diff --git a/config/default/Configuration.h b/config/default/Configuration.h index ef6f4b1f11..0f0e80f9d7 100644 --- a/config/default/Configuration.h +++ b/config/default/Configuration.h @@ -2376,6 +2376,11 @@ //#define VIKI2 //#define miniVIKI +// +// Alfawise Ex8 printer LCD marked as WYH L12864 COG +// +//#define WYH_L12864 + // // MakerLab Mini Panel with graphic // controller and SD support - https://reprap.org/wiki/Mini_panel diff --git a/config/default/Configuration_adv.h b/config/default/Configuration_adv.h index 63b768cfea..4a9eabfac2 100644 --- a/config/default/Configuration_adv.h +++ b/config/default/Configuration_adv.h @@ -1603,7 +1603,7 @@ * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. * This will prevent position updates from being displayed. */ - #if ENABLED(U8GLIB_ST7920) + #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. //#define DOGM_SPI_DELAY_US 5 diff --git a/config/examples/3DFabXYZ/Migbot/Configuration.h b/config/examples/3DFabXYZ/Migbot/Configuration.h index d1a3a01bcf..67717417a0 100644 --- a/config/examples/3DFabXYZ/Migbot/Configuration.h +++ b/config/examples/3DFabXYZ/Migbot/Configuration.h @@ -2408,6 +2408,11 @@ //#define VIKI2 //#define miniVIKI +// +// Alfawise Ex8 printer LCD marked as WYH L12864 COG +// +//#define WYH_L12864 + // // MakerLab Mini Panel with graphic // controller and SD support - https://reprap.org/wiki/Mini_panel diff --git a/config/examples/3DFabXYZ/Migbot/Configuration_adv.h b/config/examples/3DFabXYZ/Migbot/Configuration_adv.h index 31dc4785b4..fe3f467578 100644 --- a/config/examples/3DFabXYZ/Migbot/Configuration_adv.h +++ b/config/examples/3DFabXYZ/Migbot/Configuration_adv.h @@ -1603,7 +1603,7 @@ * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. * This will prevent position updates from being displayed. */ - #if ENABLED(U8GLIB_ST7920) + #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. //#define DOGM_SPI_DELAY_US 5 diff --git a/config/examples/ADIMLab/Gantry v1/Configuration.h b/config/examples/ADIMLab/Gantry v1/Configuration.h index b5b516fd45..a9a7305f4d 100644 --- a/config/examples/ADIMLab/Gantry v1/Configuration.h +++ b/config/examples/ADIMLab/Gantry v1/Configuration.h @@ -2377,6 +2377,11 @@ //#define VIKI2 //#define miniVIKI +// +// Alfawise Ex8 printer LCD marked as WYH L12864 COG +// +//#define WYH_L12864 + // // MakerLab Mini Panel with graphic // controller and SD support - https://reprap.org/wiki/Mini_panel diff --git a/config/examples/ADIMLab/Gantry v1/Configuration_adv.h b/config/examples/ADIMLab/Gantry v1/Configuration_adv.h index 3d4c39b34e..4caa692c05 100644 --- a/config/examples/ADIMLab/Gantry v1/Configuration_adv.h +++ b/config/examples/ADIMLab/Gantry v1/Configuration_adv.h @@ -1603,7 +1603,7 @@ * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. * This will prevent position updates from being displayed. */ - #if ENABLED(U8GLIB_ST7920) + #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. //#define DOGM_SPI_DELAY_US 5 diff --git a/config/examples/ADIMLab/Gantry v2/Configuration.h b/config/examples/ADIMLab/Gantry v2/Configuration.h index 9776e153d3..256717c885 100644 --- a/config/examples/ADIMLab/Gantry v2/Configuration.h +++ b/config/examples/ADIMLab/Gantry v2/Configuration.h @@ -2377,6 +2377,11 @@ //#define VIKI2 //#define miniVIKI +// +// Alfawise Ex8 printer LCD marked as WYH L12864 COG +// +//#define WYH_L12864 + // // MakerLab Mini Panel with graphic // controller and SD support - https://reprap.org/wiki/Mini_panel diff --git a/config/examples/ADIMLab/Gantry v2/Configuration_adv.h b/config/examples/ADIMLab/Gantry v2/Configuration_adv.h index e1a720cbfe..e3c6145b38 100644 --- a/config/examples/ADIMLab/Gantry v2/Configuration_adv.h +++ b/config/examples/ADIMLab/Gantry v2/Configuration_adv.h @@ -1603,7 +1603,7 @@ * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. * This will prevent position updates from being displayed. */ - #if ENABLED(U8GLIB_ST7920) + #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. //#define DOGM_SPI_DELAY_US 5 diff --git a/config/examples/Alfawise/U20-bltouch/Configuration.h b/config/examples/Alfawise/U20-bltouch/Configuration.h index 479726e3fe..554f465a8e 100644 --- a/config/examples/Alfawise/U20-bltouch/Configuration.h +++ b/config/examples/Alfawise/U20-bltouch/Configuration.h @@ -2455,6 +2455,11 @@ //#define VIKI2 //#define miniVIKI +// +// Alfawise Ex8 printer LCD marked as WYH L12864 COG +// +//#define WYH_L12864 + // // MakerLab Mini Panel with graphic // controller and SD support - https://reprap.org/wiki/Mini_panel diff --git a/config/examples/Alfawise/U20-bltouch/Configuration_adv.h b/config/examples/Alfawise/U20-bltouch/Configuration_adv.h index 55a101683f..614faf1647 100644 --- a/config/examples/Alfawise/U20-bltouch/Configuration_adv.h +++ b/config/examples/Alfawise/U20-bltouch/Configuration_adv.h @@ -1612,7 +1612,7 @@ * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. * This will prevent position updates from being displayed. */ - #if ENABLED(U8GLIB_ST7920) + #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. //#define DOGM_SPI_DELAY_US 5 diff --git a/config/examples/Alfawise/U20/Configuration.h b/config/examples/Alfawise/U20/Configuration.h index fa799bdfce..61c3a0aa70 100644 --- a/config/examples/Alfawise/U20/Configuration.h +++ b/config/examples/Alfawise/U20/Configuration.h @@ -2456,6 +2456,11 @@ //#define VIKI2 //#define miniVIKI +// +// Alfawise Ex8 printer LCD marked as WYH L12864 COG +// +//#define WYH_L12864 + // // MakerLab Mini Panel with graphic // controller and SD support - https://reprap.org/wiki/Mini_panel diff --git a/config/examples/Alfawise/U20/Configuration_adv.h b/config/examples/Alfawise/U20/Configuration_adv.h index 836a8f6834..012a13b141 100644 --- a/config/examples/Alfawise/U20/Configuration_adv.h +++ b/config/examples/Alfawise/U20/Configuration_adv.h @@ -1603,7 +1603,7 @@ * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. * This will prevent position updates from being displayed. */ - #if ENABLED(U8GLIB_ST7920) + #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. //#define DOGM_SPI_DELAY_US 5 diff --git a/config/examples/AliExpress/CL-260/Configuration.h b/config/examples/AliExpress/CL-260/Configuration.h index f82d360ee0..d4412818cf 100644 --- a/config/examples/AliExpress/CL-260/Configuration.h +++ b/config/examples/AliExpress/CL-260/Configuration.h @@ -2376,6 +2376,11 @@ //#define VIKI2 //#define miniVIKI +// +// Alfawise Ex8 printer LCD marked as WYH L12864 COG +// +//#define WYH_L12864 + // // MakerLab Mini Panel with graphic // controller and SD support - https://reprap.org/wiki/Mini_panel diff --git a/config/examples/AliExpress/UM2pExt/Configuration.h b/config/examples/AliExpress/UM2pExt/Configuration.h index 3072bb1e54..e0a80eda16 100644 --- a/config/examples/AliExpress/UM2pExt/Configuration.h +++ b/config/examples/AliExpress/UM2pExt/Configuration.h @@ -2377,6 +2377,11 @@ //#define VIKI2 //#define miniVIKI +// +// Alfawise Ex8 printer LCD marked as WYH L12864 COG +// +//#define WYH_L12864 + // // MakerLab Mini Panel with graphic // controller and SD support - https://reprap.org/wiki/Mini_panel diff --git a/config/examples/AliExpress/UM2pExt/Configuration_adv.h b/config/examples/AliExpress/UM2pExt/Configuration_adv.h index b940f0d3d4..5b8da50eae 100644 --- a/config/examples/AliExpress/UM2pExt/Configuration_adv.h +++ b/config/examples/AliExpress/UM2pExt/Configuration_adv.h @@ -1603,7 +1603,7 @@ * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. * This will prevent position updates from being displayed. */ - #if ENABLED(U8GLIB_ST7920) + #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. //#define DOGM_SPI_DELAY_US 5 diff --git a/config/examples/Anet/A2/Configuration.h b/config/examples/Anet/A2/Configuration.h index b6435bab41..530c58c98f 100644 --- a/config/examples/Anet/A2/Configuration.h +++ b/config/examples/Anet/A2/Configuration.h @@ -2378,6 +2378,11 @@ //#define VIKI2 //#define miniVIKI +// +// Alfawise Ex8 printer LCD marked as WYH L12864 COG +// +//#define WYH_L12864 + // // MakerLab Mini Panel with graphic // controller and SD support - https://reprap.org/wiki/Mini_panel diff --git a/config/examples/Anet/A2/Configuration_adv.h b/config/examples/Anet/A2/Configuration_adv.h index d19b88584f..decbeb8c0d 100644 --- a/config/examples/Anet/A2/Configuration_adv.h +++ b/config/examples/Anet/A2/Configuration_adv.h @@ -1603,7 +1603,7 @@ * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. * This will prevent position updates from being displayed. */ - #if ENABLED(U8GLIB_ST7920) + #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. //#define DOGM_SPI_DELAY_US 5 diff --git a/config/examples/Anet/A2plus/Configuration.h b/config/examples/Anet/A2plus/Configuration.h index 30f1e1d4c3..fc8201386a 100644 --- a/config/examples/Anet/A2plus/Configuration.h +++ b/config/examples/Anet/A2plus/Configuration.h @@ -2378,6 +2378,11 @@ //#define VIKI2 //#define miniVIKI +// +// Alfawise Ex8 printer LCD marked as WYH L12864 COG +// +//#define WYH_L12864 + // // MakerLab Mini Panel with graphic // controller and SD support - https://reprap.org/wiki/Mini_panel diff --git a/config/examples/Anet/A2plus/Configuration_adv.h b/config/examples/Anet/A2plus/Configuration_adv.h index d19b88584f..decbeb8c0d 100644 --- a/config/examples/Anet/A2plus/Configuration_adv.h +++ b/config/examples/Anet/A2plus/Configuration_adv.h @@ -1603,7 +1603,7 @@ * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. * This will prevent position updates from being displayed. */ - #if ENABLED(U8GLIB_ST7920) + #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. //#define DOGM_SPI_DELAY_US 5 diff --git a/config/examples/Anet/A6/Configuration.h b/config/examples/Anet/A6/Configuration.h index a7f6e75b36..faaea3e23a 100644 --- a/config/examples/Anet/A6/Configuration.h +++ b/config/examples/Anet/A6/Configuration.h @@ -2470,6 +2470,11 @@ //#define VIKI2 //#define miniVIKI +// +// Alfawise Ex8 printer LCD marked as WYH L12864 COG +// +//#define WYH_L12864 + // // MakerLab Mini Panel with graphic // controller and SD support - https://reprap.org/wiki/Mini_panel diff --git a/config/examples/Anet/A6/Configuration_adv.h b/config/examples/Anet/A6/Configuration_adv.h index 59ac21fb67..ce6cc407d0 100644 --- a/config/examples/Anet/A6/Configuration_adv.h +++ b/config/examples/Anet/A6/Configuration_adv.h @@ -1603,7 +1603,7 @@ * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. * This will prevent position updates from being displayed. */ - #if ENABLED(U8GLIB_ST7920) + #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. //#define DOGM_SPI_DELAY_US 5 diff --git a/config/examples/Anet/A8/Configuration.h b/config/examples/Anet/A8/Configuration.h index 8955c7d4f6..5858e50f92 100644 --- a/config/examples/Anet/A8/Configuration.h +++ b/config/examples/Anet/A8/Configuration.h @@ -2381,6 +2381,11 @@ //#define VIKI2 //#define miniVIKI +// +// Alfawise Ex8 printer LCD marked as WYH L12864 COG +// +//#define WYH_L12864 + // // MakerLab Mini Panel with graphic // controller and SD support - https://reprap.org/wiki/Mini_panel diff --git a/config/examples/Anet/A8/Configuration_adv.h b/config/examples/Anet/A8/Configuration_adv.h index e8afeb6bba..027ac03764 100644 --- a/config/examples/Anet/A8/Configuration_adv.h +++ b/config/examples/Anet/A8/Configuration_adv.h @@ -1603,7 +1603,7 @@ * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. * This will prevent position updates from being displayed. */ - #if ENABLED(U8GLIB_ST7920) + #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. //#define DOGM_SPI_DELAY_US 5 diff --git a/config/examples/Anet/A8plus/Configuration.h b/config/examples/Anet/A8plus/Configuration.h index 92b33e9f5f..e369a56fe3 100644 --- a/config/examples/Anet/A8plus/Configuration.h +++ b/config/examples/Anet/A8plus/Configuration.h @@ -2378,6 +2378,11 @@ //#define VIKI2 //#define miniVIKI +// +// Alfawise Ex8 printer LCD marked as WYH L12864 COG +// +//#define WYH_L12864 + // // MakerLab Mini Panel with graphic // controller and SD support - https://reprap.org/wiki/Mini_panel diff --git a/config/examples/Anet/A8plus/Configuration_adv.h b/config/examples/Anet/A8plus/Configuration_adv.h index 45856e04a8..825191fdde 100644 --- a/config/examples/Anet/A8plus/Configuration_adv.h +++ b/config/examples/Anet/A8plus/Configuration_adv.h @@ -1603,7 +1603,7 @@ * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. * This will prevent position updates from being displayed. */ - #if ENABLED(U8GLIB_ST7920) + #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. //#define DOGM_SPI_DELAY_US 5 diff --git a/config/examples/Anet/A9/Configuration.h b/config/examples/Anet/A9/Configuration.h index 700ed629e9..f7ae2456c3 100644 --- a/config/examples/Anet/A9/Configuration.h +++ b/config/examples/Anet/A9/Configuration.h @@ -2376,6 +2376,11 @@ //#define VIKI2 //#define miniVIKI +// +// Alfawise Ex8 printer LCD marked as WYH L12864 COG +// +//#define WYH_L12864 + // // MakerLab Mini Panel with graphic // controller and SD support - https://reprap.org/wiki/Mini_panel diff --git a/config/examples/Anet/A9/Configuration_adv.h b/config/examples/Anet/A9/Configuration_adv.h index 2bfebe753c..d03ebabfbf 100644 --- a/config/examples/Anet/A9/Configuration_adv.h +++ b/config/examples/Anet/A9/Configuration_adv.h @@ -1603,7 +1603,7 @@ * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. * This will prevent position updates from being displayed. */ - #if ENABLED(U8GLIB_ST7920) + #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. //#define DOGM_SPI_DELAY_US 5 diff --git a/config/examples/Anet/E10/Configuration.h b/config/examples/Anet/E10/Configuration.h index bbdb433b6e..0a6559c37f 100644 --- a/config/examples/Anet/E10/Configuration.h +++ b/config/examples/Anet/E10/Configuration.h @@ -2376,6 +2376,11 @@ //#define VIKI2 //#define miniVIKI +// +// Alfawise Ex8 printer LCD marked as WYH L12864 COG +// +//#define WYH_L12864 + // // MakerLab Mini Panel with graphic // controller and SD support - https://reprap.org/wiki/Mini_panel diff --git a/config/examples/Anet/E10/Configuration_adv.h b/config/examples/Anet/E10/Configuration_adv.h index 0e03c067bc..0d39d43083 100644 --- a/config/examples/Anet/E10/Configuration_adv.h +++ b/config/examples/Anet/E10/Configuration_adv.h @@ -1603,7 +1603,7 @@ * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. * This will prevent position updates from being displayed. */ - #if ENABLED(U8GLIB_ST7920) + #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. //#define DOGM_SPI_DELAY_US 5 diff --git a/config/examples/Anet/E16/BTT SKR 1.3/Configuration.h b/config/examples/Anet/E16/BTT SKR 1.3/Configuration.h index 30fe76088f..d8859f0504 100644 --- a/config/examples/Anet/E16/BTT SKR 1.3/Configuration.h +++ b/config/examples/Anet/E16/BTT SKR 1.3/Configuration.h @@ -2378,6 +2378,11 @@ //#define VIKI2 //#define miniVIKI +// +// Alfawise Ex8 printer LCD marked as WYH L12864 COG +// +//#define WYH_L12864 + // // MakerLab Mini Panel with graphic // controller and SD support - https://reprap.org/wiki/Mini_panel diff --git a/config/examples/Anet/E16/BTT SKR 1.3/Configuration_adv.h b/config/examples/Anet/E16/BTT SKR 1.3/Configuration_adv.h index 7523367ee8..c21ee6761f 100644 --- a/config/examples/Anet/E16/BTT SKR 1.3/Configuration_adv.h +++ b/config/examples/Anet/E16/BTT SKR 1.3/Configuration_adv.h @@ -1603,7 +1603,7 @@ * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. * This will prevent position updates from being displayed. */ - #if ENABLED(U8GLIB_ST7920) + #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. //#define DOGM_SPI_DELAY_US 5 diff --git a/config/examples/Anet/E16/Stock/Configuration.h b/config/examples/Anet/E16/Stock/Configuration.h index fee21b3c16..dd1af06063 100644 --- a/config/examples/Anet/E16/Stock/Configuration.h +++ b/config/examples/Anet/E16/Stock/Configuration.h @@ -2378,6 +2378,11 @@ //#define VIKI2 //#define miniVIKI +// +// Alfawise Ex8 printer LCD marked as WYH L12864 COG +// +//#define WYH_L12864 + // // MakerLab Mini Panel with graphic // controller and SD support - https://reprap.org/wiki/Mini_panel diff --git a/config/examples/Anet/E16/Stock/Configuration_adv.h b/config/examples/Anet/E16/Stock/Configuration_adv.h index d5103fcfab..0fc921ca57 100644 --- a/config/examples/Anet/E16/Stock/Configuration_adv.h +++ b/config/examples/Anet/E16/Stock/Configuration_adv.h @@ -1603,7 +1603,7 @@ * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. * This will prevent position updates from being displayed. */ - #if ENABLED(U8GLIB_ST7920) + #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. //#define DOGM_SPI_DELAY_US 5 diff --git a/config/examples/Anet/ET4+/Configuration.h b/config/examples/Anet/ET4+/Configuration.h index ed207e1c95..bd440badd0 100644 --- a/config/examples/Anet/ET4+/Configuration.h +++ b/config/examples/Anet/ET4+/Configuration.h @@ -2388,6 +2388,11 @@ //#define VIKI2 //#define miniVIKI +// +// Alfawise Ex8 printer LCD marked as WYH L12864 COG +// +//#define WYH_L12864 + // // MakerLab Mini Panel with graphic // controller and SD support - https://reprap.org/wiki/Mini_panel diff --git a/config/examples/Anet/ET4+/Configuration_adv.h b/config/examples/Anet/ET4+/Configuration_adv.h index bd9d2db2ad..8a6fa5ef71 100644 --- a/config/examples/Anet/ET4+/Configuration_adv.h +++ b/config/examples/Anet/ET4+/Configuration_adv.h @@ -1603,7 +1603,7 @@ * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. * This will prevent position updates from being displayed. */ - #if ENABLED(U8GLIB_ST7920) + #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. //#define DOGM_SPI_DELAY_US 5 diff --git a/config/examples/Anet/ET4-Pro/Configuration.h b/config/examples/Anet/ET4-Pro/Configuration.h index 1daff93b8a..19ebeaa08d 100644 --- a/config/examples/Anet/ET4-Pro/Configuration.h +++ b/config/examples/Anet/ET4-Pro/Configuration.h @@ -2388,6 +2388,11 @@ //#define VIKI2 //#define miniVIKI +// +// Alfawise Ex8 printer LCD marked as WYH L12864 COG +// +//#define WYH_L12864 + // // MakerLab Mini Panel with graphic // controller and SD support - https://reprap.org/wiki/Mini_panel diff --git a/config/examples/Anet/ET4-Pro/Configuration_adv.h b/config/examples/Anet/ET4-Pro/Configuration_adv.h index bd9d2db2ad..8a6fa5ef71 100644 --- a/config/examples/Anet/ET4-Pro/Configuration_adv.h +++ b/config/examples/Anet/ET4-Pro/Configuration_adv.h @@ -1603,7 +1603,7 @@ * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. * This will prevent position updates from being displayed. */ - #if ENABLED(U8GLIB_ST7920) + #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. //#define DOGM_SPI_DELAY_US 5 diff --git a/config/examples/Anet/ET4/Configuration.h b/config/examples/Anet/ET4/Configuration.h index d4428e3390..61715c4b99 100644 --- a/config/examples/Anet/ET4/Configuration.h +++ b/config/examples/Anet/ET4/Configuration.h @@ -2388,6 +2388,11 @@ //#define VIKI2 //#define miniVIKI +// +// Alfawise Ex8 printer LCD marked as WYH L12864 COG +// +//#define WYH_L12864 + // // MakerLab Mini Panel with graphic // controller and SD support - https://reprap.org/wiki/Mini_panel diff --git a/config/examples/Anet/ET4/Configuration_adv.h b/config/examples/Anet/ET4/Configuration_adv.h index ed2011a603..cd443833aa 100644 --- a/config/examples/Anet/ET4/Configuration_adv.h +++ b/config/examples/Anet/ET4/Configuration_adv.h @@ -1603,7 +1603,7 @@ * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. * This will prevent position updates from being displayed. */ - #if ENABLED(U8GLIB_ST7920) + #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. //#define DOGM_SPI_DELAY_US 5 diff --git a/config/examples/Anet/ET4X/Configuration.h b/config/examples/Anet/ET4X/Configuration.h index 724ad57e06..84734df332 100644 --- a/config/examples/Anet/ET4X/Configuration.h +++ b/config/examples/Anet/ET4X/Configuration.h @@ -2388,6 +2388,11 @@ //#define VIKI2 //#define miniVIKI +// +// Alfawise Ex8 printer LCD marked as WYH L12864 COG +// +//#define WYH_L12864 + // // MakerLab Mini Panel with graphic // controller and SD support - https://reprap.org/wiki/Mini_panel diff --git a/config/examples/Anet/ET4X/Configuration_adv.h b/config/examples/Anet/ET4X/Configuration_adv.h index ed2011a603..cd443833aa 100644 --- a/config/examples/Anet/ET4X/Configuration_adv.h +++ b/config/examples/Anet/ET4X/Configuration_adv.h @@ -1603,7 +1603,7 @@ * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. * This will prevent position updates from being displayed. */ - #if ENABLED(U8GLIB_ST7920) + #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. //#define DOGM_SPI_DELAY_US 5 diff --git a/config/examples/Anet/ET5-Pro/Configuration.h b/config/examples/Anet/ET5-Pro/Configuration.h index b2b3080a53..6d33f5ebcf 100644 --- a/config/examples/Anet/ET5-Pro/Configuration.h +++ b/config/examples/Anet/ET5-Pro/Configuration.h @@ -2383,6 +2383,11 @@ //#define VIKI2 //#define miniVIKI +// +// Alfawise Ex8 printer LCD marked as WYH L12864 COG +// +//#define WYH_L12864 + // // MakerLab Mini Panel with graphic // controller and SD support - https://reprap.org/wiki/Mini_panel diff --git a/config/examples/Anet/ET5-Pro/Configuration_adv.h b/config/examples/Anet/ET5-Pro/Configuration_adv.h index 4601e2152e..40c0f16a18 100644 --- a/config/examples/Anet/ET5-Pro/Configuration_adv.h +++ b/config/examples/Anet/ET5-Pro/Configuration_adv.h @@ -1603,7 +1603,7 @@ * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. * This will prevent position updates from being displayed. */ - #if ENABLED(U8GLIB_ST7920) + #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. //#define DOGM_SPI_DELAY_US 5 diff --git a/config/examples/Anet/ET5/Configuration.h b/config/examples/Anet/ET5/Configuration.h index fbf56faae4..0d762e81ee 100644 --- a/config/examples/Anet/ET5/Configuration.h +++ b/config/examples/Anet/ET5/Configuration.h @@ -2383,6 +2383,11 @@ //#define VIKI2 //#define miniVIKI +// +// Alfawise Ex8 printer LCD marked as WYH L12864 COG +// +//#define WYH_L12864 + // // MakerLab Mini Panel with graphic // controller and SD support - https://reprap.org/wiki/Mini_panel diff --git a/config/examples/Anet/ET5/Configuration_adv.h b/config/examples/Anet/ET5/Configuration_adv.h index 4601e2152e..40c0f16a18 100644 --- a/config/examples/Anet/ET5/Configuration_adv.h +++ b/config/examples/Anet/ET5/Configuration_adv.h @@ -1603,7 +1603,7 @@ * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. * This will prevent position updates from being displayed. */ - #if ENABLED(U8GLIB_ST7920) + #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. //#define DOGM_SPI_DELAY_US 5 diff --git a/config/examples/Anet/ET5X/Configuration.h b/config/examples/Anet/ET5X/Configuration.h index a8b64e92df..899229d0c1 100644 --- a/config/examples/Anet/ET5X/Configuration.h +++ b/config/examples/Anet/ET5X/Configuration.h @@ -2383,6 +2383,11 @@ //#define VIKI2 //#define miniVIKI +// +// Alfawise Ex8 printer LCD marked as WYH L12864 COG +// +//#define WYH_L12864 + // // MakerLab Mini Panel with graphic // controller and SD support - https://reprap.org/wiki/Mini_panel diff --git a/config/examples/Anet/ET5X/Configuration_adv.h b/config/examples/Anet/ET5X/Configuration_adv.h index 4601e2152e..40c0f16a18 100644 --- a/config/examples/Anet/ET5X/Configuration_adv.h +++ b/config/examples/Anet/ET5X/Configuration_adv.h @@ -1603,7 +1603,7 @@ * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. * This will prevent position updates from being displayed. */ - #if ENABLED(U8GLIB_ST7920) + #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. //#define DOGM_SPI_DELAY_US 5 diff --git a/config/examples/AnyCubic/Chiron/Configuration.h b/config/examples/AnyCubic/Chiron/Configuration.h index ebeac1d883..61d093341a 100644 --- a/config/examples/AnyCubic/Chiron/Configuration.h +++ b/config/examples/AnyCubic/Chiron/Configuration.h @@ -2379,6 +2379,11 @@ //#define VIKI2 //#define miniVIKI +// +// Alfawise Ex8 printer LCD marked as WYH L12864 COG +// +//#define WYH_L12864 + // // MakerLab Mini Panel with graphic // controller and SD support - https://reprap.org/wiki/Mini_panel diff --git a/config/examples/AnyCubic/Chiron/Configuration_adv.h b/config/examples/AnyCubic/Chiron/Configuration_adv.h index af9747dc02..205925d963 100644 --- a/config/examples/AnyCubic/Chiron/Configuration_adv.h +++ b/config/examples/AnyCubic/Chiron/Configuration_adv.h @@ -1603,7 +1603,7 @@ * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. * This will prevent position updates from being displayed. */ - #if ENABLED(U8GLIB_ST7920) + #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. //#define DOGM_SPI_DELAY_US 5 diff --git a/config/examples/AnyCubic/Mega Zero 2.0/Anycubic V1/Configuration.h b/config/examples/AnyCubic/Mega Zero 2.0/Anycubic V1/Configuration.h index 1fd99f4994..75a3b1b5f0 100644 --- a/config/examples/AnyCubic/Mega Zero 2.0/Anycubic V1/Configuration.h +++ b/config/examples/AnyCubic/Mega Zero 2.0/Anycubic V1/Configuration.h @@ -2378,6 +2378,11 @@ //#define VIKI2 //#define miniVIKI +// +// Alfawise Ex8 printer LCD marked as WYH L12864 COG +// +//#define WYH_L12864 + // // MakerLab Mini Panel with graphic // controller and SD support - https://reprap.org/wiki/Mini_panel diff --git a/config/examples/AnyCubic/Mega Zero 2.0/Anycubic V1/Configuration_adv.h b/config/examples/AnyCubic/Mega Zero 2.0/Anycubic V1/Configuration_adv.h index 7bdaf54503..544cbfac81 100644 --- a/config/examples/AnyCubic/Mega Zero 2.0/Anycubic V1/Configuration_adv.h +++ b/config/examples/AnyCubic/Mega Zero 2.0/Anycubic V1/Configuration_adv.h @@ -1603,7 +1603,7 @@ * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. * This will prevent position updates from being displayed. */ - #if ENABLED(U8GLIB_ST7920) + #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. //#define DOGM_SPI_DELAY_US 5 diff --git a/config/examples/AnyCubic/Mega Zero/Anycubic V1/Configuration.h b/config/examples/AnyCubic/Mega Zero/Anycubic V1/Configuration.h index 1f53ad15b6..f0974780b7 100644 --- a/config/examples/AnyCubic/Mega Zero/Anycubic V1/Configuration.h +++ b/config/examples/AnyCubic/Mega Zero/Anycubic V1/Configuration.h @@ -2378,6 +2378,11 @@ //#define VIKI2 //#define miniVIKI +// +// Alfawise Ex8 printer LCD marked as WYH L12864 COG +// +//#define WYH_L12864 + // // MakerLab Mini Panel with graphic // controller and SD support - https://reprap.org/wiki/Mini_panel diff --git a/config/examples/AnyCubic/Mega Zero/Anycubic V1/Configuration_adv.h b/config/examples/AnyCubic/Mega Zero/Anycubic V1/Configuration_adv.h index 95a9726dd6..2b36471480 100644 --- a/config/examples/AnyCubic/Mega Zero/Anycubic V1/Configuration_adv.h +++ b/config/examples/AnyCubic/Mega Zero/Anycubic V1/Configuration_adv.h @@ -1603,7 +1603,7 @@ * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. * This will prevent position updates from being displayed. */ - #if ENABLED(U8GLIB_ST7920) + #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. //#define DOGM_SPI_DELAY_US 5 diff --git a/config/examples/AnyCubic/Mega Zero/BigTreeTech SKR Mini MZ V1.0/Configuration.h b/config/examples/AnyCubic/Mega Zero/BigTreeTech SKR Mini MZ V1.0/Configuration.h index 713b1d9b10..51a52f86a9 100644 --- a/config/examples/AnyCubic/Mega Zero/BigTreeTech SKR Mini MZ V1.0/Configuration.h +++ b/config/examples/AnyCubic/Mega Zero/BigTreeTech SKR Mini MZ V1.0/Configuration.h @@ -2376,6 +2376,11 @@ //#define VIKI2 //#define miniVIKI +// +// Alfawise Ex8 printer LCD marked as WYH L12864 COG +// +//#define WYH_L12864 + // // MakerLab Mini Panel with graphic // controller and SD support - https://reprap.org/wiki/Mini_panel diff --git a/config/examples/AnyCubic/Mega Zero/BigTreeTech SKR Mini MZ V1.0/Configuration_adv.h b/config/examples/AnyCubic/Mega Zero/BigTreeTech SKR Mini MZ V1.0/Configuration_adv.h index 34604f6dcc..1f8de1bc50 100644 --- a/config/examples/AnyCubic/Mega Zero/BigTreeTech SKR Mini MZ V1.0/Configuration_adv.h +++ b/config/examples/AnyCubic/Mega Zero/BigTreeTech SKR Mini MZ V1.0/Configuration_adv.h @@ -1603,7 +1603,7 @@ * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. * This will prevent position updates from being displayed. */ - #if ENABLED(U8GLIB_ST7920) + #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. //#define DOGM_SPI_DELAY_US 5 diff --git a/config/examples/AnyCubic/i3 Mega/Configuration.h b/config/examples/AnyCubic/i3 Mega/Configuration.h index 6a53a61dab..501146744c 100644 --- a/config/examples/AnyCubic/i3 Mega/Configuration.h +++ b/config/examples/AnyCubic/i3 Mega/Configuration.h @@ -2412,6 +2412,11 @@ //#define VIKI2 //#define miniVIKI +// +// Alfawise Ex8 printer LCD marked as WYH L12864 COG +// +//#define WYH_L12864 + // // MakerLab Mini Panel with graphic // controller and SD support - https://reprap.org/wiki/Mini_panel diff --git a/config/examples/AnyCubic/i3 Mega/Configuration_adv.h b/config/examples/AnyCubic/i3 Mega/Configuration_adv.h index 749d962d9c..3d46424be9 100644 --- a/config/examples/AnyCubic/i3 Mega/Configuration_adv.h +++ b/config/examples/AnyCubic/i3 Mega/Configuration_adv.h @@ -1603,7 +1603,7 @@ * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. * This will prevent position updates from being displayed. */ - #if ENABLED(U8GLIB_ST7920) + #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. //#define DOGM_SPI_DELAY_US 5 diff --git a/config/examples/AnyCubic/i3/Configuration.h b/config/examples/AnyCubic/i3/Configuration.h index a78f141e96..b1583743bd 100644 --- a/config/examples/AnyCubic/i3/Configuration.h +++ b/config/examples/AnyCubic/i3/Configuration.h @@ -2376,6 +2376,11 @@ //#define VIKI2 //#define miniVIKI +// +// Alfawise Ex8 printer LCD marked as WYH L12864 COG +// +//#define WYH_L12864 + // // MakerLab Mini Panel with graphic // controller and SD support - https://reprap.org/wiki/Mini_panel diff --git a/config/examples/AnyCubic/i3/Configuration_adv.h b/config/examples/AnyCubic/i3/Configuration_adv.h index ea79fb5d55..7b26be6bd3 100644 --- a/config/examples/AnyCubic/i3/Configuration_adv.h +++ b/config/examples/AnyCubic/i3/Configuration_adv.h @@ -1603,7 +1603,7 @@ * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. * This will prevent position updates from being displayed. */ - #if ENABLED(U8GLIB_ST7920) + #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. //#define DOGM_SPI_DELAY_US 5 diff --git a/config/examples/ArmEd/Configuration.h b/config/examples/ArmEd/Configuration.h index 15a5c93dff..58d91538ff 100644 --- a/config/examples/ArmEd/Configuration.h +++ b/config/examples/ArmEd/Configuration.h @@ -2377,6 +2377,11 @@ //#define VIKI2 //#define miniVIKI +// +// Alfawise Ex8 printer LCD marked as WYH L12864 COG +// +//#define WYH_L12864 + // // MakerLab Mini Panel with graphic // controller and SD support - https://reprap.org/wiki/Mini_panel diff --git a/config/examples/ArmEd/Configuration_adv.h b/config/examples/ArmEd/Configuration_adv.h index 06db2d6391..ac8315222e 100644 --- a/config/examples/ArmEd/Configuration_adv.h +++ b/config/examples/ArmEd/Configuration_adv.h @@ -1607,7 +1607,7 @@ * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. * This will prevent position updates from being displayed. */ - #if ENABLED(U8GLIB_ST7920) + #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. //#define DOGM_SPI_DELAY_US 5 diff --git a/config/examples/Artillery/Genius/Configuration.h b/config/examples/Artillery/Genius/Configuration.h index d66842db0f..ba95ff31bf 100644 --- a/config/examples/Artillery/Genius/Configuration.h +++ b/config/examples/Artillery/Genius/Configuration.h @@ -2376,6 +2376,11 @@ //#define VIKI2 //#define miniVIKI +// +// Alfawise Ex8 printer LCD marked as WYH L12864 COG +// +//#define WYH_L12864 + // // MakerLab Mini Panel with graphic // controller and SD support - https://reprap.org/wiki/Mini_panel diff --git a/config/examples/Artillery/Genius/Configuration_adv.h b/config/examples/Artillery/Genius/Configuration_adv.h index 448da4a6bf..fd03f45b68 100644 --- a/config/examples/Artillery/Genius/Configuration_adv.h +++ b/config/examples/Artillery/Genius/Configuration_adv.h @@ -1603,7 +1603,7 @@ * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. * This will prevent position updates from being displayed. */ - #if ENABLED(U8GLIB_ST7920) + #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. //#define DOGM_SPI_DELAY_US 5 diff --git a/config/examples/Artillery/Sidewinder X1/Configuration.h b/config/examples/Artillery/Sidewinder X1/Configuration.h index 04f409902b..899c360b16 100644 --- a/config/examples/Artillery/Sidewinder X1/Configuration.h +++ b/config/examples/Artillery/Sidewinder X1/Configuration.h @@ -2376,6 +2376,11 @@ //#define VIKI2 //#define miniVIKI +// +// Alfawise Ex8 printer LCD marked as WYH L12864 COG +// +//#define WYH_L12864 + // // MakerLab Mini Panel with graphic // controller and SD support - https://reprap.org/wiki/Mini_panel diff --git a/config/examples/Artillery/Sidewinder X1/Configuration_adv.h b/config/examples/Artillery/Sidewinder X1/Configuration_adv.h index 448da4a6bf..fd03f45b68 100644 --- a/config/examples/Artillery/Sidewinder X1/Configuration_adv.h +++ b/config/examples/Artillery/Sidewinder X1/Configuration_adv.h @@ -1603,7 +1603,7 @@ * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. * This will prevent position updates from being displayed. */ - #if ENABLED(U8GLIB_ST7920) + #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. //#define DOGM_SPI_DELAY_US 5 diff --git a/config/examples/Artillery/Sidewinder X1_0.9_degree_BMG_E3D_V6/Configuration.h b/config/examples/Artillery/Sidewinder X1_0.9_degree_BMG_E3D_V6/Configuration.h index 8994188a93..4240e30f9d 100644 --- a/config/examples/Artillery/Sidewinder X1_0.9_degree_BMG_E3D_V6/Configuration.h +++ b/config/examples/Artillery/Sidewinder X1_0.9_degree_BMG_E3D_V6/Configuration.h @@ -2392,6 +2392,11 @@ //#define VIKI2 //#define miniVIKI +// +// Alfawise Ex8 printer LCD marked as WYH L12864 COG +// +//#define WYH_L12864 + // // MakerLab Mini Panel with graphic // controller and SD support - https://reprap.org/wiki/Mini_panel diff --git a/config/examples/Artillery/Sidewinder X1_0.9_degree_BMG_E3D_V6/Configuration_adv.h b/config/examples/Artillery/Sidewinder X1_0.9_degree_BMG_E3D_V6/Configuration_adv.h index a9a64abe2e..ab8198241c 100644 --- a/config/examples/Artillery/Sidewinder X1_0.9_degree_BMG_E3D_V6/Configuration_adv.h +++ b/config/examples/Artillery/Sidewinder X1_0.9_degree_BMG_E3D_V6/Configuration_adv.h @@ -1603,7 +1603,7 @@ * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. * This will prevent position updates from being displayed. */ - #if ENABLED(U8GLIB_ST7920) + #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. //#define DOGM_SPI_DELAY_US 5 diff --git a/config/examples/Azteeg/X5GT/Configuration.h b/config/examples/Azteeg/X5GT/Configuration.h index 8bdd4c9ede..c8e4862756 100644 --- a/config/examples/Azteeg/X5GT/Configuration.h +++ b/config/examples/Azteeg/X5GT/Configuration.h @@ -2376,6 +2376,11 @@ #define VIKI2 //#define miniVIKI +// +// Alfawise Ex8 printer LCD marked as WYH L12864 COG +// +//#define WYH_L12864 + // // MakerLab Mini Panel with graphic // controller and SD support - https://reprap.org/wiki/Mini_panel diff --git a/config/examples/Azteeg/X5GT/Configuration_adv.h b/config/examples/Azteeg/X5GT/Configuration_adv.h index 63b768cfea..4a9eabfac2 100644 --- a/config/examples/Azteeg/X5GT/Configuration_adv.h +++ b/config/examples/Azteeg/X5GT/Configuration_adv.h @@ -1603,7 +1603,7 @@ * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. * This will prevent position updates from being displayed. */ - #if ENABLED(U8GLIB_ST7920) + #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. //#define DOGM_SPI_DELAY_US 5 diff --git a/config/examples/BIBO/TouchX/cyclops/Configuration.h b/config/examples/BIBO/TouchX/cyclops/Configuration.h index 7a75f7cf3f..acb734d1c1 100644 --- a/config/examples/BIBO/TouchX/cyclops/Configuration.h +++ b/config/examples/BIBO/TouchX/cyclops/Configuration.h @@ -2376,6 +2376,11 @@ //#define VIKI2 //#define miniVIKI +// +// Alfawise Ex8 printer LCD marked as WYH L12864 COG +// +//#define WYH_L12864 + // // MakerLab Mini Panel with graphic // controller and SD support - https://reprap.org/wiki/Mini_panel diff --git a/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h b/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h index 0f713e1eba..1af5100309 100644 --- a/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h +++ b/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h @@ -1603,7 +1603,7 @@ * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. * This will prevent position updates from being displayed. */ - #if ENABLED(U8GLIB_ST7920) + #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. //#define DOGM_SPI_DELAY_US 5 diff --git a/config/examples/BIBO/TouchX/default/Configuration.h b/config/examples/BIBO/TouchX/default/Configuration.h index dd1dca3cbf..7647517467 100644 --- a/config/examples/BIBO/TouchX/default/Configuration.h +++ b/config/examples/BIBO/TouchX/default/Configuration.h @@ -2330,6 +2330,11 @@ //#define VIKI2 //#define miniVIKI +// +// Alfawise Ex8 printer LCD marked as WYH L12864 COG +// +//#define WYH_L12864 + // // MakerLab Mini Panel with graphic // controller and SD support - https://reprap.org/wiki/Mini_panel diff --git a/config/examples/BIBO/TouchX/default/Configuration_adv.h b/config/examples/BIBO/TouchX/default/Configuration_adv.h index 5b154de962..1574218a78 100644 --- a/config/examples/BIBO/TouchX/default/Configuration_adv.h +++ b/config/examples/BIBO/TouchX/default/Configuration_adv.h @@ -1596,7 +1596,7 @@ * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. * This will prevent position updates from being displayed. */ - #if ENABLED(U8GLIB_ST7920) + #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. //#define DOGM_SPI_DELAY_US 5 diff --git a/config/examples/BIQU/B1-BLTouch/Configuration.h b/config/examples/BIQU/B1-BLTouch/Configuration.h index 15941f7be2..fc26449f7f 100644 --- a/config/examples/BIQU/B1-BLTouch/Configuration.h +++ b/config/examples/BIQU/B1-BLTouch/Configuration.h @@ -2382,6 +2382,11 @@ //#define VIKI2 //#define miniVIKI +// +// Alfawise Ex8 printer LCD marked as WYH L12864 COG +// +//#define WYH_L12864 + // // MakerLab Mini Panel with graphic // controller and SD support - https://reprap.org/wiki/Mini_panel diff --git a/config/examples/BIQU/B1-BLTouch/Configuration_adv.h b/config/examples/BIQU/B1-BLTouch/Configuration_adv.h index 14da43e37b..6fd227abb5 100644 --- a/config/examples/BIQU/B1-BLTouch/Configuration_adv.h +++ b/config/examples/BIQU/B1-BLTouch/Configuration_adv.h @@ -1603,7 +1603,7 @@ * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. * This will prevent position updates from being displayed. */ - #if ENABLED(U8GLIB_ST7920) + #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. //#define DOGM_SPI_DELAY_US 5 diff --git a/config/examples/BIQU/B1/Configuration.h b/config/examples/BIQU/B1/Configuration.h index 9c049bae62..5091efa296 100644 --- a/config/examples/BIQU/B1/Configuration.h +++ b/config/examples/BIQU/B1/Configuration.h @@ -2382,6 +2382,11 @@ //#define VIKI2 //#define miniVIKI +// +// Alfawise Ex8 printer LCD marked as WYH L12864 COG +// +//#define WYH_L12864 + // // MakerLab Mini Panel with graphic // controller and SD support - https://reprap.org/wiki/Mini_panel diff --git a/config/examples/BIQU/B1/Configuration_adv.h b/config/examples/BIQU/B1/Configuration_adv.h index 3e3bbf49ad..143879dcdc 100644 --- a/config/examples/BIQU/B1/Configuration_adv.h +++ b/config/examples/BIQU/B1/Configuration_adv.h @@ -1603,7 +1603,7 @@ * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. * This will prevent position updates from being displayed. */ - #if ENABLED(U8GLIB_ST7920) + #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. //#define DOGM_SPI_DELAY_US 5 diff --git a/config/examples/BQ/Hephestos/Configuration.h b/config/examples/BQ/Hephestos/Configuration.h index 89daa10051..37e59b3f6d 100644 --- a/config/examples/BQ/Hephestos/Configuration.h +++ b/config/examples/BQ/Hephestos/Configuration.h @@ -2377,6 +2377,11 @@ //#define VIKI2 //#define miniVIKI +// +// Alfawise Ex8 printer LCD marked as WYH L12864 COG +// +//#define WYH_L12864 + // // MakerLab Mini Panel with graphic // controller and SD support - https://reprap.org/wiki/Mini_panel diff --git a/config/examples/BQ/Hephestos/Configuration_adv.h b/config/examples/BQ/Hephestos/Configuration_adv.h index b733f53754..ec51790940 100644 --- a/config/examples/BQ/Hephestos/Configuration_adv.h +++ b/config/examples/BQ/Hephestos/Configuration_adv.h @@ -1603,7 +1603,7 @@ * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. * This will prevent position updates from being displayed. */ - #if ENABLED(U8GLIB_ST7920) + #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. //#define DOGM_SPI_DELAY_US 5 diff --git a/config/examples/BQ/Hephestos_2/Configuration.h b/config/examples/BQ/Hephestos_2/Configuration.h index 364ce7c0d7..9c7cf70b7a 100644 --- a/config/examples/BQ/Hephestos_2/Configuration.h +++ b/config/examples/BQ/Hephestos_2/Configuration.h @@ -2390,6 +2390,11 @@ //#define VIKI2 //#define miniVIKI +// +// Alfawise Ex8 printer LCD marked as WYH L12864 COG +// +//#define WYH_L12864 + // // MakerLab Mini Panel with graphic // controller and SD support - https://reprap.org/wiki/Mini_panel diff --git a/config/examples/BQ/Hephestos_2/Configuration_adv.h b/config/examples/BQ/Hephestos_2/Configuration_adv.h index f88ae558aa..3d05b5816f 100644 --- a/config/examples/BQ/Hephestos_2/Configuration_adv.h +++ b/config/examples/BQ/Hephestos_2/Configuration_adv.h @@ -1611,7 +1611,7 @@ * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. * This will prevent position updates from being displayed. */ - #if ENABLED(U8GLIB_ST7920) + #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. //#define DOGM_SPI_DELAY_US 5 diff --git a/config/examples/BQ/WITBOX/Configuration.h b/config/examples/BQ/WITBOX/Configuration.h index 845cd83f6c..6d31e7f9d4 100644 --- a/config/examples/BQ/WITBOX/Configuration.h +++ b/config/examples/BQ/WITBOX/Configuration.h @@ -2377,6 +2377,11 @@ //#define VIKI2 //#define miniVIKI +// +// Alfawise Ex8 printer LCD marked as WYH L12864 COG +// +//#define WYH_L12864 + // // MakerLab Mini Panel with graphic // controller and SD support - https://reprap.org/wiki/Mini_panel diff --git a/config/examples/BQ/WITBOX/Configuration_adv.h b/config/examples/BQ/WITBOX/Configuration_adv.h index b733f53754..ec51790940 100644 --- a/config/examples/BQ/WITBOX/Configuration_adv.h +++ b/config/examples/BQ/WITBOX/Configuration_adv.h @@ -1603,7 +1603,7 @@ * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. * This will prevent position updates from being displayed. */ - #if ENABLED(U8GLIB_ST7920) + #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. //#define DOGM_SPI_DELAY_US 5 diff --git a/config/examples/CTC/A13/Configuration.h b/config/examples/CTC/A13/Configuration.h index 939daa276c..7d5e4ca531 100644 --- a/config/examples/CTC/A13/Configuration.h +++ b/config/examples/CTC/A13/Configuration.h @@ -2378,6 +2378,11 @@ //#define VIKI2 //#define miniVIKI +// +// Alfawise Ex8 printer LCD marked as WYH L12864 COG +// +//#define WYH_L12864 + // // MakerLab Mini Panel with graphic // controller and SD support - https://reprap.org/wiki/Mini_panel diff --git a/config/examples/CTC/A13/Configuration_adv.h b/config/examples/CTC/A13/Configuration_adv.h index cf35fdea0f..3058eeee8e 100644 --- a/config/examples/CTC/A13/Configuration_adv.h +++ b/config/examples/CTC/A13/Configuration_adv.h @@ -1603,7 +1603,7 @@ * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. * This will prevent position updates from being displayed. */ - #if ENABLED(U8GLIB_ST7920) + #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. //#define DOGM_SPI_DELAY_US 5 diff --git a/config/examples/CTC/i3 2560 Rev A/no probe/Configuration.h b/config/examples/CTC/i3 2560 Rev A/no probe/Configuration.h index d55c78309c..aa1872e188 100644 --- a/config/examples/CTC/i3 2560 Rev A/no probe/Configuration.h +++ b/config/examples/CTC/i3 2560 Rev A/no probe/Configuration.h @@ -2377,6 +2377,11 @@ //#define VIKI2 //#define miniVIKI +// +// Alfawise Ex8 printer LCD marked as WYH L12864 COG +// +//#define WYH_L12864 + // // MakerLab Mini Panel with graphic // controller and SD support - https://reprap.org/wiki/Mini_panel diff --git a/config/examples/Cartesio/Configuration.h b/config/examples/Cartesio/Configuration.h index aceeda13a3..618fe1d9d1 100644 --- a/config/examples/Cartesio/Configuration.h +++ b/config/examples/Cartesio/Configuration.h @@ -2392,6 +2392,11 @@ //#define VIKI2 //#define miniVIKI +// +// Alfawise Ex8 printer LCD marked as WYH L12864 COG +// +//#define WYH_L12864 + // // MakerLab Mini Panel with graphic // controller and SD support - https://reprap.org/wiki/Mini_panel diff --git a/config/examples/Cartesio/Configuration_adv.h b/config/examples/Cartesio/Configuration_adv.h index aab0c8739d..ffbec20ea4 100644 --- a/config/examples/Cartesio/Configuration_adv.h +++ b/config/examples/Cartesio/Configuration_adv.h @@ -1603,7 +1603,7 @@ * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. * This will prevent position updates from being displayed. */ - #if ENABLED(U8GLIB_ST7920) + #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. //#define DOGM_SPI_DELAY_US 5 diff --git a/config/examples/Copymaster3D/300/Configuration.h b/config/examples/Copymaster3D/300/Configuration.h index dff500367a..e9a6e255d3 100644 --- a/config/examples/Copymaster3D/300/Configuration.h +++ b/config/examples/Copymaster3D/300/Configuration.h @@ -2377,6 +2377,11 @@ //#define VIKI2 //#define miniVIKI +// +// Alfawise Ex8 printer LCD marked as WYH L12864 COG +// +//#define WYH_L12864 + // // MakerLab Mini Panel with graphic // controller and SD support - https://reprap.org/wiki/Mini_panel diff --git a/config/examples/Copymaster3D/400/Configuration.h b/config/examples/Copymaster3D/400/Configuration.h index 5a7b5556b2..902f8f614b 100644 --- a/config/examples/Copymaster3D/400/Configuration.h +++ b/config/examples/Copymaster3D/400/Configuration.h @@ -2376,6 +2376,11 @@ //#define VIKI2 //#define miniVIKI +// +// Alfawise Ex8 printer LCD marked as WYH L12864 COG +// +//#define WYH_L12864 + // // MakerLab Mini Panel with graphic // controller and SD support - https://reprap.org/wiki/Mini_panel diff --git a/config/examples/Copymaster3D/500/Configuration.h b/config/examples/Copymaster3D/500/Configuration.h index 5fb41c445f..71466c35b6 100644 --- a/config/examples/Copymaster3D/500/Configuration.h +++ b/config/examples/Copymaster3D/500/Configuration.h @@ -2377,6 +2377,11 @@ //#define VIKI2 //#define miniVIKI +// +// Alfawise Ex8 printer LCD marked as WYH L12864 COG +// +//#define WYH_L12864 + // // MakerLab Mini Panel with graphic // controller and SD support - https://reprap.org/wiki/Mini_panel diff --git a/config/examples/Creality/CR-10 Mini/BigTreeTech SKR Mini E3 2.0/Configuration.h b/config/examples/Creality/CR-10 Mini/BigTreeTech SKR Mini E3 2.0/Configuration.h index fa3139a601..6c94f38991 100644 --- a/config/examples/Creality/CR-10 Mini/BigTreeTech SKR Mini E3 2.0/Configuration.h +++ b/config/examples/Creality/CR-10 Mini/BigTreeTech SKR Mini E3 2.0/Configuration.h @@ -2385,6 +2385,11 @@ //#define VIKI2 //#define miniVIKI +// +// Alfawise Ex8 printer LCD marked as WYH L12864 COG +// +//#define WYH_L12864 + // // MakerLab Mini Panel with graphic // controller and SD support - https://reprap.org/wiki/Mini_panel diff --git a/config/examples/Creality/CR-10 Mini/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h b/config/examples/Creality/CR-10 Mini/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h index 8b9a216783..d56baa6704 100644 --- a/config/examples/Creality/CR-10 Mini/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h +++ b/config/examples/Creality/CR-10 Mini/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h @@ -1603,7 +1603,7 @@ * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. * This will prevent position updates from being displayed. */ - #if ENABLED(U8GLIB_ST7920) + #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. //#define DOGM_SPI_DELAY_US 5 diff --git a/config/examples/Creality/CR-10 Mini/CrealityV1/Configuration.h b/config/examples/Creality/CR-10 Mini/CrealityV1/Configuration.h index cfb96c1b0e..88a30e55fc 100644 --- a/config/examples/Creality/CR-10 Mini/CrealityV1/Configuration.h +++ b/config/examples/Creality/CR-10 Mini/CrealityV1/Configuration.h @@ -2385,6 +2385,11 @@ //#define VIKI2 //#define miniVIKI +// +// Alfawise Ex8 printer LCD marked as WYH L12864 COG +// +//#define WYH_L12864 + // // MakerLab Mini Panel with graphic // controller and SD support - https://reprap.org/wiki/Mini_panel diff --git a/config/examples/Creality/CR-10 Mini/CrealityV1/Configuration_adv.h b/config/examples/Creality/CR-10 Mini/CrealityV1/Configuration_adv.h index fbe503b7be..797f684338 100644 --- a/config/examples/Creality/CR-10 Mini/CrealityV1/Configuration_adv.h +++ b/config/examples/Creality/CR-10 Mini/CrealityV1/Configuration_adv.h @@ -1603,7 +1603,7 @@ * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. * This will prevent position updates from being displayed. */ - #if ENABLED(U8GLIB_ST7920) + #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. //#define DOGM_SPI_DELAY_US 5 diff --git a/config/examples/Creality/CR-10 Mini/MEEB-3DP/Configuration.h b/config/examples/Creality/CR-10 Mini/MEEB-3DP/Configuration.h index 73ce724e1a..2dd64a75e2 100644 --- a/config/examples/Creality/CR-10 Mini/MEEB-3DP/Configuration.h +++ b/config/examples/Creality/CR-10 Mini/MEEB-3DP/Configuration.h @@ -2376,6 +2376,11 @@ //#define VIKI2 //#define miniVIKI +// +// Alfawise Ex8 printer LCD marked as WYH L12864 COG +// +//#define WYH_L12864 + // // MakerLab Mini Panel with graphic // controller and SD support - https://reprap.org/wiki/Mini_panel diff --git a/config/examples/Creality/CR-10 Mini/MEEB-3DP/Configuration_adv.h b/config/examples/Creality/CR-10 Mini/MEEB-3DP/Configuration_adv.h index 36f0c9d994..d910dbc2a5 100644 --- a/config/examples/Creality/CR-10 Mini/MEEB-3DP/Configuration_adv.h +++ b/config/examples/Creality/CR-10 Mini/MEEB-3DP/Configuration_adv.h @@ -1603,7 +1603,7 @@ * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. * This will prevent position updates from being displayed. */ - #if ENABLED(U8GLIB_ST7920) + #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. //#define DOGM_SPI_DELAY_US 5 diff --git a/config/examples/Creality/CR-10 S4/CrealityV1/Configuration.h b/config/examples/Creality/CR-10 S4/CrealityV1/Configuration.h index 4f7ce21730..83b45f649c 100644 --- a/config/examples/Creality/CR-10 S4/CrealityV1/Configuration.h +++ b/config/examples/Creality/CR-10 S4/CrealityV1/Configuration.h @@ -2391,6 +2391,11 @@ //#define VIKI2 //#define miniVIKI +// +// Alfawise Ex8 printer LCD marked as WYH L12864 COG +// +//#define WYH_L12864 + // // MakerLab Mini Panel with graphic // controller and SD support - https://reprap.org/wiki/Mini_panel diff --git a/config/examples/Creality/CR-10 S4/CrealityV1/Configuration_adv.h b/config/examples/Creality/CR-10 S4/CrealityV1/Configuration_adv.h index fa5207a451..ace5b1bbd0 100644 --- a/config/examples/Creality/CR-10 S4/CrealityV1/Configuration_adv.h +++ b/config/examples/Creality/CR-10 S4/CrealityV1/Configuration_adv.h @@ -1603,7 +1603,7 @@ * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. * This will prevent position updates from being displayed. */ - #if ENABLED(U8GLIB_ST7920) + #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. //#define DOGM_SPI_DELAY_US 5 diff --git a/config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 1.2 with TFT35 E3 V3.0/Configuration.h b/config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 1.2 with TFT35 E3 V3.0/Configuration.h index 9bc20fd8db..497fbd3b7f 100644 --- a/config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 1.2 with TFT35 E3 V3.0/Configuration.h +++ b/config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 1.2 with TFT35 E3 V3.0/Configuration.h @@ -2379,6 +2379,11 @@ //#define VIKI2 //#define miniVIKI +// +// Alfawise Ex8 printer LCD marked as WYH L12864 COG +// +//#define WYH_L12864 + // // MakerLab Mini Panel with graphic // controller and SD support - https://reprap.org/wiki/Mini_panel diff --git a/config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 1.2 with TFT35 E3 V3.0/Configuration_adv.h b/config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 1.2 with TFT35 E3 V3.0/Configuration_adv.h index 909afd5388..93e208770a 100644 --- a/config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 1.2 with TFT35 E3 V3.0/Configuration_adv.h +++ b/config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 1.2 with TFT35 E3 V3.0/Configuration_adv.h @@ -1603,7 +1603,7 @@ * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. * This will prevent position updates from being displayed. */ - #if ENABLED(U8GLIB_ST7920) + #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. //#define DOGM_SPI_DELAY_US 5 diff --git a/config/examples/Creality/CR-10 S5/CrealityV1/Configuration.h b/config/examples/Creality/CR-10 S5/CrealityV1/Configuration.h index 1351d71301..17114f22d5 100644 --- a/config/examples/Creality/CR-10 S5/CrealityV1/Configuration.h +++ b/config/examples/Creality/CR-10 S5/CrealityV1/Configuration.h @@ -2379,6 +2379,11 @@ //#define VIKI2 //#define miniVIKI +// +// Alfawise Ex8 printer LCD marked as WYH L12864 COG +// +//#define WYH_L12864 + // // MakerLab Mini Panel with graphic // controller and SD support - https://reprap.org/wiki/Mini_panel diff --git a/config/examples/Creality/CR-10 S5/CrealityV1/Configuration_adv.h b/config/examples/Creality/CR-10 S5/CrealityV1/Configuration_adv.h index fa5207a451..ace5b1bbd0 100644 --- a/config/examples/Creality/CR-10 S5/CrealityV1/Configuration_adv.h +++ b/config/examples/Creality/CR-10 S5/CrealityV1/Configuration_adv.h @@ -1603,7 +1603,7 @@ * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. * This will prevent position updates from being displayed. */ - #if ENABLED(U8GLIB_ST7920) + #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. //#define DOGM_SPI_DELAY_US 5 diff --git a/config/examples/Creality/CR-10 S5/CrealityV2.2-BLTouch/Configuration.h b/config/examples/Creality/CR-10 S5/CrealityV2.2-BLTouch/Configuration.h index eaf644b41f..ec29cd13a6 100644 --- a/config/examples/Creality/CR-10 S5/CrealityV2.2-BLTouch/Configuration.h +++ b/config/examples/Creality/CR-10 S5/CrealityV2.2-BLTouch/Configuration.h @@ -2380,6 +2380,11 @@ //#define VIKI2 //#define miniVIKI +// +// Alfawise Ex8 printer LCD marked as WYH L12864 COG +// +//#define WYH_L12864 + // // MakerLab Mini Panel with graphic // controller and SD support - https://reprap.org/wiki/Mini_panel diff --git a/config/examples/Creality/CR-10 S5/CrealityV2.2-BLTouch/Configuration_adv.h b/config/examples/Creality/CR-10 S5/CrealityV2.2-BLTouch/Configuration_adv.h index aba78b08df..9d7a4da9f8 100644 --- a/config/examples/Creality/CR-10 S5/CrealityV2.2-BLTouch/Configuration_adv.h +++ b/config/examples/Creality/CR-10 S5/CrealityV2.2-BLTouch/Configuration_adv.h @@ -1603,7 +1603,7 @@ * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. * This will prevent position updates from being displayed. */ - #if ENABLED(U8GLIB_ST7920) + #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. //#define DOGM_SPI_DELAY_US 5 diff --git a/config/examples/Creality/CR-10 V2/Configuration.h b/config/examples/Creality/CR-10 V2/Configuration.h index f90d598d77..383694c628 100644 --- a/config/examples/Creality/CR-10 V2/Configuration.h +++ b/config/examples/Creality/CR-10 V2/Configuration.h @@ -2405,6 +2405,11 @@ //#define VIKI2 //#define miniVIKI +// +// Alfawise Ex8 printer LCD marked as WYH L12864 COG +// +//#define WYH_L12864 + // // MakerLab Mini Panel with graphic // controller and SD support - https://reprap.org/wiki/Mini_panel diff --git a/config/examples/Creality/CR-10 V2/Configuration_adv.h b/config/examples/Creality/CR-10 V2/Configuration_adv.h index 8fbc8358db..b95b8385f9 100644 --- a/config/examples/Creality/CR-10 V2/Configuration_adv.h +++ b/config/examples/Creality/CR-10 V2/Configuration_adv.h @@ -1603,7 +1603,7 @@ * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. * This will prevent position updates from being displayed. */ - #if ENABLED(U8GLIB_ST7920) + #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. //#define DOGM_SPI_DELAY_US 5 diff --git a/config/examples/Creality/CR-10 V3/Configuration.h b/config/examples/Creality/CR-10 V3/Configuration.h index 3695672a50..2bc921135e 100644 --- a/config/examples/Creality/CR-10 V3/Configuration.h +++ b/config/examples/Creality/CR-10 V3/Configuration.h @@ -2410,6 +2410,11 @@ //#define VIKI2 //#define miniVIKI +// +// Alfawise Ex8 printer LCD marked as WYH L12864 COG +// +//#define WYH_L12864 + // // MakerLab Mini Panel with graphic // controller and SD support - https://reprap.org/wiki/Mini_panel diff --git a/config/examples/Creality/CR-10 V3/Configuration_adv.h b/config/examples/Creality/CR-10 V3/Configuration_adv.h index 3c6b23f48c..7e0eb48ab4 100644 --- a/config/examples/Creality/CR-10 V3/Configuration_adv.h +++ b/config/examples/Creality/CR-10 V3/Configuration_adv.h @@ -1605,7 +1605,7 @@ * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. * This will prevent position updates from being displayed. */ - #if ENABLED(U8GLIB_ST7920) + #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. //#define DOGM_SPI_DELAY_US 5 diff --git a/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 2.0/Configuration.h b/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 2.0/Configuration.h index 5856f15b1a..23f78979b4 100644 --- a/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 2.0/Configuration.h +++ b/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 2.0/Configuration.h @@ -2387,6 +2387,11 @@ //#define VIKI2 //#define miniVIKI +// +// Alfawise Ex8 printer LCD marked as WYH L12864 COG +// +//#define WYH_L12864 + // // MakerLab Mini Panel with graphic // controller and SD support - https://reprap.org/wiki/Mini_panel diff --git a/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h b/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h index 1cb43f335e..2eb1c27427 100644 --- a/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h +++ b/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h @@ -1603,7 +1603,7 @@ * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. * This will prevent position updates from being displayed. */ - #if ENABLED(U8GLIB_ST7920) + #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. //#define DOGM_SPI_DELAY_US 5 diff --git a/config/examples/Creality/CR-10/CrealityV1/Configuration.h b/config/examples/Creality/CR-10/CrealityV1/Configuration.h index b442364dc7..b06222376e 100644 --- a/config/examples/Creality/CR-10/CrealityV1/Configuration.h +++ b/config/examples/Creality/CR-10/CrealityV1/Configuration.h @@ -2376,6 +2376,11 @@ //#define VIKI2 //#define miniVIKI +// +// Alfawise Ex8 printer LCD marked as WYH L12864 COG +// +//#define WYH_L12864 + // // MakerLab Mini Panel with graphic // controller and SD support - https://reprap.org/wiki/Mini_panel diff --git a/config/examples/Creality/CR-10/CrealityV1/Configuration_adv.h b/config/examples/Creality/CR-10/CrealityV1/Configuration_adv.h index 7e5cdb8a5d..bb6e94fd26 100644 --- a/config/examples/Creality/CR-10/CrealityV1/Configuration_adv.h +++ b/config/examples/Creality/CR-10/CrealityV1/Configuration_adv.h @@ -1603,7 +1603,7 @@ * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. * This will prevent position updates from being displayed. */ - #if ENABLED(U8GLIB_ST7920) + #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. //#define DOGM_SPI_DELAY_US 5 diff --git a/config/examples/Creality/CR-10S/BigTreeTech SKR 1.4 Turbo TMC2209/Configuration.h b/config/examples/Creality/CR-10S/BigTreeTech SKR 1.4 Turbo TMC2209/Configuration.h index c26aa9cd10..d1b5b13f78 100644 --- a/config/examples/Creality/CR-10S/BigTreeTech SKR 1.4 Turbo TMC2209/Configuration.h +++ b/config/examples/Creality/CR-10S/BigTreeTech SKR 1.4 Turbo TMC2209/Configuration.h @@ -2388,6 +2388,11 @@ //#define VIKI2 //#define miniVIKI +// +// Alfawise Ex8 printer LCD marked as WYH L12864 COG +// +//#define WYH_L12864 + // // MakerLab Mini Panel with graphic // controller and SD support - https://reprap.org/wiki/Mini_panel diff --git a/config/examples/Creality/CR-10S/BigTreeTech SKR 1.4 Turbo TMC2209/Configuration_adv.h b/config/examples/Creality/CR-10S/BigTreeTech SKR 1.4 Turbo TMC2209/Configuration_adv.h index 52d3972827..d98fd37cf0 100644 --- a/config/examples/Creality/CR-10S/BigTreeTech SKR 1.4 Turbo TMC2209/Configuration_adv.h +++ b/config/examples/Creality/CR-10S/BigTreeTech SKR 1.4 Turbo TMC2209/Configuration_adv.h @@ -1603,7 +1603,7 @@ * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. * This will prevent position updates from being displayed. */ - #if ENABLED(U8GLIB_ST7920) + #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. //#define DOGM_SPI_DELAY_US 5 diff --git a/config/examples/Creality/CR-10S/BigTreeTech SKR Mini E3 2.0/Configuration.h b/config/examples/Creality/CR-10S/BigTreeTech SKR Mini E3 2.0/Configuration.h index 135033001d..bacc101ae8 100644 --- a/config/examples/Creality/CR-10S/BigTreeTech SKR Mini E3 2.0/Configuration.h +++ b/config/examples/Creality/CR-10S/BigTreeTech SKR Mini E3 2.0/Configuration.h @@ -2389,6 +2389,11 @@ //#define VIKI2 //#define miniVIKI +// +// Alfawise Ex8 printer LCD marked as WYH L12864 COG +// +//#define WYH_L12864 + // // MakerLab Mini Panel with graphic // controller and SD support - https://reprap.org/wiki/Mini_panel diff --git a/config/examples/Creality/CR-10S/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h b/config/examples/Creality/CR-10S/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h index f6caa37270..ff104b7591 100644 --- a/config/examples/Creality/CR-10S/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h +++ b/config/examples/Creality/CR-10S/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h @@ -1603,7 +1603,7 @@ * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. * This will prevent position updates from being displayed. */ - #if ENABLED(U8GLIB_ST7920) + #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. //#define DOGM_SPI_DELAY_US 5 diff --git a/config/examples/Creality/CR-10S/BigTreeTech SKR Pro v1.2/Configuration.h b/config/examples/Creality/CR-10S/BigTreeTech SKR Pro v1.2/Configuration.h index 065bad8682..56f03b0f71 100644 --- a/config/examples/Creality/CR-10S/BigTreeTech SKR Pro v1.2/Configuration.h +++ b/config/examples/Creality/CR-10S/BigTreeTech SKR Pro v1.2/Configuration.h @@ -2376,6 +2376,11 @@ //#define VIKI2 //#define miniVIKI +// +// Alfawise Ex8 printer LCD marked as WYH L12864 COG +// +//#define WYH_L12864 + // // MakerLab Mini Panel with graphic // controller and SD support - https://reprap.org/wiki/Mini_panel diff --git a/config/examples/Creality/CR-10S/BigTreeTech SKR Pro v1.2/Configuration_adv.h b/config/examples/Creality/CR-10S/BigTreeTech SKR Pro v1.2/Configuration_adv.h index 83abec4e09..8846279e5e 100644 --- a/config/examples/Creality/CR-10S/BigTreeTech SKR Pro v1.2/Configuration_adv.h +++ b/config/examples/Creality/CR-10S/BigTreeTech SKR Pro v1.2/Configuration_adv.h @@ -1603,7 +1603,7 @@ * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. * This will prevent position updates from being displayed. */ - #if ENABLED(U8GLIB_ST7920) + #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. //#define DOGM_SPI_DELAY_US 5 diff --git a/config/examples/Creality/CR-10S/CrealityV1/Configuration.h b/config/examples/Creality/CR-10S/CrealityV1/Configuration.h index 849410f2f2..f2fcf7964f 100644 --- a/config/examples/Creality/CR-10S/CrealityV1/Configuration.h +++ b/config/examples/Creality/CR-10S/CrealityV1/Configuration.h @@ -2377,6 +2377,11 @@ //#define VIKI2 //#define miniVIKI +// +// Alfawise Ex8 printer LCD marked as WYH L12864 COG +// +//#define WYH_L12864 + // // MakerLab Mini Panel with graphic // controller and SD support - https://reprap.org/wiki/Mini_panel diff --git a/config/examples/Creality/CR-10S/CrealityV1/Configuration_adv.h b/config/examples/Creality/CR-10S/CrealityV1/Configuration_adv.h index 80893ec8d9..f36b52d1e7 100644 --- a/config/examples/Creality/CR-10S/CrealityV1/Configuration_adv.h +++ b/config/examples/Creality/CR-10S/CrealityV1/Configuration_adv.h @@ -1603,7 +1603,7 @@ * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. * This will prevent position updates from being displayed. */ - #if ENABLED(U8GLIB_ST7920) + #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. //#define DOGM_SPI_DELAY_US 5 diff --git a/config/examples/Creality/CR-20 Pro/Configuration.h b/config/examples/Creality/CR-20 Pro/Configuration.h index 6eb72a3f16..bb8e1fe9a4 100644 --- a/config/examples/Creality/CR-20 Pro/Configuration.h +++ b/config/examples/Creality/CR-20 Pro/Configuration.h @@ -2379,6 +2379,11 @@ //#define VIKI2 //#define miniVIKI +// +// Alfawise Ex8 printer LCD marked as WYH L12864 COG +// +//#define WYH_L12864 + // // MakerLab Mini Panel with graphic // controller and SD support - https://reprap.org/wiki/Mini_panel diff --git a/config/examples/Creality/CR-20 Pro/Configuration_adv.h b/config/examples/Creality/CR-20 Pro/Configuration_adv.h index 9dc61be3fd..9dc1cf49c0 100644 --- a/config/examples/Creality/CR-20 Pro/Configuration_adv.h +++ b/config/examples/Creality/CR-20 Pro/Configuration_adv.h @@ -1603,7 +1603,7 @@ * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. * This will prevent position updates from being displayed. */ - #if ENABLED(U8GLIB_ST7920) + #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. //#define DOGM_SPI_DELAY_US 5 diff --git a/config/examples/Creality/CR-20/Configuration.h b/config/examples/Creality/CR-20/Configuration.h index e55f3fa2a3..1ba3c75896 100644 --- a/config/examples/Creality/CR-20/Configuration.h +++ b/config/examples/Creality/CR-20/Configuration.h @@ -2379,6 +2379,11 @@ //#define VIKI2 //#define miniVIKI +// +// Alfawise Ex8 printer LCD marked as WYH L12864 COG +// +//#define WYH_L12864 + // // MakerLab Mini Panel with graphic // controller and SD support - https://reprap.org/wiki/Mini_panel diff --git a/config/examples/Creality/CR-20/Configuration_adv.h b/config/examples/Creality/CR-20/Configuration_adv.h index c324941f68..5dabe8c64e 100644 --- a/config/examples/Creality/CR-20/Configuration_adv.h +++ b/config/examples/Creality/CR-20/Configuration_adv.h @@ -1603,7 +1603,7 @@ * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. * This will prevent position updates from being displayed. */ - #if ENABLED(U8GLIB_ST7920) + #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. //#define DOGM_SPI_DELAY_US 5 diff --git a/config/examples/Creality/CR-30 PrintMill/Configuration.h b/config/examples/Creality/CR-30 PrintMill/Configuration.h index 5ed133c838..20a3dfc5cf 100644 --- a/config/examples/Creality/CR-30 PrintMill/Configuration.h +++ b/config/examples/Creality/CR-30 PrintMill/Configuration.h @@ -2376,6 +2376,11 @@ //#define VIKI2 //#define miniVIKI +// +// Alfawise Ex8 printer LCD marked as WYH L12864 COG +// +//#define WYH_L12864 + // // MakerLab Mini Panel with graphic // controller and SD support - https://reprap.org/wiki/Mini_panel diff --git a/config/examples/Creality/CR-30 PrintMill/Configuration_adv.h b/config/examples/Creality/CR-30 PrintMill/Configuration_adv.h index 6a795506f1..68aa7bc51a 100644 --- a/config/examples/Creality/CR-30 PrintMill/Configuration_adv.h +++ b/config/examples/Creality/CR-30 PrintMill/Configuration_adv.h @@ -1603,7 +1603,7 @@ * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. * This will prevent position updates from being displayed. */ - #if ENABLED(U8GLIB_ST7920) + #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. //#define DOGM_SPI_DELAY_US 5 diff --git a/config/examples/Creality/CR-6 SE/Configuration.h b/config/examples/Creality/CR-6 SE/Configuration.h index 940d1a2efe..0e2a6a2129 100644 --- a/config/examples/Creality/CR-6 SE/Configuration.h +++ b/config/examples/Creality/CR-6 SE/Configuration.h @@ -2376,6 +2376,11 @@ //#define VIKI2 //#define miniVIKI +// +// Alfawise Ex8 printer LCD marked as WYH L12864 COG +// +//#define WYH_L12864 + // // MakerLab Mini Panel with graphic // controller and SD support - https://reprap.org/wiki/Mini_panel diff --git a/config/examples/Creality/CR-6 SE/Configuration_adv.h b/config/examples/Creality/CR-6 SE/Configuration_adv.h index 2d4a10a1b4..5ef4bfec5b 100644 --- a/config/examples/Creality/CR-6 SE/Configuration_adv.h +++ b/config/examples/Creality/CR-6 SE/Configuration_adv.h @@ -1604,7 +1604,7 @@ * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. * This will prevent position updates from being displayed. */ - #if ENABLED(U8GLIB_ST7920) + #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. //#define DOGM_SPI_DELAY_US 5 diff --git a/config/examples/Creality/CR-8/Configuration.h b/config/examples/Creality/CR-8/Configuration.h index 844383d8e1..0e729e627e 100644 --- a/config/examples/Creality/CR-8/Configuration.h +++ b/config/examples/Creality/CR-8/Configuration.h @@ -2376,6 +2376,11 @@ //#define VIKI2 //#define miniVIKI +// +// Alfawise Ex8 printer LCD marked as WYH L12864 COG +// +//#define WYH_L12864 + // // MakerLab Mini Panel with graphic // controller and SD support - https://reprap.org/wiki/Mini_panel diff --git a/config/examples/Creality/CR-8/Configuration_adv.h b/config/examples/Creality/CR-8/Configuration_adv.h index 92bbb0ee50..e957faec8e 100644 --- a/config/examples/Creality/CR-8/Configuration_adv.h +++ b/config/examples/Creality/CR-8/Configuration_adv.h @@ -1603,7 +1603,7 @@ * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. * This will prevent position updates from being displayed. */ - #if ENABLED(U8GLIB_ST7920) + #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. //#define DOGM_SPI_DELAY_US 5 diff --git a/config/examples/Creality/Ender-2/Configuration.h b/config/examples/Creality/Ender-2/Configuration.h index e4e8135d77..9c73b99014 100644 --- a/config/examples/Creality/Ender-2/Configuration.h +++ b/config/examples/Creality/Ender-2/Configuration.h @@ -2377,6 +2377,11 @@ //#define VIKI2 //#define miniVIKI +// +// Alfawise Ex8 printer LCD marked as WYH L12864 COG +// +//#define WYH_L12864 + // // MakerLab Mini Panel with graphic // controller and SD support - https://reprap.org/wiki/Mini_panel diff --git a/config/examples/Creality/Ender-2/Configuration_adv.h b/config/examples/Creality/Ender-2/Configuration_adv.h index bc971f9b31..dee31798c4 100644 --- a/config/examples/Creality/Ender-2/Configuration_adv.h +++ b/config/examples/Creality/Ender-2/Configuration_adv.h @@ -1603,7 +1603,7 @@ * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. * This will prevent position updates from being displayed. */ - #if ENABLED(U8GLIB_ST7920) + #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. //#define DOGM_SPI_DELAY_US 5 diff --git a/config/examples/Creality/Ender-3 Max/Configuration.h b/config/examples/Creality/Ender-3 Max/Configuration.h index 15bfbe7c26..1d18a8eccd 100644 --- a/config/examples/Creality/Ender-3 Max/Configuration.h +++ b/config/examples/Creality/Ender-3 Max/Configuration.h @@ -2381,6 +2381,11 @@ //#define VIKI2 //#define miniVIKI +// +// Alfawise Ex8 printer LCD marked as WYH L12864 COG +// +//#define WYH_L12864 + // // MakerLab Mini Panel with graphic // controller and SD support - https://reprap.org/wiki/Mini_panel diff --git a/config/examples/Creality/Ender-3 Max/Configuration_adv.h b/config/examples/Creality/Ender-3 Max/Configuration_adv.h index 8edd2e4790..d702c2e905 100644 --- a/config/examples/Creality/Ender-3 Max/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 Max/Configuration_adv.h @@ -1603,7 +1603,7 @@ * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. * This will prevent position updates from being displayed. */ - #if ENABLED(U8GLIB_ST7920) + #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. //#define DOGM_SPI_DELAY_US 5 diff --git a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR 1.4 Turbo/Configuration.h b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR 1.4 Turbo/Configuration.h index ae4ea75de1..4f701b4b3f 100644 --- a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR 1.4 Turbo/Configuration.h +++ b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR 1.4 Turbo/Configuration.h @@ -2376,6 +2376,11 @@ //#define VIKI2 //#define miniVIKI +// +// Alfawise Ex8 printer LCD marked as WYH L12864 COG +// +//#define WYH_L12864 + // // MakerLab Mini Panel with graphic // controller and SD support - https://reprap.org/wiki/Mini_panel diff --git a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR 1.4 Turbo/Configuration_adv.h b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR 1.4 Turbo/Configuration_adv.h index 585eddc717..87d1bf5179 100644 --- a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR 1.4 Turbo/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR 1.4 Turbo/Configuration_adv.h @@ -1603,7 +1603,7 @@ * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. * This will prevent position updates from being displayed. */ - #if ENABLED(U8GLIB_ST7920) + #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. //#define DOGM_SPI_DELAY_US 5 diff --git a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.0/Configuration.h b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.0/Configuration.h index 97e913c6ec..13acb2bdf5 100644 --- a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.0/Configuration.h +++ b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.0/Configuration.h @@ -2376,6 +2376,11 @@ //#define VIKI2 //#define miniVIKI +// +// Alfawise Ex8 printer LCD marked as WYH L12864 COG +// +//#define WYH_L12864 + // // MakerLab Mini Panel with graphic // controller and SD support - https://reprap.org/wiki/Mini_panel diff --git a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h index 578840d45e..52e8ceeabc 100644 --- a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h @@ -1603,7 +1603,7 @@ * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. * This will prevent position updates from being displayed. */ - #if ENABLED(U8GLIB_ST7920) + #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. //#define DOGM_SPI_DELAY_US 5 diff --git a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.2/Configuration.h b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.2/Configuration.h index 9de800d99c..e6d19f134a 100644 --- a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.2/Configuration.h +++ b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.2/Configuration.h @@ -2376,6 +2376,11 @@ //#define VIKI2 //#define miniVIKI +// +// Alfawise Ex8 printer LCD marked as WYH L12864 COG +// +//#define WYH_L12864 + // // MakerLab Mini Panel with graphic // controller and SD support - https://reprap.org/wiki/Mini_panel diff --git a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h index a758721da5..c85cfc2dc2 100644 --- a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h @@ -1603,7 +1603,7 @@ * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. * This will prevent position updates from being displayed. */ - #if ENABLED(U8GLIB_ST7920) + #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. //#define DOGM_SPI_DELAY_US 5 diff --git a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 2.0/Configuration.h b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 2.0/Configuration.h index 3bacaf12c2..a586b5ed6a 100644 --- a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 2.0/Configuration.h +++ b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 2.0/Configuration.h @@ -2376,6 +2376,11 @@ //#define VIKI2 //#define miniVIKI +// +// Alfawise Ex8 printer LCD marked as WYH L12864 COG +// +//#define WYH_L12864 + // // MakerLab Mini Panel with graphic // controller and SD support - https://reprap.org/wiki/Mini_panel diff --git a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h index 3540e0affd..ac725a188c 100644 --- a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h @@ -1603,7 +1603,7 @@ * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. * This will prevent position updates from being displayed. */ - #if ENABLED(U8GLIB_ST7920) + #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. //#define DOGM_SPI_DELAY_US 5 diff --git a/config/examples/Creality/Ender-3 Pro/CrealityV1/Configuration.h b/config/examples/Creality/Ender-3 Pro/CrealityV1/Configuration.h index 26cf8a0212..6c4d3209a4 100644 --- a/config/examples/Creality/Ender-3 Pro/CrealityV1/Configuration.h +++ b/config/examples/Creality/Ender-3 Pro/CrealityV1/Configuration.h @@ -2377,6 +2377,11 @@ //#define VIKI2 //#define miniVIKI +// +// Alfawise Ex8 printer LCD marked as WYH L12864 COG +// +//#define WYH_L12864 + // // MakerLab Mini Panel with graphic // controller and SD support - https://reprap.org/wiki/Mini_panel diff --git a/config/examples/Creality/Ender-3 Pro/CrealityV1/Configuration_adv.h b/config/examples/Creality/Ender-3 Pro/CrealityV1/Configuration_adv.h index 6a72cd0356..2a9a029615 100644 --- a/config/examples/Creality/Ender-3 Pro/CrealityV1/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 Pro/CrealityV1/Configuration_adv.h @@ -1603,7 +1603,7 @@ * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. * This will prevent position updates from being displayed. */ - #if ENABLED(U8GLIB_ST7920) + #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. //#define DOGM_SPI_DELAY_US 5 diff --git a/config/examples/Creality/Ender-3 Pro/CrealityV422/Configuration.h b/config/examples/Creality/Ender-3 Pro/CrealityV422/Configuration.h index 5aa0da2d07..777e459317 100644 --- a/config/examples/Creality/Ender-3 Pro/CrealityV422/Configuration.h +++ b/config/examples/Creality/Ender-3 Pro/CrealityV422/Configuration.h @@ -2380,6 +2380,11 @@ //#define VIKI2 //#define miniVIKI +// +// Alfawise Ex8 printer LCD marked as WYH L12864 COG +// +//#define WYH_L12864 + // // MakerLab Mini Panel with graphic // controller and SD support - https://reprap.org/wiki/Mini_panel diff --git a/config/examples/Creality/Ender-3 Pro/CrealityV422/Configuration_adv.h b/config/examples/Creality/Ender-3 Pro/CrealityV422/Configuration_adv.h index 061d488d7c..009f807050 100644 --- a/config/examples/Creality/Ender-3 Pro/CrealityV422/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 Pro/CrealityV422/Configuration_adv.h @@ -1604,7 +1604,7 @@ * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. * This will prevent position updates from being displayed. */ - #if ENABLED(U8GLIB_ST7920) + #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. //#define DOGM_SPI_DELAY_US 5 diff --git a/config/examples/Creality/Ender-3 Pro/CrealityV427/Configuration.h b/config/examples/Creality/Ender-3 Pro/CrealityV427/Configuration.h index f3057b408e..0517982867 100644 --- a/config/examples/Creality/Ender-3 Pro/CrealityV427/Configuration.h +++ b/config/examples/Creality/Ender-3 Pro/CrealityV427/Configuration.h @@ -2377,6 +2377,11 @@ //#define VIKI2 //#define miniVIKI +// +// Alfawise Ex8 printer LCD marked as WYH L12864 COG +// +//#define WYH_L12864 + // // MakerLab Mini Panel with graphic // controller and SD support - https://reprap.org/wiki/Mini_panel diff --git a/config/examples/Creality/Ender-3 Pro/CrealityV427/Configuration_adv.h b/config/examples/Creality/Ender-3 Pro/CrealityV427/Configuration_adv.h index 8b585b04c9..3b5daee972 100644 --- a/config/examples/Creality/Ender-3 Pro/CrealityV427/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 Pro/CrealityV427/Configuration_adv.h @@ -1603,7 +1603,7 @@ * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. * This will prevent position updates from being displayed. */ - #if ENABLED(U8GLIB_ST7920) + #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. //#define DOGM_SPI_DELAY_US 5 diff --git a/config/examples/Creality/Ender-3 V2/CrealityUI/Configuration.h b/config/examples/Creality/Ender-3 V2/CrealityUI/Configuration.h index c57d3dcaa8..dd490830f8 100644 --- a/config/examples/Creality/Ender-3 V2/CrealityUI/Configuration.h +++ b/config/examples/Creality/Ender-3 V2/CrealityUI/Configuration.h @@ -2376,6 +2376,11 @@ //#define VIKI2 //#define miniVIKI +// +// Alfawise Ex8 printer LCD marked as WYH L12864 COG +// +//#define WYH_L12864 + // // MakerLab Mini Panel with graphic // controller and SD support - https://reprap.org/wiki/Mini_panel diff --git a/config/examples/Creality/Ender-3 V2/CrealityUI/Configuration_adv.h b/config/examples/Creality/Ender-3 V2/CrealityUI/Configuration_adv.h index 7cd8b65dd5..206b9518df 100644 --- a/config/examples/Creality/Ender-3 V2/CrealityUI/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 V2/CrealityUI/Configuration_adv.h @@ -1604,7 +1604,7 @@ * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. * This will prevent position updates from being displayed. */ - #if ENABLED(U8GLIB_ST7920) + #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. //#define DOGM_SPI_DELAY_US 5 diff --git a/config/examples/Creality/Ender-3 V2/MarlinUI/Configuration.h b/config/examples/Creality/Ender-3 V2/MarlinUI/Configuration.h index ddec4ba9db..883ca6c14d 100644 --- a/config/examples/Creality/Ender-3 V2/MarlinUI/Configuration.h +++ b/config/examples/Creality/Ender-3 V2/MarlinUI/Configuration.h @@ -2376,6 +2376,11 @@ //#define VIKI2 //#define miniVIKI +// +// Alfawise Ex8 printer LCD marked as WYH L12864 COG +// +//#define WYH_L12864 + // // MakerLab Mini Panel with graphic // controller and SD support - https://reprap.org/wiki/Mini_panel diff --git a/config/examples/Creality/Ender-3 V2/MarlinUI/Configuration_adv.h b/config/examples/Creality/Ender-3 V2/MarlinUI/Configuration_adv.h index 8552c7b3d2..e6edccb44b 100644 --- a/config/examples/Creality/Ender-3 V2/MarlinUI/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 V2/MarlinUI/Configuration_adv.h @@ -1610,7 +1610,7 @@ * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. * This will prevent position updates from being displayed. */ - #if ENABLED(U8GLIB_ST7920) + #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. //#define DOGM_SPI_DELAY_US 5 diff --git a/config/examples/Creality/Ender-3/BigTreeTech E3 RRF/Configuration.h b/config/examples/Creality/Ender-3/BigTreeTech E3 RRF/Configuration.h index 1334f0ce9e..5e920e749b 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech E3 RRF/Configuration.h +++ b/config/examples/Creality/Ender-3/BigTreeTech E3 RRF/Configuration.h @@ -2375,6 +2375,11 @@ //#define VIKI2 //#define miniVIKI +// +// Alfawise Ex8 printer LCD marked as WYH L12864 COG +// +//#define WYH_L12864 + // // MakerLab Mini Panel with graphic // controller and SD support - https://reprap.org/wiki/Mini_panel diff --git a/config/examples/Creality/Ender-3/BigTreeTech E3 RRF/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech E3 RRF/Configuration_adv.h index 2d067be978..cb8ecef9fc 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech E3 RRF/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech E3 RRF/Configuration_adv.h @@ -1603,7 +1603,7 @@ * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. * This will prevent position updates from being displayed. */ - #if ENABLED(U8GLIB_ST7920) + #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. //#define DOGM_SPI_DELAY_US 5 diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR 1.4/Configuration.h b/config/examples/Creality/Ender-3/BigTreeTech SKR 1.4/Configuration.h index 9053a8c00a..129b3f1e11 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR 1.4/Configuration.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR 1.4/Configuration.h @@ -2377,6 +2377,11 @@ //#define VIKI2 //#define miniVIKI +// +// Alfawise Ex8 printer LCD marked as WYH L12864 COG +// +//#define WYH_L12864 + // // MakerLab Mini Panel with graphic // controller and SD support - https://reprap.org/wiki/Mini_panel diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR 1.4/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech SKR 1.4/Configuration_adv.h index ddd794cada..7279b38346 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR 1.4/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR 1.4/Configuration_adv.h @@ -1603,7 +1603,7 @@ * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. * This will prevent position updates from being displayed. */ - #if ENABLED(U8GLIB_ST7920) + #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. //#define DOGM_SPI_DELAY_US 5 diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/2-into-1 Hotend/Configuration.h b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/2-into-1 Hotend/Configuration.h index fbd3ceeb86..36a693dead 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/2-into-1 Hotend/Configuration.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/2-into-1 Hotend/Configuration.h @@ -2375,6 +2375,11 @@ //#define VIKI2 //#define miniVIKI +// +// Alfawise Ex8 printer LCD marked as WYH L12864 COG +// +//#define WYH_L12864 + // // MakerLab Mini Panel with graphic // controller and SD support - https://reprap.org/wiki/Mini_panel diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/2-into-1 Hotend/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/2-into-1 Hotend/Configuration_adv.h index 7f8c4b188d..bd63f5dcc7 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/2-into-1 Hotend/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/2-into-1 Hotend/Configuration_adv.h @@ -1603,7 +1603,7 @@ * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. * This will prevent position updates from being displayed. */ - #if ENABLED(U8GLIB_ST7920) + #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. //#define DOGM_SPI_DELAY_US 5 diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Dual Z/Configuration.h b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Dual Z/Configuration.h index 92fab7ede8..a262855a36 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Dual Z/Configuration.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Dual Z/Configuration.h @@ -2375,6 +2375,11 @@ //#define VIKI2 //#define miniVIKI +// +// Alfawise Ex8 printer LCD marked as WYH L12864 COG +// +//#define WYH_L12864 + // // MakerLab Mini Panel with graphic // controller and SD support - https://reprap.org/wiki/Mini_panel diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Dual Z/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Dual Z/Configuration_adv.h index 605ea0884d..65e8db8452 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Dual Z/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Dual Z/Configuration_adv.h @@ -1603,7 +1603,7 @@ * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. * This will prevent position updates from being displayed. */ - #if ENABLED(U8GLIB_ST7920) + #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. //#define DOGM_SPI_DELAY_US 5 diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Single Extruder/Configuration.h b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Single Extruder/Configuration.h index b7b9549a21..a3e9c1ab68 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Single Extruder/Configuration.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Single Extruder/Configuration.h @@ -2375,6 +2375,11 @@ //#define VIKI2 //#define miniVIKI +// +// Alfawise Ex8 printer LCD marked as WYH L12864 COG +// +//#define WYH_L12864 + // // MakerLab Mini Panel with graphic // controller and SD support - https://reprap.org/wiki/Mini_panel diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Single Extruder/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Single Extruder/Configuration_adv.h index 7f8c4b188d..bd63f5dcc7 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Single Extruder/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Single Extruder/Configuration_adv.h @@ -1603,7 +1603,7 @@ * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. * This will prevent position updates from being displayed. */ - #if ENABLED(U8GLIB_ST7920) + #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. //#define DOGM_SPI_DELAY_US 5 diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR E3-DIP V1.1/Configuration.h b/config/examples/Creality/Ender-3/BigTreeTech SKR E3-DIP V1.1/Configuration.h index 9d784c3874..9e19adfe7a 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR E3-DIP V1.1/Configuration.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR E3-DIP V1.1/Configuration.h @@ -2376,6 +2376,11 @@ //#define VIKI2 //#define miniVIKI +// +// Alfawise Ex8 printer LCD marked as WYH L12864 COG +// +//#define WYH_L12864 + // // MakerLab Mini Panel with graphic // controller and SD support - https://reprap.org/wiki/Mini_panel diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR E3-DIP V1.1/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech SKR E3-DIP V1.1/Configuration_adv.h index 093cee5f81..1a11178f03 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR E3-DIP V1.1/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR E3-DIP V1.1/Configuration_adv.h @@ -1603,7 +1603,7 @@ * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. * This will prevent position updates from being displayed. */ - #if ENABLED(U8GLIB_ST7920) + #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. //#define DOGM_SPI_DELAY_US 5 diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.0/Configuration.h b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.0/Configuration.h index 96372b7a7a..33d589c8ca 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.0/Configuration.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.0/Configuration.h @@ -2375,6 +2375,11 @@ //#define VIKI2 //#define miniVIKI +// +// Alfawise Ex8 printer LCD marked as WYH L12864 COG +// +//#define WYH_L12864 + // // MakerLab Mini Panel with graphic // controller and SD support - https://reprap.org/wiki/Mini_panel diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h index 61f5945c5d..84885e6c8f 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h @@ -1603,7 +1603,7 @@ * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. * This will prevent position updates from being displayed. */ - #if ENABLED(U8GLIB_ST7920) + #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. //#define DOGM_SPI_DELAY_US 5 diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.2/Configuration.h b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.2/Configuration.h index 18e3577504..2c89354332 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.2/Configuration.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.2/Configuration.h @@ -2375,6 +2375,11 @@ //#define VIKI2 //#define miniVIKI +// +// Alfawise Ex8 printer LCD marked as WYH L12864 COG +// +//#define WYH_L12864 + // // MakerLab Mini Panel with graphic // controller and SD support - https://reprap.org/wiki/Mini_panel diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h index 65755247d0..c6b7c0a071 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h @@ -1603,7 +1603,7 @@ * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. * This will prevent position updates from being displayed. */ - #if ENABLED(U8GLIB_ST7920) + #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. //#define DOGM_SPI_DELAY_US 5 diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 2.0/Configuration.h b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 2.0/Configuration.h index cf841e1cf4..a8d88f3c81 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 2.0/Configuration.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 2.0/Configuration.h @@ -2375,6 +2375,11 @@ //#define VIKI2 //#define miniVIKI +// +// Alfawise Ex8 printer LCD marked as WYH L12864 COG +// +//#define WYH_L12864 + // // MakerLab Mini Panel with graphic // controller and SD support - https://reprap.org/wiki/Mini_panel diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h index e2a781aa62..0a67660d99 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h @@ -1603,7 +1603,7 @@ * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. * This will prevent position updates from being displayed. */ - #if ENABLED(U8GLIB_ST7920) + #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. //#define DOGM_SPI_DELAY_US 5 diff --git a/config/examples/Creality/Ender-3/CrealityV1/Configuration.h b/config/examples/Creality/Ender-3/CrealityV1/Configuration.h index 6698601f73..cb6e113277 100644 --- a/config/examples/Creality/Ender-3/CrealityV1/Configuration.h +++ b/config/examples/Creality/Ender-3/CrealityV1/Configuration.h @@ -2377,6 +2377,11 @@ //#define VIKI2 //#define miniVIKI +// +// Alfawise Ex8 printer LCD marked as WYH L12864 COG +// +//#define WYH_L12864 + // // MakerLab Mini Panel with graphic // controller and SD support - https://reprap.org/wiki/Mini_panel diff --git a/config/examples/Creality/Ender-3/CrealityV1/Configuration_adv.h b/config/examples/Creality/Ender-3/CrealityV1/Configuration_adv.h index 0ea3cc45ff..606de2e1e4 100644 --- a/config/examples/Creality/Ender-3/CrealityV1/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/CrealityV1/Configuration_adv.h @@ -1603,7 +1603,7 @@ * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. * This will prevent position updates from being displayed. */ - #if ENABLED(U8GLIB_ST7920) + #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. //#define DOGM_SPI_DELAY_US 5 diff --git a/config/examples/Creality/Ender-3/CrealityV422/Configuration.h b/config/examples/Creality/Ender-3/CrealityV422/Configuration.h index 3ca447a8ff..ab65faedfe 100644 --- a/config/examples/Creality/Ender-3/CrealityV422/Configuration.h +++ b/config/examples/Creality/Ender-3/CrealityV422/Configuration.h @@ -2383,6 +2383,11 @@ //#define VIKI2 //#define miniVIKI +// +// Alfawise Ex8 printer LCD marked as WYH L12864 COG +// +//#define WYH_L12864 + // // MakerLab Mini Panel with graphic // controller and SD support - https://reprap.org/wiki/Mini_panel diff --git a/config/examples/Creality/Ender-3/CrealityV422/Configuration_adv.h b/config/examples/Creality/Ender-3/CrealityV422/Configuration_adv.h index 0ea3cc45ff..606de2e1e4 100644 --- a/config/examples/Creality/Ender-3/CrealityV422/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/CrealityV422/Configuration_adv.h @@ -1603,7 +1603,7 @@ * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. * This will prevent position updates from being displayed. */ - #if ENABLED(U8GLIB_ST7920) + #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. //#define DOGM_SPI_DELAY_US 5 diff --git a/config/examples/Creality/Ender-3/CrealityV427/Configuration.h b/config/examples/Creality/Ender-3/CrealityV427/Configuration.h index e0a12c1b46..05d7b25ddf 100644 --- a/config/examples/Creality/Ender-3/CrealityV427/Configuration.h +++ b/config/examples/Creality/Ender-3/CrealityV427/Configuration.h @@ -2377,6 +2377,11 @@ //#define VIKI2 //#define miniVIKI +// +// Alfawise Ex8 printer LCD marked as WYH L12864 COG +// +//#define WYH_L12864 + // // MakerLab Mini Panel with graphic // controller and SD support - https://reprap.org/wiki/Mini_panel diff --git a/config/examples/Creality/Ender-3/CrealityV427/Configuration_adv.h b/config/examples/Creality/Ender-3/CrealityV427/Configuration_adv.h index 6bb16aa14b..5d5c6c2405 100644 --- a/config/examples/Creality/Ender-3/CrealityV427/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/CrealityV427/Configuration_adv.h @@ -1603,7 +1603,7 @@ * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. * This will prevent position updates from being displayed. */ - #if ENABLED(U8GLIB_ST7920) + #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. //#define DOGM_SPI_DELAY_US 5 diff --git a/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/BLTouch/Configuration.h b/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/BLTouch/Configuration.h index ef3d5c6635..d9b0fb6e14 100644 --- a/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/BLTouch/Configuration.h +++ b/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/BLTouch/Configuration.h @@ -2377,6 +2377,11 @@ //#define VIKI2 //#define miniVIKI +// +// Alfawise Ex8 printer LCD marked as WYH L12864 COG +// +//#define WYH_L12864 + // // MakerLab Mini Panel with graphic // controller and SD support - https://reprap.org/wiki/Mini_panel diff --git a/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/BLTouch/Configuration_adv.h b/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/BLTouch/Configuration_adv.h index 8e8c8c2837..9a77e7652e 100644 --- a/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/BLTouch/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/BLTouch/Configuration_adv.h @@ -1603,7 +1603,7 @@ * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. * This will prevent position updates from being displayed. */ - #if ENABLED(U8GLIB_ST7920) + #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. //#define DOGM_SPI_DELAY_US 5 diff --git a/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/base/Configuration.h b/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/base/Configuration.h index 055237e852..737ecd6d48 100644 --- a/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/base/Configuration.h +++ b/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/base/Configuration.h @@ -2377,6 +2377,11 @@ //#define VIKI2 //#define miniVIKI +// +// Alfawise Ex8 printer LCD marked as WYH L12864 COG +// +//#define WYH_L12864 + // // MakerLab Mini Panel with graphic // controller and SD support - https://reprap.org/wiki/Mini_panel diff --git a/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/base/Configuration_adv.h b/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/base/Configuration_adv.h index 8e8c8c2837..9a77e7652e 100644 --- a/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/base/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/base/Configuration_adv.h @@ -1603,7 +1603,7 @@ * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. * This will prevent position updates from being displayed. */ - #if ENABLED(U8GLIB_ST7920) + #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. //#define DOGM_SPI_DELAY_US 5 diff --git a/config/examples/Creality/Ender-3/FYSETC Cheetah/BLTouch/Configuration.h b/config/examples/Creality/Ender-3/FYSETC Cheetah/BLTouch/Configuration.h index 8d2a7e8c0b..671afc37c0 100644 --- a/config/examples/Creality/Ender-3/FYSETC Cheetah/BLTouch/Configuration.h +++ b/config/examples/Creality/Ender-3/FYSETC Cheetah/BLTouch/Configuration.h @@ -2377,6 +2377,11 @@ //#define VIKI2 //#define miniVIKI +// +// Alfawise Ex8 printer LCD marked as WYH L12864 COG +// +//#define WYH_L12864 + // // MakerLab Mini Panel with graphic // controller and SD support - https://reprap.org/wiki/Mini_panel diff --git a/config/examples/Creality/Ender-3/FYSETC Cheetah/BLTouch/Configuration_adv.h b/config/examples/Creality/Ender-3/FYSETC Cheetah/BLTouch/Configuration_adv.h index 8e8c8c2837..9a77e7652e 100644 --- a/config/examples/Creality/Ender-3/FYSETC Cheetah/BLTouch/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/FYSETC Cheetah/BLTouch/Configuration_adv.h @@ -1603,7 +1603,7 @@ * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. * This will prevent position updates from being displayed. */ - #if ENABLED(U8GLIB_ST7920) + #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. //#define DOGM_SPI_DELAY_US 5 diff --git a/config/examples/Creality/Ender-3/FYSETC Cheetah/base/Configuration.h b/config/examples/Creality/Ender-3/FYSETC Cheetah/base/Configuration.h index 82ba731a50..ccb07e3425 100644 --- a/config/examples/Creality/Ender-3/FYSETC Cheetah/base/Configuration.h +++ b/config/examples/Creality/Ender-3/FYSETC Cheetah/base/Configuration.h @@ -2377,6 +2377,11 @@ //#define VIKI2 //#define miniVIKI +// +// Alfawise Ex8 printer LCD marked as WYH L12864 COG +// +//#define WYH_L12864 + // // MakerLab Mini Panel with graphic // controller and SD support - https://reprap.org/wiki/Mini_panel diff --git a/config/examples/Creality/Ender-3/FYSETC Cheetah/base/Configuration_adv.h b/config/examples/Creality/Ender-3/FYSETC Cheetah/base/Configuration_adv.h index 8e8c8c2837..9a77e7652e 100644 --- a/config/examples/Creality/Ender-3/FYSETC Cheetah/base/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/FYSETC Cheetah/base/Configuration_adv.h @@ -1603,7 +1603,7 @@ * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. * This will prevent position updates from being displayed. */ - #if ENABLED(U8GLIB_ST7920) + #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. //#define DOGM_SPI_DELAY_US 5 diff --git a/config/examples/Creality/Ender-3/MEEB-3DP/Configuration.h b/config/examples/Creality/Ender-3/MEEB-3DP/Configuration.h index 09b86b32cb..3136240f65 100644 --- a/config/examples/Creality/Ender-3/MEEB-3DP/Configuration.h +++ b/config/examples/Creality/Ender-3/MEEB-3DP/Configuration.h @@ -2382,6 +2382,11 @@ //#define VIKI2 //#define miniVIKI +// +// Alfawise Ex8 printer LCD marked as WYH L12864 COG +// +//#define WYH_L12864 + // // MakerLab Mini Panel with graphic // controller and SD support - https://reprap.org/wiki/Mini_panel diff --git a/config/examples/Creality/Ender-3/MEEB-3DP/Configuration_adv.h b/config/examples/Creality/Ender-3/MEEB-3DP/Configuration_adv.h index 8b4439e0d7..8f31c138fc 100644 --- a/config/examples/Creality/Ender-3/MEEB-3DP/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/MEEB-3DP/Configuration_adv.h @@ -1603,7 +1603,7 @@ * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. * This will prevent position updates from being displayed. */ - #if ENABLED(U8GLIB_ST7920) + #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. //#define DOGM_SPI_DELAY_US 5 diff --git a/config/examples/Creality/Ender-3/MKS Robin E3/V1.0/Configuration.h b/config/examples/Creality/Ender-3/MKS Robin E3/V1.0/Configuration.h index 39bca209ff..b88277de4e 100644 --- a/config/examples/Creality/Ender-3/MKS Robin E3/V1.0/Configuration.h +++ b/config/examples/Creality/Ender-3/MKS Robin E3/V1.0/Configuration.h @@ -2375,6 +2375,11 @@ //#define VIKI2 //#define miniVIKI +// +// Alfawise Ex8 printer LCD marked as WYH L12864 COG +// +//#define WYH_L12864 + // // MakerLab Mini Panel with graphic // controller and SD support - https://reprap.org/wiki/Mini_panel diff --git a/config/examples/Creality/Ender-3/MKS Robin E3/V1.0/Configuration_adv.h b/config/examples/Creality/Ender-3/MKS Robin E3/V1.0/Configuration_adv.h index e7acf8b7a0..696e236e90 100644 --- a/config/examples/Creality/Ender-3/MKS Robin E3/V1.0/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/MKS Robin E3/V1.0/Configuration_adv.h @@ -1603,7 +1603,7 @@ * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. * This will prevent position updates from being displayed. */ - #if ENABLED(U8GLIB_ST7920) + #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. //#define DOGM_SPI_DELAY_US 5 diff --git a/config/examples/Creality/Ender-3/MKS Robin E3/V1.1/Configuration.h b/config/examples/Creality/Ender-3/MKS Robin E3/V1.1/Configuration.h index 626909aed5..62f45e2f84 100644 --- a/config/examples/Creality/Ender-3/MKS Robin E3/V1.1/Configuration.h +++ b/config/examples/Creality/Ender-3/MKS Robin E3/V1.1/Configuration.h @@ -2375,6 +2375,11 @@ //#define VIKI2 //#define miniVIKI +// +// Alfawise Ex8 printer LCD marked as WYH L12864 COG +// +//#define WYH_L12864 + // // MakerLab Mini Panel with graphic // controller and SD support - https://reprap.org/wiki/Mini_panel diff --git a/config/examples/Creality/Ender-3/MKS Robin E3/V1.1/Configuration_adv.h b/config/examples/Creality/Ender-3/MKS Robin E3/V1.1/Configuration_adv.h index 5b494535da..e16da16b3e 100644 --- a/config/examples/Creality/Ender-3/MKS Robin E3/V1.1/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/MKS Robin E3/V1.1/Configuration_adv.h @@ -1603,7 +1603,7 @@ * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. * This will prevent position updates from being displayed. */ - #if ENABLED(U8GLIB_ST7920) + #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. //#define DOGM_SPI_DELAY_US 5 diff --git a/config/examples/Creality/Ender-3/MKS Robin E3P/Configuration.h b/config/examples/Creality/Ender-3/MKS Robin E3P/Configuration.h index b04785cb71..bff900bee1 100644 --- a/config/examples/Creality/Ender-3/MKS Robin E3P/Configuration.h +++ b/config/examples/Creality/Ender-3/MKS Robin E3P/Configuration.h @@ -2377,6 +2377,11 @@ //#define VIKI2 //#define miniVIKI +// +// Alfawise Ex8 printer LCD marked as WYH L12864 COG +// +//#define WYH_L12864 + // // MakerLab Mini Panel with graphic // controller and SD support - https://reprap.org/wiki/Mini_panel diff --git a/config/examples/Creality/Ender-3/MKS Robin E3P/Configuration_adv.h b/config/examples/Creality/Ender-3/MKS Robin E3P/Configuration_adv.h index 35bc090fc6..a75fa97719 100644 --- a/config/examples/Creality/Ender-3/MKS Robin E3P/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/MKS Robin E3P/Configuration_adv.h @@ -1603,7 +1603,7 @@ * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. * This will prevent position updates from being displayed. */ - #if ENABLED(U8GLIB_ST7920) + #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. //#define DOGM_SPI_DELAY_US 5 diff --git a/config/examples/Creality/Ender-3/TH3D EZBoard Lite V2/Configuration.h b/config/examples/Creality/Ender-3/TH3D EZBoard Lite V2/Configuration.h index 4b124dae73..83da0b5b43 100644 --- a/config/examples/Creality/Ender-3/TH3D EZBoard Lite V2/Configuration.h +++ b/config/examples/Creality/Ender-3/TH3D EZBoard Lite V2/Configuration.h @@ -2377,6 +2377,11 @@ //#define VIKI2 //#define miniVIKI +// +// Alfawise Ex8 printer LCD marked as WYH L12864 COG +// +//#define WYH_L12864 + // // MakerLab Mini Panel with graphic // controller and SD support - https://reprap.org/wiki/Mini_panel diff --git a/config/examples/Creality/Ender-3/TH3D EZBoard Lite V2/Configuration_adv.h b/config/examples/Creality/Ender-3/TH3D EZBoard Lite V2/Configuration_adv.h index 1aef9e0cd1..5f6323ec24 100644 --- a/config/examples/Creality/Ender-3/TH3D EZBoard Lite V2/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/TH3D EZBoard Lite V2/Configuration_adv.h @@ -1603,7 +1603,7 @@ * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. * This will prevent position updates from being displayed. */ - #if ENABLED(U8GLIB_ST7920) + #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. //#define DOGM_SPI_DELAY_US 5 diff --git a/config/examples/Creality/Ender-4/Configuration.h b/config/examples/Creality/Ender-4/Configuration.h index e5f97f2e84..1733907d73 100644 --- a/config/examples/Creality/Ender-4/Configuration.h +++ b/config/examples/Creality/Ender-4/Configuration.h @@ -2376,6 +2376,11 @@ //#define VIKI2 //#define miniVIKI +// +// Alfawise Ex8 printer LCD marked as WYH L12864 COG +// +//#define WYH_L12864 + // // MakerLab Mini Panel with graphic // controller and SD support - https://reprap.org/wiki/Mini_panel diff --git a/config/examples/Creality/Ender-4/Configuration_adv.h b/config/examples/Creality/Ender-4/Configuration_adv.h index dbd316ea78..a5db30ffc7 100644 --- a/config/examples/Creality/Ender-4/Configuration_adv.h +++ b/config/examples/Creality/Ender-4/Configuration_adv.h @@ -1603,7 +1603,7 @@ * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. * This will prevent position updates from being displayed. */ - #if ENABLED(U8GLIB_ST7920) + #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. //#define DOGM_SPI_DELAY_US 5 diff --git a/config/examples/Creality/Ender-5 Plus/Configuration.h b/config/examples/Creality/Ender-5 Plus/Configuration.h index a33dcfff33..7b2622a4c8 100644 --- a/config/examples/Creality/Ender-5 Plus/Configuration.h +++ b/config/examples/Creality/Ender-5 Plus/Configuration.h @@ -2385,6 +2385,11 @@ //#define VIKI2 //#define miniVIKI +// +// Alfawise Ex8 printer LCD marked as WYH L12864 COG +// +//#define WYH_L12864 + // // MakerLab Mini Panel with graphic // controller and SD support - https://reprap.org/wiki/Mini_panel diff --git a/config/examples/Creality/Ender-5 Plus/Configuration_adv.h b/config/examples/Creality/Ender-5 Plus/Configuration_adv.h index 634bc282ec..2b4dc5ee6b 100644 --- a/config/examples/Creality/Ender-5 Plus/Configuration_adv.h +++ b/config/examples/Creality/Ender-5 Plus/Configuration_adv.h @@ -1603,7 +1603,7 @@ * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. * This will prevent position updates from being displayed. */ - #if ENABLED(U8GLIB_ST7920) + #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. //#define DOGM_SPI_DELAY_US 5 diff --git a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR E3 Turbo with BLTouch/Configuration.h b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR E3 Turbo with BLTouch/Configuration.h index 7dce2ac32d..d2eb7ec0e2 100644 --- a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR E3 Turbo with BLTouch/Configuration.h +++ b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR E3 Turbo with BLTouch/Configuration.h @@ -2377,6 +2377,11 @@ //#define VIKI2 //#define miniVIKI +// +// Alfawise Ex8 printer LCD marked as WYH L12864 COG +// +//#define WYH_L12864 + // // MakerLab Mini Panel with graphic // controller and SD support - https://reprap.org/wiki/Mini_panel diff --git a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR E3 Turbo with BLTouch/Configuration_adv.h b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR E3 Turbo with BLTouch/Configuration_adv.h index 733c55a1a8..3bf6f2073a 100644 --- a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR E3 Turbo with BLTouch/Configuration_adv.h +++ b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR E3 Turbo with BLTouch/Configuration_adv.h @@ -1603,7 +1603,7 @@ * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. * This will prevent position updates from being displayed. */ - #if ENABLED(U8GLIB_ST7920) + #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. //#define DOGM_SPI_DELAY_US 5 diff --git a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR E3 Turbo/Configuration.h b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR E3 Turbo/Configuration.h index 208831adfc..3fde5ba1d5 100644 --- a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR E3 Turbo/Configuration.h +++ b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR E3 Turbo/Configuration.h @@ -2377,6 +2377,11 @@ //#define VIKI2 //#define miniVIKI +// +// Alfawise Ex8 printer LCD marked as WYH L12864 COG +// +//#define WYH_L12864 + // // MakerLab Mini Panel with graphic // controller and SD support - https://reprap.org/wiki/Mini_panel diff --git a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR E3 Turbo/Configuration_adv.h b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR E3 Turbo/Configuration_adv.h index e16886ee49..5a9b6a69fa 100644 --- a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR E3 Turbo/Configuration_adv.h +++ b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR E3 Turbo/Configuration_adv.h @@ -1603,7 +1603,7 @@ * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. * This will prevent position updates from being displayed. */ - #if ENABLED(U8GLIB_ST7920) + #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. //#define DOGM_SPI_DELAY_US 5 diff --git a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 1.2/Configuration.h b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 1.2/Configuration.h index 2d437df5d5..b255248d77 100644 --- a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 1.2/Configuration.h +++ b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 1.2/Configuration.h @@ -2347,6 +2347,11 @@ //#define VIKI2 //#define miniVIKI +// +// Alfawise Ex8 printer LCD marked as WYH L12864 COG +// +//#define WYH_L12864 + // // MakerLab Mini Panel with graphic // controller and SD support - https://reprap.org/wiki/Mini_panel diff --git a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h index afa9b80699..d6fad2c746 100644 --- a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h +++ b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h @@ -1603,7 +1603,7 @@ * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. * This will prevent position updates from being displayed. */ - #if ENABLED(U8GLIB_ST7920) + #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. //#define DOGM_SPI_DELAY_US 5 diff --git a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 2.0 with BLTouch/Configuration.h b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 2.0 with BLTouch/Configuration.h index 2b5e4db34f..166607d2f4 100644 --- a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 2.0 with BLTouch/Configuration.h +++ b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 2.0 with BLTouch/Configuration.h @@ -2377,6 +2377,11 @@ //#define VIKI2 //#define miniVIKI +// +// Alfawise Ex8 printer LCD marked as WYH L12864 COG +// +//#define WYH_L12864 + // // MakerLab Mini Panel with graphic // controller and SD support - https://reprap.org/wiki/Mini_panel diff --git a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 2.0 with BLTouch/Configuration_adv.h b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 2.0 with BLTouch/Configuration_adv.h index e21a6f0467..a56c6bafe2 100644 --- a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 2.0 with BLTouch/Configuration_adv.h +++ b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 2.0 with BLTouch/Configuration_adv.h @@ -1603,7 +1603,7 @@ * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. * This will prevent position updates from being displayed. */ - #if ENABLED(U8GLIB_ST7920) + #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. //#define DOGM_SPI_DELAY_US 5 diff --git a/config/examples/Creality/Ender-5 Pro/CrealityV1/Configuration.h b/config/examples/Creality/Ender-5 Pro/CrealityV1/Configuration.h index 37aeda9989..92ee0777c8 100644 --- a/config/examples/Creality/Ender-5 Pro/CrealityV1/Configuration.h +++ b/config/examples/Creality/Ender-5 Pro/CrealityV1/Configuration.h @@ -2377,6 +2377,11 @@ //#define VIKI2 //#define miniVIKI +// +// Alfawise Ex8 printer LCD marked as WYH L12864 COG +// +//#define WYH_L12864 + // // MakerLab Mini Panel with graphic // controller and SD support - https://reprap.org/wiki/Mini_panel diff --git a/config/examples/Creality/Ender-5 Pro/CrealityV1/Configuration_adv.h b/config/examples/Creality/Ender-5 Pro/CrealityV1/Configuration_adv.h index 45bcf43a77..766ab54157 100644 --- a/config/examples/Creality/Ender-5 Pro/CrealityV1/Configuration_adv.h +++ b/config/examples/Creality/Ender-5 Pro/CrealityV1/Configuration_adv.h @@ -1603,7 +1603,7 @@ * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. * This will prevent position updates from being displayed. */ - #if ENABLED(U8GLIB_ST7920) + #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. //#define DOGM_SPI_DELAY_US 5 diff --git a/config/examples/Creality/Ender-5 Pro/CrealityV422/Configuration.h b/config/examples/Creality/Ender-5 Pro/CrealityV422/Configuration.h index 3f298a20cf..d7e51c9eb6 100644 --- a/config/examples/Creality/Ender-5 Pro/CrealityV422/Configuration.h +++ b/config/examples/Creality/Ender-5 Pro/CrealityV422/Configuration.h @@ -2377,6 +2377,11 @@ //#define VIKI2 //#define miniVIKI +// +// Alfawise Ex8 printer LCD marked as WYH L12864 COG +// +//#define WYH_L12864 + // // MakerLab Mini Panel with graphic // controller and SD support - https://reprap.org/wiki/Mini_panel diff --git a/config/examples/Creality/Ender-5 Pro/CrealityV422/Configuration_adv.h b/config/examples/Creality/Ender-5 Pro/CrealityV422/Configuration_adv.h index ae831641da..006631e3c2 100644 --- a/config/examples/Creality/Ender-5 Pro/CrealityV422/Configuration_adv.h +++ b/config/examples/Creality/Ender-5 Pro/CrealityV422/Configuration_adv.h @@ -1603,7 +1603,7 @@ * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. * This will prevent position updates from being displayed. */ - #if ENABLED(U8GLIB_ST7920) + #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. //#define DOGM_SPI_DELAY_US 5 diff --git a/config/examples/Creality/Ender-5 Pro/CrealityV427/Configuration.h b/config/examples/Creality/Ender-5 Pro/CrealityV427/Configuration.h index 7ed0ac1876..1779266094 100644 --- a/config/examples/Creality/Ender-5 Pro/CrealityV427/Configuration.h +++ b/config/examples/Creality/Ender-5 Pro/CrealityV427/Configuration.h @@ -2377,6 +2377,11 @@ //#define VIKI2 //#define miniVIKI +// +// Alfawise Ex8 printer LCD marked as WYH L12864 COG +// +//#define WYH_L12864 + // // MakerLab Mini Panel with graphic // controller and SD support - https://reprap.org/wiki/Mini_panel diff --git a/config/examples/Creality/Ender-5 Pro/CrealityV427/Configuration_adv.h b/config/examples/Creality/Ender-5 Pro/CrealityV427/Configuration_adv.h index 45bcf43a77..766ab54157 100644 --- a/config/examples/Creality/Ender-5 Pro/CrealityV427/Configuration_adv.h +++ b/config/examples/Creality/Ender-5 Pro/CrealityV427/Configuration_adv.h @@ -1603,7 +1603,7 @@ * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. * This will prevent position updates from being displayed. */ - #if ENABLED(U8GLIB_ST7920) + #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. //#define DOGM_SPI_DELAY_US 5 diff --git a/config/examples/Creality/Ender-5/BigTreeTech SKR 1.4 Turbo (TMC2209)/Configuration.h b/config/examples/Creality/Ender-5/BigTreeTech SKR 1.4 Turbo (TMC2209)/Configuration.h index 730ad03aa6..e6e702995d 100644 --- a/config/examples/Creality/Ender-5/BigTreeTech SKR 1.4 Turbo (TMC2209)/Configuration.h +++ b/config/examples/Creality/Ender-5/BigTreeTech SKR 1.4 Turbo (TMC2209)/Configuration.h @@ -2406,6 +2406,11 @@ //#define VIKI2 //#define miniVIKI +// +// Alfawise Ex8 printer LCD marked as WYH L12864 COG +// +//#define WYH_L12864 + // // MakerLab Mini Panel with graphic // controller and SD support - https://reprap.org/wiki/Mini_panel diff --git a/config/examples/Creality/Ender-5/BigTreeTech SKR 1.4 Turbo (TMC2209)/Configuration_adv.h b/config/examples/Creality/Ender-5/BigTreeTech SKR 1.4 Turbo (TMC2209)/Configuration_adv.h index 58c904e8d1..741362b489 100644 --- a/config/examples/Creality/Ender-5/BigTreeTech SKR 1.4 Turbo (TMC2209)/Configuration_adv.h +++ b/config/examples/Creality/Ender-5/BigTreeTech SKR 1.4 Turbo (TMC2209)/Configuration_adv.h @@ -1607,7 +1607,7 @@ * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. * This will prevent position updates from being displayed. */ - #if ENABLED(U8GLIB_ST7920) + #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. //#define DOGM_SPI_DELAY_US 5 diff --git a/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo with BLTouch/Configuration.h b/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo with BLTouch/Configuration.h index 97067c79b2..471dacfa12 100644 --- a/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo with BLTouch/Configuration.h +++ b/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo with BLTouch/Configuration.h @@ -2377,6 +2377,11 @@ //#define VIKI2 //#define miniVIKI +// +// Alfawise Ex8 printer LCD marked as WYH L12864 COG +// +//#define WYH_L12864 + // // MakerLab Mini Panel with graphic // controller and SD support - https://reprap.org/wiki/Mini_panel diff --git a/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo with BLTouch/Configuration_adv.h b/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo with BLTouch/Configuration_adv.h index 733c55a1a8..3bf6f2073a 100644 --- a/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo with BLTouch/Configuration_adv.h +++ b/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo with BLTouch/Configuration_adv.h @@ -1603,7 +1603,7 @@ * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. * This will prevent position updates from being displayed. */ - #if ENABLED(U8GLIB_ST7920) + #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. //#define DOGM_SPI_DELAY_US 5 diff --git a/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo/Configuration.h b/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo/Configuration.h index 56b6cc0d3e..36562c4894 100644 --- a/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo/Configuration.h +++ b/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo/Configuration.h @@ -2377,6 +2377,11 @@ //#define VIKI2 //#define miniVIKI +// +// Alfawise Ex8 printer LCD marked as WYH L12864 COG +// +//#define WYH_L12864 + // // MakerLab Mini Panel with graphic // controller and SD support - https://reprap.org/wiki/Mini_panel diff --git a/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo/Configuration_adv.h b/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo/Configuration_adv.h index e16886ee49..5a9b6a69fa 100644 --- a/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo/Configuration_adv.h +++ b/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo/Configuration_adv.h @@ -1603,7 +1603,7 @@ * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. * This will prevent position updates from being displayed. */ - #if ENABLED(U8GLIB_ST7920) + #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. //#define DOGM_SPI_DELAY_US 5 diff --git a/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 1.2/Configuration.h b/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 1.2/Configuration.h index bcf211d158..36cea07d85 100644 --- a/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 1.2/Configuration.h +++ b/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 1.2/Configuration.h @@ -2375,6 +2375,11 @@ //#define VIKI2 //#define miniVIKI +// +// Alfawise Ex8 printer LCD marked as WYH L12864 COG +// +//#define WYH_L12864 + // // MakerLab Mini Panel with graphic // controller and SD support - https://reprap.org/wiki/Mini_panel diff --git a/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h b/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h index 65755247d0..c6b7c0a071 100644 --- a/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h +++ b/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h @@ -1603,7 +1603,7 @@ * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. * This will prevent position updates from being displayed. */ - #if ENABLED(U8GLIB_ST7920) + #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. //#define DOGM_SPI_DELAY_US 5 diff --git a/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 2.0/Configuration.h b/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 2.0/Configuration.h index 32e420f0fd..9f7b7a2eaf 100644 --- a/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 2.0/Configuration.h +++ b/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 2.0/Configuration.h @@ -2375,6 +2375,11 @@ //#define VIKI2 //#define miniVIKI +// +// Alfawise Ex8 printer LCD marked as WYH L12864 COG +// +//#define WYH_L12864 + // // MakerLab Mini Panel with graphic // controller and SD support - https://reprap.org/wiki/Mini_panel diff --git a/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h b/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h index c7b2f9537e..20de1c8689 100644 --- a/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h +++ b/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h @@ -1603,7 +1603,7 @@ * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. * This will prevent position updates from being displayed. */ - #if ENABLED(U8GLIB_ST7920) + #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. //#define DOGM_SPI_DELAY_US 5 diff --git a/config/examples/Creality/Ender-5/CrealityV1/Configuration.h b/config/examples/Creality/Ender-5/CrealityV1/Configuration.h index 8ac4456a00..3323ad1716 100644 --- a/config/examples/Creality/Ender-5/CrealityV1/Configuration.h +++ b/config/examples/Creality/Ender-5/CrealityV1/Configuration.h @@ -2377,6 +2377,11 @@ //#define VIKI2 //#define miniVIKI +// +// Alfawise Ex8 printer LCD marked as WYH L12864 COG +// +//#define WYH_L12864 + // // MakerLab Mini Panel with graphic // controller and SD support - https://reprap.org/wiki/Mini_panel diff --git a/config/examples/Creality/Ender-5/CrealityV1/Configuration_adv.h b/config/examples/Creality/Ender-5/CrealityV1/Configuration_adv.h index 0285b48377..cb9d8d9484 100644 --- a/config/examples/Creality/Ender-5/CrealityV1/Configuration_adv.h +++ b/config/examples/Creality/Ender-5/CrealityV1/Configuration_adv.h @@ -1603,7 +1603,7 @@ * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. * This will prevent position updates from being displayed. */ - #if ENABLED(U8GLIB_ST7920) + #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. //#define DOGM_SPI_DELAY_US 5 diff --git a/config/examples/Creality/Ender-5/CrealityV427/Configuration.h b/config/examples/Creality/Ender-5/CrealityV427/Configuration.h index dad7c494a5..7dd93ed29f 100644 --- a/config/examples/Creality/Ender-5/CrealityV427/Configuration.h +++ b/config/examples/Creality/Ender-5/CrealityV427/Configuration.h @@ -2377,6 +2377,11 @@ //#define VIKI2 //#define miniVIKI +// +// Alfawise Ex8 printer LCD marked as WYH L12864 COG +// +//#define WYH_L12864 + // // MakerLab Mini Panel with graphic // controller and SD support - https://reprap.org/wiki/Mini_panel diff --git a/config/examples/Creality/Ender-5/CrealityV427/Configuration_adv.h b/config/examples/Creality/Ender-5/CrealityV427/Configuration_adv.h index 0285b48377..cb9d8d9484 100644 --- a/config/examples/Creality/Ender-5/CrealityV427/Configuration_adv.h +++ b/config/examples/Creality/Ender-5/CrealityV427/Configuration_adv.h @@ -1603,7 +1603,7 @@ * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. * This will prevent position updates from being displayed. */ - #if ENABLED(U8GLIB_ST7920) + #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. //#define DOGM_SPI_DELAY_US 5 diff --git a/config/examples/Creality/Ender-6/Configuration.h b/config/examples/Creality/Ender-6/Configuration.h index 015e409380..3228f25612 100644 --- a/config/examples/Creality/Ender-6/Configuration.h +++ b/config/examples/Creality/Ender-6/Configuration.h @@ -2387,6 +2387,11 @@ //#define VIKI2 //#define miniVIKI +// +// Alfawise Ex8 printer LCD marked as WYH L12864 COG +// +//#define WYH_L12864 + // // MakerLab Mini Panel with graphic // controller and SD support - https://reprap.org/wiki/Mini_panel diff --git a/config/examples/Creality/Ender-6/Configuration_adv.h b/config/examples/Creality/Ender-6/Configuration_adv.h index 0fe56f6cb3..5bb404a770 100644 --- a/config/examples/Creality/Ender-6/Configuration_adv.h +++ b/config/examples/Creality/Ender-6/Configuration_adv.h @@ -1603,7 +1603,7 @@ * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. * This will prevent position updates from being displayed. */ - #if ENABLED(U8GLIB_ST7920) + #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. //#define DOGM_SPI_DELAY_US 5 diff --git a/config/examples/Dagoma/Disco Ultimate/Configuration.h b/config/examples/Dagoma/Disco Ultimate/Configuration.h index 2291da708e..562645c3c4 100644 --- a/config/examples/Dagoma/Disco Ultimate/Configuration.h +++ b/config/examples/Dagoma/Disco Ultimate/Configuration.h @@ -2376,6 +2376,11 @@ //#define VIKI2 //#define miniVIKI +// +// Alfawise Ex8 printer LCD marked as WYH L12864 COG +// +//#define WYH_L12864 + // // MakerLab Mini Panel with graphic // controller and SD support - https://reprap.org/wiki/Mini_panel diff --git a/config/examples/Dagoma/Disco Ultimate/Configuration_adv.h b/config/examples/Dagoma/Disco Ultimate/Configuration_adv.h index 4063ddc26f..f11e1f0e0a 100644 --- a/config/examples/Dagoma/Disco Ultimate/Configuration_adv.h +++ b/config/examples/Dagoma/Disco Ultimate/Configuration_adv.h @@ -1603,7 +1603,7 @@ * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. * This will prevent position updates from being displayed. */ - #if ENABLED(U8GLIB_ST7920) + #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. //#define DOGM_SPI_DELAY_US 5 diff --git a/config/examples/Daycom/3DP-100/Configuration.h b/config/examples/Daycom/3DP-100/Configuration.h index 69ea540c29..f1bcc43b09 100644 --- a/config/examples/Daycom/3DP-100/Configuration.h +++ b/config/examples/Daycom/3DP-100/Configuration.h @@ -2379,6 +2379,11 @@ //#define VIKI2 //#define miniVIKI +// +// Alfawise Ex8 printer LCD marked as WYH L12864 COG +// +//#define WYH_L12864 + // // MakerLab Mini Panel with graphic // controller and SD support - https://reprap.org/wiki/Mini_panel diff --git a/config/examples/Daycom/3DP-100/Configuration_adv.h b/config/examples/Daycom/3DP-100/Configuration_adv.h index 46a63f83af..637fe315a0 100644 --- a/config/examples/Daycom/3DP-100/Configuration_adv.h +++ b/config/examples/Daycom/3DP-100/Configuration_adv.h @@ -1603,7 +1603,7 @@ * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. * This will prevent position updates from being displayed. */ - #if ENABLED(U8GLIB_ST7920) + #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. //#define DOGM_SPI_DELAY_US 5 diff --git a/config/examples/EXP3D/Imprimante multifonction/Configuration.h b/config/examples/EXP3D/Imprimante multifonction/Configuration.h index 8937361396..9b8396ed15 100644 --- a/config/examples/EXP3D/Imprimante multifonction/Configuration.h +++ b/config/examples/EXP3D/Imprimante multifonction/Configuration.h @@ -2376,6 +2376,11 @@ //#define VIKI2 //#define miniVIKI +// +// Alfawise Ex8 printer LCD marked as WYH L12864 COG +// +//#define WYH_L12864 + // // MakerLab Mini Panel with graphic // controller and SD support - https://reprap.org/wiki/Mini_panel diff --git a/config/examples/EXP3D/Imprimante multifonction/Configuration_adv.h b/config/examples/EXP3D/Imprimante multifonction/Configuration_adv.h index 498c727d5c..6fe0ff2de1 100644 --- a/config/examples/EXP3D/Imprimante multifonction/Configuration_adv.h +++ b/config/examples/EXP3D/Imprimante multifonction/Configuration_adv.h @@ -1603,7 +1603,7 @@ * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. * This will prevent position updates from being displayed. */ - #if ENABLED(U8GLIB_ST7920) + #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. //#define DOGM_SPI_DELAY_US 5 diff --git a/config/examples/Einstart-S/Configuration.h b/config/examples/Einstart-S/Configuration.h index b328dc9458..7433001727 100644 --- a/config/examples/Einstart-S/Configuration.h +++ b/config/examples/Einstart-S/Configuration.h @@ -2381,6 +2381,11 @@ //#define VIKI2 //#define miniVIKI +// +// Alfawise Ex8 printer LCD marked as WYH L12864 COG +// +//#define WYH_L12864 + // // MakerLab Mini Panel with graphic // controller and SD support - https://reprap.org/wiki/Mini_panel diff --git a/config/examples/Einstart-S/Configuration_adv.h b/config/examples/Einstart-S/Configuration_adv.h index fbfb00d148..291f4df366 100644 --- a/config/examples/Einstart-S/Configuration_adv.h +++ b/config/examples/Einstart-S/Configuration_adv.h @@ -1603,7 +1603,7 @@ * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. * This will prevent position updates from being displayed. */ - #if ENABLED(U8GLIB_ST7920) + #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. //#define DOGM_SPI_DELAY_US 5 diff --git a/config/examples/Eryone/Thinker SE/Configuration.h b/config/examples/Eryone/Thinker SE/Configuration.h index 77ef63c603..7b0c311caa 100644 --- a/config/examples/Eryone/Thinker SE/Configuration.h +++ b/config/examples/Eryone/Thinker SE/Configuration.h @@ -2423,6 +2423,11 @@ //#define VIKI2 //#define miniVIKI +// +// Alfawise Ex8 printer LCD marked as WYH L12864 COG +// +//#define WYH_L12864 + // // MakerLab Mini Panel with graphic // controller and SD support - https://reprap.org/wiki/Mini_panel diff --git a/config/examples/Eryone/Thinker SE/Configuration_adv.h b/config/examples/Eryone/Thinker SE/Configuration_adv.h index 8d65edc32f..fa523d9a42 100644 --- a/config/examples/Eryone/Thinker SE/Configuration_adv.h +++ b/config/examples/Eryone/Thinker SE/Configuration_adv.h @@ -1603,7 +1603,7 @@ * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. * This will prevent position updates from being displayed. */ - #if ENABLED(U8GLIB_ST7920) + #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. //#define DOGM_SPI_DELAY_US 5 diff --git a/config/examples/Eryone/Thinker V2/Configuration.h b/config/examples/Eryone/Thinker V2/Configuration.h index bdcc7b6e06..ad25d293a0 100644 --- a/config/examples/Eryone/Thinker V2/Configuration.h +++ b/config/examples/Eryone/Thinker V2/Configuration.h @@ -2420,6 +2420,11 @@ //#define VIKI2 //#define miniVIKI +// +// Alfawise Ex8 printer LCD marked as WYH L12864 COG +// +//#define WYH_L12864 + // // MakerLab Mini Panel with graphic // controller and SD support - https://reprap.org/wiki/Mini_panel diff --git a/config/examples/Eryone/Thinker V2/Configuration_adv.h b/config/examples/Eryone/Thinker V2/Configuration_adv.h index 62a10d01a0..28d2806415 100644 --- a/config/examples/Eryone/Thinker V2/Configuration_adv.h +++ b/config/examples/Eryone/Thinker V2/Configuration_adv.h @@ -1603,7 +1603,7 @@ * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. * This will prevent position updates from being displayed. */ - #if ENABLED(U8GLIB_ST7920) + #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. //#define DOGM_SPI_DELAY_US 5 diff --git a/config/examples/FYSETC/AIO_II/Configuration.h b/config/examples/FYSETC/AIO_II/Configuration.h index fb2d2a7a7c..e99c381d50 100644 --- a/config/examples/FYSETC/AIO_II/Configuration.h +++ b/config/examples/FYSETC/AIO_II/Configuration.h @@ -2377,6 +2377,11 @@ //#define VIKI2 //#define miniVIKI +// +// Alfawise Ex8 printer LCD marked as WYH L12864 COG +// +//#define WYH_L12864 + // // MakerLab Mini Panel with graphic // controller and SD support - https://reprap.org/wiki/Mini_panel diff --git a/config/examples/FYSETC/AIO_II/Configuration_adv.h b/config/examples/FYSETC/AIO_II/Configuration_adv.h index 99331cc3e4..4e45abe65f 100644 --- a/config/examples/FYSETC/AIO_II/Configuration_adv.h +++ b/config/examples/FYSETC/AIO_II/Configuration_adv.h @@ -1603,7 +1603,7 @@ * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. * This will prevent position updates from being displayed. */ - #if ENABLED(U8GLIB_ST7920) + #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. //#define DOGM_SPI_DELAY_US 5 diff --git a/config/examples/FYSETC/F6_13/Configuration.h b/config/examples/FYSETC/F6_13/Configuration.h index 5ca2fda8c8..bd482c6498 100644 --- a/config/examples/FYSETC/F6_13/Configuration.h +++ b/config/examples/FYSETC/F6_13/Configuration.h @@ -2378,6 +2378,11 @@ //#define VIKI2 //#define miniVIKI +// +// Alfawise Ex8 printer LCD marked as WYH L12864 COG +// +//#define WYH_L12864 + // // MakerLab Mini Panel with graphic // controller and SD support - https://reprap.org/wiki/Mini_panel diff --git a/config/examples/FYSETC/F6_13/Configuration_adv.h b/config/examples/FYSETC/F6_13/Configuration_adv.h index 67cd2f37c7..92b743e7ff 100644 --- a/config/examples/FYSETC/F6_13/Configuration_adv.h +++ b/config/examples/FYSETC/F6_13/Configuration_adv.h @@ -1603,7 +1603,7 @@ * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. * This will prevent position updates from being displayed. */ - #if ENABLED(U8GLIB_ST7920) + #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. //#define DOGM_SPI_DELAY_US 5 diff --git a/config/examples/FYSETC/S6/Configuration.h b/config/examples/FYSETC/S6/Configuration.h index 8f48198d52..1ad5ca84bb 100644 --- a/config/examples/FYSETC/S6/Configuration.h +++ b/config/examples/FYSETC/S6/Configuration.h @@ -2376,6 +2376,11 @@ //#define VIKI2 //#define miniVIKI +// +// Alfawise Ex8 printer LCD marked as WYH L12864 COG +// +//#define WYH_L12864 + // // MakerLab Mini Panel with graphic // controller and SD support - https://reprap.org/wiki/Mini_panel diff --git a/config/examples/FYSETC/S6/Configuration_adv.h b/config/examples/FYSETC/S6/Configuration_adv.h index 00ae2bcd83..1958e21db5 100644 --- a/config/examples/FYSETC/S6/Configuration_adv.h +++ b/config/examples/FYSETC/S6/Configuration_adv.h @@ -1603,7 +1603,7 @@ * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. * This will prevent position updates from being displayed. */ - #if ENABLED(U8GLIB_ST7920) + #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. //#define DOGM_SPI_DELAY_US 5 diff --git a/config/examples/Felix/DUAL/Configuration.h b/config/examples/Felix/DUAL/Configuration.h index bbea79de34..852a7ed263 100644 --- a/config/examples/Felix/DUAL/Configuration.h +++ b/config/examples/Felix/DUAL/Configuration.h @@ -2377,6 +2377,11 @@ //#define VIKI2 //#define miniVIKI +// +// Alfawise Ex8 printer LCD marked as WYH L12864 COG +// +//#define WYH_L12864 + // // MakerLab Mini Panel with graphic // controller and SD support - https://reprap.org/wiki/Mini_panel diff --git a/config/examples/Felix/DUAL/Configuration_adv.h b/config/examples/Felix/DUAL/Configuration_adv.h index f6294e5e5a..8d8a4560fa 100644 --- a/config/examples/Felix/DUAL/Configuration_adv.h +++ b/config/examples/Felix/DUAL/Configuration_adv.h @@ -1603,7 +1603,7 @@ * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. * This will prevent position updates from being displayed. */ - #if ENABLED(U8GLIB_ST7920) + #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. //#define DOGM_SPI_DELAY_US 5 diff --git a/config/examples/Felix/Single/Configuration.h b/config/examples/Felix/Single/Configuration.h index ff10a85025..bcc823e97d 100644 --- a/config/examples/Felix/Single/Configuration.h +++ b/config/examples/Felix/Single/Configuration.h @@ -2377,6 +2377,11 @@ //#define VIKI2 //#define miniVIKI +// +// Alfawise Ex8 printer LCD marked as WYH L12864 COG +// +//#define WYH_L12864 + // // MakerLab Mini Panel with graphic // controller and SD support - https://reprap.org/wiki/Mini_panel diff --git a/config/examples/Felix/Single/Configuration_adv.h b/config/examples/Felix/Single/Configuration_adv.h index f6294e5e5a..8d8a4560fa 100644 --- a/config/examples/Felix/Single/Configuration_adv.h +++ b/config/examples/Felix/Single/Configuration_adv.h @@ -1603,7 +1603,7 @@ * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. * This will prevent position updates from being displayed. */ - #if ENABLED(U8GLIB_ST7920) + #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. //#define DOGM_SPI_DELAY_US 5 diff --git a/config/examples/FlashForge/Creator 2X/Configuration.h b/config/examples/FlashForge/Creator 2X/Configuration.h index f304bf8301..d8d948247e 100644 --- a/config/examples/FlashForge/Creator 2X/Configuration.h +++ b/config/examples/FlashForge/Creator 2X/Configuration.h @@ -2378,6 +2378,11 @@ //#define VIKI2 //#define miniVIKI +// +// Alfawise Ex8 printer LCD marked as WYH L12864 COG +// +//#define WYH_L12864 + // // MakerLab Mini Panel with graphic // controller and SD support - https://reprap.org/wiki/Mini_panel diff --git a/config/examples/FlashForge/Creator 2X/Configuration_adv.h b/config/examples/FlashForge/Creator 2X/Configuration_adv.h index 71cf744422..5e4c556f0f 100644 --- a/config/examples/FlashForge/Creator 2X/Configuration_adv.h +++ b/config/examples/FlashForge/Creator 2X/Configuration_adv.h @@ -1603,7 +1603,7 @@ * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. * This will prevent position updates from being displayed. */ - #if ENABLED(U8GLIB_ST7920) + #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. //#define DOGM_SPI_DELAY_US 5 diff --git a/config/examples/FlashForge/CreatorPro/Configuration.h b/config/examples/FlashForge/CreatorPro/Configuration.h index 7ace19b0a0..9726b522a8 100644 --- a/config/examples/FlashForge/CreatorPro/Configuration.h +++ b/config/examples/FlashForge/CreatorPro/Configuration.h @@ -2378,6 +2378,11 @@ //#define VIKI2 //#define miniVIKI +// +// Alfawise Ex8 printer LCD marked as WYH L12864 COG +// +//#define WYH_L12864 + // // MakerLab Mini Panel with graphic // controller and SD support - https://reprap.org/wiki/Mini_panel diff --git a/config/examples/FlashForge/CreatorPro/Configuration_adv.h b/config/examples/FlashForge/CreatorPro/Configuration_adv.h index a638b90ed3..bac5245f7e 100644 --- a/config/examples/FlashForge/CreatorPro/Configuration_adv.h +++ b/config/examples/FlashForge/CreatorPro/Configuration_adv.h @@ -1602,7 +1602,7 @@ * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. * This will prevent position updates from being displayed. */ - #if ENABLED(U8GLIB_ST7920) + #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. //#define DOGM_SPI_DELAY_US 5 diff --git a/config/examples/FlyingBear/P902/Configuration.h b/config/examples/FlyingBear/P902/Configuration.h index 7e27026600..6da7fcfbc2 100644 --- a/config/examples/FlyingBear/P902/Configuration.h +++ b/config/examples/FlyingBear/P902/Configuration.h @@ -2382,6 +2382,11 @@ //#define VIKI2 //#define miniVIKI +// +// Alfawise Ex8 printer LCD marked as WYH L12864 COG +// +//#define WYH_L12864 + // // MakerLab Mini Panel with graphic // controller and SD support - https://reprap.org/wiki/Mini_panel diff --git a/config/examples/FlyingBear/P902/Configuration_adv.h b/config/examples/FlyingBear/P902/Configuration_adv.h index 3eea3bfa7a..d608e4ee33 100644 --- a/config/examples/FlyingBear/P902/Configuration_adv.h +++ b/config/examples/FlyingBear/P902/Configuration_adv.h @@ -1603,7 +1603,7 @@ * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. * This will prevent position updates from being displayed. */ - #if ENABLED(U8GLIB_ST7920) + #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. //#define DOGM_SPI_DELAY_US 5 diff --git a/config/examples/FlyingBear/P905H/Configuration.h b/config/examples/FlyingBear/P905H/Configuration.h index ad382e01b7..f5291416a8 100644 --- a/config/examples/FlyingBear/P905H/Configuration.h +++ b/config/examples/FlyingBear/P905H/Configuration.h @@ -2381,6 +2381,11 @@ //#define VIKI2 //#define miniVIKI +// +// Alfawise Ex8 printer LCD marked as WYH L12864 COG +// +//#define WYH_L12864 + // // MakerLab Mini Panel with graphic // controller and SD support - https://reprap.org/wiki/Mini_panel diff --git a/config/examples/FlyingBear/P905H/Configuration_adv.h b/config/examples/FlyingBear/P905H/Configuration_adv.h index e5aa09b505..c2f103dae4 100644 --- a/config/examples/FlyingBear/P905H/Configuration_adv.h +++ b/config/examples/FlyingBear/P905H/Configuration_adv.h @@ -1606,7 +1606,7 @@ * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. * This will prevent position updates from being displayed. */ - #if ENABLED(U8GLIB_ST7920) + #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. //#define DOGM_SPI_DELAY_US 5 diff --git a/config/examples/FoamCutter/Configuration.h b/config/examples/FoamCutter/Configuration.h index 2c8ecfa916..247cf72473 100644 --- a/config/examples/FoamCutter/Configuration.h +++ b/config/examples/FoamCutter/Configuration.h @@ -2375,6 +2375,11 @@ //#define VIKI2 //#define miniVIKI +// +// Alfawise Ex8 printer LCD marked as WYH L12864 COG +// +//#define WYH_L12864 + // // MakerLab Mini Panel with graphic // controller and SD support - https://reprap.org/wiki/Mini_panel diff --git a/config/examples/FoamCutter/Configuration_adv.h b/config/examples/FoamCutter/Configuration_adv.h index 63b768cfea..4a9eabfac2 100644 --- a/config/examples/FoamCutter/Configuration_adv.h +++ b/config/examples/FoamCutter/Configuration_adv.h @@ -1603,7 +1603,7 @@ * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. * This will prevent position updates from being displayed. */ - #if ENABLED(U8GLIB_ST7920) + #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. //#define DOGM_SPI_DELAY_US 5 diff --git a/config/examples/FolgerTech/i3-2020/Configuration.h b/config/examples/FolgerTech/i3-2020/Configuration.h index 955cc163e1..01e8444f68 100644 --- a/config/examples/FolgerTech/i3-2020/Configuration.h +++ b/config/examples/FolgerTech/i3-2020/Configuration.h @@ -2378,6 +2378,11 @@ //#define VIKI2 //#define miniVIKI +// +// Alfawise Ex8 printer LCD marked as WYH L12864 COG +// +//#define WYH_L12864 + // // MakerLab Mini Panel with graphic // controller and SD support - https://reprap.org/wiki/Mini_panel diff --git a/config/examples/FolgerTech/i3-2020/Configuration_adv.h b/config/examples/FolgerTech/i3-2020/Configuration_adv.h index af66cb2a22..0ce7c0426f 100644 --- a/config/examples/FolgerTech/i3-2020/Configuration_adv.h +++ b/config/examples/FolgerTech/i3-2020/Configuration_adv.h @@ -1603,7 +1603,7 @@ * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. * This will prevent position updates from being displayed. */ - #if ENABLED(U8GLIB_ST7920) + #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. //#define DOGM_SPI_DELAY_US 5 diff --git a/config/examples/Formbot/Raptor/Configuration.h b/config/examples/Formbot/Raptor/Configuration.h index 76bddae75c..097b7ec284 100644 --- a/config/examples/Formbot/Raptor/Configuration.h +++ b/config/examples/Formbot/Raptor/Configuration.h @@ -2487,6 +2487,11 @@ //#define VIKI2 //#define miniVIKI +// +// Alfawise Ex8 printer LCD marked as WYH L12864 COG +// +//#define WYH_L12864 + // // MakerLab Mini Panel with graphic // controller and SD support - https://reprap.org/wiki/Mini_panel diff --git a/config/examples/Formbot/Raptor/Configuration_adv.h b/config/examples/Formbot/Raptor/Configuration_adv.h index 55025866c2..cfc2f17836 100644 --- a/config/examples/Formbot/Raptor/Configuration_adv.h +++ b/config/examples/Formbot/Raptor/Configuration_adv.h @@ -1603,7 +1603,7 @@ * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. * This will prevent position updates from being displayed. */ - #if ENABLED(U8GLIB_ST7920) + #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. //#define DOGM_SPI_DELAY_US 5 diff --git a/config/examples/Formbot/T_Rex_2+/Configuration.h b/config/examples/Formbot/T_Rex_2+/Configuration.h index 3ff6d7da6c..f39cd23aae 100644 --- a/config/examples/Formbot/T_Rex_2+/Configuration.h +++ b/config/examples/Formbot/T_Rex_2+/Configuration.h @@ -2376,6 +2376,11 @@ //#define VIKI2 //#define miniVIKI +// +// Alfawise Ex8 printer LCD marked as WYH L12864 COG +// +//#define WYH_L12864 + // // MakerLab Mini Panel with graphic // controller and SD support - https://reprap.org/wiki/Mini_panel diff --git a/config/examples/Formbot/T_Rex_2+/Configuration_adv.h b/config/examples/Formbot/T_Rex_2+/Configuration_adv.h index 1f4b409209..92ef2ef7ed 100644 --- a/config/examples/Formbot/T_Rex_2+/Configuration_adv.h +++ b/config/examples/Formbot/T_Rex_2+/Configuration_adv.h @@ -1603,7 +1603,7 @@ * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. * This will prevent position updates from being displayed. */ - #if ENABLED(U8GLIB_ST7920) + #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. //#define DOGM_SPI_DELAY_US 5 diff --git a/config/examples/Formbot/T_Rex_3/Configuration.h b/config/examples/Formbot/T_Rex_3/Configuration.h index 62ed6b2cfe..6b1328ce1b 100644 --- a/config/examples/Formbot/T_Rex_3/Configuration.h +++ b/config/examples/Formbot/T_Rex_3/Configuration.h @@ -2392,6 +2392,11 @@ //#define VIKI2 //#define miniVIKI +// +// Alfawise Ex8 printer LCD marked as WYH L12864 COG +// +//#define WYH_L12864 + // // MakerLab Mini Panel with graphic // controller and SD support - https://reprap.org/wiki/Mini_panel diff --git a/config/examples/Formbot/T_Rex_3/Configuration_adv.h b/config/examples/Formbot/T_Rex_3/Configuration_adv.h index 38075f24b8..e0a729b03d 100644 --- a/config/examples/Formbot/T_Rex_3/Configuration_adv.h +++ b/config/examples/Formbot/T_Rex_3/Configuration_adv.h @@ -1607,7 +1607,7 @@ * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. * This will prevent position updates from being displayed. */ - #if ENABLED(U8GLIB_ST7920) + #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. //#define DOGM_SPI_DELAY_US 5 diff --git a/config/examples/Geeetech/A10/Configuration.h b/config/examples/Geeetech/A10/Configuration.h index d37eccba7a..b73cc432f6 100644 --- a/config/examples/Geeetech/A10/Configuration.h +++ b/config/examples/Geeetech/A10/Configuration.h @@ -2376,6 +2376,11 @@ //#define VIKI2 //#define miniVIKI +// +// Alfawise Ex8 printer LCD marked as WYH L12864 COG +// +//#define WYH_L12864 + // // MakerLab Mini Panel with graphic // controller and SD support - https://reprap.org/wiki/Mini_panel diff --git a/config/examples/Geeetech/A10/Configuration_adv.h b/config/examples/Geeetech/A10/Configuration_adv.h index 73233aa764..a4618f0cdd 100644 --- a/config/examples/Geeetech/A10/Configuration_adv.h +++ b/config/examples/Geeetech/A10/Configuration_adv.h @@ -1603,7 +1603,7 @@ * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. * This will prevent position updates from being displayed. */ - #if ENABLED(U8GLIB_ST7920) + #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. //#define DOGM_SPI_DELAY_US 5 diff --git a/config/examples/Geeetech/A10D/Configuration.h b/config/examples/Geeetech/A10D/Configuration.h index 9304d9ff42..785cf0abad 100644 --- a/config/examples/Geeetech/A10D/Configuration.h +++ b/config/examples/Geeetech/A10D/Configuration.h @@ -2376,6 +2376,11 @@ //#define VIKI2 //#define miniVIKI +// +// Alfawise Ex8 printer LCD marked as WYH L12864 COG +// +//#define WYH_L12864 + // // MakerLab Mini Panel with graphic // controller and SD support - https://reprap.org/wiki/Mini_panel diff --git a/config/examples/Geeetech/A10D/Configuration_adv.h b/config/examples/Geeetech/A10D/Configuration_adv.h index c44a77d6cf..3e252863f0 100644 --- a/config/examples/Geeetech/A10D/Configuration_adv.h +++ b/config/examples/Geeetech/A10D/Configuration_adv.h @@ -1603,7 +1603,7 @@ * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. * This will prevent position updates from being displayed. */ - #if ENABLED(U8GLIB_ST7920) + #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. //#define DOGM_SPI_DELAY_US 5 diff --git a/config/examples/Geeetech/A10M/Stock LCD/Configuration.h b/config/examples/Geeetech/A10M/Stock LCD/Configuration.h index 10e42a47b1..1545d39bd2 100644 --- a/config/examples/Geeetech/A10M/Stock LCD/Configuration.h +++ b/config/examples/Geeetech/A10M/Stock LCD/Configuration.h @@ -2378,6 +2378,11 @@ //#define VIKI2 //#define miniVIKI +// +// Alfawise Ex8 printer LCD marked as WYH L12864 COG +// +//#define WYH_L12864 + // // MakerLab Mini Panel with graphic // controller and SD support - https://reprap.org/wiki/Mini_panel diff --git a/config/examples/Geeetech/A10M/Stock LCD/Configuration_adv.h b/config/examples/Geeetech/A10M/Stock LCD/Configuration_adv.h index fda690df2d..c791119fed 100644 --- a/config/examples/Geeetech/A10M/Stock LCD/Configuration_adv.h +++ b/config/examples/Geeetech/A10M/Stock LCD/Configuration_adv.h @@ -1603,7 +1603,7 @@ * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. * This will prevent position updates from being displayed. */ - #if ENABLED(U8GLIB_ST7920) + #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. //#define DOGM_SPI_DELAY_US 5 diff --git a/config/examples/Geeetech/A10M/YHCB2004_V4.1/Configuration.h b/config/examples/Geeetech/A10M/YHCB2004_V4.1/Configuration.h index 34df665224..ce698eea7e 100644 --- a/config/examples/Geeetech/A10M/YHCB2004_V4.1/Configuration.h +++ b/config/examples/Geeetech/A10M/YHCB2004_V4.1/Configuration.h @@ -2378,6 +2378,11 @@ //#define VIKI2 //#define miniVIKI +// +// Alfawise Ex8 printer LCD marked as WYH L12864 COG +// +//#define WYH_L12864 + // // MakerLab Mini Panel with graphic // controller and SD support - https://reprap.org/wiki/Mini_panel diff --git a/config/examples/Geeetech/A10M/YHCB2004_V4.1/Configuration_adv.h b/config/examples/Geeetech/A10M/YHCB2004_V4.1/Configuration_adv.h index fda690df2d..c791119fed 100644 --- a/config/examples/Geeetech/A10M/YHCB2004_V4.1/Configuration_adv.h +++ b/config/examples/Geeetech/A10M/YHCB2004_V4.1/Configuration_adv.h @@ -1603,7 +1603,7 @@ * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. * This will prevent position updates from being displayed. */ - #if ENABLED(U8GLIB_ST7920) + #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. //#define DOGM_SPI_DELAY_US 5 diff --git a/config/examples/Geeetech/A10PRO/Configuration.h b/config/examples/Geeetech/A10PRO/Configuration.h index a6cac307d2..06e1cb2311 100644 --- a/config/examples/Geeetech/A10PRO/Configuration.h +++ b/config/examples/Geeetech/A10PRO/Configuration.h @@ -2376,6 +2376,11 @@ //#define VIKI2 //#define miniVIKI +// +// Alfawise Ex8 printer LCD marked as WYH L12864 COG +// +//#define WYH_L12864 + // // MakerLab Mini Panel with graphic // controller and SD support - https://reprap.org/wiki/Mini_panel diff --git a/config/examples/Geeetech/A10PRO/Configuration_adv.h b/config/examples/Geeetech/A10PRO/Configuration_adv.h index 73233aa764..a4618f0cdd 100644 --- a/config/examples/Geeetech/A10PRO/Configuration_adv.h +++ b/config/examples/Geeetech/A10PRO/Configuration_adv.h @@ -1603,7 +1603,7 @@ * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. * This will prevent position updates from being displayed. */ - #if ENABLED(U8GLIB_ST7920) + #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. //#define DOGM_SPI_DELAY_US 5 diff --git a/config/examples/Geeetech/A10T/Stock LCD/Configuration.h b/config/examples/Geeetech/A10T/Stock LCD/Configuration.h index 895e500c45..87a83a4d25 100644 --- a/config/examples/Geeetech/A10T/Stock LCD/Configuration.h +++ b/config/examples/Geeetech/A10T/Stock LCD/Configuration.h @@ -2379,6 +2379,11 @@ //#define VIKI2 //#define miniVIKI +// +// Alfawise Ex8 printer LCD marked as WYH L12864 COG +// +//#define WYH_L12864 + // // MakerLab Mini Panel with graphic // controller and SD support - https://reprap.org/wiki/Mini_panel diff --git a/config/examples/Geeetech/A10T/Stock LCD/Configuration_adv.h b/config/examples/Geeetech/A10T/Stock LCD/Configuration_adv.h index fda690df2d..c791119fed 100644 --- a/config/examples/Geeetech/A10T/Stock LCD/Configuration_adv.h +++ b/config/examples/Geeetech/A10T/Stock LCD/Configuration_adv.h @@ -1603,7 +1603,7 @@ * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. * This will prevent position updates from being displayed. */ - #if ENABLED(U8GLIB_ST7920) + #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. //#define DOGM_SPI_DELAY_US 5 diff --git a/config/examples/Geeetech/A10T/YHCB2004_V4.1/Configuration.h b/config/examples/Geeetech/A10T/YHCB2004_V4.1/Configuration.h index 2d92ea0fa4..c7bbc0f96f 100644 --- a/config/examples/Geeetech/A10T/YHCB2004_V4.1/Configuration.h +++ b/config/examples/Geeetech/A10T/YHCB2004_V4.1/Configuration.h @@ -2379,6 +2379,11 @@ //#define VIKI2 //#define miniVIKI +// +// Alfawise Ex8 printer LCD marked as WYH L12864 COG +// +//#define WYH_L12864 + // // MakerLab Mini Panel with graphic // controller and SD support - https://reprap.org/wiki/Mini_panel diff --git a/config/examples/Geeetech/A10T/YHCB2004_V4.1/Configuration_adv.h b/config/examples/Geeetech/A10T/YHCB2004_V4.1/Configuration_adv.h index fda690df2d..c791119fed 100644 --- a/config/examples/Geeetech/A10T/YHCB2004_V4.1/Configuration_adv.h +++ b/config/examples/Geeetech/A10T/YHCB2004_V4.1/Configuration_adv.h @@ -1603,7 +1603,7 @@ * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. * This will prevent position updates from being displayed. */ - #if ENABLED(U8GLIB_ST7920) + #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. //#define DOGM_SPI_DELAY_US 5 diff --git a/config/examples/Geeetech/A20/Configuration.h b/config/examples/Geeetech/A20/Configuration.h index f3022fabad..c8ca671f4e 100644 --- a/config/examples/Geeetech/A20/Configuration.h +++ b/config/examples/Geeetech/A20/Configuration.h @@ -2380,6 +2380,11 @@ //#define VIKI2 //#define miniVIKI +// +// Alfawise Ex8 printer LCD marked as WYH L12864 COG +// +//#define WYH_L12864 + // // MakerLab Mini Panel with graphic // controller and SD support - https://reprap.org/wiki/Mini_panel diff --git a/config/examples/Geeetech/A20/Configuration_adv.h b/config/examples/Geeetech/A20/Configuration_adv.h index e5b25123c9..1ab77474f5 100644 --- a/config/examples/Geeetech/A20/Configuration_adv.h +++ b/config/examples/Geeetech/A20/Configuration_adv.h @@ -1603,7 +1603,7 @@ * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. * This will prevent position updates from being displayed. */ - #if ENABLED(U8GLIB_ST7920) + #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. //#define DOGM_SPI_DELAY_US 5 diff --git a/config/examples/Geeetech/A20M/Configuration.h b/config/examples/Geeetech/A20M/Configuration.h index e298df4ff0..bf1fb7483c 100644 --- a/config/examples/Geeetech/A20M/Configuration.h +++ b/config/examples/Geeetech/A20M/Configuration.h @@ -2381,6 +2381,11 @@ //#define VIKI2 //#define miniVIKI +// +// Alfawise Ex8 printer LCD marked as WYH L12864 COG +// +//#define WYH_L12864 + // // MakerLab Mini Panel with graphic // controller and SD support - https://reprap.org/wiki/Mini_panel diff --git a/config/examples/Geeetech/A20M/Configuration_adv.h b/config/examples/Geeetech/A20M/Configuration_adv.h index e5b25123c9..1ab77474f5 100644 --- a/config/examples/Geeetech/A20M/Configuration_adv.h +++ b/config/examples/Geeetech/A20M/Configuration_adv.h @@ -1603,7 +1603,7 @@ * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. * This will prevent position updates from being displayed. */ - #if ENABLED(U8GLIB_ST7920) + #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. //#define DOGM_SPI_DELAY_US 5 diff --git a/config/examples/Geeetech/A20T/Configuration.h b/config/examples/Geeetech/A20T/Configuration.h index b3285a71db..caae2ce20e 100644 --- a/config/examples/Geeetech/A20T/Configuration.h +++ b/config/examples/Geeetech/A20T/Configuration.h @@ -2382,6 +2382,11 @@ //#define VIKI2 //#define miniVIKI +// +// Alfawise Ex8 printer LCD marked as WYH L12864 COG +// +//#define WYH_L12864 + // // MakerLab Mini Panel with graphic // controller and SD support - https://reprap.org/wiki/Mini_panel diff --git a/config/examples/Geeetech/A20T/Configuration_adv.h b/config/examples/Geeetech/A20T/Configuration_adv.h index e5b25123c9..1ab77474f5 100644 --- a/config/examples/Geeetech/A20T/Configuration_adv.h +++ b/config/examples/Geeetech/A20T/Configuration_adv.h @@ -1603,7 +1603,7 @@ * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. * This will prevent position updates from being displayed. */ - #if ENABLED(U8GLIB_ST7920) + #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. //#define DOGM_SPI_DELAY_US 5 diff --git a/config/examples/Geeetech/A30/Configuration.h b/config/examples/Geeetech/A30/Configuration.h index 214d65c342..d86a46a05f 100644 --- a/config/examples/Geeetech/A30/Configuration.h +++ b/config/examples/Geeetech/A30/Configuration.h @@ -2379,6 +2379,11 @@ //#define VIKI2 //#define miniVIKI +// +// Alfawise Ex8 printer LCD marked as WYH L12864 COG +// +//#define WYH_L12864 + // // MakerLab Mini Panel with graphic // controller and SD support - https://reprap.org/wiki/Mini_panel diff --git a/config/examples/Geeetech/A30/Configuration_adv.h b/config/examples/Geeetech/A30/Configuration_adv.h index fc9725c971..4058cffc22 100644 --- a/config/examples/Geeetech/A30/Configuration_adv.h +++ b/config/examples/Geeetech/A30/Configuration_adv.h @@ -1603,7 +1603,7 @@ * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. * This will prevent position updates from being displayed. */ - #if ENABLED(U8GLIB_ST7920) + #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. //#define DOGM_SPI_DELAY_US 5 diff --git a/config/examples/Geeetech/A30M/Configuration.h b/config/examples/Geeetech/A30M/Configuration.h index e9f30e55f5..7e83afe3ed 100644 --- a/config/examples/Geeetech/A30M/Configuration.h +++ b/config/examples/Geeetech/A30M/Configuration.h @@ -2379,6 +2379,11 @@ //#define VIKI2 //#define miniVIKI +// +// Alfawise Ex8 printer LCD marked as WYH L12864 COG +// +//#define WYH_L12864 + // // MakerLab Mini Panel with graphic // controller and SD support - https://reprap.org/wiki/Mini_panel diff --git a/config/examples/Geeetech/A30M/Configuration_adv.h b/config/examples/Geeetech/A30M/Configuration_adv.h index fc9725c971..4058cffc22 100644 --- a/config/examples/Geeetech/A30M/Configuration_adv.h +++ b/config/examples/Geeetech/A30M/Configuration_adv.h @@ -1603,7 +1603,7 @@ * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. * This will prevent position updates from being displayed. */ - #if ENABLED(U8GLIB_ST7920) + #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. //#define DOGM_SPI_DELAY_US 5 diff --git a/config/examples/Geeetech/A30T/Configuration.h b/config/examples/Geeetech/A30T/Configuration.h index 20f4f36b6c..ff2c9efa9a 100644 --- a/config/examples/Geeetech/A30T/Configuration.h +++ b/config/examples/Geeetech/A30T/Configuration.h @@ -2379,6 +2379,11 @@ //#define VIKI2 //#define miniVIKI +// +// Alfawise Ex8 printer LCD marked as WYH L12864 COG +// +//#define WYH_L12864 + // // MakerLab Mini Panel with graphic // controller and SD support - https://reprap.org/wiki/Mini_panel diff --git a/config/examples/Geeetech/A30T/Configuration_adv.h b/config/examples/Geeetech/A30T/Configuration_adv.h index fc9725c971..4058cffc22 100644 --- a/config/examples/Geeetech/A30T/Configuration_adv.h +++ b/config/examples/Geeetech/A30T/Configuration_adv.h @@ -1603,7 +1603,7 @@ * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. * This will prevent position updates from being displayed. */ - #if ENABLED(U8GLIB_ST7920) + #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. //#define DOGM_SPI_DELAY_US 5 diff --git a/config/examples/Geeetech/D200/Configuration.h b/config/examples/Geeetech/D200/Configuration.h index 794bd2015e..6cd91be35e 100644 --- a/config/examples/Geeetech/D200/Configuration.h +++ b/config/examples/Geeetech/D200/Configuration.h @@ -2379,6 +2379,11 @@ //#define VIKI2 //#define miniVIKI +// +// Alfawise Ex8 printer LCD marked as WYH L12864 COG +// +//#define WYH_L12864 + // // MakerLab Mini Panel with graphic // controller and SD support - https://reprap.org/wiki/Mini_panel diff --git a/config/examples/Geeetech/D200/Configuration_adv.h b/config/examples/Geeetech/D200/Configuration_adv.h index 658d5f84b2..02720ad3ea 100644 --- a/config/examples/Geeetech/D200/Configuration_adv.h +++ b/config/examples/Geeetech/D200/Configuration_adv.h @@ -1603,7 +1603,7 @@ * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. * This will prevent position updates from being displayed. */ - #if ENABLED(U8GLIB_ST7920) + #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. //#define DOGM_SPI_DELAY_US 5 diff --git a/config/examples/Geeetech/Duplicator5/Configuration.h b/config/examples/Geeetech/Duplicator5/Configuration.h index 7429907190..002df40104 100644 --- a/config/examples/Geeetech/Duplicator5/Configuration.h +++ b/config/examples/Geeetech/Duplicator5/Configuration.h @@ -2376,6 +2376,11 @@ //#define VIKI2 //#define miniVIKI +// +// Alfawise Ex8 printer LCD marked as WYH L12864 COG +// +//#define WYH_L12864 + // // MakerLab Mini Panel with graphic // controller and SD support - https://reprap.org/wiki/Mini_panel diff --git a/config/examples/Geeetech/Duplicator5/Configuration_adv.h b/config/examples/Geeetech/Duplicator5/Configuration_adv.h index 00ae2bcd83..1958e21db5 100644 --- a/config/examples/Geeetech/Duplicator5/Configuration_adv.h +++ b/config/examples/Geeetech/Duplicator5/Configuration_adv.h @@ -1603,7 +1603,7 @@ * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. * This will prevent position updates from being displayed. */ - #if ENABLED(U8GLIB_ST7920) + #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. //#define DOGM_SPI_DELAY_US 5 diff --git a/config/examples/Geeetech/E180/Configuration.h b/config/examples/Geeetech/E180/Configuration.h index 1f10eebe32..ef42f0491c 100644 --- a/config/examples/Geeetech/E180/Configuration.h +++ b/config/examples/Geeetech/E180/Configuration.h @@ -2380,6 +2380,11 @@ //#define VIKI2 //#define miniVIKI +// +// Alfawise Ex8 printer LCD marked as WYH L12864 COG +// +//#define WYH_L12864 + // // MakerLab Mini Panel with graphic // controller and SD support - https://reprap.org/wiki/Mini_panel diff --git a/config/examples/Geeetech/E180/Configuration_adv.h b/config/examples/Geeetech/E180/Configuration_adv.h index fc9725c971..4058cffc22 100644 --- a/config/examples/Geeetech/E180/Configuration_adv.h +++ b/config/examples/Geeetech/E180/Configuration_adv.h @@ -1603,7 +1603,7 @@ * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. * This will prevent position updates from being displayed. */ - #if ENABLED(U8GLIB_ST7920) + #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. //#define DOGM_SPI_DELAY_US 5 diff --git a/config/examples/Geeetech/GT2560/Configuration.h b/config/examples/Geeetech/GT2560/Configuration.h index c3701aa037..de8851d08a 100644 --- a/config/examples/Geeetech/GT2560/Configuration.h +++ b/config/examples/Geeetech/GT2560/Configuration.h @@ -2381,6 +2381,11 @@ //#define VIKI2 //#define miniVIKI +// +// Alfawise Ex8 printer LCD marked as WYH L12864 COG +// +//#define WYH_L12864 + // // MakerLab Mini Panel with graphic // controller and SD support - https://reprap.org/wiki/Mini_panel diff --git a/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h b/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h index 2c65911bf1..331abdc760 100644 --- a/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h +++ b/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h @@ -2376,6 +2376,11 @@ //#define VIKI2 //#define miniVIKI +// +// Alfawise Ex8 printer LCD marked as WYH L12864 COG +// +//#define WYH_L12864 + // // MakerLab Mini Panel with graphic // controller and SD support - https://reprap.org/wiki/Mini_panel diff --git a/config/examples/Geeetech/M201/Configuration.h b/config/examples/Geeetech/M201/Configuration.h index e2bc7f5b74..6a5ff25e22 100644 --- a/config/examples/Geeetech/M201/Configuration.h +++ b/config/examples/Geeetech/M201/Configuration.h @@ -2379,6 +2379,11 @@ //#define VIKI2 //#define miniVIKI +// +// Alfawise Ex8 printer LCD marked as WYH L12864 COG +// +//#define WYH_L12864 + // // MakerLab Mini Panel with graphic // controller and SD support - https://reprap.org/wiki/Mini_panel diff --git a/config/examples/Geeetech/M201/Configuration_adv.h b/config/examples/Geeetech/M201/Configuration_adv.h index 658d5f84b2..02720ad3ea 100644 --- a/config/examples/Geeetech/M201/Configuration_adv.h +++ b/config/examples/Geeetech/M201/Configuration_adv.h @@ -1603,7 +1603,7 @@ * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. * This will prevent position updates from being displayed. */ - #if ENABLED(U8GLIB_ST7920) + #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. //#define DOGM_SPI_DELAY_US 5 diff --git a/config/examples/Geeetech/MeCreator2/Configuration.h b/config/examples/Geeetech/MeCreator2/Configuration.h index 118d4b1e52..4a0cac7e4d 100644 --- a/config/examples/Geeetech/MeCreator2/Configuration.h +++ b/config/examples/Geeetech/MeCreator2/Configuration.h @@ -2375,6 +2375,11 @@ //#define VIKI2 //#define miniVIKI +// +// Alfawise Ex8 printer LCD marked as WYH L12864 COG +// +//#define WYH_L12864 + // // MakerLab Mini Panel with graphic // controller and SD support - https://reprap.org/wiki/Mini_panel diff --git a/config/examples/Geeetech/MeCreator2/Configuration_adv.h b/config/examples/Geeetech/MeCreator2/Configuration_adv.h index ed66700899..3e2e6a6459 100644 --- a/config/examples/Geeetech/MeCreator2/Configuration_adv.h +++ b/config/examples/Geeetech/MeCreator2/Configuration_adv.h @@ -1603,7 +1603,7 @@ * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. * This will prevent position updates from being displayed. */ - #if ENABLED(U8GLIB_ST7920) + #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. //#define DOGM_SPI_DELAY_US 5 diff --git a/config/examples/Geeetech/Me_creator/Configuration.h b/config/examples/Geeetech/Me_creator/Configuration.h index 388ff812bf..30f5b5c71b 100644 --- a/config/examples/Geeetech/Me_creator/Configuration.h +++ b/config/examples/Geeetech/Me_creator/Configuration.h @@ -2376,6 +2376,11 @@ //#define VIKI2 //#define miniVIKI +// +// Alfawise Ex8 printer LCD marked as WYH L12864 COG +// +//#define WYH_L12864 + // // MakerLab Mini Panel with graphic // controller and SD support - https://reprap.org/wiki/Mini_panel diff --git a/config/examples/Geeetech/Me_creator/Configuration_adv.h b/config/examples/Geeetech/Me_creator/Configuration_adv.h index 00ae2bcd83..1958e21db5 100644 --- a/config/examples/Geeetech/Me_creator/Configuration_adv.h +++ b/config/examples/Geeetech/Me_creator/Configuration_adv.h @@ -1603,7 +1603,7 @@ * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. * This will prevent position updates from being displayed. */ - #if ENABLED(U8GLIB_ST7920) + #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. //#define DOGM_SPI_DELAY_US 5 diff --git a/config/examples/Geeetech/Me_ducer/Configuration.h b/config/examples/Geeetech/Me_ducer/Configuration.h index 5c44a7fe72..45cfbb3088 100644 --- a/config/examples/Geeetech/Me_ducer/Configuration.h +++ b/config/examples/Geeetech/Me_ducer/Configuration.h @@ -2376,6 +2376,11 @@ //#define VIKI2 //#define miniVIKI +// +// Alfawise Ex8 printer LCD marked as WYH L12864 COG +// +//#define WYH_L12864 + // // MakerLab Mini Panel with graphic // controller and SD support - https://reprap.org/wiki/Mini_panel diff --git a/config/examples/Geeetech/Me_ducer/Configuration_adv.h b/config/examples/Geeetech/Me_ducer/Configuration_adv.h index f52dc66b47..52fb327203 100644 --- a/config/examples/Geeetech/Me_ducer/Configuration_adv.h +++ b/config/examples/Geeetech/Me_ducer/Configuration_adv.h @@ -1603,7 +1603,7 @@ * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. * This will prevent position updates from being displayed. */ - #if ENABLED(U8GLIB_ST7920) + #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. //#define DOGM_SPI_DELAY_US 5 diff --git a/config/examples/Geeetech/PI3A PRO/Configuration.h b/config/examples/Geeetech/PI3A PRO/Configuration.h index 8bd99742ec..268349e907 100644 --- a/config/examples/Geeetech/PI3A PRO/Configuration.h +++ b/config/examples/Geeetech/PI3A PRO/Configuration.h @@ -2386,6 +2386,11 @@ //#define VIKI2 //#define miniVIKI +// +// Alfawise Ex8 printer LCD marked as WYH L12864 COG +// +//#define WYH_L12864 + // // MakerLab Mini Panel with graphic // controller and SD support - https://reprap.org/wiki/Mini_panel diff --git a/config/examples/Geeetech/PI3A PRO/Configuration_adv.h b/config/examples/Geeetech/PI3A PRO/Configuration_adv.h index 040b36164a..873387e56c 100644 --- a/config/examples/Geeetech/PI3A PRO/Configuration_adv.h +++ b/config/examples/Geeetech/PI3A PRO/Configuration_adv.h @@ -1603,7 +1603,7 @@ * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. * This will prevent position updates from being displayed. */ - #if ENABLED(U8GLIB_ST7920) + #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. //#define DOGM_SPI_DELAY_US 5 diff --git a/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h b/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h index 72fb372357..8471b5c3d1 100644 --- a/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h +++ b/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h @@ -2387,6 +2387,11 @@ //#define VIKI2 //#define miniVIKI +// +// Alfawise Ex8 printer LCD marked as WYH L12864 COG +// +//#define WYH_L12864 + // // MakerLab Mini Panel with graphic // controller and SD support - https://reprap.org/wiki/Mini_panel diff --git a/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h b/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h index 9b8536b359..85e85f12a4 100644 --- a/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h +++ b/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h @@ -2386,6 +2386,11 @@ //#define VIKI2 //#define miniVIKI +// +// Alfawise Ex8 printer LCD marked as WYH L12864 COG +// +//#define WYH_L12864 + // // MakerLab Mini Panel with graphic // controller and SD support - https://reprap.org/wiki/Mini_panel diff --git a/config/examples/Geeetech/Prusa i3 Pro C/Configuration.h b/config/examples/Geeetech/Prusa i3 Pro C/Configuration.h index 8015a37bed..5e32465c96 100644 --- a/config/examples/Geeetech/Prusa i3 Pro C/Configuration.h +++ b/config/examples/Geeetech/Prusa i3 Pro C/Configuration.h @@ -2376,6 +2376,11 @@ //#define VIKI2 //#define miniVIKI +// +// Alfawise Ex8 printer LCD marked as WYH L12864 COG +// +//#define WYH_L12864 + // // MakerLab Mini Panel with graphic // controller and SD support - https://reprap.org/wiki/Mini_panel diff --git a/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h b/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h index 73233aa764..a4618f0cdd 100644 --- a/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h +++ b/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h @@ -1603,7 +1603,7 @@ * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. * This will prevent position updates from being displayed. */ - #if ENABLED(U8GLIB_ST7920) + #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. //#define DOGM_SPI_DELAY_US 5 diff --git a/config/examples/Geeetech/Prusa i3 Pro W/Configuration.h b/config/examples/Geeetech/Prusa i3 Pro W/Configuration.h index 31ce5a710d..305234c6d3 100644 --- a/config/examples/Geeetech/Prusa i3 Pro W/Configuration.h +++ b/config/examples/Geeetech/Prusa i3 Pro W/Configuration.h @@ -2376,6 +2376,11 @@ //#define VIKI2 //#define miniVIKI +// +// Alfawise Ex8 printer LCD marked as WYH L12864 COG +// +//#define WYH_L12864 + // // MakerLab Mini Panel with graphic // controller and SD support - https://reprap.org/wiki/Mini_panel diff --git a/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h b/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h index 73233aa764..a4618f0cdd 100644 --- a/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h +++ b/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h @@ -1603,7 +1603,7 @@ * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. * This will prevent position updates from being displayed. */ - #if ENABLED(U8GLIB_ST7920) + #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. //#define DOGM_SPI_DELAY_US 5 diff --git a/config/examples/HMS434/Configuration.h b/config/examples/HMS434/Configuration.h index 9214e37c97..b7ccb04252 100644 --- a/config/examples/HMS434/Configuration.h +++ b/config/examples/HMS434/Configuration.h @@ -2373,6 +2373,11 @@ //#define VIKI2 //#define miniVIKI +// +// Alfawise Ex8 printer LCD marked as WYH L12864 COG +// +//#define WYH_L12864 + // // MakerLab Mini Panel with graphic // controller and SD support - https://reprap.org/wiki/Mini_panel diff --git a/config/examples/HMS434/Configuration_adv.h b/config/examples/HMS434/Configuration_adv.h index 15cfdabcbc..9c3b7985bc 100644 --- a/config/examples/HMS434/Configuration_adv.h +++ b/config/examples/HMS434/Configuration_adv.h @@ -1603,7 +1603,7 @@ * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. * This will prevent position updates from being displayed. */ - #if ENABLED(U8GLIB_ST7920) + #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. //#define DOGM_SPI_DELAY_US 5 diff --git a/config/examples/Index/REV_03/Configuration.h b/config/examples/Index/REV_03/Configuration.h index fe1872e094..2f9b53b4c3 100644 --- a/config/examples/Index/REV_03/Configuration.h +++ b/config/examples/Index/REV_03/Configuration.h @@ -2381,6 +2381,11 @@ //#define VIKI2 //#define miniVIKI +// +// Alfawise Ex8 printer LCD marked as WYH L12864 COG +// +//#define WYH_L12864 + // // MakerLab Mini Panel with graphic // controller and SD support - https://reprap.org/wiki/Mini_panel diff --git a/config/examples/Index/REV_03/Configuration_adv.h b/config/examples/Index/REV_03/Configuration_adv.h index 1d3795ed0c..90121066e2 100644 --- a/config/examples/Index/REV_03/Configuration_adv.h +++ b/config/examples/Index/REV_03/Configuration_adv.h @@ -1603,7 +1603,7 @@ * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. * This will prevent position updates from being displayed. */ - #if ENABLED(U8GLIB_ST7920) + #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. //#define DOGM_SPI_DELAY_US 5 diff --git a/config/examples/Infitary/i3-M508/Configuration.h b/config/examples/Infitary/i3-M508/Configuration.h index 2d1cce2112..2adb90a8cd 100644 --- a/config/examples/Infitary/i3-M508/Configuration.h +++ b/config/examples/Infitary/i3-M508/Configuration.h @@ -2376,6 +2376,11 @@ //#define VIKI2 //#define miniVIKI +// +// Alfawise Ex8 printer LCD marked as WYH L12864 COG +// +//#define WYH_L12864 + // // MakerLab Mini Panel with graphic // controller and SD support - https://reprap.org/wiki/Mini_panel diff --git a/config/examples/Infitary/i3-M508/Configuration_adv.h b/config/examples/Infitary/i3-M508/Configuration_adv.h index 40e639fa14..51bed45edc 100644 --- a/config/examples/Infitary/i3-M508/Configuration_adv.h +++ b/config/examples/Infitary/i3-M508/Configuration_adv.h @@ -1603,7 +1603,7 @@ * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. * This will prevent position updates from being displayed. */ - #if ENABLED(U8GLIB_ST7920) + #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. //#define DOGM_SPI_DELAY_US 5 diff --git a/config/examples/Intamsys/FunmatHT 4988/Configuration.h b/config/examples/Intamsys/FunmatHT 4988/Configuration.h index 72ecf12f95..06d42629e9 100644 --- a/config/examples/Intamsys/FunmatHT 4988/Configuration.h +++ b/config/examples/Intamsys/FunmatHT 4988/Configuration.h @@ -2376,6 +2376,11 @@ //#define VIKI2 //#define miniVIKI +// +// Alfawise Ex8 printer LCD marked as WYH L12864 COG +// +//#define WYH_L12864 + // // MakerLab Mini Panel with graphic // controller and SD support - https://reprap.org/wiki/Mini_panel diff --git a/config/examples/Intamsys/FunmatHT 4988/Configuration_adv.h b/config/examples/Intamsys/FunmatHT 4988/Configuration_adv.h index 825b8754d3..df9762cc70 100644 --- a/config/examples/Intamsys/FunmatHT 4988/Configuration_adv.h +++ b/config/examples/Intamsys/FunmatHT 4988/Configuration_adv.h @@ -1602,7 +1602,7 @@ * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. * This will prevent position updates from being displayed. */ - #if ENABLED(U8GLIB_ST7920) + #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. //#define DOGM_SPI_DELAY_US 5 diff --git a/config/examples/JGAurora/A1/Configuration.h b/config/examples/JGAurora/A1/Configuration.h index 49406a8199..8dba4f2749 100644 --- a/config/examples/JGAurora/A1/Configuration.h +++ b/config/examples/JGAurora/A1/Configuration.h @@ -2381,6 +2381,11 @@ //#define VIKI2 //#define miniVIKI +// +// Alfawise Ex8 printer LCD marked as WYH L12864 COG +// +//#define WYH_L12864 + // // MakerLab Mini Panel with graphic // controller and SD support - https://reprap.org/wiki/Mini_panel diff --git a/config/examples/JGAurora/A1/Configuration_adv.h b/config/examples/JGAurora/A1/Configuration_adv.h index a8830d6174..dbaf896282 100644 --- a/config/examples/JGAurora/A1/Configuration_adv.h +++ b/config/examples/JGAurora/A1/Configuration_adv.h @@ -1608,7 +1608,7 @@ * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. * This will prevent position updates from being displayed. */ - #if ENABLED(U8GLIB_ST7920) + #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. //#define DOGM_SPI_DELAY_US 5 diff --git a/config/examples/JGAurora/A3/Configuration.h b/config/examples/JGAurora/A3/Configuration.h index 8aca27497e..fc9552c1a3 100644 --- a/config/examples/JGAurora/A3/Configuration.h +++ b/config/examples/JGAurora/A3/Configuration.h @@ -2376,6 +2376,11 @@ //#define VIKI2 //#define miniVIKI +// +// Alfawise Ex8 printer LCD marked as WYH L12864 COG +// +//#define WYH_L12864 + // // MakerLab Mini Panel with graphic // controller and SD support - https://reprap.org/wiki/Mini_panel diff --git a/config/examples/JGAurora/A5/Configuration.h b/config/examples/JGAurora/A5/Configuration.h index ce6eb11ae2..3efe090aad 100644 --- a/config/examples/JGAurora/A5/Configuration.h +++ b/config/examples/JGAurora/A5/Configuration.h @@ -2384,6 +2384,11 @@ //#define VIKI2 //#define miniVIKI +// +// Alfawise Ex8 printer LCD marked as WYH L12864 COG +// +//#define WYH_L12864 + // // MakerLab Mini Panel with graphic // controller and SD support - https://reprap.org/wiki/Mini_panel diff --git a/config/examples/JGAurora/A5/Configuration_adv.h b/config/examples/JGAurora/A5/Configuration_adv.h index a4c725b451..01755595c3 100644 --- a/config/examples/JGAurora/A5/Configuration_adv.h +++ b/config/examples/JGAurora/A5/Configuration_adv.h @@ -1603,7 +1603,7 @@ * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. * This will prevent position updates from being displayed. */ - #if ENABLED(U8GLIB_ST7920) + #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. //#define DOGM_SPI_DELAY_US 5 diff --git a/config/examples/JGAurora/A5S/Configuration.h b/config/examples/JGAurora/A5S/Configuration.h index a0cb723b74..b55fa723ad 100644 --- a/config/examples/JGAurora/A5S/Configuration.h +++ b/config/examples/JGAurora/A5S/Configuration.h @@ -2381,6 +2381,11 @@ //#define VIKI2 //#define miniVIKI +// +// Alfawise Ex8 printer LCD marked as WYH L12864 COG +// +//#define WYH_L12864 + // // MakerLab Mini Panel with graphic // controller and SD support - https://reprap.org/wiki/Mini_panel diff --git a/config/examples/JGAurora/A5S/Configuration_adv.h b/config/examples/JGAurora/A5S/Configuration_adv.h index a8830d6174..dbaf896282 100644 --- a/config/examples/JGAurora/A5S/Configuration_adv.h +++ b/config/examples/JGAurora/A5S/Configuration_adv.h @@ -1608,7 +1608,7 @@ * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. * This will prevent position updates from being displayed. */ - #if ENABLED(U8GLIB_ST7920) + #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. //#define DOGM_SPI_DELAY_US 5 diff --git a/config/examples/JGAurora/Magic/Configuration.h b/config/examples/JGAurora/Magic/Configuration.h index 4e2325359e..d24ad453d7 100644 --- a/config/examples/JGAurora/Magic/Configuration.h +++ b/config/examples/JGAurora/Magic/Configuration.h @@ -2376,6 +2376,11 @@ //#define VIKI2 //#define miniVIKI +// +// Alfawise Ex8 printer LCD marked as WYH L12864 COG +// +//#define WYH_L12864 + // // MakerLab Mini Panel with graphic // controller and SD support - https://reprap.org/wiki/Mini_panel diff --git a/config/examples/JGAurora/Magic/Configuration_adv.h b/config/examples/JGAurora/Magic/Configuration_adv.h index 20dad11e3a..eafb1536cf 100644 --- a/config/examples/JGAurora/Magic/Configuration_adv.h +++ b/config/examples/JGAurora/Magic/Configuration_adv.h @@ -1603,7 +1603,7 @@ * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. * This will prevent position updates from being displayed. */ - #if ENABLED(U8GLIB_ST7920) + #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. //#define DOGM_SPI_DELAY_US 5 diff --git a/config/examples/Kingroon/KP3/Configuration.h b/config/examples/Kingroon/KP3/Configuration.h index c2c5fc745e..7b084f34ca 100644 --- a/config/examples/Kingroon/KP3/Configuration.h +++ b/config/examples/Kingroon/KP3/Configuration.h @@ -2376,6 +2376,11 @@ //#define VIKI2 //#define miniVIKI +// +// Alfawise Ex8 printer LCD marked as WYH L12864 COG +// +//#define WYH_L12864 + // // MakerLab Mini Panel with graphic // controller and SD support - https://reprap.org/wiki/Mini_panel diff --git a/config/examples/Kingroon/KP3/Configuration_adv.h b/config/examples/Kingroon/KP3/Configuration_adv.h index 654e1527e3..6e1fcba3b6 100644 --- a/config/examples/Kingroon/KP3/Configuration_adv.h +++ b/config/examples/Kingroon/KP3/Configuration_adv.h @@ -1603,7 +1603,7 @@ * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. * This will prevent position updates from being displayed. */ - #if ENABLED(U8GLIB_ST7920) + #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. //#define DOGM_SPI_DELAY_US 5 diff --git a/config/examples/Labists/ET4/Configuration.h b/config/examples/Labists/ET4/Configuration.h index 3bc8f50318..3fd0604c15 100644 --- a/config/examples/Labists/ET4/Configuration.h +++ b/config/examples/Labists/ET4/Configuration.h @@ -2388,6 +2388,11 @@ //#define VIKI2 //#define miniVIKI +// +// Alfawise Ex8 printer LCD marked as WYH L12864 COG +// +//#define WYH_L12864 + // // MakerLab Mini Panel with graphic // controller and SD support - https://reprap.org/wiki/Mini_panel diff --git a/config/examples/Labists/ET4/Configuration_adv.h b/config/examples/Labists/ET4/Configuration_adv.h index bd9d2db2ad..8a6fa5ef71 100644 --- a/config/examples/Labists/ET4/Configuration_adv.h +++ b/config/examples/Labists/ET4/Configuration_adv.h @@ -1603,7 +1603,7 @@ * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. * This will prevent position updates from being displayed. */ - #if ENABLED(U8GLIB_ST7920) + #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. //#define DOGM_SPI_DELAY_US 5 diff --git a/config/examples/LulzBot/TAZ4/Configuration.h b/config/examples/LulzBot/TAZ4/Configuration.h index ae20257bbd..6fe7d55f5e 100644 --- a/config/examples/LulzBot/TAZ4/Configuration.h +++ b/config/examples/LulzBot/TAZ4/Configuration.h @@ -2387,6 +2387,11 @@ //#define VIKI2 //#define miniVIKI +// +// Alfawise Ex8 printer LCD marked as WYH L12864 COG +// +//#define WYH_L12864 + // // MakerLab Mini Panel with graphic // controller and SD support - https://reprap.org/wiki/Mini_panel diff --git a/config/examples/LulzBot/TAZ4/Configuration_adv.h b/config/examples/LulzBot/TAZ4/Configuration_adv.h index 1d81eb1aa5..8cdcb831d3 100644 --- a/config/examples/LulzBot/TAZ4/Configuration_adv.h +++ b/config/examples/LulzBot/TAZ4/Configuration_adv.h @@ -1603,7 +1603,7 @@ * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. * This will prevent position updates from being displayed. */ - #if ENABLED(U8GLIB_ST7920) + #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. //#define DOGM_SPI_DELAY_US 5 diff --git a/config/examples/MBot/Cube/Configuration.h b/config/examples/MBot/Cube/Configuration.h index 45eaec1658..bf3b6de242 100644 --- a/config/examples/MBot/Cube/Configuration.h +++ b/config/examples/MBot/Cube/Configuration.h @@ -2377,6 +2377,11 @@ //#define VIKI2 //#define miniVIKI +// +// Alfawise Ex8 printer LCD marked as WYH L12864 COG +// +//#define WYH_L12864 + // // MakerLab Mini Panel with graphic // controller and SD support - https://reprap.org/wiki/Mini_panel diff --git a/config/examples/MBot/Cube/Configuration_adv.h b/config/examples/MBot/Cube/Configuration_adv.h index dde43a1af9..c43c960ba2 100644 --- a/config/examples/MBot/Cube/Configuration_adv.h +++ b/config/examples/MBot/Cube/Configuration_adv.h @@ -1603,7 +1603,7 @@ * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. * This will prevent position updates from being displayed. */ - #if ENABLED(U8GLIB_ST7920) + #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. //#define DOGM_SPI_DELAY_US 5 diff --git a/config/examples/MakerFarm/Pegasus 12/Configuration.h b/config/examples/MakerFarm/Pegasus 12/Configuration.h index b15d309b38..f5f95533b2 100644 --- a/config/examples/MakerFarm/Pegasus 12/Configuration.h +++ b/config/examples/MakerFarm/Pegasus 12/Configuration.h @@ -2382,6 +2382,11 @@ //#define VIKI2 //#define miniVIKI +// +// Alfawise Ex8 printer LCD marked as WYH L12864 COG +// +//#define WYH_L12864 + // // MakerLab Mini Panel with graphic // controller and SD support - https://reprap.org/wiki/Mini_panel diff --git a/config/examples/MakerFarm/Pegasus 12/Configuration_adv.h b/config/examples/MakerFarm/Pegasus 12/Configuration_adv.h index 240ea097d9..37d71a02d5 100644 --- a/config/examples/MakerFarm/Pegasus 12/Configuration_adv.h +++ b/config/examples/MakerFarm/Pegasus 12/Configuration_adv.h @@ -1603,7 +1603,7 @@ * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. * This will prevent position updates from being displayed. */ - #if ENABLED(U8GLIB_ST7920) + #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. //#define DOGM_SPI_DELAY_US 5 diff --git a/config/examples/MakerParts/Configuration.h b/config/examples/MakerParts/Configuration.h index b593ff780b..4c741c1c09 100644 --- a/config/examples/MakerParts/Configuration.h +++ b/config/examples/MakerParts/Configuration.h @@ -2376,6 +2376,11 @@ //#define VIKI2 //#define miniVIKI +// +// Alfawise Ex8 printer LCD marked as WYH L12864 COG +// +//#define WYH_L12864 + // // MakerLab Mini Panel with graphic // controller and SD support - https://reprap.org/wiki/Mini_panel diff --git a/config/examples/MakerParts/Configuration_adv.h b/config/examples/MakerParts/Configuration_adv.h index 814aab33bf..3ebe0a44f7 100644 --- a/config/examples/MakerParts/Configuration_adv.h +++ b/config/examples/MakerParts/Configuration_adv.h @@ -1603,7 +1603,7 @@ * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. * This will prevent position updates from being displayed. */ - #if ENABLED(U8GLIB_ST7920) + #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. //#define DOGM_SPI_DELAY_US 5 diff --git a/config/examples/Malyan/M150/Configuration.h b/config/examples/Malyan/M150/Configuration.h index 26984b0c18..9bb5bb2f02 100644 --- a/config/examples/Malyan/M150/Configuration.h +++ b/config/examples/Malyan/M150/Configuration.h @@ -2404,6 +2404,11 @@ //#define VIKI2 //#define miniVIKI +// +// Alfawise Ex8 printer LCD marked as WYH L12864 COG +// +//#define WYH_L12864 + // // MakerLab Mini Panel with graphic // controller and SD support - https://reprap.org/wiki/Mini_panel diff --git a/config/examples/Malyan/M150/Configuration_adv.h b/config/examples/Malyan/M150/Configuration_adv.h index e895bfa6d8..75010a41a3 100644 --- a/config/examples/Malyan/M150/Configuration_adv.h +++ b/config/examples/Malyan/M150/Configuration_adv.h @@ -1603,7 +1603,7 @@ * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. * This will prevent position updates from being displayed. */ - #if ENABLED(U8GLIB_ST7920) + #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. //#define DOGM_SPI_DELAY_US 5 diff --git a/config/examples/Malyan/M180/Configuration.h b/config/examples/Malyan/M180/Configuration.h index 2088a63504..17f1c09efd 100644 --- a/config/examples/Malyan/M180/Configuration.h +++ b/config/examples/Malyan/M180/Configuration.h @@ -2377,6 +2377,11 @@ //#define VIKI2 //#define miniVIKI +// +// Alfawise Ex8 printer LCD marked as WYH L12864 COG +// +//#define WYH_L12864 + // // MakerLab Mini Panel with graphic // controller and SD support - https://reprap.org/wiki/Mini_panel diff --git a/config/examples/Malyan/M200/Configuration.h b/config/examples/Malyan/M200/Configuration.h index aaa1e7b767..6c586e5a05 100644 --- a/config/examples/Malyan/M200/Configuration.h +++ b/config/examples/Malyan/M200/Configuration.h @@ -2382,6 +2382,11 @@ //#define VIKI2 //#define miniVIKI +// +// Alfawise Ex8 printer LCD marked as WYH L12864 COG +// +//#define WYH_L12864 + // // MakerLab Mini Panel with graphic // controller and SD support - https://reprap.org/wiki/Mini_panel diff --git a/config/examples/Malyan/M200/Configuration_adv.h b/config/examples/Malyan/M200/Configuration_adv.h index 104b1034b2..2b644311e5 100644 --- a/config/examples/Malyan/M200/Configuration_adv.h +++ b/config/examples/Malyan/M200/Configuration_adv.h @@ -1605,7 +1605,7 @@ * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. * This will prevent position updates from being displayed. */ - #if ENABLED(U8GLIB_ST7920) + #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. //#define DOGM_SPI_DELAY_US 5 diff --git a/config/examples/Micromake/C1/basic/Configuration.h b/config/examples/Micromake/C1/basic/Configuration.h index 62bf5f7146..ebe77e0bfb 100644 --- a/config/examples/Micromake/C1/basic/Configuration.h +++ b/config/examples/Micromake/C1/basic/Configuration.h @@ -2380,6 +2380,11 @@ //#define VIKI2 //#define miniVIKI +// +// Alfawise Ex8 printer LCD marked as WYH L12864 COG +// +//#define WYH_L12864 + // // MakerLab Mini Panel with graphic // controller and SD support - https://reprap.org/wiki/Mini_panel diff --git a/config/examples/Micromake/C1/enhanced/Configuration.h b/config/examples/Micromake/C1/enhanced/Configuration.h index 5f3cf78326..a00c5efdfb 100644 --- a/config/examples/Micromake/C1/enhanced/Configuration.h +++ b/config/examples/Micromake/C1/enhanced/Configuration.h @@ -2380,6 +2380,11 @@ //#define VIKI2 //#define miniVIKI +// +// Alfawise Ex8 printer LCD marked as WYH L12864 COG +// +//#define WYH_L12864 + // // MakerLab Mini Panel with graphic // controller and SD support - https://reprap.org/wiki/Mini_panel diff --git a/config/examples/Micromake/C1/enhanced/Configuration_adv.h b/config/examples/Micromake/C1/enhanced/Configuration_adv.h index 7afe60c7e1..253b6362d4 100644 --- a/config/examples/Micromake/C1/enhanced/Configuration_adv.h +++ b/config/examples/Micromake/C1/enhanced/Configuration_adv.h @@ -1603,7 +1603,7 @@ * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. * This will prevent position updates from being displayed. */ - #if ENABLED(U8GLIB_ST7920) + #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. //#define DOGM_SPI_DELAY_US 5 diff --git a/config/examples/Mks/Robin/Configuration.h b/config/examples/Mks/Robin/Configuration.h index 7a3b562cb0..7bfc97f319 100644 --- a/config/examples/Mks/Robin/Configuration.h +++ b/config/examples/Mks/Robin/Configuration.h @@ -2377,6 +2377,11 @@ //#define VIKI2 //#define miniVIKI +// +// Alfawise Ex8 printer LCD marked as WYH L12864 COG +// +//#define WYH_L12864 + // // MakerLab Mini Panel with graphic // controller and SD support - https://reprap.org/wiki/Mini_panel diff --git a/config/examples/Mks/Robin/Configuration_adv.h b/config/examples/Mks/Robin/Configuration_adv.h index 63b768cfea..4a9eabfac2 100644 --- a/config/examples/Mks/Robin/Configuration_adv.h +++ b/config/examples/Mks/Robin/Configuration_adv.h @@ -1603,7 +1603,7 @@ * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. * This will prevent position updates from being displayed. */ - #if ENABLED(U8GLIB_ST7920) + #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. //#define DOGM_SPI_DELAY_US 5 diff --git a/config/examples/Mks/Robin_Lite3/Configuration.h b/config/examples/Mks/Robin_Lite3/Configuration.h index 0b6b1ab58b..c4bdcc34b6 100644 --- a/config/examples/Mks/Robin_Lite3/Configuration.h +++ b/config/examples/Mks/Robin_Lite3/Configuration.h @@ -2383,6 +2383,11 @@ //#define VIKI2 //#define miniVIKI +// +// Alfawise Ex8 printer LCD marked as WYH L12864 COG +// +//#define WYH_L12864 + // // MakerLab Mini Panel with graphic // controller and SD support - https://reprap.org/wiki/Mini_panel diff --git a/config/examples/Mks/Robin_Pro/Configuration.h b/config/examples/Mks/Robin_Pro/Configuration.h index 3583d7329c..b4186d2bbc 100644 --- a/config/examples/Mks/Robin_Pro/Configuration.h +++ b/config/examples/Mks/Robin_Pro/Configuration.h @@ -2378,6 +2378,11 @@ //#define VIKI2 //#define miniVIKI +// +// Alfawise Ex8 printer LCD marked as WYH L12864 COG +// +//#define WYH_L12864 + // // MakerLab Mini Panel with graphic // controller and SD support - https://reprap.org/wiki/Mini_panel diff --git a/config/examples/Mks/Sbase/Configuration.h b/config/examples/Mks/Sbase/Configuration.h index 1889d7fc33..c7aaf442e5 100644 --- a/config/examples/Mks/Sbase/Configuration.h +++ b/config/examples/Mks/Sbase/Configuration.h @@ -2376,6 +2376,11 @@ //#define VIKI2 //#define miniVIKI +// +// Alfawise Ex8 printer LCD marked as WYH L12864 COG +// +//#define WYH_L12864 + // // MakerLab Mini Panel with graphic // controller and SD support - https://reprap.org/wiki/Mini_panel diff --git a/config/examples/Mks/Sbase/Configuration_adv.h b/config/examples/Mks/Sbase/Configuration_adv.h index 12e3d00c02..77c06c0c5e 100644 --- a/config/examples/Mks/Sbase/Configuration_adv.h +++ b/config/examples/Mks/Sbase/Configuration_adv.h @@ -1603,7 +1603,7 @@ * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. * This will prevent position updates from being displayed. */ - #if ENABLED(U8GLIB_ST7920) + #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. //#define DOGM_SPI_DELAY_US 5 diff --git a/config/examples/Modix/Big60/Configuration.h b/config/examples/Modix/Big60/Configuration.h index 722f60ad9f..d0030666fb 100644 --- a/config/examples/Modix/Big60/Configuration.h +++ b/config/examples/Modix/Big60/Configuration.h @@ -2376,6 +2376,11 @@ //#define VIKI2 //#define miniVIKI +// +// Alfawise Ex8 printer LCD marked as WYH L12864 COG +// +//#define WYH_L12864 + // // MakerLab Mini Panel with graphic // controller and SD support - https://reprap.org/wiki/Mini_panel diff --git a/config/examples/Modix/Big60/Configuration_adv.h b/config/examples/Modix/Big60/Configuration_adv.h index ff5559db0f..40b04528d4 100644 --- a/config/examples/Modix/Big60/Configuration_adv.h +++ b/config/examples/Modix/Big60/Configuration_adv.h @@ -1603,7 +1603,7 @@ * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. * This will prevent position updates from being displayed. */ - #if ENABLED(U8GLIB_ST7920) + #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. //#define DOGM_SPI_DELAY_US 5 diff --git a/config/examples/Nextion/Configuration.h b/config/examples/Nextion/Configuration.h index 2f3557896b..8cac855137 100644 --- a/config/examples/Nextion/Configuration.h +++ b/config/examples/Nextion/Configuration.h @@ -2376,6 +2376,11 @@ //#define VIKI2 //#define miniVIKI +// +// Alfawise Ex8 printer LCD marked as WYH L12864 COG +// +//#define WYH_L12864 + // // MakerLab Mini Panel with graphic // controller and SD support - https://reprap.org/wiki/Mini_panel diff --git a/config/examples/Nextion/Configuration_adv.h b/config/examples/Nextion/Configuration_adv.h index 50c8e4e32d..6b54d71733 100644 --- a/config/examples/Nextion/Configuration_adv.h +++ b/config/examples/Nextion/Configuration_adv.h @@ -1603,7 +1603,7 @@ * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. * This will prevent position updates from being displayed. */ - #if ENABLED(U8GLIB_ST7920) + #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. //#define DOGM_SPI_DELAY_US 5 diff --git a/config/examples/Ortur 4/Configuration.h b/config/examples/Ortur 4/Configuration.h index 6679f02bf8..c0da7c3995 100644 --- a/config/examples/Ortur 4/Configuration.h +++ b/config/examples/Ortur 4/Configuration.h @@ -2376,6 +2376,11 @@ //#define VIKI2 //#define miniVIKI +// +// Alfawise Ex8 printer LCD marked as WYH L12864 COG +// +//#define WYH_L12864 + // // MakerLab Mini Panel with graphic // controller and SD support - https://reprap.org/wiki/Mini_panel diff --git a/config/examples/Ortur 4/Configuration_adv.h b/config/examples/Ortur 4/Configuration_adv.h index 7a615b7ea5..cf8467b884 100644 --- a/config/examples/Ortur 4/Configuration_adv.h +++ b/config/examples/Ortur 4/Configuration_adv.h @@ -1603,7 +1603,7 @@ * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. * This will prevent position updates from being displayed. */ - #if ENABLED(U8GLIB_ST7920) + #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. #define DOGM_SPI_DELAY_US 9 diff --git a/config/examples/Polargraph/Configuration.h b/config/examples/Polargraph/Configuration.h index 699947eede..f6f56693bf 100644 --- a/config/examples/Polargraph/Configuration.h +++ b/config/examples/Polargraph/Configuration.h @@ -2380,6 +2380,11 @@ //#define VIKI2 //#define miniVIKI +// +// Alfawise Ex8 printer LCD marked as WYH L12864 COG +// +//#define WYH_L12864 + // // MakerLab Mini Panel with graphic // controller and SD support - https://reprap.org/wiki/Mini_panel diff --git a/config/examples/Polargraph/Configuration_adv.h b/config/examples/Polargraph/Configuration_adv.h index 31e2d6a89c..434550b479 100644 --- a/config/examples/Polargraph/Configuration_adv.h +++ b/config/examples/Polargraph/Configuration_adv.h @@ -1603,7 +1603,7 @@ * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. * This will prevent position updates from being displayed. */ - #if ENABLED(U8GLIB_ST7920) + #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. //#define DOGM_SPI_DELAY_US 5 diff --git a/config/examples/Printrbot/PrintrboardG2/Configuration.h b/config/examples/Printrbot/PrintrboardG2/Configuration.h index 745a8b9e5b..270fa3fad9 100644 --- a/config/examples/Printrbot/PrintrboardG2/Configuration.h +++ b/config/examples/Printrbot/PrintrboardG2/Configuration.h @@ -2378,6 +2378,11 @@ //#define VIKI2 //#define miniVIKI +// +// Alfawise Ex8 printer LCD marked as WYH L12864 COG +// +//#define WYH_L12864 + // // MakerLab Mini Panel with graphic // controller and SD support - https://reprap.org/wiki/Mini_panel diff --git a/config/examples/Printrbot/Simple Metal RevD/Configuration.h b/config/examples/Printrbot/Simple Metal RevD/Configuration.h index 278adc7f42..8ac847e715 100644 --- a/config/examples/Printrbot/Simple Metal RevD/Configuration.h +++ b/config/examples/Printrbot/Simple Metal RevD/Configuration.h @@ -2376,6 +2376,11 @@ //#define VIKI2 //#define miniVIKI +// +// Alfawise Ex8 printer LCD marked as WYH L12864 COG +// +//#define WYH_L12864 + // // MakerLab Mini Panel with graphic // controller and SD support - https://reprap.org/wiki/Mini_panel diff --git a/config/examples/Prusa/MK3/Configuration.h b/config/examples/Prusa/MK3/Configuration.h index 771bf1963c..7181eef827 100644 --- a/config/examples/Prusa/MK3/Configuration.h +++ b/config/examples/Prusa/MK3/Configuration.h @@ -2433,6 +2433,11 @@ //#define VIKI2 //#define miniVIKI +// +// Alfawise Ex8 printer LCD marked as WYH L12864 COG +// +//#define WYH_L12864 + // // MakerLab Mini Panel with graphic // controller and SD support - https://reprap.org/wiki/Mini_panel diff --git a/config/examples/Prusa/MK3/Configuration_adv.h b/config/examples/Prusa/MK3/Configuration_adv.h index 4fe1a7bff1..918293568e 100644 --- a/config/examples/Prusa/MK3/Configuration_adv.h +++ b/config/examples/Prusa/MK3/Configuration_adv.h @@ -1603,7 +1603,7 @@ * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. * This will prevent position updates from being displayed. */ - #if ENABLED(U8GLIB_ST7920) + #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. //#define DOGM_SPI_DELAY_US 5 diff --git a/config/examples/Prusa/MK3S-BigTreeTech-BTT002/Configuration.h b/config/examples/Prusa/MK3S-BigTreeTech-BTT002/Configuration.h index e468029b8a..e845b51947 100644 --- a/config/examples/Prusa/MK3S-BigTreeTech-BTT002/Configuration.h +++ b/config/examples/Prusa/MK3S-BigTreeTech-BTT002/Configuration.h @@ -2376,6 +2376,11 @@ //#define VIKI2 //#define miniVIKI +// +// Alfawise Ex8 printer LCD marked as WYH L12864 COG +// +//#define WYH_L12864 + // // MakerLab Mini Panel with graphic // controller and SD support - https://reprap.org/wiki/Mini_panel diff --git a/config/examples/Prusa/MK3S-BigTreeTech-BTT002/Configuration_adv.h b/config/examples/Prusa/MK3S-BigTreeTech-BTT002/Configuration_adv.h index 45edf89024..d8642b549e 100644 --- a/config/examples/Prusa/MK3S-BigTreeTech-BTT002/Configuration_adv.h +++ b/config/examples/Prusa/MK3S-BigTreeTech-BTT002/Configuration_adv.h @@ -1603,7 +1603,7 @@ * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. * This will prevent position updates from being displayed. */ - #if ENABLED(U8GLIB_ST7920) + #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. //#define DOGM_SPI_DELAY_US 5 diff --git a/config/examples/Qidi/Qidi 1/Configuration.h b/config/examples/Qidi/Qidi 1/Configuration.h index b1cda2f7a7..26115b822a 100644 --- a/config/examples/Qidi/Qidi 1/Configuration.h +++ b/config/examples/Qidi/Qidi 1/Configuration.h @@ -2379,6 +2379,11 @@ //#define VIKI2 //#define miniVIKI +// +// Alfawise Ex8 printer LCD marked as WYH L12864 COG +// +//#define WYH_L12864 + // // MakerLab Mini Panel with graphic // controller and SD support - https://reprap.org/wiki/Mini_panel diff --git a/config/examples/Qidi/Qidi 1/Configuration_adv.h b/config/examples/Qidi/Qidi 1/Configuration_adv.h index c40b677363..a87f4dfbb9 100644 --- a/config/examples/Qidi/Qidi 1/Configuration_adv.h +++ b/config/examples/Qidi/Qidi 1/Configuration_adv.h @@ -1603,7 +1603,7 @@ * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. * This will prevent position updates from being displayed. */ - #if ENABLED(U8GLIB_ST7920) + #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. //#define DOGM_SPI_DELAY_US 5 diff --git a/config/examples/Raiscube/A8r/Configuration.h b/config/examples/Raiscube/A8r/Configuration.h index 38cdf59337..58959f3e98 100644 --- a/config/examples/Raiscube/A8r/Configuration.h +++ b/config/examples/Raiscube/A8r/Configuration.h @@ -2420,6 +2420,11 @@ //#define VIKI2 //#define miniVIKI +// +// Alfawise Ex8 printer LCD marked as WYH L12864 COG +// +//#define WYH_L12864 + // // MakerLab Mini Panel with graphic // controller and SD support - https://reprap.org/wiki/Mini_panel diff --git a/config/examples/Raiscube/A8r/Configuration_adv.h b/config/examples/Raiscube/A8r/Configuration_adv.h index 59ac21fb67..ce6cc407d0 100644 --- a/config/examples/Raiscube/A8r/Configuration_adv.h +++ b/config/examples/Raiscube/A8r/Configuration_adv.h @@ -1603,7 +1603,7 @@ * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. * This will prevent position updates from being displayed. */ - #if ENABLED(U8GLIB_ST7920) + #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. //#define DOGM_SPI_DELAY_US 5 diff --git a/config/examples/RapideLite/RL200/Configuration.h b/config/examples/RapideLite/RL200/Configuration.h index 3debc129a6..c2bba34577 100644 --- a/config/examples/RapideLite/RL200/Configuration.h +++ b/config/examples/RapideLite/RL200/Configuration.h @@ -2376,6 +2376,11 @@ //#define VIKI2 //#define miniVIKI +// +// Alfawise Ex8 printer LCD marked as WYH L12864 COG +// +//#define WYH_L12864 + // // MakerLab Mini Panel with graphic // controller and SD support - https://reprap.org/wiki/Mini_panel diff --git a/config/examples/RapideLite/RL200/Configuration_adv.h b/config/examples/RapideLite/RL200/Configuration_adv.h index af2f5d4e98..423e09ab1c 100644 --- a/config/examples/RapideLite/RL200/Configuration_adv.h +++ b/config/examples/RapideLite/RL200/Configuration_adv.h @@ -1603,7 +1603,7 @@ * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. * This will prevent position updates from being displayed. */ - #if ENABLED(U8GLIB_ST7920) + #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. //#define DOGM_SPI_DELAY_US 5 diff --git a/config/examples/Renkforce/RF100/Configuration.h b/config/examples/Renkforce/RF100/Configuration.h index 56e1b57784..6f65e03639 100644 --- a/config/examples/Renkforce/RF100/Configuration.h +++ b/config/examples/Renkforce/RF100/Configuration.h @@ -2380,6 +2380,11 @@ //#define VIKI2 //#define miniVIKI +// +// Alfawise Ex8 printer LCD marked as WYH L12864 COG +// +//#define WYH_L12864 + // // MakerLab Mini Panel with graphic // controller and SD support - https://reprap.org/wiki/Mini_panel diff --git a/config/examples/Renkforce/RF100/Configuration_adv.h b/config/examples/Renkforce/RF100/Configuration_adv.h index 8a69cde4ba..50bf781127 100644 --- a/config/examples/Renkforce/RF100/Configuration_adv.h +++ b/config/examples/Renkforce/RF100/Configuration_adv.h @@ -1603,7 +1603,7 @@ * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. * This will prevent position updates from being displayed. */ - #if ENABLED(U8GLIB_ST7920) + #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. //#define DOGM_SPI_DELAY_US 5 diff --git a/config/examples/Renkforce/RF100XL/Configuration.h b/config/examples/Renkforce/RF100XL/Configuration.h index 20253a60ac..6bdf5ded8e 100644 --- a/config/examples/Renkforce/RF100XL/Configuration.h +++ b/config/examples/Renkforce/RF100XL/Configuration.h @@ -2380,6 +2380,11 @@ //#define VIKI2 //#define miniVIKI +// +// Alfawise Ex8 printer LCD marked as WYH L12864 COG +// +//#define WYH_L12864 + // // MakerLab Mini Panel with graphic // controller and SD support - https://reprap.org/wiki/Mini_panel diff --git a/config/examples/Renkforce/RF100XL/Configuration_adv.h b/config/examples/Renkforce/RF100XL/Configuration_adv.h index 8a69cde4ba..50bf781127 100644 --- a/config/examples/Renkforce/RF100XL/Configuration_adv.h +++ b/config/examples/Renkforce/RF100XL/Configuration_adv.h @@ -1603,7 +1603,7 @@ * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. * This will prevent position updates from being displayed. */ - #if ENABLED(U8GLIB_ST7920) + #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. //#define DOGM_SPI_DELAY_US 5 diff --git a/config/examples/Renkforce/RF100v2/Configuration.h b/config/examples/Renkforce/RF100v2/Configuration.h index 71789852fd..7ccc07f955 100644 --- a/config/examples/Renkforce/RF100v2/Configuration.h +++ b/config/examples/Renkforce/RF100v2/Configuration.h @@ -2380,6 +2380,11 @@ //#define VIKI2 //#define miniVIKI +// +// Alfawise Ex8 printer LCD marked as WYH L12864 COG +// +//#define WYH_L12864 + // // MakerLab Mini Panel with graphic // controller and SD support - https://reprap.org/wiki/Mini_panel diff --git a/config/examples/Renkforce/RF100v2/Configuration_adv.h b/config/examples/Renkforce/RF100v2/Configuration_adv.h index 8a69cde4ba..50bf781127 100644 --- a/config/examples/Renkforce/RF100v2/Configuration_adv.h +++ b/config/examples/Renkforce/RF100v2/Configuration_adv.h @@ -1603,7 +1603,7 @@ * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. * This will prevent position updates from being displayed. */ - #if ENABLED(U8GLIB_ST7920) + #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. //#define DOGM_SPI_DELAY_US 5 diff --git a/config/examples/RepRapPro/Huxley/Configuration.h b/config/examples/RepRapPro/Huxley/Configuration.h index e061586b1a..fcd13ed235 100644 --- a/config/examples/RepRapPro/Huxley/Configuration.h +++ b/config/examples/RepRapPro/Huxley/Configuration.h @@ -2426,6 +2426,11 @@ //#define VIKI2 //#define miniVIKI +// +// Alfawise Ex8 printer LCD marked as WYH L12864 COG +// +//#define WYH_L12864 + // // MakerLab Mini Panel with graphic // controller and SD support - https://reprap.org/wiki/Mini_panel diff --git a/config/examples/RepRapWorld/Megatronics/Configuration.h b/config/examples/RepRapWorld/Megatronics/Configuration.h index 2cca75a22b..4142822fc4 100644 --- a/config/examples/RepRapWorld/Megatronics/Configuration.h +++ b/config/examples/RepRapWorld/Megatronics/Configuration.h @@ -2376,6 +2376,11 @@ //#define VIKI2 //#define miniVIKI +// +// Alfawise Ex8 printer LCD marked as WYH L12864 COG +// +//#define WYH_L12864 + // // MakerLab Mini Panel with graphic // controller and SD support - https://reprap.org/wiki/Mini_panel diff --git a/config/examples/RigidBot/Configuration.h b/config/examples/RigidBot/Configuration.h index 83e35886d9..5340d0bead 100644 --- a/config/examples/RigidBot/Configuration.h +++ b/config/examples/RigidBot/Configuration.h @@ -2393,6 +2393,11 @@ //#define VIKI2 //#define miniVIKI +// +// Alfawise Ex8 printer LCD marked as WYH L12864 COG +// +//#define WYH_L12864 + // // MakerLab Mini Panel with graphic // controller and SD support - https://reprap.org/wiki/Mini_panel diff --git a/config/examples/RigidBot/Configuration_adv.h b/config/examples/RigidBot/Configuration_adv.h index 03a610a029..ceabf2dadd 100644 --- a/config/examples/RigidBot/Configuration_adv.h +++ b/config/examples/RigidBot/Configuration_adv.h @@ -1603,7 +1603,7 @@ * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. * This will prevent position updates from being displayed. */ - #if ENABLED(U8GLIB_ST7920) + #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. //#define DOGM_SPI_DELAY_US 5 diff --git a/config/examples/Robo3D/R1+/Configuration.h b/config/examples/Robo3D/R1+/Configuration.h index b5bf0e12eb..2df1adb125 100644 --- a/config/examples/Robo3D/R1+/Configuration.h +++ b/config/examples/Robo3D/R1+/Configuration.h @@ -2376,6 +2376,11 @@ //#define VIKI2 //#define miniVIKI +// +// Alfawise Ex8 printer LCD marked as WYH L12864 COG +// +//#define WYH_L12864 + // // MakerLab Mini Panel with graphic // controller and SD support - https://reprap.org/wiki/Mini_panel diff --git a/config/examples/SCARA/MP_SCARA/Configuration.h b/config/examples/SCARA/MP_SCARA/Configuration.h index b8f207bf1f..7444825d38 100644 --- a/config/examples/SCARA/MP_SCARA/Configuration.h +++ b/config/examples/SCARA/MP_SCARA/Configuration.h @@ -2422,6 +2422,11 @@ //#define VIKI2 //#define miniVIKI +// +// Alfawise Ex8 printer LCD marked as WYH L12864 COG +// +//#define WYH_L12864 + // // MakerLab Mini Panel with graphic // controller and SD support - https://reprap.org/wiki/Mini_panel diff --git a/config/examples/SCARA/MP_SCARA/Configuration_adv.h b/config/examples/SCARA/MP_SCARA/Configuration_adv.h index 6c83286d42..15af326720 100644 --- a/config/examples/SCARA/MP_SCARA/Configuration_adv.h +++ b/config/examples/SCARA/MP_SCARA/Configuration_adv.h @@ -1600,7 +1600,7 @@ * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. * This will prevent position updates from being displayed. */ - #if ENABLED(U8GLIB_ST7920) + #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. //#define DOGM_SPI_DELAY_US 5 diff --git a/config/examples/SCARA/Morgan/Configuration.h b/config/examples/SCARA/Morgan/Configuration.h index 2ed179b3e3..672c3f461b 100644 --- a/config/examples/SCARA/Morgan/Configuration.h +++ b/config/examples/SCARA/Morgan/Configuration.h @@ -2422,6 +2422,11 @@ //#define VIKI2 //#define miniVIKI +// +// Alfawise Ex8 printer LCD marked as WYH L12864 COG +// +//#define WYH_L12864 + // // MakerLab Mini Panel with graphic // controller and SD support - https://reprap.org/wiki/Mini_panel diff --git a/config/examples/SCARA/Morgan/Configuration_adv.h b/config/examples/SCARA/Morgan/Configuration_adv.h index 365f5ddfd3..b8d37ee147 100644 --- a/config/examples/SCARA/Morgan/Configuration_adv.h +++ b/config/examples/SCARA/Morgan/Configuration_adv.h @@ -1600,7 +1600,7 @@ * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. * This will prevent position updates from being displayed. */ - #if ENABLED(U8GLIB_ST7920) + #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. //#define DOGM_SPI_DELAY_US 5 diff --git a/config/examples/STM32/Black_STM32F407VET6/Configuration.h b/config/examples/STM32/Black_STM32F407VET6/Configuration.h index 7b85a3750e..229cd15586 100644 --- a/config/examples/STM32/Black_STM32F407VET6/Configuration.h +++ b/config/examples/STM32/Black_STM32F407VET6/Configuration.h @@ -2376,6 +2376,11 @@ //#define VIKI2 //#define miniVIKI +// +// Alfawise Ex8 printer LCD marked as WYH L12864 COG +// +//#define WYH_L12864 + // // MakerLab Mini Panel with graphic // controller and SD support - https://reprap.org/wiki/Mini_panel diff --git a/config/examples/STM32/Black_STM32F407VET6/Configuration_adv.h b/config/examples/STM32/Black_STM32F407VET6/Configuration_adv.h index c6d5388cf7..9ec074f5ed 100644 --- a/config/examples/STM32/Black_STM32F407VET6/Configuration_adv.h +++ b/config/examples/STM32/Black_STM32F407VET6/Configuration_adv.h @@ -1603,7 +1603,7 @@ * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. * This will prevent position updates from being displayed. */ - #if ENABLED(U8GLIB_ST7920) + #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. //#define DOGM_SPI_DELAY_US 5 diff --git a/config/examples/STM32/STM32F103RE/Configuration.h b/config/examples/STM32/STM32F103RE/Configuration.h index e52eb678dd..a373d5049f 100644 --- a/config/examples/STM32/STM32F103RE/Configuration.h +++ b/config/examples/STM32/STM32F103RE/Configuration.h @@ -2378,6 +2378,11 @@ //#define VIKI2 //#define miniVIKI +// +// Alfawise Ex8 printer LCD marked as WYH L12864 COG +// +//#define WYH_L12864 + // // MakerLab Mini Panel with graphic // controller and SD support - https://reprap.org/wiki/Mini_panel diff --git a/config/examples/STM32/STM32F4/Configuration.h b/config/examples/STM32/STM32F4/Configuration.h index 87a7b4c42f..942b0b6ab6 100644 --- a/config/examples/STM32/STM32F4/Configuration.h +++ b/config/examples/STM32/STM32F4/Configuration.h @@ -2376,6 +2376,11 @@ //#define VIKI2 //#define miniVIKI +// +// Alfawise Ex8 printer LCD marked as WYH L12864 COG +// +//#define WYH_L12864 + // // MakerLab Mini Panel with graphic // controller and SD support - https://reprap.org/wiki/Mini_panel diff --git a/config/examples/Sanguinololu/Configuration.h b/config/examples/Sanguinololu/Configuration.h index 508b64eab5..d01ada3975 100644 --- a/config/examples/Sanguinololu/Configuration.h +++ b/config/examples/Sanguinololu/Configuration.h @@ -2407,6 +2407,11 @@ //#define VIKI2 //#define miniVIKI +// +// Alfawise Ex8 printer LCD marked as WYH L12864 COG +// +//#define WYH_L12864 + // // MakerLab Mini Panel with graphic // controller and SD support - https://reprap.org/wiki/Mini_panel diff --git a/config/examples/Sanguinololu/Configuration_adv.h b/config/examples/Sanguinololu/Configuration_adv.h index af5f819ce8..26aaa06725 100644 --- a/config/examples/Sanguinololu/Configuration_adv.h +++ b/config/examples/Sanguinololu/Configuration_adv.h @@ -1603,7 +1603,7 @@ * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. * This will prevent position updates from being displayed. */ - #if ENABLED(U8GLIB_ST7920) + #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. //#define DOGM_SPI_DELAY_US 5 diff --git a/config/examples/Simulator/Configuration.h b/config/examples/Simulator/Configuration.h index 95bd06b1b7..2aa336971c 100644 --- a/config/examples/Simulator/Configuration.h +++ b/config/examples/Simulator/Configuration.h @@ -2377,6 +2377,11 @@ //#define VIKI2 //#define miniVIKI +// +// Alfawise Ex8 printer LCD marked as WYH L12864 COG +// +//#define WYH_L12864 + // // MakerLab Mini Panel with graphic // controller and SD support - https://reprap.org/wiki/Mini_panel diff --git a/config/examples/Simulator/Configuration_adv.h b/config/examples/Simulator/Configuration_adv.h index a3b9c3fc73..93a64ae56d 100644 --- a/config/examples/Simulator/Configuration_adv.h +++ b/config/examples/Simulator/Configuration_adv.h @@ -1603,7 +1603,7 @@ * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. * This will prevent position updates from being displayed. */ - #if ENABLED(U8GLIB_ST7920) + #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. //#define DOGM_SPI_DELAY_US 5 diff --git a/config/examples/Sovol/SV-01/BigTreeTech SKR E3 Turbo/Configuration.h b/config/examples/Sovol/SV-01/BigTreeTech SKR E3 Turbo/Configuration.h index 5203eea996..80e409d375 100644 --- a/config/examples/Sovol/SV-01/BigTreeTech SKR E3 Turbo/Configuration.h +++ b/config/examples/Sovol/SV-01/BigTreeTech SKR E3 Turbo/Configuration.h @@ -2380,6 +2380,11 @@ //#define VIKI2 //#define miniVIKI +// +// Alfawise Ex8 printer LCD marked as WYH L12864 COG +// +//#define WYH_L12864 + // // MakerLab Mini Panel with graphic // controller and SD support - https://reprap.org/wiki/Mini_panel diff --git a/config/examples/Sovol/SV-01/BigTreeTech SKR E3 Turbo/Configuration_adv.h b/config/examples/Sovol/SV-01/BigTreeTech SKR E3 Turbo/Configuration_adv.h index 8da71e3415..bf57c122f4 100644 --- a/config/examples/Sovol/SV-01/BigTreeTech SKR E3 Turbo/Configuration_adv.h +++ b/config/examples/Sovol/SV-01/BigTreeTech SKR E3 Turbo/Configuration_adv.h @@ -1607,7 +1607,7 @@ * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. * This will prevent position updates from being displayed. */ - #if ENABLED(U8GLIB_ST7920) + #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. //#define DOGM_SPI_DELAY_US 5 diff --git a/config/examples/Sovol/SV-01/BigTreeTech SKR Mini E3 2.0/Configuration.h b/config/examples/Sovol/SV-01/BigTreeTech SKR Mini E3 2.0/Configuration.h index 2a06c01d1f..c862dd3bb4 100644 --- a/config/examples/Sovol/SV-01/BigTreeTech SKR Mini E3 2.0/Configuration.h +++ b/config/examples/Sovol/SV-01/BigTreeTech SKR Mini E3 2.0/Configuration.h @@ -2377,6 +2377,11 @@ //#define VIKI2 //#define miniVIKI +// +// Alfawise Ex8 printer LCD marked as WYH L12864 COG +// +//#define WYH_L12864 + // // MakerLab Mini Panel with graphic // controller and SD support - https://reprap.org/wiki/Mini_panel diff --git a/config/examples/Sovol/SV-01/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h b/config/examples/Sovol/SV-01/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h index a4226aacc6..4fe7aa8462 100644 --- a/config/examples/Sovol/SV-01/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h +++ b/config/examples/Sovol/SV-01/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h @@ -1603,7 +1603,7 @@ * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. * This will prevent position updates from being displayed. */ - #if ENABLED(U8GLIB_ST7920) + #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. //#define DOGM_SPI_DELAY_US 5 diff --git a/config/examples/Sovol/SV-01/CrealityV22/Configuration.h b/config/examples/Sovol/SV-01/CrealityV22/Configuration.h index d539547572..a45e6cda70 100644 --- a/config/examples/Sovol/SV-01/CrealityV22/Configuration.h +++ b/config/examples/Sovol/SV-01/CrealityV22/Configuration.h @@ -2377,6 +2377,11 @@ //#define VIKI2 //#define miniVIKI +// +// Alfawise Ex8 printer LCD marked as WYH L12864 COG +// +//#define WYH_L12864 + // // MakerLab Mini Panel with graphic // controller and SD support - https://reprap.org/wiki/Mini_panel diff --git a/config/examples/Sovol/SV-01/CrealityV22/Configuration_adv.h b/config/examples/Sovol/SV-01/CrealityV22/Configuration_adv.h index ed3446603d..293ea7fa63 100644 --- a/config/examples/Sovol/SV-01/CrealityV22/Configuration_adv.h +++ b/config/examples/Sovol/SV-01/CrealityV22/Configuration_adv.h @@ -1603,7 +1603,7 @@ * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. * This will prevent position updates from being displayed. */ - #if ENABLED(U8GLIB_ST7920) + #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. //#define DOGM_SPI_DELAY_US 5 diff --git a/config/examples/Sovol/SV-01/CrealityV221/Configuration.h b/config/examples/Sovol/SV-01/CrealityV221/Configuration.h index fcf7fac625..f53771c65f 100644 --- a/config/examples/Sovol/SV-01/CrealityV221/Configuration.h +++ b/config/examples/Sovol/SV-01/CrealityV221/Configuration.h @@ -2377,6 +2377,11 @@ //#define VIKI2 //#define miniVIKI +// +// Alfawise Ex8 printer LCD marked as WYH L12864 COG +// +//#define WYH_L12864 + // // MakerLab Mini Panel with graphic // controller and SD support - https://reprap.org/wiki/Mini_panel diff --git a/config/examples/Sovol/SV-01/CrealityV221/Configuration_adv.h b/config/examples/Sovol/SV-01/CrealityV221/Configuration_adv.h index 92c6099d4d..216f3a4d7c 100644 --- a/config/examples/Sovol/SV-01/CrealityV221/Configuration_adv.h +++ b/config/examples/Sovol/SV-01/CrealityV221/Configuration_adv.h @@ -1603,7 +1603,7 @@ * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. * This will prevent position updates from being displayed. */ - #if ENABLED(U8GLIB_ST7920) + #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. //#define DOGM_SPI_DELAY_US 5 diff --git a/config/examples/Sunlu/S8/Configuration.h b/config/examples/Sunlu/S8/Configuration.h index 5e2fc80063..046a41569c 100644 --- a/config/examples/Sunlu/S8/Configuration.h +++ b/config/examples/Sunlu/S8/Configuration.h @@ -2377,6 +2377,11 @@ //#define VIKI2 //#define miniVIKI +// +// Alfawise Ex8 printer LCD marked as WYH L12864 COG +// +//#define WYH_L12864 + // // MakerLab Mini Panel with graphic // controller and SD support - https://reprap.org/wiki/Mini_panel diff --git a/config/examples/Sunlu/S8/Configuration_adv.h b/config/examples/Sunlu/S8/Configuration_adv.h index da5318e148..d1a6c37e60 100644 --- a/config/examples/Sunlu/S8/Configuration_adv.h +++ b/config/examples/Sunlu/S8/Configuration_adv.h @@ -1603,7 +1603,7 @@ * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. * This will prevent position updates from being displayed. */ - #if ENABLED(U8GLIB_ST7920) + #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. //#define DOGM_SPI_DELAY_US 5 diff --git a/config/examples/TPARA/AXEL_TPARA/Configuration.h b/config/examples/TPARA/AXEL_TPARA/Configuration.h index 81e2cfebc5..38d3ce6f3a 100644 --- a/config/examples/TPARA/AXEL_TPARA/Configuration.h +++ b/config/examples/TPARA/AXEL_TPARA/Configuration.h @@ -2402,6 +2402,11 @@ //#define VIKI2 //#define miniVIKI +// +// Alfawise Ex8 printer LCD marked as WYH L12864 COG +// +//#define WYH_L12864 + // // MakerLab Mini Panel with graphic // controller and SD support - https://reprap.org/wiki/Mini_panel diff --git a/config/examples/TPARA/AXEL_TPARA/Configuration_adv.h b/config/examples/TPARA/AXEL_TPARA/Configuration_adv.h index 3d1340db8e..c81ed16249 100644 --- a/config/examples/TPARA/AXEL_TPARA/Configuration_adv.h +++ b/config/examples/TPARA/AXEL_TPARA/Configuration_adv.h @@ -1603,7 +1603,7 @@ * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. * This will prevent position updates from being displayed. */ - #if ENABLED(U8GLIB_ST7920) + #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. //#define DOGM_SPI_DELAY_US 5 diff --git a/config/examples/Tevo/Michelangelo/Configuration.h b/config/examples/Tevo/Michelangelo/Configuration.h index fd2a6cd389..b3a5af1ed2 100644 --- a/config/examples/Tevo/Michelangelo/Configuration.h +++ b/config/examples/Tevo/Michelangelo/Configuration.h @@ -2377,6 +2377,11 @@ //#define VIKI2 //#define miniVIKI +// +// Alfawise Ex8 printer LCD marked as WYH L12864 COG +// +//#define WYH_L12864 + // // MakerLab Mini Panel with graphic // controller and SD support - https://reprap.org/wiki/Mini_panel diff --git a/config/examples/Tevo/Michelangelo/Configuration_adv.h b/config/examples/Tevo/Michelangelo/Configuration_adv.h index 3bbd78319f..b8de8e5453 100644 --- a/config/examples/Tevo/Michelangelo/Configuration_adv.h +++ b/config/examples/Tevo/Michelangelo/Configuration_adv.h @@ -1603,7 +1603,7 @@ * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. * This will prevent position updates from being displayed. */ - #if ENABLED(U8GLIB_ST7920) + #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. //#define DOGM_SPI_DELAY_US 5 diff --git a/config/examples/Tevo/Nereus/Configuration.h b/config/examples/Tevo/Nereus/Configuration.h index 3008aa7304..2711f84ff2 100644 --- a/config/examples/Tevo/Nereus/Configuration.h +++ b/config/examples/Tevo/Nereus/Configuration.h @@ -2377,6 +2377,11 @@ //#define VIKI2 //#define miniVIKI +// +// Alfawise Ex8 printer LCD marked as WYH L12864 COG +// +//#define WYH_L12864 + // // MakerLab Mini Panel with graphic // controller and SD support - https://reprap.org/wiki/Mini_panel diff --git a/config/examples/Tevo/Nereus/Configuration_adv.h b/config/examples/Tevo/Nereus/Configuration_adv.h index fef4b066d2..44af14d991 100644 --- a/config/examples/Tevo/Nereus/Configuration_adv.h +++ b/config/examples/Tevo/Nereus/Configuration_adv.h @@ -1603,7 +1603,7 @@ * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. * This will prevent position updates from being displayed. */ - #if ENABLED(U8GLIB_ST7920) + #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. //#define DOGM_SPI_DELAY_US 5 diff --git a/config/examples/Tevo/Tarantula Pro/Configuration.h b/config/examples/Tevo/Tarantula Pro/Configuration.h index 800137be28..da00260c50 100644 --- a/config/examples/Tevo/Tarantula Pro/Configuration.h +++ b/config/examples/Tevo/Tarantula Pro/Configuration.h @@ -2377,6 +2377,11 @@ //#define VIKI2 //#define miniVIKI +// +// Alfawise Ex8 printer LCD marked as WYH L12864 COG +// +//#define WYH_L12864 + // // MakerLab Mini Panel with graphic // controller and SD support - https://reprap.org/wiki/Mini_panel diff --git a/config/examples/Tevo/Tarantula Pro/Configuration_adv.h b/config/examples/Tevo/Tarantula Pro/Configuration_adv.h index ac28bab9c3..fc08a359d6 100644 --- a/config/examples/Tevo/Tarantula Pro/Configuration_adv.h +++ b/config/examples/Tevo/Tarantula Pro/Configuration_adv.h @@ -1603,7 +1603,7 @@ * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. * This will prevent position updates from being displayed. */ - #if ENABLED(U8GLIB_ST7920) + #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. //#define DOGM_SPI_DELAY_US 5 diff --git a/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration.h b/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration.h index 1a2bd03e68..d341bc65ef 100644 --- a/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration.h +++ b/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration.h @@ -2377,6 +2377,11 @@ //#define VIKI2 //#define miniVIKI +// +// Alfawise Ex8 printer LCD marked as WYH L12864 COG +// +//#define WYH_L12864 + // // MakerLab Mini Panel with graphic // controller and SD support - https://reprap.org/wiki/Mini_panel diff --git a/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration_adv.h b/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration_adv.h index 83f3691c6f..37e5013daa 100644 --- a/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration_adv.h +++ b/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration_adv.h @@ -1603,7 +1603,7 @@ * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. * This will prevent position updates from being displayed. */ - #if ENABLED(U8GLIB_ST7920) + #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. //#define DOGM_SPI_DELAY_US 5 diff --git a/config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration.h b/config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration.h index f1f4bde9c0..620e15619a 100644 --- a/config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration.h +++ b/config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration.h @@ -2380,6 +2380,11 @@ //#define VIKI2 //#define miniVIKI +// +// Alfawise Ex8 printer LCD marked as WYH L12864 COG +// +//#define WYH_L12864 + // // MakerLab Mini Panel with graphic // controller and SD support - https://reprap.org/wiki/Mini_panel diff --git a/config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration_adv.h b/config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration_adv.h index 83f3691c6f..37e5013daa 100644 --- a/config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration_adv.h +++ b/config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration_adv.h @@ -1603,7 +1603,7 @@ * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. * This will prevent position updates from being displayed. */ - #if ENABLED(U8GLIB_ST7920) + #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. //#define DOGM_SPI_DELAY_US 5 diff --git a/config/examples/TheBorg/Configuration.h b/config/examples/TheBorg/Configuration.h index 48aa5600f2..c0649c38c9 100644 --- a/config/examples/TheBorg/Configuration.h +++ b/config/examples/TheBorg/Configuration.h @@ -2376,6 +2376,11 @@ //#define VIKI2 //#define miniVIKI +// +// Alfawise Ex8 printer LCD marked as WYH L12864 COG +// +//#define WYH_L12864 + // // MakerLab Mini Panel with graphic // controller and SD support - https://reprap.org/wiki/Mini_panel diff --git a/config/examples/TheBorg/Configuration_adv.h b/config/examples/TheBorg/Configuration_adv.h index 3506ce41b8..086659f7ee 100644 --- a/config/examples/TheBorg/Configuration_adv.h +++ b/config/examples/TheBorg/Configuration_adv.h @@ -1603,7 +1603,7 @@ * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. * This will prevent position updates from being displayed. */ - #if ENABLED(U8GLIB_ST7920) + #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. //#define DOGM_SPI_DELAY_US 5 diff --git a/config/examples/TinyBoy2/Configuration.h b/config/examples/TinyBoy2/Configuration.h index 567d36223a..4ea79abd9b 100644 --- a/config/examples/TinyBoy2/Configuration.h +++ b/config/examples/TinyBoy2/Configuration.h @@ -2422,6 +2422,11 @@ //#define VIKI2 //#define miniVIKI +// +// Alfawise Ex8 printer LCD marked as WYH L12864 COG +// +//#define WYH_L12864 + // // MakerLab Mini Panel with graphic // controller and SD support - https://reprap.org/wiki/Mini_panel diff --git a/config/examples/TinyBoy2/Configuration_adv.h b/config/examples/TinyBoy2/Configuration_adv.h index 7f142f51fa..774fc78ba3 100644 --- a/config/examples/TinyBoy2/Configuration_adv.h +++ b/config/examples/TinyBoy2/Configuration_adv.h @@ -1603,7 +1603,7 @@ * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. * This will prevent position updates from being displayed. */ - #if ENABLED(U8GLIB_ST7920) + #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. //#define DOGM_SPI_DELAY_US 5 diff --git a/config/examples/Tronxy/X1/Configuration.h b/config/examples/Tronxy/X1/Configuration.h index 61421ced7a..e98535b942 100644 --- a/config/examples/Tronxy/X1/Configuration.h +++ b/config/examples/Tronxy/X1/Configuration.h @@ -2377,6 +2377,11 @@ //#define VIKI2 //#define miniVIKI +// +// Alfawise Ex8 printer LCD marked as WYH L12864 COG +// +//#define WYH_L12864 + // // MakerLab Mini Panel with graphic // controller and SD support - https://reprap.org/wiki/Mini_panel diff --git a/config/examples/Tronxy/X3A/Configuration.h b/config/examples/Tronxy/X3A/Configuration.h index 11af5b7258..aff84d2559 100644 --- a/config/examples/Tronxy/X3A/Configuration.h +++ b/config/examples/Tronxy/X3A/Configuration.h @@ -2380,6 +2380,11 @@ //#define VIKI2 //#define miniVIKI +// +// Alfawise Ex8 printer LCD marked as WYH L12864 COG +// +//#define WYH_L12864 + // // MakerLab Mini Panel with graphic // controller and SD support - https://reprap.org/wiki/Mini_panel diff --git a/config/examples/Tronxy/X3A/Configuration_adv.h b/config/examples/Tronxy/X3A/Configuration_adv.h index de1c2c733b..e465eb0133 100644 --- a/config/examples/Tronxy/X3A/Configuration_adv.h +++ b/config/examples/Tronxy/X3A/Configuration_adv.h @@ -1603,7 +1603,7 @@ * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. * This will prevent position updates from being displayed. */ - #if ENABLED(U8GLIB_ST7920) + #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. //#define DOGM_SPI_DELAY_US 5 diff --git a/config/examples/Tronxy/X5S-2E/Configuration.h b/config/examples/Tronxy/X5S-2E/Configuration.h index b809974d1d..1cbdd7bf89 100644 --- a/config/examples/Tronxy/X5S-2E/Configuration.h +++ b/config/examples/Tronxy/X5S-2E/Configuration.h @@ -2385,6 +2385,11 @@ //#define VIKI2 //#define miniVIKI +// +// Alfawise Ex8 printer LCD marked as WYH L12864 COG +// +//#define WYH_L12864 + // // MakerLab Mini Panel with graphic // controller and SD support - https://reprap.org/wiki/Mini_panel diff --git a/config/examples/Tronxy/X5S-2E/Configuration_adv.h b/config/examples/Tronxy/X5S-2E/Configuration_adv.h index d77b35f3c9..fd0307153d 100644 --- a/config/examples/Tronxy/X5S-2E/Configuration_adv.h +++ b/config/examples/Tronxy/X5S-2E/Configuration_adv.h @@ -1603,7 +1603,7 @@ * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. * This will prevent position updates from being displayed. */ - #if ENABLED(U8GLIB_ST7920) + #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. //#define DOGM_SPI_DELAY_US 5 diff --git a/config/examples/Tronxy/X5S/Configuration.h b/config/examples/Tronxy/X5S/Configuration.h index 96b8b37240..8265d5303e 100644 --- a/config/examples/Tronxy/X5S/Configuration.h +++ b/config/examples/Tronxy/X5S/Configuration.h @@ -2376,6 +2376,11 @@ //#define VIKI2 //#define miniVIKI +// +// Alfawise Ex8 printer LCD marked as WYH L12864 COG +// +//#define WYH_L12864 + // // MakerLab Mini Panel with graphic // controller and SD support - https://reprap.org/wiki/Mini_panel diff --git a/config/examples/Tronxy/X5SA-2E/Configuration.h b/config/examples/Tronxy/X5SA-2E/Configuration.h index d4d7677ce4..1a2a1718a0 100644 --- a/config/examples/Tronxy/X5SA-2E/Configuration.h +++ b/config/examples/Tronxy/X5SA-2E/Configuration.h @@ -2379,6 +2379,11 @@ //#define VIKI2 //#define miniVIKI +// +// Alfawise Ex8 printer LCD marked as WYH L12864 COG +// +//#define WYH_L12864 + // // MakerLab Mini Panel with graphic // controller and SD support - https://reprap.org/wiki/Mini_panel diff --git a/config/examples/Tronxy/X5SA-2E/Configuration_adv.h b/config/examples/Tronxy/X5SA-2E/Configuration_adv.h index be4427bf6b..c70bfdf088 100644 --- a/config/examples/Tronxy/X5SA-2E/Configuration_adv.h +++ b/config/examples/Tronxy/X5SA-2E/Configuration_adv.h @@ -1603,7 +1603,7 @@ * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. * This will prevent position updates from being displayed. */ - #if ENABLED(U8GLIB_ST7920) + #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. //#define DOGM_SPI_DELAY_US 5 diff --git a/config/examples/Tronxy/X5SA/Configuration.h b/config/examples/Tronxy/X5SA/Configuration.h index f2ee10aeaf..faead849b3 100644 --- a/config/examples/Tronxy/X5SA/Configuration.h +++ b/config/examples/Tronxy/X5SA/Configuration.h @@ -2378,6 +2378,11 @@ //#define VIKI2 //#define miniVIKI +// +// Alfawise Ex8 printer LCD marked as WYH L12864 COG +// +//#define WYH_L12864 + // // MakerLab Mini Panel with graphic // controller and SD support - https://reprap.org/wiki/Mini_panel diff --git a/config/examples/Tronxy/X5SA/Configuration_adv.h b/config/examples/Tronxy/X5SA/Configuration_adv.h index dc4a5b3ae0..c5b2cea9bc 100644 --- a/config/examples/Tronxy/X5SA/Configuration_adv.h +++ b/config/examples/Tronxy/X5SA/Configuration_adv.h @@ -1603,7 +1603,7 @@ * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. * This will prevent position updates from being displayed. */ - #if ENABLED(U8GLIB_ST7920) + #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. //#define DOGM_SPI_DELAY_US 5 diff --git a/config/examples/Tronxy/XY100/Configuration.h b/config/examples/Tronxy/XY100/Configuration.h index 97f9485d9f..c3ea04ff93 100644 --- a/config/examples/Tronxy/XY100/Configuration.h +++ b/config/examples/Tronxy/XY100/Configuration.h @@ -2383,6 +2383,11 @@ //#define VIKI2 //#define miniVIKI +// +// Alfawise Ex8 printer LCD marked as WYH L12864 COG +// +//#define WYH_L12864 + // // MakerLab Mini Panel with graphic // controller and SD support - https://reprap.org/wiki/Mini_panel diff --git a/config/examples/Two Trees/BlueR Plus/Configuration.h b/config/examples/Two Trees/BlueR Plus/Configuration.h index 913ebba090..ec981a6cd0 100644 --- a/config/examples/Two Trees/BlueR Plus/Configuration.h +++ b/config/examples/Two Trees/BlueR Plus/Configuration.h @@ -2380,6 +2380,11 @@ //#define VIKI2 //#define miniVIKI +// +// Alfawise Ex8 printer LCD marked as WYH L12864 COG +// +//#define WYH_L12864 + // // MakerLab Mini Panel with graphic // controller and SD support - https://reprap.org/wiki/Mini_panel diff --git a/config/examples/Two Trees/BlueR Plus/Configuration_adv.h b/config/examples/Two Trees/BlueR Plus/Configuration_adv.h index 4e6a147eeb..dd567b0c0b 100644 --- a/config/examples/Two Trees/BlueR Plus/Configuration_adv.h +++ b/config/examples/Two Trees/BlueR Plus/Configuration_adv.h @@ -1603,7 +1603,7 @@ * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. * This will prevent position updates from being displayed. */ - #if ENABLED(U8GLIB_ST7920) + #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. //#define DOGM_SPI_DELAY_US 5 diff --git a/config/examples/Two Trees/BlueR/BlueR V1/Configuration.h b/config/examples/Two Trees/BlueR/BlueR V1/Configuration.h index ba2c0f0393..ada53fd54b 100644 --- a/config/examples/Two Trees/BlueR/BlueR V1/Configuration.h +++ b/config/examples/Two Trees/BlueR/BlueR V1/Configuration.h @@ -2410,6 +2410,11 @@ //#define VIKI2 //#define miniVIKI +// +// Alfawise Ex8 printer LCD marked as WYH L12864 COG +// +//#define WYH_L12864 + // // MakerLab Mini Panel with graphic // controller and SD support - https://reprap.org/wiki/Mini_panel diff --git a/config/examples/Two Trees/BlueR/BlueR V1/Configuration_adv.h b/config/examples/Two Trees/BlueR/BlueR V1/Configuration_adv.h index b686bf7587..a17b9afdea 100644 --- a/config/examples/Two Trees/BlueR/BlueR V1/Configuration_adv.h +++ b/config/examples/Two Trees/BlueR/BlueR V1/Configuration_adv.h @@ -1603,7 +1603,7 @@ * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. * This will prevent position updates from being displayed. */ - #if ENABLED(U8GLIB_ST7920) + #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. //#define DOGM_SPI_DELAY_US 5 diff --git a/config/examples/Two Trees/BlueR/BlueR V2/Configuration.h b/config/examples/Two Trees/BlueR/BlueR V2/Configuration.h index 70d9938e75..224b388683 100644 --- a/config/examples/Two Trees/BlueR/BlueR V2/Configuration.h +++ b/config/examples/Two Trees/BlueR/BlueR V2/Configuration.h @@ -2415,6 +2415,11 @@ //#define VIKI2 //#define miniVIKI +// +// Alfawise Ex8 printer LCD marked as WYH L12864 COG +// +//#define WYH_L12864 + // // MakerLab Mini Panel with graphic // controller and SD support - https://reprap.org/wiki/Mini_panel diff --git a/config/examples/Two Trees/BlueR/BlueR V2/Configuration_adv.h b/config/examples/Two Trees/BlueR/BlueR V2/Configuration_adv.h index b686bf7587..a17b9afdea 100644 --- a/config/examples/Two Trees/BlueR/BlueR V2/Configuration_adv.h +++ b/config/examples/Two Trees/BlueR/BlueR V2/Configuration_adv.h @@ -1603,7 +1603,7 @@ * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. * This will prevent position updates from being displayed. */ - #if ENABLED(U8GLIB_ST7920) + #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. //#define DOGM_SPI_DELAY_US 5 diff --git a/config/examples/Two Trees/BlueR/BlueR V3/Configuration.h b/config/examples/Two Trees/BlueR/BlueR V3/Configuration.h index 2327dbb41d..16572a2394 100644 --- a/config/examples/Two Trees/BlueR/BlueR V3/Configuration.h +++ b/config/examples/Two Trees/BlueR/BlueR V3/Configuration.h @@ -2414,6 +2414,11 @@ //#define VIKI2 //#define miniVIKI +// +// Alfawise Ex8 printer LCD marked as WYH L12864 COG +// +//#define WYH_L12864 + // // MakerLab Mini Panel with graphic // controller and SD support - https://reprap.org/wiki/Mini_panel diff --git a/config/examples/Two Trees/BlueR/BlueR V3/Configuration_adv.h b/config/examples/Two Trees/BlueR/BlueR V3/Configuration_adv.h index b686bf7587..a17b9afdea 100644 --- a/config/examples/Two Trees/BlueR/BlueR V3/Configuration_adv.h +++ b/config/examples/Two Trees/BlueR/BlueR V3/Configuration_adv.h @@ -1603,7 +1603,7 @@ * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. * This will prevent position updates from being displayed. */ - #if ENABLED(U8GLIB_ST7920) + #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. //#define DOGM_SPI_DELAY_US 5 diff --git a/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2/Configuration.h b/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2/Configuration.h index 87a4aa4644..74f5d4a6bf 100644 --- a/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2/Configuration.h +++ b/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2/Configuration.h @@ -2418,6 +2418,11 @@ //#define VIKI2 //#define miniVIKI +// +// Alfawise Ex8 printer LCD marked as WYH L12864 COG +// +//#define WYH_L12864 + // // MakerLab Mini Panel with graphic // controller and SD support - https://reprap.org/wiki/Mini_panel diff --git a/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2/Configuration_adv.h b/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2/Configuration_adv.h index a5a56075f6..0955aa17f8 100644 --- a/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2/Configuration_adv.h +++ b/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2/Configuration_adv.h @@ -1609,7 +1609,7 @@ * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. * This will prevent position updates from being displayed. */ - #if ENABLED(U8GLIB_ST7920) + #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. //#define DOGM_SPI_DELAY_US 5 diff --git a/config/examples/Two Trees/Sapphire Pro/Configuration.h b/config/examples/Two Trees/Sapphire Pro/Configuration.h index a0f2ddb354..2a6188bf65 100644 --- a/config/examples/Two Trees/Sapphire Pro/Configuration.h +++ b/config/examples/Two Trees/Sapphire Pro/Configuration.h @@ -2413,6 +2413,11 @@ //#define VIKI2 //#define miniVIKI +// +// Alfawise Ex8 printer LCD marked as WYH L12864 COG +// +//#define WYH_L12864 + // // MakerLab Mini Panel with graphic // controller and SD support - https://reprap.org/wiki/Mini_panel diff --git a/config/examples/Two Trees/Sapphire Pro/Configuration_adv.h b/config/examples/Two Trees/Sapphire Pro/Configuration_adv.h index 57e35e92be..607ce73398 100644 --- a/config/examples/Two Trees/Sapphire Pro/Configuration_adv.h +++ b/config/examples/Two Trees/Sapphire Pro/Configuration_adv.h @@ -1603,7 +1603,7 @@ * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. * This will prevent position updates from being displayed. */ - #if ENABLED(U8GLIB_ST7920) + #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. //#define DOGM_SPI_DELAY_US 5 diff --git a/config/examples/UltiMachine/Archim1/Configuration.h b/config/examples/UltiMachine/Archim1/Configuration.h index 2b734c005e..585dd0344c 100644 --- a/config/examples/UltiMachine/Archim1/Configuration.h +++ b/config/examples/UltiMachine/Archim1/Configuration.h @@ -2376,6 +2376,11 @@ //#define VIKI2 //#define miniVIKI +// +// Alfawise Ex8 printer LCD marked as WYH L12864 COG +// +//#define WYH_L12864 + // // MakerLab Mini Panel with graphic // controller and SD support - https://reprap.org/wiki/Mini_panel diff --git a/config/examples/UltiMachine/Archim1/Configuration_adv.h b/config/examples/UltiMachine/Archim1/Configuration_adv.h index b69e1327c9..dd7b41c951 100644 --- a/config/examples/UltiMachine/Archim1/Configuration_adv.h +++ b/config/examples/UltiMachine/Archim1/Configuration_adv.h @@ -1603,7 +1603,7 @@ * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. * This will prevent position updates from being displayed. */ - #if ENABLED(U8GLIB_ST7920) + #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. //#define DOGM_SPI_DELAY_US 5 diff --git a/config/examples/UltiMachine/Archim2/Configuration.h b/config/examples/UltiMachine/Archim2/Configuration.h index 9cd9656b9c..6974b5eb8b 100644 --- a/config/examples/UltiMachine/Archim2/Configuration.h +++ b/config/examples/UltiMachine/Archim2/Configuration.h @@ -2376,6 +2376,11 @@ //#define VIKI2 //#define miniVIKI +// +// Alfawise Ex8 printer LCD marked as WYH L12864 COG +// +//#define WYH_L12864 + // // MakerLab Mini Panel with graphic // controller and SD support - https://reprap.org/wiki/Mini_panel diff --git a/config/examples/UltiMachine/Archim2/Configuration_adv.h b/config/examples/UltiMachine/Archim2/Configuration_adv.h index f6de713ef1..132b131646 100644 --- a/config/examples/UltiMachine/Archim2/Configuration_adv.h +++ b/config/examples/UltiMachine/Archim2/Configuration_adv.h @@ -1603,7 +1603,7 @@ * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. * This will prevent position updates from being displayed. */ - #if ENABLED(U8GLIB_ST7920) + #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. //#define DOGM_SPI_DELAY_US 5 diff --git a/config/examples/Ultimaker/Ultimaker Original (1.5.7)/Configuration.h b/config/examples/Ultimaker/Ultimaker Original (1.5.7)/Configuration.h index 0f53c0dbe8..b51b367112 100644 --- a/config/examples/Ultimaker/Ultimaker Original (1.5.7)/Configuration.h +++ b/config/examples/Ultimaker/Ultimaker Original (1.5.7)/Configuration.h @@ -2376,6 +2376,11 @@ //#define VIKI2 //#define miniVIKI +// +// Alfawise Ex8 printer LCD marked as WYH L12864 COG +// +//#define WYH_L12864 + // // MakerLab Mini Panel with graphic // controller and SD support - https://reprap.org/wiki/Mini_panel diff --git a/config/examples/Ultimaker/Ultimaker Original (1.5.7)/Configuration_adv.h b/config/examples/Ultimaker/Ultimaker Original (1.5.7)/Configuration_adv.h index d961a64c4c..b719a109dc 100644 --- a/config/examples/Ultimaker/Ultimaker Original (1.5.7)/Configuration_adv.h +++ b/config/examples/Ultimaker/Ultimaker Original (1.5.7)/Configuration_adv.h @@ -1603,7 +1603,7 @@ * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. * This will prevent position updates from being displayed. */ - #if ENABLED(U8GLIB_ST7920) + #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. //#define DOGM_SPI_DELAY_US 5 diff --git a/config/examples/Ultimaker/Ultimaker Original Plus (2.1.1)/Configuration.h b/config/examples/Ultimaker/Ultimaker Original Plus (2.1.1)/Configuration.h index 7ae121f3ad..0d82f1e8f4 100644 --- a/config/examples/Ultimaker/Ultimaker Original Plus (2.1.1)/Configuration.h +++ b/config/examples/Ultimaker/Ultimaker Original Plus (2.1.1)/Configuration.h @@ -2379,6 +2379,11 @@ //#define VIKI2 //#define miniVIKI +// +// Alfawise Ex8 printer LCD marked as WYH L12864 COG +// +//#define WYH_L12864 + // // MakerLab Mini Panel with graphic // controller and SD support - https://reprap.org/wiki/Mini_panel diff --git a/config/examples/Ultimaker/Ultimaker Original Plus (2.1.1)/Configuration_adv.h b/config/examples/Ultimaker/Ultimaker Original Plus (2.1.1)/Configuration_adv.h index f462f3beb0..0551e0a850 100644 --- a/config/examples/Ultimaker/Ultimaker Original Plus (2.1.1)/Configuration_adv.h +++ b/config/examples/Ultimaker/Ultimaker Original Plus (2.1.1)/Configuration_adv.h @@ -1603,7 +1603,7 @@ * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. * This will prevent position updates from being displayed. */ - #if ENABLED(U8GLIB_ST7920) + #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. //#define DOGM_SPI_DELAY_US 5 diff --git a/config/examples/VORONDesign/Configuration.h b/config/examples/VORONDesign/Configuration.h index 13c59f814f..b5509c22a0 100644 --- a/config/examples/VORONDesign/Configuration.h +++ b/config/examples/VORONDesign/Configuration.h @@ -2376,6 +2376,11 @@ //#define VIKI2 //#define miniVIKI +// +// Alfawise Ex8 printer LCD marked as WYH L12864 COG +// +//#define WYH_L12864 + // // MakerLab Mini Panel with graphic // controller and SD support - https://reprap.org/wiki/Mini_panel diff --git a/config/examples/VORONDesign/Configuration_adv.h b/config/examples/VORONDesign/Configuration_adv.h index f94a64c9ca..a2d9da74e1 100644 --- a/config/examples/VORONDesign/Configuration_adv.h +++ b/config/examples/VORONDesign/Configuration_adv.h @@ -1603,7 +1603,7 @@ * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. * This will prevent position updates from being displayed. */ - #if ENABLED(U8GLIB_ST7920) + #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. //#define DOGM_SPI_DELAY_US 5 diff --git a/config/examples/Velleman/K8200/Configuration.h b/config/examples/Velleman/K8200/Configuration.h index 0811bebcfa..c9a060dd44 100644 --- a/config/examples/Velleman/K8200/Configuration.h +++ b/config/examples/Velleman/K8200/Configuration.h @@ -2400,6 +2400,11 @@ //#define VIKI2 //#define miniVIKI +// +// Alfawise Ex8 printer LCD marked as WYH L12864 COG +// +//#define WYH_L12864 + // // MakerLab Mini Panel with graphic // controller and SD support - https://reprap.org/wiki/Mini_panel diff --git a/config/examples/Velleman/K8200/Configuration_adv.h b/config/examples/Velleman/K8200/Configuration_adv.h index b287e9a21a..6e32f329da 100644 --- a/config/examples/Velleman/K8200/Configuration_adv.h +++ b/config/examples/Velleman/K8200/Configuration_adv.h @@ -1616,7 +1616,7 @@ * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. * This will prevent position updates from being displayed. */ - #if ENABLED(U8GLIB_ST7920) + #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. //#define DOGM_SPI_DELAY_US 5 diff --git a/config/examples/Velleman/K8400/Dual-head/Configuration.h b/config/examples/Velleman/K8400/Dual-head/Configuration.h index 29677ac0c3..ec81651448 100644 --- a/config/examples/Velleman/K8400/Dual-head/Configuration.h +++ b/config/examples/Velleman/K8400/Dual-head/Configuration.h @@ -2377,6 +2377,11 @@ //#define VIKI2 //#define miniVIKI +// +// Alfawise Ex8 printer LCD marked as WYH L12864 COG +// +//#define WYH_L12864 + // // MakerLab Mini Panel with graphic // controller and SD support - https://reprap.org/wiki/Mini_panel diff --git a/config/examples/Velleman/K8400/Dual-head/Configuration_adv.h b/config/examples/Velleman/K8400/Dual-head/Configuration_adv.h index 86f7ddf47c..9d33b3c7c9 100644 --- a/config/examples/Velleman/K8400/Dual-head/Configuration_adv.h +++ b/config/examples/Velleman/K8400/Dual-head/Configuration_adv.h @@ -1603,7 +1603,7 @@ * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. * This will prevent position updates from being displayed. */ - #if ENABLED(U8GLIB_ST7920) + #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. //#define DOGM_SPI_DELAY_US 5 diff --git a/config/examples/Velleman/K8400/Single-head/Configuration.h b/config/examples/Velleman/K8400/Single-head/Configuration.h index 997f32a205..53e94fba5f 100644 --- a/config/examples/Velleman/K8400/Single-head/Configuration.h +++ b/config/examples/Velleman/K8400/Single-head/Configuration.h @@ -2377,6 +2377,11 @@ //#define VIKI2 //#define miniVIKI +// +// Alfawise Ex8 printer LCD marked as WYH L12864 COG +// +//#define WYH_L12864 + // // MakerLab Mini Panel with graphic // controller and SD support - https://reprap.org/wiki/Mini_panel diff --git a/config/examples/Velleman/K8400/Single-head/Configuration_adv.h b/config/examples/Velleman/K8400/Single-head/Configuration_adv.h index 86f7ddf47c..9d33b3c7c9 100644 --- a/config/examples/Velleman/K8400/Single-head/Configuration_adv.h +++ b/config/examples/Velleman/K8400/Single-head/Configuration_adv.h @@ -1603,7 +1603,7 @@ * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. * This will prevent position updates from being displayed. */ - #if ENABLED(U8GLIB_ST7920) + #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. //#define DOGM_SPI_DELAY_US 5 diff --git a/config/examples/WASP/PowerWASP/Configuration.h b/config/examples/WASP/PowerWASP/Configuration.h index 082edafea6..fc5cc83cca 100644 --- a/config/examples/WASP/PowerWASP/Configuration.h +++ b/config/examples/WASP/PowerWASP/Configuration.h @@ -2390,6 +2390,11 @@ //#define VIKI2 //#define miniVIKI +// +// Alfawise Ex8 printer LCD marked as WYH L12864 COG +// +//#define WYH_L12864 + // // MakerLab Mini Panel with graphic // controller and SD support - https://reprap.org/wiki/Mini_panel diff --git a/config/examples/WASP/PowerWASP/Configuration_adv.h b/config/examples/WASP/PowerWASP/Configuration_adv.h index a2ac67595c..1d8c1e9843 100644 --- a/config/examples/WASP/PowerWASP/Configuration_adv.h +++ b/config/examples/WASP/PowerWASP/Configuration_adv.h @@ -1603,7 +1603,7 @@ * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. * This will prevent position updates from being displayed. */ - #if ENABLED(U8GLIB_ST7920) + #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. //#define DOGM_SPI_DELAY_US 5 diff --git a/config/examples/Wanhao/Duplicator 4S/Configuration.h b/config/examples/Wanhao/Duplicator 4S/Configuration.h index 493f306dc4..2bac429412 100644 --- a/config/examples/Wanhao/Duplicator 4S/Configuration.h +++ b/config/examples/Wanhao/Duplicator 4S/Configuration.h @@ -2378,6 +2378,11 @@ //#define VIKI2 //#define miniVIKI +// +// Alfawise Ex8 printer LCD marked as WYH L12864 COG +// +//#define WYH_L12864 + // // MakerLab Mini Panel with graphic // controller and SD support - https://reprap.org/wiki/Mini_panel diff --git a/config/examples/Wanhao/Duplicator 4S/Configuration_adv.h b/config/examples/Wanhao/Duplicator 4S/Configuration_adv.h index a2083ec812..ca3afcdc25 100644 --- a/config/examples/Wanhao/Duplicator 4S/Configuration_adv.h +++ b/config/examples/Wanhao/Duplicator 4S/Configuration_adv.h @@ -1603,7 +1603,7 @@ * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. * This will prevent position updates from being displayed. */ - #if ENABLED(U8GLIB_ST7920) + #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. //#define DOGM_SPI_DELAY_US 5 diff --git a/config/examples/Wanhao/Duplicator 6/Configuration.h b/config/examples/Wanhao/Duplicator 6/Configuration.h index 84fbb859c0..5f29b0941d 100644 --- a/config/examples/Wanhao/Duplicator 6/Configuration.h +++ b/config/examples/Wanhao/Duplicator 6/Configuration.h @@ -2376,6 +2376,11 @@ //#define VIKI2 //#define miniVIKI +// +// Alfawise Ex8 printer LCD marked as WYH L12864 COG +// +//#define WYH_L12864 + // // MakerLab Mini Panel with graphic // controller and SD support - https://reprap.org/wiki/Mini_panel diff --git a/config/examples/Wanhao/Duplicator 6/Configuration_adv.h b/config/examples/Wanhao/Duplicator 6/Configuration_adv.h index 8b73928c93..7cd5dc5421 100644 --- a/config/examples/Wanhao/Duplicator 6/Configuration_adv.h +++ b/config/examples/Wanhao/Duplicator 6/Configuration_adv.h @@ -1605,7 +1605,7 @@ * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. * This will prevent position updates from being displayed. */ - #if ENABLED(U8GLIB_ST7920) + #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. //#define DOGM_SPI_DELAY_US 5 diff --git a/config/examples/Wanhao/Duplicator i3 2.1/Configuration.h b/config/examples/Wanhao/Duplicator i3 2.1/Configuration.h index 8041ff3269..aa1cedb3c8 100644 --- a/config/examples/Wanhao/Duplicator i3 2.1/Configuration.h +++ b/config/examples/Wanhao/Duplicator i3 2.1/Configuration.h @@ -2376,6 +2376,11 @@ //#define VIKI2 //#define miniVIKI +// +// Alfawise Ex8 printer LCD marked as WYH L12864 COG +// +//#define WYH_L12864 + // // MakerLab Mini Panel with graphic // controller and SD support - https://reprap.org/wiki/Mini_panel diff --git a/config/examples/Wanhao/Duplicator i3 2.1/Configuration_adv.h b/config/examples/Wanhao/Duplicator i3 2.1/Configuration_adv.h index 76251beec7..73a4d2b2de 100644 --- a/config/examples/Wanhao/Duplicator i3 2.1/Configuration_adv.h +++ b/config/examples/Wanhao/Duplicator i3 2.1/Configuration_adv.h @@ -1603,7 +1603,7 @@ * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. * This will prevent position updates from being displayed. */ - #if ENABLED(U8GLIB_ST7920) + #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. //#define DOGM_SPI_DELAY_US 5 diff --git a/config/examples/Wanhao/Duplicator i3 Mini/Configuration.h b/config/examples/Wanhao/Duplicator i3 Mini/Configuration.h index eeea403cf8..ab0929de63 100644 --- a/config/examples/Wanhao/Duplicator i3 Mini/Configuration.h +++ b/config/examples/Wanhao/Duplicator i3 Mini/Configuration.h @@ -2377,6 +2377,11 @@ //#define VIKI2 //#define miniVIKI +// +// Alfawise Ex8 printer LCD marked as WYH L12864 COG +// +//#define WYH_L12864 + // // MakerLab Mini Panel with graphic // controller and SD support - https://reprap.org/wiki/Mini_panel diff --git a/config/examples/Wanhao/Duplicator i3 Mini/Configuration_adv.h b/config/examples/Wanhao/Duplicator i3 Mini/Configuration_adv.h index 869e10d891..3ea32dc399 100644 --- a/config/examples/Wanhao/Duplicator i3 Mini/Configuration_adv.h +++ b/config/examples/Wanhao/Duplicator i3 Mini/Configuration_adv.h @@ -1603,7 +1603,7 @@ * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. * This will prevent position updates from being displayed. */ - #if ENABLED(U8GLIB_ST7920) + #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. //#define DOGM_SPI_DELAY_US 5 diff --git a/config/examples/Wanhao/Duplicator i3 Plus/Configuration.h b/config/examples/Wanhao/Duplicator i3 Plus/Configuration.h index 3f5096f8df..f20b239b22 100644 --- a/config/examples/Wanhao/Duplicator i3 Plus/Configuration.h +++ b/config/examples/Wanhao/Duplicator i3 Plus/Configuration.h @@ -2376,6 +2376,11 @@ //#define VIKI2 //#define miniVIKI +// +// Alfawise Ex8 printer LCD marked as WYH L12864 COG +// +//#define WYH_L12864 + // // MakerLab Mini Panel with graphic // controller and SD support - https://reprap.org/wiki/Mini_panel diff --git a/config/examples/Wanhao/Duplicator i3 Plus/Configuration_adv.h b/config/examples/Wanhao/Duplicator i3 Plus/Configuration_adv.h index 63b768cfea..4a9eabfac2 100644 --- a/config/examples/Wanhao/Duplicator i3 Plus/Configuration_adv.h +++ b/config/examples/Wanhao/Duplicator i3 Plus/Configuration_adv.h @@ -1603,7 +1603,7 @@ * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. * This will prevent position updates from being displayed. */ - #if ENABLED(U8GLIB_ST7920) + #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. //#define DOGM_SPI_DELAY_US 5 diff --git a/config/examples/Weistek/wt150/Configuration.h b/config/examples/Weistek/wt150/Configuration.h index 32f0dd27ea..dfeac40026 100644 --- a/config/examples/Weistek/wt150/Configuration.h +++ b/config/examples/Weistek/wt150/Configuration.h @@ -2379,6 +2379,11 @@ //#define VIKI2 //#define miniVIKI +// +// Alfawise Ex8 printer LCD marked as WYH L12864 COG +// +//#define WYH_L12864 + // // MakerLab Mini Panel with graphic // controller and SD support - https://reprap.org/wiki/Mini_panel diff --git a/config/examples/Weistek/wt150/Configuration_adv.h b/config/examples/Weistek/wt150/Configuration_adv.h index f20467754b..625a2e80e8 100644 --- a/config/examples/Weistek/wt150/Configuration_adv.h +++ b/config/examples/Weistek/wt150/Configuration_adv.h @@ -1603,7 +1603,7 @@ * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. * This will prevent position updates from being displayed. */ - #if ENABLED(U8GLIB_ST7920) + #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. //#define DOGM_SPI_DELAY_US 5 diff --git a/config/examples/Zonestar/P802M/Configuration.h b/config/examples/Zonestar/P802M/Configuration.h index 9dacedc06f..8527d5168c 100644 --- a/config/examples/Zonestar/P802M/Configuration.h +++ b/config/examples/Zonestar/P802M/Configuration.h @@ -2377,6 +2377,11 @@ //#define VIKI2 //#define miniVIKI +// +// Alfawise Ex8 printer LCD marked as WYH L12864 COG +// +//#define WYH_L12864 + // // MakerLab Mini Panel with graphic // controller and SD support - https://reprap.org/wiki/Mini_panel diff --git a/config/examples/Zonestar/P802M/Configuration_adv.h b/config/examples/Zonestar/P802M/Configuration_adv.h index 9fca1cf063..4c62261ac0 100644 --- a/config/examples/Zonestar/P802M/Configuration_adv.h +++ b/config/examples/Zonestar/P802M/Configuration_adv.h @@ -1603,7 +1603,7 @@ * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. * This will prevent position updates from being displayed. */ - #if ENABLED(U8GLIB_ST7920) + #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. //#define DOGM_SPI_DELAY_US 5 diff --git a/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (A4988)/Configuration.h b/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (A4988)/Configuration.h index 38677c2ca3..9496449b88 100755 --- a/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (A4988)/Configuration.h +++ b/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (A4988)/Configuration.h @@ -2380,6 +2380,11 @@ //#define VIKI2 //#define miniVIKI +// +// Alfawise Ex8 printer LCD marked as WYH L12864 COG +// +//#define WYH_L12864 + // // MakerLab Mini Panel with graphic // controller and SD support - https://reprap.org/wiki/Mini_panel diff --git a/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (A4988)/Configuration_adv.h b/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (A4988)/Configuration_adv.h index 4748019fbc..1c947146f5 100755 --- a/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (A4988)/Configuration_adv.h +++ b/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (A4988)/Configuration_adv.h @@ -1603,7 +1603,7 @@ * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. * This will prevent position updates from being displayed. */ - #if ENABLED(U8GLIB_ST7920) + #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. //#define DOGM_SPI_DELAY_US 5 diff --git a/config/examples/delta/Anycubic/Kossel Linear Plus/Configuration.h b/config/examples/delta/Anycubic/Kossel Linear Plus/Configuration.h index 68fcb040a2..b38f8b61b6 100644 --- a/config/examples/delta/Anycubic/Kossel Linear Plus/Configuration.h +++ b/config/examples/delta/Anycubic/Kossel Linear Plus/Configuration.h @@ -2518,6 +2518,11 @@ //#define VIKI2 //#define miniVIKI +// +// Alfawise Ex8 printer LCD marked as WYH L12864 COG +// +//#define WYH_L12864 + // // MakerLab Mini Panel with graphic // controller and SD support - https://reprap.org/wiki/Mini_panel diff --git a/config/examples/delta/Anycubic/Kossel Linear Plus/Configuration_adv.h b/config/examples/delta/Anycubic/Kossel Linear Plus/Configuration_adv.h index 0c7d866b46..cd38cbb4e4 100644 --- a/config/examples/delta/Anycubic/Kossel Linear Plus/Configuration_adv.h +++ b/config/examples/delta/Anycubic/Kossel Linear Plus/Configuration_adv.h @@ -1606,7 +1606,7 @@ * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. * This will prevent position updates from being displayed. */ - #if ENABLED(U8GLIB_ST7920) + #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. //#define DOGM_SPI_DELAY_US 5 diff --git a/config/examples/delta/Anycubic/Kossel/Configuration.h b/config/examples/delta/Anycubic/Kossel/Configuration.h index fed3482026..4b1f970f67 100644 --- a/config/examples/delta/Anycubic/Kossel/Configuration.h +++ b/config/examples/delta/Anycubic/Kossel/Configuration.h @@ -2518,6 +2518,11 @@ //#define VIKI2 //#define miniVIKI +// +// Alfawise Ex8 printer LCD marked as WYH L12864 COG +// +//#define WYH_L12864 + // // MakerLab Mini Panel with graphic // controller and SD support - https://reprap.org/wiki/Mini_panel diff --git a/config/examples/delta/Anycubic/Kossel/Configuration_adv.h b/config/examples/delta/Anycubic/Kossel/Configuration_adv.h index 4782c01d79..18d29beb14 100644 --- a/config/examples/delta/Anycubic/Kossel/Configuration_adv.h +++ b/config/examples/delta/Anycubic/Kossel/Configuration_adv.h @@ -1605,7 +1605,7 @@ * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. * This will prevent position updates from being displayed. */ - #if ENABLED(U8GLIB_ST7920) + #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. //#define DOGM_SPI_DELAY_US 5 diff --git a/config/examples/delta/Anycubic/Predator/Configuration.h b/config/examples/delta/Anycubic/Predator/Configuration.h index cfd2c77ef3..fd1c769c3b 100644 --- a/config/examples/delta/Anycubic/Predator/Configuration.h +++ b/config/examples/delta/Anycubic/Predator/Configuration.h @@ -2461,6 +2461,11 @@ //#define VIKI2 //#define miniVIKI +// +// Alfawise Ex8 printer LCD marked as WYH L12864 COG +// +//#define WYH_L12864 + // // MakerLab Mini Panel with graphic // controller and SD support - https://reprap.org/wiki/Mini_panel diff --git a/config/examples/delta/Anycubic/Predator/Configuration_adv.h b/config/examples/delta/Anycubic/Predator/Configuration_adv.h index 83fefc33c0..43fd0610fe 100644 --- a/config/examples/delta/Anycubic/Predator/Configuration_adv.h +++ b/config/examples/delta/Anycubic/Predator/Configuration_adv.h @@ -1606,7 +1606,7 @@ * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. * This will prevent position updates from being displayed. */ - #if ENABLED(U8GLIB_ST7920) + #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. //#define DOGM_SPI_DELAY_US 5 diff --git a/config/examples/delta/Dreammaker/Overlord/Configuration.h b/config/examples/delta/Dreammaker/Overlord/Configuration.h index e42ac3100e..11b7152897 100644 --- a/config/examples/delta/Dreammaker/Overlord/Configuration.h +++ b/config/examples/delta/Dreammaker/Overlord/Configuration.h @@ -2458,6 +2458,11 @@ //#define VIKI2 //#define miniVIKI +// +// Alfawise Ex8 printer LCD marked as WYH L12864 COG +// +//#define WYH_L12864 + // // MakerLab Mini Panel with graphic // controller and SD support - https://reprap.org/wiki/Mini_panel diff --git a/config/examples/delta/Dreammaker/Overlord/Configuration_adv.h b/config/examples/delta/Dreammaker/Overlord/Configuration_adv.h index e9ea3bbc9d..8ec3433503 100644 --- a/config/examples/delta/Dreammaker/Overlord/Configuration_adv.h +++ b/config/examples/delta/Dreammaker/Overlord/Configuration_adv.h @@ -1605,7 +1605,7 @@ * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. * This will prevent position updates from being displayed. */ - #if ENABLED(U8GLIB_ST7920) + #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. //#define DOGM_SPI_DELAY_US 5 diff --git a/config/examples/delta/Dreammaker/Overlord_Pro/Configuration.h b/config/examples/delta/Dreammaker/Overlord_Pro/Configuration.h index 2111732dab..80314b3b24 100644 --- a/config/examples/delta/Dreammaker/Overlord_Pro/Configuration.h +++ b/config/examples/delta/Dreammaker/Overlord_Pro/Configuration.h @@ -2469,6 +2469,11 @@ //#define VIKI2 //#define miniVIKI +// +// Alfawise Ex8 printer LCD marked as WYH L12864 COG +// +//#define WYH_L12864 + // // MakerLab Mini Panel with graphic // controller and SD support - https://reprap.org/wiki/Mini_panel diff --git a/config/examples/delta/Dreammaker/Overlord_Pro/Configuration_adv.h b/config/examples/delta/Dreammaker/Overlord_Pro/Configuration_adv.h index e9ea3bbc9d..8ec3433503 100644 --- a/config/examples/delta/Dreammaker/Overlord_Pro/Configuration_adv.h +++ b/config/examples/delta/Dreammaker/Overlord_Pro/Configuration_adv.h @@ -1605,7 +1605,7 @@ * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. * This will prevent position updates from being displayed. */ - #if ENABLED(U8GLIB_ST7920) + #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. //#define DOGM_SPI_DELAY_US 5 diff --git a/config/examples/delta/FLSUN/Q5-nano_v1/Configuration.h b/config/examples/delta/FLSUN/Q5-nano_v1/Configuration.h index 323ba0e918..043664d292 100644 --- a/config/examples/delta/FLSUN/Q5-nano_v1/Configuration.h +++ b/config/examples/delta/FLSUN/Q5-nano_v1/Configuration.h @@ -2463,6 +2463,11 @@ //#define VIKI2 //#define miniVIKI +// +// Alfawise Ex8 printer LCD marked as WYH L12864 COG +// +//#define WYH_L12864 + // // MakerLab Mini Panel with graphic // controller and SD support - https://reprap.org/wiki/Mini_panel diff --git a/config/examples/delta/FLSUN/Q5-nano_v1/Configuration_adv.h b/config/examples/delta/FLSUN/Q5-nano_v1/Configuration_adv.h index c1523cb6c8..bf363215db 100644 --- a/config/examples/delta/FLSUN/Q5-nano_v1/Configuration_adv.h +++ b/config/examples/delta/FLSUN/Q5-nano_v1/Configuration_adv.h @@ -1605,7 +1605,7 @@ * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. * This will prevent position updates from being displayed. */ - #if ENABLED(U8GLIB_ST7920) + #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. //#define DOGM_SPI_DELAY_US 5 diff --git a/config/examples/delta/FLSUN/Q5-nano_v2/Configuration.h b/config/examples/delta/FLSUN/Q5-nano_v2/Configuration.h index b6daf94868..b21b8c7a13 100644 --- a/config/examples/delta/FLSUN/Q5-nano_v2/Configuration.h +++ b/config/examples/delta/FLSUN/Q5-nano_v2/Configuration.h @@ -2459,6 +2459,11 @@ //#define VIKI2 //#define miniVIKI +// +// Alfawise Ex8 printer LCD marked as WYH L12864 COG +// +//#define WYH_L12864 + // // MakerLab Mini Panel with graphic // controller and SD support - https://reprap.org/wiki/Mini_panel diff --git a/config/examples/delta/FLSUN/QQ-S/Configuration.h b/config/examples/delta/FLSUN/QQ-S/Configuration.h index 7d94d05c10..9bf7e69462 100644 --- a/config/examples/delta/FLSUN/QQ-S/Configuration.h +++ b/config/examples/delta/FLSUN/QQ-S/Configuration.h @@ -2460,6 +2460,11 @@ //#define VIKI2 //#define miniVIKI +// +// Alfawise Ex8 printer LCD marked as WYH L12864 COG +// +//#define WYH_L12864 + // // MakerLab Mini Panel with graphic // controller and SD support - https://reprap.org/wiki/Mini_panel diff --git a/config/examples/delta/FLSUN/QQ-S/Configuration_adv.h b/config/examples/delta/FLSUN/QQ-S/Configuration_adv.h index 54a528d4cc..051f5cd937 100644 --- a/config/examples/delta/FLSUN/QQ-S/Configuration_adv.h +++ b/config/examples/delta/FLSUN/QQ-S/Configuration_adv.h @@ -1605,7 +1605,7 @@ * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. * This will prevent position updates from being displayed. */ - #if ENABLED(U8GLIB_ST7920) + #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. //#define DOGM_SPI_DELAY_US 5 diff --git a/config/examples/delta/FLSUN/QQS-Pro/Configuration.h b/config/examples/delta/FLSUN/QQS-Pro/Configuration.h index fb5af273f5..8fa189771c 100644 --- a/config/examples/delta/FLSUN/QQS-Pro/Configuration.h +++ b/config/examples/delta/FLSUN/QQS-Pro/Configuration.h @@ -2472,6 +2472,11 @@ //#define VIKI2 //#define miniVIKI +// +// Alfawise Ex8 printer LCD marked as WYH L12864 COG +// +//#define WYH_L12864 + // // MakerLab Mini Panel with graphic // controller and SD support - https://reprap.org/wiki/Mini_panel diff --git a/config/examples/delta/FLSUN/QQS-Pro/Configuration_adv.h b/config/examples/delta/FLSUN/QQS-Pro/Configuration_adv.h index e5a2fcd1be..a5cb80a74f 100644 --- a/config/examples/delta/FLSUN/QQS-Pro/Configuration_adv.h +++ b/config/examples/delta/FLSUN/QQS-Pro/Configuration_adv.h @@ -1606,7 +1606,7 @@ * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. * This will prevent position updates from being displayed. */ - #if ENABLED(U8GLIB_ST7920) + #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. //#define DOGM_SPI_DELAY_US 5 diff --git a/config/examples/delta/FLSUN/auto_calibrate/Configuration.h b/config/examples/delta/FLSUN/auto_calibrate/Configuration.h index de1c2d6283..804ea18356 100644 --- a/config/examples/delta/FLSUN/auto_calibrate/Configuration.h +++ b/config/examples/delta/FLSUN/auto_calibrate/Configuration.h @@ -2463,6 +2463,11 @@ //#define VIKI2 //#define miniVIKI +// +// Alfawise Ex8 printer LCD marked as WYH L12864 COG +// +//#define WYH_L12864 + // // MakerLab Mini Panel with graphic // controller and SD support - https://reprap.org/wiki/Mini_panel diff --git a/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h b/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h index 583deacf2c..9025db0899 100644 --- a/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h +++ b/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h @@ -1605,7 +1605,7 @@ * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. * This will prevent position updates from being displayed. */ - #if ENABLED(U8GLIB_ST7920) + #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. //#define DOGM_SPI_DELAY_US 5 diff --git a/config/examples/delta/FLSUN/kossel/Configuration.h b/config/examples/delta/FLSUN/kossel/Configuration.h index 1eb85822b6..4a1679ba46 100644 --- a/config/examples/delta/FLSUN/kossel/Configuration.h +++ b/config/examples/delta/FLSUN/kossel/Configuration.h @@ -2462,6 +2462,11 @@ //#define VIKI2 //#define miniVIKI +// +// Alfawise Ex8 printer LCD marked as WYH L12864 COG +// +//#define WYH_L12864 + // // MakerLab Mini Panel with graphic // controller and SD support - https://reprap.org/wiki/Mini_panel diff --git a/config/examples/delta/FLSUN/kossel/Configuration_adv.h b/config/examples/delta/FLSUN/kossel/Configuration_adv.h index 583deacf2c..9025db0899 100644 --- a/config/examples/delta/FLSUN/kossel/Configuration_adv.h +++ b/config/examples/delta/FLSUN/kossel/Configuration_adv.h @@ -1605,7 +1605,7 @@ * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. * This will prevent position updates from being displayed. */ - #if ENABLED(U8GLIB_ST7920) + #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. //#define DOGM_SPI_DELAY_US 5 diff --git a/config/examples/delta/FLSUN/kossel_mini/Configuration.h b/config/examples/delta/FLSUN/kossel_mini/Configuration.h index e081011ba8..334b9f9217 100644 --- a/config/examples/delta/FLSUN/kossel_mini/Configuration.h +++ b/config/examples/delta/FLSUN/kossel_mini/Configuration.h @@ -2462,6 +2462,11 @@ //#define VIKI2 //#define miniVIKI +// +// Alfawise Ex8 printer LCD marked as WYH L12864 COG +// +//#define WYH_L12864 + // // MakerLab Mini Panel with graphic // controller and SD support - https://reprap.org/wiki/Mini_panel diff --git a/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h b/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h index 49d1b31207..78eed842f6 100644 --- a/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h +++ b/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h @@ -1605,7 +1605,7 @@ * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. * This will prevent position updates from being displayed. */ - #if ENABLED(U8GLIB_ST7920) + #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. //#define DOGM_SPI_DELAY_US 5 diff --git a/config/examples/delta/Geeetech/G2/Configuration.h b/config/examples/delta/Geeetech/G2/Configuration.h index 683e8af5c4..3fa5c0ace3 100644 --- a/config/examples/delta/Geeetech/G2/Configuration.h +++ b/config/examples/delta/Geeetech/G2/Configuration.h @@ -2459,6 +2459,11 @@ //#define VIKI2 //#define miniVIKI +// +// Alfawise Ex8 printer LCD marked as WYH L12864 COG +// +//#define WYH_L12864 + // // MakerLab Mini Panel with graphic // controller and SD support - https://reprap.org/wiki/Mini_panel diff --git a/config/examples/delta/Geeetech/G2/Configuration_adv.h b/config/examples/delta/Geeetech/G2/Configuration_adv.h index 580975fd7e..d41bcd2ca2 100644 --- a/config/examples/delta/Geeetech/G2/Configuration_adv.h +++ b/config/examples/delta/Geeetech/G2/Configuration_adv.h @@ -1605,7 +1605,7 @@ * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. * This will prevent position updates from being displayed. */ - #if ENABLED(U8GLIB_ST7920) + #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. //#define DOGM_SPI_DELAY_US 5 diff --git a/config/examples/delta/Geeetech/G2Pro/Configuration.h b/config/examples/delta/Geeetech/G2Pro/Configuration.h index 2cec282e2d..dcee157155 100644 --- a/config/examples/delta/Geeetech/G2Pro/Configuration.h +++ b/config/examples/delta/Geeetech/G2Pro/Configuration.h @@ -2459,6 +2459,11 @@ //#define VIKI2 //#define miniVIKI +// +// Alfawise Ex8 printer LCD marked as WYH L12864 COG +// +//#define WYH_L12864 + // // MakerLab Mini Panel with graphic // controller and SD support - https://reprap.org/wiki/Mini_panel diff --git a/config/examples/delta/Geeetech/G2Pro/Configuration_adv.h b/config/examples/delta/Geeetech/G2Pro/Configuration_adv.h index 6e15ae23cc..6728bc31f2 100644 --- a/config/examples/delta/Geeetech/G2Pro/Configuration_adv.h +++ b/config/examples/delta/Geeetech/G2Pro/Configuration_adv.h @@ -1605,7 +1605,7 @@ * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. * This will prevent position updates from being displayed. */ - #if ENABLED(U8GLIB_ST7920) + #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. //#define DOGM_SPI_DELAY_US 5 diff --git a/config/examples/delta/Geeetech/G2S/Configuration.h b/config/examples/delta/Geeetech/G2S/Configuration.h index 5a1b56ff28..f358a8032b 100644 --- a/config/examples/delta/Geeetech/G2S/Configuration.h +++ b/config/examples/delta/Geeetech/G2S/Configuration.h @@ -2459,6 +2459,11 @@ //#define VIKI2 //#define miniVIKI +// +// Alfawise Ex8 printer LCD marked as WYH L12864 COG +// +//#define WYH_L12864 + // // MakerLab Mini Panel with graphic // controller and SD support - https://reprap.org/wiki/Mini_panel diff --git a/config/examples/delta/Geeetech/G2S/Configuration_adv.h b/config/examples/delta/Geeetech/G2S/Configuration_adv.h index 6e15ae23cc..6728bc31f2 100644 --- a/config/examples/delta/Geeetech/G2S/Configuration_adv.h +++ b/config/examples/delta/Geeetech/G2S/Configuration_adv.h @@ -1605,7 +1605,7 @@ * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. * This will prevent position updates from being displayed. */ - #if ENABLED(U8GLIB_ST7920) + #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. //#define DOGM_SPI_DELAY_US 5 diff --git a/config/examples/delta/Geeetech/G2SPro/Configuration.h b/config/examples/delta/Geeetech/G2SPro/Configuration.h index be8139345e..4babe2fd98 100644 --- a/config/examples/delta/Geeetech/G2SPro/Configuration.h +++ b/config/examples/delta/Geeetech/G2SPro/Configuration.h @@ -2459,6 +2459,11 @@ //#define VIKI2 //#define miniVIKI +// +// Alfawise Ex8 printer LCD marked as WYH L12864 COG +// +//#define WYH_L12864 + // // MakerLab Mini Panel with graphic // controller and SD support - https://reprap.org/wiki/Mini_panel diff --git a/config/examples/delta/Geeetech/G2SPro/Configuration_adv.h b/config/examples/delta/Geeetech/G2SPro/Configuration_adv.h index 6e15ae23cc..6728bc31f2 100644 --- a/config/examples/delta/Geeetech/G2SPro/Configuration_adv.h +++ b/config/examples/delta/Geeetech/G2SPro/Configuration_adv.h @@ -1605,7 +1605,7 @@ * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. * This will prevent position updates from being displayed. */ - #if ENABLED(U8GLIB_ST7920) + #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. //#define DOGM_SPI_DELAY_US 5 diff --git a/config/examples/delta/Geeetech/Rostock 301/Configuration.h b/config/examples/delta/Geeetech/Rostock 301/Configuration.h index bfe65360a3..ecde82af8e 100644 --- a/config/examples/delta/Geeetech/Rostock 301/Configuration.h +++ b/config/examples/delta/Geeetech/Rostock 301/Configuration.h @@ -2461,6 +2461,11 @@ //#define VIKI2 //#define miniVIKI +// +// Alfawise Ex8 printer LCD marked as WYH L12864 COG +// +//#define WYH_L12864 + // // MakerLab Mini Panel with graphic // controller and SD support - https://reprap.org/wiki/Mini_panel diff --git a/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h b/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h index 09528b2b1c..82d146dd68 100644 --- a/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h +++ b/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h @@ -1605,7 +1605,7 @@ * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. * This will prevent position updates from being displayed. */ - #if ENABLED(U8GLIB_ST7920) + #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. //#define DOGM_SPI_DELAY_US 5 diff --git a/config/examples/delta/Hatchbox_Alpha/Configuration.h b/config/examples/delta/Hatchbox_Alpha/Configuration.h index 0c2f53f8c2..9ee541c7d3 100644 --- a/config/examples/delta/Hatchbox_Alpha/Configuration.h +++ b/config/examples/delta/Hatchbox_Alpha/Configuration.h @@ -2465,6 +2465,11 @@ //#define VIKI2 //#define miniVIKI +// +// Alfawise Ex8 printer LCD marked as WYH L12864 COG +// +//#define WYH_L12864 + // // MakerLab Mini Panel with graphic // controller and SD support - https://reprap.org/wiki/Mini_panel diff --git a/config/examples/delta/Hatchbox_Alpha/Configuration_adv.h b/config/examples/delta/Hatchbox_Alpha/Configuration_adv.h index 29847a702a..a8a8a07398 100644 --- a/config/examples/delta/Hatchbox_Alpha/Configuration_adv.h +++ b/config/examples/delta/Hatchbox_Alpha/Configuration_adv.h @@ -1605,7 +1605,7 @@ * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. * This will prevent position updates from being displayed. */ - #if ENABLED(U8GLIB_ST7920) + #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. //#define DOGM_SPI_DELAY_US 5 diff --git a/config/examples/delta/MKS/SBASE/Configuration.h b/config/examples/delta/MKS/SBASE/Configuration.h index 176bb07904..a09320c369 100644 --- a/config/examples/delta/MKS/SBASE/Configuration.h +++ b/config/examples/delta/MKS/SBASE/Configuration.h @@ -2460,6 +2460,11 @@ //#define VIKI2 //#define miniVIKI +// +// Alfawise Ex8 printer LCD marked as WYH L12864 COG +// +//#define WYH_L12864 + // // MakerLab Mini Panel with graphic // controller and SD support - https://reprap.org/wiki/Mini_panel diff --git a/config/examples/delta/MKS/SBASE/Configuration_adv.h b/config/examples/delta/MKS/SBASE/Configuration_adv.h index 10fb78e223..fd7df037ae 100644 --- a/config/examples/delta/MKS/SBASE/Configuration_adv.h +++ b/config/examples/delta/MKS/SBASE/Configuration_adv.h @@ -1605,7 +1605,7 @@ * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. * This will prevent position updates from being displayed. */ - #if ENABLED(U8GLIB_ST7920) + #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. //#define DOGM_SPI_DELAY_US 5 diff --git a/config/examples/delta/Malyan M300/Configuration.h b/config/examples/delta/Malyan M300/Configuration.h index 6fbfab6e5b..2aa308305d 100644 --- a/config/examples/delta/Malyan M300/Configuration.h +++ b/config/examples/delta/Malyan M300/Configuration.h @@ -2425,6 +2425,11 @@ //#define VIKI2 //#define miniVIKI +// +// Alfawise Ex8 printer LCD marked as WYH L12864 COG +// +//#define WYH_L12864 + // // MakerLab Mini Panel with graphic // controller and SD support - https://reprap.org/wiki/Mini_panel diff --git a/config/examples/delta/Malyan M300/Configuration_adv.h b/config/examples/delta/Malyan M300/Configuration_adv.h index e7f84fa20a..1cf0c27ed8 100644 --- a/config/examples/delta/Malyan M300/Configuration_adv.h +++ b/config/examples/delta/Malyan M300/Configuration_adv.h @@ -1605,7 +1605,7 @@ * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. * This will prevent position updates from being displayed. */ - #if ENABLED(U8GLIB_ST7920) + #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. //#define DOGM_SPI_DELAY_US 5 diff --git a/config/examples/delta/Tevo Little Monster/Configuration.h b/config/examples/delta/Tevo Little Monster/Configuration.h index a44aae0c2a..1de69bf15f 100644 --- a/config/examples/delta/Tevo Little Monster/Configuration.h +++ b/config/examples/delta/Tevo Little Monster/Configuration.h @@ -2461,6 +2461,11 @@ //#define VIKI2 //#define miniVIKI +// +// Alfawise Ex8 printer LCD marked as WYH L12864 COG +// +//#define WYH_L12864 + // // MakerLab Mini Panel with graphic // controller and SD support - https://reprap.org/wiki/Mini_panel diff --git a/config/examples/delta/Tevo Little Monster/Configuration_adv.h b/config/examples/delta/Tevo Little Monster/Configuration_adv.h index e1d6d0bf1c..ed11c3c9bb 100644 --- a/config/examples/delta/Tevo Little Monster/Configuration_adv.h +++ b/config/examples/delta/Tevo Little Monster/Configuration_adv.h @@ -1605,7 +1605,7 @@ * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. * This will prevent position updates from being displayed. */ - #if ENABLED(U8GLIB_ST7920) + #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. //#define DOGM_SPI_DELAY_US 5 diff --git a/config/examples/delta/generic/Configuration.h b/config/examples/delta/generic/Configuration.h index 8da50a97bd..01156cd01a 100644 --- a/config/examples/delta/generic/Configuration.h +++ b/config/examples/delta/generic/Configuration.h @@ -2460,6 +2460,11 @@ //#define VIKI2 //#define miniVIKI +// +// Alfawise Ex8 printer LCD marked as WYH L12864 COG +// +//#define WYH_L12864 + // // MakerLab Mini Panel with graphic // controller and SD support - https://reprap.org/wiki/Mini_panel diff --git a/config/examples/delta/generic/Configuration_adv.h b/config/examples/delta/generic/Configuration_adv.h index 49d1b31207..78eed842f6 100644 --- a/config/examples/delta/generic/Configuration_adv.h +++ b/config/examples/delta/generic/Configuration_adv.h @@ -1605,7 +1605,7 @@ * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. * This will prevent position updates from being displayed. */ - #if ENABLED(U8GLIB_ST7920) + #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. //#define DOGM_SPI_DELAY_US 5 diff --git a/config/examples/delta/kossel_clear/Configuration.h b/config/examples/delta/kossel_clear/Configuration.h index 8ba1ff61ca..9860c3c4ac 100644 --- a/config/examples/delta/kossel_clear/Configuration.h +++ b/config/examples/delta/kossel_clear/Configuration.h @@ -2460,6 +2460,11 @@ //#define VIKI2 //#define miniVIKI +// +// Alfawise Ex8 printer LCD marked as WYH L12864 COG +// +//#define WYH_L12864 + // // MakerLab Mini Panel with graphic // controller and SD support - https://reprap.org/wiki/Mini_panel diff --git a/config/examples/delta/kossel_clear/Configuration_adv.h b/config/examples/delta/kossel_clear/Configuration_adv.h index c82630cc6d..bec663fec2 100644 --- a/config/examples/delta/kossel_clear/Configuration_adv.h +++ b/config/examples/delta/kossel_clear/Configuration_adv.h @@ -1605,7 +1605,7 @@ * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. * This will prevent position updates from being displayed. */ - #if ENABLED(U8GLIB_ST7920) + #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. //#define DOGM_SPI_DELAY_US 5 diff --git a/config/examples/delta/kossel_mini/Configuration.h b/config/examples/delta/kossel_mini/Configuration.h index f08fb2cf5d..bfd25f095d 100644 --- a/config/examples/delta/kossel_mini/Configuration.h +++ b/config/examples/delta/kossel_mini/Configuration.h @@ -2462,6 +2462,11 @@ //#define VIKI2 //#define miniVIKI +// +// Alfawise Ex8 printer LCD marked as WYH L12864 COG +// +//#define WYH_L12864 + // // MakerLab Mini Panel with graphic // controller and SD support - https://reprap.org/wiki/Mini_panel diff --git a/config/examples/delta/kossel_pro/Configuration.h b/config/examples/delta/kossel_pro/Configuration.h index 1588ca6928..a6c578b892 100644 --- a/config/examples/delta/kossel_pro/Configuration.h +++ b/config/examples/delta/kossel_pro/Configuration.h @@ -2481,6 +2481,11 @@ //#define VIKI2 //#define miniVIKI +// +// Alfawise Ex8 printer LCD marked as WYH L12864 COG +// +//#define WYH_L12864 + // // MakerLab Mini Panel with graphic // controller and SD support - https://reprap.org/wiki/Mini_panel diff --git a/config/examples/delta/kossel_xl/Configuration.h b/config/examples/delta/kossel_xl/Configuration.h index f008a4ec4a..055e3ed369 100644 --- a/config/examples/delta/kossel_xl/Configuration.h +++ b/config/examples/delta/kossel_xl/Configuration.h @@ -2465,6 +2465,11 @@ //#define VIKI2 //#define miniVIKI +// +// Alfawise Ex8 printer LCD marked as WYH L12864 COG +// +//#define WYH_L12864 + // // MakerLab Mini Panel with graphic // controller and SD support - https://reprap.org/wiki/Mini_panel diff --git a/config/examples/delta/kossel_xl/Configuration_adv.h b/config/examples/delta/kossel_xl/Configuration_adv.h index 7e5d0289ea..6890dcade6 100644 --- a/config/examples/delta/kossel_xl/Configuration_adv.h +++ b/config/examples/delta/kossel_xl/Configuration_adv.h @@ -1605,7 +1605,7 @@ * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. * This will prevent position updates from being displayed. */ - #if ENABLED(U8GLIB_ST7920) + #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. //#define DOGM_SPI_DELAY_US 5 diff --git a/config/examples/gCreate/gMax1.5+/Configuration.h b/config/examples/gCreate/gMax1.5+/Configuration.h index 7f9bbd0fc9..464fb67599 100644 --- a/config/examples/gCreate/gMax1.5+/Configuration.h +++ b/config/examples/gCreate/gMax1.5+/Configuration.h @@ -2384,6 +2384,11 @@ //#define VIKI2 //#define miniVIKI +// +// Alfawise Ex8 printer LCD marked as WYH L12864 COG +// +//#define WYH_L12864 + // // MakerLab Mini Panel with graphic // controller and SD support - https://reprap.org/wiki/Mini_panel diff --git a/config/examples/gCreate/gMax1.5+/Configuration_adv.h b/config/examples/gCreate/gMax1.5+/Configuration_adv.h index 11b97d909f..0c8e3f16b6 100644 --- a/config/examples/gCreate/gMax1.5+/Configuration_adv.h +++ b/config/examples/gCreate/gMax1.5+/Configuration_adv.h @@ -1603,7 +1603,7 @@ * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. * This will prevent position updates from being displayed. */ - #if ENABLED(U8GLIB_ST7920) + #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. //#define DOGM_SPI_DELAY_US 5 diff --git a/config/examples/linear_axes/RAMPS 5 LINEAR_AXES/Configuration.h b/config/examples/linear_axes/RAMPS 5 LINEAR_AXES/Configuration.h index 3a62bb9a5a..fcddd7ddd3 100644 --- a/config/examples/linear_axes/RAMPS 5 LINEAR_AXES/Configuration.h +++ b/config/examples/linear_axes/RAMPS 5 LINEAR_AXES/Configuration.h @@ -2378,6 +2378,11 @@ //#define VIKI2 //#define miniVIKI +// +// Alfawise Ex8 printer LCD marked as WYH L12864 COG +// +//#define WYH_L12864 + // // MakerLab Mini Panel with graphic // controller and SD support - https://reprap.org/wiki/Mini_panel diff --git a/config/examples/linear_axes/RAMPS 5 LINEAR_AXES/Configuration_adv.h b/config/examples/linear_axes/RAMPS 5 LINEAR_AXES/Configuration_adv.h index a5aee76677..d876a15616 100644 --- a/config/examples/linear_axes/RAMPS 5 LINEAR_AXES/Configuration_adv.h +++ b/config/examples/linear_axes/RAMPS 5 LINEAR_AXES/Configuration_adv.h @@ -1603,7 +1603,7 @@ * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. * This will prevent position updates from being displayed. */ - #if ENABLED(U8GLIB_ST7920) + #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. //#define DOGM_SPI_DELAY_US 5 diff --git a/config/examples/makibox/Configuration.h b/config/examples/makibox/Configuration.h index 3730ee3afc..2fdac3dee4 100644 --- a/config/examples/makibox/Configuration.h +++ b/config/examples/makibox/Configuration.h @@ -2379,6 +2379,11 @@ //#define VIKI2 //#define miniVIKI +// +// Alfawise Ex8 printer LCD marked as WYH L12864 COG +// +//#define WYH_L12864 + // // MakerLab Mini Panel with graphic // controller and SD support - https://reprap.org/wiki/Mini_panel diff --git a/config/examples/makibox/Configuration_adv.h b/config/examples/makibox/Configuration_adv.h index aeec687c32..80497fbe68 100644 --- a/config/examples/makibox/Configuration_adv.h +++ b/config/examples/makibox/Configuration_adv.h @@ -1603,7 +1603,7 @@ * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. * This will prevent position updates from being displayed. */ - #if ENABLED(U8GLIB_ST7920) + #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. //#define DOGM_SPI_DELAY_US 5 diff --git a/config/examples/tvrrug/Round2/Configuration.h b/config/examples/tvrrug/Round2/Configuration.h index 76b71b081f..899c1d0e6d 100644 --- a/config/examples/tvrrug/Round2/Configuration.h +++ b/config/examples/tvrrug/Round2/Configuration.h @@ -2383,6 +2383,11 @@ //#define VIKI2 //#define miniVIKI +// +// Alfawise Ex8 printer LCD marked as WYH L12864 COG +// +//#define WYH_L12864 + // // MakerLab Mini Panel with graphic // controller and SD support - https://reprap.org/wiki/Mini_panel diff --git a/config/examples/tvrrug/Round2/Configuration_adv.h b/config/examples/tvrrug/Round2/Configuration_adv.h index 2897be5e0b..ac5588c7a1 100644 --- a/config/examples/tvrrug/Round2/Configuration_adv.h +++ b/config/examples/tvrrug/Round2/Configuration_adv.h @@ -1603,7 +1603,7 @@ * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. * This will prevent position updates from being displayed. */ - #if ENABLED(U8GLIB_ST7920) + #if IS_U8GLIB_ST7920 // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. //#define DOGM_SPI_DELAY_US 5