mirror of
https://github.com/MarlinFirmware/Configurations.git
synced 2025-08-08 22:35:18 -06:00
Scott Lahteine
parent
fc3ee8d563
commit
07ec999210
513 changed files with 59477 additions and 1567 deletions
|
|
@ -35,7 +35,7 @@
|
|||
*
|
||||
* Advanced settings can be found in Configuration_adv.h
|
||||
*/
|
||||
#define CONFIGURATION_H_VERSION 02000801
|
||||
#define CONFIGURATION_H_VERSION 02000900
|
||||
|
||||
//===========================================================================
|
||||
//============================= Getting Started =============================
|
||||
|
|
@ -187,6 +187,45 @@
|
|||
// Choose your own or use a service like https://www.uuidgenerator.net/version4
|
||||
//#define MACHINE_UUID "00000000-0000-0000-0000-000000000000"
|
||||
|
||||
/**
|
||||
* Define the number of coordinated linear axes.
|
||||
* See https://github.com/DerAndere1/Marlin/wiki
|
||||
* Each linear axis gets its own stepper control and endstop:
|
||||
*
|
||||
* Steppers: *_STEP_PIN, *_ENABLE_PIN, *_DIR_PIN, *_ENABLE_ON
|
||||
* Endstops: *_STOP_PIN, USE_*MIN_PLUG, USE_*MAX_PLUG
|
||||
* Axes: *_MIN_POS, *_MAX_POS, INVERT_*_DIR
|
||||
* Planner: DEFAULT_AXIS_STEPS_PER_UNIT, DEFAULT_MAX_FEEDRATE
|
||||
* DEFAULT_MAX_ACCELERATION, AXIS_RELATIVE_MODES,
|
||||
* MICROSTEP_MODES, MANUAL_FEEDRATE
|
||||
*
|
||||
* :[3, 4, 5, 6]
|
||||
*/
|
||||
//#define LINEAR_AXES 3
|
||||
|
||||
/**
|
||||
* Axis codes for additional axes:
|
||||
* This defines the axis code that is used in G-code commands to
|
||||
* reference a specific axis.
|
||||
* 'A' for rotational axis parallel to X
|
||||
* 'B' for rotational axis parallel to Y
|
||||
* 'C' for rotational axis parallel to Z
|
||||
* 'U' for secondary linear axis parallel to X
|
||||
* 'V' for secondary linear axis parallel to Y
|
||||
* 'W' for secondary linear axis parallel to Z
|
||||
* Regardless of the settings, firmware-internal axis IDs are
|
||||
* I (AXIS4), J (AXIS5), K (AXIS6).
|
||||
*/
|
||||
#if LINEAR_AXES >= 4
|
||||
#define AXIS4_NAME 'A' // :['A', 'B', 'C', 'U', 'V', 'W']
|
||||
#endif
|
||||
#if LINEAR_AXES >= 5
|
||||
#define AXIS5_NAME 'B' // :['A', 'B', 'C', 'U', 'V', 'W']
|
||||
#endif
|
||||
#if LINEAR_AXES >= 6
|
||||
#define AXIS6_NAME 'C' // :['A', 'B', 'C', 'U', 'V', 'W']
|
||||
#endif
|
||||
|
||||
// @section extruder
|
||||
|
||||
// This defines the number of extruders
|
||||
|
|
@ -747,9 +786,15 @@
|
|||
#define USE_XMIN_PLUG
|
||||
#define USE_YMIN_PLUG
|
||||
#define USE_ZMIN_PLUG
|
||||
//#define USE_IMIN_PLUG
|
||||
//#define USE_JMIN_PLUG
|
||||
//#define USE_KMIN_PLUG
|
||||
//#define USE_XMAX_PLUG
|
||||
//#define USE_YMAX_PLUG
|
||||
//#define USE_ZMAX_PLUG
|
||||
//#define USE_IMAX_PLUG
|
||||
//#define USE_JMAX_PLUG
|
||||
//#define USE_KMAX_PLUG
|
||||
|
||||
// Enable pullup for all endstops to prevent a floating state
|
||||
//#define ENDSTOPPULLUPS
|
||||
|
|
@ -758,9 +803,15 @@
|
|||
//#define ENDSTOPPULLUP_XMAX
|
||||
//#define ENDSTOPPULLUP_YMAX
|
||||
//#define ENDSTOPPULLUP_ZMAX
|
||||
//#define ENDSTOPPULLUP_IMAX
|
||||
//#define ENDSTOPPULLUP_JMAX
|
||||
//#define ENDSTOPPULLUP_KMAX
|
||||
//#define ENDSTOPPULLUP_XMIN
|
||||
//#define ENDSTOPPULLUP_YMIN
|
||||
//#define ENDSTOPPULLUP_ZMIN
|
||||
//#define ENDSTOPPULLUP_IMIN
|
||||
//#define ENDSTOPPULLUP_JMIN
|
||||
//#define ENDSTOPPULLUP_KMIN
|
||||
#define ENDSTOPPULLUP_ZMIN_PROBE
|
||||
#endif
|
||||
|
||||
|
|
@ -771,9 +822,15 @@
|
|||
//#define ENDSTOPPULLDOWN_XMAX
|
||||
//#define ENDSTOPPULLDOWN_YMAX
|
||||
//#define ENDSTOPPULLDOWN_ZMAX
|
||||
//#define ENDSTOPPULLDOWN_IMAX
|
||||
//#define ENDSTOPPULLDOWN_JMAX
|
||||
//#define ENDSTOPPULLDOWN_KMAX
|
||||
//#define ENDSTOPPULLDOWN_XMIN
|
||||
//#define ENDSTOPPULLDOWN_YMIN
|
||||
//#define ENDSTOPPULLDOWN_ZMIN
|
||||
//#define ENDSTOPPULLDOWN_IMIN
|
||||
//#define ENDSTOPPULLDOWN_JMIN
|
||||
//#define ENDSTOPPULLDOWN_KMIN
|
||||
//#define ENDSTOPPULLDOWN_ZMIN_PROBE
|
||||
#endif
|
||||
|
||||
|
|
@ -781,9 +838,15 @@
|
|||
#define X_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop.
|
||||
#define Y_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop.
|
||||
#define Z_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop.
|
||||
#define I_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop.
|
||||
#define J_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop.
|
||||
#define K_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop.
|
||||
#define X_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop.
|
||||
#define Y_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop.
|
||||
#define Z_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop.
|
||||
#define I_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop.
|
||||
#define J_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop.
|
||||
#define K_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop.
|
||||
#define Z_MIN_PROBE_ENDSTOP_INVERTING false // Set to true to invert the logic of the probe.
|
||||
|
||||
/**
|
||||
|
|
@ -812,6 +875,9 @@
|
|||
//#define Z2_DRIVER_TYPE A4988
|
||||
//#define Z3_DRIVER_TYPE A4988
|
||||
//#define Z4_DRIVER_TYPE A4988
|
||||
//#define I_DRIVER_TYPE A4988
|
||||
//#define J_DRIVER_TYPE A4988
|
||||
//#define K_DRIVER_TYPE A4988
|
||||
#define E0_DRIVER_TYPE A4988
|
||||
//#define E1_DRIVER_TYPE A4988
|
||||
//#define E2_DRIVER_TYPE A4988
|
||||
|
|
@ -865,14 +931,14 @@
|
|||
/**
|
||||
* Default Axis Steps Per Unit (steps/mm)
|
||||
* Override with M92
|
||||
* X, Y, Z, E0 [, E1[, E2...]]
|
||||
* X, Y, Z [, I [, J [, K]]], E0 [, E1[, E2...]]
|
||||
*/
|
||||
#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 98 }
|
||||
|
||||
/**
|
||||
* Default Max Feed Rate (mm/s)
|
||||
* Override with M203
|
||||
* X, Y, Z, E0 [, E1[, E2...]]
|
||||
* X, Y, Z [, I [, J [, K]]], E0 [, E1[, E2...]]
|
||||
*/
|
||||
#define DEFAULT_MAX_FEEDRATE { 200, 200, 100, 25 }
|
||||
|
||||
|
|
@ -885,7 +951,7 @@
|
|||
* Default Max Acceleration (change/s) change = mm/s
|
||||
* (Maximum start speed for accelerated moves)
|
||||
* Override with M201
|
||||
* X, Y, Z, E0 [, E1[, E2...]]
|
||||
* X, Y, Z [, I [, J [, K]]], E0 [, E1[, E2...]]
|
||||
*/
|
||||
#define DEFAULT_MAX_ACCELERATION { 200, 200, 100, 3000 }
|
||||
|
||||
|
|
@ -919,6 +985,9 @@
|
|||
#define DEFAULT_XJERK 10.0
|
||||
#define DEFAULT_YJERK 10.0
|
||||
#define DEFAULT_ZJERK 0.4
|
||||
//#define DEFAULT_IJERK 0.3
|
||||
//#define DEFAULT_JJERK 0.3
|
||||
//#define DEFAULT_KJERK 0.3
|
||||
|
||||
//#define TRAVEL_EXTRA_XYJERK 0.0 // Additional jerk allowance for all travel moves
|
||||
|
||||
|
|
@ -1233,12 +1302,18 @@
|
|||
#define Y_ENABLE_ON 0
|
||||
#define Z_ENABLE_ON 0
|
||||
#define E_ENABLE_ON 0 // For all extruders
|
||||
//#define I_ENABLE_ON 0
|
||||
//#define J_ENABLE_ON 0
|
||||
//#define K_ENABLE_ON 0
|
||||
|
||||
// Disable axis steppers immediately when they're not being stepped.
|
||||
// WARNING: When motors turn off there is a chance of losing position accuracy!
|
||||
#define DISABLE_X false
|
||||
#define DISABLE_Y false
|
||||
#define DISABLE_Z false
|
||||
//#define DISABLE_I false
|
||||
//#define DISABLE_J false
|
||||
//#define DISABLE_K false
|
||||
|
||||
// Turn off the display blinking that warns about possible accuracy reduction
|
||||
//#define DISABLE_REDUCED_ACCURACY_WARNING
|
||||
|
|
@ -1254,6 +1329,9 @@
|
|||
#define INVERT_X_DIR true
|
||||
#define INVERT_Y_DIR false
|
||||
#define INVERT_Z_DIR true
|
||||
//#define INVERT_I_DIR false
|
||||
//#define INVERT_J_DIR false
|
||||
//#define INVERT_K_DIR false
|
||||
|
||||
// @section extruder
|
||||
|
||||
|
|
@ -1289,6 +1367,9 @@
|
|||
#define X_HOME_DIR -1
|
||||
#define Y_HOME_DIR -1
|
||||
#define Z_HOME_DIR -1
|
||||
//#define I_HOME_DIR -1
|
||||
//#define J_HOME_DIR -1
|
||||
//#define K_HOME_DIR -1
|
||||
|
||||
// @section machine
|
||||
|
||||
|
|
@ -1317,6 +1398,12 @@
|
|||
#define X_MAX_POS X_BED_SIZE
|
||||
#define Y_MAX_POS Y_BED_SIZE
|
||||
#define Z_MAX_POS Z_MACHINE_MAX
|
||||
//#define I_MIN_POS 0
|
||||
//#define I_MAX_POS 50
|
||||
//#define J_MIN_POS 0
|
||||
//#define J_MAX_POS 50
|
||||
//#define K_MIN_POS 0
|
||||
//#define K_MAX_POS 50
|
||||
|
||||
/**
|
||||
* Software Endstops
|
||||
|
|
@ -1333,6 +1420,9 @@
|
|||
#define MIN_SOFTWARE_ENDSTOP_X
|
||||
#define MIN_SOFTWARE_ENDSTOP_Y
|
||||
#define MIN_SOFTWARE_ENDSTOP_Z
|
||||
#define MIN_SOFTWARE_ENDSTOP_I
|
||||
#define MIN_SOFTWARE_ENDSTOP_J
|
||||
#define MIN_SOFTWARE_ENDSTOP_K
|
||||
#endif
|
||||
|
||||
// Max software endstops constrain movement within maximum coordinate bounds
|
||||
|
|
@ -1341,6 +1431,9 @@
|
|||
#define MAX_SOFTWARE_ENDSTOP_X
|
||||
#define MAX_SOFTWARE_ENDSTOP_Y
|
||||
#define MAX_SOFTWARE_ENDSTOP_Z
|
||||
#define MAX_SOFTWARE_ENDSTOP_I
|
||||
#define MAX_SOFTWARE_ENDSTOP_J
|
||||
#define MAX_SOFTWARE_ENDSTOP_K
|
||||
#endif
|
||||
|
||||
#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS)
|
||||
|
|
|
|||
|
|
@ -30,7 +30,7 @@
|
|||
*
|
||||
* Basic settings can be found in Configuration.h
|
||||
*/
|
||||
#define CONFIGURATION_ADV_H_VERSION 02000801
|
||||
#define CONFIGURATION_ADV_H_VERSION 02000900
|
||||
|
||||
//===========================================================================
|
||||
//============================= Thermal Settings ============================
|
||||
|
|
@ -928,6 +928,9 @@
|
|||
#define INVERT_X_STEP_PIN false
|
||||
#define INVERT_Y_STEP_PIN false
|
||||
#define INVERT_Z_STEP_PIN false
|
||||
#define INVERT_I_STEP_PIN false
|
||||
#define INVERT_J_STEP_PIN false
|
||||
#define INVERT_K_STEP_PIN false
|
||||
#define INVERT_E_STEP_PIN false
|
||||
|
||||
/**
|
||||
|
|
@ -939,6 +942,9 @@
|
|||
#define DISABLE_INACTIVE_X true
|
||||
#define DISABLE_INACTIVE_Y true
|
||||
#define DISABLE_INACTIVE_Z true // Set 'false' if the nozzle could fall onto your printed part!
|
||||
#define DISABLE_INACTIVE_I true
|
||||
#define DISABLE_INACTIVE_J true
|
||||
#define DISABLE_INACTIVE_K true
|
||||
#define DISABLE_INACTIVE_E true
|
||||
|
||||
// Default Minimum Feedrates for printing and travel moves
|
||||
|
|
@ -979,7 +985,7 @@
|
|||
#if ENABLED(BACKLASH_COMPENSATION)
|
||||
// Define values for backlash distance and correction.
|
||||
// If BACKLASH_GCODE is enabled these values are the defaults.
|
||||
#define BACKLASH_DISTANCE_MM { 0, 0, 0 } // (mm)
|
||||
#define BACKLASH_DISTANCE_MM { 0, 0, 0 } // (mm) One value for each linear axis
|
||||
#define BACKLASH_CORRECTION 0.0 // 0.0 = no correction; 1.0 = full correction
|
||||
|
||||
// Add steps for motor direction changes on CORE kinematics
|
||||
|
|
@ -1050,6 +1056,13 @@
|
|||
#define CALIBRATION_MEASURE_LEFT
|
||||
#define CALIBRATION_MEASURE_BACK
|
||||
|
||||
//#define CALIBRATION_MEASURE_IMIN
|
||||
//#define CALIBRATION_MEASURE_IMAX
|
||||
//#define CALIBRATION_MEASURE_JMIN
|
||||
//#define CALIBRATION_MEASURE_JMAX
|
||||
//#define CALIBRATION_MEASURE_KMIN
|
||||
//#define CALIBRATION_MEASURE_KMAX
|
||||
|
||||
// Probing at the exact top center only works if the center is flat. If
|
||||
// probing on a screwhead or hollow washer, probe near the edges.
|
||||
//#define CALIBRATION_MEASURE_AT_TOP_EDGES
|
||||
|
|
@ -2247,6 +2260,13 @@
|
|||
//#define EVENT_GCODE_AFTER_TOOLCHANGE "G12X" // Extra G-code to run after tool-change
|
||||
#endif
|
||||
|
||||
/**
|
||||
* Extra G-code to run while executing tool-change commands. Can be used to use an additional
|
||||
* stepper motor (I axis, see option LINEAR_AXES in Configuration.h) to drive the tool-changer.
|
||||
*/
|
||||
//#define EVENT_GCODE_TOOLCHANGE_T0 "G28 A\nG1 I0" // Extra G-code to run while executing tool-change command T0
|
||||
//#define EVENT_GCODE_TOOLCHANGE_T1 "G1 A10" // Extra G-code to run while executing tool-change command T1
|
||||
|
||||
/**
|
||||
* Tool Sensors detect when tools have been picked up or dropped.
|
||||
* Requires the pins TOOL_SENSOR1_PIN, TOOL_SENSOR2_PIN, etc.
|
||||
|
|
@ -2424,6 +2444,24 @@
|
|||
#define Z4_MICROSTEPS Z_MICROSTEPS
|
||||
#endif
|
||||
|
||||
#if AXIS_DRIVER_TYPE_I(TMC26X)
|
||||
#define I_MAX_CURRENT 1000
|
||||
#define I_SENSE_RESISTOR 91
|
||||
#define I_MICROSTEPS 16
|
||||
#endif
|
||||
|
||||
#if AXIS_DRIVER_TYPE_J(TMC26X)
|
||||
#define J_MAX_CURRENT 1000
|
||||
#define J_SENSE_RESISTOR 91
|
||||
#define J_MICROSTEPS 16
|
||||
#endif
|
||||
|
||||
#if AXIS_DRIVER_TYPE_K(TMC26X)
|
||||
#define K_MAX_CURRENT 1000
|
||||
#define K_SENSE_RESISTOR 91
|
||||
#define K_MICROSTEPS 16
|
||||
#endif
|
||||
|
||||
#if AXIS_DRIVER_TYPE_E0(TMC26X)
|
||||
#define E0_MAX_CURRENT 1000
|
||||
#define E0_SENSE_RESISTOR 91
|
||||
|
|
@ -2574,6 +2612,33 @@
|
|||
//#define Z4_INTERPOLATE true
|
||||
#endif
|
||||
|
||||
#if AXIS_IS_TMC(I)
|
||||
#define I_CURRENT 800
|
||||
#define I_CURRENT_HOME I_CURRENT
|
||||
#define I_MICROSTEPS 16
|
||||
#define I_RSENSE 0.11
|
||||
#define I_CHAIN_POS -1
|
||||
//#define I_INTERPOLATE true
|
||||
#endif
|
||||
|
||||
#if AXIS_IS_TMC(J)
|
||||
#define J_CURRENT 800
|
||||
#define J_CURRENT_HOME J_CURRENT
|
||||
#define J_MICROSTEPS 16
|
||||
#define J_RSENSE 0.11
|
||||
#define J_CHAIN_POS -1
|
||||
//#define J_INTERPOLATE true
|
||||
#endif
|
||||
|
||||
#if AXIS_IS_TMC(K)
|
||||
#define K_CURRENT 800
|
||||
#define K_CURRENT_HOME K_CURRENT
|
||||
#define K_MICROSTEPS 16
|
||||
#define K_RSENSE 0.11
|
||||
#define K_CHAIN_POS -1
|
||||
//#define K_INTERPOLATE true
|
||||
#endif
|
||||
|
||||
#if AXIS_IS_TMC(E0)
|
||||
#define E0_CURRENT 800
|
||||
#define E0_MICROSTEPS 16
|
||||
|
|
@ -2649,6 +2714,9 @@
|
|||
//#define Y2_CS_PIN -1
|
||||
//#define Z2_CS_PIN -1
|
||||
//#define Z3_CS_PIN -1
|
||||
//#define I_CS_PIN -1
|
||||
//#define J_CS_PIN -1
|
||||
//#define K_CS_PIN -1
|
||||
//#define E0_CS_PIN -1
|
||||
//#define E1_CS_PIN -1
|
||||
//#define E2_CS_PIN -1
|
||||
|
|
@ -2688,6 +2756,9 @@
|
|||
//#define Z2_SLAVE_ADDRESS 0
|
||||
//#define Z3_SLAVE_ADDRESS 0
|
||||
//#define Z4_SLAVE_ADDRESS 0
|
||||
//#define I_SLAVE_ADDRESS 0
|
||||
//#define J_SLAVE_ADDRESS 0
|
||||
//#define K_SLAVE_ADDRESS 0
|
||||
//#define E0_SLAVE_ADDRESS 0
|
||||
//#define E1_SLAVE_ADDRESS 0
|
||||
//#define E2_SLAVE_ADDRESS 0
|
||||
|
|
@ -2712,6 +2783,9 @@
|
|||
*/
|
||||
#define STEALTHCHOP_XY
|
||||
#define STEALTHCHOP_Z
|
||||
#define STEALTHCHOP_I
|
||||
#define STEALTHCHOP_J
|
||||
#define STEALTHCHOP_K
|
||||
#define STEALTHCHOP_E
|
||||
|
||||
/**
|
||||
|
|
@ -2783,6 +2857,9 @@
|
|||
#define Z2_HYBRID_THRESHOLD 3
|
||||
#define Z3_HYBRID_THRESHOLD 3
|
||||
#define Z4_HYBRID_THRESHOLD 3
|
||||
#define I_HYBRID_THRESHOLD 3
|
||||
#define J_HYBRID_THRESHOLD 3
|
||||
#define K_HYBRID_THRESHOLD 3
|
||||
#define E0_HYBRID_THRESHOLD 30
|
||||
#define E1_HYBRID_THRESHOLD 30
|
||||
#define E2_HYBRID_THRESHOLD 30
|
||||
|
|
@ -2829,6 +2906,9 @@
|
|||
//#define Z2_STALL_SENSITIVITY Z_STALL_SENSITIVITY
|
||||
//#define Z3_STALL_SENSITIVITY Z_STALL_SENSITIVITY
|
||||
//#define Z4_STALL_SENSITIVITY Z_STALL_SENSITIVITY
|
||||
//#define I_STALL_SENSITIVITY 8
|
||||
//#define J_STALL_SENSITIVITY 8
|
||||
//#define K_STALL_SENSITIVITY 8
|
||||
//#define SPI_ENDSTOPS // TMC2130 only
|
||||
//#define IMPROVE_HOMING_RELIABILITY
|
||||
#endif
|
||||
|
|
@ -2969,6 +3049,33 @@
|
|||
#define Z4_SLEW_RATE 1
|
||||
#endif
|
||||
|
||||
#if AXIS_DRIVER_TYPE_I(L6470)
|
||||
#define I_MICROSTEPS 128
|
||||
#define I_OVERCURRENT 2000
|
||||
#define I_STALLCURRENT 1500
|
||||
#define I_MAX_VOLTAGE 127
|
||||
#define I_CHAIN_POS -1
|
||||
#define I_SLEW_RATE 1
|
||||
#endif
|
||||
|
||||
#if AXIS_DRIVER_TYPE_J(L6470)
|
||||
#define J_MICROSTEPS 128
|
||||
#define J_OVERCURRENT 2000
|
||||
#define J_STALLCURRENT 1500
|
||||
#define J_MAX_VOLTAGE 127
|
||||
#define J_CHAIN_POS -1
|
||||
#define J_SLEW_RATE 1
|
||||
#endif
|
||||
|
||||
#if AXIS_DRIVER_TYPE_K(L6470)
|
||||
#define K_MICROSTEPS 128
|
||||
#define K_OVERCURRENT 2000
|
||||
#define K_STALLCURRENT 1500
|
||||
#define K_MAX_VOLTAGE 127
|
||||
#define K_CHAIN_POS -1
|
||||
#define K_SLEW_RATE 1
|
||||
#endif
|
||||
|
||||
#if AXIS_IS_L64XX(E0)
|
||||
#define E0_MICROSTEPS 128
|
||||
#define E0_OVERCURRENT 2000
|
||||
|
|
|
|||
|
|
@ -35,7 +35,7 @@
|
|||
*
|
||||
* Advanced settings can be found in Configuration_adv.h
|
||||
*/
|
||||
#define CONFIGURATION_H_VERSION 02000801
|
||||
#define CONFIGURATION_H_VERSION 02000900
|
||||
|
||||
//===========================================================================
|
||||
//============================= Getting Started =============================
|
||||
|
|
@ -187,6 +187,45 @@
|
|||
// Choose your own or use a service like https://www.uuidgenerator.net/version4
|
||||
//#define MACHINE_UUID "00000000-0000-0000-0000-000000000000"
|
||||
|
||||
/**
|
||||
* Define the number of coordinated linear axes.
|
||||
* See https://github.com/DerAndere1/Marlin/wiki
|
||||
* Each linear axis gets its own stepper control and endstop:
|
||||
*
|
||||
* Steppers: *_STEP_PIN, *_ENABLE_PIN, *_DIR_PIN, *_ENABLE_ON
|
||||
* Endstops: *_STOP_PIN, USE_*MIN_PLUG, USE_*MAX_PLUG
|
||||
* Axes: *_MIN_POS, *_MAX_POS, INVERT_*_DIR
|
||||
* Planner: DEFAULT_AXIS_STEPS_PER_UNIT, DEFAULT_MAX_FEEDRATE
|
||||
* DEFAULT_MAX_ACCELERATION, AXIS_RELATIVE_MODES,
|
||||
* MICROSTEP_MODES, MANUAL_FEEDRATE
|
||||
*
|
||||
* :[3, 4, 5, 6]
|
||||
*/
|
||||
//#define LINEAR_AXES 3
|
||||
|
||||
/**
|
||||
* Axis codes for additional axes:
|
||||
* This defines the axis code that is used in G-code commands to
|
||||
* reference a specific axis.
|
||||
* 'A' for rotational axis parallel to X
|
||||
* 'B' for rotational axis parallel to Y
|
||||
* 'C' for rotational axis parallel to Z
|
||||
* 'U' for secondary linear axis parallel to X
|
||||
* 'V' for secondary linear axis parallel to Y
|
||||
* 'W' for secondary linear axis parallel to Z
|
||||
* Regardless of the settings, firmware-internal axis IDs are
|
||||
* I (AXIS4), J (AXIS5), K (AXIS6).
|
||||
*/
|
||||
#if LINEAR_AXES >= 4
|
||||
#define AXIS4_NAME 'A' // :['A', 'B', 'C', 'U', 'V', 'W']
|
||||
#endif
|
||||
#if LINEAR_AXES >= 5
|
||||
#define AXIS5_NAME 'B' // :['A', 'B', 'C', 'U', 'V', 'W']
|
||||
#endif
|
||||
#if LINEAR_AXES >= 6
|
||||
#define AXIS6_NAME 'C' // :['A', 'B', 'C', 'U', 'V', 'W']
|
||||
#endif
|
||||
|
||||
// @section extruder
|
||||
|
||||
// This defines the number of extruders
|
||||
|
|
@ -748,9 +787,15 @@
|
|||
#define USE_XMIN_PLUG
|
||||
#define USE_YMIN_PLUG
|
||||
#define USE_ZMIN_PLUG
|
||||
//#define USE_IMIN_PLUG
|
||||
//#define USE_JMIN_PLUG
|
||||
//#define USE_KMIN_PLUG
|
||||
//#define USE_XMAX_PLUG
|
||||
//#define USE_YMAX_PLUG
|
||||
//#define USE_ZMAX_PLUG
|
||||
//#define USE_IMAX_PLUG
|
||||
//#define USE_JMAX_PLUG
|
||||
//#define USE_KMAX_PLUG
|
||||
|
||||
// Enable pullup for all endstops to prevent a floating state
|
||||
//#define ENDSTOPPULLUPS
|
||||
|
|
@ -759,9 +804,15 @@
|
|||
//#define ENDSTOPPULLUP_XMAX
|
||||
//#define ENDSTOPPULLUP_YMAX
|
||||
//#define ENDSTOPPULLUP_ZMAX
|
||||
//#define ENDSTOPPULLUP_IMAX
|
||||
//#define ENDSTOPPULLUP_JMAX
|
||||
//#define ENDSTOPPULLUP_KMAX
|
||||
//#define ENDSTOPPULLUP_XMIN
|
||||
//#define ENDSTOPPULLUP_YMIN
|
||||
//#define ENDSTOPPULLUP_ZMIN
|
||||
//#define ENDSTOPPULLUP_IMIN
|
||||
//#define ENDSTOPPULLUP_JMIN
|
||||
//#define ENDSTOPPULLUP_KMIN
|
||||
//#define ENDSTOPPULLUP_ZMIN_PROBE
|
||||
#endif
|
||||
|
||||
|
|
@ -772,9 +823,15 @@
|
|||
//#define ENDSTOPPULLDOWN_XMAX
|
||||
//#define ENDSTOPPULLDOWN_YMAX
|
||||
//#define ENDSTOPPULLDOWN_ZMAX
|
||||
//#define ENDSTOPPULLDOWN_IMAX
|
||||
//#define ENDSTOPPULLDOWN_JMAX
|
||||
//#define ENDSTOPPULLDOWN_KMAX
|
||||
//#define ENDSTOPPULLDOWN_XMIN
|
||||
//#define ENDSTOPPULLDOWN_YMIN
|
||||
//#define ENDSTOPPULLDOWN_ZMIN
|
||||
//#define ENDSTOPPULLDOWN_IMIN
|
||||
//#define ENDSTOPPULLDOWN_JMIN
|
||||
//#define ENDSTOPPULLDOWN_KMIN
|
||||
//#define ENDSTOPPULLDOWN_ZMIN_PROBE
|
||||
#endif
|
||||
|
||||
|
|
@ -782,9 +839,15 @@
|
|||
#define X_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop.
|
||||
#define Y_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop.
|
||||
#define Z_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop.
|
||||
#define I_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop.
|
||||
#define J_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop.
|
||||
#define K_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop.
|
||||
#define X_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop.
|
||||
#define Y_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop.
|
||||
#define Z_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop.
|
||||
#define I_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop.
|
||||
#define J_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop.
|
||||
#define K_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop.
|
||||
#define Z_MIN_PROBE_ENDSTOP_INVERTING false // Set to true to invert the logic of the probe.
|
||||
|
||||
/**
|
||||
|
|
@ -813,6 +876,9 @@
|
|||
//#define Z2_DRIVER_TYPE A4988
|
||||
//#define Z3_DRIVER_TYPE A4988
|
||||
//#define Z4_DRIVER_TYPE A4988
|
||||
//#define I_DRIVER_TYPE A4988
|
||||
//#define J_DRIVER_TYPE A4988
|
||||
//#define K_DRIVER_TYPE A4988
|
||||
#define E0_DRIVER_TYPE A4988
|
||||
//#define E1_DRIVER_TYPE A4988
|
||||
//#define E2_DRIVER_TYPE A4988
|
||||
|
|
@ -866,14 +932,14 @@
|
|||
/**
|
||||
* Default Axis Steps Per Unit (steps/mm)
|
||||
* Override with M92
|
||||
* X, Y, Z, E0 [, E1[, E2...]]
|
||||
* X, Y, Z [, I [, J [, K]]], E0 [, E1[, E2...]]
|
||||
*/
|
||||
#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 98 }
|
||||
|
||||
/**
|
||||
* Default Max Feed Rate (mm/s)
|
||||
* Override with M203
|
||||
* X, Y, Z, E0 [, E1[, E2...]]
|
||||
* X, Y, Z [, I [, J [, K]]], E0 [, E1[, E2...]]
|
||||
*/
|
||||
#define DEFAULT_MAX_FEEDRATE { 200, 200, 100, 25 }
|
||||
|
||||
|
|
@ -886,7 +952,7 @@
|
|||
* Default Max Acceleration (change/s) change = mm/s
|
||||
* (Maximum start speed for accelerated moves)
|
||||
* Override with M201
|
||||
* X, Y, Z, E0 [, E1[, E2...]]
|
||||
* X, Y, Z [, I [, J [, K]]], E0 [, E1[, E2...]]
|
||||
*/
|
||||
#define DEFAULT_MAX_ACCELERATION { 200, 200, 100, 3000 }
|
||||
|
||||
|
|
@ -920,6 +986,9 @@
|
|||
#define DEFAULT_XJERK 10.0
|
||||
#define DEFAULT_YJERK 10.0
|
||||
#define DEFAULT_ZJERK 0.4
|
||||
//#define DEFAULT_IJERK 0.3
|
||||
//#define DEFAULT_JJERK 0.3
|
||||
//#define DEFAULT_KJERK 0.3
|
||||
|
||||
//#define TRAVEL_EXTRA_XYJERK 0.0 // Additional jerk allowance for all travel moves
|
||||
|
||||
|
|
@ -1235,12 +1304,18 @@
|
|||
#define Y_ENABLE_ON 0
|
||||
#define Z_ENABLE_ON 0
|
||||
#define E_ENABLE_ON 0 // For all extruders
|
||||
//#define I_ENABLE_ON 0
|
||||
//#define J_ENABLE_ON 0
|
||||
//#define K_ENABLE_ON 0
|
||||
|
||||
// Disable axis steppers immediately when they're not being stepped.
|
||||
// WARNING: When motors turn off there is a chance of losing position accuracy!
|
||||
#define DISABLE_X false
|
||||
#define DISABLE_Y false
|
||||
#define DISABLE_Z false
|
||||
//#define DISABLE_I false
|
||||
//#define DISABLE_J false
|
||||
//#define DISABLE_K false
|
||||
|
||||
// Turn off the display blinking that warns about possible accuracy reduction
|
||||
//#define DISABLE_REDUCED_ACCURACY_WARNING
|
||||
|
|
@ -1256,6 +1331,9 @@
|
|||
#define INVERT_X_DIR true
|
||||
#define INVERT_Y_DIR false
|
||||
#define INVERT_Z_DIR true
|
||||
//#define INVERT_I_DIR false
|
||||
//#define INVERT_J_DIR false
|
||||
//#define INVERT_K_DIR false
|
||||
|
||||
// @section extruder
|
||||
|
||||
|
|
@ -1291,6 +1369,9 @@
|
|||
#define X_HOME_DIR -1
|
||||
#define Y_HOME_DIR -1
|
||||
#define Z_HOME_DIR -1
|
||||
//#define I_HOME_DIR -1
|
||||
//#define J_HOME_DIR -1
|
||||
//#define K_HOME_DIR -1
|
||||
|
||||
// @section machine
|
||||
|
||||
|
|
@ -1319,6 +1400,12 @@
|
|||
#define X_MAX_POS X_BED_SIZE
|
||||
#define Y_MAX_POS Y_BED_SIZE
|
||||
#define Z_MAX_POS Z_MACHINE_MAX
|
||||
//#define I_MIN_POS 0
|
||||
//#define I_MAX_POS 50
|
||||
//#define J_MIN_POS 0
|
||||
//#define J_MAX_POS 50
|
||||
//#define K_MIN_POS 0
|
||||
//#define K_MAX_POS 50
|
||||
|
||||
/**
|
||||
* Software Endstops
|
||||
|
|
@ -1335,6 +1422,9 @@
|
|||
#define MIN_SOFTWARE_ENDSTOP_X
|
||||
#define MIN_SOFTWARE_ENDSTOP_Y
|
||||
#define MIN_SOFTWARE_ENDSTOP_Z
|
||||
#define MIN_SOFTWARE_ENDSTOP_I
|
||||
#define MIN_SOFTWARE_ENDSTOP_J
|
||||
#define MIN_SOFTWARE_ENDSTOP_K
|
||||
#endif
|
||||
|
||||
// Max software endstops constrain movement within maximum coordinate bounds
|
||||
|
|
@ -1343,6 +1433,9 @@
|
|||
#define MAX_SOFTWARE_ENDSTOP_X
|
||||
#define MAX_SOFTWARE_ENDSTOP_Y
|
||||
#define MAX_SOFTWARE_ENDSTOP_Z
|
||||
#define MAX_SOFTWARE_ENDSTOP_I
|
||||
#define MAX_SOFTWARE_ENDSTOP_J
|
||||
#define MAX_SOFTWARE_ENDSTOP_K
|
||||
#endif
|
||||
|
||||
#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS)
|
||||
|
|
|
|||
|
|
@ -30,7 +30,7 @@
|
|||
*
|
||||
* Basic settings can be found in Configuration.h
|
||||
*/
|
||||
#define CONFIGURATION_ADV_H_VERSION 02000801
|
||||
#define CONFIGURATION_ADV_H_VERSION 02000900
|
||||
|
||||
//===========================================================================
|
||||
//============================= Thermal Settings ============================
|
||||
|
|
@ -918,6 +918,9 @@
|
|||
#define INVERT_X_STEP_PIN false
|
||||
#define INVERT_Y_STEP_PIN false
|
||||
#define INVERT_Z_STEP_PIN false
|
||||
#define INVERT_I_STEP_PIN false
|
||||
#define INVERT_J_STEP_PIN false
|
||||
#define INVERT_K_STEP_PIN false
|
||||
#define INVERT_E_STEP_PIN false
|
||||
|
||||
/**
|
||||
|
|
@ -929,6 +932,9 @@
|
|||
#define DISABLE_INACTIVE_X true
|
||||
#define DISABLE_INACTIVE_Y true
|
||||
#define DISABLE_INACTIVE_Z true // Set 'false' if the nozzle could fall onto your printed part!
|
||||
#define DISABLE_INACTIVE_I true
|
||||
#define DISABLE_INACTIVE_J true
|
||||
#define DISABLE_INACTIVE_K true
|
||||
#define DISABLE_INACTIVE_E true
|
||||
|
||||
// Default Minimum Feedrates for printing and travel moves
|
||||
|
|
@ -969,7 +975,7 @@
|
|||
#if ENABLED(BACKLASH_COMPENSATION)
|
||||
// Define values for backlash distance and correction.
|
||||
// If BACKLASH_GCODE is enabled these values are the defaults.
|
||||
#define BACKLASH_DISTANCE_MM { 0, 0, 0 } // (mm)
|
||||
#define BACKLASH_DISTANCE_MM { 0, 0, 0 } // (mm) One value for each linear axis
|
||||
#define BACKLASH_CORRECTION 0.0 // 0.0 = no correction; 1.0 = full correction
|
||||
|
||||
// Add steps for motor direction changes on CORE kinematics
|
||||
|
|
@ -1040,6 +1046,13 @@
|
|||
#define CALIBRATION_MEASURE_LEFT
|
||||
#define CALIBRATION_MEASURE_BACK
|
||||
|
||||
//#define CALIBRATION_MEASURE_IMIN
|
||||
//#define CALIBRATION_MEASURE_IMAX
|
||||
//#define CALIBRATION_MEASURE_JMIN
|
||||
//#define CALIBRATION_MEASURE_JMAX
|
||||
//#define CALIBRATION_MEASURE_KMIN
|
||||
//#define CALIBRATION_MEASURE_KMAX
|
||||
|
||||
// Probing at the exact top center only works if the center is flat. If
|
||||
// probing on a screwhead or hollow washer, probe near the edges.
|
||||
//#define CALIBRATION_MEASURE_AT_TOP_EDGES
|
||||
|
|
@ -2237,6 +2250,13 @@
|
|||
//#define EVENT_GCODE_AFTER_TOOLCHANGE "G12X" // Extra G-code to run after tool-change
|
||||
#endif
|
||||
|
||||
/**
|
||||
* Extra G-code to run while executing tool-change commands. Can be used to use an additional
|
||||
* stepper motor (I axis, see option LINEAR_AXES in Configuration.h) to drive the tool-changer.
|
||||
*/
|
||||
//#define EVENT_GCODE_TOOLCHANGE_T0 "G28 A\nG1 I0" // Extra G-code to run while executing tool-change command T0
|
||||
//#define EVENT_GCODE_TOOLCHANGE_T1 "G1 A10" // Extra G-code to run while executing tool-change command T1
|
||||
|
||||
/**
|
||||
* Tool Sensors detect when tools have been picked up or dropped.
|
||||
* Requires the pins TOOL_SENSOR1_PIN, TOOL_SENSOR2_PIN, etc.
|
||||
|
|
@ -2414,6 +2434,24 @@
|
|||
#define Z4_MICROSTEPS Z_MICROSTEPS
|
||||
#endif
|
||||
|
||||
#if AXIS_DRIVER_TYPE_I(TMC26X)
|
||||
#define I_MAX_CURRENT 1000
|
||||
#define I_SENSE_RESISTOR 91
|
||||
#define I_MICROSTEPS 16
|
||||
#endif
|
||||
|
||||
#if AXIS_DRIVER_TYPE_J(TMC26X)
|
||||
#define J_MAX_CURRENT 1000
|
||||
#define J_SENSE_RESISTOR 91
|
||||
#define J_MICROSTEPS 16
|
||||
#endif
|
||||
|
||||
#if AXIS_DRIVER_TYPE_K(TMC26X)
|
||||
#define K_MAX_CURRENT 1000
|
||||
#define K_SENSE_RESISTOR 91
|
||||
#define K_MICROSTEPS 16
|
||||
#endif
|
||||
|
||||
#if AXIS_DRIVER_TYPE_E0(TMC26X)
|
||||
#define E0_MAX_CURRENT 1000
|
||||
#define E0_SENSE_RESISTOR 91
|
||||
|
|
@ -2564,6 +2602,33 @@
|
|||
//#define Z4_INTERPOLATE true
|
||||
#endif
|
||||
|
||||
#if AXIS_IS_TMC(I)
|
||||
#define I_CURRENT 800
|
||||
#define I_CURRENT_HOME I_CURRENT
|
||||
#define I_MICROSTEPS 16
|
||||
#define I_RSENSE 0.11
|
||||
#define I_CHAIN_POS -1
|
||||
//#define I_INTERPOLATE true
|
||||
#endif
|
||||
|
||||
#if AXIS_IS_TMC(J)
|
||||
#define J_CURRENT 800
|
||||
#define J_CURRENT_HOME J_CURRENT
|
||||
#define J_MICROSTEPS 16
|
||||
#define J_RSENSE 0.11
|
||||
#define J_CHAIN_POS -1
|
||||
//#define J_INTERPOLATE true
|
||||
#endif
|
||||
|
||||
#if AXIS_IS_TMC(K)
|
||||
#define K_CURRENT 800
|
||||
#define K_CURRENT_HOME K_CURRENT
|
||||
#define K_MICROSTEPS 16
|
||||
#define K_RSENSE 0.11
|
||||
#define K_CHAIN_POS -1
|
||||
//#define K_INTERPOLATE true
|
||||
#endif
|
||||
|
||||
#if AXIS_IS_TMC(E0)
|
||||
#define E0_CURRENT 800
|
||||
#define E0_MICROSTEPS 16
|
||||
|
|
@ -2639,6 +2704,9 @@
|
|||
//#define Y2_CS_PIN -1
|
||||
//#define Z2_CS_PIN -1
|
||||
//#define Z3_CS_PIN -1
|
||||
//#define I_CS_PIN -1
|
||||
//#define J_CS_PIN -1
|
||||
//#define K_CS_PIN -1
|
||||
//#define E0_CS_PIN -1
|
||||
//#define E1_CS_PIN -1
|
||||
//#define E2_CS_PIN -1
|
||||
|
|
@ -2678,6 +2746,9 @@
|
|||
//#define Z2_SLAVE_ADDRESS 0
|
||||
//#define Z3_SLAVE_ADDRESS 0
|
||||
//#define Z4_SLAVE_ADDRESS 0
|
||||
//#define I_SLAVE_ADDRESS 0
|
||||
//#define J_SLAVE_ADDRESS 0
|
||||
//#define K_SLAVE_ADDRESS 0
|
||||
//#define E0_SLAVE_ADDRESS 0
|
||||
//#define E1_SLAVE_ADDRESS 0
|
||||
//#define E2_SLAVE_ADDRESS 0
|
||||
|
|
@ -2702,6 +2773,9 @@
|
|||
*/
|
||||
#define STEALTHCHOP_XY
|
||||
#define STEALTHCHOP_Z
|
||||
#define STEALTHCHOP_I
|
||||
#define STEALTHCHOP_J
|
||||
#define STEALTHCHOP_K
|
||||
#define STEALTHCHOP_E
|
||||
|
||||
/**
|
||||
|
|
@ -2773,6 +2847,9 @@
|
|||
#define Z2_HYBRID_THRESHOLD 3
|
||||
#define Z3_HYBRID_THRESHOLD 3
|
||||
#define Z4_HYBRID_THRESHOLD 3
|
||||
#define I_HYBRID_THRESHOLD 3
|
||||
#define J_HYBRID_THRESHOLD 3
|
||||
#define K_HYBRID_THRESHOLD 3
|
||||
#define E0_HYBRID_THRESHOLD 30
|
||||
#define E1_HYBRID_THRESHOLD 30
|
||||
#define E2_HYBRID_THRESHOLD 30
|
||||
|
|
@ -2819,6 +2896,9 @@
|
|||
//#define Z2_STALL_SENSITIVITY Z_STALL_SENSITIVITY
|
||||
//#define Z3_STALL_SENSITIVITY Z_STALL_SENSITIVITY
|
||||
//#define Z4_STALL_SENSITIVITY Z_STALL_SENSITIVITY
|
||||
//#define I_STALL_SENSITIVITY 8
|
||||
//#define J_STALL_SENSITIVITY 8
|
||||
//#define K_STALL_SENSITIVITY 8
|
||||
//#define SPI_ENDSTOPS // TMC2130 only
|
||||
//#define IMPROVE_HOMING_RELIABILITY
|
||||
#endif
|
||||
|
|
@ -2959,6 +3039,33 @@
|
|||
#define Z4_SLEW_RATE 1
|
||||
#endif
|
||||
|
||||
#if AXIS_DRIVER_TYPE_I(L6470)
|
||||
#define I_MICROSTEPS 128
|
||||
#define I_OVERCURRENT 2000
|
||||
#define I_STALLCURRENT 1500
|
||||
#define I_MAX_VOLTAGE 127
|
||||
#define I_CHAIN_POS -1
|
||||
#define I_SLEW_RATE 1
|
||||
#endif
|
||||
|
||||
#if AXIS_DRIVER_TYPE_J(L6470)
|
||||
#define J_MICROSTEPS 128
|
||||
#define J_OVERCURRENT 2000
|
||||
#define J_STALLCURRENT 1500
|
||||
#define J_MAX_VOLTAGE 127
|
||||
#define J_CHAIN_POS -1
|
||||
#define J_SLEW_RATE 1
|
||||
#endif
|
||||
|
||||
#if AXIS_DRIVER_TYPE_K(L6470)
|
||||
#define K_MICROSTEPS 128
|
||||
#define K_OVERCURRENT 2000
|
||||
#define K_STALLCURRENT 1500
|
||||
#define K_MAX_VOLTAGE 127
|
||||
#define K_CHAIN_POS -1
|
||||
#define K_SLEW_RATE 1
|
||||
#endif
|
||||
|
||||
#if AXIS_IS_L64XX(E0)
|
||||
#define E0_MICROSTEPS 128
|
||||
#define E0_OVERCURRENT 2000
|
||||
|
|
|
|||
Loading…
Add table
Add a link
Reference in a new issue