3D-printing/Configurations
1
0
Fork 0
mirror of https://github.com/MarlinFirmware/Configurations.git synced 2025-07-18 04:08:05 -06:00
Code Issues Projects Releases Packages Wiki Activity Actions

📝 Update some comments

Browse source 
Co-Authored-By: Andrew <18502096+classicrocker883@users.noreply.github.com>
This commit is contained in:
Scott Lahteine 2025-03-17 16:11:24 -05:00
parent 1938f12e3b
commit 0b0a097917
760 changed files with 23176 additions and 18994 deletions
Download patch file Download diff file Expand all files Collapse all files

52
config/examples/Geeetech/A20M/Configuration.h
View file

@ -2912,13 +2912,15 @@
//
//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602
//
// ANET and Tronxy 20x4 Controller
//
//#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin.
// This LCD is known to be susceptible to electrical interference
// which scrambles the display. Pressing any button clears it up.
// This is a LCD2004 display with 5 analog buttons.
/**
* ANET and Tronxy 20x4 Controller
* LCD2004 display with 5 analog buttons.
*
* NOTE: Requires ADC_KEYPAD_PIN to be assigned to an analog pin.
* This LCD is known to be susceptible to electrical interference which
* scrambles the display. Press any button to clear it up.
*/
//#define ZONESTAR_LCD
//
// Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD.
@ -3567,22 +3569,26 @@
// :[1,2,3,4,5,6,7,8]
//#define NUM_M106_FANS 1
// Use software PWM to drive the fan, as for the heaters. This uses a very low frequency
// which is not as annoying as with the hardware PWM. On the other hand, if this frequency
// is too low, you should also increment SOFT_PWM_SCALE.
/**
* Use software PWM to drive the fan, as for the heaters. This uses a very low frequency
* which is not as annoying as with the hardware PWM. On the other hand, if this frequency
* is too low, you should also increment SOFT_PWM_SCALE.
*/
#define FAN_SOFT_PWM
// Incrementing this by 1 will double the software PWM frequency,
// affecting heaters, and the fan if FAN_SOFT_PWM is enabled.
// However, control resolution will be halved for each increment;
// at zero value, there are 128 effective control positions.
// :[0,1,2,3,4,5,6,7]
/**
* Incrementing this by 1 will double the software PWM frequency, affecting heaters, and
* the fan if FAN_SOFT_PWM is enabled. However, control resolution will be halved for each
* increment; at zero value, there are 128 effective control positions.
* :[0,1,2,3,4,5,6,7]
*/
#define SOFT_PWM_SCALE 0
// If SOFT_PWM_SCALE is set to a value higher than 0, dithering can
// be used to mitigate the associated resolution loss. If enabled,
// some of the PWM cycles are stretched so on average the desired
// duty cycle is attained.
/**
* If SOFT_PWM_SCALE is set to a value higher than 0, dithering can be used to mitigate the
* associated resolution loss. If enabled, some of the PWM cycles are stretched so on average
* the desired duty cycle is attained.
*/
//#define SOFT_PWM_DITHER
// @section extras
@ -3592,9 +3598,11 @@
// @section lights
// Temperature status LEDs that display the hotend and bed temperature.
// If all hotends, bed temperature, and target temperature are under 54C
// then the BLUE led is on. Otherwise the RED led is on. (1C hysteresis)
/**
* Temperature status LEDs that display the hotend and bed temperature.
* If all hotends, bed temperature, and target temperature are under 54C
* the BLUE led is on. Otherwise the RED led is on. (1C hysteresis)
*/
//#define TEMP_STAT_LEDS
// Support for BlinkM/CyzRgb