10_STOCKDISPLAY // // Ender-2 OEM display, a variant of the MKS_MINI_12864 diff --git a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR E3 Turbo with BLTouch/Configuration_adv.h b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR E3 Turbo with BLTouch/Configuration_adv.h index 5335fa012a..eeaf39dcba 100644 --- a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR E3 Turbo with BLTouch/Configuration_adv.h +++ b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR E3 Turbo with BLTouch/Configuration_adv.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Creality/Ender-5 Pro/BigTreeTech SKR E3 Turbo with BLTouch" + /** * Configuration_adv.h * @@ -741,7 +743,7 @@ //#define HOMING_BACKOFF_POST_MM { 2, 2, 2 } // (mm) Backoff from endstops after homing -//#define QUICK_HOME // If G28 contains XY do a diagonal move first +#define QUICK_HOME // If G28 contains XY do a diagonal move first //#define HOME_Y_BEFORE_X // If G28 contains XY home Y before X //#define HOME_Z_FIRST // Home Z first. Requires a Z-MIN endstop (not a probe). //#define CODEPENDENT_XY_HOMING // If X/Y can't home without homing Y/X first @@ -792,7 +794,7 @@ * differs, a mode set eeprom write will be completed at initialization. * Use the option below to force an eeprom write to a V3.1 probe regardless. */ - //#define BLTOUCH_SET_5V_MODE + #define BLTOUCH_SET_5V_MODE /** * Safety: Activate if connecting a probe with an unknown voltage mode. @@ -826,7 +828,7 @@ // Define probe X and Y positions for Z1, Z2 [, Z3 [, Z4]] // If not defined, probe limits will be used. // Override with 'M422 S X Y' - //#define Z_STEPPER_ALIGN_XY { { 10, 190 }, { 100, 10 }, { 190, 190 } } + //#define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } /** * Orientation for the automatically-calculated probe positions. @@ -867,7 +869,7 @@ // On a 300mm bed a 5% grade would give a misalignment of ~1.5cm #define G34_MAX_GRADE 5 // (%) Maximum incline that G34 will handle - #define Z_STEPPER_ALIGN_ITERATIONS 5 // Number of iterations to apply during alignment + #define Z_STEPPER_ALIGN_ITERATIONS 3 // Number of iterations to apply during alignment #define Z_STEPPER_ALIGN_ACC 0.02 // Stop iterating early if the accuracy is better than this #define RESTORE_LEVELING_AFTER_G34 // Restore leveling after G34 is done? // After G34, re-home Z (G28 Z) or just calculate it from the last probe heights? @@ -1135,7 +1137,7 @@ #if EITHER(IS_ULTIPANEL, EXTENSIBLE_UI) #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel - #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines + #define SHORT_MANUAL_Z_MOVE 0.025 // (mm) Smallest manual Z move (< 0.1mm) #if IS_ULTIPANEL #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position" #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen @@ -1175,7 +1177,7 @@ #endif // Include a page of printer information in the LCD Main Menu - //#define LCD_INFO_MENU + #define LCD_INFO_MENU #if ENABLED(LCD_INFO_MENU) //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages #endif @@ -1229,7 +1231,7 @@ #endif // Scroll a longer status message into view - //#define STATUS_MESSAGE_SCROLLING + #define STATUS_MESSAGE_SCROLLING // On the Info Screen, display XY with one decimal place when possible //#define LCD_DECIMAL_SMALL_XY @@ -1384,7 +1386,7 @@ //#define LONG_FILENAME_HOST_SUPPORT // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES + #define SCROLL_LONG_FILENAMES // Leave the heaters on after Stop Print (not recommended!) //#define SD_ABORT_NO_COOLDOWN @@ -1790,7 +1792,7 @@ * * Warning: Does not respect endstops! */ -//#define BABYSTEPPING +#define BABYSTEPPING #if ENABLED(BABYSTEPPING) //#define INTEGRATED_BABYSTEPPING // EXPERIMENTAL integration of babystepping into the Stepper ISR //#define BABYSTEP_WITHOUT_HOMING @@ -1801,7 +1803,7 @@ #define BABYSTEP_MULTIPLICATOR_Z 1 // (steps or mm) Steps or millimeter distance for each Z babystep #define BABYSTEP_MULTIPLICATOR_XY 1 // (steps or mm) Steps or millimeter distance for each XY babystep - //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. + #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. // Note: Extra time may be added to mitigate controller latency. @@ -2493,7 +2495,7 @@ #define INTERPOLATE true #if AXIS_IS_TMC(X) - #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. + #define X_CURRENT 580 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for sensorless homing #define X_MICROSTEPS 16 // 0..256 #define X_RSENSE 0.11 @@ -2511,7 +2513,7 @@ #endif #if AXIS_IS_TMC(Y) - #define Y_CURRENT 800 + #define Y_CURRENT 650 #define Y_CURRENT_HOME Y_CURRENT #define Y_MICROSTEPS 16 #define Y_RSENSE 0.11 @@ -2529,7 +2531,7 @@ #endif #if AXIS_IS_TMC(Z) - #define Z_CURRENT 800 + #define Z_CURRENT 580 #define Z_CURRENT_HOME Z_CURRENT #define Z_MICROSTEPS 16 #define Z_RSENSE 0.11 @@ -2565,7 +2567,7 @@ #endif #if AXIS_IS_TMC(E0) - #define E0_CURRENT 800 + #define E0_CURRENT 650 #define E0_MICROSTEPS 16 #define E0_RSENSE 0.11 #define E0_CHAIN_POS -1 @@ -2719,7 +2721,7 @@ * Define your own with: * { , , hysteresis_start[1..8] } */ - #define CHOPPER_TIMING CHOPPER_DEFAULT_12V // All axes (override below) + #define CHOPPER_TIMING CHOPPER_DEFAULT_24V // All axes (override below) //#define CHOPPER_TIMING_X CHOPPER_TIMING // For X Axes (override below) //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X //#define CHOPPER_TIMING_Y CHOPPER_TIMING // For Y Axes (override below) diff --git a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR E3 Turbo/Configuration.h b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR E3 Turbo/Configuration.h index 78c2dc9160..2cae32b491 100644 --- a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR E3 Turbo/Configuration.h +++ b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR E3 Turbo/Configuration.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Creality/Ender-5 Pro/BigTreeTech SKR E3 Turbo" + /** * Configuration.h * @@ -69,7 +71,7 @@ // @section info // Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes. +#define STRING_CONFIG_H_AUTHOR "(lpla, Ender-5-Pro)" // Who made the changes. //#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) /** @@ -102,14 +104,14 @@ * * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] */ -#define SERIAL_PORT 0 +#define SERIAL_PORT -1 /** * Select a secondary serial port on the board to use for communication with the host. * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] */ -//#define SERIAL_PORT_2 -1 +#define SERIAL_PORT_2 0 /** * Select a third serial port on the board to use for communication with the host. @@ -127,18 +129,18 @@ * * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ -#define BAUDRATE 250000 +#define BAUDRATE 115200 // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH // Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_RAMPS_14_EFB + #define MOTHERBOARD BOARD_BTT_SKR_E3_TURBO #endif // Name displayed in the LCD "Ready" message and Info menu -//#define CUSTOM_MACHINE_NAME "3D Printer" +#define CUSTOM_MACHINE_NAME "Ender-5 Pro" // Printer's unique ID, used by some programs to differentiate between machines. // Choose your own or use a service like https://www.uuidgenerator.net/version4 @@ -424,7 +426,7 @@ #define TEMP_SENSOR_5 0 #define TEMP_SENSOR_6 0 #define TEMP_SENSOR_7 0 -#define TEMP_SENSOR_BED 0 +#define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 #define TEMP_SENSOR_COOLER 0 @@ -480,7 +482,7 @@ #define HEATER_5_MAXTEMP 275 #define HEATER_6_MAXTEMP 275 #define HEATER_7_MAXTEMP 275 -#define BED_MAXTEMP 150 +#define BED_MAXTEMP 125 #define CHAMBER_MAXTEMP 60 /** @@ -505,21 +507,22 @@ #define PID_K1 0.95 // Smoothing factor within any PID loop #if ENABLED(PIDTEMP) - //#define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) - //#define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) + #define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) + #define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) // Set/get with gcode: M301 E[extruder number, 0-2] + // Creality Ender-5 Pro #if ENABLED(PID_PARAMS_PER_HOTEND) // Specify between 1 and HOTENDS values per array. // If fewer than EXTRUDER values are provided, the last element will be repeated. - #define DEFAULT_Kp_LIST { 22.20, 22.20 } - #define DEFAULT_Ki_LIST { 1.08, 1.08 } - #define DEFAULT_Kd_LIST { 114.00, 114.00 } + #define DEFAULT_Kp_LIST { 21.73, 21.73 } + #define DEFAULT_Ki_LIST { 1.54, 1.54 } + #define DEFAULT_Kd_LIST { 76.55, 76.55 } #else - #define DEFAULT_Kp 22.20 - #define DEFAULT_Ki 1.08 - #define DEFAULT_Kd 114.00 + #define DEFAULT_Kp 21.73 + #define DEFAULT_Ki 1.54 + #define DEFAULT_Kd 76.55 #endif #endif // PIDTEMP @@ -683,11 +686,11 @@ // Specify here all the endstop connectors that are connected to any endstop or probe. // Almost all printers will be using one per axis. Probes will use one or more of the // extra connectors. Leave undefined any used for non-endstop and non-probe purposes. -#define USE_XMIN_PLUG -#define USE_YMIN_PLUG +//#define USE_XMIN_PLUG +//#define USE_YMIN_PLUG #define USE_ZMIN_PLUG -//#define USE_XMAX_PLUG -//#define USE_YMAX_PLUG +#define USE_XMAX_PLUG +#define USE_YMAX_PLUG //#define USE_ZMAX_PLUG // Enable pullup for all endstops to prevent a floating state @@ -743,15 +746,15 @@ * TMC5130, TMC5130_STANDALONE, TMC5160, TMC5160_STANDALONE * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'L6474', 'POWERSTEP01', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2160', 'TMC2160_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC2209', 'TMC2209_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE', 'TMC5160', 'TMC5160_STANDALONE'] */ -#define X_DRIVER_TYPE A4988 -#define Y_DRIVER_TYPE A4988 -#define Z_DRIVER_TYPE A4988 +#define X_DRIVER_TYPE TMC2209 +#define Y_DRIVER_TYPE TMC2209 +#define Z_DRIVER_TYPE TMC2209 //#define X2_DRIVER_TYPE A4988 //#define Y2_DRIVER_TYPE A4988 //#define Z2_DRIVER_TYPE A4988 //#define Z3_DRIVER_TYPE A4988 //#define Z4_DRIVER_TYPE A4988 -#define E0_DRIVER_TYPE A4988 +#define E0_DRIVER_TYPE TMC2209 //#define E1_DRIVER_TYPE A4988 //#define E2_DRIVER_TYPE A4988 //#define E3_DRIVER_TYPE A4988 @@ -806,14 +809,14 @@ * Override with M92 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 500 } +#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 800, 93 } /** * Default Max Feed Rate (mm/s) * Override with M203 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 } +#define DEFAULT_MAX_FEEDRATE { 500, 500, 5, 25 } //#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 #if ENABLED(LIMITED_MAX_FR_EDITING) @@ -826,7 +829,7 @@ * Override with M201 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 } +#define DEFAULT_MAX_ACCELERATION { 500, 500, 100, 5000 } //#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 #if ENABLED(LIMITED_MAX_ACCEL_EDITING) @@ -841,9 +844,9 @@ * M204 R Retract Acceleration * M204 T Travel Acceleration */ -#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves +#define DEFAULT_ACCELERATION 500 // X, Y, Z and E acceleration for printing moves +#define DEFAULT_RETRACT_ACCELERATION 500 // E acceleration for retracts +#define DEFAULT_TRAVEL_ACCELERATION 500 // X, Y, Z acceleration for travel (non printing) moves /** * Default Jerk limits (mm/s) @@ -877,7 +880,7 @@ * https://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html */ #if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.013 // (mm) Distance from real junction edge + #define JUNCTION_DEVIATION_MM 0.08 // (mm) Distance from real junction edge #define JD_HANDLE_SMALL_SEGMENTS // Use curvature estimation instead of just the junction angle // for small segments (< 1mm) with large junction angles (> 135°). #endif @@ -1055,7 +1058,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +#define NOZZLE_TO_PROBE_OFFSET { -40, -10, -1.85 } // Most probes should stay away from the edges of the bed, but // with NOZZLE_AS_PROBE this can be negative for a wider probing area. @@ -1190,14 +1193,14 @@ // @section machine // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR false +#define INVERT_X_DIR true #define INVERT_Y_DIR true -#define INVERT_Z_DIR false +#define INVERT_Z_DIR true // @section extruder // For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR false +#define INVERT_E0_DIR true #define INVERT_E1_DIR false #define INVERT_E2_DIR false #define INVERT_E3_DIR false @@ -1225,15 +1228,15 @@ // Direction of endstops when homing; 1=MAX, -1=MIN // :[-1,1] -#define X_HOME_DIR -1 -#define Y_HOME_DIR -1 +#define X_HOME_DIR 1 +#define Y_HOME_DIR 1 #define Z_HOME_DIR -1 // @section machine // The size of the printable area -#define X_BED_SIZE 200 -#define Y_BED_SIZE 200 +#define X_BED_SIZE 220 +#define Y_BED_SIZE 220 // Travel limits (mm) after homing, corresponding to endstop positions. #define X_MIN_POS 0 @@ -1241,7 +1244,7 @@ #define Z_MIN_POS 0 #define X_MAX_POS X_BED_SIZE #define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 200 +#define Z_MAX_POS 300 /** * Software Endstops @@ -1587,7 +1590,7 @@ // - Move the Z probe (or nozzle) to a defined XY point before Z Homing. // - Prevent Z homing when the Z probe is outside bed area. // -//#define Z_SAFE_HOMING +#define Z_SAFE_HOMING #if ENABLED(Z_SAFE_HOMING) #define Z_SAFE_HOMING_X_POINT X_CENTER // X point for Z homing @@ -1672,7 +1675,7 @@ * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) */ -//#define EEPROM_SETTINGS // Persistent storage with M500 and M501 +#define EEPROM_SETTINGS // Persistent storage with M500 and M501 //#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. #define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load @@ -1706,16 +1709,16 @@ // Preheat Constants - Up to 5 are supported without changes // #define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 180 -#define PREHEAT_1_TEMP_BED 70 +#define PREHEAT_1_TEMP_HOTEND 200 +#define PREHEAT_1_TEMP_BED 50 #define PREHEAT_1_TEMP_CHAMBER 35 -#define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 +#define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 -#define PREHEAT_2_LABEL "ABS" -#define PREHEAT_2_TEMP_HOTEND 240 -#define PREHEAT_2_TEMP_BED 110 +#define PREHEAT_2_LABEL "PETG" +#define PREHEAT_2_TEMP_HOTEND 220 +#define PREHEAT_2_TEMP_BED 80 #define PREHEAT_2_TEMP_CHAMBER 35 -#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 +#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 /** * Nozzle Park @@ -1921,7 +1924,7 @@ * * :['JAPANESE', 'WESTERN', 'CYRILLIC'] */ -#define DISPLAY_CHARSET_HD44780 JAPANESE +#define DISPLAY_CHARSET_HD44780 WESTERN /** * Info Screen Style (0:Classic, 1:Průša) @@ -1936,7 +1939,7 @@ * SD Card support is disabled by default. If your controller has an SD slot, * you must uncomment the following option or it won't work. */ -//#define SDSUPPORT +#define SDSUPPORT /** * SD CARD: ENABLE CRC @@ -2014,7 +2017,7 @@ // If you have a speaker that can produce tones, enable it here. // By default Marlin assumes you have a buzzer with a fixed frequency. // -//#define SPEAKER +#define SPEAKER // // The duration and frequency for the UI feedback sound. @@ -2287,7 +2290,7 @@ // This is RAMPS-compatible using a single 10-pin connector. // (For CR-10 owners who want to replace the Melzi Creality board but retain the display) // -//#define CR10_STOCKDISPLAY +#define CR10_STOCKDISPLAY // // Ender-2 OEM display, a variant of the MKS_MINI_12864 diff --git a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR E3 Turbo/Configuration_adv.h b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR E3 Turbo/Configuration_adv.h index 5335fa012a..8ca403ec6a 100644 --- a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR E3 Turbo/Configuration_adv.h +++ b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR E3 Turbo/Configuration_adv.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Creality/Ender-5 Pro/BigTreeTech SKR E3 Turbo" + /** * Configuration_adv.h * @@ -741,7 +743,7 @@ //#define HOMING_BACKOFF_POST_MM { 2, 2, 2 } // (mm) Backoff from endstops after homing -//#define QUICK_HOME // If G28 contains XY do a diagonal move first +#define QUICK_HOME // If G28 contains XY do a diagonal move first //#define HOME_Y_BEFORE_X // If G28 contains XY home Y before X //#define HOME_Z_FIRST // Home Z first. Requires a Z-MIN endstop (not a probe). //#define CODEPENDENT_XY_HOMING // If X/Y can't home without homing Y/X first @@ -826,7 +828,7 @@ // Define probe X and Y positions for Z1, Z2 [, Z3 [, Z4]] // If not defined, probe limits will be used. // Override with 'M422 S X Y' - //#define Z_STEPPER_ALIGN_XY { { 10, 190 }, { 100, 10 }, { 190, 190 } } + //#define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } /** * Orientation for the automatically-calculated probe positions. @@ -867,7 +869,7 @@ // On a 300mm bed a 5% grade would give a misalignment of ~1.5cm #define G34_MAX_GRADE 5 // (%) Maximum incline that G34 will handle - #define Z_STEPPER_ALIGN_ITERATIONS 5 // Number of iterations to apply during alignment + #define Z_STEPPER_ALIGN_ITERATIONS 3 // Number of iterations to apply during alignment #define Z_STEPPER_ALIGN_ACC 0.02 // Stop iterating early if the accuracy is better than this #define RESTORE_LEVELING_AFTER_G34 // Restore leveling after G34 is done? // After G34, re-home Z (G28 Z) or just calculate it from the last probe heights? @@ -1135,7 +1137,7 @@ #if EITHER(IS_ULTIPANEL, EXTENSIBLE_UI) #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel - #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines + #define SHORT_MANUAL_Z_MOVE 0.025 // (mm) Smallest manual Z move (< 0.1mm) #if IS_ULTIPANEL #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position" #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen @@ -1175,7 +1177,7 @@ #endif // Include a page of printer information in the LCD Main Menu - //#define LCD_INFO_MENU + #define LCD_INFO_MENU #if ENABLED(LCD_INFO_MENU) //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages #endif @@ -1229,7 +1231,7 @@ #endif // Scroll a longer status message into view - //#define STATUS_MESSAGE_SCROLLING + #define STATUS_MESSAGE_SCROLLING // On the Info Screen, display XY with one decimal place when possible //#define LCD_DECIMAL_SMALL_XY @@ -1384,7 +1386,7 @@ //#define LONG_FILENAME_HOST_SUPPORT // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES + #define SCROLL_LONG_FILENAMES // Leave the heaters on after Stop Print (not recommended!) //#define SD_ABORT_NO_COOLDOWN @@ -1801,7 +1803,7 @@ #define BABYSTEP_MULTIPLICATOR_Z 1 // (steps or mm) Steps or millimeter distance for each Z babystep #define BABYSTEP_MULTIPLICATOR_XY 1 // (steps or mm) Steps or millimeter distance for each XY babystep - //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. + #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. // Note: Extra time may be added to mitigate controller latency. @@ -2493,7 +2495,7 @@ #define INTERPOLATE true #if AXIS_IS_TMC(X) - #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. + #define X_CURRENT 580 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for sensorless homing #define X_MICROSTEPS 16 // 0..256 #define X_RSENSE 0.11 @@ -2511,7 +2513,7 @@ #endif #if AXIS_IS_TMC(Y) - #define Y_CURRENT 800 + #define Y_CURRENT 650 #define Y_CURRENT_HOME Y_CURRENT #define Y_MICROSTEPS 16 #define Y_RSENSE 0.11 @@ -2529,7 +2531,7 @@ #endif #if AXIS_IS_TMC(Z) - #define Z_CURRENT 800 + #define Z_CURRENT 580 #define Z_CURRENT_HOME Z_CURRENT #define Z_MICROSTEPS 16 #define Z_RSENSE 0.11 @@ -2565,7 +2567,7 @@ #endif #if AXIS_IS_TMC(E0) - #define E0_CURRENT 800 + #define E0_CURRENT 650 #define E0_MICROSTEPS 16 #define E0_RSENSE 0.11 #define E0_CHAIN_POS -1 @@ -2719,7 +2721,7 @@ * Define your own with: * { , , hysteresis_start[1..8] } */ - #define CHOPPER_TIMING CHOPPER_DEFAULT_12V // All axes (override below) + #define CHOPPER_TIMING CHOPPER_DEFAULT_24V // All axes (override below) //#define CHOPPER_TIMING_X CHOPPER_TIMING // For X Axes (override below) //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X //#define CHOPPER_TIMING_Y CHOPPER_TIMING // For Y Axes (override below) diff --git a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 1.2/Configuration.h b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 1.2/Configuration.h index 78c2dc9160..a0905e88c1 100644 --- a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 1.2/Configuration.h +++ b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 1.2/Configuration.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 1.2" + /** * Configuration.h * @@ -69,7 +71,7 @@ // @section info // Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes. +#define STRING_CONFIG_H_AUTHOR "(Choppman, Ender-5-SKR-mini-E3-V1.2)" // Who made the changes. //#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) /** @@ -87,10 +89,10 @@ #define SHOW_BOOTSCREEN // Show the bitmap in Marlin/_Bootscreen.h on startup. -//#define SHOW_CUSTOM_BOOTSCREEN +#define SHOW_CUSTOM_BOOTSCREEN // Show the bitmap in Marlin/_Statusscreen.h on the status screen. -//#define CUSTOM_STATUS_SCREEN_IMAGE +#define CUSTOM_STATUS_SCREEN_IMAGE // @section machine @@ -102,14 +104,14 @@ * * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] */ -#define SERIAL_PORT 0 +#define SERIAL_PORT -1 /** * Select a secondary serial port on the board to use for communication with the host. * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] */ -//#define SERIAL_PORT_2 -1 +#define SERIAL_PORT_2 2 /** * Select a third serial port on the board to use for communication with the host. @@ -127,18 +129,18 @@ * * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ -#define BAUDRATE 250000 +#define BAUDRATE 115200 // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH // Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_RAMPS_14_EFB + #define MOTHERBOARD BOARD_BTT_SKR_MINI_E3_V1_2 #endif // Name displayed in the LCD "Ready" message and Info menu -//#define CUSTOM_MACHINE_NAME "3D Printer" +#define CUSTOM_MACHINE_NAME "Ender-5 Pro" // Printer's unique ID, used by some programs to differentiate between machines. // Choose your own or use a service like https://www.uuidgenerator.net/version4 @@ -424,7 +426,7 @@ #define TEMP_SENSOR_5 0 #define TEMP_SENSOR_6 0 #define TEMP_SENSOR_7 0 -#define TEMP_SENSOR_BED 0 +#define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 #define TEMP_SENSOR_COOLER 0 @@ -472,7 +474,7 @@ // Above this temperature the heater will be switched off. // This can protect components from overheating, but NOT from shorts and failures. // (Use MINTEMP for thermistor short/failure protection.) -#define HEATER_0_MAXTEMP 275 +#define HEATER_0_MAXTEMP 260 #define HEATER_1_MAXTEMP 275 #define HEATER_2_MAXTEMP 275 #define HEATER_3_MAXTEMP 275 @@ -480,7 +482,7 @@ #define HEATER_5_MAXTEMP 275 #define HEATER_6_MAXTEMP 275 #define HEATER_7_MAXTEMP 275 -#define BED_MAXTEMP 150 +#define BED_MAXTEMP 100 #define CHAMBER_MAXTEMP 60 /** @@ -505,21 +507,22 @@ #define PID_K1 0.95 // Smoothing factor within any PID loop #if ENABLED(PIDTEMP) - //#define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) - //#define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) + #define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) + #define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) // Set/get with gcode: M301 E[extruder number, 0-2] + // Creality Ender-5 #if ENABLED(PID_PARAMS_PER_HOTEND) // Specify between 1 and HOTENDS values per array. // If fewer than EXTRUDER values are provided, the last element will be repeated. - #define DEFAULT_Kp_LIST { 22.20, 22.20 } - #define DEFAULT_Ki_LIST { 1.08, 1.08 } - #define DEFAULT_Kd_LIST { 114.00, 114.00 } + #define DEFAULT_Kp_LIST { 21.73, 21.73 } + #define DEFAULT_Ki_LIST { 1.54, 1.54 } + #define DEFAULT_Kd_LIST { 76.55, 76.55 } #else - #define DEFAULT_Kp 22.20 - #define DEFAULT_Ki 1.08 - #define DEFAULT_Kd 114.00 + #define DEFAULT_Kp 21.73 + #define DEFAULT_Ki 1.54 + #define DEFAULT_Kd 76.55 #endif #endif // PIDTEMP @@ -540,7 +543,7 @@ * heater. If your configuration is significantly different than this and you don't understand * the issues involved, don't use bed PID until someone else verifies that your hardware works. */ -//#define PIDTEMPBED +#define PIDTEMPBED //#define BED_LIMIT_SWITCHING @@ -556,11 +559,9 @@ //#define MIN_BED_POWER 0 //#define PID_BED_DEBUG // Sends debug data to the serial port. - // 120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - // from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) - #define DEFAULT_bedKp 10.00 - #define DEFAULT_bedKi .023 - #define DEFAULT_bedKd 305.4 + #define DEFAULT_bedKp 50.71 + #define DEFAULT_bedKi 9.88 + #define DEFAULT_bedKd 173.43 // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. #endif // PIDTEMPBED @@ -627,14 +628,14 @@ * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** */ #define PREVENT_COLD_EXTRUSION -#define EXTRUDE_MINTEMP 170 +#define EXTRUDE_MINTEMP 185 /** * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. * Note: For Bowden Extruders make this large enough to allow load/unload. */ #define PREVENT_LENGTHY_EXTRUDE -#define EXTRUDE_MAXLENGTH 200 +#define EXTRUDE_MAXLENGTH 600 //=========================================================================== //======================== Thermal Runaway Protection ======================= @@ -683,11 +684,11 @@ // Specify here all the endstop connectors that are connected to any endstop or probe. // Almost all printers will be using one per axis. Probes will use one or more of the // extra connectors. Leave undefined any used for non-endstop and non-probe purposes. -#define USE_XMIN_PLUG -#define USE_YMIN_PLUG +//#define USE_XMIN_PLUG +//#define USE_YMIN_PLUG #define USE_ZMIN_PLUG -//#define USE_XMAX_PLUG -//#define USE_YMAX_PLUG +#define USE_XMAX_PLUG +#define USE_YMAX_PLUG //#define USE_ZMAX_PLUG // Enable pullup for all endstops to prevent a floating state @@ -743,15 +744,15 @@ * TMC5130, TMC5130_STANDALONE, TMC5160, TMC5160_STANDALONE * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'L6474', 'POWERSTEP01', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2160', 'TMC2160_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC2209', 'TMC2209_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE', 'TMC5160', 'TMC5160_STANDALONE'] */ -#define X_DRIVER_TYPE A4988 -#define Y_DRIVER_TYPE A4988 -#define Z_DRIVER_TYPE A4988 +#define X_DRIVER_TYPE TMC2209 +#define Y_DRIVER_TYPE TMC2209 +#define Z_DRIVER_TYPE TMC2209 //#define X2_DRIVER_TYPE A4988 //#define Y2_DRIVER_TYPE A4988 //#define Z2_DRIVER_TYPE A4988 //#define Z3_DRIVER_TYPE A4988 //#define Z4_DRIVER_TYPE A4988 -#define E0_DRIVER_TYPE A4988 +#define E0_DRIVER_TYPE TMC2209 //#define E1_DRIVER_TYPE A4988 //#define E2_DRIVER_TYPE A4988 //#define E3_DRIVER_TYPE A4988 @@ -806,14 +807,14 @@ * Override with M92 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 500 } +#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 800, 93 } /** * Default Max Feed Rate (mm/s) * Override with M203 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 } +#define DEFAULT_MAX_FEEDRATE { 500, 500, 5, 25 } //#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 #if ENABLED(LIMITED_MAX_FR_EDITING) @@ -826,7 +827,7 @@ * Override with M201 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 } +#define DEFAULT_MAX_ACCELERATION { 500, 500, 100, 5000 } //#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 #if ENABLED(LIMITED_MAX_ACCEL_EDITING) @@ -841,9 +842,9 @@ * M204 R Retract Acceleration * M204 T Travel Acceleration */ -#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves +#define DEFAULT_ACCELERATION 500 // X, Y, Z and E acceleration for printing moves +#define DEFAULT_RETRACT_ACCELERATION 500 // E acceleration for retracts +#define DEFAULT_TRAVEL_ACCELERATION 500 // X, Y, Z acceleration for travel (non printing) moves /** * Default Jerk limits (mm/s) @@ -877,7 +878,7 @@ * https://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html */ #if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.013 // (mm) Distance from real junction edge + #define JUNCTION_DEVIATION_MM 0.08 // (mm) Distance from real junction edge #define JD_HANDLE_SMALL_SEGMENTS // Use curvature estimation instead of just the junction angle // for small segments (< 1mm) with large junction angles (> 135°). #endif @@ -1185,19 +1186,19 @@ // @section extruder #define DISABLE_E false // Disable the extruder when not stepping -#define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled +//#define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled // @section machine // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR false +#define INVERT_X_DIR true #define INVERT_Y_DIR true -#define INVERT_Z_DIR false +#define INVERT_Z_DIR true // @section extruder // For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR false +#define INVERT_E0_DIR true #define INVERT_E1_DIR false #define INVERT_E2_DIR false #define INVERT_E3_DIR false @@ -1218,22 +1219,22 @@ */ //#define Z_IDLE_HEIGHT Z_HOME_POS -//#define Z_HOMING_HEIGHT 4 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ... +#define Z_HOMING_HEIGHT 4 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ... // Be sure to have this much clearance over your Z_MAX_POS to prevent grinding. -//#define Z_AFTER_HOMING 10 // (mm) Height to move to after homing Z +#define Z_AFTER_HOMING 10 // (mm) Height to move to after homing Z // Direction of endstops when homing; 1=MAX, -1=MIN // :[-1,1] -#define X_HOME_DIR -1 -#define Y_HOME_DIR -1 +#define X_HOME_DIR 1 +#define Y_HOME_DIR 1 #define Z_HOME_DIR -1 // @section machine // The size of the printable area -#define X_BED_SIZE 200 -#define Y_BED_SIZE 200 +#define X_BED_SIZE 220 +#define Y_BED_SIZE 220 // Travel limits (mm) after homing, corresponding to endstop positions. #define X_MIN_POS 0 @@ -1241,7 +1242,7 @@ #define Z_MIN_POS 0 #define X_MAX_POS X_BED_SIZE #define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 200 +#define Z_MAX_POS 300 /** * Software Endstops @@ -1337,7 +1338,7 @@ // After a runout is detected, continue printing this length of filament // before executing the runout script. Useful for a sensor at the end of // a feed tube. Requires 4 bytes SRAM per sensor, plus 4 bytes overhead. - //#define FILAMENT_RUNOUT_DISTANCE_MM 25 + //#define FILAMENT_RUNOUT_DISTANCE_MM 7 #ifdef FILAMENT_RUNOUT_DISTANCE_MM // Enable this option to use an encoder disc that toggles the runout pin @@ -1389,14 +1390,14 @@ //#define AUTO_BED_LEVELING_LINEAR //#define AUTO_BED_LEVELING_BILINEAR //#define AUTO_BED_LEVELING_UBL -//#define MESH_BED_LEVELING +#define MESH_BED_LEVELING /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable * leveling immediately after G28. */ -//#define RESTORE_LEVELING_AFTER_G28 +#define RESTORE_LEVELING_AFTER_G28 //#define ENABLE_LEVELING_AFTER_G28 /** @@ -1425,9 +1426,6 @@ // at which point movement will be level to the machine's XY plane. // The height can be set with M420 Z #define ENABLE_LEVELING_FADE_HEIGHT - #if ENABLED(ENABLE_LEVELING_FADE_HEIGHT) - #define DEFAULT_LEVELING_FADE_HEIGHT 10.0 // (mm) Default fade height. - #endif // For Cartesian machines, instead of dividing moves on mesh boundaries, // split up moves into short segments like a Delta. This follows the @@ -1464,7 +1462,7 @@ // Beyond the probed grid, continue the implied tilt? // Default is to maintain the height of the nearest edge. - //#define EXTRAPOLATE_BEYOND_GRID + #define EXTRAPOLATE_BEYOND_GRID // // Experimental Subdivision of the grid by Catmull-Rom method. @@ -1518,47 +1516,22 @@ * Add a bed leveling sub-menu for ABL or MBL. * Include a guided procedure if manual probing is enabled. */ -//#define LCD_BED_LEVELING +#define LCD_BED_LEVELING #if ENABLED(LCD_BED_LEVELING) #define MESH_EDIT_Z_STEP 0.025 // (mm) Step size while manually probing Z axis. #define LCD_PROBE_Z_RANGE 4 // (mm) Z Range centered on Z_MIN_POS for LCD Z adjustment - //#define MESH_EDIT_MENU // Add a menu to edit mesh points + #define MESH_EDIT_MENU // Add a menu to edit mesh points #endif // Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS +#define LEVEL_BED_CORNERS #if ENABLED(LEVEL_BED_CORNERS) #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner - //#define LEVEL_CORNERS_USE_PROBE - #if ENABLED(LEVEL_CORNERS_USE_PROBE) - #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 - #define LEVEL_CORNERS_VERIFY_RAISED // After adjustment triggers the probe, re-probe to verify - //#define LEVEL_CORNERS_AUDIO_FEEDBACK - #endif - - /** - * Corner Leveling Order - * - * Set 2 or 4 points. When 2 points are given, the 3rd is the center of the opposite edge. - * - * LF Left-Front RF Right-Front - * LB Left-Back RB Right-Back - * - * Examples: - * - * Default {LF,RB,LB,RF} {LF,RF} {LB,LF} - * LB --------- RB LB --------- RB LB --------- RB LB --------- RB - * | 4 3 | | 3 2 | | <3> | | 1 | - * | | | | | | | <3>| - * | 1 2 | | 1 4 | | 1 2 | | 2 | - * LF --------- RF LF --------- RF LF --------- RF LF --------- RF - */ - #define LEVEL_CORNERS_LEVELING_ORDER { LF, RF, RB, LB } + #define LEVEL_CENTER_TOO // Move to the center after the last corner #endif /** @@ -1672,12 +1645,12 @@ * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) */ -//#define EEPROM_SETTINGS // Persistent storage with M500 and M501 +#define EEPROM_SETTINGS // Persistent storage with M500 and M501 //#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. #define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load #if ENABLED(EEPROM_SETTINGS) - //#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. + #define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. #endif // @@ -1706,16 +1679,16 @@ // Preheat Constants - Up to 5 are supported without changes // #define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 180 -#define PREHEAT_1_TEMP_BED 70 +#define PREHEAT_1_TEMP_HOTEND 200 +#define PREHEAT_1_TEMP_BED 60 #define PREHEAT_1_TEMP_CHAMBER 35 -#define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 +#define PREHEAT_1_FAN_SPEED 255 // Value from 0 to 255 -#define PREHEAT_2_LABEL "ABS" -#define PREHEAT_2_TEMP_HOTEND 240 -#define PREHEAT_2_TEMP_BED 110 +#define PREHEAT_2_LABEL "PETG" +#define PREHEAT_2_TEMP_HOTEND 230 +#define PREHEAT_2_TEMP_BED 80 #define PREHEAT_2_TEMP_CHAMBER 35 -#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 +#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 /** * Nozzle Park @@ -1728,7 +1701,7 @@ * P1 Raise the nozzle always to Z-park height. * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. */ -//#define NOZZLE_PARK_FEATURE +#define NOZZLE_PARK_FEATURE #if ENABLED(NOZZLE_PARK_FEATURE) // Specify a park position as { X, Y, Z_raise } @@ -1921,7 +1894,7 @@ * * :['JAPANESE', 'WESTERN', 'CYRILLIC'] */ -#define DISPLAY_CHARSET_HD44780 JAPANESE +#define DISPLAY_CHARSET_HD44780 WESTERN /** * Info Screen Style (0:Classic, 1:Průša) @@ -1936,7 +1909,7 @@ * SD Card support is disabled by default. If your controller has an SD slot, * you must uncomment the following option or it won't work. */ -//#define SDSUPPORT +#define SDSUPPORT /** * SD CARD: ENABLE CRC @@ -2287,7 +2260,7 @@ // This is RAMPS-compatible using a single 10-pin connector. // (For CR-10 owners who want to replace the Melzi Creality board but retain the display) // -//#define CR10_STOCKDISPLAY +#define CR10_STOCKDISPLAY // // Ender-2 OEM display, a variant of the MKS_MINI_12864 diff --git a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h index 5335fa012a..67074f84cb 100644 --- a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h +++ b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 1.2" + /** * Configuration_adv.h * @@ -377,7 +379,7 @@ * Enable Autotemp Mode with M104/M109 F S B. * Disable by sending M104/M109 with no F parameter (or F0 with AUTOTEMP_PROPORTIONAL). */ -#define AUTOTEMP +//#define AUTOTEMP #if ENABLED(AUTOTEMP) #define AUTOTEMP_OLDWEIGHT 0.98 // Turn on AUTOTEMP on M104/M109 by default using proportions set here @@ -437,7 +439,7 @@ * Hotend Idle Timeout * Prevent filament in the nozzle from charring and causing a critical jam. */ -//#define HOTEND_IDLE_TIMEOUT +#define HOTEND_IDLE_TIMEOUT #if ENABLED(HOTEND_IDLE_TIMEOUT) #define HOTEND_IDLE_TIMEOUT_SEC (5*60) // (seconds) Time without extruder movement to trigger protection #define HOTEND_IDLE_MIN_TRIGGER 180 // (°C) Minimum temperature to enable hotend protection @@ -470,7 +472,7 @@ #define CONTROLLERFAN_SPEED_ACTIVE 255 // (0-255) Active speed, used when any motor is enabled #define CONTROLLERFAN_SPEED_IDLE 0 // (0-255) Idle speed, used when motors are disabled #define CONTROLLERFAN_IDLE_TIME 60 // (seconds) Extra time to keep the fan running after disabling motors - //#define CONTROLLER_FAN_EDITABLE // Enable M710 configurable settings + #define CONTROLLER_FAN_EDITABLE // Enable M710 configurable settings #if ENABLED(CONTROLLER_FAN_EDITABLE) #define CONTROLLER_FAN_MENU // Enable the Controller Fan submenu #endif @@ -554,7 +556,7 @@ #define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed -#define CHAMBER_AUTO_FAN_TEMPERATURE 30 +#define CHAMBER_AUTO_FAN_TEMPERATURE 50 #define CHAMBER_AUTO_FAN_SPEED 255 #define COOLER_AUTO_FAN_TEMPERATURE 18 #define COOLER_AUTO_FAN_SPEED 255 @@ -741,7 +743,7 @@ //#define HOMING_BACKOFF_POST_MM { 2, 2, 2 } // (mm) Backoff from endstops after homing -//#define QUICK_HOME // If G28 contains XY do a diagonal move first +#define QUICK_HOME // If G28 contains XY do a diagonal move first //#define HOME_Y_BEFORE_X // If G28 contains XY home Y before X //#define HOME_Z_FIRST // Home Z first. Requires a Z-MIN endstop (not a probe). //#define CODEPENDENT_XY_HOMING // If X/Y can't home without homing Y/X first @@ -867,7 +869,7 @@ // On a 300mm bed a 5% grade would give a misalignment of ~1.5cm #define G34_MAX_GRADE 5 // (%) Maximum incline that G34 will handle - #define Z_STEPPER_ALIGN_ITERATIONS 5 // Number of iterations to apply during alignment + #define Z_STEPPER_ALIGN_ITERATIONS 3 // Number of iterations to apply during alignment #define Z_STEPPER_ALIGN_ACC 0.02 // Stop iterating early if the accuracy is better than this #define RESTORE_LEVELING_AFTER_G34 // Restore leveling after G34 is done? // After G34, re-home Z (G28 Z) or just calculate it from the last probe heights? @@ -1175,7 +1177,7 @@ #endif // Include a page of printer information in the LCD Main Menu - //#define LCD_INFO_MENU + #define LCD_INFO_MENU #if ENABLED(LCD_INFO_MENU) //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages #endif @@ -1229,7 +1231,7 @@ #endif // Scroll a longer status message into view - //#define STATUS_MESSAGE_SCROLLING + #define STATUS_MESSAGE_SCROLLING // On the Info Screen, display XY with one decimal place when possible //#define LCD_DECIMAL_SMALL_XY @@ -1361,16 +1363,16 @@ * - SDSORT_CACHE_NAMES will retain the sorted file listing in RAM. (Expensive!) * - SDSORT_DYNAMIC_RAM only uses RAM when the SD menu is visible. (Use with caution!) */ - //#define SDCARD_SORT_ALPHA + #define SDCARD_SORT_ALPHA // SD Card Sorting options #if ENABLED(SDCARD_SORT_ALPHA) #define SDSORT_LIMIT 40 // Maximum number of sorted items (10-256). Costs 27 bytes each. #define FOLDER_SORTING -1 // -1=above 0=none 1=below #define SDSORT_GCODE false // Allow turning sorting on/off with LCD and M34 G-code. - #define SDSORT_USES_RAM false // Pre-allocate a static array for faster pre-sorting. + #define SDSORT_USES_RAM true // Pre-allocate a static array for faster pre-sorting. #define SDSORT_USES_STACK false // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.) - #define SDSORT_CACHE_NAMES false // Keep sorted items in RAM longer for speedy performance. Most expensive option. + #define SDSORT_CACHE_NAMES true // Keep sorted items in RAM longer for speedy performance. Most expensive option. #define SDSORT_DYNAMIC_RAM false // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use! #define SDSORT_CACHE_VFATS 2 // Maximum number of 13-byte VFAT entries to use for sorting. // Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM. @@ -1381,10 +1383,10 @@ //#define UTF_FILENAME_SUPPORT // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT + #define LONG_FILENAME_HOST_SUPPORT // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES + #define SCROLL_LONG_FILENAMES // Leave the heaters on after Stop Print (not recommended!) //#define SD_ABORT_NO_COOLDOWN @@ -1476,7 +1478,7 @@ * * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] */ - //#define SDCARD_CONNECTION LCD + #define SDCARD_CONNECTION ONBOARD // Enable if SD detect is rendered useless (e.g., by using an SD extender) //#define NO_SD_DETECT @@ -1790,7 +1792,7 @@ * * Warning: Does not respect endstops! */ -//#define BABYSTEPPING +#define BABYSTEPPING #if ENABLED(BABYSTEPPING) //#define INTEGRATED_BABYSTEPPING // EXPERIMENTAL integration of babystepping into the Stepper ISR //#define BABYSTEP_WITHOUT_HOMING @@ -1801,7 +1803,7 @@ #define BABYSTEP_MULTIPLICATOR_Z 1 // (steps or mm) Steps or millimeter distance for each Z babystep #define BABYSTEP_MULTIPLICATOR_XY 1 // (steps or mm) Steps or millimeter distance for each XY babystep - //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. + #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. // Note: Extra time may be added to mitigate controller latency. @@ -1837,12 +1839,12 @@ * * See https://marlinfw.org/docs/features/lin_advance.html for full instructions. */ -//#define LIN_ADVANCE +#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) //#define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants - #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed + #define LIN_ADVANCE_K 0.16 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // If enabled, this will generate debug information output over USB. - //#define EXPERIMENTAL_SCURVE // Enable this option to permit S-Curve Acceleration + #define EXPERIMENTAL_SCURVE // Enable this option to permit S-Curve Acceleration #endif // @section leveling @@ -1982,7 +1984,7 @@ // // G2/G3 Arc Support // -#define ARC_SUPPORT // Disable this feature to save ~3226 bytes +//#define ARC_SUPPORT // Disable this feature to save ~3226 bytes #if ENABLED(ARC_SUPPORT) #define MM_PER_ARC_SEGMENT 1 // (mm) Length (or minimum length) of each arc segment //#define ARC_SEGMENTS_PER_R 1 // Max segment length, MM_PER = Min @@ -2141,7 +2143,7 @@ * Currently handles M108, M112, M410, M876 * NOTE: Not yet implemented for all platforms. */ -//#define EMERGENCY_PARSER +#define EMERGENCY_PARSER /** * Realtime Reporting (requires EMERGENCY_PARSER) @@ -2311,14 +2313,14 @@ * * Enable PARK_HEAD_ON_PAUSE to add the G-code M125 Pause and Park. */ -//#define ADVANCED_PAUSE_FEATURE +#define ADVANCED_PAUSE_FEATURE #if ENABLED(ADVANCED_PAUSE_FEATURE) #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. // This short retract is done immediately, before parking the nozzle. #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast. #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload. + #define FILAMENT_CHANGE_UNLOAD_LENGTH 550 // (mm) The length of filament for a complete unload. // For Bowden, the full length of the tube and nozzle. // For direct drive, the full length of the nozzle. // Set to 0 for manual unloading. @@ -2327,7 +2329,7 @@ // 0 to disable start loading and skip to fast load only #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast. #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle. + #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 350 // (mm) Load length of filament, from extruder gear to nozzle. // For Bowden, the full length of the tube and nozzle. // For direct drive, the full length of the nozzle. //#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted. @@ -2349,10 +2351,10 @@ #define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed. #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change. - //#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. - //#define HOME_BEFORE_FILAMENT_CHANGE // If needed, home before parking for filament change + #define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. + #define HOME_BEFORE_FILAMENT_CHANGE // If needed, home before parking for filament change - //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. + #define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) #endif @@ -2493,9 +2495,9 @@ #define INTERPOLATE true #if AXIS_IS_TMC(X) - #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. - #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for sensorless homing - #define X_MICROSTEPS 16 // 0..256 + #define X_CURRENT 580 // (mA) RMS current. Multiply by 1.414 for peak current. + #define X_CURRENT_HOME (X_CURRENT/2) // (mA) RMS current for sensorless homing + #define X_MICROSTEPS 16 // 0..256 #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis @@ -2511,8 +2513,8 @@ #endif #if AXIS_IS_TMC(Y) - #define Y_CURRENT 800 - #define Y_CURRENT_HOME Y_CURRENT + #define Y_CURRENT 580 + #define Y_CURRENT_HOME (Y_CURRENT/2) #define Y_MICROSTEPS 16 #define Y_RSENSE 0.11 #define Y_CHAIN_POS -1 @@ -2529,7 +2531,7 @@ #endif #if AXIS_IS_TMC(Z) - #define Z_CURRENT 800 + #define Z_CURRENT 580 #define Z_CURRENT_HOME Z_CURRENT #define Z_MICROSTEPS 16 #define Z_RSENSE 0.11 @@ -2565,7 +2567,7 @@ #endif #if AXIS_IS_TMC(E0) - #define E0_CURRENT 800 + #define E0_CURRENT 650 #define E0_MICROSTEPS 16 #define E0_RSENSE 0.11 #define E0_CHAIN_POS -1 @@ -2719,7 +2721,7 @@ * Define your own with: * { , , hysteresis_start[1..8] } */ - #define CHOPPER_TIMING CHOPPER_DEFAULT_12V // All axes (override below) + #define CHOPPER_TIMING CHOPPER_DEFAULT_24V // All axes (override below) //#define CHOPPER_TIMING_X CHOPPER_TIMING // For X Axes (override below) //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X //#define CHOPPER_TIMING_Y CHOPPER_TIMING // For Y Axes (override below) @@ -2748,7 +2750,7 @@ * M912 - Clear stepper driver overtemperature pre-warn condition flag. * M122 - Report driver parameters (Requires TMC_DEBUG) */ - //#define MONITOR_DRIVER_STATUS + #define MONITOR_DRIVER_STATUS #if ENABLED(MONITOR_DRIVER_STATUS) #define CURRENT_STEP_DOWN 50 // [mA] @@ -2811,16 +2813,16 @@ #if EITHER(SENSORLESS_HOMING, SENSORLESS_PROBING) // TMC2209: 0...255. TMC2130: -64...63 - #define X_STALL_SENSITIVITY 8 + #define X_STALL_SENSITIVITY 75 #define X2_STALL_SENSITIVITY X_STALL_SENSITIVITY - #define Y_STALL_SENSITIVITY 8 + #define Y_STALL_SENSITIVITY 75 #define Y2_STALL_SENSITIVITY Y_STALL_SENSITIVITY //#define Z_STALL_SENSITIVITY 8 //#define Z2_STALL_SENSITIVITY Z_STALL_SENSITIVITY //#define Z3_STALL_SENSITIVITY Z_STALL_SENSITIVITY //#define Z4_STALL_SENSITIVITY Z_STALL_SENSITIVITY //#define SPI_ENDSTOPS // TMC2130 only - //#define IMPROVE_HOMING_RELIABILITY + #define IMPROVE_HOMING_RELIABILITY #endif /** @@ -2839,13 +2841,13 @@ * Beta feature! * Create a 50/50 square wave step pulse optimal for stepper drivers. */ - //#define SQUARE_WAVE_STEPPING + #define SQUARE_WAVE_STEPPING /** * Enable M122 debugging command for TMC stepper drivers. * M122 S0/1 will enable continuous reporting. */ - //#define TMC_DEBUG + #define TMC_DEBUG /** * You can set your own advanced settings by filling in predefined functions. @@ -3242,7 +3244,7 @@ * This allows the laser to keep in perfect sync with the planner and removes * the powerup/down delay since lasers require negligible time. */ - //#define LASER_POWER_INLINE + #define LASER_POWER_INLINE #if ENABLED(LASER_POWER_INLINE) /** diff --git a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 2.0 with BLTouch/Configuration.h b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 2.0 with BLTouch/Configuration.h index 78c2dc9160..b39b936ce3 100644 --- a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 2.0 with BLTouch/Configuration.h +++ b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 2.0 with BLTouch/Configuration.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 2.0 with BLTouch" + /** * Configuration.h * @@ -69,7 +71,7 @@ // @section info // Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes. +#define STRING_CONFIG_H_AUTHOR "(KuranKaname, Ender-5 Pro)" // Who made the changes. //#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) /** @@ -87,10 +89,10 @@ #define SHOW_BOOTSCREEN // Show the bitmap in Marlin/_Bootscreen.h on startup. -//#define SHOW_CUSTOM_BOOTSCREEN +#define SHOW_CUSTOM_BOOTSCREEN // Show the bitmap in Marlin/_Statusscreen.h on the status screen. -//#define CUSTOM_STATUS_SCREEN_IMAGE +#define CUSTOM_STATUS_SCREEN_IMAGE // @section machine @@ -102,14 +104,14 @@ * * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] */ -#define SERIAL_PORT 0 +#define SERIAL_PORT 2 /** * Select a secondary serial port on the board to use for communication with the host. * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] */ -//#define SERIAL_PORT_2 -1 +#define SERIAL_PORT_2 -1 /** * Select a third serial port on the board to use for communication with the host. @@ -127,18 +129,18 @@ * * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ -#define BAUDRATE 250000 +#define BAUDRATE 115200 // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH // Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_RAMPS_14_EFB + #define MOTHERBOARD BOARD_BTT_SKR_MINI_E3_V2_0 #endif // Name displayed in the LCD "Ready" message and Info menu -//#define CUSTOM_MACHINE_NAME "3D Printer" +#define CUSTOM_MACHINE_NAME "Ender-5 Pro" // Printer's unique ID, used by some programs to differentiate between machines. // Choose your own or use a service like https://www.uuidgenerator.net/version4 @@ -424,7 +426,7 @@ #define TEMP_SENSOR_5 0 #define TEMP_SENSOR_6 0 #define TEMP_SENSOR_7 0 -#define TEMP_SENSOR_BED 0 +#define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 #define TEMP_SENSOR_COOLER 0 @@ -480,7 +482,7 @@ #define HEATER_5_MAXTEMP 275 #define HEATER_6_MAXTEMP 275 #define HEATER_7_MAXTEMP 275 -#define BED_MAXTEMP 150 +#define BED_MAXTEMP 125 #define CHAMBER_MAXTEMP 60 /** @@ -505,21 +507,22 @@ #define PID_K1 0.95 // Smoothing factor within any PID loop #if ENABLED(PIDTEMP) - //#define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) - //#define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) + #define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) + #define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) // Set/get with gcode: M301 E[extruder number, 0-2] + // Creality Ender-5 Pro #if ENABLED(PID_PARAMS_PER_HOTEND) // Specify between 1 and HOTENDS values per array. // If fewer than EXTRUDER values are provided, the last element will be repeated. - #define DEFAULT_Kp_LIST { 22.20, 22.20 } - #define DEFAULT_Ki_LIST { 1.08, 1.08 } - #define DEFAULT_Kd_LIST { 114.00, 114.00 } + #define DEFAULT_Kp_LIST { 21.73, 21.73 } + #define DEFAULT_Ki_LIST { 1.54, 1.54 } + #define DEFAULT_Kd_LIST { 76.55, 76.55 } #else - #define DEFAULT_Kp 22.20 - #define DEFAULT_Ki 1.08 - #define DEFAULT_Kd 114.00 + #define DEFAULT_Kp 21.73 + #define DEFAULT_Ki 1.54 + #define DEFAULT_Kd 76.55 #endif #endif // PIDTEMP @@ -540,7 +543,7 @@ * heater. If your configuration is significantly different than this and you don't understand * the issues involved, don't use bed PID until someone else verifies that your hardware works. */ -//#define PIDTEMPBED +#define PIDTEMPBED //#define BED_LIMIT_SWITCHING @@ -558,9 +561,9 @@ // 120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) // from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) - #define DEFAULT_bedKp 10.00 - #define DEFAULT_bedKi .023 - #define DEFAULT_bedKd 305.4 + #define DEFAULT_bedKp 36.7 + #define DEFAULT_bedKi 1.96 + #define DEFAULT_bedKd 456.7 // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. #endif // PIDTEMPBED @@ -634,7 +637,7 @@ * Note: For Bowden Extruders make this large enough to allow load/unload. */ #define PREVENT_LENGTHY_EXTRUDE -#define EXTRUDE_MAXLENGTH 200 +#define EXTRUDE_MAXLENGTH 600 //=========================================================================== //======================== Thermal Runaway Protection ======================= @@ -683,11 +686,11 @@ // Specify here all the endstop connectors that are connected to any endstop or probe. // Almost all printers will be using one per axis. Probes will use one or more of the // extra connectors. Leave undefined any used for non-endstop and non-probe purposes. -#define USE_XMIN_PLUG -#define USE_YMIN_PLUG +//#define USE_XMIN_PLUG +//#define USE_YMIN_PLUG #define USE_ZMIN_PLUG -//#define USE_XMAX_PLUG -//#define USE_YMAX_PLUG +#define USE_XMAX_PLUG +#define USE_YMAX_PLUG //#define USE_ZMAX_PLUG // Enable pullup for all endstops to prevent a floating state @@ -743,15 +746,15 @@ * TMC5130, TMC5130_STANDALONE, TMC5160, TMC5160_STANDALONE * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'L6474', 'POWERSTEP01', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2160', 'TMC2160_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC2209', 'TMC2209_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE', 'TMC5160', 'TMC5160_STANDALONE'] */ -#define X_DRIVER_TYPE A4988 -#define Y_DRIVER_TYPE A4988 -#define Z_DRIVER_TYPE A4988 +#define X_DRIVER_TYPE TMC2209 +#define Y_DRIVER_TYPE TMC2209 +#define Z_DRIVER_TYPE TMC2209 //#define X2_DRIVER_TYPE A4988 //#define Y2_DRIVER_TYPE A4988 //#define Z2_DRIVER_TYPE A4988 //#define Z3_DRIVER_TYPE A4988 //#define Z4_DRIVER_TYPE A4988 -#define E0_DRIVER_TYPE A4988 +#define E0_DRIVER_TYPE TMC2209 //#define E1_DRIVER_TYPE A4988 //#define E2_DRIVER_TYPE A4988 //#define E3_DRIVER_TYPE A4988 @@ -806,14 +809,14 @@ * Override with M92 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 500 } +#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 800, 93 } /** * Default Max Feed Rate (mm/s) * Override with M203 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 } +#define DEFAULT_MAX_FEEDRATE { 500, 500, 5, 25 } //#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 #if ENABLED(LIMITED_MAX_FR_EDITING) @@ -826,7 +829,7 @@ * Override with M201 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 } +#define DEFAULT_MAX_ACCELERATION { 500, 500, 100, 5000 } //#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 #if ENABLED(LIMITED_MAX_ACCEL_EDITING) @@ -841,9 +844,9 @@ * M204 R Retract Acceleration * M204 T Travel Acceleration */ -#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves +#define DEFAULT_ACCELERATION 500 // X, Y, Z and E acceleration for printing moves +#define DEFAULT_RETRACT_ACCELERATION 500 // E acceleration for retracts +#define DEFAULT_TRAVEL_ACCELERATION 500 // X, Y, Z acceleration for travel (non printing) moves /** * Default Jerk limits (mm/s) @@ -853,10 +856,10 @@ * When changing speed and direction, if the difference is less than the * value set here, it may happen instantaneously. */ -//#define CLASSIC_JERK +#define CLASSIC_JERK #if ENABLED(CLASSIC_JERK) - #define DEFAULT_XJERK 10.0 - #define DEFAULT_YJERK 10.0 + #define DEFAULT_XJERK 8.0 + #define DEFAULT_YJERK 8.0 #define DEFAULT_ZJERK 0.3 //#define TRAVEL_EXTRA_XYJERK 0.0 // Additional jerk allowance for all travel moves @@ -877,7 +880,7 @@ * https://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html */ #if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.013 // (mm) Distance from real junction edge + #define JUNCTION_DEVIATION_MM 0.08 // (mm) Distance from real junction edge #define JD_HANDLE_SMALL_SEGMENTS // Use curvature estimation instead of just the junction angle // for small segments (< 1mm) with large junction angles (> 135°). #endif @@ -906,10 +909,10 @@ * The probe replaces the Z-MIN endstop and is used for Z homing. * (Automatically enables USE_PROBE_FOR_Z_HOMING.) */ -#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN +//#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN // Force the use of the probe for Z-axis homing -//#define USE_PROBE_FOR_Z_HOMING +#define USE_PROBE_FOR_Z_HOMING /** * Z_MIN_PROBE_PIN @@ -926,7 +929,7 @@ * - normally-closed switches to GND and D32. * - normally-open switches to 5V and D32. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +#define Z_MIN_PROBE_PIN PC14 // Pin 32 is the RAMPS default /** * Probe Type @@ -963,7 +966,7 @@ /** * The BLTouch probe uses a Hall effect sensor and emulates a servo. */ -//#define BLTOUCH +#define BLTOUCH /** * Touch-MI Probe by hotends.fr @@ -1059,13 +1062,13 @@ // Most probes should stay away from the edges of the bed, but // with NOZZLE_AS_PROBE this can be negative for a wider probing area. -#define PROBING_MARGIN 10 +#define PROBING_MARGIN 8 // X and Y axis travel speed (mm/min) between probes -#define XY_PROBE_FEEDRATE (133*60) +#define XY_PROBE_FEEDRATE (200*60) // Feedrate (mm/min) for the first approach when double-probing (MULTIPLE_PROBING == 2) -#define Z_PROBE_FEEDRATE_FAST (4*60) +#define Z_PROBE_FEEDRATE_FAST (6*60) // Feedrate (mm/min) for the "accurate" probe of each point #define Z_PROBE_FEEDRATE_SLOW (Z_PROBE_FEEDRATE_FAST / 2) @@ -1106,7 +1109,7 @@ * A total of 2 does fast/slow probes with a weighted average. * A total of 3 or more adds more slow probes, taking the average. */ -//#define MULTIPLE_PROBING 2 +#define MULTIPLE_PROBING 2 //#define EXTRA_PROBING 1 /** @@ -1185,19 +1188,19 @@ // @section extruder #define DISABLE_E false // Disable the extruder when not stepping -#define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled +//#define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled // @section machine // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR false +#define INVERT_X_DIR true #define INVERT_Y_DIR true -#define INVERT_Z_DIR false +#define INVERT_Z_DIR true // @section extruder // For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR false +#define INVERT_E0_DIR true #define INVERT_E1_DIR false #define INVERT_E2_DIR false #define INVERT_E3_DIR false @@ -1225,15 +1228,15 @@ // Direction of endstops when homing; 1=MAX, -1=MIN // :[-1,1] -#define X_HOME_DIR -1 -#define Y_HOME_DIR -1 +#define X_HOME_DIR 1 +#define Y_HOME_DIR 1 #define Z_HOME_DIR -1 // @section machine // The size of the printable area -#define X_BED_SIZE 200 -#define Y_BED_SIZE 200 +#define X_BED_SIZE 230 +#define Y_BED_SIZE 225 // Travel limits (mm) after homing, corresponding to endstop positions. #define X_MIN_POS 0 @@ -1241,7 +1244,7 @@ #define Z_MIN_POS 0 #define X_MAX_POS X_BED_SIZE #define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 200 +#define Z_MAX_POS 300 /** * Software Endstops @@ -1269,7 +1272,7 @@ #endif #if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS) - //#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD + #define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD #endif /** @@ -1387,7 +1390,7 @@ */ //#define AUTO_BED_LEVELING_3POINT //#define AUTO_BED_LEVELING_LINEAR -//#define AUTO_BED_LEVELING_BILINEAR +#define AUTO_BED_LEVELING_BILINEAR //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING @@ -1396,16 +1399,16 @@ * these options to restore the prior leveling state or to always enable * leveling immediately after G28. */ -//#define RESTORE_LEVELING_AFTER_G28 +#define RESTORE_LEVELING_AFTER_G28 //#define ENABLE_LEVELING_AFTER_G28 /** * Auto-leveling needs preheating */ -//#define PREHEAT_BEFORE_LEVELING +#define PREHEAT_BEFORE_LEVELING #if ENABLED(PREHEAT_BEFORE_LEVELING) - #define LEVELING_NOZZLE_TEMP 120 // (°C) Only applies to E0 at this time - #define LEVELING_BED_TEMP 50 + #define LEVELING_NOZZLE_TEMP 180 // (°C) Only applies to E0 at this time + #define LEVELING_BED_TEMP 60 #endif /** @@ -1438,11 +1441,11 @@ /** * Enable the G26 Mesh Validation Pattern tool. */ - //#define G26_MESH_VALIDATION + #define G26_MESH_VALIDATION #if ENABLED(G26_MESH_VALIDATION) #define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle. #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for G26. - #define MESH_TEST_HOTEND_TEMP 205 // (°C) Default nozzle temperature for G26. + #define MESH_TEST_HOTEND_TEMP 180 // (°C) Default nozzle temperature for G26. #define MESH_TEST_BED_TEMP 60 // (°C) Default bed temperature for G26. #define G26_XY_FEEDRATE 20 // (mm/s) Feedrate for G26 XY moves. #define G26_XY_FEEDRATE_TRAVEL 100 // (mm/s) Feedrate for G26 XY travel moves. @@ -1454,7 +1457,7 @@ #if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR) // Set the number of grid points per dimension. - #define GRID_MAX_POINTS_X 3 + #define GRID_MAX_POINTS_X 9 #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X // Probe along the Y axis, advancing X after each column @@ -1464,7 +1467,7 @@ // Beyond the probed grid, continue the implied tilt? // Default is to maintain the height of the nearest edge. - //#define EXTRAPOLATE_BEYOND_GRID + #define EXTRAPOLATE_BEYOND_GRID // // Experimental Subdivision of the grid by Catmull-Rom method. @@ -1484,10 +1487,10 @@ //========================= Unified Bed Leveling ============================ //=========================================================================== - //#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh + #define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh - #define MESH_INSET 1 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. + #define MESH_INSET 10 // Set Mesh bounds as an inset region of the bed + #define GRID_MAX_POINTS_X 9 // Don't use more than 15 points per axis, implementation limited. #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X //#define UBL_HILBERT_CURVE // Use Hilbert distribution for less travel when probing multiple points @@ -1518,16 +1521,16 @@ * Add a bed leveling sub-menu for ABL or MBL. * Include a guided procedure if manual probing is enabled. */ -//#define LCD_BED_LEVELING +#define LCD_BED_LEVELING #if ENABLED(LCD_BED_LEVELING) #define MESH_EDIT_Z_STEP 0.025 // (mm) Step size while manually probing Z axis. #define LCD_PROBE_Z_RANGE 4 // (mm) Z Range centered on Z_MIN_POS for LCD Z adjustment - //#define MESH_EDIT_MENU // Add a menu to edit mesh points + #define MESH_EDIT_MENU // Add a menu to edit mesh points #endif // Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS +#define LEVEL_BED_CORNERS #if ENABLED(LEVEL_BED_CORNERS) #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets @@ -1587,7 +1590,7 @@ // - Move the Z probe (or nozzle) to a defined XY point before Z Homing. // - Prevent Z homing when the Z probe is outside bed area. // -//#define Z_SAFE_HOMING +#define Z_SAFE_HOMING #if ENABLED(Z_SAFE_HOMING) #define Z_SAFE_HOMING_X_POINT X_CENTER // X point for Z homing @@ -1595,7 +1598,7 @@ #endif // Homing speeds (mm/min) -#define HOMING_FEEDRATE_MM_M { (50*60), (50*60), (4*60) } +#define HOMING_FEEDRATE_MM_M { (70*60), (70*60), (6*60) } // Validate that endstops are triggered on homing moves #define VALIDATE_HOMING_ENDSTOPS @@ -1672,7 +1675,7 @@ * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) */ -//#define EEPROM_SETTINGS // Persistent storage with M500 and M501 +#define EEPROM_SETTINGS // Persistent storage with M500 and M501 //#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. #define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load @@ -1706,16 +1709,16 @@ // Preheat Constants - Up to 5 are supported without changes // #define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 180 -#define PREHEAT_1_TEMP_BED 70 +#define PREHEAT_1_TEMP_HOTEND 185 +#define PREHEAT_1_TEMP_BED 45 #define PREHEAT_1_TEMP_CHAMBER 35 -#define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 +#define PREHEAT_1_FAN_SPEED 255 // Value from 0 to 255 #define PREHEAT_2_LABEL "ABS" #define PREHEAT_2_TEMP_HOTEND 240 -#define PREHEAT_2_TEMP_BED 110 +#define PREHEAT_2_TEMP_BED 70 #define PREHEAT_2_TEMP_CHAMBER 35 -#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 +#define PREHEAT_2_FAN_SPEED 255 // Value from 0 to 255 /** * Nozzle Park @@ -1728,7 +1731,7 @@ * P1 Raise the nozzle always to Z-park height. * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. */ -//#define NOZZLE_PARK_FEATURE +#define NOZZLE_PARK_FEATURE #if ENABLED(NOZZLE_PARK_FEATURE) // Specify a park position as { X, Y, Z_raise } @@ -1921,7 +1924,7 @@ * * :['JAPANESE', 'WESTERN', 'CYRILLIC'] */ -#define DISPLAY_CHARSET_HD44780 JAPANESE +#define DISPLAY_CHARSET_HD44780 WESTERN /** * Info Screen Style (0:Classic, 1:Průša) @@ -1936,7 +1939,7 @@ * SD Card support is disabled by default. If your controller has an SD slot, * you must uncomment the following option or it won't work. */ -//#define SDSUPPORT +#define SDSUPPORT /** * SD CARD: ENABLE CRC @@ -2287,7 +2290,10 @@ // This is RAMPS-compatible using a single 10-pin connector. // (For CR-10 owners who want to replace the Melzi Creality board but retain the display) // -//#define CR10_STOCKDISPLAY +#define CR10_STOCKDISPLAY +#if ENABLED(CR10_STOCKDISPLAY) + #define RET6_12864_LCD // Specific to the SoC (can either be RET / VET) +#endif // // Ender-2 OEM display, a variant of the MKS_MINI_12864 @@ -2618,7 +2624,7 @@ // Use software PWM to drive the fan, as for the heaters. This uses a very low frequency // which is not as annoying as with the hardware PWM. On the other hand, if this frequency // is too low, you should also increment SOFT_PWM_SCALE. -//#define FAN_SOFT_PWM +#define FAN_SOFT_PWM // Incrementing this by 1 will double the software PWM frequency, // affecting heaters, and the fan if FAN_SOFT_PWM is enabled. diff --git a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 2.0 with BLTouch/Configuration_adv.h b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 2.0 with BLTouch/Configuration_adv.h index 5335fa012a..02aec33689 100644 --- a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 2.0 with BLTouch/Configuration_adv.h +++ b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 2.0 with BLTouch/Configuration_adv.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 2.0 with BLTouch" + /** * Configuration_adv.h * @@ -461,7 +463,7 @@ * The fan turns on automatically whenever any driver is enabled and turns * off (or reduces to idle speed) shortly after drivers are turned off. */ -//#define USE_CONTROLLER_FAN +#define USE_CONTROLLER_FAN #if ENABLED(USE_CONTROLLER_FAN) //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan //#define CONTROLLER_FAN_USE_Z_ONLY // With this option only the Z axis is considered @@ -470,7 +472,7 @@ #define CONTROLLERFAN_SPEED_ACTIVE 255 // (0-255) Active speed, used when any motor is enabled #define CONTROLLERFAN_SPEED_IDLE 0 // (0-255) Idle speed, used when motors are disabled #define CONTROLLERFAN_IDLE_TIME 60 // (seconds) Extra time to keep the fan running after disabling motors - //#define CONTROLLER_FAN_EDITABLE // Enable M710 configurable settings + #define CONTROLLER_FAN_EDITABLE // Enable M710 configurable settings #if ENABLED(CONTROLLER_FAN_EDITABLE) #define CONTROLLER_FAN_MENU // Enable the Controller Fan submenu #endif @@ -741,7 +743,7 @@ //#define HOMING_BACKOFF_POST_MM { 2, 2, 2 } // (mm) Backoff from endstops after homing -//#define QUICK_HOME // If G28 contains XY do a diagonal move first +#define QUICK_HOME // If G28 contains XY do a diagonal move first //#define HOME_Y_BEFORE_X // If G28 contains XY home Y before X //#define HOME_Z_FIRST // Home Z first. Requires a Z-MIN endstop (not a probe). //#define CODEPENDENT_XY_HOMING // If X/Y can't home without homing Y/X first @@ -766,7 +768,7 @@ // Safety: The probe needs time to recognize the command. // Minimum command delay (ms). Enable and increase if needed. - //#define BLTOUCH_DELAY 500 + #define BLTOUCH_DELAY 500 /** * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones: @@ -792,7 +794,7 @@ * differs, a mode set eeprom write will be completed at initialization. * Use the option below to force an eeprom write to a V3.1 probe regardless. */ - //#define BLTOUCH_SET_5V_MODE + #define BLTOUCH_SET_5V_MODE /** * Safety: Activate if connecting a probe with an unknown voltage mode. @@ -826,7 +828,7 @@ // Define probe X and Y positions for Z1, Z2 [, Z3 [, Z4]] // If not defined, probe limits will be used. // Override with 'M422 S X Y' - //#define Z_STEPPER_ALIGN_XY { { 10, 190 }, { 100, 10 }, { 190, 190 } } + //#define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } /** * Orientation for the automatically-calculated probe positions. @@ -867,7 +869,7 @@ // On a 300mm bed a 5% grade would give a misalignment of ~1.5cm #define G34_MAX_GRADE 5 // (%) Maximum incline that G34 will handle - #define Z_STEPPER_ALIGN_ITERATIONS 5 // Number of iterations to apply during alignment + #define Z_STEPPER_ALIGN_ITERATIONS 3 // Number of iterations to apply during alignment #define Z_STEPPER_ALIGN_ACC 0.02 // Stop iterating early if the accuracy is better than this #define RESTORE_LEVELING_AFTER_G34 // Restore leveling after G34 is done? // After G34, re-home Z (G28 Z) or just calculate it from the last probe heights? @@ -928,7 +930,7 @@ #define DEFAULT_STEPPER_DEACTIVE_TIME 120 #define DISABLE_INACTIVE_X true #define DISABLE_INACTIVE_Y true -#define DISABLE_INACTIVE_Z true // Set 'false' if the nozzle could fall onto your printed part! +#define DISABLE_INACTIVE_Z false // Set 'false' if the nozzle could fall onto your printed part! #define DISABLE_INACTIVE_E true // Default Minimum Feedrates for printing and travel moves @@ -1160,7 +1162,7 @@ // Add Probe Z Offset calibration to the Z Probe Offsets menu #if HAS_BED_PROBE - //#define PROBE_OFFSET_WIZARD + #define PROBE_OFFSET_WIZARD #if ENABLED(PROBE_OFFSET_WIZARD) // // Enable to init the Probe Z-Offset when starting the Wizard. @@ -1175,7 +1177,7 @@ #endif // Include a page of printer information in the LCD Main Menu - //#define LCD_INFO_MENU + #define LCD_INFO_MENU #if ENABLED(LCD_INFO_MENU) //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages #endif @@ -1229,7 +1231,7 @@ #endif // Scroll a longer status message into view - //#define STATUS_MESSAGE_SCROLLING + #define STATUS_MESSAGE_SCROLLING // On the Info Screen, display XY with one decimal place when possible //#define LCD_DECIMAL_SMALL_XY @@ -1299,7 +1301,7 @@ //#define NO_SD_AUTOSTART // Remove auto#.g file support completely to save some Flash, SRAM //#define MENU_ADDAUTOSTART // Add a menu option to run auto#.g files - //#define BROWSE_MEDIA_ON_INSERT // Open the file browser when media is inserted + #define BROWSE_MEDIA_ON_INSERT // Open the file browser when media is inserted #define EVENT_GCODE_SD_ABORT "G28XY" // G-code to run on SD Abort Print (e.g., "G28XY" or "G27") @@ -1381,10 +1383,10 @@ //#define UTF_FILENAME_SUPPORT // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT + #define LONG_FILENAME_HOST_SUPPORT // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES + #define SCROLL_LONG_FILENAMES // Leave the heaters on after Stop Print (not recommended!) //#define SD_ABORT_NO_COOLDOWN @@ -1476,7 +1478,7 @@ * * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] */ - //#define SDCARD_CONNECTION LCD + #define SDCARD_CONNECTION ONBOARD // Enable if SD detect is rendered useless (e.g., by using an SD extender) //#define NO_SD_DETECT @@ -1790,7 +1792,7 @@ * * Warning: Does not respect endstops! */ -//#define BABYSTEPPING +#define BABYSTEPPING #if ENABLED(BABYSTEPPING) //#define INTEGRATED_BABYSTEPPING // EXPERIMENTAL integration of babystepping into the Stepper ISR //#define BABYSTEP_WITHOUT_HOMING @@ -1801,7 +1803,7 @@ #define BABYSTEP_MULTIPLICATOR_Z 1 // (steps or mm) Steps or millimeter distance for each Z babystep #define BABYSTEP_MULTIPLICATOR_XY 1 // (steps or mm) Steps or millimeter distance for each XY babystep - //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. + #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. // Note: Extra time may be added to mitigate controller latency. @@ -1813,10 +1815,10 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 - //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping + #define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping #if ENABLED(BABYSTEP_ZPROBE_OFFSET) //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - //#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor + #define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif @@ -1837,10 +1839,10 @@ * * See https://marlinfw.org/docs/features/lin_advance.html for full instructions. */ -//#define LIN_ADVANCE +#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) //#define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants - #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed + #define LIN_ADVANCE_K 0.63 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // If enabled, this will generate debug information output over USB. //#define EXPERIMENTAL_SCURVE // Enable this option to permit S-Curve Acceleration #endif @@ -1989,7 +1991,7 @@ #define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle //#define ARC_SEGMENTS_PER_SEC 50 // Use feedrate to choose segment length (with MM_PER_ARC_SEGMENT as the minimum) #define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections - //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles + #define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes //#define SF_ARC_FIX // Enable only if using SkeinForge with "Arc Point" fillet procedure #endif @@ -2311,14 +2313,14 @@ * * Enable PARK_HEAD_ON_PAUSE to add the G-code M125 Pause and Park. */ -//#define ADVANCED_PAUSE_FEATURE +#define ADVANCED_PAUSE_FEATURE #if ENABLED(ADVANCED_PAUSE_FEATURE) #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. // This short retract is done immediately, before parking the nozzle. #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast. #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload. + #define FILAMENT_CHANGE_UNLOAD_LENGTH 500 // (mm) The length of filament for a complete unload. // For Bowden, the full length of the tube and nozzle. // For direct drive, the full length of the nozzle. // Set to 0 for manual unloading. @@ -2330,9 +2332,9 @@ #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle. // For Bowden, the full length of the tube and nozzle. // For direct drive, the full length of the nozzle. - //#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted. + #define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted. #define ADVANCED_PAUSE_PURGE_FEEDRATE 3 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate. - #define ADVANCED_PAUSE_PURGE_LENGTH 50 // (mm) Length to extrude after loading. + #define ADVANCED_PAUSE_PURGE_LENGTH 600 // (mm) Length to extrude after loading. // Set to 0 for manual extrusion. // Filament can be extruded repeatedly from the Filament Change menu // until extrusion is consistent, and to purge old filament. @@ -2349,7 +2351,7 @@ #define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed. #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change. - //#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. + #define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. //#define HOME_BEFORE_FILAMENT_CHANGE // If needed, home before parking for filament change //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. @@ -2493,7 +2495,7 @@ #define INTERPOLATE true #if AXIS_IS_TMC(X) - #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. + #define X_CURRENT 580 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for sensorless homing #define X_MICROSTEPS 16 // 0..256 #define X_RSENSE 0.11 @@ -2511,7 +2513,7 @@ #endif #if AXIS_IS_TMC(Y) - #define Y_CURRENT 800 + #define Y_CURRENT 650 #define Y_CURRENT_HOME Y_CURRENT #define Y_MICROSTEPS 16 #define Y_RSENSE 0.11 @@ -2529,7 +2531,7 @@ #endif #if AXIS_IS_TMC(Z) - #define Z_CURRENT 800 + #define Z_CURRENT 580 #define Z_CURRENT_HOME Z_CURRENT #define Z_MICROSTEPS 16 #define Z_RSENSE 0.11 @@ -2565,7 +2567,7 @@ #endif #if AXIS_IS_TMC(E0) - #define E0_CURRENT 800 + #define E0_CURRENT 650 #define E0_MICROSTEPS 16 #define E0_RSENSE 0.11 #define E0_CHAIN_POS -1 @@ -2670,22 +2672,22 @@ * Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers * on the same serial port, either here or in your board's pins file. */ - //#define X_SLAVE_ADDRESS 0 - //#define Y_SLAVE_ADDRESS 0 - //#define Z_SLAVE_ADDRESS 0 - //#define X2_SLAVE_ADDRESS 0 - //#define Y2_SLAVE_ADDRESS 0 - //#define Z2_SLAVE_ADDRESS 0 - //#define Z3_SLAVE_ADDRESS 0 - //#define Z4_SLAVE_ADDRESS 0 - //#define E0_SLAVE_ADDRESS 0 - //#define E1_SLAVE_ADDRESS 0 - //#define E2_SLAVE_ADDRESS 0 - //#define E3_SLAVE_ADDRESS 0 - //#define E4_SLAVE_ADDRESS 0 - //#define E5_SLAVE_ADDRESS 0 - //#define E6_SLAVE_ADDRESS 0 - //#define E7_SLAVE_ADDRESS 0 + #define X_SLAVE_ADDRESS 0 + #define Y_SLAVE_ADDRESS 2 + #define Z_SLAVE_ADDRESS 1 + #define X2_SLAVE_ADDRESS 0 + #define Y2_SLAVE_ADDRESS 0 + #define Z2_SLAVE_ADDRESS 0 + #define Z3_SLAVE_ADDRESS 0 + #define Z4_SLAVE_ADDRESS 0 + #define E0_SLAVE_ADDRESS 3 + #define E1_SLAVE_ADDRESS 0 + #define E2_SLAVE_ADDRESS 0 + #define E3_SLAVE_ADDRESS 0 + #define E4_SLAVE_ADDRESS 0 + #define E5_SLAVE_ADDRESS 0 + #define E6_SLAVE_ADDRESS 0 + #define E7_SLAVE_ADDRESS 0 /** * Software enable @@ -2719,7 +2721,7 @@ * Define your own with: * { , , hysteresis_start[1..8] } */ - #define CHOPPER_TIMING CHOPPER_DEFAULT_12V // All axes (override below) + #define CHOPPER_TIMING CHOPPER_DEFAULT_24V // All axes (override below) //#define CHOPPER_TIMING_X CHOPPER_TIMING // For X Axes (override below) //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X //#define CHOPPER_TIMING_Y CHOPPER_TIMING // For Y Axes (override below) @@ -2811,16 +2813,16 @@ #if EITHER(SENSORLESS_HOMING, SENSORLESS_PROBING) // TMC2209: 0...255. TMC2130: -64...63 - #define X_STALL_SENSITIVITY 8 + #define X_STALL_SENSITIVITY 50 #define X2_STALL_SENSITIVITY X_STALL_SENSITIVITY - #define Y_STALL_SENSITIVITY 8 + #define Y_STALL_SENSITIVITY 50 #define Y2_STALL_SENSITIVITY Y_STALL_SENSITIVITY //#define Z_STALL_SENSITIVITY 8 //#define Z2_STALL_SENSITIVITY Z_STALL_SENSITIVITY //#define Z3_STALL_SENSITIVITY Z_STALL_SENSITIVITY //#define Z4_STALL_SENSITIVITY Z_STALL_SENSITIVITY //#define SPI_ENDSTOPS // TMC2130 only - //#define IMPROVE_HOMING_RELIABILITY + #define IMPROVE_HOMING_RELIABILITY #endif /** diff --git a/config/examples/Creality/Ender-5 Pro/CrealityV1/Configuration.h b/config/examples/Creality/Ender-5 Pro/CrealityV1/Configuration.h index 78c2dc9160..a3ef84ca22 100644 --- a/config/examples/Creality/Ender-5 Pro/CrealityV1/Configuration.h +++ b/config/examples/Creality/Ender-5 Pro/CrealityV1/Configuration.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Creality/Ender-5 Pro/CrealityV1" + /** * Configuration.h * @@ -69,7 +71,7 @@ // @section info // Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes. +#define STRING_CONFIG_H_AUTHOR "(thisiskeithb, Ender-5 Pro)" // Who made the changes. //#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) /** @@ -87,10 +89,10 @@ #define SHOW_BOOTSCREEN // Show the bitmap in Marlin/_Bootscreen.h on startup. -//#define SHOW_CUSTOM_BOOTSCREEN +#define SHOW_CUSTOM_BOOTSCREEN // Show the bitmap in Marlin/_Statusscreen.h on the status screen. -//#define CUSTOM_STATUS_SCREEN_IMAGE +#define CUSTOM_STATUS_SCREEN_IMAGE // @section machine @@ -127,18 +129,18 @@ * * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ -#define BAUDRATE 250000 +#define BAUDRATE 115200 // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH // Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_RAMPS_14_EFB + #define MOTHERBOARD BOARD_MELZI_CREALITY #endif // Name displayed in the LCD "Ready" message and Info menu -//#define CUSTOM_MACHINE_NAME "3D Printer" +#define CUSTOM_MACHINE_NAME "Ender-5 Pro" // Printer's unique ID, used by some programs to differentiate between machines. // Choose your own or use a service like https://www.uuidgenerator.net/version4 @@ -424,7 +426,7 @@ #define TEMP_SENSOR_5 0 #define TEMP_SENSOR_6 0 #define TEMP_SENSOR_7 0 -#define TEMP_SENSOR_BED 0 +#define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 #define TEMP_SENSOR_COOLER 0 @@ -480,7 +482,7 @@ #define HEATER_5_MAXTEMP 275 #define HEATER_6_MAXTEMP 275 #define HEATER_7_MAXTEMP 275 -#define BED_MAXTEMP 150 +#define BED_MAXTEMP 125 #define CHAMBER_MAXTEMP 60 /** @@ -505,21 +507,22 @@ #define PID_K1 0.95 // Smoothing factor within any PID loop #if ENABLED(PIDTEMP) - //#define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) - //#define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) + #define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) + #define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) // Set/get with gcode: M301 E[extruder number, 0-2] + // Creality Ender-5 Pro #if ENABLED(PID_PARAMS_PER_HOTEND) // Specify between 1 and HOTENDS values per array. // If fewer than EXTRUDER values are provided, the last element will be repeated. - #define DEFAULT_Kp_LIST { 22.20, 22.20 } - #define DEFAULT_Ki_LIST { 1.08, 1.08 } - #define DEFAULT_Kd_LIST { 114.00, 114.00 } + #define DEFAULT_Kp_LIST { 21.73, 21.73 } + #define DEFAULT_Ki_LIST { 1.54, 1.54 } + #define DEFAULT_Kd_LIST { 76.55, 76.55 } #else - #define DEFAULT_Kp 22.20 - #define DEFAULT_Ki 1.08 - #define DEFAULT_Kd 114.00 + #define DEFAULT_Kp 21.73 + #define DEFAULT_Ki 1.54 + #define DEFAULT_Kd 76.55 #endif #endif // PIDTEMP @@ -683,11 +686,11 @@ // Specify here all the endstop connectors that are connected to any endstop or probe. // Almost all printers will be using one per axis. Probes will use one or more of the // extra connectors. Leave undefined any used for non-endstop and non-probe purposes. -#define USE_XMIN_PLUG -#define USE_YMIN_PLUG +//#define USE_XMIN_PLUG +//#define USE_YMIN_PLUG #define USE_ZMIN_PLUG -//#define USE_XMAX_PLUG -//#define USE_YMAX_PLUG +#define USE_XMAX_PLUG +#define USE_YMAX_PLUG //#define USE_ZMAX_PLUG // Enable pullup for all endstops to prevent a floating state @@ -743,15 +746,15 @@ * TMC5130, TMC5130_STANDALONE, TMC5160, TMC5160_STANDALONE * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'L6474', 'POWERSTEP01', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2160', 'TMC2160_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC2209', 'TMC2209_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE', 'TMC5160', 'TMC5160_STANDALONE'] */ -#define X_DRIVER_TYPE A4988 -#define Y_DRIVER_TYPE A4988 -#define Z_DRIVER_TYPE A4988 +#define X_DRIVER_TYPE TMC2208_STANDALONE +#define Y_DRIVER_TYPE TMC2208_STANDALONE +#define Z_DRIVER_TYPE TMC2208_STANDALONE //#define X2_DRIVER_TYPE A4988 //#define Y2_DRIVER_TYPE A4988 //#define Z2_DRIVER_TYPE A4988 //#define Z3_DRIVER_TYPE A4988 //#define Z4_DRIVER_TYPE A4988 -#define E0_DRIVER_TYPE A4988 +#define E0_DRIVER_TYPE TMC2208_STANDALONE //#define E1_DRIVER_TYPE A4988 //#define E2_DRIVER_TYPE A4988 //#define E3_DRIVER_TYPE A4988 @@ -806,14 +809,14 @@ * Override with M92 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 500 } +#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 800, 93 } /** * Default Max Feed Rate (mm/s) * Override with M203 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 } +#define DEFAULT_MAX_FEEDRATE { 500, 500, 5, 25 } //#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 #if ENABLED(LIMITED_MAX_FR_EDITING) @@ -826,7 +829,7 @@ * Override with M201 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 } +#define DEFAULT_MAX_ACCELERATION { 500, 500, 100, 5000 } //#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 #if ENABLED(LIMITED_MAX_ACCEL_EDITING) @@ -841,9 +844,9 @@ * M204 R Retract Acceleration * M204 T Travel Acceleration */ -#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves +#define DEFAULT_ACCELERATION 500 // X, Y, Z and E acceleration for printing moves +#define DEFAULT_RETRACT_ACCELERATION 500 // E acceleration for retracts +#define DEFAULT_TRAVEL_ACCELERATION 500 // X, Y, Z acceleration for travel (non printing) moves /** * Default Jerk limits (mm/s) @@ -877,7 +880,7 @@ * https://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html */ #if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.013 // (mm) Distance from real junction edge + #define JUNCTION_DEVIATION_MM 0.08 // (mm) Distance from real junction edge #define JD_HANDLE_SMALL_SEGMENTS // Use curvature estimation instead of just the junction angle // for small segments (< 1mm) with large junction angles (> 135°). #endif @@ -1185,19 +1188,19 @@ // @section extruder #define DISABLE_E false // Disable the extruder when not stepping -#define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled +//#define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled // @section machine // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR false +#define INVERT_X_DIR true #define INVERT_Y_DIR true -#define INVERT_Z_DIR false +#define INVERT_Z_DIR true // @section extruder // For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR false +#define INVERT_E0_DIR true #define INVERT_E1_DIR false #define INVERT_E2_DIR false #define INVERT_E3_DIR false @@ -1225,15 +1228,15 @@ // Direction of endstops when homing; 1=MAX, -1=MIN // :[-1,1] -#define X_HOME_DIR -1 -#define Y_HOME_DIR -1 +#define X_HOME_DIR 1 +#define Y_HOME_DIR 1 #define Z_HOME_DIR -1 // @section machine // The size of the printable area -#define X_BED_SIZE 200 -#define Y_BED_SIZE 200 +#define X_BED_SIZE 220 +#define Y_BED_SIZE 220 // Travel limits (mm) after homing, corresponding to endstop positions. #define X_MIN_POS 0 @@ -1241,7 +1244,7 @@ #define Z_MIN_POS 0 #define X_MAX_POS X_BED_SIZE #define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 200 +#define Z_MAX_POS 300 /** * Software Endstops @@ -1595,7 +1598,7 @@ #endif // Homing speeds (mm/min) -#define HOMING_FEEDRATE_MM_M { (50*60), (50*60), (4*60) } +#define HOMING_FEEDRATE_MM_M { (20*60), (20*60), (4*60) } // Validate that endstops are triggered on homing moves #define VALIDATE_HOMING_ENDSTOPS @@ -1672,7 +1675,7 @@ * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) */ -//#define EEPROM_SETTINGS // Persistent storage with M500 and M501 +#define EEPROM_SETTINGS // Persistent storage with M500 and M501 //#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. #define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load @@ -1706,16 +1709,16 @@ // Preheat Constants - Up to 5 are supported without changes // #define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 180 -#define PREHEAT_1_TEMP_BED 70 +#define PREHEAT_1_TEMP_HOTEND 185 +#define PREHEAT_1_TEMP_BED 45 #define PREHEAT_1_TEMP_CHAMBER 35 -#define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 +#define PREHEAT_1_FAN_SPEED 255 // Value from 0 to 255 #define PREHEAT_2_LABEL "ABS" #define PREHEAT_2_TEMP_HOTEND 240 -#define PREHEAT_2_TEMP_BED 110 +#define PREHEAT_2_TEMP_BED 70 #define PREHEAT_2_TEMP_CHAMBER 35 -#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 +#define PREHEAT_2_FAN_SPEED 255 // Value from 0 to 255 /** * Nozzle Park @@ -1921,7 +1924,7 @@ * * :['JAPANESE', 'WESTERN', 'CYRILLIC'] */ -#define DISPLAY_CHARSET_HD44780 JAPANESE +#define DISPLAY_CHARSET_HD44780 WESTERN /** * Info Screen Style (0:Classic, 1:Průša) @@ -1936,7 +1939,7 @@ * SD Card support is disabled by default. If your controller has an SD slot, * you must uncomment the following option or it won't work. */ -//#define SDSUPPORT +#define SDSUPPORT /** * SD CARD: ENABLE CRC @@ -2014,7 +2017,7 @@ // If you have a speaker that can produce tones, enable it here. // By default Marlin assumes you have a buzzer with a fixed frequency. // -//#define SPEAKER +#define SPEAKER // // The duration and frequency for the UI feedback sound. @@ -2287,7 +2290,7 @@ // This is RAMPS-compatible using a single 10-pin connector. // (For CR-10 owners who want to replace the Melzi Creality board but retain the display) // -//#define CR10_STOCKDISPLAY +#define CR10_STOCKDISPLAY // // Ender-2 OEM display, a variant of the MKS_MINI_12864 diff --git a/config/examples/Creality/Ender-5 Pro/CrealityV1/Configuration_adv.h b/config/examples/Creality/Ender-5 Pro/CrealityV1/Configuration_adv.h index 5335fa012a..6f0c580aac 100644 --- a/config/examples/Creality/Ender-5 Pro/CrealityV1/Configuration_adv.h +++ b/config/examples/Creality/Ender-5 Pro/CrealityV1/Configuration_adv.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Creality/Ender-5 Pro/CrealityV1" + /** * Configuration_adv.h * @@ -741,7 +743,7 @@ //#define HOMING_BACKOFF_POST_MM { 2, 2, 2 } // (mm) Backoff from endstops after homing -//#define QUICK_HOME // If G28 contains XY do a diagonal move first +#define QUICK_HOME // If G28 contains XY do a diagonal move first //#define HOME_Y_BEFORE_X // If G28 contains XY home Y before X //#define HOME_Z_FIRST // Home Z first. Requires a Z-MIN endstop (not a probe). //#define CODEPENDENT_XY_HOMING // If X/Y can't home without homing Y/X first @@ -792,7 +794,7 @@ * differs, a mode set eeprom write will be completed at initialization. * Use the option below to force an eeprom write to a V3.1 probe regardless. */ - //#define BLTOUCH_SET_5V_MODE + #define BLTOUCH_SET_5V_MODE /** * Safety: Activate if connecting a probe with an unknown voltage mode. @@ -826,7 +828,7 @@ // Define probe X and Y positions for Z1, Z2 [, Z3 [, Z4]] // If not defined, probe limits will be used. // Override with 'M422 S X Y' - //#define Z_STEPPER_ALIGN_XY { { 10, 190 }, { 100, 10 }, { 190, 190 } } + //#define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } /** * Orientation for the automatically-calculated probe positions. @@ -867,7 +869,7 @@ // On a 300mm bed a 5% grade would give a misalignment of ~1.5cm #define G34_MAX_GRADE 5 // (%) Maximum incline that G34 will handle - #define Z_STEPPER_ALIGN_ITERATIONS 5 // Number of iterations to apply during alignment + #define Z_STEPPER_ALIGN_ITERATIONS 3 // Number of iterations to apply during alignment #define Z_STEPPER_ALIGN_ACC 0.02 // Stop iterating early if the accuracy is better than this #define RESTORE_LEVELING_AFTER_G34 // Restore leveling after G34 is done? // After G34, re-home Z (G28 Z) or just calculate it from the last probe heights? @@ -928,7 +930,7 @@ #define DEFAULT_STEPPER_DEACTIVE_TIME 120 #define DISABLE_INACTIVE_X true #define DISABLE_INACTIVE_Y true -#define DISABLE_INACTIVE_Z true // Set 'false' if the nozzle could fall onto your printed part! +#define DISABLE_INACTIVE_Z false // Set 'false' if the nozzle could fall onto your printed part! #define DISABLE_INACTIVE_E true // Default Minimum Feedrates for printing and travel moves @@ -1175,7 +1177,7 @@ #endif // Include a page of printer information in the LCD Main Menu - //#define LCD_INFO_MENU + #define LCD_INFO_MENU #if ENABLED(LCD_INFO_MENU) //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages #endif @@ -1229,7 +1231,7 @@ #endif // Scroll a longer status message into view - //#define STATUS_MESSAGE_SCROLLING + #define STATUS_MESSAGE_SCROLLING // On the Info Screen, display XY with one decimal place when possible //#define LCD_DECIMAL_SMALL_XY @@ -1384,7 +1386,7 @@ //#define LONG_FILENAME_HOST_SUPPORT // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES + #define SCROLL_LONG_FILENAMES // Leave the heaters on after Stop Print (not recommended!) //#define SD_ABORT_NO_COOLDOWN @@ -1790,7 +1792,7 @@ * * Warning: Does not respect endstops! */ -//#define BABYSTEPPING +#define BABYSTEPPING #if ENABLED(BABYSTEPPING) //#define INTEGRATED_BABYSTEPPING // EXPERIMENTAL integration of babystepping into the Stepper ISR //#define BABYSTEP_WITHOUT_HOMING @@ -1801,7 +1803,7 @@ #define BABYSTEP_MULTIPLICATOR_Z 1 // (steps or mm) Steps or millimeter distance for each Z babystep #define BABYSTEP_MULTIPLICATOR_XY 1 // (steps or mm) Steps or millimeter distance for each XY babystep - //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. + #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. // Note: Extra time may be added to mitigate controller latency. @@ -2493,7 +2495,7 @@ #define INTERPOLATE true #if AXIS_IS_TMC(X) - #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. + #define X_CURRENT 580 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for sensorless homing #define X_MICROSTEPS 16 // 0..256 #define X_RSENSE 0.11 @@ -2511,7 +2513,7 @@ #endif #if AXIS_IS_TMC(Y) - #define Y_CURRENT 800 + #define Y_CURRENT 650 #define Y_CURRENT_HOME Y_CURRENT #define Y_MICROSTEPS 16 #define Y_RSENSE 0.11 @@ -2529,7 +2531,7 @@ #endif #if AXIS_IS_TMC(Z) - #define Z_CURRENT 800 + #define Z_CURRENT 580 #define Z_CURRENT_HOME Z_CURRENT #define Z_MICROSTEPS 16 #define Z_RSENSE 0.11 @@ -2565,7 +2567,7 @@ #endif #if AXIS_IS_TMC(E0) - #define E0_CURRENT 800 + #define E0_CURRENT 650 #define E0_MICROSTEPS 16 #define E0_RSENSE 0.11 #define E0_CHAIN_POS -1 @@ -2719,7 +2721,7 @@ * Define your own with: * { , , hysteresis_start[1..8] } */ - #define CHOPPER_TIMING CHOPPER_DEFAULT_12V // All axes (override below) + #define CHOPPER_TIMING CHOPPER_DEFAULT_24V // All axes (override below) //#define CHOPPER_TIMING_X CHOPPER_TIMING // For X Axes (override below) //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X //#define CHOPPER_TIMING_Y CHOPPER_TIMING // For Y Axes (override below) diff --git a/config/examples/Creality/Ender-5 Pro/CrealityV422/Configuration.h b/config/examples/Creality/Ender-5 Pro/CrealityV422/Configuration.h index 78c2dc9160..4cd7be2668 100644 --- a/config/examples/Creality/Ender-5 Pro/CrealityV422/Configuration.h +++ b/config/examples/Creality/Ender-5 Pro/CrealityV422/Configuration.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Creality/Ender-5 Pro/CrealityV422" + /** * Configuration.h * @@ -69,7 +71,7 @@ // @section info // Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes. +#define STRING_CONFIG_H_AUTHOR "(Dust, Ender-5 Pro)" // Who made the changes. //#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) /** @@ -87,10 +89,10 @@ #define SHOW_BOOTSCREEN // Show the bitmap in Marlin/_Bootscreen.h on startup. -//#define SHOW_CUSTOM_BOOTSCREEN +#define SHOW_CUSTOM_BOOTSCREEN // Show the bitmap in Marlin/_Statusscreen.h on the status screen. -//#define CUSTOM_STATUS_SCREEN_IMAGE +#define CUSTOM_STATUS_SCREEN_IMAGE // @section machine @@ -102,7 +104,7 @@ * * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] */ -#define SERIAL_PORT 0 +#define SERIAL_PORT 1 /** * Select a secondary serial port on the board to use for communication with the host. @@ -127,18 +129,18 @@ * * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ -#define BAUDRATE 250000 +#define BAUDRATE 115200 // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH // Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_RAMPS_14_EFB + #define MOTHERBOARD BOARD_CREALITY_V4 #endif // Name displayed in the LCD "Ready" message and Info menu -//#define CUSTOM_MACHINE_NAME "3D Printer" +#define CUSTOM_MACHINE_NAME "Ender-5 Pro 4.2.2" // Printer's unique ID, used by some programs to differentiate between machines. // Choose your own or use a service like https://www.uuidgenerator.net/version4 @@ -424,7 +426,7 @@ #define TEMP_SENSOR_5 0 #define TEMP_SENSOR_6 0 #define TEMP_SENSOR_7 0 -#define TEMP_SENSOR_BED 0 +#define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 #define TEMP_SENSOR_COOLER 0 @@ -480,7 +482,7 @@ #define HEATER_5_MAXTEMP 275 #define HEATER_6_MAXTEMP 275 #define HEATER_7_MAXTEMP 275 -#define BED_MAXTEMP 150 +#define BED_MAXTEMP 125 #define CHAMBER_MAXTEMP 60 /** @@ -505,21 +507,22 @@ #define PID_K1 0.95 // Smoothing factor within any PID loop #if ENABLED(PIDTEMP) - //#define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) - //#define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) + #define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) + #define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) // Set/get with gcode: M301 E[extruder number, 0-2] + // Creality Ender-5 Pro #if ENABLED(PID_PARAMS_PER_HOTEND) // Specify between 1 and HOTENDS values per array. // If fewer than EXTRUDER values are provided, the last element will be repeated. - #define DEFAULT_Kp_LIST { 22.20, 22.20 } - #define DEFAULT_Ki_LIST { 1.08, 1.08 } - #define DEFAULT_Kd_LIST { 114.00, 114.00 } + #define DEFAULT_Kp_LIST { 21.73, 21.73 } + #define DEFAULT_Ki_LIST { 1.54, 1.54 } + #define DEFAULT_Kd_LIST { 76.55, 76.55 } #else - #define DEFAULT_Kp 22.20 - #define DEFAULT_Ki 1.08 - #define DEFAULT_Kd 114.00 + #define DEFAULT_Kp 21.73 + #define DEFAULT_Ki 1.54 + #define DEFAULT_Kd 76.55 #endif #endif // PIDTEMP @@ -683,11 +686,11 @@ // Specify here all the endstop connectors that are connected to any endstop or probe. // Almost all printers will be using one per axis. Probes will use one or more of the // extra connectors. Leave undefined any used for non-endstop and non-probe purposes. -#define USE_XMIN_PLUG -#define USE_YMIN_PLUG +//#define USE_XMIN_PLUG +//#define USE_YMIN_PLUG #define USE_ZMIN_PLUG -//#define USE_XMAX_PLUG -//#define USE_YMAX_PLUG +#define USE_XMAX_PLUG +#define USE_YMAX_PLUG //#define USE_ZMAX_PLUG // Enable pullup for all endstops to prevent a floating state @@ -743,15 +746,15 @@ * TMC5130, TMC5130_STANDALONE, TMC5160, TMC5160_STANDALONE * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'L6474', 'POWERSTEP01', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2160', 'TMC2160_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC2209', 'TMC2209_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE', 'TMC5160', 'TMC5160_STANDALONE'] */ -#define X_DRIVER_TYPE A4988 -#define Y_DRIVER_TYPE A4988 -#define Z_DRIVER_TYPE A4988 +#define X_DRIVER_TYPE TMC2208_STANDALONE +#define Y_DRIVER_TYPE TMC2208_STANDALONE +#define Z_DRIVER_TYPE TMC2208_STANDALONE //#define X2_DRIVER_TYPE A4988 //#define Y2_DRIVER_TYPE A4988 //#define Z2_DRIVER_TYPE A4988 //#define Z3_DRIVER_TYPE A4988 //#define Z4_DRIVER_TYPE A4988 -#define E0_DRIVER_TYPE A4988 +#define E0_DRIVER_TYPE TMC2208_STANDALONE //#define E1_DRIVER_TYPE A4988 //#define E2_DRIVER_TYPE A4988 //#define E3_DRIVER_TYPE A4988 @@ -806,14 +809,14 @@ * Override with M92 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 500 } +#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 800, 93 } /** * Default Max Feed Rate (mm/s) * Override with M203 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 } +#define DEFAULT_MAX_FEEDRATE { 500, 500, 5, 25 } //#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 #if ENABLED(LIMITED_MAX_FR_EDITING) @@ -826,7 +829,7 @@ * Override with M201 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 } +#define DEFAULT_MAX_ACCELERATION { 500, 500, 100, 5000 } //#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 #if ENABLED(LIMITED_MAX_ACCEL_EDITING) @@ -841,9 +844,9 @@ * M204 R Retract Acceleration * M204 T Travel Acceleration */ -#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves +#define DEFAULT_ACCELERATION 500 // X, Y, Z and E acceleration for printing moves +#define DEFAULT_RETRACT_ACCELERATION 500 // E acceleration for retracts +#define DEFAULT_TRAVEL_ACCELERATION 500 // X, Y, Z acceleration for travel (non printing) moves /** * Default Jerk limits (mm/s) @@ -877,7 +880,7 @@ * https://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html */ #if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.013 // (mm) Distance from real junction edge + #define JUNCTION_DEVIATION_MM 0.08 // (mm) Distance from real junction edge #define JD_HANDLE_SMALL_SEGMENTS // Use curvature estimation instead of just the junction angle // for small segments (< 1mm) with large junction angles (> 135°). #endif @@ -1185,13 +1188,13 @@ // @section extruder #define DISABLE_E false // Disable the extruder when not stepping -#define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled +//#define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled // @section machine // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR false -#define INVERT_Y_DIR true +#define INVERT_Y_DIR false #define INVERT_Z_DIR false // @section extruder @@ -1225,15 +1228,15 @@ // Direction of endstops when homing; 1=MAX, -1=MIN // :[-1,1] -#define X_HOME_DIR -1 -#define Y_HOME_DIR -1 +#define X_HOME_DIR 1 +#define Y_HOME_DIR 1 #define Z_HOME_DIR -1 // @section machine // The size of the printable area -#define X_BED_SIZE 200 -#define Y_BED_SIZE 200 +#define X_BED_SIZE 220 +#define Y_BED_SIZE 220 // Travel limits (mm) after homing, corresponding to endstop positions. #define X_MIN_POS 0 @@ -1241,7 +1244,7 @@ #define Z_MIN_POS 0 #define X_MAX_POS X_BED_SIZE #define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 200 +#define Z_MAX_POS 300 /** * Software Endstops @@ -1595,7 +1598,7 @@ #endif // Homing speeds (mm/min) -#define HOMING_FEEDRATE_MM_M { (50*60), (50*60), (4*60) } +#define HOMING_FEEDRATE_MM_M { (20*60), (20*60), (4*60) } // Validate that endstops are triggered on homing moves #define VALIDATE_HOMING_ENDSTOPS @@ -1672,7 +1675,7 @@ * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) */ -//#define EEPROM_SETTINGS // Persistent storage with M500 and M501 +#define EEPROM_SETTINGS // Persistent storage with M500 and M501 //#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. #define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load @@ -1706,16 +1709,16 @@ // Preheat Constants - Up to 5 are supported without changes // #define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 180 -#define PREHEAT_1_TEMP_BED 70 +#define PREHEAT_1_TEMP_HOTEND 185 +#define PREHEAT_1_TEMP_BED 45 #define PREHEAT_1_TEMP_CHAMBER 35 -#define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 +#define PREHEAT_1_FAN_SPEED 255 // Value from 0 to 255 #define PREHEAT_2_LABEL "ABS" #define PREHEAT_2_TEMP_HOTEND 240 -#define PREHEAT_2_TEMP_BED 110 +#define PREHEAT_2_TEMP_BED 70 #define PREHEAT_2_TEMP_CHAMBER 35 -#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 +#define PREHEAT_2_FAN_SPEED 255 // Value from 0 to 255 /** * Nozzle Park @@ -1921,7 +1924,7 @@ * * :['JAPANESE', 'WESTERN', 'CYRILLIC'] */ -#define DISPLAY_CHARSET_HD44780 JAPANESE +#define DISPLAY_CHARSET_HD44780 WESTERN /** * Info Screen Style (0:Classic, 1:Průša) @@ -1936,7 +1939,7 @@ * SD Card support is disabled by default. If your controller has an SD slot, * you must uncomment the following option or it won't work. */ -//#define SDSUPPORT +#define SDSUPPORT /** * SD CARD: ENABLE CRC @@ -2014,7 +2017,7 @@ // If you have a speaker that can produce tones, enable it here. // By default Marlin assumes you have a buzzer with a fixed frequency. // -//#define SPEAKER +#define SPEAKER // // The duration and frequency for the UI feedback sound. @@ -2287,7 +2290,10 @@ // This is RAMPS-compatible using a single 10-pin connector. // (For CR-10 owners who want to replace the Melzi Creality board but retain the display) // -//#define CR10_STOCKDISPLAY +#define CR10_STOCKDISPLAY +#if ENABLED(CR10_STOCKDISPLAY) + #define RET6_12864_LCD // Specific to the SoC (can either be RET / VET) +#endif // // Ender-2 OEM display, a variant of the MKS_MINI_12864 diff --git a/config/examples/Creality/Ender-5 Pro/CrealityV422/Configuration_adv.h b/config/examples/Creality/Ender-5 Pro/CrealityV422/Configuration_adv.h index 5335fa012a..29c5dded74 100644 --- a/config/examples/Creality/Ender-5 Pro/CrealityV422/Configuration_adv.h +++ b/config/examples/Creality/Ender-5 Pro/CrealityV422/Configuration_adv.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Creality/Ender-5 Pro/CrealityV422" + /** * Configuration_adv.h * @@ -741,7 +743,7 @@ //#define HOMING_BACKOFF_POST_MM { 2, 2, 2 } // (mm) Backoff from endstops after homing -//#define QUICK_HOME // If G28 contains XY do a diagonal move first +#define QUICK_HOME // If G28 contains XY do a diagonal move first //#define HOME_Y_BEFORE_X // If G28 contains XY home Y before X //#define HOME_Z_FIRST // Home Z first. Requires a Z-MIN endstop (not a probe). //#define CODEPENDENT_XY_HOMING // If X/Y can't home without homing Y/X first @@ -792,7 +794,7 @@ * differs, a mode set eeprom write will be completed at initialization. * Use the option below to force an eeprom write to a V3.1 probe regardless. */ - //#define BLTOUCH_SET_5V_MODE + #define BLTOUCH_SET_5V_MODE /** * Safety: Activate if connecting a probe with an unknown voltage mode. @@ -826,7 +828,7 @@ // Define probe X and Y positions for Z1, Z2 [, Z3 [, Z4]] // If not defined, probe limits will be used. // Override with 'M422 S X Y' - //#define Z_STEPPER_ALIGN_XY { { 10, 190 }, { 100, 10 }, { 190, 190 } } + //#define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } /** * Orientation for the automatically-calculated probe positions. @@ -867,7 +869,7 @@ // On a 300mm bed a 5% grade would give a misalignment of ~1.5cm #define G34_MAX_GRADE 5 // (%) Maximum incline that G34 will handle - #define Z_STEPPER_ALIGN_ITERATIONS 5 // Number of iterations to apply during alignment + #define Z_STEPPER_ALIGN_ITERATIONS 3 // Number of iterations to apply during alignment #define Z_STEPPER_ALIGN_ACC 0.02 // Stop iterating early if the accuracy is better than this #define RESTORE_LEVELING_AFTER_G34 // Restore leveling after G34 is done? // After G34, re-home Z (G28 Z) or just calculate it from the last probe heights? @@ -928,7 +930,7 @@ #define DEFAULT_STEPPER_DEACTIVE_TIME 120 #define DISABLE_INACTIVE_X true #define DISABLE_INACTIVE_Y true -#define DISABLE_INACTIVE_Z true // Set 'false' if the nozzle could fall onto your printed part! +#define DISABLE_INACTIVE_Z false // Set 'false' if the nozzle could fall onto your printed part! #define DISABLE_INACTIVE_E true // Default Minimum Feedrates for printing and travel moves @@ -1175,7 +1177,7 @@ #endif // Include a page of printer information in the LCD Main Menu - //#define LCD_INFO_MENU + #define LCD_INFO_MENU #if ENABLED(LCD_INFO_MENU) //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages #endif @@ -1229,7 +1231,7 @@ #endif // Scroll a longer status message into view - //#define STATUS_MESSAGE_SCROLLING + #define STATUS_MESSAGE_SCROLLING // On the Info Screen, display XY with one decimal place when possible //#define LCD_DECIMAL_SMALL_XY @@ -1384,7 +1386,7 @@ //#define LONG_FILENAME_HOST_SUPPORT // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES + #define SCROLL_LONG_FILENAMES // Leave the heaters on after Stop Print (not recommended!) //#define SD_ABORT_NO_COOLDOWN @@ -1790,7 +1792,7 @@ * * Warning: Does not respect endstops! */ -//#define BABYSTEPPING +#define BABYSTEPPING #if ENABLED(BABYSTEPPING) //#define INTEGRATED_BABYSTEPPING // EXPERIMENTAL integration of babystepping into the Stepper ISR //#define BABYSTEP_WITHOUT_HOMING @@ -1801,7 +1803,7 @@ #define BABYSTEP_MULTIPLICATOR_Z 1 // (steps or mm) Steps or millimeter distance for each Z babystep #define BABYSTEP_MULTIPLICATOR_XY 1 // (steps or mm) Steps or millimeter distance for each XY babystep - //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. + #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. // Note: Extra time may be added to mitigate controller latency. @@ -2493,7 +2495,7 @@ #define INTERPOLATE true #if AXIS_IS_TMC(X) - #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. + #define X_CURRENT 580 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for sensorless homing #define X_MICROSTEPS 16 // 0..256 #define X_RSENSE 0.11 @@ -2511,7 +2513,7 @@ #endif #if AXIS_IS_TMC(Y) - #define Y_CURRENT 800 + #define Y_CURRENT 650 #define Y_CURRENT_HOME Y_CURRENT #define Y_MICROSTEPS 16 #define Y_RSENSE 0.11 @@ -2529,7 +2531,7 @@ #endif #if AXIS_IS_TMC(Z) - #define Z_CURRENT 800 + #define Z_CURRENT 580 #define Z_CURRENT_HOME Z_CURRENT #define Z_MICROSTEPS 16 #define Z_RSENSE 0.11 @@ -2565,7 +2567,7 @@ #endif #if AXIS_IS_TMC(E0) - #define E0_CURRENT 800 + #define E0_CURRENT 650 #define E0_MICROSTEPS 16 #define E0_RSENSE 0.11 #define E0_CHAIN_POS -1 @@ -2719,7 +2721,7 @@ * Define your own with: * { , , hysteresis_start[1..8] } */ - #define CHOPPER_TIMING CHOPPER_DEFAULT_12V // All axes (override below) + #define CHOPPER_TIMING CHOPPER_DEFAULT_24V // All axes (override below) //#define CHOPPER_TIMING_X CHOPPER_TIMING // For X Axes (override below) //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X //#define CHOPPER_TIMING_Y CHOPPER_TIMING // For Y Axes (override below) @@ -3242,7 +3244,7 @@ * This allows the laser to keep in perfect sync with the planner and removes * the powerup/down delay since lasers require negligible time. */ - //#define LASER_POWER_INLINE + #define LASER_POWER_INLINE #if ENABLED(LASER_POWER_INLINE) /** diff --git a/config/examples/Creality/Ender-5 Pro/CrealityV427/Configuration.h b/config/examples/Creality/Ender-5 Pro/CrealityV427/Configuration.h index 78c2dc9160..851a4670ce 100644 --- a/config/examples/Creality/Ender-5 Pro/CrealityV427/Configuration.h +++ b/config/examples/Creality/Ender-5 Pro/CrealityV427/Configuration.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Creality/Ender-5 Pro/CrealityV427" + /** * Configuration.h * @@ -69,7 +71,7 @@ // @section info // Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes. +#define STRING_CONFIG_H_AUTHOR "(Dust, Ender-5 Pro)" // Who made the changes. //#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) /** @@ -87,10 +89,10 @@ #define SHOW_BOOTSCREEN // Show the bitmap in Marlin/_Bootscreen.h on startup. -//#define SHOW_CUSTOM_BOOTSCREEN +#define SHOW_CUSTOM_BOOTSCREEN // Show the bitmap in Marlin/_Statusscreen.h on the status screen. -//#define CUSTOM_STATUS_SCREEN_IMAGE +#define CUSTOM_STATUS_SCREEN_IMAGE // @section machine @@ -102,7 +104,7 @@ * * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] */ -#define SERIAL_PORT 0 +#define SERIAL_PORT 1 /** * Select a secondary serial port on the board to use for communication with the host. @@ -127,18 +129,18 @@ * * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ -#define BAUDRATE 250000 +#define BAUDRATE 115200 // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH // Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_RAMPS_14_EFB + #define MOTHERBOARD BOARD_CREALITY_V427 #endif // Name displayed in the LCD "Ready" message and Info menu -//#define CUSTOM_MACHINE_NAME "3D Printer" +#define CUSTOM_MACHINE_NAME "Ender-5 Pro 4.2.7" // Printer's unique ID, used by some programs to differentiate between machines. // Choose your own or use a service like https://www.uuidgenerator.net/version4 @@ -424,7 +426,7 @@ #define TEMP_SENSOR_5 0 #define TEMP_SENSOR_6 0 #define TEMP_SENSOR_7 0 -#define TEMP_SENSOR_BED 0 +#define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 #define TEMP_SENSOR_COOLER 0 @@ -480,7 +482,7 @@ #define HEATER_5_MAXTEMP 275 #define HEATER_6_MAXTEMP 275 #define HEATER_7_MAXTEMP 275 -#define BED_MAXTEMP 150 +#define BED_MAXTEMP 125 #define CHAMBER_MAXTEMP 60 /** @@ -505,21 +507,22 @@ #define PID_K1 0.95 // Smoothing factor within any PID loop #if ENABLED(PIDTEMP) - //#define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) - //#define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) + #define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) + #define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) // Set/get with gcode: M301 E[extruder number, 0-2] + // Creality Ender-5 Pro #if ENABLED(PID_PARAMS_PER_HOTEND) // Specify between 1 and HOTENDS values per array. // If fewer than EXTRUDER values are provided, the last element will be repeated. - #define DEFAULT_Kp_LIST { 22.20, 22.20 } - #define DEFAULT_Ki_LIST { 1.08, 1.08 } - #define DEFAULT_Kd_LIST { 114.00, 114.00 } + #define DEFAULT_Kp_LIST { 21.73, 21.73 } + #define DEFAULT_Ki_LIST { 1.54, 1.54 } + #define DEFAULT_Kd_LIST { 76.55, 76.55 } #else - #define DEFAULT_Kp 22.20 - #define DEFAULT_Ki 1.08 - #define DEFAULT_Kd 114.00 + #define DEFAULT_Kp 21.73 + #define DEFAULT_Ki 1.54 + #define DEFAULT_Kd 76.55 #endif #endif // PIDTEMP @@ -683,11 +686,11 @@ // Specify here all the endstop connectors that are connected to any endstop or probe. // Almost all printers will be using one per axis. Probes will use one or more of the // extra connectors. Leave undefined any used for non-endstop and non-probe purposes. -#define USE_XMIN_PLUG -#define USE_YMIN_PLUG +//#define USE_XMIN_PLUG +//#define USE_YMIN_PLUG #define USE_ZMIN_PLUG -//#define USE_XMAX_PLUG -//#define USE_YMAX_PLUG +#define USE_XMAX_PLUG +#define USE_YMAX_PLUG //#define USE_ZMAX_PLUG // Enable pullup for all endstops to prevent a floating state @@ -743,15 +746,15 @@ * TMC5130, TMC5130_STANDALONE, TMC5160, TMC5160_STANDALONE * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'L6474', 'POWERSTEP01', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2160', 'TMC2160_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC2209', 'TMC2209_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE', 'TMC5160', 'TMC5160_STANDALONE'] */ -#define X_DRIVER_TYPE A4988 -#define Y_DRIVER_TYPE A4988 -#define Z_DRIVER_TYPE A4988 +#define X_DRIVER_TYPE TMC2208_STANDALONE +#define Y_DRIVER_TYPE TMC2208_STANDALONE +#define Z_DRIVER_TYPE TMC2208_STANDALONE //#define X2_DRIVER_TYPE A4988 //#define Y2_DRIVER_TYPE A4988 //#define Z2_DRIVER_TYPE A4988 //#define Z3_DRIVER_TYPE A4988 //#define Z4_DRIVER_TYPE A4988 -#define E0_DRIVER_TYPE A4988 +#define E0_DRIVER_TYPE TMC2208_STANDALONE //#define E1_DRIVER_TYPE A4988 //#define E2_DRIVER_TYPE A4988 //#define E3_DRIVER_TYPE A4988 @@ -806,14 +809,14 @@ * Override with M92 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 500 } +#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 800, 93 } /** * Default Max Feed Rate (mm/s) * Override with M203 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 } +#define DEFAULT_MAX_FEEDRATE { 500, 500, 5, 25 } //#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 #if ENABLED(LIMITED_MAX_FR_EDITING) @@ -826,7 +829,7 @@ * Override with M201 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 } +#define DEFAULT_MAX_ACCELERATION { 500, 500, 100, 5000 } //#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 #if ENABLED(LIMITED_MAX_ACCEL_EDITING) @@ -841,9 +844,9 @@ * M204 R Retract Acceleration * M204 T Travel Acceleration */ -#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves +#define DEFAULT_ACCELERATION 500 // X, Y, Z and E acceleration for printing moves +#define DEFAULT_RETRACT_ACCELERATION 500 // E acceleration for retracts +#define DEFAULT_TRAVEL_ACCELERATION 500 // X, Y, Z acceleration for travel (non printing) moves /** * Default Jerk limits (mm/s) @@ -877,7 +880,7 @@ * https://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html */ #if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.013 // (mm) Distance from real junction edge + #define JUNCTION_DEVIATION_MM 0.08 // (mm) Distance from real junction edge #define JD_HANDLE_SMALL_SEGMENTS // Use curvature estimation instead of just the junction angle // for small segments (< 1mm) with large junction angles (> 135°). #endif @@ -1185,13 +1188,13 @@ // @section extruder #define DISABLE_E false // Disable the extruder when not stepping -#define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled +//#define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled // @section machine // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR false -#define INVERT_Y_DIR true +#define INVERT_Y_DIR false #define INVERT_Z_DIR false // @section extruder @@ -1225,15 +1228,15 @@ // Direction of endstops when homing; 1=MAX, -1=MIN // :[-1,1] -#define X_HOME_DIR -1 -#define Y_HOME_DIR -1 +#define X_HOME_DIR 1 +#define Y_HOME_DIR 1 #define Z_HOME_DIR -1 // @section machine // The size of the printable area -#define X_BED_SIZE 200 -#define Y_BED_SIZE 200 +#define X_BED_SIZE 220 +#define Y_BED_SIZE 220 // Travel limits (mm) after homing, corresponding to endstop positions. #define X_MIN_POS 0 @@ -1241,7 +1244,7 @@ #define Z_MIN_POS 0 #define X_MAX_POS X_BED_SIZE #define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 200 +#define Z_MAX_POS 300 /** * Software Endstops @@ -1595,7 +1598,7 @@ #endif // Homing speeds (mm/min) -#define HOMING_FEEDRATE_MM_M { (50*60), (50*60), (4*60) } +#define HOMING_FEEDRATE_MM_M { (20*60), (20*60), (4*60) } // Validate that endstops are triggered on homing moves #define VALIDATE_HOMING_ENDSTOPS @@ -1672,7 +1675,7 @@ * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) */ -//#define EEPROM_SETTINGS // Persistent storage with M500 and M501 +#define EEPROM_SETTINGS // Persistent storage with M500 and M501 //#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. #define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load @@ -1706,16 +1709,16 @@ // Preheat Constants - Up to 5 are supported without changes // #define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 180 -#define PREHEAT_1_TEMP_BED 70 +#define PREHEAT_1_TEMP_HOTEND 185 +#define PREHEAT_1_TEMP_BED 45 #define PREHEAT_1_TEMP_CHAMBER 35 -#define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 +#define PREHEAT_1_FAN_SPEED 255 // Value from 0 to 255 #define PREHEAT_2_LABEL "ABS" #define PREHEAT_2_TEMP_HOTEND 240 -#define PREHEAT_2_TEMP_BED 110 +#define PREHEAT_2_TEMP_BED 70 #define PREHEAT_2_TEMP_CHAMBER 35 -#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 +#define PREHEAT_2_FAN_SPEED 255 // Value from 0 to 255 /** * Nozzle Park @@ -1921,7 +1924,7 @@ * * :['JAPANESE', 'WESTERN', 'CYRILLIC'] */ -#define DISPLAY_CHARSET_HD44780 JAPANESE +#define DISPLAY_CHARSET_HD44780 WESTERN /** * Info Screen Style (0:Classic, 1:Průša) @@ -1936,7 +1939,7 @@ * SD Card support is disabled by default. If your controller has an SD slot, * you must uncomment the following option or it won't work. */ -//#define SDSUPPORT +#define SDSUPPORT /** * SD CARD: ENABLE CRC @@ -2014,7 +2017,7 @@ // If you have a speaker that can produce tones, enable it here. // By default Marlin assumes you have a buzzer with a fixed frequency. // -//#define SPEAKER +#define SPEAKER // // The duration and frequency for the UI feedback sound. @@ -2287,7 +2290,10 @@ // This is RAMPS-compatible using a single 10-pin connector. // (For CR-10 owners who want to replace the Melzi Creality board but retain the display) // -//#define CR10_STOCKDISPLAY +#define CR10_STOCKDISPLAY +#if ENABLED(CR10_STOCKDISPLAY) + #define RET6_12864_LCD // Specific to the SoC (can either be RET / VET) +#endif // // Ender-2 OEM display, a variant of the MKS_MINI_12864 diff --git a/config/examples/Creality/Ender-5 Pro/CrealityV427/Configuration_adv.h b/config/examples/Creality/Ender-5 Pro/CrealityV427/Configuration_adv.h index 5335fa012a..45078290ab 100644 --- a/config/examples/Creality/Ender-5 Pro/CrealityV427/Configuration_adv.h +++ b/config/examples/Creality/Ender-5 Pro/CrealityV427/Configuration_adv.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Creality/Ender-5 Pro/CrealityV427" + /** * Configuration_adv.h * @@ -741,7 +743,7 @@ //#define HOMING_BACKOFF_POST_MM { 2, 2, 2 } // (mm) Backoff from endstops after homing -//#define QUICK_HOME // If G28 contains XY do a diagonal move first +#define QUICK_HOME // If G28 contains XY do a diagonal move first //#define HOME_Y_BEFORE_X // If G28 contains XY home Y before X //#define HOME_Z_FIRST // Home Z first. Requires a Z-MIN endstop (not a probe). //#define CODEPENDENT_XY_HOMING // If X/Y can't home without homing Y/X first @@ -792,7 +794,7 @@ * differs, a mode set eeprom write will be completed at initialization. * Use the option below to force an eeprom write to a V3.1 probe regardless. */ - //#define BLTOUCH_SET_5V_MODE + #define BLTOUCH_SET_5V_MODE /** * Safety: Activate if connecting a probe with an unknown voltage mode. @@ -826,7 +828,7 @@ // Define probe X and Y positions for Z1, Z2 [, Z3 [, Z4]] // If not defined, probe limits will be used. // Override with 'M422 S X Y' - //#define Z_STEPPER_ALIGN_XY { { 10, 190 }, { 100, 10 }, { 190, 190 } } + //#define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } /** * Orientation for the automatically-calculated probe positions. @@ -867,7 +869,7 @@ // On a 300mm bed a 5% grade would give a misalignment of ~1.5cm #define G34_MAX_GRADE 5 // (%) Maximum incline that G34 will handle - #define Z_STEPPER_ALIGN_ITERATIONS 5 // Number of iterations to apply during alignment + #define Z_STEPPER_ALIGN_ITERATIONS 3 // Number of iterations to apply during alignment #define Z_STEPPER_ALIGN_ACC 0.02 // Stop iterating early if the accuracy is better than this #define RESTORE_LEVELING_AFTER_G34 // Restore leveling after G34 is done? // After G34, re-home Z (G28 Z) or just calculate it from the last probe heights? @@ -928,7 +930,7 @@ #define DEFAULT_STEPPER_DEACTIVE_TIME 120 #define DISABLE_INACTIVE_X true #define DISABLE_INACTIVE_Y true -#define DISABLE_INACTIVE_Z true // Set 'false' if the nozzle could fall onto your printed part! +#define DISABLE_INACTIVE_Z false // Set 'false' if the nozzle could fall onto your printed part! #define DISABLE_INACTIVE_E true // Default Minimum Feedrates for printing and travel moves @@ -1175,7 +1177,7 @@ #endif // Include a page of printer information in the LCD Main Menu - //#define LCD_INFO_MENU + #define LCD_INFO_MENU #if ENABLED(LCD_INFO_MENU) //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages #endif @@ -1229,7 +1231,7 @@ #endif // Scroll a longer status message into view - //#define STATUS_MESSAGE_SCROLLING + #define STATUS_MESSAGE_SCROLLING // On the Info Screen, display XY with one decimal place when possible //#define LCD_DECIMAL_SMALL_XY @@ -1384,7 +1386,7 @@ //#define LONG_FILENAME_HOST_SUPPORT // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES + #define SCROLL_LONG_FILENAMES // Leave the heaters on after Stop Print (not recommended!) //#define SD_ABORT_NO_COOLDOWN @@ -1790,7 +1792,7 @@ * * Warning: Does not respect endstops! */ -//#define BABYSTEPPING +#define BABYSTEPPING #if ENABLED(BABYSTEPPING) //#define INTEGRATED_BABYSTEPPING // EXPERIMENTAL integration of babystepping into the Stepper ISR //#define BABYSTEP_WITHOUT_HOMING @@ -1801,7 +1803,7 @@ #define BABYSTEP_MULTIPLICATOR_Z 1 // (steps or mm) Steps or millimeter distance for each Z babystep #define BABYSTEP_MULTIPLICATOR_XY 1 // (steps or mm) Steps or millimeter distance for each XY babystep - //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. + #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. // Note: Extra time may be added to mitigate controller latency. @@ -2493,7 +2495,7 @@ #define INTERPOLATE true #if AXIS_IS_TMC(X) - #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. + #define X_CURRENT 580 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for sensorless homing #define X_MICROSTEPS 16 // 0..256 #define X_RSENSE 0.11 @@ -2511,7 +2513,7 @@ #endif #if AXIS_IS_TMC(Y) - #define Y_CURRENT 800 + #define Y_CURRENT 650 #define Y_CURRENT_HOME Y_CURRENT #define Y_MICROSTEPS 16 #define Y_RSENSE 0.11 @@ -2529,7 +2531,7 @@ #endif #if AXIS_IS_TMC(Z) - #define Z_CURRENT 800 + #define Z_CURRENT 580 #define Z_CURRENT_HOME Z_CURRENT #define Z_MICROSTEPS 16 #define Z_RSENSE 0.11 @@ -2565,7 +2567,7 @@ #endif #if AXIS_IS_TMC(E0) - #define E0_CURRENT 800 + #define E0_CURRENT 650 #define E0_MICROSTEPS 16 #define E0_RSENSE 0.11 #define E0_CHAIN_POS -1 @@ -2719,7 +2721,7 @@ * Define your own with: * { , , hysteresis_start[1..8] } */ - #define CHOPPER_TIMING CHOPPER_DEFAULT_12V // All axes (override below) + #define CHOPPER_TIMING CHOPPER_DEFAULT_24V // All axes (override below) //#define CHOPPER_TIMING_X CHOPPER_TIMING // For X Axes (override below) //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X //#define CHOPPER_TIMING_Y CHOPPER_TIMING // For Y Axes (override below) diff --git a/config/examples/Creality/Ender-5/BigTreeTech SKR 1.4 Turbo (TMC2209)/Configuration.h b/config/examples/Creality/Ender-5/BigTreeTech SKR 1.4 Turbo (TMC2209)/Configuration.h index 78c2dc9160..424f2717c1 100644 --- a/config/examples/Creality/Ender-5/BigTreeTech SKR 1.4 Turbo (TMC2209)/Configuration.h +++ b/config/examples/Creality/Ender-5/BigTreeTech SKR 1.4 Turbo (TMC2209)/Configuration.h @@ -21,6 +21,14 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Creality/Ender-5/BigTreeTech SKR 1.4 Turbo (TMC2209)" + +//#define E3D // Enable for the E3D all metal hotend. +#define E3D_Extreme // Enable to print at over 285°C. Strongly discouraged by E3D but I neeeded it briefly. They say a little over isn't too risky but should not be done long term. +#define chamber // Enable for Heated Chamber. Thermistor should be connected to TEMP-E1, Heater to the port next to the bed heater (with the hotend heatsink fan moved to an always-on pin). +#define TMC2209_Enabled // Enable for TMC2209 drivers. +#define SKR_14_Turbo // Enable for the SKR 1.4 turbo. + /** * Configuration.h * @@ -69,7 +77,7 @@ // @section info // Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes. +#define STRING_CONFIG_H_AUTHOR "(jagoosw, Ender-5)" // Who made the changes. //#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) /** @@ -87,10 +95,10 @@ #define SHOW_BOOTSCREEN // Show the bitmap in Marlin/_Bootscreen.h on startup. -//#define SHOW_CUSTOM_BOOTSCREEN +#define SHOW_CUSTOM_BOOTSCREEN // Show the bitmap in Marlin/_Statusscreen.h on the status screen. -//#define CUSTOM_STATUS_SCREEN_IMAGE +#define CUSTOM_STATUS_SCREEN_IMAGE // @section machine @@ -102,14 +110,14 @@ * * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] */ -#define SERIAL_PORT 0 +#define SERIAL_PORT -1 /** * Select a secondary serial port on the board to use for communication with the host. * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] */ -//#define SERIAL_PORT_2 -1 +#define SERIAL_PORT_2 0 /** * Select a third serial port on the board to use for communication with the host. @@ -127,18 +135,22 @@ * * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ -#define BAUDRATE 250000 +#define BAUDRATE 115200 // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH // Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_RAMPS_14_EFB + #if ENABLED(SKR_14_Turbo) + #define MOTHERBOARD BOARD_BTT_SKR_V1_4_TURBO + #else + #define MOTHERBOARD BOARD_MELZI_CREALITY + #endif #endif // Name displayed in the LCD "Ready" message and Info menu -//#define CUSTOM_MACHINE_NAME "3D Printer" +#define CUSTOM_MACHINE_NAME "Ender-5" // Printer's unique ID, used by some programs to differentiate between machines. // Choose your own or use a service like https://www.uuidgenerator.net/version4 @@ -416,7 +428,11 @@ * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. */ -#define TEMP_SENSOR_0 1 +#if ENABLED(E3D) + #define TEMP_SENSOR_0 5 +#else + #define TEMP_SENSOR_0 1 +#endif #define TEMP_SENSOR_1 0 #define TEMP_SENSOR_2 0 #define TEMP_SENSOR_3 0 @@ -424,9 +440,11 @@ #define TEMP_SENSOR_5 0 #define TEMP_SENSOR_6 0 #define TEMP_SENSOR_7 0 -#define TEMP_SENSOR_BED 0 +#define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 -#define TEMP_SENSOR_CHAMBER 0 +#if ENABLED(chamber) + #define TEMP_SENSOR_CHAMBER 1 +#endif #define TEMP_SENSOR_COOLER 0 // Dummy thermistor constant temperature readings, for use with 998 and 999 @@ -453,8 +471,8 @@ #define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target #define TEMP_CHAMBER_RESIDENCY_TIME 10 // (seconds) Time to wait for chamber to "settle" in M191 -#define TEMP_CHAMBER_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_CHAMBER_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target +#define TEMP_CHAMBER_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer +#define TEMP_CHAMBER_HYSTERESIS 5 // (°C) Temperature proximity considered "close enough" to the target // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. @@ -472,16 +490,22 @@ // Above this temperature the heater will be switched off. // This can protect components from overheating, but NOT from shorts and failures. // (Use MINTEMP for thermistor short/failure protection.) -#define HEATER_0_MAXTEMP 275 -#define HEATER_1_MAXTEMP 275 -#define HEATER_2_MAXTEMP 275 -#define HEATER_3_MAXTEMP 275 -#define HEATER_4_MAXTEMP 275 -#define HEATER_5_MAXTEMP 275 -#define HEATER_6_MAXTEMP 275 -#define HEATER_7_MAXTEMP 275 -#define BED_MAXTEMP 150 -#define CHAMBER_MAXTEMP 60 +#if ENABLED(E3D) + #define HEATER_0_MAXTEMP 300 +#elif ENABLED(E3D_Extreme) + #define HEATER_0_MAXTEMP 320 +#else + #define HEATER_0_MAXTEMP 275 +#endif +#define HEATER_1_MAXTEMP 300 +#define HEATER_2_MAXTEMP 300 +#define HEATER_3_MAXTEMP 300 +#define HEATER_4_MAXTEMP 300 +#define HEATER_5_MAXTEMP 300 +#define HEATER_6_MAXTEMP 300 +#define HEATER_7_MAXTEMP 300 +#define BED_MAXTEMP 125 +#define CHAMBER_MAXTEMP 80 /** * Thermal Overshoot @@ -505,21 +529,22 @@ #define PID_K1 0.95 // Smoothing factor within any PID loop #if ENABLED(PIDTEMP) - //#define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) - //#define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) + #define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) + #define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) // Set/get with gcode: M301 E[extruder number, 0-2] + // Creality Ender-5 #if ENABLED(PID_PARAMS_PER_HOTEND) // Specify between 1 and HOTENDS values per array. // If fewer than EXTRUDER values are provided, the last element will be repeated. - #define DEFAULT_Kp_LIST { 22.20, 22.20 } - #define DEFAULT_Ki_LIST { 1.08, 1.08 } - #define DEFAULT_Kd_LIST { 114.00, 114.00 } + #define DEFAULT_Kp_LIST { 28.81, 28.81 } + #define DEFAULT_Ki_LIST { 2.25, 2.25 } + #define DEFAULT_Kd_LIST { 92.34, 92.34 } #else - #define DEFAULT_Kp 22.20 - #define DEFAULT_Ki 1.08 - #define DEFAULT_Kd 114.00 + #define DEFAULT_Kp 28.81 + #define DEFAULT_Ki 2.25 + #define DEFAULT_Kd 92.34 #endif #endif // PIDTEMP @@ -743,15 +768,22 @@ * TMC5130, TMC5130_STANDALONE, TMC5160, TMC5160_STANDALONE * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'L6474', 'POWERSTEP01', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2160', 'TMC2160_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC2209', 'TMC2209_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE', 'TMC5160', 'TMC5160_STANDALONE'] */ -#define X_DRIVER_TYPE A4988 -#define Y_DRIVER_TYPE A4988 -#define Z_DRIVER_TYPE A4988 +#if ENABLED(TMC2209_Enabled) + #define X_DRIVER_TYPE TMC2209 + #define Y_DRIVER_TYPE TMC2209 + #define Z_DRIVER_TYPE TMC2209 + #define E0_DRIVER_TYPE TMC2209 +#else + #define X_DRIVER_TYPE A4988 + #define Y_DRIVER_TYPE A4988 + #define Z_DRIVER_TYPE A4988 + #define E0_DRIVER_TYPE A4988 +#endif //#define X2_DRIVER_TYPE A4988 //#define Y2_DRIVER_TYPE A4988 //#define Z2_DRIVER_TYPE A4988 //#define Z3_DRIVER_TYPE A4988 //#define Z4_DRIVER_TYPE A4988 -#define E0_DRIVER_TYPE A4988 //#define E1_DRIVER_TYPE A4988 //#define E2_DRIVER_TYPE A4988 //#define E3_DRIVER_TYPE A4988 @@ -799,21 +831,21 @@ * following movement settings. If fewer factors are given than the * total number of extruders, the last value applies to the rest. */ -//#define DISTINCT_E_FACTORS +#define DISTINCT_E_FACTORS /** * Default Axis Steps Per Unit (steps/mm) * Override with M92 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 500 } +#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 800, 93 } /** * Default Max Feed Rate (mm/s) * Override with M203 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 } +#define DEFAULT_MAX_FEEDRATE { 500, 500, 5, 25 } //#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 #if ENABLED(LIMITED_MAX_FR_EDITING) @@ -826,7 +858,7 @@ * Override with M201 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 } +#define DEFAULT_MAX_ACCELERATION { 500, 500, 100, 5000 } //#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 #if ENABLED(LIMITED_MAX_ACCEL_EDITING) @@ -841,9 +873,9 @@ * M204 R Retract Acceleration * M204 T Travel Acceleration */ -#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves +#define DEFAULT_ACCELERATION 500 // X, Y, Z and E acceleration for printing moves +#define DEFAULT_RETRACT_ACCELERATION 500 // E acceleration for retracts +#define DEFAULT_TRAVEL_ACCELERATION 500 // X, Y, Z acceleration for travel (non printing) moves /** * Default Jerk limits (mm/s) @@ -877,7 +909,7 @@ * https://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html */ #if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.013 // (mm) Distance from real junction edge + #define JUNCTION_DEVIATION_MM 0.08 // (mm) Distance from real junction edge #define JD_HANDLE_SMALL_SEGMENTS // Use curvature estimation instead of just the junction angle // for small segments (< 1mm) with large junction angles (> 135°). #endif @@ -890,7 +922,7 @@ * * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained */ -//#define S_CURVE_ACCELERATION +#define S_CURVE_ACCELERATION //=========================================================================== //============================= Z Probe Options ============================= @@ -1185,19 +1217,19 @@ // @section extruder #define DISABLE_E false // Disable the extruder when not stepping -#define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled +//#define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled // @section machine // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR false -#define INVERT_Y_DIR true -#define INVERT_Z_DIR false +#define INVERT_Y_DIR false +#define INVERT_Z_DIR true // @section extruder // For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR false +#define INVERT_E0_DIR true #define INVERT_E1_DIR false #define INVERT_E2_DIR false #define INVERT_E3_DIR false @@ -1232,8 +1264,8 @@ // @section machine // The size of the printable area -#define X_BED_SIZE 200 -#define Y_BED_SIZE 200 +#define X_BED_SIZE 235 +#define Y_BED_SIZE 235 // Travel limits (mm) after homing, corresponding to endstop positions. #define X_MIN_POS 0 @@ -1241,7 +1273,7 @@ #define Z_MIN_POS 0 #define X_MAX_POS X_BED_SIZE #define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 200 +#define Z_MAX_POS 300 /** * Software Endstops @@ -1595,7 +1627,7 @@ #endif // Homing speeds (mm/min) -#define HOMING_FEEDRATE_MM_M { (50*60), (50*60), (4*60) } +#define HOMING_FEEDRATE_MM_M { (20*60), (20*60), (4*60) } // Validate that endstops are triggered on homing moves #define VALIDATE_HOMING_ENDSTOPS @@ -1672,7 +1704,7 @@ * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) */ -//#define EEPROM_SETTINGS // Persistent storage with M500 and M501 +#define EEPROM_SETTINGS // Persistent storage with M500 and M501 //#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. #define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load @@ -1706,16 +1738,16 @@ // Preheat Constants - Up to 5 are supported without changes // #define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 180 -#define PREHEAT_1_TEMP_BED 70 +#define PREHEAT_1_TEMP_HOTEND 200 +#define PREHEAT_1_TEMP_BED 50 #define PREHEAT_1_TEMP_CHAMBER 35 -#define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 +#define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 -#define PREHEAT_2_LABEL "ABS" -#define PREHEAT_2_TEMP_HOTEND 240 -#define PREHEAT_2_TEMP_BED 110 +#define PREHEAT_2_LABEL "PETG" +#define PREHEAT_2_TEMP_HOTEND 220 +#define PREHEAT_2_TEMP_BED 80 #define PREHEAT_2_TEMP_CHAMBER 35 -#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 +#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 /** * Nozzle Park @@ -1921,7 +1953,7 @@ * * :['JAPANESE', 'WESTERN', 'CYRILLIC'] */ -#define DISPLAY_CHARSET_HD44780 JAPANESE +#define DISPLAY_CHARSET_HD44780 WESTERN /** * Info Screen Style (0:Classic, 1:Průša) @@ -1936,7 +1968,7 @@ * SD Card support is disabled by default. If your controller has an SD slot, * you must uncomment the following option or it won't work. */ -//#define SDSUPPORT +#define SDSUPPORT /** * SD CARD: ENABLE CRC @@ -2287,7 +2319,7 @@ // This is RAMPS-compatible using a single 10-pin connector. // (For CR-10 owners who want to replace the Melzi Creality board but retain the display) // -//#define CR10_STOCKDISPLAY +#define CR10_STOCKDISPLAY // // Ender-2 OEM display, a variant of the MKS_MINI_12864 diff --git a/config/examples/Creality/Ender-5/BigTreeTech SKR 1.4 Turbo (TMC2209)/Configuration_adv.h b/config/examples/Creality/Ender-5/BigTreeTech SKR 1.4 Turbo (TMC2209)/Configuration_adv.h index 5335fa012a..e2d0f2cebf 100644 --- a/config/examples/Creality/Ender-5/BigTreeTech SKR 1.4 Turbo (TMC2209)/Configuration_adv.h +++ b/config/examples/Creality/Ender-5/BigTreeTech SKR 1.4 Turbo (TMC2209)/Configuration_adv.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Creality/Ender-5/BigTreeTech SKR 1.4 Turbo (TMC2209)" + /** * Configuration_adv.h * @@ -238,8 +240,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 120 // Seconds + #define THERMAL_PROTECTION_HYSTERESIS 10 // Degrees Celsius //#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops #if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP) @@ -540,7 +542,11 @@ * Multiple extruders can be assigned to the same pin in which case * the fan will turn on when any selected extruder is above the threshold. */ -#define E0_AUTO_FAN_PIN -1 +#if ENABLED(chamber) + #define E0_AUTO_FAN_PIN -1 +#else + #define E0_AUTO_FAN_PIN P2_04 +#endif #define E1_AUTO_FAN_PIN -1 #define E2_AUTO_FAN_PIN -1 #define E3_AUTO_FAN_PIN -1 @@ -736,7 +742,7 @@ //#define SENSORLESS_BACKOFF_MM { 2, 2 } // (mm) Backoff from endstops before sensorless homing -#define HOMING_BUMP_MM { 5, 5, 2 } // (mm) Backoff from endstops after first bump +#define HOMING_BUMP_MM { 0, 0, 2 } // (mm) Backoff from endstops after first bump: {0,0,2} for sensorless homing; {5,5,2} for endstops. #define HOMING_BUMP_DIVISOR { 2, 2, 4 } // Re-Bump Speed Divisor (Divides the Homing Feedrate) //#define HOMING_BACKOFF_POST_MM { 2, 2, 2 } // (mm) Backoff from endstops after homing @@ -928,7 +934,7 @@ #define DEFAULT_STEPPER_DEACTIVE_TIME 120 #define DISABLE_INACTIVE_X true #define DISABLE_INACTIVE_Y true -#define DISABLE_INACTIVE_Z true // Set 'false' if the nozzle could fall onto your printed part! +#define DISABLE_INACTIVE_Z false // Set 'false' if the nozzle could fall onto your printed part! #define DISABLE_INACTIVE_E true // Default Minimum Feedrates for printing and travel moves @@ -1175,7 +1181,7 @@ #endif // Include a page of printer information in the LCD Main Menu - //#define LCD_INFO_MENU + #define LCD_INFO_MENU #if ENABLED(LCD_INFO_MENU) //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages #endif @@ -1229,7 +1235,7 @@ #endif // Scroll a longer status message into view - //#define STATUS_MESSAGE_SCROLLING + #define STATUS_MESSAGE_SCROLLING // On the Info Screen, display XY with one decimal place when possible //#define LCD_DECIMAL_SMALL_XY @@ -1297,7 +1303,7 @@ #define SD_MENU_CONFIRM_START // Confirm the selected SD file before printing //#define NO_SD_AUTOSTART // Remove auto#.g file support completely to save some Flash, SRAM - //#define MENU_ADDAUTOSTART // Add a menu option to run auto#.g files + #define MENU_ADDAUTOSTART // Add a menu option to run auto#.g files //#define BROWSE_MEDIA_ON_INSERT // Open the file browser when media is inserted @@ -1384,7 +1390,7 @@ //#define LONG_FILENAME_HOST_SUPPORT // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES + #define SCROLL_LONG_FILENAMES // Leave the heaters on after Stop Print (not recommended!) //#define SD_ABORT_NO_COOLDOWN @@ -1476,7 +1482,7 @@ * * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] */ - //#define SDCARD_CONNECTION LCD + #define SDCARD_CONNECTION ONBOARD // Enable if SD detect is rendered useless (e.g., by using an SD extender) //#define NO_SD_DETECT @@ -1790,7 +1796,7 @@ * * Warning: Does not respect endstops! */ -//#define BABYSTEPPING +#define BABYSTEPPING #if ENABLED(BABYSTEPPING) //#define INTEGRATED_BABYSTEPPING // EXPERIMENTAL integration of babystepping into the Stepper ISR //#define BABYSTEP_WITHOUT_HOMING @@ -1801,7 +1807,7 @@ #define BABYSTEP_MULTIPLICATOR_Z 1 // (steps or mm) Steps or millimeter distance for each Z babystep #define BABYSTEP_MULTIPLICATOR_XY 1 // (steps or mm) Steps or millimeter distance for each XY babystep - //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. + #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. // Note: Extra time may be added to mitigate controller latency. @@ -2141,7 +2147,7 @@ * Currently handles M108, M112, M410, M876 * NOTE: Not yet implemented for all platforms. */ -//#define EMERGENCY_PARSER +#define EMERGENCY_PARSER /** * Realtime Reporting (requires EMERGENCY_PARSER) @@ -2493,7 +2499,7 @@ #define INTERPOLATE true #if AXIS_IS_TMC(X) - #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. + #define X_CURRENT 650 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for sensorless homing #define X_MICROSTEPS 16 // 0..256 #define X_RSENSE 0.11 @@ -2502,7 +2508,7 @@ #endif #if AXIS_IS_TMC(X2) - #define X2_CURRENT 800 + #define X2_CURRENT 650 #define X2_CURRENT_HOME X2_CURRENT #define X2_MICROSTEPS X_MICROSTEPS #define X2_RSENSE 0.11 @@ -2511,7 +2517,7 @@ #endif #if AXIS_IS_TMC(Y) - #define Y_CURRENT 800 + #define Y_CURRENT 650 #define Y_CURRENT_HOME Y_CURRENT #define Y_MICROSTEPS 16 #define Y_RSENSE 0.11 @@ -2529,7 +2535,7 @@ #endif #if AXIS_IS_TMC(Z) - #define Z_CURRENT 800 + #define Z_CURRENT 580 #define Z_CURRENT_HOME Z_CURRENT #define Z_MICROSTEPS 16 #define Z_RSENSE 0.11 @@ -2565,7 +2571,7 @@ #endif #if AXIS_IS_TMC(E0) - #define E0_CURRENT 800 + #define E0_CURRENT 650 #define E0_MICROSTEPS 16 #define E0_RSENSE 0.11 #define E0_CHAIN_POS -1 @@ -2719,7 +2725,7 @@ * Define your own with: * { , , hysteresis_start[1..8] } */ - #define CHOPPER_TIMING CHOPPER_DEFAULT_12V // All axes (override below) + #define CHOPPER_TIMING CHOPPER_DEFAULT_24V // All axes (override below) //#define CHOPPER_TIMING_X CHOPPER_TIMING // For X Axes (override below) //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X //#define CHOPPER_TIMING_Y CHOPPER_TIMING // For Y Axes (override below) @@ -2763,7 +2769,7 @@ * STEALTHCHOP_(XY|Z|E) must be enabled to use HYBRID_THRESHOLD. * M913 X/Y/Z/E to live tune the setting */ - //#define HYBRID_THRESHOLD + #define HYBRID_THRESHOLD #define X_HYBRID_THRESHOLD 100 // [mm/s] #define X2_HYBRID_THRESHOLD 100 @@ -2807,20 +2813,20 @@ * * Comment *_STALL_SENSITIVITY to disable sensorless homing for that axis. */ - //#define SENSORLESS_HOMING // StallGuard capable drivers only + #define SENSORLESS_HOMING // StallGuard capable drivers only #if EITHER(SENSORLESS_HOMING, SENSORLESS_PROBING) // TMC2209: 0...255. TMC2130: -64...63 - #define X_STALL_SENSITIVITY 8 + #define X_STALL_SENSITIVITY 45 #define X2_STALL_SENSITIVITY X_STALL_SENSITIVITY - #define Y_STALL_SENSITIVITY 8 + #define Y_STALL_SENSITIVITY 70 #define Y2_STALL_SENSITIVITY Y_STALL_SENSITIVITY - //#define Z_STALL_SENSITIVITY 8 + //#define Z_STALL_SENSITIVITY 40 //#define Z2_STALL_SENSITIVITY Z_STALL_SENSITIVITY //#define Z3_STALL_SENSITIVITY Z_STALL_SENSITIVITY //#define Z4_STALL_SENSITIVITY Z_STALL_SENSITIVITY //#define SPI_ENDSTOPS // TMC2130 only - //#define IMPROVE_HOMING_RELIABILITY + #define IMPROVE_HOMING_RELIABILITY #endif /** @@ -2845,7 +2851,7 @@ * Enable M122 debugging command for TMC stepper drivers. * M122 S0/1 will enable continuous reporting. */ - //#define TMC_DEBUG + #define TMC_DEBUG /** * You can set your own advanced settings by filling in predefined functions. diff --git a/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo with BLTouch/Configuration.h b/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo with BLTouch/Configuration.h index 78c2dc9160..b4e2f16358 100644 --- a/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo with BLTouch/Configuration.h +++ b/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo with BLTouch/Configuration.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Creality/Ender-5/BigTreeTech SKR E3 Turbo with BLTouch" + /** * Configuration.h * @@ -69,7 +71,7 @@ // @section info // Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes. +#define STRING_CONFIG_H_AUTHOR "(lpla, Ender-5)" // Who made the changes. //#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) /** @@ -102,14 +104,14 @@ * * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] */ -#define SERIAL_PORT 0 +#define SERIAL_PORT -1 /** * Select a secondary serial port on the board to use for communication with the host. * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] */ -//#define SERIAL_PORT_2 -1 +#define SERIAL_PORT_2 0 /** * Select a third serial port on the board to use for communication with the host. @@ -127,18 +129,18 @@ * * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ -#define BAUDRATE 250000 +#define BAUDRATE 115200 // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH // Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_RAMPS_14_EFB + #define MOTHERBOARD BOARD_BTT_SKR_E3_TURBO #endif // Name displayed in the LCD "Ready" message and Info menu -//#define CUSTOM_MACHINE_NAME "3D Printer" +#define CUSTOM_MACHINE_NAME "Ender-5" // Printer's unique ID, used by some programs to differentiate between machines. // Choose your own or use a service like https://www.uuidgenerator.net/version4 @@ -424,7 +426,7 @@ #define TEMP_SENSOR_5 0 #define TEMP_SENSOR_6 0 #define TEMP_SENSOR_7 0 -#define TEMP_SENSOR_BED 0 +#define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 #define TEMP_SENSOR_COOLER 0 @@ -480,7 +482,7 @@ #define HEATER_5_MAXTEMP 275 #define HEATER_6_MAXTEMP 275 #define HEATER_7_MAXTEMP 275 -#define BED_MAXTEMP 150 +#define BED_MAXTEMP 125 #define CHAMBER_MAXTEMP 60 /** @@ -505,21 +507,22 @@ #define PID_K1 0.95 // Smoothing factor within any PID loop #if ENABLED(PIDTEMP) - //#define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) - //#define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) + #define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) + #define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) // Set/get with gcode: M301 E[extruder number, 0-2] + // Creality Ender-5 #if ENABLED(PID_PARAMS_PER_HOTEND) // Specify between 1 and HOTENDS values per array. // If fewer than EXTRUDER values are provided, the last element will be repeated. - #define DEFAULT_Kp_LIST { 22.20, 22.20 } - #define DEFAULT_Ki_LIST { 1.08, 1.08 } - #define DEFAULT_Kd_LIST { 114.00, 114.00 } + #define DEFAULT_Kp_LIST { 21.73, 21.73 } + #define DEFAULT_Ki_LIST { 1.54, 1.54 } + #define DEFAULT_Kd_LIST { 76.55, 76.55 } #else - #define DEFAULT_Kp 22.20 - #define DEFAULT_Ki 1.08 - #define DEFAULT_Kd 114.00 + #define DEFAULT_Kp 21.73 + #define DEFAULT_Ki 1.54 + #define DEFAULT_Kd 76.55 #endif #endif // PIDTEMP @@ -683,11 +686,11 @@ // Specify here all the endstop connectors that are connected to any endstop or probe. // Almost all printers will be using one per axis. Probes will use one or more of the // extra connectors. Leave undefined any used for non-endstop and non-probe purposes. -#define USE_XMIN_PLUG -#define USE_YMIN_PLUG +//#define USE_XMIN_PLUG +//#define USE_YMIN_PLUG #define USE_ZMIN_PLUG -//#define USE_XMAX_PLUG -//#define USE_YMAX_PLUG +#define USE_XMAX_PLUG +#define USE_YMAX_PLUG //#define USE_ZMAX_PLUG // Enable pullup for all endstops to prevent a floating state @@ -743,15 +746,15 @@ * TMC5130, TMC5130_STANDALONE, TMC5160, TMC5160_STANDALONE * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'L6474', 'POWERSTEP01', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2160', 'TMC2160_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC2209', 'TMC2209_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE', 'TMC5160', 'TMC5160_STANDALONE'] */ -#define X_DRIVER_TYPE A4988 -#define Y_DRIVER_TYPE A4988 -#define Z_DRIVER_TYPE A4988 +#define X_DRIVER_TYPE TMC2209 +#define Y_DRIVER_TYPE TMC2209 +#define Z_DRIVER_TYPE TMC2209 //#define X2_DRIVER_TYPE A4988 //#define Y2_DRIVER_TYPE A4988 //#define Z2_DRIVER_TYPE A4988 //#define Z3_DRIVER_TYPE A4988 //#define Z4_DRIVER_TYPE A4988 -#define E0_DRIVER_TYPE A4988 +#define E0_DRIVER_TYPE TMC2209 //#define E1_DRIVER_TYPE A4988 //#define E2_DRIVER_TYPE A4988 //#define E3_DRIVER_TYPE A4988 @@ -806,14 +809,14 @@ * Override with M92 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 500 } +#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 800, 93 } /** * Default Max Feed Rate (mm/s) * Override with M203 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 } +#define DEFAULT_MAX_FEEDRATE { 500, 500, 5, 25 } //#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 #if ENABLED(LIMITED_MAX_FR_EDITING) @@ -826,7 +829,7 @@ * Override with M201 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 } +#define DEFAULT_MAX_ACCELERATION { 500, 500, 100, 5000 } //#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 #if ENABLED(LIMITED_MAX_ACCEL_EDITING) @@ -841,9 +844,9 @@ * M204 R Retract Acceleration * M204 T Travel Acceleration */ -#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves +#define DEFAULT_ACCELERATION 500 // X, Y, Z and E acceleration for printing moves +#define DEFAULT_RETRACT_ACCELERATION 500 // E acceleration for retracts +#define DEFAULT_TRAVEL_ACCELERATION 500 // X, Y, Z acceleration for travel (non printing) moves /** * Default Jerk limits (mm/s) @@ -877,7 +880,7 @@ * https://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html */ #if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.013 // (mm) Distance from real junction edge + #define JUNCTION_DEVIATION_MM 0.08 // (mm) Distance from real junction edge #define JD_HANDLE_SMALL_SEGMENTS // Use curvature estimation instead of just the junction angle // for small segments (< 1mm) with large junction angles (> 135°). #endif @@ -906,10 +909,10 @@ * The probe replaces the Z-MIN endstop and is used for Z homing. * (Automatically enables USE_PROBE_FOR_Z_HOMING.) */ -#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN +//#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN // Force the use of the probe for Z-axis homing -//#define USE_PROBE_FOR_Z_HOMING +#define USE_PROBE_FOR_Z_HOMING /** * Z_MIN_PROBE_PIN @@ -963,7 +966,7 @@ /** * The BLTouch probe uses a Hall effect sensor and emulates a servo. */ -//#define BLTOUCH +#define BLTOUCH /** * Touch-MI Probe by hotends.fr @@ -1055,7 +1058,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +#define NOZZLE_TO_PROBE_OFFSET { -40, -10, -1.85 } // Most probes should stay away from the edges of the bed, but // with NOZZLE_AS_PROBE this can be negative for a wider probing area. @@ -1190,14 +1193,14 @@ // @section machine // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR false +#define INVERT_X_DIR true #define INVERT_Y_DIR true -#define INVERT_Z_DIR false +#define INVERT_Z_DIR true // @section extruder // For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR false +#define INVERT_E0_DIR true #define INVERT_E1_DIR false #define INVERT_E2_DIR false #define INVERT_E3_DIR false @@ -1225,15 +1228,15 @@ // Direction of endstops when homing; 1=MAX, -1=MIN // :[-1,1] -#define X_HOME_DIR -1 -#define Y_HOME_DIR -1 +#define X_HOME_DIR 1 +#define Y_HOME_DIR 1 #define Z_HOME_DIR -1 // @section machine // The size of the printable area -#define X_BED_SIZE 200 -#define Y_BED_SIZE 200 +#define X_BED_SIZE 220 +#define Y_BED_SIZE 220 // Travel limits (mm) after homing, corresponding to endstop positions. #define X_MIN_POS 0 @@ -1241,7 +1244,7 @@ #define Z_MIN_POS 0 #define X_MAX_POS X_BED_SIZE #define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 200 +#define Z_MAX_POS 300 /** * Software Endstops @@ -1387,7 +1390,7 @@ */ //#define AUTO_BED_LEVELING_3POINT //#define AUTO_BED_LEVELING_LINEAR -//#define AUTO_BED_LEVELING_BILINEAR +#define AUTO_BED_LEVELING_BILINEAR //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING @@ -1587,7 +1590,7 @@ // - Move the Z probe (or nozzle) to a defined XY point before Z Homing. // - Prevent Z homing when the Z probe is outside bed area. // -//#define Z_SAFE_HOMING +#define Z_SAFE_HOMING #if ENABLED(Z_SAFE_HOMING) #define Z_SAFE_HOMING_X_POINT X_CENTER // X point for Z homing @@ -1672,7 +1675,7 @@ * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) */ -//#define EEPROM_SETTINGS // Persistent storage with M500 and M501 +#define EEPROM_SETTINGS // Persistent storage with M500 and M501 //#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. #define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load @@ -1706,16 +1709,16 @@ // Preheat Constants - Up to 5 are supported without changes // #define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 180 -#define PREHEAT_1_TEMP_BED 70 +#define PREHEAT_1_TEMP_HOTEND 200 +#define PREHEAT_1_TEMP_BED 50 #define PREHEAT_1_TEMP_CHAMBER 35 -#define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 +#define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 -#define PREHEAT_2_LABEL "ABS" -#define PREHEAT_2_TEMP_HOTEND 240 -#define PREHEAT_2_TEMP_BED 110 +#define PREHEAT_2_LABEL "PETG" +#define PREHEAT_2_TEMP_HOTEND 220 +#define PREHEAT_2_TEMP_BED 80 #define PREHEAT_2_TEMP_CHAMBER 35 -#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 +#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 /** * Nozzle Park @@ -1921,7 +1924,7 @@ * * :['JAPANESE', 'WESTERN', 'CYRILLIC'] */ -#define DISPLAY_CHARSET_HD44780 JAPANESE +#define DISPLAY_CHARSET_HD44780 WESTERN /** * Info Screen Style (0:Classic, 1:Průša) @@ -1936,7 +1939,7 @@ * SD Card support is disabled by default. If your controller has an SD slot, * you must uncomment the following option or it won't work. */ -//#define SDSUPPORT +#define SDSUPPORT /** * SD CARD: ENABLE CRC @@ -2014,7 +2017,7 @@ // If you have a speaker that can produce tones, enable it here. // By default Marlin assumes you have a buzzer with a fixed frequency. // -//#define SPEAKER +#define SPEAKER // // The duration and frequency for the UI feedback sound. @@ -2287,7 +2290,7 @@ // This is RAMPS-compatible using a single 10-pin connector. // (For CR-10 owners who want to replace the Melzi Creality board but retain the display) // -//#define CR10_STOCKDISPLAY +#define CR10_STOCKDISPLAY // // Ender-2 OEM display, a variant of the MKS_MINI_12864 diff --git a/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo with BLTouch/Configuration_adv.h b/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo with BLTouch/Configuration_adv.h index 5335fa012a..e809acb327 100644 --- a/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo with BLTouch/Configuration_adv.h +++ b/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo with BLTouch/Configuration_adv.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Creality/Ender-5/BigTreeTech SKR E3 Turbo with BLTouch" + /** * Configuration_adv.h * @@ -741,7 +743,7 @@ //#define HOMING_BACKOFF_POST_MM { 2, 2, 2 } // (mm) Backoff from endstops after homing -//#define QUICK_HOME // If G28 contains XY do a diagonal move first +#define QUICK_HOME // If G28 contains XY do a diagonal move first //#define HOME_Y_BEFORE_X // If G28 contains XY home Y before X //#define HOME_Z_FIRST // Home Z first. Requires a Z-MIN endstop (not a probe). //#define CODEPENDENT_XY_HOMING // If X/Y can't home without homing Y/X first @@ -792,7 +794,7 @@ * differs, a mode set eeprom write will be completed at initialization. * Use the option below to force an eeprom write to a V3.1 probe regardless. */ - //#define BLTOUCH_SET_5V_MODE + #define BLTOUCH_SET_5V_MODE /** * Safety: Activate if connecting a probe with an unknown voltage mode. @@ -826,7 +828,7 @@ // Define probe X and Y positions for Z1, Z2 [, Z3 [, Z4]] // If not defined, probe limits will be used. // Override with 'M422 S X Y' - //#define Z_STEPPER_ALIGN_XY { { 10, 190 }, { 100, 10 }, { 190, 190 } } + //#define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } /** * Orientation for the automatically-calculated probe positions. @@ -867,7 +869,7 @@ // On a 300mm bed a 5% grade would give a misalignment of ~1.5cm #define G34_MAX_GRADE 5 // (%) Maximum incline that G34 will handle - #define Z_STEPPER_ALIGN_ITERATIONS 5 // Number of iterations to apply during alignment + #define Z_STEPPER_ALIGN_ITERATIONS 3 // Number of iterations to apply during alignment #define Z_STEPPER_ALIGN_ACC 0.02 // Stop iterating early if the accuracy is better than this #define RESTORE_LEVELING_AFTER_G34 // Restore leveling after G34 is done? // After G34, re-home Z (G28 Z) or just calculate it from the last probe heights? @@ -1135,7 +1137,7 @@ #if EITHER(IS_ULTIPANEL, EXTENSIBLE_UI) #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel - #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines + #define SHORT_MANUAL_Z_MOVE 0.025 // (mm) Smallest manual Z move (< 0.1mm) #if IS_ULTIPANEL #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position" #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen @@ -1175,7 +1177,7 @@ #endif // Include a page of printer information in the LCD Main Menu - //#define LCD_INFO_MENU + #define LCD_INFO_MENU #if ENABLED(LCD_INFO_MENU) //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages #endif @@ -1229,7 +1231,7 @@ #endif // Scroll a longer status message into view - //#define STATUS_MESSAGE_SCROLLING + #define STATUS_MESSAGE_SCROLLING // On the Info Screen, display XY with one decimal place when possible //#define LCD_DECIMAL_SMALL_XY @@ -1384,7 +1386,7 @@ //#define LONG_FILENAME_HOST_SUPPORT // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES + #define SCROLL_LONG_FILENAMES // Leave the heaters on after Stop Print (not recommended!) //#define SD_ABORT_NO_COOLDOWN @@ -1790,7 +1792,7 @@ * * Warning: Does not respect endstops! */ -//#define BABYSTEPPING +#define BABYSTEPPING #if ENABLED(BABYSTEPPING) //#define INTEGRATED_BABYSTEPPING // EXPERIMENTAL integration of babystepping into the Stepper ISR //#define BABYSTEP_WITHOUT_HOMING @@ -1801,7 +1803,7 @@ #define BABYSTEP_MULTIPLICATOR_Z 1 // (steps or mm) Steps or millimeter distance for each Z babystep #define BABYSTEP_MULTIPLICATOR_XY 1 // (steps or mm) Steps or millimeter distance for each XY babystep - //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. + #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. // Note: Extra time may be added to mitigate controller latency. @@ -2493,7 +2495,7 @@ #define INTERPOLATE true #if AXIS_IS_TMC(X) - #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. + #define X_CURRENT 580 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for sensorless homing #define X_MICROSTEPS 16 // 0..256 #define X_RSENSE 0.11 @@ -2511,7 +2513,7 @@ #endif #if AXIS_IS_TMC(Y) - #define Y_CURRENT 800 + #define Y_CURRENT 650 #define Y_CURRENT_HOME Y_CURRENT #define Y_MICROSTEPS 16 #define Y_RSENSE 0.11 @@ -2529,7 +2531,7 @@ #endif #if AXIS_IS_TMC(Z) - #define Z_CURRENT 800 + #define Z_CURRENT 580 #define Z_CURRENT_HOME Z_CURRENT #define Z_MICROSTEPS 16 #define Z_RSENSE 0.11 @@ -2565,7 +2567,7 @@ #endif #if AXIS_IS_TMC(E0) - #define E0_CURRENT 800 + #define E0_CURRENT 650 #define E0_MICROSTEPS 16 #define E0_RSENSE 0.11 #define E0_CHAIN_POS -1 @@ -2719,7 +2721,7 @@ * Define your own with: * { , , hysteresis_start[1..8] } */ - #define CHOPPER_TIMING CHOPPER_DEFAULT_12V // All axes (override below) + #define CHOPPER_TIMING CHOPPER_DEFAULT_24V // All axes (override below) //#define CHOPPER_TIMING_X CHOPPER_TIMING // For X Axes (override below) //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X //#define CHOPPER_TIMING_Y CHOPPER_TIMING // For Y Axes (override below) diff --git a/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo/Configuration.h b/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo/Configuration.h index 78c2dc9160..ae9883d1bc 100644 --- a/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo/Configuration.h +++ b/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo/Configuration.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Creality/Ender-5/BigTreeTech SKR E3 Turbo" + /** * Configuration.h * @@ -69,7 +71,7 @@ // @section info // Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes. +#define STRING_CONFIG_H_AUTHOR "(lpla, Ender-5)" // Who made the changes. //#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) /** @@ -102,14 +104,14 @@ * * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] */ -#define SERIAL_PORT 0 +#define SERIAL_PORT -1 /** * Select a secondary serial port on the board to use for communication with the host. * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] */ -//#define SERIAL_PORT_2 -1 +#define SERIAL_PORT_2 0 /** * Select a third serial port on the board to use for communication with the host. @@ -127,18 +129,18 @@ * * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ -#define BAUDRATE 250000 +#define BAUDRATE 115200 // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH // Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_RAMPS_14_EFB + #define MOTHERBOARD BOARD_BTT_SKR_E3_TURBO #endif // Name displayed in the LCD "Ready" message and Info menu -//#define CUSTOM_MACHINE_NAME "3D Printer" +#define CUSTOM_MACHINE_NAME "Ender-5" // Printer's unique ID, used by some programs to differentiate between machines. // Choose your own or use a service like https://www.uuidgenerator.net/version4 @@ -424,7 +426,7 @@ #define TEMP_SENSOR_5 0 #define TEMP_SENSOR_6 0 #define TEMP_SENSOR_7 0 -#define TEMP_SENSOR_BED 0 +#define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 #define TEMP_SENSOR_COOLER 0 @@ -480,7 +482,7 @@ #define HEATER_5_MAXTEMP 275 #define HEATER_6_MAXTEMP 275 #define HEATER_7_MAXTEMP 275 -#define BED_MAXTEMP 150 +#define BED_MAXTEMP 125 #define CHAMBER_MAXTEMP 60 /** @@ -505,21 +507,22 @@ #define PID_K1 0.95 // Smoothing factor within any PID loop #if ENABLED(PIDTEMP) - //#define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) - //#define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) + #define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) + #define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) // Set/get with gcode: M301 E[extruder number, 0-2] + // Creality Ender-5 #if ENABLED(PID_PARAMS_PER_HOTEND) // Specify between 1 and HOTENDS values per array. // If fewer than EXTRUDER values are provided, the last element will be repeated. - #define DEFAULT_Kp_LIST { 22.20, 22.20 } - #define DEFAULT_Ki_LIST { 1.08, 1.08 } - #define DEFAULT_Kd_LIST { 114.00, 114.00 } + #define DEFAULT_Kp_LIST { 21.73, 21.73 } + #define DEFAULT_Ki_LIST { 1.54, 1.54 } + #define DEFAULT_Kd_LIST { 76.55, 76.55 } #else - #define DEFAULT_Kp 22.20 - #define DEFAULT_Ki 1.08 - #define DEFAULT_Kd 114.00 + #define DEFAULT_Kp 21.73 + #define DEFAULT_Ki 1.54 + #define DEFAULT_Kd 76.55 #endif #endif // PIDTEMP @@ -683,11 +686,11 @@ // Specify here all the endstop connectors that are connected to any endstop or probe. // Almost all printers will be using one per axis. Probes will use one or more of the // extra connectors. Leave undefined any used for non-endstop and non-probe purposes. -#define USE_XMIN_PLUG -#define USE_YMIN_PLUG +//#define USE_XMIN_PLUG +//#define USE_YMIN_PLUG #define USE_ZMIN_PLUG -//#define USE_XMAX_PLUG -//#define USE_YMAX_PLUG +#define USE_XMAX_PLUG +#define USE_YMAX_PLUG //#define USE_ZMAX_PLUG // Enable pullup for all endstops to prevent a floating state @@ -743,15 +746,15 @@ * TMC5130, TMC5130_STANDALONE, TMC5160, TMC5160_STANDALONE * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'L6474', 'POWERSTEP01', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2160', 'TMC2160_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC2209', 'TMC2209_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE', 'TMC5160', 'TMC5160_STANDALONE'] */ -#define X_DRIVER_TYPE A4988 -#define Y_DRIVER_TYPE A4988 -#define Z_DRIVER_TYPE A4988 +#define X_DRIVER_TYPE TMC2209 +#define Y_DRIVER_TYPE TMC2209 +#define Z_DRIVER_TYPE TMC2209 //#define X2_DRIVER_TYPE A4988 //#define Y2_DRIVER_TYPE A4988 //#define Z2_DRIVER_TYPE A4988 //#define Z3_DRIVER_TYPE A4988 //#define Z4_DRIVER_TYPE A4988 -#define E0_DRIVER_TYPE A4988 +#define E0_DRIVER_TYPE TMC2209 //#define E1_DRIVER_TYPE A4988 //#define E2_DRIVER_TYPE A4988 //#define E3_DRIVER_TYPE A4988 @@ -806,14 +809,14 @@ * Override with M92 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 500 } +#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 800, 93 } /** * Default Max Feed Rate (mm/s) * Override with M203 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 } +#define DEFAULT_MAX_FEEDRATE { 500, 500, 5, 25 } //#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 #if ENABLED(LIMITED_MAX_FR_EDITING) @@ -826,7 +829,7 @@ * Override with M201 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 } +#define DEFAULT_MAX_ACCELERATION { 500, 500, 100, 5000 } //#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 #if ENABLED(LIMITED_MAX_ACCEL_EDITING) @@ -841,9 +844,9 @@ * M204 R Retract Acceleration * M204 T Travel Acceleration */ -#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves +#define DEFAULT_ACCELERATION 500 // X, Y, Z and E acceleration for printing moves +#define DEFAULT_RETRACT_ACCELERATION 500 // E acceleration for retracts +#define DEFAULT_TRAVEL_ACCELERATION 500 // X, Y, Z acceleration for travel (non printing) moves /** * Default Jerk limits (mm/s) @@ -877,7 +880,7 @@ * https://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html */ #if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.013 // (mm) Distance from real junction edge + #define JUNCTION_DEVIATION_MM 0.08 // (mm) Distance from real junction edge #define JD_HANDLE_SMALL_SEGMENTS // Use curvature estimation instead of just the junction angle // for small segments (< 1mm) with large junction angles (> 135°). #endif @@ -1055,7 +1058,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +#define NOZZLE_TO_PROBE_OFFSET { -40, -10, -1.85 } // Most probes should stay away from the edges of the bed, but // with NOZZLE_AS_PROBE this can be negative for a wider probing area. @@ -1190,14 +1193,14 @@ // @section machine // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR false +#define INVERT_X_DIR true #define INVERT_Y_DIR true -#define INVERT_Z_DIR false +#define INVERT_Z_DIR true // @section extruder // For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR false +#define INVERT_E0_DIR true #define INVERT_E1_DIR false #define INVERT_E2_DIR false #define INVERT_E3_DIR false @@ -1225,15 +1228,15 @@ // Direction of endstops when homing; 1=MAX, -1=MIN // :[-1,1] -#define X_HOME_DIR -1 -#define Y_HOME_DIR -1 +#define X_HOME_DIR 1 +#define Y_HOME_DIR 1 #define Z_HOME_DIR -1 // @section machine // The size of the printable area -#define X_BED_SIZE 200 -#define Y_BED_SIZE 200 +#define X_BED_SIZE 220 +#define Y_BED_SIZE 220 // Travel limits (mm) after homing, corresponding to endstop positions. #define X_MIN_POS 0 @@ -1241,7 +1244,7 @@ #define Z_MIN_POS 0 #define X_MAX_POS X_BED_SIZE #define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 200 +#define Z_MAX_POS 300 /** * Software Endstops @@ -1587,7 +1590,7 @@ // - Move the Z probe (or nozzle) to a defined XY point before Z Homing. // - Prevent Z homing when the Z probe is outside bed area. // -//#define Z_SAFE_HOMING +#define Z_SAFE_HOMING #if ENABLED(Z_SAFE_HOMING) #define Z_SAFE_HOMING_X_POINT X_CENTER // X point for Z homing @@ -1672,7 +1675,7 @@ * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) */ -//#define EEPROM_SETTINGS // Persistent storage with M500 and M501 +#define EEPROM_SETTINGS // Persistent storage with M500 and M501 //#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. #define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load @@ -1706,16 +1709,16 @@ // Preheat Constants - Up to 5 are supported without changes // #define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 180 -#define PREHEAT_1_TEMP_BED 70 +#define PREHEAT_1_TEMP_HOTEND 200 +#define PREHEAT_1_TEMP_BED 50 #define PREHEAT_1_TEMP_CHAMBER 35 -#define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 +#define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 -#define PREHEAT_2_LABEL "ABS" -#define PREHEAT_2_TEMP_HOTEND 240 -#define PREHEAT_2_TEMP_BED 110 +#define PREHEAT_2_LABEL "PETG" +#define PREHEAT_2_TEMP_HOTEND 220 +#define PREHEAT_2_TEMP_BED 80 #define PREHEAT_2_TEMP_CHAMBER 35 -#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 +#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 /** * Nozzle Park @@ -1921,7 +1924,7 @@ * * :['JAPANESE', 'WESTERN', 'CYRILLIC'] */ -#define DISPLAY_CHARSET_HD44780 JAPANESE +#define DISPLAY_CHARSET_HD44780 WESTERN /** * Info Screen Style (0:Classic, 1:Průša) @@ -1936,7 +1939,7 @@ * SD Card support is disabled by default. If your controller has an SD slot, * you must uncomment the following option or it won't work. */ -//#define SDSUPPORT +#define SDSUPPORT /** * SD CARD: ENABLE CRC @@ -2014,7 +2017,7 @@ // If you have a speaker that can produce tones, enable it here. // By default Marlin assumes you have a buzzer with a fixed frequency. // -//#define SPEAKER +#define SPEAKER // // The duration and frequency for the UI feedback sound. @@ -2287,7 +2290,7 @@ // This is RAMPS-compatible using a single 10-pin connector. // (For CR-10 owners who want to replace the Melzi Creality board but retain the display) // -//#define CR10_STOCKDISPLAY +#define CR10_STOCKDISPLAY // // Ender-2 OEM display, a variant of the MKS_MINI_12864 diff --git a/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo/Configuration_adv.h b/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo/Configuration_adv.h index 5335fa012a..95fe51456c 100644 --- a/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo/Configuration_adv.h +++ b/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo/Configuration_adv.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Creality/Ender-5/BigTreeTech SKR E3 Turbo" + /** * Configuration_adv.h * @@ -741,7 +743,7 @@ //#define HOMING_BACKOFF_POST_MM { 2, 2, 2 } // (mm) Backoff from endstops after homing -//#define QUICK_HOME // If G28 contains XY do a diagonal move first +#define QUICK_HOME // If G28 contains XY do a diagonal move first //#define HOME_Y_BEFORE_X // If G28 contains XY home Y before X //#define HOME_Z_FIRST // Home Z first. Requires a Z-MIN endstop (not a probe). //#define CODEPENDENT_XY_HOMING // If X/Y can't home without homing Y/X first @@ -826,7 +828,7 @@ // Define probe X and Y positions for Z1, Z2 [, Z3 [, Z4]] // If not defined, probe limits will be used. // Override with 'M422 S X Y' - //#define Z_STEPPER_ALIGN_XY { { 10, 190 }, { 100, 10 }, { 190, 190 } } + //#define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } /** * Orientation for the automatically-calculated probe positions. @@ -867,7 +869,7 @@ // On a 300mm bed a 5% grade would give a misalignment of ~1.5cm #define G34_MAX_GRADE 5 // (%) Maximum incline that G34 will handle - #define Z_STEPPER_ALIGN_ITERATIONS 5 // Number of iterations to apply during alignment + #define Z_STEPPER_ALIGN_ITERATIONS 3 // Number of iterations to apply during alignment #define Z_STEPPER_ALIGN_ACC 0.02 // Stop iterating early if the accuracy is better than this #define RESTORE_LEVELING_AFTER_G34 // Restore leveling after G34 is done? // After G34, re-home Z (G28 Z) or just calculate it from the last probe heights? @@ -1135,7 +1137,7 @@ #if EITHER(IS_ULTIPANEL, EXTENSIBLE_UI) #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel - #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines + #define SHORT_MANUAL_Z_MOVE 0.025 // (mm) Smallest manual Z move (< 0.1mm) #if IS_ULTIPANEL #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position" #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen @@ -1175,7 +1177,7 @@ #endif // Include a page of printer information in the LCD Main Menu - //#define LCD_INFO_MENU + #define LCD_INFO_MENU #if ENABLED(LCD_INFO_MENU) //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages #endif @@ -1229,7 +1231,7 @@ #endif // Scroll a longer status message into view - //#define STATUS_MESSAGE_SCROLLING + #define STATUS_MESSAGE_SCROLLING // On the Info Screen, display XY with one decimal place when possible //#define LCD_DECIMAL_SMALL_XY @@ -1384,7 +1386,7 @@ //#define LONG_FILENAME_HOST_SUPPORT // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES + #define SCROLL_LONG_FILENAMES // Leave the heaters on after Stop Print (not recommended!) //#define SD_ABORT_NO_COOLDOWN @@ -1801,7 +1803,7 @@ #define BABYSTEP_MULTIPLICATOR_Z 1 // (steps or mm) Steps or millimeter distance for each Z babystep #define BABYSTEP_MULTIPLICATOR_XY 1 // (steps or mm) Steps or millimeter distance for each XY babystep - //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. + #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. // Note: Extra time may be added to mitigate controller latency. @@ -2493,7 +2495,7 @@ #define INTERPOLATE true #if AXIS_IS_TMC(X) - #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. + #define X_CURRENT 580 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for sensorless homing #define X_MICROSTEPS 16 // 0..256 #define X_RSENSE 0.11 @@ -2511,7 +2513,7 @@ #endif #if AXIS_IS_TMC(Y) - #define Y_CURRENT 800 + #define Y_CURRENT 650 #define Y_CURRENT_HOME Y_CURRENT #define Y_MICROSTEPS 16 #define Y_RSENSE 0.11 @@ -2529,7 +2531,7 @@ #endif #if AXIS_IS_TMC(Z) - #define Z_CURRENT 800 + #define Z_CURRENT 580 #define Z_CURRENT_HOME Z_CURRENT #define Z_MICROSTEPS 16 #define Z_RSENSE 0.11 @@ -2565,7 +2567,7 @@ #endif #if AXIS_IS_TMC(E0) - #define E0_CURRENT 800 + #define E0_CURRENT 650 #define E0_MICROSTEPS 16 #define E0_RSENSE 0.11 #define E0_CHAIN_POS -1 @@ -2719,7 +2721,7 @@ * Define your own with: * { , , hysteresis_start[1..8] } */ - #define CHOPPER_TIMING CHOPPER_DEFAULT_12V // All axes (override below) + #define CHOPPER_TIMING CHOPPER_DEFAULT_24V // All axes (override below) //#define CHOPPER_TIMING_X CHOPPER_TIMING // For X Axes (override below) //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X //#define CHOPPER_TIMING_Y CHOPPER_TIMING // For Y Axes (override below) diff --git a/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 1.2/Configuration.h b/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 1.2/Configuration.h index 78c2dc9160..1510c639f0 100644 --- a/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 1.2/Configuration.h +++ b/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 1.2/Configuration.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Creality/Ender-5/BigTreeTech SKR Mini E3 1.2" + /** * Configuration.h * @@ -69,7 +71,7 @@ // @section info // Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes. +#define STRING_CONFIG_H_AUTHOR "(MakerHouse, Ender-5)" // Who made the changes. //#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) /** @@ -87,10 +89,10 @@ #define SHOW_BOOTSCREEN // Show the bitmap in Marlin/_Bootscreen.h on startup. -//#define SHOW_CUSTOM_BOOTSCREEN +#define SHOW_CUSTOM_BOOTSCREEN // Show the bitmap in Marlin/_Statusscreen.h on the status screen. -//#define CUSTOM_STATUS_SCREEN_IMAGE +#define CUSTOM_STATUS_SCREEN_IMAGE // @section machine @@ -102,14 +104,14 @@ * * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] */ -#define SERIAL_PORT 0 +#define SERIAL_PORT 2 /** * Select a secondary serial port on the board to use for communication with the host. * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] */ -//#define SERIAL_PORT_2 -1 +#define SERIAL_PORT_2 -1 /** * Select a third serial port on the board to use for communication with the host. @@ -127,18 +129,18 @@ * * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ -#define BAUDRATE 250000 +#define BAUDRATE 115200 // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH // Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_RAMPS_14_EFB + #define MOTHERBOARD BOARD_BTT_SKR_MINI_E3_V1_2 #endif // Name displayed in the LCD "Ready" message and Info menu -//#define CUSTOM_MACHINE_NAME "3D Printer" +#define CUSTOM_MACHINE_NAME "Ender-5" // Printer's unique ID, used by some programs to differentiate between machines. // Choose your own or use a service like https://www.uuidgenerator.net/version4 @@ -424,7 +426,7 @@ #define TEMP_SENSOR_5 0 #define TEMP_SENSOR_6 0 #define TEMP_SENSOR_7 0 -#define TEMP_SENSOR_BED 0 +#define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 #define TEMP_SENSOR_COOLER 0 @@ -480,7 +482,7 @@ #define HEATER_5_MAXTEMP 275 #define HEATER_6_MAXTEMP 275 #define HEATER_7_MAXTEMP 275 -#define BED_MAXTEMP 150 +#define BED_MAXTEMP 125 #define CHAMBER_MAXTEMP 60 /** @@ -510,16 +512,17 @@ //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) // Set/get with gcode: M301 E[extruder number, 0-2] + // Creality Ender-5 #if ENABLED(PID_PARAMS_PER_HOTEND) // Specify between 1 and HOTENDS values per array. // If fewer than EXTRUDER values are provided, the last element will be repeated. - #define DEFAULT_Kp_LIST { 22.20, 22.20 } - #define DEFAULT_Ki_LIST { 1.08, 1.08 } - #define DEFAULT_Kd_LIST { 114.00, 114.00 } + #define DEFAULT_Kp_LIST { 21.73, 21.73 } + #define DEFAULT_Ki_LIST { 1.54, 1.54 } + #define DEFAULT_Kd_LIST { 76.55, 76.55 } #else - #define DEFAULT_Kp 22.20 - #define DEFAULT_Ki 1.08 - #define DEFAULT_Kd 114.00 + #define DEFAULT_Kp 21.73 + #define DEFAULT_Ki 1.54 + #define DEFAULT_Kd 76.55 #endif #endif // PIDTEMP @@ -556,11 +559,9 @@ //#define MIN_BED_POWER 0 //#define PID_BED_DEBUG // Sends debug data to the serial port. - // 120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - // from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) - #define DEFAULT_bedKp 10.00 - #define DEFAULT_bedKi .023 - #define DEFAULT_bedKd 305.4 + #define DEFAULT_bedKp 50.71 + #define DEFAULT_bedKi 9.88 + #define DEFAULT_bedKd 173.43 // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. #endif // PIDTEMPBED @@ -634,7 +635,7 @@ * Note: For Bowden Extruders make this large enough to allow load/unload. */ #define PREVENT_LENGTHY_EXTRUDE -#define EXTRUDE_MAXLENGTH 200 +#define EXTRUDE_MAXLENGTH 600 //=========================================================================== //======================== Thermal Runaway Protection ======================= @@ -683,11 +684,11 @@ // Specify here all the endstop connectors that are connected to any endstop or probe. // Almost all printers will be using one per axis. Probes will use one or more of the // extra connectors. Leave undefined any used for non-endstop and non-probe purposes. -#define USE_XMIN_PLUG -#define USE_YMIN_PLUG +//#define USE_XMIN_PLUG +//#define USE_YMIN_PLUG #define USE_ZMIN_PLUG -//#define USE_XMAX_PLUG -//#define USE_YMAX_PLUG +#define USE_XMAX_PLUG +#define USE_YMAX_PLUG //#define USE_ZMAX_PLUG // Enable pullup for all endstops to prevent a floating state @@ -743,15 +744,15 @@ * TMC5130, TMC5130_STANDALONE, TMC5160, TMC5160_STANDALONE * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'L6474', 'POWERSTEP01', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2160', 'TMC2160_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC2209', 'TMC2209_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE', 'TMC5160', 'TMC5160_STANDALONE'] */ -#define X_DRIVER_TYPE A4988 -#define Y_DRIVER_TYPE A4988 -#define Z_DRIVER_TYPE A4988 +#define X_DRIVER_TYPE TMC2209 +#define Y_DRIVER_TYPE TMC2209 +#define Z_DRIVER_TYPE TMC2209 //#define X2_DRIVER_TYPE A4988 //#define Y2_DRIVER_TYPE A4988 //#define Z2_DRIVER_TYPE A4988 //#define Z3_DRIVER_TYPE A4988 //#define Z4_DRIVER_TYPE A4988 -#define E0_DRIVER_TYPE A4988 +#define E0_DRIVER_TYPE TMC2209 //#define E1_DRIVER_TYPE A4988 //#define E2_DRIVER_TYPE A4988 //#define E3_DRIVER_TYPE A4988 @@ -806,14 +807,14 @@ * Override with M92 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 500 } +#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 93 } /** * Default Max Feed Rate (mm/s) * Override with M203 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 } +#define DEFAULT_MAX_FEEDRATE { 500, 500, 5, 25 } //#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 #if ENABLED(LIMITED_MAX_FR_EDITING) @@ -826,7 +827,7 @@ * Override with M201 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 } +#define DEFAULT_MAX_ACCELERATION { 500, 500, 100, 5000 } //#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 #if ENABLED(LIMITED_MAX_ACCEL_EDITING) @@ -841,9 +842,9 @@ * M204 R Retract Acceleration * M204 T Travel Acceleration */ -#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves +#define DEFAULT_ACCELERATION 500 // X, Y, Z and E acceleration for printing moves +#define DEFAULT_RETRACT_ACCELERATION 500 // E acceleration for retracts +#define DEFAULT_TRAVEL_ACCELERATION 500 // X, Y, Z acceleration for travel (non printing) moves /** * Default Jerk limits (mm/s) @@ -877,7 +878,7 @@ * https://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html */ #if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.013 // (mm) Distance from real junction edge + #define JUNCTION_DEVIATION_MM 0.08 // (mm) Distance from real junction edge #define JD_HANDLE_SMALL_SEGMENTS // Use curvature estimation instead of just the junction angle // for small segments (< 1mm) with large junction angles (> 135°). #endif @@ -890,7 +891,7 @@ * * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained */ -//#define S_CURVE_ACCELERATION +#define S_CURVE_ACCELERATION //=========================================================================== //============================= Z Probe Options ============================= @@ -1055,7 +1056,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +#define NOZZLE_TO_PROBE_OFFSET { -48, -24, 0 } // Most probes should stay away from the edges of the bed, but // with NOZZLE_AS_PROBE this can be negative for a wider probing area. @@ -1132,7 +1133,7 @@ // For M851 give a range for adjusting the Z probe offset #define Z_PROBE_OFFSET_RANGE_MIN -20 -#define Z_PROBE_OFFSET_RANGE_MAX 20 +#define Z_PROBE_OFFSET_RANGE_MAX 20 // Enable the M48 repeatability test to test probe accuracy //#define Z_MIN_PROBE_REPEATABILITY_TEST @@ -1185,19 +1186,19 @@ // @section extruder #define DISABLE_E false // Disable the extruder when not stepping -#define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled +//#define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled // @section machine // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR false +#define INVERT_X_DIR true #define INVERT_Y_DIR true -#define INVERT_Z_DIR false +#define INVERT_Z_DIR true // @section extruder // For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR false +#define INVERT_E0_DIR true #define INVERT_E1_DIR false #define INVERT_E2_DIR false #define INVERT_E3_DIR false @@ -1225,15 +1226,15 @@ // Direction of endstops when homing; 1=MAX, -1=MIN // :[-1,1] -#define X_HOME_DIR -1 -#define Y_HOME_DIR -1 +#define X_HOME_DIR 1 +#define Y_HOME_DIR 1 #define Z_HOME_DIR -1 // @section machine // The size of the printable area -#define X_BED_SIZE 200 -#define Y_BED_SIZE 200 +#define X_BED_SIZE 230 +#define Y_BED_SIZE 230 // Travel limits (mm) after homing, corresponding to endstop positions. #define X_MIN_POS 0 @@ -1241,7 +1242,7 @@ #define Z_MIN_POS 0 #define X_MAX_POS X_BED_SIZE #define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 200 +#define Z_MAX_POS 250 /** * Software Endstops @@ -1389,7 +1390,7 @@ //#define AUTO_BED_LEVELING_LINEAR //#define AUTO_BED_LEVELING_BILINEAR //#define AUTO_BED_LEVELING_UBL -//#define MESH_BED_LEVELING +#define MESH_BED_LEVELING /** * Normally G28 leaves leveling disabled on completion. Enable one of @@ -1442,9 +1443,9 @@ #if ENABLED(G26_MESH_VALIDATION) #define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle. #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for G26. - #define MESH_TEST_HOTEND_TEMP 205 // (°C) Default nozzle temperature for G26. - #define MESH_TEST_BED_TEMP 60 // (°C) Default bed temperature for G26. - #define G26_XY_FEEDRATE 20 // (mm/s) Feedrate for G26 XY moves. + #define MESH_TEST_HOTEND_TEMP 205 // (°C) Default nozzle temperature for G26. + #define MESH_TEST_BED_TEMP 60 // (°C) Default bed temperature for G26. + #define G26_XY_FEEDRATE 20 // (mm/s) Feedrate for G26 XY moves. #define G26_XY_FEEDRATE_TRAVEL 100 // (mm/s) Feedrate for G26 XY travel moves. #define G26_RETRACT_MULTIPLIER 1.0 // G26 Q (retraction) used by default between mesh test elements. #endif @@ -1454,7 +1455,7 @@ #if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR) // Set the number of grid points per dimension. - #define GRID_MAX_POINTS_X 3 + #define GRID_MAX_POINTS_X 5 #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X // Probe along the Y axis, advancing X after each column @@ -1464,7 +1465,7 @@ // Beyond the probed grid, continue the implied tilt? // Default is to maintain the height of the nearest edge. - //#define EXTRAPOLATE_BEYOND_GRID + #define EXTRAPOLATE_BEYOND_GRID // // Experimental Subdivision of the grid by Catmull-Rom method. @@ -1518,16 +1519,16 @@ * Add a bed leveling sub-menu for ABL or MBL. * Include a guided procedure if manual probing is enabled. */ -//#define LCD_BED_LEVELING +#define LCD_BED_LEVELING #if ENABLED(LCD_BED_LEVELING) #define MESH_EDIT_Z_STEP 0.025 // (mm) Step size while manually probing Z axis. #define LCD_PROBE_Z_RANGE 4 // (mm) Z Range centered on Z_MIN_POS for LCD Z adjustment - //#define MESH_EDIT_MENU // Add a menu to edit mesh points + #define MESH_EDIT_MENU // Add a menu to edit mesh points #endif // Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS +#define LEVEL_BED_CORNERS #if ENABLED(LEVEL_BED_CORNERS) #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets @@ -1595,7 +1596,7 @@ #endif // Homing speeds (mm/min) -#define HOMING_FEEDRATE_MM_M { (50*60), (50*60), (4*60) } +#define HOMING_FEEDRATE_MM_M { (20*60), (20*60), (4*60) } // Validate that endstops are triggered on homing moves #define VALIDATE_HOMING_ENDSTOPS @@ -1672,12 +1673,12 @@ * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) */ -//#define EEPROM_SETTINGS // Persistent storage with M500 and M501 +#define EEPROM_SETTINGS // Persistent storage with M500 and M501 //#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. #define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load #if ENABLED(EEPROM_SETTINGS) - //#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. + #define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. #endif // @@ -1706,16 +1707,16 @@ // Preheat Constants - Up to 5 are supported without changes // #define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 180 -#define PREHEAT_1_TEMP_BED 70 +#define PREHEAT_1_TEMP_HOTEND 200 +#define PREHEAT_1_TEMP_BED 45 #define PREHEAT_1_TEMP_CHAMBER 35 -#define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 +#define PREHEAT_1_FAN_SPEED 255 // Value from 0 to 255 #define PREHEAT_2_LABEL "ABS" #define PREHEAT_2_TEMP_HOTEND 240 #define PREHEAT_2_TEMP_BED 110 #define PREHEAT_2_TEMP_CHAMBER 35 -#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 +#define PREHEAT_2_FAN_SPEED 255 // Value from 0 to 255 /** * Nozzle Park @@ -1728,7 +1729,7 @@ * P1 Raise the nozzle always to Z-park height. * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. */ -//#define NOZZLE_PARK_FEATURE +#define NOZZLE_PARK_FEATURE #if ENABLED(NOZZLE_PARK_FEATURE) // Specify a park position as { X, Y, Z_raise } @@ -1921,7 +1922,7 @@ * * :['JAPANESE', 'WESTERN', 'CYRILLIC'] */ -#define DISPLAY_CHARSET_HD44780 JAPANESE +#define DISPLAY_CHARSET_HD44780 WESTERN /** * Info Screen Style (0:Classic, 1:Průša) @@ -1936,7 +1937,7 @@ * SD Card support is disabled by default. If your controller has an SD slot, * you must uncomment the following option or it won't work. */ -//#define SDSUPPORT +#define SDSUPPORT /** * SD CARD: ENABLE CRC @@ -2006,7 +2007,7 @@ // // Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. // -//#define INDIVIDUAL_AXIS_HOMING_MENU +#define INDIVIDUAL_AXIS_HOMING_MENU // // SPEAKER/BUZZER @@ -2014,7 +2015,7 @@ // If you have a speaker that can produce tones, enable it here. // By default Marlin assumes you have a buzzer with a fixed frequency. // -//#define SPEAKER +#define SPEAKER // // The duration and frequency for the UI feedback sound. @@ -2287,7 +2288,7 @@ // This is RAMPS-compatible using a single 10-pin connector. // (For CR-10 owners who want to replace the Melzi Creality board but retain the display) // -//#define CR10_STOCKDISPLAY +#define CR10_STOCKDISPLAY // // Ender-2 OEM display, a variant of the MKS_MINI_12864 diff --git a/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h b/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h index 5335fa012a..d8b902e3a9 100644 --- a/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h +++ b/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Creality/Ender-5/BigTreeTech SKR Mini E3 1.2" + /** * Configuration_adv.h * @@ -741,7 +743,7 @@ //#define HOMING_BACKOFF_POST_MM { 2, 2, 2 } // (mm) Backoff from endstops after homing -//#define QUICK_HOME // If G28 contains XY do a diagonal move first +#define QUICK_HOME // If G28 contains XY do a diagonal move first //#define HOME_Y_BEFORE_X // If G28 contains XY home Y before X //#define HOME_Z_FIRST // Home Z first. Requires a Z-MIN endstop (not a probe). //#define CODEPENDENT_XY_HOMING // If X/Y can't home without homing Y/X first @@ -867,7 +869,7 @@ // On a 300mm bed a 5% grade would give a misalignment of ~1.5cm #define G34_MAX_GRADE 5 // (%) Maximum incline that G34 will handle - #define Z_STEPPER_ALIGN_ITERATIONS 5 // Number of iterations to apply during alignment + #define Z_STEPPER_ALIGN_ITERATIONS 3 // Number of iterations to apply during alignment #define Z_STEPPER_ALIGN_ACC 0.02 // Stop iterating early if the accuracy is better than this #define RESTORE_LEVELING_AFTER_G34 // Restore leveling after G34 is done? // After G34, re-home Z (G28 Z) or just calculate it from the last probe heights? @@ -1175,7 +1177,7 @@ #endif // Include a page of printer information in the LCD Main Menu - //#define LCD_INFO_MENU + #define LCD_INFO_MENU #if ENABLED(LCD_INFO_MENU) //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages #endif @@ -1229,13 +1231,13 @@ #endif // Scroll a longer status message into view - //#define STATUS_MESSAGE_SCROLLING + #define STATUS_MESSAGE_SCROLLING // On the Info Screen, display XY with one decimal place when possible //#define LCD_DECIMAL_SMALL_XY // Add an 'M73' G-code to set the current percentage - //#define LCD_SET_PROGRESS_MANUALLY + #define LCD_SET_PROGRESS_MANUALLY // Show the E position (filament used) during printing //#define LCD_SHOW_E_TOTAL @@ -1361,16 +1363,16 @@ * - SDSORT_CACHE_NAMES will retain the sorted file listing in RAM. (Expensive!) * - SDSORT_DYNAMIC_RAM only uses RAM when the SD menu is visible. (Use with caution!) */ - //#define SDCARD_SORT_ALPHA + #define SDCARD_SORT_ALPHA // SD Card Sorting options #if ENABLED(SDCARD_SORT_ALPHA) #define SDSORT_LIMIT 40 // Maximum number of sorted items (10-256). Costs 27 bytes each. #define FOLDER_SORTING -1 // -1=above 0=none 1=below #define SDSORT_GCODE false // Allow turning sorting on/off with LCD and M34 G-code. - #define SDSORT_USES_RAM false // Pre-allocate a static array for faster pre-sorting. + #define SDSORT_USES_RAM true // Pre-allocate a static array for faster pre-sorting. #define SDSORT_USES_STACK false // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.) - #define SDSORT_CACHE_NAMES false // Keep sorted items in RAM longer for speedy performance. Most expensive option. + #define SDSORT_CACHE_NAMES true // Keep sorted items in RAM longer for speedy performance. Most expensive option. #define SDSORT_DYNAMIC_RAM false // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use! #define SDSORT_CACHE_VFATS 2 // Maximum number of 13-byte VFAT entries to use for sorting. // Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM. @@ -1381,10 +1383,10 @@ //#define UTF_FILENAME_SUPPORT // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT + #define LONG_FILENAME_HOST_SUPPORT // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES + #define SCROLL_LONG_FILENAMES // Leave the heaters on after Stop Print (not recommended!) //#define SD_ABORT_NO_COOLDOWN @@ -1476,7 +1478,7 @@ * * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] */ - //#define SDCARD_CONNECTION LCD + #define SDCARD_CONNECTION ONBOARD // Enable if SD detect is rendered useless (e.g., by using an SD extender) //#define NO_SD_DETECT @@ -1790,7 +1792,7 @@ * * Warning: Does not respect endstops! */ -//#define BABYSTEPPING +#define BABYSTEPPING #if ENABLED(BABYSTEPPING) //#define INTEGRATED_BABYSTEPPING // EXPERIMENTAL integration of babystepping into the Stepper ISR //#define BABYSTEP_WITHOUT_HOMING @@ -1801,7 +1803,7 @@ #define BABYSTEP_MULTIPLICATOR_Z 1 // (steps or mm) Steps or millimeter distance for each Z babystep #define BABYSTEP_MULTIPLICATOR_XY 1 // (steps or mm) Steps or millimeter distance for each XY babystep - //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. + #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. // Note: Extra time may be added to mitigate controller latency. @@ -1837,12 +1839,12 @@ * * See https://marlinfw.org/docs/features/lin_advance.html for full instructions. */ -//#define LIN_ADVANCE +#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) //#define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants - #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed + #define LIN_ADVANCE_K 0.0 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // If enabled, this will generate debug information output over USB. - //#define EXPERIMENTAL_SCURVE // Enable this option to permit S-Curve Acceleration + #define EXPERIMENTAL_SCURVE // Enable this option to permit S-Curve Acceleration #endif // @section leveling @@ -1982,7 +1984,7 @@ // // G2/G3 Arc Support // -#define ARC_SUPPORT // Disable this feature to save ~3226 bytes +//#define ARC_SUPPORT // Disable this feature to save ~3226 bytes #if ENABLED(ARC_SUPPORT) #define MM_PER_ARC_SEGMENT 1 // (mm) Length (or minimum length) of each arc segment //#define ARC_SEGMENTS_PER_R 1 // Max segment length, MM_PER = Min @@ -2141,7 +2143,7 @@ * Currently handles M108, M112, M410, M876 * NOTE: Not yet implemented for all platforms. */ -//#define EMERGENCY_PARSER +#define EMERGENCY_PARSER /** * Realtime Reporting (requires EMERGENCY_PARSER) @@ -2311,14 +2313,14 @@ * * Enable PARK_HEAD_ON_PAUSE to add the G-code M125 Pause and Park. */ -//#define ADVANCED_PAUSE_FEATURE +#define ADVANCED_PAUSE_FEATURE #if ENABLED(ADVANCED_PAUSE_FEATURE) #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. // This short retract is done immediately, before parking the nozzle. #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast. #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload. + #define FILAMENT_CHANGE_UNLOAD_LENGTH 400 // (mm) The length of filament for a complete unload. // For Bowden, the full length of the tube and nozzle. // For direct drive, the full length of the nozzle. // Set to 0 for manual unloading. @@ -2327,7 +2329,7 @@ // 0 to disable start loading and skip to fast load only #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast. #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle. + #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 350 // (mm) Load length of filament, from extruder gear to nozzle. // For Bowden, the full length of the tube and nozzle. // For direct drive, the full length of the nozzle. //#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted. @@ -2352,7 +2354,7 @@ //#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. //#define HOME_BEFORE_FILAMENT_CHANGE // If needed, home before parking for filament change - //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. + #define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) #endif @@ -2493,7 +2495,7 @@ #define INTERPOLATE true #if AXIS_IS_TMC(X) - #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. + #define X_CURRENT 580 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for sensorless homing #define X_MICROSTEPS 16 // 0..256 #define X_RSENSE 0.11 @@ -2511,7 +2513,7 @@ #endif #if AXIS_IS_TMC(Y) - #define Y_CURRENT 800 + #define Y_CURRENT 580 #define Y_CURRENT_HOME Y_CURRENT #define Y_MICROSTEPS 16 #define Y_RSENSE 0.11 @@ -2529,7 +2531,7 @@ #endif #if AXIS_IS_TMC(Z) - #define Z_CURRENT 800 + #define Z_CURRENT 580 #define Z_CURRENT_HOME Z_CURRENT #define Z_MICROSTEPS 16 #define Z_RSENSE 0.11 @@ -2565,7 +2567,7 @@ #endif #if AXIS_IS_TMC(E0) - #define E0_CURRENT 800 + #define E0_CURRENT 650 #define E0_MICROSTEPS 16 #define E0_RSENSE 0.11 #define E0_CHAIN_POS -1 @@ -2719,7 +2721,7 @@ * Define your own with: * { , , hysteresis_start[1..8] } */ - #define CHOPPER_TIMING CHOPPER_DEFAULT_12V // All axes (override below) + #define CHOPPER_TIMING CHOPPER_DEFAULT_24V // All axes (override below) //#define CHOPPER_TIMING_X CHOPPER_TIMING // For X Axes (override below) //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X //#define CHOPPER_TIMING_Y CHOPPER_TIMING // For Y Axes (override below) @@ -2839,7 +2841,7 @@ * Beta feature! * Create a 50/50 square wave step pulse optimal for stepper drivers. */ - //#define SQUARE_WAVE_STEPPING + #define SQUARE_WAVE_STEPPING /** * Enable M122 debugging command for TMC stepper drivers. diff --git a/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 2.0/Configuration.h b/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 2.0/Configuration.h index 78c2dc9160..de9bfcfc62 100644 --- a/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 2.0/Configuration.h +++ b/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 2.0/Configuration.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Creality/Ender-5/BigTreeTech SKR Mini E3 2.0" + /** * Configuration.h * @@ -69,7 +71,7 @@ // @section info // Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes. +#define STRING_CONFIG_H_AUTHOR "(uaraven, Ender-5-SKR-mini-E3-V2.0)" // Who made the changes. //#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) /** @@ -87,10 +89,10 @@ #define SHOW_BOOTSCREEN // Show the bitmap in Marlin/_Bootscreen.h on startup. -//#define SHOW_CUSTOM_BOOTSCREEN +#define SHOW_CUSTOM_BOOTSCREEN // Show the bitmap in Marlin/_Statusscreen.h on the status screen. -//#define CUSTOM_STATUS_SCREEN_IMAGE +#define CUSTOM_STATUS_SCREEN_IMAGE // @section machine @@ -102,14 +104,14 @@ * * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] */ -#define SERIAL_PORT 0 +#define SERIAL_PORT 2 /** * Select a secondary serial port on the board to use for communication with the host. * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] */ -//#define SERIAL_PORT_2 -1 +#define SERIAL_PORT_2 -1 /** * Select a third serial port on the board to use for communication with the host. @@ -127,18 +129,18 @@ * * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ -#define BAUDRATE 250000 +#define BAUDRATE 115200 // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH // Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_RAMPS_14_EFB + #define MOTHERBOARD BOARD_BTT_SKR_MINI_E3_V2_0 #endif // Name displayed in the LCD "Ready" message and Info menu -//#define CUSTOM_MACHINE_NAME "3D Printer" +#define CUSTOM_MACHINE_NAME "Ender-5" // Printer's unique ID, used by some programs to differentiate between machines. // Choose your own or use a service like https://www.uuidgenerator.net/version4 @@ -322,7 +324,7 @@ //#define PSU_NAME "Power Supply" #if ENABLED(PSU_CONTROL) - #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box + #define PSU_ACTIVE_STATE HIGH // Set 'LOW' for ATX, 'HIGH' for X-Box //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power @@ -424,7 +426,7 @@ #define TEMP_SENSOR_5 0 #define TEMP_SENSOR_6 0 #define TEMP_SENSOR_7 0 -#define TEMP_SENSOR_BED 0 +#define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 #define TEMP_SENSOR_COOLER 0 @@ -480,7 +482,7 @@ #define HEATER_5_MAXTEMP 275 #define HEATER_6_MAXTEMP 275 #define HEATER_7_MAXTEMP 275 -#define BED_MAXTEMP 150 +#define BED_MAXTEMP 125 #define CHAMBER_MAXTEMP 60 /** @@ -510,16 +512,17 @@ //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) // Set/get with gcode: M301 E[extruder number, 0-2] + // Creality Ender-5 #if ENABLED(PID_PARAMS_PER_HOTEND) // Specify between 1 and HOTENDS values per array. // If fewer than EXTRUDER values are provided, the last element will be repeated. - #define DEFAULT_Kp_LIST { 22.20, 22.20 } - #define DEFAULT_Ki_LIST { 1.08, 1.08 } - #define DEFAULT_Kd_LIST { 114.00, 114.00 } + #define DEFAULT_Kp_LIST { 21.73, 21.73 } + #define DEFAULT_Ki_LIST { 1.54, 1.54 } + #define DEFAULT_Kd_LIST { 76.55, 76.55 } #else - #define DEFAULT_Kp 22.20 - #define DEFAULT_Ki 1.08 - #define DEFAULT_Kd 114.00 + #define DEFAULT_Kp 21.73 + #define DEFAULT_Ki 1.54 + #define DEFAULT_Kd 76.55 #endif #endif // PIDTEMP @@ -540,7 +543,7 @@ * heater. If your configuration is significantly different than this and you don't understand * the issues involved, don't use bed PID until someone else verifies that your hardware works. */ -//#define PIDTEMPBED +#define PIDTEMPBED //#define BED_LIMIT_SWITCHING @@ -556,11 +559,9 @@ //#define MIN_BED_POWER 0 //#define PID_BED_DEBUG // Sends debug data to the serial port. - // 120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - // from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) - #define DEFAULT_bedKp 10.00 - #define DEFAULT_bedKi .023 - #define DEFAULT_bedKd 305.4 + #define DEFAULT_bedKp 50.71 + #define DEFAULT_bedKi 9.88 + #define DEFAULT_bedKd 173.43 // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. #endif // PIDTEMPBED @@ -634,7 +635,7 @@ * Note: For Bowden Extruders make this large enough to allow load/unload. */ #define PREVENT_LENGTHY_EXTRUDE -#define EXTRUDE_MAXLENGTH 200 +#define EXTRUDE_MAXLENGTH 600 //=========================================================================== //======================== Thermal Runaway Protection ======================= @@ -683,11 +684,11 @@ // Specify here all the endstop connectors that are connected to any endstop or probe. // Almost all printers will be using one per axis. Probes will use one or more of the // extra connectors. Leave undefined any used for non-endstop and non-probe purposes. -#define USE_XMIN_PLUG -#define USE_YMIN_PLUG +//#define USE_XMIN_PLUG +//#define USE_YMIN_PLUG #define USE_ZMIN_PLUG -//#define USE_XMAX_PLUG -//#define USE_YMAX_PLUG +#define USE_XMAX_PLUG +#define USE_YMAX_PLUG //#define USE_ZMAX_PLUG // Enable pullup for all endstops to prevent a floating state @@ -743,15 +744,15 @@ * TMC5130, TMC5130_STANDALONE, TMC5160, TMC5160_STANDALONE * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'L6474', 'POWERSTEP01', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2160', 'TMC2160_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC2209', 'TMC2209_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE', 'TMC5160', 'TMC5160_STANDALONE'] */ -#define X_DRIVER_TYPE A4988 -#define Y_DRIVER_TYPE A4988 -#define Z_DRIVER_TYPE A4988 +#define X_DRIVER_TYPE TMC2209 +#define Y_DRIVER_TYPE TMC2209 +#define Z_DRIVER_TYPE TMC2209 //#define X2_DRIVER_TYPE A4988 //#define Y2_DRIVER_TYPE A4988 //#define Z2_DRIVER_TYPE A4988 //#define Z3_DRIVER_TYPE A4988 //#define Z4_DRIVER_TYPE A4988 -#define E0_DRIVER_TYPE A4988 +#define E0_DRIVER_TYPE TMC2209 //#define E1_DRIVER_TYPE A4988 //#define E2_DRIVER_TYPE A4988 //#define E3_DRIVER_TYPE A4988 @@ -806,14 +807,14 @@ * Override with M92 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 500 } +#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 800, 93 } /** * Default Max Feed Rate (mm/s) * Override with M203 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 } +#define DEFAULT_MAX_FEEDRATE { 500, 500, 5, 25 } //#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 #if ENABLED(LIMITED_MAX_FR_EDITING) @@ -826,7 +827,7 @@ * Override with M201 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 } +#define DEFAULT_MAX_ACCELERATION { 500, 500, 100, 5000 } //#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 #if ENABLED(LIMITED_MAX_ACCEL_EDITING) @@ -841,9 +842,9 @@ * M204 R Retract Acceleration * M204 T Travel Acceleration */ -#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves +#define DEFAULT_ACCELERATION 500 // X, Y, Z and E acceleration for printing moves +#define DEFAULT_RETRACT_ACCELERATION 500 // E acceleration for retracts +#define DEFAULT_TRAVEL_ACCELERATION 500 // X, Y, Z acceleration for travel (non printing) moves /** * Default Jerk limits (mm/s) @@ -877,7 +878,7 @@ * https://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html */ #if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.013 // (mm) Distance from real junction edge + #define JUNCTION_DEVIATION_MM 0.08 // (mm) Distance from real junction edge #define JD_HANDLE_SMALL_SEGMENTS // Use curvature estimation instead of just the junction angle // for small segments (< 1mm) with large junction angles (> 135°). #endif @@ -1190,14 +1191,14 @@ // @section machine // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR false +#define INVERT_X_DIR true #define INVERT_Y_DIR true -#define INVERT_Z_DIR false +#define INVERT_Z_DIR true // @section extruder // For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR false +#define INVERT_E0_DIR true #define INVERT_E1_DIR false #define INVERT_E2_DIR false #define INVERT_E3_DIR false @@ -1225,15 +1226,15 @@ // Direction of endstops when homing; 1=MAX, -1=MIN // :[-1,1] -#define X_HOME_DIR -1 -#define Y_HOME_DIR -1 +#define X_HOME_DIR 1 +#define Y_HOME_DIR 1 #define Z_HOME_DIR -1 // @section machine // The size of the printable area -#define X_BED_SIZE 200 -#define Y_BED_SIZE 200 +#define X_BED_SIZE 220 +#define Y_BED_SIZE 220 // Travel limits (mm) after homing, corresponding to endstop positions. #define X_MIN_POS 0 @@ -1241,7 +1242,7 @@ #define Z_MIN_POS 0 #define X_MAX_POS X_BED_SIZE #define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 200 +#define Z_MAX_POS 300 /** * Software Endstops @@ -1290,7 +1291,7 @@ #define FIL_RUNOUT_ENABLED_DEFAULT true // Enable the sensor on startup. Override with M412 followed by M500. #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. - #define FIL_RUNOUT_STATE LOW // Pin state indicating that filament is NOT present. + #define FIL_RUNOUT_STATE HIGH // Pin state indicating that filament is NOT present. #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. //#define WATCH_ALL_RUNOUT_SENSORS // Execute runout script on any triggering sensor, not only for the active extruder. @@ -1337,7 +1338,7 @@ // After a runout is detected, continue printing this length of filament // before executing the runout script. Useful for a sensor at the end of // a feed tube. Requires 4 bytes SRAM per sensor, plus 4 bytes overhead. - //#define FILAMENT_RUNOUT_DISTANCE_MM 25 + //#define FILAMENT_RUNOUT_DISTANCE_MM 7 #ifdef FILAMENT_RUNOUT_DISTANCE_MM // Enable this option to use an encoder disc that toggles the runout pin @@ -1389,14 +1390,14 @@ //#define AUTO_BED_LEVELING_LINEAR //#define AUTO_BED_LEVELING_BILINEAR //#define AUTO_BED_LEVELING_UBL -//#define MESH_BED_LEVELING +#define MESH_BED_LEVELING /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable * leveling immediately after G28. */ -//#define RESTORE_LEVELING_AFTER_G28 +#define RESTORE_LEVELING_AFTER_G28 //#define ENABLE_LEVELING_AFTER_G28 /** @@ -1454,7 +1455,7 @@ #if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR) // Set the number of grid points per dimension. - #define GRID_MAX_POINTS_X 3 + #define GRID_MAX_POINTS_X 5 #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X // Probe along the Y axis, advancing X after each column @@ -1464,7 +1465,7 @@ // Beyond the probed grid, continue the implied tilt? // Default is to maintain the height of the nearest edge. - //#define EXTRAPOLATE_BEYOND_GRID + #define EXTRAPOLATE_BEYOND_GRID // // Experimental Subdivision of the grid by Catmull-Rom method. @@ -1518,16 +1519,16 @@ * Add a bed leveling sub-menu for ABL or MBL. * Include a guided procedure if manual probing is enabled. */ -//#define LCD_BED_LEVELING +#define LCD_BED_LEVELING #if ENABLED(LCD_BED_LEVELING) #define MESH_EDIT_Z_STEP 0.025 // (mm) Step size while manually probing Z axis. #define LCD_PROBE_Z_RANGE 4 // (mm) Z Range centered on Z_MIN_POS for LCD Z adjustment - //#define MESH_EDIT_MENU // Add a menu to edit mesh points + #define MESH_EDIT_MENU // Add a menu to edit mesh points #endif // Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS +#define LEVEL_BED_CORNERS #if ENABLED(LEVEL_BED_CORNERS) #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets @@ -1672,12 +1673,12 @@ * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) */ -//#define EEPROM_SETTINGS // Persistent storage with M500 and M501 +#define EEPROM_SETTINGS // Persistent storage with M500 and M501 //#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. #define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load #if ENABLED(EEPROM_SETTINGS) - //#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. + #define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. #endif // @@ -1706,16 +1707,16 @@ // Preheat Constants - Up to 5 are supported without changes // #define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 180 -#define PREHEAT_1_TEMP_BED 70 +#define PREHEAT_1_TEMP_HOTEND 200 +#define PREHEAT_1_TEMP_BED 60 #define PREHEAT_1_TEMP_CHAMBER 35 -#define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 +#define PREHEAT_1_FAN_SPEED 255 // Value from 0 to 255 -#define PREHEAT_2_LABEL "ABS" -#define PREHEAT_2_TEMP_HOTEND 240 -#define PREHEAT_2_TEMP_BED 110 +#define PREHEAT_2_LABEL "PETG" +#define PREHEAT_2_TEMP_HOTEND 235 +#define PREHEAT_2_TEMP_BED 80 #define PREHEAT_2_TEMP_CHAMBER 35 -#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 +#define PREHEAT_2_FAN_SPEED 255 // Value from 0 to 255 /** * Nozzle Park @@ -1728,7 +1729,7 @@ * P1 Raise the nozzle always to Z-park height. * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. */ -//#define NOZZLE_PARK_FEATURE +#define NOZZLE_PARK_FEATURE #if ENABLED(NOZZLE_PARK_FEATURE) // Specify a park position as { X, Y, Z_raise } @@ -1936,7 +1937,7 @@ * SD Card support is disabled by default. If your controller has an SD slot, * you must uncomment the following option or it won't work. */ -//#define SDSUPPORT +#define SDSUPPORT /** * SD CARD: ENABLE CRC @@ -2287,7 +2288,7 @@ // This is RAMPS-compatible using a single 10-pin connector. // (For CR-10 owners who want to replace the Melzi Creality board but retain the display) // -//#define CR10_STOCKDISPLAY +#define CR10_STOCKDISPLAY // // Ender-2 OEM display, a variant of the MKS_MINI_12864 @@ -2684,11 +2685,11 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - #define NEOPIXEL_PIN 4 // LED driving pin + #define NEOPIXEL_TYPE NEO_GRB // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + //#define NEOPIXEL_PIN 4 // LED driving pin //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_PIXELS 10 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup diff --git a/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h b/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h index 5335fa012a..0fea349819 100644 --- a/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h +++ b/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Creality/Ender-5/BigTreeTech SKR Mini E3 2.0" + /** * Configuration_adv.h * @@ -461,7 +463,7 @@ * The fan turns on automatically whenever any driver is enabled and turns * off (or reduces to idle speed) shortly after drivers are turned off. */ -//#define USE_CONTROLLER_FAN +#define USE_CONTROLLER_FAN #if ENABLED(USE_CONTROLLER_FAN) //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan //#define CONTROLLER_FAN_USE_Z_ONLY // With this option only the Z axis is considered @@ -470,7 +472,7 @@ #define CONTROLLERFAN_SPEED_ACTIVE 255 // (0-255) Active speed, used when any motor is enabled #define CONTROLLERFAN_SPEED_IDLE 0 // (0-255) Idle speed, used when motors are disabled #define CONTROLLERFAN_IDLE_TIME 60 // (seconds) Extra time to keep the fan running after disabling motors - //#define CONTROLLER_FAN_EDITABLE // Enable M710 configurable settings + #define CONTROLLER_FAN_EDITABLE // Enable M710 configurable settings #if ENABLED(CONTROLLER_FAN_EDITABLE) #define CONTROLLER_FAN_MENU // Enable the Controller Fan submenu #endif @@ -741,7 +743,7 @@ //#define HOMING_BACKOFF_POST_MM { 2, 2, 2 } // (mm) Backoff from endstops after homing -//#define QUICK_HOME // If G28 contains XY do a diagonal move first +#define QUICK_HOME // If G28 contains XY do a diagonal move first //#define HOME_Y_BEFORE_X // If G28 contains XY home Y before X //#define HOME_Z_FIRST // Home Z first. Requires a Z-MIN endstop (not a probe). //#define CODEPENDENT_XY_HOMING // If X/Y can't home without homing Y/X first @@ -867,7 +869,7 @@ // On a 300mm bed a 5% grade would give a misalignment of ~1.5cm #define G34_MAX_GRADE 5 // (%) Maximum incline that G34 will handle - #define Z_STEPPER_ALIGN_ITERATIONS 5 // Number of iterations to apply during alignment + #define Z_STEPPER_ALIGN_ITERATIONS 3 // Number of iterations to apply during alignment #define Z_STEPPER_ALIGN_ACC 0.02 // Stop iterating early if the accuracy is better than this #define RESTORE_LEVELING_AFTER_G34 // Restore leveling after G34 is done? // After G34, re-home Z (G28 Z) or just calculate it from the last probe heights? @@ -1175,7 +1177,7 @@ #endif // Include a page of printer information in the LCD Main Menu - //#define LCD_INFO_MENU + #define LCD_INFO_MENU #if ENABLED(LCD_INFO_MENU) //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages #endif @@ -1229,13 +1231,13 @@ #endif // Scroll a longer status message into view - //#define STATUS_MESSAGE_SCROLLING + #define STATUS_MESSAGE_SCROLLING // On the Info Screen, display XY with one decimal place when possible //#define LCD_DECIMAL_SMALL_XY // Add an 'M73' G-code to set the current percentage - //#define LCD_SET_PROGRESS_MANUALLY + #define LCD_SET_PROGRESS_MANUALLY // Show the E position (filament used) during printing //#define LCD_SHOW_E_TOTAL @@ -1361,16 +1363,16 @@ * - SDSORT_CACHE_NAMES will retain the sorted file listing in RAM. (Expensive!) * - SDSORT_DYNAMIC_RAM only uses RAM when the SD menu is visible. (Use with caution!) */ - //#define SDCARD_SORT_ALPHA + #define SDCARD_SORT_ALPHA // SD Card Sorting options #if ENABLED(SDCARD_SORT_ALPHA) #define SDSORT_LIMIT 40 // Maximum number of sorted items (10-256). Costs 27 bytes each. #define FOLDER_SORTING -1 // -1=above 0=none 1=below #define SDSORT_GCODE false // Allow turning sorting on/off with LCD and M34 G-code. - #define SDSORT_USES_RAM false // Pre-allocate a static array for faster pre-sorting. + #define SDSORT_USES_RAM true // Pre-allocate a static array for faster pre-sorting. #define SDSORT_USES_STACK false // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.) - #define SDSORT_CACHE_NAMES false // Keep sorted items in RAM longer for speedy performance. Most expensive option. + #define SDSORT_CACHE_NAMES true // Keep sorted items in RAM longer for speedy performance. Most expensive option. #define SDSORT_DYNAMIC_RAM false // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use! #define SDSORT_CACHE_VFATS 2 // Maximum number of 13-byte VFAT entries to use for sorting. // Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM. @@ -1381,10 +1383,10 @@ //#define UTF_FILENAME_SUPPORT // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT + #define LONG_FILENAME_HOST_SUPPORT // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES + #define SCROLL_LONG_FILENAMES // Leave the heaters on after Stop Print (not recommended!) //#define SD_ABORT_NO_COOLDOWN @@ -1476,7 +1478,7 @@ * * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] */ - //#define SDCARD_CONNECTION LCD + #define SDCARD_CONNECTION ONBOARD // Enable if SD detect is rendered useless (e.g., by using an SD extender) //#define NO_SD_DETECT @@ -1790,7 +1792,7 @@ * * Warning: Does not respect endstops! */ -//#define BABYSTEPPING +#define BABYSTEPPING #if ENABLED(BABYSTEPPING) //#define INTEGRATED_BABYSTEPPING // EXPERIMENTAL integration of babystepping into the Stepper ISR //#define BABYSTEP_WITHOUT_HOMING @@ -1801,7 +1803,7 @@ #define BABYSTEP_MULTIPLICATOR_Z 1 // (steps or mm) Steps or millimeter distance for each Z babystep #define BABYSTEP_MULTIPLICATOR_XY 1 // (steps or mm) Steps or millimeter distance for each XY babystep - //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. + #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. // Note: Extra time may be added to mitigate controller latency. @@ -1837,12 +1839,12 @@ * * See https://marlinfw.org/docs/features/lin_advance.html for full instructions. */ -//#define LIN_ADVANCE +#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) //#define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants - #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed + #define LIN_ADVANCE_K 0.0 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // If enabled, this will generate debug information output over USB. - //#define EXPERIMENTAL_SCURVE // Enable this option to permit S-Curve Acceleration + #define EXPERIMENTAL_SCURVE // Enable this option to permit S-Curve Acceleration #endif // @section leveling @@ -1982,7 +1984,7 @@ // // G2/G3 Arc Support // -#define ARC_SUPPORT // Disable this feature to save ~3226 bytes +//#define ARC_SUPPORT // Disable this feature to save ~3226 bytes #if ENABLED(ARC_SUPPORT) #define MM_PER_ARC_SEGMENT 1 // (mm) Length (or minimum length) of each arc segment //#define ARC_SEGMENTS_PER_R 1 // Max segment length, MM_PER = Min @@ -2141,7 +2143,7 @@ * Currently handles M108, M112, M410, M876 * NOTE: Not yet implemented for all platforms. */ -//#define EMERGENCY_PARSER +#define EMERGENCY_PARSER /** * Realtime Reporting (requires EMERGENCY_PARSER) @@ -2311,14 +2313,14 @@ * * Enable PARK_HEAD_ON_PAUSE to add the G-code M125 Pause and Park. */ -//#define ADVANCED_PAUSE_FEATURE +#define ADVANCED_PAUSE_FEATURE #if ENABLED(ADVANCED_PAUSE_FEATURE) #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. // This short retract is done immediately, before parking the nozzle. #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast. #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload. + #define FILAMENT_CHANGE_UNLOAD_LENGTH 550 // (mm) The length of filament for a complete unload. // For Bowden, the full length of the tube and nozzle. // For direct drive, the full length of the nozzle. // Set to 0 for manual unloading. @@ -2327,7 +2329,7 @@ // 0 to disable start loading and skip to fast load only #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast. #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle. + #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 350 // (mm) Load length of filament, from extruder gear to nozzle. // For Bowden, the full length of the tube and nozzle. // For direct drive, the full length of the nozzle. //#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted. @@ -2349,10 +2351,10 @@ #define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed. #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change. - //#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. - //#define HOME_BEFORE_FILAMENT_CHANGE // If needed, home before parking for filament change + #define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. + #define HOME_BEFORE_FILAMENT_CHANGE // If needed, home before parking for filament change - //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. + #define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) #endif @@ -2493,8 +2495,8 @@ #define INTERPOLATE true #if AXIS_IS_TMC(X) - #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. - #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for sensorless homing + #define X_CURRENT 580 // (mA) RMS current. Multiply by 1.414 for peak current. + #define X_CURRENT_HOME (X_CURRENT/2) // (mA) RMS current for sensorless homing #define X_MICROSTEPS 16 // 0..256 #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... @@ -2511,8 +2513,8 @@ #endif #if AXIS_IS_TMC(Y) - #define Y_CURRENT 800 - #define Y_CURRENT_HOME Y_CURRENT + #define Y_CURRENT 580 + #define Y_CURRENT_HOME (Y_CURRENT/2) #define Y_MICROSTEPS 16 #define Y_RSENSE 0.11 #define Y_CHAIN_POS -1 @@ -2529,7 +2531,7 @@ #endif #if AXIS_IS_TMC(Z) - #define Z_CURRENT 800 + #define Z_CURRENT 580 #define Z_CURRENT_HOME Z_CURRENT #define Z_MICROSTEPS 16 #define Z_RSENSE 0.11 @@ -2565,7 +2567,7 @@ #endif #if AXIS_IS_TMC(E0) - #define E0_CURRENT 800 + #define E0_CURRENT 650 #define E0_MICROSTEPS 16 #define E0_RSENSE 0.11 #define E0_CHAIN_POS -1 @@ -2670,15 +2672,15 @@ * Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers * on the same serial port, either here or in your board's pins file. */ - //#define X_SLAVE_ADDRESS 0 - //#define Y_SLAVE_ADDRESS 0 - //#define Z_SLAVE_ADDRESS 0 + #define X_SLAVE_ADDRESS 0 + #define Y_SLAVE_ADDRESS 2 + #define Z_SLAVE_ADDRESS 1 //#define X2_SLAVE_ADDRESS 0 //#define Y2_SLAVE_ADDRESS 0 //#define Z2_SLAVE_ADDRESS 0 //#define Z3_SLAVE_ADDRESS 0 //#define Z4_SLAVE_ADDRESS 0 - //#define E0_SLAVE_ADDRESS 0 + #define E0_SLAVE_ADDRESS 3 //#define E1_SLAVE_ADDRESS 0 //#define E2_SLAVE_ADDRESS 0 //#define E3_SLAVE_ADDRESS 0 @@ -2719,7 +2721,7 @@ * Define your own with: * { , , hysteresis_start[1..8] } */ - #define CHOPPER_TIMING CHOPPER_DEFAULT_12V // All axes (override below) + #define CHOPPER_TIMING CHOPPER_DEFAULT_24V // All axes (override below) //#define CHOPPER_TIMING_X CHOPPER_TIMING // For X Axes (override below) //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X //#define CHOPPER_TIMING_Y CHOPPER_TIMING // For Y Axes (override below) @@ -2811,16 +2813,16 @@ #if EITHER(SENSORLESS_HOMING, SENSORLESS_PROBING) // TMC2209: 0...255. TMC2130: -64...63 - #define X_STALL_SENSITIVITY 8 + #define X_STALL_SENSITIVITY 75 #define X2_STALL_SENSITIVITY X_STALL_SENSITIVITY - #define Y_STALL_SENSITIVITY 8 + #define Y_STALL_SENSITIVITY 75 #define Y2_STALL_SENSITIVITY Y_STALL_SENSITIVITY //#define Z_STALL_SENSITIVITY 8 //#define Z2_STALL_SENSITIVITY Z_STALL_SENSITIVITY //#define Z3_STALL_SENSITIVITY Z_STALL_SENSITIVITY //#define Z4_STALL_SENSITIVITY Z_STALL_SENSITIVITY //#define SPI_ENDSTOPS // TMC2130 only - //#define IMPROVE_HOMING_RELIABILITY + #define IMPROVE_HOMING_RELIABILITY #endif /** @@ -2839,7 +2841,7 @@ * Beta feature! * Create a 50/50 square wave step pulse optimal for stepper drivers. */ - //#define SQUARE_WAVE_STEPPING + #define SQUARE_WAVE_STEPPING /** * Enable M122 debugging command for TMC stepper drivers. diff --git a/config/examples/Creality/Ender-5/CrealityV1/Configuration.h b/config/examples/Creality/Ender-5/CrealityV1/Configuration.h index 78c2dc9160..482a3432c2 100644 --- a/config/examples/Creality/Ender-5/CrealityV1/Configuration.h +++ b/config/examples/Creality/Ender-5/CrealityV1/Configuration.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Creality/Ender-5/CrealityV1" + /** * Configuration.h * @@ -69,7 +71,7 @@ // @section info // Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes. +#define STRING_CONFIG_H_AUTHOR "(thisiskeithb, Ender-5)" // Who made the changes. //#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) /** @@ -87,10 +89,10 @@ #define SHOW_BOOTSCREEN // Show the bitmap in Marlin/_Bootscreen.h on startup. -//#define SHOW_CUSTOM_BOOTSCREEN +#define SHOW_CUSTOM_BOOTSCREEN // Show the bitmap in Marlin/_Statusscreen.h on the status screen. -//#define CUSTOM_STATUS_SCREEN_IMAGE +#define CUSTOM_STATUS_SCREEN_IMAGE // @section machine @@ -127,18 +129,18 @@ * * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ -#define BAUDRATE 250000 +#define BAUDRATE 115200 // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH // Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_RAMPS_14_EFB + #define MOTHERBOARD BOARD_MELZI_CREALITY #endif // Name displayed in the LCD "Ready" message and Info menu -//#define CUSTOM_MACHINE_NAME "3D Printer" +#define CUSTOM_MACHINE_NAME "Ender-5" // Printer's unique ID, used by some programs to differentiate between machines. // Choose your own or use a service like https://www.uuidgenerator.net/version4 @@ -424,7 +426,7 @@ #define TEMP_SENSOR_5 0 #define TEMP_SENSOR_6 0 #define TEMP_SENSOR_7 0 -#define TEMP_SENSOR_BED 0 +#define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 #define TEMP_SENSOR_COOLER 0 @@ -480,7 +482,7 @@ #define HEATER_5_MAXTEMP 275 #define HEATER_6_MAXTEMP 275 #define HEATER_7_MAXTEMP 275 -#define BED_MAXTEMP 150 +#define BED_MAXTEMP 125 #define CHAMBER_MAXTEMP 60 /** @@ -505,21 +507,22 @@ #define PID_K1 0.95 // Smoothing factor within any PID loop #if ENABLED(PIDTEMP) - //#define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) - //#define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) + #define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) + #define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) // Set/get with gcode: M301 E[extruder number, 0-2] + // Creality Ender-5 #if ENABLED(PID_PARAMS_PER_HOTEND) // Specify between 1 and HOTENDS values per array. // If fewer than EXTRUDER values are provided, the last element will be repeated. - #define DEFAULT_Kp_LIST { 22.20, 22.20 } - #define DEFAULT_Ki_LIST { 1.08, 1.08 } - #define DEFAULT_Kd_LIST { 114.00, 114.00 } + #define DEFAULT_Kp_LIST { 21.73, 21.73 } + #define DEFAULT_Ki_LIST { 1.54, 1.54 } + #define DEFAULT_Kd_LIST { 76.55, 76.55 } #else - #define DEFAULT_Kp 22.20 - #define DEFAULT_Ki 1.08 - #define DEFAULT_Kd 114.00 + #define DEFAULT_Kp 21.73 + #define DEFAULT_Ki 1.54 + #define DEFAULT_Kd 76.55 #endif #endif // PIDTEMP @@ -683,11 +686,11 @@ // Specify here all the endstop connectors that are connected to any endstop or probe. // Almost all printers will be using one per axis. Probes will use one or more of the // extra connectors. Leave undefined any used for non-endstop and non-probe purposes. -#define USE_XMIN_PLUG -#define USE_YMIN_PLUG +//#define USE_XMIN_PLUG +//#define USE_YMIN_PLUG #define USE_ZMIN_PLUG -//#define USE_XMAX_PLUG -//#define USE_YMAX_PLUG +#define USE_XMAX_PLUG +#define USE_YMAX_PLUG //#define USE_ZMAX_PLUG // Enable pullup for all endstops to prevent a floating state @@ -806,14 +809,14 @@ * Override with M92 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 500 } +#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 93 } /** * Default Max Feed Rate (mm/s) * Override with M203 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 } +#define DEFAULT_MAX_FEEDRATE { 500, 500, 5, 25 } //#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 #if ENABLED(LIMITED_MAX_FR_EDITING) @@ -826,7 +829,7 @@ * Override with M201 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 } +#define DEFAULT_MAX_ACCELERATION { 500, 500, 100, 5000 } //#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 #if ENABLED(LIMITED_MAX_ACCEL_EDITING) @@ -841,9 +844,9 @@ * M204 R Retract Acceleration * M204 T Travel Acceleration */ -#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves +#define DEFAULT_ACCELERATION 500 // X, Y, Z and E acceleration for printing moves +#define DEFAULT_RETRACT_ACCELERATION 500 // E acceleration for retracts +#define DEFAULT_TRAVEL_ACCELERATION 500 // X, Y, Z acceleration for travel (non printing) moves /** * Default Jerk limits (mm/s) @@ -877,7 +880,7 @@ * https://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html */ #if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.013 // (mm) Distance from real junction edge + #define JUNCTION_DEVIATION_MM 0.08 // (mm) Distance from real junction edge #define JD_HANDLE_SMALL_SEGMENTS // Use curvature estimation instead of just the junction angle // for small segments (< 1mm) with large junction angles (> 135°). #endif @@ -1185,19 +1188,19 @@ // @section extruder #define DISABLE_E false // Disable the extruder when not stepping -#define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled +//#define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled // @section machine // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR false +#define INVERT_X_DIR true #define INVERT_Y_DIR true -#define INVERT_Z_DIR false +#define INVERT_Z_DIR true // @section extruder // For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR false +#define INVERT_E0_DIR true #define INVERT_E1_DIR false #define INVERT_E2_DIR false #define INVERT_E3_DIR false @@ -1225,15 +1228,15 @@ // Direction of endstops when homing; 1=MAX, -1=MIN // :[-1,1] -#define X_HOME_DIR -1 -#define Y_HOME_DIR -1 +#define X_HOME_DIR 1 +#define Y_HOME_DIR 1 #define Z_HOME_DIR -1 // @section machine // The size of the printable area -#define X_BED_SIZE 200 -#define Y_BED_SIZE 200 +#define X_BED_SIZE 220 +#define Y_BED_SIZE 220 // Travel limits (mm) after homing, corresponding to endstop positions. #define X_MIN_POS 0 @@ -1241,7 +1244,7 @@ #define Z_MIN_POS 0 #define X_MAX_POS X_BED_SIZE #define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 200 +#define Z_MAX_POS 300 /** * Software Endstops @@ -1595,7 +1598,7 @@ #endif // Homing speeds (mm/min) -#define HOMING_FEEDRATE_MM_M { (50*60), (50*60), (4*60) } +#define HOMING_FEEDRATE_MM_M { (20*60), (20*60), (4*60) } // Validate that endstops are triggered on homing moves #define VALIDATE_HOMING_ENDSTOPS @@ -1672,7 +1675,7 @@ * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) */ -//#define EEPROM_SETTINGS // Persistent storage with M500 and M501 +#define EEPROM_SETTINGS // Persistent storage with M500 and M501 //#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. #define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load @@ -1706,16 +1709,16 @@ // Preheat Constants - Up to 5 are supported without changes // #define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 180 -#define PREHEAT_1_TEMP_BED 70 +#define PREHEAT_1_TEMP_HOTEND 185 +#define PREHEAT_1_TEMP_BED 45 #define PREHEAT_1_TEMP_CHAMBER 35 -#define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 +#define PREHEAT_1_FAN_SPEED 255 // Value from 0 to 255 #define PREHEAT_2_LABEL "ABS" #define PREHEAT_2_TEMP_HOTEND 240 -#define PREHEAT_2_TEMP_BED 110 +#define PREHEAT_2_TEMP_BED 70 #define PREHEAT_2_TEMP_CHAMBER 35 -#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 +#define PREHEAT_2_FAN_SPEED 255 // Value from 0 to 255 /** * Nozzle Park @@ -1921,7 +1924,7 @@ * * :['JAPANESE', 'WESTERN', 'CYRILLIC'] */ -#define DISPLAY_CHARSET_HD44780 JAPANESE +#define DISPLAY_CHARSET_HD44780 WESTERN /** * Info Screen Style (0:Classic, 1:Průša) @@ -1936,7 +1939,7 @@ * SD Card support is disabled by default. If your controller has an SD slot, * you must uncomment the following option or it won't work. */ -//#define SDSUPPORT +#define SDSUPPORT /** * SD CARD: ENABLE CRC @@ -2014,7 +2017,7 @@ // If you have a speaker that can produce tones, enable it here. // By default Marlin assumes you have a buzzer with a fixed frequency. // -//#define SPEAKER +#define SPEAKER // // The duration and frequency for the UI feedback sound. @@ -2287,7 +2290,7 @@ // This is RAMPS-compatible using a single 10-pin connector. // (For CR-10 owners who want to replace the Melzi Creality board but retain the display) // -//#define CR10_STOCKDISPLAY +#define CR10_STOCKDISPLAY // // Ender-2 OEM display, a variant of the MKS_MINI_12864 diff --git a/config/examples/Creality/Ender-5/CrealityV1/Configuration_adv.h b/config/examples/Creality/Ender-5/CrealityV1/Configuration_adv.h index 5335fa012a..14bcd9fae7 100644 --- a/config/examples/Creality/Ender-5/CrealityV1/Configuration_adv.h +++ b/config/examples/Creality/Ender-5/CrealityV1/Configuration_adv.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Creality/Ender-5/CrealityV1" + /** * Configuration_adv.h * @@ -741,7 +743,7 @@ //#define HOMING_BACKOFF_POST_MM { 2, 2, 2 } // (mm) Backoff from endstops after homing -//#define QUICK_HOME // If G28 contains XY do a diagonal move first +#define QUICK_HOME // If G28 contains XY do a diagonal move first //#define HOME_Y_BEFORE_X // If G28 contains XY home Y before X //#define HOME_Z_FIRST // Home Z first. Requires a Z-MIN endstop (not a probe). //#define CODEPENDENT_XY_HOMING // If X/Y can't home without homing Y/X first @@ -792,7 +794,7 @@ * differs, a mode set eeprom write will be completed at initialization. * Use the option below to force an eeprom write to a V3.1 probe regardless. */ - //#define BLTOUCH_SET_5V_MODE + #define BLTOUCH_SET_5V_MODE /** * Safety: Activate if connecting a probe with an unknown voltage mode. @@ -867,7 +869,7 @@ // On a 300mm bed a 5% grade would give a misalignment of ~1.5cm #define G34_MAX_GRADE 5 // (%) Maximum incline that G34 will handle - #define Z_STEPPER_ALIGN_ITERATIONS 5 // Number of iterations to apply during alignment + #define Z_STEPPER_ALIGN_ITERATIONS 3 // Number of iterations to apply during alignment #define Z_STEPPER_ALIGN_ACC 0.02 // Stop iterating early if the accuracy is better than this #define RESTORE_LEVELING_AFTER_G34 // Restore leveling after G34 is done? // After G34, re-home Z (G28 Z) or just calculate it from the last probe heights? @@ -928,7 +930,7 @@ #define DEFAULT_STEPPER_DEACTIVE_TIME 120 #define DISABLE_INACTIVE_X true #define DISABLE_INACTIVE_Y true -#define DISABLE_INACTIVE_Z true // Set 'false' if the nozzle could fall onto your printed part! +#define DISABLE_INACTIVE_Z false // Set 'false' if the nozzle could fall onto your printed part! #define DISABLE_INACTIVE_E true // Default Minimum Feedrates for printing and travel moves @@ -1175,7 +1177,7 @@ #endif // Include a page of printer information in the LCD Main Menu - //#define LCD_INFO_MENU + #define LCD_INFO_MENU #if ENABLED(LCD_INFO_MENU) //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages #endif @@ -1229,7 +1231,7 @@ #endif // Scroll a longer status message into view - //#define STATUS_MESSAGE_SCROLLING + #define STATUS_MESSAGE_SCROLLING // On the Info Screen, display XY with one decimal place when possible //#define LCD_DECIMAL_SMALL_XY @@ -1384,7 +1386,7 @@ //#define LONG_FILENAME_HOST_SUPPORT // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES + #define SCROLL_LONG_FILENAMES // Leave the heaters on after Stop Print (not recommended!) //#define SD_ABORT_NO_COOLDOWN @@ -1790,7 +1792,7 @@ * * Warning: Does not respect endstops! */ -//#define BABYSTEPPING +#define BABYSTEPPING #if ENABLED(BABYSTEPPING) //#define INTEGRATED_BABYSTEPPING // EXPERIMENTAL integration of babystepping into the Stepper ISR //#define BABYSTEP_WITHOUT_HOMING @@ -1801,7 +1803,7 @@ #define BABYSTEP_MULTIPLICATOR_Z 1 // (steps or mm) Steps or millimeter distance for each Z babystep #define BABYSTEP_MULTIPLICATOR_XY 1 // (steps or mm) Steps or millimeter distance for each XY babystep - //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. + #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. // Note: Extra time may be added to mitigate controller latency. @@ -2493,7 +2495,7 @@ #define INTERPOLATE true #if AXIS_IS_TMC(X) - #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. + #define X_CURRENT 580 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for sensorless homing #define X_MICROSTEPS 16 // 0..256 #define X_RSENSE 0.11 @@ -2511,7 +2513,7 @@ #endif #if AXIS_IS_TMC(Y) - #define Y_CURRENT 800 + #define Y_CURRENT 650 #define Y_CURRENT_HOME Y_CURRENT #define Y_MICROSTEPS 16 #define Y_RSENSE 0.11 @@ -2529,7 +2531,7 @@ #endif #if AXIS_IS_TMC(Z) - #define Z_CURRENT 800 + #define Z_CURRENT 580 #define Z_CURRENT_HOME Z_CURRENT #define Z_MICROSTEPS 16 #define Z_RSENSE 0.11 @@ -2565,7 +2567,7 @@ #endif #if AXIS_IS_TMC(E0) - #define E0_CURRENT 800 + #define E0_CURRENT 650 #define E0_MICROSTEPS 16 #define E0_RSENSE 0.11 #define E0_CHAIN_POS -1 @@ -2719,7 +2721,7 @@ * Define your own with: * { , , hysteresis_start[1..8] } */ - #define CHOPPER_TIMING CHOPPER_DEFAULT_12V // All axes (override below) + #define CHOPPER_TIMING CHOPPER_DEFAULT_24V // All axes (override below) //#define CHOPPER_TIMING_X CHOPPER_TIMING // For X Axes (override below) //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X //#define CHOPPER_TIMING_Y CHOPPER_TIMING // For Y Axes (override below) diff --git a/config/examples/Creality/Ender-5/CrealityV427/Configuration.h b/config/examples/Creality/Ender-5/CrealityV427/Configuration.h index 78c2dc9160..0706f56343 100644 --- a/config/examples/Creality/Ender-5/CrealityV427/Configuration.h +++ b/config/examples/Creality/Ender-5/CrealityV427/Configuration.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Creality/Ender-5/CrealityV427" + /** * Configuration.h * @@ -69,7 +71,7 @@ // @section info // Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes. +#define STRING_CONFIG_H_AUTHOR "(Dust, Ender-5)" // Who made the changes. //#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) /** @@ -87,10 +89,10 @@ #define SHOW_BOOTSCREEN // Show the bitmap in Marlin/_Bootscreen.h on startup. -//#define SHOW_CUSTOM_BOOTSCREEN +#define SHOW_CUSTOM_BOOTSCREEN // Show the bitmap in Marlin/_Statusscreen.h on the status screen. -//#define CUSTOM_STATUS_SCREEN_IMAGE +#define CUSTOM_STATUS_SCREEN_IMAGE // @section machine @@ -102,7 +104,7 @@ * * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] */ -#define SERIAL_PORT 0 +#define SERIAL_PORT 1 /** * Select a secondary serial port on the board to use for communication with the host. @@ -127,18 +129,18 @@ * * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ -#define BAUDRATE 250000 +#define BAUDRATE 115200 // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH // Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_RAMPS_14_EFB + #define MOTHERBOARD BOARD_CREALITY_V427 #endif // Name displayed in the LCD "Ready" message and Info menu -//#define CUSTOM_MACHINE_NAME "3D Printer" +#define CUSTOM_MACHINE_NAME "Ender-5 4.2.7" // Printer's unique ID, used by some programs to differentiate between machines. // Choose your own or use a service like https://www.uuidgenerator.net/version4 @@ -424,7 +426,7 @@ #define TEMP_SENSOR_5 0 #define TEMP_SENSOR_6 0 #define TEMP_SENSOR_7 0 -#define TEMP_SENSOR_BED 0 +#define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 #define TEMP_SENSOR_COOLER 0 @@ -480,7 +482,7 @@ #define HEATER_5_MAXTEMP 275 #define HEATER_6_MAXTEMP 275 #define HEATER_7_MAXTEMP 275 -#define BED_MAXTEMP 150 +#define BED_MAXTEMP 125 #define CHAMBER_MAXTEMP 60 /** @@ -505,21 +507,22 @@ #define PID_K1 0.95 // Smoothing factor within any PID loop #if ENABLED(PIDTEMP) - //#define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) - //#define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) + #define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) + #define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) // Set/get with gcode: M301 E[extruder number, 0-2] + // Creality Ender-5 #if ENABLED(PID_PARAMS_PER_HOTEND) // Specify between 1 and HOTENDS values per array. // If fewer than EXTRUDER values are provided, the last element will be repeated. - #define DEFAULT_Kp_LIST { 22.20, 22.20 } - #define DEFAULT_Ki_LIST { 1.08, 1.08 } - #define DEFAULT_Kd_LIST { 114.00, 114.00 } + #define DEFAULT_Kp_LIST { 21.73, 21.73 } + #define DEFAULT_Ki_LIST { 1.54, 1.54 } + #define DEFAULT_Kd_LIST { 76.55, 76.55 } #else - #define DEFAULT_Kp 22.20 - #define DEFAULT_Ki 1.08 - #define DEFAULT_Kd 114.00 + #define DEFAULT_Kp 21.73 + #define DEFAULT_Ki 1.54 + #define DEFAULT_Kd 76.55 #endif #endif // PIDTEMP @@ -683,11 +686,11 @@ // Specify here all the endstop connectors that are connected to any endstop or probe. // Almost all printers will be using one per axis. Probes will use one or more of the // extra connectors. Leave undefined any used for non-endstop and non-probe purposes. -#define USE_XMIN_PLUG -#define USE_YMIN_PLUG +//#define USE_XMIN_PLUG +//#define USE_YMIN_PLUG #define USE_ZMIN_PLUG -//#define USE_XMAX_PLUG -//#define USE_YMAX_PLUG +#define USE_XMAX_PLUG +#define USE_YMAX_PLUG //#define USE_ZMAX_PLUG // Enable pullup for all endstops to prevent a floating state @@ -743,15 +746,15 @@ * TMC5130, TMC5130_STANDALONE, TMC5160, TMC5160_STANDALONE * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'L6474', 'POWERSTEP01', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2160', 'TMC2160_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC2209', 'TMC2209_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE', 'TMC5160', 'TMC5160_STANDALONE'] */ -#define X_DRIVER_TYPE A4988 -#define Y_DRIVER_TYPE A4988 -#define Z_DRIVER_TYPE A4988 +#define X_DRIVER_TYPE TMC2208_STANDALONE +#define Y_DRIVER_TYPE TMC2208_STANDALONE +#define Z_DRIVER_TYPE TMC2208_STANDALONE //#define X2_DRIVER_TYPE A4988 //#define Y2_DRIVER_TYPE A4988 //#define Z2_DRIVER_TYPE A4988 //#define Z3_DRIVER_TYPE A4988 //#define Z4_DRIVER_TYPE A4988 -#define E0_DRIVER_TYPE A4988 +#define E0_DRIVER_TYPE TMC2208_STANDALONE //#define E1_DRIVER_TYPE A4988 //#define E2_DRIVER_TYPE A4988 //#define E3_DRIVER_TYPE A4988 @@ -806,14 +809,14 @@ * Override with M92 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 500 } +#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 93 } /** * Default Max Feed Rate (mm/s) * Override with M203 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 } +#define DEFAULT_MAX_FEEDRATE { 500, 500, 5, 25 } //#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 #if ENABLED(LIMITED_MAX_FR_EDITING) @@ -826,7 +829,7 @@ * Override with M201 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 } +#define DEFAULT_MAX_ACCELERATION { 500, 500, 100, 5000 } //#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 #if ENABLED(LIMITED_MAX_ACCEL_EDITING) @@ -841,9 +844,9 @@ * M204 R Retract Acceleration * M204 T Travel Acceleration */ -#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves +#define DEFAULT_ACCELERATION 500 // X, Y, Z and E acceleration for printing moves +#define DEFAULT_RETRACT_ACCELERATION 500 // E acceleration for retracts +#define DEFAULT_TRAVEL_ACCELERATION 500 // X, Y, Z acceleration for travel (non printing) moves /** * Default Jerk limits (mm/s) @@ -877,7 +880,7 @@ * https://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html */ #if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.013 // (mm) Distance from real junction edge + #define JUNCTION_DEVIATION_MM 0.08 // (mm) Distance from real junction edge #define JD_HANDLE_SMALL_SEGMENTS // Use curvature estimation instead of just the junction angle // for small segments (< 1mm) with large junction angles (> 135°). #endif @@ -1185,13 +1188,13 @@ // @section extruder #define DISABLE_E false // Disable the extruder when not stepping -#define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled +//#define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled // @section machine // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR false -#define INVERT_Y_DIR true +#define INVERT_Y_DIR false #define INVERT_Z_DIR false // @section extruder @@ -1225,15 +1228,15 @@ // Direction of endstops when homing; 1=MAX, -1=MIN // :[-1,1] -#define X_HOME_DIR -1 -#define Y_HOME_DIR -1 +#define X_HOME_DIR 1 +#define Y_HOME_DIR 1 #define Z_HOME_DIR -1 // @section machine // The size of the printable area -#define X_BED_SIZE 200 -#define Y_BED_SIZE 200 +#define X_BED_SIZE 220 +#define Y_BED_SIZE 220 // Travel limits (mm) after homing, corresponding to endstop positions. #define X_MIN_POS 0 @@ -1241,7 +1244,7 @@ #define Z_MIN_POS 0 #define X_MAX_POS X_BED_SIZE #define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 200 +#define Z_MAX_POS 300 /** * Software Endstops @@ -1595,7 +1598,7 @@ #endif // Homing speeds (mm/min) -#define HOMING_FEEDRATE_MM_M { (50*60), (50*60), (4*60) } +#define HOMING_FEEDRATE_MM_M { (20*60), (20*60), (4*60) } // Validate that endstops are triggered on homing moves #define VALIDATE_HOMING_ENDSTOPS @@ -1672,7 +1675,7 @@ * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) */ -//#define EEPROM_SETTINGS // Persistent storage with M500 and M501 +#define EEPROM_SETTINGS // Persistent storage with M500 and M501 //#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. #define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load @@ -1706,16 +1709,16 @@ // Preheat Constants - Up to 5 are supported without changes // #define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 180 -#define PREHEAT_1_TEMP_BED 70 +#define PREHEAT_1_TEMP_HOTEND 185 +#define PREHEAT_1_TEMP_BED 45 #define PREHEAT_1_TEMP_CHAMBER 35 -#define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 +#define PREHEAT_1_FAN_SPEED 255 // Value from 0 to 255 #define PREHEAT_2_LABEL "ABS" #define PREHEAT_2_TEMP_HOTEND 240 -#define PREHEAT_2_TEMP_BED 110 +#define PREHEAT_2_TEMP_BED 70 #define PREHEAT_2_TEMP_CHAMBER 35 -#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 +#define PREHEAT_2_FAN_SPEED 255 // Value from 0 to 255 /** * Nozzle Park @@ -1921,7 +1924,7 @@ * * :['JAPANESE', 'WESTERN', 'CYRILLIC'] */ -#define DISPLAY_CHARSET_HD44780 JAPANESE +#define DISPLAY_CHARSET_HD44780 WESTERN /** * Info Screen Style (0:Classic, 1:Průša) @@ -1936,7 +1939,7 @@ * SD Card support is disabled by default. If your controller has an SD slot, * you must uncomment the following option or it won't work. */ -//#define SDSUPPORT +#define SDSUPPORT /** * SD CARD: ENABLE CRC @@ -2014,7 +2017,7 @@ // If you have a speaker that can produce tones, enable it here. // By default Marlin assumes you have a buzzer with a fixed frequency. // -//#define SPEAKER +#define SPEAKER // // The duration and frequency for the UI feedback sound. @@ -2287,7 +2290,10 @@ // This is RAMPS-compatible using a single 10-pin connector. // (For CR-10 owners who want to replace the Melzi Creality board but retain the display) // -//#define CR10_STOCKDISPLAY +#define CR10_STOCKDISPLAY +#if ENABLED(CR10_STOCKDISPLAY) + #define RET6_12864_LCD // Specific to the SoC (can either be RET / VET) +#endif // // Ender-2 OEM display, a variant of the MKS_MINI_12864 diff --git a/config/examples/Creality/Ender-5/CrealityV427/Configuration_adv.h b/config/examples/Creality/Ender-5/CrealityV427/Configuration_adv.h index 5335fa012a..51744a5bfc 100644 --- a/config/examples/Creality/Ender-5/CrealityV427/Configuration_adv.h +++ b/config/examples/Creality/Ender-5/CrealityV427/Configuration_adv.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Creality/Ender-5/CrealityV427" + /** * Configuration_adv.h * @@ -741,7 +743,7 @@ //#define HOMING_BACKOFF_POST_MM { 2, 2, 2 } // (mm) Backoff from endstops after homing -//#define QUICK_HOME // If G28 contains XY do a diagonal move first +#define QUICK_HOME // If G28 contains XY do a diagonal move first //#define HOME_Y_BEFORE_X // If G28 contains XY home Y before X //#define HOME_Z_FIRST // Home Z first. Requires a Z-MIN endstop (not a probe). //#define CODEPENDENT_XY_HOMING // If X/Y can't home without homing Y/X first @@ -792,7 +794,7 @@ * differs, a mode set eeprom write will be completed at initialization. * Use the option below to force an eeprom write to a V3.1 probe regardless. */ - //#define BLTOUCH_SET_5V_MODE + #define BLTOUCH_SET_5V_MODE /** * Safety: Activate if connecting a probe with an unknown voltage mode. @@ -867,7 +869,7 @@ // On a 300mm bed a 5% grade would give a misalignment of ~1.5cm #define G34_MAX_GRADE 5 // (%) Maximum incline that G34 will handle - #define Z_STEPPER_ALIGN_ITERATIONS 5 // Number of iterations to apply during alignment + #define Z_STEPPER_ALIGN_ITERATIONS 3 // Number of iterations to apply during alignment #define Z_STEPPER_ALIGN_ACC 0.02 // Stop iterating early if the accuracy is better than this #define RESTORE_LEVELING_AFTER_G34 // Restore leveling after G34 is done? // After G34, re-home Z (G28 Z) or just calculate it from the last probe heights? @@ -928,7 +930,7 @@ #define DEFAULT_STEPPER_DEACTIVE_TIME 120 #define DISABLE_INACTIVE_X true #define DISABLE_INACTIVE_Y true -#define DISABLE_INACTIVE_Z true // Set 'false' if the nozzle could fall onto your printed part! +#define DISABLE_INACTIVE_Z false // Set 'false' if the nozzle could fall onto your printed part! #define DISABLE_INACTIVE_E true // Default Minimum Feedrates for printing and travel moves @@ -1175,7 +1177,7 @@ #endif // Include a page of printer information in the LCD Main Menu - //#define LCD_INFO_MENU + #define LCD_INFO_MENU #if ENABLED(LCD_INFO_MENU) //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages #endif @@ -1229,7 +1231,7 @@ #endif // Scroll a longer status message into view - //#define STATUS_MESSAGE_SCROLLING + #define STATUS_MESSAGE_SCROLLING // On the Info Screen, display XY with one decimal place when possible //#define LCD_DECIMAL_SMALL_XY @@ -1384,7 +1386,7 @@ //#define LONG_FILENAME_HOST_SUPPORT // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES + #define SCROLL_LONG_FILENAMES // Leave the heaters on after Stop Print (not recommended!) //#define SD_ABORT_NO_COOLDOWN @@ -1790,7 +1792,7 @@ * * Warning: Does not respect endstops! */ -//#define BABYSTEPPING +#define BABYSTEPPING #if ENABLED(BABYSTEPPING) //#define INTEGRATED_BABYSTEPPING // EXPERIMENTAL integration of babystepping into the Stepper ISR //#define BABYSTEP_WITHOUT_HOMING @@ -1801,7 +1803,7 @@ #define BABYSTEP_MULTIPLICATOR_Z 1 // (steps or mm) Steps or millimeter distance for each Z babystep #define BABYSTEP_MULTIPLICATOR_XY 1 // (steps or mm) Steps or millimeter distance for each XY babystep - //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. + #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. // Note: Extra time may be added to mitigate controller latency. @@ -2493,7 +2495,7 @@ #define INTERPOLATE true #if AXIS_IS_TMC(X) - #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. + #define X_CURRENT 580 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for sensorless homing #define X_MICROSTEPS 16 // 0..256 #define X_RSENSE 0.11 @@ -2511,7 +2513,7 @@ #endif #if AXIS_IS_TMC(Y) - #define Y_CURRENT 800 + #define Y_CURRENT 650 #define Y_CURRENT_HOME Y_CURRENT #define Y_MICROSTEPS 16 #define Y_RSENSE 0.11 @@ -2529,7 +2531,7 @@ #endif #if AXIS_IS_TMC(Z) - #define Z_CURRENT 800 + #define Z_CURRENT 580 #define Z_CURRENT_HOME Z_CURRENT #define Z_MICROSTEPS 16 #define Z_RSENSE 0.11 @@ -2565,7 +2567,7 @@ #endif #if AXIS_IS_TMC(E0) - #define E0_CURRENT 800 + #define E0_CURRENT 650 #define E0_MICROSTEPS 16 #define E0_RSENSE 0.11 #define E0_CHAIN_POS -1 @@ -2719,7 +2721,7 @@ * Define your own with: * { , , hysteresis_start[1..8] } */ - #define CHOPPER_TIMING CHOPPER_DEFAULT_12V // All axes (override below) + #define CHOPPER_TIMING CHOPPER_DEFAULT_24V // All axes (override below) //#define CHOPPER_TIMING_X CHOPPER_TIMING // For X Axes (override below) //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X //#define CHOPPER_TIMING_Y CHOPPER_TIMING // For Y Axes (override below) diff --git a/config/examples/Creality/Ender-6/Configuration.h b/config/examples/Creality/Ender-6/Configuration.h index 78c2dc9160..6cdcfaf82a 100644 --- a/config/examples/Creality/Ender-6/Configuration.h +++ b/config/examples/Creality/Ender-6/Configuration.h @@ -21,6 +21,11 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Creality/Ender-6" + +// Enable this option for BLTouch support +//#define ENABLE_BLTOUCH_PROBE + /** * Configuration.h * @@ -69,7 +74,7 @@ // @section info // Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes. +#define STRING_CONFIG_H_AUTHOR "(smcgroty, for Ender 6)" // Who made the changes. //#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) /** @@ -102,7 +107,7 @@ * * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] */ -#define SERIAL_PORT 0 +#define SERIAL_PORT 1 /** * Select a secondary serial port on the board to use for communication with the host. @@ -127,14 +132,14 @@ * * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ -#define BAUDRATE 250000 +#define BAUDRATE 115200 // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH // Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_RAMPS_14_EFB + #define MOTHERBOARD BOARD_CREALITY_V431 #endif // Name displayed in the LCD "Ready" message and Info menu @@ -424,7 +429,7 @@ #define TEMP_SENSOR_5 0 #define TEMP_SENSOR_6 0 #define TEMP_SENSOR_7 0 -#define TEMP_SENSOR_BED 0 +#define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 #define TEMP_SENSOR_COOLER 0 @@ -472,7 +477,7 @@ // Above this temperature the heater will be switched off. // This can protect components from overheating, but NOT from shorts and failures. // (Use MINTEMP for thermistor short/failure protection.) -#define HEATER_0_MAXTEMP 275 +#define HEATER_0_MAXTEMP 260 #define HEATER_1_MAXTEMP 275 #define HEATER_2_MAXTEMP 275 #define HEATER_3_MAXTEMP 275 @@ -480,7 +485,7 @@ #define HEATER_5_MAXTEMP 275 #define HEATER_6_MAXTEMP 275 #define HEATER_7_MAXTEMP 275 -#define BED_MAXTEMP 150 +#define BED_MAXTEMP 100 #define CHAMBER_MAXTEMP 60 /** @@ -517,9 +522,9 @@ #define DEFAULT_Ki_LIST { 1.08, 1.08 } #define DEFAULT_Kd_LIST { 114.00, 114.00 } #else - #define DEFAULT_Kp 22.20 - #define DEFAULT_Ki 1.08 - #define DEFAULT_Kd 114.00 + #define DEFAULT_Kp 30.86 + #define DEFAULT_Ki 3.10 + #define DEFAULT_Kd 75.84 #endif #endif // PIDTEMP @@ -540,7 +545,7 @@ * heater. If your configuration is significantly different than this and you don't understand * the issues involved, don't use bed PID until someone else verifies that your hardware works. */ -//#define PIDTEMPBED +#define PIDTEMPBED //#define BED_LIMIT_SWITCHING @@ -558,9 +563,9 @@ // 120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) // from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) - #define DEFAULT_bedKp 10.00 - #define DEFAULT_bedKi .023 - #define DEFAULT_bedKd 305.4 + #define DEFAULT_bedKp 327.11 + #define DEFAULT_bedKi 19.20 + #define DEFAULT_bedKd 1393.45 // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. #endif // PIDTEMPBED @@ -634,7 +639,7 @@ * Note: For Bowden Extruders make this large enough to allow load/unload. */ #define PREVENT_LENGTHY_EXTRUDE -#define EXTRUDE_MAXLENGTH 200 +#define EXTRUDE_MAXLENGTH 1000 //=========================================================================== //======================== Thermal Runaway Protection ======================= @@ -666,7 +671,7 @@ // Enable one of the options below for CoreXY, CoreXZ, or CoreYZ kinematics, // either in the usual order or reversed -//#define COREXY +#define COREXY //#define COREXZ //#define COREYZ //#define COREYX @@ -683,11 +688,11 @@ // Specify here all the endstop connectors that are connected to any endstop or probe. // Almost all printers will be using one per axis. Probes will use one or more of the // extra connectors. Leave undefined any used for non-endstop and non-probe purposes. -#define USE_XMIN_PLUG -#define USE_YMIN_PLUG +//#define USE_XMIN_PLUG +//#define USE_YMIN_PLUG #define USE_ZMIN_PLUG -//#define USE_XMAX_PLUG -//#define USE_YMAX_PLUG +#define USE_XMAX_PLUG +#define USE_YMAX_PLUG //#define USE_ZMAX_PLUG // Enable pullup for all endstops to prevent a floating state @@ -743,15 +748,15 @@ * TMC5130, TMC5130_STANDALONE, TMC5160, TMC5160_STANDALONE * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'L6474', 'POWERSTEP01', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2160', 'TMC2160_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC2209', 'TMC2209_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE', 'TMC5160', 'TMC5160_STANDALONE'] */ -#define X_DRIVER_TYPE A4988 -#define Y_DRIVER_TYPE A4988 -#define Z_DRIVER_TYPE A4988 +#define X_DRIVER_TYPE TMC2208_STANDALONE +#define Y_DRIVER_TYPE TMC2208_STANDALONE +#define Z_DRIVER_TYPE TMC2208_STANDALONE //#define X2_DRIVER_TYPE A4988 //#define Y2_DRIVER_TYPE A4988 //#define Z2_DRIVER_TYPE A4988 //#define Z3_DRIVER_TYPE A4988 //#define Z4_DRIVER_TYPE A4988 -#define E0_DRIVER_TYPE A4988 +#define E0_DRIVER_TYPE TMC2208_STANDALONE //#define E1_DRIVER_TYPE A4988 //#define E2_DRIVER_TYPE A4988 //#define E3_DRIVER_TYPE A4988 @@ -806,14 +811,14 @@ * Override with M92 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 500 } +#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 140 } /** * Default Max Feed Rate (mm/s) * Override with M203 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 } +#define DEFAULT_MAX_FEEDRATE { 500, 500, 10, 100 } //#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 #if ENABLED(LIMITED_MAX_FR_EDITING) @@ -826,7 +831,7 @@ * Override with M201 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 } +#define DEFAULT_MAX_ACCELERATION { 5000, 5000, 100, 10000 } //#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 #if ENABLED(LIMITED_MAX_ACCEL_EDITING) @@ -841,7 +846,7 @@ * M204 R Retract Acceleration * M204 T Travel Acceleration */ -#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves +#define DEFAULT_ACCELERATION 2000 // X, Y, Z and E acceleration for printing moves #define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts #define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves @@ -853,11 +858,11 @@ * When changing speed and direction, if the difference is less than the * value set here, it may happen instantaneously. */ -//#define CLASSIC_JERK +#define CLASSIC_JERK #if ENABLED(CLASSIC_JERK) #define DEFAULT_XJERK 10.0 #define DEFAULT_YJERK 10.0 - #define DEFAULT_ZJERK 0.3 + #define DEFAULT_ZJERK 0.4 //#define TRAVEL_EXTRA_XYJERK 0.0 // Additional jerk allowance for all travel moves @@ -877,7 +882,7 @@ * https://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html */ #if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.013 // (mm) Distance from real junction edge + #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge #define JD_HANDLE_SMALL_SEGMENTS // Use curvature estimation instead of just the junction angle // for small segments (< 1mm) with large junction angles (> 135°). #endif @@ -906,10 +911,10 @@ * The probe replaces the Z-MIN endstop and is used for Z homing. * (Automatically enables USE_PROBE_FOR_Z_HOMING.) */ -#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN +//#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN // Force the use of the probe for Z-axis homing -//#define USE_PROBE_FOR_Z_HOMING +#define USE_PROBE_FOR_Z_HOMING /** * Z_MIN_PROBE_PIN @@ -940,7 +945,9 @@ * Use G29 repeatedly, adjusting the Z height at each point with movement commands * or (with LCD_BED_LEVELING) the LCD controller. */ -//#define PROBE_MANUALLY +#ifndef ENABLE_BLTOUCH_PROBE + #define PROBE_MANUALLY +#endif /** * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. @@ -963,7 +970,9 @@ /** * The BLTouch probe uses a Hall effect sensor and emulates a servo. */ -//#define BLTOUCH +#ifdef ENABLE_BLTOUCH_PROBE + #define BLTOUCH +#endif /** * Touch-MI Probe by hotends.fr @@ -1055,7 +1064,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +#define NOZZLE_TO_PROBE_OFFSET { -20.7, -7, -2.5 } // Most probes should stay away from the edges of the bed, but // with NOZZLE_AS_PROBE this can be negative for a wider probing area. @@ -1106,7 +1115,7 @@ * A total of 2 does fast/slow probes with a weighted average. * A total of 3 or more adds more slow probes, taking the average. */ -//#define MULTIPLE_PROBING 2 +#define MULTIPLE_PROBING 2 //#define EXTRA_PROBING 1 /** @@ -1131,8 +1140,8 @@ #define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping // For M851 give a range for adjusting the Z probe offset -#define Z_PROBE_OFFSET_RANGE_MIN -20 -#define Z_PROBE_OFFSET_RANGE_MAX 20 +#define Z_PROBE_OFFSET_RANGE_MIN -5 +#define Z_PROBE_OFFSET_RANGE_MAX 5 // Enable the M48 repeatability test to test probe accuracy //#define Z_MIN_PROBE_REPEATABILITY_TEST @@ -1197,7 +1206,7 @@ // @section extruder // For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR false +#define INVERT_E0_DIR true #define INVERT_E1_DIR false #define INVERT_E2_DIR false #define INVERT_E3_DIR false @@ -1221,19 +1230,21 @@ //#define Z_HOMING_HEIGHT 4 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ... // Be sure to have this much clearance over your Z_MAX_POS to prevent grinding. -//#define Z_AFTER_HOMING 10 // (mm) Height to move to after homing Z +#ifdef ENABLE_BLTOUCH_PROBE + #define Z_AFTER_HOMING 10 // (mm) Height to move to after homing Z +#endif // Direction of endstops when homing; 1=MAX, -1=MIN // :[-1,1] -#define X_HOME_DIR -1 -#define Y_HOME_DIR -1 +#define X_HOME_DIR 1 +#define Y_HOME_DIR 1 #define Z_HOME_DIR -1 // @section machine // The size of the printable area -#define X_BED_SIZE 200 -#define Y_BED_SIZE 200 +#define X_BED_SIZE 260 +#define Y_BED_SIZE 260 // Travel limits (mm) after homing, corresponding to endstop positions. #define X_MIN_POS 0 @@ -1241,7 +1252,7 @@ #define Z_MIN_POS 0 #define X_MAX_POS X_BED_SIZE #define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 200 +#define Z_MAX_POS 400 /** * Software Endstops @@ -1285,7 +1296,7 @@ * RAMPS-based boards use SERVO3_PIN for the first runout sensor. * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. */ -//#define FILAMENT_RUNOUT_SENSOR +#define FILAMENT_RUNOUT_SENSOR #if ENABLED(FILAMENT_RUNOUT_SENSOR) #define FIL_RUNOUT_ENABLED_DEFAULT true // Enable the sensor on startup. Override with M412 followed by M500. #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. @@ -1387,7 +1398,7 @@ */ //#define AUTO_BED_LEVELING_3POINT //#define AUTO_BED_LEVELING_LINEAR -//#define AUTO_BED_LEVELING_BILINEAR +#define AUTO_BED_LEVELING_BILINEAR //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING @@ -1396,7 +1407,7 @@ * these options to restore the prior leveling state or to always enable * leveling immediately after G28. */ -//#define RESTORE_LEVELING_AFTER_G28 +#define RESTORE_LEVELING_AFTER_G28 //#define ENABLE_LEVELING_AFTER_G28 /** @@ -1454,7 +1465,7 @@ #if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR) // Set the number of grid points per dimension. - #define GRID_MAX_POINTS_X 3 + #define GRID_MAX_POINTS_X 5 #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X // Probe along the Y axis, advancing X after each column @@ -1587,7 +1598,9 @@ // - Move the Z probe (or nozzle) to a defined XY point before Z Homing. // - Prevent Z homing when the Z probe is outside bed area. // -//#define Z_SAFE_HOMING +#ifdef ENABLE_BLTOUCH_PROBE + #define Z_SAFE_HOMING +#endif #if ENABLED(Z_SAFE_HOMING) #define Z_SAFE_HOMING_X_POINT X_CENTER // X point for Z homing @@ -1672,12 +1685,12 @@ * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) */ -//#define EEPROM_SETTINGS // Persistent storage with M500 and M501 +#define EEPROM_SETTINGS // Persistent storage with M500 and M501 //#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. #define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load #if ENABLED(EEPROM_SETTINGS) - //#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. + #define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. #endif // @@ -1706,14 +1719,14 @@ // Preheat Constants - Up to 5 are supported without changes // #define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 180 -#define PREHEAT_1_TEMP_BED 70 +#define PREHEAT_1_TEMP_HOTEND 195 +#define PREHEAT_1_TEMP_BED 45 #define PREHEAT_1_TEMP_CHAMBER 35 #define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 #define PREHEAT_2_LABEL "ABS" #define PREHEAT_2_TEMP_HOTEND 240 -#define PREHEAT_2_TEMP_BED 110 +#define PREHEAT_2_TEMP_BED 100 #define PREHEAT_2_TEMP_CHAMBER 35 #define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 @@ -1728,11 +1741,11 @@ * P1 Raise the nozzle always to Z-park height. * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. */ -//#define NOZZLE_PARK_FEATURE +#define NOZZLE_PARK_FEATURE #if ENABLED(NOZZLE_PARK_FEATURE) // Specify a park position as { X, Y, Z_raise } - #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 } + #define NOZZLE_PARK_POINT { (X_MAX_POS - 10), (Y_MAX_POS - 10), 20 } //#define NOZZLE_PARK_X_ONLY // X move only is required to park //#define NOZZLE_PARK_Y_ONLY // Y move only is required to park #define NOZZLE_PARK_Z_RAISE_MIN 2 // (mm) Always raise Z by at least this distance @@ -1936,7 +1949,7 @@ * SD Card support is disabled by default. If your controller has an SD slot, * you must uncomment the following option or it won't work. */ -//#define SDSUPPORT +#define SDSUPPORT /** * SD CARD: ENABLE CRC @@ -2384,7 +2397,7 @@ // ORIGIN : https://www.aliexpress.com/item/32993409517.html // FYSETC : https://www.aliexpress.com/item/32961471929.html // -//#define DGUS_LCD_UI_ORIGIN +#define DGUS_LCD_UI_ORIGIN //#define DGUS_LCD_UI_FYSETC //#define DGUS_LCD_UI_HIPRECY diff --git a/config/examples/Creality/Ender-6/Configuration_adv.h b/config/examples/Creality/Ender-6/Configuration_adv.h index 5335fa012a..d926ac0cc3 100644 --- a/config/examples/Creality/Ender-6/Configuration_adv.h +++ b/config/examples/Creality/Ender-6/Configuration_adv.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Creality/Ender-6" + /** * Configuration_adv.h * @@ -1160,17 +1162,17 @@ // Add Probe Z Offset calibration to the Z Probe Offsets menu #if HAS_BED_PROBE - //#define PROBE_OFFSET_WIZARD + #define PROBE_OFFSET_WIZARD #if ENABLED(PROBE_OFFSET_WIZARD) // // Enable to init the Probe Z-Offset when starting the Wizard. // Use a height slightly above the estimated nozzle-to-probe Z offset. // For example, with an offset of -5, consider a starting height of -4. // - //#define PROBE_OFFSET_WIZARD_START_Z -4.0 + #define PROBE_OFFSET_WIZARD_START_Z -4.0 // Set a convenient position to do the calibration (probing point and nozzle/bed-distance) - //#define PROBE_OFFSET_WIZARD_XY_POS { X_CENTER, Y_CENTER } + #define PROBE_OFFSET_WIZARD_XY_POS { X_CENTER, Y_CENTER } #endif #endif @@ -1315,7 +1317,7 @@ * an option on the LCD screen to continue the print from the last-known * point in the file. */ - //#define POWER_LOSS_RECOVERY + #define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) //#define BACKUP_POWER_SUPPLY // Backup power / UPS to move the steppers on power loss @@ -1361,7 +1363,7 @@ * - SDSORT_CACHE_NAMES will retain the sorted file listing in RAM. (Expensive!) * - SDSORT_DYNAMIC_RAM only uses RAM when the SD menu is visible. (Use with caution!) */ - //#define SDCARD_SORT_ALPHA + #define SDCARD_SORT_ALPHA // SD Card Sorting options #if ENABLED(SDCARD_SORT_ALPHA) @@ -1790,7 +1792,7 @@ * * Warning: Does not respect endstops! */ -//#define BABYSTEPPING +#define BABYSTEPPING #if ENABLED(BABYSTEPPING) //#define INTEGRATED_BABYSTEPPING // EXPERIMENTAL integration of babystepping into the Stepper ISR //#define BABYSTEP_WITHOUT_HOMING @@ -1798,7 +1800,7 @@ //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way //#define BABYSTEP_MILLIMETER_UNITS // Specify BABYSTEP_MULTIPLICATOR_(XY|Z) in mm instead of micro-steps - #define BABYSTEP_MULTIPLICATOR_Z 1 // (steps or mm) Steps or millimeter distance for each Z babystep + #define BABYSTEP_MULTIPLICATOR_Z 40 // (steps or mm) Steps or millimeter distance for each Z babystep #define BABYSTEP_MULTIPLICATOR_XY 1 // (steps or mm) Steps or millimeter distance for each XY babystep //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. @@ -2141,7 +2143,7 @@ * Currently handles M108, M112, M410, M876 * NOTE: Not yet implemented for all platforms. */ -//#define EMERGENCY_PARSER +#define EMERGENCY_PARSER /** * Realtime Reporting (requires EMERGENCY_PARSER) @@ -2170,7 +2172,7 @@ //#define NO_TIMEOUTS 1000 // Milliseconds // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. -//#define ADVANCED_OK +#define ADVANCED_OK // Printrun may have trouble receiving long strings all at once. // This option inserts short delays between lines of serial output. @@ -2311,23 +2313,23 @@ * * Enable PARK_HEAD_ON_PAUSE to add the G-code M125 Pause and Park. */ -//#define ADVANCED_PAUSE_FEATURE +#define ADVANCED_PAUSE_FEATURE #if ENABLED(ADVANCED_PAUSE_FEATURE) - #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. - #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. + #define PAUSE_PARK_RETRACT_FEEDRATE 45 // (mm/s) Initial retract feedrate. + #define PAUSE_PARK_RETRACT_LENGTH 10 // (mm) Initial retract. // This short retract is done immediately, before parking the nozzle. - #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast. + #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 20 // (mm/s) Unload filament feedrate. This can be pretty fast. #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload. + #define FILAMENT_CHANGE_UNLOAD_LENGTH 830 // (mm) The length of filament for a complete unload. // For Bowden, the full length of the tube and nozzle. // For direct drive, the full length of the nozzle. // Set to 0 for manual unloading. #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE 6 // (mm/s) Slow move when starting load. - #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 0 // (mm) Slow length, to allow time to insert material. + #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 20 // (mm) Slow length, to allow time to insert material. // 0 to disable start loading and skip to fast load only - #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast. + #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 15 // (mm/s) Load filament feedrate. This can be pretty fast. #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle. + #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 830 // (mm) Load length of filament, from extruder gear to nozzle. // For Bowden, the full length of the tube and nozzle. // For direct drive, the full length of the nozzle. //#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted. @@ -2337,7 +2339,7 @@ // Filament can be extruded repeatedly from the Filament Change menu // until extrusion is consistent, and to purge old filament. #define ADVANCED_PAUSE_RESUME_PRIME 0 // (mm) Extra distance to prime nozzle after returning from park. - //#define ADVANCED_PAUSE_FANS_PAUSE // Turn off print-cooling fans while the machine is paused. + #define ADVANCED_PAUSE_FANS_PAUSE // Turn off print-cooling fans while the machine is paused. // Filament Unload does a Retract, Delay, and Purge first: #define FILAMENT_UNLOAD_PURGE_RETRACT 13 // (mm) Unload initial retract length. @@ -2349,10 +2351,10 @@ #define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed. #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change. - //#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. + #define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. //#define HOME_BEFORE_FILAMENT_CHANGE // If needed, home before parking for filament change - //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. + #define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) #endif @@ -2719,7 +2721,7 @@ * Define your own with: * { , , hysteresis_start[1..8] } */ - #define CHOPPER_TIMING CHOPPER_DEFAULT_12V // All axes (override below) + #define CHOPPER_TIMING CHOPPER_DEFAULT_24V // All axes (override below) //#define CHOPPER_TIMING_X CHOPPER_TIMING // For X Axes (override below) //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X //#define CHOPPER_TIMING_Y CHOPPER_TIMING // For Y Axes (override below) diff --git a/config/examples/Dagoma/Disco Ultimate/Configuration.h b/config/examples/Dagoma/Disco Ultimate/Configuration.h index 78c2dc9160..ec7fd15f4a 100644 --- a/config/examples/Dagoma/Disco Ultimate/Configuration.h +++ b/config/examples/Dagoma/Disco Ultimate/Configuration.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Dagoma/Disco Ultimate" + /** * Configuration.h * @@ -69,7 +71,7 @@ // @section info // Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes. +#define STRING_CONFIG_H_AUTHOR "Dagoma" // Who made the changes. //#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) /** @@ -87,7 +89,7 @@ #define SHOW_BOOTSCREEN // Show the bitmap in Marlin/_Bootscreen.h on startup. -//#define SHOW_CUSTOM_BOOTSCREEN +#define SHOW_CUSTOM_BOOTSCREEN // Show the bitmap in Marlin/_Statusscreen.h on the status screen. //#define CUSTOM_STATUS_SCREEN_IMAGE @@ -134,11 +136,11 @@ // Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_RAMPS_14_EFB + #define MOTHERBOARD BOARD_DAGOMA_F5 #endif // Name displayed in the LCD "Ready" message and Info menu -//#define CUSTOM_MACHINE_NAME "3D Printer" +#define CUSTOM_MACHINE_NAME "DiscoUltimate" // Printer's unique ID, used by some programs to differentiate between machines. // Choose your own or use a service like https://www.uuidgenerator.net/version4 @@ -148,13 +150,13 @@ // This defines the number of extruders // :[0, 1, 2, 3, 4, 5, 6, 7, 8] -#define EXTRUDERS 1 +#define EXTRUDERS 2 // Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc. #define DEFAULT_NOMINAL_FILAMENT_DIA 1.75 // For Cyclops or any "multi-extruder" that shares a single nozzle. -//#define SINGLENOZZLE +#define SINGLENOZZLE // Save and restore temperature and fan speed on tool-change. // Set standby for the unselected tool with M104/106/109 T... @@ -416,7 +418,7 @@ * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. */ -#define TEMP_SENSOR_0 1 +#define TEMP_SENSOR_0 18 #define TEMP_SENSOR_1 0 #define TEMP_SENSOR_2 0 #define TEMP_SENSOR_3 0 @@ -444,12 +446,12 @@ //#define TEMP_SENSOR_1_AS_REDUNDANT #define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10 -#define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 -#define TEMP_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target +#define TEMP_RESIDENCY_TIME 15 // (seconds) Time to wait for hotend to "settle" in M109 +#define TEMP_WINDOW 3 // (°C) Temperature proximity for the "temperature reached" timer +#define TEMP_HYSTERESIS 4 // (°C) Temperature proximity considered "close enough" to the target #define TEMP_BED_RESIDENCY_TIME 10 // (seconds) Time to wait for bed to "settle" in M190 -#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer +#define TEMP_BED_WINDOW 3 // (°C) Temperature proximity for the "temperature reached" timer #define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target #define TEMP_CHAMBER_RESIDENCY_TIME 10 // (seconds) Time to wait for chamber to "settle" in M191 @@ -506,20 +508,20 @@ #if ENABLED(PIDTEMP) //#define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) - //#define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) + #define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) // Set/get with gcode: M301 E[extruder number, 0-2] #if ENABLED(PID_PARAMS_PER_HOTEND) // Specify between 1 and HOTENDS values per array. // If fewer than EXTRUDER values are provided, the last element will be repeated. - #define DEFAULT_Kp_LIST { 22.20, 22.20 } - #define DEFAULT_Ki_LIST { 1.08, 1.08 } - #define DEFAULT_Kd_LIST { 114.00, 114.00 } + #define DEFAULT_Kp_LIST { 32.48, 32.48 } + #define DEFAULT_Ki_LIST { 6.40, 6.40 } + #define DEFAULT_Kd_LIST { 41.25, 41.25 } #else - #define DEFAULT_Kp 22.20 - #define DEFAULT_Ki 1.08 - #define DEFAULT_Kd 114.00 + #define DEFAULT_Kp 32.48 + #define DEFAULT_Ki 6.40 + #define DEFAULT_Kd 41.25 #endif #endif // PIDTEMP @@ -634,7 +636,7 @@ * Note: For Bowden Extruders make this large enough to allow load/unload. */ #define PREVENT_LENGTHY_EXTRUDE -#define EXTRUDE_MAXLENGTH 200 +#define EXTRUDE_MAXLENGTH 950 //=========================================================================== //======================== Thermal Runaway Protection ======================= @@ -684,10 +686,10 @@ // Almost all printers will be using one per axis. Probes will use one or more of the // extra connectors. Leave undefined any used for non-endstop and non-probe purposes. #define USE_XMIN_PLUG -#define USE_YMIN_PLUG +//#define USE_YMIN_PLUG #define USE_ZMIN_PLUG //#define USE_XMAX_PLUG -//#define USE_YMAX_PLUG +#define USE_YMAX_PLUG //#define USE_ZMAX_PLUG // Enable pullup for all endstops to prevent a floating state @@ -719,11 +721,11 @@ // Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). #define X_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. #define Y_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. +#define Z_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. #define X_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. #define Y_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. #define Z_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_PROBE_ENDSTOP_INVERTING false // Set to true to invert the logic of the probe. +#define Z_MIN_PROBE_ENDSTOP_INVERTING true // Set to true to invert the logic of the probe. /** * Stepper Drivers @@ -743,15 +745,15 @@ * TMC5130, TMC5130_STANDALONE, TMC5160, TMC5160_STANDALONE * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'L6474', 'POWERSTEP01', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2160', 'TMC2160_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC2209', 'TMC2209_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE', 'TMC5160', 'TMC5160_STANDALONE'] */ -#define X_DRIVER_TYPE A4988 -#define Y_DRIVER_TYPE A4988 -#define Z_DRIVER_TYPE A4988 +#define X_DRIVER_TYPE A5984 +#define Y_DRIVER_TYPE A5984 +#define Z_DRIVER_TYPE A5984 //#define X2_DRIVER_TYPE A4988 //#define Y2_DRIVER_TYPE A4988 //#define Z2_DRIVER_TYPE A4988 //#define Z3_DRIVER_TYPE A4988 //#define Z4_DRIVER_TYPE A4988 -#define E0_DRIVER_TYPE A4988 +#define E0_DRIVER_TYPE A5984 //#define E1_DRIVER_TYPE A4988 //#define E2_DRIVER_TYPE A4988 //#define E3_DRIVER_TYPE A4988 @@ -806,14 +808,14 @@ * Override with M92 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 500 } +#define DEFAULT_AXIS_STEPS_PER_UNIT { 160, 160, 1600, 196 } /** * Default Max Feed Rate (mm/s) * Override with M203 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 } +#define DEFAULT_MAX_FEEDRATE { 500, 500, 4, 170 } //#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 #if ENABLED(LIMITED_MAX_FR_EDITING) @@ -826,7 +828,7 @@ * Override with M201 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 } +#define DEFAULT_MAX_ACCELERATION { 3000, 1000, 20, 10000 } //#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 #if ENABLED(LIMITED_MAX_ACCEL_EDITING) @@ -890,7 +892,7 @@ * * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained */ -//#define S_CURVE_ACCELERATION +#define S_CURVE_ACCELERATION //=========================================================================== //============================= Z Probe Options ============================= @@ -946,7 +948,7 @@ * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. * (e.g., an inductive probe or a nozzle-based probe-switch.) */ -//#define FIX_MOUNTED_PROBE +#define FIX_MOUNTED_PROBE /** * Use the nozzle as the probe, as with a conductive @@ -1055,7 +1057,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +#define NOZZLE_TO_PROBE_OFFSET { 0, 21, -1.5 } // Most probes should stay away from the edges of the bed, but // with NOZZLE_AS_PROBE this can be negative for a wider probing area. @@ -1106,7 +1108,7 @@ * A total of 2 does fast/slow probes with a weighted average. * A total of 3 or more adds more slow probes, taking the average. */ -//#define MULTIPLE_PROBING 2 +#define MULTIPLE_PROBING 2 //#define EXTRA_PROBING 1 /** @@ -1135,7 +1137,7 @@ #define Z_PROBE_OFFSET_RANGE_MAX 20 // Enable the M48 repeatability test to test probe accuracy -//#define Z_MIN_PROBE_REPEATABILITY_TEST +#define Z_MIN_PROBE_REPEATABILITY_TEST // Before deploy/stow pause for user confirmation //#define PAUSE_BEFORE_DEPLOY_STOW @@ -1191,14 +1193,14 @@ // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR false -#define INVERT_Y_DIR true +#define INVERT_Y_DIR false #define INVERT_Z_DIR false // @section extruder // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR false -#define INVERT_E1_DIR false +#define INVERT_E1_DIR true #define INVERT_E2_DIR false #define INVERT_E3_DIR false #define INVERT_E4_DIR false @@ -1226,14 +1228,14 @@ // Direction of endstops when homing; 1=MAX, -1=MIN // :[-1,1] #define X_HOME_DIR -1 -#define Y_HOME_DIR -1 +#define Y_HOME_DIR 1 #define Z_HOME_DIR -1 // @section machine // The size of the printable area -#define X_BED_SIZE 200 -#define Y_BED_SIZE 200 +#define X_BED_SIZE 205 +#define Y_BED_SIZE 205 // Travel limits (mm) after homing, corresponding to endstop positions. #define X_MIN_POS 0 @@ -1285,12 +1287,12 @@ * RAMPS-based boards use SERVO3_PIN for the first runout sensor. * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. */ -//#define FILAMENT_RUNOUT_SENSOR +#define FILAMENT_RUNOUT_SENSOR #if ENABLED(FILAMENT_RUNOUT_SENSOR) #define FIL_RUNOUT_ENABLED_DEFAULT true // Enable the sensor on startup. Override with M412 followed by M500. - #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. + #define NUM_RUNOUT_SENSORS 2 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. - #define FIL_RUNOUT_STATE LOW // Pin state indicating that filament is NOT present. + #define FIL_RUNOUT_STATE HIGH // Pin state indicating that filament is NOT present. #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. //#define WATCH_ALL_RUNOUT_SENSORS // Execute runout script on any triggering sensor, not only for the active extruder. @@ -1388,7 +1390,7 @@ //#define AUTO_BED_LEVELING_3POINT //#define AUTO_BED_LEVELING_LINEAR //#define AUTO_BED_LEVELING_BILINEAR -//#define AUTO_BED_LEVELING_UBL +#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING /** @@ -1396,7 +1398,7 @@ * these options to restore the prior leveling state or to always enable * leveling immediately after G28. */ -//#define RESTORE_LEVELING_AFTER_G28 +#define RESTORE_LEVELING_AFTER_G28 //#define ENABLE_LEVELING_AFTER_G28 /** @@ -1438,15 +1440,15 @@ /** * Enable the G26 Mesh Validation Pattern tool. */ - //#define G26_MESH_VALIDATION + #define G26_MESH_VALIDATION #if ENABLED(G26_MESH_VALIDATION) #define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle. - #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for G26. - #define MESH_TEST_HOTEND_TEMP 205 // (°C) Default nozzle temperature for G26. + #define MESH_TEST_LAYER_HEIGHT 0.26 // (mm) Default layer height for G26. + #define MESH_TEST_HOTEND_TEMP 190 // (°C) Default nozzle temperature for G26. #define MESH_TEST_BED_TEMP 60 // (°C) Default bed temperature for G26. #define G26_XY_FEEDRATE 20 // (mm/s) Feedrate for G26 XY moves. #define G26_XY_FEEDRATE_TRAVEL 100 // (mm/s) Feedrate for G26 XY travel moves. - #define G26_RETRACT_MULTIPLIER 1.0 // G26 Q (retraction) used by default between mesh test elements. + #define G26_RETRACT_MULTIPLIER 5 // G26 Q (retraction) used by default between mesh test elements. #endif #endif @@ -1484,15 +1486,15 @@ //========================= Unified Bed Leveling ============================ //=========================================================================== - //#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh + #define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh - #define MESH_INSET 1 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. + #define MESH_INSET 0 // Set Mesh bounds as an inset region of the bed + #define GRID_MAX_POINTS_X 5 // Don't use more than 15 points per axis, implementation limited. #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X //#define UBL_HILBERT_CURVE // Use Hilbert distribution for less travel when probing multiple points - #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle + //#define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used @@ -1518,12 +1520,12 @@ * Add a bed leveling sub-menu for ABL or MBL. * Include a guided procedure if manual probing is enabled. */ -//#define LCD_BED_LEVELING +#define LCD_BED_LEVELING #if ENABLED(LCD_BED_LEVELING) #define MESH_EDIT_Z_STEP 0.025 // (mm) Step size while manually probing Z axis. #define LCD_PROBE_Z_RANGE 4 // (mm) Z Range centered on Z_MIN_POS for LCD Z adjustment - //#define MESH_EDIT_MENU // Add a menu to edit mesh points + #define MESH_EDIT_MENU // Add a menu to edit mesh points #endif // Add a menu item to move between bed corners for manual bed adjustment @@ -1587,7 +1589,7 @@ // - Move the Z probe (or nozzle) to a defined XY point before Z Homing. // - Prevent Z homing when the Z probe is outside bed area. // -//#define Z_SAFE_HOMING +#define Z_SAFE_HOMING #if ENABLED(Z_SAFE_HOMING) #define Z_SAFE_HOMING_X_POINT X_CENTER // X point for Z homing @@ -1672,12 +1674,12 @@ * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) */ -//#define EEPROM_SETTINGS // Persistent storage with M500 and M501 +#define EEPROM_SETTINGS // Persistent storage with M500 and M501 //#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. #define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load #if ENABLED(EEPROM_SETTINGS) - //#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. + #define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. #endif // @@ -1706,10 +1708,10 @@ // Preheat Constants - Up to 5 are supported without changes // #define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 180 +#define PREHEAT_1_TEMP_HOTEND 190 #define PREHEAT_1_TEMP_BED 70 #define PREHEAT_1_TEMP_CHAMBER 35 -#define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 +#define PREHEAT_1_FAN_SPEED 200 // Value from 0 to 255 #define PREHEAT_2_LABEL "ABS" #define PREHEAT_2_TEMP_HOTEND 240 @@ -1728,7 +1730,7 @@ * P1 Raise the nozzle always to Z-park height. * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. */ -//#define NOZZLE_PARK_FEATURE +#define NOZZLE_PARK_FEATURE #if ENABLED(NOZZLE_PARK_FEATURE) // Specify a park position as { X, Y, Z_raise } @@ -1936,7 +1938,7 @@ * SD Card support is disabled by default. If your controller has an SD slot, * you must uncomment the following option or it won't work. */ -//#define SDSUPPORT +#define SDSUPPORT /** * SD CARD: ENABLE CRC @@ -2006,7 +2008,7 @@ // // Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. // -//#define INDIVIDUAL_AXIS_HOMING_MENU +#define INDIVIDUAL_AXIS_HOMING_MENU // // SPEAKER/BUZZER @@ -2195,7 +2197,7 @@ // RepRapDiscount FULL GRAPHIC Smart Controller // https://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller // -//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER +#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER // // K.3D Full Graphic Smart Controller @@ -2618,7 +2620,7 @@ // Use software PWM to drive the fan, as for the heaters. This uses a very low frequency // which is not as annoying as with the hardware PWM. On the other hand, if this frequency // is too low, you should also increment SOFT_PWM_SCALE. -//#define FAN_SOFT_PWM +#define FAN_SOFT_PWM // Incrementing this by 1 will double the software PWM frequency, // affecting heaters, and the fan if FAN_SOFT_PWM is enabled. diff --git a/config/examples/Dagoma/Disco Ultimate/Configuration_adv.h b/config/examples/Dagoma/Disco Ultimate/Configuration_adv.h index 5335fa012a..2aa262165d 100644 --- a/config/examples/Dagoma/Disco Ultimate/Configuration_adv.h +++ b/config/examples/Dagoma/Disco Ultimate/Configuration_adv.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Dagoma/Disco Ultimate" + /** * Configuration_adv.h * @@ -241,9 +243,9 @@ #define THERMAL_PROTECTION_PERIOD 40 // Seconds #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius - //#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops + #define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops #if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP) - //#define NO_FAN_SLOWING_IN_PID_TUNING // Don't slow fan speed during M303 + #define NO_FAN_SLOWING_IN_PID_TUNING // Don't slow fan speed during M303 #endif /** @@ -479,7 +481,7 @@ // When first starting the main fan, run it at full speed for the // given number of milliseconds. This gets the fan spinning reliably // before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) -//#define FAN_KICKSTART_TIME 100 +#define FAN_KICKSTART_TIME 100 // Some coolers may require a non-zero "off" state. //#define FAN_OFF_PWM 1 @@ -540,7 +542,7 @@ * Multiple extruders can be assigned to the same pin in which case * the fan will turn on when any selected extruder is above the threshold. */ -#define E0_AUTO_FAN_PIN -1 +#define E0_AUTO_FAN_PIN 7 #define E1_AUTO_FAN_PIN -1 #define E2_AUTO_FAN_PIN -1 #define E3_AUTO_FAN_PIN -1 @@ -739,7 +741,7 @@ #define HOMING_BUMP_MM { 5, 5, 2 } // (mm) Backoff from endstops after first bump #define HOMING_BUMP_DIVISOR { 2, 2, 4 } // Re-Bump Speed Divisor (Divides the Homing Feedrate) -//#define HOMING_BACKOFF_POST_MM { 2, 2, 2 } // (mm) Backoff from endstops after homing +#define HOMING_BACKOFF_POST_MM { 2, 2, 2 } // (mm) Backoff from endstops after homing //#define QUICK_HOME // If G28 contains XY do a diagonal move first //#define HOME_Y_BEFORE_X // If G28 contains XY home Y before X @@ -1097,7 +1099,7 @@ */ //#define PWM_MOTOR_CURRENT { 1300, 1300, 1250 } // Values in milliamps //#define DIGIPOT_MOTOR_CURRENT { 135,135,135,135,135 } // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A) -//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis +#define DAC_MOTOR_CURRENT_DEFAULT { 30, 30, 25, 30 } // Default drive percent - X, Y, Z, E axis /** * I2C-based DIGIPOTs (e.g., Azteeg X3 Pro) @@ -1145,8 +1147,8 @@ // Change values more rapidly when the encoder is rotated faster #define ENCODER_RATE_MULTIPLIER #if ENABLED(ENCODER_RATE_MULTIPLIER) - #define ENCODER_10X_STEPS_PER_SEC 30 // (steps/s) Encoder rate for 10x speed - #define ENCODER_100X_STEPS_PER_SEC 80 // (steps/s) Encoder rate for 100x speed + #define ENCODER_10X_STEPS_PER_SEC 75 // (steps/s) Encoder rate for 10x speed + #define ENCODER_100X_STEPS_PER_SEC 160 // (steps/s) Encoder rate for 100x speed #endif // Play a beep when the feedrate is changed from the Status Screen @@ -1175,7 +1177,7 @@ #endif // Include a page of printer information in the LCD Main Menu - //#define LCD_INFO_MENU + #define LCD_INFO_MENU #if ENABLED(LCD_INFO_MENU) //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages #endif @@ -1219,7 +1221,7 @@ #if HAS_DISPLAY // The timeout (in ms) to return to the status screen from sub-menus - //#define LCD_TIMEOUT_TO_STATUS 15000 + #define LCD_TIMEOUT_TO_STATUS 15000 #if ENABLED(SHOW_BOOTSCREEN) #define BOOTSCREEN_TIMEOUT 4000 // (ms) Total Duration to display the boot screen(s) @@ -1229,13 +1231,13 @@ #endif // Scroll a longer status message into view - //#define STATUS_MESSAGE_SCROLLING + #define STATUS_MESSAGE_SCROLLING // On the Info Screen, display XY with one decimal place when possible //#define LCD_DECIMAL_SMALL_XY // Add an 'M73' G-code to set the current percentage - //#define LCD_SET_PROGRESS_MANUALLY + #define LCD_SET_PROGRESS_MANUALLY // Show the E position (filament used) during printing //#define LCD_SHOW_E_TOTAL @@ -1381,10 +1383,10 @@ //#define UTF_FILENAME_SUPPORT // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT + #define LONG_FILENAME_HOST_SUPPORT // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES + #define SCROLL_LONG_FILENAMES // Leave the heaters on after Stop Print (not recommended!) //#define SD_ABORT_NO_COOLDOWN @@ -1406,7 +1408,7 @@ /** * Auto-report SdCard status with M27 S */ - //#define AUTO_REPORT_SD_STATUS + #define AUTO_REPORT_SD_STATUS /** * Support for USB thumb drives using an Arduino USB Host Shield or @@ -1649,7 +1651,7 @@ // Specify additional languages for the UI. Default specified by LCD_LANGUAGE. // #if ANY(DOGLCD, TFT_COLOR_UI, TOUCH_UI_FTDI_EVE) - //#define LCD_LANGUAGE_2 fr + #define LCD_LANGUAGE_2 fr //#define LCD_LANGUAGE_3 de //#define LCD_LANGUAGE_4 es //#define LCD_LANGUAGE_5 it @@ -1790,18 +1792,18 @@ * * Warning: Does not respect endstops! */ -//#define BABYSTEPPING +#define BABYSTEPPING #if ENABLED(BABYSTEPPING) //#define INTEGRATED_BABYSTEPPING // EXPERIMENTAL integration of babystepping into the Stepper ISR //#define BABYSTEP_WITHOUT_HOMING - //#define BABYSTEP_ALWAYS_AVAILABLE // Allow babystepping at all times (not just during movement). - //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! + #define BABYSTEP_ALWAYS_AVAILABLE // Allow babystepping at all times (not just during movement). + #define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way //#define BABYSTEP_MILLIMETER_UNITS // Specify BABYSTEP_MULTIPLICATOR_(XY|Z) in mm instead of micro-steps #define BABYSTEP_MULTIPLICATOR_Z 1 // (steps or mm) Steps or millimeter distance for each Z babystep #define BABYSTEP_MULTIPLICATOR_XY 1 // (steps or mm) Steps or millimeter distance for each XY babystep - //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. + #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. // Note: Extra time may be added to mitigate controller latency. @@ -1813,10 +1815,10 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 - //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping + #define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping #if ENABLED(BABYSTEP_ZPROBE_OFFSET) //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - //#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor + #define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif @@ -2141,7 +2143,7 @@ * Currently handles M108, M112, M410, M876 * NOTE: Not yet implemented for all platforms. */ -//#define EMERGENCY_PARSER +#define EMERGENCY_PARSER /** * Realtime Reporting (requires EMERGENCY_PARSER) @@ -2167,10 +2169,10 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +#define NO_TIMEOUTS 1000 // Milliseconds // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. -//#define ADVANCED_OK +#define ADVANCED_OK // Printrun may have trouble receiving long strings all at once. // This option inserts short delays between lines of serial output. @@ -2311,33 +2313,33 @@ * * Enable PARK_HEAD_ON_PAUSE to add the G-code M125 Pause and Park. */ -//#define ADVANCED_PAUSE_FEATURE +#define ADVANCED_PAUSE_FEATURE #if ENABLED(ADVANCED_PAUSE_FEATURE) #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. // This short retract is done immediately, before parking the nozzle. - #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast. + #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 100 // (mm/s) Unload filament feedrate. This can be pretty fast. #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload. + #define FILAMENT_CHANGE_UNLOAD_LENGTH 950 // (mm) The length of filament for a complete unload. // For Bowden, the full length of the tube and nozzle. // For direct drive, the full length of the nozzle. // Set to 0 for manual unloading. #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE 6 // (mm/s) Slow move when starting load. - #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 0 // (mm) Slow length, to allow time to insert material. + #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 10 // (mm) Slow length, to allow time to insert material. // 0 to disable start loading and skip to fast load only - #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast. + #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 100 // (mm/s) Load filament feedrate. This can be pretty fast. #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle. + #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 940 // (mm) Load length of filament, from extruder gear to nozzle. // For Bowden, the full length of the tube and nozzle. // For direct drive, the full length of the nozzle. //#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted. #define ADVANCED_PAUSE_PURGE_FEEDRATE 3 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate. - #define ADVANCED_PAUSE_PURGE_LENGTH 50 // (mm) Length to extrude after loading. + #define ADVANCED_PAUSE_PURGE_LENGTH 30 // (mm) Length to extrude after loading. // Set to 0 for manual extrusion. // Filament can be extruded repeatedly from the Filament Change menu // until extrusion is consistent, and to purge old filament. #define ADVANCED_PAUSE_RESUME_PRIME 0 // (mm) Extra distance to prime nozzle after returning from park. - //#define ADVANCED_PAUSE_FANS_PAUSE // Turn off print-cooling fans while the machine is paused. + #define ADVANCED_PAUSE_FANS_PAUSE // Turn off print-cooling fans while the machine is paused. // Filament Unload does a Retract, Delay, and Purge first: #define FILAMENT_UNLOAD_PURGE_RETRACT 13 // (mm) Unload initial retract length. @@ -2349,10 +2351,10 @@ #define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed. #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change. - //#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. - //#define HOME_BEFORE_FILAMENT_CHANGE // If needed, home before parking for filament change + #define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. + #define HOME_BEFORE_FILAMENT_CHANGE // If needed, home before parking for filament change - //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. + #define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) #endif @@ -3650,9 +3652,9 @@ * Host Prompt Support enables Marlin to use the host for user prompts so * filament runout and other processes can be managed from the host side. */ -//#define HOST_ACTION_COMMANDS +#define HOST_ACTION_COMMANDS #if ENABLED(HOST_ACTION_COMMANDS) - //#define HOST_PROMPT_SUPPORT + #define HOST_PROMPT_SUPPORT //#define HOST_START_MENU_ITEM // Add a menu item that tells the host to start #endif diff --git a/config/examples/Daycom/3DP-100/Configuration.h b/config/examples/Daycom/3DP-100/Configuration.h index 78c2dc9160..20224d88a8 100644 --- a/config/examples/Daycom/3DP-100/Configuration.h +++ b/config/examples/Daycom/3DP-100/Configuration.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Daycom/3DP-100" + /** * Configuration.h * @@ -134,11 +136,13 @@ // Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_RAMPS_14_EFB + #define MOTHERBOARD BOARD_MEGACONTROLLER #endif +#define FAN_PIN -1 + // Name displayed in the LCD "Ready" message and Info menu -//#define CUSTOM_MACHINE_NAME "3D Printer" +#define CUSTOM_MACHINE_NAME "3DP-100" // Printer's unique ID, used by some programs to differentiate between machines. // Choose your own or use a service like https://www.uuidgenerator.net/version4 @@ -510,16 +514,17 @@ //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) // Set/get with gcode: M301 E[extruder number, 0-2] + // Daycom 3DP-100 MK8 #if ENABLED(PID_PARAMS_PER_HOTEND) // Specify between 1 and HOTENDS values per array. // If fewer than EXTRUDER values are provided, the last element will be repeated. - #define DEFAULT_Kp_LIST { 22.20, 22.20 } - #define DEFAULT_Ki_LIST { 1.08, 1.08 } - #define DEFAULT_Kd_LIST { 114.00, 114.00 } + #define DEFAULT_Kp_LIST { 21.73, 21.73 } + #define DEFAULT_Ki_LIST { 1.54, 1.54 } + #define DEFAULT_Kd_LIST { 76.55, 76.55 } #else - #define DEFAULT_Kp 22.20 - #define DEFAULT_Ki 1.08 - #define DEFAULT_Kd 114.00 + #define DEFAULT_Kp 21.73 + #define DEFAULT_Ki 1.54 + #define DEFAULT_Kd 76.55 #endif #endif // PIDTEMP @@ -666,7 +671,7 @@ // Enable one of the options below for CoreXY, CoreXZ, or CoreYZ kinematics, // either in the usual order or reversed -//#define COREXY +#define COREXY //#define COREXZ //#define COREYZ //#define COREYX @@ -717,13 +722,13 @@ #endif // Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define X_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_PROBE_ENDSTOP_INVERTING false // Set to true to invert the logic of the probe. +#define X_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Y_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Z_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define X_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Y_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Z_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Z_MIN_PROBE_ENDSTOP_INVERTING true // Set to true to invert the logic of the probe. /** * Stepper Drivers @@ -806,7 +811,7 @@ * Override with M92 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 500 } +#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 800, 94.3 } /** * Default Max Feed Rate (mm/s) @@ -826,7 +831,7 @@ * Override with M201 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 } +#define DEFAULT_MAX_ACCELERATION { 9000, 9000, 100, 10000 } //#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 #if ENABLED(LIMITED_MAX_ACCEL_EDITING) @@ -890,7 +895,7 @@ * * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained */ -//#define S_CURVE_ACCELERATION +#define S_CURVE_ACCELERATION //=========================================================================== //============================= Z Probe Options ============================= @@ -1190,14 +1195,14 @@ // @section machine // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR false +#define INVERT_X_DIR true #define INVERT_Y_DIR true -#define INVERT_Z_DIR false +#define INVERT_Z_DIR true // @section extruder // For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR false +#define INVERT_E0_DIR true #define INVERT_E1_DIR false #define INVERT_E2_DIR false #define INVERT_E3_DIR false @@ -1232,8 +1237,8 @@ // @section machine // The size of the printable area -#define X_BED_SIZE 200 -#define Y_BED_SIZE 200 +#define X_BED_SIZE 149 +#define Y_BED_SIZE 149 // Travel limits (mm) after homing, corresponding to endstop positions. #define X_MIN_POS 0 @@ -1241,7 +1246,7 @@ #define Z_MIN_POS 0 #define X_MAX_POS X_BED_SIZE #define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 200 +#define Z_MAX_POS 99 /** * Software Endstops @@ -1672,7 +1677,7 @@ * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) */ -//#define EEPROM_SETTINGS // Persistent storage with M500 and M501 +#define EEPROM_SETTINGS // Persistent storage with M500 and M501 //#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. #define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load @@ -1936,7 +1941,7 @@ * SD Card support is disabled by default. If your controller has an SD slot, * you must uncomment the following option or it won't work. */ -//#define SDSUPPORT +#define SDSUPPORT /** * SD CARD: ENABLE CRC @@ -1960,7 +1965,7 @@ // This option overrides the default number of encoder pulses needed to // produce one step. Should be increased for high-resolution encoders. // -//#define ENCODER_PULSES_PER_STEP 4 +#define ENCODER_PULSES_PER_STEP 2 // // Use this option to override the number of step signals required to @@ -1983,7 +1988,7 @@ // // Set this option if CLOCKWISE causes values to DECREASE // -//#define REVERSE_ENCODER_DIRECTION +#define REVERSE_ENCODER_DIRECTION // // This option reverses the encoder direction for navigating LCD menus. @@ -2220,7 +2225,7 @@ // MakerLab Mini Panel with graphic // controller and SD support - https://reprap.org/wiki/Mini_panel // -//#define MINIPANEL +#define MINIPANEL // // MaKr3d Makr-Panel with graphic controller and SD support. @@ -2731,7 +2736,7 @@ * Set this manually if there are extra servos needing manual control. * Set to 0 to turn off servo support. */ -//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command +#define NUM_SERVOS 1 // Servo index starts with 0 for M280 command // (ms) Delay before the next move will start, to give the servo time to reach its target angle. // 300ms is a good value but you can try less delay. diff --git a/config/examples/Daycom/3DP-100/Configuration_adv.h b/config/examples/Daycom/3DP-100/Configuration_adv.h index 5335fa012a..eb19ba0f23 100644 --- a/config/examples/Daycom/3DP-100/Configuration_adv.h +++ b/config/examples/Daycom/3DP-100/Configuration_adv.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Daycom/3DP-100" + /** * Configuration_adv.h * @@ -461,7 +463,7 @@ * The fan turns on automatically whenever any driver is enabled and turns * off (or reduces to idle speed) shortly after drivers are turned off. */ -//#define USE_CONTROLLER_FAN +#define USE_CONTROLLER_FAN #if ENABLED(USE_CONTROLLER_FAN) //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan //#define CONTROLLER_FAN_USE_Z_ONLY // With this option only the Z axis is considered @@ -540,7 +542,7 @@ * Multiple extruders can be assigned to the same pin in which case * the fan will turn on when any selected extruder is above the threshold. */ -#define E0_AUTO_FAN_PIN -1 +#define E0_AUTO_FAN_PIN 39 // Fan0 #define E1_AUTO_FAN_PIN -1 #define E2_AUTO_FAN_PIN -1 #define E3_AUTO_FAN_PIN -1 @@ -3650,7 +3652,7 @@ * Host Prompt Support enables Marlin to use the host for user prompts so * filament runout and other processes can be managed from the host side. */ -//#define HOST_ACTION_COMMANDS +#define HOST_ACTION_COMMANDS #if ENABLED(HOST_ACTION_COMMANDS) //#define HOST_PROMPT_SUPPORT //#define HOST_START_MENU_ITEM // Add a menu item that tells the host to start diff --git a/config/examples/EXP3D/Imprimante multifonction/Configuration.h b/config/examples/EXP3D/Imprimante multifonction/Configuration.h index 78c2dc9160..4dd54b2183 100644 --- a/config/examples/EXP3D/Imprimante multifonction/Configuration.h +++ b/config/examples/EXP3D/Imprimante multifonction/Configuration.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "EXP3D/Imprimante multifonction" + /** * Configuration.h * @@ -69,7 +71,7 @@ // @section info // Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes. +#define STRING_CONFIG_H_AUTHOR "(Vertabreaker)" // Who made the changes. //#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) /** @@ -134,7 +136,7 @@ // Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_RAMPS_14_EFB + #define MOTHERBOARD BOARD_RAMPS_13_EEB #endif // Name displayed in the LCD "Ready" message and Info menu @@ -142,7 +144,7 @@ // Printer's unique ID, used by some programs to differentiate between machines. // Choose your own or use a service like https://www.uuidgenerator.net/version4 -//#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" +#define MACHINE_UUID "00000000-1337-1337-1337-000000000000" // @section extruder @@ -424,7 +426,7 @@ #define TEMP_SENSOR_5 0 #define TEMP_SENSOR_6 0 #define TEMP_SENSOR_7 0 -#define TEMP_SENSOR_BED 0 +#define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 #define TEMP_SENSOR_COOLER 0 @@ -444,11 +446,11 @@ //#define TEMP_SENSOR_1_AS_REDUNDANT #define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10 -#define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 +#define TEMP_RESIDENCY_TIME 5 // (seconds) Time to wait for hotend to "settle" in M109 #define TEMP_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer #define TEMP_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target -#define TEMP_BED_RESIDENCY_TIME 10 // (seconds) Time to wait for bed to "settle" in M190 +#define TEMP_BED_RESIDENCY_TIME 5 // (seconds) Time to wait for bed to "settle" in M190 #define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer #define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target @@ -458,15 +460,15 @@ // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. -#define HEATER_0_MINTEMP 5 -#define HEATER_1_MINTEMP 5 -#define HEATER_2_MINTEMP 5 -#define HEATER_3_MINTEMP 5 -#define HEATER_4_MINTEMP 5 -#define HEATER_5_MINTEMP 5 -#define HEATER_6_MINTEMP 5 -#define HEATER_7_MINTEMP 5 -#define BED_MINTEMP 5 +#define HEATER_0_MINTEMP 0 +#define HEATER_1_MINTEMP 0 +#define HEATER_2_MINTEMP 0 +#define HEATER_3_MINTEMP 0 +#define HEATER_4_MINTEMP 0 +#define HEATER_5_MINTEMP 0 +#define HEATER_6_MINTEMP 0 +#define HEATER_7_MINTEMP 0 +#define BED_MINTEMP 0 #define CHAMBER_MINTEMP 5 // Above this temperature the heater will be switched off. @@ -506,20 +508,20 @@ #if ENABLED(PIDTEMP) //#define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) - //#define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) + #define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) // Set/get with gcode: M301 E[extruder number, 0-2] #if ENABLED(PID_PARAMS_PER_HOTEND) // Specify between 1 and HOTENDS values per array. // If fewer than EXTRUDER values are provided, the last element will be repeated. - #define DEFAULT_Kp_LIST { 22.20, 22.20 } - #define DEFAULT_Ki_LIST { 1.08, 1.08 } - #define DEFAULT_Kd_LIST { 114.00, 114.00 } + #define DEFAULT_Kp_LIST { 11.21, 11.21 } + #define DEFAULT_Ki_LIST { 0.44, 0.44 } + #define DEFAULT_Kd_LIST { 71.37, 71.37 } #else - #define DEFAULT_Kp 22.20 - #define DEFAULT_Ki 1.08 - #define DEFAULT_Kd 114.00 + #define DEFAULT_Kp 11.21 + #define DEFAULT_Ki 0.44 + #define DEFAULT_Kd 71.37 #endif #endif // PIDTEMP @@ -558,9 +560,9 @@ // 120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) // from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) - #define DEFAULT_bedKp 10.00 - #define DEFAULT_bedKi .023 - #define DEFAULT_bedKd 305.4 + #define DEFAULT_bedKp 150//10.00 + #define DEFAULT_bedKi 1.41//.023 + #define DEFAULT_bedKd 1675.16//305.4 // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. #endif // PIDTEMPBED @@ -627,14 +629,14 @@ * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** */ #define PREVENT_COLD_EXTRUSION -#define EXTRUDE_MINTEMP 170 +#define EXTRUDE_MINTEMP 100 /** * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. * Note: For Bowden Extruders make this large enough to allow load/unload. */ #define PREVENT_LENGTHY_EXTRUDE -#define EXTRUDE_MAXLENGTH 200 +#define EXTRUDE_MAXLENGTH 1000 //=========================================================================== //======================== Thermal Runaway Protection ======================= @@ -686,9 +688,9 @@ #define USE_XMIN_PLUG #define USE_YMIN_PLUG #define USE_ZMIN_PLUG -//#define USE_XMAX_PLUG -//#define USE_YMAX_PLUG -//#define USE_ZMAX_PLUG +#define USE_XMAX_PLUG +#define USE_YMAX_PLUG +#define USE_ZMAX_PLUG // Enable pullup for all endstops to prevent a floating state #define ENDSTOPPULLUPS @@ -717,13 +719,13 @@ #endif // Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define X_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_PROBE_ENDSTOP_INVERTING false // Set to true to invert the logic of the probe. +#define X_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Y_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Z_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define X_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Y_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Z_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Z_MIN_PROBE_ENDSTOP_INVERTING true // Set to true to invert the logic of the probe. /** * Stepper Drivers @@ -806,7 +808,7 @@ * Override with M92 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 500 } +#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 800, 140 } /** * Default Max Feed Rate (mm/s) @@ -841,9 +843,9 @@ * M204 R Retract Acceleration * M204 T Travel Acceleration */ -#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves +#define DEFAULT_ACCELERATION 500 // X, Y, Z and E acceleration for printing moves +#define DEFAULT_RETRACT_ACCELERATION 500 // E acceleration for retracts +#define DEFAULT_TRAVEL_ACCELERATION 500 // X, Y, Z acceleration for travel (non printing) moves /** * Default Jerk limits (mm/s) @@ -855,8 +857,8 @@ */ //#define CLASSIC_JERK #if ENABLED(CLASSIC_JERK) - #define DEFAULT_XJERK 10.0 - #define DEFAULT_YJERK 10.0 + #define DEFAULT_XJERK 8.0 + #define DEFAULT_YJERK 8.0 #define DEFAULT_ZJERK 0.3 //#define TRAVEL_EXTRA_XYJERK 0.0 // Additional jerk allowance for all travel moves @@ -877,7 +879,7 @@ * https://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html */ #if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.013 // (mm) Distance from real junction edge + #define JUNCTION_DEVIATION_MM 0.01 // (mm) Distance from real junction edge #define JD_HANDLE_SMALL_SEGMENTS // Use curvature estimation instead of just the junction angle // for small segments (< 1mm) with large junction angles (> 135°). #endif @@ -890,7 +892,7 @@ * * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained */ -//#define S_CURVE_ACCELERATION +#define S_CURVE_ACCELERATION //=========================================================================== //============================= Z Probe Options ============================= @@ -946,7 +948,7 @@ * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. * (e.g., an inductive probe or a nozzle-based probe-switch.) */ -//#define FIX_MOUNTED_PROBE +#define FIX_MOUNTED_PROBE /** * Use the nozzle as the probe, as with a conductive @@ -1055,20 +1057,20 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +#define NOZZLE_TO_PROBE_OFFSET { -25, -29, -12.35 } // Most probes should stay away from the edges of the bed, but // with NOZZLE_AS_PROBE this can be negative for a wider probing area. -#define PROBING_MARGIN 10 +#define PROBING_MARGIN 0 // X and Y axis travel speed (mm/min) between probes -#define XY_PROBE_FEEDRATE (133*60) +#define XY_PROBE_FEEDRATE (40*60) // Feedrate (mm/min) for the first approach when double-probing (MULTIPLE_PROBING == 2) #define Z_PROBE_FEEDRATE_FAST (4*60) // Feedrate (mm/min) for the "accurate" probe of each point -#define Z_PROBE_FEEDRATE_SLOW (Z_PROBE_FEEDRATE_FAST / 2) +#define Z_PROBE_FEEDRATE_SLOW Z_PROBE_FEEDRATE_FAST /** * Probe Activation Switch @@ -1123,19 +1125,19 @@ * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. */ -#define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow -#define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points -#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes -//#define Z_AFTER_PROBING 5 // Z position after probing is done +#define Z_CLEARANCE_DEPLOY_PROBE 4 // Z Clearance for Deploy/Stow +#define Z_CLEARANCE_BETWEEN_PROBES 4 // Z Clearance between probe points +#define Z_CLEARANCE_MULTI_PROBE 4 // Z Clearance between multiple probes +#define Z_AFTER_PROBING 4 // Z position after probing is done #define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping // For M851 give a range for adjusting the Z probe offset #define Z_PROBE_OFFSET_RANGE_MIN -20 -#define Z_PROBE_OFFSET_RANGE_MAX 20 +#define Z_PROBE_OFFSET_RANGE_MAX 0 // Enable the M48 repeatability test to test probe accuracy -//#define Z_MIN_PROBE_REPEATABILITY_TEST +#define Z_MIN_PROBE_REPEATABILITY_TEST // Before deploy/stow pause for user confirmation //#define PAUSE_BEFORE_DEPLOY_STOW @@ -1190,21 +1192,21 @@ // @section machine // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR false -#define INVERT_Y_DIR true -#define INVERT_Z_DIR false +#define INVERT_X_DIR true +#define INVERT_Y_DIR false +#define INVERT_Z_DIR true // @section extruder // For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR false -#define INVERT_E1_DIR false -#define INVERT_E2_DIR false -#define INVERT_E3_DIR false -#define INVERT_E4_DIR false -#define INVERT_E5_DIR false -#define INVERT_E6_DIR false -#define INVERT_E7_DIR false +#define INVERT_E0_DIR true +#define INVERT_E1_DIR true +#define INVERT_E2_DIR true +#define INVERT_E3_DIR true +#define INVERT_E4_DIR true +#define INVERT_E5_DIR true +#define INVERT_E6_DIR true +#define INVERT_E7_DIR true // @section homing @@ -1216,9 +1218,9 @@ * - Use a low value (i.e., Z_MIN_POS) if the nozzle falls down to the bed. * - Use a large value (i.e., Z_MAX_POS) if the bed falls down, away from the nozzle. */ -//#define Z_IDLE_HEIGHT Z_HOME_POS +#define Z_IDLE_HEIGHT Z_MAX_POS -//#define Z_HOMING_HEIGHT 4 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ... +#define Z_HOMING_HEIGHT 4 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ... // Be sure to have this much clearance over your Z_MAX_POS to prevent grinding. //#define Z_AFTER_HOMING 10 // (mm) Height to move to after homing Z @@ -1226,14 +1228,14 @@ // Direction of endstops when homing; 1=MAX, -1=MIN // :[-1,1] #define X_HOME_DIR -1 -#define Y_HOME_DIR -1 +#define Y_HOME_DIR 1 #define Z_HOME_DIR -1 // @section machine // The size of the printable area -#define X_BED_SIZE 200 -#define Y_BED_SIZE 200 +#define X_BED_SIZE 300 +#define Y_BED_SIZE 210 // Travel limits (mm) after homing, corresponding to endstop positions. #define X_MIN_POS 0 @@ -1241,7 +1243,7 @@ #define Z_MIN_POS 0 #define X_MAX_POS X_BED_SIZE #define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 200 +#define Z_MAX_POS 185 /** * Software Endstops @@ -1269,7 +1271,7 @@ #endif #if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS) - //#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD + #define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD #endif /** @@ -1387,7 +1389,7 @@ */ //#define AUTO_BED_LEVELING_3POINT //#define AUTO_BED_LEVELING_LINEAR -//#define AUTO_BED_LEVELING_BILINEAR +#define AUTO_BED_LEVELING_BILINEAR //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING @@ -1396,7 +1398,7 @@ * these options to restore the prior leveling state or to always enable * leveling immediately after G28. */ -//#define RESTORE_LEVELING_AFTER_G28 +#define RESTORE_LEVELING_AFTER_G28 //#define ENABLE_LEVELING_AFTER_G28 /** @@ -1454,7 +1456,7 @@ #if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR) // Set the number of grid points per dimension. - #define GRID_MAX_POINTS_X 3 + #define GRID_MAX_POINTS_X 2 #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X // Probe along the Y axis, advancing X after each column @@ -1464,7 +1466,7 @@ // Beyond the probed grid, continue the implied tilt? // Default is to maintain the height of the nearest edge. - //#define EXTRAPOLATE_BEYOND_GRID + #define EXTRAPOLATE_BEYOND_GRID // // Experimental Subdivision of the grid by Catmull-Rom method. @@ -1486,7 +1488,7 @@ //#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh - #define MESH_INSET 1 // Set Mesh bounds as an inset region of the bed + #define MESH_INSET 0 // Set Mesh bounds as an inset region of the bed #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X @@ -1518,7 +1520,7 @@ * Add a bed leveling sub-menu for ABL or MBL. * Include a guided procedure if manual probing is enabled. */ -//#define LCD_BED_LEVELING +#define LCD_BED_LEVELING #if ENABLED(LCD_BED_LEVELING) #define MESH_EDIT_Z_STEP 0.025 // (mm) Step size while manually probing Z axis. @@ -1527,13 +1529,13 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS +#define LEVEL_BED_CORNERS #if ENABLED(LEVEL_BED_CORNERS) #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner + #define LEVEL_CENTER_TOO // Move to the center after the last corner //#define LEVEL_CORNERS_USE_PROBE #if ENABLED(LEVEL_CORNERS_USE_PROBE) #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 @@ -1587,7 +1589,7 @@ // - Move the Z probe (or nozzle) to a defined XY point before Z Homing. // - Prevent Z homing when the Z probe is outside bed area. // -//#define Z_SAFE_HOMING +#define Z_SAFE_HOMING #if ENABLED(Z_SAFE_HOMING) #define Z_SAFE_HOMING_X_POINT X_CENTER // X point for Z homing @@ -1595,7 +1597,7 @@ #endif // Homing speeds (mm/min) -#define HOMING_FEEDRATE_MM_M { (50*60), (50*60), (4*60) } +#define HOMING_FEEDRATE_MM_M { (40*60), (40*60), (4*60) } // Validate that endstops are triggered on homing moves #define VALIDATE_HOMING_ENDSTOPS @@ -1630,13 +1632,13 @@ * +-------------->X +-------------->X +-------------->Y * XY_SKEW_FACTOR XZ_SKEW_FACTOR YZ_SKEW_FACTOR */ -//#define SKEW_CORRECTION +#define SKEW_CORRECTION #if ENABLED(SKEW_CORRECTION) // Input all length measurements here: - #define XY_DIAG_AC 282.8427124746 - #define XY_DIAG_BD 282.8427124746 - #define XY_SIDE_AD 200 + //#define XY_DIAG_AC 282.8427124746 + //#define XY_DIAG_BD 282.8427124746 + //#define XY_SIDE_AD 200 // Or, set the default skew factors directly here // to override the above measurements: @@ -1644,13 +1646,13 @@ //#define SKEW_CORRECTION_FOR_Z #if ENABLED(SKEW_CORRECTION_FOR_Z) - #define XZ_DIAG_AC 282.8427124746 - #define XZ_DIAG_BD 282.8427124746 - #define YZ_DIAG_AC 282.8427124746 - #define YZ_DIAG_BD 282.8427124746 - #define YZ_SIDE_AD 200 - #define XZ_SKEW_FACTOR 0.0 - #define YZ_SKEW_FACTOR 0.0 + //#define XZ_DIAG_AC 282.8427124746 + //#define XZ_DIAG_BD 282.8427124746 + //#define YZ_DIAG_AC 282.8427124746 + //#define YZ_DIAG_BD 282.8427124746 + //#define YZ_SIDE_AD 200 + //#define XZ_SKEW_FACTOR 0.0 + //#define YZ_SKEW_FACTOR 0.0 #endif // Enable this option for M852 to set skew at runtime @@ -1672,12 +1674,12 @@ * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) */ -//#define EEPROM_SETTINGS // Persistent storage with M500 and M501 +#define EEPROM_SETTINGS // Persistent storage with M500 and M501 //#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. #define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load #if ENABLED(EEPROM_SETTINGS) - //#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. + #define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. #endif // @@ -1693,12 +1695,12 @@ // // G20/G21 Inch mode support // -//#define INCH_MODE_SUPPORT +#define INCH_MODE_SUPPORT // // M149 Set temperature units support // -//#define TEMPERATURE_UNITS_SUPPORT +#define TEMPERATURE_UNITS_SUPPORT // @section temperature @@ -1706,14 +1708,14 @@ // Preheat Constants - Up to 5 are supported without changes // #define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 180 -#define PREHEAT_1_TEMP_BED 70 +#define PREHEAT_1_TEMP_HOTEND 200 +#define PREHEAT_1_TEMP_BED 60 #define PREHEAT_1_TEMP_CHAMBER 35 #define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 #define PREHEAT_2_LABEL "ABS" -#define PREHEAT_2_TEMP_HOTEND 240 -#define PREHEAT_2_TEMP_BED 110 +#define PREHEAT_2_TEMP_HOTEND 250 +#define PREHEAT_2_TEMP_BED 70 #define PREHEAT_2_TEMP_CHAMBER 35 #define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 @@ -1728,11 +1730,11 @@ * P1 Raise the nozzle always to Z-park height. * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. */ -//#define NOZZLE_PARK_FEATURE +#define NOZZLE_PARK_FEATURE #if ENABLED(NOZZLE_PARK_FEATURE) // Specify a park position as { X, Y, Z_raise } - #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 } + #define NOZZLE_PARK_POINT { (X_MIN_POS + 0), (Y_MIN_POS + 0), 20 } //#define NOZZLE_PARK_X_ONLY // X move only is required to park //#define NOZZLE_PARK_Y_ONLY // Y move only is required to park #define NOZZLE_PARK_Z_RAISE_MIN 2 // (mm) Always raise Z by at least this distance @@ -1777,7 +1779,7 @@ * Caveats: The ending Z should be the same as starting Z. * Attention: EXPERIMENTAL. G-code arguments may change. */ -//#define NOZZLE_CLEAN_FEATURE +#define NOZZLE_CLEAN_FEATURE #if ENABLED(NOZZLE_CLEAN_FEATURE) // Default number of pattern repetitions @@ -1845,7 +1847,7 @@ * * View the current statistics with M78. */ -//#define PRINTCOUNTER +#define PRINTCOUNTER #if ENABLED(PRINTCOUNTER) #define PRINTCOUNTER_SAVE_INTERVAL 60 // (minutes) EEPROM save interval during print #endif @@ -1936,7 +1938,7 @@ * SD Card support is disabled by default. If your controller has an SD slot, * you must uncomment the following option or it won't work. */ -//#define SDSUPPORT +#define SDSUPPORT /** * SD CARD: ENABLE CRC @@ -2006,7 +2008,7 @@ // // Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. // -//#define INDIVIDUAL_AXIS_HOMING_MENU +#define INDIVIDUAL_AXIS_HOMING_MENU // // SPEAKER/BUZZER @@ -2014,7 +2016,7 @@ // If you have a speaker that can produce tones, enable it here. // By default Marlin assumes you have a buzzer with a fixed frequency. // -//#define SPEAKER +#define SPEAKER // // The duration and frequency for the UI feedback sound. @@ -2023,8 +2025,8 @@ // Note: Test audio output with the G-Code: // M300 S P // -//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 -//#define LCD_FEEDBACK_FREQUENCY_HZ 5000 +#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 50 +#define LCD_FEEDBACK_FREQUENCY_HZ 10 //============================================================================= //======================== LCD / Controller Selection ========================= @@ -2037,7 +2039,7 @@ // // Note: Usually sold with a white PCB. // -//#define REPRAP_DISCOUNT_SMART_CONTROLLER +#define REPRAP_DISCOUNT_SMART_CONTROLLER // // GT2560 (YHCB2004) LCD Display @@ -2618,7 +2620,7 @@ // Use software PWM to drive the fan, as for the heaters. This uses a very low frequency // which is not as annoying as with the hardware PWM. On the other hand, if this frequency // is too low, you should also increment SOFT_PWM_SCALE. -//#define FAN_SOFT_PWM +#define FAN_SOFT_PWM // Incrementing this by 1 will double the software PWM frequency, // affecting heaters, and the fan if FAN_SOFT_PWM is enabled. @@ -2731,15 +2733,15 @@ * Set this manually if there are extra servos needing manual control. * Set to 0 to turn off servo support. */ -//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command +#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command // (ms) Delay before the next move will start, to give the servo time to reach its target angle. // 300ms is a good value but you can try less delay. // If the servo can't reach the requested position, increase it. -#define SERVO_DELAY { 300 } +#define SERVO_DELAY { 300, 300, 300 } // Only power servos during movement, otherwise leave off to prevent jitter //#define DEACTIVATE_SERVOS_AFTER_MOVE // Edit servo angles with M281 and save to EEPROM with M500 -//#define EDITABLE_SERVO_ANGLES +#define EDITABLE_SERVO_ANGLES diff --git a/config/examples/EXP3D/Imprimante multifonction/Configuration_adv.h b/config/examples/EXP3D/Imprimante multifonction/Configuration_adv.h index 5335fa012a..bfb54686dd 100644 --- a/config/examples/EXP3D/Imprimante multifonction/Configuration_adv.h +++ b/config/examples/EXP3D/Imprimante multifonction/Configuration_adv.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "EXP3D/Imprimante multifonction" + /** * Configuration_adv.h * @@ -238,8 +240,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 60 // Seconds + #define THERMAL_PROTECTION_HYSTERESIS 5 // Degrees Celsius //#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops #if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP) @@ -258,36 +260,36 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 20 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 60 // Seconds + #define WATCH_TEMP_INCREASE 5 // Degrees Celsius #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 60 // Seconds + #define THERMAL_PROTECTION_BED_HYSTERESIS 5 // Degrees Celsius /** * As described above, except for the bed (M140/M190/M303). */ #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_INCREASE 5 // Degrees Celsius #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 60 // Seconds + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 5 // Degrees Celsius /** * Heated chamber watch settings (M141/M191). */ #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_INCREASE 5 // Degrees Celsius #endif /** @@ -307,7 +309,7 @@ #if ENABLED(PIDTEMP) // Add an experimental additional term to the heater power, proportional to the extrusion speed. // A well-chosen Kc value should add just enough power to melt the increased material volume. - //#define PID_EXTRUSION_SCALING + #define PID_EXTRUSION_SCALING #if ENABLED(PID_EXTRUSION_SCALING) #define DEFAULT_Kc (100) // heating power = Kc * e_speed #define LPQ_MAX_LEN 50 @@ -341,7 +343,7 @@ * 5. Enable PID_FAN_SCALING_ALTERNATIVE_DEFINITION and enter the two identified Kf-values in * PID_FAN_SCALING_AT_FULL_SPEED and PID_FAN_SCALING_AT_MIN_SPEED. Enter the minimum speed in PID_FAN_SCALING_MIN_SPEED */ - //#define PID_FAN_SCALING + #define PID_FAN_SCALING #if ENABLED(PID_FAN_SCALING) //#define PID_FAN_SCALING_ALTERNATIVE_DEFINITION #if ENABLED(PID_FAN_SCALING_ALTERNATIVE_DEFINITION) @@ -391,7 +393,7 @@ // Show Temperature ADC value // Enable for M105 to include ADC values read from temperature sensors. -//#define SHOW_TEMP_ADC_VALUES +#define SHOW_TEMP_ADC_VALUES /** * High Temperature Thermistor Support @@ -411,14 +413,14 @@ // The number of consecutive low temperature errors that can occur // before a min_temp_error is triggered. (Shouldn't be more than 10.) -//#define MAX_CONSECUTIVE_LOW_TEMPERATURE_ERROR_ALLOWED 0 +#define MAX_CONSECUTIVE_LOW_TEMPERATURE_ERROR_ALLOWED 10 // The number of milliseconds a hotend will preheat before starting to check // the temperature. This value should NOT be set to the time it takes the // hot end to reach the target temperature, but the time it takes to reach // the minimum temperature your thermistor can read. The lower the better/safer. // This shouldn't need to be more than 30 seconds (30000) -//#define MILLISECONDS_PREHEAT_TIME 0 +#define MILLISECONDS_PREHEAT_TIME 30000 // @section extruder @@ -736,13 +738,13 @@ //#define SENSORLESS_BACKOFF_MM { 2, 2 } // (mm) Backoff from endstops before sensorless homing -#define HOMING_BUMP_MM { 5, 5, 2 } // (mm) Backoff from endstops after first bump -#define HOMING_BUMP_DIVISOR { 2, 2, 4 } // Re-Bump Speed Divisor (Divides the Homing Feedrate) +#define HOMING_BUMP_MM { 4, 4, 4 } // (mm) Backoff from endstops after first bump +#define HOMING_BUMP_DIVISOR { 4, 4, 4 } // Re-Bump Speed Divisor (Divides the Homing Feedrate) //#define HOMING_BACKOFF_POST_MM { 2, 2, 2 } // (mm) Backoff from endstops after homing -//#define QUICK_HOME // If G28 contains XY do a diagonal move first -//#define HOME_Y_BEFORE_X // If G28 contains XY home Y before X +#define QUICK_HOME // If G28 contains XY do a diagonal move first +#define HOME_Y_BEFORE_X // If G28 contains XY home Y before X //#define HOME_Z_FIRST // Home Z first. Requires a Z-MIN endstop (not a probe). //#define CODEPENDENT_XY_HOMING // If X/Y can't home without homing Y/X first @@ -867,7 +869,7 @@ // On a 300mm bed a 5% grade would give a misalignment of ~1.5cm #define G34_MAX_GRADE 5 // (%) Maximum incline that G34 will handle - #define Z_STEPPER_ALIGN_ITERATIONS 5 // Number of iterations to apply during alignment + #define Z_STEPPER_ALIGN_ITERATIONS 3 // Number of iterations to apply during alignment #define Z_STEPPER_ALIGN_ACC 0.02 // Stop iterating early if the accuracy is better than this #define RESTORE_LEVELING_AFTER_G34 // Restore leveling after G34 is done? // After G34, re-home Z (G28 Z) or just calculate it from the last probe heights? @@ -925,7 +927,7 @@ * Set DISABLE_INACTIVE_? 'true' to shut down axis steppers after an idle period. * The Deactive Time can be overridden with M18 and M84. Set to 0 for No Timeout. */ -#define DEFAULT_STEPPER_DEACTIVE_TIME 120 +#define DEFAULT_STEPPER_DEACTIVE_TIME 600 #define DISABLE_INACTIVE_X true #define DISABLE_INACTIVE_Y true #define DISABLE_INACTIVE_Z true // Set 'false' if the nozzle could fall onto your printed part! @@ -936,7 +938,7 @@ #define DEFAULT_MINTRAVELFEEDRATE 0.0 // (mm/s) Minimum travel feedrate. Set with M205 T. // Minimum time that a segment needs to take as the buffer gets emptied -#define DEFAULT_MINSEGMENTTIME 20000 // (µs) Set with M205 B. +#define DEFAULT_MINSEGMENTTIME 60000 // (µs) Set with M205 B. // Slow down the machine if the lookahead buffer is (by default) half full. // Increase the slowdown divisor for larger buffer sizes. @@ -951,7 +953,7 @@ * See https://hydraraptor.blogspot.com/2010/12/frequency-limit.html * Use M201 F G to change limits at runtime. */ -//#define XY_FREQUENCY_LIMIT 10 // (Hz) Maximum frequency of small zigzag infill moves. Set with M201 F. +#define XY_FREQUENCY_LIMIT 15 // (Hz) Maximum frequency of small zigzag infill moves. Set with M201 F. #ifdef XY_FREQUENCY_LIMIT #define XY_FREQUENCY_MIN_PERCENT 5 // (percent) Minimum FR percentage to apply. Set with M201 G. #endif @@ -965,7 +967,7 @@ // Backlash Compensation // Adds extra movement to axes on direction-changes to account for backlash. // -//#define BACKLASH_COMPENSATION +#define BACKLASH_COMPENSATION #if ENABLED(BACKLASH_COMPENSATION) // Define values for backlash distance and correction. // If BACKLASH_GCODE is enabled these values are the defaults. @@ -977,10 +979,10 @@ // Set BACKLASH_SMOOTHING_MM to spread backlash correction over multiple segments // to reduce print artifacts. (Enabling this is costly in memory and computation!) - //#define BACKLASH_SMOOTHING_MM 3 // (mm) + #define BACKLASH_SMOOTHING_MM 10 // (mm) // Add runtime configuration and tuning of backlash values (M425) - //#define BACKLASH_GCODE + #define BACKLASH_GCODE #if ENABLED(BACKLASH_GCODE) // Measure the Z backlash when probing (G29) and set with "M425 Z" @@ -1059,7 +1061,7 @@ * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the * lowest stepping frequencies. */ -//#define ADAPTIVE_STEP_SMOOTHING +#define ADAPTIVE_STEP_SMOOTHING /** * Custom Microstepping @@ -1145,7 +1147,7 @@ // Change values more rapidly when the encoder is rotated faster #define ENCODER_RATE_MULTIPLIER #if ENABLED(ENCODER_RATE_MULTIPLIER) - #define ENCODER_10X_STEPS_PER_SEC 30 // (steps/s) Encoder rate for 10x speed + #define ENCODER_10X_STEPS_PER_SEC 40 // (steps/s) Encoder rate for 10x speed #define ENCODER_100X_STEPS_PER_SEC 80 // (steps/s) Encoder rate for 100x speed #endif @@ -1175,13 +1177,13 @@ #endif // Include a page of printer information in the LCD Main Menu - //#define LCD_INFO_MENU + #define LCD_INFO_MENU #if ENABLED(LCD_INFO_MENU) //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages #endif // BACK menu items keep the highlight at the top - //#define TURBO_BACK_MENU_ITEM + #define TURBO_BACK_MENU_ITEM // Add a mute option to the LCD menu //#define SOUND_MENU_ITEM @@ -1219,7 +1221,7 @@ #if HAS_DISPLAY // The timeout (in ms) to return to the status screen from sub-menus - //#define LCD_TIMEOUT_TO_STATUS 15000 + #define LCD_TIMEOUT_TO_STATUS 60000 #if ENABLED(SHOW_BOOTSCREEN) #define BOOTSCREEN_TIMEOUT 4000 // (ms) Total Duration to display the boot screen(s) @@ -1229,23 +1231,23 @@ #endif // Scroll a longer status message into view - //#define STATUS_MESSAGE_SCROLLING + #define STATUS_MESSAGE_SCROLLING // On the Info Screen, display XY with one decimal place when possible - //#define LCD_DECIMAL_SMALL_XY + #define LCD_DECIMAL_SMALL_XY // Add an 'M73' G-code to set the current percentage - //#define LCD_SET_PROGRESS_MANUALLY + #define LCD_SET_PROGRESS_MANUALLY // Show the E position (filament used) during printing - //#define LCD_SHOW_E_TOTAL + #define LCD_SHOW_E_TOTAL #endif #if EITHER(SDSUPPORT, LCD_SET_PROGRESS_MANUALLY) && ANY(HAS_MARLINUI_U8GLIB, HAS_MARLINUI_HD44780, IS_TFTGLCD_PANEL, EXTENSIBLE_UI) - //#define SHOW_REMAINING_TIME // Display estimated time to completion + #define SHOW_REMAINING_TIME // Display estimated time to completion #if ENABLED(SHOW_REMAINING_TIME) - //#define USE_M73_REMAINING_TIME // Use remaining time from M73 command instead of estimation - //#define ROTATE_PROGRESS_DISPLAY // Display (P)rogress, (E)lapsed, and (R)emaining time + #define USE_M73_REMAINING_TIME // Use remaining time from M73 command instead of estimation + #define ROTATE_PROGRESS_DISPLAY // Display (P)rogress, (E)lapsed, and (R)emaining time #endif #if EITHER(HAS_MARLINUI_U8GLIB, EXTENSIBLE_UI) @@ -1253,10 +1255,10 @@ #endif #if EITHER(HAS_MARLINUI_HD44780, IS_TFTGLCD_PANEL) - //#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing + #define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing #if ENABLED(LCD_PROGRESS_BAR) - #define PROGRESS_BAR_BAR_TIME 2000 // (ms) Amount of time to show the bar - #define PROGRESS_BAR_MSG_TIME 3000 // (ms) Amount of time to show the status message + #define PROGRESS_BAR_BAR_TIME 0 // (ms) Amount of time to show the bar + #define PROGRESS_BAR_MSG_TIME 3500 // (ms) Amount of time to show the status message #define PROGRESS_MSG_EXPIRE 0 // (ms) Amount of time to retain the status message (0=forever) //#define PROGRESS_MSG_ONCE // Show the message for MSG_TIME then clear it //#define LCD_PROGRESS_BAR_TEST // Add a menu item to test the progress bar @@ -1297,7 +1299,7 @@ #define SD_MENU_CONFIRM_START // Confirm the selected SD file before printing //#define NO_SD_AUTOSTART // Remove auto#.g file support completely to save some Flash, SRAM - //#define MENU_ADDAUTOSTART // Add a menu option to run auto#.g files + #define MENU_ADDAUTOSTART // Add a menu option to run auto#.g files //#define BROWSE_MEDIA_ON_INSERT // Open the file browser when media is inserted @@ -1381,10 +1383,10 @@ //#define UTF_FILENAME_SUPPORT // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT + #define LONG_FILENAME_HOST_SUPPORT // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES + #define SCROLL_LONG_FILENAMES // Leave the heaters on after Stop Print (not recommended!) //#define SD_ABORT_NO_COOLDOWN @@ -1406,7 +1408,7 @@ /** * Auto-report SdCard status with M27 S */ - //#define AUTO_REPORT_SD_STATUS + #define AUTO_REPORT_SD_STATUS /** * Support for USB thumb drives using an Arduino USB Host Shield or @@ -1465,7 +1467,7 @@ #endif // Add an optimized binary file transfer mode, initiated with 'M28 B1' - //#define BINARY_FILE_TRANSFER + #define BINARY_FILE_TRANSFER /** * Set this option to one of the following (or the board's defaults apply): @@ -1562,10 +1564,10 @@ */ //#define STATUS_COMBINE_HEATERS // Use combined heater images instead of separate ones //#define STATUS_HOTEND_NUMBERLESS // Use plain hotend icons instead of numbered ones (with 2+ hotends) - #define STATUS_HOTEND_INVERTED // Show solid nozzle bitmaps when heating (Requires STATUS_HOTEND_ANIM) - #define STATUS_HOTEND_ANIM // Use a second bitmap to indicate hotend heating - #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating - #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating + //#define STATUS_HOTEND_INVERTED // Show solid nozzle bitmaps when heating (Requires STATUS_HOTEND_ANIM) + //#define STATUS_HOTEND_ANIM // Use a second bitmap to indicate hotend heating + //#define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating + //#define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating //#define STATUS_CUTTER_ANIM // Use a second bitmap to indicate spindle / laser active //#define STATUS_COOLER_ANIM // Use a second bitmap to indicate laser cooling //#define STATUS_FLOWMETER_ANIM // Use multiple bitmaps to indicate coolant flow @@ -1790,20 +1792,20 @@ * * Warning: Does not respect endstops! */ -//#define BABYSTEPPING +#define BABYSTEPPING #if ENABLED(BABYSTEPPING) //#define INTEGRATED_BABYSTEPPING // EXPERIMENTAL integration of babystepping into the Stepper ISR //#define BABYSTEP_WITHOUT_HOMING - //#define BABYSTEP_ALWAYS_AVAILABLE // Allow babystepping at all times (not just during movement). + #define BABYSTEP_ALWAYS_AVAILABLE // Allow babystepping at all times (not just during movement). //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way //#define BABYSTEP_MILLIMETER_UNITS // Specify BABYSTEP_MULTIPLICATOR_(XY|Z) in mm instead of micro-steps #define BABYSTEP_MULTIPLICATOR_Z 1 // (steps or mm) Steps or millimeter distance for each Z babystep #define BABYSTEP_MULTIPLICATOR_XY 1 // (steps or mm) Steps or millimeter distance for each XY babystep - //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. + #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 2000 // Maximum interval between clicks, in milliseconds. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on doubleclick when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) @@ -1837,12 +1839,12 @@ * * See https://marlinfw.org/docs/features/lin_advance.html for full instructions. */ -//#define LIN_ADVANCE +#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants - #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed + #define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants + #define LIN_ADVANCE_K 0 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // If enabled, this will generate debug information output over USB. - //#define EXPERIMENTAL_SCURVE // Enable this option to permit S-Curve Acceleration + #define EXPERIMENTAL_SCURVE // Enable this option to permit S-Curve Acceleration #endif // @section leveling @@ -1852,12 +1854,12 @@ * Override if the automatically selected points are inadequate. */ #if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL) - //#define PROBE_PT_1_X 15 - //#define PROBE_PT_1_Y 180 - //#define PROBE_PT_2_X 15 - //#define PROBE_PT_2_Y 20 - //#define PROBE_PT_3_X 170 - //#define PROBE_PT_3_Y 20 + #define PROBE_PT_1_X 15 + #define PROBE_PT_1_Y 180 + #define PROBE_PT_2_X 15 + #define PROBE_PT_2_Y 20 + #define PROBE_PT_3_X 170 + #define PROBE_PT_3_Y 20 #endif /** @@ -1902,7 +1904,7 @@ * Repeatedly attempt G29 leveling until it succeeds. * Stop after G29_MAX_RETRIES attempts. */ -//#define G29_RETRY_AND_RECOVER +#define G29_RETRY_AND_RECOVER #if ENABLED(G29_RETRY_AND_RECOVER) #define G29_MAX_RETRIES 3 #define G29_HALT_ON_FAILURE @@ -1989,13 +1991,13 @@ #define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle //#define ARC_SEGMENTS_PER_SEC 50 // Use feedrate to choose segment length (with MM_PER_ARC_SEGMENT as the minimum) #define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections - //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles - //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes + #define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles + #define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes //#define SF_ARC_FIX // Enable only if using SkeinForge with "Arc Point" fillet procedure #endif // Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes. -//#define BEZIER_CURVE_SUPPORT +#define BEZIER_CURVE_SUPPORT /** * Direct Stepping @@ -2115,7 +2117,7 @@ #endif // Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE +#define BAUD_RATE_GCODE #if ENABLED(SDSUPPORT) // Enable this option to collect and display the maximum @@ -2141,7 +2143,7 @@ * Currently handles M108, M112, M410, M876 * NOTE: Not yet implemented for all platforms. */ -//#define EMERGENCY_PARSER +#define EMERGENCY_PARSER /** * Realtime Reporting (requires EMERGENCY_PARSER) @@ -2170,7 +2172,7 @@ //#define NO_TIMEOUTS 1000 // Milliseconds // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. -//#define ADVANCED_OK +#define ADVANCED_OK // Printrun may have trouble receiving long strings all at once. // This option inserts short delays between lines of serial output. @@ -2188,7 +2190,7 @@ * 'M106 P T2' : Use the set secondary speed * 'M106 P T1' : Restore the previous fan speed */ -//#define EXTRA_FAN_SPEED +#define EXTRA_FAN_SPEED /** * Firmware-based and LCD-controlled retract @@ -2311,7 +2313,7 @@ * * Enable PARK_HEAD_ON_PAUSE to add the G-code M125 Pause and Park. */ -//#define ADVANCED_PAUSE_FEATURE +#define ADVANCED_PAUSE_FEATURE #if ENABLED(ADVANCED_PAUSE_FEATURE) #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. @@ -2337,7 +2339,7 @@ // Filament can be extruded repeatedly from the Filament Change menu // until extrusion is consistent, and to purge old filament. #define ADVANCED_PAUSE_RESUME_PRIME 0 // (mm) Extra distance to prime nozzle after returning from park. - //#define ADVANCED_PAUSE_FANS_PAUSE // Turn off print-cooling fans while the machine is paused. + #define ADVANCED_PAUSE_FANS_PAUSE // Turn off print-cooling fans while the machine is paused. // Filament Unload does a Retract, Delay, and Purge first: #define FILAMENT_UNLOAD_PURGE_RETRACT 13 // (mm) Unload initial retract length. @@ -2349,11 +2351,11 @@ #define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed. #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change. - //#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. - //#define HOME_BEFORE_FILAMENT_CHANGE // If needed, home before parking for filament change + #define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. + #define HOME_BEFORE_FILAMENT_CHANGE // If needed, home before parking for filament change - //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. - //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) + #define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. + #define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) #endif // @section tmc @@ -3409,7 +3411,7 @@ * Enables G53 and G54-G59.3 commands to select coordinate systems * and G92.1 to reset the workspace to native machine space. */ -//#define CNC_COORDINATE_SYSTEMS +#define CNC_COORDINATE_SYSTEMS /** * Auto-report temperatures with M155 S @@ -3474,7 +3476,7 @@ //#define NO_WORKSPACE_OFFSETS // Extra options for the M114 "Current Position" report -//#define M114_DETAIL // Use 'M114` for details to check planner calculations +#define M114_DETAIL // Use 'M114` for details to check planner calculations //#define M114_REALTIME // Real current position based on forward kinematics //#define M114_LEGACY // M114 used to synchronize on every call. Enable if needed. @@ -3546,32 +3548,32 @@ */ // Custom Menu: Main Menu -//#define CUSTOM_MENU_MAIN +#define CUSTOM_MENU_MAIN #if ENABLED(CUSTOM_MENU_MAIN) - //#define CUSTOM_MENU_MAIN_TITLE "Custom Commands" - #define CUSTOM_MENU_MAIN_SCRIPT_DONE "M117 User Script Done" + #define CUSTOM_MENU_MAIN_TITLE "Lin Adv Presets" + #define CUSTOM_MENU_MAIN_SCRIPT_DONE "M117 Set & Saved" #define CUSTOM_MENU_MAIN_SCRIPT_AUDIBLE_FEEDBACK - //#define CUSTOM_MENU_MAIN_SCRIPT_RETURN // Return to status screen after a script + #define CUSTOM_MENU_MAIN_SCRIPT_RETURN // Return to status screen after a script #define CUSTOM_MENU_MAIN_ONLY_IDLE // Only show custom menu when the machine is idle - #define MAIN_MENU_ITEM_1_DESC "Home & UBL Info" - #define MAIN_MENU_ITEM_1_GCODE "G28\nG29 W" + #define MAIN_MENU_ITEM_1_DESC "K0 Off" + #define MAIN_MENU_ITEM_1_GCODE "M900 K0\nM500" //#define MAIN_MENU_ITEM_1_CONFIRM // Show a confirmation dialog before this action - #define MAIN_MENU_ITEM_2_DESC "Preheat for " PREHEAT_1_LABEL - #define MAIN_MENU_ITEM_2_GCODE "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND) + #define MAIN_MENU_ITEM_2_DESC "K0.2" + #define MAIN_MENU_ITEM_2_GCODE "M900 K0.2\nM500" //#define MAIN_MENU_ITEM_2_CONFIRM - //#define MAIN_MENU_ITEM_3_DESC "Preheat for " PREHEAT_2_LABEL - //#define MAIN_MENU_ITEM_3_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) + #define MAIN_MENU_ITEM_3_DESC "K0.3" + #define MAIN_MENU_ITEM_3_GCODE "M900 K0.3\nM500" //#define MAIN_MENU_ITEM_3_CONFIRM - //#define MAIN_MENU_ITEM_4_DESC "Heat Bed/Home/Level" - //#define MAIN_MENU_ITEM_4_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29" + #define MAIN_MENU_ITEM_4_DESC "K0.4" + #define MAIN_MENU_ITEM_4_GCODE "M900 K0.4\nM500" //#define MAIN_MENU_ITEM_4_CONFIRM - //#define MAIN_MENU_ITEM_5_DESC "Home & Info" - //#define MAIN_MENU_ITEM_5_GCODE "G28\nM503" + #define MAIN_MENU_ITEM_5_DESC "K0.5" + #define MAIN_MENU_ITEM_5_GCODE "M900 K0.5\nM500" //#define MAIN_MENU_ITEM_5_CONFIRM #endif @@ -3650,9 +3652,9 @@ * Host Prompt Support enables Marlin to use the host for user prompts so * filament runout and other processes can be managed from the host side. */ -//#define HOST_ACTION_COMMANDS +#define HOST_ACTION_COMMANDS #if ENABLED(HOST_ACTION_COMMANDS) - //#define HOST_PROMPT_SUPPORT + #define HOST_PROMPT_SUPPORT //#define HOST_START_MENU_ITEM // Add a menu item that tells the host to start #endif @@ -3661,10 +3663,7 @@ * * Implement M486 to allow Marlin to skip objects */ -//#define CANCEL_OBJECTS -#if ENABLED(CANCEL_OBJECTS) - #define CANCEL_OBJECTS_REPORTING // Emit the current object as a status message -#endif +#define CANCEL_OBJECTS /** * I2C position encoders for closed loop control. diff --git a/config/examples/Einstart-S/Configuration.h b/config/examples/Einstart-S/Configuration.h index 78c2dc9160..bfab580b2f 100644 --- a/config/examples/Einstart-S/Configuration.h +++ b/config/examples/Einstart-S/Configuration.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Einstart-S" + /** * Configuration.h * @@ -69,7 +71,7 @@ // @section info // Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes. +#define STRING_CONFIG_H_AUTHOR "elsie tech corp" // Who made the changes. //#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) /** @@ -134,11 +136,11 @@ // Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_RAMPS_14_EFB + #define MOTHERBOARD BOARD_EINSTART_S #endif // Name displayed in the LCD "Ready" message and Info menu -//#define CUSTOM_MACHINE_NAME "3D Printer" +#define CUSTOM_MACHINE_NAME "The Shining" // Printer's unique ID, used by some programs to differentiate between machines. // Choose your own or use a service like https://www.uuidgenerator.net/version4 @@ -416,7 +418,7 @@ * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. */ -#define TEMP_SENSOR_0 1 +#define TEMP_SENSOR_0 666 #define TEMP_SENSOR_1 0 #define TEMP_SENSOR_2 0 #define TEMP_SENSOR_3 0 @@ -510,16 +512,17 @@ //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) // Set/get with gcode: M301 E[extruder number, 0-2] + // Einstart S - Autotune M303 S180 C8 #if ENABLED(PID_PARAMS_PER_HOTEND) // Specify between 1 and HOTENDS values per array. // If fewer than EXTRUDER values are provided, the last element will be repeated. - #define DEFAULT_Kp_LIST { 22.20, 22.20 } - #define DEFAULT_Ki_LIST { 1.08, 1.08 } - #define DEFAULT_Kd_LIST { 114.00, 114.00 } + #define DEFAULT_Kp_LIST { 15.31, 15.31 } + #define DEFAULT_Ki_LIST { 0.93, 0.93 } + #define DEFAULT_Kd_LIST { 63.03, 63.03 } #else - #define DEFAULT_Kp 22.20 - #define DEFAULT_Ki 1.08 - #define DEFAULT_Kd 114.00 + #define DEFAULT_Kp 15.31 + #define DEFAULT_Ki 0.93 + #define DEFAULT_Kd 63.03 #endif #endif // PIDTEMP @@ -685,10 +688,10 @@ // extra connectors. Leave undefined any used for non-endstop and non-probe purposes. #define USE_XMIN_PLUG #define USE_YMIN_PLUG -#define USE_ZMIN_PLUG +//#define USE_ZMIN_PLUG //#define USE_XMAX_PLUG //#define USE_YMAX_PLUG -//#define USE_ZMAX_PLUG +#define USE_ZMAX_PLUG // Enable pullup for all endstops to prevent a floating state #define ENDSTOPPULLUPS @@ -717,13 +720,17 @@ #endif // Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define X_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_PROBE_ENDSTOP_INVERTING false // Set to true to invert the logic of the probe. +#define X_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Y_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +//#define Z_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. +//#define X_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. +//#define Y_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. +#define Z_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +//#define Z_MIN_PROBE_ENDSTOP_INVERTING false // Set to true to invert the logic of the probe. + +#define X_STOP_INVERTING true +#define Y_STOP_INVERTING true +#define Z_STOP_INVERTING true /** * Stepper Drivers @@ -806,7 +813,7 @@ * Override with M92 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 500 } +#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 80, 96.337120 } /** * Default Max Feed Rate (mm/s) @@ -826,7 +833,7 @@ * Override with M201 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 } +#define DEFAULT_MAX_ACCELERATION { 2000, 2000, 100, 10000 } //#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 #if ENABLED(LIMITED_MAX_ACCEL_EDITING) @@ -841,9 +848,9 @@ * M204 R Retract Acceleration * M204 T Travel Acceleration */ -#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves +#define DEFAULT_ACCELERATION 2000 // X, Y, Z and E acceleration for printing moves +#define DEFAULT_RETRACT_ACCELERATION 2000 // E acceleration for retracts +#define DEFAULT_TRAVEL_ACCELERATION 2000 // X, Y, Z acceleration for travel (non printing) moves /** * Default Jerk limits (mm/s) @@ -877,7 +884,7 @@ * https://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html */ #if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.013 // (mm) Distance from real junction edge + #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge #define JD_HANDLE_SMALL_SEGMENTS // Use curvature estimation instead of just the junction angle // for small segments (< 1mm) with large junction angles (> 135°). #endif @@ -890,7 +897,7 @@ * * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained */ -//#define S_CURVE_ACCELERATION +#define S_CURVE_ACCELERATION //=========================================================================== //============================= Z Probe Options ============================= @@ -906,7 +913,7 @@ * The probe replaces the Z-MIN endstop and is used for Z homing. * (Automatically enables USE_PROBE_FOR_Z_HOMING.) */ -#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN +//#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN // Force the use of the probe for Z-axis homing //#define USE_PROBE_FOR_Z_HOMING @@ -1168,10 +1175,10 @@ // For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1 // :{ 0:'Low', 1:'High' } -#define X_ENABLE_ON 0 -#define Y_ENABLE_ON 0 -#define Z_ENABLE_ON 0 -#define E_ENABLE_ON 0 // For all extruders +#define X_ENABLE_ON 1 +#define Y_ENABLE_ON 1 +#define Z_ENABLE_ON 1 +#define E_ENABLE_ON 1 // For all extruders // Disable axis steppers immediately when they're not being stepped. // WARNING: When motors turn off there is a chance of losing position accuracy! @@ -1190,9 +1197,9 @@ // @section machine // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR false -#define INVERT_Y_DIR true -#define INVERT_Z_DIR false +#define INVERT_X_DIR true +#define INVERT_Y_DIR false +#define INVERT_Z_DIR true // @section extruder @@ -1216,7 +1223,7 @@ * - Use a low value (i.e., Z_MIN_POS) if the nozzle falls down to the bed. * - Use a large value (i.e., Z_MAX_POS) if the bed falls down, away from the nozzle. */ -//#define Z_IDLE_HEIGHT Z_HOME_POS +#define Z_IDLE_HEIGHT Z_MAX_POS //#define Z_HOMING_HEIGHT 4 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ... // Be sure to have this much clearance over your Z_MAX_POS to prevent grinding. @@ -1227,13 +1234,13 @@ // :[-1,1] #define X_HOME_DIR -1 #define Y_HOME_DIR -1 -#define Z_HOME_DIR -1 +#define Z_HOME_DIR 1 // @section machine // The size of the printable area -#define X_BED_SIZE 200 -#define Y_BED_SIZE 200 +#define X_BED_SIZE 160 +#define Y_BED_SIZE 160 // Travel limits (mm) after homing, corresponding to endstop positions. #define X_MIN_POS 0 @@ -1241,7 +1248,7 @@ #define Z_MIN_POS 0 #define X_MAX_POS X_BED_SIZE #define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 200 +#define Z_MAX_POS 165 /** * Software Endstops @@ -1672,7 +1679,7 @@ * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) */ -//#define EEPROM_SETTINGS // Persistent storage with M500 and M501 +#define EEPROM_SETTINGS // Persistent storage with M500 and M501 //#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. #define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load @@ -1936,7 +1943,7 @@ * SD Card support is disabled by default. If your controller has an SD slot, * you must uncomment the following option or it won't work. */ -//#define SDSUPPORT +#define SDSUPPORT /** * SD CARD: ENABLE CRC diff --git a/config/examples/Einstart-S/Configuration_adv.h b/config/examples/Einstart-S/Configuration_adv.h index 5335fa012a..b2dbb286d6 100644 --- a/config/examples/Einstart-S/Configuration_adv.h +++ b/config/examples/Einstart-S/Configuration_adv.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Einstart-S" + /** * Configuration_adv.h * @@ -867,7 +869,7 @@ // On a 300mm bed a 5% grade would give a misalignment of ~1.5cm #define G34_MAX_GRADE 5 // (%) Maximum incline that G34 will handle - #define Z_STEPPER_ALIGN_ITERATIONS 5 // Number of iterations to apply during alignment + #define Z_STEPPER_ALIGN_ITERATIONS 3 // Number of iterations to apply during alignment #define Z_STEPPER_ALIGN_ACC 0.02 // Stop iterating early if the accuracy is better than this #define RESTORE_LEVELING_AFTER_G34 // Restore leveling after G34 is done? // After G34, re-home Z (G28 Z) or just calculate it from the last probe heights? @@ -2050,7 +2052,7 @@ * * Override the default value based on the driver type set in Configuration.h. */ -//#define MINIMUM_STEPPER_PULSE 2 +#define MINIMUM_STEPPER_PULSE 2 /** * Maximum stepping rate (in Hz) the stepper driver allows @@ -2064,7 +2066,7 @@ * * Override the default value based on the driver type set in Configuration.h. */ -//#define MAXIMUM_STEPPER_RATE 250000 +#define MAXIMUM_STEPPER_RATE 250000 // @section temperature diff --git a/config/examples/Eryone/Thinker SE/Configuration.h b/config/examples/Eryone/Thinker SE/Configuration.h index 78c2dc9160..0ccb599948 100644 --- a/config/examples/Eryone/Thinker SE/Configuration.h +++ b/config/examples/Eryone/Thinker SE/Configuration.h @@ -1,6 +1,6 @@ /** * Marlin 3D Printer Firmware - * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * Copyright (c) 2021 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * * Based on Sprinter and grbl. * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm @@ -21,6 +21,10 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Eryone/Thinker SE" + +#define THINKERV2_BLTOUCH // Enable for an installed BLTOUCH + /** * Configuration.h * @@ -69,7 +73,7 @@ // @section info // Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes. +#define STRING_CONFIG_H_AUTHOR "(Dana Olson, BLTouch+Runout)" // Who made the changes. //#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) /** @@ -87,7 +91,7 @@ #define SHOW_BOOTSCREEN // Show the bitmap in Marlin/_Bootscreen.h on startup. -//#define SHOW_CUSTOM_BOOTSCREEN +#define SHOW_CUSTOM_BOOTSCREEN // Show the bitmap in Marlin/_Statusscreen.h on the status screen. //#define CUSTOM_STATUS_SCREEN_IMAGE @@ -134,11 +138,15 @@ // Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_RAMPS_14_EFB + #define MOTHERBOARD BOARD_RAMBO_THINKERV2 #endif // Name displayed in the LCD "Ready" message and Info menu -//#define CUSTOM_MACHINE_NAME "3D Printer" +#ifdef THINKERV2_BLTOUCH + #define CUSTOM_MACHINE_NAME "Thinker SE+" +#else + #define CUSTOM_MACHINE_NAME "Thinker SE" +#endif // Printer's unique ID, used by some programs to differentiate between machines. // Choose your own or use a service like https://www.uuidgenerator.net/version4 @@ -416,7 +424,7 @@ * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. */ -#define TEMP_SENSOR_0 1 +#define TEMP_SENSOR_0 13 #define TEMP_SENSOR_1 0 #define TEMP_SENSOR_2 0 #define TEMP_SENSOR_3 0 @@ -424,7 +432,7 @@ #define TEMP_SENSOR_5 0 #define TEMP_SENSOR_6 0 #define TEMP_SENSOR_7 0 -#define TEMP_SENSOR_BED 0 +#define TEMP_SENSOR_BED 13 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 #define TEMP_SENSOR_COOLER 0 @@ -558,8 +566,8 @@ // 120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) // from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) - #define DEFAULT_bedKp 10.00 - #define DEFAULT_bedKi .023 + #define DEFAULT_bedKp 100.00 + #define DEFAULT_bedKi 5.023 #define DEFAULT_bedKd 305.4 // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. @@ -634,7 +642,7 @@ * Note: For Bowden Extruders make this large enough to allow load/unload. */ #define PREVENT_LENGTHY_EXTRUDE -#define EXTRUDE_MAXLENGTH 200 +#define EXTRUDE_MAXLENGTH 600 //=========================================================================== //======================== Thermal Runaway Protection ======================= @@ -717,13 +725,13 @@ #endif // Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. +#define X_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Y_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Z_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. #define X_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. #define Y_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. #define Z_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_PROBE_ENDSTOP_INVERTING false // Set to true to invert the logic of the probe. +#define Z_MIN_PROBE_ENDSTOP_INVERTING true // Set to true to invert the logic of the probe. /** * Stepper Drivers @@ -743,15 +751,15 @@ * TMC5130, TMC5130_STANDALONE, TMC5160, TMC5160_STANDALONE * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'L6474', 'POWERSTEP01', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2160', 'TMC2160_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC2209', 'TMC2209_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE', 'TMC5160', 'TMC5160_STANDALONE'] */ -#define X_DRIVER_TYPE A4988 -#define Y_DRIVER_TYPE A4988 -#define Z_DRIVER_TYPE A4988 +#define X_DRIVER_TYPE TMC2208_STANDALONE +#define Y_DRIVER_TYPE TMC2208_STANDALONE +#define Z_DRIVER_TYPE TMC2208_STANDALONE //#define X2_DRIVER_TYPE A4988 //#define Y2_DRIVER_TYPE A4988 //#define Z2_DRIVER_TYPE A4988 //#define Z3_DRIVER_TYPE A4988 //#define Z4_DRIVER_TYPE A4988 -#define E0_DRIVER_TYPE A4988 +#define E0_DRIVER_TYPE TMC2208_STANDALONE //#define E1_DRIVER_TYPE A4988 //#define E2_DRIVER_TYPE A4988 //#define E3_DRIVER_TYPE A4988 @@ -779,7 +787,7 @@ //#define ENDSTOP_NOISE_THRESHOLD 2 // Check for stuck or disconnected endstops during homing moves. -//#define DETECT_BROKEN_ENDSTOP +#define DETECT_BROKEN_ENDSTOP //============================================================================= //============================== Movement Settings ============================ @@ -806,14 +814,14 @@ * Override with M92 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 500 } +#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 93 } /** * Default Max Feed Rate (mm/s) * Override with M203 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 } +#define DEFAULT_MAX_FEEDRATE { 300, 300, 35, 25 } //#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 #if ENABLED(LIMITED_MAX_FR_EDITING) @@ -826,7 +834,7 @@ * Override with M201 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 } +#define DEFAULT_MAX_ACCELERATION { 1500, 1500, 150, 1500 } //#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 #if ENABLED(LIMITED_MAX_ACCEL_EDITING) @@ -841,9 +849,9 @@ * M204 R Retract Acceleration * M204 T Travel Acceleration */ -#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves +#define DEFAULT_ACCELERATION 1250 // X, Y, Z and E acceleration for printing moves +#define DEFAULT_RETRACT_ACCELERATION 1250 // E acceleration for retracts +#define DEFAULT_TRAVEL_ACCELERATION 1500 // X, Y, Z acceleration for travel (non printing) moves /** * Default Jerk limits (mm/s) @@ -853,7 +861,7 @@ * When changing speed and direction, if the difference is less than the * value set here, it may happen instantaneously. */ -//#define CLASSIC_JERK +#define CLASSIC_JERK #if ENABLED(CLASSIC_JERK) #define DEFAULT_XJERK 10.0 #define DEFAULT_YJERK 10.0 @@ -890,7 +898,7 @@ * * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained */ -//#define S_CURVE_ACCELERATION +#define S_CURVE_ACCELERATION //=========================================================================== //============================= Z Probe Options ============================= @@ -963,7 +971,9 @@ /** * The BLTouch probe uses a Hall effect sensor and emulates a servo. */ -//#define BLTOUCH +#ifdef THINKERV2_BLTOUCH + #define BLTOUCH +#endif /** * Touch-MI Probe by hotends.fr @@ -1055,7 +1065,8 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +// this is for the BLTouch mount designed by Eryone: https://www.thingiverse.com/thing:4585251 +#define NOZZLE_TO_PROBE_OFFSET { 30, 0, 0 } // Most probes should stay away from the edges of the bed, but // with NOZZLE_AS_PROBE this can be negative for a wider probing area. @@ -1128,7 +1139,7 @@ #define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes //#define Z_AFTER_PROBING 5 // Z position after probing is done -#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping +#define Z_PROBE_LOW_POINT -3 // Farthest distance below the trigger-point to go before stopping // For M851 give a range for adjusting the Z probe offset #define Z_PROBE_OFFSET_RANGE_MIN -20 @@ -1152,12 +1163,12 @@ */ //#define PROBING_HEATERS_OFF // Turn heaters off when probing #if ENABLED(PROBING_HEATERS_OFF) - //#define WAIT_FOR_BED_HEATER // Wait for bed to heat back up between probes (to improve accuracy) + #define WAIT_FOR_BED_HEATER // Wait for bed to heat back up between probes (to improve accuracy) //#define WAIT_FOR_HOTEND // Wait for hotend to heat back up between probes (to improve accuracy & prevent cold extrude) #endif -//#define PROBING_FANS_OFF // Turn fans off when probing +#define PROBING_FANS_OFF // Turn fans off when probing //#define PROBING_STEPPERS_OFF // Turn steppers off (unless needed to hold position) when probing -//#define DELAY_BEFORE_PROBING 200 // (ms) To prevent vibrations from triggering piezo sensors +#define DELAY_BEFORE_PROBING 200 // (ms) To prevent vibrations from triggering piezo sensors // Require minimum nozzle and/or bed temperature for probing //#define PREHEAT_BEFORE_PROBING @@ -1190,14 +1201,14 @@ // @section machine // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR false -#define INVERT_Y_DIR true +#define INVERT_X_DIR true +#define INVERT_Y_DIR false #define INVERT_Z_DIR false // @section extruder // For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR false +#define INVERT_E0_DIR true #define INVERT_E1_DIR false #define INVERT_E2_DIR false #define INVERT_E3_DIR false @@ -1208,8 +1219,8 @@ // @section homing -//#define NO_MOTION_BEFORE_HOMING // Inhibit movement until all axes have been homed. Also enable HOME_AFTER_DEACTIVATE for extra safety. -//#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated. Also enable NO_MOTION_BEFORE_HOMING for extra safety. +#define NO_MOTION_BEFORE_HOMING // Inhibit movement until all axes have been homed. Also enable HOME_AFTER_DEACTIVATE for extra safety. +#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated. Also enable NO_MOTION_BEFORE_HOMING for extra safety. /** * Set Z_IDLE_HEIGHT if the Z-Axis moves on its own when steppers are disabled. @@ -1221,7 +1232,7 @@ //#define Z_HOMING_HEIGHT 4 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ... // Be sure to have this much clearance over your Z_MAX_POS to prevent grinding. -//#define Z_AFTER_HOMING 10 // (mm) Height to move to after homing Z +#define Z_AFTER_HOMING 10 // (mm) Height to move to after homing Z // Direction of endstops when homing; 1=MAX, -1=MIN // :[-1,1] @@ -1232,8 +1243,8 @@ // @section machine // The size of the printable area -#define X_BED_SIZE 200 -#define Y_BED_SIZE 200 +#define X_BED_SIZE 300 +#define Y_BED_SIZE 300 // Travel limits (mm) after homing, corresponding to endstop positions. #define X_MIN_POS 0 @@ -1241,7 +1252,7 @@ #define Z_MIN_POS 0 #define X_MAX_POS X_BED_SIZE #define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 200 +#define Z_MAX_POS 400 /** * Software Endstops @@ -1285,12 +1296,12 @@ * RAMPS-based boards use SERVO3_PIN for the first runout sensor. * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. */ -//#define FILAMENT_RUNOUT_SENSOR +#define FILAMENT_RUNOUT_SENSOR #if ENABLED(FILAMENT_RUNOUT_SENSOR) #define FIL_RUNOUT_ENABLED_DEFAULT true // Enable the sensor on startup. Override with M412 followed by M500. #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. - #define FIL_RUNOUT_STATE LOW // Pin state indicating that filament is NOT present. + #define FIL_RUNOUT_STATE HIGH // Pin state indicating that filament is NOT present. #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. //#define WATCH_ALL_RUNOUT_SENSORS // Execute runout script on any triggering sensor, not only for the active extruder. @@ -1385,18 +1396,24 @@ * leveling in steps so you can manually adjust the Z height at each grid-point. * With an LCD controller the process is guided step-by-step. */ -//#define AUTO_BED_LEVELING_3POINT -//#define AUTO_BED_LEVELING_LINEAR -//#define AUTO_BED_LEVELING_BILINEAR -//#define AUTO_BED_LEVELING_UBL -//#define MESH_BED_LEVELING +#if EITHER(BLTOUCH, FIX_MOUNTED_PROBE) + //#define AUTO_BED_LEVELING_3POINT + //#define AUTO_BED_LEVELING_LINEAR + #define AUTO_BED_LEVELING_BILINEAR + //#define AUTO_BED_LEVELING_UBL +#endif +#if NONE(BLTOUCH, FIX_MOUNTED_PROBE) + #define MESH_BED_LEVELING +#endif /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable * leveling immediately after G28. */ -//#define RESTORE_LEVELING_AFTER_G28 +#if NONE(BLTOUCH, FIX_MOUNTED_PROBE) + #define RESTORE_LEVELING_AFTER_G28 +#endif //#define ENABLE_LEVELING_AFTER_G28 /** @@ -1405,7 +1422,7 @@ //#define PREHEAT_BEFORE_LEVELING #if ENABLED(PREHEAT_BEFORE_LEVELING) #define LEVELING_NOZZLE_TEMP 120 // (°C) Only applies to E0 at this time - #define LEVELING_BED_TEMP 50 + #define LEVELING_BED_TEMP 60 #endif /** @@ -1438,11 +1455,13 @@ /** * Enable the G26 Mesh Validation Pattern tool. */ - //#define G26_MESH_VALIDATION + #if EITHER(BLTOUCH, FIX_MOUNTED_PROBE) + #define G26_MESH_VALIDATION + #endif #if ENABLED(G26_MESH_VALIDATION) #define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle. #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for G26. - #define MESH_TEST_HOTEND_TEMP 205 // (°C) Default nozzle temperature for G26. + #define MESH_TEST_HOTEND_TEMP 200 // (°C) Default nozzle temperature for G26. #define MESH_TEST_BED_TEMP 60 // (°C) Default bed temperature for G26. #define G26_XY_FEEDRATE 20 // (mm/s) Feedrate for G26 XY moves. #define G26_XY_FEEDRATE_TRAVEL 100 // (mm/s) Feedrate for G26 XY travel moves. @@ -1454,7 +1473,7 @@ #if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR) // Set the number of grid points per dimension. - #define GRID_MAX_POINTS_X 3 + #define GRID_MAX_POINTS_X 5 #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X // Probe along the Y axis, advancing X after each column @@ -1464,7 +1483,7 @@ // Beyond the probed grid, continue the implied tilt? // Default is to maintain the height of the nearest edge. - //#define EXTRAPOLATE_BEYOND_GRID + #define EXTRAPOLATE_BEYOND_GRID // // Experimental Subdivision of the grid by Catmull-Rom method. @@ -1507,7 +1526,7 @@ //=========================================================================== #define MESH_INSET 10 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 3 // Don't use more than 7 points per axis, implementation limited. + #define GRID_MAX_POINTS_X 5 // Don't use more than 7 points per axis, implementation limited. #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS @@ -1518,7 +1537,7 @@ * Add a bed leveling sub-menu for ABL or MBL. * Include a guided procedure if manual probing is enabled. */ -//#define LCD_BED_LEVELING +#define LCD_BED_LEVELING #if ENABLED(LCD_BED_LEVELING) #define MESH_EDIT_Z_STEP 0.025 // (mm) Step size while manually probing Z axis. @@ -1587,7 +1606,10 @@ // - Move the Z probe (or nozzle) to a defined XY point before Z Homing. // - Prevent Z homing when the Z probe is outside bed area. // -//#define Z_SAFE_HOMING +// +#if EITHER(BLTOUCH, FIX_MOUNTED_PROBE) + #define Z_SAFE_HOMING +#endif #if ENABLED(Z_SAFE_HOMING) #define Z_SAFE_HOMING_X_POINT X_CENTER // X point for Z homing @@ -1672,7 +1694,7 @@ * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) */ -//#define EEPROM_SETTINGS // Persistent storage with M500 and M501 +#define EEPROM_SETTINGS // Persistent storage with M500 and M501 //#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. #define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load @@ -1706,14 +1728,14 @@ // Preheat Constants - Up to 5 are supported without changes // #define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 180 -#define PREHEAT_1_TEMP_BED 70 +#define PREHEAT_1_TEMP_HOTEND 200 +#define PREHEAT_1_TEMP_BED 60 #define PREHEAT_1_TEMP_CHAMBER 35 #define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 #define PREHEAT_2_LABEL "ABS" #define PREHEAT_2_TEMP_HOTEND 240 -#define PREHEAT_2_TEMP_BED 110 +#define PREHEAT_2_TEMP_BED 95 #define PREHEAT_2_TEMP_CHAMBER 35 #define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 @@ -1728,7 +1750,7 @@ * P1 Raise the nozzle always to Z-park height. * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. */ -//#define NOZZLE_PARK_FEATURE +#define NOZZLE_PARK_FEATURE #if ENABLED(NOZZLE_PARK_FEATURE) // Specify a park position as { X, Y, Z_raise } @@ -1845,7 +1867,7 @@ * * View the current statistics with M78. */ -//#define PRINTCOUNTER +#define PRINTCOUNTER #if ENABLED(PRINTCOUNTER) #define PRINTCOUNTER_SAVE_INTERVAL 60 // (minutes) EEPROM save interval during print #endif @@ -1936,7 +1958,7 @@ * SD Card support is disabled by default. If your controller has an SD slot, * you must uncomment the following option or it won't work. */ -//#define SDSUPPORT +#define SDSUPPORT /** * SD CARD: ENABLE CRC @@ -1983,7 +2005,7 @@ // // Set this option if CLOCKWISE causes values to DECREASE // -//#define REVERSE_ENCODER_DIRECTION +#define REVERSE_ENCODER_DIRECTION // // This option reverses the encoder direction for navigating LCD menus. @@ -2006,7 +2028,7 @@ // // Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. // -//#define INDIVIDUAL_AXIS_HOMING_MENU +#define INDIVIDUAL_AXIS_HOMING_MENU // // SPEAKER/BUZZER @@ -2195,7 +2217,7 @@ // RepRapDiscount FULL GRAPHIC Smart Controller // https://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller // -//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER +#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER // // K.3D Full Graphic Smart Controller @@ -2731,7 +2753,7 @@ * Set this manually if there are extra servos needing manual control. * Set to 0 to turn off servo support. */ -//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command +#define NUM_SERVOS 1 // Servo index starts with 0 for M280 command // (ms) Delay before the next move will start, to give the servo time to reach its target angle. // 300ms is a good value but you can try less delay. diff --git a/config/examples/Eryone/Thinker SE/Configuration_adv.h b/config/examples/Eryone/Thinker SE/Configuration_adv.h index 5335fa012a..a662ac1b61 100644 --- a/config/examples/Eryone/Thinker SE/Configuration_adv.h +++ b/config/examples/Eryone/Thinker SE/Configuration_adv.h @@ -1,6 +1,6 @@ /** * Marlin 3D Printer Firmware - * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * Copyright (c) 2021 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * * Based on Sprinter and grbl. * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Eryone/Thinker SE" + /** * Configuration_adv.h * @@ -437,7 +439,7 @@ * Hotend Idle Timeout * Prevent filament in the nozzle from charring and causing a critical jam. */ -//#define HOTEND_IDLE_TIMEOUT +#define HOTEND_IDLE_TIMEOUT // Disabled by default, just a safety measure that doesn't cause any harm #if ENABLED(HOTEND_IDLE_TIMEOUT) #define HOTEND_IDLE_TIMEOUT_SEC (5*60) // (seconds) Time without extruder movement to trigger protection #define HOTEND_IDLE_MIN_TRIGGER 180 // (°C) Minimum temperature to enable hotend protection @@ -540,7 +542,7 @@ * Multiple extruders can be assigned to the same pin in which case * the fan will turn on when any selected extruder is above the threshold. */ -#define E0_AUTO_FAN_PIN -1 +#define E0_AUTO_FAN_PIN 6 #define E1_AUTO_FAN_PIN -1 #define E2_AUTO_FAN_PIN -1 #define E3_AUTO_FAN_PIN -1 @@ -741,7 +743,7 @@ //#define HOMING_BACKOFF_POST_MM { 2, 2, 2 } // (mm) Backoff from endstops after homing -//#define QUICK_HOME // If G28 contains XY do a diagonal move first +#define QUICK_HOME // If G28 contains XY do a diagonal move first //#define HOME_Y_BEFORE_X // If G28 contains XY home Y before X //#define HOME_Z_FIRST // Home Z first. Requires a Z-MIN endstop (not a probe). //#define CODEPENDENT_XY_HOMING // If X/Y can't home without homing Y/X first @@ -1160,22 +1162,22 @@ // Add Probe Z Offset calibration to the Z Probe Offsets menu #if HAS_BED_PROBE - //#define PROBE_OFFSET_WIZARD + #define PROBE_OFFSET_WIZARD #if ENABLED(PROBE_OFFSET_WIZARD) // // Enable to init the Probe Z-Offset when starting the Wizard. // Use a height slightly above the estimated nozzle-to-probe Z offset. // For example, with an offset of -5, consider a starting height of -4. // - //#define PROBE_OFFSET_WIZARD_START_Z -4.0 + #define PROBE_OFFSET_WIZARD_START_Z -1.5 // Set a convenient position to do the calibration (probing point and nozzle/bed-distance) - //#define PROBE_OFFSET_WIZARD_XY_POS { X_CENTER, Y_CENTER } + #define PROBE_OFFSET_WIZARD_XY_POS { X_CENTER, Y_CENTER } #endif #endif // Include a page of printer information in the LCD Main Menu - //#define LCD_INFO_MENU + #define LCD_INFO_MENU #if ENABLED(LCD_INFO_MENU) //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages #endif @@ -1229,7 +1231,7 @@ #endif // Scroll a longer status message into view - //#define STATUS_MESSAGE_SCROLLING + #define STATUS_MESSAGE_SCROLLING // On the Info Screen, display XY with one decimal place when possible //#define LCD_DECIMAL_SMALL_XY @@ -1238,7 +1240,7 @@ //#define LCD_SET_PROGRESS_MANUALLY // Show the E position (filament used) during printing - //#define LCD_SHOW_E_TOTAL + #define LCD_SHOW_E_TOTAL #endif #if EITHER(SDSUPPORT, LCD_SET_PROGRESS_MANUALLY) && ANY(HAS_MARLINUI_U8GLIB, HAS_MARLINUI_HD44780, IS_TFTGLCD_PANEL, EXTENSIBLE_UI) @@ -1299,7 +1301,7 @@ //#define NO_SD_AUTOSTART // Remove auto#.g file support completely to save some Flash, SRAM //#define MENU_ADDAUTOSTART // Add a menu option to run auto#.g files - //#define BROWSE_MEDIA_ON_INSERT // Open the file browser when media is inserted + #define BROWSE_MEDIA_ON_INSERT // Open the file browser when media is inserted #define EVENT_GCODE_SD_ABORT "G28XY" // G-code to run on SD Abort Print (e.g., "G28XY" or "G27") @@ -1315,7 +1317,7 @@ * an option on the LCD screen to continue the print from the last-known * point in the file. */ - //#define POWER_LOSS_RECOVERY + #define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) //#define BACKUP_POWER_SUPPLY // Backup power / UPS to move the steppers on power loss @@ -1512,7 +1514,7 @@ */ #if HAS_MARLINUI_U8GLIB // Show SD percentage next to the progress bar - //#define DOGM_SD_PERCENT + #define DOGM_SD_PERCENT // Save many cycles by drawing a hollow frame or no frame on the Info Screen //#define XYZ_NO_FRAME @@ -1790,7 +1792,7 @@ * * Warning: Does not respect endstops! */ -//#define BABYSTEPPING +#define BABYSTEPPING #if ENABLED(BABYSTEPPING) //#define INTEGRATED_BABYSTEPPING // EXPERIMENTAL integration of babystepping into the Stepper ISR //#define BABYSTEP_WITHOUT_HOMING @@ -1798,7 +1800,11 @@ //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way //#define BABYSTEP_MILLIMETER_UNITS // Specify BABYSTEP_MULTIPLICATOR_(XY|Z) in mm instead of micro-steps - #define BABYSTEP_MULTIPLICATOR_Z 1 // (steps or mm) Steps or millimeter distance for each Z babystep + #ifdef BLTOUCH + #define BABYSTEP_MULTIPLICATOR_Z 0.5 // (steps or mm) Steps or millimeter distance for each Z babystep + #else + #define BABYSTEP_MULTIPLICATOR_Z 1 // (steps or mm) Steps or millimeter distance for each Z babystep + #endif #define BABYSTEP_MULTIPLICATOR_XY 1 // (steps or mm) Steps or millimeter distance for each XY babystep //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. @@ -1813,7 +1819,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 - //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping + #ifdef BLTOUCH + #define BABYSTEP_ZPROBE_OFFSET + #endif // Combine M851 Z and Babystepping #if ENABLED(BABYSTEP_ZPROBE_OFFSET) //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor @@ -2311,28 +2319,28 @@ * * Enable PARK_HEAD_ON_PAUSE to add the G-code M125 Pause and Park. */ -//#define ADVANCED_PAUSE_FEATURE +#define ADVANCED_PAUSE_FEATURE #if ENABLED(ADVANCED_PAUSE_FEATURE) #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. // This short retract is done immediately, before parking the nozzle. - #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast. - #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload. + #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 30 // (mm/s) Unload filament feedrate. This can be pretty fast. + #define FILAMENT_CHANGE_UNLOAD_ACCEL 16 // (mm/s^2) Lower acceleration may allow a faster feedrate. + #define FILAMENT_CHANGE_UNLOAD_LENGTH 450 // (mm) The length of filament for a complete unload. // For Bowden, the full length of the tube and nozzle. // For direct drive, the full length of the nozzle. // Set to 0 for manual unloading. #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE 6 // (mm/s) Slow move when starting load. #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 0 // (mm) Slow length, to allow time to insert material. // 0 to disable start loading and skip to fast load only - #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast. - #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle. + #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 10 // (mm/s) Load filament feedrate. This can be pretty fast. + #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 16 // (mm/s^2) Lower acceleration may allow a faster feedrate. + #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 100 // (mm) Load length of filament, from extruder gear to nozzle. // For Bowden, the full length of the tube and nozzle. // For direct drive, the full length of the nozzle. //#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted. - #define ADVANCED_PAUSE_PURGE_FEEDRATE 3 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate. - #define ADVANCED_PAUSE_PURGE_LENGTH 50 // (mm) Length to extrude after loading. + #define ADVANCED_PAUSE_PURGE_FEEDRATE 5 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate. + #define ADVANCED_PAUSE_PURGE_LENGTH 100 // (mm) Length to extrude after loading. // Set to 0 for manual extrusion. // Filament can be extruded repeatedly from the Filament Change menu // until extrusion is consistent, and to purge old filament. @@ -2340,7 +2348,7 @@ //#define ADVANCED_PAUSE_FANS_PAUSE // Turn off print-cooling fans while the machine is paused. // Filament Unload does a Retract, Delay, and Purge first: - #define FILAMENT_UNLOAD_PURGE_RETRACT 13 // (mm) Unload initial retract length. + #define FILAMENT_UNLOAD_PURGE_RETRACT 0 // (mm) Unload initial retract length. #define FILAMENT_UNLOAD_PURGE_DELAY 5000 // (ms) Delay for the filament to cool after retract. #define FILAMENT_UNLOAD_PURGE_LENGTH 8 // (mm) An unretract is done, then this length is purged. #define FILAMENT_UNLOAD_PURGE_FEEDRATE 25 // (mm/s) feedrate to purge before unload @@ -2349,11 +2357,11 @@ #define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed. #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change. - //#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. + #define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. //#define HOME_BEFORE_FILAMENT_CHANGE // If needed, home before parking for filament change - //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. - //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) + #define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. + #define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) #endif // @section tmc @@ -2493,7 +2501,7 @@ #define INTERPOLATE true #if AXIS_IS_TMC(X) - #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. + #define X_CURRENT 1000 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for sensorless homing #define X_MICROSTEPS 16 // 0..256 #define X_RSENSE 0.11 @@ -2511,7 +2519,7 @@ #endif #if AXIS_IS_TMC(Y) - #define Y_CURRENT 800 + #define Y_CURRENT 1000 #define Y_CURRENT_HOME Y_CURRENT #define Y_MICROSTEPS 16 #define Y_RSENSE 0.11 @@ -2529,7 +2537,7 @@ #endif #if AXIS_IS_TMC(Z) - #define Z_CURRENT 800 + #define Z_CURRENT 1100 #define Z_CURRENT_HOME Z_CURRENT #define Z_MICROSTEPS 16 #define Z_RSENSE 0.11 @@ -2565,7 +2573,7 @@ #endif #if AXIS_IS_TMC(E0) - #define E0_CURRENT 800 + #define E0_CURRENT 900 #define E0_MICROSTEPS 16 #define E0_RSENSE 0.11 #define E0_CHAIN_POS -1 @@ -4002,7 +4010,7 @@ // // M43 - display pin status, toggle pins, watch pins, watch endstops & toggle LED, test servo probe // -//#define PINS_DEBUGGING +#define PINS_DEBUGGING // Enable Marlin dev mode which adds some special commands //#define MARLIN_DEV_MODE diff --git a/config/examples/Eryone/Thinker V2/Configuration.h b/config/examples/Eryone/Thinker V2/Configuration.h index 78c2dc9160..64680cbde6 100644 --- a/config/examples/Eryone/Thinker V2/Configuration.h +++ b/config/examples/Eryone/Thinker V2/Configuration.h @@ -21,6 +21,10 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Eryone/Thinker V2" + +//#define THINKERV2_BLTOUCH // Enable for an installed BLTOUCH + /** * Configuration.h * @@ -134,11 +138,15 @@ // Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_RAMPS_14_EFB + #define MOTHERBOARD BOARD_RAMBO_THINKERV2 #endif // Name displayed in the LCD "Ready" message and Info menu -//#define CUSTOM_MACHINE_NAME "3D Printer" +#ifdef THINKERV2_BLTOUCH + #define CUSTOM_MACHINE_NAME "Thinker V2_BL" +#else + #define CUSTOM_MACHINE_NAME "Thinker V2" +#endif // Printer's unique ID, used by some programs to differentiate between machines. // Choose your own or use a service like https://www.uuidgenerator.net/version4 @@ -416,7 +424,7 @@ * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. */ -#define TEMP_SENSOR_0 1 +#define TEMP_SENSOR_0 13 #define TEMP_SENSOR_1 0 #define TEMP_SENSOR_2 0 #define TEMP_SENSOR_3 0 @@ -424,7 +432,7 @@ #define TEMP_SENSOR_5 0 #define TEMP_SENSOR_6 0 #define TEMP_SENSOR_7 0 -#define TEMP_SENSOR_BED 0 +#define TEMP_SENSOR_BED 13 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 #define TEMP_SENSOR_COOLER 0 @@ -558,8 +566,8 @@ // 120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) // from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) - #define DEFAULT_bedKp 10.00 - #define DEFAULT_bedKi .023 + #define DEFAULT_bedKp 100.00 + #define DEFAULT_bedKi 5.023 #define DEFAULT_bedKd 305.4 // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. @@ -634,7 +642,7 @@ * Note: For Bowden Extruders make this large enough to allow load/unload. */ #define PREVENT_LENGTHY_EXTRUDE -#define EXTRUDE_MAXLENGTH 200 +#define EXTRUDE_MAXLENGTH 600 //=========================================================================== //======================== Thermal Runaway Protection ======================= @@ -717,13 +725,13 @@ #endif // Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. +#define X_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Y_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Z_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. #define X_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. #define Y_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. #define Z_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_PROBE_ENDSTOP_INVERTING false // Set to true to invert the logic of the probe. +#define Z_MIN_PROBE_ENDSTOP_INVERTING true // Set to true to invert the logic of the probe. /** * Stepper Drivers @@ -743,15 +751,15 @@ * TMC5130, TMC5130_STANDALONE, TMC5160, TMC5160_STANDALONE * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'L6474', 'POWERSTEP01', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2160', 'TMC2160_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC2209', 'TMC2209_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE', 'TMC5160', 'TMC5160_STANDALONE'] */ -#define X_DRIVER_TYPE A4988 -#define Y_DRIVER_TYPE A4988 -#define Z_DRIVER_TYPE A4988 +//#define X_DRIVER_TYPE A4988 +//#define Y_DRIVER_TYPE A4988 +//#define Z_DRIVER_TYPE A4988 //#define X2_DRIVER_TYPE A4988 //#define Y2_DRIVER_TYPE A4988 //#define Z2_DRIVER_TYPE A4988 //#define Z3_DRIVER_TYPE A4988 //#define Z4_DRIVER_TYPE A4988 -#define E0_DRIVER_TYPE A4988 +//#define E0_DRIVER_TYPE A4988 //#define E1_DRIVER_TYPE A4988 //#define E2_DRIVER_TYPE A4988 //#define E3_DRIVER_TYPE A4988 @@ -806,14 +814,14 @@ * Override with M92 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 500 } +#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 93 } /** * Default Max Feed Rate (mm/s) * Override with M203 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 } +#define DEFAULT_MAX_FEEDRATE { 300, 300, 35, 25 } //#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 #if ENABLED(LIMITED_MAX_FR_EDITING) @@ -826,7 +834,7 @@ * Override with M201 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 } +#define DEFAULT_MAX_ACCELERATION { 1500, 1500, 150, 1500 } //#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 #if ENABLED(LIMITED_MAX_ACCEL_EDITING) @@ -841,9 +849,9 @@ * M204 R Retract Acceleration * M204 T Travel Acceleration */ -#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves +#define DEFAULT_ACCELERATION 1250 // X, Y, Z and E acceleration for printing moves +#define DEFAULT_RETRACT_ACCELERATION 1250 // E acceleration for retracts +#define DEFAULT_TRAVEL_ACCELERATION 1500 // X, Y, Z acceleration for travel (non printing) moves /** * Default Jerk limits (mm/s) @@ -853,7 +861,7 @@ * When changing speed and direction, if the difference is less than the * value set here, it may happen instantaneously. */ -//#define CLASSIC_JERK +#define CLASSIC_JERK #if ENABLED(CLASSIC_JERK) #define DEFAULT_XJERK 10.0 #define DEFAULT_YJERK 10.0 @@ -963,7 +971,9 @@ /** * The BLTouch probe uses a Hall effect sensor and emulates a servo. */ -//#define BLTOUCH +#ifdef THINKERV2_BLTOUCH + #define BLTOUCH +#endif /** * Touch-MI Probe by hotends.fr @@ -1055,7 +1065,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +#define NOZZLE_TO_PROBE_OFFSET { 40, 10, 0 } // Most probes should stay away from the edges of the bed, but // with NOZZLE_AS_PROBE this can be negative for a wider probing area. @@ -1106,7 +1116,7 @@ * A total of 2 does fast/slow probes with a weighted average. * A total of 3 or more adds more slow probes, taking the average. */ -//#define MULTIPLE_PROBING 2 +#define MULTIPLE_PROBING 2 //#define EXTRA_PROBING 1 /** @@ -1152,12 +1162,12 @@ */ //#define PROBING_HEATERS_OFF // Turn heaters off when probing #if ENABLED(PROBING_HEATERS_OFF) - //#define WAIT_FOR_BED_HEATER // Wait for bed to heat back up between probes (to improve accuracy) + #define WAIT_FOR_BED_HEATER // Wait for bed to heat back up between probes (to improve accuracy) //#define WAIT_FOR_HOTEND // Wait for hotend to heat back up between probes (to improve accuracy & prevent cold extrude) #endif -//#define PROBING_FANS_OFF // Turn fans off when probing +#define PROBING_FANS_OFF // Turn fans off when probing //#define PROBING_STEPPERS_OFF // Turn steppers off (unless needed to hold position) when probing -//#define DELAY_BEFORE_PROBING 200 // (ms) To prevent vibrations from triggering piezo sensors +#define DELAY_BEFORE_PROBING 200 // (ms) To prevent vibrations from triggering piezo sensors // Require minimum nozzle and/or bed temperature for probing //#define PREHEAT_BEFORE_PROBING @@ -1190,14 +1200,14 @@ // @section machine // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR false -#define INVERT_Y_DIR true +#define INVERT_X_DIR true +#define INVERT_Y_DIR false #define INVERT_Z_DIR false // @section extruder // For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR false +#define INVERT_E0_DIR true #define INVERT_E1_DIR false #define INVERT_E2_DIR false #define INVERT_E3_DIR false @@ -1232,8 +1242,8 @@ // @section machine // The size of the printable area -#define X_BED_SIZE 200 -#define Y_BED_SIZE 200 +#define X_BED_SIZE 300 +#define Y_BED_SIZE 300 // Travel limits (mm) after homing, corresponding to endstop positions. #define X_MIN_POS 0 @@ -1241,7 +1251,7 @@ #define Z_MIN_POS 0 #define X_MAX_POS X_BED_SIZE #define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 200 +#define Z_MAX_POS 400 /** * Software Endstops @@ -1290,7 +1300,7 @@ #define FIL_RUNOUT_ENABLED_DEFAULT true // Enable the sensor on startup. Override with M412 followed by M500. #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. - #define FIL_RUNOUT_STATE LOW // Pin state indicating that filament is NOT present. + #define FIL_RUNOUT_STATE HIGH // Pin state indicating that filament is NOT present. #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. //#define WATCH_ALL_RUNOUT_SENSORS // Execute runout script on any triggering sensor, not only for the active extruder. @@ -1387,16 +1397,22 @@ */ //#define AUTO_BED_LEVELING_3POINT //#define AUTO_BED_LEVELING_LINEAR -//#define AUTO_BED_LEVELING_BILINEAR +#if EITHER(BLTOUCH, FIX_MOUNTED_PROBE) + #define AUTO_BED_LEVELING_BILINEAR +#endif //#define AUTO_BED_LEVELING_UBL -//#define MESH_BED_LEVELING +#if DISABLED(AUTO_BED_LEVELING_BILINEAR) + #define MESH_BED_LEVELING +#endif /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable * leveling immediately after G28. */ -//#define RESTORE_LEVELING_AFTER_G28 +#if NONE(BLTOUCH, FIX_MOUNTED_PROBE) + #define RESTORE_LEVELING_AFTER_G28 +#endif //#define ENABLE_LEVELING_AFTER_G28 /** @@ -1438,7 +1454,9 @@ /** * Enable the G26 Mesh Validation Pattern tool. */ - //#define G26_MESH_VALIDATION + #if EITHER(BLTOUCH, FIX_MOUNTED_PROBE) + #define G26_MESH_VALIDATION + #endif #if ENABLED(G26_MESH_VALIDATION) #define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle. #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for G26. @@ -1454,7 +1472,7 @@ #if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR) // Set the number of grid points per dimension. - #define GRID_MAX_POINTS_X 3 + #define GRID_MAX_POINTS_X 5 #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X // Probe along the Y axis, advancing X after each column @@ -1507,7 +1525,7 @@ //=========================================================================== #define MESH_INSET 10 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 3 // Don't use more than 7 points per axis, implementation limited. + #define GRID_MAX_POINTS_X 5 // Don't use more than 7 points per axis, implementation limited. #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS @@ -1518,7 +1536,7 @@ * Add a bed leveling sub-menu for ABL or MBL. * Include a guided procedure if manual probing is enabled. */ -//#define LCD_BED_LEVELING +#define LCD_BED_LEVELING #if ENABLED(LCD_BED_LEVELING) #define MESH_EDIT_Z_STEP 0.025 // (mm) Step size while manually probing Z axis. @@ -1587,7 +1605,10 @@ // - Move the Z probe (or nozzle) to a defined XY point before Z Homing. // - Prevent Z homing when the Z probe is outside bed area. // -//#define Z_SAFE_HOMING +// +#if EITHER(BLTOUCH, FIX_MOUNTED_PROBE) + #define Z_SAFE_HOMING +#endif #if ENABLED(Z_SAFE_HOMING) #define Z_SAFE_HOMING_X_POINT X_CENTER // X point for Z homing @@ -1672,7 +1693,7 @@ * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) */ -//#define EEPROM_SETTINGS // Persistent storage with M500 and M501 +#define EEPROM_SETTINGS // Persistent storage with M500 and M501 //#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. #define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load @@ -1706,14 +1727,14 @@ // Preheat Constants - Up to 5 are supported without changes // #define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 180 -#define PREHEAT_1_TEMP_BED 70 +#define PREHEAT_1_TEMP_HOTEND 205 +#define PREHEAT_1_TEMP_BED 65 #define PREHEAT_1_TEMP_CHAMBER 35 #define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 #define PREHEAT_2_LABEL "ABS" #define PREHEAT_2_TEMP_HOTEND 240 -#define PREHEAT_2_TEMP_BED 110 +#define PREHEAT_2_TEMP_BED 95 #define PREHEAT_2_TEMP_CHAMBER 35 #define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 @@ -1728,7 +1749,7 @@ * P1 Raise the nozzle always to Z-park height. * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. */ -//#define NOZZLE_PARK_FEATURE +#define NOZZLE_PARK_FEATURE #if ENABLED(NOZZLE_PARK_FEATURE) // Specify a park position as { X, Y, Z_raise } @@ -1845,7 +1866,7 @@ * * View the current statistics with M78. */ -//#define PRINTCOUNTER +#define PRINTCOUNTER #if ENABLED(PRINTCOUNTER) #define PRINTCOUNTER_SAVE_INTERVAL 60 // (minutes) EEPROM save interval during print #endif @@ -1936,7 +1957,7 @@ * SD Card support is disabled by default. If your controller has an SD slot, * you must uncomment the following option or it won't work. */ -//#define SDSUPPORT +#define SDSUPPORT /** * SD CARD: ENABLE CRC @@ -1983,7 +2004,7 @@ // // Set this option if CLOCKWISE causes values to DECREASE // -//#define REVERSE_ENCODER_DIRECTION +#define REVERSE_ENCODER_DIRECTION // // This option reverses the encoder direction for navigating LCD menus. @@ -2006,7 +2027,7 @@ // // Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. // -//#define INDIVIDUAL_AXIS_HOMING_MENU +#define INDIVIDUAL_AXIS_HOMING_MENU // // SPEAKER/BUZZER @@ -2195,7 +2216,7 @@ // RepRapDiscount FULL GRAPHIC Smart Controller // https://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller // -//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER +#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER // // K.3D Full Graphic Smart Controller diff --git a/config/examples/Eryone/Thinker V2/Configuration_adv.h b/config/examples/Eryone/Thinker V2/Configuration_adv.h index 5335fa012a..d84891e1db 100644 --- a/config/examples/Eryone/Thinker V2/Configuration_adv.h +++ b/config/examples/Eryone/Thinker V2/Configuration_adv.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Eryone/Thinker V2" + /** * Configuration_adv.h * @@ -437,7 +439,7 @@ * Hotend Idle Timeout * Prevent filament in the nozzle from charring and causing a critical jam. */ -//#define HOTEND_IDLE_TIMEOUT +#define HOTEND_IDLE_TIMEOUT // Disabled by default, just a safety measure that doesn't cause any harm #if ENABLED(HOTEND_IDLE_TIMEOUT) #define HOTEND_IDLE_TIMEOUT_SEC (5*60) // (seconds) Time without extruder movement to trigger protection #define HOTEND_IDLE_MIN_TRIGGER 180 // (°C) Minimum temperature to enable hotend protection @@ -540,7 +542,7 @@ * Multiple extruders can be assigned to the same pin in which case * the fan will turn on when any selected extruder is above the threshold. */ -#define E0_AUTO_FAN_PIN -1 +#define E0_AUTO_FAN_PIN 6 #define E1_AUTO_FAN_PIN -1 #define E2_AUTO_FAN_PIN -1 #define E3_AUTO_FAN_PIN -1 @@ -1175,7 +1177,7 @@ #endif // Include a page of printer information in the LCD Main Menu - //#define LCD_INFO_MENU + #define LCD_INFO_MENU #if ENABLED(LCD_INFO_MENU) //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages #endif @@ -1229,7 +1231,7 @@ #endif // Scroll a longer status message into view - //#define STATUS_MESSAGE_SCROLLING + #define STATUS_MESSAGE_SCROLLING // On the Info Screen, display XY with one decimal place when possible //#define LCD_DECIMAL_SMALL_XY @@ -1238,7 +1240,7 @@ //#define LCD_SET_PROGRESS_MANUALLY // Show the E position (filament used) during printing - //#define LCD_SHOW_E_TOTAL + #define LCD_SHOW_E_TOTAL #endif #if EITHER(SDSUPPORT, LCD_SET_PROGRESS_MANUALLY) && ANY(HAS_MARLINUI_U8GLIB, HAS_MARLINUI_HD44780, IS_TFTGLCD_PANEL, EXTENSIBLE_UI) @@ -1315,7 +1317,7 @@ * an option on the LCD screen to continue the print from the last-known * point in the file. */ - //#define POWER_LOSS_RECOVERY + #define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) //#define BACKUP_POWER_SUPPLY // Backup power / UPS to move the steppers on power loss @@ -1512,7 +1514,7 @@ */ #if HAS_MARLINUI_U8GLIB // Show SD percentage next to the progress bar - //#define DOGM_SD_PERCENT + #define DOGM_SD_PERCENT // Save many cycles by drawing a hollow frame or no frame on the Info Screen //#define XYZ_NO_FRAME @@ -1790,7 +1792,7 @@ * * Warning: Does not respect endstops! */ -//#define BABYSTEPPING +#define BABYSTEPPING #if ENABLED(BABYSTEPPING) //#define INTEGRATED_BABYSTEPPING // EXPERIMENTAL integration of babystepping into the Stepper ISR //#define BABYSTEP_WITHOUT_HOMING @@ -1798,10 +1800,14 @@ //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way //#define BABYSTEP_MILLIMETER_UNITS // Specify BABYSTEP_MULTIPLICATOR_(XY|Z) in mm instead of micro-steps - #define BABYSTEP_MULTIPLICATOR_Z 1 // (steps or mm) Steps or millimeter distance for each Z babystep + #ifdef BLTOUCH + #define BABYSTEP_MULTIPLICATOR_Z 0.5 // (steps or mm) Steps or millimeter distance for each Z babystep + #else + #define BABYSTEP_MULTIPLICATOR_Z 1 // (steps or mm) Steps or millimeter distance for each Z babystep + #endif #define BABYSTEP_MULTIPLICATOR_XY 1 // (steps or mm) Steps or millimeter distance for each XY babystep - //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. + #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. // Note: Extra time may be added to mitigate controller latency. @@ -1813,7 +1819,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 - //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping + #ifdef BLTOUCH + #define BABYSTEP_ZPROBE_OFFSET + #endif // Combine M851 Z and Babystepping #if ENABLED(BABYSTEP_ZPROBE_OFFSET) //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor @@ -2311,28 +2319,28 @@ * * Enable PARK_HEAD_ON_PAUSE to add the G-code M125 Pause and Park. */ -//#define ADVANCED_PAUSE_FEATURE +#define ADVANCED_PAUSE_FEATURE #if ENABLED(ADVANCED_PAUSE_FEATURE) #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. // This short retract is done immediately, before parking the nozzle. - #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast. - #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload. + #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 30 // (mm/s) Unload filament feedrate. This can be pretty fast. + #define FILAMENT_CHANGE_UNLOAD_ACCEL 16 // (mm/s^2) Lower acceleration may allow a faster feedrate. + #define FILAMENT_CHANGE_UNLOAD_LENGTH 450 // (mm) The length of filament for a complete unload. // For Bowden, the full length of the tube and nozzle. // For direct drive, the full length of the nozzle. // Set to 0 for manual unloading. #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE 6 // (mm/s) Slow move when starting load. #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 0 // (mm) Slow length, to allow time to insert material. // 0 to disable start loading and skip to fast load only - #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast. - #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle. + #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 10 // (mm/s) Load filament feedrate. This can be pretty fast. + #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 16 // (mm/s^2) Lower acceleration may allow a faster feedrate. + #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 100 // (mm) Load length of filament, from extruder gear to nozzle. // For Bowden, the full length of the tube and nozzle. // For direct drive, the full length of the nozzle. //#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted. - #define ADVANCED_PAUSE_PURGE_FEEDRATE 3 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate. - #define ADVANCED_PAUSE_PURGE_LENGTH 50 // (mm) Length to extrude after loading. + #define ADVANCED_PAUSE_PURGE_FEEDRATE 5 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate. + #define ADVANCED_PAUSE_PURGE_LENGTH 100 // (mm) Length to extrude after loading. // Set to 0 for manual extrusion. // Filament can be extruded repeatedly from the Filament Change menu // until extrusion is consistent, and to purge old filament. @@ -2340,7 +2348,7 @@ //#define ADVANCED_PAUSE_FANS_PAUSE // Turn off print-cooling fans while the machine is paused. // Filament Unload does a Retract, Delay, and Purge first: - #define FILAMENT_UNLOAD_PURGE_RETRACT 13 // (mm) Unload initial retract length. + #define FILAMENT_UNLOAD_PURGE_RETRACT 0 // (mm) Unload initial retract length. #define FILAMENT_UNLOAD_PURGE_DELAY 5000 // (ms) Delay for the filament to cool after retract. #define FILAMENT_UNLOAD_PURGE_LENGTH 8 // (mm) An unretract is done, then this length is purged. #define FILAMENT_UNLOAD_PURGE_FEEDRATE 25 // (mm/s) feedrate to purge before unload @@ -2349,11 +2357,11 @@ #define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed. #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change. - //#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. + #define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. //#define HOME_BEFORE_FILAMENT_CHANGE // If needed, home before parking for filament change - //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. - //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) + #define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. + #define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) #endif // @section tmc @@ -2493,7 +2501,7 @@ #define INTERPOLATE true #if AXIS_IS_TMC(X) - #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. + #define X_CURRENT 1000 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for sensorless homing #define X_MICROSTEPS 16 // 0..256 #define X_RSENSE 0.11 @@ -2511,7 +2519,7 @@ #endif #if AXIS_IS_TMC(Y) - #define Y_CURRENT 800 + #define Y_CURRENT 1000 #define Y_CURRENT_HOME Y_CURRENT #define Y_MICROSTEPS 16 #define Y_RSENSE 0.11 @@ -2529,7 +2537,7 @@ #endif #if AXIS_IS_TMC(Z) - #define Z_CURRENT 800 + #define Z_CURRENT 1100 #define Z_CURRENT_HOME Z_CURRENT #define Z_MICROSTEPS 16 #define Z_RSENSE 0.11 @@ -2565,7 +2573,7 @@ #endif #if AXIS_IS_TMC(E0) - #define E0_CURRENT 800 + #define E0_CURRENT 900 #define E0_MICROSTEPS 16 #define E0_RSENSE 0.11 #define E0_CHAIN_POS -1 diff --git a/config/examples/FYSETC/AIO_II/Configuration.h b/config/examples/FYSETC/AIO_II/Configuration.h index 78c2dc9160..cf412ee774 100644 --- a/config/examples/FYSETC/AIO_II/Configuration.h +++ b/config/examples/FYSETC/AIO_II/Configuration.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "FYSETC/AIO_II" + /** * Configuration.h * @@ -102,7 +104,7 @@ * * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] */ -#define SERIAL_PORT 0 +#define SERIAL_PORT 1 // libmaple 0 for USB, 1 for serial /** * Select a secondary serial port on the board to use for communication with the host. @@ -127,14 +129,14 @@ * * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ -#define BAUDRATE 250000 +#define BAUDRATE 115200 // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH // Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_RAMPS_14_EFB + #define MOTHERBOARD BOARD_FYSETC_AIO_II #endif // Name displayed in the LCD "Ready" message and Info menu @@ -424,7 +426,7 @@ #define TEMP_SENSOR_5 0 #define TEMP_SENSOR_6 0 #define TEMP_SENSOR_7 0 -#define TEMP_SENSOR_BED 0 +#define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 #define TEMP_SENSOR_COOLER 0 @@ -510,16 +512,17 @@ //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) // Set/get with gcode: M301 E[extruder number, 0-2] + // Makerlab J-head #if ENABLED(PID_PARAMS_PER_HOTEND) // Specify between 1 and HOTENDS values per array. // If fewer than EXTRUDER values are provided, the last element will be repeated. - #define DEFAULT_Kp_LIST { 22.20, 22.20 } - #define DEFAULT_Ki_LIST { 1.08, 1.08 } - #define DEFAULT_Kd_LIST { 114.00, 114.00 } + #define DEFAULT_Kp_LIST { 21.73, 21.73 } + #define DEFAULT_Ki_LIST { 1.54, 1.54 } + #define DEFAULT_Kd_LIST { 76.55, 76.55 } #else - #define DEFAULT_Kp 22.20 - #define DEFAULT_Ki 1.08 - #define DEFAULT_Kd 114.00 + #define DEFAULT_Kp 21.73 + #define DEFAULT_Ki 1.54 + #define DEFAULT_Kd 76.55 #endif #endif // PIDTEMP @@ -717,9 +720,9 @@ #endif // Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. +#define X_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Y_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Z_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. #define X_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. #define Y_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. #define Z_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. @@ -806,7 +809,7 @@ * Override with M92 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 500 } +#define DEFAULT_AXIS_STEPS_PER_UNIT { 640, 640, 3200, 800 } /** * Default Max Feed Rate (mm/s) @@ -1168,10 +1171,10 @@ // For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1 // :{ 0:'Low', 1:'High' } -#define X_ENABLE_ON 0 -#define Y_ENABLE_ON 0 -#define Z_ENABLE_ON 0 -#define E_ENABLE_ON 0 // For all extruders +#define X_ENABLE_ON 1 +#define Y_ENABLE_ON 1 +#define Z_ENABLE_ON 1 +#define E_ENABLE_ON 1 // For all extruders // Disable axis steppers immediately when they're not being stepped. // WARNING: When motors turn off there is a chance of losing position accuracy! @@ -1190,14 +1193,14 @@ // @section machine // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR false +#define INVERT_X_DIR true #define INVERT_Y_DIR true #define INVERT_Z_DIR false // @section extruder // For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR false +#define INVERT_E0_DIR true #define INVERT_E1_DIR false #define INVERT_E2_DIR false #define INVERT_E3_DIR false @@ -1232,8 +1235,8 @@ // @section machine // The size of the printable area -#define X_BED_SIZE 200 -#define Y_BED_SIZE 200 +#define X_BED_SIZE 235 +#define Y_BED_SIZE 235 // Travel limits (mm) after homing, corresponding to endstop positions. #define X_MIN_POS 0 @@ -1241,7 +1244,7 @@ #define Z_MIN_POS 0 #define X_MAX_POS X_BED_SIZE #define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 200 +#define Z_MAX_POS 260 /** * Software Endstops @@ -1672,7 +1675,7 @@ * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) */ -//#define EEPROM_SETTINGS // Persistent storage with M500 and M501 +#define EEPROM_SETTINGS // Persistent storage with M500 and M501 //#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. #define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load @@ -1936,7 +1939,7 @@ * SD Card support is disabled by default. If your controller has an SD slot, * you must uncomment the following option or it won't work. */ -//#define SDSUPPORT +#define SDSUPPORT /** * SD CARD: ENABLE CRC @@ -2276,7 +2279,7 @@ // //#define FYSETC_MINI_12864_X_X // Type C/D/E/F. No tunable RGB Backlight by default //#define FYSETC_MINI_12864_1_2 // Type C/D/E/F. Simple RGB Backlight (always on) -//#define FYSETC_MINI_12864_2_0 // Type A/B. Discreet RGB Backlight +#define FYSETC_MINI_12864_2_0 // Type A/B. Discreet RGB Backlight //#define FYSETC_MINI_12864_2_1 // Type A/B. NeoPixel RGB Backlight //#define FYSETC_GENERIC_12864_1_1 // Larger display with basic ON/OFF backlight. @@ -2671,14 +2674,14 @@ * * LED Type. Enable only one of the following two options. */ -//#define RGB_LED +#define RGB_LED //#define RGBW_LED #if EITHER(RGB_LED, RGBW_LED) - //#define RGB_LED_R_PIN 34 - //#define RGB_LED_G_PIN 43 - //#define RGB_LED_B_PIN 35 - //#define RGB_LED_W_PIN -1 + #define RGB_LED_R_PIN PB0 + #define RGB_LED_G_PIN PB6 + #define RGB_LED_B_PIN PB7 + #define RGB_LED_W_PIN -1 #endif // Support for Adafruit NeoPixel LED driver diff --git a/config/examples/FYSETC/AIO_II/Configuration_adv.h b/config/examples/FYSETC/AIO_II/Configuration_adv.h index 5335fa012a..72bb5ba8f3 100644 --- a/config/examples/FYSETC/AIO_II/Configuration_adv.h +++ b/config/examples/FYSETC/AIO_II/Configuration_adv.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "FYSETC/AIO_II" + /** * Configuration_adv.h * @@ -258,7 +260,7 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 20 // Seconds + #define WATCH_TEMP_PERIOD 120 // Seconds #define WATCH_TEMP_INCREASE 2 // Degrees Celsius #endif @@ -867,7 +869,7 @@ // On a 300mm bed a 5% grade would give a misalignment of ~1.5cm #define G34_MAX_GRADE 5 // (%) Maximum incline that G34 will handle - #define Z_STEPPER_ALIGN_ITERATIONS 5 // Number of iterations to apply during alignment + #define Z_STEPPER_ALIGN_ITERATIONS 3 // Number of iterations to apply during alignment #define Z_STEPPER_ALIGN_ACC 0.02 // Stop iterating early if the accuracy is better than this #define RESTORE_LEVELING_AFTER_G34 // Restore leveling after G34 is done? // After G34, re-home Z (G28 Z) or just calculate it from the last probe heights? @@ -1190,7 +1192,7 @@ * LED Control Menu * Add LED Control to the LCD menu */ - //#define LED_CONTROL_MENU + #define LED_CONTROL_MENU #if ENABLED(LED_CONTROL_MENU) #define LED_COLOR_PRESETS // Enable the Preset Color menu option //#define NEO2_COLOR_PRESETS // Enable a second NeoPixel Preset Color menu option @@ -1200,7 +1202,7 @@ #define LED_USER_PRESET_BLUE 0 // User defined BLUE value #define LED_USER_PRESET_WHITE 255 // User defined WHITE value #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity - //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup + #define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup #endif #if ENABLED(NEO2_COLOR_PRESETS) #define NEO2_USER_PRESET_RED 255 // User defined RED value @@ -1368,9 +1370,9 @@ #define SDSORT_LIMIT 40 // Maximum number of sorted items (10-256). Costs 27 bytes each. #define FOLDER_SORTING -1 // -1=above 0=none 1=below #define SDSORT_GCODE false // Allow turning sorting on/off with LCD and M34 G-code. - #define SDSORT_USES_RAM false // Pre-allocate a static array for faster pre-sorting. + #define SDSORT_USES_RAM true // Pre-allocate a static array for faster pre-sorting. #define SDSORT_USES_STACK false // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.) - #define SDSORT_CACHE_NAMES false // Keep sorted items in RAM longer for speedy performance. Most expensive option. + #define SDSORT_CACHE_NAMES true // Keep sorted items in RAM longer for speedy performance. Most expensive option. #define SDSORT_DYNAMIC_RAM false // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use! #define SDSORT_CACHE_VFATS 2 // Maximum number of 13-byte VFAT entries to use for sorting. // Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM. @@ -2493,7 +2495,7 @@ #define INTERPOLATE true #if AXIS_IS_TMC(X) - #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. + #define X_CURRENT 700 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for sensorless homing #define X_MICROSTEPS 16 // 0..256 #define X_RSENSE 0.11 @@ -2511,7 +2513,7 @@ #endif #if AXIS_IS_TMC(Y) - #define Y_CURRENT 800 + #define Y_CURRENT 650 #define Y_CURRENT_HOME Y_CURRENT #define Y_MICROSTEPS 16 #define Y_RSENSE 0.11 @@ -2565,7 +2567,7 @@ #endif #if AXIS_IS_TMC(E0) - #define E0_CURRENT 800 + #define E0_CURRENT 650 #define E0_MICROSTEPS 16 #define E0_RSENSE 0.11 #define E0_CHAIN_POS -1 @@ -2670,15 +2672,15 @@ * Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers * on the same serial port, either here or in your board's pins file. */ - //#define X_SLAVE_ADDRESS 0 - //#define Y_SLAVE_ADDRESS 0 - //#define Z_SLAVE_ADDRESS 0 + #define X_SLAVE_ADDRESS 0 + #define Y_SLAVE_ADDRESS 1 + #define Z_SLAVE_ADDRESS 2 //#define X2_SLAVE_ADDRESS 0 //#define Y2_SLAVE_ADDRESS 0 //#define Z2_SLAVE_ADDRESS 0 //#define Z3_SLAVE_ADDRESS 0 //#define Z4_SLAVE_ADDRESS 0 - //#define E0_SLAVE_ADDRESS 0 + #define E0_SLAVE_ADDRESS 3 //#define E1_SLAVE_ADDRESS 0 //#define E2_SLAVE_ADDRESS 0 //#define E3_SLAVE_ADDRESS 0 @@ -2748,7 +2750,7 @@ * M912 - Clear stepper driver overtemperature pre-warn condition flag. * M122 - Report driver parameters (Requires TMC_DEBUG) */ - //#define MONITOR_DRIVER_STATUS + #define MONITOR_DRIVER_STATUS #if ENABLED(MONITOR_DRIVER_STATUS) #define CURRENT_STEP_DOWN 50 // [mA] diff --git a/config/examples/FYSETC/F6_13/Configuration.h b/config/examples/FYSETC/F6_13/Configuration.h index 78c2dc9160..94c71b334a 100644 --- a/config/examples/FYSETC/F6_13/Configuration.h +++ b/config/examples/FYSETC/F6_13/Configuration.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "FYSETC/F6_13" + /** * Configuration.h * @@ -127,14 +129,16 @@ * * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ -#define BAUDRATE 250000 +#define BAUDRATE 115200 // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH // Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_RAMPS_14_EFB + //#define MOTHERBOARD BOARD_RAMPS_14_EFB + //#define MOTHERBOARD BOARD_FYSETC_AIO_II + #define MOTHERBOARD BOARD_FYSETC_F6_13 #endif // Name displayed in the LCD "Ready" message and Info menu @@ -717,9 +721,9 @@ #endif // Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. +#define X_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Y_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Z_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. #define X_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. #define Y_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. #define Z_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. @@ -806,7 +810,7 @@ * Override with M92 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 500 } +#define DEFAULT_AXIS_STEPS_PER_UNIT { 1280, 1280, 6400, 1600 } /** * Default Max Feed Rate (mm/s) @@ -1168,10 +1172,10 @@ // For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1 // :{ 0:'Low', 1:'High' } -#define X_ENABLE_ON 0 -#define Y_ENABLE_ON 0 -#define Z_ENABLE_ON 0 -#define E_ENABLE_ON 0 // For all extruders +#define X_ENABLE_ON 1 +#define Y_ENABLE_ON 1 +#define Z_ENABLE_ON 1 +#define E_ENABLE_ON 1 // For all extruders // Disable axis steppers immediately when they're not being stepped. // WARNING: When motors turn off there is a chance of losing position accuracy! @@ -1191,8 +1195,8 @@ // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR false -#define INVERT_Y_DIR true -#define INVERT_Z_DIR false +#define INVERT_Y_DIR false +#define INVERT_Z_DIR true // @section extruder @@ -1728,7 +1732,7 @@ * P1 Raise the nozzle always to Z-park height. * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. */ -//#define NOZZLE_PARK_FEATURE +#define NOZZLE_PARK_FEATURE #if ENABLED(NOZZLE_PARK_FEATURE) // Specify a park position as { X, Y, Z_raise } @@ -1936,7 +1940,7 @@ * SD Card support is disabled by default. If your controller has an SD slot, * you must uncomment the following option or it won't work. */ -//#define SDSUPPORT +#define SDSUPPORT /** * SD CARD: ENABLE CRC @@ -2261,7 +2265,7 @@ // MKS MINI12864 with graphic controller and SD support // https://reprap.org/wiki/MKS_MINI_12864 // -//#define MKS_MINI_12864 +#define MKS_MINI_12864 // // MKS LCD12864A/B with graphic controller and SD support. Follows MKS_MINI_12864 pinout. @@ -2675,10 +2679,14 @@ //#define RGBW_LED #if EITHER(RGB_LED, RGBW_LED) + // fzl:change to below //#define RGB_LED_R_PIN 34 //#define RGB_LED_G_PIN 43 //#define RGB_LED_B_PIN 35 - //#define RGB_LED_W_PIN -1 + #define RGB_LED_R_PIN -1 // PB0 + #define RGB_LED_G_PIN PB6 + #define RGB_LED_B_PIN PB7 + #define RGB_LED_W_PIN -1 #endif // Support for Adafruit NeoPixel LED driver diff --git a/config/examples/FYSETC/F6_13/Configuration_adv.h b/config/examples/FYSETC/F6_13/Configuration_adv.h index 5335fa012a..b6c5bd8466 100644 --- a/config/examples/FYSETC/F6_13/Configuration_adv.h +++ b/config/examples/FYSETC/F6_13/Configuration_adv.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "FYSETC/F6_13" + /** * Configuration_adv.h * @@ -258,7 +260,7 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 20 // Seconds + #define WATCH_TEMP_PERIOD 120 // Seconds #define WATCH_TEMP_INCREASE 2 // Degrees Celsius #endif @@ -266,13 +268,13 @@ * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_BED_PERIOD 60 // Seconds #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds + #define WATCH_BED_TEMP_PERIOD 100 // Seconds #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius #endif @@ -867,7 +869,7 @@ // On a 300mm bed a 5% grade would give a misalignment of ~1.5cm #define G34_MAX_GRADE 5 // (%) Maximum incline that G34 will handle - #define Z_STEPPER_ALIGN_ITERATIONS 5 // Number of iterations to apply during alignment + #define Z_STEPPER_ALIGN_ITERATIONS 3 // Number of iterations to apply during alignment #define Z_STEPPER_ALIGN_ACC 0.02 // Stop iterating early if the accuracy is better than this #define RESTORE_LEVELING_AFTER_G34 // Restore leveling after G34 is done? // After G34, re-home Z (G28 Z) or just calculate it from the last probe heights? @@ -1278,7 +1280,7 @@ // The standard SD detect circuit reads LOW when media is inserted and HIGH when empty. // Enable this option and set to HIGH if your SD cards are incorrectly detected. - //#define SD_DETECT_STATE HIGH + #define SD_DETECT_STATE LOW //#define SD_IGNORE_AT_STARTUP // Don't mount the SD card when starting up //#define SDCARD_READONLY // Read-only SD card (to save over 2K of flash) @@ -1422,7 +1424,7 @@ * * [1] On AVR an interrupt-capable pin is best for UHS3 compatibility. */ - //#define USB_FLASH_DRIVE_SUPPORT + #define USB_FLASH_DRIVE_SUPPORT #if ENABLED(USB_FLASH_DRIVE_SUPPORT) /** * USB Host Shield Library @@ -2311,14 +2313,14 @@ * * Enable PARK_HEAD_ON_PAUSE to add the G-code M125 Pause and Park. */ -//#define ADVANCED_PAUSE_FEATURE +#define ADVANCED_PAUSE_FEATURE #if ENABLED(ADVANCED_PAUSE_FEATURE) #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. - #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. + #define PAUSE_PARK_RETRACT_LENGTH 4 // (mm) Initial retract. // This short retract is done immediately, before parking the nozzle. #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast. #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload. + #define FILAMENT_CHANGE_UNLOAD_LENGTH 0 // (mm) The length of filament for a complete unload. // For Bowden, the full length of the tube and nozzle. // For direct drive, the full length of the nozzle. // Set to 0 for manual unloading. diff --git a/config/examples/FYSETC/S6/Configuration.h b/config/examples/FYSETC/S6/Configuration.h index 78c2dc9160..038829ae3c 100644 --- a/config/examples/FYSETC/S6/Configuration.h +++ b/config/examples/FYSETC/S6/Configuration.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "FYSETC/S6" + /** * Configuration.h * @@ -102,7 +104,7 @@ * * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] */ -#define SERIAL_PORT 0 +#define SERIAL_PORT -1 /** * Select a secondary serial port on the board to use for communication with the host. @@ -127,14 +129,14 @@ * * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ -#define BAUDRATE 250000 +#define BAUDRATE 115200 // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH // Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_RAMPS_14_EFB + #define MOTHERBOARD BOARD_FYSETC_S6 #endif // Name displayed in the LCD "Ready" message and Info menu @@ -806,7 +808,7 @@ * Override with M92 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 500 } +#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 400 } /** * Default Max Feed Rate (mm/s) @@ -1672,7 +1674,7 @@ * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) */ -//#define EEPROM_SETTINGS // Persistent storage with M500 and M501 +#define EEPROM_SETTINGS // Persistent storage with M500 and M501 //#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. #define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load @@ -1936,7 +1938,7 @@ * SD Card support is disabled by default. If your controller has an SD slot, * you must uncomment the following option or it won't work. */ -//#define SDSUPPORT +#define SDSUPPORT /** * SD CARD: ENABLE CRC diff --git a/config/examples/FYSETC/S6/Configuration_adv.h b/config/examples/FYSETC/S6/Configuration_adv.h index 5335fa012a..a5b70eb80d 100644 --- a/config/examples/FYSETC/S6/Configuration_adv.h +++ b/config/examples/FYSETC/S6/Configuration_adv.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "FYSETC/S6" + /** * Configuration_adv.h * @@ -867,7 +869,7 @@ // On a 300mm bed a 5% grade would give a misalignment of ~1.5cm #define G34_MAX_GRADE 5 // (%) Maximum incline that G34 will handle - #define Z_STEPPER_ALIGN_ITERATIONS 5 // Number of iterations to apply during alignment + #define Z_STEPPER_ALIGN_ITERATIONS 3 // Number of iterations to apply during alignment #define Z_STEPPER_ALIGN_ACC 0.02 // Stop iterating early if the accuracy is better than this #define RESTORE_LEVELING_AFTER_G34 // Restore leveling after G34 is done? // After G34, re-home Z (G28 Z) or just calculate it from the last probe heights? diff --git a/config/examples/Felix/DUAL/Configuration.h b/config/examples/Felix/DUAL/Configuration.h index 78c2dc9160..6cb65ebba3 100644 --- a/config/examples/Felix/DUAL/Configuration.h +++ b/config/examples/Felix/DUAL/Configuration.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Felix/DUAL" + /** * Configuration.h * @@ -69,7 +71,7 @@ // @section info // Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes. +#define STRING_CONFIG_H_AUTHOR "(none, Felix/DUAL)" // Who made the changes. //#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) /** @@ -134,11 +136,11 @@ // Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_RAMPS_14_EFB + #define MOTHERBOARD BOARD_FELIX2 #endif // Name displayed in the LCD "Ready" message and Info menu -//#define CUSTOM_MACHINE_NAME "3D Printer" +#define CUSTOM_MACHINE_NAME "Felix Dual" // Printer's unique ID, used by some programs to differentiate between machines. // Choose your own or use a service like https://www.uuidgenerator.net/version4 @@ -148,7 +150,7 @@ // This defines the number of extruders // :[0, 1, 2, 3, 4, 5, 6, 7, 8] -#define EXTRUDERS 1 +#define EXTRUDERS 2 // Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc. #define DEFAULT_NOMINAL_FILAMENT_DIA 1.75 @@ -318,13 +320,13 @@ * Enable and connect the power supply to the PS_ON_PIN. * Specify whether the power supply is active HIGH or active LOW. */ -//#define PSU_CONTROL +#define PSU_CONTROL //#define PSU_NAME "Power Supply" #if ENABLED(PSU_CONTROL) #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + #define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power //#define PSU_POWERUP_GCODE "M355 S1" // G-code to run after power-on (e.g., case light on) @@ -417,14 +419,14 @@ * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. */ #define TEMP_SENSOR_0 1 -#define TEMP_SENSOR_1 0 +#define TEMP_SENSOR_1 1 #define TEMP_SENSOR_2 0 #define TEMP_SENSOR_3 0 #define TEMP_SENSOR_4 0 #define TEMP_SENSOR_5 0 #define TEMP_SENSOR_6 0 #define TEMP_SENSOR_7 0 -#define TEMP_SENSOR_BED 0 +#define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 #define TEMP_SENSOR_COOLER 0 @@ -444,11 +446,11 @@ //#define TEMP_SENSOR_1_AS_REDUNDANT #define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10 -#define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 +#define TEMP_RESIDENCY_TIME 15 // (seconds) Time to wait for hotend to "settle" in M109 #define TEMP_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer #define TEMP_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target -#define TEMP_BED_RESIDENCY_TIME 10 // (seconds) Time to wait for bed to "settle" in M190 +#define TEMP_BED_RESIDENCY_TIME 0 // (seconds) Time to wait for bed to "settle" in M190 #define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer #define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target @@ -510,16 +512,17 @@ //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) // Set/get with gcode: M301 E[extruder number, 0-2] + // Felix 2.0+ electronics with v4 Hotend #if ENABLED(PID_PARAMS_PER_HOTEND) // Specify between 1 and HOTENDS values per array. // If fewer than EXTRUDER values are provided, the last element will be repeated. - #define DEFAULT_Kp_LIST { 22.20, 22.20 } - #define DEFAULT_Ki_LIST { 1.08, 1.08 } - #define DEFAULT_Kd_LIST { 114.00, 114.00 } + #define DEFAULT_Kp_LIST { 12.00, 12.00 } + #define DEFAULT_Ki_LIST { 0.84, 0.84 } + #define DEFAULT_Kd_LIST { 85.00, 85.00 } #else - #define DEFAULT_Kp 22.20 - #define DEFAULT_Ki 1.08 - #define DEFAULT_Kd 114.00 + #define DEFAULT_Kp 12.00 + #define DEFAULT_Ki 0.84 + #define DEFAULT_Kd 85.00 #endif #endif // PIDTEMP @@ -540,7 +543,7 @@ * heater. If your configuration is significantly different than this and you don't understand * the issues involved, don't use bed PID until someone else verifies that your hardware works. */ -//#define PIDTEMPBED +#define PIDTEMPBED //#define BED_LIMIT_SWITCHING @@ -556,11 +559,10 @@ //#define MIN_BED_POWER 0 //#define PID_BED_DEBUG // Sends debug data to the serial port. - // 120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - // from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) - #define DEFAULT_bedKp 10.00 - #define DEFAULT_bedKi .023 - #define DEFAULT_bedKd 305.4 + // Felix Foil Heater + #define DEFAULT_bedKp 103.37 + #define DEFAULT_bedKi 2.79 + #define DEFAULT_bedKd 956.94 // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. #endif // PIDTEMPBED @@ -720,9 +722,9 @@ #define X_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. #define Y_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. #define Z_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define X_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. +#define X_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Y_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Z_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. #define Z_MIN_PROBE_ENDSTOP_INVERTING false // Set to true to invert the logic of the probe. /** @@ -752,7 +754,7 @@ //#define Z3_DRIVER_TYPE A4988 //#define Z4_DRIVER_TYPE A4988 #define E0_DRIVER_TYPE A4988 -//#define E1_DRIVER_TYPE A4988 +#define E1_DRIVER_TYPE A4988 //#define E2_DRIVER_TYPE A4988 //#define E3_DRIVER_TYPE A4988 //#define E4_DRIVER_TYPE A4988 @@ -786,6 +788,7 @@ //============================================================================= // @section motion +// default steps per unit for Felix 2.0/3.0: 0.00249mm x/y rounding error with 3mm pitch HTD belt and 14 tooth pulleys. 0 Z error. /** * Default Settings * @@ -806,14 +809,14 @@ * Override with M92 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 500 } +#define DEFAULT_AXIS_STEPS_PER_UNIT { 76.190476, 76.190476, 1600, 164 } /** * Default Max Feed Rate (mm/s) * Override with M203 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 } +#define DEFAULT_MAX_FEEDRATE { 500, 500, 5, 25 } //#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 #if ENABLED(LIMITED_MAX_FR_EDITING) @@ -826,7 +829,7 @@ * Override with M201 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 } +#define DEFAULT_MAX_ACCELERATION { 5000, 5000, 100, 80000 } //#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 #if ENABLED(LIMITED_MAX_ACCEL_EDITING) @@ -841,8 +844,8 @@ * M204 R Retract Acceleration * M204 T Travel Acceleration */ -#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts +#define DEFAULT_ACCELERATION 1750 // X, Y, Z and E max acceleration for printing moves +#define DEFAULT_RETRACT_ACCELERATION 5000 // E acceleration for retracts #define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves /** @@ -877,7 +880,7 @@ * https://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html */ #if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.013 // (mm) Distance from real junction edge + #define JUNCTION_DEVIATION_MM 0.023 // (mm) Distance from real junction edge #define JD_HANDLE_SMALL_SEGMENTS // Use curvature estimation instead of just the junction angle // for small segments (< 1mm) with large junction angles (> 135°). #endif @@ -1055,7 +1058,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +#define NOZZLE_TO_PROBE_OFFSET { -25, -29, -12.35 } // Most probes should stay away from the edges of the bed, but // with NOZZLE_AS_PROBE this can be negative for a wider probing area. @@ -1123,7 +1126,7 @@ * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. */ -#define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow +#define Z_CLEARANCE_DEPLOY_PROBE 15 // Z Clearance for Deploy/Stow #define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points #define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes //#define Z_AFTER_PROBING 5 // Z position after probing is done @@ -1190,15 +1193,15 @@ // @section machine // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR false +#define INVERT_X_DIR true #define INVERT_Y_DIR true -#define INVERT_Z_DIR false +#define INVERT_Z_DIR true // @section extruder // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR false -#define INVERT_E1_DIR false +#define INVERT_E1_DIR true #define INVERT_E2_DIR false #define INVERT_E3_DIR false #define INVERT_E4_DIR false @@ -1232,8 +1235,8 @@ // @section machine // The size of the printable area -#define X_BED_SIZE 200 -#define Y_BED_SIZE 200 +#define X_BED_SIZE 255 +#define Y_BED_SIZE 205 // Travel limits (mm) after homing, corresponding to endstop positions. #define X_MIN_POS 0 @@ -1241,7 +1244,7 @@ #define Z_MIN_POS 0 #define X_MAX_POS X_BED_SIZE #define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 200 +#define Z_MAX_POS 235 /** * Software Endstops @@ -1709,13 +1712,13 @@ #define PREHEAT_1_TEMP_HOTEND 180 #define PREHEAT_1_TEMP_BED 70 #define PREHEAT_1_TEMP_CHAMBER 35 -#define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 +#define PREHEAT_1_FAN_SPEED 255 // Value from 0 to 255 #define PREHEAT_2_LABEL "ABS" #define PREHEAT_2_TEMP_HOTEND 240 -#define PREHEAT_2_TEMP_BED 110 +#define PREHEAT_2_TEMP_BED 100 #define PREHEAT_2_TEMP_CHAMBER 35 -#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 +#define PREHEAT_2_FAN_SPEED 255 // Value from 0 to 255 /** * Nozzle Park @@ -2613,7 +2616,7 @@ //#define NUM_M106_FANS 1 // Increase the FAN PWM frequency. Removes the PWM noise but increases heating in the FET/Arduino -//#define FAST_PWM_FAN +#define FAST_PWM_FAN // Use software PWM to drive the fan, as for the heaters. This uses a very low frequency // which is not as annoying as with the hardware PWM. On the other hand, if this frequency diff --git a/config/examples/Felix/DUAL/Configuration_adv.h b/config/examples/Felix/DUAL/Configuration_adv.h index 5335fa012a..284fdc35c4 100644 --- a/config/examples/Felix/DUAL/Configuration_adv.h +++ b/config/examples/Felix/DUAL/Configuration_adv.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Felix/DUAL" + /** * Configuration_adv.h * @@ -736,7 +738,7 @@ //#define SENSORLESS_BACKOFF_MM { 2, 2 } // (mm) Backoff from endstops before sensorless homing -#define HOMING_BUMP_MM { 5, 5, 2 } // (mm) Backoff from endstops after first bump +#define HOMING_BUMP_MM { 5, 5, 3 } // (mm) Backoff from endstops after first bump #define HOMING_BUMP_DIVISOR { 2, 2, 4 } // Re-Bump Speed Divisor (Divides the Homing Feedrate) //#define HOMING_BACKOFF_POST_MM { 2, 2, 2 } // (mm) Backoff from endstops after homing @@ -867,7 +869,7 @@ // On a 300mm bed a 5% grade would give a misalignment of ~1.5cm #define G34_MAX_GRADE 5 // (%) Maximum incline that G34 will handle - #define Z_STEPPER_ALIGN_ITERATIONS 5 // Number of iterations to apply during alignment + #define Z_STEPPER_ALIGN_ITERATIONS 3 // Number of iterations to apply during alignment #define Z_STEPPER_ALIGN_ACC 0.02 // Stop iterating early if the accuracy is better than this #define RESTORE_LEVELING_AFTER_G34 // Restore leveling after G34 is done? // After G34, re-home Z (G28 Z) or just calculate it from the last probe heights? @@ -925,7 +927,7 @@ * Set DISABLE_INACTIVE_? 'true' to shut down axis steppers after an idle period. * The Deactive Time can be overridden with M18 and M84. Set to 0 for No Timeout. */ -#define DEFAULT_STEPPER_DEACTIVE_TIME 120 +#define DEFAULT_STEPPER_DEACTIVE_TIME 60 #define DISABLE_INACTIVE_X true #define DISABLE_INACTIVE_Y true #define DISABLE_INACTIVE_Z true // Set 'false' if the nozzle could fall onto your printed part! @@ -3562,12 +3564,12 @@ #define MAIN_MENU_ITEM_2_GCODE "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND) //#define MAIN_MENU_ITEM_2_CONFIRM - //#define MAIN_MENU_ITEM_3_DESC "Preheat for " PREHEAT_2_LABEL - //#define MAIN_MENU_ITEM_3_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) + #define MAIN_MENU_ITEM_3_DESC "Preheat for " PREHEAT_2_LABEL + #define MAIN_MENU_ITEM_3_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) //#define MAIN_MENU_ITEM_3_CONFIRM - //#define MAIN_MENU_ITEM_4_DESC "Heat Bed/Home/Level" - //#define MAIN_MENU_ITEM_4_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29" + #define MAIN_MENU_ITEM_4_DESC "Heat Bed/Home/Level" + #define MAIN_MENU_ITEM_4_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29" //#define MAIN_MENU_ITEM_4_CONFIRM //#define MAIN_MENU_ITEM_5_DESC "Home & Info" diff --git a/config/examples/Felix/Single/Configuration.h b/config/examples/Felix/Single/Configuration.h index 78c2dc9160..c6d59474c3 100644 --- a/config/examples/Felix/Single/Configuration.h +++ b/config/examples/Felix/Single/Configuration.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Felix/Single" + /** * Configuration.h * @@ -69,7 +71,7 @@ // @section info // Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes. +#define STRING_CONFIG_H_AUTHOR "(none, Felix)" // Who made the changes. //#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) /** @@ -134,11 +136,11 @@ // Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_RAMPS_14_EFB + #define MOTHERBOARD BOARD_FELIX2 #endif // Name displayed in the LCD "Ready" message and Info menu -//#define CUSTOM_MACHINE_NAME "3D Printer" +#define CUSTOM_MACHINE_NAME "Felix" // Printer's unique ID, used by some programs to differentiate between machines. // Choose your own or use a service like https://www.uuidgenerator.net/version4 @@ -318,13 +320,13 @@ * Enable and connect the power supply to the PS_ON_PIN. * Specify whether the power supply is active HIGH or active LOW. */ -//#define PSU_CONTROL +#define PSU_CONTROL //#define PSU_NAME "Power Supply" #if ENABLED(PSU_CONTROL) #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + #define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power //#define PSU_POWERUP_GCODE "M355 S1" // G-code to run after power-on (e.g., case light on) @@ -424,7 +426,7 @@ #define TEMP_SENSOR_5 0 #define TEMP_SENSOR_6 0 #define TEMP_SENSOR_7 0 -#define TEMP_SENSOR_BED 0 +#define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 #define TEMP_SENSOR_COOLER 0 @@ -444,11 +446,11 @@ //#define TEMP_SENSOR_1_AS_REDUNDANT #define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10 -#define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 +#define TEMP_RESIDENCY_TIME 15 // (seconds) Time to wait for hotend to "settle" in M109 #define TEMP_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer #define TEMP_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target -#define TEMP_BED_RESIDENCY_TIME 10 // (seconds) Time to wait for bed to "settle" in M190 +#define TEMP_BED_RESIDENCY_TIME 0 // (seconds) Time to wait for bed to "settle" in M190 #define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer #define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target @@ -510,16 +512,17 @@ //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) // Set/get with gcode: M301 E[extruder number, 0-2] + // Felix 2.0+ electronics with v4 Hotend #if ENABLED(PID_PARAMS_PER_HOTEND) // Specify between 1 and HOTENDS values per array. // If fewer than EXTRUDER values are provided, the last element will be repeated. - #define DEFAULT_Kp_LIST { 22.20, 22.20 } - #define DEFAULT_Ki_LIST { 1.08, 1.08 } - #define DEFAULT_Kd_LIST { 114.00, 114.00 } + #define DEFAULT_Kp_LIST { 12.00, 12.00 } + #define DEFAULT_Ki_LIST { 0.84, 0.84 } + #define DEFAULT_Kd_LIST { 85.00, 85.00 } #else - #define DEFAULT_Kp 22.20 - #define DEFAULT_Ki 1.08 - #define DEFAULT_Kd 114.00 + #define DEFAULT_Kp 12.00 + #define DEFAULT_Ki 0.84 + #define DEFAULT_Kd 85.00 #endif #endif // PIDTEMP @@ -540,7 +543,7 @@ * heater. If your configuration is significantly different than this and you don't understand * the issues involved, don't use bed PID until someone else verifies that your hardware works. */ -//#define PIDTEMPBED +#define PIDTEMPBED //#define BED_LIMIT_SWITCHING @@ -556,11 +559,10 @@ //#define MIN_BED_POWER 0 //#define PID_BED_DEBUG // Sends debug data to the serial port. - // 120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - // from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) - #define DEFAULT_bedKp 10.00 - #define DEFAULT_bedKi .023 - #define DEFAULT_bedKd 305.4 + // Felix Foil Heater + #define DEFAULT_bedKp 103.37 + #define DEFAULT_bedKi 2.79 + #define DEFAULT_bedKd 956.94 // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. #endif // PIDTEMPBED @@ -720,9 +722,9 @@ #define X_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. #define Y_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. #define Z_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define X_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. +#define X_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Y_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Z_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. #define Z_MIN_PROBE_ENDSTOP_INVERTING false // Set to true to invert the logic of the probe. /** @@ -786,6 +788,7 @@ //============================================================================= // @section motion +// default steps per unit for Felix 2.0/3.0: 0.00249mm x/y rounding error with 3mm pitch HTD belt and 14 tooth pulleys. 0 Z error. /** * Default Settings * @@ -806,14 +809,14 @@ * Override with M92 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 500 } +#define DEFAULT_AXIS_STEPS_PER_UNIT { 76.190476, 76.190476, 1600, 164 } /** * Default Max Feed Rate (mm/s) * Override with M203 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 } +#define DEFAULT_MAX_FEEDRATE { 500, 500, 5, 25 } //#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 #if ENABLED(LIMITED_MAX_FR_EDITING) @@ -826,7 +829,7 @@ * Override with M201 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 } +#define DEFAULT_MAX_ACCELERATION { 5000, 5000, 100, 80000 } //#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 #if ENABLED(LIMITED_MAX_ACCEL_EDITING) @@ -841,8 +844,8 @@ * M204 R Retract Acceleration * M204 T Travel Acceleration */ -#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts +#define DEFAULT_ACCELERATION 1750 // X, Y, Z and E max acceleration for printing moves +#define DEFAULT_RETRACT_ACCELERATION 5000 // E acceleration for retracts #define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves /** @@ -877,7 +880,7 @@ * https://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html */ #if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.013 // (mm) Distance from real junction edge + #define JUNCTION_DEVIATION_MM 0.023 // (mm) Distance from real junction edge #define JD_HANDLE_SMALL_SEGMENTS // Use curvature estimation instead of just the junction angle // for small segments (< 1mm) with large junction angles (> 135°). #endif @@ -1055,7 +1058,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +#define NOZZLE_TO_PROBE_OFFSET { -25, -29, -12.35 } // Most probes should stay away from the edges of the bed, but // with NOZZLE_AS_PROBE this can be negative for a wider probing area. @@ -1123,7 +1126,7 @@ * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. */ -#define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow +#define Z_CLEARANCE_DEPLOY_PROBE 15 // Z Clearance for Deploy/Stow #define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points #define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes //#define Z_AFTER_PROBING 5 // Z position after probing is done @@ -1190,9 +1193,9 @@ // @section machine // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR false +#define INVERT_X_DIR true #define INVERT_Y_DIR true -#define INVERT_Z_DIR false +#define INVERT_Z_DIR true // @section extruder @@ -1232,8 +1235,8 @@ // @section machine // The size of the printable area -#define X_BED_SIZE 200 -#define Y_BED_SIZE 200 +#define X_BED_SIZE 255 +#define Y_BED_SIZE 205 // Travel limits (mm) after homing, corresponding to endstop positions. #define X_MIN_POS 0 @@ -1241,7 +1244,7 @@ #define Z_MIN_POS 0 #define X_MAX_POS X_BED_SIZE #define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 200 +#define Z_MAX_POS 235 /** * Software Endstops @@ -1709,13 +1712,13 @@ #define PREHEAT_1_TEMP_HOTEND 180 #define PREHEAT_1_TEMP_BED 70 #define PREHEAT_1_TEMP_CHAMBER 35 -#define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 +#define PREHEAT_1_FAN_SPEED 255 // Value from 0 to 255 #define PREHEAT_2_LABEL "ABS" #define PREHEAT_2_TEMP_HOTEND 240 -#define PREHEAT_2_TEMP_BED 110 +#define PREHEAT_2_TEMP_BED 100 #define PREHEAT_2_TEMP_CHAMBER 35 -#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 +#define PREHEAT_2_FAN_SPEED 255 // Value from 0 to 255 /** * Nozzle Park @@ -2613,7 +2616,7 @@ //#define NUM_M106_FANS 1 // Increase the FAN PWM frequency. Removes the PWM noise but increases heating in the FET/Arduino -//#define FAST_PWM_FAN +#define FAST_PWM_FAN // Use software PWM to drive the fan, as for the heaters. This uses a very low frequency // which is not as annoying as with the hardware PWM. On the other hand, if this frequency diff --git a/config/examples/Felix/Single/Configuration_adv.h b/config/examples/Felix/Single/Configuration_adv.h index 5335fa012a..fd91a3244b 100644 --- a/config/examples/Felix/Single/Configuration_adv.h +++ b/config/examples/Felix/Single/Configuration_adv.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Felix/Single" + /** * Configuration_adv.h * @@ -736,7 +738,7 @@ //#define SENSORLESS_BACKOFF_MM { 2, 2 } // (mm) Backoff from endstops before sensorless homing -#define HOMING_BUMP_MM { 5, 5, 2 } // (mm) Backoff from endstops after first bump +#define HOMING_BUMP_MM { 5, 5, 3 } // (mm) Backoff from endstops after first bump #define HOMING_BUMP_DIVISOR { 2, 2, 4 } // Re-Bump Speed Divisor (Divides the Homing Feedrate) //#define HOMING_BACKOFF_POST_MM { 2, 2, 2 } // (mm) Backoff from endstops after homing @@ -867,7 +869,7 @@ // On a 300mm bed a 5% grade would give a misalignment of ~1.5cm #define G34_MAX_GRADE 5 // (%) Maximum incline that G34 will handle - #define Z_STEPPER_ALIGN_ITERATIONS 5 // Number of iterations to apply during alignment + #define Z_STEPPER_ALIGN_ITERATIONS 3 // Number of iterations to apply during alignment #define Z_STEPPER_ALIGN_ACC 0.02 // Stop iterating early if the accuracy is better than this #define RESTORE_LEVELING_AFTER_G34 // Restore leveling after G34 is done? // After G34, re-home Z (G28 Z) or just calculate it from the last probe heights? @@ -925,7 +927,7 @@ * Set DISABLE_INACTIVE_? 'true' to shut down axis steppers after an idle period. * The Deactive Time can be overridden with M18 and M84. Set to 0 for No Timeout. */ -#define DEFAULT_STEPPER_DEACTIVE_TIME 120 +#define DEFAULT_STEPPER_DEACTIVE_TIME 60 #define DISABLE_INACTIVE_X true #define DISABLE_INACTIVE_Y true #define DISABLE_INACTIVE_Z true // Set 'false' if the nozzle could fall onto your printed part! @@ -3562,12 +3564,12 @@ #define MAIN_MENU_ITEM_2_GCODE "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND) //#define MAIN_MENU_ITEM_2_CONFIRM - //#define MAIN_MENU_ITEM_3_DESC "Preheat for " PREHEAT_2_LABEL - //#define MAIN_MENU_ITEM_3_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) + #define MAIN_MENU_ITEM_3_DESC "Preheat for " PREHEAT_2_LABEL + #define MAIN_MENU_ITEM_3_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) //#define MAIN_MENU_ITEM_3_CONFIRM - //#define MAIN_MENU_ITEM_4_DESC "Heat Bed/Home/Level" - //#define MAIN_MENU_ITEM_4_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29" + #define MAIN_MENU_ITEM_4_DESC "Heat Bed/Home/Level" + #define MAIN_MENU_ITEM_4_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29" //#define MAIN_MENU_ITEM_4_CONFIRM //#define MAIN_MENU_ITEM_5_DESC "Home & Info" diff --git a/config/examples/FlashForge/Creator 2X/Configuration.h b/config/examples/FlashForge/Creator 2X/Configuration.h index 78c2dc9160..0b662c1bfb 100644 --- a/config/examples/FlashForge/Creator 2X/Configuration.h +++ b/config/examples/FlashForge/Creator 2X/Configuration.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "FlashForge/Creator 2X" + /** * Configuration.h * @@ -69,7 +71,7 @@ // @section info // Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes. +#define STRING_CONFIG_H_AUTHOR "MakerHouse" // Who made the changes. //#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) /** @@ -134,11 +136,11 @@ // Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_RAMPS_14_EFB + #define MOTHERBOARD BOARD_MIGHTYBOARD_REVE #endif // Name displayed in the LCD "Ready" message and Info menu -//#define CUSTOM_MACHINE_NAME "3D Printer" +#define CUSTOM_MACHINE_NAME "CreatorPro 2x" // Printer's unique ID, used by some programs to differentiate between machines. // Choose your own or use a service like https://www.uuidgenerator.net/version4 @@ -148,7 +150,7 @@ // This defines the number of extruders // :[0, 1, 2, 3, 4, 5, 6, 7, 8] -#define EXTRUDERS 1 +#define EXTRUDERS 2 // Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc. #define DEFAULT_NOMINAL_FILAMENT_DIA 1.75 @@ -306,8 +308,8 @@ // Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing). // The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder). // For the other hotends it is their distance from the extruder 0 hotend. -//#define HOTEND_OFFSET_X { 0.0, 20.00 } // (mm) relative X-offset for each nozzle -//#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle +#define HOTEND_OFFSET_X { 0.0, -34.00 } // (mm) relative X-offset for each nozzle +//#define HOTEND_OFFSET_Y { 0.0, 0.00 } // (mm) relative Y-offset for each nozzle //#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle // @section machine @@ -416,15 +418,15 @@ * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. */ -#define TEMP_SENSOR_0 1 -#define TEMP_SENSOR_1 0 +#define TEMP_SENSOR_0 -2 +#define TEMP_SENSOR_1 -2 #define TEMP_SENSOR_2 0 #define TEMP_SENSOR_3 0 #define TEMP_SENSOR_4 0 #define TEMP_SENSOR_5 0 #define TEMP_SENSOR_6 0 #define TEMP_SENSOR_7 0 -#define TEMP_SENSOR_BED 0 +#define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 #define TEMP_SENSOR_COOLER 0 @@ -444,11 +446,11 @@ //#define TEMP_SENSOR_1_AS_REDUNDANT #define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10 -#define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 +#define TEMP_RESIDENCY_TIME 0 // (seconds) Time to wait for hotend to "settle" in M109 #define TEMP_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer #define TEMP_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target -#define TEMP_BED_RESIDENCY_TIME 10 // (seconds) Time to wait for bed to "settle" in M190 +#define TEMP_BED_RESIDENCY_TIME 0 // (seconds) Time to wait for bed to "settle" in M190 #define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer #define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target @@ -513,13 +515,13 @@ #if ENABLED(PID_PARAMS_PER_HOTEND) // Specify between 1 and HOTENDS values per array. // If fewer than EXTRUDER values are provided, the last element will be repeated. - #define DEFAULT_Kp_LIST { 22.20, 22.20 } - #define DEFAULT_Ki_LIST { 1.08, 1.08 } - #define DEFAULT_Kd_LIST { 114.00, 114.00 } + #define DEFAULT_Kp_LIST { 20.03, 20.03 } + #define DEFAULT_Ki_LIST { 1.22, 1.22 } + #define DEFAULT_Kd_LIST { 82.05, 82.05 } #else - #define DEFAULT_Kp 22.20 - #define DEFAULT_Ki 1.08 - #define DEFAULT_Kd 114.00 + #define DEFAULT_Kp 20.03 + #define DEFAULT_Ki 1.22 + #define DEFAULT_Kd 82.05 #endif #endif // PIDTEMP @@ -613,7 +615,7 @@ //#define PID_DEBUG // Sends debug data to the serial port. Use 'M303 D' to toggle activation. //#define PID_OPENLOOP // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX //#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay - #define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature + #define PID_FUNCTIONAL_RANGE 15 // If the temperature difference between the target temperature and the actual temperature // is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max. #endif @@ -683,11 +685,11 @@ // Specify here all the endstop connectors that are connected to any endstop or probe. // Almost all printers will be using one per axis. Probes will use one or more of the // extra connectors. Leave undefined any used for non-endstop and non-probe purposes. -#define USE_XMIN_PLUG -#define USE_YMIN_PLUG +//#define USE_XMIN_PLUG +//#define USE_YMIN_PLUG #define USE_ZMIN_PLUG -//#define USE_XMAX_PLUG -//#define USE_YMAX_PLUG +#define USE_XMAX_PLUG +#define USE_YMAX_PLUG //#define USE_ZMAX_PLUG // Enable pullup for all endstops to prevent a floating state @@ -719,9 +721,9 @@ // Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). #define X_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. #define Y_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define X_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. +#define Z_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define X_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Y_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. #define Z_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. #define Z_MIN_PROBE_ENDSTOP_INVERTING false // Set to true to invert the logic of the probe. @@ -752,7 +754,7 @@ //#define Z3_DRIVER_TYPE A4988 //#define Z4_DRIVER_TYPE A4988 #define E0_DRIVER_TYPE A4988 -//#define E1_DRIVER_TYPE A4988 +#define E1_DRIVER_TYPE A4988 //#define E2_DRIVER_TYPE A4988 //#define E3_DRIVER_TYPE A4988 //#define E4_DRIVER_TYPE A4988 @@ -806,14 +808,16 @@ * Override with M92 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 500 } +// Really Sailfish... got enough precision on that float for an 8 bit system? +// I'm leaving this in for the sake of posterity. +#define DEFAULT_AXIS_STEPS_PER_UNIT { 94.139704, 94.139704, 400, 96.275201870333662468889989185642 } /** * Default Max Feed Rate (mm/s) * Override with M203 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 } +#define DEFAULT_MAX_FEEDRATE { 250, 250, 20, 100 } //#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 #if ENABLED(LIMITED_MAX_FR_EDITING) @@ -826,7 +830,7 @@ * Override with M201 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 } +#define DEFAULT_MAX_ACCELERATION { 1000, 1000, 100, 5000 } //#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 #if ENABLED(LIMITED_MAX_ACCEL_EDITING) @@ -841,9 +845,9 @@ * M204 R Retract Acceleration * M204 T Travel Acceleration */ -#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves +#define DEFAULT_ACCELERATION 250 // X, Y, Z and E max acceleration for printing moves +#define DEFAULT_RETRACT_ACCELERATION 5000 // E acceleration for retracts +#define DEFAULT_TRAVEL_ACCELERATION 500 // X, Y, Z acceleration for travel (non printing) moves /** * Default Jerk limits (mm/s) @@ -867,7 +871,7 @@ #endif #endif -#define DEFAULT_EJERK 5.0 // May be used by Linear Advance +#define DEFAULT_EJERK 2.0 // May be used by Linear Advance /** * Junction Deviation Factor @@ -877,7 +881,7 @@ * https://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html */ #if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.013 // (mm) Distance from real junction edge + #define JUNCTION_DEVIATION_MM 0.64 // (mm) Distance from real junction edge #define JD_HANDLE_SMALL_SEGMENTS // Use curvature estimation instead of just the junction angle // for small segments (< 1mm) with large junction angles (> 135°). #endif @@ -890,7 +894,7 @@ * * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained */ -//#define S_CURVE_ACCELERATION +#define S_CURVE_ACCELERATION //=========================================================================== //============================= Z Probe Options ============================= @@ -1190,14 +1194,14 @@ // @section machine // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR false +#define INVERT_X_DIR true #define INVERT_Y_DIR true -#define INVERT_Z_DIR false +#define INVERT_Z_DIR true // @section extruder // For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR false +#define INVERT_E0_DIR true #define INVERT_E1_DIR false #define INVERT_E2_DIR false #define INVERT_E3_DIR false @@ -1216,7 +1220,7 @@ * - Use a low value (i.e., Z_MIN_POS) if the nozzle falls down to the bed. * - Use a large value (i.e., Z_MAX_POS) if the bed falls down, away from the nozzle. */ -//#define Z_IDLE_HEIGHT Z_HOME_POS +#define Z_IDLE_HEIGHT Z_MAX_POS //#define Z_HOMING_HEIGHT 4 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ... // Be sure to have this much clearance over your Z_MAX_POS to prevent grinding. @@ -1225,23 +1229,23 @@ // Direction of endstops when homing; 1=MAX, -1=MIN // :[-1,1] -#define X_HOME_DIR -1 -#define Y_HOME_DIR -1 +#define X_HOME_DIR 1 +#define Y_HOME_DIR 1 #define Z_HOME_DIR -1 // @section machine // The size of the printable area -#define X_BED_SIZE 200 -#define Y_BED_SIZE 200 +#define X_BED_SIZE 230 +#define Y_BED_SIZE 150 // Travel limits (mm) after homing, corresponding to endstop positions. #define X_MIN_POS 0 #define Y_MIN_POS 0 #define Z_MIN_POS 0 -#define X_MAX_POS X_BED_SIZE -#define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 200 +#define X_MAX_POS 265 +#define Y_MAX_POS 150 +#define Z_MAX_POS 150 /** * Software Endstops @@ -1570,7 +1574,7 @@ // @section homing // The center of the bed is at (X=0, Y=0) -//#define BED_CENTER_AT_0_0 +#define BED_CENTER_AT_0_0 // Manually set the home position. Leave these undefined for automatic settings. // For DELTA this is the top-center of the Cartesian print volume. @@ -1672,12 +1676,12 @@ * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) */ -//#define EEPROM_SETTINGS // Persistent storage with M500 and M501 +#define EEPROM_SETTINGS // Persistent storage with M500 and M501 //#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. #define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load #if ENABLED(EEPROM_SETTINGS) - //#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. + #define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. #endif // @@ -1706,14 +1710,14 @@ // Preheat Constants - Up to 5 are supported without changes // #define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 180 -#define PREHEAT_1_TEMP_BED 70 +#define PREHEAT_1_TEMP_HOTEND 200 +#define PREHEAT_1_TEMP_BED 50 #define PREHEAT_1_TEMP_CHAMBER 35 #define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 #define PREHEAT_2_LABEL "ABS" -#define PREHEAT_2_TEMP_HOTEND 240 -#define PREHEAT_2_TEMP_BED 110 +#define PREHEAT_2_TEMP_HOTEND 220 +#define PREHEAT_2_TEMP_BED 100 #define PREHEAT_2_TEMP_CHAMBER 35 #define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 @@ -1728,7 +1732,7 @@ * P1 Raise the nozzle always to Z-park height. * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. */ -//#define NOZZLE_PARK_FEATURE +#define NOZZLE_PARK_FEATURE #if ENABLED(NOZZLE_PARK_FEATURE) // Specify a park position as { X, Y, Z_raise } @@ -1845,7 +1849,7 @@ * * View the current statistics with M78. */ -//#define PRINTCOUNTER +#define PRINTCOUNTER #if ENABLED(PRINTCOUNTER) #define PRINTCOUNTER_SAVE_INTERVAL 60 // (minutes) EEPROM save interval during print #endif @@ -1936,14 +1940,14 @@ * SD Card support is disabled by default. If your controller has an SD slot, * you must uncomment the following option or it won't work. */ -//#define SDSUPPORT +#define SDSUPPORT /** * SD CARD: ENABLE CRC * * Use CRC checks and retries on the SD communication. */ -//#define SD_CHECK_AND_RETRY +#define SD_CHECK_AND_RETRY /** * LCD Menu Items @@ -1991,7 +1995,7 @@ // If CLOCKWISE normally moves DOWN this makes it go UP. // If CLOCKWISE normally moves UP this makes it go DOWN. // -//#define REVERSE_MENU_DIRECTION +#define REVERSE_MENU_DIRECTION // // This option reverses the encoder direction for Select Screen. @@ -2006,7 +2010,7 @@ // // Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. // -//#define INDIVIDUAL_AXIS_HOMING_MENU +#define INDIVIDUAL_AXIS_HOMING_MENU // // SPEAKER/BUZZER @@ -2167,7 +2171,7 @@ // https://github.com/mikeshub/SailfishLCD // Uses the code directly from Sailfish // -//#define FF_INTERFACEBOARD +#define FF_INTERFACEBOARD // // TFT GLCD Panel with Marlin UI @@ -2648,7 +2652,7 @@ //#define PCA9632 // Support for PCA9533 PWM LED driver -//#define PCA9533 +#define PCA9533 /** * RGB LED / LED Strip Control diff --git a/config/examples/FlashForge/Creator 2X/Configuration_adv.h b/config/examples/FlashForge/Creator 2X/Configuration_adv.h index 5335fa012a..b715aaf7f1 100644 --- a/config/examples/FlashForge/Creator 2X/Configuration_adv.h +++ b/config/examples/FlashForge/Creator 2X/Configuration_adv.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "FlashForge/Creator 2X" + /** * Configuration_adv.h * @@ -258,7 +260,7 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 20 // Seconds + #define WATCH_TEMP_PERIOD 60 // Seconds #define WATCH_TEMP_INCREASE 2 // Degrees Celsius #endif @@ -266,7 +268,7 @@ * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_BED_PERIOD 60 // Seconds #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius /** @@ -540,8 +542,8 @@ * Multiple extruders can be assigned to the same pin in which case * the fan will turn on when any selected extruder is above the threshold. */ -#define E0_AUTO_FAN_PIN -1 -#define E1_AUTO_FAN_PIN -1 +#define E0_AUTO_FAN_PIN EX1_FAN_PIN +#define E1_AUTO_FAN_PIN EX2_FAN_PIN #define E2_AUTO_FAN_PIN -1 #define E3_AUTO_FAN_PIN -1 #define E4_AUTO_FAN_PIN -1 @@ -741,7 +743,7 @@ //#define HOMING_BACKOFF_POST_MM { 2, 2, 2 } // (mm) Backoff from endstops after homing -//#define QUICK_HOME // If G28 contains XY do a diagonal move first +#define QUICK_HOME // If G28 contains XY do a diagonal move first //#define HOME_Y_BEFORE_X // If G28 contains XY home Y before X //#define HOME_Z_FIRST // Home Z first. Requires a Z-MIN endstop (not a probe). //#define CODEPENDENT_XY_HOMING // If X/Y can't home without homing Y/X first @@ -928,7 +930,7 @@ #define DEFAULT_STEPPER_DEACTIVE_TIME 120 #define DISABLE_INACTIVE_X true #define DISABLE_INACTIVE_Y true -#define DISABLE_INACTIVE_Z true // Set 'false' if the nozzle could fall onto your printed part! +#define DISABLE_INACTIVE_Z false // Set 'false' if the nozzle could fall onto your printed part! #define DISABLE_INACTIVE_E true // Default Minimum Feedrates for printing and travel moves @@ -1102,14 +1104,14 @@ /** * I2C-based DIGIPOTs (e.g., Azteeg X3 Pro) */ -//#define DIGIPOT_MCP4018 // Requires https://github.com/felias-fogg/SlowSoftI2CMaster +#define DIGIPOT_MCP4018 // Requires https://github.com/felias-fogg/SlowSoftI2CMaster //#define DIGIPOT_MCP4451 #if EITHER(DIGIPOT_MCP4018, DIGIPOT_MCP4451) - #define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT:4 AZTEEG_X3_PRO:8 MKS_SBASE:5 MIGHTYBOARD_REVE:5 + #define DIGIPOT_I2C_NUM_CHANNELS 5 // 5DPRINT:4 AZTEEG_X3_PRO:8 MKS_SBASE:5 MIGHTYBOARD_REVE:5 // Actual motor currents in Amps. The number of entries must match DIGIPOT_I2C_NUM_CHANNELS. // These correspond to the physical drivers, so be mindful if the order is changed. - #define DIGIPOT_I2C_MOTOR_CURRENTS { 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0 } // AZTEEG_X3_PRO + #define DIGIPOT_I2C_MOTOR_CURRENTS { 0.84, 0.84, 0.4, 1.0, 1.0 } // MIGHTYBOARD_REVE //#define DIGIPOT_USE_RAW_VALUES // Use DIGIPOT_MOTOR_CURRENT raw wiper values (instead of A4988 motor currents) @@ -1123,7 +1125,7 @@ * AZTEEG_X5_MINI_WIFI 0x58 0x5C MCP4451 * MIGHTYBOARD_REVE 0x2F (0x5E) MCP4018 */ - //#define DIGIPOT_I2C_ADDRESS_A 0x2C // Unshifted slave address for first DIGIPOT + #define DIGIPOT_I2C_ADDRESS_A 0x2F // Unshifted slave address for first DIGIPOT //#define DIGIPOT_I2C_ADDRESS_B 0x2D // Unshifted slave address for second DIGIPOT #endif @@ -1138,7 +1140,7 @@ #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines #if IS_ULTIPANEL #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position" - #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen + //#define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen #endif #endif @@ -1196,11 +1198,11 @@ //#define NEO2_COLOR_PRESETS // Enable a second NeoPixel Preset Color menu option #if ENABLED(LED_COLOR_PRESETS) #define LED_USER_PRESET_RED 255 // User defined RED value - #define LED_USER_PRESET_GREEN 128 // User defined GREEN value - #define LED_USER_PRESET_BLUE 0 // User defined BLUE value + #define LED_USER_PRESET_GREEN 255 // User defined GREEN value + #define LED_USER_PRESET_BLUE 255 // User defined BLUE value #define LED_USER_PRESET_WHITE 255 // User defined WHITE value #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity - //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup + #define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup #endif #if ENABLED(NEO2_COLOR_PRESETS) #define NEO2_USER_PRESET_RED 255 // User defined RED value @@ -1301,7 +1303,7 @@ //#define BROWSE_MEDIA_ON_INSERT // Open the file browser when media is inserted - #define EVENT_GCODE_SD_ABORT "G28XY" // G-code to run on SD Abort Print (e.g., "G28XY" or "G27") + #define EVENT_GCODE_SD_ABORT "G27" // G-code to run on SD Abort Print (e.g., "G28XY" or "G27") #if ENABLED(PRINTER_EVENT_LEDS) #define PE_LEDS_COMPLETED_TIME (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination @@ -2230,7 +2232,7 @@ */ #if HAS_MULTI_EXTRUDER // Z raise distance for tool-change, as needed for some extruders - #define TOOLCHANGE_ZRAISE 2 // (mm) + #define TOOLCHANGE_ZRAISE 0 // (mm) //#define TOOLCHANGE_ZRAISE_BEFORE_RETRACT // Apply raise before swap retraction (if enabled) //#define TOOLCHANGE_NO_RETURN // Never return to previous position on tool-change #if ENABLED(TOOLCHANGE_NO_RETURN) @@ -2256,7 +2258,7 @@ #define TOOLCHANGE_FS_UNRETRACT_SPEED (25*60) // (mm/min) (On SINGLENOZZLE or Bowden loading must be slowed down) // Longer prime to clean out a SINGLENOZZLE - #define TOOLCHANGE_FS_EXTRA_PRIME 0 // (mm) Extra priming length + #define TOOLCHANGE_FS_EXTRA_PRIME 2 // (mm) Extra priming length #define TOOLCHANGE_FS_PRIME_SPEED (4.6*60) // (mm/min) Extra priming feedrate #define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm/min) Retract before cooling for less stringing, better wipe, etc. @@ -2311,19 +2313,19 @@ * * Enable PARK_HEAD_ON_PAUSE to add the G-code M125 Pause and Park. */ -//#define ADVANCED_PAUSE_FEATURE +#define ADVANCED_PAUSE_FEATURE #if ENABLED(ADVANCED_PAUSE_FEATURE) #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. // This short retract is done immediately, before parking the nozzle. #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast. #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload. + #define FILAMENT_CHANGE_UNLOAD_LENGTH 80 // (mm) The length of filament for a complete unload. // For Bowden, the full length of the tube and nozzle. // For direct drive, the full length of the nozzle. // Set to 0 for manual unloading. #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE 6 // (mm/s) Slow move when starting load. - #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 0 // (mm) Slow length, to allow time to insert material. + #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 80 // (mm) Slow length, to allow time to insert material. // 0 to disable start loading and skip to fast load only #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast. #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. @@ -2349,10 +2351,10 @@ #define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed. #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change. - //#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. + #define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. //#define HOME_BEFORE_FILAMENT_CHANGE // If needed, home before parking for filament change - //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. + #define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) #endif diff --git a/config/examples/FlashForge/CreatorPro/Configuration.h b/config/examples/FlashForge/CreatorPro/Configuration.h index 78c2dc9160..a71726c992 100644 --- a/config/examples/FlashForge/CreatorPro/Configuration.h +++ b/config/examples/FlashForge/CreatorPro/Configuration.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "FlashForge/CreatorPro" + /** * Configuration.h * @@ -69,7 +71,7 @@ // @section info // Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes. +#define STRING_CONFIG_H_AUTHOR "M. Baker" // Who made the changes. //#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) /** @@ -134,11 +136,11 @@ // Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_RAMPS_14_EFB + #define MOTHERBOARD BOARD_MIGHTYBOARD_REVE #endif // Name displayed in the LCD "Ready" message and Info menu -//#define CUSTOM_MACHINE_NAME "3D Printer" +#define CUSTOM_MACHINE_NAME "CreatorPro" // Printer's unique ID, used by some programs to differentiate between machines. // Choose your own or use a service like https://www.uuidgenerator.net/version4 @@ -148,7 +150,7 @@ // This defines the number of extruders // :[0, 1, 2, 3, 4, 5, 6, 7, 8] -#define EXTRUDERS 1 +#define EXTRUDERS 2 // Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc. #define DEFAULT_NOMINAL_FILAMENT_DIA 1.75 @@ -306,8 +308,8 @@ // Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing). // The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder). // For the other hotends it is their distance from the extruder 0 hotend. -//#define HOTEND_OFFSET_X { 0.0, 20.00 } // (mm) relative X-offset for each nozzle -//#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle +//#define HOTEND_OFFSET_X { 0.0, -34.00 } // (mm) relative X-offset for each nozzle +//#define HOTEND_OFFSET_Y { 0.0, 0.00 } // (mm) relative Y-offset for each nozzle //#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle // @section machine @@ -416,15 +418,15 @@ * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. */ -#define TEMP_SENSOR_0 1 -#define TEMP_SENSOR_1 0 +#define TEMP_SENSOR_0 -2 +#define TEMP_SENSOR_1 -2 #define TEMP_SENSOR_2 0 #define TEMP_SENSOR_3 0 #define TEMP_SENSOR_4 0 #define TEMP_SENSOR_5 0 #define TEMP_SENSOR_6 0 #define TEMP_SENSOR_7 0 -#define TEMP_SENSOR_BED 0 +#define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 #define TEMP_SENSOR_COOLER 0 @@ -444,11 +446,11 @@ //#define TEMP_SENSOR_1_AS_REDUNDANT #define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10 -#define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 +#define TEMP_RESIDENCY_TIME 0 // (seconds) Time to wait for hotend to "settle" in M109 #define TEMP_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer #define TEMP_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target -#define TEMP_BED_RESIDENCY_TIME 10 // (seconds) Time to wait for bed to "settle" in M190 +#define TEMP_BED_RESIDENCY_TIME 0 // (seconds) Time to wait for bed to "settle" in M190 #define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer #define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target @@ -513,13 +515,13 @@ #if ENABLED(PID_PARAMS_PER_HOTEND) // Specify between 1 and HOTENDS values per array. // If fewer than EXTRUDER values are provided, the last element will be repeated. - #define DEFAULT_Kp_LIST { 22.20, 22.20 } - #define DEFAULT_Ki_LIST { 1.08, 1.08 } - #define DEFAULT_Kd_LIST { 114.00, 114.00 } + #define DEFAULT_Kp_LIST { 20.03, 20.03 } + #define DEFAULT_Ki_LIST { 1.22, 1.22 } + #define DEFAULT_Kd_LIST { 82.05, 82.05 } #else - #define DEFAULT_Kp 22.20 - #define DEFAULT_Ki 1.08 - #define DEFAULT_Kd 114.00 + #define DEFAULT_Kp 20.03 + #define DEFAULT_Ki 1.22 + #define DEFAULT_Kd 82.05 #endif #endif // PIDTEMP @@ -613,7 +615,7 @@ //#define PID_DEBUG // Sends debug data to the serial port. Use 'M303 D' to toggle activation. //#define PID_OPENLOOP // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX //#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay - #define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature + #define PID_FUNCTIONAL_RANGE 15 // If the temperature difference between the target temperature and the actual temperature // is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max. #endif @@ -683,11 +685,11 @@ // Specify here all the endstop connectors that are connected to any endstop or probe. // Almost all printers will be using one per axis. Probes will use one or more of the // extra connectors. Leave undefined any used for non-endstop and non-probe purposes. -#define USE_XMIN_PLUG -#define USE_YMIN_PLUG +//#define USE_XMIN_PLUG +//#define USE_YMIN_PLUG #define USE_ZMIN_PLUG -//#define USE_XMAX_PLUG -//#define USE_YMAX_PLUG +#define USE_XMAX_PLUG +#define USE_YMAX_PLUG //#define USE_ZMAX_PLUG // Enable pullup for all endstops to prevent a floating state @@ -719,9 +721,9 @@ // Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). #define X_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. #define Y_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define X_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. +#define Z_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define X_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Y_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. #define Z_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. #define Z_MIN_PROBE_ENDSTOP_INVERTING false // Set to true to invert the logic of the probe. @@ -752,7 +754,7 @@ //#define Z3_DRIVER_TYPE A4988 //#define Z4_DRIVER_TYPE A4988 #define E0_DRIVER_TYPE A4988 -//#define E1_DRIVER_TYPE A4988 +#define E1_DRIVER_TYPE A4988 //#define E2_DRIVER_TYPE A4988 //#define E3_DRIVER_TYPE A4988 //#define E4_DRIVER_TYPE A4988 @@ -806,14 +808,16 @@ * Override with M92 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 500 } +// Really Sailfish... got enough precision on that float for an 8 bit system? +// I'm leaving this in for the sake of posterity. +#define DEFAULT_AXIS_STEPS_PER_UNIT { 94.139704, 94.139704, 400, 96.275201870333662468889989185642 } /** * Default Max Feed Rate (mm/s) * Override with M203 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 } +#define DEFAULT_MAX_FEEDRATE { 250, 250, 20, 100 } //#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 #if ENABLED(LIMITED_MAX_FR_EDITING) @@ -826,7 +830,7 @@ * Override with M201 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 } +#define DEFAULT_MAX_ACCELERATION { 1000, 1000, 100, 5000 } //#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 #if ENABLED(LIMITED_MAX_ACCEL_EDITING) @@ -841,9 +845,9 @@ * M204 R Retract Acceleration * M204 T Travel Acceleration */ -#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves +#define DEFAULT_ACCELERATION 250 // X, Y, Z and E max acceleration for printing moves +#define DEFAULT_RETRACT_ACCELERATION 5000 // E acceleration for retracts +#define DEFAULT_TRAVEL_ACCELERATION 500 // X, Y, Z acceleration for travel (non printing) moves /** * Default Jerk limits (mm/s) @@ -855,9 +859,9 @@ */ //#define CLASSIC_JERK #if ENABLED(CLASSIC_JERK) - #define DEFAULT_XJERK 10.0 - #define DEFAULT_YJERK 10.0 - #define DEFAULT_ZJERK 0.3 +#define DEFAULT_XJERK 20.0 +#define DEFAULT_YJERK 20.0 +#define DEFAULT_ZJERK 0.4 //#define TRAVEL_EXTRA_XYJERK 0.0 // Additional jerk allowance for all travel moves @@ -867,7 +871,7 @@ #endif #endif -#define DEFAULT_EJERK 5.0 // May be used by Linear Advance +#define DEFAULT_EJERK 2.0 // May be used by Linear Advance /** * Junction Deviation Factor @@ -877,7 +881,7 @@ * https://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html */ #if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.013 // (mm) Distance from real junction edge + #define JUNCTION_DEVIATION_MM 0.64 // (mm) Distance from real junction edge #define JD_HANDLE_SMALL_SEGMENTS // Use curvature estimation instead of just the junction angle // for small segments (< 1mm) with large junction angles (> 135°). #endif @@ -890,7 +894,7 @@ * * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained */ -//#define S_CURVE_ACCELERATION +#define S_CURVE_ACCELERATION //=========================================================================== //============================= Z Probe Options ============================= @@ -1190,14 +1194,14 @@ // @section machine // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR false +#define INVERT_X_DIR true #define INVERT_Y_DIR true -#define INVERT_Z_DIR false +#define INVERT_Z_DIR true // @section extruder // For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR false +#define INVERT_E0_DIR true #define INVERT_E1_DIR false #define INVERT_E2_DIR false #define INVERT_E3_DIR false @@ -1216,7 +1220,7 @@ * - Use a low value (i.e., Z_MIN_POS) if the nozzle falls down to the bed. * - Use a large value (i.e., Z_MAX_POS) if the bed falls down, away from the nozzle. */ -//#define Z_IDLE_HEIGHT Z_HOME_POS +#define Z_IDLE_HEIGHT Z_MAX_POS //#define Z_HOMING_HEIGHT 4 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ... // Be sure to have this much clearance over your Z_MAX_POS to prevent grinding. @@ -1225,23 +1229,23 @@ // Direction of endstops when homing; 1=MAX, -1=MIN // :[-1,1] -#define X_HOME_DIR -1 -#define Y_HOME_DIR -1 +#define X_HOME_DIR 1 +#define Y_HOME_DIR 1 #define Z_HOME_DIR -1 // @section machine -// The size of the printable area -#define X_BED_SIZE 200 -#define Y_BED_SIZE 200 +// these values are used in your slicer +#define X_BED_SIZE 227 +#define Y_BED_SIZE 148 // Travel limits (mm) after homing, corresponding to endstop positions. -#define X_MIN_POS 0 -#define Y_MIN_POS 0 +#define X_MIN_POS -115 +#define Y_MIN_POS -84 #define Z_MIN_POS 0 -#define X_MAX_POS X_BED_SIZE -#define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 200 +#define X_MAX_POS 152 +#define Y_MAX_POS 77 +#define Z_MAX_POS 150 /** * Software Endstops @@ -1570,7 +1574,7 @@ // @section homing // The center of the bed is at (X=0, Y=0) -//#define BED_CENTER_AT_0_0 +#define BED_CENTER_AT_0_0 // Manually set the home position. Leave these undefined for automatic settings. // For DELTA this is the top-center of the Cartesian print volume. @@ -1672,12 +1676,12 @@ * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) */ -//#define EEPROM_SETTINGS // Persistent storage with M500 and M501 +#define EEPROM_SETTINGS // Persistent storage with M500 and M501 //#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. #define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load #if ENABLED(EEPROM_SETTINGS) - //#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. + #define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. #endif // @@ -1706,14 +1710,14 @@ // Preheat Constants - Up to 5 are supported without changes // #define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 180 -#define PREHEAT_1_TEMP_BED 70 +#define PREHEAT_1_TEMP_HOTEND 200 +#define PREHEAT_1_TEMP_BED 50 #define PREHEAT_1_TEMP_CHAMBER 35 #define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 #define PREHEAT_2_LABEL "ABS" -#define PREHEAT_2_TEMP_HOTEND 240 -#define PREHEAT_2_TEMP_BED 110 +#define PREHEAT_2_TEMP_HOTEND 220 +#define PREHEAT_2_TEMP_BED 100 #define PREHEAT_2_TEMP_CHAMBER 35 #define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 @@ -1728,11 +1732,11 @@ * P1 Raise the nozzle always to Z-park height. * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. */ -//#define NOZZLE_PARK_FEATURE +#define NOZZLE_PARK_FEATURE #if ENABLED(NOZZLE_PARK_FEATURE) // Specify a park position as { X, Y, Z_raise } - #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 } + #define NOZZLE_PARK_POINT { (X_MAX_POS - 2), (Y_MAX_POS - 2), 20 } //#define NOZZLE_PARK_X_ONLY // X move only is required to park //#define NOZZLE_PARK_Y_ONLY // Y move only is required to park #define NOZZLE_PARK_Z_RAISE_MIN 2 // (mm) Always raise Z by at least this distance @@ -1845,7 +1849,7 @@ * * View the current statistics with M78. */ -//#define PRINTCOUNTER +#define PRINTCOUNTER #if ENABLED(PRINTCOUNTER) #define PRINTCOUNTER_SAVE_INTERVAL 60 // (minutes) EEPROM save interval during print #endif @@ -1936,14 +1940,14 @@ * SD Card support is disabled by default. If your controller has an SD slot, * you must uncomment the following option or it won't work. */ -//#define SDSUPPORT +#define SDSUPPORT /** * SD CARD: ENABLE CRC * * Use CRC checks and retries on the SD communication. */ -//#define SD_CHECK_AND_RETRY +#define SD_CHECK_AND_RETRY /** * LCD Menu Items @@ -1991,7 +1995,7 @@ // If CLOCKWISE normally moves DOWN this makes it go UP. // If CLOCKWISE normally moves UP this makes it go DOWN. // -//#define REVERSE_MENU_DIRECTION +#define REVERSE_MENU_DIRECTION // // This option reverses the encoder direction for Select Screen. @@ -2006,7 +2010,7 @@ // // Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. // -//#define INDIVIDUAL_AXIS_HOMING_MENU +#define INDIVIDUAL_AXIS_HOMING_MENU // // SPEAKER/BUZZER @@ -2167,7 +2171,7 @@ // https://github.com/mikeshub/SailfishLCD // Uses the code directly from Sailfish // -//#define FF_INTERFACEBOARD +#define FF_INTERFACEBOARD // // TFT GLCD Panel with Marlin UI @@ -2648,7 +2652,7 @@ //#define PCA9632 // Support for PCA9533 PWM LED driver -//#define PCA9533 +#define PCA9533 /** * RGB LED / LED Strip Control diff --git a/config/examples/FlashForge/CreatorPro/Configuration_adv.h b/config/examples/FlashForge/CreatorPro/Configuration_adv.h index 5335fa012a..69e6cb64ac 100644 --- a/config/examples/FlashForge/CreatorPro/Configuration_adv.h +++ b/config/examples/FlashForge/CreatorPro/Configuration_adv.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "FlashForge/CreatorPro" + /** * Configuration_adv.h * @@ -540,8 +542,8 @@ * Multiple extruders can be assigned to the same pin in which case * the fan will turn on when any selected extruder is above the threshold. */ -#define E0_AUTO_FAN_PIN -1 -#define E1_AUTO_FAN_PIN -1 +#define E0_AUTO_FAN_PIN EX1_FAN_PIN +#define E1_AUTO_FAN_PIN EX2_FAN_PIN #define E2_AUTO_FAN_PIN -1 #define E3_AUTO_FAN_PIN -1 #define E4_AUTO_FAN_PIN -1 @@ -741,7 +743,7 @@ //#define HOMING_BACKOFF_POST_MM { 2, 2, 2 } // (mm) Backoff from endstops after homing -//#define QUICK_HOME // If G28 contains XY do a diagonal move first +#define QUICK_HOME // If G28 contains XY do a diagonal move first //#define HOME_Y_BEFORE_X // If G28 contains XY home Y before X //#define HOME_Z_FIRST // Home Z first. Requires a Z-MIN endstop (not a probe). //#define CODEPENDENT_XY_HOMING // If X/Y can't home without homing Y/X first @@ -867,7 +869,7 @@ // On a 300mm bed a 5% grade would give a misalignment of ~1.5cm #define G34_MAX_GRADE 5 // (%) Maximum incline that G34 will handle - #define Z_STEPPER_ALIGN_ITERATIONS 5 // Number of iterations to apply during alignment + #define Z_STEPPER_ALIGN_ITERATIONS 3 // Number of iterations to apply during alignment #define Z_STEPPER_ALIGN_ACC 0.02 // Stop iterating early if the accuracy is better than this #define RESTORE_LEVELING_AFTER_G34 // Restore leveling after G34 is done? // After G34, re-home Z (G28 Z) or just calculate it from the last probe heights? @@ -928,7 +930,7 @@ #define DEFAULT_STEPPER_DEACTIVE_TIME 120 #define DISABLE_INACTIVE_X true #define DISABLE_INACTIVE_Y true -#define DISABLE_INACTIVE_Z true // Set 'false' if the nozzle could fall onto your printed part! +#define DISABLE_INACTIVE_Z false // Set 'false' if the nozzle could fall onto your printed part! #define DISABLE_INACTIVE_E true // Default Minimum Feedrates for printing and travel moves @@ -1102,14 +1104,13 @@ /** * I2C-based DIGIPOTs (e.g., Azteeg X3 Pro) */ -//#define DIGIPOT_MCP4018 // Requires https://github.com/felias-fogg/SlowSoftI2CMaster +#define DIGIPOT_MCP4018 // Requires https://github.com/felias-fogg/SlowSoftI2CMaster //#define DIGIPOT_MCP4451 #if EITHER(DIGIPOT_MCP4018, DIGIPOT_MCP4451) - #define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT:4 AZTEEG_X3_PRO:8 MKS_SBASE:5 MIGHTYBOARD_REVE:5 + #define DIGIPOT_I2C_NUM_CHANNELS 5 // 5DPRINT:4 AZTEEG_X3_PRO:8 MKS_SBASE:5 MIGHTYBOARD_REVE:5 - // Actual motor currents in Amps. The number of entries must match DIGIPOT_I2C_NUM_CHANNELS. - // These correspond to the physical drivers, so be mindful if the order is changed. - #define DIGIPOT_I2C_MOTOR_CURRENTS { 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0 } // AZTEEG_X3_PRO + // Actual motor currents in Amps, need as many here as DIGIPOT_I2C_NUM_CHANNELS + #define DIGIPOT_I2C_MOTOR_CURRENTS { 0.84, 0.84, 0.4, 1.0, 1.0 } // AZTEEG_X3_PRO //#define DIGIPOT_USE_RAW_VALUES // Use DIGIPOT_MOTOR_CURRENT raw wiper values (instead of A4988 motor currents) @@ -1138,7 +1139,7 @@ #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines #if IS_ULTIPANEL #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position" - #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen + //#define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen #endif #endif @@ -1190,17 +1191,17 @@ * LED Control Menu * Add LED Control to the LCD menu */ - //#define LED_CONTROL_MENU + #define LED_CONTROL_MENU #if ENABLED(LED_CONTROL_MENU) #define LED_COLOR_PRESETS // Enable the Preset Color menu option //#define NEO2_COLOR_PRESETS // Enable a second NeoPixel Preset Color menu option #if ENABLED(LED_COLOR_PRESETS) #define LED_USER_PRESET_RED 255 // User defined RED value - #define LED_USER_PRESET_GREEN 128 // User defined GREEN value - #define LED_USER_PRESET_BLUE 0 // User defined BLUE value + #define LED_USER_PRESET_GREEN 255 // User defined GREEN value + #define LED_USER_PRESET_BLUE 255 // User defined BLUE value #define LED_USER_PRESET_WHITE 255 // User defined WHITE value #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity - //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup + #define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup #endif #if ENABLED(NEO2_COLOR_PRESETS) #define NEO2_USER_PRESET_RED 255 // User defined RED value @@ -1301,7 +1302,7 @@ //#define BROWSE_MEDIA_ON_INSERT // Open the file browser when media is inserted - #define EVENT_GCODE_SD_ABORT "G28XY" // G-code to run on SD Abort Print (e.g., "G28XY" or "G27") + #define EVENT_GCODE_SD_ABORT "G27" // G-code to run on SD Abort Print (e.g., "G28XY" or "G27") #if ENABLED(PRINTER_EVENT_LEDS) #define PE_LEDS_COMPLETED_TIME (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination @@ -2230,7 +2231,7 @@ */ #if HAS_MULTI_EXTRUDER // Z raise distance for tool-change, as needed for some extruders - #define TOOLCHANGE_ZRAISE 2 // (mm) + #define TOOLCHANGE_ZRAISE 0 // (mm) //#define TOOLCHANGE_ZRAISE_BEFORE_RETRACT // Apply raise before swap retraction (if enabled) //#define TOOLCHANGE_NO_RETURN // Never return to previous position on tool-change #if ENABLED(TOOLCHANGE_NO_RETURN) @@ -2311,19 +2312,19 @@ * * Enable PARK_HEAD_ON_PAUSE to add the G-code M125 Pause and Park. */ -//#define ADVANCED_PAUSE_FEATURE +#define ADVANCED_PAUSE_FEATURE #if ENABLED(ADVANCED_PAUSE_FEATURE) #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. // This short retract is done immediately, before parking the nozzle. #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast. #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload. + #define FILAMENT_CHANGE_UNLOAD_LENGTH 80 // (mm) The length of filament for a complete unload. // For Bowden, the full length of the tube and nozzle. // For direct drive, the full length of the nozzle. // Set to 0 for manual unloading. #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE 6 // (mm/s) Slow move when starting load. - #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 0 // (mm) Slow length, to allow time to insert material. + #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 80 // (mm) Slow length, to allow time to insert material. // 0 to disable start loading and skip to fast load only #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast. #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. @@ -2349,10 +2350,10 @@ #define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed. #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change. - //#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. + #define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. //#define HOME_BEFORE_FILAMENT_CHANGE // If needed, home before parking for filament change - //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. + #define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) #endif diff --git a/config/examples/FlyingBear/P905H/Configuration.h b/config/examples/FlyingBear/P905H/Configuration.h index 78c2dc9160..50f9d99b3a 100644 --- a/config/examples/FlyingBear/P905H/Configuration.h +++ b/config/examples/FlyingBear/P905H/Configuration.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "FlyingBear/P905H" + /** * Configuration.h * @@ -69,7 +71,7 @@ // @section info // Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes. +#define STRING_CONFIG_H_AUTHOR "Rumato Estorsky" // Who made the changes. //#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) /** @@ -134,7 +136,7 @@ // Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_RAMPS_14_EFB + #define MOTHERBOARD BOARD_MKS_GEN_13 #endif // Name displayed in the LCD "Ready" message and Info menu @@ -424,7 +426,7 @@ #define TEMP_SENSOR_5 0 #define TEMP_SENSOR_6 0 #define TEMP_SENSOR_7 0 -#define TEMP_SENSOR_BED 0 +#define TEMP_SENSOR_BED 11 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 #define TEMP_SENSOR_COOLER 0 @@ -510,16 +512,17 @@ //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) // Set/get with gcode: M301 E[extruder number, 0-2] + // P905 #if ENABLED(PID_PARAMS_PER_HOTEND) // Specify between 1 and HOTENDS values per array. // If fewer than EXTRUDER values are provided, the last element will be repeated. - #define DEFAULT_Kp_LIST { 22.20, 22.20 } - #define DEFAULT_Ki_LIST { 1.08, 1.08 } - #define DEFAULT_Kd_LIST { 114.00, 114.00 } + #define DEFAULT_Kp_LIST { 15.35, 15.35 } + #define DEFAULT_Ki_LIST { 1.16, 1.16 } + #define DEFAULT_Kd_LIST { 150.60, 150.60 } #else - #define DEFAULT_Kp 22.20 - #define DEFAULT_Ki 1.08 - #define DEFAULT_Kd 114.00 + #define DEFAULT_Kp 15.35 + #define DEFAULT_Ki 1.16 + #define DEFAULT_Kd 150.60 #endif #endif // PIDTEMP @@ -717,13 +720,13 @@ #endif // Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define X_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. +#define X_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Y_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Z_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define X_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Y_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. #define Z_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_PROBE_ENDSTOP_INVERTING false // Set to true to invert the logic of the probe. +#define Z_MIN_PROBE_ENDSTOP_INVERTING true // Set to true to invert the logic of the probe. /** * Stepper Drivers @@ -806,14 +809,14 @@ * Override with M92 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 500 } +#define DEFAULT_AXIS_STEPS_PER_UNIT { 100, 100, 800, 94 } /** * Default Max Feed Rate (mm/s) * Override with M203 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 } +#define DEFAULT_MAX_FEEDRATE { 150, 150, 4, 25 } //#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 #if ENABLED(LIMITED_MAX_FR_EDITING) @@ -826,7 +829,7 @@ * Override with M201 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 } +#define DEFAULT_MAX_ACCELERATION { 1000, 1000, 50, 10000 } //#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 #if ENABLED(LIMITED_MAX_ACCEL_EDITING) @@ -841,9 +844,9 @@ * M204 R Retract Acceleration * M204 T Travel Acceleration */ -#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves +#define DEFAULT_ACCELERATION 400 // X, Y, Z and E acceleration for printing moves #define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves +#define DEFAULT_TRAVEL_ACCELERATION 600 // X, Y, Z acceleration for travel (non printing) moves /** * Default Jerk limits (mm/s) @@ -853,6 +856,7 @@ * When changing speed and direction, if the difference is less than the * value set here, it may happen instantaneously. */ +// P905H could work with classic jerk too //#define CLASSIC_JERK #if ENABLED(CLASSIC_JERK) #define DEFAULT_XJERK 10.0 @@ -867,7 +871,7 @@ #endif #endif -#define DEFAULT_EJERK 5.0 // May be used by Linear Advance +#define DEFAULT_EJERK 2.5 // May be used by Linear Advance /** * Junction Deviation Factor @@ -877,7 +881,8 @@ * https://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html */ #if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.013 // (mm) Distance from real junction edge + // P905H value increased (considering slow acceleration) to get near classic jerk quality + #define JUNCTION_DEVIATION_MM 0.1 // 0.013 // (mm) Distance from real junction edge #define JD_HANDLE_SMALL_SEGMENTS // Use curvature estimation instead of just the junction angle // for small segments (< 1mm) with large junction angles (> 135°). #endif @@ -890,6 +895,7 @@ * * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained */ +// P905H works with s-curve but I saw no quality improvements //#define S_CURVE_ACCELERATION //=========================================================================== @@ -946,7 +952,7 @@ * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. * (e.g., an inductive probe or a nozzle-based probe-switch.) */ -//#define FIX_MOUNTED_PROBE +#define FIX_MOUNTED_PROBE /** * Use the nozzle as the probe, as with a conductive @@ -1055,11 +1061,11 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +#define NOZZLE_TO_PROBE_OFFSET { 10, -33, 0 } // Most probes should stay away from the edges of the bed, but // with NOZZLE_AS_PROBE this can be negative for a wider probing area. -#define PROBING_MARGIN 10 +#define PROBING_MARGIN 20 // X and Y axis travel speed (mm/min) between probes #define XY_PROBE_FEEDRATE (133*60) @@ -1131,8 +1137,8 @@ #define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping // For M851 give a range for adjusting the Z probe offset -#define Z_PROBE_OFFSET_RANGE_MIN -20 -#define Z_PROBE_OFFSET_RANGE_MAX 20 +#define Z_PROBE_OFFSET_RANGE_MIN -10 +#define Z_PROBE_OFFSET_RANGE_MAX 10 // Enable the M48 repeatability test to test probe accuracy //#define Z_MIN_PROBE_REPEATABILITY_TEST @@ -1190,15 +1196,15 @@ // @section machine // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR false +#define INVERT_X_DIR true #define INVERT_Y_DIR true -#define INVERT_Z_DIR false +#define INVERT_Z_DIR true // @section extruder // For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR false -#define INVERT_E1_DIR false +#define INVERT_E0_DIR true +#define INVERT_E1_DIR true #define INVERT_E2_DIR false #define INVERT_E3_DIR false #define INVERT_E4_DIR false @@ -1232,16 +1238,17 @@ // @section machine // The size of the printable area -#define X_BED_SIZE 200 -#define Y_BED_SIZE 200 +// P905H bed is 220x220 but effective size more like 218x218 +#define X_BED_SIZE 218 +#define Y_BED_SIZE 218 // Travel limits (mm) after homing, corresponding to endstop positions. #define X_MIN_POS 0 -#define Y_MIN_POS 0 +#define Y_MIN_POS -7 // P905H effective bed offset #define Z_MIN_POS 0 #define X_MAX_POS X_BED_SIZE #define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 200 +#define Z_MAX_POS 200 // P905H max value could be up to 204 /** * Software Endstops @@ -1269,7 +1276,7 @@ #endif #if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS) - //#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD + #define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD #endif /** @@ -1386,7 +1393,7 @@ * With an LCD controller the process is guided step-by-step. */ //#define AUTO_BED_LEVELING_3POINT -//#define AUTO_BED_LEVELING_LINEAR +#define AUTO_BED_LEVELING_LINEAR //#define AUTO_BED_LEVELING_BILINEAR //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING @@ -1396,7 +1403,7 @@ * these options to restore the prior leveling state or to always enable * leveling immediately after G28. */ -//#define RESTORE_LEVELING_AFTER_G28 +#define RESTORE_LEVELING_AFTER_G28 //#define ENABLE_LEVELING_AFTER_G28 /** @@ -1587,7 +1594,7 @@ // - Move the Z probe (or nozzle) to a defined XY point before Z Homing. // - Prevent Z homing when the Z probe is outside bed area. // -//#define Z_SAFE_HOMING +#define Z_SAFE_HOMING #if ENABLED(Z_SAFE_HOMING) #define Z_SAFE_HOMING_X_POINT X_CENTER // X point for Z homing @@ -1672,12 +1679,12 @@ * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) */ -//#define EEPROM_SETTINGS // Persistent storage with M500 and M501 +#define EEPROM_SETTINGS // Persistent storage with M500 and M501 //#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. #define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load #if ENABLED(EEPROM_SETTINGS) - //#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. + #define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. #endif // @@ -1707,13 +1714,13 @@ // #define PREHEAT_1_LABEL "PLA" #define PREHEAT_1_TEMP_HOTEND 180 -#define PREHEAT_1_TEMP_BED 70 +#define PREHEAT_1_TEMP_BED 50 #define PREHEAT_1_TEMP_CHAMBER 35 #define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 #define PREHEAT_2_LABEL "ABS" -#define PREHEAT_2_TEMP_HOTEND 240 -#define PREHEAT_2_TEMP_BED 110 +#define PREHEAT_2_TEMP_HOTEND 230 +#define PREHEAT_2_TEMP_BED 100 #define PREHEAT_2_TEMP_CHAMBER 35 #define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 @@ -1936,7 +1943,7 @@ * SD Card support is disabled by default. If your controller has an SD slot, * you must uncomment the following option or it won't work. */ -//#define SDSUPPORT +#define SDSUPPORT /** * SD CARD: ENABLE CRC @@ -2037,7 +2044,7 @@ // // Note: Usually sold with a white PCB. // -//#define REPRAP_DISCOUNT_SMART_CONTROLLER +#define REPRAP_DISCOUNT_SMART_CONTROLLER // // GT2560 (YHCB2004) LCD Display @@ -2394,7 +2401,7 @@ #endif // -// Touch-screen LCD for Malyan M200/M300 printers +// Touch-screen LCD for Malyan M200 printers // //#define MALYAN_LCD #if ENABLED(MALYAN_LCD) diff --git a/config/examples/FlyingBear/P905H/Configuration_adv.h b/config/examples/FlyingBear/P905H/Configuration_adv.h index 5335fa012a..d65c71b000 100644 --- a/config/examples/FlyingBear/P905H/Configuration_adv.h +++ b/config/examples/FlyingBear/P905H/Configuration_adv.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "FlyingBear/P905H" + /** * Configuration_adv.h * @@ -1287,8 +1289,8 @@ #define SD_PROCEDURE_DEPTH 1 // Increase if you need more nested M32 calls - #define SD_FINISHED_STEPPERRELEASE true // Disable steppers when SD Print is finished - #define SD_FINISHED_RELEASECOMMAND "M84" // Use "M84XYE" to keep Z enabled so your bed stays in place + #define SD_FINISHED_STEPPERRELEASE true // Disable steppers when SD Print is finished + #define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the Z enabled so your bed stays in place. // Reverse SD sort to show "more recent" files first, according to the card's FAT. // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended. @@ -1314,6 +1316,9 @@ * during SD printing. If the recovery file is found at boot time, present * an option on the LCD screen to continue the print from the last-known * point in the file. + * + * If the machine reboots when resuming a print you may need to replace or + * reformat the SD card. (Bad sectors delay startup triggering the watchdog.) */ //#define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) @@ -1790,7 +1795,7 @@ * * Warning: Does not respect endstops! */ -//#define BABYSTEPPING +#define BABYSTEPPING #if ENABLED(BABYSTEPPING) //#define INTEGRATED_BABYSTEPPING // EXPERIMENTAL integration of babystepping into the Stepper ISR //#define BABYSTEP_WITHOUT_HOMING diff --git a/config/examples/FolgerTech/i3-2020/Configuration.h b/config/examples/FolgerTech/i3-2020/Configuration.h index 78c2dc9160..157c98f8f5 100644 --- a/config/examples/FolgerTech/i3-2020/Configuration.h +++ b/config/examples/FolgerTech/i3-2020/Configuration.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "FolgerTech/i3-2020" + /** * Configuration.h * @@ -138,7 +140,7 @@ #endif // Name displayed in the LCD "Ready" message and Info menu -//#define CUSTOM_MACHINE_NAME "3D Printer" +#define CUSTOM_MACHINE_NAME "FT-2020 v9" // Printer's unique ID, used by some programs to differentiate between machines. // Choose your own or use a service like https://www.uuidgenerator.net/version4 @@ -416,7 +418,7 @@ * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. */ -#define TEMP_SENSOR_0 1 +#define TEMP_SENSOR_0 5 #define TEMP_SENSOR_1 0 #define TEMP_SENSOR_2 0 #define TEMP_SENSOR_3 0 @@ -424,7 +426,7 @@ #define TEMP_SENSOR_5 0 #define TEMP_SENSOR_6 0 #define TEMP_SENSOR_7 0 -#define TEMP_SENSOR_BED 0 +#define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 #define TEMP_SENSOR_COOLER 0 @@ -472,15 +474,15 @@ // Above this temperature the heater will be switched off. // This can protect components from overheating, but NOT from shorts and failures. // (Use MINTEMP for thermistor short/failure protection.) -#define HEATER_0_MAXTEMP 275 -#define HEATER_1_MAXTEMP 275 -#define HEATER_2_MAXTEMP 275 -#define HEATER_3_MAXTEMP 275 -#define HEATER_4_MAXTEMP 275 -#define HEATER_5_MAXTEMP 275 -#define HEATER_6_MAXTEMP 275 -#define HEATER_7_MAXTEMP 275 -#define BED_MAXTEMP 150 +#define HEATER_0_MAXTEMP 245 +#define HEATER_1_MAXTEMP 245 +#define HEATER_2_MAXTEMP 245 +#define HEATER_3_MAXTEMP 245 +#define HEATER_4_MAXTEMP 245 +#define HEATER_5_MAXTEMP 245 +#define HEATER_6_MAXTEMP 245 +#define HEATER_7_MAXTEMP 245 +#define BED_MAXTEMP 115 #define CHAMBER_MAXTEMP 60 /** @@ -510,16 +512,17 @@ //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) // Set/get with gcode: M301 E[extruder number, 0-2] + // FolgerTech i3-2020 #if ENABLED(PID_PARAMS_PER_HOTEND) // Specify between 1 and HOTENDS values per array. // If fewer than EXTRUDER values are provided, the last element will be repeated. - #define DEFAULT_Kp_LIST { 22.20, 22.20 } - #define DEFAULT_Ki_LIST { 1.08, 1.08 } - #define DEFAULT_Kd_LIST { 114.00, 114.00 } + #define DEFAULT_Kp_LIST { 11.50, 11.50 } + #define DEFAULT_Ki_LIST { 0.50, 0.50 } + #define DEFAULT_Kd_LIST { 60.00, 60.00 } #else - #define DEFAULT_Kp 22.20 - #define DEFAULT_Ki 1.08 - #define DEFAULT_Kd 114.00 + #define DEFAULT_Kp 11.50 + #define DEFAULT_Ki 0.50 + #define DEFAULT_Kd 60.00 #endif #endif // PIDTEMP @@ -540,7 +543,7 @@ * heater. If your configuration is significantly different than this and you don't understand * the issues involved, don't use bed PID until someone else verifies that your hardware works. */ -//#define PIDTEMPBED +#define PIDTEMPBED //#define BED_LIMIT_SWITCHING @@ -558,9 +561,9 @@ // 120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) // from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) - #define DEFAULT_bedKp 10.00 - #define DEFAULT_bedKi .023 - #define DEFAULT_bedKd 305.4 + #define DEFAULT_bedKp 250.0 + #define DEFAULT_bedKi 18.0 + #define DEFAULT_bedKd 950.0 // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. #endif // PIDTEMPBED @@ -717,13 +720,13 @@ #endif // Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. +#define X_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Y_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Z_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. #define X_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. #define Y_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. #define Z_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_PROBE_ENDSTOP_INVERTING false // Set to true to invert the logic of the probe. +#define Z_MIN_PROBE_ENDSTOP_INVERTING true // Set to true to invert the logic of the probe. /** * Stepper Drivers @@ -806,14 +809,15 @@ * Override with M92 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 500 } +//#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 4000, 52.2 } // 52.4 is correct for printer as shipped +#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 4000, 104.4 } // 104.4 with 32 micro steps enabled gives better results /** * Default Max Feed Rate (mm/s) * Override with M203 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 } +#define DEFAULT_MAX_FEEDRATE { 250, 250, 2, 17 } //#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 #if ENABLED(LIMITED_MAX_FR_EDITING) @@ -826,7 +830,7 @@ * Override with M201 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 } +#define DEFAULT_MAX_ACCELERATION { 1000, 1000, 4, 750 } //#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 #if ENABLED(LIMITED_MAX_ACCEL_EDITING) @@ -841,9 +845,9 @@ * M204 R Retract Acceleration * M204 T Travel Acceleration */ -#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves +#define DEFAULT_ACCELERATION 500 // X, Y, Z and E acceleration for printing moves +#define DEFAULT_RETRACT_ACCELERATION 400 // E acceleration for retracts +#define DEFAULT_TRAVEL_ACCELERATION 400 // X, Y, Z acceleration for travel (non printing) moves /** * Default Jerk limits (mm/s) @@ -855,8 +859,8 @@ */ //#define CLASSIC_JERK #if ENABLED(CLASSIC_JERK) - #define DEFAULT_XJERK 10.0 - #define DEFAULT_YJERK 10.0 + #define DEFAULT_XJERK 8.5 + #define DEFAULT_YJERK 8.5 #define DEFAULT_ZJERK 0.3 //#define TRAVEL_EXTRA_XYJERK 0.0 // Additional jerk allowance for all travel moves @@ -867,7 +871,7 @@ #endif #endif -#define DEFAULT_EJERK 5.0 // May be used by Linear Advance +#define DEFAULT_EJERK 4.0 // May be used by Linear Advance /** * Junction Deviation Factor @@ -877,7 +881,7 @@ * https://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html */ #if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.013 // (mm) Distance from real junction edge + #define JUNCTION_DEVIATION_MM 0.058 // (mm) Distance from real junction edge #define JD_HANDLE_SMALL_SEGMENTS // Use curvature estimation instead of just the junction angle // for small segments (< 1mm) with large junction angles (> 135°). #endif @@ -957,8 +961,8 @@ /** * Z Servo Probe, such as an endstop switch on a rotating arm. */ -//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector. -//#define Z_SERVO_ANGLES { 70, 0 } // Z Servo Deploy and Stow angles +#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector. +#define Z_SERVO_ANGLES { 40,85 } // Z Servo Deploy and Stow angles /** * The BLTouch probe uses a Hall effect sensor and emulates a servo. @@ -1055,17 +1059,17 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +#define NOZZLE_TO_PROBE_OFFSET { 38, -7, -10.75 } // Most probes should stay away from the edges of the bed, but // with NOZZLE_AS_PROBE this can be negative for a wider probing area. -#define PROBING_MARGIN 10 +#define PROBING_MARGIN 0 // X and Y axis travel speed (mm/min) between probes -#define XY_PROBE_FEEDRATE (133*60) +#define XY_PROBE_FEEDRATE (125*60) // Feedrate (mm/min) for the first approach when double-probing (MULTIPLE_PROBING == 2) -#define Z_PROBE_FEEDRATE_FAST (4*60) +#define Z_PROBE_FEEDRATE_FAST (55) // Feedrate (mm/min) for the "accurate" probe of each point #define Z_PROBE_FEEDRATE_SLOW (Z_PROBE_FEEDRATE_FAST / 2) @@ -1123,10 +1127,10 @@ * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. */ -#define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow -#define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points +#define Z_CLEARANCE_DEPLOY_PROBE 3 // Z Clearance for Deploy/Stow +#define Z_CLEARANCE_BETWEEN_PROBES 3 // Z Clearance between probe points #define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes -//#define Z_AFTER_PROBING 5 // Z position after probing is done +//#define Z_AFTER_PROBING 3 // Z position after probing is done #define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping @@ -1135,7 +1139,7 @@ #define Z_PROBE_OFFSET_RANGE_MAX 20 // Enable the M48 repeatability test to test probe accuracy -//#define Z_MIN_PROBE_REPEATABILITY_TEST +#define Z_MIN_PROBE_REPEATABILITY_TEST // Before deploy/stow pause for user confirmation //#define PAUSE_BEFORE_DEPLOY_STOW @@ -1192,12 +1196,12 @@ // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR false #define INVERT_Y_DIR true -#define INVERT_Z_DIR false +#define INVERT_Z_DIR true // @section extruder // For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR false +#define INVERT_E0_DIR true #define INVERT_E1_DIR false #define INVERT_E2_DIR false #define INVERT_E3_DIR false @@ -1218,7 +1222,7 @@ */ //#define Z_IDLE_HEIGHT Z_HOME_POS -//#define Z_HOMING_HEIGHT 4 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ... +#define Z_HOMING_HEIGHT 2 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ... // Be sure to have this much clearance over your Z_MAX_POS to prevent grinding. //#define Z_AFTER_HOMING 10 // (mm) Height to move to after homing Z @@ -1232,16 +1236,16 @@ // @section machine // The size of the printable area -#define X_BED_SIZE 200 -#define Y_BED_SIZE 200 +#define X_BED_SIZE (X_MAX_POS-X_MIN_POS) +#define Y_BED_SIZE (Y_MAX_POS-Y_MIN_POS) // Travel limits (mm) after homing, corresponding to endstop positions. -#define X_MIN_POS 0 -#define Y_MIN_POS 0 +#define X_MIN_POS 6 +#define Y_MIN_POS 3 #define Z_MIN_POS 0 -#define X_MAX_POS X_BED_SIZE -#define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 200 +#define X_MAX_POS 207 +#define Y_MAX_POS 182 +#define Z_MAX_POS 175 /** * Software Endstops @@ -1253,7 +1257,7 @@ */ // Min software endstops constrain movement within minimum coordinate bounds -#define MIN_SOFTWARE_ENDSTOPS +//#define MIN_SOFTWARE_ENDSTOPS #if ENABLED(MIN_SOFTWARE_ENDSTOPS) #define MIN_SOFTWARE_ENDSTOP_X #define MIN_SOFTWARE_ENDSTOP_Y @@ -1388,7 +1392,7 @@ //#define AUTO_BED_LEVELING_3POINT //#define AUTO_BED_LEVELING_LINEAR //#define AUTO_BED_LEVELING_BILINEAR -//#define AUTO_BED_LEVELING_UBL +#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING /** @@ -1396,7 +1400,7 @@ * these options to restore the prior leveling state or to always enable * leveling immediately after G28. */ -//#define RESTORE_LEVELING_AFTER_G28 +#define RESTORE_LEVELING_AFTER_G28 //#define ENABLE_LEVELING_AFTER_G28 /** @@ -1432,13 +1436,13 @@ // For Cartesian machines, instead of dividing moves on mesh boundaries, // split up moves into short segments like a Delta. This follows the // contours of the bed more closely than edge-to-edge straight moves. - #define SEGMENT_LEVELED_MOVES +//#define SEGMENT_LEVELED_MOVES #define LEVELED_SEGMENT_LENGTH 5.0 // (mm) Length of all segments (except the last one) /** * Enable the G26 Mesh Validation Pattern tool. */ - //#define G26_MESH_VALIDATION + #define G26_MESH_VALIDATION #if ENABLED(G26_MESH_VALIDATION) #define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle. #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for G26. @@ -1486,7 +1490,7 @@ //#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh - #define MESH_INSET 1 // Set Mesh bounds as an inset region of the bed + #define MESH_INSET 0 // Set Mesh bounds as an inset region of the bed #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X @@ -1495,8 +1499,8 @@ #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 - //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used - // as the Z-Height correction value. + #define UBL_Z_RAISE_WHEN_OFF_MESH 2.50// When the nozzle is off the mesh, this value is used + // as the Z-Height correction value. //#define UBL_MESH_WIZARD // Run several commands in a row to get a complete mesh @@ -1587,7 +1591,7 @@ // - Move the Z probe (or nozzle) to a defined XY point before Z Homing. // - Prevent Z homing when the Z probe is outside bed area. // -//#define Z_SAFE_HOMING +#define Z_SAFE_HOMING #if ENABLED(Z_SAFE_HOMING) #define Z_SAFE_HOMING_X_POINT X_CENTER // X point for Z homing @@ -1595,7 +1599,7 @@ #endif // Homing speeds (mm/min) -#define HOMING_FEEDRATE_MM_M { (50*60), (50*60), (4*60) } +#define HOMING_FEEDRATE_MM_M { (40*60), (40*60), (55) } // Validate that endstops are triggered on homing moves #define VALIDATE_HOMING_ENDSTOPS @@ -1672,7 +1676,7 @@ * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) */ -//#define EEPROM_SETTINGS // Persistent storage with M500 and M501 +#define EEPROM_SETTINGS // Persistent storage with M500 and M501 //#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. #define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load @@ -1686,7 +1690,7 @@ // When enabled Marlin will send a busy status message to the host // every couple of seconds when it can't accept commands. // -#define HOST_KEEPALIVE_FEATURE // Disable this if your host doesn't like keepalive messages +//#define HOST_KEEPALIVE_FEATURE // Disable this if your host doesn't like keepalive messages #define DEFAULT_KEEPALIVE_INTERVAL 2 // Number of seconds between "busy" messages. Set with M113. #define BUSY_WHILE_HEATING // Some hosts require "busy" messages even during heating @@ -1728,7 +1732,7 @@ * P1 Raise the nozzle always to Z-park height. * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. */ -//#define NOZZLE_PARK_FEATURE +#define NOZZLE_PARK_FEATURE #if ENABLED(NOZZLE_PARK_FEATURE) // Specify a park position as { X, Y, Z_raise } @@ -1936,14 +1940,14 @@ * SD Card support is disabled by default. If your controller has an SD slot, * you must uncomment the following option or it won't work. */ -//#define SDSUPPORT +#define SDSUPPORT /** * SD CARD: ENABLE CRC * * Use CRC checks and retries on the SD communication. */ -//#define SD_CHECK_AND_RETRY +#define SD_CHECK_AND_RETRY /** * LCD Menu Items @@ -1991,7 +1995,7 @@ // If CLOCKWISE normally moves DOWN this makes it go UP. // If CLOCKWISE normally moves UP this makes it go DOWN. // -//#define REVERSE_MENU_DIRECTION +#define REVERSE_MENU_DIRECTION // // This option reverses the encoder direction for Select Screen. @@ -2037,7 +2041,7 @@ // // Note: Usually sold with a white PCB. // -//#define REPRAP_DISCOUNT_SMART_CONTROLLER +#define REPRAP_DISCOUNT_SMART_CONTROLLER // // GT2560 (YHCB2004) LCD Display @@ -2731,15 +2735,15 @@ * Set this manually if there are extra servos needing manual control. * Set to 0 to turn off servo support. */ -//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command +#define NUM_SERVOS 2 // Servo index starts with 0 for M280 command // (ms) Delay before the next move will start, to give the servo time to reach its target angle. // 300ms is a good value but you can try less delay. // If the servo can't reach the requested position, increase it. -#define SERVO_DELAY { 300 } +#define SERVO_DELAY { 500, 500 } // Only power servos during movement, otherwise leave off to prevent jitter -//#define DEACTIVATE_SERVOS_AFTER_MOVE +#define DEACTIVATE_SERVOS_AFTER_MOVE // Edit servo angles with M281 and save to EEPROM with M500 //#define EDITABLE_SERVO_ANGLES diff --git a/config/examples/FolgerTech/i3-2020/Configuration_adv.h b/config/examples/FolgerTech/i3-2020/Configuration_adv.h index 5335fa012a..5fad53d54e 100644 --- a/config/examples/FolgerTech/i3-2020/Configuration_adv.h +++ b/config/examples/FolgerTech/i3-2020/Configuration_adv.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "FolgerTech/i3-2020" + /** * Configuration_adv.h * @@ -239,7 +241,7 @@ */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_HYSTERESIS 2 // Degrees Celsius //#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops #if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP) @@ -258,7 +260,7 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 20 // Seconds + #define WATCH_TEMP_PERIOD 40 // Seconds #define WATCH_TEMP_INCREASE 2 // Degrees Celsius #endif @@ -266,7 +268,7 @@ * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_BED_PERIOD 40 // Seconds #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius /** @@ -867,7 +869,7 @@ // On a 300mm bed a 5% grade would give a misalignment of ~1.5cm #define G34_MAX_GRADE 5 // (%) Maximum incline that G34 will handle - #define Z_STEPPER_ALIGN_ITERATIONS 5 // Number of iterations to apply during alignment + #define Z_STEPPER_ALIGN_ITERATIONS 3 // Number of iterations to apply during alignment #define Z_STEPPER_ALIGN_ACC 0.02 // Stop iterating early if the accuracy is better than this #define RESTORE_LEVELING_AFTER_G34 // Restore leveling after G34 is done? // After G34, re-home Z (G28 Z) or just calculate it from the last probe heights? @@ -1253,7 +1255,7 @@ #endif #if EITHER(HAS_MARLINUI_HD44780, IS_TFTGLCD_PANEL) - //#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing + #define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing #if ENABLED(LCD_PROGRESS_BAR) #define PROGRESS_BAR_BAR_TIME 2000 // (ms) Amount of time to show the bar #define PROGRESS_BAR_MSG_TIME 3000 // (ms) Amount of time to show the status message @@ -1301,7 +1303,7 @@ //#define BROWSE_MEDIA_ON_INSERT // Open the file browser when media is inserted - #define EVENT_GCODE_SD_ABORT "G28XY" // G-code to run on SD Abort Print (e.g., "G28XY" or "G27") + #define EVENT_GCODE_SD_ABORT "G27" // G-code to run on SD Abort Print (e.g., "G28XY" or "G27") #if ENABLED(PRINTER_EVENT_LEDS) #define PE_LEDS_COMPLETED_TIME (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination @@ -1790,7 +1792,7 @@ * * Warning: Does not respect endstops! */ -//#define BABYSTEPPING +#define BABYSTEPPING #if ENABLED(BABYSTEPPING) //#define INTEGRATED_BABYSTEPPING // EXPERIMENTAL integration of babystepping into the Stepper ISR //#define BABYSTEP_WITHOUT_HOMING @@ -1798,10 +1800,10 @@ //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way //#define BABYSTEP_MILLIMETER_UNITS // Specify BABYSTEP_MULTIPLICATOR_(XY|Z) in mm instead of micro-steps - #define BABYSTEP_MULTIPLICATOR_Z 1 // (steps or mm) Steps or millimeter distance for each Z babystep - #define BABYSTEP_MULTIPLICATOR_XY 1 // (steps or mm) Steps or millimeter distance for each XY babystep + #define BABYSTEP_MULTIPLICATOR_Z 2 // (steps or mm) Steps or millimeter distance for each Z babystep + #define BABYSTEP_MULTIPLICATOR_XY 2 // (steps or mm) Steps or millimeter distance for each XY babystep - //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. + #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. // Note: Extra time may be added to mitigate controller latency. @@ -1852,12 +1854,12 @@ * Override if the automatically selected points are inadequate. */ #if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL) - //#define PROBE_PT_1_X 15 - //#define PROBE_PT_1_Y 180 - //#define PROBE_PT_2_X 15 - //#define PROBE_PT_2_Y 20 - //#define PROBE_PT_3_X 170 - //#define PROBE_PT_3_Y 20 + #define PROBE_PT_1_X 45 + #define PROBE_PT_1_Y 170 + #define PROBE_PT_2_X 45 + #define PROBE_PT_2_Y 25 + #define PROBE_PT_3_X 180 + #define PROBE_PT_3_Y 25 #endif /** @@ -2311,7 +2313,7 @@ * * Enable PARK_HEAD_ON_PAUSE to add the G-code M125 Pause and Park. */ -//#define ADVANCED_PAUSE_FEATURE +#define ADVANCED_PAUSE_FEATURE #if ENABLED(ADVANCED_PAUSE_FEATURE) #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. @@ -2349,7 +2351,7 @@ #define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed. #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change. - //#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. + #define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. //#define HOME_BEFORE_FILAMENT_CHANGE // If needed, home before parking for filament change //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. @@ -3471,7 +3473,7 @@ * - M206 and M428 are disabled. * - G92 will revert to its behavior from Marlin 1.0. */ -//#define NO_WORKSPACE_OFFSETS +#define NO_WORKSPACE_OFFSETS // Extra options for the M114 "Current Position" report //#define M114_DETAIL // Use 'M114` for details to check planner calculations @@ -3487,7 +3489,7 @@ * For clients that use a fixed-width font (like OctoPrint), leave this set to 1.0. * Otherwise, adjust according to your client and font. */ -#define PROPORTIONAL_FONT_RATIO 1.0 +#define PROPORTIONAL_FONT_RATIO 1.5 /** * Spend 28 bytes of SRAM to optimize the G-code parser @@ -3562,12 +3564,12 @@ #define MAIN_MENU_ITEM_2_GCODE "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND) //#define MAIN_MENU_ITEM_2_CONFIRM - //#define MAIN_MENU_ITEM_3_DESC "Preheat for " PREHEAT_2_LABEL - //#define MAIN_MENU_ITEM_3_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) + #define MAIN_MENU_ITEM_3_DESC "Preheat for " PREHEAT_2_LABEL + #define MAIN_MENU_ITEM_3_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) //#define MAIN_MENU_ITEM_3_CONFIRM - //#define MAIN_MENU_ITEM_4_DESC "Heat Bed/Home/Level" - //#define MAIN_MENU_ITEM_4_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29" + #define MAIN_MENU_ITEM_4_DESC "Heat Bed/Home/Level" + #define MAIN_MENU_ITEM_4_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29" //#define MAIN_MENU_ITEM_4_CONFIRM //#define MAIN_MENU_ITEM_5_DESC "Home & Info" @@ -3802,16 +3804,24 @@ * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display. * Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. */ -//#define MAX7219_DEBUG +#define MAX7219_DEBUG #if ENABLED(MAX7219_DEBUG) - #define MAX7219_CLK_PIN 64 - #define MAX7219_DIN_PIN 57 - #define MAX7219_LOAD_PIN 44 +#define MAX7219_CLK_PIN 64 // on RAMPS // Configuration of the 3 pins to control the display +#define MAX7219_DIN_PIN 57 // on RAMPS +#define MAX7219_LOAD_PIN 44 // on RAMPS - //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix +//#define MAX7219_CLK_PIN P1_04 // on Re-ARM ENET_TX_EN J12-10 +//#define MAX7219_DIN_PIN P1_00 // on Re-ARM ENET_TXD0 J12-11 +//#define MAX7219_LOAD_PIN P1_01 // on Re-ARM ENET_TXD1 J12-12 + +//#define MAX7219_CLK_PIN P4_29 // for RAMPS E1 on Re-ARM E1_ENABLE_PIN P4_29 +//#define MAX7219_DIN_PIN P2_13 // for RAMPS E1 on Re-ARM E1_DIR_PIN P2_13 +//#define MAX7219_LOAD_PIN P2_08 // for RAMPS E1 on Re-ARM E1_STEP_PIN P2_08 + + #define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix #define MAX7219_INIT_TEST 2 // Test pattern at startup: 0=none, 1=sweep, 2=spiral - #define MAX7219_NUMBER_UNITS 1 // Number of Max7219 units in chain. - #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) + #define MAX7219_NUMBER_UNITS 2 // Number of Max7219 units in chain. + #define MAX7219_ROTATE -90 // Rotate the display clockwise (in multiples of +/- 90°) // connector at: right=0 bottom=-90 top=90 left=180 //#define MAX7219_REVERSE_ORDER // The individual LED matrix units may be in reversed order //#define MAX7219_SIDE_BY_SIDE // Big chip+matrix boards can be chained side-by-side diff --git a/config/examples/Formbot/Raptor/Configuration.h b/config/examples/Formbot/Raptor/Configuration.h index 78c2dc9160..d64afc58fa 100644 --- a/config/examples/Formbot/Raptor/Configuration.h +++ b/config/examples/Formbot/Raptor/Configuration.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Formbot/Raptor" + /** * Configuration.h * @@ -66,10 +68,53 @@ // //=========================================================================== +// vvvvvv CUSTOMIZE FOR YOUR MACHINE vvvvvv + +// Change only the flags in this section. +// Further customizations have not been tested. + +/** + * Enable if you replace the stepper drivers with TMC2208. Be sure to remove MS3 jumper + * under the stepper driver! Plug-and-play results in StealthChop 2 being enabled. + * Stealthchop with TMC2208 on E will disable Linear Advance! + * Enable SpreadCycle to use Linear Advance with a TMC2208 on the extruder! + * These options assume configuration with OTP bits. + * If a UART connection is used to configure the driver, please select that as well in Configuration_adv.h. + */ +//#define X_2208 +//#define X_SPREADCYCLE +//#define Y_2208 +//#define Y_SPREADCYCLE +//#define E_2208 +//#define E_SPREADCYCLE + +/** + * Enable if you install a KEENOVO AC BED with Solid State Relay + */ +//#define BED_AC + +/** + * Enable for all-metal hotend PID tuning + */ +//#define HotendAllMetal + +/** + * Enable if you install a filament runout sensor from www.formbotusa.com + */ +//#define RunoutSensor + +/** + * Enable if you wish to select Unified Bed Leveling. + * Under CUSTOM COMMANDS, run Step 1 and 2 before setting Z Offset. + */ +//#define UBL + +// ^^^^^^ CUSTOMIZE FOR YOUR MACHINE ^^^^^^ + // @section info // Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes. +#define STRING_CONFIG_H_AUTHOR "Tinymachines3D" // Who made the changes. //#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) /** @@ -87,10 +132,10 @@ #define SHOW_BOOTSCREEN // Show the bitmap in Marlin/_Bootscreen.h on startup. -//#define SHOW_CUSTOM_BOOTSCREEN +#define SHOW_CUSTOM_BOOTSCREEN // Show the bitmap in Marlin/_Statusscreen.h on the status screen. -//#define CUSTOM_STATUS_SCREEN_IMAGE +#define CUSTOM_STATUS_SCREEN_IMAGE // @section machine @@ -127,18 +172,18 @@ * * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ -#define BAUDRATE 250000 +#define BAUDRATE 115200 // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH // Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_RAMPS_14_EFB + #define MOTHERBOARD BOARD_FORMBOT_RAPTOR #endif // Name displayed in the LCD "Ready" message and Info menu -//#define CUSTOM_MACHINE_NAME "3D Printer" +#define CUSTOM_MACHINE_NAME "TM3D RaPtOr" // Printer's unique ID, used by some programs to differentiate between machines. // Choose your own or use a service like https://www.uuidgenerator.net/version4 @@ -424,7 +469,11 @@ #define TEMP_SENSOR_5 0 #define TEMP_SENSOR_6 0 #define TEMP_SENSOR_7 0 -#define TEMP_SENSOR_BED 0 +#if ENABLED(BED_AC) + #define TEMP_SENSOR_BED 11 +#else + #define TEMP_SENSOR_BED 1 +#endif #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 #define TEMP_SENSOR_COOLER 0 @@ -472,15 +521,17 @@ // Above this temperature the heater will be switched off. // This can protect components from overheating, but NOT from shorts and failures. // (Use MINTEMP for thermistor short/failure protection.) -#define HEATER_0_MAXTEMP 275 +#define HEATER_0_MAXTEMP 290 #define HEATER_1_MAXTEMP 275 #define HEATER_2_MAXTEMP 275 #define HEATER_3_MAXTEMP 275 #define HEATER_4_MAXTEMP 275 #define HEATER_5_MAXTEMP 275 -#define HEATER_6_MAXTEMP 275 -#define HEATER_7_MAXTEMP 275 -#define BED_MAXTEMP 150 +#if ENABLED(BED_AC) + #define BED_MAXTEMP 150 +#else + #define BED_MAXTEMP 100 +#endif #define CHAMBER_MAXTEMP 60 /** @@ -505,21 +556,31 @@ #define PID_K1 0.95 // Smoothing factor within any PID loop #if ENABLED(PIDTEMP) - //#define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) - //#define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) + #define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) + #define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) // Set/get with gcode: M301 E[extruder number, 0-2] + #if ENABLED(HotendAllMetal) + #define HOTEND_Kp 21.90 + #define HOTEND_Ki 1.50 + #define HOTEND_Kd 79.88 + #else + #define HOTEND_Kp 22.20 + #define HOTEND_Ki 1.08 + #define HOTEND_Kd 114.00 + #endif + #if ENABLED(PID_PARAMS_PER_HOTEND) // Specify between 1 and HOTENDS values per array. // If fewer than EXTRUDER values are provided, the last element will be repeated. - #define DEFAULT_Kp_LIST { 22.20, 22.20 } - #define DEFAULT_Ki_LIST { 1.08, 1.08 } - #define DEFAULT_Kd_LIST { 114.00, 114.00 } + #define DEFAULT_Kp_LIST { HOTEND_Kp, HOTEND_Kp } + #define DEFAULT_Ki_LIST { HOTEND_Ki, HOTEND_Ki } + #define DEFAULT_Kd_LIST { HOTEND_Kd, HOTEND_Kd } #else - #define DEFAULT_Kp 22.20 - #define DEFAULT_Ki 1.08 - #define DEFAULT_Kd 114.00 + #define DEFAULT_Kp HOTEND_Kp + #define DEFAULT_Ki HOTEND_Ki + #define DEFAULT_Kd HOTEND_Kd #endif #endif // PIDTEMP @@ -540,7 +601,7 @@ * heater. If your configuration is significantly different than this and you don't understand * the issues involved, don't use bed PID until someone else verifies that your hardware works. */ -//#define PIDTEMPBED +#define PIDTEMPBED //#define BED_LIMIT_SWITCHING @@ -558,9 +619,9 @@ // 120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) // from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) - #define DEFAULT_bedKp 10.00 - #define DEFAULT_bedKi .023 - #define DEFAULT_bedKd 305.4 + #define DEFAULT_bedKp 100.0 + #define DEFAULT_bedKi 15.0 + #define DEFAULT_bedKd 200.0 // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. #endif // PIDTEMPBED @@ -684,10 +745,10 @@ // Almost all printers will be using one per axis. Probes will use one or more of the // extra connectors. Leave undefined any used for non-endstop and non-probe purposes. #define USE_XMIN_PLUG -#define USE_YMIN_PLUG +//#define USE_YMIN_PLUG #define USE_ZMIN_PLUG //#define USE_XMAX_PLUG -//#define USE_YMAX_PLUG +#define USE_YMAX_PLUG //#define USE_ZMAX_PLUG // Enable pullup for all endstops to prevent a floating state @@ -717,12 +778,12 @@ #endif // Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. +#define X_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Y_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Z_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. #define X_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. +#define Y_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Z_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. #define Z_MIN_PROBE_ENDSTOP_INVERTING false // Set to true to invert the logic of the probe. /** @@ -806,14 +867,18 @@ * Override with M92 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 500 } +#if ENABLED(Y_2208) + #define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 1600, 96 } +#else + #define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 160, 1600, 96 } +#endif /** * Default Max Feed Rate (mm/s) * Override with M203 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 } +#define DEFAULT_MAX_FEEDRATE { 250, 150, 5, 25 } //#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 #if ENABLED(LIMITED_MAX_FR_EDITING) @@ -826,7 +891,26 @@ * Override with M201 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 } +#if ENABLED(X_2208) + #if ENABLED(X_SPREADCYCLE) + #define X_ACCEL 1750 + #else + #define X_ACCEL 1000 + #endif +#else + #define X_ACCEL 1500 +#endif + +#if ENABLED(Y_2208) + #if ENABLED(Y_SPREADCYCLE) + #define Y_ACCEL 500 + #else + #define Y_ACCEL 300 + #endif +#else + #define Y_ACCEL 500 +#endif +#define DEFAULT_MAX_ACCELERATION { X_ACCEL, Y_ACCEL, 400, 4000 } //#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 #if ENABLED(LIMITED_MAX_ACCEL_EDITING) @@ -855,9 +939,7 @@ */ //#define CLASSIC_JERK #if ENABLED(CLASSIC_JERK) - #define DEFAULT_XJERK 10.0 - #define DEFAULT_YJERK 10.0 - #define DEFAULT_ZJERK 0.3 + #define DEFAULT_ZJERK 0.4 //#define TRAVEL_EXTRA_XYJERK 0.0 // Additional jerk allowance for all travel moves @@ -867,6 +949,17 @@ #endif #endif +#if ENABLED(X_SPREADCYCLE) || DISABLED(X_2208) + #define DEFAULT_XJERK 20.0 +#else + #define DEFAULT_XJERK 10.0 +#endif +#if ENABLED(Y_SPREADCYCLE) || DISABLED(Y_2208) + #define DEFAULT_YJERK 10.0 +#else + #define DEFAULT_YJERK 5.0 +#endif + #define DEFAULT_EJERK 5.0 // May be used by Linear Advance /** @@ -877,7 +970,7 @@ * https://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html */ #if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.013 // (mm) Distance from real junction edge + #define JUNCTION_DEVIATION_MM (.4 * DEFAULT_YJERK * DEFAULT_YJERK / DEFAULT_ACCELERATION) // (mm) Distance from real junction edge #define JD_HANDLE_SMALL_SEGMENTS // Use curvature estimation instead of just the junction angle // for small segments (< 1mm) with large junction angles (> 135°). #endif @@ -963,7 +1056,7 @@ /** * The BLTouch probe uses a Hall effect sensor and emulates a servo. */ -//#define BLTOUCH +#define BLTOUCH /** * Touch-MI Probe by hotends.fr @@ -1055,7 +1148,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +#define NOZZLE_TO_PROBE_OFFSET { -22, 0, -1.5 } // Most probes should stay away from the edges of the bed, but // with NOZZLE_AS_PROBE this can be negative for a wider probing area. @@ -1106,7 +1199,7 @@ * A total of 2 does fast/slow probes with a weighted average. * A total of 3 or more adds more slow probes, taking the average. */ -//#define MULTIPLE_PROBING 2 +#define MULTIPLE_PROBING 2 //#define EXTRA_PROBING 1 /** @@ -1123,19 +1216,19 @@ * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. */ -#define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow +#define Z_CLEARANCE_DEPLOY_PROBE 5 // Z Clearance for Deploy/Stow #define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points #define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes //#define Z_AFTER_PROBING 5 // Z position after probing is done -#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping +#define Z_PROBE_LOW_POINT -3 // Farthest distance below the trigger-point to go before stopping // For M851 give a range for adjusting the Z probe offset #define Z_PROBE_OFFSET_RANGE_MIN -20 #define Z_PROBE_OFFSET_RANGE_MAX 20 // Enable the M48 repeatability test to test probe accuracy -//#define Z_MIN_PROBE_REPEATABILITY_TEST +#define Z_MIN_PROBE_REPEATABILITY_TEST // Before deploy/stow pause for user confirmation //#define PAUSE_BEFORE_DEPLOY_STOW @@ -1185,20 +1278,33 @@ // @section extruder #define DISABLE_E false // Disable the extruder when not stepping -#define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled +//#define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled // @section machine // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR false -#define INVERT_Y_DIR true -#define INVERT_Z_DIR false +#if ENABLED(X_2208) + #define INVERT_X_DIR true +#else + #define INVERT_X_DIR false +#endif +#if ENABLED(Y_2208) + #define INVERT_Y_DIR true +#else + #define INVERT_Y_DIR false +#endif +#define INVERT_Z_DIR true // @section extruder // For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR false -#define INVERT_E1_DIR false +#if ENABLED(E_2208) + #define INVERT_E0_DIR false + #define INVERT_E1_DIR false +#else + #define INVERT_E0_DIR true + #define INVERT_E1_DIR true +#endif #define INVERT_E2_DIR false #define INVERT_E3_DIR false #define INVERT_E4_DIR false @@ -1218,7 +1324,7 @@ */ //#define Z_IDLE_HEIGHT Z_HOME_POS -//#define Z_HOMING_HEIGHT 4 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ... +#define Z_HOMING_HEIGHT 4 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ... // Be sure to have this much clearance over your Z_MAX_POS to prevent grinding. //#define Z_AFTER_HOMING 10 // (mm) Height to move to after homing Z @@ -1226,14 +1332,14 @@ // Direction of endstops when homing; 1=MAX, -1=MIN // :[-1,1] #define X_HOME_DIR -1 -#define Y_HOME_DIR -1 +#define Y_HOME_DIR 1 #define Z_HOME_DIR -1 // @section machine // The size of the printable area -#define X_BED_SIZE 200 -#define Y_BED_SIZE 200 +#define X_BED_SIZE 400 +#define Y_BED_SIZE 400 // Travel limits (mm) after homing, corresponding to endstop positions. #define X_MIN_POS 0 @@ -1241,7 +1347,7 @@ #define Z_MIN_POS 0 #define X_MAX_POS X_BED_SIZE #define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 200 +#define Z_MAX_POS 500 /** * Software Endstops @@ -1269,7 +1375,7 @@ #endif #if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS) - //#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD + #define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD #endif /** @@ -1285,12 +1391,15 @@ * RAMPS-based boards use SERVO3_PIN for the first runout sensor. * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. */ -//#define FILAMENT_RUNOUT_SENSOR +#if ENABLED(RunoutSensor) + #define FILAMENT_RUNOUT_SENSOR +#endif #if ENABLED(FILAMENT_RUNOUT_SENSOR) #define FIL_RUNOUT_ENABLED_DEFAULT true // Enable the sensor on startup. Override with M412 followed by M500. #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. + #define FIL_RUNOUT_PIN 57 - #define FIL_RUNOUT_STATE LOW // Pin state indicating that filament is NOT present. + #define FIL_RUNOUT_STATE HIGH // Pin state indicating that filament is NOT present. #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. //#define WATCH_ALL_RUNOUT_SENSORS // Execute runout script on any triggering sensor, not only for the active extruder. @@ -1387,8 +1496,12 @@ */ //#define AUTO_BED_LEVELING_3POINT //#define AUTO_BED_LEVELING_LINEAR -//#define AUTO_BED_LEVELING_BILINEAR -//#define AUTO_BED_LEVELING_UBL +#if ENABLED(UBL) + #define AUTO_BED_LEVELING_UBL +#else + #define AUTO_BED_LEVELING_BILINEAR +#endif + //#define MESH_BED_LEVELING /** @@ -1396,7 +1509,7 @@ * these options to restore the prior leveling state or to always enable * leveling immediately after G28. */ -//#define RESTORE_LEVELING_AFTER_G28 +#define RESTORE_LEVELING_AFTER_G28 //#define ENABLE_LEVELING_AFTER_G28 /** @@ -1438,7 +1551,7 @@ /** * Enable the G26 Mesh Validation Pattern tool. */ - //#define G26_MESH_VALIDATION + #define G26_MESH_VALIDATION #if ENABLED(G26_MESH_VALIDATION) #define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle. #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for G26. @@ -1454,7 +1567,7 @@ #if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR) // Set the number of grid points per dimension. - #define GRID_MAX_POINTS_X 3 + #define GRID_MAX_POINTS_X 6 #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X // Probe along the Y axis, advancing X after each column @@ -1464,7 +1577,7 @@ // Beyond the probed grid, continue the implied tilt? // Default is to maintain the height of the nearest edge. - //#define EXTRAPOLATE_BEYOND_GRID + #define EXTRAPOLATE_BEYOND_GRID // // Experimental Subdivision of the grid by Catmull-Rom method. @@ -1484,9 +1597,9 @@ //========================= Unified Bed Leveling ============================ //=========================================================================== - //#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh + #define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh - #define MESH_INSET 1 // Set Mesh bounds as an inset region of the bed + #define MESH_INSET 35 // Set Mesh bounds as an inset region of the bed #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X @@ -1495,7 +1608,7 @@ #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 - //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used + #define UBL_Z_RAISE_WHEN_OFF_MESH 0.0 // When the nozzle is off the mesh, this value is used // as the Z-Height correction value. //#define UBL_MESH_WIZARD // Run several commands in a row to get a complete mesh @@ -1565,7 +1678,7 @@ * Commands to execute at the end of G29 probing. * Useful to retract or move the Z probe out of the way. */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" +#define Z_PROBE_END_SCRIPT "M280 P0 S90" // @section homing @@ -1587,11 +1700,11 @@ // - Move the Z probe (or nozzle) to a defined XY point before Z Homing. // - Prevent Z homing when the Z probe is outside bed area. // -//#define Z_SAFE_HOMING +#define Z_SAFE_HOMING #if ENABLED(Z_SAFE_HOMING) - #define Z_SAFE_HOMING_X_POINT X_CENTER // X point for Z homing - #define Z_SAFE_HOMING_Y_POINT Y_CENTER // Y point for Z homing + #define Z_SAFE_HOMING_X_POINT 50 // X point for Z homing + #define Z_SAFE_HOMING_Y_POINT 50 // Y point for Z homing #endif // Homing speeds (mm/min) @@ -1672,7 +1785,7 @@ * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) */ -//#define EEPROM_SETTINGS // Persistent storage with M500 and M501 +#define EEPROM_SETTINGS // Persistent storage with M500 and M501 //#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. #define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load @@ -1706,14 +1819,14 @@ // Preheat Constants - Up to 5 are supported without changes // #define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 180 -#define PREHEAT_1_TEMP_BED 70 +#define PREHEAT_1_TEMP_HOTEND 200 +#define PREHEAT_1_TEMP_BED 60 #define PREHEAT_1_TEMP_CHAMBER 35 #define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 #define PREHEAT_2_LABEL "ABS" -#define PREHEAT_2_TEMP_HOTEND 240 -#define PREHEAT_2_TEMP_BED 110 +#define PREHEAT_2_TEMP_HOTEND 220 +#define PREHEAT_2_TEMP_BED 100 #define PREHEAT_2_TEMP_CHAMBER 35 #define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 @@ -1728,15 +1841,15 @@ * P1 Raise the nozzle always to Z-park height. * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. */ -//#define NOZZLE_PARK_FEATURE +#define NOZZLE_PARK_FEATURE #if ENABLED(NOZZLE_PARK_FEATURE) // Specify a park position as { X, Y, Z_raise } - #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 } + #define NOZZLE_PARK_POINT { 10, 10, 20} //#define NOZZLE_PARK_X_ONLY // X move only is required to park //#define NOZZLE_PARK_Y_ONLY // Y move only is required to park #define NOZZLE_PARK_Z_RAISE_MIN 2 // (mm) Always raise Z by at least this distance - #define NOZZLE_PARK_XY_FEEDRATE 100 // (mm/s) X and Y axes feedrate (also used for delta Z axis) + #define NOZZLE_PARK_XY_FEEDRATE 70 // (mm/s) X and Y axes feedrate (also used for delta Z axis) #define NOZZLE_PARK_Z_FEEDRATE 5 // (mm/s) Z axis feedrate (not used for delta printers) #endif @@ -1845,7 +1958,7 @@ * * View the current statistics with M78. */ -//#define PRINTCOUNTER +#define PRINTCOUNTER #if ENABLED(PRINTCOUNTER) #define PRINTCOUNTER_SAVE_INTERVAL 60 // (minutes) EEPROM save interval during print #endif @@ -1936,7 +2049,7 @@ * SD Card support is disabled by default. If your controller has an SD slot, * you must uncomment the following option or it won't work. */ -//#define SDSUPPORT +#define SDSUPPORT /** * SD CARD: ENABLE CRC @@ -2006,7 +2119,7 @@ // // Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. // -//#define INDIVIDUAL_AXIS_HOMING_MENU +#define INDIVIDUAL_AXIS_HOMING_MENU // // SPEAKER/BUZZER @@ -2195,7 +2308,7 @@ // RepRapDiscount FULL GRAPHIC Smart Controller // https://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller // -//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER +#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER // // K.3D Full Graphic Smart Controller diff --git a/config/examples/Formbot/Raptor/Configuration_adv.h b/config/examples/Formbot/Raptor/Configuration_adv.h index 5335fa012a..0574b8d4dd 100644 --- a/config/examples/Formbot/Raptor/Configuration_adv.h +++ b/config/examples/Formbot/Raptor/Configuration_adv.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Formbot/Raptor" + /** * Configuration_adv.h * @@ -238,8 +240,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 210 // Seconds + #define THERMAL_PROTECTION_HYSTERESIS 2 // Degrees Celsius //#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops #if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP) @@ -258,7 +260,7 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 20 // Seconds + #define WATCH_TEMP_PERIOD 210 // Seconds #define WATCH_TEMP_INCREASE 2 // Degrees Celsius #endif @@ -266,7 +268,7 @@ * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_BED_PERIOD 300 // Seconds #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius /** @@ -479,7 +481,7 @@ // When first starting the main fan, run it at full speed for the // given number of milliseconds. This gets the fan spinning reliably // before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) -//#define FAN_KICKSTART_TIME 100 +#define FAN_KICKSTART_TIME 100 // Some coolers may require a non-zero "off" state. //#define FAN_OFF_PWM 1 @@ -573,15 +575,15 @@ /** * M355 Case Light on-off / brightness */ -//#define CASE_LIGHT_ENABLE +#define CASE_LIGHT_ENABLE #if ENABLED(CASE_LIGHT_ENABLE) //#define CASE_LIGHT_PIN 4 // Override the default pin if needed #define INVERT_CASE_LIGHT false // Set true if Case Light is ON when pin is LOW #define CASE_LIGHT_DEFAULT_ON true // Set default power-up state on - #define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // Set default power-up brightness (0-255, requires PWM pin) + #define CASE_LIGHT_DEFAULT_BRIGHTNESS 255 // Set default power-up brightness (0-255, requires PWM pin) //#define CASE_LIGHT_NO_BRIGHTNESS // Disable brightness control. Enable for non-PWM lighting. //#define CASE_LIGHT_MAX_PWM 128 // Limit PWM duty cycle (0-255) - //#define CASE_LIGHT_MENU // Add Case Light options to the LCD menu + #define CASE_LIGHT_MENU // Add Case Light options to the LCD menu #if ENABLED(NEOPIXEL_LED) //#define CASE_LIGHT_USE_NEOPIXEL // Use NeoPixel LED as case light #endif @@ -741,7 +743,7 @@ //#define HOMING_BACKOFF_POST_MM { 2, 2, 2 } // (mm) Backoff from endstops after homing -//#define QUICK_HOME // If G28 contains XY do a diagonal move first +#define QUICK_HOME // If G28 contains XY do a diagonal move first //#define HOME_Y_BEFORE_X // If G28 contains XY home Y before X //#define HOME_Z_FIRST // Home Z first. Requires a Z-MIN endstop (not a probe). //#define CODEPENDENT_XY_HOMING // If X/Y can't home without homing Y/X first @@ -867,7 +869,7 @@ // On a 300mm bed a 5% grade would give a misalignment of ~1.5cm #define G34_MAX_GRADE 5 // (%) Maximum incline that G34 will handle - #define Z_STEPPER_ALIGN_ITERATIONS 5 // Number of iterations to apply during alignment + #define Z_STEPPER_ALIGN_ITERATIONS 3 // Number of iterations to apply during alignment #define Z_STEPPER_ALIGN_ACC 0.02 // Stop iterating early if the accuracy is better than this #define RESTORE_LEVELING_AFTER_G34 // Restore leveling after G34 is done? // After G34, re-home Z (G28 Z) or just calculate it from the last probe heights? @@ -1175,7 +1177,7 @@ #endif // Include a page of printer information in the LCD Main Menu - //#define LCD_INFO_MENU + #define LCD_INFO_MENU #if ENABLED(LCD_INFO_MENU) //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages #endif @@ -1219,7 +1221,7 @@ #if HAS_DISPLAY // The timeout (in ms) to return to the status screen from sub-menus - //#define LCD_TIMEOUT_TO_STATUS 15000 + #define LCD_TIMEOUT_TO_STATUS 15000 #if ENABLED(SHOW_BOOTSCREEN) #define BOOTSCREEN_TIMEOUT 4000 // (ms) Total Duration to display the boot screen(s) @@ -1229,13 +1231,13 @@ #endif // Scroll a longer status message into view - //#define STATUS_MESSAGE_SCROLLING + #define STATUS_MESSAGE_SCROLLING // On the Info Screen, display XY with one decimal place when possible - //#define LCD_DECIMAL_SMALL_XY + #define LCD_DECIMAL_SMALL_XY // Add an 'M73' G-code to set the current percentage - //#define LCD_SET_PROGRESS_MANUALLY + #define LCD_SET_PROGRESS_MANUALLY // Show the E position (filament used) during printing //#define LCD_SHOW_E_TOTAL @@ -1301,7 +1303,7 @@ //#define BROWSE_MEDIA_ON_INSERT // Open the file browser when media is inserted - #define EVENT_GCODE_SD_ABORT "G28XY" // G-code to run on SD Abort Print (e.g., "G28XY" or "G27") + #define EVENT_GCODE_SD_ABORT "G27" // G-code to run on SD Abort Print (e.g., "G28XY" or "G27") #if ENABLED(PRINTER_EVENT_LEDS) #define PE_LEDS_COMPLETED_TIME (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination @@ -1365,9 +1367,9 @@ // SD Card Sorting options #if ENABLED(SDCARD_SORT_ALPHA) - #define SDSORT_LIMIT 40 // Maximum number of sorted items (10-256). Costs 27 bytes each. + #define SDSORT_LIMIT 20 // Maximum number of sorted items (10-256). Costs 27 bytes each. #define FOLDER_SORTING -1 // -1=above 0=none 1=below - #define SDSORT_GCODE false // Allow turning sorting on/off with LCD and M34 G-code. + #define SDSORT_GCODE true // Allow turning sorting on/off with LCD and M34 G-code. #define SDSORT_USES_RAM false // Pre-allocate a static array for faster pre-sorting. #define SDSORT_USES_STACK false // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.) #define SDSORT_CACHE_NAMES false // Keep sorted items in RAM longer for speedy performance. Most expensive option. @@ -1381,10 +1383,10 @@ //#define UTF_FILENAME_SUPPORT // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT + #define LONG_FILENAME_HOST_SUPPORT // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES + #define SCROLL_LONG_FILENAMES // Leave the heaters on after Stop Print (not recommended!) //#define SD_ABORT_NO_COOLDOWN @@ -1406,7 +1408,7 @@ /** * Auto-report SdCard status with M27 S */ - //#define AUTO_REPORT_SD_STATUS + #define AUTO_REPORT_SD_STATUS /** * Support for USB thumb drives using an Arduino USB Host Shield or @@ -1512,7 +1514,7 @@ */ #if HAS_MARLINUI_U8GLIB // Show SD percentage next to the progress bar - //#define DOGM_SD_PERCENT + #define DOGM_SD_PERCENT // Save many cycles by drawing a hollow frame or no frame on the Info Screen //#define XYZ_NO_FRAME @@ -1523,7 +1525,7 @@ // A bigger font is available for edit items. Costs 3120 bytes of PROGMEM. // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. - //#define USE_BIG_EDIT_FONT + #define USE_BIG_EDIT_FONT // A smaller font may be used on the Info Screen. Costs 2434 bytes of PROGMEM. // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. @@ -1790,7 +1792,7 @@ * * Warning: Does not respect endstops! */ -//#define BABYSTEPPING +#define BABYSTEPPING #if ENABLED(BABYSTEPPING) //#define INTEGRATED_BABYSTEPPING // EXPERIMENTAL integration of babystepping into the Stepper ISR //#define BABYSTEP_WITHOUT_HOMING @@ -1798,10 +1800,10 @@ //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way //#define BABYSTEP_MILLIMETER_UNITS // Specify BABYSTEP_MULTIPLICATOR_(XY|Z) in mm instead of micro-steps - #define BABYSTEP_MULTIPLICATOR_Z 1 // (steps or mm) Steps or millimeter distance for each Z babystep - #define BABYSTEP_MULTIPLICATOR_XY 1 // (steps or mm) Steps or millimeter distance for each XY babystep + #define BABYSTEP_MULTIPLICATOR_Z 25 // (steps or mm) Steps or millimeter distance for each Z babystep + #define BABYSTEP_MULTIPLICATOR_XY 25 // (steps or mm) Steps or millimeter distance for each Z babystep - //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. + #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. // Note: Extra time may be added to mitigate controller latency. @@ -1813,10 +1815,10 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 - //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping + #define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping #if ENABLED(BABYSTEP_ZPROBE_OFFSET) //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - //#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor + #define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif @@ -1837,7 +1839,9 @@ * * See https://marlinfw.org/docs/features/lin_advance.html for full instructions. */ -//#define LIN_ADVANCE +#if DISABLED(E_2208) || ENABLED(E_SpreadCycle) + #define LIN_ADVANCE +#endif #if ENABLED(LIN_ADVANCE) //#define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed @@ -1852,12 +1856,12 @@ * Override if the automatically selected points are inadequate. */ #if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL) - //#define PROBE_PT_1_X 15 - //#define PROBE_PT_1_Y 180 - //#define PROBE_PT_2_X 15 - //#define PROBE_PT_2_Y 20 - //#define PROBE_PT_3_X 170 - //#define PROBE_PT_3_Y 20 + #define PROBE_PT_1_X 50 + #define PROBE_PT_1_Y 350 + #define PROBE_PT_2_X 50 + #define PROBE_PT_2_Y 50 + #define PROBE_PT_3_X 350 + #define PROBE_PT_3_Y 50 #endif /** @@ -1995,7 +1999,7 @@ #endif // Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes. -//#define BEZIER_CURVE_SUPPORT +#define BEZIER_CURVE_SUPPORT /** * Direct Stepping @@ -2141,7 +2145,7 @@ * Currently handles M108, M112, M410, M876 * NOTE: Not yet implemented for all platforms. */ -//#define EMERGENCY_PARSER +#define EMERGENCY_PARSER /** * Realtime Reporting (requires EMERGENCY_PARSER) @@ -2170,7 +2174,7 @@ //#define NO_TIMEOUTS 1000 // Milliseconds // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. -//#define ADVANCED_OK +#define ADVANCED_OK // Printrun may have trouble receiving long strings all at once. // This option inserts short delays between lines of serial output. @@ -2204,7 +2208,7 @@ * * Note that M207 / M208 / M209 settings are saved to EEPROM. */ -//#define FWRETRACT +#define FWRETRACT #if ENABLED(FWRETRACT) #define FWRETRACT_AUTORETRACT // Override slicer retractions #if ENABLED(FWRETRACT_AUTORETRACT) @@ -2311,7 +2315,7 @@ * * Enable PARK_HEAD_ON_PAUSE to add the G-code M125 Pause and Park. */ -//#define ADVANCED_PAUSE_FEATURE +#define ADVANCED_PAUSE_FEATURE #if ENABLED(ADVANCED_PAUSE_FEATURE) #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. @@ -2327,7 +2331,7 @@ // 0 to disable start loading and skip to fast load only #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast. #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle. + #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 5 // (mm) Load length of filament, from extruder gear to nozzle. // For Bowden, the full length of the tube and nozzle. // For direct drive, the full length of the nozzle. //#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted. @@ -2346,14 +2350,14 @@ #define FILAMENT_UNLOAD_PURGE_FEEDRATE 25 // (mm/s) feedrate to purge before unload #define PAUSE_PARK_NOZZLE_TIMEOUT 45 // (seconds) Time limit before the nozzle is turned off for safety. - #define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed. + #define FILAMENT_CHANGE_ALERT_BEEPS 2 // Number of alert beeps to play when a response is needed. #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change. - //#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. + #define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. //#define HOME_BEFORE_FILAMENT_CHANGE // If needed, home before parking for filament change - //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. - //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) + #define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. + #define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) #endif // @section tmc @@ -3474,7 +3478,7 @@ //#define NO_WORKSPACE_OFFSETS // Extra options for the M114 "Current Position" report -//#define M114_DETAIL // Use 'M114` for details to check planner calculations +#define M114_DETAIL // Use 'M114` for details to check planner calculations //#define M114_REALTIME // Real current position based on forward kinematics //#define M114_LEGACY // M114 used to synchronize on every call. Enable if needed. @@ -3545,33 +3549,36 @@ * Up to 25 may be defined, but the actual number is LCD-dependent. */ +#if ENABLED(UBL) + #define CUSTOM_MENU_MAIN +#endif + // Custom Menu: Main Menu -//#define CUSTOM_MENU_MAIN #if ENABLED(CUSTOM_MENU_MAIN) - //#define CUSTOM_MENU_MAIN_TITLE "Custom Commands" - #define CUSTOM_MENU_MAIN_SCRIPT_DONE "M117 User Script Done" + #define CUSTOM_MENU_MAIN_TITLE "Commissioning" + //#define CUSTOM_MENU_MAIN_SCRIPT_DONE "M117 User Script Done" #define CUSTOM_MENU_MAIN_SCRIPT_AUDIBLE_FEEDBACK - //#define CUSTOM_MENU_MAIN_SCRIPT_RETURN // Return to status screen after a script + #define CUSTOM_MENU_MAIN_SCRIPT_RETURN // Return to status screen after a script #define CUSTOM_MENU_MAIN_ONLY_IDLE // Only show custom menu when the machine is idle - #define MAIN_MENU_ITEM_1_DESC "Home & UBL Info" - #define MAIN_MENU_ITEM_1_GCODE "G28\nG29 W" + #define MAIN_MENU_ITEM_1_DESC "UBL Commission Step 1" + #define MAIN_MENU_ITEM_1_GCODE "M502\nM500\nM501\nM190 S75\nG28\nG29 P1\nG29 S1\nM117 Run Step 2" //#define MAIN_MENU_ITEM_1_CONFIRM // Show a confirmation dialog before this action - #define MAIN_MENU_ITEM_2_DESC "Preheat for " PREHEAT_1_LABEL - #define MAIN_MENU_ITEM_2_GCODE "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND) + #define MAIN_MENU_ITEM_2_DESC "UBL Commission Step 2" + #define MAIN_MENU_ITEM_2_GCODE "G29 S1\nG29 S0\nG29 F 10.0\nG29 A\nM500\nG28\nG29 L1\nM109 S225\nG1 X150 Y 150\nG1 Z0\nM117 Set Z Offset" //#define MAIN_MENU_ITEM_2_CONFIRM - //#define MAIN_MENU_ITEM_3_DESC "Preheat for " PREHEAT_2_LABEL - //#define MAIN_MENU_ITEM_3_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) + #define MAIN_MENU_ITEM_3_DESC "Prep for Z Adjust" + #define MAIN_MENU_ITEM_3_GCODE "M190 75\nM104 235\nG28\nG29 L1\nG1 X150 Y 150\nG1 Z0" //#define MAIN_MENU_ITEM_3_CONFIRM - //#define MAIN_MENU_ITEM_4_DESC "Heat Bed/Home/Level" - //#define MAIN_MENU_ITEM_4_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29" + #define MAIN_MENU_ITEM_4_DESC "Fill Mesh Points" + #define MAIN_MENU_ITEM_4_GCODE "G29 P3\nG29 P3\nG29 P3\nG29 T" //#define MAIN_MENU_ITEM_4_CONFIRM - //#define MAIN_MENU_ITEM_5_DESC "Home & Info" - //#define MAIN_MENU_ITEM_5_GCODE "G28\nM503" + #define MAIN_MENU_ITEM_5_DESC "Run Mesh Validation" + #define MAIN_MENU_ITEM_5_GCODE "G26" //#define MAIN_MENU_ITEM_5_CONFIRM #endif diff --git a/config/examples/Formbot/T_Rex_2+/Configuration.h b/config/examples/Formbot/T_Rex_2+/Configuration.h index 78c2dc9160..feea5ca70b 100644 --- a/config/examples/Formbot/T_Rex_2+/Configuration.h +++ b/config/examples/Formbot/T_Rex_2+/Configuration.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Formbot/T_Rex_2+" + /** * Configuration.h * @@ -69,7 +71,7 @@ // @section info // Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes. +#define STRING_CONFIG_H_AUTHOR "Formbot-3D" // Who made the changes. //#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) /** @@ -87,10 +89,10 @@ #define SHOW_BOOTSCREEN // Show the bitmap in Marlin/_Bootscreen.h on startup. -//#define SHOW_CUSTOM_BOOTSCREEN +#define SHOW_CUSTOM_BOOTSCREEN // Show the bitmap in Marlin/_Statusscreen.h on the status screen. -//#define CUSTOM_STATUS_SCREEN_IMAGE +#define CUSTOM_STATUS_SCREEN_IMAGE // @section machine @@ -134,11 +136,11 @@ // Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_RAMPS_14_EFB + #define MOTHERBOARD BOARD_FORMBOT_TREX2PLUS #endif // Name displayed in the LCD "Ready" message and Info menu -//#define CUSTOM_MACHINE_NAME "3D Printer" +#define CUSTOM_MACHINE_NAME "T-Rex 2+ v15" // Printer's unique ID, used by some programs to differentiate between machines. // Choose your own or use a service like https://www.uuidgenerator.net/version4 @@ -148,7 +150,7 @@ // This defines the number of extruders // :[0, 1, 2, 3, 4, 5, 6, 7, 8] -#define EXTRUDERS 1 +#define EXTRUDERS 2 // Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc. #define DEFAULT_NOMINAL_FILAMENT_DIA 1.75 @@ -306,9 +308,9 @@ // Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing). // The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder). // For the other hotends it is their distance from the extruder 0 hotend. -//#define HOTEND_OFFSET_X { 0.0, 20.00 } // (mm) relative X-offset for each nozzle -//#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle -//#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle +#define HOTEND_OFFSET_X { 0.0, 434.6 } // (mm) relative X-offset for each nozzle +#define HOTEND_OFFSET_Y { 0.0, -0.50 } // (mm) relative Y-offset for each nozzle +#define HOTEND_OFFSET_Z { 0.0, 0.45 } // (mm) relative Z-offset for each nozzle // @section machine @@ -417,14 +419,14 @@ * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. */ #define TEMP_SENSOR_0 1 -#define TEMP_SENSOR_1 0 +#define TEMP_SENSOR_1 1 #define TEMP_SENSOR_2 0 #define TEMP_SENSOR_3 0 #define TEMP_SENSOR_4 0 #define TEMP_SENSOR_5 0 #define TEMP_SENSOR_6 0 #define TEMP_SENSOR_7 0 -#define TEMP_SENSOR_BED 0 +#define TEMP_SENSOR_BED 11 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 #define TEMP_SENSOR_COOLER 0 @@ -444,11 +446,11 @@ //#define TEMP_SENSOR_1_AS_REDUNDANT #define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10 -#define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 +#define TEMP_RESIDENCY_TIME 3 // (seconds) Time to wait for hotend to "settle" in M109 #define TEMP_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer #define TEMP_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target -#define TEMP_BED_RESIDENCY_TIME 10 // (seconds) Time to wait for bed to "settle" in M190 +#define TEMP_BED_RESIDENCY_TIME 3 // (seconds) Time to wait for bed to "settle" in M190 #define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer #define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target @@ -472,15 +474,15 @@ // Above this temperature the heater will be switched off. // This can protect components from overheating, but NOT from shorts and failures. // (Use MINTEMP for thermistor short/failure protection.) -#define HEATER_0_MAXTEMP 275 -#define HEATER_1_MAXTEMP 275 +#define HEATER_0_MAXTEMP 245 +#define HEATER_1_MAXTEMP 245 #define HEATER_2_MAXTEMP 275 #define HEATER_3_MAXTEMP 275 #define HEATER_4_MAXTEMP 275 #define HEATER_5_MAXTEMP 275 #define HEATER_6_MAXTEMP 275 #define HEATER_7_MAXTEMP 275 -#define BED_MAXTEMP 150 +#define BED_MAXTEMP 135 #define CHAMBER_MAXTEMP 60 /** @@ -500,26 +502,26 @@ // Comment the following line to disable PID and enable bang-bang. #define PIDTEMP -#define BANG_MAX 255 // Limits current to nozzle while in bang-bang mode; 255=full current +#define BANG_MAX 180 // Limits current to nozzle while in bang-bang mode; 255=full current #define PID_MAX BANG_MAX // Limits current to nozzle while PID is active (see PID_FUNCTIONAL_RANGE below); 255=full current #define PID_K1 0.95 // Smoothing factor within any PID loop #if ENABLED(PIDTEMP) - //#define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) - //#define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) - //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) + #define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) + #define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) + #define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) // Set/get with gcode: M301 E[extruder number, 0-2] #if ENABLED(PID_PARAMS_PER_HOTEND) // Specify between 1 and HOTENDS values per array. // If fewer than EXTRUDER values are provided, the last element will be repeated. - #define DEFAULT_Kp_LIST { 22.20, 22.20 } - #define DEFAULT_Ki_LIST { 1.08, 1.08 } - #define DEFAULT_Kd_LIST { 114.00, 114.00 } + #define DEFAULT_Kp_LIST { 19.38, 19.38 } + #define DEFAULT_Ki_LIST { 1.46, 1.46 } + #define DEFAULT_Kd_LIST { 64.31, 64.31 } #else - #define DEFAULT_Kp 22.20 - #define DEFAULT_Ki 1.08 - #define DEFAULT_Kd 114.00 + #define DEFAULT_Kp 19.38 + #define DEFAULT_Ki 1.46 + #define DEFAULT_Kd 64.31 #endif #endif // PIDTEMP @@ -540,7 +542,7 @@ * heater. If your configuration is significantly different than this and you don't understand * the issues involved, don't use bed PID until someone else verifies that your hardware works. */ -//#define PIDTEMPBED +#define PIDTEMPBED //#define BED_LIMIT_SWITCHING @@ -550,7 +552,7 @@ * When set to any value below 255, enables a form of PWM to the bed that acts like a divider * so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED) */ -#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current +#define MAX_BED_POWER 200 // limits duty cycle to bed; 255=full current #if ENABLED(PIDTEMPBED) //#define MIN_BED_POWER 0 @@ -558,9 +560,10 @@ // 120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) // from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) - #define DEFAULT_bedKp 10.00 - #define DEFAULT_bedKi .023 - #define DEFAULT_bedKd 305.4 + + #define DEFAULT_bedKp 289.73 + #define DEFAULT_bedKi 51.26 + #define DEFAULT_bedKd 409.43 // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. #endif // PIDTEMPBED @@ -613,7 +616,7 @@ //#define PID_DEBUG // Sends debug data to the serial port. Use 'M303 D' to toggle activation. //#define PID_OPENLOOP // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX //#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay - #define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature + #define PID_FUNCTIONAL_RANGE 8 // If the temperature difference between the target temperature and the actual temperature // is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max. #endif @@ -655,7 +658,7 @@ #define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders #define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed -#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber +//#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber #define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling //=========================================================================== @@ -684,10 +687,10 @@ // Almost all printers will be using one per axis. Probes will use one or more of the // extra connectors. Leave undefined any used for non-endstop and non-probe purposes. #define USE_XMIN_PLUG -#define USE_YMIN_PLUG +//#define USE_YMIN_PLUG #define USE_ZMIN_PLUG -//#define USE_XMAX_PLUG -//#define USE_YMAX_PLUG +#define USE_XMAX_PLUG +#define USE_YMAX_PLUG //#define USE_ZMAX_PLUG // Enable pullup for all endstops to prevent a floating state @@ -718,11 +721,11 @@ // Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). #define X_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. +#define Y_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Z_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. #define X_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. +#define Y_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Z_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. #define Z_MIN_PROBE_ENDSTOP_INVERTING false // Set to true to invert the logic of the probe. /** @@ -746,13 +749,13 @@ #define X_DRIVER_TYPE A4988 #define Y_DRIVER_TYPE A4988 #define Z_DRIVER_TYPE A4988 -//#define X2_DRIVER_TYPE A4988 +#define X2_DRIVER_TYPE A4988 //#define Y2_DRIVER_TYPE A4988 //#define Z2_DRIVER_TYPE A4988 //#define Z3_DRIVER_TYPE A4988 //#define Z4_DRIVER_TYPE A4988 #define E0_DRIVER_TYPE A4988 -//#define E1_DRIVER_TYPE A4988 +#define E1_DRIVER_TYPE A4988 //#define E2_DRIVER_TYPE A4988 //#define E3_DRIVER_TYPE A4988 //#define E4_DRIVER_TYPE A4988 @@ -806,18 +809,18 @@ * Override with M92 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 500 } +#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 160, 1600, (93*2) } /** * Default Max Feed Rate (mm/s) * Override with M203 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 } +#define DEFAULT_MAX_FEEDRATE { 200, 100, 5, 25 } //#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 #if ENABLED(LIMITED_MAX_FR_EDITING) - #define MAX_FEEDRATE_EDIT_VALUES { 600, 600, 10, 50 } // ...or, set your own edit limits + #define MAX_FEEDRATE_EDIT_VALUES { 600, 300, 20, 50 } // ...or, set your own edit limits #endif /** @@ -826,11 +829,11 @@ * Override with M201 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 } +#define DEFAULT_MAX_ACCELERATION { 1500, 500, 400, 3500 } //#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 #if ENABLED(LIMITED_MAX_ACCEL_EDITING) - #define MAX_ACCEL_EDIT_VALUES { 6000, 6000, 200, 20000 } // ...or, set your own edit limits + #define MAX_ACCEL_EDIT_VALUES { 6000, 6000, 600, 20000 } // ...or, set your own edit limits #endif /** @@ -841,9 +844,9 @@ * M204 R Retract Acceleration * M204 T Travel Acceleration */ -#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves +#define DEFAULT_ACCELERATION 1500 // X, Y, Z and E acceleration for printing moves +#define DEFAULT_RETRACT_ACCELERATION 1500 // E acceleration for retracts +#define DEFAULT_TRAVEL_ACCELERATION 1500 // X, Y, Z acceleration for travel (non printing) moves /** * Default Jerk limits (mm/s) @@ -856,8 +859,8 @@ //#define CLASSIC_JERK #if ENABLED(CLASSIC_JERK) #define DEFAULT_XJERK 10.0 - #define DEFAULT_YJERK 10.0 - #define DEFAULT_ZJERK 0.3 + #define DEFAULT_YJERK 5.0 + #define DEFAULT_ZJERK 0.4 //#define TRAVEL_EXTRA_XYJERK 0.0 // Additional jerk allowance for all travel moves @@ -963,7 +966,7 @@ /** * The BLTouch probe uses a Hall effect sensor and emulates a servo. */ -//#define BLTOUCH +#define BLTOUCH /** * Touch-MI Probe by hotends.fr @@ -1055,14 +1058,14 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +#define NOZZLE_TO_PROBE_OFFSET { 24, 30, -2.00 } // Most probes should stay away from the edges of the bed, but // with NOZZLE_AS_PROBE this can be negative for a wider probing area. -#define PROBING_MARGIN 10 +#define PROBING_MARGIN 0 // X and Y axis travel speed (mm/min) between probes -#define XY_PROBE_FEEDRATE (133*60) +#define XY_PROBE_FEEDRATE (83*60) // Feedrate (mm/min) for the first approach when double-probing (MULTIPLE_PROBING == 2) #define Z_PROBE_FEEDRATE_FAST (4*60) @@ -1106,7 +1109,7 @@ * A total of 2 does fast/slow probes with a weighted average. * A total of 3 or more adds more slow probes, taking the average. */ -//#define MULTIPLE_PROBING 2 +#define MULTIPLE_PROBING 2 //#define EXTRA_PROBING 1 /** @@ -1123,19 +1126,18 @@ * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. */ -#define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow -#define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points +#define Z_CLEARANCE_DEPLOY_PROBE 7 // Z Clearance for Deploy/Stow +#define Z_CLEARANCE_BETWEEN_PROBES 7 // Z Clearance between probe points #define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes -//#define Z_AFTER_PROBING 5 // Z position after probing is done - -#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping +#define Z_AFTER_PROBING 7 // Z position after probing is done +#define Z_PROBE_LOW_POINT -3 // Farthest distance below the trigger-point to go before stopping // For M851 give a range for adjusting the Z probe offset #define Z_PROBE_OFFSET_RANGE_MIN -20 #define Z_PROBE_OFFSET_RANGE_MAX 20 // Enable the M48 repeatability test to test probe accuracy -//#define Z_MIN_PROBE_REPEATABILITY_TEST +#define Z_MIN_PROBE_REPEATABILITY_TEST // Before deploy/stow pause for user confirmation //#define PAUSE_BEFORE_DEPLOY_STOW @@ -1185,19 +1187,19 @@ // @section extruder #define DISABLE_E false // Disable the extruder when not stepping -#define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled +#define DISABLE_INACTIVE_EXTRUDER false // Keep only the active extruder enabled. // @section machine // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR false -#define INVERT_Y_DIR true -#define INVERT_Z_DIR false + #define INVERT_Y_DIR false + #define INVERT_Z_DIR true // @section extruder // For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR false +#define INVERT_E0_DIR true #define INVERT_E1_DIR false #define INVERT_E2_DIR false #define INVERT_E3_DIR false @@ -1218,7 +1220,7 @@ */ //#define Z_IDLE_HEIGHT Z_HOME_POS -//#define Z_HOMING_HEIGHT 4 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ... +#define Z_HOMING_HEIGHT 8 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ... // Be sure to have this much clearance over your Z_MAX_POS to prevent grinding. //#define Z_AFTER_HOMING 10 // (mm) Height to move to after homing Z @@ -1226,22 +1228,22 @@ // Direction of endstops when homing; 1=MAX, -1=MIN // :[-1,1] #define X_HOME_DIR -1 -#define Y_HOME_DIR -1 +#define Y_HOME_DIR 1 #define Z_HOME_DIR -1 // @section machine // The size of the printable area -#define X_BED_SIZE 200 -#define Y_BED_SIZE 200 +#define X_BED_SIZE 400 +#define Y_BED_SIZE 400 // Travel limits (mm) after homing, corresponding to endstop positions. -#define X_MIN_POS 0 +#define X_MIN_POS -47 #define Y_MIN_POS 0 #define Z_MIN_POS 0 -#define X_MAX_POS X_BED_SIZE +#define X_MAX_POS 460 #define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 200 +#define Z_MAX_POS 700 /** * Software Endstops @@ -1257,7 +1259,7 @@ #if ENABLED(MIN_SOFTWARE_ENDSTOPS) #define MIN_SOFTWARE_ENDSTOP_X #define MIN_SOFTWARE_ENDSTOP_Y - #define MIN_SOFTWARE_ENDSTOP_Z +//#define MIN_SOFTWARE_ENDSTOP_Z #endif // Max software endstops constrain movement within maximum coordinate bounds @@ -1269,7 +1271,7 @@ #endif #if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS) - //#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD + #define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD #endif /** @@ -1388,7 +1390,7 @@ //#define AUTO_BED_LEVELING_3POINT //#define AUTO_BED_LEVELING_LINEAR //#define AUTO_BED_LEVELING_BILINEAR -//#define AUTO_BED_LEVELING_UBL +#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING /** @@ -1396,7 +1398,7 @@ * these options to restore the prior leveling state or to always enable * leveling immediately after G28. */ -//#define RESTORE_LEVELING_AFTER_G28 +#define RESTORE_LEVELING_AFTER_G28 //#define ENABLE_LEVELING_AFTER_G28 /** @@ -1432,13 +1434,13 @@ // For Cartesian machines, instead of dividing moves on mesh boundaries, // split up moves into short segments like a Delta. This follows the // contours of the bed more closely than edge-to-edge straight moves. - #define SEGMENT_LEVELED_MOVES - #define LEVELED_SEGMENT_LENGTH 5.0 // (mm) Length of all segments (except the last one) + //#define SEGMENT_LEVELED_MOVES + //#define LEVELED_SEGMENT_LENGTH 5.0 // (mm) Length of all segments (except the last one) /** * Enable the G26 Mesh Validation Pattern tool. */ - //#define G26_MESH_VALIDATION + #define G26_MESH_VALIDATION #if ENABLED(G26_MESH_VALIDATION) #define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle. #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for G26. @@ -1484,10 +1486,10 @@ //========================= Unified Bed Leveling ============================ //=========================================================================== - //#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh + #define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh - #define MESH_INSET 1 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. + #define MESH_INSET 35 // Set Mesh bounds as an inset region of the bed + #define GRID_MAX_POINTS_X 8 // Don't use more than 15 points per axis, implementation limited. #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X //#define UBL_HILBERT_CURVE // Use Hilbert distribution for less travel when probing multiple points @@ -1495,7 +1497,7 @@ #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 - //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used + #define UBL_Z_RAISE_WHEN_OFF_MESH 0.0 // When the nozzle is off the mesh, this value is used // as the Z-Height correction value. //#define UBL_MESH_WIZARD // Run several commands in a row to get a complete mesh @@ -1506,7 +1508,7 @@ //=================================== Mesh ================================== //=========================================================================== - #define MESH_INSET 10 // Set Mesh bounds as an inset region of the bed + #define MESH_INSET 3 // Set Mesh bounds as an inset region of the bed #define GRID_MAX_POINTS_X 3 // Don't use more than 7 points per axis, implementation limited. #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X @@ -1527,7 +1529,7 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS +#define LEVEL_BED_CORNERS #if ENABLED(LEVEL_BED_CORNERS) #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets @@ -1565,7 +1567,7 @@ * Commands to execute at the end of G29 probing. * Useful to retract or move the Z probe out of the way. */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" +#define Z_PROBE_END_SCRIPT "M280 P0 S90" // @section homing @@ -1576,7 +1578,7 @@ // For DELTA this is the top-center of the Cartesian print volume. //#define MANUAL_X_HOME_POS 0 //#define MANUAL_Y_HOME_POS 0 -//#define MANUAL_Z_HOME_POS 0 +#define MANUAL_Z_HOME_POS 0 // Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area. // @@ -1587,7 +1589,7 @@ // - Move the Z probe (or nozzle) to a defined XY point before Z Homing. // - Prevent Z homing when the Z probe is outside bed area. // -//#define Z_SAFE_HOMING +#define Z_SAFE_HOMING #if ENABLED(Z_SAFE_HOMING) #define Z_SAFE_HOMING_X_POINT X_CENTER // X point for Z homing @@ -1672,7 +1674,7 @@ * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) */ -//#define EEPROM_SETTINGS // Persistent storage with M500 and M501 +#define EEPROM_SETTINGS // Persistent storage with M500 and M501 //#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. #define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load @@ -1686,8 +1688,8 @@ // When enabled Marlin will send a busy status message to the host // every couple of seconds when it can't accept commands. // -#define HOST_KEEPALIVE_FEATURE // Disable this if your host doesn't like keepalive messages -#define DEFAULT_KEEPALIVE_INTERVAL 2 // Number of seconds between "busy" messages. Set with M113. +//#define HOST_KEEPALIVE_FEATURE // Disable this if your host doesn't like keepalive messages +#define DEFAULT_KEEPALIVE_INTERVAL 5 // Number of seconds between "busy" messages. Set with M113. #define BUSY_WHILE_HEATING // Some hosts require "busy" messages even during heating // @@ -1707,15 +1709,15 @@ // #define PREHEAT_1_LABEL "PLA" #define PREHEAT_1_TEMP_HOTEND 180 -#define PREHEAT_1_TEMP_BED 70 +#define PREHEAT_1_TEMP_BED 60 #define PREHEAT_1_TEMP_CHAMBER 35 -#define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 +#define PREHEAT_1_FAN_SPEED 125 // Value from 0 to 255 #define PREHEAT_2_LABEL "ABS" -#define PREHEAT_2_TEMP_HOTEND 240 +#define PREHEAT_2_TEMP_HOTEND 220 #define PREHEAT_2_TEMP_BED 110 #define PREHEAT_2_TEMP_CHAMBER 35 -#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 +#define PREHEAT_2_FAN_SPEED 125 // Value from 0 to 255 /** * Nozzle Park @@ -1728,15 +1730,15 @@ * P1 Raise the nozzle always to Z-park height. * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. */ -//#define NOZZLE_PARK_FEATURE +#define NOZZLE_PARK_FEATURE #if ENABLED(NOZZLE_PARK_FEATURE) // Specify a park position as { X, Y, Z_raise } - #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 } + #define NOZZLE_PARK_POINT { (50), (Y_MAX_POS - 30), 20 } //#define NOZZLE_PARK_X_ONLY // X move only is required to park //#define NOZZLE_PARK_Y_ONLY // Y move only is required to park #define NOZZLE_PARK_Z_RAISE_MIN 2 // (mm) Always raise Z by at least this distance - #define NOZZLE_PARK_XY_FEEDRATE 100 // (mm/s) X and Y axes feedrate (also used for delta Z axis) + #define NOZZLE_PARK_XY_FEEDRATE 75 // (mm/s) X and Y axes feedrate (also used for delta Z axis) #define NOZZLE_PARK_Z_FEEDRATE 5 // (mm/s) Z axis feedrate (not used for delta printers) #endif @@ -1921,7 +1923,7 @@ * * :['JAPANESE', 'WESTERN', 'CYRILLIC'] */ -#define DISPLAY_CHARSET_HD44780 JAPANESE +#define DISPLAY_CHARSET_HD44780 WESTERN /** * Info Screen Style (0:Classic, 1:Průša) @@ -1936,7 +1938,7 @@ * SD Card support is disabled by default. If your controller has an SD slot, * you must uncomment the following option or it won't work. */ -//#define SDSUPPORT +#define SDSUPPORT /** * SD CARD: ENABLE CRC @@ -2006,7 +2008,7 @@ // // Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. // -//#define INDIVIDUAL_AXIS_HOMING_MENU +#define INDIVIDUAL_AXIS_HOMING_MENU // // SPEAKER/BUZZER @@ -2195,7 +2197,7 @@ // RepRapDiscount FULL GRAPHIC Smart Controller // https://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller // -//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER +#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER // // K.3D Full Graphic Smart Controller diff --git a/config/examples/Formbot/T_Rex_2+/Configuration_adv.h b/config/examples/Formbot/T_Rex_2+/Configuration_adv.h index 5335fa012a..75f0f1179c 100644 --- a/config/examples/Formbot/T_Rex_2+/Configuration_adv.h +++ b/config/examples/Formbot/T_Rex_2+/Configuration_adv.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Formbot/T_Rex_2+" + /** * Configuration_adv.h * @@ -238,8 +240,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 60 // Seconds + #define THERMAL_PROTECTION_HYSTERESIS 10 // Degrees Celsius //#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops #if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP) @@ -258,7 +260,7 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 20 // Seconds + #define WATCH_TEMP_PERIOD 60 // Seconds #define WATCH_TEMP_INCREASE 2 // Degrees Celsius #endif @@ -266,8 +268,8 @@ * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 60 // Seconds + #define THERMAL_PROTECTION_BED_HYSTERESIS 5 // Degrees Celsius /** * As described above, except for the bed (M140/M190/M303). @@ -479,7 +481,7 @@ // When first starting the main fan, run it at full speed for the // given number of milliseconds. This gets the fan spinning reliably // before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) -//#define FAN_KICKSTART_TIME 100 +#define FAN_KICKSTART_TIME 100 // Some coolers may require a non-zero "off" state. //#define FAN_OFF_PWM 1 @@ -496,7 +498,7 @@ * * Define one or both of these to override the default 0-255 range. */ -//#define FAN_MIN_PWM 50 +#define FAN_MIN_PWM 45 //#define FAN_MAX_PWM 128 /** @@ -573,15 +575,15 @@ /** * M355 Case Light on-off / brightness */ -//#define CASE_LIGHT_ENABLE +#define CASE_LIGHT_ENABLE #if ENABLED(CASE_LIGHT_ENABLE) - //#define CASE_LIGHT_PIN 4 // Override the default pin if needed + #define CASE_LIGHT_PIN 8 #define INVERT_CASE_LIGHT false // Set true if Case Light is ON when pin is LOW #define CASE_LIGHT_DEFAULT_ON true // Set default power-up state on - #define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // Set default power-up brightness (0-255, requires PWM pin) + #define CASE_LIGHT_DEFAULT_BRIGHTNESS 20 // Set default power-up brightness (0-255, requires PWM pin) //#define CASE_LIGHT_NO_BRIGHTNESS // Disable brightness control. Enable for non-PWM lighting. //#define CASE_LIGHT_MAX_PWM 128 // Limit PWM duty cycle (0-255) - //#define CASE_LIGHT_MENU // Add Case Light options to the LCD menu + #define CASE_LIGHT_MENU // Add Case Light options to the LCD menu #if ENABLED(NEOPIXEL_LED) //#define CASE_LIGHT_USE_NEOPIXEL // Use NeoPixel LED as case light #endif @@ -699,12 +701,12 @@ * Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and * follow with M605 S3 to initiate mirrored movement. */ -//#define DUAL_X_CARRIAGE +#define DUAL_X_CARRIAGE #if ENABLED(DUAL_X_CARRIAGE) #define X1_MIN_POS X_MIN_POS // Set to X_MIN_POS - #define X1_MAX_POS X_BED_SIZE // Set a maximum so the first X-carriage can't hit the parked second X-carriage - #define X2_MIN_POS 80 // Set a minimum to ensure the second X-carriage can't hit the parked first X-carriage - #define X2_MAX_POS 353 // Set this to the distance between toolheads when both heads are homed + #define X1_MAX_POS (X_BED_SIZE)// Set a maximum so the first X-carriage can't hit the parked second X-carriage + #define X2_MIN_POS 0 // Set a minimum to ensure the second X-carriage can't hit the parked first X-carriage + #define X2_MAX_POS (434.6) // Set this to the distance between toolheads when both heads are homed #define X2_HOME_DIR 1 // Set to 1. The second X-carriage always homes to the maximum endstop position #define X2_HOME_POS X2_MAX_POS // Default X2 home position. Set to X2_MAX_POS. // However: In this mode the HOTEND_OFFSET_X value for the second extruder provides a software @@ -716,7 +718,7 @@ #define DEFAULT_DUAL_X_CARRIAGE_MODE DXC_AUTO_PARK_MODE // Default x offset in duplication mode (typically set to half print bed width) - #define DEFAULT_DUPLICATION_X_OFFSET 100 + #define DEFAULT_DUPLICATION_X_OFFSET 200 // Default action to execute following M605 mode change commands. Typically G28X to apply new mode. //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" @@ -741,7 +743,7 @@ //#define HOMING_BACKOFF_POST_MM { 2, 2, 2 } // (mm) Backoff from endstops after homing -//#define QUICK_HOME // If G28 contains XY do a diagonal move first +#define QUICK_HOME // If G28 contains XY do a diagonal move first //#define HOME_Y_BEFORE_X // If G28 contains XY home Y before X //#define HOME_Z_FIRST // Home Z first. Requires a Z-MIN endstop (not a probe). //#define CODEPENDENT_XY_HOMING // If X/Y can't home without homing Y/X first @@ -925,7 +927,7 @@ * Set DISABLE_INACTIVE_? 'true' to shut down axis steppers after an idle period. * The Deactive Time can be overridden with M18 and M84. Set to 0 for No Timeout. */ -#define DEFAULT_STEPPER_DEACTIVE_TIME 120 +#define DEFAULT_STEPPER_DEACTIVE_TIME 600 #define DISABLE_INACTIVE_X true #define DISABLE_INACTIVE_Y true #define DISABLE_INACTIVE_Z true // Set 'false' if the nozzle could fall onto your printed part! @@ -1181,7 +1183,7 @@ #endif // BACK menu items keep the highlight at the top - //#define TURBO_BACK_MENU_ITEM + #define TURBO_BACK_MENU_ITEM // Add a mute option to the LCD menu //#define SOUND_MENU_ITEM @@ -1219,7 +1221,7 @@ #if HAS_DISPLAY // The timeout (in ms) to return to the status screen from sub-menus - //#define LCD_TIMEOUT_TO_STATUS 15000 + #define LCD_TIMEOUT_TO_STATUS 10000 #if ENABLED(SHOW_BOOTSCREEN) #define BOOTSCREEN_TIMEOUT 4000 // (ms) Total Duration to display the boot screen(s) @@ -1229,13 +1231,13 @@ #endif // Scroll a longer status message into view - //#define STATUS_MESSAGE_SCROLLING + #define STATUS_MESSAGE_SCROLLING // On the Info Screen, display XY with one decimal place when possible - //#define LCD_DECIMAL_SMALL_XY + #define LCD_DECIMAL_SMALL_XY // Add an 'M73' G-code to set the current percentage - //#define LCD_SET_PROGRESS_MANUALLY + #define LCD_SET_PROGRESS_MANUALLY // Show the E position (filament used) during printing //#define LCD_SHOW_E_TOTAL @@ -1278,7 +1280,7 @@ // The standard SD detect circuit reads LOW when media is inserted and HIGH when empty. // Enable this option and set to HIGH if your SD cards are incorrectly detected. - //#define SD_DETECT_STATE HIGH + #define SD_DETECT_STATE (HIGH) //#define SD_IGNORE_AT_STARTUP // Don't mount the SD card when starting up //#define SDCARD_READONLY // Read-only SD card (to save over 2K of flash) @@ -1365,9 +1367,9 @@ // SD Card Sorting options #if ENABLED(SDCARD_SORT_ALPHA) - #define SDSORT_LIMIT 40 // Maximum number of sorted items (10-256). Costs 27 bytes each. + #define SDSORT_LIMIT 10 // Maximum number of sorted items (10-256). Costs 27 bytes each. #define FOLDER_SORTING -1 // -1=above 0=none 1=below - #define SDSORT_GCODE false // Allow turning sorting on/off with LCD and M34 G-code. + #define SDSORT_GCODE true // Allow turning sorting on/off with LCD and M34 G-code. #define SDSORT_USES_RAM false // Pre-allocate a static array for faster pre-sorting. #define SDSORT_USES_STACK false // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.) #define SDSORT_CACHE_NAMES false // Keep sorted items in RAM longer for speedy performance. Most expensive option. @@ -1381,10 +1383,10 @@ //#define UTF_FILENAME_SUPPORT // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT + #define LONG_FILENAME_HOST_SUPPORT // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES + #define SCROLL_LONG_FILENAMES // Leave the heaters on after Stop Print (not recommended!) //#define SD_ABORT_NO_COOLDOWN @@ -1406,7 +1408,7 @@ /** * Auto-report SdCard status with M27 S */ - //#define AUTO_REPORT_SD_STATUS + #define AUTO_REPORT_SD_STATUS /** * Support for USB thumb drives using an Arduino USB Host Shield or @@ -1523,7 +1525,7 @@ // A bigger font is available for edit items. Costs 3120 bytes of PROGMEM. // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. - //#define USE_BIG_EDIT_FONT + #define USE_BIG_EDIT_FONT // A smaller font may be used on the Info Screen. Costs 2434 bytes of PROGMEM. // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. @@ -1790,18 +1792,18 @@ * * Warning: Does not respect endstops! */ -//#define BABYSTEPPING +#define BABYSTEPPING #if ENABLED(BABYSTEPPING) //#define INTEGRATED_BABYSTEPPING // EXPERIMENTAL integration of babystepping into the Stepper ISR - //#define BABYSTEP_WITHOUT_HOMING - //#define BABYSTEP_ALWAYS_AVAILABLE // Allow babystepping at all times (not just during movement). - //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! + #define BABYSTEP_WITHOUT_HOMING + #define BABYSTEP_ALWAYS_AVAILABLE // Allow babystepping at all times (not just during movement). + #define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way //#define BABYSTEP_MILLIMETER_UNITS // Specify BABYSTEP_MULTIPLICATOR_(XY|Z) in mm instead of micro-steps - #define BABYSTEP_MULTIPLICATOR_Z 1 // (steps or mm) Steps or millimeter distance for each Z babystep - #define BABYSTEP_MULTIPLICATOR_XY 1 // (steps or mm) Steps or millimeter distance for each XY babystep + #define BABYSTEP_MULTIPLICATOR_Z 40 // (steps or mm) Steps or millimeter distance for each Z babystep + #define BABYSTEP_MULTIPLICATOR_XY 40 // (steps or mm) Steps or millimeter distance for each Z babystep - //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. + #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. // Note: Extra time may be added to mitigate controller latency. @@ -1852,12 +1854,12 @@ * Override if the automatically selected points are inadequate. */ #if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL) - //#define PROBE_PT_1_X 15 - //#define PROBE_PT_1_Y 180 - //#define PROBE_PT_2_X 15 - //#define PROBE_PT_2_Y 20 - //#define PROBE_PT_3_X 170 - //#define PROBE_PT_3_Y 20 + #define PROBE_PT_1_X 35 + #define PROBE_PT_1_Y 365 + #define PROBE_PT_2_X 35 + #define PROBE_PT_2_Y 35 + #define PROBE_PT_3_X 365 + #define PROBE_PT_3_Y 35 #endif /** @@ -2311,28 +2313,28 @@ * * Enable PARK_HEAD_ON_PAUSE to add the G-code M125 Pause and Park. */ -//#define ADVANCED_PAUSE_FEATURE +#define ADVANCED_PAUSE_FEATURE #if ENABLED(ADVANCED_PAUSE_FEATURE) #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. - #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. + #define PAUSE_PARK_RETRACT_LENGTH 4 // (mm) Initial retract. // This short retract is done immediately, before parking the nozzle. - #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast. + #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 41 // (mm/s) Unload filament feedrate. This can be pretty fast. #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload. + #define FILAMENT_CHANGE_UNLOAD_LENGTH 50 // (mm) The length of filament for a complete unload. // For Bowden, the full length of the tube and nozzle. // For direct drive, the full length of the nozzle. // Set to 0 for manual unloading. #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE 6 // (mm/s) Slow move when starting load. #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 0 // (mm) Slow length, to allow time to insert material. // 0 to disable start loading and skip to fast load only - #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast. + #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 30 // (mm/s) Load filament feedrate. This can be pretty fast. #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle. + #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 50 // (mm) Load length of filament, from extruder gear to nozzle. // For Bowden, the full length of the tube and nozzle. // For direct drive, the full length of the nozzle. //#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted. #define ADVANCED_PAUSE_PURGE_FEEDRATE 3 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate. - #define ADVANCED_PAUSE_PURGE_LENGTH 50 // (mm) Length to extrude after loading. + #define ADVANCED_PAUSE_PURGE_LENGTH 20 // (mm) Length to extrude after loading. // Set to 0 for manual extrusion. // Filament can be extruded repeatedly from the Filament Change menu // until extrusion is consistent, and to purge old filament. @@ -2340,13 +2342,13 @@ //#define ADVANCED_PAUSE_FANS_PAUSE // Turn off print-cooling fans while the machine is paused. // Filament Unload does a Retract, Delay, and Purge first: - #define FILAMENT_UNLOAD_PURGE_RETRACT 13 // (mm) Unload initial retract length. - #define FILAMENT_UNLOAD_PURGE_DELAY 5000 // (ms) Delay for the filament to cool after retract. - #define FILAMENT_UNLOAD_PURGE_LENGTH 8 // (mm) An unretract is done, then this length is purged. + #define FILAMENT_UNLOAD_PURGE_RETRACT 0 // (mm) Unload initial retract length. + #define FILAMENT_UNLOAD_PURGE_DELAY 500 // (ms) Delay for the filament to cool after retract. + #define FILAMENT_UNLOAD_PURGE_LENGTH 0 // (mm) An unretract is done, then this length is purged. #define FILAMENT_UNLOAD_PURGE_FEEDRATE 25 // (mm/s) feedrate to purge before unload - #define PAUSE_PARK_NOZZLE_TIMEOUT 45 // (seconds) Time limit before the nozzle is turned off for safety. - #define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed. + #define PAUSE_PARK_NOZZLE_TIMEOUT (3*60) // (seconds) Time limit before the nozzle is turned off for safety. + #define FILAMENT_CHANGE_ALERT_BEEPS 3 // Number of alert beeps to play when a response is needed. #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change. //#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. @@ -3474,7 +3476,7 @@ //#define NO_WORKSPACE_OFFSETS // Extra options for the M114 "Current Position" report -//#define M114_DETAIL // Use 'M114` for details to check planner calculations +#define M114_DETAIL // Use 'M114` for details to check planner calculations //#define M114_REALTIME // Real current position based on forward kinematics //#define M114_LEGACY // M114 used to synchronize on every call. Enable if needed. @@ -3487,7 +3489,7 @@ * For clients that use a fixed-width font (like OctoPrint), leave this set to 1.0. * Otherwise, adjust according to your client and font. */ -#define PROPORTIONAL_FONT_RATIO 1.0 +#define PROPORTIONAL_FONT_RATIO 1.5 /** * Spend 28 bytes of SRAM to optimize the G-code parser @@ -3804,16 +3806,16 @@ */ //#define MAX7219_DEBUG #if ENABLED(MAX7219_DEBUG) - #define MAX7219_CLK_PIN 64 - #define MAX7219_DIN_PIN 57 - #define MAX7219_LOAD_PIN 44 + #define MAX7219_CLK_PIN 41 + #define MAX7219_DIN_PIN 13 + #define MAX7219_LOAD_PIN 37 - //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix + #define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix #define MAX7219_INIT_TEST 2 // Test pattern at startup: 0=none, 1=sweep, 2=spiral - #define MAX7219_NUMBER_UNITS 1 // Number of Max7219 units in chain. + #define MAX7219_NUMBER_UNITS 3 // Number of Max7219 units in chain. #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) // connector at: right=0 bottom=-90 top=90 left=180 - //#define MAX7219_REVERSE_ORDER // The individual LED matrix units may be in reversed order + #define MAX7219_REVERSE_ORDER // The individual LED matrix units may be in reversed order //#define MAX7219_SIDE_BY_SIDE // Big chip+matrix boards can be chained side-by-side /** @@ -3821,10 +3823,10 @@ * If you add more debug displays, be careful to avoid conflicts! */ #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning - #define MAX7219_DEBUG_PLANNER_HEAD 3 // Show the planner queue head position on this and the next LED matrix row - #define MAX7219_DEBUG_PLANNER_TAIL 5 // Show the planner queue tail position on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_HEAD 5 // Show the planner queue head position on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_TAIL 6 // Show the planner queue tail position on this and the next LED matrix row - #define MAX7219_DEBUG_PLANNER_QUEUE 0 // Show the current planner queue depth on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_QUEUE 7 // Show the current planner queue depth on this and the next LED matrix row // If you experience stuttering, reboots, etc. this option can reveal how // tweaks made to the configuration are affecting the printer in real-time. #endif @@ -3992,7 +3994,7 @@ // // M100 Free Memory Watcher to debug memory usage // -//#define M100_FREE_MEMORY_WATCHER +#define M100_FREE_MEMORY_WATCHER // // M42 - Set pin states diff --git a/config/examples/Formbot/T_Rex_3/Configuration.h b/config/examples/Formbot/T_Rex_3/Configuration.h index 78c2dc9160..d3462eca69 100644 --- a/config/examples/Formbot/T_Rex_3/Configuration.h +++ b/config/examples/Formbot/T_Rex_3/Configuration.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Formbot/T_Rex_3" + /** * Configuration.h * @@ -66,10 +68,13 @@ // //=========================================================================== +#define ICSP_PORT_SWITCHES // If ICSP_PORT_SWITCHES is defined, those pins become filament runout sensors + // (But the SD Memory card won't work and is turned off!!!) + // @section info // Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes. +#define STRING_CONFIG_H_AUTHOR "Formbot-3D" // Who made the changes. //#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) /** @@ -87,10 +92,10 @@ #define SHOW_BOOTSCREEN // Show the bitmap in Marlin/_Bootscreen.h on startup. -//#define SHOW_CUSTOM_BOOTSCREEN +#define SHOW_CUSTOM_BOOTSCREEN // Show the bitmap in Marlin/_Statusscreen.h on the status screen. -//#define CUSTOM_STATUS_SCREEN_IMAGE +#define CUSTOM_STATUS_SCREEN_IMAGE // @section machine @@ -134,11 +139,11 @@ // Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_RAMPS_14_EFB + #define MOTHERBOARD BOARD_FORMBOT_TREX3 #endif // Name displayed in the LCD "Ready" message and Info menu -//#define CUSTOM_MACHINE_NAME "3D Printer" +#define CUSTOM_MACHINE_NAME "T-Rex 3" // Printer's unique ID, used by some programs to differentiate between machines. // Choose your own or use a service like https://www.uuidgenerator.net/version4 @@ -148,7 +153,7 @@ // This defines the number of extruders // :[0, 1, 2, 3, 4, 5, 6, 7, 8] -#define EXTRUDERS 1 +#define EXTRUDERS 2 // Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc. #define DEFAULT_NOMINAL_FILAMENT_DIA 1.75 @@ -417,14 +422,14 @@ * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. */ #define TEMP_SENSOR_0 1 -#define TEMP_SENSOR_1 0 +#define TEMP_SENSOR_1 1 #define TEMP_SENSOR_2 0 #define TEMP_SENSOR_3 0 #define TEMP_SENSOR_4 0 #define TEMP_SENSOR_5 0 #define TEMP_SENSOR_6 0 #define TEMP_SENSOR_7 0 -#define TEMP_SENSOR_BED 0 +#define TEMP_SENSOR_BED 11 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 #define TEMP_SENSOR_COOLER 0 @@ -472,7 +477,7 @@ // Above this temperature the heater will be switched off. // This can protect components from overheating, but NOT from shorts and failures. // (Use MINTEMP for thermistor short/failure protection.) -#define HEATER_0_MAXTEMP 275 +#define HEATER_0_MAXTEMP 410 #define HEATER_1_MAXTEMP 275 #define HEATER_2_MAXTEMP 275 #define HEATER_3_MAXTEMP 275 @@ -505,11 +510,12 @@ #define PID_K1 0.95 // Smoothing factor within any PID loop #if ENABLED(PIDTEMP) - //#define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) - //#define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) + #define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) + #define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) // Set/get with gcode: M301 E[extruder number, 0-2] + // Based on T-Rex 2+ #if ENABLED(PID_PARAMS_PER_HOTEND) // Specify between 1 and HOTENDS values per array. // If fewer than EXTRUDER values are provided, the last element will be repeated. @@ -540,7 +546,7 @@ * heater. If your configuration is significantly different than this and you don't understand * the issues involved, don't use bed PID until someone else verifies that your hardware works. */ -//#define PIDTEMPBED +#define PIDTEMPBED //#define BED_LIMIT_SWITCHING @@ -684,10 +690,10 @@ // Almost all printers will be using one per axis. Probes will use one or more of the // extra connectors. Leave undefined any used for non-endstop and non-probe purposes. #define USE_XMIN_PLUG -#define USE_YMIN_PLUG +//#define USE_YMIN_PLUG #define USE_ZMIN_PLUG -//#define USE_XMAX_PLUG -//#define USE_YMAX_PLUG +#define USE_XMAX_PLUG +#define USE_YMAX_PLUG //#define USE_ZMAX_PLUG // Enable pullup for all endstops to prevent a floating state @@ -718,11 +724,11 @@ // Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). #define X_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. +#define Y_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Z_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. #define X_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. +#define Y_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Z_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. #define Z_MIN_PROBE_ENDSTOP_INVERTING false // Set to true to invert the logic of the probe. /** @@ -746,13 +752,13 @@ #define X_DRIVER_TYPE A4988 #define Y_DRIVER_TYPE A4988 #define Z_DRIVER_TYPE A4988 -//#define X2_DRIVER_TYPE A4988 +#define X2_DRIVER_TYPE A4988 //#define Y2_DRIVER_TYPE A4988 //#define Z2_DRIVER_TYPE A4988 //#define Z3_DRIVER_TYPE A4988 //#define Z4_DRIVER_TYPE A4988 #define E0_DRIVER_TYPE A4988 -//#define E1_DRIVER_TYPE A4988 +#define E1_DRIVER_TYPE A4988 //#define E2_DRIVER_TYPE A4988 //#define E3_DRIVER_TYPE A4988 //#define E4_DRIVER_TYPE A4988 @@ -806,14 +812,16 @@ * Override with M92 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 500 } +//#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 160, 1600, 93 } +#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 800, 93 } /** * Default Max Feed Rate (mm/s) * Override with M203 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 } +//#define DEFAULT_MAX_FEEDRATE { 250, 150, 5, 25 } +#define DEFAULT_MAX_FEEDRATE { 250, 100, 5, 25 } //#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 #if ENABLED(LIMITED_MAX_FR_EDITING) @@ -826,7 +834,7 @@ * Override with M201 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 } +#define DEFAULT_MAX_ACCELERATION { 1500, 500, 400, 4000 } //#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 #if ENABLED(LIMITED_MAX_ACCEL_EDITING) @@ -841,9 +849,10 @@ * M204 R Retract Acceleration * M204 T Travel Acceleration */ -#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves + +#define DEFAULT_ACCELERATION 1500 // X, Y, Z and E acceleration for printing moves +#define DEFAULT_RETRACT_ACCELERATION 1500 // E acceleration for retracts +#define DEFAULT_TRAVEL_ACCELERATION 1500 // X, Y, Z acceleration for travel (non printing) moves /** * Default Jerk limits (mm/s) @@ -855,9 +864,9 @@ */ //#define CLASSIC_JERK #if ENABLED(CLASSIC_JERK) - #define DEFAULT_XJERK 10.0 - #define DEFAULT_YJERK 10.0 - #define DEFAULT_ZJERK 0.3 + #define DEFAULT_XJERK 12.0 // More conservative numbers. + #define DEFAULT_YJERK 8.0 + #define DEFAULT_ZJERK 0.4 //#define TRAVEL_EXTRA_XYJERK 0.0 // Additional jerk allowance for all travel moves @@ -877,7 +886,7 @@ * https://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html */ #if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.013 // (mm) Distance from real junction edge + #define JUNCTION_DEVIATION_MM 0.017 // (mm) Distance from real junction edge #define JD_HANDLE_SMALL_SEGMENTS // Use curvature estimation instead of just the junction angle // for small segments (< 1mm) with large junction angles (> 135°). #endif @@ -963,7 +972,7 @@ /** * The BLTouch probe uses a Hall effect sensor and emulates a servo. */ -//#define BLTOUCH +#define BLTOUCH /** * Touch-MI Probe by hotends.fr @@ -1055,14 +1064,14 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +#define NOZZLE_TO_PROBE_OFFSET { -3, 31, -1.25 } // Most probes should stay away from the edges of the bed, but // with NOZZLE_AS_PROBE this can be negative for a wider probing area. -#define PROBING_MARGIN 10 +#define PROBING_MARGIN 0 // X and Y axis travel speed (mm/min) between probes -#define XY_PROBE_FEEDRATE (133*60) +#define XY_PROBE_FEEDRATE (116*60) // Feedrate (mm/min) for the first approach when double-probing (MULTIPLE_PROBING == 2) #define Z_PROBE_FEEDRATE_FAST (4*60) @@ -1123,10 +1132,10 @@ * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. */ -#define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow -#define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points +#define Z_CLEARANCE_DEPLOY_PROBE 7 // Z Clearance for Deploy/Stow +#define Z_CLEARANCE_BETWEEN_PROBES 7 // Z Clearance between probe points #define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes -//#define Z_AFTER_PROBING 5 // Z position after probing is done +#define Z_AFTER_PROBING 7 // Z position after probing is done #define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping @@ -1135,7 +1144,7 @@ #define Z_PROBE_OFFSET_RANGE_MAX 20 // Enable the M48 repeatability test to test probe accuracy -//#define Z_MIN_PROBE_REPEATABILITY_TEST +#define Z_MIN_PROBE_REPEATABILITY_TEST // Before deploy/stow pause for user confirmation //#define PAUSE_BEFORE_DEPLOY_STOW @@ -1185,20 +1194,20 @@ // @section extruder #define DISABLE_E false // Disable the extruder when not stepping -#define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled +//#define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled // @section machine // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR false -#define INVERT_Y_DIR true -#define INVERT_Z_DIR false +#define INVERT_Y_DIR false +#define INVERT_Z_DIR true // @section extruder // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR false -#define INVERT_E1_DIR false +#define INVERT_E1_DIR true #define INVERT_E2_DIR false #define INVERT_E3_DIR false #define INVERT_E4_DIR false @@ -1218,7 +1227,7 @@ */ //#define Z_IDLE_HEIGHT Z_HOME_POS -//#define Z_HOMING_HEIGHT 4 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ... +#define Z_HOMING_HEIGHT 8 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ... // Be sure to have this much clearance over your Z_MAX_POS to prevent grinding. //#define Z_AFTER_HOMING 10 // (mm) Height to move to after homing Z @@ -1226,22 +1235,26 @@ // Direction of endstops when homing; 1=MAX, -1=MIN // :[-1,1] #define X_HOME_DIR -1 -#define Y_HOME_DIR -1 +#define Y_HOME_DIR 1 #define Z_HOME_DIR -1 // @section machine // The size of the printable area -#define X_BED_SIZE 200 -#define Y_BED_SIZE 200 +#define X_BED_SIZE 400 +#define Y_BED_SIZE 400 // Travel limits (mm) after homing, corresponding to endstop positions. -#define X_MIN_POS 0 +#define X_MIN_POS -42 #define Y_MIN_POS 0 #define Z_MIN_POS 0 -#define X_MAX_POS X_BED_SIZE +#define X_MAX_POS 450 #define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 200 +#if ENABLED(tallVersion) + #define Z_MAX_POS 700 +#else + #define Z_MAX_POS 500 +#endif /** * Software Endstops @@ -1269,7 +1282,7 @@ #endif #if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS) - //#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD + #define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD #endif /** @@ -1285,10 +1298,12 @@ * RAMPS-based boards use SERVO3_PIN for the first runout sensor. * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. */ -//#define FILAMENT_RUNOUT_SENSOR + +#define FILAMENT_RUNOUT_SENSOR + #if ENABLED(FILAMENT_RUNOUT_SENSOR) #define FIL_RUNOUT_ENABLED_DEFAULT true // Enable the sensor on startup. Override with M412 followed by M500. - #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. + #define NUM_RUNOUT_SENSORS 2 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. #define FIL_RUNOUT_STATE LOW // Pin state indicating that filament is NOT present. #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. @@ -1388,7 +1403,7 @@ //#define AUTO_BED_LEVELING_3POINT //#define AUTO_BED_LEVELING_LINEAR //#define AUTO_BED_LEVELING_BILINEAR -//#define AUTO_BED_LEVELING_UBL +#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING /** @@ -1396,7 +1411,7 @@ * these options to restore the prior leveling state or to always enable * leveling immediately after G28. */ -//#define RESTORE_LEVELING_AFTER_G28 +#define RESTORE_LEVELING_AFTER_G28 //#define ENABLE_LEVELING_AFTER_G28 /** @@ -1432,13 +1447,13 @@ // For Cartesian machines, instead of dividing moves on mesh boundaries, // split up moves into short segments like a Delta. This follows the // contours of the bed more closely than edge-to-edge straight moves. - #define SEGMENT_LEVELED_MOVES - #define LEVELED_SEGMENT_LENGTH 5.0 // (mm) Length of all segments (except the last one) +//#define SEGMENT_LEVELED_MOVES +//#define LEVELED_SEGMENT_LENGTH 5.0 // (mm) Length of all segments (except the last one) /** * Enable the G26 Mesh Validation Pattern tool. */ - //#define G26_MESH_VALIDATION + #define G26_MESH_VALIDATION #if ENABLED(G26_MESH_VALIDATION) #define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle. #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for G26. @@ -1484,10 +1499,10 @@ //========================= Unified Bed Leveling ============================ //=========================================================================== - //#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh + #define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh - #define MESH_INSET 1 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. + #define MESH_INSET 0 // Set Mesh bounds as an inset region of the bed + #define GRID_MAX_POINTS_X 11 // Don't use more than 15 points per axis, implementation limited. #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X //#define UBL_HILBERT_CURVE // Use Hilbert distribution for less travel when probing multiple points @@ -1495,7 +1510,7 @@ #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 - //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used + #define UBL_Z_RAISE_WHEN_OFF_MESH 0.0 // When the nozzle is off the mesh, this value is used // as the Z-Height correction value. //#define UBL_MESH_WIZARD // Run several commands in a row to get a complete mesh @@ -1565,7 +1580,7 @@ * Commands to execute at the end of G29 probing. * Useful to retract or move the Z probe out of the way. */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" +#define Z_PROBE_END_SCRIPT "M280 P0 S90" // @section homing @@ -1587,7 +1602,7 @@ // - Move the Z probe (or nozzle) to a defined XY point before Z Homing. // - Prevent Z homing when the Z probe is outside bed area. // -//#define Z_SAFE_HOMING +#define Z_SAFE_HOMING #if ENABLED(Z_SAFE_HOMING) #define Z_SAFE_HOMING_X_POINT X_CENTER // X point for Z homing @@ -1672,7 +1687,7 @@ * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) */ -//#define EEPROM_SETTINGS // Persistent storage with M500 and M501 +#define EEPROM_SETTINGS // Persistent storage with M500 and M501 //#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. #define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load @@ -1686,8 +1701,8 @@ // When enabled Marlin will send a busy status message to the host // every couple of seconds when it can't accept commands. // -#define HOST_KEEPALIVE_FEATURE // Disable this if your host doesn't like keepalive messages -#define DEFAULT_KEEPALIVE_INTERVAL 2 // Number of seconds between "busy" messages. Set with M113. +//#define HOST_KEEPALIVE_FEATURE // Disable this if your host doesn't like keepalive messages +#define DEFAULT_KEEPALIVE_INTERVAL 5 // Number of seconds between "busy" messages. Set with M113. #define BUSY_WHILE_HEATING // Some hosts require "busy" messages even during heating // @@ -1728,11 +1743,11 @@ * P1 Raise the nozzle always to Z-park height. * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. */ -//#define NOZZLE_PARK_FEATURE +#define NOZZLE_PARK_FEATURE #if ENABLED(NOZZLE_PARK_FEATURE) // Specify a park position as { X, Y, Z_raise } - #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 } + #define NOZZLE_PARK_POINT { 100, (Y_MIN_POS + 10), 20 } //#define NOZZLE_PARK_X_ONLY // X move only is required to park //#define NOZZLE_PARK_Y_ONLY // Y move only is required to park #define NOZZLE_PARK_Z_RAISE_MIN 2 // (mm) Always raise Z by at least this distance @@ -1845,7 +1860,7 @@ * * View the current statistics with M78. */ -//#define PRINTCOUNTER +#define PRINTCOUNTER #if ENABLED(PRINTCOUNTER) #define PRINTCOUNTER_SAVE_INTERVAL 60 // (minutes) EEPROM save interval during print #endif @@ -1936,7 +1951,10 @@ * SD Card support is disabled by default. If your controller has an SD slot, * you must uncomment the following option or it won't work. */ -//#define SDSUPPORT + +#if DISABLED(ICSP_PORT_SWITCHES) // If ICSP_PORT is in use, those pins now are filament runout sensors + #define SDSUPPORT // instead of being used by the SD Memory card socket +#endif /** * SD CARD: ENABLE CRC @@ -2006,7 +2024,7 @@ // // Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. // -//#define INDIVIDUAL_AXIS_HOMING_MENU +#define INDIVIDUAL_AXIS_HOMING_MENU // // SPEAKER/BUZZER @@ -2195,7 +2213,7 @@ // RepRapDiscount FULL GRAPHIC Smart Controller // https://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller // -//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER +#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER // // K.3D Full Graphic Smart Controller @@ -2743,3 +2761,9 @@ // Edit servo angles with M281 and save to EEPROM with M500 //#define EDITABLE_SERVO_ANGLES + +#ifdef ROXYs_TRex + #define LED_PIN -1 + #define BEEPER_PIN -1 + #define KILL_PIN -1 +#endif diff --git a/config/examples/Formbot/T_Rex_3/Configuration_adv.h b/config/examples/Formbot/T_Rex_3/Configuration_adv.h index 5335fa012a..779720a423 100644 --- a/config/examples/Formbot/T_Rex_3/Configuration_adv.h +++ b/config/examples/Formbot/T_Rex_3/Configuration_adv.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Formbot/T_Rex_3" + /** * Configuration_adv.h * @@ -238,8 +240,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 60 // Seconds + #define THERMAL_PROTECTION_HYSTERESIS 10 // Degrees Celsius //#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops #if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP) @@ -258,7 +260,7 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 20 // Seconds + #define WATCH_TEMP_PERIOD 60 // Seconds #define WATCH_TEMP_INCREASE 2 // Degrees Celsius #endif @@ -266,8 +268,8 @@ * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 60 // Seconds + #define THERMAL_PROTECTION_BED_HYSTERESIS 5 // Degrees Celsius /** * As described above, except for the bed (M140/M190/M303). @@ -307,7 +309,7 @@ #if ENABLED(PIDTEMP) // Add an experimental additional term to the heater power, proportional to the extrusion speed. // A well-chosen Kc value should add just enough power to melt the increased material volume. - //#define PID_EXTRUSION_SCALING + #define PID_EXTRUSION_SCALING #if ENABLED(PID_EXTRUSION_SCALING) #define DEFAULT_Kc (100) // heating power = Kc * e_speed #define LPQ_MAX_LEN 50 @@ -479,7 +481,7 @@ // When first starting the main fan, run it at full speed for the // given number of milliseconds. This gets the fan spinning reliably // before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) -//#define FAN_KICKSTART_TIME 100 +#define FAN_KICKSTART_TIME 100 // Some coolers may require a non-zero "off" state. //#define FAN_OFF_PWM 1 @@ -496,7 +498,7 @@ * * Define one or both of these to override the default 0-255 range. */ -//#define FAN_MIN_PWM 50 +#define FAN_MIN_PWM 64 //#define FAN_MAX_PWM 128 /** @@ -573,15 +575,19 @@ /** * M355 Case Light on-off / brightness */ -//#define CASE_LIGHT_ENABLE +#define CASE_LIGHT_ENABLE #if ENABLED(CASE_LIGHT_ENABLE) - //#define CASE_LIGHT_PIN 4 // Override the default pin if needed +//#define CASE_LIGHT_PIN 8 // Now set in appropriate pins file #define INVERT_CASE_LIGHT false // Set true if Case Light is ON when pin is LOW #define CASE_LIGHT_DEFAULT_ON true // Set default power-up state on - #define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // Set default power-up brightness (0-255, requires PWM pin) + #ifdef ROXYs_TRex + #define CASE_LIGHT_DEFAULT_BRIGHTNESS 25 // Set default power-up brightness (0-255, requires PWM pin) + #else + #define CASE_LIGHT_DEFAULT_BRIGHTNESS 255 // Set default power-up brightness (0-255, requires PWM pin) + #endif //#define CASE_LIGHT_NO_BRIGHTNESS // Disable brightness control. Enable for non-PWM lighting. //#define CASE_LIGHT_MAX_PWM 128 // Limit PWM duty cycle (0-255) - //#define CASE_LIGHT_MENU // Add Case Light options to the LCD menu + #define CASE_LIGHT_MENU // Add Case Light options to the LCD menu #if ENABLED(NEOPIXEL_LED) //#define CASE_LIGHT_USE_NEOPIXEL // Use NeoPixel LED as case light #endif @@ -699,14 +705,14 @@ * Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and * follow with M605 S3 to initiate mirrored movement. */ -//#define DUAL_X_CARRIAGE +#define DUAL_X_CARRIAGE #if ENABLED(DUAL_X_CARRIAGE) - #define X1_MIN_POS X_MIN_POS // Set to X_MIN_POS - #define X1_MAX_POS X_BED_SIZE // Set a maximum so the first X-carriage can't hit the parked second X-carriage - #define X2_MIN_POS 80 // Set a minimum to ensure the second X-carriage can't hit the parked first X-carriage - #define X2_MAX_POS 353 // Set this to the distance between toolheads when both heads are homed - #define X2_HOME_DIR 1 // Set to 1. The second X-carriage always homes to the maximum endstop position - #define X2_HOME_POS X2_MAX_POS // Default X2 home position. Set to X2_MAX_POS. + #define X1_MIN_POS X_MIN_POS // Set to X_MIN_POS + #define X1_MAX_POS X_BED_SIZE // Set a maximum so the first X-carriage can't hit the parked second X-carriage + #define X2_MIN_POS 0 // Set a minimum to ensure the second X-carriage can't hit the parked first X-carriage + #define X2_MAX_POS (442-4.0) // Set this to the distance between toolheads when both heads are homed + #define X2_HOME_DIR 1 // the second X-carriage always homes to the maximum endstop position + #define X2_HOME_POS X2_MAX_POS // Default X2 home position. Set to X2_MAX_POS. // However: In this mode the HOTEND_OFFSET_X value for the second extruder provides a software // override for X2_HOME_POS. This also allow recalibration of the distance between the two endstops // without modifying the firmware (through the "M218 T1 X???" command). @@ -716,7 +722,7 @@ #define DEFAULT_DUAL_X_CARRIAGE_MODE DXC_AUTO_PARK_MODE // Default x offset in duplication mode (typically set to half print bed width) - #define DEFAULT_DUPLICATION_X_OFFSET 100 + #define DEFAULT_DUPLICATION_X_OFFSET 200 // Default action to execute following M605 mode change commands. Typically G28X to apply new mode. //#define EVENT_GCODE_IDEX_AFTER_MODECHANGE "G28X" @@ -741,7 +747,7 @@ //#define HOMING_BACKOFF_POST_MM { 2, 2, 2 } // (mm) Backoff from endstops after homing -//#define QUICK_HOME // If G28 contains XY do a diagonal move first +#define QUICK_HOME // If G28 contains XY do a diagonal move first //#define HOME_Y_BEFORE_X // If G28 contains XY home Y before X //#define HOME_Z_FIRST // Home Z first. Requires a Z-MIN endstop (not a probe). //#define CODEPENDENT_XY_HOMING // If X/Y can't home without homing Y/X first @@ -867,7 +873,7 @@ // On a 300mm bed a 5% grade would give a misalignment of ~1.5cm #define G34_MAX_GRADE 5 // (%) Maximum incline that G34 will handle - #define Z_STEPPER_ALIGN_ITERATIONS 5 // Number of iterations to apply during alignment + #define Z_STEPPER_ALIGN_ITERATIONS 3 // Number of iterations to apply during alignment #define Z_STEPPER_ALIGN_ACC 0.02 // Stop iterating early if the accuracy is better than this #define RESTORE_LEVELING_AFTER_G34 // Restore leveling after G34 is done? // After G34, re-home Z (G28 Z) or just calculate it from the last probe heights? @@ -925,7 +931,7 @@ * Set DISABLE_INACTIVE_? 'true' to shut down axis steppers after an idle period. * The Deactive Time can be overridden with M18 and M84. Set to 0 for No Timeout. */ -#define DEFAULT_STEPPER_DEACTIVE_TIME 120 +#define DEFAULT_STEPPER_DEACTIVE_TIME 600 #define DISABLE_INACTIVE_X true #define DISABLE_INACTIVE_Y true #define DISABLE_INACTIVE_Z true // Set 'false' if the nozzle could fall onto your printed part! @@ -1175,7 +1181,7 @@ #endif // Include a page of printer information in the LCD Main Menu - //#define LCD_INFO_MENU + #define LCD_INFO_MENU #if ENABLED(LCD_INFO_MENU) //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages #endif @@ -1219,7 +1225,7 @@ #if HAS_DISPLAY // The timeout (in ms) to return to the status screen from sub-menus - //#define LCD_TIMEOUT_TO_STATUS 15000 + #define LCD_TIMEOUT_TO_STATUS 15000 #if ENABLED(SHOW_BOOTSCREEN) #define BOOTSCREEN_TIMEOUT 4000 // (ms) Total Duration to display the boot screen(s) @@ -1229,13 +1235,13 @@ #endif // Scroll a longer status message into view - //#define STATUS_MESSAGE_SCROLLING + #define STATUS_MESSAGE_SCROLLING // On the Info Screen, display XY with one decimal place when possible - //#define LCD_DECIMAL_SMALL_XY + #define LCD_DECIMAL_SMALL_XY // Add an 'M73' G-code to set the current percentage - //#define LCD_SET_PROGRESS_MANUALLY + #define LCD_SET_PROGRESS_MANUALLY // Show the E position (filament used) during printing //#define LCD_SHOW_E_TOTAL @@ -1301,7 +1307,7 @@ //#define BROWSE_MEDIA_ON_INSERT // Open the file browser when media is inserted - #define EVENT_GCODE_SD_ABORT "G28XY" // G-code to run on SD Abort Print (e.g., "G28XY" or "G27") + #define EVENT_GCODE_SD_ABORT "G27" // G-code to run on SD Abort Print (e.g., "G28XY" or "G27") #if ENABLED(PRINTER_EVENT_LEDS) #define PE_LEDS_COMPLETED_TIME (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination @@ -1365,9 +1371,9 @@ // SD Card Sorting options #if ENABLED(SDCARD_SORT_ALPHA) - #define SDSORT_LIMIT 40 // Maximum number of sorted items (10-256). Costs 27 bytes each. + #define SDSORT_LIMIT 20 // Maximum number of sorted items (10-256). Costs 27 bytes each. #define FOLDER_SORTING -1 // -1=above 0=none 1=below - #define SDSORT_GCODE false // Allow turning sorting on/off with LCD and M34 G-code. + #define SDSORT_GCODE true // Allow turning sorting on/off with LCD and M34 G-code. #define SDSORT_USES_RAM false // Pre-allocate a static array for faster pre-sorting. #define SDSORT_USES_STACK false // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.) #define SDSORT_CACHE_NAMES false // Keep sorted items in RAM longer for speedy performance. Most expensive option. @@ -1381,10 +1387,10 @@ //#define UTF_FILENAME_SUPPORT // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT + #define LONG_FILENAME_HOST_SUPPORT // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES + #define SCROLL_LONG_FILENAMES // Leave the heaters on after Stop Print (not recommended!) //#define SD_ABORT_NO_COOLDOWN @@ -1406,7 +1412,7 @@ /** * Auto-report SdCard status with M27 S */ - //#define AUTO_REPORT_SD_STATUS + #define AUTO_REPORT_SD_STATUS /** * Support for USB thumb drives using an Arduino USB Host Shield or @@ -1523,7 +1529,7 @@ // A bigger font is available for edit items. Costs 3120 bytes of PROGMEM. // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. - //#define USE_BIG_EDIT_FONT + #define USE_BIG_EDIT_FONT // A smaller font may be used on the Info Screen. Costs 2434 bytes of PROGMEM. // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. @@ -1790,7 +1796,7 @@ * * Warning: Does not respect endstops! */ -//#define BABYSTEPPING +#define BABYSTEPPING #if ENABLED(BABYSTEPPING) //#define INTEGRATED_BABYSTEPPING // EXPERIMENTAL integration of babystepping into the Stepper ISR //#define BABYSTEP_WITHOUT_HOMING @@ -1798,10 +1804,10 @@ //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way //#define BABYSTEP_MILLIMETER_UNITS // Specify BABYSTEP_MULTIPLICATOR_(XY|Z) in mm instead of micro-steps - #define BABYSTEP_MULTIPLICATOR_Z 1 // (steps or mm) Steps or millimeter distance for each Z babystep - #define BABYSTEP_MULTIPLICATOR_XY 1 // (steps or mm) Steps or millimeter distance for each XY babystep + #define BABYSTEP_MULTIPLICATOR_Z 40 // (steps or mm) Steps or millimeter distance for each Z babystep + #define BABYSTEP_MULTIPLICATOR_XY 40 // (steps or mm) Steps or millimeter distance for each Z babystep - //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. + #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. // Note: Extra time may be added to mitigate controller latency. @@ -1852,12 +1858,12 @@ * Override if the automatically selected points are inadequate. */ #if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL) - //#define PROBE_PT_1_X 15 - //#define PROBE_PT_1_Y 180 - //#define PROBE_PT_2_X 15 - //#define PROBE_PT_2_Y 20 - //#define PROBE_PT_3_X 170 - //#define PROBE_PT_3_Y 20 + #define PROBE_PT_1_X 35 + #define PROBE_PT_1_Y 365 + #define PROBE_PT_2_X 35 + #define PROBE_PT_2_Y 35 + #define PROBE_PT_3_X 365 + #define PROBE_PT_3_Y 35 #endif /** @@ -1888,7 +1894,7 @@ #if EITHER(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL) // Override the mesh area if the automatic (max) area is too large - //#define MESH_MIN_X MESH_INSET + //#define MESH_MIN_X 4 //#define MESH_MIN_Y MESH_INSET //#define MESH_MAX_X X_BED_SIZE - (MESH_INSET) //#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET) @@ -2188,7 +2194,7 @@ * 'M106 P T2' : Use the set secondary speed * 'M106 P T1' : Restore the previous fan speed */ -//#define EXTRA_FAN_SPEED +#define EXTRA_FAN_SPEED /** * Firmware-based and LCD-controlled retract @@ -2311,28 +2317,28 @@ * * Enable PARK_HEAD_ON_PAUSE to add the G-code M125 Pause and Park. */ -//#define ADVANCED_PAUSE_FEATURE +#define ADVANCED_PAUSE_FEATURE #if ENABLED(ADVANCED_PAUSE_FEATURE) - #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. - #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. + #define PAUSE_PARK_RETRACT_FEEDRATE 7 // (mm/s) Initial retract feedrate. + #define PAUSE_PARK_RETRACT_LENGTH 1 // (mm) Initial retract. // This short retract is done immediately, before parking the nozzle. - #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast. - #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload. + #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 15 // (mm/s) Unload filament feedrate. This can be pretty fast. + #define FILAMENT_CHANGE_UNLOAD_ACCEL 15 // (mm/s^2) Lower acceleration may allow a faster feedrate. + #define FILAMENT_CHANGE_UNLOAD_LENGTH 85 // (mm) The length of filament for a complete unload. // For Bowden, the full length of the tube and nozzle. // For direct drive, the full length of the nozzle. // Set to 0 for manual unloading. - #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE 6 // (mm/s) Slow move when starting load. - #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 0 // (mm) Slow length, to allow time to insert material. + #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE 3 // (mm/s) Slow move when starting load. + #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 1 // (mm) Slow length, to allow time to insert material. // 0 to disable start loading and skip to fast load only - #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast. - #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle. + #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 4 // (mm/s) Load filament feedrate. This can be pretty fast. + #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 15 // (mm/s^2) Lower acceleration may allow a faster feedrate. + #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 60 // (mm) Load length of filament, from extruder gear to nozzle. // For Bowden, the full length of the tube and nozzle. // For direct drive, the full length of the nozzle. //#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted. - #define ADVANCED_PAUSE_PURGE_FEEDRATE 3 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate. - #define ADVANCED_PAUSE_PURGE_LENGTH 50 // (mm) Length to extrude after loading. + #define ADVANCED_PAUSE_PURGE_FEEDRATE 2 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate. + #define ADVANCED_PAUSE_PURGE_LENGTH 20 // (mm) Length to extrude after loading. // Set to 0 for manual extrusion. // Filament can be extruded repeatedly from the Filament Change menu // until extrusion is consistent, and to purge old filament. @@ -2340,20 +2346,20 @@ //#define ADVANCED_PAUSE_FANS_PAUSE // Turn off print-cooling fans while the machine is paused. // Filament Unload does a Retract, Delay, and Purge first: - #define FILAMENT_UNLOAD_PURGE_RETRACT 13 // (mm) Unload initial retract length. - #define FILAMENT_UNLOAD_PURGE_DELAY 5000 // (ms) Delay for the filament to cool after retract. - #define FILAMENT_UNLOAD_PURGE_LENGTH 8 // (mm) An unretract is done, then this length is purged. + #define FILAMENT_UNLOAD_PURGE_RETRACT 0 // (mm) Unload initial retract length. + #define FILAMENT_UNLOAD_PURGE_DELAY 500 // (ms) Delay for the filament to cool after retract. + #define FILAMENT_UNLOAD_PURGE_LENGTH 0 // (mm) An unretract is done, then this length is purged. #define FILAMENT_UNLOAD_PURGE_FEEDRATE 25 // (mm/s) feedrate to purge before unload - #define PAUSE_PARK_NOZZLE_TIMEOUT 45 // (seconds) Time limit before the nozzle is turned off for safety. - #define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed. + #define PAUSE_PARK_NOZZLE_TIMEOUT (3*60) // (seconds) Time limit before the nozzle is turned off for safety. + #define FILAMENT_CHANGE_ALERT_BEEPS 3 // Number of alert beeps to play when a response is needed. #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change. - //#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. - //#define HOME_BEFORE_FILAMENT_CHANGE // If needed, home before parking for filament change + #define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. + #define HOME_BEFORE_FILAMENT_CHANGE // If needed, home before parking for filament change - //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. - //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) + #define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. + #define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) #endif // @section tmc @@ -3474,7 +3480,7 @@ //#define NO_WORKSPACE_OFFSETS // Extra options for the M114 "Current Position" report -//#define M114_DETAIL // Use 'M114` for details to check planner calculations +#define M114_DETAIL // Use 'M114` for details to check planner calculations //#define M114_REALTIME // Real current position based on forward kinematics //#define M114_LEGACY // M114 used to synchronize on every call. Enable if needed. @@ -3487,7 +3493,7 @@ * For clients that use a fixed-width font (like OctoPrint), leave this set to 1.0. * Otherwise, adjust according to your client and font. */ -#define PROPORTIONAL_FONT_RATIO 1.0 +#define PROPORTIONAL_FONT_RATIO 1.5 /** * Spend 28 bytes of SRAM to optimize the G-code parser @@ -3548,31 +3554,25 @@ // Custom Menu: Main Menu //#define CUSTOM_MENU_MAIN #if ENABLED(CUSTOM_MENU_MAIN) - //#define CUSTOM_MENU_MAIN_TITLE "Custom Commands" - #define CUSTOM_MENU_MAIN_SCRIPT_DONE "M117 User Script Done" - #define CUSTOM_MENU_MAIN_SCRIPT_AUDIBLE_FEEDBACK - //#define CUSTOM_MENU_MAIN_SCRIPT_RETURN // Return to status screen after a script + //#define CUSTOM_MENU_MAIN_SCRIPT_AUDIBLE_FEEDBACK + #define CUSTOM_MENU_MAIN_SCRIPT_RETURN // Return to status screen after a script #define CUSTOM_MENU_MAIN_ONLY_IDLE // Only show custom menu when the machine is idle - #define MAIN_MENU_ITEM_1_DESC "Home & UBL Info" - #define MAIN_MENU_ITEM_1_GCODE "G28\nG29 W" + #define MAIN_MENU_ITEM_1_DESC "User cmd 1" + #define MAIN_MENU_ITEM_1_GCODE "G28 X \n" //#define MAIN_MENU_ITEM_1_CONFIRM // Show a confirmation dialog before this action - #define MAIN_MENU_ITEM_2_DESC "Preheat for " PREHEAT_1_LABEL - #define MAIN_MENU_ITEM_2_GCODE "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND) + #define MAIN_MENU_ITEM_2_DESC "User cmd 2" + #define MAIN_MENU_ITEM_2_GCODE "G28 \nG1 X100 \n" //#define MAIN_MENU_ITEM_2_CONFIRM - //#define MAIN_MENU_ITEM_3_DESC "Preheat for " PREHEAT_2_LABEL - //#define MAIN_MENU_ITEM_3_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) + #define MAIN_MENU_ITEM_3_DESC "User cmd 3" + #define MAIN_MENU_ITEM_3_GCODE "M48 \n" //#define MAIN_MENU_ITEM_3_CONFIRM - //#define MAIN_MENU_ITEM_4_DESC "Heat Bed/Home/Level" - //#define MAIN_MENU_ITEM_4_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29" + #define MAIN_MENU_ITEM_4_DESC "User cmd 4" + #define MAIN_MENU_ITEM_4_GCODE "M114 \n" //#define MAIN_MENU_ITEM_4_CONFIRM - - //#define MAIN_MENU_ITEM_5_DESC "Home & Info" - //#define MAIN_MENU_ITEM_5_GCODE "G28\nM503" - //#define MAIN_MENU_ITEM_5_CONFIRM #endif // Custom Menu: Configuration Menu @@ -3802,15 +3802,25 @@ * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display. * Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. */ -//#define MAX7219_DEBUG -#if ENABLED(MAX7219_DEBUG) - #define MAX7219_CLK_PIN 64 - #define MAX7219_DIN_PIN 57 - #define MAX7219_LOAD_PIN 44 - //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix +#ifdef ROXYs_TRex + #define MAX7219_DEBUG +#endif + +#if ENABLED(MAX7219_DEBUG) + /* + #define MAX7219_CLK_PIN 50 // Configuration of the 3 pins to control the display + #define MAX7219_DIN_PIN 51 // on RUMBA (or Formbot) using the ICSP port is used + #define MAX7219_LOAD_PIN 52 // This will affect your use of the SD Memory card + */ + + #define MAX7219_CLK_PIN 41 // Configuration of the 3 pins to control the display + #define MAX7219_DIN_PIN 13 // 41 is LCD_Kill_Button, 13 is Arduino_LED, 37 is LCD_Beeper + #define MAX7219_LOAD_PIN 37 + + #define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix #define MAX7219_INIT_TEST 2 // Test pattern at startup: 0=none, 1=sweep, 2=spiral - #define MAX7219_NUMBER_UNITS 1 // Number of Max7219 units in chain. + #define MAX7219_NUMBER_UNITS 2 // Number of Max7219 units in chain. #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) // connector at: right=0 bottom=-90 top=90 left=180 //#define MAX7219_REVERSE_ORDER // The individual LED matrix units may be in reversed order @@ -3821,10 +3831,10 @@ * If you add more debug displays, be careful to avoid conflicts! */ #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning - #define MAX7219_DEBUG_PLANNER_HEAD 3 // Show the planner queue head position on this and the next LED matrix row - #define MAX7219_DEBUG_PLANNER_TAIL 5 // Show the planner queue tail position on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_HEAD 5 // Show the planner queue head position on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_TAIL 6 // Show the planner queue tail position on this and the next LED matrix row - #define MAX7219_DEBUG_PLANNER_QUEUE 0 // Show the current planner queue depth on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_QUEUE 7 // Show the current planner queue depth on this and the next LED matrix row // If you experience stuttering, reboots, etc. this option can reveal how // tweaks made to the configuration are affecting the printer in real-time. #endif @@ -4002,7 +4012,7 @@ // // M43 - display pin status, toggle pins, watch pins, watch endstops & toggle LED, test servo probe // -//#define PINS_DEBUGGING +#define PINS_DEBUGGING // Enable Marlin dev mode which adds some special commands //#define MARLIN_DEV_MODE diff --git a/config/examples/Geeetech/A10/Configuration.h b/config/examples/Geeetech/A10/Configuration.h index 78c2dc9160..ca16062a88 100644 --- a/config/examples/Geeetech/A10/Configuration.h +++ b/config/examples/Geeetech/A10/Configuration.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Geeetech/A10" + /** * Configuration.h * @@ -69,7 +71,7 @@ // @section info // Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes. +#define STRING_CONFIG_H_AUTHOR "(Phr3d13, Geeetech A10 default)" // Who made the changes. //#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) /** @@ -134,11 +136,11 @@ // Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_RAMPS_14_EFB + #define MOTHERBOARD BOARD_GT2560_V3 #endif // Name displayed in the LCD "Ready" message and Info menu -//#define CUSTOM_MACHINE_NAME "3D Printer" +#define CUSTOM_MACHINE_NAME "Geeetech A10" // Printer's unique ID, used by some programs to differentiate between machines. // Choose your own or use a service like https://www.uuidgenerator.net/version4 @@ -297,9 +299,9 @@ #define MIXING_STEPPERS 2 // Number of steppers in your mixing extruder #define MIXING_VIRTUAL_TOOLS 16 // Use the Virtual Tool method with M163 and M164 //#define DIRECT_MIXING_IN_G1 // Allow ABCDHI mix factors in G1 movement commands - //#define GRADIENT_MIX // Support for gradient mixing with M166 and LCD + #define GRADIENT_MIX // Support for gradient mixing with M166 and LCD #if ENABLED(GRADIENT_MIX) - //#define GRADIENT_VTOOL // Add M166 T to use a V-tool index as a Gradient alias + #define GRADIENT_VTOOL // Add M166 T to use a V-tool index as a Gradient alias #endif #endif @@ -424,7 +426,7 @@ #define TEMP_SENSOR_5 0 #define TEMP_SENSOR_6 0 #define TEMP_SENSOR_7 0 -#define TEMP_SENSOR_BED 0 +#define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 #define TEMP_SENSOR_COOLER 0 @@ -505,21 +507,22 @@ #define PID_K1 0.95 // Smoothing factor within any PID loop #if ENABLED(PIDTEMP) - //#define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) - //#define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) + #define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) + #define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) // Set/get with gcode: M301 E[extruder number, 0-2] + // A10M [@thinkyhead] #if ENABLED(PID_PARAMS_PER_HOTEND) // Specify between 1 and HOTENDS values per array. // If fewer than EXTRUDER values are provided, the last element will be repeated. - #define DEFAULT_Kp_LIST { 22.20, 22.20 } - #define DEFAULT_Ki_LIST { 1.08, 1.08 } - #define DEFAULT_Kd_LIST { 114.00, 114.00 } + #define DEFAULT_Kp_LIST { 45.80, 45.80 } + #define DEFAULT_Ki_LIST { 3.61, 3.61 } + #define DEFAULT_Kd_LIST { 145.39, 145.39 } #else - #define DEFAULT_Kp 22.20 - #define DEFAULT_Ki 1.08 - #define DEFAULT_Kd 114.00 + #define DEFAULT_Kp 45.80 + #define DEFAULT_Ki 3.61 + #define DEFAULT_Kd 145.39 #endif #endif // PIDTEMP @@ -540,7 +543,7 @@ * heater. If your configuration is significantly different than this and you don't understand * the issues involved, don't use bed PID until someone else verifies that your hardware works. */ -//#define PIDTEMPBED +#define PIDTEMPBED //#define BED_LIMIT_SWITCHING @@ -556,11 +559,10 @@ //#define MIN_BED_POWER 0 //#define PID_BED_DEBUG // Sends debug data to the serial port. - // 120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - // from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) - #define DEFAULT_bedKp 10.00 - #define DEFAULT_bedKi .023 - #define DEFAULT_bedKd 305.4 + // MeCreator2 generated by Autotune + #define DEFAULT_bedKp 182.46 // 175.68 189.95 + #define DEFAULT_bedKi 35.92 // 34.59 37.40 + #define DEFAULT_bedKd 231.70 // 223.07 241.19 // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. #endif // PIDTEMPBED @@ -634,7 +636,7 @@ * Note: For Bowden Extruders make this large enough to allow load/unload. */ #define PREVENT_LENGTHY_EXTRUDE -#define EXTRUDE_MAXLENGTH 200 +#define EXTRUDE_MAXLENGTH 450 //=========================================================================== //======================== Thermal Runaway Protection ======================= @@ -717,13 +719,13 @@ #endif // Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define X_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_PROBE_ENDSTOP_INVERTING false // Set to true to invert the logic of the probe. +#define X_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Y_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Z_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define X_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Y_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Z_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Z_MIN_PROBE_ENDSTOP_INVERTING true // Set to true to invert the logic of the probe. /** * Stepper Drivers @@ -806,14 +808,14 @@ * Override with M92 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 500 } +#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 93 } /** * Default Max Feed Rate (mm/s) * Override with M203 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 } +#define DEFAULT_MAX_FEEDRATE { 500, 500, 5, 25 } //#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 #if ENABLED(LIMITED_MAX_FR_EDITING) @@ -826,7 +828,7 @@ * Override with M201 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 } +#define DEFAULT_MAX_ACCELERATION { 500, 500, 100, 5000 } //#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 #if ENABLED(LIMITED_MAX_ACCEL_EDITING) @@ -841,9 +843,9 @@ * M204 R Retract Acceleration * M204 T Travel Acceleration */ -#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves +#define DEFAULT_ACCELERATION 1000 // X, Y, Z and E acceleration for printing moves +#define DEFAULT_RETRACT_ACCELERATION 2000 // E acceleration for retracts +#define DEFAULT_TRAVEL_ACCELERATION 1000 // X, Y, Z acceleration for travel (non printing) moves /** * Default Jerk limits (mm/s) @@ -857,7 +859,7 @@ #if ENABLED(CLASSIC_JERK) #define DEFAULT_XJERK 10.0 #define DEFAULT_YJERK 10.0 - #define DEFAULT_ZJERK 0.3 + #define DEFAULT_ZJERK 0.4 //#define TRAVEL_EXTRA_XYJERK 0.0 // Additional jerk allowance for all travel moves @@ -877,7 +879,7 @@ * https://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html */ #if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.013 // (mm) Distance from real junction edge + #define JUNCTION_DEVIATION_MM 0.04 // (mm) Distance from real junction edge #define JD_HANDLE_SMALL_SEGMENTS // Use curvature estimation instead of just the junction angle // for small segments (< 1mm) with large junction angles (> 135°). #endif @@ -940,7 +942,7 @@ * Use G29 repeatedly, adjusting the Z height at each point with movement commands * or (with LCD_BED_LEVELING) the LCD controller. */ -//#define PROBE_MANUALLY +#define PROBE_MANUALLY /** * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. @@ -1055,7 +1057,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +#define NOZZLE_TO_PROBE_OFFSET { -37, 0, -3.6 } // Most probes should stay away from the edges of the bed, but // with NOZZLE_AS_PROBE this can be negative for a wider probing area. @@ -1065,7 +1067,7 @@ #define XY_PROBE_FEEDRATE (133*60) // Feedrate (mm/min) for the first approach when double-probing (MULTIPLE_PROBING == 2) -#define Z_PROBE_FEEDRATE_FAST (4*60) +#define Z_PROBE_FEEDRATE_FAST (20*60) // Feedrate (mm/min) for the "accurate" probe of each point #define Z_PROBE_FEEDRATE_SLOW (Z_PROBE_FEEDRATE_FAST / 2) @@ -1106,7 +1108,7 @@ * A total of 2 does fast/slow probes with a weighted average. * A total of 3 or more adds more slow probes, taking the average. */ -//#define MULTIPLE_PROBING 2 +#define MULTIPLE_PROBING 2 //#define EXTRA_PROBING 1 /** @@ -1123,16 +1125,16 @@ * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. */ -#define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow -#define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points -#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes -//#define Z_AFTER_PROBING 5 // Z position after probing is done +#define Z_CLEARANCE_DEPLOY_PROBE 5 // Z Clearance for Deploy/Stow +#define Z_CLEARANCE_BETWEEN_PROBES 3 // Z Clearance between probe points +#define Z_CLEARANCE_MULTI_PROBE 2 // Z Clearance between multiple probes +#define Z_AFTER_PROBING 3 // Z position after probing is done #define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping // For M851 give a range for adjusting the Z probe offset -#define Z_PROBE_OFFSET_RANGE_MIN -20 -#define Z_PROBE_OFFSET_RANGE_MAX 20 +#define Z_PROBE_OFFSET_RANGE_MIN -5 +#define Z_PROBE_OFFSET_RANGE_MAX 0 // Enable the M48 repeatability test to test probe accuracy //#define Z_MIN_PROBE_REPEATABILITY_TEST @@ -1150,14 +1152,14 @@ * These options are most useful for the BLTouch probe, but may also improve * readings with inductive probes and piezo sensors. */ -//#define PROBING_HEATERS_OFF // Turn heaters off when probing +#define PROBING_HEATERS_OFF // Turn heaters off when probing #if ENABLED(PROBING_HEATERS_OFF) - //#define WAIT_FOR_BED_HEATER // Wait for bed to heat back up between probes (to improve accuracy) + #define WAIT_FOR_BED_HEATER // Wait for bed to heat back up between probes (to improve accuracy) //#define WAIT_FOR_HOTEND // Wait for hotend to heat back up between probes (to improve accuracy & prevent cold extrude) #endif -//#define PROBING_FANS_OFF // Turn fans off when probing +#define PROBING_FANS_OFF // Turn fans off when probing //#define PROBING_STEPPERS_OFF // Turn steppers off (unless needed to hold position) when probing -//#define DELAY_BEFORE_PROBING 200 // (ms) To prevent vibrations from triggering piezo sensors +#define DELAY_BEFORE_PROBING 100 // (ms) To prevent vibrations from triggering piezo sensors // Require minimum nozzle and/or bed temperature for probing //#define PREHEAT_BEFORE_PROBING @@ -1190,21 +1192,19 @@ // @section machine // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR false +#define INVERT_X_DIR true #define INVERT_Y_DIR true #define INVERT_Z_DIR false // @section extruder // For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR false -#define INVERT_E1_DIR false -#define INVERT_E2_DIR false -#define INVERT_E3_DIR false -#define INVERT_E4_DIR false -#define INVERT_E5_DIR false -#define INVERT_E6_DIR false -#define INVERT_E7_DIR false +#define INVERT_E0_DIR true +#define INVERT_E1_DIR false // unused, the A10 only has one extruder by default +#define INVERT_E2_DIR false // unused, the A10 only has one extruder by default +#define INVERT_E3_DIR false // unused, the A10 only has one extruder by default +#define INVERT_E4_DIR false // unused, the A10 only has one extruder by default +#define INVERT_E5_DIR false // unused, the A10 only has one extruder by default // @section homing @@ -1232,16 +1232,16 @@ // @section machine // The size of the printable area -#define X_BED_SIZE 200 -#define Y_BED_SIZE 200 +#define X_BED_SIZE 230 +#define Y_BED_SIZE 230 // Travel limits (mm) after homing, corresponding to endstop positions. -#define X_MIN_POS 0 -#define Y_MIN_POS 0 +#define X_MIN_POS -11 +#define Y_MIN_POS -4 #define Z_MIN_POS 0 #define X_MAX_POS X_BED_SIZE #define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 200 +#define Z_MAX_POS 260 /** * Software Endstops @@ -1285,12 +1285,14 @@ * RAMPS-based boards use SERVO3_PIN for the first runout sensor. * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. */ -//#define FILAMENT_RUNOUT_SENSOR +#define FILAMENT_RUNOUT_SENSOR #if ENABLED(FILAMENT_RUNOUT_SENSOR) #define FIL_RUNOUT_ENABLED_DEFAULT true // Enable the sensor on startup. Override with M412 followed by M500. #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. + #define FIL_RUNOUT_PIN 66 + //#define FIL_RUNOUT2_PIN 67 - #define FIL_RUNOUT_STATE LOW // Pin state indicating that filament is NOT present. + #define FIL_RUNOUT_STATE HIGH // Pin state indicating that filament is NOT present. #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. //#define WATCH_ALL_RUNOUT_SENSORS // Execute runout script on any triggering sensor, not only for the active extruder. @@ -1387,7 +1389,7 @@ */ //#define AUTO_BED_LEVELING_3POINT //#define AUTO_BED_LEVELING_LINEAR -//#define AUTO_BED_LEVELING_BILINEAR +#define AUTO_BED_LEVELING_BILINEAR //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING @@ -1454,7 +1456,7 @@ #if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR) // Set the number of grid points per dimension. - #define GRID_MAX_POINTS_X 3 + #define GRID_MAX_POINTS_X 5 #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X // Probe along the Y axis, advancing X after each column @@ -1518,7 +1520,7 @@ * Add a bed leveling sub-menu for ABL or MBL. * Include a guided procedure if manual probing is enabled. */ -//#define LCD_BED_LEVELING +#define LCD_BED_LEVELING #if ENABLED(LCD_BED_LEVELING) #define MESH_EDIT_Z_STEP 0.025 // (mm) Step size while manually probing Z axis. @@ -1527,7 +1529,7 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS +#define LEVEL_BED_CORNERS #if ENABLED(LEVEL_BED_CORNERS) #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets @@ -1595,7 +1597,7 @@ #endif // Homing speeds (mm/min) -#define HOMING_FEEDRATE_MM_M { (50*60), (50*60), (4*60) } +#define HOMING_FEEDRATE_MM_M { (80*60), (80*60), (20*60) } // Validate that endstops are triggered on homing moves #define VALIDATE_HOMING_ENDSTOPS @@ -1672,12 +1674,12 @@ * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) */ -//#define EEPROM_SETTINGS // Persistent storage with M500 and M501 +#define EEPROM_SETTINGS // Persistent storage with M500 and M501 //#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. #define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load #if ENABLED(EEPROM_SETTINGS) - //#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. + #define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. #endif // @@ -1706,14 +1708,14 @@ // Preheat Constants - Up to 5 are supported without changes // #define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 180 -#define PREHEAT_1_TEMP_BED 70 +#define PREHEAT_1_TEMP_HOTEND 190 +#define PREHEAT_1_TEMP_BED 60 #define PREHEAT_1_TEMP_CHAMBER 35 #define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 #define PREHEAT_2_LABEL "ABS" #define PREHEAT_2_TEMP_HOTEND 240 -#define PREHEAT_2_TEMP_BED 110 +#define PREHEAT_2_TEMP_BED 90 #define PREHEAT_2_TEMP_CHAMBER 35 #define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 @@ -1728,11 +1730,11 @@ * P1 Raise the nozzle always to Z-park height. * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. */ -//#define NOZZLE_PARK_FEATURE +#define NOZZLE_PARK_FEATURE #if ENABLED(NOZZLE_PARK_FEATURE) // Specify a park position as { X, Y, Z_raise } - #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 } + #define NOZZLE_PARK_POINT { 3, (Y_MAX_POS - 3), 10 } //#define NOZZLE_PARK_X_ONLY // X move only is required to park //#define NOZZLE_PARK_Y_ONLY // Y move only is required to park #define NOZZLE_PARK_Z_RAISE_MIN 2 // (mm) Always raise Z by at least this distance @@ -1845,7 +1847,7 @@ * * View the current statistics with M78. */ -//#define PRINTCOUNTER +#define PRINTCOUNTER #if ENABLED(PRINTCOUNTER) #define PRINTCOUNTER_SAVE_INTERVAL 60 // (minutes) EEPROM save interval during print #endif @@ -1936,7 +1938,7 @@ * SD Card support is disabled by default. If your controller has an SD slot, * you must uncomment the following option or it won't work. */ -//#define SDSUPPORT +#define SDSUPPORT /** * SD CARD: ENABLE CRC @@ -1960,7 +1962,7 @@ // This option overrides the default number of encoder pulses needed to // produce one step. Should be increased for high-resolution encoders. // -//#define ENCODER_PULSES_PER_STEP 4 +#define ENCODER_PULSES_PER_STEP 2 // // Use this option to override the number of step signals required to @@ -2014,7 +2016,7 @@ // If you have a speaker that can produce tones, enable it here. // By default Marlin assumes you have a buzzer with a fixed frequency. // -//#define SPEAKER +#define SPEAKER // // The duration and frequency for the UI feedback sound. @@ -2037,7 +2039,7 @@ // // Note: Usually sold with a white PCB. // -//#define REPRAP_DISCOUNT_SMART_CONTROLLER +#define REPRAP_DISCOUNT_SMART_CONTROLLER // // GT2560 (YHCB2004) LCD Display diff --git a/config/examples/Geeetech/A10/Configuration_adv.h b/config/examples/Geeetech/A10/Configuration_adv.h index 5335fa012a..169c9638fb 100644 --- a/config/examples/Geeetech/A10/Configuration_adv.h +++ b/config/examples/Geeetech/A10/Configuration_adv.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Geeetech/A10" + /** * Configuration_adv.h * @@ -867,7 +869,7 @@ // On a 300mm bed a 5% grade would give a misalignment of ~1.5cm #define G34_MAX_GRADE 5 // (%) Maximum incline that G34 will handle - #define Z_STEPPER_ALIGN_ITERATIONS 5 // Number of iterations to apply during alignment + #define Z_STEPPER_ALIGN_ITERATIONS 3 // Number of iterations to apply during alignment #define Z_STEPPER_ALIGN_ACC 0.02 // Stop iterating early if the accuracy is better than this #define RESTORE_LEVELING_AFTER_G34 // Restore leveling after G34 is done? // After G34, re-home Z (G28 Z) or just calculate it from the last probe heights? @@ -1175,7 +1177,7 @@ #endif // Include a page of printer information in the LCD Main Menu - //#define LCD_INFO_MENU + #define LCD_INFO_MENU #if ENABLED(LCD_INFO_MENU) //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages #endif @@ -1229,7 +1231,7 @@ #endif // Scroll a longer status message into view - //#define STATUS_MESSAGE_SCROLLING + #define STATUS_MESSAGE_SCROLLING // On the Info Screen, display XY with one decimal place when possible //#define LCD_DECIMAL_SMALL_XY @@ -1301,7 +1303,7 @@ //#define BROWSE_MEDIA_ON_INSERT // Open the file browser when media is inserted - #define EVENT_GCODE_SD_ABORT "G28XY" // G-code to run on SD Abort Print (e.g., "G28XY" or "G27") + #define EVENT_GCODE_SD_ABORT "G27" // G-code to run on SD Abort Print (e.g., "G28XY" or "G27") #if ENABLED(PRINTER_EVENT_LEDS) #define PE_LEDS_COMPLETED_TIME (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination @@ -1381,10 +1383,10 @@ //#define UTF_FILENAME_SUPPORT // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT + #define LONG_FILENAME_HOST_SUPPORT // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES + #define SCROLL_LONG_FILENAMES // Leave the heaters on after Stop Print (not recommended!) //#define SD_ABORT_NO_COOLDOWN @@ -1790,7 +1792,7 @@ * * Warning: Does not respect endstops! */ -//#define BABYSTEPPING +#define BABYSTEPPING #if ENABLED(BABYSTEPPING) //#define INTEGRATED_BABYSTEPPING // EXPERIMENTAL integration of babystepping into the Stepper ISR //#define BABYSTEP_WITHOUT_HOMING @@ -1837,7 +1839,7 @@ * * See https://marlinfw.org/docs/features/lin_advance.html for full instructions. */ -//#define LIN_ADVANCE +#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) //#define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed @@ -2311,7 +2313,7 @@ * * Enable PARK_HEAD_ON_PAUSE to add the G-code M125 Pause and Park. */ -//#define ADVANCED_PAUSE_FEATURE +#define ADVANCED_PAUSE_FEATURE #if ENABLED(ADVANCED_PAUSE_FEATURE) #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. @@ -2349,7 +2351,7 @@ #define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed. #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change. - //#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. + #define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. //#define HOME_BEFORE_FILAMENT_CHANGE // If needed, home before parking for filament change //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. diff --git a/config/examples/Geeetech/A10D/Configuration.h b/config/examples/Geeetech/A10D/Configuration.h index 78c2dc9160..a4832c1aba 100644 --- a/config/examples/Geeetech/A10D/Configuration.h +++ b/config/examples/Geeetech/A10D/Configuration.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Geeetech/A10D" + /** * Configuration.h * @@ -69,7 +71,7 @@ // @section info // Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes. +#define STRING_CONFIG_H_AUTHOR "(default)" // Who made the changes. //#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) /** @@ -134,7 +136,7 @@ // Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_RAMPS_14_EFB + #define MOTHERBOARD BOARD_GT2560_V3 #endif // Name displayed in the LCD "Ready" message and Info menu @@ -148,7 +150,7 @@ // This defines the number of extruders // :[0, 1, 2, 3, 4, 5, 6, 7, 8] -#define EXTRUDERS 1 +#define EXTRUDERS 2 // Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc. #define DEFAULT_NOMINAL_FILAMENT_DIA 1.75 @@ -297,9 +299,9 @@ #define MIXING_STEPPERS 2 // Number of steppers in your mixing extruder #define MIXING_VIRTUAL_TOOLS 16 // Use the Virtual Tool method with M163 and M164 //#define DIRECT_MIXING_IN_G1 // Allow ABCDHI mix factors in G1 movement commands - //#define GRADIENT_MIX // Support for gradient mixing with M166 and LCD + #define GRADIENT_MIX // Support for gradient mixing with M166 and LCD #if ENABLED(GRADIENT_MIX) - //#define GRADIENT_VTOOL // Add M166 T to use a V-tool index as a Gradient alias + #define GRADIENT_VTOOL // Add M166 T to use a V-tool index as a Gradient alias #endif #endif @@ -417,14 +419,14 @@ * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. */ #define TEMP_SENSOR_0 1 -#define TEMP_SENSOR_1 0 +#define TEMP_SENSOR_1 1 #define TEMP_SENSOR_2 0 #define TEMP_SENSOR_3 0 #define TEMP_SENSOR_4 0 #define TEMP_SENSOR_5 0 #define TEMP_SENSOR_6 0 #define TEMP_SENSOR_7 0 -#define TEMP_SENSOR_BED 0 +#define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 #define TEMP_SENSOR_COOLER 0 @@ -506,20 +508,20 @@ #if ENABLED(PIDTEMP) //#define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) - //#define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) + //#define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) // Set/get with gcode: M301 E[extruder number, 0-2] #if ENABLED(PID_PARAMS_PER_HOTEND) // Specify between 1 and HOTENDS values per array. // If fewer than EXTRUDER values are provided, the last element will be repeated. - #define DEFAULT_Kp_LIST { 22.20, 22.20 } - #define DEFAULT_Ki_LIST { 1.08, 1.08 } - #define DEFAULT_Kd_LIST { 114.00, 114.00 } + #define DEFAULT_Kp_LIST { 226.93, 226.93 } + #define DEFAULT_Ki_LIST { 0.43, 0.43 } + #define DEFAULT_Kd_LIST { 854.89, 854.89 } #else - #define DEFAULT_Kp 22.20 - #define DEFAULT_Ki 1.08 - #define DEFAULT_Kd 114.00 + #define DEFAULT_Kp 226.93 + #define DEFAULT_Ki 0.43 + #define DEFAULT_Kd 854.89 #endif #endif // PIDTEMP @@ -540,7 +542,7 @@ * heater. If your configuration is significantly different than this and you don't understand * the issues involved, don't use bed PID until someone else verifies that your hardware works. */ -//#define PIDTEMPBED +#define PIDTEMPBED //#define BED_LIMIT_SWITCHING @@ -556,11 +558,10 @@ //#define MIN_BED_POWER 0 //#define PID_BED_DEBUG // Sends debug data to the serial port. - // 120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - // from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) - #define DEFAULT_bedKp 10.00 - #define DEFAULT_bedKi .023 - #define DEFAULT_bedKd 305.4 + // MeCreator2 generated by Autotune + #define DEFAULT_bedKp 182.46 // 175.68 189.95 + #define DEFAULT_bedKi 35.92 // 34.59 37.40 + #define DEFAULT_bedKd 231.70 // 223.07 241.19 // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. #endif // PIDTEMPBED @@ -627,14 +628,14 @@ * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** */ #define PREVENT_COLD_EXTRUSION -#define EXTRUDE_MINTEMP 170 +#define EXTRUDE_MINTEMP 100 /** * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. * Note: For Bowden Extruders make this large enough to allow load/unload. */ #define PREVENT_LENGTHY_EXTRUDE -#define EXTRUDE_MAXLENGTH 200 +#define EXTRUDE_MAXLENGTH 1000 //=========================================================================== //======================== Thermal Runaway Protection ======================= @@ -717,13 +718,13 @@ #endif // Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define X_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_PROBE_ENDSTOP_INVERTING false // Set to true to invert the logic of the probe. +#define X_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Y_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Z_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define X_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Y_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Z_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Z_MIN_PROBE_ENDSTOP_INVERTING true // Set to true to invert the logic of the probe. /** * Stepper Drivers @@ -752,7 +753,7 @@ //#define Z3_DRIVER_TYPE A4988 //#define Z4_DRIVER_TYPE A4988 #define E0_DRIVER_TYPE A4988 -//#define E1_DRIVER_TYPE A4988 +#define E1_DRIVER_TYPE A4988 //#define E2_DRIVER_TYPE A4988 //#define E3_DRIVER_TYPE A4988 //#define E4_DRIVER_TYPE A4988 @@ -806,14 +807,14 @@ * Override with M92 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 500 } +#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 98 } /** * Default Max Feed Rate (mm/s) * Override with M203 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 } +#define DEFAULT_MAX_FEEDRATE { 500, 500, 5, 25 } //#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 #if ENABLED(LIMITED_MAX_FR_EDITING) @@ -826,7 +827,7 @@ * Override with M201 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 } +#define DEFAULT_MAX_ACCELERATION { 500, 500, 100, 5000 } //#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 #if ENABLED(LIMITED_MAX_ACCEL_EDITING) @@ -841,9 +842,9 @@ * M204 R Retract Acceleration * M204 T Travel Acceleration */ -#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves +#define DEFAULT_ACCELERATION 1000 // X, Y, Z and E acceleration for printing moves +#define DEFAULT_RETRACT_ACCELERATION 2000 // E acceleration for retracts +#define DEFAULT_TRAVEL_ACCELERATION 1000 // X, Y, Z acceleration for travel (non printing) moves /** * Default Jerk limits (mm/s) @@ -857,7 +858,7 @@ #if ENABLED(CLASSIC_JERK) #define DEFAULT_XJERK 10.0 #define DEFAULT_YJERK 10.0 - #define DEFAULT_ZJERK 0.3 + #define DEFAULT_ZJERK 0.4 //#define TRAVEL_EXTRA_XYJERK 0.0 // Additional jerk allowance for all travel moves @@ -877,7 +878,7 @@ * https://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html */ #if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.013 // (mm) Distance from real junction edge + #define JUNCTION_DEVIATION_MM 0.04 // (mm) Distance from real junction edge #define JD_HANDLE_SMALL_SEGMENTS // Use curvature estimation instead of just the junction angle // for small segments (< 1mm) with large junction angles (> 135°). #endif @@ -940,7 +941,7 @@ * Use G29 repeatedly, adjusting the Z height at each point with movement commands * or (with LCD_BED_LEVELING) the LCD controller. */ -//#define PROBE_MANUALLY +#define PROBE_MANUALLY /** * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. @@ -1055,7 +1056,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +#define NOZZLE_TO_PROBE_OFFSET { -37, 0, 0 } // Most probes should stay away from the edges of the bed, but // with NOZZLE_AS_PROBE this can be negative for a wider probing area. @@ -1106,7 +1107,7 @@ * A total of 2 does fast/slow probes with a weighted average. * A total of 3 or more adds more slow probes, taking the average. */ -//#define MULTIPLE_PROBING 2 +#define MULTIPLE_PROBING 2 //#define EXTRA_PROBING 1 /** @@ -1123,16 +1124,16 @@ * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. */ -#define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow -#define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points -#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes -//#define Z_AFTER_PROBING 5 // Z position after probing is done +#define Z_CLEARANCE_DEPLOY_PROBE 5 // Z Clearance for Deploy/Stow +#define Z_CLEARANCE_BETWEEN_PROBES 3 // Z Clearance between probe points +#define Z_CLEARANCE_MULTI_PROBE 2 // Z Clearance between multiple probes +#define Z_AFTER_PROBING 3 // Z position after probing is done #define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping // For M851 give a range for adjusting the Z probe offset -#define Z_PROBE_OFFSET_RANGE_MIN -20 -#define Z_PROBE_OFFSET_RANGE_MAX 20 +#define Z_PROBE_OFFSET_RANGE_MIN -10 +#define Z_PROBE_OFFSET_RANGE_MAX 0 // Enable the M48 repeatability test to test probe accuracy //#define Z_MIN_PROBE_REPEATABILITY_TEST @@ -1150,14 +1151,14 @@ * These options are most useful for the BLTouch probe, but may also improve * readings with inductive probes and piezo sensors. */ -//#define PROBING_HEATERS_OFF // Turn heaters off when probing +//#define PROBING_HEATERS_OFF // Turn heaters off when probing #if ENABLED(PROBING_HEATERS_OFF) - //#define WAIT_FOR_BED_HEATER // Wait for bed to heat back up between probes (to improve accuracy) + #define WAIT_FOR_BED_HEATER // Wait for bed to heat back up between probes (to improve accuracy) //#define WAIT_FOR_HOTEND // Wait for hotend to heat back up between probes (to improve accuracy & prevent cold extrude) #endif -//#define PROBING_FANS_OFF // Turn fans off when probing +//#define PROBING_FANS_OFF // Turn fans off when probing //#define PROBING_STEPPERS_OFF // Turn steppers off (unless needed to hold position) when probing -//#define DELAY_BEFORE_PROBING 200 // (ms) To prevent vibrations from triggering piezo sensors +//#define DELAY_BEFORE_PROBING 100 // (ms) To prevent vibrations from triggering piezo sensors // Require minimum nozzle and/or bed temperature for probing //#define PREHEAT_BEFORE_PROBING @@ -1190,15 +1191,15 @@ // @section machine // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR false +#define INVERT_X_DIR true #define INVERT_Y_DIR true #define INVERT_Z_DIR false // @section extruder // For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR false -#define INVERT_E1_DIR false +#define INVERT_E0_DIR true +#define INVERT_E1_DIR true #define INVERT_E2_DIR false #define INVERT_E3_DIR false #define INVERT_E4_DIR false @@ -1232,8 +1233,8 @@ // @section machine // The size of the printable area -#define X_BED_SIZE 200 -#define Y_BED_SIZE 200 +#define X_BED_SIZE 220 +#define Y_BED_SIZE 220 // Travel limits (mm) after homing, corresponding to endstop positions. #define X_MIN_POS 0 @@ -1241,7 +1242,7 @@ #define Z_MIN_POS 0 #define X_MAX_POS X_BED_SIZE #define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 200 +#define Z_MAX_POS 260 /** * Software Endstops @@ -1288,9 +1289,11 @@ //#define FILAMENT_RUNOUT_SENSOR #if ENABLED(FILAMENT_RUNOUT_SENSOR) #define FIL_RUNOUT_ENABLED_DEFAULT true // Enable the sensor on startup. Override with M412 followed by M500. - #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. + #define NUM_RUNOUT_SENSORS 2 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. + #define FIL_RUNOUT_PIN 66 + #define FIL_RUNOUT2_PIN 67 - #define FIL_RUNOUT_STATE LOW // Pin state indicating that filament is NOT present. + #define FIL_RUNOUT_STATE HIGH // Pin state indicating that filament is NOT present. #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. //#define WATCH_ALL_RUNOUT_SENSORS // Execute runout script on any triggering sensor, not only for the active extruder. @@ -1388,7 +1391,7 @@ //#define AUTO_BED_LEVELING_3POINT //#define AUTO_BED_LEVELING_LINEAR //#define AUTO_BED_LEVELING_BILINEAR -//#define AUTO_BED_LEVELING_UBL +#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING /** @@ -1396,7 +1399,7 @@ * these options to restore the prior leveling state or to always enable * leveling immediately after G28. */ -//#define RESTORE_LEVELING_AFTER_G28 +#define RESTORE_LEVELING_AFTER_G28 //#define ENABLE_LEVELING_AFTER_G28 /** @@ -1454,7 +1457,7 @@ #if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR) // Set the number of grid points per dimension. - #define GRID_MAX_POINTS_X 3 + #define GRID_MAX_POINTS_X 5 #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X // Probe along the Y axis, advancing X after each column @@ -1486,8 +1489,8 @@ //#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh - #define MESH_INSET 1 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. + #define MESH_INSET 0 // Set Mesh bounds as an inset region of the bed + #define GRID_MAX_POINTS_X 5 // Don't use more than 15 points per axis, implementation limited. #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X //#define UBL_HILBERT_CURVE // Use Hilbert distribution for less travel when probing multiple points @@ -1495,7 +1498,7 @@ #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 - //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used + #define UBL_Z_RAISE_WHEN_OFF_MESH 0 // When the nozzle is off the mesh, this value is used // as the Z-Height correction value. //#define UBL_MESH_WIZARD // Run several commands in a row to get a complete mesh @@ -1527,13 +1530,13 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS +#define LEVEL_BED_CORNERS #if ENABLED(LEVEL_BED_CORNERS) #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner + #define LEVEL_CENTER_TOO // Move to the center after the last corner //#define LEVEL_CORNERS_USE_PROBE #if ENABLED(LEVEL_CORNERS_USE_PROBE) #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 @@ -1595,7 +1598,7 @@ #endif // Homing speeds (mm/min) -#define HOMING_FEEDRATE_MM_M { (50*60), (50*60), (4*60) } +#define HOMING_FEEDRATE_MM_M { (40*60), (40*60), (4*60) } // Validate that endstops are triggered on homing moves #define VALIDATE_HOMING_ENDSTOPS @@ -1672,12 +1675,12 @@ * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) */ -//#define EEPROM_SETTINGS // Persistent storage with M500 and M501 +#define EEPROM_SETTINGS // Persistent storage with M500 and M501 //#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. #define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load #if ENABLED(EEPROM_SETTINGS) - //#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. + #define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. #endif // @@ -1706,14 +1709,14 @@ // Preheat Constants - Up to 5 are supported without changes // #define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 180 -#define PREHEAT_1_TEMP_BED 70 +#define PREHEAT_1_TEMP_HOTEND 200 +#define PREHEAT_1_TEMP_BED 60 #define PREHEAT_1_TEMP_CHAMBER 35 #define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 #define PREHEAT_2_LABEL "ABS" #define PREHEAT_2_TEMP_HOTEND 240 -#define PREHEAT_2_TEMP_BED 110 +#define PREHEAT_2_TEMP_BED 90 #define PREHEAT_2_TEMP_CHAMBER 35 #define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 @@ -1728,11 +1731,11 @@ * P1 Raise the nozzle always to Z-park height. * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. */ -//#define NOZZLE_PARK_FEATURE +#define NOZZLE_PARK_FEATURE #if ENABLED(NOZZLE_PARK_FEATURE) // Specify a park position as { X, Y, Z_raise } - #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 } + #define NOZZLE_PARK_POINT { 3, (Y_MAX_POS - 3), 10 } //#define NOZZLE_PARK_X_ONLY // X move only is required to park //#define NOZZLE_PARK_Y_ONLY // Y move only is required to park #define NOZZLE_PARK_Z_RAISE_MIN 2 // (mm) Always raise Z by at least this distance @@ -1936,7 +1939,7 @@ * SD Card support is disabled by default. If your controller has an SD slot, * you must uncomment the following option or it won't work. */ -//#define SDSUPPORT +#define SDSUPPORT /** * SD CARD: ENABLE CRC @@ -1960,7 +1963,7 @@ // This option overrides the default number of encoder pulses needed to // produce one step. Should be increased for high-resolution encoders. // -//#define ENCODER_PULSES_PER_STEP 4 +//#define ENCODER_PULSES_PER_STEP 2 // // Use this option to override the number of step signals required to @@ -2014,7 +2017,7 @@ // If you have a speaker that can produce tones, enable it here. // By default Marlin assumes you have a buzzer with a fixed frequency. // -//#define SPEAKER +#define SPEAKER // // The duration and frequency for the UI feedback sound. @@ -2037,7 +2040,7 @@ // // Note: Usually sold with a white PCB. // -//#define REPRAP_DISCOUNT_SMART_CONTROLLER +#define REPRAP_DISCOUNT_SMART_CONTROLLER // // GT2560 (YHCB2004) LCD Display @@ -2063,7 +2066,6 @@ // //#define ULTIPANEL -// // PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3) // https://reprap.org/wiki/PanelOne // @@ -2618,7 +2620,7 @@ // Use software PWM to drive the fan, as for the heaters. This uses a very low frequency // which is not as annoying as with the hardware PWM. On the other hand, if this frequency // is too low, you should also increment SOFT_PWM_SCALE. -//#define FAN_SOFT_PWM +#define FAN_SOFT_PWM // Incrementing this by 1 will double the software PWM frequency, // affecting heaters, and the fan if FAN_SOFT_PWM is enabled. diff --git a/config/examples/Geeetech/A10D/Configuration_adv.h b/config/examples/Geeetech/A10D/Configuration_adv.h index 5335fa012a..49a019e600 100644 --- a/config/examples/Geeetech/A10D/Configuration_adv.h +++ b/config/examples/Geeetech/A10D/Configuration_adv.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Geeetech/A10D" + /** * Configuration_adv.h * @@ -741,7 +743,7 @@ //#define HOMING_BACKOFF_POST_MM { 2, 2, 2 } // (mm) Backoff from endstops after homing -//#define QUICK_HOME // If G28 contains XY do a diagonal move first +#define QUICK_HOME // If G28 contains XY do a diagonal move first //#define HOME_Y_BEFORE_X // If G28 contains XY home Y before X //#define HOME_Z_FIRST // Home Z first. Requires a Z-MIN endstop (not a probe). //#define CODEPENDENT_XY_HOMING // If X/Y can't home without homing Y/X first @@ -867,7 +869,7 @@ // On a 300mm bed a 5% grade would give a misalignment of ~1.5cm #define G34_MAX_GRADE 5 // (%) Maximum incline that G34 will handle - #define Z_STEPPER_ALIGN_ITERATIONS 5 // Number of iterations to apply during alignment + #define Z_STEPPER_ALIGN_ITERATIONS 3 // Number of iterations to apply during alignment #define Z_STEPPER_ALIGN_ACC 0.02 // Stop iterating early if the accuracy is better than this #define RESTORE_LEVELING_AFTER_G34 // Restore leveling after G34 is done? // After G34, re-home Z (G28 Z) or just calculate it from the last probe heights? @@ -1175,7 +1177,7 @@ #endif // Include a page of printer information in the LCD Main Menu - //#define LCD_INFO_MENU + #define LCD_INFO_MENU #if ENABLED(LCD_INFO_MENU) //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages #endif @@ -1229,7 +1231,7 @@ #endif // Scroll a longer status message into view - //#define STATUS_MESSAGE_SCROLLING + #define STATUS_MESSAGE_SCROLLING // On the Info Screen, display XY with one decimal place when possible //#define LCD_DECIMAL_SMALL_XY @@ -1301,7 +1303,7 @@ //#define BROWSE_MEDIA_ON_INSERT // Open the file browser when media is inserted - #define EVENT_GCODE_SD_ABORT "G28XY" // G-code to run on SD Abort Print (e.g., "G28XY" or "G27") + #define EVENT_GCODE_SD_ABORT "G27" // G-code to run on SD Abort Print (e.g., "G28XY" or "G27") #if ENABLED(PRINTER_EVENT_LEDS) #define PE_LEDS_COMPLETED_TIME (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination @@ -1381,10 +1383,10 @@ //#define UTF_FILENAME_SUPPORT // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT + #define LONG_FILENAME_HOST_SUPPORT // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES + #define SCROLL_LONG_FILENAMES // Leave the heaters on after Stop Print (not recommended!) //#define SD_ABORT_NO_COOLDOWN @@ -1790,7 +1792,7 @@ * * Warning: Does not respect endstops! */ -//#define BABYSTEPPING +#define BABYSTEPPING #if ENABLED(BABYSTEPPING) //#define INTEGRATED_BABYSTEPPING // EXPERIMENTAL integration of babystepping into the Stepper ISR //#define BABYSTEP_WITHOUT_HOMING @@ -1837,10 +1839,10 @@ * * See https://marlinfw.org/docs/features/lin_advance.html for full instructions. */ -//#define LIN_ADVANCE +#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) //#define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants - #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed + #define LIN_ADVANCE_K 0 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // If enabled, this will generate debug information output over USB. //#define EXPERIMENTAL_SCURVE // Enable this option to permit S-Curve Acceleration #endif @@ -2311,7 +2313,7 @@ * * Enable PARK_HEAD_ON_PAUSE to add the G-code M125 Pause and Park. */ -//#define ADVANCED_PAUSE_FEATURE +#define ADVANCED_PAUSE_FEATURE #if ENABLED(ADVANCED_PAUSE_FEATURE) #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. @@ -2349,7 +2351,7 @@ #define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed. #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change. - //#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. + #define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. //#define HOME_BEFORE_FILAMENT_CHANGE // If needed, home before parking for filament change //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. diff --git a/config/examples/Geeetech/A10M/Configuration_adv.h b/config/examples/Geeetech/A10M/Configuration_adv.h index 5335fa012a..ecc6654d1e 100644 --- a/config/examples/Geeetech/A10M/Configuration_adv.h +++ b/config/examples/Geeetech/A10M/Configuration_adv.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Geeetech/A10M" + /** * Configuration_adv.h * @@ -741,7 +743,7 @@ //#define HOMING_BACKOFF_POST_MM { 2, 2, 2 } // (mm) Backoff from endstops after homing -//#define QUICK_HOME // If G28 contains XY do a diagonal move first +#define QUICK_HOME // If G28 contains XY do a diagonal move first //#define HOME_Y_BEFORE_X // If G28 contains XY home Y before X //#define HOME_Z_FIRST // Home Z first. Requires a Z-MIN endstop (not a probe). //#define CODEPENDENT_XY_HOMING // If X/Y can't home without homing Y/X first @@ -766,7 +768,7 @@ // Safety: The probe needs time to recognize the command. // Minimum command delay (ms). Enable and increase if needed. - //#define BLTOUCH_DELAY 500 + #define BLTOUCH_DELAY 200 /** * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones: @@ -808,7 +810,7 @@ * This feature was designed for Deltabots with very fast Z moves; however, higher speed Cartesians * might be able to use it. If the machine can't raise Z fast enough the BLTouch may go into ALARM. */ - //#define BLTOUCH_HS_MODE + #define BLTOUCH_HS_MODE // Safety: Enable voltage mode settings in the LCD menu. //#define BLTOUCH_LCD_VOLTAGE_MENU @@ -867,7 +869,7 @@ // On a 300mm bed a 5% grade would give a misalignment of ~1.5cm #define G34_MAX_GRADE 5 // (%) Maximum incline that G34 will handle - #define Z_STEPPER_ALIGN_ITERATIONS 5 // Number of iterations to apply during alignment + #define Z_STEPPER_ALIGN_ITERATIONS 3 // Number of iterations to apply during alignment #define Z_STEPPER_ALIGN_ACC 0.02 // Stop iterating early if the accuracy is better than this #define RESTORE_LEVELING_AFTER_G34 // Restore leveling after G34 is done? // After G34, re-home Z (G28 Z) or just calculate it from the last probe heights? @@ -1145,8 +1147,8 @@ // Change values more rapidly when the encoder is rotated faster #define ENCODER_RATE_MULTIPLIER #if ENABLED(ENCODER_RATE_MULTIPLIER) - #define ENCODER_10X_STEPS_PER_SEC 30 // (steps/s) Encoder rate for 10x speed - #define ENCODER_100X_STEPS_PER_SEC 80 // (steps/s) Encoder rate for 100x speed + #define ENCODER_10X_STEPS_PER_SEC 10 // (steps/s) Encoder rate for 10x speed + #define ENCODER_100X_STEPS_PER_SEC 50 // (steps/s) Encoder rate for 100x speed #endif // Play a beep when the feedrate is changed from the Status Screen @@ -1175,7 +1177,7 @@ #endif // Include a page of printer information in the LCD Main Menu - //#define LCD_INFO_MENU + #define LCD_INFO_MENU #if ENABLED(LCD_INFO_MENU) //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages #endif @@ -1229,7 +1231,7 @@ #endif // Scroll a longer status message into view - //#define STATUS_MESSAGE_SCROLLING + #define STATUS_MESSAGE_SCROLLING // On the Info Screen, display XY with one decimal place when possible //#define LCD_DECIMAL_SMALL_XY @@ -1253,11 +1255,11 @@ #endif #if EITHER(HAS_MARLINUI_HD44780, IS_TFTGLCD_PANEL) - //#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing + #define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing #if ENABLED(LCD_PROGRESS_BAR) #define PROGRESS_BAR_BAR_TIME 2000 // (ms) Amount of time to show the bar - #define PROGRESS_BAR_MSG_TIME 3000 // (ms) Amount of time to show the status message - #define PROGRESS_MSG_EXPIRE 0 // (ms) Amount of time to retain the status message (0=forever) + #define PROGRESS_BAR_MSG_TIME 3500 // (ms) Amount of time to show the status message + #define PROGRESS_MSG_EXPIRE 180000 // (ms) Amount of time to retain the status message (0=forever) //#define PROGRESS_MSG_ONCE // Show the message for MSG_TIME then clear it //#define LCD_PROGRESS_BAR_TEST // Add a menu item to test the progress bar #endif @@ -1301,7 +1303,7 @@ //#define BROWSE_MEDIA_ON_INSERT // Open the file browser when media is inserted - #define EVENT_GCODE_SD_ABORT "G28XY" // G-code to run on SD Abort Print (e.g., "G28XY" or "G27") + #define EVENT_GCODE_SD_ABORT "G27" // G-code to run on SD Abort Print (e.g., "G28XY" or "G27") #if ENABLED(PRINTER_EVENT_LEDS) #define PE_LEDS_COMPLETED_TIME (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination @@ -1315,13 +1317,13 @@ * an option on the LCD screen to continue the print from the last-known * point in the file. */ - //#define POWER_LOSS_RECOVERY + #define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) //#define BACKUP_POWER_SUPPLY // Backup power / UPS to move the steppers on power loss //#define POWER_LOSS_ZRAISE 2 // (mm) Z axis raise on resume (on power loss with UPS) - //#define POWER_LOSS_PIN 44 // Pin to detect power loss. Set to -1 to disable default pin on boards without module. - //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss + #define POWER_LOSS_PIN 69 // Pin to detect power loss. Set to -1 to disable default pin on boards without module. + #define POWER_LOSS_STATE LOW // State of pin indicating power loss //#define POWER_LOSS_PULLUP // Set pullup / pulldown as appropriate for your sensor //#define POWER_LOSS_PULLDOWN //#define POWER_LOSS_PURGE_LEN 20 // (mm) Length of filament to purge on resume @@ -1361,15 +1363,15 @@ * - SDSORT_CACHE_NAMES will retain the sorted file listing in RAM. (Expensive!) * - SDSORT_DYNAMIC_RAM only uses RAM when the SD menu is visible. (Use with caution!) */ - //#define SDCARD_SORT_ALPHA + #define SDCARD_SORT_ALPHA // SD Card Sorting options #if ENABLED(SDCARD_SORT_ALPHA) #define SDSORT_LIMIT 40 // Maximum number of sorted items (10-256). Costs 27 bytes each. #define FOLDER_SORTING -1 // -1=above 0=none 1=below #define SDSORT_GCODE false // Allow turning sorting on/off with LCD and M34 G-code. - #define SDSORT_USES_RAM false // Pre-allocate a static array for faster pre-sorting. - #define SDSORT_USES_STACK false // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.) + #define SDSORT_USES_RAM true // Pre-allocate a static array for faster pre-sorting. + #define SDSORT_USES_STACK true // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.) #define SDSORT_CACHE_NAMES false // Keep sorted items in RAM longer for speedy performance. Most expensive option. #define SDSORT_DYNAMIC_RAM false // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use! #define SDSORT_CACHE_VFATS 2 // Maximum number of 13-byte VFAT entries to use for sorting. @@ -1512,14 +1514,14 @@ */ #if HAS_MARLINUI_U8GLIB // Show SD percentage next to the progress bar - //#define DOGM_SD_PERCENT + #define DOGM_SD_PERCENT // Save many cycles by drawing a hollow frame or no frame on the Info Screen //#define XYZ_NO_FRAME #define XYZ_HOLLOW_FRAME // Enable to save many cycles by drawing a hollow frame on Menu Screens - #define MENU_HOLLOW_FRAME + //#define MENU_HOLLOW_FRAME // A bigger font is available for edit items. Costs 3120 bytes of PROGMEM. // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. @@ -1569,10 +1571,10 @@ //#define STATUS_CUTTER_ANIM // Use a second bitmap to indicate spindle / laser active //#define STATUS_COOLER_ANIM // Use a second bitmap to indicate laser cooling //#define STATUS_FLOWMETER_ANIM // Use multiple bitmaps to indicate coolant flow - //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap - //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap - //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames - //#define STATUS_HEAT_PERCENT // Show heating in a progress bar + #define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap + #define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap + #define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames + #define STATUS_HEAT_PERCENT // Show heating in a progress bar //#define BOOT_MARLIN_LOGO_ANIMATED // Animated Marlin logo. Costs ~‭3260 (or ~940) bytes of PROGMEM. // Frivolous Game Options @@ -1790,7 +1792,7 @@ * * Warning: Does not respect endstops! */ -//#define BABYSTEPPING +#define BABYSTEPPING #if ENABLED(BABYSTEPPING) //#define INTEGRATED_BABYSTEPPING // EXPERIMENTAL integration of babystepping into the Stepper ISR //#define BABYSTEP_WITHOUT_HOMING @@ -1801,13 +1803,13 @@ #define BABYSTEP_MULTIPLICATOR_Z 1 // (steps or mm) Steps or millimeter distance for each Z babystep #define BABYSTEP_MULTIPLICATOR_XY 1 // (steps or mm) Steps or millimeter distance for each XY babystep - //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. + #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on doubleclick when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) - #define MOVE_Z_IDLE_MULTIPLICATOR 1 // Multiply 1mm by this factor for the move step size. + #define MOVE_Z_IDLE_MULTIPLICATOR 5 // Multiply 1mm by this factor for the move step size. #endif #endif @@ -2311,19 +2313,19 @@ * * Enable PARK_HEAD_ON_PAUSE to add the G-code M125 Pause and Park. */ -//#define ADVANCED_PAUSE_FEATURE +#define ADVANCED_PAUSE_FEATURE #if ENABLED(ADVANCED_PAUSE_FEATURE) #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. // This short retract is done immediately, before parking the nozzle. - #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast. + #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 18 // (mm/s) Unload filament feedrate. This can be pretty fast. #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload. + #define FILAMENT_CHANGE_UNLOAD_LENGTH 450 // (mm) The length of filament for a complete unload. // For Bowden, the full length of the tube and nozzle. // For direct drive, the full length of the nozzle. // Set to 0 for manual unloading. - #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE 6 // (mm/s) Slow move when starting load. - #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 0 // (mm) Slow length, to allow time to insert material. + #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE 12 // (mm/s) Slow move when starting load. + #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 450 // (mm) Slow length, to allow time to insert material. // 0 to disable start loading and skip to fast load only #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast. #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. @@ -2332,7 +2334,7 @@ // For direct drive, the full length of the nozzle. //#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted. #define ADVANCED_PAUSE_PURGE_FEEDRATE 3 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate. - #define ADVANCED_PAUSE_PURGE_LENGTH 50 // (mm) Length to extrude after loading. + #define ADVANCED_PAUSE_PURGE_LENGTH 40 // (mm) Length to extrude after loading. // Set to 0 for manual extrusion. // Filament can be extruded repeatedly from the Filament Change menu // until extrusion is consistent, and to purge old filament. @@ -3471,7 +3473,7 @@ * - M206 and M428 are disabled. * - G92 will revert to its behavior from Marlin 1.0. */ -//#define NO_WORKSPACE_OFFSETS +#define NO_WORKSPACE_OFFSETS // Extra options for the M114 "Current Position" report //#define M114_DETAIL // Use 'M114` for details to check planner calculations diff --git a/config/examples/Geeetech/A10M/Stock LCD/Configuration.h b/config/examples/Geeetech/A10M/Stock LCD/Configuration.h index 78c2dc9160..a05f870dea 100644 --- a/config/examples/Geeetech/A10M/Stock LCD/Configuration.h +++ b/config/examples/Geeetech/A10M/Stock LCD/Configuration.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Geeetech/A10M/Stock LCD" + /** * Configuration.h * @@ -134,11 +136,11 @@ // Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_RAMPS_14_EFB + #define MOTHERBOARD BOARD_GT2560_V3 #endif // Name displayed in the LCD "Ready" message and Info menu -//#define CUSTOM_MACHINE_NAME "3D Printer" +#define CUSTOM_MACHINE_NAME "Geeetech A10M" // Printer's unique ID, used by some programs to differentiate between machines. // Choose your own or use a service like https://www.uuidgenerator.net/version4 @@ -292,14 +294,14 @@ * - This implementation supports up to two mixing extruders. * - Enable DIRECT_MIXING_IN_G1 for M165 and mixing in G1 (from Pia Taubert's reference implementation). */ -//#define MIXING_EXTRUDER +#define MIXING_EXTRUDER #if ENABLED(MIXING_EXTRUDER) #define MIXING_STEPPERS 2 // Number of steppers in your mixing extruder #define MIXING_VIRTUAL_TOOLS 16 // Use the Virtual Tool method with M163 and M164 //#define DIRECT_MIXING_IN_G1 // Allow ABCDHI mix factors in G1 movement commands - //#define GRADIENT_MIX // Support for gradient mixing with M166 and LCD + #define GRADIENT_MIX // Support for gradient mixing with M166 and LCD #if ENABLED(GRADIENT_MIX) - //#define GRADIENT_VTOOL // Add M166 T to use a V-tool index as a Gradient alias + #define GRADIENT_VTOOL // Add M166 T to use a V-tool index as a Gradient alias #endif #endif @@ -424,7 +426,7 @@ #define TEMP_SENSOR_5 0 #define TEMP_SENSOR_6 0 #define TEMP_SENSOR_7 0 -#define TEMP_SENSOR_BED 0 +#define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 #define TEMP_SENSOR_COOLER 0 @@ -506,20 +508,21 @@ #if ENABLED(PIDTEMP) //#define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) - //#define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) + #define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) // Set/get with gcode: M301 E[extruder number, 0-2] + // A10M [@thinkyhead] #if ENABLED(PID_PARAMS_PER_HOTEND) // Specify between 1 and HOTENDS values per array. // If fewer than EXTRUDER values are provided, the last element will be repeated. - #define DEFAULT_Kp_LIST { 22.20, 22.20 } - #define DEFAULT_Ki_LIST { 1.08, 1.08 } - #define DEFAULT_Kd_LIST { 114.00, 114.00 } + #define DEFAULT_Kp_LIST { 45.80, 45.80 } + #define DEFAULT_Ki_LIST { 3.61, 3.61 } + #define DEFAULT_Kd_LIST { 145.39, 145.39 } #else - #define DEFAULT_Kp 22.20 - #define DEFAULT_Ki 1.08 - #define DEFAULT_Kd 114.00 + #define DEFAULT_Kp 45.80 + #define DEFAULT_Ki 3.61 + #define DEFAULT_Kd 145.39 #endif #endif // PIDTEMP @@ -540,7 +543,7 @@ * heater. If your configuration is significantly different than this and you don't understand * the issues involved, don't use bed PID until someone else verifies that your hardware works. */ -//#define PIDTEMPBED +#define PIDTEMPBED //#define BED_LIMIT_SWITCHING @@ -556,11 +559,10 @@ //#define MIN_BED_POWER 0 //#define PID_BED_DEBUG // Sends debug data to the serial port. - // 120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - // from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) - #define DEFAULT_bedKp 10.00 - #define DEFAULT_bedKi .023 - #define DEFAULT_bedKd 305.4 + // MeCreator2 generated by Autotune + #define DEFAULT_bedKp 182.46 // 175.68 189.95 + #define DEFAULT_bedKi 35.92 // 34.59 37.40 + #define DEFAULT_bedKd 231.70 // 223.07 241.19 // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. #endif // PIDTEMPBED @@ -634,7 +636,7 @@ * Note: For Bowden Extruders make this large enough to allow load/unload. */ #define PREVENT_LENGTHY_EXTRUDE -#define EXTRUDE_MAXLENGTH 200 +#define EXTRUDE_MAXLENGTH 450 //=========================================================================== //======================== Thermal Runaway Protection ======================= @@ -717,13 +719,13 @@ #endif // Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define X_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_PROBE_ENDSTOP_INVERTING false // Set to true to invert the logic of the probe. +#define X_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Y_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Z_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define X_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Y_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Z_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Z_MIN_PROBE_ENDSTOP_INVERTING true // Set to true to invert the logic of the probe. /** * Stepper Drivers @@ -806,14 +808,14 @@ * Override with M92 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 500 } +#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 430 } /** * Default Max Feed Rate (mm/s) * Override with M203 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 } +#define DEFAULT_MAX_FEEDRATE { 500, 500, 5, 25 } //#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 #if ENABLED(LIMITED_MAX_FR_EDITING) @@ -826,7 +828,7 @@ * Override with M201 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 } +#define DEFAULT_MAX_ACCELERATION { 500, 500, 100, 5000 } //#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 #if ENABLED(LIMITED_MAX_ACCEL_EDITING) @@ -841,9 +843,9 @@ * M204 R Retract Acceleration * M204 T Travel Acceleration */ -#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves +#define DEFAULT_ACCELERATION 1000 // X, Y, Z and E acceleration for printing moves +#define DEFAULT_RETRACT_ACCELERATION 2000 // E acceleration for retracts +#define DEFAULT_TRAVEL_ACCELERATION 1000 // X, Y, Z acceleration for travel (non printing) moves /** * Default Jerk limits (mm/s) @@ -857,7 +859,7 @@ #if ENABLED(CLASSIC_JERK) #define DEFAULT_XJERK 10.0 #define DEFAULT_YJERK 10.0 - #define DEFAULT_ZJERK 0.3 + #define DEFAULT_ZJERK 0.4 //#define TRAVEL_EXTRA_XYJERK 0.0 // Additional jerk allowance for all travel moves @@ -877,7 +879,7 @@ * https://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html */ #if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.013 // (mm) Distance from real junction edge + #define JUNCTION_DEVIATION_MM 0.04 // (mm) Distance from real junction edge #define JD_HANDLE_SMALL_SEGMENTS // Use curvature estimation instead of just the junction angle // for small segments (< 1mm) with large junction angles (> 135°). #endif @@ -940,7 +942,7 @@ * Use G29 repeatedly, adjusting the Z height at each point with movement commands * or (with LCD_BED_LEVELING) the LCD controller. */ -//#define PROBE_MANUALLY +#define PROBE_MANUALLY /** * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. @@ -1055,7 +1057,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +#define NOZZLE_TO_PROBE_OFFSET { -37, 0, -3.6 } // Most probes should stay away from the edges of the bed, but // with NOZZLE_AS_PROBE this can be negative for a wider probing area. @@ -1065,7 +1067,7 @@ #define XY_PROBE_FEEDRATE (133*60) // Feedrate (mm/min) for the first approach when double-probing (MULTIPLE_PROBING == 2) -#define Z_PROBE_FEEDRATE_FAST (4*60) +#define Z_PROBE_FEEDRATE_FAST (20*60) // Feedrate (mm/min) for the "accurate" probe of each point #define Z_PROBE_FEEDRATE_SLOW (Z_PROBE_FEEDRATE_FAST / 2) @@ -1106,7 +1108,7 @@ * A total of 2 does fast/slow probes with a weighted average. * A total of 3 or more adds more slow probes, taking the average. */ -//#define MULTIPLE_PROBING 2 +#define MULTIPLE_PROBING 2 //#define EXTRA_PROBING 1 /** @@ -1123,16 +1125,16 @@ * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. */ -#define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow -#define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points -#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes -//#define Z_AFTER_PROBING 5 // Z position after probing is done +#define Z_CLEARANCE_DEPLOY_PROBE 5 // Z Clearance for Deploy/Stow +#define Z_CLEARANCE_BETWEEN_PROBES 3 // Z Clearance between probe points +#define Z_CLEARANCE_MULTI_PROBE 2 // Z Clearance between multiple probes +#define Z_AFTER_PROBING 3 // Z position after probing is done #define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping // For M851 give a range for adjusting the Z probe offset -#define Z_PROBE_OFFSET_RANGE_MIN -20 -#define Z_PROBE_OFFSET_RANGE_MAX 20 +#define Z_PROBE_OFFSET_RANGE_MIN -5 +#define Z_PROBE_OFFSET_RANGE_MAX 0 // Enable the M48 repeatability test to test probe accuracy //#define Z_MIN_PROBE_REPEATABILITY_TEST @@ -1150,14 +1152,14 @@ * These options are most useful for the BLTouch probe, but may also improve * readings with inductive probes and piezo sensors. */ -//#define PROBING_HEATERS_OFF // Turn heaters off when probing +#define PROBING_HEATERS_OFF // Turn heaters off when probing #if ENABLED(PROBING_HEATERS_OFF) - //#define WAIT_FOR_BED_HEATER // Wait for bed to heat back up between probes (to improve accuracy) + #define WAIT_FOR_BED_HEATER // Wait for bed to heat back up between probes (to improve accuracy) //#define WAIT_FOR_HOTEND // Wait for hotend to heat back up between probes (to improve accuracy & prevent cold extrude) #endif -//#define PROBING_FANS_OFF // Turn fans off when probing +#define PROBING_FANS_OFF // Turn fans off when probing //#define PROBING_STEPPERS_OFF // Turn steppers off (unless needed to hold position) when probing -//#define DELAY_BEFORE_PROBING 200 // (ms) To prevent vibrations from triggering piezo sensors +#define DELAY_BEFORE_PROBING 100 // (ms) To prevent vibrations from triggering piezo sensors // Require minimum nozzle and/or bed temperature for probing //#define PREHEAT_BEFORE_PROBING @@ -1190,7 +1192,7 @@ // @section machine // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR false +#define INVERT_X_DIR true #define INVERT_Y_DIR true #define INVERT_Z_DIR false @@ -1232,16 +1234,16 @@ // @section machine // The size of the printable area -#define X_BED_SIZE 200 -#define Y_BED_SIZE 200 +#define X_BED_SIZE 230 +#define Y_BED_SIZE 230 // Travel limits (mm) after homing, corresponding to endstop positions. -#define X_MIN_POS 0 -#define Y_MIN_POS 0 +#define X_MIN_POS -10 +#define Y_MIN_POS -5 #define Z_MIN_POS 0 #define X_MAX_POS X_BED_SIZE #define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 200 +#define Z_MAX_POS 260 /** * Software Endstops @@ -1285,12 +1287,14 @@ * RAMPS-based boards use SERVO3_PIN for the first runout sensor. * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. */ -//#define FILAMENT_RUNOUT_SENSOR +#define FILAMENT_RUNOUT_SENSOR #if ENABLED(FILAMENT_RUNOUT_SENSOR) #define FIL_RUNOUT_ENABLED_DEFAULT true // Enable the sensor on startup. Override with M412 followed by M500. - #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. + #define NUM_RUNOUT_SENSORS 2 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. + #define FIL_RUNOUT_PIN 66 + #define FIL_RUNOUT2_PIN 67 - #define FIL_RUNOUT_STATE LOW // Pin state indicating that filament is NOT present. + #define FIL_RUNOUT_STATE HIGH // Pin state indicating that filament is NOT present. #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. //#define WATCH_ALL_RUNOUT_SENSORS // Execute runout script on any triggering sensor, not only for the active extruder. @@ -1387,7 +1391,7 @@ */ //#define AUTO_BED_LEVELING_3POINT //#define AUTO_BED_LEVELING_LINEAR -//#define AUTO_BED_LEVELING_BILINEAR +#define AUTO_BED_LEVELING_BILINEAR //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING @@ -1454,7 +1458,7 @@ #if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR) // Set the number of grid points per dimension. - #define GRID_MAX_POINTS_X 3 + #define GRID_MAX_POINTS_X 5 #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X // Probe along the Y axis, advancing X after each column @@ -1518,7 +1522,7 @@ * Add a bed leveling sub-menu for ABL or MBL. * Include a guided procedure if manual probing is enabled. */ -//#define LCD_BED_LEVELING +#define LCD_BED_LEVELING #if ENABLED(LCD_BED_LEVELING) #define MESH_EDIT_Z_STEP 0.025 // (mm) Step size while manually probing Z axis. @@ -1527,7 +1531,7 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS +#define LEVEL_BED_CORNERS #if ENABLED(LEVEL_BED_CORNERS) #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets @@ -1595,7 +1599,7 @@ #endif // Homing speeds (mm/min) -#define HOMING_FEEDRATE_MM_M { (50*60), (50*60), (4*60) } +#define HOMING_FEEDRATE_MM_M { (80*60), (80*60), (20*60) } // Validate that endstops are triggered on homing moves #define VALIDATE_HOMING_ENDSTOPS @@ -1672,7 +1676,7 @@ * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) */ -//#define EEPROM_SETTINGS // Persistent storage with M500 and M501 +#define EEPROM_SETTINGS // Persistent storage with M500 and M501 //#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. #define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load @@ -1706,14 +1710,14 @@ // Preheat Constants - Up to 5 are supported without changes // #define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 180 -#define PREHEAT_1_TEMP_BED 70 +#define PREHEAT_1_TEMP_HOTEND 190 +#define PREHEAT_1_TEMP_BED 60 #define PREHEAT_1_TEMP_CHAMBER 35 #define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 #define PREHEAT_2_LABEL "ABS" #define PREHEAT_2_TEMP_HOTEND 240 -#define PREHEAT_2_TEMP_BED 110 +#define PREHEAT_2_TEMP_BED 90 #define PREHEAT_2_TEMP_CHAMBER 35 #define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 @@ -1728,11 +1732,11 @@ * P1 Raise the nozzle always to Z-park height. * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. */ -//#define NOZZLE_PARK_FEATURE +#define NOZZLE_PARK_FEATURE #if ENABLED(NOZZLE_PARK_FEATURE) // Specify a park position as { X, Y, Z_raise } - #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 } + #define NOZZLE_PARK_POINT { 3, (Y_MAX_POS - 3), 10 } //#define NOZZLE_PARK_X_ONLY // X move only is required to park //#define NOZZLE_PARK_Y_ONLY // Y move only is required to park #define NOZZLE_PARK_Z_RAISE_MIN 2 // (mm) Always raise Z by at least this distance @@ -1936,7 +1940,7 @@ * SD Card support is disabled by default. If your controller has an SD slot, * you must uncomment the following option or it won't work. */ -//#define SDSUPPORT +#define SDSUPPORT /** * SD CARD: ENABLE CRC @@ -1960,7 +1964,7 @@ // This option overrides the default number of encoder pulses needed to // produce one step. Should be increased for high-resolution encoders. // -//#define ENCODER_PULSES_PER_STEP 4 +#define ENCODER_PULSES_PER_STEP 2 // // Use this option to override the number of step signals required to @@ -2014,7 +2018,7 @@ // If you have a speaker that can produce tones, enable it here. // By default Marlin assumes you have a buzzer with a fixed frequency. // -//#define SPEAKER +#define SPEAKER // // The duration and frequency for the UI feedback sound. @@ -2037,7 +2041,7 @@ // // Note: Usually sold with a white PCB. // -//#define REPRAP_DISCOUNT_SMART_CONTROLLER +#define REPRAP_DISCOUNT_SMART_CONTROLLER // // GT2560 (YHCB2004) LCD Display diff --git a/config/examples/Geeetech/A10M/YHCB2004_V4.1/Configuration.h b/config/examples/Geeetech/A10M/YHCB2004_V4.1/Configuration.h index 78c2dc9160..69961ce92e 100644 --- a/config/examples/Geeetech/A10M/YHCB2004_V4.1/Configuration.h +++ b/config/examples/Geeetech/A10M/YHCB2004_V4.1/Configuration.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Geeetech/A10M/YHCB2004_V4.1" + /** * Configuration.h * @@ -134,11 +136,11 @@ // Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_RAMPS_14_EFB + #define MOTHERBOARD BOARD_GT2560_V3 #endif // Name displayed in the LCD "Ready" message and Info menu -//#define CUSTOM_MACHINE_NAME "3D Printer" +#define CUSTOM_MACHINE_NAME "Geeetech A10M" // Printer's unique ID, used by some programs to differentiate between machines. // Choose your own or use a service like https://www.uuidgenerator.net/version4 @@ -292,14 +294,14 @@ * - This implementation supports up to two mixing extruders. * - Enable DIRECT_MIXING_IN_G1 for M165 and mixing in G1 (from Pia Taubert's reference implementation). */ -//#define MIXING_EXTRUDER +#define MIXING_EXTRUDER #if ENABLED(MIXING_EXTRUDER) #define MIXING_STEPPERS 2 // Number of steppers in your mixing extruder #define MIXING_VIRTUAL_TOOLS 16 // Use the Virtual Tool method with M163 and M164 //#define DIRECT_MIXING_IN_G1 // Allow ABCDHI mix factors in G1 movement commands - //#define GRADIENT_MIX // Support for gradient mixing with M166 and LCD + #define GRADIENT_MIX // Support for gradient mixing with M166 and LCD #if ENABLED(GRADIENT_MIX) - //#define GRADIENT_VTOOL // Add M166 T to use a V-tool index as a Gradient alias + #define GRADIENT_VTOOL // Add M166 T to use a V-tool index as a Gradient alias #endif #endif @@ -424,7 +426,7 @@ #define TEMP_SENSOR_5 0 #define TEMP_SENSOR_6 0 #define TEMP_SENSOR_7 0 -#define TEMP_SENSOR_BED 0 +#define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 #define TEMP_SENSOR_COOLER 0 @@ -506,20 +508,21 @@ #if ENABLED(PIDTEMP) //#define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) - //#define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) + #define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) // Set/get with gcode: M301 E[extruder number, 0-2] + // A10M [@thinkyhead] #if ENABLED(PID_PARAMS_PER_HOTEND) // Specify between 1 and HOTENDS values per array. // If fewer than EXTRUDER values are provided, the last element will be repeated. - #define DEFAULT_Kp_LIST { 22.20, 22.20 } - #define DEFAULT_Ki_LIST { 1.08, 1.08 } - #define DEFAULT_Kd_LIST { 114.00, 114.00 } + #define DEFAULT_Kp_LIST { 45.80, 45.80 } + #define DEFAULT_Ki_LIST { 3.61, 3.61 } + #define DEFAULT_Kd_LIST { 145.39, 145.39 } #else - #define DEFAULT_Kp 22.20 - #define DEFAULT_Ki 1.08 - #define DEFAULT_Kd 114.00 + #define DEFAULT_Kp 45.80 + #define DEFAULT_Ki 3.61 + #define DEFAULT_Kd 145.39 #endif #endif // PIDTEMP @@ -540,7 +543,7 @@ * heater. If your configuration is significantly different than this and you don't understand * the issues involved, don't use bed PID until someone else verifies that your hardware works. */ -//#define PIDTEMPBED +#define PIDTEMPBED //#define BED_LIMIT_SWITCHING @@ -556,11 +559,10 @@ //#define MIN_BED_POWER 0 //#define PID_BED_DEBUG // Sends debug data to the serial port. - // 120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - // from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) - #define DEFAULT_bedKp 10.00 - #define DEFAULT_bedKi .023 - #define DEFAULT_bedKd 305.4 + // MeCreator2 generated by Autotune + #define DEFAULT_bedKp 182.46 // 175.68 189.95 + #define DEFAULT_bedKi 35.92 // 34.59 37.40 + #define DEFAULT_bedKd 231.70 // 223.07 241.19 // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. #endif // PIDTEMPBED @@ -634,7 +636,7 @@ * Note: For Bowden Extruders make this large enough to allow load/unload. */ #define PREVENT_LENGTHY_EXTRUDE -#define EXTRUDE_MAXLENGTH 200 +#define EXTRUDE_MAXLENGTH 450 //=========================================================================== //======================== Thermal Runaway Protection ======================= @@ -717,13 +719,13 @@ #endif // Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define X_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_PROBE_ENDSTOP_INVERTING false // Set to true to invert the logic of the probe. +#define X_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Y_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Z_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define X_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Y_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Z_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Z_MIN_PROBE_ENDSTOP_INVERTING true // Set to true to invert the logic of the probe. /** * Stepper Drivers @@ -806,14 +808,14 @@ * Override with M92 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 500 } +#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 430 } /** * Default Max Feed Rate (mm/s) * Override with M203 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 } +#define DEFAULT_MAX_FEEDRATE { 500, 500, 5, 25 } //#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 #if ENABLED(LIMITED_MAX_FR_EDITING) @@ -826,7 +828,7 @@ * Override with M201 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 } +#define DEFAULT_MAX_ACCELERATION { 500, 500, 100, 5000 } //#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 #if ENABLED(LIMITED_MAX_ACCEL_EDITING) @@ -841,9 +843,9 @@ * M204 R Retract Acceleration * M204 T Travel Acceleration */ -#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves +#define DEFAULT_ACCELERATION 1000 // X, Y, Z and E acceleration for printing moves +#define DEFAULT_RETRACT_ACCELERATION 2000 // E acceleration for retracts +#define DEFAULT_TRAVEL_ACCELERATION 1000 // X, Y, Z acceleration for travel (non printing) moves /** * Default Jerk limits (mm/s) @@ -857,7 +859,7 @@ #if ENABLED(CLASSIC_JERK) #define DEFAULT_XJERK 10.0 #define DEFAULT_YJERK 10.0 - #define DEFAULT_ZJERK 0.3 + #define DEFAULT_ZJERK 0.4 //#define TRAVEL_EXTRA_XYJERK 0.0 // Additional jerk allowance for all travel moves @@ -877,7 +879,7 @@ * https://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html */ #if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.013 // (mm) Distance from real junction edge + #define JUNCTION_DEVIATION_MM 0.04 // (mm) Distance from real junction edge #define JD_HANDLE_SMALL_SEGMENTS // Use curvature estimation instead of just the junction angle // for small segments (< 1mm) with large junction angles (> 135°). #endif @@ -940,7 +942,7 @@ * Use G29 repeatedly, adjusting the Z height at each point with movement commands * or (with LCD_BED_LEVELING) the LCD controller. */ -//#define PROBE_MANUALLY +#define PROBE_MANUALLY /** * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. @@ -1055,7 +1057,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +#define NOZZLE_TO_PROBE_OFFSET { -37, 0, -3.6 } // Most probes should stay away from the edges of the bed, but // with NOZZLE_AS_PROBE this can be negative for a wider probing area. @@ -1065,7 +1067,7 @@ #define XY_PROBE_FEEDRATE (133*60) // Feedrate (mm/min) for the first approach when double-probing (MULTIPLE_PROBING == 2) -#define Z_PROBE_FEEDRATE_FAST (4*60) +#define Z_PROBE_FEEDRATE_FAST (20*60) // Feedrate (mm/min) for the "accurate" probe of each point #define Z_PROBE_FEEDRATE_SLOW (Z_PROBE_FEEDRATE_FAST / 2) @@ -1106,7 +1108,7 @@ * A total of 2 does fast/slow probes with a weighted average. * A total of 3 or more adds more slow probes, taking the average. */ -//#define MULTIPLE_PROBING 2 +#define MULTIPLE_PROBING 2 //#define EXTRA_PROBING 1 /** @@ -1123,16 +1125,16 @@ * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. */ -#define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow -#define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points -#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes -//#define Z_AFTER_PROBING 5 // Z position after probing is done +#define Z_CLEARANCE_DEPLOY_PROBE 5 // Z Clearance for Deploy/Stow +#define Z_CLEARANCE_BETWEEN_PROBES 3 // Z Clearance between probe points +#define Z_CLEARANCE_MULTI_PROBE 2 // Z Clearance between multiple probes +#define Z_AFTER_PROBING 3 // Z position after probing is done #define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping // For M851 give a range for adjusting the Z probe offset -#define Z_PROBE_OFFSET_RANGE_MIN -20 -#define Z_PROBE_OFFSET_RANGE_MAX 20 +#define Z_PROBE_OFFSET_RANGE_MIN -5 +#define Z_PROBE_OFFSET_RANGE_MAX 0 // Enable the M48 repeatability test to test probe accuracy //#define Z_MIN_PROBE_REPEATABILITY_TEST @@ -1150,14 +1152,14 @@ * These options are most useful for the BLTouch probe, but may also improve * readings with inductive probes and piezo sensors. */ -//#define PROBING_HEATERS_OFF // Turn heaters off when probing +#define PROBING_HEATERS_OFF // Turn heaters off when probing #if ENABLED(PROBING_HEATERS_OFF) - //#define WAIT_FOR_BED_HEATER // Wait for bed to heat back up between probes (to improve accuracy) + #define WAIT_FOR_BED_HEATER // Wait for bed to heat back up between probes (to improve accuracy) //#define WAIT_FOR_HOTEND // Wait for hotend to heat back up between probes (to improve accuracy & prevent cold extrude) #endif -//#define PROBING_FANS_OFF // Turn fans off when probing +#define PROBING_FANS_OFF // Turn fans off when probing //#define PROBING_STEPPERS_OFF // Turn steppers off (unless needed to hold position) when probing -//#define DELAY_BEFORE_PROBING 200 // (ms) To prevent vibrations from triggering piezo sensors +#define DELAY_BEFORE_PROBING 100 // (ms) To prevent vibrations from triggering piezo sensors // Require minimum nozzle and/or bed temperature for probing //#define PREHEAT_BEFORE_PROBING @@ -1190,7 +1192,7 @@ // @section machine // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR false +#define INVERT_X_DIR true #define INVERT_Y_DIR true #define INVERT_Z_DIR false @@ -1232,16 +1234,16 @@ // @section machine // The size of the printable area -#define X_BED_SIZE 200 -#define Y_BED_SIZE 200 +#define X_BED_SIZE 230 +#define Y_BED_SIZE 230 // Travel limits (mm) after homing, corresponding to endstop positions. -#define X_MIN_POS 0 -#define Y_MIN_POS 0 +#define X_MIN_POS -10 +#define Y_MIN_POS -5 #define Z_MIN_POS 0 #define X_MAX_POS X_BED_SIZE #define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 200 +#define Z_MAX_POS 260 /** * Software Endstops @@ -1285,12 +1287,14 @@ * RAMPS-based boards use SERVO3_PIN for the first runout sensor. * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. */ -//#define FILAMENT_RUNOUT_SENSOR +#define FILAMENT_RUNOUT_SENSOR #if ENABLED(FILAMENT_RUNOUT_SENSOR) #define FIL_RUNOUT_ENABLED_DEFAULT true // Enable the sensor on startup. Override with M412 followed by M500. - #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. + #define NUM_RUNOUT_SENSORS 2 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. + #define FIL_RUNOUT_PIN 66 + #define FIL_RUNOUT2_PIN 67 - #define FIL_RUNOUT_STATE LOW // Pin state indicating that filament is NOT present. + #define FIL_RUNOUT_STATE HIGH // Pin state indicating that filament is NOT present. #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. //#define WATCH_ALL_RUNOUT_SENSORS // Execute runout script on any triggering sensor, not only for the active extruder. @@ -1387,7 +1391,7 @@ */ //#define AUTO_BED_LEVELING_3POINT //#define AUTO_BED_LEVELING_LINEAR -//#define AUTO_BED_LEVELING_BILINEAR +#define AUTO_BED_LEVELING_BILINEAR //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING @@ -1454,7 +1458,7 @@ #if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR) // Set the number of grid points per dimension. - #define GRID_MAX_POINTS_X 3 + #define GRID_MAX_POINTS_X 5 #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X // Probe along the Y axis, advancing X after each column @@ -1518,7 +1522,7 @@ * Add a bed leveling sub-menu for ABL or MBL. * Include a guided procedure if manual probing is enabled. */ -//#define LCD_BED_LEVELING +#define LCD_BED_LEVELING #if ENABLED(LCD_BED_LEVELING) #define MESH_EDIT_Z_STEP 0.025 // (mm) Step size while manually probing Z axis. @@ -1527,7 +1531,7 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS +#define LEVEL_BED_CORNERS #if ENABLED(LEVEL_BED_CORNERS) #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets @@ -1595,7 +1599,7 @@ #endif // Homing speeds (mm/min) -#define HOMING_FEEDRATE_MM_M { (50*60), (50*60), (4*60) } +#define HOMING_FEEDRATE_MM_M { (80*60), (80*60), (20*60) } // Validate that endstops are triggered on homing moves #define VALIDATE_HOMING_ENDSTOPS @@ -1672,7 +1676,7 @@ * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) */ -//#define EEPROM_SETTINGS // Persistent storage with M500 and M501 +#define EEPROM_SETTINGS // Persistent storage with M500 and M501 //#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. #define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load @@ -1706,14 +1710,14 @@ // Preheat Constants - Up to 5 are supported without changes // #define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 180 -#define PREHEAT_1_TEMP_BED 70 +#define PREHEAT_1_TEMP_HOTEND 190 +#define PREHEAT_1_TEMP_BED 60 #define PREHEAT_1_TEMP_CHAMBER 35 #define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 #define PREHEAT_2_LABEL "ABS" #define PREHEAT_2_TEMP_HOTEND 240 -#define PREHEAT_2_TEMP_BED 110 +#define PREHEAT_2_TEMP_BED 90 #define PREHEAT_2_TEMP_CHAMBER 35 #define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 @@ -1728,11 +1732,11 @@ * P1 Raise the nozzle always to Z-park height. * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. */ -//#define NOZZLE_PARK_FEATURE +#define NOZZLE_PARK_FEATURE #if ENABLED(NOZZLE_PARK_FEATURE) // Specify a park position as { X, Y, Z_raise } - #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 } + #define NOZZLE_PARK_POINT { 3, (Y_MAX_POS - 3), 10 } //#define NOZZLE_PARK_X_ONLY // X move only is required to park //#define NOZZLE_PARK_Y_ONLY // Y move only is required to park #define NOZZLE_PARK_Z_RAISE_MIN 2 // (mm) Always raise Z by at least this distance @@ -1936,7 +1940,7 @@ * SD Card support is disabled by default. If your controller has an SD slot, * you must uncomment the following option or it won't work. */ -//#define SDSUPPORT +#define SDSUPPORT /** * SD CARD: ENABLE CRC @@ -1960,7 +1964,7 @@ // This option overrides the default number of encoder pulses needed to // produce one step. Should be increased for high-resolution encoders. // -//#define ENCODER_PULSES_PER_STEP 4 +#define ENCODER_PULSES_PER_STEP 2 // // Use this option to override the number of step signals required to @@ -2014,7 +2018,7 @@ // If you have a speaker that can produce tones, enable it here. // By default Marlin assumes you have a buzzer with a fixed frequency. // -//#define SPEAKER +#define SPEAKER // // The duration and frequency for the UI feedback sound. @@ -2045,7 +2049,7 @@ // Requires Testato, Koepel softwarewire library and // Andriy Golovnya's LiquidCrystal_AIP31068 library. // -//#define YHCB2004 +#define YHCB2004 // // Original RADDS LCD Display+Encoder+SDCardReader diff --git a/config/examples/Geeetech/A10PRO/Configuration.h b/config/examples/Geeetech/A10PRO/Configuration.h index 78c2dc9160..6f649aef13 100644 --- a/config/examples/Geeetech/A10PRO/Configuration.h +++ b/config/examples/Geeetech/A10PRO/Configuration.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Geeetech/A10PRO" + /** * Configuration.h * @@ -69,7 +71,7 @@ // @section info // Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes. +#define STRING_CONFIG_H_AUTHOR "(Phr3d13, Geeetech A10 default)" // Who made the changes. //#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) /** @@ -134,11 +136,11 @@ // Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_RAMPS_14_EFB + #define MOTHERBOARD BOARD_GT2560_V3 #endif // Name displayed in the LCD "Ready" message and Info menu -//#define CUSTOM_MACHINE_NAME "3D Printer" +#define CUSTOM_MACHINE_NAME "Geeetech A10" // Printer's unique ID, used by some programs to differentiate between machines. // Choose your own or use a service like https://www.uuidgenerator.net/version4 @@ -297,9 +299,9 @@ #define MIXING_STEPPERS 2 // Number of steppers in your mixing extruder #define MIXING_VIRTUAL_TOOLS 16 // Use the Virtual Tool method with M163 and M164 //#define DIRECT_MIXING_IN_G1 // Allow ABCDHI mix factors in G1 movement commands - //#define GRADIENT_MIX // Support for gradient mixing with M166 and LCD + #define GRADIENT_MIX // Support for gradient mixing with M166 and LCD #if ENABLED(GRADIENT_MIX) - //#define GRADIENT_VTOOL // Add M166 T to use a V-tool index as a Gradient alias + #define GRADIENT_VTOOL // Add M166 T to use a V-tool index as a Gradient alias #endif #endif @@ -424,7 +426,7 @@ #define TEMP_SENSOR_5 0 #define TEMP_SENSOR_6 0 #define TEMP_SENSOR_7 0 -#define TEMP_SENSOR_BED 0 +#define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 #define TEMP_SENSOR_COOLER 0 @@ -505,21 +507,22 @@ #define PID_K1 0.95 // Smoothing factor within any PID loop #if ENABLED(PIDTEMP) - //#define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) - //#define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) + #define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) + #define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) // Set/get with gcode: M301 E[extruder number, 0-2] + // A10M [@thinkyhead] #if ENABLED(PID_PARAMS_PER_HOTEND) // Specify between 1 and HOTENDS values per array. // If fewer than EXTRUDER values are provided, the last element will be repeated. - #define DEFAULT_Kp_LIST { 22.20, 22.20 } - #define DEFAULT_Ki_LIST { 1.08, 1.08 } - #define DEFAULT_Kd_LIST { 114.00, 114.00 } + #define DEFAULT_Kp_LIST { 45.80, 45.80 } + #define DEFAULT_Ki_LIST { 3.61, 3.61 } + #define DEFAULT_Kd_LIST { 145.39, 145.39 } #else - #define DEFAULT_Kp 22.20 - #define DEFAULT_Ki 1.08 - #define DEFAULT_Kd 114.00 + #define DEFAULT_Kp 45.80 + #define DEFAULT_Ki 3.61 + #define DEFAULT_Kd 145.39 #endif #endif // PIDTEMP @@ -540,7 +543,7 @@ * heater. If your configuration is significantly different than this and you don't understand * the issues involved, don't use bed PID until someone else verifies that your hardware works. */ -//#define PIDTEMPBED +#define PIDTEMPBED //#define BED_LIMIT_SWITCHING @@ -556,11 +559,10 @@ //#define MIN_BED_POWER 0 //#define PID_BED_DEBUG // Sends debug data to the serial port. - // 120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - // from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) - #define DEFAULT_bedKp 10.00 - #define DEFAULT_bedKi .023 - #define DEFAULT_bedKd 305.4 + // MeCreator2 generated by Autotune + #define DEFAULT_bedKp 182.46 // 175.68 189.95 + #define DEFAULT_bedKi 35.92 // 34.59 37.40 + #define DEFAULT_bedKd 231.70 // 223.07 241.19 // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. #endif // PIDTEMPBED @@ -634,7 +636,7 @@ * Note: For Bowden Extruders make this large enough to allow load/unload. */ #define PREVENT_LENGTHY_EXTRUDE -#define EXTRUDE_MAXLENGTH 200 +#define EXTRUDE_MAXLENGTH 450 //=========================================================================== //======================== Thermal Runaway Protection ======================= @@ -717,13 +719,13 @@ #endif // Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define X_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_PROBE_ENDSTOP_INVERTING false // Set to true to invert the logic of the probe. +#define X_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Y_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Z_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define X_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Y_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Z_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Z_MIN_PROBE_ENDSTOP_INVERTING true // Set to true to invert the logic of the probe. /** * Stepper Drivers @@ -806,14 +808,14 @@ * Override with M92 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 500 } +#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 93 } /** * Default Max Feed Rate (mm/s) * Override with M203 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 } +#define DEFAULT_MAX_FEEDRATE { 500, 500, 5, 25 } //#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 #if ENABLED(LIMITED_MAX_FR_EDITING) @@ -826,7 +828,7 @@ * Override with M201 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 } +#define DEFAULT_MAX_ACCELERATION { 500, 500, 100, 5000 } //#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 #if ENABLED(LIMITED_MAX_ACCEL_EDITING) @@ -841,9 +843,9 @@ * M204 R Retract Acceleration * M204 T Travel Acceleration */ -#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves +#define DEFAULT_ACCELERATION 1000 // X, Y, Z and E acceleration for printing moves +#define DEFAULT_RETRACT_ACCELERATION 2000 // E acceleration for retracts +#define DEFAULT_TRAVEL_ACCELERATION 1000 // X, Y, Z acceleration for travel (non printing) moves /** * Default Jerk limits (mm/s) @@ -857,7 +859,7 @@ #if ENABLED(CLASSIC_JERK) #define DEFAULT_XJERK 10.0 #define DEFAULT_YJERK 10.0 - #define DEFAULT_ZJERK 0.3 + #define DEFAULT_ZJERK 0.4 //#define TRAVEL_EXTRA_XYJERK 0.0 // Additional jerk allowance for all travel moves @@ -877,7 +879,7 @@ * https://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html */ #if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.013 // (mm) Distance from real junction edge + #define JUNCTION_DEVIATION_MM 0.04 // (mm) Distance from real junction edge #define JD_HANDLE_SMALL_SEGMENTS // Use curvature estimation instead of just the junction angle // for small segments (< 1mm) with large junction angles (> 135°). #endif @@ -940,7 +942,7 @@ * Use G29 repeatedly, adjusting the Z height at each point with movement commands * or (with LCD_BED_LEVELING) the LCD controller. */ -//#define PROBE_MANUALLY +#define PROBE_MANUALLY /** * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. @@ -1055,7 +1057,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +#define NOZZLE_TO_PROBE_OFFSET { -37, 0, -3.6 } // Most probes should stay away from the edges of the bed, but // with NOZZLE_AS_PROBE this can be negative for a wider probing area. @@ -1065,7 +1067,7 @@ #define XY_PROBE_FEEDRATE (133*60) // Feedrate (mm/min) for the first approach when double-probing (MULTIPLE_PROBING == 2) -#define Z_PROBE_FEEDRATE_FAST (4*60) +#define Z_PROBE_FEEDRATE_FAST (20*60) // Feedrate (mm/min) for the "accurate" probe of each point #define Z_PROBE_FEEDRATE_SLOW (Z_PROBE_FEEDRATE_FAST / 2) @@ -1106,7 +1108,7 @@ * A total of 2 does fast/slow probes with a weighted average. * A total of 3 or more adds more slow probes, taking the average. */ -//#define MULTIPLE_PROBING 2 +#define MULTIPLE_PROBING 2 //#define EXTRA_PROBING 1 /** @@ -1123,16 +1125,16 @@ * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. */ -#define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow -#define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points -#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes -//#define Z_AFTER_PROBING 5 // Z position after probing is done +#define Z_CLEARANCE_DEPLOY_PROBE 5 // Z Clearance for Deploy/Stow +#define Z_CLEARANCE_BETWEEN_PROBES 3 // Z Clearance between probe points +#define Z_CLEARANCE_MULTI_PROBE 2 // Z Clearance between multiple probes +#define Z_AFTER_PROBING 3 // Z position after probing is done #define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping // For M851 give a range for adjusting the Z probe offset -#define Z_PROBE_OFFSET_RANGE_MIN -20 -#define Z_PROBE_OFFSET_RANGE_MAX 20 +#define Z_PROBE_OFFSET_RANGE_MIN -5 +#define Z_PROBE_OFFSET_RANGE_MAX 0 // Enable the M48 repeatability test to test probe accuracy //#define Z_MIN_PROBE_REPEATABILITY_TEST @@ -1150,14 +1152,14 @@ * These options are most useful for the BLTouch probe, but may also improve * readings with inductive probes and piezo sensors. */ -//#define PROBING_HEATERS_OFF // Turn heaters off when probing +#define PROBING_HEATERS_OFF // Turn heaters off when probing #if ENABLED(PROBING_HEATERS_OFF) - //#define WAIT_FOR_BED_HEATER // Wait for bed to heat back up between probes (to improve accuracy) + #define WAIT_FOR_BED_HEATER // Wait for bed to heat back up between probes (to improve accuracy) //#define WAIT_FOR_HOTEND // Wait for hotend to heat back up between probes (to improve accuracy & prevent cold extrude) #endif -//#define PROBING_FANS_OFF // Turn fans off when probing +#define PROBING_FANS_OFF // Turn fans off when probing //#define PROBING_STEPPERS_OFF // Turn steppers off (unless needed to hold position) when probing -//#define DELAY_BEFORE_PROBING 200 // (ms) To prevent vibrations from triggering piezo sensors +#define DELAY_BEFORE_PROBING 100 // (ms) To prevent vibrations from triggering piezo sensors // Require minimum nozzle and/or bed temperature for probing //#define PREHEAT_BEFORE_PROBING @@ -1190,21 +1192,19 @@ // @section machine // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR false +#define INVERT_X_DIR true #define INVERT_Y_DIR true #define INVERT_Z_DIR false // @section extruder // For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR false -#define INVERT_E1_DIR false -#define INVERT_E2_DIR false -#define INVERT_E3_DIR false -#define INVERT_E4_DIR false -#define INVERT_E5_DIR false -#define INVERT_E6_DIR false -#define INVERT_E7_DIR false +#define INVERT_E0_DIR true +#define INVERT_E1_DIR false // unused, the A10 only has one extruder by default +#define INVERT_E2_DIR false // unused, the A10 only has one extruder by default +#define INVERT_E3_DIR false // unused, the A10 only has one extruder by default +#define INVERT_E4_DIR false // unused, the A10 only has one extruder by default +#define INVERT_E5_DIR false // unused, the A10 only has one extruder by default // @section homing @@ -1232,16 +1232,16 @@ // @section machine // The size of the printable area -#define X_BED_SIZE 200 -#define Y_BED_SIZE 200 +#define X_BED_SIZE 230 +#define Y_BED_SIZE 230 // Travel limits (mm) after homing, corresponding to endstop positions. -#define X_MIN_POS 0 -#define Y_MIN_POS 0 +#define X_MIN_POS -11 +#define Y_MIN_POS -4 #define Z_MIN_POS 0 #define X_MAX_POS X_BED_SIZE #define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 200 +#define Z_MAX_POS 260 /** * Software Endstops @@ -1285,12 +1285,14 @@ * RAMPS-based boards use SERVO3_PIN for the first runout sensor. * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. */ -//#define FILAMENT_RUNOUT_SENSOR +#define FILAMENT_RUNOUT_SENSOR #if ENABLED(FILAMENT_RUNOUT_SENSOR) #define FIL_RUNOUT_ENABLED_DEFAULT true // Enable the sensor on startup. Override with M412 followed by M500. #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. + #define FIL_RUNOUT_PIN 66 + //#define FIL_RUNOUT2_PIN 67 - #define FIL_RUNOUT_STATE LOW // Pin state indicating that filament is NOT present. + #define FIL_RUNOUT_STATE HIGH // Pin state indicating that filament is NOT present. #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. //#define WATCH_ALL_RUNOUT_SENSORS // Execute runout script on any triggering sensor, not only for the active extruder. @@ -1387,7 +1389,7 @@ */ //#define AUTO_BED_LEVELING_3POINT //#define AUTO_BED_LEVELING_LINEAR -//#define AUTO_BED_LEVELING_BILINEAR +#define AUTO_BED_LEVELING_BILINEAR //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING @@ -1454,7 +1456,7 @@ #if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR) // Set the number of grid points per dimension. - #define GRID_MAX_POINTS_X 3 + #define GRID_MAX_POINTS_X 5 #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X // Probe along the Y axis, advancing X after each column @@ -1518,7 +1520,7 @@ * Add a bed leveling sub-menu for ABL or MBL. * Include a guided procedure if manual probing is enabled. */ -//#define LCD_BED_LEVELING +#define LCD_BED_LEVELING #if ENABLED(LCD_BED_LEVELING) #define MESH_EDIT_Z_STEP 0.025 // (mm) Step size while manually probing Z axis. @@ -1527,7 +1529,7 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS +#define LEVEL_BED_CORNERS #if ENABLED(LEVEL_BED_CORNERS) #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets @@ -1595,7 +1597,7 @@ #endif // Homing speeds (mm/min) -#define HOMING_FEEDRATE_MM_M { (50*60), (50*60), (4*60) } +#define HOMING_FEEDRATE_MM_M { (80*60), (80*60), (20*60) } // Validate that endstops are triggered on homing moves #define VALIDATE_HOMING_ENDSTOPS @@ -1672,12 +1674,12 @@ * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) */ -//#define EEPROM_SETTINGS // Persistent storage with M500 and M501 +#define EEPROM_SETTINGS // Persistent storage with M500 and M501 //#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. #define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load #if ENABLED(EEPROM_SETTINGS) - //#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. + #define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. #endif // @@ -1706,14 +1708,14 @@ // Preheat Constants - Up to 5 are supported without changes // #define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 180 -#define PREHEAT_1_TEMP_BED 70 +#define PREHEAT_1_TEMP_HOTEND 190 +#define PREHEAT_1_TEMP_BED 60 #define PREHEAT_1_TEMP_CHAMBER 35 #define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 #define PREHEAT_2_LABEL "ABS" #define PREHEAT_2_TEMP_HOTEND 240 -#define PREHEAT_2_TEMP_BED 110 +#define PREHEAT_2_TEMP_BED 90 #define PREHEAT_2_TEMP_CHAMBER 35 #define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 @@ -1728,11 +1730,11 @@ * P1 Raise the nozzle always to Z-park height. * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. */ -//#define NOZZLE_PARK_FEATURE +#define NOZZLE_PARK_FEATURE #if ENABLED(NOZZLE_PARK_FEATURE) // Specify a park position as { X, Y, Z_raise } - #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 } + #define NOZZLE_PARK_POINT { 3, (Y_MAX_POS - 3), 10 } //#define NOZZLE_PARK_X_ONLY // X move only is required to park //#define NOZZLE_PARK_Y_ONLY // Y move only is required to park #define NOZZLE_PARK_Z_RAISE_MIN 2 // (mm) Always raise Z by at least this distance @@ -1845,7 +1847,7 @@ * * View the current statistics with M78. */ -//#define PRINTCOUNTER +#define PRINTCOUNTER #if ENABLED(PRINTCOUNTER) #define PRINTCOUNTER_SAVE_INTERVAL 60 // (minutes) EEPROM save interval during print #endif @@ -1936,7 +1938,7 @@ * SD Card support is disabled by default. If your controller has an SD slot, * you must uncomment the following option or it won't work. */ -//#define SDSUPPORT +#define SDSUPPORT /** * SD CARD: ENABLE CRC @@ -1960,7 +1962,7 @@ // This option overrides the default number of encoder pulses needed to // produce one step. Should be increased for high-resolution encoders. // -//#define ENCODER_PULSES_PER_STEP 4 +#define ENCODER_PULSES_PER_STEP 2 // // Use this option to override the number of step signals required to @@ -2014,7 +2016,7 @@ // If you have a speaker that can produce tones, enable it here. // By default Marlin assumes you have a buzzer with a fixed frequency. // -//#define SPEAKER +#define SPEAKER // // The duration and frequency for the UI feedback sound. @@ -2045,7 +2047,7 @@ // Requires Testato, Koepel softwarewire library and // Andriy Golovnya's LiquidCrystal_AIP31068 library. // -//#define YHCB2004 +#define YHCB2004 // // Original RADDS LCD Display+Encoder+SDCardReader diff --git a/config/examples/Geeetech/A10PRO/Configuration_adv.h b/config/examples/Geeetech/A10PRO/Configuration_adv.h index 5335fa012a..d3c75ed8c5 100644 --- a/config/examples/Geeetech/A10PRO/Configuration_adv.h +++ b/config/examples/Geeetech/A10PRO/Configuration_adv.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Geeetech/A10PRO" + /** * Configuration_adv.h * @@ -867,7 +869,7 @@ // On a 300mm bed a 5% grade would give a misalignment of ~1.5cm #define G34_MAX_GRADE 5 // (%) Maximum incline that G34 will handle - #define Z_STEPPER_ALIGN_ITERATIONS 5 // Number of iterations to apply during alignment + #define Z_STEPPER_ALIGN_ITERATIONS 3 // Number of iterations to apply during alignment #define Z_STEPPER_ALIGN_ACC 0.02 // Stop iterating early if the accuracy is better than this #define RESTORE_LEVELING_AFTER_G34 // Restore leveling after G34 is done? // After G34, re-home Z (G28 Z) or just calculate it from the last probe heights? @@ -1175,7 +1177,7 @@ #endif // Include a page of printer information in the LCD Main Menu - //#define LCD_INFO_MENU + #define LCD_INFO_MENU #if ENABLED(LCD_INFO_MENU) //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages #endif @@ -1229,7 +1231,7 @@ #endif // Scroll a longer status message into view - //#define STATUS_MESSAGE_SCROLLING + #define STATUS_MESSAGE_SCROLLING // On the Info Screen, display XY with one decimal place when possible //#define LCD_DECIMAL_SMALL_XY @@ -1301,7 +1303,7 @@ //#define BROWSE_MEDIA_ON_INSERT // Open the file browser when media is inserted - #define EVENT_GCODE_SD_ABORT "G28XY" // G-code to run on SD Abort Print (e.g., "G28XY" or "G27") + #define EVENT_GCODE_SD_ABORT "G27" // G-code to run on SD Abort Print (e.g., "G28XY" or "G27") #if ENABLED(PRINTER_EVENT_LEDS) #define PE_LEDS_COMPLETED_TIME (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination @@ -1381,10 +1383,10 @@ //#define UTF_FILENAME_SUPPORT // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT + #define LONG_FILENAME_HOST_SUPPORT // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES + #define SCROLL_LONG_FILENAMES // Leave the heaters on after Stop Print (not recommended!) //#define SD_ABORT_NO_COOLDOWN @@ -1790,7 +1792,7 @@ * * Warning: Does not respect endstops! */ -//#define BABYSTEPPING +#define BABYSTEPPING #if ENABLED(BABYSTEPPING) //#define INTEGRATED_BABYSTEPPING // EXPERIMENTAL integration of babystepping into the Stepper ISR //#define BABYSTEP_WITHOUT_HOMING @@ -1837,7 +1839,7 @@ * * See https://marlinfw.org/docs/features/lin_advance.html for full instructions. */ -//#define LIN_ADVANCE +#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) //#define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed @@ -2311,7 +2313,7 @@ * * Enable PARK_HEAD_ON_PAUSE to add the G-code M125 Pause and Park. */ -//#define ADVANCED_PAUSE_FEATURE +#define ADVANCED_PAUSE_FEATURE #if ENABLED(ADVANCED_PAUSE_FEATURE) #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. @@ -2349,7 +2351,7 @@ #define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed. #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change. - //#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. + #define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. //#define HOME_BEFORE_FILAMENT_CHANGE // If needed, home before parking for filament change //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. diff --git a/config/examples/Geeetech/A10T/Configuration_adv.h b/config/examples/Geeetech/A10T/Configuration_adv.h index 5335fa012a..07c294c7e5 100644 --- a/config/examples/Geeetech/A10T/Configuration_adv.h +++ b/config/examples/Geeetech/A10T/Configuration_adv.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Geeetech/A10T" + /** * Configuration_adv.h * @@ -741,7 +743,7 @@ //#define HOMING_BACKOFF_POST_MM { 2, 2, 2 } // (mm) Backoff from endstops after homing -//#define QUICK_HOME // If G28 contains XY do a diagonal move first +#define QUICK_HOME // If G28 contains XY do a diagonal move first //#define HOME_Y_BEFORE_X // If G28 contains XY home Y before X //#define HOME_Z_FIRST // Home Z first. Requires a Z-MIN endstop (not a probe). //#define CODEPENDENT_XY_HOMING // If X/Y can't home without homing Y/X first @@ -766,7 +768,7 @@ // Safety: The probe needs time to recognize the command. // Minimum command delay (ms). Enable and increase if needed. - //#define BLTOUCH_DELAY 500 + #define BLTOUCH_DELAY 200 /** * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones: @@ -808,7 +810,7 @@ * This feature was designed for Deltabots with very fast Z moves; however, higher speed Cartesians * might be able to use it. If the machine can't raise Z fast enough the BLTouch may go into ALARM. */ - //#define BLTOUCH_HS_MODE + #define BLTOUCH_HS_MODE // Safety: Enable voltage mode settings in the LCD menu. //#define BLTOUCH_LCD_VOLTAGE_MENU @@ -867,7 +869,7 @@ // On a 300mm bed a 5% grade would give a misalignment of ~1.5cm #define G34_MAX_GRADE 5 // (%) Maximum incline that G34 will handle - #define Z_STEPPER_ALIGN_ITERATIONS 5 // Number of iterations to apply during alignment + #define Z_STEPPER_ALIGN_ITERATIONS 3 // Number of iterations to apply during alignment #define Z_STEPPER_ALIGN_ACC 0.02 // Stop iterating early if the accuracy is better than this #define RESTORE_LEVELING_AFTER_G34 // Restore leveling after G34 is done? // After G34, re-home Z (G28 Z) or just calculate it from the last probe heights? @@ -1145,8 +1147,8 @@ // Change values more rapidly when the encoder is rotated faster #define ENCODER_RATE_MULTIPLIER #if ENABLED(ENCODER_RATE_MULTIPLIER) - #define ENCODER_10X_STEPS_PER_SEC 30 // (steps/s) Encoder rate for 10x speed - #define ENCODER_100X_STEPS_PER_SEC 80 // (steps/s) Encoder rate for 100x speed + #define ENCODER_10X_STEPS_PER_SEC 10 // (steps/s) Encoder rate for 10x speed + #define ENCODER_100X_STEPS_PER_SEC 50 // (steps/s) Encoder rate for 100x speed #endif // Play a beep when the feedrate is changed from the Status Screen @@ -1175,7 +1177,7 @@ #endif // Include a page of printer information in the LCD Main Menu - //#define LCD_INFO_MENU + #define LCD_INFO_MENU #if ENABLED(LCD_INFO_MENU) //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages #endif @@ -1229,7 +1231,7 @@ #endif // Scroll a longer status message into view - //#define STATUS_MESSAGE_SCROLLING + #define STATUS_MESSAGE_SCROLLING // On the Info Screen, display XY with one decimal place when possible //#define LCD_DECIMAL_SMALL_XY @@ -1253,11 +1255,11 @@ #endif #if EITHER(HAS_MARLINUI_HD44780, IS_TFTGLCD_PANEL) - //#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing + #define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing #if ENABLED(LCD_PROGRESS_BAR) #define PROGRESS_BAR_BAR_TIME 2000 // (ms) Amount of time to show the bar - #define PROGRESS_BAR_MSG_TIME 3000 // (ms) Amount of time to show the status message - #define PROGRESS_MSG_EXPIRE 0 // (ms) Amount of time to retain the status message (0=forever) + #define PROGRESS_BAR_MSG_TIME 3500 // (ms) Amount of time to show the status message + #define PROGRESS_MSG_EXPIRE 180000 // (ms) Amount of time to retain the status message (0=forever) //#define PROGRESS_MSG_ONCE // Show the message for MSG_TIME then clear it //#define LCD_PROGRESS_BAR_TEST // Add a menu item to test the progress bar #endif @@ -1301,7 +1303,7 @@ //#define BROWSE_MEDIA_ON_INSERT // Open the file browser when media is inserted - #define EVENT_GCODE_SD_ABORT "G28XY" // G-code to run on SD Abort Print (e.g., "G28XY" or "G27") + #define EVENT_GCODE_SD_ABORT "G27" // G-code to run on SD Abort Print (e.g., "G28XY" or "G27") #if ENABLED(PRINTER_EVENT_LEDS) #define PE_LEDS_COMPLETED_TIME (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination @@ -1315,13 +1317,13 @@ * an option on the LCD screen to continue the print from the last-known * point in the file. */ - //#define POWER_LOSS_RECOVERY + #define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) //#define BACKUP_POWER_SUPPLY // Backup power / UPS to move the steppers on power loss //#define POWER_LOSS_ZRAISE 2 // (mm) Z axis raise on resume (on power loss with UPS) - //#define POWER_LOSS_PIN 44 // Pin to detect power loss. Set to -1 to disable default pin on boards without module. - //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss + #define POWER_LOSS_PIN 69 // Pin to detect power loss. Set to -1 to disable default pin on boards without module. + #define POWER_LOSS_STATE LOW // State of pin indicating power loss //#define POWER_LOSS_PULLUP // Set pullup / pulldown as appropriate for your sensor //#define POWER_LOSS_PULLDOWN //#define POWER_LOSS_PURGE_LEN 20 // (mm) Length of filament to purge on resume @@ -1361,15 +1363,15 @@ * - SDSORT_CACHE_NAMES will retain the sorted file listing in RAM. (Expensive!) * - SDSORT_DYNAMIC_RAM only uses RAM when the SD menu is visible. (Use with caution!) */ - //#define SDCARD_SORT_ALPHA + #define SDCARD_SORT_ALPHA // SD Card Sorting options #if ENABLED(SDCARD_SORT_ALPHA) #define SDSORT_LIMIT 40 // Maximum number of sorted items (10-256). Costs 27 bytes each. #define FOLDER_SORTING -1 // -1=above 0=none 1=below #define SDSORT_GCODE false // Allow turning sorting on/off with LCD and M34 G-code. - #define SDSORT_USES_RAM false // Pre-allocate a static array for faster pre-sorting. - #define SDSORT_USES_STACK false // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.) + #define SDSORT_USES_RAM true // Pre-allocate a static array for faster pre-sorting. + #define SDSORT_USES_STACK true // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.) #define SDSORT_CACHE_NAMES false // Keep sorted items in RAM longer for speedy performance. Most expensive option. #define SDSORT_DYNAMIC_RAM false // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use! #define SDSORT_CACHE_VFATS 2 // Maximum number of 13-byte VFAT entries to use for sorting. @@ -1512,14 +1514,14 @@ */ #if HAS_MARLINUI_U8GLIB // Show SD percentage next to the progress bar - //#define DOGM_SD_PERCENT + #define DOGM_SD_PERCENT // Save many cycles by drawing a hollow frame or no frame on the Info Screen //#define XYZ_NO_FRAME #define XYZ_HOLLOW_FRAME // Enable to save many cycles by drawing a hollow frame on Menu Screens - #define MENU_HOLLOW_FRAME + //#define MENU_HOLLOW_FRAME // A bigger font is available for edit items. Costs 3120 bytes of PROGMEM. // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. @@ -1569,10 +1571,10 @@ //#define STATUS_CUTTER_ANIM // Use a second bitmap to indicate spindle / laser active //#define STATUS_COOLER_ANIM // Use a second bitmap to indicate laser cooling //#define STATUS_FLOWMETER_ANIM // Use multiple bitmaps to indicate coolant flow - //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap - //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap - //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames - //#define STATUS_HEAT_PERCENT // Show heating in a progress bar + #define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap + #define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap + #define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames + #define STATUS_HEAT_PERCENT // Show heating in a progress bar //#define BOOT_MARLIN_LOGO_ANIMATED // Animated Marlin logo. Costs ~‭3260 (or ~940) bytes of PROGMEM. // Frivolous Game Options @@ -1790,7 +1792,7 @@ * * Warning: Does not respect endstops! */ -//#define BABYSTEPPING +#define BABYSTEPPING #if ENABLED(BABYSTEPPING) //#define INTEGRATED_BABYSTEPPING // EXPERIMENTAL integration of babystepping into the Stepper ISR //#define BABYSTEP_WITHOUT_HOMING @@ -1801,13 +1803,13 @@ #define BABYSTEP_MULTIPLICATOR_Z 1 // (steps or mm) Steps or millimeter distance for each Z babystep #define BABYSTEP_MULTIPLICATOR_XY 1 // (steps or mm) Steps or millimeter distance for each XY babystep - //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. + #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on doubleclick when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) - #define MOVE_Z_IDLE_MULTIPLICATOR 1 // Multiply 1mm by this factor for the move step size. + #define MOVE_Z_IDLE_MULTIPLICATOR 5 // Multiply 1mm by this factor for the move step size. #endif #endif @@ -2311,19 +2313,19 @@ * * Enable PARK_HEAD_ON_PAUSE to add the G-code M125 Pause and Park. */ -//#define ADVANCED_PAUSE_FEATURE +#define ADVANCED_PAUSE_FEATURE #if ENABLED(ADVANCED_PAUSE_FEATURE) #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. // This short retract is done immediately, before parking the nozzle. - #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast. + #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 18 // (mm/s) Unload filament feedrate. This can be pretty fast. #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload. + #define FILAMENT_CHANGE_UNLOAD_LENGTH 450 // (mm) The length of filament for a complete unload. // For Bowden, the full length of the tube and nozzle. // For direct drive, the full length of the nozzle. // Set to 0 for manual unloading. - #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE 6 // (mm/s) Slow move when starting load. - #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 0 // (mm) Slow length, to allow time to insert material. + #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE 12 // (mm/s) Slow move when starting load. + #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 450 // (mm) Slow length, to allow time to insert material. // 0 to disable start loading and skip to fast load only #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast. #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. @@ -2332,7 +2334,7 @@ // For direct drive, the full length of the nozzle. //#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted. #define ADVANCED_PAUSE_PURGE_FEEDRATE 3 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate. - #define ADVANCED_PAUSE_PURGE_LENGTH 50 // (mm) Length to extrude after loading. + #define ADVANCED_PAUSE_PURGE_LENGTH 40 // (mm) Length to extrude after loading. // Set to 0 for manual extrusion. // Filament can be extruded repeatedly from the Filament Change menu // until extrusion is consistent, and to purge old filament. @@ -3471,7 +3473,7 @@ * - M206 and M428 are disabled. * - G92 will revert to its behavior from Marlin 1.0. */ -//#define NO_WORKSPACE_OFFSETS +#define NO_WORKSPACE_OFFSETS // Extra options for the M114 "Current Position" report //#define M114_DETAIL // Use 'M114` for details to check planner calculations diff --git a/config/examples/Geeetech/A10T/Stock LCD/Configuration.h b/config/examples/Geeetech/A10T/Stock LCD/Configuration.h index 78c2dc9160..148b2a2892 100644 --- a/config/examples/Geeetech/A10T/Stock LCD/Configuration.h +++ b/config/examples/Geeetech/A10T/Stock LCD/Configuration.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Geeetech/A10T/Stock LCD" + /** * Configuration.h * @@ -134,11 +136,11 @@ // Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_RAMPS_14_EFB + #define MOTHERBOARD BOARD_GT2560_V3 #endif // Name displayed in the LCD "Ready" message and Info menu -//#define CUSTOM_MACHINE_NAME "3D Printer" +#define CUSTOM_MACHINE_NAME "Geeetech A10T" // Printer's unique ID, used by some programs to differentiate between machines. // Choose your own or use a service like https://www.uuidgenerator.net/version4 @@ -292,14 +294,14 @@ * - This implementation supports up to two mixing extruders. * - Enable DIRECT_MIXING_IN_G1 for M165 and mixing in G1 (from Pia Taubert's reference implementation). */ -//#define MIXING_EXTRUDER +#define MIXING_EXTRUDER #if ENABLED(MIXING_EXTRUDER) - #define MIXING_STEPPERS 2 // Number of steppers in your mixing extruder + #define MIXING_STEPPERS 3 // Number of steppers in your mixing extruder #define MIXING_VIRTUAL_TOOLS 16 // Use the Virtual Tool method with M163 and M164 //#define DIRECT_MIXING_IN_G1 // Allow ABCDHI mix factors in G1 movement commands - //#define GRADIENT_MIX // Support for gradient mixing with M166 and LCD + #define GRADIENT_MIX // Support for gradient mixing with M166 and LCD #if ENABLED(GRADIENT_MIX) - //#define GRADIENT_VTOOL // Add M166 T to use a V-tool index as a Gradient alias + #define GRADIENT_VTOOL // Add M166 T to use a V-tool index as a Gradient alias #endif #endif @@ -424,7 +426,7 @@ #define TEMP_SENSOR_5 0 #define TEMP_SENSOR_6 0 #define TEMP_SENSOR_7 0 -#define TEMP_SENSOR_BED 0 +#define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 #define TEMP_SENSOR_COOLER 0 @@ -506,20 +508,21 @@ #if ENABLED(PIDTEMP) //#define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) - //#define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) + #define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) // Set/get with gcode: M301 E[extruder number, 0-2] + // A10M [@thinkyhead] #if ENABLED(PID_PARAMS_PER_HOTEND) // Specify between 1 and HOTENDS values per array. // If fewer than EXTRUDER values are provided, the last element will be repeated. - #define DEFAULT_Kp_LIST { 22.20, 22.20 } - #define DEFAULT_Ki_LIST { 1.08, 1.08 } - #define DEFAULT_Kd_LIST { 114.00, 114.00 } + #define DEFAULT_Kp_LIST { 45.80, 45.80 } + #define DEFAULT_Ki_LIST { 3.61, 3.61 } + #define DEFAULT_Kd_LIST { 145.39, 145.39 } #else - #define DEFAULT_Kp 22.20 - #define DEFAULT_Ki 1.08 - #define DEFAULT_Kd 114.00 + #define DEFAULT_Kp 45.80 + #define DEFAULT_Ki 3.61 + #define DEFAULT_Kd 145.39 #endif #endif // PIDTEMP @@ -540,7 +543,7 @@ * heater. If your configuration is significantly different than this and you don't understand * the issues involved, don't use bed PID until someone else verifies that your hardware works. */ -//#define PIDTEMPBED +#define PIDTEMPBED //#define BED_LIMIT_SWITCHING @@ -556,11 +559,10 @@ //#define MIN_BED_POWER 0 //#define PID_BED_DEBUG // Sends debug data to the serial port. - // 120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - // from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) - #define DEFAULT_bedKp 10.00 - #define DEFAULT_bedKi .023 - #define DEFAULT_bedKd 305.4 + // MeCreator2 generated by Autotune + #define DEFAULT_bedKp 182.46 // 175.68 189.95 + #define DEFAULT_bedKi 35.92 // 34.59 37.40 + #define DEFAULT_bedKd 231.70 // 223.07 241.19 // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. #endif // PIDTEMPBED @@ -634,7 +636,7 @@ * Note: For Bowden Extruders make this large enough to allow load/unload. */ #define PREVENT_LENGTHY_EXTRUDE -#define EXTRUDE_MAXLENGTH 200 +#define EXTRUDE_MAXLENGTH 450 //=========================================================================== //======================== Thermal Runaway Protection ======================= @@ -717,13 +719,13 @@ #endif // Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define X_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_PROBE_ENDSTOP_INVERTING false // Set to true to invert the logic of the probe. +#define X_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Y_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Z_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define X_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Y_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Z_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Z_MIN_PROBE_ENDSTOP_INVERTING true // Set to true to invert the logic of the probe. /** * Stepper Drivers @@ -806,14 +808,14 @@ * Override with M92 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 500 } +#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 430 } /** * Default Max Feed Rate (mm/s) * Override with M203 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 } +#define DEFAULT_MAX_FEEDRATE { 500, 500, 5, 25 } //#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 #if ENABLED(LIMITED_MAX_FR_EDITING) @@ -826,7 +828,7 @@ * Override with M201 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 } +#define DEFAULT_MAX_ACCELERATION { 500, 500, 100, 5000 } //#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 #if ENABLED(LIMITED_MAX_ACCEL_EDITING) @@ -841,9 +843,9 @@ * M204 R Retract Acceleration * M204 T Travel Acceleration */ -#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves +#define DEFAULT_ACCELERATION 1000 // X, Y, Z and E acceleration for printing moves +#define DEFAULT_RETRACT_ACCELERATION 2000 // E acceleration for retracts +#define DEFAULT_TRAVEL_ACCELERATION 1000 // X, Y, Z acceleration for travel (non printing) moves /** * Default Jerk limits (mm/s) @@ -857,7 +859,7 @@ #if ENABLED(CLASSIC_JERK) #define DEFAULT_XJERK 10.0 #define DEFAULT_YJERK 10.0 - #define DEFAULT_ZJERK 0.3 + #define DEFAULT_ZJERK 0.4 //#define TRAVEL_EXTRA_XYJERK 0.0 // Additional jerk allowance for all travel moves @@ -877,7 +879,7 @@ * https://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html */ #if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.013 // (mm) Distance from real junction edge + #define JUNCTION_DEVIATION_MM 0.04 // (mm) Distance from real junction edge #define JD_HANDLE_SMALL_SEGMENTS // Use curvature estimation instead of just the junction angle // for small segments (< 1mm) with large junction angles (> 135°). #endif @@ -940,7 +942,7 @@ * Use G29 repeatedly, adjusting the Z height at each point with movement commands * or (with LCD_BED_LEVELING) the LCD controller. */ -//#define PROBE_MANUALLY +#define PROBE_MANUALLY /** * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. @@ -1055,17 +1057,17 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +#define NOZZLE_TO_PROBE_OFFSET { -40, 0, 0 } // Most probes should stay away from the edges of the bed, but // with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed (mm/min) between probes -#define XY_PROBE_FEEDRATE (133*60) +#define XY_PROBE_FEEDRATE (80*60) // Feedrate (mm/min) for the first approach when double-probing (MULTIPLE_PROBING == 2) -#define Z_PROBE_FEEDRATE_FAST (4*60) +#define Z_PROBE_FEEDRATE_FAST (20*60) // Feedrate (mm/min) for the "accurate" probe of each point #define Z_PROBE_FEEDRATE_SLOW (Z_PROBE_FEEDRATE_FAST / 2) @@ -1106,7 +1108,7 @@ * A total of 2 does fast/slow probes with a weighted average. * A total of 3 or more adds more slow probes, taking the average. */ -//#define MULTIPLE_PROBING 2 +#define MULTIPLE_PROBING 2 //#define EXTRA_PROBING 1 /** @@ -1123,16 +1125,16 @@ * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. */ -#define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow -#define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points -#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes -//#define Z_AFTER_PROBING 5 // Z position after probing is done +#define Z_CLEARANCE_DEPLOY_PROBE 5 // Z Clearance for Deploy/Stow +#define Z_CLEARANCE_BETWEEN_PROBES 3 // Z Clearance between probe points +#define Z_CLEARANCE_MULTI_PROBE 2 // Z Clearance between multiple probes +#define Z_AFTER_PROBING 3 // Z position after probing is done #define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping // For M851 give a range for adjusting the Z probe offset #define Z_PROBE_OFFSET_RANGE_MIN -20 -#define Z_PROBE_OFFSET_RANGE_MAX 20 +#define Z_PROBE_OFFSET_RANGE_MAX 0 // Enable the M48 repeatability test to test probe accuracy //#define Z_MIN_PROBE_REPEATABILITY_TEST @@ -1150,14 +1152,14 @@ * These options are most useful for the BLTouch probe, but may also improve * readings with inductive probes and piezo sensors. */ -//#define PROBING_HEATERS_OFF // Turn heaters off when probing +#define PROBING_HEATERS_OFF // Turn heaters off when probing #if ENABLED(PROBING_HEATERS_OFF) - //#define WAIT_FOR_BED_HEATER // Wait for bed to heat back up between probes (to improve accuracy) + #define WAIT_FOR_BED_HEATER // Wait for bed to heat back up between probes (to improve accuracy) //#define WAIT_FOR_HOTEND // Wait for hotend to heat back up between probes (to improve accuracy & prevent cold extrude) #endif -//#define PROBING_FANS_OFF // Turn fans off when probing +#define PROBING_FANS_OFF // Turn fans off when probing //#define PROBING_STEPPERS_OFF // Turn steppers off (unless needed to hold position) when probing -//#define DELAY_BEFORE_PROBING 200 // (ms) To prevent vibrations from triggering piezo sensors +#define DELAY_BEFORE_PROBING 100 // (ms) To prevent vibrations from triggering piezo sensors // Require minimum nozzle and/or bed temperature for probing //#define PREHEAT_BEFORE_PROBING @@ -1190,7 +1192,7 @@ // @section machine // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR false +#define INVERT_X_DIR true #define INVERT_Y_DIR true #define INVERT_Z_DIR false @@ -1232,16 +1234,16 @@ // @section machine // The size of the printable area -#define X_BED_SIZE 200 -#define Y_BED_SIZE 200 +#define X_BED_SIZE 230 +#define Y_BED_SIZE 230 // Travel limits (mm) after homing, corresponding to endstop positions. -#define X_MIN_POS 0 +#define X_MIN_POS -5 #define Y_MIN_POS 0 #define Z_MIN_POS 0 #define X_MAX_POS X_BED_SIZE #define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 200 +#define Z_MAX_POS 260 /** * Software Endstops @@ -1285,12 +1287,15 @@ * RAMPS-based boards use SERVO3_PIN for the first runout sensor. * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. */ -//#define FILAMENT_RUNOUT_SENSOR +#define FILAMENT_RUNOUT_SENSOR #if ENABLED(FILAMENT_RUNOUT_SENSOR) #define FIL_RUNOUT_ENABLED_DEFAULT true // Enable the sensor on startup. Override with M412 followed by M500. - #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. + #define NUM_RUNOUT_SENSORS 3 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. + #define FIL_RUNOUT_PIN 66 + #define FIL_RUNOUT2_PIN 67 + #define FIL_RUNOUT3_PIN 68 - #define FIL_RUNOUT_STATE LOW // Pin state indicating that filament is NOT present. + #define FIL_RUNOUT_STATE HIGH // Pin state indicating that filament is NOT present. #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. //#define WATCH_ALL_RUNOUT_SENSORS // Execute runout script on any triggering sensor, not only for the active extruder. @@ -1387,7 +1392,7 @@ */ //#define AUTO_BED_LEVELING_3POINT //#define AUTO_BED_LEVELING_LINEAR -//#define AUTO_BED_LEVELING_BILINEAR +#define AUTO_BED_LEVELING_BILINEAR //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING @@ -1454,7 +1459,7 @@ #if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR) // Set the number of grid points per dimension. - #define GRID_MAX_POINTS_X 3 + #define GRID_MAX_POINTS_X 5 #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X // Probe along the Y axis, advancing X after each column @@ -1518,7 +1523,7 @@ * Add a bed leveling sub-menu for ABL or MBL. * Include a guided procedure if manual probing is enabled. */ -//#define LCD_BED_LEVELING +#define LCD_BED_LEVELING #if ENABLED(LCD_BED_LEVELING) #define MESH_EDIT_Z_STEP 0.025 // (mm) Step size while manually probing Z axis. @@ -1527,7 +1532,7 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS +#define LEVEL_BED_CORNERS #if ENABLED(LEVEL_BED_CORNERS) #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets @@ -1595,7 +1600,7 @@ #endif // Homing speeds (mm/min) -#define HOMING_FEEDRATE_MM_M { (50*60), (50*60), (4*60) } +#define HOMING_FEEDRATE_MM_M { (80*60), (80*60), (20*60) } // Validate that endstops are triggered on homing moves #define VALIDATE_HOMING_ENDSTOPS @@ -1672,7 +1677,7 @@ * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) */ -//#define EEPROM_SETTINGS // Persistent storage with M500 and M501 +#define EEPROM_SETTINGS // Persistent storage with M500 and M501 //#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. #define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load @@ -1706,14 +1711,14 @@ // Preheat Constants - Up to 5 are supported without changes // #define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 180 -#define PREHEAT_1_TEMP_BED 70 +#define PREHEAT_1_TEMP_HOTEND 190 +#define PREHEAT_1_TEMP_BED 60 #define PREHEAT_1_TEMP_CHAMBER 35 #define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 #define PREHEAT_2_LABEL "ABS" #define PREHEAT_2_TEMP_HOTEND 240 -#define PREHEAT_2_TEMP_BED 110 +#define PREHEAT_2_TEMP_BED 90 #define PREHEAT_2_TEMP_CHAMBER 35 #define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 @@ -1728,11 +1733,11 @@ * P1 Raise the nozzle always to Z-park height. * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. */ -//#define NOZZLE_PARK_FEATURE +#define NOZZLE_PARK_FEATURE #if ENABLED(NOZZLE_PARK_FEATURE) // Specify a park position as { X, Y, Z_raise } - #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 } + #define NOZZLE_PARK_POINT { 3, (Y_MAX_POS - 3), 10 } //#define NOZZLE_PARK_X_ONLY // X move only is required to park //#define NOZZLE_PARK_Y_ONLY // Y move only is required to park #define NOZZLE_PARK_Z_RAISE_MIN 2 // (mm) Always raise Z by at least this distance @@ -1936,7 +1941,7 @@ * SD Card support is disabled by default. If your controller has an SD slot, * you must uncomment the following option or it won't work. */ -//#define SDSUPPORT +#define SDSUPPORT /** * SD CARD: ENABLE CRC @@ -1960,7 +1965,7 @@ // This option overrides the default number of encoder pulses needed to // produce one step. Should be increased for high-resolution encoders. // -//#define ENCODER_PULSES_PER_STEP 4 +#define ENCODER_PULSES_PER_STEP 2 // // Use this option to override the number of step signals required to @@ -2014,7 +2019,7 @@ // If you have a speaker that can produce tones, enable it here. // By default Marlin assumes you have a buzzer with a fixed frequency. // -//#define SPEAKER +#define SPEAKER // // The duration and frequency for the UI feedback sound. @@ -2037,7 +2042,7 @@ // // Note: Usually sold with a white PCB. // -//#define REPRAP_DISCOUNT_SMART_CONTROLLER +#define REPRAP_DISCOUNT_SMART_CONTROLLER // // GT2560 (YHCB2004) LCD Display diff --git a/config/examples/Geeetech/A10T/YHCB2004_V4.1/Configuration.h b/config/examples/Geeetech/A10T/YHCB2004_V4.1/Configuration.h index 78c2dc9160..755a89e37a 100644 --- a/config/examples/Geeetech/A10T/YHCB2004_V4.1/Configuration.h +++ b/config/examples/Geeetech/A10T/YHCB2004_V4.1/Configuration.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Geeetech/A10T/YHCB2004_V4.1" + /** * Configuration.h * @@ -134,11 +136,11 @@ // Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_RAMPS_14_EFB + #define MOTHERBOARD BOARD_GT2560_V3 #endif // Name displayed in the LCD "Ready" message and Info menu -//#define CUSTOM_MACHINE_NAME "3D Printer" +#define CUSTOM_MACHINE_NAME "Geeetech A10T" // Printer's unique ID, used by some programs to differentiate between machines. // Choose your own or use a service like https://www.uuidgenerator.net/version4 @@ -292,14 +294,14 @@ * - This implementation supports up to two mixing extruders. * - Enable DIRECT_MIXING_IN_G1 for M165 and mixing in G1 (from Pia Taubert's reference implementation). */ -//#define MIXING_EXTRUDER +#define MIXING_EXTRUDER #if ENABLED(MIXING_EXTRUDER) - #define MIXING_STEPPERS 2 // Number of steppers in your mixing extruder + #define MIXING_STEPPERS 3 // Number of steppers in your mixing extruder #define MIXING_VIRTUAL_TOOLS 16 // Use the Virtual Tool method with M163 and M164 //#define DIRECT_MIXING_IN_G1 // Allow ABCDHI mix factors in G1 movement commands - //#define GRADIENT_MIX // Support for gradient mixing with M166 and LCD + #define GRADIENT_MIX // Support for gradient mixing with M166 and LCD #if ENABLED(GRADIENT_MIX) - //#define GRADIENT_VTOOL // Add M166 T to use a V-tool index as a Gradient alias + #define GRADIENT_VTOOL // Add M166 T to use a V-tool index as a Gradient alias #endif #endif @@ -424,7 +426,7 @@ #define TEMP_SENSOR_5 0 #define TEMP_SENSOR_6 0 #define TEMP_SENSOR_7 0 -#define TEMP_SENSOR_BED 0 +#define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 #define TEMP_SENSOR_COOLER 0 @@ -506,20 +508,21 @@ #if ENABLED(PIDTEMP) //#define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) - //#define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) + #define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) // Set/get with gcode: M301 E[extruder number, 0-2] + // A10M [@thinkyhead] #if ENABLED(PID_PARAMS_PER_HOTEND) // Specify between 1 and HOTENDS values per array. // If fewer than EXTRUDER values are provided, the last element will be repeated. - #define DEFAULT_Kp_LIST { 22.20, 22.20 } - #define DEFAULT_Ki_LIST { 1.08, 1.08 } - #define DEFAULT_Kd_LIST { 114.00, 114.00 } + #define DEFAULT_Kp_LIST { 45.80, 45.80 } + #define DEFAULT_Ki_LIST { 3.61, 3.61 } + #define DEFAULT_Kd_LIST { 145.39, 145.39 } #else - #define DEFAULT_Kp 22.20 - #define DEFAULT_Ki 1.08 - #define DEFAULT_Kd 114.00 + #define DEFAULT_Kp 45.80 + #define DEFAULT_Ki 3.61 + #define DEFAULT_Kd 145.39 #endif #endif // PIDTEMP @@ -540,7 +543,7 @@ * heater. If your configuration is significantly different than this and you don't understand * the issues involved, don't use bed PID until someone else verifies that your hardware works. */ -//#define PIDTEMPBED +#define PIDTEMPBED //#define BED_LIMIT_SWITCHING @@ -556,11 +559,10 @@ //#define MIN_BED_POWER 0 //#define PID_BED_DEBUG // Sends debug data to the serial port. - // 120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - // from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) - #define DEFAULT_bedKp 10.00 - #define DEFAULT_bedKi .023 - #define DEFAULT_bedKd 305.4 + // MeCreator2 generated by Autotune + #define DEFAULT_bedKp 182.46 // 175.68 189.95 + #define DEFAULT_bedKi 35.92 // 34.59 37.40 + #define DEFAULT_bedKd 231.70 // 223.07 241.19 // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. #endif // PIDTEMPBED @@ -634,7 +636,7 @@ * Note: For Bowden Extruders make this large enough to allow load/unload. */ #define PREVENT_LENGTHY_EXTRUDE -#define EXTRUDE_MAXLENGTH 200 +#define EXTRUDE_MAXLENGTH 450 //=========================================================================== //======================== Thermal Runaway Protection ======================= @@ -717,13 +719,13 @@ #endif // Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define X_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_PROBE_ENDSTOP_INVERTING false // Set to true to invert the logic of the probe. +#define X_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Y_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Z_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define X_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Y_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Z_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Z_MIN_PROBE_ENDSTOP_INVERTING true // Set to true to invert the logic of the probe. /** * Stepper Drivers @@ -806,14 +808,14 @@ * Override with M92 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 500 } +#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 430 } /** * Default Max Feed Rate (mm/s) * Override with M203 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 } +#define DEFAULT_MAX_FEEDRATE { 500, 500, 5, 25 } //#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 #if ENABLED(LIMITED_MAX_FR_EDITING) @@ -826,7 +828,7 @@ * Override with M201 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 } +#define DEFAULT_MAX_ACCELERATION { 500, 500, 100, 5000 } //#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 #if ENABLED(LIMITED_MAX_ACCEL_EDITING) @@ -841,9 +843,9 @@ * M204 R Retract Acceleration * M204 T Travel Acceleration */ -#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves +#define DEFAULT_ACCELERATION 1000 // X, Y, Z and E acceleration for printing moves +#define DEFAULT_RETRACT_ACCELERATION 2000 // E acceleration for retracts +#define DEFAULT_TRAVEL_ACCELERATION 1000 // X, Y, Z acceleration for travel (non printing) moves /** * Default Jerk limits (mm/s) @@ -857,7 +859,7 @@ #if ENABLED(CLASSIC_JERK) #define DEFAULT_XJERK 10.0 #define DEFAULT_YJERK 10.0 - #define DEFAULT_ZJERK 0.3 + #define DEFAULT_ZJERK 0.4 //#define TRAVEL_EXTRA_XYJERK 0.0 // Additional jerk allowance for all travel moves @@ -877,7 +879,7 @@ * https://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html */ #if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.013 // (mm) Distance from real junction edge + #define JUNCTION_DEVIATION_MM 0.04 // (mm) Distance from real junction edge #define JD_HANDLE_SMALL_SEGMENTS // Use curvature estimation instead of just the junction angle // for small segments (< 1mm) with large junction angles (> 135°). #endif @@ -940,7 +942,7 @@ * Use G29 repeatedly, adjusting the Z height at each point with movement commands * or (with LCD_BED_LEVELING) the LCD controller. */ -//#define PROBE_MANUALLY +#define PROBE_MANUALLY /** * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. @@ -1055,17 +1057,17 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +#define NOZZLE_TO_PROBE_OFFSET { -40, 0, 0 } // Most probes should stay away from the edges of the bed, but // with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed (mm/min) between probes -#define XY_PROBE_FEEDRATE (133*60) +#define XY_PROBE_FEEDRATE (80*60) // Feedrate (mm/min) for the first approach when double-probing (MULTIPLE_PROBING == 2) -#define Z_PROBE_FEEDRATE_FAST (4*60) +#define Z_PROBE_FEEDRATE_FAST (20*60) // Feedrate (mm/min) for the "accurate" probe of each point #define Z_PROBE_FEEDRATE_SLOW (Z_PROBE_FEEDRATE_FAST / 2) @@ -1106,7 +1108,7 @@ * A total of 2 does fast/slow probes with a weighted average. * A total of 3 or more adds more slow probes, taking the average. */ -//#define MULTIPLE_PROBING 2 +#define MULTIPLE_PROBING 2 //#define EXTRA_PROBING 1 /** @@ -1123,16 +1125,16 @@ * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. */ -#define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow -#define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points -#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes -//#define Z_AFTER_PROBING 5 // Z position after probing is done +#define Z_CLEARANCE_DEPLOY_PROBE 5 // Z Clearance for Deploy/Stow +#define Z_CLEARANCE_BETWEEN_PROBES 3 // Z Clearance between probe points +#define Z_CLEARANCE_MULTI_PROBE 2 // Z Clearance between multiple probes +#define Z_AFTER_PROBING 3 // Z position after probing is done #define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping // For M851 give a range for adjusting the Z probe offset #define Z_PROBE_OFFSET_RANGE_MIN -20 -#define Z_PROBE_OFFSET_RANGE_MAX 20 +#define Z_PROBE_OFFSET_RANGE_MAX 0 // Enable the M48 repeatability test to test probe accuracy //#define Z_MIN_PROBE_REPEATABILITY_TEST @@ -1150,14 +1152,14 @@ * These options are most useful for the BLTouch probe, but may also improve * readings with inductive probes and piezo sensors. */ -//#define PROBING_HEATERS_OFF // Turn heaters off when probing +#define PROBING_HEATERS_OFF // Turn heaters off when probing #if ENABLED(PROBING_HEATERS_OFF) - //#define WAIT_FOR_BED_HEATER // Wait for bed to heat back up between probes (to improve accuracy) + #define WAIT_FOR_BED_HEATER // Wait for bed to heat back up between probes (to improve accuracy) //#define WAIT_FOR_HOTEND // Wait for hotend to heat back up between probes (to improve accuracy & prevent cold extrude) #endif -//#define PROBING_FANS_OFF // Turn fans off when probing +#define PROBING_FANS_OFF // Turn fans off when probing //#define PROBING_STEPPERS_OFF // Turn steppers off (unless needed to hold position) when probing -//#define DELAY_BEFORE_PROBING 200 // (ms) To prevent vibrations from triggering piezo sensors +#define DELAY_BEFORE_PROBING 100 // (ms) To prevent vibrations from triggering piezo sensors // Require minimum nozzle and/or bed temperature for probing //#define PREHEAT_BEFORE_PROBING @@ -1190,7 +1192,7 @@ // @section machine // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR false +#define INVERT_X_DIR true #define INVERT_Y_DIR true #define INVERT_Z_DIR false @@ -1232,16 +1234,16 @@ // @section machine // The size of the printable area -#define X_BED_SIZE 200 -#define Y_BED_SIZE 200 +#define X_BED_SIZE 230 +#define Y_BED_SIZE 230 // Travel limits (mm) after homing, corresponding to endstop positions. -#define X_MIN_POS 0 +#define X_MIN_POS -5 #define Y_MIN_POS 0 #define Z_MIN_POS 0 #define X_MAX_POS X_BED_SIZE #define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 200 +#define Z_MAX_POS 260 /** * Software Endstops @@ -1285,12 +1287,15 @@ * RAMPS-based boards use SERVO3_PIN for the first runout sensor. * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. */ -//#define FILAMENT_RUNOUT_SENSOR +#define FILAMENT_RUNOUT_SENSOR #if ENABLED(FILAMENT_RUNOUT_SENSOR) #define FIL_RUNOUT_ENABLED_DEFAULT true // Enable the sensor on startup. Override with M412 followed by M500. - #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. + #define NUM_RUNOUT_SENSORS 3 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. + #define FIL_RUNOUT_PIN 66 + #define FIL_RUNOUT2_PIN 67 + #define FIL_RUNOUT3_PIN 68 - #define FIL_RUNOUT_STATE LOW // Pin state indicating that filament is NOT present. + #define FIL_RUNOUT_STATE HIGH // Pin state indicating that filament is NOT present. #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. //#define WATCH_ALL_RUNOUT_SENSORS // Execute runout script on any triggering sensor, not only for the active extruder. @@ -1387,7 +1392,7 @@ */ //#define AUTO_BED_LEVELING_3POINT //#define AUTO_BED_LEVELING_LINEAR -//#define AUTO_BED_LEVELING_BILINEAR +#define AUTO_BED_LEVELING_BILINEAR //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING @@ -1454,7 +1459,7 @@ #if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR) // Set the number of grid points per dimension. - #define GRID_MAX_POINTS_X 3 + #define GRID_MAX_POINTS_X 5 #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X // Probe along the Y axis, advancing X after each column @@ -1518,7 +1523,7 @@ * Add a bed leveling sub-menu for ABL or MBL. * Include a guided procedure if manual probing is enabled. */ -//#define LCD_BED_LEVELING +#define LCD_BED_LEVELING #if ENABLED(LCD_BED_LEVELING) #define MESH_EDIT_Z_STEP 0.025 // (mm) Step size while manually probing Z axis. @@ -1527,7 +1532,7 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS +#define LEVEL_BED_CORNERS #if ENABLED(LEVEL_BED_CORNERS) #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets @@ -1595,7 +1600,7 @@ #endif // Homing speeds (mm/min) -#define HOMING_FEEDRATE_MM_M { (50*60), (50*60), (4*60) } +#define HOMING_FEEDRATE_MM_M { (80*60), (80*60), (20*60) } // Validate that endstops are triggered on homing moves #define VALIDATE_HOMING_ENDSTOPS @@ -1672,7 +1677,7 @@ * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) */ -//#define EEPROM_SETTINGS // Persistent storage with M500 and M501 +#define EEPROM_SETTINGS // Persistent storage with M500 and M501 //#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. #define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load @@ -1706,14 +1711,14 @@ // Preheat Constants - Up to 5 are supported without changes // #define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 180 -#define PREHEAT_1_TEMP_BED 70 +#define PREHEAT_1_TEMP_HOTEND 190 +#define PREHEAT_1_TEMP_BED 60 #define PREHEAT_1_TEMP_CHAMBER 35 #define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 #define PREHEAT_2_LABEL "ABS" #define PREHEAT_2_TEMP_HOTEND 240 -#define PREHEAT_2_TEMP_BED 110 +#define PREHEAT_2_TEMP_BED 90 #define PREHEAT_2_TEMP_CHAMBER 35 #define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 @@ -1728,11 +1733,11 @@ * P1 Raise the nozzle always to Z-park height. * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. */ -//#define NOZZLE_PARK_FEATURE +#define NOZZLE_PARK_FEATURE #if ENABLED(NOZZLE_PARK_FEATURE) // Specify a park position as { X, Y, Z_raise } - #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 } + #define NOZZLE_PARK_POINT { 3, (Y_MAX_POS - 3), 10 } //#define NOZZLE_PARK_X_ONLY // X move only is required to park //#define NOZZLE_PARK_Y_ONLY // Y move only is required to park #define NOZZLE_PARK_Z_RAISE_MIN 2 // (mm) Always raise Z by at least this distance @@ -1936,7 +1941,7 @@ * SD Card support is disabled by default. If your controller has an SD slot, * you must uncomment the following option or it won't work. */ -//#define SDSUPPORT +#define SDSUPPORT /** * SD CARD: ENABLE CRC @@ -1960,7 +1965,7 @@ // This option overrides the default number of encoder pulses needed to // produce one step. Should be increased for high-resolution encoders. // -//#define ENCODER_PULSES_PER_STEP 4 +#define ENCODER_PULSES_PER_STEP 2 // // Use this option to override the number of step signals required to @@ -2014,7 +2019,7 @@ // If you have a speaker that can produce tones, enable it here. // By default Marlin assumes you have a buzzer with a fixed frequency. // -//#define SPEAKER +#define SPEAKER // // The duration and frequency for the UI feedback sound. @@ -2045,7 +2050,7 @@ // Requires Testato, Koepel softwarewire library and // Andriy Golovnya's LiquidCrystal_AIP31068 library. // -//#define YHCB2004 +#define YHCB2004 // // Original RADDS LCD Display+Encoder+SDCardReader diff --git a/config/examples/Geeetech/A20/Configuration.h b/config/examples/Geeetech/A20/Configuration.h index 78c2dc9160..63b365337a 100644 --- a/config/examples/Geeetech/A20/Configuration.h +++ b/config/examples/Geeetech/A20/Configuration.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Geeetech/A20" + /** * Configuration.h * @@ -127,18 +129,18 @@ * * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ -#define BAUDRATE 250000 +#define BAUDRATE 115200 // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH // Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_RAMPS_14_EFB + #define MOTHERBOARD BOARD_GT2560_V3_A20 #endif // Name displayed in the LCD "Ready" message and Info menu -//#define CUSTOM_MACHINE_NAME "3D Printer" +#define CUSTOM_MACHINE_NAME "Geeetech A20" // Printer's unique ID, used by some programs to differentiate between machines. // Choose your own or use a service like https://www.uuidgenerator.net/version4 @@ -297,9 +299,9 @@ #define MIXING_STEPPERS 2 // Number of steppers in your mixing extruder #define MIXING_VIRTUAL_TOOLS 16 // Use the Virtual Tool method with M163 and M164 //#define DIRECT_MIXING_IN_G1 // Allow ABCDHI mix factors in G1 movement commands - //#define GRADIENT_MIX // Support for gradient mixing with M166 and LCD + #define GRADIENT_MIX // Support for gradient mixing with M166 and LCD #if ENABLED(GRADIENT_MIX) - //#define GRADIENT_VTOOL // Add M166 T to use a V-tool index as a Gradient alias + #define GRADIENT_VTOOL // Add M166 T to use a V-tool index as a Gradient alias #endif #endif @@ -424,7 +426,7 @@ #define TEMP_SENSOR_5 0 #define TEMP_SENSOR_6 0 #define TEMP_SENSOR_7 0 -#define TEMP_SENSOR_BED 0 +#define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 #define TEMP_SENSOR_COOLER 0 @@ -506,20 +508,21 @@ #if ENABLED(PIDTEMP) //#define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) - //#define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) + #define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) // Set/get with gcode: M301 E[extruder number, 0-2] + // A20M [@thinkyhead] #if ENABLED(PID_PARAMS_PER_HOTEND) // Specify between 1 and HOTENDS values per array. // If fewer than EXTRUDER values are provided, the last element will be repeated. - #define DEFAULT_Kp_LIST { 22.20, 22.20 } - #define DEFAULT_Ki_LIST { 1.08, 1.08 } - #define DEFAULT_Kd_LIST { 114.00, 114.00 } + #define DEFAULT_Kp_LIST { 45.80, 45.80 } + #define DEFAULT_Ki_LIST { 3.61, 3.61 } + #define DEFAULT_Kd_LIST { 145.39, 145.39 } #else - #define DEFAULT_Kp 22.20 - #define DEFAULT_Ki 1.08 - #define DEFAULT_Kd 114.00 + #define DEFAULT_Kp 45.80 + #define DEFAULT_Ki 3.61 + #define DEFAULT_Kd 145.39 #endif #endif // PIDTEMP @@ -540,7 +543,7 @@ * heater. If your configuration is significantly different than this and you don't understand * the issues involved, don't use bed PID until someone else verifies that your hardware works. */ -//#define PIDTEMPBED +#define PIDTEMPBED //#define BED_LIMIT_SWITCHING @@ -556,11 +559,10 @@ //#define MIN_BED_POWER 0 //#define PID_BED_DEBUG // Sends debug data to the serial port. - // 120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - // from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) - #define DEFAULT_bedKp 10.00 - #define DEFAULT_bedKi .023 - #define DEFAULT_bedKd 305.4 + // MeCreator2 generated by Autotune + #define DEFAULT_bedKp 182.46 // 175.68 189.95 + #define DEFAULT_bedKi 35.92 // 34.59 37.40 + #define DEFAULT_bedKd 231.70 // 223.07 241.19 // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. #endif // PIDTEMPBED @@ -634,7 +636,7 @@ * Note: For Bowden Extruders make this large enough to allow load/unload. */ #define PREVENT_LENGTHY_EXTRUDE -#define EXTRUDE_MAXLENGTH 200 +#define EXTRUDE_MAXLENGTH 400 //=========================================================================== //======================== Thermal Runaway Protection ======================= @@ -717,13 +719,13 @@ #endif // Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define X_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_PROBE_ENDSTOP_INVERTING false // Set to true to invert the logic of the probe. +#define X_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Y_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Z_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define X_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Y_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Z_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Z_MIN_PROBE_ENDSTOP_INVERTING true // Set to true to invert the logic of the probe. /** * Stepper Drivers @@ -806,14 +808,14 @@ * Override with M92 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 500 } +#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 93 } /** * Default Max Feed Rate (mm/s) * Override with M203 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 } +#define DEFAULT_MAX_FEEDRATE { 500, 500, 5, 25 } //#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 #if ENABLED(LIMITED_MAX_FR_EDITING) @@ -826,7 +828,7 @@ * Override with M201 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 } +#define DEFAULT_MAX_ACCELERATION { 500, 500, 100, 5000 } //#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 #if ENABLED(LIMITED_MAX_ACCEL_EDITING) @@ -841,9 +843,9 @@ * M204 R Retract Acceleration * M204 T Travel Acceleration */ -#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves +#define DEFAULT_ACCELERATION 1000 // X, Y, Z and E acceleration for printing moves +#define DEFAULT_RETRACT_ACCELERATION 2000 // E acceleration for retracts +#define DEFAULT_TRAVEL_ACCELERATION 1000 // X, Y, Z acceleration for travel (non printing) moves /** * Default Jerk limits (mm/s) @@ -857,7 +859,7 @@ #if ENABLED(CLASSIC_JERK) #define DEFAULT_XJERK 10.0 #define DEFAULT_YJERK 10.0 - #define DEFAULT_ZJERK 0.3 + #define DEFAULT_ZJERK 0.4 //#define TRAVEL_EXTRA_XYJERK 0.0 // Additional jerk allowance for all travel moves @@ -877,7 +879,7 @@ * https://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html */ #if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.013 // (mm) Distance from real junction edge + #define JUNCTION_DEVIATION_MM 0.04 // (mm) Distance from real junction edge #define JD_HANDLE_SMALL_SEGMENTS // Use curvature estimation instead of just the junction angle // for small segments (< 1mm) with large junction angles (> 135°). #endif @@ -890,7 +892,7 @@ * * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained */ -//#define S_CURVE_ACCELERATION +#define S_CURVE_ACCELERATION //=========================================================================== //============================= Z Probe Options ============================= @@ -940,7 +942,7 @@ * Use G29 repeatedly, adjusting the Z height at each point with movement commands * or (with LCD_BED_LEVELING) the LCD controller. */ -//#define PROBE_MANUALLY +#define PROBE_MANUALLY /** * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. @@ -1055,7 +1057,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +#define NOZZLE_TO_PROBE_OFFSET { -37, 0, -3.6 } // Most probes should stay away from the edges of the bed, but // with NOZZLE_AS_PROBE this can be negative for a wider probing area. @@ -1065,7 +1067,7 @@ #define XY_PROBE_FEEDRATE (133*60) // Feedrate (mm/min) for the first approach when double-probing (MULTIPLE_PROBING == 2) -#define Z_PROBE_FEEDRATE_FAST (4*60) +#define Z_PROBE_FEEDRATE_FAST (20*60) // Feedrate (mm/min) for the "accurate" probe of each point #define Z_PROBE_FEEDRATE_SLOW (Z_PROBE_FEEDRATE_FAST / 2) @@ -1106,7 +1108,7 @@ * A total of 2 does fast/slow probes with a weighted average. * A total of 3 or more adds more slow probes, taking the average. */ -//#define MULTIPLE_PROBING 2 +#define MULTIPLE_PROBING 2 //#define EXTRA_PROBING 1 /** @@ -1123,16 +1125,16 @@ * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. */ -#define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow -#define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points -#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes -//#define Z_AFTER_PROBING 5 // Z position after probing is done +#define Z_CLEARANCE_DEPLOY_PROBE 5 // Z Clearance for Deploy/Stow +#define Z_CLEARANCE_BETWEEN_PROBES 3 // Z Clearance between probe points +#define Z_CLEARANCE_MULTI_PROBE 2 // Z Clearance between multiple probes +#define Z_AFTER_PROBING 3 // Z position after probing is done #define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping // For M851 give a range for adjusting the Z probe offset -#define Z_PROBE_OFFSET_RANGE_MIN -20 -#define Z_PROBE_OFFSET_RANGE_MAX 20 +#define Z_PROBE_OFFSET_RANGE_MIN -5 +#define Z_PROBE_OFFSET_RANGE_MAX 0 // Enable the M48 repeatability test to test probe accuracy //#define Z_MIN_PROBE_REPEATABILITY_TEST @@ -1150,14 +1152,14 @@ * These options are most useful for the BLTouch probe, but may also improve * readings with inductive probes and piezo sensors. */ -//#define PROBING_HEATERS_OFF // Turn heaters off when probing +#define PROBING_HEATERS_OFF // Turn heaters off when probing #if ENABLED(PROBING_HEATERS_OFF) //#define WAIT_FOR_BED_HEATER // Wait for bed to heat back up between probes (to improve accuracy) //#define WAIT_FOR_HOTEND // Wait for hotend to heat back up between probes (to improve accuracy & prevent cold extrude) #endif -//#define PROBING_FANS_OFF // Turn fans off when probing +#define PROBING_FANS_OFF // Turn fans off when probing //#define PROBING_STEPPERS_OFF // Turn steppers off (unless needed to hold position) when probing -//#define DELAY_BEFORE_PROBING 200 // (ms) To prevent vibrations from triggering piezo sensors +#define DELAY_BEFORE_PROBING 100 // (ms) To prevent vibrations from triggering piezo sensors // Require minimum nozzle and/or bed temperature for probing //#define PREHEAT_BEFORE_PROBING @@ -1190,14 +1192,14 @@ // @section machine // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR false +#define INVERT_X_DIR true #define INVERT_Y_DIR true #define INVERT_Z_DIR false // @section extruder // For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR false +#define INVERT_E0_DIR true #define INVERT_E1_DIR false #define INVERT_E2_DIR false #define INVERT_E3_DIR false @@ -1232,16 +1234,16 @@ // @section machine // The size of the printable area -#define X_BED_SIZE 200 -#define Y_BED_SIZE 200 +#define X_BED_SIZE 255 +#define Y_BED_SIZE 255 // Travel limits (mm) after homing, corresponding to endstop positions. -#define X_MIN_POS 0 -#define Y_MIN_POS 0 +#define X_MIN_POS -10 +#define Y_MIN_POS -5 #define Z_MIN_POS 0 #define X_MAX_POS X_BED_SIZE #define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 200 +#define Z_MAX_POS 250 /** * Software Endstops @@ -1285,12 +1287,13 @@ * RAMPS-based boards use SERVO3_PIN for the first runout sensor. * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. */ -//#define FILAMENT_RUNOUT_SENSOR +#define FILAMENT_RUNOUT_SENSOR #if ENABLED(FILAMENT_RUNOUT_SENSOR) #define FIL_RUNOUT_ENABLED_DEFAULT true // Enable the sensor on startup. Override with M412 followed by M500. #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. + #define FIL_RUNOUT_PIN 66 - #define FIL_RUNOUT_STATE LOW // Pin state indicating that filament is NOT present. + #define FIL_RUNOUT_STATE HIGH // Pin state indicating that filament is NOT present. #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. //#define WATCH_ALL_RUNOUT_SENSORS // Execute runout script on any triggering sensor, not only for the active extruder. @@ -1387,7 +1390,7 @@ */ //#define AUTO_BED_LEVELING_3POINT //#define AUTO_BED_LEVELING_LINEAR -//#define AUTO_BED_LEVELING_BILINEAR +#define AUTO_BED_LEVELING_BILINEAR //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING @@ -1438,7 +1441,7 @@ /** * Enable the G26 Mesh Validation Pattern tool. */ - //#define G26_MESH_VALIDATION + #define G26_MESH_VALIDATION #if ENABLED(G26_MESH_VALIDATION) #define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle. #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for G26. @@ -1454,7 +1457,7 @@ #if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR) // Set the number of grid points per dimension. - #define GRID_MAX_POINTS_X 3 + #define GRID_MAX_POINTS_X 5 #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X // Probe along the Y axis, advancing X after each column @@ -1518,16 +1521,16 @@ * Add a bed leveling sub-menu for ABL or MBL. * Include a guided procedure if manual probing is enabled. */ -//#define LCD_BED_LEVELING +#define LCD_BED_LEVELING #if ENABLED(LCD_BED_LEVELING) #define MESH_EDIT_Z_STEP 0.025 // (mm) Step size while manually probing Z axis. #define LCD_PROBE_Z_RANGE 4 // (mm) Z Range centered on Z_MIN_POS for LCD Z adjustment - //#define MESH_EDIT_MENU // Add a menu to edit mesh points + #define MESH_EDIT_MENU // Add a menu to edit mesh points #endif // Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS +#define LEVEL_BED_CORNERS #if ENABLED(LEVEL_BED_CORNERS) #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets @@ -1595,7 +1598,7 @@ #endif // Homing speeds (mm/min) -#define HOMING_FEEDRATE_MM_M { (50*60), (50*60), (4*60) } +#define HOMING_FEEDRATE_MM_M { (80*60), (80*60), (20*60) } // Validate that endstops are triggered on homing moves #define VALIDATE_HOMING_ENDSTOPS @@ -1672,7 +1675,7 @@ * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) */ -//#define EEPROM_SETTINGS // Persistent storage with M500 and M501 +#define EEPROM_SETTINGS // Persistent storage with M500 and M501 //#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. #define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load @@ -1706,14 +1709,14 @@ // Preheat Constants - Up to 5 are supported without changes // #define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 180 -#define PREHEAT_1_TEMP_BED 70 +#define PREHEAT_1_TEMP_HOTEND 190 +#define PREHEAT_1_TEMP_BED 60 #define PREHEAT_1_TEMP_CHAMBER 35 #define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 #define PREHEAT_2_LABEL "ABS" #define PREHEAT_2_TEMP_HOTEND 240 -#define PREHEAT_2_TEMP_BED 110 +#define PREHEAT_2_TEMP_BED 90 #define PREHEAT_2_TEMP_CHAMBER 35 #define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 @@ -1728,11 +1731,11 @@ * P1 Raise the nozzle always to Z-park height. * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. */ -//#define NOZZLE_PARK_FEATURE +#define NOZZLE_PARK_FEATURE #if ENABLED(NOZZLE_PARK_FEATURE) // Specify a park position as { X, Y, Z_raise } - #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 } + #define NOZZLE_PARK_POINT { 3, (Y_MAX_POS - 3), 10 } //#define NOZZLE_PARK_X_ONLY // X move only is required to park //#define NOZZLE_PARK_Y_ONLY // Y move only is required to park #define NOZZLE_PARK_Z_RAISE_MIN 2 // (mm) Always raise Z by at least this distance @@ -1936,7 +1939,7 @@ * SD Card support is disabled by default. If your controller has an SD slot, * you must uncomment the following option or it won't work. */ -//#define SDSUPPORT +#define SDSUPPORT /** * SD CARD: ENABLE CRC @@ -1960,7 +1963,7 @@ // This option overrides the default number of encoder pulses needed to // produce one step. Should be increased for high-resolution encoders. // -//#define ENCODER_PULSES_PER_STEP 4 +#define ENCODER_PULSES_PER_STEP 2 // // Use this option to override the number of step signals required to @@ -2014,7 +2017,7 @@ // If you have a speaker that can produce tones, enable it here. // By default Marlin assumes you have a buzzer with a fixed frequency. // -//#define SPEAKER +#define SPEAKER // // The duration and frequency for the UI feedback sound. @@ -2195,7 +2198,10 @@ // RepRapDiscount FULL GRAPHIC Smart Controller // https://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller // -//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER +#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER +#define ST7920_DELAY_1 DELAY_NS(125) +#define ST7920_DELAY_2 DELAY_NS(125) +#define ST7920_DELAY_3 DELAY_NS(125) // // K.3D Full Graphic Smart Controller diff --git a/config/examples/Geeetech/A20/Configuration_adv.h b/config/examples/Geeetech/A20/Configuration_adv.h index 5335fa012a..2747b34af6 100644 --- a/config/examples/Geeetech/A20/Configuration_adv.h +++ b/config/examples/Geeetech/A20/Configuration_adv.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Geeetech/A20" + /** * Configuration_adv.h * @@ -741,7 +743,7 @@ //#define HOMING_BACKOFF_POST_MM { 2, 2, 2 } // (mm) Backoff from endstops after homing -//#define QUICK_HOME // If G28 contains XY do a diagonal move first +#define QUICK_HOME // If G28 contains XY do a diagonal move first //#define HOME_Y_BEFORE_X // If G28 contains XY home Y before X //#define HOME_Z_FIRST // Home Z first. Requires a Z-MIN endstop (not a probe). //#define CODEPENDENT_XY_HOMING // If X/Y can't home without homing Y/X first @@ -766,7 +768,7 @@ // Safety: The probe needs time to recognize the command. // Minimum command delay (ms). Enable and increase if needed. - //#define BLTOUCH_DELAY 500 + #define BLTOUCH_DELAY 200 /** * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones: @@ -808,7 +810,7 @@ * This feature was designed for Deltabots with very fast Z moves; however, higher speed Cartesians * might be able to use it. If the machine can't raise Z fast enough the BLTouch may go into ALARM. */ - //#define BLTOUCH_HS_MODE + #define BLTOUCH_HS_MODE // Safety: Enable voltage mode settings in the LCD menu. //#define BLTOUCH_LCD_VOLTAGE_MENU @@ -867,7 +869,7 @@ // On a 300mm bed a 5% grade would give a misalignment of ~1.5cm #define G34_MAX_GRADE 5 // (%) Maximum incline that G34 will handle - #define Z_STEPPER_ALIGN_ITERATIONS 5 // Number of iterations to apply during alignment + #define Z_STEPPER_ALIGN_ITERATIONS 3 // Number of iterations to apply during alignment #define Z_STEPPER_ALIGN_ACC 0.02 // Stop iterating early if the accuracy is better than this #define RESTORE_LEVELING_AFTER_G34 // Restore leveling after G34 is done? // After G34, re-home Z (G28 Z) or just calculate it from the last probe heights? @@ -1145,8 +1147,8 @@ // Change values more rapidly when the encoder is rotated faster #define ENCODER_RATE_MULTIPLIER #if ENABLED(ENCODER_RATE_MULTIPLIER) - #define ENCODER_10X_STEPS_PER_SEC 30 // (steps/s) Encoder rate for 10x speed - #define ENCODER_100X_STEPS_PER_SEC 80 // (steps/s) Encoder rate for 100x speed + #define ENCODER_10X_STEPS_PER_SEC 10 // (steps/s) Encoder rate for 10x speed + #define ENCODER_100X_STEPS_PER_SEC 50 // (steps/s) Encoder rate for 100x speed #endif // Play a beep when the feedrate is changed from the Status Screen @@ -1175,7 +1177,7 @@ #endif // Include a page of printer information in the LCD Main Menu - //#define LCD_INFO_MENU + #define LCD_INFO_MENU #if ENABLED(LCD_INFO_MENU) //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages #endif @@ -1229,7 +1231,7 @@ #endif // Scroll a longer status message into view - //#define STATUS_MESSAGE_SCROLLING + #define STATUS_MESSAGE_SCROLLING // On the Info Screen, display XY with one decimal place when possible //#define LCD_DECIMAL_SMALL_XY @@ -1253,11 +1255,11 @@ #endif #if EITHER(HAS_MARLINUI_HD44780, IS_TFTGLCD_PANEL) - //#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing + #define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing #if ENABLED(LCD_PROGRESS_BAR) #define PROGRESS_BAR_BAR_TIME 2000 // (ms) Amount of time to show the bar - #define PROGRESS_BAR_MSG_TIME 3000 // (ms) Amount of time to show the status message - #define PROGRESS_MSG_EXPIRE 0 // (ms) Amount of time to retain the status message (0=forever) + #define PROGRESS_BAR_MSG_TIME 3500 // (ms) Amount of time to show the status message + #define PROGRESS_MSG_EXPIRE 180000 // (ms) Amount of time to retain the status message (0=forever) //#define PROGRESS_MSG_ONCE // Show the message for MSG_TIME then clear it //#define LCD_PROGRESS_BAR_TEST // Add a menu item to test the progress bar #endif @@ -1301,7 +1303,7 @@ //#define BROWSE_MEDIA_ON_INSERT // Open the file browser when media is inserted - #define EVENT_GCODE_SD_ABORT "G28XY" // G-code to run on SD Abort Print (e.g., "G28XY" or "G27") + #define EVENT_GCODE_SD_ABORT "G27" // G-code to run on SD Abort Print (e.g., "G28XY" or "G27") #if ENABLED(PRINTER_EVENT_LEDS) #define PE_LEDS_COMPLETED_TIME (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination @@ -1315,14 +1317,14 @@ * an option on the LCD screen to continue the print from the last-known * point in the file. */ - //#define POWER_LOSS_RECOVERY + #define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) //#define BACKUP_POWER_SUPPLY // Backup power / UPS to move the steppers on power loss //#define POWER_LOSS_ZRAISE 2 // (mm) Z axis raise on resume (on power loss with UPS) - //#define POWER_LOSS_PIN 44 // Pin to detect power loss. Set to -1 to disable default pin on boards without module. - //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss - //#define POWER_LOSS_PULLUP // Set pullup / pulldown as appropriate for your sensor + #define POWER_LOSS_PIN 69 // Pin to detect power loss. Set to -1 to disable default pin on boards without module. + #define POWER_LOSS_STATE LOW // State of pin indicating power loss + #define POWER_LOSS_PULLUP // Set pullup / pulldown as appropriate for your sensor //#define POWER_LOSS_PULLDOWN //#define POWER_LOSS_PURGE_LEN 20 // (mm) Length of filament to purge on resume //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power. @@ -1361,15 +1363,15 @@ * - SDSORT_CACHE_NAMES will retain the sorted file listing in RAM. (Expensive!) * - SDSORT_DYNAMIC_RAM only uses RAM when the SD menu is visible. (Use with caution!) */ - //#define SDCARD_SORT_ALPHA + #define SDCARD_SORT_ALPHA // SD Card Sorting options #if ENABLED(SDCARD_SORT_ALPHA) #define SDSORT_LIMIT 40 // Maximum number of sorted items (10-256). Costs 27 bytes each. #define FOLDER_SORTING -1 // -1=above 0=none 1=below #define SDSORT_GCODE false // Allow turning sorting on/off with LCD and M34 G-code. - #define SDSORT_USES_RAM false // Pre-allocate a static array for faster pre-sorting. - #define SDSORT_USES_STACK false // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.) + #define SDSORT_USES_RAM true // Pre-allocate a static array for faster pre-sorting. + #define SDSORT_USES_STACK true // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.) #define SDSORT_CACHE_NAMES false // Keep sorted items in RAM longer for speedy performance. Most expensive option. #define SDSORT_DYNAMIC_RAM false // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use! #define SDSORT_CACHE_VFATS 2 // Maximum number of 13-byte VFAT entries to use for sorting. @@ -1384,7 +1386,7 @@ //#define LONG_FILENAME_HOST_SUPPORT // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES + #define SCROLL_LONG_FILENAMES // Leave the heaters on after Stop Print (not recommended!) //#define SD_ABORT_NO_COOLDOWN @@ -1512,14 +1514,14 @@ */ #if HAS_MARLINUI_U8GLIB // Show SD percentage next to the progress bar - //#define DOGM_SD_PERCENT + #define DOGM_SD_PERCENT // Save many cycles by drawing a hollow frame or no frame on the Info Screen //#define XYZ_NO_FRAME #define XYZ_HOLLOW_FRAME // Enable to save many cycles by drawing a hollow frame on Menu Screens - #define MENU_HOLLOW_FRAME + //#define MENU_HOLLOW_FRAME // A bigger font is available for edit items. Costs 3120 bytes of PROGMEM. // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. @@ -1569,16 +1571,16 @@ //#define STATUS_CUTTER_ANIM // Use a second bitmap to indicate spindle / laser active //#define STATUS_COOLER_ANIM // Use a second bitmap to indicate laser cooling //#define STATUS_FLOWMETER_ANIM // Use multiple bitmaps to indicate coolant flow - //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap - //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap - //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames - //#define STATUS_HEAT_PERCENT // Show heating in a progress bar - //#define BOOT_MARLIN_LOGO_ANIMATED // Animated Marlin logo. Costs ~‭3260 (or ~940) bytes of PROGMEM. + #define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap + #define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap + #define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames + #define STATUS_HEAT_PERCENT // Show heating in a progress bar + #define BOOT_MARLIN_LOGO_ANIMATED // Animated Marlin logo. Costs ~‭3260 (or ~940) bytes of PROGMEM. // Frivolous Game Options - //#define MARLIN_BRICKOUT - //#define MARLIN_INVADERS - //#define MARLIN_SNAKE + #define MARLIN_BRICKOUT + #define MARLIN_INVADERS + #define MARLIN_SNAKE //#define GAMES_EASTER_EGG // Add extra blank lines above the "Games" sub-menu #endif // HAS_MARLINUI_U8GLIB @@ -1790,7 +1792,7 @@ * * Warning: Does not respect endstops! */ -//#define BABYSTEPPING +#define BABYSTEPPING #if ENABLED(BABYSTEPPING) //#define INTEGRATED_BABYSTEPPING // EXPERIMENTAL integration of babystepping into the Stepper ISR //#define BABYSTEP_WITHOUT_HOMING @@ -1801,17 +1803,17 @@ #define BABYSTEP_MULTIPLICATOR_Z 1 // (steps or mm) Steps or millimeter distance for each Z babystep #define BABYSTEP_MULTIPLICATOR_XY 1 // (steps or mm) Steps or millimeter distance for each XY babystep - //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. + #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on doubleclick when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) - #define MOVE_Z_IDLE_MULTIPLICATOR 1 // Multiply 1mm by this factor for the move step size. + #define MOVE_Z_IDLE_MULTIPLICATOR 5 // Multiply 1mm by this factor for the move step size. #endif #endif - //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 + #define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping #if ENABLED(BABYSTEP_ZPROBE_OFFSET) @@ -1837,12 +1839,12 @@ * * See https://marlinfw.org/docs/features/lin_advance.html for full instructions. */ -//#define LIN_ADVANCE +#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) //#define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants - #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed + #define LIN_ADVANCE_K 0 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // If enabled, this will generate debug information output over USB. - //#define EXPERIMENTAL_SCURVE // Enable this option to permit S-Curve Acceleration + #define EXPERIMENTAL_SCURVE // Enable this option to permit S-Curve Acceleration #endif // @section leveling @@ -2311,19 +2313,19 @@ * * Enable PARK_HEAD_ON_PAUSE to add the G-code M125 Pause and Park. */ -//#define ADVANCED_PAUSE_FEATURE +#define ADVANCED_PAUSE_FEATURE #if ENABLED(ADVANCED_PAUSE_FEATURE) #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. // This short retract is done immediately, before parking the nozzle. #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast. #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload. + #define FILAMENT_CHANGE_UNLOAD_LENGTH 400 // (mm) The length of filament for a complete unload. // For Bowden, the full length of the tube and nozzle. // For direct drive, the full length of the nozzle. // Set to 0 for manual unloading. #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE 6 // (mm/s) Slow move when starting load. - #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 0 // (mm) Slow length, to allow time to insert material. + #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 400 // (mm) Slow length, to allow time to insert material. // 0 to disable start loading and skip to fast load only #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast. #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. diff --git a/config/examples/Geeetech/A20M/Configuration.h b/config/examples/Geeetech/A20M/Configuration.h index 78c2dc9160..7a9940582d 100644 --- a/config/examples/Geeetech/A20M/Configuration.h +++ b/config/examples/Geeetech/A20M/Configuration.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Geeetech/A20M" + /** * Configuration.h * @@ -127,18 +129,18 @@ * * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ -#define BAUDRATE 250000 +#define BAUDRATE 115200 // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH // Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_RAMPS_14_EFB + #define MOTHERBOARD BOARD_GT2560_V3_A20 #endif // Name displayed in the LCD "Ready" message and Info menu -//#define CUSTOM_MACHINE_NAME "3D Printer" +#define CUSTOM_MACHINE_NAME "Geeetech A20M" // Printer's unique ID, used by some programs to differentiate between machines. // Choose your own or use a service like https://www.uuidgenerator.net/version4 @@ -292,14 +294,14 @@ * - This implementation supports up to two mixing extruders. * - Enable DIRECT_MIXING_IN_G1 for M165 and mixing in G1 (from Pia Taubert's reference implementation). */ -//#define MIXING_EXTRUDER +#define MIXING_EXTRUDER #if ENABLED(MIXING_EXTRUDER) #define MIXING_STEPPERS 2 // Number of steppers in your mixing extruder #define MIXING_VIRTUAL_TOOLS 16 // Use the Virtual Tool method with M163 and M164 //#define DIRECT_MIXING_IN_G1 // Allow ABCDHI mix factors in G1 movement commands - //#define GRADIENT_MIX // Support for gradient mixing with M166 and LCD + #define GRADIENT_MIX // Support for gradient mixing with M166 and LCD #if ENABLED(GRADIENT_MIX) - //#define GRADIENT_VTOOL // Add M166 T to use a V-tool index as a Gradient alias + #define GRADIENT_VTOOL // Add M166 T to use a V-tool index as a Gradient alias #endif #endif @@ -424,7 +426,7 @@ #define TEMP_SENSOR_5 0 #define TEMP_SENSOR_6 0 #define TEMP_SENSOR_7 0 -#define TEMP_SENSOR_BED 0 +#define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 #define TEMP_SENSOR_COOLER 0 @@ -506,20 +508,21 @@ #if ENABLED(PIDTEMP) //#define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) - //#define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) + #define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) // Set/get with gcode: M301 E[extruder number, 0-2] + // A20M [@thinkyhead] #if ENABLED(PID_PARAMS_PER_HOTEND) // Specify between 1 and HOTENDS values per array. // If fewer than EXTRUDER values are provided, the last element will be repeated. - #define DEFAULT_Kp_LIST { 22.20, 22.20 } - #define DEFAULT_Ki_LIST { 1.08, 1.08 } - #define DEFAULT_Kd_LIST { 114.00, 114.00 } + #define DEFAULT_Kp_LIST { 45.80, 45.80 } + #define DEFAULT_Ki_LIST { 3.61, 3.61 } + #define DEFAULT_Kd_LIST { 145.39, 145.39 } #else - #define DEFAULT_Kp 22.20 - #define DEFAULT_Ki 1.08 - #define DEFAULT_Kd 114.00 + #define DEFAULT_Kp 45.80 + #define DEFAULT_Ki 3.61 + #define DEFAULT_Kd 145.39 #endif #endif // PIDTEMP @@ -540,7 +543,7 @@ * heater. If your configuration is significantly different than this and you don't understand * the issues involved, don't use bed PID until someone else verifies that your hardware works. */ -//#define PIDTEMPBED +#define PIDTEMPBED //#define BED_LIMIT_SWITCHING @@ -556,11 +559,10 @@ //#define MIN_BED_POWER 0 //#define PID_BED_DEBUG // Sends debug data to the serial port. - // 120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - // from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) - #define DEFAULT_bedKp 10.00 - #define DEFAULT_bedKi .023 - #define DEFAULT_bedKd 305.4 + // MeCreator2 generated by Autotune + #define DEFAULT_bedKp 182.46 // 175.68 189.95 + #define DEFAULT_bedKi 35.92 // 34.59 37.40 + #define DEFAULT_bedKd 231.70 // 223.07 241.19 // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. #endif // PIDTEMPBED @@ -634,7 +636,7 @@ * Note: For Bowden Extruders make this large enough to allow load/unload. */ #define PREVENT_LENGTHY_EXTRUDE -#define EXTRUDE_MAXLENGTH 200 +#define EXTRUDE_MAXLENGTH 400 //=========================================================================== //======================== Thermal Runaway Protection ======================= @@ -717,13 +719,13 @@ #endif // Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define X_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_PROBE_ENDSTOP_INVERTING false // Set to true to invert the logic of the probe. +#define X_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Y_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Z_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define X_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Y_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Z_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Z_MIN_PROBE_ENDSTOP_INVERTING true // Set to true to invert the logic of the probe. /** * Stepper Drivers @@ -806,14 +808,14 @@ * Override with M92 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 500 } +#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 430 } /** * Default Max Feed Rate (mm/s) * Override with M203 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 } +#define DEFAULT_MAX_FEEDRATE { 500, 500, 5, 25 } //#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 #if ENABLED(LIMITED_MAX_FR_EDITING) @@ -826,7 +828,7 @@ * Override with M201 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 } +#define DEFAULT_MAX_ACCELERATION { 500, 500, 100, 5000 } //#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 #if ENABLED(LIMITED_MAX_ACCEL_EDITING) @@ -841,9 +843,9 @@ * M204 R Retract Acceleration * M204 T Travel Acceleration */ -#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves +#define DEFAULT_ACCELERATION 1000 // X, Y, Z and E acceleration for printing moves +#define DEFAULT_RETRACT_ACCELERATION 2000 // E acceleration for retracts +#define DEFAULT_TRAVEL_ACCELERATION 1000 // X, Y, Z acceleration for travel (non printing) moves /** * Default Jerk limits (mm/s) @@ -857,7 +859,7 @@ #if ENABLED(CLASSIC_JERK) #define DEFAULT_XJERK 10.0 #define DEFAULT_YJERK 10.0 - #define DEFAULT_ZJERK 0.3 + #define DEFAULT_ZJERK 0.4 //#define TRAVEL_EXTRA_XYJERK 0.0 // Additional jerk allowance for all travel moves @@ -877,7 +879,7 @@ * https://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html */ #if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.013 // (mm) Distance from real junction edge + #define JUNCTION_DEVIATION_MM 0.04 // (mm) Distance from real junction edge #define JD_HANDLE_SMALL_SEGMENTS // Use curvature estimation instead of just the junction angle // for small segments (< 1mm) with large junction angles (> 135°). #endif @@ -890,7 +892,7 @@ * * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained */ -//#define S_CURVE_ACCELERATION +#define S_CURVE_ACCELERATION //=========================================================================== //============================= Z Probe Options ============================= @@ -940,7 +942,7 @@ * Use G29 repeatedly, adjusting the Z height at each point with movement commands * or (with LCD_BED_LEVELING) the LCD controller. */ -//#define PROBE_MANUALLY +#define PROBE_MANUALLY /** * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. @@ -1055,7 +1057,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +#define NOZZLE_TO_PROBE_OFFSET { -37, 0, -3.6 } // Most probes should stay away from the edges of the bed, but // with NOZZLE_AS_PROBE this can be negative for a wider probing area. @@ -1065,7 +1067,7 @@ #define XY_PROBE_FEEDRATE (133*60) // Feedrate (mm/min) for the first approach when double-probing (MULTIPLE_PROBING == 2) -#define Z_PROBE_FEEDRATE_FAST (4*60) +#define Z_PROBE_FEEDRATE_FAST (20*60) // Feedrate (mm/min) for the "accurate" probe of each point #define Z_PROBE_FEEDRATE_SLOW (Z_PROBE_FEEDRATE_FAST / 2) @@ -1106,7 +1108,7 @@ * A total of 2 does fast/slow probes with a weighted average. * A total of 3 or more adds more slow probes, taking the average. */ -//#define MULTIPLE_PROBING 2 +#define MULTIPLE_PROBING 2 //#define EXTRA_PROBING 1 /** @@ -1123,16 +1125,16 @@ * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. */ -#define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow -#define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points -#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes -//#define Z_AFTER_PROBING 5 // Z position after probing is done +#define Z_CLEARANCE_DEPLOY_PROBE 5 // Z Clearance for Deploy/Stow +#define Z_CLEARANCE_BETWEEN_PROBES 3 // Z Clearance between probe points +#define Z_CLEARANCE_MULTI_PROBE 2 // Z Clearance between multiple probes +#define Z_AFTER_PROBING 3 // Z position after probing is done #define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping // For M851 give a range for adjusting the Z probe offset -#define Z_PROBE_OFFSET_RANGE_MIN -20 -#define Z_PROBE_OFFSET_RANGE_MAX 20 +#define Z_PROBE_OFFSET_RANGE_MIN -5 +#define Z_PROBE_OFFSET_RANGE_MAX 0 // Enable the M48 repeatability test to test probe accuracy //#define Z_MIN_PROBE_REPEATABILITY_TEST @@ -1150,14 +1152,14 @@ * These options are most useful for the BLTouch probe, but may also improve * readings with inductive probes and piezo sensors. */ -//#define PROBING_HEATERS_OFF // Turn heaters off when probing +#define PROBING_HEATERS_OFF // Turn heaters off when probing #if ENABLED(PROBING_HEATERS_OFF) //#define WAIT_FOR_BED_HEATER // Wait for bed to heat back up between probes (to improve accuracy) //#define WAIT_FOR_HOTEND // Wait for hotend to heat back up between probes (to improve accuracy & prevent cold extrude) #endif -//#define PROBING_FANS_OFF // Turn fans off when probing +#define PROBING_FANS_OFF // Turn fans off when probing //#define PROBING_STEPPERS_OFF // Turn steppers off (unless needed to hold position) when probing -//#define DELAY_BEFORE_PROBING 200 // (ms) To prevent vibrations from triggering piezo sensors +#define DELAY_BEFORE_PROBING 100 // (ms) To prevent vibrations from triggering piezo sensors // Require minimum nozzle and/or bed temperature for probing //#define PREHEAT_BEFORE_PROBING @@ -1190,7 +1192,7 @@ // @section machine // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR false +#define INVERT_X_DIR true #define INVERT_Y_DIR true #define INVERT_Z_DIR false @@ -1232,16 +1234,16 @@ // @section machine // The size of the printable area -#define X_BED_SIZE 200 -#define Y_BED_SIZE 200 +#define X_BED_SIZE 255 +#define Y_BED_SIZE 255 // Travel limits (mm) after homing, corresponding to endstop positions. -#define X_MIN_POS 0 -#define Y_MIN_POS 0 +#define X_MIN_POS -10 +#define Y_MIN_POS -5 #define Z_MIN_POS 0 #define X_MAX_POS X_BED_SIZE #define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 200 +#define Z_MAX_POS 250 /** * Software Endstops @@ -1285,12 +1287,14 @@ * RAMPS-based boards use SERVO3_PIN for the first runout sensor. * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. */ -//#define FILAMENT_RUNOUT_SENSOR +#define FILAMENT_RUNOUT_SENSOR #if ENABLED(FILAMENT_RUNOUT_SENSOR) #define FIL_RUNOUT_ENABLED_DEFAULT true // Enable the sensor on startup. Override with M412 followed by M500. - #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. + #define NUM_RUNOUT_SENSORS 2 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. + #define FIL_RUNOUT_PIN 66 + #define FIL_RUNOUT2_PIN 67 - #define FIL_RUNOUT_STATE LOW // Pin state indicating that filament is NOT present. + #define FIL_RUNOUT_STATE HIGH // Pin state indicating that filament is NOT present. #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. //#define WATCH_ALL_RUNOUT_SENSORS // Execute runout script on any triggering sensor, not only for the active extruder. @@ -1387,7 +1391,7 @@ */ //#define AUTO_BED_LEVELING_3POINT //#define AUTO_BED_LEVELING_LINEAR -//#define AUTO_BED_LEVELING_BILINEAR +#define AUTO_BED_LEVELING_BILINEAR //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING @@ -1438,7 +1442,7 @@ /** * Enable the G26 Mesh Validation Pattern tool. */ - //#define G26_MESH_VALIDATION + #define G26_MESH_VALIDATION #if ENABLED(G26_MESH_VALIDATION) #define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle. #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for G26. @@ -1454,7 +1458,7 @@ #if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR) // Set the number of grid points per dimension. - #define GRID_MAX_POINTS_X 3 + #define GRID_MAX_POINTS_X 5 #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X // Probe along the Y axis, advancing X after each column @@ -1518,16 +1522,16 @@ * Add a bed leveling sub-menu for ABL or MBL. * Include a guided procedure if manual probing is enabled. */ -//#define LCD_BED_LEVELING +#define LCD_BED_LEVELING #if ENABLED(LCD_BED_LEVELING) #define MESH_EDIT_Z_STEP 0.025 // (mm) Step size while manually probing Z axis. #define LCD_PROBE_Z_RANGE 4 // (mm) Z Range centered on Z_MIN_POS for LCD Z adjustment - //#define MESH_EDIT_MENU // Add a menu to edit mesh points + #define MESH_EDIT_MENU // Add a menu to edit mesh points #endif // Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS +#define LEVEL_BED_CORNERS #if ENABLED(LEVEL_BED_CORNERS) #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets @@ -1565,7 +1569,7 @@ * Commands to execute at the end of G29 probing. * Useful to retract or move the Z probe out of the way. */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" +#define Z_PROBE_END_SCRIPT "G1 Z5 F6000\nG1 X10 Y10\nG1 Z0.2" // @section homing @@ -1595,7 +1599,7 @@ #endif // Homing speeds (mm/min) -#define HOMING_FEEDRATE_MM_M { (50*60), (50*60), (4*60) } +#define HOMING_FEEDRATE_MM_M { (80*60), (80*60), (20*60) } // Validate that endstops are triggered on homing moves #define VALIDATE_HOMING_ENDSTOPS @@ -1672,7 +1676,7 @@ * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) */ -//#define EEPROM_SETTINGS // Persistent storage with M500 and M501 +#define EEPROM_SETTINGS // Persistent storage with M500 and M501 //#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. #define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load @@ -1706,14 +1710,14 @@ // Preheat Constants - Up to 5 are supported without changes // #define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 180 -#define PREHEAT_1_TEMP_BED 70 +#define PREHEAT_1_TEMP_HOTEND 190 +#define PREHEAT_1_TEMP_BED 60 #define PREHEAT_1_TEMP_CHAMBER 35 #define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 #define PREHEAT_2_LABEL "ABS" #define PREHEAT_2_TEMP_HOTEND 240 -#define PREHEAT_2_TEMP_BED 110 +#define PREHEAT_2_TEMP_BED 90 #define PREHEAT_2_TEMP_CHAMBER 35 #define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 @@ -1728,11 +1732,11 @@ * P1 Raise the nozzle always to Z-park height. * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. */ -//#define NOZZLE_PARK_FEATURE +#define NOZZLE_PARK_FEATURE #if ENABLED(NOZZLE_PARK_FEATURE) // Specify a park position as { X, Y, Z_raise } - #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 } + #define NOZZLE_PARK_POINT { X_MIN_POS, Y_MIN_POS, 6 } //#define NOZZLE_PARK_X_ONLY // X move only is required to park //#define NOZZLE_PARK_Y_ONLY // Y move only is required to park #define NOZZLE_PARK_Z_RAISE_MIN 2 // (mm) Always raise Z by at least this distance @@ -1936,7 +1940,7 @@ * SD Card support is disabled by default. If your controller has an SD slot, * you must uncomment the following option or it won't work. */ -//#define SDSUPPORT +#define SDSUPPORT /** * SD CARD: ENABLE CRC @@ -1960,7 +1964,7 @@ // This option overrides the default number of encoder pulses needed to // produce one step. Should be increased for high-resolution encoders. // -//#define ENCODER_PULSES_PER_STEP 4 +#define ENCODER_PULSES_PER_STEP 2 // // Use this option to override the number of step signals required to @@ -2014,7 +2018,7 @@ // If you have a speaker that can produce tones, enable it here. // By default Marlin assumes you have a buzzer with a fixed frequency. // -//#define SPEAKER +#define SPEAKER // // The duration and frequency for the UI feedback sound. @@ -2195,7 +2199,10 @@ // RepRapDiscount FULL GRAPHIC Smart Controller // https://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller // -//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER +#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER +#define ST7920_DELAY_1 DELAY_NS(125) +#define ST7920_DELAY_2 DELAY_NS(125) +#define ST7920_DELAY_3 DELAY_NS(125) // // K.3D Full Graphic Smart Controller diff --git a/config/examples/Geeetech/A20M/Configuration_adv.h b/config/examples/Geeetech/A20M/Configuration_adv.h index 5335fa012a..a94cf102f2 100644 --- a/config/examples/Geeetech/A20M/Configuration_adv.h +++ b/config/examples/Geeetech/A20M/Configuration_adv.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Geeetech/A20M" + /** * Configuration_adv.h * @@ -741,7 +743,7 @@ //#define HOMING_BACKOFF_POST_MM { 2, 2, 2 } // (mm) Backoff from endstops after homing -//#define QUICK_HOME // If G28 contains XY do a diagonal move first +#define QUICK_HOME // If G28 contains XY do a diagonal move first //#define HOME_Y_BEFORE_X // If G28 contains XY home Y before X //#define HOME_Z_FIRST // Home Z first. Requires a Z-MIN endstop (not a probe). //#define CODEPENDENT_XY_HOMING // If X/Y can't home without homing Y/X first @@ -766,7 +768,7 @@ // Safety: The probe needs time to recognize the command. // Minimum command delay (ms). Enable and increase if needed. - //#define BLTOUCH_DELAY 500 + #define BLTOUCH_DELAY 200 /** * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones: @@ -808,7 +810,7 @@ * This feature was designed for Deltabots with very fast Z moves; however, higher speed Cartesians * might be able to use it. If the machine can't raise Z fast enough the BLTouch may go into ALARM. */ - //#define BLTOUCH_HS_MODE + #define BLTOUCH_HS_MODE // Safety: Enable voltage mode settings in the LCD menu. //#define BLTOUCH_LCD_VOLTAGE_MENU @@ -867,7 +869,7 @@ // On a 300mm bed a 5% grade would give a misalignment of ~1.5cm #define G34_MAX_GRADE 5 // (%) Maximum incline that G34 will handle - #define Z_STEPPER_ALIGN_ITERATIONS 5 // Number of iterations to apply during alignment + #define Z_STEPPER_ALIGN_ITERATIONS 3 // Number of iterations to apply during alignment #define Z_STEPPER_ALIGN_ACC 0.02 // Stop iterating early if the accuracy is better than this #define RESTORE_LEVELING_AFTER_G34 // Restore leveling after G34 is done? // After G34, re-home Z (G28 Z) or just calculate it from the last probe heights? @@ -1145,8 +1147,8 @@ // Change values more rapidly when the encoder is rotated faster #define ENCODER_RATE_MULTIPLIER #if ENABLED(ENCODER_RATE_MULTIPLIER) - #define ENCODER_10X_STEPS_PER_SEC 30 // (steps/s) Encoder rate for 10x speed - #define ENCODER_100X_STEPS_PER_SEC 80 // (steps/s) Encoder rate for 100x speed + #define ENCODER_10X_STEPS_PER_SEC 10 // (steps/s) Encoder rate for 10x speed + #define ENCODER_100X_STEPS_PER_SEC 50 // (steps/s) Encoder rate for 100x speed #endif // Play a beep when the feedrate is changed from the Status Screen @@ -1175,7 +1177,7 @@ #endif // Include a page of printer information in the LCD Main Menu - //#define LCD_INFO_MENU + #define LCD_INFO_MENU #if ENABLED(LCD_INFO_MENU) //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages #endif @@ -1229,7 +1231,7 @@ #endif // Scroll a longer status message into view - //#define STATUS_MESSAGE_SCROLLING + #define STATUS_MESSAGE_SCROLLING // On the Info Screen, display XY with one decimal place when possible //#define LCD_DECIMAL_SMALL_XY @@ -1253,11 +1255,11 @@ #endif #if EITHER(HAS_MARLINUI_HD44780, IS_TFTGLCD_PANEL) - //#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing + #define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing #if ENABLED(LCD_PROGRESS_BAR) #define PROGRESS_BAR_BAR_TIME 2000 // (ms) Amount of time to show the bar - #define PROGRESS_BAR_MSG_TIME 3000 // (ms) Amount of time to show the status message - #define PROGRESS_MSG_EXPIRE 0 // (ms) Amount of time to retain the status message (0=forever) + #define PROGRESS_BAR_MSG_TIME 3500 // (ms) Amount of time to show the status message + #define PROGRESS_MSG_EXPIRE 180000 // (ms) Amount of time to retain the status message (0=forever) //#define PROGRESS_MSG_ONCE // Show the message for MSG_TIME then clear it //#define LCD_PROGRESS_BAR_TEST // Add a menu item to test the progress bar #endif @@ -1301,7 +1303,7 @@ //#define BROWSE_MEDIA_ON_INSERT // Open the file browser when media is inserted - #define EVENT_GCODE_SD_ABORT "G28XY" // G-code to run on SD Abort Print (e.g., "G28XY" or "G27") + #define EVENT_GCODE_SD_ABORT "G27" // G-code to run on SD Abort Print (e.g., "G28XY" or "G27") #if ENABLED(PRINTER_EVENT_LEDS) #define PE_LEDS_COMPLETED_TIME (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination @@ -1315,14 +1317,14 @@ * an option on the LCD screen to continue the print from the last-known * point in the file. */ - //#define POWER_LOSS_RECOVERY + #define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) //#define BACKUP_POWER_SUPPLY // Backup power / UPS to move the steppers on power loss //#define POWER_LOSS_ZRAISE 2 // (mm) Z axis raise on resume (on power loss with UPS) - //#define POWER_LOSS_PIN 44 // Pin to detect power loss. Set to -1 to disable default pin on boards without module. - //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss - //#define POWER_LOSS_PULLUP // Set pullup / pulldown as appropriate for your sensor + #define POWER_LOSS_PIN 69 // Pin to detect power loss. Set to -1 to disable default pin on boards without module. + #define POWER_LOSS_STATE LOW // State of pin indicating power loss + #define POWER_LOSS_PULLUP // Set pullup / pulldown as appropriate for your sensor //#define POWER_LOSS_PULLDOWN //#define POWER_LOSS_PURGE_LEN 20 // (mm) Length of filament to purge on resume //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power. @@ -1361,15 +1363,15 @@ * - SDSORT_CACHE_NAMES will retain the sorted file listing in RAM. (Expensive!) * - SDSORT_DYNAMIC_RAM only uses RAM when the SD menu is visible. (Use with caution!) */ - //#define SDCARD_SORT_ALPHA + #define SDCARD_SORT_ALPHA // SD Card Sorting options #if ENABLED(SDCARD_SORT_ALPHA) #define SDSORT_LIMIT 40 // Maximum number of sorted items (10-256). Costs 27 bytes each. #define FOLDER_SORTING -1 // -1=above 0=none 1=below #define SDSORT_GCODE false // Allow turning sorting on/off with LCD and M34 G-code. - #define SDSORT_USES_RAM false // Pre-allocate a static array for faster pre-sorting. - #define SDSORT_USES_STACK false // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.) + #define SDSORT_USES_RAM true // Pre-allocate a static array for faster pre-sorting. + #define SDSORT_USES_STACK true // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.) #define SDSORT_CACHE_NAMES false // Keep sorted items in RAM longer for speedy performance. Most expensive option. #define SDSORT_DYNAMIC_RAM false // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use! #define SDSORT_CACHE_VFATS 2 // Maximum number of 13-byte VFAT entries to use for sorting. @@ -1384,7 +1386,7 @@ //#define LONG_FILENAME_HOST_SUPPORT // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES + #define SCROLL_LONG_FILENAMES // Leave the heaters on after Stop Print (not recommended!) //#define SD_ABORT_NO_COOLDOWN @@ -1512,14 +1514,14 @@ */ #if HAS_MARLINUI_U8GLIB // Show SD percentage next to the progress bar - //#define DOGM_SD_PERCENT + #define DOGM_SD_PERCENT // Save many cycles by drawing a hollow frame or no frame on the Info Screen //#define XYZ_NO_FRAME #define XYZ_HOLLOW_FRAME // Enable to save many cycles by drawing a hollow frame on Menu Screens - #define MENU_HOLLOW_FRAME + //#define MENU_HOLLOW_FRAME // A bigger font is available for edit items. Costs 3120 bytes of PROGMEM. // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. @@ -1569,16 +1571,16 @@ //#define STATUS_CUTTER_ANIM // Use a second bitmap to indicate spindle / laser active //#define STATUS_COOLER_ANIM // Use a second bitmap to indicate laser cooling //#define STATUS_FLOWMETER_ANIM // Use multiple bitmaps to indicate coolant flow - //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap - //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap - //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames - //#define STATUS_HEAT_PERCENT // Show heating in a progress bar - //#define BOOT_MARLIN_LOGO_ANIMATED // Animated Marlin logo. Costs ~‭3260 (or ~940) bytes of PROGMEM. + #define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap + #define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap + #define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames + #define STATUS_HEAT_PERCENT // Show heating in a progress bar + #define BOOT_MARLIN_LOGO_ANIMATED // Animated Marlin logo. Costs ~‭3260 (or ~940) bytes of PROGMEM. // Frivolous Game Options - //#define MARLIN_BRICKOUT - //#define MARLIN_INVADERS - //#define MARLIN_SNAKE + #define MARLIN_BRICKOUT + #define MARLIN_INVADERS + #define MARLIN_SNAKE //#define GAMES_EASTER_EGG // Add extra blank lines above the "Games" sub-menu #endif // HAS_MARLINUI_U8GLIB @@ -1790,7 +1792,7 @@ * * Warning: Does not respect endstops! */ -//#define BABYSTEPPING +#define BABYSTEPPING #if ENABLED(BABYSTEPPING) //#define INTEGRATED_BABYSTEPPING // EXPERIMENTAL integration of babystepping into the Stepper ISR //#define BABYSTEP_WITHOUT_HOMING @@ -1801,17 +1803,17 @@ #define BABYSTEP_MULTIPLICATOR_Z 1 // (steps or mm) Steps or millimeter distance for each Z babystep #define BABYSTEP_MULTIPLICATOR_XY 1 // (steps or mm) Steps or millimeter distance for each XY babystep - //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. + #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on doubleclick when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) - #define MOVE_Z_IDLE_MULTIPLICATOR 1 // Multiply 1mm by this factor for the move step size. + #define MOVE_Z_IDLE_MULTIPLICATOR 5 // Multiply 1mm by this factor for the move step size. #endif #endif - //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 + #define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping #if ENABLED(BABYSTEP_ZPROBE_OFFSET) @@ -1837,12 +1839,12 @@ * * See https://marlinfw.org/docs/features/lin_advance.html for full instructions. */ -//#define LIN_ADVANCE +#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) //#define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants - #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed + #define LIN_ADVANCE_K 0 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // If enabled, this will generate debug information output over USB. - //#define EXPERIMENTAL_SCURVE // Enable this option to permit S-Curve Acceleration + #define EXPERIMENTAL_SCURVE // Enable this option to permit S-Curve Acceleration #endif // @section leveling @@ -2311,19 +2313,19 @@ * * Enable PARK_HEAD_ON_PAUSE to add the G-code M125 Pause and Park. */ -//#define ADVANCED_PAUSE_FEATURE +#define ADVANCED_PAUSE_FEATURE #if ENABLED(ADVANCED_PAUSE_FEATURE) #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. // This short retract is done immediately, before parking the nozzle. #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast. #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload. + #define FILAMENT_CHANGE_UNLOAD_LENGTH 400 // (mm) The length of filament for a complete unload. // For Bowden, the full length of the tube and nozzle. // For direct drive, the full length of the nozzle. // Set to 0 for manual unloading. #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE 6 // (mm/s) Slow move when starting load. - #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 0 // (mm) Slow length, to allow time to insert material. + #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 400 // (mm) Slow length, to allow time to insert material. // 0 to disable start loading and skip to fast load only #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast. #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. diff --git a/config/examples/Geeetech/A20T/Configuration.h b/config/examples/Geeetech/A20T/Configuration.h index 78c2dc9160..45b2eb1992 100644 --- a/config/examples/Geeetech/A20T/Configuration.h +++ b/config/examples/Geeetech/A20T/Configuration.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Geeetech/A20T" + /** * Configuration.h * @@ -127,18 +129,18 @@ * * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ -#define BAUDRATE 250000 +#define BAUDRATE 115200 // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH // Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_RAMPS_14_EFB + #define MOTHERBOARD BOARD_GT2560_V3_A20 #endif // Name displayed in the LCD "Ready" message and Info menu -//#define CUSTOM_MACHINE_NAME "3D Printer" +#define CUSTOM_MACHINE_NAME "Geeetech A20T" // Printer's unique ID, used by some programs to differentiate between machines. // Choose your own or use a service like https://www.uuidgenerator.net/version4 @@ -292,14 +294,14 @@ * - This implementation supports up to two mixing extruders. * - Enable DIRECT_MIXING_IN_G1 for M165 and mixing in G1 (from Pia Taubert's reference implementation). */ -//#define MIXING_EXTRUDER +#define MIXING_EXTRUDER #if ENABLED(MIXING_EXTRUDER) - #define MIXING_STEPPERS 2 // Number of steppers in your mixing extruder + #define MIXING_STEPPERS 3 // Number of steppers in your mixing extruder #define MIXING_VIRTUAL_TOOLS 16 // Use the Virtual Tool method with M163 and M164 //#define DIRECT_MIXING_IN_G1 // Allow ABCDHI mix factors in G1 movement commands - //#define GRADIENT_MIX // Support for gradient mixing with M166 and LCD + #define GRADIENT_MIX // Support for gradient mixing with M166 and LCD #if ENABLED(GRADIENT_MIX) - //#define GRADIENT_VTOOL // Add M166 T to use a V-tool index as a Gradient alias + #define GRADIENT_VTOOL // Add M166 T to use a V-tool index as a Gradient alias #endif #endif @@ -424,7 +426,7 @@ #define TEMP_SENSOR_5 0 #define TEMP_SENSOR_6 0 #define TEMP_SENSOR_7 0 -#define TEMP_SENSOR_BED 0 +#define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 #define TEMP_SENSOR_COOLER 0 @@ -506,20 +508,21 @@ #if ENABLED(PIDTEMP) //#define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) - //#define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) + #define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) // Set/get with gcode: M301 E[extruder number, 0-2] + // A20M [@thinkyhead] #if ENABLED(PID_PARAMS_PER_HOTEND) // Specify between 1 and HOTENDS values per array. // If fewer than EXTRUDER values are provided, the last element will be repeated. - #define DEFAULT_Kp_LIST { 22.20, 22.20 } - #define DEFAULT_Ki_LIST { 1.08, 1.08 } - #define DEFAULT_Kd_LIST { 114.00, 114.00 } + #define DEFAULT_Kp_LIST { 45.80, 45.80 } + #define DEFAULT_Ki_LIST { 3.61, 3.61 } + #define DEFAULT_Kd_LIST { 145.39, 145.39 } #else - #define DEFAULT_Kp 22.20 - #define DEFAULT_Ki 1.08 - #define DEFAULT_Kd 114.00 + #define DEFAULT_Kp 45.80 + #define DEFAULT_Ki 3.61 + #define DEFAULT_Kd 145.39 #endif #endif // PIDTEMP @@ -540,7 +543,7 @@ * heater. If your configuration is significantly different than this and you don't understand * the issues involved, don't use bed PID until someone else verifies that your hardware works. */ -//#define PIDTEMPBED +#define PIDTEMPBED //#define BED_LIMIT_SWITCHING @@ -556,11 +559,10 @@ //#define MIN_BED_POWER 0 //#define PID_BED_DEBUG // Sends debug data to the serial port. - // 120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - // from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) - #define DEFAULT_bedKp 10.00 - #define DEFAULT_bedKi .023 - #define DEFAULT_bedKd 305.4 + // MeCreator2 generated by Autotune + #define DEFAULT_bedKp 182.46 // 175.68 189.95 + #define DEFAULT_bedKi 35.92 // 34.59 37.40 + #define DEFAULT_bedKd 231.70 // 223.07 241.19 // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. #endif // PIDTEMPBED @@ -634,7 +636,7 @@ * Note: For Bowden Extruders make this large enough to allow load/unload. */ #define PREVENT_LENGTHY_EXTRUDE -#define EXTRUDE_MAXLENGTH 200 +#define EXTRUDE_MAXLENGTH 400 //=========================================================================== //======================== Thermal Runaway Protection ======================= @@ -717,13 +719,13 @@ #endif // Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define X_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_PROBE_ENDSTOP_INVERTING false // Set to true to invert the logic of the probe. +#define X_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Y_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Z_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define X_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Y_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Z_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Z_MIN_PROBE_ENDSTOP_INVERTING true // Set to true to invert the logic of the probe. /** * Stepper Drivers @@ -806,14 +808,14 @@ * Override with M92 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 500 } +#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 430 } /** * Default Max Feed Rate (mm/s) * Override with M203 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 } +#define DEFAULT_MAX_FEEDRATE { 500, 500, 5, 25 } //#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 #if ENABLED(LIMITED_MAX_FR_EDITING) @@ -826,7 +828,7 @@ * Override with M201 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 } +#define DEFAULT_MAX_ACCELERATION { 500, 500, 100, 5000 } //#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 #if ENABLED(LIMITED_MAX_ACCEL_EDITING) @@ -841,9 +843,9 @@ * M204 R Retract Acceleration * M204 T Travel Acceleration */ -#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves +#define DEFAULT_ACCELERATION 1000 // X, Y, Z and E acceleration for printing moves +#define DEFAULT_RETRACT_ACCELERATION 2000 // E acceleration for retracts +#define DEFAULT_TRAVEL_ACCELERATION 1000 // X, Y, Z acceleration for travel (non printing) moves /** * Default Jerk limits (mm/s) @@ -857,7 +859,7 @@ #if ENABLED(CLASSIC_JERK) #define DEFAULT_XJERK 10.0 #define DEFAULT_YJERK 10.0 - #define DEFAULT_ZJERK 0.3 + #define DEFAULT_ZJERK 0.4 //#define TRAVEL_EXTRA_XYJERK 0.0 // Additional jerk allowance for all travel moves @@ -877,7 +879,7 @@ * https://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html */ #if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.013 // (mm) Distance from real junction edge + #define JUNCTION_DEVIATION_MM 0.04 // (mm) Distance from real junction edge #define JD_HANDLE_SMALL_SEGMENTS // Use curvature estimation instead of just the junction angle // for small segments (< 1mm) with large junction angles (> 135°). #endif @@ -890,7 +892,7 @@ * * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained */ -//#define S_CURVE_ACCELERATION +#define S_CURVE_ACCELERATION //=========================================================================== //============================= Z Probe Options ============================= @@ -940,7 +942,7 @@ * Use G29 repeatedly, adjusting the Z height at each point with movement commands * or (with LCD_BED_LEVELING) the LCD controller. */ -//#define PROBE_MANUALLY +#define PROBE_MANUALLY /** * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. @@ -1055,17 +1057,17 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +#define NOZZLE_TO_PROBE_OFFSET { -40, 0, 0 } // Most probes should stay away from the edges of the bed, but // with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed (mm/min) between probes -#define XY_PROBE_FEEDRATE (133*60) +#define XY_PROBE_FEEDRATE (80*60) // Feedrate (mm/min) for the first approach when double-probing (MULTIPLE_PROBING == 2) -#define Z_PROBE_FEEDRATE_FAST (4*60) +#define Z_PROBE_FEEDRATE_FAST (20*60) // Feedrate (mm/min) for the "accurate" probe of each point #define Z_PROBE_FEEDRATE_SLOW (Z_PROBE_FEEDRATE_FAST / 2) @@ -1106,7 +1108,7 @@ * A total of 2 does fast/slow probes with a weighted average. * A total of 3 or more adds more slow probes, taking the average. */ -//#define MULTIPLE_PROBING 2 +#define MULTIPLE_PROBING 2 //#define EXTRA_PROBING 1 /** @@ -1123,16 +1125,16 @@ * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. */ -#define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow -#define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points -#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes -//#define Z_AFTER_PROBING 5 // Z position after probing is done +#define Z_CLEARANCE_DEPLOY_PROBE 5 // Z Clearance for Deploy/Stow +#define Z_CLEARANCE_BETWEEN_PROBES 3 // Z Clearance between probe points +#define Z_CLEARANCE_MULTI_PROBE 2 // Z Clearance between multiple probes +#define Z_AFTER_PROBING 3 // Z position after probing is done #define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping // For M851 give a range for adjusting the Z probe offset -#define Z_PROBE_OFFSET_RANGE_MIN -20 -#define Z_PROBE_OFFSET_RANGE_MAX 20 +#define Z_PROBE_OFFSET_RANGE_MIN -5 +#define Z_PROBE_OFFSET_RANGE_MAX 0 // Enable the M48 repeatability test to test probe accuracy //#define Z_MIN_PROBE_REPEATABILITY_TEST @@ -1150,14 +1152,14 @@ * These options are most useful for the BLTouch probe, but may also improve * readings with inductive probes and piezo sensors. */ -//#define PROBING_HEATERS_OFF // Turn heaters off when probing +#define PROBING_HEATERS_OFF // Turn heaters off when probing #if ENABLED(PROBING_HEATERS_OFF) //#define WAIT_FOR_BED_HEATER // Wait for bed to heat back up between probes (to improve accuracy) //#define WAIT_FOR_HOTEND // Wait for hotend to heat back up between probes (to improve accuracy & prevent cold extrude) #endif -//#define PROBING_FANS_OFF // Turn fans off when probing +#define PROBING_FANS_OFF // Turn fans off when probing //#define PROBING_STEPPERS_OFF // Turn steppers off (unless needed to hold position) when probing -//#define DELAY_BEFORE_PROBING 200 // (ms) To prevent vibrations from triggering piezo sensors +#define DELAY_BEFORE_PROBING 100 // (ms) To prevent vibrations from triggering piezo sensors // Require minimum nozzle and/or bed temperature for probing //#define PREHEAT_BEFORE_PROBING @@ -1190,7 +1192,7 @@ // @section machine // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR false +#define INVERT_X_DIR true #define INVERT_Y_DIR true #define INVERT_Z_DIR false @@ -1232,16 +1234,16 @@ // @section machine // The size of the printable area -#define X_BED_SIZE 200 -#define Y_BED_SIZE 200 +#define X_BED_SIZE 255 +#define Y_BED_SIZE 255 // Travel limits (mm) after homing, corresponding to endstop positions. -#define X_MIN_POS 0 +#define X_MIN_POS -5 #define Y_MIN_POS 0 #define Z_MIN_POS 0 #define X_MAX_POS X_BED_SIZE #define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 200 +#define Z_MAX_POS 250 /** * Software Endstops @@ -1285,12 +1287,15 @@ * RAMPS-based boards use SERVO3_PIN for the first runout sensor. * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. */ -//#define FILAMENT_RUNOUT_SENSOR +#define FILAMENT_RUNOUT_SENSOR #if ENABLED(FILAMENT_RUNOUT_SENSOR) #define FIL_RUNOUT_ENABLED_DEFAULT true // Enable the sensor on startup. Override with M412 followed by M500. - #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. + #define NUM_RUNOUT_SENSORS 3 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. + #define FIL_RUNOUT_PIN 66 + #define FIL_RUNOUT2_PIN 67 + #define FIL_RUNOUT3_PIN 68 - #define FIL_RUNOUT_STATE LOW // Pin state indicating that filament is NOT present. + #define FIL_RUNOUT_STATE HIGH // Pin state indicating that filament is NOT present. #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. //#define WATCH_ALL_RUNOUT_SENSORS // Execute runout script on any triggering sensor, not only for the active extruder. @@ -1387,7 +1392,7 @@ */ //#define AUTO_BED_LEVELING_3POINT //#define AUTO_BED_LEVELING_LINEAR -//#define AUTO_BED_LEVELING_BILINEAR +#define AUTO_BED_LEVELING_BILINEAR //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING @@ -1438,7 +1443,7 @@ /** * Enable the G26 Mesh Validation Pattern tool. */ - //#define G26_MESH_VALIDATION + #define G26_MESH_VALIDATION #if ENABLED(G26_MESH_VALIDATION) #define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle. #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for G26. @@ -1454,7 +1459,7 @@ #if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR) // Set the number of grid points per dimension. - #define GRID_MAX_POINTS_X 3 + #define GRID_MAX_POINTS_X 5 #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X // Probe along the Y axis, advancing X after each column @@ -1518,16 +1523,16 @@ * Add a bed leveling sub-menu for ABL or MBL. * Include a guided procedure if manual probing is enabled. */ -//#define LCD_BED_LEVELING +#define LCD_BED_LEVELING #if ENABLED(LCD_BED_LEVELING) #define MESH_EDIT_Z_STEP 0.025 // (mm) Step size while manually probing Z axis. #define LCD_PROBE_Z_RANGE 4 // (mm) Z Range centered on Z_MIN_POS for LCD Z adjustment - //#define MESH_EDIT_MENU // Add a menu to edit mesh points + #define MESH_EDIT_MENU // Add a menu to edit mesh points #endif // Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS +#define LEVEL_BED_CORNERS #if ENABLED(LEVEL_BED_CORNERS) #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets @@ -1595,7 +1600,7 @@ #endif // Homing speeds (mm/min) -#define HOMING_FEEDRATE_MM_M { (50*60), (50*60), (4*60) } +#define HOMING_FEEDRATE_MM_M { (80*60), (80*60), (20*60) } // Validate that endstops are triggered on homing moves #define VALIDATE_HOMING_ENDSTOPS @@ -1672,7 +1677,7 @@ * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) */ -//#define EEPROM_SETTINGS // Persistent storage with M500 and M501 +#define EEPROM_SETTINGS // Persistent storage with M500 and M501 //#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. #define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load @@ -1706,14 +1711,14 @@ // Preheat Constants - Up to 5 are supported without changes // #define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 180 -#define PREHEAT_1_TEMP_BED 70 +#define PREHEAT_1_TEMP_HOTEND 190 +#define PREHEAT_1_TEMP_BED 60 #define PREHEAT_1_TEMP_CHAMBER 35 #define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 #define PREHEAT_2_LABEL "ABS" #define PREHEAT_2_TEMP_HOTEND 240 -#define PREHEAT_2_TEMP_BED 110 +#define PREHEAT_2_TEMP_BED 90 #define PREHEAT_2_TEMP_CHAMBER 35 #define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 @@ -1728,11 +1733,11 @@ * P1 Raise the nozzle always to Z-park height. * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. */ -//#define NOZZLE_PARK_FEATURE +#define NOZZLE_PARK_FEATURE #if ENABLED(NOZZLE_PARK_FEATURE) // Specify a park position as { X, Y, Z_raise } - #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 } + #define NOZZLE_PARK_POINT { 3, (Y_MAX_POS - 3), 10 } //#define NOZZLE_PARK_X_ONLY // X move only is required to park //#define NOZZLE_PARK_Y_ONLY // Y move only is required to park #define NOZZLE_PARK_Z_RAISE_MIN 2 // (mm) Always raise Z by at least this distance @@ -1936,7 +1941,7 @@ * SD Card support is disabled by default. If your controller has an SD slot, * you must uncomment the following option or it won't work. */ -//#define SDSUPPORT +#define SDSUPPORT /** * SD CARD: ENABLE CRC @@ -1960,7 +1965,7 @@ // This option overrides the default number of encoder pulses needed to // produce one step. Should be increased for high-resolution encoders. // -//#define ENCODER_PULSES_PER_STEP 4 +#define ENCODER_PULSES_PER_STEP 2 // // Use this option to override the number of step signals required to @@ -2014,7 +2019,7 @@ // If you have a speaker that can produce tones, enable it here. // By default Marlin assumes you have a buzzer with a fixed frequency. // -//#define SPEAKER +#define SPEAKER // // The duration and frequency for the UI feedback sound. @@ -2195,7 +2200,10 @@ // RepRapDiscount FULL GRAPHIC Smart Controller // https://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller // -//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER +#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER +#define ST7920_DELAY_1 DELAY_NS(125) +#define ST7920_DELAY_2 DELAY_NS(125) +#define ST7920_DELAY_3 DELAY_NS(125) // // K.3D Full Graphic Smart Controller diff --git a/config/examples/Geeetech/A20T/Configuration_adv.h b/config/examples/Geeetech/A20T/Configuration_adv.h index 5335fa012a..1979129d9e 100644 --- a/config/examples/Geeetech/A20T/Configuration_adv.h +++ b/config/examples/Geeetech/A20T/Configuration_adv.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Geeetech/A20T" + /** * Configuration_adv.h * @@ -741,7 +743,7 @@ //#define HOMING_BACKOFF_POST_MM { 2, 2, 2 } // (mm) Backoff from endstops after homing -//#define QUICK_HOME // If G28 contains XY do a diagonal move first +#define QUICK_HOME // If G28 contains XY do a diagonal move first //#define HOME_Y_BEFORE_X // If G28 contains XY home Y before X //#define HOME_Z_FIRST // Home Z first. Requires a Z-MIN endstop (not a probe). //#define CODEPENDENT_XY_HOMING // If X/Y can't home without homing Y/X first @@ -766,7 +768,7 @@ // Safety: The probe needs time to recognize the command. // Minimum command delay (ms). Enable and increase if needed. - //#define BLTOUCH_DELAY 500 + #define BLTOUCH_DELAY 200 /** * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones: @@ -808,7 +810,7 @@ * This feature was designed for Deltabots with very fast Z moves; however, higher speed Cartesians * might be able to use it. If the machine can't raise Z fast enough the BLTouch may go into ALARM. */ - //#define BLTOUCH_HS_MODE + #define BLTOUCH_HS_MODE // Safety: Enable voltage mode settings in the LCD menu. //#define BLTOUCH_LCD_VOLTAGE_MENU @@ -867,7 +869,7 @@ // On a 300mm bed a 5% grade would give a misalignment of ~1.5cm #define G34_MAX_GRADE 5 // (%) Maximum incline that G34 will handle - #define Z_STEPPER_ALIGN_ITERATIONS 5 // Number of iterations to apply during alignment + #define Z_STEPPER_ALIGN_ITERATIONS 3 // Number of iterations to apply during alignment #define Z_STEPPER_ALIGN_ACC 0.02 // Stop iterating early if the accuracy is better than this #define RESTORE_LEVELING_AFTER_G34 // Restore leveling after G34 is done? // After G34, re-home Z (G28 Z) or just calculate it from the last probe heights? @@ -1145,8 +1147,8 @@ // Change values more rapidly when the encoder is rotated faster #define ENCODER_RATE_MULTIPLIER #if ENABLED(ENCODER_RATE_MULTIPLIER) - #define ENCODER_10X_STEPS_PER_SEC 30 // (steps/s) Encoder rate for 10x speed - #define ENCODER_100X_STEPS_PER_SEC 80 // (steps/s) Encoder rate for 100x speed + #define ENCODER_10X_STEPS_PER_SEC 10 // (steps/s) Encoder rate for 10x speed + #define ENCODER_100X_STEPS_PER_SEC 50 // (steps/s) Encoder rate for 100x speed #endif // Play a beep when the feedrate is changed from the Status Screen @@ -1175,7 +1177,7 @@ #endif // Include a page of printer information in the LCD Main Menu - //#define LCD_INFO_MENU + #define LCD_INFO_MENU #if ENABLED(LCD_INFO_MENU) //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages #endif @@ -1229,7 +1231,7 @@ #endif // Scroll a longer status message into view - //#define STATUS_MESSAGE_SCROLLING + #define STATUS_MESSAGE_SCROLLING // On the Info Screen, display XY with one decimal place when possible //#define LCD_DECIMAL_SMALL_XY @@ -1253,11 +1255,11 @@ #endif #if EITHER(HAS_MARLINUI_HD44780, IS_TFTGLCD_PANEL) - //#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing + #define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing #if ENABLED(LCD_PROGRESS_BAR) #define PROGRESS_BAR_BAR_TIME 2000 // (ms) Amount of time to show the bar - #define PROGRESS_BAR_MSG_TIME 3000 // (ms) Amount of time to show the status message - #define PROGRESS_MSG_EXPIRE 0 // (ms) Amount of time to retain the status message (0=forever) + #define PROGRESS_BAR_MSG_TIME 3500 // (ms) Amount of time to show the status message + #define PROGRESS_MSG_EXPIRE 180000 // (ms) Amount of time to retain the status message (0=forever) //#define PROGRESS_MSG_ONCE // Show the message for MSG_TIME then clear it //#define LCD_PROGRESS_BAR_TEST // Add a menu item to test the progress bar #endif @@ -1301,7 +1303,7 @@ //#define BROWSE_MEDIA_ON_INSERT // Open the file browser when media is inserted - #define EVENT_GCODE_SD_ABORT "G28XY" // G-code to run on SD Abort Print (e.g., "G28XY" or "G27") + #define EVENT_GCODE_SD_ABORT "G27" // G-code to run on SD Abort Print (e.g., "G28XY" or "G27") #if ENABLED(PRINTER_EVENT_LEDS) #define PE_LEDS_COMPLETED_TIME (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination @@ -1315,14 +1317,14 @@ * an option on the LCD screen to continue the print from the last-known * point in the file. */ - //#define POWER_LOSS_RECOVERY + #define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) //#define BACKUP_POWER_SUPPLY // Backup power / UPS to move the steppers on power loss //#define POWER_LOSS_ZRAISE 2 // (mm) Z axis raise on resume (on power loss with UPS) - //#define POWER_LOSS_PIN 44 // Pin to detect power loss. Set to -1 to disable default pin on boards without module. - //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss - //#define POWER_LOSS_PULLUP // Set pullup / pulldown as appropriate for your sensor + #define POWER_LOSS_PIN 69 // Pin to detect power loss. Set to -1 to disable default pin on boards without module. + #define POWER_LOSS_STATE LOW // State of pin indicating power loss + #define POWER_LOSS_PULLUP // Set pullup / pulldown as appropriate for your sensor //#define POWER_LOSS_PULLDOWN //#define POWER_LOSS_PURGE_LEN 20 // (mm) Length of filament to purge on resume //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power. @@ -1361,15 +1363,15 @@ * - SDSORT_CACHE_NAMES will retain the sorted file listing in RAM. (Expensive!) * - SDSORT_DYNAMIC_RAM only uses RAM when the SD menu is visible. (Use with caution!) */ - //#define SDCARD_SORT_ALPHA + #define SDCARD_SORT_ALPHA // SD Card Sorting options #if ENABLED(SDCARD_SORT_ALPHA) #define SDSORT_LIMIT 40 // Maximum number of sorted items (10-256). Costs 27 bytes each. #define FOLDER_SORTING -1 // -1=above 0=none 1=below #define SDSORT_GCODE false // Allow turning sorting on/off with LCD and M34 G-code. - #define SDSORT_USES_RAM false // Pre-allocate a static array for faster pre-sorting. - #define SDSORT_USES_STACK false // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.) + #define SDSORT_USES_RAM true // Pre-allocate a static array for faster pre-sorting. + #define SDSORT_USES_STACK true // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.) #define SDSORT_CACHE_NAMES false // Keep sorted items in RAM longer for speedy performance. Most expensive option. #define SDSORT_DYNAMIC_RAM false // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use! #define SDSORT_CACHE_VFATS 2 // Maximum number of 13-byte VFAT entries to use for sorting. @@ -1384,7 +1386,7 @@ //#define LONG_FILENAME_HOST_SUPPORT // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES + #define SCROLL_LONG_FILENAMES // Leave the heaters on after Stop Print (not recommended!) //#define SD_ABORT_NO_COOLDOWN @@ -1512,14 +1514,14 @@ */ #if HAS_MARLINUI_U8GLIB // Show SD percentage next to the progress bar - //#define DOGM_SD_PERCENT + #define DOGM_SD_PERCENT // Save many cycles by drawing a hollow frame or no frame on the Info Screen //#define XYZ_NO_FRAME #define XYZ_HOLLOW_FRAME // Enable to save many cycles by drawing a hollow frame on Menu Screens - #define MENU_HOLLOW_FRAME + //#define MENU_HOLLOW_FRAME // A bigger font is available for edit items. Costs 3120 bytes of PROGMEM. // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. @@ -1569,16 +1571,16 @@ //#define STATUS_CUTTER_ANIM // Use a second bitmap to indicate spindle / laser active //#define STATUS_COOLER_ANIM // Use a second bitmap to indicate laser cooling //#define STATUS_FLOWMETER_ANIM // Use multiple bitmaps to indicate coolant flow - //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap - //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap - //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames - //#define STATUS_HEAT_PERCENT // Show heating in a progress bar - //#define BOOT_MARLIN_LOGO_ANIMATED // Animated Marlin logo. Costs ~‭3260 (or ~940) bytes of PROGMEM. + #define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap + #define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap + #define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames + #define STATUS_HEAT_PERCENT // Show heating in a progress bar + #define BOOT_MARLIN_LOGO_ANIMATED // Animated Marlin logo. Costs ~‭3260 (or ~940) bytes of PROGMEM. // Frivolous Game Options - //#define MARLIN_BRICKOUT - //#define MARLIN_INVADERS - //#define MARLIN_SNAKE + #define MARLIN_BRICKOUT + #define MARLIN_INVADERS + #define MARLIN_SNAKE //#define GAMES_EASTER_EGG // Add extra blank lines above the "Games" sub-menu #endif // HAS_MARLINUI_U8GLIB @@ -1790,7 +1792,7 @@ * * Warning: Does not respect endstops! */ -//#define BABYSTEPPING +#define BABYSTEPPING #if ENABLED(BABYSTEPPING) //#define INTEGRATED_BABYSTEPPING // EXPERIMENTAL integration of babystepping into the Stepper ISR //#define BABYSTEP_WITHOUT_HOMING @@ -1801,17 +1803,17 @@ #define BABYSTEP_MULTIPLICATOR_Z 1 // (steps or mm) Steps or millimeter distance for each Z babystep #define BABYSTEP_MULTIPLICATOR_XY 1 // (steps or mm) Steps or millimeter distance for each XY babystep - //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. + #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on doubleclick when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) - #define MOVE_Z_IDLE_MULTIPLICATOR 1 // Multiply 1mm by this factor for the move step size. + #define MOVE_Z_IDLE_MULTIPLICATOR 5 // Multiply 1mm by this factor for the move step size. #endif #endif - //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 + #define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping #if ENABLED(BABYSTEP_ZPROBE_OFFSET) @@ -1837,12 +1839,12 @@ * * See https://marlinfw.org/docs/features/lin_advance.html for full instructions. */ -//#define LIN_ADVANCE +#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) //#define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants - #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed + #define LIN_ADVANCE_K 0 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // If enabled, this will generate debug information output over USB. - //#define EXPERIMENTAL_SCURVE // Enable this option to permit S-Curve Acceleration + #define EXPERIMENTAL_SCURVE // Enable this option to permit S-Curve Acceleration #endif // @section leveling @@ -2311,19 +2313,19 @@ * * Enable PARK_HEAD_ON_PAUSE to add the G-code M125 Pause and Park. */ -//#define ADVANCED_PAUSE_FEATURE +#define ADVANCED_PAUSE_FEATURE #if ENABLED(ADVANCED_PAUSE_FEATURE) #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. // This short retract is done immediately, before parking the nozzle. #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast. #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload. + #define FILAMENT_CHANGE_UNLOAD_LENGTH 400 // (mm) The length of filament for a complete unload. // For Bowden, the full length of the tube and nozzle. // For direct drive, the full length of the nozzle. // Set to 0 for manual unloading. #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE 6 // (mm/s) Slow move when starting load. - #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 0 // (mm) Slow length, to allow time to insert material. + #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 400 // (mm) Slow length, to allow time to insert material. // 0 to disable start loading and skip to fast load only #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast. #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. diff --git a/config/examples/Geeetech/A30/Configuration.h b/config/examples/Geeetech/A30/Configuration.h index 78c2dc9160..9c4a07c894 100644 --- a/config/examples/Geeetech/A30/Configuration.h +++ b/config/examples/Geeetech/A30/Configuration.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Geeetech/A30" + /** * Configuration.h * @@ -102,7 +104,7 @@ * * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] */ -#define SERIAL_PORT 0 +#define SERIAL_PORT 1 /** * Select a secondary serial port on the board to use for communication with the host. @@ -134,7 +136,7 @@ // Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_RAMPS_14_EFB + #define MOTHERBOARD BOARD_GTM32_MINI_A30 #endif // Name displayed in the LCD "Ready" message and Info menu @@ -424,7 +426,7 @@ #define TEMP_SENSOR_5 0 #define TEMP_SENSOR_6 0 #define TEMP_SENSOR_7 0 -#define TEMP_SENSOR_BED 0 +#define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 #define TEMP_SENSOR_COOLER 0 @@ -444,11 +446,11 @@ //#define TEMP_SENSOR_1_AS_REDUNDANT #define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10 -#define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 +#define TEMP_RESIDENCY_TIME 5 // (seconds) Time to wait for hotend to "settle" in M109 #define TEMP_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer #define TEMP_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target -#define TEMP_BED_RESIDENCY_TIME 10 // (seconds) Time to wait for bed to "settle" in M190 +#define TEMP_BED_RESIDENCY_TIME 5 // (seconds) Time to wait for bed to "settle" in M190 #define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer #define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target @@ -458,15 +460,15 @@ // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. -#define HEATER_0_MINTEMP 5 -#define HEATER_1_MINTEMP 5 -#define HEATER_2_MINTEMP 5 -#define HEATER_3_MINTEMP 5 -#define HEATER_4_MINTEMP 5 -#define HEATER_5_MINTEMP 5 -#define HEATER_6_MINTEMP 5 -#define HEATER_7_MINTEMP 5 -#define BED_MINTEMP 5 +#define HEATER_0_MINTEMP 0 +#define HEATER_1_MINTEMP 0 +#define HEATER_2_MINTEMP 0 +#define HEATER_3_MINTEMP 0 +#define HEATER_4_MINTEMP 0 +#define HEATER_5_MINTEMP 0 +#define HEATER_6_MINTEMP 0 +#define HEATER_7_MINTEMP 0 +#define BED_MINTEMP 0 #define CHAMBER_MINTEMP 5 // Above this temperature the heater will be switched off. @@ -513,13 +515,13 @@ #if ENABLED(PID_PARAMS_PER_HOTEND) // Specify between 1 and HOTENDS values per array. // If fewer than EXTRUDER values are provided, the last element will be repeated. - #define DEFAULT_Kp_LIST { 22.20, 22.20 } - #define DEFAULT_Ki_LIST { 1.08, 1.08 } - #define DEFAULT_Kd_LIST { 114.00, 114.00 } + #define DEFAULT_Kp_LIST { 45.80, 45.80 } + #define DEFAULT_Ki_LIST { 3.61, 3.61 } + #define DEFAULT_Kd_LIST { 145.39, 145.39 } #else - #define DEFAULT_Kp 22.20 - #define DEFAULT_Ki 1.08 - #define DEFAULT_Kd 114.00 + #define DEFAULT_Kp 45.80 + #define DEFAULT_Ki 3.61 + #define DEFAULT_Kd 145.39 #endif #endif // PIDTEMP @@ -540,7 +542,7 @@ * heater. If your configuration is significantly different than this and you don't understand * the issues involved, don't use bed PID until someone else verifies that your hardware works. */ -//#define PIDTEMPBED +#define PIDTEMPBED //#define BED_LIMIT_SWITCHING @@ -556,13 +558,11 @@ //#define MIN_BED_POWER 0 //#define PID_BED_DEBUG // Sends debug data to the serial port. - // 120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - // from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) - #define DEFAULT_bedKp 10.00 - #define DEFAULT_bedKi .023 - #define DEFAULT_bedKd 305.4 + #define DEFAULT_bedKp 369.610 + #define DEFAULT_bedKi 54.132 + #define DEFAULT_bedKd 602.870 - // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. + // FIND YOUR OWN: "M303 E-1 C8 S60" #endif // PIDTEMPBED //=========================================================================== @@ -627,14 +627,14 @@ * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** */ #define PREVENT_COLD_EXTRUSION -#define EXTRUDE_MINTEMP 170 +#define EXTRUDE_MINTEMP 100 /** * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. * Note: For Bowden Extruders make this large enough to allow load/unload. */ #define PREVENT_LENGTHY_EXTRUDE -#define EXTRUDE_MAXLENGTH 200 +#define EXTRUDE_MAXLENGTH 1000 //=========================================================================== //======================== Thermal Runaway Protection ======================= @@ -717,13 +717,13 @@ #endif // Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define X_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_PROBE_ENDSTOP_INVERTING false // Set to true to invert the logic of the probe. +#define X_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. +#define Y_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. +#define Z_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. +#define X_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. +#define Y_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. +#define Z_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. +#define Z_MIN_PROBE_ENDSTOP_INVERTING true // set to true to invert the logic of the probe. /** * Stepper Drivers @@ -806,7 +806,7 @@ * Override with M92 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 500 } +#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 98 } /** * Default Max Feed Rate (mm/s) @@ -841,9 +841,9 @@ * M204 R Retract Acceleration * M204 T Travel Acceleration */ -#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves +#define DEFAULT_ACCELERATION 500 // X, Y, Z and E acceleration for printing moves +#define DEFAULT_RETRACT_ACCELERATION 500 // E acceleration for retracts +#define DEFAULT_TRAVEL_ACCELERATION 500 // X, Y, Z acceleration for travel (non printing) moves /** * Default Jerk limits (mm/s) @@ -890,7 +890,7 @@ * * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained */ -//#define S_CURVE_ACCELERATION +#define S_CURVE_ACCELERATION //=========================================================================== //============================= Z Probe Options ============================= @@ -940,7 +940,7 @@ * Use G29 repeatedly, adjusting the Z height at each point with movement commands * or (with LCD_BED_LEVELING) the LCD controller. */ -//#define PROBE_MANUALLY +#define PROBE_MANUALLY /** * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. @@ -1059,10 +1059,10 @@ // Most probes should stay away from the edges of the bed, but // with NOZZLE_AS_PROBE this can be negative for a wider probing area. -#define PROBING_MARGIN 10 +#define PROBING_MARGIN 0 // X and Y axis travel speed (mm/min) between probes -#define XY_PROBE_FEEDRATE (133*60) +#define XY_PROBE_FEEDRATE (50*60) // Feedrate (mm/min) for the first approach when double-probing (MULTIPLE_PROBING == 2) #define Z_PROBE_FEEDRATE_FAST (4*60) @@ -1190,21 +1190,21 @@ // @section machine // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR false +#define INVERT_X_DIR true #define INVERT_Y_DIR true #define INVERT_Z_DIR false // @section extruder // For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR false -#define INVERT_E1_DIR false -#define INVERT_E2_DIR false -#define INVERT_E3_DIR false -#define INVERT_E4_DIR false -#define INVERT_E5_DIR false -#define INVERT_E6_DIR false -#define INVERT_E7_DIR false +#define INVERT_E0_DIR true +#define INVERT_E1_DIR true +#define INVERT_E2_DIR true +#define INVERT_E3_DIR true +#define INVERT_E4_DIR true +#define INVERT_E5_DIR true +#define INVERT_E6_DIR true +#define INVERT_E7_DIR true // @section homing @@ -1218,7 +1218,7 @@ */ //#define Z_IDLE_HEIGHT Z_HOME_POS -//#define Z_HOMING_HEIGHT 4 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ... +#define Z_HOMING_HEIGHT 5 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ... // Be sure to have this much clearance over your Z_MAX_POS to prevent grinding. //#define Z_AFTER_HOMING 10 // (mm) Height to move to after homing Z @@ -1232,16 +1232,16 @@ // @section machine // The size of the printable area -#define X_BED_SIZE 200 -#define Y_BED_SIZE 200 +#define X_BED_SIZE 320 +#define Y_BED_SIZE 320 // Travel limits (mm) after homing, corresponding to endstop positions. -#define X_MIN_POS 0 -#define Y_MIN_POS 0 +#define X_MIN_POS -10 +#define Y_MIN_POS -5 #define Z_MIN_POS 0 #define X_MAX_POS X_BED_SIZE #define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 200 +#define Z_MAX_POS 420 /** * Software Endstops @@ -1269,7 +1269,7 @@ #endif #if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS) - //#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD + #define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD #endif /** @@ -1289,8 +1289,9 @@ #if ENABLED(FILAMENT_RUNOUT_SENSOR) #define FIL_RUNOUT_ENABLED_DEFAULT true // Enable the sensor on startup. Override with M412 followed by M500. #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. + #define FIL_RUNOUT_PIN 66 - #define FIL_RUNOUT_STATE LOW // Pin state indicating that filament is NOT present. + #define FIL_RUNOUT_STATE HIGH // Pin state indicating that filament is NOT present. #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. //#define WATCH_ALL_RUNOUT_SENSORS // Execute runout script on any triggering sensor, not only for the active extruder. @@ -1388,7 +1389,7 @@ //#define AUTO_BED_LEVELING_3POINT //#define AUTO_BED_LEVELING_LINEAR //#define AUTO_BED_LEVELING_BILINEAR -//#define AUTO_BED_LEVELING_UBL +#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING /** @@ -1396,7 +1397,7 @@ * these options to restore the prior leveling state or to always enable * leveling immediately after G28. */ -//#define RESTORE_LEVELING_AFTER_G28 +#define RESTORE_LEVELING_AFTER_G28 //#define ENABLE_LEVELING_AFTER_G28 /** @@ -1454,17 +1455,17 @@ #if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR) // Set the number of grid points per dimension. - #define GRID_MAX_POINTS_X 3 + #define GRID_MAX_POINTS_X 5 #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X // Probe along the Y axis, advancing X after each column - //#define PROBE_Y_FIRST + #define PROBE_Y_FIRST #if ENABLED(AUTO_BED_LEVELING_BILINEAR) // Beyond the probed grid, continue the implied tilt? // Default is to maintain the height of the nearest edge. - //#define EXTRAPOLATE_BEYOND_GRID + #define EXTRAPOLATE_BEYOND_GRID // // Experimental Subdivision of the grid by Catmull-Rom method. @@ -1486,8 +1487,8 @@ //#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh - #define MESH_INSET 1 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. + #define MESH_INSET 0 // Set Mesh bounds as an inset region of the bed + #define GRID_MAX_POINTS_X 5 // Don't use more than 15 points per axis, implementation limited. #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X //#define UBL_HILBERT_CURVE // Use Hilbert distribution for less travel when probing multiple points @@ -1495,7 +1496,7 @@ #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 - //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used + #define UBL_Z_RAISE_WHEN_OFF_MESH 0 // When the nozzle is off the mesh, this value is used // as the Z-Height correction value. //#define UBL_MESH_WIZARD // Run several commands in a row to get a complete mesh @@ -1506,7 +1507,7 @@ //=================================== Mesh ================================== //=========================================================================== - #define MESH_INSET 10 // Set Mesh bounds as an inset region of the bed + #define MESH_INSET 0 // Set Mesh bounds as an inset region of the bed #define GRID_MAX_POINTS_X 3 // Don't use more than 7 points per axis, implementation limited. #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X @@ -1672,12 +1673,12 @@ * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) */ -//#define EEPROM_SETTINGS // Persistent storage with M500 and M501 +#define EEPROM_SETTINGS // Persistent storage with M500 and M501 //#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. #define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load #if ENABLED(EEPROM_SETTINGS) - //#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. + #define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. #endif // @@ -1706,14 +1707,14 @@ // Preheat Constants - Up to 5 are supported without changes // #define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 180 -#define PREHEAT_1_TEMP_BED 70 +#define PREHEAT_1_TEMP_HOTEND 200 +#define PREHEAT_1_TEMP_BED 60 #define PREHEAT_1_TEMP_CHAMBER 35 #define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 #define PREHEAT_2_LABEL "ABS" -#define PREHEAT_2_TEMP_HOTEND 240 -#define PREHEAT_2_TEMP_BED 110 +#define PREHEAT_2_TEMP_HOTEND 250 +#define PREHEAT_2_TEMP_BED 100 #define PREHEAT_2_TEMP_CHAMBER 35 #define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 @@ -1728,11 +1729,11 @@ * P1 Raise the nozzle always to Z-park height. * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. */ -//#define NOZZLE_PARK_FEATURE +#define NOZZLE_PARK_FEATURE #if ENABLED(NOZZLE_PARK_FEATURE) // Specify a park position as { X, Y, Z_raise } - #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 } + #define NOZZLE_PARK_POINT { (X_MIN_POS + 20), (Y_MIN_POS + 20),Z_MIN_POS + 20 } //#define NOZZLE_PARK_X_ONLY // X move only is required to park //#define NOZZLE_PARK_Y_ONLY // Y move only is required to park #define NOZZLE_PARK_Z_RAISE_MIN 2 // (mm) Always raise Z by at least this distance @@ -1936,7 +1937,8 @@ * SD Card support is disabled by default. If your controller has an SD slot, * you must uncomment the following option or it won't work. */ -//#define SDSUPPORT +#define SDSUPPORT +#define SDIO_SUPPORT /** * SD CARD: ENABLE CRC @@ -2006,7 +2008,7 @@ // // Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. // -//#define INDIVIDUAL_AXIS_HOMING_MENU +#define INDIVIDUAL_AXIS_HOMING_MENU // // SPEAKER/BUZZER @@ -2014,7 +2016,7 @@ // If you have a speaker that can produce tones, enable it here. // By default Marlin assumes you have a buzzer with a fixed frequency. // -//#define SPEAKER +#define SPEAKER // // The duration and frequency for the UI feedback sound. @@ -2023,8 +2025,8 @@ // Note: Test audio output with the G-Code: // M300 S P // -//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 -//#define LCD_FEEDBACK_FREQUENCY_HZ 5000 +#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 50 +#define LCD_FEEDBACK_FREQUENCY_HZ 10 //============================================================================= //======================== LCD / Controller Selection ========================= @@ -2037,7 +2039,7 @@ // // Note: Usually sold with a white PCB. // -//#define REPRAP_DISCOUNT_SMART_CONTROLLER +#define REPRAP_DISCOUNT_SMART_CONTROLLER // // GT2560 (YHCB2004) LCD Display @@ -2196,6 +2198,9 @@ // https://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller // //#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER +//#define ST7920_DELAY_1 DELAY_NS(125) +//#define ST7920_DELAY_2 DELAY_NS(125) +//#define ST7920_DELAY_3 DELAY_NS(125) // // K.3D Full Graphic Smart Controller @@ -2618,7 +2623,7 @@ // Use software PWM to drive the fan, as for the heaters. This uses a very low frequency // which is not as annoying as with the hardware PWM. On the other hand, if this frequency // is too low, you should also increment SOFT_PWM_SCALE. -//#define FAN_SOFT_PWM +#define FAN_SOFT_PWM // Incrementing this by 1 will double the software PWM frequency, // affecting heaters, and the fan if FAN_SOFT_PWM is enabled. diff --git a/config/examples/Geeetech/A30/Configuration_adv.h b/config/examples/Geeetech/A30/Configuration_adv.h index 5335fa012a..16f1148aa5 100644 --- a/config/examples/Geeetech/A30/Configuration_adv.h +++ b/config/examples/Geeetech/A30/Configuration_adv.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Geeetech/A30" + /** * Configuration_adv.h * @@ -307,7 +309,7 @@ #if ENABLED(PIDTEMP) // Add an experimental additional term to the heater power, proportional to the extrusion speed. // A well-chosen Kc value should add just enough power to melt the increased material volume. - //#define PID_EXTRUSION_SCALING + #define PID_EXTRUSION_SCALING #if ENABLED(PID_EXTRUSION_SCALING) #define DEFAULT_Kc (100) // heating power = Kc * e_speed #define LPQ_MAX_LEN 50 @@ -341,7 +343,7 @@ * 5. Enable PID_FAN_SCALING_ALTERNATIVE_DEFINITION and enter the two identified Kf-values in * PID_FAN_SCALING_AT_FULL_SPEED and PID_FAN_SCALING_AT_MIN_SPEED. Enter the minimum speed in PID_FAN_SCALING_MIN_SPEED */ - //#define PID_FAN_SCALING + #define PID_FAN_SCALING #if ENABLED(PID_FAN_SCALING) //#define PID_FAN_SCALING_ALTERNATIVE_DEFINITION #if ENABLED(PID_FAN_SCALING_ALTERNATIVE_DEFINITION) @@ -411,14 +413,14 @@ // The number of consecutive low temperature errors that can occur // before a min_temp_error is triggered. (Shouldn't be more than 10.) -//#define MAX_CONSECUTIVE_LOW_TEMPERATURE_ERROR_ALLOWED 0 +//#define MAX_CONSECUTIVE_LOW_TEMPERATURE_ERROR_ALLOWED 10 // The number of milliseconds a hotend will preheat before starting to check // the temperature. This value should NOT be set to the time it takes the // hot end to reach the target temperature, but the time it takes to reach // the minimum temperature your thermistor can read. The lower the better/safer. // This shouldn't need to be more than 30 seconds (30000) -//#define MILLISECONDS_PREHEAT_TIME 0 +//#define MILLISECONDS_PREHEAT_TIME 30000 // @section extruder @@ -736,13 +738,13 @@ //#define SENSORLESS_BACKOFF_MM { 2, 2 } // (mm) Backoff from endstops before sensorless homing -#define HOMING_BUMP_MM { 5, 5, 2 } // (mm) Backoff from endstops after first bump -#define HOMING_BUMP_DIVISOR { 2, 2, 4 } // Re-Bump Speed Divisor (Divides the Homing Feedrate) +#define HOMING_BUMP_MM { 5, 5, 5 } // (mm) Backoff from endstops after first bump +#define HOMING_BUMP_DIVISOR { 4, 4, 4 } // Re-Bump Speed Divisor (Divides the Homing Feedrate) //#define HOMING_BACKOFF_POST_MM { 2, 2, 2 } // (mm) Backoff from endstops after homing //#define QUICK_HOME // If G28 contains XY do a diagonal move first -//#define HOME_Y_BEFORE_X // If G28 contains XY home Y before X +#define HOME_Y_BEFORE_X // If G28 contains XY home Y before X //#define HOME_Z_FIRST // Home Z first. Requires a Z-MIN endstop (not a probe). //#define CODEPENDENT_XY_HOMING // If X/Y can't home without homing Y/X first @@ -867,7 +869,7 @@ // On a 300mm bed a 5% grade would give a misalignment of ~1.5cm #define G34_MAX_GRADE 5 // (%) Maximum incline that G34 will handle - #define Z_STEPPER_ALIGN_ITERATIONS 5 // Number of iterations to apply during alignment + #define Z_STEPPER_ALIGN_ITERATIONS 3 // Number of iterations to apply during alignment #define Z_STEPPER_ALIGN_ACC 0.02 // Stop iterating early if the accuracy is better than this #define RESTORE_LEVELING_AFTER_G34 // Restore leveling after G34 is done? // After G34, re-home Z (G28 Z) or just calculate it from the last probe heights? @@ -1790,20 +1792,20 @@ * * Warning: Does not respect endstops! */ -//#define BABYSTEPPING +#define BABYSTEPPING #if ENABLED(BABYSTEPPING) //#define INTEGRATED_BABYSTEPPING // EXPERIMENTAL integration of babystepping into the Stepper ISR //#define BABYSTEP_WITHOUT_HOMING - //#define BABYSTEP_ALWAYS_AVAILABLE // Allow babystepping at all times (not just during movement). + #define BABYSTEP_ALWAYS_AVAILABLE // Allow babystepping at all times (not just during movement). //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way //#define BABYSTEP_MILLIMETER_UNITS // Specify BABYSTEP_MULTIPLICATOR_(XY|Z) in mm instead of micro-steps #define BABYSTEP_MULTIPLICATOR_Z 1 // (steps or mm) Steps or millimeter distance for each Z babystep #define BABYSTEP_MULTIPLICATOR_XY 1 // (steps or mm) Steps or millimeter distance for each XY babystep - //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. + #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 2000 // Maximum interval between clicks, in milliseconds. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on doubleclick when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) @@ -1837,12 +1839,12 @@ * * See https://marlinfw.org/docs/features/lin_advance.html for full instructions. */ -//#define LIN_ADVANCE +#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants - #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed + #define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants + #define LIN_ADVANCE_K 0 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // If enabled, this will generate debug information output over USB. - //#define EXPERIMENTAL_SCURVE // Enable this option to permit S-Curve Acceleration + #define EXPERIMENTAL_SCURVE // Enable this option to permit S-Curve Acceleration #endif // @section leveling @@ -1989,13 +1991,13 @@ #define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle //#define ARC_SEGMENTS_PER_SEC 50 // Use feedrate to choose segment length (with MM_PER_ARC_SEGMENT as the minimum) #define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections - //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles - //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes + #define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles + #define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes //#define SF_ARC_FIX // Enable only if using SkeinForge with "Arc Point" fillet procedure #endif -// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes. -//#define BEZIER_CURVE_SUPPORT +// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes. - unused by most slicers +#define BEZIER_CURVE_SUPPORT /** * Direct Stepping @@ -2170,7 +2172,7 @@ //#define NO_TIMEOUTS 1000 // Milliseconds // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. -//#define ADVANCED_OK +#define ADVANCED_OK // Printrun may have trouble receiving long strings all at once. // This option inserts short delays between lines of serial output. @@ -2313,47 +2315,46 @@ */ //#define ADVANCED_PAUSE_FEATURE #if ENABLED(ADVANCED_PAUSE_FEATURE) - #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. + #define PAUSE_PARK_RETRACT_FEEDRATE 10 // (mm/s) Initial retract feedrate. #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. // This short retract is done immediately, before parking the nozzle. #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast. #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload. + #define FILAMENT_CHANGE_UNLOAD_LENGTH 450 // (mm) The length of filament for a complete unload. // For Bowden, the full length of the tube and nozzle. // For direct drive, the full length of the nozzle. // Set to 0 for manual unloading. - #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE 6 // (mm/s) Slow move when starting load. - #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 0 // (mm) Slow length, to allow time to insert material. + #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE 5 // (mm/s) Slow move when starting load. + #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 300 // (mm) Slow length, to allow time to insert material. // 0 to disable start loading and skip to fast load only - #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast. + #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 10 // (mm/s) Load filament feedrate. This can be pretty fast. #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle. + #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 300 // (mm) Load length of filament, from extruder gear to nozzle. // For Bowden, the full length of the tube and nozzle. // For direct drive, the full length of the nozzle. //#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted. - #define ADVANCED_PAUSE_PURGE_FEEDRATE 3 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate. - #define ADVANCED_PAUSE_PURGE_LENGTH 50 // (mm) Length to extrude after loading. + #define ADVANCED_PAUSE_PURGE_FEEDRATE 5 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate. + #define ADVANCED_PAUSE_PURGE_LENGTH 25 // (mm) Length to extrude after loading. // Set to 0 for manual extrusion. // Filament can be extruded repeatedly from the Filament Change menu // until extrusion is consistent, and to purge old filament. - #define ADVANCED_PAUSE_RESUME_PRIME 0 // (mm) Extra distance to prime nozzle after returning from park. - //#define ADVANCED_PAUSE_FANS_PAUSE // Turn off print-cooling fans while the machine is paused. + #define ADVANCED_PAUSE_RESUME_PRIME 1 // (mm) Extra distance to prime nozzle after returning from park. // Filament Unload does a Retract, Delay, and Purge first: - #define FILAMENT_UNLOAD_PURGE_RETRACT 13 // (mm) Unload initial retract length. + #define FILAMENT_UNLOAD_PURGE_RETRACT 20 // (mm) Unload initial retract length. #define FILAMENT_UNLOAD_PURGE_DELAY 5000 // (ms) Delay for the filament to cool after retract. - #define FILAMENT_UNLOAD_PURGE_LENGTH 8 // (mm) An unretract is done, then this length is purged. + #define FILAMENT_UNLOAD_PURGE_LENGTH 10 // (mm) An unretract is done, then this length is purged. #define FILAMENT_UNLOAD_PURGE_FEEDRATE 25 // (mm/s) feedrate to purge before unload - #define PAUSE_PARK_NOZZLE_TIMEOUT 45 // (seconds) Time limit before the nozzle is turned off for safety. + #define PAUSE_PARK_NOZZLE_TIMEOUT 60 // (seconds) Time limit before the nozzle is turned off for safety. #define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed. #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change. - //#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. - //#define HOME_BEFORE_FILAMENT_CHANGE // If needed, home before parking for filament change + #define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. + #define HOME_BEFORE_FILAMENT_CHANGE // If needed, home before parking for filament change - //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. - //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) + #define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. + #define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) #endif // @section tmc @@ -3650,9 +3651,9 @@ * Host Prompt Support enables Marlin to use the host for user prompts so * filament runout and other processes can be managed from the host side. */ -//#define HOST_ACTION_COMMANDS +#define HOST_ACTION_COMMANDS #if ENABLED(HOST_ACTION_COMMANDS) - //#define HOST_PROMPT_SUPPORT + #define HOST_PROMPT_SUPPORT //#define HOST_START_MENU_ITEM // Add a menu item that tells the host to start #endif diff --git a/config/examples/Geeetech/A30M/Configuration.h b/config/examples/Geeetech/A30M/Configuration.h index 78c2dc9160..de0cbc0de1 100644 --- a/config/examples/Geeetech/A30M/Configuration.h +++ b/config/examples/Geeetech/A30M/Configuration.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Geeetech/A30M" + /** * Configuration.h * @@ -102,7 +104,7 @@ * * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] */ -#define SERIAL_PORT 0 +#define SERIAL_PORT 1 /** * Select a secondary serial port on the board to use for communication with the host. @@ -134,7 +136,7 @@ // Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_RAMPS_14_EFB + #define MOTHERBOARD BOARD_GTM32_MINI_A30 #endif // Name displayed in the LCD "Ready" message and Info menu @@ -292,7 +294,7 @@ * - This implementation supports up to two mixing extruders. * - Enable DIRECT_MIXING_IN_G1 for M165 and mixing in G1 (from Pia Taubert's reference implementation). */ -//#define MIXING_EXTRUDER +#define MIXING_EXTRUDER #if ENABLED(MIXING_EXTRUDER) #define MIXING_STEPPERS 2 // Number of steppers in your mixing extruder #define MIXING_VIRTUAL_TOOLS 16 // Use the Virtual Tool method with M163 and M164 @@ -424,7 +426,7 @@ #define TEMP_SENSOR_5 0 #define TEMP_SENSOR_6 0 #define TEMP_SENSOR_7 0 -#define TEMP_SENSOR_BED 0 +#define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 #define TEMP_SENSOR_COOLER 0 @@ -444,11 +446,11 @@ //#define TEMP_SENSOR_1_AS_REDUNDANT #define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10 -#define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 +#define TEMP_RESIDENCY_TIME 5 // (seconds) Time to wait for hotend to "settle" in M109 #define TEMP_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer #define TEMP_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target -#define TEMP_BED_RESIDENCY_TIME 10 // (seconds) Time to wait for bed to "settle" in M190 +#define TEMP_BED_RESIDENCY_TIME 5 // (seconds) Time to wait for bed to "settle" in M190 #define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer #define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target @@ -458,15 +460,15 @@ // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. -#define HEATER_0_MINTEMP 5 -#define HEATER_1_MINTEMP 5 -#define HEATER_2_MINTEMP 5 -#define HEATER_3_MINTEMP 5 -#define HEATER_4_MINTEMP 5 -#define HEATER_5_MINTEMP 5 -#define HEATER_6_MINTEMP 5 -#define HEATER_7_MINTEMP 5 -#define BED_MINTEMP 5 +#define HEATER_0_MINTEMP 0 +#define HEATER_1_MINTEMP 0 +#define HEATER_2_MINTEMP 0 +#define HEATER_3_MINTEMP 0 +#define HEATER_4_MINTEMP 0 +#define HEATER_5_MINTEMP 0 +#define HEATER_6_MINTEMP 0 +#define HEATER_7_MINTEMP 0 +#define BED_MINTEMP 0 #define CHAMBER_MINTEMP 5 // Above this temperature the heater will be switched off. @@ -513,13 +515,13 @@ #if ENABLED(PID_PARAMS_PER_HOTEND) // Specify between 1 and HOTENDS values per array. // If fewer than EXTRUDER values are provided, the last element will be repeated. - #define DEFAULT_Kp_LIST { 22.20, 22.20 } - #define DEFAULT_Ki_LIST { 1.08, 1.08 } - #define DEFAULT_Kd_LIST { 114.00, 114.00 } + #define DEFAULT_Kp_LIST { 45.80, 45.80 } + #define DEFAULT_Ki_LIST { 3.61, 3.61 } + #define DEFAULT_Kd_LIST { 145.39, 145.39 } #else - #define DEFAULT_Kp 22.20 - #define DEFAULT_Ki 1.08 - #define DEFAULT_Kd 114.00 + #define DEFAULT_Kp 45.80 + #define DEFAULT_Ki 3.61 + #define DEFAULT_Kd 145.39 #endif #endif // PIDTEMP @@ -540,7 +542,7 @@ * heater. If your configuration is significantly different than this and you don't understand * the issues involved, don't use bed PID until someone else verifies that your hardware works. */ -//#define PIDTEMPBED +#define PIDTEMPBED //#define BED_LIMIT_SWITCHING @@ -556,13 +558,11 @@ //#define MIN_BED_POWER 0 //#define PID_BED_DEBUG // Sends debug data to the serial port. - // 120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - // from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) - #define DEFAULT_bedKp 10.00 - #define DEFAULT_bedKi .023 - #define DEFAULT_bedKd 305.4 + #define DEFAULT_bedKp 369.610 + #define DEFAULT_bedKi 54.132 + #define DEFAULT_bedKd 602.870 - // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. + // FIND YOUR OWN: "M303 E-1 C8 S60" #endif // PIDTEMPBED //=========================================================================== @@ -627,14 +627,14 @@ * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** */ #define PREVENT_COLD_EXTRUSION -#define EXTRUDE_MINTEMP 170 +#define EXTRUDE_MINTEMP 100 /** * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. * Note: For Bowden Extruders make this large enough to allow load/unload. */ #define PREVENT_LENGTHY_EXTRUDE -#define EXTRUDE_MAXLENGTH 200 +#define EXTRUDE_MAXLENGTH 1000 //=========================================================================== //======================== Thermal Runaway Protection ======================= @@ -717,13 +717,13 @@ #endif // Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define X_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_PROBE_ENDSTOP_INVERTING false // Set to true to invert the logic of the probe. +#define X_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. +#define Y_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. +#define Z_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. +#define X_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. +#define Y_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. +#define Z_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. +#define Z_MIN_PROBE_ENDSTOP_INVERTING true // set to true to invert the logic of the probe. /** * Stepper Drivers @@ -806,7 +806,7 @@ * Override with M92 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 500 } +#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 98 } /** * Default Max Feed Rate (mm/s) @@ -841,9 +841,9 @@ * M204 R Retract Acceleration * M204 T Travel Acceleration */ -#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves +#define DEFAULT_ACCELERATION 500 // X, Y, Z and E acceleration for printing moves +#define DEFAULT_RETRACT_ACCELERATION 500 // E acceleration for retracts +#define DEFAULT_TRAVEL_ACCELERATION 500 // X, Y, Z acceleration for travel (non printing) moves /** * Default Jerk limits (mm/s) @@ -890,7 +890,7 @@ * * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained */ -//#define S_CURVE_ACCELERATION +#define S_CURVE_ACCELERATION //=========================================================================== //============================= Z Probe Options ============================= @@ -940,7 +940,7 @@ * Use G29 repeatedly, adjusting the Z height at each point with movement commands * or (with LCD_BED_LEVELING) the LCD controller. */ -//#define PROBE_MANUALLY +#define PROBE_MANUALLY /** * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. @@ -1059,10 +1059,10 @@ // Most probes should stay away from the edges of the bed, but // with NOZZLE_AS_PROBE this can be negative for a wider probing area. -#define PROBING_MARGIN 10 +#define PROBING_MARGIN 0 // X and Y axis travel speed (mm/min) between probes -#define XY_PROBE_FEEDRATE (133*60) +#define XY_PROBE_FEEDRATE (50*60) // Feedrate (mm/min) for the first approach when double-probing (MULTIPLE_PROBING == 2) #define Z_PROBE_FEEDRATE_FAST (4*60) @@ -1190,21 +1190,21 @@ // @section machine // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR false +#define INVERT_X_DIR true #define INVERT_Y_DIR true #define INVERT_Z_DIR false // @section extruder // For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR false -#define INVERT_E1_DIR false -#define INVERT_E2_DIR false -#define INVERT_E3_DIR false -#define INVERT_E4_DIR false -#define INVERT_E5_DIR false -#define INVERT_E6_DIR false -#define INVERT_E7_DIR false +#define INVERT_E0_DIR true +#define INVERT_E1_DIR true +#define INVERT_E2_DIR true +#define INVERT_E3_DIR true +#define INVERT_E4_DIR true +#define INVERT_E5_DIR true +#define INVERT_E6_DIR true +#define INVERT_E7_DIR true // @section homing @@ -1218,7 +1218,7 @@ */ //#define Z_IDLE_HEIGHT Z_HOME_POS -//#define Z_HOMING_HEIGHT 4 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ... +#define Z_HOMING_HEIGHT 5 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ... // Be sure to have this much clearance over your Z_MAX_POS to prevent grinding. //#define Z_AFTER_HOMING 10 // (mm) Height to move to after homing Z @@ -1232,16 +1232,16 @@ // @section machine // The size of the printable area -#define X_BED_SIZE 200 -#define Y_BED_SIZE 200 +#define X_BED_SIZE 320 +#define Y_BED_SIZE 320 // Travel limits (mm) after homing, corresponding to endstop positions. -#define X_MIN_POS 0 -#define Y_MIN_POS 0 +#define X_MIN_POS -10 +#define Y_MIN_POS -5 #define Z_MIN_POS 0 #define X_MAX_POS X_BED_SIZE #define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 200 +#define Z_MAX_POS 420 /** * Software Endstops @@ -1269,7 +1269,7 @@ #endif #if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS) - //#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD + #define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD #endif /** @@ -1289,8 +1289,9 @@ #if ENABLED(FILAMENT_RUNOUT_SENSOR) #define FIL_RUNOUT_ENABLED_DEFAULT true // Enable the sensor on startup. Override with M412 followed by M500. #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. + #define FIL_RUNOUT_PIN 66 - #define FIL_RUNOUT_STATE LOW // Pin state indicating that filament is NOT present. + #define FIL_RUNOUT_STATE HIGH // Pin state indicating that filament is NOT present. #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. //#define WATCH_ALL_RUNOUT_SENSORS // Execute runout script on any triggering sensor, not only for the active extruder. @@ -1388,7 +1389,7 @@ //#define AUTO_BED_LEVELING_3POINT //#define AUTO_BED_LEVELING_LINEAR //#define AUTO_BED_LEVELING_BILINEAR -//#define AUTO_BED_LEVELING_UBL +#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING /** @@ -1396,7 +1397,7 @@ * these options to restore the prior leveling state or to always enable * leveling immediately after G28. */ -//#define RESTORE_LEVELING_AFTER_G28 +#define RESTORE_LEVELING_AFTER_G28 //#define ENABLE_LEVELING_AFTER_G28 /** @@ -1454,17 +1455,17 @@ #if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR) // Set the number of grid points per dimension. - #define GRID_MAX_POINTS_X 3 + #define GRID_MAX_POINTS_X 5 #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X // Probe along the Y axis, advancing X after each column - //#define PROBE_Y_FIRST + #define PROBE_Y_FIRST #if ENABLED(AUTO_BED_LEVELING_BILINEAR) // Beyond the probed grid, continue the implied tilt? // Default is to maintain the height of the nearest edge. - //#define EXTRAPOLATE_BEYOND_GRID + #define EXTRAPOLATE_BEYOND_GRID // // Experimental Subdivision of the grid by Catmull-Rom method. @@ -1486,8 +1487,8 @@ //#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh - #define MESH_INSET 1 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. + #define MESH_INSET 0 // Set Mesh bounds as an inset region of the bed + #define GRID_MAX_POINTS_X 5 // Don't use more than 15 points per axis, implementation limited. #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X //#define UBL_HILBERT_CURVE // Use Hilbert distribution for less travel when probing multiple points @@ -1495,7 +1496,7 @@ #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 - //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used + #define UBL_Z_RAISE_WHEN_OFF_MESH 0 // When the nozzle is off the mesh, this value is used // as the Z-Height correction value. //#define UBL_MESH_WIZARD // Run several commands in a row to get a complete mesh @@ -1506,7 +1507,7 @@ //=================================== Mesh ================================== //=========================================================================== - #define MESH_INSET 10 // Set Mesh bounds as an inset region of the bed + #define MESH_INSET 0 // Set Mesh bounds as an inset region of the bed #define GRID_MAX_POINTS_X 3 // Don't use more than 7 points per axis, implementation limited. #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X @@ -1672,12 +1673,12 @@ * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) */ -//#define EEPROM_SETTINGS // Persistent storage with M500 and M501 +#define EEPROM_SETTINGS // Persistent storage with M500 and M501 //#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. #define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load #if ENABLED(EEPROM_SETTINGS) - //#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. + #define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. #endif // @@ -1706,14 +1707,14 @@ // Preheat Constants - Up to 5 are supported without changes // #define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 180 -#define PREHEAT_1_TEMP_BED 70 +#define PREHEAT_1_TEMP_HOTEND 200 +#define PREHEAT_1_TEMP_BED 60 #define PREHEAT_1_TEMP_CHAMBER 35 #define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 #define PREHEAT_2_LABEL "ABS" -#define PREHEAT_2_TEMP_HOTEND 240 -#define PREHEAT_2_TEMP_BED 110 +#define PREHEAT_2_TEMP_HOTEND 250 +#define PREHEAT_2_TEMP_BED 100 #define PREHEAT_2_TEMP_CHAMBER 35 #define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 @@ -1728,11 +1729,11 @@ * P1 Raise the nozzle always to Z-park height. * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. */ -//#define NOZZLE_PARK_FEATURE +#define NOZZLE_PARK_FEATURE #if ENABLED(NOZZLE_PARK_FEATURE) // Specify a park position as { X, Y, Z_raise } - #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 } + #define NOZZLE_PARK_POINT { (X_MIN_POS + 20), (Y_MIN_POS + 20),Z_MIN_POS + 20 } //#define NOZZLE_PARK_X_ONLY // X move only is required to park //#define NOZZLE_PARK_Y_ONLY // Y move only is required to park #define NOZZLE_PARK_Z_RAISE_MIN 2 // (mm) Always raise Z by at least this distance @@ -1936,7 +1937,8 @@ * SD Card support is disabled by default. If your controller has an SD slot, * you must uncomment the following option or it won't work. */ -//#define SDSUPPORT +#define SDSUPPORT +#define SDIO_SUPPORT /** * SD CARD: ENABLE CRC @@ -2006,7 +2008,7 @@ // // Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. // -//#define INDIVIDUAL_AXIS_HOMING_MENU +#define INDIVIDUAL_AXIS_HOMING_MENU // // SPEAKER/BUZZER @@ -2014,7 +2016,7 @@ // If you have a speaker that can produce tones, enable it here. // By default Marlin assumes you have a buzzer with a fixed frequency. // -//#define SPEAKER +#define SPEAKER // // The duration and frequency for the UI feedback sound. @@ -2023,8 +2025,8 @@ // Note: Test audio output with the G-Code: // M300 S P // -//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 -//#define LCD_FEEDBACK_FREQUENCY_HZ 5000 +#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 50 +#define LCD_FEEDBACK_FREQUENCY_HZ 10 //============================================================================= //======================== LCD / Controller Selection ========================= @@ -2037,7 +2039,7 @@ // // Note: Usually sold with a white PCB. // -//#define REPRAP_DISCOUNT_SMART_CONTROLLER +#define REPRAP_DISCOUNT_SMART_CONTROLLER // // GT2560 (YHCB2004) LCD Display @@ -2196,6 +2198,9 @@ // https://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller // //#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER +//#define ST7920_DELAY_1 DELAY_NS(125) +//#define ST7920_DELAY_2 DELAY_NS(125) +//#define ST7920_DELAY_3 DELAY_NS(125) // // K.3D Full Graphic Smart Controller @@ -2618,7 +2623,7 @@ // Use software PWM to drive the fan, as for the heaters. This uses a very low frequency // which is not as annoying as with the hardware PWM. On the other hand, if this frequency // is too low, you should also increment SOFT_PWM_SCALE. -//#define FAN_SOFT_PWM +#define FAN_SOFT_PWM // Incrementing this by 1 will double the software PWM frequency, // affecting heaters, and the fan if FAN_SOFT_PWM is enabled. diff --git a/config/examples/Geeetech/A30M/Configuration_adv.h b/config/examples/Geeetech/A30M/Configuration_adv.h index 5335fa012a..2eb932800b 100644 --- a/config/examples/Geeetech/A30M/Configuration_adv.h +++ b/config/examples/Geeetech/A30M/Configuration_adv.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Geeetech/A30M" + /** * Configuration_adv.h * @@ -307,7 +309,7 @@ #if ENABLED(PIDTEMP) // Add an experimental additional term to the heater power, proportional to the extrusion speed. // A well-chosen Kc value should add just enough power to melt the increased material volume. - //#define PID_EXTRUSION_SCALING + #define PID_EXTRUSION_SCALING #if ENABLED(PID_EXTRUSION_SCALING) #define DEFAULT_Kc (100) // heating power = Kc * e_speed #define LPQ_MAX_LEN 50 @@ -341,7 +343,7 @@ * 5. Enable PID_FAN_SCALING_ALTERNATIVE_DEFINITION and enter the two identified Kf-values in * PID_FAN_SCALING_AT_FULL_SPEED and PID_FAN_SCALING_AT_MIN_SPEED. Enter the minimum speed in PID_FAN_SCALING_MIN_SPEED */ - //#define PID_FAN_SCALING + #define PID_FAN_SCALING #if ENABLED(PID_FAN_SCALING) //#define PID_FAN_SCALING_ALTERNATIVE_DEFINITION #if ENABLED(PID_FAN_SCALING_ALTERNATIVE_DEFINITION) @@ -411,14 +413,14 @@ // The number of consecutive low temperature errors that can occur // before a min_temp_error is triggered. (Shouldn't be more than 10.) -//#define MAX_CONSECUTIVE_LOW_TEMPERATURE_ERROR_ALLOWED 0 +//#define MAX_CONSECUTIVE_LOW_TEMPERATURE_ERROR_ALLOWED 10 // The number of milliseconds a hotend will preheat before starting to check // the temperature. This value should NOT be set to the time it takes the // hot end to reach the target temperature, but the time it takes to reach // the minimum temperature your thermistor can read. The lower the better/safer. // This shouldn't need to be more than 30 seconds (30000) -//#define MILLISECONDS_PREHEAT_TIME 0 +//#define MILLISECONDS_PREHEAT_TIME 30000 // @section extruder @@ -736,13 +738,13 @@ //#define SENSORLESS_BACKOFF_MM { 2, 2 } // (mm) Backoff from endstops before sensorless homing -#define HOMING_BUMP_MM { 5, 5, 2 } // (mm) Backoff from endstops after first bump -#define HOMING_BUMP_DIVISOR { 2, 2, 4 } // Re-Bump Speed Divisor (Divides the Homing Feedrate) +#define HOMING_BUMP_MM { 5, 5, 5 } // (mm) Backoff from endstops after first bump +#define HOMING_BUMP_DIVISOR { 4, 4, 4 } // Re-Bump Speed Divisor (Divides the Homing Feedrate) //#define HOMING_BACKOFF_POST_MM { 2, 2, 2 } // (mm) Backoff from endstops after homing //#define QUICK_HOME // If G28 contains XY do a diagonal move first -//#define HOME_Y_BEFORE_X // If G28 contains XY home Y before X +#define HOME_Y_BEFORE_X // If G28 contains XY home Y before X //#define HOME_Z_FIRST // Home Z first. Requires a Z-MIN endstop (not a probe). //#define CODEPENDENT_XY_HOMING // If X/Y can't home without homing Y/X first @@ -867,7 +869,7 @@ // On a 300mm bed a 5% grade would give a misalignment of ~1.5cm #define G34_MAX_GRADE 5 // (%) Maximum incline that G34 will handle - #define Z_STEPPER_ALIGN_ITERATIONS 5 // Number of iterations to apply during alignment + #define Z_STEPPER_ALIGN_ITERATIONS 3 // Number of iterations to apply during alignment #define Z_STEPPER_ALIGN_ACC 0.02 // Stop iterating early if the accuracy is better than this #define RESTORE_LEVELING_AFTER_G34 // Restore leveling after G34 is done? // After G34, re-home Z (G28 Z) or just calculate it from the last probe heights? @@ -1790,20 +1792,20 @@ * * Warning: Does not respect endstops! */ -//#define BABYSTEPPING +#define BABYSTEPPING #if ENABLED(BABYSTEPPING) //#define INTEGRATED_BABYSTEPPING // EXPERIMENTAL integration of babystepping into the Stepper ISR //#define BABYSTEP_WITHOUT_HOMING - //#define BABYSTEP_ALWAYS_AVAILABLE // Allow babystepping at all times (not just during movement). + #define BABYSTEP_ALWAYS_AVAILABLE // Allow babystepping at all times (not just during movement). //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way //#define BABYSTEP_MILLIMETER_UNITS // Specify BABYSTEP_MULTIPLICATOR_(XY|Z) in mm instead of micro-steps #define BABYSTEP_MULTIPLICATOR_Z 1 // (steps or mm) Steps or millimeter distance for each Z babystep #define BABYSTEP_MULTIPLICATOR_XY 1 // (steps or mm) Steps or millimeter distance for each XY babystep - //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. + #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 2000 // Maximum interval between clicks, in milliseconds. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on doubleclick when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) @@ -1837,12 +1839,12 @@ * * See https://marlinfw.org/docs/features/lin_advance.html for full instructions. */ -//#define LIN_ADVANCE +#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants - #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed + #define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants + #define LIN_ADVANCE_K 0 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // If enabled, this will generate debug information output over USB. - //#define EXPERIMENTAL_SCURVE // Enable this option to permit S-Curve Acceleration + #define EXPERIMENTAL_SCURVE // Enable this option to permit S-Curve Acceleration #endif // @section leveling @@ -1989,13 +1991,13 @@ #define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle //#define ARC_SEGMENTS_PER_SEC 50 // Use feedrate to choose segment length (with MM_PER_ARC_SEGMENT as the minimum) #define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections - //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles - //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes + #define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles + #define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes //#define SF_ARC_FIX // Enable only if using SkeinForge with "Arc Point" fillet procedure #endif -// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes. -//#define BEZIER_CURVE_SUPPORT +// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes. - unused by most slicers +#define BEZIER_CURVE_SUPPORT /** * Direct Stepping @@ -2170,7 +2172,7 @@ //#define NO_TIMEOUTS 1000 // Milliseconds // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. -//#define ADVANCED_OK +#define ADVANCED_OK // Printrun may have trouble receiving long strings all at once. // This option inserts short delays between lines of serial output. @@ -2313,47 +2315,46 @@ */ //#define ADVANCED_PAUSE_FEATURE #if ENABLED(ADVANCED_PAUSE_FEATURE) - #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. + #define PAUSE_PARK_RETRACT_FEEDRATE 10 // (mm/s) Initial retract feedrate. #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. // This short retract is done immediately, before parking the nozzle. #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast. #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload. + #define FILAMENT_CHANGE_UNLOAD_LENGTH 450 // (mm) The length of filament for a complete unload. // For Bowden, the full length of the tube and nozzle. // For direct drive, the full length of the nozzle. // Set to 0 for manual unloading. - #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE 6 // (mm/s) Slow move when starting load. - #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 0 // (mm) Slow length, to allow time to insert material. + #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE 5 // (mm/s) Slow move when starting load. + #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 300 // (mm) Slow length, to allow time to insert material. // 0 to disable start loading and skip to fast load only - #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast. + #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 10 // (mm/s) Load filament feedrate. This can be pretty fast. #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle. + #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 300 // (mm) Load length of filament, from extruder gear to nozzle. // For Bowden, the full length of the tube and nozzle. // For direct drive, the full length of the nozzle. //#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted. - #define ADVANCED_PAUSE_PURGE_FEEDRATE 3 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate. - #define ADVANCED_PAUSE_PURGE_LENGTH 50 // (mm) Length to extrude after loading. + #define ADVANCED_PAUSE_PURGE_FEEDRATE 5 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate. + #define ADVANCED_PAUSE_PURGE_LENGTH 25 // (mm) Length to extrude after loading. // Set to 0 for manual extrusion. // Filament can be extruded repeatedly from the Filament Change menu // until extrusion is consistent, and to purge old filament. - #define ADVANCED_PAUSE_RESUME_PRIME 0 // (mm) Extra distance to prime nozzle after returning from park. - //#define ADVANCED_PAUSE_FANS_PAUSE // Turn off print-cooling fans while the machine is paused. + #define ADVANCED_PAUSE_RESUME_PRIME 1 // (mm) Extra distance to prime nozzle after returning from park. // Filament Unload does a Retract, Delay, and Purge first: - #define FILAMENT_UNLOAD_PURGE_RETRACT 13 // (mm) Unload initial retract length. + #define FILAMENT_UNLOAD_PURGE_RETRACT 20 // (mm) Unload initial retract length. #define FILAMENT_UNLOAD_PURGE_DELAY 5000 // (ms) Delay for the filament to cool after retract. - #define FILAMENT_UNLOAD_PURGE_LENGTH 8 // (mm) An unretract is done, then this length is purged. + #define FILAMENT_UNLOAD_PURGE_LENGTH 10 // (mm) An unretract is done, then this length is purged. #define FILAMENT_UNLOAD_PURGE_FEEDRATE 25 // (mm/s) feedrate to purge before unload - #define PAUSE_PARK_NOZZLE_TIMEOUT 45 // (seconds) Time limit before the nozzle is turned off for safety. + #define PAUSE_PARK_NOZZLE_TIMEOUT 60 // (seconds) Time limit before the nozzle is turned off for safety. #define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed. #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change. - //#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. - //#define HOME_BEFORE_FILAMENT_CHANGE // If needed, home before parking for filament change + #define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. + #define HOME_BEFORE_FILAMENT_CHANGE // If needed, home before parking for filament change - //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. - //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) + #define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. + #define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) #endif // @section tmc @@ -3650,9 +3651,9 @@ * Host Prompt Support enables Marlin to use the host for user prompts so * filament runout and other processes can be managed from the host side. */ -//#define HOST_ACTION_COMMANDS +#define HOST_ACTION_COMMANDS #if ENABLED(HOST_ACTION_COMMANDS) - //#define HOST_PROMPT_SUPPORT + #define HOST_PROMPT_SUPPORT //#define HOST_START_MENU_ITEM // Add a menu item that tells the host to start #endif diff --git a/config/examples/Geeetech/A30T/Configuration.h b/config/examples/Geeetech/A30T/Configuration.h index 78c2dc9160..7810f624d3 100644 --- a/config/examples/Geeetech/A30T/Configuration.h +++ b/config/examples/Geeetech/A30T/Configuration.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Geeetech/A30T" + /** * Configuration.h * @@ -102,7 +104,7 @@ * * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] */ -#define SERIAL_PORT 0 +#define SERIAL_PORT 1 /** * Select a secondary serial port on the board to use for communication with the host. @@ -134,7 +136,7 @@ // Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_RAMPS_14_EFB + #define MOTHERBOARD BOARD_GTM32_MINI_A30 #endif // Name displayed in the LCD "Ready" message and Info menu @@ -292,9 +294,9 @@ * - This implementation supports up to two mixing extruders. * - Enable DIRECT_MIXING_IN_G1 for M165 and mixing in G1 (from Pia Taubert's reference implementation). */ -//#define MIXING_EXTRUDER +#define MIXING_EXTRUDER #if ENABLED(MIXING_EXTRUDER) - #define MIXING_STEPPERS 2 // Number of steppers in your mixing extruder + #define MIXING_STEPPERS 3 // Number of steppers in your mixing extruder #define MIXING_VIRTUAL_TOOLS 16 // Use the Virtual Tool method with M163 and M164 //#define DIRECT_MIXING_IN_G1 // Allow ABCDHI mix factors in G1 movement commands //#define GRADIENT_MIX // Support for gradient mixing with M166 and LCD @@ -424,7 +426,7 @@ #define TEMP_SENSOR_5 0 #define TEMP_SENSOR_6 0 #define TEMP_SENSOR_7 0 -#define TEMP_SENSOR_BED 0 +#define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 #define TEMP_SENSOR_COOLER 0 @@ -444,11 +446,11 @@ //#define TEMP_SENSOR_1_AS_REDUNDANT #define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10 -#define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 +#define TEMP_RESIDENCY_TIME 5 // (seconds) Time to wait for hotend to "settle" in M109 #define TEMP_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer #define TEMP_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target -#define TEMP_BED_RESIDENCY_TIME 10 // (seconds) Time to wait for bed to "settle" in M190 +#define TEMP_BED_RESIDENCY_TIME 5 // (seconds) Time to wait for bed to "settle" in M190 #define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer #define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target @@ -458,15 +460,15 @@ // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. -#define HEATER_0_MINTEMP 5 -#define HEATER_1_MINTEMP 5 -#define HEATER_2_MINTEMP 5 -#define HEATER_3_MINTEMP 5 -#define HEATER_4_MINTEMP 5 -#define HEATER_5_MINTEMP 5 -#define HEATER_6_MINTEMP 5 -#define HEATER_7_MINTEMP 5 -#define BED_MINTEMP 5 +#define HEATER_0_MINTEMP 0 +#define HEATER_1_MINTEMP 0 +#define HEATER_2_MINTEMP 0 +#define HEATER_3_MINTEMP 0 +#define HEATER_4_MINTEMP 0 +#define HEATER_5_MINTEMP 0 +#define HEATER_6_MINTEMP 0 +#define HEATER_7_MINTEMP 0 +#define BED_MINTEMP 0 #define CHAMBER_MINTEMP 5 // Above this temperature the heater will be switched off. @@ -513,13 +515,13 @@ #if ENABLED(PID_PARAMS_PER_HOTEND) // Specify between 1 and HOTENDS values per array. // If fewer than EXTRUDER values are provided, the last element will be repeated. - #define DEFAULT_Kp_LIST { 22.20, 22.20 } - #define DEFAULT_Ki_LIST { 1.08, 1.08 } - #define DEFAULT_Kd_LIST { 114.00, 114.00 } + #define DEFAULT_Kp_LIST { 45.80, 45.80 } + #define DEFAULT_Ki_LIST { 3.61, 3.61 } + #define DEFAULT_Kd_LIST { 145.39, 145.39 } #else - #define DEFAULT_Kp 22.20 - #define DEFAULT_Ki 1.08 - #define DEFAULT_Kd 114.00 + #define DEFAULT_Kp 45.80 + #define DEFAULT_Ki 3.61 + #define DEFAULT_Kd 145.39 #endif #endif // PIDTEMP @@ -540,7 +542,7 @@ * heater. If your configuration is significantly different than this and you don't understand * the issues involved, don't use bed PID until someone else verifies that your hardware works. */ -//#define PIDTEMPBED +#define PIDTEMPBED //#define BED_LIMIT_SWITCHING @@ -556,13 +558,11 @@ //#define MIN_BED_POWER 0 //#define PID_BED_DEBUG // Sends debug data to the serial port. - // 120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - // from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) - #define DEFAULT_bedKp 10.00 - #define DEFAULT_bedKi .023 - #define DEFAULT_bedKd 305.4 + #define DEFAULT_bedKp 369.610 + #define DEFAULT_bedKi 54.132 + #define DEFAULT_bedKd 602.870 - // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. + // FIND YOUR OWN: "M303 E-1 C8 S60" #endif // PIDTEMPBED //=========================================================================== @@ -627,14 +627,14 @@ * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** */ #define PREVENT_COLD_EXTRUSION -#define EXTRUDE_MINTEMP 170 +#define EXTRUDE_MINTEMP 100 /** * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. * Note: For Bowden Extruders make this large enough to allow load/unload. */ #define PREVENT_LENGTHY_EXTRUDE -#define EXTRUDE_MAXLENGTH 200 +#define EXTRUDE_MAXLENGTH 1000 //=========================================================================== //======================== Thermal Runaway Protection ======================= @@ -717,13 +717,13 @@ #endif // Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define X_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_PROBE_ENDSTOP_INVERTING false // Set to true to invert the logic of the probe. +#define X_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. +#define Y_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. +#define Z_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. +#define X_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. +#define Y_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. +#define Z_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. +#define Z_MIN_PROBE_ENDSTOP_INVERTING true // set to true to invert the logic of the probe. /** * Stepper Drivers @@ -806,7 +806,7 @@ * Override with M92 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 500 } +#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 98 } /** * Default Max Feed Rate (mm/s) @@ -841,9 +841,9 @@ * M204 R Retract Acceleration * M204 T Travel Acceleration */ -#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves +#define DEFAULT_ACCELERATION 500 // X, Y, Z and E acceleration for printing moves +#define DEFAULT_RETRACT_ACCELERATION 500 // E acceleration for retracts +#define DEFAULT_TRAVEL_ACCELERATION 500 // X, Y, Z acceleration for travel (non printing) moves /** * Default Jerk limits (mm/s) @@ -890,7 +890,7 @@ * * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained */ -//#define S_CURVE_ACCELERATION +#define S_CURVE_ACCELERATION //=========================================================================== //============================= Z Probe Options ============================= @@ -940,7 +940,7 @@ * Use G29 repeatedly, adjusting the Z height at each point with movement commands * or (with LCD_BED_LEVELING) the LCD controller. */ -//#define PROBE_MANUALLY +#define PROBE_MANUALLY /** * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. @@ -1059,10 +1059,10 @@ // Most probes should stay away from the edges of the bed, but // with NOZZLE_AS_PROBE this can be negative for a wider probing area. -#define PROBING_MARGIN 10 +#define PROBING_MARGIN 0 // X and Y axis travel speed (mm/min) between probes -#define XY_PROBE_FEEDRATE (133*60) +#define XY_PROBE_FEEDRATE (50*60) // Feedrate (mm/min) for the first approach when double-probing (MULTIPLE_PROBING == 2) #define Z_PROBE_FEEDRATE_FAST (4*60) @@ -1190,21 +1190,21 @@ // @section machine // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR false +#define INVERT_X_DIR true #define INVERT_Y_DIR true #define INVERT_Z_DIR false // @section extruder // For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR false -#define INVERT_E1_DIR false -#define INVERT_E2_DIR false -#define INVERT_E3_DIR false -#define INVERT_E4_DIR false -#define INVERT_E5_DIR false -#define INVERT_E6_DIR false -#define INVERT_E7_DIR false +#define INVERT_E0_DIR true +#define INVERT_E1_DIR true +#define INVERT_E2_DIR true +#define INVERT_E3_DIR true +#define INVERT_E4_DIR true +#define INVERT_E5_DIR true +#define INVERT_E6_DIR true +#define INVERT_E7_DIR true // @section homing @@ -1218,7 +1218,7 @@ */ //#define Z_IDLE_HEIGHT Z_HOME_POS -//#define Z_HOMING_HEIGHT 4 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ... +#define Z_HOMING_HEIGHT 5 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ... // Be sure to have this much clearance over your Z_MAX_POS to prevent grinding. //#define Z_AFTER_HOMING 10 // (mm) Height to move to after homing Z @@ -1232,16 +1232,16 @@ // @section machine // The size of the printable area -#define X_BED_SIZE 200 -#define Y_BED_SIZE 200 +#define X_BED_SIZE 320 +#define Y_BED_SIZE 320 // Travel limits (mm) after homing, corresponding to endstop positions. -#define X_MIN_POS 0 -#define Y_MIN_POS 0 +#define X_MIN_POS -10 +#define Y_MIN_POS -5 #define Z_MIN_POS 0 #define X_MAX_POS X_BED_SIZE #define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 200 +#define Z_MAX_POS 420 /** * Software Endstops @@ -1269,7 +1269,7 @@ #endif #if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS) - //#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD + #define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD #endif /** @@ -1289,8 +1289,9 @@ #if ENABLED(FILAMENT_RUNOUT_SENSOR) #define FIL_RUNOUT_ENABLED_DEFAULT true // Enable the sensor on startup. Override with M412 followed by M500. #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. + #define FIL_RUNOUT_PIN 66 - #define FIL_RUNOUT_STATE LOW // Pin state indicating that filament is NOT present. + #define FIL_RUNOUT_STATE HIGH // Pin state indicating that filament is NOT present. #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. //#define WATCH_ALL_RUNOUT_SENSORS // Execute runout script on any triggering sensor, not only for the active extruder. @@ -1388,7 +1389,7 @@ //#define AUTO_BED_LEVELING_3POINT //#define AUTO_BED_LEVELING_LINEAR //#define AUTO_BED_LEVELING_BILINEAR -//#define AUTO_BED_LEVELING_UBL +#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING /** @@ -1396,7 +1397,7 @@ * these options to restore the prior leveling state or to always enable * leveling immediately after G28. */ -//#define RESTORE_LEVELING_AFTER_G28 +#define RESTORE_LEVELING_AFTER_G28 //#define ENABLE_LEVELING_AFTER_G28 /** @@ -1454,17 +1455,17 @@ #if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR) // Set the number of grid points per dimension. - #define GRID_MAX_POINTS_X 3 + #define GRID_MAX_POINTS_X 5 #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X // Probe along the Y axis, advancing X after each column - //#define PROBE_Y_FIRST + #define PROBE_Y_FIRST #if ENABLED(AUTO_BED_LEVELING_BILINEAR) // Beyond the probed grid, continue the implied tilt? // Default is to maintain the height of the nearest edge. - //#define EXTRAPOLATE_BEYOND_GRID + #define EXTRAPOLATE_BEYOND_GRID // // Experimental Subdivision of the grid by Catmull-Rom method. @@ -1486,8 +1487,8 @@ //#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh - #define MESH_INSET 1 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. + #define MESH_INSET 0 // Set Mesh bounds as an inset region of the bed + #define GRID_MAX_POINTS_X 5 // Don't use more than 15 points per axis, implementation limited. #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X //#define UBL_HILBERT_CURVE // Use Hilbert distribution for less travel when probing multiple points @@ -1495,7 +1496,7 @@ #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 - //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used + #define UBL_Z_RAISE_WHEN_OFF_MESH 0 // When the nozzle is off the mesh, this value is used // as the Z-Height correction value. //#define UBL_MESH_WIZARD // Run several commands in a row to get a complete mesh @@ -1506,7 +1507,7 @@ //=================================== Mesh ================================== //=========================================================================== - #define MESH_INSET 10 // Set Mesh bounds as an inset region of the bed + #define MESH_INSET 0 // Set Mesh bounds as an inset region of the bed #define GRID_MAX_POINTS_X 3 // Don't use more than 7 points per axis, implementation limited. #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X @@ -1672,12 +1673,12 @@ * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) */ -//#define EEPROM_SETTINGS // Persistent storage with M500 and M501 +#define EEPROM_SETTINGS // Persistent storage with M500 and M501 //#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. #define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load #if ENABLED(EEPROM_SETTINGS) - //#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. + #define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. #endif // @@ -1706,14 +1707,14 @@ // Preheat Constants - Up to 5 are supported without changes // #define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 180 -#define PREHEAT_1_TEMP_BED 70 +#define PREHEAT_1_TEMP_HOTEND 200 +#define PREHEAT_1_TEMP_BED 60 #define PREHEAT_1_TEMP_CHAMBER 35 #define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 #define PREHEAT_2_LABEL "ABS" -#define PREHEAT_2_TEMP_HOTEND 240 -#define PREHEAT_2_TEMP_BED 110 +#define PREHEAT_2_TEMP_HOTEND 250 +#define PREHEAT_2_TEMP_BED 100 #define PREHEAT_2_TEMP_CHAMBER 35 #define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 @@ -1728,11 +1729,11 @@ * P1 Raise the nozzle always to Z-park height. * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. */ -//#define NOZZLE_PARK_FEATURE +#define NOZZLE_PARK_FEATURE #if ENABLED(NOZZLE_PARK_FEATURE) // Specify a park position as { X, Y, Z_raise } - #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 } + #define NOZZLE_PARK_POINT { (X_MIN_POS + 20), (Y_MIN_POS + 20),Z_MIN_POS + 20 } //#define NOZZLE_PARK_X_ONLY // X move only is required to park //#define NOZZLE_PARK_Y_ONLY // Y move only is required to park #define NOZZLE_PARK_Z_RAISE_MIN 2 // (mm) Always raise Z by at least this distance @@ -1936,7 +1937,8 @@ * SD Card support is disabled by default. If your controller has an SD slot, * you must uncomment the following option or it won't work. */ -//#define SDSUPPORT +#define SDSUPPORT +#define SDIO_SUPPORT /** * SD CARD: ENABLE CRC @@ -2006,7 +2008,7 @@ // // Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. // -//#define INDIVIDUAL_AXIS_HOMING_MENU +#define INDIVIDUAL_AXIS_HOMING_MENU // // SPEAKER/BUZZER @@ -2014,7 +2016,7 @@ // If you have a speaker that can produce tones, enable it here. // By default Marlin assumes you have a buzzer with a fixed frequency. // -//#define SPEAKER +#define SPEAKER // // The duration and frequency for the UI feedback sound. @@ -2023,8 +2025,8 @@ // Note: Test audio output with the G-Code: // M300 S P // -//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 -//#define LCD_FEEDBACK_FREQUENCY_HZ 5000 +#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 50 +#define LCD_FEEDBACK_FREQUENCY_HZ 10 //============================================================================= //======================== LCD / Controller Selection ========================= @@ -2037,7 +2039,7 @@ // // Note: Usually sold with a white PCB. // -//#define REPRAP_DISCOUNT_SMART_CONTROLLER +#define REPRAP_DISCOUNT_SMART_CONTROLLER // // GT2560 (YHCB2004) LCD Display @@ -2196,6 +2198,9 @@ // https://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller // //#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER +//#define ST7920_DELAY_1 DELAY_NS(125) +//#define ST7920_DELAY_2 DELAY_NS(125) +//#define ST7920_DELAY_3 DELAY_NS(125) // // K.3D Full Graphic Smart Controller @@ -2618,7 +2623,7 @@ // Use software PWM to drive the fan, as for the heaters. This uses a very low frequency // which is not as annoying as with the hardware PWM. On the other hand, if this frequency // is too low, you should also increment SOFT_PWM_SCALE. -//#define FAN_SOFT_PWM +#define FAN_SOFT_PWM // Incrementing this by 1 will double the software PWM frequency, // affecting heaters, and the fan if FAN_SOFT_PWM is enabled. diff --git a/config/examples/Geeetech/A30T/Configuration_adv.h b/config/examples/Geeetech/A30T/Configuration_adv.h index 5335fa012a..21a71c7392 100644 --- a/config/examples/Geeetech/A30T/Configuration_adv.h +++ b/config/examples/Geeetech/A30T/Configuration_adv.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Geeetech/A30T" + /** * Configuration_adv.h * @@ -307,7 +309,7 @@ #if ENABLED(PIDTEMP) // Add an experimental additional term to the heater power, proportional to the extrusion speed. // A well-chosen Kc value should add just enough power to melt the increased material volume. - //#define PID_EXTRUSION_SCALING + #define PID_EXTRUSION_SCALING #if ENABLED(PID_EXTRUSION_SCALING) #define DEFAULT_Kc (100) // heating power = Kc * e_speed #define LPQ_MAX_LEN 50 @@ -341,7 +343,7 @@ * 5. Enable PID_FAN_SCALING_ALTERNATIVE_DEFINITION and enter the two identified Kf-values in * PID_FAN_SCALING_AT_FULL_SPEED and PID_FAN_SCALING_AT_MIN_SPEED. Enter the minimum speed in PID_FAN_SCALING_MIN_SPEED */ - //#define PID_FAN_SCALING + #define PID_FAN_SCALING #if ENABLED(PID_FAN_SCALING) //#define PID_FAN_SCALING_ALTERNATIVE_DEFINITION #if ENABLED(PID_FAN_SCALING_ALTERNATIVE_DEFINITION) @@ -411,14 +413,14 @@ // The number of consecutive low temperature errors that can occur // before a min_temp_error is triggered. (Shouldn't be more than 10.) -//#define MAX_CONSECUTIVE_LOW_TEMPERATURE_ERROR_ALLOWED 0 +//#define MAX_CONSECUTIVE_LOW_TEMPERATURE_ERROR_ALLOWED 10 // The number of milliseconds a hotend will preheat before starting to check // the temperature. This value should NOT be set to the time it takes the // hot end to reach the target temperature, but the time it takes to reach // the minimum temperature your thermistor can read. The lower the better/safer. // This shouldn't need to be more than 30 seconds (30000) -//#define MILLISECONDS_PREHEAT_TIME 0 +//#define MILLISECONDS_PREHEAT_TIME 30000 // @section extruder @@ -736,13 +738,13 @@ //#define SENSORLESS_BACKOFF_MM { 2, 2 } // (mm) Backoff from endstops before sensorless homing -#define HOMING_BUMP_MM { 5, 5, 2 } // (mm) Backoff from endstops after first bump -#define HOMING_BUMP_DIVISOR { 2, 2, 4 } // Re-Bump Speed Divisor (Divides the Homing Feedrate) +#define HOMING_BUMP_MM { 5, 5, 5 } // (mm) Backoff from endstops after first bump +#define HOMING_BUMP_DIVISOR { 4, 4, 4 } // Re-Bump Speed Divisor (Divides the Homing Feedrate) //#define HOMING_BACKOFF_POST_MM { 2, 2, 2 } // (mm) Backoff from endstops after homing //#define QUICK_HOME // If G28 contains XY do a diagonal move first -//#define HOME_Y_BEFORE_X // If G28 contains XY home Y before X +#define HOME_Y_BEFORE_X // If G28 contains XY home Y before X //#define HOME_Z_FIRST // Home Z first. Requires a Z-MIN endstop (not a probe). //#define CODEPENDENT_XY_HOMING // If X/Y can't home without homing Y/X first @@ -867,7 +869,7 @@ // On a 300mm bed a 5% grade would give a misalignment of ~1.5cm #define G34_MAX_GRADE 5 // (%) Maximum incline that G34 will handle - #define Z_STEPPER_ALIGN_ITERATIONS 5 // Number of iterations to apply during alignment + #define Z_STEPPER_ALIGN_ITERATIONS 3 // Number of iterations to apply during alignment #define Z_STEPPER_ALIGN_ACC 0.02 // Stop iterating early if the accuracy is better than this #define RESTORE_LEVELING_AFTER_G34 // Restore leveling after G34 is done? // After G34, re-home Z (G28 Z) or just calculate it from the last probe heights? @@ -1790,20 +1792,20 @@ * * Warning: Does not respect endstops! */ -//#define BABYSTEPPING +#define BABYSTEPPING #if ENABLED(BABYSTEPPING) //#define INTEGRATED_BABYSTEPPING // EXPERIMENTAL integration of babystepping into the Stepper ISR //#define BABYSTEP_WITHOUT_HOMING - //#define BABYSTEP_ALWAYS_AVAILABLE // Allow babystepping at all times (not just during movement). + #define BABYSTEP_ALWAYS_AVAILABLE // Allow babystepping at all times (not just during movement). //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way //#define BABYSTEP_MILLIMETER_UNITS // Specify BABYSTEP_MULTIPLICATOR_(XY|Z) in mm instead of micro-steps #define BABYSTEP_MULTIPLICATOR_Z 1 // (steps or mm) Steps or millimeter distance for each Z babystep #define BABYSTEP_MULTIPLICATOR_XY 1 // (steps or mm) Steps or millimeter distance for each XY babystep - //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. + #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 2000 // Maximum interval between clicks, in milliseconds. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on doubleclick when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) @@ -1837,12 +1839,12 @@ * * See https://marlinfw.org/docs/features/lin_advance.html for full instructions. */ -//#define LIN_ADVANCE +#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants - #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed + #define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants + #define LIN_ADVANCE_K 0 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // If enabled, this will generate debug information output over USB. - //#define EXPERIMENTAL_SCURVE // Enable this option to permit S-Curve Acceleration + #define EXPERIMENTAL_SCURVE // Enable this option to permit S-Curve Acceleration #endif // @section leveling @@ -1989,13 +1991,13 @@ #define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle //#define ARC_SEGMENTS_PER_SEC 50 // Use feedrate to choose segment length (with MM_PER_ARC_SEGMENT as the minimum) #define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections - //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles - //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes + #define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles + #define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes //#define SF_ARC_FIX // Enable only if using SkeinForge with "Arc Point" fillet procedure #endif -// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes. -//#define BEZIER_CURVE_SUPPORT +// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes. - unused by most slicers +#define BEZIER_CURVE_SUPPORT /** * Direct Stepping @@ -2170,7 +2172,7 @@ //#define NO_TIMEOUTS 1000 // Milliseconds // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. -//#define ADVANCED_OK +#define ADVANCED_OK // Printrun may have trouble receiving long strings all at once. // This option inserts short delays between lines of serial output. @@ -2313,47 +2315,46 @@ */ //#define ADVANCED_PAUSE_FEATURE #if ENABLED(ADVANCED_PAUSE_FEATURE) - #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. + #define PAUSE_PARK_RETRACT_FEEDRATE 10 // (mm/s) Initial retract feedrate. #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. // This short retract is done immediately, before parking the nozzle. #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast. #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload. + #define FILAMENT_CHANGE_UNLOAD_LENGTH 450 // (mm) The length of filament for a complete unload. // For Bowden, the full length of the tube and nozzle. // For direct drive, the full length of the nozzle. // Set to 0 for manual unloading. - #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE 6 // (mm/s) Slow move when starting load. - #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 0 // (mm) Slow length, to allow time to insert material. + #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE 5 // (mm/s) Slow move when starting load. + #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 300 // (mm) Slow length, to allow time to insert material. // 0 to disable start loading and skip to fast load only - #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast. + #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 10 // (mm/s) Load filament feedrate. This can be pretty fast. #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle. + #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 300 // (mm) Load length of filament, from extruder gear to nozzle. // For Bowden, the full length of the tube and nozzle. // For direct drive, the full length of the nozzle. //#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted. - #define ADVANCED_PAUSE_PURGE_FEEDRATE 3 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate. - #define ADVANCED_PAUSE_PURGE_LENGTH 50 // (mm) Length to extrude after loading. + #define ADVANCED_PAUSE_PURGE_FEEDRATE 5 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate. + #define ADVANCED_PAUSE_PURGE_LENGTH 25 // (mm) Length to extrude after loading. // Set to 0 for manual extrusion. // Filament can be extruded repeatedly from the Filament Change menu // until extrusion is consistent, and to purge old filament. - #define ADVANCED_PAUSE_RESUME_PRIME 0 // (mm) Extra distance to prime nozzle after returning from park. - //#define ADVANCED_PAUSE_FANS_PAUSE // Turn off print-cooling fans while the machine is paused. + #define ADVANCED_PAUSE_RESUME_PRIME 1 // (mm) Extra distance to prime nozzle after returning from park. // Filament Unload does a Retract, Delay, and Purge first: - #define FILAMENT_UNLOAD_PURGE_RETRACT 13 // (mm) Unload initial retract length. + #define FILAMENT_UNLOAD_PURGE_RETRACT 20 // (mm) Unload initial retract length. #define FILAMENT_UNLOAD_PURGE_DELAY 5000 // (ms) Delay for the filament to cool after retract. - #define FILAMENT_UNLOAD_PURGE_LENGTH 8 // (mm) An unretract is done, then this length is purged. + #define FILAMENT_UNLOAD_PURGE_LENGTH 10 // (mm) An unretract is done, then this length is purged. #define FILAMENT_UNLOAD_PURGE_FEEDRATE 25 // (mm/s) feedrate to purge before unload - #define PAUSE_PARK_NOZZLE_TIMEOUT 45 // (seconds) Time limit before the nozzle is turned off for safety. + #define PAUSE_PARK_NOZZLE_TIMEOUT 60 // (seconds) Time limit before the nozzle is turned off for safety. #define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed. #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change. - //#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. - //#define HOME_BEFORE_FILAMENT_CHANGE // If needed, home before parking for filament change + #define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. + #define HOME_BEFORE_FILAMENT_CHANGE // If needed, home before parking for filament change - //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. - //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) + #define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. + #define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) #endif // @section tmc @@ -3650,9 +3651,9 @@ * Host Prompt Support enables Marlin to use the host for user prompts so * filament runout and other processes can be managed from the host side. */ -//#define HOST_ACTION_COMMANDS +#define HOST_ACTION_COMMANDS #if ENABLED(HOST_ACTION_COMMANDS) - //#define HOST_PROMPT_SUPPORT + #define HOST_PROMPT_SUPPORT //#define HOST_START_MENU_ITEM // Add a menu item that tells the host to start #endif diff --git a/config/examples/Geeetech/D200/Configuration.h b/config/examples/Geeetech/D200/Configuration.h index 78c2dc9160..a0986dfeb5 100644 --- a/config/examples/Geeetech/D200/Configuration.h +++ b/config/examples/Geeetech/D200/Configuration.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Geeetech/D200" + /** * Configuration.h * @@ -102,7 +104,7 @@ * * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] */ -#define SERIAL_PORT 0 +#define SERIAL_PORT 1 /** * Select a secondary serial port on the board to use for communication with the host. @@ -134,7 +136,7 @@ // Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_RAMPS_14_EFB + #define MOTHERBOARD BOARD_GTM32_MINI_A30 #endif // Name displayed in the LCD "Ready" message and Info menu @@ -424,7 +426,7 @@ #define TEMP_SENSOR_5 0 #define TEMP_SENSOR_6 0 #define TEMP_SENSOR_7 0 -#define TEMP_SENSOR_BED 0 +#define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 #define TEMP_SENSOR_COOLER 0 @@ -444,11 +446,11 @@ //#define TEMP_SENSOR_1_AS_REDUNDANT #define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10 -#define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 +#define TEMP_RESIDENCY_TIME 5 // (seconds) Time to wait for hotend to "settle" in M109 #define TEMP_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer #define TEMP_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target -#define TEMP_BED_RESIDENCY_TIME 10 // (seconds) Time to wait for bed to "settle" in M190 +#define TEMP_BED_RESIDENCY_TIME 5 // (seconds) Time to wait for bed to "settle" in M190 #define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer #define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target @@ -458,15 +460,15 @@ // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. -#define HEATER_0_MINTEMP 5 -#define HEATER_1_MINTEMP 5 -#define HEATER_2_MINTEMP 5 -#define HEATER_3_MINTEMP 5 -#define HEATER_4_MINTEMP 5 -#define HEATER_5_MINTEMP 5 -#define HEATER_6_MINTEMP 5 -#define HEATER_7_MINTEMP 5 -#define BED_MINTEMP 5 +#define HEATER_0_MINTEMP 0 +#define HEATER_1_MINTEMP 0 +#define HEATER_2_MINTEMP 0 +#define HEATER_3_MINTEMP 0 +#define HEATER_4_MINTEMP 0 +#define HEATER_5_MINTEMP 0 +#define HEATER_6_MINTEMP 0 +#define HEATER_7_MINTEMP 0 +#define BED_MINTEMP 0 #define CHAMBER_MINTEMP 5 // Above this temperature the heater will be switched off. @@ -513,13 +515,13 @@ #if ENABLED(PID_PARAMS_PER_HOTEND) // Specify between 1 and HOTENDS values per array. // If fewer than EXTRUDER values are provided, the last element will be repeated. - #define DEFAULT_Kp_LIST { 22.20, 22.20 } - #define DEFAULT_Ki_LIST { 1.08, 1.08 } - #define DEFAULT_Kd_LIST { 114.00, 114.00 } + #define DEFAULT_Kp_LIST { 45.80, 45.80 } + #define DEFAULT_Ki_LIST { 3.61, 3.61 } + #define DEFAULT_Kd_LIST { 145.39, 145.39 } #else - #define DEFAULT_Kp 22.20 - #define DEFAULT_Ki 1.08 - #define DEFAULT_Kd 114.00 + #define DEFAULT_Kp 45.80 + #define DEFAULT_Ki 3.61 + #define DEFAULT_Kd 145.39 #endif #endif // PIDTEMP @@ -540,7 +542,7 @@ * heater. If your configuration is significantly different than this and you don't understand * the issues involved, don't use bed PID until someone else verifies that your hardware works. */ -//#define PIDTEMPBED +#define PIDTEMPBED //#define BED_LIMIT_SWITCHING @@ -556,11 +558,9 @@ //#define MIN_BED_POWER 0 //#define PID_BED_DEBUG // Sends debug data to the serial port. - // 120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - // from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) - #define DEFAULT_bedKp 10.00 - #define DEFAULT_bedKi .023 - #define DEFAULT_bedKd 305.4 + #define DEFAULT_bedKp 369.610 + #define DEFAULT_bedKi 54.132 + #define DEFAULT_bedKd 602.870 // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. #endif // PIDTEMPBED @@ -627,14 +627,14 @@ * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** */ #define PREVENT_COLD_EXTRUSION -#define EXTRUDE_MINTEMP 170 +#define EXTRUDE_MINTEMP 100 /** * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. * Note: For Bowden Extruders make this large enough to allow load/unload. */ #define PREVENT_LENGTHY_EXTRUDE -#define EXTRUDE_MAXLENGTH 200 +#define EXTRUDE_MAXLENGTH 1000 //=========================================================================== //======================== Thermal Runaway Protection ======================= @@ -717,13 +717,13 @@ #endif // Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define X_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_PROBE_ENDSTOP_INVERTING false // Set to true to invert the logic of the probe. +#define X_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. +#define Y_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. +#define Z_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. +#define X_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. +#define Y_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. +#define Z_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. +#define Z_MIN_PROBE_ENDSTOP_INVERTING true // set to true to invert the logic of the probe. /** * Stepper Drivers @@ -806,7 +806,7 @@ * Override with M92 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 500 } +#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 98 } /** * Default Max Feed Rate (mm/s) @@ -841,9 +841,9 @@ * M204 R Retract Acceleration * M204 T Travel Acceleration */ -#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves +#define DEFAULT_ACCELERATION 500 // X, Y, Z and E acceleration for printing moves +#define DEFAULT_RETRACT_ACCELERATION 500 // E acceleration for retracts +#define DEFAULT_TRAVEL_ACCELERATION 500 // X, Y, Z acceleration for travel (non printing) moves /** * Default Jerk limits (mm/s) @@ -890,7 +890,7 @@ * * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained */ -//#define S_CURVE_ACCELERATION +#define S_CURVE_ACCELERATION //=========================================================================== //============================= Z Probe Options ============================= @@ -940,7 +940,7 @@ * Use G29 repeatedly, adjusting the Z height at each point with movement commands * or (with LCD_BED_LEVELING) the LCD controller. */ -//#define PROBE_MANUALLY +#define PROBE_MANUALLY /** * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. @@ -1059,10 +1059,10 @@ // Most probes should stay away from the edges of the bed, but // with NOZZLE_AS_PROBE this can be negative for a wider probing area. -#define PROBING_MARGIN 10 +#define PROBING_MARGIN 0 // X and Y axis travel speed (mm/min) between probes -#define XY_PROBE_FEEDRATE (133*60) +#define XY_PROBE_FEEDRATE (50*60) // Feedrate (mm/min) for the first approach when double-probing (MULTIPLE_PROBING == 2) #define Z_PROBE_FEEDRATE_FAST (4*60) @@ -1190,21 +1190,21 @@ // @section machine // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR false +#define INVERT_X_DIR true #define INVERT_Y_DIR true #define INVERT_Z_DIR false // @section extruder // For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR false -#define INVERT_E1_DIR false -#define INVERT_E2_DIR false -#define INVERT_E3_DIR false -#define INVERT_E4_DIR false -#define INVERT_E5_DIR false -#define INVERT_E6_DIR false -#define INVERT_E7_DIR false +#define INVERT_E0_DIR true +#define INVERT_E1_DIR true +#define INVERT_E2_DIR true +#define INVERT_E3_DIR true +#define INVERT_E4_DIR true +#define INVERT_E5_DIR true +#define INVERT_E6_DIR true +#define INVERT_E7_DIR true // @section homing @@ -1218,7 +1218,7 @@ */ //#define Z_IDLE_HEIGHT Z_HOME_POS -//#define Z_HOMING_HEIGHT 4 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ... +#define Z_HOMING_HEIGHT 5 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ... // Be sure to have this much clearance over your Z_MAX_POS to prevent grinding. //#define Z_AFTER_HOMING 10 // (mm) Height to move to after homing Z @@ -1232,8 +1232,8 @@ // @section machine // The size of the printable area -#define X_BED_SIZE 200 -#define Y_BED_SIZE 200 +#define X_BED_SIZE 300 +#define Y_BED_SIZE 180 // Travel limits (mm) after homing, corresponding to endstop positions. #define X_MIN_POS 0 @@ -1241,7 +1241,7 @@ #define Z_MIN_POS 0 #define X_MAX_POS X_BED_SIZE #define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 200 +#define Z_MAX_POS 180 /** * Software Endstops @@ -1269,7 +1269,7 @@ #endif #if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS) - //#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD + #define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD #endif /** @@ -1289,8 +1289,9 @@ #if ENABLED(FILAMENT_RUNOUT_SENSOR) #define FIL_RUNOUT_ENABLED_DEFAULT true // Enable the sensor on startup. Override with M412 followed by M500. #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. + #define FIL_RUNOUT_PIN 66 - #define FIL_RUNOUT_STATE LOW // Pin state indicating that filament is NOT present. + #define FIL_RUNOUT_STATE HIGH // Pin state indicating that filament is NOT present. #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. //#define WATCH_ALL_RUNOUT_SENSORS // Execute runout script on any triggering sensor, not only for the active extruder. @@ -1388,7 +1389,7 @@ //#define AUTO_BED_LEVELING_3POINT //#define AUTO_BED_LEVELING_LINEAR //#define AUTO_BED_LEVELING_BILINEAR -//#define AUTO_BED_LEVELING_UBL +#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING /** @@ -1396,7 +1397,7 @@ * these options to restore the prior leveling state or to always enable * leveling immediately after G28. */ -//#define RESTORE_LEVELING_AFTER_G28 +#define RESTORE_LEVELING_AFTER_G28 //#define ENABLE_LEVELING_AFTER_G28 /** @@ -1454,17 +1455,17 @@ #if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR) // Set the number of grid points per dimension. - #define GRID_MAX_POINTS_X 3 + #define GRID_MAX_POINTS_X 5 #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X // Probe along the Y axis, advancing X after each column - //#define PROBE_Y_FIRST + #define PROBE_Y_FIRST #if ENABLED(AUTO_BED_LEVELING_BILINEAR) // Beyond the probed grid, continue the implied tilt? // Default is to maintain the height of the nearest edge. - //#define EXTRAPOLATE_BEYOND_GRID + #define EXTRAPOLATE_BEYOND_GRID // // Experimental Subdivision of the grid by Catmull-Rom method. @@ -1486,8 +1487,8 @@ //#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh - #define MESH_INSET 1 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. + #define MESH_INSET 0 // Set Mesh bounds as an inset region of the bed + #define GRID_MAX_POINTS_X 5 // Don't use more than 15 points per axis, implementation limited. #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X //#define UBL_HILBERT_CURVE // Use Hilbert distribution for less travel when probing multiple points @@ -1495,7 +1496,7 @@ #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 - //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used + #define UBL_Z_RAISE_WHEN_OFF_MESH 0 // When the nozzle is off the mesh, this value is used // as the Z-Height correction value. //#define UBL_MESH_WIZARD // Run several commands in a row to get a complete mesh @@ -1506,7 +1507,7 @@ //=================================== Mesh ================================== //=========================================================================== - #define MESH_INSET 10 // Set Mesh bounds as an inset region of the bed + #define MESH_INSET 0 // Set Mesh bounds as an inset region of the bed #define GRID_MAX_POINTS_X 3 // Don't use more than 7 points per axis, implementation limited. #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X @@ -1672,12 +1673,12 @@ * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) */ -//#define EEPROM_SETTINGS // Persistent storage with M500 and M501 +#define EEPROM_SETTINGS // Persistent storage with M500 and M501 //#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. #define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load #if ENABLED(EEPROM_SETTINGS) - //#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. + #define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. #endif // @@ -1706,14 +1707,14 @@ // Preheat Constants - Up to 5 are supported without changes // #define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 180 -#define PREHEAT_1_TEMP_BED 70 +#define PREHEAT_1_TEMP_HOTEND 200 +#define PREHEAT_1_TEMP_BED 60 #define PREHEAT_1_TEMP_CHAMBER 35 #define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 #define PREHEAT_2_LABEL "ABS" -#define PREHEAT_2_TEMP_HOTEND 240 -#define PREHEAT_2_TEMP_BED 110 +#define PREHEAT_2_TEMP_HOTEND 250 +#define PREHEAT_2_TEMP_BED 100 #define PREHEAT_2_TEMP_CHAMBER 35 #define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 @@ -1728,11 +1729,11 @@ * P1 Raise the nozzle always to Z-park height. * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. */ -//#define NOZZLE_PARK_FEATURE +#define NOZZLE_PARK_FEATURE #if ENABLED(NOZZLE_PARK_FEATURE) // Specify a park position as { X, Y, Z_raise } - #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 } + #define NOZZLE_PARK_POINT { (X_MIN_POS + 20), (Y_MIN_POS + 20),Z_MIN_POS + 20 } //#define NOZZLE_PARK_X_ONLY // X move only is required to park //#define NOZZLE_PARK_Y_ONLY // Y move only is required to park #define NOZZLE_PARK_Z_RAISE_MIN 2 // (mm) Always raise Z by at least this distance @@ -1936,7 +1937,8 @@ * SD Card support is disabled by default. If your controller has an SD slot, * you must uncomment the following option or it won't work. */ -//#define SDSUPPORT +#define SDSUPPORT +#define SDIO_SUPPORT /** * SD CARD: ENABLE CRC @@ -2006,7 +2008,7 @@ // // Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. // -//#define INDIVIDUAL_AXIS_HOMING_MENU +#define INDIVIDUAL_AXIS_HOMING_MENU // // SPEAKER/BUZZER @@ -2014,7 +2016,7 @@ // If you have a speaker that can produce tones, enable it here. // By default Marlin assumes you have a buzzer with a fixed frequency. // -//#define SPEAKER +#define SPEAKER // // The duration and frequency for the UI feedback sound. @@ -2023,8 +2025,8 @@ // Note: Test audio output with the G-Code: // M300 S P // -//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 -//#define LCD_FEEDBACK_FREQUENCY_HZ 5000 +#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 50 +#define LCD_FEEDBACK_FREQUENCY_HZ 10 //============================================================================= //======================== LCD / Controller Selection ========================= @@ -2037,7 +2039,7 @@ // // Note: Usually sold with a white PCB. // -//#define REPRAP_DISCOUNT_SMART_CONTROLLER +#define REPRAP_DISCOUNT_SMART_CONTROLLER // // GT2560 (YHCB2004) LCD Display @@ -2196,6 +2198,9 @@ // https://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller // //#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER +//#define ST7920_DELAY_1 DELAY_NS(125) +//#define ST7920_DELAY_2 DELAY_NS(125) +//#define ST7920_DELAY_3 DELAY_NS(125) // // K.3D Full Graphic Smart Controller @@ -2618,7 +2623,7 @@ // Use software PWM to drive the fan, as for the heaters. This uses a very low frequency // which is not as annoying as with the hardware PWM. On the other hand, if this frequency // is too low, you should also increment SOFT_PWM_SCALE. -//#define FAN_SOFT_PWM +#define FAN_SOFT_PWM // Incrementing this by 1 will double the software PWM frequency, // affecting heaters, and the fan if FAN_SOFT_PWM is enabled. diff --git a/config/examples/Geeetech/D200/Configuration_adv.h b/config/examples/Geeetech/D200/Configuration_adv.h index 5335fa012a..d8e28ec7d2 100644 --- a/config/examples/Geeetech/D200/Configuration_adv.h +++ b/config/examples/Geeetech/D200/Configuration_adv.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Geeetech/D200" + /** * Configuration_adv.h * @@ -307,7 +309,7 @@ #if ENABLED(PIDTEMP) // Add an experimental additional term to the heater power, proportional to the extrusion speed. // A well-chosen Kc value should add just enough power to melt the increased material volume. - //#define PID_EXTRUSION_SCALING + #define PID_EXTRUSION_SCALING #if ENABLED(PID_EXTRUSION_SCALING) #define DEFAULT_Kc (100) // heating power = Kc * e_speed #define LPQ_MAX_LEN 50 @@ -341,7 +343,7 @@ * 5. Enable PID_FAN_SCALING_ALTERNATIVE_DEFINITION and enter the two identified Kf-values in * PID_FAN_SCALING_AT_FULL_SPEED and PID_FAN_SCALING_AT_MIN_SPEED. Enter the minimum speed in PID_FAN_SCALING_MIN_SPEED */ - //#define PID_FAN_SCALING + #define PID_FAN_SCALING #if ENABLED(PID_FAN_SCALING) //#define PID_FAN_SCALING_ALTERNATIVE_DEFINITION #if ENABLED(PID_FAN_SCALING_ALTERNATIVE_DEFINITION) @@ -411,14 +413,14 @@ // The number of consecutive low temperature errors that can occur // before a min_temp_error is triggered. (Shouldn't be more than 10.) -//#define MAX_CONSECUTIVE_LOW_TEMPERATURE_ERROR_ALLOWED 0 +//#define MAX_CONSECUTIVE_LOW_TEMPERATURE_ERROR_ALLOWED 10 // The number of milliseconds a hotend will preheat before starting to check // the temperature. This value should NOT be set to the time it takes the // hot end to reach the target temperature, but the time it takes to reach // the minimum temperature your thermistor can read. The lower the better/safer. // This shouldn't need to be more than 30 seconds (30000) -//#define MILLISECONDS_PREHEAT_TIME 0 +//#define MILLISECONDS_PREHEAT_TIME 30000 // @section extruder @@ -736,13 +738,13 @@ //#define SENSORLESS_BACKOFF_MM { 2, 2 } // (mm) Backoff from endstops before sensorless homing -#define HOMING_BUMP_MM { 5, 5, 2 } // (mm) Backoff from endstops after first bump -#define HOMING_BUMP_DIVISOR { 2, 2, 4 } // Re-Bump Speed Divisor (Divides the Homing Feedrate) +#define HOMING_BUMP_MM { 5, 5, 5 } // (mm) Backoff from endstops after first bump +#define HOMING_BUMP_DIVISOR { 4, 4, 4 } // Re-Bump Speed Divisor (Divides the Homing Feedrate) //#define HOMING_BACKOFF_POST_MM { 2, 2, 2 } // (mm) Backoff from endstops after homing //#define QUICK_HOME // If G28 contains XY do a diagonal move first -//#define HOME_Y_BEFORE_X // If G28 contains XY home Y before X +#define HOME_Y_BEFORE_X // If G28 contains XY home Y before X //#define HOME_Z_FIRST // Home Z first. Requires a Z-MIN endstop (not a probe). //#define CODEPENDENT_XY_HOMING // If X/Y can't home without homing Y/X first @@ -826,7 +828,7 @@ // Define probe X and Y positions for Z1, Z2 [, Z3 [, Z4]] // If not defined, probe limits will be used. // Override with 'M422 S X Y' - //#define Z_STEPPER_ALIGN_XY { { 10, 190 }, { 100, 10 }, { 190, 190 } } + //#define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } /** * Orientation for the automatically-calculated probe positions. @@ -867,7 +869,7 @@ // On a 300mm bed a 5% grade would give a misalignment of ~1.5cm #define G34_MAX_GRADE 5 // (%) Maximum incline that G34 will handle - #define Z_STEPPER_ALIGN_ITERATIONS 5 // Number of iterations to apply during alignment + #define Z_STEPPER_ALIGN_ITERATIONS 3 // Number of iterations to apply during alignment #define Z_STEPPER_ALIGN_ACC 0.02 // Stop iterating early if the accuracy is better than this #define RESTORE_LEVELING_AFTER_G34 // Restore leveling after G34 is done? // After G34, re-home Z (G28 Z) or just calculate it from the last probe heights? @@ -1790,20 +1792,20 @@ * * Warning: Does not respect endstops! */ -//#define BABYSTEPPING +#define BABYSTEPPING #if ENABLED(BABYSTEPPING) //#define INTEGRATED_BABYSTEPPING // EXPERIMENTAL integration of babystepping into the Stepper ISR //#define BABYSTEP_WITHOUT_HOMING - //#define BABYSTEP_ALWAYS_AVAILABLE // Allow babystepping at all times (not just during movement). + #define BABYSTEP_ALWAYS_AVAILABLE // Allow babystepping at all times (not just during movement). //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way //#define BABYSTEP_MILLIMETER_UNITS // Specify BABYSTEP_MULTIPLICATOR_(XY|Z) in mm instead of micro-steps #define BABYSTEP_MULTIPLICATOR_Z 1 // (steps or mm) Steps or millimeter distance for each Z babystep #define BABYSTEP_MULTIPLICATOR_XY 1 // (steps or mm) Steps or millimeter distance for each XY babystep - //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. + #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 2000 // Maximum interval between clicks, in milliseconds. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on doubleclick when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) @@ -1837,12 +1839,12 @@ * * See https://marlinfw.org/docs/features/lin_advance.html for full instructions. */ -//#define LIN_ADVANCE +#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants - #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed + #define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants + #define LIN_ADVANCE_K 0 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // If enabled, this will generate debug information output over USB. - //#define EXPERIMENTAL_SCURVE // Enable this option to permit S-Curve Acceleration + #define EXPERIMENTAL_SCURVE // Enable this option to permit S-Curve Acceleration #endif // @section leveling @@ -1989,13 +1991,13 @@ #define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle //#define ARC_SEGMENTS_PER_SEC 50 // Use feedrate to choose segment length (with MM_PER_ARC_SEGMENT as the minimum) #define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections - //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles - //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes + #define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles + #define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes //#define SF_ARC_FIX // Enable only if using SkeinForge with "Arc Point" fillet procedure #endif -// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes. -//#define BEZIER_CURVE_SUPPORT +// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes. - unused by most slicers +#define BEZIER_CURVE_SUPPORT /** * Direct Stepping @@ -2170,7 +2172,7 @@ //#define NO_TIMEOUTS 1000 // Milliseconds // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. -//#define ADVANCED_OK +#define ADVANCED_OK // Printrun may have trouble receiving long strings all at once. // This option inserts short delays between lines of serial output. @@ -2313,47 +2315,47 @@ */ //#define ADVANCED_PAUSE_FEATURE #if ENABLED(ADVANCED_PAUSE_FEATURE) - #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. + #define PAUSE_PARK_RETRACT_FEEDRATE 10 // (mm/s) Initial retract feedrate. #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. // This short retract is done immediately, before parking the nozzle. #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast. #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload. + #define FILAMENT_CHANGE_UNLOAD_LENGTH 450 // (mm) The length of filament for a complete unload. // For Bowden, the full length of the tube and nozzle. // For direct drive, the full length of the nozzle. // Set to 0 for manual unloading. - #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE 6 // (mm/s) Slow move when starting load. - #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 0 // (mm) Slow length, to allow time to insert material. + #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE 5 // (mm/s) Slow move when starting load. + #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 300 // (mm) Slow length, to allow time to insert material. // 0 to disable start loading and skip to fast load only - #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast. + #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 10 // (mm/s) Load filament feedrate. This can be pretty fast. #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle. + #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 300 // (mm) Load length of filament, from extruder gear to nozzle. // For Bowden, the full length of the tube and nozzle. // For direct drive, the full length of the nozzle. //#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted. - #define ADVANCED_PAUSE_PURGE_FEEDRATE 3 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate. - #define ADVANCED_PAUSE_PURGE_LENGTH 50 // (mm) Length to extrude after loading. + #define ADVANCED_PAUSE_PURGE_FEEDRATE 5 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate. + #define ADVANCED_PAUSE_PURGE_LENGTH 25 // (mm) Length to extrude after loading. // Set to 0 for manual extrusion. // Filament can be extruded repeatedly from the Filament Change menu // until extrusion is consistent, and to purge old filament. - #define ADVANCED_PAUSE_RESUME_PRIME 0 // (mm) Extra distance to prime nozzle after returning from park. + #define ADVANCED_PAUSE_RESUME_PRIME 1 // (mm) Extra distance to prime nozzle after returning from park. //#define ADVANCED_PAUSE_FANS_PAUSE // Turn off print-cooling fans while the machine is paused. // Filament Unload does a Retract, Delay, and Purge first: - #define FILAMENT_UNLOAD_PURGE_RETRACT 13 // (mm) Unload initial retract length. + #define FILAMENT_UNLOAD_PURGE_RETRACT 20 // (mm) Unload initial retract length. #define FILAMENT_UNLOAD_PURGE_DELAY 5000 // (ms) Delay for the filament to cool after retract. - #define FILAMENT_UNLOAD_PURGE_LENGTH 8 // (mm) An unretract is done, then this length is purged. + #define FILAMENT_UNLOAD_PURGE_LENGTH 10 // (mm) An unretract is done, then this length is purged. #define FILAMENT_UNLOAD_PURGE_FEEDRATE 25 // (mm/s) feedrate to purge before unload - #define PAUSE_PARK_NOZZLE_TIMEOUT 45 // (seconds) Time limit before the nozzle is turned off for safety. + #define PAUSE_PARK_NOZZLE_TIMEOUT 60 // (seconds) Time limit before the nozzle is turned off for safety. #define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed. #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change. - //#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. - //#define HOME_BEFORE_FILAMENT_CHANGE // If needed, home before parking for filament change + #define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. + #define HOME_BEFORE_FILAMENT_CHANGE // If needed, home before parking for filament change - //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. - //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) + #define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. + #define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) #endif // @section tmc @@ -3650,9 +3652,9 @@ * Host Prompt Support enables Marlin to use the host for user prompts so * filament runout and other processes can be managed from the host side. */ -//#define HOST_ACTION_COMMANDS +#define HOST_ACTION_COMMANDS #if ENABLED(HOST_ACTION_COMMANDS) - //#define HOST_PROMPT_SUPPORT + #define HOST_PROMPT_SUPPORT //#define HOST_START_MENU_ITEM // Add a menu item that tells the host to start #endif diff --git a/config/examples/Geeetech/Duplicator5/Configuration.h b/config/examples/Geeetech/Duplicator5/Configuration.h index 78c2dc9160..352e7ca10e 100644 --- a/config/examples/Geeetech/Duplicator5/Configuration.h +++ b/config/examples/Geeetech/Duplicator5/Configuration.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Geeetech/Duplicator5" + /** * Configuration.h * @@ -134,7 +136,7 @@ // Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_RAMPS_14_EFB + #define MOTHERBOARD BOARD_GT2560_V3 #endif // Name displayed in the LCD "Ready" message and Info menu @@ -148,7 +150,7 @@ // This defines the number of extruders // :[0, 1, 2, 3, 4, 5, 6, 7, 8] -#define EXTRUDERS 1 +#define EXTRUDERS 2 // Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc. #define DEFAULT_NOMINAL_FILAMENT_DIA 1.75 @@ -318,8 +320,8 @@ * Enable and connect the power supply to the PS_ON_PIN. * Specify whether the power supply is active HIGH or active LOW. */ -//#define PSU_CONTROL -//#define PSU_NAME "Power Supply" +#define PSU_CONTROL +#define PSU_NAME "Power Supply" #if ENABLED(PSU_CONTROL) #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box @@ -417,14 +419,14 @@ * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. */ #define TEMP_SENSOR_0 1 -#define TEMP_SENSOR_1 0 +#define TEMP_SENSOR_1 1 #define TEMP_SENSOR_2 0 #define TEMP_SENSOR_3 0 #define TEMP_SENSOR_4 0 #define TEMP_SENSOR_5 0 #define TEMP_SENSOR_6 0 #define TEMP_SENSOR_7 0 -#define TEMP_SENSOR_BED 0 +#define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 #define TEMP_SENSOR_COOLER 0 @@ -683,11 +685,11 @@ // Specify here all the endstop connectors that are connected to any endstop or probe. // Almost all printers will be using one per axis. Probes will use one or more of the // extra connectors. Leave undefined any used for non-endstop and non-probe purposes. -#define USE_XMIN_PLUG -#define USE_YMIN_PLUG +//#define USE_XMIN_PLUG +//#define USE_YMIN_PLUG #define USE_ZMIN_PLUG -//#define USE_XMAX_PLUG -//#define USE_YMAX_PLUG +#define USE_XMAX_PLUG +#define USE_YMAX_PLUG //#define USE_ZMAX_PLUG // Enable pullup for all endstops to prevent a floating state @@ -717,13 +719,13 @@ #endif // Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define X_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_PROBE_ENDSTOP_INVERTING false // Set to true to invert the logic of the probe. +#define X_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Y_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Z_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define X_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Y_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Z_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Z_MIN_PROBE_ENDSTOP_INVERTING true // Set to true to invert the logic of the probe. /** * Stepper Drivers @@ -752,7 +754,7 @@ //#define Z3_DRIVER_TYPE A4988 //#define Z4_DRIVER_TYPE A4988 #define E0_DRIVER_TYPE A4988 -//#define E1_DRIVER_TYPE A4988 +#define E1_DRIVER_TYPE A4988 //#define E2_DRIVER_TYPE A4988 //#define E3_DRIVER_TYPE A4988 //#define E4_DRIVER_TYPE A4988 @@ -776,7 +778,7 @@ * * :[2,3,4,5,6,7] */ -//#define ENDSTOP_NOISE_THRESHOLD 2 +#define ENDSTOP_NOISE_THRESHOLD 2 // Check for stuck or disconnected endstops during homing moves. //#define DETECT_BROKEN_ENDSTOP @@ -799,14 +801,14 @@ * following movement settings. If fewer factors are given than the * total number of extruders, the last value applies to the rest. */ -//#define DISTINCT_E_FACTORS +#define DISTINCT_E_FACTORS /** * Default Axis Steps Per Unit (steps/mm) * Override with M92 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 500 } +#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 93 } /** * Default Max Feed Rate (mm/s) @@ -890,7 +892,7 @@ * * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained */ -//#define S_CURVE_ACCELERATION +#define S_CURVE_ACCELERATION //=========================================================================== //============================= Z Probe Options ============================= @@ -940,7 +942,7 @@ * Use G29 repeatedly, adjusting the Z height at each point with movement commands * or (with LCD_BED_LEVELING) the LCD controller. */ -//#define PROBE_MANUALLY +#define PROBE_MANUALLY /** * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. @@ -1055,14 +1057,14 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +#define NOZZLE_TO_PROBE_OFFSET { -25, -29, 0 } // Most probes should stay away from the edges of the bed, but // with NOZZLE_AS_PROBE this can be negative for a wider probing area. -#define PROBING_MARGIN 10 +#define PROBING_MARGIN 0 // X and Y axis travel speed (mm/min) between probes -#define XY_PROBE_FEEDRATE (133*60) +#define XY_PROBE_FEEDRATE (50*60) // Feedrate (mm/min) for the first approach when double-probing (MULTIPLE_PROBING == 2) #define Z_PROBE_FEEDRATE_FAST (4*60) @@ -1190,21 +1192,21 @@ // @section machine // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR false +#define INVERT_X_DIR true #define INVERT_Y_DIR true -#define INVERT_Z_DIR false +#define INVERT_Z_DIR true // @section extruder // For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR false -#define INVERT_E1_DIR false -#define INVERT_E2_DIR false -#define INVERT_E3_DIR false -#define INVERT_E4_DIR false -#define INVERT_E5_DIR false -#define INVERT_E6_DIR false -#define INVERT_E7_DIR false +#define INVERT_E0_DIR true +#define INVERT_E1_DIR true +#define INVERT_E2_DIR true +#define INVERT_E3_DIR true +#define INVERT_E4_DIR true +#define INVERT_E5_DIR true +#define INVERT_E6_DIR true +#define INVERT_E7_DIR true // @section homing @@ -1218,22 +1220,22 @@ */ //#define Z_IDLE_HEIGHT Z_HOME_POS -//#define Z_HOMING_HEIGHT 4 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ... +#define Z_HOMING_HEIGHT 4 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ... // Be sure to have this much clearance over your Z_MAX_POS to prevent grinding. //#define Z_AFTER_HOMING 10 // (mm) Height to move to after homing Z // Direction of endstops when homing; 1=MAX, -1=MIN // :[-1,1] -#define X_HOME_DIR -1 -#define Y_HOME_DIR -1 +#define X_HOME_DIR 1 +#define Y_HOME_DIR 1 #define Z_HOME_DIR -1 // @section machine // The size of the printable area -#define X_BED_SIZE 200 -#define Y_BED_SIZE 200 +#define X_BED_SIZE 265 +#define Y_BED_SIZE 138 // Travel limits (mm) after homing, corresponding to endstop positions. #define X_MIN_POS 0 @@ -1241,7 +1243,7 @@ #define Z_MIN_POS 0 #define X_MAX_POS X_BED_SIZE #define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 200 +#define Z_MAX_POS 151 /** * Software Endstops @@ -1387,7 +1389,7 @@ */ //#define AUTO_BED_LEVELING_3POINT //#define AUTO_BED_LEVELING_LINEAR -//#define AUTO_BED_LEVELING_BILINEAR +#define AUTO_BED_LEVELING_BILINEAR //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING @@ -1396,7 +1398,7 @@ * these options to restore the prior leveling state or to always enable * leveling immediately after G28. */ -//#define RESTORE_LEVELING_AFTER_G28 +#define RESTORE_LEVELING_AFTER_G28 //#define ENABLE_LEVELING_AFTER_G28 /** @@ -1518,22 +1520,22 @@ * Add a bed leveling sub-menu for ABL or MBL. * Include a guided procedure if manual probing is enabled. */ -//#define LCD_BED_LEVELING +#define LCD_BED_LEVELING #if ENABLED(LCD_BED_LEVELING) #define MESH_EDIT_Z_STEP 0.025 // (mm) Step size while manually probing Z axis. #define LCD_PROBE_Z_RANGE 4 // (mm) Z Range centered on Z_MIN_POS for LCD Z adjustment - //#define MESH_EDIT_MENU // Add a menu to edit mesh points + #define MESH_EDIT_MENU // Add a menu to edit mesh points #endif // Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS +#define LEVEL_BED_CORNERS #if ENABLED(LEVEL_BED_CORNERS) #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner + #define LEVEL_CENTER_TOO // Move to the center after the last corner //#define LEVEL_CORNERS_USE_PROBE #if ENABLED(LEVEL_CORNERS_USE_PROBE) #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 @@ -1587,7 +1589,7 @@ // - Move the Z probe (or nozzle) to a defined XY point before Z Homing. // - Prevent Z homing when the Z probe is outside bed area. // -//#define Z_SAFE_HOMING +#define Z_SAFE_HOMING #if ENABLED(Z_SAFE_HOMING) #define Z_SAFE_HOMING_X_POINT X_CENTER // X point for Z homing @@ -1672,12 +1674,12 @@ * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) */ -//#define EEPROM_SETTINGS // Persistent storage with M500 and M501 +#define EEPROM_SETTINGS // Persistent storage with M500 and M501 //#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. #define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load #if ENABLED(EEPROM_SETTINGS) - //#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. + #define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. #endif // @@ -1936,7 +1938,7 @@ * SD Card support is disabled by default. If your controller has an SD slot, * you must uncomment the following option or it won't work. */ -//#define SDSUPPORT +#define SDSUPPORT /** * SD CARD: ENABLE CRC @@ -2006,7 +2008,7 @@ // // Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. // -//#define INDIVIDUAL_AXIS_HOMING_MENU +#define INDIVIDUAL_AXIS_HOMING_MENU // // SPEAKER/BUZZER @@ -2014,7 +2016,7 @@ // If you have a speaker that can produce tones, enable it here. // By default Marlin assumes you have a buzzer with a fixed frequency. // -//#define SPEAKER +#define SPEAKER // // The duration and frequency for the UI feedback sound. @@ -2023,8 +2025,8 @@ // Note: Test audio output with the G-Code: // M300 S P // -//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 -//#define LCD_FEEDBACK_FREQUENCY_HZ 5000 +#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 +#define LCD_FEEDBACK_FREQUENCY_HZ 5000 //============================================================================= //======================== LCD / Controller Selection ========================= @@ -2061,7 +2063,7 @@ // // ULTIPANEL as seen on Thingiverse. // -//#define ULTIPANEL +#define ULTIPANEL // // PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3) @@ -2618,7 +2620,7 @@ // Use software PWM to drive the fan, as for the heaters. This uses a very low frequency // which is not as annoying as with the hardware PWM. On the other hand, if this frequency // is too low, you should also increment SOFT_PWM_SCALE. -//#define FAN_SOFT_PWM +#define FAN_SOFT_PWM // Incrementing this by 1 will double the software PWM frequency, // affecting heaters, and the fan if FAN_SOFT_PWM is enabled. diff --git a/config/examples/Geeetech/Duplicator5/Configuration_adv.h b/config/examples/Geeetech/Duplicator5/Configuration_adv.h index 5335fa012a..5c2f4c061f 100644 --- a/config/examples/Geeetech/Duplicator5/Configuration_adv.h +++ b/config/examples/Geeetech/Duplicator5/Configuration_adv.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Geeetech/Duplicator5" + /** * Configuration_adv.h * @@ -867,7 +869,7 @@ // On a 300mm bed a 5% grade would give a misalignment of ~1.5cm #define G34_MAX_GRADE 5 // (%) Maximum incline that G34 will handle - #define Z_STEPPER_ALIGN_ITERATIONS 5 // Number of iterations to apply during alignment + #define Z_STEPPER_ALIGN_ITERATIONS 3 // Number of iterations to apply during alignment #define Z_STEPPER_ALIGN_ACC 0.02 // Stop iterating early if the accuracy is better than this #define RESTORE_LEVELING_AFTER_G34 // Restore leveling after G34 is done? // After G34, re-home Z (G28 Z) or just calculate it from the last probe heights? diff --git a/config/examples/Geeetech/E180/Configuration.h b/config/examples/Geeetech/E180/Configuration.h index 78c2dc9160..0b88c9dc0c 100644 --- a/config/examples/Geeetech/E180/Configuration.h +++ b/config/examples/Geeetech/E180/Configuration.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Geeetech/E180" + /** * Configuration.h * @@ -102,7 +104,7 @@ * * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] */ -#define SERIAL_PORT 0 +#define SERIAL_PORT 1 /** * Select a secondary serial port on the board to use for communication with the host. @@ -134,7 +136,7 @@ // Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_RAMPS_14_EFB + #define MOTHERBOARD BOARD_GTM32_MINI #endif // Name displayed in the LCD "Ready" message and Info menu @@ -444,11 +446,11 @@ //#define TEMP_SENSOR_1_AS_REDUNDANT #define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10 -#define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 +#define TEMP_RESIDENCY_TIME 5 // (seconds) Time to wait for hotend to "settle" in M109 #define TEMP_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer #define TEMP_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target -#define TEMP_BED_RESIDENCY_TIME 10 // (seconds) Time to wait for bed to "settle" in M190 +#define TEMP_BED_RESIDENCY_TIME 5 // (seconds) Time to wait for bed to "settle" in M190 #define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer #define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target @@ -458,15 +460,15 @@ // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. -#define HEATER_0_MINTEMP 5 -#define HEATER_1_MINTEMP 5 -#define HEATER_2_MINTEMP 5 -#define HEATER_3_MINTEMP 5 -#define HEATER_4_MINTEMP 5 -#define HEATER_5_MINTEMP 5 -#define HEATER_6_MINTEMP 5 -#define HEATER_7_MINTEMP 5 -#define BED_MINTEMP 5 +#define HEATER_0_MINTEMP 0 +#define HEATER_1_MINTEMP 0 +#define HEATER_2_MINTEMP 0 +#define HEATER_3_MINTEMP 0 +#define HEATER_4_MINTEMP 0 +#define HEATER_5_MINTEMP 0 +#define HEATER_6_MINTEMP 0 +#define HEATER_7_MINTEMP 0 +#define BED_MINTEMP 0 #define CHAMBER_MINTEMP 5 // Above this temperature the heater will be switched off. @@ -513,13 +515,13 @@ #if ENABLED(PID_PARAMS_PER_HOTEND) // Specify between 1 and HOTENDS values per array. // If fewer than EXTRUDER values are provided, the last element will be repeated. - #define DEFAULT_Kp_LIST { 22.20, 22.20 } - #define DEFAULT_Ki_LIST { 1.08, 1.08 } - #define DEFAULT_Kd_LIST { 114.00, 114.00 } + #define DEFAULT_Kp_LIST { 45.80, 45.80 } + #define DEFAULT_Ki_LIST { 3.61, 3.61 } + #define DEFAULT_Kd_LIST { 145.39, 145.39 } #else - #define DEFAULT_Kp 22.20 - #define DEFAULT_Ki 1.08 - #define DEFAULT_Kd 114.00 + #define DEFAULT_Kp 45.80 + #define DEFAULT_Ki 3.61 + #define DEFAULT_Kd 145.39 #endif #endif // PIDTEMP @@ -561,8 +563,7 @@ #define DEFAULT_bedKp 10.00 #define DEFAULT_bedKi .023 #define DEFAULT_bedKd 305.4 - - // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. + // FIND YOUR OWN: "M303 E-1 C8 S60" #endif // PIDTEMPBED //=========================================================================== @@ -627,14 +628,14 @@ * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** */ #define PREVENT_COLD_EXTRUSION -#define EXTRUDE_MINTEMP 170 +#define EXTRUDE_MINTEMP 100 /** * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. * Note: For Bowden Extruders make this large enough to allow load/unload. */ #define PREVENT_LENGTHY_EXTRUDE -#define EXTRUDE_MAXLENGTH 200 +#define EXTRUDE_MAXLENGTH 1000 //=========================================================================== //======================== Thermal Runaway Protection ======================= @@ -683,9 +684,9 @@ // Specify here all the endstop connectors that are connected to any endstop or probe. // Almost all printers will be using one per axis. Probes will use one or more of the // extra connectors. Leave undefined any used for non-endstop and non-probe purposes. +#define USE_ZMAX_PLUG #define USE_XMIN_PLUG -#define USE_YMIN_PLUG -#define USE_ZMIN_PLUG +#define USE_YMAX_PLUG //#define USE_XMAX_PLUG //#define USE_YMAX_PLUG //#define USE_ZMAX_PLUG @@ -717,13 +718,13 @@ #endif // Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define X_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_PROBE_ENDSTOP_INVERTING false // Set to true to invert the logic of the probe. +#define X_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. +#define Y_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. +#define Z_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. +#define X_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. +#define Y_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. +#define Z_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. +#define Z_MIN_PROBE_ENDSTOP_INVERTING true // set to true to invert the logic of the probe. /** * Stepper Drivers @@ -806,7 +807,7 @@ * Override with M92 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 500 } +#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 98 } /** * Default Max Feed Rate (mm/s) @@ -841,9 +842,9 @@ * M204 R Retract Acceleration * M204 T Travel Acceleration */ -#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves +#define DEFAULT_ACCELERATION 500 // X, Y, Z and E acceleration for printing moves +#define DEFAULT_RETRACT_ACCELERATION 500 // E acceleration for retracts +#define DEFAULT_TRAVEL_ACCELERATION 500 // X, Y, Z acceleration for travel (non printing) moves /** * Default Jerk limits (mm/s) @@ -890,7 +891,7 @@ * * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained */ -//#define S_CURVE_ACCELERATION +#define S_CURVE_ACCELERATION //=========================================================================== //============================= Z Probe Options ============================= @@ -940,7 +941,7 @@ * Use G29 repeatedly, adjusting the Z height at each point with movement commands * or (with LCD_BED_LEVELING) the LCD controller. */ -//#define PROBE_MANUALLY +#define PROBE_MANUALLY /** * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. @@ -1059,10 +1060,10 @@ // Most probes should stay away from the edges of the bed, but // with NOZZLE_AS_PROBE this can be negative for a wider probing area. -#define PROBING_MARGIN 10 +#define PROBING_MARGIN 0 // X and Y axis travel speed (mm/min) between probes -#define XY_PROBE_FEEDRATE (133*60) +#define XY_PROBE_FEEDRATE (50*60) // Feedrate (mm/min) for the first approach when double-probing (MULTIPLE_PROBING == 2) #define Z_PROBE_FEEDRATE_FAST (4*60) @@ -1197,14 +1198,14 @@ // @section extruder // For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR false -#define INVERT_E1_DIR false -#define INVERT_E2_DIR false -#define INVERT_E3_DIR false -#define INVERT_E4_DIR false -#define INVERT_E5_DIR false -#define INVERT_E6_DIR false -#define INVERT_E7_DIR false +#define INVERT_E0_DIR true +#define INVERT_E1_DIR true +#define INVERT_E2_DIR true +#define INVERT_E3_DIR true +#define INVERT_E4_DIR true +#define INVERT_E5_DIR true +#define INVERT_E6_DIR true +#define INVERT_E7_DIR true // @section homing @@ -1218,7 +1219,7 @@ */ //#define Z_IDLE_HEIGHT Z_HOME_POS -//#define Z_HOMING_HEIGHT 4 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ... +#define Z_HOMING_HEIGHT 5 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ... // Be sure to have this much clearance over your Z_MAX_POS to prevent grinding. //#define Z_AFTER_HOMING 10 // (mm) Height to move to after homing Z @@ -1226,14 +1227,14 @@ // Direction of endstops when homing; 1=MAX, -1=MIN // :[-1,1] #define X_HOME_DIR -1 -#define Y_HOME_DIR -1 -#define Z_HOME_DIR -1 +#define Y_HOME_DIR 1 +#define Z_HOME_DIR 1 // @section machine // The size of the printable area -#define X_BED_SIZE 200 -#define Y_BED_SIZE 200 +#define X_BED_SIZE 130 +#define Y_BED_SIZE 130 // Travel limits (mm) after homing, corresponding to endstop positions. #define X_MIN_POS 0 @@ -1241,7 +1242,7 @@ #define Z_MIN_POS 0 #define X_MAX_POS X_BED_SIZE #define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 200 +#define Z_MAX_POS 130 /** * Software Endstops @@ -1269,7 +1270,7 @@ #endif #if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS) - //#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD + #define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD #endif /** @@ -1289,8 +1290,9 @@ #if ENABLED(FILAMENT_RUNOUT_SENSOR) #define FIL_RUNOUT_ENABLED_DEFAULT true // Enable the sensor on startup. Override with M412 followed by M500. #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. + #define FIL_RUNOUT_PIN 66 - #define FIL_RUNOUT_STATE LOW // Pin state indicating that filament is NOT present. + #define FIL_RUNOUT_STATE HIGH // Pin state indicating that filament is NOT present. #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. //#define WATCH_ALL_RUNOUT_SENSORS // Execute runout script on any triggering sensor, not only for the active extruder. @@ -1388,7 +1390,7 @@ //#define AUTO_BED_LEVELING_3POINT //#define AUTO_BED_LEVELING_LINEAR //#define AUTO_BED_LEVELING_BILINEAR -//#define AUTO_BED_LEVELING_UBL +#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING /** @@ -1396,7 +1398,7 @@ * these options to restore the prior leveling state or to always enable * leveling immediately after G28. */ -//#define RESTORE_LEVELING_AFTER_G28 +#define RESTORE_LEVELING_AFTER_G28 //#define ENABLE_LEVELING_AFTER_G28 /** @@ -1454,17 +1456,17 @@ #if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR) // Set the number of grid points per dimension. - #define GRID_MAX_POINTS_X 3 + #define GRID_MAX_POINTS_X 5 #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X // Probe along the Y axis, advancing X after each column - //#define PROBE_Y_FIRST + #define PROBE_Y_FIRST #if ENABLED(AUTO_BED_LEVELING_BILINEAR) // Beyond the probed grid, continue the implied tilt? // Default is to maintain the height of the nearest edge. - //#define EXTRAPOLATE_BEYOND_GRID + #define EXTRAPOLATE_BEYOND_GRID // // Experimental Subdivision of the grid by Catmull-Rom method. @@ -1486,8 +1488,8 @@ //#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh - #define MESH_INSET 1 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. + #define MESH_INSET 0 // Set Mesh bounds as an inset region of the bed + #define GRID_MAX_POINTS_X 5 // Don't use more than 15 points per axis, implementation limited. #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X //#define UBL_HILBERT_CURVE // Use Hilbert distribution for less travel when probing multiple points @@ -1495,7 +1497,7 @@ #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 - //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used + #define UBL_Z_RAISE_WHEN_OFF_MESH 0 // When the nozzle is off the mesh, this value is used // as the Z-Height correction value. //#define UBL_MESH_WIZARD // Run several commands in a row to get a complete mesh @@ -1506,7 +1508,7 @@ //=================================== Mesh ================================== //=========================================================================== - #define MESH_INSET 10 // Set Mesh bounds as an inset region of the bed + #define MESH_INSET 0 // Set Mesh bounds as an inset region of the bed #define GRID_MAX_POINTS_X 3 // Don't use more than 7 points per axis, implementation limited. #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X @@ -1672,12 +1674,12 @@ * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) */ -//#define EEPROM_SETTINGS // Persistent storage with M500 and M501 +#define EEPROM_SETTINGS // Persistent storage with M500 and M501 //#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. #define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load #if ENABLED(EEPROM_SETTINGS) - //#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. + #define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. #endif // @@ -1706,14 +1708,14 @@ // Preheat Constants - Up to 5 are supported without changes // #define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 180 -#define PREHEAT_1_TEMP_BED 70 +#define PREHEAT_1_TEMP_HOTEND 200 +#define PREHEAT_1_TEMP_BED 60 #define PREHEAT_1_TEMP_CHAMBER 35 #define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 #define PREHEAT_2_LABEL "ABS" -#define PREHEAT_2_TEMP_HOTEND 240 -#define PREHEAT_2_TEMP_BED 110 +#define PREHEAT_2_TEMP_HOTEND 250 +#define PREHEAT_2_TEMP_BED 100 #define PREHEAT_2_TEMP_CHAMBER 35 #define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 @@ -1728,11 +1730,11 @@ * P1 Raise the nozzle always to Z-park height. * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. */ -//#define NOZZLE_PARK_FEATURE +#define NOZZLE_PARK_FEATURE #if ENABLED(NOZZLE_PARK_FEATURE) // Specify a park position as { X, Y, Z_raise } - #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 } + #define NOZZLE_PARK_POINT { (X_MIN_POS + 20), (Y_MIN_POS + 20),Z_MIN_POS + 20 } //#define NOZZLE_PARK_X_ONLY // X move only is required to park //#define NOZZLE_PARK_Y_ONLY // Y move only is required to park #define NOZZLE_PARK_Z_RAISE_MIN 2 // (mm) Always raise Z by at least this distance @@ -1936,7 +1938,8 @@ * SD Card support is disabled by default. If your controller has an SD slot, * you must uncomment the following option or it won't work. */ -//#define SDSUPPORT +#define SDSUPPORT +#define SDIO_SUPPORT /** * SD CARD: ENABLE CRC @@ -2006,7 +2009,7 @@ // // Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. // -//#define INDIVIDUAL_AXIS_HOMING_MENU +#define INDIVIDUAL_AXIS_HOMING_MENU // // SPEAKER/BUZZER @@ -2014,7 +2017,7 @@ // If you have a speaker that can produce tones, enable it here. // By default Marlin assumes you have a buzzer with a fixed frequency. // -//#define SPEAKER +#define SPEAKER // // The duration and frequency for the UI feedback sound. @@ -2023,8 +2026,8 @@ // Note: Test audio output with the G-Code: // M300 S P // -//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 -//#define LCD_FEEDBACK_FREQUENCY_HZ 5000 +#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 50 +#define LCD_FEEDBACK_FREQUENCY_HZ 10 //============================================================================= //======================== LCD / Controller Selection ========================= @@ -2037,7 +2040,7 @@ // // Note: Usually sold with a white PCB. // -//#define REPRAP_DISCOUNT_SMART_CONTROLLER +#define REPRAP_DISCOUNT_SMART_CONTROLLER // // GT2560 (YHCB2004) LCD Display @@ -2196,6 +2199,9 @@ // https://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller // //#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER +//#define ST7920_DELAY_1 DELAY_NS(125) +//#define ST7920_DELAY_2 DELAY_NS(125) +//#define ST7920_DELAY_3 DELAY_NS(125) // // K.3D Full Graphic Smart Controller @@ -2618,7 +2624,7 @@ // Use software PWM to drive the fan, as for the heaters. This uses a very low frequency // which is not as annoying as with the hardware PWM. On the other hand, if this frequency // is too low, you should also increment SOFT_PWM_SCALE. -//#define FAN_SOFT_PWM +#define FAN_SOFT_PWM // Incrementing this by 1 will double the software PWM frequency, // affecting heaters, and the fan if FAN_SOFT_PWM is enabled. diff --git a/config/examples/Geeetech/E180/Configuration_adv.h b/config/examples/Geeetech/E180/Configuration_adv.h index 5335fa012a..160acc2271 100644 --- a/config/examples/Geeetech/E180/Configuration_adv.h +++ b/config/examples/Geeetech/E180/Configuration_adv.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Geeetech/E180" + /** * Configuration_adv.h * @@ -307,7 +309,7 @@ #if ENABLED(PIDTEMP) // Add an experimental additional term to the heater power, proportional to the extrusion speed. // A well-chosen Kc value should add just enough power to melt the increased material volume. - //#define PID_EXTRUSION_SCALING + #define PID_EXTRUSION_SCALING #if ENABLED(PID_EXTRUSION_SCALING) #define DEFAULT_Kc (100) // heating power = Kc * e_speed #define LPQ_MAX_LEN 50 @@ -341,7 +343,7 @@ * 5. Enable PID_FAN_SCALING_ALTERNATIVE_DEFINITION and enter the two identified Kf-values in * PID_FAN_SCALING_AT_FULL_SPEED and PID_FAN_SCALING_AT_MIN_SPEED. Enter the minimum speed in PID_FAN_SCALING_MIN_SPEED */ - //#define PID_FAN_SCALING + #define PID_FAN_SCALING #if ENABLED(PID_FAN_SCALING) //#define PID_FAN_SCALING_ALTERNATIVE_DEFINITION #if ENABLED(PID_FAN_SCALING_ALTERNATIVE_DEFINITION) @@ -411,14 +413,14 @@ // The number of consecutive low temperature errors that can occur // before a min_temp_error is triggered. (Shouldn't be more than 10.) -//#define MAX_CONSECUTIVE_LOW_TEMPERATURE_ERROR_ALLOWED 0 +//#define MAX_CONSECUTIVE_LOW_TEMPERATURE_ERROR_ALLOWED 10 // The number of milliseconds a hotend will preheat before starting to check // the temperature. This value should NOT be set to the time it takes the // hot end to reach the target temperature, but the time it takes to reach // the minimum temperature your thermistor can read. The lower the better/safer. // This shouldn't need to be more than 30 seconds (30000) -//#define MILLISECONDS_PREHEAT_TIME 0 +//#define MILLISECONDS_PREHEAT_TIME 30000 // @section extruder @@ -736,13 +738,13 @@ //#define SENSORLESS_BACKOFF_MM { 2, 2 } // (mm) Backoff from endstops before sensorless homing -#define HOMING_BUMP_MM { 5, 5, 2 } // (mm) Backoff from endstops after first bump -#define HOMING_BUMP_DIVISOR { 2, 2, 4 } // Re-Bump Speed Divisor (Divides the Homing Feedrate) +#define HOMING_BUMP_MM { 5, 5, 5 } // (mm) Backoff from endstops after first bump +#define HOMING_BUMP_DIVISOR { 4, 4, 4 } // Re-Bump Speed Divisor (Divides the Homing Feedrate) //#define HOMING_BACKOFF_POST_MM { 2, 2, 2 } // (mm) Backoff from endstops after homing //#define QUICK_HOME // If G28 contains XY do a diagonal move first -//#define HOME_Y_BEFORE_X // If G28 contains XY home Y before X +#define HOME_Y_BEFORE_X // If G28 contains XY home Y before X //#define HOME_Z_FIRST // Home Z first. Requires a Z-MIN endstop (not a probe). //#define CODEPENDENT_XY_HOMING // If X/Y can't home without homing Y/X first @@ -867,7 +869,7 @@ // On a 300mm bed a 5% grade would give a misalignment of ~1.5cm #define G34_MAX_GRADE 5 // (%) Maximum incline that G34 will handle - #define Z_STEPPER_ALIGN_ITERATIONS 5 // Number of iterations to apply during alignment + #define Z_STEPPER_ALIGN_ITERATIONS 3 // Number of iterations to apply during alignment #define Z_STEPPER_ALIGN_ACC 0.02 // Stop iterating early if the accuracy is better than this #define RESTORE_LEVELING_AFTER_G34 // Restore leveling after G34 is done? // After G34, re-home Z (G28 Z) or just calculate it from the last probe heights? @@ -1790,20 +1792,20 @@ * * Warning: Does not respect endstops! */ -//#define BABYSTEPPING +#define BABYSTEPPING #if ENABLED(BABYSTEPPING) //#define INTEGRATED_BABYSTEPPING // EXPERIMENTAL integration of babystepping into the Stepper ISR //#define BABYSTEP_WITHOUT_HOMING - //#define BABYSTEP_ALWAYS_AVAILABLE // Allow babystepping at all times (not just during movement). + #define BABYSTEP_ALWAYS_AVAILABLE // Allow babystepping at all times (not just during movement). //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way //#define BABYSTEP_MILLIMETER_UNITS // Specify BABYSTEP_MULTIPLICATOR_(XY|Z) in mm instead of micro-steps #define BABYSTEP_MULTIPLICATOR_Z 1 // (steps or mm) Steps or millimeter distance for each Z babystep #define BABYSTEP_MULTIPLICATOR_XY 1 // (steps or mm) Steps or millimeter distance for each XY babystep - //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. + #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 2000 // Maximum interval between clicks, in milliseconds. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on doubleclick when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) @@ -1837,12 +1839,12 @@ * * See https://marlinfw.org/docs/features/lin_advance.html for full instructions. */ -//#define LIN_ADVANCE +#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants - #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed + #define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants + #define LIN_ADVANCE_K 0 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // If enabled, this will generate debug information output over USB. - //#define EXPERIMENTAL_SCURVE // Enable this option to permit S-Curve Acceleration + #define EXPERIMENTAL_SCURVE // Enable this option to permit S-Curve Acceleration #endif // @section leveling @@ -1989,13 +1991,13 @@ #define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle //#define ARC_SEGMENTS_PER_SEC 50 // Use feedrate to choose segment length (with MM_PER_ARC_SEGMENT as the minimum) #define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections - //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles - //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes + #define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles + #define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes //#define SF_ARC_FIX // Enable only if using SkeinForge with "Arc Point" fillet procedure #endif -// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes. -//#define BEZIER_CURVE_SUPPORT +// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes. - unused by most slicers +#define BEZIER_CURVE_SUPPORT /** * Direct Stepping @@ -2170,7 +2172,7 @@ //#define NO_TIMEOUTS 1000 // Milliseconds // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. -//#define ADVANCED_OK +#define ADVANCED_OK // Printrun may have trouble receiving long strings all at once. // This option inserts short delays between lines of serial output. @@ -2313,47 +2315,46 @@ */ //#define ADVANCED_PAUSE_FEATURE #if ENABLED(ADVANCED_PAUSE_FEATURE) - #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. + #define PAUSE_PARK_RETRACT_FEEDRATE 10 // (mm/s) Initial retract feedrate. #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. // This short retract is done immediately, before parking the nozzle. #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast. #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload. + #define FILAMENT_CHANGE_UNLOAD_LENGTH 450 // (mm) The length of filament for a complete unload. // For Bowden, the full length of the tube and nozzle. // For direct drive, the full length of the nozzle. // Set to 0 for manual unloading. - #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE 6 // (mm/s) Slow move when starting load. - #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 0 // (mm) Slow length, to allow time to insert material. + #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE 5 // (mm/s) Slow move when starting load. + #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 300 // (mm) Slow length, to allow time to insert material. // 0 to disable start loading and skip to fast load only - #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast. + #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 10 // (mm/s) Load filament feedrate. This can be pretty fast. #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle. + #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 300 // (mm) Load length of filament, from extruder gear to nozzle. // For Bowden, the full length of the tube and nozzle. // For direct drive, the full length of the nozzle. //#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted. - #define ADVANCED_PAUSE_PURGE_FEEDRATE 3 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate. - #define ADVANCED_PAUSE_PURGE_LENGTH 50 // (mm) Length to extrude after loading. + #define ADVANCED_PAUSE_PURGE_FEEDRATE 5 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate. + #define ADVANCED_PAUSE_PURGE_LENGTH 25 // (mm) Length to extrude after loading. // Set to 0 for manual extrusion. // Filament can be extruded repeatedly from the Filament Change menu // until extrusion is consistent, and to purge old filament. - #define ADVANCED_PAUSE_RESUME_PRIME 0 // (mm) Extra distance to prime nozzle after returning from park. - //#define ADVANCED_PAUSE_FANS_PAUSE // Turn off print-cooling fans while the machine is paused. + #define ADVANCED_PAUSE_RESUME_PRIME 1 // (mm) Extra distance to prime nozzle after returning from park. // Filament Unload does a Retract, Delay, and Purge first: - #define FILAMENT_UNLOAD_PURGE_RETRACT 13 // (mm) Unload initial retract length. + #define FILAMENT_UNLOAD_PURGE_RETRACT 20 // (mm) Unload initial retract length. #define FILAMENT_UNLOAD_PURGE_DELAY 5000 // (ms) Delay for the filament to cool after retract. - #define FILAMENT_UNLOAD_PURGE_LENGTH 8 // (mm) An unretract is done, then this length is purged. + #define FILAMENT_UNLOAD_PURGE_LENGTH 10 // (mm) An unretract is done, then this length is purged. #define FILAMENT_UNLOAD_PURGE_FEEDRATE 25 // (mm/s) feedrate to purge before unload - #define PAUSE_PARK_NOZZLE_TIMEOUT 45 // (seconds) Time limit before the nozzle is turned off for safety. + #define PAUSE_PARK_NOZZLE_TIMEOUT 60 // (seconds) Time limit before the nozzle is turned off for safety. #define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed. #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change. - //#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. - //#define HOME_BEFORE_FILAMENT_CHANGE // If needed, home before parking for filament change + #define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. + #define HOME_BEFORE_FILAMENT_CHANGE // If needed, home before parking for filament change - //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. - //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) + #define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. + #define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) #endif // @section tmc @@ -3650,9 +3651,9 @@ * Host Prompt Support enables Marlin to use the host for user prompts so * filament runout and other processes can be managed from the host side. */ -//#define HOST_ACTION_COMMANDS +#define HOST_ACTION_COMMANDS #if ENABLED(HOST_ACTION_COMMANDS) - //#define HOST_PROMPT_SUPPORT + #define HOST_PROMPT_SUPPORT //#define HOST_START_MENU_ITEM // Add a menu item that tells the host to start #endif diff --git a/config/examples/Geeetech/GT2560/Configuration.h b/config/examples/Geeetech/GT2560/Configuration.h index 78c2dc9160..d5463f02bc 100644 --- a/config/examples/Geeetech/GT2560/Configuration.h +++ b/config/examples/Geeetech/GT2560/Configuration.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Geeetech/GT2560" + /** * Configuration.h * @@ -134,7 +136,7 @@ // Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_RAMPS_14_EFB + #define MOTHERBOARD BOARD_GT2560_REV_A #endif // Name displayed in the LCD "Ready" message and Info menu @@ -424,7 +426,7 @@ #define TEMP_SENSOR_5 0 #define TEMP_SENSOR_6 0 #define TEMP_SENSOR_7 0 -#define TEMP_SENSOR_BED 0 +#define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 #define TEMP_SENSOR_COOLER 0 @@ -513,13 +515,19 @@ #if ENABLED(PID_PARAMS_PER_HOTEND) // Specify between 1 and HOTENDS values per array. // If fewer than EXTRUDER values are provided, the last element will be repeated. - #define DEFAULT_Kp_LIST { 22.20, 22.20 } - #define DEFAULT_Ki_LIST { 1.08, 1.08 } - #define DEFAULT_Kd_LIST { 114.00, 114.00 } + #define DEFAULT_Kp_LIST { 12.33, 12.33 } + #define DEFAULT_Ki_LIST { 0.51, 0.51 } + #define DEFAULT_Kd_LIST { 74.50, 74.50 } #else - #define DEFAULT_Kp 22.20 - #define DEFAULT_Ki 1.08 - #define DEFAULT_Kd 114.00 + // Geeetech MK8 Extruder + #define DEFAULT_Kp 12.33 + #define DEFAULT_Ki 0.51 + #define DEFAULT_Kd 74.50 + + // CTC MK8 Extruder + //#define DEFAULT_Kp 19.86 + //#define DEFAULT_Ki 1.00 + //#define DEFAULT_Kd 98.83 #endif #endif // PIDTEMP @@ -556,11 +564,10 @@ //#define MIN_BED_POWER 0 //#define PID_BED_DEBUG // Sends debug data to the serial port. - // 120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - // from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) - #define DEFAULT_bedKp 10.00 - #define DEFAULT_bedKi .023 - #define DEFAULT_bedKd 305.4 + // 12v (120 watt?) MK2a PCB Heatbed into 4mm borosilicate (Geeetech Průša i3 Pro, Pro/B/C/X) + #define DEFAULT_bedKp 234.88 + #define DEFAULT_bedKi 42.79 + #define DEFAULT_bedKd 322.28 // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. #endif // PIDTEMPBED @@ -806,14 +813,14 @@ * Override with M92 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 500 } +#define DEFAULT_AXIS_STEPS_PER_UNIT { 78.74, 78.74, 2560, 105 } /** * Default Max Feed Rate (mm/s) * Override with M203 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 } +#define DEFAULT_MAX_FEEDRATE { 400, 400, 2, 45 } //#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 #if ENABLED(LIMITED_MAX_FR_EDITING) @@ -826,7 +833,7 @@ * Override with M201 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 } +#define DEFAULT_MAX_ACCELERATION { 5000, 5000, 50, 5000 } //#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 #if ENABLED(LIMITED_MAX_ACCEL_EDITING) @@ -841,8 +848,8 @@ * M204 R Retract Acceleration * M204 T Travel Acceleration */ -#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts +#define DEFAULT_ACCELERATION 1000 // X, Y, Z and E acceleration for printing moves +#define DEFAULT_RETRACT_ACCELERATION 2000 // E acceleration for retracts #define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves /** @@ -867,7 +874,7 @@ #endif #endif -#define DEFAULT_EJERK 5.0 // May be used by Linear Advance +#define DEFAULT_EJERK 4.0 // May be used by Linear Advance /** * Junction Deviation Factor @@ -877,7 +884,7 @@ * https://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html */ #if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.013 // (mm) Distance from real junction edge + #define JUNCTION_DEVIATION_MM 0.04 // (mm) Distance from real junction edge #define JD_HANDLE_SMALL_SEGMENTS // Use curvature estimation instead of just the junction angle // for small segments (< 1mm) with large junction angles (> 135°). #endif @@ -906,7 +913,7 @@ * The probe replaces the Z-MIN endstop and is used for Z homing. * (Automatically enables USE_PROBE_FOR_Z_HOMING.) */ -#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN +//#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN // Force the use of the probe for Z-axis homing //#define USE_PROBE_FOR_Z_HOMING @@ -1190,21 +1197,21 @@ // @section machine // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR false +#define INVERT_X_DIR true #define INVERT_Y_DIR true #define INVERT_Z_DIR false // @section extruder // For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR false -#define INVERT_E1_DIR false -#define INVERT_E2_DIR false -#define INVERT_E3_DIR false -#define INVERT_E4_DIR false -#define INVERT_E5_DIR false -#define INVERT_E6_DIR false -#define INVERT_E7_DIR false +#define INVERT_E0_DIR true +#define INVERT_E1_DIR true +#define INVERT_E2_DIR true +#define INVERT_E3_DIR true +#define INVERT_E4_DIR true +#define INVERT_E5_DIR true +#define INVERT_E6_DIR true +#define INVERT_E7_DIR true // @section homing @@ -1672,7 +1679,7 @@ * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) */ -//#define EEPROM_SETTINGS // Persistent storage with M500 and M501 +#define EEPROM_SETTINGS // Persistent storage with M500 and M501 //#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. #define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load @@ -2037,7 +2044,7 @@ // // Note: Usually sold with a white PCB. // -//#define REPRAP_DISCOUNT_SMART_CONTROLLER +#define REPRAP_DISCOUNT_SMART_CONTROLLER // // GT2560 (YHCB2004) LCD Display @@ -2741,5 +2748,14 @@ // Only power servos during movement, otherwise leave off to prevent jitter //#define DEACTIVATE_SERVOS_AFTER_MOVE +/** + * Customize common displays for GT2560 + */ +#if ANY(ULTIMAKERCONTROLLER, REPRAP_DISCOUNT_SMART_CONTROLLER, G3D_PANEL, MKS_MINI_12864) + #define SDSUPPORT // Force SD Card support on for these displays +#elif DISABLED(LIGHTWEIGHT_UI) + #define LCD_WIDTH 20 // Default is 22. For this Geeetech use 20. +#endif + // Edit servo angles with M281 and save to EEPROM with M500 //#define EDITABLE_SERVO_ANGLES diff --git a/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h b/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h index 78c2dc9160..f39f50ee4f 100644 --- a/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h +++ b/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Geeetech/I3_Pro_X-GT2560" + /** * Configuration.h * @@ -69,7 +71,7 @@ // @section info // Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes. +#define STRING_CONFIG_H_AUTHOR "(R. de Weerd, I3 Pro X)" // Who made the changes. //#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) /** @@ -134,11 +136,11 @@ // Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_RAMPS_14_EFB + #define MOTHERBOARD BOARD_GT2560_REV_A_PLUS #endif // Name displayed in the LCD "Ready" message and Info menu -//#define CUSTOM_MACHINE_NAME "3D Printer" +#define CUSTOM_MACHINE_NAME "RdW i3 Pro X" // Printer's unique ID, used by some programs to differentiate between machines. // Choose your own or use a service like https://www.uuidgenerator.net/version4 @@ -424,7 +426,7 @@ #define TEMP_SENSOR_5 0 #define TEMP_SENSOR_6 0 #define TEMP_SENSOR_7 0 -#define TEMP_SENSOR_BED 0 +#define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 #define TEMP_SENSOR_COOLER 0 @@ -634,7 +636,7 @@ * Note: For Bowden Extruders make this large enough to allow load/unload. */ #define PREVENT_LENGTHY_EXTRUDE -#define EXTRUDE_MAXLENGTH 200 +#define EXTRUDE_MAXLENGTH 300 //=========================================================================== //======================== Thermal Runaway Protection ======================= @@ -806,14 +808,14 @@ * Override with M92 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 500 } +#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 2560, 93 } // MXL, Z M8=1.25, MK8 /** * Default Max Feed Rate (mm/s) * Override with M203 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 } +#define DEFAULT_MAX_FEEDRATE { 400, 400, 2, 45 } //#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 #if ENABLED(LIMITED_MAX_FR_EDITING) @@ -826,7 +828,7 @@ * Override with M201 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 } +#define DEFAULT_MAX_ACCELERATION { 4000, 4000, 40, 4000 } //#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 #if ENABLED(LIMITED_MAX_ACCEL_EDITING) @@ -841,8 +843,8 @@ * M204 R Retract Acceleration * M204 T Travel Acceleration */ -#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts +#define DEFAULT_ACCELERATION 1000 // X, Y, Z and E acceleration for printing moves +#define DEFAULT_RETRACT_ACCELERATION 2000 // E acceleration for retracts #define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves /** @@ -855,8 +857,8 @@ */ //#define CLASSIC_JERK #if ENABLED(CLASSIC_JERK) - #define DEFAULT_XJERK 10.0 - #define DEFAULT_YJERK 10.0 + #define DEFAULT_XJERK 5.0 + #define DEFAULT_YJERK 5.0 #define DEFAULT_ZJERK 0.3 //#define TRAVEL_EXTRA_XYJERK 0.0 // Additional jerk allowance for all travel moves @@ -867,7 +869,7 @@ #endif #endif -#define DEFAULT_EJERK 5.0 // May be used by Linear Advance +#define DEFAULT_EJERK 4.0 // May be used by Linear Advance /** * Junction Deviation Factor @@ -877,7 +879,7 @@ * https://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html */ #if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.013 // (mm) Distance from real junction edge + #define JUNCTION_DEVIATION_MM 0.01 // (mm) Distance from real junction edge #define JD_HANDLE_SMALL_SEGMENTS // Use curvature estimation instead of just the junction angle // for small segments (< 1mm) with large junction angles (> 135°). #endif @@ -957,8 +959,8 @@ /** * Z Servo Probe, such as an endstop switch on a rotating arm. */ -//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector. -//#define Z_SERVO_ANGLES { 70, 0 } // Z Servo Deploy and Stow angles +//#define Z_PROBE_SERVO_NR 1 // Defaults to SERVO 0 connector. +//#define Z_SERVO_ANGLES { 10, 90 } // Z Servo Deploy and Stow angles /** * The BLTouch probe uses a Hall effect sensor and emulates a servo. @@ -1059,7 +1061,7 @@ // Most probes should stay away from the edges of the bed, but // with NOZZLE_AS_PROBE this can be negative for a wider probing area. -#define PROBING_MARGIN 10 +#define PROBING_MARGIN 8 // X and Y axis travel speed (mm/min) between probes #define XY_PROBE_FEEDRATE (133*60) @@ -1124,9 +1126,9 @@ * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. */ #define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow -#define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points +#define Z_CLEARANCE_BETWEEN_PROBES 6 // Z Clearance between probe points #define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes -//#define Z_AFTER_PROBING 5 // Z position after probing is done +//#define Z_AFTER_PROBING 6 // Z position after probing is done #define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping @@ -1190,14 +1192,14 @@ // @section machine // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR false +#define INVERT_X_DIR true #define INVERT_Y_DIR true #define INVERT_Z_DIR false // @section extruder // For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR false +#define INVERT_E0_DIR true #define INVERT_E1_DIR false #define INVERT_E2_DIR false #define INVERT_E3_DIR false @@ -1218,7 +1220,7 @@ */ //#define Z_IDLE_HEIGHT Z_HOME_POS -//#define Z_HOMING_HEIGHT 4 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ... +#define Z_HOMING_HEIGHT 8 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ... // Be sure to have this much clearance over your Z_MAX_POS to prevent grinding. //#define Z_AFTER_HOMING 10 // (mm) Height to move to after homing Z @@ -1232,8 +1234,8 @@ // @section machine // The size of the printable area -#define X_BED_SIZE 200 -#define Y_BED_SIZE 200 +#define X_BED_SIZE 205 +#define Y_BED_SIZE 230 // Travel limits (mm) after homing, corresponding to endstop positions. #define X_MIN_POS 0 @@ -1241,7 +1243,7 @@ #define Z_MIN_POS 0 #define X_MAX_POS X_BED_SIZE #define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 200 +#define Z_MAX_POS 170 /** * Software Endstops @@ -1672,7 +1674,7 @@ * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) */ -//#define EEPROM_SETTINGS // Persistent storage with M500 and M501 +#define EEPROM_SETTINGS // Persistent storage with M500 and M501 //#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. #define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load @@ -1687,7 +1689,7 @@ // every couple of seconds when it can't accept commands. // #define HOST_KEEPALIVE_FEATURE // Disable this if your host doesn't like keepalive messages -#define DEFAULT_KEEPALIVE_INTERVAL 2 // Number of seconds between "busy" messages. Set with M113. +#define DEFAULT_KEEPALIVE_INTERVAL 4 // Number of seconds between "busy" messages. Set with M113. #define BUSY_WHILE_HEATING // Some hosts require "busy" messages even during heating // @@ -1712,8 +1714,8 @@ #define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 #define PREHEAT_2_LABEL "ABS" -#define PREHEAT_2_TEMP_HOTEND 240 -#define PREHEAT_2_TEMP_BED 110 +#define PREHEAT_2_TEMP_HOTEND 215 +#define PREHEAT_2_TEMP_BED 105 #define PREHEAT_2_TEMP_CHAMBER 35 #define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 @@ -1936,7 +1938,7 @@ * SD Card support is disabled by default. If your controller has an SD slot, * you must uncomment the following option or it won't work. */ -//#define SDSUPPORT +#define SDSUPPORT /** * SD CARD: ENABLE CRC @@ -2023,8 +2025,8 @@ // Note: Test audio output with the G-Code: // M300 S P // -//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 -//#define LCD_FEEDBACK_FREQUENCY_HZ 5000 +#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 100 +#define LCD_FEEDBACK_FREQUENCY_HZ 1000 //============================================================================= //======================== LCD / Controller Selection ========================= @@ -2037,7 +2039,7 @@ // // Note: Usually sold with a white PCB. // -//#define REPRAP_DISCOUNT_SMART_CONTROLLER +#define REPRAP_DISCOUNT_SMART_CONTROLLER // // GT2560 (YHCB2004) LCD Display @@ -2731,7 +2733,7 @@ * Set this manually if there are extra servos needing manual control. * Set to 0 to turn off servo support. */ -//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command +#define NUM_SERVOS 1 // Servo index starts with 0 for M280 command // (ms) Delay before the next move will start, to give the servo time to reach its target angle. // 300ms is a good value but you can try less delay. diff --git a/config/examples/Geeetech/M201/Configuration.h b/config/examples/Geeetech/M201/Configuration.h index 78c2dc9160..1dc776e799 100644 --- a/config/examples/Geeetech/M201/Configuration.h +++ b/config/examples/Geeetech/M201/Configuration.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Geeetech/M201" + /** * Configuration.h * @@ -102,7 +104,7 @@ * * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] */ -#define SERIAL_PORT 0 +#define SERIAL_PORT 1 /** * Select a secondary serial port on the board to use for communication with the host. @@ -134,7 +136,7 @@ // Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_RAMPS_14_EFB + #define MOTHERBOARD BOARD_GTM32_REV_B #endif // Name displayed in the LCD "Ready" message and Info menu @@ -424,7 +426,7 @@ #define TEMP_SENSOR_5 0 #define TEMP_SENSOR_6 0 #define TEMP_SENSOR_7 0 -#define TEMP_SENSOR_BED 0 +#define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 #define TEMP_SENSOR_COOLER 0 @@ -444,11 +446,11 @@ //#define TEMP_SENSOR_1_AS_REDUNDANT #define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10 -#define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 +#define TEMP_RESIDENCY_TIME 5 // (seconds) Time to wait for hotend to "settle" in M109 #define TEMP_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer #define TEMP_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target -#define TEMP_BED_RESIDENCY_TIME 10 // (seconds) Time to wait for bed to "settle" in M190 +#define TEMP_BED_RESIDENCY_TIME 5 // (seconds) Time to wait for bed to "settle" in M190 #define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer #define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target @@ -458,15 +460,15 @@ // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. -#define HEATER_0_MINTEMP 5 -#define HEATER_1_MINTEMP 5 -#define HEATER_2_MINTEMP 5 -#define HEATER_3_MINTEMP 5 -#define HEATER_4_MINTEMP 5 -#define HEATER_5_MINTEMP 5 -#define HEATER_6_MINTEMP 5 -#define HEATER_7_MINTEMP 5 -#define BED_MINTEMP 5 +#define HEATER_0_MINTEMP 0 +#define HEATER_1_MINTEMP 0 +#define HEATER_2_MINTEMP 0 +#define HEATER_3_MINTEMP 0 +#define HEATER_4_MINTEMP 0 +#define HEATER_5_MINTEMP 0 +#define HEATER_6_MINTEMP 0 +#define HEATER_7_MINTEMP 0 +#define BED_MINTEMP 0 #define CHAMBER_MINTEMP 5 // Above this temperature the heater will be switched off. @@ -540,7 +542,7 @@ * heater. If your configuration is significantly different than this and you don't understand * the issues involved, don't use bed PID until someone else verifies that your hardware works. */ -//#define PIDTEMPBED +#define PIDTEMPBED //#define BED_LIMIT_SWITCHING @@ -556,8 +558,6 @@ //#define MIN_BED_POWER 0 //#define PID_BED_DEBUG // Sends debug data to the serial port. - // 120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - // from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) #define DEFAULT_bedKp 10.00 #define DEFAULT_bedKi .023 #define DEFAULT_bedKd 305.4 @@ -627,14 +627,14 @@ * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** */ #define PREVENT_COLD_EXTRUSION -#define EXTRUDE_MINTEMP 170 +#define EXTRUDE_MINTEMP 100 /** * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. * Note: For Bowden Extruders make this large enough to allow load/unload. */ #define PREVENT_LENGTHY_EXTRUDE -#define EXTRUDE_MAXLENGTH 200 +#define EXTRUDE_MAXLENGTH 1000 //=========================================================================== //======================== Thermal Runaway Protection ======================= @@ -806,7 +806,7 @@ * Override with M92 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 500 } +#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 98 } /** * Default Max Feed Rate (mm/s) @@ -841,9 +841,9 @@ * M204 R Retract Acceleration * M204 T Travel Acceleration */ -#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves +#define DEFAULT_ACCELERATION 500 // X, Y, Z and E acceleration for printing moves +#define DEFAULT_RETRACT_ACCELERATION 500 // E acceleration for retracts +#define DEFAULT_TRAVEL_ACCELERATION 500 // X, Y, Z acceleration for travel (non printing) moves /** * Default Jerk limits (mm/s) @@ -890,7 +890,7 @@ * * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained */ -//#define S_CURVE_ACCELERATION +#define S_CURVE_ACCELERATION //=========================================================================== //============================= Z Probe Options ============================= @@ -940,7 +940,7 @@ * Use G29 repeatedly, adjusting the Z height at each point with movement commands * or (with LCD_BED_LEVELING) the LCD controller. */ -//#define PROBE_MANUALLY +#define PROBE_MANUALLY /** * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. @@ -1059,10 +1059,10 @@ // Most probes should stay away from the edges of the bed, but // with NOZZLE_AS_PROBE this can be negative for a wider probing area. -#define PROBING_MARGIN 10 +#define PROBING_MARGIN 0 // X and Y axis travel speed (mm/min) between probes -#define XY_PROBE_FEEDRATE (133*60) +#define XY_PROBE_FEEDRATE (50*60) // Feedrate (mm/min) for the first approach when double-probing (MULTIPLE_PROBING == 2) #define Z_PROBE_FEEDRATE_FAST (4*60) @@ -1190,21 +1190,21 @@ // @section machine // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR false +#define INVERT_X_DIR true #define INVERT_Y_DIR true #define INVERT_Z_DIR false // @section extruder // For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR false -#define INVERT_E1_DIR false -#define INVERT_E2_DIR false -#define INVERT_E3_DIR false -#define INVERT_E4_DIR false -#define INVERT_E5_DIR false -#define INVERT_E6_DIR false -#define INVERT_E7_DIR false +#define INVERT_E0_DIR true +#define INVERT_E1_DIR true +#define INVERT_E2_DIR true +#define INVERT_E3_DIR true +#define INVERT_E4_DIR true +#define INVERT_E5_DIR true +#define INVERT_E6_DIR true +#define INVERT_E7_DIR true // @section homing @@ -1218,7 +1218,7 @@ */ //#define Z_IDLE_HEIGHT Z_HOME_POS -//#define Z_HOMING_HEIGHT 4 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ... +#define Z_HOMING_HEIGHT 5 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ... // Be sure to have this much clearance over your Z_MAX_POS to prevent grinding. //#define Z_AFTER_HOMING 10 // (mm) Height to move to after homing Z @@ -1232,8 +1232,8 @@ // @section machine // The size of the printable area -#define X_BED_SIZE 200 -#define Y_BED_SIZE 200 +#define X_BED_SIZE 280 +#define Y_BED_SIZE 220 // Travel limits (mm) after homing, corresponding to endstop positions. #define X_MIN_POS 0 @@ -1241,7 +1241,7 @@ #define Z_MIN_POS 0 #define X_MAX_POS X_BED_SIZE #define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 200 +#define Z_MAX_POS 160 /** * Software Endstops @@ -1269,7 +1269,7 @@ #endif #if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS) - //#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD + #define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD #endif /** @@ -1289,8 +1289,9 @@ #if ENABLED(FILAMENT_RUNOUT_SENSOR) #define FIL_RUNOUT_ENABLED_DEFAULT true // Enable the sensor on startup. Override with M412 followed by M500. #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. + #define FIL_RUNOUT_PIN 66 - #define FIL_RUNOUT_STATE LOW // Pin state indicating that filament is NOT present. + #define FIL_RUNOUT_STATE HIGH // Pin state indicating that filament is NOT present. #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. //#define WATCH_ALL_RUNOUT_SENSORS // Execute runout script on any triggering sensor, not only for the active extruder. @@ -1388,7 +1389,7 @@ //#define AUTO_BED_LEVELING_3POINT //#define AUTO_BED_LEVELING_LINEAR //#define AUTO_BED_LEVELING_BILINEAR -//#define AUTO_BED_LEVELING_UBL +#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING /** @@ -1396,7 +1397,7 @@ * these options to restore the prior leveling state or to always enable * leveling immediately after G28. */ -//#define RESTORE_LEVELING_AFTER_G28 +#define RESTORE_LEVELING_AFTER_G28 //#define ENABLE_LEVELING_AFTER_G28 /** @@ -1454,17 +1455,17 @@ #if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR) // Set the number of grid points per dimension. - #define GRID_MAX_POINTS_X 3 + #define GRID_MAX_POINTS_X 5 #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X // Probe along the Y axis, advancing X after each column - //#define PROBE_Y_FIRST + #define PROBE_Y_FIRST #if ENABLED(AUTO_BED_LEVELING_BILINEAR) // Beyond the probed grid, continue the implied tilt? // Default is to maintain the height of the nearest edge. - //#define EXTRAPOLATE_BEYOND_GRID + #define EXTRAPOLATE_BEYOND_GRID // // Experimental Subdivision of the grid by Catmull-Rom method. @@ -1486,8 +1487,8 @@ //#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh - #define MESH_INSET 1 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. + #define MESH_INSET 0 // Set Mesh bounds as an inset region of the bed + #define GRID_MAX_POINTS_X 5 // Don't use more than 15 points per axis, implementation limited. #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X //#define UBL_HILBERT_CURVE // Use Hilbert distribution for less travel when probing multiple points @@ -1495,7 +1496,7 @@ #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 - //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used + #define UBL_Z_RAISE_WHEN_OFF_MESH 0 // When the nozzle is off the mesh, this value is used // as the Z-Height correction value. //#define UBL_MESH_WIZARD // Run several commands in a row to get a complete mesh @@ -1506,7 +1507,7 @@ //=================================== Mesh ================================== //=========================================================================== - #define MESH_INSET 10 // Set Mesh bounds as an inset region of the bed + #define MESH_INSET 0 // Set Mesh bounds as an inset region of the bed #define GRID_MAX_POINTS_X 3 // Don't use more than 7 points per axis, implementation limited. #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X @@ -1672,12 +1673,12 @@ * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) */ -//#define EEPROM_SETTINGS // Persistent storage with M500 and M501 +#define EEPROM_SETTINGS // Persistent storage with M500 and M501 //#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. #define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load #if ENABLED(EEPROM_SETTINGS) - //#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. + #define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. #endif // @@ -1706,14 +1707,14 @@ // Preheat Constants - Up to 5 are supported without changes // #define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 180 -#define PREHEAT_1_TEMP_BED 70 +#define PREHEAT_1_TEMP_HOTEND 200 +#define PREHEAT_1_TEMP_BED 60 #define PREHEAT_1_TEMP_CHAMBER 35 #define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 #define PREHEAT_2_LABEL "ABS" -#define PREHEAT_2_TEMP_HOTEND 240 -#define PREHEAT_2_TEMP_BED 110 +#define PREHEAT_2_TEMP_HOTEND 250 +#define PREHEAT_2_TEMP_BED 100 #define PREHEAT_2_TEMP_CHAMBER 35 #define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 @@ -1728,11 +1729,11 @@ * P1 Raise the nozzle always to Z-park height. * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. */ -//#define NOZZLE_PARK_FEATURE +#define NOZZLE_PARK_FEATURE #if ENABLED(NOZZLE_PARK_FEATURE) // Specify a park position as { X, Y, Z_raise } - #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 } + #define NOZZLE_PARK_POINT { (X_MIN_POS + 20), (Y_MIN_POS + 20),Z_MIN_POS + 20 } //#define NOZZLE_PARK_X_ONLY // X move only is required to park //#define NOZZLE_PARK_Y_ONLY // Y move only is required to park #define NOZZLE_PARK_Z_RAISE_MIN 2 // (mm) Always raise Z by at least this distance @@ -1936,7 +1937,8 @@ * SD Card support is disabled by default. If your controller has an SD slot, * you must uncomment the following option or it won't work. */ -//#define SDSUPPORT +#define SDSUPPORT +#define SDIO_SUPPORT /** * SD CARD: ENABLE CRC @@ -2006,7 +2008,7 @@ // // Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. // -//#define INDIVIDUAL_AXIS_HOMING_MENU +#define INDIVIDUAL_AXIS_HOMING_MENU // // SPEAKER/BUZZER @@ -2014,7 +2016,7 @@ // If you have a speaker that can produce tones, enable it here. // By default Marlin assumes you have a buzzer with a fixed frequency. // -//#define SPEAKER +#define SPEAKER // // The duration and frequency for the UI feedback sound. @@ -2023,8 +2025,8 @@ // Note: Test audio output with the G-Code: // M300 S P // -//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 -//#define LCD_FEEDBACK_FREQUENCY_HZ 5000 +#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 50 +#define LCD_FEEDBACK_FREQUENCY_HZ 10 //============================================================================= //======================== LCD / Controller Selection ========================= @@ -2037,7 +2039,7 @@ // // Note: Usually sold with a white PCB. // -//#define REPRAP_DISCOUNT_SMART_CONTROLLER +#define REPRAP_DISCOUNT_SMART_CONTROLLER // // GT2560 (YHCB2004) LCD Display @@ -2196,6 +2198,9 @@ // https://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller // //#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER +//#define ST7920_DELAY_1 DELAY_NS(125) +//#define ST7920_DELAY_2 DELAY_NS(125) +//#define ST7920_DELAY_3 DELAY_NS(125) // // K.3D Full Graphic Smart Controller @@ -2618,7 +2623,7 @@ // Use software PWM to drive the fan, as for the heaters. This uses a very low frequency // which is not as annoying as with the hardware PWM. On the other hand, if this frequency // is too low, you should also increment SOFT_PWM_SCALE. -//#define FAN_SOFT_PWM +#define FAN_SOFT_PWM // Incrementing this by 1 will double the software PWM frequency, // affecting heaters, and the fan if FAN_SOFT_PWM is enabled. diff --git a/config/examples/Geeetech/M201/Configuration_adv.h b/config/examples/Geeetech/M201/Configuration_adv.h index 5335fa012a..8f45bd2773 100644 --- a/config/examples/Geeetech/M201/Configuration_adv.h +++ b/config/examples/Geeetech/M201/Configuration_adv.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Geeetech/M201" + /** * Configuration_adv.h * @@ -307,7 +309,7 @@ #if ENABLED(PIDTEMP) // Add an experimental additional term to the heater power, proportional to the extrusion speed. // A well-chosen Kc value should add just enough power to melt the increased material volume. - //#define PID_EXTRUSION_SCALING + #define PID_EXTRUSION_SCALING #if ENABLED(PID_EXTRUSION_SCALING) #define DEFAULT_Kc (100) // heating power = Kc * e_speed #define LPQ_MAX_LEN 50 @@ -341,7 +343,7 @@ * 5. Enable PID_FAN_SCALING_ALTERNATIVE_DEFINITION and enter the two identified Kf-values in * PID_FAN_SCALING_AT_FULL_SPEED and PID_FAN_SCALING_AT_MIN_SPEED. Enter the minimum speed in PID_FAN_SCALING_MIN_SPEED */ - //#define PID_FAN_SCALING + #define PID_FAN_SCALING #if ENABLED(PID_FAN_SCALING) //#define PID_FAN_SCALING_ALTERNATIVE_DEFINITION #if ENABLED(PID_FAN_SCALING_ALTERNATIVE_DEFINITION) @@ -411,14 +413,14 @@ // The number of consecutive low temperature errors that can occur // before a min_temp_error is triggered. (Shouldn't be more than 10.) -//#define MAX_CONSECUTIVE_LOW_TEMPERATURE_ERROR_ALLOWED 0 +//#define MAX_CONSECUTIVE_LOW_TEMPERATURE_ERROR_ALLOWED 10 // The number of milliseconds a hotend will preheat before starting to check // the temperature. This value should NOT be set to the time it takes the // hot end to reach the target temperature, but the time it takes to reach // the minimum temperature your thermistor can read. The lower the better/safer. // This shouldn't need to be more than 30 seconds (30000) -//#define MILLISECONDS_PREHEAT_TIME 0 +//#define MILLISECONDS_PREHEAT_TIME 30000 // @section extruder @@ -736,13 +738,13 @@ //#define SENSORLESS_BACKOFF_MM { 2, 2 } // (mm) Backoff from endstops before sensorless homing -#define HOMING_BUMP_MM { 5, 5, 2 } // (mm) Backoff from endstops after first bump -#define HOMING_BUMP_DIVISOR { 2, 2, 4 } // Re-Bump Speed Divisor (Divides the Homing Feedrate) +#define HOMING_BUMP_MM { 5, 5, 5 } // (mm) Backoff from endstops after first bump +#define HOMING_BUMP_DIVISOR { 4, 4, 4 } // Re-Bump Speed Divisor (Divides the Homing Feedrate) //#define HOMING_BACKOFF_POST_MM { 2, 2, 2 } // (mm) Backoff from endstops after homing //#define QUICK_HOME // If G28 contains XY do a diagonal move first -//#define HOME_Y_BEFORE_X // If G28 contains XY home Y before X +#define HOME_Y_BEFORE_X // If G28 contains XY home Y before X //#define HOME_Z_FIRST // Home Z first. Requires a Z-MIN endstop (not a probe). //#define CODEPENDENT_XY_HOMING // If X/Y can't home without homing Y/X first @@ -826,7 +828,7 @@ // Define probe X and Y positions for Z1, Z2 [, Z3 [, Z4]] // If not defined, probe limits will be used. // Override with 'M422 S X Y' - //#define Z_STEPPER_ALIGN_XY { { 10, 190 }, { 100, 10 }, { 190, 190 } } + //#define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } /** * Orientation for the automatically-calculated probe positions. @@ -867,7 +869,7 @@ // On a 300mm bed a 5% grade would give a misalignment of ~1.5cm #define G34_MAX_GRADE 5 // (%) Maximum incline that G34 will handle - #define Z_STEPPER_ALIGN_ITERATIONS 5 // Number of iterations to apply during alignment + #define Z_STEPPER_ALIGN_ITERATIONS 3 // Number of iterations to apply during alignment #define Z_STEPPER_ALIGN_ACC 0.02 // Stop iterating early if the accuracy is better than this #define RESTORE_LEVELING_AFTER_G34 // Restore leveling after G34 is done? // After G34, re-home Z (G28 Z) or just calculate it from the last probe heights? @@ -1790,20 +1792,20 @@ * * Warning: Does not respect endstops! */ -//#define BABYSTEPPING +#define BABYSTEPPING #if ENABLED(BABYSTEPPING) //#define INTEGRATED_BABYSTEPPING // EXPERIMENTAL integration of babystepping into the Stepper ISR //#define BABYSTEP_WITHOUT_HOMING - //#define BABYSTEP_ALWAYS_AVAILABLE // Allow babystepping at all times (not just during movement). + #define BABYSTEP_ALWAYS_AVAILABLE // Allow babystepping at all times (not just during movement). //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way //#define BABYSTEP_MILLIMETER_UNITS // Specify BABYSTEP_MULTIPLICATOR_(XY|Z) in mm instead of micro-steps #define BABYSTEP_MULTIPLICATOR_Z 1 // (steps or mm) Steps or millimeter distance for each Z babystep #define BABYSTEP_MULTIPLICATOR_XY 1 // (steps or mm) Steps or millimeter distance for each XY babystep - //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. + #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 2000 // Maximum interval between clicks, in milliseconds. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on doubleclick when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) @@ -1837,12 +1839,12 @@ * * See https://marlinfw.org/docs/features/lin_advance.html for full instructions. */ -//#define LIN_ADVANCE +#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants - #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed + #define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants + #define LIN_ADVANCE_K 0 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // If enabled, this will generate debug information output over USB. - //#define EXPERIMENTAL_SCURVE // Enable this option to permit S-Curve Acceleration + #define EXPERIMENTAL_SCURVE // Enable this option to permit S-Curve Acceleration #endif // @section leveling @@ -1989,13 +1991,13 @@ #define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle //#define ARC_SEGMENTS_PER_SEC 50 // Use feedrate to choose segment length (with MM_PER_ARC_SEGMENT as the minimum) #define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections - //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles - //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes + #define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles + #define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes //#define SF_ARC_FIX // Enable only if using SkeinForge with "Arc Point" fillet procedure #endif -// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes. -//#define BEZIER_CURVE_SUPPORT +// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes. - unused by most slicers +#define BEZIER_CURVE_SUPPORT /** * Direct Stepping @@ -2170,7 +2172,7 @@ //#define NO_TIMEOUTS 1000 // Milliseconds // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. -//#define ADVANCED_OK +#define ADVANCED_OK // Printrun may have trouble receiving long strings all at once. // This option inserts short delays between lines of serial output. @@ -2313,47 +2315,47 @@ */ //#define ADVANCED_PAUSE_FEATURE #if ENABLED(ADVANCED_PAUSE_FEATURE) - #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. + #define PAUSE_PARK_RETRACT_FEEDRATE 10 // (mm/s) Initial retract feedrate. #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. // This short retract is done immediately, before parking the nozzle. #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast. #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload. + #define FILAMENT_CHANGE_UNLOAD_LENGTH 450 // (mm) The length of filament for a complete unload. // For Bowden, the full length of the tube and nozzle. // For direct drive, the full length of the nozzle. // Set to 0 for manual unloading. - #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE 6 // (mm/s) Slow move when starting load. - #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 0 // (mm) Slow length, to allow time to insert material. + #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE 5 // (mm/s) Slow move when starting load. + #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 300 // (mm) Slow length, to allow time to insert material. // 0 to disable start loading and skip to fast load only - #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast. + #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 10 // (mm/s) Load filament feedrate. This can be pretty fast. #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle. + #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 300 // (mm) Load length of filament, from extruder gear to nozzle. // For Bowden, the full length of the tube and nozzle. // For direct drive, the full length of the nozzle. //#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted. - #define ADVANCED_PAUSE_PURGE_FEEDRATE 3 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate. - #define ADVANCED_PAUSE_PURGE_LENGTH 50 // (mm) Length to extrude after loading. + #define ADVANCED_PAUSE_PURGE_FEEDRATE 5 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate. + #define ADVANCED_PAUSE_PURGE_LENGTH 25 // (mm) Length to extrude after loading. // Set to 0 for manual extrusion. // Filament can be extruded repeatedly from the Filament Change menu // until extrusion is consistent, and to purge old filament. - #define ADVANCED_PAUSE_RESUME_PRIME 0 // (mm) Extra distance to prime nozzle after returning from park. + #define ADVANCED_PAUSE_RESUME_PRIME 1 // (mm) Extra distance to prime nozzle after returning from park. //#define ADVANCED_PAUSE_FANS_PAUSE // Turn off print-cooling fans while the machine is paused. // Filament Unload does a Retract, Delay, and Purge first: - #define FILAMENT_UNLOAD_PURGE_RETRACT 13 // (mm) Unload initial retract length. + #define FILAMENT_UNLOAD_PURGE_RETRACT 20 // (mm) Unload initial retract length. #define FILAMENT_UNLOAD_PURGE_DELAY 5000 // (ms) Delay for the filament to cool after retract. - #define FILAMENT_UNLOAD_PURGE_LENGTH 8 // (mm) An unretract is done, then this length is purged. + #define FILAMENT_UNLOAD_PURGE_LENGTH 10 // (mm) An unretract is done, then this length is purged. #define FILAMENT_UNLOAD_PURGE_FEEDRATE 25 // (mm/s) feedrate to purge before unload - #define PAUSE_PARK_NOZZLE_TIMEOUT 45 // (seconds) Time limit before the nozzle is turned off for safety. + #define PAUSE_PARK_NOZZLE_TIMEOUT 60 // (seconds) Time limit before the nozzle is turned off for safety. #define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed. #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change. - //#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. - //#define HOME_BEFORE_FILAMENT_CHANGE // If needed, home before parking for filament change + #define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. + #define HOME_BEFORE_FILAMENT_CHANGE // If needed, home before parking for filament change - //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. - //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) + #define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. + #define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) #endif // @section tmc @@ -3650,9 +3652,9 @@ * Host Prompt Support enables Marlin to use the host for user prompts so * filament runout and other processes can be managed from the host side. */ -//#define HOST_ACTION_COMMANDS +#define HOST_ACTION_COMMANDS #if ENABLED(HOST_ACTION_COMMANDS) - //#define HOST_PROMPT_SUPPORT + #define HOST_PROMPT_SUPPORT //#define HOST_START_MENU_ITEM // Add a menu item that tells the host to start #endif diff --git a/config/examples/Geeetech/MeCreator2/Configuration.h b/config/examples/Geeetech/MeCreator2/Configuration.h index 78c2dc9160..c49e6bd0be 100644 --- a/config/examples/Geeetech/MeCreator2/Configuration.h +++ b/config/examples/Geeetech/MeCreator2/Configuration.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Geeetech/MeCreator2" + /** * Configuration.h * @@ -69,7 +71,7 @@ // @section info // Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes. +#define STRING_CONFIG_H_AUTHOR "(Phr3d13, MeCreator2)" // Who made the changes. //#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) /** @@ -134,11 +136,11 @@ // Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_RAMPS_14_EFB + #define MOTHERBOARD BOARD_GT2560_V3_MC2 #endif // Name displayed in the LCD "Ready" message and Info menu -//#define CUSTOM_MACHINE_NAME "3D Printer" +#define CUSTOM_MACHINE_NAME "MeCreator2" // Printer's unique ID, used by some programs to differentiate between machines. // Choose your own or use a service like https://www.uuidgenerator.net/version4 @@ -424,7 +426,7 @@ #define TEMP_SENSOR_5 0 #define TEMP_SENSOR_6 0 #define TEMP_SENSOR_7 0 -#define TEMP_SENSOR_BED 0 +#define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 #define TEMP_SENSOR_COOLER 0 @@ -510,16 +512,17 @@ //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) // Set/get with gcode: M301 E[extruder number, 0-2] + // MeCreator2 #if ENABLED(PID_PARAMS_PER_HOTEND) // Specify between 1 and HOTENDS values per array. // If fewer than EXTRUDER values are provided, the last element will be repeated. - #define DEFAULT_Kp_LIST { 22.20, 22.20 } - #define DEFAULT_Ki_LIST { 1.08, 1.08 } - #define DEFAULT_Kd_LIST { 114.00, 114.00 } + #define DEFAULT_Kp_LIST { 11.93, 11.93 } + #define DEFAULT_Ki_LIST { 0.59, 0.59 } + #define DEFAULT_Kd_LIST { 59.89, 59.89 } #else - #define DEFAULT_Kp 22.20 - #define DEFAULT_Ki 1.08 - #define DEFAULT_Kd 114.00 + #define DEFAULT_Kp 11.93 + #define DEFAULT_Ki 0.59 + #define DEFAULT_Kd 59.89 #endif #endif // PIDTEMP @@ -555,12 +558,10 @@ #if ENABLED(PIDTEMPBED) //#define MIN_BED_POWER 0 //#define PID_BED_DEBUG // Sends debug data to the serial port. - - // 120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - // from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) - #define DEFAULT_bedKp 10.00 - #define DEFAULT_bedKi .023 - #define DEFAULT_bedKd 305.4 + // MeCreator2 generated by Autotune + #define DEFAULT_bedKp 182.46 // 175.68 189.95 + #define DEFAULT_bedKi 35.92 // 34.59 37.40 + #define DEFAULT_bedKd 231.70 // 223.07 241.19 // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. #endif // PIDTEMPBED @@ -634,7 +635,7 @@ * Note: For Bowden Extruders make this large enough to allow load/unload. */ #define PREVENT_LENGTHY_EXTRUDE -#define EXTRUDE_MAXLENGTH 200 +#define EXTRUDE_MAXLENGTH 500 //=========================================================================== //======================== Thermal Runaway Protection ======================= @@ -683,11 +684,11 @@ // Specify here all the endstop connectors that are connected to any endstop or probe. // Almost all printers will be using one per axis. Probes will use one or more of the // extra connectors. Leave undefined any used for non-endstop and non-probe purposes. -#define USE_XMIN_PLUG -#define USE_YMIN_PLUG +//#define USE_XMIN_PLUG +//#define USE_YMIN_PLUG #define USE_ZMIN_PLUG -//#define USE_XMAX_PLUG -//#define USE_YMAX_PLUG +#define USE_XMAX_PLUG +#define USE_YMAX_PLUG //#define USE_ZMAX_PLUG // Enable pullup for all endstops to prevent a floating state @@ -719,11 +720,11 @@ // Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). #define X_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. #define Y_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define X_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. +#define Z_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define X_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Y_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. #define Z_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_PROBE_ENDSTOP_INVERTING false // Set to true to invert the logic of the probe. +#define Z_MIN_PROBE_ENDSTOP_INVERTING true // Set to true to invert the logic of the probe. /** * Stepper Drivers @@ -806,14 +807,14 @@ * Override with M92 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 500 } +#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 95 } /** * Default Max Feed Rate (mm/s) * Override with M203 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 } +#define DEFAULT_MAX_FEEDRATE { 250, 250, 400, 45 } //#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 #if ENABLED(LIMITED_MAX_FR_EDITING) @@ -826,7 +827,7 @@ * Override with M201 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 } +#define DEFAULT_MAX_ACCELERATION { 2000, 2000, 100, 10000 } //#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 #if ENABLED(LIMITED_MAX_ACCEL_EDITING) @@ -841,9 +842,9 @@ * M204 R Retract Acceleration * M204 T Travel Acceleration */ -#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves +#define DEFAULT_ACCELERATION 2000 // X, Y, Z and E acceleration for printing moves +#define DEFAULT_RETRACT_ACCELERATION 2000 // E acceleration for retracts +#define DEFAULT_TRAVEL_ACCELERATION 2000 // X, Y, Z acceleration for travel (non printing) moves /** * Default Jerk limits (mm/s) @@ -855,9 +856,9 @@ */ //#define CLASSIC_JERK #if ENABLED(CLASSIC_JERK) - #define DEFAULT_XJERK 10.0 - #define DEFAULT_YJERK 10.0 - #define DEFAULT_ZJERK 0.3 + #define DEFAULT_XJERK 2 + #define DEFAULT_YJERK 2 + #define DEFAULT_ZJERK 0.6 //#define TRAVEL_EXTRA_XYJERK 0.0 // Additional jerk allowance for all travel moves @@ -867,7 +868,7 @@ #endif #endif -#define DEFAULT_EJERK 5.0 // May be used by Linear Advance +#define DEFAULT_EJERK 50.0 // May be used by Linear Advance /** * Junction Deviation Factor @@ -877,7 +878,7 @@ * https://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html */ #if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.013 // (mm) Distance from real junction edge + #define JUNCTION_DEVIATION_MM 0.001 // (mm) Distance from real junction edge #define JD_HANDLE_SMALL_SEGMENTS // Use curvature estimation instead of just the junction angle // for small segments (< 1mm) with large junction angles (> 135°). #endif @@ -1065,7 +1066,7 @@ #define XY_PROBE_FEEDRATE (133*60) // Feedrate (mm/min) for the first approach when double-probing (MULTIPLE_PROBING == 2) -#define Z_PROBE_FEEDRATE_FAST (4*60) +#define Z_PROBE_FEEDRATE_FAST (12*60) // Feedrate (mm/min) for the "accurate" probe of each point #define Z_PROBE_FEEDRATE_SLOW (Z_PROBE_FEEDRATE_FAST / 2) @@ -1190,14 +1191,14 @@ // @section machine // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR false +#define INVERT_X_DIR true #define INVERT_Y_DIR true -#define INVERT_Z_DIR false +#define INVERT_Z_DIR true // @section extruder // For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR false +#define INVERT_E0_DIR true #define INVERT_E1_DIR false #define INVERT_E2_DIR false #define INVERT_E3_DIR false @@ -1225,23 +1226,23 @@ // Direction of endstops when homing; 1=MAX, -1=MIN // :[-1,1] -#define X_HOME_DIR -1 -#define Y_HOME_DIR -1 +#define X_HOME_DIR 1 +#define Y_HOME_DIR 1 #define Z_HOME_DIR -1 // @section machine // The size of the printable area -#define X_BED_SIZE 200 -#define Y_BED_SIZE 200 +#define X_BED_SIZE 160 +#define Y_BED_SIZE 160 // Travel limits (mm) after homing, corresponding to endstop positions. -#define X_MIN_POS 0 -#define Y_MIN_POS 0 +#define X_MIN_POS -15 +#define Y_MIN_POS -5 #define Z_MIN_POS 0 #define X_MAX_POS X_BED_SIZE #define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 200 +#define Z_MAX_POS 162 /** * Software Endstops @@ -1527,7 +1528,7 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS +#define LEVEL_BED_CORNERS #if ENABLED(LEVEL_BED_CORNERS) #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets @@ -1595,7 +1596,7 @@ #endif // Homing speeds (mm/min) -#define HOMING_FEEDRATE_MM_M { (50*60), (50*60), (4*60) } +#define HOMING_FEEDRATE_MM_M { (40*60), (40*60), (12*60) } // Validate that endstops are triggered on homing moves #define VALIDATE_HOMING_ENDSTOPS @@ -1672,7 +1673,7 @@ * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) */ -//#define EEPROM_SETTINGS // Persistent storage with M500 and M501 +#define EEPROM_SETTINGS // Persistent storage with M500 and M501 //#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. #define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load @@ -1706,14 +1707,14 @@ // Preheat Constants - Up to 5 are supported without changes // #define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 180 -#define PREHEAT_1_TEMP_BED 70 +#define PREHEAT_1_TEMP_HOTEND 190 +#define PREHEAT_1_TEMP_BED 60 #define PREHEAT_1_TEMP_CHAMBER 35 #define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 #define PREHEAT_2_LABEL "ABS" #define PREHEAT_2_TEMP_HOTEND 240 -#define PREHEAT_2_TEMP_BED 110 +#define PREHEAT_2_TEMP_BED 100 #define PREHEAT_2_TEMP_CHAMBER 35 #define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 @@ -1845,7 +1846,7 @@ * * View the current statistics with M78. */ -//#define PRINTCOUNTER +#define PRINTCOUNTER #if ENABLED(PRINTCOUNTER) #define PRINTCOUNTER_SAVE_INTERVAL 60 // (minutes) EEPROM save interval during print #endif @@ -1936,7 +1937,7 @@ * SD Card support is disabled by default. If your controller has an SD slot, * you must uncomment the following option or it won't work. */ -//#define SDSUPPORT +#define SDSUPPORT /** * SD CARD: ENABLE CRC @@ -2037,7 +2038,7 @@ // // Note: Usually sold with a white PCB. // -//#define REPRAP_DISCOUNT_SMART_CONTROLLER +#define REPRAP_DISCOUNT_SMART_CONTROLLER // // GT2560 (YHCB2004) LCD Display diff --git a/config/examples/Geeetech/MeCreator2/Configuration_adv.h b/config/examples/Geeetech/MeCreator2/Configuration_adv.h index 5335fa012a..cbf3810d4d 100644 --- a/config/examples/Geeetech/MeCreator2/Configuration_adv.h +++ b/config/examples/Geeetech/MeCreator2/Configuration_adv.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Geeetech/MeCreator2" + /** * Configuration_adv.h * @@ -573,15 +575,15 @@ /** * M355 Case Light on-off / brightness */ -//#define CASE_LIGHT_ENABLE +#define CASE_LIGHT_ENABLE #if ENABLED(CASE_LIGHT_ENABLE) - //#define CASE_LIGHT_PIN 4 // Override the default pin if needed + #define CASE_LIGHT_PIN 6 // Override the default pin if needed #define INVERT_CASE_LIGHT false // Set true if Case Light is ON when pin is LOW #define CASE_LIGHT_DEFAULT_ON true // Set default power-up state on #define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // Set default power-up brightness (0-255, requires PWM pin) //#define CASE_LIGHT_NO_BRIGHTNESS // Disable brightness control. Enable for non-PWM lighting. //#define CASE_LIGHT_MAX_PWM 128 // Limit PWM duty cycle (0-255) - //#define CASE_LIGHT_MENU // Add Case Light options to the LCD menu + #define CASE_LIGHT_MENU // Add Case Light options to the LCD menu #if ENABLED(NEOPIXEL_LED) //#define CASE_LIGHT_USE_NEOPIXEL // Use NeoPixel LED as case light #endif @@ -867,7 +869,7 @@ // On a 300mm bed a 5% grade would give a misalignment of ~1.5cm #define G34_MAX_GRADE 5 // (%) Maximum incline that G34 will handle - #define Z_STEPPER_ALIGN_ITERATIONS 5 // Number of iterations to apply during alignment + #define Z_STEPPER_ALIGN_ITERATIONS 3 // Number of iterations to apply during alignment #define Z_STEPPER_ALIGN_ACC 0.02 // Stop iterating early if the accuracy is better than this #define RESTORE_LEVELING_AFTER_G34 // Restore leveling after G34 is done? // After G34, re-home Z (G28 Z) or just calculate it from the last probe heights? @@ -1837,11 +1839,10 @@ * * See https://marlinfw.org/docs/features/lin_advance.html for full instructions. */ -//#define LIN_ADVANCE +#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants - #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed - //#define LA_DEBUG // If enabled, this will generate debug information output over USB. + #define LIN_ADVANCE_K 0.05 // Unit: mm compression per 1mm/s extruder speed + //#define LA_DEBUG // If enabled, this will generate debug information output over USB. //#define EXPERIMENTAL_SCURVE // Enable this option to permit S-Curve Acceleration #endif diff --git a/config/examples/Geeetech/Me_creator/Configuration.h b/config/examples/Geeetech/Me_creator/Configuration.h index 78c2dc9160..2df78ed7d7 100644 --- a/config/examples/Geeetech/Me_creator/Configuration.h +++ b/config/examples/Geeetech/Me_creator/Configuration.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Geeetech/Me_creator" + /** * Configuration.h * @@ -134,7 +136,7 @@ // Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_RAMPS_14_EFB +#define MOTHERBOARD BOARD_RAMPS_13_EFB // Some had BOARD_SANGUINOLOLU_12 #endif // Name displayed in the LCD "Ready" message and Info menu @@ -318,8 +320,8 @@ * Enable and connect the power supply to the PS_ON_PIN. * Specify whether the power supply is active HIGH or active LOW. */ -//#define PSU_CONTROL -//#define PSU_NAME "Power Supply" +#define PSU_CONTROL +#define PSU_NAME "Power Supply" #if ENABLED(PSU_CONTROL) #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box @@ -424,7 +426,7 @@ #define TEMP_SENSOR_5 0 #define TEMP_SENSOR_6 0 #define TEMP_SENSOR_7 0 -#define TEMP_SENSOR_BED 0 +#define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 #define TEMP_SENSOR_COOLER 0 @@ -684,10 +686,10 @@ // Almost all printers will be using one per axis. Probes will use one or more of the // extra connectors. Leave undefined any used for non-endstop and non-probe purposes. #define USE_XMIN_PLUG -#define USE_YMIN_PLUG +//#define USE_YMIN_PLUG #define USE_ZMIN_PLUG //#define USE_XMAX_PLUG -//#define USE_YMAX_PLUG +#define USE_YMAX_PLUG //#define USE_ZMAX_PLUG // Enable pullup for all endstops to prevent a floating state @@ -752,7 +754,7 @@ //#define Z3_DRIVER_TYPE A4988 //#define Z4_DRIVER_TYPE A4988 #define E0_DRIVER_TYPE A4988 -//#define E1_DRIVER_TYPE A4988 +#define E1_DRIVER_TYPE A4988 //#define E2_DRIVER_TYPE A4988 //#define E3_DRIVER_TYPE A4988 //#define E4_DRIVER_TYPE A4988 @@ -776,7 +778,7 @@ * * :[2,3,4,5,6,7] */ -//#define ENDSTOP_NOISE_THRESHOLD 2 +#define ENDSTOP_NOISE_THRESHOLD 2 // Check for stuck or disconnected endstops during homing moves. //#define DETECT_BROKEN_ENDSTOP @@ -799,14 +801,14 @@ * following movement settings. If fewer factors are given than the * total number of extruders, the last value applies to the rest. */ -//#define DISTINCT_E_FACTORS +#define DISTINCT_E_FACTORS /** * Default Axis Steps Per Unit (steps/mm) * Override with M92 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 500 } +#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 2560, 100 } /** * Default Max Feed Rate (mm/s) @@ -890,7 +892,7 @@ * * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained */ -//#define S_CURVE_ACCELERATION +#define S_CURVE_ACCELERATION //=========================================================================== //============================= Z Probe Options ============================= @@ -940,7 +942,7 @@ * Use G29 repeatedly, adjusting the Z height at each point with movement commands * or (with LCD_BED_LEVELING) the LCD controller. */ -//#define PROBE_MANUALLY +#define PROBE_MANUALLY /** * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. @@ -1055,14 +1057,14 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +#define NOZZLE_TO_PROBE_OFFSET { -25, -29, 0 } // Most probes should stay away from the edges of the bed, but // with NOZZLE_AS_PROBE this can be negative for a wider probing area. -#define PROBING_MARGIN 10 +#define PROBING_MARGIN 0 // X and Y axis travel speed (mm/min) between probes -#define XY_PROBE_FEEDRATE (133*60) +#define XY_PROBE_FEEDRATE (50*60) // Feedrate (mm/min) for the first approach when double-probing (MULTIPLE_PROBING == 2) #define Z_PROBE_FEEDRATE_FAST (4*60) @@ -1192,7 +1194,7 @@ // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR false #define INVERT_Y_DIR true -#define INVERT_Z_DIR false +#define INVERT_Z_DIR true // @section extruder @@ -1218,7 +1220,7 @@ */ //#define Z_IDLE_HEIGHT Z_HOME_POS -//#define Z_HOMING_HEIGHT 4 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ... +#define Z_HOMING_HEIGHT 4 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ... // Be sure to have this much clearance over your Z_MAX_POS to prevent grinding. //#define Z_AFTER_HOMING 10 // (mm) Height to move to after homing Z @@ -1226,14 +1228,14 @@ // Direction of endstops when homing; 1=MAX, -1=MIN // :[-1,1] #define X_HOME_DIR -1 -#define Y_HOME_DIR -1 +#define Y_HOME_DIR 1 #define Z_HOME_DIR -1 // @section machine // The size of the printable area -#define X_BED_SIZE 200 -#define Y_BED_SIZE 200 +#define X_BED_SIZE 160 +#define Y_BED_SIZE 160 // Travel limits (mm) after homing, corresponding to endstop positions. #define X_MIN_POS 0 @@ -1241,7 +1243,7 @@ #define Z_MIN_POS 0 #define X_MAX_POS X_BED_SIZE #define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 200 +#define Z_MAX_POS 155 /** * Software Endstops @@ -1387,7 +1389,7 @@ */ //#define AUTO_BED_LEVELING_3POINT //#define AUTO_BED_LEVELING_LINEAR -//#define AUTO_BED_LEVELING_BILINEAR +#define AUTO_BED_LEVELING_BILINEAR //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING @@ -1396,7 +1398,7 @@ * these options to restore the prior leveling state or to always enable * leveling immediately after G28. */ -//#define RESTORE_LEVELING_AFTER_G28 +#define RESTORE_LEVELING_AFTER_G28 //#define ENABLE_LEVELING_AFTER_G28 /** @@ -1518,22 +1520,22 @@ * Add a bed leveling sub-menu for ABL or MBL. * Include a guided procedure if manual probing is enabled. */ -//#define LCD_BED_LEVELING +#define LCD_BED_LEVELING #if ENABLED(LCD_BED_LEVELING) #define MESH_EDIT_Z_STEP 0.025 // (mm) Step size while manually probing Z axis. #define LCD_PROBE_Z_RANGE 4 // (mm) Z Range centered on Z_MIN_POS for LCD Z adjustment - //#define MESH_EDIT_MENU // Add a menu to edit mesh points + #define MESH_EDIT_MENU // Add a menu to edit mesh points #endif // Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS +#define LEVEL_BED_CORNERS #if ENABLED(LEVEL_BED_CORNERS) #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner + #define LEVEL_CENTER_TOO // Move to the center after the last corner //#define LEVEL_CORNERS_USE_PROBE #if ENABLED(LEVEL_CORNERS_USE_PROBE) #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 @@ -1587,7 +1589,7 @@ // - Move the Z probe (or nozzle) to a defined XY point before Z Homing. // - Prevent Z homing when the Z probe is outside bed area. // -//#define Z_SAFE_HOMING +#define Z_SAFE_HOMING #if ENABLED(Z_SAFE_HOMING) #define Z_SAFE_HOMING_X_POINT X_CENTER // X point for Z homing @@ -1672,12 +1674,12 @@ * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) */ -//#define EEPROM_SETTINGS // Persistent storage with M500 and M501 +#define EEPROM_SETTINGS // Persistent storage with M500 and M501 //#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. #define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load #if ENABLED(EEPROM_SETTINGS) - //#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. + #define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. #endif // @@ -1936,7 +1938,7 @@ * SD Card support is disabled by default. If your controller has an SD slot, * you must uncomment the following option or it won't work. */ -//#define SDSUPPORT +#define SDSUPPORT /** * SD CARD: ENABLE CRC @@ -2006,7 +2008,7 @@ // // Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. // -//#define INDIVIDUAL_AXIS_HOMING_MENU +#define INDIVIDUAL_AXIS_HOMING_MENU // // SPEAKER/BUZZER @@ -2014,7 +2016,7 @@ // If you have a speaker that can produce tones, enable it here. // By default Marlin assumes you have a buzzer with a fixed frequency. // -//#define SPEAKER +#define SPEAKER // // The duration and frequency for the UI feedback sound. @@ -2023,8 +2025,8 @@ // Note: Test audio output with the G-Code: // M300 S P // -//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 -//#define LCD_FEEDBACK_FREQUENCY_HZ 5000 +#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 +#define LCD_FEEDBACK_FREQUENCY_HZ 5000 //============================================================================= //======================== LCD / Controller Selection ========================= @@ -2061,7 +2063,7 @@ // // ULTIPANEL as seen on Thingiverse. // -//#define ULTIPANEL +#define ULTIPANEL // // PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3) @@ -2618,7 +2620,7 @@ // Use software PWM to drive the fan, as for the heaters. This uses a very low frequency // which is not as annoying as with the hardware PWM. On the other hand, if this frequency // is too low, you should also increment SOFT_PWM_SCALE. -//#define FAN_SOFT_PWM +#define FAN_SOFT_PWM // Incrementing this by 1 will double the software PWM frequency, // affecting heaters, and the fan if FAN_SOFT_PWM is enabled. diff --git a/config/examples/Geeetech/Me_creator/Configuration_adv.h b/config/examples/Geeetech/Me_creator/Configuration_adv.h index 5335fa012a..2600fe2733 100644 --- a/config/examples/Geeetech/Me_creator/Configuration_adv.h +++ b/config/examples/Geeetech/Me_creator/Configuration_adv.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Geeetech/Me_creator" + /** * Configuration_adv.h * @@ -867,7 +869,7 @@ // On a 300mm bed a 5% grade would give a misalignment of ~1.5cm #define G34_MAX_GRADE 5 // (%) Maximum incline that G34 will handle - #define Z_STEPPER_ALIGN_ITERATIONS 5 // Number of iterations to apply during alignment + #define Z_STEPPER_ALIGN_ITERATIONS 3 // Number of iterations to apply during alignment #define Z_STEPPER_ALIGN_ACC 0.02 // Stop iterating early if the accuracy is better than this #define RESTORE_LEVELING_AFTER_G34 // Restore leveling after G34 is done? // After G34, re-home Z (G28 Z) or just calculate it from the last probe heights? diff --git a/config/examples/Geeetech/Me_ducer/Configuration.h b/config/examples/Geeetech/Me_ducer/Configuration.h index 78c2dc9160..9bdb2185ba 100644 --- a/config/examples/Geeetech/Me_ducer/Configuration.h +++ b/config/examples/Geeetech/Me_ducer/Configuration.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Geeetech/Me_ducer" + /** * Configuration.h * @@ -134,7 +136,7 @@ // Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_RAMPS_14_EFB +#define MOTHERBOARD BOARD_SANGUINOLOLU_12 #endif // Name displayed in the LCD "Ready" message and Info menu @@ -424,7 +426,7 @@ #define TEMP_SENSOR_5 0 #define TEMP_SENSOR_6 0 #define TEMP_SENSOR_7 0 -#define TEMP_SENSOR_BED 0 +#define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 #define TEMP_SENSOR_COOLER 0 @@ -513,13 +515,13 @@ #if ENABLED(PID_PARAMS_PER_HOTEND) // Specify between 1 and HOTENDS values per array. // If fewer than EXTRUDER values are provided, the last element will be repeated. - #define DEFAULT_Kp_LIST { 22.20, 22.20 } - #define DEFAULT_Ki_LIST { 1.08, 1.08 } - #define DEFAULT_Kd_LIST { 114.00, 114.00 } + #define DEFAULT_Kp_LIST { 19.86, 19.86 } + #define DEFAULT_Ki_LIST { 1.00, 1.00 } + #define DEFAULT_Kd_LIST { 98.93, 98.93 } #else - #define DEFAULT_Kp 22.20 - #define DEFAULT_Ki 1.08 - #define DEFAULT_Kd 114.00 + #define DEFAULT_Kp 19.86 + #define DEFAULT_Ki 1.00 + #define DEFAULT_Kd 98.93 #endif #endif // PIDTEMP @@ -685,10 +687,10 @@ // extra connectors. Leave undefined any used for non-endstop and non-probe purposes. #define USE_XMIN_PLUG #define USE_YMIN_PLUG -#define USE_ZMIN_PLUG +//#define USE_ZMIN_PLUG //#define USE_XMAX_PLUG //#define USE_YMAX_PLUG -//#define USE_ZMAX_PLUG +#define USE_ZMAX_PLUG // Enable pullup for all endstops to prevent a floating state #define ENDSTOPPULLUPS @@ -752,7 +754,7 @@ //#define Z3_DRIVER_TYPE A4988 //#define Z4_DRIVER_TYPE A4988 #define E0_DRIVER_TYPE A4988 -//#define E1_DRIVER_TYPE A4988 +#define E1_DRIVER_TYPE A4988 //#define E2_DRIVER_TYPE A4988 //#define E3_DRIVER_TYPE A4988 //#define E4_DRIVER_TYPE A4988 @@ -776,7 +778,7 @@ * * :[2,3,4,5,6,7] */ -//#define ENDSTOP_NOISE_THRESHOLD 2 +#define ENDSTOP_NOISE_THRESHOLD 2 // Check for stuck or disconnected endstops during homing moves. //#define DETECT_BROKEN_ENDSTOP @@ -799,14 +801,14 @@ * following movement settings. If fewer factors are given than the * total number of extruders, the last value applies to the rest. */ -//#define DISTINCT_E_FACTORS +#define DISTINCT_E_FACTORS /** * Default Axis Steps Per Unit (steps/mm) * Override with M92 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 500 } +#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 2560, 95 } /** * Default Max Feed Rate (mm/s) @@ -890,7 +892,7 @@ * * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained */ -//#define S_CURVE_ACCELERATION +#define S_CURVE_ACCELERATION //=========================================================================== //============================= Z Probe Options ============================= @@ -940,7 +942,7 @@ * Use G29 repeatedly, adjusting the Z height at each point with movement commands * or (with LCD_BED_LEVELING) the LCD controller. */ -//#define PROBE_MANUALLY +#define PROBE_MANUALLY /** * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. @@ -1055,14 +1057,14 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +#define NOZZLE_TO_PROBE_OFFSET { -15, -5, 0 } // Most probes should stay away from the edges of the bed, but // with NOZZLE_AS_PROBE this can be negative for a wider probing area. -#define PROBING_MARGIN 10 +#define PROBING_MARGIN 0 // X and Y axis travel speed (mm/min) between probes -#define XY_PROBE_FEEDRATE (133*60) +#define XY_PROBE_FEEDRATE (50*60) // Feedrate (mm/min) for the first approach when double-probing (MULTIPLE_PROBING == 2) #define Z_PROBE_FEEDRATE_FAST (4*60) @@ -1190,21 +1192,21 @@ // @section machine // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR false -#define INVERT_Y_DIR true +#define INVERT_X_DIR true +#define INVERT_Y_DIR false #define INVERT_Z_DIR false // @section extruder // For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR false -#define INVERT_E1_DIR false -#define INVERT_E2_DIR false -#define INVERT_E3_DIR false -#define INVERT_E4_DIR false -#define INVERT_E5_DIR false -#define INVERT_E6_DIR false -#define INVERT_E7_DIR false +#define INVERT_E0_DIR true +#define INVERT_E1_DIR true +#define INVERT_E2_DIR true +#define INVERT_E3_DIR true +#define INVERT_E4_DIR true +#define INVERT_E5_DIR true +#define INVERT_E6_DIR true +#define INVERT_E7_DIR true // @section homing @@ -1218,7 +1220,7 @@ */ //#define Z_IDLE_HEIGHT Z_HOME_POS -//#define Z_HOMING_HEIGHT 4 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ... +#define Z_HOMING_HEIGHT 4 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ... // Be sure to have this much clearance over your Z_MAX_POS to prevent grinding. //#define Z_AFTER_HOMING 10 // (mm) Height to move to after homing Z @@ -1227,13 +1229,13 @@ // :[-1,1] #define X_HOME_DIR -1 #define Y_HOME_DIR -1 -#define Z_HOME_DIR -1 +#define Z_HOME_DIR 1 // @section machine // The size of the printable area #define X_BED_SIZE 200 -#define Y_BED_SIZE 200 +#define Y_BED_SIZE 150 // Travel limits (mm) after homing, corresponding to endstop positions. #define X_MIN_POS 0 @@ -1241,7 +1243,7 @@ #define Z_MIN_POS 0 #define X_MAX_POS X_BED_SIZE #define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 200 +#define Z_MAX_POS 150 /** * Software Endstops @@ -1387,7 +1389,7 @@ */ //#define AUTO_BED_LEVELING_3POINT //#define AUTO_BED_LEVELING_LINEAR -//#define AUTO_BED_LEVELING_BILINEAR +#define AUTO_BED_LEVELING_BILINEAR //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING @@ -1396,7 +1398,7 @@ * these options to restore the prior leveling state or to always enable * leveling immediately after G28. */ -//#define RESTORE_LEVELING_AFTER_G28 +#define RESTORE_LEVELING_AFTER_G28 //#define ENABLE_LEVELING_AFTER_G28 /** @@ -1518,22 +1520,22 @@ * Add a bed leveling sub-menu for ABL or MBL. * Include a guided procedure if manual probing is enabled. */ -//#define LCD_BED_LEVELING +#define LCD_BED_LEVELING #if ENABLED(LCD_BED_LEVELING) #define MESH_EDIT_Z_STEP 0.025 // (mm) Step size while manually probing Z axis. #define LCD_PROBE_Z_RANGE 4 // (mm) Z Range centered on Z_MIN_POS for LCD Z adjustment - //#define MESH_EDIT_MENU // Add a menu to edit mesh points + #define MESH_EDIT_MENU // Add a menu to edit mesh points #endif // Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS +#define LEVEL_BED_CORNERS #if ENABLED(LEVEL_BED_CORNERS) #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner + #define LEVEL_CENTER_TOO // Move to the center after the last corner //#define LEVEL_CORNERS_USE_PROBE #if ENABLED(LEVEL_CORNERS_USE_PROBE) #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 @@ -1587,7 +1589,7 @@ // - Move the Z probe (or nozzle) to a defined XY point before Z Homing. // - Prevent Z homing when the Z probe is outside bed area. // -//#define Z_SAFE_HOMING +#define Z_SAFE_HOMING #if ENABLED(Z_SAFE_HOMING) #define Z_SAFE_HOMING_X_POINT X_CENTER // X point for Z homing @@ -1672,12 +1674,12 @@ * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) */ -//#define EEPROM_SETTINGS // Persistent storage with M500 and M501 +#define EEPROM_SETTINGS // Persistent storage with M500 and M501 //#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. #define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load #if ENABLED(EEPROM_SETTINGS) - //#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. + #define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. #endif // @@ -1936,7 +1938,7 @@ * SD Card support is disabled by default. If your controller has an SD slot, * you must uncomment the following option or it won't work. */ -//#define SDSUPPORT +#define SDSUPPORT /** * SD CARD: ENABLE CRC @@ -2006,7 +2008,7 @@ // // Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. // -//#define INDIVIDUAL_AXIS_HOMING_MENU +#define INDIVIDUAL_AXIS_HOMING_MENU // // SPEAKER/BUZZER @@ -2014,7 +2016,7 @@ // If you have a speaker that can produce tones, enable it here. // By default Marlin assumes you have a buzzer with a fixed frequency. // -//#define SPEAKER +#define SPEAKER // // The duration and frequency for the UI feedback sound. @@ -2023,8 +2025,8 @@ // Note: Test audio output with the G-Code: // M300 S P // -//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 -//#define LCD_FEEDBACK_FREQUENCY_HZ 5000 +#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 +#define LCD_FEEDBACK_FREQUENCY_HZ 5000 //============================================================================= //======================== LCD / Controller Selection ========================= @@ -2061,7 +2063,7 @@ // // ULTIPANEL as seen on Thingiverse. // -//#define ULTIPANEL +#define ULTIPANEL // // PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3) @@ -2618,7 +2620,7 @@ // Use software PWM to drive the fan, as for the heaters. This uses a very low frequency // which is not as annoying as with the hardware PWM. On the other hand, if this frequency // is too low, you should also increment SOFT_PWM_SCALE. -//#define FAN_SOFT_PWM +#define FAN_SOFT_PWM // Incrementing this by 1 will double the software PWM frequency, // affecting heaters, and the fan if FAN_SOFT_PWM is enabled. diff --git a/config/examples/Geeetech/Me_ducer/Configuration_adv.h b/config/examples/Geeetech/Me_ducer/Configuration_adv.h index 5335fa012a..fa821e48bf 100644 --- a/config/examples/Geeetech/Me_ducer/Configuration_adv.h +++ b/config/examples/Geeetech/Me_ducer/Configuration_adv.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Geeetech/Me_ducer" + /** * Configuration_adv.h * @@ -867,7 +869,7 @@ // On a 300mm bed a 5% grade would give a misalignment of ~1.5cm #define G34_MAX_GRADE 5 // (%) Maximum incline that G34 will handle - #define Z_STEPPER_ALIGN_ITERATIONS 5 // Number of iterations to apply during alignment + #define Z_STEPPER_ALIGN_ITERATIONS 3 // Number of iterations to apply during alignment #define Z_STEPPER_ALIGN_ACC 0.02 // Stop iterating early if the accuracy is better than this #define RESTORE_LEVELING_AFTER_G34 // Restore leveling after G34 is done? // After G34, re-home Z (G28 Z) or just calculate it from the last probe heights? @@ -1982,7 +1984,7 @@ // // G2/G3 Arc Support // -#define ARC_SUPPORT // Disable this feature to save ~3226 bytes +//#define ARC_SUPPORT // Disable this feature to save ~3226 bytes #if ENABLED(ARC_SUPPORT) #define MM_PER_ARC_SEGMENT 1 // (mm) Length (or minimum length) of each arc segment //#define ARC_SEGMENTS_PER_R 1 // Max segment length, MM_PER = Min diff --git a/config/examples/Geeetech/PI3A PRO/Configuration.h b/config/examples/Geeetech/PI3A PRO/Configuration.h index 78c2dc9160..724a6be7a1 100644 --- a/config/examples/Geeetech/PI3A PRO/Configuration.h +++ b/config/examples/Geeetech/PI3A PRO/Configuration.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Geeetech/PI3A PRO" + /** * Configuration.h * @@ -69,7 +71,7 @@ // @section info // Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes. +#define STRING_CONFIG_H_AUTHOR "(default config)" // Who made the changes. //#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) /** @@ -134,7 +136,7 @@ // Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_RAMPS_14_EFB + #define MOTHERBOARD BOARD_GT2560_REV_A_PLUS #endif // Name displayed in the LCD "Ready" message and Info menu @@ -424,7 +426,7 @@ #define TEMP_SENSOR_5 0 #define TEMP_SENSOR_6 0 #define TEMP_SENSOR_7 0 -#define TEMP_SENSOR_BED 0 +#define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 #define TEMP_SENSOR_COOLER 0 @@ -480,7 +482,7 @@ #define HEATER_5_MAXTEMP 275 #define HEATER_6_MAXTEMP 275 #define HEATER_7_MAXTEMP 275 -#define BED_MAXTEMP 150 +#define BED_MAXTEMP 125 #define CHAMBER_MAXTEMP 60 /** @@ -517,9 +519,15 @@ #define DEFAULT_Ki_LIST { 1.08, 1.08 } #define DEFAULT_Kd_LIST { 114.00, 114.00 } #else + // Geeetech MK8 Extruder #define DEFAULT_Kp 22.20 #define DEFAULT_Ki 1.08 #define DEFAULT_Kd 114.00 + + // CTC MK8 Extruder + //#define DEFAULT_Kp 19.86 + //#define DEFAULT_Ki 1.00 + //#define DEFAULT_Kd 98.83 #endif #endif // PIDTEMP @@ -556,8 +564,7 @@ //#define MIN_BED_POWER 0 //#define PID_BED_DEBUG // Sends debug data to the serial port. - // 120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - // from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) + // 12v (120 watt?) MK2a PCB Heatbed into 4mm borosilicate (Geeetech Průša i3 Pro, Pro/B/C/X) #define DEFAULT_bedKp 10.00 #define DEFAULT_bedKi .023 #define DEFAULT_bedKd 305.4 @@ -627,14 +634,14 @@ * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** */ #define PREVENT_COLD_EXTRUSION -#define EXTRUDE_MINTEMP 170 +#define EXTRUDE_MINTEMP 100 /** * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. * Note: For Bowden Extruders make this large enough to allow load/unload. */ #define PREVENT_LENGTHY_EXTRUDE -#define EXTRUDE_MAXLENGTH 200 +#define EXTRUDE_MAXLENGTH 1000 //=========================================================================== //======================== Thermal Runaway Protection ======================= @@ -806,14 +813,19 @@ * Override with M92 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 500 } +#define PRO_B_WITH_LEADSCREW +#if ENABLED(PRO_A_WITH_LEADSCREW) // M8 leadscrew version + #define DEFAULT_AXIS_STEPS_PER_UNIT { 78.74, 78.74, 400, 105 } +#else // M8 threaded rod version + #define DEFAULT_AXIS_STEPS_PER_UNIT { 78.74, 78.74, 2560, 105 } +#endif /** * Default Max Feed Rate (mm/s) * Override with M203 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 } +#define DEFAULT_MAX_FEEDRATE { 400, 400, 2, 45 } //#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 #if ENABLED(LIMITED_MAX_FR_EDITING) @@ -826,7 +838,7 @@ * Override with M201 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 } +#define DEFAULT_MAX_ACCELERATION { 5000, 5000, 75, 5000 } //#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 #if ENABLED(LIMITED_MAX_ACCEL_EDITING) @@ -841,8 +853,8 @@ * M204 R Retract Acceleration * M204 T Travel Acceleration */ -#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts +#define DEFAULT_ACCELERATION 1000 // X, Y, Z and E acceleration for printing moves +#define DEFAULT_RETRACT_ACCELERATION 2000 // E acceleration for retracts #define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves /** @@ -877,7 +889,7 @@ * https://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html */ #if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.013 // (mm) Distance from real junction edge + #define JUNCTION_DEVIATION_MM 0.04 // (mm) Distance from real junction edge #define JD_HANDLE_SMALL_SEGMENTS // Use curvature estimation instead of just the junction angle // for small segments (< 1mm) with large junction angles (> 135°). #endif @@ -906,7 +918,7 @@ * The probe replaces the Z-MIN endstop and is used for Z homing. * (Automatically enables USE_PROBE_FOR_Z_HOMING.) */ -#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN +//#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN // Force the use of the probe for Z-axis homing //#define USE_PROBE_FOR_Z_HOMING @@ -940,7 +952,7 @@ * Use G29 repeatedly, adjusting the Z height at each point with movement commands * or (with LCD_BED_LEVELING) the LCD controller. */ -//#define PROBE_MANUALLY +#define PROBE_MANUALLY /** * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. @@ -1065,7 +1077,7 @@ #define XY_PROBE_FEEDRATE (133*60) // Feedrate (mm/min) for the first approach when double-probing (MULTIPLE_PROBING == 2) -#define Z_PROBE_FEEDRATE_FAST (4*60) +#define Z_PROBE_FEEDRATE_FAST (20*60) // Feedrate (mm/min) for the "accurate" probe of each point #define Z_PROBE_FEEDRATE_SLOW (Z_PROBE_FEEDRATE_FAST / 2) @@ -1190,21 +1202,21 @@ // @section machine // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR false +#define INVERT_X_DIR true #define INVERT_Y_DIR true #define INVERT_Z_DIR false // @section extruder // For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR false -#define INVERT_E1_DIR false -#define INVERT_E2_DIR false -#define INVERT_E3_DIR false -#define INVERT_E4_DIR false -#define INVERT_E5_DIR false -#define INVERT_E6_DIR false -#define INVERT_E7_DIR false +#define INVERT_E0_DIR true +#define INVERT_E1_DIR true +#define INVERT_E2_DIR true +#define INVERT_E3_DIR true +#define INVERT_E4_DIR true +#define INVERT_E5_DIR true +#define INVERT_E6_DIR true +#define INVERT_E7_DIR true // @section homing @@ -1232,15 +1244,15 @@ // @section machine // The size of the printable area -#define X_BED_SIZE 200 -#define Y_BED_SIZE 200 +#define X_BED_SIZE 220 +#define Y_BED_SIZE 220 // Travel limits (mm) after homing, corresponding to endstop positions. #define X_MIN_POS 0 #define Y_MIN_POS 0 #define Z_MIN_POS 0 -#define X_MAX_POS X_BED_SIZE -#define Y_MAX_POS Y_BED_SIZE +#define X_MAX_POS (-X_MIN_POS+X_BED_SIZE) +#define Y_MAX_POS (-Y_MIN_POS+Y_BED_SIZE) #define Z_MAX_POS 200 /** @@ -1290,7 +1302,7 @@ #define FIL_RUNOUT_ENABLED_DEFAULT true // Enable the sensor on startup. Override with M412 followed by M500. #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. - #define FIL_RUNOUT_STATE LOW // Pin state indicating that filament is NOT present. + #define FIL_RUNOUT_STATE HIGH // Pin state indicating that filament is NOT present. #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. //#define WATCH_ALL_RUNOUT_SENSORS // Execute runout script on any triggering sensor, not only for the active extruder. @@ -1388,7 +1400,7 @@ //#define AUTO_BED_LEVELING_3POINT //#define AUTO_BED_LEVELING_LINEAR //#define AUTO_BED_LEVELING_BILINEAR -//#define AUTO_BED_LEVELING_UBL +#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING /** @@ -1396,7 +1408,7 @@ * these options to restore the prior leveling state or to always enable * leveling immediately after G28. */ -//#define RESTORE_LEVELING_AFTER_G28 +#define RESTORE_LEVELING_AFTER_G28 //#define ENABLE_LEVELING_AFTER_G28 /** @@ -1454,7 +1466,7 @@ #if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR) // Set the number of grid points per dimension. - #define GRID_MAX_POINTS_X 3 + #define GRID_MAX_POINTS_X 4 #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X // Probe along the Y axis, advancing X after each column @@ -1464,7 +1476,7 @@ // Beyond the probed grid, continue the implied tilt? // Default is to maintain the height of the nearest edge. - //#define EXTRAPOLATE_BEYOND_GRID + #define EXTRAPOLATE_BEYOND_GRID // // Experimental Subdivision of the grid by Catmull-Rom method. @@ -1486,8 +1498,8 @@ //#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh - #define MESH_INSET 1 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. + #define MESH_INSET 0 // Set Mesh bounds as an inset region of the bed + #define GRID_MAX_POINTS_X 5 // Don't use more than 15 points per axis, implementation limited. #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X //#define UBL_HILBERT_CURVE // Use Hilbert distribution for less travel when probing multiple points @@ -1495,7 +1507,7 @@ #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 - //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used + #define UBL_Z_RAISE_WHEN_OFF_MESH 0 // When the nozzle is off the mesh, this value is used // as the Z-Height correction value. //#define UBL_MESH_WIZARD // Run several commands in a row to get a complete mesh @@ -1518,7 +1530,7 @@ * Add a bed leveling sub-menu for ABL or MBL. * Include a guided procedure if manual probing is enabled. */ -//#define LCD_BED_LEVELING +#define LCD_BED_LEVELING #if ENABLED(LCD_BED_LEVELING) #define MESH_EDIT_Z_STEP 0.025 // (mm) Step size while manually probing Z axis. @@ -1527,13 +1539,13 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS +#define LEVEL_BED_CORNERS #if ENABLED(LEVEL_BED_CORNERS) #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner + #define LEVEL_CENTER_TOO // Move to the center after the last corner //#define LEVEL_CORNERS_USE_PROBE #if ENABLED(LEVEL_CORNERS_USE_PROBE) #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 @@ -1587,7 +1599,7 @@ // - Move the Z probe (or nozzle) to a defined XY point before Z Homing. // - Prevent Z homing when the Z probe is outside bed area. // -//#define Z_SAFE_HOMING +#define Z_SAFE_HOMING #if ENABLED(Z_SAFE_HOMING) #define Z_SAFE_HOMING_X_POINT X_CENTER // X point for Z homing @@ -1595,7 +1607,7 @@ #endif // Homing speeds (mm/min) -#define HOMING_FEEDRATE_MM_M { (50*60), (50*60), (4*60) } +#define HOMING_FEEDRATE_MM_M { (40*60), (40*60), (4*60) } // Validate that endstops are triggered on homing moves #define VALIDATE_HOMING_ENDSTOPS @@ -1635,12 +1647,12 @@ #if ENABLED(SKEW_CORRECTION) // Input all length measurements here: #define XY_DIAG_AC 282.8427124746 - #define XY_DIAG_BD 282.8427124746 + #define XY_DIAG_BD 281.8196945719 #define XY_SIDE_AD 200 // Or, set the default skew factors directly here // to override the above measurements: - #define XY_SKEW_FACTOR 0.0 + //#define XY_SKEW_FACTOR 0.0 //#define SKEW_CORRECTION_FOR_Z #if ENABLED(SKEW_CORRECTION_FOR_Z) @@ -1654,7 +1666,7 @@ #endif // Enable this option for M852 to set skew at runtime - //#define SKEW_CORRECTION_GCODE + #define SKEW_CORRECTION_GCODE #endif //============================================================================= @@ -1672,12 +1684,12 @@ * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) */ -//#define EEPROM_SETTINGS // Persistent storage with M500 and M501 -//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! +#define EEPROM_SETTINGS // Persistent storage with M500 and M501 +//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. #define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load #if ENABLED(EEPROM_SETTINGS) - //#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. + #define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. #endif // @@ -1706,16 +1718,16 @@ // Preheat Constants - Up to 5 are supported without changes // #define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 180 -#define PREHEAT_1_TEMP_BED 70 +#define PREHEAT_1_TEMP_HOTEND 200 +#define PREHEAT_1_TEMP_BED 60 #define PREHEAT_1_TEMP_CHAMBER 35 -#define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 +#define PREHEAT_1_FAN_SPEED 170 // Value from 0 to 255 #define PREHEAT_2_LABEL "ABS" #define PREHEAT_2_TEMP_HOTEND 240 #define PREHEAT_2_TEMP_BED 110 #define PREHEAT_2_TEMP_CHAMBER 35 -#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 +#define PREHEAT_2_FAN_SPEED 170 // Value from 0 to 255 /** * Nozzle Park @@ -1728,7 +1740,7 @@ * P1 Raise the nozzle always to Z-park height. * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. */ -//#define NOZZLE_PARK_FEATURE +#define NOZZLE_PARK_FEATURE #if ENABLED(NOZZLE_PARK_FEATURE) // Specify a park position as { X, Y, Z_raise } @@ -1845,7 +1857,7 @@ * * View the current statistics with M78. */ -//#define PRINTCOUNTER +#define PRINTCOUNTER #if ENABLED(PRINTCOUNTER) #define PRINTCOUNTER_SAVE_INTERVAL 60 // (minutes) EEPROM save interval during print #endif @@ -1936,7 +1948,7 @@ * SD Card support is disabled by default. If your controller has an SD slot, * you must uncomment the following option or it won't work. */ -//#define SDSUPPORT +#define SDSUPPORT /** * SD CARD: ENABLE CRC @@ -2006,7 +2018,7 @@ // // Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. // -//#define INDIVIDUAL_AXIS_HOMING_MENU +#define INDIVIDUAL_AXIS_HOMING_MENU // // SPEAKER/BUZZER @@ -2014,7 +2026,7 @@ // If you have a speaker that can produce tones, enable it here. // By default Marlin assumes you have a buzzer with a fixed frequency. // -//#define SPEAKER +#define SPEAKER // // The duration and frequency for the UI feedback sound. @@ -2023,8 +2035,8 @@ // Note: Test audio output with the G-Code: // M300 S P // -//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 -//#define LCD_FEEDBACK_FREQUENCY_HZ 5000 +#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 +#define LCD_FEEDBACK_FREQUENCY_HZ 5000 //============================================================================= //======================== LCD / Controller Selection ========================= @@ -2037,7 +2049,7 @@ // // Note: Usually sold with a white PCB. // -//#define REPRAP_DISCOUNT_SMART_CONTROLLER +#define REPRAP_DISCOUNT_SMART_CONTROLLER // // GT2560 (YHCB2004) LCD Display @@ -2618,7 +2630,7 @@ // Use software PWM to drive the fan, as for the heaters. This uses a very low frequency // which is not as annoying as with the hardware PWM. On the other hand, if this frequency // is too low, you should also increment SOFT_PWM_SCALE. -//#define FAN_SOFT_PWM +#define FAN_SOFT_PWM // Incrementing this by 1 will double the software PWM frequency, // affecting heaters, and the fan if FAN_SOFT_PWM is enabled. diff --git a/config/examples/Geeetech/PI3A PRO/Configuration_adv.h b/config/examples/Geeetech/PI3A PRO/Configuration_adv.h index 5335fa012a..362a974b20 100644 --- a/config/examples/Geeetech/PI3A PRO/Configuration_adv.h +++ b/config/examples/Geeetech/PI3A PRO/Configuration_adv.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Geeetech/PI3A PRO" + /** * Configuration_adv.h * @@ -377,7 +379,7 @@ * Enable Autotemp Mode with M104/M109 F S B. * Disable by sending M104/M109 with no F parameter (or F0 with AUTOTEMP_PROPORTIONAL). */ -#define AUTOTEMP +//#define AUTOTEMP #if ENABLED(AUTOTEMP) #define AUTOTEMP_OLDWEIGHT 0.98 // Turn on AUTOTEMP on M104/M109 by default using proportions set here @@ -867,7 +869,7 @@ // On a 300mm bed a 5% grade would give a misalignment of ~1.5cm #define G34_MAX_GRADE 5 // (%) Maximum incline that G34 will handle - #define Z_STEPPER_ALIGN_ITERATIONS 5 // Number of iterations to apply during alignment + #define Z_STEPPER_ALIGN_ITERATIONS 3 // Number of iterations to apply during alignment #define Z_STEPPER_ALIGN_ACC 0.02 // Stop iterating early if the accuracy is better than this #define RESTORE_LEVELING_AFTER_G34 // Restore leveling after G34 is done? // After G34, re-home Z (G28 Z) or just calculate it from the last probe heights? @@ -1229,7 +1231,7 @@ #endif // Scroll a longer status message into view - //#define STATUS_MESSAGE_SCROLLING + #define STATUS_MESSAGE_SCROLLING // On the Info Screen, display XY with one decimal place when possible //#define LCD_DECIMAL_SMALL_XY @@ -1301,7 +1303,7 @@ //#define BROWSE_MEDIA_ON_INSERT // Open the file browser when media is inserted - #define EVENT_GCODE_SD_ABORT "G28XY" // G-code to run on SD Abort Print (e.g., "G28XY" or "G27") + #define EVENT_GCODE_SD_ABORT "G27" // G-code to run on SD Abort Print (e.g., "G28XY" or "G27") #if ENABLED(PRINTER_EVENT_LEDS) #define PE_LEDS_COMPLETED_TIME (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination @@ -1381,10 +1383,10 @@ //#define UTF_FILENAME_SUPPORT // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT + #define LONG_FILENAME_HOST_SUPPORT // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES + #define SCROLL_LONG_FILENAMES // Leave the heaters on after Stop Print (not recommended!) //#define SD_ABORT_NO_COOLDOWN @@ -1790,7 +1792,7 @@ * * Warning: Does not respect endstops! */ -//#define BABYSTEPPING +#define BABYSTEPPING #if ENABLED(BABYSTEPPING) //#define INTEGRATED_BABYSTEPPING // EXPERIMENTAL integration of babystepping into the Stepper ISR //#define BABYSTEP_WITHOUT_HOMING @@ -1837,10 +1839,10 @@ * * See https://marlinfw.org/docs/features/lin_advance.html for full instructions. */ -//#define LIN_ADVANCE +#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) //#define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants - #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed + #define LIN_ADVANCE_K 0 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // If enabled, this will generate debug information output over USB. //#define EXPERIMENTAL_SCURVE // Enable this option to permit S-Curve Acceleration #endif @@ -2141,7 +2143,7 @@ * Currently handles M108, M112, M410, M876 * NOTE: Not yet implemented for all platforms. */ -//#define EMERGENCY_PARSER +#define EMERGENCY_PARSER /** * Realtime Reporting (requires EMERGENCY_PARSER) @@ -2170,7 +2172,7 @@ //#define NO_TIMEOUTS 1000 // Milliseconds // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. -//#define ADVANCED_OK +#define ADVANCED_OK // Printrun may have trouble receiving long strings all at once. // This option inserts short delays between lines of serial output. @@ -2311,7 +2313,7 @@ * * Enable PARK_HEAD_ON_PAUSE to add the G-code M125 Pause and Park. */ -//#define ADVANCED_PAUSE_FEATURE +#define ADVANCED_PAUSE_FEATURE #if ENABLED(ADVANCED_PAUSE_FEATURE) #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. @@ -2349,7 +2351,7 @@ #define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed. #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change. - //#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. + #define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. //#define HOME_BEFORE_FILAMENT_CHANGE // If needed, home before parking for filament change //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. diff --git a/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h b/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h index 78c2dc9160..76ba7135c3 100644 --- a/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h +++ b/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Geeetech/Prusa i3 Pro B/bltouch" + /** * Configuration.h * @@ -69,7 +71,7 @@ // @section info // Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes. +#define STRING_CONFIG_H_AUTHOR "(1138-4EB, Geeetech Průša i3 Pro B BLTouch config)" // Who made the changes. //#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) /** @@ -134,11 +136,11 @@ // Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_RAMPS_14_EFB + #define MOTHERBOARD BOARD_GT2560_REV_A_PLUS #endif // Name displayed in the LCD "Ready" message and Info menu -//#define CUSTOM_MACHINE_NAME "3D Printer" +#define CUSTOM_MACHINE_NAME "i3 Pro B" // Printer's unique ID, used by some programs to differentiate between machines. // Choose your own or use a service like https://www.uuidgenerator.net/version4 @@ -424,7 +426,7 @@ #define TEMP_SENSOR_5 0 #define TEMP_SENSOR_6 0 #define TEMP_SENSOR_7 0 -#define TEMP_SENSOR_BED 0 +#define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 #define TEMP_SENSOR_COOLER 0 @@ -480,7 +482,7 @@ #define HEATER_5_MAXTEMP 275 #define HEATER_6_MAXTEMP 275 #define HEATER_7_MAXTEMP 275 -#define BED_MAXTEMP 150 +#define BED_MAXTEMP 125 #define CHAMBER_MAXTEMP 60 /** @@ -513,13 +515,19 @@ #if ENABLED(PID_PARAMS_PER_HOTEND) // Specify between 1 and HOTENDS values per array. // If fewer than EXTRUDER values are provided, the last element will be repeated. - #define DEFAULT_Kp_LIST { 22.20, 22.20 } - #define DEFAULT_Ki_LIST { 1.08, 1.08 } - #define DEFAULT_Kd_LIST { 114.00, 114.00 } + #define DEFAULT_Kp_LIST { 12.33, 12.33 } + #define DEFAULT_Ki_LIST { 0.51, 0.51 } + #define DEFAULT_Kd_LIST { 74.50, 74.50 } #else - #define DEFAULT_Kp 22.20 - #define DEFAULT_Ki 1.08 - #define DEFAULT_Kd 114.00 + // Geeetech MK8 Extruder + #define DEFAULT_Kp 12.33 + #define DEFAULT_Ki 0.51 + #define DEFAULT_Kd 74.50 + + // CTC MK8 Extruder + //#define DEFAULT_Kp 19.86 + //#define DEFAULT_Ki 1.00 + //#define DEFAULT_Kd 98.83 #endif #endif // PIDTEMP @@ -556,11 +564,10 @@ //#define MIN_BED_POWER 0 //#define PID_BED_DEBUG // Sends debug data to the serial port. - // 120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - // from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) - #define DEFAULT_bedKp 10.00 - #define DEFAULT_bedKi .023 - #define DEFAULT_bedKd 305.4 + // 12v (120 watt?) MK2a PCB Heatbed into 4mm borosilicate (Geeetech Průša i3 Pro, Pro/B/C/X) + #define DEFAULT_bedKp 234.88 + #define DEFAULT_bedKi 42.79 + #define DEFAULT_bedKd 322.28 // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. #endif // PIDTEMPBED @@ -688,7 +695,7 @@ #define USE_ZMIN_PLUG //#define USE_XMAX_PLUG //#define USE_YMAX_PLUG -//#define USE_ZMAX_PLUG +#define USE_ZMAX_PLUG // Enable pullup for all endstops to prevent a floating state #define ENDSTOPPULLUPS @@ -806,14 +813,19 @@ * Override with M92 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 500 } +#define PRO_B_WITH_LEADSCREW +#if ENABLED(PRO_B_WITH_LEADSCREW) // M8 leadscrew version + #define DEFAULT_AXIS_STEPS_PER_UNIT { 78.74, 78.74, 400, 105 } +#else // M8 threaded rod version + #define DEFAULT_AXIS_STEPS_PER_UNIT { 78.74, 78.74, 2560, 105 } +#endif /** * Default Max Feed Rate (mm/s) * Override with M203 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 } +#define DEFAULT_MAX_FEEDRATE { 400, 400, 2, 45 } //#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 #if ENABLED(LIMITED_MAX_FR_EDITING) @@ -826,7 +838,7 @@ * Override with M201 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 } +#define DEFAULT_MAX_ACCELERATION { 5000, 5000, 75, 5000 } //#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 #if ENABLED(LIMITED_MAX_ACCEL_EDITING) @@ -841,8 +853,8 @@ * M204 R Retract Acceleration * M204 T Travel Acceleration */ -#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts +#define DEFAULT_ACCELERATION 1000 // X, Y, Z and E acceleration for printing moves +#define DEFAULT_RETRACT_ACCELERATION 2000 // E acceleration for retracts #define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves /** @@ -877,7 +889,7 @@ * https://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html */ #if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.013 // (mm) Distance from real junction edge + #define JUNCTION_DEVIATION_MM 0.04 // (mm) Distance from real junction edge #define JD_HANDLE_SMALL_SEGMENTS // Use curvature estimation instead of just the junction angle // for small segments (< 1mm) with large junction angles (> 135°). #endif @@ -906,7 +918,7 @@ * The probe replaces the Z-MIN endstop and is used for Z homing. * (Automatically enables USE_PROBE_FOR_Z_HOMING.) */ -#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN +//#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN // Force the use of the probe for Z-axis homing //#define USE_PROBE_FOR_Z_HOMING @@ -927,6 +939,7 @@ * - normally-open switches to 5V and D32. */ //#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +#define Z_MIN_PROBE_PIN 32 /** * Probe Type @@ -963,7 +976,7 @@ /** * The BLTouch probe uses a Hall effect sensor and emulates a servo. */ -//#define BLTOUCH +#define BLTOUCH /** * Touch-MI Probe by hotends.fr @@ -1055,7 +1068,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +#define NOZZLE_TO_PROBE_OFFSET { 4, -44, -1.4 } // Most probes should stay away from the edges of the bed, but // with NOZZLE_AS_PROBE this can be negative for a wider probing area. @@ -1065,7 +1078,7 @@ #define XY_PROBE_FEEDRATE (133*60) // Feedrate (mm/min) for the first approach when double-probing (MULTIPLE_PROBING == 2) -#define Z_PROBE_FEEDRATE_FAST (4*60) +#define Z_PROBE_FEEDRATE_FAST (20*60) // Feedrate (mm/min) for the "accurate" probe of each point #define Z_PROBE_FEEDRATE_SLOW (Z_PROBE_FEEDRATE_FAST / 2) @@ -1106,7 +1119,7 @@ * A total of 2 does fast/slow probes with a weighted average. * A total of 3 or more adds more slow probes, taking the average. */ -//#define MULTIPLE_PROBING 2 +#define MULTIPLE_PROBING 3 //#define EXTRA_PROBING 1 /** @@ -1135,7 +1148,7 @@ #define Z_PROBE_OFFSET_RANGE_MAX 20 // Enable the M48 repeatability test to test probe accuracy -//#define Z_MIN_PROBE_REPEATABILITY_TEST +#define Z_MIN_PROBE_REPEATABILITY_TEST // Before deploy/stow pause for user confirmation //#define PAUSE_BEFORE_DEPLOY_STOW @@ -1150,14 +1163,14 @@ * These options are most useful for the BLTouch probe, but may also improve * readings with inductive probes and piezo sensors. */ -//#define PROBING_HEATERS_OFF // Turn heaters off when probing +#define PROBING_HEATERS_OFF // Turn heaters off when probing #if ENABLED(PROBING_HEATERS_OFF) //#define WAIT_FOR_BED_HEATER // Wait for bed to heat back up between probes (to improve accuracy) //#define WAIT_FOR_HOTEND // Wait for hotend to heat back up between probes (to improve accuracy & prevent cold extrude) #endif -//#define PROBING_FANS_OFF // Turn fans off when probing +#define PROBING_FANS_OFF // Turn fans off when probing //#define PROBING_STEPPERS_OFF // Turn steppers off (unless needed to hold position) when probing -//#define DELAY_BEFORE_PROBING 200 // (ms) To prevent vibrations from triggering piezo sensors +#define DELAY_BEFORE_PROBING 200 // (ms) To prevent vibrations from triggering piezo sensors // Require minimum nozzle and/or bed temperature for probing //#define PREHEAT_BEFORE_PROBING @@ -1190,21 +1203,21 @@ // @section machine // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR false +#define INVERT_X_DIR true #define INVERT_Y_DIR true #define INVERT_Z_DIR false // @section extruder // For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR false -#define INVERT_E1_DIR false -#define INVERT_E2_DIR false -#define INVERT_E3_DIR false -#define INVERT_E4_DIR false -#define INVERT_E5_DIR false -#define INVERT_E6_DIR false -#define INVERT_E7_DIR false +#define INVERT_E0_DIR true +#define INVERT_E1_DIR true +#define INVERT_E2_DIR true +#define INVERT_E3_DIR true +#define INVERT_E4_DIR true +#define INVERT_E5_DIR true +#define INVERT_E6_DIR true +#define INVERT_E7_DIR true // @section homing @@ -1236,11 +1249,11 @@ #define Y_BED_SIZE 200 // Travel limits (mm) after homing, corresponding to endstop positions. -#define X_MIN_POS 0 -#define Y_MIN_POS 0 +#define X_MIN_POS -12 +#define Y_MIN_POS -8 #define Z_MIN_POS 0 -#define X_MAX_POS X_BED_SIZE -#define Y_MAX_POS Y_BED_SIZE +#define X_MAX_POS (-X_MIN_POS+X_BED_SIZE) +#define Y_MAX_POS (-Y_MIN_POS+Y_BED_SIZE) #define Z_MAX_POS 200 /** @@ -1387,7 +1400,7 @@ */ //#define AUTO_BED_LEVELING_3POINT //#define AUTO_BED_LEVELING_LINEAR -//#define AUTO_BED_LEVELING_BILINEAR +#define AUTO_BED_LEVELING_BILINEAR //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING @@ -1454,7 +1467,7 @@ #if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR) // Set the number of grid points per dimension. - #define GRID_MAX_POINTS_X 3 + #define GRID_MAX_POINTS_X 4 #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X // Probe along the Y axis, advancing X after each column @@ -1464,7 +1477,7 @@ // Beyond the probed grid, continue the implied tilt? // Default is to maintain the height of the nearest edge. - //#define EXTRAPOLATE_BEYOND_GRID + #define EXTRAPOLATE_BEYOND_GRID // // Experimental Subdivision of the grid by Catmull-Rom method. @@ -1527,7 +1540,7 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS +#define LEVEL_BED_CORNERS #if ENABLED(LEVEL_BED_CORNERS) #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets @@ -1587,7 +1600,7 @@ // - Move the Z probe (or nozzle) to a defined XY point before Z Homing. // - Prevent Z homing when the Z probe is outside bed area. // -//#define Z_SAFE_HOMING +#define Z_SAFE_HOMING #if ENABLED(Z_SAFE_HOMING) #define Z_SAFE_HOMING_X_POINT X_CENTER // X point for Z homing @@ -1630,17 +1643,17 @@ * +-------------->X +-------------->X +-------------->Y * XY_SKEW_FACTOR XZ_SKEW_FACTOR YZ_SKEW_FACTOR */ -//#define SKEW_CORRECTION +#define SKEW_CORRECTION #if ENABLED(SKEW_CORRECTION) // Input all length measurements here: #define XY_DIAG_AC 282.8427124746 - #define XY_DIAG_BD 282.8427124746 + #define XY_DIAG_BD 281.8196945719 #define XY_SIDE_AD 200 // Or, set the default skew factors directly here // to override the above measurements: - #define XY_SKEW_FACTOR 0.0 + //#define XY_SKEW_FACTOR 0.0 //#define SKEW_CORRECTION_FOR_Z #if ENABLED(SKEW_CORRECTION_FOR_Z) @@ -1654,7 +1667,7 @@ #endif // Enable this option for M852 to set skew at runtime - //#define SKEW_CORRECTION_GCODE + #define SKEW_CORRECTION_GCODE #endif //============================================================================= @@ -1672,8 +1685,8 @@ * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) */ -//#define EEPROM_SETTINGS // Persistent storage with M500 and M501 -//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! +#define EEPROM_SETTINGS // Persistent storage with M500 and M501 +#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. #define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load #if ENABLED(EEPROM_SETTINGS) @@ -1706,16 +1719,16 @@ // Preheat Constants - Up to 5 are supported without changes // #define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 180 -#define PREHEAT_1_TEMP_BED 70 +#define PREHEAT_1_TEMP_HOTEND 200 +#define PREHEAT_1_TEMP_BED 60 #define PREHEAT_1_TEMP_CHAMBER 35 -#define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 +#define PREHEAT_1_FAN_SPEED 170 // Value from 0 to 255 #define PREHEAT_2_LABEL "ABS" #define PREHEAT_2_TEMP_HOTEND 240 #define PREHEAT_2_TEMP_BED 110 #define PREHEAT_2_TEMP_CHAMBER 35 -#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 +#define PREHEAT_2_FAN_SPEED 170 // Value from 0 to 255 /** * Nozzle Park @@ -1845,7 +1858,7 @@ * * View the current statistics with M78. */ -//#define PRINTCOUNTER +#define PRINTCOUNTER #if ENABLED(PRINTCOUNTER) #define PRINTCOUNTER_SAVE_INTERVAL 60 // (minutes) EEPROM save interval during print #endif @@ -1936,14 +1949,14 @@ * SD Card support is disabled by default. If your controller has an SD slot, * you must uncomment the following option or it won't work. */ -//#define SDSUPPORT +#define SDSUPPORT /** * SD CARD: ENABLE CRC * * Use CRC checks and retries on the SD communication. */ -//#define SD_CHECK_AND_RETRY +#define SD_CHECK_AND_RETRY /** * LCD Menu Items @@ -2006,7 +2019,7 @@ // // Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. // -//#define INDIVIDUAL_AXIS_HOMING_MENU +#define INDIVIDUAL_AXIS_HOMING_MENU // // SPEAKER/BUZZER @@ -2014,7 +2027,7 @@ // If you have a speaker that can produce tones, enable it here. // By default Marlin assumes you have a buzzer with a fixed frequency. // -//#define SPEAKER +#define SPEAKER // // The duration and frequency for the UI feedback sound. @@ -2023,8 +2036,8 @@ // Note: Test audio output with the G-Code: // M300 S P // -//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 -//#define LCD_FEEDBACK_FREQUENCY_HZ 5000 +#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 +#define LCD_FEEDBACK_FREQUENCY_HZ 5000 //============================================================================= //======================== LCD / Controller Selection ========================= @@ -2037,7 +2050,7 @@ // // Note: Usually sold with a white PCB. // -//#define REPRAP_DISCOUNT_SMART_CONTROLLER +#define REPRAP_DISCOUNT_SMART_CONTROLLER // // GT2560 (YHCB2004) LCD Display diff --git a/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h b/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h index 78c2dc9160..1435b3986e 100644 --- a/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h +++ b/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Geeetech/Prusa i3 Pro B/noprobe" + /** * Configuration.h * @@ -69,7 +71,7 @@ // @section info // Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes. +#define STRING_CONFIG_H_AUTHOR "(1138-4EB, Geeetech Průša i3 Pro B config)" // Who made the changes. //#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) /** @@ -134,11 +136,11 @@ // Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_RAMPS_14_EFB + #define MOTHERBOARD BOARD_GT2560_REV_A_PLUS #endif // Name displayed in the LCD "Ready" message and Info menu -//#define CUSTOM_MACHINE_NAME "3D Printer" +#define CUSTOM_MACHINE_NAME "i3 Pro B" // Printer's unique ID, used by some programs to differentiate between machines. // Choose your own or use a service like https://www.uuidgenerator.net/version4 @@ -424,7 +426,7 @@ #define TEMP_SENSOR_5 0 #define TEMP_SENSOR_6 0 #define TEMP_SENSOR_7 0 -#define TEMP_SENSOR_BED 0 +#define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 #define TEMP_SENSOR_COOLER 0 @@ -480,7 +482,7 @@ #define HEATER_5_MAXTEMP 275 #define HEATER_6_MAXTEMP 275 #define HEATER_7_MAXTEMP 275 -#define BED_MAXTEMP 150 +#define BED_MAXTEMP 125 #define CHAMBER_MAXTEMP 60 /** @@ -513,13 +515,19 @@ #if ENABLED(PID_PARAMS_PER_HOTEND) // Specify between 1 and HOTENDS values per array. // If fewer than EXTRUDER values are provided, the last element will be repeated. - #define DEFAULT_Kp_LIST { 22.20, 22.20 } - #define DEFAULT_Ki_LIST { 1.08, 1.08 } - #define DEFAULT_Kd_LIST { 114.00, 114.00 } + #define DEFAULT_Kp_LIST { 12.33, 12.33 } + #define DEFAULT_Ki_LIST { 0.51, 0.51 } + #define DEFAULT_Kd_LIST { 74.50, 74.50 } #else - #define DEFAULT_Kp 22.20 - #define DEFAULT_Ki 1.08 - #define DEFAULT_Kd 114.00 + // Geeetech MK8 Extruder + #define DEFAULT_Kp 12.33 + #define DEFAULT_Ki 0.51 + #define DEFAULT_Kd 74.50 + + // CTC MK8 Extruder + //#define DEFAULT_Kp 19.86 + //#define DEFAULT_Ki 1.00 + //#define DEFAULT_Kd 98.83 #endif #endif // PIDTEMP @@ -556,11 +564,10 @@ //#define MIN_BED_POWER 0 //#define PID_BED_DEBUG // Sends debug data to the serial port. - // 120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - // from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) - #define DEFAULT_bedKp 10.00 - #define DEFAULT_bedKi .023 - #define DEFAULT_bedKd 305.4 + // 12v (120 watt?) MK2a PCB Heatbed into 4mm borosilicate (Geeetech Průša i3 Pro, Pro/B/C/X) + #define DEFAULT_bedKp 234.88 + #define DEFAULT_bedKi 42.79 + #define DEFAULT_bedKd 322.28 // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. #endif // PIDTEMPBED @@ -806,14 +813,19 @@ * Override with M92 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 500 } +#define PRO_B_WITH_LEADSCREW +#if ENABLED(PRO_B_WITH_LEADSCREW) // M8 leadscrew version + #define DEFAULT_AXIS_STEPS_PER_UNIT { 78.74, 78.74, 400, 105 } +#else // M8 threaded rod version + #define DEFAULT_AXIS_STEPS_PER_UNIT { 78.74, 78.74, 2560, 105 } +#endif /** * Default Max Feed Rate (mm/s) * Override with M203 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 } +#define DEFAULT_MAX_FEEDRATE { 400, 400, 2, 45 } //#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 #if ENABLED(LIMITED_MAX_FR_EDITING) @@ -826,7 +838,7 @@ * Override with M201 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 } +#define DEFAULT_MAX_ACCELERATION { 5000, 5000, 75, 5000 } //#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 #if ENABLED(LIMITED_MAX_ACCEL_EDITING) @@ -841,8 +853,8 @@ * M204 R Retract Acceleration * M204 T Travel Acceleration */ -#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts +#define DEFAULT_ACCELERATION 1000 // X, Y, Z and E acceleration for printing moves +#define DEFAULT_RETRACT_ACCELERATION 2000 // E acceleration for retracts #define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves /** @@ -877,7 +889,7 @@ * https://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html */ #if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.013 // (mm) Distance from real junction edge + #define JUNCTION_DEVIATION_MM 0.04 // (mm) Distance from real junction edge #define JD_HANDLE_SMALL_SEGMENTS // Use curvature estimation instead of just the junction angle // for small segments (< 1mm) with large junction angles (> 135°). #endif @@ -906,7 +918,7 @@ * The probe replaces the Z-MIN endstop and is used for Z homing. * (Automatically enables USE_PROBE_FOR_Z_HOMING.) */ -#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN +//#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN // Force the use of the probe for Z-axis homing //#define USE_PROBE_FOR_Z_HOMING @@ -940,7 +952,7 @@ * Use G29 repeatedly, adjusting the Z height at each point with movement commands * or (with LCD_BED_LEVELING) the LCD controller. */ -//#define PROBE_MANUALLY +#define PROBE_MANUALLY /** * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. @@ -1065,7 +1077,7 @@ #define XY_PROBE_FEEDRATE (133*60) // Feedrate (mm/min) for the first approach when double-probing (MULTIPLE_PROBING == 2) -#define Z_PROBE_FEEDRATE_FAST (4*60) +#define Z_PROBE_FEEDRATE_FAST (20*60) // Feedrate (mm/min) for the "accurate" probe of each point #define Z_PROBE_FEEDRATE_SLOW (Z_PROBE_FEEDRATE_FAST / 2) @@ -1190,21 +1202,21 @@ // @section machine // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR false +#define INVERT_X_DIR true #define INVERT_Y_DIR true #define INVERT_Z_DIR false // @section extruder // For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR false -#define INVERT_E1_DIR false -#define INVERT_E2_DIR false -#define INVERT_E3_DIR false -#define INVERT_E4_DIR false -#define INVERT_E5_DIR false -#define INVERT_E6_DIR false -#define INVERT_E7_DIR false +#define INVERT_E0_DIR true +#define INVERT_E1_DIR true +#define INVERT_E2_DIR true +#define INVERT_E3_DIR true +#define INVERT_E4_DIR true +#define INVERT_E5_DIR true +#define INVERT_E6_DIR true +#define INVERT_E7_DIR true // @section homing @@ -1236,11 +1248,11 @@ #define Y_BED_SIZE 200 // Travel limits (mm) after homing, corresponding to endstop positions. -#define X_MIN_POS 0 -#define Y_MIN_POS 0 +#define X_MIN_POS -12 +#define Y_MIN_POS -8 #define Z_MIN_POS 0 -#define X_MAX_POS X_BED_SIZE -#define Y_MAX_POS Y_BED_SIZE +#define X_MAX_POS (-X_MIN_POS+X_BED_SIZE) +#define Y_MAX_POS (-Y_MIN_POS+Y_BED_SIZE) #define Z_MAX_POS 200 /** @@ -1387,7 +1399,7 @@ */ //#define AUTO_BED_LEVELING_3POINT //#define AUTO_BED_LEVELING_LINEAR -//#define AUTO_BED_LEVELING_BILINEAR +#define AUTO_BED_LEVELING_BILINEAR //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING @@ -1454,7 +1466,7 @@ #if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR) // Set the number of grid points per dimension. - #define GRID_MAX_POINTS_X 3 + #define GRID_MAX_POINTS_X 4 #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X // Probe along the Y axis, advancing X after each column @@ -1464,7 +1476,7 @@ // Beyond the probed grid, continue the implied tilt? // Default is to maintain the height of the nearest edge. - //#define EXTRAPOLATE_BEYOND_GRID + #define EXTRAPOLATE_BEYOND_GRID // // Experimental Subdivision of the grid by Catmull-Rom method. @@ -1518,7 +1530,7 @@ * Add a bed leveling sub-menu for ABL or MBL. * Include a guided procedure if manual probing is enabled. */ -//#define LCD_BED_LEVELING +#define LCD_BED_LEVELING #if ENABLED(LCD_BED_LEVELING) #define MESH_EDIT_Z_STEP 0.025 // (mm) Step size while manually probing Z axis. @@ -1527,7 +1539,7 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS +#define LEVEL_BED_CORNERS #if ENABLED(LEVEL_BED_CORNERS) #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets @@ -1587,7 +1599,7 @@ // - Move the Z probe (or nozzle) to a defined XY point before Z Homing. // - Prevent Z homing when the Z probe is outside bed area. // -//#define Z_SAFE_HOMING +#define Z_SAFE_HOMING #if ENABLED(Z_SAFE_HOMING) #define Z_SAFE_HOMING_X_POINT X_CENTER // X point for Z homing @@ -1630,17 +1642,17 @@ * +-------------->X +-------------->X +-------------->Y * XY_SKEW_FACTOR XZ_SKEW_FACTOR YZ_SKEW_FACTOR */ -//#define SKEW_CORRECTION +#define SKEW_CORRECTION #if ENABLED(SKEW_CORRECTION) // Input all length measurements here: #define XY_DIAG_AC 282.8427124746 - #define XY_DIAG_BD 282.8427124746 + #define XY_DIAG_BD 281.8196945719 #define XY_SIDE_AD 200 // Or, set the default skew factors directly here // to override the above measurements: - #define XY_SKEW_FACTOR 0.0 + //#define XY_SKEW_FACTOR 0.0 //#define SKEW_CORRECTION_FOR_Z #if ENABLED(SKEW_CORRECTION_FOR_Z) @@ -1654,7 +1666,7 @@ #endif // Enable this option for M852 to set skew at runtime - //#define SKEW_CORRECTION_GCODE + #define SKEW_CORRECTION_GCODE #endif //============================================================================= @@ -1672,8 +1684,8 @@ * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) */ -//#define EEPROM_SETTINGS // Persistent storage with M500 and M501 -//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! +#define EEPROM_SETTINGS // Persistent storage with M500 and M501 +#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. #define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load #if ENABLED(EEPROM_SETTINGS) @@ -1706,16 +1718,16 @@ // Preheat Constants - Up to 5 are supported without changes // #define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 180 -#define PREHEAT_1_TEMP_BED 70 +#define PREHEAT_1_TEMP_HOTEND 200 +#define PREHEAT_1_TEMP_BED 60 #define PREHEAT_1_TEMP_CHAMBER 35 -#define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 +#define PREHEAT_1_FAN_SPEED 170 // Value from 0 to 255 #define PREHEAT_2_LABEL "ABS" #define PREHEAT_2_TEMP_HOTEND 240 #define PREHEAT_2_TEMP_BED 110 #define PREHEAT_2_TEMP_CHAMBER 35 -#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 +#define PREHEAT_2_FAN_SPEED 170 // Value from 0 to 255 /** * Nozzle Park @@ -1845,7 +1857,7 @@ * * View the current statistics with M78. */ -//#define PRINTCOUNTER +#define PRINTCOUNTER #if ENABLED(PRINTCOUNTER) #define PRINTCOUNTER_SAVE_INTERVAL 60 // (minutes) EEPROM save interval during print #endif @@ -1936,14 +1948,14 @@ * SD Card support is disabled by default. If your controller has an SD slot, * you must uncomment the following option or it won't work. */ -//#define SDSUPPORT +#define SDSUPPORT /** * SD CARD: ENABLE CRC * * Use CRC checks and retries on the SD communication. */ -//#define SD_CHECK_AND_RETRY +#define SD_CHECK_AND_RETRY /** * LCD Menu Items @@ -2006,7 +2018,7 @@ // // Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. // -//#define INDIVIDUAL_AXIS_HOMING_MENU +#define INDIVIDUAL_AXIS_HOMING_MENU // // SPEAKER/BUZZER @@ -2014,7 +2026,7 @@ // If you have a speaker that can produce tones, enable it here. // By default Marlin assumes you have a buzzer with a fixed frequency. // -//#define SPEAKER +#define SPEAKER // // The duration and frequency for the UI feedback sound. @@ -2023,8 +2035,8 @@ // Note: Test audio output with the G-Code: // M300 S P // -//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 -//#define LCD_FEEDBACK_FREQUENCY_HZ 5000 +#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 +#define LCD_FEEDBACK_FREQUENCY_HZ 5000 //============================================================================= //======================== LCD / Controller Selection ========================= @@ -2037,7 +2049,7 @@ // // Note: Usually sold with a white PCB. // -//#define REPRAP_DISCOUNT_SMART_CONTROLLER +#define REPRAP_DISCOUNT_SMART_CONTROLLER // // GT2560 (YHCB2004) LCD Display diff --git a/config/examples/Geeetech/Prusa i3 Pro C/Configuration.h b/config/examples/Geeetech/Prusa i3 Pro C/Configuration.h index 78c2dc9160..e96f90dc1f 100644 --- a/config/examples/Geeetech/Prusa i3 Pro C/Configuration.h +++ b/config/examples/Geeetech/Prusa i3 Pro C/Configuration.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Geeetech/Prusa i3 Pro C" + /** * Configuration.h * @@ -69,7 +71,7 @@ // @section info // Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes. +#define STRING_CONFIG_H_AUTHOR "(Phr3d13, default config)" // Who made the changes. //#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) /** @@ -134,11 +136,11 @@ // Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_RAMPS_14_EFB + #define MOTHERBOARD BOARD_GT2560_REV_A #endif // Name displayed in the LCD "Ready" message and Info menu -//#define CUSTOM_MACHINE_NAME "3D Printer" +#define CUSTOM_MACHINE_NAME "i3 Pro C" // Printer's unique ID, used by some programs to differentiate between machines. // Choose your own or use a service like https://www.uuidgenerator.net/version4 @@ -148,7 +150,7 @@ // This defines the number of extruders // :[0, 1, 2, 3, 4, 5, 6, 7, 8] -#define EXTRUDERS 1 +#define EXTRUDERS 2 // Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc. #define DEFAULT_NOMINAL_FILAMENT_DIA 1.75 @@ -306,7 +308,7 @@ // Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing). // The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder). // For the other hotends it is their distance from the extruder 0 hotend. -//#define HOTEND_OFFSET_X { 0.0, 20.00 } // (mm) relative X-offset for each nozzle +#define HOTEND_OFFSET_X { 0.0, 32.00 } // (mm) relative X-offset for each nozzle //#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle //#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle @@ -417,14 +419,14 @@ * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. */ #define TEMP_SENSOR_0 1 -#define TEMP_SENSOR_1 0 +#define TEMP_SENSOR_1 1 #define TEMP_SENSOR_2 0 #define TEMP_SENSOR_3 0 #define TEMP_SENSOR_4 0 #define TEMP_SENSOR_5 0 #define TEMP_SENSOR_6 0 #define TEMP_SENSOR_7 0 -#define TEMP_SENSOR_BED 0 +#define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 #define TEMP_SENSOR_COOLER 0 @@ -752,7 +754,7 @@ //#define Z3_DRIVER_TYPE A4988 //#define Z4_DRIVER_TYPE A4988 #define E0_DRIVER_TYPE A4988 -//#define E1_DRIVER_TYPE A4988 +#define E1_DRIVER_TYPE A4988 //#define E2_DRIVER_TYPE A4988 //#define E3_DRIVER_TYPE A4988 //#define E4_DRIVER_TYPE A4988 @@ -799,14 +801,14 @@ * following movement settings. If fewer factors are given than the * total number of extruders, the last value applies to the rest. */ -//#define DISTINCT_E_FACTORS +#define DISTINCT_E_FACTORS /** * Default Axis Steps Per Unit (steps/mm) * Override with M92 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 500 } +#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 2560, 95, 95 } /** * Default Max Feed Rate (mm/s) @@ -1190,14 +1192,14 @@ // @section machine // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR false -#define INVERT_Y_DIR true +#define INVERT_X_DIR true +#define INVERT_Y_DIR false #define INVERT_Z_DIR false // @section extruder // For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR false +#define INVERT_E0_DIR true #define INVERT_E1_DIR false #define INVERT_E2_DIR false #define INVERT_E3_DIR false @@ -1241,7 +1243,7 @@ #define Z_MIN_POS 0 #define X_MAX_POS X_BED_SIZE #define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 200 +#define Z_MAX_POS 180 /** * Software Endstops @@ -1672,7 +1674,7 @@ * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) */ -//#define EEPROM_SETTINGS // Persistent storage with M500 and M501 +#define EEPROM_SETTINGS // Persistent storage with M500 and M501 //#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. #define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load @@ -1706,14 +1708,14 @@ // Preheat Constants - Up to 5 are supported without changes // #define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 180 -#define PREHEAT_1_TEMP_BED 70 +#define PREHEAT_1_TEMP_HOTEND 200 +#define PREHEAT_1_TEMP_BED 65 #define PREHEAT_1_TEMP_CHAMBER 35 #define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 #define PREHEAT_2_LABEL "ABS" -#define PREHEAT_2_TEMP_HOTEND 240 -#define PREHEAT_2_TEMP_BED 110 +#define PREHEAT_2_TEMP_HOTEND 235 +#define PREHEAT_2_TEMP_BED 95 #define PREHEAT_2_TEMP_CHAMBER 35 #define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 @@ -1728,7 +1730,7 @@ * P1 Raise the nozzle always to Z-park height. * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. */ -//#define NOZZLE_PARK_FEATURE +#define NOZZLE_PARK_FEATURE #if ENABLED(NOZZLE_PARK_FEATURE) // Specify a park position as { X, Y, Z_raise } @@ -1845,7 +1847,7 @@ * * View the current statistics with M78. */ -//#define PRINTCOUNTER +#define PRINTCOUNTER #if ENABLED(PRINTCOUNTER) #define PRINTCOUNTER_SAVE_INTERVAL 60 // (minutes) EEPROM save interval during print #endif @@ -1936,7 +1938,7 @@ * SD Card support is disabled by default. If your controller has an SD slot, * you must uncomment the following option or it won't work. */ -//#define SDSUPPORT +#define SDSUPPORT /** * SD CARD: ENABLE CRC @@ -2014,7 +2016,7 @@ // If you have a speaker that can produce tones, enable it here. // By default Marlin assumes you have a buzzer with a fixed frequency. // -//#define SPEAKER +#define SPEAKER // // The duration and frequency for the UI feedback sound. @@ -2037,7 +2039,7 @@ // // Note: Usually sold with a white PCB. // -//#define REPRAP_DISCOUNT_SMART_CONTROLLER +#define REPRAP_DISCOUNT_SMART_CONTROLLER // // GT2560 (YHCB2004) LCD Display diff --git a/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h b/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h index 5335fa012a..38307dbccc 100644 --- a/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h +++ b/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Geeetech/Prusa i3 Pro C" + /** * Configuration_adv.h * @@ -867,7 +869,7 @@ // On a 300mm bed a 5% grade would give a misalignment of ~1.5cm #define G34_MAX_GRADE 5 // (%) Maximum incline that G34 will handle - #define Z_STEPPER_ALIGN_ITERATIONS 5 // Number of iterations to apply during alignment + #define Z_STEPPER_ALIGN_ITERATIONS 3 // Number of iterations to apply during alignment #define Z_STEPPER_ALIGN_ACC 0.02 // Stop iterating early if the accuracy is better than this #define RESTORE_LEVELING_AFTER_G34 // Restore leveling after G34 is done? // After G34, re-home Z (G28 Z) or just calculate it from the last probe heights? @@ -1175,7 +1177,7 @@ #endif // Include a page of printer information in the LCD Main Menu - //#define LCD_INFO_MENU + #define LCD_INFO_MENU #if ENABLED(LCD_INFO_MENU) //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages #endif @@ -1229,7 +1231,7 @@ #endif // Scroll a longer status message into view - //#define STATUS_MESSAGE_SCROLLING + #define STATUS_MESSAGE_SCROLLING // On the Info Screen, display XY with one decimal place when possible //#define LCD_DECIMAL_SMALL_XY @@ -1301,7 +1303,7 @@ //#define BROWSE_MEDIA_ON_INSERT // Open the file browser when media is inserted - #define EVENT_GCODE_SD_ABORT "G28XY" // G-code to run on SD Abort Print (e.g., "G28XY" or "G27") + #define EVENT_GCODE_SD_ABORT "G27" // G-code to run on SD Abort Print (e.g., "G28XY" or "G27") #if ENABLED(PRINTER_EVENT_LEDS) #define PE_LEDS_COMPLETED_TIME (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination @@ -1381,10 +1383,10 @@ //#define UTF_FILENAME_SUPPORT // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT + #define LONG_FILENAME_HOST_SUPPORT // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES + #define SCROLL_LONG_FILENAMES // Leave the heaters on after Stop Print (not recommended!) //#define SD_ABORT_NO_COOLDOWN @@ -1790,7 +1792,7 @@ * * Warning: Does not respect endstops! */ -//#define BABYSTEPPING +#define BABYSTEPPING #if ENABLED(BABYSTEPPING) //#define INTEGRATED_BABYSTEPPING // EXPERIMENTAL integration of babystepping into the Stepper ISR //#define BABYSTEP_WITHOUT_HOMING @@ -1837,7 +1839,7 @@ * * See https://marlinfw.org/docs/features/lin_advance.html for full instructions. */ -//#define LIN_ADVANCE +#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) //#define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed @@ -2311,7 +2313,7 @@ * * Enable PARK_HEAD_ON_PAUSE to add the G-code M125 Pause and Park. */ -//#define ADVANCED_PAUSE_FEATURE +#define ADVANCED_PAUSE_FEATURE #if ENABLED(ADVANCED_PAUSE_FEATURE) #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. @@ -2349,7 +2351,7 @@ #define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed. #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change. - //#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. + #define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. //#define HOME_BEFORE_FILAMENT_CHANGE // If needed, home before parking for filament change //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. diff --git a/config/examples/Geeetech/Prusa i3 Pro W/Configuration.h b/config/examples/Geeetech/Prusa i3 Pro W/Configuration.h index 78c2dc9160..e990ed1ed9 100644 --- a/config/examples/Geeetech/Prusa i3 Pro W/Configuration.h +++ b/config/examples/Geeetech/Prusa i3 Pro W/Configuration.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Geeetech/Prusa i3 Pro W" + /** * Configuration.h * @@ -69,7 +71,7 @@ // @section info // Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes. +#define STRING_CONFIG_H_AUTHOR "(Phr3d13, default config)" // Who made the changes. //#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) /** @@ -134,11 +136,11 @@ // Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_RAMPS_14_EFB + #define MOTHERBOARD BOARD_GT2560_REV_A_PLUS #endif // Name displayed in the LCD "Ready" message and Info menu -//#define CUSTOM_MACHINE_NAME "3D Printer" +#define CUSTOM_MACHINE_NAME "i3 Pro W" // Printer's unique ID, used by some programs to differentiate between machines. // Choose your own or use a service like https://www.uuidgenerator.net/version4 @@ -306,7 +308,7 @@ // Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing). // The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder). // For the other hotends it is their distance from the extruder 0 hotend. -//#define HOTEND_OFFSET_X { 0.0, 20.00 } // (mm) relative X-offset for each nozzle +//#define HOTEND_OFFSET_X { 0.0, 32.00 } // (mm) relative X-offset for each nozzle //#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle //#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle @@ -424,7 +426,7 @@ #define TEMP_SENSOR_5 0 #define TEMP_SENSOR_6 0 #define TEMP_SENSOR_7 0 -#define TEMP_SENSOR_BED 0 +#define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 #define TEMP_SENSOR_COOLER 0 @@ -806,7 +808,7 @@ * Override with M92 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 500 } +#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 2560, 95 } /** * Default Max Feed Rate (mm/s) @@ -1190,14 +1192,14 @@ // @section machine // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR false +#define INVERT_X_DIR true #define INVERT_Y_DIR true #define INVERT_Z_DIR false // @section extruder // For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR false +#define INVERT_E0_DIR true #define INVERT_E1_DIR false #define INVERT_E2_DIR false #define INVERT_E3_DIR false @@ -1241,7 +1243,7 @@ #define Z_MIN_POS 0 #define X_MAX_POS X_BED_SIZE #define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 200 +#define Z_MAX_POS 180 /** * Software Endstops @@ -1672,7 +1674,7 @@ * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) */ -//#define EEPROM_SETTINGS // Persistent storage with M500 and M501 +#define EEPROM_SETTINGS // Persistent storage with M500 and M501 //#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. #define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load @@ -1706,14 +1708,14 @@ // Preheat Constants - Up to 5 are supported without changes // #define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 180 -#define PREHEAT_1_TEMP_BED 70 +#define PREHEAT_1_TEMP_HOTEND 200 +#define PREHEAT_1_TEMP_BED 65 #define PREHEAT_1_TEMP_CHAMBER 35 #define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 #define PREHEAT_2_LABEL "ABS" -#define PREHEAT_2_TEMP_HOTEND 240 -#define PREHEAT_2_TEMP_BED 110 +#define PREHEAT_2_TEMP_HOTEND 235 +#define PREHEAT_2_TEMP_BED 95 #define PREHEAT_2_TEMP_CHAMBER 35 #define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 @@ -1728,7 +1730,7 @@ * P1 Raise the nozzle always to Z-park height. * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. */ -//#define NOZZLE_PARK_FEATURE +#define NOZZLE_PARK_FEATURE #if ENABLED(NOZZLE_PARK_FEATURE) // Specify a park position as { X, Y, Z_raise } @@ -1845,7 +1847,7 @@ * * View the current statistics with M78. */ -//#define PRINTCOUNTER +#define PRINTCOUNTER #if ENABLED(PRINTCOUNTER) #define PRINTCOUNTER_SAVE_INTERVAL 60 // (minutes) EEPROM save interval during print #endif @@ -1936,7 +1938,7 @@ * SD Card support is disabled by default. If your controller has an SD slot, * you must uncomment the following option or it won't work. */ -//#define SDSUPPORT +#define SDSUPPORT /** * SD CARD: ENABLE CRC @@ -2014,7 +2016,7 @@ // If you have a speaker that can produce tones, enable it here. // By default Marlin assumes you have a buzzer with a fixed frequency. // -//#define SPEAKER +#define SPEAKER // // The duration and frequency for the UI feedback sound. @@ -2037,7 +2039,7 @@ // // Note: Usually sold with a white PCB. // -//#define REPRAP_DISCOUNT_SMART_CONTROLLER +#define REPRAP_DISCOUNT_SMART_CONTROLLER // // GT2560 (YHCB2004) LCD Display diff --git a/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h b/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h index 5335fa012a..46d068f44f 100644 --- a/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h +++ b/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Geeetech/Prusa i3 Pro W" + /** * Configuration_adv.h * @@ -867,7 +869,7 @@ // On a 300mm bed a 5% grade would give a misalignment of ~1.5cm #define G34_MAX_GRADE 5 // (%) Maximum incline that G34 will handle - #define Z_STEPPER_ALIGN_ITERATIONS 5 // Number of iterations to apply during alignment + #define Z_STEPPER_ALIGN_ITERATIONS 3 // Number of iterations to apply during alignment #define Z_STEPPER_ALIGN_ACC 0.02 // Stop iterating early if the accuracy is better than this #define RESTORE_LEVELING_AFTER_G34 // Restore leveling after G34 is done? // After G34, re-home Z (G28 Z) or just calculate it from the last probe heights? @@ -1175,7 +1177,7 @@ #endif // Include a page of printer information in the LCD Main Menu - //#define LCD_INFO_MENU + #define LCD_INFO_MENU #if ENABLED(LCD_INFO_MENU) //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages #endif @@ -1229,7 +1231,7 @@ #endif // Scroll a longer status message into view - //#define STATUS_MESSAGE_SCROLLING + #define STATUS_MESSAGE_SCROLLING // On the Info Screen, display XY with one decimal place when possible //#define LCD_DECIMAL_SMALL_XY @@ -1301,7 +1303,7 @@ //#define BROWSE_MEDIA_ON_INSERT // Open the file browser when media is inserted - #define EVENT_GCODE_SD_ABORT "G28XY" // G-code to run on SD Abort Print (e.g., "G28XY" or "G27") + #define EVENT_GCODE_SD_ABORT "G27" // G-code to run on SD Abort Print (e.g., "G28XY" or "G27") #if ENABLED(PRINTER_EVENT_LEDS) #define PE_LEDS_COMPLETED_TIME (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination @@ -1381,10 +1383,10 @@ //#define UTF_FILENAME_SUPPORT // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT + #define LONG_FILENAME_HOST_SUPPORT // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES + #define SCROLL_LONG_FILENAMES // Leave the heaters on after Stop Print (not recommended!) //#define SD_ABORT_NO_COOLDOWN @@ -1790,7 +1792,7 @@ * * Warning: Does not respect endstops! */ -//#define BABYSTEPPING +#define BABYSTEPPING #if ENABLED(BABYSTEPPING) //#define INTEGRATED_BABYSTEPPING // EXPERIMENTAL integration of babystepping into the Stepper ISR //#define BABYSTEP_WITHOUT_HOMING @@ -1837,7 +1839,7 @@ * * See https://marlinfw.org/docs/features/lin_advance.html for full instructions. */ -//#define LIN_ADVANCE +#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) //#define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed @@ -2311,7 +2313,7 @@ * * Enable PARK_HEAD_ON_PAUSE to add the G-code M125 Pause and Park. */ -//#define ADVANCED_PAUSE_FEATURE +#define ADVANCED_PAUSE_FEATURE #if ENABLED(ADVANCED_PAUSE_FEATURE) #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. @@ -2349,7 +2351,7 @@ #define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed. #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change. - //#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. + #define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. //#define HOME_BEFORE_FILAMENT_CHANGE // If needed, home before parking for filament change //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. diff --git a/config/examples/HMS434/Configuration.h b/config/examples/HMS434/Configuration.h index 78c2dc9160..730d51cc64 100644 --- a/config/examples/HMS434/Configuration.h +++ b/config/examples/HMS434/Configuration.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "HMS434" + /** * Configuration.h * @@ -69,7 +71,7 @@ // @section info // Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes. +#define STRING_CONFIG_H_AUTHOR "(Scheepers, MaukCC)" // Who made the changes. //#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) /** @@ -134,7 +136,7 @@ // Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_RAMPS_14_EFB + #define MOTHERBOARD BOARD_CNCONTROLS_15 #endif // Name displayed in the LCD "Ready" message and Info menu @@ -142,7 +144,7 @@ // Printer's unique ID, used by some programs to differentiate between machines. // Choose your own or use a service like https://www.uuidgenerator.net/version4 -//#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" +#define MACHINE_UUID "75083866-86ea-42b2-b475-7b3a7855e716" // @section extruder @@ -416,17 +418,15 @@ * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. */ -#define TEMP_SENSOR_0 1 -#define TEMP_SENSOR_1 0 -#define TEMP_SENSOR_2 0 -#define TEMP_SENSOR_3 0 -#define TEMP_SENSOR_4 0 -#define TEMP_SENSOR_5 0 -#define TEMP_SENSOR_6 0 -#define TEMP_SENSOR_7 0 -#define TEMP_SENSOR_BED 0 +#define TEMP_SENSOR_0 -1 +#define TEMP_SENSOR_1 0 +#define TEMP_SENSOR_2 0 +#define TEMP_SENSOR_3 0 +#define TEMP_SENSOR_4 0 +#define TEMP_SENSOR_5 0 +#define TEMP_SENSOR_BED 331 #define TEMP_SENSOR_PROBE 0 -#define TEMP_SENSOR_CHAMBER 0 +#define TEMP_SENSOR_CHAMBER 331 #define TEMP_SENSOR_COOLER 0 // Dummy thermistor constant temperature readings, for use with 998 and 999 @@ -453,8 +453,8 @@ #define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target #define TEMP_CHAMBER_RESIDENCY_TIME 10 // (seconds) Time to wait for chamber to "settle" in M191 -#define TEMP_CHAMBER_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_CHAMBER_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target +#define TEMP_CHAMBER_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer +#define TEMP_CHAMBER_HYSTERESIS 2 // (°C) Temperature proximity considered "close enough" to the target // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. @@ -467,21 +467,21 @@ #define HEATER_6_MINTEMP 5 #define HEATER_7_MINTEMP 5 #define BED_MINTEMP 5 -#define CHAMBER_MINTEMP 5 +#define CHAMBER_MINTEMP 18 // Above this temperature the heater will be switched off. // This can protect components from overheating, but NOT from shorts and failures. // (Use MINTEMP for thermistor short/failure protection.) -#define HEATER_0_MAXTEMP 275 -#define HEATER_1_MAXTEMP 275 -#define HEATER_2_MAXTEMP 275 -#define HEATER_3_MAXTEMP 275 -#define HEATER_4_MAXTEMP 275 -#define HEATER_5_MAXTEMP 275 -#define HEATER_6_MAXTEMP 275 -#define HEATER_7_MAXTEMP 275 +#define HEATER_0_MAXTEMP 410 +#define HEATER_1_MAXTEMP 410 +#define HEATER_2_MAXTEMP 410 +#define HEATER_3_MAXTEMP 410 +#define HEATER_4_MAXTEMP 410 +#define HEATER_5_MAXTEMP 410 +#define HEATER_6_MAXTEMP 410 +#define HEATER_7_MAXTEMP 410 #define BED_MAXTEMP 150 -#define CHAMBER_MAXTEMP 60 +#define CHAMBER_MAXTEMP 75 /** * Thermal Overshoot @@ -501,7 +501,7 @@ // Comment the following line to disable PID and enable bang-bang. #define PIDTEMP #define BANG_MAX 255 // Limits current to nozzle while in bang-bang mode; 255=full current -#define PID_MAX BANG_MAX // Limits current to nozzle while PID is active (see PID_FUNCTIONAL_RANGE below); 255=full current +#define PID_MAX 170 // Limits current to nozzle while PID is active (see PID_FUNCTIONAL_RANGE below); 255=full current #define PID_K1 0.95 // Smoothing factor within any PID loop #if ENABLED(PIDTEMP) @@ -513,13 +513,13 @@ #if ENABLED(PID_PARAMS_PER_HOTEND) // Specify between 1 and HOTENDS values per array. // If fewer than EXTRUDER values are provided, the last element will be repeated. - #define DEFAULT_Kp_LIST { 22.20, 22.20 } - #define DEFAULT_Ki_LIST { 1.08, 1.08 } - #define DEFAULT_Kd_LIST { 114.00, 114.00 } + #define DEFAULT_Kp_LIST { 11.30, 11.30 } + #define DEFAULT_Ki_LIST { 0.61, 0.61 } + #define DEFAULT_Kd_LIST { 52.77, 52.77 } #else - #define DEFAULT_Kp 22.20 - #define DEFAULT_Ki 1.08 - #define DEFAULT_Kd 114.00 + #define DEFAULT_Kp 11.30 + #define DEFAULT_Ki 0.61 + #define DEFAULT_Kd 52.77 #endif #endif // PIDTEMP @@ -613,7 +613,7 @@ //#define PID_DEBUG // Sends debug data to the serial port. Use 'M303 D' to toggle activation. //#define PID_OPENLOOP // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX //#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay - #define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature + #define PID_FUNCTIONAL_RANGE 20 // If the temperature difference between the target temperature and the actual temperature // is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max. #endif @@ -627,7 +627,7 @@ * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** */ #define PREVENT_COLD_EXTRUSION -#define EXTRUDE_MINTEMP 170 +#define EXTRUDE_MINTEMP 18 /** * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. @@ -717,13 +717,13 @@ #endif // Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. +#define X_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Y_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Z_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. #define X_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. #define Y_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. #define Z_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_PROBE_ENDSTOP_INVERTING false // Set to true to invert the logic of the probe. +#define Z_MIN_PROBE_ENDSTOP_INVERTING true // Set to true to invert the logic of the probe. /** * Stepper Drivers @@ -806,14 +806,14 @@ * Override with M92 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 500 } +#define DEFAULT_AXIS_STEPS_PER_UNIT { 53.45, 71.19, 160, 169.05 } /** * Default Max Feed Rate (mm/s) * Override with M203 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 } +#define DEFAULT_MAX_FEEDRATE { 1000, 1000, 40, 25 } //#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 #if ENABLED(LIMITED_MAX_FR_EDITING) @@ -826,7 +826,7 @@ * Override with M201 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 } +#define DEFAULT_MAX_ACCELERATION { 500, 500, 100, 10000 } //#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 #if ENABLED(LIMITED_MAX_ACCEL_EDITING) @@ -841,7 +841,7 @@ * M204 R Retract Acceleration * M204 T Travel Acceleration */ -#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves +#define DEFAULT_ACCELERATION 500 // X, Y, Z and E acceleration for printing moves #define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts #define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves @@ -877,7 +877,7 @@ * https://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html */ #if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.013 // (mm) Distance from real junction edge + #define JUNCTION_DEVIATION_MM 0.08 // (mm) Distance from real junction edge #define JD_HANDLE_SMALL_SEGMENTS // Use curvature estimation instead of just the junction angle // for small segments (< 1mm) with large junction angles (> 135°). #endif @@ -906,7 +906,7 @@ * The probe replaces the Z-MIN endstop and is used for Z homing. * (Automatically enables USE_PROBE_FOR_Z_HOMING.) */ -#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN +//#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN // Force the use of the probe for Z-axis homing //#define USE_PROBE_FOR_Z_HOMING @@ -946,7 +946,7 @@ * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. * (e.g., an inductive probe or a nozzle-based probe-switch.) */ -//#define FIX_MOUNTED_PROBE +#define FIX_MOUNTED_PROBE /** * Use the nozzle as the probe, as with a conductive @@ -1055,20 +1055,20 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +#define NOZZLE_TO_PROBE_OFFSET { -21, 22, -1.54 } // Most probes should stay away from the edges of the bed, but // with NOZZLE_AS_PROBE this can be negative for a wider probing area. -#define PROBING_MARGIN 10 +#define PROBING_MARGIN 20 // X and Y axis travel speed (mm/min) between probes -#define XY_PROBE_FEEDRATE (133*60) +#define XY_PROBE_FEEDRATE (200*60) // Feedrate (mm/min) for the first approach when double-probing (MULTIPLE_PROBING == 2) -#define Z_PROBE_FEEDRATE_FAST (4*60) +#define Z_PROBE_FEEDRATE_FAST 900 // Feedrate (mm/min) for the "accurate" probe of each point -#define Z_PROBE_FEEDRATE_SLOW (Z_PROBE_FEEDRATE_FAST / 2) +#define Z_PROBE_FEEDRATE_SLOW 100 /** * Probe Activation Switch @@ -1106,7 +1106,7 @@ * A total of 2 does fast/slow probes with a weighted average. * A total of 3 or more adds more slow probes, taking the average. */ -//#define MULTIPLE_PROBING 2 +#define MULTIPLE_PROBING 2 //#define EXTRA_PROBING 1 /** @@ -1123,10 +1123,10 @@ * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. */ -#define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow +#define Z_CLEARANCE_DEPLOY_PROBE 5 // Z Clearance for Deploy/Stow #define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points -#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes -//#define Z_AFTER_PROBING 5 // Z position after probing is done +#define Z_CLEARANCE_MULTI_PROBE 1 // Z Clearance between multiple probes +#define Z_AFTER_PROBING 5 // Z position after probing is done #define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping @@ -1190,9 +1190,9 @@ // @section machine // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR false -#define INVERT_Y_DIR true -#define INVERT_Z_DIR false +#define INVERT_X_DIR true +#define INVERT_Y_DIR false +#define INVERT_Z_DIR true // @section extruder @@ -1218,7 +1218,7 @@ */ //#define Z_IDLE_HEIGHT Z_HOME_POS -//#define Z_HOMING_HEIGHT 4 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ... +#define Z_HOMING_HEIGHT 4 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ... // Be sure to have this much clearance over your Z_MAX_POS to prevent grinding. //#define Z_AFTER_HOMING 10 // (mm) Height to move to after homing Z @@ -1232,16 +1232,16 @@ // @section machine // The size of the printable area -#define X_BED_SIZE 200 -#define Y_BED_SIZE 200 +#define X_BED_SIZE 450 +#define Y_BED_SIZE 325 // Travel limits (mm) after homing, corresponding to endstop positions. -#define X_MIN_POS 0 -#define Y_MIN_POS 0 +#define X_MIN_POS -72 +#define Y_MIN_POS -84 #define Z_MIN_POS 0 #define X_MAX_POS X_BED_SIZE #define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 200 +#define Z_MAX_POS 400 /** * Software Endstops @@ -1285,7 +1285,7 @@ * RAMPS-based boards use SERVO3_PIN for the first runout sensor. * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. */ -//#define FILAMENT_RUNOUT_SENSOR +#define FILAMENT_RUNOUT_SENSOR #if ENABLED(FILAMENT_RUNOUT_SENSOR) #define FIL_RUNOUT_ENABLED_DEFAULT true // Enable the sensor on startup. Override with M412 followed by M500. #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. @@ -1386,7 +1386,7 @@ * With an LCD controller the process is guided step-by-step. */ //#define AUTO_BED_LEVELING_3POINT -//#define AUTO_BED_LEVELING_LINEAR +#define AUTO_BED_LEVELING_LINEAR //#define AUTO_BED_LEVELING_BILINEAR //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING @@ -1454,8 +1454,8 @@ #if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR) // Set the number of grid points per dimension. - #define GRID_MAX_POINTS_X 3 - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X + #define GRID_MAX_POINTS_X 5 + #define GRID_MAX_POINTS_Y 3 // Probe along the Y axis, advancing X after each column //#define PROBE_Y_FIRST @@ -1595,7 +1595,7 @@ #endif // Homing speeds (mm/min) -#define HOMING_FEEDRATE_MM_M { (50*60), (50*60), (4*60) } +#define HOMING_FEEDRATE_MM_M { (6000), (6000), (900) } // Validate that endstops are triggered on homing moves #define VALIDATE_HOMING_ENDSTOPS @@ -1672,7 +1672,7 @@ * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) */ -//#define EEPROM_SETTINGS // Persistent storage with M500 and M501 +#define EEPROM_SETTINGS // Persistent storage with M500 and M501 //#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. #define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load @@ -1728,16 +1728,16 @@ * P1 Raise the nozzle always to Z-park height. * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. */ -//#define NOZZLE_PARK_FEATURE +#define NOZZLE_PARK_FEATURE #if ENABLED(NOZZLE_PARK_FEATURE) // Specify a park position as { X, Y, Z_raise } - #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 } + #define NOZZLE_PARK_POINT { 225, -50, 5 } //#define NOZZLE_PARK_X_ONLY // X move only is required to park //#define NOZZLE_PARK_Y_ONLY // Y move only is required to park #define NOZZLE_PARK_Z_RAISE_MIN 2 // (mm) Always raise Z by at least this distance - #define NOZZLE_PARK_XY_FEEDRATE 100 // (mm/s) X and Y axes feedrate (also used for delta Z axis) - #define NOZZLE_PARK_Z_FEEDRATE 5 // (mm/s) Z axis feedrate (not used for delta printers) + #define NOZZLE_PARK_XY_FEEDRATE 150 // (mm/s) X and Y axes feedrate (also used for delta Z axis) + #define NOZZLE_PARK_Z_FEEDRATE 15 // (mm/s) Z axis feedrate (not used for delta printers) #endif /** @@ -1777,22 +1777,21 @@ * Caveats: The ending Z should be the same as starting Z. * Attention: EXPERIMENTAL. G-code arguments may change. */ -//#define NOZZLE_CLEAN_FEATURE +#define NOZZLE_CLEAN_FEATURE #if ENABLED(NOZZLE_CLEAN_FEATURE) // Default number of pattern repetitions - #define NOZZLE_CLEAN_STROKES 12 + #define NOZZLE_CLEAN_STROKES 4 // Default number of triangles - #define NOZZLE_CLEAN_TRIANGLES 3 + #define NOZZLE_CLEAN_TRIANGLES 2 - // Specify positions for each tool as { { X, Y, Z }, { X, Y, Z } } - // Dual hotend system may use { { -20, (Y_BED_SIZE / 2), (Z_MIN_POS + 1) }, { 420, (Y_BED_SIZE / 2), (Z_MIN_POS + 1) }} - #define NOZZLE_CLEAN_START_POINT { { 30, 30, (Z_MIN_POS + 1) } } - #define NOZZLE_CLEAN_END_POINT { { 100, 60, (Z_MIN_POS + 1) } } + // Specify positions as { X, Y, Z } . Leave Z blank to not change the Z position + #define NOZZLE_CLEAN_START_POINT { -37, -67, } + #define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) } // Circular pattern radius - #define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5 + #define NOZZLE_CLEAN_CIRCLE_RADIUS 8 // Circular pattern circle fragments number #define NOZZLE_CLEAN_CIRCLE_FN 10 // Middle point of circle @@ -1802,7 +1801,7 @@ #define NOZZLE_CLEAN_GOBACK // For a purge/clean station that's always at the gantry height (thus no Z move) - //#define NOZZLE_CLEAN_NO_Z + #define NOZZLE_CLEAN_NO_Z // For a purge/clean station mounted on the X axis //#define NOZZLE_CLEAN_NO_Y @@ -1845,7 +1844,7 @@ * * View the current statistics with M78. */ -//#define PRINTCOUNTER +#define PRINTCOUNTER #if ENABLED(PRINTCOUNTER) #define PRINTCOUNTER_SAVE_INTERVAL 60 // (minutes) EEPROM save interval during print #endif @@ -1936,7 +1935,7 @@ * SD Card support is disabled by default. If your controller has an SD slot, * you must uncomment the following option or it won't work. */ -//#define SDSUPPORT +#define SDSUPPORT /** * SD CARD: ENABLE CRC @@ -2014,7 +2013,7 @@ // If you have a speaker that can produce tones, enable it here. // By default Marlin assumes you have a buzzer with a fixed frequency. // -//#define SPEAKER +#define SPEAKER // // The duration and frequency for the UI feedback sound. @@ -2636,7 +2635,7 @@ // Temperature status LEDs that display the hotend and bed temperature. // If all hotends, bed temperature, and target temperature are under 54C // then the BLUE led is on. Otherwise the RED led is on. (1C hysteresis) -//#define TEMP_STAT_LEDS +#define TEMP_STAT_LEDS // Support for the BariCUDA Paste Extruder //#define BARICUDA diff --git a/config/examples/HMS434/Configuration_adv.h b/config/examples/HMS434/Configuration_adv.h index 5335fa012a..856dbbf469 100644 --- a/config/examples/HMS434/Configuration_adv.h +++ b/config/examples/HMS434/Configuration_adv.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "HMS434" + /** * Configuration_adv.h * @@ -280,14 +282,14 @@ * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 900 // Seconds + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_PERIOD 900 // Seconds + #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif /** @@ -450,7 +452,7 @@ // Calibration for AD595 / AD8495 sensor to adjust temperature measurements. // The final temperature is calculated as (measuredTemp * GAIN) + OFFSET. #define TEMP_SENSOR_AD595_OFFSET 0.0 -#define TEMP_SENSOR_AD595_GAIN 1.0 +#define TEMP_SENSOR_AD595_GAIN 2.0 // compensate for 3V3 ref voltage #define TEMP_SENSOR_AD8495_OFFSET 0.0 #define TEMP_SENSOR_AD8495_GAIN 1.0 @@ -540,7 +542,7 @@ * Multiple extruders can be assigned to the same pin in which case * the fan will turn on when any selected extruder is above the threshold. */ -#define E0_AUTO_FAN_PIN -1 +//#define E0_AUTO_FAN_PIN -1 #define E1_AUTO_FAN_PIN -1 #define E2_AUTO_FAN_PIN -1 #define E3_AUTO_FAN_PIN -1 @@ -552,12 +554,12 @@ #define COOLER_AUTO_FAN_PIN -1 #define COOLER_FAN_PIN -1 -#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 -#define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed -#define CHAMBER_AUTO_FAN_TEMPERATURE 30 -#define CHAMBER_AUTO_FAN_SPEED 255 -#define COOLER_AUTO_FAN_TEMPERATURE 18 -#define COOLER_AUTO_FAN_SPEED 255 +#define EXTRUDER_AUTO_FAN_TEMPERATURE 35 +#define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed +#define CHAMBER_AUTO_FAN_TEMPERATURE 28 +#define CHAMBER_AUTO_FAN_SPEED 255 +#define COOLER_AUTO_FAN_TEMPERATURE 18 +#define COOLER_AUTO_FAN_SPEED 255 /** * Part-Cooling Fan Multiplexer @@ -742,7 +744,7 @@ //#define HOMING_BACKOFF_POST_MM { 2, 2, 2 } // (mm) Backoff from endstops after homing //#define QUICK_HOME // If G28 contains XY do a diagonal move first -//#define HOME_Y_BEFORE_X // If G28 contains XY home Y before X +#define HOME_Y_BEFORE_X // If G28 contains XY home Y before X //#define HOME_Z_FIRST // Home Z first. Requires a Z-MIN endstop (not a probe). //#define CODEPENDENT_XY_HOMING // If X/Y can't home without homing Y/X first @@ -867,7 +869,7 @@ // On a 300mm bed a 5% grade would give a misalignment of ~1.5cm #define G34_MAX_GRADE 5 // (%) Maximum incline that G34 will handle - #define Z_STEPPER_ALIGN_ITERATIONS 5 // Number of iterations to apply during alignment + #define Z_STEPPER_ALIGN_ITERATIONS 3 // Number of iterations to apply during alignment #define Z_STEPPER_ALIGN_ACC 0.02 // Stop iterating early if the accuracy is better than this #define RESTORE_LEVELING_AFTER_G34 // Restore leveling after G34 is done? // After G34, re-home Z (G28 Z) or just calculate it from the last probe heights? @@ -1790,7 +1792,7 @@ * * Warning: Does not respect endstops! */ -//#define BABYSTEPPING +#define BABYSTEPPING #if ENABLED(BABYSTEPPING) //#define INTEGRATED_BABYSTEPPING // EXPERIMENTAL integration of babystepping into the Stepper ISR //#define BABYSTEP_WITHOUT_HOMING @@ -1798,8 +1800,8 @@ //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way //#define BABYSTEP_MILLIMETER_UNITS // Specify BABYSTEP_MULTIPLICATOR_(XY|Z) in mm instead of micro-steps - #define BABYSTEP_MULTIPLICATOR_Z 1 // (steps or mm) Steps or millimeter distance for each Z babystep - #define BABYSTEP_MULTIPLICATOR_XY 1 // (steps or mm) Steps or millimeter distance for each XY babystep + #define BABYSTEP_MULTIPLICATOR_Z 16 // (steps or mm) Steps or millimeter distance for each Z babystep + #define BABYSTEP_MULTIPLICATOR_XY 16 // (steps or mm) Steps or millimeter distance for each XY babystep //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) @@ -1837,10 +1839,10 @@ * * See https://marlinfw.org/docs/features/lin_advance.html for full instructions. */ -//#define LIN_ADVANCE +#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) //#define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants - #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed + #define LIN_ADVANCE_K 0.02 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // If enabled, this will generate debug information output over USB. //#define EXPERIMENTAL_SCURVE // Enable this option to permit S-Curve Acceleration #endif @@ -2082,9 +2084,9 @@ #if BOTH(SDSUPPORT, DIRECT_STEPPING) #define BLOCK_BUFFER_SIZE 8 #elif ENABLED(SDSUPPORT) - #define BLOCK_BUFFER_SIZE 16 + #define BLOCK_BUFFER_SIZE 8 #else - #define BLOCK_BUFFER_SIZE 16 + #define BLOCK_BUFFER_SIZE 8 #endif // @section serial @@ -2100,18 +2102,18 @@ // For debug-echo: 128 bytes for the optimal speed. // Other output doesn't need to be that speedy. // :[0, 2, 4, 8, 16, 32, 64, 128, 256] -#define TX_BUFFER_SIZE 0 +#define TX_BUFFER_SIZE 32 // Host Receive Buffer Size // Without XON/XOFF flow control (see SERIAL_XON_XOFF below) 32 bytes should be enough. // To use flow control, set this buffer size to at least 1024 bytes. // :[0, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048] -//#define RX_BUFFER_SIZE 1024 +#define RX_BUFFER_SIZE 1024 #if RX_BUFFER_SIZE >= 1024 // Enable to have the controller send XON/XOFF control characters to // the host to signal the RX buffer is becoming full. - //#define SERIAL_XON_XOFF + #define SERIAL_XON_XOFF #endif // Add M575 G-code to change the baud rate @@ -2141,7 +2143,7 @@ * Currently handles M108, M112, M410, M876 * NOTE: Not yet implemented for all platforms. */ -//#define EMERGENCY_PARSER +#define EMERGENCY_PARSER /** * Realtime Reporting (requires EMERGENCY_PARSER) @@ -2170,7 +2172,7 @@ //#define NO_TIMEOUTS 1000 // Milliseconds // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. -//#define ADVANCED_OK +#define ADVANCED_OK // Printrun may have trouble receiving long strings all at once. // This option inserts short delays between lines of serial output. @@ -2311,14 +2313,14 @@ * * Enable PARK_HEAD_ON_PAUSE to add the G-code M125 Pause and Park. */ -//#define ADVANCED_PAUSE_FEATURE +#define ADVANCED_PAUSE_FEATURE #if ENABLED(ADVANCED_PAUSE_FEATURE) - #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. + #define PAUSE_PARK_RETRACT_FEEDRATE 30 // (mm/s) Initial retract feedrate. #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. // This short retract is done immediately, before parking the nozzle. - #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast. + #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 30 // (mm/s) Unload filament feedrate. This can be pretty fast. #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload. + #define FILAMENT_CHANGE_UNLOAD_LENGTH 0 // (mm) The length of filament for a complete unload. // For Bowden, the full length of the tube and nozzle. // For direct drive, the full length of the nozzle. // Set to 0 for manual unloading. @@ -3979,12 +3981,12 @@ #if ENABLED(PRINTCOUNTER) #define SERVICE_WARNING_BUZZES 3 // Activate up to 3 service interval watchdogs - //#define SERVICE_NAME_1 "Service S" - //#define SERVICE_INTERVAL_1 100 // print hours - //#define SERVICE_NAME_2 "Service L" - //#define SERVICE_INTERVAL_2 200 // print hours - //#define SERVICE_NAME_3 "Service 3" - //#define SERVICE_INTERVAL_3 1 // print hours + #define SERVICE_NAME_1 "Lubricate axis" + #define SERVICE_INTERVAL_1 100 // print hours + #define SERVICE_NAME_2 "Change X an Y belt" + #define SERVICE_INTERVAL_2 300 // print hours + #define SERVICE_NAME_3 "Change Z belt" + #define SERVICE_INTERVAL_3 1000 // print hours #endif // @section develop @@ -4002,7 +4004,7 @@ // // M43 - display pin status, toggle pins, watch pins, watch endstops & toggle LED, test servo probe // -//#define PINS_DEBUGGING +#define PINS_DEBUGGING // Enable Marlin dev mode which adds some special commands //#define MARLIN_DEV_MODE diff --git a/config/examples/Infitary/i3-M508/Configuration.h b/config/examples/Infitary/i3-M508/Configuration.h index 78c2dc9160..a348f796fe 100644 --- a/config/examples/Infitary/i3-M508/Configuration.h +++ b/config/examples/Infitary/i3-M508/Configuration.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Infitary/i3-M508" + /** * Configuration.h * @@ -69,7 +71,7 @@ // @section info // Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes. +#define STRING_CONFIG_H_AUTHOR "(tjclement, Infitary M508)" // Who made the changes. //#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) /** @@ -134,11 +136,11 @@ // Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_RAMPS_14_EFB + #define MOTHERBOARD BOARD_RAMPS_13_EFB #endif // Name displayed in the LCD "Ready" message and Info menu -//#define CUSTOM_MACHINE_NAME "3D Printer" +#define CUSTOM_MACHINE_NAME "Infitary M508" // Printer's unique ID, used by some programs to differentiate between machines. // Choose your own or use a service like https://www.uuidgenerator.net/version4 @@ -151,7 +153,7 @@ #define EXTRUDERS 1 // Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc. -#define DEFAULT_NOMINAL_FILAMENT_DIA 1.75 +#define DEFAULT_NOMINAL_FILAMENT_DIA 3.0 // For Cyclops or any "multi-extruder" that shares a single nozzle. //#define SINGLENOZZLE @@ -424,7 +426,7 @@ #define TEMP_SENSOR_5 0 #define TEMP_SENSOR_6 0 #define TEMP_SENSOR_7 0 -#define TEMP_SENSOR_BED 0 +#define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 #define TEMP_SENSOR_COOLER 0 @@ -480,7 +482,7 @@ #define HEATER_5_MAXTEMP 275 #define HEATER_6_MAXTEMP 275 #define HEATER_7_MAXTEMP 275 -#define BED_MAXTEMP 150 +#define BED_MAXTEMP 125 #define CHAMBER_MAXTEMP 60 /** @@ -513,13 +515,13 @@ #if ENABLED(PID_PARAMS_PER_HOTEND) // Specify between 1 and HOTENDS values per array. // If fewer than EXTRUDER values are provided, the last element will be repeated. - #define DEFAULT_Kp_LIST { 22.20, 22.20 } - #define DEFAULT_Ki_LIST { 1.08, 1.08 } - #define DEFAULT_Kd_LIST { 114.00, 114.00 } + #define DEFAULT_Kp_LIST { 213.20, 213.20 } + #define DEFAULT_Ki_LIST { 1.54, 1.54 } + #define DEFAULT_Kd_LIST { 765.00, 765.00 } #else - #define DEFAULT_Kp 22.20 - #define DEFAULT_Ki 1.08 - #define DEFAULT_Kd 114.00 + #define DEFAULT_Kp 213.20 + #define DEFAULT_Ki 1.54 + #define DEFAULT_Kd 765.00 #endif #endif // PIDTEMP @@ -717,13 +719,13 @@ #endif // Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define X_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_PROBE_ENDSTOP_INVERTING false // Set to true to invert the logic of the probe. +#define X_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Y_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Z_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define X_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Y_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Z_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Z_MIN_PROBE_ENDSTOP_INVERTING true // Set to true to invert the logic of the probe. /** * Stepper Drivers @@ -806,14 +808,14 @@ * Override with M92 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 500 } +#define DEFAULT_AXIS_STEPS_PER_UNIT { 100, 100, 400, 92.6 } /** * Default Max Feed Rate (mm/s) * Override with M203 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 } +#define DEFAULT_MAX_FEEDRATE { 400, 400, 5, 25 } //#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 #if ENABLED(LIMITED_MAX_FR_EDITING) @@ -826,7 +828,7 @@ * Override with M201 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 } +#define DEFAULT_MAX_ACCELERATION { 9000, 9000, 100, 10000 } //#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 #if ENABLED(LIMITED_MAX_ACCEL_EDITING) @@ -1190,14 +1192,14 @@ // @section machine // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR false +#define INVERT_X_DIR true #define INVERT_Y_DIR true #define INVERT_Z_DIR false // @section extruder // For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR false +#define INVERT_E0_DIR true #define INVERT_E1_DIR false #define INVERT_E2_DIR false #define INVERT_E3_DIR false @@ -1232,8 +1234,8 @@ // @section machine // The size of the printable area -#define X_BED_SIZE 200 -#define Y_BED_SIZE 200 +#define X_BED_SIZE 205 +#define Y_BED_SIZE 205 // Travel limits (mm) after homing, corresponding to endstop positions. #define X_MIN_POS 0 @@ -1241,7 +1243,7 @@ #define Z_MIN_POS 0 #define X_MAX_POS X_BED_SIZE #define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 200 +#define Z_MAX_POS 185 /** * Software Endstops @@ -1706,14 +1708,14 @@ // Preheat Constants - Up to 5 are supported without changes // #define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 180 -#define PREHEAT_1_TEMP_BED 70 +#define PREHEAT_1_TEMP_HOTEND 200 +#define PREHEAT_1_TEMP_BED 50 #define PREHEAT_1_TEMP_CHAMBER 35 #define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 #define PREHEAT_2_LABEL "ABS" -#define PREHEAT_2_TEMP_HOTEND 240 -#define PREHEAT_2_TEMP_BED 110 +#define PREHEAT_2_TEMP_HOTEND 245 +#define PREHEAT_2_TEMP_BED 100 #define PREHEAT_2_TEMP_CHAMBER 35 #define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 @@ -1936,14 +1938,14 @@ * SD Card support is disabled by default. If your controller has an SD slot, * you must uncomment the following option or it won't work. */ -//#define SDSUPPORT +#define SDSUPPORT /** * SD CARD: ENABLE CRC * * Use CRC checks and retries on the SD communication. */ -//#define SD_CHECK_AND_RETRY +#define SD_CHECK_AND_RETRY /** * LCD Menu Items @@ -2037,7 +2039,7 @@ // // Note: Usually sold with a white PCB. // -//#define REPRAP_DISCOUNT_SMART_CONTROLLER +#define REPRAP_DISCOUNT_SMART_CONTROLLER // // GT2560 (YHCB2004) LCD Display diff --git a/config/examples/Infitary/i3-M508/Configuration_adv.h b/config/examples/Infitary/i3-M508/Configuration_adv.h index 5335fa012a..a2ce8b369e 100644 --- a/config/examples/Infitary/i3-M508/Configuration_adv.h +++ b/config/examples/Infitary/i3-M508/Configuration_adv.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Infitary/i3-M508" + /** * Configuration_adv.h * @@ -736,12 +738,12 @@ //#define SENSORLESS_BACKOFF_MM { 2, 2 } // (mm) Backoff from endstops before sensorless homing -#define HOMING_BUMP_MM { 5, 5, 2 } // (mm) Backoff from endstops after first bump +#define HOMING_BUMP_MM { 5, 5, 1 } // (mm) Backoff from endstops after first bump #define HOMING_BUMP_DIVISOR { 2, 2, 4 } // Re-Bump Speed Divisor (Divides the Homing Feedrate) //#define HOMING_BACKOFF_POST_MM { 2, 2, 2 } // (mm) Backoff from endstops after homing -//#define QUICK_HOME // If G28 contains XY do a diagonal move first +#define QUICK_HOME // If G28 contains XY do a diagonal move first //#define HOME_Y_BEFORE_X // If G28 contains XY home Y before X //#define HOME_Z_FIRST // Home Z first. Requires a Z-MIN endstop (not a probe). //#define CODEPENDENT_XY_HOMING // If X/Y can't home without homing Y/X first @@ -867,7 +869,7 @@ // On a 300mm bed a 5% grade would give a misalignment of ~1.5cm #define G34_MAX_GRADE 5 // (%) Maximum incline that G34 will handle - #define Z_STEPPER_ALIGN_ITERATIONS 5 // Number of iterations to apply during alignment + #define Z_STEPPER_ALIGN_ITERATIONS 3 // Number of iterations to apply during alignment #define Z_STEPPER_ALIGN_ACC 0.02 // Stop iterating early if the accuracy is better than this #define RESTORE_LEVELING_AFTER_G34 // Restore leveling after G34 is done? // After G34, re-home Z (G28 Z) or just calculate it from the last probe heights? @@ -1096,7 +1098,7 @@ * M909, M910 & LCD - only PRINTRBOARD_REVF & RIGIDBOARD_V2 */ //#define PWM_MOTOR_CURRENT { 1300, 1300, 1250 } // Values in milliamps -//#define DIGIPOT_MOTOR_CURRENT { 135,135,135,135,135 } // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A) +#define DIGIPOT_MOTOR_CURRENT { 135,135,135,135,135 } // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A) //#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis /** @@ -3414,7 +3416,7 @@ /** * Auto-report temperatures with M155 S */ -#define AUTO_REPORT_TEMPERATURES +//#define AUTO_REPORT_TEMPERATURES /** * Auto-report position with M154 S @@ -3424,7 +3426,7 @@ /** * Include capabilities in M115 output */ -#define EXTENDED_CAPABILITIES_REPORT +//#define EXTENDED_CAPABILITIES_REPORT #if ENABLED(EXTENDED_CAPABILITIES_REPORT) //#define M115_GEOMETRY_REPORT #endif diff --git a/config/examples/Intamsys/FunmatHT 4988/Configuration.h b/config/examples/Intamsys/FunmatHT 4988/Configuration.h index 78c2dc9160..d27b1664ca 100644 --- a/config/examples/Intamsys/FunmatHT 4988/Configuration.h +++ b/config/examples/Intamsys/FunmatHT 4988/Configuration.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Intamsys/FunmatHT 4988" + /** * Configuration.h * @@ -69,7 +71,7 @@ // @section info // Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes. +#define STRING_CONFIG_H_AUTHOR "3DXtech / Insanity Automation" // Who made the changes. //#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) /** @@ -87,10 +89,10 @@ #define SHOW_BOOTSCREEN // Show the bitmap in Marlin/_Bootscreen.h on startup. -//#define SHOW_CUSTOM_BOOTSCREEN +#define SHOW_CUSTOM_BOOTSCREEN // Show the bitmap in Marlin/_Statusscreen.h on the status screen. -//#define CUSTOM_STATUS_SCREEN_IMAGE +#define CUSTOM_STATUS_SCREEN_IMAGE // @section machine @@ -134,7 +136,7 @@ // Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_RAMPS_14_EFB + #define MOTHERBOARD BOARD_INTAMSYS40 #endif // Name displayed in the LCD "Ready" message and Info menu @@ -318,19 +320,19 @@ * Enable and connect the power supply to the PS_ON_PIN. * Specify whether the power supply is active HIGH or active LOW. */ -//#define PSU_CONTROL +#define PSU_CONTROL //#define PSU_NAME "Power Supply" #if ENABLED(PSU_CONTROL) - #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box + #define PSU_ACTIVE_STATE HIGH // Set 'LOW' for ATX, 'HIGH' for X-Box //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + #define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power //#define PSU_POWERUP_GCODE "M355 S1" // G-code to run after power-on (e.g., case light on) //#define PSU_POWEROFF_GCODE "M355 S0" // G-code to run before power-off (e.g., case light off) - //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin + #define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin #if ENABLED(AUTO_POWER_CONTROL) #define AUTO_POWER_FANS // Turn on PSU if fans need power #define AUTO_POWER_E_FANS @@ -416,7 +418,7 @@ * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. */ -#define TEMP_SENSOR_0 1 +#define TEMP_SENSOR_0 20 #define TEMP_SENSOR_1 0 #define TEMP_SENSOR_2 0 #define TEMP_SENSOR_3 0 @@ -424,9 +426,9 @@ #define TEMP_SENSOR_5 0 #define TEMP_SENSOR_6 0 #define TEMP_SENSOR_7 0 -#define TEMP_SENSOR_BED 0 +#define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 -#define TEMP_SENSOR_CHAMBER 0 +#define TEMP_SENSOR_CHAMBER 1 #define TEMP_SENSOR_COOLER 0 // Dummy thermistor constant temperature readings, for use with 998 and 999 @@ -444,17 +446,17 @@ //#define TEMP_SENSOR_1_AS_REDUNDANT #define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10 -#define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 -#define TEMP_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target +#define TEMP_RESIDENCY_TIME 3 // (seconds) Time to wait for hotend to "settle" in M109 +#define TEMP_WINDOW 3 // (°C) Temperature proximity for the "temperature reached" timer +#define TEMP_HYSTERESIS 5 // (°C) Temperature proximity considered "close enough" to the target -#define TEMP_BED_RESIDENCY_TIME 10 // (seconds) Time to wait for bed to "settle" in M190 +#define TEMP_BED_RESIDENCY_TIME 5 // (seconds) Time to wait for bed to "settle" in M190 #define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer #define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target #define TEMP_CHAMBER_RESIDENCY_TIME 10 // (seconds) Time to wait for chamber to "settle" in M191 #define TEMP_CHAMBER_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_CHAMBER_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target +#define TEMP_CHAMBER_HYSTERESIS 5 // (°C) Temperature proximity considered "close enough" to the target // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. @@ -472,7 +474,7 @@ // Above this temperature the heater will be switched off. // This can protect components from overheating, but NOT from shorts and failures. // (Use MINTEMP for thermistor short/failure protection.) -#define HEATER_0_MAXTEMP 275 +#define HEATER_0_MAXTEMP 415 #define HEATER_1_MAXTEMP 275 #define HEATER_2_MAXTEMP 275 #define HEATER_3_MAXTEMP 275 @@ -481,7 +483,7 @@ #define HEATER_6_MAXTEMP 275 #define HEATER_7_MAXTEMP 275 #define BED_MAXTEMP 150 -#define CHAMBER_MAXTEMP 60 +#define CHAMBER_MAXTEMP 100 /** * Thermal Overshoot @@ -505,21 +507,21 @@ #define PID_K1 0.95 // Smoothing factor within any PID loop #if ENABLED(PIDTEMP) - //#define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) - //#define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) + #define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) + #define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) // Set/get with gcode: M301 E[extruder number, 0-2] #if ENABLED(PID_PARAMS_PER_HOTEND) // Specify between 1 and HOTENDS values per array. // If fewer than EXTRUDER values are provided, the last element will be repeated. - #define DEFAULT_Kp_LIST { 22.20, 22.20 } - #define DEFAULT_Ki_LIST { 1.08, 1.08 } - #define DEFAULT_Kd_LIST { 114.00, 114.00 } + #define DEFAULT_Kp_LIST { 10.50, 10.50 } + #define DEFAULT_Ki_LIST { 0.45, 0.45 } + #define DEFAULT_Kd_LIST { 70.00, 70.00 } #else - #define DEFAULT_Kp 22.20 - #define DEFAULT_Ki 1.08 - #define DEFAULT_Kd 114.00 + #define DEFAULT_Kp 10.50 + #define DEFAULT_Ki 0.45 + #define DEFAULT_Kd 70.00 #endif #endif // PIDTEMP @@ -540,7 +542,7 @@ * heater. If your configuration is significantly different than this and you don't understand * the issues involved, don't use bed PID until someone else verifies that your hardware works. */ -//#define PIDTEMPBED +#define PIDTEMPBED //#define BED_LIMIT_SWITCHING @@ -558,9 +560,9 @@ // 120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) // from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) - #define DEFAULT_bedKp 10.00 - #define DEFAULT_bedKi .023 - #define DEFAULT_bedKd 305.4 + #define DEFAULT_bedKp 104.28 + #define DEFAULT_bedKi 20.53 + #define DEFAULT_bedKd 353.10 // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. #endif // PIDTEMPBED @@ -717,13 +719,13 @@ #endif // Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define X_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_PROBE_ENDSTOP_INVERTING false // Set to true to invert the logic of the probe. +#define X_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Y_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Z_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define X_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Y_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Z_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Z_MIN_PROBE_ENDSTOP_INVERTING true // Set to true to invert the logic of the probe. /** * Stepper Drivers @@ -806,14 +808,14 @@ * Override with M92 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 500 } +#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 800, 92.6 } /** * Default Max Feed Rate (mm/s) * Override with M203 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 } +#define DEFAULT_MAX_FEEDRATE { 300, 300, 20, 70 } //#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 #if ENABLED(LIMITED_MAX_FR_EDITING) @@ -826,7 +828,7 @@ * Override with M201 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 } +#define DEFAULT_MAX_ACCELERATION { 9000, 9000, 100, 10000 } //#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 #if ENABLED(LIMITED_MAX_ACCEL_EDITING) @@ -890,7 +892,7 @@ * * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained */ -//#define S_CURVE_ACCELERATION +#define S_CURVE_ACCELERATION //=========================================================================== //============================= Z Probe Options ============================= @@ -1131,8 +1133,8 @@ #define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping // For M851 give a range for adjusting the Z probe offset -#define Z_PROBE_OFFSET_RANGE_MIN -20 -#define Z_PROBE_OFFSET_RANGE_MAX 20 +#define Z_PROBE_OFFSET_RANGE_MIN -9 +#define Z_PROBE_OFFSET_RANGE_MAX 9 // Enable the M48 repeatability test to test probe accuracy //#define Z_MIN_PROBE_REPEATABILITY_TEST @@ -1190,9 +1192,9 @@ // @section machine // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR false -#define INVERT_Y_DIR true -#define INVERT_Z_DIR false +#define INVERT_X_DIR true +#define INVERT_Y_DIR false +#define INVERT_Z_DIR true // @section extruder @@ -1232,8 +1234,8 @@ // @section machine // The size of the printable area -#define X_BED_SIZE 200 -#define Y_BED_SIZE 200 +#define X_BED_SIZE 260 +#define Y_BED_SIZE 260 // Travel limits (mm) after homing, corresponding to endstop positions. #define X_MIN_POS 0 @@ -1241,7 +1243,7 @@ #define Z_MIN_POS 0 #define X_MAX_POS X_BED_SIZE #define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 200 +#define Z_MAX_POS 260 /** * Software Endstops @@ -1269,7 +1271,7 @@ #endif #if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS) - //#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD + #define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD #endif /** @@ -1285,7 +1287,7 @@ * RAMPS-based boards use SERVO3_PIN for the first runout sensor. * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. */ -//#define FILAMENT_RUNOUT_SENSOR +#define FILAMENT_RUNOUT_SENSOR #if ENABLED(FILAMENT_RUNOUT_SENSOR) #define FIL_RUNOUT_ENABLED_DEFAULT true // Enable the sensor on startup. Override with M412 followed by M500. #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. @@ -1389,14 +1391,14 @@ //#define AUTO_BED_LEVELING_LINEAR //#define AUTO_BED_LEVELING_BILINEAR //#define AUTO_BED_LEVELING_UBL -//#define MESH_BED_LEVELING +#define MESH_BED_LEVELING /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable * leveling immediately after G28. */ -//#define RESTORE_LEVELING_AFTER_G28 +#define RESTORE_LEVELING_AFTER_G28 //#define ENABLE_LEVELING_AFTER_G28 /** @@ -1438,7 +1440,7 @@ /** * Enable the G26 Mesh Validation Pattern tool. */ - //#define G26_MESH_VALIDATION + #define G26_MESH_VALIDATION #if ENABLED(G26_MESH_VALIDATION) #define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle. #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for G26. @@ -1507,7 +1509,7 @@ //=========================================================================== #define MESH_INSET 10 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 3 // Don't use more than 7 points per axis, implementation limited. + #define GRID_MAX_POINTS_X 5 // Don't use more than 7 points per axis, implementation limited. #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS @@ -1518,22 +1520,22 @@ * Add a bed leveling sub-menu for ABL or MBL. * Include a guided procedure if manual probing is enabled. */ -//#define LCD_BED_LEVELING +#define LCD_BED_LEVELING #if ENABLED(LCD_BED_LEVELING) #define MESH_EDIT_Z_STEP 0.025 // (mm) Step size while manually probing Z axis. #define LCD_PROBE_Z_RANGE 4 // (mm) Z Range centered on Z_MIN_POS for LCD Z adjustment - //#define MESH_EDIT_MENU // Add a menu to edit mesh points + #define MESH_EDIT_MENU // Add a menu to edit mesh points #endif // Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS +#define LEVEL_BED_CORNERS #if ENABLED(LEVEL_BED_CORNERS) #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner + #define LEVEL_CENTER_TOO // Move to the center after the last corner //#define LEVEL_CORNERS_USE_PROBE #if ENABLED(LEVEL_CORNERS_USE_PROBE) #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 @@ -1672,12 +1674,12 @@ * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) */ -//#define EEPROM_SETTINGS // Persistent storage with M500 and M501 +#define EEPROM_SETTINGS // Persistent storage with M500 and M501 //#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. #define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load #if ENABLED(EEPROM_SETTINGS) - //#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. + #define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. #endif // @@ -1728,11 +1730,11 @@ * P1 Raise the nozzle always to Z-park height. * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. */ -//#define NOZZLE_PARK_FEATURE +#define NOZZLE_PARK_FEATURE #if ENABLED(NOZZLE_PARK_FEATURE) // Specify a park position as { X, Y, Z_raise } - #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 } + #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 } //#define NOZZLE_PARK_X_ONLY // X move only is required to park //#define NOZZLE_PARK_Y_ONLY // Y move only is required to park #define NOZZLE_PARK_Z_RAISE_MIN 2 // (mm) Always raise Z by at least this distance @@ -1936,7 +1938,7 @@ * SD Card support is disabled by default. If your controller has an SD slot, * you must uncomment the following option or it won't work. */ -//#define SDSUPPORT +#define SDSUPPORT /** * SD CARD: ENABLE CRC @@ -2006,7 +2008,7 @@ // // Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. // -//#define INDIVIDUAL_AXIS_HOMING_MENU +#define INDIVIDUAL_AXIS_HOMING_MENU // // SPEAKER/BUZZER @@ -2014,7 +2016,7 @@ // If you have a speaker that can produce tones, enable it here. // By default Marlin assumes you have a buzzer with a fixed frequency. // -//#define SPEAKER +#define SPEAKER // // The duration and frequency for the UI feedback sound. @@ -2195,7 +2197,7 @@ // RepRapDiscount FULL GRAPHIC Smart Controller // https://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller // -//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER +#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER // // K.3D Full Graphic Smart Controller diff --git a/config/examples/Intamsys/FunmatHT 4988/Configuration_adv.h b/config/examples/Intamsys/FunmatHT 4988/Configuration_adv.h index 5335fa012a..3941ba1ae5 100644 --- a/config/examples/Intamsys/FunmatHT 4988/Configuration_adv.h +++ b/config/examples/Intamsys/FunmatHT 4988/Configuration_adv.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Intamsys/FunmatHT 4988" + /** * Configuration_adv.h * @@ -157,9 +159,8 @@ #endif #if TEMP_SENSOR_CHAMBER - //#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug) + //#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin //#define HEATER_CHAMBER_INVERTING false - //#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug) //#define CHAMBER_FAN // Enable a fan on the chamber #if ENABLED(CHAMBER_FAN) @@ -239,11 +240,11 @@ */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_HYSTERESIS 15 // Degrees Celsius - //#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops + #define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops #if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP) - //#define NO_FAN_SLOWING_IN_PID_TUNING // Don't slow fan speed during M303 + #define NO_FAN_SLOWING_IN_PID_TUNING // Don't slow fan speed during M303 #endif /** @@ -258,7 +259,7 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 20 // Seconds + #define WATCH_TEMP_PERIOD 30 // Seconds #define WATCH_TEMP_INCREASE 2 // Degrees Celsius #endif @@ -273,20 +274,20 @@ * As described above, except for the bed (M140/M190/M303). */ #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_BED_TEMP_INCREASE 1 // Degrees Celsius #endif /** * Thermal Protection parameters for the heated chamber. */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_PERIOD 60 // Seconds + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 5 // Degrees Celsius /** * Heated chamber watch settings (M141/M191). */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds + #define WATCH_CHAMBER_TEMP_PERIOD 360 // Seconds #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius #endif @@ -573,15 +574,15 @@ /** * M355 Case Light on-off / brightness */ -//#define CASE_LIGHT_ENABLE +#define CASE_LIGHT_ENABLE #if ENABLED(CASE_LIGHT_ENABLE) //#define CASE_LIGHT_PIN 4 // Override the default pin if needed #define INVERT_CASE_LIGHT false // Set true if Case Light is ON when pin is LOW #define CASE_LIGHT_DEFAULT_ON true // Set default power-up state on - #define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // Set default power-up brightness (0-255, requires PWM pin) - //#define CASE_LIGHT_NO_BRIGHTNESS // Disable brightness control. Enable for non-PWM lighting. + #define CASE_LIGHT_DEFAULT_BRIGHTNESS 255 // Set default power-up brightness (0-255, requires PWM pin) + #define CASE_LIGHT_NO_BRIGHTNESS // Disable brightness control. Enable for non-PWM lighting. //#define CASE_LIGHT_MAX_PWM 128 // Limit PWM duty cycle (0-255) - //#define CASE_LIGHT_MENU // Add Case Light options to the LCD menu + #define CASE_LIGHT_MENU // Add Case Light options to the LCD menu #if ENABLED(NEOPIXEL_LED) //#define CASE_LIGHT_USE_NEOPIXEL // Use NeoPixel LED as case light #endif @@ -741,7 +742,7 @@ //#define HOMING_BACKOFF_POST_MM { 2, 2, 2 } // (mm) Backoff from endstops after homing -//#define QUICK_HOME // If G28 contains XY do a diagonal move first +#define QUICK_HOME // If G28 contains XY do a diagonal move first //#define HOME_Y_BEFORE_X // If G28 contains XY home Y before X //#define HOME_Z_FIRST // Home Z first. Requires a Z-MIN endstop (not a probe). //#define CODEPENDENT_XY_HOMING // If X/Y can't home without homing Y/X first @@ -915,10 +916,10 @@ //#define MULTI_NOZZLE_DUPLICATION // By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step. -#define INVERT_X_STEP_PIN false -#define INVERT_Y_STEP_PIN false -#define INVERT_Z_STEP_PIN false -#define INVERT_E_STEP_PIN false +#define INVERT_X_STEP_PIN true +#define INVERT_Y_STEP_PIN true +#define INVERT_Z_STEP_PIN true +#define INVERT_E_STEP_PIN true /** * Idle Stepper Shutdown @@ -1095,7 +1096,7 @@ * M908 - BQ_ZUM_MEGA_3D, RAMBO, PRINTRBOARD_REVF, RIGIDBOARD_V2 & SCOOVO_X9H * M909, M910 & LCD - only PRINTRBOARD_REVF & RIGIDBOARD_V2 */ -//#define PWM_MOTOR_CURRENT { 1300, 1300, 1250 } // Values in milliamps +#define PWM_MOTOR_CURRENT { 1300, 1300, 1250 } // Values in milliamps //#define DIGIPOT_MOTOR_CURRENT { 135,135,135,135,135 } // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A) //#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis @@ -1219,7 +1220,7 @@ #if HAS_DISPLAY // The timeout (in ms) to return to the status screen from sub-menus - //#define LCD_TIMEOUT_TO_STATUS 15000 + #define LCD_TIMEOUT_TO_STATUS 15000 #if ENABLED(SHOW_BOOTSCREEN) #define BOOTSCREEN_TIMEOUT 4000 // (ms) Total Duration to display the boot screen(s) @@ -1229,13 +1230,13 @@ #endif // Scroll a longer status message into view - //#define STATUS_MESSAGE_SCROLLING + #define STATUS_MESSAGE_SCROLLING // On the Info Screen, display XY with one decimal place when possible //#define LCD_DECIMAL_SMALL_XY // Add an 'M73' G-code to set the current percentage - //#define LCD_SET_PROGRESS_MANUALLY + #define LCD_SET_PROGRESS_MANUALLY // Show the E position (filament used) during printing //#define LCD_SHOW_E_TOTAL @@ -1381,10 +1382,10 @@ //#define UTF_FILENAME_SUPPORT // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT + #define LONG_FILENAME_HOST_SUPPORT // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES + #define SCROLL_LONG_FILENAMES // Leave the heaters on after Stop Print (not recommended!) //#define SD_ABORT_NO_COOLDOWN @@ -1406,7 +1407,7 @@ /** * Auto-report SdCard status with M27 S */ - //#define AUTO_REPORT_SD_STATUS + #define AUTO_REPORT_SD_STATUS /** * Support for USB thumb drives using an Arduino USB Host Shield or @@ -1790,18 +1791,18 @@ * * Warning: Does not respect endstops! */ -//#define BABYSTEPPING +#define BABYSTEPPING #if ENABLED(BABYSTEPPING) - //#define INTEGRATED_BABYSTEPPING // EXPERIMENTAL integration of babystepping into the Stepper ISR + #define INTEGRATED_BABYSTEPPING // EXPERIMENTAL integration of babystepping into the Stepper ISR //#define BABYSTEP_WITHOUT_HOMING - //#define BABYSTEP_ALWAYS_AVAILABLE // Allow babystepping at all times (not just during movement). + #define BABYSTEP_ALWAYS_AVAILABLE // Allow babystepping at all times (not just during movement). //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way //#define BABYSTEP_MILLIMETER_UNITS // Specify BABYSTEP_MULTIPLICATOR_(XY|Z) in mm instead of micro-steps - #define BABYSTEP_MULTIPLICATOR_Z 1 // (steps or mm) Steps or millimeter distance for each Z babystep + #define BABYSTEP_MULTIPLICATOR_Z 20 // (steps or mm) Steps or millimeter distance for each Z babystep #define BABYSTEP_MULTIPLICATOR_XY 1 // (steps or mm) Steps or millimeter distance for each XY babystep - //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. + #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. // Note: Extra time may be added to mitigate controller latency. @@ -1816,7 +1817,7 @@ //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping #if ENABLED(BABYSTEP_ZPROBE_OFFSET) //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - //#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor + #define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif @@ -2141,7 +2142,7 @@ * Currently handles M108, M112, M410, M876 * NOTE: Not yet implemented for all platforms. */ -//#define EMERGENCY_PARSER +#define EMERGENCY_PARSER /** * Realtime Reporting (requires EMERGENCY_PARSER) @@ -2167,10 +2168,10 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +#define NO_TIMEOUTS 1000 // Milliseconds // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. -//#define ADVANCED_OK +#define ADVANCED_OK // Printrun may have trouble receiving long strings all at once. // This option inserts short delays between lines of serial output. @@ -2311,7 +2312,7 @@ * * Enable PARK_HEAD_ON_PAUSE to add the G-code M125 Pause and Park. */ -//#define ADVANCED_PAUSE_FEATURE +#define ADVANCED_PAUSE_FEATURE #if ENABLED(ADVANCED_PAUSE_FEATURE) #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. @@ -2337,7 +2338,7 @@ // Filament can be extruded repeatedly from the Filament Change menu // until extrusion is consistent, and to purge old filament. #define ADVANCED_PAUSE_RESUME_PRIME 0 // (mm) Extra distance to prime nozzle after returning from park. - //#define ADVANCED_PAUSE_FANS_PAUSE // Turn off print-cooling fans while the machine is paused. + #define ADVANCED_PAUSE_FANS_PAUSE // Turn off print-cooling fans while the machine is paused. // Filament Unload does a Retract, Delay, and Purge first: #define FILAMENT_UNLOAD_PURGE_RETRACT 13 // (mm) Unload initial retract length. @@ -2346,14 +2347,14 @@ #define FILAMENT_UNLOAD_PURGE_FEEDRATE 25 // (mm/s) feedrate to purge before unload #define PAUSE_PARK_NOZZLE_TIMEOUT 45 // (seconds) Time limit before the nozzle is turned off for safety. - #define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed. + #define FILAMENT_CHANGE_ALERT_BEEPS 2 // Number of alert beeps to play when a response is needed. #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change. - //#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. - //#define HOME_BEFORE_FILAMENT_CHANGE // If needed, home before parking for filament change + #define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. + #define HOME_BEFORE_FILAMENT_CHANGE // If needed, home before parking for filament change - //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. - //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) + #define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. + #define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) #endif // @section tmc @@ -3650,9 +3651,9 @@ * Host Prompt Support enables Marlin to use the host for user prompts so * filament runout and other processes can be managed from the host side. */ -//#define HOST_ACTION_COMMANDS +#define HOST_ACTION_COMMANDS #if ENABLED(HOST_ACTION_COMMANDS) - //#define HOST_PROMPT_SUPPORT + #define HOST_PROMPT_SUPPORT //#define HOST_START_MENU_ITEM // Add a menu item that tells the host to start #endif @@ -3661,10 +3662,7 @@ * * Implement M486 to allow Marlin to skip objects */ -//#define CANCEL_OBJECTS -#if ENABLED(CANCEL_OBJECTS) - #define CANCEL_OBJECTS_REPORTING // Emit the current object as a status message -#endif +#define CANCEL_OBJECTS /** * I2C position encoders for closed loop control. @@ -4002,7 +4000,7 @@ // // M43 - display pin status, toggle pins, watch pins, watch endstops & toggle LED, test servo probe // -//#define PINS_DEBUGGING +#define PINS_DEBUGGING // Enable Marlin dev mode which adds some special commands //#define MARLIN_DEV_MODE diff --git a/config/examples/JGAurora/A1/Configuration.h b/config/examples/JGAurora/A1/Configuration.h index 78c2dc9160..2372bc51a7 100644 --- a/config/examples/JGAurora/A1/Configuration.h +++ b/config/examples/JGAurora/A1/Configuration.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "JGAurora/A1" + /** * Configuration.h * @@ -69,7 +71,8 @@ // @section info // Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes. + +#define STRING_CONFIG_H_AUTHOR "(Roberto Mariani & Samuel Pinches)" // Who made the changes. //#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) /** @@ -102,7 +105,7 @@ * * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] */ -#define SERIAL_PORT 0 +#define SERIAL_PORT 1 /** * Select a secondary serial port on the board to use for communication with the host. @@ -134,11 +137,11 @@ // Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_RAMPS_14_EFB + #define MOTHERBOARD BOARD_JGAURORA_A5S_A1 #endif // Name displayed in the LCD "Ready" message and Info menu -//#define CUSTOM_MACHINE_NAME "3D Printer" +#define CUSTOM_MACHINE_NAME "JGAurora A1" // Printer's unique ID, used by some programs to differentiate between machines. // Choose your own or use a service like https://www.uuidgenerator.net/version4 @@ -424,7 +427,7 @@ #define TEMP_SENSOR_5 0 #define TEMP_SENSOR_6 0 #define TEMP_SENSOR_7 0 -#define TEMP_SENSOR_BED 0 +#define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 #define TEMP_SENSOR_COOLER 0 @@ -505,21 +508,22 @@ #define PID_K1 0.95 // Smoothing factor within any PID loop #if ENABLED(PIDTEMP) - //#define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) - //#define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) + #define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) + #define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) // Set/get with gcode: M301 E[extruder number, 0-2] + // Tuned by Sam Pinches 18th March 2019, on A5S at 220C. #if ENABLED(PID_PARAMS_PER_HOTEND) // Specify between 1 and HOTENDS values per array. // If fewer than EXTRUDER values are provided, the last element will be repeated. - #define DEFAULT_Kp_LIST { 22.20, 22.20 } - #define DEFAULT_Ki_LIST { 1.08, 1.08 } - #define DEFAULT_Kd_LIST { 114.00, 114.00 } + #define DEFAULT_Kp_LIST { 32.73, 32.73 } + #define DEFAULT_Ki_LIST { 3.68, 3.68 } + #define DEFAULT_Kd_LIST { 72.83, 72.83 } #else - #define DEFAULT_Kp 22.20 - #define DEFAULT_Ki 1.08 - #define DEFAULT_Kd 114.00 + #define DEFAULT_Kp 32.73 + #define DEFAULT_Ki 3.68 + #define DEFAULT_Kd 72.83 #endif #endif // PIDTEMP @@ -540,7 +544,7 @@ * heater. If your configuration is significantly different than this and you don't understand * the issues involved, don't use bed PID until someone else verifies that your hardware works. */ -//#define PIDTEMPBED +#define PIDTEMPBED //#define BED_LIMIT_SWITCHING @@ -558,9 +562,11 @@ // 120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) // from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) - #define DEFAULT_bedKp 10.00 - #define DEFAULT_bedKi .023 - #define DEFAULT_bedKd 305.4 + + // Tuned by Sam Pinches on A5S at 75C (18th March, 2019) + #define DEFAULT_bedKp 175.83 + #define DEFAULT_bedKi 28.85 + #define DEFAULT_bedKd 267.90 // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. #endif // PIDTEMPBED @@ -634,7 +640,7 @@ * Note: For Bowden Extruders make this large enough to allow load/unload. */ #define PREVENT_LENGTHY_EXTRUDE -#define EXTRUDE_MAXLENGTH 200 +#define EXTRUDE_MAXLENGTH 1000 //=========================================================================== //======================== Thermal Runaway Protection ======================= @@ -683,10 +689,10 @@ // Specify here all the endstop connectors that are connected to any endstop or probe. // Almost all printers will be using one per axis. Probes will use one or more of the // extra connectors. Leave undefined any used for non-endstop and non-probe purposes. -#define USE_XMIN_PLUG +//#define USE_XMIN_PLUG #define USE_YMIN_PLUG #define USE_ZMIN_PLUG -//#define USE_XMAX_PLUG +#define USE_XMAX_PLUG //#define USE_YMAX_PLUG //#define USE_ZMAX_PLUG @@ -717,12 +723,12 @@ #endif // Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define X_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. +#define X_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Y_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Z_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define X_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Y_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Z_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. #define Z_MIN_PROBE_ENDSTOP_INVERTING false // Set to true to invert the logic of the probe. /** @@ -806,14 +812,14 @@ * Override with M92 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 500 } +#define DEFAULT_AXIS_STEPS_PER_UNIT { 160, 160, 1600, 202 } /** * Default Max Feed Rate (mm/s) * Override with M203 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 } +#define DEFAULT_MAX_FEEDRATE { 360, 150, 30, 40 } //#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 #if ENABLED(LIMITED_MAX_FR_EDITING) @@ -826,7 +832,7 @@ * Override with M201 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 } +#define DEFAULT_MAX_ACCELERATION { 1200, 350, 100, 500 } //#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 #if ENABLED(LIMITED_MAX_ACCEL_EDITING) @@ -841,9 +847,9 @@ * M204 R Retract Acceleration * M204 T Travel Acceleration */ -#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves +#define DEFAULT_ACCELERATION 500 // X, Y, Z and E acceleration for printing moves +#define DEFAULT_RETRACT_ACCELERATION 500 // E acceleration for retracts +#define DEFAULT_TRAVEL_ACCELERATION 500 // X, Y, Z acceleration for travel (non printing) moves /** * Default Jerk limits (mm/s) @@ -855,9 +861,9 @@ */ //#define CLASSIC_JERK #if ENABLED(CLASSIC_JERK) - #define DEFAULT_XJERK 10.0 - #define DEFAULT_YJERK 10.0 - #define DEFAULT_ZJERK 0.3 + #define DEFAULT_XJERK 13.0 + #define DEFAULT_YJERK 5.0 + #define DEFAULT_ZJERK 0.4 //#define TRAVEL_EXTRA_XYJERK 0.0 // Additional jerk allowance for all travel moves @@ -877,7 +883,7 @@ * https://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html */ #if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.013 // (mm) Distance from real junction edge + #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge #define JD_HANDLE_SMALL_SEGMENTS // Use curvature estimation instead of just the junction angle // for small segments (< 1mm) with large junction angles (> 135°). #endif @@ -890,7 +896,7 @@ * * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained */ -//#define S_CURVE_ACCELERATION +#define S_CURVE_ACCELERATION //=========================================================================== //============================= Z Probe Options ============================= @@ -1065,10 +1071,10 @@ #define XY_PROBE_FEEDRATE (133*60) // Feedrate (mm/min) for the first approach when double-probing (MULTIPLE_PROBING == 2) -#define Z_PROBE_FEEDRATE_FAST (4*60) +#define Z_PROBE_FEEDRATE_FAST (12*60) // Feedrate (mm/min) for the "accurate" probe of each point -#define Z_PROBE_FEEDRATE_SLOW (Z_PROBE_FEEDRATE_FAST / 2) +#define Z_PROBE_FEEDRATE_SLOW (Z_PROBE_FEEDRATE_FAST / 4) /** * Probe Activation Switch @@ -1197,8 +1203,8 @@ // @section extruder // For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR false -#define INVERT_E1_DIR false +#define INVERT_E0_DIR true +#define INVERT_E1_DIR true #define INVERT_E2_DIR false #define INVERT_E3_DIR false #define INVERT_E4_DIR false @@ -1225,23 +1231,23 @@ // Direction of endstops when homing; 1=MAX, -1=MIN // :[-1,1] -#define X_HOME_DIR -1 +#define X_HOME_DIR 1 #define Y_HOME_DIR -1 #define Z_HOME_DIR -1 // @section machine // The size of the printable area -#define X_BED_SIZE 200 -#define Y_BED_SIZE 200 +#define X_BED_SIZE 310 +#define Y_BED_SIZE 305 // Travel limits (mm) after homing, corresponding to endstop positions. #define X_MIN_POS 0 -#define Y_MIN_POS 0 +#define Y_MIN_POS -10 #define Z_MIN_POS 0 #define X_MAX_POS X_BED_SIZE -#define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 200 +#define Y_MAX_POS Y_BED_SIZE+10 +#define Z_MAX_POS 310 /** * Software Endstops @@ -1389,14 +1395,14 @@ //#define AUTO_BED_LEVELING_LINEAR //#define AUTO_BED_LEVELING_BILINEAR //#define AUTO_BED_LEVELING_UBL -//#define MESH_BED_LEVELING +#define MESH_BED_LEVELING /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable * leveling immediately after G28. */ -//#define RESTORE_LEVELING_AFTER_G28 +#define RESTORE_LEVELING_AFTER_G28 //#define ENABLE_LEVELING_AFTER_G28 /** @@ -1438,7 +1444,7 @@ /** * Enable the G26 Mesh Validation Pattern tool. */ - //#define G26_MESH_VALIDATION + #define G26_MESH_VALIDATION #if ENABLED(G26_MESH_VALIDATION) #define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle. #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for G26. @@ -1484,7 +1490,7 @@ //========================= Unified Bed Leveling ============================ //=========================================================================== - //#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh + #define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh #define MESH_INSET 1 // Set Mesh bounds as an inset region of the bed #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. @@ -1507,7 +1513,7 @@ //=========================================================================== #define MESH_INSET 10 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 3 // Don't use more than 7 points per axis, implementation limited. + #define GRID_MAX_POINTS_X 5 // Don't use more than 7 points per axis, implementation limited. #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS @@ -1518,21 +1524,21 @@ * Add a bed leveling sub-menu for ABL or MBL. * Include a guided procedure if manual probing is enabled. */ -//#define LCD_BED_LEVELING +#define LCD_BED_LEVELING #if ENABLED(LCD_BED_LEVELING) #define MESH_EDIT_Z_STEP 0.025 // (mm) Step size while manually probing Z axis. #define LCD_PROBE_Z_RANGE 4 // (mm) Z Range centered on Z_MIN_POS for LCD Z adjustment - //#define MESH_EDIT_MENU // Add a menu to edit mesh points + #define MESH_EDIT_MENU // Add a menu to edit mesh points #endif // Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS +#define LEVEL_BED_CORNERS #if ENABLED(LEVEL_BED_CORNERS) #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define LEVEL_CORNERS_Z_HOP 5.0 // (mm) Z height of nozzle between leveling points //#define LEVEL_CENTER_TOO // Move to the center after the last corner //#define LEVEL_CORNERS_USE_PROBE #if ENABLED(LEVEL_CORNERS_USE_PROBE) @@ -1575,7 +1581,7 @@ // Manually set the home position. Leave these undefined for automatic settings. // For DELTA this is the top-center of the Cartesian print volume. //#define MANUAL_X_HOME_POS 0 -//#define MANUAL_Y_HOME_POS 0 +#define MANUAL_Y_HOME_POS -7 //#define MANUAL_Z_HOME_POS 0 // Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area. @@ -1595,7 +1601,7 @@ #endif // Homing speeds (mm/min) -#define HOMING_FEEDRATE_MM_M { (50*60), (50*60), (4*60) } +#define HOMING_FEEDRATE_MM_M { (90*60), (90*60), (12*60) } // Validate that endstops are triggered on homing moves #define VALIDATE_HOMING_ENDSTOPS @@ -1672,12 +1678,12 @@ * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) */ -//#define EEPROM_SETTINGS // Persistent storage with M500 and M501 +#define EEPROM_SETTINGS // Persistent storage with M500 and M501 //#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. #define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load #if ENABLED(EEPROM_SETTINGS) - //#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. + #define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. #endif // @@ -1706,14 +1712,14 @@ // Preheat Constants - Up to 5 are supported without changes // #define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 180 -#define PREHEAT_1_TEMP_BED 70 +#define PREHEAT_1_TEMP_HOTEND 205 +#define PREHEAT_1_TEMP_BED 58 #define PREHEAT_1_TEMP_CHAMBER 35 -#define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 +#define PREHEAT_1_FAN_SPEED 255 // Value from 0 to 255 #define PREHEAT_2_LABEL "ABS" -#define PREHEAT_2_TEMP_HOTEND 240 -#define PREHEAT_2_TEMP_BED 110 +#define PREHEAT_2_TEMP_HOTEND 245 +#define PREHEAT_2_TEMP_BED 105 #define PREHEAT_2_TEMP_CHAMBER 35 #define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 @@ -1728,7 +1734,7 @@ * P1 Raise the nozzle always to Z-park height. * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. */ -//#define NOZZLE_PARK_FEATURE +#define NOZZLE_PARK_FEATURE #if ENABLED(NOZZLE_PARK_FEATURE) // Specify a park position as { X, Y, Z_raise } @@ -1936,7 +1942,8 @@ * SD Card support is disabled by default. If your controller has an SD slot, * you must uncomment the following option or it won't work. */ -//#define SDSUPPORT +#define SDSUPPORT +#define SDIO_SUPPORT /** * SD CARD: ENABLE CRC @@ -1960,13 +1967,13 @@ // This option overrides the default number of encoder pulses needed to // produce one step. Should be increased for high-resolution encoders. // -//#define ENCODER_PULSES_PER_STEP 4 +//#define ENCODER_PULSES_PER_STEP 2 // // Use this option to override the number of step signals required to // move between next/prev menu items. // -//#define ENCODER_STEPS_PER_MENU_ITEM 1 +//#define ENCODER_STEPS_PER_MENU_ITEM 2 /** * Encoder Direction Options @@ -1991,7 +1998,7 @@ // If CLOCKWISE normally moves DOWN this makes it go UP. // If CLOCKWISE normally moves UP this makes it go DOWN. // -//#define REVERSE_MENU_DIRECTION +#define REVERSE_MENU_DIRECTION // // This option reverses the encoder direction for Select Screen. @@ -2518,17 +2525,17 @@ // // Generic TFT with detailed options // -//#define TFT_GENERIC +#define TFT_GENERIC #if ENABLED(TFT_GENERIC) // :[ 'AUTO', 'ST7735', 'ST7789', 'ST7796', 'R61505', 'ILI9328', 'ILI9341', 'ILI9488' ] #define TFT_DRIVER AUTO // Interface. Enable one of the following options: - //#define TFT_INTERFACE_FSMC + #define TFT_INTERFACE_FSMC //#define TFT_INTERFACE_SPI // TFT Resolution. Enable one of the following options: - //#define TFT_RES_320x240 + #define TFT_RES_320x240 //#define TFT_RES_480x272 //#define TFT_RES_480x320 #endif @@ -2543,7 +2550,7 @@ * For LVGL_UI also copy the 'assets' folder from the build directory to the * root of your SD card, together with the compiled firmware. */ -//#define TFT_CLASSIC_UI +#define TFT_CLASSIC_UI //#define TFT_COLOR_UI //#define TFT_LVGL_UI @@ -2573,19 +2580,21 @@ // // Touch Screen Settings // -//#define TOUCH_SCREEN +#define TOUCH_SCREEN #if ENABLED(TOUCH_SCREEN) - #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens - #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus + #define BUTTON_DELAY_EDIT 75 // (ms) Button repeat delay for edit screens + #define BUTTON_DELAY_MENU 100 // (ms) Button repeat delay for menus #define TOUCH_SCREEN_CALIBRATION - //#define TOUCH_CALIBRATION_X 12316 - //#define TOUCH_CALIBRATION_Y -8981 - //#define TOUCH_OFFSET_X -43 - //#define TOUCH_OFFSET_Y 257 + #define TOUCH_CALIBRATION_X 12316 + #define TOUCH_CALIBRATION_Y -8981 + #define TOUCH_OFFSET_X -43 + #define TOUCH_OFFSET_Y 257 //#define TOUCH_ORIENTATION TOUCH_LANDSCAPE + #define XPT2046_Z1_THRESHOLD 1 + #if BOTH(TOUCH_SCREEN_CALIBRATION, EEPROM_SETTINGS) #define TOUCH_CALIBRATION_AUTO_SAVE // Auto save successful calibration values to EEPROM #endif @@ -2618,7 +2627,7 @@ // Use software PWM to drive the fan, as for the heaters. This uses a very low frequency // which is not as annoying as with the hardware PWM. On the other hand, if this frequency // is too low, you should also increment SOFT_PWM_SCALE. -//#define FAN_SOFT_PWM +#define FAN_SOFT_PWM // Incrementing this by 1 will double the software PWM frequency, // affecting heaters, and the fan if FAN_SOFT_PWM is enabled. @@ -2675,10 +2684,10 @@ //#define RGBW_LED #if EITHER(RGB_LED, RGBW_LED) - //#define RGB_LED_R_PIN 34 - //#define RGB_LED_G_PIN 43 - //#define RGB_LED_B_PIN 35 - //#define RGB_LED_W_PIN -1 + #define RGB_LED_R_PIN 34 + #define RGB_LED_G_PIN 43 + #define RGB_LED_B_PIN 35 + #define RGB_LED_W_PIN -1 #endif // Support for Adafruit NeoPixel LED driver diff --git a/config/examples/JGAurora/A1/Configuration_adv.h b/config/examples/JGAurora/A1/Configuration_adv.h index 5335fa012a..26febf22d0 100644 --- a/config/examples/JGAurora/A1/Configuration_adv.h +++ b/config/examples/JGAurora/A1/Configuration_adv.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "JGAurora/A1" + /** * Configuration_adv.h * @@ -113,6 +115,11 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#define HEATER_BED_INVERTING 1 +#define HEATER_0_INVERTING 1 +//#define HEATER_1_INVERTING 0 +#define FAN_INVERTING 1 + #if TEMP_SENSOR_COOLER == 1000 #define COOLER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor #define COOLER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C @@ -496,7 +503,7 @@ * * Define one or both of these to override the default 0-255 range. */ -//#define FAN_MIN_PWM 50 +#define FAN_MIN_PWM 30 //#define FAN_MAX_PWM 128 /** @@ -737,11 +744,11 @@ //#define SENSORLESS_BACKOFF_MM { 2, 2 } // (mm) Backoff from endstops before sensorless homing #define HOMING_BUMP_MM { 5, 5, 2 } // (mm) Backoff from endstops after first bump -#define HOMING_BUMP_DIVISOR { 2, 2, 4 } // Re-Bump Speed Divisor (Divides the Homing Feedrate) +#define HOMING_BUMP_DIVISOR { 5, 5, 5 } // Re-Bump Speed Divisor (Divides the Homing Feedrate) -//#define HOMING_BACKOFF_POST_MM { 2, 2, 2 } // (mm) Backoff from endstops after homing +#define HOMING_BACKOFF_POST_MM { 1, 1, 0 } // (mm) Backoff from endstops after homing -//#define QUICK_HOME // If G28 contains XY do a diagonal move first +#define QUICK_HOME // If G28 contains XY do a diagonal move first //#define HOME_Y_BEFORE_X // If G28 contains XY home Y before X //#define HOME_Z_FIRST // Home Z first. Requires a Z-MIN endstop (not a probe). //#define CODEPENDENT_XY_HOMING // If X/Y can't home without homing Y/X first @@ -867,7 +874,7 @@ // On a 300mm bed a 5% grade would give a misalignment of ~1.5cm #define G34_MAX_GRADE 5 // (%) Maximum incline that G34 will handle - #define Z_STEPPER_ALIGN_ITERATIONS 5 // Number of iterations to apply during alignment + #define Z_STEPPER_ALIGN_ITERATIONS 3 // Number of iterations to apply during alignment #define Z_STEPPER_ALIGN_ACC 0.02 // Stop iterating early if the accuracy is better than this #define RESTORE_LEVELING_AFTER_G34 // Restore leveling after G34 is done? // After G34, re-home Z (G28 Z) or just calculate it from the last probe heights? @@ -1134,7 +1141,7 @@ // @section lcd #if EITHER(IS_ULTIPANEL, EXTENSIBLE_UI) - #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel + #define MANUAL_FEEDRATE { 60*60, 60*60, 10*60, 10*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines #if IS_ULTIPANEL #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position" @@ -1219,7 +1226,7 @@ #if HAS_DISPLAY // The timeout (in ms) to return to the status screen from sub-menus - //#define LCD_TIMEOUT_TO_STATUS 15000 + #define LCD_TIMEOUT_TO_STATUS 15000 #if ENABLED(SHOW_BOOTSCREEN) #define BOOTSCREEN_TIMEOUT 4000 // (ms) Total Duration to display the boot screen(s) @@ -1229,10 +1236,10 @@ #endif // Scroll a longer status message into view - //#define STATUS_MESSAGE_SCROLLING + #define STATUS_MESSAGE_SCROLLING // On the Info Screen, display XY with one decimal place when possible - //#define LCD_DECIMAL_SMALL_XY + #define LCD_DECIMAL_SMALL_XY // Add an 'M73' G-code to set the current percentage //#define LCD_SET_PROGRESS_MANUALLY @@ -1381,10 +1388,10 @@ //#define UTF_FILENAME_SUPPORT // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT + #define LONG_FILENAME_HOST_SUPPORT // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES + #define SCROLL_LONG_FILENAMES // Leave the heaters on after Stop Print (not recommended!) //#define SD_ABORT_NO_COOLDOWN @@ -1512,14 +1519,14 @@ */ #if HAS_MARLINUI_U8GLIB // Show SD percentage next to the progress bar - //#define DOGM_SD_PERCENT + #define DOGM_SD_PERCENT // Save many cycles by drawing a hollow frame or no frame on the Info Screen //#define XYZ_NO_FRAME - #define XYZ_HOLLOW_FRAME + //#define XYZ_HOLLOW_FRAME // Enable to save many cycles by drawing a hollow frame on Menu Screens - #define MENU_HOLLOW_FRAME + //#define MENU_HOLLOW_FRAME // A bigger font is available for edit items. Costs 3120 bytes of PROGMEM. // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. @@ -1572,7 +1579,7 @@ //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames - //#define STATUS_HEAT_PERCENT // Show heating in a progress bar + #define STATUS_HEAT_PERCENT // Show heating in a progress bar //#define BOOT_MARLIN_LOGO_ANIMATED // Animated Marlin logo. Costs ~‭3260 (or ~940) bytes of PROGMEM. // Frivolous Game Options @@ -1790,28 +1797,28 @@ * * Warning: Does not respect endstops! */ -//#define BABYSTEPPING +#define BABYSTEPPING #if ENABLED(BABYSTEPPING) //#define INTEGRATED_BABYSTEPPING // EXPERIMENTAL integration of babystepping into the Stepper ISR //#define BABYSTEP_WITHOUT_HOMING - //#define BABYSTEP_ALWAYS_AVAILABLE // Allow babystepping at all times (not just during movement). + #define BABYSTEP_ALWAYS_AVAILABLE // Allow babystepping at all times (not just during movement). //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way //#define BABYSTEP_MILLIMETER_UNITS // Specify BABYSTEP_MULTIPLICATOR_(XY|Z) in mm instead of micro-steps - #define BABYSTEP_MULTIPLICATOR_Z 1 // (steps or mm) Steps or millimeter distance for each Z babystep - #define BABYSTEP_MULTIPLICATOR_XY 1 // (steps or mm) Steps or millimeter distance for each XY babystep + #define BABYSTEP_MULTIPLICATOR_Z 25 // (steps or mm) Steps or millimeter distance for each Z babystep + #define BABYSTEP_MULTIPLICATOR_XY 25 // (steps or mm) Steps or millimeter distance for each Z babystep - //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. + #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on doubleclick when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) - #define MOVE_Z_IDLE_MULTIPLICATOR 1 // Multiply 1mm by this factor for the move step size. + #define MOVE_Z_IDLE_MULTIPLICATOR 10 // Multiply 1mm by this factor for the move step size. #endif #endif - //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 + #define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping #if ENABLED(BABYSTEP_ZPROBE_OFFSET) @@ -2311,23 +2318,23 @@ * * Enable PARK_HEAD_ON_PAUSE to add the G-code M125 Pause and Park. */ -//#define ADVANCED_PAUSE_FEATURE +#define ADVANCED_PAUSE_FEATURE #if ENABLED(ADVANCED_PAUSE_FEATURE) #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. // This short retract is done immediately, before parking the nozzle. - #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast. + #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 40 // (mm/s) Unload filament feedrate. This can be pretty fast. #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload. + #define FILAMENT_CHANGE_UNLOAD_LENGTH 820 // (mm) The length of filament for a complete unload. // For Bowden, the full length of the tube and nozzle. // For direct drive, the full length of the nozzle. // Set to 0 for manual unloading. - #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE 6 // (mm/s) Slow move when starting load. - #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 0 // (mm) Slow length, to allow time to insert material. + #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE 40 // (mm/s) Slow move when starting load. + #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 730 // (mm) Slow length, to allow time to insert material. // 0 to disable start loading and skip to fast load only #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast. #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle. + #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 75 // (mm) Load length of filament, from extruder gear to nozzle. // For Bowden, the full length of the tube and nozzle. // For direct drive, the full length of the nozzle. //#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted. @@ -2349,10 +2356,10 @@ #define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed. #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change. - //#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. + #define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. //#define HOME_BEFORE_FILAMENT_CHANGE // If needed, home before parking for filament change - //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. + #define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) #endif diff --git a/config/examples/JGAurora/A3/Configuration.h b/config/examples/JGAurora/A3/Configuration.h index 78c2dc9160..05ab1af5be 100644 --- a/config/examples/JGAurora/A3/Configuration.h +++ b/config/examples/JGAurora/A3/Configuration.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "JGAurora/A3" + /** * Configuration.h * @@ -127,7 +129,7 @@ * * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ -#define BAUDRATE 250000 +#define BAUDRATE 115200 // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH @@ -138,7 +140,7 @@ #endif // Name displayed in the LCD "Ready" message and Info menu -//#define CUSTOM_MACHINE_NAME "3D Printer" +//#define CUSTOM_MACHINE_NAME "Aurora A3" // Printer's unique ID, used by some programs to differentiate between machines. // Choose your own or use a service like https://www.uuidgenerator.net/version4 @@ -424,7 +426,7 @@ #define TEMP_SENSOR_5 0 #define TEMP_SENSOR_6 0 #define TEMP_SENSOR_7 0 -#define TEMP_SENSOR_BED 0 +#define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 #define TEMP_SENSOR_COOLER 0 @@ -472,7 +474,7 @@ // Above this temperature the heater will be switched off. // This can protect components from overheating, but NOT from shorts and failures. // (Use MINTEMP for thermistor short/failure protection.) -#define HEATER_0_MAXTEMP 275 +#define HEATER_0_MAXTEMP 260 #define HEATER_1_MAXTEMP 275 #define HEATER_2_MAXTEMP 275 #define HEATER_3_MAXTEMP 275 @@ -480,7 +482,7 @@ #define HEATER_5_MAXTEMP 275 #define HEATER_6_MAXTEMP 275 #define HEATER_7_MAXTEMP 275 -#define BED_MAXTEMP 150 +#define BED_MAXTEMP 115 #define CHAMBER_MAXTEMP 60 /** @@ -558,9 +560,9 @@ // 120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) // from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) - #define DEFAULT_bedKp 10.00 - #define DEFAULT_bedKi .023 - #define DEFAULT_bedKd 305.4 + #define DEFAULT_bedKp 344.85 + #define DEFAULT_bedKi 66.82 + #define DEFAULT_bedKd 444.95 // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. #endif // PIDTEMPBED @@ -717,13 +719,13 @@ #endif // Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define X_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_PROBE_ENDSTOP_INVERTING false // Set to true to invert the logic of the probe. +#define X_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Y_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Z_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define X_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Y_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Z_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Z_MIN_PROBE_ENDSTOP_INVERTING true // Set to true to invert the logic of the probe. /** * Stepper Drivers @@ -806,7 +808,7 @@ * Override with M92 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 500 } +#define DEFAULT_AXIS_STEPS_PER_UNIT { 98.71, 98.71, 400, 98.45 } /** * Default Max Feed Rate (mm/s) @@ -826,7 +828,7 @@ * Override with M201 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 } +#define DEFAULT_MAX_ACCELERATION { 350, 350, 100, 500 } //#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 #if ENABLED(LIMITED_MAX_ACCEL_EDITING) @@ -841,9 +843,9 @@ * M204 R Retract Acceleration * M204 T Travel Acceleration */ -#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves +#define DEFAULT_ACCELERATION 300 // X, Y, Z and E acceleration for printing moves +#define DEFAULT_RETRACT_ACCELERATION 500 // E acceleration for retracts +#define DEFAULT_TRAVEL_ACCELERATION 700 // X, Y, Z acceleration for travel (non printing) moves /** * Default Jerk limits (mm/s) @@ -1197,7 +1199,7 @@ // @section extruder // For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR false +#define INVERT_E0_DIR true #define INVERT_E1_DIR false #define INVERT_E2_DIR false #define INVERT_E3_DIR false @@ -1236,12 +1238,12 @@ #define Y_BED_SIZE 200 // Travel limits (mm) after homing, corresponding to endstop positions. -#define X_MIN_POS 0 -#define Y_MIN_POS 0 +#define X_MIN_POS -33 +#define Y_MIN_POS -25 #define Z_MIN_POS 0 #define X_MAX_POS X_BED_SIZE #define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 200 +#define Z_MAX_POS 180 /** * Software Endstops @@ -1672,7 +1674,7 @@ * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) */ -//#define EEPROM_SETTINGS // Persistent storage with M500 and M501 +#define EEPROM_SETTINGS // Persistent storage with M500 and M501 //#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. #define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load @@ -1706,8 +1708,8 @@ // Preheat Constants - Up to 5 are supported without changes // #define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 180 -#define PREHEAT_1_TEMP_BED 70 +#define PREHEAT_1_TEMP_HOTEND 200 +#define PREHEAT_1_TEMP_BED 60 #define PREHEAT_1_TEMP_CHAMBER 35 #define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 @@ -1845,7 +1847,7 @@ * * View the current statistics with M78. */ -//#define PRINTCOUNTER +#define PRINTCOUNTER #if ENABLED(PRINTCOUNTER) #define PRINTCOUNTER_SAVE_INTERVAL 60 // (minutes) EEPROM save interval during print #endif @@ -1936,7 +1938,7 @@ * SD Card support is disabled by default. If your controller has an SD slot, * you must uncomment the following option or it won't work. */ -//#define SDSUPPORT +#define SDSUPPORT /** * SD CARD: ENABLE CRC @@ -1960,13 +1962,13 @@ // This option overrides the default number of encoder pulses needed to // produce one step. Should be increased for high-resolution encoders. // -//#define ENCODER_PULSES_PER_STEP 4 +#define ENCODER_PULSES_PER_STEP 5 // // Use this option to override the number of step signals required to // move between next/prev menu items. // -//#define ENCODER_STEPS_PER_MENU_ITEM 1 +#define ENCODER_STEPS_PER_MENU_ITEM 1 /** * Encoder Direction Options @@ -2014,7 +2016,7 @@ // If you have a speaker that can produce tones, enable it here. // By default Marlin assumes you have a buzzer with a fixed frequency. // -//#define SPEAKER +#define SPEAKER // // The duration and frequency for the UI feedback sound. @@ -2023,8 +2025,8 @@ // Note: Test audio output with the G-Code: // M300 S P // -//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 -//#define LCD_FEEDBACK_FREQUENCY_HZ 5000 +#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 0 +#define LCD_FEEDBACK_FREQUENCY_HZ 0 //============================================================================= //======================== LCD / Controller Selection ========================= @@ -2037,7 +2039,7 @@ // // Note: Usually sold with a white PCB. // -//#define REPRAP_DISCOUNT_SMART_CONTROLLER +#define REPRAP_DISCOUNT_SMART_CONTROLLER // // GT2560 (YHCB2004) LCD Display diff --git a/config/examples/JGAurora/A5/Configuration.h b/config/examples/JGAurora/A5/Configuration.h index 78c2dc9160..36549dc291 100644 --- a/config/examples/JGAurora/A5/Configuration.h +++ b/config/examples/JGAurora/A5/Configuration.h @@ -21,6 +21,13 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "JGAurora/A5" + +/** + * JGAurora A5 configuration + * Authors: Telli Mantelli, Kris Waclawski, Michael Gilardi & Samuel Pinches + */ + /** * Configuration.h * @@ -69,7 +76,7 @@ // @section info // Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes. +#define STRING_CONFIG_H_AUTHOR "(Telli Mantelli, Kris Waclawski, Samuel Pinches & Michael Gilardi, 21 Jan 2018)" // Who made the changes. //#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) /** @@ -134,11 +141,11 @@ // Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_RAMPS_14_EFB + #define MOTHERBOARD BOARD_MKS_GEN_L #endif // Name displayed in the LCD "Ready" message and Info menu -//#define CUSTOM_MACHINE_NAME "3D Printer" +#define CUSTOM_MACHINE_NAME "JGAurora A5" // Printer's unique ID, used by some programs to differentiate between machines. // Choose your own or use a service like https://www.uuidgenerator.net/version4 @@ -416,7 +423,7 @@ * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. */ -#define TEMP_SENSOR_0 1 +#define TEMP_SENSOR_0 15 // manual calibration of thermistor in JGAurora A5 hotend #define TEMP_SENSOR_1 0 #define TEMP_SENSOR_2 0 #define TEMP_SENSOR_3 0 @@ -424,7 +431,7 @@ #define TEMP_SENSOR_5 0 #define TEMP_SENSOR_6 0 #define TEMP_SENSOR_7 0 -#define TEMP_SENSOR_BED 0 +#define TEMP_SENSOR_BED 1 // measured to be satisfactorily accurate on center of bed within +/- 1 degC. #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 #define TEMP_SENSOR_COOLER 0 @@ -472,7 +479,7 @@ // Above this temperature the heater will be switched off. // This can protect components from overheating, but NOT from shorts and failures. // (Use MINTEMP for thermistor short/failure protection.) -#define HEATER_0_MAXTEMP 275 +#define HEATER_0_MAXTEMP 265 #define HEATER_1_MAXTEMP 275 #define HEATER_2_MAXTEMP 275 #define HEATER_3_MAXTEMP 275 @@ -480,7 +487,7 @@ #define HEATER_5_MAXTEMP 275 #define HEATER_6_MAXTEMP 275 #define HEATER_7_MAXTEMP 275 -#define BED_MAXTEMP 150 +#define BED_MAXTEMP 120 #define CHAMBER_MAXTEMP 60 /** @@ -505,21 +512,22 @@ #define PID_K1 0.95 // Smoothing factor within any PID loop #if ENABLED(PIDTEMP) - //#define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) - //#define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) + #define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) + #define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) // Set/get with gcode: M301 E[extruder number, 0-2] + // JGAurora A5 (tuned at 210C) #if ENABLED(PID_PARAMS_PER_HOTEND) // Specify between 1 and HOTENDS values per array. // If fewer than EXTRUDER values are provided, the last element will be repeated. - #define DEFAULT_Kp_LIST { 22.20, 22.20 } - #define DEFAULT_Ki_LIST { 1.08, 1.08 } - #define DEFAULT_Kd_LIST { 114.00, 114.00 } + #define DEFAULT_Kp_LIST { 35.30, 35.30 } + #define DEFAULT_Ki_LIST { 4.35, 4.35 } + #define DEFAULT_Kd_LIST { 71.57, 71.57 } #else - #define DEFAULT_Kp 22.20 - #define DEFAULT_Ki 1.08 - #define DEFAULT_Kd 114.00 + #define DEFAULT_Kp 35.30 + #define DEFAULT_Ki 4.35 + #define DEFAULT_Kd 71.57 #endif #endif // PIDTEMP @@ -558,6 +566,8 @@ // 120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) // from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) + + // JGAurora A5 (tuned at 70C) #define DEFAULT_bedKp 10.00 #define DEFAULT_bedKi .023 #define DEFAULT_bedKd 305.4 @@ -634,7 +644,7 @@ * Note: For Bowden Extruders make this large enough to allow load/unload. */ #define PREVENT_LENGTHY_EXTRUDE -#define EXTRUDE_MAXLENGTH 200 +#define EXTRUDE_MAXLENGTH 1000 //=========================================================================== //======================== Thermal Runaway Protection ======================= @@ -717,9 +727,9 @@ #endif // Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. +#define X_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Y_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Z_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. #define X_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. #define Y_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. #define Z_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. @@ -806,14 +816,14 @@ * Override with M92 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 500 } +#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 800, 100 } /** * Default Max Feed Rate (mm/s) * Override with M203 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 } +#define DEFAULT_MAX_FEEDRATE { 500, 500, 15, 25 } //#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 #if ENABLED(LIMITED_MAX_FR_EDITING) @@ -826,7 +836,7 @@ * Override with M201 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 } +#define DEFAULT_MAX_ACCELERATION { 1000, 500, 100, 5000 } //#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 #if ENABLED(LIMITED_MAX_ACCEL_EDITING) @@ -841,9 +851,9 @@ * M204 R Retract Acceleration * M204 T Travel Acceleration */ -#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves +#define DEFAULT_ACCELERATION 800 // X, Y, Z and E acceleration for printing moves +#define DEFAULT_RETRACT_ACCELERATION 800 // E acceleration for retracts +#define DEFAULT_TRAVEL_ACCELERATION 1000 // X, Y, Z acceleration for travel (non printing) moves /** * Default Jerk limits (mm/s) @@ -855,8 +865,8 @@ */ //#define CLASSIC_JERK #if ENABLED(CLASSIC_JERK) - #define DEFAULT_XJERK 10.0 - #define DEFAULT_YJERK 10.0 + #define DEFAULT_XJERK 8.0 + #define DEFAULT_YJERK 3.0 #define DEFAULT_ZJERK 0.3 //#define TRAVEL_EXTRA_XYJERK 0.0 // Additional jerk allowance for all travel moves @@ -877,7 +887,7 @@ * https://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html */ #if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.013 // (mm) Distance from real junction edge + #define JUNCTION_DEVIATION_MM 0.005 // (mm) Distance from real junction edge #define JD_HANDLE_SMALL_SEGMENTS // Use curvature estimation instead of just the junction angle // for small segments (< 1mm) with large junction angles (> 135°). #endif @@ -1065,7 +1075,7 @@ #define XY_PROBE_FEEDRATE (133*60) // Feedrate (mm/min) for the first approach when double-probing (MULTIPLE_PROBING == 2) -#define Z_PROBE_FEEDRATE_FAST (4*60) +#define Z_PROBE_FEEDRATE_FAST (12*60) // Feedrate (mm/min) for the "accurate" probe of each point #define Z_PROBE_FEEDRATE_SLOW (Z_PROBE_FEEDRATE_FAST / 2) @@ -1190,14 +1200,14 @@ // @section machine // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR false -#define INVERT_Y_DIR true +#define INVERT_X_DIR true +#define INVERT_Y_DIR false #define INVERT_Z_DIR false // @section extruder // For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR false +#define INVERT_E0_DIR true #define INVERT_E1_DIR false #define INVERT_E2_DIR false #define INVERT_E3_DIR false @@ -1232,16 +1242,16 @@ // @section machine // The size of the printable area -#define X_BED_SIZE 200 -#define Y_BED_SIZE 200 +#define X_BED_SIZE 305 +#define Y_BED_SIZE 305 // Travel limits (mm) after homing, corresponding to endstop positions. -#define X_MIN_POS 0 +#define X_MIN_POS -5 // thanks DaHai. #define Y_MIN_POS 0 #define Z_MIN_POS 0 #define X_MAX_POS X_BED_SIZE #define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 200 +#define Z_MAX_POS 320 /** * Software Endstops @@ -1285,7 +1295,7 @@ * RAMPS-based boards use SERVO3_PIN for the first runout sensor. * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. */ -//#define FILAMENT_RUNOUT_SENSOR +#define FILAMENT_RUNOUT_SENSOR #if ENABLED(FILAMENT_RUNOUT_SENSOR) #define FIL_RUNOUT_ENABLED_DEFAULT true // Enable the sensor on startup. Override with M412 followed by M500. #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. @@ -1389,7 +1399,7 @@ //#define AUTO_BED_LEVELING_LINEAR //#define AUTO_BED_LEVELING_BILINEAR //#define AUTO_BED_LEVELING_UBL -//#define MESH_BED_LEVELING +#define MESH_BED_LEVELING /** * Normally G28 leaves leveling disabled on completion. Enable one of @@ -1438,12 +1448,12 @@ /** * Enable the G26 Mesh Validation Pattern tool. */ - //#define G26_MESH_VALIDATION + #define G26_MESH_VALIDATION #if ENABLED(G26_MESH_VALIDATION) #define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle. #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for G26. #define MESH_TEST_HOTEND_TEMP 205 // (°C) Default nozzle temperature for G26. - #define MESH_TEST_BED_TEMP 60 // (°C) Default bed temperature for G26. + #define MESH_TEST_BED_TEMP 60 // (°C) Defaultbed temperature for G26. #define G26_XY_FEEDRATE 20 // (mm/s) Feedrate for G26 XY moves. #define G26_XY_FEEDRATE_TRAVEL 100 // (mm/s) Feedrate for G26 XY travel moves. #define G26_RETRACT_MULTIPLIER 1.0 // G26 Q (retraction) used by default between mesh test elements. @@ -1454,7 +1464,7 @@ #if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR) // Set the number of grid points per dimension. - #define GRID_MAX_POINTS_X 3 + #define GRID_MAX_POINTS_X 5 #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X // Probe along the Y axis, advancing X after each column @@ -1507,10 +1517,10 @@ //=========================================================================== #define MESH_INSET 10 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 3 // Don't use more than 7 points per axis, implementation limited. + #define GRID_MAX_POINTS_X 5 // As suggested by DaHai, https://www.youtube.com/watch?v=CBlADPgQqL0 #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS + #define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS #endif // BED_LEVELING @@ -1527,7 +1537,7 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS +#define LEVEL_BED_CORNERS #if ENABLED(LEVEL_BED_CORNERS) #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets @@ -1595,7 +1605,7 @@ #endif // Homing speeds (mm/min) -#define HOMING_FEEDRATE_MM_M { (50*60), (50*60), (4*60) } +#define HOMING_FEEDRATE_MM_M { (80*60), (80*60), (12*60) } // Validate that endstops are triggered on homing moves #define VALIDATE_HOMING_ENDSTOPS @@ -1672,8 +1682,8 @@ * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) */ -//#define EEPROM_SETTINGS // Persistent storage with M500 and M501 -//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! +#define EEPROM_SETTINGS // Persistent storage with M500 and M501 +#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. #define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load #if ENABLED(EEPROM_SETTINGS) @@ -1706,10 +1716,10 @@ // Preheat Constants - Up to 5 are supported without changes // #define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 180 +#define PREHEAT_1_TEMP_HOTEND 205 #define PREHEAT_1_TEMP_BED 70 #define PREHEAT_1_TEMP_CHAMBER 35 -#define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 +#define PREHEAT_1_FAN_SPEED 255 // Value from 0 to 255 #define PREHEAT_2_LABEL "ABS" #define PREHEAT_2_TEMP_HOTEND 240 @@ -1728,7 +1738,7 @@ * P1 Raise the nozzle always to Z-park height. * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. */ -//#define NOZZLE_PARK_FEATURE +#define NOZZLE_PARK_FEATURE #if ENABLED(NOZZLE_PARK_FEATURE) // Specify a park position as { X, Y, Z_raise } @@ -1845,7 +1855,7 @@ * * View the current statistics with M78. */ -//#define PRINTCOUNTER +#define PRINTCOUNTER #if ENABLED(PRINTCOUNTER) #define PRINTCOUNTER_SAVE_INTERVAL 60 // (minutes) EEPROM save interval during print #endif @@ -1936,7 +1946,7 @@ * SD Card support is disabled by default. If your controller has an SD slot, * you must uncomment the following option or it won't work. */ -//#define SDSUPPORT +#define SDSUPPORT /** * SD CARD: ENABLE CRC @@ -2014,7 +2024,7 @@ // If you have a speaker that can produce tones, enable it here. // By default Marlin assumes you have a buzzer with a fixed frequency. // -//#define SPEAKER +#define SPEAKER // // The duration and frequency for the UI feedback sound. diff --git a/config/examples/JGAurora/A5/Configuration_adv.h b/config/examples/JGAurora/A5/Configuration_adv.h index 5335fa012a..3d379f694b 100644 --- a/config/examples/JGAurora/A5/Configuration_adv.h +++ b/config/examples/JGAurora/A5/Configuration_adv.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "JGAurora/A5" + /** * Configuration_adv.h * @@ -272,7 +274,7 @@ /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds + #define WATCH_BED_TEMP_PERIOD 90 // Seconds #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius #endif @@ -737,11 +739,11 @@ //#define SENSORLESS_BACKOFF_MM { 2, 2 } // (mm) Backoff from endstops before sensorless homing #define HOMING_BUMP_MM { 5, 5, 2 } // (mm) Backoff from endstops after first bump -#define HOMING_BUMP_DIVISOR { 2, 2, 4 } // Re-Bump Speed Divisor (Divides the Homing Feedrate) +#define HOMING_BUMP_DIVISOR { 10, 10, 6 } // Re-Bump Speed Divisor (Divides the Homing Feedrate) //#define HOMING_BACKOFF_POST_MM { 2, 2, 2 } // (mm) Backoff from endstops after homing -//#define QUICK_HOME // If G28 contains XY do a diagonal move first +#define QUICK_HOME // If G28 contains XY do a diagonal move first //#define HOME_Y_BEFORE_X // If G28 contains XY home Y before X //#define HOME_Z_FIRST // Home Z first. Requires a Z-MIN endstop (not a probe). //#define CODEPENDENT_XY_HOMING // If X/Y can't home without homing Y/X first @@ -867,7 +869,7 @@ // On a 300mm bed a 5% grade would give a misalignment of ~1.5cm #define G34_MAX_GRADE 5 // (%) Maximum incline that G34 will handle - #define Z_STEPPER_ALIGN_ITERATIONS 5 // Number of iterations to apply during alignment + #define Z_STEPPER_ALIGN_ITERATIONS 3 // Number of iterations to apply during alignment #define Z_STEPPER_ALIGN_ACC 0.02 // Stop iterating early if the accuracy is better than this #define RESTORE_LEVELING_AFTER_G34 // Restore leveling after G34 is done? // After G34, re-home Z (G28 Z) or just calculate it from the last probe heights? @@ -1134,7 +1136,7 @@ // @section lcd #if EITHER(IS_ULTIPANEL, EXTENSIBLE_UI) - #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel + #define MANUAL_FEEDRATE { 80*60, 80*60, 12*60, 60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines #if IS_ULTIPANEL #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position" @@ -1301,7 +1303,7 @@ //#define BROWSE_MEDIA_ON_INSERT // Open the file browser when media is inserted - #define EVENT_GCODE_SD_ABORT "G28XY" // G-code to run on SD Abort Print (e.g., "G28XY" or "G27") + #define EVENT_GCODE_SD_ABORT "G27" // G-code to run on SD Abort Print (e.g., "G28XY" or "G27") #if ENABLED(PRINTER_EVENT_LEDS) #define PE_LEDS_COMPLETED_TIME (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination @@ -1790,7 +1792,7 @@ * * Warning: Does not respect endstops! */ -//#define BABYSTEPPING +#define BABYSTEPPING #if ENABLED(BABYSTEPPING) //#define INTEGRATED_BABYSTEPPING // EXPERIMENTAL integration of babystepping into the Stepper ISR //#define BABYSTEP_WITHOUT_HOMING @@ -1798,10 +1800,10 @@ //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way //#define BABYSTEP_MILLIMETER_UNITS // Specify BABYSTEP_MULTIPLICATOR_(XY|Z) in mm instead of micro-steps - #define BABYSTEP_MULTIPLICATOR_Z 1 // (steps or mm) Steps or millimeter distance for each Z babystep - #define BABYSTEP_MULTIPLICATOR_XY 1 // (steps or mm) Steps or millimeter distance for each XY babystep + #define BABYSTEP_MULTIPLICATOR_Z 5 // (steps or mm) Steps or millimeter distance for each Z babystep + #define BABYSTEP_MULTIPLICATOR_XY 5 // (steps or mm) Steps or millimeter distance for each XY babystep - //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. + #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. // Note: Extra time may be added to mitigate controller latency. @@ -1982,7 +1984,7 @@ // // G2/G3 Arc Support // -#define ARC_SUPPORT // Disable this feature to save ~3226 bytes +//#define ARC_SUPPORT // Disable this feature to save ~3226 bytes #if ENABLED(ARC_SUPPORT) #define MM_PER_ARC_SEGMENT 1 // (mm) Length (or minimum length) of each arc segment //#define ARC_SEGMENTS_PER_R 1 // Max segment length, MM_PER = Min @@ -2141,7 +2143,7 @@ * Currently handles M108, M112, M410, M876 * NOTE: Not yet implemented for all platforms. */ -//#define EMERGENCY_PARSER +#define EMERGENCY_PARSER /** * Realtime Reporting (requires EMERGENCY_PARSER) @@ -2311,7 +2313,7 @@ * * Enable PARK_HEAD_ON_PAUSE to add the G-code M125 Pause and Park. */ -//#define ADVANCED_PAUSE_FEATURE +#define ADVANCED_PAUSE_FEATURE #if ENABLED(ADVANCED_PAUSE_FEATURE) #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. @@ -2346,11 +2348,11 @@ #define FILAMENT_UNLOAD_PURGE_FEEDRATE 25 // (mm/s) feedrate to purge before unload #define PAUSE_PARK_NOZZLE_TIMEOUT 45 // (seconds) Time limit before the nozzle is turned off for safety. - #define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed. + #define FILAMENT_CHANGE_ALERT_BEEPS 6 // Number of alert beeps to play when a response is needed. #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change. - //#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. - //#define HOME_BEFORE_FILAMENT_CHANGE // If needed, home before parking for filament change + #define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. + #define HOME_BEFORE_FILAMENT_CHANGE // If needed, home before parking for filament change //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) diff --git a/config/examples/JGAurora/A5S/Configuration.h b/config/examples/JGAurora/A5S/Configuration.h index 78c2dc9160..427d5776bd 100644 --- a/config/examples/JGAurora/A5S/Configuration.h +++ b/config/examples/JGAurora/A5S/Configuration.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "JGAurora/A5S" + /** * Configuration.h * @@ -69,7 +71,8 @@ // @section info // Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes. + +#define STRING_CONFIG_H_AUTHOR "(Roberto Mariani & Samuel Pinches)" // Who made the changes. //#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) /** @@ -102,7 +105,7 @@ * * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] */ -#define SERIAL_PORT 0 +#define SERIAL_PORT 1 /** * Select a secondary serial port on the board to use for communication with the host. @@ -134,11 +137,11 @@ // Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_RAMPS_14_EFB + #define MOTHERBOARD BOARD_JGAURORA_A5S_A1 #endif // Name displayed in the LCD "Ready" message and Info menu -//#define CUSTOM_MACHINE_NAME "3D Printer" +#define CUSTOM_MACHINE_NAME "JGAurora A5S" // Printer's unique ID, used by some programs to differentiate between machines. // Choose your own or use a service like https://www.uuidgenerator.net/version4 @@ -424,7 +427,7 @@ #define TEMP_SENSOR_5 0 #define TEMP_SENSOR_6 0 #define TEMP_SENSOR_7 0 -#define TEMP_SENSOR_BED 0 +#define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 #define TEMP_SENSOR_COOLER 0 @@ -505,21 +508,22 @@ #define PID_K1 0.95 // Smoothing factor within any PID loop #if ENABLED(PIDTEMP) - //#define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) - //#define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) + #define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) + #define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) // Set/get with gcode: M301 E[extruder number, 0-2] + // Tuned by Sam Pinches 18th March 2019, on A5S at 220C. #if ENABLED(PID_PARAMS_PER_HOTEND) // Specify between 1 and HOTENDS values per array. // If fewer than EXTRUDER values are provided, the last element will be repeated. - #define DEFAULT_Kp_LIST { 22.20, 22.20 } - #define DEFAULT_Ki_LIST { 1.08, 1.08 } - #define DEFAULT_Kd_LIST { 114.00, 114.00 } + #define DEFAULT_Kp_LIST { 32.73, 32.73 } + #define DEFAULT_Ki_LIST { 3.68, 3.68 } + #define DEFAULT_Kd_LIST { 72.83, 72.83 } #else - #define DEFAULT_Kp 22.20 - #define DEFAULT_Ki 1.08 - #define DEFAULT_Kd 114.00 + #define DEFAULT_Kp 32.73 + #define DEFAULT_Ki 3.68 + #define DEFAULT_Kd 72.83 #endif #endif // PIDTEMP @@ -540,7 +544,7 @@ * heater. If your configuration is significantly different than this and you don't understand * the issues involved, don't use bed PID until someone else verifies that your hardware works. */ -//#define PIDTEMPBED +#define PIDTEMPBED //#define BED_LIMIT_SWITCHING @@ -558,9 +562,11 @@ // 120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) // from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) - #define DEFAULT_bedKp 10.00 - #define DEFAULT_bedKi .023 - #define DEFAULT_bedKd 305.4 + + // Tuned by Sam Pinches on A5S at 75C (18th March, 2019) + #define DEFAULT_bedKp 175.83 + #define DEFAULT_bedKi 28.85 + #define DEFAULT_bedKd 267.90 // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. #endif // PIDTEMPBED @@ -634,7 +640,7 @@ * Note: For Bowden Extruders make this large enough to allow load/unload. */ #define PREVENT_LENGTHY_EXTRUDE -#define EXTRUDE_MAXLENGTH 200 +#define EXTRUDE_MAXLENGTH 1000 //=========================================================================== //======================== Thermal Runaway Protection ======================= @@ -717,12 +723,12 @@ #endif // Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define X_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. +#define X_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Y_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Z_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define X_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Y_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Z_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. #define Z_MIN_PROBE_ENDSTOP_INVERTING false // Set to true to invert the logic of the probe. /** @@ -806,14 +812,14 @@ * Override with M92 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 500 } +#define DEFAULT_AXIS_STEPS_PER_UNIT { 160, 160, 1600, 202 } /** * Default Max Feed Rate (mm/s) * Override with M203 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 } +#define DEFAULT_MAX_FEEDRATE { 360, 150, 30, 40 } //#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 #if ENABLED(LIMITED_MAX_FR_EDITING) @@ -826,7 +832,7 @@ * Override with M201 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 } +#define DEFAULT_MAX_ACCELERATION { 1200, 350, 100, 500 } //#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 #if ENABLED(LIMITED_MAX_ACCEL_EDITING) @@ -841,9 +847,9 @@ * M204 R Retract Acceleration * M204 T Travel Acceleration */ -#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves +#define DEFAULT_ACCELERATION 500 // X, Y, Z and E acceleration for printing moves +#define DEFAULT_RETRACT_ACCELERATION 500 // E acceleration for retracts +#define DEFAULT_TRAVEL_ACCELERATION 500 // X, Y, Z acceleration for travel (non printing) moves /** * Default Jerk limits (mm/s) @@ -855,9 +861,9 @@ */ //#define CLASSIC_JERK #if ENABLED(CLASSIC_JERK) - #define DEFAULT_XJERK 10.0 - #define DEFAULT_YJERK 10.0 - #define DEFAULT_ZJERK 0.3 + #define DEFAULT_XJERK 13.0 + #define DEFAULT_YJERK 5.0 + #define DEFAULT_ZJERK 0.4 //#define TRAVEL_EXTRA_XYJERK 0.0 // Additional jerk allowance for all travel moves @@ -877,7 +883,7 @@ * https://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html */ #if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.013 // (mm) Distance from real junction edge + #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge #define JD_HANDLE_SMALL_SEGMENTS // Use curvature estimation instead of just the junction angle // for small segments (< 1mm) with large junction angles (> 135°). #endif @@ -890,7 +896,7 @@ * * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained */ -//#define S_CURVE_ACCELERATION +#define S_CURVE_ACCELERATION //=========================================================================== //============================= Z Probe Options ============================= @@ -1065,10 +1071,10 @@ #define XY_PROBE_FEEDRATE (133*60) // Feedrate (mm/min) for the first approach when double-probing (MULTIPLE_PROBING == 2) -#define Z_PROBE_FEEDRATE_FAST (4*60) +#define Z_PROBE_FEEDRATE_FAST (12*60) // Feedrate (mm/min) for the "accurate" probe of each point -#define Z_PROBE_FEEDRATE_SLOW (Z_PROBE_FEEDRATE_FAST / 2) +#define Z_PROBE_FEEDRATE_SLOW (Z_PROBE_FEEDRATE_FAST / 4) /** * Probe Activation Switch @@ -1190,15 +1196,15 @@ // @section machine // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR false -#define INVERT_Y_DIR true +#define INVERT_X_DIR true +#define INVERT_Y_DIR false #define INVERT_Z_DIR false // @section extruder // For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR false -#define INVERT_E1_DIR false +#define INVERT_E0_DIR true +#define INVERT_E1_DIR true #define INVERT_E2_DIR false #define INVERT_E3_DIR false #define INVERT_E4_DIR false @@ -1232,8 +1238,8 @@ // @section machine // The size of the printable area -#define X_BED_SIZE 200 -#define Y_BED_SIZE 200 +#define X_BED_SIZE 310 +#define Y_BED_SIZE 310 // Travel limits (mm) after homing, corresponding to endstop positions. #define X_MIN_POS 0 @@ -1241,7 +1247,7 @@ #define Z_MIN_POS 0 #define X_MAX_POS X_BED_SIZE #define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 200 +#define Z_MAX_POS 330 /** * Software Endstops @@ -1389,14 +1395,14 @@ //#define AUTO_BED_LEVELING_LINEAR //#define AUTO_BED_LEVELING_BILINEAR //#define AUTO_BED_LEVELING_UBL -//#define MESH_BED_LEVELING +#define MESH_BED_LEVELING /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable * leveling immediately after G28. */ -//#define RESTORE_LEVELING_AFTER_G28 +#define RESTORE_LEVELING_AFTER_G28 //#define ENABLE_LEVELING_AFTER_G28 /** @@ -1438,7 +1444,7 @@ /** * Enable the G26 Mesh Validation Pattern tool. */ - //#define G26_MESH_VALIDATION + #define G26_MESH_VALIDATION #if ENABLED(G26_MESH_VALIDATION) #define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle. #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for G26. @@ -1484,7 +1490,7 @@ //========================= Unified Bed Leveling ============================ //=========================================================================== - //#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh + #define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh #define MESH_INSET 1 // Set Mesh bounds as an inset region of the bed #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. @@ -1507,7 +1513,7 @@ //=========================================================================== #define MESH_INSET 10 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 3 // Don't use more than 7 points per axis, implementation limited. + #define GRID_MAX_POINTS_X 5 // Don't use more than 7 points per axis, implementation limited. #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS @@ -1518,21 +1524,21 @@ * Add a bed leveling sub-menu for ABL or MBL. * Include a guided procedure if manual probing is enabled. */ -//#define LCD_BED_LEVELING +#define LCD_BED_LEVELING #if ENABLED(LCD_BED_LEVELING) #define MESH_EDIT_Z_STEP 0.025 // (mm) Step size while manually probing Z axis. #define LCD_PROBE_Z_RANGE 4 // (mm) Z Range centered on Z_MIN_POS for LCD Z adjustment - //#define MESH_EDIT_MENU // Add a menu to edit mesh points + #define MESH_EDIT_MENU // Add a menu to edit mesh points #endif // Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS +#define LEVEL_BED_CORNERS #if ENABLED(LEVEL_BED_CORNERS) #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define LEVEL_CORNERS_Z_HOP 5.0 // (mm) Z height of nozzle between leveling points //#define LEVEL_CENTER_TOO // Move to the center after the last corner //#define LEVEL_CORNERS_USE_PROBE #if ENABLED(LEVEL_CORNERS_USE_PROBE) @@ -1574,9 +1580,9 @@ // Manually set the home position. Leave these undefined for automatic settings. // For DELTA this is the top-center of the Cartesian print volume. -//#define MANUAL_X_HOME_POS 0 -//#define MANUAL_Y_HOME_POS 0 -//#define MANUAL_Z_HOME_POS 0 +#define MANUAL_X_HOME_POS -6 +#define MANUAL_Y_HOME_POS 0 +#define MANUAL_Z_HOME_POS 0 // Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area. // @@ -1595,7 +1601,7 @@ #endif // Homing speeds (mm/min) -#define HOMING_FEEDRATE_MM_M { (50*60), (50*60), (4*60) } +#define HOMING_FEEDRATE_MM_M { (90*60), (90*60), (12*60) } // Validate that endstops are triggered on homing moves #define VALIDATE_HOMING_ENDSTOPS @@ -1672,12 +1678,12 @@ * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) */ -//#define EEPROM_SETTINGS // Persistent storage with M500 and M501 +#define EEPROM_SETTINGS // Persistent storage with M500 and M501 //#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. #define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load #if ENABLED(EEPROM_SETTINGS) - //#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. + #define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. #endif // @@ -1706,14 +1712,14 @@ // Preheat Constants - Up to 5 are supported without changes // #define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 180 -#define PREHEAT_1_TEMP_BED 70 +#define PREHEAT_1_TEMP_HOTEND 205 +#define PREHEAT_1_TEMP_BED 58 #define PREHEAT_1_TEMP_CHAMBER 35 -#define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 +#define PREHEAT_1_FAN_SPEED 255 // Value from 0 to 255 #define PREHEAT_2_LABEL "ABS" -#define PREHEAT_2_TEMP_HOTEND 240 -#define PREHEAT_2_TEMP_BED 110 +#define PREHEAT_2_TEMP_HOTEND 245 +#define PREHEAT_2_TEMP_BED 105 #define PREHEAT_2_TEMP_CHAMBER 35 #define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 @@ -1728,7 +1734,7 @@ * P1 Raise the nozzle always to Z-park height. * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. */ -//#define NOZZLE_PARK_FEATURE +#define NOZZLE_PARK_FEATURE #if ENABLED(NOZZLE_PARK_FEATURE) // Specify a park position as { X, Y, Z_raise } @@ -1936,7 +1942,8 @@ * SD Card support is disabled by default. If your controller has an SD slot, * you must uncomment the following option or it won't work. */ -//#define SDSUPPORT +#define SDSUPPORT +#define SDIO_SUPPORT /** * SD CARD: ENABLE CRC @@ -1960,13 +1967,13 @@ // This option overrides the default number of encoder pulses needed to // produce one step. Should be increased for high-resolution encoders. // -//#define ENCODER_PULSES_PER_STEP 4 +//#define ENCODER_PULSES_PER_STEP 2 // // Use this option to override the number of step signals required to // move between next/prev menu items. // -//#define ENCODER_STEPS_PER_MENU_ITEM 1 +//#define ENCODER_STEPS_PER_MENU_ITEM 2 /** * Encoder Direction Options @@ -1991,7 +1998,7 @@ // If CLOCKWISE normally moves DOWN this makes it go UP. // If CLOCKWISE normally moves UP this makes it go DOWN. // -//#define REVERSE_MENU_DIRECTION +#define REVERSE_MENU_DIRECTION // // This option reverses the encoder direction for Select Screen. @@ -2518,17 +2525,17 @@ // // Generic TFT with detailed options // -//#define TFT_GENERIC +#define TFT_GENERIC #if ENABLED(TFT_GENERIC) // :[ 'AUTO', 'ST7735', 'ST7789', 'ST7796', 'R61505', 'ILI9328', 'ILI9341', 'ILI9488' ] #define TFT_DRIVER AUTO // Interface. Enable one of the following options: - //#define TFT_INTERFACE_FSMC + #define TFT_INTERFACE_FSMC //#define TFT_INTERFACE_SPI // TFT Resolution. Enable one of the following options: - //#define TFT_RES_320x240 + #define TFT_RES_320x240 //#define TFT_RES_480x272 //#define TFT_RES_480x320 #endif @@ -2543,7 +2550,7 @@ * For LVGL_UI also copy the 'assets' folder from the build directory to the * root of your SD card, together with the compiled firmware. */ -//#define TFT_CLASSIC_UI +#define TFT_CLASSIC_UI //#define TFT_COLOR_UI //#define TFT_LVGL_UI @@ -2573,22 +2580,20 @@ // // Touch Screen Settings // -//#define TOUCH_SCREEN +#define TOUCH_SCREEN #if ENABLED(TOUCH_SCREEN) - #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens - #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus + #define BUTTON_DELAY_EDIT 75 // (ms) Button repeat delay for edit screens + #define BUTTON_DELAY_MENU 100 // (ms) Button repeat delay for menus #define TOUCH_SCREEN_CALIBRATION - //#define TOUCH_CALIBRATION_X 12316 - //#define TOUCH_CALIBRATION_Y -8981 - //#define TOUCH_OFFSET_X -43 - //#define TOUCH_OFFSET_Y 257 + #define TOUCH_CALIBRATION_X 12316 + #define TOUCH_CALIBRATION_Y -8981 + #define TOUCH_OFFSET_X -43 + #define TOUCH_OFFSET_Y 257 //#define TOUCH_ORIENTATION TOUCH_LANDSCAPE - #if BOTH(TOUCH_SCREEN_CALIBRATION, EEPROM_SETTINGS) - #define TOUCH_CALIBRATION_AUTO_SAVE // Auto save successful calibration values to EEPROM - #endif + #define XPT2046_Z1_THRESHOLD 1 #if ENABLED(TFT_COLOR_UI) //#define SINGLE_TOUCH_NAVIGATION @@ -2618,7 +2623,7 @@ // Use software PWM to drive the fan, as for the heaters. This uses a very low frequency // which is not as annoying as with the hardware PWM. On the other hand, if this frequency // is too low, you should also increment SOFT_PWM_SCALE. -//#define FAN_SOFT_PWM +#define FAN_SOFT_PWM // Incrementing this by 1 will double the software PWM frequency, // affecting heaters, and the fan if FAN_SOFT_PWM is enabled. @@ -2675,10 +2680,10 @@ //#define RGBW_LED #if EITHER(RGB_LED, RGBW_LED) - //#define RGB_LED_R_PIN 34 - //#define RGB_LED_G_PIN 43 - //#define RGB_LED_B_PIN 35 - //#define RGB_LED_W_PIN -1 + #define RGB_LED_R_PIN 34 + #define RGB_LED_G_PIN 43 + #define RGB_LED_B_PIN 35 + #define RGB_LED_W_PIN -1 #endif // Support for Adafruit NeoPixel LED driver diff --git a/config/examples/JGAurora/A5S/Configuration_adv.h b/config/examples/JGAurora/A5S/Configuration_adv.h index 5335fa012a..bb85b6c3cd 100644 --- a/config/examples/JGAurora/A5S/Configuration_adv.h +++ b/config/examples/JGAurora/A5S/Configuration_adv.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "JGAurora/A5S" + /** * Configuration_adv.h * @@ -113,6 +115,11 @@ #define CHAMBER_BETA 3950 // Beta value #endif +#define HEATER_BED_INVERTING 1 +#define HEATER_0_INVERTING 1 +//#define HEATER_1_INVERTING 0 +#define FAN_INVERTING 1 + #if TEMP_SENSOR_COOLER == 1000 #define COOLER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor #define COOLER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C @@ -496,7 +503,7 @@ * * Define one or both of these to override the default 0-255 range. */ -//#define FAN_MIN_PWM 50 +#define FAN_MIN_PWM 30 //#define FAN_MAX_PWM 128 /** @@ -737,11 +744,11 @@ //#define SENSORLESS_BACKOFF_MM { 2, 2 } // (mm) Backoff from endstops before sensorless homing #define HOMING_BUMP_MM { 5, 5, 2 } // (mm) Backoff from endstops after first bump -#define HOMING_BUMP_DIVISOR { 2, 2, 4 } // Re-Bump Speed Divisor (Divides the Homing Feedrate) +#define HOMING_BUMP_DIVISOR { 5, 5, 5 } // Re-Bump Speed Divisor (Divides the Homing Feedrate) -//#define HOMING_BACKOFF_POST_MM { 2, 2, 2 } // (mm) Backoff from endstops after homing +#define HOMING_BACKOFF_POST_MM { 1, 1, 0 } // (mm) Backoff from endstops after homing -//#define QUICK_HOME // If G28 contains XY do a diagonal move first +#define QUICK_HOME // If G28 contains XY do a diagonal move first //#define HOME_Y_BEFORE_X // If G28 contains XY home Y before X //#define HOME_Z_FIRST // Home Z first. Requires a Z-MIN endstop (not a probe). //#define CODEPENDENT_XY_HOMING // If X/Y can't home without homing Y/X first @@ -867,7 +874,7 @@ // On a 300mm bed a 5% grade would give a misalignment of ~1.5cm #define G34_MAX_GRADE 5 // (%) Maximum incline that G34 will handle - #define Z_STEPPER_ALIGN_ITERATIONS 5 // Number of iterations to apply during alignment + #define Z_STEPPER_ALIGN_ITERATIONS 3 // Number of iterations to apply during alignment #define Z_STEPPER_ALIGN_ACC 0.02 // Stop iterating early if the accuracy is better than this #define RESTORE_LEVELING_AFTER_G34 // Restore leveling after G34 is done? // After G34, re-home Z (G28 Z) or just calculate it from the last probe heights? @@ -1134,7 +1141,7 @@ // @section lcd #if EITHER(IS_ULTIPANEL, EXTENSIBLE_UI) - #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel + #define MANUAL_FEEDRATE { 60*60, 60*60, 10*60, 10*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines #if IS_ULTIPANEL #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position" @@ -1219,7 +1226,7 @@ #if HAS_DISPLAY // The timeout (in ms) to return to the status screen from sub-menus - //#define LCD_TIMEOUT_TO_STATUS 15000 + #define LCD_TIMEOUT_TO_STATUS 15000 #if ENABLED(SHOW_BOOTSCREEN) #define BOOTSCREEN_TIMEOUT 4000 // (ms) Total Duration to display the boot screen(s) @@ -1229,10 +1236,10 @@ #endif // Scroll a longer status message into view - //#define STATUS_MESSAGE_SCROLLING + #define STATUS_MESSAGE_SCROLLING // On the Info Screen, display XY with one decimal place when possible - //#define LCD_DECIMAL_SMALL_XY + #define LCD_DECIMAL_SMALL_XY // Add an 'M73' G-code to set the current percentage //#define LCD_SET_PROGRESS_MANUALLY @@ -1381,10 +1388,10 @@ //#define UTF_FILENAME_SUPPORT // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT + #define LONG_FILENAME_HOST_SUPPORT // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES + #define SCROLL_LONG_FILENAMES // Leave the heaters on after Stop Print (not recommended!) //#define SD_ABORT_NO_COOLDOWN @@ -1512,14 +1519,14 @@ */ #if HAS_MARLINUI_U8GLIB // Show SD percentage next to the progress bar - //#define DOGM_SD_PERCENT + #define DOGM_SD_PERCENT // Save many cycles by drawing a hollow frame or no frame on the Info Screen //#define XYZ_NO_FRAME - #define XYZ_HOLLOW_FRAME + //#define XYZ_HOLLOW_FRAME // Enable to save many cycles by drawing a hollow frame on Menu Screens - #define MENU_HOLLOW_FRAME + //#define MENU_HOLLOW_FRAME // A bigger font is available for edit items. Costs 3120 bytes of PROGMEM. // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. @@ -1572,7 +1579,7 @@ //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames - //#define STATUS_HEAT_PERCENT // Show heating in a progress bar + #define STATUS_HEAT_PERCENT // Show heating in a progress bar //#define BOOT_MARLIN_LOGO_ANIMATED // Animated Marlin logo. Costs ~‭3260 (or ~940) bytes of PROGMEM. // Frivolous Game Options @@ -1790,28 +1797,28 @@ * * Warning: Does not respect endstops! */ -//#define BABYSTEPPING +#define BABYSTEPPING #if ENABLED(BABYSTEPPING) //#define INTEGRATED_BABYSTEPPING // EXPERIMENTAL integration of babystepping into the Stepper ISR //#define BABYSTEP_WITHOUT_HOMING - //#define BABYSTEP_ALWAYS_AVAILABLE // Allow babystepping at all times (not just during movement). + #define BABYSTEP_ALWAYS_AVAILABLE // Allow babystepping at all times (not just during movement). //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way //#define BABYSTEP_MILLIMETER_UNITS // Specify BABYSTEP_MULTIPLICATOR_(XY|Z) in mm instead of micro-steps - #define BABYSTEP_MULTIPLICATOR_Z 1 // (steps or mm) Steps or millimeter distance for each Z babystep - #define BABYSTEP_MULTIPLICATOR_XY 1 // (steps or mm) Steps or millimeter distance for each XY babystep + #define BABYSTEP_MULTIPLICATOR_Z 25 // (steps or mm) Steps or millimeter distance for each Z babystep + #define BABYSTEP_MULTIPLICATOR_XY 25 // (steps or mm) Steps or millimeter distance for each Z babystep - //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. + #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on doubleclick when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) - #define MOVE_Z_IDLE_MULTIPLICATOR 1 // Multiply 1mm by this factor for the move step size. + #define MOVE_Z_IDLE_MULTIPLICATOR 10 // Multiply 1mm by this factor for the move step size. #endif #endif - //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 + #define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping #if ENABLED(BABYSTEP_ZPROBE_OFFSET) @@ -2311,23 +2318,23 @@ * * Enable PARK_HEAD_ON_PAUSE to add the G-code M125 Pause and Park. */ -//#define ADVANCED_PAUSE_FEATURE +#define ADVANCED_PAUSE_FEATURE #if ENABLED(ADVANCED_PAUSE_FEATURE) #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. // This short retract is done immediately, before parking the nozzle. - #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast. + #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 40 // (mm/s) Unload filament feedrate. This can be pretty fast. #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload. + #define FILAMENT_CHANGE_UNLOAD_LENGTH 820 // (mm) The length of filament for a complete unload. // For Bowden, the full length of the tube and nozzle. // For direct drive, the full length of the nozzle. // Set to 0 for manual unloading. - #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE 6 // (mm/s) Slow move when starting load. - #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 0 // (mm) Slow length, to allow time to insert material. + #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE 40 // (mm/s) Slow move when starting load. + #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 730 // (mm) Slow length, to allow time to insert material. // 0 to disable start loading and skip to fast load only #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast. #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle. + #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 75 // (mm) Load length of filament, from extruder gear to nozzle. // For Bowden, the full length of the tube and nozzle. // For direct drive, the full length of the nozzle. //#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted. @@ -2349,10 +2356,10 @@ #define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed. #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change. - //#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. + #define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. //#define HOME_BEFORE_FILAMENT_CHANGE // If needed, home before parking for filament change - //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. + #define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) #endif diff --git a/config/examples/JGAurora/Magic/Configuration.h b/config/examples/JGAurora/Magic/Configuration.h index 78c2dc9160..c6e1c8c490 100644 --- a/config/examples/JGAurora/Magic/Configuration.h +++ b/config/examples/JGAurora/Magic/Configuration.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "JGAurora/Magic" + /** * Configuration.h * @@ -127,7 +129,7 @@ * * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ -#define BAUDRATE 250000 +#define BAUDRATE 115200 // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH @@ -138,11 +140,11 @@ #endif // Name displayed in the LCD "Ready" message and Info menu -//#define CUSTOM_MACHINE_NAME "3D Printer" +#define CUSTOM_MACHINE_NAME "3D Printer" // Printer's unique ID, used by some programs to differentiate between machines. // Choose your own or use a service like https://www.uuidgenerator.net/version4 -//#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" +#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" // @section extruder @@ -424,7 +426,7 @@ #define TEMP_SENSOR_5 0 #define TEMP_SENSOR_6 0 #define TEMP_SENSOR_7 0 -#define TEMP_SENSOR_BED 0 +#define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 #define TEMP_SENSOR_COOLER 0 @@ -472,7 +474,7 @@ // Above this temperature the heater will be switched off. // This can protect components from overheating, but NOT from shorts and failures. // (Use MINTEMP for thermistor short/failure protection.) -#define HEATER_0_MAXTEMP 275 +#define HEATER_0_MAXTEMP 260 #define HEATER_1_MAXTEMP 275 #define HEATER_2_MAXTEMP 275 #define HEATER_3_MAXTEMP 275 @@ -480,7 +482,7 @@ #define HEATER_5_MAXTEMP 275 #define HEATER_6_MAXTEMP 275 #define HEATER_7_MAXTEMP 275 -#define BED_MAXTEMP 150 +#define BED_MAXTEMP 125 #define CHAMBER_MAXTEMP 60 /** @@ -634,7 +636,7 @@ * Note: For Bowden Extruders make this large enough to allow load/unload. */ #define PREVENT_LENGTHY_EXTRUDE -#define EXTRUDE_MAXLENGTH 200 +#define EXTRUDE_MAXLENGTH 1000 //=========================================================================== //======================== Thermal Runaway Protection ======================= @@ -694,13 +696,13 @@ #define ENDSTOPPULLUPS #if DISABLED(ENDSTOPPULLUPS) // Disable ENDSTOPPULLUPS to set pullups individually - //#define ENDSTOPPULLUP_XMAX - //#define ENDSTOPPULLUP_YMAX - //#define ENDSTOPPULLUP_ZMAX - //#define ENDSTOPPULLUP_XMIN - //#define ENDSTOPPULLUP_YMIN - //#define ENDSTOPPULLUP_ZMIN - //#define ENDSTOPPULLUP_ZMIN_PROBE + #define ENDSTOPPULLUP_XMAX + #define ENDSTOPPULLUP_YMAX + #define ENDSTOPPULLUP_ZMAX + #define ENDSTOPPULLUP_XMIN + #define ENDSTOPPULLUP_YMIN + #define ENDSTOPPULLUP_ZMIN + #define ENDSTOPPULLUP_ZMIN_PROBE #endif // Enable pulldown for all endstops to prevent a floating state @@ -717,13 +719,13 @@ #endif // Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define X_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_PROBE_ENDSTOP_INVERTING false // Set to true to invert the logic of the probe. +#define X_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Y_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Z_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define X_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Y_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Z_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Z_MIN_PROBE_ENDSTOP_INVERTING true // Set to true to invert the logic of the probe. /** * Stepper Drivers @@ -806,7 +808,7 @@ * Override with M92 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 500 } +#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 800, 88 } /** * Default Max Feed Rate (mm/s) @@ -826,7 +828,7 @@ * Override with M201 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 } +#define DEFAULT_MAX_ACCELERATION { 300, 300, 100, 400 } //#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 #if ENABLED(LIMITED_MAX_ACCEL_EDITING) @@ -841,9 +843,9 @@ * M204 R Retract Acceleration * M204 T Travel Acceleration */ -#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves +#define DEFAULT_ACCELERATION 300 // X, Y, Z and E acceleration for printing moves +#define DEFAULT_RETRACT_ACCELERATION 400 // E acceleration for retracts +#define DEFAULT_TRAVEL_ACCELERATION 300 // X, Y, Z acceleration for travel (non printing) moves /** * Default Jerk limits (mm/s) @@ -890,7 +892,7 @@ * * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained */ -//#define S_CURVE_ACCELERATION +#define S_CURVE_ACCELERATION //=========================================================================== //============================= Z Probe Options ============================= @@ -1055,7 +1057,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +#define NOZZLE_TO_PROBE_OFFSET { -25, 1, 0 } // Most probes should stay away from the edges of the bed, but // with NOZZLE_AS_PROBE this can be negative for a wider probing area. @@ -1192,7 +1194,7 @@ // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR false #define INVERT_Y_DIR true -#define INVERT_Z_DIR false +#define INVERT_Z_DIR true // @section extruder @@ -1232,16 +1234,16 @@ // @section machine // The size of the printable area -#define X_BED_SIZE 200 -#define Y_BED_SIZE 200 +#define X_BED_SIZE 236 +#define Y_BED_SIZE 223 // Travel limits (mm) after homing, corresponding to endstop positions. -#define X_MIN_POS 0 +#define X_MIN_POS -16 #define Y_MIN_POS 0 #define Z_MIN_POS 0 #define X_MAX_POS X_BED_SIZE #define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 200 +#define Z_MAX_POS 250 /** * Software Endstops @@ -1285,12 +1287,12 @@ * RAMPS-based boards use SERVO3_PIN for the first runout sensor. * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. */ -//#define FILAMENT_RUNOUT_SENSOR +#define FILAMENT_RUNOUT_SENSOR #if ENABLED(FILAMENT_RUNOUT_SENSOR) #define FIL_RUNOUT_ENABLED_DEFAULT true // Enable the sensor on startup. Override with M412 followed by M500. #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. - #define FIL_RUNOUT_STATE LOW // Pin state indicating that filament is NOT present. + #define FIL_RUNOUT_STATE HIGH // Pin state indicating that filament is NOT present. #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. //#define WATCH_ALL_RUNOUT_SENSORS // Execute runout script on any triggering sensor, not only for the active extruder. @@ -1389,14 +1391,14 @@ //#define AUTO_BED_LEVELING_LINEAR //#define AUTO_BED_LEVELING_BILINEAR //#define AUTO_BED_LEVELING_UBL -//#define MESH_BED_LEVELING +#define MESH_BED_LEVELING /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable * leveling immediately after G28. */ -//#define RESTORE_LEVELING_AFTER_G28 +#define RESTORE_LEVELING_AFTER_G28 //#define ENABLE_LEVELING_AFTER_G28 /** @@ -1424,7 +1426,7 @@ // Gradually reduce leveling correction until a set height is reached, // at which point movement will be level to the machine's XY plane. // The height can be set with M420 Z - #define ENABLE_LEVELING_FADE_HEIGHT + //#define ENABLE_LEVELING_FADE_HEIGHT #if ENABLED(ENABLE_LEVELING_FADE_HEIGHT) #define DEFAULT_LEVELING_FADE_HEIGHT 10.0 // (mm) Default fade height. #endif @@ -1518,22 +1520,22 @@ * Add a bed leveling sub-menu for ABL or MBL. * Include a guided procedure if manual probing is enabled. */ -//#define LCD_BED_LEVELING +#define LCD_BED_LEVELING #if ENABLED(LCD_BED_LEVELING) #define MESH_EDIT_Z_STEP 0.025 // (mm) Step size while manually probing Z axis. #define LCD_PROBE_Z_RANGE 4 // (mm) Z Range centered on Z_MIN_POS for LCD Z adjustment - //#define MESH_EDIT_MENU // Add a menu to edit mesh points + #define MESH_EDIT_MENU // Add a menu to edit mesh points #endif // Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS +#define LEVEL_BED_CORNERS #if ENABLED(LEVEL_BED_CORNERS) #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner + #define LEVEL_CENTER_TOO // Move to the center after the last corner //#define LEVEL_CORNERS_USE_PROBE #if ENABLED(LEVEL_CORNERS_USE_PROBE) #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 @@ -1672,12 +1674,12 @@ * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) */ -//#define EEPROM_SETTINGS // Persistent storage with M500 and M501 +#define EEPROM_SETTINGS // Persistent storage with M500 and M501 //#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. #define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load #if ENABLED(EEPROM_SETTINGS) - //#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. + #define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. #endif // @@ -1706,8 +1708,8 @@ // Preheat Constants - Up to 5 are supported without changes // #define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 180 -#define PREHEAT_1_TEMP_BED 70 +#define PREHEAT_1_TEMP_HOTEND 200 +#define PREHEAT_1_TEMP_BED 60 #define PREHEAT_1_TEMP_CHAMBER 35 #define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 @@ -1728,11 +1730,11 @@ * P1 Raise the nozzle always to Z-park height. * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. */ -//#define NOZZLE_PARK_FEATURE +#define NOZZLE_PARK_FEATURE #if ENABLED(NOZZLE_PARK_FEATURE) // Specify a park position as { X, Y, Z_raise } - #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 } + #define NOZZLE_PARK_POINT { (X_MIN_POS), (Y_MAX_POS), 10 } //#define NOZZLE_PARK_X_ONLY // X move only is required to park //#define NOZZLE_PARK_Y_ONLY // Y move only is required to park #define NOZZLE_PARK_Z_RAISE_MIN 2 // (mm) Always raise Z by at least this distance @@ -1936,7 +1938,7 @@ * SD Card support is disabled by default. If your controller has an SD slot, * you must uncomment the following option or it won't work. */ -//#define SDSUPPORT +#define SDSUPPORT /** * SD CARD: ENABLE CRC @@ -2014,7 +2016,7 @@ // If you have a speaker that can produce tones, enable it here. // By default Marlin assumes you have a buzzer with a fixed frequency. // -//#define SPEAKER +#define SPEAKER // // The duration and frequency for the UI feedback sound. @@ -2023,8 +2025,8 @@ // Note: Test audio output with the G-Code: // M300 S P // -//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 -//#define LCD_FEEDBACK_FREQUENCY_HZ 5000 +#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 50 +#define LCD_FEEDBACK_FREQUENCY_HZ 10 //============================================================================= //======================== LCD / Controller Selection ========================= @@ -2195,7 +2197,7 @@ // RepRapDiscount FULL GRAPHIC Smart Controller // https://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller // -//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER +#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER // // K.3D Full Graphic Smart Controller @@ -2618,7 +2620,7 @@ // Use software PWM to drive the fan, as for the heaters. This uses a very low frequency // which is not as annoying as with the hardware PWM. On the other hand, if this frequency // is too low, you should also increment SOFT_PWM_SCALE. -//#define FAN_SOFT_PWM +#define FAN_SOFT_PWM // Incrementing this by 1 will double the software PWM frequency, // affecting heaters, and the fan if FAN_SOFT_PWM is enabled. diff --git a/config/examples/JGAurora/Magic/Configuration_adv.h b/config/examples/JGAurora/Magic/Configuration_adv.h index 5335fa012a..d48475b540 100644 --- a/config/examples/JGAurora/Magic/Configuration_adv.h +++ b/config/examples/JGAurora/Magic/Configuration_adv.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "JGAurora/Magic" + /** * Configuration_adv.h * @@ -741,7 +743,7 @@ //#define HOMING_BACKOFF_POST_MM { 2, 2, 2 } // (mm) Backoff from endstops after homing -//#define QUICK_HOME // If G28 contains XY do a diagonal move first +#define QUICK_HOME // If G28 contains XY do a diagonal move first //#define HOME_Y_BEFORE_X // If G28 contains XY home Y before X //#define HOME_Z_FIRST // Home Z first. Requires a Z-MIN endstop (not a probe). //#define CODEPENDENT_XY_HOMING // If X/Y can't home without homing Y/X first @@ -867,7 +869,7 @@ // On a 300mm bed a 5% grade would give a misalignment of ~1.5cm #define G34_MAX_GRADE 5 // (%) Maximum incline that G34 will handle - #define Z_STEPPER_ALIGN_ITERATIONS 5 // Number of iterations to apply during alignment + #define Z_STEPPER_ALIGN_ITERATIONS 3 // Number of iterations to apply during alignment #define Z_STEPPER_ALIGN_ACC 0.02 // Stop iterating early if the accuracy is better than this #define RESTORE_LEVELING_AFTER_G34 // Restore leveling after G34 is done? // After G34, re-home Z (G28 Z) or just calculate it from the last probe heights? @@ -1301,7 +1303,7 @@ //#define BROWSE_MEDIA_ON_INSERT // Open the file browser when media is inserted - #define EVENT_GCODE_SD_ABORT "G28XY" // G-code to run on SD Abort Print (e.g., "G28XY" or "G27") + #define EVENT_GCODE_SD_ABORT "G27" // G-code to run on SD Abort Print (e.g., "G28XY" or "G27") #if ENABLED(PRINTER_EVENT_LEDS) #define PE_LEDS_COMPLETED_TIME (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination @@ -1790,20 +1792,20 @@ * * Warning: Does not respect endstops! */ -//#define BABYSTEPPING +#define BABYSTEPPING #if ENABLED(BABYSTEPPING) //#define INTEGRATED_BABYSTEPPING // EXPERIMENTAL integration of babystepping into the Stepper ISR //#define BABYSTEP_WITHOUT_HOMING - //#define BABYSTEP_ALWAYS_AVAILABLE // Allow babystepping at all times (not just during movement). + #define BABYSTEP_ALWAYS_AVAILABLE // Allow babystepping at all times (not just during movement). //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way //#define BABYSTEP_MILLIMETER_UNITS // Specify BABYSTEP_MULTIPLICATOR_(XY|Z) in mm instead of micro-steps #define BABYSTEP_MULTIPLICATOR_Z 1 // (steps or mm) Steps or millimeter distance for each Z babystep #define BABYSTEP_MULTIPLICATOR_XY 1 // (steps or mm) Steps or millimeter distance for each XY babystep - //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. + #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 2000 // Maximum interval between clicks, in milliseconds. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on doubleclick when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) @@ -2311,28 +2313,28 @@ * * Enable PARK_HEAD_ON_PAUSE to add the G-code M125 Pause and Park. */ -//#define ADVANCED_PAUSE_FEATURE +#define ADVANCED_PAUSE_FEATURE #if ENABLED(ADVANCED_PAUSE_FEATURE) #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. // This short retract is done immediately, before parking the nozzle. - #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast. + #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 100 // (mm/s) Unload filament feedrate. This can be pretty fast. #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload. + #define FILAMENT_CHANGE_UNLOAD_LENGTH 600 // (mm) The length of filament for a complete unload. // For Bowden, the full length of the tube and nozzle. // For direct drive, the full length of the nozzle. // Set to 0 for manual unloading. - #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE 6 // (mm/s) Slow move when starting load. - #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 0 // (mm) Slow length, to allow time to insert material. + #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE 20 // (mm/s) Slow move when starting load. + #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 40 // (mm) Slow length, to allow time to insert material. // 0 to disable start loading and skip to fast load only - #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast. + #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 60 // (mm/s) Load filament feedrate. This can be pretty fast. #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle. + #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 460 // (mm) Load length of filament, from extruder gear to nozzle. // For Bowden, the full length of the tube and nozzle. // For direct drive, the full length of the nozzle. //#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted. - #define ADVANCED_PAUSE_PURGE_FEEDRATE 3 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate. - #define ADVANCED_PAUSE_PURGE_LENGTH 50 // (mm) Length to extrude after loading. + #define ADVANCED_PAUSE_PURGE_FEEDRATE 10 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate. + #define ADVANCED_PAUSE_PURGE_LENGTH 20 // (mm) Length to extrude after loading. // Set to 0 for manual extrusion. // Filament can be extruded repeatedly from the Filament Change menu // until extrusion is consistent, and to purge old filament. @@ -2349,11 +2351,11 @@ #define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed. #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change. - //#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. - //#define HOME_BEFORE_FILAMENT_CHANGE // If needed, home before parking for filament change + #define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. + #define HOME_BEFORE_FILAMENT_CHANGE // If needed, home before parking for filament change - //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. - //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) + #define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. + #define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) #endif // @section tmc diff --git a/config/examples/Kingroon/KP3/Configuration.h b/config/examples/Kingroon/KP3/Configuration.h index 78c2dc9160..3ef9160127 100644 --- a/config/examples/Kingroon/KP3/Configuration.h +++ b/config/examples/Kingroon/KP3/Configuration.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Kingroon/KP3" + /** * Configuration.h * @@ -69,7 +71,7 @@ // @section info // Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes. +#define STRING_CONFIG_H_AUTHOR "(FXD)" // Who made the changes. //#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) /** @@ -84,7 +86,7 @@ */ // Show the Marlin bootscreen on startup. ** ENABLE FOR PRODUCTION ** -#define SHOW_BOOTSCREEN +//#define SHOW_BOOTSCREEN // Show the bitmap in Marlin/_Bootscreen.h on startup. //#define SHOW_CUSTOM_BOOTSCREEN @@ -102,14 +104,14 @@ * * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] */ -#define SERIAL_PORT 0 +#define SERIAL_PORT 3 /** * Select a secondary serial port on the board to use for communication with the host. * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] */ -//#define SERIAL_PORT_2 -1 +#define SERIAL_PORT_2 1 /** * Select a third serial port on the board to use for communication with the host. @@ -127,18 +129,18 @@ * * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ -#define BAUDRATE 250000 +#define BAUDRATE 115200 // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH // Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_RAMPS_14_EFB + #define MOTHERBOARD BOARD_MKS_ROBIN_MINI #endif // Name displayed in the LCD "Ready" message and Info menu -//#define CUSTOM_MACHINE_NAME "3D Printer" +#define CUSTOM_MACHINE_NAME "KP3" // Printer's unique ID, used by some programs to differentiate between machines. // Choose your own or use a service like https://www.uuidgenerator.net/version4 @@ -424,7 +426,7 @@ #define TEMP_SENSOR_5 0 #define TEMP_SENSOR_6 0 #define TEMP_SENSOR_7 0 -#define TEMP_SENSOR_BED 0 +#define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 #define TEMP_SENSOR_COOLER 0 @@ -444,11 +446,11 @@ //#define TEMP_SENSOR_1_AS_REDUNDANT #define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10 -#define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 +#define TEMP_RESIDENCY_TIME 5 // (seconds) Time to wait for hotend to "settle" in M109 #define TEMP_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer #define TEMP_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target -#define TEMP_BED_RESIDENCY_TIME 10 // (seconds) Time to wait for bed to "settle" in M190 +#define TEMP_BED_RESIDENCY_TIME 5 // (seconds) Time to wait for bed to "settle" in M190 #define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer #define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target @@ -480,7 +482,7 @@ #define HEATER_5_MAXTEMP 275 #define HEATER_6_MAXTEMP 275 #define HEATER_7_MAXTEMP 275 -#define BED_MAXTEMP 150 +#define BED_MAXTEMP 120 #define CHAMBER_MAXTEMP 60 /** @@ -540,7 +542,7 @@ * heater. If your configuration is significantly different than this and you don't understand * the issues involved, don't use bed PID until someone else verifies that your hardware works. */ -//#define PIDTEMPBED +#define PIDTEMPBED //#define BED_LIMIT_SWITCHING @@ -556,11 +558,10 @@ //#define MIN_BED_POWER 0 //#define PID_BED_DEBUG // Sends debug data to the serial port. - // 120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - // from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) - #define DEFAULT_bedKp 10.00 - #define DEFAULT_bedKi .023 - #define DEFAULT_bedKd 305.4 + // KINGROON KP3 + #define DEFAULT_bedKp 690.34 + #define DEFAULT_bedKi 111.47 + #define DEFAULT_bedKd 1068.83 // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. #endif // PIDTEMPBED @@ -634,7 +635,7 @@ * Note: For Bowden Extruders make this large enough to allow load/unload. */ #define PREVENT_LENGTHY_EXTRUDE -#define EXTRUDE_MAXLENGTH 200 +#define EXTRUDE_MAXLENGTH 1000 //=========================================================================== //======================== Thermal Runaway Protection ======================= @@ -717,13 +718,13 @@ #endif // Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. +#define X_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Y_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Z_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. #define X_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. #define Y_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. #define Z_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_PROBE_ENDSTOP_INVERTING false // Set to true to invert the logic of the probe. +#define Z_MIN_PROBE_ENDSTOP_INVERTING true // Set to true to invert the logic of the probe. /** * Stepper Drivers @@ -762,7 +763,7 @@ // Enable this feature if all enabled endstop pins are interrupt-capable. // This will remove the need to poll the interrupt pins, saving many CPU cycles. -//#define ENDSTOP_INTERRUPTS_FEATURE +#define ENDSTOP_INTERRUPTS_FEATURE /** * Endstop Noise Threshold @@ -776,7 +777,7 @@ * * :[2,3,4,5,6,7] */ -//#define ENDSTOP_NOISE_THRESHOLD 2 +#define ENDSTOP_NOISE_THRESHOLD 2 // Check for stuck or disconnected endstops during homing moves. //#define DETECT_BROKEN_ENDSTOP @@ -806,7 +807,7 @@ * Override with M92 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 500 } +#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 95 } /** * Default Max Feed Rate (mm/s) @@ -826,7 +827,7 @@ * Override with M201 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 } +#define DEFAULT_MAX_ACCELERATION { 500, 500, 100, 5000 } //#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 #if ENABLED(LIMITED_MAX_ACCEL_EDITING) @@ -841,9 +842,9 @@ * M204 R Retract Acceleration * M204 T Travel Acceleration */ -#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves +#define DEFAULT_ACCELERATION 500 // X, Y, Z and E acceleration for printing moves +#define DEFAULT_RETRACT_ACCELERATION 500 // E acceleration for retracts +#define DEFAULT_TRAVEL_ACCELERATION 500 // X, Y, Z acceleration for travel (non printing) moves /** * Default Jerk limits (mm/s) @@ -853,7 +854,7 @@ * When changing speed and direction, if the difference is less than the * value set here, it may happen instantaneously. */ -//#define CLASSIC_JERK +#define CLASSIC_JERK #if ENABLED(CLASSIC_JERK) #define DEFAULT_XJERK 10.0 #define DEFAULT_YJERK 10.0 @@ -890,7 +891,7 @@ * * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained */ -//#define S_CURVE_ACCELERATION +#define S_CURVE_ACCELERATION //=========================================================================== //============================= Z Probe Options ============================= @@ -940,7 +941,7 @@ * Use G29 repeatedly, adjusting the Z height at each point with movement commands * or (with LCD_BED_LEVELING) the LCD controller. */ -//#define PROBE_MANUALLY +#define PROBE_MANUALLY /** * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. @@ -1059,7 +1060,7 @@ // Most probes should stay away from the edges of the bed, but // with NOZZLE_AS_PROBE this can be negative for a wider probing area. -#define PROBING_MARGIN 10 +#define PROBING_MARGIN 5 // X and Y axis travel speed (mm/min) between probes #define XY_PROBE_FEEDRATE (133*60) @@ -1126,13 +1127,13 @@ #define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow #define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points #define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes -//#define Z_AFTER_PROBING 5 // Z position after probing is done +#define Z_AFTER_PROBING 5 // Z position after probing is done -#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping +#define Z_PROBE_LOW_POINT -3 // Farthest distance below the trigger-point to go before stopping // For M851 give a range for adjusting the Z probe offset -#define Z_PROBE_OFFSET_RANGE_MIN -20 -#define Z_PROBE_OFFSET_RANGE_MAX 20 +#define Z_PROBE_OFFSET_RANGE_MIN -5 +#define Z_PROBE_OFFSET_RANGE_MAX 1 // Enable the M48 repeatability test to test probe accuracy //#define Z_MIN_PROBE_REPEATABILITY_TEST @@ -1191,8 +1192,8 @@ // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR false -#define INVERT_Y_DIR true -#define INVERT_Z_DIR false +#define INVERT_Y_DIR false +#define INVERT_Z_DIR true // @section extruder @@ -1216,12 +1217,12 @@ * - Use a low value (i.e., Z_MIN_POS) if the nozzle falls down to the bed. * - Use a large value (i.e., Z_MAX_POS) if the bed falls down, away from the nozzle. */ -//#define Z_IDLE_HEIGHT Z_HOME_POS +#define Z_IDLE_HEIGHT Z_MAX_POS -//#define Z_HOMING_HEIGHT 4 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ... +#define Z_HOMING_HEIGHT 4 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ... // Be sure to have this much clearance over your Z_MAX_POS to prevent grinding. -//#define Z_AFTER_HOMING 10 // (mm) Height to move to after homing Z +#define Z_AFTER_HOMING 10 // (mm) Height to move to after homing Z // Direction of endstops when homing; 1=MAX, -1=MIN // :[-1,1] @@ -1232,8 +1233,8 @@ // @section machine // The size of the printable area -#define X_BED_SIZE 200 -#define Y_BED_SIZE 200 +#define X_BED_SIZE 180 +#define Y_BED_SIZE 180 // Travel limits (mm) after homing, corresponding to endstop positions. #define X_MIN_POS 0 @@ -1241,7 +1242,7 @@ #define Z_MIN_POS 0 #define X_MAX_POS X_BED_SIZE #define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 200 +#define Z_MAX_POS 180 /** * Software Endstops @@ -1269,7 +1270,7 @@ #endif #if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS) - //#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD + #define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD #endif /** @@ -1285,12 +1286,12 @@ * RAMPS-based boards use SERVO3_PIN for the first runout sensor. * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. */ -//#define FILAMENT_RUNOUT_SENSOR +#define FILAMENT_RUNOUT_SENSOR #if ENABLED(FILAMENT_RUNOUT_SENSOR) #define FIL_RUNOUT_ENABLED_DEFAULT true // Enable the sensor on startup. Override with M412 followed by M500. #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. - #define FIL_RUNOUT_STATE LOW // Pin state indicating that filament is NOT present. + #define FIL_RUNOUT_STATE HIGH // Pin state indicating that filament is NOT present. #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. //#define WATCH_ALL_RUNOUT_SENSORS // Execute runout script on any triggering sensor, not only for the active extruder. @@ -1389,14 +1390,14 @@ //#define AUTO_BED_LEVELING_LINEAR //#define AUTO_BED_LEVELING_BILINEAR //#define AUTO_BED_LEVELING_UBL -//#define MESH_BED_LEVELING +#define MESH_BED_LEVELING /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable * leveling immediately after G28. */ -//#define RESTORE_LEVELING_AFTER_G28 +#define RESTORE_LEVELING_AFTER_G28 //#define ENABLE_LEVELING_AFTER_G28 /** @@ -1518,7 +1519,7 @@ * Add a bed leveling sub-menu for ABL or MBL. * Include a guided procedure if manual probing is enabled. */ -//#define LCD_BED_LEVELING +#define LCD_BED_LEVELING #if ENABLED(LCD_BED_LEVELING) #define MESH_EDIT_Z_STEP 0.025 // (mm) Step size while manually probing Z axis. @@ -1527,13 +1528,13 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS +#define LEVEL_BED_CORNERS #if ENABLED(LEVEL_BED_CORNERS) #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner + #define LEVEL_CENTER_TOO // Move to the center after the last corner //#define LEVEL_CORNERS_USE_PROBE #if ENABLED(LEVEL_CORNERS_USE_PROBE) #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 @@ -1595,7 +1596,7 @@ #endif // Homing speeds (mm/min) -#define HOMING_FEEDRATE_MM_M { (50*60), (50*60), (4*60) } +#define HOMING_FEEDRATE_MM_M { (20*60), (20*60), (4*60) } // Validate that endstops are triggered on homing moves #define VALIDATE_HOMING_ENDSTOPS @@ -1672,12 +1673,12 @@ * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) */ -//#define EEPROM_SETTINGS // Persistent storage with M500 and M501 +#define EEPROM_SETTINGS // Persistent storage with M500 and M501 //#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. #define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load #if ENABLED(EEPROM_SETTINGS) - //#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. + #define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. #endif // @@ -1706,14 +1707,14 @@ // Preheat Constants - Up to 5 are supported without changes // #define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 180 -#define PREHEAT_1_TEMP_BED 70 +#define PREHEAT_1_TEMP_HOTEND 200 +#define PREHEAT_1_TEMP_BED 60 #define PREHEAT_1_TEMP_CHAMBER 35 #define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 -#define PREHEAT_2_LABEL "ABS" -#define PREHEAT_2_TEMP_HOTEND 240 -#define PREHEAT_2_TEMP_BED 110 +#define PREHEAT_2_LABEL "PTG" +#define PREHEAT_2_TEMP_HOTEND 235 +#define PREHEAT_2_TEMP_BED 80 #define PREHEAT_2_TEMP_CHAMBER 35 #define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 @@ -1728,7 +1729,7 @@ * P1 Raise the nozzle always to Z-park height. * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. */ -//#define NOZZLE_PARK_FEATURE +#define NOZZLE_PARK_FEATURE #if ENABLED(NOZZLE_PARK_FEATURE) // Specify a park position as { X, Y, Z_raise } @@ -1936,14 +1937,15 @@ * SD Card support is disabled by default. If your controller has an SD slot, * you must uncomment the following option or it won't work. */ -//#define SDSUPPORT +#define SDSUPPORT +#define SDIO_SUPPORT /** * SD CARD: ENABLE CRC * * Use CRC checks and retries on the SD communication. */ -//#define SD_CHECK_AND_RETRY +#define SD_CHECK_AND_RETRY /** * LCD Menu Items @@ -2006,7 +2008,7 @@ // // Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. // -//#define INDIVIDUAL_AXIS_HOMING_MENU +#define INDIVIDUAL_AXIS_HOMING_MENU // // SPEAKER/BUZZER @@ -2518,17 +2520,17 @@ // // Generic TFT with detailed options // -//#define TFT_GENERIC +#define TFT_GENERIC #if ENABLED(TFT_GENERIC) // :[ 'AUTO', 'ST7735', 'ST7789', 'ST7796', 'R61505', 'ILI9328', 'ILI9341', 'ILI9488' ] #define TFT_DRIVER AUTO // Interface. Enable one of the following options: - //#define TFT_INTERFACE_FSMC + #define TFT_INTERFACE_FSMC //#define TFT_INTERFACE_SPI // TFT Resolution. Enable one of the following options: - //#define TFT_RES_320x240 + #define TFT_RES_320x240 //#define TFT_RES_480x272 //#define TFT_RES_480x320 #endif @@ -2543,7 +2545,7 @@ * For LVGL_UI also copy the 'assets' folder from the build directory to the * root of your SD card, together with the compiled firmware. */ -//#define TFT_CLASSIC_UI +#define TFT_CLASSIC_UI //#define TFT_COLOR_UI //#define TFT_LVGL_UI @@ -2573,17 +2575,24 @@ // // Touch Screen Settings // -//#define TOUCH_SCREEN +#define TOUCH_SCREEN #if ENABLED(TOUCH_SCREEN) - #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens - #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus + #define BUTTON_DELAY_EDIT 75 // (ms) Button repeat delay for edit screens + #define BUTTON_DELAY_MENU 100 // (ms) Button repeat delay for menus #define TOUCH_SCREEN_CALIBRATION - //#define TOUCH_CALIBRATION_X 12316 - //#define TOUCH_CALIBRATION_Y -8981 - //#define TOUCH_OFFSET_X -43 - //#define TOUCH_OFFSET_Y 257 + /* MKS Robin TFT v2.0 */ + #define TOUCH_CALIBRATION_X 12013 + #define TOUCH_CALIBRATION_Y -8711 + #define TOUCH_OFFSET_X -32 + #define TOUCH_OFFSET_Y 256 + + /* MKS Robin TFT v1.1 */ + //#define TOUCH_CALIBRATION_X -11792 + //#define TOUCH_CALIBRATION_Y 8947 + //#define TOUCH_OFFSET_X 342 + //#define TOUCH_OFFSET_Y -19 //#define TOUCH_ORIENTATION TOUCH_LANDSCAPE #if BOTH(TOUCH_SCREEN_CALIBRATION, EEPROM_SETTINGS) diff --git a/config/examples/Kingroon/KP3/Configuration_adv.h b/config/examples/Kingroon/KP3/Configuration_adv.h index 5335fa012a..1094e243af 100644 --- a/config/examples/Kingroon/KP3/Configuration_adv.h +++ b/config/examples/Kingroon/KP3/Configuration_adv.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Kingroon/KP3" + /** * Configuration_adv.h * @@ -867,7 +869,7 @@ // On a 300mm bed a 5% grade would give a misalignment of ~1.5cm #define G34_MAX_GRADE 5 // (%) Maximum incline that G34 will handle - #define Z_STEPPER_ALIGN_ITERATIONS 5 // Number of iterations to apply during alignment + #define Z_STEPPER_ALIGN_ITERATIONS 3 // Number of iterations to apply during alignment #define Z_STEPPER_ALIGN_ACC 0.02 // Stop iterating early if the accuracy is better than this #define RESTORE_LEVELING_AFTER_G34 // Restore leveling after G34 is done? // After G34, re-home Z (G28 Z) or just calculate it from the last probe heights? @@ -1175,7 +1177,7 @@ #endif // Include a page of printer information in the LCD Main Menu - //#define LCD_INFO_MENU + #define LCD_INFO_MENU #if ENABLED(LCD_INFO_MENU) //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages #endif @@ -1229,13 +1231,13 @@ #endif // Scroll a longer status message into view - //#define STATUS_MESSAGE_SCROLLING + #define STATUS_MESSAGE_SCROLLING // On the Info Screen, display XY with one decimal place when possible - //#define LCD_DECIMAL_SMALL_XY + #define LCD_DECIMAL_SMALL_XY // Add an 'M73' G-code to set the current percentage - //#define LCD_SET_PROGRESS_MANUALLY + #define LCD_SET_PROGRESS_MANUALLY // Show the E position (filament used) during printing //#define LCD_SHOW_E_TOTAL @@ -1274,11 +1276,11 @@ * * :['SPI_HALF_SPEED', 'SPI_QUARTER_SPEED', 'SPI_EIGHTH_SPEED'] */ - //#define SD_SPI_SPEED SPI_HALF_SPEED + #define SD_SPI_SPEED SPI_HALF_SPEED // The standard SD detect circuit reads LOW when media is inserted and HIGH when empty. // Enable this option and set to HIGH if your SD cards are incorrectly detected. - //#define SD_DETECT_STATE HIGH + #define SD_DETECT_STATE LOW //#define SD_IGNORE_AT_STARTUP // Don't mount the SD card when starting up //#define SDCARD_READONLY // Read-only SD card (to save over 2K of flash) @@ -1292,7 +1294,7 @@ // Reverse SD sort to show "more recent" files first, according to the card's FAT. // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended. - #define SDCARD_RATHERRECENTFIRST + //#define SDCARD_RATHERRECENTFIRST #define SD_MENU_CONFIRM_START // Confirm the selected SD file before printing @@ -1384,7 +1386,7 @@ //#define LONG_FILENAME_HOST_SUPPORT // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES + #define SCROLL_LONG_FILENAMES // Leave the heaters on after Stop Print (not recommended!) //#define SD_ABORT_NO_COOLDOWN @@ -1406,7 +1408,7 @@ /** * Auto-report SdCard status with M27 S */ - //#define AUTO_REPORT_SD_STATUS + #define AUTO_REPORT_SD_STATUS /** * Support for USB thumb drives using an Arduino USB Host Shield or @@ -1512,7 +1514,7 @@ */ #if HAS_MARLINUI_U8GLIB // Show SD percentage next to the progress bar - //#define DOGM_SD_PERCENT + #define DOGM_SD_PERCENT // Save many cycles by drawing a hollow frame or no frame on the Info Screen //#define XYZ_NO_FRAME @@ -1572,7 +1574,7 @@ //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames - //#define STATUS_HEAT_PERCENT // Show heating in a progress bar + #define STATUS_HEAT_PERCENT // Show heating in a progress bar //#define BOOT_MARLIN_LOGO_ANIMATED // Animated Marlin logo. Costs ~‭3260 (or ~940) bytes of PROGMEM. // Frivolous Game Options @@ -1840,7 +1842,7 @@ //#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) //#define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants - #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed + #define LIN_ADVANCE_K 0.0 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // If enabled, this will generate debug information output over USB. //#define EXPERIMENTAL_SCURVE // Enable this option to permit S-Curve Acceleration #endif @@ -2311,7 +2313,7 @@ * * Enable PARK_HEAD_ON_PAUSE to add the G-code M125 Pause and Park. */ -//#define ADVANCED_PAUSE_FEATURE +#define ADVANCED_PAUSE_FEATURE #if ENABLED(ADVANCED_PAUSE_FEATURE) #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. @@ -3439,7 +3441,7 @@ /** * Disable all Volumetric extrusion options */ -//#define NO_VOLUMETRICS +#define NO_VOLUMETRICS #if DISABLED(NO_VOLUMETRICS) /** diff --git a/config/examples/Labists/ET4/Configuration.h b/config/examples/Labists/ET4/Configuration.h index 78c2dc9160..98b70edcf7 100644 --- a/config/examples/Labists/ET4/Configuration.h +++ b/config/examples/Labists/ET4/Configuration.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Labists/ET4" + /** * Configuration.h * @@ -102,7 +104,7 @@ * * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] */ -#define SERIAL_PORT 0 +#define SERIAL_PORT 1 /** * Select a secondary serial port on the board to use for communication with the host. @@ -127,18 +129,18 @@ * * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ -#define BAUDRATE 250000 +#define BAUDRATE 115200 // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH // Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_RAMPS_14_EFB + #define MOTHERBOARD BOARD_ANET_ET4 #endif // Name displayed in the LCD "Ready" message and Info menu -//#define CUSTOM_MACHINE_NAME "3D Printer" +#define CUSTOM_MACHINE_NAME "Labists ET4" // Printer's unique ID, used by some programs to differentiate between machines. // Choose your own or use a service like https://www.uuidgenerator.net/version4 @@ -424,7 +426,7 @@ #define TEMP_SENSOR_5 0 #define TEMP_SENSOR_6 0 #define TEMP_SENSOR_7 0 -#define TEMP_SENSOR_BED 0 +#define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 #define TEMP_SENSOR_COOLER 0 @@ -445,12 +447,12 @@ #define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10 #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 -#define TEMP_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target +#define TEMP_WINDOW 3 // (°C) Temperature proximity for the "temperature reached" timer +#define TEMP_HYSTERESIS 5 // (°C) Temperature proximity considered "close enough" to the target #define TEMP_BED_RESIDENCY_TIME 10 // (seconds) Time to wait for bed to "settle" in M190 -#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target +#define TEMP_BED_WINDOW 3 // (°C) Temperature proximity for the "temperature reached" timer +#define TEMP_BED_HYSTERESIS 5 // (°C) Temperature proximity considered "close enough" to the target #define TEMP_CHAMBER_RESIDENCY_TIME 10 // (seconds) Time to wait for chamber to "settle" in M191 #define TEMP_CHAMBER_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer @@ -472,7 +474,7 @@ // Above this temperature the heater will be switched off. // This can protect components from overheating, but NOT from shorts and failures. // (Use MINTEMP for thermistor short/failure protection.) -#define HEATER_0_MAXTEMP 275 +#define HEATER_0_MAXTEMP 260 #define HEATER_1_MAXTEMP 275 #define HEATER_2_MAXTEMP 275 #define HEATER_3_MAXTEMP 275 @@ -480,7 +482,7 @@ #define HEATER_5_MAXTEMP 275 #define HEATER_6_MAXTEMP 275 #define HEATER_7_MAXTEMP 275 -#define BED_MAXTEMP 150 +#define BED_MAXTEMP 110 #define CHAMBER_MAXTEMP 60 /** @@ -505,21 +507,27 @@ #define PID_K1 0.95 // Smoothing factor within any PID loop #if ENABLED(PIDTEMP) - //#define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) - //#define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) + #define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) + #define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) // Set/get with gcode: M301 E[extruder number, 0-2] #if ENABLED(PID_PARAMS_PER_HOTEND) // Specify between 1 and HOTENDS values per array. // If fewer than EXTRUDER values are provided, the last element will be repeated. - #define DEFAULT_Kp_LIST { 22.20, 22.20 } - #define DEFAULT_Ki_LIST { 1.08, 1.08 } - #define DEFAULT_Kd_LIST { 114.00, 114.00 } + #define DEFAULT_Kp_LIST { 18.62, 18.62 } + #define DEFAULT_Ki_LIST { 1.38, 1.38 } + #define DEFAULT_Kd_LIST { 62.92, 62.92 } #else - #define DEFAULT_Kp 22.20 - #define DEFAULT_Ki 1.08 - #define DEFAULT_Kd 114.00 + // ET4 Default settings + //#define DEFAULT_Kp 40.00 + //#define DEFAULT_Ki 0.70 + //#define DEFAULT_Kd 50.00 + + // ET4 Autotune PID results + #define DEFAULT_Kp 18.62 + #define DEFAULT_Ki 1.38 + #define DEFAULT_Kd 62.92 #endif #endif // PIDTEMP @@ -540,7 +548,7 @@ * heater. If your configuration is significantly different than this and you don't understand * the issues involved, don't use bed PID until someone else verifies that your hardware works. */ -//#define PIDTEMPBED +#define PIDTEMPBED //#define BED_LIMIT_SWITCHING @@ -627,14 +635,14 @@ * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** */ #define PREVENT_COLD_EXTRUSION -#define EXTRUDE_MINTEMP 170 +#define EXTRUDE_MINTEMP 180 /** * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. * Note: For Bowden Extruders make this large enough to allow load/unload. */ #define PREVENT_LENGTHY_EXTRUDE -#define EXTRUDE_MAXLENGTH 200 +#define EXTRUDE_MAXLENGTH 350 //=========================================================================== //======================== Thermal Runaway Protection ======================= @@ -688,7 +696,7 @@ #define USE_ZMIN_PLUG //#define USE_XMAX_PLUG //#define USE_YMAX_PLUG -//#define USE_ZMAX_PLUG +#define USE_ZMAX_PLUG // Enable pullup for all endstops to prevent a floating state #define ENDSTOPPULLUPS @@ -717,13 +725,13 @@ #endif // Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. +#define X_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Y_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Z_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. #define X_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. #define Y_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_PROBE_ENDSTOP_INVERTING false // Set to true to invert the logic of the probe. +#define Z_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Z_MIN_PROBE_ENDSTOP_INVERTING true // Set to true to invert the logic of the probe. /** * Stepper Drivers @@ -806,14 +814,14 @@ * Override with M92 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 500 } +#define DEFAULT_AXIS_STEPS_PER_UNIT { 80.4, 80.4, 403.1, 100.7 } /** * Default Max Feed Rate (mm/s) * Override with M203 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 } +#define DEFAULT_MAX_FEEDRATE { 300, 300, 50, 50 } //#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 #if ENABLED(LIMITED_MAX_FR_EDITING) @@ -826,7 +834,7 @@ * Override with M201 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 } +#define DEFAULT_MAX_ACCELERATION { 2000 , 2000, 100, 10000 } //#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 #if ENABLED(LIMITED_MAX_ACCEL_EDITING) @@ -841,9 +849,9 @@ * M204 R Retract Acceleration * M204 T Travel Acceleration */ -#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves +#define DEFAULT_ACCELERATION 800 // X, Y, Z and E acceleration for printing moves #define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves +#define DEFAULT_TRAVEL_ACCELERATION 1500 // X, Y, Z acceleration for travel (non printing) moves /** * Default Jerk limits (mm/s) @@ -890,7 +898,7 @@ * * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained */ -//#define S_CURVE_ACCELERATION +#define S_CURVE_ACCELERATION //=========================================================================== //============================= Z Probe Options ============================= @@ -906,10 +914,10 @@ * The probe replaces the Z-MIN endstop and is used for Z homing. * (Automatically enables USE_PROBE_FOR_Z_HOMING.) */ -#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN +//#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN // Force the use of the probe for Z-axis homing -//#define USE_PROBE_FOR_Z_HOMING +#define USE_PROBE_FOR_Z_HOMING /** * Z_MIN_PROBE_PIN @@ -946,7 +954,7 @@ * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. * (e.g., an inductive probe or a nozzle-based probe-switch.) */ -//#define FIX_MOUNTED_PROBE +#define FIX_MOUNTED_PROBE /** * Use the nozzle as the probe, as with a conductive @@ -1055,20 +1063,20 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +#define NOZZLE_TO_PROBE_OFFSET { -25, -8.5, 0 } // Most probes should stay away from the edges of the bed, but // with NOZZLE_AS_PROBE this can be negative for a wider probing area. -#define PROBING_MARGIN 10 +#define PROBING_MARGIN 25 // X and Y axis travel speed (mm/min) between probes -#define XY_PROBE_FEEDRATE (133*60) +#define XY_PROBE_FEEDRATE (66*60) // Feedrate (mm/min) for the first approach when double-probing (MULTIPLE_PROBING == 2) -#define Z_PROBE_FEEDRATE_FAST (4*60) +#define Z_PROBE_FEEDRATE_FAST (10*60) // Feedrate (mm/min) for the "accurate" probe of each point -#define Z_PROBE_FEEDRATE_SLOW (Z_PROBE_FEEDRATE_FAST / 2) +#define Z_PROBE_FEEDRATE_SLOW (Z_PROBE_FEEDRATE_FAST / 4) /** * Probe Activation Switch @@ -1106,7 +1114,7 @@ * A total of 2 does fast/slow probes with a weighted average. * A total of 3 or more adds more slow probes, taking the average. */ -//#define MULTIPLE_PROBING 2 +#define MULTIPLE_PROBING 3 //#define EXTRA_PROBING 1 /** @@ -1190,9 +1198,9 @@ // @section machine // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR false -#define INVERT_Y_DIR true -#define INVERT_Z_DIR false +#define INVERT_X_DIR true +#define INVERT_Y_DIR false +#define INVERT_Z_DIR true // @section extruder @@ -1232,8 +1240,8 @@ // @section machine // The size of the printable area -#define X_BED_SIZE 200 -#define Y_BED_SIZE 200 +#define X_BED_SIZE 220 +#define Y_BED_SIZE 220 // Travel limits (mm) after homing, corresponding to endstop positions. #define X_MIN_POS 0 @@ -1241,7 +1249,7 @@ #define Z_MIN_POS 0 #define X_MAX_POS X_BED_SIZE #define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 200 +#define Z_MAX_POS 250 /** * Software Endstops @@ -1269,7 +1277,7 @@ #endif #if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS) - //#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD + #define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD #endif /** @@ -1285,7 +1293,7 @@ * RAMPS-based boards use SERVO3_PIN for the first runout sensor. * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. */ -//#define FILAMENT_RUNOUT_SENSOR +#define FILAMENT_RUNOUT_SENSOR #if ENABLED(FILAMENT_RUNOUT_SENSOR) #define FIL_RUNOUT_ENABLED_DEFAULT true // Enable the sensor on startup. Override with M412 followed by M500. #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. @@ -1387,7 +1395,7 @@ */ //#define AUTO_BED_LEVELING_3POINT //#define AUTO_BED_LEVELING_LINEAR -//#define AUTO_BED_LEVELING_BILINEAR +#define AUTO_BED_LEVELING_BILINEAR //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING @@ -1396,7 +1404,7 @@ * these options to restore the prior leveling state or to always enable * leveling immediately after G28. */ -//#define RESTORE_LEVELING_AFTER_G28 +#define RESTORE_LEVELING_AFTER_G28 //#define ENABLE_LEVELING_AFTER_G28 /** @@ -1438,15 +1446,15 @@ /** * Enable the G26 Mesh Validation Pattern tool. */ - //#define G26_MESH_VALIDATION + #define G26_MESH_VALIDATION #if ENABLED(G26_MESH_VALIDATION) #define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle. #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for G26. - #define MESH_TEST_HOTEND_TEMP 205 // (°C) Default nozzle temperature for G26. + #define MESH_TEST_HOTEND_TEMP 210 // (°C) Default nozzle temperature for G26. #define MESH_TEST_BED_TEMP 60 // (°C) Default bed temperature for G26. #define G26_XY_FEEDRATE 20 // (mm/s) Feedrate for G26 XY moves. #define G26_XY_FEEDRATE_TRAVEL 100 // (mm/s) Feedrate for G26 XY travel moves. - #define G26_RETRACT_MULTIPLIER 1.0 // G26 Q (retraction) used by default between mesh test elements. + #define G26_RETRACT_MULTIPLIER 1.5 // G26 Q (retraction) used by default between mesh test elements. #endif #endif @@ -1518,7 +1526,7 @@ * Add a bed leveling sub-menu for ABL or MBL. * Include a guided procedure if manual probing is enabled. */ -//#define LCD_BED_LEVELING +#define LCD_BED_LEVELING #if ENABLED(LCD_BED_LEVELING) #define MESH_EDIT_Z_STEP 0.025 // (mm) Step size while manually probing Z axis. @@ -1527,13 +1535,13 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS +#define LEVEL_BED_CORNERS #if ENABLED(LEVEL_BED_CORNERS) #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points + #define LEVEL_CORNERS_HEIGHT 0.05 // (mm) Z height of nozzle at leveling points #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner + #define LEVEL_CENTER_TOO // Move to the center after the last corner //#define LEVEL_CORNERS_USE_PROBE #if ENABLED(LEVEL_CORNERS_USE_PROBE) #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 @@ -1587,7 +1595,7 @@ // - Move the Z probe (or nozzle) to a defined XY point before Z Homing. // - Prevent Z homing when the Z probe is outside bed area. // -//#define Z_SAFE_HOMING +#define Z_SAFE_HOMING #if ENABLED(Z_SAFE_HOMING) #define Z_SAFE_HOMING_X_POINT X_CENTER // X point for Z homing @@ -1595,7 +1603,7 @@ #endif // Homing speeds (mm/min) -#define HOMING_FEEDRATE_MM_M { (50*60), (50*60), (4*60) } +#define HOMING_FEEDRATE_MM_M { (50*60), (50*60), (10*60) } // Validate that endstops are triggered on homing moves #define VALIDATE_HOMING_ENDSTOPS @@ -1672,12 +1680,12 @@ * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) */ -//#define EEPROM_SETTINGS // Persistent storage with M500 and M501 +#define EEPROM_SETTINGS // Persistent storage with M500 and M501 //#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. #define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load #if ENABLED(EEPROM_SETTINGS) - //#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. + #define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. #endif // @@ -1706,17 +1714,23 @@ // Preheat Constants - Up to 5 are supported without changes // #define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 180 +#define PREHEAT_1_TEMP_HOTEND 210 #define PREHEAT_1_TEMP_BED 70 #define PREHEAT_1_TEMP_CHAMBER 35 #define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 -#define PREHEAT_2_LABEL "ABS" +#define PREHEAT_2_LABEL "PETG" #define PREHEAT_2_TEMP_HOTEND 240 -#define PREHEAT_2_TEMP_BED 110 +#define PREHEAT_2_TEMP_BED 80 #define PREHEAT_2_TEMP_CHAMBER 35 #define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 +#define PREHEAT_3_LABEL "ABS" +#define PREHEAT_3_TEMP_HOTEND 240 +#define PREHEAT_3_TEMP_BED 110 +#define PREHEAT_3_TEMP_CHAMBER 35 +#define PREHEAT_3_FAN_SPEED 0 // Value from 0 to 255 + /** * Nozzle Park * @@ -1728,7 +1742,7 @@ * P1 Raise the nozzle always to Z-park height. * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. */ -//#define NOZZLE_PARK_FEATURE +#define NOZZLE_PARK_FEATURE #if ENABLED(NOZZLE_PARK_FEATURE) // Specify a park position as { X, Y, Z_raise } @@ -1936,14 +1950,14 @@ * SD Card support is disabled by default. If your controller has an SD slot, * you must uncomment the following option or it won't work. */ -//#define SDSUPPORT +#define SDSUPPORT /** * SD CARD: ENABLE CRC * * Use CRC checks and retries on the SD communication. */ -//#define SD_CHECK_AND_RETRY +#define SD_CHECK_AND_RETRY /** * LCD Menu Items @@ -2006,7 +2020,7 @@ // // Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. // -//#define INDIVIDUAL_AXIS_HOMING_MENU +#define INDIVIDUAL_AXIS_HOMING_MENU // // SPEAKER/BUZZER @@ -2503,7 +2517,7 @@ // // 320x240, 2.8", FSMC Stock Display from ET4 // -//#define ANET_ET4_TFT28 +#define ANET_ET4_TFT28 // // 480x320, 3.5", FSMC Stock Display from ET5 @@ -2544,12 +2558,39 @@ * root of your SD card, together with the compiled firmware. */ //#define TFT_CLASSIC_UI -//#define TFT_COLOR_UI +#define TFT_COLOR_UI //#define TFT_LVGL_UI -#if ENABLED(TFT_LVGL_UI) - //#define MKS_WIFI_MODULE // MKS WiFi module -#endif +/* ET4/ET5 Black Theme */ + +#define COLOR_RED2 0xF003 // #F70019 +#define COLOR_ORANGE2 0xFDE0 // #FFBE00 +#define COLOR_LIME2 0xA7E0 // #A5FF00 +#define COLOR_BLACK2 0x2124 // #212421 + +#define COLOR_BACKGROUND COLOR_BLACK2 +#define COLOR_SELECTION_BG COLOR_ORANGE2 +#define COLOR_COLD COLOR_WHITE +#define COLOR_HOTEND COLOR_RED2 +#define COLOR_HEATED_BED COLOR_RED2 +#define COLOR_CHAMBER COLOR_WHITE +#define COLOR_FAN COLOR_WHITE +#define COLOR_AXIS_FRAME COLOR_WHITE +#define COLOR_AXIS_HOMED COLOR_ORANGE2 +#define COLOR_AXIS_NOT_HOMED COLOR_ORANGE2 +#define COLOR_RATE_100 COLOR_LIME2 +#define COLOR_RATE_ALTERED COLOR_ORANGE2 +#define COLOR_PRINT_TIME COLOR_WHITE +#define COLOR_PROGRESS_BAR COLOR_ORANGE2 +#define COLOR_STATUS_MESSAGE COLOR_ORANGE2 +#define COLOR_SD_ENABLED COLOR_CONTROL_ENABLED +#define COLOR_SD_DISABLED COLOR_CONTROL_DISABLED +#define COLOR_MENU_TEXT COLOR_WHITE +#define COLOR_MENU_VALUE_FONT COLOR_ORANGE2 +#define COLOR_SLIDER COLOR_ORANGE2 +#define COLOR_INCREASE COLOR_WHITE +#define COLOR_DECREASE COLOR_WHITE +#define COLOR_TICK COLOR_VIVID_GREEN /** * TFT Rotation. Set to one of the following values: @@ -2573,18 +2614,18 @@ // // Touch Screen Settings // -//#define TOUCH_SCREEN +#define TOUCH_SCREEN #if ENABLED(TOUCH_SCREEN) #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus #define TOUCH_SCREEN_CALIBRATION - //#define TOUCH_CALIBRATION_X 12316 - //#define TOUCH_CALIBRATION_Y -8981 - //#define TOUCH_OFFSET_X -43 - //#define TOUCH_OFFSET_Y 257 - //#define TOUCH_ORIENTATION TOUCH_LANDSCAPE + //#define TOUCH_CALIBRATION_X -11838 + //#define TOUCH_CALIBRATION_Y 8776 + //#define TOUCH_OFFSET_X 333 + //#define TOUCH_OFFSET_Y -17 + //#define TOUCH_ORIENTATION TOUCH_PORTRAIT #if BOTH(TOUCH_SCREEN_CALIBRATION, EEPROM_SETTINGS) #define TOUCH_CALIBRATION_AUTO_SAVE // Auto save successful calibration values to EEPROM @@ -2618,7 +2659,7 @@ // Use software PWM to drive the fan, as for the heaters. This uses a very low frequency // which is not as annoying as with the hardware PWM. On the other hand, if this frequency // is too low, you should also increment SOFT_PWM_SCALE. -//#define FAN_SOFT_PWM +#define FAN_SOFT_PWM // Incrementing this by 1 will double the software PWM frequency, // affecting heaters, and the fan if FAN_SOFT_PWM is enabled. diff --git a/config/examples/Labists/ET4/Configuration_adv.h b/config/examples/Labists/ET4/Configuration_adv.h index 5335fa012a..78c91ccc77 100644 --- a/config/examples/Labists/ET4/Configuration_adv.h +++ b/config/examples/Labists/ET4/Configuration_adv.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Labists/ET4" + /** * Configuration_adv.h * @@ -437,7 +439,7 @@ * Hotend Idle Timeout * Prevent filament in the nozzle from charring and causing a critical jam. */ -//#define HOTEND_IDLE_TIMEOUT +#define HOTEND_IDLE_TIMEOUT #if ENABLED(HOTEND_IDLE_TIMEOUT) #define HOTEND_IDLE_TIMEOUT_SEC (5*60) // (seconds) Time without extruder movement to trigger protection #define HOTEND_IDLE_MIN_TRIGGER 180 // (°C) Minimum temperature to enable hotend protection @@ -540,7 +542,7 @@ * Multiple extruders can be assigned to the same pin in which case * the fan will turn on when any selected extruder is above the threshold. */ -#define E0_AUTO_FAN_PIN -1 +//#define E0_AUTO_FAN_PIN -1 #define E1_AUTO_FAN_PIN -1 #define E2_AUTO_FAN_PIN -1 #define E3_AUTO_FAN_PIN -1 @@ -741,7 +743,7 @@ //#define HOMING_BACKOFF_POST_MM { 2, 2, 2 } // (mm) Backoff from endstops after homing -//#define QUICK_HOME // If G28 contains XY do a diagonal move first +#define QUICK_HOME // If G28 contains XY do a diagonal move first //#define HOME_Y_BEFORE_X // If G28 contains XY home Y before X //#define HOME_Z_FIRST // Home Z first. Requires a Z-MIN endstop (not a probe). //#define CODEPENDENT_XY_HOMING // If X/Y can't home without homing Y/X first @@ -951,7 +953,7 @@ * See https://hydraraptor.blogspot.com/2010/12/frequency-limit.html * Use M201 F G to change limits at runtime. */ -//#define XY_FREQUENCY_LIMIT 10 // (Hz) Maximum frequency of small zigzag infill moves. Set with M201 F. +#define XY_FREQUENCY_LIMIT 10 // (Hz) Maximum frequency of small zigzag infill moves. Set with M201 F. #ifdef XY_FREQUENCY_LIMIT #define XY_FREQUENCY_MIN_PERCENT 5 // (percent) Minimum FR percentage to apply. Set with M201 G. #endif @@ -1175,7 +1177,7 @@ #endif // Include a page of printer information in the LCD Main Menu - //#define LCD_INFO_MENU + #define LCD_INFO_MENU #if ENABLED(LCD_INFO_MENU) //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages #endif @@ -1229,7 +1231,7 @@ #endif // Scroll a longer status message into view - //#define STATUS_MESSAGE_SCROLLING + #define STATUS_MESSAGE_SCROLLING // On the Info Screen, display XY with one decimal place when possible //#define LCD_DECIMAL_SMALL_XY @@ -1238,14 +1240,14 @@ //#define LCD_SET_PROGRESS_MANUALLY // Show the E position (filament used) during printing - //#define LCD_SHOW_E_TOTAL + #define LCD_SHOW_E_TOTAL #endif #if EITHER(SDSUPPORT, LCD_SET_PROGRESS_MANUALLY) && ANY(HAS_MARLINUI_U8GLIB, HAS_MARLINUI_HD44780, IS_TFTGLCD_PANEL, EXTENSIBLE_UI) - //#define SHOW_REMAINING_TIME // Display estimated time to completion + #define SHOW_REMAINING_TIME // Display estimated time to completion #if ENABLED(SHOW_REMAINING_TIME) //#define USE_M73_REMAINING_TIME // Use remaining time from M73 command instead of estimation - //#define ROTATE_PROGRESS_DISPLAY // Display (P)rogress, (E)lapsed, and (R)emaining time + #define ROTATE_PROGRESS_DISPLAY // Display (P)rogress, (E)lapsed, and (R)emaining time #endif #if EITHER(HAS_MARLINUI_U8GLIB, EXTENSIBLE_UI) @@ -1315,13 +1317,13 @@ * an option on the LCD screen to continue the print from the last-known * point in the file. */ - //#define POWER_LOSS_RECOVERY + #define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) //#define BACKUP_POWER_SUPPLY // Backup power / UPS to move the steppers on power loss //#define POWER_LOSS_ZRAISE 2 // (mm) Z axis raise on resume (on power loss with UPS) //#define POWER_LOSS_PIN 44 // Pin to detect power loss. Set to -1 to disable default pin on boards without module. - //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss + #define POWER_LOSS_STATE LOW // State of pin indicating power loss //#define POWER_LOSS_PULLUP // Set pullup / pulldown as appropriate for your sensor //#define POWER_LOSS_PULLDOWN //#define POWER_LOSS_PURGE_LEN 20 // (mm) Length of filament to purge on resume @@ -1381,10 +1383,10 @@ //#define UTF_FILENAME_SUPPORT // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT + #define LONG_FILENAME_HOST_SUPPORT // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES + #define SCROLL_LONG_FILENAMES // Leave the heaters on after Stop Print (not recommended!) //#define SD_ABORT_NO_COOLDOWN @@ -1394,7 +1396,7 @@ * This feature must be enabled with "M540 S1" or from the LCD menu. * To have any effect, endstops must be enabled during SD printing. */ - //#define SD_ABORT_ON_ENDSTOP_HIT + #define SD_ABORT_ON_ENDSTOP_HIT /** * This option makes it easier to print the same SD Card file again. @@ -1790,7 +1792,7 @@ * * Warning: Does not respect endstops! */ -//#define BABYSTEPPING +#define BABYSTEPPING #if ENABLED(BABYSTEPPING) //#define INTEGRATED_BABYSTEPPING // EXPERIMENTAL integration of babystepping into the Stepper ISR //#define BABYSTEP_WITHOUT_HOMING @@ -1801,7 +1803,7 @@ #define BABYSTEP_MULTIPLICATOR_Z 1 // (steps or mm) Steps or millimeter distance for each Z babystep #define BABYSTEP_MULTIPLICATOR_XY 1 // (steps or mm) Steps or millimeter distance for each XY babystep - //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. + #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. // Note: Extra time may be added to mitigate controller latency. @@ -1813,7 +1815,7 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 - //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping + #define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping #if ENABLED(BABYSTEP_ZPROBE_OFFSET) //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor @@ -2311,14 +2313,14 @@ * * Enable PARK_HEAD_ON_PAUSE to add the G-code M125 Pause and Park. */ -//#define ADVANCED_PAUSE_FEATURE +#define ADVANCED_PAUSE_FEATURE #if ENABLED(ADVANCED_PAUSE_FEATURE) #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. // This short retract is done immediately, before parking the nozzle. #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast. #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload. + #define FILAMENT_CHANGE_UNLOAD_LENGTH 350 // (mm) The length of filament for a complete unload. // For Bowden, the full length of the tube and nozzle. // For direct drive, the full length of the nozzle. // Set to 0 for manual unloading. @@ -2327,7 +2329,7 @@ // 0 to disable start loading and skip to fast load only #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast. #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle. + #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 350 // (mm) Load length of filament, from extruder gear to nozzle. // For Bowden, the full length of the tube and nozzle. // For direct drive, the full length of the nozzle. //#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted. @@ -2352,7 +2354,7 @@ //#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. //#define HOME_BEFORE_FILAMENT_CHANGE // If needed, home before parking for filament change - //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. + #define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) #endif @@ -2719,7 +2721,7 @@ * Define your own with: * { , , hysteresis_start[1..8] } */ - #define CHOPPER_TIMING CHOPPER_DEFAULT_12V // All axes (override below) + #define CHOPPER_TIMING CHOPPER_DEFAULT_24V // All axes (override below) //#define CHOPPER_TIMING_X CHOPPER_TIMING // For X Axes (override below) //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X //#define CHOPPER_TIMING_Y CHOPPER_TIMING // For Y Axes (override below) @@ -2748,7 +2750,7 @@ * M912 - Clear stepper driver overtemperature pre-warn condition flag. * M122 - Report driver parameters (Requires TMC_DEBUG) */ - //#define MONITOR_DRIVER_STATUS + #define MONITOR_DRIVER_STATUS #if ENABLED(MONITOR_DRIVER_STATUS) #define CURRENT_STEP_DOWN 50 // [mA] @@ -2845,7 +2847,7 @@ * Enable M122 debugging command for TMC stepper drivers. * M122 S0/1 will enable continuous reporting. */ - //#define TMC_DEBUG + #define TMC_DEBUG /** * You can set your own advanced settings by filling in predefined functions. @@ -3414,7 +3416,7 @@ /** * Auto-report temperatures with M155 S */ -#define AUTO_REPORT_TEMPERATURES +//#define AUTO_REPORT_TEMPERATURES /** * Auto-report position with M154 S diff --git a/config/examples/MBot/Cube/Configuration.h b/config/examples/MBot/Cube/Configuration.h index 78c2dc9160..161043691a 100644 --- a/config/examples/MBot/Cube/Configuration.h +++ b/config/examples/MBot/Cube/Configuration.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "MBot/Cube" + /** * Configuration.h * @@ -69,7 +71,7 @@ // @section info // Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes. +#define STRING_CONFIG_H_AUTHOR "M. Baker" // Who made the changes. //#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) /** @@ -84,7 +86,7 @@ */ // Show the Marlin bootscreen on startup. ** ENABLE FOR PRODUCTION ** -#define SHOW_BOOTSCREEN +//#define SHOW_BOOTSCREEN // Show the bitmap in Marlin/_Bootscreen.h on startup. //#define SHOW_CUSTOM_BOOTSCREEN @@ -134,11 +136,11 @@ // Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_RAMPS_14_EFB + #define MOTHERBOARD BOARD_MIGHTYBOARD_REVE #endif // Name displayed in the LCD "Ready" message and Info menu -//#define CUSTOM_MACHINE_NAME "3D Printer" +#define CUSTOM_MACHINE_NAME "CreatorPro" // Printer's unique ID, used by some programs to differentiate between machines. // Choose your own or use a service like https://www.uuidgenerator.net/version4 @@ -148,7 +150,7 @@ // This defines the number of extruders // :[0, 1, 2, 3, 4, 5, 6, 7, 8] -#define EXTRUDERS 1 +#define EXTRUDERS 2 // Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc. #define DEFAULT_NOMINAL_FILAMENT_DIA 1.75 @@ -306,8 +308,8 @@ // Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing). // The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder). // For the other hotends it is their distance from the extruder 0 hotend. -//#define HOTEND_OFFSET_X { 0.0, 20.00 } // (mm) relative X-offset for each nozzle -//#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle +//#define HOTEND_OFFSET_X { 0.0, -34.00 } // (mm) relative X-offset for each nozzle +//#define HOTEND_OFFSET_Y { 0.0, 0.00 } // (mm) relative Y-offset for each nozzle //#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle // @section machine @@ -416,15 +418,15 @@ * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. */ -#define TEMP_SENSOR_0 1 -#define TEMP_SENSOR_1 0 +#define TEMP_SENSOR_0 -2 +#define TEMP_SENSOR_1 -2 #define TEMP_SENSOR_2 0 #define TEMP_SENSOR_3 0 #define TEMP_SENSOR_4 0 #define TEMP_SENSOR_5 0 #define TEMP_SENSOR_6 0 #define TEMP_SENSOR_7 0 -#define TEMP_SENSOR_BED 0 +#define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 #define TEMP_SENSOR_COOLER 0 @@ -444,11 +446,11 @@ //#define TEMP_SENSOR_1_AS_REDUNDANT #define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10 -#define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 +#define TEMP_RESIDENCY_TIME 0 // (seconds) Time to wait for hotend to "settle" in M109 #define TEMP_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer #define TEMP_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target -#define TEMP_BED_RESIDENCY_TIME 10 // (seconds) Time to wait for bed to "settle" in M190 +#define TEMP_BED_RESIDENCY_TIME 0 // (seconds) Time to wait for bed to "settle" in M190 #define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer #define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target @@ -513,13 +515,13 @@ #if ENABLED(PID_PARAMS_PER_HOTEND) // Specify between 1 and HOTENDS values per array. // If fewer than EXTRUDER values are provided, the last element will be repeated. - #define DEFAULT_Kp_LIST { 22.20, 22.20 } - #define DEFAULT_Ki_LIST { 1.08, 1.08 } - #define DEFAULT_Kd_LIST { 114.00, 114.00 } + #define DEFAULT_Kp_LIST { 20.03, 20.03 } + #define DEFAULT_Ki_LIST { 1.22, 1.22 } + #define DEFAULT_Kd_LIST { 82.05, 82.05 } #else - #define DEFAULT_Kp 22.20 - #define DEFAULT_Ki 1.08 - #define DEFAULT_Kd 114.00 + #define DEFAULT_Kp 20.03 + #define DEFAULT_Ki 1.22 + #define DEFAULT_Kd 82.05 #endif #endif // PIDTEMP @@ -613,7 +615,7 @@ //#define PID_DEBUG // Sends debug data to the serial port. Use 'M303 D' to toggle activation. //#define PID_OPENLOOP // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX //#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay - #define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature + #define PID_FUNCTIONAL_RANGE 15 // If the temperature difference between the target temperature and the actual temperature // is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max. #endif @@ -655,7 +657,7 @@ #define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders #define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed -#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber +//#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber #define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling //=========================================================================== @@ -683,11 +685,11 @@ // Specify here all the endstop connectors that are connected to any endstop or probe. // Almost all printers will be using one per axis. Probes will use one or more of the // extra connectors. Leave undefined any used for non-endstop and non-probe purposes. -#define USE_XMIN_PLUG -#define USE_YMIN_PLUG +//#define USE_XMIN_PLUG +//#define USE_YMIN_PLUG #define USE_ZMIN_PLUG -//#define USE_XMAX_PLUG -//#define USE_YMAX_PLUG +#define USE_XMAX_PLUG +#define USE_YMAX_PLUG //#define USE_ZMAX_PLUG // Enable pullup for all endstops to prevent a floating state @@ -719,9 +721,9 @@ // Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). #define X_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. #define Y_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define X_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. +#define Z_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define X_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Y_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. #define Z_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. #define Z_MIN_PROBE_ENDSTOP_INVERTING false // Set to true to invert the logic of the probe. @@ -752,7 +754,7 @@ //#define Z3_DRIVER_TYPE A4988 //#define Z4_DRIVER_TYPE A4988 #define E0_DRIVER_TYPE A4988 -//#define E1_DRIVER_TYPE A4988 +#define E1_DRIVER_TYPE A4988 //#define E2_DRIVER_TYPE A4988 //#define E3_DRIVER_TYPE A4988 //#define E4_DRIVER_TYPE A4988 @@ -806,14 +808,16 @@ * Override with M92 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 500 } +// Really Sailfish... got enough precision on that float for an 8 bit system? +// I'm leaving this in for the sake of posterity. +#define DEFAULT_AXIS_STEPS_PER_UNIT { 94.139704, 94.139704, 400, 96.275201870333662468889989185642 } /** * Default Max Feed Rate (mm/s) * Override with M203 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 } +#define DEFAULT_MAX_FEEDRATE { 250, 250, 20, 100 } //#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 #if ENABLED(LIMITED_MAX_FR_EDITING) @@ -826,7 +830,7 @@ * Override with M201 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 } +#define DEFAULT_MAX_ACCELERATION { 1000, 1000, 100, 5000 } //#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 #if ENABLED(LIMITED_MAX_ACCEL_EDITING) @@ -841,9 +845,9 @@ * M204 R Retract Acceleration * M204 T Travel Acceleration */ -#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves +#define DEFAULT_ACCELERATION 250 // X, Y, Z and E acceleration for printing moves +#define DEFAULT_RETRACT_ACCELERATION 5000 // E acceleration for retracts +#define DEFAULT_TRAVEL_ACCELERATION 500 // X, Y, Z acceleration for travel (non printing) moves /** * Default Jerk limits (mm/s) @@ -867,7 +871,7 @@ #endif #endif -#define DEFAULT_EJERK 5.0 // May be used by Linear Advance +#define DEFAULT_EJERK 2.0 // May be used by Linear Advance /** * Junction Deviation Factor @@ -877,7 +881,7 @@ * https://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html */ #if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.013 // (mm) Distance from real junction edge + #define JUNCTION_DEVIATION_MM 0.64 // (mm) Distance from real junction edge #define JD_HANDLE_SMALL_SEGMENTS // Use curvature estimation instead of just the junction angle // for small segments (< 1mm) with large junction angles (> 135°). #endif @@ -1190,14 +1194,14 @@ // @section machine // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR false +#define INVERT_X_DIR true #define INVERT_Y_DIR true -#define INVERT_Z_DIR false +#define INVERT_Z_DIR true // @section extruder // For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR false +#define INVERT_E0_DIR true #define INVERT_E1_DIR false #define INVERT_E2_DIR false #define INVERT_E3_DIR false @@ -1225,8 +1229,8 @@ // Direction of endstops when homing; 1=MAX, -1=MIN // :[-1,1] -#define X_HOME_DIR -1 -#define Y_HOME_DIR -1 +#define X_HOME_DIR 1 +#define Y_HOME_DIR 1 #define Z_HOME_DIR -1 // @section machine @@ -1239,9 +1243,9 @@ #define X_MIN_POS 0 #define Y_MIN_POS 0 #define Z_MIN_POS 0 -#define X_MAX_POS X_BED_SIZE -#define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 200 +#define X_MAX_POS X_BED_SIZE +30 +#define Y_MAX_POS Y_BED_SIZE + 5 +#define Z_MAX_POS 180 /** * Software Endstops @@ -1570,7 +1574,7 @@ // @section homing // The center of the bed is at (X=0, Y=0) -//#define BED_CENTER_AT_0_0 +#define BED_CENTER_AT_0_0 // Manually set the home position. Leave these undefined for automatic settings. // For DELTA this is the top-center of the Cartesian print volume. @@ -1672,12 +1676,12 @@ * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) */ -//#define EEPROM_SETTINGS // Persistent storage with M500 and M501 -//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! +#define EEPROM_SETTINGS // Persistent storage with M500 and M501 +#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. #define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load #if ENABLED(EEPROM_SETTINGS) - //#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. + #define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. #endif // @@ -1706,14 +1710,14 @@ // Preheat Constants - Up to 5 are supported without changes // #define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 180 -#define PREHEAT_1_TEMP_BED 70 +#define PREHEAT_1_TEMP_HOTEND 200 +#define PREHEAT_1_TEMP_BED 50 #define PREHEAT_1_TEMP_CHAMBER 35 #define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 #define PREHEAT_2_LABEL "ABS" -#define PREHEAT_2_TEMP_HOTEND 240 -#define PREHEAT_2_TEMP_BED 110 +#define PREHEAT_2_TEMP_HOTEND 220 +#define PREHEAT_2_TEMP_BED 100 #define PREHEAT_2_TEMP_CHAMBER 35 #define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 @@ -1786,10 +1790,9 @@ // Default number of triangles #define NOZZLE_CLEAN_TRIANGLES 3 - // Specify positions for each tool as { { X, Y, Z }, { X, Y, Z } } - // Dual hotend system may use { { -20, (Y_BED_SIZE / 2), (Z_MIN_POS + 1) }, { 420, (Y_BED_SIZE / 2), (Z_MIN_POS + 1) }} - #define NOZZLE_CLEAN_START_POINT { { 30, 30, (Z_MIN_POS + 1) } } - #define NOZZLE_CLEAN_END_POINT { { 100, 60, (Z_MIN_POS + 1) } } + // Specify positions as { X, Y, Z } + #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1) } + #define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) } // Circular pattern radius #define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5 @@ -1936,14 +1939,14 @@ * SD Card support is disabled by default. If your controller has an SD slot, * you must uncomment the following option or it won't work. */ -//#define SDSUPPORT +#define SDSUPPORT /** * SD CARD: ENABLE CRC * * Use CRC checks and retries on the SD communication. */ -//#define SD_CHECK_AND_RETRY +#define SD_CHECK_AND_RETRY /** * LCD Menu Items @@ -1952,7 +1955,7 @@ * just remove some extraneous menu items to recover space. */ //#define NO_LCD_MENUS -//#define SLIM_LCD_MENUS +#define SLIM_LCD_MENUS // // ENCODER SETTINGS @@ -1991,7 +1994,7 @@ // If CLOCKWISE normally moves DOWN this makes it go UP. // If CLOCKWISE normally moves UP this makes it go DOWN. // -//#define REVERSE_MENU_DIRECTION +#define REVERSE_MENU_DIRECTION // // This option reverses the encoder direction for Select Screen. @@ -2167,7 +2170,7 @@ // https://github.com/mikeshub/SailfishLCD // Uses the code directly from Sailfish // -//#define FF_INTERFACEBOARD +#define FF_INTERFACEBOARD // // TFT GLCD Panel with Marlin UI diff --git a/config/examples/MBot/Cube/Configuration_adv.h b/config/examples/MBot/Cube/Configuration_adv.h index 5335fa012a..76f6b77e2e 100644 --- a/config/examples/MBot/Cube/Configuration_adv.h +++ b/config/examples/MBot/Cube/Configuration_adv.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "MBot/Cube" + /** * Configuration_adv.h * @@ -540,8 +542,8 @@ * Multiple extruders can be assigned to the same pin in which case * the fan will turn on when any selected extruder is above the threshold. */ -#define E0_AUTO_FAN_PIN -1 -#define E1_AUTO_FAN_PIN -1 +#define E0_AUTO_FAN_PIN EX1_FAN_PIN +#define E1_AUTO_FAN_PIN EX2_FAN_PIN #define E2_AUTO_FAN_PIN -1 #define E3_AUTO_FAN_PIN -1 #define E4_AUTO_FAN_PIN -1 @@ -928,7 +930,7 @@ #define DEFAULT_STEPPER_DEACTIVE_TIME 120 #define DISABLE_INACTIVE_X true #define DISABLE_INACTIVE_Y true -#define DISABLE_INACTIVE_Z true // Set 'false' if the nozzle could fall onto your printed part! +#define DISABLE_INACTIVE_Z false // Set 'false' if the nozzle could fall onto your printed part! #define DISABLE_INACTIVE_E true // Default Minimum Feedrates for printing and travel moves @@ -1102,14 +1104,14 @@ /** * I2C-based DIGIPOTs (e.g., Azteeg X3 Pro) */ -//#define DIGIPOT_MCP4018 // Requires https://github.com/felias-fogg/SlowSoftI2CMaster +#define DIGIPOT_MCP4018 // Requires https://github.com/felias-fogg/SlowSoftI2CMaster //#define DIGIPOT_MCP4451 #if EITHER(DIGIPOT_MCP4018, DIGIPOT_MCP4451) - #define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT:4 AZTEEG_X3_PRO:8 MKS_SBASE:5 MIGHTYBOARD_REVE:5 + #define DIGIPOT_I2C_NUM_CHANNELS 5 // 5DPRINT:4 AZTEEG_X3_PRO:8 MKS_SBASE:5 MIGHTYBOARD_REVE:5 // Actual motor currents in Amps. The number of entries must match DIGIPOT_I2C_NUM_CHANNELS. // These correspond to the physical drivers, so be mindful if the order is changed. - #define DIGIPOT_I2C_MOTOR_CURRENTS { 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0 } // AZTEEG_X3_PRO + #define DIGIPOT_I2C_MOTOR_CURRENTS { 0.84, 0.84, 0.4, 1.0, 1.0 } // MIGHTYBOARD_REVE //#define DIGIPOT_USE_RAW_VALUES // Use DIGIPOT_MOTOR_CURRENT raw wiper values (instead of A4988 motor currents) @@ -1123,7 +1125,7 @@ * AZTEEG_X5_MINI_WIFI 0x58 0x5C MCP4451 * MIGHTYBOARD_REVE 0x2F (0x5E) MCP4018 */ - //#define DIGIPOT_I2C_ADDRESS_A 0x2C // Unshifted slave address for first DIGIPOT + #define DIGIPOT_I2C_ADDRESS_A 0x2F // Unshifted slave address for first DIGIPOT //#define DIGIPOT_I2C_ADDRESS_B 0x2D // Unshifted slave address for second DIGIPOT #endif @@ -1138,7 +1140,7 @@ #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines #if IS_ULTIPANEL #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position" - #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen + //#define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen #endif #endif @@ -1196,11 +1198,11 @@ //#define NEO2_COLOR_PRESETS // Enable a second NeoPixel Preset Color menu option #if ENABLED(LED_COLOR_PRESETS) #define LED_USER_PRESET_RED 255 // User defined RED value - #define LED_USER_PRESET_GREEN 128 // User defined GREEN value - #define LED_USER_PRESET_BLUE 0 // User defined BLUE value + #define LED_USER_PRESET_GREEN 255 // User defined GREEN value + #define LED_USER_PRESET_BLUE 255 // User defined BLUE value #define LED_USER_PRESET_WHITE 255 // User defined WHITE value #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity - //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup + #define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup #endif #if ENABLED(NEO2_COLOR_PRESETS) #define NEO2_USER_PRESET_RED 255 // User defined RED value @@ -1278,7 +1280,7 @@ // The standard SD detect circuit reads LOW when media is inserted and HIGH when empty. // Enable this option and set to HIGH if your SD cards are incorrectly detected. - //#define SD_DETECT_STATE HIGH + #define SD_DETECT_STATE HIGH //#define SD_IGNORE_AT_STARTUP // Don't mount the SD card when starting up //#define SDCARD_READONLY // Read-only SD card (to save over 2K of flash) @@ -1301,7 +1303,7 @@ //#define BROWSE_MEDIA_ON_INSERT // Open the file browser when media is inserted - #define EVENT_GCODE_SD_ABORT "G28XY" // G-code to run on SD Abort Print (e.g., "G28XY" or "G27") + //#define EVENT_GCODE_SD_ABORT "G28XY" // G-code to run on SD Abort Print (e.g., "G28XY" or "G27") #if ENABLED(PRINTER_EVENT_LEDS) #define PE_LEDS_COMPLETED_TIME (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination @@ -2230,7 +2232,7 @@ */ #if HAS_MULTI_EXTRUDER // Z raise distance for tool-change, as needed for some extruders - #define TOOLCHANGE_ZRAISE 2 // (mm) + #define TOOLCHANGE_ZRAISE 0 // (mm) //#define TOOLCHANGE_ZRAISE_BEFORE_RETRACT // Apply raise before swap retraction (if enabled) //#define TOOLCHANGE_NO_RETURN // Never return to previous position on tool-change #if ENABLED(TOOLCHANGE_NO_RETURN) @@ -3526,7 +3528,7 @@ * * Execute certain G-code commands immediately after power-on. */ -//#define STARTUP_COMMANDS "M17 Z" +#define STARTUP_COMMANDS "M42 P16 S255" /** * G-code Macros diff --git a/config/examples/MakerFarm/Pegasus 12/Configuration.h b/config/examples/MakerFarm/Pegasus 12/Configuration.h index 78c2dc9160..af30f0e303 100644 --- a/config/examples/MakerFarm/Pegasus 12/Configuration.h +++ b/config/examples/MakerFarm/Pegasus 12/Configuration.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "MakerFarm/Pegasus 12" + /** * Configuration.h * @@ -134,7 +136,7 @@ // Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_RAMPS_14_EFB + #define MOTHERBOARD BOARD_RAMPS_13_EEB #endif // Name displayed in the LCD "Ready" message and Info menu @@ -148,13 +150,13 @@ // This defines the number of extruders // :[0, 1, 2, 3, 4, 5, 6, 7, 8] -#define EXTRUDERS 1 +#define EXTRUDERS 2 // Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc. #define DEFAULT_NOMINAL_FILAMENT_DIA 1.75 // For Cyclops or any "multi-extruder" that shares a single nozzle. -//#define SINGLENOZZLE +#define SINGLENOZZLE // Save and restore temperature and fan speed on tool-change. // Set standby for the unselected tool with M104/106/109 T... @@ -318,8 +320,8 @@ * Enable and connect the power supply to the PS_ON_PIN. * Specify whether the power supply is active HIGH or active LOW. */ -//#define PSU_CONTROL -//#define PSU_NAME "Power Supply" +#define PSU_CONTROL +#define PSU_NAME "Power Supply" #if ENABLED(PSU_CONTROL) #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box @@ -416,7 +418,7 @@ * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. */ -#define TEMP_SENSOR_0 1 +#define TEMP_SENSOR_0 5 #define TEMP_SENSOR_1 0 #define TEMP_SENSOR_2 0 #define TEMP_SENSOR_3 0 @@ -424,7 +426,7 @@ #define TEMP_SENSOR_5 0 #define TEMP_SENSOR_6 0 #define TEMP_SENSOR_7 0 -#define TEMP_SENSOR_BED 0 +#define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 #define TEMP_SENSOR_COOLER 0 @@ -444,11 +446,11 @@ //#define TEMP_SENSOR_1_AS_REDUNDANT #define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10 -#define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 +#define TEMP_RESIDENCY_TIME 5 // (seconds) Time to wait for hotend to "settle" in M109 #define TEMP_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer #define TEMP_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target -#define TEMP_BED_RESIDENCY_TIME 10 // (seconds) Time to wait for bed to "settle" in M190 +#define TEMP_BED_RESIDENCY_TIME 5 // (seconds) Time to wait for bed to "settle" in M190 #define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer #define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target @@ -505,8 +507,8 @@ #define PID_K1 0.95 // Smoothing factor within any PID loop #if ENABLED(PIDTEMP) - //#define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) - //#define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) + #define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) + #define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) // Set/get with gcode: M301 E[extruder number, 0-2] @@ -556,11 +558,17 @@ //#define MIN_BED_POWER 0 //#define PID_BED_DEBUG // Sends debug data to the serial port. - // 120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - // from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) - #define DEFAULT_bedKp 10.00 - #define DEFAULT_bedKi .023 - #define DEFAULT_bedKd 305.4 + // 120v 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) + // from pidautotune + //#define DEFAULT_bedKp 97.1 + //#define DEFAULT_bedKi 1.41 + //#define DEFAULT_bedKd 1675.16 + + // 12v 8" Maker Farm Heat bed with 4mm Glass + // from pidautotune + #define DEFAULT_bedKp 644.48 + #define DEFAULT_bedKi 117.07 + #define DEFAULT_bedKd 886.96 // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. #endif // PIDTEMPBED @@ -634,7 +642,7 @@ * Note: For Bowden Extruders make this large enough to allow load/unload. */ #define PREVENT_LENGTHY_EXTRUDE -#define EXTRUDE_MAXLENGTH 200 +#define EXTRUDE_MAXLENGTH 1000 //=========================================================================== //======================== Thermal Runaway Protection ======================= @@ -720,7 +728,7 @@ #define X_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. #define Y_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. #define Z_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define X_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. +#define X_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. #define Y_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. #define Z_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. #define Z_MIN_PROBE_ENDSTOP_INVERTING false // Set to true to invert the logic of the probe. @@ -752,7 +760,7 @@ //#define Z3_DRIVER_TYPE A4988 //#define Z4_DRIVER_TYPE A4988 #define E0_DRIVER_TYPE A4988 -//#define E1_DRIVER_TYPE A4988 +#define E1_DRIVER_TYPE A4988 //#define E2_DRIVER_TYPE A4988 //#define E3_DRIVER_TYPE A4988 //#define E4_DRIVER_TYPE A4988 @@ -799,25 +807,25 @@ * following movement settings. If fewer factors are given than the * total number of extruders, the last value applies to the rest. */ -//#define DISTINCT_E_FACTORS +#define DISTINCT_E_FACTORS /** * Default Axis Steps Per Unit (steps/mm) * Override with M92 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 500 } +#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 4000, 510, 510 } /** * Default Max Feed Rate (mm/s) * Override with M203 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 } +#define DEFAULT_MAX_FEEDRATE { 300, 300, 3, 30 } -//#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 +#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 #if ENABLED(LIMITED_MAX_FR_EDITING) - #define MAX_FEEDRATE_EDIT_VALUES { 600, 600, 10, 50 } // ...or, set your own edit limits + #define MAX_FEEDRATE_EDIT_VALUES { 600, 600, 6, 60 } // ...or, set your own edit limits #endif /** @@ -828,7 +836,7 @@ */ #define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 } -//#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 +#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 #if ENABLED(LIMITED_MAX_ACCEL_EDITING) #define MAX_ACCEL_EDIT_VALUES { 6000, 6000, 200, 20000 } // ...or, set your own edit limits #endif @@ -841,9 +849,9 @@ * M204 R Retract Acceleration * M204 T Travel Acceleration */ -#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves +#define DEFAULT_ACCELERATION 500 // X, Y, Z and E acceleration for printing moves +#define DEFAULT_RETRACT_ACCELERATION 500 // E acceleration for retracts +#define DEFAULT_TRAVEL_ACCELERATION 500 // X, Y, Z acceleration for travel (non printing) moves /** * Default Jerk limits (mm/s) @@ -877,7 +885,7 @@ * https://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html */ #if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.013 // (mm) Distance from real junction edge + #define JUNCTION_DEVIATION_MM 0.01 // (mm) Distance from real junction edge #define JD_HANDLE_SMALL_SEGMENTS // Use curvature estimation instead of just the junction angle // for small segments (< 1mm) with large junction angles (> 135°). #endif @@ -890,7 +898,7 @@ * * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained */ -//#define S_CURVE_ACCELERATION +#define S_CURVE_ACCELERATION //=========================================================================== //============================= Z Probe Options ============================= @@ -940,7 +948,7 @@ * Use G29 repeatedly, adjusting the Z height at each point with movement commands * or (with LCD_BED_LEVELING) the LCD controller. */ -//#define PROBE_MANUALLY +#define PROBE_MANUALLY /** * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. @@ -1055,14 +1063,14 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +#define NOZZLE_TO_PROBE_OFFSET { -5, -1, 0 } // Most probes should stay away from the edges of the bed, but // with NOZZLE_AS_PROBE this can be negative for a wider probing area. -#define PROBING_MARGIN 10 +#define PROBING_MARGIN 1 // X and Y axis travel speed (mm/min) between probes -#define XY_PROBE_FEEDRATE (133*60) +#define XY_PROBE_FEEDRATE (40*60) // Feedrate (mm/min) for the first approach when double-probing (MULTIPLE_PROBING == 2) #define Z_PROBE_FEEDRATE_FAST (4*60) @@ -1106,7 +1114,7 @@ * A total of 2 does fast/slow probes with a weighted average. * A total of 3 or more adds more slow probes, taking the average. */ -//#define MULTIPLE_PROBING 2 +#define MULTIPLE_PROBING 3 //#define EXTRA_PROBING 1 /** @@ -1123,10 +1131,10 @@ * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. */ -#define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow +#define Z_CLEARANCE_DEPLOY_PROBE 5 // Z Clearance for Deploy/Stow #define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points #define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes -//#define Z_AFTER_PROBING 5 // Z position after probing is done +#define Z_AFTER_PROBING 5 // Z position after probing is done #define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping @@ -1190,21 +1198,21 @@ // @section machine // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR false -#define INVERT_Y_DIR true +#define INVERT_X_DIR true +#define INVERT_Y_DIR false #define INVERT_Z_DIR false // @section extruder // For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR false -#define INVERT_E1_DIR false -#define INVERT_E2_DIR false -#define INVERT_E3_DIR false -#define INVERT_E4_DIR false -#define INVERT_E5_DIR false -#define INVERT_E6_DIR false -#define INVERT_E7_DIR false +#define INVERT_E0_DIR true +#define INVERT_E1_DIR true +#define INVERT_E2_DIR true +#define INVERT_E3_DIR true +#define INVERT_E4_DIR true +#define INVERT_E5_DIR true +#define INVERT_E6_DIR true +#define INVERT_E7_DIR true // @section homing @@ -1218,7 +1226,7 @@ */ //#define Z_IDLE_HEIGHT Z_HOME_POS -//#define Z_HOMING_HEIGHT 4 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ... +#define Z_HOMING_HEIGHT 5 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ... // Be sure to have this much clearance over your Z_MAX_POS to prevent grinding. //#define Z_AFTER_HOMING 10 // (mm) Height to move to after homing Z @@ -1232,8 +1240,8 @@ // @section machine // The size of the printable area -#define X_BED_SIZE 200 -#define Y_BED_SIZE 200 +#define X_BED_SIZE 250 +#define Y_BED_SIZE 250 // Travel limits (mm) after homing, corresponding to endstop positions. #define X_MIN_POS 0 @@ -1241,7 +1249,7 @@ #define Z_MIN_POS 0 #define X_MAX_POS X_BED_SIZE #define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 200 +#define Z_MAX_POS 250 /** * Software Endstops @@ -1269,7 +1277,7 @@ #endif #if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS) - //#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD + #define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD #endif /** @@ -1388,7 +1396,7 @@ //#define AUTO_BED_LEVELING_3POINT //#define AUTO_BED_LEVELING_LINEAR //#define AUTO_BED_LEVELING_BILINEAR -//#define AUTO_BED_LEVELING_UBL +#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING /** @@ -1396,7 +1404,7 @@ * these options to restore the prior leveling state or to always enable * leveling immediately after G28. */ -//#define RESTORE_LEVELING_AFTER_G28 +#define RESTORE_LEVELING_AFTER_G28 //#define ENABLE_LEVELING_AFTER_G28 /** @@ -1424,7 +1432,7 @@ // Gradually reduce leveling correction until a set height is reached, // at which point movement will be level to the machine's XY plane. // The height can be set with M420 Z - #define ENABLE_LEVELING_FADE_HEIGHT + //#define ENABLE_LEVELING_FADE_HEIGHT #if ENABLED(ENABLE_LEVELING_FADE_HEIGHT) #define DEFAULT_LEVELING_FADE_HEIGHT 10.0 // (mm) Default fade height. #endif @@ -1487,7 +1495,7 @@ //#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh #define MESH_INSET 1 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. + #define GRID_MAX_POINTS_X 5 // Don't use more than 15 points per axis, implementation limited. #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X //#define UBL_HILBERT_CURVE // Use Hilbert distribution for less travel when probing multiple points @@ -1495,7 +1503,7 @@ #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 - //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used + #define UBL_Z_RAISE_WHEN_OFF_MESH 0 // When the nozzle is off the mesh, this value is used // as the Z-Height correction value. //#define UBL_MESH_WIZARD // Run several commands in a row to get a complete mesh @@ -1523,17 +1531,17 @@ #if ENABLED(LCD_BED_LEVELING) #define MESH_EDIT_Z_STEP 0.025 // (mm) Step size while manually probing Z axis. #define LCD_PROBE_Z_RANGE 4 // (mm) Z Range centered on Z_MIN_POS for LCD Z adjustment - //#define MESH_EDIT_MENU // Add a menu to edit mesh points + #define MESH_EDIT_MENU // Add a menu to edit mesh points #endif // Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS +#define LEVEL_BED_CORNERS #if ENABLED(LEVEL_BED_CORNERS) #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner + #define LEVEL_CORNERS_Z_HOP 5.0 // (mm) Z height of nozzle between leveling points + #define LEVEL_CENTER_TOO // Move to the center after the last corner //#define LEVEL_CORNERS_USE_PROBE #if ENABLED(LEVEL_CORNERS_USE_PROBE) #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 @@ -1595,7 +1603,7 @@ #endif // Homing speeds (mm/min) -#define HOMING_FEEDRATE_MM_M { (50*60), (50*60), (4*60) } +#define HOMING_FEEDRATE_MM_M { (40*60), (40*60), (4*60) } // Validate that endstops are triggered on homing moves #define VALIDATE_HOMING_ENDSTOPS @@ -1672,12 +1680,12 @@ * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) */ -//#define EEPROM_SETTINGS // Persistent storage with M500 and M501 +#define EEPROM_SETTINGS // Persistent storage with M500 and M501 //#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. #define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load #if ENABLED(EEPROM_SETTINGS) - //#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. + #define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. #endif // @@ -1706,14 +1714,14 @@ // Preheat Constants - Up to 5 are supported without changes // #define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 180 -#define PREHEAT_1_TEMP_BED 70 +#define PREHEAT_1_TEMP_HOTEND 200 +#define PREHEAT_1_TEMP_BED 60 #define PREHEAT_1_TEMP_CHAMBER 35 #define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 #define PREHEAT_2_LABEL "ABS" -#define PREHEAT_2_TEMP_HOTEND 240 -#define PREHEAT_2_TEMP_BED 110 +#define PREHEAT_2_TEMP_HOTEND 250 +#define PREHEAT_2_TEMP_BED 100 #define PREHEAT_2_TEMP_CHAMBER 35 #define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 @@ -1728,16 +1736,16 @@ * P1 Raise the nozzle always to Z-park height. * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. */ -//#define NOZZLE_PARK_FEATURE +#define NOZZLE_PARK_FEATURE #if ENABLED(NOZZLE_PARK_FEATURE) // Specify a park position as { X, Y, Z_raise } - #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 } + #define NOZZLE_PARK_POINT { (X_MIN_POS), (Y_MAX_POS), 5 } //#define NOZZLE_PARK_X_ONLY // X move only is required to park //#define NOZZLE_PARK_Y_ONLY // Y move only is required to park #define NOZZLE_PARK_Z_RAISE_MIN 2 // (mm) Always raise Z by at least this distance - #define NOZZLE_PARK_XY_FEEDRATE 100 // (mm/s) X and Y axes feedrate (also used for delta Z axis) - #define NOZZLE_PARK_Z_FEEDRATE 5 // (mm/s) Z axis feedrate (not used for delta printers) + #define NOZZLE_PARK_XY_FEEDRATE 40 // (mm/s) X and Y axes feedrate (also used for delta Z axis) + #define NOZZLE_PARK_Z_FEEDRATE 4 // (mm/s) Z axis feedrate (not used for delta printers) #endif /** @@ -1845,7 +1853,7 @@ * * View the current statistics with M78. */ -//#define PRINTCOUNTER +#define PRINTCOUNTER #if ENABLED(PRINTCOUNTER) #define PRINTCOUNTER_SAVE_INTERVAL 60 // (minutes) EEPROM save interval during print #endif @@ -1936,7 +1944,7 @@ * SD Card support is disabled by default. If your controller has an SD slot, * you must uncomment the following option or it won't work. */ -//#define SDSUPPORT +#define SDSUPPORT /** * SD CARD: ENABLE CRC @@ -2006,7 +2014,7 @@ // // Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. // -//#define INDIVIDUAL_AXIS_HOMING_MENU +#define INDIVIDUAL_AXIS_HOMING_MENU // // SPEAKER/BUZZER @@ -2014,7 +2022,7 @@ // If you have a speaker that can produce tones, enable it here. // By default Marlin assumes you have a buzzer with a fixed frequency. // -//#define SPEAKER +#define SPEAKER // // The duration and frequency for the UI feedback sound. @@ -2023,8 +2031,8 @@ // Note: Test audio output with the G-Code: // M300 S P // -//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 -//#define LCD_FEEDBACK_FREQUENCY_HZ 5000 +#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 10 +#define LCD_FEEDBACK_FREQUENCY_HZ 50 //============================================================================= //======================== LCD / Controller Selection ========================= @@ -2195,7 +2203,7 @@ // RepRapDiscount FULL GRAPHIC Smart Controller // https://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller // -//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER +#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER // // K.3D Full Graphic Smart Controller @@ -2618,7 +2626,7 @@ // Use software PWM to drive the fan, as for the heaters. This uses a very low frequency // which is not as annoying as with the hardware PWM. On the other hand, if this frequency // is too low, you should also increment SOFT_PWM_SCALE. -//#define FAN_SOFT_PWM +#define FAN_SOFT_PWM // Incrementing this by 1 will double the software PWM frequency, // affecting heaters, and the fan if FAN_SOFT_PWM is enabled. diff --git a/config/examples/MakerFarm/Pegasus 12/Configuration_adv.h b/config/examples/MakerFarm/Pegasus 12/Configuration_adv.h index 5335fa012a..9f019e95e2 100644 --- a/config/examples/MakerFarm/Pegasus 12/Configuration_adv.h +++ b/config/examples/MakerFarm/Pegasus 12/Configuration_adv.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "MakerFarm/Pegasus 12" + /** * Configuration_adv.h * @@ -307,7 +309,7 @@ #if ENABLED(PIDTEMP) // Add an experimental additional term to the heater power, proportional to the extrusion speed. // A well-chosen Kc value should add just enough power to melt the increased material volume. - //#define PID_EXTRUSION_SCALING + #define PID_EXTRUSION_SCALING #if ENABLED(PID_EXTRUSION_SCALING) #define DEFAULT_Kc (100) // heating power = Kc * e_speed #define LPQ_MAX_LEN 50 @@ -391,7 +393,7 @@ // Show Temperature ADC value // Enable for M105 to include ADC values read from temperature sensors. -//#define SHOW_TEMP_ADC_VALUES +#define SHOW_TEMP_ADC_VALUES /** * High Temperature Thermistor Support @@ -411,14 +413,14 @@ // The number of consecutive low temperature errors that can occur // before a min_temp_error is triggered. (Shouldn't be more than 10.) -//#define MAX_CONSECUTIVE_LOW_TEMPERATURE_ERROR_ALLOWED 0 +#define MAX_CONSECUTIVE_LOW_TEMPERATURE_ERROR_ALLOWED 10 // The number of milliseconds a hotend will preheat before starting to check // the temperature. This value should NOT be set to the time it takes the // hot end to reach the target temperature, but the time it takes to reach // the minimum temperature your thermistor can read. The lower the better/safer. // This shouldn't need to be more than 30 seconds (30000) -//#define MILLISECONDS_PREHEAT_TIME 0 +#define MILLISECONDS_PREHEAT_TIME 30000 // @section extruder @@ -741,8 +743,8 @@ //#define HOMING_BACKOFF_POST_MM { 2, 2, 2 } // (mm) Backoff from endstops after homing -//#define QUICK_HOME // If G28 contains XY do a diagonal move first -//#define HOME_Y_BEFORE_X // If G28 contains XY home Y before X +#define QUICK_HOME // If G28 contains XY do a diagonal move first +#define HOME_Y_BEFORE_X // If G28 contains XY home Y before X //#define HOME_Z_FIRST // Home Z first. Requires a Z-MIN endstop (not a probe). //#define CODEPENDENT_XY_HOMING // If X/Y can't home without homing Y/X first @@ -826,7 +828,7 @@ // Define probe X and Y positions for Z1, Z2 [, Z3 [, Z4]] // If not defined, probe limits will be used. // Override with 'M422 S X Y' - //#define Z_STEPPER_ALIGN_XY { { 10, 190 }, { 100, 10 }, { 190, 190 } } + //#define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } /** * Orientation for the automatically-calculated probe positions. @@ -867,7 +869,7 @@ // On a 300mm bed a 5% grade would give a misalignment of ~1.5cm #define G34_MAX_GRADE 5 // (%) Maximum incline that G34 will handle - #define Z_STEPPER_ALIGN_ITERATIONS 5 // Number of iterations to apply during alignment + #define Z_STEPPER_ALIGN_ITERATIONS 3 // Number of iterations to apply during alignment #define Z_STEPPER_ALIGN_ACC 0.02 // Stop iterating early if the accuracy is better than this #define RESTORE_LEVELING_AFTER_G34 // Restore leveling after G34 is done? // After G34, re-home Z (G28 Z) or just calculate it from the last probe heights? @@ -925,10 +927,10 @@ * Set DISABLE_INACTIVE_? 'true' to shut down axis steppers after an idle period. * The Deactive Time can be overridden with M18 and M84. Set to 0 for No Timeout. */ -#define DEFAULT_STEPPER_DEACTIVE_TIME 120 -#define DISABLE_INACTIVE_X true -#define DISABLE_INACTIVE_Y true -#define DISABLE_INACTIVE_Z true // Set 'false' if the nozzle could fall onto your printed part! +#define DEFAULT_STEPPER_DEACTIVE_TIME 60 +#define DISABLE_INACTIVE_X false +#define DISABLE_INACTIVE_Y false +#define DISABLE_INACTIVE_Z false // Set 'false' if the nozzle could fall onto your printed part! #define DISABLE_INACTIVE_E true // Default Minimum Feedrates for printing and travel moves @@ -951,7 +953,7 @@ * See https://hydraraptor.blogspot.com/2010/12/frequency-limit.html * Use M201 F G to change limits at runtime. */ -//#define XY_FREQUENCY_LIMIT 10 // (Hz) Maximum frequency of small zigzag infill moves. Set with M201 F. +#define XY_FREQUENCY_LIMIT 20 // (Hz) Maximum frequency of small zigzag infill moves. Set with M201 F. #ifdef XY_FREQUENCY_LIMIT #define XY_FREQUENCY_MIN_PERCENT 5 // (percent) Minimum FR percentage to apply. Set with M201 G. #endif @@ -1059,7 +1061,7 @@ * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the * lowest stepping frequencies. */ -//#define ADAPTIVE_STEP_SMOOTHING +#define ADAPTIVE_STEP_SMOOTHING /** * Custom Microstepping @@ -1145,7 +1147,7 @@ // Change values more rapidly when the encoder is rotated faster #define ENCODER_RATE_MULTIPLIER #if ENABLED(ENCODER_RATE_MULTIPLIER) - #define ENCODER_10X_STEPS_PER_SEC 30 // (steps/s) Encoder rate for 10x speed + #define ENCODER_10X_STEPS_PER_SEC 40 // (steps/s) Encoder rate for 10x speed #define ENCODER_100X_STEPS_PER_SEC 80 // (steps/s) Encoder rate for 100x speed #endif @@ -1175,13 +1177,13 @@ #endif // Include a page of printer information in the LCD Main Menu - //#define LCD_INFO_MENU + #define LCD_INFO_MENU #if ENABLED(LCD_INFO_MENU) //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages #endif // BACK menu items keep the highlight at the top - //#define TURBO_BACK_MENU_ITEM + #define TURBO_BACK_MENU_ITEM // Add a mute option to the LCD menu //#define SOUND_MENU_ITEM @@ -1219,7 +1221,7 @@ #if HAS_DISPLAY // The timeout (in ms) to return to the status screen from sub-menus - //#define LCD_TIMEOUT_TO_STATUS 15000 + #define LCD_TIMEOUT_TO_STATUS 60000 #if ENABLED(SHOW_BOOTSCREEN) #define BOOTSCREEN_TIMEOUT 4000 // (ms) Total Duration to display the boot screen(s) @@ -1229,22 +1231,22 @@ #endif // Scroll a longer status message into view - //#define STATUS_MESSAGE_SCROLLING + #define STATUS_MESSAGE_SCROLLING // On the Info Screen, display XY with one decimal place when possible //#define LCD_DECIMAL_SMALL_XY // Add an 'M73' G-code to set the current percentage - //#define LCD_SET_PROGRESS_MANUALLY + #define LCD_SET_PROGRESS_MANUALLY // Show the E position (filament used) during printing //#define LCD_SHOW_E_TOTAL #endif #if EITHER(SDSUPPORT, LCD_SET_PROGRESS_MANUALLY) && ANY(HAS_MARLINUI_U8GLIB, HAS_MARLINUI_HD44780, IS_TFTGLCD_PANEL, EXTENSIBLE_UI) - //#define SHOW_REMAINING_TIME // Display estimated time to completion + #define SHOW_REMAINING_TIME // Display estimated time to completion #if ENABLED(SHOW_REMAINING_TIME) - //#define USE_M73_REMAINING_TIME // Use remaining time from M73 command instead of estimation + #define USE_M73_REMAINING_TIME // Use remaining time from M73 command instead of estimation //#define ROTATE_PROGRESS_DISPLAY // Display (P)rogress, (E)lapsed, and (R)emaining time #endif @@ -1253,10 +1255,10 @@ #endif #if EITHER(HAS_MARLINUI_HD44780, IS_TFTGLCD_PANEL) - //#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing + #define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing #if ENABLED(LCD_PROGRESS_BAR) - #define PROGRESS_BAR_BAR_TIME 2000 // (ms) Amount of time to show the bar - #define PROGRESS_BAR_MSG_TIME 3000 // (ms) Amount of time to show the status message + #define PROGRESS_BAR_BAR_TIME 10000 // (ms) Amount of time to show the bar + #define PROGRESS_BAR_MSG_TIME 2500 // (ms) Amount of time to show the status message #define PROGRESS_MSG_EXPIRE 0 // (ms) Amount of time to retain the status message (0=forever) //#define PROGRESS_MSG_ONCE // Show the message for MSG_TIME then clear it //#define LCD_PROGRESS_BAR_TEST // Add a menu item to test the progress bar @@ -1288,7 +1290,7 @@ #define SD_PROCEDURE_DEPTH 1 // Increase if you need more nested M32 calls #define SD_FINISHED_STEPPERRELEASE true // Disable steppers when SD Print is finished - #define SD_FINISHED_RELEASECOMMAND "M84" // Use "M84XYE" to keep Z enabled so your bed stays in place + #define SD_FINISHED_RELEASECOMMAND "M84E" // Use "M84XYE" to keep Z enabled so your bed stays in place // Reverse SD sort to show "more recent" files first, according to the card's FAT. // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended. @@ -1297,11 +1299,11 @@ #define SD_MENU_CONFIRM_START // Confirm the selected SD file before printing //#define NO_SD_AUTOSTART // Remove auto#.g file support completely to save some Flash, SRAM - //#define MENU_ADDAUTOSTART // Add a menu option to run auto#.g files + #define MENU_ADDAUTOSTART // Add a menu option to run auto#.g files //#define BROWSE_MEDIA_ON_INSERT // Open the file browser when media is inserted - #define EVENT_GCODE_SD_ABORT "G28XY" // G-code to run on SD Abort Print (e.g., "G28XY" or "G27") + #define EVENT_GCODE_SD_ABORT "G27" // G-code to run on SD Abort Print (e.g., "G28XY" or "G27") #if ENABLED(PRINTER_EVENT_LEDS) #define PE_LEDS_COMPLETED_TIME (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination @@ -1384,7 +1386,7 @@ //#define LONG_FILENAME_HOST_SUPPORT // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES + #define SCROLL_LONG_FILENAMES // Leave the heaters on after Stop Print (not recommended!) //#define SD_ABORT_NO_COOLDOWN @@ -1406,7 +1408,7 @@ /** * Auto-report SdCard status with M27 S */ - //#define AUTO_REPORT_SD_STATUS + #define AUTO_REPORT_SD_STATUS /** * Support for USB thumb drives using an Arduino USB Host Shield or @@ -1465,7 +1467,7 @@ #endif // Add an optimized binary file transfer mode, initiated with 'M28 B1' - //#define BINARY_FILE_TRANSFER + #define BINARY_FILE_TRANSFER /** * Set this option to one of the following (or the board's defaults apply): @@ -1512,7 +1514,7 @@ */ #if HAS_MARLINUI_U8GLIB // Show SD percentage next to the progress bar - //#define DOGM_SD_PERCENT + #define DOGM_SD_PERCENT // Save many cycles by drawing a hollow frame or no frame on the Info Screen //#define XYZ_NO_FRAME @@ -1569,9 +1571,9 @@ //#define STATUS_CUTTER_ANIM // Use a second bitmap to indicate spindle / laser active //#define STATUS_COOLER_ANIM // Use a second bitmap to indicate laser cooling //#define STATUS_FLOWMETER_ANIM // Use multiple bitmaps to indicate coolant flow - //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap - //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap - //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames + #define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap + #define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap + #define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames //#define STATUS_HEAT_PERCENT // Show heating in a progress bar //#define BOOT_MARLIN_LOGO_ANIMATED // Animated Marlin logo. Costs ~‭3260 (or ~940) bytes of PROGMEM. @@ -1790,11 +1792,11 @@ * * Warning: Does not respect endstops! */ -//#define BABYSTEPPING +#define BABYSTEPPING #if ENABLED(BABYSTEPPING) //#define INTEGRATED_BABYSTEPPING // EXPERIMENTAL integration of babystepping into the Stepper ISR //#define BABYSTEP_WITHOUT_HOMING - //#define BABYSTEP_ALWAYS_AVAILABLE // Allow babystepping at all times (not just during movement). + #define BABYSTEP_ALWAYS_AVAILABLE // Allow babystepping at all times (not just during movement). //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way //#define BABYSTEP_MILLIMETER_UNITS // Specify BABYSTEP_MULTIPLICATOR_(XY|Z) in mm instead of micro-steps @@ -1803,7 +1805,7 @@ //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 2000 // Maximum interval between clicks, in milliseconds. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on doubleclick when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) @@ -1837,12 +1839,12 @@ * * See https://marlinfw.org/docs/features/lin_advance.html for full instructions. */ -//#define LIN_ADVANCE +#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants - #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed + #define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants + #define LIN_ADVANCE_K 0 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // If enabled, this will generate debug information output over USB. - //#define EXPERIMENTAL_SCURVE // Enable this option to permit S-Curve Acceleration + #define EXPERIMENTAL_SCURVE // Enable this option to permit S-Curve Acceleration #endif // @section leveling @@ -1982,7 +1984,7 @@ // // G2/G3 Arc Support // -#define ARC_SUPPORT // Disable this feature to save ~3226 bytes +//#define ARC_SUPPORT // Disable this feature to save ~3226 bytes #if ENABLED(ARC_SUPPORT) #define MM_PER_ARC_SEGMENT 1 // (mm) Length (or minimum length) of each arc segment //#define ARC_SEGMENTS_PER_R 1 // Max segment length, MM_PER = Min @@ -2077,21 +2079,15 @@ // @section motion -// The number of linear moves that can be in the planner at once. -// The value of BLOCK_BUFFER_SIZE must be a power of 2 (e.g. 8, 16, 32) -#if BOTH(SDSUPPORT, DIRECT_STEPPING) - #define BLOCK_BUFFER_SIZE 8 -#elif ENABLED(SDSUPPORT) - #define BLOCK_BUFFER_SIZE 16 -#else - #define BLOCK_BUFFER_SIZE 16 -#endif +// The number of linear motions that can be in the plan at any give time. +// THE BLOCK_BUFFER_SIZE NEEDS TO BE A POWER OF 2 (e.g. 8, 16, 32) because shifts and ors are used to do the ring-buffering. +#define BLOCK_BUFFER_SIZE (BUFSIZE*2) // SD,LCD,Buttons take more memory, block buffer needs to be smaller // @section serial // The ASCII buffer for serial input #define MAX_CMD_SIZE 96 -#define BUFSIZE 4 +#define BUFSIZE 8 // Transmission to Host Buffer Size // To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0. @@ -2141,7 +2137,7 @@ * Currently handles M108, M112, M410, M876 * NOTE: Not yet implemented for all platforms. */ -//#define EMERGENCY_PARSER +#define EMERGENCY_PARSER /** * Realtime Reporting (requires EMERGENCY_PARSER) @@ -2170,7 +2166,7 @@ //#define NO_TIMEOUTS 1000 // Milliseconds // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. -//#define ADVANCED_OK +#define ADVANCED_OK // Printrun may have trouble receiving long strings all at once. // This option inserts short delays between lines of serial output. @@ -2188,7 +2184,7 @@ * 'M106 P T2' : Use the set secondary speed * 'M106 P T1' : Restore the previous fan speed */ -//#define EXTRA_FAN_SPEED +#define EXTRA_FAN_SPEED /** * Firmware-based and LCD-controlled retract @@ -2311,7 +2307,7 @@ * * Enable PARK_HEAD_ON_PAUSE to add the G-code M125 Pause and Park. */ -//#define ADVANCED_PAUSE_FEATURE +#define ADVANCED_PAUSE_FEATURE #if ENABLED(ADVANCED_PAUSE_FEATURE) #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. @@ -2337,7 +2333,7 @@ // Filament can be extruded repeatedly from the Filament Change menu // until extrusion is consistent, and to purge old filament. #define ADVANCED_PAUSE_RESUME_PRIME 0 // (mm) Extra distance to prime nozzle after returning from park. - //#define ADVANCED_PAUSE_FANS_PAUSE // Turn off print-cooling fans while the machine is paused. + #define ADVANCED_PAUSE_FANS_PAUSE // Turn off print-cooling fans while the machine is paused. // Filament Unload does a Retract, Delay, and Purge first: #define FILAMENT_UNLOAD_PURGE_RETRACT 13 // (mm) Unload initial retract length. @@ -2349,11 +2345,11 @@ #define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed. #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change. - //#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. - //#define HOME_BEFORE_FILAMENT_CHANGE // If needed, home before parking for filament change + #define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. + #define HOME_BEFORE_FILAMENT_CHANGE // If needed, home before parking for filament change - //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. - //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) + #define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. + #define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) #endif // @section tmc @@ -3439,7 +3435,7 @@ /** * Disable all Volumetric extrusion options */ -//#define NO_VOLUMETRICS +#define NO_VOLUMETRICS #if DISABLED(NO_VOLUMETRICS) /** @@ -3471,10 +3467,10 @@ * - M206 and M428 are disabled. * - G92 will revert to its behavior from Marlin 1.0. */ -//#define NO_WORKSPACE_OFFSETS +#define NO_WORKSPACE_OFFSETS // Extra options for the M114 "Current Position" report -//#define M114_DETAIL // Use 'M114` for details to check planner calculations +#define M114_DETAIL // Use 'M114` for details to check planner calculations //#define M114_REALTIME // Real current position based on forward kinematics //#define M114_LEGACY // M114 used to synchronize on every call. Enable if needed. @@ -3546,32 +3542,32 @@ */ // Custom Menu: Main Menu -//#define CUSTOM_MENU_MAIN +#define CUSTOM_MENU_MAIN #if ENABLED(CUSTOM_MENU_MAIN) - //#define CUSTOM_MENU_MAIN_TITLE "Custom Commands" - #define CUSTOM_MENU_MAIN_SCRIPT_DONE "M117 User Script Done" + #define CUSTOM_MENU_MAIN_TITLE "Tools" + //#define CUSTOM_MENU_MAIN_SCRIPT_DONE "M117 User Script Done" #define CUSTOM_MENU_MAIN_SCRIPT_AUDIBLE_FEEDBACK - //#define CUSTOM_MENU_MAIN_SCRIPT_RETURN // Return to status screen after a script + #define CUSTOM_MENU_MAIN_SCRIPT_RETURN // Return to status screen after a script #define CUSTOM_MENU_MAIN_ONLY_IDLE // Only show custom menu when the machine is idle - #define MAIN_MENU_ITEM_1_DESC "Home & UBL Info" - #define MAIN_MENU_ITEM_1_GCODE "G28\nG29 W" + #define MAIN_MENU_ITEM_1_DESC "Manual UBL" // Use nozzle & paper to setup UBL + #define MAIN_MENU_ITEM_1_GCODE "G28\nG29 P4 R999\nG29 A\nG29 S\nM500" //#define MAIN_MENU_ITEM_1_CONFIRM // Show a confirmation dialog before this action - #define MAIN_MENU_ITEM_2_DESC "Preheat for " PREHEAT_1_LABEL - #define MAIN_MENU_ITEM_2_GCODE "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND) + #define MAIN_MENU_ITEM_2_DESC "Adjust Point Near" // Adjust nearest mesh point + #define MAIN_MENU_ITEM_2_GCODE "G29 P4\nM500" //#define MAIN_MENU_ITEM_2_CONFIRM - //#define MAIN_MENU_ITEM_3_DESC "Preheat for " PREHEAT_2_LABEL - //#define MAIN_MENU_ITEM_3_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) + #define MAIN_MENU_ITEM_3_DESC "PID Autotune End" + #define MAIN_MENU_ITEM_3_GCODE "M303 U1 E0 S200 C8\nM500" //#define MAIN_MENU_ITEM_3_CONFIRM - //#define MAIN_MENU_ITEM_4_DESC "Heat Bed/Home/Level" - //#define MAIN_MENU_ITEM_4_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29" + #define MAIN_MENU_ITEM_4_DESC "PID Autotune Bed" + #define MAIN_MENU_ITEM_4_GCODE "M303 U1 E-1 S60 C8\nM500" //#define MAIN_MENU_ITEM_4_CONFIRM - //#define MAIN_MENU_ITEM_5_DESC "Home & Info" - //#define MAIN_MENU_ITEM_5_GCODE "G28\nM503" + #define MAIN_MENU_ITEM_5_DESC "Park Toolhead" + #define MAIN_MENU_ITEM_5_GCODE "G27" //#define MAIN_MENU_ITEM_5_CONFIRM #endif @@ -3650,9 +3646,9 @@ * Host Prompt Support enables Marlin to use the host for user prompts so * filament runout and other processes can be managed from the host side. */ -//#define HOST_ACTION_COMMANDS +#define HOST_ACTION_COMMANDS #if ENABLED(HOST_ACTION_COMMANDS) - //#define HOST_PROMPT_SUPPORT + #define HOST_PROMPT_SUPPORT //#define HOST_START_MENU_ITEM // Add a menu item that tells the host to start #endif diff --git a/config/examples/MakerParts/Configuration.h b/config/examples/MakerParts/Configuration.h index 78c2dc9160..2db42dd5d2 100644 --- a/config/examples/MakerParts/Configuration.h +++ b/config/examples/MakerParts/Configuration.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "MakerParts" + /** * Configuration.h * @@ -69,7 +71,7 @@ // @section info // Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes. +#define STRING_CONFIG_H_AUTHOR "ejtagle" // Who made the changes. //#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) /** @@ -87,7 +89,7 @@ #define SHOW_BOOTSCREEN // Show the bitmap in Marlin/_Bootscreen.h on startup. -//#define SHOW_CUSTOM_BOOTSCREEN +#define SHOW_CUSTOM_BOOTSCREEN // Show the bitmap in Marlin/_Statusscreen.h on the status screen. //#define CUSTOM_STATUS_SCREEN_IMAGE @@ -102,14 +104,14 @@ * * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] */ -#define SERIAL_PORT 0 +#define SERIAL_PORT -1 /** * Select a secondary serial port on the board to use for communication with the host. * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] */ -//#define SERIAL_PORT_2 -1 +//#define SERIAL_PORT_2 0 /** * Select a third serial port on the board to use for communication with the host. @@ -134,15 +136,15 @@ // Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_RAMPS_14_EFB + #define MOTHERBOARD BOARD_RAMPS_DUO_EFB #endif // Name displayed in the LCD "Ready" message and Info menu -//#define CUSTOM_MACHINE_NAME "3D Printer" +#define CUSTOM_MACHINE_NAME "MakerParts 3D Printer" // Printer's unique ID, used by some programs to differentiate between machines. // Choose your own or use a service like https://www.uuidgenerator.net/version4 -//#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" +#define MACHINE_UUID "4250d842-4943-4601-acca-95ef77b8a4f1" // @section extruder @@ -424,7 +426,7 @@ #define TEMP_SENSOR_5 0 #define TEMP_SENSOR_6 0 #define TEMP_SENSOR_7 0 -#define TEMP_SENSOR_BED 0 +#define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 #define TEMP_SENSOR_COOLER 0 @@ -505,8 +507,8 @@ #define PID_K1 0.95 // Smoothing factor within any PID loop #if ENABLED(PIDTEMP) - //#define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) - //#define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) + #define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) + #define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) // Set/get with gcode: M301 E[extruder number, 0-2] @@ -717,13 +719,13 @@ #endif // Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define X_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_PROBE_ENDSTOP_INVERTING false // Set to true to invert the logic of the probe. +#define X_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Y_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Z_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define X_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Y_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Z_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Z_MIN_PROBE_ENDSTOP_INVERTING true // Set to true to invert the logic of the probe. /** * Stepper Drivers @@ -806,14 +808,14 @@ * Override with M92 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 500 } +#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 4000, 97 } /** * Default Max Feed Rate (mm/s) * Override with M203 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 } +#define DEFAULT_MAX_FEEDRATE { 300, 300, 2, 30 } // For 300mm/s printing //#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 #if ENABLED(LIMITED_MAX_FR_EDITING) @@ -826,7 +828,7 @@ * Override with M201 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 } +#define DEFAULT_MAX_ACCELERATION { 2400, 2400, 10, 200 } //#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 #if ENABLED(LIMITED_MAX_ACCEL_EDITING) @@ -841,9 +843,9 @@ * M204 R Retract Acceleration * M204 T Travel Acceleration */ -#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves +#define DEFAULT_ACCELERATION 2400 // X, Y, Z and E acceleration for printing moves +#define DEFAULT_RETRACT_ACCELERATION 100 // E acceleration for retracts +#define DEFAULT_TRAVEL_ACCELERATION 2400 // X, Y, Z acceleration for travel (non printing) moves /** * Default Jerk limits (mm/s) @@ -855,9 +857,9 @@ */ //#define CLASSIC_JERK #if ENABLED(CLASSIC_JERK) - #define DEFAULT_XJERK 10.0 - #define DEFAULT_YJERK 10.0 - #define DEFAULT_ZJERK 0.3 + #define DEFAULT_XJERK 2.0 + #define DEFAULT_YJERK 2.0 + #define DEFAULT_ZJERK 0.4 //#define TRAVEL_EXTRA_XYJERK 0.0 // Additional jerk allowance for all travel moves @@ -867,7 +869,7 @@ #endif #endif -#define DEFAULT_EJERK 5.0 // May be used by Linear Advance +#define DEFAULT_EJERK 8.0 // May be used by Linear Advance /** * Junction Deviation Factor @@ -877,7 +879,7 @@ * https://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html */ #if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.013 // (mm) Distance from real junction edge + #define JUNCTION_DEVIATION_MM 0.001 // (mm) Distance from real junction edge #define JD_HANDLE_SMALL_SEGMENTS // Use curvature estimation instead of just the junction angle // for small segments (< 1mm) with large junction angles (> 135°). #endif @@ -1190,14 +1192,14 @@ // @section machine // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR false +#define INVERT_X_DIR true #define INVERT_Y_DIR true #define INVERT_Z_DIR false // @section extruder // For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR false +#define INVERT_E0_DIR true #define INVERT_E1_DIR false #define INVERT_E2_DIR false #define INVERT_E3_DIR false @@ -1672,7 +1674,7 @@ * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) */ -//#define EEPROM_SETTINGS // Persistent storage with M500 and M501 +#define EEPROM_SETTINGS // Persistent storage with M500 and M501 //#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. #define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load @@ -1698,7 +1700,7 @@ // // M149 Set temperature units support // -//#define TEMPERATURE_UNITS_SUPPORT +#define TEMPERATURE_UNITS_SUPPORT // @section temperature @@ -1728,7 +1730,7 @@ * P1 Raise the nozzle always to Z-park height. * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. */ -//#define NOZZLE_PARK_FEATURE +#define NOZZLE_PARK_FEATURE #if ENABLED(NOZZLE_PARK_FEATURE) // Specify a park position as { X, Y, Z_raise } @@ -1777,7 +1779,7 @@ * Caveats: The ending Z should be the same as starting Z. * Attention: EXPERIMENTAL. G-code arguments may change. */ -//#define NOZZLE_CLEAN_FEATURE +#define NOZZLE_CLEAN_FEATURE #if ENABLED(NOZZLE_CLEAN_FEATURE) // Default number of pattern repetitions @@ -1936,14 +1938,14 @@ * SD Card support is disabled by default. If your controller has an SD slot, * you must uncomment the following option or it won't work. */ -//#define SDSUPPORT +#define SDSUPPORT /** * SD CARD: ENABLE CRC * * Use CRC checks and retries on the SD communication. */ -//#define SD_CHECK_AND_RETRY +#define SD_CHECK_AND_RETRY /** * LCD Menu Items @@ -1983,7 +1985,7 @@ // // Set this option if CLOCKWISE causes values to DECREASE // -//#define REVERSE_ENCODER_DIRECTION +#define REVERSE_ENCODER_DIRECTION // // This option reverses the encoder direction for navigating LCD menus. @@ -1991,7 +1993,7 @@ // If CLOCKWISE normally moves DOWN this makes it go UP. // If CLOCKWISE normally moves UP this makes it go DOWN. // -//#define REVERSE_MENU_DIRECTION +#define REVERSE_MENU_DIRECTION // // This option reverses the encoder direction for Select Screen. @@ -2006,7 +2008,7 @@ // // Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. // -//#define INDIVIDUAL_AXIS_HOMING_MENU +#define INDIVIDUAL_AXIS_HOMING_MENU // // SPEAKER/BUZZER @@ -2195,7 +2197,7 @@ // RepRapDiscount FULL GRAPHIC Smart Controller // https://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller // -//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER +#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER // // K.3D Full Graphic Smart Controller diff --git a/config/examples/MakerParts/Configuration_adv.h b/config/examples/MakerParts/Configuration_adv.h index 5335fa012a..92c47b2c68 100644 --- a/config/examples/MakerParts/Configuration_adv.h +++ b/config/examples/MakerParts/Configuration_adv.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "MakerParts" + /** * Configuration_adv.h * @@ -272,7 +274,7 @@ /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds + #define WATCH_BED_TEMP_PERIOD 180 // Seconds #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius #endif @@ -867,7 +869,7 @@ // On a 300mm bed a 5% grade would give a misalignment of ~1.5cm #define G34_MAX_GRADE 5 // (%) Maximum incline that G34 will handle - #define Z_STEPPER_ALIGN_ITERATIONS 5 // Number of iterations to apply during alignment + #define Z_STEPPER_ALIGN_ITERATIONS 3 // Number of iterations to apply during alignment #define Z_STEPPER_ALIGN_ACC 0.02 // Stop iterating early if the accuracy is better than this #define RESTORE_LEVELING_AFTER_G34 // Restore leveling after G34 is done? // After G34, re-home Z (G28 Z) or just calculate it from the last probe heights? @@ -1175,7 +1177,7 @@ #endif // Include a page of printer information in the LCD Main Menu - //#define LCD_INFO_MENU + #define LCD_INFO_MENU #if ENABLED(LCD_INFO_MENU) //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages #endif @@ -1219,7 +1221,7 @@ #if HAS_DISPLAY // The timeout (in ms) to return to the status screen from sub-menus - //#define LCD_TIMEOUT_TO_STATUS 15000 + #define LCD_TIMEOUT_TO_STATUS 30000 #if ENABLED(SHOW_BOOTSCREEN) #define BOOTSCREEN_TIMEOUT 4000 // (ms) Total Duration to display the boot screen(s) @@ -1229,10 +1231,10 @@ #endif // Scroll a longer status message into view - //#define STATUS_MESSAGE_SCROLLING + #define STATUS_MESSAGE_SCROLLING // On the Info Screen, display XY with one decimal place when possible - //#define LCD_DECIMAL_SMALL_XY + #define LCD_DECIMAL_SMALL_XY // Add an 'M73' G-code to set the current percentage //#define LCD_SET_PROGRESS_MANUALLY @@ -1301,7 +1303,7 @@ //#define BROWSE_MEDIA_ON_INSERT // Open the file browser when media is inserted - #define EVENT_GCODE_SD_ABORT "G28XY" // G-code to run on SD Abort Print (e.g., "G28XY" or "G27") + #define EVENT_GCODE_SD_ABORT "G27" // G-code to run on SD Abort Print (e.g., "G28XY" or "G27") #if ENABLED(PRINTER_EVENT_LEDS) #define PE_LEDS_COMPLETED_TIME (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination @@ -1361,16 +1363,16 @@ * - SDSORT_CACHE_NAMES will retain the sorted file listing in RAM. (Expensive!) * - SDSORT_DYNAMIC_RAM only uses RAM when the SD menu is visible. (Use with caution!) */ - //#define SDCARD_SORT_ALPHA + #define SDCARD_SORT_ALPHA // SD Card Sorting options #if ENABLED(SDCARD_SORT_ALPHA) #define SDSORT_LIMIT 40 // Maximum number of sorted items (10-256). Costs 27 bytes each. #define FOLDER_SORTING -1 // -1=above 0=none 1=below - #define SDSORT_GCODE false // Allow turning sorting on/off with LCD and M34 G-code. - #define SDSORT_USES_RAM false // Pre-allocate a static array for faster pre-sorting. + #define SDSORT_GCODE true // Allow turning sorting on/off with LCD and M34 G-code. + #define SDSORT_USES_RAM true // Pre-allocate a static array for faster pre-sorting. #define SDSORT_USES_STACK false // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.) - #define SDSORT_CACHE_NAMES false // Keep sorted items in RAM longer for speedy performance. Most expensive option. + #define SDSORT_CACHE_NAMES true // Keep sorted items in RAM longer for speedy performance. Most expensive option. #define SDSORT_DYNAMIC_RAM false // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use! #define SDSORT_CACHE_VFATS 2 // Maximum number of 13-byte VFAT entries to use for sorting. // Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM. @@ -1381,10 +1383,10 @@ //#define UTF_FILENAME_SUPPORT // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT + #define LONG_FILENAME_HOST_SUPPORT // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES + #define SCROLL_LONG_FILENAMES // Leave the heaters on after Stop Print (not recommended!) //#define SD_ABORT_NO_COOLDOWN @@ -1394,14 +1396,14 @@ * This feature must be enabled with "M540 S1" or from the LCD menu. * To have any effect, endstops must be enabled during SD printing. */ - //#define SD_ABORT_ON_ENDSTOP_HIT + #define SD_ABORT_ON_ENDSTOP_HIT /** * This option makes it easier to print the same SD Card file again. * On print completion the LCD Menu will open with the file selected. * You can just click to start the print, or navigate elsewhere. */ - //#define SD_REPRINT_LAST_SELECTED_FILE + #define SD_REPRINT_LAST_SELECTED_FILE /** * Auto-report SdCard status with M27 S @@ -1523,11 +1525,11 @@ // A bigger font is available for edit items. Costs 3120 bytes of PROGMEM. // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. - //#define USE_BIG_EDIT_FONT + #define USE_BIG_EDIT_FONT // A smaller font may be used on the Info Screen. Costs 2434 bytes of PROGMEM. // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. - //#define USE_SMALL_INFOFONT + #define USE_SMALL_INFOFONT // Swap the CW/CCW indicators in the graphics overlay //#define OVERLAY_GFX_REVERSE @@ -1995,7 +1997,7 @@ #endif // Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes. -//#define BEZIER_CURVE_SUPPORT +#define BEZIER_CURVE_SUPPORT /** * Direct Stepping @@ -2100,18 +2102,18 @@ // For debug-echo: 128 bytes for the optimal speed. // Other output doesn't need to be that speedy. // :[0, 2, 4, 8, 16, 32, 64, 128, 256] -#define TX_BUFFER_SIZE 0 +#define TX_BUFFER_SIZE 32 // Host Receive Buffer Size // Without XON/XOFF flow control (see SERIAL_XON_XOFF below) 32 bytes should be enough. // To use flow control, set this buffer size to at least 1024 bytes. // :[0, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048] -//#define RX_BUFFER_SIZE 1024 +#define RX_BUFFER_SIZE 4096 #if RX_BUFFER_SIZE >= 1024 // Enable to have the controller send XON/XOFF control characters to // the host to signal the RX buffer is becoming full. - //#define SERIAL_XON_XOFF + #define SERIAL_XON_XOFF #endif // Add M575 G-code to change the baud rate @@ -2120,11 +2122,11 @@ #if ENABLED(SDSUPPORT) // Enable this option to collect and display the maximum // RX queue usage after transferring a file to SD. - //#define SERIAL_STATS_MAX_RX_QUEUED + #define SERIAL_STATS_MAX_RX_QUEUED // Enable this option to collect and display the number // of dropped bytes after a file transfer to SD. - //#define SERIAL_STATS_DROPPED_RX + #define SERIAL_STATS_DROPPED_RX #endif // Monitor RX buffer usage @@ -2311,7 +2313,7 @@ * * Enable PARK_HEAD_ON_PAUSE to add the G-code M125 Pause and Park. */ -//#define ADVANCED_PAUSE_FEATURE +#define ADVANCED_PAUSE_FEATURE #if ENABLED(ADVANCED_PAUSE_FEATURE) #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. diff --git a/config/examples/Malyan/M150/Configuration.h b/config/examples/Malyan/M150/Configuration.h index 78c2dc9160..f846423c26 100644 --- a/config/examples/Malyan/M150/Configuration.h +++ b/config/examples/Malyan/M150/Configuration.h @@ -21,6 +21,13 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Malyan/M150" + +/** + * Maylan M150 Configuration + * Non-Automatic Bed Level config by default + */ + /** * Configuration.h * @@ -69,7 +76,7 @@ // @section info // Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes. +#define STRING_CONFIG_H_AUTHOR "(Gunther)" // Who made the changes. //#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) /** @@ -87,7 +94,7 @@ #define SHOW_BOOTSCREEN // Show the bitmap in Marlin/_Bootscreen.h on startup. -//#define SHOW_CUSTOM_BOOTSCREEN +#define SHOW_CUSTOM_BOOTSCREEN // Show the bitmap in Marlin/_Statusscreen.h on the status screen. //#define CUSTOM_STATUS_SCREEN_IMAGE @@ -127,22 +134,22 @@ * * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ -#define BAUDRATE 250000 +#define BAUDRATE 115200 // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH // Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_RAMPS_14_EFB + #define MOTHERBOARD BOARD_MELZI_MALYAN #endif // Name displayed in the LCD "Ready" message and Info menu -//#define CUSTOM_MACHINE_NAME "3D Printer" +#define CUSTOM_MACHINE_NAME "Malyan M150" // Printer's unique ID, used by some programs to differentiate between machines. // Choose your own or use a service like https://www.uuidgenerator.net/version4 -//#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" +#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" // @section extruder @@ -424,7 +431,10 @@ #define TEMP_SENSOR_5 0 #define TEMP_SENSOR_6 0 #define TEMP_SENSOR_7 0 -#define TEMP_SENSOR_BED 0 + +// For Malyan M150, some discussions around changing the TEMP_SENSOR_BED from 1 to 3 on a french discussion board. +// The reasons are inconclusive so I leave at 1 +#define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 #define TEMP_SENSOR_COOLER 0 @@ -510,16 +520,17 @@ //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) // Set/get with gcode: M301 E[extruder number, 0-2] + // Malyan M150 example #if ENABLED(PID_PARAMS_PER_HOTEND) // Specify between 1 and HOTENDS values per array. // If fewer than EXTRUDER values are provided, the last element will be repeated. - #define DEFAULT_Kp_LIST { 22.20, 22.20 } - #define DEFAULT_Ki_LIST { 1.08, 1.08 } - #define DEFAULT_Kd_LIST { 114.00, 114.00 } + #define DEFAULT_Kp_LIST { 29.0, 29.0 } + #define DEFAULT_Ki_LIST { 2.0, 2.0 } + #define DEFAULT_Kd_LIST { 97.0, 97.0 } #else - #define DEFAULT_Kp 22.20 - #define DEFAULT_Ki 1.08 - #define DEFAULT_Kd 114.00 + #define DEFAULT_Kp 29.0 + #define DEFAULT_Ki 2.0 + #define DEFAULT_Kd 97.0 #endif #endif // PIDTEMP @@ -717,13 +728,14 @@ #endif // Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define X_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_PROBE_ENDSTOP_INVERTING false // Set to true to invert the logic of the probe. + +#define X_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Y_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Z_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define X_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Y_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Z_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Z_MIN_PROBE_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. /** * Stepper Drivers @@ -792,6 +804,9 @@ * These settings can be reset by M502 * * Note that if EEPROM is enabled, saved values will override these. + * + * These defaults for the Malyan M150 are low values intended to + * give a baseline. With mods it is possible to raise jerk, etc. */ /** @@ -806,7 +821,14 @@ * Override with M92 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 500 } + // Standard M150 17T MXL on X and Y +#define DEFAULT_AXIS_STEPS_PER_UNIT { 3200/34.544, 3200/34.544, 1600, 103.00 } + +// Other common M150 values: +// 16T MXL on X and Y +//#define DEFAULT_AXIS_STEPS_PER_UNIT { 3200/32.512, 3200/32.512, 1600, 103.00 } +// 16T GT2 on X and Y +//#define DEFAULT_AXIS_STEPS_PER_UNIT { 100, 100, 1600, 103.00 } /** * Default Max Feed Rate (mm/s) @@ -826,7 +848,7 @@ * Override with M201 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 } +#define DEFAULT_MAX_ACCELERATION { 700, 700, 100, 10000 } //#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 #if ENABLED(LIMITED_MAX_ACCEL_EDITING) @@ -841,9 +863,9 @@ * M204 R Retract Acceleration * M204 T Travel Acceleration */ -#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves +#define DEFAULT_ACCELERATION 700 // X, Y, Z and E acceleration for printing moves +#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts +#define DEFAULT_TRAVEL_ACCELERATION 700 // X, Y, Z acceleration for travel (non printing) moves /** * Default Jerk limits (mm/s) @@ -855,8 +877,8 @@ */ //#define CLASSIC_JERK #if ENABLED(CLASSIC_JERK) - #define DEFAULT_XJERK 10.0 - #define DEFAULT_YJERK 10.0 + #define DEFAULT_XJERK 8.0 + #define DEFAULT_YJERK 8.0 #define DEFAULT_ZJERK 0.3 //#define TRAVEL_EXTRA_XYJERK 0.0 // Additional jerk allowance for all travel moves @@ -877,7 +899,7 @@ * https://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html */ #if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.013 // (mm) Distance from real junction edge + #define JUNCTION_DEVIATION_MM 0.037 // (mm) Distance from real junction edge #define JD_HANDLE_SMALL_SEGMENTS // Use curvature estimation instead of just the junction angle // for small segments (< 1mm) with large junction angles (> 135°). #endif @@ -1055,20 +1077,24 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } + +// Set for HoolyHoo's probe mount +// http://www.thingiverse.com/thing:1960419 +// Note: HoolyHoo mount is X=35, Y=-50. +//#define NOZZLE_TO_PROBE_OFFSET { 35, -50, 0 } // Most probes should stay away from the edges of the bed, but // with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed (mm/min) between probes -#define XY_PROBE_FEEDRATE (133*60) +//#define XY_PROBE_FEEDRATE (133*60) // Feedrate (mm/min) for the first approach when double-probing (MULTIPLE_PROBING == 2) -#define Z_PROBE_FEEDRATE_FAST (4*60) +//#define Z_PROBE_FEEDRATE_FAST (4*60) // Feedrate (mm/min) for the "accurate" probe of each point -#define Z_PROBE_FEEDRATE_SLOW (Z_PROBE_FEEDRATE_FAST / 2) +//#define Z_PROBE_FEEDRATE_SLOW (Z_PROBE_FEEDRATE_FAST / 2) /** * Probe Activation Switch @@ -1123,16 +1149,16 @@ * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. */ -#define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow -#define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points +//#define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow +//#define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points #define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes //#define Z_AFTER_PROBING 5 // Z position after probing is done #define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping // For M851 give a range for adjusting the Z probe offset -#define Z_PROBE_OFFSET_RANGE_MIN -20 -#define Z_PROBE_OFFSET_RANGE_MAX 20 +//#define Z_PROBE_OFFSET_RANGE_MIN -20 +//#define Z_PROBE_OFFSET_RANGE_MAX 20 // Enable the M48 repeatability test to test probe accuracy //#define Z_MIN_PROBE_REPEATABILITY_TEST @@ -1191,13 +1217,13 @@ // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR false -#define INVERT_Y_DIR true +#define INVERT_Y_DIR false #define INVERT_Z_DIR false // @section extruder // For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR false +#define INVERT_E0_DIR true #define INVERT_E1_DIR false #define INVERT_E2_DIR false #define INVERT_E3_DIR false @@ -1241,7 +1267,7 @@ #define Z_MIN_POS 0 #define X_MAX_POS X_BED_SIZE #define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 200 +#define Z_MAX_POS 180 /** * Software Endstops @@ -1385,6 +1411,10 @@ * leveling in steps so you can manually adjust the Z height at each grid-point. * With an LCD controller the process is guided step-by-step. */ + +// - LINEAR - Not Available on Malyan M150 due to compile memory issues +// - Use MESH_BED_LEVELING, AUTO_BED_LEVELING_3POINT or AUTO_BED_LEVELING_BILINEAR + //#define AUTO_BED_LEVELING_3POINT //#define AUTO_BED_LEVELING_LINEAR //#define AUTO_BED_LEVELING_BILINEAR @@ -1672,7 +1702,7 @@ * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) */ -//#define EEPROM_SETTINGS // Persistent storage with M500 and M501 +#define EEPROM_SETTINGS // Persistent storage with M500 and M501 //#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. #define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load @@ -1706,14 +1736,14 @@ // Preheat Constants - Up to 5 are supported without changes // #define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 180 -#define PREHEAT_1_TEMP_BED 70 +#define PREHEAT_1_TEMP_HOTEND 205 +#define PREHEAT_1_TEMP_BED 60 #define PREHEAT_1_TEMP_CHAMBER 35 -#define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 +#define PREHEAT_1_FAN_SPEED 128 // Value from 0 to 255 #define PREHEAT_2_LABEL "ABS" -#define PREHEAT_2_TEMP_HOTEND 240 -#define PREHEAT_2_TEMP_BED 110 +#define PREHEAT_2_TEMP_HOTEND 230 +#define PREHEAT_2_TEMP_BED 100 #define PREHEAT_2_TEMP_CHAMBER 35 #define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 @@ -1936,7 +1966,7 @@ * SD Card support is disabled by default. If your controller has an SD slot, * you must uncomment the following option or it won't work. */ -//#define SDSUPPORT +#define SDSUPPORT /** * SD CARD: ENABLE CRC @@ -2195,7 +2225,7 @@ // RepRapDiscount FULL GRAPHIC Smart Controller // https://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller // -//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER +#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER // // K.3D Full Graphic Smart Controller diff --git a/config/examples/Malyan/M150/Configuration_adv.h b/config/examples/Malyan/M150/Configuration_adv.h index 5335fa012a..40b1de2c75 100644 --- a/config/examples/Malyan/M150/Configuration_adv.h +++ b/config/examples/Malyan/M150/Configuration_adv.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Malyan/M150" + /** * Configuration_adv.h * @@ -266,7 +268,7 @@ * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_BED_PERIOD 120 // Seconds #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius /** @@ -377,7 +379,7 @@ * Enable Autotemp Mode with M104/M109 F S B. * Disable by sending M104/M109 with no F parameter (or F0 with AUTOTEMP_PROPORTIONAL). */ -#define AUTOTEMP +//#define AUTOTEMP #if ENABLED(AUTOTEMP) #define AUTOTEMP_OLDWEIGHT 0.98 // Turn on AUTOTEMP on M104/M109 by default using proportions set here @@ -867,7 +869,7 @@ // On a 300mm bed a 5% grade would give a misalignment of ~1.5cm #define G34_MAX_GRADE 5 // (%) Maximum incline that G34 will handle - #define Z_STEPPER_ALIGN_ITERATIONS 5 // Number of iterations to apply during alignment + #define Z_STEPPER_ALIGN_ITERATIONS 3 // Number of iterations to apply during alignment #define Z_STEPPER_ALIGN_ACC 0.02 // Stop iterating early if the accuracy is better than this #define RESTORE_LEVELING_AFTER_G34 // Restore leveling after G34 is done? // After G34, re-home Z (G28 Z) or just calculate it from the last probe heights? @@ -1145,8 +1147,8 @@ // Change values more rapidly when the encoder is rotated faster #define ENCODER_RATE_MULTIPLIER #if ENABLED(ENCODER_RATE_MULTIPLIER) - #define ENCODER_10X_STEPS_PER_SEC 30 // (steps/s) Encoder rate for 10x speed - #define ENCODER_100X_STEPS_PER_SEC 80 // (steps/s) Encoder rate for 100x speed + #define ENCODER_10X_STEPS_PER_SEC 75 // (steps/s) Encoder rate for 10x speed + #define ENCODER_100X_STEPS_PER_SEC 300 // (steps/s) Encoder rate for 100x speed #endif // Play a beep when the feedrate is changed from the Status Screen @@ -1381,7 +1383,7 @@ //#define UTF_FILENAME_SUPPORT // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT + #define LONG_FILENAME_HOST_SUPPORT // Enable this option to scroll long filenames in the SD card menu //#define SCROLL_LONG_FILENAMES @@ -1852,12 +1854,12 @@ * Override if the automatically selected points are inadequate. */ #if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL) - //#define PROBE_PT_1_X 15 - //#define PROBE_PT_1_Y 180 - //#define PROBE_PT_2_X 15 - //#define PROBE_PT_2_Y 20 - //#define PROBE_PT_3_X 170 - //#define PROBE_PT_3_Y 20 + #define PROBE_PT_1_X 50 + #define PROBE_PT_1_Y 150 + #define PROBE_PT_2_X 50 + #define PROBE_PT_2_Y 50 + #define PROBE_PT_3_X 150 + #define PROBE_PT_3_Y 50 #endif /** diff --git a/config/examples/Malyan/M200/Configuration.h b/config/examples/Malyan/M200/Configuration.h index 78c2dc9160..2dc7c89e07 100644 --- a/config/examples/Malyan/M200/Configuration.h +++ b/config/examples/Malyan/M200/Configuration.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Malyan/M200" + /** * Configuration.h * @@ -69,7 +71,7 @@ // @section info // Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes. +#define STRING_CONFIG_H_AUTHOR "(xC0000005, Malyan M200 build)" // Who made the changes. //#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) /** @@ -102,7 +104,7 @@ * * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] */ -#define SERIAL_PORT 0 +#define SERIAL_PORT -1 /** * Select a secondary serial port on the board to use for communication with the host. @@ -127,18 +129,18 @@ * * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ -#define BAUDRATE 250000 +#define BAUDRATE 500000 // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH // Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_RAMPS_14_EFB + #define MOTHERBOARD BOARD_MALYAN_M200 #endif // Name displayed in the LCD "Ready" message and Info menu -//#define CUSTOM_MACHINE_NAME "3D Printer" +#define CUSTOM_MACHINE_NAME "Malyan M200" // Printer's unique ID, used by some programs to differentiate between machines. // Choose your own or use a service like https://www.uuidgenerator.net/version4 @@ -416,7 +418,7 @@ * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. */ -#define TEMP_SENSOR_0 1 +#define TEMP_SENSOR_0 11 #define TEMP_SENSOR_1 0 #define TEMP_SENSOR_2 0 #define TEMP_SENSOR_3 0 @@ -424,7 +426,7 @@ #define TEMP_SENSOR_5 0 #define TEMP_SENSOR_6 0 #define TEMP_SENSOR_7 0 -#define TEMP_SENSOR_BED 0 +#define TEMP_SENSOR_BED 11 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 #define TEMP_SENSOR_COOLER 0 @@ -472,7 +474,7 @@ // Above this temperature the heater will be switched off. // This can protect components from overheating, but NOT from shorts and failures. // (Use MINTEMP for thermistor short/failure protection.) -#define HEATER_0_MAXTEMP 275 +#define HEATER_0_MAXTEMP 250 #define HEATER_1_MAXTEMP 275 #define HEATER_2_MAXTEMP 275 #define HEATER_3_MAXTEMP 275 @@ -480,7 +482,7 @@ #define HEATER_5_MAXTEMP 275 #define HEATER_6_MAXTEMP 275 #define HEATER_7_MAXTEMP 275 -#define BED_MAXTEMP 150 +#define BED_MAXTEMP 100 #define CHAMBER_MAXTEMP 60 /** @@ -510,16 +512,17 @@ //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) // Set/get with gcode: M301 E[extruder number, 0-2] + // Malyan M200 #if ENABLED(PID_PARAMS_PER_HOTEND) // Specify between 1 and HOTENDS values per array. // If fewer than EXTRUDER values are provided, the last element will be repeated. - #define DEFAULT_Kp_LIST { 22.20, 22.20 } - #define DEFAULT_Ki_LIST { 1.08, 1.08 } - #define DEFAULT_Kd_LIST { 114.00, 114.00 } + #define DEFAULT_Kp_LIST { 20.00, 20.00 } + #define DEFAULT_Ki_LIST { 2.02, 2.02 } + #define DEFAULT_Kd_LIST { 100.00, 100.00 } #else - #define DEFAULT_Kp 22.20 - #define DEFAULT_Ki 1.08 - #define DEFAULT_Kd 114.00 + #define DEFAULT_Kp 20.00 + #define DEFAULT_Ki 2.02 + #define DEFAULT_Kd 100.00 #endif #endif // PIDTEMP @@ -540,7 +543,7 @@ * heater. If your configuration is significantly different than this and you don't understand * the issues involved, don't use bed PID until someone else verifies that your hardware works. */ -//#define PIDTEMPBED +#define PIDTEMPBED //#define BED_LIMIT_SWITCHING @@ -558,9 +561,14 @@ // 120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) // from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) - #define DEFAULT_bedKp 10.00 - #define DEFAULT_bedKi .023 - #define DEFAULT_bedKd 305.4 + //#define DEFAULT_bedKp 231.09 + //#define DEFAULT_bedKi 45.21 + //#define DEFAULT_bedKd 295.34 + + // Malyan M200 + #define DEFAULT_bedKp 14.00 + #define DEFAULT_bedKi 0.9 + #define DEFAULT_bedKd 120.4 // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. #endif // PIDTEMPBED @@ -717,9 +725,9 @@ #endif // Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. +#define X_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Y_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Z_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. #define X_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. #define Y_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. #define Z_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. @@ -806,7 +814,7 @@ * Override with M92 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 500 } +#define DEFAULT_AXIS_STEPS_PER_UNIT { 93, 93, 1097.5, 97 } /** * Default Max Feed Rate (mm/s) @@ -1175,9 +1183,9 @@ // Disable axis steppers immediately when they're not being stepped. // WARNING: When motors turn off there is a chance of losing position accuracy! -#define DISABLE_X false -#define DISABLE_Y false -#define DISABLE_Z false +#define DISABLE_X true +#define DISABLE_Y true +#define DISABLE_Z true // Turn off the display blinking that warns about possible accuracy reduction //#define DISABLE_REDUCED_ACCURACY_WARNING @@ -1197,7 +1205,7 @@ // @section extruder // For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR false +#define INVERT_E0_DIR true #define INVERT_E1_DIR false #define INVERT_E2_DIR false #define INVERT_E3_DIR false @@ -1232,8 +1240,8 @@ // @section machine // The size of the printable area -#define X_BED_SIZE 200 -#define Y_BED_SIZE 200 +#define X_BED_SIZE 120 +#define Y_BED_SIZE 120 // Travel limits (mm) after homing, corresponding to endstop positions. #define X_MIN_POS 0 @@ -1241,7 +1249,7 @@ #define Z_MIN_POS 0 #define X_MAX_POS X_BED_SIZE #define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 200 +#define Z_MAX_POS 120 /** * Software Endstops @@ -1936,7 +1944,7 @@ * SD Card support is disabled by default. If your controller has an SD slot, * you must uncomment the following option or it won't work. */ -//#define SDSUPPORT +#define SDSUPPORT /** * SD CARD: ENABLE CRC @@ -2396,7 +2404,7 @@ // // Touch-screen LCD for Malyan M200/M300 printers // -//#define MALYAN_LCD +#define MALYAN_LCD #if ENABLED(MALYAN_LCD) #define LCD_SERIAL_PORT 1 // Default is 1 for Malyan M200 #endif diff --git a/config/examples/Malyan/M200/Configuration_adv.h b/config/examples/Malyan/M200/Configuration_adv.h index 5335fa012a..dfae1274de 100644 --- a/config/examples/Malyan/M200/Configuration_adv.h +++ b/config/examples/Malyan/M200/Configuration_adv.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Malyan/M200" + /** * Configuration_adv.h * @@ -266,7 +268,7 @@ * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_BED_PERIOD 50 // Seconds #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius /** @@ -461,9 +463,9 @@ * The fan turns on automatically whenever any driver is enabled and turns * off (or reduces to idle speed) shortly after drivers are turned off. */ -//#define USE_CONTROLLER_FAN +#define USE_CONTROLLER_FAN // Malyan M200: uncomment if you use FAN2 to cool the board (original) #if ENABLED(USE_CONTROLLER_FAN) - //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan + #define CONTROLLER_FAN_PIN MALYAN_FAN2_PIN // Set a custom pin for the controller fan //#define CONTROLLER_FAN_USE_Z_ONLY // With this option only the Z axis is considered //#define CONTROLLER_FAN_IGNORE_Z // Ignore Z stepper. Useful when stepper timeout is disabled. #define CONTROLLERFAN_SPEED_MIN 0 // (0-255) Minimum speed. (If set below this value the fan is turned off.) @@ -540,7 +542,9 @@ * Multiple extruders can be assigned to the same pin in which case * the fan will turn on when any selected extruder is above the threshold. */ -#define E0_AUTO_FAN_PIN -1 +//#define FAN_PIN MALYAN_FAN1_PIN // Malyan M200: uncomment if you use FAN1 to cool the part and FAN2 to cool the extruder +//#define E0_AUTO_FAN_PIN MALYAN_FAN2_PIN // Malyan M200: uncomment if you use FAN1 to cool the part and FAN2 to cool the extruder +#define E0_AUTO_FAN_PIN MALYAN_FAN1_PIN // Malyan M200: uncomment if you use FAN1 to cool the extruder and the part (original) #define E1_AUTO_FAN_PIN -1 #define E2_AUTO_FAN_PIN -1 #define E3_AUTO_FAN_PIN -1 @@ -601,7 +605,7 @@ // @section extras -//#define Z_LATE_ENABLE // Enable Z the last moment. Needed if your Z driver overheats. +#define Z_LATE_ENABLE // Enable Z the last moment. Needed if your Z driver overheats. // Employ an external closed loop controller. Override pins here if needed. //#define EXTERNAL_CLOSED_LOOP_CONTROLLER @@ -867,7 +871,7 @@ // On a 300mm bed a 5% grade would give a misalignment of ~1.5cm #define G34_MAX_GRADE 5 // (%) Maximum incline that G34 will handle - #define Z_STEPPER_ALIGN_ITERATIONS 5 // Number of iterations to apply during alignment + #define Z_STEPPER_ALIGN_ITERATIONS 3 // Number of iterations to apply during alignment #define Z_STEPPER_ALIGN_ACC 0.02 // Stop iterating early if the accuracy is better than this #define RESTORE_LEVELING_AFTER_G34 // Restore leveling after G34 is done? // After G34, re-home Z (G28 Z) or just calculate it from the last probe heights? @@ -1381,7 +1385,7 @@ //#define UTF_FILENAME_SUPPORT // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT + #define LONG_FILENAME_HOST_SUPPORT // Enable this option to scroll long filenames in the SD card menu //#define SCROLL_LONG_FILENAMES @@ -1982,7 +1986,7 @@ // // G2/G3 Arc Support // -#define ARC_SUPPORT // Disable this feature to save ~3226 bytes +//#define ARC_SUPPORT // Disable this feature to save ~3226 bytes #if ENABLED(ARC_SUPPORT) #define MM_PER_ARC_SEGMENT 1 // (mm) Length (or minimum length) of each arc segment //#define ARC_SEGMENTS_PER_R 1 // Max segment length, MM_PER = Min diff --git a/config/examples/Micromake/C1/basic/Configuration.h b/config/examples/Micromake/C1/basic/Configuration.h index 78c2dc9160..34a0737660 100644 --- a/config/examples/Micromake/C1/basic/Configuration.h +++ b/config/examples/Micromake/C1/basic/Configuration.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Micromake/C1/basic" + /** * Configuration.h * @@ -69,7 +71,7 @@ // @section info // Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes. +#define STRING_CONFIG_H_AUTHOR "(MetalSearch, Micromake C1 factory settings)" // Who made the changes. //#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) /** @@ -134,11 +136,11 @@ // Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_RAMPS_14_EFB + #define MOTHERBOARD BOARD_MAKEBOARD_MINI #endif // Name displayed in the LCD "Ready" message and Info menu -//#define CUSTOM_MACHINE_NAME "3D Printer" +#define CUSTOM_MACHINE_NAME "Micromake C1" // Printer's unique ID, used by some programs to differentiate between machines. // Choose your own or use a service like https://www.uuidgenerator.net/version4 @@ -151,7 +153,7 @@ #define EXTRUDERS 1 // Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc. -#define DEFAULT_NOMINAL_FILAMENT_DIA 1.75 +#define DEFAULT_NOMINAL_FILAMENT_DIA 3.0 // For Cyclops or any "multi-extruder" that shares a single nozzle. //#define SINGLENOZZLE @@ -667,7 +669,7 @@ // Enable one of the options below for CoreXY, CoreXZ, or CoreYZ kinematics, // either in the usual order or reversed //#define COREXY -//#define COREXZ +#define COREXZ //#define COREYZ //#define COREYX //#define COREZX @@ -806,14 +808,18 @@ * Override with M92 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 500 } +// choose your micro step per step configuration ( 16 factory settings ) +#define DEFAULT_AXIS_STEPS_PER_UNIT { 100, 100, 100, 150 } // 16 steps per unit for Micromake C1 - Factory Settings - ( MS1 : closed ; MS2 : closed on MAKEBOARD Mini) +//#define DEFAULT_AXIS_STEPS_PER_UNIT { 200, 200, 200, 300 } // 32 steps per unit for Micromake C1 - Custom Settings - ( MS1 : closed ; MS2 : open on MAKEBOARD Mini) +//#define DEFAULT_AXIS_STEPS_PER_UNIT { 400, 400, 400, 600 } // 64 steps per unit for Micromake C1 - Custom Settings - ( MS1 : open ; MS2 : closed on MAKEBOARD Mini) +//#define DEFAULT_AXIS_STEPS_PER_UNIT { 800, 800, 800, 1200 } // 128 steps per unit for Micromake C1 - Custom Settings - ( MS1 : open ; MS2 : open on MAKEBOARD Mini) /** * Default Max Feed Rate (mm/s) * Override with M203 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 } +#define DEFAULT_MAX_FEEDRATE { 200, 200, 200, 30 } //#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 #if ENABLED(LIMITED_MAX_FR_EDITING) @@ -826,7 +832,7 @@ * Override with M201 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 } + #define DEFAULT_MAX_ACCELERATION { 3000, 3000, 3000, 4000 } //#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 #if ENABLED(LIMITED_MAX_ACCEL_EDITING) @@ -857,7 +863,7 @@ #if ENABLED(CLASSIC_JERK) #define DEFAULT_XJERK 10.0 #define DEFAULT_YJERK 10.0 - #define DEFAULT_ZJERK 0.3 + #define DEFAULT_ZJERK 10.0 //#define TRAVEL_EXTRA_XYJERK 0.0 // Additional jerk allowance for all travel moves @@ -1055,7 +1061,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +#define NOZZLE_TO_PROBE_OFFSET { 0, 0, 0 } // Most probes should stay away from the edges of the bed, but // with NOZZLE_AS_PROBE this can be negative for a wider probing area. @@ -1191,7 +1197,7 @@ // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR false -#define INVERT_Y_DIR true +#define INVERT_Y_DIR false #define INVERT_Z_DIR false // @section extruder @@ -1232,8 +1238,8 @@ // @section machine // The size of the printable area -#define X_BED_SIZE 200 -#define Y_BED_SIZE 200 +#define X_BED_SIZE 240 +#define Y_BED_SIZE 240 // Travel limits (mm) after homing, corresponding to endstop positions. #define X_MIN_POS 0 @@ -1241,7 +1247,7 @@ #define Z_MIN_POS 0 #define X_MAX_POS X_BED_SIZE #define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 200 +#define Z_MAX_POS 260 /** * Software Endstops @@ -1389,7 +1395,7 @@ //#define AUTO_BED_LEVELING_LINEAR //#define AUTO_BED_LEVELING_BILINEAR //#define AUTO_BED_LEVELING_UBL -//#define MESH_BED_LEVELING +#define MESH_BED_LEVELING /** * Normally G28 leaves leveling disabled on completion. Enable one of @@ -1518,7 +1524,7 @@ * Add a bed leveling sub-menu for ABL or MBL. * Include a guided procedure if manual probing is enabled. */ -//#define LCD_BED_LEVELING +#define LCD_BED_LEVELING #if ENABLED(LCD_BED_LEVELING) #define MESH_EDIT_Z_STEP 0.025 // (mm) Step size while manually probing Z axis. @@ -1672,7 +1678,7 @@ * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) */ -//#define EEPROM_SETTINGS // Persistent storage with M500 and M501 +#define EEPROM_SETTINGS // Persistent storage with M500 and M501 //#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. #define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load @@ -1693,12 +1699,12 @@ // // G20/G21 Inch mode support // -//#define INCH_MODE_SUPPORT +#define INCH_MODE_SUPPORT // // M149 Set temperature units support // -//#define TEMPERATURE_UNITS_SUPPORT +#define TEMPERATURE_UNITS_SUPPORT // @section temperature @@ -1777,7 +1783,7 @@ * Caveats: The ending Z should be the same as starting Z. * Attention: EXPERIMENTAL. G-code arguments may change. */ -//#define NOZZLE_CLEAN_FEATURE +#define NOZZLE_CLEAN_FEATURE #if ENABLED(NOZZLE_CLEAN_FEATURE) // Default number of pattern repetitions @@ -1845,7 +1851,7 @@ * * View the current statistics with M78. */ -//#define PRINTCOUNTER +#define PRINTCOUNTER #if ENABLED(PRINTCOUNTER) #define PRINTCOUNTER_SAVE_INTERVAL 60 // (minutes) EEPROM save interval during print #endif @@ -1936,14 +1942,14 @@ * SD Card support is disabled by default. If your controller has an SD slot, * you must uncomment the following option or it won't work. */ -//#define SDSUPPORT +#define SDSUPPORT /** * SD CARD: ENABLE CRC * * Use CRC checks and retries on the SD communication. */ -//#define SD_CHECK_AND_RETRY +#define SD_CHECK_AND_RETRY /** * LCD Menu Items @@ -2087,7 +2093,7 @@ // Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller // https://www.aliexpress.com/item/32765887917.html // -//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 +#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 // // ANET and Tronxy 20x4 Controller diff --git a/config/examples/Micromake/C1/enhanced/Configuration.h b/config/examples/Micromake/C1/enhanced/Configuration.h index 78c2dc9160..00e175a4ad 100644 --- a/config/examples/Micromake/C1/enhanced/Configuration.h +++ b/config/examples/Micromake/C1/enhanced/Configuration.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Micromake/C1/enhanced" + /** * Configuration.h * @@ -69,7 +71,7 @@ // @section info // Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes. +#define STRING_CONFIG_H_AUTHOR "(MetalSearch, Micromake C1 enhanced)" // Who made the changes. //#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) /** @@ -134,11 +136,11 @@ // Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_RAMPS_14_EFB + #define MOTHERBOARD BOARD_MAKEBOARD_MINI #endif // Name displayed in the LCD "Ready" message and Info menu -//#define CUSTOM_MACHINE_NAME "3D Printer" +#define CUSTOM_MACHINE_NAME "Micromake C1" // Printer's unique ID, used by some programs to differentiate between machines. // Choose your own or use a service like https://www.uuidgenerator.net/version4 @@ -151,7 +153,7 @@ #define EXTRUDERS 1 // Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc. -#define DEFAULT_NOMINAL_FILAMENT_DIA 1.75 +#define DEFAULT_NOMINAL_FILAMENT_DIA 3.0 // For Cyclops or any "multi-extruder" that shares a single nozzle. //#define SINGLENOZZLE @@ -667,7 +669,7 @@ // Enable one of the options below for CoreXY, CoreXZ, or CoreYZ kinematics, // either in the usual order or reversed //#define COREXY -//#define COREXZ +#define COREXZ //#define COREYZ //#define COREYX //#define COREZX @@ -719,11 +721,11 @@ // Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). #define X_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. #define Y_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. +#define Z_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. #define X_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. #define Y_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. #define Z_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_PROBE_ENDSTOP_INVERTING false // Set to true to invert the logic of the probe. +#define Z_MIN_PROBE_ENDSTOP_INVERTING true // Set to true to invert the logic of the probe. /** * Stepper Drivers @@ -806,14 +808,18 @@ * Override with M92 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 500 } +// choose your micro step per step configuration ( 16 factory settings ) +//#define DEFAULT_AXIS_STEPS_PER_UNIT { 100, 100, 100, 150 } // 16 steps per unit for Micromake C1 - Factory Settings - ( MS1 : closed ; MS2 : closed on MAKEBOARD Mini) +//#define DEFAULT_AXIS_STEPS_PER_UNIT { 200, 200, 200, 300 } // 32 steps per unit for Micromake C1 - Custom Settings - ( MS1 : closed ; MS2 : open on MAKEBOARD Mini) +//#define DEFAULT_AXIS_STEPS_PER_UNIT { 400, 400, 400, 600 } // 64 steps per unit for Micromake C1 - Custom Settings - ( MS1 : open ; MS2 : closed on MAKEBOARD Mini) +#define DEFAULT_AXIS_STEPS_PER_UNIT { 800, 800, 800, 1200 } // 128 steps per unit for Micromake C1 - Custom Settings - ( MS1 : open ; MS2 : open on MAKEBOARD Mini) /** * Default Max Feed Rate (mm/s) * Override with M203 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 } + #define DEFAULT_MAX_FEEDRATE { 200, 200, 200, 30 } //#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 #if ENABLED(LIMITED_MAX_FR_EDITING) @@ -826,7 +832,7 @@ * Override with M201 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 } + #define DEFAULT_MAX_ACCELERATION { 3000, 3000, 3000, 4000 } //#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 #if ENABLED(LIMITED_MAX_ACCEL_EDITING) @@ -857,7 +863,7 @@ #if ENABLED(CLASSIC_JERK) #define DEFAULT_XJERK 10.0 #define DEFAULT_YJERK 10.0 - #define DEFAULT_ZJERK 0.3 + #define DEFAULT_ZJERK 10.0 //#define TRAVEL_EXTRA_XYJERK 0.0 // Additional jerk allowance for all travel moves @@ -946,7 +952,7 @@ * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. * (e.g., an inductive probe or a nozzle-based probe-switch.) */ -//#define FIX_MOUNTED_PROBE +#define FIX_MOUNTED_PROBE /** * Use the nozzle as the probe, as with a conductive @@ -1055,7 +1061,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +#define NOZZLE_TO_PROBE_OFFSET { 0, 0, 0 } // Most probes should stay away from the edges of the bed, but // with NOZZLE_AS_PROBE this can be negative for a wider probing area. @@ -1106,7 +1112,7 @@ * A total of 2 does fast/slow probes with a weighted average. * A total of 3 or more adds more slow probes, taking the average. */ -//#define MULTIPLE_PROBING 2 +#define MULTIPLE_PROBING 2 //#define EXTRA_PROBING 1 /** @@ -1191,7 +1197,7 @@ // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR false -#define INVERT_Y_DIR true +#define INVERT_Y_DIR false #define INVERT_Z_DIR false // @section extruder @@ -1232,8 +1238,8 @@ // @section machine // The size of the printable area -#define X_BED_SIZE 200 -#define Y_BED_SIZE 200 +#define X_BED_SIZE 240 +#define Y_BED_SIZE 240 // Travel limits (mm) after homing, corresponding to endstop positions. #define X_MIN_POS 0 @@ -1241,7 +1247,7 @@ #define Z_MIN_POS 0 #define X_MAX_POS X_BED_SIZE #define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 200 +#define Z_MAX_POS 260 /** * Software Endstops @@ -1387,7 +1393,7 @@ */ //#define AUTO_BED_LEVELING_3POINT //#define AUTO_BED_LEVELING_LINEAR -//#define AUTO_BED_LEVELING_BILINEAR +#define AUTO_BED_LEVELING_BILINEAR //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING @@ -1587,7 +1593,7 @@ // - Move the Z probe (or nozzle) to a defined XY point before Z Homing. // - Prevent Z homing when the Z probe is outside bed area. // -//#define Z_SAFE_HOMING +#define Z_SAFE_HOMING #if ENABLED(Z_SAFE_HOMING) #define Z_SAFE_HOMING_X_POINT X_CENTER // X point for Z homing @@ -1672,7 +1678,7 @@ * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) */ -//#define EEPROM_SETTINGS // Persistent storage with M500 and M501 +#define EEPROM_SETTINGS // Persistent storage with M500 and M501 //#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. #define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load @@ -1693,12 +1699,12 @@ // // G20/G21 Inch mode support // -//#define INCH_MODE_SUPPORT +#define INCH_MODE_SUPPORT // // M149 Set temperature units support // -//#define TEMPERATURE_UNITS_SUPPORT +#define TEMPERATURE_UNITS_SUPPORT // @section temperature @@ -1728,7 +1734,7 @@ * P1 Raise the nozzle always to Z-park height. * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. */ -//#define NOZZLE_PARK_FEATURE +#define NOZZLE_PARK_FEATURE #if ENABLED(NOZZLE_PARK_FEATURE) // Specify a park position as { X, Y, Z_raise } @@ -1777,7 +1783,7 @@ * Caveats: The ending Z should be the same as starting Z. * Attention: EXPERIMENTAL. G-code arguments may change. */ -//#define NOZZLE_CLEAN_FEATURE +#define NOZZLE_CLEAN_FEATURE #if ENABLED(NOZZLE_CLEAN_FEATURE) // Default number of pattern repetitions @@ -1845,7 +1851,7 @@ * * View the current statistics with M78. */ -//#define PRINTCOUNTER +#define PRINTCOUNTER #if ENABLED(PRINTCOUNTER) #define PRINTCOUNTER_SAVE_INTERVAL 60 // (minutes) EEPROM save interval during print #endif @@ -1936,14 +1942,14 @@ * SD Card support is disabled by default. If your controller has an SD slot, * you must uncomment the following option or it won't work. */ -//#define SDSUPPORT +#define SDSUPPORT /** * SD CARD: ENABLE CRC * * Use CRC checks and retries on the SD communication. */ -//#define SD_CHECK_AND_RETRY +#define SD_CHECK_AND_RETRY /** * LCD Menu Items @@ -2014,7 +2020,7 @@ // If you have a speaker that can produce tones, enable it here. // By default Marlin assumes you have a buzzer with a fixed frequency. // -//#define SPEAKER +#define SPEAKER // // The duration and frequency for the UI feedback sound. @@ -2023,8 +2029,8 @@ // Note: Test audio output with the G-Code: // M300 S P // -//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 -//#define LCD_FEEDBACK_FREQUENCY_HZ 5000 +#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 100 +#define LCD_FEEDBACK_FREQUENCY_HZ 1000 //============================================================================= //======================== LCD / Controller Selection ========================= @@ -2087,7 +2093,7 @@ // Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller // https://www.aliexpress.com/item/32765887917.html // -//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 +#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 // // ANET and Tronxy 20x4 Controller diff --git a/config/examples/Micromake/C1/enhanced/Configuration_adv.h b/config/examples/Micromake/C1/enhanced/Configuration_adv.h index 5335fa012a..f248e4ad41 100644 --- a/config/examples/Micromake/C1/enhanced/Configuration_adv.h +++ b/config/examples/Micromake/C1/enhanced/Configuration_adv.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Micromake/C1/enhanced" + /** * Configuration_adv.h * @@ -867,7 +869,7 @@ // On a 300mm bed a 5% grade would give a misalignment of ~1.5cm #define G34_MAX_GRADE 5 // (%) Maximum incline that G34 will handle - #define Z_STEPPER_ALIGN_ITERATIONS 5 // Number of iterations to apply during alignment + #define Z_STEPPER_ALIGN_ITERATIONS 3 // Number of iterations to apply during alignment #define Z_STEPPER_ALIGN_ACC 0.02 // Stop iterating early if the accuracy is better than this #define RESTORE_LEVELING_AFTER_G34 // Restore leveling after G34 is done? // After G34, re-home Z (G28 Z) or just calculate it from the last probe heights? @@ -1301,7 +1303,7 @@ //#define BROWSE_MEDIA_ON_INSERT // Open the file browser when media is inserted - #define EVENT_GCODE_SD_ABORT "G28XY" // G-code to run on SD Abort Print (e.g., "G28XY" or "G27") + #define EVENT_GCODE_SD_ABORT "G27" // G-code to run on SD Abort Print (e.g., "G28XY" or "G27") #if ENABLED(PRINTER_EVENT_LEDS) #define PE_LEDS_COMPLETED_TIME (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination diff --git a/config/examples/Mks/Robin/Configuration.h b/config/examples/Mks/Robin/Configuration.h index 78c2dc9160..5d361da4da 100644 --- a/config/examples/Mks/Robin/Configuration.h +++ b/config/examples/Mks/Robin/Configuration.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Mks/Robin" + /** * Configuration.h * @@ -102,14 +104,14 @@ * * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] */ -#define SERIAL_PORT 0 +#define SERIAL_PORT 3 /** * Select a secondary serial port on the board to use for communication with the host. * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] */ -//#define SERIAL_PORT_2 -1 +#define SERIAL_PORT_2 1 /** * Select a third serial port on the board to use for communication with the host. @@ -134,11 +136,11 @@ // Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_RAMPS_14_EFB + #define MOTHERBOARD BOARD_MKS_ROBIN #endif // Name displayed in the LCD "Ready" message and Info menu -//#define CUSTOM_MACHINE_NAME "3D Printer" +#define CUSTOM_MACHINE_NAME "MKS Robin" // Printer's unique ID, used by some programs to differentiate between machines. // Choose your own or use a service like https://www.uuidgenerator.net/version4 @@ -148,7 +150,7 @@ // This defines the number of extruders // :[0, 1, 2, 3, 4, 5, 6, 7, 8] -#define EXTRUDERS 1 +#define EXTRUDERS 2 // Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc. #define DEFAULT_NOMINAL_FILAMENT_DIA 1.75 @@ -417,14 +419,14 @@ * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. */ #define TEMP_SENSOR_0 1 -#define TEMP_SENSOR_1 0 +#define TEMP_SENSOR_1 1 #define TEMP_SENSOR_2 0 #define TEMP_SENSOR_3 0 #define TEMP_SENSOR_4 0 #define TEMP_SENSOR_5 0 #define TEMP_SENSOR_6 0 #define TEMP_SENSOR_7 0 -#define TEMP_SENSOR_BED 0 +#define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 #define TEMP_SENSOR_COOLER 0 @@ -752,7 +754,7 @@ //#define Z3_DRIVER_TYPE A4988 //#define Z4_DRIVER_TYPE A4988 #define E0_DRIVER_TYPE A4988 -//#define E1_DRIVER_TYPE A4988 +#define E1_DRIVER_TYPE A4988 //#define E2_DRIVER_TYPE A4988 //#define E3_DRIVER_TYPE A4988 //#define E4_DRIVER_TYPE A4988 @@ -806,7 +808,7 @@ * Override with M92 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 500 } +#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 4000, 500 } /** * Default Max Feed Rate (mm/s) @@ -1936,7 +1938,8 @@ * SD Card support is disabled by default. If your controller has an SD slot, * you must uncomment the following option or it won't work. */ -//#define SDSUPPORT +#define SDSUPPORT +#define SDIO_SUPPORT /** * SD CARD: ENABLE CRC @@ -2518,17 +2521,17 @@ // // Generic TFT with detailed options // -//#define TFT_GENERIC +#define TFT_GENERIC #if ENABLED(TFT_GENERIC) // :[ 'AUTO', 'ST7735', 'ST7789', 'ST7796', 'R61505', 'ILI9328', 'ILI9341', 'ILI9488' ] #define TFT_DRIVER AUTO // Interface. Enable one of the following options: - //#define TFT_INTERFACE_FSMC + #define TFT_INTERFACE_FSMC //#define TFT_INTERFACE_SPI // TFT Resolution. Enable one of the following options: - //#define TFT_RES_320x240 + #define TFT_RES_320x240 //#define TFT_RES_480x272 //#define TFT_RES_480x320 #endif @@ -2544,7 +2547,7 @@ * root of your SD card, together with the compiled firmware. */ //#define TFT_CLASSIC_UI -//#define TFT_COLOR_UI +#define TFT_COLOR_UI //#define TFT_LVGL_UI #if ENABLED(TFT_LVGL_UI) @@ -2573,17 +2576,31 @@ // // Touch Screen Settings // -//#define TOUCH_SCREEN +#define TOUCH_SCREEN #if ENABLED(TOUCH_SCREEN) #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus #define TOUCH_SCREEN_CALIBRATION - //#define TOUCH_CALIBRATION_X 12316 - //#define TOUCH_CALIBRATION_Y -8981 - //#define TOUCH_OFFSET_X -43 - //#define TOUCH_OFFSET_Y 257 + /* MKS Robin TFT v2.0 */ + #define TOUCH_CALIBRATION_X 12013 + #define TOUCH_CALIBRATION_Y -8711 + #define TOUCH_OFFSET_X -32 + #define TOUCH_OFFSET_Y 256 + + /* MKS Robin TFT v1.1 with ILI9328 */ + //#define TOUCH_CALIBRATION_X -11792 + //#define TOUCH_CALIBRATION_Y 8947 + //#define TOUCH_OFFSET_X 342 + //#define TOUCH_OFFSET_Y -19 + + /* MKS Robin TFT v1.1 with R61505 */ + //#define TOUCH_CALIBRATION_X 12489 + //#define TOUCH_CALIBRATION_Y 9210 + //#define TOUCH_OFFSET_X -52 + //#define TOUCH_OFFSET_Y -17 + //#define TOUCH_ORIENTATION TOUCH_LANDSCAPE #if BOTH(TOUCH_SCREEN_CALIBRATION, EEPROM_SETTINGS) diff --git a/config/examples/Mks/Robin/Configuration_adv.h b/config/examples/Mks/Robin/Configuration_adv.h index 5335fa012a..c459ff073b 100644 --- a/config/examples/Mks/Robin/Configuration_adv.h +++ b/config/examples/Mks/Robin/Configuration_adv.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Mks/Robin" + /** * Configuration_adv.h * diff --git a/config/examples/Mks/Robin_Lite3/Configuration.h b/config/examples/Mks/Robin_Lite3/Configuration.h index 78c2dc9160..aa0137a3cb 100644 --- a/config/examples/Mks/Robin_Lite3/Configuration.h +++ b/config/examples/Mks/Robin_Lite3/Configuration.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Mks/Robin_Lite3" + /** * Configuration.h * @@ -84,7 +86,7 @@ */ // Show the Marlin bootscreen on startup. ** ENABLE FOR PRODUCTION ** -#define SHOW_BOOTSCREEN +//#define SHOW_BOOTSCREEN // Show the bitmap in Marlin/_Bootscreen.h on startup. //#define SHOW_CUSTOM_BOOTSCREEN @@ -102,14 +104,21 @@ * * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] */ -#define SERIAL_PORT 0 +#define SERIAL_PORT -1 /** * Select a secondary serial port on the board to use for communication with the host. * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] */ -//#define SERIAL_PORT_2 -1 +// MKS Robin Lite3 AUX-1 and USB Use UART1(PA9-TX,PA10-RX) #define SERIAL_PORT_2 1 +// MKS Robin Pro USB Use UART3(PB10-TX,PB11-RX) #define SERIAL_PORT_2 3 +// MKS RUMBA32 AUX-1 Use UART1(PA9-TX,PA10-RX) #define SERIAL_PORT_2 1 +// MKS SBASE AUX-1 Use UART0(P0.2-TXD0,P0.3-RXD0) #define SERIAL_PORT_2 0 +// MKS SGEN AUX-1 Use UART0(P0.2-TXD0,P0.3-RXD0) #define SERIAL_PORT_2 0 +// MKS SGEN_L AUX-1 Use UART0(P0.2-TXD0,P0.3-RXD0) #define SERIAL_PORT_2 0 +// MKS Robin Nano USB Use UART3(PB10-TX,PB11-RX) #define SERIAL_PORT_2 3 +#define SERIAL_PORT_2 1 /** * Select a third serial port on the board to use for communication with the host. @@ -134,7 +143,7 @@ // Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_RAMPS_14_EFB + #define MOTHERBOARD BOARD_MKS_ROBIN_LITE3 #endif // Name displayed in the LCD "Ready" message and Info menu @@ -806,7 +815,7 @@ * Override with M92 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 500 } +#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 4000, 500 } /** * Default Max Feed Rate (mm/s) @@ -1936,7 +1945,7 @@ * SD Card support is disabled by default. If your controller has an SD slot, * you must uncomment the following option or it won't work. */ -//#define SDSUPPORT +#define SDSUPPORT /** * SD CARD: ENABLE CRC diff --git a/config/examples/Mks/Robin_Pro/Configuration.h b/config/examples/Mks/Robin_Pro/Configuration.h index 78c2dc9160..7e189466e0 100644 --- a/config/examples/Mks/Robin_Pro/Configuration.h +++ b/config/examples/Mks/Robin_Pro/Configuration.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Mks/Robin_Pro" + /** * Configuration.h * @@ -102,14 +104,16 @@ * * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] */ -#define SERIAL_PORT 0 +// Serial port 3 connects to the MKS Robin Pro USB port +#define SERIAL_PORT 3 /** * Select a secondary serial port on the board to use for communication with the host. * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] */ -//#define SERIAL_PORT_2 -1 +// Serial port 1 connects to the MKS Robin Pro Wifi connector +//#define SERIAL_PORT_2 1 /** * Select a third serial port on the board to use for communication with the host. @@ -134,7 +138,7 @@ // Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_RAMPS_14_EFB + #define MOTHERBOARD BOARD_MKS_ROBIN_PRO #endif // Name displayed in the LCD "Ready" message and Info menu @@ -806,7 +810,7 @@ * Override with M92 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 500 } +#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 4000, 500 } /** * Default Max Feed Rate (mm/s) @@ -1936,7 +1940,7 @@ * SD Card support is disabled by default. If your controller has an SD slot, * you must uncomment the following option or it won't work. */ -//#define SDSUPPORT +#define SDSUPPORT /** * SD CARD: ENABLE CRC @@ -2518,17 +2522,17 @@ // // Generic TFT with detailed options // -//#define TFT_GENERIC +#define TFT_GENERIC #if ENABLED(TFT_GENERIC) // :[ 'AUTO', 'ST7735', 'ST7789', 'ST7796', 'R61505', 'ILI9328', 'ILI9341', 'ILI9488' ] #define TFT_DRIVER AUTO // Interface. Enable one of the following options: - //#define TFT_INTERFACE_FSMC + #define TFT_INTERFACE_FSMC //#define TFT_INTERFACE_SPI // TFT Resolution. Enable one of the following options: - //#define TFT_RES_320x240 + #define TFT_RES_320x240 //#define TFT_RES_480x272 //#define TFT_RES_480x320 #endif @@ -2543,7 +2547,7 @@ * For LVGL_UI also copy the 'assets' folder from the build directory to the * root of your SD card, together with the compiled firmware. */ -//#define TFT_CLASSIC_UI +#define TFT_CLASSIC_UI //#define TFT_COLOR_UI //#define TFT_LVGL_UI @@ -2573,17 +2577,17 @@ // // Touch Screen Settings // -//#define TOUCH_SCREEN +#define TOUCH_SCREEN #if ENABLED(TOUCH_SCREEN) - #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens - #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus + #define BUTTON_DELAY_EDIT 75 // (ms) Button repeat delay for edit screens + #define BUTTON_DELAY_MENU 100 // (ms) Button repeat delay for menus #define TOUCH_SCREEN_CALIBRATION - //#define TOUCH_CALIBRATION_X 12316 - //#define TOUCH_CALIBRATION_Y -8981 - //#define TOUCH_OFFSET_X -43 - //#define TOUCH_OFFSET_Y 257 + #define TOUCH_CALIBRATION_X 12316 + #define TOUCH_CALIBRATION_Y -8981 + #define TOUCH_OFFSET_X -43 + #define TOUCH_OFFSET_Y 257 //#define TOUCH_ORIENTATION TOUCH_LANDSCAPE #if BOTH(TOUCH_SCREEN_CALIBRATION, EEPROM_SETTINGS) diff --git a/config/examples/Mks/Sbase/Configuration.h b/config/examples/Mks/Sbase/Configuration.h index 78c2dc9160..fb891b8047 100644 --- a/config/examples/Mks/Sbase/Configuration.h +++ b/config/examples/Mks/Sbase/Configuration.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Mks/Sbase" + /** * Configuration.h * @@ -102,14 +104,14 @@ * * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] */ -#define SERIAL_PORT 0 +#define SERIAL_PORT -1 /** * Select a secondary serial port on the board to use for communication with the host. * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] */ -//#define SERIAL_PORT_2 -1 +//#define SERIAL_PORT_2 0 /** * Select a third serial port on the board to use for communication with the host. @@ -134,7 +136,7 @@ // Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_RAMPS_14_EFB + #define MOTHERBOARD BOARD_MKS_SBASE #endif // Name displayed in the LCD "Ready" message and Info menu @@ -318,13 +320,13 @@ * Enable and connect the power supply to the PS_ON_PIN. * Specify whether the power supply is active HIGH or active LOW. */ -//#define PSU_CONTROL +#define PSU_CONTROL //#define PSU_NAME "Power Supply" #if ENABLED(PSU_CONTROL) #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + #define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power //#define PSU_POWERUP_GCODE "M355 S1" // G-code to run after power-on (e.g., case light on) @@ -416,7 +418,7 @@ * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. */ -#define TEMP_SENSOR_0 1 +#define TEMP_SENSOR_0 5 #define TEMP_SENSOR_1 0 #define TEMP_SENSOR_2 0 #define TEMP_SENSOR_3 0 @@ -424,7 +426,7 @@ #define TEMP_SENSOR_5 0 #define TEMP_SENSOR_6 0 #define TEMP_SENSOR_7 0 -#define TEMP_SENSOR_BED 0 +#define TEMP_SENSOR_BED 5 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 #define TEMP_SENSOR_COOLER 0 @@ -719,11 +721,11 @@ // Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). #define X_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. #define Y_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. +#define Z_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. #define X_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. #define Y_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. #define Z_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_PROBE_ENDSTOP_INVERTING false // Set to true to invert the logic of the probe. +#define Z_MIN_PROBE_ENDSTOP_INVERTING true // Set to true to invert the logic of the probe. /** * Stepper Drivers @@ -743,22 +745,22 @@ * TMC5130, TMC5130_STANDALONE, TMC5160, TMC5160_STANDALONE * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'L6474', 'POWERSTEP01', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2160', 'TMC2160_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC2209', 'TMC2209_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE', 'TMC5160', 'TMC5160_STANDALONE'] */ -#define X_DRIVER_TYPE A4988 -#define Y_DRIVER_TYPE A4988 -#define Z_DRIVER_TYPE A4988 -//#define X2_DRIVER_TYPE A4988 -//#define Y2_DRIVER_TYPE A4988 -//#define Z2_DRIVER_TYPE A4988 -//#define Z3_DRIVER_TYPE A4988 -//#define Z4_DRIVER_TYPE A4988 -#define E0_DRIVER_TYPE A4988 -//#define E1_DRIVER_TYPE A4988 -//#define E2_DRIVER_TYPE A4988 -//#define E3_DRIVER_TYPE A4988 -//#define E4_DRIVER_TYPE A4988 -//#define E5_DRIVER_TYPE A4988 -//#define E6_DRIVER_TYPE A4988 -//#define E7_DRIVER_TYPE A4988 +#define X_DRIVER_TYPE DRV8825 +#define Y_DRIVER_TYPE DRV8825 +#define Z_DRIVER_TYPE DRV8825 +//#define X2_DRIVER_TYPE DRV8825 +//#define Y2_DRIVER_TYPE DRV8825 +//#define Z2_DRIVER_TYPE DRV8825 +//#define Z3_DRIVER_TYPE DRV8825 +//#define Z4_DRIVER_TYPE DRV8825 +#define E0_DRIVER_TYPE DRV8825 +#define E1_DRIVER_TYPE DRV8825 +//#define E2_DRIVER_TYPE DRV8825 +//#define E3_DRIVER_TYPE DRV8825 +//#define E4_DRIVER_TYPE DRV8825 +//#define E5_DRIVER_TYPE DRV8825 +//#define E6_DRIVER_TYPE DRV8825 +//#define E7_DRIVER_TYPE DRV8825 // Enable this feature if all enabled endstop pins are interrupt-capable. // This will remove the need to poll the interrupt pins, saving many CPU cycles. @@ -806,14 +808,14 @@ * Override with M92 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 500 } +#define DEFAULT_AXIS_STEPS_PER_UNIT { 200, 200, 800, 280 } /** * Default Max Feed Rate (mm/s) * Override with M203 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 } +#define DEFAULT_MAX_FEEDRATE { 500, 500, 5, 25 } //#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 #if ENABLED(LIMITED_MAX_FR_EDITING) @@ -826,7 +828,7 @@ * Override with M201 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 } +#define DEFAULT_MAX_ACCELERATION { 9000, 9000, 100, 10000 } //#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 #if ENABLED(LIMITED_MAX_ACCEL_EDITING) @@ -1055,7 +1057,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +#define NOZZLE_TO_PROBE_OFFSET { 32, 5, 0 } // Most probes should stay away from the edges of the bed, but // with NOZZLE_AS_PROBE this can be negative for a wider probing area. @@ -1192,7 +1194,7 @@ // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR false #define INVERT_Y_DIR true -#define INVERT_Z_DIR false +#define INVERT_Z_DIR true // @section extruder @@ -1232,8 +1234,8 @@ // @section machine // The size of the printable area -#define X_BED_SIZE 200 -#define Y_BED_SIZE 200 +#define X_BED_SIZE 213 +#define Y_BED_SIZE 220 // Travel limits (mm) after homing, corresponding to endstop positions. #define X_MIN_POS 0 @@ -1253,15 +1255,15 @@ */ // Min software endstops constrain movement within minimum coordinate bounds -#define MIN_SOFTWARE_ENDSTOPS +//#define MIN_SOFTWARE_ENDSTOPS #if ENABLED(MIN_SOFTWARE_ENDSTOPS) #define MIN_SOFTWARE_ENDSTOP_X #define MIN_SOFTWARE_ENDSTOP_Y #define MIN_SOFTWARE_ENDSTOP_Z #endif -// Max software endstops constrain movement within maximum coordinate bounds -#define MAX_SOFTWARE_ENDSTOPS +// Max software endstops curtail movement above maximum coordinate bounds +//#define MAX_SOFTWARE_ENDSTOPS #if ENABLED(MAX_SOFTWARE_ENDSTOPS) #define MAX_SOFTWARE_ENDSTOP_X #define MAX_SOFTWARE_ENDSTOP_Y @@ -1527,7 +1529,7 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS +#define LEVEL_BED_CORNERS #if ENABLED(LEVEL_BED_CORNERS) #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets @@ -1587,7 +1589,7 @@ // - Move the Z probe (or nozzle) to a defined XY point before Z Homing. // - Prevent Z homing when the Z probe is outside bed area. // -//#define Z_SAFE_HOMING +#define Z_SAFE_HOMING #if ENABLED(Z_SAFE_HOMING) #define Z_SAFE_HOMING_X_POINT X_CENTER // X point for Z homing @@ -1674,7 +1676,7 @@ */ //#define EEPROM_SETTINGS // Persistent storage with M500 and M501 //#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! -#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. +//#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. #define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load #if ENABLED(EEPROM_SETTINGS) //#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. @@ -1709,13 +1711,13 @@ #define PREHEAT_1_TEMP_HOTEND 180 #define PREHEAT_1_TEMP_BED 70 #define PREHEAT_1_TEMP_CHAMBER 35 -#define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 +#define PREHEAT_1_FAN_SPEED 255 // Value from 0 to 255 #define PREHEAT_2_LABEL "ABS" #define PREHEAT_2_TEMP_HOTEND 240 #define PREHEAT_2_TEMP_BED 110 #define PREHEAT_2_TEMP_CHAMBER 35 -#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 +#define PREHEAT_2_FAN_SPEED 255 // Value from 0 to 255 /** * Nozzle Park @@ -1936,7 +1938,7 @@ * SD Card support is disabled by default. If your controller has an SD slot, * you must uncomment the following option or it won't work. */ -//#define SDSUPPORT +#define SDSUPPORT /** * SD CARD: ENABLE CRC diff --git a/config/examples/Mks/Sbase/Configuration_adv.h b/config/examples/Mks/Sbase/Configuration_adv.h index 5335fa012a..b1d6e8b83d 100644 --- a/config/examples/Mks/Sbase/Configuration_adv.h +++ b/config/examples/Mks/Sbase/Configuration_adv.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Mks/Sbase" + /** * Configuration_adv.h * @@ -238,8 +240,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 50 // Seconds + #define THERMAL_PROTECTION_HYSTERESIS 6 // Degrees Celsius //#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops #if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP) @@ -258,7 +260,7 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 20 // Seconds + #define WATCH_TEMP_PERIOD 40 // Seconds #define WATCH_TEMP_INCREASE 2 // Degrees Celsius #endif @@ -266,13 +268,13 @@ * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 110 // Seconds + #define THERMAL_PROTECTION_BED_HYSTERESIS 4 // Degrees Celsius /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds + #define WATCH_BED_TEMP_PERIOD 100 // Seconds #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius #endif @@ -867,7 +869,7 @@ // On a 300mm bed a 5% grade would give a misalignment of ~1.5cm #define G34_MAX_GRADE 5 // (%) Maximum incline that G34 will handle - #define Z_STEPPER_ALIGN_ITERATIONS 5 // Number of iterations to apply during alignment + #define Z_STEPPER_ALIGN_ITERATIONS 3 // Number of iterations to apply during alignment #define Z_STEPPER_ALIGN_ACC 0.02 // Stop iterating early if the accuracy is better than this #define RESTORE_LEVELING_AFTER_G34 // Restore leveling after G34 is done? // After G34, re-home Z (G28 Z) or just calculate it from the last probe heights? @@ -1103,13 +1105,13 @@ * I2C-based DIGIPOTs (e.g., Azteeg X3 Pro) */ //#define DIGIPOT_MCP4018 // Requires https://github.com/felias-fogg/SlowSoftI2CMaster -//#define DIGIPOT_MCP4451 +#define DIGIPOT_MCP4451 #if EITHER(DIGIPOT_MCP4018, DIGIPOT_MCP4451) - #define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT:4 AZTEEG_X3_PRO:8 MKS_SBASE:5 MIGHTYBOARD_REVE:5 + #define DIGIPOT_I2C_NUM_CHANNELS 5 // 5DPRINT:4 AZTEEG_X3_PRO:8 MKS_SBASE:5 MIGHTYBOARD_REVE:5 // Actual motor currents in Amps. The number of entries must match DIGIPOT_I2C_NUM_CHANNELS. // These correspond to the physical drivers, so be mindful if the order is changed. - #define DIGIPOT_I2C_MOTOR_CURRENTS { 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0 } // AZTEEG_X3_PRO + #define DIGIPOT_I2C_MOTOR_CURRENTS { 1.2, 1.2, 1.2, 1.2, 1.2 } // MKS_SBASE //#define DIGIPOT_USE_RAW_VALUES // Use DIGIPOT_MOTOR_CURRENT raw wiper values (instead of A4988 motor currents) @@ -1123,8 +1125,8 @@ * AZTEEG_X5_MINI_WIFI 0x58 0x5C MCP4451 * MIGHTYBOARD_REVE 0x2F (0x5E) MCP4018 */ - //#define DIGIPOT_I2C_ADDRESS_A 0x2C // Unshifted slave address for first DIGIPOT - //#define DIGIPOT_I2C_ADDRESS_B 0x2D // Unshifted slave address for second DIGIPOT + #define DIGIPOT_I2C_ADDRESS_A 0x2C // Unshifted slave address for first DIGIPOT + #define DIGIPOT_I2C_ADDRESS_B 0x2D // Unshifted slave address for second DIGIPOT #endif //=========================================================================== diff --git a/config/examples/Modix/Big60/Configuration.h b/config/examples/Modix/Big60/Configuration.h index 78c2dc9160..22edba4fb5 100644 --- a/config/examples/Modix/Big60/Configuration.h +++ b/config/examples/Modix/Big60/Configuration.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Modix/Big60" + /** * Configuration.h * @@ -69,8 +71,8 @@ // @section info // Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes. -//#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) +#define STRING_CONFIG_H_AUTHOR "3DXtech" // Who made the changes. +#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) /** * *** VENDORS PLEASE READ *** @@ -87,10 +89,10 @@ #define SHOW_BOOTSCREEN // Show the bitmap in Marlin/_Bootscreen.h on startup. -//#define SHOW_CUSTOM_BOOTSCREEN +#define SHOW_CUSTOM_BOOTSCREEN // Show the bitmap in Marlin/_Statusscreen.h on the status screen. -//#define CUSTOM_STATUS_SCREEN_IMAGE +#define CUSTOM_STATUS_SCREEN_IMAGE // @section machine @@ -134,11 +136,11 @@ // Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_RAMPS_14_EFB + #define MOTHERBOARD BOARD_MKS_GEN_L #endif // Name displayed in the LCD "Ready" message and Info menu -//#define CUSTOM_MACHINE_NAME "3D Printer" +#define CUSTOM_MACHINE_NAME "ModixBig60" // Printer's unique ID, used by some programs to differentiate between machines. // Choose your own or use a service like https://www.uuidgenerator.net/version4 @@ -416,7 +418,7 @@ * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. */ -#define TEMP_SENSOR_0 1 +#define TEMP_SENSOR_0 5 #define TEMP_SENSOR_1 0 #define TEMP_SENSOR_2 0 #define TEMP_SENSOR_3 0 @@ -472,7 +474,7 @@ // Above this temperature the heater will be switched off. // This can protect components from overheating, but NOT from shorts and failures. // (Use MINTEMP for thermistor short/failure protection.) -#define HEATER_0_MAXTEMP 275 +#define HEATER_0_MAXTEMP 315 #define HEATER_1_MAXTEMP 275 #define HEATER_2_MAXTEMP 275 #define HEATER_3_MAXTEMP 275 @@ -505,8 +507,8 @@ #define PID_K1 0.95 // Smoothing factor within any PID loop #if ENABLED(PIDTEMP) - //#define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) - //#define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) + #define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) + #define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) // Set/get with gcode: M301 E[extruder number, 0-2] @@ -515,11 +517,11 @@ // If fewer than EXTRUDER values are provided, the last element will be repeated. #define DEFAULT_Kp_LIST { 22.20, 22.20 } #define DEFAULT_Ki_LIST { 1.08, 1.08 } - #define DEFAULT_Kd_LIST { 114.00, 114.00 } + #define DEFAULT_Kd_LIST { 59.50, 59.50 } #else #define DEFAULT_Kp 22.20 #define DEFAULT_Ki 1.08 - #define DEFAULT_Kd 114.00 + #define DEFAULT_Kd 59.50 #endif #endif // PIDTEMP @@ -684,10 +686,10 @@ // Almost all printers will be using one per axis. Probes will use one or more of the // extra connectors. Leave undefined any used for non-endstop and non-probe purposes. #define USE_XMIN_PLUG -#define USE_YMIN_PLUG +//#define USE_YMIN_PLUG #define USE_ZMIN_PLUG //#define USE_XMAX_PLUG -//#define USE_YMAX_PLUG +#define USE_YMAX_PLUG //#define USE_ZMAX_PLUG // Enable pullup for all endstops to prevent a floating state @@ -717,13 +719,13 @@ #endif // Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. +#define X_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. #define Y_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. +#define Z_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. #define X_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. +#define Y_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. #define Z_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_PROBE_ENDSTOP_INVERTING false // Set to true to invert the logic of the probe. +#define Z_MIN_PROBE_ENDSTOP_INVERTING true // Set to true to invert the logic of the probe. /** * Stepper Drivers @@ -806,14 +808,14 @@ * Override with M92 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 500 } +#define DEFAULT_AXIS_STEPS_PER_UNIT { 200, 100, 2000, 418.50 } /** * Default Max Feed Rate (mm/s) * Override with M203 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 } +#define DEFAULT_MAX_FEEDRATE { 200, 200, 5, 70 } //#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 #if ENABLED(LIMITED_MAX_FR_EDITING) @@ -826,7 +828,7 @@ * Override with M201 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 } +#define DEFAULT_MAX_ACCELERATION { 2000, 2000, 100, 10000 } //#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 #if ENABLED(LIMITED_MAX_ACCEL_EDITING) @@ -841,9 +843,9 @@ * M204 R Retract Acceleration * M204 T Travel Acceleration */ -#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves +#define DEFAULT_ACCELERATION 1000 // X, Y, Z and E acceleration for printing moves +#define DEFAULT_RETRACT_ACCELERATION 1000 // E acceleration for retracts +#define DEFAULT_TRAVEL_ACCELERATION 1000 // X, Y, Z acceleration for travel (non printing) moves /** * Default Jerk limits (mm/s) @@ -877,7 +879,7 @@ * https://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html */ #if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.013 // (mm) Distance from real junction edge + #define JUNCTION_DEVIATION_MM 0.06 // (mm) Distance from real junction edge #define JD_HANDLE_SMALL_SEGMENTS // Use curvature estimation instead of just the junction angle // for small segments (< 1mm) with large junction angles (> 135°). #endif @@ -890,7 +892,7 @@ * * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained */ -//#define S_CURVE_ACCELERATION +#define S_CURVE_ACCELERATION //=========================================================================== //============================= Z Probe Options ============================= @@ -946,7 +948,7 @@ * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. * (e.g., an inductive probe or a nozzle-based probe-switch.) */ -//#define FIX_MOUNTED_PROBE +#define FIX_MOUNTED_PROBE /** * Use the nozzle as the probe, as with a conductive @@ -1055,17 +1057,17 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +#define NOZZLE_TO_PROBE_OFFSET { -34, 26, 0 } // Most probes should stay away from the edges of the bed, but // with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed (mm/min) between probes -#define XY_PROBE_FEEDRATE (133*60) +#define XY_PROBE_FEEDRATE (83*60) // Feedrate (mm/min) for the first approach when double-probing (MULTIPLE_PROBING == 2) -#define Z_PROBE_FEEDRATE_FAST (4*60) +#define Z_PROBE_FEEDRATE_FAST (6*60) // Feedrate (mm/min) for the "accurate" probe of each point #define Z_PROBE_FEEDRATE_SLOW (Z_PROBE_FEEDRATE_FAST / 2) @@ -1106,7 +1108,7 @@ * A total of 2 does fast/slow probes with a weighted average. * A total of 3 or more adds more slow probes, taking the average. */ -//#define MULTIPLE_PROBING 2 +#define MULTIPLE_PROBING 2 //#define EXTRA_PROBING 1 /** @@ -1128,14 +1130,14 @@ #define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes //#define Z_AFTER_PROBING 5 // Z position after probing is done -#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping +#define Z_PROBE_LOW_POINT -3 // Farthest distance below the trigger-point to go before stopping // For M851 give a range for adjusting the Z probe offset #define Z_PROBE_OFFSET_RANGE_MIN -20 #define Z_PROBE_OFFSET_RANGE_MAX 20 // Enable the M48 repeatability test to test probe accuracy -//#define Z_MIN_PROBE_REPEATABILITY_TEST +#define Z_MIN_PROBE_REPEATABILITY_TEST // Before deploy/stow pause for user confirmation //#define PAUSE_BEFORE_DEPLOY_STOW @@ -1190,9 +1192,9 @@ // @section machine // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR false +#define INVERT_X_DIR true #define INVERT_Y_DIR true -#define INVERT_Z_DIR false +#define INVERT_Z_DIR true // @section extruder @@ -1226,14 +1228,14 @@ // Direction of endstops when homing; 1=MAX, -1=MIN // :[-1,1] #define X_HOME_DIR -1 -#define Y_HOME_DIR -1 +#define Y_HOME_DIR 1 #define Z_HOME_DIR -1 // @section machine // The size of the printable area -#define X_BED_SIZE 200 -#define Y_BED_SIZE 200 +#define X_BED_SIZE 600 +#define Y_BED_SIZE 600 // Travel limits (mm) after homing, corresponding to endstop positions. #define X_MIN_POS 0 @@ -1241,7 +1243,7 @@ #define Z_MIN_POS 0 #define X_MAX_POS X_BED_SIZE #define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 200 +#define Z_MAX_POS 600 /** * Software Endstops @@ -1285,12 +1287,12 @@ * RAMPS-based boards use SERVO3_PIN for the first runout sensor. * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. */ -//#define FILAMENT_RUNOUT_SENSOR +#define FILAMENT_RUNOUT_SENSOR #if ENABLED(FILAMENT_RUNOUT_SENSOR) #define FIL_RUNOUT_ENABLED_DEFAULT true // Enable the sensor on startup. Override with M412 followed by M500. #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. - #define FIL_RUNOUT_STATE LOW // Pin state indicating that filament is NOT present. + #define FIL_RUNOUT_STATE HIGH // Pin state indicating that filament is NOT present. #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. //#define WATCH_ALL_RUNOUT_SENSORS // Execute runout script on any triggering sensor, not only for the active extruder. @@ -1337,7 +1339,7 @@ // After a runout is detected, continue printing this length of filament // before executing the runout script. Useful for a sensor at the end of // a feed tube. Requires 4 bytes SRAM per sensor, plus 4 bytes overhead. - //#define FILAMENT_RUNOUT_DISTANCE_MM 25 + #define FILAMENT_RUNOUT_DISTANCE_MM 100 #ifdef FILAMENT_RUNOUT_DISTANCE_MM // Enable this option to use an encoder disc that toggles the runout pin @@ -1388,7 +1390,7 @@ //#define AUTO_BED_LEVELING_3POINT //#define AUTO_BED_LEVELING_LINEAR //#define AUTO_BED_LEVELING_BILINEAR -//#define AUTO_BED_LEVELING_UBL +#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING /** @@ -1396,7 +1398,7 @@ * these options to restore the prior leveling state or to always enable * leveling immediately after G28. */ -//#define RESTORE_LEVELING_AFTER_G28 +#define RESTORE_LEVELING_AFTER_G28 //#define ENABLE_LEVELING_AFTER_G28 /** @@ -1438,7 +1440,7 @@ /** * Enable the G26 Mesh Validation Pattern tool. */ - //#define G26_MESH_VALIDATION + #define G26_MESH_VALIDATION #if ENABLED(G26_MESH_VALIDATION) #define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle. #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for G26. @@ -1487,7 +1489,7 @@ //#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh #define MESH_INSET 1 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. + #define GRID_MAX_POINTS_X 15 // Don't use more than 15 points per axis, implementation limited. #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X //#define UBL_HILBERT_CURVE // Use Hilbert distribution for less travel when probing multiple points @@ -1495,7 +1497,7 @@ #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 - //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used + #define UBL_Z_RAISE_WHEN_OFF_MESH 0.0 // When the nozzle is off the mesh, this value is used // as the Z-Height correction value. //#define UBL_MESH_WIZARD // Run several commands in a row to get a complete mesh @@ -1518,22 +1520,22 @@ * Add a bed leveling sub-menu for ABL or MBL. * Include a guided procedure if manual probing is enabled. */ -//#define LCD_BED_LEVELING +#define LCD_BED_LEVELING #if ENABLED(LCD_BED_LEVELING) #define MESH_EDIT_Z_STEP 0.025 // (mm) Step size while manually probing Z axis. #define LCD_PROBE_Z_RANGE 4 // (mm) Z Range centered on Z_MIN_POS for LCD Z adjustment - //#define MESH_EDIT_MENU // Add a menu to edit mesh points + #define MESH_EDIT_MENU // Add a menu to edit mesh points #endif // Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS +#define LEVEL_BED_CORNERS #if ENABLED(LEVEL_BED_CORNERS) #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner + #define LEVEL_CENTER_TOO // Move to the center after the last corner //#define LEVEL_CORNERS_USE_PROBE #if ENABLED(LEVEL_CORNERS_USE_PROBE) #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 @@ -1587,7 +1589,7 @@ // - Move the Z probe (or nozzle) to a defined XY point before Z Homing. // - Prevent Z homing when the Z probe is outside bed area. // -//#define Z_SAFE_HOMING +#define Z_SAFE_HOMING #if ENABLED(Z_SAFE_HOMING) #define Z_SAFE_HOMING_X_POINT X_CENTER // X point for Z homing @@ -1595,7 +1597,7 @@ #endif // Homing speeds (mm/min) -#define HOMING_FEEDRATE_MM_M { (50*60), (50*60), (4*60) } +#define HOMING_FEEDRATE_MM_M { (50*60), (50*60), (6*60) } // Validate that endstops are triggered on homing moves #define VALIDATE_HOMING_ENDSTOPS @@ -1672,12 +1674,12 @@ * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) */ -//#define EEPROM_SETTINGS // Persistent storage with M500 and M501 +#define EEPROM_SETTINGS // Persistent storage with M500 and M501 //#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. #define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load #if ENABLED(EEPROM_SETTINGS) - //#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. + #define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. #endif // @@ -1728,11 +1730,11 @@ * P1 Raise the nozzle always to Z-park height. * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. */ -//#define NOZZLE_PARK_FEATURE +#define NOZZLE_PARK_FEATURE #if ENABLED(NOZZLE_PARK_FEATURE) // Specify a park position as { X, Y, Z_raise } - #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 } + #define NOZZLE_PARK_POINT { (X_MIN_POS + 50), (Y_MIN_POS + 50), 10 } //#define NOZZLE_PARK_X_ONLY // X move only is required to park //#define NOZZLE_PARK_Y_ONLY // Y move only is required to park #define NOZZLE_PARK_Z_RAISE_MIN 2 // (mm) Always raise Z by at least this distance @@ -1936,7 +1938,7 @@ * SD Card support is disabled by default. If your controller has an SD slot, * you must uncomment the following option or it won't work. */ -//#define SDSUPPORT +#define SDSUPPORT /** * SD CARD: ENABLE CRC @@ -2006,7 +2008,7 @@ // // Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. // -//#define INDIVIDUAL_AXIS_HOMING_MENU +#define INDIVIDUAL_AXIS_HOMING_MENU // // SPEAKER/BUZZER @@ -2014,7 +2016,7 @@ // If you have a speaker that can produce tones, enable it here. // By default Marlin assumes you have a buzzer with a fixed frequency. // -//#define SPEAKER +#define SPEAKER // // The duration and frequency for the UI feedback sound. @@ -2195,7 +2197,7 @@ // RepRapDiscount FULL GRAPHIC Smart Controller // https://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller // -//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER +#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER // // K.3D Full Graphic Smart Controller diff --git a/config/examples/Modix/Big60/Configuration_adv.h b/config/examples/Modix/Big60/Configuration_adv.h index 5335fa012a..b352c59ffa 100644 --- a/config/examples/Modix/Big60/Configuration_adv.h +++ b/config/examples/Modix/Big60/Configuration_adv.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Modix/Big60" + /** * Configuration_adv.h * @@ -239,11 +241,11 @@ */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_HYSTERESIS 10 // Degrees Celsius - //#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops + #define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops #if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP) - //#define NO_FAN_SLOWING_IN_PID_TUNING // Don't slow fan speed during M303 + #define NO_FAN_SLOWING_IN_PID_TUNING // Don't slow fan speed during M303 #endif /** @@ -258,7 +260,7 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 20 // Seconds + #define WATCH_TEMP_PERIOD 40 // Seconds #define WATCH_TEMP_INCREASE 2 // Degrees Celsius #endif @@ -741,7 +743,7 @@ //#define HOMING_BACKOFF_POST_MM { 2, 2, 2 } // (mm) Backoff from endstops after homing -//#define QUICK_HOME // If G28 contains XY do a diagonal move first +#define QUICK_HOME // If G28 contains XY do a diagonal move first //#define HOME_Y_BEFORE_X // If G28 contains XY home Y before X //#define HOME_Z_FIRST // Home Z first. Requires a Z-MIN endstop (not a probe). //#define CODEPENDENT_XY_HOMING // If X/Y can't home without homing Y/X first @@ -867,7 +869,7 @@ // On a 300mm bed a 5% grade would give a misalignment of ~1.5cm #define G34_MAX_GRADE 5 // (%) Maximum incline that G34 will handle - #define Z_STEPPER_ALIGN_ITERATIONS 5 // Number of iterations to apply during alignment + #define Z_STEPPER_ALIGN_ITERATIONS 3 // Number of iterations to apply during alignment #define Z_STEPPER_ALIGN_ACC 0.02 // Stop iterating early if the accuracy is better than this #define RESTORE_LEVELING_AFTER_G34 // Restore leveling after G34 is done? // After G34, re-home Z (G28 Z) or just calculate it from the last probe heights? @@ -1219,7 +1221,7 @@ #if HAS_DISPLAY // The timeout (in ms) to return to the status screen from sub-menus - //#define LCD_TIMEOUT_TO_STATUS 15000 + #define LCD_TIMEOUT_TO_STATUS 15000 #if ENABLED(SHOW_BOOTSCREEN) #define BOOTSCREEN_TIMEOUT 4000 // (ms) Total Duration to display the boot screen(s) @@ -1229,13 +1231,13 @@ #endif // Scroll a longer status message into view - //#define STATUS_MESSAGE_SCROLLING + #define STATUS_MESSAGE_SCROLLING // On the Info Screen, display XY with one decimal place when possible //#define LCD_DECIMAL_SMALL_XY // Add an 'M73' G-code to set the current percentage - //#define LCD_SET_PROGRESS_MANUALLY + #define LCD_SET_PROGRESS_MANUALLY // Show the E position (filament used) during printing //#define LCD_SHOW_E_TOTAL @@ -1381,10 +1383,10 @@ //#define UTF_FILENAME_SUPPORT // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT + #define LONG_FILENAME_HOST_SUPPORT // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES + #define SCROLL_LONG_FILENAMES // Leave the heaters on after Stop Print (not recommended!) //#define SD_ABORT_NO_COOLDOWN @@ -1406,7 +1408,7 @@ /** * Auto-report SdCard status with M27 S */ - //#define AUTO_REPORT_SD_STATUS + #define AUTO_REPORT_SD_STATUS /** * Support for USB thumb drives using an Arduino USB Host Shield or @@ -1790,18 +1792,18 @@ * * Warning: Does not respect endstops! */ -//#define BABYSTEPPING +#define BABYSTEPPING #if ENABLED(BABYSTEPPING) //#define INTEGRATED_BABYSTEPPING // EXPERIMENTAL integration of babystepping into the Stepper ISR //#define BABYSTEP_WITHOUT_HOMING - //#define BABYSTEP_ALWAYS_AVAILABLE // Allow babystepping at all times (not just during movement). + #define BABYSTEP_ALWAYS_AVAILABLE // Allow babystepping at all times (not just during movement). //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way //#define BABYSTEP_MILLIMETER_UNITS // Specify BABYSTEP_MULTIPLICATOR_(XY|Z) in mm instead of micro-steps #define BABYSTEP_MULTIPLICATOR_Z 1 // (steps or mm) Steps or millimeter distance for each Z babystep #define BABYSTEP_MULTIPLICATOR_XY 1 // (steps or mm) Steps or millimeter distance for each XY babystep - //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. + #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. // Note: Extra time may be added to mitigate controller latency. @@ -1813,10 +1815,10 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 - //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping + #define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping #if ENABLED(BABYSTEP_ZPROBE_OFFSET) //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - //#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor + #define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif #endif @@ -1837,12 +1839,12 @@ * * See https://marlinfw.org/docs/features/lin_advance.html for full instructions. */ -//#define LIN_ADVANCE +#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) //#define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants - #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed + #define LIN_ADVANCE_K 0.0 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // If enabled, this will generate debug information output over USB. - //#define EXPERIMENTAL_SCURVE // Enable this option to permit S-Curve Acceleration + #define EXPERIMENTAL_SCURVE // Enable this option to permit S-Curve Acceleration #endif // @section leveling @@ -1995,7 +1997,7 @@ #endif // Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes. -//#define BEZIER_CURVE_SUPPORT +#define BEZIER_CURVE_SUPPORT /** * Direct Stepping @@ -2141,7 +2143,7 @@ * Currently handles M108, M112, M410, M876 * NOTE: Not yet implemented for all platforms. */ -//#define EMERGENCY_PARSER +#define EMERGENCY_PARSER /** * Realtime Reporting (requires EMERGENCY_PARSER) @@ -2167,10 +2169,10 @@ // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +#define NO_TIMEOUTS 1000 // Milliseconds // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. -//#define ADVANCED_OK +#define ADVANCED_OK // Printrun may have trouble receiving long strings all at once. // This option inserts short delays between lines of serial output. @@ -2204,7 +2206,7 @@ * * Note that M207 / M208 / M209 settings are saved to EEPROM. */ -//#define FWRETRACT +#define FWRETRACT #if ENABLED(FWRETRACT) #define FWRETRACT_AUTORETRACT // Override slicer retractions #if ENABLED(FWRETRACT_AUTORETRACT) @@ -2311,14 +2313,14 @@ * * Enable PARK_HEAD_ON_PAUSE to add the G-code M125 Pause and Park. */ -//#define ADVANCED_PAUSE_FEATURE +#define ADVANCED_PAUSE_FEATURE #if ENABLED(ADVANCED_PAUSE_FEATURE) #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. - #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. + #define PAUSE_PARK_RETRACT_LENGTH 3 // (mm) Initial retract. // This short retract is done immediately, before parking the nozzle. #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast. #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload. + #define FILAMENT_CHANGE_UNLOAD_LENGTH 50 // (mm) The length of filament for a complete unload. // For Bowden, the full length of the tube and nozzle. // For direct drive, the full length of the nozzle. // Set to 0 for manual unloading. @@ -2327,7 +2329,7 @@ // 0 to disable start loading and skip to fast load only #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast. #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle. + #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 25 // (mm) Load length of filament, from extruder gear to nozzle. // For Bowden, the full length of the tube and nozzle. // For direct drive, the full length of the nozzle. //#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted. @@ -2337,7 +2339,7 @@ // Filament can be extruded repeatedly from the Filament Change menu // until extrusion is consistent, and to purge old filament. #define ADVANCED_PAUSE_RESUME_PRIME 0 // (mm) Extra distance to prime nozzle after returning from park. - //#define ADVANCED_PAUSE_FANS_PAUSE // Turn off print-cooling fans while the machine is paused. + #define ADVANCED_PAUSE_FANS_PAUSE // Turn off print-cooling fans while the machine is paused. // Filament Unload does a Retract, Delay, and Purge first: #define FILAMENT_UNLOAD_PURGE_RETRACT 13 // (mm) Unload initial retract length. @@ -2345,15 +2347,15 @@ #define FILAMENT_UNLOAD_PURGE_LENGTH 8 // (mm) An unretract is done, then this length is purged. #define FILAMENT_UNLOAD_PURGE_FEEDRATE 25 // (mm/s) feedrate to purge before unload - #define PAUSE_PARK_NOZZLE_TIMEOUT 45 // (seconds) Time limit before the nozzle is turned off for safety. + #define PAUSE_PARK_NOZZLE_TIMEOUT 120 // (seconds) Time limit before the nozzle is turned off for safety. #define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed. #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change. - //#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. - //#define HOME_BEFORE_FILAMENT_CHANGE // If needed, home before parking for filament change + #define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. + #define HOME_BEFORE_FILAMENT_CHANGE // If needed, home before parking for filament change - //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. - //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) + #define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. + #define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) #endif // @section tmc @@ -3650,9 +3652,9 @@ * Host Prompt Support enables Marlin to use the host for user prompts so * filament runout and other processes can be managed from the host side. */ -//#define HOST_ACTION_COMMANDS +#define HOST_ACTION_COMMANDS #if ENABLED(HOST_ACTION_COMMANDS) - //#define HOST_PROMPT_SUPPORT + #define HOST_PROMPT_SUPPORT //#define HOST_START_MENU_ITEM // Add a menu item that tells the host to start #endif diff --git a/config/examples/Nextion/Configuration.h b/config/examples/Nextion/Configuration.h index 78c2dc9160..c529e53192 100644 --- a/config/examples/Nextion/Configuration.h +++ b/config/examples/Nextion/Configuration.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Nextion" + /** * Configuration.h * @@ -799,7 +801,7 @@ * following movement settings. If fewer factors are given than the * total number of extruders, the last value applies to the rest. */ -//#define DISTINCT_E_FACTORS +#define DISTINCT_E_FACTORS /** * Default Axis Steps Per Unit (steps/mm) @@ -1672,7 +1674,7 @@ * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) */ -//#define EEPROM_SETTINGS // Persistent storage with M500 and M501 +#define EEPROM_SETTINGS // Persistent storage with M500 and M501 //#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. #define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load @@ -1728,7 +1730,7 @@ * P1 Raise the nozzle always to Z-park height. * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. */ -//#define NOZZLE_PARK_FEATURE +#define NOZZLE_PARK_FEATURE #if ENABLED(NOZZLE_PARK_FEATURE) // Specify a park position as { X, Y, Z_raise } @@ -1845,7 +1847,7 @@ * * View the current statistics with M78. */ -//#define PRINTCOUNTER +#define PRINTCOUNTER #if ENABLED(PRINTCOUNTER) #define PRINTCOUNTER_SAVE_INTERVAL 60 // (minutes) EEPROM save interval during print #endif @@ -1936,7 +1938,7 @@ * SD Card support is disabled by default. If your controller has an SD slot, * you must uncomment the following option or it won't work. */ -//#define SDSUPPORT +#define SDSUPPORT /** * SD CARD: ENABLE CRC @@ -2420,7 +2422,7 @@ // // 320x240 Nextion 2.8" serial TFT Resistive Touch Screen NX3224T028 // -//#define NEXTION_TFT +#define NEXTION_TFT #if ENABLED(NEXTION_TFT) #define LCD_SERIAL_PORT 1 // Default is 1 for Nextion #endif diff --git a/config/examples/Nextion/Configuration_adv.h b/config/examples/Nextion/Configuration_adv.h index 5335fa012a..8475a4b323 100644 --- a/config/examples/Nextion/Configuration_adv.h +++ b/config/examples/Nextion/Configuration_adv.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Nextion" + /** * Configuration_adv.h * @@ -1235,16 +1237,16 @@ //#define LCD_DECIMAL_SMALL_XY // Add an 'M73' G-code to set the current percentage - //#define LCD_SET_PROGRESS_MANUALLY + #define LCD_SET_PROGRESS_MANUALLY // Show the E position (filament used) during printing //#define LCD_SHOW_E_TOTAL #endif #if EITHER(SDSUPPORT, LCD_SET_PROGRESS_MANUALLY) && ANY(HAS_MARLINUI_U8GLIB, HAS_MARLINUI_HD44780, IS_TFTGLCD_PANEL, EXTENSIBLE_UI) - //#define SHOW_REMAINING_TIME // Display estimated time to completion + #define SHOW_REMAINING_TIME // Display estimated time to completion #if ENABLED(SHOW_REMAINING_TIME) - //#define USE_M73_REMAINING_TIME // Use remaining time from M73 command instead of estimation + #define USE_M73_REMAINING_TIME // Use remaining time from M73 command instead of estimation //#define ROTATE_PROGRESS_DISPLAY // Display (P)rogress, (E)lapsed, and (R)emaining time #endif @@ -1476,7 +1478,7 @@ * * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] */ - //#define SDCARD_CONNECTION LCD + #define SDCARD_CONNECTION ONBOARD // Enable if SD detect is rendered useless (e.g., by using an SD extender) //#define NO_SD_DETECT @@ -1837,7 +1839,7 @@ * * See https://marlinfw.org/docs/features/lin_advance.html for full instructions. */ -//#define LIN_ADVANCE +#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) //#define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed @@ -2141,7 +2143,7 @@ * Currently handles M108, M112, M410, M876 * NOTE: Not yet implemented for all platforms. */ -//#define EMERGENCY_PARSER +#define EMERGENCY_PARSER /** * Realtime Reporting (requires EMERGENCY_PARSER) @@ -2311,7 +2313,7 @@ * * Enable PARK_HEAD_ON_PAUSE to add the G-code M125 Pause and Park. */ -//#define ADVANCED_PAUSE_FEATURE +#define ADVANCED_PAUSE_FEATURE #if ENABLED(ADVANCED_PAUSE_FEATURE) #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. @@ -2352,7 +2354,7 @@ //#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. //#define HOME_BEFORE_FILAMENT_CHANGE // If needed, home before parking for filament change - //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. + #define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) #endif diff --git a/config/examples/Ortur 4/Configuration.h b/config/examples/Ortur 4/Configuration.h index 78c2dc9160..83683f715a 100644 --- a/config/examples/Ortur 4/Configuration.h +++ b/config/examples/Ortur 4/Configuration.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Ortur 4" + /** * Configuration.h * @@ -69,7 +71,7 @@ // @section info // Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes. +#define STRING_CONFIG_H_AUTHOR "(AnimaVitis, ORTUR 4.3 V1)" //#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) /** @@ -109,7 +111,7 @@ * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] */ -//#define SERIAL_PORT_2 -1 +#define SERIAL_PORT_2 1 /** * Select a third serial port on the board to use for communication with the host. @@ -134,11 +136,11 @@ // Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_RAMPS_14_EFB + #define MOTHERBOARD BOARD_ORTUR_4 #endif // Name displayed in the LCD "Ready" message and Info menu -//#define CUSTOM_MACHINE_NAME "3D Printer" +#define CUSTOM_MACHINE_NAME "ORTUR 4 V1" // Printer's unique ID, used by some programs to differentiate between machines. // Choose your own or use a service like https://www.uuidgenerator.net/version4 @@ -325,7 +327,7 @@ #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power + //#define PSU_POWERUP_DELAY 100 // (ms) Delay for the PSU to warm up to full power //#define PSU_POWERUP_GCODE "M355 S1" // G-code to run after power-on (e.g., case light on) //#define PSU_POWEROFF_GCODE "M355 S0" // G-code to run before power-off (e.g., case light off) @@ -424,14 +426,14 @@ #define TEMP_SENSOR_5 0 #define TEMP_SENSOR_6 0 #define TEMP_SENSOR_7 0 -#define TEMP_SENSOR_BED 0 +#define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 #define TEMP_SENSOR_COOLER 0 // Dummy thermistor constant temperature readings, for use with 998 and 999 #define DUMMY_THERMISTOR_998_VALUE 25 -#define DUMMY_THERMISTOR_999_VALUE 100 +#define DUMMY_THERMISTOR_999_VALUE 110 // Resistor values when using MAX31865 sensors (-5) on TEMP_SENSOR_0 / 1 //#define MAX31865_SENSOR_OHMS_0 100 // (Ω) Typically 100 or 1000 (PT100 or PT1000) @@ -448,8 +450,8 @@ #define TEMP_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer #define TEMP_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target -#define TEMP_BED_RESIDENCY_TIME 10 // (seconds) Time to wait for bed to "settle" in M190 -#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer +#define TEMP_BED_RESIDENCY_TIME 15 // (seconds) Time to wait for bed to "settle" in M190 +#define TEMP_BED_WINDOW 5 // (°C) Temperature proximity for the "temperature reached" timer #define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target #define TEMP_CHAMBER_RESIDENCY_TIME 10 // (seconds) Time to wait for chamber to "settle" in M191 @@ -472,15 +474,15 @@ // Above this temperature the heater will be switched off. // This can protect components from overheating, but NOT from shorts and failures. // (Use MINTEMP for thermistor short/failure protection.) -#define HEATER_0_MAXTEMP 275 -#define HEATER_1_MAXTEMP 275 +#define HEATER_0_MAXTEMP 315 +#define HEATER_1_MAXTEMP 315 #define HEATER_2_MAXTEMP 275 #define HEATER_3_MAXTEMP 275 #define HEATER_4_MAXTEMP 275 #define HEATER_5_MAXTEMP 275 #define HEATER_6_MAXTEMP 275 #define HEATER_7_MAXTEMP 275 -#define BED_MAXTEMP 150 +#define BED_MAXTEMP 115 #define CHAMBER_MAXTEMP 60 /** @@ -505,21 +507,22 @@ #define PID_K1 0.95 // Smoothing factor within any PID loop #if ENABLED(PIDTEMP) - //#define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) - //#define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) + #define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) + #define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) // Set/get with gcode: M301 E[extruder number, 0-2] + // ORTUR 4 V1 #if ENABLED(PID_PARAMS_PER_HOTEND) // Specify between 1 and HOTENDS values per array. // If fewer than EXTRUDER values are provided, the last element will be repeated. - #define DEFAULT_Kp_LIST { 22.20, 22.20 } - #define DEFAULT_Ki_LIST { 1.08, 1.08 } - #define DEFAULT_Kd_LIST { 114.00, 114.00 } + #define DEFAULT_Kp_LIST { 22.23, 22.23 } + #define DEFAULT_Ki_LIST { 1.68, 1.68 } + #define DEFAULT_Kd_LIST { 73.75, 73.75 } #else - #define DEFAULT_Kp 22.20 - #define DEFAULT_Ki 1.08 - #define DEFAULT_Kd 114.00 + #define DEFAULT_Kp 22.23 + #define DEFAULT_Ki 1.68 + #define DEFAULT_Kd 73.75 #endif #endif // PIDTEMP @@ -540,7 +543,7 @@ * heater. If your configuration is significantly different than this and you don't understand * the issues involved, don't use bed PID until someone else verifies that your hardware works. */ -//#define PIDTEMPBED +#define PIDTEMPBED //#define BED_LIMIT_SWITCHING @@ -556,11 +559,10 @@ //#define MIN_BED_POWER 0 //#define PID_BED_DEBUG // Sends debug data to the serial port. - // 120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - // from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) - #define DEFAULT_bedKp 10.00 - #define DEFAULT_bedKi .023 - #define DEFAULT_bedKd 305.4 + // Ortur 4 V1 90 + #define DEFAULT_bedKp 190.43 + #define DEFAULT_bedKi 30.19 + #define DEFAULT_bedKd 800.81 // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. #endif // PIDTEMPBED @@ -627,14 +629,14 @@ * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** */ #define PREVENT_COLD_EXTRUSION -#define EXTRUDE_MINTEMP 170 +#define EXTRUDE_MINTEMP 180 /** * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. * Note: For Bowden Extruders make this large enough to allow load/unload. */ #define PREVENT_LENGTHY_EXTRUDE -#define EXTRUDE_MAXLENGTH 200 +#define EXTRUDE_MAXLENGTH 700 //=========================================================================== //======================== Thermal Runaway Protection ======================= @@ -717,13 +719,13 @@ #endif // Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. +#define X_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Y_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Z_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. #define X_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. #define Y_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. #define Z_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_PROBE_ENDSTOP_INVERTING false // Set to true to invert the logic of the probe. +#define Z_MIN_PROBE_ENDSTOP_INVERTING true // Set to true to invert the logic of the probe. /** * Stepper Drivers @@ -776,7 +778,7 @@ * * :[2,3,4,5,6,7] */ -//#define ENDSTOP_NOISE_THRESHOLD 2 +#define ENDSTOP_NOISE_THRESHOLD 2 // Check for stuck or disconnected endstops during homing moves. //#define DETECT_BROKEN_ENDSTOP @@ -806,18 +808,18 @@ * Override with M92 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 500 } +#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 97 } /** * Default Max Feed Rate (mm/s) * Override with M203 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 } +#define DEFAULT_MAX_FEEDRATE { 500, 500, 8, 100 } //#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 #if ENABLED(LIMITED_MAX_FR_EDITING) - #define MAX_FEEDRATE_EDIT_VALUES { 600, 600, 10, 50 } // ...or, set your own edit limits + #define MAX_FEEDRATE_EDIT_VALUES { 500, 500, 15, 100 } // ...or, set your own edit limits #endif /** @@ -826,11 +828,11 @@ * Override with M201 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 } +#define DEFAULT_MAX_ACCELERATION { 9000, 9000, 500, 10000 } //#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 #if ENABLED(LIMITED_MAX_ACCEL_EDITING) - #define MAX_ACCEL_EDIT_VALUES { 6000, 6000, 200, 20000 } // ...or, set your own edit limits + #define MAX_ACCEL_EDIT_VALUES { 6000, 5400, 1000, 20000 } // ...or, set your own edit limits #endif /** @@ -855,9 +857,9 @@ */ //#define CLASSIC_JERK #if ENABLED(CLASSIC_JERK) - #define DEFAULT_XJERK 10.0 - #define DEFAULT_YJERK 10.0 - #define DEFAULT_ZJERK 0.3 + #define DEFAULT_XJERK 16.0 + #define DEFAULT_YJERK 15.0 + #define DEFAULT_ZJERK 0.35 //#define TRAVEL_EXTRA_XYJERK 0.0 // Additional jerk allowance for all travel moves @@ -877,7 +879,7 @@ * https://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html */ #if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.013 // (mm) Distance from real junction edge + #define JUNCTION_DEVIATION_MM 0.04 // (mm) Distance from real junction edge #define JD_HANDLE_SMALL_SEGMENTS // Use curvature estimation instead of just the junction angle // for small segments (< 1mm) with large junction angles (> 135°). #endif @@ -906,7 +908,7 @@ * The probe replaces the Z-MIN endstop and is used for Z homing. * (Automatically enables USE_PROBE_FOR_Z_HOMING.) */ -#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN +//#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN // Force the use of the probe for Z-axis homing //#define USE_PROBE_FOR_Z_HOMING @@ -946,7 +948,7 @@ * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. * (e.g., an inductive probe or a nozzle-based probe-switch.) */ -//#define FIX_MOUNTED_PROBE +#define FIX_MOUNTED_PROBE /** * Use the nozzle as the probe, as with a conductive @@ -1055,20 +1057,20 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +#define NOZZLE_TO_PROBE_OFFSET { 0, 14, -0.65 } // Most probes should stay away from the edges of the bed, but // with NOZZLE_AS_PROBE this can be negative for a wider probing area. -#define PROBING_MARGIN 10 +#define PROBING_MARGIN 20 // X and Y axis travel speed (mm/min) between probes #define XY_PROBE_FEEDRATE (133*60) // Feedrate (mm/min) for the first approach when double-probing (MULTIPLE_PROBING == 2) -#define Z_PROBE_FEEDRATE_FAST (4*60) +#define Z_PROBE_FEEDRATE_FAST (8*60)*4 // Feedrate (mm/min) for the "accurate" probe of each point -#define Z_PROBE_FEEDRATE_SLOW (Z_PROBE_FEEDRATE_FAST / 2) +#define Z_PROBE_FEEDRATE_SLOW (Z_PROBE_FEEDRATE_FAST / 8) /** * Probe Activation Switch @@ -1106,7 +1108,7 @@ * A total of 2 does fast/slow probes with a weighted average. * A total of 3 or more adds more slow probes, taking the average. */ -//#define MULTIPLE_PROBING 2 +#define MULTIPLE_PROBING 2 //#define EXTRA_PROBING 1 /** @@ -1124,11 +1126,11 @@ * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. */ #define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow -#define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points -#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes +#define Z_CLEARANCE_BETWEEN_PROBES 10 // Z Clearance between probe points +#define Z_CLEARANCE_MULTI_PROBE 3 // Z Clearance between multiple probes //#define Z_AFTER_PROBING 5 // Z position after probing is done -#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping +#define Z_PROBE_LOW_POINT -6 // Farthest distance below the trigger-point to go before stopping // For M851 give a range for adjusting the Z probe offset #define Z_PROBE_OFFSET_RANGE_MIN -20 @@ -1192,7 +1194,7 @@ // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR false #define INVERT_Y_DIR true -#define INVERT_Z_DIR false +#define INVERT_Z_DIR true // @section extruder @@ -1218,10 +1220,10 @@ */ //#define Z_IDLE_HEIGHT Z_HOME_POS -//#define Z_HOMING_HEIGHT 4 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ... +#define Z_HOMING_HEIGHT 20 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ... // Be sure to have this much clearance over your Z_MAX_POS to prevent grinding. -//#define Z_AFTER_HOMING 10 // (mm) Height to move to after homing Z +#define Z_AFTER_HOMING 20 // (mm) Height to move to after homing Z // Direction of endstops when homing; 1=MAX, -1=MIN // :[-1,1] @@ -1232,16 +1234,16 @@ // @section machine // The size of the printable area -#define X_BED_SIZE 200 -#define Y_BED_SIZE 200 +#define X_BED_SIZE 253 +#define Y_BED_SIZE 305 // Travel limits (mm) after homing, corresponding to endstop positions. -#define X_MIN_POS 0 -#define Y_MIN_POS 0 +#define X_MIN_POS -10.5 +#define Y_MIN_POS -9 #define Z_MIN_POS 0 #define X_MAX_POS X_BED_SIZE #define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 200 +#define Z_MAX_POS 293 /** * Software Endstops @@ -1269,7 +1271,7 @@ #endif #if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS) - //#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD + #define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD #endif /** @@ -1285,7 +1287,7 @@ * RAMPS-based boards use SERVO3_PIN for the first runout sensor. * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. */ -//#define FILAMENT_RUNOUT_SENSOR +#define FILAMENT_RUNOUT_SENSOR #if ENABLED(FILAMENT_RUNOUT_SENSOR) #define FIL_RUNOUT_ENABLED_DEFAULT true // Enable the sensor on startup. Override with M412 followed by M500. #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. @@ -1387,7 +1389,7 @@ */ //#define AUTO_BED_LEVELING_3POINT //#define AUTO_BED_LEVELING_LINEAR -//#define AUTO_BED_LEVELING_BILINEAR +#define AUTO_BED_LEVELING_BILINEAR //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING @@ -1396,7 +1398,7 @@ * these options to restore the prior leveling state or to always enable * leveling immediately after G28. */ -//#define RESTORE_LEVELING_AFTER_G28 +#define RESTORE_LEVELING_AFTER_G28 //#define ENABLE_LEVELING_AFTER_G28 /** @@ -1442,7 +1444,7 @@ #if ENABLED(G26_MESH_VALIDATION) #define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle. #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for G26. - #define MESH_TEST_HOTEND_TEMP 205 // (°C) Default nozzle temperature for G26. + #define MESH_TEST_HOTEND_TEMP 190 // (°C) Default nozzle temperature for G26. #define MESH_TEST_BED_TEMP 60 // (°C) Default bed temperature for G26. #define G26_XY_FEEDRATE 20 // (mm/s) Feedrate for G26 XY moves. #define G26_XY_FEEDRATE_TRAVEL 100 // (mm/s) Feedrate for G26 XY travel moves. @@ -1454,7 +1456,7 @@ #if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR) // Set the number of grid points per dimension. - #define GRID_MAX_POINTS_X 3 + #define GRID_MAX_POINTS_X 5 #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X // Probe along the Y axis, advancing X after each column @@ -1484,10 +1486,10 @@ //========================= Unified Bed Leveling ============================ //=========================================================================== - //#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh + #define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh #define MESH_INSET 1 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. + #define GRID_MAX_POINTS_X 5 // Don't use more than 15 points per axis, implementation limited. #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X //#define UBL_HILBERT_CURVE // Use Hilbert distribution for less travel when probing multiple points @@ -1507,7 +1509,7 @@ //=========================================================================== #define MESH_INSET 10 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 3 // Don't use more than 7 points per axis, implementation limited. + #define GRID_MAX_POINTS_X 5 // Don't use more than 7 points per axis, implementation limited. #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS @@ -1527,12 +1529,12 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS +#define LEVEL_BED_CORNERS #if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define LEVEL_CORNERS_INSET_LFRB { 40, 40, 40, 40 } // (mm) Left, Front, Right, Back insets #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points + #define LEVEL_CORNERS_Z_HOP 6.0 // (mm) Z height of nozzle between leveling points //#define LEVEL_CENTER_TOO // Move to the center after the last corner //#define LEVEL_CORNERS_USE_PROBE #if ENABLED(LEVEL_CORNERS_USE_PROBE) @@ -1565,7 +1567,7 @@ * Commands to execute at the end of G29 probing. * Useful to retract or move the Z probe out of the way. */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" +#define Z_PROBE_END_SCRIPT "G1 Z15 F12000\nG1 X15 Y15\nG1 Z20\nM420 S1\nM420 Z3\nM500" // @section homing @@ -1590,12 +1592,12 @@ //#define Z_SAFE_HOMING #if ENABLED(Z_SAFE_HOMING) - #define Z_SAFE_HOMING_X_POINT X_CENTER // X point for Z homing - #define Z_SAFE_HOMING_Y_POINT Y_CENTER // Y point for Z homing + #define Z_SAFE_HOMING_X_POINT ((X_BED_SIZE) / 13) // X point for Z homing + #define Z_SAFE_HOMING_Y_POINT ((Y_BED_SIZE) / 10) // Y point for Z homing #endif // Homing speeds (mm/min) -#define HOMING_FEEDRATE_MM_M { (50*60), (50*60), (4*60) } +#define HOMING_FEEDRATE_MM_M { (50*60), (50*60), (8*60) } // Validate that endstops are triggered on homing moves #define VALIDATE_HOMING_ENDSTOPS @@ -1630,17 +1632,17 @@ * +-------------->X +-------------->X +-------------->Y * XY_SKEW_FACTOR XZ_SKEW_FACTOR YZ_SKEW_FACTOR */ -//#define SKEW_CORRECTION +#define SKEW_CORRECTION #if ENABLED(SKEW_CORRECTION) // Input all length measurements here: - #define XY_DIAG_AC 282.8427124746 - #define XY_DIAG_BD 282.8427124746 - #define XY_SIDE_AD 200 + #define XY_DIAG_AC 140.4 + #define XY_DIAG_BD 140 + #define XY_SIDE_AD 99.2 // Or, set the default skew factors directly here // to override the above measurements: - #define XY_SKEW_FACTOR 0.0 + //#define XY_SKEW_FACTOR 0.0 //#define SKEW_CORRECTION_FOR_Z #if ENABLED(SKEW_CORRECTION_FOR_Z) @@ -1672,7 +1674,7 @@ * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) */ -//#define EEPROM_SETTINGS // Persistent storage with M500 and M501 +#define EEPROM_SETTINGS // Persistent storage with M500 and M501 //#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. #define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load @@ -1706,14 +1708,14 @@ // Preheat Constants - Up to 5 are supported without changes // #define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 180 -#define PREHEAT_1_TEMP_BED 70 +#define PREHEAT_1_TEMP_HOTEND 190 +#define PREHEAT_1_TEMP_BED 60 #define PREHEAT_1_TEMP_CHAMBER 35 #define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 #define PREHEAT_2_LABEL "ABS" #define PREHEAT_2_TEMP_HOTEND 240 -#define PREHEAT_2_TEMP_BED 110 +#define PREHEAT_2_TEMP_BED 90 #define PREHEAT_2_TEMP_CHAMBER 35 #define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 @@ -1728,11 +1730,11 @@ * P1 Raise the nozzle always to Z-park height. * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. */ -//#define NOZZLE_PARK_FEATURE +#define NOZZLE_PARK_FEATURE #if ENABLED(NOZZLE_PARK_FEATURE) // Specify a park position as { X, Y, Z_raise } - #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 } + #define NOZZLE_PARK_POINT { (X_MIN_POS), (Y_MAX_POS), 20 } //#define NOZZLE_PARK_X_ONLY // X move only is required to park //#define NOZZLE_PARK_Y_ONLY // Y move only is required to park #define NOZZLE_PARK_Z_RAISE_MIN 2 // (mm) Always raise Z by at least this distance @@ -1777,19 +1779,19 @@ * Caveats: The ending Z should be the same as starting Z. * Attention: EXPERIMENTAL. G-code arguments may change. */ -//#define NOZZLE_CLEAN_FEATURE +#define NOZZLE_CLEAN_FEATURE #if ENABLED(NOZZLE_CLEAN_FEATURE) // Default number of pattern repetitions #define NOZZLE_CLEAN_STROKES 12 // Default number of triangles - #define NOZZLE_CLEAN_TRIANGLES 3 + #define NOZZLE_CLEAN_TRIANGLES 6 // Specify positions for each tool as { { X, Y, Z }, { X, Y, Z } } // Dual hotend system may use { { -20, (Y_BED_SIZE / 2), (Z_MIN_POS + 1) }, { 420, (Y_BED_SIZE / 2), (Z_MIN_POS + 1) }} - #define NOZZLE_CLEAN_START_POINT { { 30, 30, (Z_MIN_POS + 1) } } - #define NOZZLE_CLEAN_END_POINT { { 100, 60, (Z_MIN_POS + 1) } } + #define NOZZLE_CLEAN_START_POINT { { 245, 0, (Z_MIN_POS + 3) } } + #define NOZZLE_CLEAN_END_POINT { { 260, 55, (Z_MIN_POS + 3) } } // Circular pattern radius #define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5 @@ -1845,7 +1847,7 @@ * * View the current statistics with M78. */ -//#define PRINTCOUNTER +#define PRINTCOUNTER #if ENABLED(PRINTCOUNTER) #define PRINTCOUNTER_SAVE_INTERVAL 60 // (minutes) EEPROM save interval during print #endif @@ -1936,7 +1938,7 @@ * SD Card support is disabled by default. If your controller has an SD slot, * you must uncomment the following option or it won't work. */ -//#define SDSUPPORT +#define SDSUPPORT /** * SD CARD: ENABLE CRC @@ -1983,7 +1985,7 @@ // // Set this option if CLOCKWISE causes values to DECREASE // -//#define REVERSE_ENCODER_DIRECTION +#define REVERSE_ENCODER_DIRECTION // // This option reverses the encoder direction for navigating LCD menus. @@ -2014,7 +2016,7 @@ // If you have a speaker that can produce tones, enable it here. // By default Marlin assumes you have a buzzer with a fixed frequency. // -//#define SPEAKER +#define SPEAKER // // The duration and frequency for the UI feedback sound. @@ -2023,8 +2025,8 @@ // Note: Test audio output with the G-Code: // M300 S P // -//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 -//#define LCD_FEEDBACK_FREQUENCY_HZ 5000 +#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 +#define LCD_FEEDBACK_FREQUENCY_HZ 5000 //============================================================================= //======================== LCD / Controller Selection ========================= @@ -2195,7 +2197,7 @@ // RepRapDiscount FULL GRAPHIC Smart Controller // https://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller // -//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER +#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER // // K.3D Full Graphic Smart Controller diff --git a/config/examples/Ortur 4/Configuration_adv.h b/config/examples/Ortur 4/Configuration_adv.h index 5335fa012a..c0586667a7 100644 --- a/config/examples/Ortur 4/Configuration_adv.h +++ b/config/examples/Ortur 4/Configuration_adv.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Ortur 4" + /** * Configuration_adv.h * @@ -238,8 +240,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 60 // Seconds + #define THERMAL_PROTECTION_HYSTERESIS 5 // Degrees Celsius //#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops #if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP) @@ -258,7 +260,7 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 20 // Seconds + #define WATCH_TEMP_PERIOD 90 // Seconds #define WATCH_TEMP_INCREASE 2 // Degrees Celsius #endif @@ -266,13 +268,13 @@ * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_BED_PERIOD 90 // Seconds #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds + #define WATCH_BED_TEMP_PERIOD 90 // Seconds #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius #endif @@ -648,7 +650,7 @@ // // For Z set the number of stepper drivers // -#define NUM_Z_STEPPER_DRIVERS 1 // (1-4) Z options change based on how many +#define NUM_Z_STEPPER_DRIVERS 2 // (1-4) Z options change based on how many #if NUM_Z_STEPPER_DRIVERS > 1 // Enable if Z motor direction signals are the opposite of Z1 @@ -821,12 +823,12 @@ * Z Steppers Auto-Alignment * Add the G34 command to align multiple Z steppers using a bed probe. */ -//#define Z_STEPPER_AUTO_ALIGN +#define Z_STEPPER_AUTO_ALIGN #if ENABLED(Z_STEPPER_AUTO_ALIGN) // Define probe X and Y positions for Z1, Z2 [, Z3 [, Z4]] // If not defined, probe limits will be used. // Override with 'M422 S X Y' - //#define Z_STEPPER_ALIGN_XY { { 10, 190 }, { 100, 10 }, { 190, 190 } } + //#define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } /** * Orientation for the automatically-calculated probe positions. @@ -848,7 +850,7 @@ * | 1 2 | 2 3 | 3 4 | 4 1 | */ #ifndef Z_STEPPER_ALIGN_XY - //#define Z_STEPPERS_ORIENTATION 0 + #define Z_STEPPERS_ORIENTATION 0 #endif // Provide Z stepper positions for more rapid convergence in bed alignment. @@ -867,7 +869,7 @@ // On a 300mm bed a 5% grade would give a misalignment of ~1.5cm #define G34_MAX_GRADE 5 // (%) Maximum incline that G34 will handle - #define Z_STEPPER_ALIGN_ITERATIONS 5 // Number of iterations to apply during alignment + #define Z_STEPPER_ALIGN_ITERATIONS 3 // Number of iterations to apply during alignment #define Z_STEPPER_ALIGN_ACC 0.02 // Stop iterating early if the accuracy is better than this #define RESTORE_LEVELING_AFTER_G34 // Restore leveling after G34 is done? // After G34, re-home Z (G28 Z) or just calculate it from the last probe heights? @@ -1059,7 +1061,7 @@ * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the * lowest stepping frequencies. */ -//#define ADAPTIVE_STEP_SMOOTHING +#define ADAPTIVE_STEP_SMOOTHING /** * Custom Microstepping @@ -1175,7 +1177,7 @@ #endif // Include a page of printer information in the LCD Main Menu - //#define LCD_INFO_MENU + #define LCD_INFO_MENU #if ENABLED(LCD_INFO_MENU) //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages #endif @@ -1222,7 +1224,7 @@ //#define LCD_TIMEOUT_TO_STATUS 15000 #if ENABLED(SHOW_BOOTSCREEN) - #define BOOTSCREEN_TIMEOUT 4000 // (ms) Total Duration to display the boot screen(s) + #define BOOTSCREEN_TIMEOUT 2000 // (ms) Total Duration to display the boot screen(s) #if EITHER(HAS_MARLINUI_U8GLIB, TFT_COLOR_UI) #define BOOT_MARLIN_LOGO_SMALL // Show a smaller Marlin logo on the Boot Screen (saving lots of flash) #endif @@ -1235,17 +1237,17 @@ //#define LCD_DECIMAL_SMALL_XY // Add an 'M73' G-code to set the current percentage - //#define LCD_SET_PROGRESS_MANUALLY + #define LCD_SET_PROGRESS_MANUALLY // Show the E position (filament used) during printing //#define LCD_SHOW_E_TOTAL #endif #if EITHER(SDSUPPORT, LCD_SET_PROGRESS_MANUALLY) && ANY(HAS_MARLINUI_U8GLIB, HAS_MARLINUI_HD44780, IS_TFTGLCD_PANEL, EXTENSIBLE_UI) - //#define SHOW_REMAINING_TIME // Display estimated time to completion + #define SHOW_REMAINING_TIME // Display estimated time to completion #if ENABLED(SHOW_REMAINING_TIME) //#define USE_M73_REMAINING_TIME // Use remaining time from M73 command instead of estimation - //#define ROTATE_PROGRESS_DISPLAY // Display (P)rogress, (E)lapsed, and (R)emaining time + #define ROTATE_PROGRESS_DISPLAY // Display (P)rogress, (E)lapsed, and (R)emaining time #endif #if EITHER(HAS_MARLINUI_U8GLIB, EXTENSIBLE_UI) @@ -1315,13 +1317,13 @@ * an option on the LCD screen to continue the print from the last-known * point in the file. */ - //#define POWER_LOSS_RECOVERY + #define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) //#define BACKUP_POWER_SUPPLY // Backup power / UPS to move the steppers on power loss //#define POWER_LOSS_ZRAISE 2 // (mm) Z axis raise on resume (on power loss with UPS) - //#define POWER_LOSS_PIN 44 // Pin to detect power loss. Set to -1 to disable default pin on boards without module. - //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss + #define POWER_LOSS_PIN 64 // Pin to detect power loss. Set to -1 to disable default pin on boards without module. + #define POWER_LOSS_STATE LOW // State of pin indicating power loss //#define POWER_LOSS_PULLUP // Set pullup / pulldown as appropriate for your sensor //#define POWER_LOSS_PULLDOWN //#define POWER_LOSS_PURGE_LEN 20 // (mm) Length of filament to purge on resume @@ -1512,7 +1514,7 @@ */ #if HAS_MARLINUI_U8GLIB // Show SD percentage next to the progress bar - //#define DOGM_SD_PERCENT + #define DOGM_SD_PERCENT // Save many cycles by drawing a hollow frame or no frame on the Info Screen //#define XYZ_NO_FRAME @@ -1547,7 +1549,7 @@ #if ENABLED(U8GLIB_ST7920) // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 + #define DOGM_SPI_DELAY_US 9 //#define LIGHTWEIGHT_UI #if ENABLED(LIGHTWEIGHT_UI) @@ -1560,25 +1562,25 @@ * These options may affect code size and screen render time. * Custom status screens can forcibly override these settings. */ - //#define STATUS_COMBINE_HEATERS // Use combined heater images instead of separate ones + #define STATUS_COMBINE_HEATERS // Use combined heater images instead of separate ones //#define STATUS_HOTEND_NUMBERLESS // Use plain hotend icons instead of numbered ones (with 2+ hotends) #define STATUS_HOTEND_INVERTED // Show solid nozzle bitmaps when heating (Requires STATUS_HOTEND_ANIM) #define STATUS_HOTEND_ANIM // Use a second bitmap to indicate hotend heating #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating - #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating + //#define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating //#define STATUS_CUTTER_ANIM // Use a second bitmap to indicate spindle / laser active //#define STATUS_COOLER_ANIM // Use a second bitmap to indicate laser cooling //#define STATUS_FLOWMETER_ANIM // Use multiple bitmaps to indicate coolant flow - //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap - //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap + #define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap + #define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames //#define STATUS_HEAT_PERCENT // Show heating in a progress bar - //#define BOOT_MARLIN_LOGO_ANIMATED // Animated Marlin logo. Costs ~‭3260 (or ~940) bytes of PROGMEM. + #define BOOT_MARLIN_LOGO_ANIMATED // Animated Marlin logo. Costs ~‭3260 (or ~940) bytes of PROGMEM. // Frivolous Game Options - //#define MARLIN_BRICKOUT - //#define MARLIN_INVADERS - //#define MARLIN_SNAKE + #define MARLIN_BRICKOUT + #define MARLIN_INVADERS + #define MARLIN_SNAKE //#define GAMES_EASTER_EGG // Add extra blank lines above the "Games" sub-menu #endif // HAS_MARLINUI_U8GLIB @@ -1587,7 +1589,7 @@ // Additional options for DGUS / DWIN displays // #if HAS_DGUS_LCD - #define LCD_SERIAL_PORT 3 + #define LCD_SERIAL_PORT 2 #define LCD_BAUDRATE 115200 #define DGUS_RX_BUFFER_SIZE 128 @@ -1790,7 +1792,7 @@ * * Warning: Does not respect endstops! */ -//#define BABYSTEPPING +#define BABYSTEPPING #if ENABLED(BABYSTEPPING) //#define INTEGRATED_BABYSTEPPING // EXPERIMENTAL integration of babystepping into the Stepper ISR //#define BABYSTEP_WITHOUT_HOMING @@ -1798,10 +1800,10 @@ //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way //#define BABYSTEP_MILLIMETER_UNITS // Specify BABYSTEP_MULTIPLICATOR_(XY|Z) in mm instead of micro-steps - #define BABYSTEP_MULTIPLICATOR_Z 1 // (steps or mm) Steps or millimeter distance for each Z babystep - #define BABYSTEP_MULTIPLICATOR_XY 1 // (steps or mm) Steps or millimeter distance for each XY babystep + #define BABYSTEP_MULTIPLICATOR_Z 2 // (steps or mm) Steps or millimeter distance for each Z babystep + #define BABYSTEP_MULTIPLICATOR_XY 2 // (steps or mm) Steps or millimeter distance for each XY babystep - //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. + #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. // Note: Extra time may be added to mitigate controller latency. @@ -1813,7 +1815,7 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 - //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping + #define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping #if ENABLED(BABYSTEP_ZPROBE_OFFSET) //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor @@ -1837,10 +1839,10 @@ * * See https://marlinfw.org/docs/features/lin_advance.html for full instructions. */ -//#define LIN_ADVANCE +#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) //#define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants - #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed + #define LIN_ADVANCE_K 0 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // If enabled, this will generate debug information output over USB. //#define EXPERIMENTAL_SCURVE // Enable this option to permit S-Curve Acceleration #endif @@ -2036,8 +2038,8 @@ * * Override the default value based on the driver type set in Configuration.h. */ -//#define MINIMUM_STEPPER_POST_DIR_DELAY 650 -//#define MINIMUM_STEPPER_PRE_DIR_DELAY 650 +#define MINIMUM_STEPPER_POST_DIR_DELAY 200 +#define MINIMUM_STEPPER_PRE_DIR_DELAY 200 /** * Minimum stepper driver pulse width (in µs) @@ -2050,7 +2052,7 @@ * * Override the default value based on the driver type set in Configuration.h. */ -//#define MINIMUM_STEPPER_PULSE 2 +#define MINIMUM_STEPPER_PULSE 1 /** * Maximum stepping rate (in Hz) the stepper driver allows @@ -2064,7 +2066,7 @@ * * Override the default value based on the driver type set in Configuration.h. */ -//#define MAXIMUM_STEPPER_RATE 250000 +#define MAXIMUM_STEPPER_RATE 500000 // @section temperature @@ -2204,20 +2206,20 @@ * * Note that M207 / M208 / M209 settings are saved to EEPROM. */ -//#define FWRETRACT +#define FWRETRACT #if ENABLED(FWRETRACT) #define FWRETRACT_AUTORETRACT // Override slicer retractions #if ENABLED(FWRETRACT_AUTORETRACT) #define MIN_AUTORETRACT 0.1 // (mm) Don't convert E moves under this length #define MAX_AUTORETRACT 10.0 // (mm) Don't convert E moves over this length #endif - #define RETRACT_LENGTH 3 // (mm) Default retract length (positive value) + #define RETRACT_LENGTH 4 // (mm) Default retract length (positive value) #define RETRACT_LENGTH_SWAP 13 // (mm) Default swap retract length (positive value) #define RETRACT_FEEDRATE 45 // (mm/s) Default feedrate for retracting - #define RETRACT_ZRAISE 0 // (mm) Default retract Z-raise - #define RETRACT_RECOVER_LENGTH 0 // (mm) Default additional recover length (added to retract length on recover) + #define RETRACT_ZRAISE 0.1 // (mm) Default retract Z-raise + #define RETRACT_RECOVER_LENGTH -0.1 // (mm) Default additional recover length (added to retract length on recover) #define RETRACT_RECOVER_LENGTH_SWAP 0 // (mm) Default additional swap recover length (added to retract length on recover from toolchange) - #define RETRACT_RECOVER_FEEDRATE 8 // (mm/s) Default feedrate for recovering from retraction + #define RETRACT_RECOVER_FEEDRATE 45 // (mm/s) Default feedrate for recovering from retraction #define RETRACT_RECOVER_FEEDRATE_SWAP 8 // (mm/s) Default feedrate for recovering from swap retraction #if ENABLED(MIXING_EXTRUDER) //#define RETRACT_SYNC_MIXING // Retract and restore all mixing steppers simultaneously @@ -2311,28 +2313,28 @@ * * Enable PARK_HEAD_ON_PAUSE to add the G-code M125 Pause and Park. */ -//#define ADVANCED_PAUSE_FEATURE +#define ADVANCED_PAUSE_FEATURE #if ENABLED(ADVANCED_PAUSE_FEATURE) #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. // This short retract is done immediately, before parking the nozzle. #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast. #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload. + #define FILAMENT_CHANGE_UNLOAD_LENGTH 600 // (mm) The length of filament for a complete unload. // For Bowden, the full length of the tube and nozzle. // For direct drive, the full length of the nozzle. // Set to 0 for manual unloading. #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE 6 // (mm/s) Slow move when starting load. #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 0 // (mm) Slow length, to allow time to insert material. // 0 to disable start loading and skip to fast load only - #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast. - #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle. + #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 8 // (mm/s) Load filament feedrate. This can be pretty fast. + #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 10 // (mm/s^2) Lower acceleration may allow a faster feedrate. + #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 400 // (mm) Load length of filament, from extruder gear to nozzle. // For Bowden, the full length of the tube and nozzle. // For direct drive, the full length of the nozzle. //#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted. #define ADVANCED_PAUSE_PURGE_FEEDRATE 3 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate. - #define ADVANCED_PAUSE_PURGE_LENGTH 50 // (mm) Length to extrude after loading. + #define ADVANCED_PAUSE_PURGE_LENGTH 20 // (mm) Length to extrude after loading. // Set to 0 for manual extrusion. // Filament can be extruded repeatedly from the Filament Change menu // until extrusion is consistent, and to purge old filament. @@ -2349,8 +2351,8 @@ #define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed. #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change. - //#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. - //#define HOME_BEFORE_FILAMENT_CHANGE // If needed, home before parking for filament change + #define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. + #define HOME_BEFORE_FILAMENT_CHANGE // If needed, home before parking for filament change //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) @@ -3546,29 +3548,29 @@ */ // Custom Menu: Main Menu -//#define CUSTOM_MENU_MAIN +#define CUSTOM_MENU_MAIN #if ENABLED(CUSTOM_MENU_MAIN) //#define CUSTOM_MENU_MAIN_TITLE "Custom Commands" #define CUSTOM_MENU_MAIN_SCRIPT_DONE "M117 User Script Done" #define CUSTOM_MENU_MAIN_SCRIPT_AUDIBLE_FEEDBACK - //#define CUSTOM_MENU_MAIN_SCRIPT_RETURN // Return to status screen after a script + #define CUSTOM_MENU_MAIN_SCRIPT_RETURN // Return to status screen after a script #define CUSTOM_MENU_MAIN_ONLY_IDLE // Only show custom menu when the machine is idle - #define MAIN_MENU_ITEM_1_DESC "Home & UBL Info" - #define MAIN_MENU_ITEM_1_GCODE "G28\nG29 W" + #define MAIN_MENU_ITEM_1_DESC "T°_lit/pos_init/Niv_plat" + #define MAIN_MENU_ITEM_1_GCODE "M140 S60\nM190 S60\nM117 Position initial\nG28\nM117 Nivelage du plateau\nG29\nM420 S1\nM420 Z5\nM500" //#define MAIN_MENU_ITEM_1_CONFIRM // Show a confirmation dialog before this action - #define MAIN_MENU_ITEM_2_DESC "Preheat for " PREHEAT_1_LABEL - #define MAIN_MENU_ITEM_2_GCODE "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND) + #define MAIN_MENU_ITEM_2_DESC "Net_buse plus " + #define MAIN_MENU_ITEM_2_GCODE "M104 S210 \nM109 S210 \nG28 \nG12 P1" //#define MAIN_MENU_ITEM_2_CONFIRM - //#define MAIN_MENU_ITEM_3_DESC "Preheat for " PREHEAT_2_LABEL + //#define MAIN_MENU_ITEM_3_DESC "Préchauffage " PREHEAT_2_LABEL //#define MAIN_MENU_ITEM_3_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) //#define MAIN_MENU_ITEM_3_CONFIRM - //#define MAIN_MENU_ITEM_4_DESC "Heat Bed/Home/Level" - //#define MAIN_MENU_ITEM_4_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29" - //#define MAIN_MENU_ITEM_4_CONFIRM + #define MAIN_MENU_ITEM_3_DESC "Net_buse NORMAL" + #define MAIN_MENU_ITEM_3_GCODE "G28 \nG12" + //#define MAIN_MENU_ITEM_3_CONFIRM //#define MAIN_MENU_ITEM_5_DESC "Home & Info" //#define MAIN_MENU_ITEM_5_GCODE "G28\nM503" @@ -3661,10 +3663,7 @@ * * Implement M486 to allow Marlin to skip objects */ -//#define CANCEL_OBJECTS -#if ENABLED(CANCEL_OBJECTS) - #define CANCEL_OBJECTS_REPORTING // Emit the current object as a status message -#endif +#define CANCEL_OBJECTS /** * I2C position encoders for closed loop control. diff --git a/config/examples/Printrbot/PrintrboardG2/Configuration.h b/config/examples/Printrbot/PrintrboardG2/Configuration.h index 78c2dc9160..a18b9a90c0 100644 --- a/config/examples/Printrbot/PrintrboardG2/Configuration.h +++ b/config/examples/Printrbot/PrintrboardG2/Configuration.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Printrbot/PrintrboardG2" + /** * Configuration.h * @@ -102,14 +104,15 @@ * * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] */ -#define SERIAL_PORT 0 +#define SERIAL_PORT -1 /** * Select a secondary serial port on the board to use for communication with the host. * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] */ -//#define SERIAL_PORT_2 -1 +// For programming port do NOT define +#define SERIAL_PORT_2 0 // For native port /** * Select a third serial port on the board to use for communication with the host. @@ -127,14 +130,14 @@ * * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ -#define BAUDRATE 250000 +#define BAUDRATE 115200 // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH // Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_RAMPS_14_EFB + #define MOTHERBOARD BOARD_PRINTRBOARD_G2 #endif // Name displayed in the LCD "Ready" message and Info menu @@ -424,7 +427,7 @@ #define TEMP_SENSOR_5 0 #define TEMP_SENSOR_6 0 #define TEMP_SENSOR_7 0 -#define TEMP_SENSOR_BED 0 +#define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 #define TEMP_SENSOR_COOLER 0 @@ -626,7 +629,7 @@ * * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** */ -#define PREVENT_COLD_EXTRUSION +//#define PREVENT_COLD_EXTRUSION #define EXTRUDE_MINTEMP 170 /** @@ -684,10 +687,10 @@ // Almost all printers will be using one per axis. Probes will use one or more of the // extra connectors. Leave undefined any used for non-endstop and non-probe purposes. #define USE_XMIN_PLUG -#define USE_YMIN_PLUG +//#define USE_YMIN_PLUG #define USE_ZMIN_PLUG //#define USE_XMAX_PLUG -//#define USE_YMAX_PLUG +#define USE_YMAX_PLUG //#define USE_ZMAX_PLUG // Enable pullup for all endstops to prevent a floating state @@ -717,13 +720,13 @@ #endif // Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define X_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_PROBE_ENDSTOP_INVERTING false // Set to true to invert the logic of the probe. +#define X_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Y_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Z_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define X_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Y_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Z_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Z_MIN_PROBE_ENDSTOP_INVERTING true // Set to true to invert the logic of the probe. /** * Stepper Drivers @@ -743,22 +746,22 @@ * TMC5130, TMC5130_STANDALONE, TMC5160, TMC5160_STANDALONE * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'L6474', 'POWERSTEP01', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2160', 'TMC2160_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC2209', 'TMC2209_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE', 'TMC5160', 'TMC5160_STANDALONE'] */ -#define X_DRIVER_TYPE A4988 -#define Y_DRIVER_TYPE A4988 -#define Z_DRIVER_TYPE A4988 -//#define X2_DRIVER_TYPE A4988 -//#define Y2_DRIVER_TYPE A4988 -//#define Z2_DRIVER_TYPE A4988 -//#define Z3_DRIVER_TYPE A4988 -//#define Z4_DRIVER_TYPE A4988 -#define E0_DRIVER_TYPE A4988 -//#define E1_DRIVER_TYPE A4988 -//#define E2_DRIVER_TYPE A4988 -//#define E3_DRIVER_TYPE A4988 -//#define E4_DRIVER_TYPE A4988 -//#define E5_DRIVER_TYPE A4988 -//#define E6_DRIVER_TYPE A4988 -//#define E7_DRIVER_TYPE A4988 +#define X_DRIVER_TYPE DRV8825 +#define Y_DRIVER_TYPE DRV8825 +#define Z_DRIVER_TYPE DRV8825 +//#define X2_DRIVER_TYPE DRV8825 +//#define Y2_DRIVER_TYPE DRV8825 +//#define Z2_DRIVER_TYPE DRV8825 +//#define Z3_DRIVER_TYPE DRV8825 +//#define Z4_DRIVER_TYPE DRV8825 +#define E0_DRIVER_TYPE DRV8825 +//#define E1_DRIVER_TYPE DRV8825 +//#define E2_DRIVER_TYPE DRV8825 +//#define E3_DRIVER_TYPE DRV8825 +//#define E4_DRIVER_TYPE DRV8825 +//#define E5_DRIVER_TYPE DRV8825 +//#define E6_DRIVER_TYPE DRV8825 +//#define E7_DRIVER_TYPE DRV8825 // Enable this feature if all enabled endstop pins are interrupt-capable. // This will remove the need to poll the interrupt pins, saving many CPU cycles. @@ -806,18 +809,18 @@ * Override with M92 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 500 } +#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 80, 80 } /** * Default Max Feed Rate (mm/s) * Override with M203 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 } +#define DEFAULT_MAX_FEEDRATE { 30, 30,30,30 } //#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 #if ENABLED(LIMITED_MAX_FR_EDITING) - #define MAX_FEEDRATE_EDIT_VALUES { 600, 600, 10, 50 } // ...or, set your own edit limits + #define MAX_FEEDRATE_EDIT_VALUES { 600, 600, 10, 50 } // ...or, set your own edit limits #endif /** @@ -826,11 +829,11 @@ * Override with M201 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 } +#define DEFAULT_MAX_ACCELERATION { 100, 100, 100, 100 } //#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 #if ENABLED(LIMITED_MAX_ACCEL_EDITING) - #define MAX_ACCEL_EDIT_VALUES { 6000, 6000, 200, 20000 } // ...or, set your own edit limits + #define MAX_ACCEL_EDIT_VALUES { 6000, 6000, 200, 20000 } // ...or, set your own edit limits #endif /** @@ -841,9 +844,10 @@ * M204 R Retract Acceleration * M204 T Travel Acceleration */ -#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves + +#define DEFAULT_ACCELERATION 100 // X, Y, Z and E acceleration for printing moves +#define DEFAULT_RETRACT_ACCELERATION 100 // E acceleration for retracts +#define DEFAULT_TRAVEL_ACCELERATION 100 // X, Y, Z acceleration for travel (non printing) moves /** * Default Jerk limits (mm/s) @@ -855,8 +859,8 @@ */ //#define CLASSIC_JERK #if ENABLED(CLASSIC_JERK) - #define DEFAULT_XJERK 10.0 - #define DEFAULT_YJERK 10.0 + #define DEFAULT_XJERK 1.0 + #define DEFAULT_YJERK 1.0 #define DEFAULT_ZJERK 0.3 //#define TRAVEL_EXTRA_XYJERK 0.0 // Additional jerk allowance for all travel moves @@ -877,7 +881,7 @@ * https://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html */ #if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.013 // (mm) Distance from real junction edge + #define JUNCTION_DEVIATION_MM 0.004 // (mm) Distance from real junction edge #define JD_HANDLE_SMALL_SEGMENTS // Use curvature estimation instead of just the junction angle // for small segments (< 1mm) with large junction angles (> 135°). #endif @@ -1226,7 +1230,7 @@ // Direction of endstops when homing; 1=MAX, -1=MIN // :[-1,1] #define X_HOME_DIR -1 -#define Y_HOME_DIR -1 +#define Y_HOME_DIR 1 #define Z_HOME_DIR -1 // @section machine @@ -1253,7 +1257,7 @@ */ // Min software endstops constrain movement within minimum coordinate bounds -#define MIN_SOFTWARE_ENDSTOPS +//#define MIN_SOFTWARE_ENDSTOPS #if ENABLED(MIN_SOFTWARE_ENDSTOPS) #define MIN_SOFTWARE_ENDSTOP_X #define MIN_SOFTWARE_ENDSTOP_Y @@ -1261,7 +1265,7 @@ #endif // Max software endstops constrain movement within maximum coordinate bounds -#define MAX_SOFTWARE_ENDSTOPS +//#define MAX_SOFTWARE_ENDSTOPS #if ENABLED(MAX_SOFTWARE_ENDSTOPS) #define MAX_SOFTWARE_ENDSTOP_X #define MAX_SOFTWARE_ENDSTOP_Y @@ -2682,16 +2686,16 @@ #endif // Support for Adafruit NeoPixel LED driver -//#define NEOPIXEL_LED +#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - #define NEOPIXEL_PIN 4 // LED driving pin + #define NEOPIXEL_PIN 20 // LED driving pin + #define NEOPIXEL_PIXELS 3 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE diff --git a/config/examples/Printrbot/Simple Metal RevD/Configuration.h b/config/examples/Printrbot/Simple Metal RevD/Configuration.h index 78c2dc9160..51f2f26ee5 100644 --- a/config/examples/Printrbot/Simple Metal RevD/Configuration.h +++ b/config/examples/Printrbot/Simple Metal RevD/Configuration.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Printrbot/Simple Metal RevD" + /** * Configuration.h * @@ -127,14 +129,14 @@ * * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ -#define BAUDRATE 250000 +#define BAUDRATE 115200 // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH // Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_RAMPS_14_EFB + #define MOTHERBOARD BOARD_PRINTRBOARD #endif // Name displayed in the LCD "Ready" message and Info menu @@ -424,7 +426,7 @@ #define TEMP_SENSOR_5 0 #define TEMP_SENSOR_6 0 #define TEMP_SENSOR_7 0 -#define TEMP_SENSOR_BED 0 +#define TEMP_SENSOR_BED 0 // Printrbot heated bed change to 1 to enable #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 #define TEMP_SENSOR_COOLER 0 @@ -655,7 +657,7 @@ #define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders #define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed -#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber +//#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber #define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling //=========================================================================== @@ -684,10 +686,10 @@ // Almost all printers will be using one per axis. Probes will use one or more of the // extra connectors. Leave undefined any used for non-endstop and non-probe purposes. #define USE_XMIN_PLUG -#define USE_YMIN_PLUG +//#define USE_YMIN_PLUG #define USE_ZMIN_PLUG //#define USE_XMAX_PLUG -//#define USE_YMAX_PLUG +#define USE_YMAX_PLUG //#define USE_ZMAX_PLUG // Enable pullup for all endstops to prevent a floating state @@ -806,14 +808,14 @@ * Override with M92 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 500 } +#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 2020, 94.5 } // if acme rod change Z to 400 /** * Default Max Feed Rate (mm/s) * Override with M203 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 } +#define DEFAULT_MAX_FEEDRATE { 150, 150, 7, 40 } //#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 #if ENABLED(LIMITED_MAX_FR_EDITING) @@ -826,7 +828,7 @@ * Override with M201 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 } +#define DEFAULT_MAX_ACCELERATION { 2000, 2000, 100, 10000 } //#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 #if ENABLED(LIMITED_MAX_ACCEL_EDITING) @@ -841,9 +843,9 @@ * M204 R Retract Acceleration * M204 T Travel Acceleration */ -#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves +#define DEFAULT_ACCELERATION 1500 // X, Y, Z and E acceleration for printing moves #define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves +#define DEFAULT_TRAVEL_ACCELERATION 1500 // X, Y, Z acceleration for travel (non printing) moves /** * Default Jerk limits (mm/s) @@ -946,7 +948,7 @@ * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. * (e.g., an inductive probe or a nozzle-based probe-switch.) */ -//#define FIX_MOUNTED_PROBE +#define FIX_MOUNTED_PROBE /** * Use the nozzle as the probe, as with a conductive @@ -1055,14 +1057,14 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +#define NOZZLE_TO_PROBE_OFFSET { 20, 0, 0 } // Most probes should stay away from the edges of the bed, but // with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed (mm/min) between probes -#define XY_PROBE_FEEDRATE (133*60) +#define XY_PROBE_FEEDRATE (116*60) // Feedrate (mm/min) for the first approach when double-probing (MULTIPLE_PROBING == 2) #define Z_PROBE_FEEDRATE_FAST (4*60) @@ -1106,7 +1108,7 @@ * A total of 2 does fast/slow probes with a weighted average. * A total of 3 or more adds more slow probes, taking the average. */ -//#define MULTIPLE_PROBING 2 +#define MULTIPLE_PROBING 2 //#define EXTRA_PROBING 1 /** @@ -1123,15 +1125,15 @@ * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. */ -#define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow -#define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points -#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes +#define Z_CLEARANCE_DEPLOY_PROBE 4 // Z Clearance for Deploy/Stow +#define Z_CLEARANCE_BETWEEN_PROBES 3 // Z Clearance between probe points +#define Z_CLEARANCE_MULTI_PROBE 3 // Z Clearance between multiple probes //#define Z_AFTER_PROBING 5 // Z position after probing is done #define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping // For M851 give a range for adjusting the Z probe offset -#define Z_PROBE_OFFSET_RANGE_MIN -20 +#define Z_PROBE_OFFSET_RANGE_MIN -2 #define Z_PROBE_OFFSET_RANGE_MAX 20 // Enable the M48 repeatability test to test probe accuracy @@ -1190,9 +1192,9 @@ // @section machine // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR false +#define INVERT_X_DIR true #define INVERT_Y_DIR true -#define INVERT_Z_DIR false +#define INVERT_Z_DIR true // @section extruder @@ -1218,7 +1220,7 @@ */ //#define Z_IDLE_HEIGHT Z_HOME_POS -//#define Z_HOMING_HEIGHT 4 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ... +#define Z_HOMING_HEIGHT 3 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ... // Be sure to have this much clearance over your Z_MAX_POS to prevent grinding. //#define Z_AFTER_HOMING 10 // (mm) Height to move to after homing Z @@ -1226,14 +1228,14 @@ // Direction of endstops when homing; 1=MAX, -1=MIN // :[-1,1] #define X_HOME_DIR -1 -#define Y_HOME_DIR -1 +#define Y_HOME_DIR 1 #define Z_HOME_DIR -1 // @section machine // The size of the printable area -#define X_BED_SIZE 200 -#define Y_BED_SIZE 200 +#define X_BED_SIZE 152 +#define Y_BED_SIZE 152 // Travel limits (mm) after homing, corresponding to endstop positions. #define X_MIN_POS 0 @@ -1241,7 +1243,7 @@ #define Z_MIN_POS 0 #define X_MAX_POS X_BED_SIZE #define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 200 +#define Z_MAX_POS 152 /** * Software Endstops @@ -1385,7 +1387,7 @@ * leveling in steps so you can manually adjust the Z height at each grid-point. * With an LCD controller the process is guided step-by-step. */ -//#define AUTO_BED_LEVELING_3POINT +#define AUTO_BED_LEVELING_3POINT //#define AUTO_BED_LEVELING_LINEAR //#define AUTO_BED_LEVELING_BILINEAR //#define AUTO_BED_LEVELING_UBL @@ -1587,7 +1589,7 @@ // - Move the Z probe (or nozzle) to a defined XY point before Z Homing. // - Prevent Z homing when the Z probe is outside bed area. // -//#define Z_SAFE_HOMING +#define Z_SAFE_HOMING #if ENABLED(Z_SAFE_HOMING) #define Z_SAFE_HOMING_X_POINT X_CENTER // X point for Z homing @@ -1672,7 +1674,7 @@ * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) */ -//#define EEPROM_SETTINGS // Persistent storage with M500 and M501 +#define EEPROM_SETTINGS // Persistent storage with M500 and M501 //#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. #define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load @@ -1928,7 +1930,7 @@ * * :[0:'Classic', 1:'Průša'] */ -#define LCD_INFO_SCREEN_STYLE 0 +//#define LCD_INFO_SCREEN_STYLE 0 /** * SD CARD @@ -1936,7 +1938,7 @@ * SD Card support is disabled by default. If your controller has an SD slot, * you must uncomment the following option or it won't work. */ -//#define SDSUPPORT +#define SDSUPPORT /** * SD CARD: ENABLE CRC @@ -2618,7 +2620,7 @@ // Use software PWM to drive the fan, as for the heaters. This uses a very low frequency // which is not as annoying as with the hardware PWM. On the other hand, if this frequency // is too low, you should also increment SOFT_PWM_SCALE. -//#define FAN_SOFT_PWM +#define FAN_SOFT_PWM // Incrementing this by 1 will double the software PWM frequency, // affecting heaters, and the fan if FAN_SOFT_PWM is enabled. diff --git a/config/examples/Prusa/MK3/Configuration.h b/config/examples/Prusa/MK3/Configuration.h index 78c2dc9160..1447b3fe76 100644 --- a/config/examples/Prusa/MK3/Configuration.h +++ b/config/examples/Prusa/MK3/Configuration.h @@ -1,6 +1,6 @@ /** * Marlin 3D Printer Firmware - * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * Copyright (c) 2021 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * * Based on Sprinter and grbl. * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Prusa/MK3" + /** * Configuration.h * @@ -69,8 +71,23 @@ // @section info // Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes. -//#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) +#define STRING_CONFIG_H_AUTHOR "(Prussia3D, Paul_GD MK3S)" // Who made the changes. +#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) + +// Disable this for FAN_PIN 8 and FAN1_PIN 6 +#define MK3_FAN_PINS + +// Is printer equipped with a 3.5:1 gearbox on the extruder? +//#define GEARBOX_BEAR + +// Printer needs lower baudrate? +//#define LOWBAUD + +// Tall Bear (320mm)? +//#define TALLBEAR + +// SuperPinda present? +//#define SUPERPINDA /** * *** VENDORS PLEASE READ *** @@ -127,18 +144,22 @@ * * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ -#define BAUDRATE 250000 +#if ENABLED(LOWBAUD) + #define BAUDRATE 115200 +#else + #define BAUDRATE 250000 +#endif // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH // Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_RAMPS_14_EFB + #define MOTHERBOARD BOARD_EINSY_RAMBO #endif // Name displayed in the LCD "Ready" message and Info menu -//#define CUSTOM_MACHINE_NAME "3D Printer" +#define CUSTOM_MACHINE_NAME "Prusa MK3S" // Printer's unique ID, used by some programs to differentiate between machines. // Choose your own or use a service like https://www.uuidgenerator.net/version4 @@ -424,8 +445,12 @@ #define TEMP_SENSOR_5 0 #define TEMP_SENSOR_6 0 #define TEMP_SENSOR_7 0 -#define TEMP_SENSOR_BED 0 -#define TEMP_SENSOR_PROBE 0 +#define TEMP_SENSOR_BED 1 +#if ENABLED(SUPERPINDA) + #define TEMP_SENSOR_PROBE 0 +#else + #define TEMP_SENSOR_PROBE 1 +#endif #define TEMP_SENSOR_CHAMBER 0 #define TEMP_SENSOR_COOLER 0 @@ -458,7 +483,7 @@ // Below this temperature the heater will be switched off // because it probably indicates a broken thermistor wire. -#define HEATER_0_MINTEMP 5 +#define HEATER_0_MINTEMP 10 #define HEATER_1_MINTEMP 5 #define HEATER_2_MINTEMP 5 #define HEATER_3_MINTEMP 5 @@ -466,13 +491,13 @@ #define HEATER_5_MINTEMP 5 #define HEATER_6_MINTEMP 5 #define HEATER_7_MINTEMP 5 -#define BED_MINTEMP 5 +#define BED_MINTEMP 10 #define CHAMBER_MINTEMP 5 // Above this temperature the heater will be switched off. // This can protect components from overheating, but NOT from shorts and failures. // (Use MINTEMP for thermistor short/failure protection.) -#define HEATER_0_MAXTEMP 275 +#define HEATER_0_MAXTEMP 305 #define HEATER_1_MAXTEMP 275 #define HEATER_2_MAXTEMP 275 #define HEATER_3_MAXTEMP 275 @@ -480,7 +505,7 @@ #define HEATER_5_MAXTEMP 275 #define HEATER_6_MAXTEMP 275 #define HEATER_7_MAXTEMP 275 -#define BED_MAXTEMP 150 +#define BED_MAXTEMP 125 #define CHAMBER_MAXTEMP 60 /** @@ -505,8 +530,8 @@ #define PID_K1 0.95 // Smoothing factor within any PID loop #if ENABLED(PIDTEMP) - //#define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) - //#define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) + #define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) + #define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) // Set/get with gcode: M301 E[extruder number, 0-2] @@ -517,9 +542,10 @@ #define DEFAULT_Ki_LIST { 1.08, 1.08 } #define DEFAULT_Kd_LIST { 114.00, 114.00 } #else - #define DEFAULT_Kp 22.20 - #define DEFAULT_Ki 1.08 - #define DEFAULT_Kd 114.00 + // Original Prusa i3 MK3/S + #define DEFAULT_Kp 16.13 + #define DEFAULT_Ki 1.1625 + #define DEFAULT_Kd 56.23 #endif #endif // PIDTEMP @@ -540,7 +566,7 @@ * heater. If your configuration is significantly different than this and you don't understand * the issues involved, don't use bed PID until someone else verifies that your hardware works. */ -//#define PIDTEMPBED +#define PIDTEMPBED //#define BED_LIMIT_SWITCHING @@ -558,9 +584,11 @@ // 120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) // from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) - #define DEFAULT_bedKp 10.00 - #define DEFAULT_bedKi .023 - #define DEFAULT_bedKd 305.4 + + // Original Prusa i3 MK3/S + #define DEFAULT_bedKp 126.13 + #define DEFAULT_bedKi 4.30 + #define DEFAULT_bedKd 924.76 // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. #endif // PIDTEMPBED @@ -627,7 +655,7 @@ * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** */ #define PREVENT_COLD_EXTRUSION -#define EXTRUDE_MINTEMP 170 +#define EXTRUDE_MINTEMP 175 /** * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. @@ -717,8 +745,8 @@ #endif // Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. +#define X_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Y_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. #define Z_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. #define X_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. #define Y_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. @@ -743,15 +771,15 @@ * TMC5130, TMC5130_STANDALONE, TMC5160, TMC5160_STANDALONE * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'L6474', 'POWERSTEP01', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2160', 'TMC2160_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC2209', 'TMC2209_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE', 'TMC5160', 'TMC5160_STANDALONE'] */ -#define X_DRIVER_TYPE A4988 -#define Y_DRIVER_TYPE A4988 -#define Z_DRIVER_TYPE A4988 +#define X_DRIVER_TYPE TMC2130 +#define Y_DRIVER_TYPE TMC2130 +#define Z_DRIVER_TYPE TMC2130 //#define X2_DRIVER_TYPE A4988 //#define Y2_DRIVER_TYPE A4988 //#define Z2_DRIVER_TYPE A4988 //#define Z3_DRIVER_TYPE A4988 //#define Z4_DRIVER_TYPE A4988 -#define E0_DRIVER_TYPE A4988 +#define E0_DRIVER_TYPE TMC2130 //#define E1_DRIVER_TYPE A4988 //#define E2_DRIVER_TYPE A4988 //#define E3_DRIVER_TYPE A4988 @@ -806,14 +834,18 @@ * Override with M92 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 500 } +#if ENABLED(GEARBOX_BEAR) + #define DEFAULT_AXIS_STEPS_PER_UNIT { 100, 100, 3200/8, 490 } +#else + #define DEFAULT_AXIS_STEPS_PER_UNIT { 100, 100, 3200/8, 280 } +#endif /** * Default Max Feed Rate (mm/s) * Override with M203 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 } +#define DEFAULT_MAX_FEEDRATE { 100, 100, 12, 120 } //#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 #if ENABLED(LIMITED_MAX_FR_EDITING) @@ -826,7 +858,7 @@ * Override with M201 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 } +#define DEFAULT_MAX_ACCELERATION { 960, 960, 200, 5000 } //#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 #if ENABLED(LIMITED_MAX_ACCEL_EDITING) @@ -841,9 +873,9 @@ * M204 R Retract Acceleration * M204 T Travel Acceleration */ -#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves +#define DEFAULT_ACCELERATION 1000 // X, Y, Z and E acceleration for printing moves +#define DEFAULT_RETRACT_ACCELERATION 1000 // E acceleration for retracts +#define DEFAULT_TRAVEL_ACCELERATION 1000 // X, Y, Z acceleration for travel (non printing) moves /** * Default Jerk limits (mm/s) @@ -853,11 +885,11 @@ * When changing speed and direction, if the difference is less than the * value set here, it may happen instantaneously. */ -//#define CLASSIC_JERK +#define CLASSIC_JERK #if ENABLED(CLASSIC_JERK) - #define DEFAULT_XJERK 10.0 - #define DEFAULT_YJERK 10.0 - #define DEFAULT_ZJERK 0.3 + #define DEFAULT_XJERK 6.0 + #define DEFAULT_YJERK 6.0 + #define DEFAULT_ZJERK 0.4 //#define TRAVEL_EXTRA_XYJERK 0.0 // Additional jerk allowance for all travel moves @@ -867,7 +899,7 @@ #endif #endif -#define DEFAULT_EJERK 5.0 // May be used by Linear Advance +#define DEFAULT_EJERK 4.5 // May be used by Linear Advance /** * Junction Deviation Factor @@ -877,7 +909,7 @@ * https://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html */ #if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.013 // (mm) Distance from real junction edge + #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge #define JD_HANDLE_SMALL_SEGMENTS // Use curvature estimation instead of just the junction angle // for small segments (< 1mm) with large junction angles (> 135°). #endif @@ -890,7 +922,7 @@ * * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained */ -//#define S_CURVE_ACCELERATION +#define S_CURVE_ACCELERATION //=========================================================================== //============================= Z Probe Options ============================= @@ -909,7 +941,7 @@ #define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN // Force the use of the probe for Z-axis homing -//#define USE_PROBE_FOR_Z_HOMING +#define USE_PROBE_FOR_Z_HOMING /** * Z_MIN_PROBE_PIN @@ -946,7 +978,7 @@ * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. * (e.g., an inductive probe or a nozzle-based probe-switch.) */ -//#define FIX_MOUNTED_PROBE +#define FIX_MOUNTED_PROBE /** * Use the nozzle as the probe, as with a conductive @@ -1055,14 +1087,14 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +#define NOZZLE_TO_PROBE_OFFSET { 23, 5, -0.5 } // Most probes should stay away from the edges of the bed, but // with NOZZLE_AS_PROBE this can be negative for a wider probing area. -#define PROBING_MARGIN 10 +#define PROBING_MARGIN 0 // X and Y axis travel speed (mm/min) between probes -#define XY_PROBE_FEEDRATE (133*60) +#define XY_PROBE_FEEDRATE (86*60) // Feedrate (mm/min) for the first approach when double-probing (MULTIPLE_PROBING == 2) #define Z_PROBE_FEEDRATE_FAST (4*60) @@ -1106,8 +1138,8 @@ * A total of 2 does fast/slow probes with a weighted average. * A total of 3 or more adds more slow probes, taking the average. */ -//#define MULTIPLE_PROBING 2 -//#define EXTRA_PROBING 1 +#define MULTIPLE_PROBING 2 +#define EXTRA_PROBING 1 /** * Z probes require clearance when deploying, stowing, and moving between @@ -1123,20 +1155,19 @@ * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. */ -#define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow -#define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points -#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes +#define Z_CLEARANCE_DEPLOY_PROBE 2 // Z Clearance for Deploy/Stow +#define Z_CLEARANCE_BETWEEN_PROBES 2 // Z Clearance between probe points +#define Z_CLEARANCE_MULTI_PROBE 1 // Z Clearance between multiple probes //#define Z_AFTER_PROBING 5 // Z position after probing is done -#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping +#define Z_PROBE_LOW_POINT -1 // Farthest distance below the trigger-point to go before stopping // For M851 give a range for adjusting the Z probe offset -#define Z_PROBE_OFFSET_RANGE_MIN -20 -#define Z_PROBE_OFFSET_RANGE_MAX 20 +#define Z_PROBE_OFFSET_RANGE_MIN -3 +#define Z_PROBE_OFFSET_RANGE_MAX 0 // Enable the M48 repeatability test to test probe accuracy -//#define Z_MIN_PROBE_REPEATABILITY_TEST - +#define Z_MIN_PROBE_REPEATABILITY_TEST // Before deploy/stow pause for user confirmation //#define PAUSE_BEFORE_DEPLOY_STOW #if ENABLED(PAUSE_BEFORE_DEPLOY_STOW) @@ -1150,7 +1181,7 @@ * These options are most useful for the BLTouch probe, but may also improve * readings with inductive probes and piezo sensors. */ -//#define PROBING_HEATERS_OFF // Turn heaters off when probing +#define PROBING_HEATERS_OFF // Turn heaters off when probing #if ENABLED(PROBING_HEATERS_OFF) //#define WAIT_FOR_BED_HEATER // Wait for bed to heat back up between probes (to improve accuracy) //#define WAIT_FOR_HOTEND // Wait for hotend to heat back up between probes (to improve accuracy & prevent cold extrude) @@ -1190,9 +1221,9 @@ // @section machine // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR false -#define INVERT_Y_DIR true -#define INVERT_Z_DIR false +#define INVERT_X_DIR true +#define INVERT_Y_DIR false +#define INVERT_Z_DIR true // @section extruder @@ -1209,7 +1240,7 @@ // @section homing //#define NO_MOTION_BEFORE_HOMING // Inhibit movement until all axes have been homed. Also enable HOME_AFTER_DEACTIVATE for extra safety. -//#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated. Also enable NO_MOTION_BEFORE_HOMING for extra safety. +#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated. Also enable NO_MOTION_BEFORE_HOMING for extra safety. /** * Set Z_IDLE_HEIGHT if the Z-Axis moves on its own when steppers are disabled. @@ -1232,16 +1263,21 @@ // @section machine // The size of the printable area -#define X_BED_SIZE 200 -#define Y_BED_SIZE 200 +#define X_BED_SIZE 250 +#define Y_BED_SIZE 210 // Travel limits (mm) after homing, corresponding to endstop positions. #define X_MIN_POS 0 -#define Y_MIN_POS 0 -#define Z_MIN_POS 0 -#define X_MAX_POS X_BED_SIZE -#define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 200 +#define Y_MIN_POS -4 +#define Z_MIN_POS 0.15 +#define X_MAX_POS 255 +#define Y_MAX_POS 212.5 + +#if ENABLED(TALLBEAR) + #define Z_MAX_POS 320 +#else + #define Z_MAX_POS 210 +#endif /** * Software Endstops @@ -1285,12 +1321,12 @@ * RAMPS-based boards use SERVO3_PIN for the first runout sensor. * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. */ -//#define FILAMENT_RUNOUT_SENSOR +#define FILAMENT_RUNOUT_SENSOR #if ENABLED(FILAMENT_RUNOUT_SENSOR) #define FIL_RUNOUT_ENABLED_DEFAULT true // Enable the sensor on startup. Override with M412 followed by M500. #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. - #define FIL_RUNOUT_STATE LOW // Pin state indicating that filament is NOT present. + #define FIL_RUNOUT_STATE HIGH // Pin state indicating that filament is NOT present. #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. //#define WATCH_ALL_RUNOUT_SENSORS // Execute runout script on any triggering sensor, not only for the active extruder. @@ -1387,7 +1423,7 @@ */ //#define AUTO_BED_LEVELING_3POINT //#define AUTO_BED_LEVELING_LINEAR -//#define AUTO_BED_LEVELING_BILINEAR +#define AUTO_BED_LEVELING_BILINEAR //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING @@ -1442,8 +1478,8 @@ #if ENABLED(G26_MESH_VALIDATION) #define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle. #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for G26. - #define MESH_TEST_HOTEND_TEMP 205 // (°C) Default nozzle temperature for G26. - #define MESH_TEST_BED_TEMP 60 // (°C) Default bed temperature for G26. + #define MESH_TEST_HOTEND_TEMP 215 // (°C) Default nozzle temperature for G26. + #define MESH_TEST_BED_TEMP 70 // (°C) Default bed temperature for G26. #define G26_XY_FEEDRATE 20 // (mm/s) Feedrate for G26 XY moves. #define G26_XY_FEEDRATE_TRAVEL 100 // (mm/s) Feedrate for G26 XY travel moves. #define G26_RETRACT_MULTIPLIER 1.0 // G26 Q (retraction) used by default between mesh test elements. @@ -1454,8 +1490,8 @@ #if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR) // Set the number of grid points per dimension. - #define GRID_MAX_POINTS_X 3 - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X + #define GRID_MAX_POINTS_X 4 + #define GRID_MAX_POINTS_Y 6 // Probe along the Y axis, advancing X after each column //#define PROBE_Y_FIRST @@ -1470,7 +1506,7 @@ // Experimental Subdivision of the grid by Catmull-Rom method. // Synthesizes intermediate points to produce a more detailed mesh. // - //#define ABL_BILINEAR_SUBDIVISION + #define ABL_BILINEAR_SUBDIVISION #if ENABLED(ABL_BILINEAR_SUBDIVISION) // Number of subdivisions between probe points #define BILINEAR_SUBDIVISIONS 3 @@ -1486,9 +1522,9 @@ //#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh - #define MESH_INSET 1 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X + #define MESH_INSET 0 // Set Mesh bounds as an inset region of the bed + #define GRID_MAX_POINTS_X 4 // Don't use more than 15 points per axis, implementation limited. + #define GRID_MAX_POINTS_Y 6 //#define UBL_HILBERT_CURVE // Use Hilbert distribution for less travel when probing multiple points @@ -1565,7 +1601,7 @@ * Commands to execute at the end of G29 probing. * Useful to retract or move the Z probe out of the way. */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" +#define Z_PROBE_END_SCRIPT "G1 X12 Y6 F7200\nG1 Z0 F8000" // @section homing @@ -1587,15 +1623,15 @@ // - Move the Z probe (or nozzle) to a defined XY point before Z Homing. // - Prevent Z homing when the Z probe is outside bed area. // -//#define Z_SAFE_HOMING +#define Z_SAFE_HOMING #if ENABLED(Z_SAFE_HOMING) - #define Z_SAFE_HOMING_X_POINT X_CENTER // X point for Z homing - #define Z_SAFE_HOMING_Y_POINT Y_CENTER // Y point for Z homing + #define Z_SAFE_HOMING_X_POINT 35 // X point for Z homing + #define Z_SAFE_HOMING_Y_POINT 11 // Y point for Z homing #endif // Homing speeds (mm/min) -#define HOMING_FEEDRATE_MM_M { (50*60), (50*60), (4*60) } +#define HOMING_FEEDRATE_MM_M { (50*60), (50*60), (13*60) } // Validate that endstops are triggered on homing moves #define VALIDATE_HOMING_ENDSTOPS @@ -1630,7 +1666,7 @@ * +-------------->X +-------------->X +-------------->Y * XY_SKEW_FACTOR XZ_SKEW_FACTOR YZ_SKEW_FACTOR */ -//#define SKEW_CORRECTION +#define SKEW_CORRECTION #if ENABLED(SKEW_CORRECTION) // Input all length measurements here: @@ -1642,7 +1678,7 @@ // to override the above measurements: #define XY_SKEW_FACTOR 0.0 - //#define SKEW_CORRECTION_FOR_Z + #define SKEW_CORRECTION_FOR_Z #if ENABLED(SKEW_CORRECTION_FOR_Z) #define XZ_DIAG_AC 282.8427124746 #define XZ_DIAG_BD 282.8427124746 @@ -1654,7 +1690,7 @@ #endif // Enable this option for M852 to set skew at runtime - //#define SKEW_CORRECTION_GCODE + #define SKEW_CORRECTION_GCODE #endif //============================================================================= @@ -1672,7 +1708,7 @@ * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) */ -//#define EEPROM_SETTINGS // Persistent storage with M500 and M501 +#define EEPROM_SETTINGS // Persistent storage with M500 and M501 //#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. #define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load @@ -1706,17 +1742,41 @@ // Preheat Constants - Up to 5 are supported without changes // #define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 180 -#define PREHEAT_1_TEMP_BED 70 +#define PREHEAT_1_TEMP_HOTEND 215 +#define PREHEAT_1_TEMP_BED 60 #define PREHEAT_1_TEMP_CHAMBER 35 #define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 -#define PREHEAT_2_LABEL "ABS" -#define PREHEAT_2_TEMP_HOTEND 240 -#define PREHEAT_2_TEMP_BED 110 +#define PREHEAT_2_LABEL "PETG" +#define PREHEAT_2_TEMP_HOTEND 230 +#define PREHEAT_2_TEMP_BED 85 #define PREHEAT_2_TEMP_CHAMBER 35 #define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 +#define PREHEAT_3_LABEL "ASA" +#define PREHEAT_3_TEMP_HOTEND 260 +#define PREHEAT_3_TEMP_BED 105 +#define PREHEAT_3_TEMP_CHAMBER 35 +#define PREHEAT_3_FAN_SPEED 0 + +#define PREHEAT_4_LABEL "TPU" +#define PREHEAT_4_TEMP_HOTEND 230 +#define PREHEAT_4_TEMP_BED 50 +#define PREHEAT_4_TEMP_CHAMBER 35 +#define PREHEAT_4_FAN_SPEED 0 + +#define PREHEAT_5_LABEL "GTP" // Extrudr GreenTEC Pro +#define PREHEAT_5_TEMP_HOTEND 225 +#define PREHEAT_5_TEMP_BED 50 +#define PREHEAT_5_TEMP_CHAMBER 35 +#define PREHEAT_5_FAN_SPEED 0 + +#define PREHEAT_6_LABEL "PC" +#define PREHEAT_6_TEMP_HOTEND 275 +#define PREHEAT_6_TEMP_BED 110 +#define PREHEAT_6_TEMP_CHAMBER 35 +#define PREHEAT_6_FAN_SPEED 0 + /** * Nozzle Park * @@ -1728,7 +1788,7 @@ * P1 Raise the nozzle always to Z-park height. * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. */ -//#define NOZZLE_PARK_FEATURE +#define NOZZLE_PARK_FEATURE #if ENABLED(NOZZLE_PARK_FEATURE) // Specify a park position as { X, Y, Z_raise } @@ -1845,7 +1905,7 @@ * * View the current statistics with M78. */ -//#define PRINTCOUNTER +#define PRINTCOUNTER #if ENABLED(PRINTCOUNTER) #define PRINTCOUNTER_SAVE_INTERVAL 60 // (minutes) EEPROM save interval during print #endif @@ -1928,7 +1988,7 @@ * * :[0:'Classic', 1:'Průša'] */ -#define LCD_INFO_SCREEN_STYLE 0 +#define LCD_INFO_SCREEN_STYLE 1 /** * SD CARD @@ -1936,14 +1996,14 @@ * SD Card support is disabled by default. If your controller has an SD slot, * you must uncomment the following option or it won't work. */ -//#define SDSUPPORT +#define SDSUPPORT /** * SD CARD: ENABLE CRC * * Use CRC checks and retries on the SD communication. */ -//#define SD_CHECK_AND_RETRY +#define SD_CHECK_AND_RETRY /** * LCD Menu Items @@ -1960,7 +2020,7 @@ // This option overrides the default number of encoder pulses needed to // produce one step. Should be increased for high-resolution encoders. // -//#define ENCODER_PULSES_PER_STEP 4 +#define ENCODER_PULSES_PER_STEP 4 // // Use this option to override the number of step signals required to @@ -1983,7 +2043,7 @@ // // Set this option if CLOCKWISE causes values to DECREASE // -//#define REVERSE_ENCODER_DIRECTION +#define REVERSE_ENCODER_DIRECTION // // This option reverses the encoder direction for navigating LCD menus. @@ -2006,7 +2066,7 @@ // // Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. // -//#define INDIVIDUAL_AXIS_HOMING_MENU +#define INDIVIDUAL_AXIS_HOMING_MENU // // SPEAKER/BUZZER @@ -2014,7 +2074,7 @@ // If you have a speaker that can produce tones, enable it here. // By default Marlin assumes you have a buzzer with a fixed frequency. // -//#define SPEAKER +#define SPEAKER // // The duration and frequency for the UI feedback sound. @@ -2037,7 +2097,7 @@ // // Note: Usually sold with a white PCB. // -//#define REPRAP_DISCOUNT_SMART_CONTROLLER +#define REPRAP_DISCOUNT_SMART_CONTROLLER // // GT2560 (YHCB2004) LCD Display diff --git a/config/examples/Prusa/MK3/Configuration_adv.h b/config/examples/Prusa/MK3/Configuration_adv.h index 5335fa012a..bc1004a0d3 100644 --- a/config/examples/Prusa/MK3/Configuration_adv.h +++ b/config/examples/Prusa/MK3/Configuration_adv.h @@ -1,6 +1,6 @@ /** * Marlin 3D Printer Firmware - * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * Copyright (c) 2021 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * * Based on Sprinter and grbl. * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Prusa/MK3" + /** * Configuration_adv.h * @@ -238,8 +240,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 45 // Seconds + #define THERMAL_PROTECTION_HYSTERESIS 10 // Degrees Celsius //#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops #if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP) @@ -266,13 +268,13 @@ * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 360 // Seconds + #define THERMAL_PROTECTION_BED_HYSTERESIS 5 // Degrees Celsius /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds + #define WATCH_BED_TEMP_PERIOD 180 // Seconds #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius #endif @@ -307,9 +309,9 @@ #if ENABLED(PIDTEMP) // Add an experimental additional term to the heater power, proportional to the extrusion speed. // A well-chosen Kc value should add just enough power to melt the increased material volume. - //#define PID_EXTRUSION_SCALING + #define PID_EXTRUSION_SCALING #if ENABLED(PID_EXTRUSION_SCALING) - #define DEFAULT_Kc (100) // heating power = Kc * e_speed + #define DEFAULT_Kc (1) // heating power = Kc * e_speed #define LPQ_MAX_LEN 50 #endif @@ -377,7 +379,7 @@ * Enable Autotemp Mode with M104/M109 F S B. * Disable by sending M104/M109 with no F parameter (or F0 with AUTOTEMP_PROPORTIONAL). */ -#define AUTOTEMP +//#define AUTOTEMP #if ENABLED(AUTOTEMP) #define AUTOTEMP_OLDWEIGHT 0.98 // Turn on AUTOTEMP on M104/M109 by default using proportions set here @@ -479,7 +481,7 @@ // When first starting the main fan, run it at full speed for the // given number of milliseconds. This gets the fan spinning reliably // before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) -//#define FAN_KICKSTART_TIME 100 +#define FAN_KICKSTART_TIME 800 // Some coolers may require a non-zero "off" state. //#define FAN_OFF_PWM 1 @@ -540,7 +542,7 @@ * Multiple extruders can be assigned to the same pin in which case * the fan will turn on when any selected extruder is above the threshold. */ -#define E0_AUTO_FAN_PIN -1 +#define E0_AUTO_FAN_PIN 8 #define E1_AUTO_FAN_PIN -1 #define E2_AUTO_FAN_PIN -1 #define E3_AUTO_FAN_PIN -1 @@ -737,9 +739,9 @@ //#define SENSORLESS_BACKOFF_MM { 2, 2 } // (mm) Backoff from endstops before sensorless homing #define HOMING_BUMP_MM { 5, 5, 2 } // (mm) Backoff from endstops after first bump -#define HOMING_BUMP_DIVISOR { 2, 2, 4 } // Re-Bump Speed Divisor (Divides the Homing Feedrate) +#define HOMING_BUMP_DIVISOR { 1, 1, 1 } // Re-Bump Speed Divisor (Divides the Homing Feedrate) -//#define HOMING_BACKOFF_POST_MM { 2, 2, 2 } // (mm) Backoff from endstops after homing +#define HOMING_BACKOFF_POST_MM { 12, 10, 0 } // (mm) Backoff from endstops after homing //#define QUICK_HOME // If G28 contains XY do a diagonal move first //#define HOME_Y_BEFORE_X // If G28 contains XY home Y before X @@ -925,7 +927,7 @@ * Set DISABLE_INACTIVE_? 'true' to shut down axis steppers after an idle period. * The Deactive Time can be overridden with M18 and M84. Set to 0 for No Timeout. */ -#define DEFAULT_STEPPER_DEACTIVE_TIME 120 +#define DEFAULT_STEPPER_DEACTIVE_TIME 60 #define DISABLE_INACTIVE_X true #define DISABLE_INACTIVE_Y true #define DISABLE_INACTIVE_Z true // Set 'false' if the nozzle could fall onto your printed part! @@ -1059,7 +1061,7 @@ * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the * lowest stepping frequencies. */ -//#define ADAPTIVE_STEP_SMOOTHING +#define ADAPTIVE_STEP_SMOOTHING /** * Custom Microstepping @@ -1175,7 +1177,7 @@ #endif // Include a page of printer information in the LCD Main Menu - //#define LCD_INFO_MENU + #define LCD_INFO_MENU #if ENABLED(LCD_INFO_MENU) //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages #endif @@ -1219,7 +1221,7 @@ #if HAS_DISPLAY // The timeout (in ms) to return to the status screen from sub-menus - //#define LCD_TIMEOUT_TO_STATUS 15000 + #define LCD_TIMEOUT_TO_STATUS 15000 #if ENABLED(SHOW_BOOTSCREEN) #define BOOTSCREEN_TIMEOUT 4000 // (ms) Total Duration to display the boot screen(s) @@ -1229,23 +1231,23 @@ #endif // Scroll a longer status message into view - //#define STATUS_MESSAGE_SCROLLING + #define STATUS_MESSAGE_SCROLLING // On the Info Screen, display XY with one decimal place when possible //#define LCD_DECIMAL_SMALL_XY // Add an 'M73' G-code to set the current percentage - //#define LCD_SET_PROGRESS_MANUALLY + #define LCD_SET_PROGRESS_MANUALLY // Show the E position (filament used) during printing //#define LCD_SHOW_E_TOTAL #endif #if EITHER(SDSUPPORT, LCD_SET_PROGRESS_MANUALLY) && ANY(HAS_MARLINUI_U8GLIB, HAS_MARLINUI_HD44780, IS_TFTGLCD_PANEL, EXTENSIBLE_UI) - //#define SHOW_REMAINING_TIME // Display estimated time to completion + #define SHOW_REMAINING_TIME // Display estimated time to completion #if ENABLED(SHOW_REMAINING_TIME) - //#define USE_M73_REMAINING_TIME // Use remaining time from M73 command instead of estimation - //#define ROTATE_PROGRESS_DISPLAY // Display (P)rogress, (E)lapsed, and (R)emaining time + #define USE_M73_REMAINING_TIME // Use remaining time from M73 command instead of estimation + #define ROTATE_PROGRESS_DISPLAY // Display (P)rogress, (E)lapsed, and (R)emaining time #endif #if EITHER(HAS_MARLINUI_U8GLIB, EXTENSIBLE_UI) @@ -1259,7 +1261,7 @@ #define PROGRESS_BAR_MSG_TIME 3000 // (ms) Amount of time to show the status message #define PROGRESS_MSG_EXPIRE 0 // (ms) Amount of time to retain the status message (0=forever) //#define PROGRESS_MSG_ONCE // Show the message for MSG_TIME then clear it - //#define LCD_PROGRESS_BAR_TEST // Add a menu item to test the progress bar + #define LCD_PROGRESS_BAR_TEST // Add a menu item to test the progress bar #endif #endif #endif @@ -1361,7 +1363,7 @@ * - SDSORT_CACHE_NAMES will retain the sorted file listing in RAM. (Expensive!) * - SDSORT_DYNAMIC_RAM only uses RAM when the SD menu is visible. (Use with caution!) */ - //#define SDCARD_SORT_ALPHA + #define SDCARD_SORT_ALPHA // SD Card Sorting options #if ENABLED(SDCARD_SORT_ALPHA) @@ -1381,10 +1383,10 @@ //#define UTF_FILENAME_SUPPORT // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT + #define LONG_FILENAME_HOST_SUPPORT // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES + #define SCROLL_LONG_FILENAMES // Leave the heaters on after Stop Print (not recommended!) //#define SD_ABORT_NO_COOLDOWN @@ -1620,31 +1622,6 @@ #endif #endif // HAS_DGUS_LCD -// -// Additional options for AnyCubic Chiron TFT displays -// -#if ENABLED(ANYCUBIC_LCD_CHIRON) - // By default the type of panel is automatically detected. - // Enable one of these options if you know the panel type. - //#define CHIRON_TFT_STANDARD - //#define CHIRON_TFT_NEW - - // Enable the longer Anycubic powerup startup tune - //#define AC_DEFAULT_STARTUP_TUNE - - /** - * Display Folders - * By default the file browser lists all G-code files (including those in subfolders) in a flat list. - * Enable this option to display a hierarchical file browser. - * - * NOTES: - * - Without this option it helps to enable SDCARD_SORT_ALPHA so files are sorted before/after folders. - * - When used with the "new" panel, folder names will also have '.gcode' appended to their names. - * This hack is currently required to force the panel to show folders. - */ - #define AC_SD_FOLDER_VIEW -#endif - // // Specify additional languages for the UI. Default specified by LCD_LANGUAGE. // @@ -1790,7 +1767,7 @@ * * Warning: Does not respect endstops! */ -//#define BABYSTEPPING +#define BABYSTEPPING #if ENABLED(BABYSTEPPING) //#define INTEGRATED_BABYSTEPPING // EXPERIMENTAL integration of babystepping into the Stepper ISR //#define BABYSTEP_WITHOUT_HOMING @@ -1801,19 +1778,19 @@ #define BABYSTEP_MULTIPLICATOR_Z 1 // (steps or mm) Steps or millimeter distance for each Z babystep #define BABYSTEP_MULTIPLICATOR_XY 1 // (steps or mm) Steps or millimeter distance for each XY babystep - //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. + #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 2000 // Maximum interval between clicks, in milliseconds. // Note: Extra time may be added to mitigate controller latency. - //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on doubleclick when printer is idle. + #define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on doubleclick when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) #define MOVE_Z_IDLE_MULTIPLICATOR 1 // Multiply 1mm by this factor for the move step size. #endif #endif - //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 + #define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 - //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping + #define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping #if ENABLED(BABYSTEP_ZPROBE_OFFSET) //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor @@ -1837,12 +1814,12 @@ * * See https://marlinfw.org/docs/features/lin_advance.html for full instructions. */ -//#define LIN_ADVANCE +#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) //#define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // If enabled, this will generate debug information output over USB. - //#define EXPERIMENTAL_SCURVE // Enable this option to permit S-Curve Acceleration + #define EXPERIMENTAL_SCURVE // Enable this option to permit S-Curve Acceleration #endif // @section leveling @@ -1880,18 +1857,18 @@ * the probe to be unable to reach any points. */ #if PROBE_SELECTED && !IS_KINEMATIC - //#define PROBING_MARGIN_LEFT PROBING_MARGIN - //#define PROBING_MARGIN_RIGHT PROBING_MARGIN - //#define PROBING_MARGIN_FRONT PROBING_MARGIN - //#define PROBING_MARGIN_BACK PROBING_MARGIN + #define PROBING_MARGIN_LEFT 24 + #define PROBING_MARGIN_RIGHT 22 + #define PROBING_MARGIN_FRONT 6 + #define PROBING_MARGIN_BACK 0 #endif #if EITHER(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL) // Override the mesh area if the automatic (max) area is too large - //#define MESH_MIN_X MESH_INSET - //#define MESH_MIN_Y MESH_INSET - //#define MESH_MAX_X X_BED_SIZE - (MESH_INSET) - //#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET) + #define MESH_MIN_X 24 + #define MESH_MIN_Y 6 + #define MESH_MAX_X 228 + #define MESH_MAX_Y 210 #endif #if BOTH(AUTO_BED_LEVELING_UBL, EEPROM_SETTINGS) @@ -2036,8 +2013,8 @@ * * Override the default value based on the driver type set in Configuration.h. */ -//#define MINIMUM_STEPPER_POST_DIR_DELAY 650 -//#define MINIMUM_STEPPER_PRE_DIR_DELAY 650 +#define MINIMUM_STEPPER_POST_DIR_DELAY 20 +#define MINIMUM_STEPPER_PRE_DIR_DELAY 20 /** * Minimum stepper driver pulse width (in µs) @@ -2050,7 +2027,7 @@ * * Override the default value based on the driver type set in Configuration.h. */ -//#define MINIMUM_STEPPER_PULSE 2 +#define MINIMUM_STEPPER_PULSE 0 /** * Maximum stepping rate (in Hz) the stepper driver allows @@ -2064,7 +2041,7 @@ * * Override the default value based on the driver type set in Configuration.h. */ -//#define MAXIMUM_STEPPER_RATE 250000 +#define MAXIMUM_STEPPER_RATE 5000000 // @section temperature @@ -2141,7 +2118,7 @@ * Currently handles M108, M112, M410, M876 * NOTE: Not yet implemented for all platforms. */ -//#define EMERGENCY_PARSER +#define EMERGENCY_PARSER /** * Realtime Reporting (requires EMERGENCY_PARSER) @@ -2170,7 +2147,7 @@ //#define NO_TIMEOUTS 1000 // Milliseconds // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. -//#define ADVANCED_OK +#define ADVANCED_OK // Printrun may have trouble receiving long strings all at once. // This option inserts short delays between lines of serial output. @@ -2311,23 +2288,23 @@ * * Enable PARK_HEAD_ON_PAUSE to add the G-code M125 Pause and Park. */ -//#define ADVANCED_PAUSE_FEATURE +#define ADVANCED_PAUSE_FEATURE #if ENABLED(ADVANCED_PAUSE_FEATURE) #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. // This short retract is done immediately, before parking the nozzle. - #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast. - #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload. + #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 60 // (mm/s) Unload filament feedrate. This can be pretty fast. + #define FILAMENT_CHANGE_UNLOAD_ACCEL 500 // (mm/s^2) Lower acceleration may allow a faster feedrate. + #define FILAMENT_CHANGE_UNLOAD_LENGTH 80 // (mm) The length of filament for a complete unload. // For Bowden, the full length of the tube and nozzle. // For direct drive, the full length of the nozzle. // Set to 0 for manual unloading. #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE 6 // (mm/s) Slow move when starting load. - #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 0 // (mm) Slow length, to allow time to insert material. + #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 3 // (mm) Slow length, to allow time to insert material. // 0 to disable start loading and skip to fast load only - #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast. + #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 18 // (mm/s) Load filament feedrate. This can be pretty fast. #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle. + #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 63 // (mm) Load length of filament, from extruder gear to nozzle. // For Bowden, the full length of the tube and nozzle. // For direct drive, the full length of the nozzle. //#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted. @@ -2340,19 +2317,19 @@ //#define ADVANCED_PAUSE_FANS_PAUSE // Turn off print-cooling fans while the machine is paused. // Filament Unload does a Retract, Delay, and Purge first: - #define FILAMENT_UNLOAD_PURGE_RETRACT 13 // (mm) Unload initial retract length. - #define FILAMENT_UNLOAD_PURGE_DELAY 5000 // (ms) Delay for the filament to cool after retract. - #define FILAMENT_UNLOAD_PURGE_LENGTH 8 // (mm) An unretract is done, then this length is purged. + #define FILAMENT_UNLOAD_PURGE_RETRACT 0 // (mm) Unload initial retract length. + #define FILAMENT_UNLOAD_PURGE_DELAY 0 // (ms) Delay for the filament to cool after retract. + #define FILAMENT_UNLOAD_PURGE_LENGTH 3 // (mm) An unretract is done, then this length is purged. #define FILAMENT_UNLOAD_PURGE_FEEDRATE 25 // (mm/s) feedrate to purge before unload #define PAUSE_PARK_NOZZLE_TIMEOUT 45 // (seconds) Time limit before the nozzle is turned off for safety. #define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed. #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change. - //#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. - //#define HOME_BEFORE_FILAMENT_CHANGE // If needed, home before parking for filament change + #define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. + #define HOME_BEFORE_FILAMENT_CHANGE // If needed, home before parking for filament change - //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. + #define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) #endif @@ -2484,7 +2461,7 @@ */ #if HAS_TRINAMIC_CONFIG - #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current + #define HOLD_MULTIPLIER 1.0 // Scales down the holding current from run current /** * Interpolate microsteps to 256 @@ -2493,10 +2470,10 @@ #define INTERPOLATE true #if AXIS_IS_TMC(X) - #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. - #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for sensorless homing + #define X_CURRENT 500 // (mA) RMS current. Multiply by 1.414 for peak current. + #define X_CURRENT_HOME 230 // (mA) RMS current for sensorless homing #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 + #define X_RSENSE 0.22 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis #endif @@ -2511,10 +2488,12 @@ #endif #if AXIS_IS_TMC(Y) - #define Y_CURRENT 800 - #define Y_CURRENT_HOME Y_CURRENT + //#define Y_CURRENT 348 + #define Y_CURRENT 500 // custom + //#define Y_CURRENT_HOME 182 + #define Y_CURRENT_HOME 260 // custom #define Y_MICROSTEPS 16 - #define Y_RSENSE 0.11 + #define Y_RSENSE 0.22 #define Y_CHAIN_POS -1 //#define Y_INTERPOLATE true #endif @@ -2529,10 +2508,10 @@ #endif #if AXIS_IS_TMC(Z) - #define Z_CURRENT 800 - #define Z_CURRENT_HOME Z_CURRENT + #define Z_CURRENT 530 + #define Z_CURRENT_HOME 348 #define Z_MICROSTEPS 16 - #define Z_RSENSE 0.11 + #define Z_RSENSE 0.22 #define Z_CHAIN_POS -1 //#define Z_INTERPOLATE true #endif @@ -2565,9 +2544,13 @@ #endif #if AXIS_IS_TMC(E0) - #define E0_CURRENT 800 - #define E0_MICROSTEPS 16 - #define E0_RSENSE 0.11 + #define E0_CURRENT 514 + #if ENABLED(GEARBOX_BEAR) + #define E0_MICROSTEPS 16 + #else + #define E0_MICROSTEPS 32 + #endif + #define E0_RSENSE 0.22 #define E0_CHAIN_POS -1 //#define E0_INTERPOLATE true #endif @@ -2702,7 +2685,7 @@ */ #define STEALTHCHOP_XY #define STEALTHCHOP_Z - #define STEALTHCHOP_E + //#define STEALTHCHOP_E /** * Optimize spreadCycle chopper parameters by using predefined parameter sets @@ -2719,7 +2702,7 @@ * Define your own with: * { , , hysteresis_start[1..8] } */ - #define CHOPPER_TIMING CHOPPER_DEFAULT_12V // All axes (override below) + #define CHOPPER_TIMING CHOPPER_PRUSAMK3_24V // All axes (override below) //#define CHOPPER_TIMING_X CHOPPER_TIMING // For X Axes (override below) //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X //#define CHOPPER_TIMING_Y CHOPPER_TIMING // For Y Axes (override below) @@ -2748,7 +2731,7 @@ * M912 - Clear stepper driver overtemperature pre-warn condition flag. * M122 - Report driver parameters (Requires TMC_DEBUG) */ - //#define MONITOR_DRIVER_STATUS + #define MONITOR_DRIVER_STATUS #if ENABLED(MONITOR_DRIVER_STATUS) #define CURRENT_STEP_DOWN 50 // [mA] @@ -2769,11 +2752,11 @@ #define X2_HYBRID_THRESHOLD 100 #define Y_HYBRID_THRESHOLD 100 #define Y2_HYBRID_THRESHOLD 100 - #define Z_HYBRID_THRESHOLD 3 - #define Z2_HYBRID_THRESHOLD 3 - #define Z3_HYBRID_THRESHOLD 3 - #define Z4_HYBRID_THRESHOLD 3 - #define E0_HYBRID_THRESHOLD 30 + #define Z_HYBRID_THRESHOLD 80 + #define Z2_HYBRID_THRESHOLD 80 + #define Z3_HYBRID_THRESHOLD 80 + #define Z4_HYBRID_THRESHOLD 80 + #define E0_HYBRID_THRESHOLD 0 #define E1_HYBRID_THRESHOLD 30 #define E2_HYBRID_THRESHOLD 30 #define E3_HYBRID_THRESHOLD 30 @@ -2807,20 +2790,20 @@ * * Comment *_STALL_SENSITIVITY to disable sensorless homing for that axis. */ - //#define SENSORLESS_HOMING // StallGuard capable drivers only + #define SENSORLESS_HOMING // StallGuard capable drivers only #if EITHER(SENSORLESS_HOMING, SENSORLESS_PROBING) // TMC2209: 0...255. TMC2130: -64...63 - #define X_STALL_SENSITIVITY 8 + #define X_STALL_SENSITIVITY 3 #define X2_STALL_SENSITIVITY X_STALL_SENSITIVITY - #define Y_STALL_SENSITIVITY 8 + #define Y_STALL_SENSITIVITY 3 #define Y2_STALL_SENSITIVITY Y_STALL_SENSITIVITY //#define Z_STALL_SENSITIVITY 8 //#define Z2_STALL_SENSITIVITY Z_STALL_SENSITIVITY //#define Z3_STALL_SENSITIVITY Z_STALL_SENSITIVITY //#define Z4_STALL_SENSITIVITY Z_STALL_SENSITIVITY //#define SPI_ENDSTOPS // TMC2130 only - //#define IMPROVE_HOMING_RELIABILITY + #define IMPROVE_HOMING_RELIABILITY #endif /** @@ -2833,7 +2816,7 @@ * * Values from 0..1023, -1 to disable homing phase for that axis. */ - //#define TMC_HOME_PHASE { 896, 896, 896 } + #define TMC_HOME_PHASE { 640, 640, -1 } /** * Beta feature! @@ -2845,7 +2828,7 @@ * Enable M122 debugging command for TMC stepper drivers. * M122 S0/1 will enable continuous reporting. */ - //#define TMC_DEBUG + #define TMC_DEBUG /** * You can set your own advanced settings by filling in predefined functions. @@ -3548,30 +3531,30 @@ // Custom Menu: Main Menu //#define CUSTOM_MENU_MAIN #if ENABLED(CUSTOM_MENU_MAIN) - //#define CUSTOM_MENU_MAIN_TITLE "Custom Commands" - #define CUSTOM_MENU_MAIN_SCRIPT_DONE "M117 User Script Done" + #define CUSTOM_MENU_MAIN_TITLE "Preheat" + #define CUSTOM_MENU_MAIN_SCRIPT_DONE "Preheating..." #define CUSTOM_MENU_MAIN_SCRIPT_AUDIBLE_FEEDBACK - //#define CUSTOM_MENU_MAIN_SCRIPT_RETURN // Return to status screen after a script - #define CUSTOM_MENU_MAIN_ONLY_IDLE // Only show custom menu when the machine is idle + #define CUSTOM_MENU_MAIN_SCRIPT_RETURN // Return to status screen after a script + #define CUSTOM_MENU_MAIN_ONLY_IDLE // Only show custom menu when the machine is idle - #define MAIN_MENU_ITEM_1_DESC "Home & UBL Info" - #define MAIN_MENU_ITEM_1_GCODE "G28\nG29 W" + #define MAIN_MENU_ITEM_1_DESC "PLA - 215/70" + #define MAIN_MENU_ITEM_1_GCODE "M140 S70\nM104 S215" //#define MAIN_MENU_ITEM_1_CONFIRM // Show a confirmation dialog before this action - #define MAIN_MENU_ITEM_2_DESC "Preheat for " PREHEAT_1_LABEL - #define MAIN_MENU_ITEM_2_GCODE "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND) + #define MAIN_MENU_ITEM_2_DESC "PET - 230/85" + #define MAIN_MENU_ITEM_2_GCODE "M140 S85\nM104 S240" //#define MAIN_MENU_ITEM_2_CONFIRM - //#define MAIN_MENU_ITEM_3_DESC "Preheat for " PREHEAT_2_LABEL - //#define MAIN_MENU_ITEM_3_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) + #define MAIN_MENU_ITEM_3_DESC "ASA - 260/105" + #define MAIN_MENU_ITEM_3_GCODE "M140 S105\nM104 S260" //#define MAIN_MENU_ITEM_3_CONFIRM - //#define MAIN_MENU_ITEM_4_DESC "Heat Bed/Home/Level" - //#define MAIN_MENU_ITEM_4_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29" + #define MAIN_MENU_ITEM_4_DESC "TPU - 230/50" + #define MAIN_MENU_ITEM_4_GCODE "M140 S50\nM104 S230" //#define MAIN_MENU_ITEM_4_CONFIRM - //#define MAIN_MENU_ITEM_5_DESC "Home & Info" - //#define MAIN_MENU_ITEM_5_GCODE "G28\nM503" + #define MAIN_MENU_ITEM_5_DESC "Cooldown" + #define MAIN_MENU_ITEM_5_GCODE "M140 S0\nM104 S0" //#define MAIN_MENU_ITEM_5_CONFIRM #endif @@ -3661,10 +3644,7 @@ * * Implement M486 to allow Marlin to skip objects */ -//#define CANCEL_OBJECTS -#if ENABLED(CANCEL_OBJECTS) - #define CANCEL_OBJECTS_REPORTING // Emit the current object as a status message -#endif +#define CANCEL_OBJECTS /** * I2C position encoders for closed loop control. @@ -3992,7 +3972,7 @@ // // M100 Free Memory Watcher to debug memory usage // -//#define M100_FREE_MEMORY_WATCHER +#define M100_FREE_MEMORY_WATCHER // // M42 - Set pin states diff --git a/config/examples/Prusa/MK3S-BigTreeTech-BTT002/Configuration.h b/config/examples/Prusa/MK3S-BigTreeTech-BTT002/Configuration.h index 78c2dc9160..f13ba51879 100644 --- a/config/examples/Prusa/MK3S-BigTreeTech-BTT002/Configuration.h +++ b/config/examples/Prusa/MK3S-BigTreeTech-BTT002/Configuration.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Prusa/MK3S-BigTreeTech-BTT002" + /** * Configuration.h * @@ -69,7 +71,7 @@ // @section info // Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes. +#define STRING_CONFIG_H_AUTHOR "(thisiskeithb & codiac2600: BTT002 MK3S/TMC2209s)" // Who made the changes. //#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) /** @@ -102,14 +104,14 @@ * * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] */ -#define SERIAL_PORT 0 +#define SERIAL_PORT 3 /** * Select a secondary serial port on the board to use for communication with the host. * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] */ -//#define SERIAL_PORT_2 -1 +#define SERIAL_PORT_2 -1 /** * Select a third serial port on the board to use for communication with the host. @@ -127,18 +129,18 @@ * * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ -#define BAUDRATE 250000 +#define BAUDRATE 115200 // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH // Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_RAMPS_14_EFB + #define MOTHERBOARD BOARD_BTT_BTT002_V1_0 #endif // Name displayed in the LCD "Ready" message and Info menu -//#define CUSTOM_MACHINE_NAME "3D Printer" +#define CUSTOM_MACHINE_NAME "MK3S" // Printer's unique ID, used by some programs to differentiate between machines. // Choose your own or use a service like https://www.uuidgenerator.net/version4 @@ -416,7 +418,7 @@ * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. */ -#define TEMP_SENSOR_0 1 +#define TEMP_SENSOR_0 5 #define TEMP_SENSOR_1 0 #define TEMP_SENSOR_2 0 #define TEMP_SENSOR_3 0 @@ -424,8 +426,8 @@ #define TEMP_SENSOR_5 0 #define TEMP_SENSOR_6 0 #define TEMP_SENSOR_7 0 -#define TEMP_SENSOR_BED 0 -#define TEMP_SENSOR_PROBE 0 +#define TEMP_SENSOR_BED 1 +#define TEMP_SENSOR_PROBE 1 #define TEMP_SENSOR_CHAMBER 0 #define TEMP_SENSOR_COOLER 0 @@ -445,12 +447,12 @@ #define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10 #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 -#define TEMP_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target +#define TEMP_WINDOW 3 // (°C) Temperature proximity for the "temperature reached" timer +#define TEMP_HYSTERESIS 8 // (°C) Temperature proximity considered "close enough" to the target #define TEMP_BED_RESIDENCY_TIME 10 // (seconds) Time to wait for bed to "settle" in M190 -#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target +#define TEMP_BED_WINDOW 3 // (°C) Temperature proximity for the "temperature reached" timer +#define TEMP_BED_HYSTERESIS 8 // (°C) Temperature proximity considered "close enough" to the target #define TEMP_CHAMBER_RESIDENCY_TIME 10 // (seconds) Time to wait for chamber to "settle" in M191 #define TEMP_CHAMBER_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer @@ -472,7 +474,7 @@ // Above this temperature the heater will be switched off. // This can protect components from overheating, but NOT from shorts and failures. // (Use MINTEMP for thermistor short/failure protection.) -#define HEATER_0_MAXTEMP 275 +#define HEATER_0_MAXTEMP 310 #define HEATER_1_MAXTEMP 275 #define HEATER_2_MAXTEMP 275 #define HEATER_3_MAXTEMP 275 @@ -480,7 +482,7 @@ #define HEATER_5_MAXTEMP 275 #define HEATER_6_MAXTEMP 275 #define HEATER_7_MAXTEMP 275 -#define BED_MAXTEMP 150 +#define BED_MAXTEMP 135 #define CHAMBER_MAXTEMP 60 /** @@ -505,21 +507,22 @@ #define PID_K1 0.95 // Smoothing factor within any PID loop #if ENABLED(PIDTEMP) - //#define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) - //#define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) + #define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) + #define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) // Set/get with gcode: M301 E[extruder number, 0-2] + // BTT002 MK3S #if ENABLED(PID_PARAMS_PER_HOTEND) // Specify between 1 and HOTENDS values per array. // If fewer than EXTRUDER values are provided, the last element will be repeated. - #define DEFAULT_Kp_LIST { 22.20, 22.20 } - #define DEFAULT_Ki_LIST { 1.08, 1.08 } - #define DEFAULT_Kd_LIST { 114.00, 114.00 } + #define DEFAULT_Kp_LIST { 16.1300, 16.1300 } + #define DEFAULT_Ki_LIST { 1.1625, 1.1625 } + #define DEFAULT_Kd_LIST { 56.2300, 56.2300 } #else - #define DEFAULT_Kp 22.20 - #define DEFAULT_Ki 1.08 - #define DEFAULT_Kd 114.00 + #define DEFAULT_Kp 16.1300 + #define DEFAULT_Ki 1.1625 + #define DEFAULT_Kd 56.2300 #endif #endif // PIDTEMP @@ -540,7 +543,7 @@ * heater. If your configuration is significantly different than this and you don't understand * the issues involved, don't use bed PID until someone else verifies that your hardware works. */ -//#define PIDTEMPBED +#define PIDTEMPBED //#define BED_LIMIT_SWITCHING @@ -556,11 +559,10 @@ //#define MIN_BED_POWER 0 //#define PID_BED_DEBUG // Sends debug data to the serial port. - // 120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - // from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) - #define DEFAULT_bedKp 10.00 - #define DEFAULT_bedKi .023 - #define DEFAULT_bedKd 305.4 + // BTT002 MK3S + #define DEFAULT_bedKp 126.13 + #define DEFAULT_bedKi 4.30 + #define DEFAULT_bedKd 924.76 // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. #endif // PIDTEMPBED @@ -627,7 +629,7 @@ * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** */ #define PREVENT_COLD_EXTRUSION -#define EXTRUDE_MINTEMP 170 +#define EXTRUDE_MINTEMP 175 /** * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. @@ -743,15 +745,15 @@ * TMC5130, TMC5130_STANDALONE, TMC5160, TMC5160_STANDALONE * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'L6474', 'POWERSTEP01', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2160', 'TMC2160_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC2209', 'TMC2209_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE', 'TMC5160', 'TMC5160_STANDALONE'] */ -#define X_DRIVER_TYPE A4988 -#define Y_DRIVER_TYPE A4988 -#define Z_DRIVER_TYPE A4988 +#define X_DRIVER_TYPE TMC2209 +#define Y_DRIVER_TYPE TMC2209 +#define Z_DRIVER_TYPE TMC2209 //#define X2_DRIVER_TYPE A4988 //#define Y2_DRIVER_TYPE A4988 //#define Z2_DRIVER_TYPE A4988 //#define Z3_DRIVER_TYPE A4988 //#define Z4_DRIVER_TYPE A4988 -#define E0_DRIVER_TYPE A4988 +#define E0_DRIVER_TYPE TMC2209 //#define E1_DRIVER_TYPE A4988 //#define E2_DRIVER_TYPE A4988 //#define E3_DRIVER_TYPE A4988 @@ -762,7 +764,7 @@ // Enable this feature if all enabled endstop pins are interrupt-capable. // This will remove the need to poll the interrupt pins, saving many CPU cycles. -//#define ENDSTOP_INTERRUPTS_FEATURE +#define ENDSTOP_INTERRUPTS_FEATURE /** * Endstop Noise Threshold @@ -806,14 +808,14 @@ * Override with M92 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 500 } +#define DEFAULT_AXIS_STEPS_PER_UNIT { 100, 100, 400, 280 } /** * Default Max Feed Rate (mm/s) * Override with M203 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 } +#define DEFAULT_MAX_FEEDRATE { 200, 200, 30, 80 } //#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 #if ENABLED(LIMITED_MAX_FR_EDITING) @@ -826,7 +828,7 @@ * Override with M201 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 } +#define DEFAULT_MAX_ACCELERATION { 1250, 1250, 400, 4000 } //#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 #if ENABLED(LIMITED_MAX_ACCEL_EDITING) @@ -841,9 +843,9 @@ * M204 R Retract Acceleration * M204 T Travel Acceleration */ -#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves +#define DEFAULT_ACCELERATION 1250 // X, Y, Z and E acceleration for printing moves +#define DEFAULT_RETRACT_ACCELERATION 1250 // E acceleration for retracts +#define DEFAULT_TRAVEL_ACCELERATION 1250 // X, Y, Z acceleration for travel (non printing) moves /** * Default Jerk limits (mm/s) @@ -867,7 +869,7 @@ #endif #endif -#define DEFAULT_EJERK 5.0 // May be used by Linear Advance +#define DEFAULT_EJERK 4 // May be used by Linear Advance /** * Junction Deviation Factor @@ -877,7 +879,7 @@ * https://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html */ #if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.013 // (mm) Distance from real junction edge + #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge #define JD_HANDLE_SMALL_SEGMENTS // Use curvature estimation instead of just the junction angle // for small segments (< 1mm) with large junction angles (> 135°). #endif @@ -890,7 +892,7 @@ * * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained */ -//#define S_CURVE_ACCELERATION +#define S_CURVE_ACCELERATION //=========================================================================== //============================= Z Probe Options ============================= @@ -946,7 +948,7 @@ * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. * (e.g., an inductive probe or a nozzle-based probe-switch.) */ -//#define FIX_MOUNTED_PROBE +#define FIX_MOUNTED_PROBE /** * Use the nozzle as the probe, as with a conductive @@ -1055,7 +1057,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +#define NOZZLE_TO_PROBE_OFFSET { 23, 5, 0 } // Most probes should stay away from the edges of the bed, but // with NOZZLE_AS_PROBE this can be negative for a wider probing area. @@ -1065,7 +1067,7 @@ #define XY_PROBE_FEEDRATE (133*60) // Feedrate (mm/min) for the first approach when double-probing (MULTIPLE_PROBING == 2) -#define Z_PROBE_FEEDRATE_FAST (4*60) +#define Z_PROBE_FEEDRATE_FAST (5*60)*4 // Feedrate (mm/min) for the "accurate" probe of each point #define Z_PROBE_FEEDRATE_SLOW (Z_PROBE_FEEDRATE_FAST / 2) @@ -1106,8 +1108,8 @@ * A total of 2 does fast/slow probes with a weighted average. * A total of 3 or more adds more slow probes, taking the average. */ -//#define MULTIPLE_PROBING 2 -//#define EXTRA_PROBING 1 +#define MULTIPLE_PROBING 2 +#define EXTRA_PROBING 1 /** * Z probes require clearance when deploying, stowing, and moving between @@ -1123,9 +1125,9 @@ * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. */ -#define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow -#define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points -#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes +#define Z_CLEARANCE_DEPLOY_PROBE 0 // Z Clearance for Deploy/Stow +#define Z_CLEARANCE_BETWEEN_PROBES 2 // Z Clearance between probe points +#define Z_CLEARANCE_MULTI_PROBE 1 // Z Clearance between multiple probes //#define Z_AFTER_PROBING 5 // Z position after probing is done #define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping @@ -1190,9 +1192,9 @@ // @section machine // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR false -#define INVERT_Y_DIR true -#define INVERT_Z_DIR false +#define INVERT_X_DIR true +#define INVERT_Y_DIR false +#define INVERT_Z_DIR true // @section extruder @@ -1232,16 +1234,16 @@ // @section machine // The size of the printable area -#define X_BED_SIZE 200 -#define Y_BED_SIZE 200 +#define X_BED_SIZE 255 +#define Y_BED_SIZE 212.5 // Travel limits (mm) after homing, corresponding to endstop positions. #define X_MIN_POS 0 -#define Y_MIN_POS 0 +#define Y_MIN_POS -4 #define Z_MIN_POS 0 #define X_MAX_POS X_BED_SIZE #define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 200 +#define Z_MAX_POS 210 /** * Software Endstops @@ -1269,7 +1271,7 @@ #endif #if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS) - //#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD + #define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD #endif /** @@ -1285,12 +1287,12 @@ * RAMPS-based boards use SERVO3_PIN for the first runout sensor. * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. */ -//#define FILAMENT_RUNOUT_SENSOR +#define FILAMENT_RUNOUT_SENSOR #if ENABLED(FILAMENT_RUNOUT_SENSOR) #define FIL_RUNOUT_ENABLED_DEFAULT true // Enable the sensor on startup. Override with M412 followed by M500. #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. - #define FIL_RUNOUT_STATE LOW // Pin state indicating that filament is NOT present. + #define FIL_RUNOUT_STATE HIGH // Pin state indicating that filament is NOT present. #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. //#define WATCH_ALL_RUNOUT_SENSORS // Execute runout script on any triggering sensor, not only for the active extruder. @@ -1337,7 +1339,7 @@ // After a runout is detected, continue printing this length of filament // before executing the runout script. Useful for a sensor at the end of // a feed tube. Requires 4 bytes SRAM per sensor, plus 4 bytes overhead. - //#define FILAMENT_RUNOUT_DISTANCE_MM 25 + #define FILAMENT_RUNOUT_DISTANCE_MM 2 #ifdef FILAMENT_RUNOUT_DISTANCE_MM // Enable this option to use an encoder disc that toggles the runout pin @@ -1387,7 +1389,7 @@ */ //#define AUTO_BED_LEVELING_3POINT //#define AUTO_BED_LEVELING_LINEAR -//#define AUTO_BED_LEVELING_BILINEAR +#define AUTO_BED_LEVELING_BILINEAR //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING @@ -1396,7 +1398,7 @@ * these options to restore the prior leveling state or to always enable * leveling immediately after G28. */ -//#define RESTORE_LEVELING_AFTER_G28 +#define RESTORE_LEVELING_AFTER_G28 //#define ENABLE_LEVELING_AFTER_G28 /** @@ -1454,7 +1456,7 @@ #if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR) // Set the number of grid points per dimension. - #define GRID_MAX_POINTS_X 3 + #define GRID_MAX_POINTS_X 7 #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X // Probe along the Y axis, advancing X after each column @@ -1464,13 +1466,13 @@ // Beyond the probed grid, continue the implied tilt? // Default is to maintain the height of the nearest edge. - //#define EXTRAPOLATE_BEYOND_GRID + #define EXTRAPOLATE_BEYOND_GRID // // Experimental Subdivision of the grid by Catmull-Rom method. // Synthesizes intermediate points to produce a more detailed mesh. // - //#define ABL_BILINEAR_SUBDIVISION + #define ABL_BILINEAR_SUBDIVISION #if ENABLED(ABL_BILINEAR_SUBDIVISION) // Number of subdivisions between probe points #define BILINEAR_SUBDIVISIONS 3 @@ -1518,12 +1520,12 @@ * Add a bed leveling sub-menu for ABL or MBL. * Include a guided procedure if manual probing is enabled. */ -//#define LCD_BED_LEVELING +#define LCD_BED_LEVELING #if ENABLED(LCD_BED_LEVELING) #define MESH_EDIT_Z_STEP 0.025 // (mm) Step size while manually probing Z axis. #define LCD_PROBE_Z_RANGE 4 // (mm) Z Range centered on Z_MIN_POS for LCD Z adjustment - //#define MESH_EDIT_MENU // Add a menu to edit mesh points + #define MESH_EDIT_MENU // Add a menu to edit mesh points #endif // Add a menu item to move between bed corners for manual bed adjustment @@ -1574,9 +1576,9 @@ // Manually set the home position. Leave these undefined for automatic settings. // For DELTA this is the top-center of the Cartesian print volume. -//#define MANUAL_X_HOME_POS 0 -//#define MANUAL_Y_HOME_POS 0 -//#define MANUAL_Z_HOME_POS 0 +#define MANUAL_X_HOME_POS 0 +#define MANUAL_Y_HOME_POS -2.2 +#define MANUAL_Z_HOME_POS 0.2 // Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area. // @@ -1587,7 +1589,7 @@ // - Move the Z probe (or nozzle) to a defined XY point before Z Homing. // - Prevent Z homing when the Z probe is outside bed area. // -//#define Z_SAFE_HOMING +#define Z_SAFE_HOMING #if ENABLED(Z_SAFE_HOMING) #define Z_SAFE_HOMING_X_POINT X_CENTER // X point for Z homing @@ -1595,7 +1597,7 @@ #endif // Homing speeds (mm/min) -#define HOMING_FEEDRATE_MM_M { (50*60), (50*60), (4*60) } +#define HOMING_FEEDRATE_MM_M { (50*60), (50*60), (5*60) } // Validate that endstops are triggered on homing moves #define VALIDATE_HOMING_ENDSTOPS @@ -1672,12 +1674,12 @@ * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) */ -//#define EEPROM_SETTINGS // Persistent storage with M500 and M501 +#define EEPROM_SETTINGS // Persistent storage with M500 and M501 //#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. #define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load #if ENABLED(EEPROM_SETTINGS) - //#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. + #define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. #endif // @@ -1706,16 +1708,16 @@ // Preheat Constants - Up to 5 are supported without changes // #define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 180 -#define PREHEAT_1_TEMP_BED 70 +#define PREHEAT_1_TEMP_HOTEND 200 +#define PREHEAT_1_TEMP_BED 60 #define PREHEAT_1_TEMP_CHAMBER 35 -#define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 +#define PREHEAT_1_FAN_SPEED 255 // Value from 0 to 255 -#define PREHEAT_2_LABEL "ABS" +#define PREHEAT_2_LABEL "PETG" #define PREHEAT_2_TEMP_HOTEND 240 -#define PREHEAT_2_TEMP_BED 110 +#define PREHEAT_2_TEMP_BED 80 #define PREHEAT_2_TEMP_CHAMBER 35 -#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 +#define PREHEAT_2_FAN_SPEED 255 // Value from 0 to 255 /** * Nozzle Park @@ -1728,11 +1730,11 @@ * P1 Raise the nozzle always to Z-park height. * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. */ -//#define NOZZLE_PARK_FEATURE +#define NOZZLE_PARK_FEATURE #if ENABLED(NOZZLE_PARK_FEATURE) // Specify a park position as { X, Y, Z_raise } - #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 } + #define NOZZLE_PARK_POINT { (X_MAX_POS - 10), (Y_MIN_POS + 10), 20 } //#define NOZZLE_PARK_X_ONLY // X move only is required to park //#define NOZZLE_PARK_Y_ONLY // Y move only is required to park #define NOZZLE_PARK_Z_RAISE_MIN 2 // (mm) Always raise Z by at least this distance @@ -1928,7 +1930,7 @@ * * :[0:'Classic', 1:'Průša'] */ -#define LCD_INFO_SCREEN_STYLE 0 +#define LCD_INFO_SCREEN_STYLE 1 /** * SD CARD @@ -1936,7 +1938,7 @@ * SD Card support is disabled by default. If your controller has an SD slot, * you must uncomment the following option or it won't work. */ -//#define SDSUPPORT +#define SDSUPPORT /** * SD CARD: ENABLE CRC @@ -1960,13 +1962,13 @@ // This option overrides the default number of encoder pulses needed to // produce one step. Should be increased for high-resolution encoders. // -//#define ENCODER_PULSES_PER_STEP 4 +#define ENCODER_PULSES_PER_STEP 4 // // Use this option to override the number of step signals required to // move between next/prev menu items. // -//#define ENCODER_STEPS_PER_MENU_ITEM 1 +#define ENCODER_STEPS_PER_MENU_ITEM 1 /** * Encoder Direction Options @@ -2006,7 +2008,7 @@ // // Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. // -//#define INDIVIDUAL_AXIS_HOMING_MENU +#define INDIVIDUAL_AXIS_HOMING_MENU // // SPEAKER/BUZZER @@ -2014,7 +2016,7 @@ // If you have a speaker that can produce tones, enable it here. // By default Marlin assumes you have a buzzer with a fixed frequency. // -//#define SPEAKER +#define SPEAKER // // The duration and frequency for the UI feedback sound. @@ -2037,7 +2039,7 @@ // // Note: Usually sold with a white PCB. // -//#define REPRAP_DISCOUNT_SMART_CONTROLLER +#define REPRAP_DISCOUNT_SMART_CONTROLLER // // GT2560 (YHCB2004) LCD Display @@ -2618,7 +2620,7 @@ // Use software PWM to drive the fan, as for the heaters. This uses a very low frequency // which is not as annoying as with the hardware PWM. On the other hand, if this frequency // is too low, you should also increment SOFT_PWM_SCALE. -//#define FAN_SOFT_PWM +#define FAN_SOFT_PWM // Incrementing this by 1 will double the software PWM frequency, // affecting heaters, and the fan if FAN_SOFT_PWM is enabled. diff --git a/config/examples/Prusa/MK3S-BigTreeTech-BTT002/Configuration_adv.h b/config/examples/Prusa/MK3S-BigTreeTech-BTT002/Configuration_adv.h index 5335fa012a..cfd7dafacf 100644 --- a/config/examples/Prusa/MK3S-BigTreeTech-BTT002/Configuration_adv.h +++ b/config/examples/Prusa/MK3S-BigTreeTech-BTT002/Configuration_adv.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Prusa/MK3S-BigTreeTech-BTT002" + /** * Configuration_adv.h * @@ -239,11 +241,11 @@ */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_HYSTERESIS 8 // Degrees Celsius - //#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops + #define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops #if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP) - //#define NO_FAN_SLOWING_IN_PID_TUNING // Don't slow fan speed during M303 + #define NO_FAN_SLOWING_IN_PID_TUNING // Don't slow fan speed during M303 #endif /** @@ -267,7 +269,7 @@ */ #if ENABLED(THERMAL_PROTECTION_BED) #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_HYSTERESIS 8 // Degrees Celsius /** * As described above, except for the bed (M140/M190/M303). @@ -281,13 +283,13 @@ */ #if ENABLED(THERMAL_PROTECTION_CHAMBER) #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 8 // Degrees Celsius /** * Heated chamber watch settings (M141/M191). */ #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_CHAMBER_TEMP_INCREASE 8 // Degrees Celsius #endif /** @@ -479,7 +481,7 @@ // When first starting the main fan, run it at full speed for the // given number of milliseconds. This gets the fan spinning reliably // before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) -//#define FAN_KICKSTART_TIME 100 +#define FAN_KICKSTART_TIME 100 // Some coolers may require a non-zero "off" state. //#define FAN_OFF_PWM 1 @@ -496,7 +498,7 @@ * * Define one or both of these to override the default 0-255 range. */ -//#define FAN_MIN_PWM 50 +#define FAN_MIN_PWM 80 //#define FAN_MAX_PWM 128 /** @@ -540,7 +542,7 @@ * Multiple extruders can be assigned to the same pin in which case * the fan will turn on when any selected extruder is above the threshold. */ -#define E0_AUTO_FAN_PIN -1 +#define E0_AUTO_FAN_PIN FAN1_PIN // PB9 #define E1_AUTO_FAN_PIN -1 #define E2_AUTO_FAN_PIN -1 #define E3_AUTO_FAN_PIN -1 @@ -736,10 +738,10 @@ //#define SENSORLESS_BACKOFF_MM { 2, 2 } // (mm) Backoff from endstops before sensorless homing -#define HOMING_BUMP_MM { 5, 5, 2 } // (mm) Backoff from endstops after first bump +#define HOMING_BUMP_MM { 0, 0, 2 } // (mm) Backoff from endstops after first bump #define HOMING_BUMP_DIVISOR { 2, 2, 4 } // Re-Bump Speed Divisor (Divides the Homing Feedrate) -//#define HOMING_BACKOFF_POST_MM { 2, 2, 2 } // (mm) Backoff from endstops after homing +#define HOMING_BACKOFF_POST_MM { 2, 2, 2 } // (mm) Backoff from endstops after homing //#define QUICK_HOME // If G28 contains XY do a diagonal move first //#define HOME_Y_BEFORE_X // If G28 contains XY home Y before X @@ -928,7 +930,7 @@ #define DEFAULT_STEPPER_DEACTIVE_TIME 120 #define DISABLE_INACTIVE_X true #define DISABLE_INACTIVE_Y true -#define DISABLE_INACTIVE_Z true // Set 'false' if the nozzle could fall onto your printed part! +#define DISABLE_INACTIVE_Z false // Set 'false' if the nozzle could fall onto your printed part! #define DISABLE_INACTIVE_E true // Default Minimum Feedrates for printing and travel moves @@ -1059,7 +1061,7 @@ * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the * lowest stepping frequencies. */ -//#define ADAPTIVE_STEP_SMOOTHING +#define ADAPTIVE_STEP_SMOOTHING /** * Custom Microstepping @@ -1160,7 +1162,7 @@ // Add Probe Z Offset calibration to the Z Probe Offsets menu #if HAS_BED_PROBE - //#define PROBE_OFFSET_WIZARD + #define PROBE_OFFSET_WIZARD #if ENABLED(PROBE_OFFSET_WIZARD) // // Enable to init the Probe Z-Offset when starting the Wizard. @@ -1175,7 +1177,7 @@ #endif // Include a page of printer information in the LCD Main Menu - //#define LCD_INFO_MENU + #define LCD_INFO_MENU #if ENABLED(LCD_INFO_MENU) //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages #endif @@ -1219,7 +1221,7 @@ #if HAS_DISPLAY // The timeout (in ms) to return to the status screen from sub-menus - //#define LCD_TIMEOUT_TO_STATUS 15000 + #define LCD_TIMEOUT_TO_STATUS 15000 #if ENABLED(SHOW_BOOTSCREEN) #define BOOTSCREEN_TIMEOUT 4000 // (ms) Total Duration to display the boot screen(s) @@ -1229,7 +1231,7 @@ #endif // Scroll a longer status message into view - //#define STATUS_MESSAGE_SCROLLING + #define STATUS_MESSAGE_SCROLLING // On the Info Screen, display XY with one decimal place when possible //#define LCD_DECIMAL_SMALL_XY @@ -1278,7 +1280,7 @@ // The standard SD detect circuit reads LOW when media is inserted and HIGH when empty. // Enable this option and set to HIGH if your SD cards are incorrectly detected. - //#define SD_DETECT_STATE HIGH + #define SD_DETECT_STATE HIGH //#define SD_IGNORE_AT_STARTUP // Don't mount the SD card when starting up //#define SDCARD_READONLY // Read-only SD card (to save over 2K of flash) @@ -1301,7 +1303,7 @@ //#define BROWSE_MEDIA_ON_INSERT // Open the file browser when media is inserted - #define EVENT_GCODE_SD_ABORT "G28XY" // G-code to run on SD Abort Print (e.g., "G28XY" or "G27") + #define EVENT_GCODE_SD_ABORT "G28XYE" // G-code to run on SD Abort Print (e.g., "G28XY" or "G27") #if ENABLED(PRINTER_EVENT_LEDS) #define PE_LEDS_COMPLETED_TIME (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination @@ -1315,16 +1317,16 @@ * an option on the LCD screen to continue the print from the last-known * point in the file. */ - //#define POWER_LOSS_RECOVERY + #define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) //#define BACKUP_POWER_SUPPLY // Backup power / UPS to move the steppers on power loss //#define POWER_LOSS_ZRAISE 2 // (mm) Z axis raise on resume (on power loss with UPS) //#define POWER_LOSS_PIN 44 // Pin to detect power loss. Set to -1 to disable default pin on boards without module. - //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss + #define POWER_LOSS_STATE LOW // State of pin indicating power loss //#define POWER_LOSS_PULLUP // Set pullup / pulldown as appropriate for your sensor //#define POWER_LOSS_PULLDOWN - //#define POWER_LOSS_PURGE_LEN 20 // (mm) Length of filament to purge on resume + #define POWER_LOSS_PURGE_LEN 20 // (mm) Length of filament to purge on resume //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power. // Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card, @@ -1361,16 +1363,16 @@ * - SDSORT_CACHE_NAMES will retain the sorted file listing in RAM. (Expensive!) * - SDSORT_DYNAMIC_RAM only uses RAM when the SD menu is visible. (Use with caution!) */ - //#define SDCARD_SORT_ALPHA + #define SDCARD_SORT_ALPHA // SD Card Sorting options #if ENABLED(SDCARD_SORT_ALPHA) #define SDSORT_LIMIT 40 // Maximum number of sorted items (10-256). Costs 27 bytes each. #define FOLDER_SORTING -1 // -1=above 0=none 1=below #define SDSORT_GCODE false // Allow turning sorting on/off with LCD and M34 G-code. - #define SDSORT_USES_RAM false // Pre-allocate a static array for faster pre-sorting. + #define SDSORT_USES_RAM true // Pre-allocate a static array for faster pre-sorting. #define SDSORT_USES_STACK false // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.) - #define SDSORT_CACHE_NAMES false // Keep sorted items in RAM longer for speedy performance. Most expensive option. + #define SDSORT_CACHE_NAMES true // Keep sorted items in RAM longer for speedy performance. Most expensive option. #define SDSORT_DYNAMIC_RAM false // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use! #define SDSORT_CACHE_VFATS 2 // Maximum number of 13-byte VFAT entries to use for sorting. // Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM. @@ -1381,10 +1383,10 @@ //#define UTF_FILENAME_SUPPORT // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT + #define LONG_FILENAME_HOST_SUPPORT // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES + #define SCROLL_LONG_FILENAMES // Leave the heaters on after Stop Print (not recommended!) //#define SD_ABORT_NO_COOLDOWN @@ -1476,7 +1478,7 @@ * * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] */ - //#define SDCARD_CONNECTION LCD + #define SDCARD_CONNECTION LCD // Enable if SD detect is rendered useless (e.g., by using an SD extender) //#define NO_SD_DETECT @@ -1790,7 +1792,7 @@ * * Warning: Does not respect endstops! */ -//#define BABYSTEPPING +#define BABYSTEPPING #if ENABLED(BABYSTEPPING) //#define INTEGRATED_BABYSTEPPING // EXPERIMENTAL integration of babystepping into the Stepper ISR //#define BABYSTEP_WITHOUT_HOMING @@ -1801,11 +1803,11 @@ #define BABYSTEP_MULTIPLICATOR_Z 1 // (steps or mm) Steps or millimeter distance for each Z babystep #define BABYSTEP_MULTIPLICATOR_XY 1 // (steps or mm) Steps or millimeter distance for each XY babystep - //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. + #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 800 // Maximum interval between clicks, in milliseconds. // Note: Extra time may be added to mitigate controller latency. - //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on doubleclick when printer is idle. + #define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on doubleclick when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) #define MOVE_Z_IDLE_MULTIPLICATOR 1 // Multiply 1mm by this factor for the move step size. #endif @@ -1813,7 +1815,7 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 - //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping + #define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping #if ENABLED(BABYSTEP_ZPROBE_OFFSET) //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor @@ -1837,12 +1839,12 @@ * * See https://marlinfw.org/docs/features/lin_advance.html for full instructions. */ -//#define LIN_ADVANCE +#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) //#define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants - #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed + #define LIN_ADVANCE_K 0.0 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // If enabled, this will generate debug information output over USB. - //#define EXPERIMENTAL_SCURVE // Enable this option to permit S-Curve Acceleration + #define EXPERIMENTAL_SCURVE // Enable this option to permit S-Curve Acceleration #endif // @section leveling @@ -1930,10 +1932,10 @@ // Note: this values cannot be calibrated and have to be set manually #if ENABLED(PROBE_TEMP_COMPENSATION) // Park position to wait for probe cooldown - #define PTC_PARK_POS { 0, 0, 100 } + #define PTC_PARK_POS { 245, 6, 105 } // right-front // Probe position to probe and wait for probe to reach target temperature - #define PTC_PROBE_POS { 90, 100 } + #define PTC_PROBE_POS { 127.5, 106.3 } // middle // Enable additional compensation using hotend temperature // Note: this values cannot be calibrated automatically but have to be set manually @@ -2082,7 +2084,7 @@ #if BOTH(SDSUPPORT, DIRECT_STEPPING) #define BLOCK_BUFFER_SIZE 8 #elif ENABLED(SDSUPPORT) - #define BLOCK_BUFFER_SIZE 16 + #define BLOCK_BUFFER_SIZE 32 #else #define BLOCK_BUFFER_SIZE 16 #endif @@ -2091,7 +2093,7 @@ // The ASCII buffer for serial input #define MAX_CMD_SIZE 96 -#define BUFSIZE 4 +#define BUFSIZE 32 // Transmission to Host Buffer Size // To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0. @@ -2100,7 +2102,7 @@ // For debug-echo: 128 bytes for the optimal speed. // Other output doesn't need to be that speedy. // :[0, 2, 4, 8, 16, 32, 64, 128, 256] -#define TX_BUFFER_SIZE 0 +#define TX_BUFFER_SIZE 32 // Host Receive Buffer Size // Without XON/XOFF flow control (see SERIAL_XON_XOFF below) 32 bytes should be enough. @@ -2141,7 +2143,7 @@ * Currently handles M108, M112, M410, M876 * NOTE: Not yet implemented for all platforms. */ -//#define EMERGENCY_PARSER +#define EMERGENCY_PARSER /** * Realtime Reporting (requires EMERGENCY_PARSER) @@ -2311,28 +2313,28 @@ * * Enable PARK_HEAD_ON_PAUSE to add the G-code M125 Pause and Park. */ -//#define ADVANCED_PAUSE_FEATURE +#define ADVANCED_PAUSE_FEATURE #if ENABLED(ADVANCED_PAUSE_FEATURE) #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. // This short retract is done immediately, before parking the nozzle. - #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast. + #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 20 // (mm/s) Unload filament feedrate. This can be pretty fast. #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload. + #define FILAMENT_CHANGE_UNLOAD_LENGTH 120 // (mm) The length of filament for a complete unload. // For Bowden, the full length of the tube and nozzle. // For direct drive, the full length of the nozzle. // Set to 0 for manual unloading. - #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE 6 // (mm/s) Slow move when starting load. - #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 0 // (mm) Slow length, to allow time to insert material. + #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE 2 // (mm/s) Slow move when starting load. + #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 40 // (mm) Slow length, to allow time to insert material. // 0 to disable start loading and skip to fast load only #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast. #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle. + #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 60 // (mm) Load length of filament, from extruder gear to nozzle. // For Bowden, the full length of the tube and nozzle. // For direct drive, the full length of the nozzle. //#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted. #define ADVANCED_PAUSE_PURGE_FEEDRATE 3 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate. - #define ADVANCED_PAUSE_PURGE_LENGTH 50 // (mm) Length to extrude after loading. + #define ADVANCED_PAUSE_PURGE_LENGTH 60 // (mm) Length to extrude after loading. // Set to 0 for manual extrusion. // Filament can be extruded repeatedly from the Filament Change menu // until extrusion is consistent, and to purge old filament. @@ -2340,7 +2342,7 @@ //#define ADVANCED_PAUSE_FANS_PAUSE // Turn off print-cooling fans while the machine is paused. // Filament Unload does a Retract, Delay, and Purge first: - #define FILAMENT_UNLOAD_PURGE_RETRACT 13 // (mm) Unload initial retract length. + #define FILAMENT_UNLOAD_PURGE_RETRACT 2 // (mm) Unload initial retract length. #define FILAMENT_UNLOAD_PURGE_DELAY 5000 // (ms) Delay for the filament to cool after retract. #define FILAMENT_UNLOAD_PURGE_LENGTH 8 // (mm) An unretract is done, then this length is purged. #define FILAMENT_UNLOAD_PURGE_FEEDRATE 25 // (mm/s) feedrate to purge before unload @@ -2349,10 +2351,10 @@ #define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed. #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change. - //#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. - //#define HOME_BEFORE_FILAMENT_CHANGE // If needed, home before parking for filament change + #define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. + #define HOME_BEFORE_FILAMENT_CHANGE // If needed, home before parking for filament change - //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. + #define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) #endif @@ -2493,8 +2495,8 @@ #define INTERPOLATE true #if AXIS_IS_TMC(X) - #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. - #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for sensorless homing + #define X_CURRENT 500 // (mA) RMS current. Multiply by 1.414 for peak current. + #define X_CURRENT_HOME ((X_CURRENT) / 2) // (mA) RMS current for sensorless homing #define X_MICROSTEPS 16 // 0..256 #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... @@ -2511,8 +2513,8 @@ #endif #if AXIS_IS_TMC(Y) - #define Y_CURRENT 800 - #define Y_CURRENT_HOME Y_CURRENT + #define Y_CURRENT 600 + #define Y_CURRENT_HOME ((Y_CURRENT) / 2) #define Y_MICROSTEPS 16 #define Y_RSENSE 0.11 #define Y_CHAIN_POS -1 @@ -2529,7 +2531,7 @@ #endif #if AXIS_IS_TMC(Z) - #define Z_CURRENT 800 + #define Z_CURRENT 600 #define Z_CURRENT_HOME Z_CURRENT #define Z_MICROSTEPS 16 #define Z_RSENSE 0.11 @@ -2565,8 +2567,8 @@ #endif #if AXIS_IS_TMC(E0) - #define E0_CURRENT 800 - #define E0_MICROSTEPS 16 + #define E0_CURRENT 550 + #define E0_MICROSTEPS 32 #define E0_RSENSE 0.11 #define E0_CHAIN_POS -1 //#define E0_INTERPOLATE true @@ -2719,7 +2721,7 @@ * Define your own with: * { , , hysteresis_start[1..8] } */ - #define CHOPPER_TIMING CHOPPER_DEFAULT_12V // All axes (override below) + #define CHOPPER_TIMING CHOPPER_DEFAULT_24V // All axes (override below) //#define CHOPPER_TIMING_X CHOPPER_TIMING // For X Axes (override below) //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X //#define CHOPPER_TIMING_Y CHOPPER_TIMING // For Y Axes (override below) @@ -2807,20 +2809,20 @@ * * Comment *_STALL_SENSITIVITY to disable sensorless homing for that axis. */ - //#define SENSORLESS_HOMING // StallGuard capable drivers only + #define SENSORLESS_HOMING // StallGuard capable drivers only #if EITHER(SENSORLESS_HOMING, SENSORLESS_PROBING) // TMC2209: 0...255. TMC2130: -64...63 - #define X_STALL_SENSITIVITY 8 + #define X_STALL_SENSITIVITY 90 #define X2_STALL_SENSITIVITY X_STALL_SENSITIVITY - #define Y_STALL_SENSITIVITY 8 + #define Y_STALL_SENSITIVITY 100 #define Y2_STALL_SENSITIVITY Y_STALL_SENSITIVITY //#define Z_STALL_SENSITIVITY 8 //#define Z2_STALL_SENSITIVITY Z_STALL_SENSITIVITY //#define Z3_STALL_SENSITIVITY Z_STALL_SENSITIVITY //#define Z4_STALL_SENSITIVITY Z_STALL_SENSITIVITY //#define SPI_ENDSTOPS // TMC2130 only - //#define IMPROVE_HOMING_RELIABILITY + #define IMPROVE_HOMING_RELIABILITY #endif /** @@ -2839,7 +2841,7 @@ * Beta feature! * Create a 50/50 square wave step pulse optimal for stepper drivers. */ - //#define SQUARE_WAVE_STEPPING + #define SQUARE_WAVE_STEPPING /** * Enable M122 debugging command for TMC stepper drivers. @@ -3526,7 +3528,7 @@ * * Execute certain G-code commands immediately after power-on. */ -//#define STARTUP_COMMANDS "M17 Z" +#define STARTUP_COMMANDS "M17 Z" /** * G-code Macros @@ -3773,9 +3775,9 @@ * Adds capability to work with any adjustable current drivers. * Implemented as G34 because M915 is deprecated. */ -//#define MECHANICAL_GANTRY_CALIBRATION +#define MECHANICAL_GANTRY_CALIBRATION #if ENABLED(MECHANICAL_GANTRY_CALIBRATION) - #define GANTRY_CALIBRATION_CURRENT 600 // Default calibration current in ma + #define GANTRY_CALIBRATION_CURRENT (Z_CURRENT/2) // Default calibration current in ma #define GANTRY_CALIBRATION_EXTRA_HEIGHT 15 // Extra distance in mm past Z_###_POS to move #define GANTRY_CALIBRATION_FEEDRATE 500 // Feedrate for correction move //#define GANTRY_CALIBRATION_TO_MIN // Enable to calibrate Z in the MIN direction diff --git a/config/examples/Qidi/Qidi 1/Configuration.h b/config/examples/Qidi/Qidi 1/Configuration.h index 78c2dc9160..73df5910b7 100644 --- a/config/examples/Qidi/Qidi 1/Configuration.h +++ b/config/examples/Qidi/Qidi 1/Configuration.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Qidi/Qidi 1" + /** * Configuration.h * @@ -69,7 +71,7 @@ // @section info // Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes. +#define STRING_CONFIG_H_AUTHOR "Axel S." // Who made the changes. //#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) /** @@ -84,7 +86,7 @@ */ // Show the Marlin bootscreen on startup. ** ENABLE FOR PRODUCTION ** -#define SHOW_BOOTSCREEN +//#define SHOW_BOOTSCREEN // Show the bitmap in Marlin/_Bootscreen.h on startup. //#define SHOW_CUSTOM_BOOTSCREEN @@ -134,11 +136,11 @@ // Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_RAMPS_14_EFB + #define MOTHERBOARD BOARD_MIGHTYBOARD_REVE #endif // Name displayed in the LCD "Ready" message and Info menu -//#define CUSTOM_MACHINE_NAME "3D Printer" +#define CUSTOM_MACHINE_NAME "Quidi 1" // Printer's unique ID, used by some programs to differentiate between machines. // Choose your own or use a service like https://www.uuidgenerator.net/version4 @@ -306,8 +308,8 @@ // Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing). // The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder). // For the other hotends it is their distance from the extruder 0 hotend. -//#define HOTEND_OFFSET_X { 0.0, 20.00 } // (mm) relative X-offset for each nozzle -//#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle +//#define HOTEND_OFFSET_X { 0.0, -34.00 } // (mm) relative X-offset for each nozzle +//#define HOTEND_OFFSET_Y { 0.0, 0.00 } // (mm) relative Y-offset for each nozzle //#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle // @section machine @@ -416,7 +418,7 @@ * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. */ -#define TEMP_SENSOR_0 1 +#define TEMP_SENSOR_0 -2 #define TEMP_SENSOR_1 0 #define TEMP_SENSOR_2 0 #define TEMP_SENSOR_3 0 @@ -424,7 +426,7 @@ #define TEMP_SENSOR_5 0 #define TEMP_SENSOR_6 0 #define TEMP_SENSOR_7 0 -#define TEMP_SENSOR_BED 0 +#define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 #define TEMP_SENSOR_COOLER 0 @@ -444,11 +446,11 @@ //#define TEMP_SENSOR_1_AS_REDUNDANT #define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10 -#define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 +#define TEMP_RESIDENCY_TIME 0 // (seconds) Time to wait for hotend to "settle" in M109 #define TEMP_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer #define TEMP_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target -#define TEMP_BED_RESIDENCY_TIME 10 // (seconds) Time to wait for bed to "settle" in M190 +#define TEMP_BED_RESIDENCY_TIME 0 // (seconds) Time to wait for bed to "settle" in M190 #define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer #define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target @@ -510,16 +512,17 @@ //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) // Set/get with gcode: M301 E[extruder number, 0-2] + // Qidi1 Auto tune #if ENABLED(PID_PARAMS_PER_HOTEND) // Specify between 1 and HOTENDS values per array. // If fewer than EXTRUDER values are provided, the last element will be repeated. - #define DEFAULT_Kp_LIST { 22.20, 22.20 } - #define DEFAULT_Ki_LIST { 1.08, 1.08 } - #define DEFAULT_Kd_LIST { 114.00, 114.00 } + #define DEFAULT_Kp_LIST { 19.35, 19.35 } + #define DEFAULT_Ki_LIST { 3.81, 3.81 } + #define DEFAULT_Kd_LIST { 24.57, 24.57 } #else - #define DEFAULT_Kp 22.20 - #define DEFAULT_Ki 1.08 - #define DEFAULT_Kd 114.00 + #define DEFAULT_Kp 19.35 + #define DEFAULT_Ki 3.81 + #define DEFAULT_Kd 24.57 #endif #endif // PIDTEMP @@ -613,7 +616,7 @@ //#define PID_DEBUG // Sends debug data to the serial port. Use 'M303 D' to toggle activation. //#define PID_OPENLOOP // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX //#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay - #define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature + #define PID_FUNCTIONAL_RANGE 15 // If the temperature difference between the target temperature and the actual temperature // is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max. #endif @@ -655,7 +658,7 @@ #define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders #define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed -#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber +//#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber #define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling //=========================================================================== @@ -683,11 +686,11 @@ // Specify here all the endstop connectors that are connected to any endstop or probe. // Almost all printers will be using one per axis. Probes will use one or more of the // extra connectors. Leave undefined any used for non-endstop and non-probe purposes. -#define USE_XMIN_PLUG -#define USE_YMIN_PLUG +//#define USE_XMIN_PLUG +//#define USE_YMIN_PLUG #define USE_ZMIN_PLUG -//#define USE_XMAX_PLUG -//#define USE_YMAX_PLUG +#define USE_XMAX_PLUG +#define USE_YMAX_PLUG //#define USE_ZMAX_PLUG // Enable pullup for all endstops to prevent a floating state @@ -719,9 +722,9 @@ // Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). #define X_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. #define Y_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define X_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. +#define Z_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define X_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Y_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. #define Z_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. #define Z_MIN_PROBE_ENDSTOP_INVERTING false // Set to true to invert the logic of the probe. @@ -806,14 +809,16 @@ * Override with M92 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 500 } +// Really Sailfish... got enough precision on that float for an 8 bit system? +// I'm leaving this in for the sake of posterity. +#define DEFAULT_AXIS_STEPS_PER_UNIT { 94.139704, 94.139704, 400, 96.275201870333662468889989185642 } /** * Default Max Feed Rate (mm/s) * Override with M203 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 } +#define DEFAULT_MAX_FEEDRATE { 250, 250, 20, 100 } //#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 #if ENABLED(LIMITED_MAX_FR_EDITING) @@ -826,7 +831,7 @@ * Override with M201 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 } +#define DEFAULT_MAX_ACCELERATION { 1000, 1000, 100, 5000 } //#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 #if ENABLED(LIMITED_MAX_ACCEL_EDITING) @@ -841,9 +846,9 @@ * M204 R Retract Acceleration * M204 T Travel Acceleration */ -#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves +#define DEFAULT_ACCELERATION 250 // X, Y, Z and E max acceleration for printing moves +#define DEFAULT_RETRACT_ACCELERATION 5000 // E acceleration for retracts +#define DEFAULT_TRAVEL_ACCELERATION 500 // X, Y, Z acceleration for travel (non printing) moves /** * Default Jerk limits (mm/s) @@ -867,7 +872,7 @@ #endif #endif -#define DEFAULT_EJERK 5.0 // May be used by Linear Advance +#define DEFAULT_EJERK 2.0 // May be used by Linear Advance /** * Junction Deviation Factor @@ -877,7 +882,7 @@ * https://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html */ #if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.013 // (mm) Distance from real junction edge + #define JUNCTION_DEVIATION_MM 0.64 // (mm) Distance from real junction edge #define JD_HANDLE_SMALL_SEGMENTS // Use curvature estimation instead of just the junction angle // for small segments (< 1mm) with large junction angles (> 135°). #endif @@ -890,7 +895,7 @@ * * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained */ -//#define S_CURVE_ACCELERATION +#define S_CURVE_ACCELERATION //=========================================================================== //============================= Z Probe Options ============================= @@ -1190,14 +1195,14 @@ // @section machine // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR false +#define INVERT_X_DIR true #define INVERT_Y_DIR true -#define INVERT_Z_DIR false +#define INVERT_Z_DIR true // @section extruder // For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR false +#define INVERT_E0_DIR true #define INVERT_E1_DIR false #define INVERT_E2_DIR false #define INVERT_E3_DIR false @@ -1216,7 +1221,7 @@ * - Use a low value (i.e., Z_MIN_POS) if the nozzle falls down to the bed. * - Use a large value (i.e., Z_MAX_POS) if the bed falls down, away from the nozzle. */ -//#define Z_IDLE_HEIGHT Z_HOME_POS +#define Z_IDLE_HEIGHT Z_MAX_POS //#define Z_HOMING_HEIGHT 4 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ... // Be sure to have this much clearance over your Z_MAX_POS to prevent grinding. @@ -1225,23 +1230,23 @@ // Direction of endstops when homing; 1=MAX, -1=MIN // :[-1,1] -#define X_HOME_DIR -1 -#define Y_HOME_DIR -1 +#define X_HOME_DIR 1 +#define Y_HOME_DIR 1 #define Z_HOME_DIR -1 // @section machine // The size of the printable area -#define X_BED_SIZE 200 -#define Y_BED_SIZE 200 +#define X_BED_SIZE 230 +#define Y_BED_SIZE 150 // Travel limits (mm) after homing, corresponding to endstop positions. #define X_MIN_POS 0 #define Y_MIN_POS 0 #define Z_MIN_POS 0 -#define X_MAX_POS X_BED_SIZE -#define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 200 +#define X_MAX_POS 265 +#define Y_MAX_POS 150 +#define Z_MAX_POS 150 /** * Software Endstops @@ -1570,7 +1575,7 @@ // @section homing // The center of the bed is at (X=0, Y=0) -//#define BED_CENTER_AT_0_0 +#define BED_CENTER_AT_0_0 // Manually set the home position. Leave these undefined for automatic settings. // For DELTA this is the top-center of the Cartesian print volume. @@ -1672,12 +1677,12 @@ * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) */ -//#define EEPROM_SETTINGS // Persistent storage with M500 and M501 +#define EEPROM_SETTINGS // Persistent storage with M500 and M501 //#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! -#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. +//#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. #define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load #if ENABLED(EEPROM_SETTINGS) - //#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. + #define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. #endif // @@ -1706,14 +1711,14 @@ // Preheat Constants - Up to 5 are supported without changes // #define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 180 -#define PREHEAT_1_TEMP_BED 70 +#define PREHEAT_1_TEMP_HOTEND 200 +#define PREHEAT_1_TEMP_BED 50 #define PREHEAT_1_TEMP_CHAMBER 35 #define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 #define PREHEAT_2_LABEL "ABS" -#define PREHEAT_2_TEMP_HOTEND 240 -#define PREHEAT_2_TEMP_BED 110 +#define PREHEAT_2_TEMP_HOTEND 220 +#define PREHEAT_2_TEMP_BED 100 #define PREHEAT_2_TEMP_CHAMBER 35 #define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 @@ -1728,7 +1733,7 @@ * P1 Raise the nozzle always to Z-park height. * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. */ -//#define NOZZLE_PARK_FEATURE +#define NOZZLE_PARK_FEATURE #if ENABLED(NOZZLE_PARK_FEATURE) // Specify a park position as { X, Y, Z_raise } @@ -1936,14 +1941,14 @@ * SD Card support is disabled by default. If your controller has an SD slot, * you must uncomment the following option or it won't work. */ -//#define SDSUPPORT +#define SDSUPPORT /** * SD CARD: ENABLE CRC * * Use CRC checks and retries on the SD communication. */ -//#define SD_CHECK_AND_RETRY +#define SD_CHECK_AND_RETRY /** * LCD Menu Items @@ -1952,7 +1957,7 @@ * just remove some extraneous menu items to recover space. */ //#define NO_LCD_MENUS -//#define SLIM_LCD_MENUS +#define SLIM_LCD_MENUS // // ENCODER SETTINGS @@ -1991,7 +1996,7 @@ // If CLOCKWISE normally moves DOWN this makes it go UP. // If CLOCKWISE normally moves UP this makes it go DOWN. // -//#define REVERSE_MENU_DIRECTION +#define REVERSE_MENU_DIRECTION // // This option reverses the encoder direction for Select Screen. @@ -2006,7 +2011,7 @@ // // Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. // -//#define INDIVIDUAL_AXIS_HOMING_MENU +#define INDIVIDUAL_AXIS_HOMING_MENU // // SPEAKER/BUZZER @@ -2167,7 +2172,7 @@ // https://github.com/mikeshub/SailfishLCD // Uses the code directly from Sailfish // -//#define FF_INTERFACEBOARD +#define FF_INTERFACEBOARD // // TFT GLCD Panel with Marlin UI diff --git a/config/examples/Qidi/Qidi 1/Configuration_adv.h b/config/examples/Qidi/Qidi 1/Configuration_adv.h index 5335fa012a..596ea67acd 100644 --- a/config/examples/Qidi/Qidi 1/Configuration_adv.h +++ b/config/examples/Qidi/Qidi 1/Configuration_adv.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Qidi/Qidi 1" + /** * Configuration_adv.h * @@ -238,8 +240,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 120 // Seconds + #define THERMAL_PROTECTION_HYSTERESIS 5 // Degrees Celsius //#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops #if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP) @@ -258,7 +260,7 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 20 // Seconds + #define WATCH_TEMP_PERIOD 120 // Seconds #define WATCH_TEMP_INCREASE 2 // Degrees Celsius #endif @@ -266,7 +268,7 @@ * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_BED_PERIOD 60 // Seconds #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius /** @@ -540,8 +542,8 @@ * Multiple extruders can be assigned to the same pin in which case * the fan will turn on when any selected extruder is above the threshold. */ -#define E0_AUTO_FAN_PIN -1 -#define E1_AUTO_FAN_PIN -1 +#define E0_AUTO_FAN_PIN EX1_FAN_PIN +#define E1_AUTO_FAN_PIN EX2_FAN_PIN #define E2_AUTO_FAN_PIN -1 #define E3_AUTO_FAN_PIN -1 #define E4_AUTO_FAN_PIN -1 @@ -741,7 +743,7 @@ //#define HOMING_BACKOFF_POST_MM { 2, 2, 2 } // (mm) Backoff from endstops after homing -//#define QUICK_HOME // If G28 contains XY do a diagonal move first +#define QUICK_HOME // If G28 contains XY do a diagonal move first //#define HOME_Y_BEFORE_X // If G28 contains XY home Y before X //#define HOME_Z_FIRST // Home Z first. Requires a Z-MIN endstop (not a probe). //#define CODEPENDENT_XY_HOMING // If X/Y can't home without homing Y/X first @@ -928,7 +930,7 @@ #define DEFAULT_STEPPER_DEACTIVE_TIME 120 #define DISABLE_INACTIVE_X true #define DISABLE_INACTIVE_Y true -#define DISABLE_INACTIVE_Z true // Set 'false' if the nozzle could fall onto your printed part! +#define DISABLE_INACTIVE_Z false // Set 'false' if the nozzle could fall onto your printed part! #define DISABLE_INACTIVE_E true // Default Minimum Feedrates for printing and travel moves @@ -1102,14 +1104,14 @@ /** * I2C-based DIGIPOTs (e.g., Azteeg X3 Pro) */ -//#define DIGIPOT_MCP4018 // Requires https://github.com/felias-fogg/SlowSoftI2CMaster +#define DIGIPOT_MCP4018 // Requires https://github.com/felias-fogg/SlowSoftI2CMaster //#define DIGIPOT_MCP4451 #if EITHER(DIGIPOT_MCP4018, DIGIPOT_MCP4451) - #define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT:4 AZTEEG_X3_PRO:8 MKS_SBASE:5 MIGHTYBOARD_REVE:5 + #define DIGIPOT_I2C_NUM_CHANNELS 5 // 5DPRINT:4 AZTEEG_X3_PRO:8 MKS_SBASE:5 MIGHTYBOARD_REVE:5 // Actual motor currents in Amps. The number of entries must match DIGIPOT_I2C_NUM_CHANNELS. // These correspond to the physical drivers, so be mindful if the order is changed. - #define DIGIPOT_I2C_MOTOR_CURRENTS { 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0 } // AZTEEG_X3_PRO + #define DIGIPOT_I2C_MOTOR_CURRENTS { 0.84, 0.84, 0.4, 1.0, 1.0 } // MIGHTYBOARD_REVE //#define DIGIPOT_USE_RAW_VALUES // Use DIGIPOT_MOTOR_CURRENT raw wiper values (instead of A4988 motor currents) @@ -1123,7 +1125,7 @@ * AZTEEG_X5_MINI_WIFI 0x58 0x5C MCP4451 * MIGHTYBOARD_REVE 0x2F (0x5E) MCP4018 */ - //#define DIGIPOT_I2C_ADDRESS_A 0x2C // Unshifted slave address for first DIGIPOT + #define DIGIPOT_I2C_ADDRESS_A 0x2F // Unshifted slave address for first DIGIPOT //#define DIGIPOT_I2C_ADDRESS_B 0x2D // Unshifted slave address for second DIGIPOT #endif @@ -1138,7 +1140,7 @@ #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines #if IS_ULTIPANEL #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position" - #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen + //#define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen #endif #endif @@ -1196,11 +1198,11 @@ //#define NEO2_COLOR_PRESETS // Enable a second NeoPixel Preset Color menu option #if ENABLED(LED_COLOR_PRESETS) #define LED_USER_PRESET_RED 255 // User defined RED value - #define LED_USER_PRESET_GREEN 128 // User defined GREEN value - #define LED_USER_PRESET_BLUE 0 // User defined BLUE value + #define LED_USER_PRESET_GREEN 255 // User defined GREEN value + #define LED_USER_PRESET_BLUE 255 // User defined BLUE value #define LED_USER_PRESET_WHITE 255 // User defined WHITE value #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity - //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup + #define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup #endif #if ENABLED(NEO2_COLOR_PRESETS) #define NEO2_USER_PRESET_RED 255 // User defined RED value @@ -1301,7 +1303,7 @@ //#define BROWSE_MEDIA_ON_INSERT // Open the file browser when media is inserted - #define EVENT_GCODE_SD_ABORT "G28XY" // G-code to run on SD Abort Print (e.g., "G28XY" or "G27") + #define EVENT_GCODE_SD_ABORT "G27" // G-code to run on SD Abort Print (e.g., "G28XY" or "G27") #if ENABLED(PRINTER_EVENT_LEDS) #define PE_LEDS_COMPLETED_TIME (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination @@ -1982,7 +1984,7 @@ // // G2/G3 Arc Support // -#define ARC_SUPPORT // Disable this feature to save ~3226 bytes +//#define ARC_SUPPORT // Disable this feature to save ~3226 bytes #if ENABLED(ARC_SUPPORT) #define MM_PER_ARC_SEGMENT 1 // (mm) Length (or minimum length) of each arc segment //#define ARC_SEGMENTS_PER_R 1 // Max segment length, MM_PER = Min @@ -2311,19 +2313,19 @@ * * Enable PARK_HEAD_ON_PAUSE to add the G-code M125 Pause and Park. */ -//#define ADVANCED_PAUSE_FEATURE +#define ADVANCED_PAUSE_FEATURE #if ENABLED(ADVANCED_PAUSE_FEATURE) #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. // This short retract is done immediately, before parking the nozzle. #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast. #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload. + #define FILAMENT_CHANGE_UNLOAD_LENGTH 80 // (mm) The length of filament for a complete unload. // For Bowden, the full length of the tube and nozzle. // For direct drive, the full length of the nozzle. // Set to 0 for manual unloading. #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE 6 // (mm/s) Slow move when starting load. - #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 0 // (mm) Slow length, to allow time to insert material. + #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 80 // (mm) Slow length, to allow time to insert material. // 0 to disable start loading and skip to fast load only #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast. #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. @@ -2349,10 +2351,10 @@ #define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed. #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change. - //#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. + #define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. //#define HOME_BEFORE_FILAMENT_CHANGE // If needed, home before parking for filament change - //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. + #define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) #endif diff --git a/config/examples/Raiscube/A8r/Configuration.h b/config/examples/Raiscube/A8r/Configuration.h index 78c2dc9160..b2ef0c00e0 100644 --- a/config/examples/Raiscube/A8r/Configuration.h +++ b/config/examples/Raiscube/A8r/Configuration.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Raiscube/A8r" + /** * Configuration.h * @@ -69,7 +71,7 @@ // @section info // Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes. +#define STRING_CONFIG_H_AUTHOR "(mphun, Raiscube A8r config)" // Who made the changes. //#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) /** @@ -127,7 +129,7 @@ * * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ -#define BAUDRATE 250000 +#define BAUDRATE 115200 // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH @@ -138,7 +140,7 @@ #endif // Name displayed in the LCD "Ready" message and Info menu -//#define CUSTOM_MACHINE_NAME "3D Printer" +#define CUSTOM_MACHINE_NAME "Danny's Printer" // Printer's unique ID, used by some programs to differentiate between machines. // Choose your own or use a service like https://www.uuidgenerator.net/version4 @@ -150,7 +152,7 @@ // :[0, 1, 2, 3, 4, 5, 6, 7, 8] #define EXTRUDERS 1 -// Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc. +// The Raiscube A8r extruder is designed for 1.75mm #define DEFAULT_NOMINAL_FILAMENT_DIA 1.75 // For Cyclops or any "multi-extruder" that shares a single nozzle. @@ -416,7 +418,7 @@ * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. */ -#define TEMP_SENSOR_0 1 +#define TEMP_SENSOR_0 11 #define TEMP_SENSOR_1 0 #define TEMP_SENSOR_2 0 #define TEMP_SENSOR_3 0 @@ -424,7 +426,7 @@ #define TEMP_SENSOR_5 0 #define TEMP_SENSOR_6 0 #define TEMP_SENSOR_7 0 -#define TEMP_SENSOR_BED 0 +#define TEMP_SENSOR_BED 11 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 #define TEMP_SENSOR_COOLER 0 @@ -480,7 +482,7 @@ #define HEATER_5_MAXTEMP 275 #define HEATER_6_MAXTEMP 275 #define HEATER_7_MAXTEMP 275 -#define BED_MAXTEMP 150 +#define BED_MAXTEMP 130 #define CHAMBER_MAXTEMP 60 /** @@ -510,16 +512,17 @@ //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) // Set/get with gcode: M301 E[extruder number, 0-2] + // Tuned by ralf-e. Always re-tune for your machine! #if ENABLED(PID_PARAMS_PER_HOTEND) // Specify between 1 and HOTENDS values per array. // If fewer than EXTRUDER values are provided, the last element will be repeated. - #define DEFAULT_Kp_LIST { 22.20, 22.20 } - #define DEFAULT_Ki_LIST { 1.08, 1.08 } - #define DEFAULT_Kd_LIST { 114.00, 114.00 } + #define DEFAULT_Kp_LIST { 16.83, 16.83 } + #define DEFAULT_Ki_LIST { 1.02, 1.02 } + #define DEFAULT_Kd_LIST { 69.29, 69.29 } #else - #define DEFAULT_Kp 22.20 - #define DEFAULT_Ki 1.08 - #define DEFAULT_Kd 114.00 + #define DEFAULT_Kp 16.83 + #define DEFAULT_Ki 1.02 + #define DEFAULT_Kd 69.29 #endif #endif // PIDTEMP @@ -540,7 +543,7 @@ * heater. If your configuration is significantly different than this and you don't understand * the issues involved, don't use bed PID until someone else verifies that your hardware works. */ -//#define PIDTEMPBED +#define PIDTEMPBED //#define BED_LIMIT_SWITCHING @@ -556,11 +559,11 @@ //#define MIN_BED_POWER 0 //#define PID_BED_DEBUG // Sends debug data to the serial port. - // 120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - // from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) - #define DEFAULT_bedKp 10.00 - #define DEFAULT_bedKi .023 - #define DEFAULT_bedKd 305.4 + // Raiscube A8r + // original Bed + generic Build surface sheet (PID-Autotune: M303 E-1 S60 C5): + #define DEFAULT_bedKp 153.92 + #define DEFAULT_bedKi 28.47 + #define DEFAULT_bedKd 554.84 // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. #endif // PIDTEMPBED @@ -717,9 +720,9 @@ #endif // Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. +#define X_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Y_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Z_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. #define X_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. #define Y_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. #define Z_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. @@ -762,7 +765,7 @@ // Enable this feature if all enabled endstop pins are interrupt-capable. // This will remove the need to poll the interrupt pins, saving many CPU cycles. -//#define ENDSTOP_INTERRUPTS_FEATURE +#define ENDSTOP_INTERRUPTS_FEATURE /** * Endstop Noise Threshold @@ -806,14 +809,21 @@ * Override with M92 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 500 } +//#define DEFAULT_AXIS_STEPS_PER_UNIT { 100, 100, 400, 95 } +//#define DEFAULT_AXIS_STEPS_PER_UNIT {78.7402,78.7402,200*8/3,760*1.1} +#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 95 } /** * Default Max Feed Rate (mm/s) * Override with M203 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 } +//#define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 } + +// Firmware V2.0 defaults (Vmax): +// Vmax x: 400, Vmax y: 400, Vmax z: 4, Vmax e: 25 +#define DEFAULT_MAX_FEEDRATE { 400, 400, 4, 25 } +//#define DEFAULT_MAX_FEEDRATE { 400, 400, 20, 50 } //#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 #if ENABLED(LIMITED_MAX_FR_EDITING) @@ -826,7 +836,12 @@ * Override with M201 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 } +//#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 } + +// Firmware V2.0 defaults (Amax): +// Amx x: 9000, Amax Y: 5000, Amax z: 50, Amax e: 10000 +#define DEFAULT_MAX_ACCELERATION { 9000, 5000, 50, 10000 } +//#define DEFAULT_MAX_ACCELERATION { 10000, 10000, 200, 10000 } //#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 #if ENABLED(LIMITED_MAX_ACCEL_EDITING) @@ -841,9 +856,12 @@ * M204 R Retract Acceleration * M204 T Travel Acceleration */ -#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves + +// Firmware V2.0 defaults: +// Accel: 1000 A-retract: 1000 +#define DEFAULT_ACCELERATION 1000 // X, Y, Z and E acceleration for printing moves +#define DEFAULT_RETRACT_ACCELERATION 1000 // E acceleration for retracts +#define DEFAULT_TRAVEL_ACCELERATION 1000 // X, Y, Z acceleration for travel (non printing) moves /** * Default Jerk limits (mm/s) @@ -855,6 +873,8 @@ */ //#define CLASSIC_JERK #if ENABLED(CLASSIC_JERK) + // Firmware V2.0 defaults: + // XY: 10, Z: +000.30, E: 5 #define DEFAULT_XJERK 10.0 #define DEFAULT_YJERK 10.0 #define DEFAULT_ZJERK 0.3 @@ -877,7 +897,7 @@ * https://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html */ #if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.013 // (mm) Distance from real junction edge + #define JUNCTION_DEVIATION_MM 0.04 // (mm) Distance from real junction edge #define JD_HANDLE_SMALL_SEGMENTS // Use curvature estimation instead of just the junction angle // for small segments (< 1mm) with large junction angles (> 135°). #endif @@ -1055,7 +1075,20 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +//#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } + +// ANET A8: FRONT-MOUNTED SENSOR WITH 3D PRINTED MOUNT +//#define NOZZLE_TO_PROBE_OFFSET { -28, -45, 0 } + +// THESE ARE FOR THE OFFICIAL ANET REAR-MOUNTED SENSOR +//#define NOZZLE_TO_PROBE_OFFSET { -1, 3, 0 } + +// ANET A6 with BLTouch/3D-Touch mounted right to the nozzle +#define NOZZLE_TO_PROBE_OFFSET { 39, 0, 0 } + +// ANET A6 with BLTouch/3D-Touch betwen Fan and Belt +// (mount: https://github.com/ralf-e/ANET_A6_modifications/tree/master/A6_X-Axis) +//#define NOZZLE_TO_PROBE_OFFSET { -30, 15, 0.75 } // Most probes should stay away from the edges of the bed, but // with NOZZLE_AS_PROBE this can be negative for a wider probing area. @@ -1063,12 +1096,13 @@ // X and Y axis travel speed (mm/min) between probes #define XY_PROBE_FEEDRATE (133*60) +//#define XY_PROBE_FEEDRATE (100*60) // Feedrate (mm/min) for the first approach when double-probing (MULTIPLE_PROBING == 2) #define Z_PROBE_FEEDRATE_FAST (4*60) // Feedrate (mm/min) for the "accurate" probe of each point -#define Z_PROBE_FEEDRATE_SLOW (Z_PROBE_FEEDRATE_FAST / 2) +#define Z_PROBE_FEEDRATE_SLOW (Z_PROBE_FEEDRATE_FAST / 3) /** * Probe Activation Switch @@ -1106,7 +1140,7 @@ * A total of 2 does fast/slow probes with a weighted average. * A total of 3 or more adds more slow probes, taking the average. */ -//#define MULTIPLE_PROBING 2 +#define MULTIPLE_PROBING 2 //#define EXTRA_PROBING 1 /** @@ -1123,11 +1157,16 @@ * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. */ -#define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow -#define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points -#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes -//#define Z_AFTER_PROBING 5 // Z position after probing is done +#if 1 // 0 for less clearance + #define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow + #define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points +#else + #define Z_CLEARANCE_DEPLOY_PROBE 5 // Z Clearance for Deploy/Stow + #define Z_CLEARANCE_BETWEEN_PROBES 3 // Z Clearance between probe points +#endif +#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes +//#define Z_AFTER_PROBING 5 // Z position after probing is done #define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping // For M851 give a range for adjusting the Z probe offset @@ -1150,12 +1189,12 @@ * These options are most useful for the BLTouch probe, but may also improve * readings with inductive probes and piezo sensors. */ -//#define PROBING_HEATERS_OFF // Turn heaters off when probing +#define PROBING_HEATERS_OFF // Turn heaters off when probing #if ENABLED(PROBING_HEATERS_OFF) //#define WAIT_FOR_BED_HEATER // Wait for bed to heat back up between probes (to improve accuracy) //#define WAIT_FOR_HOTEND // Wait for hotend to heat back up between probes (to improve accuracy & prevent cold extrude) #endif -//#define PROBING_FANS_OFF // Turn fans off when probing +#define PROBING_FANS_OFF // Turn fans off when probing //#define PROBING_STEPPERS_OFF // Turn steppers off (unless needed to hold position) when probing //#define DELAY_BEFORE_PROBING 200 // (ms) To prevent vibrations from triggering piezo sensors @@ -1190,14 +1229,14 @@ // @section machine // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR false -#define INVERT_Y_DIR true -#define INVERT_Z_DIR false +#define INVERT_X_DIR true +#define INVERT_Y_DIR false +#define INVERT_Z_DIR true // @section extruder // For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR false +#define INVERT_E0_DIR true #define INVERT_E1_DIR false #define INVERT_E2_DIR false #define INVERT_E3_DIR false @@ -1232,16 +1271,19 @@ // @section machine // The size of the printable area -#define X_BED_SIZE 200 -#define Y_BED_SIZE 200 +//#define X_BED_SIZE 210 +//#define Y_BED_SIZE 210 // Travel limits (mm) after homing, corresponding to endstop positions. -#define X_MIN_POS 0 -#define Y_MIN_POS 0 +#define X_BED_SIZE 210 +#define Y_BED_SIZE 210 +#define X_MIN_POS -3 +#define Y_MIN_POS -3 #define Z_MIN_POS 0 +#define Z_MAX_POS 225 + #define X_MAX_POS X_BED_SIZE #define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 200 /** * Software Endstops @@ -1454,7 +1496,7 @@ #if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR) // Set the number of grid points per dimension. - #define GRID_MAX_POINTS_X 3 + #define GRID_MAX_POINTS_X 4 #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X // Probe along the Y axis, advancing X after each column @@ -1507,7 +1549,7 @@ //=========================================================================== #define MESH_INSET 10 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 3 // Don't use more than 7 points per axis, implementation limited. + #define GRID_MAX_POINTS_X 5 // Don't use more than 7 points per axis, implementation limited. #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS @@ -1672,7 +1714,7 @@ * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) */ -//#define EEPROM_SETTINGS // Persistent storage with M500 and M501 +#define EEPROM_SETTINGS // Persistent storage with M500 and M501 //#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. #define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load @@ -1706,14 +1748,14 @@ // Preheat Constants - Up to 5 are supported without changes // #define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 180 -#define PREHEAT_1_TEMP_BED 70 +#define PREHEAT_1_TEMP_HOTEND 200 +#define PREHEAT_1_TEMP_BED 50 #define PREHEAT_1_TEMP_CHAMBER 35 #define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 #define PREHEAT_2_LABEL "ABS" -#define PREHEAT_2_TEMP_HOTEND 240 -#define PREHEAT_2_TEMP_BED 110 +#define PREHEAT_2_TEMP_HOTEND 230 +#define PREHEAT_2_TEMP_BED 70 #define PREHEAT_2_TEMP_CHAMBER 35 #define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 @@ -1936,7 +1978,7 @@ * SD Card support is disabled by default. If your controller has an SD slot, * you must uncomment the following option or it won't work. */ -//#define SDSUPPORT +#define SDSUPPORT /** * SD CARD: ENABLE CRC @@ -2014,7 +2056,7 @@ // If you have a speaker that can produce tones, enable it here. // By default Marlin assumes you have a buzzer with a fixed frequency. // -//#define SPEAKER +#define SPEAKER // // The duration and frequency for the UI feedback sound. @@ -2023,8 +2065,8 @@ // Note: Test audio output with the G-Code: // M300 S P // -//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 -//#define LCD_FEEDBACK_FREQUENCY_HZ 5000 +#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 40 +#define LCD_FEEDBACK_FREQUENCY_HZ 200 //============================================================================= //======================== LCD / Controller Selection ========================= @@ -2195,7 +2237,10 @@ // RepRapDiscount FULL GRAPHIC Smart Controller // https://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller // -//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER +#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER +#define ST7920_DELAY_1 DELAY_NS(150) +#define ST7920_DELAY_2 DELAY_NS(150) +#define ST7920_DELAY_3 DELAY_NS(150) // // K.3D Full Graphic Smart Controller diff --git a/config/examples/Raiscube/A8r/Configuration_adv.h b/config/examples/Raiscube/A8r/Configuration_adv.h index 5335fa012a..5344397eea 100644 --- a/config/examples/Raiscube/A8r/Configuration_adv.h +++ b/config/examples/Raiscube/A8r/Configuration_adv.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Raiscube/A8r" + /** * Configuration_adv.h * @@ -238,8 +240,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 60 // Seconds + #define THERMAL_PROTECTION_HYSTERESIS 10 // Degrees Celsius //#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops #if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP) @@ -258,21 +260,21 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 20 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 60 // Seconds + #define WATCH_TEMP_INCREASE 5 // Degrees Celsius #endif /** * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 60 // Seconds + #define THERMAL_PROTECTION_BED_HYSTERESIS 5 // Degrees Celsius /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds + #define WATCH_BED_TEMP_PERIOD 180 // Seconds #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius #endif @@ -377,7 +379,7 @@ * Enable Autotemp Mode with M104/M109 F S B. * Disable by sending M104/M109 with no F parameter (or F0 with AUTOTEMP_PROPORTIONAL). */ -#define AUTOTEMP +//#define AUTOTEMP #if ENABLED(AUTOTEMP) #define AUTOTEMP_OLDWEIGHT 0.98 // Turn on AUTOTEMP on M104/M109 by default using proportions set here @@ -867,7 +869,7 @@ // On a 300mm bed a 5% grade would give a misalignment of ~1.5cm #define G34_MAX_GRADE 5 // (%) Maximum incline that G34 will handle - #define Z_STEPPER_ALIGN_ITERATIONS 5 // Number of iterations to apply during alignment + #define Z_STEPPER_ALIGN_ITERATIONS 3 // Number of iterations to apply during alignment #define Z_STEPPER_ALIGN_ACC 0.02 // Stop iterating early if the accuracy is better than this #define RESTORE_LEVELING_AFTER_G34 // Restore leveling after G34 is done? // After G34, re-home Z (G28 Z) or just calculate it from the last probe heights? @@ -1278,7 +1280,7 @@ // The standard SD detect circuit reads LOW when media is inserted and HIGH when empty. // Enable this option and set to HIGH if your SD cards are incorrectly detected. - //#define SD_DETECT_STATE HIGH + #define SD_DETECT_STATE LOW //#define SD_IGNORE_AT_STARTUP // Don't mount the SD card when starting up //#define SDCARD_READONLY // Read-only SD card (to save over 2K of flash) @@ -1790,7 +1792,7 @@ * * Warning: Does not respect endstops! */ -//#define BABYSTEPPING +#define BABYSTEPPING #if ENABLED(BABYSTEPPING) //#define INTEGRATED_BABYSTEPPING // EXPERIMENTAL integration of babystepping into the Stepper ISR //#define BABYSTEP_WITHOUT_HOMING @@ -1982,7 +1984,7 @@ // // G2/G3 Arc Support // -#define ARC_SUPPORT // Disable this feature to save ~3226 bytes +//#define ARC_SUPPORT // Disable this feature to save ~3226 bytes #if ENABLED(ARC_SUPPORT) #define MM_PER_ARC_SEGMENT 1 // (mm) Length (or minimum length) of each arc segment //#define ARC_SEGMENTS_PER_R 1 // Max segment length, MM_PER = Min diff --git a/config/examples/RapideLite/RL200/Configuration.h b/config/examples/RapideLite/RL200/Configuration.h index 78c2dc9160..c1d2e05f02 100644 --- a/config/examples/RapideLite/RL200/Configuration.h +++ b/config/examples/RapideLite/RL200/Configuration.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "RapideLite/RL200" + /** * Configuration.h * @@ -69,7 +71,7 @@ // @section info // Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes. +#define STRING_CONFIG_H_AUTHOR "(platon42)" // Who made the changes. //#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) /** @@ -127,18 +129,18 @@ * * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ -#define BAUDRATE 250000 +#define BAUDRATE 115200 // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH // Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_RAMPS_14_EFB + #define MOTHERBOARD BOARD_RL200 #endif // Name displayed in the LCD "Ready" message and Info menu -//#define CUSTOM_MACHINE_NAME "3D Printer" +#define CUSTOM_MACHINE_NAME "Rapide Lite 200" // Printer's unique ID, used by some programs to differentiate between machines. // Choose your own or use a service like https://www.uuidgenerator.net/version4 @@ -318,7 +320,7 @@ * Enable and connect the power supply to the PS_ON_PIN. * Specify whether the power supply is active HIGH or active LOW. */ -//#define PSU_CONTROL +#define PSU_CONTROL //#define PSU_NAME "Power Supply" #if ENABLED(PSU_CONTROL) @@ -424,7 +426,7 @@ #define TEMP_SENSOR_5 0 #define TEMP_SENSOR_6 0 #define TEMP_SENSOR_7 0 -#define TEMP_SENSOR_BED 0 +#define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 #define TEMP_SENSOR_COOLER 0 @@ -472,15 +474,15 @@ // Above this temperature the heater will be switched off. // This can protect components from overheating, but NOT from shorts and failures. // (Use MINTEMP for thermistor short/failure protection.) -#define HEATER_0_MAXTEMP 275 -#define HEATER_1_MAXTEMP 275 -#define HEATER_2_MAXTEMP 275 -#define HEATER_3_MAXTEMP 275 -#define HEATER_4_MAXTEMP 275 -#define HEATER_5_MAXTEMP 275 -#define HEATER_6_MAXTEMP 275 -#define HEATER_7_MAXTEMP 275 -#define BED_MAXTEMP 150 +#define HEATER_0_MAXTEMP 250 +#define HEATER_1_MAXTEMP 250 +#define HEATER_2_MAXTEMP 250 +#define HEATER_3_MAXTEMP 250 +#define HEATER_4_MAXTEMP 250 +#define HEATER_5_MAXTEMP 250 +#define HEATER_6_MAXTEMP 250 +#define HEATER_7_MAXTEMP 250 +#define BED_MAXTEMP 120 #define CHAMBER_MAXTEMP 60 /** @@ -717,13 +719,13 @@ #endif // Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define X_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_PROBE_ENDSTOP_INVERTING false // Set to true to invert the logic of the probe. +#define X_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Y_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Z_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define X_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Y_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Z_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Z_MIN_PROBE_ENDSTOP_INVERTING true // Set to true to invert the logic of the probe. /** * Stepper Drivers @@ -743,15 +745,15 @@ * TMC5130, TMC5130_STANDALONE, TMC5160, TMC5160_STANDALONE * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'L6474', 'POWERSTEP01', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2160', 'TMC2160_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC2209', 'TMC2209_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE', 'TMC5160', 'TMC5160_STANDALONE'] */ -#define X_DRIVER_TYPE A4988 -#define Y_DRIVER_TYPE A4988 -#define Z_DRIVER_TYPE A4988 +#define X_DRIVER_TYPE DRV8825 +#define Y_DRIVER_TYPE DRV8825 +#define Z_DRIVER_TYPE DRV8825 //#define X2_DRIVER_TYPE A4988 //#define Y2_DRIVER_TYPE A4988 -//#define Z2_DRIVER_TYPE A4988 +#define Z2_DRIVER_TYPE DRV8825 //#define Z3_DRIVER_TYPE A4988 //#define Z4_DRIVER_TYPE A4988 -#define E0_DRIVER_TYPE A4988 +#define E0_DRIVER_TYPE DRV8825 //#define E1_DRIVER_TYPE A4988 //#define E2_DRIVER_TYPE A4988 //#define E3_DRIVER_TYPE A4988 @@ -806,14 +808,14 @@ * Override with M92 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 500 } +#define DEFAULT_AXIS_STEPS_PER_UNIT { 157, 157, 800, 195 } /** * Default Max Feed Rate (mm/s) * Override with M203 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 } +#define DEFAULT_MAX_FEEDRATE { 500, 500, 5, 25 } //#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 #if ENABLED(LIMITED_MAX_FR_EDITING) @@ -826,7 +828,7 @@ * Override with M201 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 } +#define DEFAULT_MAX_ACCELERATION { 9000, 9000, 100, 10000 } //#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 #if ENABLED(LIMITED_MAX_ACCEL_EDITING) @@ -890,7 +892,7 @@ * * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained */ -//#define S_CURVE_ACCELERATION +#define S_CURVE_ACCELERATION //=========================================================================== //============================= Z Probe Options ============================= @@ -1190,15 +1192,15 @@ // @section machine // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR false +#define INVERT_X_DIR true #define INVERT_Y_DIR true -#define INVERT_Z_DIR false +#define INVERT_Z_DIR true // @section extruder // For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR false -#define INVERT_E1_DIR false +#define INVERT_E0_DIR true +#define INVERT_E1_DIR true #define INVERT_E2_DIR false #define INVERT_E3_DIR false #define INVERT_E4_DIR false @@ -1241,7 +1243,7 @@ #define Z_MIN_POS 0 #define X_MAX_POS X_BED_SIZE #define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 200 +#define Z_MAX_POS 190 /** * Software Endstops @@ -1672,7 +1674,7 @@ * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) */ -//#define EEPROM_SETTINGS // Persistent storage with M500 and M501 +#define EEPROM_SETTINGS // Persistent storage with M500 and M501 //#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. #define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load @@ -1936,7 +1938,7 @@ * SD Card support is disabled by default. If your controller has an SD slot, * you must uncomment the following option or it won't work. */ -//#define SDSUPPORT +#define SDSUPPORT /** * SD CARD: ENABLE CRC @@ -2037,7 +2039,7 @@ // // Note: Usually sold with a white PCB. // -//#define REPRAP_DISCOUNT_SMART_CONTROLLER +#define REPRAP_DISCOUNT_SMART_CONTROLLER // // GT2560 (YHCB2004) LCD Display diff --git a/config/examples/RapideLite/RL200/Configuration_adv.h b/config/examples/RapideLite/RL200/Configuration_adv.h index 5335fa012a..be513bac32 100644 --- a/config/examples/RapideLite/RL200/Configuration_adv.h +++ b/config/examples/RapideLite/RL200/Configuration_adv.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "RapideLite/RL200" + /** * Configuration_adv.h * @@ -648,7 +650,7 @@ // // For Z set the number of stepper drivers // -#define NUM_Z_STEPPER_DRIVERS 1 // (1-4) Z options change based on how many +#define NUM_Z_STEPPER_DRIVERS 2 // (1-4) Z options change based on how many #if NUM_Z_STEPPER_DRIVERS > 1 // Enable if Z motor direction signals are the opposite of Z1 @@ -867,7 +869,7 @@ // On a 300mm bed a 5% grade would give a misalignment of ~1.5cm #define G34_MAX_GRADE 5 // (%) Maximum incline that G34 will handle - #define Z_STEPPER_ALIGN_ITERATIONS 5 // Number of iterations to apply during alignment + #define Z_STEPPER_ALIGN_ITERATIONS 3 // Number of iterations to apply during alignment #define Z_STEPPER_ALIGN_ACC 0.02 // Stop iterating early if the accuracy is better than this #define RESTORE_LEVELING_AFTER_G34 // Restore leveling after G34 is done? // After G34, re-home Z (G28 Z) or just calculate it from the last probe heights? diff --git a/config/examples/Renkforce/RF100/Configuration.h b/config/examples/Renkforce/RF100/Configuration.h index 78c2dc9160..eab54556d9 100644 --- a/config/examples/Renkforce/RF100/Configuration.h +++ b/config/examples/Renkforce/RF100/Configuration.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Renkforce/RF100" + /** * Configuration.h * @@ -127,7 +129,7 @@ * * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ -#define BAUDRATE 250000 +#define BAUDRATE 115200 // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH @@ -137,8 +139,11 @@ #define MOTHERBOARD BOARD_RAMPS_14_EFB #endif +#define FAN_PIN -1 +#define KILL_PIN 64 + // Name displayed in the LCD "Ready" message and Info menu -//#define CUSTOM_MACHINE_NAME "3D Printer" +#define CUSTOM_MACHINE_NAME "RF100" // Printer's unique ID, used by some programs to differentiate between machines. // Choose your own or use a service like https://www.uuidgenerator.net/version4 @@ -472,15 +477,15 @@ // Above this temperature the heater will be switched off. // This can protect components from overheating, but NOT from shorts and failures. // (Use MINTEMP for thermistor short/failure protection.) -#define HEATER_0_MAXTEMP 275 -#define HEATER_1_MAXTEMP 275 -#define HEATER_2_MAXTEMP 275 -#define HEATER_3_MAXTEMP 275 -#define HEATER_4_MAXTEMP 275 -#define HEATER_5_MAXTEMP 275 -#define HEATER_6_MAXTEMP 275 -#define HEATER_7_MAXTEMP 275 -#define BED_MAXTEMP 150 +#define HEATER_0_MAXTEMP 260 +#define HEATER_1_MAXTEMP 260 +#define HEATER_2_MAXTEMP 260 +#define HEATER_3_MAXTEMP 260 +#define HEATER_4_MAXTEMP 260 +#define HEATER_5_MAXTEMP 260 +#define HEATER_6_MAXTEMP 260 +#define HEATER_7_MAXTEMP 260 +#define BED_MAXTEMP 110 #define CHAMBER_MAXTEMP 60 /** @@ -506,20 +511,21 @@ #if ENABLED(PIDTEMP) //#define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) - //#define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) + #define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) // Set/get with gcode: M301 E[extruder number, 0-2] + // Renkforce RF100 #if ENABLED(PID_PARAMS_PER_HOTEND) // Specify between 1 and HOTENDS values per array. // If fewer than EXTRUDER values are provided, the last element will be repeated. - #define DEFAULT_Kp_LIST { 22.20, 22.20 } - #define DEFAULT_Ki_LIST { 1.08, 1.08 } - #define DEFAULT_Kd_LIST { 114.00, 114.00 } + #define DEFAULT_Kp_LIST { 19.0, 19.0 } + #define DEFAULT_Ki_LIST { 1.3, 1.3 } + #define DEFAULT_Kd_LIST { 70.1, 70.1 } #else - #define DEFAULT_Kp 22.20 - #define DEFAULT_Ki 1.08 - #define DEFAULT_Kd 114.00 + #define DEFAULT_Kp 19.0 + #define DEFAULT_Ki 1.3 + #define DEFAULT_Kd 70.1 #endif #endif // PIDTEMP @@ -684,10 +690,10 @@ // Almost all printers will be using one per axis. Probes will use one or more of the // extra connectors. Leave undefined any used for non-endstop and non-probe purposes. #define USE_XMIN_PLUG -#define USE_YMIN_PLUG +//#define USE_YMIN_PLUG #define USE_ZMIN_PLUG //#define USE_XMAX_PLUG -//#define USE_YMAX_PLUG +#define USE_YMAX_PLUG //#define USE_ZMAX_PLUG // Enable pullup for all endstops to prevent a floating state @@ -718,11 +724,11 @@ // Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). #define X_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. +#define Y_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. #define Z_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define X_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. +#define X_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. #define Y_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. +#define Z_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. #define Z_MIN_PROBE_ENDSTOP_INVERTING false // Set to true to invert the logic of the probe. /** @@ -806,14 +812,14 @@ * Override with M92 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 500 } +#define DEFAULT_AXIS_STEPS_PER_UNIT { 78.82, 78.82, 800, 116 } /** * Default Max Feed Rate (mm/s) * Override with M203 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 } +#define DEFAULT_MAX_FEEDRATE { 300, 300, 20, 25 } //#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 #if ENABLED(LIMITED_MAX_FR_EDITING) @@ -826,7 +832,7 @@ * Override with M201 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 } +#define DEFAULT_MAX_ACCELERATION { 500, 500, 100, 10000 } //#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 #if ENABLED(LIMITED_MAX_ACCEL_EDITING) @@ -841,9 +847,9 @@ * M204 R Retract Acceleration * M204 T Travel Acceleration */ -#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves +#define DEFAULT_ACCELERATION 500 // X, Y, Z and E acceleration for printing moves #define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves +#define DEFAULT_TRAVEL_ACCELERATION 500 // X, Y, Z acceleration for travel (non printing) moves /** * Default Jerk limits (mm/s) @@ -890,7 +896,7 @@ * * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained */ -//#define S_CURVE_ACCELERATION +#define S_CURVE_ACCELERATION //=========================================================================== //============================= Z Probe Options ============================= @@ -940,7 +946,7 @@ * Use G29 repeatedly, adjusting the Z height at each point with movement commands * or (with LCD_BED_LEVELING) the LCD controller. */ -//#define PROBE_MANUALLY +#define PROBE_MANUALLY /** * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. @@ -1192,12 +1198,12 @@ // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR false #define INVERT_Y_DIR true -#define INVERT_Z_DIR false +#define INVERT_Z_DIR true // @section extruder // For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR false +#define INVERT_E0_DIR true #define INVERT_E1_DIR false #define INVERT_E2_DIR false #define INVERT_E3_DIR false @@ -1218,7 +1224,7 @@ */ //#define Z_IDLE_HEIGHT Z_HOME_POS -//#define Z_HOMING_HEIGHT 4 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ... +#define Z_HOMING_HEIGHT 4 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ... // Be sure to have this much clearance over your Z_MAX_POS to prevent grinding. //#define Z_AFTER_HOMING 10 // (mm) Height to move to after homing Z @@ -1226,14 +1232,14 @@ // Direction of endstops when homing; 1=MAX, -1=MIN // :[-1,1] #define X_HOME_DIR -1 -#define Y_HOME_DIR -1 +#define Y_HOME_DIR 1 #define Z_HOME_DIR -1 // @section machine // The size of the printable area -#define X_BED_SIZE 200 -#define Y_BED_SIZE 200 +#define X_BED_SIZE 105 +#define Y_BED_SIZE 110 // Travel limits (mm) after homing, corresponding to endstop positions. #define X_MIN_POS 0 @@ -1241,7 +1247,7 @@ #define Z_MIN_POS 0 #define X_MAX_POS X_BED_SIZE #define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 200 +#define Z_MAX_POS 105 /** * Software Endstops @@ -1385,7 +1391,7 @@ * leveling in steps so you can manually adjust the Z height at each grid-point. * With an LCD controller the process is guided step-by-step. */ -//#define AUTO_BED_LEVELING_3POINT +#define AUTO_BED_LEVELING_3POINT //#define AUTO_BED_LEVELING_LINEAR //#define AUTO_BED_LEVELING_BILINEAR //#define AUTO_BED_LEVELING_UBL @@ -1518,7 +1524,7 @@ * Add a bed leveling sub-menu for ABL or MBL. * Include a guided procedure if manual probing is enabled. */ -//#define LCD_BED_LEVELING +#define LCD_BED_LEVELING #if ENABLED(LCD_BED_LEVELING) #define MESH_EDIT_Z_STEP 0.025 // (mm) Step size while manually probing Z axis. @@ -1672,7 +1678,7 @@ * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) */ -//#define EEPROM_SETTINGS // Persistent storage with M500 and M501 +#define EEPROM_SETTINGS // Persistent storage with M500 and M501 //#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. #define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load @@ -1706,16 +1712,16 @@ // Preheat Constants - Up to 5 are supported without changes // #define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 180 +#define PREHEAT_1_TEMP_HOTEND 200 #define PREHEAT_1_TEMP_BED 70 #define PREHEAT_1_TEMP_CHAMBER 35 -#define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 +#define PREHEAT_1_FAN_SPEED 255 // Value from 0 to 255 #define PREHEAT_2_LABEL "ABS" -#define PREHEAT_2_TEMP_HOTEND 240 +#define PREHEAT_2_TEMP_HOTEND 230 #define PREHEAT_2_TEMP_BED 110 #define PREHEAT_2_TEMP_CHAMBER 35 -#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 +#define PREHEAT_2_FAN_SPEED 255 // Value from 0 to 255 /** * Nozzle Park @@ -1728,7 +1734,7 @@ * P1 Raise the nozzle always to Z-park height. * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. */ -//#define NOZZLE_PARK_FEATURE +#define NOZZLE_PARK_FEATURE #if ENABLED(NOZZLE_PARK_FEATURE) // Specify a park position as { X, Y, Z_raise } @@ -1936,7 +1942,7 @@ * SD Card support is disabled by default. If your controller has an SD slot, * you must uncomment the following option or it won't work. */ -//#define SDSUPPORT +#define SDSUPPORT /** * SD CARD: ENABLE CRC @@ -1960,13 +1966,13 @@ // This option overrides the default number of encoder pulses needed to // produce one step. Should be increased for high-resolution encoders. // -//#define ENCODER_PULSES_PER_STEP 4 +#define ENCODER_PULSES_PER_STEP 4 // // Use this option to override the number of step signals required to // move between next/prev menu items. // -//#define ENCODER_STEPS_PER_MENU_ITEM 1 +#define ENCODER_STEPS_PER_MENU_ITEM 1 /** * Encoder Direction Options @@ -1983,7 +1989,7 @@ // // Set this option if CLOCKWISE causes values to DECREASE // -//#define REVERSE_ENCODER_DIRECTION +#define REVERSE_ENCODER_DIRECTION // // This option reverses the encoder direction for navigating LCD menus. @@ -2037,7 +2043,7 @@ // // Note: Usually sold with a white PCB. // -//#define REPRAP_DISCOUNT_SMART_CONTROLLER +#define REPRAP_DISCOUNT_SMART_CONTROLLER // // GT2560 (YHCB2004) LCD Display diff --git a/config/examples/Renkforce/RF100/Configuration_adv.h b/config/examples/Renkforce/RF100/Configuration_adv.h index 5335fa012a..78ad6d8f64 100644 --- a/config/examples/Renkforce/RF100/Configuration_adv.h +++ b/config/examples/Renkforce/RF100/Configuration_adv.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Renkforce/RF100" + /** * Configuration_adv.h * @@ -540,7 +542,7 @@ * Multiple extruders can be assigned to the same pin in which case * the fan will turn on when any selected extruder is above the threshold. */ -#define E0_AUTO_FAN_PIN -1 +#define E0_AUTO_FAN_PIN 9 #define E1_AUTO_FAN_PIN -1 #define E2_AUTO_FAN_PIN -1 #define E3_AUTO_FAN_PIN -1 @@ -553,7 +555,7 @@ #define COOLER_FAN_PIN -1 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50 -#define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed +#define EXTRUDER_AUTO_FAN_SPEED 100 // 255 == full speed #define CHAMBER_AUTO_FAN_TEMPERATURE 30 #define CHAMBER_AUTO_FAN_SPEED 255 #define COOLER_AUTO_FAN_TEMPERATURE 18 @@ -867,7 +869,7 @@ // On a 300mm bed a 5% grade would give a misalignment of ~1.5cm #define G34_MAX_GRADE 5 // (%) Maximum incline that G34 will handle - #define Z_STEPPER_ALIGN_ITERATIONS 5 // Number of iterations to apply during alignment + #define Z_STEPPER_ALIGN_ITERATIONS 3 // Number of iterations to apply during alignment #define Z_STEPPER_ALIGN_ACC 0.02 // Stop iterating early if the accuracy is better than this #define RESTORE_LEVELING_AFTER_G34 // Restore leveling after G34 is done? // After G34, re-home Z (G28 Z) or just calculate it from the last probe heights? @@ -1059,7 +1061,7 @@ * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the * lowest stepping frequencies. */ -//#define ADAPTIVE_STEP_SMOOTHING +#define ADAPTIVE_STEP_SMOOTHING /** * Custom Microstepping @@ -1175,7 +1177,7 @@ #endif // Include a page of printer information in the LCD Main Menu - //#define LCD_INFO_MENU + #define LCD_INFO_MENU #if ENABLED(LCD_INFO_MENU) //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages #endif @@ -1229,7 +1231,7 @@ #endif // Scroll a longer status message into view - //#define STATUS_MESSAGE_SCROLLING + #define STATUS_MESSAGE_SCROLLING // On the Info Screen, display XY with one decimal place when possible //#define LCD_DECIMAL_SMALL_XY @@ -1384,7 +1386,7 @@ //#define LONG_FILENAME_HOST_SUPPORT // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES + #define SCROLL_LONG_FILENAMES // Leave the heaters on after Stop Print (not recommended!) //#define SD_ABORT_NO_COOLDOWN @@ -1798,7 +1800,7 @@ //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way //#define BABYSTEP_MILLIMETER_UNITS // Specify BABYSTEP_MULTIPLICATOR_(XY|Z) in mm instead of micro-steps - #define BABYSTEP_MULTIPLICATOR_Z 1 // (steps or mm) Steps or millimeter distance for each Z babystep + #define BABYSTEP_MULTIPLICATOR_Z 100 // (steps or mm) Steps or millimeter distance for each Z babystep #define BABYSTEP_MULTIPLICATOR_XY 1 // (steps or mm) Steps or millimeter distance for each XY babystep //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. @@ -1837,12 +1839,12 @@ * * See https://marlinfw.org/docs/features/lin_advance.html for full instructions. */ -//#define LIN_ADVANCE +#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) //#define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // If enabled, this will generate debug information output over USB. - //#define EXPERIMENTAL_SCURVE // Enable this option to permit S-Curve Acceleration + #define EXPERIMENTAL_SCURVE // Enable this option to permit S-Curve Acceleration #endif // @section leveling @@ -1853,11 +1855,11 @@ */ #if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL) //#define PROBE_PT_1_X 15 - //#define PROBE_PT_1_Y 180 - //#define PROBE_PT_2_X 15 - //#define PROBE_PT_2_Y 20 - //#define PROBE_PT_3_X 170 - //#define PROBE_PT_3_Y 20 + //#define PROBE_PT_1_Y 10 + //#define PROBE_PT_2_X 90 + //#define PROBE_PT_2_Y 10 + //#define PROBE_PT_3_X 55 + //#define PROBE_PT_3_Y 100 #endif /** @@ -2050,7 +2052,7 @@ * * Override the default value based on the driver type set in Configuration.h. */ -//#define MINIMUM_STEPPER_PULSE 2 +#define MINIMUM_STEPPER_PULSE 0 /** * Maximum stepping rate (in Hz) the stepper driver allows @@ -2311,7 +2313,7 @@ * * Enable PARK_HEAD_ON_PAUSE to add the G-code M125 Pause and Park. */ -//#define ADVANCED_PAUSE_FEATURE +#define ADVANCED_PAUSE_FEATURE #if ENABLED(ADVANCED_PAUSE_FEATURE) #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. diff --git a/config/examples/Renkforce/RF100XL/Configuration.h b/config/examples/Renkforce/RF100XL/Configuration.h index 78c2dc9160..50405dd9f0 100644 --- a/config/examples/Renkforce/RF100XL/Configuration.h +++ b/config/examples/Renkforce/RF100XL/Configuration.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Renkforce/RF100XL" + /** * Configuration.h * @@ -127,7 +129,7 @@ * * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ -#define BAUDRATE 250000 +#define BAUDRATE 115200 // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH @@ -137,8 +139,11 @@ #define MOTHERBOARD BOARD_RAMPS_14_EFB #endif +#define FAN_PIN -1 +#define KILL_PIN 64 + // Name displayed in the LCD "Ready" message and Info menu -//#define CUSTOM_MACHINE_NAME "3D Printer" +#define CUSTOM_MACHINE_NAME "RF100 XL" // Printer's unique ID, used by some programs to differentiate between machines. // Choose your own or use a service like https://www.uuidgenerator.net/version4 @@ -424,7 +429,7 @@ #define TEMP_SENSOR_5 0 #define TEMP_SENSOR_6 0 #define TEMP_SENSOR_7 0 -#define TEMP_SENSOR_BED 0 +#define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 #define TEMP_SENSOR_COOLER 0 @@ -472,15 +477,15 @@ // Above this temperature the heater will be switched off. // This can protect components from overheating, but NOT from shorts and failures. // (Use MINTEMP for thermistor short/failure protection.) -#define HEATER_0_MAXTEMP 275 -#define HEATER_1_MAXTEMP 275 -#define HEATER_2_MAXTEMP 275 -#define HEATER_3_MAXTEMP 275 -#define HEATER_4_MAXTEMP 275 -#define HEATER_5_MAXTEMP 275 -#define HEATER_6_MAXTEMP 275 -#define HEATER_7_MAXTEMP 275 -#define BED_MAXTEMP 150 +#define HEATER_0_MAXTEMP 260 +#define HEATER_1_MAXTEMP 260 +#define HEATER_2_MAXTEMP 260 +#define HEATER_3_MAXTEMP 260 +#define HEATER_4_MAXTEMP 260 +#define HEATER_5_MAXTEMP 260 +#define HEATER_6_MAXTEMP 260 +#define HEATER_7_MAXTEMP 260 +#define BED_MAXTEMP 110 #define CHAMBER_MAXTEMP 60 /** @@ -506,20 +511,21 @@ #if ENABLED(PIDTEMP) //#define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) - //#define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) + #define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) // Set/get with gcode: M301 E[extruder number, 0-2] + // Renkforce RF100 #if ENABLED(PID_PARAMS_PER_HOTEND) // Specify between 1 and HOTENDS values per array. // If fewer than EXTRUDER values are provided, the last element will be repeated. - #define DEFAULT_Kp_LIST { 22.20, 22.20 } - #define DEFAULT_Ki_LIST { 1.08, 1.08 } - #define DEFAULT_Kd_LIST { 114.00, 114.00 } + #define DEFAULT_Kp_LIST { 19.0, 19.0 } + #define DEFAULT_Ki_LIST { 1.3, 1.3 } + #define DEFAULT_Kd_LIST { 70.1, 70.1 } #else - #define DEFAULT_Kp 22.20 - #define DEFAULT_Ki 1.08 - #define DEFAULT_Kd 114.00 + #define DEFAULT_Kp 19.0 + #define DEFAULT_Ki 1.3 + #define DEFAULT_Kd 70.1 #endif #endif // PIDTEMP @@ -684,10 +690,10 @@ // Almost all printers will be using one per axis. Probes will use one or more of the // extra connectors. Leave undefined any used for non-endstop and non-probe purposes. #define USE_XMIN_PLUG -#define USE_YMIN_PLUG +//#define USE_YMIN_PLUG #define USE_ZMIN_PLUG //#define USE_XMAX_PLUG -//#define USE_YMAX_PLUG +#define USE_YMAX_PLUG //#define USE_ZMAX_PLUG // Enable pullup for all endstops to prevent a floating state @@ -718,11 +724,11 @@ // Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). #define X_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. +#define Y_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. #define Z_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define X_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. +#define X_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. #define Y_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. +#define Z_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. #define Z_MIN_PROBE_ENDSTOP_INVERTING false // Set to true to invert the logic of the probe. /** @@ -806,14 +812,14 @@ * Override with M92 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 500 } +#define DEFAULT_AXIS_STEPS_PER_UNIT { 78.82, 78.82, 800, 116 } /** * Default Max Feed Rate (mm/s) * Override with M203 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 } +#define DEFAULT_MAX_FEEDRATE { 300, 300, 20, 25 } //#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 #if ENABLED(LIMITED_MAX_FR_EDITING) @@ -826,7 +832,7 @@ * Override with M201 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 } +#define DEFAULT_MAX_ACCELERATION { 500, 500, 100, 10000 } //#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 #if ENABLED(LIMITED_MAX_ACCEL_EDITING) @@ -841,9 +847,9 @@ * M204 R Retract Acceleration * M204 T Travel Acceleration */ -#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves +#define DEFAULT_ACCELERATION 500 // X, Y, Z and E acceleration for printing moves #define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves +#define DEFAULT_TRAVEL_ACCELERATION 500 // X, Y, Z acceleration for travel (non printing) moves /** * Default Jerk limits (mm/s) @@ -890,7 +896,7 @@ * * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained */ -//#define S_CURVE_ACCELERATION +#define S_CURVE_ACCELERATION //=========================================================================== //============================= Z Probe Options ============================= @@ -940,7 +946,7 @@ * Use G29 repeatedly, adjusting the Z height at each point with movement commands * or (with LCD_BED_LEVELING) the LCD controller. */ -//#define PROBE_MANUALLY +#define PROBE_MANUALLY /** * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. @@ -1192,12 +1198,12 @@ // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR false #define INVERT_Y_DIR true -#define INVERT_Z_DIR false +#define INVERT_Z_DIR true // @section extruder // For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR false +#define INVERT_E0_DIR true #define INVERT_E1_DIR false #define INVERT_E2_DIR false #define INVERT_E3_DIR false @@ -1218,7 +1224,7 @@ */ //#define Z_IDLE_HEIGHT Z_HOME_POS -//#define Z_HOMING_HEIGHT 4 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ... +#define Z_HOMING_HEIGHT 4 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ... // Be sure to have this much clearance over your Z_MAX_POS to prevent grinding. //#define Z_AFTER_HOMING 10 // (mm) Height to move to after homing Z @@ -1226,7 +1232,7 @@ // Direction of endstops when homing; 1=MAX, -1=MIN // :[-1,1] #define X_HOME_DIR -1 -#define Y_HOME_DIR -1 +#define Y_HOME_DIR 1 #define Z_HOME_DIR -1 // @section machine @@ -1385,7 +1391,7 @@ * leveling in steps so you can manually adjust the Z height at each grid-point. * With an LCD controller the process is guided step-by-step. */ -//#define AUTO_BED_LEVELING_3POINT +#define AUTO_BED_LEVELING_3POINT //#define AUTO_BED_LEVELING_LINEAR //#define AUTO_BED_LEVELING_BILINEAR //#define AUTO_BED_LEVELING_UBL @@ -1518,7 +1524,7 @@ * Add a bed leveling sub-menu for ABL or MBL. * Include a guided procedure if manual probing is enabled. */ -//#define LCD_BED_LEVELING +#define LCD_BED_LEVELING #if ENABLED(LCD_BED_LEVELING) #define MESH_EDIT_Z_STEP 0.025 // (mm) Step size while manually probing Z axis. @@ -1672,7 +1678,7 @@ * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) */ -//#define EEPROM_SETTINGS // Persistent storage with M500 and M501 +#define EEPROM_SETTINGS // Persistent storage with M500 and M501 //#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. #define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load @@ -1706,16 +1712,16 @@ // Preheat Constants - Up to 5 are supported without changes // #define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 180 +#define PREHEAT_1_TEMP_HOTEND 200 #define PREHEAT_1_TEMP_BED 70 #define PREHEAT_1_TEMP_CHAMBER 35 -#define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 +#define PREHEAT_1_FAN_SPEED 255 // Value from 0 to 255 #define PREHEAT_2_LABEL "ABS" -#define PREHEAT_2_TEMP_HOTEND 240 -#define PREHEAT_2_TEMP_BED 110 +#define PREHEAT_2_TEMP_HOTEND 230 +#define PREHEAT_2_TEMP_BED 100 #define PREHEAT_2_TEMP_CHAMBER 35 -#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 +#define PREHEAT_2_FAN_SPEED 255 // Value from 0 to 255 /** * Nozzle Park @@ -1728,7 +1734,7 @@ * P1 Raise the nozzle always to Z-park height. * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. */ -//#define NOZZLE_PARK_FEATURE +#define NOZZLE_PARK_FEATURE #if ENABLED(NOZZLE_PARK_FEATURE) // Specify a park position as { X, Y, Z_raise } @@ -1936,7 +1942,7 @@ * SD Card support is disabled by default. If your controller has an SD slot, * you must uncomment the following option or it won't work. */ -//#define SDSUPPORT +#define SDSUPPORT /** * SD CARD: ENABLE CRC @@ -1960,13 +1966,13 @@ // This option overrides the default number of encoder pulses needed to // produce one step. Should be increased for high-resolution encoders. // -//#define ENCODER_PULSES_PER_STEP 4 +#define ENCODER_PULSES_PER_STEP 4 // // Use this option to override the number of step signals required to // move between next/prev menu items. // -//#define ENCODER_STEPS_PER_MENU_ITEM 1 +#define ENCODER_STEPS_PER_MENU_ITEM 1 /** * Encoder Direction Options @@ -1983,7 +1989,7 @@ // // Set this option if CLOCKWISE causes values to DECREASE // -//#define REVERSE_ENCODER_DIRECTION +#define REVERSE_ENCODER_DIRECTION // // This option reverses the encoder direction for navigating LCD menus. @@ -2037,7 +2043,7 @@ // // Note: Usually sold with a white PCB. // -//#define REPRAP_DISCOUNT_SMART_CONTROLLER +#define REPRAP_DISCOUNT_SMART_CONTROLLER // // GT2560 (YHCB2004) LCD Display diff --git a/config/examples/Renkforce/RF100XL/Configuration_adv.h b/config/examples/Renkforce/RF100XL/Configuration_adv.h index 5335fa012a..0ff703a02d 100644 --- a/config/examples/Renkforce/RF100XL/Configuration_adv.h +++ b/config/examples/Renkforce/RF100XL/Configuration_adv.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Renkforce/RF100XL" + /** * Configuration_adv.h * @@ -540,7 +542,7 @@ * Multiple extruders can be assigned to the same pin in which case * the fan will turn on when any selected extruder is above the threshold. */ -#define E0_AUTO_FAN_PIN -1 +#define E0_AUTO_FAN_PIN 9 #define E1_AUTO_FAN_PIN -1 #define E2_AUTO_FAN_PIN -1 #define E3_AUTO_FAN_PIN -1 @@ -553,7 +555,7 @@ #define COOLER_FAN_PIN -1 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50 -#define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed +#define EXTRUDER_AUTO_FAN_SPEED 100 // 255 == full speed #define CHAMBER_AUTO_FAN_TEMPERATURE 30 #define CHAMBER_AUTO_FAN_SPEED 255 #define COOLER_AUTO_FAN_TEMPERATURE 18 @@ -867,7 +869,7 @@ // On a 300mm bed a 5% grade would give a misalignment of ~1.5cm #define G34_MAX_GRADE 5 // (%) Maximum incline that G34 will handle - #define Z_STEPPER_ALIGN_ITERATIONS 5 // Number of iterations to apply during alignment + #define Z_STEPPER_ALIGN_ITERATIONS 3 // Number of iterations to apply during alignment #define Z_STEPPER_ALIGN_ACC 0.02 // Stop iterating early if the accuracy is better than this #define RESTORE_LEVELING_AFTER_G34 // Restore leveling after G34 is done? // After G34, re-home Z (G28 Z) or just calculate it from the last probe heights? @@ -1059,7 +1061,7 @@ * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the * lowest stepping frequencies. */ -//#define ADAPTIVE_STEP_SMOOTHING +#define ADAPTIVE_STEP_SMOOTHING /** * Custom Microstepping @@ -1175,7 +1177,7 @@ #endif // Include a page of printer information in the LCD Main Menu - //#define LCD_INFO_MENU + #define LCD_INFO_MENU #if ENABLED(LCD_INFO_MENU) //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages #endif @@ -1229,7 +1231,7 @@ #endif // Scroll a longer status message into view - //#define STATUS_MESSAGE_SCROLLING + #define STATUS_MESSAGE_SCROLLING // On the Info Screen, display XY with one decimal place when possible //#define LCD_DECIMAL_SMALL_XY @@ -1384,7 +1386,7 @@ //#define LONG_FILENAME_HOST_SUPPORT // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES + #define SCROLL_LONG_FILENAMES // Leave the heaters on after Stop Print (not recommended!) //#define SD_ABORT_NO_COOLDOWN @@ -1798,7 +1800,7 @@ //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way //#define BABYSTEP_MILLIMETER_UNITS // Specify BABYSTEP_MULTIPLICATOR_(XY|Z) in mm instead of micro-steps - #define BABYSTEP_MULTIPLICATOR_Z 1 // (steps or mm) Steps or millimeter distance for each Z babystep + #define BABYSTEP_MULTIPLICATOR_Z 100 // (steps or mm) Steps or millimeter distance for each Z babystep #define BABYSTEP_MULTIPLICATOR_XY 1 // (steps or mm) Steps or millimeter distance for each XY babystep //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. @@ -1837,12 +1839,12 @@ * * See https://marlinfw.org/docs/features/lin_advance.html for full instructions. */ -//#define LIN_ADVANCE +#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) //#define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // If enabled, this will generate debug information output over USB. - //#define EXPERIMENTAL_SCURVE // Enable this option to permit S-Curve Acceleration + #define EXPERIMENTAL_SCURVE // Enable this option to permit S-Curve Acceleration #endif // @section leveling @@ -1853,11 +1855,11 @@ */ #if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL) //#define PROBE_PT_1_X 15 - //#define PROBE_PT_1_Y 180 - //#define PROBE_PT_2_X 15 - //#define PROBE_PT_2_Y 20 - //#define PROBE_PT_3_X 170 - //#define PROBE_PT_3_Y 20 + //#define PROBE_PT_1_Y 10 + //#define PROBE_PT_2_X 90 + //#define PROBE_PT_2_Y 10 + //#define PROBE_PT_3_X 55 + //#define PROBE_PT_3_Y 100 #endif /** @@ -2050,7 +2052,7 @@ * * Override the default value based on the driver type set in Configuration.h. */ -//#define MINIMUM_STEPPER_PULSE 2 +#define MINIMUM_STEPPER_PULSE 0 /** * Maximum stepping rate (in Hz) the stepper driver allows @@ -2311,7 +2313,7 @@ * * Enable PARK_HEAD_ON_PAUSE to add the G-code M125 Pause and Park. */ -//#define ADVANCED_PAUSE_FEATURE +#define ADVANCED_PAUSE_FEATURE #if ENABLED(ADVANCED_PAUSE_FEATURE) #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. diff --git a/config/examples/Renkforce/RF100v2/Configuration.h b/config/examples/Renkforce/RF100v2/Configuration.h index 78c2dc9160..d73265f8d3 100644 --- a/config/examples/Renkforce/RF100v2/Configuration.h +++ b/config/examples/Renkforce/RF100v2/Configuration.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Renkforce/RF100v2" + /** * Configuration.h * @@ -127,7 +129,7 @@ * * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ -#define BAUDRATE 250000 +#define BAUDRATE 115200 // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH @@ -137,8 +139,11 @@ #define MOTHERBOARD BOARD_RAMPS_14_EFB #endif +#define FAN_PIN -1 +#define KILL_PIN 64 + // Name displayed in the LCD "Ready" message and Info menu -//#define CUSTOM_MACHINE_NAME "3D Printer" +#define CUSTOM_MACHINE_NAME "RF100" // Printer's unique ID, used by some programs to differentiate between machines. // Choose your own or use a service like https://www.uuidgenerator.net/version4 @@ -472,15 +477,15 @@ // Above this temperature the heater will be switched off. // This can protect components from overheating, but NOT from shorts and failures. // (Use MINTEMP for thermistor short/failure protection.) -#define HEATER_0_MAXTEMP 275 -#define HEATER_1_MAXTEMP 275 -#define HEATER_2_MAXTEMP 275 -#define HEATER_3_MAXTEMP 275 -#define HEATER_4_MAXTEMP 275 -#define HEATER_5_MAXTEMP 275 -#define HEATER_6_MAXTEMP 275 -#define HEATER_7_MAXTEMP 275 -#define BED_MAXTEMP 150 +#define HEATER_0_MAXTEMP 260 +#define HEATER_1_MAXTEMP 260 +#define HEATER_2_MAXTEMP 260 +#define HEATER_3_MAXTEMP 260 +#define HEATER_4_MAXTEMP 260 +#define HEATER_5_MAXTEMP 260 +#define HEATER_6_MAXTEMP 260 +#define HEATER_7_MAXTEMP 260 +#define BED_MAXTEMP 110 #define CHAMBER_MAXTEMP 60 /** @@ -506,20 +511,21 @@ #if ENABLED(PIDTEMP) //#define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) - //#define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) + #define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) // Set/get with gcode: M301 E[extruder number, 0-2] + // Renkforce RF100 #if ENABLED(PID_PARAMS_PER_HOTEND) // Specify between 1 and HOTENDS values per array. // If fewer than EXTRUDER values are provided, the last element will be repeated. - #define DEFAULT_Kp_LIST { 22.20, 22.20 } - #define DEFAULT_Ki_LIST { 1.08, 1.08 } - #define DEFAULT_Kd_LIST { 114.00, 114.00 } + #define DEFAULT_Kp_LIST { 19.0, 19.0 } + #define DEFAULT_Ki_LIST { 1.3, 1.3 } + #define DEFAULT_Kd_LIST { 70.1, 70.1 } #else - #define DEFAULT_Kp 22.20 - #define DEFAULT_Ki 1.08 - #define DEFAULT_Kd 114.00 + #define DEFAULT_Kp 19.0 + #define DEFAULT_Ki 1.3 + #define DEFAULT_Kd 70.1 #endif #endif // PIDTEMP @@ -684,10 +690,10 @@ // Almost all printers will be using one per axis. Probes will use one or more of the // extra connectors. Leave undefined any used for non-endstop and non-probe purposes. #define USE_XMIN_PLUG -#define USE_YMIN_PLUG +//#define USE_YMIN_PLUG #define USE_ZMIN_PLUG //#define USE_XMAX_PLUG -//#define USE_YMAX_PLUG +#define USE_YMAX_PLUG //#define USE_ZMAX_PLUG // Enable pullup for all endstops to prevent a floating state @@ -718,11 +724,11 @@ // Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). #define X_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. +#define Y_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. #define Z_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define X_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. +#define X_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. #define Y_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. +#define Z_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. #define Z_MIN_PROBE_ENDSTOP_INVERTING false // Set to true to invert the logic of the probe. /** @@ -806,14 +812,14 @@ * Override with M92 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 500 } +#define DEFAULT_AXIS_STEPS_PER_UNIT { 78.82, 78.82, 800, 116 } /** * Default Max Feed Rate (mm/s) * Override with M203 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 } +#define DEFAULT_MAX_FEEDRATE { 300, 300, 20, 25 } //#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 #if ENABLED(LIMITED_MAX_FR_EDITING) @@ -826,7 +832,7 @@ * Override with M201 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 } +#define DEFAULT_MAX_ACCELERATION { 500, 500, 100, 10000 } //#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 #if ENABLED(LIMITED_MAX_ACCEL_EDITING) @@ -841,9 +847,9 @@ * M204 R Retract Acceleration * M204 T Travel Acceleration */ -#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves +#define DEFAULT_ACCELERATION 500 // X, Y, Z and E acceleration for printing moves #define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves +#define DEFAULT_TRAVEL_ACCELERATION 500 // X, Y, Z acceleration for travel (non printing) moves /** * Default Jerk limits (mm/s) @@ -890,7 +896,7 @@ * * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained */ -//#define S_CURVE_ACCELERATION +#define S_CURVE_ACCELERATION //=========================================================================== //============================= Z Probe Options ============================= @@ -940,7 +946,7 @@ * Use G29 repeatedly, adjusting the Z height at each point with movement commands * or (with LCD_BED_LEVELING) the LCD controller. */ -//#define PROBE_MANUALLY +#define PROBE_MANUALLY /** * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. @@ -1192,12 +1198,12 @@ // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR false #define INVERT_Y_DIR true -#define INVERT_Z_DIR false +#define INVERT_Z_DIR true // @section extruder // For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR false +#define INVERT_E0_DIR true #define INVERT_E1_DIR false #define INVERT_E2_DIR false #define INVERT_E3_DIR false @@ -1218,7 +1224,7 @@ */ //#define Z_IDLE_HEIGHT Z_HOME_POS -//#define Z_HOMING_HEIGHT 4 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ... +#define Z_HOMING_HEIGHT 4 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ... // Be sure to have this much clearance over your Z_MAX_POS to prevent grinding. //#define Z_AFTER_HOMING 10 // (mm) Height to move to after homing Z @@ -1226,14 +1232,14 @@ // Direction of endstops when homing; 1=MAX, -1=MIN // :[-1,1] #define X_HOME_DIR -1 -#define Y_HOME_DIR -1 +#define Y_HOME_DIR 1 #define Z_HOME_DIR -1 // @section machine // The size of the printable area -#define X_BED_SIZE 200 -#define Y_BED_SIZE 200 +#define X_BED_SIZE 120 +#define Y_BED_SIZE 120 // Travel limits (mm) after homing, corresponding to endstop positions. #define X_MIN_POS 0 @@ -1241,7 +1247,7 @@ #define Z_MIN_POS 0 #define X_MAX_POS X_BED_SIZE #define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 200 +#define Z_MAX_POS 120 /** * Software Endstops @@ -1385,7 +1391,7 @@ * leveling in steps so you can manually adjust the Z height at each grid-point. * With an LCD controller the process is guided step-by-step. */ -//#define AUTO_BED_LEVELING_3POINT +#define AUTO_BED_LEVELING_3POINT //#define AUTO_BED_LEVELING_LINEAR //#define AUTO_BED_LEVELING_BILINEAR //#define AUTO_BED_LEVELING_UBL @@ -1518,7 +1524,7 @@ * Add a bed leveling sub-menu for ABL or MBL. * Include a guided procedure if manual probing is enabled. */ -//#define LCD_BED_LEVELING +#define LCD_BED_LEVELING #if ENABLED(LCD_BED_LEVELING) #define MESH_EDIT_Z_STEP 0.025 // (mm) Step size while manually probing Z axis. @@ -1672,7 +1678,7 @@ * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) */ -//#define EEPROM_SETTINGS // Persistent storage with M500 and M501 +#define EEPROM_SETTINGS // Persistent storage with M500 and M501 //#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. #define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load @@ -1706,16 +1712,16 @@ // Preheat Constants - Up to 5 are supported without changes // #define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 180 +#define PREHEAT_1_TEMP_HOTEND 200 #define PREHEAT_1_TEMP_BED 70 #define PREHEAT_1_TEMP_CHAMBER 35 -#define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 +#define PREHEAT_1_FAN_SPEED 255 // Value from 0 to 255 #define PREHEAT_2_LABEL "ABS" -#define PREHEAT_2_TEMP_HOTEND 240 +#define PREHEAT_2_TEMP_HOTEND 230 #define PREHEAT_2_TEMP_BED 110 #define PREHEAT_2_TEMP_CHAMBER 35 -#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 +#define PREHEAT_2_FAN_SPEED 255 // Value from 0 to 255 /** * Nozzle Park @@ -1728,7 +1734,7 @@ * P1 Raise the nozzle always to Z-park height. * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. */ -//#define NOZZLE_PARK_FEATURE +#define NOZZLE_PARK_FEATURE #if ENABLED(NOZZLE_PARK_FEATURE) // Specify a park position as { X, Y, Z_raise } @@ -1936,7 +1942,7 @@ * SD Card support is disabled by default. If your controller has an SD slot, * you must uncomment the following option or it won't work. */ -//#define SDSUPPORT +#define SDSUPPORT /** * SD CARD: ENABLE CRC @@ -1960,13 +1966,13 @@ // This option overrides the default number of encoder pulses needed to // produce one step. Should be increased for high-resolution encoders. // -//#define ENCODER_PULSES_PER_STEP 4 +#define ENCODER_PULSES_PER_STEP 4 // // Use this option to override the number of step signals required to // move between next/prev menu items. // -//#define ENCODER_STEPS_PER_MENU_ITEM 1 +#define ENCODER_STEPS_PER_MENU_ITEM 1 /** * Encoder Direction Options @@ -1983,7 +1989,7 @@ // // Set this option if CLOCKWISE causes values to DECREASE // -//#define REVERSE_ENCODER_DIRECTION +#define REVERSE_ENCODER_DIRECTION // // This option reverses the encoder direction for navigating LCD menus. @@ -2037,7 +2043,7 @@ // // Note: Usually sold with a white PCB. // -//#define REPRAP_DISCOUNT_SMART_CONTROLLER +#define REPRAP_DISCOUNT_SMART_CONTROLLER // // GT2560 (YHCB2004) LCD Display diff --git a/config/examples/Renkforce/RF100v2/Configuration_adv.h b/config/examples/Renkforce/RF100v2/Configuration_adv.h index 5335fa012a..00b6074ee2 100644 --- a/config/examples/Renkforce/RF100v2/Configuration_adv.h +++ b/config/examples/Renkforce/RF100v2/Configuration_adv.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Renkforce/RF100v2" + /** * Configuration_adv.h * @@ -540,7 +542,7 @@ * Multiple extruders can be assigned to the same pin in which case * the fan will turn on when any selected extruder is above the threshold. */ -#define E0_AUTO_FAN_PIN -1 +#define E0_AUTO_FAN_PIN 9 #define E1_AUTO_FAN_PIN -1 #define E2_AUTO_FAN_PIN -1 #define E3_AUTO_FAN_PIN -1 @@ -553,7 +555,7 @@ #define COOLER_FAN_PIN -1 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50 -#define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed +#define EXTRUDER_AUTO_FAN_SPEED 100 // 255 == full speed #define CHAMBER_AUTO_FAN_TEMPERATURE 30 #define CHAMBER_AUTO_FAN_SPEED 255 #define COOLER_AUTO_FAN_TEMPERATURE 18 @@ -867,7 +869,7 @@ // On a 300mm bed a 5% grade would give a misalignment of ~1.5cm #define G34_MAX_GRADE 5 // (%) Maximum incline that G34 will handle - #define Z_STEPPER_ALIGN_ITERATIONS 5 // Number of iterations to apply during alignment + #define Z_STEPPER_ALIGN_ITERATIONS 3 // Number of iterations to apply during alignment #define Z_STEPPER_ALIGN_ACC 0.02 // Stop iterating early if the accuracy is better than this #define RESTORE_LEVELING_AFTER_G34 // Restore leveling after G34 is done? // After G34, re-home Z (G28 Z) or just calculate it from the last probe heights? @@ -1059,7 +1061,7 @@ * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the * lowest stepping frequencies. */ -//#define ADAPTIVE_STEP_SMOOTHING +#define ADAPTIVE_STEP_SMOOTHING /** * Custom Microstepping @@ -1175,7 +1177,7 @@ #endif // Include a page of printer information in the LCD Main Menu - //#define LCD_INFO_MENU + #define LCD_INFO_MENU #if ENABLED(LCD_INFO_MENU) //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages #endif @@ -1229,7 +1231,7 @@ #endif // Scroll a longer status message into view - //#define STATUS_MESSAGE_SCROLLING + #define STATUS_MESSAGE_SCROLLING // On the Info Screen, display XY with one decimal place when possible //#define LCD_DECIMAL_SMALL_XY @@ -1384,7 +1386,7 @@ //#define LONG_FILENAME_HOST_SUPPORT // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES + #define SCROLL_LONG_FILENAMES // Leave the heaters on after Stop Print (not recommended!) //#define SD_ABORT_NO_COOLDOWN @@ -1798,7 +1800,7 @@ //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way //#define BABYSTEP_MILLIMETER_UNITS // Specify BABYSTEP_MULTIPLICATOR_(XY|Z) in mm instead of micro-steps - #define BABYSTEP_MULTIPLICATOR_Z 1 // (steps or mm) Steps or millimeter distance for each Z babystep + #define BABYSTEP_MULTIPLICATOR_Z 100 // (steps or mm) Steps or millimeter distance for each Z babystep #define BABYSTEP_MULTIPLICATOR_XY 1 // (steps or mm) Steps or millimeter distance for each XY babystep //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. @@ -1837,12 +1839,12 @@ * * See https://marlinfw.org/docs/features/lin_advance.html for full instructions. */ -//#define LIN_ADVANCE +#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) //#define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // If enabled, this will generate debug information output over USB. - //#define EXPERIMENTAL_SCURVE // Enable this option to permit S-Curve Acceleration + #define EXPERIMENTAL_SCURVE // Enable this option to permit S-Curve Acceleration #endif // @section leveling @@ -1853,11 +1855,11 @@ */ #if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL) //#define PROBE_PT_1_X 15 - //#define PROBE_PT_1_Y 180 - //#define PROBE_PT_2_X 15 - //#define PROBE_PT_2_Y 20 - //#define PROBE_PT_3_X 170 - //#define PROBE_PT_3_Y 20 + //#define PROBE_PT_1_Y 10 + //#define PROBE_PT_2_X 90 + //#define PROBE_PT_2_Y 10 + //#define PROBE_PT_3_X 55 + //#define PROBE_PT_3_Y 100 #endif /** @@ -2050,7 +2052,7 @@ * * Override the default value based on the driver type set in Configuration.h. */ -//#define MINIMUM_STEPPER_PULSE 2 +#define MINIMUM_STEPPER_PULSE 0 /** * Maximum stepping rate (in Hz) the stepper driver allows @@ -2311,7 +2313,7 @@ * * Enable PARK_HEAD_ON_PAUSE to add the G-code M125 Pause and Park. */ -//#define ADVANCED_PAUSE_FEATURE +#define ADVANCED_PAUSE_FEATURE #if ENABLED(ADVANCED_PAUSE_FEATURE) #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. diff --git a/config/examples/RepRapPro/Huxley/Configuration.h b/config/examples/RepRapPro/Huxley/Configuration.h index 78c2dc9160..b278de8599 100644 --- a/config/examples/RepRapPro/Huxley/Configuration.h +++ b/config/examples/RepRapPro/Huxley/Configuration.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "RepRapPro/Huxley" + /** * Configuration.h * @@ -69,7 +71,7 @@ // @section info // Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes. +#define STRING_CONFIG_H_AUTHOR "(indazoo, Huxley v1)" // Who made the changes. //#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) /** @@ -134,11 +136,11 @@ // Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_RAMPS_14_EFB + #define MOTHERBOARD BOARD_SANGUINOLOLU_12 #endif // Name displayed in the LCD "Ready" message and Info menu -//#define CUSTOM_MACHINE_NAME "3D Printer" +#define CUSTOM_MACHINE_NAME "Huxley" // Printer's unique ID, used by some programs to differentiate between machines. // Choose your own or use a service like https://www.uuidgenerator.net/version4 @@ -424,7 +426,7 @@ #define TEMP_SENSOR_5 0 #define TEMP_SENSOR_6 0 #define TEMP_SENSOR_7 0 -#define TEMP_SENSOR_BED 0 +#define TEMP_SENSOR_BED 1 // Sanguinololu v1.3 with 4.7kOhm pullup #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 #define TEMP_SENSOR_COOLER 0 @@ -794,6 +796,46 @@ * Note that if EEPROM is enabled, saved values will override these. */ +// +// Standard NEMA 17 with T2 belt and 20 tooth pulley +// +#define NEMA17_FULL_STEPS 200.0 +#define TEMP_XY_MICROSTEPS 16.0 +#define TEMP_E_MICROSTEPS 16.0 +#define TEMP_Z_MICROSTEPS 16.0 + +/** + * RepRapPro belts + * http://forums.reprap.org/read.php?1,391198 + * White polyurethane belt(T2.5), 14 - tooth printed pulley : 91.4286 step per mm (Original Huxley, Legacy Mendel) + * Black rubber belt(MXL), 17 - tooth printed pulley : 92.635 step per mm (Huxley, Mendel Mono and Tri since 1 / 4 / 2013) + * Black rubber belt(MXL), 18 - tooth aluminium pulley : 87.489 step per mm (Huxley, Mendel Mono and Tri since 1 / 1 / 2014) + */ +#define XY_PULLEY_PITCH 2.5 // RepRapPro Huxley has T2.5 belts +#define XY_PULLEY_TEETH 14.0 // RepRapPro Huxley has 14 teeth pulleys + +// +// Standard NEMA 17 with fancy 5mm lead screws +// +#define Z_RODS_PITCH 0.8 + +#define XY_MOTOR_STEPS (NEMA17_FULL_STEPS * TEMP_XY_MICROSTEPS) +#define Z_MOTOR_STEPS (NEMA17_FULL_STEPS * TEMP_Z_MICROSTEPS) +#define E_MOTOR_STEPS (NEMA17_FULL_STEPS * TEMP_E_MICROSTEPS) + +// +// MK7 Direct Drive +// +#define E_MOTOR_GEAR_TEETH 11.0 // Num of teeth of gear on extruder motor +#define E_ROD_GEAR_TEETH 53.0 // Num of teeth of gear driving the extruder rod +#define E_ROD_DIAM 5.4 // ca value. M6 rod drives the filament. Manual calibration needed. +#define E_ROD_CIRC (M_PI * E_ROD_DIAM) +#define E_STEPS (E_MOTOR_STEPS / (E_MOTOR_GEAR_TEETH/E_ROD_GEAR_TEETH) / E_ROD_CIRC) + +// Get steps/mm from selected results above +#define XY_STEPS (XY_MOTOR_STEPS / (XY_PULLEY_PITCH * XY_PULLEY_TEETH)) +#define Z_STEPS (Z_MOTOR_STEPS / Z_RODS_PITCH) + /** * With this option each E stepper can have its own factors for the * following movement settings. If fewer factors are given than the @@ -806,14 +848,15 @@ * Override with M92 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 500 } +#define DEFAULT_AXIS_STEPS_PER_UNIT { XY_STEPS, XY_STEPS, Z_STEPS, E_STEPS } /** * Default Max Feed Rate (mm/s) * Override with M203 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 } +#define DEFAULT_MAX_Z_FEEDRATE 3.3 // older Huxley has problem with speeds > 3.3 mm/s on Z axis +#define DEFAULT_MAX_FEEDRATE { 200, 200, DEFAULT_MAX_Z_FEEDRATE, 25 } //#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 #if ENABLED(LIMITED_MAX_FR_EDITING) @@ -826,7 +869,7 @@ * Override with M201 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 } +#define DEFAULT_MAX_ACCELERATION { 1000, 1000, 50, 1000 } //#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 #if ENABLED(LIMITED_MAX_ACCEL_EDITING) @@ -841,9 +884,9 @@ * M204 R Retract Acceleration * M204 T Travel Acceleration */ -#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves +#define DEFAULT_ACCELERATION 1000 // X, Y, Z and E acceleration for printing moves +#define DEFAULT_RETRACT_ACCELERATION 1000 // E acceleration for retracts +#define DEFAULT_TRAVEL_ACCELERATION 1000 // X, Y, Z acceleration for travel (non printing) moves /** * Default Jerk limits (mm/s) @@ -877,7 +920,7 @@ * https://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html */ #if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.013 // (mm) Distance from real junction edge + #define JUNCTION_DEVIATION_MM 0.04 // (mm) Distance from real junction edge #define JD_HANDLE_SMALL_SEGMENTS // Use curvature estimation instead of just the junction angle // for small segments (< 1mm) with large junction angles (> 135°). #endif @@ -1065,7 +1108,7 @@ #define XY_PROBE_FEEDRATE (133*60) // Feedrate (mm/min) for the first approach when double-probing (MULTIPLE_PROBING == 2) -#define Z_PROBE_FEEDRATE_FAST (4*60) +#define Z_PROBE_FEEDRATE_FAST (DEFAULT_MAX_Z_FEEDRATE*60) // Feedrate (mm/min) for the "accurate" probe of each point #define Z_PROBE_FEEDRATE_SLOW (Z_PROBE_FEEDRATE_FAST / 2) @@ -1190,14 +1233,14 @@ // @section machine // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR false -#define INVERT_Y_DIR true +#define INVERT_X_DIR true +#define INVERT_Y_DIR false #define INVERT_Z_DIR false // @section extruder // For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR false +#define INVERT_E0_DIR true #define INVERT_E1_DIR false #define INVERT_E2_DIR false #define INVERT_E3_DIR false @@ -1232,16 +1275,25 @@ // @section machine // The size of the printable area -#define X_BED_SIZE 200 -#define Y_BED_SIZE 200 +// https://reprap.org/wiki/Configuring_Marlin_Bed_Dimensions +// https://marlinfw.org/docs/configuration/configuration.html#movement-bounds +#define X_BED_SIZE 140 +#define Y_BED_SIZE 140 +// Huxley with 110x110 PEI board. +//#define X_BED_SIZE 108 +//#define Y_BED_SIZE 108 // Travel limits (mm) after homing, corresponding to endstop positions. -#define X_MIN_POS 0 -#define Y_MIN_POS 0 +#define X_MIN_POS -9 +#define Y_MIN_POS -5 +// Huxley with 110x110 PEI board. +//#define X_MIN_POS -25 +//#define Y_MIN_POS -21 #define Z_MIN_POS 0 + #define X_MAX_POS X_BED_SIZE #define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 200 +#define Z_MAX_POS 80 /** * Software Endstops @@ -1595,7 +1647,7 @@ #endif // Homing speeds (mm/min) -#define HOMING_FEEDRATE_MM_M { (50*60), (50*60), (4*60) } +#define HOMING_FEEDRATE_MM_M { (50*60), (50*60), (DEFAULT_MAX_Z_FEEDRATE*60) } // Validate that endstops are triggered on homing moves #define VALIDATE_HOMING_ENDSTOPS @@ -1672,7 +1724,7 @@ * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) */ -//#define EEPROM_SETTINGS // Persistent storage with M500 and M501 +#define EEPROM_SETTINGS // Persistent storage with M500 and M501 //#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. #define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load @@ -1736,8 +1788,8 @@ //#define NOZZLE_PARK_X_ONLY // X move only is required to park //#define NOZZLE_PARK_Y_ONLY // Y move only is required to park #define NOZZLE_PARK_Z_RAISE_MIN 2 // (mm) Always raise Z by at least this distance - #define NOZZLE_PARK_XY_FEEDRATE 100 // (mm/s) X and Y axes feedrate (also used for delta Z axis) - #define NOZZLE_PARK_Z_FEEDRATE 5 // (mm/s) Z axis feedrate (not used for delta printers) + #define NOZZLE_PARK_XY_FEEDRATE 100 // (mm/s) X and Y axes feedrate (also used for delta Z axis) + #define NOZZLE_PARK_Z_FEEDRATE DEFAULT_MAX_Z_FEEDRATE // (mm/s) Z axis feedrate (not used for delta printers) #endif /** diff --git a/config/examples/RepRapWorld/Megatronics/Configuration.h b/config/examples/RepRapWorld/Megatronics/Configuration.h index 78c2dc9160..74502c820c 100644 --- a/config/examples/RepRapWorld/Megatronics/Configuration.h +++ b/config/examples/RepRapWorld/Megatronics/Configuration.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "RepRapWorld/Megatronics" + /** * Configuration.h * @@ -69,7 +71,7 @@ // @section info // Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes. +#define STRING_CONFIG_H_AUTHOR "RepRapWorld.com" // Who made the changes. //#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) /** @@ -127,14 +129,14 @@ * * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ -#define BAUDRATE 250000 +#define BAUDRATE 115200 // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH // Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_RAMPS_14_EFB + #define MOTHERBOARD BOARD_MEGATRONICS_3 #endif // Name displayed in the LCD "Ready" message and Info menu @@ -318,7 +320,7 @@ * Enable and connect the power supply to the PS_ON_PIN. * Specify whether the power supply is active HIGH or active LOW. */ -//#define PSU_CONTROL +#define PSU_CONTROL //#define PSU_NAME "Power Supply" #if ENABLED(PSU_CONTROL) @@ -424,7 +426,7 @@ #define TEMP_SENSOR_5 0 #define TEMP_SENSOR_6 0 #define TEMP_SENSOR_7 0 -#define TEMP_SENSOR_BED 0 +#define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 #define TEMP_SENSOR_COOLER 0 @@ -448,7 +450,7 @@ #define TEMP_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer #define TEMP_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target -#define TEMP_BED_RESIDENCY_TIME 10 // (seconds) Time to wait for bed to "settle" in M190 +#define TEMP_BED_RESIDENCY_TIME 0 // (seconds) Time to wait for bed to "settle" in M190 #define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer #define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target @@ -717,13 +719,13 @@ #endif // Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define X_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_PROBE_ENDSTOP_INVERTING false // Set to true to invert the logic of the probe. +#define X_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Y_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Z_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define X_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Y_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Z_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Z_MIN_PROBE_ENDSTOP_INVERTING true // Set to true to invert the logic of the probe. /** * Stepper Drivers @@ -806,7 +808,7 @@ * Override with M92 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 500 } +#define DEFAULT_AXIS_STEPS_PER_UNIT { 78.7402*2, 78.7402*2, 5120.00, 760*1*1.5 } /** * Default Max Feed Rate (mm/s) @@ -1055,7 +1057,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +#define NOZZLE_TO_PROBE_OFFSET { -25, -29, -12.35 } // Most probes should stay away from the edges of the bed, but // with NOZZLE_AS_PROBE this can be negative for a wider probing area. @@ -1123,7 +1125,7 @@ * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. */ -#define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow +#define Z_CLEARANCE_DEPLOY_PROBE 15 // Z Clearance for Deploy/Stow #define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points #define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes //#define Z_AFTER_PROBING 5 // Z position after probing is done @@ -1936,14 +1938,14 @@ * SD Card support is disabled by default. If your controller has an SD slot, * you must uncomment the following option or it won't work. */ -//#define SDSUPPORT +#define SDSUPPORT /** * SD CARD: ENABLE CRC * * Use CRC checks and retries on the SD communication. */ -//#define SD_CHECK_AND_RETRY +#define SD_CHECK_AND_RETRY /** * LCD Menu Items @@ -2100,7 +2102,7 @@ // // Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD. // -//#define ULTRA_LCD +#define ULTRA_LCD //============================================================================= //======================== LCD / Controller Selection ========================= @@ -2599,8 +2601,8 @@ // RepRapWorld REPRAPWORLD_KEYPAD v1.1 // https://reprapworld.com/products/electronics/ramps/keypad_v1_0_fully_assembled/ // -//#define REPRAPWORLD_KEYPAD -//#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 // (mm) Distance to move per key-press +#define REPRAPWORLD_KEYPAD +#define REPRAPWORLD_KEYPAD_MOVE_STEP 1.0 // (mm) Distance to move per key-press //============================================================================= //=============================== Extra Features ============================== diff --git a/config/examples/RigidBot/Configuration.h b/config/examples/RigidBot/Configuration.h index 78c2dc9160..c6afe736dd 100644 --- a/config/examples/RigidBot/Configuration.h +++ b/config/examples/RigidBot/Configuration.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "RigidBot" + /** * Configuration.h * @@ -69,7 +71,7 @@ // @section info // Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes. +#define STRING_CONFIG_H_AUTHOR "(none, RigidBot)" // Who made the changes. //#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) /** @@ -127,18 +129,21 @@ * * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ -#define BAUDRATE 250000 +#define BAUDRATE 115200 // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH // Choose the name from boards.h that matches your setup +// for Rigidbot version 1 : #define MOTHERBOARD BOARD_RIGIDBOARD +// for Rigidbot Version 2 : #define MOTHERBOARD BOARD_RIGIDBOARD_V2 + #ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_RAMPS_14_EFB + #define MOTHERBOARD BOARD_RIGIDBOARD_V2 #endif // Name displayed in the LCD "Ready" message and Info menu -//#define CUSTOM_MACHINE_NAME "3D Printer" +#define CUSTOM_MACHINE_NAME "Rigidbot" // Printer's unique ID, used by some programs to differentiate between machines. // Choose your own or use a service like https://www.uuidgenerator.net/version4 @@ -148,7 +153,7 @@ // This defines the number of extruders // :[0, 1, 2, 3, 4, 5, 6, 7, 8] -#define EXTRUDERS 1 +#define EXTRUDERS 1 // Single extruder. Set to 2 for dual extruders // Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc. #define DEFAULT_NOMINAL_FILAMENT_DIA 1.75 @@ -416,7 +421,7 @@ * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. */ -#define TEMP_SENSOR_0 1 +#define TEMP_SENSOR_0 1 // DGlass3D = 5; RigidBot = 1; 3DSv6 = 5 #define TEMP_SENSOR_1 0 #define TEMP_SENSOR_2 0 #define TEMP_SENSOR_3 0 @@ -424,7 +429,7 @@ #define TEMP_SENSOR_5 0 #define TEMP_SENSOR_6 0 #define TEMP_SENSOR_7 0 -#define TEMP_SENSOR_BED 0 +#define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 #define TEMP_SENSOR_COOLER 0 @@ -442,13 +447,13 @@ // Use temp sensor 1 as a redundant sensor with sensor 0. If the readings // from the two sensors differ too much the print will be aborted. //#define TEMP_SENSOR_1_AS_REDUNDANT -#define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10 +//#define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10 #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 #define TEMP_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer #define TEMP_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target -#define TEMP_BED_RESIDENCY_TIME 10 // (seconds) Time to wait for bed to "settle" in M190 +#define TEMP_BED_RESIDENCY_TIME 0 // (seconds) Time to wait for bed to "settle" in M190 #define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer #define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target @@ -513,13 +518,24 @@ #if ENABLED(PID_PARAMS_PER_HOTEND) // Specify between 1 and HOTENDS values per array. // If fewer than EXTRUDER values are provided, the last element will be repeated. - #define DEFAULT_Kp_LIST { 22.20, 22.20 } - #define DEFAULT_Ki_LIST { 1.08, 1.08 } - #define DEFAULT_Kd_LIST { 114.00, 114.00 } + #define DEFAULT_Kp_LIST { 16.17, 16.17 } + #define DEFAULT_Ki_LIST { 0.85, 0.85 } + #define DEFAULT_Kd_LIST { 76.55, 76.55 } #else - #define DEFAULT_Kp 22.20 - #define DEFAULT_Ki 1.08 - #define DEFAULT_Kd 114.00 + // Rigidbot hotend + #define DEFAULT_Kp 16.17 + #define DEFAULT_Ki 0.85 + #define DEFAULT_Kd 76.55 + + // Base DGlass3D/E3Dv6 hotend + //#define DEFAULT_Kp 10 + //#define DEFAULT_Ki 0.85 + //#define DEFAULT_Kd 245 + + // E3D w/ rigidbot cartridge + //#define DEFAULT_Kp 16.30 + //#define DEFAULT_Ki 0.95 + //#define DEFAULT_Kd 69.69 #endif #endif // PIDTEMP @@ -556,11 +572,10 @@ //#define MIN_BED_POWER 0 //#define PID_BED_DEBUG // Sends debug data to the serial port. - // 120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - // from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) - #define DEFAULT_bedKp 10.00 - #define DEFAULT_bedKi .023 - #define DEFAULT_bedKd 305.4 + // RigidBot, from pid autotune + #define DEFAULT_bedKp 355 + #define DEFAULT_bedKi 66.5 + #define DEFAULT_bedKd 480 // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. #endif // PIDTEMPBED @@ -717,13 +732,13 @@ #endif // Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define X_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_PROBE_ENDSTOP_INVERTING false // Set to true to invert the logic of the probe. +#define X_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Y_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Z_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define X_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Y_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Z_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Z_MIN_PROBE_ENDSTOP_INVERTING true // Set to true to invert the logic of the probe. /** * Stepper Drivers @@ -806,14 +821,16 @@ * Override with M92 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 500 } + // default steps per unit for RigidBot with standard hardware +#define DEFAULT_AXIS_STEPS_PER_UNIT { 44.3090, 22.1545, 1600, 53.5 } +// default steps for 16-tooth pulleys { 100.06, 50.06, 1600, 76 } // HPX2-MAX E=504, RigidBot E=53.5, Peter Stoneham's=76 /** * Default Max Feed Rate (mm/s) * Override with M203 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 } +#define DEFAULT_MAX_FEEDRATE { 500, 500, 5, 25 } //#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 #if ENABLED(LIMITED_MAX_FR_EDITING) @@ -826,7 +843,7 @@ * Override with M201 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 } +#define DEFAULT_MAX_ACCELERATION { 800, 800, 100, 10000 } //#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 #if ENABLED(LIMITED_MAX_ACCEL_EDITING) @@ -841,8 +858,8 @@ * M204 R Retract Acceleration * M204 T Travel Acceleration */ -#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts +#define DEFAULT_ACCELERATION 600 // X, Y, Z and E acceleration for printing moves +#define DEFAULT_RETRACT_ACCELERATION 1000 // E acceleration for retracts #define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves /** @@ -855,8 +872,8 @@ */ //#define CLASSIC_JERK #if ENABLED(CLASSIC_JERK) - #define DEFAULT_XJERK 10.0 - #define DEFAULT_YJERK 10.0 + #define DEFAULT_XJERK 8.0 + #define DEFAULT_YJERK 8.0 #define DEFAULT_ZJERK 0.3 //#define TRAVEL_EXTRA_XYJERK 0.0 // Additional jerk allowance for all travel moves @@ -877,7 +894,7 @@ * https://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html */ #if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.013 // (mm) Distance from real junction edge + #define JUNCTION_DEVIATION_MM 0.043 // (mm) Distance from real junction edge #define JD_HANDLE_SMALL_SEGMENTS // Use curvature estimation instead of just the junction angle // for small segments (< 1mm) with large junction angles (> 135°). #endif @@ -1055,7 +1072,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +#define NOZZLE_TO_PROBE_OFFSET { -25, -29, -12.35 } // Most probes should stay away from the edges of the bed, but // with NOZZLE_AS_PROBE this can be negative for a wider probing area. @@ -1065,7 +1082,7 @@ #define XY_PROBE_FEEDRATE (133*60) // Feedrate (mm/min) for the first approach when double-probing (MULTIPLE_PROBING == 2) -#define Z_PROBE_FEEDRATE_FAST (4*60) +#define Z_PROBE_FEEDRATE_FAST (15*60) // Feedrate (mm/min) for the "accurate" probe of each point #define Z_PROBE_FEEDRATE_SLOW (Z_PROBE_FEEDRATE_FAST / 2) @@ -1123,7 +1140,7 @@ * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. */ -#define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow +#define Z_CLEARANCE_DEPLOY_PROBE 15 // Z Clearance for Deploy/Stow #define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points #define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes //#define Z_AFTER_PROBING 5 // Z position after probing is done @@ -1190,15 +1207,15 @@ // @section machine // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR false -#define INVERT_Y_DIR true +#define INVERT_X_DIR true +#define INVERT_Y_DIR false #define INVERT_Z_DIR false // @section extruder // For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR false -#define INVERT_E1_DIR false +#define INVERT_E0_DIR true +#define INVERT_E1_DIR true #define INVERT_E2_DIR false #define INVERT_E3_DIR false #define INVERT_E4_DIR false @@ -1232,8 +1249,8 @@ // @section machine // The size of the printable area -#define X_BED_SIZE 200 -#define Y_BED_SIZE 200 +#define X_BED_SIZE 254 // RigidBot regular is 254mm, RigitBot Big is 406mm +#define Y_BED_SIZE 248 // RigidBot regular is 248mm, RigitBot Big is 304mm // Travel limits (mm) after homing, corresponding to endstop positions. #define X_MIN_POS 0 @@ -1241,7 +1258,7 @@ #define Z_MIN_POS 0 #define X_MAX_POS X_BED_SIZE #define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 200 +#define Z_MAX_POS 254 // RigidBot regular and Big are 254mm /** * Software Endstops @@ -1595,7 +1612,7 @@ #endif // Homing speeds (mm/min) -#define HOMING_FEEDRATE_MM_M { (50*60), (50*60), (4*60) } +#define HOMING_FEEDRATE_MM_M { (50*60), (50*60), (15*60) } // Validate that endstops are triggered on homing moves #define VALIDATE_HOMING_ENDSTOPS @@ -1672,7 +1689,7 @@ * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) */ -//#define EEPROM_SETTINGS // Persistent storage with M500 and M501 +#define EEPROM_SETTINGS // Persistent storage with M500 and M501 //#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. #define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load @@ -1709,13 +1726,13 @@ #define PREHEAT_1_TEMP_HOTEND 180 #define PREHEAT_1_TEMP_BED 70 #define PREHEAT_1_TEMP_CHAMBER 35 -#define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 +#define PREHEAT_1_FAN_SPEED 255 // Value from 0 to 255 #define PREHEAT_2_LABEL "ABS" #define PREHEAT_2_TEMP_HOTEND 240 #define PREHEAT_2_TEMP_BED 110 #define PREHEAT_2_TEMP_CHAMBER 35 -#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 +#define PREHEAT_2_FAN_SPEED 255 // Value from 0 to 255 /** * Nozzle Park @@ -1936,7 +1953,7 @@ * SD Card support is disabled by default. If your controller has an SD slot, * you must uncomment the following option or it won't work. */ -//#define SDSUPPORT +#define SDSUPPORT /** * SD CARD: ENABLE CRC @@ -2081,7 +2098,7 @@ // RigidBot Panel V1.0 // http://www.inventapart.com/ // -//#define RIGIDBOT_PANEL +#define RIGIDBOT_PANEL // // Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller @@ -2195,6 +2212,8 @@ // RepRapDiscount FULL GRAPHIC Smart Controller // https://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller // +// RigidBoard: To rewire this for a RigidBot see http://rigidtalk.com/wiki/index.php?title=LCD_Smart_Controller +// //#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER // diff --git a/config/examples/RigidBot/Configuration_adv.h b/config/examples/RigidBot/Configuration_adv.h index 5335fa012a..d01c666917 100644 --- a/config/examples/RigidBot/Configuration_adv.h +++ b/config/examples/RigidBot/Configuration_adv.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "RigidBot" + /** * Configuration_adv.h * @@ -461,9 +463,9 @@ * The fan turns on automatically whenever any driver is enabled and turns * off (or reduces to idle speed) shortly after drivers are turned off. */ -//#define USE_CONTROLLER_FAN +#define USE_CONTROLLER_FAN #if ENABLED(USE_CONTROLLER_FAN) - //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan + #define CONTROLLER_FAN_PIN 4 // Set a custom pin for the controller fan //#define CONTROLLER_FAN_USE_Z_ONLY // With this option only the Z axis is considered //#define CONTROLLER_FAN_IGNORE_Z // Ignore Z stepper. Useful when stepper timeout is disabled. #define CONTROLLERFAN_SPEED_MIN 0 // (0-255) Minimum speed. (If set below this value the fan is turned off.) @@ -867,7 +869,7 @@ // On a 300mm bed a 5% grade would give a misalignment of ~1.5cm #define G34_MAX_GRADE 5 // (%) Maximum incline that G34 will handle - #define Z_STEPPER_ALIGN_ITERATIONS 5 // Number of iterations to apply during alignment + #define Z_STEPPER_ALIGN_ITERATIONS 3 // Number of iterations to apply during alignment #define Z_STEPPER_ALIGN_ACC 0.02 // Stop iterating early if the accuracy is better than this #define RESTORE_LEVELING_AFTER_G34 // Restore leveling after G34 is done? // After G34, re-home Z (G28 Z) or just calculate it from the last probe heights? @@ -925,7 +927,7 @@ * Set DISABLE_INACTIVE_? 'true' to shut down axis steppers after an idle period. * The Deactive Time can be overridden with M18 and M84. Set to 0 for No Timeout. */ -#define DEFAULT_STEPPER_DEACTIVE_TIME 120 +#define DEFAULT_STEPPER_DEACTIVE_TIME 60 #define DISABLE_INACTIVE_X true #define DISABLE_INACTIVE_Y true #define DISABLE_INACTIVE_Z true // Set 'false' if the nozzle could fall onto your printed part! @@ -1274,7 +1276,7 @@ * * :['SPI_HALF_SPEED', 'SPI_QUARTER_SPEED', 'SPI_EIGHTH_SPEED'] */ - //#define SD_SPI_SPEED SPI_HALF_SPEED + #define SD_SPI_SPEED SPI_EIGHTH_SPEED // The standard SD detect circuit reads LOW when media is inserted and HIGH when empty. // Enable this option and set to HIGH if your SD cards are incorrectly detected. @@ -2091,7 +2093,7 @@ // The ASCII buffer for serial input #define MAX_CMD_SIZE 96 -#define BUFSIZE 4 +#define BUFSIZE 8 // Transmission to Host Buffer Size // To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0. @@ -3562,12 +3564,12 @@ #define MAIN_MENU_ITEM_2_GCODE "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND) //#define MAIN_MENU_ITEM_2_CONFIRM - //#define MAIN_MENU_ITEM_3_DESC "Preheat for " PREHEAT_2_LABEL - //#define MAIN_MENU_ITEM_3_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) + #define MAIN_MENU_ITEM_3_DESC "Preheat for " PREHEAT_2_LABEL + #define MAIN_MENU_ITEM_3_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) //#define MAIN_MENU_ITEM_3_CONFIRM - //#define MAIN_MENU_ITEM_4_DESC "Heat Bed/Home/Level" - //#define MAIN_MENU_ITEM_4_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29" + #define MAIN_MENU_ITEM_4_DESC "Heat Bed/Home/Level" + #define MAIN_MENU_ITEM_4_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29" //#define MAIN_MENU_ITEM_4_CONFIRM //#define MAIN_MENU_ITEM_5_DESC "Home & Info" diff --git a/config/examples/Robo3D/R1+/Configuration.h b/config/examples/Robo3D/R1+/Configuration.h index 78c2dc9160..08148a83d9 100644 --- a/config/examples/Robo3D/R1+/Configuration.h +++ b/config/examples/Robo3D/R1+/Configuration.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Robo3D/R1+" + /** * Configuration.h * @@ -69,7 +71,7 @@ // @section info // Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes. +#define STRING_CONFIG_H_AUTHOR "(Nicholas Romero, Robo3D R1+)" // Who made the changes. //#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) /** @@ -138,7 +140,7 @@ #endif // Name displayed in the LCD "Ready" message and Info menu -//#define CUSTOM_MACHINE_NAME "3D Printer" +#define CUSTOM_MACHINE_NAME "R1+" // Printer's unique ID, used by some programs to differentiate between machines. // Choose your own or use a service like https://www.uuidgenerator.net/version4 @@ -424,7 +426,7 @@ #define TEMP_SENSOR_5 0 #define TEMP_SENSOR_6 0 #define TEMP_SENSOR_7 0 -#define TEMP_SENSOR_BED 0 +#define TEMP_SENSOR_BED 1 // ncrmro #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 #define TEMP_SENSOR_COOLER 0 @@ -806,7 +808,7 @@ * Override with M92 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 500 } +#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 2560, 723.38 } // ncrmro /** * Default Max Feed Rate (mm/s) @@ -1177,7 +1179,7 @@ // WARNING: When motors turn off there is a chance of losing position accuracy! #define DISABLE_X false #define DISABLE_Y false -#define DISABLE_Z false +#define DISABLE_Z true // ncrmro // Turn off the display blinking that warns about possible accuracy reduction //#define DISABLE_REDUCED_ACCURACY_WARNING @@ -1190,9 +1192,9 @@ // @section machine // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR false -#define INVERT_Y_DIR true -#define INVERT_Z_DIR false +#define INVERT_X_DIR true // ncrmro +#define INVERT_Y_DIR false // ncrmro +#define INVERT_Z_DIR true // ncrmro // @section extruder @@ -1232,8 +1234,8 @@ // @section machine // The size of the printable area -#define X_BED_SIZE 200 -#define Y_BED_SIZE 200 +#define X_BED_SIZE 240 // ncrmro +#define Y_BED_SIZE 254 // ncrmro // Travel limits (mm) after homing, corresponding to endstop positions. #define X_MIN_POS 0 @@ -1241,7 +1243,7 @@ #define Z_MIN_POS 0 #define X_MAX_POS X_BED_SIZE #define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 200 +#define Z_MAX_POS 240 // ncrmro /** * Software Endstops @@ -1253,7 +1255,7 @@ */ // Min software endstops constrain movement within minimum coordinate bounds -#define MIN_SOFTWARE_ENDSTOPS +#define MIN_SOFTWARE_ENDSTOPS false // ncrmro #if ENABLED(MIN_SOFTWARE_ENDSTOPS) #define MIN_SOFTWARE_ENDSTOP_X #define MIN_SOFTWARE_ENDSTOP_Y @@ -1261,7 +1263,7 @@ #endif // Max software endstops constrain movement within maximum coordinate bounds -#define MAX_SOFTWARE_ENDSTOPS +#define MAX_SOFTWARE_ENDSTOPS true // ncrmro #if ENABLED(MAX_SOFTWARE_ENDSTOPS) #define MAX_SOFTWARE_ENDSTOP_X #define MAX_SOFTWARE_ENDSTOP_Y diff --git a/config/examples/SCARA/MP_SCARA/Configuration.h b/config/examples/SCARA/MP_SCARA/Configuration.h index 78c2dc9160..45efae2ab2 100644 --- a/config/examples/SCARA/MP_SCARA/Configuration.h +++ b/config/examples/SCARA/MP_SCARA/Configuration.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "SCARA/MP_SCARA" + /** * Configuration.h * @@ -58,12 +60,57 @@ */ //=========================================================================== -//========================== DELTA / SCARA / TPARA ========================== +//============================= SCARA Printer =============================== //=========================================================================== -// -// Download configurations from the link above and customize for your machine. -// Examples are located in config/examples/delta, .../SCARA, and .../TPARA. -// + +/** + * MORGAN_SCARA was developed by QHARLEY in South Africa in 2012-2013. + * Implemented and slightly reworked by JCERNY in June, 2014. + */ +//#define MORGAN_SCARA + +/** + * Mostly Printed SCARA is an open source design by Tyler Williams. See: + * https://www.thingiverse.com/thing:2487048 + * https://www.thingiverse.com/thing:1241491 + */ +#define MP_SCARA + +#if EITHER(MORGAN_SCARA, MP_SCARA) + // If movement is choppy try lowering this value + #define SCARA_SEGMENTS_PER_SECOND 200 + + // Length of inner and outer support arms. Measure arm lengths precisely. + #define SCARA_LINKAGE_1 98.41 // (mm) + #define SCARA_LINKAGE_2 100.66 // (mm) + + // SCARA tower offset (position of Tower relative to bed zero position) + // This needs to be reasonably accurate as it defines the printbed position in the SCARA space. + #define SCARA_OFFSET_X 0 // (mm) + #define SCARA_OFFSET_Y 0 // (mm) + + #if ENABLED(MORGAN_SCARA) + + //#define DEBUG_SCARA_KINEMATICS + #define SCARA_FEEDRATE_SCALING // Convert XY feedrate from mm/s to degrees/s on the fly + + // Radius around the center where the arm cannot reach + #define MIDDLE_DEAD_ZONE_R 0 // (mm) + + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + + #elif ENABLED(MP_SCARA) + + #define SCARA_OFFSET_THETA1 12 // degrees + #define SCARA_OFFSET_THETA2 131 // degrees + + #endif + +#endif + +//=========================================================================== +//==================== END ==== SCARA Printer ==== END ====================== //=========================================================================== // @section info @@ -138,7 +185,7 @@ #endif // Name displayed in the LCD "Ready" message and Info menu -//#define CUSTOM_MACHINE_NAME "3D Printer" +#define CUSTOM_MACHINE_NAME "SCARA" // Printer's unique ID, used by some programs to differentiate between machines. // Choose your own or use a service like https://www.uuidgenerator.net/version4 @@ -424,7 +471,7 @@ #define TEMP_SENSOR_5 0 #define TEMP_SENSOR_6 0 #define TEMP_SENSOR_7 0 -#define TEMP_SENSOR_BED 0 +#define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 #define TEMP_SENSOR_COOLER 0 @@ -444,11 +491,11 @@ //#define TEMP_SENSOR_1_AS_REDUNDANT #define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10 -#define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 +#define TEMP_RESIDENCY_TIME 3 // (seconds) Time to wait for hotend to "settle" in M109 +#define TEMP_HYSTERESIS 2 // (°C) Temperature proximity considered "close enough" to the target #define TEMP_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target -#define TEMP_BED_RESIDENCY_TIME 10 // (seconds) Time to wait for bed to "settle" in M190 +#define TEMP_BED_RESIDENCY_TIME 0 // (seconds) Time to wait for bed to "settle" in M190 #define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer #define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target @@ -510,16 +557,17 @@ //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) // Set/get with gcode: M301 E[extruder number, 0-2] + // Merlin Hotend: From Autotune #if ENABLED(PID_PARAMS_PER_HOTEND) // Specify between 1 and HOTENDS values per array. // If fewer than EXTRUDER values are provided, the last element will be repeated. - #define DEFAULT_Kp_LIST { 22.20, 22.20 } - #define DEFAULT_Ki_LIST { 1.08, 1.08 } - #define DEFAULT_Kd_LIST { 114.00, 114.00 } + #define DEFAULT_Kp_LIST { 24.50, 24.50 } + #define DEFAULT_Ki_LIST { 1.72, 1.72 } + #define DEFAULT_Kd_LIST { 87.73, 87.73 } #else - #define DEFAULT_Kp 22.20 - #define DEFAULT_Ki 1.08 - #define DEFAULT_Kd 114.00 + #define DEFAULT_Kp 24.50 + #define DEFAULT_Ki 1.72 + #define DEFAULT_Kd 87.73 #endif #endif // PIDTEMP @@ -540,7 +588,7 @@ * heater. If your configuration is significantly different than this and you don't understand * the issues involved, don't use bed PID until someone else verifies that your hardware works. */ -//#define PIDTEMPBED +#define PIDTEMPBED //#define BED_LIMIT_SWITCHING @@ -556,11 +604,11 @@ //#define MIN_BED_POWER 0 //#define PID_BED_DEBUG // Sends debug data to the serial port. - // 120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - // from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) - #define DEFAULT_bedKp 10.00 - #define DEFAULT_bedKi .023 - #define DEFAULT_bedKd 305.4 + // 12v Heatbed Mk3 12V in parallel + // from pidautotune + #define DEFAULT_bedKp 630.14 + #define DEFAULT_bedKi 121.71 + #define DEFAULT_bedKd 815.64 // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. #endif // PIDTEMPBED @@ -613,7 +661,7 @@ //#define PID_DEBUG // Sends debug data to the serial port. Use 'M303 D' to toggle activation. //#define PID_OPENLOOP // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX //#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay - #define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature + #define PID_FUNCTIONAL_RANGE 20 // If the temperature difference between the target temperature and the actual temperature // is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max. #endif @@ -684,11 +732,11 @@ // Almost all printers will be using one per axis. Probes will use one or more of the // extra connectors. Leave undefined any used for non-endstop and non-probe purposes. #define USE_XMIN_PLUG -#define USE_YMIN_PLUG +//#define USE_YMIN_PLUG #define USE_ZMIN_PLUG //#define USE_XMAX_PLUG -//#define USE_YMAX_PLUG -//#define USE_ZMAX_PLUG +#define USE_YMAX_PLUG +#define USE_ZMAX_PLUG // Enable pullup for all endstops to prevent a floating state #define ENDSTOPPULLUPS @@ -696,9 +744,9 @@ // Disable ENDSTOPPULLUPS to set pullups individually //#define ENDSTOPPULLUP_XMAX //#define ENDSTOPPULLUP_YMAX - //#define ENDSTOPPULLUP_ZMAX - //#define ENDSTOPPULLUP_XMIN - //#define ENDSTOPPULLUP_YMIN + //#define ENDSTOPPULLUP_ZMAX // open pin, inverted + //#define ENDSTOPPULLUP_XMIN // open pin, inverted + //#define ENDSTOPPULLUP_YMIN // open pin, inverted //#define ENDSTOPPULLUP_ZMIN //#define ENDSTOPPULLUP_ZMIN_PROBE #endif @@ -721,7 +769,7 @@ #define Y_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. #define Z_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. #define X_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. +#define Y_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. #define Z_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. #define Z_MIN_PROBE_ENDSTOP_INVERTING false // Set to true to invert the logic of the probe. @@ -806,14 +854,14 @@ * Override with M92 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 500 } +#define DEFAULT_AXIS_STEPS_PER_UNIT { 28.6738351, 28.6738351, 1600, 93 } /** * Default Max Feed Rate (mm/s) * Override with M203 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 } +#define DEFAULT_MAX_FEEDRATE { 300, 300, 2.5, 25 } //#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 #if ENABLED(LIMITED_MAX_FR_EDITING) @@ -826,7 +874,7 @@ * Override with M201 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 } +#define DEFAULT_MAX_ACCELERATION { 1000, 1000, 10, 20000 } //#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 #if ENABLED(LIMITED_MAX_ACCEL_EDITING) @@ -841,9 +889,9 @@ * M204 R Retract Acceleration * M204 T Travel Acceleration */ -#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves +#define DEFAULT_ACCELERATION 1000 // X, Y, Z and E acceleration for printing moves +#define DEFAULT_RETRACT_ACCELERATION 1000 // E acceleration for retracts +#define DEFAULT_TRAVEL_ACCELERATION 1000 // X, Y, Z acceleration for travel (non printing) moves /** * Default Jerk limits (mm/s) @@ -853,10 +901,10 @@ * When changing speed and direction, if the difference is less than the * value set here, it may happen instantaneously. */ -//#define CLASSIC_JERK +#define CLASSIC_JERK #if ENABLED(CLASSIC_JERK) - #define DEFAULT_XJERK 10.0 - #define DEFAULT_YJERK 10.0 + #define DEFAULT_XJERK 5.0 + #define DEFAULT_YJERK 5.0 #define DEFAULT_ZJERK 0.3 //#define TRAVEL_EXTRA_XYJERK 0.0 // Additional jerk allowance for all travel moves @@ -867,7 +915,7 @@ #endif #endif -#define DEFAULT_EJERK 5.0 // May be used by Linear Advance +#define DEFAULT_EJERK 3.0 // May be used by Linear Advance /** * Junction Deviation Factor @@ -877,7 +925,7 @@ * https://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html */ #if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.013 // (mm) Distance from real junction edge + #define JUNCTION_DEVIATION_MM 0.025 // (mm) Distance from real junction edge #define JD_HANDLE_SMALL_SEGMENTS // Use curvature estimation instead of just the junction angle // for small segments (< 1mm) with large junction angles (> 135°). #endif @@ -1055,7 +1103,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +#define NOZZLE_TO_PROBE_OFFSET { -25, -29, -12.35 } // Most probes should stay away from the edges of the bed, but // with NOZZLE_AS_PROBE this can be negative for a wider probing area. @@ -1123,7 +1171,7 @@ * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. */ -#define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow +#define Z_CLEARANCE_DEPLOY_PROBE 15 // Z Clearance for Deploy/Stow #define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points #define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes //#define Z_AFTER_PROBING 5 // Z position after probing is done @@ -1226,8 +1274,8 @@ // Direction of endstops when homing; 1=MAX, -1=MIN // :[-1,1] #define X_HOME_DIR -1 -#define Y_HOME_DIR -1 -#define Z_HOME_DIR -1 +#define Y_HOME_DIR 1 +#define Z_HOME_DIR 1 // @section machine @@ -1240,8 +1288,8 @@ #define Y_MIN_POS 0 #define Z_MIN_POS 0 #define X_MAX_POS X_BED_SIZE -#define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 200 +#define Y_MAX_POS X_BED_SIZE +#define Z_MAX_POS 100 /** * Software Endstops @@ -1574,8 +1622,8 @@ // Manually set the home position. Leave these undefined for automatic settings. // For DELTA this is the top-center of the Cartesian print volume. -//#define MANUAL_X_HOME_POS 0 -//#define MANUAL_Y_HOME_POS 0 +#define MANUAL_X_HOME_POS 0 +#define MANUAL_Y_HOME_POS 199.07 //#define MANUAL_Z_HOME_POS 0 // Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area. @@ -1595,7 +1643,7 @@ #endif // Homing speeds (mm/min) -#define HOMING_FEEDRATE_MM_M { (50*60), (50*60), (4*60) } +#define HOMING_FEEDRATE_MM_M { (20*60), (20*60), (4*60) } // Validate that endstops are triggered on homing moves #define VALIDATE_HOMING_ENDSTOPS @@ -1709,13 +1757,13 @@ #define PREHEAT_1_TEMP_HOTEND 180 #define PREHEAT_1_TEMP_BED 70 #define PREHEAT_1_TEMP_CHAMBER 35 -#define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 +#define PREHEAT_1_FAN_SPEED 255 // Value from 0 to 255 #define PREHEAT_2_LABEL "ABS" #define PREHEAT_2_TEMP_HOTEND 240 -#define PREHEAT_2_TEMP_BED 110 +#define PREHEAT_2_TEMP_BED 100 #define PREHEAT_2_TEMP_CHAMBER 35 -#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 +#define PREHEAT_2_FAN_SPEED 255 // Value from 0 to 255 /** * Nozzle Park diff --git a/config/examples/SCARA/MP_SCARA/Configuration_adv.h b/config/examples/SCARA/MP_SCARA/Configuration_adv.h index 5335fa012a..25f4466f13 100644 --- a/config/examples/SCARA/MP_SCARA/Configuration_adv.h +++ b/config/examples/SCARA/MP_SCARA/Configuration_adv.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "SCARA/MP_SCARA" + /** * Configuration_adv.h * @@ -140,7 +142,7 @@ // Heated Bed Bang-Bang options // #if DISABLED(PIDTEMPBED) - #define BED_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #define BED_CHECK_INTERVAL 3000 // (ms) Interval between checks in bang-bang control #if ENABLED(BED_LIMIT_SWITCHING) #define BED_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > BED_HYSTERESIS #endif @@ -429,8 +431,8 @@ #if ENABLED(EXTRUDER_RUNOUT_PREVENT) #define EXTRUDER_RUNOUT_MINTEMP 190 #define EXTRUDER_RUNOUT_SECONDS 30 - #define EXTRUDER_RUNOUT_SPEED 1500 // (mm/min) - #define EXTRUDER_RUNOUT_EXTRUDE 5 // (mm) + #define EXTRUDER_RUNOUT_SPEED 180 // (mm/min) + #define EXTRUDER_RUNOUT_EXTRUDE 5 // (mm) #endif /** @@ -481,9 +483,6 @@ // before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) //#define FAN_KICKSTART_TIME 100 -// Some coolers may require a non-zero "off" state. -//#define FAN_OFF_PWM 1 - /** * PWM Fan Scaling * @@ -736,7 +735,7 @@ //#define SENSORLESS_BACKOFF_MM { 2, 2 } // (mm) Backoff from endstops before sensorless homing -#define HOMING_BUMP_MM { 5, 5, 2 } // (mm) Backoff from endstops after first bump +#define HOMING_BUMP_MM { 3, 3, 3 } // (mm) Backoff from endstops after first bump #define HOMING_BUMP_DIVISOR { 2, 2, 4 } // Re-Bump Speed Divisor (Divides the Homing Feedrate) //#define HOMING_BACKOFF_POST_MM { 2, 2, 2 } // (mm) Backoff from endstops after homing @@ -826,7 +825,7 @@ // Define probe X and Y positions for Z1, Z2 [, Z3 [, Z4]] // If not defined, probe limits will be used. // Override with 'M422 S X Y' - //#define Z_STEPPER_ALIGN_XY { { 10, 190 }, { 100, 10 }, { 190, 190 } } + //#define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } /** * Orientation for the automatically-calculated probe positions. @@ -867,7 +866,7 @@ // On a 300mm bed a 5% grade would give a misalignment of ~1.5cm #define G34_MAX_GRADE 5 // (%) Maximum incline that G34 will handle - #define Z_STEPPER_ALIGN_ITERATIONS 5 // Number of iterations to apply during alignment + #define Z_STEPPER_ALIGN_ITERATIONS 3 // Number of iterations to apply during alignment #define Z_STEPPER_ALIGN_ACC 0.02 // Stop iterating early if the accuracy is better than this #define RESTORE_LEVELING_AFTER_G34 // Restore leveling after G34 is done? // After G34, re-home Z (G28 Z) or just calculate it from the last probe heights? @@ -925,7 +924,7 @@ * Set DISABLE_INACTIVE_? 'true' to shut down axis steppers after an idle period. * The Deactive Time can be overridden with M18 and M84. Set to 0 for No Timeout. */ -#define DEFAULT_STEPPER_DEACTIVE_TIME 120 +#define DEFAULT_STEPPER_DEACTIVE_TIME 240 #define DISABLE_INACTIVE_X true #define DISABLE_INACTIVE_Y true #define DISABLE_INACTIVE_Z true // Set 'false' if the nozzle could fall onto your printed part! @@ -1134,7 +1133,7 @@ // @section lcd #if EITHER(IS_ULTIPANEL, EXTENSIBLE_UI) - #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel + #define MANUAL_FEEDRATE { 50*60, 50*60, 10*60, 60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines #if IS_ULTIPANEL #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position" @@ -1301,7 +1300,7 @@ //#define BROWSE_MEDIA_ON_INSERT // Open the file browser when media is inserted - #define EVENT_GCODE_SD_ABORT "G28XY" // G-code to run on SD Abort Print (e.g., "G28XY" or "G27") + //#define EVENT_GCODE_SD_ABORT "G28XY" // G-code to run on SD Abort Print (e.g., "G28XY" or "G27") #if ENABLED(PRINTER_EVENT_LEDS) #define PE_LEDS_COMPLETED_TIME (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination @@ -2213,7 +2212,7 @@ #endif #define RETRACT_LENGTH 3 // (mm) Default retract length (positive value) #define RETRACT_LENGTH_SWAP 13 // (mm) Default swap retract length (positive value) - #define RETRACT_FEEDRATE 45 // (mm/s) Default feedrate for retracting + #define RETRACT_FEEDRATE 35 // (mm/s) Default feedrate for retracting #define RETRACT_ZRAISE 0 // (mm) Default retract Z-raise #define RETRACT_RECOVER_LENGTH 0 // (mm) Default additional recover length (added to retract length on recover) #define RETRACT_RECOVER_LENGTH_SWAP 0 // (mm) Default additional swap recover length (added to retract length on recover from toolchange) @@ -3562,12 +3561,12 @@ #define MAIN_MENU_ITEM_2_GCODE "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND) //#define MAIN_MENU_ITEM_2_CONFIRM - //#define MAIN_MENU_ITEM_3_DESC "Preheat for " PREHEAT_2_LABEL - //#define MAIN_MENU_ITEM_3_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) + #define MAIN_MENU_ITEM_3_DESC "Preheat for " PREHEAT_2_LABEL + #define MAIN_MENU_ITEM_3_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) //#define MAIN_MENU_ITEM_3_CONFIRM - //#define MAIN_MENU_ITEM_4_DESC "Heat Bed/Home/Level" - //#define MAIN_MENU_ITEM_4_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29" + #define MAIN_MENU_ITEM_4_DESC "Heat Bed/Home/Level" + #define MAIN_MENU_ITEM_4_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29" //#define MAIN_MENU_ITEM_4_CONFIRM //#define MAIN_MENU_ITEM_5_DESC "Home & Info" diff --git a/config/examples/SCARA/Morgan/Configuration.h b/config/examples/SCARA/Morgan/Configuration.h index 78c2dc9160..27f00d0e3f 100644 --- a/config/examples/SCARA/Morgan/Configuration.h +++ b/config/examples/SCARA/Morgan/Configuration.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "SCARA/Morgan" + /** * Configuration.h * @@ -58,12 +60,57 @@ */ //=========================================================================== -//========================== DELTA / SCARA / TPARA ========================== +//============================= SCARA Printer =============================== //=========================================================================== -// -// Download configurations from the link above and customize for your machine. -// Examples are located in config/examples/delta, .../SCARA, and .../TPARA. -// + +/** + * MORGAN_SCARA was developed by QHARLEY in South Africa in 2012-2013. + * Implemented and slightly reworked by JCERNY in June, 2014. + */ +#define MORGAN_SCARA + +/** + * Mostly Printed SCARA is an open source design by Tyler Williams. See: + * https://www.thingiverse.com/thing:2487048 + * https://www.thingiverse.com/thing:1241491 + */ +//#define MP_SCARA + +#if EITHER(MORGAN_SCARA, MP_SCARA) + // If movement is choppy try lowering this value + #define SCARA_SEGMENTS_PER_SECOND 200 + + // Length of inner and outer support arms. Measure arm lengths precisely. + #define SCARA_LINKAGE_1 150 // (mm) + #define SCARA_LINKAGE_2 150 // (mm) + + // SCARA tower offset (position of Tower relative to bed zero position) + // This needs to be reasonably accurate as it defines the printbed position in the SCARA space. + #define SCARA_OFFSET_X 100 // (mm) + #define SCARA_OFFSET_Y -56 // (mm) + + #if ENABLED(MORGAN_SCARA) + + //#define DEBUG_SCARA_KINEMATICS + #define SCARA_FEEDRATE_SCALING // Convert XY feedrate from mm/s to degrees/s on the fly + + // Radius around the center where the arm cannot reach + #define MIDDLE_DEAD_ZONE_R 0 // (mm) + + #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + + #elif ENABLED(MP_SCARA) + + #define SCARA_OFFSET_THETA1 12 // degrees + #define SCARA_OFFSET_THETA2 131 // degrees + + #endif + +#endif + +//=========================================================================== +//==================== END ==== SCARA Printer ==== END ====================== //=========================================================================== // @section info @@ -138,7 +185,7 @@ #endif // Name displayed in the LCD "Ready" message and Info menu -//#define CUSTOM_MACHINE_NAME "3D Printer" +#define CUSTOM_MACHINE_NAME "SCARA" // Printer's unique ID, used by some programs to differentiate between machines. // Choose your own or use a service like https://www.uuidgenerator.net/version4 @@ -151,7 +198,7 @@ #define EXTRUDERS 1 // Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc. -#define DEFAULT_NOMINAL_FILAMENT_DIA 1.75 +#define DEFAULT_NOMINAL_FILAMENT_DIA 3.0 // For Cyclops or any "multi-extruder" that shares a single nozzle. //#define SINGLENOZZLE @@ -318,7 +365,7 @@ * Enable and connect the power supply to the PS_ON_PIN. * Specify whether the power supply is active HIGH or active LOW. */ -//#define PSU_CONTROL +#define PSU_CONTROL //#define PSU_NAME "Power Supply" #if ENABLED(PSU_CONTROL) @@ -424,7 +471,7 @@ #define TEMP_SENSOR_5 0 #define TEMP_SENSOR_6 0 #define TEMP_SENSOR_7 0 -#define TEMP_SENSOR_BED 0 +#define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 #define TEMP_SENSOR_COOLER 0 @@ -444,11 +491,11 @@ //#define TEMP_SENSOR_1_AS_REDUNDANT #define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10 -#define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 +#define TEMP_RESIDENCY_TIME 3 // (seconds) Time to wait for hotend to "settle" in M109 +#define TEMP_HYSTERESIS 2 // (°C) Temperature proximity considered "close enough" to the target #define TEMP_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target -#define TEMP_BED_RESIDENCY_TIME 10 // (seconds) Time to wait for bed to "settle" in M190 +#define TEMP_BED_RESIDENCY_TIME 0 // (seconds) Time to wait for bed to "settle" in M190 #define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer #define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target @@ -510,16 +557,17 @@ //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) // Set/get with gcode: M301 E[extruder number, 0-2] + // Merlin Hotend: From Autotune #if ENABLED(PID_PARAMS_PER_HOTEND) // Specify between 1 and HOTENDS values per array. // If fewer than EXTRUDER values are provided, the last element will be repeated. - #define DEFAULT_Kp_LIST { 22.20, 22.20 } - #define DEFAULT_Ki_LIST { 1.08, 1.08 } - #define DEFAULT_Kd_LIST { 114.00, 114.00 } + #define DEFAULT_Kp_LIST { 24.50, 24.50 } + #define DEFAULT_Ki_LIST { 1.72, 1.72 } + #define DEFAULT_Kd_LIST { 87.73, 87.73 } #else - #define DEFAULT_Kp 22.20 - #define DEFAULT_Ki 1.08 - #define DEFAULT_Kd 114.00 + #define DEFAULT_Kp 24.50 + #define DEFAULT_Ki 1.72 + #define DEFAULT_Kd 87.73 #endif #endif // PIDTEMP @@ -540,7 +588,7 @@ * heater. If your configuration is significantly different than this and you don't understand * the issues involved, don't use bed PID until someone else verifies that your hardware works. */ -//#define PIDTEMPBED +#define PIDTEMPBED //#define BED_LIMIT_SWITCHING @@ -556,11 +604,11 @@ //#define MIN_BED_POWER 0 //#define PID_BED_DEBUG // Sends debug data to the serial port. - // 120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - // from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) - #define DEFAULT_bedKp 10.00 - #define DEFAULT_bedKi .023 - #define DEFAULT_bedKd 305.4 + // 12v Heatbed Mk3 12V in parallel + // from pidautotune + #define DEFAULT_bedKp 630.14 + #define DEFAULT_bedKi 121.71 + #define DEFAULT_bedKd 815.64 // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. #endif // PIDTEMPBED @@ -613,7 +661,7 @@ //#define PID_DEBUG // Sends debug data to the serial port. Use 'M303 D' to toggle activation. //#define PID_OPENLOOP // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX //#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay - #define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature + #define PID_FUNCTIONAL_RANGE 20 // If the temperature difference between the target temperature and the actual temperature // is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max. #endif @@ -683,23 +731,23 @@ // Specify here all the endstop connectors that are connected to any endstop or probe. // Almost all printers will be using one per axis. Probes will use one or more of the // extra connectors. Leave undefined any used for non-endstop and non-probe purposes. -#define USE_XMIN_PLUG -#define USE_YMIN_PLUG +//#define USE_XMIN_PLUG +//#define USE_YMIN_PLUG #define USE_ZMIN_PLUG -//#define USE_XMAX_PLUG -//#define USE_YMAX_PLUG +#define USE_XMAX_PLUG +#define USE_YMAX_PLUG //#define USE_ZMAX_PLUG // Enable pullup for all endstops to prevent a floating state -#define ENDSTOPPULLUPS +//#define ENDSTOPPULLUPS #if DISABLED(ENDSTOPPULLUPS) // Disable ENDSTOPPULLUPS to set pullups individually - //#define ENDSTOPPULLUP_XMAX - //#define ENDSTOPPULLUP_YMAX - //#define ENDSTOPPULLUP_ZMAX - //#define ENDSTOPPULLUP_XMIN - //#define ENDSTOPPULLUP_YMIN - //#define ENDSTOPPULLUP_ZMIN + #define ENDSTOPPULLUP_XMAX + #define ENDSTOPPULLUP_YMAX + //#define ENDSTOPPULLUP_ZMAX // open pin, inverted + //#define ENDSTOPPULLUP_XMIN // open pin, inverted + //#define ENDSTOPPULLUP_YMIN // open pin, inverted + #define ENDSTOPPULLUP_ZMIN //#define ENDSTOPPULLUP_ZMIN_PROBE #endif @@ -717,13 +765,13 @@ #endif // Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define X_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_PROBE_ENDSTOP_INVERTING false // Set to true to invert the logic of the probe. +#define X_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Y_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Z_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define X_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Y_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Z_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Z_MIN_PROBE_ENDSTOP_INVERTING true // Set to true to invert the logic of the probe. /** * Stepper Drivers @@ -806,14 +854,14 @@ * Override with M92 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 500 } +#define DEFAULT_AXIS_STEPS_PER_UNIT { 103.69, 106.65, 200/1.25, 1000 } // default steps per unit for SCARA /** * Default Max Feed Rate (mm/s) * Override with M203 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 } +#define DEFAULT_MAX_FEEDRATE { 300, 300, 30, 25 } //#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 #if ENABLED(LIMITED_MAX_FR_EDITING) @@ -826,7 +874,7 @@ * Override with M201 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 } +#define DEFAULT_MAX_ACCELERATION { 300, 300, 20, 1000 } //#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 #if ENABLED(LIMITED_MAX_ACCEL_EDITING) @@ -841,9 +889,9 @@ * M204 R Retract Acceleration * M204 T Travel Acceleration */ -#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves +#define DEFAULT_ACCELERATION 400 // X, Y, Z and E acceleration for printing moves +#define DEFAULT_RETRACT_ACCELERATION 2000 // E acceleration for retracts +#define DEFAULT_TRAVEL_ACCELERATION 400 // X, Y, Z acceleration for travel (non printing) moves /** * Default Jerk limits (mm/s) @@ -853,10 +901,10 @@ * When changing speed and direction, if the difference is less than the * value set here, it may happen instantaneously. */ -//#define CLASSIC_JERK +#define CLASSIC_JERK #if ENABLED(CLASSIC_JERK) - #define DEFAULT_XJERK 10.0 - #define DEFAULT_YJERK 10.0 + #define DEFAULT_XJERK 5.0 + #define DEFAULT_YJERK 5.0 #define DEFAULT_ZJERK 0.3 //#define TRAVEL_EXTRA_XYJERK 0.0 // Additional jerk allowance for all travel moves @@ -867,7 +915,7 @@ #endif #endif -#define DEFAULT_EJERK 5.0 // May be used by Linear Advance +#define DEFAULT_EJERK 3.0 // May be used by Linear Advance /** * Junction Deviation Factor @@ -877,7 +925,7 @@ * https://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html */ #if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.013 // (mm) Distance from real junction edge + #define JUNCTION_DEVIATION_MM 0.025 // (mm) Distance from real junction edge #define JD_HANDLE_SMALL_SEGMENTS // Use curvature estimation instead of just the junction angle // for small segments (< 1mm) with large junction angles (> 135°). #endif @@ -1055,7 +1103,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +#define NOZZLE_TO_PROBE_OFFSET { -25, -29, -12.35 } // Most probes should stay away from the edges of the bed, but // with NOZZLE_AS_PROBE this can be negative for a wider probing area. @@ -1065,7 +1113,7 @@ #define XY_PROBE_FEEDRATE (133*60) // Feedrate (mm/min) for the first approach when double-probing (MULTIPLE_PROBING == 2) -#define Z_PROBE_FEEDRATE_FAST (4*60) +#define Z_PROBE_FEEDRATE_FAST (10*60) // Feedrate (mm/min) for the "accurate" probe of each point #define Z_PROBE_FEEDRATE_SLOW (Z_PROBE_FEEDRATE_FAST / 2) @@ -1123,7 +1171,7 @@ * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. */ -#define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow +#define Z_CLEARANCE_DEPLOY_PROBE 15 // Z Clearance for Deploy/Stow #define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points #define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes //#define Z_AFTER_PROBING 5 // Z position after probing is done @@ -1191,8 +1239,8 @@ // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR false -#define INVERT_Y_DIR true -#define INVERT_Z_DIR false +#define INVERT_Y_DIR false +#define INVERT_Z_DIR true // @section extruder @@ -1225,8 +1273,8 @@ // Direction of endstops when homing; 1=MAX, -1=MIN // :[-1,1] -#define X_HOME_DIR -1 -#define Y_HOME_DIR -1 +#define X_HOME_DIR 1 +#define Y_HOME_DIR 1 #define Z_HOME_DIR -1 // @section machine @@ -1238,10 +1286,10 @@ // Travel limits (mm) after homing, corresponding to endstop positions. #define X_MIN_POS 0 #define Y_MIN_POS 0 -#define Z_MIN_POS 0 +#define Z_MIN_POS MANUAL_Z_HOME_POS #define X_MAX_POS X_BED_SIZE #define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 200 +#define Z_MAX_POS 225 /** * Software Endstops @@ -1574,9 +1622,9 @@ // Manually set the home position. Leave these undefined for automatic settings. // For DELTA this is the top-center of the Cartesian print volume. -//#define MANUAL_X_HOME_POS 0 -//#define MANUAL_Y_HOME_POS 0 -//#define MANUAL_Z_HOME_POS 0 +#define MANUAL_X_HOME_POS -22 +#define MANUAL_Y_HOME_POS -52 +#define MANUAL_Z_HOME_POS 0.1 // Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area. // @@ -1595,7 +1643,7 @@ #endif // Homing speeds (mm/min) -#define HOMING_FEEDRATE_MM_M { (50*60), (50*60), (4*60) } +#define HOMING_FEEDRATE_MM_M { (40*60), (40*60), (10*60) } // Validate that endstops are triggered on homing moves #define VALIDATE_HOMING_ENDSTOPS @@ -1709,13 +1757,13 @@ #define PREHEAT_1_TEMP_HOTEND 180 #define PREHEAT_1_TEMP_BED 70 #define PREHEAT_1_TEMP_CHAMBER 35 -#define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 +#define PREHEAT_1_FAN_SPEED 255 // Value from 0 to 255 #define PREHEAT_2_LABEL "ABS" #define PREHEAT_2_TEMP_HOTEND 240 -#define PREHEAT_2_TEMP_BED 110 +#define PREHEAT_2_TEMP_BED 100 #define PREHEAT_2_TEMP_CHAMBER 35 -#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 +#define PREHEAT_2_FAN_SPEED 255 // Value from 0 to 255 /** * Nozzle Park diff --git a/config/examples/SCARA/Morgan/Configuration_adv.h b/config/examples/SCARA/Morgan/Configuration_adv.h index 5335fa012a..d9aa4e42b6 100644 --- a/config/examples/SCARA/Morgan/Configuration_adv.h +++ b/config/examples/SCARA/Morgan/Configuration_adv.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "SCARA/Morgan" + /** * Configuration_adv.h * @@ -140,7 +142,7 @@ // Heated Bed Bang-Bang options // #if DISABLED(PIDTEMPBED) - #define BED_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #define BED_CHECK_INTERVAL 3000 // (ms) Interval between checks in bang-bang control #if ENABLED(BED_LIMIT_SWITCHING) #define BED_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > BED_HYSTERESIS #endif @@ -429,8 +431,8 @@ #if ENABLED(EXTRUDER_RUNOUT_PREVENT) #define EXTRUDER_RUNOUT_MINTEMP 190 #define EXTRUDER_RUNOUT_SECONDS 30 - #define EXTRUDER_RUNOUT_SPEED 1500 // (mm/min) - #define EXTRUDER_RUNOUT_EXTRUDE 5 // (mm) + #define EXTRUDER_RUNOUT_SPEED 180 // (mm/min) + #define EXTRUDER_RUNOUT_EXTRUDE 5 // (mm) #endif /** @@ -481,9 +483,6 @@ // before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) //#define FAN_KICKSTART_TIME 100 -// Some coolers may require a non-zero "off" state. -//#define FAN_OFF_PWM 1 - /** * PWM Fan Scaling * @@ -736,7 +735,7 @@ //#define SENSORLESS_BACKOFF_MM { 2, 2 } // (mm) Backoff from endstops before sensorless homing -#define HOMING_BUMP_MM { 5, 5, 2 } // (mm) Backoff from endstops after first bump +#define HOMING_BUMP_MM { 3, 3, 3 } // (mm) Backoff from endstops after first bump #define HOMING_BUMP_DIVISOR { 2, 2, 4 } // Re-Bump Speed Divisor (Divides the Homing Feedrate) //#define HOMING_BACKOFF_POST_MM { 2, 2, 2 } // (mm) Backoff from endstops after homing @@ -867,7 +866,7 @@ // On a 300mm bed a 5% grade would give a misalignment of ~1.5cm #define G34_MAX_GRADE 5 // (%) Maximum incline that G34 will handle - #define Z_STEPPER_ALIGN_ITERATIONS 5 // Number of iterations to apply during alignment + #define Z_STEPPER_ALIGN_ITERATIONS 3 // Number of iterations to apply during alignment #define Z_STEPPER_ALIGN_ACC 0.02 // Stop iterating early if the accuracy is better than this #define RESTORE_LEVELING_AFTER_G34 // Restore leveling after G34 is done? // After G34, re-home Z (G28 Z) or just calculate it from the last probe heights? @@ -925,7 +924,7 @@ * Set DISABLE_INACTIVE_? 'true' to shut down axis steppers after an idle period. * The Deactive Time can be overridden with M18 and M84. Set to 0 for No Timeout. */ -#define DEFAULT_STEPPER_DEACTIVE_TIME 120 +#define DEFAULT_STEPPER_DEACTIVE_TIME 240 #define DISABLE_INACTIVE_X true #define DISABLE_INACTIVE_Y true #define DISABLE_INACTIVE_Z true // Set 'false' if the nozzle could fall onto your printed part! @@ -1134,7 +1133,7 @@ // @section lcd #if EITHER(IS_ULTIPANEL, EXTENSIBLE_UI) - #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel + #define MANUAL_FEEDRATE { 50*60, 50*60, 10*60, 60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines #if IS_ULTIPANEL #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position" @@ -1301,7 +1300,7 @@ //#define BROWSE_MEDIA_ON_INSERT // Open the file browser when media is inserted - #define EVENT_GCODE_SD_ABORT "G28XY" // G-code to run on SD Abort Print (e.g., "G28XY" or "G27") + //#define EVENT_GCODE_SD_ABORT "G28XY" // G-code to run on SD Abort Print (e.g., "G28XY" or "G27") #if ENABLED(PRINTER_EVENT_LEDS) #define PE_LEDS_COMPLETED_TIME (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination @@ -2213,7 +2212,7 @@ #endif #define RETRACT_LENGTH 3 // (mm) Default retract length (positive value) #define RETRACT_LENGTH_SWAP 13 // (mm) Default swap retract length (positive value) - #define RETRACT_FEEDRATE 45 // (mm/s) Default feedrate for retracting + #define RETRACT_FEEDRATE 35 // (mm/s) Default feedrate for retracting #define RETRACT_ZRAISE 0 // (mm) Default retract Z-raise #define RETRACT_RECOVER_LENGTH 0 // (mm) Default additional recover length (added to retract length on recover) #define RETRACT_RECOVER_LENGTH_SWAP 0 // (mm) Default additional swap recover length (added to retract length on recover from toolchange) @@ -3562,12 +3561,12 @@ #define MAIN_MENU_ITEM_2_GCODE "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND) //#define MAIN_MENU_ITEM_2_CONFIRM - //#define MAIN_MENU_ITEM_3_DESC "Preheat for " PREHEAT_2_LABEL - //#define MAIN_MENU_ITEM_3_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) + #define MAIN_MENU_ITEM_3_DESC "Preheat for " PREHEAT_2_LABEL + #define MAIN_MENU_ITEM_3_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) //#define MAIN_MENU_ITEM_3_CONFIRM - //#define MAIN_MENU_ITEM_4_DESC "Heat Bed/Home/Level" - //#define MAIN_MENU_ITEM_4_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29" + #define MAIN_MENU_ITEM_4_DESC "Heat Bed/Home/Level" + #define MAIN_MENU_ITEM_4_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29" //#define MAIN_MENU_ITEM_4_CONFIRM //#define MAIN_MENU_ITEM_5_DESC "Home & Info" diff --git a/config/examples/STM32/Black_STM32F407VET6/Configuration.h b/config/examples/STM32/Black_STM32F407VET6/Configuration.h index 78c2dc9160..82b21a2899 100644 --- a/config/examples/STM32/Black_STM32F407VET6/Configuration.h +++ b/config/examples/STM32/Black_STM32F407VET6/Configuration.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "STM32/Black_STM32F407VET6" + /** * Configuration.h * @@ -102,14 +104,14 @@ * * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] */ -#define SERIAL_PORT 0 +#define SERIAL_PORT -1 /** * Select a secondary serial port on the board to use for communication with the host. * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] */ -//#define SERIAL_PORT_2 -1 +#define SERIAL_PORT_2 1 /** * Select a third serial port on the board to use for communication with the host. @@ -134,7 +136,7 @@ // Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_RAMPS_14_EFB + #define MOTHERBOARD BOARD_BLACK_STM32F407VE #endif // Name displayed in the LCD "Ready" message and Info menu @@ -148,7 +150,7 @@ // This defines the number of extruders // :[0, 1, 2, 3, 4, 5, 6, 7, 8] -#define EXTRUDERS 1 +#define EXTRUDERS 2 // Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc. #define DEFAULT_NOMINAL_FILAMENT_DIA 1.75 @@ -417,16 +419,16 @@ * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. */ #define TEMP_SENSOR_0 1 -#define TEMP_SENSOR_1 0 +#define TEMP_SENSOR_1 1 #define TEMP_SENSOR_2 0 #define TEMP_SENSOR_3 0 #define TEMP_SENSOR_4 0 #define TEMP_SENSOR_5 0 #define TEMP_SENSOR_6 0 #define TEMP_SENSOR_7 0 -#define TEMP_SENSOR_BED 0 +#define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 -#define TEMP_SENSOR_CHAMBER 0 +#define TEMP_SENSOR_CHAMBER 1 #define TEMP_SENSOR_COOLER 0 // Dummy thermistor constant temperature readings, for use with 998 and 999 @@ -752,7 +754,7 @@ //#define Z3_DRIVER_TYPE A4988 //#define Z4_DRIVER_TYPE A4988 #define E0_DRIVER_TYPE A4988 -//#define E1_DRIVER_TYPE A4988 +#define E1_DRIVER_TYPE A4988 //#define E2_DRIVER_TYPE A4988 //#define E3_DRIVER_TYPE A4988 //#define E4_DRIVER_TYPE A4988 @@ -762,7 +764,7 @@ // Enable this feature if all enabled endstop pins are interrupt-capable. // This will remove the need to poll the interrupt pins, saving many CPU cycles. -//#define ENDSTOP_INTERRUPTS_FEATURE +#define ENDSTOP_INTERRUPTS_FEATURE /** * Endstop Noise Threshold @@ -806,7 +808,7 @@ * Override with M92 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 500 } +#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 4000, 500 } /** * Default Max Feed Rate (mm/s) @@ -1672,7 +1674,7 @@ * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) */ -//#define EEPROM_SETTINGS // Persistent storage with M500 and M501 +#define EEPROM_SETTINGS // Persistent storage with M500 and M501 //#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. #define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load @@ -2731,12 +2733,12 @@ * Set this manually if there are extra servos needing manual control. * Set to 0 to turn off servo support. */ -//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command +#define NUM_SERVOS 2 // Servo index starts with 0 for M280 command // (ms) Delay before the next move will start, to give the servo time to reach its target angle. // 300ms is a good value but you can try less delay. // If the servo can't reach the requested position, increase it. -#define SERVO_DELAY { 300 } +#define SERVO_DELAY { 300, 300 } // Only power servos during movement, otherwise leave off to prevent jitter //#define DEACTIVATE_SERVOS_AFTER_MOVE diff --git a/config/examples/STM32/Black_STM32F407VET6/Configuration_adv.h b/config/examples/STM32/Black_STM32F407VET6/Configuration_adv.h index 5335fa012a..8b391c8adb 100644 --- a/config/examples/STM32/Black_STM32F407VET6/Configuration_adv.h +++ b/config/examples/STM32/Black_STM32F407VET6/Configuration_adv.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "STM32/Black_STM32F407VET6" + /** * Configuration_adv.h * @@ -540,8 +542,8 @@ * Multiple extruders can be assigned to the same pin in which case * the fan will turn on when any selected extruder is above the threshold. */ -#define E0_AUTO_FAN_PIN -1 -#define E1_AUTO_FAN_PIN -1 +#define E0_AUTO_FAN_PIN FAN1_PIN +#define E1_AUTO_FAN_PIN FAN2_PIN #define E2_AUTO_FAN_PIN -1 #define E3_AUTO_FAN_PIN -1 #define E4_AUTO_FAN_PIN -1 @@ -867,7 +869,7 @@ // On a 300mm bed a 5% grade would give a misalignment of ~1.5cm #define G34_MAX_GRADE 5 // (%) Maximum incline that G34 will handle - #define Z_STEPPER_ALIGN_ITERATIONS 5 // Number of iterations to apply during alignment + #define Z_STEPPER_ALIGN_ITERATIONS 3 // Number of iterations to apply during alignment #define Z_STEPPER_ALIGN_ACC 0.02 // Stop iterating early if the accuracy is better than this #define RESTORE_LEVELING_AFTER_G34 // Restore leveling after G34 is done? // After G34, re-home Z (G28 Z) or just calculate it from the last probe heights? diff --git a/config/examples/STM32/STM32F103RE/Configuration.h b/config/examples/STM32/STM32F103RE/Configuration.h index 78c2dc9160..192ac21f93 100644 --- a/config/examples/STM32/STM32F103RE/Configuration.h +++ b/config/examples/STM32/STM32F103RE/Configuration.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "STM32/STM32F103RE" + /** * Configuration.h * @@ -69,7 +71,7 @@ // @section info // Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes. +#define STRING_CONFIG_H_AUTHOR "Victor Perez" // Who made the changes. //#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) /** @@ -102,7 +104,7 @@ * * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] */ -#define SERIAL_PORT 0 +#define SERIAL_PORT -1 /** * Select a secondary serial port on the board to use for communication with the host. @@ -134,11 +136,11 @@ // Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_RAMPS_14_EFB + #define MOTHERBOARD BOARD_STM32F103RE #endif // Name displayed in the LCD "Ready" message and Info menu -//#define CUSTOM_MACHINE_NAME "3D Printer" +#define CUSTOM_MACHINE_NAME "CTC i3 Pro B" // Printer's unique ID, used by some programs to differentiate between machines. // Choose your own or use a service like https://www.uuidgenerator.net/version4 @@ -416,7 +418,8 @@ * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. */ -#define TEMP_SENSOR_0 1 +#warning temp_sensor set to 998/999 (fake) +#define TEMP_SENSOR_0 999 #define TEMP_SENSOR_1 0 #define TEMP_SENSOR_2 0 #define TEMP_SENSOR_3 0 @@ -424,14 +427,14 @@ #define TEMP_SENSOR_5 0 #define TEMP_SENSOR_6 0 #define TEMP_SENSOR_7 0 -#define TEMP_SENSOR_BED 0 +#define TEMP_SENSOR_BED 998 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 #define TEMP_SENSOR_COOLER 0 // Dummy thermistor constant temperature readings, for use with 998 and 999 -#define DUMMY_THERMISTOR_998_VALUE 25 -#define DUMMY_THERMISTOR_999_VALUE 100 +#define DUMMY_THERMISTOR_998_VALUE 60 +#define DUMMY_THERMISTOR_999_VALUE 205 // Resistor values when using MAX31865 sensors (-5) on TEMP_SENSOR_0 / 1 //#define MAX31865_SENSOR_OHMS_0 100 // (Ω) Typically 100 or 1000 (PT100 or PT1000) @@ -500,13 +503,13 @@ // Comment the following line to disable PID and enable bang-bang. #define PIDTEMP -#define BANG_MAX 255 // Limits current to nozzle while in bang-bang mode; 255=full current +#define BANG_MAX 180 // Limits current to nozzle while in bang-bang mode; 255=full current #define PID_MAX BANG_MAX // Limits current to nozzle while PID is active (see PID_FUNCTIONAL_RANGE below); 255=full current #define PID_K1 0.95 // Smoothing factor within any PID loop #if ENABLED(PIDTEMP) - //#define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) - //#define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) + #define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) + #define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) // Set/get with gcode: M301 E[extruder number, 0-2] @@ -653,8 +656,9 @@ * details can be tuned in Configuration_adv.h */ -#define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders -#define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed +#warning "disabled temperature protection" +//#define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders +//#define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed #define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber #define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling @@ -720,9 +724,9 @@ #define X_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. #define Y_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. #define Z_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define X_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. +#define X_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Y_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Z_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. #define Z_MIN_PROBE_ENDSTOP_INVERTING false // Set to true to invert the logic of the probe. /** @@ -806,14 +810,14 @@ * Override with M92 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 500 } +#define DEFAULT_AXIS_STEPS_PER_UNIT { 78.74, 78.74, 2560, 105.0 } /** * Default Max Feed Rate (mm/s) * Override with M203 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 } +#define DEFAULT_MAX_FEEDRATE { 400, 400, 2, 45 } //#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 #if ENABLED(LIMITED_MAX_FR_EDITING) @@ -826,7 +830,7 @@ * Override with M201 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 } +#define DEFAULT_MAX_ACCELERATION { 1400, 1400, 100, 80000 } //#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 #if ENABLED(LIMITED_MAX_ACCEL_EDITING) @@ -841,8 +845,8 @@ * M204 R Retract Acceleration * M204 T Travel Acceleration */ -#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts +#define DEFAULT_ACCELERATION 1400 // X, Y, Z and E acceleration for printing moves +#define DEFAULT_RETRACT_ACCELERATION 5000 // E acceleration for retracts #define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves /** @@ -855,8 +859,8 @@ */ //#define CLASSIC_JERK #if ENABLED(CLASSIC_JERK) - #define DEFAULT_XJERK 10.0 - #define DEFAULT_YJERK 10.0 + #define DEFAULT_XJERK 13.0 + #define DEFAULT_YJERK 13.0 #define DEFAULT_ZJERK 0.3 //#define TRAVEL_EXTRA_XYJERK 0.0 // Additional jerk allowance for all travel moves @@ -877,7 +881,7 @@ * https://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html */ #if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.013 // (mm) Distance from real junction edge + #define JUNCTION_DEVIATION_MM 0.048 // (mm) Distance from real junction edge #define JD_HANDLE_SMALL_SEGMENTS // Use curvature estimation instead of just the junction angle // for small segments (< 1mm) with large junction angles (> 135°). #endif @@ -1055,7 +1059,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +#define NOZZLE_TO_PROBE_OFFSET { -25, -29, -12.35 } // Most probes should stay away from the edges of the bed, but // with NOZZLE_AS_PROBE this can be negative for a wider probing area. @@ -1197,7 +1201,7 @@ // @section extruder // For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR false +#define INVERT_E0_DIR true #define INVERT_E1_DIR false #define INVERT_E2_DIR false #define INVERT_E3_DIR false @@ -1241,7 +1245,7 @@ #define Z_MIN_POS 0 #define X_MAX_POS X_BED_SIZE #define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 200 +#define Z_MAX_POS 180 /** * Software Endstops @@ -1672,9 +1676,9 @@ * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) */ -//#define EEPROM_SETTINGS // Persistent storage with M500 and M501 +#define EEPROM_SETTINGS // Persistent storage with M500 and M501 //#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! -#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. +//#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. #define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load #if ENABLED(EEPROM_SETTINGS) //#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. @@ -1698,7 +1702,7 @@ // // M149 Set temperature units support // -//#define TEMPERATURE_UNITS_SUPPORT +#define TEMPERATURE_UNITS_SUPPORT // @section temperature @@ -1706,14 +1710,14 @@ // Preheat Constants - Up to 5 are supported without changes // #define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 180 -#define PREHEAT_1_TEMP_BED 70 +#define PREHEAT_1_TEMP_HOTEND 200 +#define PREHEAT_1_TEMP_BED 60 #define PREHEAT_1_TEMP_CHAMBER 35 #define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 #define PREHEAT_2_LABEL "ABS" -#define PREHEAT_2_TEMP_HOTEND 240 -#define PREHEAT_2_TEMP_BED 110 +#define PREHEAT_2_TEMP_HOTEND 220 +#define PREHEAT_2_TEMP_BED 100 #define PREHEAT_2_TEMP_CHAMBER 35 #define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 @@ -1936,7 +1940,7 @@ * SD Card support is disabled by default. If your controller has an SD slot, * you must uncomment the following option or it won't work. */ -//#define SDSUPPORT +#define SDSUPPORT /** * SD CARD: ENABLE CRC diff --git a/config/examples/STM32/STM32F4/Configuration.h b/config/examples/STM32/STM32F4/Configuration.h index 78c2dc9160..edb3a90c2d 100644 --- a/config/examples/STM32/STM32F4/Configuration.h +++ b/config/examples/STM32/STM32F4/Configuration.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "STM32/STM32F4" + /** * Configuration.h * @@ -102,7 +104,7 @@ * * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] */ -#define SERIAL_PORT 0 +#define SERIAL_PORT -1 /** * Select a secondary serial port on the board to use for communication with the host. @@ -134,7 +136,7 @@ // Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_RAMPS_14_EFB + #define MOTHERBOARD BOARD_GENERIC_STM32F4 #endif // Name displayed in the LCD "Ready" message and Info menu @@ -806,7 +808,7 @@ * Override with M92 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 500 } +#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 4000, 500 } /** * Default Max Feed Rate (mm/s) diff --git a/config/examples/Sanguinololu/Configuration.h b/config/examples/Sanguinololu/Configuration.h index 78c2dc9160..b092651bf3 100644 --- a/config/examples/Sanguinololu/Configuration.h +++ b/config/examples/Sanguinololu/Configuration.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Sanguinololu" + /** * Configuration.h * @@ -69,7 +71,7 @@ // @section info // Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes. +#define STRING_CONFIG_H_AUTHOR "(thinkyhead, Sanguinololu)" // Who made the changes. //#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) /** @@ -127,18 +129,18 @@ * * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ -#define BAUDRATE 250000 +#define BAUDRATE 115200 // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH // Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_RAMPS_14_EFB + #define MOTHERBOARD BOARD_SANGUINOLOLU_12 #endif // Name displayed in the LCD "Ready" message and Info menu -//#define CUSTOM_MACHINE_NAME "3D Printer" +#define CUSTOM_MACHINE_NAME "Sanguinololu" // Printer's unique ID, used by some programs to differentiate between machines. // Choose your own or use a service like https://www.uuidgenerator.net/version4 @@ -424,7 +426,7 @@ #define TEMP_SENSOR_5 0 #define TEMP_SENSOR_6 0 #define TEMP_SENSOR_7 0 -#define TEMP_SENSOR_BED 0 +#define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 #define TEMP_SENSOR_COOLER 0 @@ -794,6 +796,37 @@ * Note that if EEPROM is enabled, saved values will override these. */ +// +// Standard NEMA 17 with T2 belt and 20 tooth pulley +// +#define NEMA17_FULL_STEPS 200.0 +#define TEMP_XY_MICROSTEPS 16.0 +#define TEMP_E_MICROSTEPS 16.0 +#define TEMP_Z_MICROSTEPS 16.0 + +#define XY_PULLEY_PITCH 2.0 +#define XY_PULLEY_TEETH 20.0 + +// +// Standard NEMA 17 with fancy 2mm lead screws +// +#define Z_RODS_PITCH 0.5 + +#define XY_MOTOR_STEPS (NEMA17_FULL_STEPS * TEMP_XY_MICROSTEPS) +#define Z_MOTOR_STEPS (NEMA17_FULL_STEPS * TEMP_Z_MICROSTEPS) +#define E_MOTOR_STEPS (NEMA17_FULL_STEPS * TEMP_E_MICROSTEPS) + +// +// MK7 Direct Drive +// +#define MK7_GEAR_DIAM 10.56 +#define MK7_GEAR_CIRC (M_PI * MK7_GEAR_DIAM) +#define E_STEPS (E_MOTOR_STEPS / MK7_GEAR_CIRC) + +// Get steps/mm from selected results above +#define XY_STEPS (XY_MOTOR_STEPS / (XY_PULLEY_PITCH * XY_PULLEY_TEETH)) +#define Z_STEPS (Z_MOTOR_STEPS / Z_RODS_PITCH) + /** * With this option each E stepper can have its own factors for the * following movement settings. If fewer factors are given than the @@ -806,14 +839,14 @@ * Override with M92 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 500 } +#define DEFAULT_AXIS_STEPS_PER_UNIT { XY_STEPS, XY_STEPS, Z_STEPS, E_STEPS } /** * Default Max Feed Rate (mm/s) * Override with M203 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 } +#define DEFAULT_MAX_FEEDRATE { 500, 500, 8, 45 } //#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 #if ENABLED(LIMITED_MAX_FR_EDITING) @@ -1065,7 +1098,7 @@ #define XY_PROBE_FEEDRATE (133*60) // Feedrate (mm/min) for the first approach when double-probing (MULTIPLE_PROBING == 2) -#define Z_PROBE_FEEDRATE_FAST (4*60) +#define Z_PROBE_FEEDRATE_FAST (6*60) // Feedrate (mm/min) for the "accurate" probe of each point #define Z_PROBE_FEEDRATE_SLOW (Z_PROBE_FEEDRATE_FAST / 2) @@ -1191,7 +1224,7 @@ // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR false -#define INVERT_Y_DIR true +#define INVERT_Y_DIR false #define INVERT_Z_DIR false // @section extruder @@ -1241,7 +1274,7 @@ #define Z_MIN_POS 0 #define X_MAX_POS X_BED_SIZE #define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 200 +#define Z_MAX_POS 170 /** * Software Endstops @@ -1595,7 +1628,7 @@ #endif // Homing speeds (mm/min) -#define HOMING_FEEDRATE_MM_M { (50*60), (50*60), (4*60) } +#define HOMING_FEEDRATE_MM_M { (50*60), (50*60), (6*60) } // Validate that endstops are triggered on homing moves #define VALIDATE_HOMING_ENDSTOPS @@ -1672,7 +1705,7 @@ * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) */ -//#define EEPROM_SETTINGS // Persistent storage with M500 and M501 +#define EEPROM_SETTINGS // Persistent storage with M500 and M501 //#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. #define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load @@ -2671,14 +2704,14 @@ * * LED Type. Enable only one of the following two options. */ -//#define RGB_LED +#define RGB_LED //#define RGBW_LED #if EITHER(RGB_LED, RGBW_LED) - //#define RGB_LED_R_PIN 34 - //#define RGB_LED_G_PIN 43 - //#define RGB_LED_B_PIN 35 - //#define RGB_LED_W_PIN -1 + #define RGB_LED_R_PIN 11 + #define RGB_LED_G_PIN 10 + #define RGB_LED_B_PIN 17 + #define RGB_LED_W_PIN -1 #endif // Support for Adafruit NeoPixel LED driver diff --git a/config/examples/Sanguinololu/Configuration_adv.h b/config/examples/Sanguinololu/Configuration_adv.h index 5335fa012a..be898986fd 100644 --- a/config/examples/Sanguinololu/Configuration_adv.h +++ b/config/examples/Sanguinololu/Configuration_adv.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Sanguinololu" + /** * Configuration_adv.h * @@ -741,7 +743,7 @@ //#define HOMING_BACKOFF_POST_MM { 2, 2, 2 } // (mm) Backoff from endstops after homing -//#define QUICK_HOME // If G28 contains XY do a diagonal move first +#define QUICK_HOME // If G28 contains XY do a diagonal move first //#define HOME_Y_BEFORE_X // If G28 contains XY home Y before X //#define HOME_Z_FIRST // Home Z first. Requires a Z-MIN endstop (not a probe). //#define CODEPENDENT_XY_HOMING // If X/Y can't home without homing Y/X first @@ -867,7 +869,7 @@ // On a 300mm bed a 5% grade would give a misalignment of ~1.5cm #define G34_MAX_GRADE 5 // (%) Maximum incline that G34 will handle - #define Z_STEPPER_ALIGN_ITERATIONS 5 // Number of iterations to apply during alignment + #define Z_STEPPER_ALIGN_ITERATIONS 3 // Number of iterations to apply during alignment #define Z_STEPPER_ALIGN_ACC 0.02 // Stop iterating early if the accuracy is better than this #define RESTORE_LEVELING_AFTER_G34 // Restore leveling after G34 is done? // After G34, re-home Z (G28 Z) or just calculate it from the last probe heights? @@ -2141,7 +2143,7 @@ * Currently handles M108, M112, M410, M876 * NOTE: Not yet implemented for all platforms. */ -//#define EMERGENCY_PARSER +#define EMERGENCY_PARSER /** * Realtime Reporting (requires EMERGENCY_PARSER) @@ -3471,7 +3473,7 @@ * - M206 and M428 are disabled. * - G92 will revert to its behavior from Marlin 1.0. */ -//#define NO_WORKSPACE_OFFSETS +#define NO_WORKSPACE_OFFSETS // Extra options for the M114 "Current Position" report //#define M114_DETAIL // Use 'M114` for details to check planner calculations diff --git a/config/examples/Sovol/SV-01/BigTreeTech SKR Mini E3 2.0/Configuration.h b/config/examples/Sovol/SV-01/BigTreeTech SKR Mini E3 2.0/Configuration.h index 78c2dc9160..63ffe9c752 100644 --- a/config/examples/Sovol/SV-01/BigTreeTech SKR Mini E3 2.0/Configuration.h +++ b/config/examples/Sovol/SV-01/BigTreeTech SKR Mini E3 2.0/Configuration.h @@ -1,6 +1,6 @@ /** * Marlin 3D Printer Firmware - * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * Copyright (c) 2021 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * * Based on Sprinter and grbl. * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Sovol/SV-01/BigTreeTech SKR Mini E3 2.0" + /** * Configuration.h * @@ -69,7 +71,7 @@ // @section info // Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes. +#define STRING_CONFIG_H_AUTHOR "(FOG_Yamato, SV-01)" // Who made the changes. //#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) /** @@ -87,10 +89,10 @@ #define SHOW_BOOTSCREEN // Show the bitmap in Marlin/_Bootscreen.h on startup. -//#define SHOW_CUSTOM_BOOTSCREEN +#define SHOW_CUSTOM_BOOTSCREEN // Show the bitmap in Marlin/_Statusscreen.h on the status screen. -//#define CUSTOM_STATUS_SCREEN_IMAGE +#define CUSTOM_STATUS_SCREEN_IMAGE // @section machine @@ -102,14 +104,14 @@ * * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] */ -#define SERIAL_PORT 0 +#define SERIAL_PORT 2 /** * Select a secondary serial port on the board to use for communication with the host. * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] */ -//#define SERIAL_PORT_2 -1 +#define SERIAL_PORT_2 -1 /** * Select a third serial port on the board to use for communication with the host. @@ -127,18 +129,18 @@ * * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ -#define BAUDRATE 250000 +#define BAUDRATE 115200 // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH // Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_RAMPS_14_EFB + #define MOTHERBOARD BOARD_BTT_SKR_MINI_E3_V2_0 #endif // Name displayed in the LCD "Ready" message and Info menu -//#define CUSTOM_MACHINE_NAME "3D Printer" +#define CUSTOM_MACHINE_NAME "SOVOL SV01" // Printer's unique ID, used by some programs to differentiate between machines. // Choose your own or use a service like https://www.uuidgenerator.net/version4 @@ -319,7 +321,7 @@ * Specify whether the power supply is active HIGH or active LOW. */ //#define PSU_CONTROL -//#define PSU_NAME "Power Supply" +#define PSU_NAME "MEAN WELL" #if ENABLED(PSU_CONTROL) #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box @@ -424,7 +426,7 @@ #define TEMP_SENSOR_5 0 #define TEMP_SENSOR_6 0 #define TEMP_SENSOR_7 0 -#define TEMP_SENSOR_BED 0 +#define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 #define TEMP_SENSOR_COOLER 0 @@ -445,8 +447,8 @@ #define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10 #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 -#define TEMP_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target +#define TEMP_WINDOW 2 // (°C) Temperature proximity for the "temperature reached" timer +#define TEMP_HYSTERESIS 4 // (°C) Temperature proximity considered "close enough" to the target #define TEMP_BED_RESIDENCY_TIME 10 // (seconds) Time to wait for bed to "settle" in M190 #define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer @@ -480,7 +482,7 @@ #define HEATER_5_MAXTEMP 275 #define HEATER_6_MAXTEMP 275 #define HEATER_7_MAXTEMP 275 -#define BED_MAXTEMP 150 +#define BED_MAXTEMP 125 #define CHAMBER_MAXTEMP 60 /** @@ -510,16 +512,17 @@ //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) // Set/get with gcode: M301 E[extruder number, 0-2] + // Sovol SV-01 #if ENABLED(PID_PARAMS_PER_HOTEND) // Specify between 1 and HOTENDS values per array. // If fewer than EXTRUDER values are provided, the last element will be repeated. - #define DEFAULT_Kp_LIST { 22.20, 22.20 } - #define DEFAULT_Ki_LIST { 1.08, 1.08 } - #define DEFAULT_Kd_LIST { 114.00, 114.00 } + #define DEFAULT_Kp_LIST { 29.76, 29.76 } + #define DEFAULT_Ki_LIST { 2.93, 2.93 } + #define DEFAULT_Kd_LIST { 75.58, 75.58 } #else - #define DEFAULT_Kp 22.20 - #define DEFAULT_Ki 1.08 - #define DEFAULT_Kd 114.00 + #define DEFAULT_Kp 29.76 + #define DEFAULT_Ki 2.93 + #define DEFAULT_Kd 75.58 #endif #endif // PIDTEMP @@ -558,9 +561,9 @@ // 120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) // from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) - #define DEFAULT_bedKp 10.00 - #define DEFAULT_bedKi .023 - #define DEFAULT_bedKd 305.4 + #define DEFAULT_bedKp 70.99 + #define DEFAULT_bedKi 3.39 + #define DEFAULT_bedKd 372.19 // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. #endif // PIDTEMPBED @@ -743,15 +746,15 @@ * TMC5130, TMC5130_STANDALONE, TMC5160, TMC5160_STANDALONE * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'L6474', 'POWERSTEP01', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2160', 'TMC2160_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC2209', 'TMC2209_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE', 'TMC5160', 'TMC5160_STANDALONE'] */ -#define X_DRIVER_TYPE A4988 -#define Y_DRIVER_TYPE A4988 -#define Z_DRIVER_TYPE A4988 +#define X_DRIVER_TYPE TMC2209 +#define Y_DRIVER_TYPE TMC2209 +#define Z_DRIVER_TYPE TMC2209 //#define X2_DRIVER_TYPE A4988 //#define Y2_DRIVER_TYPE A4988 //#define Z2_DRIVER_TYPE A4988 //#define Z3_DRIVER_TYPE A4988 //#define Z4_DRIVER_TYPE A4988 -#define E0_DRIVER_TYPE A4988 +#define E0_DRIVER_TYPE TMC2209 //#define E1_DRIVER_TYPE A4988 //#define E2_DRIVER_TYPE A4988 //#define E3_DRIVER_TYPE A4988 @@ -806,14 +809,14 @@ * Override with M92 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 500 } +#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 415 } /** * Default Max Feed Rate (mm/s) * Override with M203 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 } +#define DEFAULT_MAX_FEEDRATE { 500, 500, 5, 25 } //#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 #if ENABLED(LIMITED_MAX_FR_EDITING) @@ -826,7 +829,7 @@ * Override with M201 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 } +#define DEFAULT_MAX_ACCELERATION { 500, 500, 100, 1000 } //#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 #if ENABLED(LIMITED_MAX_ACCEL_EDITING) @@ -841,9 +844,9 @@ * M204 R Retract Acceleration * M204 T Travel Acceleration */ -#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves +#define DEFAULT_ACCELERATION 500 // X, Y, Z and E acceleration for printing moves +#define DEFAULT_RETRACT_ACCELERATION 500 // E acceleration for retracts +#define DEFAULT_TRAVEL_ACCELERATION 1000 // X, Y, Z acceleration for travel (non printing) moves /** * Default Jerk limits (mm/s) @@ -1055,14 +1058,14 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +#define NOZZLE_TO_PROBE_OFFSET { -28, 0, 0 } // Most probes should stay away from the edges of the bed, but // with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed (mm/min) between probes -#define XY_PROBE_FEEDRATE (133*60) +#define XY_PROBE_FEEDRATE (50*60) // Feedrate (mm/min) for the first approach when double-probing (MULTIPLE_PROBING == 2) #define Z_PROBE_FEEDRATE_FAST (4*60) @@ -1106,7 +1109,7 @@ * A total of 2 does fast/slow probes with a weighted average. * A total of 3 or more adds more slow probes, taking the average. */ -//#define MULTIPLE_PROBING 2 +#define MULTIPLE_PROBING 2 //#define EXTRA_PROBING 1 /** @@ -1190,7 +1193,7 @@ // @section machine // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR false +#define INVERT_X_DIR true #define INVERT_Y_DIR true #define INVERT_Z_DIR false @@ -1232,8 +1235,8 @@ // @section machine // The size of the printable area -#define X_BED_SIZE 200 -#define Y_BED_SIZE 200 +#define X_BED_SIZE 290 +#define Y_BED_SIZE 250 // Travel limits (mm) after homing, corresponding to endstop positions. #define X_MIN_POS 0 @@ -1241,7 +1244,7 @@ #define Z_MIN_POS 0 #define X_MAX_POS X_BED_SIZE #define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 200 +#define Z_MAX_POS 310 /** * Software Endstops @@ -1285,7 +1288,7 @@ * RAMPS-based boards use SERVO3_PIN for the first runout sensor. * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. */ -//#define FILAMENT_RUNOUT_SENSOR +#define FILAMENT_RUNOUT_SENSOR #if ENABLED(FILAMENT_RUNOUT_SENSOR) #define FIL_RUNOUT_ENABLED_DEFAULT true // Enable the sensor on startup. Override with M412 followed by M500. #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. @@ -1490,7 +1493,7 @@ #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - //#define UBL_HILBERT_CURVE // Use Hilbert distribution for less travel when probing multiple points + //#define UBL_HILBERT_CURVE // Use Hilbert distribution for less travel when probing multiple points #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 @@ -1565,7 +1568,7 @@ * Commands to execute at the end of G29 probing. * Useful to retract or move the Z probe out of the way. */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" +#define Z_PROBE_END_SCRIPT "G1 X173 Y125 F3000\nG1 Z0 F240" // @section homing @@ -1672,7 +1675,7 @@ * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) */ -//#define EEPROM_SETTINGS // Persistent storage with M500 and M501 +#define EEPROM_SETTINGS // Persistent storage with M500 and M501 //#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. #define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load @@ -1728,7 +1731,7 @@ * P1 Raise the nozzle always to Z-park height. * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. */ -//#define NOZZLE_PARK_FEATURE +#define NOZZLE_PARK_FEATURE #if ENABLED(NOZZLE_PARK_FEATURE) // Specify a park position as { X, Y, Z_raise } @@ -1921,7 +1924,7 @@ * * :['JAPANESE', 'WESTERN', 'CYRILLIC'] */ -#define DISPLAY_CHARSET_HD44780 JAPANESE +#define DISPLAY_CHARSET_HD44780 WESTERN /** * Info Screen Style (0:Classic, 1:Průša) @@ -1936,7 +1939,7 @@ * SD Card support is disabled by default. If your controller has an SD slot, * you must uncomment the following option or it won't work. */ -//#define SDSUPPORT +#define SDSUPPORT /** * SD CARD: ENABLE CRC @@ -2287,7 +2290,7 @@ // This is RAMPS-compatible using a single 10-pin connector. // (For CR-10 owners who want to replace the Melzi Creality board but retain the display) // -//#define CR10_STOCKDISPLAY +#define CR10_STOCKDISPLAY // // Ender-2 OEM display, a variant of the MKS_MINI_12864 diff --git a/config/examples/Sovol/SV-01/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h b/config/examples/Sovol/SV-01/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h index 5335fa012a..51c616fc22 100644 --- a/config/examples/Sovol/SV-01/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h +++ b/config/examples/Sovol/SV-01/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h @@ -1,6 +1,6 @@ /** * Marlin 3D Printer Firmware - * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * Copyright (c) 2021 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * * Based on Sprinter and grbl. * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Sovol/SV-01/BigTreeTech SKR Mini E3 2.0" + /** * Configuration_adv.h * @@ -461,7 +463,7 @@ * The fan turns on automatically whenever any driver is enabled and turns * off (or reduces to idle speed) shortly after drivers are turned off. */ -//#define USE_CONTROLLER_FAN +#define USE_CONTROLLER_FAN #if ENABLED(USE_CONTROLLER_FAN) //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan //#define CONTROLLER_FAN_USE_Z_ONLY // With this option only the Z axis is considered @@ -470,7 +472,7 @@ #define CONTROLLERFAN_SPEED_ACTIVE 255 // (0-255) Active speed, used when any motor is enabled #define CONTROLLERFAN_SPEED_IDLE 0 // (0-255) Idle speed, used when motors are disabled #define CONTROLLERFAN_IDLE_TIME 60 // (seconds) Extra time to keep the fan running after disabling motors - //#define CONTROLLER_FAN_EDITABLE // Enable M710 configurable settings + #define CONTROLLER_FAN_EDITABLE // Enable M710 configurable settings #if ENABLED(CONTROLLER_FAN_EDITABLE) #define CONTROLLER_FAN_MENU // Enable the Controller Fan submenu #endif @@ -1175,7 +1177,7 @@ #endif // Include a page of printer information in the LCD Main Menu - //#define LCD_INFO_MENU + #define LCD_INFO_MENU #if ENABLED(LCD_INFO_MENU) //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages #endif @@ -1229,13 +1231,13 @@ #endif // Scroll a longer status message into view - //#define STATUS_MESSAGE_SCROLLING + #define STATUS_MESSAGE_SCROLLING // On the Info Screen, display XY with one decimal place when possible - //#define LCD_DECIMAL_SMALL_XY + #define LCD_DECIMAL_SMALL_XY // Add an 'M73' G-code to set the current percentage - //#define LCD_SET_PROGRESS_MANUALLY + #define LCD_SET_PROGRESS_MANUALLY // Show the E position (filament used) during printing //#define LCD_SHOW_E_TOTAL @@ -1315,7 +1317,7 @@ * an option on the LCD screen to continue the print from the last-known * point in the file. */ - //#define POWER_LOSS_RECOVERY + #define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) //#define BACKUP_POWER_SUPPLY // Backup power / UPS to move the steppers on power loss @@ -1329,7 +1331,7 @@ // Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card, // especially with "vase mode" printing. Set too high and vases cannot be continued. - #define POWER_LOSS_MIN_Z_CHANGE 0.05 // (mm) Minimum Z change before saving power-loss data + #define POWER_LOSS_MIN_Z_CHANGE 2 // (mm) Minimum Z change before saving power-loss data // Enable if Z homing is needed for proper recovery. 99.9% of the time this should be disabled! //#define POWER_LOSS_RECOVER_ZHOME @@ -1361,7 +1363,7 @@ * - SDSORT_CACHE_NAMES will retain the sorted file listing in RAM. (Expensive!) * - SDSORT_DYNAMIC_RAM only uses RAM when the SD menu is visible. (Use with caution!) */ - //#define SDCARD_SORT_ALPHA + #define SDCARD_SORT_ALPHA // SD Card Sorting options #if ENABLED(SDCARD_SORT_ALPHA) @@ -1381,10 +1383,10 @@ //#define UTF_FILENAME_SUPPORT // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT + #define LONG_FILENAME_HOST_SUPPORT // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES + #define SCROLL_LONG_FILENAMES // Leave the heaters on after Stop Print (not recommended!) //#define SD_ABORT_NO_COOLDOWN @@ -1790,7 +1792,7 @@ * * Warning: Does not respect endstops! */ -//#define BABYSTEPPING +#define BABYSTEPPING #if ENABLED(BABYSTEPPING) //#define INTEGRATED_BABYSTEPPING // EXPERIMENTAL integration of babystepping into the Stepper ISR //#define BABYSTEP_WITHOUT_HOMING @@ -1837,7 +1839,7 @@ * * See https://marlinfw.org/docs/features/lin_advance.html for full instructions. */ -//#define LIN_ADVANCE +#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) //#define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed @@ -2141,7 +2143,7 @@ * Currently handles M108, M112, M410, M876 * NOTE: Not yet implemented for all platforms. */ -//#define EMERGENCY_PARSER +#define EMERGENCY_PARSER /** * Realtime Reporting (requires EMERGENCY_PARSER) @@ -2177,7 +2179,7 @@ #define SERIAL_OVERRUN_PROTECTION // For serial echo, the number of digits after the decimal point -//#define SERIAL_FLOAT_PRECISION 4 +#define SERIAL_FLOAT_PRECISION 4 // @section extras @@ -2204,7 +2206,7 @@ * * Note that M207 / M208 / M209 settings are saved to EEPROM. */ -//#define FWRETRACT +#define FWRETRACT #if ENABLED(FWRETRACT) #define FWRETRACT_AUTORETRACT // Override slicer retractions #if ENABLED(FWRETRACT_AUTORETRACT) @@ -2311,7 +2313,7 @@ * * Enable PARK_HEAD_ON_PAUSE to add the G-code M125 Pause and Park. */ -//#define ADVANCED_PAUSE_FEATURE +#define ADVANCED_PAUSE_FEATURE #if ENABLED(ADVANCED_PAUSE_FEATURE) #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. @@ -2839,7 +2841,7 @@ * Beta feature! * Create a 50/50 square wave step pulse optimal for stepper drivers. */ - //#define SQUARE_WAVE_STEPPING + #define SQUARE_WAVE_STEPPING /** * Enable M122 debugging command for TMC stepper drivers. @@ -3434,7 +3436,7 @@ * Add the M16 G-code to compare a string to the MACHINE_NAME. * M16 with a non-matching string causes the printer to halt. */ -//#define EXPECTED_PRINTER_CHECK +#define EXPECTED_PRINTER_CHECK /** * Disable all Volumetric extrusion options @@ -3474,11 +3476,11 @@ //#define NO_WORKSPACE_OFFSETS // Extra options for the M114 "Current Position" report -//#define M114_DETAIL // Use 'M114` for details to check planner calculations +#define M114_DETAIL // Use 'M114` for details to check planner calculations //#define M114_REALTIME // Real current position based on forward kinematics //#define M114_LEGACY // M114 used to synchronize on every call. Enable if needed. -//#define REPORT_FAN_CHANGE // Report the new fan speed when changed by M106 (and others) +#define REPORT_FAN_CHANGE // Report the new fan speed when changed by M106 (and others) /** * Set the number of proportional font spaces required to fill up a typical character space. diff --git a/config/examples/Sovol/SV-01/CrealityV22/Configuration.h b/config/examples/Sovol/SV-01/CrealityV22/Configuration.h index 78c2dc9160..abcba3fe99 100644 --- a/config/examples/Sovol/SV-01/CrealityV22/Configuration.h +++ b/config/examples/Sovol/SV-01/CrealityV22/Configuration.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Sovol/SV-01/CrealityV22" + /** * Configuration.h * @@ -69,7 +71,7 @@ // @section info // Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes. +#define STRING_CONFIG_H_AUTHOR "(Sovol, SV-01)" // Who made the changes. //#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) /** @@ -87,10 +89,10 @@ #define SHOW_BOOTSCREEN // Show the bitmap in Marlin/_Bootscreen.h on startup. -//#define SHOW_CUSTOM_BOOTSCREEN +#define SHOW_CUSTOM_BOOTSCREEN // Show the bitmap in Marlin/_Statusscreen.h on the status screen. -//#define CUSTOM_STATUS_SCREEN_IMAGE +#define CUSTOM_STATUS_SCREEN_IMAGE // @section machine @@ -127,7 +129,7 @@ * * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ -#define BAUDRATE 250000 +#define BAUDRATE 115200 // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH @@ -138,7 +140,7 @@ #endif // Name displayed in the LCD "Ready" message and Info menu -//#define CUSTOM_MACHINE_NAME "3D Printer" +#define CUSTOM_MACHINE_NAME "SOVOL SV01" // Printer's unique ID, used by some programs to differentiate between machines. // Choose your own or use a service like https://www.uuidgenerator.net/version4 @@ -319,7 +321,7 @@ * Specify whether the power supply is active HIGH or active LOW. */ //#define PSU_CONTROL -//#define PSU_NAME "Power Supply" +#define PSU_NAME "MEAN WELL" #if ENABLED(PSU_CONTROL) #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box @@ -424,7 +426,7 @@ #define TEMP_SENSOR_5 0 #define TEMP_SENSOR_6 0 #define TEMP_SENSOR_7 0 -#define TEMP_SENSOR_BED 0 +#define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 #define TEMP_SENSOR_COOLER 0 @@ -445,8 +447,8 @@ #define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10 #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 -#define TEMP_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target +#define TEMP_WINDOW 2 // (°C) Temperature proximity for the "temperature reached" timer +#define TEMP_HYSTERESIS 4 // (°C) Temperature proximity considered "close enough" to the target #define TEMP_BED_RESIDENCY_TIME 10 // (seconds) Time to wait for bed to "settle" in M190 #define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer @@ -480,7 +482,7 @@ #define HEATER_5_MAXTEMP 275 #define HEATER_6_MAXTEMP 275 #define HEATER_7_MAXTEMP 275 -#define BED_MAXTEMP 150 +#define BED_MAXTEMP 125 #define CHAMBER_MAXTEMP 60 /** @@ -510,16 +512,17 @@ //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) // Set/get with gcode: M301 E[extruder number, 0-2] + // Sovol SV-01 #if ENABLED(PID_PARAMS_PER_HOTEND) // Specify between 1 and HOTENDS values per array. // If fewer than EXTRUDER values are provided, the last element will be repeated. - #define DEFAULT_Kp_LIST { 22.20, 22.20 } - #define DEFAULT_Ki_LIST { 1.08, 1.08 } - #define DEFAULT_Kd_LIST { 114.00, 114.00 } + #define DEFAULT_Kp_LIST { 29.76, 29.76 } + #define DEFAULT_Ki_LIST { 2.93, 2.93 } + #define DEFAULT_Kd_LIST { 75.58, 75.58 } #else - #define DEFAULT_Kp 22.20 - #define DEFAULT_Ki 1.08 - #define DEFAULT_Kd 114.00 + #define DEFAULT_Kp 29.76 + #define DEFAULT_Ki 2.93 + #define DEFAULT_Kd 75.58 #endif #endif // PIDTEMP @@ -558,9 +561,9 @@ // 120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) // from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) - #define DEFAULT_bedKp 10.00 - #define DEFAULT_bedKi .023 - #define DEFAULT_bedKd 305.4 + #define DEFAULT_bedKp 70.99 + #define DEFAULT_bedKi 3.39 + #define DEFAULT_bedKd 372.19 // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. #endif // PIDTEMPBED @@ -655,7 +658,7 @@ #define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders #define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed -#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber +//#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber #define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling //=========================================================================== @@ -806,14 +809,14 @@ * Override with M92 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 500 } +#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 415 } /** * Default Max Feed Rate (mm/s) * Override with M203 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 } +#define DEFAULT_MAX_FEEDRATE { 500, 500, 5, 25 } //#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 #if ENABLED(LIMITED_MAX_FR_EDITING) @@ -826,7 +829,7 @@ * Override with M201 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 } +#define DEFAULT_MAX_ACCELERATION { 500, 500, 100, 1000 } //#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 #if ENABLED(LIMITED_MAX_ACCEL_EDITING) @@ -841,9 +844,9 @@ * M204 R Retract Acceleration * M204 T Travel Acceleration */ -#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves +#define DEFAULT_ACCELERATION 500 // X, Y, Z and E acceleration for printing moves +#define DEFAULT_RETRACT_ACCELERATION 500 // E acceleration for retracts +#define DEFAULT_TRAVEL_ACCELERATION 1000 // X, Y, Z acceleration for travel (non printing) moves /** * Default Jerk limits (mm/s) @@ -857,13 +860,13 @@ #if ENABLED(CLASSIC_JERK) #define DEFAULT_XJERK 10.0 #define DEFAULT_YJERK 10.0 - #define DEFAULT_ZJERK 0.3 + #define DEFAULT_ZJERK 0.4 //#define TRAVEL_EXTRA_XYJERK 0.0 // Additional jerk allowance for all travel moves //#define LIMITED_JERK_EDITING // Limit edit via M205 or LCD to DEFAULT_aJERK * 2 #if ENABLED(LIMITED_JERK_EDITING) - #define MAX_JERK_EDIT_VALUES { 20, 20, 0.6, 10 } // ...or, set your own edit limits + #define MAX_JERK_EDIT_VALUES { 20, 20, 0.8, 10 } // ...or, set your own edit limits #endif #endif @@ -877,7 +880,7 @@ * https://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html */ #if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.013 // (mm) Distance from real junction edge + #define JUNCTION_DEVIATION_MM 0.08 // (mm) Distance from real junction edge #define JD_HANDLE_SMALL_SEGMENTS // Use curvature estimation instead of just the junction angle // for small segments (< 1mm) with large junction angles (> 135°). #endif @@ -1055,14 +1058,14 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +#define NOZZLE_TO_PROBE_OFFSET { -28, 0, 0 } // Most probes should stay away from the edges of the bed, but // with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed (mm/min) between probes -#define XY_PROBE_FEEDRATE (133*60) +#define XY_PROBE_FEEDRATE (50*60) // Feedrate (mm/min) for the first approach when double-probing (MULTIPLE_PROBING == 2) #define Z_PROBE_FEEDRATE_FAST (4*60) @@ -1106,7 +1109,7 @@ * A total of 2 does fast/slow probes with a weighted average. * A total of 3 or more adds more slow probes, taking the average. */ -//#define MULTIPLE_PROBING 2 +#define MULTIPLE_PROBING 2 //#define EXTRA_PROBING 1 /** @@ -1191,13 +1194,13 @@ // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR false -#define INVERT_Y_DIR true -#define INVERT_Z_DIR false +#define INVERT_Y_DIR false +#define INVERT_Z_DIR true // @section extruder // For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR false +#define INVERT_E0_DIR true #define INVERT_E1_DIR false #define INVERT_E2_DIR false #define INVERT_E3_DIR false @@ -1232,8 +1235,8 @@ // @section machine // The size of the printable area -#define X_BED_SIZE 200 -#define Y_BED_SIZE 200 +#define X_BED_SIZE 290 +#define Y_BED_SIZE 250 // Travel limits (mm) after homing, corresponding to endstop positions. #define X_MIN_POS 0 @@ -1241,7 +1244,7 @@ #define Z_MIN_POS 0 #define X_MAX_POS X_BED_SIZE #define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 200 +#define Z_MAX_POS 310 /** * Software Endstops @@ -1285,7 +1288,7 @@ * RAMPS-based boards use SERVO3_PIN for the first runout sensor. * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. */ -//#define FILAMENT_RUNOUT_SENSOR +#define FILAMENT_RUNOUT_SENSOR #if ENABLED(FILAMENT_RUNOUT_SENSOR) #define FIL_RUNOUT_ENABLED_DEFAULT true // Enable the sensor on startup. Override with M412 followed by M500. #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. @@ -1527,7 +1530,7 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS +#define LEVEL_BED_CORNERS #if ENABLED(LEVEL_BED_CORNERS) #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets @@ -1565,7 +1568,7 @@ * Commands to execute at the end of G29 probing. * Useful to retract or move the Z probe out of the way. */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" +#define Z_PROBE_END_SCRIPT "G1 X173 Y125 F3000\nG1 Z0 F240" // @section homing @@ -1672,7 +1675,7 @@ * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) */ -//#define EEPROM_SETTINGS // Persistent storage with M500 and M501 +#define EEPROM_SETTINGS // Persistent storage with M500 and M501 //#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. #define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load @@ -1706,16 +1709,16 @@ // Preheat Constants - Up to 5 are supported without changes // #define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 180 -#define PREHEAT_1_TEMP_BED 70 +#define PREHEAT_1_TEMP_HOTEND 190 +#define PREHEAT_1_TEMP_BED 45 #define PREHEAT_1_TEMP_CHAMBER 35 -#define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 +#define PREHEAT_1_FAN_SPEED 255 // Value from 0 to 255 #define PREHEAT_2_LABEL "ABS" #define PREHEAT_2_TEMP_HOTEND 240 -#define PREHEAT_2_TEMP_BED 110 +#define PREHEAT_2_TEMP_BED 70 #define PREHEAT_2_TEMP_CHAMBER 35 -#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 +#define PREHEAT_2_FAN_SPEED 255 // Value from 0 to 255 /** * Nozzle Park @@ -1728,7 +1731,7 @@ * P1 Raise the nozzle always to Z-park height. * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. */ -//#define NOZZLE_PARK_FEATURE +#define NOZZLE_PARK_FEATURE #if ENABLED(NOZZLE_PARK_FEATURE) // Specify a park position as { X, Y, Z_raise } @@ -1921,7 +1924,7 @@ * * :['JAPANESE', 'WESTERN', 'CYRILLIC'] */ -#define DISPLAY_CHARSET_HD44780 JAPANESE +#define DISPLAY_CHARSET_HD44780 WESTERN /** * Info Screen Style (0:Classic, 1:Průša) @@ -1936,7 +1939,7 @@ * SD Card support is disabled by default. If your controller has an SD slot, * you must uncomment the following option or it won't work. */ -//#define SDSUPPORT +#define SDSUPPORT /** * SD CARD: ENABLE CRC @@ -2014,7 +2017,7 @@ // If you have a speaker that can produce tones, enable it here. // By default Marlin assumes you have a buzzer with a fixed frequency. // -//#define SPEAKER +#define SPEAKER // // The duration and frequency for the UI feedback sound. @@ -2195,7 +2198,7 @@ // RepRapDiscount FULL GRAPHIC Smart Controller // https://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller // -//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER +#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER // // K.3D Full Graphic Smart Controller diff --git a/config/examples/Sovol/SV-01/CrealityV22/Configuration_adv.h b/config/examples/Sovol/SV-01/CrealityV22/Configuration_adv.h index 5335fa012a..6b40f5ece6 100644 --- a/config/examples/Sovol/SV-01/CrealityV22/Configuration_adv.h +++ b/config/examples/Sovol/SV-01/CrealityV22/Configuration_adv.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Sovol/SV-01/CrealityV22" + /** * Configuration_adv.h * @@ -238,7 +240,7 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds + #define THERMAL_PROTECTION_PERIOD 60 // Seconds #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius //#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops @@ -258,7 +260,7 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 20 // Seconds + #define WATCH_TEMP_PERIOD 40 // Seconds #define WATCH_TEMP_INCREASE 2 // Degrees Celsius #endif @@ -266,7 +268,7 @@ * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_BED_PERIOD 60 // Seconds #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius /** @@ -867,7 +869,7 @@ // On a 300mm bed a 5% grade would give a misalignment of ~1.5cm #define G34_MAX_GRADE 5 // (%) Maximum incline that G34 will handle - #define Z_STEPPER_ALIGN_ITERATIONS 5 // Number of iterations to apply during alignment + #define Z_STEPPER_ALIGN_ITERATIONS 3 // Number of iterations to apply during alignment #define Z_STEPPER_ALIGN_ACC 0.02 // Stop iterating early if the accuracy is better than this #define RESTORE_LEVELING_AFTER_G34 // Restore leveling after G34 is done? // After G34, re-home Z (G28 Z) or just calculate it from the last probe heights? @@ -1175,7 +1177,7 @@ #endif // Include a page of printer information in the LCD Main Menu - //#define LCD_INFO_MENU + #define LCD_INFO_MENU #if ENABLED(LCD_INFO_MENU) //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages #endif @@ -1229,7 +1231,7 @@ #endif // Scroll a longer status message into view - //#define STATUS_MESSAGE_SCROLLING + #define STATUS_MESSAGE_SCROLLING // On the Info Screen, display XY with one decimal place when possible //#define LCD_DECIMAL_SMALL_XY @@ -1315,13 +1317,13 @@ * an option on the LCD screen to continue the print from the last-known * point in the file. */ - //#define POWER_LOSS_RECOVERY + #define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) //#define BACKUP_POWER_SUPPLY // Backup power / UPS to move the steppers on power loss //#define POWER_LOSS_ZRAISE 2 // (mm) Z axis raise on resume (on power loss with UPS) //#define POWER_LOSS_PIN 44 // Pin to detect power loss. Set to -1 to disable default pin on boards without module. - //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss + //#define POWER_LOSS_STATE LOW // State of pin indicating power loss //#define POWER_LOSS_PULLUP // Set pullup / pulldown as appropriate for your sensor //#define POWER_LOSS_PULLDOWN //#define POWER_LOSS_PURGE_LEN 20 // (mm) Length of filament to purge on resume @@ -1329,7 +1331,7 @@ // Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card, // especially with "vase mode" printing. Set too high and vases cannot be continued. - #define POWER_LOSS_MIN_Z_CHANGE 0.05 // (mm) Minimum Z change before saving power-loss data + #define POWER_LOSS_MIN_Z_CHANGE 2.00 // (mm) Minimum Z change before saving power-loss data // Enable if Z homing is needed for proper recovery. 99.9% of the time this should be disabled! //#define POWER_LOSS_RECOVER_ZHOME @@ -1381,10 +1383,10 @@ //#define UTF_FILENAME_SUPPORT // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT + #define LONG_FILENAME_HOST_SUPPORT // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES + #define SCROLL_LONG_FILENAMES // Leave the heaters on after Stop Print (not recommended!) //#define SD_ABORT_NO_COOLDOWN @@ -1512,7 +1514,7 @@ */ #if HAS_MARLINUI_U8GLIB // Show SD percentage next to the progress bar - //#define DOGM_SD_PERCENT + #define DOGM_SD_PERCENT // Save many cycles by drawing a hollow frame or no frame on the Info Screen //#define XYZ_NO_FRAME @@ -1790,7 +1792,7 @@ * * Warning: Does not respect endstops! */ -//#define BABYSTEPPING +#define BABYSTEPPING #if ENABLED(BABYSTEPPING) //#define INTEGRATED_BABYSTEPPING // EXPERIMENTAL integration of babystepping into the Stepper ISR //#define BABYSTEP_WITHOUT_HOMING @@ -1801,7 +1803,7 @@ #define BABYSTEP_MULTIPLICATOR_Z 1 // (steps or mm) Steps or millimeter distance for each Z babystep #define BABYSTEP_MULTIPLICATOR_XY 1 // (steps or mm) Steps or millimeter distance for each XY babystep - //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. + #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. // Note: Extra time may be added to mitigate controller latency. @@ -1861,8 +1863,6 @@ #endif /** - * Probing Margins - * * Override PROBING_MARGIN for each side of the build plate * Useful to get probe points to exact positions on targets or * to allow leveling to avoid plate clamps on only specific @@ -2204,7 +2204,7 @@ * * Note that M207 / M208 / M209 settings are saved to EEPROM. */ -//#define FWRETRACT +#define FWRETRACT #if ENABLED(FWRETRACT) #define FWRETRACT_AUTORETRACT // Override slicer retractions #if ENABLED(FWRETRACT_AUTORETRACT) @@ -2311,27 +2311,27 @@ * * Enable PARK_HEAD_ON_PAUSE to add the G-code M125 Pause and Park. */ -//#define ADVANCED_PAUSE_FEATURE +#define ADVANCED_PAUSE_FEATURE #if ENABLED(ADVANCED_PAUSE_FEATURE) - #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. - #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. + #define PAUSE_PARK_RETRACT_FEEDRATE 3 // (mm/s) Initial retract feedrate. + #define PAUSE_PARK_RETRACT_LENGTH 4 // (mm) Initial retract. // This short retract is done immediately, before parking the nozzle. - #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast. + #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 3 // (mm/s) Unload filament feedrate. This can be pretty fast. #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. #define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload. // For Bowden, the full length of the tube and nozzle. // For direct drive, the full length of the nozzle. // Set to 0 for manual unloading. - #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE 6 // (mm/s) Slow move when starting load. + #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE 3 // (mm/s) Slow move when starting load. #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 0 // (mm) Slow length, to allow time to insert material. // 0 to disable start loading and skip to fast load only - #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast. + #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 3 // (mm/s) Load filament feedrate. This can be pretty fast. #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle. // For Bowden, the full length of the tube and nozzle. // For direct drive, the full length of the nozzle. //#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted. - #define ADVANCED_PAUSE_PURGE_FEEDRATE 3 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate. + #define ADVANCED_PAUSE_PURGE_FEEDRATE 2 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate. #define ADVANCED_PAUSE_PURGE_LENGTH 50 // (mm) Length to extrude after loading. // Set to 0 for manual extrusion. // Filament can be extruded repeatedly from the Filament Change menu @@ -2341,7 +2341,7 @@ // Filament Unload does a Retract, Delay, and Purge first: #define FILAMENT_UNLOAD_PURGE_RETRACT 13 // (mm) Unload initial retract length. - #define FILAMENT_UNLOAD_PURGE_DELAY 5000 // (ms) Delay for the filament to cool after retract. + #define FILAMENT_UNLOAD_PURGE_DELAY 3000 // (ms) Delay for the filament to cool after retract. #define FILAMENT_UNLOAD_PURGE_LENGTH 8 // (mm) An unretract is done, then this length is purged. #define FILAMENT_UNLOAD_PURGE_FEEDRATE 25 // (mm/s) feedrate to purge before unload @@ -2352,8 +2352,8 @@ //#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. //#define HOME_BEFORE_FILAMENT_CHANGE // If needed, home before parking for filament change - //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. - //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) + #define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. + #define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) #endif // @section tmc @@ -3215,8 +3215,7 @@ * Each tool uses different value ranges for speed / power control. * These parameters are used to convert between tool power units and PWM. * - * Speed/Power = (PWMDC / 255 * 100 - SPEED_POWER_INTERCEPT) / SPEED_POWER_SLOPE - * PWMDC = (spdpwr - SPEED_POWER_MIN) / (SPEED_POWER_MAX - SPEED_POWER_MIN) / SPEED_POWER_SLOPE + * Set these required parameters for your controller */ #define SPEED_POWER_INTERCEPT 0 // (%) 0-100 i.e., Minimum power percentage #define SPEED_POWER_MIN 5000 // (RPM) @@ -3434,7 +3433,7 @@ * Add the M16 G-code to compare a string to the MACHINE_NAME. * M16 with a non-matching string causes the printer to halt. */ -//#define EXPECTED_PRINTER_CHECK +#define EXPECTED_PRINTER_CHECK /** * Disable all Volumetric extrusion options diff --git a/config/examples/Sovol/SV-01/CrealityV221/Configuration.h b/config/examples/Sovol/SV-01/CrealityV221/Configuration.h index 78c2dc9160..add7d33289 100644 --- a/config/examples/Sovol/SV-01/CrealityV221/Configuration.h +++ b/config/examples/Sovol/SV-01/CrealityV221/Configuration.h @@ -1,6 +1,6 @@ /** * Marlin 3D Printer Firmware - * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * Copyright (c) 2021 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * * Based on Sprinter and grbl. * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Sovol/SV-01/CrealityV221" + /** * Configuration.h * @@ -69,7 +71,7 @@ // @section info // Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes. +#define STRING_CONFIG_H_AUTHOR "(FOG_Yamato, SV-01)" // Who made the changes. //#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) /** @@ -87,10 +89,10 @@ #define SHOW_BOOTSCREEN // Show the bitmap in Marlin/_Bootscreen.h on startup. -//#define SHOW_CUSTOM_BOOTSCREEN +#define SHOW_CUSTOM_BOOTSCREEN // Show the bitmap in Marlin/_Statusscreen.h on the status screen. -//#define CUSTOM_STATUS_SCREEN_IMAGE +#define CUSTOM_STATUS_SCREEN_IMAGE // @section machine @@ -127,7 +129,7 @@ * * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ -#define BAUDRATE 250000 +#define BAUDRATE 115200 // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH @@ -138,7 +140,7 @@ #endif // Name displayed in the LCD "Ready" message and Info menu -//#define CUSTOM_MACHINE_NAME "3D Printer" +#define CUSTOM_MACHINE_NAME "SOVOL SV01" // Printer's unique ID, used by some programs to differentiate between machines. // Choose your own or use a service like https://www.uuidgenerator.net/version4 @@ -319,7 +321,7 @@ * Specify whether the power supply is active HIGH or active LOW. */ //#define PSU_CONTROL -//#define PSU_NAME "Power Supply" +#define PSU_NAME "MEAN WELL" #if ENABLED(PSU_CONTROL) #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box @@ -424,7 +426,7 @@ #define TEMP_SENSOR_5 0 #define TEMP_SENSOR_6 0 #define TEMP_SENSOR_7 0 -#define TEMP_SENSOR_BED 0 +#define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 #define TEMP_SENSOR_COOLER 0 @@ -445,8 +447,8 @@ #define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10 #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 -#define TEMP_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target +#define TEMP_WINDOW 2 // (°C) Temperature proximity for the "temperature reached" timer +#define TEMP_HYSTERESIS 4 // (°C) Temperature proximity considered "close enough" to the target #define TEMP_BED_RESIDENCY_TIME 10 // (seconds) Time to wait for bed to "settle" in M190 #define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer @@ -480,7 +482,7 @@ #define HEATER_5_MAXTEMP 275 #define HEATER_6_MAXTEMP 275 #define HEATER_7_MAXTEMP 275 -#define BED_MAXTEMP 150 +#define BED_MAXTEMP 125 #define CHAMBER_MAXTEMP 60 /** @@ -510,16 +512,17 @@ //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) // Set/get with gcode: M301 E[extruder number, 0-2] + // Sovol SV-01 #if ENABLED(PID_PARAMS_PER_HOTEND) // Specify between 1 and HOTENDS values per array. // If fewer than EXTRUDER values are provided, the last element will be repeated. - #define DEFAULT_Kp_LIST { 22.20, 22.20 } - #define DEFAULT_Ki_LIST { 1.08, 1.08 } - #define DEFAULT_Kd_LIST { 114.00, 114.00 } + #define DEFAULT_Kp_LIST { 29.76, 29.76 } + #define DEFAULT_Ki_LIST { 2.93, 2.93 } + #define DEFAULT_Kd_LIST { 75.58, 75.58 } #else - #define DEFAULT_Kp 22.20 - #define DEFAULT_Ki 1.08 - #define DEFAULT_Kd 114.00 + #define DEFAULT_Kp 29.76 + #define DEFAULT_Ki 2.93 + #define DEFAULT_Kd 75.58 #endif #endif // PIDTEMP @@ -558,9 +561,9 @@ // 120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) // from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) - #define DEFAULT_bedKp 10.00 - #define DEFAULT_bedKi .023 - #define DEFAULT_bedKd 305.4 + #define DEFAULT_bedKp 70.99 + #define DEFAULT_bedKi 3.39 + #define DEFAULT_bedKd 372.19 // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. #endif // PIDTEMPBED @@ -743,15 +746,15 @@ * TMC5130, TMC5130_STANDALONE, TMC5160, TMC5160_STANDALONE * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'L6474', 'POWERSTEP01', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2160', 'TMC2160_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC2209', 'TMC2209_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE', 'TMC5160', 'TMC5160_STANDALONE'] */ -#define X_DRIVER_TYPE A4988 -#define Y_DRIVER_TYPE A4988 -#define Z_DRIVER_TYPE A4988 +#define X_DRIVER_TYPE TMC2208_STANDALONE +#define Y_DRIVER_TYPE TMC2208_STANDALONE +#define Z_DRIVER_TYPE TMC2208_STANDALONE //#define X2_DRIVER_TYPE A4988 //#define Y2_DRIVER_TYPE A4988 //#define Z2_DRIVER_TYPE A4988 //#define Z3_DRIVER_TYPE A4988 //#define Z4_DRIVER_TYPE A4988 -#define E0_DRIVER_TYPE A4988 +#define E0_DRIVER_TYPE TMC2208_STANDALONE //#define E1_DRIVER_TYPE A4988 //#define E2_DRIVER_TYPE A4988 //#define E3_DRIVER_TYPE A4988 @@ -806,14 +809,14 @@ * Override with M92 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 500 } +#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 415 } /** * Default Max Feed Rate (mm/s) * Override with M203 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 } +#define DEFAULT_MAX_FEEDRATE { 500, 500, 5, 25 } //#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 #if ENABLED(LIMITED_MAX_FR_EDITING) @@ -826,7 +829,7 @@ * Override with M201 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 } +#define DEFAULT_MAX_ACCELERATION { 500, 500, 100, 1000 } //#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 #if ENABLED(LIMITED_MAX_ACCEL_EDITING) @@ -841,9 +844,9 @@ * M204 R Retract Acceleration * M204 T Travel Acceleration */ -#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves +#define DEFAULT_ACCELERATION 500 // X, Y, Z and E acceleration for printing moves +#define DEFAULT_RETRACT_ACCELERATION 500 // E acceleration for retracts +#define DEFAULT_TRAVEL_ACCELERATION 1000 // X, Y, Z acceleration for travel (non printing) moves /** * Default Jerk limits (mm/s) @@ -1055,14 +1058,14 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +#define NOZZLE_TO_PROBE_OFFSET { -28, 0, 0 } // Most probes should stay away from the edges of the bed, but // with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed (mm/min) between probes -#define XY_PROBE_FEEDRATE (133*60) +#define XY_PROBE_FEEDRATE (50*60) // Feedrate (mm/min) for the first approach when double-probing (MULTIPLE_PROBING == 2) #define Z_PROBE_FEEDRATE_FAST (4*60) @@ -1106,7 +1109,7 @@ * A total of 2 does fast/slow probes with a weighted average. * A total of 3 or more adds more slow probes, taking the average. */ -//#define MULTIPLE_PROBING 2 +#define MULTIPLE_PROBING 2 //#define EXTRA_PROBING 1 /** @@ -1191,13 +1194,13 @@ // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR false -#define INVERT_Y_DIR true -#define INVERT_Z_DIR false +#define INVERT_Y_DIR false +#define INVERT_Z_DIR true // @section extruder // For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR false +#define INVERT_E0_DIR true #define INVERT_E1_DIR false #define INVERT_E2_DIR false #define INVERT_E3_DIR false @@ -1232,8 +1235,8 @@ // @section machine // The size of the printable area -#define X_BED_SIZE 200 -#define Y_BED_SIZE 200 +#define X_BED_SIZE 290 +#define Y_BED_SIZE 250 // Travel limits (mm) after homing, corresponding to endstop positions. #define X_MIN_POS 0 @@ -1241,7 +1244,7 @@ #define Z_MIN_POS 0 #define X_MAX_POS X_BED_SIZE #define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 200 +#define Z_MAX_POS 310 /** * Software Endstops @@ -1285,7 +1288,7 @@ * RAMPS-based boards use SERVO3_PIN for the first runout sensor. * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. */ -//#define FILAMENT_RUNOUT_SENSOR +#define FILAMENT_RUNOUT_SENSOR #if ENABLED(FILAMENT_RUNOUT_SENSOR) #define FIL_RUNOUT_ENABLED_DEFAULT true // Enable the sensor on startup. Override with M412 followed by M500. #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. @@ -1490,7 +1493,7 @@ #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - //#define UBL_HILBERT_CURVE // Use Hilbert distribution for less travel when probing multiple points + //#define UBL_HILBERT_CURVE // Use Hilbert distribution for less travel when probing multiple points #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 @@ -1565,7 +1568,7 @@ * Commands to execute at the end of G29 probing. * Useful to retract or move the Z probe out of the way. */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" +#define Z_PROBE_END_SCRIPT "G1 X173 Y125 F3000\nG1 Z0 F240" // @section homing @@ -1672,7 +1675,7 @@ * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) */ -//#define EEPROM_SETTINGS // Persistent storage with M500 and M501 +#define EEPROM_SETTINGS // Persistent storage with M500 and M501 //#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. #define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load @@ -1728,7 +1731,7 @@ * P1 Raise the nozzle always to Z-park height. * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. */ -//#define NOZZLE_PARK_FEATURE +#define NOZZLE_PARK_FEATURE #if ENABLED(NOZZLE_PARK_FEATURE) // Specify a park position as { X, Y, Z_raise } @@ -1921,7 +1924,7 @@ * * :['JAPANESE', 'WESTERN', 'CYRILLIC'] */ -#define DISPLAY_CHARSET_HD44780 JAPANESE +#define DISPLAY_CHARSET_HD44780 WESTERN /** * Info Screen Style (0:Classic, 1:Průša) @@ -1936,7 +1939,7 @@ * SD Card support is disabled by default. If your controller has an SD slot, * you must uncomment the following option or it won't work. */ -//#define SDSUPPORT +#define SDSUPPORT /** * SD CARD: ENABLE CRC @@ -2014,7 +2017,7 @@ // If you have a speaker that can produce tones, enable it here. // By default Marlin assumes you have a buzzer with a fixed frequency. // -//#define SPEAKER +#define SPEAKER // // The duration and frequency for the UI feedback sound. @@ -2195,7 +2198,7 @@ // RepRapDiscount FULL GRAPHIC Smart Controller // https://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller // -//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER +#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER // // K.3D Full Graphic Smart Controller diff --git a/config/examples/Sovol/SV-01/CrealityV221/Configuration_adv.h b/config/examples/Sovol/SV-01/CrealityV221/Configuration_adv.h index 5335fa012a..4cb59b9251 100644 --- a/config/examples/Sovol/SV-01/CrealityV221/Configuration_adv.h +++ b/config/examples/Sovol/SV-01/CrealityV221/Configuration_adv.h @@ -1,6 +1,6 @@ /** * Marlin 3D Printer Firmware - * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * Copyright (c) 2021 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * * Based on Sprinter and grbl. * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Sovol/SV-01/CrealityV221" + /** * Configuration_adv.h * @@ -1315,7 +1317,7 @@ * an option on the LCD screen to continue the print from the last-known * point in the file. */ - //#define POWER_LOSS_RECOVERY + #define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) //#define BACKUP_POWER_SUPPLY // Backup power / UPS to move the steppers on power loss @@ -1329,7 +1331,7 @@ // Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card, // especially with "vase mode" printing. Set too high and vases cannot be continued. - #define POWER_LOSS_MIN_Z_CHANGE 0.05 // (mm) Minimum Z change before saving power-loss data + #define POWER_LOSS_MIN_Z_CHANGE 2 // (mm) Minimum Z change before saving power-loss data // Enable if Z homing is needed for proper recovery. 99.9% of the time this should be disabled! //#define POWER_LOSS_RECOVER_ZHOME @@ -1381,10 +1383,10 @@ //#define UTF_FILENAME_SUPPORT // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT + #define LONG_FILENAME_HOST_SUPPORT // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES + #define SCROLL_LONG_FILENAMES // Leave the heaters on after Stop Print (not recommended!) //#define SD_ABORT_NO_COOLDOWN @@ -1790,7 +1792,7 @@ * * Warning: Does not respect endstops! */ -//#define BABYSTEPPING +#define BABYSTEPPING #if ENABLED(BABYSTEPPING) //#define INTEGRATED_BABYSTEPPING // EXPERIMENTAL integration of babystepping into the Stepper ISR //#define BABYSTEP_WITHOUT_HOMING @@ -1861,8 +1863,6 @@ #endif /** - * Probing Margins - * * Override PROBING_MARGIN for each side of the build plate * Useful to get probe points to exact positions on targets or * to allow leveling to avoid plate clamps on only specific @@ -2204,7 +2204,7 @@ * * Note that M207 / M208 / M209 settings are saved to EEPROM. */ -//#define FWRETRACT +#define FWRETRACT #if ENABLED(FWRETRACT) #define FWRETRACT_AUTORETRACT // Override slicer retractions #if ENABLED(FWRETRACT_AUTORETRACT) @@ -2311,7 +2311,7 @@ * * Enable PARK_HEAD_ON_PAUSE to add the G-code M125 Pause and Park. */ -//#define ADVANCED_PAUSE_FEATURE +#define ADVANCED_PAUSE_FEATURE #if ENABLED(ADVANCED_PAUSE_FEATURE) #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. @@ -3215,8 +3215,7 @@ * Each tool uses different value ranges for speed / power control. * These parameters are used to convert between tool power units and PWM. * - * Speed/Power = (PWMDC / 255 * 100 - SPEED_POWER_INTERCEPT) / SPEED_POWER_SLOPE - * PWMDC = (spdpwr - SPEED_POWER_MIN) / (SPEED_POWER_MAX - SPEED_POWER_MIN) / SPEED_POWER_SLOPE + * Set these required parameters for your controller */ #define SPEED_POWER_INTERCEPT 0 // (%) 0-100 i.e., Minimum power percentage #define SPEED_POWER_MIN 5000 // (RPM) @@ -3434,7 +3433,7 @@ * Add the M16 G-code to compare a string to the MACHINE_NAME. * M16 with a non-matching string causes the printer to halt. */ -//#define EXPECTED_PRINTER_CHECK +#define EXPECTED_PRINTER_CHECK /** * Disable all Volumetric extrusion options diff --git a/config/examples/TPARA/AXEL_TPARA/Configuration.h b/config/examples/TPARA/AXEL_TPARA/Configuration.h index 78c2dc9160..f81cd86081 100644 --- a/config/examples/TPARA/AXEL_TPARA/Configuration.h +++ b/config/examples/TPARA/AXEL_TPARA/Configuration.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "TPARA/AXEL_TPARA" + /** * Configuration.h * @@ -58,14 +60,34 @@ */ //=========================================================================== -//========================== DELTA / SCARA / TPARA ========================== -//=========================================================================== -// -// Download configurations from the link above and customize for your machine. -// Examples are located in config/examples/delta, .../SCARA, and .../TPARA. -// +//============================= TPARA Printer =============================== //=========================================================================== +#define AXEL_TPARA // added AXEL_TPARA: Three PArallelogram Robot Arm +#if ENABLED(AXEL_TPARA) + #define DEBUG_ROBOT_KINEMATICS + #define ROBOT_SEGMENTS_PER_SECOND 200 + + // Length of inner and outer support arms. Measure arm lengths precisely. + #define ROBOT_LINKAGE_1 120 // (mm) + #define ROBOT_LINKAGE_2 120 // (mm) + + // SCARA tower offset (position of Tower relative to bed zero position) + // This needs to be reasonably accurate as it defines the printbed position in the SCARA space. + #define ROBOT_OFFSET_X 0 // (mm) + #define ROBOT_OFFSET_Y 0 // (mm) + #define ROBOT_OFFSET_Z 0 // (mm) + + #define SCARA_FEEDRATE_SCALING // Convert XY feedrate from mm/s to degrees/s on the fly + + // Radius around the center where the arm cannot reach + #define MIDDLE_DEAD_ZONE_R 0 // (mm) + + // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 + #define THETA_HOMING_OFFSET 0 + #define PSI_HOMING_OFFSET 0 +#endif + // @section info // Author info of this build printed to the host during boot and M115 @@ -138,7 +160,7 @@ #endif // Name displayed in the LCD "Ready" message and Info menu -//#define CUSTOM_MACHINE_NAME "3D Printer" +#define CUSTOM_MACHINE_NAME "TPARA" // Printer's unique ID, used by some programs to differentiate between machines. // Choose your own or use a service like https://www.uuidgenerator.net/version4 @@ -151,7 +173,7 @@ #define EXTRUDERS 1 // Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc. -#define DEFAULT_NOMINAL_FILAMENT_DIA 1.75 +#define DEFAULT_NOMINAL_FILAMENT_DIA 3.0 // For Cyclops or any "multi-extruder" that shares a single nozzle. //#define SINGLENOZZLE @@ -318,7 +340,7 @@ * Enable and connect the power supply to the PS_ON_PIN. * Specify whether the power supply is active HIGH or active LOW. */ -//#define PSU_CONTROL +#define PSU_CONTROL //#define PSU_NAME "Power Supply" #if ENABLED(PSU_CONTROL) @@ -444,11 +466,11 @@ //#define TEMP_SENSOR_1_AS_REDUNDANT #define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10 -#define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 +#define TEMP_RESIDENCY_TIME 3 // (seconds) Time to wait for hotend to "settle" in M109 #define TEMP_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer #define TEMP_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target -#define TEMP_BED_RESIDENCY_TIME 10 // (seconds) Time to wait for bed to "settle" in M190 +#define TEMP_BED_RESIDENCY_TIME 0 // (seconds) Time to wait for bed to "settle" in M190 #define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer #define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target @@ -481,7 +503,7 @@ #define HEATER_6_MAXTEMP 275 #define HEATER_7_MAXTEMP 275 #define BED_MAXTEMP 150 -#define CHAMBER_MAXTEMP 60 +#define CHAMBER_MAXTEMP 60 /** * Thermal Overshoot @@ -510,16 +532,17 @@ //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) // Set/get with gcode: M301 E[extruder number, 0-2] + // Merlin Hotend: From Autotune #if ENABLED(PID_PARAMS_PER_HOTEND) // Specify between 1 and HOTENDS values per array. // If fewer than EXTRUDER values are provided, the last element will be repeated. - #define DEFAULT_Kp_LIST { 22.20, 22.20 } - #define DEFAULT_Ki_LIST { 1.08, 1.08 } - #define DEFAULT_Kd_LIST { 114.00, 114.00 } + #define DEFAULT_Kp_LIST { 24.50, 24.50 } + #define DEFAULT_Ki_LIST { 1.72, 1.72 } + #define DEFAULT_Kd_LIST { 87.73, 87.73 } #else - #define DEFAULT_Kp 22.20 - #define DEFAULT_Ki 1.08 - #define DEFAULT_Kd 114.00 + #define DEFAULT_Kp 24.50 + #define DEFAULT_Ki 1.72 + #define DEFAULT_Kd 87.73 #endif #endif // PIDTEMP @@ -540,7 +563,7 @@ * heater. If your configuration is significantly different than this and you don't understand * the issues involved, don't use bed PID until someone else verifies that your hardware works. */ -//#define PIDTEMPBED +#define PIDTEMPBED //#define BED_LIMIT_SWITCHING @@ -556,11 +579,11 @@ //#define MIN_BED_POWER 0 //#define PID_BED_DEBUG // Sends debug data to the serial port. - // 120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - // from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) - #define DEFAULT_bedKp 10.00 - #define DEFAULT_bedKi .023 - #define DEFAULT_bedKd 305.4 + // 12v Heatbed Mk3 12V in parallel + // from pidautotune + #define DEFAULT_bedKp 630.14 + #define DEFAULT_bedKi 121.71 + #define DEFAULT_bedKd 815.64 // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. #endif // PIDTEMPBED @@ -613,7 +636,7 @@ //#define PID_DEBUG // Sends debug data to the serial port. Use 'M303 D' to toggle activation. //#define PID_OPENLOOP // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX //#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay - #define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature + #define PID_FUNCTIONAL_RANGE 20 // If the temperature difference between the target temperature and the actual temperature // is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max. #endif @@ -684,11 +707,11 @@ // Almost all printers will be using one per axis. Probes will use one or more of the // extra connectors. Leave undefined any used for non-endstop and non-probe purposes. #define USE_XMIN_PLUG -#define USE_YMIN_PLUG -#define USE_ZMIN_PLUG +//#define USE_YMIN_PLUG +//#define USE_ZMIN_PLUG //#define USE_XMAX_PLUG -//#define USE_YMAX_PLUG -//#define USE_ZMAX_PLUG +#define USE_YMAX_PLUG +#define USE_ZMAX_PLUG // Enable pullup for all endstops to prevent a floating state #define ENDSTOPPULLUPS @@ -696,9 +719,9 @@ // Disable ENDSTOPPULLUPS to set pullups individually //#define ENDSTOPPULLUP_XMAX //#define ENDSTOPPULLUP_YMAX - //#define ENDSTOPPULLUP_ZMAX - //#define ENDSTOPPULLUP_XMIN - //#define ENDSTOPPULLUP_YMIN + //#define ENDSTOPPULLUP_ZMAX // open pin, inverted + //#define ENDSTOPPULLUP_XMIN // open pin, inverted + //#define ENDSTOPPULLUP_YMIN // open pin, inverted //#define ENDSTOPPULLUP_ZMIN //#define ENDSTOPPULLUP_ZMIN_PROBE #endif @@ -717,13 +740,13 @@ #endif // Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define X_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_PROBE_ENDSTOP_INVERTING false // Set to true to invert the logic of the probe. +#define X_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Y_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Z_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define X_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Y_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Z_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Z_MIN_PROBE_ENDSTOP_INVERTING true // Set to true to invert the logic of the probe. /** * Stepper Drivers @@ -779,7 +802,7 @@ //#define ENDSTOP_NOISE_THRESHOLD 2 // Check for stuck or disconnected endstops during homing moves. -//#define DETECT_BROKEN_ENDSTOP +#define DETECT_BROKEN_ENDSTOP //============================================================================= //============================== Movement Settings ============================ @@ -806,14 +829,17 @@ * Override with M92 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 500 } +// TPARA uses only angles units are (steps/angle) +// 200 steps per 360 deg rev * 32 microsteps * 32:9 gear ratio +// 200/360*32*32/9 = 63.21 +#define DEFAULT_AXIS_STEPS_PER_UNIT { 63.21,63.21,63.21, 200 } // default steps per unit for SCARA /** * Default Max Feed Rate (mm/s) * Override with M203 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 } +#define DEFAULT_MAX_FEEDRATE { 500, 500, 500, 25 } //#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 #if ENABLED(LIMITED_MAX_FR_EDITING) @@ -826,7 +852,7 @@ * Override with M201 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 } +#define DEFAULT_MAX_ACCELERATION { 500, 500, 500, 1000 } //#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 #if ENABLED(LIMITED_MAX_ACCEL_EDITING) @@ -841,9 +867,9 @@ * M204 R Retract Acceleration * M204 T Travel Acceleration */ -#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves +#define DEFAULT_ACCELERATION 1000 // X, Y, Z and E acceleration for printing moves +#define DEFAULT_RETRACT_ACCELERATION 2000 // E acceleration for retracts +#define DEFAULT_TRAVEL_ACCELERATION 1000 // X, Y, Z acceleration for travel (non printing) moves /** * Default Jerk limits (mm/s) @@ -853,11 +879,11 @@ * When changing speed and direction, if the difference is less than the * value set here, it may happen instantaneously. */ -//#define CLASSIC_JERK +#define CLASSIC_JERK #if ENABLED(CLASSIC_JERK) - #define DEFAULT_XJERK 10.0 - #define DEFAULT_YJERK 10.0 - #define DEFAULT_ZJERK 0.3 + #define DEFAULT_XJERK 5.0 + #define DEFAULT_YJERK 5.0 + #define DEFAULT_ZJERK 5.0 //#define TRAVEL_EXTRA_XYJERK 0.0 // Additional jerk allowance for all travel moves @@ -867,7 +893,7 @@ #endif #endif -#define DEFAULT_EJERK 5.0 // May be used by Linear Advance +#define DEFAULT_EJERK 3.0 // May be used by Linear Advance /** * Junction Deviation Factor @@ -877,7 +903,7 @@ * https://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html */ #if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.013 // (mm) Distance from real junction edge + #define JUNCTION_DEVIATION_MM 0.025 // (mm) Distance from real junction edge #define JD_HANDLE_SMALL_SEGMENTS // Use curvature estimation instead of just the junction angle // for small segments (< 1mm) with large junction angles (> 135°). #endif @@ -1055,7 +1081,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +#define NOZZLE_TO_PROBE_OFFSET { -25, -29, -12.35 } // Most probes should stay away from the edges of the bed, but // with NOZZLE_AS_PROBE this can be negative for a wider probing area. @@ -1065,7 +1091,7 @@ #define XY_PROBE_FEEDRATE (133*60) // Feedrate (mm/min) for the first approach when double-probing (MULTIPLE_PROBING == 2) -#define Z_PROBE_FEEDRATE_FAST (4*60) +#define Z_PROBE_FEEDRATE_FAST (10*60) // Feedrate (mm/min) for the "accurate" probe of each point #define Z_PROBE_FEEDRATE_SLOW (Z_PROBE_FEEDRATE_FAST / 2) @@ -1123,7 +1149,7 @@ * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. */ -#define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow +#define Z_CLEARANCE_DEPLOY_PROBE 15 // Z Clearance for Deploy/Stow #define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points #define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes //#define Z_AFTER_PROBING 5 // Z position after probing is done @@ -1190,9 +1216,9 @@ // @section machine // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR false -#define INVERT_Y_DIR true -#define INVERT_Z_DIR false +#define INVERT_X_DIR true +#define INVERT_Y_DIR false +#define INVERT_Z_DIR true // @section extruder @@ -1224,10 +1250,12 @@ //#define Z_AFTER_HOMING 10 // (mm) Height to move to after homing Z // Direction of endstops when homing; 1=MAX, -1=MIN +// For TPARA robot, A (base),B(shoulder),C(elbow): +// A:[1=CCW, -1=CW], B & C:[1 = Decrease Radius and Up, -1=Increase Radius and up] // :[-1,1] #define X_HOME_DIR -1 -#define Y_HOME_DIR -1 -#define Z_HOME_DIR -1 +#define Y_HOME_DIR 1 +#define Z_HOME_DIR 1 // @section machine @@ -1238,10 +1266,10 @@ // Travel limits (mm) after homing, corresponding to endstop positions. #define X_MIN_POS 0 #define Y_MIN_POS 0 -#define Z_MIN_POS 0 +#define Z_MIN_POS MANUAL_Z_HOME_POS #define X_MAX_POS X_BED_SIZE #define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 200 +#define Z_MAX_POS 225 /** * Software Endstops @@ -1413,7 +1441,7 @@ * Turn on with the command 'M111 S32'. * NOTE: Requires a lot of PROGMEM! */ -//#define DEBUG_LEVELING_FEATURE +#define DEBUG_LEVELING_FEATURE #if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL, PROBE_MANUALLY) // Set a height for the start of manual adjustment @@ -1574,9 +1602,9 @@ // Manually set the home position. Leave these undefined for automatic settings. // For DELTA this is the top-center of the Cartesian print volume. -//#define MANUAL_X_HOME_POS 0 -//#define MANUAL_Y_HOME_POS 0 -//#define MANUAL_Z_HOME_POS 0 +#define MANUAL_X_HOME_POS 35 +#define MANUAL_Y_HOME_POS 0 +#define MANUAL_Z_HOME_POS 125 // Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area. // @@ -1595,7 +1623,7 @@ #endif // Homing speeds (mm/min) -#define HOMING_FEEDRATE_MM_M { (50*60), (50*60), (4*60) } +#define HOMING_FEEDRATE_MM_M { (10*60), (10*60), (10*60) } // Validate that endstops are triggered on homing moves #define VALIDATE_HOMING_ENDSTOPS @@ -1709,13 +1737,13 @@ #define PREHEAT_1_TEMP_HOTEND 180 #define PREHEAT_1_TEMP_BED 70 #define PREHEAT_1_TEMP_CHAMBER 35 -#define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 +#define PREHEAT_1_FAN_SPEED 255 // Value from 0 to 255 #define PREHEAT_2_LABEL "ABS" #define PREHEAT_2_TEMP_HOTEND 240 -#define PREHEAT_2_TEMP_BED 110 +#define PREHEAT_2_TEMP_BED 100 #define PREHEAT_2_TEMP_CHAMBER 35 -#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 +#define PREHEAT_2_FAN_SPEED 255 // Value from 0 to 255 /** * Nozzle Park diff --git a/config/examples/TPARA/AXEL_TPARA/Configuration_adv.h b/config/examples/TPARA/AXEL_TPARA/Configuration_adv.h index 5335fa012a..d20352b797 100644 --- a/config/examples/TPARA/AXEL_TPARA/Configuration_adv.h +++ b/config/examples/TPARA/AXEL_TPARA/Configuration_adv.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "TPARA/AXEL_TPARA" + /** * Configuration_adv.h * @@ -140,7 +142,7 @@ // Heated Bed Bang-Bang options // #if DISABLED(PIDTEMPBED) - #define BED_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #define BED_CHECK_INTERVAL 3000 // (ms) Interval between checks in bang-bang control #if ENABLED(BED_LIMIT_SWITCHING) #define BED_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > BED_HYSTERESIS #endif @@ -429,7 +431,7 @@ #if ENABLED(EXTRUDER_RUNOUT_PREVENT) #define EXTRUDER_RUNOUT_MINTEMP 190 #define EXTRUDER_RUNOUT_SECONDS 30 - #define EXTRUDER_RUNOUT_SPEED 1500 // (mm/min) + #define EXTRUDER_RUNOUT_SPEED 180 // (mm/min) #define EXTRUDER_RUNOUT_EXTRUDE 5 // (mm) #endif @@ -736,8 +738,8 @@ //#define SENSORLESS_BACKOFF_MM { 2, 2 } // (mm) Backoff from endstops before sensorless homing -#define HOMING_BUMP_MM { 5, 5, 2 } // (mm) Backoff from endstops after first bump -#define HOMING_BUMP_DIVISOR { 2, 2, 4 } // Re-Bump Speed Divisor (Divides the Homing Feedrate) +#define HOMING_BUMP_MM { 10, 15, 10 } // (mm) Backoff from endstops after first bump +#define HOMING_BUMP_DIVISOR { 2, 2, 2 } // Re-Bump Speed Divisor (Divides the Homing Feedrate) //#define HOMING_BACKOFF_POST_MM { 2, 2, 2 } // (mm) Backoff from endstops after homing @@ -925,7 +927,7 @@ * Set DISABLE_INACTIVE_? 'true' to shut down axis steppers after an idle period. * The Deactive Time can be overridden with M18 and M84. Set to 0 for No Timeout. */ -#define DEFAULT_STEPPER_DEACTIVE_TIME 120 +#define DEFAULT_STEPPER_DEACTIVE_TIME 0 #define DISABLE_INACTIVE_X true #define DISABLE_INACTIVE_Y true #define DISABLE_INACTIVE_Z true // Set 'false' if the nozzle could fall onto your printed part! @@ -1134,7 +1136,7 @@ // @section lcd #if EITHER(IS_ULTIPANEL, EXTENSIBLE_UI) - #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel + #define MANUAL_FEEDRATE { 50*60, 50*60, 10*60, 60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines #if IS_ULTIPANEL #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position" @@ -1301,7 +1303,7 @@ //#define BROWSE_MEDIA_ON_INSERT // Open the file browser when media is inserted - #define EVENT_GCODE_SD_ABORT "G28XY" // G-code to run on SD Abort Print (e.g., "G28XY" or "G27") + //#define EVENT_GCODE_SD_ABORT "G28XY" // G-code to run on SD Abort Print (e.g., "G28XY" or "G27") #if ENABLED(PRINTER_EVENT_LEDS) #define PE_LEDS_COMPLETED_TIME (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination @@ -3562,12 +3564,12 @@ #define MAIN_MENU_ITEM_2_GCODE "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND) //#define MAIN_MENU_ITEM_2_CONFIRM - //#define MAIN_MENU_ITEM_3_DESC "Preheat for " PREHEAT_2_LABEL - //#define MAIN_MENU_ITEM_3_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) + #define MAIN_MENU_ITEM_3_DESC "Preheat for " PREHEAT_2_LABEL + #define MAIN_MENU_ITEM_3_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) //#define MAIN_MENU_ITEM_3_CONFIRM - //#define MAIN_MENU_ITEM_4_DESC "Heat Bed/Home/Level" - //#define MAIN_MENU_ITEM_4_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29" + #define MAIN_MENU_ITEM_4_DESC "Heat Bed/Home/Level" + #define MAIN_MENU_ITEM_4_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29" //#define MAIN_MENU_ITEM_4_CONFIRM //#define MAIN_MENU_ITEM_5_DESC "Home & Info" diff --git a/config/examples/Tevo/Michelangelo/Configuration.h b/config/examples/Tevo/Michelangelo/Configuration.h index 78c2dc9160..8763d1defc 100644 --- a/config/examples/Tevo/Michelangelo/Configuration.h +++ b/config/examples/Tevo/Michelangelo/Configuration.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Tevo/Michelangelo" + /** * Configuration.h * @@ -69,7 +71,7 @@ // @section info // Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes. +#define STRING_CONFIG_H_AUTHOR "(thisiskeithb, Tevo Michelangelo)" // Who made the changes. //#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) /** @@ -87,7 +89,7 @@ #define SHOW_BOOTSCREEN // Show the bitmap in Marlin/_Bootscreen.h on startup. -//#define SHOW_CUSTOM_BOOTSCREEN +#define SHOW_CUSTOM_BOOTSCREEN // Show the bitmap in Marlin/_Statusscreen.h on the status screen. //#define CUSTOM_STATUS_SCREEN_IMAGE @@ -134,11 +136,11 @@ // Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_RAMPS_14_EFB + #define MOTHERBOARD BOARD_MKS_GEN_L #endif // Name displayed in the LCD "Ready" message and Info menu -//#define CUSTOM_MACHINE_NAME "3D Printer" +#define CUSTOM_MACHINE_NAME "Michelangelo" // Printer's unique ID, used by some programs to differentiate between machines. // Choose your own or use a service like https://www.uuidgenerator.net/version4 @@ -444,11 +446,11 @@ //#define TEMP_SENSOR_1_AS_REDUNDANT #define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10 -#define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 +#define TEMP_RESIDENCY_TIME 5 // (seconds) Time to wait for hotend to "settle" in M109 #define TEMP_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer #define TEMP_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target -#define TEMP_BED_RESIDENCY_TIME 10 // (seconds) Time to wait for bed to "settle" in M190 +#define TEMP_BED_RESIDENCY_TIME 5 // (seconds) Time to wait for bed to "settle" in M190 #define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer #define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target @@ -472,7 +474,7 @@ // Above this temperature the heater will be switched off. // This can protect components from overheating, but NOT from shorts and failures. // (Use MINTEMP for thermistor short/failure protection.) -#define HEATER_0_MAXTEMP 275 +#define HEATER_0_MAXTEMP 285 #define HEATER_1_MAXTEMP 275 #define HEATER_2_MAXTEMP 275 #define HEATER_3_MAXTEMP 275 @@ -505,21 +507,22 @@ #define PID_K1 0.95 // Smoothing factor within any PID loop #if ENABLED(PIDTEMP) - //#define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) - //#define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) + #define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) + #define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) // Set/get with gcode: M301 E[extruder number, 0-2] + // Tevo Michelangelo #if ENABLED(PID_PARAMS_PER_HOTEND) // Specify between 1 and HOTENDS values per array. // If fewer than EXTRUDER values are provided, the last element will be repeated. - #define DEFAULT_Kp_LIST { 22.20, 22.20 } - #define DEFAULT_Ki_LIST { 1.08, 1.08 } - #define DEFAULT_Kd_LIST { 114.00, 114.00 } + #define DEFAULT_Kp_LIST { 19.71, 19.71 } + #define DEFAULT_Ki_LIST { 1.39, 1.39 } + #define DEFAULT_Kd_LIST { 69.81, 69.81 } #else - #define DEFAULT_Kp 22.20 - #define DEFAULT_Ki 1.08 - #define DEFAULT_Kd 114.00 + #define DEFAULT_Kp 19.71 + #define DEFAULT_Ki 1.39 + #define DEFAULT_Kd 69.81 #endif #endif // PIDTEMP @@ -634,7 +637,7 @@ * Note: For Bowden Extruders make this large enough to allow load/unload. */ #define PREVENT_LENGTHY_EXTRUDE -#define EXTRUDE_MAXLENGTH 200 +#define EXTRUDE_MAXLENGTH 300 //=========================================================================== //======================== Thermal Runaway Protection ======================= @@ -717,9 +720,9 @@ #endif // Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. +#define X_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Y_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Z_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. #define X_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. #define Y_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. #define Z_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. @@ -806,14 +809,14 @@ * Override with M92 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 500 } +#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 408 } /** * Default Max Feed Rate (mm/s) * Override with M203 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 } +#define DEFAULT_MAX_FEEDRATE { 500, 500, 60, 55 } //#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 #if ENABLED(LIMITED_MAX_FR_EDITING) @@ -826,7 +829,7 @@ * Override with M201 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 } +#define DEFAULT_MAX_ACCELERATION { 10000, 10000, 400, 10000 } //#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 #if ENABLED(LIMITED_MAX_ACCEL_EDITING) @@ -841,9 +844,9 @@ * M204 R Retract Acceleration * M204 T Travel Acceleration */ -#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves +#define DEFAULT_ACCELERATION 2000 // X, Y, Z and E acceleration for printing moves +#define DEFAULT_RETRACT_ACCELERATION 10000 // E acceleration for retracts +#define DEFAULT_TRAVEL_ACCELERATION 5000 // X, Y, Z acceleration for travel (non printing) moves /** * Default Jerk limits (mm/s) @@ -877,7 +880,7 @@ * https://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html */ #if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.013 // (mm) Distance from real junction edge + #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge #define JD_HANDLE_SMALL_SEGMENTS // Use curvature estimation instead of just the junction angle // for small segments (< 1mm) with large junction angles (> 135°). #endif @@ -890,7 +893,7 @@ * * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained */ -//#define S_CURVE_ACCELERATION +#define S_CURVE_ACCELERATION //=========================================================================== //============================= Z Probe Options ============================= @@ -1065,7 +1068,7 @@ #define XY_PROBE_FEEDRATE (133*60) // Feedrate (mm/min) for the first approach when double-probing (MULTIPLE_PROBING == 2) -#define Z_PROBE_FEEDRATE_FAST (4*60) +#define Z_PROBE_FEEDRATE_FAST (30*60) // Feedrate (mm/min) for the "accurate" probe of each point #define Z_PROBE_FEEDRATE_SLOW (Z_PROBE_FEEDRATE_FAST / 2) @@ -1192,12 +1195,12 @@ // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR false #define INVERT_Y_DIR true -#define INVERT_Z_DIR false +#define INVERT_Z_DIR true // @section extruder // For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR false +#define INVERT_E0_DIR true #define INVERT_E1_DIR false #define INVERT_E2_DIR false #define INVERT_E3_DIR false @@ -1232,16 +1235,16 @@ // @section machine // The size of the printable area -#define X_BED_SIZE 200 -#define Y_BED_SIZE 200 +#define X_BED_SIZE 150 +#define Y_BED_SIZE 150 // Travel limits (mm) after homing, corresponding to endstop positions. -#define X_MIN_POS 0 +#define X_MIN_POS -10 #define Y_MIN_POS 0 #define Z_MIN_POS 0 #define X_MAX_POS X_BED_SIZE #define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 200 +#define Z_MAX_POS 160 /** * Software Endstops @@ -1389,14 +1392,14 @@ //#define AUTO_BED_LEVELING_LINEAR //#define AUTO_BED_LEVELING_BILINEAR //#define AUTO_BED_LEVELING_UBL -//#define MESH_BED_LEVELING +#define MESH_BED_LEVELING /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable * leveling immediately after G28. */ -//#define RESTORE_LEVELING_AFTER_G28 +#define RESTORE_LEVELING_AFTER_G28 //#define ENABLE_LEVELING_AFTER_G28 /** @@ -1438,7 +1441,7 @@ /** * Enable the G26 Mesh Validation Pattern tool. */ - //#define G26_MESH_VALIDATION + #define G26_MESH_VALIDATION #if ENABLED(G26_MESH_VALIDATION) #define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle. #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for G26. @@ -1518,7 +1521,7 @@ * Add a bed leveling sub-menu for ABL or MBL. * Include a guided procedure if manual probing is enabled. */ -//#define LCD_BED_LEVELING +#define LCD_BED_LEVELING #if ENABLED(LCD_BED_LEVELING) #define MESH_EDIT_Z_STEP 0.025 // (mm) Step size while manually probing Z axis. @@ -1527,7 +1530,7 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS +#define LEVEL_BED_CORNERS #if ENABLED(LEVEL_BED_CORNERS) #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets @@ -1595,7 +1598,7 @@ #endif // Homing speeds (mm/min) -#define HOMING_FEEDRATE_MM_M { (50*60), (50*60), (4*60) } +#define HOMING_FEEDRATE_MM_M { (120*60), (120*60), (30*60) } // Validate that endstops are triggered on homing moves #define VALIDATE_HOMING_ENDSTOPS @@ -1672,12 +1675,12 @@ * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) */ -//#define EEPROM_SETTINGS // Persistent storage with M500 and M501 +#define EEPROM_SETTINGS // Persistent storage with M500 and M501 //#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. #define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load #if ENABLED(EEPROM_SETTINGS) - //#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. + #define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. #endif // @@ -1706,12 +1709,12 @@ // Preheat Constants - Up to 5 are supported without changes // #define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 180 +#define PREHEAT_1_TEMP_HOTEND 200 #define PREHEAT_1_TEMP_BED 70 #define PREHEAT_1_TEMP_CHAMBER 35 -#define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 +#define PREHEAT_1_FAN_SPEED 255 // Value from 0 to 255 -#define PREHEAT_2_LABEL "ABS" +#define PREHEAT_2_LABEL "PETG" #define PREHEAT_2_TEMP_HOTEND 240 #define PREHEAT_2_TEMP_BED 110 #define PREHEAT_2_TEMP_CHAMBER 35 @@ -1728,7 +1731,7 @@ * P1 Raise the nozzle always to Z-park height. * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. */ -//#define NOZZLE_PARK_FEATURE +#define NOZZLE_PARK_FEATURE #if ENABLED(NOZZLE_PARK_FEATURE) // Specify a park position as { X, Y, Z_raise } @@ -1777,7 +1780,7 @@ * Caveats: The ending Z should be the same as starting Z. * Attention: EXPERIMENTAL. G-code arguments may change. */ -//#define NOZZLE_CLEAN_FEATURE +#define NOZZLE_CLEAN_FEATURE #if ENABLED(NOZZLE_CLEAN_FEATURE) // Default number of pattern repetitions @@ -1845,7 +1848,7 @@ * * View the current statistics with M78. */ -//#define PRINTCOUNTER +#define PRINTCOUNTER #if ENABLED(PRINTCOUNTER) #define PRINTCOUNTER_SAVE_INTERVAL 60 // (minutes) EEPROM save interval during print #endif @@ -1921,7 +1924,7 @@ * * :['JAPANESE', 'WESTERN', 'CYRILLIC'] */ -#define DISPLAY_CHARSET_HD44780 JAPANESE +#define DISPLAY_CHARSET_HD44780 WESTERN /** * Info Screen Style (0:Classic, 1:Průša) @@ -1936,7 +1939,7 @@ * SD Card support is disabled by default. If your controller has an SD slot, * you must uncomment the following option or it won't work. */ -//#define SDSUPPORT +#define SDSUPPORT /** * SD CARD: ENABLE CRC @@ -1960,13 +1963,13 @@ // This option overrides the default number of encoder pulses needed to // produce one step. Should be increased for high-resolution encoders. // -//#define ENCODER_PULSES_PER_STEP 4 +#define ENCODER_PULSES_PER_STEP 4 // // Use this option to override the number of step signals required to // move between next/prev menu items. // -//#define ENCODER_STEPS_PER_MENU_ITEM 1 +#define ENCODER_STEPS_PER_MENU_ITEM 1 /** * Encoder Direction Options @@ -2006,7 +2009,7 @@ // // Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. // -//#define INDIVIDUAL_AXIS_HOMING_MENU +#define INDIVIDUAL_AXIS_HOMING_MENU // // SPEAKER/BUZZER @@ -2014,7 +2017,7 @@ // If you have a speaker that can produce tones, enable it here. // By default Marlin assumes you have a buzzer with a fixed frequency. // -//#define SPEAKER +#define SPEAKER // // The duration and frequency for the UI feedback sound. @@ -2023,8 +2026,8 @@ // Note: Test audio output with the G-Code: // M300 S P // -//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 -//#define LCD_FEEDBACK_FREQUENCY_HZ 5000 +#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 +#define LCD_FEEDBACK_FREQUENCY_HZ 5000 //============================================================================= //======================== LCD / Controller Selection ========================= @@ -2261,7 +2264,7 @@ // MKS MINI12864 with graphic controller and SD support // https://reprap.org/wiki/MKS_MINI_12864 // -//#define MKS_MINI_12864 +#define MKS_MINI_12864 // // MKS LCD12864A/B with graphic controller and SD support. Follows MKS_MINI_12864 pinout. diff --git a/config/examples/Tevo/Michelangelo/Configuration_adv.h b/config/examples/Tevo/Michelangelo/Configuration_adv.h index 5335fa012a..5a21fe19af 100644 --- a/config/examples/Tevo/Michelangelo/Configuration_adv.h +++ b/config/examples/Tevo/Michelangelo/Configuration_adv.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Tevo/Michelangelo" + /** * Configuration_adv.h * @@ -479,7 +481,7 @@ // When first starting the main fan, run it at full speed for the // given number of milliseconds. This gets the fan spinning reliably // before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) -//#define FAN_KICKSTART_TIME 100 +#define FAN_KICKSTART_TIME 100 // Some coolers may require a non-zero "off" state. //#define FAN_OFF_PWM 1 @@ -540,7 +542,7 @@ * Multiple extruders can be assigned to the same pin in which case * the fan will turn on when any selected extruder is above the threshold. */ -#define E0_AUTO_FAN_PIN -1 +#define E0_AUTO_FAN_PIN 7 #define E1_AUTO_FAN_PIN -1 #define E2_AUTO_FAN_PIN -1 #define E3_AUTO_FAN_PIN -1 @@ -741,7 +743,7 @@ //#define HOMING_BACKOFF_POST_MM { 2, 2, 2 } // (mm) Backoff from endstops after homing -//#define QUICK_HOME // If G28 contains XY do a diagonal move first +#define QUICK_HOME // If G28 contains XY do a diagonal move first //#define HOME_Y_BEFORE_X // If G28 contains XY home Y before X //#define HOME_Z_FIRST // Home Z first. Requires a Z-MIN endstop (not a probe). //#define CODEPENDENT_XY_HOMING // If X/Y can't home without homing Y/X first @@ -867,7 +869,7 @@ // On a 300mm bed a 5% grade would give a misalignment of ~1.5cm #define G34_MAX_GRADE 5 // (%) Maximum incline that G34 will handle - #define Z_STEPPER_ALIGN_ITERATIONS 5 // Number of iterations to apply during alignment + #define Z_STEPPER_ALIGN_ITERATIONS 3 // Number of iterations to apply during alignment #define Z_STEPPER_ALIGN_ACC 0.02 // Stop iterating early if the accuracy is better than this #define RESTORE_LEVELING_AFTER_G34 // Restore leveling after G34 is done? // After G34, re-home Z (G28 Z) or just calculate it from the last probe heights? @@ -1175,7 +1177,7 @@ #endif // Include a page of printer information in the LCD Main Menu - //#define LCD_INFO_MENU + #define LCD_INFO_MENU #if ENABLED(LCD_INFO_MENU) //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages #endif @@ -1229,13 +1231,13 @@ #endif // Scroll a longer status message into view - //#define STATUS_MESSAGE_SCROLLING + #define STATUS_MESSAGE_SCROLLING // On the Info Screen, display XY with one decimal place when possible //#define LCD_DECIMAL_SMALL_XY // Add an 'M73' G-code to set the current percentage - //#define LCD_SET_PROGRESS_MANUALLY + #define LCD_SET_PROGRESS_MANUALLY // Show the E position (filament used) during printing //#define LCD_SHOW_E_TOTAL @@ -1361,7 +1363,7 @@ * - SDSORT_CACHE_NAMES will retain the sorted file listing in RAM. (Expensive!) * - SDSORT_DYNAMIC_RAM only uses RAM when the SD menu is visible. (Use with caution!) */ - //#define SDCARD_SORT_ALPHA + #define SDCARD_SORT_ALPHA // SD Card Sorting options #if ENABLED(SDCARD_SORT_ALPHA) @@ -1381,10 +1383,10 @@ //#define UTF_FILENAME_SUPPORT // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT + #define LONG_FILENAME_HOST_SUPPORT // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES + #define SCROLL_LONG_FILENAMES // Leave the heaters on after Stop Print (not recommended!) //#define SD_ABORT_NO_COOLDOWN @@ -1523,7 +1525,7 @@ // A bigger font is available for edit items. Costs 3120 bytes of PROGMEM. // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. - //#define USE_BIG_EDIT_FONT + #define USE_BIG_EDIT_FONT // A smaller font may be used on the Info Screen. Costs 2434 bytes of PROGMEM. // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. @@ -1572,7 +1574,7 @@ //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames - //#define STATUS_HEAT_PERCENT // Show heating in a progress bar + #define STATUS_HEAT_PERCENT // Show heating in a progress bar //#define BOOT_MARLIN_LOGO_ANIMATED // Animated Marlin logo. Costs ~‭3260 (or ~940) bytes of PROGMEM. // Frivolous Game Options @@ -1790,7 +1792,7 @@ * * Warning: Does not respect endstops! */ -//#define BABYSTEPPING +#define BABYSTEPPING #if ENABLED(BABYSTEPPING) //#define INTEGRATED_BABYSTEPPING // EXPERIMENTAL integration of babystepping into the Stepper ISR //#define BABYSTEP_WITHOUT_HOMING @@ -1801,7 +1803,7 @@ #define BABYSTEP_MULTIPLICATOR_Z 1 // (steps or mm) Steps or millimeter distance for each Z babystep #define BABYSTEP_MULTIPLICATOR_XY 1 // (steps or mm) Steps or millimeter distance for each XY babystep - //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. + #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. // Note: Extra time may be added to mitigate controller latency. @@ -2311,7 +2313,7 @@ * * Enable PARK_HEAD_ON_PAUSE to add the G-code M125 Pause and Park. */ -//#define ADVANCED_PAUSE_FEATURE +#define ADVANCED_PAUSE_FEATURE #if ENABLED(ADVANCED_PAUSE_FEATURE) #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. diff --git a/config/examples/Tevo/Nereus/Configuration.h b/config/examples/Tevo/Nereus/Configuration.h index 78c2dc9160..7c2590ec88 100644 --- a/config/examples/Tevo/Nereus/Configuration.h +++ b/config/examples/Tevo/Nereus/Configuration.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Tevo/Nereus" + /** * Configuration.h * @@ -69,7 +71,7 @@ // @section info // Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes. +#define STRING_CONFIG_H_AUTHOR "(thisiskeithb & Rob Cad, Tevo Nereus)" // Who made the changes. //#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) /** @@ -87,7 +89,7 @@ #define SHOW_BOOTSCREEN // Show the bitmap in Marlin/_Bootscreen.h on startup. -//#define SHOW_CUSTOM_BOOTSCREEN +#define SHOW_CUSTOM_BOOTSCREEN // Show the bitmap in Marlin/_Statusscreen.h on the status screen. //#define CUSTOM_STATUS_SCREEN_IMAGE @@ -102,14 +104,14 @@ * * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] */ -#define SERIAL_PORT 0 +#define SERIAL_PORT 3 /** * Select a secondary serial port on the board to use for communication with the host. * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] */ -//#define SERIAL_PORT_2 -1 +#define SERIAL_PORT_2 1 /** * Select a third serial port on the board to use for communication with the host. @@ -127,18 +129,18 @@ * * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ -#define BAUDRATE 250000 +#define BAUDRATE 115200 // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH // Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_RAMPS_14_EFB + #define MOTHERBOARD BOARD_MKS_ROBIN_NANO #endif // Name displayed in the LCD "Ready" message and Info menu -//#define CUSTOM_MACHINE_NAME "3D Printer" +#define CUSTOM_MACHINE_NAME "Tevo Nereus" // Printer's unique ID, used by some programs to differentiate between machines. // Choose your own or use a service like https://www.uuidgenerator.net/version4 @@ -424,7 +426,7 @@ #define TEMP_SENSOR_5 0 #define TEMP_SENSOR_6 0 #define TEMP_SENSOR_7 0 -#define TEMP_SENSOR_BED 0 +#define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 #define TEMP_SENSOR_COOLER 0 @@ -480,7 +482,7 @@ #define HEATER_5_MAXTEMP 275 #define HEATER_6_MAXTEMP 275 #define HEATER_7_MAXTEMP 275 -#define BED_MAXTEMP 150 +#define BED_MAXTEMP 110 #define CHAMBER_MAXTEMP 60 /** @@ -510,16 +512,17 @@ //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) // Set/get with gcode: M301 E[extruder number, 0-2] + // Tevo Nereus #if ENABLED(PID_PARAMS_PER_HOTEND) // Specify between 1 and HOTENDS values per array. // If fewer than EXTRUDER values are provided, the last element will be repeated. - #define DEFAULT_Kp_LIST { 22.20, 22.20 } - #define DEFAULT_Ki_LIST { 1.08, 1.08 } - #define DEFAULT_Kd_LIST { 114.00, 114.00 } + #define DEFAULT_Kp_LIST { 12.13, 12.13 } + #define DEFAULT_Ki_LIST { 0.82, 0.82 } + #define DEFAULT_Kd_LIST { 44.71, 44.71 } #else - #define DEFAULT_Kp 22.20 - #define DEFAULT_Ki 1.08 - #define DEFAULT_Kd 114.00 + #define DEFAULT_Kp 12.13 + #define DEFAULT_Ki 0.82 + #define DEFAULT_Kd 44.71 #endif #endif // PIDTEMP @@ -540,7 +543,7 @@ * heater. If your configuration is significantly different than this and you don't understand * the issues involved, don't use bed PID until someone else verifies that your hardware works. */ -//#define PIDTEMPBED +#define PIDTEMPBED //#define BED_LIMIT_SWITCHING @@ -717,9 +720,9 @@ #endif // Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. +#define X_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Y_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Z_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. #define X_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. #define Y_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. #define Z_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. @@ -806,14 +809,14 @@ * Override with M92 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 500 } +#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 370 } /** * Default Max Feed Rate (mm/s) * Override with M203 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 } +#define DEFAULT_MAX_FEEDRATE { 300, 300, 10, 70 } //#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 #if ENABLED(LIMITED_MAX_FR_EDITING) @@ -826,7 +829,7 @@ * Override with M201 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 } +#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 200, 10000 } //#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 #if ENABLED(LIMITED_MAX_ACCEL_EDITING) @@ -841,9 +844,9 @@ * M204 R Retract Acceleration * M204 T Travel Acceleration */ -#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves +#define DEFAULT_ACCELERATION 1000 // X, Y, Z and E acceleration for printing moves +#define DEFAULT_RETRACT_ACCELERATION 5000 // E acceleration for retracts +#define DEFAULT_TRAVEL_ACCELERATION 1500 // X, Y, Z acceleration for travel (non printing) moves /** * Default Jerk limits (mm/s) @@ -890,7 +893,7 @@ * * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained */ -//#define S_CURVE_ACCELERATION +#define S_CURVE_ACCELERATION //=========================================================================== //============================= Z Probe Options ============================= @@ -1191,8 +1194,8 @@ // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR false -#define INVERT_Y_DIR true -#define INVERT_Z_DIR false +#define INVERT_Y_DIR false +#define INVERT_Z_DIR true // @section extruder @@ -1218,7 +1221,7 @@ */ //#define Z_IDLE_HEIGHT Z_HOME_POS -//#define Z_HOMING_HEIGHT 4 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ... +#define Z_HOMING_HEIGHT 4 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ... // Be sure to have this much clearance over your Z_MAX_POS to prevent grinding. //#define Z_AFTER_HOMING 10 // (mm) Height to move to after homing Z @@ -1232,8 +1235,8 @@ // @section machine // The size of the printable area -#define X_BED_SIZE 200 -#define Y_BED_SIZE 200 +#define X_BED_SIZE 320 +#define Y_BED_SIZE 320 // Travel limits (mm) after homing, corresponding to endstop positions. #define X_MIN_POS 0 @@ -1241,7 +1244,7 @@ #define Z_MIN_POS 0 #define X_MAX_POS X_BED_SIZE #define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 200 +#define Z_MAX_POS 400 /** * Software Endstops @@ -1285,7 +1288,7 @@ * RAMPS-based boards use SERVO3_PIN for the first runout sensor. * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. */ -//#define FILAMENT_RUNOUT_SENSOR +#define FILAMENT_RUNOUT_SENSOR #if ENABLED(FILAMENT_RUNOUT_SENSOR) #define FIL_RUNOUT_ENABLED_DEFAULT true // Enable the sensor on startup. Override with M412 followed by M500. #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. @@ -1396,7 +1399,7 @@ * these options to restore the prior leveling state or to always enable * leveling immediately after G28. */ -//#define RESTORE_LEVELING_AFTER_G28 +#define RESTORE_LEVELING_AFTER_G28 //#define ENABLE_LEVELING_AFTER_G28 /** @@ -1527,13 +1530,13 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS +#define LEVEL_BED_CORNERS #if ENABLED(LEVEL_BED_CORNERS) #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner + #define LEVEL_CENTER_TOO // Move to the center after the last corner //#define LEVEL_CORNERS_USE_PROBE #if ENABLED(LEVEL_CORNERS_USE_PROBE) #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 @@ -1672,12 +1675,12 @@ * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) */ -//#define EEPROM_SETTINGS // Persistent storage with M500 and M501 +#define EEPROM_SETTINGS // Persistent storage with M500 and M501 //#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. #define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load #if ENABLED(EEPROM_SETTINGS) - //#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. + #define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. #endif // @@ -1706,7 +1709,7 @@ // Preheat Constants - Up to 5 are supported without changes // #define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 180 +#define PREHEAT_1_TEMP_HOTEND 200 #define PREHEAT_1_TEMP_BED 70 #define PREHEAT_1_TEMP_CHAMBER 35 #define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 @@ -1728,7 +1731,7 @@ * P1 Raise the nozzle always to Z-park height. * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. */ -//#define NOZZLE_PARK_FEATURE +#define NOZZLE_PARK_FEATURE #if ENABLED(NOZZLE_PARK_FEATURE) // Specify a park position as { X, Y, Z_raise } @@ -1845,7 +1848,7 @@ * * View the current statistics with M78. */ -//#define PRINTCOUNTER +#define PRINTCOUNTER #if ENABLED(PRINTCOUNTER) #define PRINTCOUNTER_SAVE_INTERVAL 60 // (minutes) EEPROM save interval during print #endif @@ -1936,14 +1939,14 @@ * SD Card support is disabled by default. If your controller has an SD slot, * you must uncomment the following option or it won't work. */ -//#define SDSUPPORT +#define SDSUPPORT /** * SD CARD: ENABLE CRC * * Use CRC checks and retries on the SD communication. */ -//#define SD_CHECK_AND_RETRY +#define SD_CHECK_AND_RETRY /** * LCD Menu Items @@ -2472,7 +2475,7 @@ // 480x320, 3.5", FSMC Display From MKS // Normally used in MKS Robin Nano V1.2 // -//#define MKS_ROBIN_TFT35 +#define MKS_ROBIN_TFT35 // // 480x272, 4.3", FSMC Display From MKS @@ -2543,7 +2546,7 @@ * For LVGL_UI also copy the 'assets' folder from the build directory to the * root of your SD card, together with the compiled firmware. */ -//#define TFT_CLASSIC_UI +#define TFT_CLASSIC_UI //#define TFT_COLOR_UI //#define TFT_LVGL_UI @@ -2573,17 +2576,17 @@ // // Touch Screen Settings // -//#define TOUCH_SCREEN +#define TOUCH_SCREEN #if ENABLED(TOUCH_SCREEN) #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus #define TOUCH_SCREEN_CALIBRATION - //#define TOUCH_CALIBRATION_X 12316 - //#define TOUCH_CALIBRATION_Y -8981 - //#define TOUCH_OFFSET_X -43 - //#define TOUCH_OFFSET_Y 257 + #define TOUCH_CALIBRATION_X 12149 + #define TOUCH_CALIBRATION_Y -8746 + #define TOUCH_OFFSET_X -35 + #define TOUCH_OFFSET_Y 256 //#define TOUCH_ORIENTATION TOUCH_LANDSCAPE #if BOTH(TOUCH_SCREEN_CALIBRATION, EEPROM_SETTINGS) diff --git a/config/examples/Tevo/Nereus/Configuration_adv.h b/config/examples/Tevo/Nereus/Configuration_adv.h index 5335fa012a..7245e34659 100644 --- a/config/examples/Tevo/Nereus/Configuration_adv.h +++ b/config/examples/Tevo/Nereus/Configuration_adv.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Tevo/Nereus" + /** * Configuration_adv.h * @@ -479,7 +481,7 @@ // When first starting the main fan, run it at full speed for the // given number of milliseconds. This gets the fan spinning reliably // before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) -//#define FAN_KICKSTART_TIME 100 +#define FAN_KICKSTART_TIME 100 // Some coolers may require a non-zero "off" state. //#define FAN_OFF_PWM 1 @@ -540,7 +542,7 @@ * Multiple extruders can be assigned to the same pin in which case * the fan will turn on when any selected extruder is above the threshold. */ -#define E0_AUTO_FAN_PIN -1 +#define E0_AUTO_FAN_PIN FAN1_PIN #define E1_AUTO_FAN_PIN -1 #define E2_AUTO_FAN_PIN -1 #define E3_AUTO_FAN_PIN -1 @@ -741,7 +743,7 @@ //#define HOMING_BACKOFF_POST_MM { 2, 2, 2 } // (mm) Backoff from endstops after homing -//#define QUICK_HOME // If G28 contains XY do a diagonal move first +#define QUICK_HOME // If G28 contains XY do a diagonal move first //#define HOME_Y_BEFORE_X // If G28 contains XY home Y before X //#define HOME_Z_FIRST // Home Z first. Requires a Z-MIN endstop (not a probe). //#define CODEPENDENT_XY_HOMING // If X/Y can't home without homing Y/X first @@ -826,7 +828,7 @@ // Define probe X and Y positions for Z1, Z2 [, Z3 [, Z4]] // If not defined, probe limits will be used. // Override with 'M422 S X Y' - //#define Z_STEPPER_ALIGN_XY { { 10, 190 }, { 100, 10 }, { 190, 190 } } + //#define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } /** * Orientation for the automatically-calculated probe positions. @@ -867,7 +869,7 @@ // On a 300mm bed a 5% grade would give a misalignment of ~1.5cm #define G34_MAX_GRADE 5 // (%) Maximum incline that G34 will handle - #define Z_STEPPER_ALIGN_ITERATIONS 5 // Number of iterations to apply during alignment + #define Z_STEPPER_ALIGN_ITERATIONS 3 // Number of iterations to apply during alignment #define Z_STEPPER_ALIGN_ACC 0.02 // Stop iterating early if the accuracy is better than this #define RESTORE_LEVELING_AFTER_G34 // Restore leveling after G34 is done? // After G34, re-home Z (G28 Z) or just calculate it from the last probe heights? @@ -1790,7 +1792,7 @@ * * Warning: Does not respect endstops! */ -//#define BABYSTEPPING +#define BABYSTEPPING #if ENABLED(BABYSTEPPING) //#define INTEGRATED_BABYSTEPPING // EXPERIMENTAL integration of babystepping into the Stepper ISR //#define BABYSTEP_WITHOUT_HOMING @@ -1801,7 +1803,7 @@ #define BABYSTEP_MULTIPLICATOR_Z 1 // (steps or mm) Steps or millimeter distance for each Z babystep #define BABYSTEP_MULTIPLICATOR_XY 1 // (steps or mm) Steps or millimeter distance for each XY babystep - //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. + #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. // Note: Extra time may be added to mitigate controller latency. @@ -2311,7 +2313,7 @@ * * Enable PARK_HEAD_ON_PAUSE to add the G-code M125 Pause and Park. */ -//#define ADVANCED_PAUSE_FEATURE +#define ADVANCED_PAUSE_FEATURE #if ENABLED(ADVANCED_PAUSE_FEATURE) #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. @@ -2719,7 +2721,7 @@ * Define your own with: * { , , hysteresis_start[1..8] } */ - #define CHOPPER_TIMING CHOPPER_DEFAULT_12V // All axes (override below) + #define CHOPPER_TIMING CHOPPER_DEFAULT_24V // All axes (override below) //#define CHOPPER_TIMING_X CHOPPER_TIMING // For X Axes (override below) //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X //#define CHOPPER_TIMING_Y CHOPPER_TIMING // For Y Axes (override below) diff --git a/config/examples/Tevo/Tarantula Pro/Configuration.h b/config/examples/Tevo/Tarantula Pro/Configuration.h index 78c2dc9160..b5949b36ec 100644 --- a/config/examples/Tevo/Tarantula Pro/Configuration.h +++ b/config/examples/Tevo/Tarantula Pro/Configuration.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Tevo/Tarantula Pro" + /** * Configuration.h * @@ -69,7 +71,7 @@ // @section info // Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes. +#define STRING_CONFIG_H_AUTHOR "(thisiskeithb, Tevo Tarantula Pro)" // Who made the changes. //#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) /** @@ -87,7 +89,7 @@ #define SHOW_BOOTSCREEN // Show the bitmap in Marlin/_Bootscreen.h on startup. -//#define SHOW_CUSTOM_BOOTSCREEN +#define SHOW_CUSTOM_BOOTSCREEN // Show the bitmap in Marlin/_Statusscreen.h on the status screen. //#define CUSTOM_STATUS_SCREEN_IMAGE @@ -134,11 +136,11 @@ // Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_RAMPS_14_EFB + #define MOTHERBOARD BOARD_MKS_GEN_L #endif // Name displayed in the LCD "Ready" message and Info menu -//#define CUSTOM_MACHINE_NAME "3D Printer" +#define CUSTOM_MACHINE_NAME "Tarantula Pro" // Printer's unique ID, used by some programs to differentiate between machines. // Choose your own or use a service like https://www.uuidgenerator.net/version4 @@ -424,7 +426,7 @@ #define TEMP_SENSOR_5 0 #define TEMP_SENSOR_6 0 #define TEMP_SENSOR_7 0 -#define TEMP_SENSOR_BED 0 +#define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 #define TEMP_SENSOR_COOLER 0 @@ -480,7 +482,7 @@ #define HEATER_5_MAXTEMP 275 #define HEATER_6_MAXTEMP 275 #define HEATER_7_MAXTEMP 275 -#define BED_MAXTEMP 150 +#define BED_MAXTEMP 140 #define CHAMBER_MAXTEMP 60 /** @@ -510,16 +512,17 @@ //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) // Set/get with gcode: M301 E[extruder number, 0-2] + // Tevo Tarantula Pro #if ENABLED(PID_PARAMS_PER_HOTEND) // Specify between 1 and HOTENDS values per array. // If fewer than EXTRUDER values are provided, the last element will be repeated. - #define DEFAULT_Kp_LIST { 22.20, 22.20 } - #define DEFAULT_Ki_LIST { 1.08, 1.08 } - #define DEFAULT_Kd_LIST { 114.00, 114.00 } + #define DEFAULT_Kp_LIST { 26.27, 26.27 } + #define DEFAULT_Ki_LIST { 2.49, 2.49 } + #define DEFAULT_Kd_LIST { 69.41, 69.41 } #else - #define DEFAULT_Kp 22.20 - #define DEFAULT_Ki 1.08 - #define DEFAULT_Kd 114.00 + #define DEFAULT_Kp 26.27 + #define DEFAULT_Ki 2.49 + #define DEFAULT_Kd 69.41 #endif #endif // PIDTEMP @@ -717,9 +720,9 @@ #endif // Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. +#define X_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Y_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Z_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. #define X_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. #define Y_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. #define Z_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. @@ -806,14 +809,14 @@ * Override with M92 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 500 } +#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 408 } /** * Default Max Feed Rate (mm/s) * Override with M203 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 } +#define DEFAULT_MAX_FEEDRATE { 400, 400, 50, 45 } //#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 #if ENABLED(LIMITED_MAX_FR_EDITING) @@ -841,9 +844,9 @@ * M204 R Retract Acceleration * M204 T Travel Acceleration */ -#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves +#define DEFAULT_ACCELERATION 1000 // X, Y, Z and E acceleration for printing moves +#define DEFAULT_RETRACT_ACCELERATION 10000 // E acceleration for retracts +#define DEFAULT_TRAVEL_ACCELERATION 1500 // X, Y, Z acceleration for travel (non printing) moves /** * Default Jerk limits (mm/s) @@ -877,7 +880,7 @@ * https://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html */ #if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.013 // (mm) Distance from real junction edge + #define JUNCTION_DEVIATION_MM 0.04 // (mm) Distance from real junction edge #define JD_HANDLE_SMALL_SEGMENTS // Use curvature estimation instead of just the junction angle // for small segments (< 1mm) with large junction angles (> 135°). #endif @@ -890,7 +893,7 @@ * * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained */ -//#define S_CURVE_ACCELERATION +#define S_CURVE_ACCELERATION //=========================================================================== //============================= Z Probe Options ============================= @@ -1055,14 +1058,14 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +#define NOZZLE_TO_PROBE_OFFSET { 0, 18, -1.5 } // Most probes should stay away from the edges of the bed, but // with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed (mm/min) between probes -#define XY_PROBE_FEEDRATE (133*60) +#define XY_PROBE_FEEDRATE (250*60) // Feedrate (mm/min) for the first approach when double-probing (MULTIPLE_PROBING == 2) #define Z_PROBE_FEEDRATE_FAST (4*60) @@ -1192,12 +1195,12 @@ // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR false #define INVERT_Y_DIR true -#define INVERT_Z_DIR false +#define INVERT_Z_DIR true // @section extruder // For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR false +#define INVERT_E0_DIR true #define INVERT_E1_DIR false #define INVERT_E2_DIR false #define INVERT_E3_DIR false @@ -1232,16 +1235,16 @@ // @section machine // The size of the printable area -#define X_BED_SIZE 200 -#define Y_BED_SIZE 200 +#define X_BED_SIZE 240 +#define Y_BED_SIZE 240 // Travel limits (mm) after homing, corresponding to endstop positions. -#define X_MIN_POS 0 +#define X_MIN_POS -12 #define Y_MIN_POS 0 #define Z_MIN_POS 0 #define X_MAX_POS X_BED_SIZE #define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 200 +#define Z_MAX_POS 260 /** * Software Endstops @@ -1672,12 +1675,12 @@ * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) */ -//#define EEPROM_SETTINGS // Persistent storage with M500 and M501 +#define EEPROM_SETTINGS // Persistent storage with M500 and M501 //#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. #define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load #if ENABLED(EEPROM_SETTINGS) - //#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. + #define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. #endif // @@ -1706,10 +1709,10 @@ // Preheat Constants - Up to 5 are supported without changes // #define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 180 +#define PREHEAT_1_TEMP_HOTEND 200 #define PREHEAT_1_TEMP_BED 70 #define PREHEAT_1_TEMP_CHAMBER 35 -#define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 +#define PREHEAT_1_FAN_SPEED 255 // Value from 0 to 255 #define PREHEAT_2_LABEL "ABS" #define PREHEAT_2_TEMP_HOTEND 240 @@ -1845,7 +1848,7 @@ * * View the current statistics with M78. */ -//#define PRINTCOUNTER +#define PRINTCOUNTER #if ENABLED(PRINTCOUNTER) #define PRINTCOUNTER_SAVE_INTERVAL 60 // (minutes) EEPROM save interval during print #endif @@ -1936,7 +1939,7 @@ * SD Card support is disabled by default. If your controller has an SD slot, * you must uncomment the following option or it won't work. */ -//#define SDSUPPORT +#define SDSUPPORT /** * SD CARD: ENABLE CRC @@ -1960,13 +1963,13 @@ // This option overrides the default number of encoder pulses needed to // produce one step. Should be increased for high-resolution encoders. // -//#define ENCODER_PULSES_PER_STEP 4 +#define ENCODER_PULSES_PER_STEP 4 // // Use this option to override the number of step signals required to // move between next/prev menu items. // -//#define ENCODER_STEPS_PER_MENU_ITEM 1 +#define ENCODER_STEPS_PER_MENU_ITEM 1 /** * Encoder Direction Options @@ -2006,7 +2009,7 @@ // // Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. // -//#define INDIVIDUAL_AXIS_HOMING_MENU +#define INDIVIDUAL_AXIS_HOMING_MENU // // SPEAKER/BUZZER @@ -2261,7 +2264,7 @@ // MKS MINI12864 with graphic controller and SD support // https://reprap.org/wiki/MKS_MINI_12864 // -//#define MKS_MINI_12864 +#define MKS_MINI_12864 // // MKS LCD12864A/B with graphic controller and SD support. Follows MKS_MINI_12864 pinout. diff --git a/config/examples/Tevo/Tarantula Pro/Configuration_adv.h b/config/examples/Tevo/Tarantula Pro/Configuration_adv.h index 5335fa012a..dd23f58a9e 100644 --- a/config/examples/Tevo/Tarantula Pro/Configuration_adv.h +++ b/config/examples/Tevo/Tarantula Pro/Configuration_adv.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Tevo/Tarantula Pro" + /** * Configuration_adv.h * @@ -479,7 +481,7 @@ // When first starting the main fan, run it at full speed for the // given number of milliseconds. This gets the fan spinning reliably // before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) -//#define FAN_KICKSTART_TIME 100 +#define FAN_KICKSTART_TIME 100 // Some coolers may require a non-zero "off" state. //#define FAN_OFF_PWM 1 @@ -540,7 +542,7 @@ * Multiple extruders can be assigned to the same pin in which case * the fan will turn on when any selected extruder is above the threshold. */ -#define E0_AUTO_FAN_PIN -1 +#define E0_AUTO_FAN_PIN 7 #define E1_AUTO_FAN_PIN -1 #define E2_AUTO_FAN_PIN -1 #define E3_AUTO_FAN_PIN -1 @@ -741,7 +743,7 @@ //#define HOMING_BACKOFF_POST_MM { 2, 2, 2 } // (mm) Backoff from endstops after homing -//#define QUICK_HOME // If G28 contains XY do a diagonal move first +#define QUICK_HOME // If G28 contains XY do a diagonal move first //#define HOME_Y_BEFORE_X // If G28 contains XY home Y before X //#define HOME_Z_FIRST // Home Z first. Requires a Z-MIN endstop (not a probe). //#define CODEPENDENT_XY_HOMING // If X/Y can't home without homing Y/X first @@ -867,7 +869,7 @@ // On a 300mm bed a 5% grade would give a misalignment of ~1.5cm #define G34_MAX_GRADE 5 // (%) Maximum incline that G34 will handle - #define Z_STEPPER_ALIGN_ITERATIONS 5 // Number of iterations to apply during alignment + #define Z_STEPPER_ALIGN_ITERATIONS 3 // Number of iterations to apply during alignment #define Z_STEPPER_ALIGN_ACC 0.02 // Stop iterating early if the accuracy is better than this #define RESTORE_LEVELING_AFTER_G34 // Restore leveling after G34 is done? // After G34, re-home Z (G28 Z) or just calculate it from the last probe heights? @@ -1145,8 +1147,8 @@ // Change values more rapidly when the encoder is rotated faster #define ENCODER_RATE_MULTIPLIER #if ENABLED(ENCODER_RATE_MULTIPLIER) - #define ENCODER_10X_STEPS_PER_SEC 30 // (steps/s) Encoder rate for 10x speed - #define ENCODER_100X_STEPS_PER_SEC 80 // (steps/s) Encoder rate for 100x speed + #define ENCODER_10X_STEPS_PER_SEC 75 // (steps/s) Encoder rate for 10x speed + #define ENCODER_100X_STEPS_PER_SEC 160 // (steps/s) Encoder rate for 100x speed #endif // Play a beep when the feedrate is changed from the Status Screen @@ -1175,7 +1177,7 @@ #endif // Include a page of printer information in the LCD Main Menu - //#define LCD_INFO_MENU + #define LCD_INFO_MENU #if ENABLED(LCD_INFO_MENU) //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages #endif @@ -1229,13 +1231,13 @@ #endif // Scroll a longer status message into view - //#define STATUS_MESSAGE_SCROLLING + #define STATUS_MESSAGE_SCROLLING // On the Info Screen, display XY with one decimal place when possible //#define LCD_DECIMAL_SMALL_XY // Add an 'M73' G-code to set the current percentage - //#define LCD_SET_PROGRESS_MANUALLY + #define LCD_SET_PROGRESS_MANUALLY // Show the E position (filament used) during printing //#define LCD_SHOW_E_TOTAL @@ -2719,7 +2721,7 @@ * Define your own with: * { , , hysteresis_start[1..8] } */ - #define CHOPPER_TIMING CHOPPER_DEFAULT_12V // All axes (override below) + #define CHOPPER_TIMING CHOPPER_DEFAULT_24V // All axes (override below) //#define CHOPPER_TIMING_X CHOPPER_TIMING // For X Axes (override below) //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X //#define CHOPPER_TIMING_Y CHOPPER_TIMING // For Y Axes (override below) diff --git a/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration.h b/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration.h index 78c2dc9160..fbf0f677fa 100644 --- a/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration.h +++ b/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Tevo/Tornado/V1 (MKS Base)" + /** * Configuration.h * @@ -69,7 +71,7 @@ // @section info // Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes. +#define STRING_CONFIG_H_AUTHOR "(thisiskeithb, Tevo Tornado V1)" // Who made the changes. //#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) /** @@ -87,7 +89,7 @@ #define SHOW_BOOTSCREEN // Show the bitmap in Marlin/_Bootscreen.h on startup. -//#define SHOW_CUSTOM_BOOTSCREEN +#define SHOW_CUSTOM_BOOTSCREEN // Show the bitmap in Marlin/_Statusscreen.h on the status screen. //#define CUSTOM_STATUS_SCREEN_IMAGE @@ -134,11 +136,11 @@ // Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_RAMPS_14_EFB + #define MOTHERBOARD BOARD_MKS_BASE_15 #endif // Name displayed in the LCD "Ready" message and Info menu -//#define CUSTOM_MACHINE_NAME "3D Printer" +#define CUSTOM_MACHINE_NAME "Tornado" // Printer's unique ID, used by some programs to differentiate between machines. // Choose your own or use a service like https://www.uuidgenerator.net/version4 @@ -424,7 +426,7 @@ #define TEMP_SENSOR_5 0 #define TEMP_SENSOR_6 0 #define TEMP_SENSOR_7 0 -#define TEMP_SENSOR_BED 0 +#define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 #define TEMP_SENSOR_COOLER 0 @@ -444,11 +446,11 @@ //#define TEMP_SENSOR_1_AS_REDUNDANT #define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10 -#define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 +#define TEMP_RESIDENCY_TIME 5 // (seconds) Time to wait for hotend to "settle" in M109 #define TEMP_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer #define TEMP_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target -#define TEMP_BED_RESIDENCY_TIME 10 // (seconds) Time to wait for bed to "settle" in M190 +#define TEMP_BED_RESIDENCY_TIME 5 // (seconds) Time to wait for bed to "settle" in M190 #define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer #define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target @@ -472,7 +474,7 @@ // Above this temperature the heater will be switched off. // This can protect components from overheating, but NOT from shorts and failures. // (Use MINTEMP for thermistor short/failure protection.) -#define HEATER_0_MAXTEMP 275 +#define HEATER_0_MAXTEMP 285 #define HEATER_1_MAXTEMP 275 #define HEATER_2_MAXTEMP 275 #define HEATER_3_MAXTEMP 275 @@ -505,21 +507,22 @@ #define PID_K1 0.95 // Smoothing factor within any PID loop #if ENABLED(PIDTEMP) - //#define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) - //#define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) + #define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) + #define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) // Set/get with gcode: M301 E[extruder number, 0-2] + // Tevo Tornado V1 #if ENABLED(PID_PARAMS_PER_HOTEND) // Specify between 1 and HOTENDS values per array. // If fewer than EXTRUDER values are provided, the last element will be repeated. - #define DEFAULT_Kp_LIST { 22.20, 22.20 } - #define DEFAULT_Ki_LIST { 1.08, 1.08 } - #define DEFAULT_Kd_LIST { 114.00, 114.00 } + #define DEFAULT_Kp_LIST { 20.37, 20.37 } + #define DEFAULT_Ki_LIST { 1.50, 1.50 } + #define DEFAULT_Kd_LIST { 69.26, 69.26 } #else - #define DEFAULT_Kp 22.20 - #define DEFAULT_Ki 1.08 - #define DEFAULT_Kd 114.00 + #define DEFAULT_Kp 20.37 + #define DEFAULT_Ki 1.50 + #define DEFAULT_Kd 69.26 #endif #endif // PIDTEMP @@ -540,7 +543,7 @@ * heater. If your configuration is significantly different than this and you don't understand * the issues involved, don't use bed PID until someone else verifies that your hardware works. */ -//#define PIDTEMPBED +#define PIDTEMPBED //#define BED_LIMIT_SWITCHING @@ -558,9 +561,9 @@ // 120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) // from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) - #define DEFAULT_bedKp 10.00 - #define DEFAULT_bedKi .023 - #define DEFAULT_bedKd 305.4 + #define DEFAULT_bedKp 128.82 + #define DEFAULT_bedKi 16.91 + #define DEFAULT_bedKd 245.36 // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. #endif // PIDTEMPBED @@ -634,7 +637,7 @@ * Note: For Bowden Extruders make this large enough to allow load/unload. */ #define PREVENT_LENGTHY_EXTRUDE -#define EXTRUDE_MAXLENGTH 200 +#define EXTRUDE_MAXLENGTH 600 //=========================================================================== //======================== Thermal Runaway Protection ======================= @@ -717,9 +720,9 @@ #endif // Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. +#define X_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Y_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Z_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. #define X_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. #define Y_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. #define Z_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. @@ -806,14 +809,14 @@ * Override with M92 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 500 } +#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 400 } /** * Default Max Feed Rate (mm/s) * Override with M203 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 } +#define DEFAULT_MAX_FEEDRATE { 250, 250, 30, 55 } //#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 #if ENABLED(LIMITED_MAX_FR_EDITING) @@ -826,7 +829,7 @@ * Override with M201 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 } +#define DEFAULT_MAX_ACCELERATION { 2000, 2000, 120, 10000 } //#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 #if ENABLED(LIMITED_MAX_ACCEL_EDITING) @@ -841,9 +844,9 @@ * M204 R Retract Acceleration * M204 T Travel Acceleration */ -#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves +#define DEFAULT_ACCELERATION 1000 // X, Y, Z and E acceleration for printing moves +#define DEFAULT_RETRACT_ACCELERATION 10000 // E acceleration for retracts +#define DEFAULT_TRAVEL_ACCELERATION 1500 // X, Y, Z acceleration for travel (non printing) moves /** * Default Jerk limits (mm/s) @@ -855,9 +858,9 @@ */ //#define CLASSIC_JERK #if ENABLED(CLASSIC_JERK) - #define DEFAULT_XJERK 10.0 - #define DEFAULT_YJERK 10.0 - #define DEFAULT_ZJERK 0.3 + #define DEFAULT_XJERK 8.0 + #define DEFAULT_YJERK 8.0 + #define DEFAULT_ZJERK 0.4 //#define TRAVEL_EXTRA_XYJERK 0.0 // Additional jerk allowance for all travel moves @@ -877,7 +880,7 @@ * https://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html */ #if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.013 // (mm) Distance from real junction edge + #define JUNCTION_DEVIATION_MM 0.026 // (mm) Distance from real junction edge #define JD_HANDLE_SMALL_SEGMENTS // Use curvature estimation instead of just the junction angle // for small segments (< 1mm) with large junction angles (> 135°). #endif @@ -890,7 +893,7 @@ * * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained */ -//#define S_CURVE_ACCELERATION +#define S_CURVE_ACCELERATION //=========================================================================== //============================= Z Probe Options ============================= @@ -1055,7 +1058,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +#define NOZZLE_TO_PROBE_OFFSET { -45, -12, -2.77 } // Most probes should stay away from the edges of the bed, but // with NOZZLE_AS_PROBE this can be negative for a wider probing area. @@ -1191,13 +1194,13 @@ // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR false -#define INVERT_Y_DIR true -#define INVERT_Z_DIR false +#define INVERT_Y_DIR false +#define INVERT_Z_DIR true // @section extruder // For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR false +#define INVERT_E0_DIR true #define INVERT_E1_DIR false #define INVERT_E2_DIR false #define INVERT_E3_DIR false @@ -1232,8 +1235,8 @@ // @section machine // The size of the printable area -#define X_BED_SIZE 200 -#define Y_BED_SIZE 200 +#define X_BED_SIZE 310 +#define Y_BED_SIZE 300 // Travel limits (mm) after homing, corresponding to endstop positions. #define X_MIN_POS 0 @@ -1241,7 +1244,7 @@ #define Z_MIN_POS 0 #define X_MAX_POS X_BED_SIZE #define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 200 +#define Z_MAX_POS 400 /** * Software Endstops @@ -1389,14 +1392,14 @@ //#define AUTO_BED_LEVELING_LINEAR //#define AUTO_BED_LEVELING_BILINEAR //#define AUTO_BED_LEVELING_UBL -//#define MESH_BED_LEVELING +#define MESH_BED_LEVELING /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable * leveling immediately after G28. */ -//#define RESTORE_LEVELING_AFTER_G28 +#define RESTORE_LEVELING_AFTER_G28 //#define ENABLE_LEVELING_AFTER_G28 /** @@ -1438,7 +1441,7 @@ /** * Enable the G26 Mesh Validation Pattern tool. */ - //#define G26_MESH_VALIDATION + #define G26_MESH_VALIDATION #if ENABLED(G26_MESH_VALIDATION) #define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle. #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for G26. @@ -1518,7 +1521,7 @@ * Add a bed leveling sub-menu for ABL or MBL. * Include a guided procedure if manual probing is enabled. */ -//#define LCD_BED_LEVELING +#define LCD_BED_LEVELING #if ENABLED(LCD_BED_LEVELING) #define MESH_EDIT_Z_STEP 0.025 // (mm) Step size while manually probing Z axis. @@ -1527,7 +1530,7 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS +#define LEVEL_BED_CORNERS #if ENABLED(LEVEL_BED_CORNERS) #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets @@ -1672,12 +1675,12 @@ * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) */ -//#define EEPROM_SETTINGS // Persistent storage with M500 and M501 +#define EEPROM_SETTINGS // Persistent storage with M500 and M501 //#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. #define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load #if ENABLED(EEPROM_SETTINGS) - //#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. + #define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. #endif // @@ -1706,10 +1709,10 @@ // Preheat Constants - Up to 5 are supported without changes // #define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 180 +#define PREHEAT_1_TEMP_HOTEND 200 #define PREHEAT_1_TEMP_BED 70 #define PREHEAT_1_TEMP_CHAMBER 35 -#define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 +#define PREHEAT_1_FAN_SPEED 255 // Value from 0 to 255 #define PREHEAT_2_LABEL "ABS" #define PREHEAT_2_TEMP_HOTEND 240 @@ -1728,7 +1731,7 @@ * P1 Raise the nozzle always to Z-park height. * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. */ -//#define NOZZLE_PARK_FEATURE +#define NOZZLE_PARK_FEATURE #if ENABLED(NOZZLE_PARK_FEATURE) // Specify a park position as { X, Y, Z_raise } @@ -1777,7 +1780,7 @@ * Caveats: The ending Z should be the same as starting Z. * Attention: EXPERIMENTAL. G-code arguments may change. */ -//#define NOZZLE_CLEAN_FEATURE +#define NOZZLE_CLEAN_FEATURE #if ENABLED(NOZZLE_CLEAN_FEATURE) // Default number of pattern repetitions @@ -1845,7 +1848,7 @@ * * View the current statistics with M78. */ -//#define PRINTCOUNTER +#define PRINTCOUNTER #if ENABLED(PRINTCOUNTER) #define PRINTCOUNTER_SAVE_INTERVAL 60 // (minutes) EEPROM save interval during print #endif @@ -1921,7 +1924,7 @@ * * :['JAPANESE', 'WESTERN', 'CYRILLIC'] */ -#define DISPLAY_CHARSET_HD44780 JAPANESE +#define DISPLAY_CHARSET_HD44780 WESTERN /** * Info Screen Style (0:Classic, 1:Průša) @@ -1936,7 +1939,7 @@ * SD Card support is disabled by default. If your controller has an SD slot, * you must uncomment the following option or it won't work. */ -//#define SDSUPPORT +#define SDSUPPORT /** * SD CARD: ENABLE CRC @@ -1960,13 +1963,13 @@ // This option overrides the default number of encoder pulses needed to // produce one step. Should be increased for high-resolution encoders. // -//#define ENCODER_PULSES_PER_STEP 4 +#define ENCODER_PULSES_PER_STEP 4 // // Use this option to override the number of step signals required to // move between next/prev menu items. // -//#define ENCODER_STEPS_PER_MENU_ITEM 1 +#define ENCODER_STEPS_PER_MENU_ITEM 1 /** * Encoder Direction Options @@ -1983,7 +1986,7 @@ // // Set this option if CLOCKWISE causes values to DECREASE // -//#define REVERSE_ENCODER_DIRECTION +#define REVERSE_ENCODER_DIRECTION // // This option reverses the encoder direction for navigating LCD menus. @@ -2006,7 +2009,7 @@ // // Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. // -//#define INDIVIDUAL_AXIS_HOMING_MENU +#define INDIVIDUAL_AXIS_HOMING_MENU // // SPEAKER/BUZZER @@ -2014,7 +2017,7 @@ // If you have a speaker that can produce tones, enable it here. // By default Marlin assumes you have a buzzer with a fixed frequency. // -//#define SPEAKER +#define SPEAKER // // The duration and frequency for the UI feedback sound. @@ -2023,8 +2026,8 @@ // Note: Test audio output with the G-Code: // M300 S P // -//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 -//#define LCD_FEEDBACK_FREQUENCY_HZ 5000 +#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 +#define LCD_FEEDBACK_FREQUENCY_HZ 5000 //============================================================================= //======================== LCD / Controller Selection ========================= @@ -2195,7 +2198,7 @@ // RepRapDiscount FULL GRAPHIC Smart Controller // https://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller // -//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER +#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER // // K.3D Full Graphic Smart Controller diff --git a/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration_adv.h b/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration_adv.h index 5335fa012a..8c5d5c7cfb 100644 --- a/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration_adv.h +++ b/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration_adv.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Tevo/Tornado/V1 (MKS Base)" + /** * Configuration_adv.h * @@ -479,7 +481,7 @@ // When first starting the main fan, run it at full speed for the // given number of milliseconds. This gets the fan spinning reliably // before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) -//#define FAN_KICKSTART_TIME 100 +#define FAN_KICKSTART_TIME 100 // Some coolers may require a non-zero "off" state. //#define FAN_OFF_PWM 1 @@ -540,7 +542,7 @@ * Multiple extruders can be assigned to the same pin in which case * the fan will turn on when any selected extruder is above the threshold. */ -#define E0_AUTO_FAN_PIN -1 +#define E0_AUTO_FAN_PIN 7 #define E1_AUTO_FAN_PIN -1 #define E2_AUTO_FAN_PIN -1 #define E3_AUTO_FAN_PIN -1 @@ -741,7 +743,7 @@ //#define HOMING_BACKOFF_POST_MM { 2, 2, 2 } // (mm) Backoff from endstops after homing -//#define QUICK_HOME // If G28 contains XY do a diagonal move first +#define QUICK_HOME // If G28 contains XY do a diagonal move first //#define HOME_Y_BEFORE_X // If G28 contains XY home Y before X //#define HOME_Z_FIRST // Home Z first. Requires a Z-MIN endstop (not a probe). //#define CODEPENDENT_XY_HOMING // If X/Y can't home without homing Y/X first @@ -867,7 +869,7 @@ // On a 300mm bed a 5% grade would give a misalignment of ~1.5cm #define G34_MAX_GRADE 5 // (%) Maximum incline that G34 will handle - #define Z_STEPPER_ALIGN_ITERATIONS 5 // Number of iterations to apply during alignment + #define Z_STEPPER_ALIGN_ITERATIONS 3 // Number of iterations to apply during alignment #define Z_STEPPER_ALIGN_ACC 0.02 // Stop iterating early if the accuracy is better than this #define RESTORE_LEVELING_AFTER_G34 // Restore leveling after G34 is done? // After G34, re-home Z (G28 Z) or just calculate it from the last probe heights? @@ -1145,8 +1147,8 @@ // Change values more rapidly when the encoder is rotated faster #define ENCODER_RATE_MULTIPLIER #if ENABLED(ENCODER_RATE_MULTIPLIER) - #define ENCODER_10X_STEPS_PER_SEC 30 // (steps/s) Encoder rate for 10x speed - #define ENCODER_100X_STEPS_PER_SEC 80 // (steps/s) Encoder rate for 100x speed + #define ENCODER_10X_STEPS_PER_SEC 75 // (steps/s) Encoder rate for 10x speed + #define ENCODER_100X_STEPS_PER_SEC 160 // (steps/s) Encoder rate for 100x speed #endif // Play a beep when the feedrate is changed from the Status Screen @@ -1175,7 +1177,7 @@ #endif // Include a page of printer information in the LCD Main Menu - //#define LCD_INFO_MENU + #define LCD_INFO_MENU #if ENABLED(LCD_INFO_MENU) //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages #endif @@ -1229,13 +1231,13 @@ #endif // Scroll a longer status message into view - //#define STATUS_MESSAGE_SCROLLING + #define STATUS_MESSAGE_SCROLLING // On the Info Screen, display XY with one decimal place when possible //#define LCD_DECIMAL_SMALL_XY // Add an 'M73' G-code to set the current percentage - //#define LCD_SET_PROGRESS_MANUALLY + #define LCD_SET_PROGRESS_MANUALLY // Show the E position (filament used) during printing //#define LCD_SHOW_E_TOTAL @@ -1361,7 +1363,7 @@ * - SDSORT_CACHE_NAMES will retain the sorted file listing in RAM. (Expensive!) * - SDSORT_DYNAMIC_RAM only uses RAM when the SD menu is visible. (Use with caution!) */ - //#define SDCARD_SORT_ALPHA + #define SDCARD_SORT_ALPHA // SD Card Sorting options #if ENABLED(SDCARD_SORT_ALPHA) @@ -1381,10 +1383,10 @@ //#define UTF_FILENAME_SUPPORT // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT + #define LONG_FILENAME_HOST_SUPPORT // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES + #define SCROLL_LONG_FILENAMES // Leave the heaters on after Stop Print (not recommended!) //#define SD_ABORT_NO_COOLDOWN @@ -1523,7 +1525,7 @@ // A bigger font is available for edit items. Costs 3120 bytes of PROGMEM. // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. - //#define USE_BIG_EDIT_FONT + #define USE_BIG_EDIT_FONT // A smaller font may be used on the Info Screen. Costs 2434 bytes of PROGMEM. // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. @@ -1572,7 +1574,7 @@ //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames - //#define STATUS_HEAT_PERCENT // Show heating in a progress bar + #define STATUS_HEAT_PERCENT // Show heating in a progress bar //#define BOOT_MARLIN_LOGO_ANIMATED // Animated Marlin logo. Costs ~‭3260 (or ~940) bytes of PROGMEM. // Frivolous Game Options @@ -1790,7 +1792,7 @@ * * Warning: Does not respect endstops! */ -//#define BABYSTEPPING +#define BABYSTEPPING #if ENABLED(BABYSTEPPING) //#define INTEGRATED_BABYSTEPPING // EXPERIMENTAL integration of babystepping into the Stepper ISR //#define BABYSTEP_WITHOUT_HOMING @@ -1801,7 +1803,7 @@ #define BABYSTEP_MULTIPLICATOR_Z 1 // (steps or mm) Steps or millimeter distance for each Z babystep #define BABYSTEP_MULTIPLICATOR_XY 1 // (steps or mm) Steps or millimeter distance for each XY babystep - //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. + #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. // Note: Extra time may be added to mitigate controller latency. @@ -1982,7 +1984,7 @@ // // G2/G3 Arc Support // -#define ARC_SUPPORT // Disable this feature to save ~3226 bytes +//#define ARC_SUPPORT // Disable this feature to save ~3226 bytes #if ENABLED(ARC_SUPPORT) #define MM_PER_ARC_SEGMENT 1 // (mm) Length (or minimum length) of each arc segment //#define ARC_SEGMENTS_PER_R 1 // Max segment length, MM_PER = Min @@ -2311,7 +2313,7 @@ * * Enable PARK_HEAD_ON_PAUSE to add the G-code M125 Pause and Park. */ -//#define ADVANCED_PAUSE_FEATURE +#define ADVANCED_PAUSE_FEATURE #if ENABLED(ADVANCED_PAUSE_FEATURE) #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. @@ -2719,7 +2721,7 @@ * Define your own with: * { , , hysteresis_start[1..8] } */ - #define CHOPPER_TIMING CHOPPER_DEFAULT_12V // All axes (override below) + #define CHOPPER_TIMING CHOPPER_DEFAULT_24V // All axes (override below) //#define CHOPPER_TIMING_X CHOPPER_TIMING // For X Axes (override below) //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X //#define CHOPPER_TIMING_Y CHOPPER_TIMING // For Y Axes (override below) diff --git a/config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration.h b/config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration.h index 78c2dc9160..04f91778b2 100644 --- a/config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration.h +++ b/config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Tevo/Tornado/V2 (MKS GEN-L)" + /** * Configuration.h * @@ -69,7 +71,7 @@ // @section info // Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes. +#define STRING_CONFIG_H_AUTHOR "(thisiskeithb, Tevo Tornado V2)" // Who made the changes. //#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) /** @@ -87,7 +89,7 @@ #define SHOW_BOOTSCREEN // Show the bitmap in Marlin/_Bootscreen.h on startup. -//#define SHOW_CUSTOM_BOOTSCREEN +#define SHOW_CUSTOM_BOOTSCREEN // Show the bitmap in Marlin/_Statusscreen.h on the status screen. //#define CUSTOM_STATUS_SCREEN_IMAGE @@ -134,11 +136,11 @@ // Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_RAMPS_14_EFB + #define MOTHERBOARD BOARD_MKS_GEN_L #endif // Name displayed in the LCD "Ready" message and Info menu -//#define CUSTOM_MACHINE_NAME "3D Printer" +#define CUSTOM_MACHINE_NAME "Tornado" // Printer's unique ID, used by some programs to differentiate between machines. // Choose your own or use a service like https://www.uuidgenerator.net/version4 @@ -424,7 +426,7 @@ #define TEMP_SENSOR_5 0 #define TEMP_SENSOR_6 0 #define TEMP_SENSOR_7 0 -#define TEMP_SENSOR_BED 0 +#define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 #define TEMP_SENSOR_COOLER 0 @@ -444,11 +446,11 @@ //#define TEMP_SENSOR_1_AS_REDUNDANT #define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10 -#define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 +#define TEMP_RESIDENCY_TIME 5 // (seconds) Time to wait for hotend to "settle" in M109 #define TEMP_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer #define TEMP_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target -#define TEMP_BED_RESIDENCY_TIME 10 // (seconds) Time to wait for bed to "settle" in M190 +#define TEMP_BED_RESIDENCY_TIME 5 // (seconds) Time to wait for bed to "settle" in M190 #define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer #define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target @@ -472,7 +474,7 @@ // Above this temperature the heater will be switched off. // This can protect components from overheating, but NOT from shorts and failures. // (Use MINTEMP for thermistor short/failure protection.) -#define HEATER_0_MAXTEMP 275 +#define HEATER_0_MAXTEMP 285 #define HEATER_1_MAXTEMP 275 #define HEATER_2_MAXTEMP 275 #define HEATER_3_MAXTEMP 275 @@ -505,21 +507,22 @@ #define PID_K1 0.95 // Smoothing factor within any PID loop #if ENABLED(PIDTEMP) - //#define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) - //#define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) + #define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) + #define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) // Set/get with gcode: M301 E[extruder number, 0-2] + // Tevo Tornado V2 #if ENABLED(PID_PARAMS_PER_HOTEND) // Specify between 1 and HOTENDS values per array. // If fewer than EXTRUDER values are provided, the last element will be repeated. - #define DEFAULT_Kp_LIST { 22.20, 22.20 } - #define DEFAULT_Ki_LIST { 1.08, 1.08 } - #define DEFAULT_Kd_LIST { 114.00, 114.00 } + #define DEFAULT_Kp_LIST { 20.37, 20.37 } + #define DEFAULT_Ki_LIST { 1.50, 1.50 } + #define DEFAULT_Kd_LIST { 69.26, 69.26 } #else - #define DEFAULT_Kp 22.20 - #define DEFAULT_Ki 1.08 - #define DEFAULT_Kd 114.00 + #define DEFAULT_Kp 20.37 + #define DEFAULT_Ki 1.50 + #define DEFAULT_Kd 69.26 #endif #endif // PIDTEMP @@ -540,7 +543,7 @@ * heater. If your configuration is significantly different than this and you don't understand * the issues involved, don't use bed PID until someone else verifies that your hardware works. */ -//#define PIDTEMPBED +#define PIDTEMPBED //#define BED_LIMIT_SWITCHING @@ -558,9 +561,9 @@ // 120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) // from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) - #define DEFAULT_bedKp 10.00 - #define DEFAULT_bedKi .023 - #define DEFAULT_bedKd 305.4 + #define DEFAULT_bedKp 128.82 + #define DEFAULT_bedKi 16.91 + #define DEFAULT_bedKd 245.36 // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. #endif // PIDTEMPBED @@ -634,7 +637,7 @@ * Note: For Bowden Extruders make this large enough to allow load/unload. */ #define PREVENT_LENGTHY_EXTRUDE -#define EXTRUDE_MAXLENGTH 200 +#define EXTRUDE_MAXLENGTH 600 //=========================================================================== //======================== Thermal Runaway Protection ======================= @@ -717,9 +720,9 @@ #endif // Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. +#define X_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Y_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Z_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. #define X_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. #define Y_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. #define Z_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. @@ -806,14 +809,14 @@ * Override with M92 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 500 } +#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 400 } /** * Default Max Feed Rate (mm/s) * Override with M203 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 } +#define DEFAULT_MAX_FEEDRATE { 250, 250, 30, 55 } //#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 #if ENABLED(LIMITED_MAX_FR_EDITING) @@ -826,7 +829,7 @@ * Override with M201 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 } +#define DEFAULT_MAX_ACCELERATION { 2000, 2000, 120, 10000 } //#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 #if ENABLED(LIMITED_MAX_ACCEL_EDITING) @@ -841,9 +844,9 @@ * M204 R Retract Acceleration * M204 T Travel Acceleration */ -#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves +#define DEFAULT_ACCELERATION 1000 // X, Y, Z and E acceleration for printing moves +#define DEFAULT_RETRACT_ACCELERATION 10000 // E acceleration for retracts +#define DEFAULT_TRAVEL_ACCELERATION 1500 // X, Y, Z acceleration for travel (non printing) moves /** * Default Jerk limits (mm/s) @@ -855,9 +858,9 @@ */ //#define CLASSIC_JERK #if ENABLED(CLASSIC_JERK) - #define DEFAULT_XJERK 10.0 - #define DEFAULT_YJERK 10.0 - #define DEFAULT_ZJERK 0.3 + #define DEFAULT_XJERK 8.0 + #define DEFAULT_YJERK 8.0 + #define DEFAULT_ZJERK 0.4 //#define TRAVEL_EXTRA_XYJERK 0.0 // Additional jerk allowance for all travel moves @@ -877,7 +880,7 @@ * https://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html */ #if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.013 // (mm) Distance from real junction edge + #define JUNCTION_DEVIATION_MM 0.026 // (mm) Distance from real junction edge #define JD_HANDLE_SMALL_SEGMENTS // Use curvature estimation instead of just the junction angle // for small segments (< 1mm) with large junction angles (> 135°). #endif @@ -890,7 +893,7 @@ * * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained */ -//#define S_CURVE_ACCELERATION +#define S_CURVE_ACCELERATION //=========================================================================== //============================= Z Probe Options ============================= @@ -1055,7 +1058,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +#define NOZZLE_TO_PROBE_OFFSET { -45, -12, -2.77 } // Most probes should stay away from the edges of the bed, but // with NOZZLE_AS_PROBE this can be negative for a wider probing area. @@ -1191,13 +1194,13 @@ // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR false -#define INVERT_Y_DIR true -#define INVERT_Z_DIR false +#define INVERT_Y_DIR false +#define INVERT_Z_DIR true // @section extruder // For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR false +#define INVERT_E0_DIR true #define INVERT_E1_DIR false #define INVERT_E2_DIR false #define INVERT_E3_DIR false @@ -1232,8 +1235,8 @@ // @section machine // The size of the printable area -#define X_BED_SIZE 200 -#define Y_BED_SIZE 200 +#define X_BED_SIZE 310 +#define Y_BED_SIZE 300 // Travel limits (mm) after homing, corresponding to endstop positions. #define X_MIN_POS 0 @@ -1241,7 +1244,7 @@ #define Z_MIN_POS 0 #define X_MAX_POS X_BED_SIZE #define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 200 +#define Z_MAX_POS 400 /** * Software Endstops @@ -1389,14 +1392,14 @@ //#define AUTO_BED_LEVELING_LINEAR //#define AUTO_BED_LEVELING_BILINEAR //#define AUTO_BED_LEVELING_UBL -//#define MESH_BED_LEVELING +#define MESH_BED_LEVELING /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable * leveling immediately after G28. */ -//#define RESTORE_LEVELING_AFTER_G28 +#define RESTORE_LEVELING_AFTER_G28 //#define ENABLE_LEVELING_AFTER_G28 /** @@ -1438,7 +1441,7 @@ /** * Enable the G26 Mesh Validation Pattern tool. */ - //#define G26_MESH_VALIDATION + #define G26_MESH_VALIDATION #if ENABLED(G26_MESH_VALIDATION) #define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle. #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for G26. @@ -1518,7 +1521,7 @@ * Add a bed leveling sub-menu for ABL or MBL. * Include a guided procedure if manual probing is enabled. */ -//#define LCD_BED_LEVELING +#define LCD_BED_LEVELING #if ENABLED(LCD_BED_LEVELING) #define MESH_EDIT_Z_STEP 0.025 // (mm) Step size while manually probing Z axis. @@ -1527,7 +1530,7 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS +#define LEVEL_BED_CORNERS #if ENABLED(LEVEL_BED_CORNERS) #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets @@ -1672,12 +1675,12 @@ * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) */ -//#define EEPROM_SETTINGS // Persistent storage with M500 and M501 +#define EEPROM_SETTINGS // Persistent storage with M500 and M501 //#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. #define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load #if ENABLED(EEPROM_SETTINGS) - //#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. + #define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. #endif // @@ -1706,10 +1709,10 @@ // Preheat Constants - Up to 5 are supported without changes // #define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 180 +#define PREHEAT_1_TEMP_HOTEND 200 #define PREHEAT_1_TEMP_BED 70 #define PREHEAT_1_TEMP_CHAMBER 35 -#define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 +#define PREHEAT_1_FAN_SPEED 255 // Value from 0 to 255 #define PREHEAT_2_LABEL "ABS" #define PREHEAT_2_TEMP_HOTEND 240 @@ -1728,7 +1731,7 @@ * P1 Raise the nozzle always to Z-park height. * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. */ -//#define NOZZLE_PARK_FEATURE +#define NOZZLE_PARK_FEATURE #if ENABLED(NOZZLE_PARK_FEATURE) // Specify a park position as { X, Y, Z_raise } @@ -1777,7 +1780,7 @@ * Caveats: The ending Z should be the same as starting Z. * Attention: EXPERIMENTAL. G-code arguments may change. */ -//#define NOZZLE_CLEAN_FEATURE +#define NOZZLE_CLEAN_FEATURE #if ENABLED(NOZZLE_CLEAN_FEATURE) // Default number of pattern repetitions @@ -1845,7 +1848,7 @@ * * View the current statistics with M78. */ -//#define PRINTCOUNTER +#define PRINTCOUNTER #if ENABLED(PRINTCOUNTER) #define PRINTCOUNTER_SAVE_INTERVAL 60 // (minutes) EEPROM save interval during print #endif @@ -1921,7 +1924,7 @@ * * :['JAPANESE', 'WESTERN', 'CYRILLIC'] */ -#define DISPLAY_CHARSET_HD44780 JAPANESE +#define DISPLAY_CHARSET_HD44780 WESTERN /** * Info Screen Style (0:Classic, 1:Průša) @@ -1936,7 +1939,7 @@ * SD Card support is disabled by default. If your controller has an SD slot, * you must uncomment the following option or it won't work. */ -//#define SDSUPPORT +#define SDSUPPORT /** * SD CARD: ENABLE CRC @@ -1960,13 +1963,13 @@ // This option overrides the default number of encoder pulses needed to // produce one step. Should be increased for high-resolution encoders. // -//#define ENCODER_PULSES_PER_STEP 4 +#define ENCODER_PULSES_PER_STEP 4 // // Use this option to override the number of step signals required to // move between next/prev menu items. // -//#define ENCODER_STEPS_PER_MENU_ITEM 1 +#define ENCODER_STEPS_PER_MENU_ITEM 1 /** * Encoder Direction Options @@ -1983,7 +1986,7 @@ // // Set this option if CLOCKWISE causes values to DECREASE // -//#define REVERSE_ENCODER_DIRECTION +#define REVERSE_ENCODER_DIRECTION // // This option reverses the encoder direction for navigating LCD menus. @@ -2006,7 +2009,7 @@ // // Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. // -//#define INDIVIDUAL_AXIS_HOMING_MENU +#define INDIVIDUAL_AXIS_HOMING_MENU // // SPEAKER/BUZZER @@ -2014,7 +2017,7 @@ // If you have a speaker that can produce tones, enable it here. // By default Marlin assumes you have a buzzer with a fixed frequency. // -//#define SPEAKER +#define SPEAKER // // The duration and frequency for the UI feedback sound. @@ -2023,8 +2026,8 @@ // Note: Test audio output with the G-Code: // M300 S P // -//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 -//#define LCD_FEEDBACK_FREQUENCY_HZ 5000 +#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 +#define LCD_FEEDBACK_FREQUENCY_HZ 5000 //============================================================================= //======================== LCD / Controller Selection ========================= @@ -2195,7 +2198,10 @@ // RepRapDiscount FULL GRAPHIC Smart Controller // https://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller // -//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER +#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER +#define ST7920_DELAY_1 DELAY_NS(150) +#define ST7920_DELAY_2 DELAY_NS(150) +#define ST7920_DELAY_3 DELAY_NS(150) // // K.3D Full Graphic Smart Controller diff --git a/config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration_adv.h b/config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration_adv.h index 5335fa012a..5319b98695 100644 --- a/config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration_adv.h +++ b/config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration_adv.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Tevo/Tornado/V2 (MKS GEN-L)" + /** * Configuration_adv.h * @@ -479,7 +481,7 @@ // When first starting the main fan, run it at full speed for the // given number of milliseconds. This gets the fan spinning reliably // before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) -//#define FAN_KICKSTART_TIME 100 +#define FAN_KICKSTART_TIME 100 // Some coolers may require a non-zero "off" state. //#define FAN_OFF_PWM 1 @@ -540,7 +542,7 @@ * Multiple extruders can be assigned to the same pin in which case * the fan will turn on when any selected extruder is above the threshold. */ -#define E0_AUTO_FAN_PIN -1 +#define E0_AUTO_FAN_PIN 7 #define E1_AUTO_FAN_PIN -1 #define E2_AUTO_FAN_PIN -1 #define E3_AUTO_FAN_PIN -1 @@ -741,7 +743,7 @@ //#define HOMING_BACKOFF_POST_MM { 2, 2, 2 } // (mm) Backoff from endstops after homing -//#define QUICK_HOME // If G28 contains XY do a diagonal move first +#define QUICK_HOME // If G28 contains XY do a diagonal move first //#define HOME_Y_BEFORE_X // If G28 contains XY home Y before X //#define HOME_Z_FIRST // Home Z first. Requires a Z-MIN endstop (not a probe). //#define CODEPENDENT_XY_HOMING // If X/Y can't home without homing Y/X first @@ -867,7 +869,7 @@ // On a 300mm bed a 5% grade would give a misalignment of ~1.5cm #define G34_MAX_GRADE 5 // (%) Maximum incline that G34 will handle - #define Z_STEPPER_ALIGN_ITERATIONS 5 // Number of iterations to apply during alignment + #define Z_STEPPER_ALIGN_ITERATIONS 3 // Number of iterations to apply during alignment #define Z_STEPPER_ALIGN_ACC 0.02 // Stop iterating early if the accuracy is better than this #define RESTORE_LEVELING_AFTER_G34 // Restore leveling after G34 is done? // After G34, re-home Z (G28 Z) or just calculate it from the last probe heights? @@ -1145,8 +1147,8 @@ // Change values more rapidly when the encoder is rotated faster #define ENCODER_RATE_MULTIPLIER #if ENABLED(ENCODER_RATE_MULTIPLIER) - #define ENCODER_10X_STEPS_PER_SEC 30 // (steps/s) Encoder rate for 10x speed - #define ENCODER_100X_STEPS_PER_SEC 80 // (steps/s) Encoder rate for 100x speed + #define ENCODER_10X_STEPS_PER_SEC 75 // (steps/s) Encoder rate for 10x speed + #define ENCODER_100X_STEPS_PER_SEC 160 // (steps/s) Encoder rate for 100x speed #endif // Play a beep when the feedrate is changed from the Status Screen @@ -1175,7 +1177,7 @@ #endif // Include a page of printer information in the LCD Main Menu - //#define LCD_INFO_MENU + #define LCD_INFO_MENU #if ENABLED(LCD_INFO_MENU) //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages #endif @@ -1229,13 +1231,13 @@ #endif // Scroll a longer status message into view - //#define STATUS_MESSAGE_SCROLLING + #define STATUS_MESSAGE_SCROLLING // On the Info Screen, display XY with one decimal place when possible //#define LCD_DECIMAL_SMALL_XY // Add an 'M73' G-code to set the current percentage - //#define LCD_SET_PROGRESS_MANUALLY + #define LCD_SET_PROGRESS_MANUALLY // Show the E position (filament used) during printing //#define LCD_SHOW_E_TOTAL @@ -1361,7 +1363,7 @@ * - SDSORT_CACHE_NAMES will retain the sorted file listing in RAM. (Expensive!) * - SDSORT_DYNAMIC_RAM only uses RAM when the SD menu is visible. (Use with caution!) */ - //#define SDCARD_SORT_ALPHA + #define SDCARD_SORT_ALPHA // SD Card Sorting options #if ENABLED(SDCARD_SORT_ALPHA) @@ -1381,10 +1383,10 @@ //#define UTF_FILENAME_SUPPORT // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT + #define LONG_FILENAME_HOST_SUPPORT // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES + #define SCROLL_LONG_FILENAMES // Leave the heaters on after Stop Print (not recommended!) //#define SD_ABORT_NO_COOLDOWN @@ -1523,7 +1525,7 @@ // A bigger font is available for edit items. Costs 3120 bytes of PROGMEM. // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. - //#define USE_BIG_EDIT_FONT + #define USE_BIG_EDIT_FONT // A smaller font may be used on the Info Screen. Costs 2434 bytes of PROGMEM. // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. @@ -1572,7 +1574,7 @@ //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames - //#define STATUS_HEAT_PERCENT // Show heating in a progress bar + #define STATUS_HEAT_PERCENT // Show heating in a progress bar //#define BOOT_MARLIN_LOGO_ANIMATED // Animated Marlin logo. Costs ~‭3260 (or ~940) bytes of PROGMEM. // Frivolous Game Options @@ -1790,7 +1792,7 @@ * * Warning: Does not respect endstops! */ -//#define BABYSTEPPING +#define BABYSTEPPING #if ENABLED(BABYSTEPPING) //#define INTEGRATED_BABYSTEPPING // EXPERIMENTAL integration of babystepping into the Stepper ISR //#define BABYSTEP_WITHOUT_HOMING @@ -1801,7 +1803,7 @@ #define BABYSTEP_MULTIPLICATOR_Z 1 // (steps or mm) Steps or millimeter distance for each Z babystep #define BABYSTEP_MULTIPLICATOR_XY 1 // (steps or mm) Steps or millimeter distance for each XY babystep - //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. + #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. // Note: Extra time may be added to mitigate controller latency. @@ -1982,7 +1984,7 @@ // // G2/G3 Arc Support // -#define ARC_SUPPORT // Disable this feature to save ~3226 bytes +//#define ARC_SUPPORT // Disable this feature to save ~3226 bytes #if ENABLED(ARC_SUPPORT) #define MM_PER_ARC_SEGMENT 1 // (mm) Length (or minimum length) of each arc segment //#define ARC_SEGMENTS_PER_R 1 // Max segment length, MM_PER = Min @@ -2311,7 +2313,7 @@ * * Enable PARK_HEAD_ON_PAUSE to add the G-code M125 Pause and Park. */ -//#define ADVANCED_PAUSE_FEATURE +#define ADVANCED_PAUSE_FEATURE #if ENABLED(ADVANCED_PAUSE_FEATURE) #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. @@ -2719,7 +2721,7 @@ * Define your own with: * { , , hysteresis_start[1..8] } */ - #define CHOPPER_TIMING CHOPPER_DEFAULT_12V // All axes (override below) + #define CHOPPER_TIMING CHOPPER_DEFAULT_24V // All axes (override below) //#define CHOPPER_TIMING_X CHOPPER_TIMING // For X Axes (override below) //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X //#define CHOPPER_TIMING_Y CHOPPER_TIMING // For Y Axes (override below) diff --git a/config/examples/TheBorg/Configuration.h b/config/examples/TheBorg/Configuration.h index 78c2dc9160..ee1aca08b7 100644 --- a/config/examples/TheBorg/Configuration.h +++ b/config/examples/TheBorg/Configuration.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "TheBorg" + /** * Configuration.h * @@ -69,7 +71,7 @@ // @section info // Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes. +#define STRING_CONFIG_H_AUTHOR "(Spawn32, The_Borg)" // Who made the changes. //#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) /** @@ -102,14 +104,14 @@ * * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] */ -#define SERIAL_PORT 0 +#define SERIAL_PORT -1 /** * Select a secondary serial port on the board to use for communication with the host. * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] */ -//#define SERIAL_PORT_2 -1 +//#define SERIAL_PORT_2 5 /** * Select a third serial port on the board to use for communication with the host. @@ -127,14 +129,14 @@ * * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ -#define BAUDRATE 250000 +#define BAUDRATE 115200 // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH // Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_RAMPS_14_EFB + #define MOTHERBOARD BOARD_THE_BORG #endif // Name displayed in the LCD "Ready" message and Info menu @@ -416,7 +418,7 @@ * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. */ -#define TEMP_SENSOR_0 1 +#define TEMP_SENSOR_0 5 #define TEMP_SENSOR_1 0 #define TEMP_SENSOR_2 0 #define TEMP_SENSOR_3 0 @@ -424,7 +426,7 @@ #define TEMP_SENSOR_5 0 #define TEMP_SENSOR_6 0 #define TEMP_SENSOR_7 0 -#define TEMP_SENSOR_BED 0 +#define TEMP_SENSOR_BED 5 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 #define TEMP_SENSOR_COOLER 0 @@ -513,13 +515,13 @@ #if ENABLED(PID_PARAMS_PER_HOTEND) // Specify between 1 and HOTENDS values per array. // If fewer than EXTRUDER values are provided, the last element will be repeated. - #define DEFAULT_Kp_LIST { 22.20, 22.20 } - #define DEFAULT_Ki_LIST { 1.08, 1.08 } - #define DEFAULT_Kd_LIST { 114.00, 114.00 } + #define DEFAULT_Kp_LIST { 18.21, 18.21 } + #define DEFAULT_Ki_LIST { 1.42, 1.42 } + #define DEFAULT_Kd_LIST { 58.34, 58.34 } #else - #define DEFAULT_Kp 22.20 - #define DEFAULT_Ki 1.08 - #define DEFAULT_Kd 114.00 + #define DEFAULT_Kp 18.21 + #define DEFAULT_Ki 1.42 + #define DEFAULT_Kd 58.34 #endif #endif // PIDTEMP @@ -558,9 +560,9 @@ // 120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) // from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) - #define DEFAULT_bedKp 10.00 - #define DEFAULT_bedKi .023 - #define DEFAULT_bedKd 305.4 + #define DEFAULT_bedKp 554.16 + #define DEFAULT_bedKi 64.07 + #define DEFAULT_bedKd 1198.25 // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. #endif // PIDTEMPBED @@ -717,13 +719,13 @@ #endif // Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define X_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_PROBE_ENDSTOP_INVERTING false // Set to true to invert the logic of the probe. +#define X_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Y_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Z_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define X_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Y_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Z_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Z_MIN_PROBE_ENDSTOP_INVERTING true // Set to true to invert the logic of the probe. /** * Stepper Drivers @@ -806,14 +808,14 @@ * Override with M92 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 500 } +#define DEFAULT_AXIS_STEPS_PER_UNIT { 200, 200, 800, 280 } /** * Default Max Feed Rate (mm/s) * Override with M203 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 } +#define DEFAULT_MAX_FEEDRATE { 500, 500, 5, 25 } //#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 #if ENABLED(LIMITED_MAX_FR_EDITING) @@ -826,7 +828,7 @@ * Override with M201 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 } +#define DEFAULT_MAX_ACCELERATION { 9000, 9000, 100, 10000 } //#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 #if ENABLED(LIMITED_MAX_ACCEL_EDITING) @@ -946,7 +948,7 @@ * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. * (e.g., an inductive probe or a nozzle-based probe-switch.) */ -//#define FIX_MOUNTED_PROBE +#define FIX_MOUNTED_PROBE /** * Use the nozzle as the probe, as with a conductive @@ -1055,7 +1057,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +#define NOZZLE_TO_PROBE_OFFSET { 32, 5, -1.3 } // Most probes should stay away from the edges of the bed, but // with NOZZLE_AS_PROBE this can be negative for a wider probing area. @@ -1106,7 +1108,7 @@ * A total of 2 does fast/slow probes with a weighted average. * A total of 3 or more adds more slow probes, taking the average. */ -//#define MULTIPLE_PROBING 2 +#define MULTIPLE_PROBING 2 //#define EXTRA_PROBING 1 /** @@ -1123,7 +1125,7 @@ * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. */ -#define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow +#define Z_CLEARANCE_DEPLOY_PROBE 5 // Z Clearance for Deploy/Stow #define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points #define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes //#define Z_AFTER_PROBING 5 // Z position after probing is done @@ -1168,10 +1170,10 @@ // For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1 // :{ 0:'Low', 1:'High' } -#define X_ENABLE_ON 0 -#define Y_ENABLE_ON 0 -#define Z_ENABLE_ON 0 -#define E_ENABLE_ON 0 // For all extruders +#define X_ENABLE_ON 1 +#define Y_ENABLE_ON 1 +#define Z_ENABLE_ON 1 +#define E_ENABLE_ON 1 // For all extruders // Disable axis steppers immediately when they're not being stepped. // WARNING: When motors turn off there is a chance of losing position accuracy! @@ -1190,9 +1192,9 @@ // @section machine // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR false +#define INVERT_X_DIR true #define INVERT_Y_DIR true -#define INVERT_Z_DIR false +#define INVERT_Z_DIR true // @section extruder @@ -1232,8 +1234,8 @@ // @section machine // The size of the printable area -#define X_BED_SIZE 200 -#define Y_BED_SIZE 200 +#define X_BED_SIZE 213 +#define Y_BED_SIZE 220 // Travel limits (mm) after homing, corresponding to endstop positions. #define X_MIN_POS 0 @@ -1587,7 +1589,7 @@ // - Move the Z probe (or nozzle) to a defined XY point before Z Homing. // - Prevent Z homing when the Z probe is outside bed area. // -//#define Z_SAFE_HOMING +#define Z_SAFE_HOMING #if ENABLED(Z_SAFE_HOMING) #define Z_SAFE_HOMING_X_POINT X_CENTER // X point for Z homing diff --git a/config/examples/TheBorg/Configuration_adv.h b/config/examples/TheBorg/Configuration_adv.h index 5335fa012a..597a868c58 100644 --- a/config/examples/TheBorg/Configuration_adv.h +++ b/config/examples/TheBorg/Configuration_adv.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "TheBorg" + /** * Configuration_adv.h * @@ -238,8 +240,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 50 // Seconds + #define THERMAL_PROTECTION_HYSTERESIS 6 // Degrees Celsius //#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops #if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP) @@ -258,7 +260,7 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 20 // Seconds + #define WATCH_TEMP_PERIOD 40 // Seconds #define WATCH_TEMP_INCREASE 2 // Degrees Celsius #endif @@ -272,7 +274,7 @@ /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds + #define WATCH_BED_TEMP_PERIOD 100 // Seconds #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius #endif @@ -648,7 +650,7 @@ // // For Z set the number of stepper drivers // -#define NUM_Z_STEPPER_DRIVERS 1 // (1-4) Z options change based on how many +#define NUM_Z_STEPPER_DRIVERS 2 // (1-4) Z options change based on how many #if NUM_Z_STEPPER_DRIVERS > 1 // Enable if Z motor direction signals are the opposite of Z1 @@ -867,7 +869,7 @@ // On a 300mm bed a 5% grade would give a misalignment of ~1.5cm #define G34_MAX_GRADE 5 // (%) Maximum incline that G34 will handle - #define Z_STEPPER_ALIGN_ITERATIONS 5 // Number of iterations to apply during alignment + #define Z_STEPPER_ALIGN_ITERATIONS 3 // Number of iterations to apply during alignment #define Z_STEPPER_ALIGN_ACC 0.02 // Stop iterating early if the accuracy is better than this #define RESTORE_LEVELING_AFTER_G34 // Restore leveling after G34 is done? // After G34, re-home Z (G28 Z) or just calculate it from the last probe heights? @@ -1776,7 +1778,7 @@ * NOTE: This method is less reliable as it can only catch hangups while * interrupts are enabled. */ -#define USE_WATCHDOG +//#define USE_WATCHDOG #if ENABLED(USE_WATCHDOG) //#define WATCHDOG_RESET_MANUAL #endif diff --git a/config/examples/TinyBoy2/Configuration.h b/config/examples/TinyBoy2/Configuration.h index 78c2dc9160..f0f1f7fb45 100644 --- a/config/examples/TinyBoy2/Configuration.h +++ b/config/examples/TinyBoy2/Configuration.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "TinyBoy2" + /** * Configuration.h * @@ -37,6 +39,22 @@ */ #define CONFIGURATION_H_VERSION 02000801 +/** + * Sample configuration file for TinyBoy2 L10/L16 + * + * Compile from Arduino or using make: + * + * ARDUINO_INSTALL_DIR=/usr/share/java/Arduino-1.6.13/ \ + * HARDWARE_MOTHERBOARD=66 \ + * PATH=/usr/avr/bin/:$PATH make + * + * Please choose your hardware options for the TinyBoy2: + */ + +#define TB2_L10 +//#define TB2_L16 +#define TB2_HEATBED_MOD + //=========================================================================== //============================= Getting Started ============================= //=========================================================================== @@ -69,7 +87,7 @@ // @section info // Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes. +#define STRING_CONFIG_H_AUTHOR "(StefanB, TinyBoy2)" // Who made the changes. //#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) /** @@ -127,18 +145,24 @@ * * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ -#define BAUDRATE 250000 +#define BAUDRATE 115200 // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH // Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_RAMPS_14_EFB + #define MOTHERBOARD BOARD_MELZI #endif // Name displayed in the LCD "Ready" message and Info menu -//#define CUSTOM_MACHINE_NAME "3D Printer" +#if ENABLED(TB2_L10) + #define CUSTOM_MACHINE_NAME "TinyBoy2 L10" +#elif ENABLED(TB2_L16) + #define CUSTOM_MACHINE_NAME "TinyBoy2 L16" +#else + #error "Please select TB2_L10 or TB2_L16" +#endif // Printer's unique ID, used by some programs to differentiate between machines. // Choose your own or use a service like https://www.uuidgenerator.net/version4 @@ -416,7 +440,7 @@ * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. */ -#define TEMP_SENSOR_0 1 +#define TEMP_SENSOR_0 5 #define TEMP_SENSOR_1 0 #define TEMP_SENSOR_2 0 #define TEMP_SENSOR_3 0 @@ -424,7 +448,12 @@ #define TEMP_SENSOR_5 0 #define TEMP_SENSOR_6 0 #define TEMP_SENSOR_7 0 -#define TEMP_SENSOR_BED 0 +#if ENABLED(TB2_HEATBED_MOD) + // K8200 Heatbed 1206/100k/3950K spare part + #define TEMP_SENSOR_BED 7 +#else + #define TEMP_SENSOR_BED 0 +#endif #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 #define TEMP_SENSOR_COOLER 0 @@ -472,7 +501,7 @@ // Above this temperature the heater will be switched off. // This can protect components from overheating, but NOT from shorts and failures. // (Use MINTEMP for thermistor short/failure protection.) -#define HEATER_0_MAXTEMP 275 +#define HEATER_0_MAXTEMP 250 #define HEATER_1_MAXTEMP 275 #define HEATER_2_MAXTEMP 275 #define HEATER_3_MAXTEMP 275 @@ -480,7 +509,7 @@ #define HEATER_5_MAXTEMP 275 #define HEATER_6_MAXTEMP 275 #define HEATER_7_MAXTEMP 275 -#define BED_MAXTEMP 150 +#define BED_MAXTEMP 100 #define CHAMBER_MAXTEMP 60 /** @@ -513,13 +542,20 @@ #if ENABLED(PID_PARAMS_PER_HOTEND) // Specify between 1 and HOTENDS values per array. // If fewer than EXTRUDER values are provided, the last element will be repeated. - #define DEFAULT_Kp_LIST { 22.20, 22.20 } - #define DEFAULT_Ki_LIST { 1.08, 1.08 } - #define DEFAULT_Kd_LIST { 114.00, 114.00 } + #define DEFAULT_Kp_LIST { 26.15, 26.15 } + #define DEFAULT_Ki_LIST { 2.71, 2.71 } + #define DEFAULT_Kd_LIST { 63.02, 63.02 } #else - #define DEFAULT_Kp 22.20 - #define DEFAULT_Ki 1.08 - #define DEFAULT_Kd 114.00 + // TinyBoy2 Extruder - calculated with PID Autotune and tested + // "M303 E0 C8 S200" + //#define DEFAULT_Kp 25.63 + //#define DEFAULT_Ki 2.66 + //#define DEFAULT_Kd 61.73 + + // TinyBoy2 Extruder - same, but with fan @ 25% duty + #define DEFAULT_Kp 26.15 + #define DEFAULT_Ki 2.71 + #define DEFAULT_Kd 63.02 #endif #endif // PIDTEMP @@ -540,7 +576,7 @@ * heater. If your configuration is significantly different than this and you don't understand * the issues involved, don't use bed PID until someone else verifies that your hardware works. */ -//#define PIDTEMPBED +#define PIDTEMPBED //#define BED_LIMIT_SWITCHING @@ -556,11 +592,17 @@ //#define MIN_BED_POWER 0 //#define PID_BED_DEBUG // Sends debug data to the serial port. - // 120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - // from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) - #define DEFAULT_bedKp 10.00 - #define DEFAULT_bedKi .023 - #define DEFAULT_bedKd 305.4 + // TinyBoy2 heatbed - calculated with PID Autotune and tested + // "M303 E-1 C8 S75" + //#define DEFAULT_bedKp 421.80 + //#define DEFAULT_bedKi 82.51 + //#define DEFAULT_bedKd 539.06 + + // TinyBoy2 heatbed - same, but with fan @ 25% duty + // "M303 E-1 C8 S75" + #define DEFAULT_bedKp 267.54 + #define DEFAULT_bedKi 52.34 + #define DEFAULT_bedKd 341.92 // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. #endif // PIDTEMPBED @@ -683,10 +725,11 @@ // Specify here all the endstop connectors that are connected to any endstop or probe. // Almost all printers will be using one per axis. Probes will use one or more of the // extra connectors. Leave undefined any used for non-endstop and non-probe purposes. -#define USE_XMIN_PLUG +// TB2 has X endstop on max, see also INVERT_X_DIR and X_HOME_DIR +//#define USE_XMIN_PLUG #define USE_YMIN_PLUG #define USE_ZMIN_PLUG -//#define USE_XMAX_PLUG +#define USE_XMAX_PLUG //#define USE_YMAX_PLUG //#define USE_ZMAX_PLUG @@ -718,9 +761,9 @@ // Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). #define X_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define X_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. +#define Y_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Z_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define X_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. #define Y_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. #define Z_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. #define Z_MIN_PROBE_ENDSTOP_INVERTING false // Set to true to invert the logic of the probe. @@ -806,14 +849,14 @@ * Override with M92 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 500 } +#define DEFAULT_AXIS_STEPS_PER_UNIT { 100, 100, 6400, 88.16 } /** * Default Max Feed Rate (mm/s) * Override with M203 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 } +#define DEFAULT_MAX_FEEDRATE { 300, 300, 7, 35 } //#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 #if ENABLED(LIMITED_MAX_FR_EDITING) @@ -1055,7 +1098,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +#define NOZZLE_TO_PROBE_OFFSET { 34, 15, 0 } // Most probes should stay away from the edges of the bed, but // with NOZZLE_AS_PROBE this can be negative for a wider probing area. @@ -1065,7 +1108,7 @@ #define XY_PROBE_FEEDRATE (133*60) // Feedrate (mm/min) for the first approach when double-probing (MULTIPLE_PROBING == 2) -#define Z_PROBE_FEEDRATE_FAST (4*60) +#define Z_PROBE_FEEDRATE_FAST (3*60) // Feedrate (mm/min) for the "accurate" probe of each point #define Z_PROBE_FEEDRATE_SLOW (Z_PROBE_FEEDRATE_FAST / 2) @@ -1190,14 +1233,14 @@ // @section machine // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR false -#define INVERT_Y_DIR true +#define INVERT_X_DIR true +#define INVERT_Y_DIR false #define INVERT_Z_DIR false // @section extruder // For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR false +#define INVERT_E0_DIR true #define INVERT_E1_DIR false #define INVERT_E2_DIR false #define INVERT_E3_DIR false @@ -1225,15 +1268,16 @@ // Direction of endstops when homing; 1=MAX, -1=MIN // :[-1,1] -#define X_HOME_DIR -1 +#define X_HOME_DIR 1 #define Y_HOME_DIR -1 #define Z_HOME_DIR -1 // @section machine // The size of the printable area -#define X_BED_SIZE 200 -#define Y_BED_SIZE 200 +// Tinyboy2: 100mm are marketed, actual length between endstop and end of rail is 98mm +#define X_BED_SIZE 98 +#define Y_BED_SIZE 98 // Travel limits (mm) after homing, corresponding to endstop positions. #define X_MIN_POS 0 @@ -1241,7 +1285,11 @@ #define Z_MIN_POS 0 #define X_MAX_POS X_BED_SIZE #define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 200 +#if ENABLED(TB2_L10) + #define Z_MAX_POS 98 +#else + #define Z_MAX_POS 158 +#endif /** * Software Endstops @@ -1595,7 +1643,7 @@ #endif // Homing speeds (mm/min) -#define HOMING_FEEDRATE_MM_M { (50*60), (50*60), (4*60) } +#define HOMING_FEEDRATE_MM_M { (40*60), (40*60), (3*60) } // Validate that endstops are triggered on homing moves #define VALIDATE_HOMING_ENDSTOPS @@ -1672,7 +1720,7 @@ * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) */ -//#define EEPROM_SETTINGS // Persistent storage with M500 and M501 +#define EEPROM_SETTINGS // Persistent storage with M500 and M501 //#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. #define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load @@ -1713,7 +1761,7 @@ #define PREHEAT_2_LABEL "ABS" #define PREHEAT_2_TEMP_HOTEND 240 -#define PREHEAT_2_TEMP_BED 110 +#define PREHEAT_2_TEMP_BED 90 // TB2: ABS default 110, 90 is the maximum temp at 12V supply #define PREHEAT_2_TEMP_CHAMBER 35 #define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 @@ -1728,7 +1776,7 @@ * P1 Raise the nozzle always to Z-park height. * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. */ -//#define NOZZLE_PARK_FEATURE +#define NOZZLE_PARK_FEATURE #if ENABLED(NOZZLE_PARK_FEATURE) // Specify a park position as { X, Y, Z_raise } @@ -1845,7 +1893,7 @@ * * View the current statistics with M78. */ -//#define PRINTCOUNTER +#define PRINTCOUNTER #if ENABLED(PRINTCOUNTER) #define PRINTCOUNTER_SAVE_INTERVAL 60 // (minutes) EEPROM save interval during print #endif @@ -1936,14 +1984,14 @@ * SD Card support is disabled by default. If your controller has an SD slot, * you must uncomment the following option or it won't work. */ -//#define SDSUPPORT +#define SDSUPPORT /** * SD CARD: ENABLE CRC * * Use CRC checks and retries on the SD communication. */ -//#define SD_CHECK_AND_RETRY +#define SD_CHECK_AND_RETRY /** * LCD Menu Items @@ -1983,7 +2031,7 @@ // // Set this option if CLOCKWISE causes values to DECREASE // -//#define REVERSE_ENCODER_DIRECTION +#define REVERSE_ENCODER_DIRECTION // // This option reverses the encoder direction for navigating LCD menus. @@ -1991,7 +2039,7 @@ // If CLOCKWISE normally moves DOWN this makes it go UP. // If CLOCKWISE normally moves UP this makes it go DOWN. // -//#define REVERSE_MENU_DIRECTION +#define REVERSE_MENU_DIRECTION // // This option reverses the encoder direction for Select Screen. @@ -2337,7 +2385,7 @@ // // TinyBoy2 128x64 OLED / Encoder Panel // -//#define OLED_PANEL_TINYBOY2 +#define OLED_PANEL_TINYBOY2 // // MKS OLED 1.3" 128×64 Full Graphics Controller diff --git a/config/examples/TinyBoy2/Configuration_adv.h b/config/examples/TinyBoy2/Configuration_adv.h index 5335fa012a..5d2561bad6 100644 --- a/config/examples/TinyBoy2/Configuration_adv.h +++ b/config/examples/TinyBoy2/Configuration_adv.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "TinyBoy2" + /** * Configuration_adv.h * @@ -867,7 +869,7 @@ // On a 300mm bed a 5% grade would give a misalignment of ~1.5cm #define G34_MAX_GRADE 5 // (%) Maximum incline that G34 will handle - #define Z_STEPPER_ALIGN_ITERATIONS 5 // Number of iterations to apply during alignment + #define Z_STEPPER_ALIGN_ITERATIONS 3 // Number of iterations to apply during alignment #define Z_STEPPER_ALIGN_ACC 0.02 // Stop iterating early if the accuracy is better than this #define RESTORE_LEVELING_AFTER_G34 // Restore leveling after G34 is done? // After G34, re-home Z (G28 Z) or just calculate it from the last probe heights? @@ -1175,7 +1177,7 @@ #endif // Include a page of printer information in the LCD Main Menu - //#define LCD_INFO_MENU + #define LCD_INFO_MENU #if ENABLED(LCD_INFO_MENU) //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages #endif @@ -1301,7 +1303,7 @@ //#define BROWSE_MEDIA_ON_INSERT // Open the file browser when media is inserted - #define EVENT_GCODE_SD_ABORT "G28XY" // G-code to run on SD Abort Print (e.g., "G28XY" or "G27") + #define EVENT_GCODE_SD_ABORT "G27" // G-code to run on SD Abort Print (e.g., "G28XY" or "G27") #if ENABLED(PRINTER_EVENT_LEDS) #define PE_LEDS_COMPLETED_TIME (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination @@ -2100,7 +2102,7 @@ // For debug-echo: 128 bytes for the optimal speed. // Other output doesn't need to be that speedy. // :[0, 2, 4, 8, 16, 32, 64, 128, 256] -#define TX_BUFFER_SIZE 0 +#define TX_BUFFER_SIZE 64 // Host Receive Buffer Size // Without XON/XOFF flow control (see SERIAL_XON_XOFF below) 32 bytes should be enough. @@ -3562,12 +3564,12 @@ #define MAIN_MENU_ITEM_2_GCODE "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND) //#define MAIN_MENU_ITEM_2_CONFIRM - //#define MAIN_MENU_ITEM_3_DESC "Preheat for " PREHEAT_2_LABEL - //#define MAIN_MENU_ITEM_3_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) + #define MAIN_MENU_ITEM_3_DESC "Preheat for " PREHEAT_2_LABEL + #define MAIN_MENU_ITEM_3_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) //#define MAIN_MENU_ITEM_3_CONFIRM - //#define MAIN_MENU_ITEM_4_DESC "Heat Bed/Home/Level" - //#define MAIN_MENU_ITEM_4_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29" + #define MAIN_MENU_ITEM_4_DESC "Heat Bed/Home/Level" + #define MAIN_MENU_ITEM_4_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29" //#define MAIN_MENU_ITEM_4_CONFIRM //#define MAIN_MENU_ITEM_5_DESC "Home & Info" diff --git a/config/examples/Tronxy/X1/Configuration.h b/config/examples/Tronxy/X1/Configuration.h index 78c2dc9160..85cde87353 100644 --- a/config/examples/Tronxy/X1/Configuration.h +++ b/config/examples/Tronxy/X1/Configuration.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Tronxy/X1" + /** * Configuration.h * @@ -69,7 +71,7 @@ // @section info // Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes. +#define STRING_CONFIG_H_AUTHOR "(Claus Naeveke, 0.1)" // Who made the changes. //#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) /** @@ -127,18 +129,18 @@ * * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ -#define BAUDRATE 250000 +#define BAUDRATE 115200 // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH // Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_RAMPS_14_EFB + #define MOTHERBOARD BOARD_MELZI #endif // Name displayed in the LCD "Ready" message and Info menu -//#define CUSTOM_MACHINE_NAME "3D Printer" +#define CUSTOM_MACHINE_NAME "Tronxy X1" // Printer's unique ID, used by some programs to differentiate between machines. // Choose your own or use a service like https://www.uuidgenerator.net/version4 @@ -416,7 +418,7 @@ * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. */ -#define TEMP_SENSOR_0 1 +#define TEMP_SENSOR_0 11 #define TEMP_SENSOR_1 0 #define TEMP_SENSOR_2 0 #define TEMP_SENSOR_3 0 @@ -472,14 +474,14 @@ // Above this temperature the heater will be switched off. // This can protect components from overheating, but NOT from shorts and failures. // (Use MINTEMP for thermistor short/failure protection.) -#define HEATER_0_MAXTEMP 275 -#define HEATER_1_MAXTEMP 275 -#define HEATER_2_MAXTEMP 275 -#define HEATER_3_MAXTEMP 275 -#define HEATER_4_MAXTEMP 275 -#define HEATER_5_MAXTEMP 275 -#define HEATER_6_MAXTEMP 275 -#define HEATER_7_MAXTEMP 275 +#define HEATER_0_MAXTEMP 260 +#define HEATER_1_MAXTEMP 260 +#define HEATER_2_MAXTEMP 260 +#define HEATER_3_MAXTEMP 260 +#define HEATER_4_MAXTEMP 260 +#define HEATER_5_MAXTEMP 260 +#define HEATER_6_MAXTEMP 260 +#define HEATER_7_MAXTEMP 260 #define BED_MAXTEMP 150 #define CHAMBER_MAXTEMP 60 @@ -510,16 +512,17 @@ //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) // Set/get with gcode: M301 E[extruder number, 0-2] + // Tronxy X1 #if ENABLED(PID_PARAMS_PER_HOTEND) // Specify between 1 and HOTENDS values per array. // If fewer than EXTRUDER values are provided, the last element will be repeated. - #define DEFAULT_Kp_LIST { 22.20, 22.20 } - #define DEFAULT_Ki_LIST { 1.08, 1.08 } - #define DEFAULT_Kd_LIST { 114.00, 114.00 } + #define DEFAULT_Kp_LIST { 16.20, 16.20 } + #define DEFAULT_Ki_LIST { 1.11, 1.11 } + #define DEFAULT_Kd_LIST { 59.06, 59.06 } #else - #define DEFAULT_Kp 22.20 - #define DEFAULT_Ki 1.08 - #define DEFAULT_Kd 114.00 + #define DEFAULT_Kp 16.20 + #define DEFAULT_Ki 1.11 + #define DEFAULT_Kd 59.06 #endif #endif // PIDTEMP @@ -717,9 +720,9 @@ #endif // Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. +#define X_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Y_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Z_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. #define X_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. #define Y_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. #define Z_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. @@ -806,14 +809,14 @@ * Override with M92 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 500 } +#define DEFAULT_AXIS_STEPS_PER_UNIT { 100, 100, 1600, 90 } /** * Default Max Feed Rate (mm/s) * Override with M203 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 } +#define DEFAULT_MAX_FEEDRATE { 400, 400, 2, 50 } //#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 #if ENABLED(LIMITED_MAX_FR_EDITING) @@ -826,7 +829,7 @@ * Override with M201 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 } +#define DEFAULT_MAX_ACCELERATION { 400, 400, 40, 5000 } //#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 #if ENABLED(LIMITED_MAX_ACCEL_EDITING) @@ -855,8 +858,8 @@ */ //#define CLASSIC_JERK #if ENABLED(CLASSIC_JERK) - #define DEFAULT_XJERK 10.0 - #define DEFAULT_YJERK 10.0 + #define DEFAULT_XJERK 20.0 + #define DEFAULT_YJERK 20.0 #define DEFAULT_ZJERK 0.3 //#define TRAVEL_EXTRA_XYJERK 0.0 // Additional jerk allowance for all travel moves @@ -877,7 +880,7 @@ * https://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html */ #if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.013 // (mm) Distance from real junction edge + #define JUNCTION_DEVIATION_MM 0.053 // (mm) Distance from real junction edge #define JD_HANDLE_SMALL_SEGMENTS // Use curvature estimation instead of just the junction angle // for small segments (< 1mm) with large junction angles (> 135°). #endif @@ -1191,8 +1194,8 @@ // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR false -#define INVERT_Y_DIR true -#define INVERT_Z_DIR false +#define INVERT_Y_DIR false +#define INVERT_Z_DIR true // @section extruder @@ -1232,16 +1235,16 @@ // @section machine // The size of the printable area -#define X_BED_SIZE 200 -#define Y_BED_SIZE 200 +#define X_BED_SIZE 150 +#define Y_BED_SIZE 150 // Travel limits (mm) after homing, corresponding to endstop positions. #define X_MIN_POS 0 -#define Y_MIN_POS 0 +#define Y_MIN_POS -10 #define Z_MIN_POS 0 #define X_MAX_POS X_BED_SIZE #define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 200 +#define Z_MAX_POS 150 /** * Software Endstops @@ -1438,7 +1441,7 @@ /** * Enable the G26 Mesh Validation Pattern tool. */ - //#define G26_MESH_VALIDATION + #define G26_MESH_VALIDATION #if ENABLED(G26_MESH_VALIDATION) #define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle. #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for G26. @@ -1527,7 +1530,7 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS +#define LEVEL_BED_CORNERS #if ENABLED(LEVEL_BED_CORNERS) #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets @@ -1672,7 +1675,7 @@ * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) */ -//#define EEPROM_SETTINGS // Persistent storage with M500 and M501 +#define EEPROM_SETTINGS // Persistent storage with M500 and M501 //#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. #define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load @@ -1936,7 +1939,7 @@ * SD Card support is disabled by default. If your controller has an SD slot, * you must uncomment the following option or it won't work. */ -//#define SDSUPPORT +#define SDSUPPORT /** * SD CARD: ENABLE CRC @@ -2092,7 +2095,7 @@ // // ANET and Tronxy 20x4 Controller // -//#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin. +#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin. // This LCD is known to be susceptible to electrical interference // which scrambles the display. Pressing any button clears it up. // This is a LCD2004 display with 5 analog buttons. diff --git a/config/examples/Tronxy/X3A/Configuration.h b/config/examples/Tronxy/X3A/Configuration.h index 78c2dc9160..d2a30200c9 100644 --- a/config/examples/Tronxy/X3A/Configuration.h +++ b/config/examples/Tronxy/X3A/Configuration.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Tronxy/X3A" + /** * Configuration.h * @@ -69,7 +71,7 @@ // @section info // Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes. +#define STRING_CONFIG_H_AUTHOR "(Schullebernd, Tronxy X3A)" // Who made the changes. //#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) /** @@ -134,11 +136,11 @@ // Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_RAMPS_14_EFB + #define MOTHERBOARD BOARD_MELZI // 63 #endif // Name displayed in the LCD "Ready" message and Info menu -//#define CUSTOM_MACHINE_NAME "3D Printer" +#define CUSTOM_MACHINE_NAME "Tronxy X3A" // Printer's unique ID, used by some programs to differentiate between machines. // Choose your own or use a service like https://www.uuidgenerator.net/version4 @@ -416,7 +418,7 @@ * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. */ -#define TEMP_SENSOR_0 1 +#define TEMP_SENSOR_0 6 #define TEMP_SENSOR_1 0 #define TEMP_SENSOR_2 0 #define TEMP_SENSOR_3 0 @@ -424,7 +426,7 @@ #define TEMP_SENSOR_5 0 #define TEMP_SENSOR_6 0 #define TEMP_SENSOR_7 0 -#define TEMP_SENSOR_BED 0 +#define TEMP_SENSOR_BED 501 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 #define TEMP_SENSOR_COOLER 0 @@ -480,7 +482,7 @@ #define HEATER_5_MAXTEMP 275 #define HEATER_6_MAXTEMP 275 #define HEATER_7_MAXTEMP 275 -#define BED_MAXTEMP 150 +#define BED_MAXTEMP 130 #define CHAMBER_MAXTEMP 60 /** @@ -542,7 +544,7 @@ */ //#define PIDTEMPBED -//#define BED_LIMIT_SWITCHING +#define BED_LIMIT_SWITCHING /** * Max Bed Power @@ -634,7 +636,7 @@ * Note: For Bowden Extruders make this large enough to allow load/unload. */ #define PREVENT_LENGTHY_EXTRUDE -#define EXTRUDE_MAXLENGTH 200 +#define EXTRUDE_MAXLENGTH 210 //=========================================================================== //======================== Thermal Runaway Protection ======================= @@ -717,13 +719,13 @@ #endif // Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. +#define X_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Y_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Z_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. #define X_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. #define Y_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. #define Z_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_PROBE_ENDSTOP_INVERTING false // Set to true to invert the logic of the probe. +#define Z_MIN_PROBE_ENDSTOP_INVERTING true // Set to true to invert the logic of the probe. /** * Stepper Drivers @@ -806,14 +808,14 @@ * Override with M92 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 500 } +#define DEFAULT_AXIS_STEPS_PER_UNIT { 100, 100, 400, 90 } /** * Default Max Feed Rate (mm/s) * Override with M203 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 } +#define DEFAULT_MAX_FEEDRATE { 400, 400, 4, 50 } //#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 #if ENABLED(LIMITED_MAX_FR_EDITING) @@ -826,7 +828,7 @@ * Override with M201 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 } +#define DEFAULT_MAX_ACCELERATION { 1000, 1000, 1500, 5000 } //#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 #if ENABLED(LIMITED_MAX_ACCEL_EDITING) @@ -841,7 +843,7 @@ * M204 R Retract Acceleration * M204 T Travel Acceleration */ -#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves +#define DEFAULT_ACCELERATION 1000 // X, Y, Z and E acceleration for printing moves #define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts #define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves @@ -855,9 +857,9 @@ */ //#define CLASSIC_JERK #if ENABLED(CLASSIC_JERK) - #define DEFAULT_XJERK 10.0 - #define DEFAULT_YJERK 10.0 - #define DEFAULT_ZJERK 0.3 + #define DEFAULT_XJERK 15.0 + #define DEFAULT_YJERK 15.0 + #define DEFAULT_ZJERK 0.4 //#define TRAVEL_EXTRA_XYJERK 0.0 // Additional jerk allowance for all travel moves @@ -877,7 +879,7 @@ * https://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html */ #if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.013 // (mm) Distance from real junction edge + #define JUNCTION_DEVIATION_MM 0.09 // (mm) Distance from real junction edge #define JD_HANDLE_SMALL_SEGMENTS // Use curvature estimation instead of just the junction angle // for small segments (< 1mm) with large junction angles (> 135°). #endif @@ -946,7 +948,7 @@ * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. * (e.g., an inductive probe or a nozzle-based probe-switch.) */ -//#define FIX_MOUNTED_PROBE +#define FIX_MOUNTED_PROBE /** * Use the nozzle as the probe, as with a conductive @@ -1055,14 +1057,14 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +#define NOZZLE_TO_PROBE_OFFSET { -32, -10, -0.5 } // Most probes should stay away from the edges of the bed, but // with NOZZLE_AS_PROBE this can be negative for a wider probing area. -#define PROBING_MARGIN 10 +#define PROBING_MARGIN 50 // X and Y axis travel speed (mm/min) between probes -#define XY_PROBE_FEEDRATE (133*60) +#define XY_PROBE_FEEDRATE (100*60) // Feedrate (mm/min) for the first approach when double-probing (MULTIPLE_PROBING == 2) #define Z_PROBE_FEEDRATE_FAST (4*60) @@ -1106,7 +1108,7 @@ * A total of 2 does fast/slow probes with a weighted average. * A total of 3 or more adds more slow probes, taking the average. */ -//#define MULTIPLE_PROBING 2 +#define MULTIPLE_PROBING 2 //#define EXTRA_PROBING 1 /** @@ -1123,10 +1125,10 @@ * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. */ -#define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow +#define Z_CLEARANCE_DEPLOY_PROBE 5 // Z Clearance for Deploy/Stow #define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points #define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes -//#define Z_AFTER_PROBING 5 // Z position after probing is done +#define Z_AFTER_PROBING 5 // Z position after probing is done #define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping @@ -1191,8 +1193,8 @@ // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR false -#define INVERT_Y_DIR true -#define INVERT_Z_DIR false +#define INVERT_Y_DIR false +#define INVERT_Z_DIR true // @section extruder @@ -1232,16 +1234,20 @@ // @section machine // The size of the printable area -#define X_BED_SIZE 200 -#define Y_BED_SIZE 200 +#define X_BED_SIZE 220 +#define Y_BED_SIZE 220 + +// Tronxy X3A specific offsets +#define TRONXY_X_BED_OFFSET -17 +#define TRONXY_Y_BED_OFFSET -25 // Travel limits (mm) after homing, corresponding to endstop positions. -#define X_MIN_POS 0 -#define Y_MIN_POS 0 +#define X_MIN_POS TRONXY_X_BED_OFFSET +#define Y_MIN_POS TRONXY_Y_BED_OFFSET #define Z_MIN_POS 0 -#define X_MAX_POS X_BED_SIZE -#define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 200 +#define X_MAX_POS X_BED_SIZE - (2 * TRONXY_X_BED_OFFSET) +#define Y_MAX_POS Y_BED_SIZE - (TRONXY_Y_BED_OFFSET + 5) +#define Z_MAX_POS 316 /** * Software Endstops @@ -1386,7 +1392,7 @@ * With an LCD controller the process is guided step-by-step. */ //#define AUTO_BED_LEVELING_3POINT -//#define AUTO_BED_LEVELING_LINEAR +#define AUTO_BED_LEVELING_LINEAR //#define AUTO_BED_LEVELING_BILINEAR //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING @@ -1574,9 +1580,9 @@ // Manually set the home position. Leave these undefined for automatic settings. // For DELTA this is the top-center of the Cartesian print volume. -//#define MANUAL_X_HOME_POS 0 -//#define MANUAL_Y_HOME_POS 0 -//#define MANUAL_Z_HOME_POS 0 +#define MANUAL_X_HOME_POS TRONXY_X_BED_OFFSET // The X3A has a standard X offset (17mm) between the left endstop and bed left bed edge +#define MANUAL_Y_HOME_POS TRONXY_Y_BED_OFFSET // The X3A has a standard Y offset (25mm) between the y endstop and the front bet edge +#define MANUAL_Z_HOME_POS 0 // Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area. // @@ -1587,7 +1593,7 @@ // - Move the Z probe (or nozzle) to a defined XY point before Z Homing. // - Prevent Z homing when the Z probe is outside bed area. // -//#define Z_SAFE_HOMING +#define Z_SAFE_HOMING #if ENABLED(Z_SAFE_HOMING) #define Z_SAFE_HOMING_X_POINT X_CENTER // X point for Z homing @@ -1595,7 +1601,7 @@ #endif // Homing speeds (mm/min) -#define HOMING_FEEDRATE_MM_M { (50*60), (50*60), (4*60) } +#define HOMING_FEEDRATE_MM_M { (100*60), (100*60), (4*60) } // Validate that endstops are triggered on homing moves #define VALIDATE_HOMING_ENDSTOPS @@ -1672,9 +1678,9 @@ * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) */ -//#define EEPROM_SETTINGS // Persistent storage with M500 and M501 +#define EEPROM_SETTINGS // Persistent storage with M500 and M501 //#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! -#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. +//#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. #define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load #if ENABLED(EEPROM_SETTINGS) //#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. @@ -1706,14 +1712,14 @@ // Preheat Constants - Up to 5 are supported without changes // #define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 180 -#define PREHEAT_1_TEMP_BED 70 +#define PREHEAT_1_TEMP_HOTEND 210 +#define PREHEAT_1_TEMP_BED 60 #define PREHEAT_1_TEMP_CHAMBER 35 #define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 #define PREHEAT_2_LABEL "ABS" -#define PREHEAT_2_TEMP_HOTEND 240 -#define PREHEAT_2_TEMP_BED 110 +#define PREHEAT_2_TEMP_HOTEND 225 +#define PREHEAT_2_TEMP_BED 85 #define PREHEAT_2_TEMP_CHAMBER 35 #define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 @@ -1936,7 +1942,7 @@ * SD Card support is disabled by default. If your controller has an SD slot, * you must uncomment the following option or it won't work. */ -//#define SDSUPPORT +#define SDSUPPORT /** * SD CARD: ENABLE CRC @@ -2092,7 +2098,7 @@ // // ANET and Tronxy 20x4 Controller // -//#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin. +#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin. // This LCD is known to be susceptible to electrical interference // which scrambles the display. Pressing any button clears it up. // This is a LCD2004 display with 5 analog buttons. diff --git a/config/examples/Tronxy/X3A/Configuration_adv.h b/config/examples/Tronxy/X3A/Configuration_adv.h index 5335fa012a..ab762f6f5c 100644 --- a/config/examples/Tronxy/X3A/Configuration_adv.h +++ b/config/examples/Tronxy/X3A/Configuration_adv.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Tronxy/X3A" + /** * Configuration_adv.h * @@ -258,8 +260,8 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 20 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // Seconds + #define WATCH_TEMP_INCREASE 10 // Degrees Celsius #endif /** @@ -267,7 +269,7 @@ */ #if ENABLED(THERMAL_PROTECTION_BED) #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_HYSTERESIS 10 // Degrees Celsius /** * As described above, except for the bed (M140/M190/M303). @@ -867,7 +869,7 @@ // On a 300mm bed a 5% grade would give a misalignment of ~1.5cm #define G34_MAX_GRADE 5 // (%) Maximum incline that G34 will handle - #define Z_STEPPER_ALIGN_ITERATIONS 5 // Number of iterations to apply during alignment + #define Z_STEPPER_ALIGN_ITERATIONS 3 // Number of iterations to apply during alignment #define Z_STEPPER_ALIGN_ACC 0.02 // Stop iterating early if the accuracy is better than this #define RESTORE_LEVELING_AFTER_G34 // Restore leveling after G34 is done? // After G34, re-home Z (G28 Z) or just calculate it from the last probe heights? diff --git a/config/examples/Tronxy/X5S-2E/Configuration.h b/config/examples/Tronxy/X5S-2E/Configuration.h index 78c2dc9160..0a30e7b8c5 100644 --- a/config/examples/Tronxy/X5S-2E/Configuration.h +++ b/config/examples/Tronxy/X5S-2E/Configuration.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Tronxy/X5S-2E" + /** * Configuration.h * @@ -69,7 +71,7 @@ // @section info // Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes. +#define STRING_CONFIG_H_AUTHOR "(Anthony Rich, OEM stock config)" // Who made the changes. //#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) /** @@ -127,18 +129,18 @@ * * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ -#define BAUDRATE 250000 +#define BAUDRATE 115200 // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH // Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_RAMPS_14_EFB + #define MOTHERBOARD BOARD_TRONXY_V3_1_0 #endif // Name displayed in the LCD "Ready" message and Info menu -//#define CUSTOM_MACHINE_NAME "3D Printer" +#define CUSTOM_MACHINE_NAME "Tronxy X5S-2E" // Printer's unique ID, used by some programs to differentiate between machines. // Choose your own or use a service like https://www.uuidgenerator.net/version4 @@ -148,13 +150,15 @@ // This defines the number of extruders // :[0, 1, 2, 3, 4, 5, 6, 7, 8] -#define EXTRUDERS 1 +#define EXTRUDERS 2 // Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc. #define DEFAULT_NOMINAL_FILAMENT_DIA 1.75 +// Tronxy X5S-2E: +// The OEM stock model uses an E3D Cyclops clone hotend (2 in 1 out, color mixing) for 1.75mm filament. // For Cyclops or any "multi-extruder" that shares a single nozzle. -//#define SINGLENOZZLE +#define SINGLENOZZLE // Save and restore temperature and fan speed on tool-change. // Set standby for the unselected tool with M104/106/109 T... @@ -424,7 +428,7 @@ #define TEMP_SENSOR_5 0 #define TEMP_SENSOR_6 0 #define TEMP_SENSOR_7 0 -#define TEMP_SENSOR_BED 0 +#define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 #define TEMP_SENSOR_COOLER 0 @@ -472,15 +476,17 @@ // Above this temperature the heater will be switched off. // This can protect components from overheating, but NOT from shorts and failures. // (Use MINTEMP for thermistor short/failure protection.) -#define HEATER_0_MAXTEMP 275 -#define HEATER_1_MAXTEMP 275 -#define HEATER_2_MAXTEMP 275 -#define HEATER_3_MAXTEMP 275 -#define HEATER_4_MAXTEMP 275 -#define HEATER_5_MAXTEMP 275 -#define HEATER_6_MAXTEMP 275 -#define HEATER_7_MAXTEMP 275 -#define BED_MAXTEMP 150 +// Tronxy X5S-2E: +// WARNING: Never exceed 260C. The OEM stock model uses low temperature heat breaks with PTFE-lining. +#define HEATER_0_MAXTEMP 260 +#define HEATER_1_MAXTEMP 260 +#define HEATER_2_MAXTEMP 260 +#define HEATER_3_MAXTEMP 260 +#define HEATER_4_MAXTEMP 260 +#define HEATER_5_MAXTEMP 260 +// Tronxy X5S-2E: +// The OEM stock model uses a clone MK3a 300 @ 12V with no insulation and can reach a maximum 70C at 25C ambient. +#define BED_MAXTEMP 81 #define CHAMBER_MAXTEMP 60 /** @@ -505,21 +511,24 @@ #define PID_K1 0.95 // Smoothing factor within any PID loop #if ENABLED(PIDTEMP) - //#define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) + #define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) //#define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) // Set/get with gcode: M301 E[extruder number, 0-2] + // Tronxy X5S-2E: + // The OEM stock model uses an E3D Cyclops clone hotend (2 in 1 out, color mixing) and a long 12V/40W heater catridge. + // Tested with command(s): "M301 P50 I5 D100" and "M303 C10 E0 S210" #if ENABLED(PID_PARAMS_PER_HOTEND) // Specify between 1 and HOTENDS values per array. // If fewer than EXTRUDER values are provided, the last element will be repeated. - #define DEFAULT_Kp_LIST { 22.20, 22.20 } - #define DEFAULT_Ki_LIST { 1.08, 1.08 } - #define DEFAULT_Kd_LIST { 114.00, 114.00 } + #define DEFAULT_Kp_LIST { 26.19, 26.19 } + #define DEFAULT_Ki_LIST { 2.41, 2.41 } + #define DEFAULT_Kd_LIST { 71.28, 71.28 } #else - #define DEFAULT_Kp 22.20 - #define DEFAULT_Ki 1.08 - #define DEFAULT_Kd 114.00 + #define DEFAULT_Kp 26.19 + #define DEFAULT_Ki 2.41 + #define DEFAULT_Kd 71.28 #endif #endif // PIDTEMP @@ -540,7 +549,7 @@ * heater. If your configuration is significantly different than this and you don't understand * the issues involved, don't use bed PID until someone else verifies that your hardware works. */ -//#define PIDTEMPBED +#define PIDTEMPBED //#define BED_LIMIT_SWITCHING @@ -556,13 +565,13 @@ //#define MIN_BED_POWER 0 //#define PID_BED_DEBUG // Sends debug data to the serial port. - // 120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - // from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) - #define DEFAULT_bedKp 10.00 - #define DEFAULT_bedKi .023 - #define DEFAULT_bedKd 305.4 + // Tronxy X5S-2E: + // The OEM stock model uses a clone MK3a 300 @ 12V with no insulation and can reach a maximum 70C at 25C ambient. + // Tested with commands: "M304 P100 I20 D500" and "M303 C10 E-1 S65" + #define DEFAULT_bedKp 379.43 + #define DEFAULT_bedKi 72.37 + #define DEFAULT_bedKd 497.33 - // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. #endif // PIDTEMPBED //=========================================================================== @@ -666,7 +675,7 @@ // Enable one of the options below for CoreXY, CoreXZ, or CoreYZ kinematics, // either in the usual order or reversed -//#define COREXY +#define COREXY //#define COREXZ //#define COREYZ //#define COREYX @@ -717,9 +726,9 @@ #endif // Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. +#define X_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Y_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Z_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. #define X_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. #define Y_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. #define Z_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. @@ -743,6 +752,8 @@ * TMC5130, TMC5130_STANDALONE, TMC5160, TMC5160_STANDALONE * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'L6474', 'POWERSTEP01', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2160', 'TMC2160_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC2209', 'TMC2209_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE', 'TMC5160', 'TMC5160_STANDALONE'] */ +// Tronxy X5S-2E: +// The OEM stock model uses HEROIC HR4982MTE982 drivers, similar to A4988 but with 2 step jumpers instead of 3. #define X_DRIVER_TYPE A4988 #define Y_DRIVER_TYPE A4988 #define Z_DRIVER_TYPE A4988 @@ -752,7 +763,7 @@ //#define Z3_DRIVER_TYPE A4988 //#define Z4_DRIVER_TYPE A4988 #define E0_DRIVER_TYPE A4988 -//#define E1_DRIVER_TYPE A4988 +#define E1_DRIVER_TYPE A4988 //#define E2_DRIVER_TYPE A4988 //#define E3_DRIVER_TYPE A4988 //#define E4_DRIVER_TYPE A4988 @@ -762,7 +773,7 @@ // Enable this feature if all enabled endstop pins are interrupt-capable. // This will remove the need to poll the interrupt pins, saving many CPU cycles. -//#define ENDSTOP_INTERRUPTS_FEATURE +#define ENDSTOP_INTERRUPTS_FEATURE /** * Endstop Noise Threshold @@ -806,7 +817,7 @@ * Override with M92 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 500 } +#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 94 } /** * Default Max Feed Rate (mm/s) @@ -826,7 +837,7 @@ * Override with M201 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 } +#define DEFAULT_MAX_ACCELERATION { 1000, 1000, 100, 1000 } //#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 #if ENABLED(LIMITED_MAX_ACCEL_EDITING) @@ -841,9 +852,9 @@ * M204 R Retract Acceleration * M204 T Travel Acceleration */ -#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves +#define DEFAULT_ACCELERATION 1000 // X, Y, Z and E acceleration for printing moves +#define DEFAULT_RETRACT_ACCELERATION 1000 // E acceleration for retracts +#define DEFAULT_TRAVEL_ACCELERATION 1000 // X, Y, Z acceleration for travel (non printing) moves /** * Default Jerk limits (mm/s) @@ -877,7 +888,7 @@ * https://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html */ #if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.013 // (mm) Distance from real junction edge + #define JUNCTION_DEVIATION_MM 0.16 // (mm) Distance from real junction edge #define JD_HANDLE_SMALL_SEGMENTS // Use curvature estimation instead of just the junction angle // for small segments (< 1mm) with large junction angles (> 135°). #endif @@ -890,7 +901,7 @@ * * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained */ -//#define S_CURVE_ACCELERATION +#define S_CURVE_ACCELERATION //=========================================================================== //============================= Z Probe Options ============================= @@ -906,7 +917,7 @@ * The probe replaces the Z-MIN endstop and is used for Z homing. * (Automatically enables USE_PROBE_FOR_Z_HOMING.) */ -#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN +//#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN // Force the use of the probe for Z-axis homing //#define USE_PROBE_FOR_Z_HOMING @@ -1190,7 +1201,7 @@ // @section machine // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR false +#define INVERT_X_DIR true #define INVERT_Y_DIR true #define INVERT_Z_DIR false @@ -1232,8 +1243,8 @@ // @section machine // The size of the printable area -#define X_BED_SIZE 200 -#define Y_BED_SIZE 200 +#define X_BED_SIZE 330 +#define Y_BED_SIZE 330 // Travel limits (mm) after homing, corresponding to endstop positions. #define X_MIN_POS 0 @@ -1241,7 +1252,7 @@ #define Z_MIN_POS 0 #define X_MAX_POS X_BED_SIZE #define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 200 +#define Z_MAX_POS 400 /** * Software Endstops @@ -1672,7 +1683,7 @@ * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) */ -//#define EEPROM_SETTINGS // Persistent storage with M500 and M501 +#define EEPROM_SETTINGS // Persistent storage with M500 and M501 //#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. #define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load @@ -1706,14 +1717,14 @@ // Preheat Constants - Up to 5 are supported without changes // #define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 180 -#define PREHEAT_1_TEMP_BED 70 +#define PREHEAT_1_TEMP_HOTEND 190 +#define PREHEAT_1_TEMP_BED 50 #define PREHEAT_1_TEMP_CHAMBER 35 #define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 #define PREHEAT_2_LABEL "ABS" -#define PREHEAT_2_TEMP_HOTEND 240 -#define PREHEAT_2_TEMP_BED 110 +#define PREHEAT_2_TEMP_HOTEND 230 +#define PREHEAT_2_TEMP_BED 70 #define PREHEAT_2_TEMP_CHAMBER 35 #define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 @@ -1728,7 +1739,7 @@ * P1 Raise the nozzle always to Z-park height. * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. */ -//#define NOZZLE_PARK_FEATURE +#define NOZZLE_PARK_FEATURE #if ENABLED(NOZZLE_PARK_FEATURE) // Specify a park position as { X, Y, Z_raise } @@ -1936,7 +1947,7 @@ * SD Card support is disabled by default. If your controller has an SD slot, * you must uncomment the following option or it won't work. */ -//#define SDSUPPORT +#define SDSUPPORT /** * SD CARD: ENABLE CRC @@ -2195,7 +2206,7 @@ // RepRapDiscount FULL GRAPHIC Smart Controller // https://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller // -//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER +#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER // // K.3D Full Graphic Smart Controller @@ -2731,12 +2742,12 @@ * Set this manually if there are extra servos needing manual control. * Set to 0 to turn off servo support. */ -//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command +#define NUM_SERVOS 2 // Servo index starts with 0 for M280 command // (ms) Delay before the next move will start, to give the servo time to reach its target angle. // 300ms is a good value but you can try less delay. // If the servo can't reach the requested position, increase it. -#define SERVO_DELAY { 300 } +#define SERVO_DELAY { 300, 300 } // Only power servos during movement, otherwise leave off to prevent jitter //#define DEACTIVATE_SERVOS_AFTER_MOVE diff --git a/config/examples/Tronxy/X5S-2E/Configuration_adv.h b/config/examples/Tronxy/X5S-2E/Configuration_adv.h index 5335fa012a..ea86aa028d 100644 --- a/config/examples/Tronxy/X5S-2E/Configuration_adv.h +++ b/config/examples/Tronxy/X5S-2E/Configuration_adv.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Tronxy/X5S-2E" + /** * Configuration_adv.h * @@ -258,7 +260,7 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 20 // Seconds + #define WATCH_TEMP_PERIOD 30 // Seconds #define WATCH_TEMP_INCREASE 2 // Degrees Celsius #endif @@ -713,7 +715,7 @@ // Remember: you should set the second extruder x-offset to 0 in your slicer. // This is the default power-up mode which can be later using M605. - #define DEFAULT_DUAL_X_CARRIAGE_MODE DXC_AUTO_PARK_MODE + #define DEFAULT_DUAL_X_CARRIAGE_MODE DXC_FULL_CONTROL_MODE // Default x offset in duplication mode (typically set to half print bed width) #define DEFAULT_DUPLICATION_X_OFFSET 100 @@ -867,7 +869,7 @@ // On a 300mm bed a 5% grade would give a misalignment of ~1.5cm #define G34_MAX_GRADE 5 // (%) Maximum incline that G34 will handle - #define Z_STEPPER_ALIGN_ITERATIONS 5 // Number of iterations to apply during alignment + #define Z_STEPPER_ALIGN_ITERATIONS 3 // Number of iterations to apply during alignment #define Z_STEPPER_ALIGN_ACC 0.02 // Stop iterating early if the accuracy is better than this #define RESTORE_LEVELING_AFTER_G34 // Restore leveling after G34 is done? // After G34, re-home Z (G28 Z) or just calculate it from the last probe heights? @@ -1175,7 +1177,7 @@ #endif // Include a page of printer information in the LCD Main Menu - //#define LCD_INFO_MENU + #define LCD_INFO_MENU #if ENABLED(LCD_INFO_MENU) //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages #endif @@ -1232,7 +1234,7 @@ //#define STATUS_MESSAGE_SCROLLING // On the Info Screen, display XY with one decimal place when possible - //#define LCD_DECIMAL_SMALL_XY + #define LCD_DECIMAL_SMALL_XY // Add an 'M73' G-code to set the current percentage //#define LCD_SET_PROGRESS_MANUALLY @@ -1287,8 +1289,8 @@ #define SD_PROCEDURE_DEPTH 1 // Increase if you need more nested M32 calls - #define SD_FINISHED_STEPPERRELEASE true // Disable steppers when SD Print is finished - #define SD_FINISHED_RELEASECOMMAND "M84" // Use "M84XYE" to keep Z enabled so your bed stays in place + #define SD_FINISHED_STEPPERRELEASE true // Disable steppers when SD Print is finished + #define SD_FINISHED_RELEASECOMMAND "M84XYE" // Use "M84XYE" to keep Z enabled so your bed stays in place // Reverse SD sort to show "more recent" files first, according to the card's FAT. // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended. @@ -1301,7 +1303,7 @@ //#define BROWSE_MEDIA_ON_INSERT // Open the file browser when media is inserted - #define EVENT_GCODE_SD_ABORT "G28XY" // G-code to run on SD Abort Print (e.g., "G28XY" or "G27") + #define EVENT_GCODE_SD_ABORT "G27" // G-code to run on SD Abort Print (e.g., "G28XY" or "G27") #if ENABLED(PRINTER_EVENT_LEDS) #define PE_LEDS_COMPLETED_TIME (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination diff --git a/config/examples/Tronxy/X5S/Configuration.h b/config/examples/Tronxy/X5S/Configuration.h index 78c2dc9160..4ba0d7a684 100644 --- a/config/examples/Tronxy/X5S/Configuration.h +++ b/config/examples/Tronxy/X5S/Configuration.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Tronxy/X5S" + /** * Configuration.h * @@ -127,18 +129,18 @@ * * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ -#define BAUDRATE 250000 +#define BAUDRATE 115200 // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH // Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_RAMPS_14_EFB + #define MOTHERBOARD BOARD_MELZI_TRONXY #endif // Name displayed in the LCD "Ready" message and Info menu -//#define CUSTOM_MACHINE_NAME "3D Printer" +#define CUSTOM_MACHINE_NAME "Tronxy X5S" // Printer's unique ID, used by some programs to differentiate between machines. // Choose your own or use a service like https://www.uuidgenerator.net/version4 @@ -424,7 +426,7 @@ #define TEMP_SENSOR_5 0 #define TEMP_SENSOR_6 0 #define TEMP_SENSOR_7 0 -#define TEMP_SENSOR_BED 0 +#define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 #define TEMP_SENSOR_COOLER 0 @@ -506,7 +508,7 @@ #if ENABLED(PIDTEMP) //#define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) - //#define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) + #define PID_AUTOTUNE_MENU // Add PID Autotune to the LCD "Temperature" menu to run M303 and apply the result. //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) // Set/get with gcode: M301 E[extruder number, 0-2] @@ -634,7 +636,7 @@ * Note: For Bowden Extruders make this large enough to allow load/unload. */ #define PREVENT_LENGTHY_EXTRUDE -#define EXTRUDE_MAXLENGTH 200 +#define EXTRUDE_MAXLENGTH 600 //=========================================================================== //======================== Thermal Runaway Protection ======================= @@ -666,7 +668,7 @@ // Enable one of the options below for CoreXY, CoreXZ, or CoreYZ kinematics, // either in the usual order or reversed -//#define COREXY +#define COREXY //#define COREXZ //#define COREYZ //#define COREYX @@ -717,13 +719,13 @@ #endif // Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define X_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_PROBE_ENDSTOP_INVERTING false // Set to true to invert the logic of the probe. +#define X_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Y_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Z_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define X_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Y_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Z_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Z_MIN_PROBE_ENDSTOP_INVERTING true // Set to true to invert the logic of the probe. /** * Stepper Drivers @@ -806,14 +808,14 @@ * Override with M92 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 500 } +#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 90 } /** * Default Max Feed Rate (mm/s) * Override with M203 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 } +#define DEFAULT_MAX_FEEDRATE { 400, 400, 4, 150 } //#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 #if ENABLED(LIMITED_MAX_FR_EDITING) @@ -826,7 +828,7 @@ * Override with M201 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 } +#define DEFAULT_MAX_ACCELERATION { 1000, 1000, 1000, 1000 } //#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 #if ENABLED(LIMITED_MAX_ACCEL_EDITING) @@ -841,9 +843,9 @@ * M204 R Retract Acceleration * M204 T Travel Acceleration */ -#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves +#define DEFAULT_ACCELERATION 1000 // X, Y, Z and E acceleration for printing moves +#define DEFAULT_RETRACT_ACCELERATION 1000 // E acceleration for retracts +#define DEFAULT_TRAVEL_ACCELERATION 1000 // X, Y, Z acceleration for travel (non printing) moves /** * Default Jerk limits (mm/s) @@ -855,9 +857,9 @@ */ //#define CLASSIC_JERK #if ENABLED(CLASSIC_JERK) - #define DEFAULT_XJERK 10.0 - #define DEFAULT_YJERK 10.0 - #define DEFAULT_ZJERK 0.3 + #define DEFAULT_XJERK 18.0 + #define DEFAULT_YJERK 18.0 + #define DEFAULT_ZJERK 0.4 //#define TRAVEL_EXTRA_XYJERK 0.0 // Additional jerk allowance for all travel moves @@ -877,7 +879,7 @@ * https://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html */ #if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.013 // (mm) Distance from real junction edge + #define JUNCTION_DEVIATION_MM 0.13 // (mm) Distance from real junction edge #define JD_HANDLE_SMALL_SEGMENTS // Use curvature estimation instead of just the junction angle // for small segments (< 1mm) with large junction angles (> 135°). #endif @@ -940,7 +942,7 @@ * Use G29 repeatedly, adjusting the Z height at each point with movement commands * or (with LCD_BED_LEVELING) the LCD controller. */ -//#define PROBE_MANUALLY +#define PROBE_MANUALLY /** * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. @@ -1055,7 +1057,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +#define NOZZLE_TO_PROBE_OFFSET { -45, -55, -0 } // Most probes should stay away from the edges of the bed, but // with NOZZLE_AS_PROBE this can be negative for a wider probing area. @@ -1190,7 +1192,7 @@ // @section machine // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR false +#define INVERT_X_DIR true #define INVERT_Y_DIR true #define INVERT_Z_DIR false @@ -1218,7 +1220,7 @@ */ //#define Z_IDLE_HEIGHT Z_HOME_POS -//#define Z_HOMING_HEIGHT 4 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ... +//#define Z_HOMING_HEIGHT 10 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ... // Be sure to have this much clearance over your Z_MAX_POS to prevent grinding. //#define Z_AFTER_HOMING 10 // (mm) Height to move to after homing Z @@ -1232,8 +1234,8 @@ // @section machine // The size of the printable area -#define X_BED_SIZE 200 -#define Y_BED_SIZE 200 +#define X_BED_SIZE 340 +#define Y_BED_SIZE 315 // Travel limits (mm) after homing, corresponding to endstop positions. #define X_MIN_POS 0 @@ -1241,7 +1243,7 @@ #define Z_MIN_POS 0 #define X_MAX_POS X_BED_SIZE #define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 200 +#define Z_MAX_POS 400 /** * Software Endstops @@ -1527,7 +1529,7 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS +#define LEVEL_BED_CORNERS #if ENABLED(LEVEL_BED_CORNERS) #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets @@ -1587,7 +1589,7 @@ // - Move the Z probe (or nozzle) to a defined XY point before Z Homing. // - Prevent Z homing when the Z probe is outside bed area. // -//#define Z_SAFE_HOMING +#define Z_SAFE_HOMING #if ENABLED(Z_SAFE_HOMING) #define Z_SAFE_HOMING_X_POINT X_CENTER // X point for Z homing @@ -1672,7 +1674,7 @@ * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) */ -//#define EEPROM_SETTINGS // Persistent storage with M500 and M501 +#define EEPROM_SETTINGS // Persistent storage with M500 and M501 //#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. #define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load @@ -1707,7 +1709,7 @@ // #define PREHEAT_1_LABEL "PLA" #define PREHEAT_1_TEMP_HOTEND 180 -#define PREHEAT_1_TEMP_BED 70 +#define PREHEAT_1_TEMP_BED 50 #define PREHEAT_1_TEMP_CHAMBER 35 #define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 @@ -1845,7 +1847,7 @@ * * View the current statistics with M78. */ -//#define PRINTCOUNTER +#define PRINTCOUNTER #if ENABLED(PRINTCOUNTER) #define PRINTCOUNTER_SAVE_INTERVAL 60 // (minutes) EEPROM save interval during print #endif @@ -1936,7 +1938,7 @@ * SD Card support is disabled by default. If your controller has an SD slot, * you must uncomment the following option or it won't work. */ -//#define SDSUPPORT +#define SDSUPPORT /** * SD CARD: ENABLE CRC @@ -2006,7 +2008,7 @@ // // Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. // -//#define INDIVIDUAL_AXIS_HOMING_MENU +#define INDIVIDUAL_AXIS_HOMING_MENU // // SPEAKER/BUZZER @@ -2195,7 +2197,7 @@ // RepRapDiscount FULL GRAPHIC Smart Controller // https://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller // -//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER +#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER // // K.3D Full Graphic Smart Controller diff --git a/config/examples/Tronxy/X5SA/Configuration.h b/config/examples/Tronxy/X5SA/Configuration.h index 78c2dc9160..d8575c0dd1 100644 --- a/config/examples/Tronxy/X5SA/Configuration.h +++ b/config/examples/Tronxy/X5SA/Configuration.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Tronxy/X5SA" + /** * Configuration.h * @@ -102,14 +104,14 @@ * * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] */ -#define SERIAL_PORT 0 +#define SERIAL_PORT 1 /** * Select a secondary serial port on the board to use for communication with the host. * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] */ -//#define SERIAL_PORT_2 -1 +#define SERIAL_PORT_2 3 /** * Select a third serial port on the board to use for communication with the host. @@ -134,11 +136,11 @@ // Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_RAMPS_14_EFB + #define MOTHERBOARD BOARD_CHITU3D_V5 #endif // Name displayed in the LCD "Ready" message and Info menu -//#define CUSTOM_MACHINE_NAME "3D Printer" +#define CUSTOM_MACHINE_NAME "Tronxy X5SA" // Printer's unique ID, used by some programs to differentiate between machines. // Choose your own or use a service like https://www.uuidgenerator.net/version4 @@ -424,7 +426,7 @@ #define TEMP_SENSOR_5 0 #define TEMP_SENSOR_6 0 #define TEMP_SENSOR_7 0 -#define TEMP_SENSOR_BED 0 +#define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 #define TEMP_SENSOR_COOLER 0 @@ -666,7 +668,7 @@ // Enable one of the options below for CoreXY, CoreXZ, or CoreYZ kinematics, // either in the usual order or reversed -//#define COREXY +#define COREXY //#define COREXZ //#define COREYZ //#define COREYX @@ -691,7 +693,7 @@ //#define USE_ZMAX_PLUG // Enable pullup for all endstops to prevent a floating state -#define ENDSTOPPULLUPS +//#define ENDSTOPPULLUPS #if DISABLED(ENDSTOPPULLUPS) // Disable ENDSTOPPULLUPS to set pullups individually //#define ENDSTOPPULLUP_XMAX @@ -717,13 +719,13 @@ #endif // Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. +#define X_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Y_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Z_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. #define X_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. #define Y_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. #define Z_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_PROBE_ENDSTOP_INVERTING false // Set to true to invert the logic of the probe. +#define Z_MIN_PROBE_ENDSTOP_INVERTING true // Set to true to invert the logic of the probe. /** * Stepper Drivers @@ -806,7 +808,9 @@ * Override with M92 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 500 } +#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 92.6 } +// TITAN EXTRUDER: +//#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 92.6 } /** * Default Max Feed Rate (mm/s) @@ -826,7 +830,7 @@ * Override with M201 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 } +#define DEFAULT_MAX_ACCELERATION { 1500, 1500, 100, 5000 } //#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 #if ENABLED(LIMITED_MAX_ACCEL_EDITING) @@ -841,9 +845,9 @@ * M204 R Retract Acceleration * M204 T Travel Acceleration */ -#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves +#define DEFAULT_ACCELERATION 1500 // X, Y, Z and E acceleration for printing moves +#define DEFAULT_RETRACT_ACCELERATION 1500 // E acceleration for retracts +#define DEFAULT_TRAVEL_ACCELERATION 1500 // X, Y, Z acceleration for travel (non printing) moves /** * Default Jerk limits (mm/s) @@ -890,7 +894,7 @@ * * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained */ -//#define S_CURVE_ACCELERATION +#define S_CURVE_ACCELERATION //=========================================================================== //============================= Z Probe Options ============================= @@ -946,7 +950,7 @@ * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. * (e.g., an inductive probe or a nozzle-based probe-switch.) */ -//#define FIX_MOUNTED_PROBE +#define FIX_MOUNTED_PROBE /** * Use the nozzle as the probe, as with a conductive @@ -1055,11 +1059,11 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +#define NOZZLE_TO_PROBE_OFFSET { -40, 0, 0 } // Most probes should stay away from the edges of the bed, but // with NOZZLE_AS_PROBE this can be negative for a wider probing area. -#define PROBING_MARGIN 10 +#define PROBING_MARGIN 50 // X and Y axis travel speed (mm/min) between probes #define XY_PROBE_FEEDRATE (133*60) @@ -1135,7 +1139,7 @@ #define Z_PROBE_OFFSET_RANGE_MAX 20 // Enable the M48 repeatability test to test probe accuracy -//#define Z_MIN_PROBE_REPEATABILITY_TEST +#define Z_MIN_PROBE_REPEATABILITY_TEST // Before deploy/stow pause for user confirmation //#define PAUSE_BEFORE_DEPLOY_STOW @@ -1190,7 +1194,7 @@ // @section machine // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR false +#define INVERT_X_DIR true #define INVERT_Y_DIR true #define INVERT_Z_DIR false @@ -1218,7 +1222,7 @@ */ //#define Z_IDLE_HEIGHT Z_HOME_POS -//#define Z_HOMING_HEIGHT 4 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ... +#define Z_HOMING_HEIGHT 10 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ... // Be sure to have this much clearance over your Z_MAX_POS to prevent grinding. //#define Z_AFTER_HOMING 10 // (mm) Height to move to after homing Z @@ -1232,8 +1236,8 @@ // @section machine // The size of the printable area -#define X_BED_SIZE 200 -#define Y_BED_SIZE 200 +#define X_BED_SIZE 330 +#define Y_BED_SIZE 330 // Travel limits (mm) after homing, corresponding to endstop positions. #define X_MIN_POS 0 @@ -1241,7 +1245,7 @@ #define Z_MIN_POS 0 #define X_MAX_POS X_BED_SIZE #define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 200 +#define Z_MAX_POS 400 /** * Software Endstops @@ -1285,13 +1289,13 @@ * RAMPS-based boards use SERVO3_PIN for the first runout sensor. * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. */ -//#define FILAMENT_RUNOUT_SENSOR +#define FILAMENT_RUNOUT_SENSOR #if ENABLED(FILAMENT_RUNOUT_SENSOR) #define FIL_RUNOUT_ENABLED_DEFAULT true // Enable the sensor on startup. Override with M412 followed by M500. #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. - #define FIL_RUNOUT_STATE LOW // Pin state indicating that filament is NOT present. - #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. + #define FIL_RUNOUT_STATE HIGH // Pin state indicating that filament is NOT present. + //#define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. //#define WATCH_ALL_RUNOUT_SENSORS // Execute runout script on any triggering sensor, not only for the active extruder. // This is automatically enabled for MIXING_EXTRUDERs. @@ -1387,7 +1391,7 @@ */ //#define AUTO_BED_LEVELING_3POINT //#define AUTO_BED_LEVELING_LINEAR -//#define AUTO_BED_LEVELING_BILINEAR +#define AUTO_BED_LEVELING_BILINEAR //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING @@ -1396,7 +1400,7 @@ * these options to restore the prior leveling state or to always enable * leveling immediately after G28. */ -//#define RESTORE_LEVELING_AFTER_G28 +#define RESTORE_LEVELING_AFTER_G28 //#define ENABLE_LEVELING_AFTER_G28 /** @@ -1454,7 +1458,7 @@ #if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR) // Set the number of grid points per dimension. - #define GRID_MAX_POINTS_X 3 + #define GRID_MAX_POINTS_X 4 #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X // Probe along the Y axis, advancing X after each column @@ -1518,7 +1522,7 @@ * Add a bed leveling sub-menu for ABL or MBL. * Include a guided procedure if manual probing is enabled. */ -//#define LCD_BED_LEVELING +#define LCD_BED_LEVELING #if ENABLED(LCD_BED_LEVELING) #define MESH_EDIT_Z_STEP 0.025 // (mm) Step size while manually probing Z axis. @@ -1527,7 +1531,7 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS +#define LEVEL_BED_CORNERS #if ENABLED(LEVEL_BED_CORNERS) #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets @@ -1587,7 +1591,7 @@ // - Move the Z probe (or nozzle) to a defined XY point before Z Homing. // - Prevent Z homing when the Z probe is outside bed area. // -//#define Z_SAFE_HOMING +#define Z_SAFE_HOMING #if ENABLED(Z_SAFE_HOMING) #define Z_SAFE_HOMING_X_POINT X_CENTER // X point for Z homing @@ -1672,12 +1676,12 @@ * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) */ -//#define EEPROM_SETTINGS // Persistent storage with M500 and M501 +#define EEPROM_SETTINGS // Persistent storage with M500 and M501 //#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. #define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load #if ENABLED(EEPROM_SETTINGS) - //#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. + #define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. #endif // @@ -1707,13 +1711,13 @@ // #define PREHEAT_1_LABEL "PLA" #define PREHEAT_1_TEMP_HOTEND 180 -#define PREHEAT_1_TEMP_BED 70 +#define PREHEAT_1_TEMP_BED 50 #define PREHEAT_1_TEMP_CHAMBER 35 #define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 #define PREHEAT_2_LABEL "ABS" #define PREHEAT_2_TEMP_HOTEND 240 -#define PREHEAT_2_TEMP_BED 110 +#define PREHEAT_2_TEMP_BED 90 #define PREHEAT_2_TEMP_CHAMBER 35 #define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 @@ -1728,7 +1732,7 @@ * P1 Raise the nozzle always to Z-park height. * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. */ -//#define NOZZLE_PARK_FEATURE +#define NOZZLE_PARK_FEATURE #if ENABLED(NOZZLE_PARK_FEATURE) // Specify a park position as { X, Y, Z_raise } @@ -1936,14 +1940,14 @@ * SD Card support is disabled by default. If your controller has an SD slot, * you must uncomment the following option or it won't work. */ -//#define SDSUPPORT +#define SDSUPPORT /** * SD CARD: ENABLE CRC * * Use CRC checks and retries on the SD communication. */ -//#define SD_CHECK_AND_RETRY +#define SD_CHECK_AND_RETRY /** * LCD Menu Items @@ -2014,7 +2018,7 @@ // If you have a speaker that can produce tones, enable it here. // By default Marlin assumes you have a buzzer with a fixed frequency. // -//#define SPEAKER +#define SPEAKER // // The duration and frequency for the UI feedback sound. @@ -2518,17 +2522,17 @@ // // Generic TFT with detailed options // -//#define TFT_GENERIC +#define TFT_GENERIC #if ENABLED(TFT_GENERIC) // :[ 'AUTO', 'ST7735', 'ST7789', 'ST7796', 'R61505', 'ILI9328', 'ILI9341', 'ILI9488' ] #define TFT_DRIVER AUTO // Interface. Enable one of the following options: - //#define TFT_INTERFACE_FSMC + #define TFT_INTERFACE_FSMC //#define TFT_INTERFACE_SPI // TFT Resolution. Enable one of the following options: - //#define TFT_RES_320x240 + #define TFT_RES_320x240 //#define TFT_RES_480x272 //#define TFT_RES_480x320 #endif @@ -2543,7 +2547,7 @@ * For LVGL_UI also copy the 'assets' folder from the build directory to the * root of your SD card, together with the compiled firmware. */ -//#define TFT_CLASSIC_UI +#define TFT_CLASSIC_UI //#define TFT_COLOR_UI //#define TFT_LVGL_UI @@ -2573,17 +2577,17 @@ // // Touch Screen Settings // -//#define TOUCH_SCREEN +#define TOUCH_SCREEN // DONE BY CHITU BOARD #if ENABLED(TOUCH_SCREEN) #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus #define TOUCH_SCREEN_CALIBRATION - //#define TOUCH_CALIBRATION_X 12316 - //#define TOUCH_CALIBRATION_Y -8981 - //#define TOUCH_OFFSET_X -43 - //#define TOUCH_OFFSET_Y 257 + #define TOUCH_CALIBRATION_X -12316 + #define TOUCH_CALIBRATION_Y 8981 + #define TOUCH_OFFSET_X 340 + #define TOUCH_OFFSET_Y -20 //#define TOUCH_ORIENTATION TOUCH_LANDSCAPE #if BOTH(TOUCH_SCREEN_CALIBRATION, EEPROM_SETTINGS) @@ -2595,6 +2599,16 @@ #endif #endif +// Change colors +// some colors are predefined, see /src/lcd/dogm/u8g_dev_tft_480~.cpp Line 160 +// or use 16bit color (e.g. 0x0000 = black, 0xFFE0 = yellow) +// see https://ee-programming-notepad.blogspot.com/2016/10/16-bit-color-generator-picker.html +#define TFT_MARLINUI_COLOR COLOR_WHITE // main foreground color +#define TFT_MARLINBG_COLOR COLOR_BLACK // background color +#define TFT_BTCANCEL_COLOR COLOR_RED // cancel button +#define TFT_BTARROWS_COLOR COLOR_WHITE // arrows up/down +#define TFT_BTOKMENU_COLOR COLOR_GREEN // enter button + // // RepRapWorld REPRAPWORLD_KEYPAD v1.1 // https://reprapworld.com/products/electronics/ramps/keypad_v1_0_fully_assembled/ @@ -2618,7 +2632,7 @@ // Use software PWM to drive the fan, as for the heaters. This uses a very low frequency // which is not as annoying as with the hardware PWM. On the other hand, if this frequency // is too low, you should also increment SOFT_PWM_SCALE. -//#define FAN_SOFT_PWM +#define FAN_SOFT_PWM // Incrementing this by 1 will double the software PWM frequency, // affecting heaters, and the fan if FAN_SOFT_PWM is enabled. diff --git a/config/examples/Tronxy/X5SA/Configuration_adv.h b/config/examples/Tronxy/X5SA/Configuration_adv.h index 5335fa012a..de9f653593 100644 --- a/config/examples/Tronxy/X5SA/Configuration_adv.h +++ b/config/examples/Tronxy/X5SA/Configuration_adv.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Tronxy/X5SA" + /** * Configuration_adv.h * @@ -461,7 +463,7 @@ * The fan turns on automatically whenever any driver is enabled and turns * off (or reduces to idle speed) shortly after drivers are turned off. */ -//#define USE_CONTROLLER_FAN +#define USE_CONTROLLER_FAN #if ENABLED(USE_CONTROLLER_FAN) //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan //#define CONTROLLER_FAN_USE_Z_ONLY // With this option only the Z axis is considered @@ -540,7 +542,7 @@ * Multiple extruders can be assigned to the same pin in which case * the fan will turn on when any selected extruder is above the threshold. */ -#define E0_AUTO_FAN_PIN -1 +#define E0_AUTO_FAN_PIN FAN2_PIN #define E1_AUTO_FAN_PIN -1 #define E2_AUTO_FAN_PIN -1 #define E3_AUTO_FAN_PIN -1 @@ -1381,7 +1383,7 @@ //#define UTF_FILENAME_SUPPORT // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT + #define LONG_FILENAME_HOST_SUPPORT // Enable this option to scroll long filenames in the SD card menu //#define SCROLL_LONG_FILENAMES @@ -1790,7 +1792,7 @@ * * Warning: Does not respect endstops! */ -//#define BABYSTEPPING +#define BABYSTEPPING #if ENABLED(BABYSTEPPING) //#define INTEGRATED_BABYSTEPPING // EXPERIMENTAL integration of babystepping into the Stepper ISR //#define BABYSTEP_WITHOUT_HOMING @@ -1798,10 +1800,10 @@ //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way //#define BABYSTEP_MILLIMETER_UNITS // Specify BABYSTEP_MULTIPLICATOR_(XY|Z) in mm instead of micro-steps - #define BABYSTEP_MULTIPLICATOR_Z 1 // (steps or mm) Steps or millimeter distance for each Z babystep + #define BABYSTEP_MULTIPLICATOR_Z 10 // (steps or mm) Steps or millimeter distance for each Z babystep #define BABYSTEP_MULTIPLICATOR_XY 1 // (steps or mm) Steps or millimeter distance for each XY babystep - //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. + #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. // Note: Extra time may be added to mitigate controller latency. @@ -1811,9 +1813,9 @@ #endif #endif - //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 + #define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 - //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping + #define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping #if ENABLED(BABYSTEP_ZPROBE_OFFSET) //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor @@ -2311,7 +2313,7 @@ * * Enable PARK_HEAD_ON_PAUSE to add the G-code M125 Pause and Park. */ -//#define ADVANCED_PAUSE_FEATURE +#define ADVANCED_PAUSE_FEATURE #if ENABLED(ADVANCED_PAUSE_FEATURE) #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. diff --git a/config/examples/Tronxy/XY100/Configuration.h b/config/examples/Tronxy/XY100/Configuration.h index 78c2dc9160..b0b4d58ea8 100644 --- a/config/examples/Tronxy/XY100/Configuration.h +++ b/config/examples/Tronxy/XY100/Configuration.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Tronxy/XY100" + /** * Configuration.h * @@ -69,7 +71,7 @@ // @section info // Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes. +#define STRING_CONFIG_H_AUTHOR "(Rob Griffiths, default config)" // Who made the changes. //#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) /** @@ -134,11 +136,11 @@ // Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_RAMPS_14_EFB + #define MOTHERBOARD BOARD_MELZI #endif // Name displayed in the LCD "Ready" message and Info menu -//#define CUSTOM_MACHINE_NAME "3D Printer" +#define CUSTOM_MACHINE_NAME "TronXY XY100" // Printer's unique ID, used by some programs to differentiate between machines. // Choose your own or use a service like https://www.uuidgenerator.net/version4 @@ -505,21 +507,28 @@ #define PID_K1 0.95 // Smoothing factor within any PID loop #if ENABLED(PIDTEMP) - //#define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) - //#define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) + #define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) + #define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) // Set/get with gcode: M301 E[extruder number, 0-2] #if ENABLED(PID_PARAMS_PER_HOTEND) // Specify between 1 and HOTENDS values per array. // If fewer than EXTRUDER values are provided, the last element will be repeated. - #define DEFAULT_Kp_LIST { 22.20, 22.20 } - #define DEFAULT_Ki_LIST { 1.08, 1.08 } - #define DEFAULT_Kd_LIST { 114.00, 114.00 } + #define DEFAULT_Kp_LIST { 7.0, 7.0 } + #define DEFAULT_Ki_LIST { 2.0, 2.0 } + #define DEFAULT_Kd_LIST { 40.0, 40.0 } #else - #define DEFAULT_Kp 22.20 - #define DEFAULT_Ki 1.08 - #define DEFAULT_Kd 114.00 + // TronXY XY-100 Standard Extruder at 210 Degree Celsius and 100% Fan + // (measured after M106 S255 with M303 E0 S210 C8) + //#define DEFAULT_Kp 20.32 + //#define DEFAULT_Ki 1.18 + //#define DEFAULT_Kd 87.80 + + // TronXY XY-100 Standard Extruder, from original firmware + #define DEFAULT_Kp 7.0 + #define DEFAULT_Ki 2.0 + #define DEFAULT_Kd 40.0 #endif #endif // PIDTEMP @@ -717,9 +726,9 @@ #endif // Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. +#define X_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Y_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Z_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. #define X_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. #define Y_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. #define Z_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. @@ -806,14 +815,14 @@ * Override with M92 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 500 } +#define DEFAULT_AXIS_STEPS_PER_UNIT { 100, 100, 1600, 90 } /** * Default Max Feed Rate (mm/s) * Override with M203 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 } +#define DEFAULT_MAX_FEEDRATE { 400, 400, 4, 50 } //#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 #if ENABLED(LIMITED_MAX_FR_EDITING) @@ -826,7 +835,7 @@ * Override with M201 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 } +#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 1000, 5000 } //#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 #if ENABLED(LIMITED_MAX_ACCEL_EDITING) @@ -841,7 +850,7 @@ * M204 R Retract Acceleration * M204 T Travel Acceleration */ -#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves +#define DEFAULT_ACCELERATION 1000 // X, Y, Z and E acceleration for printing moves #define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts #define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves @@ -877,7 +886,7 @@ * https://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html */ #if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.013 // (mm) Distance from real junction edge + #define JUNCTION_DEVIATION_MM 0.16 // (mm) Distance from real junction edge #define JD_HANDLE_SMALL_SEGMENTS // Use curvature estimation instead of just the junction angle // for small segments (< 1mm) with large junction angles (> 135°). #endif @@ -1191,8 +1200,8 @@ // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR false -#define INVERT_Y_DIR true -#define INVERT_Z_DIR false +#define INVERT_Y_DIR false +#define INVERT_Z_DIR true // @section extruder @@ -1218,7 +1227,7 @@ */ //#define Z_IDLE_HEIGHT Z_HOME_POS -//#define Z_HOMING_HEIGHT 4 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ... +#define Z_HOMING_HEIGHT 4 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ... // Be sure to have this much clearance over your Z_MAX_POS to prevent grinding. //#define Z_AFTER_HOMING 10 // (mm) Height to move to after homing Z @@ -1232,16 +1241,16 @@ // @section machine // The size of the printable area -#define X_BED_SIZE 200 -#define Y_BED_SIZE 200 +#define X_BED_SIZE 120 +#define Y_BED_SIZE 140 // Travel limits (mm) after homing, corresponding to endstop positions. -#define X_MIN_POS 0 +#define X_MIN_POS -10 #define Y_MIN_POS 0 #define Z_MIN_POS 0 #define X_MAX_POS X_BED_SIZE #define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 200 +#define Z_MAX_POS 130 /** * Software Endstops @@ -1706,7 +1715,7 @@ // Preheat Constants - Up to 5 are supported without changes // #define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 180 +#define PREHEAT_1_TEMP_HOTEND 200 #define PREHEAT_1_TEMP_BED 70 #define PREHEAT_1_TEMP_CHAMBER 35 #define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 @@ -1728,7 +1737,7 @@ * P1 Raise the nozzle always to Z-park height. * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. */ -//#define NOZZLE_PARK_FEATURE +#define NOZZLE_PARK_FEATURE #if ENABLED(NOZZLE_PARK_FEATURE) // Specify a park position as { X, Y, Z_raise } @@ -1936,7 +1945,7 @@ * SD Card support is disabled by default. If your controller has an SD slot, * you must uncomment the following option or it won't work. */ -//#define SDSUPPORT +#define SDSUPPORT /** * SD CARD: ENABLE CRC @@ -2092,7 +2101,7 @@ // // ANET and Tronxy 20x4 Controller // -//#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin. +#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin. // This LCD is known to be susceptible to electrical interference // which scrambles the display. Pressing any button clears it up. // This is a LCD2004 display with 5 analog buttons. diff --git a/config/examples/Two Trees/BlueR Plus/Configuration.h b/config/examples/Two Trees/BlueR Plus/Configuration.h index 78c2dc9160..e0da2d760a 100644 --- a/config/examples/Two Trees/BlueR Plus/Configuration.h +++ b/config/examples/Two Trees/BlueR Plus/Configuration.h @@ -21,6 +21,9 @@ */ #pragma once + +#define CONFIG_EXAMPLES_DIR "Two Trees/BlueR Plus" + /** * Configuration.h * @@ -69,7 +72,7 @@ // @section info // Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes. +#define STRING_CONFIG_H_AUTHOR "(ils15, BlueR Plus)" // Who made the changes. //#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) /** @@ -102,14 +105,14 @@ * * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] */ -#define SERIAL_PORT 0 +#define SERIAL_PORT 3 /** * Select a secondary serial port on the board to use for communication with the host. * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] */ -//#define SERIAL_PORT_2 -1 +#define SERIAL_PORT_2 1 /** * Select a third serial port on the board to use for communication with the host. @@ -134,11 +137,11 @@ // Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_RAMPS_14_EFB + #define MOTHERBOARD BOARD_MKS_ROBIN_NANO #endif // Name displayed in the LCD "Ready" message and Info menu -//#define CUSTOM_MACHINE_NAME "3D Printer" +#define CUSTOM_MACHINE_NAME "Two Trees BlueR Plus" // Printer's unique ID, used by some programs to differentiate between machines. // Choose your own or use a service like https://www.uuidgenerator.net/version4 @@ -424,7 +427,7 @@ #define TEMP_SENSOR_5 0 #define TEMP_SENSOR_6 0 #define TEMP_SENSOR_7 0 -#define TEMP_SENSOR_BED 0 +#define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 #define TEMP_SENSOR_COOLER 0 @@ -480,7 +483,7 @@ #define HEATER_5_MAXTEMP 275 #define HEATER_6_MAXTEMP 275 #define HEATER_7_MAXTEMP 275 -#define BED_MAXTEMP 150 +#define BED_MAXTEMP 120 #define CHAMBER_MAXTEMP 60 /** @@ -505,21 +508,22 @@ #define PID_K1 0.95 // Smoothing factor within any PID loop #if ENABLED(PIDTEMP) - //#define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) - //#define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) + #define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) + #define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) // Set/get with gcode: M301 E[extruder number, 0-2] #if ENABLED(PID_PARAMS_PER_HOTEND) // Specify between 1 and HOTENDS values per array. // If fewer than EXTRUDER values are provided, the last element will be repeated. - #define DEFAULT_Kp_LIST { 22.20, 22.20 } - #define DEFAULT_Ki_LIST { 1.08, 1.08 } - #define DEFAULT_Kd_LIST { 114.00, 114.00 } + #define DEFAULT_Kp_LIST { 11.03, 11.03 } + #define DEFAULT_Ki_LIST { 0.63, 0.63 } + #define DEFAULT_Kd_LIST { 48.43, 48.43 } #else - #define DEFAULT_Kp 22.20 - #define DEFAULT_Ki 1.08 - #define DEFAULT_Kd 114.00 + // Bluer + #define DEFAULT_Kp 24.6 + #define DEFAULT_Ki 2.90 + #define DEFAULT_Kd 52.3 #endif #endif // PIDTEMP @@ -540,7 +544,7 @@ * heater. If your configuration is significantly different than this and you don't understand * the issues involved, don't use bed PID until someone else verifies that your hardware works. */ -//#define PIDTEMPBED +#define PIDTEMPBED //#define BED_LIMIT_SWITCHING @@ -558,9 +562,9 @@ // 120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) // from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) - #define DEFAULT_bedKp 10.00 - #define DEFAULT_bedKi .023 - #define DEFAULT_bedKd 305.4 + #define DEFAULT_bedKp 60.1 + #define DEFAULT_bedKi 8.07 + #define DEFAULT_bedKd 298.9 // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. #endif // PIDTEMPBED @@ -634,7 +638,7 @@ * Note: For Bowden Extruders make this large enough to allow load/unload. */ #define PREVENT_LENGTHY_EXTRUDE -#define EXTRUDE_MAXLENGTH 200 +#define EXTRUDE_MAXLENGTH 600 //=========================================================================== //======================== Thermal Runaway Protection ======================= @@ -717,12 +721,12 @@ #endif // Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define X_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. +#define X_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Y_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Z_MIN_ENDSTOP_INVERTING true// Set to true to invert the logic of the endstop. +#define X_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Y_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Z_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. #define Z_MIN_PROBE_ENDSTOP_INVERTING false // Set to true to invert the logic of the probe. /** @@ -743,15 +747,15 @@ * TMC5130, TMC5130_STANDALONE, TMC5160, TMC5160_STANDALONE * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'L6474', 'POWERSTEP01', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2160', 'TMC2160_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC2209', 'TMC2209_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE', 'TMC5160', 'TMC5160_STANDALONE'] */ -#define X_DRIVER_TYPE A4988 -#define Y_DRIVER_TYPE A4988 -#define Z_DRIVER_TYPE A4988 + #define X_DRIVER_TYPE TMC2209_STANDALONE + #define Y_DRIVER_TYPE TMC2209_STANDALONE + #define Z_DRIVER_TYPE TMC2209_STANDALONE //#define X2_DRIVER_TYPE A4988 //#define Y2_DRIVER_TYPE A4988 //#define Z2_DRIVER_TYPE A4988 //#define Z3_DRIVER_TYPE A4988 //#define Z4_DRIVER_TYPE A4988 -#define E0_DRIVER_TYPE A4988 + #define E0_DRIVER_TYPE TMC2209_STANDALONE //#define E1_DRIVER_TYPE A4988 //#define E2_DRIVER_TYPE A4988 //#define E3_DRIVER_TYPE A4988 @@ -806,14 +810,14 @@ * Override with M92 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 500 } + #define DEFAULT_AXIS_STEPS_PER_UNIT { 160, 160, 400, 415 } /** * Default Max Feed Rate (mm/s) * Override with M203 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 } +#define DEFAULT_MAX_FEEDRATE { 250, 250, 10, 50 } //#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 #if ENABLED(LIMITED_MAX_FR_EDITING) @@ -841,9 +845,9 @@ * M204 R Retract Acceleration * M204 T Travel Acceleration */ -#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves +#define DEFAULT_ACCELERATION 750 // X, Y, Z and E acceleration for printing moves +#define DEFAULT_RETRACT_ACCELERATION 1000 // E acceleration for retracts +#define DEFAULT_TRAVEL_ACCELERATION 1000 // X, Y, Z acceleration for travel (non printing) moves /** * Default Jerk limits (mm/s) @@ -877,7 +881,7 @@ * https://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html */ #if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.013 // (mm) Distance from real junction edge + #define JUNCTION_DEVIATION_MM 0.3 // (mm) Distance from real junction edge #define JD_HANDLE_SMALL_SEGMENTS // Use curvature estimation instead of just the junction angle // for small segments (< 1mm) with large junction angles (> 135°). #endif @@ -890,7 +894,7 @@ * * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained */ -//#define S_CURVE_ACCELERATION +#define S_CURVE_ACCELERATION //=========================================================================== //============================= Z Probe Options ============================= @@ -906,7 +910,7 @@ * The probe replaces the Z-MIN endstop and is used for Z homing. * (Automatically enables USE_PROBE_FOR_Z_HOMING.) */ -#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN + #define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN // Force the use of the probe for Z-axis homing //#define USE_PROBE_FOR_Z_HOMING @@ -963,7 +967,8 @@ /** * The BLTouch probe uses a Hall effect sensor and emulates a servo. */ -//#define BLTOUCH + #define BLTOUCH + /** * Touch-MI Probe by hotends.fr @@ -1055,11 +1060,11 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +#define NOZZLE_TO_PROBE_OFFSET { 18, 28.5, -2.8 } // Most probes should stay away from the edges of the bed, but // with NOZZLE_AS_PROBE this can be negative for a wider probing area. -#define PROBING_MARGIN 10 +#define PROBING_MARGIN 15 // X and Y axis travel speed (mm/min) between probes #define XY_PROBE_FEEDRATE (133*60) @@ -1192,12 +1197,13 @@ // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR false #define INVERT_Y_DIR true -#define INVERT_Z_DIR false +#define INVERT_Z_DIR true // @section extruder // For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR false + +#define INVERT_E0_DIR true #define INVERT_E1_DIR false #define INVERT_E2_DIR false #define INVERT_E3_DIR false @@ -1218,30 +1224,30 @@ */ //#define Z_IDLE_HEIGHT Z_HOME_POS -//#define Z_HOMING_HEIGHT 4 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ... +#define Z_HOMING_HEIGHT 10 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ... // Be sure to have this much clearance over your Z_MAX_POS to prevent grinding. -//#define Z_AFTER_HOMING 10 // (mm) Height to move to after homing Z + //#define Z_AFTER_HOMING 10 // (mm) Height to move to after homing Z // Direction of endstops when homing; 1=MAX, -1=MIN // :[-1,1] -#define X_HOME_DIR -1 -#define Y_HOME_DIR -1 -#define Z_HOME_DIR -1 + #define X_HOME_DIR -1 + #define Y_HOME_DIR -1 + #define Z_HOME_DIR -1 // @section machine // The size of the printable area -#define X_BED_SIZE 200 -#define Y_BED_SIZE 200 +#define X_BED_SIZE 300 +#define Y_BED_SIZE 300 // Travel limits (mm) after homing, corresponding to endstop positions. #define X_MIN_POS 0 -#define Y_MIN_POS 0 +#define Y_MIN_POS -2 #define Z_MIN_POS 0 #define X_MAX_POS X_BED_SIZE #define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 200 +#define Z_MAX_POS 400 /** * Software Endstops @@ -1269,7 +1275,7 @@ #endif #if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS) - //#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD + #define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD #endif /** @@ -1285,7 +1291,7 @@ * RAMPS-based boards use SERVO3_PIN for the first runout sensor. * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. */ -//#define FILAMENT_RUNOUT_SENSOR +#define FILAMENT_RUNOUT_SENSOR #if ENABLED(FILAMENT_RUNOUT_SENSOR) #define FIL_RUNOUT_ENABLED_DEFAULT true // Enable the sensor on startup. Override with M412 followed by M500. #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. @@ -1387,16 +1393,15 @@ */ //#define AUTO_BED_LEVELING_3POINT //#define AUTO_BED_LEVELING_LINEAR -//#define AUTO_BED_LEVELING_BILINEAR //#define AUTO_BED_LEVELING_UBL -//#define MESH_BED_LEVELING + #define AUTO_BED_LEVELING_BILINEAR /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable * leveling immediately after G28. */ -//#define RESTORE_LEVELING_AFTER_G28 +#define RESTORE_LEVELING_AFTER_G28 //#define ENABLE_LEVELING_AFTER_G28 /** @@ -1464,13 +1469,13 @@ // Beyond the probed grid, continue the implied tilt? // Default is to maintain the height of the nearest edge. - //#define EXTRAPOLATE_BEYOND_GRID + #define EXTRAPOLATE_BEYOND_GRID // // Experimental Subdivision of the grid by Catmull-Rom method. // Synthesizes intermediate points to produce a more detailed mesh. // - //#define ABL_BILINEAR_SUBDIVISION + #define ABL_BILINEAR_SUBDIVISION #if ENABLED(ABL_BILINEAR_SUBDIVISION) // Number of subdivisions between probe points #define BILINEAR_SUBDIVISIONS 3 @@ -1506,7 +1511,7 @@ //=================================== Mesh ================================== //=========================================================================== - #define MESH_INSET 10 // Set Mesh bounds as an inset region of the bed + #define MESH_INSET 15 // Set Mesh bounds as an inset region of the bed #define GRID_MAX_POINTS_X 3 // Don't use more than 7 points per axis, implementation limited. #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X @@ -1518,22 +1523,22 @@ * Add a bed leveling sub-menu for ABL or MBL. * Include a guided procedure if manual probing is enabled. */ -//#define LCD_BED_LEVELING +#define LCD_BED_LEVELING #if ENABLED(LCD_BED_LEVELING) #define MESH_EDIT_Z_STEP 0.025 // (mm) Step size while manually probing Z axis. #define LCD_PROBE_Z_RANGE 4 // (mm) Z Range centered on Z_MIN_POS for LCD Z adjustment - //#define MESH_EDIT_MENU // Add a menu to edit mesh points + #define MESH_EDIT_MENU // Add a menu to edit mesh points #endif // Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS +#define LEVEL_BED_CORNERS #if ENABLED(LEVEL_BED_CORNERS) #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner + #define LEVEL_CORNERS_Z_HOP 10 // (mm) Z height of nozzle between leveling points + #define LEVEL_CENTER_TOO // Move to the center after the last corner //#define LEVEL_CORNERS_USE_PROBE #if ENABLED(LEVEL_CORNERS_USE_PROBE) #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 @@ -1587,7 +1592,8 @@ // - Move the Z probe (or nozzle) to a defined XY point before Z Homing. // - Prevent Z homing when the Z probe is outside bed area. // -//#define Z_SAFE_HOMING + #define Z_SAFE_HOMING + #if ENABLED(Z_SAFE_HOMING) #define Z_SAFE_HOMING_X_POINT X_CENTER // X point for Z homing @@ -1672,7 +1678,7 @@ * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) */ -//#define EEPROM_SETTINGS // Persistent storage with M500 and M501 +#define EEPROM_SETTINGS // Persistent storage with M500 and M501 //#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. #define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load @@ -1706,7 +1712,7 @@ // Preheat Constants - Up to 5 are supported without changes // #define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 180 +#define PREHEAT_1_TEMP_HOTEND 200 #define PREHEAT_1_TEMP_BED 70 #define PREHEAT_1_TEMP_CHAMBER 35 #define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 @@ -1728,7 +1734,7 @@ * P1 Raise the nozzle always to Z-park height. * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. */ -//#define NOZZLE_PARK_FEATURE +#define NOZZLE_PARK_FEATURE #if ENABLED(NOZZLE_PARK_FEATURE) // Specify a park position as { X, Y, Z_raise } @@ -1845,7 +1851,7 @@ * * View the current statistics with M78. */ -//#define PRINTCOUNTER +#define PRINTCOUNTER #if ENABLED(PRINTCOUNTER) #define PRINTCOUNTER_SAVE_INTERVAL 60 // (minutes) EEPROM save interval during print #endif @@ -1936,7 +1942,7 @@ * SD Card support is disabled by default. If your controller has an SD slot, * you must uncomment the following option or it won't work. */ -//#define SDSUPPORT +#define SDSUPPORT /** * SD CARD: ENABLE CRC @@ -2006,7 +2012,7 @@ // // Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. // -//#define INDIVIDUAL_AXIS_HOMING_MENU +#define INDIVIDUAL_AXIS_HOMING_MENU // // SPEAKER/BUZZER @@ -2477,7 +2483,7 @@ // // 480x272, 4.3", FSMC Display From MKS // -//#define MKS_ROBIN_TFT43 +#define MKS_ROBIN_TFT43 // // 320x240, 3.2", FSMC Display From MKS @@ -2524,12 +2530,12 @@ #define TFT_DRIVER AUTO // Interface. Enable one of the following options: - //#define TFT_INTERFACE_FSMC + #define TFT_INTERFACE_FSMC //#define TFT_INTERFACE_SPI // TFT Resolution. Enable one of the following options: //#define TFT_RES_320x240 - //#define TFT_RES_480x272 + #define TFT_RES_480x272 //#define TFT_RES_480x320 #endif @@ -2544,7 +2550,7 @@ * root of your SD card, together with the compiled firmware. */ //#define TFT_CLASSIC_UI -//#define TFT_COLOR_UI +#define TFT_COLOR_UI //#define TFT_LVGL_UI #if ENABLED(TFT_LVGL_UI) @@ -2559,7 +2565,7 @@ * TFT_ROTATE_270, TFT_ROTATE_270_MIRROR_X, TFT_ROTATE_270_MIRROR_Y, * TFT_MIRROR_X, TFT_MIRROR_Y, TFT_NO_ROTATION */ -//#define TFT_ROTATION TFT_NO_ROTATION +#define TFT_ROTATION TFT_ROTATE_180 //============================================================================= //============================ Other Controllers ============================ @@ -2573,17 +2579,18 @@ // // Touch Screen Settings // -//#define TOUCH_SCREEN +#define TOUCH_SCREEN #if ENABLED(TOUCH_SCREEN) #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus #define TOUCH_SCREEN_CALIBRATION - //#define TOUCH_CALIBRATION_X 12316 - //#define TOUCH_CALIBRATION_Y -8981 - //#define TOUCH_OFFSET_X -43 - //#define TOUCH_OFFSET_Y 257 + // XPT2046 Touch Screen calibration + #define TOUCH_CALIBRATION_X 16128 + #define TOUCH_CALIBRATION_Y 10841 + #define TOUCH_OFFSET_X -13 + #define TOUCH_OFFSET_Y -36 //#define TOUCH_ORIENTATION TOUCH_LANDSCAPE #if BOTH(TOUCH_SCREEN_CALIBRATION, EEPROM_SETTINGS) diff --git a/config/examples/Two Trees/BlueR Plus/Configuration_adv.h b/config/examples/Two Trees/BlueR Plus/Configuration_adv.h index 5335fa012a..9a6ec7a7a5 100644 --- a/config/examples/Two Trees/BlueR Plus/Configuration_adv.h +++ b/config/examples/Two Trees/BlueR Plus/Configuration_adv.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Two Trees/BlueR Plus" + /** * Configuration_adv.h * @@ -266,8 +268,8 @@ * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 40 // Seconds + #define THERMAL_PROTECTION_BED_HYSTERESIS 5 // Degrees Celsius /** * As described above, except for the bed (M140/M190/M303). @@ -437,9 +439,9 @@ * Hotend Idle Timeout * Prevent filament in the nozzle from charring and causing a critical jam. */ -//#define HOTEND_IDLE_TIMEOUT +#define HOTEND_IDLE_TIMEOUT #if ENABLED(HOTEND_IDLE_TIMEOUT) - #define HOTEND_IDLE_TIMEOUT_SEC (5*60) // (seconds) Time without extruder movement to trigger protection + #define HOTEND_IDLE_TIMEOUT_SEC (15*60) // (seconds) Time without extruder movement to trigger protection #define HOTEND_IDLE_MIN_TRIGGER 180 // (°C) Minimum temperature to enable hotend protection #define HOTEND_IDLE_NOZZLE_TARGET 0 // (°C) Safe temperature for the nozzle after timeout #define HOTEND_IDLE_BED_TARGET 0 // (°C) Safe temperature for the bed after timeout @@ -540,7 +542,7 @@ * Multiple extruders can be assigned to the same pin in which case * the fan will turn on when any selected extruder is above the threshold. */ -#define E0_AUTO_FAN_PIN -1 +#define E0_AUTO_FAN_PIN FAN1_PIN #define E1_AUTO_FAN_PIN -1 #define E2_AUTO_FAN_PIN -1 #define E3_AUTO_FAN_PIN -1 @@ -741,7 +743,7 @@ //#define HOMING_BACKOFF_POST_MM { 2, 2, 2 } // (mm) Backoff from endstops after homing -//#define QUICK_HOME // If G28 contains XY do a diagonal move first +#define QUICK_HOME // If G28 contains XY do a diagonal move first //#define HOME_Y_BEFORE_X // If G28 contains XY home Y before X //#define HOME_Z_FIRST // Home Z first. Requires a Z-MIN endstop (not a probe). //#define CODEPENDENT_XY_HOMING // If X/Y can't home without homing Y/X first @@ -1175,7 +1177,7 @@ #endif // Include a page of printer information in the LCD Main Menu - //#define LCD_INFO_MENU + #define LCD_INFO_MENU #if ENABLED(LCD_INFO_MENU) //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages #endif @@ -1315,9 +1317,9 @@ * an option on the LCD screen to continue the print from the last-known * point in the file. */ - //#define POWER_LOSS_RECOVERY + #define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) - #define PLR_ENABLED_DEFAULT false // Power Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + #define PLR_ENABLED_DEFAULT true // Power Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) //#define BACKUP_POWER_SUPPLY // Backup power / UPS to move the steppers on power loss //#define POWER_LOSS_ZRAISE 2 // (mm) Z axis raise on resume (on power loss with UPS) //#define POWER_LOSS_PIN 44 // Pin to detect power loss. Set to -1 to disable default pin on boards without module. @@ -1512,7 +1514,7 @@ */ #if HAS_MARLINUI_U8GLIB // Show SD percentage next to the progress bar - //#define DOGM_SD_PERCENT + #define DOGM_SD_PERCENT // Save many cycles by drawing a hollow frame or no frame on the Info Screen //#define XYZ_NO_FRAME @@ -1790,7 +1792,7 @@ * * Warning: Does not respect endstops! */ -//#define BABYSTEPPING +#define BABYSTEPPING #if ENABLED(BABYSTEPPING) //#define INTEGRATED_BABYSTEPPING // EXPERIMENTAL integration of babystepping into the Stepper ISR //#define BABYSTEP_WITHOUT_HOMING @@ -1813,7 +1815,8 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 - //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping + #define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping + #if ENABLED(BABYSTEP_ZPROBE_OFFSET) //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor @@ -2311,14 +2314,14 @@ * * Enable PARK_HEAD_ON_PAUSE to add the G-code M125 Pause and Park. */ -//#define ADVANCED_PAUSE_FEATURE +#define ADVANCED_PAUSE_FEATURE #if ENABLED(ADVANCED_PAUSE_FEATURE) #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. // This short retract is done immediately, before parking the nozzle. #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast. #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload. + #define FILAMENT_CHANGE_UNLOAD_LENGTH 450 // (mm) The length of filament for a complete unload. // For Bowden, the full length of the tube and nozzle. // For direct drive, the full length of the nozzle. // Set to 0 for manual unloading. @@ -2327,7 +2330,7 @@ // 0 to disable start loading and skip to fast load only #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast. #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle. + #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 450 // (mm) Load length of filament, from extruder gear to nozzle. // For Bowden, the full length of the tube and nozzle. // For direct drive, the full length of the nozzle. //#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted. @@ -2349,10 +2352,10 @@ #define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed. #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change. - //#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. + #define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. //#define HOME_BEFORE_FILAMENT_CHANGE // If needed, home before parking for filament change - //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. + #define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) #endif @@ -2719,7 +2722,7 @@ * Define your own with: * { , , hysteresis_start[1..8] } */ - #define CHOPPER_TIMING CHOPPER_DEFAULT_12V // All axes (override below) + #define CHOPPER_TIMING CHOPPER_DEFAULT_24V // All axes (override below) //#define CHOPPER_TIMING_X CHOPPER_TIMING // For X Axes (override below) //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X //#define CHOPPER_TIMING_Y CHOPPER_TIMING // For Y Axes (override below) diff --git a/config/examples/Two Trees/BlueR/BlueR V1/Configuration.h b/config/examples/Two Trees/BlueR/BlueR V1/Configuration.h index 78c2dc9160..04bb60644f 100644 --- a/config/examples/Two Trees/BlueR/BlueR V1/Configuration.h +++ b/config/examples/Two Trees/BlueR/BlueR V1/Configuration.h @@ -21,6 +21,11 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Two Trees/BlueR/BlueR V1" + +//#define BLUER_TMC2209 // Enable for the TMC2209 driver version +//#define BLUER_BLTOUCH // Enable if you want to use BLTOUCH + /** * Configuration.h * @@ -69,7 +74,7 @@ // @section info // Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes. +#define STRING_CONFIG_H_AUTHOR "(ils15, BlueR)" // Who made the changes. //#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) /** @@ -102,14 +107,14 @@ * * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] */ -#define SERIAL_PORT 0 +#define SERIAL_PORT 3 /** * Select a secondary serial port on the board to use for communication with the host. * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] */ -//#define SERIAL_PORT_2 -1 +#define SERIAL_PORT_2 1 /** * Select a third serial port on the board to use for communication with the host. @@ -134,11 +139,11 @@ // Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_RAMPS_14_EFB + #define MOTHERBOARD BOARD_MKS_ROBIN_NANO #endif // Name displayed in the LCD "Ready" message and Info menu -//#define CUSTOM_MACHINE_NAME "3D Printer" +#define CUSTOM_MACHINE_NAME "Two Trees BlueR" // Printer's unique ID, used by some programs to differentiate between machines. // Choose your own or use a service like https://www.uuidgenerator.net/version4 @@ -424,7 +429,7 @@ #define TEMP_SENSOR_5 0 #define TEMP_SENSOR_6 0 #define TEMP_SENSOR_7 0 -#define TEMP_SENSOR_BED 0 +#define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 #define TEMP_SENSOR_COOLER 0 @@ -480,7 +485,7 @@ #define HEATER_5_MAXTEMP 275 #define HEATER_6_MAXTEMP 275 #define HEATER_7_MAXTEMP 275 -#define BED_MAXTEMP 150 +#define BED_MAXTEMP 120 #define CHAMBER_MAXTEMP 60 /** @@ -505,21 +510,22 @@ #define PID_K1 0.95 // Smoothing factor within any PID loop #if ENABLED(PIDTEMP) - //#define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) - //#define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) + #define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) + #define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) // Set/get with gcode: M301 E[extruder number, 0-2] #if ENABLED(PID_PARAMS_PER_HOTEND) // Specify between 1 and HOTENDS values per array. // If fewer than EXTRUDER values are provided, the last element will be repeated. - #define DEFAULT_Kp_LIST { 22.20, 22.20 } - #define DEFAULT_Ki_LIST { 1.08, 1.08 } - #define DEFAULT_Kd_LIST { 114.00, 114.00 } + #define DEFAULT_Kp_LIST { 11.03, 11.03 } + #define DEFAULT_Ki_LIST { 0.63, 0.63 } + #define DEFAULT_Kd_LIST { 48.43, 48.43 } #else - #define DEFAULT_Kp 22.20 - #define DEFAULT_Ki 1.08 - #define DEFAULT_Kd 114.00 + // Bluer + #define DEFAULT_Kp 15.72 + #define DEFAULT_Ki 1.24 + #define DEFAULT_Kd 49.77 #endif #endif // PIDTEMP @@ -540,7 +546,7 @@ * heater. If your configuration is significantly different than this and you don't understand * the issues involved, don't use bed PID until someone else verifies that your hardware works. */ -//#define PIDTEMPBED +#define PIDTEMPBED //#define BED_LIMIT_SWITCHING @@ -558,9 +564,10 @@ // 120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) // from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) - #define DEFAULT_bedKp 10.00 - #define DEFAULT_bedKi .023 - #define DEFAULT_bedKd 305.4 + //BlueR PID Settings + #define DEFAULT_bedKp 66.39 + #define DEFAULT_bedKi 12.94 + #define DEFAULT_bedKd 227.14 // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. #endif // PIDTEMPBED @@ -634,7 +641,7 @@ * Note: For Bowden Extruders make this large enough to allow load/unload. */ #define PREVENT_LENGTHY_EXTRUDE -#define EXTRUDE_MAXLENGTH 200 +#define EXTRUDE_MAXLENGTH 500 //=========================================================================== //======================== Thermal Runaway Protection ======================= @@ -717,13 +724,13 @@ #endif // Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define X_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_PROBE_ENDSTOP_INVERTING false // Set to true to invert the logic of the probe. +#define X_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Y_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Z_MIN_ENDSTOP_INVERTING true// Set to true to invert the logic of the endstop. +#define X_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Y_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Z_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Z_MIN_PROBE_ENDSTOP_INVERTING true // Set to true to invert the logic of the probe. /** * Stepper Drivers @@ -743,15 +750,25 @@ * TMC5130, TMC5130_STANDALONE, TMC5160, TMC5160_STANDALONE * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'L6474', 'POWERSTEP01', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2160', 'TMC2160_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC2209', 'TMC2209_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE', 'TMC5160', 'TMC5160_STANDALONE'] */ -#define X_DRIVER_TYPE A4988 -#define Y_DRIVER_TYPE A4988 -#define Z_DRIVER_TYPE A4988 +#if ENABLED(BLUER_TMC2209) + #define X_DRIVER_TYPE TMC2209_STANDALONE + #define Y_DRIVER_TYPE TMC2209_STANDALONE + #define Z_DRIVER_TYPE TMC2209_STANDALONE +#else + #define X_DRIVER_TYPE TMC2208_STANDALONE + #define Y_DRIVER_TYPE TMC2208_STANDALONE + #define Z_DRIVER_TYPE A4988 +#endif //#define X2_DRIVER_TYPE A4988 //#define Y2_DRIVER_TYPE A4988 //#define Z2_DRIVER_TYPE A4988 //#define Z3_DRIVER_TYPE A4988 //#define Z4_DRIVER_TYPE A4988 -#define E0_DRIVER_TYPE A4988 +#if ENABLED(BLUER_TMC2209) + #define E0_DRIVER_TYPE TMC2209_STANDALONE +#else + #define E0_DRIVER_TYPE A4988 +#endif //#define E1_DRIVER_TYPE A4988 //#define E2_DRIVER_TYPE A4988 //#define E3_DRIVER_TYPE A4988 @@ -806,14 +823,14 @@ * Override with M92 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 500 } +#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 93 } /** * Default Max Feed Rate (mm/s) * Override with M203 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 } +#define DEFAULT_MAX_FEEDRATE { 250, 250, 10, 50 } //#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 #if ENABLED(LIMITED_MAX_FR_EDITING) @@ -841,9 +858,9 @@ * M204 R Retract Acceleration * M204 T Travel Acceleration */ -#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves +#define DEFAULT_ACCELERATION 750 // X, Y, Z and E acceleration for printing moves +#define DEFAULT_RETRACT_ACCELERATION 1000 // E acceleration for retracts +#define DEFAULT_TRAVEL_ACCELERATION 1000 // X, Y, Z acceleration for travel (non printing) moves /** * Default Jerk limits (mm/s) @@ -877,7 +894,7 @@ * https://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html */ #if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.013 // (mm) Distance from real junction edge + #define JUNCTION_DEVIATION_MM 0.3 // (mm) Distance from real junction edge #define JD_HANDLE_SMALL_SEGMENTS // Use curvature estimation instead of just the junction angle // for small segments (< 1mm) with large junction angles (> 135°). #endif @@ -890,7 +907,7 @@ * * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained */ -//#define S_CURVE_ACCELERATION +#define S_CURVE_ACCELERATION //=========================================================================== //============================= Z Probe Options ============================= @@ -906,7 +923,9 @@ * The probe replaces the Z-MIN endstop and is used for Z homing. * (Automatically enables USE_PROBE_FOR_Z_HOMING.) */ -#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN +#if ENABLED(BLUER_BLTOUCH) + #define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN +#endif // Force the use of the probe for Z-axis homing //#define USE_PROBE_FOR_Z_HOMING @@ -963,7 +982,9 @@ /** * The BLTouch probe uses a Hall effect sensor and emulates a servo. */ -//#define BLTOUCH +#if ENABLED(BLUER_BLTOUCH) + #define BLTOUCH +#endif /** * Touch-MI Probe by hotends.fr @@ -1191,13 +1212,21 @@ // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR false -#define INVERT_Y_DIR true -#define INVERT_Z_DIR false +#define INVERT_Y_DIR false +#if ENABLED(BLUER_TMC2209) + #define INVERT_Z_DIR false +#else + #define INVERT_Z_DIR true +#endif // @section extruder // For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR false +#if ENABLED(BLUER_TMC2209) + #define INVERT_E0_DIR false +#else + #define INVERT_E0_DIR true +#endif #define INVERT_E1_DIR false #define INVERT_E2_DIR false #define INVERT_E3_DIR false @@ -1218,30 +1247,30 @@ */ //#define Z_IDLE_HEIGHT Z_HOME_POS -//#define Z_HOMING_HEIGHT 4 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ... +#define Z_HOMING_HEIGHT 10 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ... // Be sure to have this much clearance over your Z_MAX_POS to prevent grinding. //#define Z_AFTER_HOMING 10 // (mm) Height to move to after homing Z // Direction of endstops when homing; 1=MAX, -1=MIN // :[-1,1] -#define X_HOME_DIR -1 -#define Y_HOME_DIR -1 -#define Z_HOME_DIR -1 + #define X_HOME_DIR -1 + #define Y_HOME_DIR -1 + #define Z_HOME_DIR -1 // @section machine // The size of the printable area -#define X_BED_SIZE 200 -#define Y_BED_SIZE 200 +#define X_BED_SIZE 235 +#define Y_BED_SIZE 235 // Travel limits (mm) after homing, corresponding to endstop positions. #define X_MIN_POS 0 -#define Y_MIN_POS 0 +#define Y_MIN_POS -5 #define Z_MIN_POS 0 #define X_MAX_POS X_BED_SIZE #define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 200 +#define Z_MAX_POS 280 /** * Software Endstops @@ -1269,7 +1298,7 @@ #endif #if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS) - //#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD + #define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD #endif /** @@ -1285,7 +1314,7 @@ * RAMPS-based boards use SERVO3_PIN for the first runout sensor. * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. */ -//#define FILAMENT_RUNOUT_SENSOR +#define FILAMENT_RUNOUT_SENSOR #if ENABLED(FILAMENT_RUNOUT_SENSOR) #define FIL_RUNOUT_ENABLED_DEFAULT true // Enable the sensor on startup. Override with M412 followed by M500. #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. @@ -1387,16 +1416,18 @@ */ //#define AUTO_BED_LEVELING_3POINT //#define AUTO_BED_LEVELING_LINEAR -//#define AUTO_BED_LEVELING_BILINEAR //#define AUTO_BED_LEVELING_UBL -//#define MESH_BED_LEVELING - +#if ENABLED(BLUER_BLTOUCH) + #define AUTO_BED_LEVELING_BILINEAR +#else + #define MESH_BED_LEVELING +#endif /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable * leveling immediately after G28. */ -//#define RESTORE_LEVELING_AFTER_G28 +#define RESTORE_LEVELING_AFTER_G28 //#define ENABLE_LEVELING_AFTER_G28 /** @@ -1506,7 +1537,7 @@ //=================================== Mesh ================================== //=========================================================================== - #define MESH_INSET 10 // Set Mesh bounds as an inset region of the bed + #define MESH_INSET 15 // Set Mesh bounds as an inset region of the bed #define GRID_MAX_POINTS_X 3 // Don't use more than 7 points per axis, implementation limited. #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X @@ -1518,22 +1549,22 @@ * Add a bed leveling sub-menu for ABL or MBL. * Include a guided procedure if manual probing is enabled. */ -//#define LCD_BED_LEVELING +#define LCD_BED_LEVELING #if ENABLED(LCD_BED_LEVELING) #define MESH_EDIT_Z_STEP 0.025 // (mm) Step size while manually probing Z axis. #define LCD_PROBE_Z_RANGE 4 // (mm) Z Range centered on Z_MIN_POS for LCD Z adjustment - //#define MESH_EDIT_MENU // Add a menu to edit mesh points + #define MESH_EDIT_MENU // Add a menu to edit mesh points #endif // Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS +#define LEVEL_BED_CORNERS #if ENABLED(LEVEL_BED_CORNERS) #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner + #define LEVEL_CORNERS_Z_HOP 10 // (mm) Z height of nozzle between leveling points + #define LEVEL_CENTER_TOO // Move to the center after the last corner //#define LEVEL_CORNERS_USE_PROBE #if ENABLED(LEVEL_CORNERS_USE_PROBE) #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 @@ -1587,7 +1618,9 @@ // - Move the Z probe (or nozzle) to a defined XY point before Z Homing. // - Prevent Z homing when the Z probe is outside bed area. // -//#define Z_SAFE_HOMING +#if ENABLED(BLUER_BLTOUCH) + #define Z_SAFE_HOMING +#endif #if ENABLED(Z_SAFE_HOMING) #define Z_SAFE_HOMING_X_POINT X_CENTER // X point for Z homing @@ -1672,7 +1705,7 @@ * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) */ -//#define EEPROM_SETTINGS // Persistent storage with M500 and M501 +#define EEPROM_SETTINGS // Persistent storage with M500 and M501 //#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. #define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load @@ -1728,7 +1761,7 @@ * P1 Raise the nozzle always to Z-park height. * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. */ -//#define NOZZLE_PARK_FEATURE +#define NOZZLE_PARK_FEATURE #if ENABLED(NOZZLE_PARK_FEATURE) // Specify a park position as { X, Y, Z_raise } @@ -1845,7 +1878,7 @@ * * View the current statistics with M78. */ -//#define PRINTCOUNTER +#define PRINTCOUNTER #if ENABLED(PRINTCOUNTER) #define PRINTCOUNTER_SAVE_INTERVAL 60 // (minutes) EEPROM save interval during print #endif @@ -1936,7 +1969,7 @@ * SD Card support is disabled by default. If your controller has an SD slot, * you must uncomment the following option or it won't work. */ -//#define SDSUPPORT +#define SDSUPPORT /** * SD CARD: ENABLE CRC @@ -2006,7 +2039,7 @@ // // Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. // -//#define INDIVIDUAL_AXIS_HOMING_MENU +#define INDIVIDUAL_AXIS_HOMING_MENU // // SPEAKER/BUZZER @@ -2472,7 +2505,7 @@ // 480x320, 3.5", FSMC Display From MKS // Normally used in MKS Robin Nano V1.2 // -//#define MKS_ROBIN_TFT35 +#define MKS_ROBIN_TFT35 // // 480x272, 4.3", FSMC Display From MKS @@ -2524,13 +2557,13 @@ #define TFT_DRIVER AUTO // Interface. Enable one of the following options: - //#define TFT_INTERFACE_FSMC + #define TFT_INTERFACE_FSMC //#define TFT_INTERFACE_SPI // TFT Resolution. Enable one of the following options: //#define TFT_RES_320x240 //#define TFT_RES_480x272 - //#define TFT_RES_480x320 + #define TFT_RES_480x320 #endif /** @@ -2544,7 +2577,7 @@ * root of your SD card, together with the compiled firmware. */ //#define TFT_CLASSIC_UI -//#define TFT_COLOR_UI +#define TFT_COLOR_UI //#define TFT_LVGL_UI #if ENABLED(TFT_LVGL_UI) @@ -2573,17 +2606,17 @@ // // Touch Screen Settings // -//#define TOUCH_SCREEN +#define TOUCH_SCREEN #if ENABLED(TOUCH_SCREEN) #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus #define TOUCH_SCREEN_CALIBRATION - //#define TOUCH_CALIBRATION_X 12316 - //#define TOUCH_CALIBRATION_Y -8981 - //#define TOUCH_OFFSET_X -43 - //#define TOUCH_OFFSET_Y 257 + #define TOUCH_CALIBRATION_X 17880 + #define TOUCH_CALIBRATION_Y -12234 + #define TOUCH_OFFSET_X -45 + #define TOUCH_OFFSET_Y 349 //#define TOUCH_ORIENTATION TOUCH_LANDSCAPE #if BOTH(TOUCH_SCREEN_CALIBRATION, EEPROM_SETTINGS) diff --git a/config/examples/Two Trees/BlueR/BlueR V1/Configuration_adv.h b/config/examples/Two Trees/BlueR/BlueR V1/Configuration_adv.h index 5335fa012a..5526d2130b 100644 --- a/config/examples/Two Trees/BlueR/BlueR V1/Configuration_adv.h +++ b/config/examples/Two Trees/BlueR/BlueR V1/Configuration_adv.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Two Trees/BlueR/BlueR V1" + /** * Configuration_adv.h * @@ -266,8 +268,8 @@ * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 40 // Seconds + #define THERMAL_PROTECTION_BED_HYSTERESIS 5 // Degrees Celsius /** * As described above, except for the bed (M140/M190/M303). @@ -437,9 +439,9 @@ * Hotend Idle Timeout * Prevent filament in the nozzle from charring and causing a critical jam. */ -//#define HOTEND_IDLE_TIMEOUT +#define HOTEND_IDLE_TIMEOUT #if ENABLED(HOTEND_IDLE_TIMEOUT) - #define HOTEND_IDLE_TIMEOUT_SEC (5*60) // (seconds) Time without extruder movement to trigger protection + #define HOTEND_IDLE_TIMEOUT_SEC (15*60) // (seconds) Time without extruder movement to trigger protection #define HOTEND_IDLE_MIN_TRIGGER 180 // (°C) Minimum temperature to enable hotend protection #define HOTEND_IDLE_NOZZLE_TARGET 0 // (°C) Safe temperature for the nozzle after timeout #define HOTEND_IDLE_BED_TARGET 0 // (°C) Safe temperature for the bed after timeout @@ -540,7 +542,7 @@ * Multiple extruders can be assigned to the same pin in which case * the fan will turn on when any selected extruder is above the threshold. */ -#define E0_AUTO_FAN_PIN -1 +#define E0_AUTO_FAN_PIN FAN1_PIN #define E1_AUTO_FAN_PIN -1 #define E2_AUTO_FAN_PIN -1 #define E3_AUTO_FAN_PIN -1 @@ -741,7 +743,7 @@ //#define HOMING_BACKOFF_POST_MM { 2, 2, 2 } // (mm) Backoff from endstops after homing -//#define QUICK_HOME // If G28 contains XY do a diagonal move first +#define QUICK_HOME // If G28 contains XY do a diagonal move first //#define HOME_Y_BEFORE_X // If G28 contains XY home Y before X //#define HOME_Z_FIRST // Home Z first. Requires a Z-MIN endstop (not a probe). //#define CODEPENDENT_XY_HOMING // If X/Y can't home without homing Y/X first @@ -1175,7 +1177,7 @@ #endif // Include a page of printer information in the LCD Main Menu - //#define LCD_INFO_MENU + #define LCD_INFO_MENU #if ENABLED(LCD_INFO_MENU) //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages #endif @@ -1315,7 +1317,7 @@ * an option on the LCD screen to continue the print from the last-known * point in the file. */ - //#define POWER_LOSS_RECOVERY + #define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) //#define BACKUP_POWER_SUPPLY // Backup power / UPS to move the steppers on power loss @@ -1512,7 +1514,7 @@ */ #if HAS_MARLINUI_U8GLIB // Show SD percentage next to the progress bar - //#define DOGM_SD_PERCENT + #define DOGM_SD_PERCENT // Save many cycles by drawing a hollow frame or no frame on the Info Screen //#define XYZ_NO_FRAME @@ -1790,7 +1792,7 @@ * * Warning: Does not respect endstops! */ -//#define BABYSTEPPING +#define BABYSTEPPING #if ENABLED(BABYSTEPPING) //#define INTEGRATED_BABYSTEPPING // EXPERIMENTAL integration of babystepping into the Stepper ISR //#define BABYSTEP_WITHOUT_HOMING @@ -1813,7 +1815,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 - //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping + #if ENABLED(BLUER_BLTOUCH) + #define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping + #endif #if ENABLED(BABYSTEP_ZPROBE_OFFSET) //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor @@ -2311,14 +2315,14 @@ * * Enable PARK_HEAD_ON_PAUSE to add the G-code M125 Pause and Park. */ -//#define ADVANCED_PAUSE_FEATURE +#define ADVANCED_PAUSE_FEATURE #if ENABLED(ADVANCED_PAUSE_FEATURE) #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. // This short retract is done immediately, before parking the nozzle. #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast. #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload. + #define FILAMENT_CHANGE_UNLOAD_LENGTH 450 // (mm) The length of filament for a complete unload. // For Bowden, the full length of the tube and nozzle. // For direct drive, the full length of the nozzle. // Set to 0 for manual unloading. @@ -2327,7 +2331,7 @@ // 0 to disable start loading and skip to fast load only #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast. #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle. + #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 450 // (mm) Load length of filament, from extruder gear to nozzle. // For Bowden, the full length of the tube and nozzle. // For direct drive, the full length of the nozzle. //#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted. @@ -2349,10 +2353,10 @@ #define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed. #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change. - //#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. + #define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. //#define HOME_BEFORE_FILAMENT_CHANGE // If needed, home before parking for filament change - //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. + #define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) #endif @@ -2719,7 +2723,7 @@ * Define your own with: * { , , hysteresis_start[1..8] } */ - #define CHOPPER_TIMING CHOPPER_DEFAULT_12V // All axes (override below) + #define CHOPPER_TIMING CHOPPER_DEFAULT_24V // All axes (override below) //#define CHOPPER_TIMING_X CHOPPER_TIMING // For X Axes (override below) //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X //#define CHOPPER_TIMING_Y CHOPPER_TIMING // For Y Axes (override below) diff --git a/config/examples/Two Trees/BlueR/BlueR V2/Configuration.h b/config/examples/Two Trees/BlueR/BlueR V2/Configuration.h index 78c2dc9160..e9a90e38b0 100644 --- a/config/examples/Two Trees/BlueR/BlueR V2/Configuration.h +++ b/config/examples/Two Trees/BlueR/BlueR V2/Configuration.h @@ -21,6 +21,12 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Two Trees/BlueR/BlueR V2" + +//#define BLUER_TMC2209 // Enable for the TMC2209 driver version +//#define BLUER_INVERTED_E // Enable if the extruder runs the wrong way +//#define BLUER_BLTOUCH // Enable if you want to use BLTOUCH + /** * Configuration.h * @@ -69,7 +75,7 @@ // @section info // Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes. +#define STRING_CONFIG_H_AUTHOR "(ils15, BlueR)" // Who made the changes. //#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) /** @@ -102,14 +108,14 @@ * * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] */ -#define SERIAL_PORT 0 +#define SERIAL_PORT 3 /** * Select a secondary serial port on the board to use for communication with the host. * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] */ -//#define SERIAL_PORT_2 -1 +#define SERIAL_PORT_2 1 /** * Select a third serial port on the board to use for communication with the host. @@ -134,11 +140,11 @@ // Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_RAMPS_14_EFB + #define MOTHERBOARD BOARD_MKS_ROBIN_NANO #endif // Name displayed in the LCD "Ready" message and Info menu -//#define CUSTOM_MACHINE_NAME "3D Printer" +#define CUSTOM_MACHINE_NAME "Two Trees BlueR" // Printer's unique ID, used by some programs to differentiate between machines. // Choose your own or use a service like https://www.uuidgenerator.net/version4 @@ -424,7 +430,7 @@ #define TEMP_SENSOR_5 0 #define TEMP_SENSOR_6 0 #define TEMP_SENSOR_7 0 -#define TEMP_SENSOR_BED 0 +#define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 #define TEMP_SENSOR_COOLER 0 @@ -480,7 +486,7 @@ #define HEATER_5_MAXTEMP 275 #define HEATER_6_MAXTEMP 275 #define HEATER_7_MAXTEMP 275 -#define BED_MAXTEMP 150 +#define BED_MAXTEMP 120 #define CHAMBER_MAXTEMP 60 /** @@ -505,21 +511,22 @@ #define PID_K1 0.95 // Smoothing factor within any PID loop #if ENABLED(PIDTEMP) - //#define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) - //#define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) + #define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) + #define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) // Set/get with gcode: M301 E[extruder number, 0-2] #if ENABLED(PID_PARAMS_PER_HOTEND) // Specify between 1 and HOTENDS values per array. // If fewer than EXTRUDER values are provided, the last element will be repeated. - #define DEFAULT_Kp_LIST { 22.20, 22.20 } - #define DEFAULT_Ki_LIST { 1.08, 1.08 } - #define DEFAULT_Kd_LIST { 114.00, 114.00 } + #define DEFAULT_Kp_LIST { 11.03, 11.03 } + #define DEFAULT_Ki_LIST { 0.63, 0.63 } + #define DEFAULT_Kd_LIST { 48.43, 48.43 } #else - #define DEFAULT_Kp 22.20 - #define DEFAULT_Ki 1.08 - #define DEFAULT_Kd 114.00 + // Bluer + #define DEFAULT_Kp 15.72 + #define DEFAULT_Ki 1.24 + #define DEFAULT_Kd 49.77 #endif #endif // PIDTEMP @@ -540,7 +547,7 @@ * heater. If your configuration is significantly different than this and you don't understand * the issues involved, don't use bed PID until someone else verifies that your hardware works. */ -//#define PIDTEMPBED +#define PIDTEMPBED //#define BED_LIMIT_SWITCHING @@ -558,9 +565,10 @@ // 120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) // from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) - #define DEFAULT_bedKp 10.00 - #define DEFAULT_bedKi .023 - #define DEFAULT_bedKd 305.4 + //BlueR PID Settings + #define DEFAULT_bedKp 66.39 + #define DEFAULT_bedKi 12.94 + #define DEFAULT_bedKd 227.14 // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. #endif // PIDTEMPBED @@ -634,7 +642,7 @@ * Note: For Bowden Extruders make this large enough to allow load/unload. */ #define PREVENT_LENGTHY_EXTRUDE -#define EXTRUDE_MAXLENGTH 200 +#define EXTRUDE_MAXLENGTH 500 //=========================================================================== //======================== Thermal Runaway Protection ======================= @@ -717,13 +725,13 @@ #endif // Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define X_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_PROBE_ENDSTOP_INVERTING false // Set to true to invert the logic of the probe. +#define X_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Y_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Z_MIN_ENDSTOP_INVERTING true// Set to true to invert the logic of the endstop. +#define X_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Y_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Z_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Z_MIN_PROBE_ENDSTOP_INVERTING true // Set to true to invert the logic of the probe. /** * Stepper Drivers @@ -743,15 +751,25 @@ * TMC5130, TMC5130_STANDALONE, TMC5160, TMC5160_STANDALONE * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'L6474', 'POWERSTEP01', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2160', 'TMC2160_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC2209', 'TMC2209_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE', 'TMC5160', 'TMC5160_STANDALONE'] */ -#define X_DRIVER_TYPE A4988 -#define Y_DRIVER_TYPE A4988 -#define Z_DRIVER_TYPE A4988 +#if ENABLED(BLUER_TMC2209) + #define X_DRIVER_TYPE TMC2209_STANDALONE + #define Y_DRIVER_TYPE TMC2209_STANDALONE + #define Z_DRIVER_TYPE TMC2209_STANDALONE +#else + #define X_DRIVER_TYPE TMC2208_STANDALONE + #define Y_DRIVER_TYPE TMC2208_STANDALONE + #define Z_DRIVER_TYPE A4988 +#endif //#define X2_DRIVER_TYPE A4988 //#define Y2_DRIVER_TYPE A4988 //#define Z2_DRIVER_TYPE A4988 //#define Z3_DRIVER_TYPE A4988 //#define Z4_DRIVER_TYPE A4988 -#define E0_DRIVER_TYPE A4988 +#if ENABLED(BLUER_TMC2209) + #define E0_DRIVER_TYPE TMC2209_STANDALONE +#else + #define E0_DRIVER_TYPE A4988 +#endif //#define E1_DRIVER_TYPE A4988 //#define E2_DRIVER_TYPE A4988 //#define E3_DRIVER_TYPE A4988 @@ -806,14 +824,14 @@ * Override with M92 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 500 } +#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 415 } /** * Default Max Feed Rate (mm/s) * Override with M203 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 } +#define DEFAULT_MAX_FEEDRATE { 250, 250, 10, 50 } //#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 #if ENABLED(LIMITED_MAX_FR_EDITING) @@ -841,9 +859,9 @@ * M204 R Retract Acceleration * M204 T Travel Acceleration */ -#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves +#define DEFAULT_ACCELERATION 750 // X, Y, Z and E acceleration for printing moves +#define DEFAULT_RETRACT_ACCELERATION 1000 // E acceleration for retracts +#define DEFAULT_TRAVEL_ACCELERATION 1000 // X, Y, Z acceleration for travel (non printing) moves /** * Default Jerk limits (mm/s) @@ -877,7 +895,7 @@ * https://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html */ #if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.013 // (mm) Distance from real junction edge + #define JUNCTION_DEVIATION_MM 0.3 // (mm) Distance from real junction edge #define JD_HANDLE_SMALL_SEGMENTS // Use curvature estimation instead of just the junction angle // for small segments (< 1mm) with large junction angles (> 135°). #endif @@ -890,7 +908,7 @@ * * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained */ -//#define S_CURVE_ACCELERATION +#define S_CURVE_ACCELERATION //=========================================================================== //============================= Z Probe Options ============================= @@ -906,7 +924,9 @@ * The probe replaces the Z-MIN endstop and is used for Z homing. * (Automatically enables USE_PROBE_FOR_Z_HOMING.) */ -#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN +#if ENABLED(BLUER_BLTOUCH) + #define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN +#endif // Force the use of the probe for Z-axis homing //#define USE_PROBE_FOR_Z_HOMING @@ -963,7 +983,9 @@ /** * The BLTouch probe uses a Hall effect sensor and emulates a servo. */ -//#define BLTOUCH +#if ENABLED(BLUER_BLTOUCH) + #define BLTOUCH +#endif /** * Touch-MI Probe by hotends.fr @@ -1191,13 +1213,25 @@ // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR false -#define INVERT_Y_DIR true -#define INVERT_Z_DIR false +#define INVERT_Y_DIR false +#if ENABLED(BLUER_TMC2209) + #define INVERT_Z_DIR false +#else + #define INVERT_Z_DIR true +#endif // @section extruder // For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR false +#ifdef BLUER_INVERTED_E + #if ENABLED(BLUER_TMC2209) + #define INVERT_E0_DIR false + #else + #define INVERT_E0_DIR true + #endif +#else + #define INVERT_E0_DIR true +#endif #define INVERT_E1_DIR false #define INVERT_E2_DIR false #define INVERT_E3_DIR false @@ -1218,30 +1252,30 @@ */ //#define Z_IDLE_HEIGHT Z_HOME_POS -//#define Z_HOMING_HEIGHT 4 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ... +#define Z_HOMING_HEIGHT 10 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ... // Be sure to have this much clearance over your Z_MAX_POS to prevent grinding. //#define Z_AFTER_HOMING 10 // (mm) Height to move to after homing Z // Direction of endstops when homing; 1=MAX, -1=MIN // :[-1,1] -#define X_HOME_DIR -1 -#define Y_HOME_DIR -1 -#define Z_HOME_DIR -1 + #define X_HOME_DIR -1 + #define Y_HOME_DIR -1 + #define Z_HOME_DIR -1 // @section machine // The size of the printable area -#define X_BED_SIZE 200 -#define Y_BED_SIZE 200 +#define X_BED_SIZE 235 +#define Y_BED_SIZE 235 // Travel limits (mm) after homing, corresponding to endstop positions. #define X_MIN_POS 0 -#define Y_MIN_POS 0 +#define Y_MIN_POS -5 #define Z_MIN_POS 0 #define X_MAX_POS X_BED_SIZE #define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 200 +#define Z_MAX_POS 280 /** * Software Endstops @@ -1269,7 +1303,7 @@ #endif #if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS) - //#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD + #define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD #endif /** @@ -1285,7 +1319,7 @@ * RAMPS-based boards use SERVO3_PIN for the first runout sensor. * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. */ -//#define FILAMENT_RUNOUT_SENSOR +#define FILAMENT_RUNOUT_SENSOR #if ENABLED(FILAMENT_RUNOUT_SENSOR) #define FIL_RUNOUT_ENABLED_DEFAULT true // Enable the sensor on startup. Override with M412 followed by M500. #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. @@ -1387,16 +1421,18 @@ */ //#define AUTO_BED_LEVELING_3POINT //#define AUTO_BED_LEVELING_LINEAR -//#define AUTO_BED_LEVELING_BILINEAR //#define AUTO_BED_LEVELING_UBL -//#define MESH_BED_LEVELING - +#if ENABLED(BLUER_BLTOUCH) + #define AUTO_BED_LEVELING_BILINEAR +#else + #define MESH_BED_LEVELING +#endif /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable * leveling immediately after G28. */ -//#define RESTORE_LEVELING_AFTER_G28 +#define RESTORE_LEVELING_AFTER_G28 //#define ENABLE_LEVELING_AFTER_G28 /** @@ -1506,7 +1542,7 @@ //=================================== Mesh ================================== //=========================================================================== - #define MESH_INSET 10 // Set Mesh bounds as an inset region of the bed + #define MESH_INSET 15 // Set Mesh bounds as an inset region of the bed #define GRID_MAX_POINTS_X 3 // Don't use more than 7 points per axis, implementation limited. #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X @@ -1518,22 +1554,22 @@ * Add a bed leveling sub-menu for ABL or MBL. * Include a guided procedure if manual probing is enabled. */ -//#define LCD_BED_LEVELING +#define LCD_BED_LEVELING #if ENABLED(LCD_BED_LEVELING) #define MESH_EDIT_Z_STEP 0.025 // (mm) Step size while manually probing Z axis. #define LCD_PROBE_Z_RANGE 4 // (mm) Z Range centered on Z_MIN_POS for LCD Z adjustment - //#define MESH_EDIT_MENU // Add a menu to edit mesh points + #define MESH_EDIT_MENU // Add a menu to edit mesh points #endif // Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS +#define LEVEL_BED_CORNERS #if ENABLED(LEVEL_BED_CORNERS) #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner + #define LEVEL_CORNERS_Z_HOP 10 // (mm) Z height of nozzle between leveling points + #define LEVEL_CENTER_TOO // Move to the center after the last corner //#define LEVEL_CORNERS_USE_PROBE #if ENABLED(LEVEL_CORNERS_USE_PROBE) #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 @@ -1587,7 +1623,9 @@ // - Move the Z probe (or nozzle) to a defined XY point before Z Homing. // - Prevent Z homing when the Z probe is outside bed area. // -//#define Z_SAFE_HOMING +#if ENABLED(BLUER_BLTOUCH) + #define Z_SAFE_HOMING +#endif #if ENABLED(Z_SAFE_HOMING) #define Z_SAFE_HOMING_X_POINT X_CENTER // X point for Z homing @@ -1672,7 +1710,7 @@ * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) */ -//#define EEPROM_SETTINGS // Persistent storage with M500 and M501 +#define EEPROM_SETTINGS // Persistent storage with M500 and M501 //#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. #define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load @@ -1728,7 +1766,7 @@ * P1 Raise the nozzle always to Z-park height. * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. */ -//#define NOZZLE_PARK_FEATURE +#define NOZZLE_PARK_FEATURE #if ENABLED(NOZZLE_PARK_FEATURE) // Specify a park position as { X, Y, Z_raise } @@ -1845,7 +1883,7 @@ * * View the current statistics with M78. */ -//#define PRINTCOUNTER +#define PRINTCOUNTER #if ENABLED(PRINTCOUNTER) #define PRINTCOUNTER_SAVE_INTERVAL 60 // (minutes) EEPROM save interval during print #endif @@ -1936,7 +1974,7 @@ * SD Card support is disabled by default. If your controller has an SD slot, * you must uncomment the following option or it won't work. */ -//#define SDSUPPORT +#define SDSUPPORT /** * SD CARD: ENABLE CRC @@ -2006,7 +2044,7 @@ // // Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. // -//#define INDIVIDUAL_AXIS_HOMING_MENU +#define INDIVIDUAL_AXIS_HOMING_MENU // // SPEAKER/BUZZER @@ -2472,7 +2510,7 @@ // 480x320, 3.5", FSMC Display From MKS // Normally used in MKS Robin Nano V1.2 // -//#define MKS_ROBIN_TFT35 +#define MKS_ROBIN_TFT35 // // 480x272, 4.3", FSMC Display From MKS @@ -2524,13 +2562,13 @@ #define TFT_DRIVER AUTO // Interface. Enable one of the following options: - //#define TFT_INTERFACE_FSMC + #define TFT_INTERFACE_FSMC //#define TFT_INTERFACE_SPI // TFT Resolution. Enable one of the following options: //#define TFT_RES_320x240 //#define TFT_RES_480x272 - //#define TFT_RES_480x320 + #define TFT_RES_480x320 #endif /** @@ -2544,7 +2582,7 @@ * root of your SD card, together with the compiled firmware. */ //#define TFT_CLASSIC_UI -//#define TFT_COLOR_UI +#define TFT_COLOR_UI //#define TFT_LVGL_UI #if ENABLED(TFT_LVGL_UI) @@ -2573,17 +2611,17 @@ // // Touch Screen Settings // -//#define TOUCH_SCREEN +#define TOUCH_SCREEN #if ENABLED(TOUCH_SCREEN) #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus #define TOUCH_SCREEN_CALIBRATION - //#define TOUCH_CALIBRATION_X 12316 - //#define TOUCH_CALIBRATION_Y -8981 - //#define TOUCH_OFFSET_X -43 - //#define TOUCH_OFFSET_Y 257 + #define TOUCH_CALIBRATION_X 17880 + #define TOUCH_CALIBRATION_Y -12234 + #define TOUCH_OFFSET_X -45 + #define TOUCH_OFFSET_Y 349 //#define TOUCH_ORIENTATION TOUCH_LANDSCAPE #if BOTH(TOUCH_SCREEN_CALIBRATION, EEPROM_SETTINGS) diff --git a/config/examples/Two Trees/BlueR/BlueR V2/Configuration_adv.h b/config/examples/Two Trees/BlueR/BlueR V2/Configuration_adv.h index 5335fa012a..dfc9a015cb 100644 --- a/config/examples/Two Trees/BlueR/BlueR V2/Configuration_adv.h +++ b/config/examples/Two Trees/BlueR/BlueR V2/Configuration_adv.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Two Trees/BlueR/BlueR V2" + /** * Configuration_adv.h * @@ -266,8 +268,8 @@ * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 40 // Seconds + #define THERMAL_PROTECTION_BED_HYSTERESIS 5 // Degrees Celsius /** * As described above, except for the bed (M140/M190/M303). @@ -437,9 +439,9 @@ * Hotend Idle Timeout * Prevent filament in the nozzle from charring and causing a critical jam. */ -//#define HOTEND_IDLE_TIMEOUT +#define HOTEND_IDLE_TIMEOUT #if ENABLED(HOTEND_IDLE_TIMEOUT) - #define HOTEND_IDLE_TIMEOUT_SEC (5*60) // (seconds) Time without extruder movement to trigger protection + #define HOTEND_IDLE_TIMEOUT_SEC (15*60) // (seconds) Time without extruder movement to trigger protection #define HOTEND_IDLE_MIN_TRIGGER 180 // (°C) Minimum temperature to enable hotend protection #define HOTEND_IDLE_NOZZLE_TARGET 0 // (°C) Safe temperature for the nozzle after timeout #define HOTEND_IDLE_BED_TARGET 0 // (°C) Safe temperature for the bed after timeout @@ -540,7 +542,7 @@ * Multiple extruders can be assigned to the same pin in which case * the fan will turn on when any selected extruder is above the threshold. */ -#define E0_AUTO_FAN_PIN -1 +#define E0_AUTO_FAN_PIN FAN1_PIN #define E1_AUTO_FAN_PIN -1 #define E2_AUTO_FAN_PIN -1 #define E3_AUTO_FAN_PIN -1 @@ -741,7 +743,7 @@ //#define HOMING_BACKOFF_POST_MM { 2, 2, 2 } // (mm) Backoff from endstops after homing -//#define QUICK_HOME // If G28 contains XY do a diagonal move first +#define QUICK_HOME // If G28 contains XY do a diagonal move first //#define HOME_Y_BEFORE_X // If G28 contains XY home Y before X //#define HOME_Z_FIRST // Home Z first. Requires a Z-MIN endstop (not a probe). //#define CODEPENDENT_XY_HOMING // If X/Y can't home without homing Y/X first @@ -1175,7 +1177,7 @@ #endif // Include a page of printer information in the LCD Main Menu - //#define LCD_INFO_MENU + #define LCD_INFO_MENU #if ENABLED(LCD_INFO_MENU) //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages #endif @@ -1315,7 +1317,7 @@ * an option on the LCD screen to continue the print from the last-known * point in the file. */ - //#define POWER_LOSS_RECOVERY + #define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) //#define BACKUP_POWER_SUPPLY // Backup power / UPS to move the steppers on power loss @@ -1512,7 +1514,7 @@ */ #if HAS_MARLINUI_U8GLIB // Show SD percentage next to the progress bar - //#define DOGM_SD_PERCENT + #define DOGM_SD_PERCENT // Save many cycles by drawing a hollow frame or no frame on the Info Screen //#define XYZ_NO_FRAME @@ -1790,7 +1792,7 @@ * * Warning: Does not respect endstops! */ -//#define BABYSTEPPING +#define BABYSTEPPING #if ENABLED(BABYSTEPPING) //#define INTEGRATED_BABYSTEPPING // EXPERIMENTAL integration of babystepping into the Stepper ISR //#define BABYSTEP_WITHOUT_HOMING @@ -1813,7 +1815,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 - //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping + #if ENABLED(BLUER_BLTOUCH) + #define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping + #endif #if ENABLED(BABYSTEP_ZPROBE_OFFSET) //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor @@ -2311,14 +2315,14 @@ * * Enable PARK_HEAD_ON_PAUSE to add the G-code M125 Pause and Park. */ -//#define ADVANCED_PAUSE_FEATURE +#define ADVANCED_PAUSE_FEATURE #if ENABLED(ADVANCED_PAUSE_FEATURE) #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. // This short retract is done immediately, before parking the nozzle. #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast. #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload. + #define FILAMENT_CHANGE_UNLOAD_LENGTH 450 // (mm) The length of filament for a complete unload. // For Bowden, the full length of the tube and nozzle. // For direct drive, the full length of the nozzle. // Set to 0 for manual unloading. @@ -2327,7 +2331,7 @@ // 0 to disable start loading and skip to fast load only #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast. #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle. + #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 450 // (mm) Load length of filament, from extruder gear to nozzle. // For Bowden, the full length of the tube and nozzle. // For direct drive, the full length of the nozzle. //#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted. @@ -2349,10 +2353,10 @@ #define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed. #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change. - //#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. + #define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. //#define HOME_BEFORE_FILAMENT_CHANGE // If needed, home before parking for filament change - //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. + #define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) #endif @@ -2719,7 +2723,7 @@ * Define your own with: * { , , hysteresis_start[1..8] } */ - #define CHOPPER_TIMING CHOPPER_DEFAULT_12V // All axes (override below) + #define CHOPPER_TIMING CHOPPER_DEFAULT_24V // All axes (override below) //#define CHOPPER_TIMING_X CHOPPER_TIMING // For X Axes (override below) //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X //#define CHOPPER_TIMING_Y CHOPPER_TIMING // For Y Axes (override below) diff --git a/config/examples/Two Trees/BlueR/BlueR V3/Configuration.h b/config/examples/Two Trees/BlueR/BlueR V3/Configuration.h index 78c2dc9160..a2c6b57794 100644 --- a/config/examples/Two Trees/BlueR/BlueR V3/Configuration.h +++ b/config/examples/Two Trees/BlueR/BlueR V3/Configuration.h @@ -21,6 +21,11 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Two Trees/BlueR/BlueR V3" + +//#define BLUER_TMC2209 // Enable for the TMC2209 driver version +//#define BLUER_BLTOUCH // Enable if you want to use BLTOUCH + /** * Configuration.h * @@ -69,7 +74,7 @@ // @section info // Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes. +#define STRING_CONFIG_H_AUTHOR "(ils15, BlueR)" // Who made the changes. //#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) /** @@ -102,14 +107,14 @@ * * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] */ -#define SERIAL_PORT 0 +#define SERIAL_PORT 3 /** * Select a secondary serial port on the board to use for communication with the host. * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] */ -//#define SERIAL_PORT_2 -1 +#define SERIAL_PORT_2 1 /** * Select a third serial port on the board to use for communication with the host. @@ -134,11 +139,11 @@ // Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_RAMPS_14_EFB + #define MOTHERBOARD BOARD_MKS_ROBIN_NANO #endif // Name displayed in the LCD "Ready" message and Info menu -//#define CUSTOM_MACHINE_NAME "3D Printer" +#define CUSTOM_MACHINE_NAME "Two Trees BlueR" // Printer's unique ID, used by some programs to differentiate between machines. // Choose your own or use a service like https://www.uuidgenerator.net/version4 @@ -424,7 +429,7 @@ #define TEMP_SENSOR_5 0 #define TEMP_SENSOR_6 0 #define TEMP_SENSOR_7 0 -#define TEMP_SENSOR_BED 0 +#define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 #define TEMP_SENSOR_COOLER 0 @@ -480,7 +485,7 @@ #define HEATER_5_MAXTEMP 275 #define HEATER_6_MAXTEMP 275 #define HEATER_7_MAXTEMP 275 -#define BED_MAXTEMP 150 +#define BED_MAXTEMP 120 #define CHAMBER_MAXTEMP 60 /** @@ -505,21 +510,22 @@ #define PID_K1 0.95 // Smoothing factor within any PID loop #if ENABLED(PIDTEMP) - //#define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) - //#define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) + #define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) + #define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) // Set/get with gcode: M301 E[extruder number, 0-2] #if ENABLED(PID_PARAMS_PER_HOTEND) // Specify between 1 and HOTENDS values per array. // If fewer than EXTRUDER values are provided, the last element will be repeated. - #define DEFAULT_Kp_LIST { 22.20, 22.20 } - #define DEFAULT_Ki_LIST { 1.08, 1.08 } - #define DEFAULT_Kd_LIST { 114.00, 114.00 } + #define DEFAULT_Kp_LIST { 11.03, 11.03 } + #define DEFAULT_Ki_LIST { 0.63, 0.63 } + #define DEFAULT_Kd_LIST { 48.43, 48.43 } #else - #define DEFAULT_Kp 22.20 - #define DEFAULT_Ki 1.08 - #define DEFAULT_Kd 114.00 + // Bluer + #define DEFAULT_Kp 15.72 + #define DEFAULT_Ki 1.24 + #define DEFAULT_Kd 49.77 #endif #endif // PIDTEMP @@ -540,7 +546,7 @@ * heater. If your configuration is significantly different than this and you don't understand * the issues involved, don't use bed PID until someone else verifies that your hardware works. */ -//#define PIDTEMPBED +#define PIDTEMPBED //#define BED_LIMIT_SWITCHING @@ -558,9 +564,10 @@ // 120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) // from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) - #define DEFAULT_bedKp 10.00 - #define DEFAULT_bedKi .023 - #define DEFAULT_bedKd 305.4 + //BlueR PID Settings + #define DEFAULT_bedKp 66.39 + #define DEFAULT_bedKi 12.94 + #define DEFAULT_bedKd 227.14 // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. #endif // PIDTEMPBED @@ -634,7 +641,7 @@ * Note: For Bowden Extruders make this large enough to allow load/unload. */ #define PREVENT_LENGTHY_EXTRUDE -#define EXTRUDE_MAXLENGTH 200 +#define EXTRUDE_MAXLENGTH 500 //=========================================================================== //======================== Thermal Runaway Protection ======================= @@ -717,13 +724,13 @@ #endif // Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define X_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_PROBE_ENDSTOP_INVERTING false // Set to true to invert the logic of the probe. +#define X_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Y_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Z_MIN_ENDSTOP_INVERTING true// Set to true to invert the logic of the endstop. +#define X_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Y_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Z_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Z_MIN_PROBE_ENDSTOP_INVERTING true // Set to true to invert the logic of the probe. /** * Stepper Drivers @@ -743,15 +750,25 @@ * TMC5130, TMC5130_STANDALONE, TMC5160, TMC5160_STANDALONE * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'L6474', 'POWERSTEP01', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2160', 'TMC2160_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC2209', 'TMC2209_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE', 'TMC5160', 'TMC5160_STANDALONE'] */ -#define X_DRIVER_TYPE A4988 -#define Y_DRIVER_TYPE A4988 -#define Z_DRIVER_TYPE A4988 +#if ENABLED(BLUER_TMC2209) + #define X_DRIVER_TYPE TMC2209_STANDALONE + #define Y_DRIVER_TYPE TMC2209_STANDALONE + #define Z_DRIVER_TYPE TMC2209_STANDALONE +#else + #define X_DRIVER_TYPE TMC2208_STANDALONE + #define Y_DRIVER_TYPE TMC2208_STANDALONE + #define Z_DRIVER_TYPE A4988 +#endif //#define X2_DRIVER_TYPE A4988 //#define Y2_DRIVER_TYPE A4988 //#define Z2_DRIVER_TYPE A4988 //#define Z3_DRIVER_TYPE A4988 //#define Z4_DRIVER_TYPE A4988 -#define E0_DRIVER_TYPE A4988 +#if ENABLED(BLUER_TMC2209) + #define E0_DRIVER_TYPE TMC2209_STANDALONE +#else + #define E0_DRIVER_TYPE A4988 +#endif //#define E1_DRIVER_TYPE A4988 //#define E2_DRIVER_TYPE A4988 //#define E3_DRIVER_TYPE A4988 @@ -806,14 +823,18 @@ * Override with M92 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 500 } +#if ENABLED(BLUER_TMC2209) + #define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 415 } +#else + #define DEFAULT_AXIS_STEPS_PER_UNIT { 160, 160, 400, 415 } +#endif /** * Default Max Feed Rate (mm/s) * Override with M203 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 } +#define DEFAULT_MAX_FEEDRATE { 250, 250, 10, 50 } //#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 #if ENABLED(LIMITED_MAX_FR_EDITING) @@ -841,9 +862,9 @@ * M204 R Retract Acceleration * M204 T Travel Acceleration */ -#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves +#define DEFAULT_ACCELERATION 750 // X, Y, Z and E acceleration for printing moves +#define DEFAULT_RETRACT_ACCELERATION 1000 // E acceleration for retracts +#define DEFAULT_TRAVEL_ACCELERATION 1000 // X, Y, Z acceleration for travel (non printing) moves /** * Default Jerk limits (mm/s) @@ -877,7 +898,7 @@ * https://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html */ #if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.013 // (mm) Distance from real junction edge + #define JUNCTION_DEVIATION_MM 0.3 // (mm) Distance from real junction edge #define JD_HANDLE_SMALL_SEGMENTS // Use curvature estimation instead of just the junction angle // for small segments (< 1mm) with large junction angles (> 135°). #endif @@ -890,7 +911,7 @@ * * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained */ -//#define S_CURVE_ACCELERATION +#define S_CURVE_ACCELERATION //=========================================================================== //============================= Z Probe Options ============================= @@ -906,7 +927,9 @@ * The probe replaces the Z-MIN endstop and is used for Z homing. * (Automatically enables USE_PROBE_FOR_Z_HOMING.) */ -#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN +#if ENABLED(BLUER_BLTOUCH) + #define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN +#endif // Force the use of the probe for Z-axis homing //#define USE_PROBE_FOR_Z_HOMING @@ -963,7 +986,9 @@ /** * The BLTouch probe uses a Hall effect sensor and emulates a servo. */ -//#define BLTOUCH +#if ENABLED(BLUER_BLTOUCH) + #define BLTOUCH +#endif /** * Touch-MI Probe by hotends.fr @@ -1191,13 +1216,21 @@ // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR false -#define INVERT_Y_DIR true -#define INVERT_Z_DIR false +#define INVERT_Y_DIR false +#if ENABLED(BLUER_TMC2209) + #define INVERT_Z_DIR false +#else + #define INVERT_Z_DIR true +#endif // @section extruder // For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR false +#if ENABLED(BLUER_TMC2209) + #define INVERT_E0_DIR false +#else + #define INVERT_E0_DIR true +#endif #define INVERT_E1_DIR false #define INVERT_E2_DIR false #define INVERT_E3_DIR false @@ -1218,30 +1251,30 @@ */ //#define Z_IDLE_HEIGHT Z_HOME_POS -//#define Z_HOMING_HEIGHT 4 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ... +#define Z_HOMING_HEIGHT 10 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ... // Be sure to have this much clearance over your Z_MAX_POS to prevent grinding. //#define Z_AFTER_HOMING 10 // (mm) Height to move to after homing Z // Direction of endstops when homing; 1=MAX, -1=MIN // :[-1,1] -#define X_HOME_DIR -1 -#define Y_HOME_DIR -1 -#define Z_HOME_DIR -1 + #define X_HOME_DIR -1 + #define Y_HOME_DIR -1 + #define Z_HOME_DIR -1 // @section machine // The size of the printable area -#define X_BED_SIZE 200 -#define Y_BED_SIZE 200 +#define X_BED_SIZE 235 +#define Y_BED_SIZE 235 // Travel limits (mm) after homing, corresponding to endstop positions. #define X_MIN_POS 0 -#define Y_MIN_POS 0 +#define Y_MIN_POS -5 #define Z_MIN_POS 0 #define X_MAX_POS X_BED_SIZE #define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 200 +#define Z_MAX_POS 280 /** * Software Endstops @@ -1269,7 +1302,7 @@ #endif #if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS) - //#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD + #define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD #endif /** @@ -1285,7 +1318,7 @@ * RAMPS-based boards use SERVO3_PIN for the first runout sensor. * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. */ -//#define FILAMENT_RUNOUT_SENSOR +#define FILAMENT_RUNOUT_SENSOR #if ENABLED(FILAMENT_RUNOUT_SENSOR) #define FIL_RUNOUT_ENABLED_DEFAULT true // Enable the sensor on startup. Override with M412 followed by M500. #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. @@ -1387,16 +1420,18 @@ */ //#define AUTO_BED_LEVELING_3POINT //#define AUTO_BED_LEVELING_LINEAR -//#define AUTO_BED_LEVELING_BILINEAR //#define AUTO_BED_LEVELING_UBL -//#define MESH_BED_LEVELING - +#if ENABLED(BLUER_BLTOUCH) + #define AUTO_BED_LEVELING_BILINEAR +#else + #define MESH_BED_LEVELING +#endif /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable * leveling immediately after G28. */ -//#define RESTORE_LEVELING_AFTER_G28 +#define RESTORE_LEVELING_AFTER_G28 //#define ENABLE_LEVELING_AFTER_G28 /** @@ -1506,7 +1541,7 @@ //=================================== Mesh ================================== //=========================================================================== - #define MESH_INSET 10 // Set Mesh bounds as an inset region of the bed + #define MESH_INSET 15 // Set Mesh bounds as an inset region of the bed #define GRID_MAX_POINTS_X 3 // Don't use more than 7 points per axis, implementation limited. #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X @@ -1518,22 +1553,22 @@ * Add a bed leveling sub-menu for ABL or MBL. * Include a guided procedure if manual probing is enabled. */ -//#define LCD_BED_LEVELING +#define LCD_BED_LEVELING #if ENABLED(LCD_BED_LEVELING) #define MESH_EDIT_Z_STEP 0.025 // (mm) Step size while manually probing Z axis. #define LCD_PROBE_Z_RANGE 4 // (mm) Z Range centered on Z_MIN_POS for LCD Z adjustment - //#define MESH_EDIT_MENU // Add a menu to edit mesh points + #define MESH_EDIT_MENU // Add a menu to edit mesh points #endif // Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS +#define LEVEL_BED_CORNERS #if ENABLED(LEVEL_BED_CORNERS) #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner + #define LEVEL_CORNERS_Z_HOP 10 // (mm) Z height of nozzle between leveling points + #define LEVEL_CENTER_TOO // Move to the center after the last corner //#define LEVEL_CORNERS_USE_PROBE #if ENABLED(LEVEL_CORNERS_USE_PROBE) #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 @@ -1587,7 +1622,9 @@ // - Move the Z probe (or nozzle) to a defined XY point before Z Homing. // - Prevent Z homing when the Z probe is outside bed area. // -//#define Z_SAFE_HOMING +#if ENABLED(BLUER_BLTOUCH) + #define Z_SAFE_HOMING +#endif #if ENABLED(Z_SAFE_HOMING) #define Z_SAFE_HOMING_X_POINT X_CENTER // X point for Z homing @@ -1672,7 +1709,7 @@ * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) */ -//#define EEPROM_SETTINGS // Persistent storage with M500 and M501 +#define EEPROM_SETTINGS // Persistent storage with M500 and M501 //#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. #define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load @@ -1728,7 +1765,7 @@ * P1 Raise the nozzle always to Z-park height. * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. */ -//#define NOZZLE_PARK_FEATURE +#define NOZZLE_PARK_FEATURE #if ENABLED(NOZZLE_PARK_FEATURE) // Specify a park position as { X, Y, Z_raise } @@ -1845,7 +1882,7 @@ * * View the current statistics with M78. */ -//#define PRINTCOUNTER +#define PRINTCOUNTER #if ENABLED(PRINTCOUNTER) #define PRINTCOUNTER_SAVE_INTERVAL 60 // (minutes) EEPROM save interval during print #endif @@ -1936,7 +1973,7 @@ * SD Card support is disabled by default. If your controller has an SD slot, * you must uncomment the following option or it won't work. */ -//#define SDSUPPORT +#define SDSUPPORT /** * SD CARD: ENABLE CRC @@ -2006,7 +2043,7 @@ // // Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. // -//#define INDIVIDUAL_AXIS_HOMING_MENU +#define INDIVIDUAL_AXIS_HOMING_MENU // // SPEAKER/BUZZER @@ -2472,7 +2509,7 @@ // 480x320, 3.5", FSMC Display From MKS // Normally used in MKS Robin Nano V1.2 // -//#define MKS_ROBIN_TFT35 +#define MKS_ROBIN_TFT35 // // 480x272, 4.3", FSMC Display From MKS @@ -2524,13 +2561,13 @@ #define TFT_DRIVER AUTO // Interface. Enable one of the following options: - //#define TFT_INTERFACE_FSMC + #define TFT_INTERFACE_FSMC //#define TFT_INTERFACE_SPI // TFT Resolution. Enable one of the following options: //#define TFT_RES_320x240 //#define TFT_RES_480x272 - //#define TFT_RES_480x320 + #define TFT_RES_480x320 #endif /** @@ -2544,7 +2581,7 @@ * root of your SD card, together with the compiled firmware. */ //#define TFT_CLASSIC_UI -//#define TFT_COLOR_UI +#define TFT_COLOR_UI //#define TFT_LVGL_UI #if ENABLED(TFT_LVGL_UI) @@ -2573,17 +2610,17 @@ // // Touch Screen Settings // -//#define TOUCH_SCREEN +#define TOUCH_SCREEN #if ENABLED(TOUCH_SCREEN) #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus #define TOUCH_SCREEN_CALIBRATION - //#define TOUCH_CALIBRATION_X 12316 - //#define TOUCH_CALIBRATION_Y -8981 - //#define TOUCH_OFFSET_X -43 - //#define TOUCH_OFFSET_Y 257 + #define TOUCH_CALIBRATION_X 17880 + #define TOUCH_CALIBRATION_Y -12234 + #define TOUCH_OFFSET_X -45 + #define TOUCH_OFFSET_Y 349 //#define TOUCH_ORIENTATION TOUCH_LANDSCAPE #if BOTH(TOUCH_SCREEN_CALIBRATION, EEPROM_SETTINGS) diff --git a/config/examples/Two Trees/BlueR/BlueR V3/Configuration_adv.h b/config/examples/Two Trees/BlueR/BlueR V3/Configuration_adv.h index 5335fa012a..97f008b45c 100644 --- a/config/examples/Two Trees/BlueR/BlueR V3/Configuration_adv.h +++ b/config/examples/Two Trees/BlueR/BlueR V3/Configuration_adv.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Two Trees/BlueR/BlueR V3" + /** * Configuration_adv.h * @@ -266,8 +268,8 @@ * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 40 // Seconds + #define THERMAL_PROTECTION_BED_HYSTERESIS 5 // Degrees Celsius /** * As described above, except for the bed (M140/M190/M303). @@ -437,9 +439,9 @@ * Hotend Idle Timeout * Prevent filament in the nozzle from charring and causing a critical jam. */ -//#define HOTEND_IDLE_TIMEOUT +#define HOTEND_IDLE_TIMEOUT #if ENABLED(HOTEND_IDLE_TIMEOUT) - #define HOTEND_IDLE_TIMEOUT_SEC (5*60) // (seconds) Time without extruder movement to trigger protection + #define HOTEND_IDLE_TIMEOUT_SEC (15*60) // (seconds) Time without extruder movement to trigger protection #define HOTEND_IDLE_MIN_TRIGGER 180 // (°C) Minimum temperature to enable hotend protection #define HOTEND_IDLE_NOZZLE_TARGET 0 // (°C) Safe temperature for the nozzle after timeout #define HOTEND_IDLE_BED_TARGET 0 // (°C) Safe temperature for the bed after timeout @@ -540,7 +542,7 @@ * Multiple extruders can be assigned to the same pin in which case * the fan will turn on when any selected extruder is above the threshold. */ -#define E0_AUTO_FAN_PIN -1 +#define E0_AUTO_FAN_PIN FAN1_PIN #define E1_AUTO_FAN_PIN -1 #define E2_AUTO_FAN_PIN -1 #define E3_AUTO_FAN_PIN -1 @@ -741,7 +743,7 @@ //#define HOMING_BACKOFF_POST_MM { 2, 2, 2 } // (mm) Backoff from endstops after homing -//#define QUICK_HOME // If G28 contains XY do a diagonal move first +#define QUICK_HOME // If G28 contains XY do a diagonal move first //#define HOME_Y_BEFORE_X // If G28 contains XY home Y before X //#define HOME_Z_FIRST // Home Z first. Requires a Z-MIN endstop (not a probe). //#define CODEPENDENT_XY_HOMING // If X/Y can't home without homing Y/X first @@ -1175,7 +1177,7 @@ #endif // Include a page of printer information in the LCD Main Menu - //#define LCD_INFO_MENU + #define LCD_INFO_MENU #if ENABLED(LCD_INFO_MENU) //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages #endif @@ -1315,7 +1317,7 @@ * an option on the LCD screen to continue the print from the last-known * point in the file. */ - //#define POWER_LOSS_RECOVERY + #define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) //#define BACKUP_POWER_SUPPLY // Backup power / UPS to move the steppers on power loss @@ -1512,7 +1514,7 @@ */ #if HAS_MARLINUI_U8GLIB // Show SD percentage next to the progress bar - //#define DOGM_SD_PERCENT + #define DOGM_SD_PERCENT // Save many cycles by drawing a hollow frame or no frame on the Info Screen //#define XYZ_NO_FRAME @@ -1790,7 +1792,7 @@ * * Warning: Does not respect endstops! */ -//#define BABYSTEPPING +#define BABYSTEPPING #if ENABLED(BABYSTEPPING) //#define INTEGRATED_BABYSTEPPING // EXPERIMENTAL integration of babystepping into the Stepper ISR //#define BABYSTEP_WITHOUT_HOMING @@ -1813,7 +1815,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 - //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping + #if ENABLED(BLUER_BLTOUCH) + #define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping + #endif #if ENABLED(BABYSTEP_ZPROBE_OFFSET) //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor @@ -2311,14 +2315,14 @@ * * Enable PARK_HEAD_ON_PAUSE to add the G-code M125 Pause and Park. */ -//#define ADVANCED_PAUSE_FEATURE +#define ADVANCED_PAUSE_FEATURE #if ENABLED(ADVANCED_PAUSE_FEATURE) #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. // This short retract is done immediately, before parking the nozzle. #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast. #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload. + #define FILAMENT_CHANGE_UNLOAD_LENGTH 450 // (mm) The length of filament for a complete unload. // For Bowden, the full length of the tube and nozzle. // For direct drive, the full length of the nozzle. // Set to 0 for manual unloading. @@ -2327,7 +2331,7 @@ // 0 to disable start loading and skip to fast load only #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast. #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle. + #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 450 // (mm) Load length of filament, from extruder gear to nozzle. // For Bowden, the full length of the tube and nozzle. // For direct drive, the full length of the nozzle. //#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted. @@ -2349,10 +2353,10 @@ #define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed. #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change. - //#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. + #define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. //#define HOME_BEFORE_FILAMENT_CHANGE // If needed, home before parking for filament change - //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. + #define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) #endif @@ -2719,7 +2723,7 @@ * Define your own with: * { , , hysteresis_start[1..8] } */ - #define CHOPPER_TIMING CHOPPER_DEFAULT_12V // All axes (override below) + #define CHOPPER_TIMING CHOPPER_DEFAULT_24V // All axes (override below) //#define CHOPPER_TIMING_X CHOPPER_TIMING // For X Axes (override below) //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X //#define CHOPPER_TIMING_Y CHOPPER_TIMING // For Y Axes (override below) diff --git a/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2/Configuration.h b/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2/Configuration.h index 78c2dc9160..f0fa31dc0b 100644 --- a/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2/Configuration.h +++ b/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2/Configuration.h @@ -21,6 +21,12 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Two Trees/Sapphire Plus/Sapphire Plus V2" + +//#define SAPPHIRE_PLUS_MKS_UI +//#define SAPPHIRE_PLUS_BLTOUCH +//#define SAPPHIRE_PLUS_TMC_UART + /** * Configuration.h * @@ -69,7 +75,7 @@ // @section info // Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes. +#define STRING_CONFIG_H_AUTHOR "(wjohnsaunders, SapphirePlus)" // Who made the changes. //#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) /** @@ -102,14 +108,16 @@ * * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] */ -#define SERIAL_PORT 0 +#define SERIAL_PORT 3 /** * Select a secondary serial port on the board to use for communication with the host. * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] */ -//#define SERIAL_PORT_2 -1 +#if DISABLED(SAPPHIRE_PLUS_TMC_UART) + #define SERIAL_PORT_2 1 +#endif /** * Select a third serial port on the board to use for communication with the host. @@ -127,18 +135,18 @@ * * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ -#define BAUDRATE 250000 +#define BAUDRATE 115200 // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH // Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_RAMPS_14_EFB + #define MOTHERBOARD BOARD_MKS_ROBIN_NANO #endif // Name displayed in the LCD "Ready" message and Info menu -//#define CUSTOM_MACHINE_NAME "3D Printer" +#define CUSTOM_MACHINE_NAME "TwoTrees Sapphire Plus" // Printer's unique ID, used by some programs to differentiate between machines. // Choose your own or use a service like https://www.uuidgenerator.net/version4 @@ -424,7 +432,7 @@ #define TEMP_SENSOR_5 0 #define TEMP_SENSOR_6 0 #define TEMP_SENSOR_7 0 -#define TEMP_SENSOR_BED 0 +#define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 #define TEMP_SENSOR_COOLER 0 @@ -472,7 +480,7 @@ // Above this temperature the heater will be switched off. // This can protect components from overheating, but NOT from shorts and failures. // (Use MINTEMP for thermistor short/failure protection.) -#define HEATER_0_MAXTEMP 275 +#define HEATER_0_MAXTEMP 260 #define HEATER_1_MAXTEMP 275 #define HEATER_2_MAXTEMP 275 #define HEATER_3_MAXTEMP 275 @@ -480,7 +488,7 @@ #define HEATER_5_MAXTEMP 275 #define HEATER_6_MAXTEMP 275 #define HEATER_7_MAXTEMP 275 -#define BED_MAXTEMP 150 +#define BED_MAXTEMP 120 #define CHAMBER_MAXTEMP 60 /** @@ -505,21 +513,22 @@ #define PID_K1 0.95 // Smoothing factor within any PID loop #if ENABLED(PIDTEMP) - //#define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) - //#define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) + #define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) + #define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) // Set/get with gcode: M301 E[extruder number, 0-2] #if ENABLED(PID_PARAMS_PER_HOTEND) // Specify between 1 and HOTENDS values per array. // If fewer than EXTRUDER values are provided, the last element will be repeated. - #define DEFAULT_Kp_LIST { 22.20, 22.20 } - #define DEFAULT_Ki_LIST { 1.08, 1.08 } - #define DEFAULT_Kd_LIST { 114.00, 114.00 } + #define DEFAULT_Kp_LIST { 12.02, 12.02 } + #define DEFAULT_Ki_LIST { 0.75, 0.75 } + #define DEFAULT_Kd_LIST { 49.50, 49.50 } #else - #define DEFAULT_Kp 22.20 - #define DEFAULT_Ki 1.08 - #define DEFAULT_Kd 114.00 + // Sapphire S/Pro/Plus + #define DEFAULT_Kp 12.02 + #define DEFAULT_Ki 0.75 + #define DEFAULT_Kd 49.50 #endif #endif // PIDTEMP @@ -540,7 +549,7 @@ * heater. If your configuration is significantly different than this and you don't understand * the issues involved, don't use bed PID until someone else verifies that your hardware works. */ -//#define PIDTEMPBED +#define PIDTEMPBED //#define BED_LIMIT_SWITCHING @@ -556,11 +565,10 @@ //#define MIN_BED_POWER 0 //#define PID_BED_DEBUG // Sends debug data to the serial port. - // 120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - // from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) - #define DEFAULT_bedKp 10.00 - #define DEFAULT_bedKi .023 - #define DEFAULT_bedKd 305.4 + // Sapphire Plus + #define DEFAULT_bedKp 91.90 + #define DEFAULT_bedKi 15.49 + #define DEFAULT_bedKd 363.6 // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. #endif // PIDTEMPBED @@ -613,7 +621,7 @@ //#define PID_DEBUG // Sends debug data to the serial port. Use 'M303 D' to toggle activation. //#define PID_OPENLOOP // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX //#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay - #define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature + #define PID_FUNCTIONAL_RANGE 25 // If the temperature difference between the target temperature and the actual temperature // is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max. #endif @@ -634,7 +642,7 @@ * Note: For Bowden Extruders make this large enough to allow load/unload. */ #define PREVENT_LENGTHY_EXTRUDE -#define EXTRUDE_MAXLENGTH 200 +#define EXTRUDE_MAXLENGTH 950 //=========================================================================== //======================== Thermal Runaway Protection ======================= @@ -666,7 +674,7 @@ // Enable one of the options below for CoreXY, CoreXZ, or CoreYZ kinematics, // either in the usual order or reversed -//#define COREXY +#define COREXY //#define COREXZ //#define COREYZ //#define COREYX @@ -684,11 +692,13 @@ // Almost all printers will be using one per axis. Probes will use one or more of the // extra connectors. Leave undefined any used for non-endstop and non-probe purposes. #define USE_XMIN_PLUG -#define USE_YMIN_PLUG +//#define USE_YMIN_PLUG #define USE_ZMIN_PLUG //#define USE_XMAX_PLUG -//#define USE_YMAX_PLUG -//#define USE_ZMAX_PLUG +#define USE_YMAX_PLUG +#if DISABLED(SAPPHIRE_PLUS_BLTOUCH) + #define USE_ZMAX_PLUG +#endif // Enable pullup for all endstops to prevent a floating state #define ENDSTOPPULLUPS @@ -717,13 +727,18 @@ #endif // Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. +#if DISABLED(SAPPHIRE_PLUS_BLTOUCH) + #define SP_INVERTING true +#else + #define SP_INVERTING false +#endif +#define X_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. #define Y_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. +#define Z_MIN_ENDSTOP_INVERTING SP_INVERTING // Set to true to invert the logic of the endstop. #define X_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_PROBE_ENDSTOP_INVERTING false // Set to true to invert the logic of the probe. +#define Y_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Z_MAX_ENDSTOP_INVERTING SP_INVERTING // Set to true to invert the logic of the endstop. +#define Z_MIN_PROBE_ENDSTOP_INVERTING SP_INVERTING // Set to true to invert the logic of the probe. /** * Stepper Drivers @@ -743,15 +758,15 @@ * TMC5130, TMC5130_STANDALONE, TMC5160, TMC5160_STANDALONE * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'L6474', 'POWERSTEP01', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2160', 'TMC2160_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC2209', 'TMC2209_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE', 'TMC5160', 'TMC5160_STANDALONE'] */ -#define X_DRIVER_TYPE A4988 -#define Y_DRIVER_TYPE A4988 +#define X_DRIVER_TYPE TERN(SAPPHIRE_PLUS_TMC_UART,TMC2208,TMC2208_STANDALONE) +#define Y_DRIVER_TYPE TERN(SAPPHIRE_PLUS_TMC_UART,TMC2208,TMC2208_STANDALONE) #define Z_DRIVER_TYPE A4988 //#define X2_DRIVER_TYPE A4988 //#define Y2_DRIVER_TYPE A4988 -//#define Z2_DRIVER_TYPE A4988 +#define Z2_DRIVER_TYPE A4988 //#define Z3_DRIVER_TYPE A4988 //#define Z4_DRIVER_TYPE A4988 -#define E0_DRIVER_TYPE A4988 +#define E0_DRIVER_TYPE TERN(SAPPHIRE_PLUS_TMC_UART,TMC2208,TMC2208_STANDALONE) //#define E1_DRIVER_TYPE A4988 //#define E2_DRIVER_TYPE A4988 //#define E3_DRIVER_TYPE A4988 @@ -760,9 +775,23 @@ //#define E6_DRIVER_TYPE A4988 //#define E7_DRIVER_TYPE A4988 +#if ENABLED(SAPPHIRE_PLUS_TMC_UART) +#define X_SERIAL_TX_PIN PA9 // Wifi TX +#define X_SERIAL_RX_PIN PA9 +#define Y_SERIAL_TX_PIN PA10 // Wifi RX +#define Y_SERIAL_RX_PIN PA10 +#define Z_SERIAL_TX_PIN PC13 // WIFI IO0 +#define Z_SERIAL_RX_PIN PC13 +#define E0_SERIAL_TX_PIN PE5 // MAX31855 CS +#define E0_SERIAL_RX_PIN PE5 +#define E1_SERIAL_TX_PIN PC7 // WIFI IO1 +#define E1_SERIAL_RX_PIN PC7 +#define TMC_BAUD_RATE 19200 // Reduced to improve software serial reliability +#endif + // Enable this feature if all enabled endstop pins are interrupt-capable. // This will remove the need to poll the interrupt pins, saving many CPU cycles. -//#define ENDSTOP_INTERRUPTS_FEATURE +#define ENDSTOP_INTERRUPTS_FEATURE /** * Endstop Noise Threshold @@ -806,14 +835,14 @@ * Override with M92 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 500 } +#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 410 } /** * Default Max Feed Rate (mm/s) * Override with M203 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 } +#define DEFAULT_MAX_FEEDRATE { 300, 300, 10, 70 } //#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 #if ENABLED(LIMITED_MAX_FR_EDITING) @@ -841,9 +870,9 @@ * M204 R Retract Acceleration * M204 T Travel Acceleration */ -#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves +#define DEFAULT_ACCELERATION 1000 // X, Y, Z and E acceleration for printing moves +#define DEFAULT_RETRACT_ACCELERATION 2000 // E acceleration for retracts +#define DEFAULT_TRAVEL_ACCELERATION 2000 // X, Y, Z acceleration for travel (non printing) moves /** * Default Jerk limits (mm/s) @@ -855,9 +884,9 @@ */ //#define CLASSIC_JERK #if ENABLED(CLASSIC_JERK) - #define DEFAULT_XJERK 10.0 - #define DEFAULT_YJERK 10.0 - #define DEFAULT_ZJERK 0.3 + #define DEFAULT_XJERK 15.0 + #define DEFAULT_YJERK 15.0 + #define DEFAULT_ZJERK 0.4 //#define TRAVEL_EXTRA_XYJERK 0.0 // Additional jerk allowance for all travel moves @@ -877,7 +906,7 @@ * https://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html */ #if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.013 // (mm) Distance from real junction edge + #define JUNCTION_DEVIATION_MM 0.03 // (mm) Distance from real junction edge #define JD_HANDLE_SMALL_SEGMENTS // Use curvature estimation instead of just the junction angle // for small segments (< 1mm) with large junction angles (> 135°). #endif @@ -890,7 +919,7 @@ * * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained */ -//#define S_CURVE_ACCELERATION +#define S_CURVE_ACCELERATION //=========================================================================== //============================= Z Probe Options ============================= @@ -963,7 +992,9 @@ /** * The BLTouch probe uses a Hall effect sensor and emulates a servo. */ -//#define BLTOUCH +#if ENABLED(SAPPHIRE_PLUS_BLTOUCH) + #define BLTOUCH +#endif /** * Touch-MI Probe by hotends.fr @@ -1055,20 +1086,25 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +#if ENABLED(SAPPHIRE_PLUS_BLTOUCH) + // https://www.thingiverse.com/thing:4361883 + #define NOZZLE_TO_PROBE_OFFSET { 0, -42.0, -2.94 } +#else + #define NOZZLE_TO_PROBE_OFFSET { 0, 0, 0 } +#endif // Most probes should stay away from the edges of the bed, but // with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed (mm/min) between probes -#define XY_PROBE_FEEDRATE (133*60) +#define XY_PROBE_FEEDRATE (150*60) // Feedrate (mm/min) for the first approach when double-probing (MULTIPLE_PROBING == 2) -#define Z_PROBE_FEEDRATE_FAST (4*60) +#define Z_PROBE_FEEDRATE_FAST (8*60) // Feedrate (mm/min) for the "accurate" probe of each point -#define Z_PROBE_FEEDRATE_SLOW (Z_PROBE_FEEDRATE_FAST / 2) +#define Z_PROBE_FEEDRATE_SLOW (Z_PROBE_FEEDRATE_FAST / 4) /** * Probe Activation Switch @@ -1123,9 +1159,9 @@ * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. */ -#define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow -#define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points -#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes +#define Z_CLEARANCE_DEPLOY_PROBE 4 // Z Clearance for Deploy/Stow +#define Z_CLEARANCE_BETWEEN_PROBES 3 // Z Clearance between probe points +#define Z_CLEARANCE_MULTI_PROBE 3 // Z Clearance between multiple probes //#define Z_AFTER_PROBING 5 // Z position after probing is done #define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping @@ -1135,7 +1171,9 @@ #define Z_PROBE_OFFSET_RANGE_MAX 20 // Enable the M48 repeatability test to test probe accuracy -//#define Z_MIN_PROBE_REPEATABILITY_TEST +#if ENABLED(SAPPHIRE_PLUS_BLTOUCH) + #define Z_MIN_PROBE_REPEATABILITY_TEST +#endif // Before deploy/stow pause for user confirmation //#define PAUSE_BEFORE_DEPLOY_STOW @@ -1190,14 +1228,14 @@ // @section machine // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR false +#define INVERT_X_DIR true #define INVERT_Y_DIR true #define INVERT_Z_DIR false // @section extruder // For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR false +#define INVERT_E0_DIR true #define INVERT_E1_DIR false #define INVERT_E2_DIR false #define INVERT_E3_DIR false @@ -1209,7 +1247,7 @@ // @section homing //#define NO_MOTION_BEFORE_HOMING // Inhibit movement until all axes have been homed. Also enable HOME_AFTER_DEACTIVATE for extra safety. -//#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated. Also enable NO_MOTION_BEFORE_HOMING for extra safety. +#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated. Also enable NO_MOTION_BEFORE_HOMING for extra safety. /** * Set Z_IDLE_HEIGHT if the Z-Axis moves on its own when steppers are disabled. @@ -1218,30 +1256,30 @@ */ //#define Z_IDLE_HEIGHT Z_HOME_POS -//#define Z_HOMING_HEIGHT 4 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ... +#define Z_HOMING_HEIGHT 4 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ... // Be sure to have this much clearance over your Z_MAX_POS to prevent grinding. -//#define Z_AFTER_HOMING 10 // (mm) Height to move to after homing Z +#define Z_AFTER_HOMING 10 // (mm) Height to move to after homing Z // Direction of endstops when homing; 1=MAX, -1=MIN // :[-1,1] #define X_HOME_DIR -1 -#define Y_HOME_DIR -1 +#define Y_HOME_DIR 1 #define Z_HOME_DIR -1 // @section machine // The size of the printable area -#define X_BED_SIZE 200 -#define Y_BED_SIZE 200 +#define X_BED_SIZE 300 +#define Y_BED_SIZE 295 // To stop pulleys hitting stepper mounts // Travel limits (mm) after homing, corresponding to endstop positions. -#define X_MIN_POS 0 +#define X_MIN_POS -5 // Centre printable area on the bed #define Y_MIN_POS 0 #define Z_MIN_POS 0 #define X_MAX_POS X_BED_SIZE #define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 200 +#define Z_MAX_POS TERN(SAPPHIRE_PLUS_BLTOUCH, 335, 340) // BLTouch needs clearance for homing /** * Software Endstops @@ -1269,7 +1307,7 @@ #endif #if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS) - //#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD + #define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD #endif /** @@ -1285,7 +1323,9 @@ * RAMPS-based boards use SERVO3_PIN for the first runout sensor. * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. */ -//#define FILAMENT_RUNOUT_SENSOR +#if DISABLED(SAPPHIRE_PLUS_MKS_UI) + #define FILAMENT_RUNOUT_SENSOR +#endif #if ENABLED(FILAMENT_RUNOUT_SENSOR) #define FIL_RUNOUT_ENABLED_DEFAULT true // Enable the sensor on startup. Override with M412 followed by M500. #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. @@ -1387,16 +1427,19 @@ */ //#define AUTO_BED_LEVELING_3POINT //#define AUTO_BED_LEVELING_LINEAR -//#define AUTO_BED_LEVELING_BILINEAR +#if ENABLED(SAPPHIRE_PLUS_BLTOUCH) + #define AUTO_BED_LEVELING_BILINEAR +#else + #define MESH_BED_LEVELING +#endif //#define AUTO_BED_LEVELING_UBL -//#define MESH_BED_LEVELING /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable * leveling immediately after G28. */ -//#define RESTORE_LEVELING_AFTER_G28 +#define RESTORE_LEVELING_AFTER_G28 //#define ENABLE_LEVELING_AFTER_G28 /** @@ -1438,12 +1481,12 @@ /** * Enable the G26 Mesh Validation Pattern tool. */ - //#define G26_MESH_VALIDATION + #define G26_MESH_VALIDATION #if ENABLED(G26_MESH_VALIDATION) #define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle. #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for G26. - #define MESH_TEST_HOTEND_TEMP 205 // (°C) Default nozzle temperature for G26. - #define MESH_TEST_BED_TEMP 60 // (°C) Default bed temperature for G26. + #define MESH_TEST_HOTEND_TEMP 190 // (°C) Default nozzle temperature for G26. + #define MESH_TEST_BED_TEMP 50 // (°C) Default bed temperature for G26. #define G26_XY_FEEDRATE 20 // (mm/s) Feedrate for G26 XY moves. #define G26_XY_FEEDRATE_TRAVEL 100 // (mm/s) Feedrate for G26 XY travel moves. #define G26_RETRACT_MULTIPLIER 1.0 // G26 Q (retraction) used by default between mesh test elements. @@ -1454,7 +1497,7 @@ #if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR) // Set the number of grid points per dimension. - #define GRID_MAX_POINTS_X 3 + #define GRID_MAX_POINTS_X 5 #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X // Probe along the Y axis, advancing X after each column @@ -1464,13 +1507,13 @@ // Beyond the probed grid, continue the implied tilt? // Default is to maintain the height of the nearest edge. - //#define EXTRAPOLATE_BEYOND_GRID + #define EXTRAPOLATE_BEYOND_GRID // // Experimental Subdivision of the grid by Catmull-Rom method. // Synthesizes intermediate points to produce a more detailed mesh. // - //#define ABL_BILINEAR_SUBDIVISION + #define ABL_BILINEAR_SUBDIVISION #if ENABLED(ABL_BILINEAR_SUBDIVISION) // Number of subdivisions between probe points #define BILINEAR_SUBDIVISIONS 3 @@ -1487,7 +1530,7 @@ //#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh #define MESH_INSET 1 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. + #define GRID_MAX_POINTS_X 9 // Don't use more than 15 points per axis, implementation limited. #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X //#define UBL_HILBERT_CURVE // Use Hilbert distribution for less travel when probing multiple points @@ -1506,7 +1549,7 @@ //=================================== Mesh ================================== //=========================================================================== - #define MESH_INSET 10 // Set Mesh bounds as an inset region of the bed + #define MESH_INSET 35 // Set Mesh bounds as an inset region of the bed #define GRID_MAX_POINTS_X 3 // Don't use more than 7 points per axis, implementation limited. #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X @@ -1518,19 +1561,21 @@ * Add a bed leveling sub-menu for ABL or MBL. * Include a guided procedure if manual probing is enabled. */ -//#define LCD_BED_LEVELING +#if DISABLED(SAPPHIRE_PLUS_MKS_UI) + #define LCD_BED_LEVELING +#endif #if ENABLED(LCD_BED_LEVELING) - #define MESH_EDIT_Z_STEP 0.025 // (mm) Step size while manually probing Z axis. + #define MESH_EDIT_Z_STEP 0.02 // (mm) Step size while manually probing Z axis. #define LCD_PROBE_Z_RANGE 4 // (mm) Z Range centered on Z_MIN_POS for LCD Z adjustment - //#define MESH_EDIT_MENU // Add a menu to edit mesh points + #define MESH_EDIT_MENU // Add a menu to edit mesh points #endif // Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS +#define LEVEL_BED_CORNERS #if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets + #define LEVEL_CORNERS_INSET_LFRB { 35, 35, 35, 35 } // (mm) Left, Front, Right, Back insets #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points //#define LEVEL_CENTER_TOO // Move to the center after the last corner @@ -1565,7 +1610,7 @@ * Commands to execute at the end of G29 probing. * Useful to retract or move the Z probe out of the way. */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X20 Y280" // @section homing @@ -1587,7 +1632,9 @@ // - Move the Z probe (or nozzle) to a defined XY point before Z Homing. // - Prevent Z homing when the Z probe is outside bed area. // -//#define Z_SAFE_HOMING +#if ENABLED(SAPPHIRE_PLUS_BLTOUCH) + #define Z_SAFE_HOMING +#endif #if ENABLED(Z_SAFE_HOMING) #define Z_SAFE_HOMING_X_POINT X_CENTER // X point for Z homing @@ -1595,7 +1642,7 @@ #endif // Homing speeds (mm/min) -#define HOMING_FEEDRATE_MM_M { (50*60), (50*60), (4*60) } +#define HOMING_FEEDRATE_MM_M { (30*60), (30*60), (8*60) } // Validate that endstops are triggered on homing moves #define VALIDATE_HOMING_ENDSTOPS @@ -1672,12 +1719,14 @@ * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) */ -//#define EEPROM_SETTINGS // Persistent storage with M500 and M501 +#define EEPROM_SETTINGS // Persistent storage with M500 and M501 //#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. #define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load #if ENABLED(EEPROM_SETTINGS) - //#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. + #if ENABLED(SAPPHIRE_PLUS_MKS_UI) + #define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. + #endif #endif // @@ -1706,14 +1755,14 @@ // Preheat Constants - Up to 5 are supported without changes // #define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 180 -#define PREHEAT_1_TEMP_BED 70 +#define PREHEAT_1_TEMP_HOTEND 190 +#define PREHEAT_1_TEMP_BED 50 #define PREHEAT_1_TEMP_CHAMBER 35 #define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 #define PREHEAT_2_LABEL "ABS" #define PREHEAT_2_TEMP_HOTEND 240 -#define PREHEAT_2_TEMP_BED 110 +#define PREHEAT_2_TEMP_BED 90 #define PREHEAT_2_TEMP_CHAMBER 35 #define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 @@ -1728,7 +1777,7 @@ * P1 Raise the nozzle always to Z-park height. * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. */ -//#define NOZZLE_PARK_FEATURE +#define NOZZLE_PARK_FEATURE #if ENABLED(NOZZLE_PARK_FEATURE) // Specify a park position as { X, Y, Z_raise } @@ -1845,7 +1894,7 @@ * * View the current statistics with M78. */ -//#define PRINTCOUNTER +#define PRINTCOUNTER #if ENABLED(PRINTCOUNTER) #define PRINTCOUNTER_SAVE_INTERVAL 60 // (minutes) EEPROM save interval during print #endif @@ -1936,14 +1985,14 @@ * SD Card support is disabled by default. If your controller has an SD slot, * you must uncomment the following option or it won't work. */ -//#define SDSUPPORT +#define SDSUPPORT /** * SD CARD: ENABLE CRC * * Use CRC checks and retries on the SD communication. */ -//#define SD_CHECK_AND_RETRY +#define SD_CHECK_AND_RETRY /** * LCD Menu Items @@ -2006,7 +2055,7 @@ // // Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. // -//#define INDIVIDUAL_AXIS_HOMING_MENU +#define INDIVIDUAL_AXIS_HOMING_MENU // // SPEAKER/BUZZER @@ -2472,7 +2521,7 @@ // 480x320, 3.5", FSMC Display From MKS // Normally used in MKS Robin Nano V1.2 // -//#define MKS_ROBIN_TFT35 +#define MKS_ROBIN_TFT35 // // 480x272, 4.3", FSMC Display From MKS @@ -2524,13 +2573,13 @@ #define TFT_DRIVER AUTO // Interface. Enable one of the following options: - //#define TFT_INTERFACE_FSMC + #define TFT_INTERFACE_FSMC //#define TFT_INTERFACE_SPI // TFT Resolution. Enable one of the following options: //#define TFT_RES_320x240 //#define TFT_RES_480x272 - //#define TFT_RES_480x320 + #define TFT_RES_480x320 #endif /** @@ -2544,11 +2593,10 @@ * root of your SD card, together with the compiled firmware. */ //#define TFT_CLASSIC_UI -//#define TFT_COLOR_UI -//#define TFT_LVGL_UI - -#if ENABLED(TFT_LVGL_UI) - //#define MKS_WIFI_MODULE // MKS WiFi module +#if DISABLED(SAPPHIRE_PLUS_MKS_UI) + #define TFT_COLOR_UI +#else + #define TFT_LVGL_UI #endif /** @@ -2573,7 +2621,9 @@ // // Touch Screen Settings // -//#define TOUCH_SCREEN +#if DISABLED(SAPPHIRE_PLUS_MKS_UI) + #define TOUCH_SCREEN +#endif #if ENABLED(TOUCH_SCREEN) #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus diff --git a/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2/Configuration_adv.h b/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2/Configuration_adv.h index 5335fa012a..c16f5841d6 100644 --- a/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2/Configuration_adv.h +++ b/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2/Configuration_adv.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Two Trees/Sapphire Plus/Sapphire Plus V2" + /** * Configuration_adv.h * @@ -266,8 +268,8 @@ * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 40 // Seconds + #define THERMAL_PROTECTION_BED_HYSTERESIS 5 // Degrees Celsius /** * As described above, except for the bed (M140/M190/M303). @@ -437,7 +439,7 @@ * Hotend Idle Timeout * Prevent filament in the nozzle from charring and causing a critical jam. */ -//#define HOTEND_IDLE_TIMEOUT +#define HOTEND_IDLE_TIMEOUT #if ENABLED(HOTEND_IDLE_TIMEOUT) #define HOTEND_IDLE_TIMEOUT_SEC (5*60) // (seconds) Time without extruder movement to trigger protection #define HOTEND_IDLE_MIN_TRIGGER 180 // (°C) Minimum temperature to enable hotend protection @@ -479,7 +481,7 @@ // When first starting the main fan, run it at full speed for the // given number of milliseconds. This gets the fan spinning reliably // before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) -//#define FAN_KICKSTART_TIME 100 +#define FAN_KICKSTART_TIME 100 // Some coolers may require a non-zero "off" state. //#define FAN_OFF_PWM 1 @@ -496,8 +498,8 @@ * * Define one or both of these to override the default 0-255 range. */ -//#define FAN_MIN_PWM 50 -//#define FAN_MAX_PWM 128 +#define FAN_MIN_PWM 64 +#define FAN_MAX_PWM 255 /** * FAST PWM FAN Settings @@ -540,7 +542,7 @@ * Multiple extruders can be assigned to the same pin in which case * the fan will turn on when any selected extruder is above the threshold. */ -#define E0_AUTO_FAN_PIN -1 +#define E0_AUTO_FAN_PIN FAN1_PIN #define E1_AUTO_FAN_PIN -1 #define E2_AUTO_FAN_PIN -1 #define E3_AUTO_FAN_PIN -1 @@ -648,7 +650,7 @@ // // For Z set the number of stepper drivers // -#define NUM_Z_STEPPER_DRIVERS 1 // (1-4) Z options change based on how many +#define NUM_Z_STEPPER_DRIVERS 2 // (1-4) Z options change based on how many #if NUM_Z_STEPPER_DRIVERS > 1 // Enable if Z motor direction signals are the opposite of Z1 @@ -656,9 +658,11 @@ //#define INVERT_Z3_VS_Z_DIR //#define INVERT_Z4_VS_Z_DIR - //#define Z_MULTI_ENDSTOPS + #if DISABLED(SAPPHIRE_PLUS_BLTOUCH) + #define Z_MULTI_ENDSTOPS + #endif #if ENABLED(Z_MULTI_ENDSTOPS) - #define Z2_USE_ENDSTOP _XMAX_ + #define Z2_USE_ENDSTOP _ZMAX_ #define Z2_ENDSTOP_ADJUSTMENT 0 #if NUM_Z_STEPPER_DRIVERS >= 3 #define Z3_USE_ENDSTOP _YMAX_ @@ -741,7 +745,7 @@ //#define HOMING_BACKOFF_POST_MM { 2, 2, 2 } // (mm) Backoff from endstops after homing -//#define QUICK_HOME // If G28 contains XY do a diagonal move first +#define QUICK_HOME // If G28 contains XY do a diagonal move first //#define HOME_Y_BEFORE_X // If G28 contains XY home Y before X //#define HOME_Z_FIRST // Home Z first. Requires a Z-MIN endstop (not a probe). //#define CODEPENDENT_XY_HOMING // If X/Y can't home without homing Y/X first @@ -821,12 +825,14 @@ * Z Steppers Auto-Alignment * Add the G34 command to align multiple Z steppers using a bed probe. */ -//#define Z_STEPPER_AUTO_ALIGN +#if ENABLED(SAPPHIRE_PLUS_BLTOUCH) + #define Z_STEPPER_AUTO_ALIGN +#endif #if ENABLED(Z_STEPPER_AUTO_ALIGN) // Define probe X and Y positions for Z1, Z2 [, Z3 [, Z4]] // If not defined, probe limits will be used. // Override with 'M422 S X Y' - //#define Z_STEPPER_ALIGN_XY { { 10, 190 }, { 100, 10 }, { 190, 190 } } + #define Z_STEPPER_ALIGN_XY { { 20, 150 }, { 280, 150 } } /** * Orientation for the automatically-calculated probe positions. @@ -848,7 +854,7 @@ * | 1 2 | 2 3 | 3 4 | 4 1 | */ #ifndef Z_STEPPER_ALIGN_XY - //#define Z_STEPPERS_ORIENTATION 0 + #define Z_STEPPERS_ORIENTATION 0 #endif // Provide Z stepper positions for more rapid convergence in bed alignment. @@ -878,11 +884,13 @@ // // Add the G35 command to read bed corners to help adjust screws. Requires a bed probe. // -//#define ASSISTED_TRAMMING +#if ENABLED(SAPPHIRE_PLUS_BLTOUCH) + #define ASSISTED_TRAMMING +#endif #if ENABLED(ASSISTED_TRAMMING) // Define positions for probe points. - #define TRAMMING_POINT_XY { { 20, 20 }, { 180, 20 }, { 180, 180 }, { 20, 180 } } + #define TRAMMING_POINT_XY { { 45, 45 }, { 255, 45 }, { 255, 250 }, { 45, 250 } } // Define position names for probe points. #define TRAMMING_POINT_NAME_1 "Front-Left" @@ -891,9 +899,9 @@ #define TRAMMING_POINT_NAME_4 "Back-Left" #define RESTORE_LEVELING_AFTER_G35 // Enable to restore leveling setup after operation - //#define REPORT_TRAMMING_MM // Report Z deviation (mm) for each point relative to the first + #define REPORT_TRAMMING_MM // Report Z deviation (mm) for each point relative to the first - //#define ASSISTED_TRAMMING_WIZARD // Add a Tramming Wizard to the LCD menu + #define ASSISTED_TRAMMING_WIZARD // Add a Tramming Wizard to the LCD menu //#define ASSISTED_TRAMMING_WAIT_POSITION { X_CENTER, Y_CENTER, 30 } // Move the nozzle out of the way for adjustment @@ -903,7 +911,7 @@ * M4: 40 = Clockwise, 41 = Counter-Clockwise * M5: 50 = Clockwise, 51 = Counter-Clockwise */ - #define TRAMMING_SCREW_THREAD 30 + #define TRAMMING_SCREW_THREAD 40 #endif @@ -942,7 +950,7 @@ // Increase the slowdown divisor for larger buffer sizes. #define SLOWDOWN #if ENABLED(SLOWDOWN) - #define SLOWDOWN_DIVISOR 2 + #define SLOWDOWN_DIVISOR 6 #endif /** @@ -1059,7 +1067,7 @@ * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the * lowest stepping frequencies. */ -//#define ADAPTIVE_STEP_SMOOTHING +#define ADAPTIVE_STEP_SMOOTHING /** * Custom Microstepping @@ -1160,14 +1168,14 @@ // Add Probe Z Offset calibration to the Z Probe Offsets menu #if HAS_BED_PROBE - //#define PROBE_OFFSET_WIZARD + #define PROBE_OFFSET_WIZARD #if ENABLED(PROBE_OFFSET_WIZARD) // // Enable to init the Probe Z-Offset when starting the Wizard. // Use a height slightly above the estimated nozzle-to-probe Z offset. // For example, with an offset of -5, consider a starting height of -4. // - //#define PROBE_OFFSET_WIZARD_START_Z -4.0 + #define PROBE_OFFSET_WIZARD_START_Z -2.0 // Set a convenient position to do the calibration (probing point and nozzle/bed-distance) //#define PROBE_OFFSET_WIZARD_XY_POS { X_CENTER, Y_CENTER } @@ -1175,16 +1183,16 @@ #endif // Include a page of printer information in the LCD Main Menu - //#define LCD_INFO_MENU + #define LCD_INFO_MENU #if ENABLED(LCD_INFO_MENU) //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages #endif // BACK menu items keep the highlight at the top - //#define TURBO_BACK_MENU_ITEM + #define TURBO_BACK_MENU_ITEM // Add a mute option to the LCD menu - //#define SOUND_MENU_ITEM + #define SOUND_MENU_ITEM /** * LED Control Menu @@ -1222,7 +1230,7 @@ //#define LCD_TIMEOUT_TO_STATUS 15000 #if ENABLED(SHOW_BOOTSCREEN) - #define BOOTSCREEN_TIMEOUT 4000 // (ms) Total Duration to display the boot screen(s) + #define BOOTSCREEN_TIMEOUT 1500 // (ms) Total Duration to display the boot screen(s) #if EITHER(HAS_MARLINUI_U8GLIB, TFT_COLOR_UI) #define BOOT_MARLIN_LOGO_SMALL // Show a smaller Marlin logo on the Boot Screen (saving lots of flash) #endif @@ -1315,7 +1323,7 @@ * an option on the LCD screen to continue the print from the last-known * point in the file. */ - //#define POWER_LOSS_RECOVERY + #define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) //#define BACKUP_POWER_SUPPLY // Backup power / UPS to move the steppers on power loss @@ -1361,15 +1369,15 @@ * - SDSORT_CACHE_NAMES will retain the sorted file listing in RAM. (Expensive!) * - SDSORT_DYNAMIC_RAM only uses RAM when the SD menu is visible. (Use with caution!) */ - //#define SDCARD_SORT_ALPHA + #define SDCARD_SORT_ALPHA // SD Card Sorting options #if ENABLED(SDCARD_SORT_ALPHA) #define SDSORT_LIMIT 40 // Maximum number of sorted items (10-256). Costs 27 bytes each. #define FOLDER_SORTING -1 // -1=above 0=none 1=below #define SDSORT_GCODE false // Allow turning sorting on/off with LCD and M34 G-code. - #define SDSORT_USES_RAM false // Pre-allocate a static array for faster pre-sorting. - #define SDSORT_USES_STACK false // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.) + #define SDSORT_USES_RAM true // Pre-allocate a static array for faster pre-sorting. + #define SDSORT_USES_STACK true // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.) #define SDSORT_CACHE_NAMES false // Keep sorted items in RAM longer for speedy performance. Most expensive option. #define SDSORT_DYNAMIC_RAM false // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use! #define SDSORT_CACHE_VFATS 2 // Maximum number of 13-byte VFAT entries to use for sorting. @@ -1381,10 +1389,10 @@ //#define UTF_FILENAME_SUPPORT // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT + #define LONG_FILENAME_HOST_SUPPORT // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES + #define SCROLL_LONG_FILENAMES // Leave the heaters on after Stop Print (not recommended!) //#define SD_ABORT_NO_COOLDOWN @@ -1406,7 +1414,7 @@ /** * Auto-report SdCard status with M27 S */ - //#define AUTO_REPORT_SD_STATUS + #define AUTO_REPORT_SD_STATUS /** * Support for USB thumb drives using an Arduino USB Host Shield or @@ -1512,7 +1520,7 @@ */ #if HAS_MARLINUI_U8GLIB // Show SD percentage next to the progress bar - //#define DOGM_SD_PERCENT + #define DOGM_SD_PERCENT // Save many cycles by drawing a hollow frame or no frame on the Info Screen //#define XYZ_NO_FRAME @@ -1790,7 +1798,7 @@ * * Warning: Does not respect endstops! */ -//#define BABYSTEPPING +#define BABYSTEPPING #if ENABLED(BABYSTEPPING) //#define INTEGRATED_BABYSTEPPING // EXPERIMENTAL integration of babystepping into the Stepper ISR //#define BABYSTEP_WITHOUT_HOMING @@ -1801,7 +1809,7 @@ #define BABYSTEP_MULTIPLICATOR_Z 1 // (steps or mm) Steps or millimeter distance for each Z babystep #define BABYSTEP_MULTIPLICATOR_XY 1 // (steps or mm) Steps or millimeter distance for each XY babystep - //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. + #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. // Note: Extra time may be added to mitigate controller latency. @@ -1837,12 +1845,12 @@ * * See https://marlinfw.org/docs/features/lin_advance.html for full instructions. */ -//#define LIN_ADVANCE +#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) //#define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants - #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed + #define LIN_ADVANCE_K 0.0 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // If enabled, this will generate debug information output over USB. - //#define EXPERIMENTAL_SCURVE // Enable this option to permit S-Curve Acceleration + #define EXPERIMENTAL_SCURVE // Enable this option to permit S-Curve Acceleration #endif // @section leveling @@ -1995,7 +2003,7 @@ #endif // Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes. -//#define BEZIER_CURVE_SUPPORT +#define BEZIER_CURVE_SUPPORT /** * Direct Stepping @@ -2082,7 +2090,7 @@ #if BOTH(SDSUPPORT, DIRECT_STEPPING) #define BLOCK_BUFFER_SIZE 8 #elif ENABLED(SDSUPPORT) - #define BLOCK_BUFFER_SIZE 16 + #define BLOCK_BUFFER_SIZE 32 #else #define BLOCK_BUFFER_SIZE 16 #endif @@ -2091,7 +2099,7 @@ // The ASCII buffer for serial input #define MAX_CMD_SIZE 96 -#define BUFSIZE 4 +#define BUFSIZE 32 // Transmission to Host Buffer Size // To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0. @@ -2106,12 +2114,12 @@ // Without XON/XOFF flow control (see SERIAL_XON_XOFF below) 32 bytes should be enough. // To use flow control, set this buffer size to at least 1024 bytes. // :[0, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048] -//#define RX_BUFFER_SIZE 1024 +#define RX_BUFFER_SIZE 2048 #if RX_BUFFER_SIZE >= 1024 // Enable to have the controller send XON/XOFF control characters to // the host to signal the RX buffer is becoming full. - //#define SERIAL_XON_XOFF + #define SERIAL_XON_XOFF #endif // Add M575 G-code to change the baud rate @@ -2141,7 +2149,7 @@ * Currently handles M108, M112, M410, M876 * NOTE: Not yet implemented for all platforms. */ -//#define EMERGENCY_PARSER +#define EMERGENCY_PARSER /** * Realtime Reporting (requires EMERGENCY_PARSER) @@ -2170,7 +2178,7 @@ //#define NO_TIMEOUTS 1000 // Milliseconds // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. -//#define ADVANCED_OK +#define ADVANCED_OK // Printrun may have trouble receiving long strings all at once. // This option inserts short delays between lines of serial output. @@ -2311,28 +2319,29 @@ * * Enable PARK_HEAD_ON_PAUSE to add the G-code M125 Pause and Park. */ -//#define ADVANCED_PAUSE_FEATURE +#if DISABLED(SAPPHIRE_PLUS_MKS_UI) + #define ADVANCED_PAUSE_FEATURE +#endif #if ENABLED(ADVANCED_PAUSE_FEATURE) - #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. - #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. - // This short retract is done immediately, before parking the nozzle. - #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast. + #define PAUSE_PARK_RETRACT_FEEDRATE 45 // (mm/s) Initial retract feedrate. + #define PAUSE_PARK_RETRACT_LENGTH 9 // (mm) Initial retract. + #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 30 // (mm/s) Unload filament feedrate. This can be pretty fast. #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload. + #define FILAMENT_CHANGE_UNLOAD_LENGTH 950 // (mm) The length of filament for a complete unload. // For Bowden, the full length of the tube and nozzle. // For direct drive, the full length of the nozzle. // Set to 0 for manual unloading. #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE 6 // (mm/s) Slow move when starting load. #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 0 // (mm) Slow length, to allow time to insert material. // 0 to disable start loading and skip to fast load only - #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast. + #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 15 // (mm/s) Load filament feedrate. This can be pretty fast. #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle. + #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 920 // (mm) Load length of filament, from extruder gear to nozzle. // For Bowden, the full length of the tube and nozzle. // For direct drive, the full length of the nozzle. //#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted. #define ADVANCED_PAUSE_PURGE_FEEDRATE 3 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate. - #define ADVANCED_PAUSE_PURGE_LENGTH 50 // (mm) Length to extrude after loading. + #define ADVANCED_PAUSE_PURGE_LENGTH 20 // (mm) Length to extrude after loading. // Set to 0 for manual extrusion. // Filament can be extruded repeatedly from the Filament Change menu // until extrusion is consistent, and to purge old filament. @@ -2340,19 +2349,19 @@ //#define ADVANCED_PAUSE_FANS_PAUSE // Turn off print-cooling fans while the machine is paused. // Filament Unload does a Retract, Delay, and Purge first: - #define FILAMENT_UNLOAD_PURGE_RETRACT 13 // (mm) Unload initial retract length. + #define FILAMENT_UNLOAD_PURGE_RETRACT 9 // (mm) Unload initial retract length. #define FILAMENT_UNLOAD_PURGE_DELAY 5000 // (ms) Delay for the filament to cool after retract. - #define FILAMENT_UNLOAD_PURGE_LENGTH 8 // (mm) An unretract is done, then this length is purged. + #define FILAMENT_UNLOAD_PURGE_LENGTH 0 // (mm) An unretract is done, then this length is purged. #define FILAMENT_UNLOAD_PURGE_FEEDRATE 25 // (mm/s) feedrate to purge before unload #define PAUSE_PARK_NOZZLE_TIMEOUT 45 // (seconds) Time limit before the nozzle is turned off for safety. - #define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed. + #define FILAMENT_CHANGE_ALERT_BEEPS 6 // Number of alert beeps to play when a response is needed. #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change. - //#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. + #define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. //#define HOME_BEFORE_FILAMENT_CHANGE // If needed, home before parking for filament change - //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. + #define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) #endif @@ -2719,7 +2728,7 @@ * Define your own with: * { , , hysteresis_start[1..8] } */ - #define CHOPPER_TIMING CHOPPER_DEFAULT_12V // All axes (override below) + #define CHOPPER_TIMING CHOPPER_DEFAULT_24V // All axes (override below) //#define CHOPPER_TIMING_X CHOPPER_TIMING // For X Axes (override below) //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X //#define CHOPPER_TIMING_Y CHOPPER_TIMING // For Y Axes (override below) @@ -3474,7 +3483,7 @@ //#define NO_WORKSPACE_OFFSETS // Extra options for the M114 "Current Position" report -//#define M114_DETAIL // Use 'M114` for details to check planner calculations +#define M114_DETAIL // Use 'M114` for details to check planner calculations //#define M114_REALTIME // Real current position based on forward kinematics //#define M114_LEGACY // M114 used to synchronize on every call. Enable if needed. diff --git a/config/examples/Two Trees/Sapphire Pro/Configuration.h b/config/examples/Two Trees/Sapphire Pro/Configuration.h index 78c2dc9160..a130fcff03 100644 --- a/config/examples/Two Trees/Sapphire Pro/Configuration.h +++ b/config/examples/Two Trees/Sapphire Pro/Configuration.h @@ -21,6 +21,12 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Two Trees/Sapphire Pro" + +//#define SPRO_INVERTED_E // Enable if the extruder runs the wrong way +//#define SPRO_TMC2209 // Enable for the TMC2209 driver version +//#define SPRO_BLTOUCH // Enable if you want to use BLTOUCH + /** * Configuration.h * @@ -69,7 +75,7 @@ // @section info // Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes. +#define STRING_CONFIG_H_AUTHOR "(ils15, default config)" // Who made the changes. //#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) /** @@ -102,14 +108,14 @@ * * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] */ -#define SERIAL_PORT 0 +#define SERIAL_PORT 3 /** * Select a secondary serial port on the board to use for communication with the host. * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] */ -//#define SERIAL_PORT_2 -1 +#define SERIAL_PORT_2 1 /** * Select a third serial port on the board to use for communication with the host. @@ -134,11 +140,11 @@ // Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_RAMPS_14_EFB + #define MOTHERBOARD BOARD_MKS_ROBIN_NANO #endif // Name displayed in the LCD "Ready" message and Info menu -//#define CUSTOM_MACHINE_NAME "3D Printer" +#define CUSTOM_MACHINE_NAME "Sapphire Pro" // Printer's unique ID, used by some programs to differentiate between machines. // Choose your own or use a service like https://www.uuidgenerator.net/version4 @@ -424,7 +430,7 @@ #define TEMP_SENSOR_5 0 #define TEMP_SENSOR_6 0 #define TEMP_SENSOR_7 0 -#define TEMP_SENSOR_BED 0 +#define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 #define TEMP_SENSOR_COOLER 0 @@ -505,21 +511,21 @@ #define PID_K1 0.95 // Smoothing factor within any PID loop #if ENABLED(PIDTEMP) - //#define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) - //#define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) + #define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) + #define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) // Set/get with gcode: M301 E[extruder number, 0-2] #if ENABLED(PID_PARAMS_PER_HOTEND) // Specify between 1 and HOTENDS values per array. // If fewer than EXTRUDER values are provided, the last element will be repeated. - #define DEFAULT_Kp_LIST { 22.20, 22.20 } - #define DEFAULT_Ki_LIST { 1.08, 1.08 } - #define DEFAULT_Kd_LIST { 114.00, 114.00 } + #define DEFAULT_Kp_LIST { 8.16, 8.16 } + #define DEFAULT_Ki_LIST { 0.37, 0.37 } + #define DEFAULT_Kd_LIST { 44.46, 44.46 } #else - #define DEFAULT_Kp 22.20 - #define DEFAULT_Ki 1.08 - #define DEFAULT_Kd 114.00 + #define DEFAULT_Kp 8.16 + #define DEFAULT_Ki 0.37 + #define DEFAULT_Kd 44.46 #endif #endif // PIDTEMP @@ -540,7 +546,7 @@ * heater. If your configuration is significantly different than this and you don't understand * the issues involved, don't use bed PID until someone else verifies that your hardware works. */ -//#define PIDTEMPBED +#define PIDTEMPBED //#define BED_LIMIT_SWITCHING @@ -556,11 +562,10 @@ //#define MIN_BED_POWER 0 //#define PID_BED_DEBUG // Sends debug data to the serial port. - // 120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - // from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) - #define DEFAULT_bedKp 10.00 - #define DEFAULT_bedKi .023 - #define DEFAULT_bedKd 305.4 + // Sapphire Pro + #define DEFAULT_bedKp 83.36 + #define DEFAULT_bedKi 16.25 + #define DEFAULT_bedKd 285.12 // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. #endif // PIDTEMPBED @@ -634,7 +639,7 @@ * Note: For Bowden Extruders make this large enough to allow load/unload. */ #define PREVENT_LENGTHY_EXTRUDE -#define EXTRUDE_MAXLENGTH 200 +#define EXTRUDE_MAXLENGTH 900 //=========================================================================== //======================== Thermal Runaway Protection ======================= @@ -666,7 +671,7 @@ // Enable one of the options below for CoreXY, CoreXZ, or CoreYZ kinematics, // either in the usual order or reversed -//#define COREXY +#define COREXY //#define COREXZ //#define COREYZ //#define COREYX @@ -684,10 +689,10 @@ // Almost all printers will be using one per axis. Probes will use one or more of the // extra connectors. Leave undefined any used for non-endstop and non-probe purposes. #define USE_XMIN_PLUG -#define USE_YMIN_PLUG +//#define USE_YMIN_PLUG #define USE_ZMIN_PLUG //#define USE_XMAX_PLUG -//#define USE_YMAX_PLUG +#define USE_YMAX_PLUG //#define USE_ZMAX_PLUG // Enable pullup for all endstops to prevent a floating state @@ -717,13 +722,13 @@ #endif // Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define X_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_PROBE_ENDSTOP_INVERTING false // Set to true to invert the logic of the probe. +#define X_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Y_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Z_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define X_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Y_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Z_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Z_MIN_PROBE_ENDSTOP_INVERTING true // Set to true to invert the logic of the probe. /** * Stepper Drivers @@ -743,15 +748,25 @@ * TMC5130, TMC5130_STANDALONE, TMC5160, TMC5160_STANDALONE * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'L6474', 'POWERSTEP01', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2160', 'TMC2160_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC2209', 'TMC2209_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE', 'TMC5160', 'TMC5160_STANDALONE'] */ -#define X_DRIVER_TYPE A4988 -#define Y_DRIVER_TYPE A4988 -#define Z_DRIVER_TYPE A4988 +#if ENABLED(SPRO_TMC2209) + #define X_DRIVER_TYPE TMC2209_STANDALONE + #define Y_DRIVER_TYPE TMC2209_STANDALONE + #define Z_DRIVER_TYPE TMC2209_STANDALONE +#else + #define X_DRIVER_TYPE TMC2208_STANDALONE + #define Y_DRIVER_TYPE TMC2208_STANDALONE + #define Z_DRIVER_TYPE A4988 +#endif //#define X2_DRIVER_TYPE A4988 //#define Y2_DRIVER_TYPE A4988 //#define Z2_DRIVER_TYPE A4988 //#define Z3_DRIVER_TYPE A4988 //#define Z4_DRIVER_TYPE A4988 -#define E0_DRIVER_TYPE A4988 +#if ENABLED(SPRO_TMC2209) + #define E0_DRIVER_TYPE TMC2209_STANDALONE +#else + #define E0_DRIVER_TYPE A4988 +#endif //#define E1_DRIVER_TYPE A4988 //#define E2_DRIVER_TYPE A4988 //#define E3_DRIVER_TYPE A4988 @@ -806,14 +821,14 @@ * Override with M92 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 500 } +#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 1600, 415 } /** * Default Max Feed Rate (mm/s) * Override with M203 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 } +#define DEFAULT_MAX_FEEDRATE { 300, 300, 10, 50 } //#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 #if ENABLED(LIMITED_MAX_FR_EDITING) @@ -841,9 +856,9 @@ * M204 R Retract Acceleration * M204 T Travel Acceleration */ -#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves +#define DEFAULT_ACCELERATION 2000 // X, Y, Z and E acceleration for printing moves +#define DEFAULT_RETRACT_ACCELERATION 1000 // E acceleration for retracts +#define DEFAULT_TRAVEL_ACCELERATION 2500 // X, Y, Z acceleration for travel (non printing) moves /** * Default Jerk limits (mm/s) @@ -877,7 +892,7 @@ * https://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html */ #if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.013 // (mm) Distance from real junction edge + #define JUNCTION_DEVIATION_MM 0.04 // (mm) Distance from real junction edge #define JD_HANDLE_SMALL_SEGMENTS // Use curvature estimation instead of just the junction angle // for small segments (< 1mm) with large junction angles (> 135°). #endif @@ -890,7 +905,7 @@ * * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained */ -//#define S_CURVE_ACCELERATION +#define S_CURVE_ACCELERATION //=========================================================================== //============================= Z Probe Options ============================= @@ -906,7 +921,9 @@ * The probe replaces the Z-MIN endstop and is used for Z homing. * (Automatically enables USE_PROBE_FOR_Z_HOMING.) */ -#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN +#if ENABLED(SPRO_BLTOUCH) + #define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN +#endif // Force the use of the probe for Z-axis homing //#define USE_PROBE_FOR_Z_HOMING @@ -963,7 +980,9 @@ /** * The BLTouch probe uses a Hall effect sensor and emulates a servo. */ -//#define BLTOUCH +#if ENABLED(SPRO_BLTOUCH) + #define BLTOUCH +#endif /** * Touch-MI Probe by hotends.fr @@ -1055,7 +1074,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +#define NOZZLE_TO_PROBE_OFFSET { 0, -42, 0 } // Most probes should stay away from the edges of the bed, but // with NOZZLE_AS_PROBE this can be negative for a wider probing area. @@ -1106,7 +1125,7 @@ * A total of 2 does fast/slow probes with a weighted average. * A total of 3 or more adds more slow probes, taking the average. */ -//#define MULTIPLE_PROBING 2 +#define MULTIPLE_PROBING 2 //#define EXTRA_PROBING 1 /** @@ -1190,14 +1209,26 @@ // @section machine // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR false +#define INVERT_X_DIR true #define INVERT_Y_DIR true -#define INVERT_Z_DIR false +#if ENABLED(SPRO_TMC2209) + #define INVERT_Z_DIR true +#else + #define INVERT_Z_DIR false +#endif // @section extruder // For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR false +#ifdef SPRO_INVERTED_E + #if ENABLED(SPRO_TMC2209) + #define INVERT_E0_DIR true + #else + #define INVERT_E0_DIR false + #endif +#else + #define INVERT_E0_DIR true +#endif #define INVERT_E1_DIR false #define INVERT_E2_DIR false #define INVERT_E3_DIR false @@ -1218,7 +1249,7 @@ */ //#define Z_IDLE_HEIGHT Z_HOME_POS -//#define Z_HOMING_HEIGHT 4 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ... +#define Z_HOMING_HEIGHT 10 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ... // Be sure to have this much clearance over your Z_MAX_POS to prevent grinding. //#define Z_AFTER_HOMING 10 // (mm) Height to move to after homing Z @@ -1226,14 +1257,14 @@ // Direction of endstops when homing; 1=MAX, -1=MIN // :[-1,1] #define X_HOME_DIR -1 -#define Y_HOME_DIR -1 +#define Y_HOME_DIR 1 #define Z_HOME_DIR -1 // @section machine // The size of the printable area -#define X_BED_SIZE 200 -#define Y_BED_SIZE 200 +#define X_BED_SIZE 235 +#define Y_BED_SIZE 235 // Travel limits (mm) after homing, corresponding to endstop positions. #define X_MIN_POS 0 @@ -1241,7 +1272,7 @@ #define Z_MIN_POS 0 #define X_MAX_POS X_BED_SIZE #define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 200 +#define Z_MAX_POS 235 /** * Software Endstops @@ -1285,7 +1316,7 @@ * RAMPS-based boards use SERVO3_PIN for the first runout sensor. * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. */ -//#define FILAMENT_RUNOUT_SENSOR +#define FILAMENT_RUNOUT_SENSOR #if ENABLED(FILAMENT_RUNOUT_SENSOR) #define FIL_RUNOUT_ENABLED_DEFAULT true // Enable the sensor on startup. Override with M412 followed by M500. #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. @@ -1387,16 +1418,19 @@ */ //#define AUTO_BED_LEVELING_3POINT //#define AUTO_BED_LEVELING_LINEAR -//#define AUTO_BED_LEVELING_BILINEAR //#define AUTO_BED_LEVELING_UBL -//#define MESH_BED_LEVELING +#if ENABLED(SPRO_BLTOUCH) + #define AUTO_BED_LEVELING_BILINEAR +#else + #define MESH_BED_LEVELING +#endif /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable * leveling immediately after G28. */ -//#define RESTORE_LEVELING_AFTER_G28 +#define RESTORE_LEVELING_AFTER_G28 //#define ENABLE_LEVELING_AFTER_G28 /** @@ -1464,13 +1498,13 @@ // Beyond the probed grid, continue the implied tilt? // Default is to maintain the height of the nearest edge. - //#define EXTRAPOLATE_BEYOND_GRID + #define EXTRAPOLATE_BEYOND_GRID // // Experimental Subdivision of the grid by Catmull-Rom method. // Synthesizes intermediate points to produce a more detailed mesh. // - //#define ABL_BILINEAR_SUBDIVISION + #define ABL_BILINEAR_SUBDIVISION #if ENABLED(ABL_BILINEAR_SUBDIVISION) // Number of subdivisions between probe points #define BILINEAR_SUBDIVISIONS 3 @@ -1518,22 +1552,22 @@ * Add a bed leveling sub-menu for ABL or MBL. * Include a guided procedure if manual probing is enabled. */ -//#define LCD_BED_LEVELING +#define LCD_BED_LEVELING #if ENABLED(LCD_BED_LEVELING) #define MESH_EDIT_Z_STEP 0.025 // (mm) Step size while manually probing Z axis. #define LCD_PROBE_Z_RANGE 4 // (mm) Z Range centered on Z_MIN_POS for LCD Z adjustment - //#define MESH_EDIT_MENU // Add a menu to edit mesh points + #define MESH_EDIT_MENU // Add a menu to edit mesh points #endif // Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS +#define LEVEL_BED_CORNERS #if ENABLED(LEVEL_BED_CORNERS) #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner + #define LEVEL_CENTER_TOO // Move to the center after the last corner //#define LEVEL_CORNERS_USE_PROBE #if ENABLED(LEVEL_CORNERS_USE_PROBE) #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 @@ -1587,7 +1621,9 @@ // - Move the Z probe (or nozzle) to a defined XY point before Z Homing. // - Prevent Z homing when the Z probe is outside bed area. // -//#define Z_SAFE_HOMING +#if ENABLED(SPRO_BLTOUCH) + #define Z_SAFE_HOMING +#endif #if ENABLED(Z_SAFE_HOMING) #define Z_SAFE_HOMING_X_POINT X_CENTER // X point for Z homing @@ -1672,7 +1708,7 @@ * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) */ -//#define EEPROM_SETTINGS // Persistent storage with M500 and M501 +#define EEPROM_SETTINGS // Persistent storage with M500 and M501 //#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. #define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load @@ -1706,14 +1742,14 @@ // Preheat Constants - Up to 5 are supported without changes // #define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 180 -#define PREHEAT_1_TEMP_BED 70 +#define PREHEAT_1_TEMP_HOTEND 200 +#define PREHEAT_1_TEMP_BED 65 #define PREHEAT_1_TEMP_CHAMBER 35 #define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 #define PREHEAT_2_LABEL "ABS" #define PREHEAT_2_TEMP_HOTEND 240 -#define PREHEAT_2_TEMP_BED 110 +#define PREHEAT_2_TEMP_BED 100 #define PREHEAT_2_TEMP_CHAMBER 35 #define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 @@ -1728,7 +1764,7 @@ * P1 Raise the nozzle always to Z-park height. * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. */ -//#define NOZZLE_PARK_FEATURE +#define NOZZLE_PARK_FEATURE #if ENABLED(NOZZLE_PARK_FEATURE) // Specify a park position as { X, Y, Z_raise } @@ -1845,7 +1881,7 @@ * * View the current statistics with M78. */ -//#define PRINTCOUNTER +#define PRINTCOUNTER #if ENABLED(PRINTCOUNTER) #define PRINTCOUNTER_SAVE_INTERVAL 60 // (minutes) EEPROM save interval during print #endif @@ -1936,7 +1972,7 @@ * SD Card support is disabled by default. If your controller has an SD slot, * you must uncomment the following option or it won't work. */ -//#define SDSUPPORT +#define SDSUPPORT /** * SD CARD: ENABLE CRC @@ -2006,7 +2042,7 @@ // // Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. // -//#define INDIVIDUAL_AXIS_HOMING_MENU +#define INDIVIDUAL_AXIS_HOMING_MENU // // SPEAKER/BUZZER @@ -2472,7 +2508,7 @@ // 480x320, 3.5", FSMC Display From MKS // Normally used in MKS Robin Nano V1.2 // -//#define MKS_ROBIN_TFT35 +#define MKS_ROBIN_TFT35 // // 480x272, 4.3", FSMC Display From MKS @@ -2544,7 +2580,7 @@ * root of your SD card, together with the compiled firmware. */ //#define TFT_CLASSIC_UI -//#define TFT_COLOR_UI +#define TFT_COLOR_UI //#define TFT_LVGL_UI #if ENABLED(TFT_LVGL_UI) @@ -2559,7 +2595,7 @@ * TFT_ROTATE_270, TFT_ROTATE_270_MIRROR_X, TFT_ROTATE_270_MIRROR_Y, * TFT_MIRROR_X, TFT_MIRROR_Y, TFT_NO_ROTATION */ -//#define TFT_ROTATION TFT_NO_ROTATION +#define TFT_ROTATION TFT_NO_ROTATION //============================================================================= //============================ Other Controllers ============================ @@ -2573,17 +2609,17 @@ // // Touch Screen Settings // -//#define TOUCH_SCREEN +#define TOUCH_SCREEN #if ENABLED(TOUCH_SCREEN) #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus #define TOUCH_SCREEN_CALIBRATION - //#define TOUCH_CALIBRATION_X 12316 - //#define TOUCH_CALIBRATION_Y -8981 - //#define TOUCH_OFFSET_X -43 - //#define TOUCH_OFFSET_Y 257 + #define TOUCH_CALIBRATION_X 17880 + #define TOUCH_CALIBRATION_Y -12234 + #define TOUCH_OFFSET_X -45 + #define TOUCH_OFFSET_Y 349 //#define TOUCH_ORIENTATION TOUCH_LANDSCAPE #if BOTH(TOUCH_SCREEN_CALIBRATION, EEPROM_SETTINGS) diff --git a/config/examples/Two Trees/Sapphire Pro/Configuration_adv.h b/config/examples/Two Trees/Sapphire Pro/Configuration_adv.h index 5335fa012a..7da5a5402b 100644 --- a/config/examples/Two Trees/Sapphire Pro/Configuration_adv.h +++ b/config/examples/Two Trees/Sapphire Pro/Configuration_adv.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Two Trees/Sapphire Pro" + /** * Configuration_adv.h * @@ -258,8 +260,8 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 20 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius + #define WATCH_TEMP_PERIOD 40 // Seconds + #define WATCH_TEMP_INCREASE 4 // Degrees Celsius #endif /** @@ -437,9 +439,9 @@ * Hotend Idle Timeout * Prevent filament in the nozzle from charring and causing a critical jam. */ -//#define HOTEND_IDLE_TIMEOUT +#define HOTEND_IDLE_TIMEOUT #if ENABLED(HOTEND_IDLE_TIMEOUT) - #define HOTEND_IDLE_TIMEOUT_SEC (5*60) // (seconds) Time without extruder movement to trigger protection + #define HOTEND_IDLE_TIMEOUT_SEC (15*60) // (seconds) Time without extruder movement to trigger protection #define HOTEND_IDLE_MIN_TRIGGER 180 // (°C) Minimum temperature to enable hotend protection #define HOTEND_IDLE_NOZZLE_TARGET 0 // (°C) Safe temperature for the nozzle after timeout #define HOTEND_IDLE_BED_TARGET 0 // (°C) Safe temperature for the bed after timeout @@ -540,7 +542,7 @@ * Multiple extruders can be assigned to the same pin in which case * the fan will turn on when any selected extruder is above the threshold. */ -#define E0_AUTO_FAN_PIN -1 +#define E0_AUTO_FAN_PIN PB0 #define E1_AUTO_FAN_PIN -1 #define E2_AUTO_FAN_PIN -1 #define E3_AUTO_FAN_PIN -1 @@ -741,7 +743,7 @@ //#define HOMING_BACKOFF_POST_MM { 2, 2, 2 } // (mm) Backoff from endstops after homing -//#define QUICK_HOME // If G28 contains XY do a diagonal move first +#define QUICK_HOME // If G28 contains XY do a diagonal move first //#define HOME_Y_BEFORE_X // If G28 contains XY home Y before X //#define HOME_Z_FIRST // Home Z first. Requires a Z-MIN endstop (not a probe). //#define CODEPENDENT_XY_HOMING // If X/Y can't home without homing Y/X first @@ -882,7 +884,7 @@ #if ENABLED(ASSISTED_TRAMMING) // Define positions for probe points. - #define TRAMMING_POINT_XY { { 20, 20 }, { 180, 20 }, { 180, 180 }, { 20, 180 } } + #define TRAMMING_POINT_XY { { 20, 15 }, { 200, 15 }, { 200, 175 }, { 20, 175 } } // Define position names for probe points. #define TRAMMING_POINT_NAME_1 "Front-Left" @@ -891,9 +893,9 @@ #define TRAMMING_POINT_NAME_4 "Back-Left" #define RESTORE_LEVELING_AFTER_G35 // Enable to restore leveling setup after operation - //#define REPORT_TRAMMING_MM // Report Z deviation (mm) for each point relative to the first + #define REPORT_TRAMMING_MM // Report Z deviation (mm) for each point relative to the first - //#define ASSISTED_TRAMMING_WIZARD // Add a Tramming Wizard to the LCD menu + #define ASSISTED_TRAMMING_WIZARD // Add a Tramming Wizard to the LCD menu //#define ASSISTED_TRAMMING_WAIT_POSITION { X_CENTER, Y_CENTER, 30 } // Move the nozzle out of the way for adjustment @@ -1135,7 +1137,7 @@ #if EITHER(IS_ULTIPANEL, EXTENSIBLE_UI) #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel - #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines + #define FINE_MANUAL_MOVE 0.001 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines #if IS_ULTIPANEL #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position" #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen @@ -1160,22 +1162,22 @@ // Add Probe Z Offset calibration to the Z Probe Offsets menu #if HAS_BED_PROBE - //#define PROBE_OFFSET_WIZARD + #define PROBE_OFFSET_WIZARD #if ENABLED(PROBE_OFFSET_WIZARD) // // Enable to init the Probe Z-Offset when starting the Wizard. // Use a height slightly above the estimated nozzle-to-probe Z offset. // For example, with an offset of -5, consider a starting height of -4. // - //#define PROBE_OFFSET_WIZARD_START_Z -4.0 + #define PROBE_OFFSET_WIZARD_START_Z -2.0 // Set a convenient position to do the calibration (probing point and nozzle/bed-distance) - //#define PROBE_OFFSET_WIZARD_XY_POS { X_CENTER, Y_CENTER } + #define PROBE_OFFSET_WIZARD_XY_POS XY_CENTER #endif #endif // Include a page of printer information in the LCD Main Menu - //#define LCD_INFO_MENU + #define LCD_INFO_MENU #if ENABLED(LCD_INFO_MENU) //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages #endif @@ -1315,7 +1317,7 @@ * an option on the LCD screen to continue the print from the last-known * point in the file. */ - //#define POWER_LOSS_RECOVERY + #define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) //#define BACKUP_POWER_SUPPLY // Backup power / UPS to move the steppers on power loss @@ -1512,7 +1514,7 @@ */ #if HAS_MARLINUI_U8GLIB // Show SD percentage next to the progress bar - //#define DOGM_SD_PERCENT + #define DOGM_SD_PERCENT // Save many cycles by drawing a hollow frame or no frame on the Info Screen //#define XYZ_NO_FRAME @@ -1790,7 +1792,7 @@ * * Warning: Does not respect endstops! */ -//#define BABYSTEPPING +#define BABYSTEPPING #if ENABLED(BABYSTEPPING) //#define INTEGRATED_BABYSTEPPING // EXPERIMENTAL integration of babystepping into the Stepper ISR //#define BABYSTEP_WITHOUT_HOMING @@ -1813,7 +1815,9 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 - //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping + #if ENABLED(SPRO_BLTOUCH) + #define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping + #endif #if ENABLED(BABYSTEP_ZPROBE_OFFSET) //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor @@ -2311,7 +2315,7 @@ * * Enable PARK_HEAD_ON_PAUSE to add the G-code M125 Pause and Park. */ -//#define ADVANCED_PAUSE_FEATURE +#define ADVANCED_PAUSE_FEATURE #if ENABLED(ADVANCED_PAUSE_FEATURE) #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. @@ -2349,10 +2353,10 @@ #define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed. #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change. - //#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. + #define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. //#define HOME_BEFORE_FILAMENT_CHANGE // If needed, home before parking for filament change - //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. + #define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) #endif @@ -2719,7 +2723,7 @@ * Define your own with: * { , , hysteresis_start[1..8] } */ - #define CHOPPER_TIMING CHOPPER_DEFAULT_12V // All axes (override below) + #define CHOPPER_TIMING CHOPPER_DEFAULT_24V // All axes (override below) //#define CHOPPER_TIMING_X CHOPPER_TIMING // For X Axes (override below) //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X //#define CHOPPER_TIMING_Y CHOPPER_TIMING // For Y Axes (override below) @@ -2763,7 +2767,7 @@ * STEALTHCHOP_(XY|Z|E) must be enabled to use HYBRID_THRESHOLD. * M913 X/Y/Z/E to live tune the setting */ - //#define HYBRID_THRESHOLD + #define HYBRID_THRESHOLD #define X_HYBRID_THRESHOLD 100 // [mm/s] #define X2_HYBRID_THRESHOLD 100 @@ -2773,7 +2777,7 @@ #define Z2_HYBRID_THRESHOLD 3 #define Z3_HYBRID_THRESHOLD 3 #define Z4_HYBRID_THRESHOLD 3 - #define E0_HYBRID_THRESHOLD 30 + #define E0_HYBRID_THRESHOLD 50 #define E1_HYBRID_THRESHOLD 30 #define E2_HYBRID_THRESHOLD 30 #define E3_HYBRID_THRESHOLD 30 diff --git a/config/examples/UltiMachine/Archim1/Configuration.h b/config/examples/UltiMachine/Archim1/Configuration.h index 78c2dc9160..e552beb485 100644 --- a/config/examples/UltiMachine/Archim1/Configuration.h +++ b/config/examples/UltiMachine/Archim1/Configuration.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "UltiMachine/Archim1" + /** * Configuration.h * @@ -102,7 +104,7 @@ * * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] */ -#define SERIAL_PORT 0 +#define SERIAL_PORT -1 /** * Select a secondary serial port on the board to use for communication with the host. @@ -134,7 +136,7 @@ // Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_RAMPS_14_EFB + #define MOTHERBOARD BOARD_ARCHIM1 #endif // Name displayed in the LCD "Ready" message and Info menu @@ -743,22 +745,22 @@ * TMC5130, TMC5130_STANDALONE, TMC5160, TMC5160_STANDALONE * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'L6474', 'POWERSTEP01', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2160', 'TMC2160_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC2209', 'TMC2209_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE', 'TMC5160', 'TMC5160_STANDALONE'] */ -#define X_DRIVER_TYPE A4988 -#define Y_DRIVER_TYPE A4988 -#define Z_DRIVER_TYPE A4988 -//#define X2_DRIVER_TYPE A4988 -//#define Y2_DRIVER_TYPE A4988 -//#define Z2_DRIVER_TYPE A4988 -//#define Z3_DRIVER_TYPE A4988 -//#define Z4_DRIVER_TYPE A4988 -#define E0_DRIVER_TYPE A4988 -//#define E1_DRIVER_TYPE A4988 -//#define E2_DRIVER_TYPE A4988 -//#define E3_DRIVER_TYPE A4988 -//#define E4_DRIVER_TYPE A4988 -//#define E5_DRIVER_TYPE A4988 -//#define E6_DRIVER_TYPE A4988 -//#define E7_DRIVER_TYPE A4988 +#define X_DRIVER_TYPE DRV8825 +#define Y_DRIVER_TYPE DRV8825 +#define Z_DRIVER_TYPE DRV8825 +#define X2_DRIVER_TYPE DRV8825 +#define Y2_DRIVER_TYPE DRV8825 +#define Z2_DRIVER_TYPE DRV8825 +//#define Z3_DRIVER_TYPE DRV8825 +//#define Z4_DRIVER_TYPE DRV8825 +#define E0_DRIVER_TYPE DRV8825 +#define E1_DRIVER_TYPE DRV8825 +#define E2_DRIVER_TYPE DRV8825 +#define E3_DRIVER_TYPE DRV8825 +//#define E4_DRIVER_TYPE DRV8825 +//#define E5_DRIVER_TYPE DRV8825 +//#define E6_DRIVER_TYPE DRV8825 +//#define E7_DRIVER_TYPE DRV8825 // Enable this feature if all enabled endstop pins are interrupt-capable. // This will remove the need to poll the interrupt pins, saving many CPU cycles. @@ -806,7 +808,7 @@ * Override with M92 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 500 } +#define DEFAULT_AXIS_STEPS_PER_UNIT { 200, 200, 800, 500 } /** * Default Max Feed Rate (mm/s) diff --git a/config/examples/UltiMachine/Archim1/Configuration_adv.h b/config/examples/UltiMachine/Archim1/Configuration_adv.h index 5335fa012a..fe5f736e93 100644 --- a/config/examples/UltiMachine/Archim1/Configuration_adv.h +++ b/config/examples/UltiMachine/Archim1/Configuration_adv.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "UltiMachine/Archim1" + /** * Configuration_adv.h * @@ -867,7 +869,7 @@ // On a 300mm bed a 5% grade would give a misalignment of ~1.5cm #define G34_MAX_GRADE 5 // (%) Maximum incline that G34 will handle - #define Z_STEPPER_ALIGN_ITERATIONS 5 // Number of iterations to apply during alignment + #define Z_STEPPER_ALIGN_ITERATIONS 3 // Number of iterations to apply during alignment #define Z_STEPPER_ALIGN_ACC 0.02 // Stop iterating early if the accuracy is better than this #define RESTORE_LEVELING_AFTER_G34 // Restore leveling after G34 is done? // After G34, re-home Z (G28 Z) or just calculate it from the last probe heights? @@ -1065,15 +1067,15 @@ * Custom Microstepping * Override as-needed for your setup. Up to 3 MS pins are supported. */ -//#define MICROSTEP1 LOW,LOW,LOW -//#define MICROSTEP2 HIGH,LOW,LOW -//#define MICROSTEP4 LOW,HIGH,LOW -//#define MICROSTEP8 HIGH,HIGH,LOW -//#define MICROSTEP16 LOW,LOW,HIGH -//#define MICROSTEP32 HIGH,LOW,HIGH +#define MICROSTEP1 LOW,LOW,LOW +#define MICROSTEP2 HIGH,LOW,LOW +#define MICROSTEP4 LOW,HIGH,LOW +#define MICROSTEP8 HIGH,HIGH,LOW +#define MICROSTEP16 LOW,LOW,HIGH +#define MICROSTEP32 HIGH,LOW,HIGH // Microstep settings (Requires a board with pins named X_MS1, X_MS2, etc.) -#define MICROSTEP_MODES { 16, 16, 16, 16, 16, 16 } // [1,2,4,8,16] +#define MICROSTEP_MODES { 32, 32, 32, 32, 32, 32 } // [1,2,4,8,16] /** * @section stepper motor current @@ -1095,7 +1097,7 @@ * M908 - BQ_ZUM_MEGA_3D, RAMBO, PRINTRBOARD_REVF, RIGIDBOARD_V2 & SCOOVO_X9H * M909, M910 & LCD - only PRINTRBOARD_REVF & RIGIDBOARD_V2 */ -//#define PWM_MOTOR_CURRENT { 1300, 1300, 1250 } // Values in milliamps +#define PWM_MOTOR_CURRENT { 1200, 1200, 1200 } // Values in milliamps //#define DIGIPOT_MOTOR_CURRENT { 135,135,135,135,135 } // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A) //#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis @@ -1274,7 +1276,7 @@ * * :['SPI_HALF_SPEED', 'SPI_QUARTER_SPEED', 'SPI_EIGHTH_SPEED'] */ - //#define SD_SPI_SPEED SPI_HALF_SPEED + #define SD_SPI_SPEED SPI_HALF_SPEED // The standard SD detect circuit reads LOW when media is inserted and HIGH when empty. // Enable this option and set to HIGH if your SD cards are incorrectly detected. diff --git a/config/examples/UltiMachine/Archim2/Configuration.h b/config/examples/UltiMachine/Archim2/Configuration.h index 78c2dc9160..73907a1300 100644 --- a/config/examples/UltiMachine/Archim2/Configuration.h +++ b/config/examples/UltiMachine/Archim2/Configuration.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "UltiMachine/Archim2" + /** * Configuration.h * @@ -134,7 +136,7 @@ // Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_RAMPS_14_EFB + #define MOTHERBOARD BOARD_ARCHIM2 #endif // Name displayed in the LCD "Ready" message and Info menu @@ -743,15 +745,15 @@ * TMC5130, TMC5130_STANDALONE, TMC5160, TMC5160_STANDALONE * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'L6474', 'POWERSTEP01', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2160', 'TMC2160_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC2209', 'TMC2209_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE', 'TMC5160', 'TMC5160_STANDALONE'] */ -#define X_DRIVER_TYPE A4988 -#define Y_DRIVER_TYPE A4988 -#define Z_DRIVER_TYPE A4988 +#define X_DRIVER_TYPE TMC2130 +#define Y_DRIVER_TYPE TMC2130 +#define Z_DRIVER_TYPE TMC2130 //#define X2_DRIVER_TYPE A4988 //#define Y2_DRIVER_TYPE A4988 //#define Z2_DRIVER_TYPE A4988 //#define Z3_DRIVER_TYPE A4988 //#define Z4_DRIVER_TYPE A4988 -#define E0_DRIVER_TYPE A4988 +#define E0_DRIVER_TYPE TMC2130 //#define E1_DRIVER_TYPE A4988 //#define E2_DRIVER_TYPE A4988 //#define E3_DRIVER_TYPE A4988 @@ -806,7 +808,7 @@ * Override with M92 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 500 } +#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 4000, 500 } /** * Default Max Feed Rate (mm/s) diff --git a/config/examples/UltiMachine/Archim2/Configuration_adv.h b/config/examples/UltiMachine/Archim2/Configuration_adv.h index 5335fa012a..817ac5a24e 100644 --- a/config/examples/UltiMachine/Archim2/Configuration_adv.h +++ b/config/examples/UltiMachine/Archim2/Configuration_adv.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "UltiMachine/Archim2" + /** * Configuration_adv.h * @@ -867,7 +869,7 @@ // On a 300mm bed a 5% grade would give a misalignment of ~1.5cm #define G34_MAX_GRADE 5 // (%) Maximum incline that G34 will handle - #define Z_STEPPER_ALIGN_ITERATIONS 5 // Number of iterations to apply during alignment + #define Z_STEPPER_ALIGN_ITERATIONS 3 // Number of iterations to apply during alignment #define Z_STEPPER_ALIGN_ACC 0.02 // Stop iterating early if the accuracy is better than this #define RESTORE_LEVELING_AFTER_G34 // Restore leveling after G34 is done? // After G34, re-home Z (G28 Z) or just calculate it from the last probe heights? @@ -1776,7 +1778,7 @@ * NOTE: This method is less reliable as it can only catch hangups while * interrupts are enabled. */ -#define USE_WATCHDOG +//#define USE_WATCHDOG #if ENABLED(USE_WATCHDOG) //#define WATCHDOG_RESET_MANUAL #endif @@ -2653,7 +2655,7 @@ * The default SW SPI pins are defined the respective pins files, * but you can override or define them here. */ - //#define TMC_USE_SW_SPI + #define TMC_USE_SW_SPI //#define TMC_SW_MOSI -1 //#define TMC_SW_MISO -1 //#define TMC_SW_SCK -1 diff --git a/config/examples/Ultimaker/Ultimaker Original (1.5.7)/Configuration.h b/config/examples/Ultimaker/Ultimaker Original (1.5.7)/Configuration.h index 78c2dc9160..f902dcfac6 100644 --- a/config/examples/Ultimaker/Ultimaker Original (1.5.7)/Configuration.h +++ b/config/examples/Ultimaker/Ultimaker Original (1.5.7)/Configuration.h @@ -1,6 +1,6 @@ /** * Marlin 3D Printer Firmware - * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * Copyright (c) 2021 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * * Based on Sprinter and grbl. * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Ultimaker/Ultimaker Original (1.5.7)" + /** * Configuration.h * @@ -134,7 +136,7 @@ // Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_RAMPS_14_EFB + #define MOTHERBOARD BOARD_ULTIMAKER #endif // Name displayed in the LCD "Ready" message and Info menu @@ -151,7 +153,7 @@ #define EXTRUDERS 1 // Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc. -#define DEFAULT_NOMINAL_FILAMENT_DIA 1.75 +#define DEFAULT_NOMINAL_FILAMENT_DIA 2.85 // For Cyclops or any "multi-extruder" that shares a single nozzle. //#define SINGLENOZZLE @@ -416,7 +418,7 @@ * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. */ -#define TEMP_SENSOR_0 1 +#define TEMP_SENSOR_0 -1 #define TEMP_SENSOR_1 0 #define TEMP_SENSOR_2 0 #define TEMP_SENSOR_3 0 @@ -686,9 +688,9 @@ #define USE_XMIN_PLUG #define USE_YMIN_PLUG #define USE_ZMIN_PLUG -//#define USE_XMAX_PLUG -//#define USE_YMAX_PLUG -//#define USE_ZMAX_PLUG +#define USE_XMAX_PLUG +#define USE_YMAX_PLUG +#define USE_ZMAX_PLUG // Enable pullup for all endstops to prevent a floating state #define ENDSTOPPULLUPS @@ -717,13 +719,13 @@ #endif // Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define X_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_PROBE_ENDSTOP_INVERTING false // Set to true to invert the logic of the probe. +#define X_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Y_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Z_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define X_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Y_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Z_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Z_MIN_PROBE_ENDSTOP_INVERTING true // Set to true to invert the logic of the probe. /** * Stepper Drivers @@ -806,7 +808,7 @@ * Override with M92 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 500 } +#define DEFAULT_AXIS_STEPS_PER_UNIT { 78.7402, 78.7402, 533.3333, 876.6687 } /** * Default Max Feed Rate (mm/s) @@ -940,7 +942,7 @@ * Use G29 repeatedly, adjusting the Z height at each point with movement commands * or (with LCD_BED_LEVELING) the LCD controller. */ -//#define PROBE_MANUALLY +#define PROBE_MANUALLY /** * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. @@ -1190,9 +1192,9 @@ // @section machine // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR false -#define INVERT_Y_DIR true -#define INVERT_Z_DIR false +#define INVERT_X_DIR true +#define INVERT_Y_DIR false +#define INVERT_Z_DIR true // @section extruder @@ -1232,8 +1234,8 @@ // @section machine // The size of the printable area -#define X_BED_SIZE 200 -#define Y_BED_SIZE 200 +#define X_BED_SIZE 205 +#define Y_BED_SIZE 208 // Travel limits (mm) after homing, corresponding to endstop positions. #define X_MIN_POS 0 @@ -1261,7 +1263,7 @@ #endif // Max software endstops constrain movement within maximum coordinate bounds -#define MAX_SOFTWARE_ENDSTOPS +//#define MAX_SOFTWARE_ENDSTOPS #if ENABLED(MAX_SOFTWARE_ENDSTOPS) #define MAX_SOFTWARE_ENDSTOP_X #define MAX_SOFTWARE_ENDSTOP_Y @@ -1672,7 +1674,7 @@ * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) */ -//#define EEPROM_SETTINGS // Persistent storage with M500 and M501 +#define EEPROM_SETTINGS // Persistent storage with M500 and M501 //#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. #define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load @@ -1936,7 +1938,7 @@ * SD Card support is disabled by default. If your controller has an SD slot, * you must uncomment the following option or it won't work. */ -//#define SDSUPPORT +#define SDSUPPORT /** * SD CARD: ENABLE CRC @@ -2006,7 +2008,7 @@ // // Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. // -//#define INDIVIDUAL_AXIS_HOMING_MENU +#define INDIVIDUAL_AXIS_HOMING_MENU // // SPEAKER/BUZZER @@ -2056,7 +2058,7 @@ // // ULTIMAKER Controller. // -//#define ULTIMAKERCONTROLLER +#define ULTIMAKERCONTROLLER // // ULTIPANEL as seen on Thingiverse. diff --git a/config/examples/Ultimaker/Ultimaker Original (1.5.7)/Configuration_adv.h b/config/examples/Ultimaker/Ultimaker Original (1.5.7)/Configuration_adv.h index 5335fa012a..5af3fae690 100644 --- a/config/examples/Ultimaker/Ultimaker Original (1.5.7)/Configuration_adv.h +++ b/config/examples/Ultimaker/Ultimaker Original (1.5.7)/Configuration_adv.h @@ -1,6 +1,6 @@ /** * Marlin 3D Printer Firmware - * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * Copyright (c) 2021 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * * Based on Sprinter and grbl. * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Ultimaker/Ultimaker Original (1.5.7)" + /** * Configuration_adv.h * @@ -1175,7 +1177,7 @@ #endif // Include a page of printer information in the LCD Main Menu - //#define LCD_INFO_MENU + #define LCD_INFO_MENU #if ENABLED(LCD_INFO_MENU) //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages #endif diff --git a/config/examples/VORONDesign/Configuration.h b/config/examples/VORONDesign/Configuration.h index 78c2dc9160..e8dda19ddf 100644 --- a/config/examples/VORONDesign/Configuration.h +++ b/config/examples/VORONDesign/Configuration.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "VORONDesign" + /** * Configuration.h * @@ -87,7 +89,7 @@ #define SHOW_BOOTSCREEN // Show the bitmap in Marlin/_Bootscreen.h on startup. -//#define SHOW_CUSTOM_BOOTSCREEN +#define SHOW_CUSTOM_BOOTSCREEN // Show the bitmap in Marlin/_Statusscreen.h on the status screen. //#define CUSTOM_STATUS_SCREEN_IMAGE @@ -127,18 +129,18 @@ * * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ -#define BAUDRATE 250000 +#define BAUDRATE 115200 // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH // Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_RAMPS_14_EFB + #define MOTHERBOARD BOARD_VORON #endif // Name displayed in the LCD "Ready" message and Info menu -//#define CUSTOM_MACHINE_NAME "3D Printer" +#define CUSTOM_MACHINE_NAME "VORON 2.0" // Printer's unique ID, used by some programs to differentiate between machines. // Choose your own or use a service like https://www.uuidgenerator.net/version4 @@ -148,7 +150,7 @@ // This defines the number of extruders // :[0, 1, 2, 3, 4, 5, 6, 7, 8] -#define EXTRUDERS 1 +#define EXTRUDERS 2 // Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc. #define DEFAULT_NOMINAL_FILAMENT_DIA 1.75 @@ -306,7 +308,7 @@ // Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing). // The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder). // For the other hotends it is their distance from the extruder 0 hotend. -//#define HOTEND_OFFSET_X { 0.0, 20.00 } // (mm) relative X-offset for each nozzle +#define HOTEND_OFFSET_X { 0.0, -18.00 } // (mm) relative X-offset for each nozzle //#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle //#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle @@ -416,15 +418,15 @@ * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. */ -#define TEMP_SENSOR_0 1 -#define TEMP_SENSOR_1 0 +#define TEMP_SENSOR_0 5 +#define TEMP_SENSOR_1 5 #define TEMP_SENSOR_2 0 #define TEMP_SENSOR_3 0 #define TEMP_SENSOR_4 0 #define TEMP_SENSOR_5 0 #define TEMP_SENSOR_6 0 #define TEMP_SENSOR_7 0 -#define TEMP_SENSOR_BED 0 +#define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 #define TEMP_SENSOR_COOLER 0 @@ -510,16 +512,17 @@ //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) // Set/get with gcode: M301 E[extruder number, 0-2] + // From VORON #if ENABLED(PID_PARAMS_PER_HOTEND) // Specify between 1 and HOTENDS values per array. // If fewer than EXTRUDER values are provided, the last element will be repeated. - #define DEFAULT_Kp_LIST { 22.20, 22.20 } - #define DEFAULT_Ki_LIST { 1.08, 1.08 } - #define DEFAULT_Kd_LIST { 114.00, 114.00 } + #define DEFAULT_Kp_LIST { 23.72, 23.72 } + #define DEFAULT_Ki_LIST { 1.56, 1.56 } + #define DEFAULT_Kd_LIST { 90.34, 90.34 } #else - #define DEFAULT_Kp 22.20 - #define DEFAULT_Ki 1.08 - #define DEFAULT_Kd 114.00 + #define DEFAULT_Kp 23.72 + #define DEFAULT_Ki 1.56 + #define DEFAULT_Kd 90.34 #endif #endif // PIDTEMP @@ -550,17 +553,16 @@ * When set to any value below 255, enables a form of PWM to the bed that acts like a divider * so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED) */ -#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current +#define MAX_BED_POWER 205 // limits duty cycle to bed; 255=full current #if ENABLED(PIDTEMPBED) //#define MIN_BED_POWER 0 //#define PID_BED_DEBUG // Sends debug data to the serial port. - // 120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - // from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) - #define DEFAULT_bedKp 10.00 - #define DEFAULT_bedKi .023 - #define DEFAULT_bedKd 305.4 + // Results from VORON + #define DEFAULT_bedKp 150.52 + #define DEFAULT_bedKi 12.25 + #define DEFAULT_bedKd 462.40 // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. #endif // PIDTEMPBED @@ -666,7 +668,7 @@ // Enable one of the options below for CoreXY, CoreXZ, or CoreYZ kinematics, // either in the usual order or reversed -//#define COREXY +#define COREXY //#define COREXZ //#define COREYZ //#define COREYX @@ -694,13 +696,13 @@ #define ENDSTOPPULLUPS #if DISABLED(ENDSTOPPULLUPS) // Disable ENDSTOPPULLUPS to set pullups individually - //#define ENDSTOPPULLUP_XMAX - //#define ENDSTOPPULLUP_YMAX - //#define ENDSTOPPULLUP_ZMAX - //#define ENDSTOPPULLUP_XMIN - //#define ENDSTOPPULLUP_YMIN - //#define ENDSTOPPULLUP_ZMIN - //#define ENDSTOPPULLUP_ZMIN_PROBE + #define ENDSTOPPULLUP_XMAX + #define ENDSTOPPULLUP_YMAX + #define ENDSTOPPULLUP_ZMAX + #define ENDSTOPPULLUP_XMIN + #define ENDSTOPPULLUP_YMIN + #define ENDSTOPPULLUP_ZMIN + #define ENDSTOPPULLUP_ZMIN_PROBE #endif // Enable pulldown for all endstops to prevent a floating state @@ -719,11 +721,11 @@ // Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). #define X_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. #define Y_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. +#define Z_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. #define X_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. #define Y_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. #define Z_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_PROBE_ENDSTOP_INVERTING false // Set to true to invert the logic of the probe. +#define Z_MIN_PROBE_ENDSTOP_INVERTING true // Set to true to invert the logic of the probe. /** * Stepper Drivers @@ -743,16 +745,16 @@ * TMC5130, TMC5130_STANDALONE, TMC5160, TMC5160_STANDALONE * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'L6474', 'POWERSTEP01', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2160', 'TMC2160_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC2209', 'TMC2209_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE', 'TMC5160', 'TMC5160_STANDALONE'] */ -#define X_DRIVER_TYPE A4988 -#define Y_DRIVER_TYPE A4988 -#define Z_DRIVER_TYPE A4988 +#define X_DRIVER_TYPE DRV8825 +#define Y_DRIVER_TYPE DRV8825 +#define Z_DRIVER_TYPE DRV8825 //#define X2_DRIVER_TYPE A4988 //#define Y2_DRIVER_TYPE A4988 //#define Z2_DRIVER_TYPE A4988 //#define Z3_DRIVER_TYPE A4988 //#define Z4_DRIVER_TYPE A4988 -#define E0_DRIVER_TYPE A4988 -//#define E1_DRIVER_TYPE A4988 +#define E0_DRIVER_TYPE DRV8825 +#define E1_DRIVER_TYPE DRV8825 //#define E2_DRIVER_TYPE A4988 //#define E3_DRIVER_TYPE A4988 //#define E4_DRIVER_TYPE A4988 @@ -799,21 +801,21 @@ * following movement settings. If fewer factors are given than the * total number of extruders, the last value applies to the rest. */ -//#define DISTINCT_E_FACTORS +#define DISTINCT_E_FACTORS /** * Default Axis Steps Per Unit (steps/mm) * Override with M92 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 500 } +#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 608, 608 } /** * Default Max Feed Rate (mm/s) * Override with M203 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 } +#define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 75, 75 } //#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 #if ENABLED(LIMITED_MAX_FR_EDITING) @@ -826,7 +828,7 @@ * Override with M201 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 } +#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 , 10000 } //#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 #if ENABLED(LIMITED_MAX_ACCEL_EDITING) @@ -855,9 +857,9 @@ */ //#define CLASSIC_JERK #if ENABLED(CLASSIC_JERK) - #define DEFAULT_XJERK 10.0 - #define DEFAULT_YJERK 10.0 - #define DEFAULT_ZJERK 0.3 + #define DEFAULT_XJERK 20.0 + #define DEFAULT_YJERK 15.0 + #define DEFAULT_ZJERK 0.4 //#define TRAVEL_EXTRA_XYJERK 0.0 // Additional jerk allowance for all travel moves @@ -877,7 +879,7 @@ * https://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html */ #if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.013 // (mm) Distance from real junction edge + #define JUNCTION_DEVIATION_MM 0.03 // (mm) Distance from real junction edge #define JD_HANDLE_SMALL_SEGMENTS // Use curvature estimation instead of just the junction angle // for small segments (< 1mm) with large junction angles (> 135°). #endif @@ -946,7 +948,7 @@ * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. * (e.g., an inductive probe or a nozzle-based probe-switch.) */ -//#define FIX_MOUNTED_PROBE +#define FIX_MOUNTED_PROBE /** * Use the nozzle as the probe, as with a conductive @@ -1055,7 +1057,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +#define NOZZLE_TO_PROBE_OFFSET { 0, 0, 0 } // Most probes should stay away from the edges of the bed, but // with NOZZLE_AS_PROBE this can be negative for a wider probing area. @@ -1123,8 +1125,8 @@ * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. */ -#define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow -#define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points +#define Z_CLEARANCE_DEPLOY_PROBE 0 // Z Clearance for Deploy/Stow +#define Z_CLEARANCE_BETWEEN_PROBES 3 // Z Clearance between probe points #define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes //#define Z_AFTER_PROBING 5 // Z position after probing is done @@ -1135,7 +1137,7 @@ #define Z_PROBE_OFFSET_RANGE_MAX 20 // Enable the M48 repeatability test to test probe accuracy -//#define Z_MIN_PROBE_REPEATABILITY_TEST +#define Z_MIN_PROBE_REPEATABILITY_TEST // Before deploy/stow pause for user confirmation //#define PAUSE_BEFORE_DEPLOY_STOW @@ -1191,7 +1193,7 @@ // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR false -#define INVERT_Y_DIR true +#define INVERT_Y_DIR false #define INVERT_Z_DIR false // @section extruder @@ -1232,8 +1234,8 @@ // @section machine // The size of the printable area -#define X_BED_SIZE 200 -#define Y_BED_SIZE 200 +#define X_BED_SIZE 230 +#define Y_BED_SIZE 230 // Travel limits (mm) after homing, corresponding to endstop positions. #define X_MIN_POS 0 @@ -1241,7 +1243,7 @@ #define Z_MIN_POS 0 #define X_MAX_POS X_BED_SIZE #define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 200 +#define Z_MAX_POS 230 /** * Software Endstops @@ -1388,7 +1390,7 @@ //#define AUTO_BED_LEVELING_3POINT //#define AUTO_BED_LEVELING_LINEAR //#define AUTO_BED_LEVELING_BILINEAR -//#define AUTO_BED_LEVELING_UBL +#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING /** @@ -1396,7 +1398,7 @@ * these options to restore the prior leveling state or to always enable * leveling immediately after G28. */ -//#define RESTORE_LEVELING_AFTER_G28 +#define RESTORE_LEVELING_AFTER_G28 //#define ENABLE_LEVELING_AFTER_G28 /** @@ -1438,12 +1440,12 @@ /** * Enable the G26 Mesh Validation Pattern tool. */ - //#define G26_MESH_VALIDATION + #define G26_MESH_VALIDATION #if ENABLED(G26_MESH_VALIDATION) #define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle. #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for G26. - #define MESH_TEST_HOTEND_TEMP 205 // (°C) Default nozzle temperature for G26. - #define MESH_TEST_BED_TEMP 60 // (°C) Default bed temperature for G26. + #define MESH_TEST_HOTEND_TEMP 200 // (°C) Default nozzle temperature for G26. + #define MESH_TEST_BED_TEMP 100 // (°C) Defaultbed temperature for G26. #define G26_XY_FEEDRATE 20 // (mm/s) Feedrate for G26 XY moves. #define G26_XY_FEEDRATE_TRAVEL 100 // (mm/s) Feedrate for G26 XY travel moves. #define G26_RETRACT_MULTIPLIER 1.0 // G26 Q (retraction) used by default between mesh test elements. @@ -1486,8 +1488,8 @@ //#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh - #define MESH_INSET 1 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. + #define MESH_INSET 15 // Set Mesh bounds as an inset region of the bed + #define GRID_MAX_POINTS_X 12 // Don't use more than 15 points per axis, implementation limited. #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X //#define UBL_HILBERT_CURVE // Use Hilbert distribution for less travel when probing multiple points @@ -1527,7 +1529,7 @@ #endif // Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS +#define LEVEL_BED_CORNERS #if ENABLED(LEVEL_BED_CORNERS) #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets @@ -1587,7 +1589,7 @@ // - Move the Z probe (or nozzle) to a defined XY point before Z Homing. // - Prevent Z homing when the Z probe is outside bed area. // -//#define Z_SAFE_HOMING +#define Z_SAFE_HOMING #if ENABLED(Z_SAFE_HOMING) #define Z_SAFE_HOMING_X_POINT X_CENTER // X point for Z homing @@ -1672,7 +1674,7 @@ * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) */ -//#define EEPROM_SETTINGS // Persistent storage with M500 and M501 +#define EEPROM_SETTINGS // Persistent storage with M500 and M501 //#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. #define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load @@ -1936,14 +1938,14 @@ * SD Card support is disabled by default. If your controller has an SD slot, * you must uncomment the following option or it won't work. */ -//#define SDSUPPORT +#define SDSUPPORT /** * SD CARD: ENABLE CRC * * Use CRC checks and retries on the SD communication. */ -//#define SD_CHECK_AND_RETRY +#define SD_CHECK_AND_RETRY /** * LCD Menu Items @@ -1960,13 +1962,13 @@ // This option overrides the default number of encoder pulses needed to // produce one step. Should be increased for high-resolution encoders. // -//#define ENCODER_PULSES_PER_STEP 4 +#define ENCODER_PULSES_PER_STEP 2 // // Use this option to override the number of step signals required to // move between next/prev menu items. // -//#define ENCODER_STEPS_PER_MENU_ITEM 1 +#define ENCODER_STEPS_PER_MENU_ITEM 1 /** * Encoder Direction Options @@ -2195,7 +2197,7 @@ // RepRapDiscount FULL GRAPHIC Smart Controller // https://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller // -//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER +#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER // // K.3D Full Graphic Smart Controller diff --git a/config/examples/VORONDesign/Configuration_adv.h b/config/examples/VORONDesign/Configuration_adv.h index 5335fa012a..252c65a180 100644 --- a/config/examples/VORONDesign/Configuration_adv.h +++ b/config/examples/VORONDesign/Configuration_adv.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "VORONDesign" + /** * Configuration_adv.h * @@ -540,8 +542,8 @@ * Multiple extruders can be assigned to the same pin in which case * the fan will turn on when any selected extruder is above the threshold. */ -#define E0_AUTO_FAN_PIN -1 -#define E1_AUTO_FAN_PIN -1 +//#define E0_AUTO_FAN_PIN -1 +//#define E1_AUTO_FAN_PIN -1 #define E2_AUTO_FAN_PIN -1 #define E3_AUTO_FAN_PIN -1 #define E4_AUTO_FAN_PIN -1 @@ -867,7 +869,7 @@ // On a 300mm bed a 5% grade would give a misalignment of ~1.5cm #define G34_MAX_GRADE 5 // (%) Maximum incline that G34 will handle - #define Z_STEPPER_ALIGN_ITERATIONS 5 // Number of iterations to apply during alignment + #define Z_STEPPER_ALIGN_ITERATIONS 3 // Number of iterations to apply during alignment #define Z_STEPPER_ALIGN_ACC 0.02 // Stop iterating early if the accuracy is better than this #define RESTORE_LEVELING_AFTER_G34 // Restore leveling after G34 is done? // After G34, re-home Z (G28 Z) or just calculate it from the last probe heights? diff --git a/config/examples/Velleman/K8200/Configuration.h b/config/examples/Velleman/K8200/Configuration.h index 78c2dc9160..0e4b1d4cd4 100644 --- a/config/examples/Velleman/K8200/Configuration.h +++ b/config/examples/Velleman/K8200/Configuration.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Velleman/K8200" + /** * Configuration.h * @@ -37,6 +39,22 @@ */ #define CONFIGURATION_H_VERSION 02000801 +/** + * Sample configuration file for Vellemann K8200 + * tested on K8200 with VM8201 (Display) + * and Arduino 1.6.12 (Mac OS X) by @CONSULitAS, 2016-11-18 + * https://github.com/CONSULitAS/Marlin-K8200/archive/K8200_stable_2016-11-18.zip + * + * Please choose your hardware options for the K8200: + */ + +// VM8201 Display unit +#define K8200_VM8201 +// K8204 Z axis upgrade rod and coupler -> TODO +//#define K8200_K8204 +// K8203 direct drive extruder -> TODO +//#define K8200_K8203 + //=========================================================================== //============================= Getting Started ============================= //=========================================================================== @@ -69,7 +87,7 @@ // @section info // Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes. +#define STRING_CONFIG_H_AUTHOR "(K8200, @CONSULitAS)" // Who made the changes. //#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) /** @@ -134,15 +152,19 @@ // Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_RAMPS_14_EFB + #define MOTHERBOARD BOARD_K8200 #endif // Name displayed in the LCD "Ready" message and Info menu -//#define CUSTOM_MACHINE_NAME "3D Printer" +#define CUSTOM_MACHINE_NAME "K8200" // Printer's unique ID, used by some programs to differentiate between machines. // Choose your own or use a service like https://www.uuidgenerator.net/version4 -//#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" +#if ENABLED(K8200_VM8201) + #define MACHINE_UUID "2b7dea3b-844e-4ab1-aa96-bb6406607d6e" // K8200 standard config with VM8201 (Display) +#else + #define MACHINE_UUID "92f72de1-c211-452e-9f2b-61ef88a4751e" // K8200 standard config without VM8201 (Display) +#endif // @section extruder @@ -151,7 +173,7 @@ #define EXTRUDERS 1 // Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc. -#define DEFAULT_NOMINAL_FILAMENT_DIA 1.75 +#define DEFAULT_NOMINAL_FILAMENT_DIA 3.0 // For Cyclops or any "multi-extruder" that shares a single nozzle. //#define SINGLENOZZLE @@ -416,7 +438,7 @@ * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. */ -#define TEMP_SENSOR_0 1 +#define TEMP_SENSOR_0 5 #define TEMP_SENSOR_1 0 #define TEMP_SENSOR_2 0 #define TEMP_SENSOR_3 0 @@ -424,7 +446,7 @@ #define TEMP_SENSOR_5 0 #define TEMP_SENSOR_6 0 #define TEMP_SENSOR_7 0 -#define TEMP_SENSOR_BED 0 +#define TEMP_SENSOR_BED 5 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 #define TEMP_SENSOR_COOLER 0 @@ -510,16 +532,17 @@ //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) // Set/get with gcode: M301 E[extruder number, 0-2] + // Vellemann K8200 Extruder - calculated with PID Autotune and tested #if ENABLED(PID_PARAMS_PER_HOTEND) // Specify between 1 and HOTENDS values per array. // If fewer than EXTRUDER values are provided, the last element will be repeated. - #define DEFAULT_Kp_LIST { 22.20, 22.20 } - #define DEFAULT_Ki_LIST { 1.08, 1.08 } - #define DEFAULT_Kd_LIST { 114.00, 114.00 } + #define DEFAULT_Kp_LIST { 24.29, 24.29 } + #define DEFAULT_Ki_LIST { 1.58, 1.58 } + #define DEFAULT_Kd_LIST { 93.51, 93.51 } #else - #define DEFAULT_Kp 22.20 - #define DEFAULT_Ki 1.08 - #define DEFAULT_Kd 114.00 + #define DEFAULT_Kp 24.29 + #define DEFAULT_Ki 1.58 + #define DEFAULT_Kd 93.51 #endif #endif // PIDTEMP @@ -540,7 +563,7 @@ * heater. If your configuration is significantly different than this and you don't understand * the issues involved, don't use bed PID until someone else verifies that your hardware works. */ -//#define PIDTEMPBED +#define PIDTEMPBED //#define BED_LIMIT_SWITCHING @@ -556,11 +579,11 @@ //#define MIN_BED_POWER 0 //#define PID_BED_DEBUG // Sends debug data to the serial port. - // 120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - // from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) - #define DEFAULT_bedKp 10.00 - #define DEFAULT_bedKi .023 - #define DEFAULT_bedKd 305.4 + // Vellemann K8200 PCB heatbed with standard PCU at 60 degreesC - calculated with PID Autotune and tested + // from pidautotune + #define DEFAULT_bedKp 341.88 + #define DEFAULT_bedKi 25.32 + #define DEFAULT_bedKd 1153.89 // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. #endif // PIDTEMPBED @@ -697,9 +720,9 @@ //#define ENDSTOPPULLUP_XMAX //#define ENDSTOPPULLUP_YMAX //#define ENDSTOPPULLUP_ZMAX - //#define ENDSTOPPULLUP_XMIN - //#define ENDSTOPPULLUP_YMIN - //#define ENDSTOPPULLUP_ZMIN + #define ENDSTOPPULLUP_XMIN + #define ENDSTOPPULLUP_YMIN + #define ENDSTOPPULLUP_ZMIN //#define ENDSTOPPULLUP_ZMIN_PROBE #endif @@ -806,14 +829,13 @@ * Override with M92 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 500 } - +#define DEFAULT_AXIS_STEPS_PER_UNIT { 64.25, 64.25, 2560, 600 } /** * Default Max Feed Rate (mm/s) * Override with M203 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 } +#define DEFAULT_MAX_FEEDRATE { 500, 500, 5, 25 } //#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 #if ENABLED(LIMITED_MAX_FR_EDITING) @@ -826,7 +848,7 @@ * Override with M201 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 } +#define DEFAULT_MAX_ACCELERATION { 9000, 9000, 100, 10000 } //#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 #if ENABLED(LIMITED_MAX_ACCEL_EDITING) @@ -841,9 +863,9 @@ * M204 R Retract Acceleration * M204 T Travel Acceleration */ -#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves +#define DEFAULT_ACCELERATION 1000 // X, Y, Z and E acceleration for printing moves +#define DEFAULT_RETRACT_ACCELERATION 1000 // E acceleration for retracts +#define DEFAULT_TRAVEL_ACCELERATION 1000 // X, Y, Z acceleration for travel (non printing) moves /** * Default Jerk limits (mm/s) @@ -877,7 +899,7 @@ * https://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html */ #if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.013 // (mm) Distance from real junction edge + #define JUNCTION_DEVIATION_MM 0.04 // (mm) Distance from real junction edge #define JD_HANDLE_SMALL_SEGMENTS // Use curvature estimation instead of just the junction angle // for small segments (< 1mm) with large junction angles (> 135°). #endif @@ -1191,20 +1213,20 @@ // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR false -#define INVERT_Y_DIR true +#define INVERT_Y_DIR false // K8200: false #define INVERT_Z_DIR false // @section extruder // For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR false -#define INVERT_E1_DIR false -#define INVERT_E2_DIR false -#define INVERT_E3_DIR false -#define INVERT_E4_DIR false -#define INVERT_E5_DIR false -#define INVERT_E6_DIR false -#define INVERT_E7_DIR false +#define INVERT_E0_DIR true // K8200: true for geared default extruder! +#define INVERT_E1_DIR true +#define INVERT_E2_DIR true +#define INVERT_E3_DIR true +#define INVERT_E4_DIR true +#define INVERT_E5_DIR true +#define INVERT_E6_DIR true +#define INVERT_E7_DIR true // @section homing @@ -1218,7 +1240,8 @@ */ //#define Z_IDLE_HEIGHT Z_HOME_POS -//#define Z_HOMING_HEIGHT 4 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ... +// K8200: it is usual to have clamps for the glass plate on the heatbed +#define Z_HOMING_HEIGHT 4 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ... // Be sure to have this much clearance over your Z_MAX_POS to prevent grinding. //#define Z_AFTER_HOMING 10 // (mm) Height to move to after homing Z @@ -1672,7 +1695,7 @@ * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) */ -//#define EEPROM_SETTINGS // Persistent storage with M500 and M501 +#define EEPROM_SETTINGS // Persistent storage with M500 and M501 //#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. #define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load @@ -1707,13 +1730,13 @@ // #define PREHEAT_1_LABEL "PLA" #define PREHEAT_1_TEMP_HOTEND 180 -#define PREHEAT_1_TEMP_BED 70 +#define PREHEAT_1_TEMP_BED 50 // K8200: PLA / set back to 70 if you have an upgraded heatbed power supply #define PREHEAT_1_TEMP_CHAMBER 35 #define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 #define PREHEAT_2_LABEL "ABS" #define PREHEAT_2_TEMP_HOTEND 240 -#define PREHEAT_2_TEMP_BED 110 +#define PREHEAT_2_TEMP_BED 60 // K8200: ABS / set back to 110 if you have an upgraded heatbed power supply #define PREHEAT_2_TEMP_CHAMBER 35 #define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 @@ -1845,7 +1868,7 @@ * * View the current statistics with M78. */ -//#define PRINTCOUNTER +#define PRINTCOUNTER #if ENABLED(PRINTCOUNTER) #define PRINTCOUNTER_SAVE_INTERVAL 60 // (minutes) EEPROM save interval during print #endif @@ -1887,6 +1910,9 @@ // @section lcd +// K8200: for Display VM8201 with SD slot +#if ENABLED(K8200_VM8201) + /** * LCD LANGUAGE * @@ -1921,7 +1947,7 @@ * * :['JAPANESE', 'WESTERN', 'CYRILLIC'] */ -#define DISPLAY_CHARSET_HD44780 JAPANESE +#define DISPLAY_CHARSET_HD44780 JAPANESE // K8200: for Display VM8201 // this is the most common hardware /** * Info Screen Style (0:Classic, 1:Průša) @@ -1936,14 +1962,14 @@ * SD Card support is disabled by default. If your controller has an SD slot, * you must uncomment the following option or it won't work. */ -//#define SDSUPPORT +#define SDSUPPORT /** * SD CARD: ENABLE CRC * * Use CRC checks and retries on the SD communication. */ -//#define SD_CHECK_AND_RETRY +#define SD_CHECK_AND_RETRY /** * LCD Menu Items @@ -1960,13 +1986,13 @@ // This option overrides the default number of encoder pulses needed to // produce one step. Should be increased for high-resolution encoders. // -//#define ENCODER_PULSES_PER_STEP 4 +#define ENCODER_PULSES_PER_STEP 4 // K8200_VM8201: four steps per encoder step // // Use this option to override the number of step signals required to // move between next/prev menu items. // -//#define ENCODER_STEPS_PER_MENU_ITEM 1 +#define ENCODER_STEPS_PER_MENU_ITEM 1 // K8200_VM8201: One step per menu item /** * Encoder Direction Options @@ -1991,7 +2017,7 @@ // If CLOCKWISE normally moves DOWN this makes it go UP. // If CLOCKWISE normally moves UP this makes it go DOWN. // -//#define REVERSE_MENU_DIRECTION +#define REVERSE_MENU_DIRECTION // K8200: for Display VM8201 encoder on right side // // This option reverses the encoder direction for Select Screen. @@ -2006,7 +2032,7 @@ // // Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. // -//#define INDIVIDUAL_AXIS_HOMING_MENU +#define INDIVIDUAL_AXIS_HOMING_MENU // // SPEAKER/BUZZER @@ -2056,7 +2082,7 @@ // // ULTIMAKER Controller. // -//#define ULTIMAKERCONTROLLER +#define ULTIMAKERCONTROLLER // K8200: for Display VM8201 // // ULTIPANEL as seen on Thingiverse. @@ -2316,6 +2342,8 @@ // //#define SILVER_GATE_GLCD_CONTROLLER +#endif // K8200_VM8201 + //============================================================================= //============================== OLED Displays ============================== //============================================================================= diff --git a/config/examples/Velleman/K8200/Configuration_adv.h b/config/examples/Velleman/K8200/Configuration_adv.h index 5335fa012a..f987b35d62 100644 --- a/config/examples/Velleman/K8200/Configuration_adv.h +++ b/config/examples/Velleman/K8200/Configuration_adv.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Velleman/K8200" + /** * Configuration_adv.h * @@ -30,6 +32,15 @@ * * Basic settings can be found in Configuration.h */ + + /** + * Sample configuration file for Vellemann K8200 + * tested on K8200 with VM8201 (Display) + * and Arduino 1.6.12 (Mac) by @CONSULitAS, 2016-11-18 + * https://github.com/CONSULitAS/Marlin-K8200/archive/K8200_stable_2016-11-18.zip + * + */ + #define CONFIGURATION_ADV_H_VERSION 02000801 //=========================================================================== @@ -238,8 +249,9 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + // K8200 has weak heaters/power supply by default, so you have to relax! + #define THERMAL_PROTECTION_PERIOD 60 // Seconds + #define THERMAL_PROTECTION_HYSTERESIS 8 // Degrees Celsius //#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops #if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP) @@ -258,7 +270,8 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 20 // Seconds + // K8200 has weak heaters/power supply by default, so you have to relax! + #define WATCH_TEMP_PERIOD 30 // Seconds #define WATCH_TEMP_INCREASE 2 // Degrees Celsius #endif @@ -266,8 +279,10 @@ * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + // K8200 has weak heaters/power supply by default, so you have to relax! + // the default bed is so weak, that you can hardly go over 75°C + #define THERMAL_PROTECTION_BED_PERIOD 60 // Seconds + #define THERMAL_PROTECTION_BED_HYSTERESIS 10 // Degrees Celsius /** * As described above, except for the bed (M140/M190/M303). @@ -479,7 +494,7 @@ // When first starting the main fan, run it at full speed for the // given number of milliseconds. This gets the fan spinning reliably // before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) -//#define FAN_KICKSTART_TIME 100 +#define FAN_KICKSTART_TIME 500 // Some coolers may require a non-zero "off" state. //#define FAN_OFF_PWM 1 @@ -737,11 +752,11 @@ //#define SENSORLESS_BACKOFF_MM { 2, 2 } // (mm) Backoff from endstops before sensorless homing #define HOMING_BUMP_MM { 5, 5, 2 } // (mm) Backoff from endstops after first bump -#define HOMING_BUMP_DIVISOR { 2, 2, 4 } // Re-Bump Speed Divisor (Divides the Homing Feedrate) +#define HOMING_BUMP_DIVISOR { 4, 4, 8 } // Re-Bump Speed Divisor (Divides the Homing Feedrate) //#define HOMING_BACKOFF_POST_MM { 2, 2, 2 } // (mm) Backoff from endstops after homing -//#define QUICK_HOME // If G28 contains XY do a diagonal move first +#define QUICK_HOME // If G28 contains XY do a diagonal move first //#define HOME_Y_BEFORE_X // If G28 contains XY home Y before X //#define HOME_Z_FIRST // Home Z first. Requires a Z-MIN endstop (not a probe). //#define CODEPENDENT_XY_HOMING // If X/Y can't home without homing Y/X first @@ -867,7 +882,7 @@ // On a 300mm bed a 5% grade would give a misalignment of ~1.5cm #define G34_MAX_GRADE 5 // (%) Maximum incline that G34 will handle - #define Z_STEPPER_ALIGN_ITERATIONS 5 // Number of iterations to apply during alignment + #define Z_STEPPER_ALIGN_ITERATIONS 3 // Number of iterations to apply during alignment #define Z_STEPPER_ALIGN_ACC 0.02 // Stop iterating early if the accuracy is better than this #define RESTORE_LEVELING_AFTER_G34 // Restore leveling after G34 is done? // After G34, re-home Z (G28 Z) or just calculate it from the last probe heights? @@ -1253,7 +1268,7 @@ #endif #if EITHER(HAS_MARLINUI_HD44780, IS_TFTGLCD_PANEL) - //#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing + #define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing #if ENABLED(LCD_PROGRESS_BAR) #define PROGRESS_BAR_BAR_TIME 2000 // (ms) Amount of time to show the bar #define PROGRESS_BAR_MSG_TIME 3000 // (ms) Amount of time to show the status message @@ -1381,7 +1396,7 @@ //#define UTF_FILENAME_SUPPORT // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT + #define LONG_FILENAME_HOST_SUPPORT // Enable this option to scroll long filenames in the SD card menu //#define SCROLL_LONG_FILENAMES @@ -1790,7 +1805,7 @@ * * Warning: Does not respect endstops! */ -//#define BABYSTEPPING +#define BABYSTEPPING #if ENABLED(BABYSTEPPING) //#define INTEGRATED_BABYSTEPPING // EXPERIMENTAL integration of babystepping into the Stepper ISR //#define BABYSTEP_WITHOUT_HOMING @@ -2084,7 +2099,7 @@ #elif ENABLED(SDSUPPORT) #define BLOCK_BUFFER_SIZE 16 #else - #define BLOCK_BUFFER_SIZE 16 + #define BLOCK_BUFFER_SIZE 32 #endif // @section serial @@ -2100,7 +2115,7 @@ // For debug-echo: 128 bytes for the optimal speed. // Other output doesn't need to be that speedy. // :[0, 2, 4, 8, 16, 32, 64, 128, 256] -#define TX_BUFFER_SIZE 0 +#define TX_BUFFER_SIZE 128 // Host Receive Buffer Size // Without XON/XOFF flow control (see SERIAL_XON_XOFF below) 32 bytes should be enough. @@ -3562,12 +3577,12 @@ #define MAIN_MENU_ITEM_2_GCODE "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND) //#define MAIN_MENU_ITEM_2_CONFIRM - //#define MAIN_MENU_ITEM_3_DESC "Preheat for " PREHEAT_2_LABEL - //#define MAIN_MENU_ITEM_3_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) + #define MAIN_MENU_ITEM_3_DESC "Preheat for " PREHEAT_2_LABEL + #define MAIN_MENU_ITEM_3_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) //#define MAIN_MENU_ITEM_3_CONFIRM - //#define MAIN_MENU_ITEM_4_DESC "Heat Bed/Home/Level" - //#define MAIN_MENU_ITEM_4_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29" + #define MAIN_MENU_ITEM_4_DESC "Heat Bed/Home/Level" + #define MAIN_MENU_ITEM_4_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29" //#define MAIN_MENU_ITEM_4_CONFIRM //#define MAIN_MENU_ITEM_5_DESC "Home & Info" diff --git a/config/examples/Velleman/K8400/Dual-head/Configuration.h b/config/examples/Velleman/K8400/Dual-head/Configuration.h index 78c2dc9160..5c8dcaec00 100644 --- a/config/examples/Velleman/K8400/Dual-head/Configuration.h +++ b/config/examples/Velleman/K8400/Dual-head/Configuration.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Velleman/K8400/Dual-head" + /** * Configuration.h * @@ -69,7 +71,7 @@ // @section info // Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes. +#define STRING_CONFIG_H_AUTHOR "(Anthony Birkett, default config)" // Who made the changes. //#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) /** @@ -134,7 +136,7 @@ // Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_RAMPS_14_EFB + #define MOTHERBOARD BOARD_K8400 #endif // Name displayed in the LCD "Ready" message and Info menu @@ -148,7 +150,7 @@ // This defines the number of extruders // :[0, 1, 2, 3, 4, 5, 6, 7, 8] -#define EXTRUDERS 1 +#define EXTRUDERS 2 // Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc. #define DEFAULT_NOMINAL_FILAMENT_DIA 1.75 @@ -416,8 +418,8 @@ * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. */ -#define TEMP_SENSOR_0 1 -#define TEMP_SENSOR_1 0 +#define TEMP_SENSOR_0 5 +#define TEMP_SENSOR_1 5 #define TEMP_SENSOR_2 0 #define TEMP_SENSOR_3 0 #define TEMP_SENSOR_4 0 @@ -444,9 +446,9 @@ //#define TEMP_SENSOR_1_AS_REDUNDANT #define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10 -#define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 +#define TEMP_RESIDENCY_TIME 2 // (seconds) Time to wait for hotend to "settle" in M109 +#define TEMP_HYSTERESIS 5 // (°C) Temperature proximity considered "close enough" to the target #define TEMP_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target #define TEMP_BED_RESIDENCY_TIME 10 // (seconds) Time to wait for bed to "settle" in M190 #define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer @@ -510,16 +512,17 @@ //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) // Set/get with gcode: M301 E[extruder number, 0-2] + // Mendel Parts V9 on 12V #if ENABLED(PID_PARAMS_PER_HOTEND) // Specify between 1 and HOTENDS values per array. // If fewer than EXTRUDER values are provided, the last element will be repeated. - #define DEFAULT_Kp_LIST { 22.20, 22.20 } - #define DEFAULT_Ki_LIST { 1.08, 1.08 } - #define DEFAULT_Kd_LIST { 114.00, 114.00 } + #define DEFAULT_Kp_LIST { 63.00, 63.00 } + #define DEFAULT_Ki_LIST { 2.25, 2.25 } + #define DEFAULT_Kd_LIST { 440.00, 440.00 } #else - #define DEFAULT_Kp 22.20 - #define DEFAULT_Ki 1.08 - #define DEFAULT_Kd 114.00 + #define DEFAULT_Kp 63.00 + #define DEFAULT_Ki 2.25 + #define DEFAULT_Kd 440.00 #endif #endif // PIDTEMP @@ -717,13 +720,13 @@ #endif // Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define X_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_PROBE_ENDSTOP_INVERTING false // Set to true to invert the logic of the probe. +#define X_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Y_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Z_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define X_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Y_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Z_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Z_MIN_PROBE_ENDSTOP_INVERTING true // Set to true to invert the logic of the probe. /** * Stepper Drivers @@ -752,7 +755,7 @@ //#define Z3_DRIVER_TYPE A4988 //#define Z4_DRIVER_TYPE A4988 #define E0_DRIVER_TYPE A4988 -//#define E1_DRIVER_TYPE A4988 +#define E1_DRIVER_TYPE A4988 //#define E2_DRIVER_TYPE A4988 //#define E3_DRIVER_TYPE A4988 //#define E4_DRIVER_TYPE A4988 @@ -806,14 +809,14 @@ * Override with M92 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 500 } +#define DEFAULT_AXIS_STEPS_PER_UNIT { 134.74, 134.74, 4266.66, 148.7 } /** * Default Max Feed Rate (mm/s) * Override with M203 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 } +#define DEFAULT_MAX_FEEDRATE { 160, 160, 10, 10000 } //#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 #if ENABLED(LIMITED_MAX_FR_EDITING) @@ -826,7 +829,7 @@ * Override with M201 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 } +#define DEFAULT_MAX_ACCELERATION { 9000, 9000, 100, 10000 } //#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 #if ENABLED(LIMITED_MAX_ACCEL_EDITING) @@ -841,8 +844,8 @@ * M204 R Retract Acceleration * M204 T Travel Acceleration */ -#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts +#define DEFAULT_ACCELERATION 6000 // X, Y, Z and E acceleration for printing moves +#define DEFAULT_RETRACT_ACCELERATION 6000 // E acceleration for retracts #define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves /** @@ -877,7 +880,7 @@ * https://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html */ #if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.013 // (mm) Distance from real junction edge + #define JUNCTION_DEVIATION_MM 0.007 // (mm) Distance from real junction edge #define JD_HANDLE_SMALL_SEGMENTS // Use curvature estimation instead of just the junction angle // for small segments (< 1mm) with large junction angles (> 135°). #endif @@ -1065,7 +1068,7 @@ #define XY_PROBE_FEEDRATE (133*60) // Feedrate (mm/min) for the first approach when double-probing (MULTIPLE_PROBING == 2) -#define Z_PROBE_FEEDRATE_FAST (4*60) +#define Z_PROBE_FEEDRATE_FAST (8*60) // Feedrate (mm/min) for the "accurate" probe of each point #define Z_PROBE_FEEDRATE_SLOW (Z_PROBE_FEEDRATE_FAST / 2) @@ -1123,7 +1126,7 @@ * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. */ -#define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow +#define Z_CLEARANCE_DEPLOY_PROBE 15 // Z Clearance for Deploy/Stow #define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points #define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes //#define Z_AFTER_PROBING 5 // Z position after probing is done @@ -1192,13 +1195,13 @@ // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR false #define INVERT_Y_DIR true -#define INVERT_Z_DIR false +#define INVERT_Z_DIR true // @section extruder // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR false -#define INVERT_E1_DIR false +#define INVERT_E1_DIR true #define INVERT_E2_DIR false #define INVERT_E3_DIR false #define INVERT_E4_DIR false @@ -1233,7 +1236,7 @@ // The size of the printable area #define X_BED_SIZE 200 -#define Y_BED_SIZE 200 +#define Y_BED_SIZE 180 // Travel limits (mm) after homing, corresponding to endstop positions. #define X_MIN_POS 0 @@ -1241,7 +1244,7 @@ #define Z_MIN_POS 0 #define X_MAX_POS X_BED_SIZE #define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 200 +#define Z_MAX_POS 190 /** * Software Endstops @@ -1595,7 +1598,7 @@ #endif // Homing speeds (mm/min) -#define HOMING_FEEDRATE_MM_M { (50*60), (50*60), (4*60) } +#define HOMING_FEEDRATE_MM_M { (50*60), (50*60), (8*60) } // Validate that endstops are triggered on homing moves #define VALIDATE_HOMING_ENDSTOPS @@ -1672,7 +1675,7 @@ * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) */ -//#define EEPROM_SETTINGS // Persistent storage with M500 and M501 +#define EEPROM_SETTINGS // Persistent storage with M500 and M501 //#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. #define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load @@ -1706,16 +1709,16 @@ // Preheat Constants - Up to 5 are supported without changes // #define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 180 -#define PREHEAT_1_TEMP_BED 70 +#define PREHEAT_1_TEMP_HOTEND 210 +#define PREHEAT_1_TEMP_BED 0 #define PREHEAT_1_TEMP_CHAMBER 35 -#define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 +#define PREHEAT_1_FAN_SPEED 165 // Value from 0 to 255 #define PREHEAT_2_LABEL "ABS" -#define PREHEAT_2_TEMP_HOTEND 240 -#define PREHEAT_2_TEMP_BED 110 +#define PREHEAT_2_TEMP_HOTEND 245 +#define PREHEAT_2_TEMP_BED 0 #define PREHEAT_2_TEMP_CHAMBER 35 -#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 +#define PREHEAT_2_FAN_SPEED 165 // Value from 0 to 255 /** * Nozzle Park @@ -1936,7 +1939,7 @@ * SD Card support is disabled by default. If your controller has an SD slot, * you must uncomment the following option or it won't work. */ -//#define SDSUPPORT +#define SDSUPPORT /** * SD CARD: ENABLE CRC @@ -1960,13 +1963,13 @@ // This option overrides the default number of encoder pulses needed to // produce one step. Should be increased for high-resolution encoders. // -//#define ENCODER_PULSES_PER_STEP 4 +#define ENCODER_PULSES_PER_STEP 4 // // Use this option to override the number of step signals required to // move between next/prev menu items. // -//#define ENCODER_STEPS_PER_MENU_ITEM 1 +#define ENCODER_STEPS_PER_MENU_ITEM 1 /** * Encoder Direction Options @@ -1991,7 +1994,7 @@ // If CLOCKWISE normally moves DOWN this makes it go UP. // If CLOCKWISE normally moves UP this makes it go DOWN. // -//#define REVERSE_MENU_DIRECTION +#define REVERSE_MENU_DIRECTION // // This option reverses the encoder direction for Select Screen. @@ -2056,7 +2059,7 @@ // // ULTIMAKER Controller. // -//#define ULTIMAKERCONTROLLER +#define ULTIMAKERCONTROLLER // // ULTIPANEL as seen on Thingiverse. @@ -2671,14 +2674,15 @@ * * LED Type. Enable only one of the following two options. */ -//#define RGB_LED +//#define RGB_LED // Enable for the Velleman RGB LED Add-on. https://www.velleman.eu/products/view/?id=430100 //#define RGBW_LED #if EITHER(RGB_LED, RGBW_LED) - //#define RGB_LED_R_PIN 34 - //#define RGB_LED_G_PIN 43 - //#define RGB_LED_B_PIN 35 - //#define RGB_LED_W_PIN -1 + // Pin defines for the RGB LED Add-on. + #define RGB_LED_R_PIN 41 + #define RGB_LED_G_PIN 40 + #define RGB_LED_B_PIN 12 + #define RGB_LED_W_PIN -1 #endif // Support for Adafruit NeoPixel LED driver diff --git a/config/examples/Velleman/K8400/Dual-head/Configuration_adv.h b/config/examples/Velleman/K8400/Dual-head/Configuration_adv.h index 5335fa012a..b372e8fc3f 100644 --- a/config/examples/Velleman/K8400/Dual-head/Configuration_adv.h +++ b/config/examples/Velleman/K8400/Dual-head/Configuration_adv.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Velleman/K8400/Dual-head" + /** * Configuration_adv.h * @@ -140,9 +142,9 @@ // Heated Bed Bang-Bang options // #if DISABLED(PIDTEMPBED) - #define BED_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #define BED_CHECK_INTERVAL 1000 // (ms) Interval between checks in bang-bang control #if ENABLED(BED_LIMIT_SWITCHING) - #define BED_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > BED_HYSTERESIS + #define BED_HYSTERESIS 1 // (°C) Only set the relevant heater state when ABS(T-target) > BED_HYSTERESIS #endif #endif @@ -461,9 +463,9 @@ * The fan turns on automatically whenever any driver is enabled and turns * off (or reduces to idle speed) shortly after drivers are turned off. */ -//#define USE_CONTROLLER_FAN +#define USE_CONTROLLER_FAN #if ENABLED(USE_CONTROLLER_FAN) - //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan + #define CONTROLLER_FAN_PIN 2 // Set a custom pin for the controller fan //#define CONTROLLER_FAN_USE_Z_ONLY // With this option only the Z axis is considered //#define CONTROLLER_FAN_IGNORE_Z // Ignore Z stepper. Useful when stepper timeout is disabled. #define CONTROLLERFAN_SPEED_MIN 0 // (0-255) Minimum speed. (If set below this value the fan is turned off.) @@ -736,12 +738,12 @@ //#define SENSORLESS_BACKOFF_MM { 2, 2 } // (mm) Backoff from endstops before sensorless homing -#define HOMING_BUMP_MM { 5, 5, 2 } // (mm) Backoff from endstops after first bump +#define HOMING_BUMP_MM { 10, 10, 3 } // (mm) Backoff from endstops after first bump #define HOMING_BUMP_DIVISOR { 2, 2, 4 } // Re-Bump Speed Divisor (Divides the Homing Feedrate) //#define HOMING_BACKOFF_POST_MM { 2, 2, 2 } // (mm) Backoff from endstops after homing -//#define QUICK_HOME // If G28 contains XY do a diagonal move first +#define QUICK_HOME // If G28 contains XY do a diagonal move first //#define HOME_Y_BEFORE_X // If G28 contains XY home Y before X //#define HOME_Z_FIRST // Home Z first. Requires a Z-MIN endstop (not a probe). //#define CODEPENDENT_XY_HOMING // If X/Y can't home without homing Y/X first @@ -867,7 +869,7 @@ // On a 300mm bed a 5% grade would give a misalignment of ~1.5cm #define G34_MAX_GRADE 5 // (%) Maximum incline that G34 will handle - #define Z_STEPPER_ALIGN_ITERATIONS 5 // Number of iterations to apply during alignment + #define Z_STEPPER_ALIGN_ITERATIONS 3 // Number of iterations to apply during alignment #define Z_STEPPER_ALIGN_ACC 0.02 // Stop iterating early if the accuracy is better than this #define RESTORE_LEVELING_AFTER_G34 // Restore leveling after G34 is done? // After G34, re-home Z (G28 Z) or just calculate it from the last probe heights? @@ -2091,7 +2093,7 @@ // The ASCII buffer for serial input #define MAX_CMD_SIZE 96 -#define BUFSIZE 4 +#define BUFSIZE 26 // Transmission to Host Buffer Size // To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0. @@ -2314,11 +2316,11 @@ //#define ADVANCED_PAUSE_FEATURE #if ENABLED(ADVANCED_PAUSE_FEATURE) #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. - #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. + #define PAUSE_PARK_RETRACT_LENGTH 5 // (mm) Initial retract. // This short retract is done immediately, before parking the nozzle. #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast. #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload. + #define FILAMENT_CHANGE_UNLOAD_LENGTH 600 // (mm) The length of filament for a complete unload. // For Bowden, the full length of the tube and nozzle. // For direct drive, the full length of the nozzle. // Set to 0 for manual unloading. @@ -2332,7 +2334,7 @@ // For direct drive, the full length of the nozzle. //#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted. #define ADVANCED_PAUSE_PURGE_FEEDRATE 3 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate. - #define ADVANCED_PAUSE_PURGE_LENGTH 50 // (mm) Length to extrude after loading. + #define ADVANCED_PAUSE_PURGE_LENGTH 100 // (mm) Length to extrude after loading. // Set to 0 for manual extrusion. // Filament can be extruded repeatedly from the Filament Change menu // until extrusion is consistent, and to purge old filament. @@ -3562,12 +3564,12 @@ #define MAIN_MENU_ITEM_2_GCODE "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND) //#define MAIN_MENU_ITEM_2_CONFIRM - //#define MAIN_MENU_ITEM_3_DESC "Preheat for " PREHEAT_2_LABEL - //#define MAIN_MENU_ITEM_3_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) + #define MAIN_MENU_ITEM_3_DESC "Preheat for " PREHEAT_2_LABEL + #define MAIN_MENU_ITEM_3_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) //#define MAIN_MENU_ITEM_3_CONFIRM - //#define MAIN_MENU_ITEM_4_DESC "Heat Bed/Home/Level" - //#define MAIN_MENU_ITEM_4_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29" + #define MAIN_MENU_ITEM_4_DESC "Heat Bed/Home/Level" + #define MAIN_MENU_ITEM_4_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29" //#define MAIN_MENU_ITEM_4_CONFIRM //#define MAIN_MENU_ITEM_5_DESC "Home & Info" diff --git a/config/examples/Velleman/K8400/Single-head/Configuration.h b/config/examples/Velleman/K8400/Single-head/Configuration.h index 78c2dc9160..000cea2b2e 100644 --- a/config/examples/Velleman/K8400/Single-head/Configuration.h +++ b/config/examples/Velleman/K8400/Single-head/Configuration.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Velleman/K8400/Single-head" + /** * Configuration.h * @@ -69,7 +71,7 @@ // @section info // Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes. +#define STRING_CONFIG_H_AUTHOR "(Anthony Birkett, default config)" // Who made the changes. //#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) /** @@ -134,7 +136,7 @@ // Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_RAMPS_14_EFB + #define MOTHERBOARD BOARD_K8400 #endif // Name displayed in the LCD "Ready" message and Info menu @@ -416,7 +418,7 @@ * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. */ -#define TEMP_SENSOR_0 1 +#define TEMP_SENSOR_0 5 #define TEMP_SENSOR_1 0 #define TEMP_SENSOR_2 0 #define TEMP_SENSOR_3 0 @@ -444,9 +446,9 @@ //#define TEMP_SENSOR_1_AS_REDUNDANT #define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10 -#define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 +#define TEMP_RESIDENCY_TIME 2 // (seconds) Time to wait for hotend to "settle" in M109 #define TEMP_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target +#define TEMP_HYSTERESIS 5 // (°C) Temperature proximity considered "close enough" to the target #define TEMP_BED_RESIDENCY_TIME 10 // (seconds) Time to wait for bed to "settle" in M190 #define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer @@ -510,16 +512,17 @@ //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) // Set/get with gcode: M301 E[extruder number, 0-2] + // Mendel Parts V9 on 12V #if ENABLED(PID_PARAMS_PER_HOTEND) // Specify between 1 and HOTENDS values per array. // If fewer than EXTRUDER values are provided, the last element will be repeated. - #define DEFAULT_Kp_LIST { 22.20, 22.20 } - #define DEFAULT_Ki_LIST { 1.08, 1.08 } - #define DEFAULT_Kd_LIST { 114.00, 114.00 } + #define DEFAULT_Kp_LIST { 63.00, 63.00 } + #define DEFAULT_Ki_LIST { 2.25, 2.25 } + #define DEFAULT_Kd_LIST { 440.00, 440.00 } #else - #define DEFAULT_Kp 22.20 - #define DEFAULT_Ki 1.08 - #define DEFAULT_Kd 114.00 + #define DEFAULT_Kp 63.00 + #define DEFAULT_Ki 2.25 + #define DEFAULT_Kd 440.00 #endif #endif // PIDTEMP @@ -717,13 +720,13 @@ #endif // Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define X_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_PROBE_ENDSTOP_INVERTING false // Set to true to invert the logic of the probe. +#define X_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Y_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Z_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define X_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Y_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Z_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Z_MIN_PROBE_ENDSTOP_INVERTING true // Set to true to invert the logic of the probe. /** * Stepper Drivers @@ -806,14 +809,14 @@ * Override with M92 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 500 } +#define DEFAULT_AXIS_STEPS_PER_UNIT { 134.74, 134.74, 4266.66, 148.7 } /** * Default Max Feed Rate (mm/s) * Override with M203 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 } +#define DEFAULT_MAX_FEEDRATE { 160, 160, 10, 10000 } //#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 #if ENABLED(LIMITED_MAX_FR_EDITING) @@ -826,7 +829,7 @@ * Override with M201 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 } +#define DEFAULT_MAX_ACCELERATION { 9000, 9000, 100, 10000 } //#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 #if ENABLED(LIMITED_MAX_ACCEL_EDITING) @@ -841,8 +844,8 @@ * M204 R Retract Acceleration * M204 T Travel Acceleration */ -#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts +#define DEFAULT_ACCELERATION 6000 // X, Y, Z and E acceleration for printing moves +#define DEFAULT_RETRACT_ACCELERATION 6000 // E acceleration for retracts #define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves /** @@ -857,7 +860,7 @@ #if ENABLED(CLASSIC_JERK) #define DEFAULT_XJERK 10.0 #define DEFAULT_YJERK 10.0 - #define DEFAULT_ZJERK 0.3 + #define DEFAULT_ZJERK 0.5 //#define TRAVEL_EXTRA_XYJERK 0.0 // Additional jerk allowance for all travel moves @@ -867,7 +870,7 @@ #endif #endif -#define DEFAULT_EJERK 5.0 // May be used by Linear Advance +#define DEFAULT_EJERK 20.0 // May be used by Linear Advance /** * Junction Deviation Factor @@ -877,7 +880,7 @@ * https://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html */ #if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.013 // (mm) Distance from real junction edge + #define JUNCTION_DEVIATION_MM 0.007 // (mm) Distance from real junction edge #define JD_HANDLE_SMALL_SEGMENTS // Use curvature estimation instead of just the junction angle // for small segments (< 1mm) with large junction angles (> 135°). #endif @@ -1065,7 +1068,7 @@ #define XY_PROBE_FEEDRATE (133*60) // Feedrate (mm/min) for the first approach when double-probing (MULTIPLE_PROBING == 2) -#define Z_PROBE_FEEDRATE_FAST (4*60) +#define Z_PROBE_FEEDRATE_FAST (8*60) // Feedrate (mm/min) for the "accurate" probe of each point #define Z_PROBE_FEEDRATE_SLOW (Z_PROBE_FEEDRATE_FAST / 2) @@ -1123,7 +1126,7 @@ * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. */ -#define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow +#define Z_CLEARANCE_DEPLOY_PROBE 15 // Z Clearance for Deploy/Stow #define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points #define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes //#define Z_AFTER_PROBING 5 // Z position after probing is done @@ -1192,13 +1195,13 @@ // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR false #define INVERT_Y_DIR true -#define INVERT_Z_DIR false +#define INVERT_Z_DIR true // @section extruder // For direct drive extruder v9 set to true, for geared extruder set to false. #define INVERT_E0_DIR false -#define INVERT_E1_DIR false +#define INVERT_E1_DIR true #define INVERT_E2_DIR false #define INVERT_E3_DIR false #define INVERT_E4_DIR false @@ -1233,7 +1236,7 @@ // The size of the printable area #define X_BED_SIZE 200 -#define Y_BED_SIZE 200 +#define Y_BED_SIZE 180 // Travel limits (mm) after homing, corresponding to endstop positions. #define X_MIN_POS 0 @@ -1241,7 +1244,7 @@ #define Z_MIN_POS 0 #define X_MAX_POS X_BED_SIZE #define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 200 +#define Z_MAX_POS 190 /** * Software Endstops @@ -1595,7 +1598,7 @@ #endif // Homing speeds (mm/min) -#define HOMING_FEEDRATE_MM_M { (50*60), (50*60), (4*60) } +#define HOMING_FEEDRATE_MM_M { (50*60), (50*60), (8*60) } // Validate that endstops are triggered on homing moves #define VALIDATE_HOMING_ENDSTOPS @@ -1672,7 +1675,7 @@ * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) */ -//#define EEPROM_SETTINGS // Persistent storage with M500 and M501 +#define EEPROM_SETTINGS // Persistent storage with M500 and M501 //#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. #define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load @@ -1706,16 +1709,16 @@ // Preheat Constants - Up to 5 are supported without changes // #define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 180 -#define PREHEAT_1_TEMP_BED 70 +#define PREHEAT_1_TEMP_HOTEND 210 +#define PREHEAT_1_TEMP_BED 0 #define PREHEAT_1_TEMP_CHAMBER 35 -#define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 +#define PREHEAT_1_FAN_SPEED 165 // Value from 0 to 255 #define PREHEAT_2_LABEL "ABS" -#define PREHEAT_2_TEMP_HOTEND 240 -#define PREHEAT_2_TEMP_BED 110 +#define PREHEAT_2_TEMP_HOTEND 245 +#define PREHEAT_2_TEMP_BED 0 #define PREHEAT_2_TEMP_CHAMBER 35 -#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 +#define PREHEAT_2_FAN_SPEED 165 // Value from 0 to 255 /** * Nozzle Park @@ -1936,7 +1939,7 @@ * SD Card support is disabled by default. If your controller has an SD slot, * you must uncomment the following option or it won't work. */ -//#define SDSUPPORT +#define SDSUPPORT /** * SD CARD: ENABLE CRC @@ -1960,13 +1963,13 @@ // This option overrides the default number of encoder pulses needed to // produce one step. Should be increased for high-resolution encoders. // -//#define ENCODER_PULSES_PER_STEP 4 +#define ENCODER_PULSES_PER_STEP 4 // // Use this option to override the number of step signals required to // move between next/prev menu items. // -//#define ENCODER_STEPS_PER_MENU_ITEM 1 +#define ENCODER_STEPS_PER_MENU_ITEM 1 /** * Encoder Direction Options @@ -1991,7 +1994,7 @@ // If CLOCKWISE normally moves DOWN this makes it go UP. // If CLOCKWISE normally moves UP this makes it go DOWN. // -//#define REVERSE_MENU_DIRECTION +#define REVERSE_MENU_DIRECTION // // This option reverses the encoder direction for Select Screen. @@ -2056,7 +2059,7 @@ // // ULTIMAKER Controller. // -//#define ULTIMAKERCONTROLLER +#define ULTIMAKERCONTROLLER // // ULTIPANEL as seen on Thingiverse. @@ -2671,14 +2674,15 @@ * * LED Type. Enable only one of the following two options. */ -//#define RGB_LED +//#define RGB_LED // Enable for the Velleman RGB LED Add-on. https://www.velleman.eu/products/view/?id=430100 //#define RGBW_LED #if EITHER(RGB_LED, RGBW_LED) - //#define RGB_LED_R_PIN 34 - //#define RGB_LED_G_PIN 43 - //#define RGB_LED_B_PIN 35 - //#define RGB_LED_W_PIN -1 + // Pin defines for the RGB LED Add-on. + #define RGB_LED_R_PIN 41 + #define RGB_LED_G_PIN 40 + #define RGB_LED_B_PIN 12 + #define RGB_LED_W_PIN -1 #endif // Support for Adafruit NeoPixel LED driver diff --git a/config/examples/Velleman/K8400/Single-head/Configuration_adv.h b/config/examples/Velleman/K8400/Single-head/Configuration_adv.h index 5335fa012a..dae506940a 100644 --- a/config/examples/Velleman/K8400/Single-head/Configuration_adv.h +++ b/config/examples/Velleman/K8400/Single-head/Configuration_adv.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Velleman/K8400/Single-head" + /** * Configuration_adv.h * @@ -140,9 +142,9 @@ // Heated Bed Bang-Bang options // #if DISABLED(PIDTEMPBED) - #define BED_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control + #define BED_CHECK_INTERVAL 1000 // (ms) Interval between checks in bang-bang control #if ENABLED(BED_LIMIT_SWITCHING) - #define BED_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > BED_HYSTERESIS + #define BED_HYSTERESIS 1 // (°C) Only set the relevant heater state when ABS(T-target) > BED_HYSTERESIS #endif #endif @@ -461,9 +463,9 @@ * The fan turns on automatically whenever any driver is enabled and turns * off (or reduces to idle speed) shortly after drivers are turned off. */ -//#define USE_CONTROLLER_FAN +#define USE_CONTROLLER_FAN #if ENABLED(USE_CONTROLLER_FAN) - //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan + #define CONTROLLER_FAN_PIN 2 // Set a custom pin for the controller fan //#define CONTROLLER_FAN_USE_Z_ONLY // With this option only the Z axis is considered //#define CONTROLLER_FAN_IGNORE_Z // Ignore Z stepper. Useful when stepper timeout is disabled. #define CONTROLLERFAN_SPEED_MIN 0 // (0-255) Minimum speed. (If set below this value the fan is turned off.) @@ -736,12 +738,12 @@ //#define SENSORLESS_BACKOFF_MM { 2, 2 } // (mm) Backoff from endstops before sensorless homing -#define HOMING_BUMP_MM { 5, 5, 2 } // (mm) Backoff from endstops after first bump +#define HOMING_BUMP_MM { 10, 10, 3 } // (mm) Backoff from endstops after first bump #define HOMING_BUMP_DIVISOR { 2, 2, 4 } // Re-Bump Speed Divisor (Divides the Homing Feedrate) //#define HOMING_BACKOFF_POST_MM { 2, 2, 2 } // (mm) Backoff from endstops after homing -//#define QUICK_HOME // If G28 contains XY do a diagonal move first +#define QUICK_HOME // If G28 contains XY do a diagonal move first //#define HOME_Y_BEFORE_X // If G28 contains XY home Y before X //#define HOME_Z_FIRST // Home Z first. Requires a Z-MIN endstop (not a probe). //#define CODEPENDENT_XY_HOMING // If X/Y can't home without homing Y/X first @@ -867,7 +869,7 @@ // On a 300mm bed a 5% grade would give a misalignment of ~1.5cm #define G34_MAX_GRADE 5 // (%) Maximum incline that G34 will handle - #define Z_STEPPER_ALIGN_ITERATIONS 5 // Number of iterations to apply during alignment + #define Z_STEPPER_ALIGN_ITERATIONS 3 // Number of iterations to apply during alignment #define Z_STEPPER_ALIGN_ACC 0.02 // Stop iterating early if the accuracy is better than this #define RESTORE_LEVELING_AFTER_G34 // Restore leveling after G34 is done? // After G34, re-home Z (G28 Z) or just calculate it from the last probe heights? @@ -2091,7 +2093,7 @@ // The ASCII buffer for serial input #define MAX_CMD_SIZE 96 -#define BUFSIZE 4 +#define BUFSIZE 26 // Transmission to Host Buffer Size // To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0. @@ -2314,11 +2316,11 @@ //#define ADVANCED_PAUSE_FEATURE #if ENABLED(ADVANCED_PAUSE_FEATURE) #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. - #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. + #define PAUSE_PARK_RETRACT_LENGTH 5 // (mm) Initial retract. // This short retract is done immediately, before parking the nozzle. #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast. #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload. + #define FILAMENT_CHANGE_UNLOAD_LENGTH 600 // (mm) The length of filament for a complete unload. // For Bowden, the full length of the tube and nozzle. // For direct drive, the full length of the nozzle. // Set to 0 for manual unloading. @@ -2332,7 +2334,7 @@ // For direct drive, the full length of the nozzle. //#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted. #define ADVANCED_PAUSE_PURGE_FEEDRATE 3 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate. - #define ADVANCED_PAUSE_PURGE_LENGTH 50 // (mm) Length to extrude after loading. + #define ADVANCED_PAUSE_PURGE_LENGTH 100 // (mm) Length to extrude after loading. // Set to 0 for manual extrusion. // Filament can be extruded repeatedly from the Filament Change menu // until extrusion is consistent, and to purge old filament. @@ -3562,12 +3564,12 @@ #define MAIN_MENU_ITEM_2_GCODE "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND) //#define MAIN_MENU_ITEM_2_CONFIRM - //#define MAIN_MENU_ITEM_3_DESC "Preheat for " PREHEAT_2_LABEL - //#define MAIN_MENU_ITEM_3_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) + #define MAIN_MENU_ITEM_3_DESC "Preheat for " PREHEAT_2_LABEL + #define MAIN_MENU_ITEM_3_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) //#define MAIN_MENU_ITEM_3_CONFIRM - //#define MAIN_MENU_ITEM_4_DESC "Heat Bed/Home/Level" - //#define MAIN_MENU_ITEM_4_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29" + #define MAIN_MENU_ITEM_4_DESC "Heat Bed/Home/Level" + #define MAIN_MENU_ITEM_4_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29" //#define MAIN_MENU_ITEM_4_CONFIRM //#define MAIN_MENU_ITEM_5_DESC "Home & Info" diff --git a/config/examples/WASP/PowerWASP/Configuration.h b/config/examples/WASP/PowerWASP/Configuration.h index 78c2dc9160..2a4c9cd21e 100644 --- a/config/examples/WASP/PowerWASP/Configuration.h +++ b/config/examples/WASP/PowerWASP/Configuration.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "WASP/PowerWASP" + /** * Configuration.h * @@ -69,7 +71,7 @@ // @section info // Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes. +#define STRING_CONFIG_H_AUTHOR "(Julian + Jason)" // Who made the changes. //#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) /** @@ -109,7 +111,20 @@ * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] */ -//#define SERIAL_PORT_2 -1 +#define SERIAL_PORT_2 3 + +/** + * Internal onboard port for WASP + * + * (Top view) + * .------------.---------------------. + * | | Arduino Serial3 | + * | Stepper | [O] 5V | Front + * | drivers | [O] GND | panel + * | & fan | [O] TX | side + * | | [O] RX | + * `------------´---------------------´ + */ /** * Select a third serial port on the board to use for communication with the host. @@ -134,11 +149,11 @@ // Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_RAMPS_14_EFB + #define MOTHERBOARD BOARD_ULTIMAKER #endif // Name displayed in the LCD "Ready" message and Info menu -//#define CUSTOM_MACHINE_NAME "3D Printer" +#define CUSTOM_MACHINE_NAME "PowerWASP" // Printer's unique ID, used by some programs to differentiate between machines. // Choose your own or use a service like https://www.uuidgenerator.net/version4 @@ -416,7 +431,7 @@ * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. */ -#define TEMP_SENSOR_0 1 +#define TEMP_SENSOR_0 -1 #define TEMP_SENSOR_1 0 #define TEMP_SENSOR_2 0 #define TEMP_SENSOR_3 0 @@ -444,7 +459,7 @@ //#define TEMP_SENSOR_1_AS_REDUNDANT #define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10 -#define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 +#define TEMP_RESIDENCY_TIME 5 // (seconds) Time to wait for hotend to "settle" in M109 #define TEMP_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer #define TEMP_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target @@ -472,7 +487,7 @@ // Above this temperature the heater will be switched off. // This can protect components from overheating, but NOT from shorts and failures. // (Use MINTEMP for thermistor short/failure protection.) -#define HEATER_0_MAXTEMP 275 +#define HEATER_0_MAXTEMP 230 #define HEATER_1_MAXTEMP 275 #define HEATER_2_MAXTEMP 275 #define HEATER_3_MAXTEMP 275 @@ -510,16 +525,17 @@ //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) // Set/get with gcode: M301 E[extruder number, 0-2] + // POWERwasp #if ENABLED(PID_PARAMS_PER_HOTEND) // Specify between 1 and HOTENDS values per array. // If fewer than EXTRUDER values are provided, the last element will be repeated. - #define DEFAULT_Kp_LIST { 22.20, 22.20 } - #define DEFAULT_Ki_LIST { 1.08, 1.08 } - #define DEFAULT_Kd_LIST { 114.00, 114.00 } + #define DEFAULT_Kp_LIST { 27.56, 27.56 } + #define DEFAULT_Ki_LIST { 5.34, 5.34 } + #define DEFAULT_Kd_LIST { 35.56, 35.56 } #else - #define DEFAULT_Kp 22.20 - #define DEFAULT_Ki 1.08 - #define DEFAULT_Kd 114.00 + #define DEFAULT_Kp 27.56 + #define DEFAULT_Ki 5.34 + #define DEFAULT_Kd 35.56 #endif #endif // PIDTEMP @@ -633,8 +649,8 @@ * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. * Note: For Bowden Extruders make this large enough to allow load/unload. */ -#define PREVENT_LENGTHY_EXTRUDE -#define EXTRUDE_MAXLENGTH 200 +//#define PREVENT_LENGTHY_EXTRUDE +#define EXTRUDE_MAXLENGTH 500 //=========================================================================== //======================== Thermal Runaway Protection ======================= @@ -686,21 +702,21 @@ #define USE_XMIN_PLUG #define USE_YMIN_PLUG #define USE_ZMIN_PLUG -//#define USE_XMAX_PLUG -//#define USE_YMAX_PLUG -//#define USE_ZMAX_PLUG +#define USE_XMAX_PLUG +#define USE_YMAX_PLUG +#define USE_ZMAX_PLUG // Enable pullup for all endstops to prevent a floating state #define ENDSTOPPULLUPS #if DISABLED(ENDSTOPPULLUPS) // Disable ENDSTOPPULLUPS to set pullups individually - //#define ENDSTOPPULLUP_XMAX - //#define ENDSTOPPULLUP_YMAX - //#define ENDSTOPPULLUP_ZMAX - //#define ENDSTOPPULLUP_XMIN - //#define ENDSTOPPULLUP_YMIN - //#define ENDSTOPPULLUP_ZMIN - //#define ENDSTOPPULLUP_ZMIN_PROBE + #define ENDSTOPPULLUP_XMAX + #define ENDSTOPPULLUP_YMAX + #define ENDSTOPPULLUP_ZMAX + #define ENDSTOPPULLUP_XMIN + #define ENDSTOPPULLUP_YMIN + #define ENDSTOPPULLUP_ZMIN + #define ENDSTOPPULLUP_ZMIN_PROBE #endif // Enable pulldown for all endstops to prevent a floating state @@ -717,13 +733,13 @@ #endif // Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define X_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_PROBE_ENDSTOP_INVERTING false // Set to true to invert the logic of the probe. +#define X_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Y_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Z_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define X_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Y_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Z_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Z_MIN_PROBE_ENDSTOP_INVERTING true // Set to true to invert the logic of the probe. /** * Stepper Drivers @@ -806,14 +822,14 @@ * Override with M92 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 500 } +#define DEFAULT_AXIS_STEPS_PER_UNIT { 85.48,85.48,533.33,104.7 } /** * Default Max Feed Rate (mm/s) * Override with M203 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 } +#define DEFAULT_MAX_FEEDRATE { 150, 150, 15, 20 } //#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 #if ENABLED(LIMITED_MAX_FR_EDITING) @@ -826,7 +842,7 @@ * Override with M201 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 } +#define DEFAULT_MAX_ACCELERATION { 10000, 10000, 50, 500 } //#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 #if ENABLED(LIMITED_MAX_ACCEL_EDITING) @@ -841,8 +857,8 @@ * M204 R Retract Acceleration * M204 T Travel Acceleration */ -#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts +#define DEFAULT_ACCELERATION 4000 // X, Y, Z and E acceleration for printing moves +#define DEFAULT_RETRACT_ACCELERATION 500 // E acceleration for retracts #define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves /** @@ -855,9 +871,9 @@ */ //#define CLASSIC_JERK #if ENABLED(CLASSIC_JERK) - #define DEFAULT_XJERK 10.0 - #define DEFAULT_YJERK 10.0 - #define DEFAULT_ZJERK 0.3 + #define DEFAULT_XJERK 15.0 + #define DEFAULT_YJERK 15.0 + #define DEFAULT_ZJERK 0.5 //#define TRAVEL_EXTRA_XYJERK 0.0 // Additional jerk allowance for all travel moves @@ -867,7 +883,7 @@ #endif #endif -#define DEFAULT_EJERK 5.0 // May be used by Linear Advance +#define DEFAULT_EJERK 1.0 // May be used by Linear Advance /** * Junction Deviation Factor @@ -877,7 +893,7 @@ * https://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html */ #if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.013 // (mm) Distance from real junction edge + #define JUNCTION_DEVIATION_MM 0.023 // (mm) Distance from real junction edge #define JD_HANDLE_SMALL_SEGMENTS // Use curvature estimation instead of just the junction angle // for small segments (< 1mm) with large junction angles (> 135°). #endif @@ -890,7 +906,7 @@ * * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained */ -//#define S_CURVE_ACCELERATION +#define S_CURVE_ACCELERATION //=========================================================================== //============================= Z Probe Options ============================= @@ -906,7 +922,7 @@ * The probe replaces the Z-MIN endstop and is used for Z homing. * (Automatically enables USE_PROBE_FOR_Z_HOMING.) */ -#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN +//#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN // Force the use of the probe for Z-axis homing //#define USE_PROBE_FOR_Z_HOMING @@ -940,7 +956,7 @@ * Use G29 repeatedly, adjusting the Z height at each point with movement commands * or (with LCD_BED_LEVELING) the LCD controller. */ -//#define PROBE_MANUALLY +#define PROBE_MANUALLY /** * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. @@ -1062,10 +1078,10 @@ #define PROBING_MARGIN 10 // X and Y axis travel speed (mm/min) between probes -#define XY_PROBE_FEEDRATE (133*60) +#define XY_PROBE_FEEDRATE (16*60) // Feedrate (mm/min) for the first approach when double-probing (MULTIPLE_PROBING == 2) -#define Z_PROBE_FEEDRATE_FAST (4*60) +#define Z_PROBE_FEEDRATE_FAST (8*60) // Feedrate (mm/min) for the "accurate" probe of each point #define Z_PROBE_FEEDRATE_SLOW (Z_PROBE_FEEDRATE_FAST / 2) @@ -1190,9 +1206,9 @@ // @section machine // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR false -#define INVERT_Y_DIR true -#define INVERT_Z_DIR false +#define INVERT_X_DIR true +#define INVERT_Y_DIR false +#define INVERT_Z_DIR true // @section extruder @@ -1227,13 +1243,13 @@ // :[-1,1] #define X_HOME_DIR -1 #define Y_HOME_DIR -1 -#define Z_HOME_DIR -1 +#define Z_HOME_DIR 1 // @section machine // The size of the printable area -#define X_BED_SIZE 200 -#define Y_BED_SIZE 200 +#define X_BED_SIZE 261 +#define Y_BED_SIZE 193 // Travel limits (mm) after homing, corresponding to endstop positions. #define X_MIN_POS 0 @@ -1241,7 +1257,7 @@ #define Z_MIN_POS 0 #define X_MAX_POS X_BED_SIZE #define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 200 +#define Z_MAX_POS 191.9 /** * Software Endstops @@ -1253,7 +1269,7 @@ */ // Min software endstops constrain movement within minimum coordinate bounds -#define MIN_SOFTWARE_ENDSTOPS +//#define MIN_SOFTWARE_ENDSTOPS #if ENABLED(MIN_SOFTWARE_ENDSTOPS) #define MIN_SOFTWARE_ENDSTOP_X #define MIN_SOFTWARE_ENDSTOP_Y @@ -1261,7 +1277,7 @@ #endif // Max software endstops constrain movement within maximum coordinate bounds -#define MAX_SOFTWARE_ENDSTOPS +//#define MAX_SOFTWARE_ENDSTOPS #if ENABLED(MAX_SOFTWARE_ENDSTOPS) #define MAX_SOFTWARE_ENDSTOP_X #define MAX_SOFTWARE_ENDSTOP_Y @@ -1389,14 +1405,14 @@ //#define AUTO_BED_LEVELING_LINEAR //#define AUTO_BED_LEVELING_BILINEAR //#define AUTO_BED_LEVELING_UBL -//#define MESH_BED_LEVELING +#define MESH_BED_LEVELING /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable * leveling immediately after G28. */ -//#define RESTORE_LEVELING_AFTER_G28 +#define RESTORE_LEVELING_AFTER_G28 //#define ENABLE_LEVELING_AFTER_G28 /** @@ -1518,7 +1534,7 @@ * Add a bed leveling sub-menu for ABL or MBL. * Include a guided procedure if manual probing is enabled. */ -//#define LCD_BED_LEVELING +#define LCD_BED_LEVELING #if ENABLED(LCD_BED_LEVELING) #define MESH_EDIT_Z_STEP 0.025 // (mm) Step size while manually probing Z axis. @@ -1595,7 +1611,7 @@ #endif // Homing speeds (mm/min) -#define HOMING_FEEDRATE_MM_M { (50*60), (50*60), (4*60) } +#define HOMING_FEEDRATE_MM_M { (50*60), (50*60), (8*60) } // Validate that endstops are triggered on homing moves #define VALIDATE_HOMING_ENDSTOPS @@ -1672,7 +1688,7 @@ * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) */ -//#define EEPROM_SETTINGS // Persistent storage with M500 and M501 +#define EEPROM_SETTINGS // Persistent storage with M500 and M501 //#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. #define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load @@ -1706,7 +1722,7 @@ // Preheat Constants - Up to 5 are supported without changes // #define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 180 +#define PREHEAT_1_TEMP_HOTEND 190 #define PREHEAT_1_TEMP_BED 70 #define PREHEAT_1_TEMP_CHAMBER 35 #define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 @@ -1728,16 +1744,16 @@ * P1 Raise the nozzle always to Z-park height. * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. */ -//#define NOZZLE_PARK_FEATURE +#define NOZZLE_PARK_FEATURE #if ENABLED(NOZZLE_PARK_FEATURE) // Specify a park position as { X, Y, Z_raise } - #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 } + #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 190 } //#define NOZZLE_PARK_X_ONLY // X move only is required to park //#define NOZZLE_PARK_Y_ONLY // Y move only is required to park #define NOZZLE_PARK_Z_RAISE_MIN 2 // (mm) Always raise Z by at least this distance #define NOZZLE_PARK_XY_FEEDRATE 100 // (mm/s) X and Y axes feedrate (also used for delta Z axis) - #define NOZZLE_PARK_Z_FEEDRATE 5 // (mm/s) Z axis feedrate (not used for delta printers) + #define NOZZLE_PARK_Z_FEEDRATE 10 // (mm/s) Z axis feedrate (not used for delta printers) #endif /** @@ -1921,7 +1937,7 @@ * * :['JAPANESE', 'WESTERN', 'CYRILLIC'] */ -#define DISPLAY_CHARSET_HD44780 JAPANESE +#define DISPLAY_CHARSET_HD44780 WESTERN /** * Info Screen Style (0:Classic, 1:Průša) @@ -1936,14 +1952,14 @@ * SD Card support is disabled by default. If your controller has an SD slot, * you must uncomment the following option or it won't work. */ -//#define SDSUPPORT +#define SDSUPPORT /** * SD CARD: ENABLE CRC * * Use CRC checks and retries on the SD communication. */ -//#define SD_CHECK_AND_RETRY +#define SD_CHECK_AND_RETRY /** * LCD Menu Items @@ -1960,13 +1976,13 @@ // This option overrides the default number of encoder pulses needed to // produce one step. Should be increased for high-resolution encoders. // -//#define ENCODER_PULSES_PER_STEP 4 +#define ENCODER_PULSES_PER_STEP 4 // // Use this option to override the number of step signals required to // move between next/prev menu items. // -//#define ENCODER_STEPS_PER_MENU_ITEM 1 +#define ENCODER_STEPS_PER_MENU_ITEM 1 /** * Encoder Direction Options @@ -1983,7 +1999,7 @@ // // Set this option if CLOCKWISE causes values to DECREASE // -//#define REVERSE_ENCODER_DIRECTION +#define REVERSE_ENCODER_DIRECTION // // This option reverses the encoder direction for navigating LCD menus. @@ -2023,8 +2039,8 @@ // Note: Test audio output with the G-Code: // M300 S P // -//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 -//#define LCD_FEEDBACK_FREQUENCY_HZ 5000 +#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 20 +#define LCD_FEEDBACK_FREQUENCY_HZ 5000 //============================================================================= //======================== LCD / Controller Selection ========================= @@ -2061,7 +2077,7 @@ // // ULTIPANEL as seen on Thingiverse. // -//#define ULTIPANEL +#define ULTIPANEL // // PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3) diff --git a/config/examples/WASP/PowerWASP/Configuration_adv.h b/config/examples/WASP/PowerWASP/Configuration_adv.h index 5335fa012a..e9a69b715a 100644 --- a/config/examples/WASP/PowerWASP/Configuration_adv.h +++ b/config/examples/WASP/PowerWASP/Configuration_adv.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "WASP/PowerWASP" + /** * Configuration_adv.h * @@ -427,7 +429,7 @@ // then extrude some filament every couple of SECONDS. //#define EXTRUDER_RUNOUT_PREVENT #if ENABLED(EXTRUDER_RUNOUT_PREVENT) - #define EXTRUDER_RUNOUT_MINTEMP 190 + #define EXTRUDER_RUNOUT_MINTEMP 180 #define EXTRUDER_RUNOUT_SECONDS 30 #define EXTRUDER_RUNOUT_SPEED 1500 // (mm/min) #define EXTRUDER_RUNOUT_EXTRUDE 5 // (mm) @@ -713,7 +715,7 @@ // Remember: you should set the second extruder x-offset to 0 in your slicer. // This is the default power-up mode which can be later using M605. - #define DEFAULT_DUAL_X_CARRIAGE_MODE DXC_AUTO_PARK_MODE + #define DEFAULT_DUAL_X_CARRIAGE_MODE DXC_FULL_CONTROL_MODE // Default x offset in duplication mode (typically set to half print bed width) #define DEFAULT_DUPLICATION_X_OFFSET 100 @@ -867,7 +869,7 @@ // On a 300mm bed a 5% grade would give a misalignment of ~1.5cm #define G34_MAX_GRADE 5 // (%) Maximum incline that G34 will handle - #define Z_STEPPER_ALIGN_ITERATIONS 5 // Number of iterations to apply during alignment + #define Z_STEPPER_ALIGN_ITERATIONS 3 // Number of iterations to apply during alignment #define Z_STEPPER_ALIGN_ACC 0.02 // Stop iterating early if the accuracy is better than this #define RESTORE_LEVELING_AFTER_G34 // Restore leveling after G34 is done? // After G34, re-home Z (G28 Z) or just calculate it from the last probe heights? @@ -1278,7 +1280,7 @@ // The standard SD detect circuit reads LOW when media is inserted and HIGH when empty. // Enable this option and set to HIGH if your SD cards are incorrectly detected. - //#define SD_DETECT_STATE HIGH + #define SD_DETECT_STATE LOW //#define SD_IGNORE_AT_STARTUP // Don't mount the SD card when starting up //#define SDCARD_READONLY // Read-only SD card (to save over 2K of flash) @@ -1288,7 +1290,7 @@ #define SD_PROCEDURE_DEPTH 1 // Increase if you need more nested M32 calls #define SD_FINISHED_STEPPERRELEASE true // Disable steppers when SD Print is finished - #define SD_FINISHED_RELEASECOMMAND "M84" // Use "M84XYE" to keep Z enabled so your bed stays in place + #define SD_FINISHED_RELEASECOMMAND "G1 Y190 Z190\nM84" // Use "M84XYE" to keep Z enabled so your bed stays in place // Reverse SD sort to show "more recent" files first, according to the card's FAT. // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended. @@ -1301,7 +1303,7 @@ //#define BROWSE_MEDIA_ON_INSERT // Open the file browser when media is inserted - #define EVENT_GCODE_SD_ABORT "G28XY" // G-code to run on SD Abort Print (e.g., "G28XY" or "G27") + #define EVENT_GCODE_SD_ABORT "G27" // G-code to run on SD Abort Print (e.g., "G28XY" or "G27") #if ENABLED(PRINTER_EVENT_LEDS) #define PE_LEDS_COMPLETED_TIME (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination @@ -1315,13 +1317,13 @@ * an option on the LCD screen to continue the print from the last-known * point in the file. */ - //#define POWER_LOSS_RECOVERY + #define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) //#define BACKUP_POWER_SUPPLY // Backup power / UPS to move the steppers on power loss //#define POWER_LOSS_ZRAISE 2 // (mm) Z axis raise on resume (on power loss with UPS) - //#define POWER_LOSS_PIN 44 // Pin to detect power loss. Set to -1 to disable default pin on boards without module. - //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss + #define POWER_LOSS_PIN 65 // Pin to detect power loss. Set to -1 to disable default pin on boards without module. + #define POWER_LOSS_STATE LOW // State of pin indicating power loss //#define POWER_LOSS_PULLUP // Set pullup / pulldown as appropriate for your sensor //#define POWER_LOSS_PULLDOWN //#define POWER_LOSS_PURGE_LEN 20 // (mm) Length of filament to purge on resume @@ -1790,7 +1792,7 @@ * * Warning: Does not respect endstops! */ -//#define BABYSTEPPING +#define BABYSTEPPING #if ENABLED(BABYSTEPPING) //#define INTEGRATED_BABYSTEPPING // EXPERIMENTAL integration of babystepping into the Stepper ISR //#define BABYSTEP_WITHOUT_HOMING @@ -1798,8 +1800,8 @@ //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way //#define BABYSTEP_MILLIMETER_UNITS // Specify BABYSTEP_MULTIPLICATOR_(XY|Z) in mm instead of micro-steps - #define BABYSTEP_MULTIPLICATOR_Z 1 // (steps or mm) Steps or millimeter distance for each Z babystep - #define BABYSTEP_MULTIPLICATOR_XY 1 // (steps or mm) Steps or millimeter distance for each XY babystep + #define BABYSTEP_MULTIPLICATOR_Z 10 // (steps or mm) Steps or millimeter distance for each Z babystep + #define BABYSTEP_MULTIPLICATOR_XY 10 // (steps or mm) Steps or millimeter distance for each Z babystep //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) @@ -2311,23 +2313,23 @@ * * Enable PARK_HEAD_ON_PAUSE to add the G-code M125 Pause and Park. */ -//#define ADVANCED_PAUSE_FEATURE +#define ADVANCED_PAUSE_FEATURE #if ENABLED(ADVANCED_PAUSE_FEATURE) #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. // This short retract is done immediately, before parking the nozzle. - #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast. + #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 20 // (mm/s) Unload filament feedrate. This can be pretty fast. #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload. + #define FILAMENT_CHANGE_UNLOAD_LENGTH 400 // (mm) The length of filament for a complete unload. // For Bowden, the full length of the tube and nozzle. // For direct drive, the full length of the nozzle. // Set to 0 for manual unloading. #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE 6 // (mm/s) Slow move when starting load. #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 0 // (mm) Slow length, to allow time to insert material. // 0 to disable start loading and skip to fast load only - #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast. + #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 20 // (mm/s) Load filament feedrate. This can be pretty fast. #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle. + #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 400 // (mm) Load length of filament, from extruder gear to nozzle. // For Bowden, the full length of the tube and nozzle. // For direct drive, the full length of the nozzle. //#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted. @@ -2346,13 +2348,13 @@ #define FILAMENT_UNLOAD_PURGE_FEEDRATE 25 // (mm/s) feedrate to purge before unload #define PAUSE_PARK_NOZZLE_TIMEOUT 45 // (seconds) Time limit before the nozzle is turned off for safety. - #define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed. + #define FILAMENT_CHANGE_ALERT_BEEPS 5 // Number of alert beeps to play when a response is needed. #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change. - //#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. + #define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. //#define HOME_BEFORE_FILAMENT_CHANGE // If needed, home before parking for filament change - //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. + #define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) #endif diff --git a/config/examples/Wanhao/Duplicator 4S/Configuration.h b/config/examples/Wanhao/Duplicator 4S/Configuration.h index 78c2dc9160..926471fdcc 100644 --- a/config/examples/Wanhao/Duplicator 4S/Configuration.h +++ b/config/examples/Wanhao/Duplicator 4S/Configuration.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Wanhao/Duplicator 4S" + /** * Configuration.h * @@ -69,7 +71,7 @@ // @section info // Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes. +#define STRING_CONFIG_H_AUTHOR "MakerHouse" // Who made the changes. //#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) /** @@ -134,11 +136,11 @@ // Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_RAMPS_14_EFB + #define MOTHERBOARD BOARD_MIGHTYBOARD_REVE #endif // Name displayed in the LCD "Ready" message and Info menu -//#define CUSTOM_MACHINE_NAME "3D Printer" +#define CUSTOM_MACHINE_NAME "CreatorPro 2x" // Printer's unique ID, used by some programs to differentiate between machines. // Choose your own or use a service like https://www.uuidgenerator.net/version4 @@ -148,7 +150,7 @@ // This defines the number of extruders // :[0, 1, 2, 3, 4, 5, 6, 7, 8] -#define EXTRUDERS 1 +#define EXTRUDERS 2 // Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc. #define DEFAULT_NOMINAL_FILAMENT_DIA 1.75 @@ -306,8 +308,8 @@ // Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing). // The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder). // For the other hotends it is their distance from the extruder 0 hotend. -//#define HOTEND_OFFSET_X { 0.0, 20.00 } // (mm) relative X-offset for each nozzle -//#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle +#define HOTEND_OFFSET_X { 0.0, -34.00 } // (mm) relative X-offset for each nozzle +//#define HOTEND_OFFSET_Y { 0.0, 0.00 } // (mm) relative Y-offset for each nozzle //#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle // @section machine @@ -416,15 +418,15 @@ * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. */ -#define TEMP_SENSOR_0 1 -#define TEMP_SENSOR_1 0 +#define TEMP_SENSOR_0 -2 +#define TEMP_SENSOR_1 -2 #define TEMP_SENSOR_2 0 #define TEMP_SENSOR_3 0 #define TEMP_SENSOR_4 0 #define TEMP_SENSOR_5 0 #define TEMP_SENSOR_6 0 #define TEMP_SENSOR_7 0 -#define TEMP_SENSOR_BED 0 +#define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 #define TEMP_SENSOR_COOLER 0 @@ -444,11 +446,11 @@ //#define TEMP_SENSOR_1_AS_REDUNDANT #define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10 -#define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 +#define TEMP_RESIDENCY_TIME 0 // (seconds) Time to wait for hotend to "settle" in M109 #define TEMP_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer #define TEMP_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target -#define TEMP_BED_RESIDENCY_TIME 10 // (seconds) Time to wait for bed to "settle" in M190 +#define TEMP_BED_RESIDENCY_TIME 0 // (seconds) Time to wait for bed to "settle" in M190 #define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer #define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target @@ -513,13 +515,13 @@ #if ENABLED(PID_PARAMS_PER_HOTEND) // Specify between 1 and HOTENDS values per array. // If fewer than EXTRUDER values are provided, the last element will be repeated. - #define DEFAULT_Kp_LIST { 22.20, 22.20 } - #define DEFAULT_Ki_LIST { 1.08, 1.08 } - #define DEFAULT_Kd_LIST { 114.00, 114.00 } + #define DEFAULT_Kp_LIST { 20.03, 20.03 } + #define DEFAULT_Ki_LIST { 1.22, 1.22 } + #define DEFAULT_Kd_LIST { 82.05, 82.05 } #else - #define DEFAULT_Kp 22.20 - #define DEFAULT_Ki 1.08 - #define DEFAULT_Kd 114.00 + #define DEFAULT_Kp 20.03 + #define DEFAULT_Ki 1.22 + #define DEFAULT_Kd 82.05 #endif #endif // PIDTEMP @@ -613,7 +615,7 @@ //#define PID_DEBUG // Sends debug data to the serial port. Use 'M303 D' to toggle activation. //#define PID_OPENLOOP // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX //#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay - #define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature + #define PID_FUNCTIONAL_RANGE 15 // If the temperature difference between the target temperature and the actual temperature // is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max. #endif @@ -655,7 +657,7 @@ #define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders #define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed -#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber +//#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber #define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling //=========================================================================== @@ -683,11 +685,11 @@ // Specify here all the endstop connectors that are connected to any endstop or probe. // Almost all printers will be using one per axis. Probes will use one or more of the // extra connectors. Leave undefined any used for non-endstop and non-probe purposes. -#define USE_XMIN_PLUG -#define USE_YMIN_PLUG +//#define USE_XMIN_PLUG +//#define USE_YMIN_PLUG #define USE_ZMIN_PLUG -//#define USE_XMAX_PLUG -//#define USE_YMAX_PLUG +#define USE_XMAX_PLUG +#define USE_YMAX_PLUG //#define USE_ZMAX_PLUG // Enable pullup for all endstops to prevent a floating state @@ -719,9 +721,9 @@ // Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). #define X_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. #define Y_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define X_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. +#define Z_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define X_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Y_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. #define Z_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. #define Z_MIN_PROBE_ENDSTOP_INVERTING false // Set to true to invert the logic of the probe. @@ -752,7 +754,7 @@ //#define Z3_DRIVER_TYPE A4988 //#define Z4_DRIVER_TYPE A4988 #define E0_DRIVER_TYPE A4988 -//#define E1_DRIVER_TYPE A4988 +#define E1_DRIVER_TYPE A4988 //#define E2_DRIVER_TYPE A4988 //#define E3_DRIVER_TYPE A4988 //#define E4_DRIVER_TYPE A4988 @@ -806,14 +808,16 @@ * Override with M92 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 500 } +// Really Sailfish... got enough precision on that float for an 8 bit system? +// I'm leaving this in for the sake of posterity. +#define DEFAULT_AXIS_STEPS_PER_UNIT { 94.139704, 94.139704, 400, 96.275201870333662468889989185642 } /** * Default Max Feed Rate (mm/s) * Override with M203 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 } +#define DEFAULT_MAX_FEEDRATE { 250, 250, 20, 100 } //#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 #if ENABLED(LIMITED_MAX_FR_EDITING) @@ -826,7 +830,7 @@ * Override with M201 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 } +#define DEFAULT_MAX_ACCELERATION { 1000, 1000, 100, 5000 } //#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 #if ENABLED(LIMITED_MAX_ACCEL_EDITING) @@ -841,9 +845,9 @@ * M204 R Retract Acceleration * M204 T Travel Acceleration */ -#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves +#define DEFAULT_ACCELERATION 250 // X, Y, Z and E acceleration for printing moves +#define DEFAULT_RETRACT_ACCELERATION 5000 // E acceleration for retracts +#define DEFAULT_TRAVEL_ACCELERATION 500 // X, Y, Z acceleration for travel (non printing) moves /** * Default Jerk limits (mm/s) @@ -867,7 +871,7 @@ #endif #endif -#define DEFAULT_EJERK 5.0 // May be used by Linear Advance +#define DEFAULT_EJERK 2.0 // May be used by Linear Advance /** * Junction Deviation Factor @@ -877,7 +881,7 @@ * https://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html */ #if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.013 // (mm) Distance from real junction edge + #define JUNCTION_DEVIATION_MM 0.64 // (mm) Distance from real junction edge #define JD_HANDLE_SMALL_SEGMENTS // Use curvature estimation instead of just the junction angle // for small segments (< 1mm) with large junction angles (> 135°). #endif @@ -1190,14 +1194,14 @@ // @section machine // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR false +#define INVERT_X_DIR true #define INVERT_Y_DIR true -#define INVERT_Z_DIR false +#define INVERT_Z_DIR true // @section extruder // For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR false +#define INVERT_E0_DIR true #define INVERT_E1_DIR false #define INVERT_E2_DIR false #define INVERT_E3_DIR false @@ -1216,7 +1220,7 @@ * - Use a low value (i.e., Z_MIN_POS) if the nozzle falls down to the bed. * - Use a large value (i.e., Z_MAX_POS) if the bed falls down, away from the nozzle. */ -//#define Z_IDLE_HEIGHT Z_HOME_POS +#define Z_IDLE_HEIGHT Z_MAX_POS //#define Z_HOMING_HEIGHT 4 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ... // Be sure to have this much clearance over your Z_MAX_POS to prevent grinding. @@ -1225,23 +1229,23 @@ // Direction of endstops when homing; 1=MAX, -1=MIN // :[-1,1] -#define X_HOME_DIR -1 -#define Y_HOME_DIR -1 +#define X_HOME_DIR 1 +#define Y_HOME_DIR 1 #define Z_HOME_DIR -1 // @section machine // The size of the printable area -#define X_BED_SIZE 200 -#define Y_BED_SIZE 200 +#define X_BED_SIZE 230 +#define Y_BED_SIZE 150 // Travel limits (mm) after homing, corresponding to endstop positions. #define X_MIN_POS 0 #define Y_MIN_POS 0 #define Z_MIN_POS 0 -#define X_MAX_POS X_BED_SIZE -#define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 200 +#define X_MAX_POS 265 +#define Y_MAX_POS 150 +#define Z_MAX_POS 150 /** * Software Endstops @@ -1570,7 +1574,7 @@ // @section homing // The center of the bed is at (X=0, Y=0) -//#define BED_CENTER_AT_0_0 +#define BED_CENTER_AT_0_0 // Manually set the home position. Leave these undefined for automatic settings. // For DELTA this is the top-center of the Cartesian print volume. @@ -1672,12 +1676,12 @@ * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) */ -//#define EEPROM_SETTINGS // Persistent storage with M500 and M501 -//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! +#define EEPROM_SETTINGS // Persistent storage with M500 and M501 +#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. #define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load #if ENABLED(EEPROM_SETTINGS) - //#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. + #define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. #endif // @@ -1706,14 +1710,14 @@ // Preheat Constants - Up to 5 are supported without changes // #define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 180 -#define PREHEAT_1_TEMP_BED 70 +#define PREHEAT_1_TEMP_HOTEND 200 +#define PREHEAT_1_TEMP_BED 50 #define PREHEAT_1_TEMP_CHAMBER 35 #define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 #define PREHEAT_2_LABEL "ABS" -#define PREHEAT_2_TEMP_HOTEND 240 -#define PREHEAT_2_TEMP_BED 110 +#define PREHEAT_2_TEMP_HOTEND 220 +#define PREHEAT_2_TEMP_BED 100 #define PREHEAT_2_TEMP_CHAMBER 35 #define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 @@ -1728,11 +1732,11 @@ * P1 Raise the nozzle always to Z-park height. * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. */ -//#define NOZZLE_PARK_FEATURE +#define NOZZLE_PARK_FEATURE #if ENABLED(NOZZLE_PARK_FEATURE) // Specify a park position as { X, Y, Z_raise } - #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 } + #define NOZZLE_PARK_POINT { (X_MAX_POS - 10), (Y_MAX_POS - 10), 20 } //#define NOZZLE_PARK_X_ONLY // X move only is required to park //#define NOZZLE_PARK_Y_ONLY // Y move only is required to park #define NOZZLE_PARK_Z_RAISE_MIN 2 // (mm) Always raise Z by at least this distance @@ -1845,7 +1849,7 @@ * * View the current statistics with M78. */ -//#define PRINTCOUNTER +#define PRINTCOUNTER #if ENABLED(PRINTCOUNTER) #define PRINTCOUNTER_SAVE_INTERVAL 60 // (minutes) EEPROM save interval during print #endif @@ -1936,14 +1940,14 @@ * SD Card support is disabled by default. If your controller has an SD slot, * you must uncomment the following option or it won't work. */ -//#define SDSUPPORT +#define SDSUPPORT /** * SD CARD: ENABLE CRC * * Use CRC checks and retries on the SD communication. */ -//#define SD_CHECK_AND_RETRY +#define SD_CHECK_AND_RETRY /** * LCD Menu Items @@ -1952,7 +1956,7 @@ * just remove some extraneous menu items to recover space. */ //#define NO_LCD_MENUS -//#define SLIM_LCD_MENUS +#define SLIM_LCD_MENUS // // ENCODER SETTINGS @@ -1991,7 +1995,7 @@ // If CLOCKWISE normally moves DOWN this makes it go UP. // If CLOCKWISE normally moves UP this makes it go DOWN. // -//#define REVERSE_MENU_DIRECTION +#define REVERSE_MENU_DIRECTION // // This option reverses the encoder direction for Select Screen. @@ -2167,7 +2171,7 @@ // https://github.com/mikeshub/SailfishLCD // Uses the code directly from Sailfish // -//#define FF_INTERFACEBOARD +#define FF_INTERFACEBOARD // // TFT GLCD Panel with Marlin UI diff --git a/config/examples/Wanhao/Duplicator 4S/Configuration_adv.h b/config/examples/Wanhao/Duplicator 4S/Configuration_adv.h index 5335fa012a..254c28359c 100644 --- a/config/examples/Wanhao/Duplicator 4S/Configuration_adv.h +++ b/config/examples/Wanhao/Duplicator 4S/Configuration_adv.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Wanhao/Duplicator 4S" + /** * Configuration_adv.h * @@ -258,7 +260,7 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 20 // Seconds + #define WATCH_TEMP_PERIOD 60 // Seconds #define WATCH_TEMP_INCREASE 2 // Degrees Celsius #endif @@ -266,7 +268,7 @@ * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_BED_PERIOD 60 // Seconds #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius /** @@ -540,8 +542,8 @@ * Multiple extruders can be assigned to the same pin in which case * the fan will turn on when any selected extruder is above the threshold. */ -#define E0_AUTO_FAN_PIN -1 -#define E1_AUTO_FAN_PIN -1 +#define E0_AUTO_FAN_PIN EX1_FAN_PIN +#define E1_AUTO_FAN_PIN EX2_FAN_PIN #define E2_AUTO_FAN_PIN -1 #define E3_AUTO_FAN_PIN -1 #define E4_AUTO_FAN_PIN -1 @@ -741,7 +743,7 @@ //#define HOMING_BACKOFF_POST_MM { 2, 2, 2 } // (mm) Backoff from endstops after homing -//#define QUICK_HOME // If G28 contains XY do a diagonal move first +#define QUICK_HOME // If G28 contains XY do a diagonal move first //#define HOME_Y_BEFORE_X // If G28 contains XY home Y before X //#define HOME_Z_FIRST // Home Z first. Requires a Z-MIN endstop (not a probe). //#define CODEPENDENT_XY_HOMING // If X/Y can't home without homing Y/X first @@ -928,7 +930,7 @@ #define DEFAULT_STEPPER_DEACTIVE_TIME 120 #define DISABLE_INACTIVE_X true #define DISABLE_INACTIVE_Y true -#define DISABLE_INACTIVE_Z true // Set 'false' if the nozzle could fall onto your printed part! +#define DISABLE_INACTIVE_Z false // Set 'false' if the nozzle could fall onto your printed part! #define DISABLE_INACTIVE_E true // Default Minimum Feedrates for printing and travel moves @@ -1102,14 +1104,14 @@ /** * I2C-based DIGIPOTs (e.g., Azteeg X3 Pro) */ -//#define DIGIPOT_MCP4018 // Requires https://github.com/felias-fogg/SlowSoftI2CMaster +#define DIGIPOT_MCP4018 // Requires https://github.com/felias-fogg/SlowSoftI2CMaster //#define DIGIPOT_MCP4451 #if EITHER(DIGIPOT_MCP4018, DIGIPOT_MCP4451) - #define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT:4 AZTEEG_X3_PRO:8 MKS_SBASE:5 MIGHTYBOARD_REVE:5 + #define DIGIPOT_I2C_NUM_CHANNELS 5 // 5DPRINT:4 AZTEEG_X3_PRO:8 MKS_SBASE:5 MIGHTYBOARD_REVE:5 // Actual motor currents in Amps. The number of entries must match DIGIPOT_I2C_NUM_CHANNELS. // These correspond to the physical drivers, so be mindful if the order is changed. - #define DIGIPOT_I2C_MOTOR_CURRENTS { 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0 } // AZTEEG_X3_PRO + #define DIGIPOT_I2C_MOTOR_CURRENTS { 0.84, 0.84, 0.4, 1.0, 1.0 } // MIGHTYBOARD_REVE //#define DIGIPOT_USE_RAW_VALUES // Use DIGIPOT_MOTOR_CURRENT raw wiper values (instead of A4988 motor currents) @@ -1123,7 +1125,7 @@ * AZTEEG_X5_MINI_WIFI 0x58 0x5C MCP4451 * MIGHTYBOARD_REVE 0x2F (0x5E) MCP4018 */ - //#define DIGIPOT_I2C_ADDRESS_A 0x2C // Unshifted slave address for first DIGIPOT + #define DIGIPOT_I2C_ADDRESS_A 0x2F // Unshifted slave address for first DIGIPOT //#define DIGIPOT_I2C_ADDRESS_B 0x2D // Unshifted slave address for second DIGIPOT #endif @@ -1138,7 +1140,7 @@ #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines #if IS_ULTIPANEL #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position" - #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen + //#define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen #endif #endif @@ -1301,7 +1303,7 @@ //#define BROWSE_MEDIA_ON_INSERT // Open the file browser when media is inserted - #define EVENT_GCODE_SD_ABORT "G28XY" // G-code to run on SD Abort Print (e.g., "G28XY" or "G27") + #define EVENT_GCODE_SD_ABORT "G27" // G-code to run on SD Abort Print (e.g., "G28XY" or "G27") #if ENABLED(PRINTER_EVENT_LEDS) #define PE_LEDS_COMPLETED_TIME (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination @@ -1982,7 +1984,7 @@ // // G2/G3 Arc Support // -#define ARC_SUPPORT // Disable this feature to save ~3226 bytes +//#define ARC_SUPPORT // Disable this feature to save ~3226 bytes #if ENABLED(ARC_SUPPORT) #define MM_PER_ARC_SEGMENT 1 // (mm) Length (or minimum length) of each arc segment //#define ARC_SEGMENTS_PER_R 1 // Max segment length, MM_PER = Min @@ -2311,19 +2313,19 @@ * * Enable PARK_HEAD_ON_PAUSE to add the G-code M125 Pause and Park. */ -//#define ADVANCED_PAUSE_FEATURE +#define ADVANCED_PAUSE_FEATURE #if ENABLED(ADVANCED_PAUSE_FEATURE) #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. // This short retract is done immediately, before parking the nozzle. #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast. #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload. + #define FILAMENT_CHANGE_UNLOAD_LENGTH 80 // (mm) The length of filament for a complete unload. // For Bowden, the full length of the tube and nozzle. // For direct drive, the full length of the nozzle. // Set to 0 for manual unloading. #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE 6 // (mm/s) Slow move when starting load. - #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 0 // (mm) Slow length, to allow time to insert material. + #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 80 // (mm) Slow length, to allow time to insert material. // 0 to disable start loading and skip to fast load only #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast. #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. @@ -2349,10 +2351,10 @@ #define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed. #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change. - //#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. + #define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. //#define HOME_BEFORE_FILAMENT_CHANGE // If needed, home before parking for filament change - //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. + #define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) #endif diff --git a/config/examples/Wanhao/Duplicator 6/Configuration.h b/config/examples/Wanhao/Duplicator 6/Configuration.h index 78c2dc9160..4152cc1c42 100644 --- a/config/examples/Wanhao/Duplicator 6/Configuration.h +++ b/config/examples/Wanhao/Duplicator 6/Configuration.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Wanhao/Duplicator 6" + /** * Configuration.h * @@ -69,7 +71,7 @@ // @section info // Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes. +#define STRING_CONFIG_H_AUTHOR "(Rob Mendon, default config)" // Who made the changes. //#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) /** @@ -134,11 +136,11 @@ // Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_RAMPS_14_EFB + #define MOTHERBOARD BOARD_ULTIMAIN_2 #endif // Name displayed in the LCD "Ready" message and Info menu -//#define CUSTOM_MACHINE_NAME "3D Printer" +#define CUSTOM_MACHINE_NAME "Duplicator 6" // Printer's unique ID, used by some programs to differentiate between machines. // Choose your own or use a service like https://www.uuidgenerator.net/version4 @@ -416,7 +418,7 @@ * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. */ -#define TEMP_SENSOR_0 1 +#define TEMP_SENSOR_0 20 #define TEMP_SENSOR_1 0 #define TEMP_SENSOR_2 0 #define TEMP_SENSOR_3 0 @@ -424,7 +426,7 @@ #define TEMP_SENSOR_5 0 #define TEMP_SENSOR_6 0 #define TEMP_SENSOR_7 0 -#define TEMP_SENSOR_BED 0 +#define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 #define TEMP_SENSOR_COOLER 0 @@ -472,7 +474,7 @@ // Above this temperature the heater will be switched off. // This can protect components from overheating, but NOT from shorts and failures. // (Use MINTEMP for thermistor short/failure protection.) -#define HEATER_0_MAXTEMP 275 +#define HEATER_0_MAXTEMP 260 #define HEATER_1_MAXTEMP 275 #define HEATER_2_MAXTEMP 275 #define HEATER_3_MAXTEMP 275 @@ -480,7 +482,7 @@ #define HEATER_5_MAXTEMP 275 #define HEATER_6_MAXTEMP 275 #define HEATER_7_MAXTEMP 275 -#define BED_MAXTEMP 150 +#define BED_MAXTEMP 120 #define CHAMBER_MAXTEMP 60 /** @@ -505,21 +507,22 @@ #define PID_K1 0.95 // Smoothing factor within any PID loop #if ENABLED(PIDTEMP) - //#define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) - //#define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) + #define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) + #define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) // Set/get with gcode: M301 E[extruder number, 0-2] + // Duplicator 6 #if ENABLED(PID_PARAMS_PER_HOTEND) // Specify between 1 and HOTENDS values per array. // If fewer than EXTRUDER values are provided, the last element will be repeated. - #define DEFAULT_Kp_LIST { 22.20, 22.20 } - #define DEFAULT_Ki_LIST { 1.08, 1.08 } - #define DEFAULT_Kd_LIST { 114.00, 114.00 } + #define DEFAULT_Kp_LIST { 9.12, 9.12 } + #define DEFAULT_Ki_LIST { 0.41, 0.41 } + #define DEFAULT_Kd_LIST { 50.98, 50.98 } #else - #define DEFAULT_Kp 22.20 - #define DEFAULT_Ki 1.08 - #define DEFAULT_Kd 114.00 + #define DEFAULT_Kp 9.12 + #define DEFAULT_Ki 0.41 + #define DEFAULT_Kd 50.98 #endif #endif // PIDTEMP @@ -540,7 +543,7 @@ * heater. If your configuration is significantly different than this and you don't understand * the issues involved, don't use bed PID until someone else verifies that your hardware works. */ -//#define PIDTEMPBED +#define PIDTEMPBED //#define BED_LIMIT_SWITCHING @@ -556,11 +559,10 @@ //#define MIN_BED_POWER 0 //#define PID_BED_DEBUG // Sends debug data to the serial port. - // 120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - // from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) - #define DEFAULT_bedKp 10.00 - #define DEFAULT_bedKi .023 - #define DEFAULT_bedKd 305.4 + // Duplicator 6 + #define DEFAULT_bedKp 124.55 + #define DEFAULT_bedKi 23.46 + #define DEFAULT_bedKd 165.29 // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. #endif // PIDTEMPBED @@ -717,9 +719,9 @@ #endif // Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. +#define X_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Y_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Z_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. #define X_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. #define Y_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. #define Z_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. @@ -806,7 +808,7 @@ * Override with M92 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 500 } +#define DEFAULT_AXIS_STEPS_PER_UNIT { 80.0395, 80.0395, 400.48, 99.1 } /** * Default Max Feed Rate (mm/s) @@ -826,7 +828,7 @@ * Override with M201 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 } +#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 500 } //#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 #if ENABLED(LIMITED_MAX_ACCEL_EDITING) @@ -841,8 +843,8 @@ * M204 R Retract Acceleration * M204 T Travel Acceleration */ -#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts +#define DEFAULT_ACCELERATION 1500 // X, Y, Z and E acceleration for printing moves +#define DEFAULT_RETRACT_ACCELERATION 1500 // E acceleration for retracts #define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves /** @@ -867,7 +869,7 @@ #endif #endif -#define DEFAULT_EJERK 5.0 // May be used by Linear Advance +#define DEFAULT_EJERK 1.0 // May be used by Linear Advance /** * Junction Deviation Factor @@ -877,7 +879,7 @@ * https://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html */ #if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.013 // (mm) Distance from real junction edge + #define JUNCTION_DEVIATION_MM 0.027 // (mm) Distance from real junction edge #define JD_HANDLE_SMALL_SEGMENTS // Use curvature estimation instead of just the junction angle // for small segments (< 1mm) with large junction angles (> 135°). #endif @@ -906,7 +908,7 @@ * The probe replaces the Z-MIN endstop and is used for Z homing. * (Automatically enables USE_PROBE_FOR_Z_HOMING.) */ -#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN +//#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN // Force the use of the probe for Z-axis homing //#define USE_PROBE_FOR_Z_HOMING @@ -1190,14 +1192,14 @@ // @section machine // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR false -#define INVERT_Y_DIR true -#define INVERT_Z_DIR false +#define INVERT_X_DIR true +#define INVERT_Y_DIR false +#define INVERT_Z_DIR true // @section extruder // For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR false +#define INVERT_E0_DIR true #define INVERT_E1_DIR false #define INVERT_E2_DIR false #define INVERT_E3_DIR false @@ -1209,7 +1211,7 @@ // @section homing //#define NO_MOTION_BEFORE_HOMING // Inhibit movement until all axes have been homed. Also enable HOME_AFTER_DEACTIVATE for extra safety. -//#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated. Also enable NO_MOTION_BEFORE_HOMING for extra safety. +#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated. Also enable NO_MOTION_BEFORE_HOMING for extra safety. /** * Set Z_IDLE_HEIGHT if the Z-Axis moves on its own when steppers are disabled. @@ -1241,7 +1243,7 @@ #define Z_MIN_POS 0 #define X_MAX_POS X_BED_SIZE #define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 200 +#define Z_MAX_POS 170 /** * Software Endstops @@ -1672,7 +1674,7 @@ * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) */ -//#define EEPROM_SETTINGS // Persistent storage with M500 and M501 +#define EEPROM_SETTINGS // Persistent storage with M500 and M501 //#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. #define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load @@ -1728,7 +1730,7 @@ * P1 Raise the nozzle always to Z-park height. * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. */ -//#define NOZZLE_PARK_FEATURE +#define NOZZLE_PARK_FEATURE #if ENABLED(NOZZLE_PARK_FEATURE) // Specify a park position as { X, Y, Z_raise } @@ -1845,7 +1847,7 @@ * * View the current statistics with M78. */ -//#define PRINTCOUNTER +#define PRINTCOUNTER #if ENABLED(PRINTCOUNTER) #define PRINTCOUNTER_SAVE_INTERVAL 60 // (minutes) EEPROM save interval during print #endif @@ -1936,7 +1938,7 @@ * SD Card support is disabled by default. If your controller has an SD slot, * you must uncomment the following option or it won't work. */ -//#define SDSUPPORT +#define SDSUPPORT /** * SD CARD: ENABLE CRC @@ -1960,13 +1962,13 @@ // This option overrides the default number of encoder pulses needed to // produce one step. Should be increased for high-resolution encoders. // -//#define ENCODER_PULSES_PER_STEP 4 +#define ENCODER_PULSES_PER_STEP 2 // // Use this option to override the number of step signals required to // move between next/prev menu items. // -//#define ENCODER_STEPS_PER_MENU_ITEM 1 +#define ENCODER_STEPS_PER_MENU_ITEM 1 /** * Encoder Direction Options @@ -1983,7 +1985,7 @@ // // Set this option if CLOCKWISE causes values to DECREASE // -//#define REVERSE_ENCODER_DIRECTION +#define REVERSE_ENCODER_DIRECTION // // This option reverses the encoder direction for navigating LCD menus. @@ -2006,7 +2008,7 @@ // // Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. // -//#define INDIVIDUAL_AXIS_HOMING_MENU +#define INDIVIDUAL_AXIS_HOMING_MENU // // SPEAKER/BUZZER @@ -2014,7 +2016,7 @@ // If you have a speaker that can produce tones, enable it here. // By default Marlin assumes you have a buzzer with a fixed frequency. // -//#define SPEAKER +#define SPEAKER // // The duration and frequency for the UI feedback sound. @@ -2023,8 +2025,8 @@ // Note: Test audio output with the G-Code: // M300 S P // -//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 -//#define LCD_FEEDBACK_FREQUENCY_HZ 5000 +#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 5 +#define LCD_FEEDBACK_FREQUENCY_HZ 1000 //============================================================================= //======================== LCD / Controller Selection ========================= @@ -2337,7 +2339,8 @@ // // TinyBoy2 128x64 OLED / Encoder Panel // -//#define OLED_PANEL_TINYBOY2 +#define OLED_PANEL_TINYBOY2 +#define LCD_RESET_PIN 5 // // MKS OLED 1.3" 128×64 Full Graphics Controller @@ -2645,7 +2648,7 @@ //#define BLINKM // Support for PCA9632 PWM LED driver -//#define PCA9632 +#define PCA9632 // Support for PCA9533 PWM LED driver //#define PCA9533 diff --git a/config/examples/Wanhao/Duplicator 6/Configuration_adv.h b/config/examples/Wanhao/Duplicator 6/Configuration_adv.h index 5335fa012a..f7e6003a9d 100644 --- a/config/examples/Wanhao/Duplicator 6/Configuration_adv.h +++ b/config/examples/Wanhao/Duplicator 6/Configuration_adv.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Wanhao/Duplicator 6" + /** * Configuration_adv.h * @@ -238,7 +240,7 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds + #define THERMAL_PROTECTION_PERIOD 60 // Seconds #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius //#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops @@ -258,7 +260,7 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 20 // Seconds + #define WATCH_TEMP_PERIOD 40 // Seconds #define WATCH_TEMP_INCREASE 2 // Degrees Celsius #endif @@ -266,13 +268,13 @@ * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_BED_PERIOD 90 // Seconds #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds + #define WATCH_BED_TEMP_PERIOD 90 // Seconds #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius #endif @@ -573,15 +575,15 @@ /** * M355 Case Light on-off / brightness */ -//#define CASE_LIGHT_ENABLE +#define CASE_LIGHT_ENABLE #if ENABLED(CASE_LIGHT_ENABLE) - //#define CASE_LIGHT_PIN 4 // Override the default pin if needed + #define CASE_LIGHT_PIN 8 // Override the default pin if needed #define INVERT_CASE_LIGHT false // Set true if Case Light is ON when pin is LOW #define CASE_LIGHT_DEFAULT_ON true // Set default power-up state on - #define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // Set default power-up brightness (0-255, requires PWM pin) + #define CASE_LIGHT_DEFAULT_BRIGHTNESS 255 // Set default power-up brightness (0-255, requires PWM pin) //#define CASE_LIGHT_NO_BRIGHTNESS // Disable brightness control. Enable for non-PWM lighting. //#define CASE_LIGHT_MAX_PWM 128 // Limit PWM duty cycle (0-255) - //#define CASE_LIGHT_MENU // Add Case Light options to the LCD menu + #define CASE_LIGHT_MENU // Add Case Light options to the LCD menu #if ENABLED(NEOPIXEL_LED) //#define CASE_LIGHT_USE_NEOPIXEL // Use NeoPixel LED as case light #endif @@ -741,7 +743,7 @@ //#define HOMING_BACKOFF_POST_MM { 2, 2, 2 } // (mm) Backoff from endstops after homing -//#define QUICK_HOME // If G28 contains XY do a diagonal move first +#define QUICK_HOME // If G28 contains XY do a diagonal move first //#define HOME_Y_BEFORE_X // If G28 contains XY home Y before X //#define HOME_Z_FIRST // Home Z first. Requires a Z-MIN endstop (not a probe). //#define CODEPENDENT_XY_HOMING // If X/Y can't home without homing Y/X first @@ -867,7 +869,7 @@ // On a 300mm bed a 5% grade would give a misalignment of ~1.5cm #define G34_MAX_GRADE 5 // (%) Maximum incline that G34 will handle - #define Z_STEPPER_ALIGN_ITERATIONS 5 // Number of iterations to apply during alignment + #define Z_STEPPER_ALIGN_ITERATIONS 3 // Number of iterations to apply during alignment #define Z_STEPPER_ALIGN_ACC 0.02 // Stop iterating early if the accuracy is better than this #define RESTORE_LEVELING_AFTER_G34 // Restore leveling after G34 is done? // After G34, re-home Z (G28 Z) or just calculate it from the last probe heights? @@ -1095,7 +1097,9 @@ * M908 - BQ_ZUM_MEGA_3D, RAMBO, PRINTRBOARD_REVF, RIGIDBOARD_V2 & SCOOVO_X9H * M909, M910 & LCD - only PRINTRBOARD_REVF & RIGIDBOARD_V2 */ -//#define PWM_MOTOR_CURRENT { 1300, 1300, 1250 } // Values in milliamps +// Motor current PWM conversion, PWM value = MotorCurrentSetting * 255 / range +#define MOTOR_CURRENT_PWM_RANGE 2782 +#define PWM_MOTOR_CURRENT { 1200, 1200, 1000 } // Values in milliamps //#define DIGIPOT_MOTOR_CURRENT { 135,135,135,135,135 } // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A) //#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis @@ -1134,7 +1138,7 @@ // @section lcd #if EITHER(IS_ULTIPANEL, EXTENSIBLE_UI) - #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel + #define MANUAL_FEEDRATE { 70*60, 70*60, 15*60, 6*60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines #if IS_ULTIPANEL #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position" @@ -1175,7 +1179,7 @@ #endif // Include a page of printer information in the LCD Main Menu - //#define LCD_INFO_MENU + #define LCD_INFO_MENU #if ENABLED(LCD_INFO_MENU) //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages #endif @@ -1219,7 +1223,7 @@ #if HAS_DISPLAY // The timeout (in ms) to return to the status screen from sub-menus - //#define LCD_TIMEOUT_TO_STATUS 15000 + #define LCD_TIMEOUT_TO_STATUS 60000 #if ENABLED(SHOW_BOOTSCREEN) #define BOOTSCREEN_TIMEOUT 4000 // (ms) Total Duration to display the boot screen(s) @@ -1301,7 +1305,7 @@ //#define BROWSE_MEDIA_ON_INSERT // Open the file browser when media is inserted - #define EVENT_GCODE_SD_ABORT "G28XY" // G-code to run on SD Abort Print (e.g., "G28XY" or "G27") + #define EVENT_GCODE_SD_ABORT "G27" // G-code to run on SD Abort Print (e.g., "G28XY" or "G27") #if ENABLED(PRINTER_EVENT_LEDS) #define PE_LEDS_COMPLETED_TIME (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination @@ -1516,10 +1520,10 @@ // Save many cycles by drawing a hollow frame or no frame on the Info Screen //#define XYZ_NO_FRAME - #define XYZ_HOLLOW_FRAME + //#define XYZ_HOLLOW_FRAME // Enable to save many cycles by drawing a hollow frame on Menu Screens - #define MENU_HOLLOW_FRAME + //#define MENU_HOLLOW_FRAME // A bigger font is available for edit items. Costs 3120 bytes of PROGMEM. // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. @@ -1527,7 +1531,7 @@ // A smaller font may be used on the Info Screen. Costs 2434 bytes of PROGMEM. // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. - //#define USE_SMALL_INFOFONT + #define USE_SMALL_INFOFONT // Swap the CW/CCW indicators in the graphics overlay //#define OVERLAY_GFX_REVERSE @@ -1790,7 +1794,7 @@ * * Warning: Does not respect endstops! */ -//#define BABYSTEPPING +#define BABYSTEPPING #if ENABLED(BABYSTEPPING) //#define INTEGRATED_BABYSTEPPING // EXPERIMENTAL integration of babystepping into the Stepper ISR //#define BABYSTEP_WITHOUT_HOMING @@ -1801,7 +1805,7 @@ #define BABYSTEP_MULTIPLICATOR_Z 1 // (steps or mm) Steps or millimeter distance for each Z babystep #define BABYSTEP_MULTIPLICATOR_XY 1 // (steps or mm) Steps or millimeter distance for each XY babystep - //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. + #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. // Note: Extra time may be added to mitigate controller latency. @@ -1837,10 +1841,10 @@ * * See https://marlinfw.org/docs/features/lin_advance.html for full instructions. */ -//#define LIN_ADVANCE +#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) //#define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants - #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed + #define LIN_ADVANCE_K 0.00 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // If enabled, this will generate debug information output over USB. //#define EXPERIMENTAL_SCURVE // Enable this option to permit S-Curve Acceleration #endif @@ -2311,7 +2315,7 @@ * * Enable PARK_HEAD_ON_PAUSE to add the G-code M125 Pause and Park. */ -//#define ADVANCED_PAUSE_FEATURE +#define ADVANCED_PAUSE_FEATURE #if ENABLED(ADVANCED_PAUSE_FEATURE) #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. diff --git a/config/examples/Wanhao/Duplicator i3 2.1/Configuration.h b/config/examples/Wanhao/Duplicator i3 2.1/Configuration.h index 78c2dc9160..13f72af11b 100644 --- a/config/examples/Wanhao/Duplicator i3 2.1/Configuration.h +++ b/config/examples/Wanhao/Duplicator i3 2.1/Configuration.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Wanhao/Duplicator i3 2.1" + /** * Configuration.h * @@ -69,7 +71,7 @@ // @section info // Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes. +#define STRING_CONFIG_H_AUTHOR "(Matthew Piercey, Bot-In-a-Box Educational Robotics)" // Who made the changes. //#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) /** @@ -87,7 +89,7 @@ #define SHOW_BOOTSCREEN // Show the bitmap in Marlin/_Bootscreen.h on startup. -//#define SHOW_CUSTOM_BOOTSCREEN +#define SHOW_CUSTOM_BOOTSCREEN // Show the bitmap in Marlin/_Statusscreen.h on the status screen. //#define CUSTOM_STATUS_SCREEN_IMAGE @@ -134,11 +136,11 @@ // Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_RAMPS_14_EFB + #define MOTHERBOARD BOARD_MELZI #endif // Name displayed in the LCD "Ready" message and Info menu -//#define CUSTOM_MACHINE_NAME "3D Printer" +#define CUSTOM_MACHINE_NAME "Wanhao i3" // Printer's unique ID, used by some programs to differentiate between machines. // Choose your own or use a service like https://www.uuidgenerator.net/version4 @@ -416,7 +418,7 @@ * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. */ -#define TEMP_SENSOR_0 1 +#define TEMP_SENSOR_0 99 #define TEMP_SENSOR_1 0 #define TEMP_SENSOR_2 0 #define TEMP_SENSOR_3 0 @@ -424,7 +426,7 @@ #define TEMP_SENSOR_5 0 #define TEMP_SENSOR_6 0 #define TEMP_SENSOR_7 0 -#define TEMP_SENSOR_BED 0 +#define TEMP_SENSOR_BED 99 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 #define TEMP_SENSOR_COOLER 0 @@ -472,15 +474,15 @@ // Above this temperature the heater will be switched off. // This can protect components from overheating, but NOT from shorts and failures. // (Use MINTEMP for thermistor short/failure protection.) -#define HEATER_0_MAXTEMP 275 -#define HEATER_1_MAXTEMP 275 -#define HEATER_2_MAXTEMP 275 -#define HEATER_3_MAXTEMP 275 -#define HEATER_4_MAXTEMP 275 -#define HEATER_5_MAXTEMP 275 -#define HEATER_6_MAXTEMP 275 -#define HEATER_7_MAXTEMP 275 -#define BED_MAXTEMP 150 +#define HEATER_0_MAXTEMP 260 +#define HEATER_1_MAXTEMP 260 +#define HEATER_2_MAXTEMP 260 +#define HEATER_3_MAXTEMP 260 +#define HEATER_4_MAXTEMP 260 +#define HEATER_5_MAXTEMP 260 +#define HEATER_6_MAXTEMP 260 +#define HEATER_7_MAXTEMP 260 +#define BED_MAXTEMP 100 #define CHAMBER_MAXTEMP 60 /** @@ -510,16 +512,17 @@ //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) // Set/get with gcode: M301 E[extruder number, 0-2] + // Wanhao Duplicator i3 #if ENABLED(PID_PARAMS_PER_HOTEND) // Specify between 1 and HOTENDS values per array. // If fewer than EXTRUDER values are provided, the last element will be repeated. - #define DEFAULT_Kp_LIST { 22.20, 22.20 } - #define DEFAULT_Ki_LIST { 1.08, 1.08 } - #define DEFAULT_Kd_LIST { 114.00, 114.00 } + #define DEFAULT_Kp_LIST { 29.0, 29.0 } + #define DEFAULT_Ki_LIST { 2.0, 2.0 } + #define DEFAULT_Kd_LIST { 97.0, 97.0 } #else - #define DEFAULT_Kp 22.20 - #define DEFAULT_Ki 1.08 - #define DEFAULT_Kd 114.00 + #define DEFAULT_Kp 29.0 + #define DEFAULT_Ki 2.0 + #define DEFAULT_Kd 97.0 #endif #endif // PIDTEMP @@ -556,11 +559,10 @@ //#define MIN_BED_POWER 0 //#define PID_BED_DEBUG // Sends debug data to the serial port. - // 120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - // from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) - #define DEFAULT_bedKp 10.00 - #define DEFAULT_bedKi .023 - #define DEFAULT_bedKd 305.4 + // Wanhao Duplicator i3 + #define DEFAULT_bedKp 249.52 + #define DEFAULT_bedKi 47.89 + #define DEFAULT_bedKd 325.03 // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. #endif // PIDTEMPBED @@ -717,9 +719,9 @@ #endif // Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. +#define X_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Y_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Z_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. #define X_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. #define Y_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. #define Z_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. @@ -806,14 +808,14 @@ * Override with M92 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 500 } +#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 100 } /** * Default Max Feed Rate (mm/s) * Override with M203 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 } +#define DEFAULT_MAX_FEEDRATE { 700, 700, 100, 10000 } //#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 #if ENABLED(LIMITED_MAX_FR_EDITING) @@ -841,9 +843,9 @@ * M204 R Retract Acceleration * M204 T Travel Acceleration */ -#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves +#define DEFAULT_ACCELERATION 700 // X, Y, Z and E acceleration for printing moves #define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves +#define DEFAULT_TRAVEL_ACCELERATION 700 // X, Y, Z acceleration for travel (non printing) moves /** * Default Jerk limits (mm/s) @@ -855,9 +857,9 @@ */ //#define CLASSIC_JERK #if ENABLED(CLASSIC_JERK) - #define DEFAULT_XJERK 10.0 - #define DEFAULT_YJERK 10.0 - #define DEFAULT_ZJERK 0.3 + #define DEFAULT_XJERK 8.0 + #define DEFAULT_YJERK 8.0 + #define DEFAULT_ZJERK 0.4 //#define TRAVEL_EXTRA_XYJERK 0.0 // Additional jerk allowance for all travel moves @@ -877,7 +879,7 @@ * https://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html */ #if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.013 // (mm) Distance from real junction edge + #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge #define JD_HANDLE_SMALL_SEGMENTS // Use curvature estimation instead of just the junction angle // for small segments (< 1mm) with large junction angles (> 135°). #endif @@ -906,7 +908,7 @@ * The probe replaces the Z-MIN endstop and is used for Z homing. * (Automatically enables USE_PROBE_FOR_Z_HOMING.) */ -#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN +//#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN // Force the use of the probe for Z-axis homing //#define USE_PROBE_FOR_Z_HOMING @@ -1191,13 +1193,13 @@ // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR false -#define INVERT_Y_DIR true -#define INVERT_Z_DIR false +#define INVERT_Y_DIR false +#define INVERT_Z_DIR true // @section extruder // For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR false +#define INVERT_E0_DIR true #define INVERT_E1_DIR false #define INVERT_E2_DIR false #define INVERT_E3_DIR false @@ -1241,7 +1243,7 @@ #define Z_MIN_POS 0 #define X_MAX_POS X_BED_SIZE #define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 200 +#define Z_MAX_POS 150 /** * Software Endstops @@ -1672,7 +1674,7 @@ * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) */ -//#define EEPROM_SETTINGS // Persistent storage with M500 and M501 +#define EEPROM_SETTINGS // Persistent storage with M500 and M501 //#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. #define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load @@ -1706,14 +1708,14 @@ // Preheat Constants - Up to 5 are supported without changes // #define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 180 -#define PREHEAT_1_TEMP_BED 70 +#define PREHEAT_1_TEMP_HOTEND 205 +#define PREHEAT_1_TEMP_BED 60 #define PREHEAT_1_TEMP_CHAMBER 35 #define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 #define PREHEAT_2_LABEL "ABS" #define PREHEAT_2_TEMP_HOTEND 240 -#define PREHEAT_2_TEMP_BED 110 +#define PREHEAT_2_TEMP_BED 100 #define PREHEAT_2_TEMP_CHAMBER 35 #define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 @@ -1845,7 +1847,7 @@ * * View the current statistics with M78. */ -//#define PRINTCOUNTER +#define PRINTCOUNTER #if ENABLED(PRINTCOUNTER) #define PRINTCOUNTER_SAVE_INTERVAL 60 // (minutes) EEPROM save interval during print #endif @@ -1936,14 +1938,14 @@ * SD Card support is disabled by default. If your controller has an SD slot, * you must uncomment the following option or it won't work. */ -//#define SDSUPPORT +#define SDSUPPORT /** * SD CARD: ENABLE CRC * * Use CRC checks and retries on the SD communication. */ -//#define SD_CHECK_AND_RETRY +#define SD_CHECK_AND_RETRY /** * LCD Menu Items @@ -1960,13 +1962,13 @@ // This option overrides the default number of encoder pulses needed to // produce one step. Should be increased for high-resolution encoders. // -//#define ENCODER_PULSES_PER_STEP 4 +#define ENCODER_PULSES_PER_STEP 4 // // Use this option to override the number of step signals required to // move between next/prev menu items. // -//#define ENCODER_STEPS_PER_MENU_ITEM 1 +#define ENCODER_STEPS_PER_MENU_ITEM 1 /** * Encoder Direction Options @@ -1983,7 +1985,7 @@ // // Set this option if CLOCKWISE causes values to DECREASE // -//#define REVERSE_ENCODER_DIRECTION +#define REVERSE_ENCODER_DIRECTION // // This option reverses the encoder direction for navigating LCD menus. @@ -2249,7 +2251,7 @@ // // LCD for Melzi Card with Graphical LCD // -//#define LCD_FOR_MELZI +#define LCD_FOR_MELZI // // Original Ulticontroller from Ultimaker 2 printer with SSD1309 I2C display and encoder diff --git a/config/examples/Wanhao/Duplicator i3 2.1/Configuration_adv.h b/config/examples/Wanhao/Duplicator i3 2.1/Configuration_adv.h index 5335fa012a..1e0b07363e 100644 --- a/config/examples/Wanhao/Duplicator i3 2.1/Configuration_adv.h +++ b/config/examples/Wanhao/Duplicator i3 2.1/Configuration_adv.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Wanhao/Duplicator i3 2.1" + /** * Configuration_adv.h * @@ -867,7 +869,7 @@ // On a 300mm bed a 5% grade would give a misalignment of ~1.5cm #define G34_MAX_GRADE 5 // (%) Maximum incline that G34 will handle - #define Z_STEPPER_ALIGN_ITERATIONS 5 // Number of iterations to apply during alignment + #define Z_STEPPER_ALIGN_ITERATIONS 3 // Number of iterations to apply during alignment #define Z_STEPPER_ALIGN_ACC 0.02 // Stop iterating early if the accuracy is better than this #define RESTORE_LEVELING_AFTER_G34 // Restore leveling after G34 is done? // After G34, re-home Z (G28 Z) or just calculate it from the last probe heights? @@ -2091,7 +2093,7 @@ // The ASCII buffer for serial input #define MAX_CMD_SIZE 96 -#define BUFSIZE 4 +#define BUFSIZE 32 // Transmission to Host Buffer Size // To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0. @@ -2100,7 +2102,7 @@ // For debug-echo: 128 bytes for the optimal speed. // Other output doesn't need to be that speedy. // :[0, 2, 4, 8, 16, 32, 64, 128, 256] -#define TX_BUFFER_SIZE 0 +#define TX_BUFFER_SIZE 32 // Host Receive Buffer Size // Without XON/XOFF flow control (see SERIAL_XON_XOFF below) 32 bytes should be enough. diff --git a/config/examples/Wanhao/Duplicator i3 Mini/Configuration.h b/config/examples/Wanhao/Duplicator i3 Mini/Configuration.h index 78c2dc9160..73aaf692f6 100644 --- a/config/examples/Wanhao/Duplicator i3 Mini/Configuration.h +++ b/config/examples/Wanhao/Duplicator i3 Mini/Configuration.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Wanhao/Duplicator i3 Mini" + /** * Configuration.h * @@ -69,7 +71,7 @@ // @section info // Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes. +#define STRING_CONFIG_H_AUTHOR "(thisiskeithb, Wanhao i3 Mini)" // Who made the changes. //#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) /** @@ -87,7 +89,7 @@ #define SHOW_BOOTSCREEN // Show the bitmap in Marlin/_Bootscreen.h on startup. -//#define SHOW_CUSTOM_BOOTSCREEN +#define SHOW_CUSTOM_BOOTSCREEN // Show the bitmap in Marlin/_Statusscreen.h on the status screen. //#define CUSTOM_STATUS_SCREEN_IMAGE @@ -134,11 +136,11 @@ // Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_RAMPS_14_EFB + #define MOTHERBOARD BOARD_WANHAO_ONEPLUS #endif // Name displayed in the LCD "Ready" message and Info menu -//#define CUSTOM_MACHINE_NAME "3D Printer" +#define CUSTOM_MACHINE_NAME "i3 Mini" // Printer's unique ID, used by some programs to differentiate between machines. // Choose your own or use a service like https://www.uuidgenerator.net/version4 @@ -416,7 +418,7 @@ * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. */ -#define TEMP_SENSOR_0 1 +#define TEMP_SENSOR_0 13 #define TEMP_SENSOR_1 0 #define TEMP_SENSOR_2 0 #define TEMP_SENSOR_3 0 @@ -505,11 +507,12 @@ #define PID_K1 0.95 // Smoothing factor within any PID loop #if ENABLED(PIDTEMP) - //#define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) - //#define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) + #define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) + #define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) // Set/get with gcode: M301 E[extruder number, 0-2] + // Wanhao Duplicator i3 Mini & rebrands #if ENABLED(PID_PARAMS_PER_HOTEND) // Specify between 1 and HOTENDS values per array. // If fewer than EXTRUDER values are provided, the last element will be repeated. @@ -683,10 +686,10 @@ // Specify here all the endstop connectors that are connected to any endstop or probe. // Almost all printers will be using one per axis. Probes will use one or more of the // extra connectors. Leave undefined any used for non-endstop and non-probe purposes. -#define USE_XMIN_PLUG +//#define USE_XMIN_PLUG #define USE_YMIN_PLUG #define USE_ZMIN_PLUG -//#define USE_XMAX_PLUG +#define USE_XMAX_PLUG //#define USE_YMAX_PLUG //#define USE_ZMAX_PLUG @@ -717,13 +720,13 @@ #endif // Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define X_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_PROBE_ENDSTOP_INVERTING false // Set to true to invert the logic of the probe. +#define X_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Y_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Z_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define X_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Y_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Z_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Z_MIN_PROBE_ENDSTOP_INVERTING true // Set to true to invert the logic of the probe. /** * Stepper Drivers @@ -806,14 +809,14 @@ * Override with M92 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 500 } +#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 94 } /** * Default Max Feed Rate (mm/s) * Override with M203 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 } +#define DEFAULT_MAX_FEEDRATE { 400, 400, 15, 50 } //#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 #if ENABLED(LIMITED_MAX_FR_EDITING) @@ -826,7 +829,7 @@ * Override with M201 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 } +#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 3000 } //#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 #if ENABLED(LIMITED_MAX_ACCEL_EDITING) @@ -841,9 +844,9 @@ * M204 R Retract Acceleration * M204 T Travel Acceleration */ -#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves +#define DEFAULT_ACCELERATION 800 // X, Y, Z and E acceleration for printing moves +#define DEFAULT_RETRACT_ACCELERATION 800 // E acceleration for retracts +#define DEFAULT_TRAVEL_ACCELERATION 1000 // X, Y, Z acceleration for travel (non printing) moves /** * Default Jerk limits (mm/s) @@ -877,7 +880,7 @@ * https://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html */ #if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.013 // (mm) Distance from real junction edge + #define JUNCTION_DEVIATION_MM 0.05 // (mm) Distance from real junction edge #define JD_HANDLE_SMALL_SEGMENTS // Use curvature estimation instead of just the junction angle // for small segments (< 1mm) with large junction angles (> 135°). #endif @@ -1190,14 +1193,14 @@ // @section machine // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR false -#define INVERT_Y_DIR true +#define INVERT_X_DIR true +#define INVERT_Y_DIR false #define INVERT_Z_DIR false // @section extruder // For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR false +#define INVERT_E0_DIR true #define INVERT_E1_DIR false #define INVERT_E2_DIR false #define INVERT_E3_DIR false @@ -1225,15 +1228,15 @@ // Direction of endstops when homing; 1=MAX, -1=MIN // :[-1,1] -#define X_HOME_DIR -1 +#define X_HOME_DIR 1 #define Y_HOME_DIR -1 #define Z_HOME_DIR -1 // @section machine // The size of the printable area -#define X_BED_SIZE 200 -#define Y_BED_SIZE 200 +#define X_BED_SIZE 125 +#define Y_BED_SIZE 140 // Travel limits (mm) after homing, corresponding to endstop positions. #define X_MIN_POS 0 @@ -1241,7 +1244,7 @@ #define Z_MIN_POS 0 #define X_MAX_POS X_BED_SIZE #define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 200 +#define Z_MAX_POS 100 /** * Software Endstops @@ -1389,7 +1392,7 @@ //#define AUTO_BED_LEVELING_LINEAR //#define AUTO_BED_LEVELING_BILINEAR //#define AUTO_BED_LEVELING_UBL -//#define MESH_BED_LEVELING +#define MESH_BED_LEVELING /** * Normally G28 leaves leveling disabled on completion. Enable one of @@ -1438,7 +1441,7 @@ /** * Enable the G26 Mesh Validation Pattern tool. */ - //#define G26_MESH_VALIDATION + #define G26_MESH_VALIDATION #if ENABLED(G26_MESH_VALIDATION) #define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle. #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for G26. @@ -1518,16 +1521,16 @@ * Add a bed leveling sub-menu for ABL or MBL. * Include a guided procedure if manual probing is enabled. */ -//#define LCD_BED_LEVELING +#define LCD_BED_LEVELING #if ENABLED(LCD_BED_LEVELING) #define MESH_EDIT_Z_STEP 0.025 // (mm) Step size while manually probing Z axis. #define LCD_PROBE_Z_RANGE 4 // (mm) Z Range centered on Z_MIN_POS for LCD Z adjustment - //#define MESH_EDIT_MENU // Add a menu to edit mesh points + #define MESH_EDIT_MENU // Add a menu to edit mesh points #endif // Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS +#define LEVEL_BED_CORNERS #if ENABLED(LEVEL_BED_CORNERS) #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets @@ -1672,12 +1675,12 @@ * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) */ -//#define EEPROM_SETTINGS // Persistent storage with M500 and M501 +#define EEPROM_SETTINGS // Persistent storage with M500 and M501 //#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. #define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load #if ENABLED(EEPROM_SETTINGS) - //#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. + #define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. #endif // @@ -1711,9 +1714,9 @@ #define PREHEAT_1_TEMP_CHAMBER 35 #define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 -#define PREHEAT_2_LABEL "ABS" +#define PREHEAT_2_LABEL "PETG" #define PREHEAT_2_TEMP_HOTEND 240 -#define PREHEAT_2_TEMP_BED 110 +#define PREHEAT_2_TEMP_BED 80 #define PREHEAT_2_TEMP_CHAMBER 35 #define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 @@ -1845,7 +1848,7 @@ * * View the current statistics with M78. */ -//#define PRINTCOUNTER +#define PRINTCOUNTER #if ENABLED(PRINTCOUNTER) #define PRINTCOUNTER_SAVE_INTERVAL 60 // (minutes) EEPROM save interval during print #endif @@ -1921,7 +1924,7 @@ * * :['JAPANESE', 'WESTERN', 'CYRILLIC'] */ -#define DISPLAY_CHARSET_HD44780 JAPANESE +#define DISPLAY_CHARSET_HD44780 WESTERN /** * Info Screen Style (0:Classic, 1:Průša) @@ -1936,7 +1939,7 @@ * SD Card support is disabled by default. If your controller has an SD slot, * you must uncomment the following option or it won't work. */ -//#define SDSUPPORT +#define SDSUPPORT /** * SD CARD: ENABLE CRC @@ -1960,13 +1963,13 @@ // This option overrides the default number of encoder pulses needed to // produce one step. Should be increased for high-resolution encoders. // -//#define ENCODER_PULSES_PER_STEP 4 +#define ENCODER_PULSES_PER_STEP 4 // // Use this option to override the number of step signals required to // move between next/prev menu items. // -//#define ENCODER_STEPS_PER_MENU_ITEM 1 +#define ENCODER_STEPS_PER_MENU_ITEM 1 /** * Encoder Direction Options @@ -2014,7 +2017,7 @@ // If you have a speaker that can produce tones, enable it here. // By default Marlin assumes you have a buzzer with a fixed frequency. // -//#define SPEAKER +#define SPEAKER // // The duration and frequency for the UI feedback sound. @@ -2220,7 +2223,7 @@ // MakerLab Mini Panel with graphic // controller and SD support - https://reprap.org/wiki/Mini_panel // -//#define MINIPANEL +#define MINIPANEL // // MaKr3d Makr-Panel with graphic controller and SD support. @@ -2618,7 +2621,7 @@ // Use software PWM to drive the fan, as for the heaters. This uses a very low frequency // which is not as annoying as with the hardware PWM. On the other hand, if this frequency // is too low, you should also increment SOFT_PWM_SCALE. -//#define FAN_SOFT_PWM +#define FAN_SOFT_PWM // Incrementing this by 1 will double the software PWM frequency, // affecting heaters, and the fan if FAN_SOFT_PWM is enabled. diff --git a/config/examples/Wanhao/Duplicator i3 Mini/Configuration_adv.h b/config/examples/Wanhao/Duplicator i3 Mini/Configuration_adv.h index 5335fa012a..730dca15b1 100644 --- a/config/examples/Wanhao/Duplicator i3 Mini/Configuration_adv.h +++ b/config/examples/Wanhao/Duplicator i3 Mini/Configuration_adv.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Wanhao/Duplicator i3 Mini" + /** * Configuration_adv.h * @@ -741,7 +743,7 @@ //#define HOMING_BACKOFF_POST_MM { 2, 2, 2 } // (mm) Backoff from endstops after homing -//#define QUICK_HOME // If G28 contains XY do a diagonal move first +#define QUICK_HOME // If G28 contains XY do a diagonal move first //#define HOME_Y_BEFORE_X // If G28 contains XY home Y before X //#define HOME_Z_FIRST // Home Z first. Requires a Z-MIN endstop (not a probe). //#define CODEPENDENT_XY_HOMING // If X/Y can't home without homing Y/X first @@ -867,7 +869,7 @@ // On a 300mm bed a 5% grade would give a misalignment of ~1.5cm #define G34_MAX_GRADE 5 // (%) Maximum incline that G34 will handle - #define Z_STEPPER_ALIGN_ITERATIONS 5 // Number of iterations to apply during alignment + #define Z_STEPPER_ALIGN_ITERATIONS 3 // Number of iterations to apply during alignment #define Z_STEPPER_ALIGN_ACC 0.02 // Stop iterating early if the accuracy is better than this #define RESTORE_LEVELING_AFTER_G34 // Restore leveling after G34 is done? // After G34, re-home Z (G28 Z) or just calculate it from the last probe heights? @@ -1175,7 +1177,7 @@ #endif // Include a page of printer information in the LCD Main Menu - //#define LCD_INFO_MENU + #define LCD_INFO_MENU #if ENABLED(LCD_INFO_MENU) //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages #endif @@ -1229,13 +1231,13 @@ #endif // Scroll a longer status message into view - //#define STATUS_MESSAGE_SCROLLING + #define STATUS_MESSAGE_SCROLLING // On the Info Screen, display XY with one decimal place when possible //#define LCD_DECIMAL_SMALL_XY // Add an 'M73' G-code to set the current percentage - //#define LCD_SET_PROGRESS_MANUALLY + #define LCD_SET_PROGRESS_MANUALLY // Show the E position (filament used) during printing //#define LCD_SHOW_E_TOTAL @@ -1384,7 +1386,7 @@ //#define LONG_FILENAME_HOST_SUPPORT // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES + #define SCROLL_LONG_FILENAMES // Leave the heaters on after Stop Print (not recommended!) //#define SD_ABORT_NO_COOLDOWN @@ -1523,7 +1525,7 @@ // A bigger font is available for edit items. Costs 3120 bytes of PROGMEM. // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. - //#define USE_BIG_EDIT_FONT + #define USE_BIG_EDIT_FONT // A smaller font may be used on the Info Screen. Costs 2434 bytes of PROGMEM. // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. @@ -1790,20 +1792,20 @@ * * Warning: Does not respect endstops! */ -//#define BABYSTEPPING +#define BABYSTEPPING #if ENABLED(BABYSTEPPING) //#define INTEGRATED_BABYSTEPPING // EXPERIMENTAL integration of babystepping into the Stepper ISR //#define BABYSTEP_WITHOUT_HOMING - //#define BABYSTEP_ALWAYS_AVAILABLE // Allow babystepping at all times (not just during movement). + #define BABYSTEP_ALWAYS_AVAILABLE // Allow babystepping at all times (not just during movement). //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way //#define BABYSTEP_MILLIMETER_UNITS // Specify BABYSTEP_MULTIPLICATOR_(XY|Z) in mm instead of micro-steps #define BABYSTEP_MULTIPLICATOR_Z 1 // (steps or mm) Steps or millimeter distance for each Z babystep #define BABYSTEP_MULTIPLICATOR_XY 1 // (steps or mm) Steps or millimeter distance for each XY babystep - //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. + #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 2500 // Maximum interval between clicks, in milliseconds. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on doubleclick when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) diff --git a/config/examples/Weistek/wt150/Configuration.h b/config/examples/Weistek/wt150/Configuration.h index 78c2dc9160..4d98da072a 100644 --- a/config/examples/Weistek/wt150/Configuration.h +++ b/config/examples/Weistek/wt150/Configuration.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Weistek/wt150" + /** * Configuration.h * @@ -69,7 +71,7 @@ // @section info // Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes. +#define STRING_CONFIG_H_AUTHOR "(none, wt150)" // Who made the changes. //#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) /** @@ -127,22 +129,22 @@ * * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ -#define BAUDRATE 250000 +#define BAUDRATE 115200 // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH // Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_RAMPS_14_EFB + #define MOTHERBOARD BOARD_MIGHTYBOARD_REVE #endif // Name displayed in the LCD "Ready" message and Info menu -//#define CUSTOM_MACHINE_NAME "3D Printer" +//#define CUSTOM_MACHINE_NAME "Weistek WT150" // Printer's unique ID, used by some programs to differentiate between machines. // Choose your own or use a service like https://www.uuidgenerator.net/version4 -//#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" +//#define MACHINE_UUID "5f0bb7a3-0e14-428c-812b-15ab0d3ecc71" // @section extruder @@ -416,7 +418,7 @@ * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. */ -#define TEMP_SENSOR_0 1 +#define TEMP_SENSOR_0 -2 #define TEMP_SENSOR_1 0 #define TEMP_SENSOR_2 0 #define TEMP_SENSOR_3 0 @@ -510,16 +512,17 @@ //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) // Set/get with gcode: M301 E[extruder number, 0-2] + // WT150, based on: M303 E0 S220 C8 #if ENABLED(PID_PARAMS_PER_HOTEND) // Specify between 1 and HOTENDS values per array. // If fewer than EXTRUDER values are provided, the last element will be repeated. - #define DEFAULT_Kp_LIST { 22.20, 22.20 } - #define DEFAULT_Ki_LIST { 1.08, 1.08 } - #define DEFAULT_Kd_LIST { 114.00, 114.00 } + #define DEFAULT_Kp_LIST { 22.10, 22.10 } + #define DEFAULT_Ki_LIST { 1.10, 1.10 } + #define DEFAULT_Kd_LIST { 110.78, 110.78 } #else - #define DEFAULT_Kp 22.20 - #define DEFAULT_Ki 1.08 - #define DEFAULT_Kd 114.00 + #define DEFAULT_Kp 22.10 + #define DEFAULT_Ki 1.10 + #define DEFAULT_Kd 110.78 #endif #endif // PIDTEMP @@ -685,13 +688,13 @@ // extra connectors. Leave undefined any used for non-endstop and non-probe purposes. #define USE_XMIN_PLUG #define USE_YMIN_PLUG -#define USE_ZMIN_PLUG +//#define USE_ZMIN_PLUG //#define USE_XMAX_PLUG //#define USE_YMAX_PLUG -//#define USE_ZMAX_PLUG +#define USE_ZMAX_PLUG // Enable pullup for all endstops to prevent a floating state -#define ENDSTOPPULLUPS +//#define ENDSTOPPULLUPS #if DISABLED(ENDSTOPPULLUPS) // Disable ENDSTOPPULLUPS to set pullups individually //#define ENDSTOPPULLUP_XMAX @@ -717,12 +720,12 @@ #endif // Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. +#define X_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Y_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. #define Z_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. #define X_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. #define Y_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. +#define Z_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. #define Z_MIN_PROBE_ENDSTOP_INVERTING false // Set to true to invert the logic of the probe. /** @@ -806,14 +809,14 @@ * Override with M92 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 500 } +#define DEFAULT_AXIS_STEPS_PER_UNIT { 71.699959, 71.699959, 71.699959, 100.470955 } /** * Default Max Feed Rate (mm/s) * Override with M203 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 } +#define DEFAULT_MAX_FEEDRATE { 83.333333, 83.333333, 19.5, 26.666666 } //#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 #if ENABLED(LIMITED_MAX_FR_EDITING) @@ -826,7 +829,7 @@ * Override with M201 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 } +#define DEFAULT_MAX_ACCELERATION { 1200, 1200, 100, 10000 } //#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 #if ENABLED(LIMITED_MAX_ACCEL_EDITING) @@ -841,9 +844,9 @@ * M204 R Retract Acceleration * M204 T Travel Acceleration */ -#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves +#define DEFAULT_ACCELERATION 1200 // X, Y, Z and E acceleration for printing moves +#define DEFAULT_RETRACT_ACCELERATION 1200 // E acceleration for retracts +#define DEFAULT_TRAVEL_ACCELERATION 1200 // X, Y, Z acceleration for travel (non printing) moves /** * Default Jerk limits (mm/s) @@ -855,8 +858,8 @@ */ //#define CLASSIC_JERK #if ENABLED(CLASSIC_JERK) - #define DEFAULT_XJERK 10.0 - #define DEFAULT_YJERK 10.0 + #define DEFAULT_XJERK 8.0 + #define DEFAULT_YJERK 8.0 #define DEFAULT_ZJERK 0.3 //#define TRAVEL_EXTRA_XYJERK 0.0 // Additional jerk allowance for all travel moves @@ -877,7 +880,7 @@ * https://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html */ #if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.013 // (mm) Distance from real junction edge + #define JUNCTION_DEVIATION_MM 0.021 // (mm) Distance from real junction edge #define JD_HANDLE_SMALL_SEGMENTS // Use curvature estimation instead of just the junction angle // for small segments (< 1mm) with large junction angles (> 135°). #endif @@ -1190,8 +1193,8 @@ // @section machine // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR false -#define INVERT_Y_DIR true +#define INVERT_X_DIR true +#define INVERT_Y_DIR false #define INVERT_Z_DIR false // @section extruder @@ -1227,13 +1230,13 @@ // :[-1,1] #define X_HOME_DIR -1 #define Y_HOME_DIR -1 -#define Z_HOME_DIR -1 +#define Z_HOME_DIR 1 // @section machine // The size of the printable area -#define X_BED_SIZE 200 -#define Y_BED_SIZE 200 +#define X_BED_SIZE 150 +#define Y_BED_SIZE 150 // Travel limits (mm) after homing, corresponding to endstop positions. #define X_MIN_POS 0 @@ -1241,7 +1244,7 @@ #define Z_MIN_POS 0 #define X_MAX_POS X_BED_SIZE #define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 200 +#define Z_MAX_POS 143.0 /** * Software Endstops @@ -1672,7 +1675,7 @@ * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) */ -//#define EEPROM_SETTINGS // Persistent storage with M500 and M501 +#define EEPROM_SETTINGS // Persistent storage with M500 and M501 //#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. #define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load @@ -1845,7 +1848,7 @@ * * View the current statistics with M78. */ -//#define PRINTCOUNTER +#define PRINTCOUNTER #if ENABLED(PRINTCOUNTER) #define PRINTCOUNTER_SAVE_INTERVAL 60 // (minutes) EEPROM save interval during print #endif @@ -1936,7 +1939,7 @@ * SD Card support is disabled by default. If your controller has an SD slot, * you must uncomment the following option or it won't work. */ -//#define SDSUPPORT +#define SDSUPPORT /** * SD CARD: ENABLE CRC @@ -2190,12 +2193,14 @@ // // NOTE: If the LCD is unresponsive you may need to reverse the plugs. // +// NOTE: If the LCD is unresponsive you may need to reverse the plugs. +// // // RepRapDiscount FULL GRAPHIC Smart Controller // https://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller // -//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER +#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER // // K.3D Full Graphic Smart Controller diff --git a/config/examples/Weistek/wt150/Configuration_adv.h b/config/examples/Weistek/wt150/Configuration_adv.h index 5335fa012a..0da582f138 100644 --- a/config/examples/Weistek/wt150/Configuration_adv.h +++ b/config/examples/Weistek/wt150/Configuration_adv.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Weistek/wt150" + /** * Configuration_adv.h * @@ -540,7 +542,7 @@ * Multiple extruders can be assigned to the same pin in which case * the fan will turn on when any selected extruder is above the threshold. */ -#define E0_AUTO_FAN_PIN -1 +//#define E0_AUTO_FAN_PIN -1 #define E1_AUTO_FAN_PIN -1 #define E2_AUTO_FAN_PIN -1 #define E3_AUTO_FAN_PIN -1 @@ -867,7 +869,7 @@ // On a 300mm bed a 5% grade would give a misalignment of ~1.5cm #define G34_MAX_GRADE 5 // (%) Maximum incline that G34 will handle - #define Z_STEPPER_ALIGN_ITERATIONS 5 // Number of iterations to apply during alignment + #define Z_STEPPER_ALIGN_ITERATIONS 3 // Number of iterations to apply during alignment #define Z_STEPPER_ALIGN_ACC 0.02 // Stop iterating early if the accuracy is better than this #define RESTORE_LEVELING_AFTER_G34 // Restore leveling after G34 is done? // After G34, re-home Z (G28 Z) or just calculate it from the last probe heights? @@ -1102,14 +1104,14 @@ /** * I2C-based DIGIPOTs (e.g., Azteeg X3 Pro) */ -//#define DIGIPOT_MCP4018 // Requires https://github.com/felias-fogg/SlowSoftI2CMaster +#define DIGIPOT_MCP4018 // Requires https://github.com/felias-fogg/SlowSoftI2CMaster //#define DIGIPOT_MCP4451 #if EITHER(DIGIPOT_MCP4018, DIGIPOT_MCP4451) - #define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT:4 AZTEEG_X3_PRO:8 MKS_SBASE:5 MIGHTYBOARD_REVE:5 + #define DIGIPOT_I2C_NUM_CHANNELS 5 // 5DPRINT:4 AZTEEG_X3_PRO:8 MKS_SBASE:5 MIGHTYBOARD_REVE:5 // Actual motor currents in Amps. The number of entries must match DIGIPOT_I2C_NUM_CHANNELS. // These correspond to the physical drivers, so be mindful if the order is changed. - #define DIGIPOT_I2C_MOTOR_CURRENTS { 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0 } // AZTEEG_X3_PRO + #define DIGIPOT_I2C_MOTOR_CURRENTS { 0.22, 0.22, 0.39, 0.42, 0.42 } // MIGHTYBOARD_REVE //#define DIGIPOT_USE_RAW_VALUES // Use DIGIPOT_MOTOR_CURRENT raw wiper values (instead of A4988 motor currents) @@ -1175,7 +1177,7 @@ #endif // Include a page of printer information in the LCD Main Menu - //#define LCD_INFO_MENU + #define LCD_INFO_MENU #if ENABLED(LCD_INFO_MENU) //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages #endif diff --git a/config/examples/Zonestar/P802M/Configuration.h b/config/examples/Zonestar/P802M/Configuration.h index 78c2dc9160..b14c126e43 100644 --- a/config/examples/Zonestar/P802M/Configuration.h +++ b/config/examples/Zonestar/P802M/Configuration.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Zonestar/P802M" + /** * Configuration.h * @@ -69,7 +71,7 @@ // @section info // Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes. +#define STRING_CONFIG_H_AUTHOR "(Nerseth, Zonestar P802M)" // Who made the changes. //#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) /** @@ -134,11 +136,11 @@ // Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_RAMPS_14_EFB + #define MOTHERBOARD BOARD_MELZI // 63 #endif // Name displayed in the LCD "Ready" message and Info menu -//#define CUSTOM_MACHINE_NAME "3D Printer" +#define CUSTOM_MACHINE_NAME "Zonestar P802M" // Printer's unique ID, used by some programs to differentiate between machines. // Choose your own or use a service like https://www.uuidgenerator.net/version4 @@ -416,7 +418,7 @@ * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. */ -#define TEMP_SENSOR_0 1 +#define TEMP_SENSOR_0 501 #define TEMP_SENSOR_1 0 #define TEMP_SENSOR_2 0 #define TEMP_SENSOR_3 0 @@ -424,7 +426,7 @@ #define TEMP_SENSOR_5 0 #define TEMP_SENSOR_6 0 #define TEMP_SENSOR_7 0 -#define TEMP_SENSOR_BED 0 +#define TEMP_SENSOR_BED 502 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 #define TEMP_SENSOR_COOLER 0 @@ -480,7 +482,7 @@ #define HEATER_5_MAXTEMP 275 #define HEATER_6_MAXTEMP 275 #define HEATER_7_MAXTEMP 275 -#define BED_MAXTEMP 150 +#define BED_MAXTEMP 120 #define CHAMBER_MAXTEMP 60 /** @@ -542,7 +544,7 @@ */ //#define PIDTEMPBED -//#define BED_LIMIT_SWITCHING +#define BED_LIMIT_SWITCHING /** * Max Bed Power @@ -634,7 +636,7 @@ * Note: For Bowden Extruders make this large enough to allow load/unload. */ #define PREVENT_LENGTHY_EXTRUDE -#define EXTRUDE_MAXLENGTH 200 +#define EXTRUDE_MAXLENGTH 210 //=========================================================================== //======================== Thermal Runaway Protection ======================= @@ -717,13 +719,13 @@ #endif // Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. +#define X_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Y_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Z_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. #define X_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. #define Y_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. #define Z_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_PROBE_ENDSTOP_INVERTING false // Set to true to invert the logic of the probe. +#define Z_MIN_PROBE_ENDSTOP_INVERTING true // Set to true to invert the logic of the probe. /** * Stepper Drivers @@ -806,14 +808,14 @@ * Override with M92 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 500 } +#define DEFAULT_AXIS_STEPS_PER_UNIT { 100, 100, 400, 90 } /** * Default Max Feed Rate (mm/s) * Override with M203 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 } +#define DEFAULT_MAX_FEEDRATE { 400, 400, 8, 50 } //#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 #if ENABLED(LIMITED_MAX_FR_EDITING) @@ -826,7 +828,7 @@ * Override with M201 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 } +#define DEFAULT_MAX_ACCELERATION { 2000, 2000, 100, 10000 } //#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 #if ENABLED(LIMITED_MAX_ACCEL_EDITING) @@ -841,9 +843,9 @@ * M204 R Retract Acceleration * M204 T Travel Acceleration */ -#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves +#define DEFAULT_ACCELERATION 400 // X, Y, Z and E acceleration for printing moves +#define DEFAULT_RETRACT_ACCELERATION 1000 // E acceleration for retracts +#define DEFAULT_TRAVEL_ACCELERATION 1000 // X, Y, Z acceleration for travel (non printing) moves /** * Default Jerk limits (mm/s) @@ -877,7 +879,7 @@ * https://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html */ #if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.013 // (mm) Distance from real junction edge + #define JUNCTION_DEVIATION_MM 0.09 // (mm) Distance from real junction edge #define JD_HANDLE_SMALL_SEGMENTS // Use curvature estimation instead of just the junction angle // for small segments (< 1mm) with large junction angles (> 135°). #endif @@ -946,7 +948,7 @@ * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. * (e.g., an inductive probe or a nozzle-based probe-switch.) */ -//#define FIX_MOUNTED_PROBE +#define FIX_MOUNTED_PROBE /** * Use the nozzle as the probe, as with a conductive @@ -1055,14 +1057,15 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +//#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +#define NOZZLE_TO_PROBE_OFFSET { -27.3, -48.7, -3.2 } // Most probes should stay away from the edges of the bed, but // with NOZZLE_AS_PROBE this can be negative for a wider probing area. -#define PROBING_MARGIN 10 +#define PROBING_MARGIN 50 // X and Y axis travel speed (mm/min) between probes -#define XY_PROBE_FEEDRATE (133*60) +#define XY_PROBE_FEEDRATE (100*60) // Feedrate (mm/min) for the first approach when double-probing (MULTIPLE_PROBING == 2) #define Z_PROBE_FEEDRATE_FAST (4*60) @@ -1106,7 +1109,7 @@ * A total of 2 does fast/slow probes with a weighted average. * A total of 3 or more adds more slow probes, taking the average. */ -//#define MULTIPLE_PROBING 2 +#define MULTIPLE_PROBING 2 //#define EXTRA_PROBING 1 /** @@ -1123,10 +1126,10 @@ * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. */ -#define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow +#define Z_CLEARANCE_DEPLOY_PROBE 5 // Z Clearance for Deploy/Stow #define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points #define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes -//#define Z_AFTER_PROBING 5 // Z position after probing is done +#define Z_AFTER_PROBING 5 // Z position after probing is done #define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping @@ -1191,8 +1194,8 @@ // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR false -#define INVERT_Y_DIR true -#define INVERT_Z_DIR false +#define INVERT_Y_DIR false +#define INVERT_Z_DIR true // @section extruder @@ -1236,12 +1239,12 @@ #define Y_BED_SIZE 200 // Travel limits (mm) after homing, corresponding to endstop positions. -#define X_MIN_POS 0 -#define Y_MIN_POS 0 +#define X_MIN_POS -50 +#define Y_MIN_POS -10 #define Z_MIN_POS 0 #define X_MAX_POS X_BED_SIZE #define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 200 +#define Z_MAX_POS 220 /** * Software Endstops @@ -1387,7 +1390,7 @@ */ //#define AUTO_BED_LEVELING_3POINT //#define AUTO_BED_LEVELING_LINEAR -//#define AUTO_BED_LEVELING_BILINEAR +#define AUTO_BED_LEVELING_BILINEAR //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING @@ -1587,7 +1590,7 @@ // - Move the Z probe (or nozzle) to a defined XY point before Z Homing. // - Prevent Z homing when the Z probe is outside bed area. // -//#define Z_SAFE_HOMING +#define Z_SAFE_HOMING #if ENABLED(Z_SAFE_HOMING) #define Z_SAFE_HOMING_X_POINT X_CENTER // X point for Z homing @@ -1595,7 +1598,7 @@ #endif // Homing speeds (mm/min) -#define HOMING_FEEDRATE_MM_M { (50*60), (50*60), (4*60) } +#define HOMING_FEEDRATE_MM_M { (100*60), (100*60), (4*60) } // Validate that endstops are triggered on homing moves #define VALIDATE_HOMING_ENDSTOPS @@ -1672,9 +1675,9 @@ * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) */ -//#define EEPROM_SETTINGS // Persistent storage with M500 and M501 +#define EEPROM_SETTINGS // Persistent storage with M500 and M501 //#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! -#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. +//#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. #define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load #if ENABLED(EEPROM_SETTINGS) //#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. @@ -1706,14 +1709,14 @@ // Preheat Constants - Up to 5 are supported without changes // #define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 180 -#define PREHEAT_1_TEMP_BED 70 +#define PREHEAT_1_TEMP_HOTEND 200 +#define PREHEAT_1_TEMP_BED 60 #define PREHEAT_1_TEMP_CHAMBER 35 #define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 #define PREHEAT_2_LABEL "ABS" -#define PREHEAT_2_TEMP_HOTEND 240 -#define PREHEAT_2_TEMP_BED 110 +#define PREHEAT_2_TEMP_HOTEND 230 +#define PREHEAT_2_TEMP_BED 100 #define PREHEAT_2_TEMP_CHAMBER 35 #define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 @@ -1728,7 +1731,7 @@ * P1 Raise the nozzle always to Z-park height. * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. */ -//#define NOZZLE_PARK_FEATURE +#define NOZZLE_PARK_FEATURE #if ENABLED(NOZZLE_PARK_FEATURE) // Specify a park position as { X, Y, Z_raise } @@ -1936,7 +1939,7 @@ * SD Card support is disabled by default. If your controller has an SD slot, * you must uncomment the following option or it won't work. */ -//#define SDSUPPORT +#define SDSUPPORT /** * SD CARD: ENABLE CRC @@ -2092,7 +2095,7 @@ // // ANET and Tronxy 20x4 Controller // -//#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin. +#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin. // This LCD is known to be susceptible to electrical interference // which scrambles the display. Pressing any button clears it up. // This is a LCD2004 display with 5 analog buttons. diff --git a/config/examples/Zonestar/P802M/Configuration_adv.h b/config/examples/Zonestar/P802M/Configuration_adv.h index 5335fa012a..d2f8fb504e 100644 --- a/config/examples/Zonestar/P802M/Configuration_adv.h +++ b/config/examples/Zonestar/P802M/Configuration_adv.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Zonestar/P802M" + /** * Configuration_adv.h * @@ -266,13 +268,13 @@ * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 60 // Seconds + #define THERMAL_PROTECTION_BED_HYSTERESIS 5 // Degrees Celsius /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds + #define WATCH_BED_TEMP_PERIOD 180 // Seconds #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius #endif @@ -391,7 +393,7 @@ // Show Temperature ADC value // Enable for M105 to include ADC values read from temperature sensors. -//#define SHOW_TEMP_ADC_VALUES +#define SHOW_TEMP_ADC_VALUES /** * High Temperature Thermistor Support @@ -867,7 +869,7 @@ // On a 300mm bed a 5% grade would give a misalignment of ~1.5cm #define G34_MAX_GRADE 5 // (%) Maximum incline that G34 will handle - #define Z_STEPPER_ALIGN_ITERATIONS 5 // Number of iterations to apply during alignment + #define Z_STEPPER_ALIGN_ITERATIONS 3 // Number of iterations to apply during alignment #define Z_STEPPER_ALIGN_ACC 0.02 // Stop iterating early if the accuracy is better than this #define RESTORE_LEVELING_AFTER_G34 // Restore leveling after G34 is done? // After G34, re-home Z (G28 Z) or just calculate it from the last probe heights? @@ -1982,7 +1984,7 @@ // // G2/G3 Arc Support // -#define ARC_SUPPORT // Disable this feature to save ~3226 bytes +//#define ARC_SUPPORT // Disable this feature to save ~3226 bytes #if ENABLED(ARC_SUPPORT) #define MM_PER_ARC_SEGMENT 1 // (mm) Length (or minimum length) of each arc segment //#define ARC_SEGMENTS_PER_R 1 // Max segment length, MM_PER = Min @@ -2311,7 +2313,7 @@ * * Enable PARK_HEAD_ON_PAUSE to add the G-code M125 Pause and Park. */ -//#define ADVANCED_PAUSE_FEATURE +#define ADVANCED_PAUSE_FEATURE #if ENABLED(ADVANCED_PAUSE_FEATURE) #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. diff --git a/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (A4988)/Configuration.h b/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (A4988)/Configuration.h index 78c2dc9160..86bc27b044 100755 --- a/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (A4988)/Configuration.h +++ b/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (A4988)/Configuration.h @@ -21,6 +21,10 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (A4988)" + +// See https://www.thingiverse.com/thing:4562533 + /** * Configuration.h * @@ -69,7 +73,7 @@ // @section info // Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes. +#define STRING_CONFIG_H_AUTHOR "(gjpc 5-5-2020, SKR V1.4 Turbo)" // Who made the changes. //#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) /** @@ -109,7 +113,7 @@ * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] */ -//#define SERIAL_PORT_2 -1 +#define SERIAL_PORT_2 -1 // enables the TFT24 touchscreen mode /** * Select a third serial port on the board to use for communication with the host. @@ -127,18 +131,18 @@ * * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ -#define BAUDRATE 250000 +#define BAUDRATE 115200 // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH // Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_RAMPS_14_EFB + #define MOTHERBOARD BOARD_BTT_SKR_V1_4_TURBO #endif // Name displayed in the LCD "Ready" message and Info menu -//#define CUSTOM_MACHINE_NAME "3D Printer" +#define CUSTOM_MACHINE_NAME "P802QR2 BTT SKR 1.4 Turbo by gjpc" // Printer's unique ID, used by some programs to differentiate between machines. // Choose your own or use a service like https://www.uuidgenerator.net/version4 @@ -148,7 +152,7 @@ // This defines the number of extruders // :[0, 1, 2, 3, 4, 5, 6, 7, 8] -#define EXTRUDERS 1 +#define EXTRUDERS 2 // Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc. #define DEFAULT_NOMINAL_FILAMENT_DIA 1.75 @@ -306,9 +310,9 @@ // Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing). // The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder). // For the other hotends it is their distance from the extruder 0 hotend. -//#define HOTEND_OFFSET_X { 0.0, 20.00 } // (mm) relative X-offset for each nozzle -//#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle -//#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle +#define HOTEND_OFFSET_X { 0.0, 18.00 } // (mm) relative X-offset for each nozzle +#define HOTEND_OFFSET_Y { 0.0, 0.00 } // (mm) relative Y-offset for each nozzle +#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle // @section machine @@ -416,15 +420,15 @@ * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. */ -#define TEMP_SENSOR_0 1 -#define TEMP_SENSOR_1 0 +#define TEMP_SENSOR_0 5 +#define TEMP_SENSOR_1 5 #define TEMP_SENSOR_2 0 #define TEMP_SENSOR_3 0 #define TEMP_SENSOR_4 0 #define TEMP_SENSOR_5 0 #define TEMP_SENSOR_6 0 #define TEMP_SENSOR_7 0 -#define TEMP_SENSOR_BED 0 +#define TEMP_SENSOR_BED 11 // close match to Zonestar 57 may have to add their file #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 #define TEMP_SENSOR_COOLER 0 @@ -480,7 +484,7 @@ #define HEATER_5_MAXTEMP 275 #define HEATER_6_MAXTEMP 275 #define HEATER_7_MAXTEMP 275 -#define BED_MAXTEMP 150 +#define BED_MAXTEMP 130 // from zonestar #define CHAMBER_MAXTEMP 60 /** @@ -627,14 +631,14 @@ * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** */ #define PREVENT_COLD_EXTRUSION -#define EXTRUDE_MINTEMP 170 +#define EXTRUDE_MINTEMP 150 // from zonestar /** * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. * Note: For Bowden Extruders make this large enough to allow load/unload. */ #define PREVENT_LENGTHY_EXTRUDE -#define EXTRUDE_MAXLENGTH 200 +#define EXTRUDE_MAXLENGTH 1000 // 802 longish bowden tubes //=========================================================================== //======================== Thermal Runaway Protection ======================= @@ -717,13 +721,13 @@ #endif // Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define X_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_PROBE_ENDSTOP_INVERTING false // Set to true to invert the logic of the probe. +#define X_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Y_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Z_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define X_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Y_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Z_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Z_MIN_PROBE_ENDSTOP_INVERTING true // Set to true to invert the logic of the probe. /** * Stepper Drivers @@ -752,7 +756,7 @@ //#define Z3_DRIVER_TYPE A4988 //#define Z4_DRIVER_TYPE A4988 #define E0_DRIVER_TYPE A4988 -//#define E1_DRIVER_TYPE A4988 +#define E1_DRIVER_TYPE A4988 //#define E2_DRIVER_TYPE A4988 //#define E3_DRIVER_TYPE A4988 //#define E4_DRIVER_TYPE A4988 @@ -806,14 +810,14 @@ * Override with M92 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 500 } +#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 85 } // taken from zonestar config.h /** * Default Max Feed Rate (mm/s) * Override with M203 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 } +#define DEFAULT_MAX_FEEDRATE { 150, 100, 8, 50 } // slowed down per zonestar //#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 #if ENABLED(LIMITED_MAX_FR_EDITING) @@ -826,7 +830,7 @@ * Override with M201 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 } +#define DEFAULT_MAX_ACCELERATION { 2000, 800, 100, 5000 } // zonestar slowdown //#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 #if ENABLED(LIMITED_MAX_ACCEL_EDITING) @@ -841,7 +845,7 @@ * M204 R Retract Acceleration * M204 T Travel Acceleration */ -#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves +#define DEFAULT_ACCELERATION 1000 // X, Y, Z and E acceleration for printing moves #define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts #define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves @@ -853,7 +857,7 @@ * When changing speed and direction, if the difference is less than the * value set here, it may happen instantaneously. */ -//#define CLASSIC_JERK +#define CLASSIC_JERK #if ENABLED(CLASSIC_JERK) #define DEFAULT_XJERK 10.0 #define DEFAULT_YJERK 10.0 @@ -906,7 +910,7 @@ * The probe replaces the Z-MIN endstop and is used for Z homing. * (Automatically enables USE_PROBE_FOR_Z_HOMING.) */ -#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN +//#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN // Force the use of the probe for Z-axis homing //#define USE_PROBE_FOR_Z_HOMING @@ -926,7 +930,9 @@ * - normally-closed switches to GND and D32. * - normally-open switches to 5V and D32. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +// The supplied blue proximity sensor has the same wire plug as an endstop +// We are using the POWER_LOSS pin P1 0 for the leveling probe +#define Z_MIN_PROBE_PIN P1_00 /** * Probe Type @@ -946,7 +952,7 @@ * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. * (e.g., an inductive probe or a nozzle-based probe-switch.) */ -//#define FIX_MOUNTED_PROBE +#define FIX_MOUNTED_PROBE /** * Use the nozzle as the probe, as with a conductive @@ -1055,14 +1061,14 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +#define NOZZLE_TO_PROBE_OFFSET { 30, 0, 0 } // Most probes should stay away from the edges of the bed, but // with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed (mm/min) between probes -#define XY_PROBE_FEEDRATE (133*60) +#define XY_PROBE_FEEDRATE (100*60) // Feedrate (mm/min) for the first approach when double-probing (MULTIPLE_PROBING == 2) #define Z_PROBE_FEEDRATE_FAST (4*60) @@ -1191,8 +1197,8 @@ // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR false -#define INVERT_Y_DIR true -#define INVERT_Z_DIR false +#define INVERT_Y_DIR false +#define INVERT_Z_DIR true // @section extruder @@ -1232,16 +1238,16 @@ // @section machine // The size of the printable area -#define X_BED_SIZE 200 -#define Y_BED_SIZE 200 +#define X_BED_SIZE 220 +#define Y_BED_SIZE 220 // Travel limits (mm) after homing, corresponding to endstop positions. -#define X_MIN_POS 0 -#define Y_MIN_POS 0 +#define X_MIN_POS -10 +#define Y_MIN_POS -5 #define Z_MIN_POS 0 #define X_MAX_POS X_BED_SIZE #define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 200 +#define Z_MAX_POS 240 /** * Software Endstops @@ -1388,7 +1394,7 @@ //#define AUTO_BED_LEVELING_3POINT //#define AUTO_BED_LEVELING_LINEAR //#define AUTO_BED_LEVELING_BILINEAR -//#define AUTO_BED_LEVELING_UBL +#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING /** @@ -1396,7 +1402,7 @@ * these options to restore the prior leveling state or to always enable * leveling immediately after G28. */ -//#define RESTORE_LEVELING_AFTER_G28 +#define RESTORE_LEVELING_AFTER_G28 false //#define ENABLE_LEVELING_AFTER_G28 /** @@ -1672,7 +1678,7 @@ * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) */ -//#define EEPROM_SETTINGS // Persistent storage with M500 and M501 +#define EEPROM_SETTINGS // Persistent storage with M500 and M501 //#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. #define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load @@ -1706,14 +1712,14 @@ // Preheat Constants - Up to 5 are supported without changes // #define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 180 -#define PREHEAT_1_TEMP_BED 70 +#define PREHEAT_1_TEMP_HOTEND 195 +#define PREHEAT_1_TEMP_BED 60 #define PREHEAT_1_TEMP_CHAMBER 35 #define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 #define PREHEAT_2_LABEL "ABS" -#define PREHEAT_2_TEMP_HOTEND 240 -#define PREHEAT_2_TEMP_BED 110 +#define PREHEAT_2_TEMP_HOTEND 230 +#define PREHEAT_2_TEMP_BED 90 #define PREHEAT_2_TEMP_CHAMBER 35 #define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 diff --git a/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (A4988)/Configuration_adv.h b/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (A4988)/Configuration_adv.h index 5335fa012a..ec1896dbbb 100755 --- a/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (A4988)/Configuration_adv.h +++ b/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (A4988)/Configuration_adv.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (A4988)" + /** * Configuration_adv.h * @@ -266,7 +268,7 @@ * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_BED_PERIOD 90 // Seconds #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius /** @@ -2141,7 +2143,7 @@ * Currently handles M108, M112, M410, M876 * NOTE: Not yet implemented for all platforms. */ -//#define EMERGENCY_PARSER +#define EMERGENCY_PARSER /** * Realtime Reporting (requires EMERGENCY_PARSER) diff --git a/config/examples/delta/Anycubic/Kossel Linear Plus/Configuration.h b/config/examples/delta/Anycubic/Kossel Linear Plus/Configuration.h index 464282b015..be9e862533 100644 --- a/config/examples/delta/Anycubic/Kossel Linear Plus/Configuration.h +++ b/config/examples/delta/Anycubic/Kossel Linear Plus/Configuration.h @@ -21,6 +21,23 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "delta/Anycubic/Kossel Linear Plus" + +/** + * Choose your version: + */ +// normal size or plus? +#define ANYCUBIC_KOSSEL_PLUS + +// Anycubic Probe version 1 or 2 see README.md; 0 for no probe +#define ANYCUBIC_PROBE_VERSION 2 + +// Heated Bed: +// 0 ... no heated bed +// 1 ... aluminium heated bed with "BuildTak-like" sticker +// 2 ... ultrabase heated bed +#define ANYCUBIC_KOSSEL_ENABLE_BED 2 + /** * Configuration.h * @@ -42,19 +59,16 @@ //=========================================================================== /** - * Here are some useful links to help get your machine configured and calibrated: + * Here are some standard links for getting your machine calibrated: * - * Example Configs: https://github.com/MarlinFirmware/Configurations/branches/all - * - * Průša Calculator: https://blog.prusaprinters.org/calculator_3416/ - * - * Calibration Guides: https://reprap.org/wiki/Calibration - * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap - * https://youtu.be/wAL9d7FgInk - * - * Calibration Objects: https://www.thingiverse.com/thing:5573 - * https://www.thingiverse.com/thing:1278865 + * http://www.lpomykal.cz/3d-printers/kossel/ + * https://reprap.org/wiki/Calibration + * https://youtu.be/wAL9d7FgInk + * http://calculator.josefprusa.cz + * https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide + * https://www.thingiverse.com/thing:5573 + * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * https://www.thingiverse.com/thing:298812 */ //=========================================================================== @@ -69,7 +83,7 @@ // @section info // Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes. +#define STRING_CONFIG_H_AUTHOR "@brandstaetter, @grbd" // Who made the changes. //#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) /** @@ -134,11 +148,11 @@ // Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_RAMPS_14_EFB + #define MOTHERBOARD BOARD_TRIGORILLA_14 #endif // Name displayed in the LCD "Ready" message and Info menu -#define CUSTOM_MACHINE_NAME "Deltabot" +#define CUSTOM_MACHINE_NAME "Kossel Linear Plus" // Printer's unique ID, used by some programs to differentiate between machines. // Choose your own or use a service like https://www.uuidgenerator.net/version4 @@ -318,7 +332,7 @@ * Enable and connect the power supply to the PS_ON_PIN. * Specify whether the power supply is active HIGH or active LOW. */ -#define PSU_CONTROL +//#define PSU_CONTROL //#define PSU_NAME "Power Supply" #if ENABLED(PSU_CONTROL) @@ -416,7 +430,7 @@ * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. */ -#define TEMP_SENSOR_0 -1 +#define TEMP_SENSOR_0 5 #define TEMP_SENSOR_1 0 #define TEMP_SENSOR_2 0 #define TEMP_SENSOR_3 0 @@ -424,7 +438,11 @@ #define TEMP_SENSOR_5 0 #define TEMP_SENSOR_6 0 #define TEMP_SENSOR_7 0 -#define TEMP_SENSOR_BED 0 +#if ANYCUBIC_KOSSEL_ENABLE_BED + #define TEMP_SENSOR_BED 5 +#else + #define TEMP_SENSOR_BED 0 +#endif #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 #define TEMP_SENSOR_COOLER 0 @@ -448,7 +466,7 @@ #define TEMP_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer #define TEMP_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target -#define TEMP_BED_RESIDENCY_TIME 0 // (seconds) Time to wait for bed to "settle" in M190 +#define TEMP_BED_RESIDENCY_TIME 10 // (seconds) Time to wait for bed to "settle" in M190 #define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer #define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target @@ -480,7 +498,7 @@ #define HEATER_5_MAXTEMP 275 #define HEATER_6_MAXTEMP 275 #define HEATER_7_MAXTEMP 275 -#define BED_MAXTEMP 150 +#define BED_MAXTEMP 120 #define CHAMBER_MAXTEMP 60 /** @@ -505,21 +523,22 @@ #define PID_K1 0.95 // Smoothing factor within any PID loop #if ENABLED(PIDTEMP) - //#define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) - //#define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) + #define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) + #define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) // Set/get with gcode: M301 E[extruder number, 0-2] + // Anycubic Kossel - run 'M106 S255' & 'M303 E0 C10 S200' #if ENABLED(PID_PARAMS_PER_HOTEND) // Specify between 1 and HOTENDS values per array. // If fewer than EXTRUDER values are provided, the last element will be repeated. - #define DEFAULT_Kp_LIST { 22.20, 22.20 } - #define DEFAULT_Ki_LIST { 1.08, 1.08 } - #define DEFAULT_Kd_LIST { 114.00, 114.00 } + #define DEFAULT_Kp_LIST { 22.36, 22.36 } + #define DEFAULT_Ki_LIST { 1.63, 1.63 } + #define DEFAULT_Kd_LIST { 76.48, 76.48 } #else - #define DEFAULT_Kp 22.20 - #define DEFAULT_Ki 1.08 - #define DEFAULT_Kd 114.00 + #define DEFAULT_Kp 22.36 + #define DEFAULT_Ki 1.63 + #define DEFAULT_Kd 76.48 #endif #endif // PIDTEMP @@ -540,8 +559,9 @@ * heater. If your configuration is significantly different than this and you don't understand * the issues involved, don't use bed PID until someone else verifies that your hardware works. */ -//#define PIDTEMPBED - +#if ANYCUBIC_KOSSEL_ENABLE_BED > 0 + #define PIDTEMPBED +#endif //#define BED_LIMIT_SWITCHING /** @@ -556,11 +576,21 @@ //#define MIN_BED_POWER 0 //#define PID_BED_DEBUG // Sends debug data to the serial port. - // 120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - // from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) - #define DEFAULT_bedKp 10.00 - #define DEFAULT_bedKi .023 - #define DEFAULT_bedKd 305.4 + // Anycubic Kossel + // this is for the aluminium bed with a BuildTak-like sticker on it + // from pid autotune. "M303 E-1 C8 S60" to run autotune on the bed at 60 degreesC for 8 cycles + #if ANYCUBIC_KOSSEL_ENABLE_BED == 1 + #define DEFAULT_bedKp 374.03 + #define DEFAULT_bedKi 72.47 + #define DEFAULT_bedKd 482.59 + #elif ANYCUBIC_KOSSEL_ENABLE_BED == 2 + // TODO get real PID values for Ultrabase Bed + #define DEFAULT_bedKp 374.03 + #define DEFAULT_bedKi 72.47 + #define DEFAULT_bedKd 482.59 + #endif + + //#define PID_BED_DEBUG // Sends debug data to the serial port. // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. #endif // PIDTEMPBED @@ -634,7 +664,7 @@ * Note: For Bowden Extruders make this large enough to allow load/unload. */ #define PREVENT_LENGTHY_EXTRUDE -#define EXTRUDE_MAXLENGTH 200 +#define EXTRUDE_MAXLENGTH 750 //=========================================================================== //======================== Thermal Runaway Protection ======================= @@ -685,7 +715,7 @@ // Make delta curves from many straight lines (linear interpolation). // This is a trade-off between visible corners (not enough segments) // and processor overload (too many expensive sqrt calls). - #define DELTA_SEGMENTS_PER_SECOND 200 + #define DELTA_SEGMENTS_PER_SECOND 80 // After homing move down to a height where XY movement is unconstrained //#define DELTA_HOME_TO_SAFE_ZONE @@ -693,10 +723,12 @@ // Delta calibration menu // uncomment to add three points calibration menu option. // See http://minow.blogspot.com/index.html#4918805519571907051 - //#define DELTA_CALIBRATION_MENU + #define DELTA_CALIBRATION_MENU // uncomment to add G33 Delta Auto-Calibration (Enable EEPROM_SETTINGS to store results) - //#define DELTA_AUTO_CALIBRATION + #if ANYCUBIC_PROBE_VERSION > 0 + #define DELTA_AUTO_CALIBRATION + #endif // NOTE NB all values for DELTA_* values MUST be floating point, so always have a decimal point in them @@ -710,20 +742,33 @@ #define PROBE_MANUALLY_STEP 0.05 // (mm) #endif - // Print surface diameter/2 minus unreachable space (avoid collisions with vertical towers). - #define DELTA_PRINTABLE_RADIUS 140.0 // (mm) - - // Center-to-center distance of the holes in the diagonal push rods. - #define DELTA_DIAGONAL_ROD 250.0 // (mm) + #if ENABLED(ANYCUBIC_KOSSEL_PLUS) + // Print surface diameter/2 minus unreachable space (avoid collisions with vertical towers). + #define DELTA_PRINTABLE_RADIUS 120.0 // (mm) + // Center-to-center distance of the holes in the diagonal push rods. + #define DELTA_DIAGONAL_ROD 267 // (mm) + // Horizontal offset from middle of printer to smooth rod center. + #define DELTA_SMOOTH_ROD_OFFSET 186 // (mm) + // Horizontal offset of the universal joints on the end effector. + #define DELTA_EFFECTOR_OFFSET 31 // (mm) + // Horizontal offset of the universal joints on the carriages. + #define DELTA_CARRIAGE_OFFSET 20.6 // (mm) + // Horizontal distance bridged by diagonal push rods when effector is centered. + #define DELTA_RADIUS (DELTA_SMOOTH_ROD_OFFSET-(DELTA_EFFECTOR_OFFSET)-(DELTA_CARRIAGE_OFFSET)) // (mm) Get this value from G33 auto calibrate + #else + // Print surface diameter/2 minus unreachable space (avoid collisions with vertical towers). + #define DELTA_PRINTABLE_RADIUS 90.0 // (mm) + // Center-to-center distance of the holes in the diagonal push rods. + #define DELTA_DIAGONAL_ROD 218.0 // (mm) + // Horizontal distance bridged by diagonal push rods when effector is centered. + #define DELTA_RADIUS 97.0 // (mm) Get this value from G33 auto calibrate + #endif // Distance between bed and nozzle Z home position - #define DELTA_HEIGHT 250.00 // (mm) Get this value from G33 auto calibrate + #define DELTA_HEIGHT 300.00 // (mm) Get this value from G33 auto calibrate #define DELTA_ENDSTOP_ADJ { 0.0, 0.0, 0.0 } // Get these values from G33 auto calibrate - // Horizontal distance bridged by diagonal push rods when effector is centered. - #define DELTA_RADIUS 124.0 // (mm) Get this value from G33 auto calibrate - // Trim adjustments for individual towers // tower angle corrections for X and Y tower / rotate XYZ so Z tower angle = 0 // measured in degrees anticlockwise looking from above the printer @@ -746,7 +791,9 @@ // extra connectors. Leave undefined any used for non-endstop and non-probe purposes. //#define USE_XMIN_PLUG //#define USE_YMIN_PLUG -#define USE_ZMIN_PLUG // a Z probe +#if ANYCUBIC_PROBE_VERSION > 0 + #define USE_ZMIN_PLUG // a Z probe +#endif #define USE_XMAX_PLUG #define USE_YMAX_PLUG #define USE_ZMAX_PLUG @@ -778,13 +825,13 @@ #endif // Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define X_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Y_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Z_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Z_MIN_PROBE_ENDSTOP_INVERTING true // Set to true to invert the logic of the probe. +#define X_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. +#define Y_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. +#define Z_MIN_ENDSTOP_INVERTING (ANYCUBIC_PROBE_VERSION + 0 == 1) // V1 is NO, V2 is NC +#define X_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. +#define Y_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. +#define Z_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. +#define Z_MIN_PROBE_ENDSTOP_INVERTING Z_MIN_ENDSTOP_INVERTING /** * Stepper Drivers @@ -875,15 +922,15 @@ #define XYZ_PULLEY_TEETH 20 // delta speeds must be the same on xyz -#define DEFAULT_XYZ_STEPS_PER_UNIT ((XYZ_FULL_STEPS_PER_ROTATION) * (XYZ_MICROSTEPS) / double(XYZ_BELT_PITCH) / double(XYZ_PULLEY_TEETH)) -#define DEFAULT_AXIS_STEPS_PER_UNIT { DEFAULT_XYZ_STEPS_PER_UNIT, DEFAULT_XYZ_STEPS_PER_UNIT, DEFAULT_XYZ_STEPS_PER_UNIT, 760*1.1 } // default steps per unit for Kossel (GT2, 20 tooth) +#define DEFAULT_XYZ_STEPS_PER_UNIT ((XYZ_FULL_STEPS_PER_ROTATION) * (XYZ_MICROSTEPS) / double(XYZ_BELT_PITCH) / double(XYZ_PULLEY_TEETH)) // 80 +#define DEFAULT_AXIS_STEPS_PER_UNIT { DEFAULT_XYZ_STEPS_PER_UNIT, DEFAULT_XYZ_STEPS_PER_UNIT, DEFAULT_XYZ_STEPS_PER_UNIT, 96 } // default steps per unit for Kossel (GT2, 20 tooth) /** * Default Max Feed Rate (mm/s) * Override with M203 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_FEEDRATE { 500, 500, 500, 25 } +#define DEFAULT_MAX_FEEDRATE { 100, 100, 100, 100} //#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 #if ENABLED(LIMITED_MAX_FR_EDITING) @@ -896,11 +943,11 @@ * Override with M201 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_ACCELERATION { 9000, 9000, 9000, 10000 } +#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 3000, 3000 } //#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 #if ENABLED(LIMITED_MAX_ACCEL_EDITING) - #define MAX_ACCEL_EDIT_VALUES { 6000, 6000, 200, 20000 } // ...or, set your own edit limits + #define MAX_ACCEL_EDIT_VALUES { 6000, 6000, 3000, 20000 } // ...or, set your own edit limits #endif /** @@ -911,9 +958,9 @@ * M204 R Retract Acceleration * M204 T Travel Acceleration */ -#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves +#define DEFAULT_ACCELERATION 600 // X, Y, Z and E acceleration for printing moves #define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves +#define DEFAULT_TRAVEL_ACCELERATION 1000 // X, Y, Z acceleration for travel (non printing) moves /** * Default Jerk limits (mm/s) @@ -925,9 +972,9 @@ */ #define CLASSIC_JERK #if ENABLED(CLASSIC_JERK) - #define DEFAULT_XJERK 10.0 - #define DEFAULT_YJERK DEFAULT_XJERK - #define DEFAULT_ZJERK DEFAULT_XJERK // Must be same as XY for delta + #define DEFAULT_XJERK 5.0 + #define DEFAULT_YJERK DEFAULT_XJERK + #define DEFAULT_ZJERK DEFAULT_XJERK // Must be same as XY for delta //#define TRAVEL_EXTRA_XYJERK 0.0 // Additional jerk allowance for all travel moves @@ -947,7 +994,7 @@ * https://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html */ #if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.013 // (mm) Distance from real junction edge + #define JUNCTION_DEVIATION_MM 0.003 // (mm) Distance from real junction edge #define JD_HANDLE_SMALL_SEGMENTS // Use curvature estimation instead of just the junction angle // for small segments (< 1mm) with large junction angles (> 135°). #endif @@ -960,7 +1007,7 @@ * * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained */ -//#define S_CURVE_ACCELERATION +#define S_CURVE_ACCELERATION //=========================================================================== //============================= Z Probe Options ============================= @@ -976,7 +1023,9 @@ * The probe replaces the Z-MIN endstop and is used for Z homing. * (Automatically enables USE_PROBE_FOR_Z_HOMING.) */ -#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN +#if ANYCUBIC_PROBE_VERSION > 0 + #define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN +#endif // Force the use of the probe for Z-axis homing //#define USE_PROBE_FOR_Z_HOMING @@ -1010,19 +1059,17 @@ * Use G29 repeatedly, adjusting the Z height at each point with movement commands * or (with LCD_BED_LEVELING) the LCD controller. */ -//#define PROBE_MANUALLY +#if ANYCUBIC_PROBE_VERSION == 0 + #define PROBE_MANUALLY +#endif /** * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. * (e.g., an inductive probe or a nozzle-based probe-switch.) */ -//#define FIX_MOUNTED_PROBE - -/** - * Use the nozzle as the probe, as with a conductive - * nozzle system or a piezo-electric smart effector. - */ -//#define NOZZLE_AS_PROBE +#if ANYCUBIC_PROBE_VERSION > 0 + #define FIX_MOUNTED_PROBE +#endif /** * Z Servo Probe, such as an endstop switch on a rotating arm. @@ -1154,20 +1201,26 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 0, -10, -3.5 } +#if ANYCUBIC_PROBE_VERSION == 2 + #define NOZZLE_TO_PROBE_OFFSET { 0, 0, -16.8 } +#elif ANYCUBIC_PROBE_VERSION == 1 + #define NOZZLE_TO_PROBE_OFFSET { 0, 0, -19.0 } +#else + #define NOZZLE_TO_PROBE_OFFSET { 0, 0, 0 } +#endif // Most probes should stay away from the edges of the bed, but // with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed (mm/min) between probes -#define XY_PROBE_FEEDRATE (66*60) +#define XY_PROBE_FEEDRATE (16*60) // Feedrate (mm/min) for the first approach when double-probing (MULTIPLE_PROBING == 2) -#define Z_PROBE_FEEDRATE_FAST (200*60) +#define Z_PROBE_FEEDRATE_FAST (50*60) // Feedrate (mm/min) for the "accurate" probe of each point -#define Z_PROBE_FEEDRATE_SLOW (Z_PROBE_FEEDRATE_FAST / 2) +#define Z_PROBE_FEEDRATE_SLOW (Z_PROBE_FEEDRATE_FAST / 3) /** * Probe Activation Switch @@ -1205,8 +1258,8 @@ * A total of 2 does fast/slow probes with a weighted average. * A total of 3 or more adds more slow probes, taking the average. */ -//#define MULTIPLE_PROBING 2 -//#define EXTRA_PROBING 1 +#define MULTIPLE_PROBING 3 +#define EXTRA_PROBING 1 /** * Z probes require clearance when deploying, stowing, and moving between @@ -1222,22 +1275,24 @@ * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. */ -#define Z_CLEARANCE_DEPLOY_PROBE 15 // Z Clearance for Deploy/Stow +#define Z_CLEARANCE_DEPLOY_PROBE 50 // Z Clearance for Deploy/Stow #define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points #define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes //#define Z_AFTER_PROBING 5 // Z position after probing is done -#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping +#define Z_PROBE_LOW_POINT -5 // Farthest distance below the trigger-point to go before stopping // For M851 give a range for adjusting the Z probe offset -#define Z_PROBE_OFFSET_RANGE_MIN -20 +#define Z_PROBE_OFFSET_RANGE_MIN -40 #define Z_PROBE_OFFSET_RANGE_MAX 20 // Enable the M48 repeatability test to test probe accuracy -//#define Z_MIN_PROBE_REPEATABILITY_TEST +#if ANYCUBIC_PROBE_VERSION > 0 + #define Z_MIN_PROBE_REPEATABILITY_TEST +#endif // Before deploy/stow pause for user confirmation -//#define PAUSE_BEFORE_DEPLOY_STOW +#define PAUSE_BEFORE_DEPLOY_STOW #if ENABLED(PAUSE_BEFORE_DEPLOY_STOW) //#define PAUSE_PROBE_DEPLOY_WHEN_TRIGGERED // For Manual Deploy Allenkey Probe #endif @@ -1289,14 +1344,14 @@ // @section machine // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR false -#define INVERT_Y_DIR false -#define INVERT_Z_DIR false +#define INVERT_X_DIR true +#define INVERT_Y_DIR true +#define INVERT_Z_DIR true // @section extruder // For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR false +#define INVERT_E0_DIR true #define INVERT_E1_DIR false #define INVERT_E2_DIR false #define INVERT_E3_DIR false @@ -1308,7 +1363,7 @@ // @section homing //#define NO_MOTION_BEFORE_HOMING // Inhibit movement until all axes have been homed. Also enable HOME_AFTER_DEACTIVATE for extra safety. -//#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated. Also enable NO_MOTION_BEFORE_HOMING for extra safety. +#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated. Also enable NO_MOTION_BEFORE_HOMING for extra safety. /** * Set Z_IDLE_HEIGHT if the Z-Axis moves on its own when steppers are disabled. @@ -1368,7 +1423,7 @@ #endif #if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS) - //#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD + #define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD #endif /** @@ -1484,18 +1539,21 @@ * leveling in steps so you can manually adjust the Z height at each grid-point. * With an LCD controller the process is guided step-by-step. */ -//#define AUTO_BED_LEVELING_3POINT +#if ANYCUBIC_PROBE_VERSION == 0 + #define AUTO_BED_LEVELING_3POINT +#else //#define AUTO_BED_LEVELING_LINEAR -//#define AUTO_BED_LEVELING_BILINEAR +#define AUTO_BED_LEVELING_BILINEAR //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +#endif /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable * leveling immediately after G28. */ -//#define RESTORE_LEVELING_AFTER_G28 +#define RESTORE_LEVELING_AFTER_G28 //#define ENABLE_LEVELING_AFTER_G28 /** @@ -1516,7 +1574,7 @@ #if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL, PROBE_MANUALLY) // Set a height for the start of manual adjustment - #define MANUAL_PROBE_START_Z 0.2 // (mm) Comment out to use the last-measured height + #define MANUAL_PROBE_START_Z 1.5 // (mm) Comment out to use the last-measured height #endif #if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL) @@ -1618,10 +1676,10 @@ * Add a bed leveling sub-menu for ABL or MBL. * Include a guided procedure if manual probing is enabled. */ -//#define LCD_BED_LEVELING +#define LCD_BED_LEVELING #if ENABLED(LCD_BED_LEVELING) - #define MESH_EDIT_Z_STEP 0.025 // (mm) Step size while manually probing Z axis. + #define MESH_EDIT_Z_STEP 0.05 // (mm) Step size while manually probing Z axis. #define LCD_PROBE_Z_RANGE 4 // (mm) Z Range centered on Z_MIN_POS for LCD Z adjustment //#define MESH_EDIT_MENU // Add a menu to edit mesh points #endif @@ -1694,8 +1752,9 @@ #define Z_SAFE_HOMING_Y_POINT Y_CENTER // Y point for Z homing #endif +// Homing speeds (mm/min) // Delta only homes to Z -#define HOMING_FEEDRATE_MM_M { (200*60), (200*60), (200*60) } +#define HOMING_FEEDRATE_MM_M { (50*60), (50*60), (50*60) } // Validate that endstops are triggered on homing moves #define VALIDATE_HOMING_ENDSTOPS @@ -1772,7 +1831,7 @@ * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) */ -//#define EEPROM_SETTINGS // Persistent storage with M500 and M501 +#define EEPROM_SETTINGS // Persistent storage with M500 and M501 //#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. #define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load @@ -1806,14 +1865,14 @@ // Preheat Constants - Up to 5 are supported without changes // #define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 180 -#define PREHEAT_1_TEMP_BED 70 +#define PREHEAT_1_TEMP_HOTEND 190 +#define PREHEAT_1_TEMP_BED 45 #define PREHEAT_1_TEMP_CHAMBER 35 #define PREHEAT_1_FAN_SPEED 255 // Value from 0 to 255 #define PREHEAT_2_LABEL "ABS" #define PREHEAT_2_TEMP_HOTEND 240 -#define PREHEAT_2_TEMP_BED 100 +#define PREHEAT_2_TEMP_BED 110 #define PREHEAT_2_TEMP_CHAMBER 35 #define PREHEAT_2_FAN_SPEED 255 // Value from 0 to 255 @@ -1828,16 +1887,16 @@ * P1 Raise the nozzle always to Z-park height. * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. */ -//#define NOZZLE_PARK_FEATURE +#define NOZZLE_PARK_FEATURE #if ENABLED(NOZZLE_PARK_FEATURE) // Specify a park position as { X, Y, Z_raise } - #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), 0, 20 } + #define NOZZLE_PARK_POINT { 0, 0, 20 } //#define NOZZLE_PARK_X_ONLY // X move only is required to park //#define NOZZLE_PARK_Y_ONLY // Y move only is required to park #define NOZZLE_PARK_Z_RAISE_MIN 2 // (mm) Always raise Z by at least this distance #define NOZZLE_PARK_XY_FEEDRATE 100 // (mm/s) X and Y axes feedrate (also used for delta Z axis) - #define NOZZLE_PARK_Z_FEEDRATE 5 // (mm/s) Z axis feedrate (not used for delta printers) + #define NOZZLE_PARK_Z_FEEDRATE 100 // (mm/s) Z axis feedrate (not used for delta printers) #endif /** @@ -1888,8 +1947,8 @@ // Specify positions for each tool as { { X, Y, Z }, { X, Y, Z } } // Dual hotend system may use { { -20, (Y_BED_SIZE / 2), (Z_MIN_POS + 1) }, { 420, (Y_BED_SIZE / 2), (Z_MIN_POS + 1) }} - #define NOZZLE_CLEAN_START_POINT { { 30, 30, (Z_MIN_POS + 1) } } - #define NOZZLE_CLEAN_END_POINT { { 100, 60, (Z_MIN_POS + 1) } } + #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1) } + #define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) } // Circular pattern radius #define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5 @@ -1945,7 +2004,7 @@ * * View the current statistics with M78. */ -//#define PRINTCOUNTER +#define PRINTCOUNTER #if ENABLED(PRINTCOUNTER) #define PRINTCOUNTER_SAVE_INTERVAL 60 // (minutes) EEPROM save interval during print #endif @@ -2036,7 +2095,7 @@ * SD Card support is disabled by default. If your controller has an SD slot, * you must uncomment the following option or it won't work. */ -//#define SDSUPPORT +#define SDSUPPORT /** * SD CARD: ENABLE CRC @@ -2060,13 +2119,13 @@ // This option overrides the default number of encoder pulses needed to // produce one step. Should be increased for high-resolution encoders. // -//#define ENCODER_PULSES_PER_STEP 4 +#define ENCODER_PULSES_PER_STEP 3 // // Use this option to override the number of step signals required to // move between next/prev menu items. // -//#define ENCODER_STEPS_PER_MENU_ITEM 1 +#define ENCODER_STEPS_PER_MENU_ITEM 1 /** * Encoder Direction Options @@ -2083,7 +2142,7 @@ // // Set this option if CLOCKWISE causes values to DECREASE // -//#define REVERSE_ENCODER_DIRECTION +#define REVERSE_ENCODER_DIRECTION // // This option reverses the encoder direction for navigating LCD menus. @@ -2114,7 +2173,7 @@ // If you have a speaker that can produce tones, enable it here. // By default Marlin assumes you have a buzzer with a fixed frequency. // -//#define SPEAKER +#define SPEAKER // // The duration and frequency for the UI feedback sound. @@ -2123,8 +2182,8 @@ // Note: Test audio output with the G-Code: // M300 S P // -//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 -//#define LCD_FEEDBACK_FREQUENCY_HZ 5000 +#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 +#define LCD_FEEDBACK_FREQUENCY_HZ 5000 //============================================================================= //======================== LCD / Controller Selection ========================= @@ -2137,7 +2196,7 @@ // // Note: Usually sold with a white PCB. // -//#define REPRAP_DISCOUNT_SMART_CONTROLLER +#define REPRAP_DISCOUNT_SMART_CONTROLLER // // GT2560 (YHCB2004) LCD Display diff --git a/config/examples/delta/Anycubic/Kossel Linear Plus/Configuration_adv.h b/config/examples/delta/Anycubic/Kossel Linear Plus/Configuration_adv.h index aa6bbae7e4..9f93459691 100644 --- a/config/examples/delta/Anycubic/Kossel Linear Plus/Configuration_adv.h +++ b/config/examples/delta/Anycubic/Kossel Linear Plus/Configuration_adv.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "delta/Anycubic/Kossel Linear Plus" + /** * Configuration_adv.h * @@ -540,7 +542,8 @@ * Multiple extruders can be assigned to the same pin in which case * the fan will turn on when any selected extruder is above the threshold. */ -#define E0_AUTO_FAN_PIN -1 +#define E0_AUTO_FAN_PIN 44 // turn off extruder fan when it's temperature is above 50°C + #define E1_AUTO_FAN_PIN -1 #define E2_AUTO_FAN_PIN -1 #define E3_AUTO_FAN_PIN -1 @@ -1047,7 +1050,7 @@ // Define the pin to read during calibration #ifndef CALIBRATION_PIN - //#define CALIBRATION_PIN -1 // Define here to override the default pin + #define CALIBRATION_PIN -1 // Define here to override the default pin #define CALIBRATION_PIN_INVERTING false // Set to true to invert the custom pin //#define CALIBRATION_PIN_PULLDOWN #define CALIBRATION_PIN_PULLUP @@ -1097,7 +1100,7 @@ * M909, M910 & LCD - only PRINTRBOARD_REVF & RIGIDBOARD_V2 */ //#define PWM_MOTOR_CURRENT { 1300, 1300, 1250 } // Values in milliamps -//#define DIGIPOT_MOTOR_CURRENT { 135,135,135,135,135 } // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A) +#define DIGIPOT_MOTOR_CURRENT { 135,135,135,135,135 } // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A) //#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis /** @@ -1177,7 +1180,7 @@ #endif // Include a page of printer information in the LCD Main Menu - //#define LCD_INFO_MENU + #define LCD_INFO_MENU #if ENABLED(LCD_INFO_MENU) //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages #endif @@ -1221,7 +1224,7 @@ #if HAS_DISPLAY // The timeout (in ms) to return to the status screen from sub-menus - //#define LCD_TIMEOUT_TO_STATUS 15000 + #define LCD_TIMEOUT_TO_STATUS 15000 #if ENABLED(SHOW_BOOTSCREEN) #define BOOTSCREEN_TIMEOUT 4000 // (ms) Total Duration to display the boot screen(s) @@ -1231,7 +1234,7 @@ #endif // Scroll a longer status message into view - //#define STATUS_MESSAGE_SCROLLING + #define STATUS_MESSAGE_SCROLLING // On the Info Screen, display XY with one decimal place when possible //#define LCD_DECIMAL_SMALL_XY @@ -1280,7 +1283,7 @@ // The standard SD detect circuit reads LOW when media is inserted and HIGH when empty. // Enable this option and set to HIGH if your SD cards are incorrectly detected. - //#define SD_DETECT_STATE HIGH + #define SD_DETECT_STATE HIGH //#define SD_IGNORE_AT_STARTUP // Don't mount the SD card when starting up //#define SDCARD_READONLY // Read-only SD card (to save over 2K of flash) @@ -1303,7 +1306,7 @@ //#define BROWSE_MEDIA_ON_INSERT // Open the file browser when media is inserted - #define EVENT_GCODE_SD_ABORT "G28" // G-code to run on SD Abort Print (e.g., "G28XY" or "G27") + #define EVENT_GCODE_SD_ABORT "G27" // G-code to run on SD Abort Print (e.g., "G28XY" or "G27") #if ENABLED(PRINTER_EVENT_LEDS) #define PE_LEDS_COMPLETED_TIME (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination @@ -1386,7 +1389,7 @@ //#define LONG_FILENAME_HOST_SUPPORT // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES + #define SCROLL_LONG_FILENAMES // Leave the heaters on after Stop Print (not recommended!) //#define SD_ABORT_NO_COOLDOWN @@ -1792,18 +1795,18 @@ * * Warning: Does not respect endstops! */ -//#define BABYSTEPPING +#define BABYSTEPPING #if ENABLED(BABYSTEPPING) //#define INTEGRATED_BABYSTEPPING // EXPERIMENTAL integration of babystepping into the Stepper ISR //#define BABYSTEP_WITHOUT_HOMING - //#define BABYSTEP_ALWAYS_AVAILABLE // Allow babystepping at all times (not just during movement). + #define BABYSTEP_ALWAYS_AVAILABLE // Allow babystepping at all times (not just during movement). //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way //#define BABYSTEP_MILLIMETER_UNITS // Specify BABYSTEP_MULTIPLICATOR_(XY|Z) in mm instead of micro-steps #define BABYSTEP_MULTIPLICATOR_Z 1 // (steps or mm) Steps or millimeter distance for each Z babystep #define BABYSTEP_MULTIPLICATOR_XY 1 // (steps or mm) Steps or millimeter distance for each XY babystep - //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. + #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. // Note: Extra time may be added to mitigate controller latency. @@ -2313,28 +2316,28 @@ * * Enable PARK_HEAD_ON_PAUSE to add the G-code M125 Pause and Park. */ -//#define ADVANCED_PAUSE_FEATURE +#define ADVANCED_PAUSE_FEATURE #if ENABLED(ADVANCED_PAUSE_FEATURE) #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. // This short retract is done immediately, before parking the nozzle. - #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast. + #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 40 // (mm/s) Unload filament feedrate. This can be pretty fast. #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload. + #define FILAMENT_CHANGE_UNLOAD_LENGTH 750 // (mm) The length of filament for a complete unload. // For Bowden, the full length of the tube and nozzle. // For direct drive, the full length of the nozzle. // Set to 0 for manual unloading. #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE 6 // (mm/s) Slow move when starting load. #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 0 // (mm) Slow length, to allow time to insert material. // 0 to disable start loading and skip to fast load only - #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast. + #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 40 // (mm/s) Load filament feedrate. This can be pretty fast. #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle. + #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 650 // (mm) Load length of filament, from extruder gear to nozzle. // For Bowden, the full length of the tube and nozzle. // For direct drive, the full length of the nozzle. - //#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted. + #define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted. #define ADVANCED_PAUSE_PURGE_FEEDRATE 3 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate. - #define ADVANCED_PAUSE_PURGE_LENGTH 50 // (mm) Length to extrude after loading. + #define ADVANCED_PAUSE_PURGE_LENGTH 150 // (mm) Length to extrude after loading. // Set to 0 for manual extrusion. // Filament can be extruded repeatedly from the Filament Change menu // until extrusion is consistent, and to purge old filament. @@ -2351,10 +2354,10 @@ #define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed. #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change. - //#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. - //#define HOME_BEFORE_FILAMENT_CHANGE // If needed, home before parking for filament change + #define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. + #define HOME_BEFORE_FILAMENT_CHANGE // If needed, home before parking for filament change - //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. + #define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) #endif diff --git a/config/examples/delta/Anycubic/Kossel/Configuration.h b/config/examples/delta/Anycubic/Kossel/Configuration.h index 464282b015..f55f9bfaa3 100644 --- a/config/examples/delta/Anycubic/Kossel/Configuration.h +++ b/config/examples/delta/Anycubic/Kossel/Configuration.h @@ -21,6 +21,23 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "delta/Anycubic/Kossel" + +/** + * Choose your version: + */ +// normal size or plus? +//#define ANYCUBIC_KOSSEL_PLUS + +// Anycubic Probe version 1 or 2 see README.md; 0 for no probe +#define ANYCUBIC_PROBE_VERSION 0 + +// Heated Bed: +// 0 ... no heated bed +// 1 ... aluminium heated bed with "BuildTak-like" sticker +// 2 ... ultrabase heated bed +#define ANYCUBIC_KOSSEL_ENABLE_BED 0 + /** * Configuration.h * @@ -69,7 +86,7 @@ // @section info // Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes. +#define STRING_CONFIG_H_AUTHOR "@brandstaetter, @grbd" // Who made the changes. //#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) /** @@ -127,18 +144,18 @@ * * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ -#define BAUDRATE 250000 +#define BAUDRATE 115200 // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH // Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_RAMPS_14_EFB + #define MOTHERBOARD BOARD_TRIGORILLA_14 #endif // Name displayed in the LCD "Ready" message and Info menu -#define CUSTOM_MACHINE_NAME "Deltabot" +#define CUSTOM_MACHINE_NAME "ANYCUBIC Kossel" // Printer's unique ID, used by some programs to differentiate between machines. // Choose your own or use a service like https://www.uuidgenerator.net/version4 @@ -318,7 +335,7 @@ * Enable and connect the power supply to the PS_ON_PIN. * Specify whether the power supply is active HIGH or active LOW. */ -#define PSU_CONTROL +//#define PSU_CONTROL //#define PSU_NAME "Power Supply" #if ENABLED(PSU_CONTROL) @@ -416,7 +433,7 @@ * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. */ -#define TEMP_SENSOR_0 -1 +#define TEMP_SENSOR_0 5 #define TEMP_SENSOR_1 0 #define TEMP_SENSOR_2 0 #define TEMP_SENSOR_3 0 @@ -424,7 +441,11 @@ #define TEMP_SENSOR_5 0 #define TEMP_SENSOR_6 0 #define TEMP_SENSOR_7 0 -#define TEMP_SENSOR_BED 0 +#if ANYCUBIC_KOSSEL_ENABLE_BED + #define TEMP_SENSOR_BED 5 +#else + #define TEMP_SENSOR_BED 0 +#endif #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 #define TEMP_SENSOR_COOLER 0 @@ -448,7 +469,7 @@ #define TEMP_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer #define TEMP_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target -#define TEMP_BED_RESIDENCY_TIME 0 // (seconds) Time to wait for bed to "settle" in M190 +#define TEMP_BED_RESIDENCY_TIME 10 // (seconds) Time to wait for bed to "settle" in M190 #define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer #define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target @@ -480,7 +501,7 @@ #define HEATER_5_MAXTEMP 275 #define HEATER_6_MAXTEMP 275 #define HEATER_7_MAXTEMP 275 -#define BED_MAXTEMP 150 +#define BED_MAXTEMP 120 #define CHAMBER_MAXTEMP 60 /** @@ -505,21 +526,22 @@ #define PID_K1 0.95 // Smoothing factor within any PID loop #if ENABLED(PIDTEMP) - //#define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) - //#define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) + #define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) + #define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) // Set/get with gcode: M301 E[extruder number, 0-2] + // Anycubic Kossel - run 'M106 S255' & 'M303 E0 C10 S200' #if ENABLED(PID_PARAMS_PER_HOTEND) // Specify between 1 and HOTENDS values per array. // If fewer than EXTRUDER values are provided, the last element will be repeated. - #define DEFAULT_Kp_LIST { 22.20, 22.20 } - #define DEFAULT_Ki_LIST { 1.08, 1.08 } - #define DEFAULT_Kd_LIST { 114.00, 114.00 } + #define DEFAULT_Kp_LIST { 22.36, 22.36 } + #define DEFAULT_Ki_LIST { 1.63, 1.63 } + #define DEFAULT_Kd_LIST { 76.48, 76.48 } #else - #define DEFAULT_Kp 22.20 - #define DEFAULT_Ki 1.08 - #define DEFAULT_Kd 114.00 + #define DEFAULT_Kp 22.36 + #define DEFAULT_Ki 1.63 + #define DEFAULT_Kd 76.48 #endif #endif // PIDTEMP @@ -540,8 +562,9 @@ * heater. If your configuration is significantly different than this and you don't understand * the issues involved, don't use bed PID until someone else verifies that your hardware works. */ -//#define PIDTEMPBED - +#if ANYCUBIC_KOSSEL_ENABLE_BED > 0 + #define PIDTEMPBED +#endif //#define BED_LIMIT_SWITCHING /** @@ -553,14 +576,22 @@ #define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current #if ENABLED(PIDTEMPBED) - //#define MIN_BED_POWER 0 - //#define PID_BED_DEBUG // Sends debug data to the serial port. - // 120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - // from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) - #define DEFAULT_bedKp 10.00 - #define DEFAULT_bedKi .023 - #define DEFAULT_bedKd 305.4 + // Anycubic Kossel + // this is for the aluminium bed with a BuildTak-like sticker on it + // from pid autotune. "M303 E-1 C8 S60" to run autotune on the bed at 60 degreesC for 8 cycles + #if ANYCUBIC_KOSSEL_ENABLE_BED == 1 + #define DEFAULT_bedKp 374.03 + #define DEFAULT_bedKi 72.47 + #define DEFAULT_bedKd 482.59 + #elif ANYCUBIC_KOSSEL_ENABLE_BED == 2 + // TODO get real PID values for Ultrabase Bed + #define DEFAULT_bedKp 374.03 + #define DEFAULT_bedKi 72.47 + #define DEFAULT_bedKd 482.59 + #endif + + //#define PID_BED_DEBUG // Sends debug data to the serial port. // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. #endif // PIDTEMPBED @@ -634,7 +665,7 @@ * Note: For Bowden Extruders make this large enough to allow load/unload. */ #define PREVENT_LENGTHY_EXTRUDE -#define EXTRUDE_MAXLENGTH 200 +#define EXTRUDE_MAXLENGTH 750 //=========================================================================== //======================== Thermal Runaway Protection ======================= @@ -685,18 +716,20 @@ // Make delta curves from many straight lines (linear interpolation). // This is a trade-off between visible corners (not enough segments) // and processor overload (too many expensive sqrt calls). - #define DELTA_SEGMENTS_PER_SECOND 200 + #define DELTA_SEGMENTS_PER_SECOND 80 // After homing move down to a height where XY movement is unconstrained - //#define DELTA_HOME_TO_SAFE_ZONE + #define DELTA_HOME_TO_SAFE_ZONE // Delta calibration menu // uncomment to add three points calibration menu option. // See http://minow.blogspot.com/index.html#4918805519571907051 - //#define DELTA_CALIBRATION_MENU + #define DELTA_CALIBRATION_MENU // uncomment to add G33 Delta Auto-Calibration (Enable EEPROM_SETTINGS to store results) - //#define DELTA_AUTO_CALIBRATION + #if ANYCUBIC_PROBE_VERSION > 0 + #define DELTA_AUTO_CALIBRATION + #endif // NOTE NB all values for DELTA_* values MUST be floating point, so always have a decimal point in them @@ -710,20 +743,33 @@ #define PROBE_MANUALLY_STEP 0.05 // (mm) #endif - // Print surface diameter/2 minus unreachable space (avoid collisions with vertical towers). - #define DELTA_PRINTABLE_RADIUS 140.0 // (mm) - - // Center-to-center distance of the holes in the diagonal push rods. - #define DELTA_DIAGONAL_ROD 250.0 // (mm) + #if ENABLED(ANYCUBIC_KOSSEL_PLUS) + // Print surface diameter/2 minus unreachable space (avoid collisions with vertical towers). + #define DELTA_PRINTABLE_RADIUS 116.0 // (mm) + // Center-to-center distance of the holes in the diagonal push rods. + #define DELTA_DIAGONAL_ROD 267 // (mm) + // Horizontal offset from middle of printer to smooth rod center. + #define DELTA_SMOOTH_ROD_OFFSET 186 // (mm) + // Horizontal offset of the universal joints on the end effector. + #define DELTA_EFFECTOR_OFFSET 31 // (mm) + // Horizontal offset of the universal joints on the carriages. + #define DELTA_CARRIAGE_OFFSET 20.6 // (mm) + // Horizontal distance bridged by diagonal push rods when effector is centered. + #define DELTA_RADIUS (DELTA_SMOOTH_ROD_OFFSET-(DELTA_EFFECTOR_OFFSET)-(DELTA_CARRIAGE_OFFSET)) // (mm) Get this value from G33 auto calibrate + #else + // Print surface diameter/2 minus unreachable space (avoid collisions with vertical towers). + #define DELTA_PRINTABLE_RADIUS 90.0 // (mm) + // Center-to-center distance of the holes in the diagonal push rods. + #define DELTA_DIAGONAL_ROD 218.0 // (mm) + // Horizontal distance bridged by diagonal push rods when effector is centered. + #define DELTA_RADIUS 97.0 // (mm) Get this value from G33 auto calibrate + #endif // Distance between bed and nozzle Z home position - #define DELTA_HEIGHT 250.00 // (mm) Get this value from G33 auto calibrate + #define DELTA_HEIGHT 320.00 // (mm) Get this value from G33 auto calibrate #define DELTA_ENDSTOP_ADJ { 0.0, 0.0, 0.0 } // Get these values from G33 auto calibrate - // Horizontal distance bridged by diagonal push rods when effector is centered. - #define DELTA_RADIUS 124.0 // (mm) Get this value from G33 auto calibrate - // Trim adjustments for individual towers // tower angle corrections for X and Y tower / rotate XYZ so Z tower angle = 0 // measured in degrees anticlockwise looking from above the printer @@ -746,7 +792,9 @@ // extra connectors. Leave undefined any used for non-endstop and non-probe purposes. //#define USE_XMIN_PLUG //#define USE_YMIN_PLUG -#define USE_ZMIN_PLUG // a Z probe +#if ANYCUBIC_PROBE_VERSION > 0 + #define USE_ZMIN_PLUG // a Z probe +#endif #define USE_XMAX_PLUG #define USE_YMAX_PLUG #define USE_ZMAX_PLUG @@ -778,13 +826,13 @@ #endif // Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define X_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Y_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Z_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Z_MIN_PROBE_ENDSTOP_INVERTING true // Set to true to invert the logic of the probe. +#define X_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. +#define Y_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. +#define Z_MIN_ENDSTOP_INVERTING (ANYCUBIC_PROBE_VERSION + 0 == 1) // V1 is NO, V2 is NC +#define X_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. +#define Y_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. +#define Z_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. +#define Z_MIN_PROBE_ENDSTOP_INVERTING Z_MIN_ENDSTOP_INVERTING /** * Stepper Drivers @@ -875,15 +923,15 @@ #define XYZ_PULLEY_TEETH 20 // delta speeds must be the same on xyz -#define DEFAULT_XYZ_STEPS_PER_UNIT ((XYZ_FULL_STEPS_PER_ROTATION) * (XYZ_MICROSTEPS) / double(XYZ_BELT_PITCH) / double(XYZ_PULLEY_TEETH)) -#define DEFAULT_AXIS_STEPS_PER_UNIT { DEFAULT_XYZ_STEPS_PER_UNIT, DEFAULT_XYZ_STEPS_PER_UNIT, DEFAULT_XYZ_STEPS_PER_UNIT, 760*1.1 } // default steps per unit for Kossel (GT2, 20 tooth) +#define DEFAULT_XYZ_STEPS_PER_UNIT ((XYZ_FULL_STEPS_PER_ROTATION) * (XYZ_MICROSTEPS) / double(XYZ_BELT_PITCH) / double(XYZ_PULLEY_TEETH)) // 80 +#define DEFAULT_AXIS_STEPS_PER_UNIT { DEFAULT_XYZ_STEPS_PER_UNIT, DEFAULT_XYZ_STEPS_PER_UNIT, DEFAULT_XYZ_STEPS_PER_UNIT, 96 } // default steps per unit for Kossel (GT2, 20 tooth) /** * Default Max Feed Rate (mm/s) * Override with M203 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_FEEDRATE { 500, 500, 500, 25 } +#define DEFAULT_MAX_FEEDRATE { 100, 100, 100, 100} //#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 #if ENABLED(LIMITED_MAX_FR_EDITING) @@ -896,7 +944,7 @@ * Override with M201 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_ACCELERATION { 9000, 9000, 9000, 10000 } +#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 3000, 3000 } //#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 #if ENABLED(LIMITED_MAX_ACCEL_EDITING) @@ -925,9 +973,9 @@ */ #define CLASSIC_JERK #if ENABLED(CLASSIC_JERK) - #define DEFAULT_XJERK 10.0 - #define DEFAULT_YJERK DEFAULT_XJERK - #define DEFAULT_ZJERK DEFAULT_XJERK // Must be same as XY for delta + #define DEFAULT_XJERK 5.0 + #define DEFAULT_YJERK DEFAULT_XJERK + #define DEFAULT_ZJERK DEFAULT_XJERK // Must be same as XY for delta //#define TRAVEL_EXTRA_XYJERK 0.0 // Additional jerk allowance for all travel moves @@ -947,7 +995,7 @@ * https://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html */ #if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.013 // (mm) Distance from real junction edge + #define JUNCTION_DEVIATION_MM 0.003 // (mm) Distance from real junction edge #define JD_HANDLE_SMALL_SEGMENTS // Use curvature estimation instead of just the junction angle // for small segments (< 1mm) with large junction angles (> 135°). #endif @@ -960,7 +1008,7 @@ * * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained */ -//#define S_CURVE_ACCELERATION +#define S_CURVE_ACCELERATION //=========================================================================== //============================= Z Probe Options ============================= @@ -976,7 +1024,9 @@ * The probe replaces the Z-MIN endstop and is used for Z homing. * (Automatically enables USE_PROBE_FOR_Z_HOMING.) */ -#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN +#if ANYCUBIC_PROBE_VERSION > 0 + #define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN +#endif // Force the use of the probe for Z-axis homing //#define USE_PROBE_FOR_Z_HOMING @@ -1010,19 +1060,17 @@ * Use G29 repeatedly, adjusting the Z height at each point with movement commands * or (with LCD_BED_LEVELING) the LCD controller. */ -//#define PROBE_MANUALLY +#if ANYCUBIC_PROBE_VERSION == 0 + #define PROBE_MANUALLY +#endif /** * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. * (e.g., an inductive probe or a nozzle-based probe-switch.) */ -//#define FIX_MOUNTED_PROBE - -/** - * Use the nozzle as the probe, as with a conductive - * nozzle system or a piezo-electric smart effector. - */ -//#define NOZZLE_AS_PROBE +#if ANYCUBIC_PROBE_VERSION > 0 + #define FIX_MOUNTED_PROBE +#endif /** * Z Servo Probe, such as an endstop switch on a rotating arm. @@ -1154,20 +1202,26 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 0, -10, -3.5 } +#if ANYCUBIC_PROBE_VERSION == 2 + #define NOZZLE_TO_PROBE_OFFSET { 0, 0, -16.8 } +#elif ANYCUBIC_PROBE_VERSION == 1 + #define NOZZLE_TO_PROBE_OFFSET { 0, 0, -19.0 } +#else + #define NOZZLE_TO_PROBE_OFFSET { 0, 0, 0 } +#endif // Most probes should stay away from the edges of the bed, but // with NOZZLE_AS_PROBE this can be negative for a wider probing area. -#define PROBING_MARGIN 10 +#define PROBING_MARGIN 15 // X and Y axis travel speed (mm/min) between probes -#define XY_PROBE_FEEDRATE (66*60) +#define XY_PROBE_FEEDRATE (100*60) // Feedrate (mm/min) for the first approach when double-probing (MULTIPLE_PROBING == 2) -#define Z_PROBE_FEEDRATE_FAST (200*60) +#define Z_PROBE_FEEDRATE_FAST (100*60) // Feedrate (mm/min) for the "accurate" probe of each point -#define Z_PROBE_FEEDRATE_SLOW (Z_PROBE_FEEDRATE_FAST / 2) +#define Z_PROBE_FEEDRATE_SLOW (Z_PROBE_FEEDRATE_FAST / 3) /** * Probe Activation Switch @@ -1205,7 +1259,7 @@ * A total of 2 does fast/slow probes with a weighted average. * A total of 3 or more adds more slow probes, taking the average. */ -//#define MULTIPLE_PROBING 2 +#define MULTIPLE_PROBING 3 //#define EXTRA_PROBING 1 /** @@ -1222,22 +1276,24 @@ * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. */ -#define Z_CLEARANCE_DEPLOY_PROBE 15 // Z Clearance for Deploy/Stow +#define Z_CLEARANCE_DEPLOY_PROBE 50 // Z Clearance for Deploy/Stow #define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points #define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes //#define Z_AFTER_PROBING 5 // Z position after probing is done -#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping +#define Z_PROBE_LOW_POINT -5 // Farthest distance below the trigger-point to go before stopping // For M851 give a range for adjusting the Z probe offset -#define Z_PROBE_OFFSET_RANGE_MIN -20 +#define Z_PROBE_OFFSET_RANGE_MIN -40 #define Z_PROBE_OFFSET_RANGE_MAX 20 // Enable the M48 repeatability test to test probe accuracy -//#define Z_MIN_PROBE_REPEATABILITY_TEST +#if ANYCUBIC_PROBE_VERSION > 0 + #define Z_MIN_PROBE_REPEATABILITY_TEST +#endif // Before deploy/stow pause for user confirmation -//#define PAUSE_BEFORE_DEPLOY_STOW +#define PAUSE_BEFORE_DEPLOY_STOW #if ENABLED(PAUSE_BEFORE_DEPLOY_STOW) //#define PAUSE_PROBE_DEPLOY_WHEN_TRIGGERED // For Manual Deploy Allenkey Probe #endif @@ -1289,14 +1345,14 @@ // @section machine // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR false -#define INVERT_Y_DIR false -#define INVERT_Z_DIR false +#define INVERT_X_DIR true +#define INVERT_Y_DIR true +#define INVERT_Z_DIR true // @section extruder // For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR false +#define INVERT_E0_DIR true #define INVERT_E1_DIR false #define INVERT_E2_DIR false #define INVERT_E3_DIR false @@ -1308,7 +1364,7 @@ // @section homing //#define NO_MOTION_BEFORE_HOMING // Inhibit movement until all axes have been homed. Also enable HOME_AFTER_DEACTIVATE for extra safety. -//#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated. Also enable NO_MOTION_BEFORE_HOMING for extra safety. +#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated. Also enable NO_MOTION_BEFORE_HOMING for extra safety. /** * Set Z_IDLE_HEIGHT if the Z-Axis moves on its own when steppers are disabled. @@ -1368,7 +1424,7 @@ #endif #if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS) - //#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD + #define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD #endif /** @@ -1484,18 +1540,21 @@ * leveling in steps so you can manually adjust the Z height at each grid-point. * With an LCD controller the process is guided step-by-step. */ -//#define AUTO_BED_LEVELING_3POINT +#if ANYCUBIC_PROBE_VERSION == 0 + #define AUTO_BED_LEVELING_3POINT +#else //#define AUTO_BED_LEVELING_LINEAR -//#define AUTO_BED_LEVELING_BILINEAR +#define AUTO_BED_LEVELING_BILINEAR //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING +#endif /** * Normally G28 leaves leveling disabled on completion. Enable one of * these options to restore the prior leveling state or to always enable * leveling immediately after G28. */ -//#define RESTORE_LEVELING_AFTER_G28 +#define RESTORE_LEVELING_AFTER_G28 //#define ENABLE_LEVELING_AFTER_G28 /** @@ -1516,7 +1575,7 @@ #if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL, PROBE_MANUALLY) // Set a height for the start of manual adjustment - #define MANUAL_PROBE_START_Z 0.2 // (mm) Comment out to use the last-measured height + #define MANUAL_PROBE_START_Z 1.5 // (mm) Comment out to use the last-measured height #endif #if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL) @@ -1618,10 +1677,10 @@ * Add a bed leveling sub-menu for ABL or MBL. * Include a guided procedure if manual probing is enabled. */ -//#define LCD_BED_LEVELING +#define LCD_BED_LEVELING #if ENABLED(LCD_BED_LEVELING) - #define MESH_EDIT_Z_STEP 0.025 // (mm) Step size while manually probing Z axis. + #define MESH_EDIT_Z_STEP 0.05 // (mm) Step size while manually probing Z axis. #define LCD_PROBE_Z_RANGE 4 // (mm) Z Range centered on Z_MIN_POS for LCD Z adjustment //#define MESH_EDIT_MENU // Add a menu to edit mesh points #endif @@ -1695,7 +1754,7 @@ #endif // Delta only homes to Z -#define HOMING_FEEDRATE_MM_M { (200*60), (200*60), (200*60) } +#define HOMING_FEEDRATE_MM_M { (100*60), (100*60), (100*60) } // Validate that endstops are triggered on homing moves #define VALIDATE_HOMING_ENDSTOPS @@ -1772,7 +1831,7 @@ * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) */ -//#define EEPROM_SETTINGS // Persistent storage with M500 and M501 +#define EEPROM_SETTINGS // Persistent storage with M500 and M501 //#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. #define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load @@ -1806,8 +1865,8 @@ // Preheat Constants - Up to 5 are supported without changes // #define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 180 -#define PREHEAT_1_TEMP_BED 70 +#define PREHEAT_1_TEMP_HOTEND 190 +#define PREHEAT_1_TEMP_BED 60 #define PREHEAT_1_TEMP_CHAMBER 35 #define PREHEAT_1_FAN_SPEED 255 // Value from 0 to 255 @@ -1828,16 +1887,16 @@ * P1 Raise the nozzle always to Z-park height. * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. */ -//#define NOZZLE_PARK_FEATURE +#define NOZZLE_PARK_FEATURE #if ENABLED(NOZZLE_PARK_FEATURE) // Specify a park position as { X, Y, Z_raise } - #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), 0, 20 } + #define NOZZLE_PARK_POINT { 0, 0, 20 } //#define NOZZLE_PARK_X_ONLY // X move only is required to park //#define NOZZLE_PARK_Y_ONLY // Y move only is required to park #define NOZZLE_PARK_Z_RAISE_MIN 2 // (mm) Always raise Z by at least this distance #define NOZZLE_PARK_XY_FEEDRATE 100 // (mm/s) X and Y axes feedrate (also used for delta Z axis) - #define NOZZLE_PARK_Z_FEEDRATE 5 // (mm/s) Z axis feedrate (not used for delta printers) + #define NOZZLE_PARK_Z_FEEDRATE 100 // (mm/s) Z axis feedrate (not used for delta printers) #endif /** @@ -1945,7 +2004,7 @@ * * View the current statistics with M78. */ -//#define PRINTCOUNTER +#define PRINTCOUNTER #if ENABLED(PRINTCOUNTER) #define PRINTCOUNTER_SAVE_INTERVAL 60 // (minutes) EEPROM save interval during print #endif @@ -2036,7 +2095,7 @@ * SD Card support is disabled by default. If your controller has an SD slot, * you must uncomment the following option or it won't work. */ -//#define SDSUPPORT +#define SDSUPPORT /** * SD CARD: ENABLE CRC @@ -2060,13 +2119,13 @@ // This option overrides the default number of encoder pulses needed to // produce one step. Should be increased for high-resolution encoders. // -//#define ENCODER_PULSES_PER_STEP 4 +#define ENCODER_PULSES_PER_STEP 3 // // Use this option to override the number of step signals required to // move between next/prev menu items. // -//#define ENCODER_STEPS_PER_MENU_ITEM 1 +#define ENCODER_STEPS_PER_MENU_ITEM 1 /** * Encoder Direction Options @@ -2083,7 +2142,7 @@ // // Set this option if CLOCKWISE causes values to DECREASE // -//#define REVERSE_ENCODER_DIRECTION +#define REVERSE_ENCODER_DIRECTION // // This option reverses the encoder direction for navigating LCD menus. @@ -2114,7 +2173,7 @@ // If you have a speaker that can produce tones, enable it here. // By default Marlin assumes you have a buzzer with a fixed frequency. // -//#define SPEAKER +#define SPEAKER // // The duration and frequency for the UI feedback sound. @@ -2123,8 +2182,8 @@ // Note: Test audio output with the G-Code: // M300 S P // -//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 -//#define LCD_FEEDBACK_FREQUENCY_HZ 5000 +#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 +#define LCD_FEEDBACK_FREQUENCY_HZ 5000 //============================================================================= //======================== LCD / Controller Selection ========================= @@ -2137,7 +2196,7 @@ // // Note: Usually sold with a white PCB. // -//#define REPRAP_DISCOUNT_SMART_CONTROLLER +#define REPRAP_DISCOUNT_SMART_CONTROLLER // // GT2560 (YHCB2004) LCD Display diff --git a/config/examples/delta/Anycubic/Kossel/Configuration_adv.h b/config/examples/delta/Anycubic/Kossel/Configuration_adv.h index aa6bbae7e4..270f77bbfa 100644 --- a/config/examples/delta/Anycubic/Kossel/Configuration_adv.h +++ b/config/examples/delta/Anycubic/Kossel/Configuration_adv.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "delta/Anycubic/Kossel" + /** * Configuration_adv.h * @@ -540,7 +542,7 @@ * Multiple extruders can be assigned to the same pin in which case * the fan will turn on when any selected extruder is above the threshold. */ -#define E0_AUTO_FAN_PIN -1 +//#define E0_AUTO_FAN_PIN -1 #define E1_AUTO_FAN_PIN -1 #define E2_AUTO_FAN_PIN -1 #define E3_AUTO_FAN_PIN -1 @@ -1097,7 +1099,7 @@ * M909, M910 & LCD - only PRINTRBOARD_REVF & RIGIDBOARD_V2 */ //#define PWM_MOTOR_CURRENT { 1300, 1300, 1250 } // Values in milliamps -//#define DIGIPOT_MOTOR_CURRENT { 135,135,135,135,135 } // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A) +#define DIGIPOT_MOTOR_CURRENT { 135,135,135,135,135 } // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A) //#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis /** @@ -1177,7 +1179,7 @@ #endif // Include a page of printer information in the LCD Main Menu - //#define LCD_INFO_MENU + #define LCD_INFO_MENU #if ENABLED(LCD_INFO_MENU) //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages #endif @@ -1221,7 +1223,7 @@ #if HAS_DISPLAY // The timeout (in ms) to return to the status screen from sub-menus - //#define LCD_TIMEOUT_TO_STATUS 15000 + #define LCD_TIMEOUT_TO_STATUS 15000 #if ENABLED(SHOW_BOOTSCREEN) #define BOOTSCREEN_TIMEOUT 4000 // (ms) Total Duration to display the boot screen(s) @@ -1231,7 +1233,7 @@ #endif // Scroll a longer status message into view - //#define STATUS_MESSAGE_SCROLLING + #define STATUS_MESSAGE_SCROLLING // On the Info Screen, display XY with one decimal place when possible //#define LCD_DECIMAL_SMALL_XY @@ -1303,7 +1305,7 @@ //#define BROWSE_MEDIA_ON_INSERT // Open the file browser when media is inserted - #define EVENT_GCODE_SD_ABORT "G28" // G-code to run on SD Abort Print (e.g., "G28XY" or "G27") + #define EVENT_GCODE_SD_ABORT "G27" // G-code to run on SD Abort Print (e.g., "G28XY" or "G27") #if ENABLED(PRINTER_EVENT_LEDS) #define PE_LEDS_COMPLETED_TIME (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination @@ -1386,7 +1388,7 @@ //#define LONG_FILENAME_HOST_SUPPORT // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES + #define SCROLL_LONG_FILENAMES // Leave the heaters on after Stop Print (not recommended!) //#define SD_ABORT_NO_COOLDOWN @@ -1792,7 +1794,7 @@ * * Warning: Does not respect endstops! */ -//#define BABYSTEPPING +#define BABYSTEPPING #if ENABLED(BABYSTEPPING) //#define INTEGRATED_BABYSTEPPING // EXPERIMENTAL integration of babystepping into the Stepper ISR //#define BABYSTEP_WITHOUT_HOMING @@ -1803,7 +1805,7 @@ #define BABYSTEP_MULTIPLICATOR_Z 1 // (steps or mm) Steps or millimeter distance for each Z babystep #define BABYSTEP_MULTIPLICATOR_XY 1 // (steps or mm) Steps or millimeter distance for each XY babystep - //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. + #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. // Note: Extra time may be added to mitigate controller latency. @@ -2313,28 +2315,28 @@ * * Enable PARK_HEAD_ON_PAUSE to add the G-code M125 Pause and Park. */ -//#define ADVANCED_PAUSE_FEATURE +#define ADVANCED_PAUSE_FEATURE #if ENABLED(ADVANCED_PAUSE_FEATURE) #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. // This short retract is done immediately, before parking the nozzle. - #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast. + #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 40 // (mm/s) Unload filament feedrate. This can be pretty fast. #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload. + #define FILAMENT_CHANGE_UNLOAD_LENGTH 750 // (mm) The length of filament for a complete unload. // For Bowden, the full length of the tube and nozzle. // For direct drive, the full length of the nozzle. // Set to 0 for manual unloading. #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE 6 // (mm/s) Slow move when starting load. #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 0 // (mm) Slow length, to allow time to insert material. // 0 to disable start loading and skip to fast load only - #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast. + #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 40 // (mm/s) Load filament feedrate. This can be pretty fast. #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle. + #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 650 // (mm) Load length of filament, from extruder gear to nozzle. // For Bowden, the full length of the tube and nozzle. // For direct drive, the full length of the nozzle. - //#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted. + #define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted. #define ADVANCED_PAUSE_PURGE_FEEDRATE 3 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate. - #define ADVANCED_PAUSE_PURGE_LENGTH 50 // (mm) Length to extrude after loading. + #define ADVANCED_PAUSE_PURGE_LENGTH 150 // (mm) Length to extrude after loading. // Set to 0 for manual extrusion. // Filament can be extruded repeatedly from the Filament Change menu // until extrusion is consistent, and to purge old filament. @@ -2351,10 +2353,10 @@ #define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed. #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change. - //#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. - //#define HOME_BEFORE_FILAMENT_CHANGE // If needed, home before parking for filament change + #define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. + #define HOME_BEFORE_FILAMENT_CHANGE // If needed, home before parking for filament change - //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. + #define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) #endif diff --git a/config/examples/delta/Anycubic/Predator/Configuration.h b/config/examples/delta/Anycubic/Predator/Configuration.h index 464282b015..4edf15974a 100644 --- a/config/examples/delta/Anycubic/Predator/Configuration.h +++ b/config/examples/delta/Anycubic/Predator/Configuration.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "delta/Anycubic/Predator" + /** * Configuration.h * @@ -69,7 +71,7 @@ // @section info // Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes. +#define STRING_CONFIG_H_AUTHOR "(SXH, Predator STM)" // Who made the changes. //#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) /** @@ -84,7 +86,7 @@ */ // Show the Marlin bootscreen on startup. ** ENABLE FOR PRODUCTION ** -#define SHOW_BOOTSCREEN +//#define SHOW_BOOTSCREEN // Show the bitmap in Marlin/_Bootscreen.h on startup. //#define SHOW_CUSTOM_BOOTSCREEN @@ -102,14 +104,14 @@ * * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] */ -#define SERIAL_PORT 0 +#define SERIAL_PORT 1 /** * Select a secondary serial port on the board to use for communication with the host. * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] */ -//#define SERIAL_PORT_2 -1 +#define SERIAL_PORT_2 3 /** * Select a third serial port on the board to use for communication with the host. @@ -127,18 +129,18 @@ * * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ -#define BAUDRATE 250000 +#define BAUDRATE 115200 // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH // Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_RAMPS_14_EFB + #define MOTHERBOARD BOARD_TRIGORILLA_PRO #endif // Name displayed in the LCD "Ready" message and Info menu -#define CUSTOM_MACHINE_NAME "Deltabot" +#define CUSTOM_MACHINE_NAME "PREDATOR" // Printer's unique ID, used by some programs to differentiate between machines. // Choose your own or use a service like https://www.uuidgenerator.net/version4 @@ -318,7 +320,7 @@ * Enable and connect the power supply to the PS_ON_PIN. * Specify whether the power supply is active HIGH or active LOW. */ -#define PSU_CONTROL +//#define PSU_CONTROL //#define PSU_NAME "Power Supply" #if ENABLED(PSU_CONTROL) @@ -416,7 +418,7 @@ * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. */ -#define TEMP_SENSOR_0 -1 +#define TEMP_SENSOR_0 5 #define TEMP_SENSOR_1 0 #define TEMP_SENSOR_2 0 #define TEMP_SENSOR_3 0 @@ -424,7 +426,7 @@ #define TEMP_SENSOR_5 0 #define TEMP_SENSOR_6 0 #define TEMP_SENSOR_7 0 -#define TEMP_SENSOR_BED 0 +#define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 #define TEMP_SENSOR_COOLER 0 @@ -448,7 +450,7 @@ #define TEMP_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer #define TEMP_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target -#define TEMP_BED_RESIDENCY_TIME 0 // (seconds) Time to wait for bed to "settle" in M190 +#define TEMP_BED_RESIDENCY_TIME 10 // (seconds) Time to wait for bed to "settle" in M190 #define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer #define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target @@ -505,21 +507,21 @@ #define PID_K1 0.95 // Smoothing factor within any PID loop #if ENABLED(PIDTEMP) - //#define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) - //#define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) + #define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) + #define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) // Set/get with gcode: M301 E[extruder number, 0-2] #if ENABLED(PID_PARAMS_PER_HOTEND) // Specify between 1 and HOTENDS values per array. // If fewer than EXTRUDER values are provided, the last element will be repeated. - #define DEFAULT_Kp_LIST { 22.20, 22.20 } - #define DEFAULT_Ki_LIST { 1.08, 1.08 } - #define DEFAULT_Kd_LIST { 114.00, 114.00 } + #define DEFAULT_Kp_LIST { 14.84, 14.84 } + #define DEFAULT_Ki_LIST { 1.01, 1.01 } + #define DEFAULT_Kd_LIST { 54.43, 54.43 } #else - #define DEFAULT_Kp 22.20 - #define DEFAULT_Ki 1.08 - #define DEFAULT_Kd 114.00 + #define DEFAULT_Kp 14.84 + #define DEFAULT_Ki 1.01 + #define DEFAULT_Kd 54.43 #endif #endif // PIDTEMP @@ -540,7 +542,7 @@ * heater. If your configuration is significantly different than this and you don't understand * the issues involved, don't use bed PID until someone else verifies that your hardware works. */ -//#define PIDTEMPBED +#define PIDTEMPBED //#define BED_LIMIT_SWITCHING @@ -558,9 +560,10 @@ // 120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) // from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) - #define DEFAULT_bedKp 10.00 - #define DEFAULT_bedKi .023 - #define DEFAULT_bedKd 305.4 + + #define DEFAULT_bedKp 66.85 + #define DEFAULT_bedKi 13.04 + #define DEFAULT_bedKd 228.49 // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. #endif // PIDTEMPBED @@ -634,7 +637,7 @@ * Note: For Bowden Extruders make this large enough to allow load/unload. */ #define PREVENT_LENGTHY_EXTRUDE -#define EXTRUDE_MAXLENGTH 200 +#define EXTRUDE_MAXLENGTH 750 //=========================================================================== //======================== Thermal Runaway Protection ======================= @@ -693,10 +696,10 @@ // Delta calibration menu // uncomment to add three points calibration menu option. // See http://minow.blogspot.com/index.html#4918805519571907051 - //#define DELTA_CALIBRATION_MENU + #define DELTA_CALIBRATION_MENU // uncomment to add G33 Delta Auto-Calibration (Enable EEPROM_SETTINGS to store results) - //#define DELTA_AUTO_CALIBRATION + #define DELTA_AUTO_CALIBRATION // NOTE NB all values for DELTA_* values MUST be floating point, so always have a decimal point in them @@ -711,23 +714,23 @@ #endif // Print surface diameter/2 minus unreachable space (avoid collisions with vertical towers). - #define DELTA_PRINTABLE_RADIUS 140.0 // (mm) + #define DELTA_PRINTABLE_RADIUS 185.0 // (mm) // Center-to-center distance of the holes in the diagonal push rods. - #define DELTA_DIAGONAL_ROD 250.0 // (mm) + #define DELTA_DIAGONAL_ROD 440.0 // (mm) // Distance between bed and nozzle Z home position - #define DELTA_HEIGHT 250.00 // (mm) Get this value from G33 auto calibrate + #define DELTA_HEIGHT 437.21 // (mm) Get this value from G33 auto calibrate - #define DELTA_ENDSTOP_ADJ { 0.0, 0.0, 0.0 } // Get these values from G33 auto calibrate + #define DELTA_ENDSTOP_ADJ { -0.25, 0.0, -0.84 } // Get these values from G33 auto calibrate // Horizontal distance bridged by diagonal push rods when effector is centered. - #define DELTA_RADIUS 124.0 // (mm) Get this value from G33 auto calibrate + #define DELTA_RADIUS 227.4 // (mm) Get this value from G33 auto calibrate // Trim adjustments for individual towers // tower angle corrections for X and Y tower / rotate XYZ so Z tower angle = 0 // measured in degrees anticlockwise looking from above the printer - #define DELTA_TOWER_ANGLE_TRIM { 0.0, 0.0, 0.0 } // Get these values from G33 auto calibrate + #define DELTA_TOWER_ANGLE_TRIM { +0.13, -0.18, +0.05 } // Get these values from G33 auto calibrate // Delta radius and diagonal rod adjustments (mm) //#define DELTA_RADIUS_TRIM_TOWER { 0.0, 0.0, 0.0 } @@ -778,13 +781,13 @@ #endif // Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define X_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Y_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Z_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Z_MIN_PROBE_ENDSTOP_INVERTING true // Set to true to invert the logic of the probe. +#define X_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. +#define Y_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. +#define Z_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. +#define X_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. +#define Y_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. +#define Z_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. +#define Z_MIN_PROBE_ENDSTOP_INVERTING false // Set to true to invert the logic of the probe. /** * Stepper Drivers @@ -847,7 +850,6 @@ //============================================================================= // @section motion -// delta speeds must be the same on xyz /** * Default Settings * @@ -876,14 +878,14 @@ // delta speeds must be the same on xyz #define DEFAULT_XYZ_STEPS_PER_UNIT ((XYZ_FULL_STEPS_PER_ROTATION) * (XYZ_MICROSTEPS) / double(XYZ_BELT_PITCH) / double(XYZ_PULLEY_TEETH)) -#define DEFAULT_AXIS_STEPS_PER_UNIT { DEFAULT_XYZ_STEPS_PER_UNIT, DEFAULT_XYZ_STEPS_PER_UNIT, DEFAULT_XYZ_STEPS_PER_UNIT, 760*1.1 } // default steps per unit for Kossel (GT2, 20 tooth) +#define DEFAULT_AXIS_STEPS_PER_UNIT { DEFAULT_XYZ_STEPS_PER_UNIT, DEFAULT_XYZ_STEPS_PER_UNIT, DEFAULT_XYZ_STEPS_PER_UNIT, 400 } // default steps per unit for Kossel (GT2, 20 tooth) /** * Default Max Feed Rate (mm/s) * Override with M203 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_FEEDRATE { 500, 500, 500, 25 } +#define DEFAULT_MAX_FEEDRATE { 1000, 1000, 1000, 1000 } //#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 #if ENABLED(LIMITED_MAX_FR_EDITING) @@ -896,7 +898,7 @@ * Override with M201 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_ACCELERATION { 9000, 9000, 9000, 10000 } +#define DEFAULT_MAX_ACCELERATION { 2000, 2000, 2000, 4000 } //#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 #if ENABLED(LIMITED_MAX_ACCEL_EDITING) @@ -960,7 +962,7 @@ * * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained */ -//#define S_CURVE_ACCELERATION +#define S_CURVE_ACCELERATION //=========================================================================== //============================= Z Probe Options ============================= @@ -1016,7 +1018,7 @@ * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. * (e.g., an inductive probe or a nozzle-based probe-switch.) */ -//#define FIX_MOUNTED_PROBE +#define FIX_MOUNTED_PROBE /** * Use the nozzle as the probe, as with a conductive @@ -1154,20 +1156,20 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 0, -10, -3.5 } +#define NOZZLE_TO_PROBE_OFFSET { 0, 0, -16.30 } // Most probes should stay away from the edges of the bed, but // with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed (mm/min) between probes -#define XY_PROBE_FEEDRATE (66*60) +#define XY_PROBE_FEEDRATE (50*60) // Feedrate (mm/min) for the first approach when double-probing (MULTIPLE_PROBING == 2) -#define Z_PROBE_FEEDRATE_FAST (200*60) +#define Z_PROBE_FEEDRATE_FAST (50*60) // Feedrate (mm/min) for the "accurate" probe of each point -#define Z_PROBE_FEEDRATE_SLOW (Z_PROBE_FEEDRATE_FAST / 2) +#define Z_PROBE_FEEDRATE_SLOW (Z_PROBE_FEEDRATE_FAST / 3) /** * Probe Activation Switch @@ -1205,7 +1207,7 @@ * A total of 2 does fast/slow probes with a weighted average. * A total of 3 or more adds more slow probes, taking the average. */ -//#define MULTIPLE_PROBING 2 +#define MULTIPLE_PROBING 2 //#define EXTRA_PROBING 1 /** @@ -1222,22 +1224,22 @@ * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. */ -#define Z_CLEARANCE_DEPLOY_PROBE 15 // Z Clearance for Deploy/Stow +#define Z_CLEARANCE_DEPLOY_PROBE 50 // Z Clearance for Deploy/Stow #define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points #define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes -//#define Z_AFTER_PROBING 5 // Z position after probing is done +#define Z_AFTER_PROBING 300 // Z position after probing is done #define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping // For M851 give a range for adjusting the Z probe offset -#define Z_PROBE_OFFSET_RANGE_MIN -20 -#define Z_PROBE_OFFSET_RANGE_MAX 20 +#define Z_PROBE_OFFSET_RANGE_MIN -30 +#define Z_PROBE_OFFSET_RANGE_MAX 30 // Enable the M48 repeatability test to test probe accuracy //#define Z_MIN_PROBE_REPEATABILITY_TEST // Before deploy/stow pause for user confirmation -//#define PAUSE_BEFORE_DEPLOY_STOW +#define PAUSE_BEFORE_DEPLOY_STOW #if ENABLED(PAUSE_BEFORE_DEPLOY_STOW) //#define PAUSE_PROBE_DEPLOY_WHEN_TRIGGERED // For Manual Deploy Allenkey Probe #endif @@ -1296,8 +1298,8 @@ // @section extruder // For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR false -#define INVERT_E1_DIR false +#define INVERT_E0_DIR true +#define INVERT_E1_DIR true #define INVERT_E2_DIR false #define INVERT_E3_DIR false #define INVERT_E4_DIR false @@ -1307,7 +1309,7 @@ // @section homing -//#define NO_MOTION_BEFORE_HOMING // Inhibit movement until all axes have been homed. Also enable HOME_AFTER_DEACTIVATE for extra safety. +#define NO_MOTION_BEFORE_HOMING // Inhibit movement until all axes have been homed. Also enable HOME_AFTER_DEACTIVATE for extra safety. //#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated. Also enable NO_MOTION_BEFORE_HOMING for extra safety. /** @@ -1384,12 +1386,12 @@ * RAMPS-based boards use SERVO3_PIN for the first runout sensor. * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. */ -//#define FILAMENT_RUNOUT_SENSOR +#define FILAMENT_RUNOUT_SENSOR #if ENABLED(FILAMENT_RUNOUT_SENSOR) #define FIL_RUNOUT_ENABLED_DEFAULT true // Enable the sensor on startup. Override with M412 followed by M500. #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. - #define FIL_RUNOUT_STATE LOW // Pin state indicating that filament is NOT present. + #define FIL_RUNOUT_STATE HIGH // Pin state indicating that filament is NOT present. #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. //#define WATCH_ALL_RUNOUT_SENSORS // Execute runout script on any triggering sensor, not only for the active extruder. @@ -1487,7 +1489,7 @@ //#define AUTO_BED_LEVELING_3POINT //#define AUTO_BED_LEVELING_LINEAR //#define AUTO_BED_LEVELING_BILINEAR -//#define AUTO_BED_LEVELING_UBL +#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING /** @@ -1495,7 +1497,7 @@ * these options to restore the prior leveling state or to always enable * leveling immediately after G28. */ -//#define RESTORE_LEVELING_AFTER_G28 +#define RESTORE_LEVELING_AFTER_G28 //#define ENABLE_LEVELING_AFTER_G28 /** @@ -1523,7 +1525,7 @@ // Gradually reduce leveling correction until a set height is reached, // at which point movement will be level to the machine's XY plane. // The height can be set with M420 Z - //#define ENABLE_LEVELING_FADE_HEIGHT + #define ENABLE_LEVELING_FADE_HEIGHT #if ENABLED(ENABLE_LEVELING_FADE_HEIGHT) #define DEFAULT_LEVELING_FADE_HEIGHT 10.0 // (mm) Default fade height. #endif @@ -1537,7 +1539,7 @@ /** * Enable the G26 Mesh Validation Pattern tool. */ - //#define G26_MESH_VALIDATION + #define G26_MESH_VALIDATION #if ENABLED(G26_MESH_VALIDATION) #define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle. #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for G26. @@ -1554,7 +1556,7 @@ // Set the number of grid points per dimension. // Works best with 5 or more points in each dimension. - #define GRID_MAX_POINTS_X 9 + #define GRID_MAX_POINTS_X 15 #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X // Probe along the Y axis, advancing X after each column @@ -1584,7 +1586,7 @@ //========================= Unified Bed Leveling ============================ //=========================================================================== - //#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh + #define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh #define MESH_INSET 1 // Set Mesh bounds as an inset region of the bed #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. @@ -1618,12 +1620,12 @@ * Add a bed leveling sub-menu for ABL or MBL. * Include a guided procedure if manual probing is enabled. */ -//#define LCD_BED_LEVELING +#define LCD_BED_LEVELING #if ENABLED(LCD_BED_LEVELING) #define MESH_EDIT_Z_STEP 0.025 // (mm) Step size while manually probing Z axis. #define LCD_PROBE_Z_RANGE 4 // (mm) Z Range centered on Z_MIN_POS for LCD Z adjustment - //#define MESH_EDIT_MENU // Add a menu to edit mesh points + #define MESH_EDIT_MENU // Add a menu to edit mesh points #endif // Add a menu item to move between bed corners for manual bed adjustment @@ -1665,7 +1667,7 @@ * Commands to execute at the end of G29 probing. * Useful to retract or move the Z probe out of the way. */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" +#define Z_PROBE_END_SCRIPT "G28\n" // @section homing @@ -1695,7 +1697,7 @@ #endif // Delta only homes to Z -#define HOMING_FEEDRATE_MM_M { (200*60), (200*60), (200*60) } +#define HOMING_FEEDRATE_MM_M { (50*60), (50*60), (50*60) } // Validate that endstops are triggered on homing moves #define VALIDATE_HOMING_ENDSTOPS @@ -1772,12 +1774,12 @@ * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) */ -//#define EEPROM_SETTINGS // Persistent storage with M500 and M501 +#define EEPROM_SETTINGS // Persistent storage with M500 and M501 //#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. #define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load #if ENABLED(EEPROM_SETTINGS) - //#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. + #define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. #endif // @@ -1828,11 +1830,11 @@ * P1 Raise the nozzle always to Z-park height. * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. */ -//#define NOZZLE_PARK_FEATURE +#define NOZZLE_PARK_FEATURE #if ENABLED(NOZZLE_PARK_FEATURE) // Specify a park position as { X, Y, Z_raise } - #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), 0, 20 } + #define NOZZLE_PARK_POINT { 0, 0, 400 } //#define NOZZLE_PARK_X_ONLY // X move only is required to park //#define NOZZLE_PARK_Y_ONLY // Y move only is required to park #define NOZZLE_PARK_Z_RAISE_MIN 2 // (mm) Always raise Z by at least this distance @@ -2036,14 +2038,15 @@ * SD Card support is disabled by default. If your controller has an SD slot, * you must uncomment the following option or it won't work. */ -//#define SDSUPPORT +#define SDSUPPORT +#define SDIO_SUPPORT /** * SD CARD: ENABLE CRC * * Use CRC checks and retries on the SD communication. */ -//#define SD_CHECK_AND_RETRY +#define SD_CHECK_AND_RETRY /** * LCD Menu Items @@ -2114,7 +2117,7 @@ // If you have a speaker that can produce tones, enable it here. // By default Marlin assumes you have a buzzer with a fixed frequency. // -//#define SPEAKER +#define SPEAKER // // The duration and frequency for the UI feedback sound. @@ -2593,7 +2596,7 @@ // // 480x320, 3.5", FSMC Stock Display from AnyCubic // -//#define ANYCUBIC_TFT35 +#define ANYCUBIC_TFT35 // // 320x240, 2.8", FSMC Stock Display from Longer/Alfawise @@ -2643,7 +2646,7 @@ * For LVGL_UI also copy the 'assets' folder from the build directory to the * root of your SD card, together with the compiled firmware. */ -//#define TFT_CLASSIC_UI +#define TFT_CLASSIC_UI //#define TFT_COLOR_UI //#define TFT_LVGL_UI @@ -2659,7 +2662,7 @@ * TFT_ROTATE_270, TFT_ROTATE_270_MIRROR_X, TFT_ROTATE_270_MIRROR_Y, * TFT_MIRROR_X, TFT_MIRROR_Y, TFT_NO_ROTATION */ -//#define TFT_ROTATION TFT_NO_ROTATION +#define TFT_ROTATION TFT_ROTATE_180 //============================================================================= //============================ Other Controllers ============================ @@ -2673,17 +2676,17 @@ // // Touch Screen Settings // -//#define TOUCH_SCREEN +#define TOUCH_SCREEN #if ENABLED(TOUCH_SCREEN) #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus #define TOUCH_SCREEN_CALIBRATION - //#define TOUCH_CALIBRATION_X 12316 - //#define TOUCH_CALIBRATION_Y -8981 - //#define TOUCH_OFFSET_X -43 - //#define TOUCH_OFFSET_Y 257 + #define TOUCH_CALIBRATION_X 16810 + #define TOUCH_CALIBRATION_Y -11570 + #define TOUCH_OFFSET_X -13 + #define TOUCH_OFFSET_Y 338 //#define TOUCH_ORIENTATION TOUCH_LANDSCAPE #if BOTH(TOUCH_SCREEN_CALIBRATION, EEPROM_SETTINGS) @@ -2718,7 +2721,7 @@ // Use software PWM to drive the fan, as for the heaters. This uses a very low frequency // which is not as annoying as with the hardware PWM. On the other hand, if this frequency // is too low, you should also increment SOFT_PWM_SCALE. -//#define FAN_SOFT_PWM +#define FAN_SOFT_PWM // Incrementing this by 1 will double the software PWM frequency, // affecting heaters, and the fan if FAN_SOFT_PWM is enabled. diff --git a/config/examples/delta/Anycubic/Predator/Configuration_adv.h b/config/examples/delta/Anycubic/Predator/Configuration_adv.h index aa6bbae7e4..12d6f79d94 100644 --- a/config/examples/delta/Anycubic/Predator/Configuration_adv.h +++ b/config/examples/delta/Anycubic/Predator/Configuration_adv.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "delta/Anycubic/Predator" + /** * Configuration_adv.h * @@ -461,7 +463,7 @@ * The fan turns on automatically whenever any driver is enabled and turns * off (or reduces to idle speed) shortly after drivers are turned off. */ -//#define USE_CONTROLLER_FAN +#define USE_CONTROLLER_FAN #if ENABLED(USE_CONTROLLER_FAN) //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan //#define CONTROLLER_FAN_USE_Z_ONLY // With this option only the Z axis is considered @@ -479,7 +481,7 @@ // When first starting the main fan, run it at full speed for the // given number of milliseconds. This gets the fan spinning reliably // before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) -//#define FAN_KICKSTART_TIME 100 +#define FAN_KICKSTART_TIME 100 // Some coolers may require a non-zero "off" state. //#define FAN_OFF_PWM 1 @@ -540,7 +542,7 @@ * Multiple extruders can be assigned to the same pin in which case * the fan will turn on when any selected extruder is above the threshold. */ -#define E0_AUTO_FAN_PIN -1 +#define E0_AUTO_FAN_PIN FAN1_PIN #define E1_AUTO_FAN_PIN -1 #define E2_AUTO_FAN_PIN -1 #define E3_AUTO_FAN_PIN -1 @@ -737,7 +739,6 @@ //#define SENSORLESS_BACKOFF_MM { 2, 2 } // (mm) Backoff from endstops before sensorless homing #define HOMING_BUMP_MM { 5, 5, 5 } // (mm) Backoff from endstops after first bump - // For delta all values must be the same #define HOMING_BUMP_DIVISOR { 10, 10, 10 } // Re-Bump Speed Divisor (Divides the Homing Feedrate) //#define HOMING_BACKOFF_POST_MM { 2, 2, 2 } // (mm) Backoff from endstops after homing @@ -868,7 +869,7 @@ // On a 300mm bed a 5% grade would give a misalignment of ~1.5cm #define G34_MAX_GRADE 5 // (%) Maximum incline that G34 will handle - #define Z_STEPPER_ALIGN_ITERATIONS 3 // Number of iterations to apply during alignment + #define Z_STEPPER_ALIGN_ITERATIONS 5 // Number of iterations to apply during alignment #define Z_STEPPER_ALIGN_ACC 0.02 // Stop iterating early if the accuracy is better than this #define RESTORE_LEVELING_AFTER_G34 // Restore leveling after G34 is done? // After G34, re-home Z (G28 Z) or just calculate it from the last probe heights? @@ -926,10 +927,10 @@ * Set DISABLE_INACTIVE_? 'true' to shut down axis steppers after an idle period. * The Deactive Time can be overridden with M18 and M84. Set to 0 for No Timeout. */ -#define DEFAULT_STEPPER_DEACTIVE_TIME 60 -#define DISABLE_INACTIVE_X true -#define DISABLE_INACTIVE_Y true -#define DISABLE_INACTIVE_Z true // Set 'false' if the nozzle could fall onto your printed part! +#define DEFAULT_STEPPER_DEACTIVE_TIME 120 +#define DISABLE_INACTIVE_X false +#define DISABLE_INACTIVE_Y false +#define DISABLE_INACTIVE_Z false // Set 'false' if the nozzle could fall onto your printed part! #define DISABLE_INACTIVE_E true // Default Minimum Feedrates for printing and travel moves @@ -939,6 +940,8 @@ // Minimum time that a segment needs to take as the buffer gets emptied #define DEFAULT_MINSEGMENTTIME 20000 // (µs) Set with M205 B. +// If defined the movements slow down when the look ahead buffer is only half full +// (don't use SLOWDOWN with DELTA because DELTA generates hundreds of segments per second) // Slow down the machine if the lookahead buffer is (by default) half full. // Increase the slowdown divisor for larger buffer sizes. //#define SLOWDOWN @@ -1060,7 +1063,7 @@ * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the * lowest stepping frequencies. */ -//#define ADAPTIVE_STEP_SMOOTHING +#define ADAPTIVE_STEP_SMOOTHING /** * Custom Microstepping @@ -1177,7 +1180,7 @@ #endif // Include a page of printer information in the LCD Main Menu - //#define LCD_INFO_MENU + #define LCD_INFO_MENU #if ENABLED(LCD_INFO_MENU) //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages #endif @@ -1231,7 +1234,7 @@ #endif // Scroll a longer status message into view - //#define STATUS_MESSAGE_SCROLLING + #define STATUS_MESSAGE_SCROLLING // On the Info Screen, display XY with one decimal place when possible //#define LCD_DECIMAL_SMALL_XY @@ -1240,18 +1243,18 @@ //#define LCD_SET_PROGRESS_MANUALLY // Show the E position (filament used) during printing - //#define LCD_SHOW_E_TOTAL + #define LCD_SHOW_E_TOTAL #endif #if EITHER(SDSUPPORT, LCD_SET_PROGRESS_MANUALLY) && ANY(HAS_MARLINUI_U8GLIB, HAS_MARLINUI_HD44780, IS_TFTGLCD_PANEL, EXTENSIBLE_UI) - //#define SHOW_REMAINING_TIME // Display estimated time to completion + #define SHOW_REMAINING_TIME // Display estimated time to completion #if ENABLED(SHOW_REMAINING_TIME) //#define USE_M73_REMAINING_TIME // Use remaining time from M73 command instead of estimation - //#define ROTATE_PROGRESS_DISPLAY // Display (P)rogress, (E)lapsed, and (R)emaining time + #define ROTATE_PROGRESS_DISPLAY // Display (P)rogress, (E)lapsed, and (R)emaining time #endif #if EITHER(HAS_MARLINUI_U8GLIB, EXTENSIBLE_UI) - //#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits + #define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits #endif #if EITHER(HAS_MARLINUI_HD44780, IS_TFTGLCD_PANEL) @@ -1290,7 +1293,7 @@ #define SD_PROCEDURE_DEPTH 1 // Increase if you need more nested M32 calls #define SD_FINISHED_STEPPERRELEASE true // Disable steppers when SD Print is finished - #define SD_FINISHED_RELEASECOMMAND "M84" // Use "M84XYE" to keep Z enabled so your bed stays in place + #define SD_FINISHED_RELEASECOMMAND "M84 E" // Use "M84XYE" to keep Z enabled so your bed stays in place // Reverse SD sort to show "more recent" files first, according to the card's FAT. // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended. @@ -1514,7 +1517,7 @@ */ #if HAS_MARLINUI_U8GLIB // Show SD percentage next to the progress bar - //#define DOGM_SD_PERCENT + #define DOGM_SD_PERCENT // Save many cycles by drawing a hollow frame or no frame on the Info Screen //#define XYZ_NO_FRAME @@ -1792,7 +1795,7 @@ * * Warning: Does not respect endstops! */ -//#define BABYSTEPPING +#define BABYSTEPPING #if ENABLED(BABYSTEPPING) //#define INTEGRATED_BABYSTEPPING // EXPERIMENTAL integration of babystepping into the Stepper ISR //#define BABYSTEP_WITHOUT_HOMING @@ -2023,7 +2026,7 @@ #endif // Moves (or segments) with fewer steps than this will be joined with the next move -#define MIN_STEPS_PER_SEGMENT 1 +#define MIN_STEPS_PER_SEGMENT 6 /** * Minimum delay before and after setting the stepper DIR (in ns) @@ -2313,23 +2316,23 @@ * * Enable PARK_HEAD_ON_PAUSE to add the G-code M125 Pause and Park. */ -//#define ADVANCED_PAUSE_FEATURE +#define ADVANCED_PAUSE_FEATURE #if ENABLED(ADVANCED_PAUSE_FEATURE) #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. // This short retract is done immediately, before parking the nozzle. - #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast. + #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 40 // (mm/s) Unload filament feedrate. This can be pretty fast. #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload. + #define FILAMENT_CHANGE_UNLOAD_LENGTH 300 // (mm) The length of filament for a complete unload. // For Bowden, the full length of the tube and nozzle. // For direct drive, the full length of the nozzle. // Set to 0 for manual unloading. #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE 6 // (mm/s) Slow move when starting load. - #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 0 // (mm) Slow length, to allow time to insert material. + #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 60 // (mm) Slow length, to allow time to insert material. // 0 to disable start loading and skip to fast load only - #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast. + #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 40 // (mm/s) Load filament feedrate. This can be pretty fast. #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle. + #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 240 // (mm) Load length of filament, from extruder gear to nozzle. // For Bowden, the full length of the tube and nozzle. // For direct drive, the full length of the nozzle. //#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted. @@ -2347,14 +2350,14 @@ #define FILAMENT_UNLOAD_PURGE_LENGTH 8 // (mm) An unretract is done, then this length is purged. #define FILAMENT_UNLOAD_PURGE_FEEDRATE 25 // (mm/s) feedrate to purge before unload - #define PAUSE_PARK_NOZZLE_TIMEOUT 45 // (seconds) Time limit before the nozzle is turned off for safety. + #define PAUSE_PARK_NOZZLE_TIMEOUT 120 // (seconds) Time limit before the nozzle is turned off for safety. #define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed. #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change. - //#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. + #define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. //#define HOME_BEFORE_FILAMENT_CHANGE // If needed, home before parking for filament change - //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. + #define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) #endif diff --git a/config/examples/delta/Dreammaker/Overlord/Configuration.h b/config/examples/delta/Dreammaker/Overlord/Configuration.h index 464282b015..c10de93084 100644 --- a/config/examples/delta/Dreammaker/Overlord/Configuration.h +++ b/config/examples/delta/Dreammaker/Overlord/Configuration.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "delta/Dreammaker/Overlord" + /** * Configuration.h * @@ -69,7 +71,7 @@ // @section info // Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes. +#define STRING_CONFIG_H_AUTHOR "(Team Overlord/TimMoore)" // Who made the changes. //#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) /** @@ -87,7 +89,7 @@ #define SHOW_BOOTSCREEN // Show the bitmap in Marlin/_Bootscreen.h on startup. -//#define SHOW_CUSTOM_BOOTSCREEN +#define SHOW_CUSTOM_BOOTSCREEN // Show the bitmap in Marlin/_Statusscreen.h on the status screen. //#define CUSTOM_STATUS_SCREEN_IMAGE @@ -134,11 +136,11 @@ // Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_RAMPS_14_EFB + #define MOTHERBOARD BOARD_OVERLORD #endif // Name displayed in the LCD "Ready" message and Info menu -#define CUSTOM_MACHINE_NAME "Deltabot" +#define CUSTOM_MACHINE_NAME "Overlord" // Printer's unique ID, used by some programs to differentiate between machines. // Choose your own or use a service like https://www.uuidgenerator.net/version4 @@ -319,25 +321,25 @@ * Specify whether the power supply is active HIGH or active LOW. */ #define PSU_CONTROL -//#define PSU_NAME "Power Supply" +#define PSU_NAME "OVERLORD" #if ENABLED(PSU_CONTROL) - #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box + #define PSU_ACTIVE_STATE HIGH // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + #define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power //#define PSU_POWERUP_GCODE "M355 S1" // G-code to run after power-on (e.g., case light on) //#define PSU_POWEROFF_GCODE "M355 S0" // G-code to run before power-off (e.g., case light off) - //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin + #define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin #if ENABLED(AUTO_POWER_CONTROL) #define AUTO_POWER_FANS // Turn on PSU if fans need power #define AUTO_POWER_E_FANS #define AUTO_POWER_CONTROLLERFAN - #define AUTO_POWER_CHAMBER_FAN + //#define AUTO_POWER_CHAMBER_FAN #define AUTO_POWER_COOLER_FAN - //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature + #define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature //#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature #define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration @@ -416,8 +418,8 @@ * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. */ -#define TEMP_SENSOR_0 -1 -#define TEMP_SENSOR_1 0 +#define TEMP_SENSOR_0 201 +#define TEMP_SENSOR_1 201 #define TEMP_SENSOR_2 0 #define TEMP_SENSOR_3 0 #define TEMP_SENSOR_4 0 @@ -441,14 +443,14 @@ // Use temp sensor 1 as a redundant sensor with sensor 0. If the readings // from the two sensors differ too much the print will be aborted. -//#define TEMP_SENSOR_1_AS_REDUNDANT +#define TEMP_SENSOR_1_AS_REDUNDANT #define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10 #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 #define TEMP_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer #define TEMP_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target -#define TEMP_BED_RESIDENCY_TIME 0 // (seconds) Time to wait for bed to "settle" in M190 +#define TEMP_BED_RESIDENCY_TIME 10 // (seconds) Time to wait for bed to "settle" in M190 #define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer #define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target @@ -472,8 +474,8 @@ // Above this temperature the heater will be switched off. // This can protect components from overheating, but NOT from shorts and failures. // (Use MINTEMP for thermistor short/failure protection.) -#define HEATER_0_MAXTEMP 275 -#define HEATER_1_MAXTEMP 275 +#define HEATER_0_MAXTEMP 245 // lower max temp since updated nozzle is a E3D V6 lite clone +#define HEATER_1_MAXTEMP 245 #define HEATER_2_MAXTEMP 275 #define HEATER_3_MAXTEMP 275 #define HEATER_4_MAXTEMP 275 @@ -500,26 +502,27 @@ // Comment the following line to disable PID and enable bang-bang. #define PIDTEMP -#define BANG_MAX 255 // Limits current to nozzle while in bang-bang mode; 255=full current +#define BANG_MAX 160 // Limits current to nozzle while in bang-bang mode; 255=full current #define PID_MAX BANG_MAX // Limits current to nozzle while PID is active (see PID_FUNCTIONAL_RANGE below); 255=full current #define PID_K1 0.95 // Smoothing factor within any PID loop #if ENABLED(PIDTEMP) //#define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) - //#define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) + #define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) // Set/get with gcode: M301 E[extruder number, 0-2] + // Overlord with new nozzle with integrated probe, update using M303 #if ENABLED(PID_PARAMS_PER_HOTEND) // Specify between 1 and HOTENDS values per array. // If fewer than EXTRUDER values are provided, the last element will be repeated. - #define DEFAULT_Kp_LIST { 22.20, 22.20 } - #define DEFAULT_Ki_LIST { 1.08, 1.08 } - #define DEFAULT_Kd_LIST { 114.00, 114.00 } + #define DEFAULT_Kp_LIST { 8.62, 8.62 } + #define DEFAULT_Ki_LIST { 0.55, 0.55 } + #define DEFAULT_Kd_LIST { 33.89, 33.89 } #else - #define DEFAULT_Kp 22.20 - #define DEFAULT_Ki 1.08 - #define DEFAULT_Kd 114.00 + #define DEFAULT_Kp 8.62 + #define DEFAULT_Ki 0.55 + #define DEFAULT_Kd 33.89 #endif #endif // PIDTEMP @@ -556,11 +559,10 @@ //#define MIN_BED_POWER 0 //#define PID_BED_DEBUG // Sends debug data to the serial port. - // 120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - // from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) - #define DEFAULT_bedKp 10.00 - #define DEFAULT_bedKi .023 - #define DEFAULT_bedKd 305.4 + // Overlord Pro heater into 5.5mm aluminium bed, update using M303 + #define DEFAULT_bedKp 253.16 + #define DEFAULT_bedKi 24.14 + #define DEFAULT_bedKd 663.66 // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. #endif // PIDTEMPBED @@ -688,15 +690,15 @@ #define DELTA_SEGMENTS_PER_SECOND 200 // After homing move down to a height where XY movement is unconstrained - //#define DELTA_HOME_TO_SAFE_ZONE + #define DELTA_HOME_TO_SAFE_ZONE // Delta calibration menu // uncomment to add three points calibration menu option. // See http://minow.blogspot.com/index.html#4918805519571907051 - //#define DELTA_CALIBRATION_MENU + #define DELTA_CALIBRATION_MENU // uncomment to add G33 Delta Auto-Calibration (Enable EEPROM_SETTINGS to store results) - //#define DELTA_AUTO_CALIBRATION + #define DELTA_AUTO_CALIBRATION // NOTE NB all values for DELTA_* values MUST be floating point, so always have a decimal point in them @@ -707,31 +709,31 @@ #if EITHER(DELTA_AUTO_CALIBRATION, DELTA_CALIBRATION_MENU) // Set the steprate for papertest probing - #define PROBE_MANUALLY_STEP 0.05 // (mm) + #define PROBE_MANUALLY_STEP 0.05 // (mm) #endif // Print surface diameter/2 minus unreachable space (avoid collisions with vertical towers). - #define DELTA_PRINTABLE_RADIUS 140.0 // (mm) + #define DELTA_PRINTABLE_RADIUS 75.0 // (mm) Overlord // Center-to-center distance of the holes in the diagonal push rods. - #define DELTA_DIAGONAL_ROD 250.0 // (mm) + #define DELTA_DIAGONAL_ROD 206.0 // (mm) Overlord // Distance between bed and nozzle Z home position - #define DELTA_HEIGHT 250.00 // (mm) Get this value from G33 auto calibrate + #define DELTA_HEIGHT 186.14 // (mm) Overlord - Update this value using G33 auto calibrate - #define DELTA_ENDSTOP_ADJ { 0.0, 0.0, 0.0 } // Get these values from G33 auto calibrate + #define DELTA_ENDSTOP_ADJ { -0.33, 0.0, -0.85 } // Update these values using G33 auto calibrate // Horizontal distance bridged by diagonal push rods when effector is centered. - #define DELTA_RADIUS 124.0 // (mm) Get this value from G33 auto calibrate + #define DELTA_RADIUS 100.63 // (mm) Overlord - Update this value using G33 auto calibrate // Trim adjustments for individual towers // tower angle corrections for X and Y tower / rotate XYZ so Z tower angle = 0 // measured in degrees anticlockwise looking from above the printer - #define DELTA_TOWER_ANGLE_TRIM { 0.0, 0.0, 0.0 } // Get these values from G33 auto calibrate + #define DELTA_TOWER_ANGLE_TRIM { 0.69, 0.0, -0.70 } // Update these values using G33 auto calibrate // Delta radius and diagonal rod adjustments (mm) - //#define DELTA_RADIUS_TRIM_TOWER { 0.0, 0.0, 0.0 } - //#define DELTA_DIAGONAL_ROD_TRIM_TOWER { 0.0, 0.0, 0.0 } + #define DELTA_RADIUS_TRIM_TOWER { 0.0, 0.0, 0.0 } + #define DELTA_DIAGONAL_ROD_TRIM_TOWER { 0.0, 0.0, 0.0 } #endif @@ -746,7 +748,7 @@ // extra connectors. Leave undefined any used for non-endstop and non-probe purposes. //#define USE_XMIN_PLUG //#define USE_YMIN_PLUG -#define USE_ZMIN_PLUG // a Z probe +#define USE_ZMIN_PLUG #define USE_XMAX_PLUG #define USE_YMAX_PLUG #define USE_ZMAX_PLUG @@ -778,13 +780,13 @@ #endif // Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define X_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Y_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Z_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Z_MIN_PROBE_ENDSTOP_INVERTING true // Set to true to invert the logic of the probe. +#define X_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. +#define Y_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. +#define Z_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. +#define X_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. +#define Y_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. +#define Z_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. +#define Z_MIN_PROBE_ENDSTOP_INVERTING true // set to true to invert the logic of the probe. /** * Stepper Drivers @@ -804,15 +806,15 @@ * TMC5130, TMC5130_STANDALONE, TMC5160, TMC5160_STANDALONE * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'L6474', 'POWERSTEP01', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2160', 'TMC2160_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC2209', 'TMC2209_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE', 'TMC5160', 'TMC5160_STANDALONE'] */ -#define X_DRIVER_TYPE A4988 -#define Y_DRIVER_TYPE A4988 -#define Z_DRIVER_TYPE A4988 +#define X_DRIVER_TYPE DRV8825 +#define Y_DRIVER_TYPE DRV8825 +#define Z_DRIVER_TYPE DRV8825 //#define X2_DRIVER_TYPE A4988 //#define Y2_DRIVER_TYPE A4988 //#define Z2_DRIVER_TYPE A4988 //#define Z3_DRIVER_TYPE A4988 //#define Z4_DRIVER_TYPE A4988 -#define E0_DRIVER_TYPE A4988 +#define E0_DRIVER_TYPE DRV8825 //#define E1_DRIVER_TYPE A4988 //#define E2_DRIVER_TYPE A4988 //#define E3_DRIVER_TYPE A4988 @@ -847,7 +849,6 @@ //============================================================================= // @section motion -// delta speeds must be the same on xyz /** * Default Settings * @@ -869,21 +870,21 @@ * X, Y, Z, E0 [, E1[, E2...]] */ // variables to calculate steps -#define XYZ_FULL_STEPS_PER_ROTATION 200 -#define XYZ_MICROSTEPS 16 -#define XYZ_BELT_PITCH 2 -#define XYZ_PULLEY_TEETH 20 - +#define XYZ_FULL_STEPS_PER_ROTATION 100 +#define XYZ_MICROSTEPS 32 +#define XYZ_BELT_PITCH 2.03 +#define XYZ_PULLEY_TEETH 20 // delta speeds must be the same on xyz #define DEFAULT_XYZ_STEPS_PER_UNIT ((XYZ_FULL_STEPS_PER_ROTATION) * (XYZ_MICROSTEPS) / double(XYZ_BELT_PITCH) / double(XYZ_PULLEY_TEETH)) -#define DEFAULT_AXIS_STEPS_PER_UNIT { DEFAULT_XYZ_STEPS_PER_UNIT, DEFAULT_XYZ_STEPS_PER_UNIT, DEFAULT_XYZ_STEPS_PER_UNIT, 760*1.1 } // default steps per unit for Kossel (GT2, 20 tooth) + // Extruder steps per unit from calibration +#define DEFAULT_AXIS_STEPS_PER_UNIT { DEFAULT_XYZ_STEPS_PER_UNIT, DEFAULT_XYZ_STEPS_PER_UNIT, DEFAULT_XYZ_STEPS_PER_UNIT, 67.394} /** * Default Max Feed Rate (mm/s) * Override with M203 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_FEEDRATE { 500, 500, 500, 25 } +#define DEFAULT_MAX_FEEDRATE { 100, 100, 100, 25 } //#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 #if ENABLED(LIMITED_MAX_FR_EDITING) @@ -896,7 +897,7 @@ * Override with M201 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_ACCELERATION { 9000, 9000, 9000, 10000 } +#define DEFAULT_MAX_ACCELERATION { 1000, 1000, 1000, 3000 } //#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 #if ENABLED(LIMITED_MAX_ACCEL_EDITING) @@ -976,7 +977,7 @@ * The probe replaces the Z-MIN endstop and is used for Z homing. * (Automatically enables USE_PROBE_FOR_Z_HOMING.) */ -#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN +#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN // Overlord with Nozzle upgrade with integrated probe // Force the use of the probe for Z-axis homing //#define USE_PROBE_FOR_Z_HOMING @@ -1016,7 +1017,7 @@ * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. * (e.g., an inductive probe or a nozzle-based probe-switch.) */ -//#define FIX_MOUNTED_PROBE +#define FIX_MOUNTED_PROBE /** * Use the nozzle as the probe, as with a conductive @@ -1154,20 +1155,20 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 0, -10, -3.5 } +#define NOZZLE_TO_PROBE_OFFSET { 0, 0, 0.65 } // Most probes should stay away from the edges of the bed, but // with NOZZLE_AS_PROBE this can be negative for a wider probing area. -#define PROBING_MARGIN 10 +#define PROBING_MARGIN 5 // X and Y axis travel speed (mm/min) between probes #define XY_PROBE_FEEDRATE (66*60) // Feedrate (mm/min) for the first approach when double-probing (MULTIPLE_PROBING == 2) -#define Z_PROBE_FEEDRATE_FAST (200*60) +#define Z_PROBE_FEEDRATE_FAST (HOMING_FEEDRATE_Z / 2) // Feedrate (mm/min) for the "accurate" probe of each point -#define Z_PROBE_FEEDRATE_SLOW (Z_PROBE_FEEDRATE_FAST / 2) +#define Z_PROBE_FEEDRATE_SLOW (Z_PROBE_FEEDRATE_FAST / 10) // Slow 2nd probe down a lot, seems to give better results with the Overlord nozzle probe /** * Probe Activation Switch @@ -1205,7 +1206,7 @@ * A total of 2 does fast/slow probes with a weighted average. * A total of 3 or more adds more slow probes, taking the average. */ -//#define MULTIPLE_PROBING 2 +#define MULTIPLE_PROBING 2 //#define EXTRA_PROBING 1 /** @@ -1223,11 +1224,11 @@ * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. */ #define Z_CLEARANCE_DEPLOY_PROBE 15 // Z Clearance for Deploy/Stow -#define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points -#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes -//#define Z_AFTER_PROBING 5 // Z position after probing is done +#define Z_CLEARANCE_BETWEEN_PROBES 15 // Z Clearance between probe points +#define Z_CLEARANCE_MULTI_PROBE 15 // Z Clearance between multiple probes +#define Z_AFTER_PROBING 15 // Z position after probing is done -#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping +#define Z_PROBE_LOW_POINT -4 // Farthest distance below the trigger-point to go before stopping // For M851 give a range for adjusting the Z probe offset #define Z_PROBE_OFFSET_RANGE_MIN -20 @@ -1368,7 +1369,7 @@ #endif #if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS) - //#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD + #define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD #endif /** @@ -1512,7 +1513,7 @@ * Turn on with the command 'M111 S32'. * NOTE: Requires a lot of PROGMEM! */ -//#define DEBUG_LEVELING_FEATURE +#define DEBUG_LEVELING_FEATURE #if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL, PROBE_MANUALLY) // Set a height for the start of manual adjustment @@ -1523,7 +1524,7 @@ // Gradually reduce leveling correction until a set height is reached, // at which point movement will be level to the machine's XY plane. // The height can be set with M420 Z - //#define ENABLE_LEVELING_FADE_HEIGHT + #define ENABLE_LEVELING_FADE_HEIGHT #if ENABLED(ENABLE_LEVELING_FADE_HEIGHT) #define DEFAULT_LEVELING_FADE_HEIGHT 10.0 // (mm) Default fade height. #endif @@ -1553,8 +1554,7 @@ #if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR) // Set the number of grid points per dimension. - // Works best with 5 or more points in each dimension. - #define GRID_MAX_POINTS_X 9 + #define GRID_MAX_POINTS_X 3 #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X // Probe along the Y axis, advancing X after each column @@ -1694,8 +1694,9 @@ #define Z_SAFE_HOMING_Y_POINT Y_CENTER // Y point for Z homing #endif -// Delta only homes to Z -#define HOMING_FEEDRATE_MM_M { (200*60), (200*60), (200*60) } +// Homing speeds (mm/min) +#define HOMING_FEEDRATE_Z (100*60) +#define HOMING_FEEDRATE_MM_M { (50*60), (50*60), HOMING_FEEDRATE_Z } // Validate that endstops are triggered on homing moves #define VALIDATE_HOMING_ENDSTOPS @@ -1772,7 +1773,7 @@ * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) */ -//#define EEPROM_SETTINGS // Persistent storage with M500 and M501 +#define EEPROM_SETTINGS // Persistent storage with M500 and M501 //#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. #define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load @@ -1809,13 +1810,13 @@ #define PREHEAT_1_TEMP_HOTEND 180 #define PREHEAT_1_TEMP_BED 70 #define PREHEAT_1_TEMP_CHAMBER 35 -#define PREHEAT_1_FAN_SPEED 255 // Value from 0 to 255 +#define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 #define PREHEAT_2_LABEL "ABS" #define PREHEAT_2_TEMP_HOTEND 240 -#define PREHEAT_2_TEMP_BED 100 +#define PREHEAT_2_TEMP_BED 110 #define PREHEAT_2_TEMP_CHAMBER 35 -#define PREHEAT_2_FAN_SPEED 255 // Value from 0 to 255 +#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 /** * Nozzle Park @@ -1828,11 +1829,11 @@ * P1 Raise the nozzle always to Z-park height. * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. */ -//#define NOZZLE_PARK_FEATURE +#define NOZZLE_PARK_FEATURE #if ENABLED(NOZZLE_PARK_FEATURE) // Specify a park position as { X, Y, Z_raise } - #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), 0, 20 } + #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 } //#define NOZZLE_PARK_X_ONLY // X move only is required to park //#define NOZZLE_PARK_Y_ONLY // Y move only is required to park #define NOZZLE_PARK_Z_RAISE_MIN 2 // (mm) Always raise Z by at least this distance @@ -1945,7 +1946,7 @@ * * View the current statistics with M78. */ -//#define PRINTCOUNTER +#define PRINTCOUNTER #if ENABLED(PRINTCOUNTER) #define PRINTCOUNTER_SAVE_INTERVAL 60 // (minutes) EEPROM save interval during print #endif @@ -2036,7 +2037,7 @@ * SD Card support is disabled by default. If your controller has an SD slot, * you must uncomment the following option or it won't work. */ -//#define SDSUPPORT +#define SDSUPPORT /** * SD CARD: ENABLE CRC @@ -2463,7 +2464,7 @@ // // Overlord OLED display/controller with i2c buzzer and LEDs // -//#define OVERLORD_OLED +#define OVERLORD_OLED // // FYSETC OLED 2.42" 128×64 Full Graphics Controller with WS2812 RGB @@ -2745,7 +2746,7 @@ //#define BLINKM // Support for PCA9632 PWM LED driver -//#define PCA9632 +#define PCA9632 // Support for PCA9533 PWM LED driver //#define PCA9533 diff --git a/config/examples/delta/Dreammaker/Overlord/Configuration_adv.h b/config/examples/delta/Dreammaker/Overlord/Configuration_adv.h index aa6bbae7e4..74414cb516 100644 --- a/config/examples/delta/Dreammaker/Overlord/Configuration_adv.h +++ b/config/examples/delta/Dreammaker/Overlord/Configuration_adv.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "delta/Dreammaker/Overlord" + /** * Configuration_adv.h * @@ -479,7 +481,7 @@ // When first starting the main fan, run it at full speed for the // given number of milliseconds. This gets the fan spinning reliably // before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) -//#define FAN_KICKSTART_TIME 100 +#define FAN_KICKSTART_TIME 100 // Some coolers may require a non-zero "off" state. //#define FAN_OFF_PWM 1 @@ -926,7 +928,7 @@ * Set DISABLE_INACTIVE_? 'true' to shut down axis steppers after an idle period. * The Deactive Time can be overridden with M18 and M84. Set to 0 for No Timeout. */ -#define DEFAULT_STEPPER_DEACTIVE_TIME 60 +#define DEFAULT_STEPPER_DEACTIVE_TIME 120 #define DISABLE_INACTIVE_X true #define DISABLE_INACTIVE_Y true #define DISABLE_INACTIVE_Z true // Set 'false' if the nozzle could fall onto your printed part! @@ -1147,7 +1149,7 @@ // Change values more rapidly when the encoder is rotated faster #define ENCODER_RATE_MULTIPLIER #if ENABLED(ENCODER_RATE_MULTIPLIER) - #define ENCODER_10X_STEPS_PER_SEC 30 // (steps/s) Encoder rate for 10x speed + #define ENCODER_10X_STEPS_PER_SEC 3 // (steps/s) Encoder rate for 10x speed #define ENCODER_100X_STEPS_PER_SEC 80 // (steps/s) Encoder rate for 100x speed #endif @@ -1177,7 +1179,7 @@ #endif // Include a page of printer information in the LCD Main Menu - //#define LCD_INFO_MENU + #define LCD_INFO_MENU #if ENABLED(LCD_INFO_MENU) //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages #endif @@ -1192,17 +1194,17 @@ * LED Control Menu * Add LED Control to the LCD menu */ - //#define LED_CONTROL_MENU + #define LED_CONTROL_MENU #if ENABLED(LED_CONTROL_MENU) #define LED_COLOR_PRESETS // Enable the Preset Color menu option //#define NEO2_COLOR_PRESETS // Enable a second NeoPixel Preset Color menu option #if ENABLED(LED_COLOR_PRESETS) - #define LED_USER_PRESET_RED 255 // User defined RED value - #define LED_USER_PRESET_GREEN 128 // User defined GREEN value - #define LED_USER_PRESET_BLUE 0 // User defined BLUE value + #define LED_USER_PRESET_RED 35 // User defined RED value + #define LED_USER_PRESET_GREEN 35 // User defined GREEN value + #define LED_USER_PRESET_BLUE 35 // User defined BLUE value #define LED_USER_PRESET_WHITE 255 // User defined WHITE value #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity - //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup + #define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup #endif #if ENABLED(NEO2_COLOR_PRESETS) #define NEO2_USER_PRESET_RED 255 // User defined RED value @@ -1221,7 +1223,7 @@ #if HAS_DISPLAY // The timeout (in ms) to return to the status screen from sub-menus - //#define LCD_TIMEOUT_TO_STATUS 15000 + #define LCD_TIMEOUT_TO_STATUS 15000 #if ENABLED(SHOW_BOOTSCREEN) #define BOOTSCREEN_TIMEOUT 4000 // (ms) Total Duration to display the boot screen(s) @@ -1231,13 +1233,13 @@ #endif // Scroll a longer status message into view - //#define STATUS_MESSAGE_SCROLLING + #define STATUS_MESSAGE_SCROLLING // On the Info Screen, display XY with one decimal place when possible - //#define LCD_DECIMAL_SMALL_XY + #define LCD_DECIMAL_SMALL_XY // Add an 'M73' G-code to set the current percentage - //#define LCD_SET_PROGRESS_MANUALLY + #define LCD_SET_PROGRESS_MANUALLY // Show the E position (filament used) during printing //#define LCD_SHOW_E_TOTAL @@ -1255,7 +1257,7 @@ #endif #if EITHER(HAS_MARLINUI_HD44780, IS_TFTGLCD_PANEL) - //#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing + #define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing #if ENABLED(LCD_PROGRESS_BAR) #define PROGRESS_BAR_BAR_TIME 2000 // (ms) Amount of time to show the bar #define PROGRESS_BAR_MSG_TIME 3000 // (ms) Amount of time to show the status message @@ -1317,13 +1319,13 @@ * an option on the LCD screen to continue the print from the last-known * point in the file. */ - //#define POWER_LOSS_RECOVERY + #define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) //#define BACKUP_POWER_SUPPLY // Backup power / UPS to move the steppers on power loss //#define POWER_LOSS_ZRAISE 2 // (mm) Z axis raise on resume (on power loss with UPS) //#define POWER_LOSS_PIN 44 // Pin to detect power loss. Set to -1 to disable default pin on boards without module. - //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss + #define POWER_LOSS_STATE LOW // State of pin indicating power loss //#define POWER_LOSS_PULLUP // Set pullup / pulldown as appropriate for your sensor //#define POWER_LOSS_PULLDOWN //#define POWER_LOSS_PURGE_LEN 20 // (mm) Length of filament to purge on resume @@ -1386,7 +1388,7 @@ //#define LONG_FILENAME_HOST_SUPPORT // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES + #define SCROLL_LONG_FILENAMES // Leave the heaters on after Stop Print (not recommended!) //#define SD_ABORT_NO_COOLDOWN @@ -1408,7 +1410,7 @@ /** * Auto-report SdCard status with M27 S */ - //#define AUTO_REPORT_SD_STATUS + #define AUTO_REPORT_SD_STATUS /** * Support for USB thumb drives using an Arduino USB Host Shield or @@ -1529,7 +1531,7 @@ // A smaller font may be used on the Info Screen. Costs 2434 bytes of PROGMEM. // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. - //#define USE_SMALL_INFOFONT + #define USE_SMALL_INFOFONT // Swap the CW/CCW indicators in the graphics overlay //#define OVERLAY_GFX_REVERSE @@ -1792,7 +1794,7 @@ * * Warning: Does not respect endstops! */ -//#define BABYSTEPPING +#define BABYSTEPPING #if ENABLED(BABYSTEPPING) //#define INTEGRATED_BABYSTEPPING // EXPERIMENTAL integration of babystepping into the Stepper ISR //#define BABYSTEP_WITHOUT_HOMING @@ -1800,10 +1802,10 @@ //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way //#define BABYSTEP_MILLIMETER_UNITS // Specify BABYSTEP_MULTIPLICATOR_(XY|Z) in mm instead of micro-steps - #define BABYSTEP_MULTIPLICATOR_Z 1 // (steps or mm) Steps or millimeter distance for each Z babystep - #define BABYSTEP_MULTIPLICATOR_XY 1 // (steps or mm) Steps or millimeter distance for each XY babystep + #define BABYSTEP_MULTIPLICATOR_Z 10 // (steps or mm) Steps or millimeter distance for each Z babystep + #define BABYSTEP_MULTIPLICATOR_XY 10 // (steps or mm) Steps or millimeter distance for each Z babystep - //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. + #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. // Note: Extra time may be added to mitigate controller latency. @@ -1813,7 +1815,7 @@ #endif #endif - //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 + #define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping #if ENABLED(BABYSTEP_ZPROBE_OFFSET) @@ -2313,7 +2315,7 @@ * * Enable PARK_HEAD_ON_PAUSE to add the G-code M125 Pause and Park. */ -//#define ADVANCED_PAUSE_FEATURE +#define ADVANCED_PAUSE_FEATURE #if ENABLED(ADVANCED_PAUSE_FEATURE) #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. @@ -2339,7 +2341,7 @@ // Filament can be extruded repeatedly from the Filament Change menu // until extrusion is consistent, and to purge old filament. #define ADVANCED_PAUSE_RESUME_PRIME 0 // (mm) Extra distance to prime nozzle after returning from park. - //#define ADVANCED_PAUSE_FANS_PAUSE // Turn off print-cooling fans while the machine is paused. + #define ADVANCED_PAUSE_FANS_PAUSE // Turn off print-cooling fans while the machine is paused. // Filament Unload does a Retract, Delay, and Purge first: #define FILAMENT_UNLOAD_PURGE_RETRACT 13 // (mm) Unload initial retract length. @@ -2351,10 +2353,10 @@ #define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed. #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change. - //#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. - //#define HOME_BEFORE_FILAMENT_CHANGE // If needed, home before parking for filament change + #define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. + #define HOME_BEFORE_FILAMENT_CHANGE // If needed, home before parking for filament change - //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. + #define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) #endif diff --git a/config/examples/delta/Dreammaker/Overlord_Pro/Configuration.h b/config/examples/delta/Dreammaker/Overlord_Pro/Configuration.h index 464282b015..7737c3b0d8 100644 --- a/config/examples/delta/Dreammaker/Overlord_Pro/Configuration.h +++ b/config/examples/delta/Dreammaker/Overlord_Pro/Configuration.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "delta/Dreammaker/Overlord_Pro" + /** * Configuration.h * @@ -69,7 +71,7 @@ // @section info // Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes. +#define STRING_CONFIG_H_AUTHOR "(Team Overlord/TimMoore)" // Who made the changes. //#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) /** @@ -87,7 +89,7 @@ #define SHOW_BOOTSCREEN // Show the bitmap in Marlin/_Bootscreen.h on startup. -//#define SHOW_CUSTOM_BOOTSCREEN +#define SHOW_CUSTOM_BOOTSCREEN // Show the bitmap in Marlin/_Statusscreen.h on the status screen. //#define CUSTOM_STATUS_SCREEN_IMAGE @@ -134,11 +136,11 @@ // Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_RAMPS_14_EFB + #define MOTHERBOARD BOARD_OVERLORD #endif // Name displayed in the LCD "Ready" message and Info menu -#define CUSTOM_MACHINE_NAME "Deltabot" +#define CUSTOM_MACHINE_NAME "Overlord Pro" // Printer's unique ID, used by some programs to differentiate between machines. // Choose your own or use a service like https://www.uuidgenerator.net/version4 @@ -319,25 +321,25 @@ * Specify whether the power supply is active HIGH or active LOW. */ #define PSU_CONTROL -//#define PSU_NAME "Power Supply" +#define PSU_NAME "OVERLORD" #if ENABLED(PSU_CONTROL) - #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box + #define PSU_ACTIVE_STATE HIGH // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + #define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power //#define PSU_POWERUP_GCODE "M355 S1" // G-code to run after power-on (e.g., case light on) //#define PSU_POWEROFF_GCODE "M355 S0" // G-code to run before power-off (e.g., case light off) - //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin + #define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin #if ENABLED(AUTO_POWER_CONTROL) #define AUTO_POWER_FANS // Turn on PSU if fans need power #define AUTO_POWER_E_FANS #define AUTO_POWER_CONTROLLERFAN - #define AUTO_POWER_CHAMBER_FAN + //#define AUTO_POWER_CHAMBER_FAN #define AUTO_POWER_COOLER_FAN - //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature + #define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature //#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature #define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration @@ -416,15 +418,15 @@ * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. */ -#define TEMP_SENSOR_0 -1 -#define TEMP_SENSOR_1 0 +#define TEMP_SENSOR_0 201 +#define TEMP_SENSOR_1 201 #define TEMP_SENSOR_2 0 #define TEMP_SENSOR_3 0 #define TEMP_SENSOR_4 0 #define TEMP_SENSOR_5 0 #define TEMP_SENSOR_6 0 #define TEMP_SENSOR_7 0 -#define TEMP_SENSOR_BED 0 +#define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 #define TEMP_SENSOR_COOLER 0 @@ -441,14 +443,14 @@ // Use temp sensor 1 as a redundant sensor with sensor 0. If the readings // from the two sensors differ too much the print will be aborted. -//#define TEMP_SENSOR_1_AS_REDUNDANT +#define TEMP_SENSOR_1_AS_REDUNDANT #define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10 #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 #define TEMP_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer #define TEMP_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target -#define TEMP_BED_RESIDENCY_TIME 0 // (seconds) Time to wait for bed to "settle" in M190 +#define TEMP_BED_RESIDENCY_TIME 10 // (seconds) Time to wait for bed to "settle" in M190 #define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer #define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target @@ -472,15 +474,15 @@ // Above this temperature the heater will be switched off. // This can protect components from overheating, but NOT from shorts and failures. // (Use MINTEMP for thermistor short/failure protection.) -#define HEATER_0_MAXTEMP 275 -#define HEATER_1_MAXTEMP 275 +#define HEATER_0_MAXTEMP 245 // lower max temp since updated nozzle is a E3D V6 lite clone +#define HEATER_1_MAXTEMP 245 #define HEATER_2_MAXTEMP 275 #define HEATER_3_MAXTEMP 275 #define HEATER_4_MAXTEMP 275 #define HEATER_5_MAXTEMP 275 #define HEATER_6_MAXTEMP 275 #define HEATER_7_MAXTEMP 275 -#define BED_MAXTEMP 150 +#define BED_MAXTEMP 115 #define CHAMBER_MAXTEMP 60 /** @@ -500,26 +502,27 @@ // Comment the following line to disable PID and enable bang-bang. #define PIDTEMP -#define BANG_MAX 255 // Limits current to nozzle while in bang-bang mode; 255=full current +#define BANG_MAX 160 // Limits current to nozzle while in bang-bang mode; 255=full current #define PID_MAX BANG_MAX // Limits current to nozzle while PID is active (see PID_FUNCTIONAL_RANGE below); 255=full current #define PID_K1 0.95 // Smoothing factor within any PID loop #if ENABLED(PIDTEMP) //#define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) - //#define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) + #define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) // Set/get with gcode: M301 E[extruder number, 0-2] + // Overlord Pro with new nozzle with integrated probe, update using M303 #if ENABLED(PID_PARAMS_PER_HOTEND) // Specify between 1 and HOTENDS values per array. // If fewer than EXTRUDER values are provided, the last element will be repeated. - #define DEFAULT_Kp_LIST { 22.20, 22.20 } - #define DEFAULT_Ki_LIST { 1.08, 1.08 } - #define DEFAULT_Kd_LIST { 114.00, 114.00 } + #define DEFAULT_Kp_LIST { 8.62, 8.62 } + #define DEFAULT_Ki_LIST { 0.55, 0.55 } + #define DEFAULT_Kd_LIST { 33.89, 33.89 } #else - #define DEFAULT_Kp 22.20 - #define DEFAULT_Ki 1.08 - #define DEFAULT_Kd 114.00 + #define DEFAULT_Kp 8.62 + #define DEFAULT_Ki 0.55 + #define DEFAULT_Kd 33.89 #endif #endif // PIDTEMP @@ -540,7 +543,7 @@ * heater. If your configuration is significantly different than this and you don't understand * the issues involved, don't use bed PID until someone else verifies that your hardware works. */ -//#define PIDTEMPBED +#define PIDTEMPBED //#define BED_LIMIT_SWITCHING @@ -551,16 +554,27 @@ * so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED) */ #define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current +#if TEMP_SENSOR_BED != 0 + /* + * For Overlord Pro, the default PSU isn't powerful to run hotend/bed/etc. + * Problem is Hotend heater is 24V 60W, Bed is 24V 160W, Standard Overlord Pro PSU is 24V 220.8W + * Hotend and bed are PWMed to keep their average power less than the max power but they can both be on at the same time. + * If both are on at the same time, then there is no power available for anything else + * and power supply will shutdown if steppers are moving while both hotend and bed are on + * Recommend upgrade PSU + * A Meanwell RSP-500-24 works, a RSP-350-24 should work but has not been tested + */ + #error "Overlord Pro needs larger PSU than stock PSU, comment out this line if you have a larger PSU, otherwise set TEMP_SENSOR_BED to 0" +#endif #if ENABLED(PIDTEMPBED) //#define MIN_BED_POWER 0 //#define PID_BED_DEBUG // Sends debug data to the serial port. - // 120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - // from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) - #define DEFAULT_bedKp 10.00 - #define DEFAULT_bedKi .023 - #define DEFAULT_bedKd 305.4 + // Overlord Pro heater into 5.5mm aluminium bed, update using M303 + #define DEFAULT_bedKp 253.16 + #define DEFAULT_bedKi 24.14 + #define DEFAULT_bedKd 663.66 // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. #endif // PIDTEMPBED @@ -688,15 +702,15 @@ #define DELTA_SEGMENTS_PER_SECOND 200 // After homing move down to a height where XY movement is unconstrained - //#define DELTA_HOME_TO_SAFE_ZONE + #define DELTA_HOME_TO_SAFE_ZONE // Delta calibration menu // uncomment to add three points calibration menu option. // See http://minow.blogspot.com/index.html#4918805519571907051 - //#define DELTA_CALIBRATION_MENU + #define DELTA_CALIBRATION_MENU // uncomment to add G33 Delta Auto-Calibration (Enable EEPROM_SETTINGS to store results) - //#define DELTA_AUTO_CALIBRATION + #define DELTA_AUTO_CALIBRATION // NOTE NB all values for DELTA_* values MUST be floating point, so always have a decimal point in them @@ -707,31 +721,31 @@ #if EITHER(DELTA_AUTO_CALIBRATION, DELTA_CALIBRATION_MENU) // Set the steprate for papertest probing - #define PROBE_MANUALLY_STEP 0.05 // (mm) + #define PROBE_MANUALLY_STEP 0.05 // (mm) #endif // Print surface diameter/2 minus unreachable space (avoid collisions with vertical towers). - #define DELTA_PRINTABLE_RADIUS 140.0 // (mm) + #define DELTA_PRINTABLE_RADIUS 85.0 // (mm) Overlord Pro // Center-to-center distance of the holes in the diagonal push rods. - #define DELTA_DIAGONAL_ROD 250.0 // (mm) + #define DELTA_DIAGONAL_ROD 206.0 // (mm) Overlord Pro // Distance between bed and nozzle Z home position - #define DELTA_HEIGHT 250.00 // (mm) Get this value from G33 auto calibrate + #define DELTA_HEIGHT 286.14 // (mm) Overlord Pro - Update this value using G33 auto calibrate - #define DELTA_ENDSTOP_ADJ { 0.0, 0.0, 0.0 } // Get these values from G33 auto calibrate + #define DELTA_ENDSTOP_ADJ { -0.33, 0.0, -0.85 } // Update these values using G33 auto calibrate // Horizontal distance bridged by diagonal push rods when effector is centered. - #define DELTA_RADIUS 124.0 // (mm) Get this value from G33 auto calibrate + #define DELTA_RADIUS 100.63 // (mm) Overlord Pro - Update this value using G33 auto calibrate // Trim adjustments for individual towers // tower angle corrections for X and Y tower / rotate XYZ so Z tower angle = 0 // measured in degrees anticlockwise looking from above the printer - #define DELTA_TOWER_ANGLE_TRIM { 0.0, 0.0, 0.0 } // Get these values from G33 auto calibrate + #define DELTA_TOWER_ANGLE_TRIM { 0.69, 0.0, -0.70 } // Update these values using G33 auto calibrate // Delta radius and diagonal rod adjustments (mm) - //#define DELTA_RADIUS_TRIM_TOWER { 0.0, 0.0, 0.0 } - //#define DELTA_DIAGONAL_ROD_TRIM_TOWER { 0.0, 0.0, 0.0 } + #define DELTA_RADIUS_TRIM_TOWER { 0.0, 0.0, 0.0 } + #define DELTA_DIAGONAL_ROD_TRIM_TOWER { 0.0, 0.0, 0.0 } #endif @@ -746,7 +760,7 @@ // extra connectors. Leave undefined any used for non-endstop and non-probe purposes. //#define USE_XMIN_PLUG //#define USE_YMIN_PLUG -#define USE_ZMIN_PLUG // a Z probe +#define USE_ZMIN_PLUG #define USE_XMAX_PLUG #define USE_YMAX_PLUG #define USE_ZMAX_PLUG @@ -778,13 +792,13 @@ #endif // Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define X_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Y_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Z_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Z_MIN_PROBE_ENDSTOP_INVERTING true // Set to true to invert the logic of the probe. +#define X_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. +#define Y_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. +#define Z_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. +#define X_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. +#define Y_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. +#define Z_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. +#define Z_MIN_PROBE_ENDSTOP_INVERTING true // set to true to invert the logic of the probe. /** * Stepper Drivers @@ -804,15 +818,15 @@ * TMC5130, TMC5130_STANDALONE, TMC5160, TMC5160_STANDALONE * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'L6474', 'POWERSTEP01', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2160', 'TMC2160_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC2209', 'TMC2209_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE', 'TMC5160', 'TMC5160_STANDALONE'] */ -#define X_DRIVER_TYPE A4988 -#define Y_DRIVER_TYPE A4988 -#define Z_DRIVER_TYPE A4988 +#define X_DRIVER_TYPE DRV8825 +#define Y_DRIVER_TYPE DRV8825 +#define Z_DRIVER_TYPE DRV8825 //#define X2_DRIVER_TYPE A4988 //#define Y2_DRIVER_TYPE A4988 //#define Z2_DRIVER_TYPE A4988 //#define Z3_DRIVER_TYPE A4988 //#define Z4_DRIVER_TYPE A4988 -#define E0_DRIVER_TYPE A4988 +#define E0_DRIVER_TYPE DRV8825 //#define E1_DRIVER_TYPE A4988 //#define E2_DRIVER_TYPE A4988 //#define E3_DRIVER_TYPE A4988 @@ -847,7 +861,6 @@ //============================================================================= // @section motion -// delta speeds must be the same on xyz /** * Default Settings * @@ -869,21 +882,21 @@ * X, Y, Z, E0 [, E1[, E2...]] */ // variables to calculate steps -#define XYZ_FULL_STEPS_PER_ROTATION 200 -#define XYZ_MICROSTEPS 16 -#define XYZ_BELT_PITCH 2 -#define XYZ_PULLEY_TEETH 20 - +#define XYZ_FULL_STEPS_PER_ROTATION 100 +#define XYZ_MICROSTEPS 32 +#define XYZ_BELT_PITCH 2.03 +#define XYZ_PULLEY_TEETH 20 // delta speeds must be the same on xyz #define DEFAULT_XYZ_STEPS_PER_UNIT ((XYZ_FULL_STEPS_PER_ROTATION) * (XYZ_MICROSTEPS) / double(XYZ_BELT_PITCH) / double(XYZ_PULLEY_TEETH)) -#define DEFAULT_AXIS_STEPS_PER_UNIT { DEFAULT_XYZ_STEPS_PER_UNIT, DEFAULT_XYZ_STEPS_PER_UNIT, DEFAULT_XYZ_STEPS_PER_UNIT, 760*1.1 } // default steps per unit for Kossel (GT2, 20 tooth) + // Extruder steps per unit from calibration +#define DEFAULT_AXIS_STEPS_PER_UNIT { DEFAULT_XYZ_STEPS_PER_UNIT, DEFAULT_XYZ_STEPS_PER_UNIT, DEFAULT_XYZ_STEPS_PER_UNIT, 67.394} /** * Default Max Feed Rate (mm/s) * Override with M203 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_FEEDRATE { 500, 500, 500, 25 } +#define DEFAULT_MAX_FEEDRATE { 100, 100, 100, 25 } //#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 #if ENABLED(LIMITED_MAX_FR_EDITING) @@ -896,7 +909,7 @@ * Override with M201 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_ACCELERATION { 9000, 9000, 9000, 10000 } +#define DEFAULT_MAX_ACCELERATION { 1000, 1000, 1000, 3000 } //#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 #if ENABLED(LIMITED_MAX_ACCEL_EDITING) @@ -976,7 +989,7 @@ * The probe replaces the Z-MIN endstop and is used for Z homing. * (Automatically enables USE_PROBE_FOR_Z_HOMING.) */ -#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN +#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN // Overlord Pro with Nozzle upgrade with integrated probe // Force the use of the probe for Z-axis homing //#define USE_PROBE_FOR_Z_HOMING @@ -1016,7 +1029,7 @@ * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. * (e.g., an inductive probe or a nozzle-based probe-switch.) */ -//#define FIX_MOUNTED_PROBE +#define FIX_MOUNTED_PROBE /** * Use the nozzle as the probe, as with a conductive @@ -1154,20 +1167,20 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 0, -10, -3.5 } +#define NOZZLE_TO_PROBE_OFFSET { 0, 0, 0.65 } // Most probes should stay away from the edges of the bed, but // with NOZZLE_AS_PROBE this can be negative for a wider probing area. -#define PROBING_MARGIN 10 +#define PROBING_MARGIN 5 // X and Y axis travel speed (mm/min) between probes #define XY_PROBE_FEEDRATE (66*60) // Feedrate (mm/min) for the first approach when double-probing (MULTIPLE_PROBING == 2) -#define Z_PROBE_FEEDRATE_FAST (200*60) +#define Z_PROBE_FEEDRATE_FAST (100*60)/2 // Feedrate (mm/min) for the "accurate" probe of each point -#define Z_PROBE_FEEDRATE_SLOW (Z_PROBE_FEEDRATE_FAST / 2) +#define Z_PROBE_FEEDRATE_SLOW (Z_PROBE_FEEDRATE_FAST / 10) // Slow 2nd probe down a lot, seems to give better results with the Overlord nozzle probe /** * Probe Activation Switch @@ -1205,7 +1218,7 @@ * A total of 2 does fast/slow probes with a weighted average. * A total of 3 or more adds more slow probes, taking the average. */ -//#define MULTIPLE_PROBING 2 +#define MULTIPLE_PROBING 2 //#define EXTRA_PROBING 1 /** @@ -1223,11 +1236,11 @@ * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. */ #define Z_CLEARANCE_DEPLOY_PROBE 15 // Z Clearance for Deploy/Stow -#define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points -#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes -//#define Z_AFTER_PROBING 5 // Z position after probing is done +#define Z_CLEARANCE_BETWEEN_PROBES 15 // Z Clearance between probe points +#define Z_CLEARANCE_MULTI_PROBE 15 // Z Clearance between multiple probes +#define Z_AFTER_PROBING 15 // Z position after probing is done -#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping +#define Z_PROBE_LOW_POINT -4 // Farthest distance below the trigger-point to go before stopping // For M851 give a range for adjusting the Z probe offset #define Z_PROBE_OFFSET_RANGE_MIN -20 @@ -1289,9 +1302,9 @@ // @section machine // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR false -#define INVERT_Y_DIR false -#define INVERT_Z_DIR false +#define INVERT_X_DIR true +#define INVERT_Y_DIR true +#define INVERT_Z_DIR true // @section extruder @@ -1324,7 +1337,7 @@ // Direction of endstops when homing; 1=MAX, -1=MIN // :[-1,1] -#define X_HOME_DIR 1 // deltas always home to max +#define X_HOME_DIR 1 #define Y_HOME_DIR 1 #define Z_HOME_DIR 1 @@ -1368,7 +1381,7 @@ #endif #if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS) - //#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD + #define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD #endif /** @@ -1512,7 +1525,7 @@ * Turn on with the command 'M111 S32'. * NOTE: Requires a lot of PROGMEM! */ -//#define DEBUG_LEVELING_FEATURE +#define DEBUG_LEVELING_FEATURE #if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL, PROBE_MANUALLY) // Set a height for the start of manual adjustment @@ -1523,7 +1536,7 @@ // Gradually reduce leveling correction until a set height is reached, // at which point movement will be level to the machine's XY plane. // The height can be set with M420 Z - //#define ENABLE_LEVELING_FADE_HEIGHT + #define ENABLE_LEVELING_FADE_HEIGHT #if ENABLED(ENABLE_LEVELING_FADE_HEIGHT) #define DEFAULT_LEVELING_FADE_HEIGHT 10.0 // (mm) Default fade height. #endif @@ -1553,8 +1566,7 @@ #if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR) // Set the number of grid points per dimension. - // Works best with 5 or more points in each dimension. - #define GRID_MAX_POINTS_X 9 + #define GRID_MAX_POINTS_X 3 #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X // Probe along the Y axis, advancing X after each column @@ -1676,7 +1688,7 @@ // For DELTA this is the top-center of the Cartesian print volume. //#define MANUAL_X_HOME_POS 0 //#define MANUAL_Y_HOME_POS 0 -#define MANUAL_Z_HOME_POS DELTA_HEIGHT // Distance between the nozzle to printbed after homing +#define MANUAL_Z_HOME_POS DELTA_HEIGHT // Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area. // @@ -1695,7 +1707,7 @@ #endif // Delta only homes to Z -#define HOMING_FEEDRATE_MM_M { (200*60), (200*60), (200*60) } +#define HOMING_FEEDRATE_MM_M { (100*60), (100*60), (100*60) } // Validate that endstops are triggered on homing moves #define VALIDATE_HOMING_ENDSTOPS @@ -1772,7 +1784,7 @@ * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) */ -//#define EEPROM_SETTINGS // Persistent storage with M500 and M501 +#define EEPROM_SETTINGS // Persistent storage with M500 and M501 //#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. #define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load @@ -1809,13 +1821,13 @@ #define PREHEAT_1_TEMP_HOTEND 180 #define PREHEAT_1_TEMP_BED 70 #define PREHEAT_1_TEMP_CHAMBER 35 -#define PREHEAT_1_FAN_SPEED 255 // Value from 0 to 255 +#define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 #define PREHEAT_2_LABEL "ABS" #define PREHEAT_2_TEMP_HOTEND 240 -#define PREHEAT_2_TEMP_BED 100 +#define PREHEAT_2_TEMP_BED 110 #define PREHEAT_2_TEMP_CHAMBER 35 -#define PREHEAT_2_FAN_SPEED 255 // Value from 0 to 255 +#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 /** * Nozzle Park @@ -1828,11 +1840,11 @@ * P1 Raise the nozzle always to Z-park height. * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. */ -//#define NOZZLE_PARK_FEATURE +#define NOZZLE_PARK_FEATURE #if ENABLED(NOZZLE_PARK_FEATURE) // Specify a park position as { X, Y, Z_raise } - #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), 0, 20 } + #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 } //#define NOZZLE_PARK_X_ONLY // X move only is required to park //#define NOZZLE_PARK_Y_ONLY // Y move only is required to park #define NOZZLE_PARK_Z_RAISE_MIN 2 // (mm) Always raise Z by at least this distance @@ -1945,7 +1957,7 @@ * * View the current statistics with M78. */ -//#define PRINTCOUNTER +#define PRINTCOUNTER #if ENABLED(PRINTCOUNTER) #define PRINTCOUNTER_SAVE_INTERVAL 60 // (minutes) EEPROM save interval during print #endif @@ -2036,7 +2048,7 @@ * SD Card support is disabled by default. If your controller has an SD slot, * you must uncomment the following option or it won't work. */ -//#define SDSUPPORT +#define SDSUPPORT /** * SD CARD: ENABLE CRC @@ -2463,7 +2475,7 @@ // // Overlord OLED display/controller with i2c buzzer and LEDs // -//#define OVERLORD_OLED +#define OVERLORD_OLED // // FYSETC OLED 2.42" 128×64 Full Graphics Controller with WS2812 RGB @@ -2745,7 +2757,7 @@ //#define BLINKM // Support for PCA9632 PWM LED driver -//#define PCA9632 +#define PCA9632 // Support for PCA9533 PWM LED driver //#define PCA9533 diff --git a/config/examples/delta/Dreammaker/Overlord_Pro/Configuration_adv.h b/config/examples/delta/Dreammaker/Overlord_Pro/Configuration_adv.h index aa6bbae7e4..36b9d81aa9 100644 --- a/config/examples/delta/Dreammaker/Overlord_Pro/Configuration_adv.h +++ b/config/examples/delta/Dreammaker/Overlord_Pro/Configuration_adv.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "delta/Dreammaker/Overlord_Pro" + /** * Configuration_adv.h * @@ -479,7 +481,7 @@ // When first starting the main fan, run it at full speed for the // given number of milliseconds. This gets the fan spinning reliably // before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) -//#define FAN_KICKSTART_TIME 100 +#define FAN_KICKSTART_TIME 100 // Some coolers may require a non-zero "off" state. //#define FAN_OFF_PWM 1 @@ -926,7 +928,7 @@ * Set DISABLE_INACTIVE_? 'true' to shut down axis steppers after an idle period. * The Deactive Time can be overridden with M18 and M84. Set to 0 for No Timeout. */ -#define DEFAULT_STEPPER_DEACTIVE_TIME 60 +#define DEFAULT_STEPPER_DEACTIVE_TIME 120 #define DISABLE_INACTIVE_X true #define DISABLE_INACTIVE_Y true #define DISABLE_INACTIVE_Z true // Set 'false' if the nozzle could fall onto your printed part! @@ -1147,7 +1149,7 @@ // Change values more rapidly when the encoder is rotated faster #define ENCODER_RATE_MULTIPLIER #if ENABLED(ENCODER_RATE_MULTIPLIER) - #define ENCODER_10X_STEPS_PER_SEC 30 // (steps/s) Encoder rate for 10x speed + #define ENCODER_10X_STEPS_PER_SEC 3 // (steps/s) Encoder rate for 10x speed #define ENCODER_100X_STEPS_PER_SEC 80 // (steps/s) Encoder rate for 100x speed #endif @@ -1177,7 +1179,7 @@ #endif // Include a page of printer information in the LCD Main Menu - //#define LCD_INFO_MENU + #define LCD_INFO_MENU #if ENABLED(LCD_INFO_MENU) //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages #endif @@ -1192,17 +1194,17 @@ * LED Control Menu * Add LED Control to the LCD menu */ - //#define LED_CONTROL_MENU + #define LED_CONTROL_MENU #if ENABLED(LED_CONTROL_MENU) #define LED_COLOR_PRESETS // Enable the Preset Color menu option //#define NEO2_COLOR_PRESETS // Enable a second NeoPixel Preset Color menu option #if ENABLED(LED_COLOR_PRESETS) - #define LED_USER_PRESET_RED 255 // User defined RED value - #define LED_USER_PRESET_GREEN 128 // User defined GREEN value - #define LED_USER_PRESET_BLUE 0 // User defined BLUE value + #define LED_USER_PRESET_RED 35 // User defined RED value + #define LED_USER_PRESET_GREEN 35 // User defined GREEN value + #define LED_USER_PRESET_BLUE 35 // User defined BLUE value #define LED_USER_PRESET_WHITE 255 // User defined WHITE value #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity - //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup + #define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup #endif #if ENABLED(NEO2_COLOR_PRESETS) #define NEO2_USER_PRESET_RED 255 // User defined RED value @@ -1221,7 +1223,7 @@ #if HAS_DISPLAY // The timeout (in ms) to return to the status screen from sub-menus - //#define LCD_TIMEOUT_TO_STATUS 15000 + #define LCD_TIMEOUT_TO_STATUS 15000 #if ENABLED(SHOW_BOOTSCREEN) #define BOOTSCREEN_TIMEOUT 4000 // (ms) Total Duration to display the boot screen(s) @@ -1231,13 +1233,13 @@ #endif // Scroll a longer status message into view - //#define STATUS_MESSAGE_SCROLLING + #define STATUS_MESSAGE_SCROLLING // On the Info Screen, display XY with one decimal place when possible - //#define LCD_DECIMAL_SMALL_XY + #define LCD_DECIMAL_SMALL_XY // Add an 'M73' G-code to set the current percentage - //#define LCD_SET_PROGRESS_MANUALLY + #define LCD_SET_PROGRESS_MANUALLY // Show the E position (filament used) during printing //#define LCD_SHOW_E_TOTAL @@ -1255,7 +1257,7 @@ #endif #if EITHER(HAS_MARLINUI_HD44780, IS_TFTGLCD_PANEL) - //#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing + #define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing #if ENABLED(LCD_PROGRESS_BAR) #define PROGRESS_BAR_BAR_TIME 2000 // (ms) Amount of time to show the bar #define PROGRESS_BAR_MSG_TIME 3000 // (ms) Amount of time to show the status message @@ -1317,13 +1319,13 @@ * an option on the LCD screen to continue the print from the last-known * point in the file. */ - //#define POWER_LOSS_RECOVERY + #define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) //#define BACKUP_POWER_SUPPLY // Backup power / UPS to move the steppers on power loss //#define POWER_LOSS_ZRAISE 2 // (mm) Z axis raise on resume (on power loss with UPS) //#define POWER_LOSS_PIN 44 // Pin to detect power loss. Set to -1 to disable default pin on boards without module. - //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss + #define POWER_LOSS_STATE LOW // State of pin indicating power loss //#define POWER_LOSS_PULLUP // Set pullup / pulldown as appropriate for your sensor //#define POWER_LOSS_PULLDOWN //#define POWER_LOSS_PURGE_LEN 20 // (mm) Length of filament to purge on resume @@ -1386,7 +1388,7 @@ //#define LONG_FILENAME_HOST_SUPPORT // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES + #define SCROLL_LONG_FILENAMES // Leave the heaters on after Stop Print (not recommended!) //#define SD_ABORT_NO_COOLDOWN @@ -1408,7 +1410,7 @@ /** * Auto-report SdCard status with M27 S */ - //#define AUTO_REPORT_SD_STATUS + #define AUTO_REPORT_SD_STATUS /** * Support for USB thumb drives using an Arduino USB Host Shield or @@ -1529,7 +1531,7 @@ // A smaller font may be used on the Info Screen. Costs 2434 bytes of PROGMEM. // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. - //#define USE_SMALL_INFOFONT + #define USE_SMALL_INFOFONT // Swap the CW/CCW indicators in the graphics overlay //#define OVERLAY_GFX_REVERSE @@ -1792,7 +1794,7 @@ * * Warning: Does not respect endstops! */ -//#define BABYSTEPPING +#define BABYSTEPPING #if ENABLED(BABYSTEPPING) //#define INTEGRATED_BABYSTEPPING // EXPERIMENTAL integration of babystepping into the Stepper ISR //#define BABYSTEP_WITHOUT_HOMING @@ -1800,10 +1802,10 @@ //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way //#define BABYSTEP_MILLIMETER_UNITS // Specify BABYSTEP_MULTIPLICATOR_(XY|Z) in mm instead of micro-steps - #define BABYSTEP_MULTIPLICATOR_Z 1 // (steps or mm) Steps or millimeter distance for each Z babystep - #define BABYSTEP_MULTIPLICATOR_XY 1 // (steps or mm) Steps or millimeter distance for each XY babystep + #define BABYSTEP_MULTIPLICATOR_Z 10 // (steps or mm) Steps or millimeter distance for each Z babystep + #define BABYSTEP_MULTIPLICATOR_XY 10 // (steps or mm) Steps or millimeter distance for each Z babystep - //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. + #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. // Note: Extra time may be added to mitigate controller latency. @@ -1813,7 +1815,7 @@ #endif #endif - //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 + #define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping #if ENABLED(BABYSTEP_ZPROBE_OFFSET) @@ -2313,7 +2315,7 @@ * * Enable PARK_HEAD_ON_PAUSE to add the G-code M125 Pause and Park. */ -//#define ADVANCED_PAUSE_FEATURE +#define ADVANCED_PAUSE_FEATURE #if ENABLED(ADVANCED_PAUSE_FEATURE) #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. @@ -2339,7 +2341,7 @@ // Filament can be extruded repeatedly from the Filament Change menu // until extrusion is consistent, and to purge old filament. #define ADVANCED_PAUSE_RESUME_PRIME 0 // (mm) Extra distance to prime nozzle after returning from park. - //#define ADVANCED_PAUSE_FANS_PAUSE // Turn off print-cooling fans while the machine is paused. + #define ADVANCED_PAUSE_FANS_PAUSE // Turn off print-cooling fans while the machine is paused. // Filament Unload does a Retract, Delay, and Purge first: #define FILAMENT_UNLOAD_PURGE_RETRACT 13 // (mm) Unload initial retract length. @@ -2351,10 +2353,10 @@ #define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed. #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change. - //#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. - //#define HOME_BEFORE_FILAMENT_CHANGE // If needed, home before parking for filament change + #define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. + #define HOME_BEFORE_FILAMENT_CHANGE // If needed, home before parking for filament change - //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. + #define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) #endif diff --git a/config/examples/delta/FLSUN/Q5-nano_v1/Configuration.h b/config/examples/delta/FLSUN/Q5-nano_v1/Configuration.h index 464282b015..5164253d52 100644 --- a/config/examples/delta/FLSUN/Q5-nano_v1/Configuration.h +++ b/config/examples/delta/FLSUN/Q5-nano_v1/Configuration.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "delta/FLSUN/Q5-nano_v1" + /** * Configuration.h * @@ -69,7 +71,7 @@ // @section info // Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes. +#define STRING_CONFIG_H_AUTHOR "(Stefano, FLSUN Q5)" // Who made the changes. //#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) /** @@ -102,14 +104,14 @@ * * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] */ -#define SERIAL_PORT 0 +#define SERIAL_PORT 3 /** * Select a secondary serial port on the board to use for communication with the host. * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] */ -//#define SERIAL_PORT_2 -1 +#define SERIAL_PORT_2 1 /** * Select a third serial port on the board to use for communication with the host. @@ -134,11 +136,11 @@ // Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_RAMPS_14_EFB + #define MOTHERBOARD BOARD_MKS_ROBIN_NANO #endif // Name displayed in the LCD "Ready" message and Info menu -#define CUSTOM_MACHINE_NAME "Deltabot" +#define CUSTOM_MACHINE_NAME "FLSUN Q5" // Printer's unique ID, used by some programs to differentiate between machines. // Choose your own or use a service like https://www.uuidgenerator.net/version4 @@ -318,7 +320,7 @@ * Enable and connect the power supply to the PS_ON_PIN. * Specify whether the power supply is active HIGH or active LOW. */ -#define PSU_CONTROL +//#define PSU_CONTROL //#define PSU_NAME "Power Supply" #if ENABLED(PSU_CONTROL) @@ -416,7 +418,7 @@ * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. */ -#define TEMP_SENSOR_0 -1 +#define TEMP_SENSOR_0 1 #define TEMP_SENSOR_1 0 #define TEMP_SENSOR_2 0 #define TEMP_SENSOR_3 0 @@ -424,7 +426,7 @@ #define TEMP_SENSOR_5 0 #define TEMP_SENSOR_6 0 #define TEMP_SENSOR_7 0 -#define TEMP_SENSOR_BED 0 +#define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 #define TEMP_SENSOR_COOLER 0 @@ -448,7 +450,7 @@ #define TEMP_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer #define TEMP_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target -#define TEMP_BED_RESIDENCY_TIME 0 // (seconds) Time to wait for bed to "settle" in M190 +#define TEMP_BED_RESIDENCY_TIME 10 // (seconds) Time to wait for bed to "settle" in M190 #define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer #define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target @@ -472,7 +474,7 @@ // Above this temperature the heater will be switched off. // This can protect components from overheating, but NOT from shorts and failures. // (Use MINTEMP for thermistor short/failure protection.) -#define HEATER_0_MAXTEMP 275 +#define HEATER_0_MAXTEMP 270 #define HEATER_1_MAXTEMP 275 #define HEATER_2_MAXTEMP 275 #define HEATER_3_MAXTEMP 275 @@ -480,7 +482,7 @@ #define HEATER_5_MAXTEMP 275 #define HEATER_6_MAXTEMP 275 #define HEATER_7_MAXTEMP 275 -#define BED_MAXTEMP 150 +#define BED_MAXTEMP 110 #define CHAMBER_MAXTEMP 60 /** @@ -505,21 +507,22 @@ #define PID_K1 0.95 // Smoothing factor within any PID loop #if ENABLED(PIDTEMP) - //#define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) - //#define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) + #define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) + #define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) // Set/get with gcode: M301 E[extruder number, 0-2] #if ENABLED(PID_PARAMS_PER_HOTEND) // Specify between 1 and HOTENDS values per array. // If fewer than EXTRUDER values are provided, the last element will be repeated. - #define DEFAULT_Kp_LIST { 22.20, 22.20 } - #define DEFAULT_Ki_LIST { 1.08, 1.08 } - #define DEFAULT_Kd_LIST { 114.00, 114.00 } + #define DEFAULT_Kp_LIST { 22.20, 20.0 } + #define DEFAULT_Ki_LIST { 1.08, 1.0 } + #define DEFAULT_Kd_LIST { 114.00, 112.0 } #else - #define DEFAULT_Kp 22.20 - #define DEFAULT_Ki 1.08 - #define DEFAULT_Kd 114.00 + + #define DEFAULT_Kp 10.28 + #define DEFAULT_Ki 0.58 + #define DEFAULT_Kd 45.74 #endif #endif // PIDTEMP @@ -540,7 +543,7 @@ * heater. If your configuration is significantly different than this and you don't understand * the issues involved, don't use bed PID until someone else verifies that your hardware works. */ -//#define PIDTEMPBED +#define PIDTEMPBED //#define BED_LIMIT_SWITCHING @@ -556,11 +559,10 @@ //#define MIN_BED_POWER 0 //#define PID_BED_DEBUG // Sends debug data to the serial port. - // 120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - // from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) - #define DEFAULT_bedKp 10.00 - #define DEFAULT_bedKi .023 - #define DEFAULT_bedKd 305.4 + + #define DEFAULT_bedKp 17.83 + #define DEFAULT_bedKi 1.66 + #define DEFAULT_bedKd 127.67 // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. #endif // PIDTEMPBED @@ -627,14 +629,14 @@ * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** */ #define PREVENT_COLD_EXTRUSION -#define EXTRUDE_MINTEMP 170 +#define EXTRUDE_MINTEMP 175 /** * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. * Note: For Bowden Extruders make this large enough to allow load/unload. */ #define PREVENT_LENGTHY_EXTRUDE -#define EXTRUDE_MAXLENGTH 200 +#define EXTRUDE_MAXLENGTH 600 //=========================================================================== //======================== Thermal Runaway Protection ======================= @@ -655,8 +657,8 @@ #define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders #define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed -#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber -#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling +//#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber +//#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling //=========================================================================== //============================= Mechanical Settings ========================= @@ -693,16 +695,16 @@ // Delta calibration menu // uncomment to add three points calibration menu option. // See http://minow.blogspot.com/index.html#4918805519571907051 - //#define DELTA_CALIBRATION_MENU + #define DELTA_CALIBRATION_MENU // uncomment to add G33 Delta Auto-Calibration (Enable EEPROM_SETTINGS to store results) - //#define DELTA_AUTO_CALIBRATION + #define DELTA_AUTO_CALIBRATION // NOTE NB all values for DELTA_* values MUST be floating point, so always have a decimal point in them #if ENABLED(DELTA_AUTO_CALIBRATION) // set the default number of probe points : n*n (1 -> 7) - #define DELTA_CALIBRATION_DEFAULT_POINTS 4 + #define DELTA_CALIBRATION_DEFAULT_POINTS 7 #endif #if EITHER(DELTA_AUTO_CALIBRATION, DELTA_CALIBRATION_MENU) @@ -711,18 +713,18 @@ #endif // Print surface diameter/2 minus unreachable space (avoid collisions with vertical towers). - #define DELTA_PRINTABLE_RADIUS 140.0 // (mm) + #define DELTA_PRINTABLE_RADIUS 100.0 // (mm) // Center-to-center distance of the holes in the diagonal push rods. - #define DELTA_DIAGONAL_ROD 250.0 // (mm) + #define DELTA_DIAGONAL_ROD 215.0 // (mm) // Distance between bed and nozzle Z home position - #define DELTA_HEIGHT 250.00 // (mm) Get this value from G33 auto calibrate + #define DELTA_HEIGHT 200.00 // (mm) Get this value from G33 auto calibrate #define DELTA_ENDSTOP_ADJ { 0.0, 0.0, 0.0 } // Get these values from G33 auto calibrate // Horizontal distance bridged by diagonal push rods when effector is centered. - #define DELTA_RADIUS 124.0 // (mm) Get this value from G33 auto calibrate + #define DELTA_RADIUS 107.5 // (mm) Get this value from G33 auto calibrate // Trim adjustments for individual towers // tower angle corrections for X and Y tower / rotate XYZ so Z tower angle = 0 @@ -731,7 +733,7 @@ // Delta radius and diagonal rod adjustments (mm) //#define DELTA_RADIUS_TRIM_TOWER { 0.0, 0.0, 0.0 } - //#define DELTA_DIAGONAL_ROD_TRIM_TOWER { 0.0, 0.0, 0.0 } + #define DELTA_DIAGONAL_ROD_TRIM_TOWER { 0.0, 0.0, 0.0 } #endif @@ -746,7 +748,7 @@ // extra connectors. Leave undefined any used for non-endstop and non-probe purposes. //#define USE_XMIN_PLUG //#define USE_YMIN_PLUG -#define USE_ZMIN_PLUG // a Z probe +#define USE_ZMIN_PLUG // Z-probe #define USE_XMAX_PLUG #define USE_YMAX_PLUG #define USE_ZMAX_PLUG @@ -778,13 +780,13 @@ #endif // Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define X_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Y_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Z_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Z_MIN_PROBE_ENDSTOP_INVERTING true // Set to true to invert the logic of the probe. +#define X_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. +#define Y_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. +#define Z_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define X_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. +#define Y_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. +#define Z_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. +#define Z_MIN_PROBE_ENDSTOP_INVERTING true // Set to true to invert the logic of the probe. /** * Stepper Drivers @@ -804,9 +806,9 @@ * TMC5130, TMC5130_STANDALONE, TMC5160, TMC5160_STANDALONE * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'L6474', 'POWERSTEP01', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2160', 'TMC2160_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC2209', 'TMC2209_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE', 'TMC5160', 'TMC5160_STANDALONE'] */ -#define X_DRIVER_TYPE A4988 -#define Y_DRIVER_TYPE A4988 -#define Z_DRIVER_TYPE A4988 +#define X_DRIVER_TYPE TMC2208_STANDALONE +#define Y_DRIVER_TYPE TMC2208_STANDALONE +#define Z_DRIVER_TYPE TMC2208_STANDALONE //#define X2_DRIVER_TYPE A4988 //#define Y2_DRIVER_TYPE A4988 //#define Z2_DRIVER_TYPE A4988 @@ -876,14 +878,14 @@ // delta speeds must be the same on xyz #define DEFAULT_XYZ_STEPS_PER_UNIT ((XYZ_FULL_STEPS_PER_ROTATION) * (XYZ_MICROSTEPS) / double(XYZ_BELT_PITCH) / double(XYZ_PULLEY_TEETH)) -#define DEFAULT_AXIS_STEPS_PER_UNIT { DEFAULT_XYZ_STEPS_PER_UNIT, DEFAULT_XYZ_STEPS_PER_UNIT, DEFAULT_XYZ_STEPS_PER_UNIT, 760*1.1 } // default steps per unit for Kossel (GT2, 20 tooth) +#define DEFAULT_AXIS_STEPS_PER_UNIT { DEFAULT_XYZ_STEPS_PER_UNIT, DEFAULT_XYZ_STEPS_PER_UNIT, DEFAULT_XYZ_STEPS_PER_UNIT, 428 } /** * Default Max Feed Rate (mm/s) * Override with M203 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_FEEDRATE { 500, 500, 500, 25 } +#define DEFAULT_MAX_FEEDRATE { 200, 200, 200, 200 } //#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 #if ENABLED(LIMITED_MAX_FR_EDITING) @@ -896,11 +898,11 @@ * Override with M201 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_ACCELERATION { 9000, 9000, 9000, 10000 } +#define DEFAULT_MAX_ACCELERATION { 1000, 1000, 1000, 1000 } //#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 #if ENABLED(LIMITED_MAX_ACCEL_EDITING) - #define MAX_ACCEL_EDIT_VALUES { 6000, 6000, 200, 20000 } // ...or, set your own edit limits + #define MAX_ACCEL_EDIT_VALUES { 6000, 6000, 6000, 6000 } // ...or, set your own edit limits #endif /** @@ -911,9 +913,9 @@ * M204 R Retract Acceleration * M204 T Travel Acceleration */ -#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves +#define DEFAULT_ACCELERATION 1000 // X, Y, Z and E acceleration for printing moves +#define DEFAULT_RETRACT_ACCELERATION 1000 // E acceleration for retracts +#define DEFAULT_TRAVEL_ACCELERATION 1000 // X, Y, Z acceleration for travel (non printing) moves /** * Default Jerk limits (mm/s) @@ -922,6 +924,7 @@ * "Jerk" specifies the minimum speed change that requires acceleration. * When changing speed and direction, if the difference is less than the * value set here, it may happen instantaneously. + * CLASSIC_JERK is required for DELTA and SCARA. */ #define CLASSIC_JERK #if ENABLED(CLASSIC_JERK) @@ -960,7 +963,7 @@ * * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained */ -//#define S_CURVE_ACCELERATION +#define S_CURVE_ACCELERATION //=========================================================================== //============================= Z Probe Options ============================= @@ -1016,7 +1019,7 @@ * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. * (e.g., an inductive probe or a nozzle-based probe-switch.) */ -//#define FIX_MOUNTED_PROBE +#define FIX_MOUNTED_PROBE /** * Use the nozzle as the probe, as with a conductive @@ -1154,20 +1157,20 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 0, -10, -3.5 } +#define NOZZLE_TO_PROBE_OFFSET { 0, 0, -19.42 } // Most probes should stay away from the edges of the bed, but // with NOZZLE_AS_PROBE this can be negative for a wider probing area. -#define PROBING_MARGIN 10 +#define PROBING_MARGIN 15 // X and Y axis travel speed (mm/min) between probes -#define XY_PROBE_FEEDRATE (66*60) +#define XY_PROBE_FEEDRATE (2000) // Feedrate (mm/min) for the first approach when double-probing (MULTIPLE_PROBING == 2) -#define Z_PROBE_FEEDRATE_FAST (200*60) +#define Z_PROBE_FEEDRATE_FAST (2000) // Feedrate (mm/min) for the "accurate" probe of each point -#define Z_PROBE_FEEDRATE_SLOW (Z_PROBE_FEEDRATE_FAST / 2) +#define Z_PROBE_FEEDRATE_SLOW (Z_PROBE_FEEDRATE_FAST / 4) //override FLSUN Q5, da robin_nano_config.txt: Z_PROBE_SPEED /** * Probe Activation Switch @@ -1205,8 +1208,8 @@ * A total of 2 does fast/slow probes with a weighted average. * A total of 3 or more adds more slow probes, taking the average. */ -//#define MULTIPLE_PROBING 2 -//#define EXTRA_PROBING 1 +#define MULTIPLE_PROBING 3 +#define EXTRA_PROBING 1 /** * Z probes require clearance when deploying, stowing, and moving between @@ -1222,22 +1225,22 @@ * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. */ -#define Z_CLEARANCE_DEPLOY_PROBE 15 // Z Clearance for Deploy/Stow +#define Z_CLEARANCE_DEPLOY_PROBE 30 // Z Clearance for Deploy/Stow #define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points #define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes -//#define Z_AFTER_PROBING 5 // Z position after probing is done +#define Z_AFTER_PROBING 30 // Z position after probing is done #define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping // For M851 give a range for adjusting the Z probe offset -#define Z_PROBE_OFFSET_RANGE_MIN -20 +#define Z_PROBE_OFFSET_RANGE_MIN -40 #define Z_PROBE_OFFSET_RANGE_MAX 20 // Enable the M48 repeatability test to test probe accuracy -//#define Z_MIN_PROBE_REPEATABILITY_TEST +#define Z_MIN_PROBE_REPEATABILITY_TEST // Before deploy/stow pause for user confirmation -//#define PAUSE_BEFORE_DEPLOY_STOW +#define PAUSE_BEFORE_DEPLOY_STOW #if ENABLED(PAUSE_BEFORE_DEPLOY_STOW) //#define PAUSE_PROBE_DEPLOY_WHEN_TRIGGERED // For Manual Deploy Allenkey Probe #endif @@ -1254,15 +1257,15 @@ //#define WAIT_FOR_BED_HEATER // Wait for bed to heat back up between probes (to improve accuracy) //#define WAIT_FOR_HOTEND // Wait for hotend to heat back up between probes (to improve accuracy & prevent cold extrude) #endif -//#define PROBING_FANS_OFF // Turn fans off when probing +#define PROBING_FANS_OFF // Turn fans off when probing //#define PROBING_STEPPERS_OFF // Turn steppers off (unless needed to hold position) when probing -//#define DELAY_BEFORE_PROBING 200 // (ms) To prevent vibrations from triggering piezo sensors +#define DELAY_BEFORE_PROBING 200 // (ms) To prevent vibrations from triggering piezo sensors // Require minimum nozzle and/or bed temperature for probing -//#define PREHEAT_BEFORE_PROBING +#define PREHEAT_BEFORE_PROBING #if ENABLED(PREHEAT_BEFORE_PROBING) - #define PROBING_NOZZLE_TEMP 120 // (°C) Only applies to E0 at this time - #define PROBING_BED_TEMP 50 + //#define PROBING_NOZZLE_TEMP 120 // (°C) Only applies to E0 at this time + #define PROBING_BED_TEMP 60 #endif // For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1 @@ -1296,7 +1299,7 @@ // @section extruder // For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR false +#define INVERT_E0_DIR true #define INVERT_E1_DIR false #define INVERT_E2_DIR false #define INVERT_E3_DIR false @@ -1307,8 +1310,8 @@ // @section homing -//#define NO_MOTION_BEFORE_HOMING // Inhibit movement until all axes have been homed. Also enable HOME_AFTER_DEACTIVATE for extra safety. -//#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated. Also enable NO_MOTION_BEFORE_HOMING for extra safety. +#define NO_MOTION_BEFORE_HOMING // Inhibit movement until all axes have been homed. Also enable HOME_AFTER_DEACTIVATE for extra safety. +#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated. Also enable NO_MOTION_BEFORE_HOMING for extra safety. /** * Set Z_IDLE_HEIGHT if the Z-Axis moves on its own when steppers are disabled. @@ -1340,7 +1343,7 @@ #define Z_MIN_POS 0 #define X_MAX_POS DELTA_PRINTABLE_RADIUS #define Y_MAX_POS DELTA_PRINTABLE_RADIUS -#define Z_MAX_POS MANUAL_Z_HOME_POS +#define Z_MAX_POS DELTA_HEIGHT /** * Software Endstops @@ -1368,7 +1371,7 @@ #endif #if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS) - //#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD + #define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD #endif /** @@ -1454,6 +1457,7 @@ /** * Choose one of the options below to enable G29 Bed Leveling. The parameters * and behavior of G29 will change depending on your selection. + * Only AUTO_BED_LEVELING_BILINEAR and AUTO_BED_LEVELING_UBL support DELTA. * * If using a Probe for Z Homing, enable Z_SAFE_HOMING also! * @@ -1487,7 +1491,7 @@ //#define AUTO_BED_LEVELING_3POINT //#define AUTO_BED_LEVELING_LINEAR //#define AUTO_BED_LEVELING_BILINEAR -//#define AUTO_BED_LEVELING_UBL +#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING /** @@ -1495,7 +1499,7 @@ * these options to restore the prior leveling state or to always enable * leveling immediately after G28. */ -//#define RESTORE_LEVELING_AFTER_G28 +#define RESTORE_LEVELING_AFTER_G28 //#define ENABLE_LEVELING_AFTER_G28 /** @@ -1504,7 +1508,7 @@ //#define PREHEAT_BEFORE_LEVELING #if ENABLED(PREHEAT_BEFORE_LEVELING) #define LEVELING_NOZZLE_TEMP 120 // (°C) Only applies to E0 at this time - #define LEVELING_BED_TEMP 50 + #define LEVELING_BED_TEMP 60 #endif /** @@ -1523,7 +1527,7 @@ // Gradually reduce leveling correction until a set height is reached, // at which point movement will be level to the machine's XY plane. // The height can be set with M420 Z - //#define ENABLE_LEVELING_FADE_HEIGHT + #define ENABLE_LEVELING_FADE_HEIGHT #if ENABLED(ENABLE_LEVELING_FADE_HEIGHT) #define DEFAULT_LEVELING_FADE_HEIGHT 10.0 // (mm) Default fade height. #endif @@ -1537,11 +1541,11 @@ /** * Enable the G26 Mesh Validation Pattern tool. */ - //#define G26_MESH_VALIDATION + #define G26_MESH_VALIDATION #if ENABLED(G26_MESH_VALIDATION) #define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle. #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for G26. - #define MESH_TEST_HOTEND_TEMP 205 // (°C) Default nozzle temperature for G26. + #define MESH_TEST_HOTEND_TEMP 200 // (°C) Default nozzle temperature for G26. #define MESH_TEST_BED_TEMP 60 // (°C) Default bed temperature for G26. #define G26_XY_FEEDRATE 20 // (mm/s) Feedrate for G26 XY moves. #define G26_XY_FEEDRATE_TRAVEL 100 // (mm/s) Feedrate for G26 XY travel moves. @@ -1553,7 +1557,6 @@ #if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR) // Set the number of grid points per dimension. - // Works best with 5 or more points in each dimension. #define GRID_MAX_POINTS_X 9 #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X @@ -1584,7 +1587,7 @@ //========================= Unified Bed Leveling ============================ //=========================================================================== - //#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh + #define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh #define MESH_INSET 1 // Set Mesh bounds as an inset region of the bed #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. @@ -1666,6 +1669,7 @@ * Useful to retract or move the Z probe out of the way. */ //#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" +#define Z_PROBE_END_SCRIPT "G28" // @section homing @@ -1694,8 +1698,8 @@ #define Z_SAFE_HOMING_Y_POINT Y_CENTER // Y point for Z homing #endif -// Delta only homes to Z -#define HOMING_FEEDRATE_MM_M { (200*60), (200*60), (200*60) } +// Homing speeds (mm/min) +#define HOMING_FEEDRATE_MM_M { (30*60), (30*60), (30*60) } // Validate that endstops are triggered on homing moves #define VALIDATE_HOMING_ENDSTOPS @@ -1772,12 +1776,12 @@ * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) */ -//#define EEPROM_SETTINGS // Persistent storage with M500 and M501 +#define EEPROM_SETTINGS // Persistent storage with M500 and M501 //#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. #define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load #if ENABLED(EEPROM_SETTINGS) - //#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. + #define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. #endif // @@ -1806,16 +1810,16 @@ // Preheat Constants - Up to 5 are supported without changes // #define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 180 -#define PREHEAT_1_TEMP_BED 70 -#define PREHEAT_1_TEMP_CHAMBER 35 -#define PREHEAT_1_FAN_SPEED 255 // Value from 0 to 255 +#define PREHEAT_1_TEMP_HOTEND 200 +#define PREHEAT_1_TEMP_BED 60 +#define PREHEAT_1_TEMP_CHAMBER 35 +#define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 -#define PREHEAT_2_LABEL "ABS" -#define PREHEAT_2_TEMP_HOTEND 240 -#define PREHEAT_2_TEMP_BED 100 -#define PREHEAT_2_TEMP_CHAMBER 35 -#define PREHEAT_2_FAN_SPEED 255 // Value from 0 to 255 +#define PREHEAT_2_LABEL "PETG" +#define PREHEAT_2_TEMP_HOTEND 235 +#define PREHEAT_2_TEMP_BED 80 +#define PREHEAT_2_TEMP_CHAMBER 35 +#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 /** * Nozzle Park @@ -1828,11 +1832,11 @@ * P1 Raise the nozzle always to Z-park height. * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. */ -//#define NOZZLE_PARK_FEATURE +#define NOZZLE_PARK_FEATURE #if ENABLED(NOZZLE_PARK_FEATURE) // Specify a park position as { X, Y, Z_raise } - #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), 0, 20 } + #define NOZZLE_PARK_POINT { 0, 0, 20 } //#define NOZZLE_PARK_X_ONLY // X move only is required to park //#define NOZZLE_PARK_Y_ONLY // Y move only is required to park #define NOZZLE_PARK_Z_RAISE_MIN 2 // (mm) Always raise Z by at least this distance @@ -2036,14 +2040,15 @@ * SD Card support is disabled by default. If your controller has an SD slot, * you must uncomment the following option or it won't work. */ -//#define SDSUPPORT +#define SDSUPPORT +#define SDIO_SUPPORT /** * SD CARD: ENABLE CRC * * Use CRC checks and retries on the SD communication. */ -//#define SD_CHECK_AND_RETRY +#define SD_CHECK_AND_RETRY /** * LCD Menu Items @@ -2566,7 +2571,7 @@ // 320x240, 3.2", FSMC Display From MKS // Normally used in MKS Robin Nano V1.2 // -//#define MKS_ROBIN_TFT32 +#define MKS_ROBIN_TFT32 // // 480x320, 3.5", FSMC Display From MKS @@ -2643,7 +2648,7 @@ * For LVGL_UI also copy the 'assets' folder from the build directory to the * root of your SD card, together with the compiled firmware. */ -//#define TFT_CLASSIC_UI +#define TFT_CLASSIC_UI //#define TFT_COLOR_UI //#define TFT_LVGL_UI @@ -2659,7 +2664,7 @@ * TFT_ROTATE_270, TFT_ROTATE_270_MIRROR_X, TFT_ROTATE_270_MIRROR_Y, * TFT_MIRROR_X, TFT_MIRROR_Y, TFT_NO_ROTATION */ -//#define TFT_ROTATION TFT_NO_ROTATION +#define TFT_ROTATION TFT_ROTATE_180 //============================================================================= //============================ Other Controllers ============================ @@ -2673,7 +2678,7 @@ // // Touch Screen Settings // -//#define TOUCH_SCREEN +#define TOUCH_SCREEN #if ENABLED(TOUCH_SCREEN) #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus diff --git a/config/examples/delta/FLSUN/Q5-nano_v1/Configuration_adv.h b/config/examples/delta/FLSUN/Q5-nano_v1/Configuration_adv.h index aa6bbae7e4..c352dd1e09 100644 --- a/config/examples/delta/FLSUN/Q5-nano_v1/Configuration_adv.h +++ b/config/examples/delta/FLSUN/Q5-nano_v1/Configuration_adv.h @@ -1,6 +1,6 @@ /** * Marlin 3D Printer Firmware - * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * Copyright (c) 2021 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * * Based on Sprinter and grbl. * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "delta/FLSUN/Q5-nano_v1" + /** * Configuration_adv.h * @@ -437,7 +439,7 @@ * Hotend Idle Timeout * Prevent filament in the nozzle from charring and causing a critical jam. */ -//#define HOTEND_IDLE_TIMEOUT +#define HOTEND_IDLE_TIMEOUT #if ENABLED(HOTEND_IDLE_TIMEOUT) #define HOTEND_IDLE_TIMEOUT_SEC (5*60) // (seconds) Time without extruder movement to trigger protection #define HOTEND_IDLE_MIN_TRIGGER 180 // (°C) Minimum temperature to enable hotend protection @@ -479,7 +481,7 @@ // When first starting the main fan, run it at full speed for the // given number of milliseconds. This gets the fan spinning reliably // before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) -//#define FAN_KICKSTART_TIME 100 +#define FAN_KICKSTART_TIME 100 // Some coolers may require a non-zero "off" state. //#define FAN_OFF_PWM 1 @@ -550,7 +552,7 @@ #define E7_AUTO_FAN_PIN -1 #define CHAMBER_AUTO_FAN_PIN -1 #define COOLER_AUTO_FAN_PIN -1 -#define COOLER_FAN_PIN -1 +//#define COOLER_FAN_PIN -1 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed @@ -738,9 +740,9 @@ #define HOMING_BUMP_MM { 5, 5, 5 } // (mm) Backoff from endstops after first bump // For delta all values must be the same -#define HOMING_BUMP_DIVISOR { 10, 10, 10 } // Re-Bump Speed Divisor (Divides the Homing Feedrate) +#define HOMING_BUMP_DIVISOR { 5, 5, 5 } // Re-Bump Speed Divisor (Divides the Homing Feedrate) -//#define HOMING_BACKOFF_POST_MM { 2, 2, 2 } // (mm) Backoff from endstops after homing +#define HOMING_BACKOFF_POST_MM { 2, 2, 2 } // (mm) Backoff from endstops after homing //#define QUICK_HOME // If G28 contains XY do a diagonal move first //#define HOME_Y_BEFORE_X // If G28 contains XY home Y before X @@ -868,7 +870,7 @@ // On a 300mm bed a 5% grade would give a misalignment of ~1.5cm #define G34_MAX_GRADE 5 // (%) Maximum incline that G34 will handle - #define Z_STEPPER_ALIGN_ITERATIONS 3 // Number of iterations to apply during alignment + #define Z_STEPPER_ALIGN_ITERATIONS 5 // Number of iterations to apply during alignment #define Z_STEPPER_ALIGN_ACC 0.02 // Stop iterating early if the accuracy is better than this #define RESTORE_LEVELING_AFTER_G34 // Restore leveling after G34 is done? // After G34, re-home Z (G28 Z) or just calculate it from the last probe heights? @@ -926,7 +928,7 @@ * Set DISABLE_INACTIVE_? 'true' to shut down axis steppers after an idle period. * The Deactive Time can be overridden with M18 and M84. Set to 0 for No Timeout. */ -#define DEFAULT_STEPPER_DEACTIVE_TIME 60 +#define DEFAULT_STEPPER_DEACTIVE_TIME 120 #define DISABLE_INACTIVE_X true #define DISABLE_INACTIVE_Y true #define DISABLE_INACTIVE_Z true // Set 'false' if the nozzle could fall onto your printed part! @@ -941,7 +943,7 @@ // Slow down the machine if the lookahead buffer is (by default) half full. // Increase the slowdown divisor for larger buffer sizes. -//#define SLOWDOWN +#define SLOWDOWN #if ENABLED(SLOWDOWN) #define SLOWDOWN_DIVISOR 2 #endif @@ -1135,7 +1137,7 @@ // @section lcd #if EITHER(IS_ULTIPANEL, EXTENSIBLE_UI) - #define MANUAL_FEEDRATE_XYZ 50*60 + #define MANUAL_FEEDRATE_XYZ 35*60 #define MANUAL_FEEDRATE { MANUAL_FEEDRATE_XYZ, MANUAL_FEEDRATE_XYZ, MANUAL_FEEDRATE_XYZ, 60 } // (mm/min) Feedrates for manual moves along X, Y, Z, E from panel #define FINE_MANUAL_MOVE 0.025 // (mm) Smallest manual move (< 0.1mm) applying to Z on most machines #if IS_ULTIPANEL @@ -1162,14 +1164,14 @@ // Add Probe Z Offset calibration to the Z Probe Offsets menu #if HAS_BED_PROBE - //#define PROBE_OFFSET_WIZARD + #define PROBE_OFFSET_WIZARD #if ENABLED(PROBE_OFFSET_WIZARD) // // Enable to init the Probe Z-Offset when starting the Wizard. // Use a height slightly above the estimated nozzle-to-probe Z offset. // For example, with an offset of -5, consider a starting height of -4. // - //#define PROBE_OFFSET_WIZARD_START_Z -4.0 + #define PROBE_OFFSET_WIZARD_START_Z -20.0 // Estimated nozzle-to-probe Z offset, plus a little extra // Set a convenient position to do the calibration (probing point and nozzle/bed-distance) //#define PROBE_OFFSET_WIZARD_XY_POS { X_CENTER, Y_CENTER } @@ -1177,7 +1179,7 @@ #endif // Include a page of printer information in the LCD Main Menu - //#define LCD_INFO_MENU + #define LCD_INFO_MENU #if ENABLED(LCD_INFO_MENU) //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages #endif @@ -1215,13 +1217,13 @@ #endif // Insert a menu for preheating at the top level to allow for quick access - //#define PREHEAT_SHORTCUT_MENU_ITEM + #define PREHEAT_SHORTCUT_MENU_ITEM #endif // HAS_LCD_MENU #if HAS_DISPLAY // The timeout (in ms) to return to the status screen from sub-menus - //#define LCD_TIMEOUT_TO_STATUS 15000 + //#define LCD_TIMEOUT_TO_STATUS 60000 #if ENABLED(SHOW_BOOTSCREEN) #define BOOTSCREEN_TIMEOUT 4000 // (ms) Total Duration to display the boot screen(s) @@ -1231,23 +1233,23 @@ #endif // Scroll a longer status message into view - //#define STATUS_MESSAGE_SCROLLING + #define STATUS_MESSAGE_SCROLLING // On the Info Screen, display XY with one decimal place when possible - //#define LCD_DECIMAL_SMALL_XY + #define LCD_DECIMAL_SMALL_XY // Add an 'M73' G-code to set the current percentage - //#define LCD_SET_PROGRESS_MANUALLY + #define LCD_SET_PROGRESS_MANUALLY // Show the E position (filament used) during printing //#define LCD_SHOW_E_TOTAL #endif #if EITHER(SDSUPPORT, LCD_SET_PROGRESS_MANUALLY) && ANY(HAS_MARLINUI_U8GLIB, HAS_MARLINUI_HD44780, IS_TFTGLCD_PANEL, EXTENSIBLE_UI) - //#define SHOW_REMAINING_TIME // Display estimated time to completion + #define SHOW_REMAINING_TIME // Display estimated time to completion #if ENABLED(SHOW_REMAINING_TIME) //#define USE_M73_REMAINING_TIME // Use remaining time from M73 command instead of estimation - //#define ROTATE_PROGRESS_DISPLAY // Display (P)rogress, (E)lapsed, and (R)emaining time + #define ROTATE_PROGRESS_DISPLAY // Display (P)rogress, (E)lapsed, and (R)emaining time #endif #if EITHER(HAS_MARLINUI_U8GLIB, EXTENSIBLE_UI) @@ -1303,7 +1305,7 @@ //#define BROWSE_MEDIA_ON_INSERT // Open the file browser when media is inserted - #define EVENT_GCODE_SD_ABORT "G28" // G-code to run on SD Abort Print (e.g., "G28XY" or "G27") + #define EVENT_GCODE_SD_ABORT "G28XY" // G-code to run on SD Abort Print (e.g., "G28XY" or "G27") #if ENABLED(PRINTER_EVENT_LEDS) #define PE_LEDS_COMPLETED_TIME (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination @@ -1383,10 +1385,10 @@ //#define UTF_FILENAME_SUPPORT // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT + #define LONG_FILENAME_HOST_SUPPORT // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES + #define SCROLL_LONG_FILENAMES // Leave the heaters on after Stop Print (not recommended!) //#define SD_ABORT_NO_COOLDOWN @@ -1792,18 +1794,18 @@ * * Warning: Does not respect endstops! */ -//#define BABYSTEPPING +#define BABYSTEPPING #if ENABLED(BABYSTEPPING) //#define INTEGRATED_BABYSTEPPING // EXPERIMENTAL integration of babystepping into the Stepper ISR //#define BABYSTEP_WITHOUT_HOMING - //#define BABYSTEP_ALWAYS_AVAILABLE // Allow babystepping at all times (not just during movement). + #define BABYSTEP_ALWAYS_AVAILABLE // Allow babystepping at all times (not just during movement). //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way //#define BABYSTEP_MILLIMETER_UNITS // Specify BABYSTEP_MULTIPLICATOR_(XY|Z) in mm instead of micro-steps #define BABYSTEP_MULTIPLICATOR_Z 1 // (steps or mm) Steps or millimeter distance for each Z babystep #define BABYSTEP_MULTIPLICATOR_XY 1 // (steps or mm) Steps or millimeter distance for each XY babystep - //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. + #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. // Note: Extra time may be added to mitigate controller latency. @@ -1839,12 +1841,12 @@ * * See https://marlinfw.org/docs/features/lin_advance.html for full instructions. */ -//#define LIN_ADVANCE +#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) //#define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants - #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed + #define LIN_ADVANCE_K 0.0 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // If enabled, this will generate debug information output over USB. - //#define EXPERIMENTAL_SCURVE // Enable this option to permit S-Curve Acceleration + #define EXPERIMENTAL_SCURVE // Enable this option to permit S-Curve Acceleration #endif // @section leveling @@ -2082,18 +2084,18 @@ // The number of linear moves that can be in the planner at once. // The value of BLOCK_BUFFER_SIZE must be a power of 2 (e.g. 8, 16, 32) #if BOTH(SDSUPPORT, DIRECT_STEPPING) - #define BLOCK_BUFFER_SIZE 8 + #define BLOCK_BUFFER_SIZE 64 #elif ENABLED(SDSUPPORT) - #define BLOCK_BUFFER_SIZE 16 + #define BLOCK_BUFFER_SIZE 64 #else - #define BLOCK_BUFFER_SIZE 16 + #define BLOCK_BUFFER_SIZE 64 #endif // @section serial // The ASCII buffer for serial input #define MAX_CMD_SIZE 96 -#define BUFSIZE 4 +#define BUFSIZE 32 // da 4 che era // Transmission to Host Buffer Size // To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0. @@ -2102,7 +2104,7 @@ // For debug-echo: 128 bytes for the optimal speed. // Other output doesn't need to be that speedy. // :[0, 2, 4, 8, 16, 32, 64, 128, 256] -#define TX_BUFFER_SIZE 0 +#define TX_BUFFER_SIZE 128 // Host Receive Buffer Size // Without XON/XOFF flow control (see SERIAL_XON_XOFF below) 32 bytes should be enough. @@ -2313,28 +2315,28 @@ * * Enable PARK_HEAD_ON_PAUSE to add the G-code M125 Pause and Park. */ -//#define ADVANCED_PAUSE_FEATURE +#define ADVANCED_PAUSE_FEATURE #if ENABLED(ADVANCED_PAUSE_FEATURE) - #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. + #define PAUSE_PARK_RETRACT_FEEDRATE 35 // (mm/s) Initial retract feedrate. #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. // This short retract is done immediately, before parking the nozzle. - #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast. + #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 28 // (mm/s) Unload filament feedrate. This can be pretty fast. #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload. + #define FILAMENT_CHANGE_UNLOAD_LENGTH 600 // (mm) The length of filament for a complete unload. // For Bowden, the full length of the tube and nozzle. // For direct drive, the full length of the nozzle. // Set to 0 for manual unloading. #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE 6 // (mm/s) Slow move when starting load. #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 0 // (mm) Slow length, to allow time to insert material. // 0 to disable start loading and skip to fast load only - #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast. + #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 20 // (mm/s) Load filament feedrate. This can be pretty fast. #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle. + #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 600 // (mm) Load length of filament, from extruder gear to nozzle. // For Bowden, the full length of the tube and nozzle. // For direct drive, the full length of the nozzle. - //#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted. + #define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted. #define ADVANCED_PAUSE_PURGE_FEEDRATE 3 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate. - #define ADVANCED_PAUSE_PURGE_LENGTH 50 // (mm) Length to extrude after loading. + #define ADVANCED_PAUSE_PURGE_LENGTH 150 // (mm) Length to extrude after loading. // Set to 0 for manual extrusion. // Filament can be extruded repeatedly from the Filament Change menu // until extrusion is consistent, and to purge old filament. @@ -2351,10 +2353,10 @@ #define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed. #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change. - //#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. - //#define HOME_BEFORE_FILAMENT_CHANGE // If needed, home before parking for filament change + #define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. + #define HOME_BEFORE_FILAMENT_CHANGE // If needed, home before parking for filament change - //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. + #define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) #endif @@ -2567,7 +2569,7 @@ #endif #if AXIS_IS_TMC(E0) - #define E0_CURRENT 800 + #define E0_CURRENT 1000 #define E0_MICROSTEPS 16 #define E0_RSENSE 0.11 #define E0_CHAIN_POS -1 @@ -2704,7 +2706,7 @@ */ #define STEALTHCHOP_XY #define STEALTHCHOP_Z - #define STEALTHCHOP_E + //#define STEALTHCHOP_E /** * Optimize spreadCycle chopper parameters by using predefined parameter sets @@ -2721,7 +2723,7 @@ * Define your own with: * { , , hysteresis_start[1..8] } */ - #define CHOPPER_TIMING CHOPPER_DEFAULT_12V // All axes (override below) + #define CHOPPER_TIMING CHOPPER_DEFAULT_24V // All axes (override below) //#define CHOPPER_TIMING_X CHOPPER_TIMING // For X Axes (override below) //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X //#define CHOPPER_TIMING_Y CHOPPER_TIMING // For Y Axes (override below) @@ -2841,7 +2843,7 @@ * Beta feature! * Create a 50/50 square wave step pulse optimal for stepper drivers. */ - //#define SQUARE_WAVE_STEPPING + #define SQUARE_WAVE_STEPPING /** * Enable M122 debugging command for TMC stepper drivers. diff --git a/config/examples/delta/FLSUN/Q5-nano_v2/Configuration.h b/config/examples/delta/FLSUN/Q5-nano_v2/Configuration.h index 464282b015..c34993444c 100644 --- a/config/examples/delta/FLSUN/Q5-nano_v2/Configuration.h +++ b/config/examples/delta/FLSUN/Q5-nano_v2/Configuration.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "delta/FLSUN/Q5-nano_v2" + /** * Configuration.h * @@ -69,7 +71,7 @@ // @section info // Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes. +#define STRING_CONFIG_H_AUTHOR "(mgcrea, Q5 config)" // Who made the changes. //#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) /** @@ -102,14 +104,14 @@ * * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] */ -#define SERIAL_PORT 0 +#define SERIAL_PORT 3 /** * Select a secondary serial port on the board to use for communication with the host. * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] */ -//#define SERIAL_PORT_2 -1 +#define SERIAL_PORT_2 1 /** * Select a third serial port on the board to use for communication with the host. @@ -134,11 +136,11 @@ // Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_RAMPS_14_EFB + #define MOTHERBOARD BOARD_MKS_ROBIN_NANO_V2 #endif // Name displayed in the LCD "Ready" message and Info menu -#define CUSTOM_MACHINE_NAME "Deltabot" +//#define CUSTOM_MACHINE_NAME "3D Printer" // Printer's unique ID, used by some programs to differentiate between machines. // Choose your own or use a service like https://www.uuidgenerator.net/version4 @@ -318,7 +320,7 @@ * Enable and connect the power supply to the PS_ON_PIN. * Specify whether the power supply is active HIGH or active LOW. */ -#define PSU_CONTROL +//#define PSU_CONTROL //#define PSU_NAME "Power Supply" #if ENABLED(PSU_CONTROL) @@ -416,7 +418,7 @@ * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. */ -#define TEMP_SENSOR_0 -1 +#define TEMP_SENSOR_0 1 #define TEMP_SENSOR_1 0 #define TEMP_SENSOR_2 0 #define TEMP_SENSOR_3 0 @@ -424,7 +426,7 @@ #define TEMP_SENSOR_5 0 #define TEMP_SENSOR_6 0 #define TEMP_SENSOR_7 0 -#define TEMP_SENSOR_BED 0 +#define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 #define TEMP_SENSOR_COOLER 0 @@ -448,7 +450,7 @@ #define TEMP_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer #define TEMP_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target -#define TEMP_BED_RESIDENCY_TIME 0 // (seconds) Time to wait for bed to "settle" in M190 +#define TEMP_BED_RESIDENCY_TIME 10 // (seconds) Time to wait for bed to "settle" in M190 #define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer #define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target @@ -480,7 +482,7 @@ #define HEATER_5_MAXTEMP 275 #define HEATER_6_MAXTEMP 275 #define HEATER_7_MAXTEMP 275 -#define BED_MAXTEMP 150 +#define BED_MAXTEMP 110 #define CHAMBER_MAXTEMP 60 /** @@ -513,9 +515,9 @@ #if ENABLED(PID_PARAMS_PER_HOTEND) // Specify between 1 and HOTENDS values per array. // If fewer than EXTRUDER values are provided, the last element will be repeated. - #define DEFAULT_Kp_LIST { 22.20, 22.20 } - #define DEFAULT_Ki_LIST { 1.08, 1.08 } - #define DEFAULT_Kd_LIST { 114.00, 114.00 } + #define DEFAULT_Kp_LIST { 22.20, 20.0 } + #define DEFAULT_Ki_LIST { 1.08, 1.0 } + #define DEFAULT_Kd_LIST { 114.00, 112.0 } #else #define DEFAULT_Kp 22.20 #define DEFAULT_Ki 1.08 @@ -540,7 +542,7 @@ * heater. If your configuration is significantly different than this and you don't understand * the issues involved, don't use bed PID until someone else verifies that your hardware works. */ -//#define PIDTEMPBED +#define PIDTEMPBED //#define BED_LIMIT_SWITCHING @@ -556,11 +558,10 @@ //#define MIN_BED_POWER 0 //#define PID_BED_DEBUG // Sends debug data to the serial port. - // 120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - // from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) - #define DEFAULT_bedKp 10.00 - #define DEFAULT_bedKi .023 - #define DEFAULT_bedKd 305.4 + // flsun Q5 via M303 E-1 C8 S60 + #define DEFAULT_bedKp 58.98 + #define DEFAULT_bedKi 10.82 + #define DEFAULT_bedKd 214.36 // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. #endif // PIDTEMPBED @@ -696,13 +697,13 @@ //#define DELTA_CALIBRATION_MENU // uncomment to add G33 Delta Auto-Calibration (Enable EEPROM_SETTINGS to store results) - //#define DELTA_AUTO_CALIBRATION + #define DELTA_AUTO_CALIBRATION // NOTE NB all values for DELTA_* values MUST be floating point, so always have a decimal point in them #if ENABLED(DELTA_AUTO_CALIBRATION) // set the default number of probe points : n*n (1 -> 7) - #define DELTA_CALIBRATION_DEFAULT_POINTS 4 + #define DELTA_CALIBRATION_DEFAULT_POINTS 7 #endif #if EITHER(DELTA_AUTO_CALIBRATION, DELTA_CALIBRATION_MENU) @@ -711,18 +712,18 @@ #endif // Print surface diameter/2 minus unreachable space (avoid collisions with vertical towers). - #define DELTA_PRINTABLE_RADIUS 140.0 // (mm) + #define DELTA_PRINTABLE_RADIUS 100.0 // (mm) // Center-to-center distance of the holes in the diagonal push rods. - #define DELTA_DIAGONAL_ROD 250.0 // (mm) + #define DELTA_DIAGONAL_ROD 215.0 // (mm) // Distance between bed and nozzle Z home position - #define DELTA_HEIGHT 250.00 // (mm) Get this value from G33 auto calibrate + #define DELTA_HEIGHT 200.00 // (mm) Get this value from G33 auto calibrate #define DELTA_ENDSTOP_ADJ { 0.0, 0.0, 0.0 } // Get these values from G33 auto calibrate // Horizontal distance bridged by diagonal push rods when effector is centered. - #define DELTA_RADIUS 124.0 // (mm) Get this value from G33 auto calibrate + #define DELTA_RADIUS 107.5 // (mm) Get this value from G33 auto calibrate // Trim adjustments for individual towers // tower angle corrections for X and Y tower / rotate XYZ so Z tower angle = 0 @@ -778,13 +779,13 @@ #endif // Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define X_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Y_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Z_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Z_MIN_PROBE_ENDSTOP_INVERTING true // Set to true to invert the logic of the probe. +#define X_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. +#define Y_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. +#define Z_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define X_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. +#define Y_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. +#define Z_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. +#define Z_MIN_PROBE_ENDSTOP_INVERTING true // Set to true to invert the logic of the probe. /** * Stepper Drivers @@ -804,15 +805,15 @@ * TMC5130, TMC5130_STANDALONE, TMC5160, TMC5160_STANDALONE * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'L6474', 'POWERSTEP01', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2160', 'TMC2160_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC2209', 'TMC2209_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE', 'TMC5160', 'TMC5160_STANDALONE'] */ -#define X_DRIVER_TYPE A4988 -#define Y_DRIVER_TYPE A4988 -#define Z_DRIVER_TYPE A4988 +#define X_DRIVER_TYPE TMC2209 +#define Y_DRIVER_TYPE TMC2209 +#define Z_DRIVER_TYPE TMC2209 //#define X2_DRIVER_TYPE A4988 //#define Y2_DRIVER_TYPE A4988 //#define Z2_DRIVER_TYPE A4988 //#define Z3_DRIVER_TYPE A4988 //#define Z4_DRIVER_TYPE A4988 -#define E0_DRIVER_TYPE A4988 +#define E0_DRIVER_TYPE TMC2209 //#define E1_DRIVER_TYPE A4988 //#define E2_DRIVER_TYPE A4988 //#define E3_DRIVER_TYPE A4988 @@ -876,14 +877,14 @@ // delta speeds must be the same on xyz #define DEFAULT_XYZ_STEPS_PER_UNIT ((XYZ_FULL_STEPS_PER_ROTATION) * (XYZ_MICROSTEPS) / double(XYZ_BELT_PITCH) / double(XYZ_PULLEY_TEETH)) -#define DEFAULT_AXIS_STEPS_PER_UNIT { DEFAULT_XYZ_STEPS_PER_UNIT, DEFAULT_XYZ_STEPS_PER_UNIT, DEFAULT_XYZ_STEPS_PER_UNIT, 760*1.1 } // default steps per unit for Kossel (GT2, 20 tooth) +#define DEFAULT_AXIS_STEPS_PER_UNIT { DEFAULT_XYZ_STEPS_PER_UNIT, DEFAULT_XYZ_STEPS_PER_UNIT, DEFAULT_XYZ_STEPS_PER_UNIT, 400 } /** * Default Max Feed Rate (mm/s) * Override with M203 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_FEEDRATE { 500, 500, 500, 25 } +#define DEFAULT_MAX_FEEDRATE { 200, 200, 200, 200 } //#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 #if ENABLED(LIMITED_MAX_FR_EDITING) @@ -896,11 +897,11 @@ * Override with M201 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_ACCELERATION { 9000, 9000, 9000, 10000 } +#define DEFAULT_MAX_ACCELERATION { 1000, 1000, 1000, 1000 } //#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 #if ENABLED(LIMITED_MAX_ACCEL_EDITING) - #define MAX_ACCEL_EDIT_VALUES { 6000, 6000, 200, 20000 } // ...or, set your own edit limits + #define MAX_ACCEL_EDIT_VALUES { 6000, 6000, 6000, 6000 } // ...or, set your own edit limits #endif /** @@ -911,9 +912,9 @@ * M204 R Retract Acceleration * M204 T Travel Acceleration */ -#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves +#define DEFAULT_ACCELERATION 1000 // X, Y, Z and E acceleration for printing moves +#define DEFAULT_RETRACT_ACCELERATION 1000 // E acceleration for retracts +#define DEFAULT_TRAVEL_ACCELERATION 1000 // X, Y, Z acceleration for travel (non printing) moves /** * Default Jerk limits (mm/s) @@ -960,7 +961,7 @@ * * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained */ -//#define S_CURVE_ACCELERATION +#define S_CURVE_ACCELERATION //=========================================================================== //============================= Z Probe Options ============================= @@ -1016,7 +1017,7 @@ * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. * (e.g., an inductive probe or a nozzle-based probe-switch.) */ -//#define FIX_MOUNTED_PROBE +#define FIX_MOUNTED_PROBE /** * Use the nozzle as the probe, as with a conductive @@ -1154,20 +1155,20 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 0, -10, -3.5 } +#define NOZZLE_TO_PROBE_OFFSET { 0, 0, -18.0 } // Most probes should stay away from the edges of the bed, but // with NOZZLE_AS_PROBE this can be negative for a wider probing area. -#define PROBING_MARGIN 10 +#define PROBING_MARGIN 20 // X and Y axis travel speed (mm/min) between probes -#define XY_PROBE_FEEDRATE (66*60) +#define XY_PROBE_FEEDRATE (100 * 60) // Feedrate (mm/min) for the first approach when double-probing (MULTIPLE_PROBING == 2) -#define Z_PROBE_FEEDRATE_FAST (200*60) +#define Z_PROBE_FEEDRATE_FAST (50 * 60) // Feedrate (mm/min) for the "accurate" probe of each point -#define Z_PROBE_FEEDRATE_SLOW (Z_PROBE_FEEDRATE_FAST / 2) +#define Z_PROBE_FEEDRATE_SLOW (Z_PROBE_FEEDRATE_FAST / 10) /** * Probe Activation Switch @@ -1222,19 +1223,19 @@ * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. */ -#define Z_CLEARANCE_DEPLOY_PROBE 15 // Z Clearance for Deploy/Stow +#define Z_CLEARANCE_DEPLOY_PROBE 30 // Z Clearance for Deploy/Stow #define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points #define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes -//#define Z_AFTER_PROBING 5 // Z position after probing is done +#define Z_AFTER_PROBING 30 // Z position after probing is done #define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping // For M851 give a range for adjusting the Z probe offset -#define Z_PROBE_OFFSET_RANGE_MIN -20 +#define Z_PROBE_OFFSET_RANGE_MIN -40 #define Z_PROBE_OFFSET_RANGE_MAX 20 // Enable the M48 repeatability test to test probe accuracy -//#define Z_MIN_PROBE_REPEATABILITY_TEST +#define Z_MIN_PROBE_REPEATABILITY_TEST // Before deploy/stow pause for user confirmation //#define PAUSE_BEFORE_DEPLOY_STOW @@ -1249,14 +1250,14 @@ * These options are most useful for the BLTouch probe, but may also improve * readings with inductive probes and piezo sensors. */ -//#define PROBING_HEATERS_OFF // Turn heaters off when probing +#define PROBING_HEATERS_OFF // Turn heaters off when probing #if ENABLED(PROBING_HEATERS_OFF) //#define WAIT_FOR_BED_HEATER // Wait for bed to heat back up between probes (to improve accuracy) //#define WAIT_FOR_HOTEND // Wait for hotend to heat back up between probes (to improve accuracy & prevent cold extrude) #endif -//#define PROBING_FANS_OFF // Turn fans off when probing +#define PROBING_FANS_OFF // Turn fans off when probing //#define PROBING_STEPPERS_OFF // Turn steppers off (unless needed to hold position) when probing -//#define DELAY_BEFORE_PROBING 200 // (ms) To prevent vibrations from triggering piezo sensors +#define DELAY_BEFORE_PROBING 200 // (ms) To prevent vibrations from triggering piezo sensors // Require minimum nozzle and/or bed temperature for probing //#define PREHEAT_BEFORE_PROBING @@ -1340,7 +1341,7 @@ #define Z_MIN_POS 0 #define X_MAX_POS DELTA_PRINTABLE_RADIUS #define Y_MAX_POS DELTA_PRINTABLE_RADIUS -#define Z_MAX_POS MANUAL_Z_HOME_POS +#define Z_MAX_POS DELTA_HEIGHT /** * Software Endstops @@ -1523,7 +1524,7 @@ // Gradually reduce leveling correction until a set height is reached, // at which point movement will be level to the machine's XY plane. // The height can be set with M420 Z - //#define ENABLE_LEVELING_FADE_HEIGHT + #define ENABLE_LEVELING_FADE_HEIGHT #if ENABLED(ENABLE_LEVELING_FADE_HEIGHT) #define DEFAULT_LEVELING_FADE_HEIGHT 10.0 // (mm) Default fade height. #endif @@ -1553,8 +1554,7 @@ #if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR) // Set the number of grid points per dimension. - // Works best with 5 or more points in each dimension. - #define GRID_MAX_POINTS_X 9 + #define GRID_MAX_POINTS_X 3 #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X // Probe along the Y axis, advancing X after each column @@ -1666,6 +1666,7 @@ * Useful to retract or move the Z probe out of the way. */ //#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" +#define Z_PROBE_END_SCRIPT "G0 Z30 F12000\n G0 X0 Y0 Z30" // @section homing @@ -1695,7 +1696,7 @@ #endif // Delta only homes to Z -#define HOMING_FEEDRATE_MM_M { (200*60), (200*60), (200*60) } +#define HOMING_FEEDRATE_MM_M { (50 * 60), (50 * 60), (50 * 60) } // Validate that endstops are triggered on homing moves #define VALIDATE_HOMING_ENDSTOPS @@ -1772,12 +1773,12 @@ * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) */ -//#define EEPROM_SETTINGS // Persistent storage with M500 and M501 +#define EEPROM_SETTINGS // Persistent storage with M500 and M501 //#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. #define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load #if ENABLED(EEPROM_SETTINGS) - //#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. + #define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. #endif // @@ -1788,7 +1789,7 @@ // #define HOST_KEEPALIVE_FEATURE // Disable this if your host doesn't like keepalive messages #define DEFAULT_KEEPALIVE_INTERVAL 2 // Number of seconds between "busy" messages. Set with M113. -#define BUSY_WHILE_HEATING // Some hosts require "busy" messages even during heating +//#define BUSY_WHILE_HEATING // Some hosts require "busy" messages even during heating // // G20/G21 Inch mode support @@ -1809,13 +1810,13 @@ #define PREHEAT_1_TEMP_HOTEND 180 #define PREHEAT_1_TEMP_BED 70 #define PREHEAT_1_TEMP_CHAMBER 35 -#define PREHEAT_1_FAN_SPEED 255 // Value from 0 to 255 +#define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 #define PREHEAT_2_LABEL "ABS" #define PREHEAT_2_TEMP_HOTEND 240 -#define PREHEAT_2_TEMP_BED 100 +#define PREHEAT_2_TEMP_BED 110 #define PREHEAT_2_TEMP_CHAMBER 35 -#define PREHEAT_2_FAN_SPEED 255 // Value from 0 to 255 +#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 /** * Nozzle Park @@ -1828,11 +1829,11 @@ * P1 Raise the nozzle always to Z-park height. * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. */ -//#define NOZZLE_PARK_FEATURE +#define NOZZLE_PARK_FEATURE #if ENABLED(NOZZLE_PARK_FEATURE) // Specify a park position as { X, Y, Z_raise } - #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), 0, 20 } + #define NOZZLE_PARK_POINT { 0, 0, 20 } //#define NOZZLE_PARK_X_ONLY // X move only is required to park //#define NOZZLE_PARK_Y_ONLY // Y move only is required to park #define NOZZLE_PARK_Z_RAISE_MIN 2 // (mm) Always raise Z by at least this distance @@ -2036,14 +2037,14 @@ * SD Card support is disabled by default. If your controller has an SD slot, * you must uncomment the following option or it won't work. */ -//#define SDSUPPORT +#define SDSUPPORT /** * SD CARD: ENABLE CRC * * Use CRC checks and retries on the SD communication. */ -//#define SD_CHECK_AND_RETRY +#define SD_CHECK_AND_RETRY /** * LCD Menu Items @@ -2618,19 +2619,19 @@ // // Generic TFT with detailed options // -//#define TFT_GENERIC +#define TFT_GENERIC #if ENABLED(TFT_GENERIC) // :[ 'AUTO', 'ST7735', 'ST7789', 'ST7796', 'R61505', 'ILI9328', 'ILI9341', 'ILI9488' ] #define TFT_DRIVER AUTO // Interface. Enable one of the following options: //#define TFT_INTERFACE_FSMC - //#define TFT_INTERFACE_SPI + #define TFT_INTERFACE_SPI // TFT Resolution. Enable one of the following options: //#define TFT_RES_320x240 //#define TFT_RES_480x272 - //#define TFT_RES_480x320 + #define TFT_RES_480x320 #endif /** @@ -2645,7 +2646,7 @@ */ //#define TFT_CLASSIC_UI //#define TFT_COLOR_UI -//#define TFT_LVGL_UI +#define TFT_LVGL_UI #if ENABLED(TFT_LVGL_UI) //#define MKS_WIFI_MODULE // MKS WiFi module @@ -2718,14 +2719,14 @@ // Use software PWM to drive the fan, as for the heaters. This uses a very low frequency // which is not as annoying as with the hardware PWM. On the other hand, if this frequency // is too low, you should also increment SOFT_PWM_SCALE. -//#define FAN_SOFT_PWM +#define FAN_SOFT_PWM // Incrementing this by 1 will double the software PWM frequency, // affecting heaters, and the fan if FAN_SOFT_PWM is enabled. // However, control resolution will be halved for each increment; // at zero value, there are 128 effective control positions. // :[0,1,2,3,4,5,6,7] -#define SOFT_PWM_SCALE 0 +#define SOFT_PWM_SCALE 1 // If SOFT_PWM_SCALE is set to a value higher than 0, dithering can // be used to mitigate the associated resolution loss. If enabled, diff --git a/config/examples/delta/FLSUN/QQ-S/Configuration.h b/config/examples/delta/FLSUN/QQ-S/Configuration.h index 464282b015..4e27442e39 100644 --- a/config/examples/delta/FLSUN/QQ-S/Configuration.h +++ b/config/examples/delta/FLSUN/QQ-S/Configuration.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "delta/FLSUN/QQ-S" + /** * Configuration.h * @@ -69,7 +71,7 @@ // @section info // Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes. +#define STRING_CONFIG_H_AUTHOR "(AndersSahlman, QQ-S config)" // Who made the changes. //#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) /** @@ -102,14 +104,14 @@ * * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] */ -#define SERIAL_PORT 0 +#define SERIAL_PORT 3 /** * Select a secondary serial port on the board to use for communication with the host. * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] */ -//#define SERIAL_PORT_2 -1 +#define SERIAL_PORT_2 1 /** * Select a third serial port on the board to use for communication with the host. @@ -134,11 +136,11 @@ // Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_RAMPS_14_EFB + #define MOTHERBOARD BOARD_MKS_ROBIN_MINI #endif // Name displayed in the LCD "Ready" message and Info menu -#define CUSTOM_MACHINE_NAME "Deltabot" +#define CUSTOM_MACHINE_NAME "FLSUN QQ-S" // Printer's unique ID, used by some programs to differentiate between machines. // Choose your own or use a service like https://www.uuidgenerator.net/version4 @@ -318,7 +320,7 @@ * Enable and connect the power supply to the PS_ON_PIN. * Specify whether the power supply is active HIGH or active LOW. */ -#define PSU_CONTROL +//#define PSU_CONTROL //#define PSU_NAME "Power Supply" #if ENABLED(PSU_CONTROL) @@ -416,7 +418,7 @@ * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. */ -#define TEMP_SENSOR_0 -1 +#define TEMP_SENSOR_0 1 #define TEMP_SENSOR_1 0 #define TEMP_SENSOR_2 0 #define TEMP_SENSOR_3 0 @@ -424,7 +426,7 @@ #define TEMP_SENSOR_5 0 #define TEMP_SENSOR_6 0 #define TEMP_SENSOR_7 0 -#define TEMP_SENSOR_BED 0 +#define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 #define TEMP_SENSOR_COOLER 0 @@ -448,7 +450,7 @@ #define TEMP_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer #define TEMP_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target -#define TEMP_BED_RESIDENCY_TIME 0 // (seconds) Time to wait for bed to "settle" in M190 +#define TEMP_BED_RESIDENCY_TIME 10 // (seconds) Time to wait for bed to "settle" in M190 #define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer #define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target @@ -480,7 +482,7 @@ #define HEATER_5_MAXTEMP 275 #define HEATER_6_MAXTEMP 275 #define HEATER_7_MAXTEMP 275 -#define BED_MAXTEMP 150 +#define BED_MAXTEMP 110 #define CHAMBER_MAXTEMP 60 /** @@ -505,21 +507,22 @@ #define PID_K1 0.95 // Smoothing factor within any PID loop #if ENABLED(PIDTEMP) - //#define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) - //#define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) + #define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) + #define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) // Set/get with gcode: M301 E[extruder number, 0-2] + // FLSUN QQ-S, 200 C with 100% part cooling #if ENABLED(PID_PARAMS_PER_HOTEND) // Specify between 1 and HOTENDS values per array. // If fewer than EXTRUDER values are provided, the last element will be repeated. - #define DEFAULT_Kp_LIST { 22.20, 22.20 } - #define DEFAULT_Ki_LIST { 1.08, 1.08 } - #define DEFAULT_Kd_LIST { 114.00, 114.00 } + #define DEFAULT_Kp_LIST { 28.16, 28.16 } + #define DEFAULT_Ki_LIST { 3.38, 3.38 } + #define DEFAULT_Kd_LIST { 58.69, 58.69 } #else - #define DEFAULT_Kp 22.20 - #define DEFAULT_Ki 1.08 - #define DEFAULT_Kd 114.00 + #define DEFAULT_Kp 28.16 + #define DEFAULT_Ki 3.38 + #define DEFAULT_Kd 58.69 #endif #endif // PIDTEMP @@ -540,7 +543,7 @@ * heater. If your configuration is significantly different than this and you don't understand * the issues involved, don't use bed PID until someone else verifies that your hardware works. */ -//#define PIDTEMPBED +#define PIDTEMPBED //#define BED_LIMIT_SWITCHING @@ -556,11 +559,10 @@ //#define MIN_BED_POWER 0 //#define PID_BED_DEBUG // Sends debug data to the serial port. - // 120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - // from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) - #define DEFAULT_bedKp 10.00 - #define DEFAULT_bedKi .023 - #define DEFAULT_bedKd 305.4 + // FLSUN QQ-S stock 1.6mm aluminium heater with 4mm lattice glass + #define DEFAULT_bedKp 325.10 + #define DEFAULT_bedKi 63.35 + #define DEFAULT_bedKd 417.10 // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. #endif // PIDTEMPBED @@ -634,7 +636,7 @@ * Note: For Bowden Extruders make this large enough to allow load/unload. */ #define PREVENT_LENGTHY_EXTRUDE -#define EXTRUDE_MAXLENGTH 200 +#define EXTRUDE_MAXLENGTH 800 //=========================================================================== //======================== Thermal Runaway Protection ======================= @@ -693,16 +695,16 @@ // Delta calibration menu // uncomment to add three points calibration menu option. // See http://minow.blogspot.com/index.html#4918805519571907051 - //#define DELTA_CALIBRATION_MENU + #define DELTA_CALIBRATION_MENU // uncomment to add G33 Delta Auto-Calibration (Enable EEPROM_SETTINGS to store results) - //#define DELTA_AUTO_CALIBRATION + #define DELTA_AUTO_CALIBRATION // NOTE NB all values for DELTA_* values MUST be floating point, so always have a decimal point in them #if ENABLED(DELTA_AUTO_CALIBRATION) // set the default number of probe points : n*n (1 -> 7) - #define DELTA_CALIBRATION_DEFAULT_POINTS 4 + #define DELTA_CALIBRATION_DEFAULT_POINTS 7 #endif #if EITHER(DELTA_AUTO_CALIBRATION, DELTA_CALIBRATION_MENU) @@ -711,18 +713,18 @@ #endif // Print surface diameter/2 minus unreachable space (avoid collisions with vertical towers). - #define DELTA_PRINTABLE_RADIUS 140.0 // (mm) + #define DELTA_PRINTABLE_RADIUS 130.0 // (mm) // Center-to-center distance of the holes in the diagonal push rods. - #define DELTA_DIAGONAL_ROD 250.0 // (mm) + #define DELTA_DIAGONAL_ROD 280.0 // (mm) // Distance between bed and nozzle Z home position - #define DELTA_HEIGHT 250.00 // (mm) Get this value from G33 auto calibrate + #define DELTA_HEIGHT 372.00 // (mm) Get this value from G33 auto calibrate #define DELTA_ENDSTOP_ADJ { 0.0, 0.0, 0.0 } // Get these values from G33 auto calibrate // Horizontal distance bridged by diagonal push rods when effector is centered. - #define DELTA_RADIUS 124.0 // (mm) Get this value from G33 auto calibrate + #define DELTA_RADIUS 140.8 // (mm) Get this value from G33 auto calibrate // Trim adjustments for individual towers // tower angle corrections for X and Y tower / rotate XYZ so Z tower angle = 0 @@ -778,12 +780,12 @@ #endif // Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define X_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. +#define Y_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. #define Z_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define X_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Y_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Z_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define X_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. +#define Y_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. +#define Z_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. #define Z_MIN_PROBE_ENDSTOP_INVERTING true // Set to true to invert the logic of the probe. /** @@ -872,18 +874,18 @@ #define XYZ_FULL_STEPS_PER_ROTATION 200 #define XYZ_MICROSTEPS 16 #define XYZ_BELT_PITCH 2 -#define XYZ_PULLEY_TEETH 20 +#define XYZ_PULLEY_TEETH 16 // delta speeds must be the same on xyz #define DEFAULT_XYZ_STEPS_PER_UNIT ((XYZ_FULL_STEPS_PER_ROTATION) * (XYZ_MICROSTEPS) / double(XYZ_BELT_PITCH) / double(XYZ_PULLEY_TEETH)) -#define DEFAULT_AXIS_STEPS_PER_UNIT { DEFAULT_XYZ_STEPS_PER_UNIT, DEFAULT_XYZ_STEPS_PER_UNIT, DEFAULT_XYZ_STEPS_PER_UNIT, 760*1.1 } // default steps per unit for Kossel (GT2, 20 tooth) +#define DEFAULT_AXIS_STEPS_PER_UNIT { DEFAULT_XYZ_STEPS_PER_UNIT, DEFAULT_XYZ_STEPS_PER_UNIT, DEFAULT_XYZ_STEPS_PER_UNIT, 393 } // default steps per unit /** * Default Max Feed Rate (mm/s) * Override with M203 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_FEEDRATE { 500, 500, 500, 25 } +#define DEFAULT_MAX_FEEDRATE { 200, 200, 200, 200 } //#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 #if ENABLED(LIMITED_MAX_FR_EDITING) @@ -896,7 +898,7 @@ * Override with M201 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_ACCELERATION { 9000, 9000, 9000, 10000 } +#define DEFAULT_MAX_ACCELERATION { 1000, 1000, 1000, 1000 } //#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 #if ENABLED(LIMITED_MAX_ACCEL_EDITING) @@ -911,9 +913,9 @@ * M204 R Retract Acceleration * M204 T Travel Acceleration */ -#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves +#define DEFAULT_ACCELERATION 1000 // X, Y, Z and E acceleration for printing moves +#define DEFAULT_RETRACT_ACCELERATION 1000 // E acceleration for retracts +#define DEFAULT_TRAVEL_ACCELERATION 1000 // X, Y, Z acceleration for travel (non printing) moves /** * Default Jerk limits (mm/s) @@ -960,7 +962,7 @@ * * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained */ -//#define S_CURVE_ACCELERATION +#define S_CURVE_ACCELERATION //=========================================================================== //============================= Z Probe Options ============================= @@ -1016,7 +1018,7 @@ * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. * (e.g., an inductive probe or a nozzle-based probe-switch.) */ -//#define FIX_MOUNTED_PROBE +#define FIX_MOUNTED_PROBE /** * Use the nozzle as the probe, as with a conductive @@ -1154,20 +1156,20 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 0, -10, -3.5 } +#define NOZZLE_TO_PROBE_OFFSET { 0, 0, 0 } // Most probes should stay away from the edges of the bed, but // with NOZZLE_AS_PROBE this can be negative for a wider probing area. -#define PROBING_MARGIN 10 +#define PROBING_MARGIN 20 // X and Y axis travel speed (mm/min) between probes #define XY_PROBE_FEEDRATE (66*60) // Feedrate (mm/min) for the first approach when double-probing (MULTIPLE_PROBING == 2) -#define Z_PROBE_FEEDRATE_FAST (200*60) +#define Z_PROBE_FEEDRATE_FAST (50*60) // Feedrate (mm/min) for the "accurate" probe of each point -#define Z_PROBE_FEEDRATE_SLOW (Z_PROBE_FEEDRATE_FAST / 2) +#define Z_PROBE_FEEDRATE_SLOW (Z_PROBE_FEEDRATE_FAST / 10) /** * Probe Activation Switch @@ -1205,7 +1207,7 @@ * A total of 2 does fast/slow probes with a weighted average. * A total of 3 or more adds more slow probes, taking the average. */ -//#define MULTIPLE_PROBING 2 +#define MULTIPLE_PROBING 3 //#define EXTRA_PROBING 1 /** @@ -1222,10 +1224,10 @@ * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. */ -#define Z_CLEARANCE_DEPLOY_PROBE 15 // Z Clearance for Deploy/Stow +#define Z_CLEARANCE_DEPLOY_PROBE 30 // Z Clearance for Deploy/Stow #define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points #define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes -//#define Z_AFTER_PROBING 5 // Z position after probing is done +#define Z_AFTER_PROBING 30 // Z position after probing is done #define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping @@ -1234,7 +1236,7 @@ #define Z_PROBE_OFFSET_RANGE_MAX 20 // Enable the M48 repeatability test to test probe accuracy -//#define Z_MIN_PROBE_REPEATABILITY_TEST +#define Z_MIN_PROBE_REPEATABILITY_TEST // Before deploy/stow pause for user confirmation //#define PAUSE_BEFORE_DEPLOY_STOW @@ -1256,7 +1258,7 @@ #endif //#define PROBING_FANS_OFF // Turn fans off when probing //#define PROBING_STEPPERS_OFF // Turn steppers off (unless needed to hold position) when probing -//#define DELAY_BEFORE_PROBING 200 // (ms) To prevent vibrations from triggering piezo sensors +#define DELAY_BEFORE_PROBING 200 // (ms) To prevent vibrations from triggering piezo sensors // Require minimum nozzle and/or bed temperature for probing //#define PREHEAT_BEFORE_PROBING @@ -1296,7 +1298,7 @@ // @section extruder // For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR false +#define INVERT_E0_DIR true #define INVERT_E1_DIR false #define INVERT_E2_DIR false #define INVERT_E3_DIR false @@ -1368,7 +1370,7 @@ #endif #if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS) - //#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD + #define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD #endif /** @@ -1486,7 +1488,7 @@ */ //#define AUTO_BED_LEVELING_3POINT //#define AUTO_BED_LEVELING_LINEAR -//#define AUTO_BED_LEVELING_BILINEAR +#define AUTO_BED_LEVELING_BILINEAR //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING @@ -1495,7 +1497,7 @@ * these options to restore the prior leveling state or to always enable * leveling immediately after G28. */ -//#define RESTORE_LEVELING_AFTER_G28 +#define RESTORE_LEVELING_AFTER_G28 //#define ENABLE_LEVELING_AFTER_G28 /** @@ -1665,7 +1667,7 @@ * Commands to execute at the end of G29 probing. * Useful to retract or move the Z probe out of the way. */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" +#define Z_PROBE_END_SCRIPT "G0 Z30 F12000\n G0 X0 Y0 Z30" // @section homing @@ -1695,7 +1697,7 @@ #endif // Delta only homes to Z -#define HOMING_FEEDRATE_MM_M { (200*60), (200*60), (200*60) } +#define HOMING_FEEDRATE_MM_M { (50*60), (50*60), (50*60) } // Validate that endstops are triggered on homing moves #define VALIDATE_HOMING_ENDSTOPS @@ -1772,7 +1774,7 @@ * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) */ -//#define EEPROM_SETTINGS // Persistent storage with M500 and M501 +#define EEPROM_SETTINGS // Persistent storage with M500 and M501 //#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. #define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load @@ -1786,9 +1788,9 @@ // When enabled Marlin will send a busy status message to the host // every couple of seconds when it can't accept commands. // -#define HOST_KEEPALIVE_FEATURE // Disable this if your host doesn't like keepalive messages -#define DEFAULT_KEEPALIVE_INTERVAL 2 // Number of seconds between "busy" messages. Set with M113. -#define BUSY_WHILE_HEATING // Some hosts require "busy" messages even during heating +//#define HOST_KEEPALIVE_FEATURE // Disable this if your host doesn't like keepalive messages +//#define DEFAULT_KEEPALIVE_INTERVAL 2 // Number of seconds between "busy" messages. Set with M113. +//#define BUSY_WHILE_HEATING // Some hosts require "busy" messages even during heating // // G20/G21 Inch mode support @@ -1806,16 +1808,16 @@ // Preheat Constants - Up to 5 are supported without changes // #define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 180 -#define PREHEAT_1_TEMP_BED 70 +#define PREHEAT_1_TEMP_HOTEND 200 +#define PREHEAT_1_TEMP_BED 60 #define PREHEAT_1_TEMP_CHAMBER 35 -#define PREHEAT_1_FAN_SPEED 255 // Value from 0 to 255 +#define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 -#define PREHEAT_2_LABEL "ABS" -#define PREHEAT_2_TEMP_HOTEND 240 -#define PREHEAT_2_TEMP_BED 100 +#define PREHEAT_2_LABEL "PETG" +#define PREHEAT_2_TEMP_HOTEND 235 +#define PREHEAT_2_TEMP_BED 80 #define PREHEAT_2_TEMP_CHAMBER 35 -#define PREHEAT_2_FAN_SPEED 255 // Value from 0 to 255 +#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 /** * Nozzle Park @@ -1828,11 +1830,11 @@ * P1 Raise the nozzle always to Z-park height. * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. */ -//#define NOZZLE_PARK_FEATURE +#define NOZZLE_PARK_FEATURE #if ENABLED(NOZZLE_PARK_FEATURE) // Specify a park position as { X, Y, Z_raise } - #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), 0, 20 } + #define NOZZLE_PARK_POINT { 0, 0, 20 } //#define NOZZLE_PARK_X_ONLY // X move only is required to park //#define NOZZLE_PARK_Y_ONLY // Y move only is required to park #define NOZZLE_PARK_Z_RAISE_MIN 2 // (mm) Always raise Z by at least this distance @@ -2036,7 +2038,7 @@ * SD Card support is disabled by default. If your controller has an SD slot, * you must uncomment the following option or it won't work. */ -//#define SDSUPPORT +#define SDSUPPORT /** * SD CARD: ENABLE CRC @@ -2618,17 +2620,17 @@ // // Generic TFT with detailed options // -//#define TFT_GENERIC +#define TFT_GENERIC #if ENABLED(TFT_GENERIC) // :[ 'AUTO', 'ST7735', 'ST7789', 'ST7796', 'R61505', 'ILI9328', 'ILI9341', 'ILI9488' ] #define TFT_DRIVER AUTO // Interface. Enable one of the following options: - //#define TFT_INTERFACE_FSMC + #define TFT_INTERFACE_FSMC //#define TFT_INTERFACE_SPI // TFT Resolution. Enable one of the following options: - //#define TFT_RES_320x240 + #define TFT_RES_320x240 //#define TFT_RES_480x272 //#define TFT_RES_480x320 #endif @@ -2643,7 +2645,7 @@ * For LVGL_UI also copy the 'assets' folder from the build directory to the * root of your SD card, together with the compiled firmware. */ -//#define TFT_CLASSIC_UI +#define TFT_CLASSIC_UI //#define TFT_COLOR_UI //#define TFT_LVGL_UI @@ -2673,17 +2675,17 @@ // // Touch Screen Settings // -//#define TOUCH_SCREEN +#define TOUCH_SCREEN #if ENABLED(TOUCH_SCREEN) - #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens - #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus + #define BUTTON_DELAY_EDIT 75 // (ms) Button repeat delay for edit screens + #define BUTTON_DELAY_MENU 100 // (ms) Button repeat delay for menus #define TOUCH_SCREEN_CALIBRATION - //#define TOUCH_CALIBRATION_X 12316 - //#define TOUCH_CALIBRATION_Y -8981 - //#define TOUCH_OFFSET_X -43 - //#define TOUCH_OFFSET_Y 257 + #define TOUCH_CALIBRATION_X 12316 + #define TOUCH_CALIBRATION_Y -8981 + #define TOUCH_OFFSET_X -43 + #define TOUCH_OFFSET_Y 257 //#define TOUCH_ORIENTATION TOUCH_LANDSCAPE #if BOTH(TOUCH_SCREEN_CALIBRATION, EEPROM_SETTINGS) @@ -2718,14 +2720,14 @@ // Use software PWM to drive the fan, as for the heaters. This uses a very low frequency // which is not as annoying as with the hardware PWM. On the other hand, if this frequency // is too low, you should also increment SOFT_PWM_SCALE. -//#define FAN_SOFT_PWM +#define FAN_SOFT_PWM // Incrementing this by 1 will double the software PWM frequency, // affecting heaters, and the fan if FAN_SOFT_PWM is enabled. // However, control resolution will be halved for each increment; // at zero value, there are 128 effective control positions. // :[0,1,2,3,4,5,6,7] -#define SOFT_PWM_SCALE 0 +#define SOFT_PWM_SCALE 1 // If SOFT_PWM_SCALE is set to a value higher than 0, dithering can // be used to mitigate the associated resolution loss. If enabled, diff --git a/config/examples/delta/FLSUN/QQ-S/Configuration_adv.h b/config/examples/delta/FLSUN/QQ-S/Configuration_adv.h index aa6bbae7e4..46e506f348 100644 --- a/config/examples/delta/FLSUN/QQ-S/Configuration_adv.h +++ b/config/examples/delta/FLSUN/QQ-S/Configuration_adv.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "delta/FLSUN/QQ-S" + /** * Configuration_adv.h * @@ -479,7 +481,7 @@ // When first starting the main fan, run it at full speed for the // given number of milliseconds. This gets the fan spinning reliably // before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) -//#define FAN_KICKSTART_TIME 100 +#define FAN_KICKSTART_TIME 100 // Some coolers may require a non-zero "off" state. //#define FAN_OFF_PWM 1 @@ -1383,10 +1385,10 @@ //#define UTF_FILENAME_SUPPORT // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT + #define LONG_FILENAME_HOST_SUPPORT // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES + #define SCROLL_LONG_FILENAMES // Leave the heaters on after Stop Print (not recommended!) //#define SD_ABORT_NO_COOLDOWN @@ -1792,7 +1794,7 @@ * * Warning: Does not respect endstops! */ -//#define BABYSTEPPING +#define BABYSTEPPING #if ENABLED(BABYSTEPPING) //#define INTEGRATED_BABYSTEPPING // EXPERIMENTAL integration of babystepping into the Stepper ISR //#define BABYSTEP_WITHOUT_HOMING @@ -1803,7 +1805,7 @@ #define BABYSTEP_MULTIPLICATOR_Z 1 // (steps or mm) Steps or millimeter distance for each Z babystep #define BABYSTEP_MULTIPLICATOR_XY 1 // (steps or mm) Steps or millimeter distance for each XY babystep - //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. + #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. // Note: Extra time may be added to mitigate controller latency. @@ -2313,28 +2315,28 @@ * * Enable PARK_HEAD_ON_PAUSE to add the G-code M125 Pause and Park. */ -//#define ADVANCED_PAUSE_FEATURE +#define ADVANCED_PAUSE_FEATURE #if ENABLED(ADVANCED_PAUSE_FEATURE) #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. // This short retract is done immediately, before parking the nozzle. - #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast. + #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 40 // (mm/s) Unload filament feedrate. This can be pretty fast. #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload. + #define FILAMENT_CHANGE_UNLOAD_LENGTH 800 // (mm) The length of filament for a complete unload. // For Bowden, the full length of the tube and nozzle. // For direct drive, the full length of the nozzle. // Set to 0 for manual unloading. #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE 6 // (mm/s) Slow move when starting load. #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 0 // (mm) Slow length, to allow time to insert material. // 0 to disable start loading and skip to fast load only - #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast. + #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 40 // (mm/s) Load filament feedrate. This can be pretty fast. #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle. + #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 700 // (mm) Load length of filament, from extruder gear to nozzle. // For Bowden, the full length of the tube and nozzle. // For direct drive, the full length of the nozzle. - //#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted. + #define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted. #define ADVANCED_PAUSE_PURGE_FEEDRATE 3 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate. - #define ADVANCED_PAUSE_PURGE_LENGTH 50 // (mm) Length to extrude after loading. + #define ADVANCED_PAUSE_PURGE_LENGTH 150 // (mm) Length to extrude after loading. // Set to 0 for manual extrusion. // Filament can be extruded repeatedly from the Filament Change menu // until extrusion is consistent, and to purge old filament. @@ -2351,10 +2353,10 @@ #define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed. #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change. - //#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. - //#define HOME_BEFORE_FILAMENT_CHANGE // If needed, home before parking for filament change + #define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. + #define HOME_BEFORE_FILAMENT_CHANGE // If needed, home before parking for filament change - //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. + #define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) #endif diff --git a/config/examples/delta/FLSUN/QQS-Pro/Configuration.h b/config/examples/delta/FLSUN/QQS-Pro/Configuration.h index 464282b015..f8f26160ee 100644 --- a/config/examples/delta/FLSUN/QQS-Pro/Configuration.h +++ b/config/examples/delta/FLSUN/QQS-Pro/Configuration.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "delta/FLSUN/QQS-Pro" + /** * Configuration.h * @@ -69,7 +71,7 @@ // @section info // Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes. +#define STRING_CONFIG_H_AUTHOR "(Foxies-CSTL, QQS-Pro)" // Who made the changes. //#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) /** @@ -102,14 +104,14 @@ * * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] */ -#define SERIAL_PORT 0 +#define SERIAL_PORT 3 /** * Select a secondary serial port on the board to use for communication with the host. * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] */ -//#define SERIAL_PORT_2 -1 +#define SERIAL_PORT_2 1 /** * Select a third serial port on the board to use for communication with the host. @@ -134,11 +136,11 @@ // Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_RAMPS_14_EFB + #define MOTHERBOARD BOARD_FLSUN_HISPEED #endif // Name displayed in the LCD "Ready" message and Info menu -#define CUSTOM_MACHINE_NAME "Deltabot" +#define CUSTOM_MACHINE_NAME "FLSUN QQS-Pro" // Printer's unique ID, used by some programs to differentiate between machines. // Choose your own or use a service like https://www.uuidgenerator.net/version4 @@ -318,7 +320,7 @@ * Enable and connect the power supply to the PS_ON_PIN. * Specify whether the power supply is active HIGH or active LOW. */ -#define PSU_CONTROL +//#define PSU_CONTROL //#define PSU_NAME "Power Supply" #if ENABLED(PSU_CONTROL) @@ -416,7 +418,7 @@ * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. */ -#define TEMP_SENSOR_0 -1 +#define TEMP_SENSOR_0 1 #define TEMP_SENSOR_1 0 #define TEMP_SENSOR_2 0 #define TEMP_SENSOR_3 0 @@ -424,7 +426,7 @@ #define TEMP_SENSOR_5 0 #define TEMP_SENSOR_6 0 #define TEMP_SENSOR_7 0 -#define TEMP_SENSOR_BED 0 +#define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 #define TEMP_SENSOR_COOLER 0 @@ -448,7 +450,7 @@ #define TEMP_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer #define TEMP_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target -#define TEMP_BED_RESIDENCY_TIME 0 // (seconds) Time to wait for bed to "settle" in M190 +#define TEMP_BED_RESIDENCY_TIME 10 // (seconds) Time to wait for bed to "settle" in M190 #define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer #define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target @@ -480,7 +482,7 @@ #define HEATER_5_MAXTEMP 275 #define HEATER_6_MAXTEMP 275 #define HEATER_7_MAXTEMP 275 -#define BED_MAXTEMP 150 +#define BED_MAXTEMP 120 #define CHAMBER_MAXTEMP 60 /** @@ -505,21 +507,22 @@ #define PID_K1 0.95 // Smoothing factor within any PID loop #if ENABLED(PIDTEMP) - //#define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) - //#define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) + #define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) + #define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) // Set/get with gcode: M301 E[extruder number, 0-2] #if ENABLED(PID_PARAMS_PER_HOTEND) // Specify between 1 and HOTENDS values per array. // If fewer than EXTRUDER values are provided, the last element will be repeated. - #define DEFAULT_Kp_LIST { 22.20, 22.20 } - #define DEFAULT_Ki_LIST { 1.08, 1.08 } - #define DEFAULT_Kd_LIST { 114.00, 114.00 } + #define DEFAULT_Kp_LIST { 21.6708, 21.6708 } + #define DEFAULT_Ki_LIST { 1.2515, 1.2515 } + #define DEFAULT_Kd_LIST { 93.8127, 93.8127 } #else - #define DEFAULT_Kp 22.20 - #define DEFAULT_Ki 1.08 - #define DEFAULT_Kd 114.00 + // FLSUN QQS-Pro, PET 235 C with 70% part cooling + #define DEFAULT_Kp 21.6708 + #define DEFAULT_Ki 1.2515 + #define DEFAULT_Kd 93.8127 #endif #endif // PIDTEMP @@ -540,7 +543,7 @@ * heater. If your configuration is significantly different than this and you don't understand * the issues involved, don't use bed PID until someone else verifies that your hardware works. */ -//#define PIDTEMPBED +#define PIDTEMPBED //#define BED_LIMIT_SWITCHING @@ -556,11 +559,10 @@ //#define MIN_BED_POWER 0 //#define PID_BED_DEBUG // Sends debug data to the serial port. - // 120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - // from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) - #define DEFAULT_bedKp 10.00 - #define DEFAULT_bedKi .023 - #define DEFAULT_bedKd 305.4 + // FLSUN QQS-Pro 1.6mm aluminium heater with 4mm lattice glass + #define DEFAULT_bedKp 82.98 + #define DEFAULT_bedKi 15.93 + #define DEFAULT_bedKd 288.25 // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. #endif // PIDTEMPBED @@ -613,7 +615,7 @@ //#define PID_DEBUG // Sends debug data to the serial port. Use 'M303 D' to toggle activation. //#define PID_OPENLOOP // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX //#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay - #define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature + #define PID_FUNCTIONAL_RANGE 30 // If the temperature difference between the target temperature and the actual temperature // is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max. #endif @@ -634,7 +636,7 @@ * Note: For Bowden Extruders make this large enough to allow load/unload. */ #define PREVENT_LENGTHY_EXTRUDE -#define EXTRUDE_MAXLENGTH 200 +#define EXTRUDE_MAXLENGTH 950 //=========================================================================== //======================== Thermal Runaway Protection ======================= @@ -655,8 +657,8 @@ #define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders #define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed -#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber -#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling +//#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber +//#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling //=========================================================================== //============================= Mechanical Settings ========================= @@ -685,7 +687,7 @@ // Make delta curves from many straight lines (linear interpolation). // This is a trade-off between visible corners (not enough segments) // and processor overload (too many expensive sqrt calls). - #define DELTA_SEGMENTS_PER_SECOND 200 + #define DELTA_SEGMENTS_PER_SECOND 80 // After homing move down to a height where XY movement is unconstrained //#define DELTA_HOME_TO_SAFE_ZONE @@ -693,10 +695,10 @@ // Delta calibration menu // uncomment to add three points calibration menu option. // See http://minow.blogspot.com/index.html#4918805519571907051 - //#define DELTA_CALIBRATION_MENU + #define DELTA_CALIBRATION_MENU // uncomment to add G33 Delta Auto-Calibration (Enable EEPROM_SETTINGS to store results) - //#define DELTA_AUTO_CALIBRATION + #define DELTA_AUTO_CALIBRATION // NOTE NB all values for DELTA_* values MUST be floating point, so always have a decimal point in them @@ -711,18 +713,18 @@ #endif // Print surface diameter/2 minus unreachable space (avoid collisions with vertical towers). - #define DELTA_PRINTABLE_RADIUS 140.0 // (mm) + #define DELTA_PRINTABLE_RADIUS 130.0 // (mm) // Center-to-center distance of the holes in the diagonal push rods. - #define DELTA_DIAGONAL_ROD 250.0 // (mm) + #define DELTA_DIAGONAL_ROD 280.00 // (mm) // Distance between bed and nozzle Z home position - #define DELTA_HEIGHT 250.00 // (mm) Get this value from G33 auto calibrate + #define DELTA_HEIGHT 370.00 // (mm) Get this value from G33 auto calibrate #define DELTA_ENDSTOP_ADJ { 0.0, 0.0, 0.0 } // Get these values from G33 auto calibrate // Horizontal distance bridged by diagonal push rods when effector is centered. - #define DELTA_RADIUS 124.0 // (mm) Get this value from G33 auto calibrate + #define DELTA_RADIUS 140.8 // (mm) Get this value from G33 auto calibrate // Trim adjustments for individual towers // tower angle corrections for X and Y tower / rotate XYZ so Z tower angle = 0 @@ -731,7 +733,7 @@ // Delta radius and diagonal rod adjustments (mm) //#define DELTA_RADIUS_TRIM_TOWER { 0.0, 0.0, 0.0 } - //#define DELTA_DIAGONAL_ROD_TRIM_TOWER { 0.0, 0.0, 0.0 } + #define DELTA_DIAGONAL_ROD_TRIM_TOWER { 0.0, 0.0, 0.0 } #endif @@ -778,12 +780,12 @@ #endif // Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define X_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. +#define Y_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. #define Z_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define X_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Y_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Z_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define X_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. +#define Y_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. +#define Z_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. #define Z_MIN_PROBE_ENDSTOP_INVERTING true // Set to true to invert the logic of the probe. /** @@ -872,18 +874,18 @@ #define XYZ_FULL_STEPS_PER_ROTATION 200 #define XYZ_MICROSTEPS 16 #define XYZ_BELT_PITCH 2 -#define XYZ_PULLEY_TEETH 20 +#define XYZ_PULLEY_TEETH 16 // delta speeds must be the same on xyz #define DEFAULT_XYZ_STEPS_PER_UNIT ((XYZ_FULL_STEPS_PER_ROTATION) * (XYZ_MICROSTEPS) / double(XYZ_BELT_PITCH) / double(XYZ_PULLEY_TEETH)) -#define DEFAULT_AXIS_STEPS_PER_UNIT { DEFAULT_XYZ_STEPS_PER_UNIT, DEFAULT_XYZ_STEPS_PER_UNIT, DEFAULT_XYZ_STEPS_PER_UNIT, 760*1.1 } // default steps per unit for Kossel (GT2, 20 tooth) +#define DEFAULT_AXIS_STEPS_PER_UNIT { DEFAULT_XYZ_STEPS_PER_UNIT, DEFAULT_XYZ_STEPS_PER_UNIT, DEFAULT_XYZ_STEPS_PER_UNIT, 396 } // default steps per unit /** * Default Max Feed Rate (mm/s) * Override with M203 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_FEEDRATE { 500, 500, 500, 25 } +#define DEFAULT_MAX_FEEDRATE { 250, 250, 250, 210 } //#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 #if ENABLED(LIMITED_MAX_FR_EDITING) @@ -896,11 +898,11 @@ * Override with M201 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_ACCELERATION { 9000, 9000, 9000, 10000 } +#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 3000, 3000 } //#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 #if ENABLED(LIMITED_MAX_ACCEL_EDITING) - #define MAX_ACCEL_EDIT_VALUES { 6000, 6000, 200, 20000 } // ...or, set your own edit limits + #define MAX_ACCEL_EDIT_VALUES { 6000, 6000, 3000, 20000 } // ...or, set your own edit limits #endif /** @@ -912,7 +914,7 @@ * M204 T Travel Acceleration */ #define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts +#define DEFAULT_RETRACT_ACCELERATION 1500 // E acceleration for retracts #define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves /** @@ -933,7 +935,7 @@ //#define LIMITED_JERK_EDITING // Limit edit via M205 or LCD to DEFAULT_aJERK * 2 #if ENABLED(LIMITED_JERK_EDITING) - #define MAX_JERK_EDIT_VALUES { 20, 20, 0.6, 10 } // ...or, set your own edit limits + #define MAX_JERK_EDIT_VALUES { 20, 20, 20, 10 } // ...or, set your own edit limits #endif #endif @@ -960,7 +962,7 @@ * * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained */ -//#define S_CURVE_ACCELERATION +#define S_CURVE_ACCELERATION //=========================================================================== //============================= Z Probe Options ============================= @@ -1016,7 +1018,7 @@ * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. * (e.g., an inductive probe or a nozzle-based probe-switch.) */ -//#define FIX_MOUNTED_PROBE +#define FIX_MOUNTED_PROBE /** * Use the nozzle as the probe, as with a conductive @@ -1154,20 +1156,20 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 0, -10, -3.5 } +#define NOZZLE_TO_PROBE_OFFSET { 0, 0, -16.2 } // Most probes should stay away from the edges of the bed, but // with NOZZLE_AS_PROBE this can be negative for a wider probing area. -#define PROBING_MARGIN 10 +#define PROBING_MARGIN 15 // X and Y axis travel speed (mm/min) between probes #define XY_PROBE_FEEDRATE (66*60) // Feedrate (mm/min) for the first approach when double-probing (MULTIPLE_PROBING == 2) -#define Z_PROBE_FEEDRATE_FAST (200*60) +#define Z_PROBE_FEEDRATE_FAST (40*60) // Feedrate (mm/min) for the "accurate" probe of each point -#define Z_PROBE_FEEDRATE_SLOW (Z_PROBE_FEEDRATE_FAST / 2) +#define Z_PROBE_FEEDRATE_SLOW (Z_PROBE_FEEDRATE_FAST / 4) /** * Probe Activation Switch @@ -1205,8 +1207,8 @@ * A total of 2 does fast/slow probes with a weighted average. * A total of 3 or more adds more slow probes, taking the average. */ -//#define MULTIPLE_PROBING 2 -//#define EXTRA_PROBING 1 +#define MULTIPLE_PROBING 2 +//#define EXTRA_PROBING 1 /** * Z probes require clearance when deploying, stowing, and moving between @@ -1222,22 +1224,22 @@ * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. */ -#define Z_CLEARANCE_DEPLOY_PROBE 15 // Z Clearance for Deploy/Stow -#define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points +#define Z_CLEARANCE_DEPLOY_PROBE 20 // Z Clearance for Deploy/Stow +#define Z_CLEARANCE_BETWEEN_PROBES 15 // Z Clearance between probe points #define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes -//#define Z_AFTER_PROBING 5 // Z position after probing is done +//#define Z_AFTER_PROBING 100 // Z position after probing is done -#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping +#define Z_PROBE_LOW_POINT -4 // Farthest distance below the trigger-point to go before stopping // For M851 give a range for adjusting the Z probe offset -#define Z_PROBE_OFFSET_RANGE_MIN -20 +#define Z_PROBE_OFFSET_RANGE_MIN -25 #define Z_PROBE_OFFSET_RANGE_MAX 20 // Enable the M48 repeatability test to test probe accuracy -//#define Z_MIN_PROBE_REPEATABILITY_TEST +#define Z_MIN_PROBE_REPEATABILITY_TEST // Before deploy/stow pause for user confirmation -//#define PAUSE_BEFORE_DEPLOY_STOW +#define PAUSE_BEFORE_DEPLOY_STOW #if ENABLED(PAUSE_BEFORE_DEPLOY_STOW) //#define PAUSE_PROBE_DEPLOY_WHEN_TRIGGERED // For Manual Deploy Allenkey Probe #endif @@ -1259,10 +1261,10 @@ //#define DELAY_BEFORE_PROBING 200 // (ms) To prevent vibrations from triggering piezo sensors // Require minimum nozzle and/or bed temperature for probing -//#define PREHEAT_BEFORE_PROBING +#define PREHEAT_BEFORE_PROBING #if ENABLED(PREHEAT_BEFORE_PROBING) - #define PROBING_NOZZLE_TEMP 120 // (°C) Only applies to E0 at this time - #define PROBING_BED_TEMP 50 + //#define PROBING_NOZZLE_TEMP 120 // (°C) Only applies to E0 at this time + #define PROBING_BED_TEMP 60 #endif // For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1 @@ -1289,14 +1291,14 @@ // @section machine // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR false +#define INVERT_X_DIR false // Set 'true' for TMC220x #define INVERT_Y_DIR false #define INVERT_Z_DIR false // @section extruder // For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR false +#define INVERT_E0_DIR true // TITAN Extruder #define INVERT_E1_DIR false #define INVERT_E2_DIR false #define INVERT_E3_DIR false @@ -1340,7 +1342,7 @@ #define Z_MIN_POS 0 #define X_MAX_POS DELTA_PRINTABLE_RADIUS #define Y_MAX_POS DELTA_PRINTABLE_RADIUS -#define Z_MAX_POS MANUAL_Z_HOME_POS +#define Z_MAX_POS DELTA_HEIGHT /** * Software Endstops @@ -1368,7 +1370,7 @@ #endif #if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS) - //#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD + #define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD #endif /** @@ -1384,9 +1386,9 @@ * RAMPS-based boards use SERVO3_PIN for the first runout sensor. * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. */ -//#define FILAMENT_RUNOUT_SENSOR +#define FILAMENT_RUNOUT_SENSOR #if ENABLED(FILAMENT_RUNOUT_SENSOR) - #define FIL_RUNOUT_ENABLED_DEFAULT true // Enable the sensor on startup. Override with M412 followed by M500. + #define FIL_RUNOUT_ENABLED_DEFAULT false // Enable the sensor on startup. Override with M412 followed by M500. #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. #define FIL_RUNOUT_STATE LOW // Pin state indicating that filament is NOT present. @@ -1487,7 +1489,7 @@ //#define AUTO_BED_LEVELING_3POINT //#define AUTO_BED_LEVELING_LINEAR //#define AUTO_BED_LEVELING_BILINEAR -//#define AUTO_BED_LEVELING_UBL +#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING /** @@ -1495,7 +1497,7 @@ * these options to restore the prior leveling state or to always enable * leveling immediately after G28. */ -//#define RESTORE_LEVELING_AFTER_G28 +#define RESTORE_LEVELING_AFTER_G28 // for UBL //#define ENABLE_LEVELING_AFTER_G28 /** @@ -1523,7 +1525,7 @@ // Gradually reduce leveling correction until a set height is reached, // at which point movement will be level to the machine's XY plane. // The height can be set with M420 Z - //#define ENABLE_LEVELING_FADE_HEIGHT + #define ENABLE_LEVELING_FADE_HEIGHT #if ENABLED(ENABLE_LEVELING_FADE_HEIGHT) #define DEFAULT_LEVELING_FADE_HEIGHT 10.0 // (mm) Default fade height. #endif @@ -1586,8 +1588,8 @@ //#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh - #define MESH_INSET 1 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. + #define MESH_INSET 15 // Set Mesh bounds as an inset region of the bed + #define GRID_MAX_POINTS_X 8 // Don't use more than 15 points per axis, implementation limited. #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X //#define UBL_HILBERT_CURVE // Use Hilbert distribution for less travel when probing multiple points @@ -1665,7 +1667,7 @@ * Commands to execute at the end of G29 probing. * Useful to retract or move the Z probe out of the way. */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" +#define Z_PROBE_END_SCRIPT "G28" // @section homing @@ -1695,7 +1697,7 @@ #endif // Delta only homes to Z -#define HOMING_FEEDRATE_MM_M { (200*60), (200*60), (200*60) } +#define HOMING_FEEDRATE_MM_M { (70*60), (70*60), (70*60) } // Validate that endstops are triggered on homing moves #define VALIDATE_HOMING_ENDSTOPS @@ -1772,7 +1774,7 @@ * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) */ -//#define EEPROM_SETTINGS // Persistent storage with M500 and M501 +#define EEPROM_SETTINGS // Persistent storage with M500 and M501 //#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. #define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load @@ -1806,16 +1808,28 @@ // Preheat Constants - Up to 5 are supported without changes // #define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 180 -#define PREHEAT_1_TEMP_BED 70 +#define PREHEAT_1_TEMP_HOTEND 200 +#define PREHEAT_1_TEMP_BED 60 #define PREHEAT_1_TEMP_CHAMBER 35 -#define PREHEAT_1_FAN_SPEED 255 // Value from 0 to 255 +#define PREHEAT_1_FAN_SPEED 200 // Value from 0 to 255 -#define PREHEAT_2_LABEL "ABS" -#define PREHEAT_2_TEMP_HOTEND 240 -#define PREHEAT_2_TEMP_BED 100 +#define PREHEAT_2_LABEL "TPU" +#define PREHEAT_2_TEMP_HOTEND 230 +#define PREHEAT_2_TEMP_BED 50 #define PREHEAT_2_TEMP_CHAMBER 35 -#define PREHEAT_2_FAN_SPEED 255 // Value from 0 to 255 +#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 + +#define PREHEAT_3_LABEL "PETG" +#define PREHEAT_3_TEMP_HOTEND 240 +#define PREHEAT_3_TEMP_BED 80 +#define PREHEAT_3_TEMP_CHAMBER 35 +#define PREHEAT_3_FAN_SPEED 0 // Value from 0 to 255 + +#define PREHEAT_4_LABEL "ABS" +#define PREHEAT_4_TEMP_HOTEND 250 +#define PREHEAT_4_TEMP_BED 90 +#define PREHEAT_4_TEMP_CHAMBER 35 +#define PREHEAT_4_FAN_SPEED 0 // Value from 0 to 255 /** * Nozzle Park @@ -1828,16 +1842,16 @@ * P1 Raise the nozzle always to Z-park height. * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. */ -//#define NOZZLE_PARK_FEATURE +#define NOZZLE_PARK_FEATURE #if ENABLED(NOZZLE_PARK_FEATURE) // Specify a park position as { X, Y, Z_raise } - #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), 0, 20 } + #define NOZZLE_PARK_POINT { 0, (Y_MAX_POS - 10), 50 } //#define NOZZLE_PARK_X_ONLY // X move only is required to park //#define NOZZLE_PARK_Y_ONLY // Y move only is required to park #define NOZZLE_PARK_Z_RAISE_MIN 2 // (mm) Always raise Z by at least this distance #define NOZZLE_PARK_XY_FEEDRATE 100 // (mm/s) X and Y axes feedrate (also used for delta Z axis) - #define NOZZLE_PARK_Z_FEEDRATE 5 // (mm/s) Z axis feedrate (not used for delta printers) + #define NOZZLE_PARK_Z_FEEDRATE 100 // (mm/s) Z axis feedrate (not used for delta printers) #endif /** @@ -2021,7 +2035,7 @@ * * :['JAPANESE', 'WESTERN', 'CYRILLIC'] */ -#define DISPLAY_CHARSET_HD44780 JAPANESE +#define DISPLAY_CHARSET_HD44780 WESTERN /** * Info Screen Style (0:Classic, 1:Průša) @@ -2036,7 +2050,7 @@ * SD Card support is disabled by default. If your controller has an SD slot, * you must uncomment the following option or it won't work. */ -//#define SDSUPPORT +#define SDSUPPORT /** * SD CARD: ENABLE CRC @@ -2566,7 +2580,7 @@ // 320x240, 3.2", FSMC Display From MKS // Normally used in MKS Robin Nano V1.2 // -//#define MKS_ROBIN_TFT32 +#define MKS_ROBIN_TFT32 // // 480x320, 3.5", FSMC Display From MKS @@ -2644,7 +2658,7 @@ * root of your SD card, together with the compiled firmware. */ //#define TFT_CLASSIC_UI -//#define TFT_COLOR_UI +#define TFT_COLOR_UI //#define TFT_LVGL_UI #if ENABLED(TFT_LVGL_UI) @@ -2673,17 +2687,18 @@ // // Touch Screen Settings // -//#define TOUCH_SCREEN +#define TOUCH_SCREEN #if ENABLED(TOUCH_SCREEN) #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus #define TOUCH_SCREEN_CALIBRATION - //#define TOUCH_CALIBRATION_X 12316 - //#define TOUCH_CALIBRATION_Y -8981 - //#define TOUCH_OFFSET_X -43 - //#define TOUCH_OFFSET_Y 257 + // QQS-Pro use MKS Robin TFT v2.0 + #define TOUCH_CALIBRATION_X 12033 + #define TOUCH_CALIBRATION_Y -9047 + #define TOUCH_OFFSET_X -30 + #define TOUCH_OFFSET_Y 254 //#define TOUCH_ORIENTATION TOUCH_LANDSCAPE #if BOTH(TOUCH_SCREEN_CALIBRATION, EEPROM_SETTINGS) @@ -2718,14 +2733,14 @@ // Use software PWM to drive the fan, as for the heaters. This uses a very low frequency // which is not as annoying as with the hardware PWM. On the other hand, if this frequency // is too low, you should also increment SOFT_PWM_SCALE. -//#define FAN_SOFT_PWM +#define FAN_SOFT_PWM // Incrementing this by 1 will double the software PWM frequency, // affecting heaters, and the fan if FAN_SOFT_PWM is enabled. // However, control resolution will be halved for each increment; // at zero value, there are 128 effective control positions. // :[0,1,2,3,4,5,6,7] -#define SOFT_PWM_SCALE 0 +#define SOFT_PWM_SCALE 1 // If SOFT_PWM_SCALE is set to a value higher than 0, dithering can // be used to mitigate the associated resolution loss. If enabled, @@ -2784,14 +2799,14 @@ // Support for Adafruit NeoPixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - #define NEOPIXEL_PIN 4 // LED driving pin + #define NEOPIXEL_TYPE NEO_GRB // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + #define NEOPIXEL_PIN LED_PWM // LED driving pin //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + //#define NEOPIXEL2_PIN 5 + #define NEOPIXEL_PIXELS 12 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 255 // Initial brightness (0-255) + #define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... //#define NEOPIXEL2_SEPARATE diff --git a/config/examples/delta/FLSUN/QQS-Pro/Configuration_adv.h b/config/examples/delta/FLSUN/QQS-Pro/Configuration_adv.h index aa6bbae7e4..d28dc2429f 100644 --- a/config/examples/delta/FLSUN/QQS-Pro/Configuration_adv.h +++ b/config/examples/delta/FLSUN/QQS-Pro/Configuration_adv.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "delta/FLSUN/QQS-Pro" + /** * Configuration_adv.h * @@ -239,7 +241,7 @@ */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_HYSTERESIS 6 // Degrees Celsius //#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops #if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP) @@ -926,10 +928,10 @@ * Set DISABLE_INACTIVE_? 'true' to shut down axis steppers after an idle period. * The Deactive Time can be overridden with M18 and M84. Set to 0 for No Timeout. */ -#define DEFAULT_STEPPER_DEACTIVE_TIME 60 +#define DEFAULT_STEPPER_DEACTIVE_TIME (2*60) #define DISABLE_INACTIVE_X true #define DISABLE_INACTIVE_Y true -#define DISABLE_INACTIVE_Z true // Set 'false' if the nozzle could fall onto your printed part! +#define DISABLE_INACTIVE_Z false // Set 'false' if the nozzle could fall onto your printed part! #define DISABLE_INACTIVE_E true // Default Minimum Feedrates for printing and travel moves @@ -941,6 +943,7 @@ // Slow down the machine if the lookahead buffer is (by default) half full. // Increase the slowdown divisor for larger buffer sizes. +// (don't use SLOWDOWN with DELTA because DELTA generates hundreds of segments per second) //#define SLOWDOWN #if ENABLED(SLOWDOWN) #define SLOWDOWN_DIVISOR 2 @@ -1162,14 +1165,14 @@ // Add Probe Z Offset calibration to the Z Probe Offsets menu #if HAS_BED_PROBE - //#define PROBE_OFFSET_WIZARD + #define PROBE_OFFSET_WIZARD #if ENABLED(PROBE_OFFSET_WIZARD) // // Enable to init the Probe Z-Offset when starting the Wizard. // Use a height slightly above the estimated nozzle-to-probe Z offset. // For example, with an offset of -5, consider a starting height of -4. // - //#define PROBE_OFFSET_WIZARD_START_Z -4.0 + #define PROBE_OFFSET_WIZARD_START_Z -15.2 // Set a convenient position to do the calibration (probing point and nozzle/bed-distance) //#define PROBE_OFFSET_WIZARD_XY_POS { X_CENTER, Y_CENTER } @@ -1177,7 +1180,7 @@ #endif // Include a page of printer information in the LCD Main Menu - //#define LCD_INFO_MENU + #define LCD_INFO_MENU #if ENABLED(LCD_INFO_MENU) //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages #endif @@ -1202,7 +1205,7 @@ #define LED_USER_PRESET_BLUE 0 // User defined BLUE value #define LED_USER_PRESET_WHITE 255 // User defined WHITE value #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity - //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup + #define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup #endif #if ENABLED(NEO2_COLOR_PRESETS) #define NEO2_USER_PRESET_RED 255 // User defined RED value @@ -1221,33 +1224,33 @@ #if HAS_DISPLAY // The timeout (in ms) to return to the status screen from sub-menus - //#define LCD_TIMEOUT_TO_STATUS 15000 + #define LCD_TIMEOUT_TO_STATUS 15000 #if ENABLED(SHOW_BOOTSCREEN) #define BOOTSCREEN_TIMEOUT 4000 // (ms) Total Duration to display the boot screen(s) #if EITHER(HAS_MARLINUI_U8GLIB, TFT_COLOR_UI) - #define BOOT_MARLIN_LOGO_SMALL // Show a smaller Marlin logo on the Boot Screen (saving lots of flash) + //#define BOOT_MARLIN_LOGO_SMALL // Show a smaller Marlin logo on the Boot Screen (saving lots of flash) #endif #endif // Scroll a longer status message into view - //#define STATUS_MESSAGE_SCROLLING + #define STATUS_MESSAGE_SCROLLING // On the Info Screen, display XY with one decimal place when possible //#define LCD_DECIMAL_SMALL_XY // Add an 'M73' G-code to set the current percentage - //#define LCD_SET_PROGRESS_MANUALLY + #define LCD_SET_PROGRESS_MANUALLY // Show the E position (filament used) during printing //#define LCD_SHOW_E_TOTAL #endif #if EITHER(SDSUPPORT, LCD_SET_PROGRESS_MANUALLY) && ANY(HAS_MARLINUI_U8GLIB, HAS_MARLINUI_HD44780, IS_TFTGLCD_PANEL, EXTENSIBLE_UI) - //#define SHOW_REMAINING_TIME // Display estimated time to completion + #define SHOW_REMAINING_TIME // Display estimated time to completion #if ENABLED(SHOW_REMAINING_TIME) - //#define USE_M73_REMAINING_TIME // Use remaining time from M73 command instead of estimation - //#define ROTATE_PROGRESS_DISPLAY // Display (P)rogress, (E)lapsed, and (R)emaining time + #define USE_M73_REMAINING_TIME // Use remaining time from M73 command instead of estimation + #define ROTATE_PROGRESS_DISPLAY // Display (P)rogress, (E)lapsed, and (R)emaining time #endif #if EITHER(HAS_MARLINUI_U8GLIB, EXTENSIBLE_UI) @@ -1290,7 +1293,7 @@ #define SD_PROCEDURE_DEPTH 1 // Increase if you need more nested M32 calls #define SD_FINISHED_STEPPERRELEASE true // Disable steppers when SD Print is finished - #define SD_FINISHED_RELEASECOMMAND "M84" // Use "M84XYE" to keep Z enabled so your bed stays in place + #define SD_FINISHED_RELEASECOMMAND "M84XYE" // Use "M84XYE" to keep Z enabled so your bed stays in place // Reverse SD sort to show "more recent" files first, according to the card's FAT. // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended. @@ -1317,12 +1320,12 @@ * an option on the LCD screen to continue the print from the last-known * point in the file. */ - //#define POWER_LOSS_RECOVERY + #define POWER_LOSS_RECOVERY #if ENABLED(POWER_LOSS_RECOVERY) - #define PLR_ENABLED_DEFAULT false // Power Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) + #define PLR_ENABLED_DEFAULT false // Power Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) //#define BACKUP_POWER_SUPPLY // Backup power / UPS to move the steppers on power loss //#define POWER_LOSS_ZRAISE 2 // (mm) Z axis raise on resume (on power loss with UPS) - //#define POWER_LOSS_PIN 44 // Pin to detect power loss. Set to -1 to disable default pin on boards without module. + #define POWER_LOSS_PIN -1 // Pin to detect power loss. Set to -1 to disable default pin on boards without module. //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss //#define POWER_LOSS_PULLUP // Set pullup / pulldown as appropriate for your sensor //#define POWER_LOSS_PULLDOWN @@ -1383,10 +1386,10 @@ //#define UTF_FILENAME_SUPPORT // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT + #define LONG_FILENAME_HOST_SUPPORT // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES + #define SCROLL_LONG_FILENAMES // Leave the heaters on after Stop Print (not recommended!) //#define SD_ABORT_NO_COOLDOWN @@ -1529,7 +1532,7 @@ // A smaller font may be used on the Info Screen. Costs 2434 bytes of PROGMEM. // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. - //#define USE_SMALL_INFOFONT + #define USE_SMALL_INFOFONT // Swap the CW/CCW indicators in the graphics overlay //#define OVERLAY_GFX_REVERSE @@ -1567,13 +1570,13 @@ #define STATUS_HOTEND_INVERTED // Show solid nozzle bitmaps when heating (Requires STATUS_HOTEND_ANIM) #define STATUS_HOTEND_ANIM // Use a second bitmap to indicate hotend heating #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating - #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating + //#define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating //#define STATUS_CUTTER_ANIM // Use a second bitmap to indicate spindle / laser active //#define STATUS_COOLER_ANIM // Use a second bitmap to indicate laser cooling //#define STATUS_FLOWMETER_ANIM // Use multiple bitmaps to indicate coolant flow - //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap - //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap - //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames + #define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap + #define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap + #define STATUS_FAN_FRAMES 4 // :[0,1,2,3,4] Number of fan animation frames //#define STATUS_HEAT_PERCENT // Show heating in a progress bar //#define BOOT_MARLIN_LOGO_ANIMATED // Animated Marlin logo. Costs ~‭3260 (or ~940) bytes of PROGMEM. @@ -1651,12 +1654,12 @@ // Specify additional languages for the UI. Default specified by LCD_LANGUAGE. // #if ANY(DOGLCD, TFT_COLOR_UI, TOUCH_UI_FTDI_EVE) - //#define LCD_LANGUAGE_2 fr - //#define LCD_LANGUAGE_3 de - //#define LCD_LANGUAGE_4 es - //#define LCD_LANGUAGE_5 it + #define LCD_LANGUAGE_2 fr + #define LCD_LANGUAGE_3 de + #define LCD_LANGUAGE_4 es + #define LCD_LANGUAGE_5 it #ifdef LCD_LANGUAGE_2 - //#define LCD_LANGUAGE_AUTO_SAVE // Automatically save language to EEPROM on change + #define LCD_LANGUAGE_AUTO_SAVE // Automatically save language to EEPROM on change #endif #endif @@ -1792,18 +1795,18 @@ * * Warning: Does not respect endstops! */ -//#define BABYSTEPPING +#define BABYSTEPPING #if ENABLED(BABYSTEPPING) //#define INTEGRATED_BABYSTEPPING // EXPERIMENTAL integration of babystepping into the Stepper ISR //#define BABYSTEP_WITHOUT_HOMING - //#define BABYSTEP_ALWAYS_AVAILABLE // Allow babystepping at all times (not just during movement). + #define BABYSTEP_ALWAYS_AVAILABLE // Allow babystepping at all times (not just during movement). //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way //#define BABYSTEP_MILLIMETER_UNITS // Specify BABYSTEP_MULTIPLICATOR_(XY|Z) in mm instead of micro-steps #define BABYSTEP_MULTIPLICATOR_Z 1 // (steps or mm) Steps or millimeter distance for each Z babystep - #define BABYSTEP_MULTIPLICATOR_XY 1 // (steps or mm) Steps or millimeter distance for each XY babystep + //#define BABYSTEP_MULTIPLICATOR_XY 1 // (steps or mm) Steps or millimeter distance for each XY babystep - //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. + #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. // Note: Extra time may be added to mitigate controller latency. @@ -1815,7 +1818,7 @@ //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 - //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping + #define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping #if ENABLED(BABYSTEP_ZPROBE_OFFSET) //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets //#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor @@ -1844,7 +1847,7 @@ //#define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // If enabled, this will generate debug information output over USB. - //#define EXPERIMENTAL_SCURVE // Enable this option to permit S-Curve Acceleration + #define EXPERIMENTAL_SCURVE // Enable this option to permit S-Curve Acceleration #endif // @section leveling @@ -1984,7 +1987,7 @@ // // G2/G3 Arc Support // -#define ARC_SUPPORT // Disable this feature to save ~3226 bytes +#define ARC_SUPPORT // Disable this feature to save ~3226 bytes #if ENABLED(ARC_SUPPORT) #define MM_PER_ARC_SEGMENT 1 // (mm) Length (or minimum length) of each arc segment //#define ARC_SEGMENTS_PER_R 1 // Max segment length, MM_PER = Min @@ -2038,8 +2041,8 @@ * * Override the default value based on the driver type set in Configuration.h. */ -//#define MINIMUM_STEPPER_POST_DIR_DELAY 650 -//#define MINIMUM_STEPPER_PRE_DIR_DELAY 650 +//#define MINIMUM_STEPPER_POST_DIR_DELAY 200 +//#define MINIMUM_STEPPER_PRE_DIR_DELAY 200 /** * Minimum stepper driver pulse width (in µs) @@ -2093,7 +2096,7 @@ // The ASCII buffer for serial input #define MAX_CMD_SIZE 96 -#define BUFSIZE 4 +#define BUFSIZE 16 // Transmission to Host Buffer Size // To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0. @@ -2102,7 +2105,7 @@ // For debug-echo: 128 bytes for the optimal speed. // Other output doesn't need to be that speedy. // :[0, 2, 4, 8, 16, 32, 64, 128, 256] -#define TX_BUFFER_SIZE 0 +#define TX_BUFFER_SIZE 16 // Host Receive Buffer Size // Without XON/XOFF flow control (see SERIAL_XON_XOFF below) 32 bytes should be enough. @@ -2313,23 +2316,23 @@ * * Enable PARK_HEAD_ON_PAUSE to add the G-code M125 Pause and Park. */ -//#define ADVANCED_PAUSE_FEATURE +#define ADVANCED_PAUSE_FEATURE #if ENABLED(ADVANCED_PAUSE_FEATURE) #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. - #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. + #define PAUSE_PARK_RETRACT_LENGTH 3 // (mm) Initial retract. // This short retract is done immediately, before parking the nozzle. - #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast. - #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload. + #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 20 // (mm/s) Unload filament feedrate. This can be pretty fast. + #define FILAMENT_CHANGE_UNLOAD_ACCEL 30 // (mm/s^2) Lower acceleration may allow a faster feedrate. + #define FILAMENT_CHANGE_UNLOAD_LENGTH 850 // (mm) The length of filament for a complete unload. // For Bowden, the full length of the tube and nozzle. // For direct drive, the full length of the nozzle. // Set to 0 for manual unloading. #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE 6 // (mm/s) Slow move when starting load. #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 0 // (mm) Slow length, to allow time to insert material. // 0 to disable start loading and skip to fast load only - #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast. - #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle. + #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 20 // (mm/s) Load filament feedrate. This can be pretty fast. + #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 30 // (mm/s^2) Lower acceleration may allow a faster feedrate. + #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 730 // (mm) Load length of filament, from extruder gear to nozzle. // For Bowden, the full length of the tube and nozzle. // For direct drive, the full length of the nozzle. //#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted. @@ -2351,10 +2354,10 @@ #define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed. #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change. - //#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. + #define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. //#define HOME_BEFORE_FILAMENT_CHANGE // If needed, home before parking for filament change - //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. + #define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) #endif @@ -2495,7 +2498,7 @@ #define INTERPOLATE true #if AXIS_IS_TMC(X) - #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. + #define X_CURRENT 900 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for sensorless homing #define X_MICROSTEPS 16 // 0..256 #define X_RSENSE 0.11 @@ -2513,7 +2516,7 @@ #endif #if AXIS_IS_TMC(Y) - #define Y_CURRENT 800 + #define Y_CURRENT 900 #define Y_CURRENT_HOME Y_CURRENT #define Y_MICROSTEPS 16 #define Y_RSENSE 0.11 @@ -2531,7 +2534,7 @@ #endif #if AXIS_IS_TMC(Z) - #define Z_CURRENT 800 + #define Z_CURRENT 900 #define Z_CURRENT_HOME Z_CURRENT #define Z_MICROSTEPS 16 #define Z_RSENSE 0.11 @@ -2567,7 +2570,7 @@ #endif #if AXIS_IS_TMC(E0) - #define E0_CURRENT 800 + #define E0_CURRENT 850 #define E0_MICROSTEPS 16 #define E0_RSENSE 0.11 #define E0_CHAIN_POS -1 @@ -2704,7 +2707,7 @@ */ #define STEALTHCHOP_XY #define STEALTHCHOP_Z - #define STEALTHCHOP_E + //#define STEALTHCHOP_E /** * Optimize spreadCycle chopper parameters by using predefined parameter sets @@ -2721,7 +2724,7 @@ * Define your own with: * { , , hysteresis_start[1..8] } */ - #define CHOPPER_TIMING CHOPPER_DEFAULT_12V // All axes (override below) + #define CHOPPER_TIMING CHOPPER_DEFAULT_24V // All axes (override below) //#define CHOPPER_TIMING_X CHOPPER_TIMING // For X Axes (override below) //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X //#define CHOPPER_TIMING_Y CHOPPER_TIMING // For Y Axes (override below) @@ -2765,17 +2768,17 @@ * STEALTHCHOP_(XY|Z|E) must be enabled to use HYBRID_THRESHOLD. * M913 X/Y/Z/E to live tune the setting */ - //#define HYBRID_THRESHOLD + #define HYBRID_THRESHOLD - #define X_HYBRID_THRESHOLD 100 // [mm/s] + #define X_HYBRID_THRESHOLD 150 // [mm/s] #define X2_HYBRID_THRESHOLD 100 - #define Y_HYBRID_THRESHOLD 100 + #define Y_HYBRID_THRESHOLD 150 #define Y2_HYBRID_THRESHOLD 100 - #define Z_HYBRID_THRESHOLD 3 + #define Z_HYBRID_THRESHOLD 150 #define Z2_HYBRID_THRESHOLD 3 #define Z3_HYBRID_THRESHOLD 3 #define Z4_HYBRID_THRESHOLD 3 - #define E0_HYBRID_THRESHOLD 30 + #define E0_HYBRID_THRESHOLD 50 #define E1_HYBRID_THRESHOLD 30 #define E2_HYBRID_THRESHOLD 30 #define E3_HYBRID_THRESHOLD 30 @@ -2817,7 +2820,7 @@ #define X2_STALL_SENSITIVITY X_STALL_SENSITIVITY #define Y_STALL_SENSITIVITY 8 #define Y2_STALL_SENSITIVITY Y_STALL_SENSITIVITY - //#define Z_STALL_SENSITIVITY 8 + #define Z_STALL_SENSITIVITY 8 //#define Z2_STALL_SENSITIVITY Z_STALL_SENSITIVITY //#define Z3_STALL_SENSITIVITY Z_STALL_SENSITIVITY //#define Z4_STALL_SENSITIVITY Z_STALL_SENSITIVITY @@ -2835,13 +2838,13 @@ * * Values from 0..1023, -1 to disable homing phase for that axis. */ - //#define TMC_HOME_PHASE { 896, 896, 896 } + //#define TMC_HOME_PHASE { 896, 896, 896 } /** * Beta feature! * Create a 50/50 square wave step pulse optimal for stepper drivers. */ - //#define SQUARE_WAVE_STEPPING + #define SQUARE_WAVE_STEPPING /** * Enable M122 debugging command for TMC stepper drivers. @@ -3428,7 +3431,7 @@ */ #define EXTENDED_CAPABILITIES_REPORT #if ENABLED(EXTENDED_CAPABILITIES_REPORT) - //#define M115_GEOMETRY_REPORT + #define M115_GEOMETRY_REPORT #endif /** @@ -3654,7 +3657,7 @@ */ //#define HOST_ACTION_COMMANDS #if ENABLED(HOST_ACTION_COMMANDS) - //#define HOST_PROMPT_SUPPORT + #define HOST_PROMPT_SUPPORT //#define HOST_START_MENU_ITEM // Add a menu item that tells the host to start #endif diff --git a/config/examples/delta/FLSUN/auto_calibrate/Configuration.h b/config/examples/delta/FLSUN/auto_calibrate/Configuration.h index 464282b015..bd9d84aa1d 100644 --- a/config/examples/delta/FLSUN/auto_calibrate/Configuration.h +++ b/config/examples/delta/FLSUN/auto_calibrate/Configuration.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "delta/FLSUN/auto_calibrate" + /** * Configuration.h * @@ -69,7 +71,7 @@ // @section info // Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes. +#define STRING_CONFIG_H_AUTHOR "(LVD, FLSUN-AC)" // Who made the changes. //#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) /** @@ -134,11 +136,11 @@ // Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_RAMPS_14_EFB + #define MOTHERBOARD BOARD_RAMPS_13_EFB #endif // Name displayed in the LCD "Ready" message and Info menu -#define CUSTOM_MACHINE_NAME "Deltabot" +#define CUSTOM_MACHINE_NAME "FLSUN Kossel" // Printer's unique ID, used by some programs to differentiate between machines. // Choose your own or use a service like https://www.uuidgenerator.net/version4 @@ -318,7 +320,7 @@ * Enable and connect the power supply to the PS_ON_PIN. * Specify whether the power supply is active HIGH or active LOW. */ -#define PSU_CONTROL +//#define PSU_CONTROL //#define PSU_NAME "Power Supply" #if ENABLED(PSU_CONTROL) @@ -416,7 +418,7 @@ * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. */ -#define TEMP_SENSOR_0 -1 +#define TEMP_SENSOR_0 5 #define TEMP_SENSOR_1 0 #define TEMP_SENSOR_2 0 #define TEMP_SENSOR_3 0 @@ -424,7 +426,7 @@ #define TEMP_SENSOR_5 0 #define TEMP_SENSOR_6 0 #define TEMP_SENSOR_7 0 -#define TEMP_SENSOR_BED 0 +#define TEMP_SENSOR_BED 5 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 #define TEMP_SENSOR_COOLER 0 @@ -442,13 +444,13 @@ // Use temp sensor 1 as a redundant sensor with sensor 0. If the readings // from the two sensors differ too much the print will be aborted. //#define TEMP_SENSOR_1_AS_REDUNDANT -#define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10 +#define MAX_REDUNDANT_TEMP_SENSOR_DIFF 5 #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 #define TEMP_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer #define TEMP_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target -#define TEMP_BED_RESIDENCY_TIME 0 // (seconds) Time to wait for bed to "settle" in M190 +#define TEMP_BED_RESIDENCY_TIME 1 // (seconds) Time to wait for bed to "settle" in M190 #define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer #define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target @@ -472,15 +474,15 @@ // Above this temperature the heater will be switched off. // This can protect components from overheating, but NOT from shorts and failures. // (Use MINTEMP for thermistor short/failure protection.) -#define HEATER_0_MAXTEMP 275 -#define HEATER_1_MAXTEMP 275 -#define HEATER_2_MAXTEMP 275 -#define HEATER_3_MAXTEMP 275 -#define HEATER_4_MAXTEMP 275 -#define HEATER_5_MAXTEMP 275 -#define HEATER_6_MAXTEMP 275 -#define HEATER_7_MAXTEMP 275 -#define BED_MAXTEMP 150 +#define HEATER_0_MAXTEMP 250 +#define HEATER_1_MAXTEMP 250 +#define HEATER_2_MAXTEMP 250 +#define HEATER_3_MAXTEMP 250 +#define HEATER_4_MAXTEMP 250 +#define HEATER_5_MAXTEMP 250 +#define HEATER_6_MAXTEMP 250 +#define HEATER_7_MAXTEMP 250 +#define BED_MAXTEMP 115 #define CHAMBER_MAXTEMP 60 /** @@ -505,21 +507,22 @@ #define PID_K1 0.95 // Smoothing factor within any PID loop #if ENABLED(PIDTEMP) - //#define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) - //#define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) + #define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) + #define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) // Set/get with gcode: M301 E[extruder number, 0-2] + // E3D with 30MM fan #if ENABLED(PID_PARAMS_PER_HOTEND) // Specify between 1 and HOTENDS values per array. // If fewer than EXTRUDER values are provided, the last element will be repeated. - #define DEFAULT_Kp_LIST { 22.20, 22.20 } - #define DEFAULT_Ki_LIST { 1.08, 1.08 } - #define DEFAULT_Kd_LIST { 114.00, 114.00 } + #define DEFAULT_Kp_LIST { 24.77, 24.77 } + #define DEFAULT_Ki_LIST { 1.84, 1.84 } + #define DEFAULT_Kd_LIST { 83.61, 83.61 } #else - #define DEFAULT_Kp 22.20 - #define DEFAULT_Ki 1.08 - #define DEFAULT_Kd 114.00 + #define DEFAULT_Kp 24.77 + #define DEFAULT_Ki 1.84 + #define DEFAULT_Kd 83.61 #endif #endif // PIDTEMP @@ -556,11 +559,10 @@ //#define MIN_BED_POWER 0 //#define PID_BED_DEBUG // Sends debug data to the serial port. - // 120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - // from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) - #define DEFAULT_bedKp 10.00 - #define DEFAULT_bedKi .023 - #define DEFAULT_bedKd 305.4 + // D-force + #define DEFAULT_bedKp 22.97 + #define DEFAULT_bedKi 3.76 + #define DEFAULT_bedKd 29.2 // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. #endif // PIDTEMPBED @@ -634,7 +636,7 @@ * Note: For Bowden Extruders make this large enough to allow load/unload. */ #define PREVENT_LENGTHY_EXTRUDE -#define EXTRUDE_MAXLENGTH 200 +#define EXTRUDE_MAXLENGTH 300 //=========================================================================== //======================== Thermal Runaway Protection ======================= @@ -685,7 +687,7 @@ // Make delta curves from many straight lines (linear interpolation). // This is a trade-off between visible corners (not enough segments) // and processor overload (too many expensive sqrt calls). - #define DELTA_SEGMENTS_PER_SECOND 200 + #define DELTA_SEGMENTS_PER_SECOND 160 // After homing move down to a height where XY movement is unconstrained //#define DELTA_HOME_TO_SAFE_ZONE @@ -696,7 +698,7 @@ //#define DELTA_CALIBRATION_MENU // uncomment to add G33 Delta Auto-Calibration (Enable EEPROM_SETTINGS to store results) - //#define DELTA_AUTO_CALIBRATION + #define DELTA_AUTO_CALIBRATION // NOTE NB all values for DELTA_* values MUST be floating point, so always have a decimal point in them @@ -711,18 +713,18 @@ #endif // Print surface diameter/2 minus unreachable space (avoid collisions with vertical towers). - #define DELTA_PRINTABLE_RADIUS 140.0 // (mm) + #define DELTA_PRINTABLE_RADIUS 85.0 // (mm) // Center-to-center distance of the holes in the diagonal push rods. - #define DELTA_DIAGONAL_ROD 250.0 // (mm) + #define DELTA_DIAGONAL_ROD 218.0 // (mm) // Distance between bed and nozzle Z home position - #define DELTA_HEIGHT 250.00 // (mm) Get this value from G33 auto calibrate + #define DELTA_HEIGHT 295.00 // (mm) Get this value from G33 auto calibrate #define DELTA_ENDSTOP_ADJ { 0.0, 0.0, 0.0 } // Get these values from G33 auto calibrate // Horizontal distance bridged by diagonal push rods when effector is centered. - #define DELTA_RADIUS 124.0 // (mm) Get this value from G33 auto calibrate + #define DELTA_RADIUS 101.0 // (mm) Get this value from G33 auto calibrate // Trim adjustments for individual towers // tower angle corrections for X and Y tower / rotate XYZ so Z tower angle = 0 @@ -746,7 +748,7 @@ // extra connectors. Leave undefined any used for non-endstop and non-probe purposes. //#define USE_XMIN_PLUG //#define USE_YMIN_PLUG -#define USE_ZMIN_PLUG // a Z probe +#define USE_ZMIN_PLUG #define USE_XMAX_PLUG #define USE_YMAX_PLUG #define USE_ZMAX_PLUG @@ -778,12 +780,12 @@ #endif // Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define X_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. +#define Y_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. #define Z_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define X_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Y_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Z_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define X_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. +#define Y_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. +#define Z_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. #define Z_MIN_PROBE_ENDSTOP_INVERTING true // Set to true to invert the logic of the probe. /** @@ -872,18 +874,18 @@ #define XYZ_FULL_STEPS_PER_ROTATION 200 #define XYZ_MICROSTEPS 16 #define XYZ_BELT_PITCH 2 -#define XYZ_PULLEY_TEETH 20 +#define XYZ_PULLEY_TEETH 16 // delta speeds must be the same on xyz #define DEFAULT_XYZ_STEPS_PER_UNIT ((XYZ_FULL_STEPS_PER_ROTATION) * (XYZ_MICROSTEPS) / double(XYZ_BELT_PITCH) / double(XYZ_PULLEY_TEETH)) -#define DEFAULT_AXIS_STEPS_PER_UNIT { DEFAULT_XYZ_STEPS_PER_UNIT, DEFAULT_XYZ_STEPS_PER_UNIT, DEFAULT_XYZ_STEPS_PER_UNIT, 760*1.1 } // default steps per unit for Kossel (GT2, 20 tooth) +#define DEFAULT_AXIS_STEPS_PER_UNIT { DEFAULT_XYZ_STEPS_PER_UNIT, DEFAULT_XYZ_STEPS_PER_UNIT, DEFAULT_XYZ_STEPS_PER_UNIT, 100 } // default steps per unit for Kossel (GT2, 20 tooth) /** * Default Max Feed Rate (mm/s) * Override with M203 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_FEEDRATE { 500, 500, 500, 25 } +#define DEFAULT_MAX_FEEDRATE { 200, 200, 200, 25 } //#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 #if ENABLED(LIMITED_MAX_FR_EDITING) @@ -896,7 +898,7 @@ * Override with M201 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_ACCELERATION { 9000, 9000, 9000, 10000 } +#define DEFAULT_MAX_ACCELERATION { 4000, 4000, 4000, 4000 } //#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 #if ENABLED(LIMITED_MAX_ACCEL_EDITING) @@ -1016,7 +1018,7 @@ * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. * (e.g., an inductive probe or a nozzle-based probe-switch.) */ -//#define FIX_MOUNTED_PROBE +#define FIX_MOUNTED_PROBE /** * Use the nozzle as the probe, as with a conductive @@ -1091,6 +1093,7 @@ // 2 or 3 sets of coordinates for deploying and retracting the spring loaded touch probe on G29, // if servo actuated touch probe is not defined. Uncomment as appropriate for your printer/probe. + // Kossel Mini #define Z_PROBE_ALLEN_KEY_DEPLOY_1 { 30.0, DELTA_PRINTABLE_RADIUS, 100.0 } #define Z_PROBE_ALLEN_KEY_DEPLOY_1_FEEDRATE XY_PROBE_FEEDRATE @@ -1100,16 +1103,18 @@ #define Z_PROBE_ALLEN_KEY_DEPLOY_3 { 0.0, (DELTA_PRINTABLE_RADIUS) * 0.75, 100.0 } #define Z_PROBE_ALLEN_KEY_DEPLOY_3_FEEDRATE XY_PROBE_FEEDRATE - #define Z_PROBE_ALLEN_KEY_STOW_1 { -64.0, 56.0, 23.0 } // Move the probe into position + #define Z_PROBE_ALLEN_KEY_STOW_DEPTH 20 + // Move the probe into position + #define Z_PROBE_ALLEN_KEY_STOW_1 { -64.0, 56.0, 23.0 } #define Z_PROBE_ALLEN_KEY_STOW_1_FEEDRATE XY_PROBE_FEEDRATE - - #define Z_PROBE_ALLEN_KEY_STOW_2 { -64.0, 56.0, 3.0 } // Push it down + // Move the nozzle down further to push the probe into retracted position. + #define Z_PROBE_ALLEN_KEY_STOW_2 { -64.0, 56.0, 23.0-(Z_PROBE_ALLEN_KEY_STOW_DEPTH) } #define Z_PROBE_ALLEN_KEY_STOW_2_FEEDRATE (XY_PROBE_FEEDRATE)/10 + // Raise things back up slightly so we don't bump into anything + #define Z_PROBE_ALLEN_KEY_STOW_3 { -64.0, 56.0, 23.0+(Z_PROBE_ALLEN_KEY_STOW_DEPTH) } + #define Z_PROBE_ALLEN_KEY_STOW_3_FEEDRATE (XY_PROBE_FEEDRATE)/2 - #define Z_PROBE_ALLEN_KEY_STOW_3 { -64.0, 56.0, 50.0 } // Move it up to clear - #define Z_PROBE_ALLEN_KEY_STOW_3_FEEDRATE XY_PROBE_FEEDRATE - - #define Z_PROBE_ALLEN_KEY_STOW_4 { 0.0, 0.0, 50.0 } + #define Z_PROBE_ALLEN_KEY_STOW_4 { 0.0, 0.0, 23.0+(Z_PROBE_ALLEN_KEY_STOW_DEPTH) } #define Z_PROBE_ALLEN_KEY_STOW_4_FEEDRATE XY_PROBE_FEEDRATE #endif // Z_PROBE_ALLEN_KEY @@ -1154,20 +1159,20 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 0, -10, -3.5 } +#define NOZZLE_TO_PROBE_OFFSET { 0, 0, 0.10 } // Most probes should stay away from the edges of the bed, but // with NOZZLE_AS_PROBE this can be negative for a wider probing area. -#define PROBING_MARGIN 10 +#define PROBING_MARGIN 20 // X and Y axis travel speed (mm/min) between probes -#define XY_PROBE_FEEDRATE (66*60) +#define XY_PROBE_FEEDRATE (83*60) // Feedrate (mm/min) for the first approach when double-probing (MULTIPLE_PROBING == 2) -#define Z_PROBE_FEEDRATE_FAST (200*60) +#define Z_PROBE_FEEDRATE_FAST (100*60) // Feedrate (mm/min) for the "accurate" probe of each point -#define Z_PROBE_FEEDRATE_SLOW (Z_PROBE_FEEDRATE_FAST / 2) +#define Z_PROBE_FEEDRATE_SLOW (Z_PROBE_FEEDRATE_FAST) / 6 /** * Probe Activation Switch @@ -1222,10 +1227,10 @@ * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. */ -#define Z_CLEARANCE_DEPLOY_PROBE 15 // Z Clearance for Deploy/Stow -#define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points +#define Z_CLEARANCE_DEPLOY_PROBE 5 // Z Clearance for Deploy/Stow +#define Z_CLEARANCE_BETWEEN_PROBES 2 // Z Clearance between probe points #define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes -//#define Z_AFTER_PROBING 5 // Z position after probing is done +//#define Z_AFTER_PROBING 2 // Z position after probing is done #define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping @@ -1289,9 +1294,9 @@ // @section machine // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR false -#define INVERT_Y_DIR false -#define INVERT_Z_DIR false +#define INVERT_X_DIR true +#define INVERT_Y_DIR true +#define INVERT_Z_DIR true // @section extruder @@ -1317,7 +1322,7 @@ */ //#define Z_IDLE_HEIGHT Z_HOME_POS -//#define Z_HOMING_HEIGHT 4 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ... +#define Z_HOMING_HEIGHT 15 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ... // Be sure to have this much clearance over your Z_MAX_POS to prevent grinding. //#define Z_AFTER_HOMING 10 // (mm) Height to move to after homing Z @@ -1352,7 +1357,7 @@ */ // Min software endstops constrain movement within minimum coordinate bounds -#define MIN_SOFTWARE_ENDSTOPS +//#define MIN_SOFTWARE_ENDSTOPS #if ENABLED(MIN_SOFTWARE_ENDSTOPS) #define MIN_SOFTWARE_ENDSTOP_X #define MIN_SOFTWARE_ENDSTOP_Y @@ -1554,7 +1559,7 @@ // Set the number of grid points per dimension. // Works best with 5 or more points in each dimension. - #define GRID_MAX_POINTS_X 9 + #define GRID_MAX_POINTS_X 7 #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X // Probe along the Y axis, advancing X after each column @@ -1695,7 +1700,7 @@ #endif // Delta only homes to Z -#define HOMING_FEEDRATE_MM_M { (200*60), (200*60), (200*60) } +#define HOMING_FEEDRATE_MM_M { (100*60), (100*60), (100*60) } // Validate that endstops are triggered on homing moves #define VALIDATE_HOMING_ENDSTOPS @@ -1772,7 +1777,7 @@ * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) */ -//#define EEPROM_SETTINGS // Persistent storage with M500 and M501 +#define EEPROM_SETTINGS // Persistent storage with M500 and M501 //#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. #define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load @@ -1787,7 +1792,7 @@ // every couple of seconds when it can't accept commands. // #define HOST_KEEPALIVE_FEATURE // Disable this if your host doesn't like keepalive messages -#define DEFAULT_KEEPALIVE_INTERVAL 2 // Number of seconds between "busy" messages. Set with M113. +#define DEFAULT_KEEPALIVE_INTERVAL 5 // Number of seconds between "busy" messages. Set with M113. #define BUSY_WHILE_HEATING // Some hosts require "busy" messages even during heating // @@ -1806,16 +1811,16 @@ // Preheat Constants - Up to 5 are supported without changes // #define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 180 -#define PREHEAT_1_TEMP_BED 70 +#define PREHEAT_1_TEMP_HOTEND 195 +#define PREHEAT_1_TEMP_BED 60 #define PREHEAT_1_TEMP_CHAMBER 35 -#define PREHEAT_1_FAN_SPEED 255 // Value from 0 to 255 +#define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 #define PREHEAT_2_LABEL "ABS" #define PREHEAT_2_TEMP_HOTEND 240 #define PREHEAT_2_TEMP_BED 100 #define PREHEAT_2_TEMP_CHAMBER 35 -#define PREHEAT_2_FAN_SPEED 255 // Value from 0 to 255 +#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 /** * Nozzle Park @@ -1945,7 +1950,7 @@ * * View the current statistics with M78. */ -//#define PRINTCOUNTER +#define PRINTCOUNTER #if ENABLED(PRINTCOUNTER) #define PRINTCOUNTER_SAVE_INTERVAL 60 // (minutes) EEPROM save interval during print #endif @@ -2021,7 +2026,7 @@ * * :['JAPANESE', 'WESTERN', 'CYRILLIC'] */ -#define DISPLAY_CHARSET_HD44780 JAPANESE +#define DISPLAY_CHARSET_HD44780 WESTERN /** * Info Screen Style (0:Classic, 1:Průša) @@ -2036,14 +2041,14 @@ * SD Card support is disabled by default. If your controller has an SD slot, * you must uncomment the following option or it won't work. */ -//#define SDSUPPORT +#define SDSUPPORT /** * SD CARD: ENABLE CRC * * Use CRC checks and retries on the SD communication. */ -//#define SD_CHECK_AND_RETRY +#define SD_CHECK_AND_RETRY /** * LCD Menu Items @@ -2137,7 +2142,7 @@ // // Note: Usually sold with a white PCB. // -//#define REPRAP_DISCOUNT_SMART_CONTROLLER +#define REPRAP_DISCOUNT_SMART_CONTROLLER // // GT2560 (YHCB2004) LCD Display diff --git a/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h b/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h index aa6bbae7e4..fb0bb28ecc 100644 --- a/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h +++ b/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "delta/FLSUN/auto_calibrate" + /** * Configuration_adv.h * @@ -1097,7 +1099,7 @@ * M909, M910 & LCD - only PRINTRBOARD_REVF & RIGIDBOARD_V2 */ //#define PWM_MOTOR_CURRENT { 1300, 1300, 1250 } // Values in milliamps -//#define DIGIPOT_MOTOR_CURRENT { 135,135,135,135,135 } // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A) +#define DIGIPOT_MOTOR_CURRENT { 135,135,135,135,135 } // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A) //#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis /** diff --git a/config/examples/delta/FLSUN/kossel/Configuration.h b/config/examples/delta/FLSUN/kossel/Configuration.h index 464282b015..acc8f63826 100644 --- a/config/examples/delta/FLSUN/kossel/Configuration.h +++ b/config/examples/delta/FLSUN/kossel/Configuration.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "delta/FLSUN/kossel" + /** * Configuration.h * @@ -69,7 +71,7 @@ // @section info // Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes. +#define STRING_CONFIG_H_AUTHOR "(LVD, FLSUN-AC)" // Who made the changes. //#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) /** @@ -134,11 +136,11 @@ // Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_RAMPS_14_EFB + #define MOTHERBOARD BOARD_RAMPS_13_EFB #endif // Name displayed in the LCD "Ready" message and Info menu -#define CUSTOM_MACHINE_NAME "Deltabot" +#define CUSTOM_MACHINE_NAME "FLSUN Kossel" // Printer's unique ID, used by some programs to differentiate between machines. // Choose your own or use a service like https://www.uuidgenerator.net/version4 @@ -318,7 +320,7 @@ * Enable and connect the power supply to the PS_ON_PIN. * Specify whether the power supply is active HIGH or active LOW. */ -#define PSU_CONTROL +//#define PSU_CONTROL //#define PSU_NAME "Power Supply" #if ENABLED(PSU_CONTROL) @@ -416,7 +418,7 @@ * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. */ -#define TEMP_SENSOR_0 -1 +#define TEMP_SENSOR_0 5 #define TEMP_SENSOR_1 0 #define TEMP_SENSOR_2 0 #define TEMP_SENSOR_3 0 @@ -424,7 +426,7 @@ #define TEMP_SENSOR_5 0 #define TEMP_SENSOR_6 0 #define TEMP_SENSOR_7 0 -#define TEMP_SENSOR_BED 0 +#define TEMP_SENSOR_BED 5 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 #define TEMP_SENSOR_COOLER 0 @@ -442,13 +444,13 @@ // Use temp sensor 1 as a redundant sensor with sensor 0. If the readings // from the two sensors differ too much the print will be aborted. //#define TEMP_SENSOR_1_AS_REDUNDANT -#define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10 +#define MAX_REDUNDANT_TEMP_SENSOR_DIFF 5 #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 #define TEMP_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer #define TEMP_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target -#define TEMP_BED_RESIDENCY_TIME 0 // (seconds) Time to wait for bed to "settle" in M190 +#define TEMP_BED_RESIDENCY_TIME 1 // (seconds) Time to wait for bed to "settle" in M190 #define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer #define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target @@ -472,15 +474,15 @@ // Above this temperature the heater will be switched off. // This can protect components from overheating, but NOT from shorts and failures. // (Use MINTEMP for thermistor short/failure protection.) -#define HEATER_0_MAXTEMP 275 -#define HEATER_1_MAXTEMP 275 -#define HEATER_2_MAXTEMP 275 -#define HEATER_3_MAXTEMP 275 -#define HEATER_4_MAXTEMP 275 -#define HEATER_5_MAXTEMP 275 -#define HEATER_6_MAXTEMP 275 -#define HEATER_7_MAXTEMP 275 -#define BED_MAXTEMP 150 +#define HEATER_0_MAXTEMP 250 +#define HEATER_1_MAXTEMP 250 +#define HEATER_2_MAXTEMP 250 +#define HEATER_3_MAXTEMP 250 +#define HEATER_4_MAXTEMP 250 +#define HEATER_5_MAXTEMP 250 +#define HEATER_6_MAXTEMP 250 +#define HEATER_7_MAXTEMP 250 +#define BED_MAXTEMP 115 #define CHAMBER_MAXTEMP 60 /** @@ -505,21 +507,22 @@ #define PID_K1 0.95 // Smoothing factor within any PID loop #if ENABLED(PIDTEMP) - //#define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) - //#define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) + #define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) + #define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) // Set/get with gcode: M301 E[extruder number, 0-2] + // E3D with 30MM fan #if ENABLED(PID_PARAMS_PER_HOTEND) // Specify between 1 and HOTENDS values per array. // If fewer than EXTRUDER values are provided, the last element will be repeated. - #define DEFAULT_Kp_LIST { 22.20, 22.20 } - #define DEFAULT_Ki_LIST { 1.08, 1.08 } - #define DEFAULT_Kd_LIST { 114.00, 114.00 } + #define DEFAULT_Kp_LIST { 24.77, 24.77 } + #define DEFAULT_Ki_LIST { 1.84, 1.84 } + #define DEFAULT_Kd_LIST { 83.61, 83.61 } #else - #define DEFAULT_Kp 22.20 - #define DEFAULT_Ki 1.08 - #define DEFAULT_Kd 114.00 + #define DEFAULT_Kp 24.77 + #define DEFAULT_Ki 1.84 + #define DEFAULT_Kd 83.61 #endif #endif // PIDTEMP @@ -556,11 +559,10 @@ //#define MIN_BED_POWER 0 //#define PID_BED_DEBUG // Sends debug data to the serial port. - // 120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - // from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) - #define DEFAULT_bedKp 10.00 - #define DEFAULT_bedKi .023 - #define DEFAULT_bedKd 305.4 + // D-force + #define DEFAULT_bedKp 22.97 + #define DEFAULT_bedKi 3.76 + #define DEFAULT_bedKd 29.2 // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. #endif // PIDTEMPBED @@ -634,7 +636,7 @@ * Note: For Bowden Extruders make this large enough to allow load/unload. */ #define PREVENT_LENGTHY_EXTRUDE -#define EXTRUDE_MAXLENGTH 200 +#define EXTRUDE_MAXLENGTH 300 //=========================================================================== //======================== Thermal Runaway Protection ======================= @@ -685,7 +687,7 @@ // Make delta curves from many straight lines (linear interpolation). // This is a trade-off between visible corners (not enough segments) // and processor overload (too many expensive sqrt calls). - #define DELTA_SEGMENTS_PER_SECOND 200 + #define DELTA_SEGMENTS_PER_SECOND 160 // After homing move down to a height where XY movement is unconstrained //#define DELTA_HOME_TO_SAFE_ZONE @@ -693,16 +695,16 @@ // Delta calibration menu // uncomment to add three points calibration menu option. // See http://minow.blogspot.com/index.html#4918805519571907051 - //#define DELTA_CALIBRATION_MENU + #define DELTA_CALIBRATION_MENU // uncomment to add G33 Delta Auto-Calibration (Enable EEPROM_SETTINGS to store results) - //#define DELTA_AUTO_CALIBRATION + #define DELTA_AUTO_CALIBRATION // NOTE NB all values for DELTA_* values MUST be floating point, so always have a decimal point in them #if ENABLED(DELTA_AUTO_CALIBRATION) // set the default number of probe points : n*n (1 -> 7) - #define DELTA_CALIBRATION_DEFAULT_POINTS 4 + #define DELTA_CALIBRATION_DEFAULT_POINTS 7 #endif #if EITHER(DELTA_AUTO_CALIBRATION, DELTA_CALIBRATION_MENU) @@ -711,18 +713,18 @@ #endif // Print surface diameter/2 minus unreachable space (avoid collisions with vertical towers). - #define DELTA_PRINTABLE_RADIUS 140.0 // (mm) + #define DELTA_PRINTABLE_RADIUS 70.0 // (mm) // Center-to-center distance of the holes in the diagonal push rods. - #define DELTA_DIAGONAL_ROD 250.0 // (mm) + #define DELTA_DIAGONAL_ROD 218.0 // (mm) // Distance between bed and nozzle Z home position - #define DELTA_HEIGHT 250.00 // (mm) Get this value from G33 auto calibrate + #define DELTA_HEIGHT 317.94 // (mm) Get this value from G33 auto calibrate #define DELTA_ENDSTOP_ADJ { 0.0, 0.0, 0.0 } // Get these values from G33 auto calibrate // Horizontal distance bridged by diagonal push rods when effector is centered. - #define DELTA_RADIUS 124.0 // (mm) Get this value from G33 auto calibrate + #define DELTA_RADIUS 110.0 // (mm) Get this value from G33 auto calibrate // Trim adjustments for individual towers // tower angle corrections for X and Y tower / rotate XYZ so Z tower angle = 0 @@ -778,12 +780,12 @@ #endif // Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define X_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. +#define Y_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. #define Z_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define X_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Y_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Z_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define X_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. +#define Y_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. +#define Z_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. #define Z_MIN_PROBE_ENDSTOP_INVERTING true // Set to true to invert the logic of the probe. /** @@ -872,18 +874,18 @@ #define XYZ_FULL_STEPS_PER_ROTATION 200 #define XYZ_MICROSTEPS 16 #define XYZ_BELT_PITCH 2 -#define XYZ_PULLEY_TEETH 20 +#define XYZ_PULLEY_TEETH 16 // delta speeds must be the same on xyz #define DEFAULT_XYZ_STEPS_PER_UNIT ((XYZ_FULL_STEPS_PER_ROTATION) * (XYZ_MICROSTEPS) / double(XYZ_BELT_PITCH) / double(XYZ_PULLEY_TEETH)) -#define DEFAULT_AXIS_STEPS_PER_UNIT { DEFAULT_XYZ_STEPS_PER_UNIT, DEFAULT_XYZ_STEPS_PER_UNIT, DEFAULT_XYZ_STEPS_PER_UNIT, 760*1.1 } // default steps per unit for Kossel (GT2, 20 tooth) +#define DEFAULT_AXIS_STEPS_PER_UNIT { DEFAULT_XYZ_STEPS_PER_UNIT, DEFAULT_XYZ_STEPS_PER_UNIT, DEFAULT_XYZ_STEPS_PER_UNIT, 100 } // default steps per unit for Kossel (GT2, 20 tooth) /** * Default Max Feed Rate (mm/s) * Override with M203 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_FEEDRATE { 500, 500, 500, 25 } +#define DEFAULT_MAX_FEEDRATE { 200, 200, 200, 25 } //#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 #if ENABLED(LIMITED_MAX_FR_EDITING) @@ -896,7 +898,7 @@ * Override with M201 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_ACCELERATION { 9000, 9000, 9000, 10000 } +#define DEFAULT_MAX_ACCELERATION { 4000, 4000, 4000, 4000 } //#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 #if ENABLED(LIMITED_MAX_ACCEL_EDITING) @@ -1016,7 +1018,7 @@ * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. * (e.g., an inductive probe or a nozzle-based probe-switch.) */ -//#define FIX_MOUNTED_PROBE +#define FIX_MOUNTED_PROBE /** * Use the nozzle as the probe, as with a conductive @@ -1091,6 +1093,7 @@ // 2 or 3 sets of coordinates for deploying and retracting the spring loaded touch probe on G29, // if servo actuated touch probe is not defined. Uncomment as appropriate for your printer/probe. + // Kossel Mini #define Z_PROBE_ALLEN_KEY_DEPLOY_1 { 30.0, DELTA_PRINTABLE_RADIUS, 100.0 } #define Z_PROBE_ALLEN_KEY_DEPLOY_1_FEEDRATE XY_PROBE_FEEDRATE @@ -1100,16 +1103,17 @@ #define Z_PROBE_ALLEN_KEY_DEPLOY_3 { 0.0, (DELTA_PRINTABLE_RADIUS) * 0.75, 100.0 } #define Z_PROBE_ALLEN_KEY_DEPLOY_3_FEEDRATE XY_PROBE_FEEDRATE + #define Z_PROBE_ALLEN_KEY_STOW_DEPTH 20 #define Z_PROBE_ALLEN_KEY_STOW_1 { -64.0, 56.0, 23.0 } // Move the probe into position #define Z_PROBE_ALLEN_KEY_STOW_1_FEEDRATE XY_PROBE_FEEDRATE - - #define Z_PROBE_ALLEN_KEY_STOW_2 { -64.0, 56.0, 3.0 } // Push it down + // Move the nozzle down further to push the probe into retracted position. + #define Z_PROBE_ALLEN_KEY_STOW_2 { -64.0, 56.0, 23.0-(Z_PROBE_ALLEN_KEY_STOW_DEPTH) } #define Z_PROBE_ALLEN_KEY_STOW_2_FEEDRATE (XY_PROBE_FEEDRATE)/10 + // Raise things back up slightly so we don't bump into anything + #define Z_PROBE_ALLEN_KEY_STOW_3 { -64.0, 56.0, 23.0+(Z_PROBE_ALLEN_KEY_STOW_DEPTH) } + #define Z_PROBE_ALLEN_KEY_STOW_3_FEEDRATE (XY_PROBE_FEEDRATE)/2 - #define Z_PROBE_ALLEN_KEY_STOW_3 { -64.0, 56.0, 50.0 } // Move it up to clear - #define Z_PROBE_ALLEN_KEY_STOW_3_FEEDRATE XY_PROBE_FEEDRATE - - #define Z_PROBE_ALLEN_KEY_STOW_4 { 0.0, 0.0, 50.0 } + #define Z_PROBE_ALLEN_KEY_STOW_4 { 0.0, 0.0, 23.0+(Z_PROBE_ALLEN_KEY_STOW_DEPTH) } #define Z_PROBE_ALLEN_KEY_STOW_4_FEEDRATE XY_PROBE_FEEDRATE #endif // Z_PROBE_ALLEN_KEY @@ -1154,20 +1158,20 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 0, -10, -3.5 } +#define NOZZLE_TO_PROBE_OFFSET { 0, 0, 0.10 } // Most probes should stay away from the edges of the bed, but // with NOZZLE_AS_PROBE this can be negative for a wider probing area. -#define PROBING_MARGIN 10 +#define PROBING_MARGIN 20 // X and Y axis travel speed (mm/min) between probes -#define XY_PROBE_FEEDRATE (66*60) +#define XY_PROBE_FEEDRATE (83*60) // Feedrate (mm/min) for the first approach when double-probing (MULTIPLE_PROBING == 2) -#define Z_PROBE_FEEDRATE_FAST (200*60) +#define Z_PROBE_FEEDRATE_FAST (100*60) // Feedrate (mm/min) for the "accurate" probe of each point -#define Z_PROBE_FEEDRATE_SLOW (Z_PROBE_FEEDRATE_FAST / 2) +#define Z_PROBE_FEEDRATE_SLOW (Z_PROBE_FEEDRATE_FAST) / 6 /** * Probe Activation Switch @@ -1222,10 +1226,10 @@ * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. */ -#define Z_CLEARANCE_DEPLOY_PROBE 15 // Z Clearance for Deploy/Stow -#define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points +#define Z_CLEARANCE_DEPLOY_PROBE 5 // Z Clearance for Deploy/Stow +#define Z_CLEARANCE_BETWEEN_PROBES 2 // Z Clearance between probe points #define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes -//#define Z_AFTER_PROBING 5 // Z position after probing is done +//#define Z_AFTER_PROBING 2 // Z position after probing is done #define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping @@ -1289,9 +1293,9 @@ // @section machine // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR false -#define INVERT_Y_DIR false -#define INVERT_Z_DIR false +#define INVERT_X_DIR true +#define INVERT_Y_DIR true +#define INVERT_Z_DIR true // @section extruder @@ -1317,7 +1321,7 @@ */ //#define Z_IDLE_HEIGHT Z_HOME_POS -//#define Z_HOMING_HEIGHT 4 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ... +#define Z_HOMING_HEIGHT 15 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ... // Be sure to have this much clearance over your Z_MAX_POS to prevent grinding. //#define Z_AFTER_HOMING 10 // (mm) Height to move to after homing Z @@ -1352,7 +1356,7 @@ */ // Min software endstops constrain movement within minimum coordinate bounds -#define MIN_SOFTWARE_ENDSTOPS +//#define MIN_SOFTWARE_ENDSTOPS #if ENABLED(MIN_SOFTWARE_ENDSTOPS) #define MIN_SOFTWARE_ENDSTOP_X #define MIN_SOFTWARE_ENDSTOP_Y @@ -1554,7 +1558,7 @@ // Set the number of grid points per dimension. // Works best with 5 or more points in each dimension. - #define GRID_MAX_POINTS_X 9 + #define GRID_MAX_POINTS_X 7 #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X // Probe along the Y axis, advancing X after each column @@ -1695,7 +1699,7 @@ #endif // Delta only homes to Z -#define HOMING_FEEDRATE_MM_M { (200*60), (200*60), (200*60) } +#define HOMING_FEEDRATE_MM_M { (100*60), (100*60), (100*60) } // Validate that endstops are triggered on homing moves #define VALIDATE_HOMING_ENDSTOPS @@ -1772,7 +1776,7 @@ * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) */ -//#define EEPROM_SETTINGS // Persistent storage with M500 and M501 +#define EEPROM_SETTINGS // Persistent storage with M500 and M501 //#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. #define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load @@ -1787,7 +1791,7 @@ // every couple of seconds when it can't accept commands. // #define HOST_KEEPALIVE_FEATURE // Disable this if your host doesn't like keepalive messages -#define DEFAULT_KEEPALIVE_INTERVAL 2 // Number of seconds between "busy" messages. Set with M113. +#define DEFAULT_KEEPALIVE_INTERVAL 5 // Number of seconds between "busy" messages. Set with M113. #define BUSY_WHILE_HEATING // Some hosts require "busy" messages even during heating // @@ -1806,16 +1810,16 @@ // Preheat Constants - Up to 5 are supported without changes // #define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 180 -#define PREHEAT_1_TEMP_BED 70 +#define PREHEAT_1_TEMP_HOTEND 195 +#define PREHEAT_1_TEMP_BED 60 #define PREHEAT_1_TEMP_CHAMBER 35 -#define PREHEAT_1_FAN_SPEED 255 // Value from 0 to 255 +#define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 #define PREHEAT_2_LABEL "ABS" #define PREHEAT_2_TEMP_HOTEND 240 #define PREHEAT_2_TEMP_BED 100 #define PREHEAT_2_TEMP_CHAMBER 35 -#define PREHEAT_2_FAN_SPEED 255 // Value from 0 to 255 +#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 /** * Nozzle Park @@ -1945,7 +1949,7 @@ * * View the current statistics with M78. */ -//#define PRINTCOUNTER +#define PRINTCOUNTER #if ENABLED(PRINTCOUNTER) #define PRINTCOUNTER_SAVE_INTERVAL 60 // (minutes) EEPROM save interval during print #endif @@ -2021,7 +2025,7 @@ * * :['JAPANESE', 'WESTERN', 'CYRILLIC'] */ -#define DISPLAY_CHARSET_HD44780 JAPANESE +#define DISPLAY_CHARSET_HD44780 WESTERN /** * Info Screen Style (0:Classic, 1:Průša) @@ -2036,14 +2040,14 @@ * SD Card support is disabled by default. If your controller has an SD slot, * you must uncomment the following option or it won't work. */ -//#define SDSUPPORT +#define SDSUPPORT /** * SD CARD: ENABLE CRC * * Use CRC checks and retries on the SD communication. */ -//#define SD_CHECK_AND_RETRY +#define SD_CHECK_AND_RETRY /** * LCD Menu Items @@ -2137,7 +2141,7 @@ // // Note: Usually sold with a white PCB. // -//#define REPRAP_DISCOUNT_SMART_CONTROLLER +#define REPRAP_DISCOUNT_SMART_CONTROLLER // // GT2560 (YHCB2004) LCD Display diff --git a/config/examples/delta/FLSUN/kossel/Configuration_adv.h b/config/examples/delta/FLSUN/kossel/Configuration_adv.h index aa6bbae7e4..43dbed631f 100644 --- a/config/examples/delta/FLSUN/kossel/Configuration_adv.h +++ b/config/examples/delta/FLSUN/kossel/Configuration_adv.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "delta/FLSUN/kossel" + /** * Configuration_adv.h * @@ -1097,7 +1099,7 @@ * M909, M910 & LCD - only PRINTRBOARD_REVF & RIGIDBOARD_V2 */ //#define PWM_MOTOR_CURRENT { 1300, 1300, 1250 } // Values in milliamps -//#define DIGIPOT_MOTOR_CURRENT { 135,135,135,135,135 } // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A) +#define DIGIPOT_MOTOR_CURRENT { 135,135,135,135,135 } // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A) //#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis /** diff --git a/config/examples/delta/FLSUN/kossel_mini/Configuration.h b/config/examples/delta/FLSUN/kossel_mini/Configuration.h index 464282b015..f08ed5d1c4 100644 --- a/config/examples/delta/FLSUN/kossel_mini/Configuration.h +++ b/config/examples/delta/FLSUN/kossel_mini/Configuration.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "delta/FLSUN/kossel_mini" + /** * Configuration.h * @@ -69,7 +71,7 @@ // @section info // Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes. +#define STRING_CONFIG_H_AUTHOR "(Michael Henke, flsun Kossel Mini)" // Who made the changes. //#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) /** @@ -134,11 +136,11 @@ // Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_RAMPS_14_EFB + #define MOTHERBOARD BOARD_RAMPS_13_EFB #endif // Name displayed in the LCD "Ready" message and Info menu -#define CUSTOM_MACHINE_NAME "Deltabot" +#define CUSTOM_MACHINE_NAME "Mini Kossel" // Printer's unique ID, used by some programs to differentiate between machines. // Choose your own or use a service like https://www.uuidgenerator.net/version4 @@ -318,7 +320,7 @@ * Enable and connect the power supply to the PS_ON_PIN. * Specify whether the power supply is active HIGH or active LOW. */ -#define PSU_CONTROL +//#define PSU_CONTROL //#define PSU_NAME "Power Supply" #if ENABLED(PSU_CONTROL) @@ -416,7 +418,7 @@ * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. */ -#define TEMP_SENSOR_0 -1 +#define TEMP_SENSOR_0 1 #define TEMP_SENSOR_1 0 #define TEMP_SENSOR_2 0 #define TEMP_SENSOR_3 0 @@ -424,7 +426,7 @@ #define TEMP_SENSOR_5 0 #define TEMP_SENSOR_6 0 #define TEMP_SENSOR_7 0 -#define TEMP_SENSOR_BED 0 +#define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 #define TEMP_SENSOR_COOLER 0 @@ -442,13 +444,13 @@ // Use temp sensor 1 as a redundant sensor with sensor 0. If the readings // from the two sensors differ too much the print will be aborted. //#define TEMP_SENSOR_1_AS_REDUNDANT -#define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10 +#define MAX_REDUNDANT_TEMP_SENSOR_DIFF 5 #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 #define TEMP_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer #define TEMP_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target -#define TEMP_BED_RESIDENCY_TIME 0 // (seconds) Time to wait for bed to "settle" in M190 +#define TEMP_BED_RESIDENCY_TIME 1 // (seconds) Time to wait for bed to "settle" in M190 #define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer #define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target @@ -505,21 +507,22 @@ #define PID_K1 0.95 // Smoothing factor within any PID loop #if ENABLED(PIDTEMP) - //#define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) - //#define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) + #define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) + #define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) // Set/get with gcode: M301 E[extruder number, 0-2] + // E3D with 30MM fan #if ENABLED(PID_PARAMS_PER_HOTEND) // Specify between 1 and HOTENDS values per array. // If fewer than EXTRUDER values are provided, the last element will be repeated. - #define DEFAULT_Kp_LIST { 22.20, 22.20 } - #define DEFAULT_Ki_LIST { 1.08, 1.08 } - #define DEFAULT_Kd_LIST { 114.00, 114.00 } + #define DEFAULT_Kp_LIST { 24.77, 24.77 } + #define DEFAULT_Ki_LIST { 1.84, 1.84 } + #define DEFAULT_Kd_LIST { 83.61, 83.61 } #else - #define DEFAULT_Kp 22.20 - #define DEFAULT_Ki 1.08 - #define DEFAULT_Kd 114.00 + #define DEFAULT_Kp 24.77 + #define DEFAULT_Ki 1.84 + #define DEFAULT_Kd 83.61 #endif #endif // PIDTEMP @@ -556,11 +559,10 @@ //#define MIN_BED_POWER 0 //#define PID_BED_DEBUG // Sends debug data to the serial port. - // 120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - // from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) - #define DEFAULT_bedKp 10.00 - #define DEFAULT_bedKi .023 - #define DEFAULT_bedKd 305.4 + // D-force + #define DEFAULT_bedKp 22.97 + #define DEFAULT_bedKi 3.76 + #define DEFAULT_bedKd 29.2 // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. #endif // PIDTEMPBED @@ -627,14 +629,14 @@ * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** */ #define PREVENT_COLD_EXTRUSION -#define EXTRUDE_MINTEMP 170 +#define EXTRUDE_MINTEMP 175 /** * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. * Note: For Bowden Extruders make this large enough to allow load/unload. */ #define PREVENT_LENGTHY_EXTRUDE -#define EXTRUDE_MAXLENGTH 200 +#define EXTRUDE_MAXLENGTH 300 //=========================================================================== //======================== Thermal Runaway Protection ======================= @@ -685,7 +687,7 @@ // Make delta curves from many straight lines (linear interpolation). // This is a trade-off between visible corners (not enough segments) // and processor overload (too many expensive sqrt calls). - #define DELTA_SEGMENTS_PER_SECOND 200 + #define DELTA_SEGMENTS_PER_SECOND 160 // After homing move down to a height where XY movement is unconstrained //#define DELTA_HOME_TO_SAFE_ZONE @@ -711,18 +713,18 @@ #endif // Print surface diameter/2 minus unreachable space (avoid collisions with vertical towers). - #define DELTA_PRINTABLE_RADIUS 140.0 // (mm) + #define DELTA_PRINTABLE_RADIUS 85.0 // (mm) // Center-to-center distance of the holes in the diagonal push rods. - #define DELTA_DIAGONAL_ROD 250.0 // (mm) + #define DELTA_DIAGONAL_ROD 218.0 // (mm) // Distance between bed and nozzle Z home position - #define DELTA_HEIGHT 250.00 // (mm) Get this value from G33 auto calibrate + #define DELTA_HEIGHT 280.00 // (mm) Get this value from G33 auto calibrate #define DELTA_ENDSTOP_ADJ { 0.0, 0.0, 0.0 } // Get these values from G33 auto calibrate // Horizontal distance bridged by diagonal push rods when effector is centered. - #define DELTA_RADIUS 124.0 // (mm) Get this value from G33 auto calibrate + #define DELTA_RADIUS 101.0 // (mm) Get this value from G33 auto calibrate // Trim adjustments for individual towers // tower angle corrections for X and Y tower / rotate XYZ so Z tower angle = 0 @@ -746,7 +748,7 @@ // extra connectors. Leave undefined any used for non-endstop and non-probe purposes. //#define USE_XMIN_PLUG //#define USE_YMIN_PLUG -#define USE_ZMIN_PLUG // a Z probe +#define USE_ZMIN_PLUG #define USE_XMAX_PLUG #define USE_YMAX_PLUG #define USE_ZMAX_PLUG @@ -778,13 +780,13 @@ #endif // Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define X_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Y_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Z_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Z_MIN_PROBE_ENDSTOP_INVERTING true // Set to true to invert the logic of the probe. +#define X_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. +#define Y_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. +#define Z_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. +#define X_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. +#define Y_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. +#define Z_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. +#define Z_MIN_PROBE_ENDSTOP_INVERTING false // Set to true to invert the logic of the probe. /** * Stepper Drivers @@ -872,18 +874,18 @@ #define XYZ_FULL_STEPS_PER_ROTATION 200 #define XYZ_MICROSTEPS 16 #define XYZ_BELT_PITCH 2 -#define XYZ_PULLEY_TEETH 20 +#define XYZ_PULLEY_TEETH 16 // delta speeds must be the same on xyz #define DEFAULT_XYZ_STEPS_PER_UNIT ((XYZ_FULL_STEPS_PER_ROTATION) * (XYZ_MICROSTEPS) / double(XYZ_BELT_PITCH) / double(XYZ_PULLEY_TEETH)) -#define DEFAULT_AXIS_STEPS_PER_UNIT { DEFAULT_XYZ_STEPS_PER_UNIT, DEFAULT_XYZ_STEPS_PER_UNIT, DEFAULT_XYZ_STEPS_PER_UNIT, 760*1.1 } // default steps per unit for Kossel (GT2, 20 tooth) +#define DEFAULT_AXIS_STEPS_PER_UNIT { DEFAULT_XYZ_STEPS_PER_UNIT, DEFAULT_XYZ_STEPS_PER_UNIT, DEFAULT_XYZ_STEPS_PER_UNIT, 90 } // default steps per unit for Kossel (GT2, 20 tooth) /** * Default Max Feed Rate (mm/s) * Override with M203 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_FEEDRATE { 500, 500, 500, 25 } +#define DEFAULT_MAX_FEEDRATE { 200, 200, 200, 200 } //#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 #if ENABLED(LIMITED_MAX_FR_EDITING) @@ -896,7 +898,7 @@ * Override with M201 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_ACCELERATION { 9000, 9000, 9000, 10000 } +#define DEFAULT_MAX_ACCELERATION { 4000, 4000, 4000, 4000 } //#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 #if ENABLED(LIMITED_MAX_ACCEL_EDITING) @@ -911,7 +913,7 @@ * M204 R Retract Acceleration * M204 T Travel Acceleration */ -#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves +#define DEFAULT_ACCELERATION 2500 // X, Y, Z and E acceleration for printing moves #define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts #define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves @@ -947,7 +949,7 @@ * https://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html */ #if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.013 // (mm) Distance from real junction edge + #define JUNCTION_DEVIATION_MM 0.016 // (mm) Distance from real junction edge #define JD_HANDLE_SMALL_SEGMENTS // Use curvature estimation instead of just the junction angle // for small segments (< 1mm) with large junction angles (> 135°). #endif @@ -1016,7 +1018,7 @@ * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. * (e.g., an inductive probe or a nozzle-based probe-switch.) */ -//#define FIX_MOUNTED_PROBE +#define FIX_MOUNTED_PROBE /** * Use the nozzle as the probe, as with a conductive @@ -1091,6 +1093,7 @@ // 2 or 3 sets of coordinates for deploying and retracting the spring loaded touch probe on G29, // if servo actuated touch probe is not defined. Uncomment as appropriate for your printer/probe. + // Kossel Mini #define Z_PROBE_ALLEN_KEY_DEPLOY_1 { 30.0, DELTA_PRINTABLE_RADIUS, 100.0 } #define Z_PROBE_ALLEN_KEY_DEPLOY_1_FEEDRATE XY_PROBE_FEEDRATE @@ -1100,16 +1103,17 @@ #define Z_PROBE_ALLEN_KEY_DEPLOY_3 { 0.0, (DELTA_PRINTABLE_RADIUS) * 0.75, 100.0 } #define Z_PROBE_ALLEN_KEY_DEPLOY_3_FEEDRATE XY_PROBE_FEEDRATE + #define Z_PROBE_ALLEN_KEY_STOW_DEPTH 20 #define Z_PROBE_ALLEN_KEY_STOW_1 { -64.0, 56.0, 23.0 } // Move the probe into position #define Z_PROBE_ALLEN_KEY_STOW_1_FEEDRATE XY_PROBE_FEEDRATE - - #define Z_PROBE_ALLEN_KEY_STOW_2 { -64.0, 56.0, 3.0 } // Push it down + // Move the nozzle down further to push the probe into retracted position. + #define Z_PROBE_ALLEN_KEY_STOW_2 { -64.0, 56.0, 23.0-(Z_PROBE_ALLEN_KEY_STOW_DEPTH) } #define Z_PROBE_ALLEN_KEY_STOW_2_FEEDRATE (XY_PROBE_FEEDRATE)/10 + // Raise things back up slightly so we don't bump into anything + #define Z_PROBE_ALLEN_KEY_STOW_3 { -64.0, 56.0, 23.0+(Z_PROBE_ALLEN_KEY_STOW_DEPTH) } + #define Z_PROBE_ALLEN_KEY_STOW_3_FEEDRATE (XY_PROBE_FEEDRATE)/2 - #define Z_PROBE_ALLEN_KEY_STOW_3 { -64.0, 56.0, 50.0 } // Move it up to clear - #define Z_PROBE_ALLEN_KEY_STOW_3_FEEDRATE XY_PROBE_FEEDRATE - - #define Z_PROBE_ALLEN_KEY_STOW_4 { 0.0, 0.0, 50.0 } + #define Z_PROBE_ALLEN_KEY_STOW_4 { 0.0, 0.0, 23.0+(Z_PROBE_ALLEN_KEY_STOW_DEPTH) } #define Z_PROBE_ALLEN_KEY_STOW_4_FEEDRATE XY_PROBE_FEEDRATE #endif // Z_PROBE_ALLEN_KEY @@ -1154,17 +1158,17 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 0, -10, -3.5 } +#define NOZZLE_TO_PROBE_OFFSET { 0, 0, 0.25 } // Most probes should stay away from the edges of the bed, but // with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed (mm/min) between probes -#define XY_PROBE_FEEDRATE (66*60) +#define XY_PROBE_FEEDRATE (33*60) // Feedrate (mm/min) for the first approach when double-probing (MULTIPLE_PROBING == 2) -#define Z_PROBE_FEEDRATE_FAST (200*60) +#define Z_PROBE_FEEDRATE_FAST (45*60) // Feedrate (mm/min) for the "accurate" probe of each point #define Z_PROBE_FEEDRATE_SLOW (Z_PROBE_FEEDRATE_FAST / 2) @@ -1205,7 +1209,7 @@ * A total of 2 does fast/slow probes with a weighted average. * A total of 3 or more adds more slow probes, taking the average. */ -//#define MULTIPLE_PROBING 2 +#define MULTIPLE_PROBING 2 //#define EXTRA_PROBING 1 /** @@ -1222,7 +1226,7 @@ * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. */ -#define Z_CLEARANCE_DEPLOY_PROBE 15 // Z Clearance for Deploy/Stow +#define Z_CLEARANCE_DEPLOY_PROBE 50 // Z Clearance for Deploy/Stow #define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points #define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes //#define Z_AFTER_PROBING 5 // Z position after probing is done @@ -1234,7 +1238,7 @@ #define Z_PROBE_OFFSET_RANGE_MAX 20 // Enable the M48 repeatability test to test probe accuracy -//#define Z_MIN_PROBE_REPEATABILITY_TEST +#define Z_MIN_PROBE_REPEATABILITY_TEST // Before deploy/stow pause for user confirmation //#define PAUSE_BEFORE_DEPLOY_STOW @@ -1289,9 +1293,9 @@ // @section machine // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR false -#define INVERT_Y_DIR false -#define INVERT_Z_DIR false +#define INVERT_X_DIR true +#define INVERT_Y_DIR true +#define INVERT_Z_DIR true // @section extruder @@ -1317,7 +1321,7 @@ */ //#define Z_IDLE_HEIGHT Z_HOME_POS -//#define Z_HOMING_HEIGHT 4 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ... +#define Z_HOMING_HEIGHT 15 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ... // Be sure to have this much clearance over your Z_MAX_POS to prevent grinding. //#define Z_AFTER_HOMING 10 // (mm) Height to move to after homing Z @@ -1486,7 +1490,7 @@ */ //#define AUTO_BED_LEVELING_3POINT //#define AUTO_BED_LEVELING_LINEAR -//#define AUTO_BED_LEVELING_BILINEAR +#define AUTO_BED_LEVELING_BILINEAR //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING @@ -1690,12 +1694,12 @@ //#define Z_SAFE_HOMING #if ENABLED(Z_SAFE_HOMING) - #define Z_SAFE_HOMING_X_POINT X_CENTER // X point for Z homing - #define Z_SAFE_HOMING_Y_POINT Y_CENTER // Y point for Z homing + #define Z_SAFE_HOMING_X_POINT ((X_MIN_POS + X_MAX_POS) / 2) // X point for Z homing + #define Z_SAFE_HOMING_Y_POINT ((Y_MIN_POS + Y_MAX_POS) / 2) // Y point for Z homing #endif // Delta only homes to Z -#define HOMING_FEEDRATE_MM_M { (200*60), (200*60), (200*60) } +#define HOMING_FEEDRATE_MM_M { (45*60), (45*60), (45*60) } // Validate that endstops are triggered on homing moves #define VALIDATE_HOMING_ENDSTOPS @@ -1772,7 +1776,7 @@ * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) */ -//#define EEPROM_SETTINGS // Persistent storage with M500 and M501 +#define EEPROM_SETTINGS // Persistent storage with M500 and M501 //#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. #define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load @@ -1787,7 +1791,7 @@ // every couple of seconds when it can't accept commands. // #define HOST_KEEPALIVE_FEATURE // Disable this if your host doesn't like keepalive messages -#define DEFAULT_KEEPALIVE_INTERVAL 2 // Number of seconds between "busy" messages. Set with M113. +#define DEFAULT_KEEPALIVE_INTERVAL 5 // Number of seconds between "busy" messages. Set with M113. #define BUSY_WHILE_HEATING // Some hosts require "busy" messages even during heating // @@ -1809,13 +1813,13 @@ #define PREHEAT_1_TEMP_HOTEND 180 #define PREHEAT_1_TEMP_BED 70 #define PREHEAT_1_TEMP_CHAMBER 35 -#define PREHEAT_1_FAN_SPEED 255 // Value from 0 to 255 +#define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 #define PREHEAT_2_LABEL "ABS" #define PREHEAT_2_TEMP_HOTEND 240 #define PREHEAT_2_TEMP_BED 100 #define PREHEAT_2_TEMP_CHAMBER 35 -#define PREHEAT_2_FAN_SPEED 255 // Value from 0 to 255 +#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 /** * Nozzle Park @@ -1945,7 +1949,7 @@ * * View the current statistics with M78. */ -//#define PRINTCOUNTER +#define PRINTCOUNTER #if ENABLED(PRINTCOUNTER) #define PRINTCOUNTER_SAVE_INTERVAL 60 // (minutes) EEPROM save interval during print #endif @@ -2021,7 +2025,7 @@ * * :['JAPANESE', 'WESTERN', 'CYRILLIC'] */ -#define DISPLAY_CHARSET_HD44780 JAPANESE +#define DISPLAY_CHARSET_HD44780 WESTERN /** * Info Screen Style (0:Classic, 1:Průša) @@ -2036,7 +2040,7 @@ * SD Card support is disabled by default. If your controller has an SD slot, * you must uncomment the following option or it won't work. */ -//#define SDSUPPORT +#define SDSUPPORT /** * SD CARD: ENABLE CRC @@ -2137,7 +2141,7 @@ // // Note: Usually sold with a white PCB. // -//#define REPRAP_DISCOUNT_SMART_CONTROLLER +#define REPRAP_DISCOUNT_SMART_CONTROLLER // // GT2560 (YHCB2004) LCD Display diff --git a/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h b/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h index aa6bbae7e4..2364679018 100644 --- a/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h +++ b/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "delta/FLSUN/kossel_mini" + /** * Configuration_adv.h * diff --git a/config/examples/delta/Geeetech/G2/Configuration.h b/config/examples/delta/Geeetech/G2/Configuration.h index 464282b015..d51f4aa07e 100644 --- a/config/examples/delta/Geeetech/G2/Configuration.h +++ b/config/examples/delta/Geeetech/G2/Configuration.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "delta/Geeetech/G2" + /** * Configuration.h * @@ -134,11 +136,11 @@ // Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_RAMPS_14_EFB + #define MOTHERBOARD BOARD_GT2560_REV_A_PLUS #endif // Name displayed in the LCD "Ready" message and Info menu -#define CUSTOM_MACHINE_NAME "Deltabot" +#define CUSTOM_MACHINE_NAME "3D Printer" // Printer's unique ID, used by some programs to differentiate between machines. // Choose your own or use a service like https://www.uuidgenerator.net/version4 @@ -319,7 +321,7 @@ * Specify whether the power supply is active HIGH or active LOW. */ #define PSU_CONTROL -//#define PSU_NAME "Power Supply" +#define PSU_NAME "Power Supply" #if ENABLED(PSU_CONTROL) #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box @@ -416,15 +418,15 @@ * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. */ -#define TEMP_SENSOR_0 -1 -#define TEMP_SENSOR_1 0 +#define TEMP_SENSOR_0 1 +#define TEMP_SENSOR_1 0 // G2S 1 #define TEMP_SENSOR_2 0 #define TEMP_SENSOR_3 0 #define TEMP_SENSOR_4 0 #define TEMP_SENSOR_5 0 #define TEMP_SENSOR_6 0 #define TEMP_SENSOR_7 0 -#define TEMP_SENSOR_BED 0 +#define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 #define TEMP_SENSOR_COOLER 0 @@ -448,7 +450,7 @@ #define TEMP_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer #define TEMP_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target -#define TEMP_BED_RESIDENCY_TIME 0 // (seconds) Time to wait for bed to "settle" in M190 +#define TEMP_BED_RESIDENCY_TIME 10 // (seconds) Time to wait for bed to "settle" in M190 #define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer #define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target @@ -505,8 +507,8 @@ #define PID_K1 0.95 // Smoothing factor within any PID loop #if ENABLED(PIDTEMP) - //#define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) - //#define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) + #define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) + #define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) // Set/get with gcode: M301 E[extruder number, 0-2] @@ -685,24 +687,22 @@ // Make delta curves from many straight lines (linear interpolation). // This is a trade-off between visible corners (not enough segments) // and processor overload (too many expensive sqrt calls). - #define DELTA_SEGMENTS_PER_SECOND 200 + #define DELTA_SEGMENTS_PER_SECOND 160 // After homing move down to a height where XY movement is unconstrained - //#define DELTA_HOME_TO_SAFE_ZONE + #define DELTA_HOME_TO_SAFE_ZONE // Delta calibration menu // uncomment to add three points calibration menu option. // See http://minow.blogspot.com/index.html#4918805519571907051 - //#define DELTA_CALIBRATION_MENU + #define DELTA_CALIBRATION_MENU // uncomment to add G33 Delta Auto-Calibration (Enable EEPROM_SETTINGS to store results) - //#define DELTA_AUTO_CALIBRATION - - // NOTE NB all values for DELTA_* values MUST be floating point, so always have a decimal point in them + #define DELTA_AUTO_CALIBRATION #if ENABLED(DELTA_AUTO_CALIBRATION) // set the default number of probe points : n*n (1 -> 7) - #define DELTA_CALIBRATION_DEFAULT_POINTS 4 + #define DELTA_CALIBRATION_DEFAULT_POINTS 2 #endif #if EITHER(DELTA_AUTO_CALIBRATION, DELTA_CALIBRATION_MENU) @@ -711,23 +711,23 @@ #endif // Print surface diameter/2 minus unreachable space (avoid collisions with vertical towers). - #define DELTA_PRINTABLE_RADIUS 140.0 // (mm) + #define DELTA_PRINTABLE_RADIUS 90.0 // (mm) // Center-to-center distance of the holes in the diagonal push rods. - #define DELTA_DIAGONAL_ROD 250.0 // (mm) + #define DELTA_DIAGONAL_ROD 196.0 // (mm) // Distance between bed and nozzle Z home position - #define DELTA_HEIGHT 250.00 // (mm) Get this value from G33 auto calibrate + #define DELTA_HEIGHT 200 // (mm) Get this value from G33 auto calibrate #define DELTA_ENDSTOP_ADJ { 0.0, 0.0, 0.0 } // Get these values from G33 auto calibrate // Horizontal distance bridged by diagonal push rods when effector is centered. - #define DELTA_RADIUS 124.0 // (mm) Get this value from G33 auto calibrate + #define DELTA_RADIUS 90.0 // (mm) Get this value from G33 auto calibrate // Trim adjustments for individual towers // tower angle corrections for X and Y tower / rotate XYZ so Z tower angle = 0 // measured in degrees anticlockwise looking from above the printer - #define DELTA_TOWER_ANGLE_TRIM { 0.0, 0.0, 0.0 } // Get these values from G33 auto calibrate + #define DELTA_TOWER_ANGLE_TRIM { 0.70, 0.05, -0.74 } // Get these values from G33 auto calibrate // Delta radius and diagonal rod adjustments (mm) //#define DELTA_RADIUS_TRIM_TOWER { 0.0, 0.0, 0.0 } @@ -778,13 +778,13 @@ #endif // Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define X_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Y_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Z_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Z_MIN_PROBE_ENDSTOP_INVERTING true // Set to true to invert the logic of the probe. +#define X_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. +#define Y_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. +#define Z_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. // G2 false +#define X_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. +#define Y_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. +#define Z_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. +#define Z_MIN_PROBE_ENDSTOP_INVERTING Z_MIN_ENDSTOP_INVERTING // Set to true to invert the logic of the probe. /** * Stepper Drivers @@ -813,7 +813,7 @@ //#define Z3_DRIVER_TYPE A4988 //#define Z4_DRIVER_TYPE A4988 #define E0_DRIVER_TYPE A4988 -//#define E1_DRIVER_TYPE A4988 +#define E1_DRIVER_TYPE A4988 //#define E2_DRIVER_TYPE A4988 //#define E3_DRIVER_TYPE A4988 //#define E4_DRIVER_TYPE A4988 @@ -837,7 +837,7 @@ * * :[2,3,4,5,6,7] */ -//#define ENDSTOP_NOISE_THRESHOLD 2 +#define ENDSTOP_NOISE_THRESHOLD 2 // Check for stuck or disconnected endstops during homing moves. //#define DETECT_BROKEN_ENDSTOP @@ -861,7 +861,7 @@ * following movement settings. If fewer factors are given than the * total number of extruders, the last value applies to the rest. */ -//#define DISTINCT_E_FACTORS +#define DISTINCT_E_FACTORS /** * Default Axis Steps Per Unit (steps/mm) @@ -876,18 +876,18 @@ // delta speeds must be the same on xyz #define DEFAULT_XYZ_STEPS_PER_UNIT ((XYZ_FULL_STEPS_PER_ROTATION) * (XYZ_MICROSTEPS) / double(XYZ_BELT_PITCH) / double(XYZ_PULLEY_TEETH)) -#define DEFAULT_AXIS_STEPS_PER_UNIT { DEFAULT_XYZ_STEPS_PER_UNIT, DEFAULT_XYZ_STEPS_PER_UNIT, DEFAULT_XYZ_STEPS_PER_UNIT, 760*1.1 } // default steps per unit for Kossel (GT2, 20 tooth) +#define DEFAULT_AXIS_STEPS_PER_UNIT { DEFAULT_XYZ_STEPS_PER_UNIT, DEFAULT_XYZ_STEPS_PER_UNIT, DEFAULT_XYZ_STEPS_PER_UNIT, 100 } // default steps per unit for Kossel (GT2, 20 tooth) /** * Default Max Feed Rate (mm/s) * Override with M203 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_FEEDRATE { 500, 500, 500, 25 } +#define DEFAULT_MAX_FEEDRATE { 200, 200, 200, 25 } //#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 #if ENABLED(LIMITED_MAX_FR_EDITING) - #define MAX_FEEDRATE_EDIT_VALUES { 600, 600, 10, 50 } // ...or, set your own edit limits + #define MAX_FEEDRATE_EDIT_VALUES { 600, 600, 600, 50 } // ...or, set your own edit limits #endif /** @@ -896,7 +896,7 @@ * Override with M201 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_ACCELERATION { 9000, 9000, 9000, 10000 } +#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 3000, 10000 } //#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 #if ENABLED(LIMITED_MAX_ACCEL_EDITING) @@ -911,9 +911,9 @@ * M204 R Retract Acceleration * M204 T Travel Acceleration */ -#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves +#define DEFAULT_ACCELERATION 1000 // X, Y, Z and E acceleration for printing moves +#define DEFAULT_RETRACT_ACCELERATION 1000 // E acceleration for retracts +#define DEFAULT_TRAVEL_ACCELERATION 1000 // X, Y, Z acceleration for travel (non printing) moves /** * Default Jerk limits (mm/s) @@ -925,7 +925,7 @@ */ #define CLASSIC_JERK #if ENABLED(CLASSIC_JERK) - #define DEFAULT_XJERK 10.0 + #define DEFAULT_XJERK 8.0 #define DEFAULT_YJERK DEFAULT_XJERK #define DEFAULT_ZJERK DEFAULT_XJERK // Must be same as XY for delta @@ -960,7 +960,7 @@ * * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained */ -//#define S_CURVE_ACCELERATION +#define S_CURVE_ACCELERATION //=========================================================================== //============================= Z Probe Options ============================= @@ -1085,7 +1085,7 @@ * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. Uses Z_MIN_PIN. */ -//#define Z_PROBE_ALLEN_KEY +#define Z_PROBE_ALLEN_KEY #if ENABLED(Z_PROBE_ALLEN_KEY) // 2 or 3 sets of coordinates for deploying and retracting the spring loaded touch probe on G29, @@ -1154,17 +1154,17 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 0, -10, -3.5 } +#define NOZZLE_TO_PROBE_OFFSET { 19, -11, -2 } // G2 { 19, -11, -2 } // Most probes should stay away from the edges of the bed, but // with NOZZLE_AS_PROBE this can be negative for a wider probing area. -#define PROBING_MARGIN 10 +#define PROBING_MARGIN 1 // X and Y axis travel speed (mm/min) between probes -#define XY_PROBE_FEEDRATE (66*60) +#define XY_PROBE_FEEDRATE HOMING_FEEDRATE_Z // Feedrate (mm/min) for the first approach when double-probing (MULTIPLE_PROBING == 2) -#define Z_PROBE_FEEDRATE_FAST (200*60) +#define Z_PROBE_FEEDRATE_FAST (60*60) // Feedrate (mm/min) for the "accurate" probe of each point #define Z_PROBE_FEEDRATE_SLOW (Z_PROBE_FEEDRATE_FAST / 2) @@ -1222,7 +1222,7 @@ * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. */ -#define Z_CLEARANCE_DEPLOY_PROBE 15 // Z Clearance for Deploy/Stow +#define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow #define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points #define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes //#define Z_AFTER_PROBING 5 // Z position after probing is done @@ -1289,21 +1289,21 @@ // @section machine // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR false -#define INVERT_Y_DIR false -#define INVERT_Z_DIR false +#define INVERT_X_DIR true +#define INVERT_Y_DIR true +#define INVERT_Z_DIR true // @section extruder // For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR false -#define INVERT_E1_DIR false -#define INVERT_E2_DIR false -#define INVERT_E3_DIR false -#define INVERT_E4_DIR false -#define INVERT_E5_DIR false -#define INVERT_E6_DIR false -#define INVERT_E7_DIR false +#define INVERT_E0_DIR true +#define INVERT_E1_DIR true +#define INVERT_E2_DIR true +#define INVERT_E3_DIR true +#define INVERT_E4_DIR true +#define INVERT_E5_DIR true +#define INVERT_E6_DIR true +#define INVERT_E7_DIR true // @section homing @@ -1317,7 +1317,7 @@ */ //#define Z_IDLE_HEIGHT Z_HOME_POS -//#define Z_HOMING_HEIGHT 4 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ... +#define Z_HOMING_HEIGHT 4 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ... // Be sure to have this much clearance over your Z_MAX_POS to prevent grinding. //#define Z_AFTER_HOMING 10 // (mm) Height to move to after homing Z @@ -1368,7 +1368,7 @@ #endif #if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS) - //#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD + #define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD #endif /** @@ -1487,7 +1487,7 @@ //#define AUTO_BED_LEVELING_3POINT //#define AUTO_BED_LEVELING_LINEAR //#define AUTO_BED_LEVELING_BILINEAR -//#define AUTO_BED_LEVELING_UBL +#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING /** @@ -1495,7 +1495,7 @@ * these options to restore the prior leveling state or to always enable * leveling immediately after G28. */ -//#define RESTORE_LEVELING_AFTER_G28 +#define RESTORE_LEVELING_AFTER_G28 //#define ENABLE_LEVELING_AFTER_G28 /** @@ -1554,7 +1554,7 @@ // Set the number of grid points per dimension. // Works best with 5 or more points in each dimension. - #define GRID_MAX_POINTS_X 9 + #define GRID_MAX_POINTS_X 5 #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X // Probe along the Y axis, advancing X after each column @@ -1587,7 +1587,7 @@ //#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh #define MESH_INSET 1 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. + #define GRID_MAX_POINTS_X 5 // Don't use more than 15 points per axis, implementation limited. #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X //#define UBL_HILBERT_CURVE // Use Hilbert distribution for less travel when probing multiple points @@ -1595,7 +1595,7 @@ #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 - //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used + #define UBL_Z_RAISE_WHEN_OFF_MESH 0 // When the nozzle is off the mesh, this value is used // as the Z-Height correction value. //#define UBL_MESH_WIZARD // Run several commands in a row to get a complete mesh @@ -1606,7 +1606,7 @@ //=================================== Mesh ================================== //=========================================================================== - #define MESH_INSET 10 // Set Mesh bounds as an inset region of the bed + #define MESH_INSET 1 // Set Mesh bounds as an inset region of the bed #define GRID_MAX_POINTS_X 3 // Don't use more than 7 points per axis, implementation limited. #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X @@ -1633,7 +1633,7 @@ #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner + #define LEVEL_CENTER_TOO // Move to the center after the last corner //#define LEVEL_CORNERS_USE_PROBE #if ENABLED(LEVEL_CORNERS_USE_PROBE) #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 @@ -1694,8 +1694,9 @@ #define Z_SAFE_HOMING_Y_POINT Y_CENTER // Y point for Z homing #endif -// Delta only homes to Z -#define HOMING_FEEDRATE_MM_M { (200*60), (200*60), (200*60) } +// Homing speeds (mm/min) +#define HOMING_FEEDRATE_Z (60*60) +#define HOMING_FEEDRATE_MM_M { HOMING_FEEDRATE_Z, HOMING_FEEDRATE_Z, HOMING_FEEDRATE_Z } // Validate that endstops are triggered on homing moves #define VALIDATE_HOMING_ENDSTOPS @@ -1772,12 +1773,12 @@ * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) */ -//#define EEPROM_SETTINGS // Persistent storage with M500 and M501 +#define EEPROM_SETTINGS // Persistent storage with M500 and M501 //#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. #define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load #if ENABLED(EEPROM_SETTINGS) - //#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. + #define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. #endif // @@ -1806,16 +1807,16 @@ // Preheat Constants - Up to 5 are supported without changes // #define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 180 -#define PREHEAT_1_TEMP_BED 70 +#define PREHEAT_1_TEMP_HOTEND 200 +#define PREHEAT_1_TEMP_BED 60 #define PREHEAT_1_TEMP_CHAMBER 35 -#define PREHEAT_1_FAN_SPEED 255 // Value from 0 to 255 +#define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 #define PREHEAT_2_LABEL "ABS" -#define PREHEAT_2_TEMP_HOTEND 240 +#define PREHEAT_2_TEMP_HOTEND 250 #define PREHEAT_2_TEMP_BED 100 #define PREHEAT_2_TEMP_CHAMBER 35 -#define PREHEAT_2_FAN_SPEED 255 // Value from 0 to 255 +#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 /** * Nozzle Park @@ -1828,11 +1829,11 @@ * P1 Raise the nozzle always to Z-park height. * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. */ -//#define NOZZLE_PARK_FEATURE +#define NOZZLE_PARK_FEATURE #if ENABLED(NOZZLE_PARK_FEATURE) // Specify a park position as { X, Y, Z_raise } - #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), 0, 20 } + #define NOZZLE_PARK_POINT { 0, 0, 20 } //#define NOZZLE_PARK_X_ONLY // X move only is required to park //#define NOZZLE_PARK_Y_ONLY // Y move only is required to park #define NOZZLE_PARK_Z_RAISE_MIN 2 // (mm) Always raise Z by at least this distance @@ -2036,7 +2037,7 @@ * SD Card support is disabled by default. If your controller has an SD slot, * you must uncomment the following option or it won't work. */ -//#define SDSUPPORT +#define SDSUPPORT /** * SD CARD: ENABLE CRC @@ -2114,7 +2115,7 @@ // If you have a speaker that can produce tones, enable it here. // By default Marlin assumes you have a buzzer with a fixed frequency. // -//#define SPEAKER +#define SPEAKER // // The duration and frequency for the UI feedback sound. @@ -2123,8 +2124,8 @@ // Note: Test audio output with the G-Code: // M300 S P // -//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 -//#define LCD_FEEDBACK_FREQUENCY_HZ 5000 +#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 10 +#define LCD_FEEDBACK_FREQUENCY_HZ 50 //============================================================================= //======================== LCD / Controller Selection ========================= @@ -2137,7 +2138,7 @@ // // Note: Usually sold with a white PCB. // -//#define REPRAP_DISCOUNT_SMART_CONTROLLER +#define REPRAP_DISCOUNT_SMART_CONTROLLER // // GT2560 (YHCB2004) LCD Display @@ -2718,7 +2719,7 @@ // Use software PWM to drive the fan, as for the heaters. This uses a very low frequency // which is not as annoying as with the hardware PWM. On the other hand, if this frequency // is too low, you should also increment SOFT_PWM_SCALE. -//#define FAN_SOFT_PWM +#define FAN_SOFT_PWM // Incrementing this by 1 will double the software PWM frequency, // affecting heaters, and the fan if FAN_SOFT_PWM is enabled. diff --git a/config/examples/delta/Geeetech/G2/Configuration_adv.h b/config/examples/delta/Geeetech/G2/Configuration_adv.h index aa6bbae7e4..55832d6fa5 100644 --- a/config/examples/delta/Geeetech/G2/Configuration_adv.h +++ b/config/examples/delta/Geeetech/G2/Configuration_adv.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "delta/Geeetech/G2" + /** * Configuration_adv.h * @@ -307,7 +309,7 @@ #if ENABLED(PIDTEMP) // Add an experimental additional term to the heater power, proportional to the extrusion speed. // A well-chosen Kc value should add just enough power to melt the increased material volume. - //#define PID_EXTRUSION_SCALING + #define PID_EXTRUSION_SCALING #if ENABLED(PID_EXTRUSION_SCALING) #define DEFAULT_Kc (100) // heating power = Kc * e_speed #define LPQ_MAX_LEN 50 @@ -391,7 +393,7 @@ // Show Temperature ADC value // Enable for M105 to include ADC values read from temperature sensors. -//#define SHOW_TEMP_ADC_VALUES +#define SHOW_TEMP_ADC_VALUES /** * High Temperature Thermistor Support @@ -411,14 +413,14 @@ // The number of consecutive low temperature errors that can occur // before a min_temp_error is triggered. (Shouldn't be more than 10.) -//#define MAX_CONSECUTIVE_LOW_TEMPERATURE_ERROR_ALLOWED 0 +#define MAX_CONSECUTIVE_LOW_TEMPERATURE_ERROR_ALLOWED 10 // The number of milliseconds a hotend will preheat before starting to check // the temperature. This value should NOT be set to the time it takes the // hot end to reach the target temperature, but the time it takes to reach // the minimum temperature your thermistor can read. The lower the better/safer. // This shouldn't need to be more than 30 seconds (30000) -//#define MILLISECONDS_PREHEAT_TIME 0 +#define MILLISECONDS_PREHEAT_TIME 30000 // @section extruder @@ -496,7 +498,7 @@ * * Define one or both of these to override the default 0-255 range. */ -//#define FAN_MIN_PWM 50 +#define FAN_MIN_PWM 50 //#define FAN_MAX_PWM 128 /** @@ -631,7 +633,7 @@ //#define X_DUAL_ENDSTOPS #if ENABLED(X_DUAL_ENDSTOPS) #define X2_USE_ENDSTOP _XMAX_ - #define X2_ENDSTOP_ADJUSTMENT 0 + #define X_DUAL_ENDSTOPS_ADJUSTMENT 0 #endif #endif @@ -927,9 +929,9 @@ * The Deactive Time can be overridden with M18 and M84. Set to 0 for No Timeout. */ #define DEFAULT_STEPPER_DEACTIVE_TIME 60 -#define DISABLE_INACTIVE_X true -#define DISABLE_INACTIVE_Y true -#define DISABLE_INACTIVE_Z true // Set 'false' if the nozzle could fall onto your printed part! +#define DISABLE_INACTIVE_X false +#define DISABLE_INACTIVE_Y false +#define DISABLE_INACTIVE_Z false // Set 'false' if the nozzle could fall onto your printed part! #define DISABLE_INACTIVE_E true // Default Minimum Feedrates for printing and travel moves @@ -1060,7 +1062,7 @@ * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the * lowest stepping frequencies. */ -//#define ADAPTIVE_STEP_SMOOTHING +#define ADAPTIVE_STEP_SMOOTHING /** * Custom Microstepping @@ -1147,15 +1149,15 @@ // Change values more rapidly when the encoder is rotated faster #define ENCODER_RATE_MULTIPLIER #if ENABLED(ENCODER_RATE_MULTIPLIER) - #define ENCODER_10X_STEPS_PER_SEC 30 // (steps/s) Encoder rate for 10x speed + #define ENCODER_10X_STEPS_PER_SEC 40 // (steps/s) Encoder rate for 10x speed #define ENCODER_100X_STEPS_PER_SEC 80 // (steps/s) Encoder rate for 100x speed #endif // Play a beep when the feedrate is changed from the Status Screen -//#define BEEP_ON_FEEDRATE_CHANGE +#define BEEP_ON_FEEDRATE_CHANGE #if ENABLED(BEEP_ON_FEEDRATE_CHANGE) #define FEEDRATE_CHANGE_BEEP_DURATION 10 - #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 + #define FEEDRATE_CHANGE_BEEP_FREQUENCY 50 #endif #if HAS_LCD_MENU @@ -1177,13 +1179,13 @@ #endif // Include a page of printer information in the LCD Main Menu - //#define LCD_INFO_MENU + #define LCD_INFO_MENU #if ENABLED(LCD_INFO_MENU) //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages #endif // BACK menu items keep the highlight at the top - //#define TURBO_BACK_MENU_ITEM + #define TURBO_BACK_MENU_ITEM // Add a mute option to the LCD menu //#define SOUND_MENU_ITEM @@ -1221,7 +1223,7 @@ #if HAS_DISPLAY // The timeout (in ms) to return to the status screen from sub-menus - //#define LCD_TIMEOUT_TO_STATUS 15000 + #define LCD_TIMEOUT_TO_STATUS 60000 #if ENABLED(SHOW_BOOTSCREEN) #define BOOTSCREEN_TIMEOUT 4000 // (ms) Total Duration to display the boot screen(s) @@ -1231,34 +1233,34 @@ #endif // Scroll a longer status message into view - //#define STATUS_MESSAGE_SCROLLING + #define STATUS_MESSAGE_SCROLLING // On the Info Screen, display XY with one decimal place when possible - //#define LCD_DECIMAL_SMALL_XY + #define LCD_DECIMAL_SMALL_XY // Add an 'M73' G-code to set the current percentage - //#define LCD_SET_PROGRESS_MANUALLY + #define LCD_SET_PROGRESS_MANUALLY // Show the E position (filament used) during printing - //#define LCD_SHOW_E_TOTAL + #define LCD_SHOW_E_TOTAL #endif #if EITHER(SDSUPPORT, LCD_SET_PROGRESS_MANUALLY) && ANY(HAS_MARLINUI_U8GLIB, HAS_MARLINUI_HD44780, IS_TFTGLCD_PANEL, EXTENSIBLE_UI) - //#define SHOW_REMAINING_TIME // Display estimated time to completion + #define SHOW_REMAINING_TIME // Display estimated time to completion #if ENABLED(SHOW_REMAINING_TIME) - //#define USE_M73_REMAINING_TIME // Use remaining time from M73 command instead of estimation - //#define ROTATE_PROGRESS_DISPLAY // Display (P)rogress, (E)lapsed, and (R)emaining time + #define USE_M73_REMAINING_TIME // Use remaining time from M73 command instead of estimation + #define ROTATE_PROGRESS_DISPLAY // Display (P)rogress, (E)lapsed, and (R)emaining time #endif #if EITHER(HAS_MARLINUI_U8GLIB, EXTENSIBLE_UI) - //#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits + #define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits #endif #if EITHER(HAS_MARLINUI_HD44780, IS_TFTGLCD_PANEL) - //#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing + #define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing #if ENABLED(LCD_PROGRESS_BAR) - #define PROGRESS_BAR_BAR_TIME 2000 // (ms) Amount of time to show the bar - #define PROGRESS_BAR_MSG_TIME 3000 // (ms) Amount of time to show the status message + #define PROGRESS_BAR_BAR_TIME 5000 // (ms) Amount of time to show the bar + #define PROGRESS_BAR_MSG_TIME 3500 // (ms) Amount of time to show the status message #define PROGRESS_MSG_EXPIRE 0 // (ms) Amount of time to retain the status message (0=forever) //#define PROGRESS_MSG_ONCE // Show the message for MSG_TIME then clear it //#define LCD_PROGRESS_BAR_TEST // Add a menu item to test the progress bar @@ -1289,8 +1291,8 @@ #define SD_PROCEDURE_DEPTH 1 // Increase if you need more nested M32 calls - #define SD_FINISHED_STEPPERRELEASE true // Disable steppers when SD Print is finished - #define SD_FINISHED_RELEASECOMMAND "M84" // Use "M84XYE" to keep Z enabled so your bed stays in place + #define SD_FINISHED_STEPPERRELEASE true // Disable steppers when SD Print is finished + #define SD_FINISHED_RELEASECOMMAND "M84 E" // Use "M84XYE" to keep Z enabled so your bed stays in place // Reverse SD sort to show "more recent" files first, according to the card's FAT. // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended. @@ -1299,11 +1301,11 @@ #define SD_MENU_CONFIRM_START // Confirm the selected SD file before printing //#define NO_SD_AUTOSTART // Remove auto#.g file support completely to save some Flash, SRAM - //#define MENU_ADDAUTOSTART // Add a menu option to run auto#.g files + #define MENU_ADDAUTOSTART // Add a menu option to run auto#.g files //#define BROWSE_MEDIA_ON_INSERT // Open the file browser when media is inserted - #define EVENT_GCODE_SD_ABORT "G28" // G-code to run on SD Abort Print (e.g., "G28XY" or "G27") + #define EVENT_GCODE_SD_ABORT "G27" // G-code to run on SD Abort Print (e.g., "G28XY" or "G27") #if ENABLED(PRINTER_EVENT_LEDS) #define PE_LEDS_COMPLETED_TIME (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination @@ -1386,7 +1388,7 @@ //#define LONG_FILENAME_HOST_SUPPORT // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES + #define SCROLL_LONG_FILENAMES // Leave the heaters on after Stop Print (not recommended!) //#define SD_ABORT_NO_COOLDOWN @@ -1408,7 +1410,7 @@ /** * Auto-report SdCard status with M27 S */ - //#define AUTO_REPORT_SD_STATUS + #define AUTO_REPORT_SD_STATUS /** * Support for USB thumb drives using an Arduino USB Host Shield or @@ -1514,7 +1516,7 @@ */ #if HAS_MARLINUI_U8GLIB // Show SD percentage next to the progress bar - //#define DOGM_SD_PERCENT + #define DOGM_SD_PERCENT // Save many cycles by drawing a hollow frame or no frame on the Info Screen //#define XYZ_NO_FRAME @@ -1792,20 +1794,20 @@ * * Warning: Does not respect endstops! */ -//#define BABYSTEPPING +#define BABYSTEPPING #if ENABLED(BABYSTEPPING) //#define INTEGRATED_BABYSTEPPING // EXPERIMENTAL integration of babystepping into the Stepper ISR //#define BABYSTEP_WITHOUT_HOMING - //#define BABYSTEP_ALWAYS_AVAILABLE // Allow babystepping at all times (not just during movement). + #define BABYSTEP_ALWAYS_AVAILABLE // Allow babystepping at all times (not just during movement). //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way //#define BABYSTEP_MILLIMETER_UNITS // Specify BABYSTEP_MULTIPLICATOR_(XY|Z) in mm instead of micro-steps #define BABYSTEP_MULTIPLICATOR_Z 1 // (steps or mm) Steps or millimeter distance for each Z babystep #define BABYSTEP_MULTIPLICATOR_XY 1 // (steps or mm) Steps or millimeter distance for each XY babystep - //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. + #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 2000 // Maximum interval between clicks, in milliseconds. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on doubleclick when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) @@ -1839,12 +1841,12 @@ * * See https://marlinfw.org/docs/features/lin_advance.html for full instructions. */ -//#define LIN_ADVANCE +#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants - #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed + #define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants + #define LIN_ADVANCE_K 0 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // If enabled, this will generate debug information output over USB. - //#define EXPERIMENTAL_SCURVE // Enable this option to permit S-Curve Acceleration + #define EXPERIMENTAL_SCURVE // Enable this option to permit S-Curve Acceleration #endif // @section leveling @@ -1984,7 +1986,7 @@ // // G2/G3 Arc Support // -#define ARC_SUPPORT // Disable this feature to save ~3226 bytes +//#define ARC_SUPPORT // Disable this feature to save ~3226 bytes #if ENABLED(ARC_SUPPORT) #define MM_PER_ARC_SEGMENT 1 // (mm) Length (or minimum length) of each arc segment //#define ARC_SEGMENTS_PER_R 1 // Max segment length, MM_PER = Min @@ -2143,7 +2145,7 @@ * Currently handles M108, M112, M410, M876 * NOTE: Not yet implemented for all platforms. */ -//#define EMERGENCY_PARSER +#define EMERGENCY_PARSER /** * Realtime Reporting (requires EMERGENCY_PARSER) @@ -2172,7 +2174,7 @@ //#define NO_TIMEOUTS 1000 // Milliseconds // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. -//#define ADVANCED_OK +#define ADVANCED_OK // Printrun may have trouble receiving long strings all at once. // This option inserts short delays between lines of serial output. @@ -2313,7 +2315,7 @@ * * Enable PARK_HEAD_ON_PAUSE to add the G-code M125 Pause and Park. */ -//#define ADVANCED_PAUSE_FEATURE +#define ADVANCED_PAUSE_FEATURE #if ENABLED(ADVANCED_PAUSE_FEATURE) #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. @@ -2351,11 +2353,11 @@ #define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed. #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change. - //#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. - //#define HOME_BEFORE_FILAMENT_CHANGE // If needed, home before parking for filament change + #define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. + #define HOME_BEFORE_FILAMENT_CHANGE // If needed, home before parking for filament change - //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. - //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) + #define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. + #define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) #endif // @section tmc @@ -3441,7 +3443,7 @@ /** * Disable all Volumetric extrusion options */ -//#define NO_VOLUMETRICS +#define NO_VOLUMETRICS #if DISABLED(NO_VOLUMETRICS) /** @@ -3473,10 +3475,10 @@ * - M206 and M428 are disabled. * - G92 will revert to its behavior from Marlin 1.0. */ -//#define NO_WORKSPACE_OFFSETS +#define NO_WORKSPACE_OFFSETS // Extra options for the M114 "Current Position" report -//#define M114_DETAIL // Use 'M114` for details to check planner calculations +#define M114_DETAIL // Use 'M114` for details to check planner calculations //#define M114_REALTIME // Real current position based on forward kinematics //#define M114_LEGACY // M114 used to synchronize on every call. Enable if needed. @@ -3536,7 +3538,7 @@ * Add G-codes M810-M819 to define and run G-code macros. * Macros are not saved to EEPROM. */ -//#define GCODE_MACROS +#define GCODE_MACROS #if ENABLED(GCODE_MACROS) #define GCODE_MACROS_SLOTS 5 // Up to 10 may be used #define GCODE_MACROS_SLOT_SIZE 50 // Maximum length of a single macro @@ -3550,7 +3552,7 @@ // Custom Menu: Main Menu //#define CUSTOM_MENU_MAIN #if ENABLED(CUSTOM_MENU_MAIN) - //#define CUSTOM_MENU_MAIN_TITLE "Custom Commands" + #define CUSTOM_MENU_MAIN_TITLE "Custom Commands" #define CUSTOM_MENU_MAIN_SCRIPT_DONE "M117 User Script Done" #define CUSTOM_MENU_MAIN_SCRIPT_AUDIBLE_FEEDBACK //#define CUSTOM_MENU_MAIN_SCRIPT_RETURN // Return to status screen after a script @@ -3564,16 +3566,16 @@ #define MAIN_MENU_ITEM_2_GCODE "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND) //#define MAIN_MENU_ITEM_2_CONFIRM - //#define MAIN_MENU_ITEM_3_DESC "Preheat for " PREHEAT_2_LABEL - //#define MAIN_MENU_ITEM_3_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) + #define MAIN_MENU_ITEM_3_DESC "Preheat for " PREHEAT_2_LABEL + #define MAIN_MENU_ITEM_3_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) //#define MAIN_MENU_ITEM_3_CONFIRM - //#define MAIN_MENU_ITEM_4_DESC "Heat Bed/Home/Level" - //#define MAIN_MENU_ITEM_4_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29" + #define MAIN_MENU_ITEM_4_DESC "Heat Bed/Home/Level" + #define MAIN_MENU_ITEM_4_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29" //#define MAIN_MENU_ITEM_4_CONFIRM - //#define MAIN_MENU_ITEM_5_DESC "Home & Info" - //#define MAIN_MENU_ITEM_5_GCODE "G28\nM503" + #define MAIN_MENU_ITEM_5_DESC "Home & Info" + #define MAIN_MENU_ITEM_5_GCODE "G28\nM503" //#define MAIN_MENU_ITEM_5_CONFIRM #endif @@ -3652,9 +3654,9 @@ * Host Prompt Support enables Marlin to use the host for user prompts so * filament runout and other processes can be managed from the host side. */ -//#define HOST_ACTION_COMMANDS +#define HOST_ACTION_COMMANDS #if ENABLED(HOST_ACTION_COMMANDS) - //#define HOST_PROMPT_SUPPORT + #define HOST_PROMPT_SUPPORT //#define HOST_START_MENU_ITEM // Add a menu item that tells the host to start #endif @@ -3663,10 +3665,7 @@ * * Implement M486 to allow Marlin to skip objects */ -//#define CANCEL_OBJECTS -#if ENABLED(CANCEL_OBJECTS) - #define CANCEL_OBJECTS_REPORTING // Emit the current object as a status message -#endif +#define CANCEL_OBJECTS /** * I2C position encoders for closed loop control. diff --git a/config/examples/delta/Geeetech/G2Pro/Configuration.h b/config/examples/delta/Geeetech/G2Pro/Configuration.h index 464282b015..72b603782d 100644 --- a/config/examples/delta/Geeetech/G2Pro/Configuration.h +++ b/config/examples/delta/Geeetech/G2Pro/Configuration.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "delta/Geeetech/G2Pro" + /** * Configuration.h * @@ -134,11 +136,11 @@ // Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_RAMPS_14_EFB + #define MOTHERBOARD BOARD_GT2560_REV_A_PLUS #endif // Name displayed in the LCD "Ready" message and Info menu -#define CUSTOM_MACHINE_NAME "Deltabot" +#define CUSTOM_MACHINE_NAME "3D Printer" // Printer's unique ID, used by some programs to differentiate between machines. // Choose your own or use a service like https://www.uuidgenerator.net/version4 @@ -319,7 +321,7 @@ * Specify whether the power supply is active HIGH or active LOW. */ #define PSU_CONTROL -//#define PSU_NAME "Power Supply" +#define PSU_NAME "Power Supply" #if ENABLED(PSU_CONTROL) #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box @@ -416,15 +418,15 @@ * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. */ -#define TEMP_SENSOR_0 -1 -#define TEMP_SENSOR_1 0 +#define TEMP_SENSOR_0 1 +#define TEMP_SENSOR_1 0 // G2S 1 #define TEMP_SENSOR_2 0 #define TEMP_SENSOR_3 0 #define TEMP_SENSOR_4 0 #define TEMP_SENSOR_5 0 #define TEMP_SENSOR_6 0 #define TEMP_SENSOR_7 0 -#define TEMP_SENSOR_BED 0 +#define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 #define TEMP_SENSOR_COOLER 0 @@ -448,7 +450,7 @@ #define TEMP_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer #define TEMP_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target -#define TEMP_BED_RESIDENCY_TIME 0 // (seconds) Time to wait for bed to "settle" in M190 +#define TEMP_BED_RESIDENCY_TIME 10 // (seconds) Time to wait for bed to "settle" in M190 #define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer #define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target @@ -505,8 +507,8 @@ #define PID_K1 0.95 // Smoothing factor within any PID loop #if ENABLED(PIDTEMP) - //#define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) - //#define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) + #define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) + #define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) // Set/get with gcode: M301 E[extruder number, 0-2] @@ -685,24 +687,22 @@ // Make delta curves from many straight lines (linear interpolation). // This is a trade-off between visible corners (not enough segments) // and processor overload (too many expensive sqrt calls). - #define DELTA_SEGMENTS_PER_SECOND 200 + #define DELTA_SEGMENTS_PER_SECOND 160 // After homing move down to a height where XY movement is unconstrained - //#define DELTA_HOME_TO_SAFE_ZONE + #define DELTA_HOME_TO_SAFE_ZONE // Delta calibration menu // uncomment to add three points calibration menu option. // See http://minow.blogspot.com/index.html#4918805519571907051 - //#define DELTA_CALIBRATION_MENU + #define DELTA_CALIBRATION_MENU // uncomment to add G33 Delta Auto-Calibration (Enable EEPROM_SETTINGS to store results) - //#define DELTA_AUTO_CALIBRATION - - // NOTE NB all values for DELTA_* values MUST be floating point, so always have a decimal point in them + #define DELTA_AUTO_CALIBRATION #if ENABLED(DELTA_AUTO_CALIBRATION) // set the default number of probe points : n*n (1 -> 7) - #define DELTA_CALIBRATION_DEFAULT_POINTS 4 + #define DELTA_CALIBRATION_DEFAULT_POINTS 2 #endif #if EITHER(DELTA_AUTO_CALIBRATION, DELTA_CALIBRATION_MENU) @@ -711,23 +711,23 @@ #endif // Print surface diameter/2 minus unreachable space (avoid collisions with vertical towers). - #define DELTA_PRINTABLE_RADIUS 140.0 // (mm) + #define DELTA_PRINTABLE_RADIUS 90.0 // (mm) // Center-to-center distance of the holes in the diagonal push rods. - #define DELTA_DIAGONAL_ROD 250.0 // (mm) + #define DELTA_DIAGONAL_ROD 196.0 // (mm) // Distance between bed and nozzle Z home position - #define DELTA_HEIGHT 250.00 // (mm) Get this value from G33 auto calibrate + #define DELTA_HEIGHT 200 // (mm) Get this value from G33 auto calibrate #define DELTA_ENDSTOP_ADJ { 0.0, 0.0, 0.0 } // Get these values from G33 auto calibrate // Horizontal distance bridged by diagonal push rods when effector is centered. - #define DELTA_RADIUS 124.0 // (mm) Get this value from G33 auto calibrate + #define DELTA_RADIUS 92.0 // (mm) Get this value from G33 auto calibrate // Trim adjustments for individual towers // tower angle corrections for X and Y tower / rotate XYZ so Z tower angle = 0 // measured in degrees anticlockwise looking from above the printer - #define DELTA_TOWER_ANGLE_TRIM { 0.0, 0.0, 0.0 } // Get these values from G33 auto calibrate + #define DELTA_TOWER_ANGLE_TRIM { 0.70, 0.05, -0.74 } // Get these values from G33 auto calibrate // Delta radius and diagonal rod adjustments (mm) //#define DELTA_RADIUS_TRIM_TOWER { 0.0, 0.0, 0.0 } @@ -778,13 +778,13 @@ #endif // Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define X_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Y_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Z_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Z_MIN_PROBE_ENDSTOP_INVERTING true // Set to true to invert the logic of the probe. +#define X_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. +#define Y_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. +#define Z_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. // G2 false +#define X_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. +#define Y_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. +#define Z_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. +#define Z_MIN_PROBE_ENDSTOP_INVERTING Z_MIN_ENDSTOP_INVERTING // Set to true to invert the logic of the probe. /** * Stepper Drivers @@ -813,7 +813,7 @@ //#define Z3_DRIVER_TYPE A4988 //#define Z4_DRIVER_TYPE A4988 #define E0_DRIVER_TYPE A4988 -//#define E1_DRIVER_TYPE A4988 +#define E1_DRIVER_TYPE A4988 //#define E2_DRIVER_TYPE A4988 //#define E3_DRIVER_TYPE A4988 //#define E4_DRIVER_TYPE A4988 @@ -837,7 +837,7 @@ * * :[2,3,4,5,6,7] */ -//#define ENDSTOP_NOISE_THRESHOLD 2 +#define ENDSTOP_NOISE_THRESHOLD 2 // Check for stuck or disconnected endstops during homing moves. //#define DETECT_BROKEN_ENDSTOP @@ -861,7 +861,7 @@ * following movement settings. If fewer factors are given than the * total number of extruders, the last value applies to the rest. */ -//#define DISTINCT_E_FACTORS +#define DISTINCT_E_FACTORS /** * Default Axis Steps Per Unit (steps/mm) @@ -876,18 +876,18 @@ // delta speeds must be the same on xyz #define DEFAULT_XYZ_STEPS_PER_UNIT ((XYZ_FULL_STEPS_PER_ROTATION) * (XYZ_MICROSTEPS) / double(XYZ_BELT_PITCH) / double(XYZ_PULLEY_TEETH)) -#define DEFAULT_AXIS_STEPS_PER_UNIT { DEFAULT_XYZ_STEPS_PER_UNIT, DEFAULT_XYZ_STEPS_PER_UNIT, DEFAULT_XYZ_STEPS_PER_UNIT, 760*1.1 } // default steps per unit for Kossel (GT2, 20 tooth) +#define DEFAULT_AXIS_STEPS_PER_UNIT { DEFAULT_XYZ_STEPS_PER_UNIT, DEFAULT_XYZ_STEPS_PER_UNIT, DEFAULT_XYZ_STEPS_PER_UNIT, 100 } // default steps per unit for Kossel (GT2, 20 tooth) /** * Default Max Feed Rate (mm/s) * Override with M203 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_FEEDRATE { 500, 500, 500, 25 } +#define DEFAULT_MAX_FEEDRATE { 200, 200, 200, 25 } //#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 #if ENABLED(LIMITED_MAX_FR_EDITING) - #define MAX_FEEDRATE_EDIT_VALUES { 600, 600, 10, 50 } // ...or, set your own edit limits + #define MAX_FEEDRATE_EDIT_VALUES { 600, 600, 600, 50 } // ...or, set your own edit limits #endif /** @@ -896,7 +896,7 @@ * Override with M201 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_ACCELERATION { 9000, 9000, 9000, 10000 } +#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 3000, 10000 } //#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 #if ENABLED(LIMITED_MAX_ACCEL_EDITING) @@ -911,9 +911,9 @@ * M204 R Retract Acceleration * M204 T Travel Acceleration */ -#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves +#define DEFAULT_ACCELERATION 1000 // X, Y, Z and E acceleration for printing moves +#define DEFAULT_RETRACT_ACCELERATION 1000 // E acceleration for retracts +#define DEFAULT_TRAVEL_ACCELERATION 1000 // X, Y, Z acceleration for travel (non printing) moves /** * Default Jerk limits (mm/s) @@ -925,7 +925,7 @@ */ #define CLASSIC_JERK #if ENABLED(CLASSIC_JERK) - #define DEFAULT_XJERK 10.0 + #define DEFAULT_XJERK 8.0 #define DEFAULT_YJERK DEFAULT_XJERK #define DEFAULT_ZJERK DEFAULT_XJERK // Must be same as XY for delta @@ -960,7 +960,7 @@ * * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained */ -//#define S_CURVE_ACCELERATION +#define S_CURVE_ACCELERATION //=========================================================================== //============================= Z Probe Options ============================= @@ -1085,7 +1085,7 @@ * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. Uses Z_MIN_PIN. */ -//#define Z_PROBE_ALLEN_KEY +#define Z_PROBE_ALLEN_KEY #if ENABLED(Z_PROBE_ALLEN_KEY) // 2 or 3 sets of coordinates for deploying and retracting the spring loaded touch probe on G29, @@ -1154,17 +1154,17 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 0, -10, -3.5 } +#define NOZZLE_TO_PROBE_OFFSET { -19, -11, -2 } // G2 { 19, -11, -2 } // Most probes should stay away from the edges of the bed, but // with NOZZLE_AS_PROBE this can be negative for a wider probing area. -#define PROBING_MARGIN 10 +#define PROBING_MARGIN 1 // X and Y axis travel speed (mm/min) between probes -#define XY_PROBE_FEEDRATE (66*60) +#define XY_PROBE_FEEDRATE HOMING_FEEDRATE_Z // Feedrate (mm/min) for the first approach when double-probing (MULTIPLE_PROBING == 2) -#define Z_PROBE_FEEDRATE_FAST (200*60) +#define Z_PROBE_FEEDRATE_FAST (60*60) // Feedrate (mm/min) for the "accurate" probe of each point #define Z_PROBE_FEEDRATE_SLOW (Z_PROBE_FEEDRATE_FAST / 2) @@ -1222,7 +1222,7 @@ * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. */ -#define Z_CLEARANCE_DEPLOY_PROBE 15 // Z Clearance for Deploy/Stow +#define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow #define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points #define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes //#define Z_AFTER_PROBING 5 // Z position after probing is done @@ -1289,21 +1289,21 @@ // @section machine // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR false -#define INVERT_Y_DIR false -#define INVERT_Z_DIR false +#define INVERT_X_DIR true +#define INVERT_Y_DIR true +#define INVERT_Z_DIR true // @section extruder // For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR false -#define INVERT_E1_DIR false -#define INVERT_E2_DIR false -#define INVERT_E3_DIR false -#define INVERT_E4_DIR false -#define INVERT_E5_DIR false -#define INVERT_E6_DIR false -#define INVERT_E7_DIR false +#define INVERT_E0_DIR true +#define INVERT_E1_DIR true +#define INVERT_E2_DIR true +#define INVERT_E3_DIR true +#define INVERT_E4_DIR true +#define INVERT_E5_DIR true +#define INVERT_E6_DIR true +#define INVERT_E7_DIR true // @section homing @@ -1317,7 +1317,7 @@ */ //#define Z_IDLE_HEIGHT Z_HOME_POS -//#define Z_HOMING_HEIGHT 4 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ... +#define Z_HOMING_HEIGHT 4 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ... // Be sure to have this much clearance over your Z_MAX_POS to prevent grinding. //#define Z_AFTER_HOMING 10 // (mm) Height to move to after homing Z @@ -1368,7 +1368,7 @@ #endif #if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS) - //#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD + #define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD #endif /** @@ -1487,7 +1487,7 @@ //#define AUTO_BED_LEVELING_3POINT //#define AUTO_BED_LEVELING_LINEAR //#define AUTO_BED_LEVELING_BILINEAR -//#define AUTO_BED_LEVELING_UBL +#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING /** @@ -1495,7 +1495,7 @@ * these options to restore the prior leveling state or to always enable * leveling immediately after G28. */ -//#define RESTORE_LEVELING_AFTER_G28 +#define RESTORE_LEVELING_AFTER_G28 //#define ENABLE_LEVELING_AFTER_G28 /** @@ -1554,7 +1554,7 @@ // Set the number of grid points per dimension. // Works best with 5 or more points in each dimension. - #define GRID_MAX_POINTS_X 9 + #define GRID_MAX_POINTS_X 5 #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X // Probe along the Y axis, advancing X after each column @@ -1587,7 +1587,7 @@ //#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh #define MESH_INSET 1 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. + #define GRID_MAX_POINTS_X 5 // Don't use more than 15 points per axis, implementation limited. #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X //#define UBL_HILBERT_CURVE // Use Hilbert distribution for less travel when probing multiple points @@ -1595,7 +1595,7 @@ #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 - //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used + #define UBL_Z_RAISE_WHEN_OFF_MESH 0 // When the nozzle is off the mesh, this value is used // as the Z-Height correction value. //#define UBL_MESH_WIZARD // Run several commands in a row to get a complete mesh @@ -1606,7 +1606,7 @@ //=================================== Mesh ================================== //=========================================================================== - #define MESH_INSET 10 // Set Mesh bounds as an inset region of the bed + #define MESH_INSET 1 // Set Mesh bounds as an inset region of the bed #define GRID_MAX_POINTS_X 3 // Don't use more than 7 points per axis, implementation limited. #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X @@ -1633,7 +1633,7 @@ #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner + #define LEVEL_CENTER_TOO // Move to the center after the last corner //#define LEVEL_CORNERS_USE_PROBE #if ENABLED(LEVEL_CORNERS_USE_PROBE) #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 @@ -1694,8 +1694,9 @@ #define Z_SAFE_HOMING_Y_POINT Y_CENTER // Y point for Z homing #endif -// Delta only homes to Z -#define HOMING_FEEDRATE_MM_M { (200*60), (200*60), (200*60) } +// Homing speeds (mm/min) +#define HOMING_FEEDRATE_Z (60*60) +#define HOMING_FEEDRATE_MM_M { HOMING_FEEDRATE_Z, HOMING_FEEDRATE_Z, HOMING_FEEDRATE_Z } // Validate that endstops are triggered on homing moves #define VALIDATE_HOMING_ENDSTOPS @@ -1772,12 +1773,12 @@ * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) */ -//#define EEPROM_SETTINGS // Persistent storage with M500 and M501 +#define EEPROM_SETTINGS // Persistent storage with M500 and M501 //#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. #define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load #if ENABLED(EEPROM_SETTINGS) - //#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. + #define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. #endif // @@ -1806,16 +1807,16 @@ // Preheat Constants - Up to 5 are supported without changes // #define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 180 -#define PREHEAT_1_TEMP_BED 70 +#define PREHEAT_1_TEMP_HOTEND 200 +#define PREHEAT_1_TEMP_BED 60 #define PREHEAT_1_TEMP_CHAMBER 35 -#define PREHEAT_1_FAN_SPEED 255 // Value from 0 to 255 +#define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 #define PREHEAT_2_LABEL "ABS" -#define PREHEAT_2_TEMP_HOTEND 240 +#define PREHEAT_2_TEMP_HOTEND 250 #define PREHEAT_2_TEMP_BED 100 #define PREHEAT_2_TEMP_CHAMBER 35 -#define PREHEAT_2_FAN_SPEED 255 // Value from 0 to 255 +#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 /** * Nozzle Park @@ -1828,11 +1829,11 @@ * P1 Raise the nozzle always to Z-park height. * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. */ -//#define NOZZLE_PARK_FEATURE +#define NOZZLE_PARK_FEATURE #if ENABLED(NOZZLE_PARK_FEATURE) // Specify a park position as { X, Y, Z_raise } - #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), 0, 20 } + #define NOZZLE_PARK_POINT { 0, 0, 20 } //#define NOZZLE_PARK_X_ONLY // X move only is required to park //#define NOZZLE_PARK_Y_ONLY // Y move only is required to park #define NOZZLE_PARK_Z_RAISE_MIN 2 // (mm) Always raise Z by at least this distance @@ -2036,7 +2037,7 @@ * SD Card support is disabled by default. If your controller has an SD slot, * you must uncomment the following option or it won't work. */ -//#define SDSUPPORT +#define SDSUPPORT /** * SD CARD: ENABLE CRC @@ -2114,7 +2115,7 @@ // If you have a speaker that can produce tones, enable it here. // By default Marlin assumes you have a buzzer with a fixed frequency. // -//#define SPEAKER +#define SPEAKER // // The duration and frequency for the UI feedback sound. @@ -2123,8 +2124,8 @@ // Note: Test audio output with the G-Code: // M300 S P // -//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 -//#define LCD_FEEDBACK_FREQUENCY_HZ 5000 +#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 10 +#define LCD_FEEDBACK_FREQUENCY_HZ 50 //============================================================================= //======================== LCD / Controller Selection ========================= @@ -2137,7 +2138,7 @@ // // Note: Usually sold with a white PCB. // -//#define REPRAP_DISCOUNT_SMART_CONTROLLER +#define REPRAP_DISCOUNT_SMART_CONTROLLER // // GT2560 (YHCB2004) LCD Display @@ -2718,7 +2719,7 @@ // Use software PWM to drive the fan, as for the heaters. This uses a very low frequency // which is not as annoying as with the hardware PWM. On the other hand, if this frequency // is too low, you should also increment SOFT_PWM_SCALE. -//#define FAN_SOFT_PWM +#define FAN_SOFT_PWM // Incrementing this by 1 will double the software PWM frequency, // affecting heaters, and the fan if FAN_SOFT_PWM is enabled. diff --git a/config/examples/delta/Geeetech/G2Pro/Configuration_adv.h b/config/examples/delta/Geeetech/G2Pro/Configuration_adv.h index aa6bbae7e4..fff2557b7d 100644 --- a/config/examples/delta/Geeetech/G2Pro/Configuration_adv.h +++ b/config/examples/delta/Geeetech/G2Pro/Configuration_adv.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "delta/Geeetech/G2Pro" + /** * Configuration_adv.h * @@ -307,7 +309,7 @@ #if ENABLED(PIDTEMP) // Add an experimental additional term to the heater power, proportional to the extrusion speed. // A well-chosen Kc value should add just enough power to melt the increased material volume. - //#define PID_EXTRUSION_SCALING + #define PID_EXTRUSION_SCALING #if ENABLED(PID_EXTRUSION_SCALING) #define DEFAULT_Kc (100) // heating power = Kc * e_speed #define LPQ_MAX_LEN 50 @@ -391,7 +393,7 @@ // Show Temperature ADC value // Enable for M105 to include ADC values read from temperature sensors. -//#define SHOW_TEMP_ADC_VALUES +#define SHOW_TEMP_ADC_VALUES /** * High Temperature Thermistor Support @@ -411,14 +413,14 @@ // The number of consecutive low temperature errors that can occur // before a min_temp_error is triggered. (Shouldn't be more than 10.) -//#define MAX_CONSECUTIVE_LOW_TEMPERATURE_ERROR_ALLOWED 0 +#define MAX_CONSECUTIVE_LOW_TEMPERATURE_ERROR_ALLOWED 10 // The number of milliseconds a hotend will preheat before starting to check // the temperature. This value should NOT be set to the time it takes the // hot end to reach the target temperature, but the time it takes to reach // the minimum temperature your thermistor can read. The lower the better/safer. // This shouldn't need to be more than 30 seconds (30000) -//#define MILLISECONDS_PREHEAT_TIME 0 +#define MILLISECONDS_PREHEAT_TIME 30000 // @section extruder @@ -496,7 +498,7 @@ * * Define one or both of these to override the default 0-255 range. */ -//#define FAN_MIN_PWM 50 +#define FAN_MIN_PWM 50 //#define FAN_MAX_PWM 128 /** @@ -927,9 +929,9 @@ * The Deactive Time can be overridden with M18 and M84. Set to 0 for No Timeout. */ #define DEFAULT_STEPPER_DEACTIVE_TIME 60 -#define DISABLE_INACTIVE_X true -#define DISABLE_INACTIVE_Y true -#define DISABLE_INACTIVE_Z true // Set 'false' if the nozzle could fall onto your printed part! +#define DISABLE_INACTIVE_X false +#define DISABLE_INACTIVE_Y false +#define DISABLE_INACTIVE_Z false // Set 'false' if the nozzle could fall onto your printed part! #define DISABLE_INACTIVE_E true // Default Minimum Feedrates for printing and travel moves @@ -1060,7 +1062,7 @@ * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the * lowest stepping frequencies. */ -//#define ADAPTIVE_STEP_SMOOTHING +#define ADAPTIVE_STEP_SMOOTHING /** * Custom Microstepping @@ -1147,15 +1149,15 @@ // Change values more rapidly when the encoder is rotated faster #define ENCODER_RATE_MULTIPLIER #if ENABLED(ENCODER_RATE_MULTIPLIER) - #define ENCODER_10X_STEPS_PER_SEC 30 // (steps/s) Encoder rate for 10x speed + #define ENCODER_10X_STEPS_PER_SEC 40 // (steps/s) Encoder rate for 10x speed #define ENCODER_100X_STEPS_PER_SEC 80 // (steps/s) Encoder rate for 100x speed #endif // Play a beep when the feedrate is changed from the Status Screen -//#define BEEP_ON_FEEDRATE_CHANGE +#define BEEP_ON_FEEDRATE_CHANGE #if ENABLED(BEEP_ON_FEEDRATE_CHANGE) #define FEEDRATE_CHANGE_BEEP_DURATION 10 - #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 + #define FEEDRATE_CHANGE_BEEP_FREQUENCY 50 #endif #if HAS_LCD_MENU @@ -1177,13 +1179,13 @@ #endif // Include a page of printer information in the LCD Main Menu - //#define LCD_INFO_MENU + #define LCD_INFO_MENU #if ENABLED(LCD_INFO_MENU) //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages #endif // BACK menu items keep the highlight at the top - //#define TURBO_BACK_MENU_ITEM + #define TURBO_BACK_MENU_ITEM // Add a mute option to the LCD menu //#define SOUND_MENU_ITEM @@ -1221,7 +1223,7 @@ #if HAS_DISPLAY // The timeout (in ms) to return to the status screen from sub-menus - //#define LCD_TIMEOUT_TO_STATUS 15000 + #define LCD_TIMEOUT_TO_STATUS 60000 #if ENABLED(SHOW_BOOTSCREEN) #define BOOTSCREEN_TIMEOUT 4000 // (ms) Total Duration to display the boot screen(s) @@ -1231,34 +1233,34 @@ #endif // Scroll a longer status message into view - //#define STATUS_MESSAGE_SCROLLING + #define STATUS_MESSAGE_SCROLLING // On the Info Screen, display XY with one decimal place when possible - //#define LCD_DECIMAL_SMALL_XY + #define LCD_DECIMAL_SMALL_XY // Add an 'M73' G-code to set the current percentage - //#define LCD_SET_PROGRESS_MANUALLY + #define LCD_SET_PROGRESS_MANUALLY // Show the E position (filament used) during printing - //#define LCD_SHOW_E_TOTAL + #define LCD_SHOW_E_TOTAL #endif #if EITHER(SDSUPPORT, LCD_SET_PROGRESS_MANUALLY) && ANY(HAS_MARLINUI_U8GLIB, HAS_MARLINUI_HD44780, IS_TFTGLCD_PANEL, EXTENSIBLE_UI) - //#define SHOW_REMAINING_TIME // Display estimated time to completion + #define SHOW_REMAINING_TIME // Display estimated time to completion #if ENABLED(SHOW_REMAINING_TIME) - //#define USE_M73_REMAINING_TIME // Use remaining time from M73 command instead of estimation - //#define ROTATE_PROGRESS_DISPLAY // Display (P)rogress, (E)lapsed, and (R)emaining time + #define USE_M73_REMAINING_TIME // Use remaining time from M73 command instead of estimation + #define ROTATE_PROGRESS_DISPLAY // Display (P)rogress, (E)lapsed, and (R)emaining time #endif #if EITHER(HAS_MARLINUI_U8GLIB, EXTENSIBLE_UI) - //#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits + #define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits #endif #if EITHER(HAS_MARLINUI_HD44780, IS_TFTGLCD_PANEL) - //#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing + #define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing #if ENABLED(LCD_PROGRESS_BAR) - #define PROGRESS_BAR_BAR_TIME 2000 // (ms) Amount of time to show the bar - #define PROGRESS_BAR_MSG_TIME 3000 // (ms) Amount of time to show the status message + #define PROGRESS_BAR_BAR_TIME 5000 // (ms) Amount of time to show the bar + #define PROGRESS_BAR_MSG_TIME 3500 // (ms) Amount of time to show the status message #define PROGRESS_MSG_EXPIRE 0 // (ms) Amount of time to retain the status message (0=forever) //#define PROGRESS_MSG_ONCE // Show the message for MSG_TIME then clear it //#define LCD_PROGRESS_BAR_TEST // Add a menu item to test the progress bar @@ -1289,8 +1291,8 @@ #define SD_PROCEDURE_DEPTH 1 // Increase if you need more nested M32 calls - #define SD_FINISHED_STEPPERRELEASE true // Disable steppers when SD Print is finished - #define SD_FINISHED_RELEASECOMMAND "M84" // Use "M84XYE" to keep Z enabled so your bed stays in place + #define SD_FINISHED_STEPPERRELEASE true // Disable steppers when SD Print is finished + #define SD_FINISHED_RELEASECOMMAND "M84 E" // Use "M84XYE" to keep Z enabled so your bed stays in place // Reverse SD sort to show "more recent" files first, according to the card's FAT. // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended. @@ -1299,11 +1301,11 @@ #define SD_MENU_CONFIRM_START // Confirm the selected SD file before printing //#define NO_SD_AUTOSTART // Remove auto#.g file support completely to save some Flash, SRAM - //#define MENU_ADDAUTOSTART // Add a menu option to run auto#.g files + #define MENU_ADDAUTOSTART // Add a menu option to run auto#.g files //#define BROWSE_MEDIA_ON_INSERT // Open the file browser when media is inserted - #define EVENT_GCODE_SD_ABORT "G28" // G-code to run on SD Abort Print (e.g., "G28XY" or "G27") + #define EVENT_GCODE_SD_ABORT "G27" // G-code to run on SD Abort Print (e.g., "G28XY" or "G27") #if ENABLED(PRINTER_EVENT_LEDS) #define PE_LEDS_COMPLETED_TIME (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination @@ -1386,7 +1388,7 @@ //#define LONG_FILENAME_HOST_SUPPORT // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES + #define SCROLL_LONG_FILENAMES // Leave the heaters on after Stop Print (not recommended!) //#define SD_ABORT_NO_COOLDOWN @@ -1408,7 +1410,7 @@ /** * Auto-report SdCard status with M27 S */ - //#define AUTO_REPORT_SD_STATUS + #define AUTO_REPORT_SD_STATUS /** * Support for USB thumb drives using an Arduino USB Host Shield or @@ -1514,7 +1516,7 @@ */ #if HAS_MARLINUI_U8GLIB // Show SD percentage next to the progress bar - //#define DOGM_SD_PERCENT + #define DOGM_SD_PERCENT // Save many cycles by drawing a hollow frame or no frame on the Info Screen //#define XYZ_NO_FRAME @@ -1792,20 +1794,20 @@ * * Warning: Does not respect endstops! */ -//#define BABYSTEPPING +#define BABYSTEPPING #if ENABLED(BABYSTEPPING) //#define INTEGRATED_BABYSTEPPING // EXPERIMENTAL integration of babystepping into the Stepper ISR //#define BABYSTEP_WITHOUT_HOMING - //#define BABYSTEP_ALWAYS_AVAILABLE // Allow babystepping at all times (not just during movement). + #define BABYSTEP_ALWAYS_AVAILABLE // Allow babystepping at all times (not just during movement). //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way //#define BABYSTEP_MILLIMETER_UNITS // Specify BABYSTEP_MULTIPLICATOR_(XY|Z) in mm instead of micro-steps #define BABYSTEP_MULTIPLICATOR_Z 1 // (steps or mm) Steps or millimeter distance for each Z babystep #define BABYSTEP_MULTIPLICATOR_XY 1 // (steps or mm) Steps or millimeter distance for each XY babystep - //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. + #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 2000 // Maximum interval between clicks, in milliseconds. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on doubleclick when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) @@ -1839,12 +1841,12 @@ * * See https://marlinfw.org/docs/features/lin_advance.html for full instructions. */ -//#define LIN_ADVANCE +#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants - #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed + #define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants + #define LIN_ADVANCE_K 0 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // If enabled, this will generate debug information output over USB. - //#define EXPERIMENTAL_SCURVE // Enable this option to permit S-Curve Acceleration + #define EXPERIMENTAL_SCURVE // Enable this option to permit S-Curve Acceleration #endif // @section leveling @@ -1984,7 +1986,7 @@ // // G2/G3 Arc Support // -#define ARC_SUPPORT // Disable this feature to save ~3226 bytes +//#define ARC_SUPPORT // Disable this feature to save ~3226 bytes #if ENABLED(ARC_SUPPORT) #define MM_PER_ARC_SEGMENT 1 // (mm) Length (or minimum length) of each arc segment //#define ARC_SEGMENTS_PER_R 1 // Max segment length, MM_PER = Min @@ -2143,7 +2145,7 @@ * Currently handles M108, M112, M410, M876 * NOTE: Not yet implemented for all platforms. */ -//#define EMERGENCY_PARSER +#define EMERGENCY_PARSER /** * Realtime Reporting (requires EMERGENCY_PARSER) @@ -2172,7 +2174,7 @@ //#define NO_TIMEOUTS 1000 // Milliseconds // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. -//#define ADVANCED_OK +#define ADVANCED_OK // Printrun may have trouble receiving long strings all at once. // This option inserts short delays between lines of serial output. @@ -2313,7 +2315,7 @@ * * Enable PARK_HEAD_ON_PAUSE to add the G-code M125 Pause and Park. */ -//#define ADVANCED_PAUSE_FEATURE +#define ADVANCED_PAUSE_FEATURE #if ENABLED(ADVANCED_PAUSE_FEATURE) #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. @@ -2351,11 +2353,11 @@ #define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed. #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change. - //#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. - //#define HOME_BEFORE_FILAMENT_CHANGE // If needed, home before parking for filament change + #define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. + #define HOME_BEFORE_FILAMENT_CHANGE // If needed, home before parking for filament change - //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. - //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) + #define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. + #define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) #endif // @section tmc @@ -3441,7 +3443,7 @@ /** * Disable all Volumetric extrusion options */ -//#define NO_VOLUMETRICS +#define NO_VOLUMETRICS #if DISABLED(NO_VOLUMETRICS) /** @@ -3473,10 +3475,10 @@ * - M206 and M428 are disabled. * - G92 will revert to its behavior from Marlin 1.0. */ -//#define NO_WORKSPACE_OFFSETS +#define NO_WORKSPACE_OFFSETS // Extra options for the M114 "Current Position" report -//#define M114_DETAIL // Use 'M114` for details to check planner calculations +#define M114_DETAIL // Use 'M114` for details to check planner calculations //#define M114_REALTIME // Real current position based on forward kinematics //#define M114_LEGACY // M114 used to synchronize on every call. Enable if needed. @@ -3536,7 +3538,7 @@ * Add G-codes M810-M819 to define and run G-code macros. * Macros are not saved to EEPROM. */ -//#define GCODE_MACROS +#define GCODE_MACROS #if ENABLED(GCODE_MACROS) #define GCODE_MACROS_SLOTS 5 // Up to 10 may be used #define GCODE_MACROS_SLOT_SIZE 50 // Maximum length of a single macro @@ -3550,7 +3552,7 @@ // Custom Menu: Main Menu //#define CUSTOM_MENU_MAIN #if ENABLED(CUSTOM_MENU_MAIN) - //#define CUSTOM_MENU_MAIN_TITLE "Custom Commands" + #define CUSTOM_MENU_MAIN_TITLE "Custom Commands" #define CUSTOM_MENU_MAIN_SCRIPT_DONE "M117 User Script Done" #define CUSTOM_MENU_MAIN_SCRIPT_AUDIBLE_FEEDBACK //#define CUSTOM_MENU_MAIN_SCRIPT_RETURN // Return to status screen after a script @@ -3564,16 +3566,16 @@ #define MAIN_MENU_ITEM_2_GCODE "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND) //#define MAIN_MENU_ITEM_2_CONFIRM - //#define MAIN_MENU_ITEM_3_DESC "Preheat for " PREHEAT_2_LABEL - //#define MAIN_MENU_ITEM_3_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) + #define MAIN_MENU_ITEM_3_DESC "Preheat for " PREHEAT_2_LABEL + #define MAIN_MENU_ITEM_3_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) //#define MAIN_MENU_ITEM_3_CONFIRM - //#define MAIN_MENU_ITEM_4_DESC "Heat Bed/Home/Level" - //#define MAIN_MENU_ITEM_4_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29" + #define MAIN_MENU_ITEM_4_DESC "Heat Bed/Home/Level" + #define MAIN_MENU_ITEM_4_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29" //#define MAIN_MENU_ITEM_4_CONFIRM - //#define MAIN_MENU_ITEM_5_DESC "Home & Info" - //#define MAIN_MENU_ITEM_5_GCODE "G28\nM503" + #define MAIN_MENU_ITEM_5_DESC "Home & Info" + #define MAIN_MENU_ITEM_5_GCODE "G28\nM503" //#define MAIN_MENU_ITEM_5_CONFIRM #endif @@ -3652,9 +3654,9 @@ * Host Prompt Support enables Marlin to use the host for user prompts so * filament runout and other processes can be managed from the host side. */ -//#define HOST_ACTION_COMMANDS +#define HOST_ACTION_COMMANDS #if ENABLED(HOST_ACTION_COMMANDS) - //#define HOST_PROMPT_SUPPORT + #define HOST_PROMPT_SUPPORT //#define HOST_START_MENU_ITEM // Add a menu item that tells the host to start #endif @@ -3663,10 +3665,7 @@ * * Implement M486 to allow Marlin to skip objects */ -//#define CANCEL_OBJECTS -#if ENABLED(CANCEL_OBJECTS) - #define CANCEL_OBJECTS_REPORTING // Emit the current object as a status message -#endif +#define CANCEL_OBJECTS /** * I2C position encoders for closed loop control. diff --git a/config/examples/delta/Geeetech/G2S/Configuration.h b/config/examples/delta/Geeetech/G2S/Configuration.h index 464282b015..4f82207046 100644 --- a/config/examples/delta/Geeetech/G2S/Configuration.h +++ b/config/examples/delta/Geeetech/G2S/Configuration.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "delta/Geeetech/G2S" + /** * Configuration.h * @@ -134,11 +136,11 @@ // Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_RAMPS_14_EFB + #define MOTHERBOARD BOARD_GT2560_REV_A_PLUS #endif // Name displayed in the LCD "Ready" message and Info menu -#define CUSTOM_MACHINE_NAME "Deltabot" +#define CUSTOM_MACHINE_NAME "3D Printer" // Printer's unique ID, used by some programs to differentiate between machines. // Choose your own or use a service like https://www.uuidgenerator.net/version4 @@ -148,7 +150,7 @@ // This defines the number of extruders // :[0, 1, 2, 3, 4, 5, 6, 7, 8] -#define EXTRUDERS 1 +#define EXTRUDERS 2 // Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc. #define DEFAULT_NOMINAL_FILAMENT_DIA 1.75 @@ -319,7 +321,7 @@ * Specify whether the power supply is active HIGH or active LOW. */ #define PSU_CONTROL -//#define PSU_NAME "Power Supply" +#define PSU_NAME "Power Supply" #if ENABLED(PSU_CONTROL) #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box @@ -416,15 +418,15 @@ * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. */ -#define TEMP_SENSOR_0 -1 -#define TEMP_SENSOR_1 0 +#define TEMP_SENSOR_0 1 +#define TEMP_SENSOR_1 1 // G2S 1 #define TEMP_SENSOR_2 0 #define TEMP_SENSOR_3 0 #define TEMP_SENSOR_4 0 #define TEMP_SENSOR_5 0 #define TEMP_SENSOR_6 0 #define TEMP_SENSOR_7 0 -#define TEMP_SENSOR_BED 0 +#define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 #define TEMP_SENSOR_COOLER 0 @@ -448,7 +450,7 @@ #define TEMP_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer #define TEMP_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target -#define TEMP_BED_RESIDENCY_TIME 0 // (seconds) Time to wait for bed to "settle" in M190 +#define TEMP_BED_RESIDENCY_TIME 10 // (seconds) Time to wait for bed to "settle" in M190 #define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer #define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target @@ -505,8 +507,8 @@ #define PID_K1 0.95 // Smoothing factor within any PID loop #if ENABLED(PIDTEMP) - //#define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) - //#define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) + #define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) + #define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) // Set/get with gcode: M301 E[extruder number, 0-2] @@ -685,24 +687,22 @@ // Make delta curves from many straight lines (linear interpolation). // This is a trade-off between visible corners (not enough segments) // and processor overload (too many expensive sqrt calls). - #define DELTA_SEGMENTS_PER_SECOND 200 + #define DELTA_SEGMENTS_PER_SECOND 160 // After homing move down to a height where XY movement is unconstrained - //#define DELTA_HOME_TO_SAFE_ZONE + #define DELTA_HOME_TO_SAFE_ZONE // Delta calibration menu // uncomment to add three points calibration menu option. // See http://minow.blogspot.com/index.html#4918805519571907051 - //#define DELTA_CALIBRATION_MENU + #define DELTA_CALIBRATION_MENU // uncomment to add G33 Delta Auto-Calibration (Enable EEPROM_SETTINGS to store results) - //#define DELTA_AUTO_CALIBRATION - - // NOTE NB all values for DELTA_* values MUST be floating point, so always have a decimal point in them + #define DELTA_AUTO_CALIBRATION #if ENABLED(DELTA_AUTO_CALIBRATION) // set the default number of probe points : n*n (1 -> 7) - #define DELTA_CALIBRATION_DEFAULT_POINTS 4 + #define DELTA_CALIBRATION_DEFAULT_POINTS 2 #endif #if EITHER(DELTA_AUTO_CALIBRATION, DELTA_CALIBRATION_MENU) @@ -711,23 +711,23 @@ #endif // Print surface diameter/2 minus unreachable space (avoid collisions with vertical towers). - #define DELTA_PRINTABLE_RADIUS 140.0 // (mm) + #define DELTA_PRINTABLE_RADIUS 90.0 // (mm) // Center-to-center distance of the holes in the diagonal push rods. - #define DELTA_DIAGONAL_ROD 250.0 // (mm) + #define DELTA_DIAGONAL_ROD 196.0 // (mm) // Distance between bed and nozzle Z home position - #define DELTA_HEIGHT 250.00 // (mm) Get this value from G33 auto calibrate + #define DELTA_HEIGHT 200 // (mm) Get this value from G33 auto calibrate #define DELTA_ENDSTOP_ADJ { 0.0, 0.0, 0.0 } // Get these values from G33 auto calibrate // Horizontal distance bridged by diagonal push rods when effector is centered. - #define DELTA_RADIUS 124.0 // (mm) Get this value from G33 auto calibrate + #define DELTA_RADIUS 90.0 // (mm) Get this value from G33 auto calibrate // Trim adjustments for individual towers // tower angle corrections for X and Y tower / rotate XYZ so Z tower angle = 0 // measured in degrees anticlockwise looking from above the printer - #define DELTA_TOWER_ANGLE_TRIM { 0.0, 0.0, 0.0 } // Get these values from G33 auto calibrate + #define DELTA_TOWER_ANGLE_TRIM { 0.70, 0.05, -0.74 } // Get these values from G33 auto calibrate // Delta radius and diagonal rod adjustments (mm) //#define DELTA_RADIUS_TRIM_TOWER { 0.0, 0.0, 0.0 } @@ -778,13 +778,13 @@ #endif // Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define X_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Y_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Z_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Z_MIN_PROBE_ENDSTOP_INVERTING true // Set to true to invert the logic of the probe. +#define X_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. +#define Y_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. +#define Z_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. // G2 false +#define X_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. +#define Y_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. +#define Z_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. +#define Z_MIN_PROBE_ENDSTOP_INVERTING Z_MIN_ENDSTOP_INVERTING // Set to true to invert the logic of the probe. /** * Stepper Drivers @@ -813,7 +813,7 @@ //#define Z3_DRIVER_TYPE A4988 //#define Z4_DRIVER_TYPE A4988 #define E0_DRIVER_TYPE A4988 -//#define E1_DRIVER_TYPE A4988 +#define E1_DRIVER_TYPE A4988 //#define E2_DRIVER_TYPE A4988 //#define E3_DRIVER_TYPE A4988 //#define E4_DRIVER_TYPE A4988 @@ -837,7 +837,7 @@ * * :[2,3,4,5,6,7] */ -//#define ENDSTOP_NOISE_THRESHOLD 2 +#define ENDSTOP_NOISE_THRESHOLD 2 // Check for stuck or disconnected endstops during homing moves. //#define DETECT_BROKEN_ENDSTOP @@ -861,7 +861,7 @@ * following movement settings. If fewer factors are given than the * total number of extruders, the last value applies to the rest. */ -//#define DISTINCT_E_FACTORS +#define DISTINCT_E_FACTORS /** * Default Axis Steps Per Unit (steps/mm) @@ -876,18 +876,18 @@ // delta speeds must be the same on xyz #define DEFAULT_XYZ_STEPS_PER_UNIT ((XYZ_FULL_STEPS_PER_ROTATION) * (XYZ_MICROSTEPS) / double(XYZ_BELT_PITCH) / double(XYZ_PULLEY_TEETH)) -#define DEFAULT_AXIS_STEPS_PER_UNIT { DEFAULT_XYZ_STEPS_PER_UNIT, DEFAULT_XYZ_STEPS_PER_UNIT, DEFAULT_XYZ_STEPS_PER_UNIT, 760*1.1 } // default steps per unit for Kossel (GT2, 20 tooth) +#define DEFAULT_AXIS_STEPS_PER_UNIT { DEFAULT_XYZ_STEPS_PER_UNIT, DEFAULT_XYZ_STEPS_PER_UNIT, DEFAULT_XYZ_STEPS_PER_UNIT, 100 } // default steps per unit for Kossel (GT2, 20 tooth) /** * Default Max Feed Rate (mm/s) * Override with M203 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_FEEDRATE { 500, 500, 500, 25 } +#define DEFAULT_MAX_FEEDRATE { 200, 200, 200, 25 } //#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 #if ENABLED(LIMITED_MAX_FR_EDITING) - #define MAX_FEEDRATE_EDIT_VALUES { 600, 600, 10, 50 } // ...or, set your own edit limits + #define MAX_FEEDRATE_EDIT_VALUES { 600, 600, 600, 50 } // ...or, set your own edit limits #endif /** @@ -896,7 +896,7 @@ * Override with M201 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_ACCELERATION { 9000, 9000, 9000, 10000 } +#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 3000, 10000 } //#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 #if ENABLED(LIMITED_MAX_ACCEL_EDITING) @@ -911,9 +911,9 @@ * M204 R Retract Acceleration * M204 T Travel Acceleration */ -#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves +#define DEFAULT_ACCELERATION 1000 // X, Y, Z and E acceleration for printing moves +#define DEFAULT_RETRACT_ACCELERATION 1000 // E acceleration for retracts +#define DEFAULT_TRAVEL_ACCELERATION 1000 // X, Y, Z acceleration for travel (non printing) moves /** * Default Jerk limits (mm/s) @@ -925,7 +925,7 @@ */ #define CLASSIC_JERK #if ENABLED(CLASSIC_JERK) - #define DEFAULT_XJERK 10.0 + #define DEFAULT_XJERK 8.0 #define DEFAULT_YJERK DEFAULT_XJERK #define DEFAULT_ZJERK DEFAULT_XJERK // Must be same as XY for delta @@ -960,7 +960,7 @@ * * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained */ -//#define S_CURVE_ACCELERATION +#define S_CURVE_ACCELERATION //=========================================================================== //============================= Z Probe Options ============================= @@ -1085,7 +1085,7 @@ * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. Uses Z_MIN_PIN. */ -//#define Z_PROBE_ALLEN_KEY +#define Z_PROBE_ALLEN_KEY #if ENABLED(Z_PROBE_ALLEN_KEY) // 2 or 3 sets of coordinates for deploying and retracting the spring loaded touch probe on G29, @@ -1154,17 +1154,17 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 0, -10, -3.5 } +#define NOZZLE_TO_PROBE_OFFSET { 19, -11, -2 } // G2 { 19, -11, -2 } // Most probes should stay away from the edges of the bed, but // with NOZZLE_AS_PROBE this can be negative for a wider probing area. -#define PROBING_MARGIN 10 +#define PROBING_MARGIN 1 // X and Y axis travel speed (mm/min) between probes -#define XY_PROBE_FEEDRATE (66*60) +#define XY_PROBE_FEEDRATE HOMING_FEEDRATE_Z // Feedrate (mm/min) for the first approach when double-probing (MULTIPLE_PROBING == 2) -#define Z_PROBE_FEEDRATE_FAST (200*60) +#define Z_PROBE_FEEDRATE_FAST (60*60) // Feedrate (mm/min) for the "accurate" probe of each point #define Z_PROBE_FEEDRATE_SLOW (Z_PROBE_FEEDRATE_FAST / 2) @@ -1222,7 +1222,7 @@ * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. */ -#define Z_CLEARANCE_DEPLOY_PROBE 15 // Z Clearance for Deploy/Stow +#define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow #define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points #define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes //#define Z_AFTER_PROBING 5 // Z position after probing is done @@ -1289,21 +1289,21 @@ // @section machine // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR false -#define INVERT_Y_DIR false -#define INVERT_Z_DIR false +#define INVERT_X_DIR true +#define INVERT_Y_DIR true +#define INVERT_Z_DIR true // @section extruder // For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR false -#define INVERT_E1_DIR false -#define INVERT_E2_DIR false -#define INVERT_E3_DIR false -#define INVERT_E4_DIR false -#define INVERT_E5_DIR false -#define INVERT_E6_DIR false -#define INVERT_E7_DIR false +#define INVERT_E0_DIR true +#define INVERT_E1_DIR false // Geeetech G2S usually comes with a "mirrored" feeder running in the opposite direction +#define INVERT_E2_DIR true +#define INVERT_E3_DIR true +#define INVERT_E4_DIR true +#define INVERT_E5_DIR true +#define INVERT_E6_DIR true +#define INVERT_E7_DIR true // @section homing @@ -1317,7 +1317,7 @@ */ //#define Z_IDLE_HEIGHT Z_HOME_POS -//#define Z_HOMING_HEIGHT 4 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ... +#define Z_HOMING_HEIGHT 4 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ... // Be sure to have this much clearance over your Z_MAX_POS to prevent grinding. //#define Z_AFTER_HOMING 10 // (mm) Height to move to after homing Z @@ -1368,7 +1368,7 @@ #endif #if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS) - //#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD + #define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD #endif /** @@ -1487,7 +1487,7 @@ //#define AUTO_BED_LEVELING_3POINT //#define AUTO_BED_LEVELING_LINEAR //#define AUTO_BED_LEVELING_BILINEAR -//#define AUTO_BED_LEVELING_UBL +#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING /** @@ -1495,7 +1495,7 @@ * these options to restore the prior leveling state or to always enable * leveling immediately after G28. */ -//#define RESTORE_LEVELING_AFTER_G28 +#define RESTORE_LEVELING_AFTER_G28 //#define ENABLE_LEVELING_AFTER_G28 /** @@ -1554,7 +1554,7 @@ // Set the number of grid points per dimension. // Works best with 5 or more points in each dimension. - #define GRID_MAX_POINTS_X 9 + #define GRID_MAX_POINTS_X 5 #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X // Probe along the Y axis, advancing X after each column @@ -1587,7 +1587,7 @@ //#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh #define MESH_INSET 1 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. + #define GRID_MAX_POINTS_X 5 // Don't use more than 15 points per axis, implementation limited. #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X //#define UBL_HILBERT_CURVE // Use Hilbert distribution for less travel when probing multiple points @@ -1595,7 +1595,7 @@ #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 - //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used + #define UBL_Z_RAISE_WHEN_OFF_MESH 0 // When the nozzle is off the mesh, this value is used // as the Z-Height correction value. //#define UBL_MESH_WIZARD // Run several commands in a row to get a complete mesh @@ -1606,7 +1606,7 @@ //=================================== Mesh ================================== //=========================================================================== - #define MESH_INSET 10 // Set Mesh bounds as an inset region of the bed + #define MESH_INSET 1 // Set Mesh bounds as an inset region of the bed #define GRID_MAX_POINTS_X 3 // Don't use more than 7 points per axis, implementation limited. #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X @@ -1633,7 +1633,7 @@ #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner + #define LEVEL_CENTER_TOO // Move to the center after the last corner //#define LEVEL_CORNERS_USE_PROBE #if ENABLED(LEVEL_CORNERS_USE_PROBE) #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 @@ -1694,8 +1694,9 @@ #define Z_SAFE_HOMING_Y_POINT Y_CENTER // Y point for Z homing #endif -// Delta only homes to Z -#define HOMING_FEEDRATE_MM_M { (200*60), (200*60), (200*60) } +// Homing speeds (mm/min) +#define HOMING_FEEDRATE_Z (60*60) +#define HOMING_FEEDRATE_MM_M { HOMING_FEEDRATE_Z, HOMING_FEEDRATE_Z, HOMING_FEEDRATE_Z } // Validate that endstops are triggered on homing moves #define VALIDATE_HOMING_ENDSTOPS @@ -1772,12 +1773,12 @@ * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) */ -//#define EEPROM_SETTINGS // Persistent storage with M500 and M501 +#define EEPROM_SETTINGS // Persistent storage with M500 and M501 //#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. #define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load #if ENABLED(EEPROM_SETTINGS) - //#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. + #define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. #endif // @@ -1806,16 +1807,16 @@ // Preheat Constants - Up to 5 are supported without changes // #define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 180 -#define PREHEAT_1_TEMP_BED 70 +#define PREHEAT_1_TEMP_HOTEND 200 +#define PREHEAT_1_TEMP_BED 60 #define PREHEAT_1_TEMP_CHAMBER 35 -#define PREHEAT_1_FAN_SPEED 255 // Value from 0 to 255 +#define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 #define PREHEAT_2_LABEL "ABS" -#define PREHEAT_2_TEMP_HOTEND 240 +#define PREHEAT_2_TEMP_HOTEND 250 #define PREHEAT_2_TEMP_BED 100 #define PREHEAT_2_TEMP_CHAMBER 35 -#define PREHEAT_2_FAN_SPEED 255 // Value from 0 to 255 +#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 /** * Nozzle Park @@ -1828,11 +1829,11 @@ * P1 Raise the nozzle always to Z-park height. * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. */ -//#define NOZZLE_PARK_FEATURE +#define NOZZLE_PARK_FEATURE #if ENABLED(NOZZLE_PARK_FEATURE) // Specify a park position as { X, Y, Z_raise } - #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), 0, 20 } + #define NOZZLE_PARK_POINT { 0, 0, 20 } //#define NOZZLE_PARK_X_ONLY // X move only is required to park //#define NOZZLE_PARK_Y_ONLY // Y move only is required to park #define NOZZLE_PARK_Z_RAISE_MIN 2 // (mm) Always raise Z by at least this distance @@ -2036,7 +2037,7 @@ * SD Card support is disabled by default. If your controller has an SD slot, * you must uncomment the following option or it won't work. */ -//#define SDSUPPORT +#define SDSUPPORT /** * SD CARD: ENABLE CRC @@ -2114,7 +2115,7 @@ // If you have a speaker that can produce tones, enable it here. // By default Marlin assumes you have a buzzer with a fixed frequency. // -//#define SPEAKER +#define SPEAKER // // The duration and frequency for the UI feedback sound. @@ -2123,8 +2124,8 @@ // Note: Test audio output with the G-Code: // M300 S P // -//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 -//#define LCD_FEEDBACK_FREQUENCY_HZ 5000 +#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 10 +#define LCD_FEEDBACK_FREQUENCY_HZ 50 //============================================================================= //======================== LCD / Controller Selection ========================= @@ -2137,7 +2138,7 @@ // // Note: Usually sold with a white PCB. // -//#define REPRAP_DISCOUNT_SMART_CONTROLLER +#define REPRAP_DISCOUNT_SMART_CONTROLLER // // GT2560 (YHCB2004) LCD Display @@ -2718,7 +2719,7 @@ // Use software PWM to drive the fan, as for the heaters. This uses a very low frequency // which is not as annoying as with the hardware PWM. On the other hand, if this frequency // is too low, you should also increment SOFT_PWM_SCALE. -//#define FAN_SOFT_PWM +#define FAN_SOFT_PWM // Incrementing this by 1 will double the software PWM frequency, // affecting heaters, and the fan if FAN_SOFT_PWM is enabled. diff --git a/config/examples/delta/Geeetech/G2S/Configuration_adv.h b/config/examples/delta/Geeetech/G2S/Configuration_adv.h index aa6bbae7e4..37fb02e088 100644 --- a/config/examples/delta/Geeetech/G2S/Configuration_adv.h +++ b/config/examples/delta/Geeetech/G2S/Configuration_adv.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "delta/Geeetech/G2S" + /** * Configuration_adv.h * @@ -307,7 +309,7 @@ #if ENABLED(PIDTEMP) // Add an experimental additional term to the heater power, proportional to the extrusion speed. // A well-chosen Kc value should add just enough power to melt the increased material volume. - //#define PID_EXTRUSION_SCALING + #define PID_EXTRUSION_SCALING #if ENABLED(PID_EXTRUSION_SCALING) #define DEFAULT_Kc (100) // heating power = Kc * e_speed #define LPQ_MAX_LEN 50 @@ -391,7 +393,7 @@ // Show Temperature ADC value // Enable for M105 to include ADC values read from temperature sensors. -//#define SHOW_TEMP_ADC_VALUES +#define SHOW_TEMP_ADC_VALUES /** * High Temperature Thermistor Support @@ -411,14 +413,14 @@ // The number of consecutive low temperature errors that can occur // before a min_temp_error is triggered. (Shouldn't be more than 10.) -//#define MAX_CONSECUTIVE_LOW_TEMPERATURE_ERROR_ALLOWED 0 +#define MAX_CONSECUTIVE_LOW_TEMPERATURE_ERROR_ALLOWED 10 // The number of milliseconds a hotend will preheat before starting to check // the temperature. This value should NOT be set to the time it takes the // hot end to reach the target temperature, but the time it takes to reach // the minimum temperature your thermistor can read. The lower the better/safer. // This shouldn't need to be more than 30 seconds (30000) -//#define MILLISECONDS_PREHEAT_TIME 0 +#define MILLISECONDS_PREHEAT_TIME 30000 // @section extruder @@ -496,7 +498,7 @@ * * Define one or both of these to override the default 0-255 range. */ -//#define FAN_MIN_PWM 50 +#define FAN_MIN_PWM 50 //#define FAN_MAX_PWM 128 /** @@ -927,9 +929,9 @@ * The Deactive Time can be overridden with M18 and M84. Set to 0 for No Timeout. */ #define DEFAULT_STEPPER_DEACTIVE_TIME 60 -#define DISABLE_INACTIVE_X true -#define DISABLE_INACTIVE_Y true -#define DISABLE_INACTIVE_Z true // Set 'false' if the nozzle could fall onto your printed part! +#define DISABLE_INACTIVE_X false +#define DISABLE_INACTIVE_Y false +#define DISABLE_INACTIVE_Z false // Set 'false' if the nozzle could fall onto your printed part! #define DISABLE_INACTIVE_E true // Default Minimum Feedrates for printing and travel moves @@ -1060,7 +1062,7 @@ * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the * lowest stepping frequencies. */ -//#define ADAPTIVE_STEP_SMOOTHING +#define ADAPTIVE_STEP_SMOOTHING /** * Custom Microstepping @@ -1147,15 +1149,15 @@ // Change values more rapidly when the encoder is rotated faster #define ENCODER_RATE_MULTIPLIER #if ENABLED(ENCODER_RATE_MULTIPLIER) - #define ENCODER_10X_STEPS_PER_SEC 30 // (steps/s) Encoder rate for 10x speed + #define ENCODER_10X_STEPS_PER_SEC 40 // (steps/s) Encoder rate for 10x speed #define ENCODER_100X_STEPS_PER_SEC 80 // (steps/s) Encoder rate for 100x speed #endif // Play a beep when the feedrate is changed from the Status Screen -//#define BEEP_ON_FEEDRATE_CHANGE +#define BEEP_ON_FEEDRATE_CHANGE #if ENABLED(BEEP_ON_FEEDRATE_CHANGE) #define FEEDRATE_CHANGE_BEEP_DURATION 10 - #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 + #define FEEDRATE_CHANGE_BEEP_FREQUENCY 50 #endif #if HAS_LCD_MENU @@ -1177,13 +1179,13 @@ #endif // Include a page of printer information in the LCD Main Menu - //#define LCD_INFO_MENU + #define LCD_INFO_MENU #if ENABLED(LCD_INFO_MENU) //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages #endif // BACK menu items keep the highlight at the top - //#define TURBO_BACK_MENU_ITEM + #define TURBO_BACK_MENU_ITEM // Add a mute option to the LCD menu //#define SOUND_MENU_ITEM @@ -1221,7 +1223,7 @@ #if HAS_DISPLAY // The timeout (in ms) to return to the status screen from sub-menus - //#define LCD_TIMEOUT_TO_STATUS 15000 + #define LCD_TIMEOUT_TO_STATUS 60000 #if ENABLED(SHOW_BOOTSCREEN) #define BOOTSCREEN_TIMEOUT 4000 // (ms) Total Duration to display the boot screen(s) @@ -1231,34 +1233,34 @@ #endif // Scroll a longer status message into view - //#define STATUS_MESSAGE_SCROLLING + #define STATUS_MESSAGE_SCROLLING // On the Info Screen, display XY with one decimal place when possible - //#define LCD_DECIMAL_SMALL_XY + #define LCD_DECIMAL_SMALL_XY // Add an 'M73' G-code to set the current percentage - //#define LCD_SET_PROGRESS_MANUALLY + #define LCD_SET_PROGRESS_MANUALLY // Show the E position (filament used) during printing - //#define LCD_SHOW_E_TOTAL + #define LCD_SHOW_E_TOTAL #endif #if EITHER(SDSUPPORT, LCD_SET_PROGRESS_MANUALLY) && ANY(HAS_MARLINUI_U8GLIB, HAS_MARLINUI_HD44780, IS_TFTGLCD_PANEL, EXTENSIBLE_UI) - //#define SHOW_REMAINING_TIME // Display estimated time to completion + #define SHOW_REMAINING_TIME // Display estimated time to completion #if ENABLED(SHOW_REMAINING_TIME) - //#define USE_M73_REMAINING_TIME // Use remaining time from M73 command instead of estimation - //#define ROTATE_PROGRESS_DISPLAY // Display (P)rogress, (E)lapsed, and (R)emaining time + #define USE_M73_REMAINING_TIME // Use remaining time from M73 command instead of estimation + #define ROTATE_PROGRESS_DISPLAY // Display (P)rogress, (E)lapsed, and (R)emaining time #endif #if EITHER(HAS_MARLINUI_U8GLIB, EXTENSIBLE_UI) - //#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits + #define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits #endif #if EITHER(HAS_MARLINUI_HD44780, IS_TFTGLCD_PANEL) - //#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing + #define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing #if ENABLED(LCD_PROGRESS_BAR) - #define PROGRESS_BAR_BAR_TIME 2000 // (ms) Amount of time to show the bar - #define PROGRESS_BAR_MSG_TIME 3000 // (ms) Amount of time to show the status message + #define PROGRESS_BAR_BAR_TIME 5000 // (ms) Amount of time to show the bar + #define PROGRESS_BAR_MSG_TIME 3500 // (ms) Amount of time to show the status message #define PROGRESS_MSG_EXPIRE 0 // (ms) Amount of time to retain the status message (0=forever) //#define PROGRESS_MSG_ONCE // Show the message for MSG_TIME then clear it //#define LCD_PROGRESS_BAR_TEST // Add a menu item to test the progress bar @@ -1289,8 +1291,8 @@ #define SD_PROCEDURE_DEPTH 1 // Increase if you need more nested M32 calls - #define SD_FINISHED_STEPPERRELEASE true // Disable steppers when SD Print is finished - #define SD_FINISHED_RELEASECOMMAND "M84" // Use "M84XYE" to keep Z enabled so your bed stays in place + #define SD_FINISHED_STEPPERRELEASE true // Disable steppers when SD Print is finished + #define SD_FINISHED_RELEASECOMMAND "M84 E" // Use "M84XYE" to keep Z enabled so your bed stays in place // Reverse SD sort to show "more recent" files first, according to the card's FAT. // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended. @@ -1299,11 +1301,11 @@ #define SD_MENU_CONFIRM_START // Confirm the selected SD file before printing //#define NO_SD_AUTOSTART // Remove auto#.g file support completely to save some Flash, SRAM - //#define MENU_ADDAUTOSTART // Add a menu option to run auto#.g files + #define MENU_ADDAUTOSTART // Add a menu option to run auto#.g files //#define BROWSE_MEDIA_ON_INSERT // Open the file browser when media is inserted - #define EVENT_GCODE_SD_ABORT "G28" // G-code to run on SD Abort Print (e.g., "G28XY" or "G27") + #define EVENT_GCODE_SD_ABORT "G27" // G-code to run on SD Abort Print (e.g., "G28XY" or "G27") #if ENABLED(PRINTER_EVENT_LEDS) #define PE_LEDS_COMPLETED_TIME (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination @@ -1386,7 +1388,7 @@ //#define LONG_FILENAME_HOST_SUPPORT // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES + #define SCROLL_LONG_FILENAMES // Leave the heaters on after Stop Print (not recommended!) //#define SD_ABORT_NO_COOLDOWN @@ -1408,7 +1410,7 @@ /** * Auto-report SdCard status with M27 S */ - //#define AUTO_REPORT_SD_STATUS + #define AUTO_REPORT_SD_STATUS /** * Support for USB thumb drives using an Arduino USB Host Shield or @@ -1514,7 +1516,7 @@ */ #if HAS_MARLINUI_U8GLIB // Show SD percentage next to the progress bar - //#define DOGM_SD_PERCENT + #define DOGM_SD_PERCENT // Save many cycles by drawing a hollow frame or no frame on the Info Screen //#define XYZ_NO_FRAME @@ -1792,20 +1794,20 @@ * * Warning: Does not respect endstops! */ -//#define BABYSTEPPING +#define BABYSTEPPING #if ENABLED(BABYSTEPPING) //#define INTEGRATED_BABYSTEPPING // EXPERIMENTAL integration of babystepping into the Stepper ISR //#define BABYSTEP_WITHOUT_HOMING - //#define BABYSTEP_ALWAYS_AVAILABLE // Allow babystepping at all times (not just during movement). + #define BABYSTEP_ALWAYS_AVAILABLE // Allow babystepping at all times (not just during movement). //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way //#define BABYSTEP_MILLIMETER_UNITS // Specify BABYSTEP_MULTIPLICATOR_(XY|Z) in mm instead of micro-steps #define BABYSTEP_MULTIPLICATOR_Z 1 // (steps or mm) Steps or millimeter distance for each Z babystep #define BABYSTEP_MULTIPLICATOR_XY 1 // (steps or mm) Steps or millimeter distance for each XY babystep - //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. + #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 2000 // Maximum interval between clicks, in milliseconds. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on doubleclick when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) @@ -1839,12 +1841,12 @@ * * See https://marlinfw.org/docs/features/lin_advance.html for full instructions. */ -//#define LIN_ADVANCE +#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants - #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed + #define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants + #define LIN_ADVANCE_K 0 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // If enabled, this will generate debug information output over USB. - //#define EXPERIMENTAL_SCURVE // Enable this option to permit S-Curve Acceleration + #define EXPERIMENTAL_SCURVE // Enable this option to permit S-Curve Acceleration #endif // @section leveling @@ -1984,7 +1986,7 @@ // // G2/G3 Arc Support // -#define ARC_SUPPORT // Disable this feature to save ~3226 bytes +//#define ARC_SUPPORT // Disable this feature to save ~3226 bytes #if ENABLED(ARC_SUPPORT) #define MM_PER_ARC_SEGMENT 1 // (mm) Length (or minimum length) of each arc segment //#define ARC_SEGMENTS_PER_R 1 // Max segment length, MM_PER = Min @@ -2143,7 +2145,7 @@ * Currently handles M108, M112, M410, M876 * NOTE: Not yet implemented for all platforms. */ -//#define EMERGENCY_PARSER +#define EMERGENCY_PARSER /** * Realtime Reporting (requires EMERGENCY_PARSER) @@ -2172,7 +2174,7 @@ //#define NO_TIMEOUTS 1000 // Milliseconds // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. -//#define ADVANCED_OK +#define ADVANCED_OK // Printrun may have trouble receiving long strings all at once. // This option inserts short delays between lines of serial output. @@ -2313,7 +2315,7 @@ * * Enable PARK_HEAD_ON_PAUSE to add the G-code M125 Pause and Park. */ -//#define ADVANCED_PAUSE_FEATURE +#define ADVANCED_PAUSE_FEATURE #if ENABLED(ADVANCED_PAUSE_FEATURE) #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. @@ -2351,11 +2353,11 @@ #define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed. #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change. - //#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. - //#define HOME_BEFORE_FILAMENT_CHANGE // If needed, home before parking for filament change + #define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. + #define HOME_BEFORE_FILAMENT_CHANGE // If needed, home before parking for filament change - //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. - //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) + #define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. + #define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) #endif // @section tmc @@ -3441,7 +3443,7 @@ /** * Disable all Volumetric extrusion options */ -//#define NO_VOLUMETRICS +#define NO_VOLUMETRICS #if DISABLED(NO_VOLUMETRICS) /** @@ -3473,10 +3475,10 @@ * - M206 and M428 are disabled. * - G92 will revert to its behavior from Marlin 1.0. */ -//#define NO_WORKSPACE_OFFSETS +#define NO_WORKSPACE_OFFSETS // Extra options for the M114 "Current Position" report -//#define M114_DETAIL // Use 'M114` for details to check planner calculations +#define M114_DETAIL // Use 'M114` for details to check planner calculations //#define M114_REALTIME // Real current position based on forward kinematics //#define M114_LEGACY // M114 used to synchronize on every call. Enable if needed. @@ -3536,7 +3538,7 @@ * Add G-codes M810-M819 to define and run G-code macros. * Macros are not saved to EEPROM. */ -//#define GCODE_MACROS +#define GCODE_MACROS #if ENABLED(GCODE_MACROS) #define GCODE_MACROS_SLOTS 5 // Up to 10 may be used #define GCODE_MACROS_SLOT_SIZE 50 // Maximum length of a single macro @@ -3550,7 +3552,7 @@ // Custom Menu: Main Menu //#define CUSTOM_MENU_MAIN #if ENABLED(CUSTOM_MENU_MAIN) - //#define CUSTOM_MENU_MAIN_TITLE "Custom Commands" + #define CUSTOM_MENU_MAIN_TITLE "Custom Commands" #define CUSTOM_MENU_MAIN_SCRIPT_DONE "M117 User Script Done" #define CUSTOM_MENU_MAIN_SCRIPT_AUDIBLE_FEEDBACK //#define CUSTOM_MENU_MAIN_SCRIPT_RETURN // Return to status screen after a script @@ -3564,16 +3566,16 @@ #define MAIN_MENU_ITEM_2_GCODE "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND) //#define MAIN_MENU_ITEM_2_CONFIRM - //#define MAIN_MENU_ITEM_3_DESC "Preheat for " PREHEAT_2_LABEL - //#define MAIN_MENU_ITEM_3_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) + #define MAIN_MENU_ITEM_3_DESC "Preheat for " PREHEAT_2_LABEL + #define MAIN_MENU_ITEM_3_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) //#define MAIN_MENU_ITEM_3_CONFIRM - //#define MAIN_MENU_ITEM_4_DESC "Heat Bed/Home/Level" - //#define MAIN_MENU_ITEM_4_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29" + #define MAIN_MENU_ITEM_4_DESC "Heat Bed/Home/Level" + #define MAIN_MENU_ITEM_4_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29" //#define MAIN_MENU_ITEM_4_CONFIRM - //#define MAIN_MENU_ITEM_5_DESC "Home & Info" - //#define MAIN_MENU_ITEM_5_GCODE "G28\nM503" + #define MAIN_MENU_ITEM_5_DESC "Home & Info" + #define MAIN_MENU_ITEM_5_GCODE "G28\nM503" //#define MAIN_MENU_ITEM_5_CONFIRM #endif @@ -3652,9 +3654,9 @@ * Host Prompt Support enables Marlin to use the host for user prompts so * filament runout and other processes can be managed from the host side. */ -//#define HOST_ACTION_COMMANDS +#define HOST_ACTION_COMMANDS #if ENABLED(HOST_ACTION_COMMANDS) - //#define HOST_PROMPT_SUPPORT + #define HOST_PROMPT_SUPPORT //#define HOST_START_MENU_ITEM // Add a menu item that tells the host to start #endif @@ -3663,10 +3665,7 @@ * * Implement M486 to allow Marlin to skip objects */ -//#define CANCEL_OBJECTS -#if ENABLED(CANCEL_OBJECTS) - #define CANCEL_OBJECTS_REPORTING // Emit the current object as a status message -#endif +#define CANCEL_OBJECTS /** * I2C position encoders for closed loop control. diff --git a/config/examples/delta/Geeetech/G2SPro/Configuration.h b/config/examples/delta/Geeetech/G2SPro/Configuration.h index 464282b015..51d8a8dab4 100644 --- a/config/examples/delta/Geeetech/G2SPro/Configuration.h +++ b/config/examples/delta/Geeetech/G2SPro/Configuration.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "delta/Geeetech/G2SPro" + /** * Configuration.h * @@ -134,11 +136,11 @@ // Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_RAMPS_14_EFB + #define MOTHERBOARD BOARD_GT2560_REV_A_PLUS #endif // Name displayed in the LCD "Ready" message and Info menu -#define CUSTOM_MACHINE_NAME "Deltabot" +#define CUSTOM_MACHINE_NAME "3D Printer" // Printer's unique ID, used by some programs to differentiate between machines. // Choose your own or use a service like https://www.uuidgenerator.net/version4 @@ -148,7 +150,7 @@ // This defines the number of extruders // :[0, 1, 2, 3, 4, 5, 6, 7, 8] -#define EXTRUDERS 1 +#define EXTRUDERS 2 // Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc. #define DEFAULT_NOMINAL_FILAMENT_DIA 1.75 @@ -319,7 +321,7 @@ * Specify whether the power supply is active HIGH or active LOW. */ #define PSU_CONTROL -//#define PSU_NAME "Power Supply" +#define PSU_NAME "Power Supply" #if ENABLED(PSU_CONTROL) #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box @@ -416,15 +418,15 @@ * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. */ -#define TEMP_SENSOR_0 -1 -#define TEMP_SENSOR_1 0 +#define TEMP_SENSOR_0 1 +#define TEMP_SENSOR_1 1 // G2S 1 #define TEMP_SENSOR_2 0 #define TEMP_SENSOR_3 0 #define TEMP_SENSOR_4 0 #define TEMP_SENSOR_5 0 #define TEMP_SENSOR_6 0 #define TEMP_SENSOR_7 0 -#define TEMP_SENSOR_BED 0 +#define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 #define TEMP_SENSOR_COOLER 0 @@ -448,7 +450,7 @@ #define TEMP_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer #define TEMP_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target -#define TEMP_BED_RESIDENCY_TIME 0 // (seconds) Time to wait for bed to "settle" in M190 +#define TEMP_BED_RESIDENCY_TIME 10 // (seconds) Time to wait for bed to "settle" in M190 #define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer #define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target @@ -505,8 +507,8 @@ #define PID_K1 0.95 // Smoothing factor within any PID loop #if ENABLED(PIDTEMP) - //#define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) - //#define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) + #define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) + #define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) // Set/get with gcode: M301 E[extruder number, 0-2] @@ -685,24 +687,22 @@ // Make delta curves from many straight lines (linear interpolation). // This is a trade-off between visible corners (not enough segments) // and processor overload (too many expensive sqrt calls). - #define DELTA_SEGMENTS_PER_SECOND 200 + #define DELTA_SEGMENTS_PER_SECOND 160 // After homing move down to a height where XY movement is unconstrained - //#define DELTA_HOME_TO_SAFE_ZONE + #define DELTA_HOME_TO_SAFE_ZONE // Delta calibration menu // uncomment to add three points calibration menu option. // See http://minow.blogspot.com/index.html#4918805519571907051 - //#define DELTA_CALIBRATION_MENU + #define DELTA_CALIBRATION_MENU // uncomment to add G33 Delta Auto-Calibration (Enable EEPROM_SETTINGS to store results) - //#define DELTA_AUTO_CALIBRATION - - // NOTE NB all values for DELTA_* values MUST be floating point, so always have a decimal point in them + #define DELTA_AUTO_CALIBRATION #if ENABLED(DELTA_AUTO_CALIBRATION) // set the default number of probe points : n*n (1 -> 7) - #define DELTA_CALIBRATION_DEFAULT_POINTS 4 + #define DELTA_CALIBRATION_DEFAULT_POINTS 2 #endif #if EITHER(DELTA_AUTO_CALIBRATION, DELTA_CALIBRATION_MENU) @@ -711,23 +711,23 @@ #endif // Print surface diameter/2 minus unreachable space (avoid collisions with vertical towers). - #define DELTA_PRINTABLE_RADIUS 140.0 // (mm) + #define DELTA_PRINTABLE_RADIUS 90.0 // (mm) // Center-to-center distance of the holes in the diagonal push rods. - #define DELTA_DIAGONAL_ROD 250.0 // (mm) + #define DELTA_DIAGONAL_ROD 196.0 // (mm) // Distance between bed and nozzle Z home position - #define DELTA_HEIGHT 250.00 // (mm) Get this value from G33 auto calibrate + #define DELTA_HEIGHT 200 // (mm) Get this value from G33 auto calibrate #define DELTA_ENDSTOP_ADJ { 0.0, 0.0, 0.0 } // Get these values from G33 auto calibrate // Horizontal distance bridged by diagonal push rods when effector is centered. - #define DELTA_RADIUS 124.0 // (mm) Get this value from G33 auto calibrate + #define DELTA_RADIUS 90.0 // (mm) Get this value from G33 auto calibrate // Trim adjustments for individual towers // tower angle corrections for X and Y tower / rotate XYZ so Z tower angle = 0 // measured in degrees anticlockwise looking from above the printer - #define DELTA_TOWER_ANGLE_TRIM { 0.0, 0.0, 0.0 } // Get these values from G33 auto calibrate + #define DELTA_TOWER_ANGLE_TRIM { 0.70, 0.05, -0.74 } // Get these values from G33 auto calibrate // Delta radius and diagonal rod adjustments (mm) //#define DELTA_RADIUS_TRIM_TOWER { 0.0, 0.0, 0.0 } @@ -778,13 +778,13 @@ #endif // Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define X_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Y_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Z_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Z_MIN_PROBE_ENDSTOP_INVERTING true // Set to true to invert the logic of the probe. +#define X_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. +#define Y_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. +#define Z_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. // G2 false +#define X_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. +#define Y_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. +#define Z_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. +#define Z_MIN_PROBE_ENDSTOP_INVERTING Z_MIN_ENDSTOP_INVERTING // Set to true to invert the logic of the probe. /** * Stepper Drivers @@ -813,7 +813,7 @@ //#define Z3_DRIVER_TYPE A4988 //#define Z4_DRIVER_TYPE A4988 #define E0_DRIVER_TYPE A4988 -//#define E1_DRIVER_TYPE A4988 +#define E1_DRIVER_TYPE A4988 //#define E2_DRIVER_TYPE A4988 //#define E3_DRIVER_TYPE A4988 //#define E4_DRIVER_TYPE A4988 @@ -837,7 +837,7 @@ * * :[2,3,4,5,6,7] */ -//#define ENDSTOP_NOISE_THRESHOLD 2 +#define ENDSTOP_NOISE_THRESHOLD 2 // Check for stuck or disconnected endstops during homing moves. //#define DETECT_BROKEN_ENDSTOP @@ -861,7 +861,7 @@ * following movement settings. If fewer factors are given than the * total number of extruders, the last value applies to the rest. */ -//#define DISTINCT_E_FACTORS +#define DISTINCT_E_FACTORS /** * Default Axis Steps Per Unit (steps/mm) @@ -876,18 +876,18 @@ // delta speeds must be the same on xyz #define DEFAULT_XYZ_STEPS_PER_UNIT ((XYZ_FULL_STEPS_PER_ROTATION) * (XYZ_MICROSTEPS) / double(XYZ_BELT_PITCH) / double(XYZ_PULLEY_TEETH)) -#define DEFAULT_AXIS_STEPS_PER_UNIT { DEFAULT_XYZ_STEPS_PER_UNIT, DEFAULT_XYZ_STEPS_PER_UNIT, DEFAULT_XYZ_STEPS_PER_UNIT, 760*1.1 } // default steps per unit for Kossel (GT2, 20 tooth) +#define DEFAULT_AXIS_STEPS_PER_UNIT { DEFAULT_XYZ_STEPS_PER_UNIT, DEFAULT_XYZ_STEPS_PER_UNIT, DEFAULT_XYZ_STEPS_PER_UNIT, 100 } // default steps per unit for Kossel (GT2, 20 tooth) /** * Default Max Feed Rate (mm/s) * Override with M203 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_FEEDRATE { 500, 500, 500, 25 } +#define DEFAULT_MAX_FEEDRATE { 200, 200, 200, 25 } //#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 #if ENABLED(LIMITED_MAX_FR_EDITING) - #define MAX_FEEDRATE_EDIT_VALUES { 600, 600, 10, 50 } // ...or, set your own edit limits + #define MAX_FEEDRATE_EDIT_VALUES { 600, 600, 600, 50 } // ...or, set your own edit limits #endif /** @@ -896,7 +896,7 @@ * Override with M201 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_ACCELERATION { 9000, 9000, 9000, 10000 } +#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 3000, 10000 } //#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 #if ENABLED(LIMITED_MAX_ACCEL_EDITING) @@ -911,9 +911,9 @@ * M204 R Retract Acceleration * M204 T Travel Acceleration */ -#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves +#define DEFAULT_ACCELERATION 1000 // X, Y, Z and E acceleration for printing moves +#define DEFAULT_RETRACT_ACCELERATION 1000 // E acceleration for retracts +#define DEFAULT_TRAVEL_ACCELERATION 1000 // X, Y, Z acceleration for travel (non printing) moves /** * Default Jerk limits (mm/s) @@ -925,7 +925,7 @@ */ #define CLASSIC_JERK #if ENABLED(CLASSIC_JERK) - #define DEFAULT_XJERK 10.0 + #define DEFAULT_XJERK 8.0 #define DEFAULT_YJERK DEFAULT_XJERK #define DEFAULT_ZJERK DEFAULT_XJERK // Must be same as XY for delta @@ -960,7 +960,7 @@ * * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained */ -//#define S_CURVE_ACCELERATION +#define S_CURVE_ACCELERATION //=========================================================================== //============================= Z Probe Options ============================= @@ -1085,7 +1085,7 @@ * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. Uses Z_MIN_PIN. */ -//#define Z_PROBE_ALLEN_KEY +#define Z_PROBE_ALLEN_KEY #if ENABLED(Z_PROBE_ALLEN_KEY) // 2 or 3 sets of coordinates for deploying and retracting the spring loaded touch probe on G29, @@ -1154,17 +1154,17 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 0, -10, -3.5 } +#define NOZZLE_TO_PROBE_OFFSET { 19, -11, -2 } // G2 { 19, -11, -2 } // Most probes should stay away from the edges of the bed, but // with NOZZLE_AS_PROBE this can be negative for a wider probing area. -#define PROBING_MARGIN 10 +#define PROBING_MARGIN 1 // X and Y axis travel speed (mm/min) between probes -#define XY_PROBE_FEEDRATE (66*60) +#define XY_PROBE_FEEDRATE HOMING_FEEDRATE_Z // Feedrate (mm/min) for the first approach when double-probing (MULTIPLE_PROBING == 2) -#define Z_PROBE_FEEDRATE_FAST (200*60) +#define Z_PROBE_FEEDRATE_FAST (60*60) // Feedrate (mm/min) for the "accurate" probe of each point #define Z_PROBE_FEEDRATE_SLOW (Z_PROBE_FEEDRATE_FAST / 2) @@ -1222,7 +1222,7 @@ * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. */ -#define Z_CLEARANCE_DEPLOY_PROBE 15 // Z Clearance for Deploy/Stow +#define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow #define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points #define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes //#define Z_AFTER_PROBING 5 // Z position after probing is done @@ -1289,21 +1289,21 @@ // @section machine // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR false -#define INVERT_Y_DIR false -#define INVERT_Z_DIR false +#define INVERT_X_DIR true +#define INVERT_Y_DIR true +#define INVERT_Z_DIR true // @section extruder // For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR false -#define INVERT_E1_DIR false -#define INVERT_E2_DIR false -#define INVERT_E3_DIR false -#define INVERT_E4_DIR false -#define INVERT_E5_DIR false -#define INVERT_E6_DIR false -#define INVERT_E7_DIR false +#define INVERT_E0_DIR true +#define INVERT_E1_DIR true +#define INVERT_E2_DIR true +#define INVERT_E3_DIR true +#define INVERT_E4_DIR true +#define INVERT_E5_DIR true +#define INVERT_E6_DIR true +#define INVERT_E7_DIR true // @section homing @@ -1317,7 +1317,7 @@ */ //#define Z_IDLE_HEIGHT Z_HOME_POS -//#define Z_HOMING_HEIGHT 4 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ... +#define Z_HOMING_HEIGHT 4 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ... // Be sure to have this much clearance over your Z_MAX_POS to prevent grinding. //#define Z_AFTER_HOMING 10 // (mm) Height to move to after homing Z @@ -1368,7 +1368,7 @@ #endif #if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS) - //#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD + #define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD #endif /** @@ -1487,7 +1487,7 @@ //#define AUTO_BED_LEVELING_3POINT //#define AUTO_BED_LEVELING_LINEAR //#define AUTO_BED_LEVELING_BILINEAR -//#define AUTO_BED_LEVELING_UBL +#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING /** @@ -1495,7 +1495,7 @@ * these options to restore the prior leveling state or to always enable * leveling immediately after G28. */ -//#define RESTORE_LEVELING_AFTER_G28 +#define RESTORE_LEVELING_AFTER_G28 //#define ENABLE_LEVELING_AFTER_G28 /** @@ -1554,7 +1554,7 @@ // Set the number of grid points per dimension. // Works best with 5 or more points in each dimension. - #define GRID_MAX_POINTS_X 9 + #define GRID_MAX_POINTS_X 5 #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X // Probe along the Y axis, advancing X after each column @@ -1587,7 +1587,7 @@ //#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh #define MESH_INSET 1 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. + #define GRID_MAX_POINTS_X 5 // Don't use more than 15 points per axis, implementation limited. #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X //#define UBL_HILBERT_CURVE // Use Hilbert distribution for less travel when probing multiple points @@ -1595,7 +1595,7 @@ #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 - //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used + #define UBL_Z_RAISE_WHEN_OFF_MESH 0 // When the nozzle is off the mesh, this value is used // as the Z-Height correction value. //#define UBL_MESH_WIZARD // Run several commands in a row to get a complete mesh @@ -1606,7 +1606,7 @@ //=================================== Mesh ================================== //=========================================================================== - #define MESH_INSET 10 // Set Mesh bounds as an inset region of the bed + #define MESH_INSET 1 // Set Mesh bounds as an inset region of the bed #define GRID_MAX_POINTS_X 3 // Don't use more than 7 points per axis, implementation limited. #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X @@ -1633,7 +1633,7 @@ #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner + #define LEVEL_CENTER_TOO // Move to the center after the last corner //#define LEVEL_CORNERS_USE_PROBE #if ENABLED(LEVEL_CORNERS_USE_PROBE) #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1 @@ -1694,8 +1694,9 @@ #define Z_SAFE_HOMING_Y_POINT Y_CENTER // Y point for Z homing #endif -// Delta only homes to Z -#define HOMING_FEEDRATE_MM_M { (200*60), (200*60), (200*60) } +// Homing speeds (mm/min) +#define HOMING_FEEDRATE_Z (60*60) +#define HOMING_FEEDRATE_MM_M { HOMING_FEEDRATE_Z, HOMING_FEEDRATE_Z, HOMING_FEEDRATE_Z } // Validate that endstops are triggered on homing moves #define VALIDATE_HOMING_ENDSTOPS @@ -1772,12 +1773,12 @@ * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) */ -//#define EEPROM_SETTINGS // Persistent storage with M500 and M501 +#define EEPROM_SETTINGS // Persistent storage with M500 and M501 //#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. #define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load #if ENABLED(EEPROM_SETTINGS) - //#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. + #define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. #endif // @@ -1806,16 +1807,16 @@ // Preheat Constants - Up to 5 are supported without changes // #define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 180 -#define PREHEAT_1_TEMP_BED 70 +#define PREHEAT_1_TEMP_HOTEND 200 +#define PREHEAT_1_TEMP_BED 60 #define PREHEAT_1_TEMP_CHAMBER 35 -#define PREHEAT_1_FAN_SPEED 255 // Value from 0 to 255 +#define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 #define PREHEAT_2_LABEL "ABS" -#define PREHEAT_2_TEMP_HOTEND 240 +#define PREHEAT_2_TEMP_HOTEND 250 #define PREHEAT_2_TEMP_BED 100 #define PREHEAT_2_TEMP_CHAMBER 35 -#define PREHEAT_2_FAN_SPEED 255 // Value from 0 to 255 +#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 /** * Nozzle Park @@ -1828,11 +1829,11 @@ * P1 Raise the nozzle always to Z-park height. * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. */ -//#define NOZZLE_PARK_FEATURE +#define NOZZLE_PARK_FEATURE #if ENABLED(NOZZLE_PARK_FEATURE) // Specify a park position as { X, Y, Z_raise } - #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), 0, 20 } + #define NOZZLE_PARK_POINT { 0, 0, 20 } //#define NOZZLE_PARK_X_ONLY // X move only is required to park //#define NOZZLE_PARK_Y_ONLY // Y move only is required to park #define NOZZLE_PARK_Z_RAISE_MIN 2 // (mm) Always raise Z by at least this distance @@ -2036,7 +2037,7 @@ * SD Card support is disabled by default. If your controller has an SD slot, * you must uncomment the following option or it won't work. */ -//#define SDSUPPORT +#define SDSUPPORT /** * SD CARD: ENABLE CRC @@ -2114,7 +2115,7 @@ // If you have a speaker that can produce tones, enable it here. // By default Marlin assumes you have a buzzer with a fixed frequency. // -//#define SPEAKER +#define SPEAKER // // The duration and frequency for the UI feedback sound. @@ -2123,8 +2124,8 @@ // Note: Test audio output with the G-Code: // M300 S P // -//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 -//#define LCD_FEEDBACK_FREQUENCY_HZ 5000 +#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 10 +#define LCD_FEEDBACK_FREQUENCY_HZ 50 //============================================================================= //======================== LCD / Controller Selection ========================= @@ -2137,7 +2138,7 @@ // // Note: Usually sold with a white PCB. // -//#define REPRAP_DISCOUNT_SMART_CONTROLLER +#define REPRAP_DISCOUNT_SMART_CONTROLLER // // GT2560 (YHCB2004) LCD Display @@ -2718,7 +2719,7 @@ // Use software PWM to drive the fan, as for the heaters. This uses a very low frequency // which is not as annoying as with the hardware PWM. On the other hand, if this frequency // is too low, you should also increment SOFT_PWM_SCALE. -//#define FAN_SOFT_PWM +#define FAN_SOFT_PWM // Incrementing this by 1 will double the software PWM frequency, // affecting heaters, and the fan if FAN_SOFT_PWM is enabled. diff --git a/config/examples/delta/Geeetech/G2SPro/Configuration_adv.h b/config/examples/delta/Geeetech/G2SPro/Configuration_adv.h index aa6bbae7e4..17d96e6a40 100644 --- a/config/examples/delta/Geeetech/G2SPro/Configuration_adv.h +++ b/config/examples/delta/Geeetech/G2SPro/Configuration_adv.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "delta/Geeetech/G2SPro" + /** * Configuration_adv.h * @@ -307,7 +309,7 @@ #if ENABLED(PIDTEMP) // Add an experimental additional term to the heater power, proportional to the extrusion speed. // A well-chosen Kc value should add just enough power to melt the increased material volume. - //#define PID_EXTRUSION_SCALING + #define PID_EXTRUSION_SCALING #if ENABLED(PID_EXTRUSION_SCALING) #define DEFAULT_Kc (100) // heating power = Kc * e_speed #define LPQ_MAX_LEN 50 @@ -391,7 +393,7 @@ // Show Temperature ADC value // Enable for M105 to include ADC values read from temperature sensors. -//#define SHOW_TEMP_ADC_VALUES +#define SHOW_TEMP_ADC_VALUES /** * High Temperature Thermistor Support @@ -411,14 +413,14 @@ // The number of consecutive low temperature errors that can occur // before a min_temp_error is triggered. (Shouldn't be more than 10.) -//#define MAX_CONSECUTIVE_LOW_TEMPERATURE_ERROR_ALLOWED 0 +#define MAX_CONSECUTIVE_LOW_TEMPERATURE_ERROR_ALLOWED 10 // The number of milliseconds a hotend will preheat before starting to check // the temperature. This value should NOT be set to the time it takes the // hot end to reach the target temperature, but the time it takes to reach // the minimum temperature your thermistor can read. The lower the better/safer. // This shouldn't need to be more than 30 seconds (30000) -//#define MILLISECONDS_PREHEAT_TIME 0 +#define MILLISECONDS_PREHEAT_TIME 30000 // @section extruder @@ -496,7 +498,7 @@ * * Define one or both of these to override the default 0-255 range. */ -//#define FAN_MIN_PWM 50 +#define FAN_MIN_PWM 50 //#define FAN_MAX_PWM 128 /** @@ -927,9 +929,9 @@ * The Deactive Time can be overridden with M18 and M84. Set to 0 for No Timeout. */ #define DEFAULT_STEPPER_DEACTIVE_TIME 60 -#define DISABLE_INACTIVE_X true -#define DISABLE_INACTIVE_Y true -#define DISABLE_INACTIVE_Z true // Set 'false' if the nozzle could fall onto your printed part! +#define DISABLE_INACTIVE_X false +#define DISABLE_INACTIVE_Y false +#define DISABLE_INACTIVE_Z false // Set 'false' if the nozzle could fall onto your printed part! #define DISABLE_INACTIVE_E true // Default Minimum Feedrates for printing and travel moves @@ -1060,7 +1062,7 @@ * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the * lowest stepping frequencies. */ -//#define ADAPTIVE_STEP_SMOOTHING +#define ADAPTIVE_STEP_SMOOTHING /** * Custom Microstepping @@ -1147,15 +1149,15 @@ // Change values more rapidly when the encoder is rotated faster #define ENCODER_RATE_MULTIPLIER #if ENABLED(ENCODER_RATE_MULTIPLIER) - #define ENCODER_10X_STEPS_PER_SEC 30 // (steps/s) Encoder rate for 10x speed + #define ENCODER_10X_STEPS_PER_SEC 40 // (steps/s) Encoder rate for 10x speed #define ENCODER_100X_STEPS_PER_SEC 80 // (steps/s) Encoder rate for 100x speed #endif // Play a beep when the feedrate is changed from the Status Screen -//#define BEEP_ON_FEEDRATE_CHANGE +#define BEEP_ON_FEEDRATE_CHANGE #if ENABLED(BEEP_ON_FEEDRATE_CHANGE) #define FEEDRATE_CHANGE_BEEP_DURATION 10 - #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 + #define FEEDRATE_CHANGE_BEEP_FREQUENCY 50 #endif #if HAS_LCD_MENU @@ -1177,13 +1179,13 @@ #endif // Include a page of printer information in the LCD Main Menu - //#define LCD_INFO_MENU + #define LCD_INFO_MENU #if ENABLED(LCD_INFO_MENU) //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages #endif // BACK menu items keep the highlight at the top - //#define TURBO_BACK_MENU_ITEM + #define TURBO_BACK_MENU_ITEM // Add a mute option to the LCD menu //#define SOUND_MENU_ITEM @@ -1221,7 +1223,7 @@ #if HAS_DISPLAY // The timeout (in ms) to return to the status screen from sub-menus - //#define LCD_TIMEOUT_TO_STATUS 15000 + #define LCD_TIMEOUT_TO_STATUS 60000 #if ENABLED(SHOW_BOOTSCREEN) #define BOOTSCREEN_TIMEOUT 4000 // (ms) Total Duration to display the boot screen(s) @@ -1231,34 +1233,34 @@ #endif // Scroll a longer status message into view - //#define STATUS_MESSAGE_SCROLLING + #define STATUS_MESSAGE_SCROLLING // On the Info Screen, display XY with one decimal place when possible - //#define LCD_DECIMAL_SMALL_XY + #define LCD_DECIMAL_SMALL_XY // Add an 'M73' G-code to set the current percentage - //#define LCD_SET_PROGRESS_MANUALLY + #define LCD_SET_PROGRESS_MANUALLY // Show the E position (filament used) during printing - //#define LCD_SHOW_E_TOTAL + #define LCD_SHOW_E_TOTAL #endif #if EITHER(SDSUPPORT, LCD_SET_PROGRESS_MANUALLY) && ANY(HAS_MARLINUI_U8GLIB, HAS_MARLINUI_HD44780, IS_TFTGLCD_PANEL, EXTENSIBLE_UI) - //#define SHOW_REMAINING_TIME // Display estimated time to completion + #define SHOW_REMAINING_TIME // Display estimated time to completion #if ENABLED(SHOW_REMAINING_TIME) - //#define USE_M73_REMAINING_TIME // Use remaining time from M73 command instead of estimation - //#define ROTATE_PROGRESS_DISPLAY // Display (P)rogress, (E)lapsed, and (R)emaining time + #define USE_M73_REMAINING_TIME // Use remaining time from M73 command instead of estimation + #define ROTATE_PROGRESS_DISPLAY // Display (P)rogress, (E)lapsed, and (R)emaining time #endif #if EITHER(HAS_MARLINUI_U8GLIB, EXTENSIBLE_UI) - //#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits + #define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits #endif #if EITHER(HAS_MARLINUI_HD44780, IS_TFTGLCD_PANEL) - //#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing + #define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing #if ENABLED(LCD_PROGRESS_BAR) - #define PROGRESS_BAR_BAR_TIME 2000 // (ms) Amount of time to show the bar - #define PROGRESS_BAR_MSG_TIME 3000 // (ms) Amount of time to show the status message + #define PROGRESS_BAR_BAR_TIME 5000 // (ms) Amount of time to show the bar + #define PROGRESS_BAR_MSG_TIME 3500 // (ms) Amount of time to show the status message #define PROGRESS_MSG_EXPIRE 0 // (ms) Amount of time to retain the status message (0=forever) //#define PROGRESS_MSG_ONCE // Show the message for MSG_TIME then clear it //#define LCD_PROGRESS_BAR_TEST // Add a menu item to test the progress bar @@ -1289,8 +1291,8 @@ #define SD_PROCEDURE_DEPTH 1 // Increase if you need more nested M32 calls - #define SD_FINISHED_STEPPERRELEASE true // Disable steppers when SD Print is finished - #define SD_FINISHED_RELEASECOMMAND "M84" // Use "M84XYE" to keep Z enabled so your bed stays in place + #define SD_FINISHED_STEPPERRELEASE true // Disable steppers when SD Print is finished + #define SD_FINISHED_RELEASECOMMAND "M84 E" // Use "M84XYE" to keep Z enabled so your bed stays in place // Reverse SD sort to show "more recent" files first, according to the card's FAT. // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended. @@ -1299,11 +1301,11 @@ #define SD_MENU_CONFIRM_START // Confirm the selected SD file before printing //#define NO_SD_AUTOSTART // Remove auto#.g file support completely to save some Flash, SRAM - //#define MENU_ADDAUTOSTART // Add a menu option to run auto#.g files + #define MENU_ADDAUTOSTART // Add a menu option to run auto#.g files //#define BROWSE_MEDIA_ON_INSERT // Open the file browser when media is inserted - #define EVENT_GCODE_SD_ABORT "G28" // G-code to run on SD Abort Print (e.g., "G28XY" or "G27") + #define EVENT_GCODE_SD_ABORT "G27" // G-code to run on SD Abort Print (e.g., "G28XY" or "G27") #if ENABLED(PRINTER_EVENT_LEDS) #define PE_LEDS_COMPLETED_TIME (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination @@ -1386,7 +1388,7 @@ //#define LONG_FILENAME_HOST_SUPPORT // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES + #define SCROLL_LONG_FILENAMES // Leave the heaters on after Stop Print (not recommended!) //#define SD_ABORT_NO_COOLDOWN @@ -1408,7 +1410,7 @@ /** * Auto-report SdCard status with M27 S */ - //#define AUTO_REPORT_SD_STATUS + #define AUTO_REPORT_SD_STATUS /** * Support for USB thumb drives using an Arduino USB Host Shield or @@ -1514,7 +1516,7 @@ */ #if HAS_MARLINUI_U8GLIB // Show SD percentage next to the progress bar - //#define DOGM_SD_PERCENT + #define DOGM_SD_PERCENT // Save many cycles by drawing a hollow frame or no frame on the Info Screen //#define XYZ_NO_FRAME @@ -1792,20 +1794,20 @@ * * Warning: Does not respect endstops! */ -//#define BABYSTEPPING +#define BABYSTEPPING #if ENABLED(BABYSTEPPING) //#define INTEGRATED_BABYSTEPPING // EXPERIMENTAL integration of babystepping into the Stepper ISR //#define BABYSTEP_WITHOUT_HOMING - //#define BABYSTEP_ALWAYS_AVAILABLE // Allow babystepping at all times (not just during movement). + #define BABYSTEP_ALWAYS_AVAILABLE // Allow babystepping at all times (not just during movement). //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way //#define BABYSTEP_MILLIMETER_UNITS // Specify BABYSTEP_MULTIPLICATOR_(XY|Z) in mm instead of micro-steps #define BABYSTEP_MULTIPLICATOR_Z 1 // (steps or mm) Steps or millimeter distance for each Z babystep #define BABYSTEP_MULTIPLICATOR_XY 1 // (steps or mm) Steps or millimeter distance for each XY babystep - //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. + #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + #define DOUBLECLICK_MAX_INTERVAL 2000 // Maximum interval between clicks, in milliseconds. // Note: Extra time may be added to mitigate controller latency. //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on doubleclick when printer is idle. #if ENABLED(MOVE_Z_WHEN_IDLE) @@ -1839,12 +1841,12 @@ * * See https://marlinfw.org/docs/features/lin_advance.html for full instructions. */ -//#define LIN_ADVANCE +#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants - #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed + #define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants + #define LIN_ADVANCE_K 0 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // If enabled, this will generate debug information output over USB. - //#define EXPERIMENTAL_SCURVE // Enable this option to permit S-Curve Acceleration + #define EXPERIMENTAL_SCURVE // Enable this option to permit S-Curve Acceleration #endif // @section leveling @@ -1984,7 +1986,7 @@ // // G2/G3 Arc Support // -#define ARC_SUPPORT // Disable this feature to save ~3226 bytes +//#define ARC_SUPPORT // Disable this feature to save ~3226 bytes #if ENABLED(ARC_SUPPORT) #define MM_PER_ARC_SEGMENT 1 // (mm) Length (or minimum length) of each arc segment //#define ARC_SEGMENTS_PER_R 1 // Max segment length, MM_PER = Min @@ -2143,7 +2145,7 @@ * Currently handles M108, M112, M410, M876 * NOTE: Not yet implemented for all platforms. */ -//#define EMERGENCY_PARSER +#define EMERGENCY_PARSER /** * Realtime Reporting (requires EMERGENCY_PARSER) @@ -2172,7 +2174,7 @@ //#define NO_TIMEOUTS 1000 // Milliseconds // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. -//#define ADVANCED_OK +#define ADVANCED_OK // Printrun may have trouble receiving long strings all at once. // This option inserts short delays between lines of serial output. @@ -2313,7 +2315,7 @@ * * Enable PARK_HEAD_ON_PAUSE to add the G-code M125 Pause and Park. */ -//#define ADVANCED_PAUSE_FEATURE +#define ADVANCED_PAUSE_FEATURE #if ENABLED(ADVANCED_PAUSE_FEATURE) #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. @@ -2351,11 +2353,11 @@ #define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed. #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change. - //#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. - //#define HOME_BEFORE_FILAMENT_CHANGE // If needed, home before parking for filament change + #define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. + #define HOME_BEFORE_FILAMENT_CHANGE // If needed, home before parking for filament change - //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. - //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) + #define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. + #define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) #endif // @section tmc @@ -3441,7 +3443,7 @@ /** * Disable all Volumetric extrusion options */ -//#define NO_VOLUMETRICS +#define NO_VOLUMETRICS #if DISABLED(NO_VOLUMETRICS) /** @@ -3473,10 +3475,10 @@ * - M206 and M428 are disabled. * - G92 will revert to its behavior from Marlin 1.0. */ -//#define NO_WORKSPACE_OFFSETS +#define NO_WORKSPACE_OFFSETS // Extra options for the M114 "Current Position" report -//#define M114_DETAIL // Use 'M114` for details to check planner calculations +#define M114_DETAIL // Use 'M114` for details to check planner calculations //#define M114_REALTIME // Real current position based on forward kinematics //#define M114_LEGACY // M114 used to synchronize on every call. Enable if needed. @@ -3536,7 +3538,7 @@ * Add G-codes M810-M819 to define and run G-code macros. * Macros are not saved to EEPROM. */ -//#define GCODE_MACROS +#define GCODE_MACROS #if ENABLED(GCODE_MACROS) #define GCODE_MACROS_SLOTS 5 // Up to 10 may be used #define GCODE_MACROS_SLOT_SIZE 50 // Maximum length of a single macro @@ -3550,7 +3552,7 @@ // Custom Menu: Main Menu //#define CUSTOM_MENU_MAIN #if ENABLED(CUSTOM_MENU_MAIN) - //#define CUSTOM_MENU_MAIN_TITLE "Custom Commands" + #define CUSTOM_MENU_MAIN_TITLE "Custom Commands" #define CUSTOM_MENU_MAIN_SCRIPT_DONE "M117 User Script Done" #define CUSTOM_MENU_MAIN_SCRIPT_AUDIBLE_FEEDBACK //#define CUSTOM_MENU_MAIN_SCRIPT_RETURN // Return to status screen after a script @@ -3564,16 +3566,16 @@ #define MAIN_MENU_ITEM_2_GCODE "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND) //#define MAIN_MENU_ITEM_2_CONFIRM - //#define MAIN_MENU_ITEM_3_DESC "Preheat for " PREHEAT_2_LABEL - //#define MAIN_MENU_ITEM_3_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) + #define MAIN_MENU_ITEM_3_DESC "Preheat for " PREHEAT_2_LABEL + #define MAIN_MENU_ITEM_3_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) //#define MAIN_MENU_ITEM_3_CONFIRM - //#define MAIN_MENU_ITEM_4_DESC "Heat Bed/Home/Level" - //#define MAIN_MENU_ITEM_4_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29" + #define MAIN_MENU_ITEM_4_DESC "Heat Bed/Home/Level" + #define MAIN_MENU_ITEM_4_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29" //#define MAIN_MENU_ITEM_4_CONFIRM - //#define MAIN_MENU_ITEM_5_DESC "Home & Info" - //#define MAIN_MENU_ITEM_5_GCODE "G28\nM503" + #define MAIN_MENU_ITEM_5_DESC "Home & Info" + #define MAIN_MENU_ITEM_5_GCODE "G28\nM503" //#define MAIN_MENU_ITEM_5_CONFIRM #endif @@ -3652,9 +3654,9 @@ * Host Prompt Support enables Marlin to use the host for user prompts so * filament runout and other processes can be managed from the host side. */ -//#define HOST_ACTION_COMMANDS +#define HOST_ACTION_COMMANDS #if ENABLED(HOST_ACTION_COMMANDS) - //#define HOST_PROMPT_SUPPORT + #define HOST_PROMPT_SUPPORT //#define HOST_START_MENU_ITEM // Add a menu item that tells the host to start #endif @@ -3663,10 +3665,7 @@ * * Implement M486 to allow Marlin to skip objects */ -//#define CANCEL_OBJECTS -#if ENABLED(CANCEL_OBJECTS) - #define CANCEL_OBJECTS_REPORTING // Emit the current object as a status message -#endif +#define CANCEL_OBJECTS /** * I2C position encoders for closed loop control. diff --git a/config/examples/delta/Geeetech/Rostock 301/Configuration.h b/config/examples/delta/Geeetech/Rostock 301/Configuration.h index 464282b015..838f9bb5e6 100644 --- a/config/examples/delta/Geeetech/Rostock 301/Configuration.h +++ b/config/examples/delta/Geeetech/Rostock 301/Configuration.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "delta/Geeetech/Rostock 301" + /** * Configuration.h * @@ -69,7 +71,7 @@ // @section info // Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes. +#define STRING_CONFIG_H_AUTHOR "(Phr3d13, Geeetech Rostock 301)" // Who made the changes. //#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) /** @@ -102,14 +104,14 @@ * * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] */ -#define SERIAL_PORT 0 +#define SERIAL_PORT 1 /** * Select a secondary serial port on the board to use for communication with the host. * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] */ -//#define SERIAL_PORT_2 -1 +//#define SERIAL_PORT_2 1 /** * Select a third serial port on the board to use for communication with the host. @@ -134,11 +136,11 @@ // Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_RAMPS_14_EFB + #define MOTHERBOARD BOARD_GTM32_PRO_VB #endif // Name displayed in the LCD "Ready" message and Info menu -#define CUSTOM_MACHINE_NAME "Deltabot" +#define CUSTOM_MACHINE_NAME "Rostock 301" // Printer's unique ID, used by some programs to differentiate between machines. // Choose your own or use a service like https://www.uuidgenerator.net/version4 @@ -148,13 +150,13 @@ // This defines the number of extruders // :[0, 1, 2, 3, 4, 5, 6, 7, 8] -#define EXTRUDERS 1 +#define EXTRUDERS 3 // Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc. #define DEFAULT_NOMINAL_FILAMENT_DIA 1.75 // For Cyclops or any "multi-extruder" that shares a single nozzle. -//#define SINGLENOZZLE +#define SINGLENOZZLE // Save and restore temperature and fan speed on tool-change. // Set standby for the unselected tool with M104/106/109 T... @@ -294,7 +296,7 @@ */ //#define MIXING_EXTRUDER #if ENABLED(MIXING_EXTRUDER) - #define MIXING_STEPPERS 2 // Number of steppers in your mixing extruder + #define MIXING_STEPPERS 3 // Number of steppers in your mixing extruder #define MIXING_VIRTUAL_TOOLS 16 // Use the Virtual Tool method with M163 and M164 //#define DIRECT_MIXING_IN_G1 // Allow ABCDHI mix factors in G1 movement commands //#define GRADIENT_MIX // Support for gradient mixing with M166 and LCD @@ -318,7 +320,7 @@ * Enable and connect the power supply to the PS_ON_PIN. * Specify whether the power supply is active HIGH or active LOW. */ -#define PSU_CONTROL +//#define PSU_CONTROL //#define PSU_NAME "Power Supply" #if ENABLED(PSU_CONTROL) @@ -416,7 +418,7 @@ * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. */ -#define TEMP_SENSOR_0 -1 +#define TEMP_SENSOR_0 22 #define TEMP_SENSOR_1 0 #define TEMP_SENSOR_2 0 #define TEMP_SENSOR_3 0 @@ -424,7 +426,7 @@ #define TEMP_SENSOR_5 0 #define TEMP_SENSOR_6 0 #define TEMP_SENSOR_7 0 -#define TEMP_SENSOR_BED 0 +#define TEMP_SENSOR_BED 23 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 #define TEMP_SENSOR_COOLER 0 @@ -693,7 +695,7 @@ // Delta calibration menu // uncomment to add three points calibration menu option. // See http://minow.blogspot.com/index.html#4918805519571907051 - //#define DELTA_CALIBRATION_MENU + #define DELTA_CALIBRATION_MENU // uncomment to add G33 Delta Auto-Calibration (Enable EEPROM_SETTINGS to store results) //#define DELTA_AUTO_CALIBRATION @@ -711,18 +713,18 @@ #endif // Print surface diameter/2 minus unreachable space (avoid collisions with vertical towers). - #define DELTA_PRINTABLE_RADIUS 140.0 // (mm) + #define DELTA_PRINTABLE_RADIUS 90.0 // (mm) // Center-to-center distance of the holes in the diagonal push rods. - #define DELTA_DIAGONAL_ROD 250.0 // (mm) + #define DELTA_DIAGONAL_ROD 196.0 // (mm) // Distance between bed and nozzle Z home position - #define DELTA_HEIGHT 250.00 // (mm) Get this value from G33 auto calibrate + #define DELTA_HEIGHT 228.00 // (mm) Get this value from G33 auto calibrate #define DELTA_ENDSTOP_ADJ { 0.0, 0.0, 0.0 } // Get these values from G33 auto calibrate // Horizontal distance bridged by diagonal push rods when effector is centered. - #define DELTA_RADIUS 124.0 // (mm) Get this value from G33 auto calibrate + #define DELTA_RADIUS 92 // 124.0 // (mm) Get this value from G33 auto calibrate // Trim adjustments for individual towers // tower angle corrections for X and Y tower / rotate XYZ so Z tower angle = 0 @@ -746,7 +748,7 @@ // extra connectors. Leave undefined any used for non-endstop and non-probe purposes. //#define USE_XMIN_PLUG //#define USE_YMIN_PLUG -#define USE_ZMIN_PLUG // a Z probe +//#define USE_ZMIN_PLUG // a Z probe #define USE_XMAX_PLUG #define USE_YMAX_PLUG #define USE_ZMAX_PLUG @@ -781,10 +783,10 @@ #define X_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. #define Y_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. #define Z_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define X_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Y_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Z_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Z_MIN_PROBE_ENDSTOP_INVERTING true // Set to true to invert the logic of the probe. +#define X_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. +#define Y_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. +#define Z_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. +#define Z_MIN_PROBE_ENDSTOP_INVERTING false // Set to true to invert the logic of the probe. /** * Stepper Drivers @@ -813,8 +815,8 @@ //#define Z3_DRIVER_TYPE A4988 //#define Z4_DRIVER_TYPE A4988 #define E0_DRIVER_TYPE A4988 -//#define E1_DRIVER_TYPE A4988 -//#define E2_DRIVER_TYPE A4988 +#define E1_DRIVER_TYPE A4988 +#define E2_DRIVER_TYPE A4988 //#define E3_DRIVER_TYPE A4988 //#define E4_DRIVER_TYPE A4988 //#define E5_DRIVER_TYPE A4988 @@ -875,8 +877,8 @@ #define XYZ_PULLEY_TEETH 20 // delta speeds must be the same on xyz -#define DEFAULT_XYZ_STEPS_PER_UNIT ((XYZ_FULL_STEPS_PER_ROTATION) * (XYZ_MICROSTEPS) / double(XYZ_BELT_PITCH) / double(XYZ_PULLEY_TEETH)) -#define DEFAULT_AXIS_STEPS_PER_UNIT { DEFAULT_XYZ_STEPS_PER_UNIT, DEFAULT_XYZ_STEPS_PER_UNIT, DEFAULT_XYZ_STEPS_PER_UNIT, 760*1.1 } // default steps per unit for Kossel (GT2, 20 tooth) +#define DEFAULT_XYZ_STEPS_PER_UNIT 80.2649 // ((XYZ_FULL_STEPS_PER_ROTATION) * (XYZ_MICROSTEPS) / double(XYZ_BELT_PITCH) / double(XYZ_PULLEY_TEETH)) +#define DEFAULT_AXIS_STEPS_PER_UNIT { DEFAULT_XYZ_STEPS_PER_UNIT, DEFAULT_XYZ_STEPS_PER_UNIT, DEFAULT_XYZ_STEPS_PER_UNIT, 95 } // default steps per unit for Kossel (GT2, 20 tooth) /** * Default Max Feed Rate (mm/s) @@ -1164,7 +1166,7 @@ #define XY_PROBE_FEEDRATE (66*60) // Feedrate (mm/min) for the first approach when double-probing (MULTIPLE_PROBING == 2) -#define Z_PROBE_FEEDRATE_FAST (200*60) +#define Z_PROBE_FEEDRATE_FAST (20*60) // Feedrate (mm/min) for the "accurate" probe of each point #define Z_PROBE_FEEDRATE_SLOW (Z_PROBE_FEEDRATE_FAST / 2) @@ -1289,21 +1291,21 @@ // @section machine // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR false -#define INVERT_Y_DIR false -#define INVERT_Z_DIR false +#define INVERT_X_DIR true +#define INVERT_Y_DIR true +#define INVERT_Z_DIR true // @section extruder // For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR false -#define INVERT_E1_DIR false -#define INVERT_E2_DIR false -#define INVERT_E3_DIR false -#define INVERT_E4_DIR false -#define INVERT_E5_DIR false -#define INVERT_E6_DIR false -#define INVERT_E7_DIR false +#define INVERT_E0_DIR true +#define INVERT_E1_DIR true +#define INVERT_E2_DIR true +#define INVERT_E3_DIR true +#define INVERT_E4_DIR true +#define INVERT_E5_DIR true +#define INVERT_E6_DIR true +#define INVERT_E7_DIR true // @section homing @@ -1324,7 +1326,7 @@ // Direction of endstops when homing; 1=MAX, -1=MIN // :[-1,1] -#define X_HOME_DIR 1 // deltas always home to max +#define X_HOME_DIR 1 #define Y_HOME_DIR 1 #define Z_HOME_DIR 1 @@ -1695,7 +1697,7 @@ #endif // Delta only homes to Z -#define HOMING_FEEDRATE_MM_M { (200*60), (200*60), (200*60) } +#define HOMING_FEEDRATE_MM_M { (20*60), (20*60), (20*60) } // Validate that endstops are triggered on homing moves #define VALIDATE_HOMING_ENDSTOPS @@ -1772,7 +1774,7 @@ * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) */ -//#define EEPROM_SETTINGS // Persistent storage with M500 and M501 +#define EEPROM_SETTINGS // Persistent storage with M500 and M501 //#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. #define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load @@ -1828,7 +1830,7 @@ * P1 Raise the nozzle always to Z-park height. * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. */ -//#define NOZZLE_PARK_FEATURE +#define NOZZLE_PARK_FEATURE #if ENABLED(NOZZLE_PARK_FEATURE) // Specify a park position as { X, Y, Z_raise } @@ -1945,7 +1947,7 @@ * * View the current statistics with M78. */ -//#define PRINTCOUNTER +#define PRINTCOUNTER #if ENABLED(PRINTCOUNTER) #define PRINTCOUNTER_SAVE_INTERVAL 60 // (minutes) EEPROM save interval during print #endif @@ -2036,7 +2038,8 @@ * SD Card support is disabled by default. If your controller has an SD slot, * you must uncomment the following option or it won't work. */ -//#define SDSUPPORT +#define SDSUPPORT +#define SDIO_SUPPORT /** * SD CARD: ENABLE CRC @@ -2114,7 +2117,7 @@ // If you have a speaker that can produce tones, enable it here. // By default Marlin assumes you have a buzzer with a fixed frequency. // -//#define SPEAKER +#define SPEAKER // // The duration and frequency for the UI feedback sound. @@ -2137,7 +2140,7 @@ // // Note: Usually sold with a white PCB. // -//#define REPRAP_DISCOUNT_SMART_CONTROLLER +#define REPRAP_DISCOUNT_SMART_CONTROLLER // // GT2560 (YHCB2004) LCD Display @@ -2718,7 +2721,7 @@ // Use software PWM to drive the fan, as for the heaters. This uses a very low frequency // which is not as annoying as with the hardware PWM. On the other hand, if this frequency // is too low, you should also increment SOFT_PWM_SCALE. -//#define FAN_SOFT_PWM +#define FAN_SOFT_PWM // Incrementing this by 1 will double the software PWM frequency, // affecting heaters, and the fan if FAN_SOFT_PWM is enabled. diff --git a/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h b/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h index aa6bbae7e4..d0b85df054 100644 --- a/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h +++ b/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "delta/Geeetech/Rostock 301" + /** * Configuration_adv.h * @@ -258,7 +260,7 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 20 // Seconds + #define WATCH_TEMP_PERIOD 60 // Seconds, heating is quite slow in Rostock 301 #define WATCH_TEMP_INCREASE 2 // Degrees Celsius #endif @@ -1383,7 +1385,7 @@ //#define UTF_FILENAME_SUPPORT // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT + #define LONG_FILENAME_HOST_SUPPORT // Enable this option to scroll long filenames in the SD card menu //#define SCROLL_LONG_FILENAMES diff --git a/config/examples/delta/Hatchbox_Alpha/Configuration.h b/config/examples/delta/Hatchbox_Alpha/Configuration.h index 464282b015..d873d053af 100644 --- a/config/examples/delta/Hatchbox_Alpha/Configuration.h +++ b/config/examples/delta/Hatchbox_Alpha/Configuration.h @@ -21,6 +21,13 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "delta/Hatchbox_Alpha" + +/** + * Configuration for Hatchbox Alpha with E3D v6 extruder + * http://hatchbox3d.com/Guides/HATCHBOX%20Alpha%203D%20Printer%20User%20Manual.pdf + */ + /** * Configuration.h * @@ -127,18 +134,18 @@ * * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ -#define BAUDRATE 250000 +#define BAUDRATE 115200 // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH // Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_RAMPS_14_EFB + #define MOTHERBOARD BOARD_MKS_GEN_13 #endif // Name displayed in the LCD "Ready" message and Info menu -#define CUSTOM_MACHINE_NAME "Deltabot" +#define CUSTOM_MACHINE_NAME "Hatchbox Alpha" // Printer's unique ID, used by some programs to differentiate between machines. // Choose your own or use a service like https://www.uuidgenerator.net/version4 @@ -416,7 +423,7 @@ * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. */ -#define TEMP_SENSOR_0 -1 +#define TEMP_SENSOR_0 5 #define TEMP_SENSOR_1 0 #define TEMP_SENSOR_2 0 #define TEMP_SENSOR_3 0 @@ -424,7 +431,7 @@ #define TEMP_SENSOR_5 0 #define TEMP_SENSOR_6 0 #define TEMP_SENSOR_7 0 -#define TEMP_SENSOR_BED 0 +#define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 #define TEMP_SENSOR_COOLER 0 @@ -510,16 +517,17 @@ //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) // Set/get with gcode: M301 E[extruder number, 0-2] + // E3D-v6 #if ENABLED(PID_PARAMS_PER_HOTEND) // Specify between 1 and HOTENDS values per array. // If fewer than EXTRUDER values are provided, the last element will be repeated. - #define DEFAULT_Kp_LIST { 22.20, 22.20 } - #define DEFAULT_Ki_LIST { 1.08, 1.08 } - #define DEFAULT_Kd_LIST { 114.00, 114.00 } + #define DEFAULT_Kp_LIST { 18.55, 18.55 } + #define DEFAULT_Ki_LIST { 2.71, 2.71 } + #define DEFAULT_Kd_LIST { 47.69, 47.69 } #else - #define DEFAULT_Kp 22.20 - #define DEFAULT_Ki 1.08 - #define DEFAULT_Kd 114.00 + #define DEFAULT_Kp 18.55 + #define DEFAULT_Ki 2.71 + #define DEFAULT_Kd 47.69 #endif #endif // PIDTEMP @@ -556,11 +564,10 @@ //#define MIN_BED_POWER 0 //#define PID_BED_DEBUG // Sends debug data to the serial port. - // 120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - // from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) - #define DEFAULT_bedKp 10.00 - #define DEFAULT_bedKi .023 - #define DEFAULT_bedKd 305.4 + // HatchBox Alpha + #define DEFAULT_bedKp 72.11 + #define DEFAULT_bedKi 7.1 + #define DEFAULT_bedKd 488.31 // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. #endif // PIDTEMPBED @@ -693,10 +700,10 @@ // Delta calibration menu // uncomment to add three points calibration menu option. // See http://minow.blogspot.com/index.html#4918805519571907051 - //#define DELTA_CALIBRATION_MENU + #define DELTA_CALIBRATION_MENU // uncomment to add G33 Delta Auto-Calibration (Enable EEPROM_SETTINGS to store results) - //#define DELTA_AUTO_CALIBRATION + #define DELTA_AUTO_CALIBRATION // NOTE NB all values for DELTA_* values MUST be floating point, so always have a decimal point in them @@ -711,18 +718,18 @@ #endif // Print surface diameter/2 minus unreachable space (avoid collisions with vertical towers). - #define DELTA_PRINTABLE_RADIUS 140.0 // (mm) + #define DELTA_PRINTABLE_RADIUS 151.0 // (mm) // Center-to-center distance of the holes in the diagonal push rods. - #define DELTA_DIAGONAL_ROD 250.0 // (mm) + #define DELTA_DIAGONAL_ROD 356.5 // (mm) // Distance between bed and nozzle Z home position - #define DELTA_HEIGHT 250.00 // (mm) Get this value from G33 auto calibrate + #define DELTA_HEIGHT 352.00 // (mm) Get this value from G33 auto calibrate #define DELTA_ENDSTOP_ADJ { 0.0, 0.0, 0.0 } // Get these values from G33 auto calibrate // Horizontal distance bridged by diagonal push rods when effector is centered. - #define DELTA_RADIUS 124.0 // (mm) Get this value from G33 auto calibrate + #define DELTA_RADIUS 176.5 // (mm) Get this value from G33 auto calibrate // Trim adjustments for individual towers // tower angle corrections for X and Y tower / rotate XYZ so Z tower angle = 0 @@ -872,18 +879,18 @@ #define XYZ_FULL_STEPS_PER_ROTATION 200 #define XYZ_MICROSTEPS 16 #define XYZ_BELT_PITCH 2 -#define XYZ_PULLEY_TEETH 20 +#define XYZ_PULLEY_TEETH 16 // delta speeds must be the same on xyz #define DEFAULT_XYZ_STEPS_PER_UNIT ((XYZ_FULL_STEPS_PER_ROTATION) * (XYZ_MICROSTEPS) / double(XYZ_BELT_PITCH) / double(XYZ_PULLEY_TEETH)) -#define DEFAULT_AXIS_STEPS_PER_UNIT { DEFAULT_XYZ_STEPS_PER_UNIT, DEFAULT_XYZ_STEPS_PER_UNIT, DEFAULT_XYZ_STEPS_PER_UNIT, 760*1.1 } // default steps per unit for Kossel (GT2, 20 tooth) +#define DEFAULT_AXIS_STEPS_PER_UNIT { DEFAULT_XYZ_STEPS_PER_UNIT, DEFAULT_XYZ_STEPS_PER_UNIT, DEFAULT_XYZ_STEPS_PER_UNIT, 95 } // default steps per unit for Kossel (GT2, 20 tooth) /** * Default Max Feed Rate (mm/s) * Override with M203 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_FEEDRATE { 500, 500, 500, 25 } +#define DEFAULT_MAX_FEEDRATE { 500, 500, 500, 200 } //#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 #if ENABLED(LIMITED_MAX_FR_EDITING) @@ -925,7 +932,7 @@ */ #define CLASSIC_JERK #if ENABLED(CLASSIC_JERK) - #define DEFAULT_XJERK 10.0 + #define DEFAULT_XJERK 20.0 #define DEFAULT_YJERK DEFAULT_XJERK #define DEFAULT_ZJERK DEFAULT_XJERK // Must be same as XY for delta @@ -947,7 +954,7 @@ * https://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html */ #if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.013 // (mm) Distance from real junction edge + #define JUNCTION_DEVIATION_MM 0.053 // (mm) Distance from real junction edge #define JD_HANDLE_SMALL_SEGMENTS // Use curvature estimation instead of just the junction angle // for small segments (< 1mm) with large junction angles (> 135°). #endif @@ -1016,7 +1023,7 @@ * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. * (e.g., an inductive probe or a nozzle-based probe-switch.) */ -//#define FIX_MOUNTED_PROBE +#define FIX_MOUNTED_PROBE /** * Use the nozzle as the probe, as with a conductive @@ -1154,7 +1161,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 0, -10, -3.5 } +#define NOZZLE_TO_PROBE_OFFSET { 0, 0, 0 } // Most probes should stay away from the edges of the bed, but // with NOZZLE_AS_PROBE this can be negative for a wider probing area. @@ -1164,10 +1171,10 @@ #define XY_PROBE_FEEDRATE (66*60) // Feedrate (mm/min) for the first approach when double-probing (MULTIPLE_PROBING == 2) -#define Z_PROBE_FEEDRATE_FAST (200*60) +#define Z_PROBE_FEEDRATE_FAST (200*60)/4 // Feedrate (mm/min) for the "accurate" probe of each point -#define Z_PROBE_FEEDRATE_SLOW (Z_PROBE_FEEDRATE_FAST / 2) +#define Z_PROBE_FEEDRATE_SLOW (Z_PROBE_FEEDRATE_FAST / 4) /** * Probe Activation Switch @@ -1205,7 +1212,7 @@ * A total of 2 does fast/slow probes with a weighted average. * A total of 3 or more adds more slow probes, taking the average. */ -//#define MULTIPLE_PROBING 2 +#define MULTIPLE_PROBING 2 //#define EXTRA_PROBING 1 /** @@ -1249,12 +1256,12 @@ * These options are most useful for the BLTouch probe, but may also improve * readings with inductive probes and piezo sensors. */ -//#define PROBING_HEATERS_OFF // Turn heaters off when probing +#define PROBING_HEATERS_OFF // Turn heaters off when probing #if ENABLED(PROBING_HEATERS_OFF) //#define WAIT_FOR_BED_HEATER // Wait for bed to heat back up between probes (to improve accuracy) //#define WAIT_FOR_HOTEND // Wait for hotend to heat back up between probes (to improve accuracy & prevent cold extrude) #endif -//#define PROBING_FANS_OFF // Turn fans off when probing +#define PROBING_FANS_OFF // Turn fans off when probing //#define PROBING_STEPPERS_OFF // Turn steppers off (unless needed to hold position) when probing //#define DELAY_BEFORE_PROBING 200 // (ms) To prevent vibrations from triggering piezo sensors @@ -1484,7 +1491,7 @@ * leveling in steps so you can manually adjust the Z height at each grid-point. * With an LCD controller the process is guided step-by-step. */ -//#define AUTO_BED_LEVELING_3POINT +#define AUTO_BED_LEVELING_3POINT //#define AUTO_BED_LEVELING_LINEAR //#define AUTO_BED_LEVELING_BILINEAR //#define AUTO_BED_LEVELING_UBL @@ -1772,7 +1779,7 @@ * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) */ -//#define EEPROM_SETTINGS // Persistent storage with M500 and M501 +#define EEPROM_SETTINGS // Persistent storage with M500 and M501 //#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. #define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load @@ -1806,14 +1813,14 @@ // Preheat Constants - Up to 5 are supported without changes // #define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 180 -#define PREHEAT_1_TEMP_BED 70 +#define PREHEAT_1_TEMP_HOTEND 210 +#define PREHEAT_1_TEMP_BED 60 #define PREHEAT_1_TEMP_CHAMBER 35 #define PREHEAT_1_FAN_SPEED 255 // Value from 0 to 255 #define PREHEAT_2_LABEL "ABS" -#define PREHEAT_2_TEMP_HOTEND 240 -#define PREHEAT_2_TEMP_BED 100 +#define PREHEAT_2_TEMP_HOTEND 230 +#define PREHEAT_2_TEMP_BED 105 #define PREHEAT_2_TEMP_CHAMBER 35 #define PREHEAT_2_FAN_SPEED 255 // Value from 0 to 255 @@ -2036,14 +2043,14 @@ * SD Card support is disabled by default. If your controller has an SD slot, * you must uncomment the following option or it won't work. */ -//#define SDSUPPORT +#define SDSUPPORT /** * SD CARD: ENABLE CRC * * Use CRC checks and retries on the SD communication. */ -//#define SD_CHECK_AND_RETRY +#define SD_CHECK_AND_RETRY /** * LCD Menu Items @@ -2295,7 +2302,7 @@ // RepRapDiscount FULL GRAPHIC Smart Controller // https://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller // -//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER +#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER // // K.3D Full Graphic Smart Controller diff --git a/config/examples/delta/Hatchbox_Alpha/Configuration_adv.h b/config/examples/delta/Hatchbox_Alpha/Configuration_adv.h index aa6bbae7e4..9d732e016c 100644 --- a/config/examples/delta/Hatchbox_Alpha/Configuration_adv.h +++ b/config/examples/delta/Hatchbox_Alpha/Configuration_adv.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "delta/Hatchbox_Alpha" + /** * Configuration_adv.h * @@ -1854,12 +1856,12 @@ * Override if the automatically selected points are inadequate. */ #if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL) - //#define PROBE_PT_1_X 15 - //#define PROBE_PT_1_Y 180 - //#define PROBE_PT_2_X 15 - //#define PROBE_PT_2_Y 20 - //#define PROBE_PT_3_X 170 - //#define PROBE_PT_3_Y 20 + #define PROBE_PT_1_X -116 + #define PROBE_PT_1_Y -67.5 + #define PROBE_PT_2_X 116 + #define PROBE_PT_2_Y -67.5 + #define PROBE_PT_3_X 0 + #define PROBE_PT_3_Y 135 #endif /** diff --git a/config/examples/delta/MKS/SBASE/Configuration.h b/config/examples/delta/MKS/SBASE/Configuration.h index 464282b015..575104c6da 100644 --- a/config/examples/delta/MKS/SBASE/Configuration.h +++ b/config/examples/delta/MKS/SBASE/Configuration.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "delta/MKS/SBASE" + /** * Configuration.h * @@ -102,7 +104,7 @@ * * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] */ -#define SERIAL_PORT 0 +#define SERIAL_PORT -1 /** * Select a secondary serial port on the board to use for communication with the host. @@ -134,7 +136,7 @@ // Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_RAMPS_14_EFB + #define MOTHERBOARD BOARD_MKS_SBASE #endif // Name displayed in the LCD "Ready" message and Info menu @@ -324,7 +326,7 @@ #if ENABLED(PSU_CONTROL) #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 + #define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power //#define PSU_POWERUP_GCODE "M355 S1" // G-code to run after power-on (e.g., case light on) @@ -424,7 +426,7 @@ #define TEMP_SENSOR_5 0 #define TEMP_SENSOR_6 0 #define TEMP_SENSOR_7 0 -#define TEMP_SENSOR_BED 0 +#define TEMP_SENSOR_BED 5 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 #define TEMP_SENSOR_COOLER 0 @@ -448,7 +450,7 @@ #define TEMP_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer #define TEMP_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target -#define TEMP_BED_RESIDENCY_TIME 0 // (seconds) Time to wait for bed to "settle" in M190 +#define TEMP_BED_RESIDENCY_TIME 10 // (seconds) Time to wait for bed to "settle" in M190 #define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer #define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target @@ -869,8 +871,8 @@ * X, Y, Z, E0 [, E1[, E2...]] */ // variables to calculate steps -#define XYZ_FULL_STEPS_PER_ROTATION 200 -#define XYZ_MICROSTEPS 16 +#define XYZ_FULL_STEPS_PER_ROTATION 426.67 +#define XYZ_MICROSTEPS 32 #define XYZ_BELT_PITCH 2 #define XYZ_PULLEY_TEETH 20 @@ -1289,7 +1291,7 @@ // @section machine // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR false +#define INVERT_X_DIR false // DELTA does not invert #define INVERT_Y_DIR false #define INVERT_Z_DIR false @@ -1352,7 +1354,7 @@ */ // Min software endstops constrain movement within minimum coordinate bounds -#define MIN_SOFTWARE_ENDSTOPS +//#define MIN_SOFTWARE_ENDSTOPS #if ENABLED(MIN_SOFTWARE_ENDSTOPS) #define MIN_SOFTWARE_ENDSTOP_X #define MIN_SOFTWARE_ENDSTOP_Y @@ -1360,7 +1362,7 @@ #endif // Max software endstops constrain movement within maximum coordinate bounds -#define MAX_SOFTWARE_ENDSTOPS +//#define MAX_SOFTWARE_ENDSTOPS #if ENABLED(MAX_SOFTWARE_ENDSTOPS) #define MAX_SOFTWARE_ENDSTOP_X #define MAX_SOFTWARE_ENDSTOP_Y @@ -1813,7 +1815,7 @@ #define PREHEAT_2_LABEL "ABS" #define PREHEAT_2_TEMP_HOTEND 240 -#define PREHEAT_2_TEMP_BED 100 +#define PREHEAT_2_TEMP_BED 110 #define PREHEAT_2_TEMP_CHAMBER 35 #define PREHEAT_2_FAN_SPEED 255 // Value from 0 to 255 @@ -1832,7 +1834,7 @@ #if ENABLED(NOZZLE_PARK_FEATURE) // Specify a park position as { X, Y, Z_raise } - #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), 0, 20 } + #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 } //#define NOZZLE_PARK_X_ONLY // X move only is required to park //#define NOZZLE_PARK_Y_ONLY // Y move only is required to park #define NOZZLE_PARK_Z_RAISE_MIN 2 // (mm) Always raise Z by at least this distance @@ -2036,7 +2038,7 @@ * SD Card support is disabled by default. If your controller has an SD slot, * you must uncomment the following option or it won't work. */ -//#define SDSUPPORT +#define SDSUPPORT /** * SD CARD: ENABLE CRC diff --git a/config/examples/delta/MKS/SBASE/Configuration_adv.h b/config/examples/delta/MKS/SBASE/Configuration_adv.h index aa6bbae7e4..576f06b01f 100644 --- a/config/examples/delta/MKS/SBASE/Configuration_adv.h +++ b/config/examples/delta/MKS/SBASE/Configuration_adv.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "delta/MKS/SBASE" + /** * Configuration_adv.h * @@ -238,8 +240,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 50 // Seconds + #define THERMAL_PROTECTION_HYSTERESIS 6 // Degrees Celsius //#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops #if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP) @@ -258,7 +260,7 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 20 // Seconds + #define WATCH_TEMP_PERIOD 40 // Seconds #define WATCH_TEMP_INCREASE 2 // Degrees Celsius #endif @@ -266,13 +268,13 @@ * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + #define THERMAL_PROTECTION_BED_PERIOD 110 // Seconds + #define THERMAL_PROTECTION_BED_HYSTERESIS 4 // Degrees Celsius /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds + #define WATCH_BED_TEMP_PERIOD 100 // Seconds #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius #endif @@ -926,7 +928,7 @@ * Set DISABLE_INACTIVE_? 'true' to shut down axis steppers after an idle period. * The Deactive Time can be overridden with M18 and M84. Set to 0 for No Timeout. */ -#define DEFAULT_STEPPER_DEACTIVE_TIME 60 +#define DEFAULT_STEPPER_DEACTIVE_TIME 120 #define DISABLE_INACTIVE_X true #define DISABLE_INACTIVE_Y true #define DISABLE_INACTIVE_Z true // Set 'false' if the nozzle could fall onto your printed part! diff --git a/config/examples/delta/Malyan M300/Configuration.h b/config/examples/delta/Malyan M300/Configuration.h index 464282b015..e1bd47fd1d 100644 --- a/config/examples/delta/Malyan M300/Configuration.h +++ b/config/examples/delta/Malyan M300/Configuration.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "delta/Malyan M300" + /** * Configuration.h * @@ -69,7 +71,7 @@ // @section info // Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes. +#define STRING_CONFIG_H_AUTHOR "(mojocorp, M300 config)" // Who made the changes. //#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) /** @@ -102,7 +104,7 @@ * * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] */ -#define SERIAL_PORT 0 +#define SERIAL_PORT -1 /** * Select a secondary serial port on the board to use for communication with the host. @@ -134,11 +136,11 @@ // Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_RAMPS_14_EFB + #define MOTHERBOARD BOARD_MALYAN_M300 #endif // Name displayed in the LCD "Ready" message and Info menu -#define CUSTOM_MACHINE_NAME "Deltabot" +#define CUSTOM_MACHINE_NAME "Malyan M300" // Printer's unique ID, used by some programs to differentiate between machines. // Choose your own or use a service like https://www.uuidgenerator.net/version4 @@ -318,7 +320,7 @@ * Enable and connect the power supply to the PS_ON_PIN. * Specify whether the power supply is active HIGH or active LOW. */ -#define PSU_CONTROL +//#define PSU_CONTROL //#define PSU_NAME "Power Supply" #if ENABLED(PSU_CONTROL) @@ -416,7 +418,7 @@ * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. */ -#define TEMP_SENSOR_0 -1 +#define TEMP_SENSOR_0 11 #define TEMP_SENSOR_1 0 #define TEMP_SENSOR_2 0 #define TEMP_SENSOR_3 0 @@ -424,7 +426,7 @@ #define TEMP_SENSOR_5 0 #define TEMP_SENSOR_6 0 #define TEMP_SENSOR_7 0 -#define TEMP_SENSOR_BED 0 +#define TEMP_SENSOR_BED 75 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 #define TEMP_SENSOR_COOLER 0 @@ -448,7 +450,7 @@ #define TEMP_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer #define TEMP_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target -#define TEMP_BED_RESIDENCY_TIME 0 // (seconds) Time to wait for bed to "settle" in M190 +#define TEMP_BED_RESIDENCY_TIME 10 // (seconds) Time to wait for bed to "settle" in M190 #define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer #define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target @@ -510,16 +512,17 @@ //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) // Set/get with gcode: M301 E[extruder number, 0-2] + // Malyan M300 #if ENABLED(PID_PARAMS_PER_HOTEND) // Specify between 1 and HOTENDS values per array. // If fewer than EXTRUDER values are provided, the last element will be repeated. - #define DEFAULT_Kp_LIST { 22.20, 22.20 } - #define DEFAULT_Ki_LIST { 1.08, 1.08 } - #define DEFAULT_Kd_LIST { 114.00, 114.00 } + #define DEFAULT_Kp_LIST { 11.79, 11.79 } + #define DEFAULT_Ki_LIST { 0.56, 0.56 } + #define DEFAULT_Kd_LIST { 62.47, 62.47 } #else - #define DEFAULT_Kp 22.20 - #define DEFAULT_Ki 1.08 - #define DEFAULT_Kd 114.00 + #define DEFAULT_Kp 11.79 + #define DEFAULT_Ki 0.56 + #define DEFAULT_Kd 62.47 #endif #endif // PIDTEMP @@ -540,7 +543,7 @@ * heater. If your configuration is significantly different than this and you don't understand * the issues involved, don't use bed PID until someone else verifies that your hardware works. */ -//#define PIDTEMPBED +#define PIDTEMPBED //#define BED_LIMIT_SWITCHING @@ -558,9 +561,9 @@ // 120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) // from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) - #define DEFAULT_bedKp 10.00 - #define DEFAULT_bedKi .023 - #define DEFAULT_bedKd 305.4 + #define DEFAULT_bedKp 18.13 + #define DEFAULT_bedKi 2.58 + #define DEFAULT_bedKd 85.08 // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. #endif // PIDTEMPBED @@ -711,18 +714,18 @@ #endif // Print surface diameter/2 minus unreachable space (avoid collisions with vertical towers). - #define DELTA_PRINTABLE_RADIUS 140.0 // (mm) + #define DELTA_PRINTABLE_RADIUS 60.0 // (mm) // Center-to-center distance of the holes in the diagonal push rods. - #define DELTA_DIAGONAL_ROD 250.0 // (mm) + #define DELTA_DIAGONAL_ROD 120.8 // (mm) // Distance between bed and nozzle Z home position - #define DELTA_HEIGHT 250.00 // (mm) Get this value from G33 auto calibrate + #define DELTA_HEIGHT 113.0 // (mm) Get this value from G33 auto calibrate #define DELTA_ENDSTOP_ADJ { 0.0, 0.0, 0.0 } // Get these values from G33 auto calibrate // Horizontal distance bridged by diagonal push rods when effector is centered. - #define DELTA_RADIUS 124.0 // (mm) Get this value from G33 auto calibrate + #define DELTA_RADIUS 63.0 // (mm) Get this value from G33 auto calibrate // Trim adjustments for individual towers // tower angle corrections for X and Y tower / rotate XYZ so Z tower angle = 0 @@ -731,7 +734,7 @@ // Delta radius and diagonal rod adjustments (mm) //#define DELTA_RADIUS_TRIM_TOWER { 0.0, 0.0, 0.0 } - //#define DELTA_DIAGONAL_ROD_TRIM_TOWER { 0.0, 0.0, 0.0 } + #define DELTA_DIAGONAL_ROD_TRIM_TOWER { 0.0, 0.0, 0.0 } #endif @@ -778,13 +781,13 @@ #endif // Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define X_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Y_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Z_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Z_MIN_PROBE_ENDSTOP_INVERTING true // Set to true to invert the logic of the probe. +#define X_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. +#define Y_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. +#define Z_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define X_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. +#define Y_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. +#define Z_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. +#define Z_MIN_PROBE_ENDSTOP_INVERTING true // Set to true to invert the logic of the probe. /** * Stepper Drivers @@ -847,7 +850,6 @@ //============================================================================= // @section motion -// delta speeds must be the same on xyz /** * Default Settings * @@ -868,15 +870,9 @@ * Override with M92 * X, Y, Z, E0 [, E1[, E2...]] */ -// variables to calculate steps -#define XYZ_FULL_STEPS_PER_ROTATION 200 -#define XYZ_MICROSTEPS 16 -#define XYZ_BELT_PITCH 2 -#define XYZ_PULLEY_TEETH 20 // delta speeds must be the same on xyz -#define DEFAULT_XYZ_STEPS_PER_UNIT ((XYZ_FULL_STEPS_PER_ROTATION) * (XYZ_MICROSTEPS) / double(XYZ_BELT_PITCH) / double(XYZ_PULLEY_TEETH)) -#define DEFAULT_AXIS_STEPS_PER_UNIT { DEFAULT_XYZ_STEPS_PER_UNIT, DEFAULT_XYZ_STEPS_PER_UNIT, DEFAULT_XYZ_STEPS_PER_UNIT, 760*1.1 } // default steps per unit for Kossel (GT2, 20 tooth) +#define DEFAULT_AXIS_STEPS_PER_UNIT { 114.28, 114.28, 114.28, 97.0 } /** * Default Max Feed Rate (mm/s) @@ -896,7 +892,7 @@ * Override with M201 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_ACCELERATION { 9000, 9000, 9000, 10000 } +#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 3000, 10000 } //#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 #if ENABLED(LIMITED_MAX_ACCEL_EDITING) @@ -1010,7 +1006,7 @@ * Use G29 repeatedly, adjusting the Z height at each point with movement commands * or (with LCD_BED_LEVELING) the LCD controller. */ -//#define PROBE_MANUALLY +#define PROBE_MANUALLY /** * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. @@ -1081,38 +1077,9 @@ */ //#define SENSORLESS_PROBING -/** - * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe - * Deploys by touching z-axis belt. Retracts by pushing the probe down. Uses Z_MIN_PIN. - */ -//#define Z_PROBE_ALLEN_KEY - -#if ENABLED(Z_PROBE_ALLEN_KEY) - // 2 or 3 sets of coordinates for deploying and retracting the spring loaded touch probe on G29, - // if servo actuated touch probe is not defined. Uncomment as appropriate for your printer/probe. - - #define Z_PROBE_ALLEN_KEY_DEPLOY_1 { 30.0, DELTA_PRINTABLE_RADIUS, 100.0 } - #define Z_PROBE_ALLEN_KEY_DEPLOY_1_FEEDRATE XY_PROBE_FEEDRATE - - #define Z_PROBE_ALLEN_KEY_DEPLOY_2 { 0.0, DELTA_PRINTABLE_RADIUS, 100.0 } - #define Z_PROBE_ALLEN_KEY_DEPLOY_2_FEEDRATE (XY_PROBE_FEEDRATE)/10 - - #define Z_PROBE_ALLEN_KEY_DEPLOY_3 { 0.0, (DELTA_PRINTABLE_RADIUS) * 0.75, 100.0 } - #define Z_PROBE_ALLEN_KEY_DEPLOY_3_FEEDRATE XY_PROBE_FEEDRATE - - #define Z_PROBE_ALLEN_KEY_STOW_1 { -64.0, 56.0, 23.0 } // Move the probe into position - #define Z_PROBE_ALLEN_KEY_STOW_1_FEEDRATE XY_PROBE_FEEDRATE - - #define Z_PROBE_ALLEN_KEY_STOW_2 { -64.0, 56.0, 3.0 } // Push it down - #define Z_PROBE_ALLEN_KEY_STOW_2_FEEDRATE (XY_PROBE_FEEDRATE)/10 - - #define Z_PROBE_ALLEN_KEY_STOW_3 { -64.0, 56.0, 50.0 } // Move it up to clear - #define Z_PROBE_ALLEN_KEY_STOW_3_FEEDRATE XY_PROBE_FEEDRATE - - #define Z_PROBE_ALLEN_KEY_STOW_4 { 0.0, 0.0, 50.0 } - #define Z_PROBE_ALLEN_KEY_STOW_4_FEEDRATE XY_PROBE_FEEDRATE - -#endif // Z_PROBE_ALLEN_KEY +// +// For Z_PROBE_ALLEN_KEY see the Delta example configurations. +// /** * Nozzle-to-Probe offsets { X, Y, Z } @@ -1154,20 +1121,20 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 0, -10, -3.5 } +#define NOZZLE_TO_PROBE_OFFSET { 0, 0, -0.3 } // Account for switches travel // Most probes should stay away from the edges of the bed, but // with NOZZLE_AS_PROBE this can be negative for a wider probing area. -#define PROBING_MARGIN 10 +#define PROBING_MARGIN 55.0 // X and Y axis travel speed (mm/min) between probes #define XY_PROBE_FEEDRATE (66*60) // Feedrate (mm/min) for the first approach when double-probing (MULTIPLE_PROBING == 2) -#define Z_PROBE_FEEDRATE_FAST (200*60) +#define Z_PROBE_FEEDRATE_FAST (20*60) // Feedrate (mm/min) for the "accurate" probe of each point -#define Z_PROBE_FEEDRATE_SLOW (Z_PROBE_FEEDRATE_FAST / 2) +#define Z_PROBE_FEEDRATE_SLOW (Z_PROBE_FEEDRATE_FAST / 4) /** * Probe Activation Switch @@ -1205,8 +1172,8 @@ * A total of 2 does fast/slow probes with a weighted average. * A total of 3 or more adds more slow probes, taking the average. */ -//#define MULTIPLE_PROBING 2 -//#define EXTRA_PROBING 1 +#define MULTIPLE_PROBING 3 +#define EXTRA_PROBING 1 /** * Z probes require clearance when deploying, stowing, and moving between @@ -1222,7 +1189,7 @@ * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. */ -#define Z_CLEARANCE_DEPLOY_PROBE 15 // Z Clearance for Deploy/Stow +#define Z_CLEARANCE_DEPLOY_PROBE 50 // Z Clearance for Deploy/Stow #define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points #define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes //#define Z_AFTER_PROBING 5 // Z position after probing is done @@ -1296,7 +1263,7 @@ // @section extruder // For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR false +#define INVERT_E0_DIR true #define INVERT_E1_DIR false #define INVERT_E2_DIR false #define INVERT_E3_DIR false @@ -1484,7 +1451,7 @@ * leveling in steps so you can manually adjust the Z height at each grid-point. * With an LCD controller the process is guided step-by-step. */ -//#define AUTO_BED_LEVELING_3POINT +#define AUTO_BED_LEVELING_3POINT //#define AUTO_BED_LEVELING_LINEAR //#define AUTO_BED_LEVELING_BILINEAR //#define AUTO_BED_LEVELING_UBL @@ -1495,7 +1462,7 @@ * these options to restore the prior leveling state or to always enable * leveling immediately after G28. */ -//#define RESTORE_LEVELING_AFTER_G28 +#define RESTORE_LEVELING_AFTER_G28 //#define ENABLE_LEVELING_AFTER_G28 /** @@ -1695,7 +1662,7 @@ #endif // Delta only homes to Z -#define HOMING_FEEDRATE_MM_M { (200*60), (200*60), (200*60) } +#define HOMING_FEEDRATE_MM_M { (200*30), (200*30), (200*30) } // Validate that endstops are triggered on homing moves #define VALIDATE_HOMING_ENDSTOPS @@ -1772,9 +1739,9 @@ * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) */ -//#define EEPROM_SETTINGS // Persistent storage with M500 and M501 +#define EEPROM_SETTINGS // Persistent storage with M500 and M501 //#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! -#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. +//#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. #define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load #if ENABLED(EEPROM_SETTINGS) //#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. @@ -2021,14 +1988,14 @@ * * :['JAPANESE', 'WESTERN', 'CYRILLIC'] */ -#define DISPLAY_CHARSET_HD44780 JAPANESE +//#define DISPLAY_CHARSET_HD44780 JAPANESE /** * Info Screen Style (0:Classic, 1:Průša) * * :[0:'Classic', 1:'Průša'] */ -#define LCD_INFO_SCREEN_STYLE 0 +//#define LCD_INFO_SCREEN_STYLE 0 /** * SD CARD @@ -2036,7 +2003,7 @@ * SD Card support is disabled by default. If your controller has an SD slot, * you must uncomment the following option or it won't work. */ -//#define SDSUPPORT +#define SDSUPPORT /** * SD CARD: ENABLE CRC @@ -2496,7 +2463,7 @@ // // Touch-screen LCD for Malyan M200/M300 printers // -//#define MALYAN_LCD +#define MALYAN_LCD #if ENABLED(MALYAN_LCD) #define LCD_SERIAL_PORT 1 // Default is 1 for Malyan M200 #endif @@ -2718,7 +2685,7 @@ // Use software PWM to drive the fan, as for the heaters. This uses a very low frequency // which is not as annoying as with the hardware PWM. On the other hand, if this frequency // is too low, you should also increment SOFT_PWM_SCALE. -//#define FAN_SOFT_PWM +#define FAN_SOFT_PWM // Incrementing this by 1 will double the software PWM frequency, // affecting heaters, and the fan if FAN_SOFT_PWM is enabled. diff --git a/config/examples/delta/Malyan M300/Configuration_adv.h b/config/examples/delta/Malyan M300/Configuration_adv.h index aa6bbae7e4..874f22ae8e 100644 --- a/config/examples/delta/Malyan M300/Configuration_adv.h +++ b/config/examples/delta/Malyan M300/Configuration_adv.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "delta/Malyan M300" + /** * Configuration_adv.h * @@ -540,7 +542,7 @@ * Multiple extruders can be assigned to the same pin in which case * the fan will turn on when any selected extruder is above the threshold. */ -#define E0_AUTO_FAN_PIN -1 +#define E0_AUTO_FAN_PIN AUTO_FAN_PIN #define E1_AUTO_FAN_PIN -1 #define E2_AUTO_FAN_PIN -1 #define E3_AUTO_FAN_PIN -1 @@ -1280,7 +1282,7 @@ // The standard SD detect circuit reads LOW when media is inserted and HIGH when empty. // Enable this option and set to HIGH if your SD cards are incorrectly detected. - //#define SD_DETECT_STATE HIGH + #define SD_DETECT_STATE HIGH //#define SD_IGNORE_AT_STARTUP // Don't mount the SD card when starting up //#define SDCARD_READONLY // Read-only SD card (to save over 2K of flash) @@ -1289,8 +1291,8 @@ #define SD_PROCEDURE_DEPTH 1 // Increase if you need more nested M32 calls - #define SD_FINISHED_STEPPERRELEASE true // Disable steppers when SD Print is finished - #define SD_FINISHED_RELEASECOMMAND "M84" // Use "M84XYE" to keep Z enabled so your bed stays in place + #define SD_FINISHED_STEPPERRELEASE true // Disable steppers when SD Print is finished + #define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the Z enabled so your bed stays in place. // Reverse SD sort to show "more recent" files first, according to the card's FAT. // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended. @@ -1854,12 +1856,12 @@ * Override if the automatically selected points are inadequate. */ #if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL) - //#define PROBE_PT_1_X 15 - //#define PROBE_PT_1_Y 180 - //#define PROBE_PT_2_X 15 - //#define PROBE_PT_2_Y 20 - //#define PROBE_PT_3_X 170 - //#define PROBE_PT_3_Y 20 + #define PROBE_PT_1_X -43 + #define PROBE_PT_1_Y -25 + #define PROBE_PT_2_X 43 + #define PROBE_PT_2_Y -25 + #define PROBE_PT_3_X 0 + #define PROBE_PT_3_Y 50 #endif /** diff --git a/config/examples/delta/Tevo Little Monster/Configuration.h b/config/examples/delta/Tevo Little Monster/Configuration.h index 464282b015..bdbb6262a9 100644 --- a/config/examples/delta/Tevo Little Monster/Configuration.h +++ b/config/examples/delta/Tevo Little Monster/Configuration.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "delta/Tevo Little Monster" + /** * Configuration.h * @@ -69,7 +71,7 @@ // @section info // Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes. +#define STRING_CONFIG_H_AUTHOR "(HEINRICHS)" // Who made the changes. //#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) /** @@ -109,7 +111,7 @@ * Currently Ethernet (-2) is only supported on Teensy 4.1 boards. * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7] */ -//#define SERIAL_PORT_2 -1 +#define SERIAL_PORT_2 1 /** * Select a third serial port on the board to use for communication with the host. @@ -127,18 +129,18 @@ * * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ -#define BAUDRATE 250000 +#define BAUDRATE 115200 // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH // Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_RAMPS_14_EFB + #define MOTHERBOARD BOARD_MKS_GEN_L #endif // Name displayed in the LCD "Ready" message and Info menu -#define CUSTOM_MACHINE_NAME "Deltabot" +#define CUSTOM_MACHINE_NAME "TEVO Little Monster" // Printer's unique ID, used by some programs to differentiate between machines. // Choose your own or use a service like https://www.uuidgenerator.net/version4 @@ -318,7 +320,7 @@ * Enable and connect the power supply to the PS_ON_PIN. * Specify whether the power supply is active HIGH or active LOW. */ -#define PSU_CONTROL +//#define PSU_CONTROL //#define PSU_NAME "Power Supply" #if ENABLED(PSU_CONTROL) @@ -416,7 +418,7 @@ * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. */ -#define TEMP_SENSOR_0 -1 +#define TEMP_SENSOR_0 1 #define TEMP_SENSOR_1 0 #define TEMP_SENSOR_2 0 #define TEMP_SENSOR_3 0 @@ -424,7 +426,7 @@ #define TEMP_SENSOR_5 0 #define TEMP_SENSOR_6 0 #define TEMP_SENSOR_7 0 -#define TEMP_SENSOR_BED 0 +#define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 #define TEMP_SENSOR_COOLER 0 @@ -448,7 +450,7 @@ #define TEMP_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer #define TEMP_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target -#define TEMP_BED_RESIDENCY_TIME 0 // (seconds) Time to wait for bed to "settle" in M190 +#define TEMP_BED_RESIDENCY_TIME 1 // (seconds) Time to wait for bed to "settle" in M190 #define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer #define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target @@ -505,21 +507,22 @@ #define PID_K1 0.95 // Smoothing factor within any PID loop #if ENABLED(PIDTEMP) - //#define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) - //#define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) + #define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) + #define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) // Set/get with gcode: M301 E[extruder number, 0-2] + // E3D with 30MM fan #if ENABLED(PID_PARAMS_PER_HOTEND) // Specify between 1 and HOTENDS values per array. // If fewer than EXTRUDER values are provided, the last element will be repeated. - #define DEFAULT_Kp_LIST { 22.20, 22.20 } - #define DEFAULT_Ki_LIST { 1.08, 1.08 } - #define DEFAULT_Kd_LIST { 114.00, 114.00 } + #define DEFAULT_Kp_LIST { 41.09, 41.09 } + #define DEFAULT_Ki_LIST { 7.60, 7.60 } + #define DEFAULT_Kd_LIST { 55.54, 55.54 } #else - #define DEFAULT_Kp 22.20 - #define DEFAULT_Ki 1.08 - #define DEFAULT_Kd 114.00 + #define DEFAULT_Kp 41.09 + #define DEFAULT_Ki 7.60 + #define DEFAULT_Kd 55.54 #endif #endif // PIDTEMP @@ -542,7 +545,7 @@ */ //#define PIDTEMPBED -//#define BED_LIMIT_SWITCHING +#define BED_LIMIT_SWITCHING /** * Max Bed Power @@ -634,7 +637,7 @@ * Note: For Bowden Extruders make this large enough to allow load/unload. */ #define PREVENT_LENGTHY_EXTRUDE -#define EXTRUDE_MAXLENGTH 200 +#define EXTRUDE_MAXLENGTH 300 //=========================================================================== //======================== Thermal Runaway Protection ======================= @@ -696,13 +699,13 @@ //#define DELTA_CALIBRATION_MENU // uncomment to add G33 Delta Auto-Calibration (Enable EEPROM_SETTINGS to store results) - //#define DELTA_AUTO_CALIBRATION + #define DELTA_AUTO_CALIBRATION // NOTE NB all values for DELTA_* values MUST be floating point, so always have a decimal point in them #if ENABLED(DELTA_AUTO_CALIBRATION) // set the default number of probe points : n*n (1 -> 7) - #define DELTA_CALIBRATION_DEFAULT_POINTS 4 + #define DELTA_CALIBRATION_DEFAULT_POINTS 7 #endif #if EITHER(DELTA_AUTO_CALIBRATION, DELTA_CALIBRATION_MENU) @@ -711,23 +714,23 @@ #endif // Print surface diameter/2 minus unreachable space (avoid collisions with vertical towers). - #define DELTA_PRINTABLE_RADIUS 140.0 // (mm) + #define DELTA_PRINTABLE_RADIUS 165.0 // (mm) // Center-to-center distance of the holes in the diagonal push rods. - #define DELTA_DIAGONAL_ROD 250.0 // (mm) + #define DELTA_DIAGONAL_ROD 397.19 // (mm) // Distance between bed and nozzle Z home position - #define DELTA_HEIGHT 250.00 // (mm) Get this value from G33 auto calibrate + #define DELTA_HEIGHT 522.27 // (mm) Get this value from G33 auto calibrate - #define DELTA_ENDSTOP_ADJ { 0.0, 0.0, 0.0 } // Get these values from G33 auto calibrate + #define DELTA_ENDSTOP_ADJ { 0.0, -0.12, -0.78 } // Get these values from G33 auto calibrate // Horizontal distance bridged by diagonal push rods when effector is centered. - #define DELTA_RADIUS 124.0 // (mm) Get this value from G33 auto calibrate + #define DELTA_RADIUS 157.39 // (mm) Get this value from G33 auto calibrate // Trim adjustments for individual towers // tower angle corrections for X and Y tower / rotate XYZ so Z tower angle = 0 // measured in degrees anticlockwise looking from above the printer - #define DELTA_TOWER_ANGLE_TRIM { 0.0, 0.0, 0.0 } // Get these values from G33 auto calibrate + #define DELTA_TOWER_ANGLE_TRIM { -0.18, 0.18, 0.0 } // Get these values from G33 auto calibrate // Delta radius and diagonal rod adjustments (mm) //#define DELTA_RADIUS_TRIM_TOWER { 0.0, 0.0, 0.0 } @@ -778,12 +781,12 @@ #endif // Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define X_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. +#define Y_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. #define Z_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define X_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Y_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Z_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define X_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. +#define Y_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. +#define Z_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. #define Z_MIN_PROBE_ENDSTOP_INVERTING true // Set to true to invert the logic of the probe. /** @@ -876,14 +879,14 @@ // delta speeds must be the same on xyz #define DEFAULT_XYZ_STEPS_PER_UNIT ((XYZ_FULL_STEPS_PER_ROTATION) * (XYZ_MICROSTEPS) / double(XYZ_BELT_PITCH) / double(XYZ_PULLEY_TEETH)) -#define DEFAULT_AXIS_STEPS_PER_UNIT { DEFAULT_XYZ_STEPS_PER_UNIT, DEFAULT_XYZ_STEPS_PER_UNIT, DEFAULT_XYZ_STEPS_PER_UNIT, 760*1.1 } // default steps per unit for Kossel (GT2, 20 tooth) +#define DEFAULT_AXIS_STEPS_PER_UNIT { DEFAULT_XYZ_STEPS_PER_UNIT, DEFAULT_XYZ_STEPS_PER_UNIT, DEFAULT_XYZ_STEPS_PER_UNIT, 376.04 } /** * Default Max Feed Rate (mm/s) * Override with M203 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_FEEDRATE { 500, 500, 500, 25 } +#define DEFAULT_MAX_FEEDRATE { 25000, 25000, 25000, 5000 } //#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 #if ENABLED(LIMITED_MAX_FR_EDITING) @@ -911,9 +914,9 @@ * M204 R Retract Acceleration * M204 T Travel Acceleration */ -#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves +#define DEFAULT_ACCELERATION 5000 // X, Y, Z and E acceleration for printing moves #define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves +#define DEFAULT_TRAVEL_ACCELERATION 5000 // X, Y, Z acceleration for travel (non printing) moves /** * Default Jerk limits (mm/s) @@ -947,7 +950,7 @@ * https://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html */ #if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.013 // (mm) Distance from real junction edge + #define JUNCTION_DEVIATION_MM 0.008 // (mm) Distance from real junction edge #define JD_HANDLE_SMALL_SEGMENTS // Use curvature estimation instead of just the junction angle // for small segments (< 1mm) with large junction angles (> 135°). #endif @@ -976,7 +979,7 @@ * The probe replaces the Z-MIN endstop and is used for Z homing. * (Automatically enables USE_PROBE_FOR_Z_HOMING.) */ -#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN +//#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN // Force the use of the probe for Z-axis homing //#define USE_PROBE_FOR_Z_HOMING @@ -1033,7 +1036,7 @@ /** * The BLTouch probe uses a Hall effect sensor and emulates a servo. */ -//#define BLTOUCH +#define BLTOUCH /** * Touch-MI Probe by hotends.fr @@ -1154,11 +1157,11 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 0, -10, -3.5 } +#define NOZZLE_TO_PROBE_OFFSET { 0, 20, -1.10 } // Most probes should stay away from the edges of the bed, but // with NOZZLE_AS_PROBE this can be negative for a wider probing area. -#define PROBING_MARGIN 10 +#define PROBING_MARGIN 20 // X and Y axis travel speed (mm/min) between probes #define XY_PROBE_FEEDRATE (66*60) @@ -1222,10 +1225,10 @@ * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. */ -#define Z_CLEARANCE_DEPLOY_PROBE 15 // Z Clearance for Deploy/Stow -#define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points +#define Z_CLEARANCE_DEPLOY_PROBE 5 // Z Clearance for Deploy/Stow +#define Z_CLEARANCE_BETWEEN_PROBES 2 // Z Clearance between probe points #define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes -//#define Z_AFTER_PROBING 5 // Z position after probing is done +//#define Z_AFTER_PROBING 2 // Z position after probing is done #define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping @@ -1284,19 +1287,19 @@ // @section extruder #define DISABLE_E false // Disable the extruder when not stepping -#define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled +#define DISABLE_INACTIVE_EXTRUDER true // Keep only the active extruder enabled // @section machine // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR false -#define INVERT_Y_DIR false -#define INVERT_Z_DIR false +#define INVERT_X_DIR true +#define INVERT_Y_DIR true +#define INVERT_Z_DIR true // @section extruder // For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR false +#define INVERT_E0_DIR true #define INVERT_E1_DIR false #define INVERT_E2_DIR false #define INVERT_E3_DIR false @@ -1317,7 +1320,7 @@ */ //#define Z_IDLE_HEIGHT Z_HOME_POS -//#define Z_HOMING_HEIGHT 4 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ... +//#define Z_HOMING_HEIGHT 15 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ... // Be sure to have this much clearance over your Z_MAX_POS to prevent grinding. //#define Z_AFTER_HOMING 10 // (mm) Height to move to after homing Z @@ -1352,7 +1355,7 @@ */ // Min software endstops constrain movement within minimum coordinate bounds -#define MIN_SOFTWARE_ENDSTOPS +//#define MIN_SOFTWARE_ENDSTOPS #if ENABLED(MIN_SOFTWARE_ENDSTOPS) #define MIN_SOFTWARE_ENDSTOP_X #define MIN_SOFTWARE_ENDSTOP_Y @@ -1485,7 +1488,7 @@ * With an LCD controller the process is guided step-by-step. */ //#define AUTO_BED_LEVELING_3POINT -//#define AUTO_BED_LEVELING_LINEAR +#define AUTO_BED_LEVELING_LINEAR //#define AUTO_BED_LEVELING_BILINEAR //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING @@ -1554,7 +1557,7 @@ // Set the number of grid points per dimension. // Works best with 5 or more points in each dimension. - #define GRID_MAX_POINTS_X 9 + #define GRID_MAX_POINTS_X 7 #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X // Probe along the Y axis, advancing X after each column @@ -1772,7 +1775,7 @@ * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) */ -//#define EEPROM_SETTINGS // Persistent storage with M500 and M501 +#define EEPROM_SETTINGS // Persistent storage with M500 and M501 //#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. #define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load @@ -1806,8 +1809,8 @@ // Preheat Constants - Up to 5 are supported without changes // #define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 180 -#define PREHEAT_1_TEMP_BED 70 +#define PREHEAT_1_TEMP_HOTEND 195 +#define PREHEAT_1_TEMP_BED 60 #define PREHEAT_1_TEMP_CHAMBER 35 #define PREHEAT_1_FAN_SPEED 255 // Value from 0 to 255 @@ -1828,11 +1831,11 @@ * P1 Raise the nozzle always to Z-park height. * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. */ -//#define NOZZLE_PARK_FEATURE +#define NOZZLE_PARK_FEATURE #if ENABLED(NOZZLE_PARK_FEATURE) // Specify a park position as { X, Y, Z_raise } - #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), 0, 20 } + #define NOZZLE_PARK_POINT { 0, 0, (DELTA_HEIGHT - 10) } //#define NOZZLE_PARK_X_ONLY // X move only is required to park //#define NOZZLE_PARK_Y_ONLY // Y move only is required to park #define NOZZLE_PARK_Z_RAISE_MIN 2 // (mm) Always raise Z by at least this distance diff --git a/config/examples/delta/Tevo Little Monster/Configuration_adv.h b/config/examples/delta/Tevo Little Monster/Configuration_adv.h index aa6bbae7e4..72d0a12679 100644 --- a/config/examples/delta/Tevo Little Monster/Configuration_adv.h +++ b/config/examples/delta/Tevo Little Monster/Configuration_adv.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "delta/Tevo Little Monster" + /** * Configuration_adv.h * @@ -238,8 +240,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 60 // Seconds + #define THERMAL_PROTECTION_HYSTERESIS 10 // Degrees Celsius //#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops #if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP) @@ -540,7 +542,7 @@ * Multiple extruders can be assigned to the same pin in which case * the fan will turn on when any selected extruder is above the threshold. */ -#define E0_AUTO_FAN_PIN -1 +#define E0_AUTO_FAN_PIN HEATER_1_PIN #define E1_AUTO_FAN_PIN -1 #define E2_AUTO_FAN_PIN -1 #define E3_AUTO_FAN_PIN -1 @@ -767,7 +769,7 @@ // Safety: The probe needs time to recognize the command. // Minimum command delay (ms). Enable and increase if needed. - //#define BLTOUCH_DELAY 500 + #define BLTOUCH_DELAY 500 /** * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones: @@ -926,7 +928,7 @@ * Set DISABLE_INACTIVE_? 'true' to shut down axis steppers after an idle period. * The Deactive Time can be overridden with M18 and M84. Set to 0 for No Timeout. */ -#define DEFAULT_STEPPER_DEACTIVE_TIME 60 +#define DEFAULT_STEPPER_DEACTIVE_TIME 0 #define DISABLE_INACTIVE_X true #define DISABLE_INACTIVE_Y true #define DISABLE_INACTIVE_Z true // Set 'false' if the nozzle could fall onto your printed part! @@ -1289,8 +1291,8 @@ #define SD_PROCEDURE_DEPTH 1 // Increase if you need more nested M32 calls - #define SD_FINISHED_STEPPERRELEASE true // Disable steppers when SD Print is finished - #define SD_FINISHED_RELEASECOMMAND "M84" // Use "M84XYE" to keep Z enabled so your bed stays in place + #define SD_FINISHED_STEPPERRELEASE false // Disable steppers when SD Print is finished + #define SD_FINISHED_RELEASECOMMAND "M84" // Use "M84XYE" to keep Z enabled so your bed stays in place // Reverse SD sort to show "more recent" files first, according to the card's FAT. // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended. @@ -1303,7 +1305,7 @@ //#define BROWSE_MEDIA_ON_INSERT // Open the file browser when media is inserted - #define EVENT_GCODE_SD_ABORT "G28" // G-code to run on SD Abort Print (e.g., "G28XY" or "G27") + #define EVENT_GCODE_SD_ABORT "G27" // G-code to run on SD Abort Print (e.g., "G28XY" or "G27") #if ENABLED(PRINTER_EVENT_LEDS) #define PE_LEDS_COMPLETED_TIME (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination diff --git a/config/examples/delta/generic/Configuration.h b/config/examples/delta/generic/Configuration.h index 464282b015..541b5bc33c 100644 --- a/config/examples/delta/generic/Configuration.h +++ b/config/examples/delta/generic/Configuration.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "delta/generic" + /** * Configuration.h * diff --git a/config/examples/delta/generic/Configuration_adv.h b/config/examples/delta/generic/Configuration_adv.h index aa6bbae7e4..27db10e3f5 100644 --- a/config/examples/delta/generic/Configuration_adv.h +++ b/config/examples/delta/generic/Configuration_adv.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "delta/generic" + /** * Configuration_adv.h * diff --git a/config/examples/delta/kossel_clear/Configuration.h b/config/examples/delta/kossel_clear/Configuration.h index 464282b015..24b2433c2e 100644 --- a/config/examples/delta/kossel_clear/Configuration.h +++ b/config/examples/delta/kossel_clear/Configuration.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "delta/kossel_clear" + /** * Configuration.h * @@ -69,7 +71,7 @@ // @section info // Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes. +#define STRING_CONFIG_H_AUTHOR "(John Ecker, Kossel Clear)" // Who made the changes. //#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) /** @@ -134,15 +136,15 @@ // Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_RAMPS_14_EFB + #define MOTHERBOARD BOARD_RAMPS_14_EEB #endif // Name displayed in the LCD "Ready" message and Info menu -#define CUSTOM_MACHINE_NAME "Deltabot" +#define CUSTOM_MACHINE_NAME "Kossel Clear 121519" // Printer's unique ID, used by some programs to differentiate between machines. // Choose your own or use a service like https://www.uuidgenerator.net/version4 -//#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" +#define MACHINE_UUID "4e9a4ab2-1c30-11ea-978f-2e728ce88125" // @section extruder @@ -416,7 +418,7 @@ * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. */ -#define TEMP_SENSOR_0 -1 +#define TEMP_SENSOR_0 1 #define TEMP_SENSOR_1 0 #define TEMP_SENSOR_2 0 #define TEMP_SENSOR_3 0 @@ -424,7 +426,7 @@ #define TEMP_SENSOR_5 0 #define TEMP_SENSOR_6 0 #define TEMP_SENSOR_7 0 -#define TEMP_SENSOR_BED 0 +#define TEMP_SENSOR_BED 1 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 #define TEMP_SENSOR_COOLER 0 @@ -505,8 +507,8 @@ #define PID_K1 0.95 // Smoothing factor within any PID loop #if ENABLED(PIDTEMP) - //#define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) - //#define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) + #define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) + #define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) // Set/get with gcode: M301 E[extruder number, 0-2] @@ -685,24 +687,22 @@ // Make delta curves from many straight lines (linear interpolation). // This is a trade-off between visible corners (not enough segments) // and processor overload (too many expensive sqrt calls). - #define DELTA_SEGMENTS_PER_SECOND 200 + #define DELTA_SEGMENTS_PER_SECOND 160 // After homing move down to a height where XY movement is unconstrained - //#define DELTA_HOME_TO_SAFE_ZONE + #define DELTA_HOME_TO_SAFE_ZONE // Delta calibration menu // uncomment to add three points calibration menu option. // See http://minow.blogspot.com/index.html#4918805519571907051 - //#define DELTA_CALIBRATION_MENU + #define DELTA_CALIBRATION_MENU // uncomment to add G33 Delta Auto-Calibration (Enable EEPROM_SETTINGS to store results) - //#define DELTA_AUTO_CALIBRATION - - // NOTE NB all values for DELTA_* values MUST be floating point, so always have a decimal point in them + #define DELTA_AUTO_CALIBRATION #if ENABLED(DELTA_AUTO_CALIBRATION) // set the default number of probe points : n*n (1 -> 7) - #define DELTA_CALIBRATION_DEFAULT_POINTS 4 + #define DELTA_CALIBRATION_DEFAULT_POINTS 2 #endif #if EITHER(DELTA_AUTO_CALIBRATION, DELTA_CALIBRATION_MENU) @@ -711,23 +711,23 @@ #endif // Print surface diameter/2 minus unreachable space (avoid collisions with vertical towers). - #define DELTA_PRINTABLE_RADIUS 140.0 // (mm) + #define DELTA_PRINTABLE_RADIUS 100 // (mm) // Center-to-center distance of the holes in the diagonal push rods. - #define DELTA_DIAGONAL_ROD 250.0 // (mm) + #define DELTA_DIAGONAL_ROD 290.5 // (mm) Kossel Clear OG Settings // Distance between bed and nozzle Z home position - #define DELTA_HEIGHT 250.00 // (mm) Get this value from G33 auto calibrate + #define DELTA_HEIGHT 283.8 // (mm) Get this value from G33 auto calibrate #define DELTA_ENDSTOP_ADJ { 0.0, 0.0, 0.0 } // Get these values from G33 auto calibrate // Horizontal distance bridged by diagonal push rods when effector is centered. - #define DELTA_RADIUS 124.0 // (mm) Get this value from G33 auto calibrate + #define DELTA_RADIUS 159.0 // (mm) Get this value from G33 auto calibrate // Trim adjustments for individual towers // tower angle corrections for X and Y tower / rotate XYZ so Z tower angle = 0 // measured in degrees anticlockwise looking from above the printer - #define DELTA_TOWER_ANGLE_TRIM { 0.0, 0.0, 0.0 } // Get these values from G33 auto calibrate + #define DELTA_TOWER_ANGLE_TRIM {0.0, 0.0, -0.584 } // Get these values from G33 auto calibrate // Delta radius and diagonal rod adjustments (mm) //#define DELTA_RADIUS_TRIM_TOWER { 0.0, 0.0, 0.0 } @@ -778,13 +778,13 @@ #endif // Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define X_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Y_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Z_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Z_MIN_PROBE_ENDSTOP_INVERTING true // Set to true to invert the logic of the probe. +#define X_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. +#define Y_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. +#define Z_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. +#define X_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. +#define Y_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. +#define Z_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. +#define Z_MIN_PROBE_ENDSTOP_INVERTING false // Set to true to invert the logic of the probe. /** * Stepper Drivers @@ -823,7 +823,7 @@ // Enable this feature if all enabled endstop pins are interrupt-capable. // This will remove the need to poll the interrupt pins, saving many CPU cycles. -//#define ENDSTOP_INTERRUPTS_FEATURE +#define ENDSTOP_INTERRUPTS_FEATURE /** * Endstop Noise Threshold @@ -876,18 +876,18 @@ // delta speeds must be the same on xyz #define DEFAULT_XYZ_STEPS_PER_UNIT ((XYZ_FULL_STEPS_PER_ROTATION) * (XYZ_MICROSTEPS) / double(XYZ_BELT_PITCH) / double(XYZ_PULLEY_TEETH)) -#define DEFAULT_AXIS_STEPS_PER_UNIT { DEFAULT_XYZ_STEPS_PER_UNIT, DEFAULT_XYZ_STEPS_PER_UNIT, DEFAULT_XYZ_STEPS_PER_UNIT, 760*1.1 } // default steps per unit for Kossel (GT2, 20 tooth) +#define DEFAULT_AXIS_STEPS_PER_UNIT { DEFAULT_XYZ_STEPS_PER_UNIT, DEFAULT_XYZ_STEPS_PER_UNIT, DEFAULT_XYZ_STEPS_PER_UNIT, 100 } // default steps per unit for Kossel (GT2, 20 tooth) /** * Default Max Feed Rate (mm/s) * Override with M203 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_FEEDRATE { 500, 500, 500, 25 } +#define DEFAULT_MAX_FEEDRATE { 200, 200, 200, 25 } //#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 #if ENABLED(LIMITED_MAX_FR_EDITING) - #define MAX_FEEDRATE_EDIT_VALUES { 600, 600, 10, 50 } // ...or, set your own edit limits + #define MAX_FEEDRATE_EDIT_VALUES { 600, 600, 200, 50 } // ...or, set your own edit limits #endif /** @@ -896,7 +896,7 @@ * Override with M201 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_ACCELERATION { 9000, 9000, 9000, 10000 } +#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 3000, 10000 } //#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 #if ENABLED(LIMITED_MAX_ACCEL_EDITING) @@ -911,9 +911,9 @@ * M204 R Retract Acceleration * M204 T Travel Acceleration */ -#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves +#define DEFAULT_ACCELERATION 1000 // X, Y, Z and E acceleration for printing moves +#define DEFAULT_RETRACT_ACCELERATION 1000 // E acceleration for retracts +#define DEFAULT_TRAVEL_ACCELERATION 1000 // X, Y, Z acceleration for travel (non printing) moves /** * Default Jerk limits (mm/s) @@ -925,7 +925,7 @@ */ #define CLASSIC_JERK #if ENABLED(CLASSIC_JERK) - #define DEFAULT_XJERK 10.0 + #define DEFAULT_XJERK 8.0 #define DEFAULT_YJERK DEFAULT_XJERK #define DEFAULT_ZJERK DEFAULT_XJERK // Must be same as XY for delta @@ -960,7 +960,7 @@ * * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained */ -//#define S_CURVE_ACCELERATION +#define S_CURVE_ACCELERATION //=========================================================================== //============================= Z Probe Options ============================= @@ -996,7 +996,7 @@ * - normally-closed switches to GND and D32. * - normally-open switches to 5V and D32. */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default +#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default /** * Probe Type @@ -1033,7 +1033,7 @@ /** * The BLTouch probe uses a Hall effect sensor and emulates a servo. */ -//#define BLTOUCH +#define BLTOUCH /** * Touch-MI Probe by hotends.fr @@ -1154,17 +1154,18 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 0, -10, -3.5 } + // BL Touch with John Ecker Custom Mount +#define NOZZLE_TO_PROBE_OFFSET { 0, -29, -3.4 } // Most probes should stay away from the edges of the bed, but // with NOZZLE_AS_PROBE this can be negative for a wider probing area. -#define PROBING_MARGIN 10 +#define PROBING_MARGIN 1 // X and Y axis travel speed (mm/min) between probes -#define XY_PROBE_FEEDRATE (66*60) +#define XY_PROBE_FEEDRATE HOMING_FEEDRATE_Z // Feedrate (mm/min) for the first approach when double-probing (MULTIPLE_PROBING == 2) -#define Z_PROBE_FEEDRATE_FAST (200*60) +#define Z_PROBE_FEEDRATE_FAST (60*60) // Feedrate (mm/min) for the "accurate" probe of each point #define Z_PROBE_FEEDRATE_SLOW (Z_PROBE_FEEDRATE_FAST / 2) @@ -1222,12 +1223,12 @@ * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. */ -#define Z_CLEARANCE_DEPLOY_PROBE 15 // Z Clearance for Deploy/Stow +#define Z_CLEARANCE_DEPLOY_PROBE 50 // Z Clearance for Deploy/Stow #define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points #define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes //#define Z_AFTER_PROBING 5 // Z position after probing is done -#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping +#define Z_PROBE_LOW_POINT -10 // Farthest distance below the trigger-point to go before stopping // For M851 give a range for adjusting the Z probe offset #define Z_PROBE_OFFSET_RANGE_MIN -20 @@ -1256,7 +1257,7 @@ #endif //#define PROBING_FANS_OFF // Turn fans off when probing //#define PROBING_STEPPERS_OFF // Turn steppers off (unless needed to hold position) when probing -//#define DELAY_BEFORE_PROBING 200 // (ms) To prevent vibrations from triggering piezo sensors +#define DELAY_BEFORE_PROBING 375 // (ms) To prevent vibrations from triggering piezo sensors // Require minimum nozzle and/or bed temperature for probing //#define PREHEAT_BEFORE_PROBING @@ -1274,9 +1275,9 @@ // Disable axis steppers immediately when they're not being stepped. // WARNING: When motors turn off there is a chance of losing position accuracy! -#define DISABLE_X false -#define DISABLE_Y false -#define DISABLE_Z false +//#define DISABLE_X false +//#define DISABLE_Y false +//#define DISABLE_Z false // Turn off the display blinking that warns about possible accuracy reduction //#define DISABLE_REDUCED_ACCURACY_WARNING @@ -1317,7 +1318,7 @@ */ //#define Z_IDLE_HEIGHT Z_HOME_POS -//#define Z_HOMING_HEIGHT 4 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ... +#define Z_HOMING_HEIGHT 4 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ... // Be sure to have this much clearance over your Z_MAX_POS to prevent grinding. //#define Z_AFTER_HOMING 10 // (mm) Height to move to after homing Z @@ -1368,7 +1369,7 @@ #endif #if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS) - //#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD + #define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD #endif /** @@ -1486,7 +1487,7 @@ */ //#define AUTO_BED_LEVELING_3POINT //#define AUTO_BED_LEVELING_LINEAR -//#define AUTO_BED_LEVELING_BILINEAR +#define AUTO_BED_LEVELING_BILINEAR //#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING @@ -1495,7 +1496,7 @@ * these options to restore the prior leveling state or to always enable * leveling immediately after G28. */ -//#define RESTORE_LEVELING_AFTER_G28 +#define RESTORE_LEVELING_AFTER_G28 //#define ENABLE_LEVELING_AFTER_G28 /** @@ -1554,7 +1555,7 @@ // Set the number of grid points per dimension. // Works best with 5 or more points in each dimension. - #define GRID_MAX_POINTS_X 9 + #define GRID_MAX_POINTS_X 5 #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X // Probe along the Y axis, advancing X after each column @@ -1586,8 +1587,8 @@ //#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh - #define MESH_INSET 1 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. + #define MESH_INSET 0 // Set Mesh bounds as an inset region of the bed + #define GRID_MAX_POINTS_X 5 // Don't use more than 15 points per axis, implementation limited. #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X //#define UBL_HILBERT_CURVE // Use Hilbert distribution for less travel when probing multiple points @@ -1595,7 +1596,7 @@ #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 - //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used + #define UBL_Z_RAISE_WHEN_OFF_MESH 0 // When the nozzle is off the mesh, this value is used // as the Z-Height correction value. //#define UBL_MESH_WIZARD // Run several commands in a row to get a complete mesh @@ -1606,7 +1607,7 @@ //=================================== Mesh ================================== //=========================================================================== - #define MESH_INSET 10 // Set Mesh bounds as an inset region of the bed + #define MESH_INSET 5 // Set Mesh bounds as an inset region of the bed #define GRID_MAX_POINTS_X 3 // Don't use more than 7 points per axis, implementation limited. #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X @@ -1694,8 +1695,9 @@ #define Z_SAFE_HOMING_Y_POINT Y_CENTER // Y point for Z homing #endif -// Delta only homes to Z -#define HOMING_FEEDRATE_MM_M { (200*60), (200*60), (200*60) } +// Homing speeds (mm/min) +#define HOMING_FEEDRATE_Z (60*60) +#define HOMING_FEEDRATE_MM_M { HOMING_FEEDRATE_Z, HOMING_FEEDRATE_Z, HOMING_FEEDRATE_Z } // Validate that endstops are triggered on homing moves #define VALIDATE_HOMING_ENDSTOPS @@ -1772,12 +1774,12 @@ * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) */ -//#define EEPROM_SETTINGS // Persistent storage with M500 and M501 +#define EEPROM_SETTINGS // Persistent storage with M500 and M501 //#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. #define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load #if ENABLED(EEPROM_SETTINGS) - //#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. + #define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. #endif // @@ -1807,13 +1809,13 @@ // #define PREHEAT_1_LABEL "PLA" #define PREHEAT_1_TEMP_HOTEND 180 -#define PREHEAT_1_TEMP_BED 70 +#define PREHEAT_1_TEMP_BED 60 #define PREHEAT_1_TEMP_CHAMBER 35 #define PREHEAT_1_FAN_SPEED 255 // Value from 0 to 255 #define PREHEAT_2_LABEL "ABS" #define PREHEAT_2_TEMP_HOTEND 240 -#define PREHEAT_2_TEMP_BED 100 +#define PREHEAT_2_TEMP_BED 70 #define PREHEAT_2_TEMP_CHAMBER 35 #define PREHEAT_2_FAN_SPEED 255 // Value from 0 to 255 @@ -1828,11 +1830,11 @@ * P1 Raise the nozzle always to Z-park height. * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. */ -//#define NOZZLE_PARK_FEATURE +#define NOZZLE_PARK_FEATURE #if ENABLED(NOZZLE_PARK_FEATURE) // Specify a park position as { X, Y, Z_raise } - #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), 0, 20 } + #define NOZZLE_PARK_POINT { 0, 0, 20 } //#define NOZZLE_PARK_X_ONLY // X move only is required to park //#define NOZZLE_PARK_Y_ONLY // Y move only is required to park #define NOZZLE_PARK_Z_RAISE_MIN 2 // (mm) Always raise Z by at least this distance @@ -2036,7 +2038,7 @@ * SD Card support is disabled by default. If your controller has an SD slot, * you must uncomment the following option or it won't work. */ -//#define SDSUPPORT +#define SDSUPPORT /** * SD CARD: ENABLE CRC @@ -2114,7 +2116,7 @@ // If you have a speaker that can produce tones, enable it here. // By default Marlin assumes you have a buzzer with a fixed frequency. // -//#define SPEAKER +#define SPEAKER // // The duration and frequency for the UI feedback sound. @@ -2123,8 +2125,8 @@ // Note: Test audio output with the G-Code: // M300 S P // -//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 -//#define LCD_FEEDBACK_FREQUENCY_HZ 5000 +#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 10 +#define LCD_FEEDBACK_FREQUENCY_HZ 50 //============================================================================= //======================== LCD / Controller Selection ========================= @@ -2137,7 +2139,7 @@ // // Note: Usually sold with a white PCB. // -//#define REPRAP_DISCOUNT_SMART_CONTROLLER +#define REPRAP_DISCOUNT_SMART_CONTROLLER // // GT2560 (YHCB2004) LCD Display @@ -2718,7 +2720,7 @@ // Use software PWM to drive the fan, as for the heaters. This uses a very low frequency // which is not as annoying as with the hardware PWM. On the other hand, if this frequency // is too low, you should also increment SOFT_PWM_SCALE. -//#define FAN_SOFT_PWM +#define FAN_SOFT_PWM // Incrementing this by 1 will double the software PWM frequency, // affecting heaters, and the fan if FAN_SOFT_PWM is enabled. @@ -2831,7 +2833,7 @@ * Set this manually if there are extra servos needing manual control. * Set to 0 to turn off servo support. */ -//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command +#define NUM_SERVOS 1 // Servo index starts with 0 for M280 command // (ms) Delay before the next move will start, to give the servo time to reach its target angle. // 300ms is a good value but you can try less delay. diff --git a/config/examples/delta/kossel_clear/Configuration_adv.h b/config/examples/delta/kossel_clear/Configuration_adv.h index aa6bbae7e4..6f7cc7e532 100644 --- a/config/examples/delta/kossel_clear/Configuration_adv.h +++ b/config/examples/delta/kossel_clear/Configuration_adv.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "delta/kossel_clear" + /** * Configuration_adv.h * @@ -377,7 +379,7 @@ * Enable Autotemp Mode with M104/M109 F S B. * Disable by sending M104/M109 with no F parameter (or F0 with AUTOTEMP_PROPORTIONAL). */ -#define AUTOTEMP +//#define AUTOTEMP #if ENABLED(AUTOTEMP) #define AUTOTEMP_OLDWEIGHT 0.98 // Turn on AUTOTEMP on M104/M109 by default using proportions set here @@ -927,9 +929,9 @@ * The Deactive Time can be overridden with M18 and M84. Set to 0 for No Timeout. */ #define DEFAULT_STEPPER_DEACTIVE_TIME 60 -#define DISABLE_INACTIVE_X true -#define DISABLE_INACTIVE_Y true -#define DISABLE_INACTIVE_Z true // Set 'false' if the nozzle could fall onto your printed part! +#define DISABLE_INACTIVE_X false +#define DISABLE_INACTIVE_Y false +#define DISABLE_INACTIVE_Z false // Set 'false' if the nozzle could fall onto your printed part! #define DISABLE_INACTIVE_E true // Default Minimum Feedrates for printing and travel moves @@ -1221,7 +1223,7 @@ #if HAS_DISPLAY // The timeout (in ms) to return to the status screen from sub-menus - //#define LCD_TIMEOUT_TO_STATUS 15000 + #define LCD_TIMEOUT_TO_STATUS 60000 #if ENABLED(SHOW_BOOTSCREEN) #define BOOTSCREEN_TIMEOUT 4000 // (ms) Total Duration to display the boot screen(s) @@ -1792,11 +1794,11 @@ * * Warning: Does not respect endstops! */ -//#define BABYSTEPPING +#define BABYSTEPPING #if ENABLED(BABYSTEPPING) //#define INTEGRATED_BABYSTEPPING // EXPERIMENTAL integration of babystepping into the Stepper ISR //#define BABYSTEP_WITHOUT_HOMING - //#define BABYSTEP_ALWAYS_AVAILABLE // Allow babystepping at all times (not just during movement). + #define BABYSTEP_ALWAYS_AVAILABLE // Allow babystepping at all times (not just during movement). //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way //#define BABYSTEP_MILLIMETER_UNITS // Specify BABYSTEP_MULTIPLICATOR_(XY|Z) in mm instead of micro-steps @@ -1839,12 +1841,12 @@ * * See https://marlinfw.org/docs/features/lin_advance.html for full instructions. */ -//#define LIN_ADVANCE +#define LIN_ADVANCE #if ENABLED(LIN_ADVANCE) //#define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants - #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed + #define LIN_ADVANCE_K 0 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // If enabled, this will generate debug information output over USB. - //#define EXPERIMENTAL_SCURVE // Enable this option to permit S-Curve Acceleration + #define EXPERIMENTAL_SCURVE // Enable this option to permit S-Curve Acceleration #endif // @section leveling @@ -1984,7 +1986,7 @@ // // G2/G3 Arc Support // -#define ARC_SUPPORT // Disable this feature to save ~3226 bytes +//#define ARC_SUPPORT // Disable this feature to save ~3226 bytes #if ENABLED(ARC_SUPPORT) #define MM_PER_ARC_SEGMENT 1 // (mm) Length (or minimum length) of each arc segment //#define ARC_SEGMENTS_PER_R 1 // Max segment length, MM_PER = Min @@ -2172,7 +2174,7 @@ //#define NO_TIMEOUTS 1000 // Milliseconds // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. -//#define ADVANCED_OK +#define ADVANCED_OK // Printrun may have trouble receiving long strings all at once. // This option inserts short delays between lines of serial output. @@ -2313,7 +2315,7 @@ * * Enable PARK_HEAD_ON_PAUSE to add the G-code M125 Pause and Park. */ -//#define ADVANCED_PAUSE_FEATURE +#define ADVANCED_PAUSE_FEATURE #if ENABLED(ADVANCED_PAUSE_FEATURE) #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. @@ -2351,11 +2353,11 @@ #define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed. #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change. - //#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. - //#define HOME_BEFORE_FILAMENT_CHANGE // If needed, home before parking for filament change + #define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. + #define HOME_BEFORE_FILAMENT_CHANGE // If needed, home before parking for filament change - //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. - //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) + #define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. + #define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) #endif // @section tmc @@ -3416,7 +3418,7 @@ /** * Auto-report temperatures with M155 S */ -#define AUTO_REPORT_TEMPERATURES +//#define AUTO_REPORT_TEMPERATURES /** * Auto-report position with M154 S @@ -3426,7 +3428,7 @@ /** * Include capabilities in M115 output */ -#define EXTENDED_CAPABILITIES_REPORT +//#define EXTENDED_CAPABILITIES_REPORT #if ENABLED(EXTENDED_CAPABILITIES_REPORT) //#define M115_GEOMETRY_REPORT #endif @@ -3441,7 +3443,7 @@ /** * Disable all Volumetric extrusion options */ -//#define NO_VOLUMETRICS +#define NO_VOLUMETRICS #if DISABLED(NO_VOLUMETRICS) /** @@ -3473,7 +3475,7 @@ * - M206 and M428 are disabled. * - G92 will revert to its behavior from Marlin 1.0. */ -//#define NO_WORKSPACE_OFFSETS +#define NO_WORKSPACE_OFFSETS // Extra options for the M114 "Current Position" report //#define M114_DETAIL // Use 'M114` for details to check planner calculations @@ -3652,9 +3654,9 @@ * Host Prompt Support enables Marlin to use the host for user prompts so * filament runout and other processes can be managed from the host side. */ -//#define HOST_ACTION_COMMANDS +#define HOST_ACTION_COMMANDS #if ENABLED(HOST_ACTION_COMMANDS) - //#define HOST_PROMPT_SUPPORT + #define HOST_PROMPT_SUPPORT //#define HOST_START_MENU_ITEM // Add a menu item that tells the host to start #endif diff --git a/config/examples/delta/kossel_mini/Configuration.h b/config/examples/delta/kossel_mini/Configuration.h index 464282b015..70330ba400 100644 --- a/config/examples/delta/kossel_mini/Configuration.h +++ b/config/examples/delta/kossel_mini/Configuration.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "delta/kossel_mini" + /** * Configuration.h * @@ -138,7 +140,7 @@ #endif // Name displayed in the LCD "Ready" message and Info menu -#define CUSTOM_MACHINE_NAME "Deltabot" +#define CUSTOM_MACHINE_NAME "Mini Kossel" // Printer's unique ID, used by some programs to differentiate between machines. // Choose your own or use a service like https://www.uuidgenerator.net/version4 @@ -416,7 +418,7 @@ * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. */ -#define TEMP_SENSOR_0 -1 +#define TEMP_SENSOR_0 7 #define TEMP_SENSOR_1 0 #define TEMP_SENSOR_2 0 #define TEMP_SENSOR_3 0 @@ -424,7 +426,7 @@ #define TEMP_SENSOR_5 0 #define TEMP_SENSOR_6 0 #define TEMP_SENSOR_7 0 -#define TEMP_SENSOR_BED 0 +#define TEMP_SENSOR_BED 11 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 #define TEMP_SENSOR_COOLER 0 @@ -442,7 +444,7 @@ // Use temp sensor 1 as a redundant sensor with sensor 0. If the readings // from the two sensors differ too much the print will be aborted. //#define TEMP_SENSOR_1_AS_REDUNDANT -#define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10 +#define MAX_REDUNDANT_TEMP_SENSOR_DIFF 5 #define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 #define TEMP_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer @@ -711,10 +713,10 @@ #endif // Print surface diameter/2 minus unreachable space (avoid collisions with vertical towers). - #define DELTA_PRINTABLE_RADIUS 140.0 // (mm) + #define DELTA_PRINTABLE_RADIUS 90.0 // (mm) // Center-to-center distance of the holes in the diagonal push rods. - #define DELTA_DIAGONAL_ROD 250.0 // (mm) + #define DELTA_DIAGONAL_ROD 215.0 // (mm) // Distance between bed and nozzle Z home position #define DELTA_HEIGHT 250.00 // (mm) Get this value from G33 auto calibrate @@ -722,7 +724,7 @@ #define DELTA_ENDSTOP_ADJ { 0.0, 0.0, 0.0 } // Get these values from G33 auto calibrate // Horizontal distance bridged by diagonal push rods when effector is centered. - #define DELTA_RADIUS 124.0 // (mm) Get this value from G33 auto calibrate + #define DELTA_RADIUS 105.2 // (mm) Get this value from G33 auto calibrate // Trim adjustments for individual towers // tower angle corrections for X and Y tower / rotate XYZ so Z tower angle = 0 @@ -778,13 +780,13 @@ #endif // Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define X_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Y_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Z_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Z_MIN_PROBE_ENDSTOP_INVERTING true // Set to true to invert the logic of the probe. +#define X_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. +#define Y_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. +#define Z_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. +#define X_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. +#define Y_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. +#define Z_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. +#define Z_MIN_PROBE_ENDSTOP_INVERTING false // Set to true to invert the logic of the probe. /** * Stepper Drivers @@ -1085,12 +1087,13 @@ * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. Uses Z_MIN_PIN. */ -//#define Z_PROBE_ALLEN_KEY +#define Z_PROBE_ALLEN_KEY #if ENABLED(Z_PROBE_ALLEN_KEY) // 2 or 3 sets of coordinates for deploying and retracting the spring loaded touch probe on G29, // if servo actuated touch probe is not defined. Uncomment as appropriate for your printer/probe. + // Kossel Mini #define Z_PROBE_ALLEN_KEY_DEPLOY_1 { 30.0, DELTA_PRINTABLE_RADIUS, 100.0 } #define Z_PROBE_ALLEN_KEY_DEPLOY_1_FEEDRATE XY_PROBE_FEEDRATE @@ -1100,16 +1103,17 @@ #define Z_PROBE_ALLEN_KEY_DEPLOY_3 { 0.0, (DELTA_PRINTABLE_RADIUS) * 0.75, 100.0 } #define Z_PROBE_ALLEN_KEY_DEPLOY_3_FEEDRATE XY_PROBE_FEEDRATE + #define Z_PROBE_ALLEN_KEY_STOW_DEPTH 20 #define Z_PROBE_ALLEN_KEY_STOW_1 { -64.0, 56.0, 23.0 } // Move the probe into position #define Z_PROBE_ALLEN_KEY_STOW_1_FEEDRATE XY_PROBE_FEEDRATE - - #define Z_PROBE_ALLEN_KEY_STOW_2 { -64.0, 56.0, 3.0 } // Push it down + // Move the nozzle down further to push the probe into retracted position. + #define Z_PROBE_ALLEN_KEY_STOW_2 { -64.0, 56.0, 23.0-(Z_PROBE_ALLEN_KEY_STOW_DEPTH) } #define Z_PROBE_ALLEN_KEY_STOW_2_FEEDRATE (XY_PROBE_FEEDRATE)/10 + // Raise things back up slightly so we don't bump into anything + #define Z_PROBE_ALLEN_KEY_STOW_3 { -64.0, 56.0, 23.0+(Z_PROBE_ALLEN_KEY_STOW_DEPTH) } + #define Z_PROBE_ALLEN_KEY_STOW_3_FEEDRATE (XY_PROBE_FEEDRATE)/2 - #define Z_PROBE_ALLEN_KEY_STOW_3 { -64.0, 56.0, 50.0 } // Move it up to clear - #define Z_PROBE_ALLEN_KEY_STOW_3_FEEDRATE XY_PROBE_FEEDRATE - - #define Z_PROBE_ALLEN_KEY_STOW_4 { 0.0, 0.0, 50.0 } + #define Z_PROBE_ALLEN_KEY_STOW_4 { 0.0, 0.0, 23.0+(Z_PROBE_ALLEN_KEY_STOW_DEPTH) } #define Z_PROBE_ALLEN_KEY_STOW_4_FEEDRATE XY_PROBE_FEEDRATE #endif // Z_PROBE_ALLEN_KEY @@ -1222,7 +1226,7 @@ * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. */ -#define Z_CLEARANCE_DEPLOY_PROBE 15 // Z Clearance for Deploy/Stow +#define Z_CLEARANCE_DEPLOY_PROBE 50 // Z Clearance for Deploy/Stow #define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points #define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes //#define Z_AFTER_PROBING 5 // Z position after probing is done @@ -1317,7 +1321,7 @@ */ //#define Z_IDLE_HEIGHT Z_HOME_POS -//#define Z_HOMING_HEIGHT 4 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ... +//#define Z_HOMING_HEIGHT 15 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ... // Be sure to have this much clearance over your Z_MAX_POS to prevent grinding. //#define Z_AFTER_HOMING 10 // (mm) Height to move to after homing Z @@ -2167,7 +2171,7 @@ // PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3) // https://reprap.org/wiki/PanelOne // -//#define PANEL_ONE +#define PANEL_ONE // // GADGETS3D G3D LCD/SD Controller diff --git a/config/examples/delta/kossel_pro/Configuration.h b/config/examples/delta/kossel_pro/Configuration.h index 464282b015..a97413031f 100644 --- a/config/examples/delta/kossel_pro/Configuration.h +++ b/config/examples/delta/kossel_pro/Configuration.h @@ -21,6 +21,12 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "delta/kossel_pro" + +/** + * Example configuration file for OpenBeam Kossel Pro + */ + /** * Configuration.h * @@ -127,18 +133,18 @@ * * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] */ -#define BAUDRATE 250000 +#define BAUDRATE 115200 // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH // Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_RAMPS_14_EFB + #define MOTHERBOARD BOARD_BRAINWAVE_PRO #endif // Name displayed in the LCD "Ready" message and Info menu -#define CUSTOM_MACHINE_NAME "Deltabot" +#define CUSTOM_MACHINE_NAME "Kossel Pro" // Printer's unique ID, used by some programs to differentiate between machines. // Choose your own or use a service like https://www.uuidgenerator.net/version4 @@ -318,7 +324,7 @@ * Enable and connect the power supply to the PS_ON_PIN. * Specify whether the power supply is active HIGH or active LOW. */ -#define PSU_CONTROL +//#define PSU_CONTROL //#define PSU_NAME "Power Supply" #if ENABLED(PSU_CONTROL) @@ -416,7 +422,7 @@ * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. */ -#define TEMP_SENSOR_0 -1 +#define TEMP_SENSOR_0 5 #define TEMP_SENSOR_1 0 #define TEMP_SENSOR_2 0 #define TEMP_SENSOR_3 0 @@ -424,7 +430,7 @@ #define TEMP_SENSOR_5 0 #define TEMP_SENSOR_6 0 #define TEMP_SENSOR_7 0 -#define TEMP_SENSOR_BED 0 +#define TEMP_SENSOR_BED 5 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 #define TEMP_SENSOR_COOLER 0 @@ -501,7 +507,7 @@ // Comment the following line to disable PID and enable bang-bang. #define PIDTEMP #define BANG_MAX 255 // Limits current to nozzle while in bang-bang mode; 255=full current -#define PID_MAX BANG_MAX // Limits current to nozzle while PID is active (see PID_FUNCTIONAL_RANGE below); 255=full current +#define PID_MAX 125 // Limits current to nozzle while PID is active (see PID_FUNCTIONAL_RANGE below); 255=full current #define PID_K1 0.95 // Smoothing factor within any PID loop #if ENABLED(PIDTEMP) @@ -510,16 +516,17 @@ //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) // Set/get with gcode: M301 E[extruder number, 0-2] + // Kossel Pro #if ENABLED(PID_PARAMS_PER_HOTEND) // Specify between 1 and HOTENDS values per array. // If fewer than EXTRUDER values are provided, the last element will be repeated. - #define DEFAULT_Kp_LIST { 22.20, 22.20 } - #define DEFAULT_Ki_LIST { 1.08, 1.08 } - #define DEFAULT_Kd_LIST { 114.00, 114.00 } + #define DEFAULT_Kp_LIST { 19.30, 19.30 } + #define DEFAULT_Ki_LIST { 3.51, 3.51 } + #define DEFAULT_Kd_LIST { 26.56, 26.56 } #else - #define DEFAULT_Kp 22.20 - #define DEFAULT_Ki 1.08 - #define DEFAULT_Kd 114.00 + #define DEFAULT_Kp 19.30 + #define DEFAULT_Ki 3.51 + #define DEFAULT_Kd 26.56 #endif #endif // PIDTEMP @@ -540,7 +547,7 @@ * heater. If your configuration is significantly different than this and you don't understand * the issues involved, don't use bed PID until someone else verifies that your hardware works. */ -//#define PIDTEMPBED +#define PIDTEMPBED //#define BED_LIMIT_SWITCHING @@ -556,11 +563,11 @@ //#define MIN_BED_POWER 0 //#define PID_BED_DEBUG // Sends debug data to the serial port. - // 120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - // from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) - #define DEFAULT_bedKp 10.00 - #define DEFAULT_bedKi .023 - #define DEFAULT_bedKd 305.4 + // Kossel Pro heated bed plate with borosilicate glass + // from pidautotune (M303 E-1 S60 C8) + #define DEFAULT_bedKp 370.25 + #define DEFAULT_bedKi 62.77 + #define DEFAULT_bedKd 545.98 // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. #endif // PIDTEMPBED @@ -613,7 +620,7 @@ //#define PID_DEBUG // Sends debug data to the serial port. Use 'M303 D' to toggle activation. //#define PID_OPENLOOP // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX //#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay - #define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature + #define PID_FUNCTIONAL_RANGE 50 // If the temperature difference between the target temperature and the actual temperature // is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max. #endif @@ -685,7 +692,7 @@ // Make delta curves from many straight lines (linear interpolation). // This is a trade-off between visible corners (not enough segments) // and processor overload (too many expensive sqrt calls). - #define DELTA_SEGMENTS_PER_SECOND 200 + #define DELTA_SEGMENTS_PER_SECOND 160 // After homing move down to a height where XY movement is unconstrained //#define DELTA_HOME_TO_SAFE_ZONE @@ -711,18 +718,18 @@ #endif // Print surface diameter/2 minus unreachable space (avoid collisions with vertical towers). - #define DELTA_PRINTABLE_RADIUS 140.0 // (mm) + #define DELTA_PRINTABLE_RADIUS 127.0 // (mm) // Center-to-center distance of the holes in the diagonal push rods. - #define DELTA_DIAGONAL_ROD 250.0 // (mm) + #define DELTA_DIAGONAL_ROD 301.0 // (mm) // Distance between bed and nozzle Z home position - #define DELTA_HEIGHT 250.00 // (mm) Get this value from G33 auto calibrate + #define DELTA_HEIGHT 277.00 // (mm) Get this value from G33 auto calibrate #define DELTA_ENDSTOP_ADJ { 0.0, 0.0, 0.0 } // Get these values from G33 auto calibrate // Horizontal distance bridged by diagonal push rods when effector is centered. - #define DELTA_RADIUS 124.0 // (mm) Get this value from G33 auto calibrate + #define DELTA_RADIUS 152.357 // (mm) Get this value from G33 auto calibrate // Trim adjustments for individual towers // tower angle corrections for X and Y tower / rotate XYZ so Z tower angle = 0 @@ -778,13 +785,13 @@ #endif // Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define X_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Y_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Z_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Z_MIN_PROBE_ENDSTOP_INVERTING true // Set to true to invert the logic of the probe. +#define X_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. +#define Y_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. +#define Z_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. +#define X_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. +#define Y_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. +#define Z_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. +#define Z_MIN_PROBE_ENDSTOP_INVERTING false // Set to true to invert the logic of the probe. /** * Stepper Drivers @@ -847,7 +854,14 @@ //============================================================================= // @section motion +#define XYZ_FULL_STEPS_PER_ROTATION 200 +#define XYZ_MICROSTEPS 32 +#define XYZ_BELT_PITCH 2 +#define XYZ_PULLEY_TEETH 20 + // delta speeds must be the same on xyz +#define XYZ_STEPS ((XYZ_FULL_STEPS_PER_ROTATION) * (XYZ_MICROSTEPS) / double(XYZ_BELT_PITCH) / double(XYZ_PULLEY_TEETH)) + /** * Default Settings * @@ -870,20 +884,20 @@ */ // variables to calculate steps #define XYZ_FULL_STEPS_PER_ROTATION 200 -#define XYZ_MICROSTEPS 16 +#define XYZ_MICROSTEPS 32 #define XYZ_BELT_PITCH 2 #define XYZ_PULLEY_TEETH 20 // delta speeds must be the same on xyz #define DEFAULT_XYZ_STEPS_PER_UNIT ((XYZ_FULL_STEPS_PER_ROTATION) * (XYZ_MICROSTEPS) / double(XYZ_BELT_PITCH) / double(XYZ_PULLEY_TEETH)) -#define DEFAULT_AXIS_STEPS_PER_UNIT { DEFAULT_XYZ_STEPS_PER_UNIT, DEFAULT_XYZ_STEPS_PER_UNIT, DEFAULT_XYZ_STEPS_PER_UNIT, 760*1.1 } // default steps per unit for Kossel (GT2, 20 tooth) +#define DEFAULT_AXIS_STEPS_PER_UNIT { DEFAULT_XYZ_STEPS_PER_UNIT, DEFAULT_XYZ_STEPS_PER_UNIT, DEFAULT_XYZ_STEPS_PER_UNIT, 184.8 } // default steps per unit for Kossel (GT2, 20 tooth) /** * Default Max Feed Rate (mm/s) * Override with M203 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_FEEDRATE { 500, 500, 500, 25 } +#define DEFAULT_MAX_FEEDRATE { 200, 200, 200, 200 } //#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 #if ENABLED(LIMITED_MAX_FR_EDITING) @@ -896,7 +910,7 @@ * Override with M201 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_ACCELERATION { 9000, 9000, 9000, 10000 } +#define DEFAULT_MAX_ACCELERATION { 9000, 9000, 9000, 9000 } //#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 #if ENABLED(LIMITED_MAX_ACCEL_EDITING) @@ -976,7 +990,7 @@ * The probe replaces the Z-MIN endstop and is used for Z homing. * (Automatically enables USE_PROBE_FOR_Z_HOMING.) */ -#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN +//#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN // Force the use of the probe for Z-axis homing //#define USE_PROBE_FOR_Z_HOMING @@ -1085,31 +1099,35 @@ * Allen key retractable z-probe as seen on many Kossel delta printers - https://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe * Deploys by touching z-axis belt. Retracts by pushing the probe down. Uses Z_MIN_PIN. */ -//#define Z_PROBE_ALLEN_KEY +#define Z_PROBE_ALLEN_KEY #if ENABLED(Z_PROBE_ALLEN_KEY) // 2 or 3 sets of coordinates for deploying and retracting the spring loaded touch probe on G29, // if servo actuated touch probe is not defined. Uncomment as appropriate for your printer/probe. - #define Z_PROBE_ALLEN_KEY_DEPLOY_1 { 30.0, DELTA_PRINTABLE_RADIUS, 100.0 } + // Kossel Pro + #define Z_PROBE_ALLEN_KEY_DEPLOY_1 { -105.00, 0.00, 100.0 } // Move left but not quite so far that we'll bump the belt #define Z_PROBE_ALLEN_KEY_DEPLOY_1_FEEDRATE XY_PROBE_FEEDRATE - #define Z_PROBE_ALLEN_KEY_DEPLOY_2 { 0.0, DELTA_PRINTABLE_RADIUS, 100.0 } - #define Z_PROBE_ALLEN_KEY_DEPLOY_2_FEEDRATE (XY_PROBE_FEEDRATE)/10 + #define Z_PROBE_ALLEN_KEY_DEPLOY_2 { -110.00, -125.00, 100.0 } // Move outward to position deploy pin to the left of the arm + #define Z_PROBE_ALLEN_KEY_DEPLOY_2_FEEDRATE XY_PROBE_FEEDRATE - #define Z_PROBE_ALLEN_KEY_DEPLOY_3 { 0.0, (DELTA_PRINTABLE_RADIUS) * 0.75, 100.0 } + #define Z_PROBE_ALLEN_KEY_DEPLOY_3 { -110.00 * 0.75, -125.00 * 0.75, 100.0 } #define Z_PROBE_ALLEN_KEY_DEPLOY_3_FEEDRATE XY_PROBE_FEEDRATE - #define Z_PROBE_ALLEN_KEY_STOW_1 { -64.0, 56.0, 23.0 } // Move the probe into position + #define Z_PROBE_ALLEN_KEY_DEPLOY_4 { 45.00, -125.00, 100.0 } // Move right to trigger deploy pin + #define Z_PROBE_ALLEN_KEY_DEPLOY_4_FEEDRATE (XY_PROBE_FEEDRATE)/2 + + #define Z_PROBE_ALLEN_KEY_STOW_1 { 36.00, -125.00, 75.0 } // Line up with bed retaining clip #define Z_PROBE_ALLEN_KEY_STOW_1_FEEDRATE XY_PROBE_FEEDRATE - #define Z_PROBE_ALLEN_KEY_STOW_2 { -64.0, 56.0, 3.0 } // Push it down - #define Z_PROBE_ALLEN_KEY_STOW_2_FEEDRATE (XY_PROBE_FEEDRATE)/10 + #define Z_PROBE_ALLEN_KEY_STOW_2 { 36.00, -125.00, 0.0 } // move down to retract probe + #define Z_PROBE_ALLEN_KEY_STOW_2_FEEDRATE (XY_PROBE_FEEDRATE)/2 - #define Z_PROBE_ALLEN_KEY_STOW_3 { -64.0, 56.0, 50.0 } // Move it up to clear + #define Z_PROBE_ALLEN_KEY_STOW_3 { 0.0, 0.0, 100.0 } // return to 0,0,100 #define Z_PROBE_ALLEN_KEY_STOW_3_FEEDRATE XY_PROBE_FEEDRATE - #define Z_PROBE_ALLEN_KEY_STOW_4 { 0.0, 0.0, 50.0 } + #define Z_PROBE_ALLEN_KEY_STOW_4 { 0.0, 0.0, 100.0 } #define Z_PROBE_ALLEN_KEY_STOW_4_FEEDRATE XY_PROBE_FEEDRATE #endif // Z_PROBE_ALLEN_KEY @@ -1154,14 +1172,18 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 0, -10, -3.5 } +#define NOZZLE_TO_PROBE_OFFSET { -23, -6, -17.25 } // KosselPro actual: -22.919, -6.304, -17.45 +/** + * Kossel Pro note: The correct value is likely -17.45 but I'd rather err on the side of + * not giving someone a head crash. Use something like G29 Z-0.2 to adjust as needed. + */ // Most probes should stay away from the edges of the bed, but // with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed (mm/min) between probes -#define XY_PROBE_FEEDRATE (66*60) +#define XY_PROBE_FEEDRATE (133*60) // Feedrate (mm/min) for the first approach when double-probing (MULTIPLE_PROBING == 2) #define Z_PROBE_FEEDRATE_FAST (200*60) @@ -1222,16 +1244,17 @@ * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. */ -#define Z_CLEARANCE_DEPLOY_PROBE 15 // Z Clearance for Deploy/Stow -#define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points +#define Z_CLEARANCE_DEPLOY_PROBE 100 // Z Clearance for Deploy/Stow +#define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points #define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes -//#define Z_AFTER_PROBING 5 // Z position after probing is done +//#define Z_AFTER_PROBING 5 // Z position after probing is done #define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping // For M851 give a range for adjusting the Z probe offset -#define Z_PROBE_OFFSET_RANGE_MIN -20 -#define Z_PROBE_OFFSET_RANGE_MAX 20 + +#define Z_PROBE_OFFSET_RANGE_MIN -15 +#define Z_PROBE_OFFSET_RANGE_MAX 5 // Enable the M48 repeatability test to test probe accuracy //#define Z_MIN_PROBE_REPEATABILITY_TEST @@ -1289,14 +1312,14 @@ // @section machine // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR false -#define INVERT_Y_DIR false -#define INVERT_Z_DIR false +#define INVERT_X_DIR true +#define INVERT_Y_DIR true +#define INVERT_Z_DIR true // @section extruder // For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR false +#define INVERT_E0_DIR true #define INVERT_E1_DIR false #define INVERT_E2_DIR false #define INVERT_E3_DIR false @@ -1554,7 +1577,7 @@ // Set the number of grid points per dimension. // Works best with 5 or more points in each dimension. - #define GRID_MAX_POINTS_X 9 + #define GRID_MAX_POINTS_X 7 #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X // Probe along the Y axis, advancing X after each column @@ -1687,7 +1710,7 @@ // - Move the Z probe (or nozzle) to a defined XY point before Z Homing. // - Prevent Z homing when the Z probe is outside bed area. // -//#define Z_SAFE_HOMING +#define Z_SAFE_HOMING #if ENABLED(Z_SAFE_HOMING) #define Z_SAFE_HOMING_X_POINT X_CENTER // X point for Z homing @@ -2036,7 +2059,7 @@ * SD Card support is disabled by default. If your controller has an SD slot, * you must uncomment the following option or it won't work. */ -//#define SDSUPPORT +#define SDSUPPORT /** * SD CARD: ENABLE CRC diff --git a/config/examples/delta/kossel_xl/Configuration.h b/config/examples/delta/kossel_xl/Configuration.h index 464282b015..a38efd149f 100644 --- a/config/examples/delta/kossel_xl/Configuration.h +++ b/config/examples/delta/kossel_xl/Configuration.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "delta/kossel_xl" + /** * Configuration.h * @@ -69,7 +71,7 @@ // @section info // Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes. +#define STRING_CONFIG_H_AUTHOR "(oxivanisher)" // Who made the changes. //#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) /** @@ -138,7 +140,7 @@ #endif // Name displayed in the LCD "Ready" message and Info menu -#define CUSTOM_MACHINE_NAME "Deltabot" +#define CUSTOM_MACHINE_NAME "Kossel k800XL" // Printer's unique ID, used by some programs to differentiate between machines. // Choose your own or use a service like https://www.uuidgenerator.net/version4 @@ -322,7 +324,7 @@ //#define PSU_NAME "Power Supply" #if ENABLED(PSU_CONTROL) - #define PSU_ACTIVE_STATE LOW // Set 'LOW' for ATX, 'HIGH' for X-Box + #define PSU_ACTIVE_STATE HIGH // Set 'LOW' for ATX, 'HIGH' for X-Box //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 //#define PSU_POWERUP_DELAY 250 // (ms) Delay for the PSU to warm up to full power @@ -416,7 +418,7 @@ * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. */ -#define TEMP_SENSOR_0 -1 +#define TEMP_SENSOR_0 5 #define TEMP_SENSOR_1 0 #define TEMP_SENSOR_2 0 #define TEMP_SENSOR_3 0 @@ -424,7 +426,7 @@ #define TEMP_SENSOR_5 0 #define TEMP_SENSOR_6 0 #define TEMP_SENSOR_7 0 -#define TEMP_SENSOR_BED 0 +#define TEMP_SENSOR_BED 5 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 #define TEMP_SENSOR_COOLER 0 @@ -513,13 +515,19 @@ #if ENABLED(PID_PARAMS_PER_HOTEND) // Specify between 1 and HOTENDS values per array. // If fewer than EXTRUDER values are provided, the last element will be repeated. - #define DEFAULT_Kp_LIST { 22.20, 22.20 } - #define DEFAULT_Ki_LIST { 1.08, 1.08 } - #define DEFAULT_Kd_LIST { 114.00, 114.00 } + #define DEFAULT_Kp_LIST { 22.04, 22.04 } + #define DEFAULT_Ki_LIST { 1.65, 1.65 } + #define DEFAULT_Kd_LIST { 73.67, 73.67 } #else - #define DEFAULT_Kp 22.20 - #define DEFAULT_Ki 1.08 - #define DEFAULT_Kd 114.00 + // oXis Kossel k800 XL + #define DEFAULT_Kp 22.04 + #define DEFAULT_Ki 1.65 + #define DEFAULT_Kd 73.67 + + // Kossel k800 XL + //#define DEFAULT_Kp 22.25 + //#define DEFAULT_Ki 1.45 + //#define DEFAULT_Kd 85.30 #endif #endif // PIDTEMP @@ -558,8 +566,8 @@ // 120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) // from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) - #define DEFAULT_bedKp 10.00 - #define DEFAULT_bedKi .023 + #define DEFAULT_bedKp 15.00 + #define DEFAULT_bedKi .04 #define DEFAULT_bedKd 305.4 // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. @@ -685,7 +693,7 @@ // Make delta curves from many straight lines (linear interpolation). // This is a trade-off between visible corners (not enough segments) // and processor overload (too many expensive sqrt calls). - #define DELTA_SEGMENTS_PER_SECOND 200 + #define DELTA_SEGMENTS_PER_SECOND 160 // After homing move down to a height where XY movement is unconstrained //#define DELTA_HOME_TO_SAFE_ZONE @@ -714,15 +722,15 @@ #define DELTA_PRINTABLE_RADIUS 140.0 // (mm) // Center-to-center distance of the holes in the diagonal push rods. - #define DELTA_DIAGONAL_ROD 250.0 // (mm) + #define DELTA_DIAGONAL_ROD 319.5 // (mm) // Distance between bed and nozzle Z home position - #define DELTA_HEIGHT 250.00 // (mm) Get this value from G33 auto calibrate + #define DELTA_HEIGHT 380.00 // (mm) Get this value from G33 auto calibrate #define DELTA_ENDSTOP_ADJ { 0.0, 0.0, 0.0 } // Get these values from G33 auto calibrate // Horizontal distance bridged by diagonal push rods when effector is centered. - #define DELTA_RADIUS 124.0 // (mm) Get this value from G33 auto calibrate + #define DELTA_RADIUS 174.1 // (mm) Get this value from G33 auto calibrate // Trim adjustments for individual towers // tower angle corrections for X and Y tower / rotate XYZ so Z tower angle = 0 @@ -752,15 +760,15 @@ #define USE_ZMAX_PLUG // Enable pullup for all endstops to prevent a floating state -#define ENDSTOPPULLUPS +//#define ENDSTOPPULLUPS #if DISABLED(ENDSTOPPULLUPS) // Disable ENDSTOPPULLUPS to set pullups individually - //#define ENDSTOPPULLUP_XMAX - //#define ENDSTOPPULLUP_YMAX - //#define ENDSTOPPULLUP_ZMAX + #define ENDSTOPPULLUP_XMAX + #define ENDSTOPPULLUP_YMAX + #define ENDSTOPPULLUP_ZMAX //#define ENDSTOPPULLUP_XMIN //#define ENDSTOPPULLUP_YMIN - //#define ENDSTOPPULLUP_ZMIN + #define ENDSTOPPULLUP_ZMIN //#define ENDSTOPPULLUP_ZMIN_PROBE #endif @@ -778,13 +786,13 @@ #endif // Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define X_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Y_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Z_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Z_MIN_PROBE_ENDSTOP_INVERTING true // Set to true to invert the logic of the probe. +#define X_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. +#define Y_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. +#define Z_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. +#define X_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. +#define Y_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. +#define Z_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. +#define Z_MIN_PROBE_ENDSTOP_INVERTING false // Set to true to invert the logic of the probe. /** * Stepper Drivers @@ -847,7 +855,6 @@ //============================================================================= // @section motion -// delta speeds must be the same on xyz /** * Default Settings * @@ -872,18 +879,18 @@ #define XYZ_FULL_STEPS_PER_ROTATION 200 #define XYZ_MICROSTEPS 16 #define XYZ_BELT_PITCH 2 -#define XYZ_PULLEY_TEETH 20 +#define XYZ_PULLEY_TEETH 16 // delta speeds must be the same on xyz #define DEFAULT_XYZ_STEPS_PER_UNIT ((XYZ_FULL_STEPS_PER_ROTATION) * (XYZ_MICROSTEPS) / double(XYZ_BELT_PITCH) / double(XYZ_PULLEY_TEETH)) -#define DEFAULT_AXIS_STEPS_PER_UNIT { DEFAULT_XYZ_STEPS_PER_UNIT, DEFAULT_XYZ_STEPS_PER_UNIT, DEFAULT_XYZ_STEPS_PER_UNIT, 760*1.1 } // default steps per unit for Kossel (GT2, 20 tooth) +#define DEFAULT_AXIS_STEPS_PER_UNIT { DEFAULT_XYZ_STEPS_PER_UNIT, DEFAULT_XYZ_STEPS_PER_UNIT, DEFAULT_XYZ_STEPS_PER_UNIT, 158 } // default steps per unit for PowerWasp /** * Default Max Feed Rate (mm/s) * Override with M203 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_FEEDRATE { 500, 500, 500, 25 } +#define DEFAULT_MAX_FEEDRATE { 200, 200, 200, 25 } //#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 #if ENABLED(LIMITED_MAX_FR_EDITING) @@ -911,7 +918,7 @@ * M204 R Retract Acceleration * M204 T Travel Acceleration */ -#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves +#define DEFAULT_ACCELERATION 2000 // X, Y, Z and E acceleration for printing moves #define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts #define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves @@ -937,7 +944,7 @@ #endif #endif -#define DEFAULT_EJERK 5.0 // May be used by Linear Advance +#define DEFAULT_EJERK 20.0 // May be used by Linear Advance /** * Junction Deviation Factor @@ -947,7 +954,7 @@ * https://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html */ #if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.013 // (mm) Distance from real junction edge + #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge #define JD_HANDLE_SMALL_SEGMENTS // Use curvature estimation instead of just the junction angle // for small segments (< 1mm) with large junction angles (> 135°). #endif @@ -1016,7 +1023,7 @@ * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. * (e.g., an inductive probe or a nozzle-based probe-switch.) */ -//#define FIX_MOUNTED_PROBE +#define FIX_MOUNTED_PROBE /** * Use the nozzle as the probe, as with a conductive @@ -1154,17 +1161,17 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 0, -10, -3.5 } +#define NOZZLE_TO_PROBE_OFFSET { 0.0, 0.0, 0.3 } // Most probes should stay away from the edges of the bed, but // with NOZZLE_AS_PROBE this can be negative for a wider probing area. #define PROBING_MARGIN 10 // X and Y axis travel speed (mm/min) between probes -#define XY_PROBE_FEEDRATE (66*60) +#define XY_PROBE_FEEDRATE (133*60) // Feedrate (mm/min) for the first approach when double-probing (MULTIPLE_PROBING == 2) -#define Z_PROBE_FEEDRATE_FAST (200*60) +#define Z_PROBE_FEEDRATE_FAST (60*60) // Feedrate (mm/min) for the "accurate" probe of each point #define Z_PROBE_FEEDRATE_SLOW (Z_PROBE_FEEDRATE_FAST / 2) @@ -1222,10 +1229,10 @@ * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. */ -#define Z_CLEARANCE_DEPLOY_PROBE 15 // Z Clearance for Deploy/Stow -#define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points +#define Z_CLEARANCE_DEPLOY_PROBE 20 // Z Clearance for Deploy/Stow +#define Z_CLEARANCE_BETWEEN_PROBES 10 // Z Clearance between probe points #define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes -//#define Z_AFTER_PROBING 5 // Z position after probing is done +//#define Z_AFTER_PROBING 10 // Z position after probing is done #define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping @@ -1296,7 +1303,7 @@ // @section extruder // For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR false +#define INVERT_E0_DIR true #define INVERT_E1_DIR false #define INVERT_E2_DIR false #define INVERT_E3_DIR false @@ -1352,7 +1359,7 @@ */ // Min software endstops constrain movement within minimum coordinate bounds -#define MIN_SOFTWARE_ENDSTOPS +//#define MIN_SOFTWARE_ENDSTOPS #if ENABLED(MIN_SOFTWARE_ENDSTOPS) #define MIN_SOFTWARE_ENDSTOP_X #define MIN_SOFTWARE_ENDSTOP_Y @@ -1554,7 +1561,7 @@ // Set the number of grid points per dimension. // Works best with 5 or more points in each dimension. - #define GRID_MAX_POINTS_X 9 + #define GRID_MAX_POINTS_X 5 #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X // Probe along the Y axis, advancing X after each column @@ -1695,7 +1702,7 @@ #endif // Delta only homes to Z -#define HOMING_FEEDRATE_MM_M { (200*60), (200*60), (200*60) } +#define HOMING_FEEDRATE_MM_M { (60*60), (60*60), (60*60) } // Validate that endstops are triggered on homing moves #define VALIDATE_HOMING_ENDSTOPS @@ -1772,7 +1779,7 @@ * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) */ -//#define EEPROM_SETTINGS // Persistent storage with M500 and M501 +#define EEPROM_SETTINGS // Persistent storage with M500 and M501 //#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. #define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load @@ -2137,7 +2144,7 @@ // // Note: Usually sold with a white PCB. // -//#define REPRAP_DISCOUNT_SMART_CONTROLLER +#define REPRAP_DISCOUNT_SMART_CONTROLLER // // GT2560 (YHCB2004) LCD Display diff --git a/config/examples/delta/kossel_xl/Configuration_adv.h b/config/examples/delta/kossel_xl/Configuration_adv.h index aa6bbae7e4..a87583f8b2 100644 --- a/config/examples/delta/kossel_xl/Configuration_adv.h +++ b/config/examples/delta/kossel_xl/Configuration_adv.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "delta/kossel_xl" + /** * Configuration_adv.h * @@ -736,9 +738,9 @@ //#define SENSORLESS_BACKOFF_MM { 2, 2 } // (mm) Backoff from endstops before sensorless homing -#define HOMING_BUMP_MM { 5, 5, 5 } // (mm) Backoff from endstops after first bump +#define HOMING_BUMP_MM { 2, 2, 2 } // (mm) Backoff from endstops after first bump // For delta all values must be the same -#define HOMING_BUMP_DIVISOR { 10, 10, 10 } // Re-Bump Speed Divisor (Divides the Homing Feedrate) +#define HOMING_BUMP_DIVISOR { 2, 2, 4 } // Re-Bump Speed Divisor (Divides the Homing Feedrate) //#define HOMING_BACKOFF_POST_MM { 2, 2, 2 } // (mm) Backoff from endstops after homing @@ -926,7 +928,7 @@ * Set DISABLE_INACTIVE_? 'true' to shut down axis steppers after an idle period. * The Deactive Time can be overridden with M18 and M84. Set to 0 for No Timeout. */ -#define DEFAULT_STEPPER_DEACTIVE_TIME 60 +#define DEFAULT_STEPPER_DEACTIVE_TIME 120 #define DISABLE_INACTIVE_X true #define DISABLE_INACTIVE_Y true #define DISABLE_INACTIVE_Z true // Set 'false' if the nozzle could fall onto your printed part! @@ -3564,12 +3566,12 @@ #define MAIN_MENU_ITEM_2_GCODE "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND) //#define MAIN_MENU_ITEM_2_CONFIRM - //#define MAIN_MENU_ITEM_3_DESC "Preheat for " PREHEAT_2_LABEL - //#define MAIN_MENU_ITEM_3_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) + #define MAIN_MENU_ITEM_3_DESC "Preheat for " PREHEAT_2_LABEL + #define MAIN_MENU_ITEM_3_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) //#define MAIN_MENU_ITEM_3_CONFIRM - //#define MAIN_MENU_ITEM_4_DESC "Heat Bed/Home/Level" - //#define MAIN_MENU_ITEM_4_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29" + #define MAIN_MENU_ITEM_4_DESC "Heat Bed/Home/Level" + #define MAIN_MENU_ITEM_4_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29" //#define MAIN_MENU_ITEM_4_CONFIRM //#define MAIN_MENU_ITEM_5_DESC "Home & Info" diff --git a/config/examples/gCreate/gMax1.5+/Configuration.h b/config/examples/gCreate/gMax1.5+/Configuration.h index 78c2dc9160..3abe14380e 100644 --- a/config/examples/gCreate/gMax1.5+/Configuration.h +++ b/config/examples/gCreate/gMax1.5+/Configuration.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "gCreate/gMax1.5+" + /** * Configuration.h * @@ -87,7 +89,7 @@ #define SHOW_BOOTSCREEN // Show the bitmap in Marlin/_Bootscreen.h on startup. -//#define SHOW_CUSTOM_BOOTSCREEN +#define SHOW_CUSTOM_BOOTSCREEN // Show the bitmap in Marlin/_Statusscreen.h on the status screen. //#define CUSTOM_STATUS_SCREEN_IMAGE @@ -134,11 +136,15 @@ // Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_RAMPS_14_EFB + //#define MOTHERBOARD BOARD_RAMPS_14_EEF + #define MOTHERBOARD BOARD_RAMPS_14_EFB // gMax users please note: This is a Roxy modification. I print on glass and + // use Marlin to control the bed temperature. So, if you have a single nozzle + // machine, this will work fine for you. Just set the TEMP_SENSOR_BED to 0 down + // below so Marlin doesn't mess with the bed temp. #endif // Name displayed in the LCD "Ready" message and Info menu -//#define CUSTOM_MACHINE_NAME "3D Printer" +#define CUSTOM_MACHINE_NAME "gMax" // Printer's unique ID, used by some programs to differentiate between machines. // Choose your own or use a service like https://www.uuidgenerator.net/version4 @@ -416,7 +422,7 @@ * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. */ -#define TEMP_SENSOR_0 1 +#define TEMP_SENSOR_0 5 #define TEMP_SENSOR_1 0 #define TEMP_SENSOR_2 0 #define TEMP_SENSOR_3 0 @@ -424,8 +430,10 @@ #define TEMP_SENSOR_5 0 #define TEMP_SENSOR_6 0 #define TEMP_SENSOR_7 0 -#define TEMP_SENSOR_BED 0 -#define TEMP_SENSOR_PROBE 0 +#define TEMP_SENSOR_BED 75 // gMax-1.5+ users please note: This is a Roxy modification to the printer. I want + // to print on glass. And I'm using a 400mm x 400mm silicon heat pad powered through + // a Fortek SSR to do it. If you are using an unaltered gCreate machine, this needs + // to be set to 0 #define TEMP_SENSOR_CHAMBER 0 #define TEMP_SENSOR_COOLER 0 @@ -444,9 +452,9 @@ //#define TEMP_SENSOR_1_AS_REDUNDANT #define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10 -#define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 -#define TEMP_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target +#define TEMP_RESIDENCY_TIME 16 // (seconds) Time to wait for hotend to "settle" in M109 +#define TEMP_WINDOW 5 // (°C) Temperature proximity for the "temperature reached" timer +#define TEMP_HYSTERESIS 12 // (°C) Temperature proximity considered "close enough" to the target #define TEMP_BED_RESIDENCY_TIME 10 // (seconds) Time to wait for bed to "settle" in M190 #define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer @@ -472,15 +480,15 @@ // Above this temperature the heater will be switched off. // This can protect components from overheating, but NOT from shorts and failures. // (Use MINTEMP for thermistor short/failure protection.) -#define HEATER_0_MAXTEMP 275 -#define HEATER_1_MAXTEMP 275 -#define HEATER_2_MAXTEMP 275 -#define HEATER_3_MAXTEMP 275 -#define HEATER_4_MAXTEMP 275 -#define HEATER_5_MAXTEMP 275 -#define HEATER_6_MAXTEMP 275 -#define HEATER_7_MAXTEMP 275 -#define BED_MAXTEMP 150 +#define HEATER_0_MAXTEMP 245 +#define HEATER_1_MAXTEMP 245 +#define HEATER_2_MAXTEMP 245 +#define HEATER_3_MAXTEMP 245 +#define HEATER_4_MAXTEMP 245 +#define HEATER_5_MAXTEMP 245 +#define HEATER_6_MAXTEMP 245 +#define HEATER_7_MAXTEMP 245 +#define BED_MAXTEMP 115 #define CHAMBER_MAXTEMP 60 /** @@ -510,16 +518,17 @@ //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) // Set/get with gcode: M301 E[extruder number, 0-2] + // gMax J-Head #if ENABLED(PID_PARAMS_PER_HOTEND) // Specify between 1 and HOTENDS values per array. // If fewer than EXTRUDER values are provided, the last element will be repeated. - #define DEFAULT_Kp_LIST { 22.20, 22.20 } - #define DEFAULT_Ki_LIST { 1.08, 1.08 } - #define DEFAULT_Kd_LIST { 114.00, 114.00 } + #define DEFAULT_Kp_LIST { 15.35, 15.35 } + #define DEFAULT_Ki_LIST { 0.85, 0.85 } + #define DEFAULT_Kd_LIST { 69.45, 69.45 } #else - #define DEFAULT_Kp 22.20 - #define DEFAULT_Ki 1.08 - #define DEFAULT_Kd 114.00 + #define DEFAULT_Kp 15.35 + #define DEFAULT_Ki 0.85 + #define DEFAULT_Kd 69.45 #endif #endif // PIDTEMP @@ -540,7 +549,7 @@ * heater. If your configuration is significantly different than this and you don't understand * the issues involved, don't use bed PID until someone else verifies that your hardware works. */ -//#define PIDTEMPBED +#define PIDTEMPBED //#define BED_LIMIT_SWITCHING @@ -558,9 +567,9 @@ // 120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) // from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) - #define DEFAULT_bedKp 10.00 - #define DEFAULT_bedKi .023 - #define DEFAULT_bedKd 305.4 + #define DEFAULT_bedKp 135.44 + #define DEFAULT_bedKi 24.60 + #define DEFAULT_bedKd 186.40 // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. #endif // PIDTEMPBED @@ -684,14 +693,14 @@ // Almost all printers will be using one per axis. Probes will use one or more of the // extra connectors. Leave undefined any used for non-endstop and non-probe purposes. #define USE_XMIN_PLUG -#define USE_YMIN_PLUG +//#define USE_YMIN_PLUG #define USE_ZMIN_PLUG //#define USE_XMAX_PLUG -//#define USE_YMAX_PLUG +#define USE_YMAX_PLUG //#define USE_ZMAX_PLUG // Enable pullup for all endstops to prevent a floating state -#define ENDSTOPPULLUPS +//#define ENDSTOPPULLUPS #if DISABLED(ENDSTOPPULLUPS) // Disable ENDSTOPPULLUPS to set pullups individually //#define ENDSTOPPULLUP_XMAX @@ -717,11 +726,11 @@ #endif // Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. +#define X_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Y_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. #define Z_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. #define X_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. +#define Y_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. #define Z_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. #define Z_MIN_PROBE_ENDSTOP_INVERTING false // Set to true to invert the logic of the probe. @@ -806,14 +815,14 @@ * Override with M92 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 500 } +#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 96 } /** * Default Max Feed Rate (mm/s) * Override with M203 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 } +#define DEFAULT_MAX_FEEDRATE { 500, 500, 25, 25 } //#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 #if ENABLED(LIMITED_MAX_FR_EDITING) @@ -826,7 +835,7 @@ * Override with M201 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 } +#define DEFAULT_MAX_ACCELERATION { 800, 800, 700, 10000 } //#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 #if ENABLED(LIMITED_MAX_ACCEL_EDITING) @@ -841,9 +850,9 @@ * M204 R Retract Acceleration * M204 T Travel Acceleration */ -#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves +#define DEFAULT_ACCELERATION 500 // X, Y, Z and E acceleration for printing moves +#define DEFAULT_RETRACT_ACCELERATION 400 // E acceleration for retracts +#define DEFAULT_TRAVEL_ACCELERATION 400 // X, Y, Z acceleration for travel (non printing) moves /** * Default Jerk limits (mm/s) @@ -855,9 +864,9 @@ */ //#define CLASSIC_JERK #if ENABLED(CLASSIC_JERK) - #define DEFAULT_XJERK 10.0 - #define DEFAULT_YJERK 10.0 - #define DEFAULT_ZJERK 0.3 + #define DEFAULT_XJERK 8.5 + #define DEFAULT_YJERK 8.5 + #define DEFAULT_ZJERK 0.7 //#define TRAVEL_EXTRA_XYJERK 0.0 // Additional jerk allowance for all travel moves @@ -867,7 +876,7 @@ #endif #endif -#define DEFAULT_EJERK 5.0 // May be used by Linear Advance +#define DEFAULT_EJERK 4.0 // May be used by Linear Advance /** * Junction Deviation Factor @@ -877,7 +886,7 @@ * https://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html */ #if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.013 // (mm) Distance from real junction edge + #define JUNCTION_DEVIATION_MM 0.058 // (mm) Distance from real junction edge #define JD_HANDLE_SMALL_SEGMENTS // Use curvature estimation instead of just the junction angle // for small segments (< 1mm) with large junction angles (> 135°). #endif @@ -963,7 +972,7 @@ /** * The BLTouch probe uses a Hall effect sensor and emulates a servo. */ -//#define BLTOUCH +#define BLTOUCH /** * Touch-MI Probe by hotends.fr @@ -1055,17 +1064,17 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +#define NOZZLE_TO_PROBE_OFFSET { -17, -10, -0.25 } // Most probes should stay away from the edges of the bed, but // with NOZZLE_AS_PROBE this can be negative for a wider probing area. -#define PROBING_MARGIN 10 +#define PROBING_MARGIN 45 // X and Y axis travel speed (mm/min) between probes -#define XY_PROBE_FEEDRATE (133*60) +#define XY_PROBE_FEEDRATE (125*60) // Feedrate (mm/min) for the first approach when double-probing (MULTIPLE_PROBING == 2) -#define Z_PROBE_FEEDRATE_FAST (4*60) +#define Z_PROBE_FEEDRATE_FAST (14*60) // Feedrate (mm/min) for the "accurate" probe of each point #define Z_PROBE_FEEDRATE_SLOW (Z_PROBE_FEEDRATE_FAST / 2) @@ -1123,10 +1132,10 @@ * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. */ -#define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow -#define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points +#define Z_CLEARANCE_DEPLOY_PROBE 15 // Z Clearance for Deploy/Stow +#define Z_CLEARANCE_BETWEEN_PROBES 6 // Z Clearance between probe points #define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes -//#define Z_AFTER_PROBING 5 // Z position after probing is done +//#define Z_AFTER_PROBING 6 // Z position after probing is done #define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping @@ -1135,7 +1144,7 @@ #define Z_PROBE_OFFSET_RANGE_MAX 20 // Enable the M48 repeatability test to test probe accuracy -//#define Z_MIN_PROBE_REPEATABILITY_TEST +#define Z_MIN_PROBE_REPEATABILITY_TEST // Before deploy/stow pause for user confirmation //#define PAUSE_BEFORE_DEPLOY_STOW @@ -1190,9 +1199,9 @@ // @section machine // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR false +#define INVERT_X_DIR true #define INVERT_Y_DIR true -#define INVERT_Z_DIR false +#define INVERT_Z_DIR true // @section extruder @@ -1218,7 +1227,7 @@ */ //#define Z_IDLE_HEIGHT Z_HOME_POS -//#define Z_HOMING_HEIGHT 4 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ... +#define Z_HOMING_HEIGHT 10 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ... // Be sure to have this much clearance over your Z_MAX_POS to prevent grinding. //#define Z_AFTER_HOMING 10 // (mm) Height to move to after homing Z @@ -1226,14 +1235,15 @@ // Direction of endstops when homing; 1=MAX, -1=MIN // :[-1,1] #define X_HOME_DIR -1 -#define Y_HOME_DIR -1 +#define Y_HOME_DIR 1 #define Z_HOME_DIR -1 // @section machine // The size of the printable area -#define X_BED_SIZE 200 -#define Y_BED_SIZE 200 +#define X_BED_SIZE 420 // These numbers are not accurate for an unaltered gMax 1.5+ printer. My print bed +#define Y_BED_SIZE 420 // is inset a noticable amount from the edge of the bed. Combined with the inset, + // the nozzle can reach all cordinates of the mesh. // Travel limits (mm) after homing, corresponding to endstop positions. #define X_MIN_POS 0 @@ -1241,7 +1251,7 @@ #define Z_MIN_POS 0 #define X_MAX_POS X_BED_SIZE #define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 200 +#define Z_MAX_POS 500 /** * Software Endstops @@ -1253,7 +1263,7 @@ */ // Min software endstops constrain movement within minimum coordinate bounds -#define MIN_SOFTWARE_ENDSTOPS +//#define MIN_SOFTWARE_ENDSTOPS #if ENABLED(MIN_SOFTWARE_ENDSTOPS) #define MIN_SOFTWARE_ENDSTOP_X #define MIN_SOFTWARE_ENDSTOP_Y @@ -1285,7 +1295,7 @@ * RAMPS-based boards use SERVO3_PIN for the first runout sensor. * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. */ -//#define FILAMENT_RUNOUT_SENSOR +#define FILAMENT_RUNOUT_SENSOR #if ENABLED(FILAMENT_RUNOUT_SENSOR) #define FIL_RUNOUT_ENABLED_DEFAULT true // Enable the sensor on startup. Override with M412 followed by M500. #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. @@ -1388,7 +1398,7 @@ //#define AUTO_BED_LEVELING_3POINT //#define AUTO_BED_LEVELING_LINEAR //#define AUTO_BED_LEVELING_BILINEAR -//#define AUTO_BED_LEVELING_UBL +#define AUTO_BED_LEVELING_UBL //#define MESH_BED_LEVELING /** @@ -1396,7 +1406,7 @@ * these options to restore the prior leveling state or to always enable * leveling immediately after G28. */ -//#define RESTORE_LEVELING_AFTER_G28 +#define RESTORE_LEVELING_AFTER_G28 //#define ENABLE_LEVELING_AFTER_G28 /** @@ -1413,7 +1423,7 @@ * Turn on with the command 'M111 S32'. * NOTE: Requires a lot of PROGMEM! */ -//#define DEBUG_LEVELING_FEATURE +#define DEBUG_LEVELING_FEATURE #if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL, PROBE_MANUALLY) // Set a height for the start of manual adjustment @@ -1438,10 +1448,10 @@ /** * Enable the G26 Mesh Validation Pattern tool. */ - //#define G26_MESH_VALIDATION + #define G26_MESH_VALIDATION #if ENABLED(G26_MESH_VALIDATION) - #define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle. - #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for G26. + #define MESH_TEST_NOZZLE_SIZE 0.5 // (mm) Diameter of primary nozzle. + #define MESH_TEST_LAYER_HEIGHT 0.3 // (mm) Default layer height for G26. #define MESH_TEST_HOTEND_TEMP 205 // (°C) Default nozzle temperature for G26. #define MESH_TEST_BED_TEMP 60 // (°C) Default bed temperature for G26. #define G26_XY_FEEDRATE 20 // (mm/s) Feedrate for G26 XY moves. @@ -1484,9 +1494,9 @@ //========================= Unified Bed Leveling ============================ //=========================================================================== - //#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh + #define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh - #define MESH_INSET 1 // Set Mesh bounds as an inset region of the bed + #define MESH_INSET 45 // Set Mesh bounds as an inset region of the bed #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X @@ -1587,15 +1597,15 @@ // - Move the Z probe (or nozzle) to a defined XY point before Z Homing. // - Prevent Z homing when the Z probe is outside bed area. // -//#define Z_SAFE_HOMING +#define Z_SAFE_HOMING #if ENABLED(Z_SAFE_HOMING) - #define Z_SAFE_HOMING_X_POINT X_CENTER // X point for Z homing - #define Z_SAFE_HOMING_Y_POINT Y_CENTER // Y point for Z homing + #define Z_SAFE_HOMING_X_POINT ((X_BED_SIZE) / 2 - 8) // X point for Z homing + #define Z_SAFE_HOMING_Y_POINT ((Y_BED_SIZE) / 2 - 4) // Y point for Z homing #endif // Homing speeds (mm/min) -#define HOMING_FEEDRATE_MM_M { (50*60), (50*60), (4*60) } +#define HOMING_FEEDRATE_MM_M { (60*60), (60*60), (14*60) } // Validate that endstops are triggered on homing moves #define VALIDATE_HOMING_ENDSTOPS @@ -1672,7 +1682,7 @@ * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) */ -//#define EEPROM_SETTINGS // Persistent storage with M500 and M501 +#define EEPROM_SETTINGS // Persistent storage with M500 and M501 //#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. #define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load @@ -1686,7 +1696,7 @@ // When enabled Marlin will send a busy status message to the host // every couple of seconds when it can't accept commands. // -#define HOST_KEEPALIVE_FEATURE // Disable this if your host doesn't like keepalive messages +//#define HOST_KEEPALIVE_FEATURE // Disable this if your host doesn't like keepalive messages #define DEFAULT_KEEPALIVE_INTERVAL 2 // Number of seconds between "busy" messages. Set with M113. #define BUSY_WHILE_HEATING // Some hosts require "busy" messages even during heating @@ -1706,7 +1716,7 @@ // Preheat Constants - Up to 5 are supported without changes // #define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 180 +#define PREHEAT_1_TEMP_HOTEND 200 #define PREHEAT_1_TEMP_BED 70 #define PREHEAT_1_TEMP_CHAMBER 35 #define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 @@ -1728,7 +1738,7 @@ * P1 Raise the nozzle always to Z-park height. * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. */ -//#define NOZZLE_PARK_FEATURE +#define NOZZLE_PARK_FEATURE #if ENABLED(NOZZLE_PARK_FEATURE) // Specify a park position as { X, Y, Z_raise } @@ -1936,14 +1946,14 @@ * SD Card support is disabled by default. If your controller has an SD slot, * you must uncomment the following option or it won't work. */ -//#define SDSUPPORT +#define SDSUPPORT /** * SD CARD: ENABLE CRC * * Use CRC checks and retries on the SD communication. */ -//#define SD_CHECK_AND_RETRY +#define SD_CHECK_AND_RETRY /** * LCD Menu Items @@ -1960,13 +1970,13 @@ // This option overrides the default number of encoder pulses needed to // produce one step. Should be increased for high-resolution encoders. // -//#define ENCODER_PULSES_PER_STEP 4 +#define ENCODER_PULSES_PER_STEP 1 // // Use this option to override the number of step signals required to // move between next/prev menu items. // -//#define ENCODER_STEPS_PER_MENU_ITEM 1 +#define ENCODER_STEPS_PER_MENU_ITEM 5 /** * Encoder Direction Options @@ -2195,7 +2205,7 @@ // RepRapDiscount FULL GRAPHIC Smart Controller // https://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller // -//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER +#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER // // K.3D Full Graphic Smart Controller @@ -2731,12 +2741,12 @@ * Set this manually if there are extra servos needing manual control. * Set to 0 to turn off servo support. */ -//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command +#define NUM_SERVOS 2 // Servo index starts with 0 for M280 command // (ms) Delay before the next move will start, to give the servo time to reach its target angle. // 300ms is a good value but you can try less delay. // If the servo can't reach the requested position, increase it. -#define SERVO_DELAY { 300 } +#define SERVO_DELAY { 300, 300 } // Only power servos during movement, otherwise leave off to prevent jitter //#define DEACTIVATE_SERVOS_AFTER_MOVE diff --git a/config/examples/gCreate/gMax1.5+/Configuration_adv.h b/config/examples/gCreate/gMax1.5+/Configuration_adv.h index 5335fa012a..e72f3228f3 100644 --- a/config/examples/gCreate/gMax1.5+/Configuration_adv.h +++ b/config/examples/gCreate/gMax1.5+/Configuration_adv.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "gCreate/gMax1.5+" + /** * Configuration_adv.h * @@ -238,8 +240,8 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + #define THERMAL_PROTECTION_PERIOD 50 // Seconds + #define THERMAL_PROTECTION_HYSTERESIS 3 // Degrees Celsius //#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops #if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP) @@ -258,7 +260,7 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 20 // Seconds + #define WATCH_TEMP_PERIOD 50 // Seconds #define WATCH_TEMP_INCREASE 2 // Degrees Celsius #endif @@ -266,7 +268,7 @@ * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_BED_PERIOD 50 // Seconds #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius /** @@ -867,7 +869,7 @@ // On a 300mm bed a 5% grade would give a misalignment of ~1.5cm #define G34_MAX_GRADE 5 // (%) Maximum incline that G34 will handle - #define Z_STEPPER_ALIGN_ITERATIONS 5 // Number of iterations to apply during alignment + #define Z_STEPPER_ALIGN_ITERATIONS 3 // Number of iterations to apply during alignment #define Z_STEPPER_ALIGN_ACC 0.02 // Stop iterating early if the accuracy is better than this #define RESTORE_LEVELING_AFTER_G34 // Restore leveling after G34 is done? // After G34, re-home Z (G28 Z) or just calculate it from the last probe heights? @@ -925,7 +927,7 @@ * Set DISABLE_INACTIVE_? 'true' to shut down axis steppers after an idle period. * The Deactive Time can be overridden with M18 and M84. Set to 0 for No Timeout. */ -#define DEFAULT_STEPPER_DEACTIVE_TIME 120 +#define DEFAULT_STEPPER_DEACTIVE_TIME 0 // usually set to 120 seconds #define DISABLE_INACTIVE_X true #define DISABLE_INACTIVE_Y true #define DISABLE_INACTIVE_Z true // Set 'false' if the nozzle could fall onto your printed part! @@ -1301,7 +1303,7 @@ //#define BROWSE_MEDIA_ON_INSERT // Open the file browser when media is inserted - #define EVENT_GCODE_SD_ABORT "G28XY" // G-code to run on SD Abort Print (e.g., "G28XY" or "G27") + #define EVENT_GCODE_SD_ABORT "G27" // G-code to run on SD Abort Print (e.g., "G28XY" or "G27") #if ENABLED(PRINTER_EVENT_LEDS) #define PE_LEDS_COMPLETED_TIME (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination @@ -1401,7 +1403,7 @@ * On print completion the LCD Menu will open with the file selected. * You can just click to start the print, or navigate elsewhere. */ - //#define SD_REPRINT_LAST_SELECTED_FILE + #define SD_REPRINT_LAST_SELECTED_FILE /** * Auto-report SdCard status with M27 S @@ -1790,7 +1792,7 @@ * * Warning: Does not respect endstops! */ -//#define BABYSTEPPING +#define BABYSTEPPING #if ENABLED(BABYSTEPPING) //#define INTEGRATED_BABYSTEPPING // EXPERIMENTAL integration of babystepping into the Stepper ISR //#define BABYSTEP_WITHOUT_HOMING @@ -1798,10 +1800,10 @@ //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way //#define BABYSTEP_MILLIMETER_UNITS // Specify BABYSTEP_MULTIPLICATOR_(XY|Z) in mm instead of micro-steps - #define BABYSTEP_MULTIPLICATOR_Z 1 // (steps or mm) Steps or millimeter distance for each Z babystep - #define BABYSTEP_MULTIPLICATOR_XY 1 // (steps or mm) Steps or millimeter distance for each XY babystep + #define BABYSTEP_MULTIPLICATOR_Z 3 // (steps or mm) Steps or millimeter distance for each Z babystep + #define BABYSTEP_MULTIPLICATOR_XY 3 // (steps or mm) Steps or millimeter distance for each XY babystep - //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. + #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. // Note: Extra time may be added to mitigate controller latency. @@ -1852,12 +1854,12 @@ * Override if the automatically selected points are inadequate. */ #if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL) - //#define PROBE_PT_1_X 15 - //#define PROBE_PT_1_Y 180 - //#define PROBE_PT_2_X 15 - //#define PROBE_PT_2_Y 20 - //#define PROBE_PT_3_X 170 - //#define PROBE_PT_3_Y 20 + #define PROBE_PT_1_X 53 + #define PROBE_PT_1_Y 323 + #define PROBE_PT_2_X 53 + #define PROBE_PT_2_Y 63 + #define PROBE_PT_3_X 348 + #define PROBE_PT_3_Y 211 #endif /** @@ -2100,7 +2102,7 @@ // For debug-echo: 128 bytes for the optimal speed. // Other output doesn't need to be that speedy. // :[0, 2, 4, 8, 16, 32, 64, 128, 256] -#define TX_BUFFER_SIZE 0 +#define TX_BUFFER_SIZE 32 // Host Receive Buffer Size // Without XON/XOFF flow control (see SERIAL_XON_XOFF below) 32 bytes should be enough. @@ -2311,7 +2313,7 @@ * * Enable PARK_HEAD_ON_PAUSE to add the G-code M125 Pause and Park. */ -//#define ADVANCED_PAUSE_FEATURE +#define ADVANCED_PAUSE_FEATURE #if ENABLED(ADVANCED_PAUSE_FEATURE) #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. @@ -2349,7 +2351,7 @@ #define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed. #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change. - //#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. + #define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. //#define HOME_BEFORE_FILAMENT_CHANGE // If needed, home before parking for filament change //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. @@ -3471,7 +3473,7 @@ * - M206 and M428 are disabled. * - G92 will revert to its behavior from Marlin 1.0. */ -//#define NO_WORKSPACE_OFFSETS +#define NO_WORKSPACE_OFFSETS // Extra options for the M114 "Current Position" report //#define M114_DETAIL // Use 'M114` for details to check planner calculations @@ -3487,7 +3489,7 @@ * For clients that use a fixed-width font (like OctoPrint), leave this set to 1.0. * Otherwise, adjust according to your client and font. */ -#define PROPORTIONAL_FONT_RATIO 1.0 +#define PROPORTIONAL_FONT_RATIO 1.5 /** * Spend 28 bytes of SRAM to optimize the G-code parser @@ -3562,12 +3564,12 @@ #define MAIN_MENU_ITEM_2_GCODE "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND) //#define MAIN_MENU_ITEM_2_CONFIRM - //#define MAIN_MENU_ITEM_3_DESC "Preheat for " PREHEAT_2_LABEL - //#define MAIN_MENU_ITEM_3_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) + #define MAIN_MENU_ITEM_3_DESC "Preheat for " PREHEAT_2_LABEL + #define MAIN_MENU_ITEM_3_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) //#define MAIN_MENU_ITEM_3_CONFIRM - //#define MAIN_MENU_ITEM_4_DESC "Heat Bed/Home/Level" - //#define MAIN_MENU_ITEM_4_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29" + #define MAIN_MENU_ITEM_4_DESC "Heat Bed/Home/Level" + #define MAIN_MENU_ITEM_4_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29" //#define MAIN_MENU_ITEM_4_CONFIRM //#define MAIN_MENU_ITEM_5_DESC "Home & Info" diff --git a/config/examples/makibox/Configuration.h b/config/examples/makibox/Configuration.h index 78c2dc9160..bd720fc435 100644 --- a/config/examples/makibox/Configuration.h +++ b/config/examples/makibox/Configuration.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "makibox" + /** * Configuration.h * @@ -134,11 +136,11 @@ // Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_RAMPS_14_EFB + #define MOTHERBOARD BOARD_5DPRINT #endif // Name displayed in the LCD "Ready" message and Info menu -//#define CUSTOM_MACHINE_NAME "3D Printer" +#define CUSTOM_MACHINE_NAME "MakiBox" // Printer's unique ID, used by some programs to differentiate between machines. // Choose your own or use a service like https://www.uuidgenerator.net/version4 @@ -424,7 +426,7 @@ #define TEMP_SENSOR_5 0 #define TEMP_SENSOR_6 0 #define TEMP_SENSOR_7 0 -#define TEMP_SENSOR_BED 0 +#define TEMP_SENSOR_BED 12 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 #define TEMP_SENSOR_COOLER 0 @@ -448,7 +450,7 @@ #define TEMP_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer #define TEMP_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target -#define TEMP_BED_RESIDENCY_TIME 10 // (seconds) Time to wait for bed to "settle" in M190 +#define TEMP_BED_RESIDENCY_TIME 0 // (seconds) Time to wait for bed to "settle" in M190 #define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer #define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target @@ -550,7 +552,10 @@ * When set to any value below 255, enables a form of PWM to the bed that acts like a divider * so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED) */ -#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current +#define MAX_BED_POWER 175 // limits duty cycle to bed; 255=full current +// This limit is set to 175 by default in the Makibox configuration and it can be adjusted +// to increase the heatup rate. However, if changed, be aware of the safety concerns of +// drawing too much current from the power supply. #if ENABLED(PIDTEMPBED) //#define MIN_BED_POWER 0 @@ -720,9 +725,9 @@ #define X_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. #define Y_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. #define Z_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define X_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. +#define X_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Y_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Z_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. #define Z_MIN_PROBE_ENDSTOP_INVERTING false // Set to true to invert the logic of the probe. /** @@ -806,14 +811,14 @@ * Override with M92 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 500 } +#define DEFAULT_AXIS_STEPS_PER_UNIT { 400, 400, 400, 163 } // default steps per unit for ***** MakiBox A6 ***** /** * Default Max Feed Rate (mm/s) * Override with M203 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 } +#define DEFAULT_MAX_FEEDRATE { 60, 60, 20, 45 } //#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 #if ENABLED(LIMITED_MAX_FR_EDITING) @@ -826,7 +831,7 @@ * Override with M201 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 } +#define DEFAULT_MAX_ACCELERATION { 2000, 2000, 30, 10000 } //#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 #if ENABLED(LIMITED_MAX_ACCEL_EDITING) @@ -963,7 +968,7 @@ /** * The BLTouch probe uses a Hall effect sensor and emulates a servo. */ -//#define BLTOUCH +#define BLTOUCH /** * Touch-MI Probe by hotends.fr @@ -1055,7 +1060,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +#define NOZZLE_TO_PROBE_OFFSET { -25, -29, -12.35 } // Most probes should stay away from the edges of the bed, but // with NOZZLE_AS_PROBE this can be negative for a wider probing area. @@ -1065,7 +1070,7 @@ #define XY_PROBE_FEEDRATE (133*60) // Feedrate (mm/min) for the first approach when double-probing (MULTIPLE_PROBING == 2) -#define Z_PROBE_FEEDRATE_FAST (4*60) +#define Z_PROBE_FEEDRATE_FAST (2*60) // Feedrate (mm/min) for the "accurate" probe of each point #define Z_PROBE_FEEDRATE_SLOW (Z_PROBE_FEEDRATE_FAST / 2) @@ -1123,7 +1128,7 @@ * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. */ -#define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow +#define Z_CLEARANCE_DEPLOY_PROBE 15 // Z Clearance for Deploy/Stow #define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points #define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes //#define Z_AFTER_PROBING 5 // Z position after probing is done @@ -1191,13 +1196,13 @@ // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR false -#define INVERT_Y_DIR true +#define INVERT_Y_DIR false #define INVERT_Z_DIR false // @section extruder // For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR false +#define INVERT_E0_DIR true #define INVERT_E1_DIR false #define INVERT_E2_DIR false #define INVERT_E3_DIR false @@ -1232,8 +1237,8 @@ // @section machine // The size of the printable area -#define X_BED_SIZE 200 -#define Y_BED_SIZE 200 +#define X_BED_SIZE 110 +#define Y_BED_SIZE 150 // Travel limits (mm) after homing, corresponding to endstop positions. #define X_MIN_POS 0 @@ -1241,7 +1246,7 @@ #define Z_MIN_POS 0 #define X_MAX_POS X_BED_SIZE #define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 200 +#define Z_MAX_POS 86 /** * Software Endstops @@ -1587,7 +1592,7 @@ // - Move the Z probe (or nozzle) to a defined XY point before Z Homing. // - Prevent Z homing when the Z probe is outside bed area. // -//#define Z_SAFE_HOMING +#define Z_SAFE_HOMING #if ENABLED(Z_SAFE_HOMING) #define Z_SAFE_HOMING_X_POINT X_CENTER // X point for Z homing @@ -1595,7 +1600,7 @@ #endif // Homing speeds (mm/min) -#define HOMING_FEEDRATE_MM_M { (50*60), (50*60), (4*60) } +#define HOMING_FEEDRATE_MM_M { 1500, 1500, (2*60) } // Validate that endstops are triggered on homing moves #define VALIDATE_HOMING_ENDSTOPS @@ -1672,7 +1677,7 @@ * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) */ -//#define EEPROM_SETTINGS // Persistent storage with M500 and M501 +#define EEPROM_SETTINGS // Persistent storage with M500 and M501 //#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. #define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load @@ -1709,13 +1714,13 @@ #define PREHEAT_1_TEMP_HOTEND 180 #define PREHEAT_1_TEMP_BED 70 #define PREHEAT_1_TEMP_CHAMBER 35 -#define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 +#define PREHEAT_1_FAN_SPEED 255 // Value from 0 to 255 #define PREHEAT_2_LABEL "ABS" #define PREHEAT_2_TEMP_HOTEND 240 -#define PREHEAT_2_TEMP_BED 110 +#define PREHEAT_2_TEMP_BED 100 #define PREHEAT_2_TEMP_CHAMBER 35 -#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 +#define PREHEAT_2_FAN_SPEED 255 // Value from 0 to 255 /** * Nozzle Park @@ -1936,7 +1941,7 @@ * SD Card support is disabled by default. If your controller has an SD slot, * you must uncomment the following option or it won't work. */ -//#define SDSUPPORT +#define SDSUPPORT /** * SD CARD: ENABLE CRC diff --git a/config/examples/makibox/Configuration_adv.h b/config/examples/makibox/Configuration_adv.h index 5335fa012a..b6d5a64563 100644 --- a/config/examples/makibox/Configuration_adv.h +++ b/config/examples/makibox/Configuration_adv.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "makibox" + /** * Configuration_adv.h * @@ -867,7 +869,7 @@ // On a 300mm bed a 5% grade would give a misalignment of ~1.5cm #define G34_MAX_GRADE 5 // (%) Maximum incline that G34 will handle - #define Z_STEPPER_ALIGN_ITERATIONS 5 // Number of iterations to apply during alignment + #define Z_STEPPER_ALIGN_ITERATIONS 3 // Number of iterations to apply during alignment #define Z_STEPPER_ALIGN_ACC 0.02 // Stop iterating early if the accuracy is better than this #define RESTORE_LEVELING_AFTER_G34 // Restore leveling after G34 is done? // After G34, re-home Z (G28 Z) or just calculate it from the last probe heights? @@ -925,7 +927,7 @@ * Set DISABLE_INACTIVE_? 'true' to shut down axis steppers after an idle period. * The Deactive Time can be overridden with M18 and M84. Set to 0 for No Timeout. */ -#define DEFAULT_STEPPER_DEACTIVE_TIME 120 +#define DEFAULT_STEPPER_DEACTIVE_TIME 60 #define DISABLE_INACTIVE_X true #define DISABLE_INACTIVE_Y true #define DISABLE_INACTIVE_Z true // Set 'false' if the nozzle could fall onto your printed part! @@ -1105,11 +1107,11 @@ //#define DIGIPOT_MCP4018 // Requires https://github.com/felias-fogg/SlowSoftI2CMaster //#define DIGIPOT_MCP4451 #if EITHER(DIGIPOT_MCP4018, DIGIPOT_MCP4451) - #define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT:4 AZTEEG_X3_PRO:8 MKS_SBASE:5 MIGHTYBOARD_REVE:5 + #define DIGIPOT_I2C_NUM_CHANNELS 4 // 5DPRINT:4 AZTEEG_X3_PRO:8 MKS_SBASE:5 MIGHTYBOARD_REVE:5 // Actual motor currents in Amps. The number of entries must match DIGIPOT_I2C_NUM_CHANNELS. // These correspond to the physical drivers, so be mindful if the order is changed. - #define DIGIPOT_I2C_MOTOR_CURRENTS { 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0 } // AZTEEG_X3_PRO + #define DIGIPOT_I2C_MOTOR_CURRENTS { 1.7, 1.7, 1.7, 1.7 } // 5DPRINT //#define DIGIPOT_USE_RAW_VALUES // Use DIGIPOT_MOTOR_CURRENT raw wiper values (instead of A4988 motor currents) @@ -1274,11 +1276,11 @@ * * :['SPI_HALF_SPEED', 'SPI_QUARTER_SPEED', 'SPI_EIGHTH_SPEED'] */ - //#define SD_SPI_SPEED SPI_HALF_SPEED + #define SD_SPI_SPEED SPI_HALF_SPEED // The standard SD detect circuit reads LOW when media is inserted and HIGH when empty. // Enable this option and set to HIGH if your SD cards are incorrectly detected. - //#define SD_DETECT_STATE HIGH + #define SD_DETECT_STATE LOW //#define SD_IGNORE_AT_STARTUP // Don't mount the SD card when starting up //#define SDCARD_READONLY // Read-only SD card (to save over 2K of flash) @@ -3562,12 +3564,12 @@ #define MAIN_MENU_ITEM_2_GCODE "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND) //#define MAIN_MENU_ITEM_2_CONFIRM - //#define MAIN_MENU_ITEM_3_DESC "Preheat for " PREHEAT_2_LABEL - //#define MAIN_MENU_ITEM_3_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) + #define MAIN_MENU_ITEM_3_DESC "Preheat for " PREHEAT_2_LABEL + #define MAIN_MENU_ITEM_3_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) //#define MAIN_MENU_ITEM_3_CONFIRM - //#define MAIN_MENU_ITEM_4_DESC "Heat Bed/Home/Level" - //#define MAIN_MENU_ITEM_4_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29" + #define MAIN_MENU_ITEM_4_DESC "Heat Bed/Home/Level" + #define MAIN_MENU_ITEM_4_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29" //#define MAIN_MENU_ITEM_4_CONFIRM //#define MAIN_MENU_ITEM_5_DESC "Home & Info" diff --git a/config/examples/tvrrug/Round2/Configuration.h b/config/examples/tvrrug/Round2/Configuration.h index 78c2dc9160..5bd7b62617 100644 --- a/config/examples/tvrrug/Round2/Configuration.h +++ b/config/examples/tvrrug/Round2/Configuration.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "tvrrug/Round2" + /** * Configuration.h * @@ -134,7 +136,7 @@ // Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_RAMPS_14_EFB + #define MOTHERBOARD BOARD_OMCA #endif // Name displayed in the LCD "Ready" message and Info menu @@ -151,7 +153,7 @@ #define EXTRUDERS 1 // Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc. -#define DEFAULT_NOMINAL_FILAMENT_DIA 1.75 +#define DEFAULT_NOMINAL_FILAMENT_DIA 3.0 // For Cyclops or any "multi-extruder" that shares a single nozzle. //#define SINGLENOZZLE @@ -416,7 +418,7 @@ * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. */ -#define TEMP_SENSOR_0 1 +#define TEMP_SENSOR_0 5 #define TEMP_SENSOR_1 0 #define TEMP_SENSOR_2 0 #define TEMP_SENSOR_3 0 @@ -424,7 +426,7 @@ #define TEMP_SENSOR_5 0 #define TEMP_SENSOR_6 0 #define TEMP_SENSOR_7 0 -#define TEMP_SENSOR_BED 0 +#define TEMP_SENSOR_BED 5 #define TEMP_SENSOR_PROBE 0 #define TEMP_SENSOR_CHAMBER 0 #define TEMP_SENSOR_COOLER 0 @@ -448,7 +450,7 @@ #define TEMP_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer #define TEMP_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target -#define TEMP_BED_RESIDENCY_TIME 10 // (seconds) Time to wait for bed to "settle" in M190 +#define TEMP_BED_RESIDENCY_TIME 0 // (seconds) Time to wait for bed to "settle" in M190 #define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer #define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target @@ -510,16 +512,17 @@ //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) // Set/get with gcode: M301 E[extruder number, 0-2] + // J-Head Mk V-B #if ENABLED(PID_PARAMS_PER_HOTEND) // Specify between 1 and HOTENDS values per array. // If fewer than EXTRUDER values are provided, the last element will be repeated. - #define DEFAULT_Kp_LIST { 22.20, 22.20 } - #define DEFAULT_Ki_LIST { 1.08, 1.08 } - #define DEFAULT_Kd_LIST { 114.00, 114.00 } + #define DEFAULT_Kp_LIST { 25.05, 25.05 } + #define DEFAULT_Ki_LIST { 2.30, 2.30 } + #define DEFAULT_Kd_LIST { 68.15, 68.15 } #else - #define DEFAULT_Kp 22.20 - #define DEFAULT_Ki 1.08 - #define DEFAULT_Kd 114.00 + #define DEFAULT_Kp 25.05 + #define DEFAULT_Ki 2.30 + #define DEFAULT_Kd 68.15 #endif #endif // PIDTEMP @@ -717,13 +720,13 @@ #endif // Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define X_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_PROBE_ENDSTOP_INVERTING false // Set to true to invert the logic of the probe. +#define X_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Y_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Z_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define X_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Y_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Z_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. +#define Z_MIN_PROBE_ENDSTOP_INVERTING true // Set to true to invert the logic of the probe. /** * Stepper Drivers @@ -806,14 +809,18 @@ * Override with M92 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 500 } +#define DEFAULT_AXIS_STEPS_PER_UNIT { 71.1, 71.1, 2560, 600 } // David TVRR + +//#define DEFAULT_AXIS_STEPS_PER_UNIT { 79.87, 79.87, 2566, 563.78 } // Al's TVRR +//#define DEFAULT_AXIS_STEPS_PER_UNIT { 81.26, 80.01, 2561, 599.14 } // Michel TVRR old +//#define DEFAULT_AXIS_STEPS_PER_UNIT { 71.1, 71.1, 2560, 739.65 } // Michel TVRR /** * Default Max Feed Rate (mm/s) * Override with M203 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 } +#define DEFAULT_MAX_FEEDRATE { 500, 500, 5, 45 } // David TVRR //#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 #if ENABLED(LIMITED_MAX_FR_EDITING) @@ -826,7 +833,9 @@ * Override with M201 * X, Y, Z, E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 } +#define DEFAULT_MAX_ACCELERATION { 9000, 9000, 100, 10000 } + +/* MICHEL: This has an impact on the "ripples" in print walls */ //#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 #if ENABLED(LIMITED_MAX_ACCEL_EDITING) @@ -841,9 +850,9 @@ * M204 R Retract Acceleration * M204 T Travel Acceleration */ -#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves +#define DEFAULT_ACCELERATION 500 // X, Y, Z and E acceleration for printing moves +#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts +#define DEFAULT_TRAVEL_ACCELERATION 500 // X, Y, Z acceleration for travel (non printing) moves /** * Default Jerk limits (mm/s) @@ -877,7 +886,7 @@ * https://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html */ #if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.013 // (mm) Distance from real junction edge + #define JUNCTION_DEVIATION_MM 0.08 // (mm) Distance from real junction edge #define JD_HANDLE_SMALL_SEGMENTS // Use curvature estimation instead of just the junction angle // for small segments (< 1mm) with large junction angles (> 135°). #endif @@ -1055,7 +1064,7 @@ * | [-] | * O-- FRONT --+ */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } +#define NOZZLE_TO_PROBE_OFFSET { -25, -29, -12.35 } // Most probes should stay away from the edges of the bed, but // with NOZZLE_AS_PROBE this can be negative for a wider probing area. @@ -1123,7 +1132,7 @@ * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. */ -#define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow +#define Z_CLEARANCE_DEPLOY_PROBE 15 // Z Clearance for Deploy/Stow #define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points #define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes //#define Z_AFTER_PROBING 5 // Z position after probing is done @@ -1168,10 +1177,10 @@ // For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1 // :{ 0:'Low', 1:'High' } -#define X_ENABLE_ON 0 -#define Y_ENABLE_ON 0 -#define Z_ENABLE_ON 0 -#define E_ENABLE_ON 0 // For all extruders +#define X_ENABLE_ON 1 +#define Y_ENABLE_ON 1 +#define Z_ENABLE_ON 1 +#define E_ENABLE_ON 1 // For all extruders // Disable axis steppers immediately when they're not being stepped. // WARNING: When motors turn off there is a chance of losing position accuracy! @@ -1191,8 +1200,8 @@ // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR false -#define INVERT_Y_DIR true -#define INVERT_Z_DIR false +#define INVERT_Y_DIR false +#define INVERT_Z_DIR true // @section extruder @@ -1232,8 +1241,8 @@ // @section machine // The size of the printable area -#define X_BED_SIZE 200 -#define Y_BED_SIZE 200 +#define X_BED_SIZE 205 +#define Y_BED_SIZE 205 // Travel limits (mm) after homing, corresponding to endstop positions. #define X_MIN_POS 0 @@ -1241,7 +1250,7 @@ #define Z_MIN_POS 0 #define X_MAX_POS X_BED_SIZE #define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 200 +#define Z_MAX_POS 120 /** * Software Endstops @@ -1709,13 +1718,13 @@ #define PREHEAT_1_TEMP_HOTEND 180 #define PREHEAT_1_TEMP_BED 70 #define PREHEAT_1_TEMP_CHAMBER 35 -#define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 +#define PREHEAT_1_FAN_SPEED 255 // Value from 0 to 255 #define PREHEAT_2_LABEL "ABS" #define PREHEAT_2_TEMP_HOTEND 240 -#define PREHEAT_2_TEMP_BED 110 +#define PREHEAT_2_TEMP_BED 100 #define PREHEAT_2_TEMP_CHAMBER 35 -#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 +#define PREHEAT_2_FAN_SPEED 255 // Value from 0 to 255 /** * Nozzle Park diff --git a/config/examples/tvrrug/Round2/Configuration_adv.h b/config/examples/tvrrug/Round2/Configuration_adv.h index 5335fa012a..43b2c6bd08 100644 --- a/config/examples/tvrrug/Round2/Configuration_adv.h +++ b/config/examples/tvrrug/Round2/Configuration_adv.h @@ -21,6 +21,8 @@ */ #pragma once +#define CONFIG_EXAMPLES_DIR "tvrrug/Round2" + /** * Configuration_adv.h * @@ -461,9 +463,9 @@ * The fan turns on automatically whenever any driver is enabled and turns * off (or reduces to idle speed) shortly after drivers are turned off. */ -//#define USE_CONTROLLER_FAN +#define USE_CONTROLLER_FAN #if ENABLED(USE_CONTROLLER_FAN) - //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan + #define CONTROLLER_FAN_PIN 23 // Set a custom pin for the controller fan //#define CONTROLLER_FAN_USE_Z_ONLY // With this option only the Z axis is considered //#define CONTROLLER_FAN_IGNORE_Z // Ignore Z stepper. Useful when stepper timeout is disabled. #define CONTROLLERFAN_SPEED_MIN 0 // (0-255) Minimum speed. (If set below this value the fan is turned off.) @@ -736,7 +738,7 @@ //#define SENSORLESS_BACKOFF_MM { 2, 2 } // (mm) Backoff from endstops before sensorless homing -#define HOMING_BUMP_MM { 5, 5, 2 } // (mm) Backoff from endstops after first bump +#define HOMING_BUMP_MM { 5, 5, 1 } // (mm) Backoff from endstops after first bump #define HOMING_BUMP_DIVISOR { 2, 2, 4 } // Re-Bump Speed Divisor (Divides the Homing Feedrate) //#define HOMING_BACKOFF_POST_MM { 2, 2, 2 } // (mm) Backoff from endstops after homing @@ -867,7 +869,7 @@ // On a 300mm bed a 5% grade would give a misalignment of ~1.5cm #define G34_MAX_GRADE 5 // (%) Maximum incline that G34 will handle - #define Z_STEPPER_ALIGN_ITERATIONS 5 // Number of iterations to apply during alignment + #define Z_STEPPER_ALIGN_ITERATIONS 3 // Number of iterations to apply during alignment #define Z_STEPPER_ALIGN_ACC 0.02 // Stop iterating early if the accuracy is better than this #define RESTORE_LEVELING_AFTER_G34 // Restore leveling after G34 is done? // After G34, re-home Z (G28 Z) or just calculate it from the last probe heights? @@ -925,7 +927,7 @@ * Set DISABLE_INACTIVE_? 'true' to shut down axis steppers after an idle period. * The Deactive Time can be overridden with M18 and M84. Set to 0 for No Timeout. */ -#define DEFAULT_STEPPER_DEACTIVE_TIME 120 +#define DEFAULT_STEPPER_DEACTIVE_TIME 60 #define DISABLE_INACTIVE_X true #define DISABLE_INACTIVE_Y true #define DISABLE_INACTIVE_Z true // Set 'false' if the nozzle could fall onto your printed part! @@ -1301,7 +1303,7 @@ //#define BROWSE_MEDIA_ON_INSERT // Open the file browser when media is inserted - #define EVENT_GCODE_SD_ABORT "G28XY" // G-code to run on SD Abort Print (e.g., "G28XY" or "G27") + #define EVENT_GCODE_SD_ABORT "G27" // G-code to run on SD Abort Print (e.g., "G28XY" or "G27") #if ENABLED(PRINTER_EVENT_LEDS) #define PE_LEDS_COMPLETED_TIME (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination @@ -3562,12 +3564,12 @@ #define MAIN_MENU_ITEM_2_GCODE "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND) //#define MAIN_MENU_ITEM_2_CONFIRM - //#define MAIN_MENU_ITEM_3_DESC "Preheat for " PREHEAT_2_LABEL - //#define MAIN_MENU_ITEM_3_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) + #define MAIN_MENU_ITEM_3_DESC "Preheat for " PREHEAT_2_LABEL + #define MAIN_MENU_ITEM_3_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) //#define MAIN_MENU_ITEM_3_CONFIRM - //#define MAIN_MENU_ITEM_4_DESC "Heat Bed/Home/Level" - //#define MAIN_MENU_ITEM_4_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29" + #define MAIN_MENU_ITEM_4_DESC "Heat Bed/Home/Level" + #define MAIN_MENU_ITEM_4_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29" //#define MAIN_MENU_ITEM_4_CONFIRM //#define MAIN_MENU_ITEM_5_DESC "Home & Info"