mirror of
https://github.com/MarlinFirmware/Configurations.git
synced 2026-01-05 22:27:44 -07:00
Examples Customizations
This commit is contained in:
Scott Lahteine
parent
7cc1ba702e
commit
0f6beecb92
596 changed files with 30743 additions and 26907 deletions
|
|
@ -21,6 +21,8 @@
|
|||
*/
|
||||
#pragma once
|
||||
|
||||
#define CONFIG_EXAMPLES_DIR "ADIMLab/Gantry v1"
|
||||
|
||||
/**
|
||||
* Configuration.h
|
||||
*
|
||||
|
|
@ -60,7 +62,7 @@
|
|||
// @section info
|
||||
|
||||
// Author info of this build printed to the host during boot and M115
|
||||
#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes.
|
||||
#define STRING_CONFIG_H_AUTHOR "(ETE-Design, Gantry v1)" // Who made the changes.
|
||||
//#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes)
|
||||
|
||||
/**
|
||||
|
|
@ -78,7 +80,7 @@
|
|||
#define SHOW_BOOTSCREEN
|
||||
|
||||
// Show the bitmap in Marlin/_Bootscreen.h on startup.
|
||||
//#define SHOW_CUSTOM_BOOTSCREEN
|
||||
#define SHOW_CUSTOM_BOOTSCREEN
|
||||
|
||||
// Show the bitmap in Marlin/_Statusscreen.h on the status screen.
|
||||
//#define CUSTOM_STATUS_SCREEN_IMAGE
|
||||
|
|
@ -87,7 +89,7 @@
|
|||
|
||||
// Choose the name from boards.h that matches your setup
|
||||
#ifndef MOTHERBOARD
|
||||
#define MOTHERBOARD BOARD_RAMPS_14_EFB
|
||||
#define MOTHERBOARD BOARD_HJC2560C_REV1
|
||||
#endif
|
||||
|
||||
/**
|
||||
|
|
@ -134,7 +136,7 @@
|
|||
//#define BLUETOOTH
|
||||
|
||||
// Name displayed in the LCD "Ready" message and Info menu
|
||||
//#define CUSTOM_MACHINE_NAME "3D Printer"
|
||||
#define CUSTOM_MACHINE_NAME "ADIMLab Gantry v1"
|
||||
|
||||
// Printer's unique ID, used by some programs to differentiate between machines.
|
||||
// Choose your own or use a service like https://www.uuidgenerator.net/version4
|
||||
|
|
@ -516,7 +518,7 @@
|
|||
#define TEMP_SENSOR_5 0
|
||||
#define TEMP_SENSOR_6 0
|
||||
#define TEMP_SENSOR_7 0
|
||||
#define TEMP_SENSOR_BED 0
|
||||
#define TEMP_SENSOR_BED 1
|
||||
#define TEMP_SENSOR_PROBE 0
|
||||
#define TEMP_SENSOR_CHAMBER 0
|
||||
#define TEMP_SENSOR_COOLER 0
|
||||
|
|
@ -563,7 +565,7 @@
|
|||
|
||||
// Below this temperature the heater will be switched off
|
||||
// because it probably indicates a broken thermistor wire.
|
||||
#define HEATER_0_MINTEMP 5
|
||||
#define HEATER_0_MINTEMP 1
|
||||
#define HEATER_1_MINTEMP 5
|
||||
#define HEATER_2_MINTEMP 5
|
||||
#define HEATER_3_MINTEMP 5
|
||||
|
|
@ -571,7 +573,7 @@
|
|||
#define HEATER_5_MINTEMP 5
|
||||
#define HEATER_6_MINTEMP 5
|
||||
#define HEATER_7_MINTEMP 5
|
||||
#define BED_MINTEMP 5
|
||||
#define BED_MINTEMP 1
|
||||
#define CHAMBER_MINTEMP 5
|
||||
|
||||
// Above this temperature the heater will be switched off.
|
||||
|
|
@ -585,7 +587,7 @@
|
|||
#define HEATER_5_MAXTEMP 275
|
||||
#define HEATER_6_MAXTEMP 275
|
||||
#define HEATER_7_MAXTEMP 275
|
||||
#define BED_MAXTEMP 150
|
||||
#define BED_MAXTEMP 120
|
||||
#define CHAMBER_MAXTEMP 60
|
||||
|
||||
/**
|
||||
|
|
@ -784,7 +786,7 @@
|
|||
* Note: For Bowden Extruders make this large enough to allow load/unload.
|
||||
*/
|
||||
#define PREVENT_LENGTHY_EXTRUDE
|
||||
#define EXTRUDE_MAXLENGTH 200
|
||||
#define EXTRUDE_MAXLENGTH 1300
|
||||
|
||||
//===========================================================================
|
||||
//======================== Thermal Runaway Protection =======================
|
||||
|
|
@ -1024,19 +1026,19 @@
|
|||
#endif
|
||||
|
||||
// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup).
|
||||
#define X_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop.
|
||||
#define Y_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop.
|
||||
#define Z_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop.
|
||||
#define X_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop.
|
||||
#define Y_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop.
|
||||
#define Z_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop.
|
||||
#define I_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop.
|
||||
#define J_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop.
|
||||
#define K_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop.
|
||||
#define X_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop.
|
||||
#define Y_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop.
|
||||
#define Z_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop.
|
||||
#define X_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop.
|
||||
#define Y_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop.
|
||||
#define Z_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop.
|
||||
#define I_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop.
|
||||
#define J_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop.
|
||||
#define K_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop.
|
||||
#define Z_MIN_PROBE_ENDSTOP_INVERTING false // Set to true to invert the logic of the probe.
|
||||
#define Z_MIN_PROBE_ENDSTOP_INVERTING true // Set to true to invert the logic of the probe.
|
||||
|
||||
// Enable this feature if all enabled endstop pins are interrupt-capable.
|
||||
// This will remove the need to poll the interrupt pins, saving many CPU cycles.
|
||||
|
|
@ -1084,7 +1086,7 @@
|
|||
* Override with M92
|
||||
* X, Y, Z [, I [, J [, K]]], E0 [, E1[, E2...]]
|
||||
*/
|
||||
#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 500 }
|
||||
#define DEFAULT_AXIS_STEPS_PER_UNIT { 80.4, 80.4, 400, 94 }
|
||||
|
||||
/**
|
||||
* Default Max Feed Rate (mm/s)
|
||||
|
|
@ -1104,7 +1106,7 @@
|
|||
* Override with M201
|
||||
* X, Y, Z [, I [, J [, K]]], E0 [, E1[, E2...]]
|
||||
*/
|
||||
#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 }
|
||||
#define DEFAULT_MAX_ACCELERATION { 2000, 2000, 50, 2000 }
|
||||
|
||||
//#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2
|
||||
#if ENABLED(LIMITED_MAX_ACCEL_EDITING)
|
||||
|
|
@ -1119,9 +1121,9 @@
|
|||
* M204 R Retract Acceleration
|
||||
* M204 T Travel Acceleration
|
||||
*/
|
||||
#define DEFAULT_ACCELERATION 3000 // X, Y, Z ... and E acceleration for printing moves
|
||||
#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts
|
||||
#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z ... acceleration for travel (non printing) moves
|
||||
#define DEFAULT_ACCELERATION 1000 // X, Y, Z ... and E acceleration for printing moves
|
||||
#define DEFAULT_RETRACT_ACCELERATION 1000 // E acceleration for retracts
|
||||
#define DEFAULT_TRAVEL_ACCELERATION 1000 // X, Y, Z ... acceleration for travel (non printing) moves
|
||||
|
||||
/**
|
||||
* Default Jerk limits (mm/s)
|
||||
|
|
@ -1158,7 +1160,7 @@
|
|||
* https://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html
|
||||
*/
|
||||
#if DISABLED(CLASSIC_JERK)
|
||||
#define JUNCTION_DEVIATION_MM 0.013 // (mm) Distance from real junction edge
|
||||
#define JUNCTION_DEVIATION_MM 0.16 // (mm) Distance from real junction edge
|
||||
#define JD_HANDLE_SMALL_SEGMENTS // Use curvature estimation instead of just the junction angle
|
||||
// for small segments (< 1mm) with large junction angles (> 135°).
|
||||
#endif
|
||||
|
|
@ -1187,7 +1189,7 @@
|
|||
* The probe replaces the Z-MIN endstop and is used for Z homing.
|
||||
* (Automatically enables USE_PROBE_FOR_Z_HOMING.)
|
||||
*/
|
||||
#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN
|
||||
//#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN
|
||||
|
||||
// Force the use of the probe for Z-axis homing
|
||||
//#define USE_PROBE_FOR_Z_HOMING
|
||||
|
|
@ -1527,8 +1529,8 @@
|
|||
|
||||
// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way.
|
||||
#define INVERT_X_DIR false
|
||||
#define INVERT_Y_DIR true
|
||||
#define INVERT_Z_DIR false
|
||||
#define INVERT_Y_DIR false
|
||||
#define INVERT_Z_DIR true
|
||||
//#define INVERT_I_DIR false
|
||||
//#define INVERT_J_DIR false
|
||||
//#define INVERT_K_DIR false
|
||||
|
|
@ -1574,8 +1576,8 @@
|
|||
// @section machine
|
||||
|
||||
// The size of the printable area
|
||||
#define X_BED_SIZE 200
|
||||
#define Y_BED_SIZE 200
|
||||
#define X_BED_SIZE 325
|
||||
#define Y_BED_SIZE 325
|
||||
|
||||
// Travel limits (mm) after homing, corresponding to endstop positions.
|
||||
#define X_MIN_POS 0
|
||||
|
|
@ -1583,7 +1585,7 @@
|
|||
#define Z_MIN_POS 0
|
||||
#define X_MAX_POS X_BED_SIZE
|
||||
#define Y_MAX_POS Y_BED_SIZE
|
||||
#define Z_MAX_POS 200
|
||||
#define Z_MAX_POS 415
|
||||
//#define I_MIN_POS 0
|
||||
//#define I_MAX_POS 50
|
||||
//#define J_MIN_POS 0
|
||||
|
|
@ -1639,10 +1641,11 @@
|
|||
* RAMPS-based boards use SERVO3_PIN for the first runout sensor.
|
||||
* For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc.
|
||||
*/
|
||||
//#define FILAMENT_RUNOUT_SENSOR
|
||||
#define FILAMENT_RUNOUT_SENSOR
|
||||
#if ENABLED(FILAMENT_RUNOUT_SENSOR)
|
||||
#define FIL_RUNOUT_ENABLED_DEFAULT true // Enable the sensor on startup. Override with M412 followed by M500.
|
||||
#define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each.
|
||||
#define FIL_RUNOUT_PIN 24
|
||||
|
||||
#define FIL_RUNOUT_STATE LOW // Pin state indicating that filament is NOT present.
|
||||
#define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins.
|
||||
|
|
@ -2027,7 +2030,7 @@
|
|||
* M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes)
|
||||
* M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.)
|
||||
*/
|
||||
//#define EEPROM_SETTINGS // Persistent storage with M500 and M501
|
||||
#define EEPROM_SETTINGS // Persistent storage with M500 and M501
|
||||
//#define DISABLE_M503 // Saves ~2700 bytes of flash. Disable for release!
|
||||
#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM.
|
||||
#define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load
|
||||
|
|
@ -2043,7 +2046,7 @@
|
|||
// every couple of seconds when it can't accept commands.
|
||||
//
|
||||
#define HOST_KEEPALIVE_FEATURE // Disable this if your host doesn't like keepalive messages
|
||||
#define DEFAULT_KEEPALIVE_INTERVAL 2 // Number of seconds between "busy" messages. Set with M113.
|
||||
#define DEFAULT_KEEPALIVE_INTERVAL 5 // Number of seconds between "busy" messages. Set with M113.
|
||||
#define BUSY_WHILE_HEATING // Some hosts require "busy" messages even during heating
|
||||
|
||||
//
|
||||
|
|
@ -2062,14 +2065,14 @@
|
|||
// Preheat Constants - Up to 6 are supported without changes
|
||||
//
|
||||
#define PREHEAT_1_LABEL "PLA"
|
||||
#define PREHEAT_1_TEMP_HOTEND 180
|
||||
#define PREHEAT_1_TEMP_BED 70
|
||||
#define PREHEAT_1_TEMP_HOTEND 195
|
||||
#define PREHEAT_1_TEMP_BED 55
|
||||
#define PREHEAT_1_TEMP_CHAMBER 35
|
||||
#define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255
|
||||
|
||||
#define PREHEAT_2_LABEL "ABS"
|
||||
#define PREHEAT_2_TEMP_HOTEND 240
|
||||
#define PREHEAT_2_TEMP_BED 110
|
||||
#define PREHEAT_2_TEMP_HOTEND 230
|
||||
#define PREHEAT_2_TEMP_BED 70
|
||||
#define PREHEAT_2_TEMP_CHAMBER 35
|
||||
#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255
|
||||
|
||||
|
|
@ -2084,14 +2087,14 @@
|
|||
* P1 Raise the nozzle always to Z-park height.
|
||||
* P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS.
|
||||
*/
|
||||
//#define NOZZLE_PARK_FEATURE
|
||||
#define NOZZLE_PARK_FEATURE
|
||||
|
||||
#if ENABLED(NOZZLE_PARK_FEATURE)
|
||||
// Specify a park position as { X, Y, Z_raise }
|
||||
#define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 }
|
||||
#define NOZZLE_PARK_MOVE 0 // Park motion: 0 = XY Move, 1 = X Only, 2 = Y Only, 3 = X before Y, 4 = Y before X
|
||||
#define NOZZLE_PARK_Z_RAISE_MIN 2 // (mm) Always raise Z by at least this distance
|
||||
#define NOZZLE_PARK_XY_FEEDRATE 100 // (mm/s) X and Y axes feedrate (also used for delta Z axis)
|
||||
#define NOZZLE_PARK_XY_FEEDRATE 60 // (mm/s) X and Y axes feedrate (also used for delta Z axis)
|
||||
#define NOZZLE_PARK_Z_FEEDRATE 5 // (mm/s) Z axis feedrate (not used for delta printers)
|
||||
#endif
|
||||
|
||||
|
|
@ -2300,7 +2303,7 @@
|
|||
* SD Card support is disabled by default. If your controller has an SD slot,
|
||||
* you must uncomment the following option or it won't work.
|
||||
*/
|
||||
//#define SDSUPPORT
|
||||
#define SDSUPPORT
|
||||
|
||||
/**
|
||||
* SD CARD: ENABLE CRC
|
||||
|
|
@ -2379,7 +2382,7 @@
|
|||
// If you have a speaker that can produce tones, enable it here.
|
||||
// By default Marlin assumes you have a buzzer with a fixed frequency.
|
||||
//
|
||||
//#define SPEAKER
|
||||
#define SPEAKER
|
||||
|
||||
//
|
||||
// The duration and frequency for the UI feedback sound.
|
||||
|
|
@ -2560,7 +2563,7 @@
|
|||
// RepRapDiscount FULL GRAPHIC Smart Controller
|
||||
// https://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller
|
||||
//
|
||||
//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER
|
||||
#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER
|
||||
|
||||
//
|
||||
// K.3D Full Graphic Smart Controller
|
||||
|
|
|
|||
|
|
@ -21,6 +21,8 @@
|
|||
*/
|
||||
#pragma once
|
||||
|
||||
#define CONFIG_EXAMPLES_DIR "ADIMLab/Gantry v1"
|
||||
|
||||
/**
|
||||
* Configuration_adv.h
|
||||
*
|
||||
|
|
@ -300,7 +302,7 @@
|
|||
/**
|
||||
* As described above, except for the bed (M140/M190/M303).
|
||||
*/
|
||||
#define WATCH_BED_TEMP_PERIOD 60 // Seconds
|
||||
#define WATCH_BED_TEMP_PERIOD 360 // Seconds
|
||||
#define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius
|
||||
#endif
|
||||
|
||||
|
|
@ -662,15 +664,15 @@
|
|||
/**
|
||||
* M355 Case Light on-off / brightness
|
||||
*/
|
||||
//#define CASE_LIGHT_ENABLE
|
||||
#define CASE_LIGHT_ENABLE
|
||||
#if ENABLED(CASE_LIGHT_ENABLE)
|
||||
//#define CASE_LIGHT_PIN 4 // Override the default pin if needed
|
||||
//#define CASE_LIGHT_PIN 8 // Override the default pin if needed
|
||||
#define INVERT_CASE_LIGHT false // Set true if Case Light is ON when pin is LOW
|
||||
#define CASE_LIGHT_DEFAULT_ON true // Set default power-up state on
|
||||
#define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // Set default power-up brightness (0-255, requires PWM pin)
|
||||
//#define CASE_LIGHT_NO_BRIGHTNESS // Disable brightness control. Enable for non-PWM lighting.
|
||||
#define CASE_LIGHT_NO_BRIGHTNESS // Disable brightness control. Enable for non-PWM lighting.
|
||||
//#define CASE_LIGHT_MAX_PWM 128 // Limit PWM duty cycle (0-255)
|
||||
//#define CASE_LIGHT_MENU // Add Case Light options to the LCD menu
|
||||
#define CASE_LIGHT_MENU // Add Case Light options to the LCD menu
|
||||
#if ENABLED(NEOPIXEL_LED)
|
||||
//#define CASE_LIGHT_USE_NEOPIXEL // Use NeoPixel LED as case light
|
||||
#endif
|
||||
|
|
@ -972,7 +974,7 @@
|
|||
|
||||
// On a 300mm bed a 5% grade would give a misalignment of ~1.5cm
|
||||
#define G34_MAX_GRADE 5 // (%) Maximum incline that G34 will handle
|
||||
#define Z_STEPPER_ALIGN_ITERATIONS 5 // Number of iterations to apply during alignment
|
||||
#define Z_STEPPER_ALIGN_ITERATIONS 3 // Number of iterations to apply during alignment
|
||||
#define Z_STEPPER_ALIGN_ACC 0.02 // Stop iterating early if the accuracy is better than this
|
||||
#define RESTORE_LEVELING_AFTER_G34 // Restore leveling after G34 is done?
|
||||
// After G34, re-home Z (G28 Z) or just calculate it from the last probe heights?
|
||||
|
|
@ -1263,8 +1265,8 @@
|
|||
// Change values more rapidly when the encoder is rotated faster
|
||||
#define ENCODER_RATE_MULTIPLIER
|
||||
#if ENABLED(ENCODER_RATE_MULTIPLIER)
|
||||
#define ENCODER_10X_STEPS_PER_SEC 30 // (steps/s) Encoder rate for 10x speed
|
||||
#define ENCODER_100X_STEPS_PER_SEC 80 // (steps/s) Encoder rate for 100x speed
|
||||
#define ENCODER_10X_STEPS_PER_SEC 75 // (steps/s) Encoder rate for 10x speed
|
||||
#define ENCODER_100X_STEPS_PER_SEC 160 // (steps/s) Encoder rate for 100x speed
|
||||
#endif
|
||||
|
||||
// Play a beep when the feedrate is changed from the Status Screen
|
||||
|
|
@ -1333,7 +1335,7 @@
|
|||
|
||||
#if EITHER(HAS_DISPLAY, DWIN_LCD_PROUI)
|
||||
// The timeout to return to the status screen from sub-menus
|
||||
//#define LCD_TIMEOUT_TO_STATUS 15000 // (ms)
|
||||
#define LCD_TIMEOUT_TO_STATUS 60000 // (ms)
|
||||
|
||||
#if ENABLED(SHOW_BOOTSCREEN)
|
||||
#define BOOTSCREEN_TIMEOUT 4000 // (ms) Total Duration to display the boot screen(s)
|
||||
|
|
@ -1343,7 +1345,7 @@
|
|||
#endif
|
||||
|
||||
// Scroll a longer status message into view
|
||||
//#define STATUS_MESSAGE_SCROLLING
|
||||
#define STATUS_MESSAGE_SCROLLING
|
||||
|
||||
// Apply a timeout to low-priority status messages
|
||||
//#define STATUS_MESSAGE_TIMEOUT_SEC 30 // (seconds)
|
||||
|
|
@ -1469,7 +1471,7 @@
|
|||
#define PLR_ENABLED_DEFAULT false // Power Loss Recovery enabled by default. (Set with 'M413 Sn' & M500)
|
||||
//#define BACKUP_POWER_SUPPLY // Backup power / UPS to move the steppers on power loss
|
||||
//#define POWER_LOSS_ZRAISE 2 // (mm) Z axis raise on resume (on power loss with UPS)
|
||||
//#define POWER_LOSS_PIN 44 // Pin to detect power loss. Set to -1 to disable default pin on boards without module.
|
||||
//#define POWER_LOSS_PIN 28 // Pin to detect power loss. Set to -1 to disable default pin on boards without module.
|
||||
//#define POWER_LOSS_STATE HIGH // State of pin indicating power loss
|
||||
//#define POWER_LOSS_PULLUP // Set pullup / pulldown as appropriate for your sensor
|
||||
//#define POWER_LOSS_PULLDOWN
|
||||
|
|
@ -1517,8 +1519,8 @@
|
|||
#define SDSORT_LIMIT 40 // Maximum number of sorted items (10-256). Costs 27 bytes each.
|
||||
#define FOLDER_SORTING -1 // -1=above 0=none 1=below
|
||||
#define SDSORT_GCODE false // Allow turning sorting on/off with LCD and M34 G-code.
|
||||
#define SDSORT_USES_RAM false // Pre-allocate a static array for faster pre-sorting.
|
||||
#define SDSORT_USES_STACK false // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.)
|
||||
#define SDSORT_USES_RAM true // Pre-allocate a static array for faster pre-sorting.
|
||||
#define SDSORT_USES_STACK true // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.)
|
||||
#define SDSORT_CACHE_NAMES false // Keep sorted items in RAM longer for speedy performance. Most expensive option.
|
||||
#define SDSORT_DYNAMIC_RAM false // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use!
|
||||
#define SDSORT_CACHE_VFATS 2 // Maximum number of 13-byte VFAT entries to use for sorting.
|
||||
|
|
@ -1957,7 +1959,7 @@
|
|||
*
|
||||
* Warning: Does not respect endstops!
|
||||
*/
|
||||
//#define BABYSTEPPING
|
||||
#define BABYSTEPPING
|
||||
#if ENABLED(BABYSTEPPING)
|
||||
//#define INTEGRATED_BABYSTEPPING // EXPERIMENTAL integration of babystepping into the Stepper ISR
|
||||
//#define BABYSTEP_WITHOUT_HOMING
|
||||
|
|
@ -2510,14 +2512,14 @@
|
|||
*
|
||||
* Enable PARK_HEAD_ON_PAUSE to add the G-code M125 Pause and Park.
|
||||
*/
|
||||
//#define ADVANCED_PAUSE_FEATURE
|
||||
#define ADVANCED_PAUSE_FEATURE
|
||||
#if ENABLED(ADVANCED_PAUSE_FEATURE)
|
||||
#define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate.
|
||||
#define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract.
|
||||
#define PAUSE_PARK_RETRACT_LENGTH 4 // (mm) Initial retract.
|
||||
// This short retract is done immediately, before parking the nozzle.
|
||||
#define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast.
|
||||
#define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate.
|
||||
#define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload.
|
||||
#define FILAMENT_CHANGE_UNLOAD_LENGTH 0 // (mm) The length of filament for a complete unload.
|
||||
// For Bowden, the full length of the tube and nozzle.
|
||||
// For direct drive, the full length of the nozzle.
|
||||
// Set to 0 for manual unloading.
|
||||
|
|
|
|||
|
|
@ -21,6 +21,8 @@
|
|||
*/
|
||||
#pragma once
|
||||
|
||||
#define CONFIG_EXAMPLES_DIR "ADIMLab/Gantry v2"
|
||||
|
||||
/**
|
||||
* Configuration.h
|
||||
*
|
||||
|
|
@ -60,7 +62,7 @@
|
|||
// @section info
|
||||
|
||||
// Author info of this build printed to the host during boot and M115
|
||||
#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes.
|
||||
#define STRING_CONFIG_H_AUTHOR "(ETE-Design, Gantry v2)" // Who made the changes.
|
||||
//#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes)
|
||||
|
||||
/**
|
||||
|
|
@ -78,7 +80,7 @@
|
|||
#define SHOW_BOOTSCREEN
|
||||
|
||||
// Show the bitmap in Marlin/_Bootscreen.h on startup.
|
||||
//#define SHOW_CUSTOM_BOOTSCREEN
|
||||
#define SHOW_CUSTOM_BOOTSCREEN
|
||||
|
||||
// Show the bitmap in Marlin/_Statusscreen.h on the status screen.
|
||||
//#define CUSTOM_STATUS_SCREEN_IMAGE
|
||||
|
|
@ -87,7 +89,7 @@
|
|||
|
||||
// Choose the name from boards.h that matches your setup
|
||||
#ifndef MOTHERBOARD
|
||||
#define MOTHERBOARD BOARD_RAMPS_14_EFB
|
||||
#define MOTHERBOARD BOARD_HJC2560C_REV2
|
||||
#endif
|
||||
|
||||
/**
|
||||
|
|
@ -134,7 +136,7 @@
|
|||
//#define BLUETOOTH
|
||||
|
||||
// Name displayed in the LCD "Ready" message and Info menu
|
||||
//#define CUSTOM_MACHINE_NAME "3D Printer"
|
||||
#define CUSTOM_MACHINE_NAME "ADIMLab Gantry v2"
|
||||
|
||||
// Printer's unique ID, used by some programs to differentiate between machines.
|
||||
// Choose your own or use a service like https://www.uuidgenerator.net/version4
|
||||
|
|
@ -516,7 +518,7 @@
|
|||
#define TEMP_SENSOR_5 0
|
||||
#define TEMP_SENSOR_6 0
|
||||
#define TEMP_SENSOR_7 0
|
||||
#define TEMP_SENSOR_BED 0
|
||||
#define TEMP_SENSOR_BED 1
|
||||
#define TEMP_SENSOR_PROBE 0
|
||||
#define TEMP_SENSOR_CHAMBER 0
|
||||
#define TEMP_SENSOR_COOLER 0
|
||||
|
|
@ -1024,9 +1026,9 @@
|
|||
#endif
|
||||
|
||||
// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup).
|
||||
#define X_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop.
|
||||
#define Y_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop.
|
||||
#define Z_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop.
|
||||
#define X_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop.
|
||||
#define Y_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop.
|
||||
#define Z_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop.
|
||||
#define I_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop.
|
||||
#define J_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop.
|
||||
#define K_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop.
|
||||
|
|
@ -1036,7 +1038,7 @@
|
|||
#define I_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop.
|
||||
#define J_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop.
|
||||
#define K_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop.
|
||||
#define Z_MIN_PROBE_ENDSTOP_INVERTING false // Set to true to invert the logic of the probe.
|
||||
#define Z_MIN_PROBE_ENDSTOP_INVERTING true // Set to true to invert the logic of the probe.
|
||||
|
||||
// Enable this feature if all enabled endstop pins are interrupt-capable.
|
||||
// This will remove the need to poll the interrupt pins, saving many CPU cycles.
|
||||
|
|
@ -1084,7 +1086,7 @@
|
|||
* Override with M92
|
||||
* X, Y, Z [, I [, J [, K]]], E0 [, E1[, E2...]]
|
||||
*/
|
||||
#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 500 }
|
||||
#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 4000, 100 }
|
||||
|
||||
/**
|
||||
* Default Max Feed Rate (mm/s)
|
||||
|
|
@ -1187,7 +1189,7 @@
|
|||
* The probe replaces the Z-MIN endstop and is used for Z homing.
|
||||
* (Automatically enables USE_PROBE_FOR_Z_HOMING.)
|
||||
*/
|
||||
#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN
|
||||
//#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN
|
||||
|
||||
// Force the use of the probe for Z-axis homing
|
||||
//#define USE_PROBE_FOR_Z_HOMING
|
||||
|
|
@ -1526,7 +1528,7 @@
|
|||
// @section machine
|
||||
|
||||
// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way.
|
||||
#define INVERT_X_DIR false
|
||||
#define INVERT_X_DIR true
|
||||
#define INVERT_Y_DIR true
|
||||
#define INVERT_Z_DIR false
|
||||
//#define INVERT_I_DIR false
|
||||
|
|
@ -1574,16 +1576,16 @@
|
|||
// @section machine
|
||||
|
||||
// The size of the printable area
|
||||
#define X_BED_SIZE 200
|
||||
#define Y_BED_SIZE 200
|
||||
#define X_BED_SIZE 310
|
||||
#define Y_BED_SIZE 310
|
||||
|
||||
// Travel limits (mm) after homing, corresponding to endstop positions.
|
||||
#define X_MIN_POS 0
|
||||
#define Y_MIN_POS 0
|
||||
#define Z_MIN_POS 0
|
||||
#define X_MIN_POS -5
|
||||
#define Y_MIN_POS -10
|
||||
#define Z_MIN_POS -3
|
||||
#define X_MAX_POS X_BED_SIZE
|
||||
#define Y_MAX_POS Y_BED_SIZE
|
||||
#define Z_MAX_POS 200
|
||||
#define Z_MAX_POS 410
|
||||
//#define I_MIN_POS 0
|
||||
//#define I_MAX_POS 50
|
||||
//#define J_MIN_POS 0
|
||||
|
|
@ -1601,7 +1603,7 @@
|
|||
*/
|
||||
|
||||
// Min software endstops constrain movement within minimum coordinate bounds
|
||||
#define MIN_SOFTWARE_ENDSTOPS
|
||||
//#define MIN_SOFTWARE_ENDSTOPS
|
||||
#if ENABLED(MIN_SOFTWARE_ENDSTOPS)
|
||||
#define MIN_SOFTWARE_ENDSTOP_X
|
||||
#define MIN_SOFTWARE_ENDSTOP_Y
|
||||
|
|
@ -1612,7 +1614,7 @@
|
|||
#endif
|
||||
|
||||
// Max software endstops constrain movement within maximum coordinate bounds
|
||||
#define MAX_SOFTWARE_ENDSTOPS
|
||||
//#define MAX_SOFTWARE_ENDSTOPS
|
||||
#if ENABLED(MAX_SOFTWARE_ENDSTOPS)
|
||||
#define MAX_SOFTWARE_ENDSTOP_X
|
||||
#define MAX_SOFTWARE_ENDSTOP_Y
|
||||
|
|
@ -1639,10 +1641,11 @@
|
|||
* RAMPS-based boards use SERVO3_PIN for the first runout sensor.
|
||||
* For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc.
|
||||
*/
|
||||
//#define FILAMENT_RUNOUT_SENSOR
|
||||
#define FILAMENT_RUNOUT_SENSOR
|
||||
#if ENABLED(FILAMENT_RUNOUT_SENSOR)
|
||||
#define FIL_RUNOUT_ENABLED_DEFAULT true // Enable the sensor on startup. Override with M412 followed by M500.
|
||||
#define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each.
|
||||
#define FIL_RUNOUT_PIN 24
|
||||
|
||||
#define FIL_RUNOUT_STATE LOW // Pin state indicating that filament is NOT present.
|
||||
#define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins.
|
||||
|
|
@ -2027,7 +2030,7 @@
|
|||
* M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes)
|
||||
* M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.)
|
||||
*/
|
||||
//#define EEPROM_SETTINGS // Persistent storage with M500 and M501
|
||||
#define EEPROM_SETTINGS // Persistent storage with M500 and M501
|
||||
//#define DISABLE_M503 // Saves ~2700 bytes of flash. Disable for release!
|
||||
#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM.
|
||||
#define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load
|
||||
|
|
@ -2084,14 +2087,14 @@
|
|||
* P1 Raise the nozzle always to Z-park height.
|
||||
* P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS.
|
||||
*/
|
||||
//#define NOZZLE_PARK_FEATURE
|
||||
#define NOZZLE_PARK_FEATURE
|
||||
|
||||
#if ENABLED(NOZZLE_PARK_FEATURE)
|
||||
// Specify a park position as { X, Y, Z_raise }
|
||||
#define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 }
|
||||
#define NOZZLE_PARK_MOVE 0 // Park motion: 0 = XY Move, 1 = X Only, 2 = Y Only, 3 = X before Y, 4 = Y before X
|
||||
#define NOZZLE_PARK_Z_RAISE_MIN 2 // (mm) Always raise Z by at least this distance
|
||||
#define NOZZLE_PARK_XY_FEEDRATE 100 // (mm/s) X and Y axes feedrate (also used for delta Z axis)
|
||||
#define NOZZLE_PARK_XY_FEEDRATE 60 // (mm/s) X and Y axes feedrate (also used for delta Z axis)
|
||||
#define NOZZLE_PARK_Z_FEEDRATE 5 // (mm/s) Z axis feedrate (not used for delta printers)
|
||||
#endif
|
||||
|
||||
|
|
@ -2300,14 +2303,14 @@
|
|||
* SD Card support is disabled by default. If your controller has an SD slot,
|
||||
* you must uncomment the following option or it won't work.
|
||||
*/
|
||||
//#define SDSUPPORT
|
||||
#define SDSUPPORT
|
||||
|
||||
/**
|
||||
* SD CARD: ENABLE CRC
|
||||
*
|
||||
* Use CRC checks and retries on the SD communication.
|
||||
*/
|
||||
//#define SD_CHECK_AND_RETRY
|
||||
#define SD_CHECK_AND_RETRY
|
||||
|
||||
/**
|
||||
* LCD Menu Items
|
||||
|
|
@ -2347,7 +2350,7 @@
|
|||
//
|
||||
// Set this option if CLOCKWISE causes values to DECREASE
|
||||
//
|
||||
//#define REVERSE_ENCODER_DIRECTION
|
||||
#define REVERSE_ENCODER_DIRECTION
|
||||
|
||||
//
|
||||
// This option reverses the encoder direction for navigating LCD menus.
|
||||
|
|
@ -2355,7 +2358,7 @@
|
|||
// If CLOCKWISE normally moves DOWN this makes it go UP.
|
||||
// If CLOCKWISE normally moves UP this makes it go DOWN.
|
||||
//
|
||||
//#define REVERSE_MENU_DIRECTION
|
||||
#define REVERSE_MENU_DIRECTION
|
||||
|
||||
//
|
||||
// This option reverses the encoder direction for Select Screen.
|
||||
|
|
@ -2560,7 +2563,7 @@
|
|||
// RepRapDiscount FULL GRAPHIC Smart Controller
|
||||
// https://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller
|
||||
//
|
||||
//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER
|
||||
#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER
|
||||
|
||||
//
|
||||
// K.3D Full Graphic Smart Controller
|
||||
|
|
|
|||
|
|
@ -21,6 +21,8 @@
|
|||
*/
|
||||
#pragma once
|
||||
|
||||
#define CONFIG_EXAMPLES_DIR "ADIMLab/Gantry v2"
|
||||
|
||||
/**
|
||||
* Configuration_adv.h
|
||||
*
|
||||
|
|
@ -662,9 +664,9 @@
|
|||
/**
|
||||
* M355 Case Light on-off / brightness
|
||||
*/
|
||||
//#define CASE_LIGHT_ENABLE
|
||||
#define CASE_LIGHT_ENABLE
|
||||
#if ENABLED(CASE_LIGHT_ENABLE)
|
||||
//#define CASE_LIGHT_PIN 4 // Override the default pin if needed
|
||||
#define CASE_LIGHT_PIN 8 // Override the default pin if needed
|
||||
#define INVERT_CASE_LIGHT false // Set true if Case Light is ON when pin is LOW
|
||||
#define CASE_LIGHT_DEFAULT_ON true // Set default power-up state on
|
||||
#define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // Set default power-up brightness (0-255, requires PWM pin)
|
||||
|
|
@ -972,7 +974,7 @@
|
|||
|
||||
// On a 300mm bed a 5% grade would give a misalignment of ~1.5cm
|
||||
#define G34_MAX_GRADE 5 // (%) Maximum incline that G34 will handle
|
||||
#define Z_STEPPER_ALIGN_ITERATIONS 5 // Number of iterations to apply during alignment
|
||||
#define Z_STEPPER_ALIGN_ITERATIONS 3 // Number of iterations to apply during alignment
|
||||
#define Z_STEPPER_ALIGN_ACC 0.02 // Stop iterating early if the accuracy is better than this
|
||||
#define RESTORE_LEVELING_AFTER_G34 // Restore leveling after G34 is done?
|
||||
// After G34, re-home Z (G28 Z) or just calculate it from the last probe heights?
|
||||
|
|
@ -1957,7 +1959,7 @@
|
|||
*
|
||||
* Warning: Does not respect endstops!
|
||||
*/
|
||||
//#define BABYSTEPPING
|
||||
#define BABYSTEPPING
|
||||
#if ENABLED(BABYSTEPPING)
|
||||
//#define INTEGRATED_BABYSTEPPING // EXPERIMENTAL integration of babystepping into the Stepper ISR
|
||||
//#define BABYSTEP_WITHOUT_HOMING
|
||||
|
|
@ -2510,7 +2512,7 @@
|
|||
*
|
||||
* Enable PARK_HEAD_ON_PAUSE to add the G-code M125 Pause and Park.
|
||||
*/
|
||||
//#define ADVANCED_PAUSE_FEATURE
|
||||
#define ADVANCED_PAUSE_FEATURE
|
||||
#if ENABLED(ADVANCED_PAUSE_FEATURE)
|
||||
#define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate.
|
||||
#define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract.
|
||||
|
|
|
|||
Loading…
Add table
Add a link
Reference in a new issue