UBL_HILBERT_CURVE

MarlinFirmware/Marlin#21387

config/default/Configuration.h

@@ -1484,6 +1484,8 @@
   #define GRID_MAX_POINTS_X 10      // Don't use more than 15 points per axis, implementation limited.
   #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
 
+  //#define UBL_HILBERT_CURVE       // Use Hilbert distribution for less travel when probing multiple points
+
   #define UBL_MESH_EDIT_MOVES_Z     // Sophisticated users prefer no movement of nozzle
   #define UBL_SAVE_ACTIVE_ON_M500   // Save the currently active mesh in the current slot on M500
 

config/examples/3DFabXYZ/Migbot/Configuration.h

@@ -1486,6 +1486,8 @@
   #define GRID_MAX_POINTS_X 10      // Don't use more than 15 points per axis, implementation limited.
   #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
 
+  //#define UBL_HILBERT_CURVE       // Use Hilbert distribution for less travel when probing multiple points
+
   #define UBL_MESH_EDIT_MOVES_Z     // Sophisticated users prefer no movement of nozzle
   #define UBL_SAVE_ACTIVE_ON_M500   // Save the currently active mesh in the current slot on M500
 

config/examples/ADIMLab/Gantry v1/Configuration.h

@@ -1485,6 +1485,8 @@
   #define GRID_MAX_POINTS_X 10      // Don't use more than 15 points per axis, implementation limited.
   #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
 
+  //#define UBL_HILBERT_CURVE       // Use Hilbert distribution for less travel when probing multiple points
+
   #define UBL_MESH_EDIT_MOVES_Z     // Sophisticated users prefer no movement of nozzle
   #define UBL_SAVE_ACTIVE_ON_M500   // Save the currently active mesh in the current slot on M500
 

config/examples/ADIMLab/Gantry v2/Configuration.h

@@ -1485,6 +1485,8 @@
   #define GRID_MAX_POINTS_X 10      // Don't use more than 15 points per axis, implementation limited.
   #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
 
+  //#define UBL_HILBERT_CURVE       // Use Hilbert distribution for less travel when probing multiple points
+
   #define UBL_MESH_EDIT_MOVES_Z     // Sophisticated users prefer no movement of nozzle
   #define UBL_SAVE_ACTIVE_ON_M500   // Save the currently active mesh in the current slot on M500
 

config/examples/AlephObjects/TAZ4/Configuration.h

@@ -1495,6 +1495,8 @@
   #define GRID_MAX_POINTS_X 10      // Don't use more than 15 points per axis, implementation limited.
   #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
 
+  //#define UBL_HILBERT_CURVE       // Use Hilbert distribution for less travel when probing multiple points
+
   #define UBL_MESH_EDIT_MOVES_Z     // Sophisticated users prefer no movement of nozzle
   #define UBL_SAVE_ACTIVE_ON_M500   // Save the currently active mesh in the current slot on M500
 

config/examples/Alfawise/U20-bltouch/Configuration.h

@@ -1554,6 +1554,8 @@
   #define GRID_MAX_POINTS_X 5       // Don't use more than 15 points per axis, implementation limited.
   #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
 
+  //#define UBL_HILBERT_CURVE       // Use Hilbert distribution for less travel when probing multiple points
+
   #define UBL_MESH_EDIT_MOVES_Z     // Sophisticated users prefer no movement of nozzle
   #define UBL_SAVE_ACTIVE_ON_M500   // Save the currently active mesh in the current slot on M500
 

config/examples/Alfawise/U20/Configuration.h

@@ -1556,6 +1556,8 @@
   #define GRID_MAX_POINTS_X 10      // Don't use more than 15 points per axis, implementation limited.
   #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
 
+  //#define UBL_HILBERT_CURVE       // Use Hilbert distribution for less travel when probing multiple points
+
   #define UBL_MESH_EDIT_MOVES_Z     // Sophisticated users prefer no movement of nozzle
   #define UBL_SAVE_ACTIVE_ON_M500   // Save the currently active mesh in the current slot on M500
 

config/examples/AliExpress/CL-260/Configuration.h

@@ -1484,6 +1484,8 @@
   #define GRID_MAX_POINTS_X 10      // Don't use more than 15 points per axis, implementation limited.
   #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
 
+  //#define UBL_HILBERT_CURVE       // Use Hilbert distribution for less travel when probing multiple points
+
   #define UBL_MESH_EDIT_MOVES_Z     // Sophisticated users prefer no movement of nozzle
   #define UBL_SAVE_ACTIVE_ON_M500   // Save the currently active mesh in the current slot on M500
 

config/examples/AliExpress/UM2pExt/Configuration.h

@@ -1485,6 +1485,8 @@
   #define GRID_MAX_POINTS_X 10      // Don't use more than 15 points per axis, implementation limited.
   #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
 
+  //#define UBL_HILBERT_CURVE       // Use Hilbert distribution for less travel when probing multiple points
+
   #define UBL_MESH_EDIT_MOVES_Z     // Sophisticated users prefer no movement of nozzle
   #define UBL_SAVE_ACTIVE_ON_M500   // Save the currently active mesh in the current slot on M500
 

config/examples/Anet/A2/Configuration.h

@@ -1484,6 +1484,8 @@
   #define GRID_MAX_POINTS_X 10      // Don't use more than 15 points per axis, implementation limited.
   #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
 
+  //#define UBL_HILBERT_CURVE       // Use Hilbert distribution for less travel when probing multiple points
+
   #define UBL_MESH_EDIT_MOVES_Z     // Sophisticated users prefer no movement of nozzle
   #define UBL_SAVE_ACTIVE_ON_M500   // Save the currently active mesh in the current slot on M500
 

config/examples/Anet/A2plus/Configuration.h

@@ -1484,6 +1484,8 @@
   #define GRID_MAX_POINTS_X 10      // Don't use more than 15 points per axis, implementation limited.
   #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
 
+  //#define UBL_HILBERT_CURVE       // Use Hilbert distribution for less travel when probing multiple points
+
   #define UBL_MESH_EDIT_MOVES_Z     // Sophisticated users prefer no movement of nozzle
   #define UBL_SAVE_ACTIVE_ON_M500   // Save the currently active mesh in the current slot on M500
 

config/examples/Anet/A6/Configuration.h

@@ -1558,6 +1558,8 @@
   #define GRID_MAX_POINTS_X 10      // Don't use more than 15 points per axis, implementation limited.
   #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
 
+  //#define UBL_HILBERT_CURVE       // Use Hilbert distribution for less travel when probing multiple points
+
   #define UBL_MESH_EDIT_MOVES_Z     // Sophisticated users prefer no movement of nozzle
   #define UBL_SAVE_ACTIVE_ON_M500   // Save the currently active mesh in the current slot on M500
 

config/examples/Anet/A8/Configuration.h

@@ -1487,6 +1487,8 @@
   #define GRID_MAX_POINTS_X 10      // Don't use more than 15 points per axis, implementation limited.
   #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
 
+  //#define UBL_HILBERT_CURVE       // Use Hilbert distribution for less travel when probing multiple points
+
   #define UBL_MESH_EDIT_MOVES_Z     // Sophisticated users prefer no movement of nozzle
   #define UBL_SAVE_ACTIVE_ON_M500   // Save the currently active mesh in the current slot on M500
 

config/examples/Anet/A8plus/Configuration.h

@@ -1486,6 +1486,8 @@
   #define GRID_MAX_POINTS_X 10      // Don't use more than 15 points per axis, implementation limited.
   #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
 
+  //#define UBL_HILBERT_CURVE       // Use Hilbert distribution for less travel when probing multiple points
+
   #define UBL_MESH_EDIT_MOVES_Z     // Sophisticated users prefer no movement of nozzle
   #define UBL_SAVE_ACTIVE_ON_M500   // Save the currently active mesh in the current slot on M500
 

config/examples/Anet/A9/Configuration.h

@@ -1484,6 +1484,8 @@
   #define GRID_MAX_POINTS_X 10      // Don't use more than 15 points per axis, implementation limited.
   #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
 
+  //#define UBL_HILBERT_CURVE       // Use Hilbert distribution for less travel when probing multiple points
+
   #define UBL_MESH_EDIT_MOVES_Z     // Sophisticated users prefer no movement of nozzle
   #define UBL_SAVE_ACTIVE_ON_M500   // Save the currently active mesh in the current slot on M500
 

config/examples/Anet/E10/Configuration.h

@@ -1484,6 +1484,8 @@
   #define GRID_MAX_POINTS_X 10      // Don't use more than 15 points per axis, implementation limited.
   #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
 
+  //#define UBL_HILBERT_CURVE       // Use Hilbert distribution for less travel when probing multiple points
+
   #define UBL_MESH_EDIT_MOVES_Z     // Sophisticated users prefer no movement of nozzle
   #define UBL_SAVE_ACTIVE_ON_M500   // Save the currently active mesh in the current slot on M500
 

config/examples/Anet/E16/BTT SKR 1.3/Configuration.h

@@ -1486,6 +1486,8 @@
   #define GRID_MAX_POINTS_X 10      // Don't use more than 15 points per axis, implementation limited.
   #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
 
+  //#define UBL_HILBERT_CURVE       // Use Hilbert distribution for less travel when probing multiple points
+
   #define UBL_MESH_EDIT_MOVES_Z     // Sophisticated users prefer no movement of nozzle
   #define UBL_SAVE_ACTIVE_ON_M500   // Save the currently active mesh in the current slot on M500
 

config/examples/Anet/E16/Stock/Configuration.h

@@ -1486,6 +1486,8 @@
   #define GRID_MAX_POINTS_X 10      // Don't use more than 15 points per axis, implementation limited.
   #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
 
+  //#define UBL_HILBERT_CURVE       // Use Hilbert distribution for less travel when probing multiple points
+
   #define UBL_MESH_EDIT_MOVES_Z     // Sophisticated users prefer no movement of nozzle
   #define UBL_SAVE_ACTIVE_ON_M500   // Save the currently active mesh in the current slot on M500
 

config/examples/Anet/ET4+/Configuration.h

@@ -1490,6 +1490,8 @@
   #define GRID_MAX_POINTS_X 10      // Don't use more than 15 points per axis, implementation limited.
   #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
 
+  //#define UBL_HILBERT_CURVE       // Use Hilbert distribution for less travel when probing multiple points
+
   #define UBL_MESH_EDIT_MOVES_Z     // Sophisticated users prefer no movement of nozzle
   #define UBL_SAVE_ACTIVE_ON_M500   // Save the currently active mesh in the current slot on M500
 

config/examples/Anet/ET4-Pro/Configuration.h

@@ -1490,6 +1490,8 @@
   #define GRID_MAX_POINTS_X 10      // Don't use more than 15 points per axis, implementation limited.
   #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
 
+  //#define UBL_HILBERT_CURVE       // Use Hilbert distribution for less travel when probing multiple points
+
   #define UBL_MESH_EDIT_MOVES_Z     // Sophisticated users prefer no movement of nozzle
   #define UBL_SAVE_ACTIVE_ON_M500   // Save the currently active mesh in the current slot on M500
 

config/examples/Anet/ET4/Configuration.h

@@ -1490,6 +1490,8 @@
   #define GRID_MAX_POINTS_X 10      // Don't use more than 15 points per axis, implementation limited.
   #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
 
+  //#define UBL_HILBERT_CURVE       // Use Hilbert distribution for less travel when probing multiple points
+
   #define UBL_MESH_EDIT_MOVES_Z     // Sophisticated users prefer no movement of nozzle
   #define UBL_SAVE_ACTIVE_ON_M500   // Save the currently active mesh in the current slot on M500
 

config/examples/Anet/ET4X/Configuration.h

@@ -1490,6 +1490,8 @@
   #define GRID_MAX_POINTS_X 10      // Don't use more than 15 points per axis, implementation limited.
   #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
 
+  //#define UBL_HILBERT_CURVE       // Use Hilbert distribution for less travel when probing multiple points
+
   #define UBL_MESH_EDIT_MOVES_Z     // Sophisticated users prefer no movement of nozzle
   #define UBL_SAVE_ACTIVE_ON_M500   // Save the currently active mesh in the current slot on M500
 

config/examples/Anet/ET5-Pro/Configuration.h

@@ -1478,6 +1478,8 @@
   #define GRID_MAX_POINTS_X 10      // Don't use more than 15 points per axis, implementation limited.
   #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
 
+  //#define UBL_HILBERT_CURVE       // Use Hilbert distribution for less travel when probing multiple points
+
   #define UBL_MESH_EDIT_MOVES_Z     // Sophisticated users prefer no movement of nozzle
   #define UBL_SAVE_ACTIVE_ON_M500   // Save the currently active mesh in the current slot on M500
 

config/examples/Anet/ET5/Configuration.h

@@ -1478,6 +1478,8 @@
   #define GRID_MAX_POINTS_X 10      // Don't use more than 15 points per axis, implementation limited.
   #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
 
+  //#define UBL_HILBERT_CURVE       // Use Hilbert distribution for less travel when probing multiple points
+
   #define UBL_MESH_EDIT_MOVES_Z     // Sophisticated users prefer no movement of nozzle
   #define UBL_SAVE_ACTIVE_ON_M500   // Save the currently active mesh in the current slot on M500
 

config/examples/Anet/ET5X/Configuration.h

@@ -1478,6 +1478,8 @@
   #define GRID_MAX_POINTS_X 10      // Don't use more than 15 points per axis, implementation limited.
   #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
 
+  //#define UBL_HILBERT_CURVE       // Use Hilbert distribution for less travel when probing multiple points
+
   #define UBL_MESH_EDIT_MOVES_Z     // Sophisticated users prefer no movement of nozzle
   #define UBL_SAVE_ACTIVE_ON_M500   // Save the currently active mesh in the current slot on M500
 

config/examples/AnyCubic/Chiron/Configuration.h

@@ -1488,6 +1488,8 @@
   #define GRID_MAX_POINTS_X 10      // Don't use more than 15 points per axis, implementation limited.
   #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
 
+  //#define UBL_HILBERT_CURVE       // Use Hilbert distribution for less travel when probing multiple points
+
   #define UBL_MESH_EDIT_MOVES_Z     // Sophisticated users prefer no movement of nozzle
   #define UBL_SAVE_ACTIVE_ON_M500   // Save the currently active mesh in the current slot on M500
 

config/examples/AnyCubic/Mega Zero/Anycubic V1/Configuration.h

@@ -1486,6 +1486,8 @@
   #define GRID_MAX_POINTS_X 10      // Don't use more than 15 points per axis, implementation limited.
   #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
 
+  //#define UBL_HILBERT_CURVE       // Use Hilbert distribution for less travel when probing multiple points
+
   #define UBL_MESH_EDIT_MOVES_Z     // Sophisticated users prefer no movement of nozzle
   #define UBL_SAVE_ACTIVE_ON_M500   // Save the currently active mesh in the current slot on M500
 

config/examples/AnyCubic/Mega Zero/BigTreeTech SKR Mini MZ V1.0/Configuration.h

@@ -1484,6 +1484,8 @@
   #define GRID_MAX_POINTS_X 10      // Don't use more than 15 points per axis, implementation limited.
   #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
 
+  //#define UBL_HILBERT_CURVE       // Use Hilbert distribution for less travel when probing multiple points
+
   #define UBL_MESH_EDIT_MOVES_Z     // Sophisticated users prefer no movement of nozzle
   #define UBL_SAVE_ACTIVE_ON_M500   // Save the currently active mesh in the current slot on M500
 

config/examples/AnyCubic/i3 Mega/Configuration.h

@@ -1504,6 +1504,8 @@
   #define GRID_MAX_POINTS_X 10      // Don't use more than 15 points per axis, implementation limited.
   #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
 
+  //#define UBL_HILBERT_CURVE       // Use Hilbert distribution for less travel when probing multiple points
+
   #define UBL_MESH_EDIT_MOVES_Z     // Sophisticated users prefer no movement of nozzle
   #define UBL_SAVE_ACTIVE_ON_M500   // Save the currently active mesh in the current slot on M500
 

config/examples/AnyCubic/i3/Configuration.h

@@ -1484,6 +1484,8 @@
   #define GRID_MAX_POINTS_X 10      // Don't use more than 15 points per axis, implementation limited.
   #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
 
+  //#define UBL_HILBERT_CURVE       // Use Hilbert distribution for less travel when probing multiple points
+
   #define UBL_MESH_EDIT_MOVES_Z     // Sophisticated users prefer no movement of nozzle
   #define UBL_SAVE_ACTIVE_ON_M500   // Save the currently active mesh in the current slot on M500
 

config/examples/ArmEd/Configuration.h

@@ -1485,6 +1485,8 @@
   #define GRID_MAX_POINTS_X 10      // Don't use more than 15 points per axis, implementation limited.
   #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
 
+  //#define UBL_HILBERT_CURVE       // Use Hilbert distribution for less travel when probing multiple points
+
   #define UBL_MESH_EDIT_MOVES_Z     // Sophisticated users prefer no movement of nozzle
   #define UBL_SAVE_ACTIVE_ON_M500   // Save the currently active mesh in the current slot on M500
 

config/examples/Artillery/Genius/Configuration.h

@@ -1484,6 +1484,8 @@
   #define GRID_MAX_POINTS_X 10      // Don't use more than 15 points per axis, implementation limited.
   #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
 
+  //#define UBL_HILBERT_CURVE       // Use Hilbert distribution for less travel when probing multiple points
+
   #define UBL_MESH_EDIT_MOVES_Z     // Sophisticated users prefer no movement of nozzle
   #define UBL_SAVE_ACTIVE_ON_M500   // Save the currently active mesh in the current slot on M500
 

config/examples/Artillery/Sidewinder X1/Configuration.h

@@ -1484,6 +1484,8 @@
   #define GRID_MAX_POINTS_X 10      // Don't use more than 15 points per axis, implementation limited.
   #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
 
+  //#define UBL_HILBERT_CURVE       // Use Hilbert distribution for less travel when probing multiple points
+
   #define UBL_MESH_EDIT_MOVES_Z     // Sophisticated users prefer no movement of nozzle
   #define UBL_SAVE_ACTIVE_ON_M500   // Save the currently active mesh in the current slot on M500
 

config/examples/Artillery/Sidewinder X1_0.9_degree_BMG_E3D_V6/Configuration.h

@@ -1500,6 +1500,8 @@
   #define GRID_MAX_POINTS_X 10      // Don't use more than 15 points per axis, implementation limited.
   #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
 
+  //#define UBL_HILBERT_CURVE       // Use Hilbert distribution for less travel when probing multiple points
+
   #define UBL_MESH_EDIT_MOVES_Z     // Sophisticated users prefer no movement of nozzle
   #define UBL_SAVE_ACTIVE_ON_M500   // Save the currently active mesh in the current slot on M500
 

config/examples/Azteeg/X5GT/Configuration.h

@@ -1484,6 +1484,8 @@
   #define GRID_MAX_POINTS_X 10      // Don't use more than 15 points per axis, implementation limited.
   #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
 
+  //#define UBL_HILBERT_CURVE       // Use Hilbert distribution for less travel when probing multiple points
+
   #define UBL_MESH_EDIT_MOVES_Z     // Sophisticated users prefer no movement of nozzle
   #define UBL_SAVE_ACTIVE_ON_M500   // Save the currently active mesh in the current slot on M500
 

config/examples/BIBO/TouchX/cyclops/Configuration.h

@@ -1484,6 +1484,8 @@
   #define GRID_MAX_POINTS_X 10      // Don't use more than 15 points per axis, implementation limited.
   #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
 
+  //#define UBL_HILBERT_CURVE       // Use Hilbert distribution for less travel when probing multiple points
+
   #define UBL_MESH_EDIT_MOVES_Z     // Sophisticated users prefer no movement of nozzle
   #define UBL_SAVE_ACTIVE_ON_M500   // Save the currently active mesh in the current slot on M500
 

config/examples/BIBO/TouchX/default/Configuration.h

@@ -1440,6 +1440,8 @@
   #define GRID_MAX_POINTS_X 10      // Don't use more than 15 points per axis, implementation limited.
   #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
 
+  //#define UBL_HILBERT_CURVE       // Use Hilbert distribution for less travel when probing multiple points
+
   #define UBL_MESH_EDIT_MOVES_Z     // Sophisticated users prefer no movement of nozzle
   #define UBL_SAVE_ACTIVE_ON_M500   // Save the currently active mesh in the current slot on M500
 

config/examples/BIQU/B1-BLTouch/Configuration.h

@@ -1484,6 +1484,8 @@
   #define GRID_MAX_POINTS_X 10      // Don't use more than 15 points per axis, implementation limited.
   #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
 
+  //#define UBL_HILBERT_CURVE       // Use Hilbert distribution for less travel when probing multiple points
+
   #define UBL_MESH_EDIT_MOVES_Z     // Sophisticated users prefer no movement of nozzle
   #define UBL_SAVE_ACTIVE_ON_M500   // Save the currently active mesh in the current slot on M500
 

config/examples/BIQU/B1/Configuration.h

@@ -1484,6 +1484,8 @@
   #define GRID_MAX_POINTS_X 10      // Don't use more than 15 points per axis, implementation limited.
   #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
 
+  //#define UBL_HILBERT_CURVE       // Use Hilbert distribution for less travel when probing multiple points
+
   #define UBL_MESH_EDIT_MOVES_Z     // Sophisticated users prefer no movement of nozzle
   #define UBL_SAVE_ACTIVE_ON_M500   // Save the currently active mesh in the current slot on M500
 

config/examples/BQ/Hephestos/Configuration.h

@@ -1485,6 +1485,8 @@
   #define GRID_MAX_POINTS_X 10      // Don't use more than 15 points per axis, implementation limited.
   #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
 
+  //#define UBL_HILBERT_CURVE       // Use Hilbert distribution for less travel when probing multiple points
+
   #define UBL_MESH_EDIT_MOVES_Z     // Sophisticated users prefer no movement of nozzle
   #define UBL_SAVE_ACTIVE_ON_M500   // Save the currently active mesh in the current slot on M500
 

config/examples/BQ/Hephestos_2/Configuration.h

@@ -1498,6 +1498,8 @@
   #define GRID_MAX_POINTS_X 10      // Don't use more than 15 points per axis, implementation limited.
   #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
 
+  //#define UBL_HILBERT_CURVE       // Use Hilbert distribution for less travel when probing multiple points
+
   #define UBL_MESH_EDIT_MOVES_Z     // Sophisticated users prefer no movement of nozzle
   #define UBL_SAVE_ACTIVE_ON_M500   // Save the currently active mesh in the current slot on M500
 

config/examples/BQ/WITBOX/Configuration.h

@@ -1485,6 +1485,8 @@
   #define GRID_MAX_POINTS_X 10      // Don't use more than 15 points per axis, implementation limited.
   #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
 
+  //#define UBL_HILBERT_CURVE       // Use Hilbert distribution for less travel when probing multiple points
+
   #define UBL_MESH_EDIT_MOVES_Z     // Sophisticated users prefer no movement of nozzle
   #define UBL_SAVE_ACTIVE_ON_M500   // Save the currently active mesh in the current slot on M500
 

config/examples/CTC/i3 2560 Rev A/no probe/Configuration.h

@@ -1485,6 +1485,8 @@
   #define GRID_MAX_POINTS_X 10      // Don't use more than 15 points per axis, implementation limited.
   #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
 
+  //#define UBL_HILBERT_CURVE       // Use Hilbert distribution for less travel when probing multiple points
+
   #define UBL_MESH_EDIT_MOVES_Z     // Sophisticated users prefer no movement of nozzle
   #define UBL_SAVE_ACTIVE_ON_M500   // Save the currently active mesh in the current slot on M500
 

config/examples/Cartesio/Configuration.h

@@ -1500,6 +1500,8 @@
   #define GRID_MAX_POINTS_X 10      // Don't use more than 15 points per axis, implementation limited.
   #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
 
+  //#define UBL_HILBERT_CURVE       // Use Hilbert distribution for less travel when probing multiple points
+
   #define UBL_MESH_EDIT_MOVES_Z     // Sophisticated users prefer no movement of nozzle
   #define UBL_SAVE_ACTIVE_ON_M500   // Save the currently active mesh in the current slot on M500
 

config/examples/Copymaster3D/300/Configuration.h

@@ -1485,6 +1485,8 @@
   #define GRID_MAX_POINTS_X 10      // Don't use more than 15 points per axis, implementation limited.
   #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
 
+  //#define UBL_HILBERT_CURVE       // Use Hilbert distribution for less travel when probing multiple points
+
   #define UBL_MESH_EDIT_MOVES_Z     // Sophisticated users prefer no movement of nozzle
   #define UBL_SAVE_ACTIVE_ON_M500   // Save the currently active mesh in the current slot on M500
 

config/examples/Copymaster3D/400/Configuration.h

@@ -1484,6 +1484,8 @@
   #define GRID_MAX_POINTS_X 10      // Don't use more than 15 points per axis, implementation limited.
   #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
 
+  //#define UBL_HILBERT_CURVE       // Use Hilbert distribution for less travel when probing multiple points
+
   #define UBL_MESH_EDIT_MOVES_Z     // Sophisticated users prefer no movement of nozzle
   #define UBL_SAVE_ACTIVE_ON_M500   // Save the currently active mesh in the current slot on M500
 

config/examples/Copymaster3D/500/Configuration.h

@@ -1485,6 +1485,8 @@
   #define GRID_MAX_POINTS_X 10      // Don't use more than 15 points per axis, implementation limited.
   #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
 
+  //#define UBL_HILBERT_CURVE       // Use Hilbert distribution for less travel when probing multiple points
+
   #define UBL_MESH_EDIT_MOVES_Z     // Sophisticated users prefer no movement of nozzle
   #define UBL_SAVE_ACTIVE_ON_M500   // Save the currently active mesh in the current slot on M500
 

config/examples/Creality/CR-10 Mini/CrealityV1/Configuration.h

@@ -1493,6 +1493,8 @@
   #define GRID_MAX_POINTS_X 10      // Don't use more than 15 points per axis, implementation limited.
   #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
 
+  //#define UBL_HILBERT_CURVE       // Use Hilbert distribution for less travel when probing multiple points
+
   #define UBL_MESH_EDIT_MOVES_Z     // Sophisticated users prefer no movement of nozzle
   #define UBL_SAVE_ACTIVE_ON_M500   // Save the currently active mesh in the current slot on M500
 

config/examples/Creality/CR-10 Mini/MEEB-3DP/Configuration.h

@@ -1484,6 +1484,8 @@
   #define GRID_MAX_POINTS_X 10      // Don't use more than 15 points per axis, implementation limited.
   #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
 
+  //#define UBL_HILBERT_CURVE       // Use Hilbert distribution for less travel when probing multiple points
+
   #define UBL_MESH_EDIT_MOVES_Z     // Sophisticated users prefer no movement of nozzle
   #define UBL_SAVE_ACTIVE_ON_M500   // Save the currently active mesh in the current slot on M500
 

config/examples/Creality/CR-10 S4/CrealityV1/Configuration.h

@@ -1487,6 +1487,8 @@
   #define GRID_MAX_POINTS_X 10      // Don't use more than 15 points per axis, implementation limited.
   #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
 
+  //#define UBL_HILBERT_CURVE       // Use Hilbert distribution for less travel when probing multiple points
+
   #define UBL_MESH_EDIT_MOVES_Z     // Sophisticated users prefer no movement of nozzle
   #define UBL_SAVE_ACTIVE_ON_M500   // Save the currently active mesh in the current slot on M500
 

config/examples/Creality/CR-10 S5/CrealityV1/Configuration.h

@@ -1487,6 +1487,8 @@
   #define GRID_MAX_POINTS_X 10      // Don't use more than 15 points per axis, implementation limited.
   #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
 
+  //#define UBL_HILBERT_CURVE       // Use Hilbert distribution for less travel when probing multiple points
+
   #define UBL_MESH_EDIT_MOVES_Z     // Sophisticated users prefer no movement of nozzle
   #define UBL_SAVE_ACTIVE_ON_M500   // Save the currently active mesh in the current slot on M500
 

config/examples/Creality/CR-10 V2/Configuration.h

@@ -1508,6 +1508,8 @@
   #define GRID_MAX_POINTS_X 10      // Don't use more than 15 points per axis, implementation limited.
   #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
 
+  //#define UBL_HILBERT_CURVE       // Use Hilbert distribution for less travel when probing multiple points
+
   #define UBL_MESH_EDIT_MOVES_Z     // Sophisticated users prefer no movement of nozzle
   #define UBL_SAVE_ACTIVE_ON_M500   // Save the currently active mesh in the current slot on M500
 

config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 2.0/Configuration.h

@@ -1483,6 +1483,8 @@
   #define GRID_MAX_POINTS_X 10      // Don't use more than 15 points per axis, implementation limited.
   #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
 
+  //#define UBL_HILBERT_CURVE       // Use Hilbert distribution for less travel when probing multiple points
+
   #define UBL_MESH_EDIT_MOVES_Z     // Sophisticated users prefer no movement of nozzle
   #define UBL_SAVE_ACTIVE_ON_M500   // Save the currently active mesh in the current slot on M500
 

config/examples/Creality/CR-10/CrealityV1/Configuration.h

@@ -1484,6 +1484,8 @@
   #define GRID_MAX_POINTS_X 10      // Don't use more than 15 points per axis, implementation limited.
   #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
 
+  //#define UBL_HILBERT_CURVE       // Use Hilbert distribution for less travel when probing multiple points
+
   #define UBL_MESH_EDIT_MOVES_Z     // Sophisticated users prefer no movement of nozzle
   #define UBL_SAVE_ACTIVE_ON_M500   // Save the currently active mesh in the current slot on M500
 

config/examples/Creality/CR-10S/BigTreeTech SKR 1.4 Turbo TMC2209/Configuration.h

@@ -1484,6 +1484,8 @@
   #define GRID_MAX_POINTS_X 10      // Don't use more than 15 points per axis, implementation limited.
   #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
 
+  //#define UBL_HILBERT_CURVE       // Use Hilbert distribution for less travel when probing multiple points
+
   #define UBL_MESH_EDIT_MOVES_Z     // Sophisticated users prefer no movement of nozzle
   #define UBL_SAVE_ACTIVE_ON_M500   // Save the currently active mesh in the current slot on M500
 

config/examples/Creality/CR-10S/BigTreeTech SKR Mini E3 2.0/Configuration.h

@@ -1485,6 +1485,8 @@
   #define GRID_MAX_POINTS_X 10      // Don't use more than 15 points per axis, implementation limited.
   #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
 
+  //#define UBL_HILBERT_CURVE       // Use Hilbert distribution for less travel when probing multiple points
+
   #define UBL_MESH_EDIT_MOVES_Z     // Sophisticated users prefer no movement of nozzle
   #define UBL_SAVE_ACTIVE_ON_M500   // Save the currently active mesh in the current slot on M500
 

config/examples/Creality/CR-10S/CrealityV1/Configuration.h

@@ -1485,6 +1485,8 @@
   #define GRID_MAX_POINTS_X 10      // Don't use more than 15 points per axis, implementation limited.
   #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
 
+  //#define UBL_HILBERT_CURVE       // Use Hilbert distribution for less travel when probing multiple points
+
   #define UBL_MESH_EDIT_MOVES_Z     // Sophisticated users prefer no movement of nozzle
   #define UBL_SAVE_ACTIVE_ON_M500   // Save the currently active mesh in the current slot on M500
 

config/examples/Creality/CR-20 Pro/Configuration.h

@@ -1487,6 +1487,8 @@
   #define GRID_MAX_POINTS_X 10      // Don't use more than 15 points per axis, implementation limited.
   #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
 
+  //#define UBL_HILBERT_CURVE       // Use Hilbert distribution for less travel when probing multiple points
+
   #define UBL_MESH_EDIT_MOVES_Z     // Sophisticated users prefer no movement of nozzle
   #define UBL_SAVE_ACTIVE_ON_M500   // Save the currently active mesh in the current slot on M500
 

config/examples/Creality/CR-20/Configuration.h

@@ -1487,6 +1487,8 @@
   #define GRID_MAX_POINTS_X 10      // Don't use more than 15 points per axis, implementation limited.
   #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
 
+  //#define UBL_HILBERT_CURVE       // Use Hilbert distribution for less travel when probing multiple points
+
   #define UBL_MESH_EDIT_MOVES_Z     // Sophisticated users prefer no movement of nozzle
   #define UBL_SAVE_ACTIVE_ON_M500   // Save the currently active mesh in the current slot on M500
 

config/examples/Creality/CR-6 SE/Configuration.h

@@ -1484,6 +1484,8 @@
   #define GRID_MAX_POINTS_X 10      // Don't use more than 15 points per axis, implementation limited.
   #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
 
+  //#define UBL_HILBERT_CURVE       // Use Hilbert distribution for less travel when probing multiple points
+
   #define UBL_MESH_EDIT_MOVES_Z     // Sophisticated users prefer no movement of nozzle
   #define UBL_SAVE_ACTIVE_ON_M500   // Save the currently active mesh in the current slot on M500
 

config/examples/Creality/CR-8/Configuration.h

@@ -1484,6 +1484,8 @@
   #define GRID_MAX_POINTS_X 10      // Don't use more than 15 points per axis, implementation limited.
   #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
 
+  //#define UBL_HILBERT_CURVE       // Use Hilbert distribution for less travel when probing multiple points
+
   #define UBL_MESH_EDIT_MOVES_Z     // Sophisticated users prefer no movement of nozzle
   #define UBL_SAVE_ACTIVE_ON_M500   // Save the currently active mesh in the current slot on M500
 

config/examples/Creality/Ender-2/Configuration.h

@@ -1485,6 +1485,8 @@
   #define GRID_MAX_POINTS_X 10      // Don't use more than 15 points per axis, implementation limited.
   #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
 
+  //#define UBL_HILBERT_CURVE       // Use Hilbert distribution for less travel when probing multiple points
+
   #define UBL_MESH_EDIT_MOVES_Z     // Sophisticated users prefer no movement of nozzle
   #define UBL_SAVE_ACTIVE_ON_M500   // Save the currently active mesh in the current slot on M500
 

config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.0/Configuration.h

@@ -1484,6 +1484,8 @@
   #define GRID_MAX_POINTS_X 10      // Don't use more than 15 points per axis, implementation limited.
   #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
 
+  //#define UBL_HILBERT_CURVE       // Use Hilbert distribution for less travel when probing multiple points
+
   #define UBL_MESH_EDIT_MOVES_Z     // Sophisticated users prefer no movement of nozzle
   #define UBL_SAVE_ACTIVE_ON_M500   // Save the currently active mesh in the current slot on M500
 

config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.2/Configuration.h

@@ -1484,6 +1484,8 @@
   #define GRID_MAX_POINTS_X 10      // Don't use more than 15 points per axis, implementation limited.
   #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
 
+  //#define UBL_HILBERT_CURVE       // Use Hilbert distribution for less travel when probing multiple points
+
   #define UBL_MESH_EDIT_MOVES_Z     // Sophisticated users prefer no movement of nozzle
   #define UBL_SAVE_ACTIVE_ON_M500   // Save the currently active mesh in the current slot on M500
 

config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 2.0/Configuration.h

@@ -1484,6 +1484,8 @@
   #define GRID_MAX_POINTS_X 10      // Don't use more than 15 points per axis, implementation limited.
   #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
 
+  //#define UBL_HILBERT_CURVE       // Use Hilbert distribution for less travel when probing multiple points
+
   #define UBL_MESH_EDIT_MOVES_Z     // Sophisticated users prefer no movement of nozzle
   #define UBL_SAVE_ACTIVE_ON_M500   // Save the currently active mesh in the current slot on M500
 

config/examples/Creality/Ender-3 Pro/CrealityV1/Configuration.h

@@ -1485,6 +1485,8 @@
   #define GRID_MAX_POINTS_X 10      // Don't use more than 15 points per axis, implementation limited.
   #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
 
+  //#define UBL_HILBERT_CURVE       // Use Hilbert distribution for less travel when probing multiple points
+
   #define UBL_MESH_EDIT_MOVES_Z     // Sophisticated users prefer no movement of nozzle
   #define UBL_SAVE_ACTIVE_ON_M500   // Save the currently active mesh in the current slot on M500
 

config/examples/Creality/Ender-3 Pro/CrealityV422/Configuration.h

@@ -1488,6 +1488,8 @@
   #define GRID_MAX_POINTS_X 10      // Don't use more than 15 points per axis, implementation limited.
   #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
 
+  //#define UBL_HILBERT_CURVE       // Use Hilbert distribution for less travel when probing multiple points
+
   #define UBL_MESH_EDIT_MOVES_Z     // Sophisticated users prefer no movement of nozzle
   #define UBL_SAVE_ACTIVE_ON_M500   // Save the currently active mesh in the current slot on M500
 

config/examples/Creality/Ender-3 Pro/CrealityV427/Configuration.h

@@ -1485,6 +1485,8 @@
   #define GRID_MAX_POINTS_X 10      // Don't use more than 15 points per axis, implementation limited.
   #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
 
+  //#define UBL_HILBERT_CURVE       // Use Hilbert distribution for less travel when probing multiple points
+
   #define UBL_MESH_EDIT_MOVES_Z     // Sophisticated users prefer no movement of nozzle
   #define UBL_SAVE_ACTIVE_ON_M500   // Save the currently active mesh in the current slot on M500
 

config/examples/Creality/Ender-3 V2/Configuration.h

@@ -1484,6 +1484,8 @@
   #define GRID_MAX_POINTS_X 10      // Don't use more than 15 points per axis, implementation limited.
   #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
 
+  //#define UBL_HILBERT_CURVE       // Use Hilbert distribution for less travel when probing multiple points
+
   #define UBL_MESH_EDIT_MOVES_Z     // Sophisticated users prefer no movement of nozzle
   #define UBL_SAVE_ACTIVE_ON_M500   // Save the currently active mesh in the current slot on M500
 

config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/2-into-1 Hotend/Configuration.h

@@ -1483,6 +1483,8 @@
   #define GRID_MAX_POINTS_X 10      // Don't use more than 15 points per axis, implementation limited.
   #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
 
+  //#define UBL_HILBERT_CURVE       // Use Hilbert distribution for less travel when probing multiple points
+
   #define UBL_MESH_EDIT_MOVES_Z     // Sophisticated users prefer no movement of nozzle
   #define UBL_SAVE_ACTIVE_ON_M500   // Save the currently active mesh in the current slot on M500
 

config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Dual Z/Configuration.h

@@ -1483,6 +1483,8 @@
   #define GRID_MAX_POINTS_X 10      // Don't use more than 15 points per axis, implementation limited.
   #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
 
+  //#define UBL_HILBERT_CURVE       // Use Hilbert distribution for less travel when probing multiple points
+
   #define UBL_MESH_EDIT_MOVES_Z     // Sophisticated users prefer no movement of nozzle
   #define UBL_SAVE_ACTIVE_ON_M500   // Save the currently active mesh in the current slot on M500
 

config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Single Extruder/Configuration.h

@@ -1483,6 +1483,8 @@
   #define GRID_MAX_POINTS_X 10      // Don't use more than 15 points per axis, implementation limited.
   #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
 
+  //#define UBL_HILBERT_CURVE       // Use Hilbert distribution for less travel when probing multiple points
+
   #define UBL_MESH_EDIT_MOVES_Z     // Sophisticated users prefer no movement of nozzle
   #define UBL_SAVE_ACTIVE_ON_M500   // Save the currently active mesh in the current slot on M500
 

config/examples/Creality/Ender-3/BigTreeTech SKR E3-DIP V1.1/Configuration.h

@@ -1484,6 +1484,8 @@
   #define GRID_MAX_POINTS_X 10      // Don't use more than 15 points per axis, implementation limited.
   #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
 
+  //#define UBL_HILBERT_CURVE       // Use Hilbert distribution for less travel when probing multiple points
+
   #define UBL_MESH_EDIT_MOVES_Z     // Sophisticated users prefer no movement of nozzle
   #define UBL_SAVE_ACTIVE_ON_M500   // Save the currently active mesh in the current slot on M500
 

config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.0/Configuration.h

@@ -1483,6 +1483,8 @@
   #define GRID_MAX_POINTS_X 10      // Don't use more than 15 points per axis, implementation limited.
   #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
 
+  //#define UBL_HILBERT_CURVE       // Use Hilbert distribution for less travel when probing multiple points
+
   #define UBL_MESH_EDIT_MOVES_Z     // Sophisticated users prefer no movement of nozzle
   #define UBL_SAVE_ACTIVE_ON_M500   // Save the currently active mesh in the current slot on M500
 

config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.2/Configuration.h

@@ -1483,6 +1483,8 @@
   #define GRID_MAX_POINTS_X 10      // Don't use more than 15 points per axis, implementation limited.
   #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
 
+  //#define UBL_HILBERT_CURVE       // Use Hilbert distribution for less travel when probing multiple points
+
   #define UBL_MESH_EDIT_MOVES_Z     // Sophisticated users prefer no movement of nozzle
   #define UBL_SAVE_ACTIVE_ON_M500   // Save the currently active mesh in the current slot on M500
 

config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 2.0/Configuration.h

@@ -1483,6 +1483,8 @@
   #define GRID_MAX_POINTS_X 10      // Don't use more than 15 points per axis, implementation limited.
   #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
 
+  //#define UBL_HILBERT_CURVE       // Use Hilbert distribution for less travel when probing multiple points
+
   #define UBL_MESH_EDIT_MOVES_Z     // Sophisticated users prefer no movement of nozzle
   #define UBL_SAVE_ACTIVE_ON_M500   // Save the currently active mesh in the current slot on M500
 

config/examples/Creality/Ender-3/CrealityV1/Configuration.h

@@ -1485,6 +1485,8 @@
   #define GRID_MAX_POINTS_X 10      // Don't use more than 15 points per axis, implementation limited.
   #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
 
+  //#define UBL_HILBERT_CURVE       // Use Hilbert distribution for less travel when probing multiple points
+
   #define UBL_MESH_EDIT_MOVES_Z     // Sophisticated users prefer no movement of nozzle
   #define UBL_SAVE_ACTIVE_ON_M500   // Save the currently active mesh in the current slot on M500
 

config/examples/Creality/Ender-3/CrealityV422/Configuration.h

@@ -1455,6 +1455,8 @@
   #define GRID_MAX_POINTS_X 10      // Don't use more than 15 points per axis, implementation limited.
   #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
 
+  //#define UBL_HILBERT_CURVE       // Use Hilbert distribution for less travel when probing multiple points
+
   #define UBL_MESH_EDIT_MOVES_Z     // Sophisticated users prefer no movement of nozzle
   #define UBL_SAVE_ACTIVE_ON_M500   // Save the currently active mesh in the current slot on M500
 

config/examples/Creality/Ender-3/CrealityV427/Configuration.h

@@ -1491,6 +1491,8 @@
   #define GRID_MAX_POINTS_X 10      // Don't use more than 15 points per axis, implementation limited.
   #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
 
+  //#define UBL_HILBERT_CURVE       // Use Hilbert distribution for less travel when probing multiple points
+
   #define UBL_MESH_EDIT_MOVES_Z     // Sophisticated users prefer no movement of nozzle
   #define UBL_SAVE_ACTIVE_ON_M500   // Save the currently active mesh in the current slot on M500
 

config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/BLTouch/Configuration.h

@@ -1485,6 +1485,8 @@
   #define GRID_MAX_POINTS_X 10      // Don't use more than 15 points per axis, implementation limited.
   #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
 
+  //#define UBL_HILBERT_CURVE       // Use Hilbert distribution for less travel when probing multiple points
+
   #define UBL_MESH_EDIT_MOVES_Z     // Sophisticated users prefer no movement of nozzle
   #define UBL_SAVE_ACTIVE_ON_M500   // Save the currently active mesh in the current slot on M500
 

config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/base/Configuration.h

@@ -1485,6 +1485,8 @@
   #define GRID_MAX_POINTS_X 10      // Don't use more than 15 points per axis, implementation limited.
   #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
 
+  //#define UBL_HILBERT_CURVE       // Use Hilbert distribution for less travel when probing multiple points
+
   #define UBL_MESH_EDIT_MOVES_Z     // Sophisticated users prefer no movement of nozzle
   #define UBL_SAVE_ACTIVE_ON_M500   // Save the currently active mesh in the current slot on M500
 

config/examples/Creality/Ender-3/FYSETC Cheetah/BLTouch/Configuration.h

@@ -1485,6 +1485,8 @@
   #define GRID_MAX_POINTS_X 10      // Don't use more than 15 points per axis, implementation limited.
   #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
 
+  //#define UBL_HILBERT_CURVE       // Use Hilbert distribution for less travel when probing multiple points
+
   #define UBL_MESH_EDIT_MOVES_Z     // Sophisticated users prefer no movement of nozzle
   #define UBL_SAVE_ACTIVE_ON_M500   // Save the currently active mesh in the current slot on M500
 

config/examples/Creality/Ender-3/FYSETC Cheetah/base/Configuration.h

@@ -1485,6 +1485,8 @@
   #define GRID_MAX_POINTS_X 10      // Don't use more than 15 points per axis, implementation limited.
   #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
 
+  //#define UBL_HILBERT_CURVE       // Use Hilbert distribution for less travel when probing multiple points
+
   #define UBL_MESH_EDIT_MOVES_Z     // Sophisticated users prefer no movement of nozzle
   #define UBL_SAVE_ACTIVE_ON_M500   // Save the currently active mesh in the current slot on M500
 

config/examples/Creality/Ender-3/MEEB-3DP/Configuration.h

@@ -1490,6 +1490,8 @@
   #define GRID_MAX_POINTS_X 10      // Don't use more than 15 points per axis, implementation limited.
   #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
 
+  //#define UBL_HILBERT_CURVE       // Use Hilbert distribution for less travel when probing multiple points
+
   #define UBL_MESH_EDIT_MOVES_Z     // Sophisticated users prefer no movement of nozzle
   #define UBL_SAVE_ACTIVE_ON_M500   // Save the currently active mesh in the current slot on M500
 

config/examples/Creality/Ender-3/MKS Robin E3 1.0/Configuration.h

@@ -1483,6 +1483,8 @@
   #define GRID_MAX_POINTS_X 10      // Don't use more than 15 points per axis, implementation limited.
   #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
 
+  //#define UBL_HILBERT_CURVE       // Use Hilbert distribution for less travel when probing multiple points
+
   #define UBL_MESH_EDIT_MOVES_Z     // Sophisticated users prefer no movement of nozzle
   #define UBL_SAVE_ACTIVE_ON_M500   // Save the currently active mesh in the current slot on M500
 

config/examples/Creality/Ender-3/MKS Robin E3P/Configuration.h

@@ -1485,6 +1485,8 @@
   #define GRID_MAX_POINTS_X 10      // Don't use more than 15 points per axis, implementation limited.
   #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
 
+  //#define UBL_HILBERT_CURVE       // Use Hilbert distribution for less travel when probing multiple points
+
   #define UBL_MESH_EDIT_MOVES_Z     // Sophisticated users prefer no movement of nozzle
   #define UBL_SAVE_ACTIVE_ON_M500   // Save the currently active mesh in the current slot on M500
 

config/examples/Creality/Ender-4/Configuration.h

@@ -1484,6 +1484,8 @@
   #define GRID_MAX_POINTS_X 10      // Don't use more than 15 points per axis, implementation limited.
   #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
 
+  //#define UBL_HILBERT_CURVE       // Use Hilbert distribution for less travel when probing multiple points
+
   #define UBL_MESH_EDIT_MOVES_Z     // Sophisticated users prefer no movement of nozzle
   #define UBL_SAVE_ACTIVE_ON_M500   // Save the currently active mesh in the current slot on M500
 

config/examples/Creality/Ender-5 Plus/Configuration.h

@@ -1493,6 +1493,8 @@
   #define GRID_MAX_POINTS_X 7       // Don't use more than 15 points per axis, implementation limited.
   #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
 
+  //#define UBL_HILBERT_CURVE       // Use Hilbert distribution for less travel when probing multiple points
+
   //#define UBL_MESH_EDIT_MOVES_Z   // Sophisticated users prefer no movement of nozzle
   #define UBL_SAVE_ACTIVE_ON_M500   // Save the currently active mesh in the current slot on M500
 

config/examples/Creality/Ender-5 Pro/BigTreeTech SKR E3 Turbo with BLTouch/Configuration.h

@@ -1485,6 +1485,8 @@
   #define GRID_MAX_POINTS_X 10      // Don't use more than 15 points per axis, implementation limited.
   #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
 
+  //#define UBL_HILBERT_CURVE       // Use Hilbert distribution for less travel when probing multiple points
+
   #define UBL_MESH_EDIT_MOVES_Z     // Sophisticated users prefer no movement of nozzle
   #define UBL_SAVE_ACTIVE_ON_M500   // Save the currently active mesh in the current slot on M500
 

config/examples/Creality/Ender-5 Pro/BigTreeTech SKR E3 Turbo/Configuration.h

@@ -1485,6 +1485,8 @@
   #define GRID_MAX_POINTS_X 10      // Don't use more than 15 points per axis, implementation limited.
   #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
 
+  //#define UBL_HILBERT_CURVE       // Use Hilbert distribution for less travel when probing multiple points
+
   #define UBL_MESH_EDIT_MOVES_Z     // Sophisticated users prefer no movement of nozzle
   #define UBL_SAVE_ACTIVE_ON_M500   // Save the currently active mesh in the current slot on M500
 

config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 1.2/Configuration.h

@@ -1480,6 +1480,8 @@
   #define GRID_MAX_POINTS_X 10      // Don't use more than 15 points per axis, implementation limited.
   #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
 
+  //#define UBL_HILBERT_CURVE       // Use Hilbert distribution for less travel when probing multiple points
+
   #define UBL_MESH_EDIT_MOVES_Z     // Sophisticated users prefer no movement of nozzle
   #define UBL_SAVE_ACTIVE_ON_M500   // Save the currently active mesh in the current slot on M500
 

config/examples/Creality/Ender-5 Pro/CrealityV1/Configuration.h

@@ -1485,6 +1485,8 @@
   #define GRID_MAX_POINTS_X 10      // Don't use more than 15 points per axis, implementation limited.
   #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
 
+  //#define UBL_HILBERT_CURVE       // Use Hilbert distribution for less travel when probing multiple points
+
   #define UBL_MESH_EDIT_MOVES_Z     // Sophisticated users prefer no movement of nozzle
   #define UBL_SAVE_ACTIVE_ON_M500   // Save the currently active mesh in the current slot on M500
 

config/examples/Creality/Ender-5 Pro/CrealityV422/Configuration.h

@@ -1485,6 +1485,8 @@
   #define GRID_MAX_POINTS_X 10      // Don't use more than 15 points per axis, implementation limited.
   #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
 
+  //#define UBL_HILBERT_CURVE       // Use Hilbert distribution for less travel when probing multiple points
+
   #define UBL_MESH_EDIT_MOVES_Z     // Sophisticated users prefer no movement of nozzle
   #define UBL_SAVE_ACTIVE_ON_M500   // Save the currently active mesh in the current slot on M500
 

config/examples/Creality/Ender-5 Pro/CrealityV427/Configuration.h

@@ -1485,6 +1485,8 @@
   #define GRID_MAX_POINTS_X 10      // Don't use more than 15 points per axis, implementation limited.
   #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
 
+  //#define UBL_HILBERT_CURVE       // Use Hilbert distribution for less travel when probing multiple points
+
   #define UBL_MESH_EDIT_MOVES_Z     // Sophisticated users prefer no movement of nozzle
   #define UBL_SAVE_ACTIVE_ON_M500   // Save the currently active mesh in the current slot on M500
 

config/examples/Creality/Ender-5/BigTreeTech SKR 1.4 Turbo (TMC2209)/Configuration.h

@@ -1514,6 +1514,8 @@
   #define GRID_MAX_POINTS_X 10      // Don't use more than 15 points per axis, implementation limited.
   #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
 
+  //#define UBL_HILBERT_CURVE       // Use Hilbert distribution for less travel when probing multiple points
+
   #define UBL_MESH_EDIT_MOVES_Z     // Sophisticated users prefer no movement of nozzle
   #define UBL_SAVE_ACTIVE_ON_M500   // Save the currently active mesh in the current slot on M500
 

config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo with BLTouch/Configuration.h

@@ -1485,6 +1485,8 @@
   #define GRID_MAX_POINTS_X 10      // Don't use more than 15 points per axis, implementation limited.
   #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
 
+  //#define UBL_HILBERT_CURVE       // Use Hilbert distribution for less travel when probing multiple points
+
   #define UBL_MESH_EDIT_MOVES_Z     // Sophisticated users prefer no movement of nozzle
   #define UBL_SAVE_ACTIVE_ON_M500   // Save the currently active mesh in the current slot on M500
 

config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo/Configuration.h

@@ -1485,6 +1485,8 @@
   #define GRID_MAX_POINTS_X 10      // Don't use more than 15 points per axis, implementation limited.
   #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
 
+  //#define UBL_HILBERT_CURVE       // Use Hilbert distribution for less travel when probing multiple points
+
   #define UBL_MESH_EDIT_MOVES_Z     // Sophisticated users prefer no movement of nozzle
   #define UBL_SAVE_ACTIVE_ON_M500   // Save the currently active mesh in the current slot on M500
 

config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 1.2/Configuration.h

@@ -1483,6 +1483,8 @@
   #define GRID_MAX_POINTS_X 10      // Don't use more than 15 points per axis, implementation limited.
   #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
 
+  //#define UBL_HILBERT_CURVE       // Use Hilbert distribution for less travel when probing multiple points
+
   #define UBL_MESH_EDIT_MOVES_Z     // Sophisticated users prefer no movement of nozzle
   #define UBL_SAVE_ACTIVE_ON_M500   // Save the currently active mesh in the current slot on M500
 

config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 2.0/Configuration.h

@@ -1483,6 +1483,8 @@
   #define GRID_MAX_POINTS_X 10      // Don't use more than 15 points per axis, implementation limited.
   #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
 
+  //#define UBL_HILBERT_CURVE       // Use Hilbert distribution for less travel when probing multiple points
+
   #define UBL_MESH_EDIT_MOVES_Z     // Sophisticated users prefer no movement of nozzle
   #define UBL_SAVE_ACTIVE_ON_M500   // Save the currently active mesh in the current slot on M500
 

config/examples/Creality/Ender-5/CrealityV1/Configuration.h

@@ -1485,6 +1485,8 @@
   #define GRID_MAX_POINTS_X 10      // Don't use more than 15 points per axis, implementation limited.
   #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
 
+  //#define UBL_HILBERT_CURVE       // Use Hilbert distribution for less travel when probing multiple points
+
   #define UBL_MESH_EDIT_MOVES_Z     // Sophisticated users prefer no movement of nozzle
   #define UBL_SAVE_ACTIVE_ON_M500   // Save the currently active mesh in the current slot on M500