✨ BED_ANNEALING_GCODE

MarlinFirmware/Marlin#26341

config/default/Configuration.h

@@ -790,6 +790,9 @@
   //#define BED_LIMIT_SWITCHING   // Keep the bed temperature within BED_HYSTERESIS of the target
 #endif
 
+// Add 'M190 R T' for more gradual M190 R bed cooling.
+//#define BED_ANNEALING_GCODE
+
 //===========================================================================
 //==================== PID > Chamber Temperature Control ====================
 //===========================================================================

config/examples/3DFabXYZ/Migbot/Configuration.h

@@ -792,6 +792,9 @@
   //#define BED_LIMIT_SWITCHING   // Keep the bed temperature within BED_HYSTERESIS of the target
 #endif
 
+// Add 'M190 R T' for more gradual M190 R bed cooling.
+//#define BED_ANNEALING_GCODE
+
 //===========================================================================
 //==================== PID > Chamber Temperature Control ====================
 //===========================================================================

config/examples/ADIMLab/Gantry v1/Configuration.h

@@ -790,6 +790,9 @@
   //#define BED_LIMIT_SWITCHING   // Keep the bed temperature within BED_HYSTERESIS of the target
 #endif
 
+// Add 'M190 R T' for more gradual M190 R bed cooling.
+//#define BED_ANNEALING_GCODE
+
 //===========================================================================
 //==================== PID > Chamber Temperature Control ====================
 //===========================================================================

config/examples/ADIMLab/Gantry v2/Configuration.h

@@ -790,6 +790,9 @@
   //#define BED_LIMIT_SWITCHING   // Keep the bed temperature within BED_HYSTERESIS of the target
 #endif
 
+// Add 'M190 R T' for more gradual M190 R bed cooling.
+//#define BED_ANNEALING_GCODE
+
 //===========================================================================
 //==================== PID > Chamber Temperature Control ====================
 //===========================================================================

config/examples/Alfawise/U20-bltouch/Configuration.h

@@ -859,6 +859,9 @@
   //#define BED_LIMIT_SWITCHING   // Keep the bed temperature within BED_HYSTERESIS of the target
 #endif
 
+// Add 'M190 R T' for more gradual M190 R bed cooling.
+//#define BED_ANNEALING_GCODE
+
 //===========================================================================
 //==================== PID > Chamber Temperature Control ====================
 //===========================================================================

config/examples/Alfawise/U20/Configuration.h

@@ -860,6 +860,9 @@
   //#define BED_LIMIT_SWITCHING   // Keep the bed temperature within BED_HYSTERESIS of the target
 #endif
 
+// Add 'M190 R T' for more gradual M190 R bed cooling.
+//#define BED_ANNEALING_GCODE
+
 //===========================================================================
 //==================== PID > Chamber Temperature Control ====================
 //===========================================================================

config/examples/AliExpress/CL-260/Configuration.h

@@ -790,6 +790,9 @@
   //#define BED_LIMIT_SWITCHING   // Keep the bed temperature within BED_HYSTERESIS of the target
 #endif
 
+// Add 'M190 R T' for more gradual M190 R bed cooling.
+//#define BED_ANNEALING_GCODE
+
 //===========================================================================
 //==================== PID > Chamber Temperature Control ====================
 //===========================================================================

config/examples/AliExpress/UM2pExt/Configuration.h

@@ -791,6 +791,9 @@
   //#define BED_LIMIT_SWITCHING   // Keep the bed temperature within BED_HYSTERESIS of the target
 #endif
 
+// Add 'M190 R T' for more gradual M190 R bed cooling.
+//#define BED_ANNEALING_GCODE
+
 //===========================================================================
 //==================== PID > Chamber Temperature Control ====================
 //===========================================================================

config/examples/Anet/A2/Configuration.h

@@ -790,6 +790,9 @@
   //#define BED_LIMIT_SWITCHING   // Keep the bed temperature within BED_HYSTERESIS of the target
 #endif
 
+// Add 'M190 R T' for more gradual M190 R bed cooling.
+//#define BED_ANNEALING_GCODE
+
 //===========================================================================
 //==================== PID > Chamber Temperature Control ====================
 //===========================================================================

config/examples/Anet/A2plus/Configuration.h

@@ -790,6 +790,9 @@
   //#define BED_LIMIT_SWITCHING   // Keep the bed temperature within BED_HYSTERESIS of the target
 #endif
 
+// Add 'M190 R T' for more gradual M190 R bed cooling.
+//#define BED_ANNEALING_GCODE
+
 //===========================================================================
 //==================== PID > Chamber Temperature Control ====================
 //===========================================================================

config/examples/Anet/A6/Configuration.h

@@ -791,6 +791,9 @@
   //#define BED_LIMIT_SWITCHING   // Keep the bed temperature within BED_HYSTERESIS of the target
 #endif
 
+// Add 'M190 R T' for more gradual M190 R bed cooling.
+//#define BED_ANNEALING_GCODE
+
 //===========================================================================
 //==================== PID > Chamber Temperature Control ====================
 //===========================================================================

config/examples/Anet/A8/Configuration.h

@@ -793,6 +793,9 @@
   //#define BED_LIMIT_SWITCHING   // Keep the bed temperature within BED_HYSTERESIS of the target
 #endif
 
+// Add 'M190 R T' for more gradual M190 R bed cooling.
+//#define BED_ANNEALING_GCODE
+
 //===========================================================================
 //==================== PID > Chamber Temperature Control ====================
 //===========================================================================

config/examples/Anet/A8plus/Configuration.h

@@ -792,6 +792,9 @@
   //#define BED_LIMIT_SWITCHING   // Keep the bed temperature within BED_HYSTERESIS of the target
 #endif
 
+// Add 'M190 R T' for more gradual M190 R bed cooling.
+//#define BED_ANNEALING_GCODE
+
 //===========================================================================
 //==================== PID > Chamber Temperature Control ====================
 //===========================================================================

config/examples/Anet/A9/Configuration.h

@@ -790,6 +790,9 @@
   //#define BED_LIMIT_SWITCHING   // Keep the bed temperature within BED_HYSTERESIS of the target
 #endif
 
+// Add 'M190 R T' for more gradual M190 R bed cooling.
+//#define BED_ANNEALING_GCODE
+
 //===========================================================================
 //==================== PID > Chamber Temperature Control ====================
 //===========================================================================

config/examples/Anet/E10/Configuration.h

@@ -790,6 +790,9 @@
   //#define BED_LIMIT_SWITCHING   // Keep the bed temperature within BED_HYSTERESIS of the target
 #endif
 
+// Add 'M190 R T' for more gradual M190 R bed cooling.
+//#define BED_ANNEALING_GCODE
+
 //===========================================================================
 //==================== PID > Chamber Temperature Control ====================
 //===========================================================================

config/examples/Anet/E16/BTT SKR 1.3/Configuration.h

@@ -792,6 +792,9 @@
   //#define BED_LIMIT_SWITCHING   // Keep the bed temperature within BED_HYSTERESIS of the target
 #endif
 
+// Add 'M190 R T' for more gradual M190 R bed cooling.
+//#define BED_ANNEALING_GCODE
+
 //===========================================================================
 //==================== PID > Chamber Temperature Control ====================
 //===========================================================================

config/examples/Anet/E16/Stock/Configuration.h

@@ -792,6 +792,9 @@
   //#define BED_LIMIT_SWITCHING   // Keep the bed temperature within BED_HYSTERESIS of the target
 #endif
 
+// Add 'M190 R T' for more gradual M190 R bed cooling.
+//#define BED_ANNEALING_GCODE
+
 //===========================================================================
 //==================== PID > Chamber Temperature Control ====================
 //===========================================================================

config/examples/Anet/ET4+/Configuration.h

@@ -796,6 +796,9 @@
   //#define BED_LIMIT_SWITCHING   // Keep the bed temperature within BED_HYSTERESIS of the target
 #endif
 
+// Add 'M190 R T' for more gradual M190 R bed cooling.
+//#define BED_ANNEALING_GCODE
+
 //===========================================================================
 //==================== PID > Chamber Temperature Control ====================
 //===========================================================================

config/examples/Anet/ET4-Pro/Configuration.h

@@ -796,6 +796,9 @@
   //#define BED_LIMIT_SWITCHING   // Keep the bed temperature within BED_HYSTERESIS of the target
 #endif
 
+// Add 'M190 R T' for more gradual M190 R bed cooling.
+//#define BED_ANNEALING_GCODE
+
 //===========================================================================
 //==================== PID > Chamber Temperature Control ====================
 //===========================================================================

config/examples/Anet/ET4/Configuration.h

@@ -796,6 +796,9 @@
   //#define BED_LIMIT_SWITCHING   // Keep the bed temperature within BED_HYSTERESIS of the target
 #endif
 
+// Add 'M190 R T' for more gradual M190 R bed cooling.
+//#define BED_ANNEALING_GCODE
+
 //===========================================================================
 //==================== PID > Chamber Temperature Control ====================
 //===========================================================================

config/examples/Anet/ET4X/Configuration.h

@@ -796,6 +796,9 @@
   //#define BED_LIMIT_SWITCHING   // Keep the bed temperature within BED_HYSTERESIS of the target
 #endif
 
+// Add 'M190 R T' for more gradual M190 R bed cooling.
+//#define BED_ANNEALING_GCODE
+
 //===========================================================================
 //==================== PID > Chamber Temperature Control ====================
 //===========================================================================

config/examples/Anet/ET5-Pro/Configuration.h

@@ -790,6 +790,9 @@
   //#define BED_LIMIT_SWITCHING   // Keep the bed temperature within BED_HYSTERESIS of the target
 #endif
 
+// Add 'M190 R T' for more gradual M190 R bed cooling.
+//#define BED_ANNEALING_GCODE
+
 //===========================================================================
 //==================== PID > Chamber Temperature Control ====================
 //===========================================================================

config/examples/Anet/ET5/Configuration.h

@@ -790,6 +790,9 @@
   //#define BED_LIMIT_SWITCHING   // Keep the bed temperature within BED_HYSTERESIS of the target
 #endif
 
+// Add 'M190 R T' for more gradual M190 R bed cooling.
+//#define BED_ANNEALING_GCODE
+
 //===========================================================================
 //==================== PID > Chamber Temperature Control ====================
 //===========================================================================

config/examples/Anet/ET5X/Configuration.h

@@ -790,6 +790,9 @@
   //#define BED_LIMIT_SWITCHING   // Keep the bed temperature within BED_HYSTERESIS of the target
 #endif
 
+// Add 'M190 R T' for more gradual M190 R bed cooling.
+//#define BED_ANNEALING_GCODE
+
 //===========================================================================
 //==================== PID > Chamber Temperature Control ====================
 //===========================================================================

config/examples/AnyCubic/Chiron/Configuration.h

@@ -793,6 +793,9 @@
   //#define BED_LIMIT_SWITCHING   // Keep the bed temperature within BED_HYSTERESIS of the target
 #endif
 
+// Add 'M190 R T' for more gradual M190 R bed cooling.
+//#define BED_ANNEALING_GCODE
+
 //===========================================================================
 //==================== PID > Chamber Temperature Control ====================
 //===========================================================================

config/examples/AnyCubic/Mega Zero 2.0/Anycubic V1/Configuration.h

@@ -791,6 +791,9 @@
   //#define BED_LIMIT_SWITCHING   // Keep the bed temperature within BED_HYSTERESIS of the target
 #endif
 
+// Add 'M190 R T' for more gradual M190 R bed cooling.
+//#define BED_ANNEALING_GCODE
+
 //===========================================================================
 //==================== PID > Chamber Temperature Control ====================
 //===========================================================================

config/examples/AnyCubic/Mega Zero/Anycubic V1/Configuration.h

@@ -791,6 +791,9 @@
   //#define BED_LIMIT_SWITCHING   // Keep the bed temperature within BED_HYSTERESIS of the target
 #endif
 
+// Add 'M190 R T' for more gradual M190 R bed cooling.
+//#define BED_ANNEALING_GCODE
+
 //===========================================================================
 //==================== PID > Chamber Temperature Control ====================
 //===========================================================================

config/examples/AnyCubic/Mega Zero/BigTreeTech SKR Mini MZ V1.0/Configuration.h

@@ -790,6 +790,9 @@
   //#define BED_LIMIT_SWITCHING   // Keep the bed temperature within BED_HYSTERESIS of the target
 #endif
 
+// Add 'M190 R T' for more gradual M190 R bed cooling.
+//#define BED_ANNEALING_GCODE
+
 //===========================================================================
 //==================== PID > Chamber Temperature Control ====================
 //===========================================================================

config/examples/AnyCubic/Vyper/Configuration.h

@@ -790,6 +790,9 @@
   //#define BED_LIMIT_SWITCHING   // Keep the bed temperature within BED_HYSTERESIS of the target
 #endif
 
+// Add 'M190 R T' for more gradual M190 R bed cooling.
+//#define BED_ANNEALING_GCODE
+
 //===========================================================================
 //==================== PID > Chamber Temperature Control ====================
 //===========================================================================

config/examples/AnyCubic/i3 Mega/Trigorilla AVR/Configuration.h

@@ -829,6 +829,9 @@
   //#define BED_LIMIT_SWITCHING   // Keep the bed temperature within BED_HYSTERESIS of the target
 #endif
 
+// Add 'M190 R T' for more gradual M190 R bed cooling.
+//#define BED_ANNEALING_GCODE
+
 //===========================================================================
 //==================== PID > Chamber Temperature Control ====================
 //===========================================================================

config/examples/AnyCubic/i3 Mega/Trigorilla Pro STM32/Configuration.h

@@ -800,6 +800,9 @@
   //#define BED_LIMIT_SWITCHING   // Keep the bed temperature within BED_HYSTERESIS of the target
 #endif
 
+// Add 'M190 R T' for more gradual M190 R bed cooling.
+//#define BED_ANNEALING_GCODE
+
 //===========================================================================
 //==================== PID > Chamber Temperature Control ====================
 //===========================================================================

config/examples/AnyCubic/i3/Configuration.h

@@ -790,6 +790,9 @@
   //#define BED_LIMIT_SWITCHING   // Keep the bed temperature within BED_HYSTERESIS of the target
 #endif
 
+// Add 'M190 R T' for more gradual M190 R bed cooling.
+//#define BED_ANNEALING_GCODE
+
 //===========================================================================
 //==================== PID > Chamber Temperature Control ====================
 //===========================================================================

config/examples/ArmEd/Configuration.h

@@ -791,6 +791,9 @@
   //#define BED_LIMIT_SWITCHING   // Keep the bed temperature within BED_HYSTERESIS of the target
 #endif
 
+// Add 'M190 R T' for more gradual M190 R bed cooling.
+//#define BED_ANNEALING_GCODE
+
 //===========================================================================
 //==================== PID > Chamber Temperature Control ====================
 //===========================================================================

config/examples/Artillery/Genius Pro/Configuration.h

@@ -790,6 +790,9 @@
   //#define BED_LIMIT_SWITCHING   // Keep the bed temperature within BED_HYSTERESIS of the target
 #endif
 
+// Add 'M190 R T' for more gradual M190 R bed cooling.
+//#define BED_ANNEALING_GCODE
+
 //===========================================================================
 //==================== PID > Chamber Temperature Control ====================
 //===========================================================================

config/examples/Artillery/Genius/BLTouch/Configuration.h

@@ -790,6 +790,9 @@
   //#define BED_LIMIT_SWITCHING   // Keep the bed temperature within BED_HYSTERESIS of the target
 #endif
 
+// Add 'M190 R T' for more gradual M190 R bed cooling.
+//#define BED_ANNEALING_GCODE
+
 //===========================================================================
 //==================== PID > Chamber Temperature Control ====================
 //===========================================================================

config/examples/Artillery/Genius/V1/Configuration.h

@@ -790,6 +790,9 @@
   //#define BED_LIMIT_SWITCHING   // Keep the bed temperature within BED_HYSTERESIS of the target
 #endif
 
+// Add 'M190 R T' for more gradual M190 R bed cooling.
+//#define BED_ANNEALING_GCODE
+
 //===========================================================================
 //==================== PID > Chamber Temperature Control ====================
 //===========================================================================

config/examples/Artillery/Hornet/Configuration.h

@@ -790,6 +790,9 @@
   //#define BED_LIMIT_SWITCHING   // Keep the bed temperature within BED_HYSTERESIS of the target
 #endif
 
+// Add 'M190 R T' for more gradual M190 R bed cooling.
+//#define BED_ANNEALING_GCODE
+
 //===========================================================================
 //==================== PID > Chamber Temperature Control ====================
 //===========================================================================

config/examples/Artillery/Sidewinder X1/0.9 BMG - E3D V6/Configuration.h

@@ -805,6 +805,9 @@
   //#define BED_LIMIT_SWITCHING   // Keep the bed temperature within BED_HYSTERESIS of the target
 #endif
 
+// Add 'M190 R T' for more gradual M190 R bed cooling.
+//#define BED_ANNEALING_GCODE
+
 //===========================================================================
 //==================== PID > Chamber Temperature Control ====================
 //===========================================================================

config/examples/Artillery/Sidewinder X1/V1/Configuration.h

@@ -790,6 +790,9 @@
   //#define BED_LIMIT_SWITCHING   // Keep the bed temperature within BED_HYSTERESIS of the target
 #endif
 
+// Add 'M190 R T' for more gradual M190 R bed cooling.
+//#define BED_ANNEALING_GCODE
+
 //===========================================================================
 //==================== PID > Chamber Temperature Control ====================
 //===========================================================================

config/examples/Artillery/Sidewinder X2/Configuration.h

@@ -790,6 +790,9 @@
   //#define BED_LIMIT_SWITCHING   // Keep the bed temperature within BED_HYSTERESIS of the target
 #endif
 
+// Add 'M190 R T' for more gradual M190 R bed cooling.
+//#define BED_ANNEALING_GCODE
+
 //===========================================================================
 //==================== PID > Chamber Temperature Control ====================
 //===========================================================================

config/examples/Azteeg/X5GT/Configuration.h

@@ -790,6 +790,9 @@
   //#define BED_LIMIT_SWITCHING   // Keep the bed temperature within BED_HYSTERESIS of the target
 #endif
 
+// Add 'M190 R T' for more gradual M190 R bed cooling.
+//#define BED_ANNEALING_GCODE
+
 //===========================================================================
 //==================== PID > Chamber Temperature Control ====================
 //===========================================================================

config/examples/BIBO/TouchX/cyclops/Configuration.h

@@ -790,6 +790,9 @@
   //#define BED_LIMIT_SWITCHING   // Keep the bed temperature within BED_HYSTERESIS of the target
 #endif
 
+// Add 'M190 R T' for more gradual M190 R bed cooling.
+//#define BED_ANNEALING_GCODE
+
 //===========================================================================
 //==================== PID > Chamber Temperature Control ====================
 //===========================================================================

config/examples/BIBO/TouchX/default/Configuration.h

@@ -790,6 +790,9 @@
   //#define BED_LIMIT_SWITCHING   // Keep the bed temperature within BED_HYSTERESIS of the target
 #endif
 
+// Add 'M190 R T' for more gradual M190 R bed cooling.
+//#define BED_ANNEALING_GCODE
+
 //===========================================================================
 //==================== PID > Chamber Temperature Control ====================
 //===========================================================================

config/examples/BIQU/B1 SE Plus/Configuration.h

@@ -788,6 +788,9 @@
   //#define BED_LIMIT_SWITCHING   // Keep the bed temperature within BED_HYSTERESIS of the target
 #endif
 
+// Add 'M190 R T' for more gradual M190 R bed cooling.
+//#define BED_ANNEALING_GCODE
+
 //===========================================================================
 //==================== PID > Chamber Temperature Control ====================
 //===========================================================================

config/examples/BIQU/B1 SE/Configuration.h

@@ -788,6 +788,9 @@
   //#define BED_LIMIT_SWITCHING   // Keep the bed temperature within BED_HYSTERESIS of the target
 #endif
 
+// Add 'M190 R T' for more gradual M190 R bed cooling.
+//#define BED_ANNEALING_GCODE
+
 //===========================================================================
 //==================== PID > Chamber Temperature Control ====================
 //===========================================================================

config/examples/BIQU/B1/Configuration.h

@@ -797,6 +797,9 @@
   //#define BED_LIMIT_SWITCHING   // Keep the bed temperature within BED_HYSTERESIS of the target
 #endif
 
+// Add 'M190 R T' for more gradual M190 R bed cooling.
+//#define BED_ANNEALING_GCODE
+
 //===========================================================================
 //==================== PID > Chamber Temperature Control ====================
 //===========================================================================

config/examples/BIQU/BX/Configuration.h

@@ -797,6 +797,9 @@
   //#define BED_LIMIT_SWITCHING   // Keep the bed temperature within BED_HYSTERESIS of the target
 #endif
 
+// Add 'M190 R T' for more gradual M190 R bed cooling.
+//#define BED_ANNEALING_GCODE
+
 //===========================================================================
 //==================== PID > Chamber Temperature Control ====================
 //===========================================================================

config/examples/BIQU/Hurakan/Configuration.h

@@ -790,6 +790,9 @@
   //#define BED_LIMIT_SWITCHING   // Keep the bed temperature within BED_HYSTERESIS of the target
 #endif
 
+// Add 'M190 R T' for more gradual M190 R bed cooling.
+//#define BED_ANNEALING_GCODE
+
 //===========================================================================
 //==================== PID > Chamber Temperature Control ====================
 //===========================================================================

config/examples/BIQU/Thunder Standard/Configuration.h

@@ -790,6 +790,9 @@
   //#define BED_LIMIT_SWITCHING   // Keep the bed temperature within BED_HYSTERESIS of the target
 #endif
 
+// Add 'M190 R T' for more gradual M190 R bed cooling.
+//#define BED_ANNEALING_GCODE
+
 //===========================================================================
 //==================== PID > Chamber Temperature Control ====================
 //===========================================================================

config/examples/BQ/Hephestos/Configuration.h

@@ -791,6 +791,9 @@
   //#define BED_LIMIT_SWITCHING   // Keep the bed temperature within BED_HYSTERESIS of the target
 #endif
 
+// Add 'M190 R T' for more gradual M190 R bed cooling.
+//#define BED_ANNEALING_GCODE
+
 //===========================================================================
 //==================== PID > Chamber Temperature Control ====================
 //===========================================================================

config/examples/BQ/Hephestos_2/Configuration.h

@@ -804,6 +804,9 @@
   //#define BED_LIMIT_SWITCHING   // Keep the bed temperature within BED_HYSTERESIS of the target
 #endif
 
+// Add 'M190 R T' for more gradual M190 R bed cooling.
+//#define BED_ANNEALING_GCODE
+
 //===========================================================================
 //==================== PID > Chamber Temperature Control ====================
 //===========================================================================

config/examples/BQ/WITBOX/Configuration.h

@@ -791,6 +791,9 @@
   //#define BED_LIMIT_SWITCHING   // Keep the bed temperature within BED_HYSTERESIS of the target
 #endif
 
+// Add 'M190 R T' for more gradual M190 R bed cooling.
+//#define BED_ANNEALING_GCODE
+
 //===========================================================================
 //==================== PID > Chamber Temperature Control ====================
 //===========================================================================

config/examples/CTC/A13/Configuration.h

@@ -791,6 +791,9 @@
   //#define BED_LIMIT_SWITCHING   // Keep the bed temperature within BED_HYSTERESIS of the target
 #endif
 
+// Add 'M190 R T' for more gradual M190 R bed cooling.
+//#define BED_ANNEALING_GCODE
+
 //===========================================================================
 //==================== PID > Chamber Temperature Control ====================
 //===========================================================================

config/examples/CTC/Bizer/Configuration.h

@@ -790,6 +790,9 @@
   //#define BED_LIMIT_SWITCHING   // Keep the bed temperature within BED_HYSTERESIS of the target
 #endif
 
+// Add 'M190 R T' for more gradual M190 R bed cooling.
+//#define BED_ANNEALING_GCODE
+
 //===========================================================================
 //==================== PID > Chamber Temperature Control ====================
 //===========================================================================

config/examples/CTC/i3 2560 Rev A/no probe/Configuration.h

@@ -791,6 +791,9 @@
   //#define BED_LIMIT_SWITCHING   // Keep the bed temperature within BED_HYSTERESIS of the target
 #endif
 
+// Add 'M190 R T' for more gradual M190 R bed cooling.
+//#define BED_ANNEALING_GCODE
+
 //===========================================================================
 //==================== PID > Chamber Temperature Control ====================
 //===========================================================================

config/examples/Cartesio/Configuration.h

@@ -806,6 +806,9 @@
   //#define BED_LIMIT_SWITCHING   // Keep the bed temperature within BED_HYSTERESIS of the target
 #endif
 
+// Add 'M190 R T' for more gradual M190 R bed cooling.
+//#define BED_ANNEALING_GCODE
+
 //===========================================================================
 //==================== PID > Chamber Temperature Control ====================
 //===========================================================================

config/examples/Copymaster3D/300/Configuration.h

@@ -791,6 +791,9 @@
   //#define BED_LIMIT_SWITCHING   // Keep the bed temperature within BED_HYSTERESIS of the target
 #endif
 
+// Add 'M190 R T' for more gradual M190 R bed cooling.
+//#define BED_ANNEALING_GCODE
+
 //===========================================================================
 //==================== PID > Chamber Temperature Control ====================
 //===========================================================================

config/examples/Copymaster3D/400/Configuration.h

@@ -790,6 +790,9 @@
   //#define BED_LIMIT_SWITCHING   // Keep the bed temperature within BED_HYSTERESIS of the target
 #endif
 
+// Add 'M190 R T' for more gradual M190 R bed cooling.
+//#define BED_ANNEALING_GCODE
+
 //===========================================================================
 //==================== PID > Chamber Temperature Control ====================
 //===========================================================================

config/examples/Copymaster3D/500/Configuration.h

@@ -791,6 +791,9 @@
   //#define BED_LIMIT_SWITCHING   // Keep the bed temperature within BED_HYSTERESIS of the target
 #endif
 
+// Add 'M190 R T' for more gradual M190 R bed cooling.
+//#define BED_ANNEALING_GCODE
+
 //===========================================================================
 //==================== PID > Chamber Temperature Control ====================
 //===========================================================================

config/examples/Creality/CR-10 Max/Configuration.h

@@ -790,6 +790,9 @@
   //#define BED_LIMIT_SWITCHING   // Keep the bed temperature within BED_HYSTERESIS of the target
 #endif
 
+// Add 'M190 R T' for more gradual M190 R bed cooling.
+//#define BED_ANNEALING_GCODE
+
 //===========================================================================
 //==================== PID > Chamber Temperature Control ====================
 //===========================================================================

config/examples/Creality/CR-10 Mini/BigTreeTech SKR Mini E3 2.0/Configuration.h

@@ -798,6 +798,9 @@
   //#define BED_LIMIT_SWITCHING   // Keep the bed temperature within BED_HYSTERESIS of the target
 #endif
 
+// Add 'M190 R T' for more gradual M190 R bed cooling.
+//#define BED_ANNEALING_GCODE
+
 //===========================================================================
 //==================== PID > Chamber Temperature Control ====================
 //===========================================================================

config/examples/Creality/CR-10 Mini/BigTreeTech SKR Mini E3 3.0/Configuration.h

@@ -798,6 +798,9 @@
   //#define BED_LIMIT_SWITCHING   // Keep the bed temperature within BED_HYSTERESIS of the target
 #endif
 
+// Add 'M190 R T' for more gradual M190 R bed cooling.
+//#define BED_ANNEALING_GCODE
+
 //===========================================================================
 //==================== PID > Chamber Temperature Control ====================
 //===========================================================================

config/examples/Creality/CR-10 Mini/CrealityV1/Configuration.h

@@ -799,6 +799,9 @@
   //#define BED_LIMIT_SWITCHING   // Keep the bed temperature within BED_HYSTERESIS of the target
 #endif
 
+// Add 'M190 R T' for more gradual M190 R bed cooling.
+//#define BED_ANNEALING_GCODE
+
 //===========================================================================
 //==================== PID > Chamber Temperature Control ====================
 //===========================================================================

config/examples/Creality/CR-10 Mini/MEEB-3DP/Configuration.h

@@ -790,6 +790,9 @@
   //#define BED_LIMIT_SWITCHING   // Keep the bed temperature within BED_HYSTERESIS of the target
 #endif
 
+// Add 'M190 R T' for more gradual M190 R bed cooling.
+//#define BED_ANNEALING_GCODE
+
 //===========================================================================
 //==================== PID > Chamber Temperature Control ====================
 //===========================================================================

config/examples/Creality/CR-10 S4/CrealityV1/Configuration.h

@@ -790,6 +790,9 @@
   //#define BED_LIMIT_SWITCHING   // Keep the bed temperature within BED_HYSTERESIS of the target
 #endif
 
+// Add 'M190 R T' for more gradual M190 R bed cooling.
+//#define BED_ANNEALING_GCODE
+
 //===========================================================================
 //==================== PID > Chamber Temperature Control ====================
 //===========================================================================

config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 1.2 with TFT35 E3 V3.0/Configuration.h

@@ -790,6 +790,9 @@
   //#define BED_LIMIT_SWITCHING   // Keep the bed temperature within BED_HYSTERESIS of the target
 #endif
 
+// Add 'M190 R T' for more gradual M190 R bed cooling.
+//#define BED_ANNEALING_GCODE
+
 //===========================================================================
 //==================== PID > Chamber Temperature Control ====================
 //===========================================================================

config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 v3/Configuration.h

@@ -789,6 +789,9 @@
   //#define BED_LIMIT_SWITCHING   // Keep the bed temperature within BED_HYSTERESIS of the target
 #endif
 
+// Add 'M190 R T' for more gradual M190 R bed cooling.
+//#define BED_ANNEALING_GCODE
+
 //===========================================================================
 //==================== PID > Chamber Temperature Control ====================
 //===========================================================================

config/examples/Creality/CR-10 S5/CrealityV1/Configuration.h

@@ -790,6 +790,9 @@
   //#define BED_LIMIT_SWITCHING   // Keep the bed temperature within BED_HYSTERESIS of the target
 #endif
 
+// Add 'M190 R T' for more gradual M190 R bed cooling.
+//#define BED_ANNEALING_GCODE
+
 //===========================================================================
 //==================== PID > Chamber Temperature Control ====================
 //===========================================================================

config/examples/Creality/CR-10 S5/CrealityV2.2-BLTouch/Configuration.h

@@ -791,6 +791,9 @@
   //#define BED_LIMIT_SWITCHING   // Keep the bed temperature within BED_HYSTERESIS of the target
 #endif
 
+// Add 'M190 R T' for more gradual M190 R bed cooling.
+//#define BED_ANNEALING_GCODE
+
 //===========================================================================
 //==================== PID > Chamber Temperature Control ====================
 //===========================================================================

config/examples/Creality/CR-10 V2/Configuration.h

@@ -799,6 +799,9 @@
   //#define BED_LIMIT_SWITCHING   // Keep the bed temperature within BED_HYSTERESIS of the target
 #endif
 
+// Add 'M190 R T' for more gradual M190 R bed cooling.
+//#define BED_ANNEALING_GCODE
+
 //===========================================================================
 //==================== PID > Chamber Temperature Control ====================
 //===========================================================================

config/examples/Creality/CR-10 V3/Configuration.h

@@ -799,6 +799,9 @@
   //#define BED_LIMIT_SWITCHING   // Keep the bed temperature within BED_HYSTERESIS of the target
 #endif
 
+// Add 'M190 R T' for more gradual M190 R bed cooling.
+//#define BED_ANNEALING_GCODE
+
 //===========================================================================
 //==================== PID > Chamber Temperature Control ====================
 //===========================================================================

config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 2.0/Configuration.h

@@ -789,6 +789,9 @@
   //#define BED_LIMIT_SWITCHING   // Keep the bed temperature within BED_HYSTERESIS of the target
 #endif
 
+// Add 'M190 R T' for more gradual M190 R bed cooling.
+//#define BED_ANNEALING_GCODE
+
 //===========================================================================
 //==================== PID > Chamber Temperature Control ====================
 //===========================================================================

config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 3.0/Configuration.h

@@ -789,6 +789,9 @@
   //#define BED_LIMIT_SWITCHING   // Keep the bed temperature within BED_HYSTERESIS of the target
 #endif
 
+// Add 'M190 R T' for more gradual M190 R bed cooling.
+//#define BED_ANNEALING_GCODE
+
 //===========================================================================
 //==================== PID > Chamber Temperature Control ====================
 //===========================================================================

config/examples/Creality/CR-10/CrealityV1/Configuration.h

@@ -790,6 +790,9 @@
   //#define BED_LIMIT_SWITCHING   // Keep the bed temperature within BED_HYSTERESIS of the target
 #endif
 
+// Add 'M190 R T' for more gradual M190 R bed cooling.
+//#define BED_ANNEALING_GCODE
+
 //===========================================================================
 //==================== PID > Chamber Temperature Control ====================
 //===========================================================================

config/examples/Creality/CR-10S Pro/Configuration.h

@@ -790,6 +790,9 @@
   //#define BED_LIMIT_SWITCHING   // Keep the bed temperature within BED_HYSTERESIS of the target
 #endif
 
+// Add 'M190 R T' for more gradual M190 R bed cooling.
+//#define BED_ANNEALING_GCODE
+
 //===========================================================================
 //==================== PID > Chamber Temperature Control ====================
 //===========================================================================

config/examples/Creality/CR-10S/BigTreeTech SKR 1.4 Turbo TMC2209/Configuration.h

@@ -790,6 +790,9 @@
   //#define BED_LIMIT_SWITCHING   // Keep the bed temperature within BED_HYSTERESIS of the target
 #endif
 
+// Add 'M190 R T' for more gradual M190 R bed cooling.
+//#define BED_ANNEALING_GCODE
+
 //===========================================================================
 //==================== PID > Chamber Temperature Control ====================
 //===========================================================================

config/examples/Creality/CR-10S/BigTreeTech SKR 2.0 TMC2209/Configuration.h

@@ -790,6 +790,9 @@
   //#define BED_LIMIT_SWITCHING   // Keep the bed temperature within BED_HYSTERESIS of the target
 #endif
 
+// Add 'M190 R T' for more gradual M190 R bed cooling.
+//#define BED_ANNEALING_GCODE
+
 //===========================================================================
 //==================== PID > Chamber Temperature Control ====================
 //===========================================================================

config/examples/Creality/CR-10S/BigTreeTech SKR Mini E3 2.0/Configuration.h

@@ -791,6 +791,9 @@
   //#define BED_LIMIT_SWITCHING   // Keep the bed temperature within BED_HYSTERESIS of the target
 #endif
 
+// Add 'M190 R T' for more gradual M190 R bed cooling.
+//#define BED_ANNEALING_GCODE
+
 //===========================================================================
 //==================== PID > Chamber Temperature Control ====================
 //===========================================================================

config/examples/Creality/CR-10S/BigTreeTech SKR Pro v1.2/Configuration.h

@@ -790,6 +790,9 @@
   //#define BED_LIMIT_SWITCHING   // Keep the bed temperature within BED_HYSTERESIS of the target
 #endif
 
+// Add 'M190 R T' for more gradual M190 R bed cooling.
+//#define BED_ANNEALING_GCODE
+
 //===========================================================================
 //==================== PID > Chamber Temperature Control ====================
 //===========================================================================

config/examples/Creality/CR-10S/CrealityV1/Configuration.h

@@ -790,6 +790,9 @@
   //#define BED_LIMIT_SWITCHING   // Keep the bed temperature within BED_HYSTERESIS of the target
 #endif
 
+// Add 'M190 R T' for more gradual M190 R bed cooling.
+//#define BED_ANNEALING_GCODE
+
 //===========================================================================
 //==================== PID > Chamber Temperature Control ====================
 //===========================================================================

config/examples/Creality/CR-20 Pro/Configuration.h

@@ -791,6 +791,9 @@
   //#define BED_LIMIT_SWITCHING   // Keep the bed temperature within BED_HYSTERESIS of the target
 #endif
 
+// Add 'M190 R T' for more gradual M190 R bed cooling.
+//#define BED_ANNEALING_GCODE
+
 //===========================================================================
 //==================== PID > Chamber Temperature Control ====================
 //===========================================================================

config/examples/Creality/CR-20/RepRapWorld Minitronics20/Configuration.h

@@ -791,6 +791,9 @@
   //#define BED_LIMIT_SWITCHING   // Keep the bed temperature within BED_HYSTERESIS of the target
 #endif
 
+// Add 'M190 R T' for more gradual M190 R bed cooling.
+//#define BED_ANNEALING_GCODE
+
 //===========================================================================
 //==================== PID > Chamber Temperature Control ====================
 //===========================================================================

config/examples/Creality/CR-20/Stock/Configuration.h

@@ -791,6 +791,9 @@
   //#define BED_LIMIT_SWITCHING   // Keep the bed temperature within BED_HYSTERESIS of the target
 #endif
 
+// Add 'M190 R T' for more gradual M190 R bed cooling.
+//#define BED_ANNEALING_GCODE
+
 //===========================================================================
 //==================== PID > Chamber Temperature Control ====================
 //===========================================================================

config/examples/Creality/CR-30 PrintMill/Configuration.h

@@ -790,6 +790,9 @@
   //#define BED_LIMIT_SWITCHING   // Keep the bed temperature within BED_HYSTERESIS of the target
 #endif
 
+// Add 'M190 R T' for more gradual M190 R bed cooling.
+//#define BED_ANNEALING_GCODE
+
 //===========================================================================
 //==================== PID > Chamber Temperature Control ====================
 //===========================================================================

config/examples/Creality/CR-6 SE/Configuration.h

@@ -790,6 +790,9 @@
   //#define BED_LIMIT_SWITCHING   // Keep the bed temperature within BED_HYSTERESIS of the target
 #endif
 
+// Add 'M190 R T' for more gradual M190 R bed cooling.
+//#define BED_ANNEALING_GCODE
+
 //===========================================================================
 //==================== PID > Chamber Temperature Control ====================
 //===========================================================================

config/examples/Creality/CR-8/Configuration.h

@@ -790,6 +790,9 @@
   //#define BED_LIMIT_SWITCHING   // Keep the bed temperature within BED_HYSTERESIS of the target
 #endif
 
+// Add 'M190 R T' for more gradual M190 R bed cooling.
+//#define BED_ANNEALING_GCODE
+
 //===========================================================================
 //==================== PID > Chamber Temperature Control ====================
 //===========================================================================

config/examples/Creality/Ender-2 Pro/CrealityV423/Configuration.h

@@ -790,6 +790,9 @@
   //#define BED_LIMIT_SWITCHING   // Keep the bed temperature within BED_HYSTERESIS of the target
 #endif
 
+// Add 'M190 R T' for more gradual M190 R bed cooling.
+//#define BED_ANNEALING_GCODE
+
 //===========================================================================
 //==================== PID > Chamber Temperature Control ====================
 //===========================================================================

config/examples/Creality/Ender-2/Configuration.h

@@ -791,6 +791,9 @@
   //#define BED_LIMIT_SWITCHING   // Keep the bed temperature within BED_HYSTERESIS of the target
 #endif
 
+// Add 'M190 R T' for more gradual M190 R bed cooling.
+//#define BED_ANNEALING_GCODE
+
 //===========================================================================
 //==================== PID > Chamber Temperature Control ====================
 //===========================================================================

config/examples/Creality/Ender-3 Max Neo/Configuration.h

@@ -791,6 +791,9 @@
   //#define BED_LIMIT_SWITCHING   // Keep the bed temperature within BED_HYSTERESIS of the target
 #endif
 
+// Add 'M190 R T' for more gradual M190 R bed cooling.
+//#define BED_ANNEALING_GCODE
+
 //===========================================================================
 //==================== PID > Chamber Temperature Control ====================
 //===========================================================================

config/examples/Creality/Ender-3 Max/Configuration.h

@@ -792,6 +792,9 @@
   //#define BED_LIMIT_SWITCHING   // Keep the bed temperature within BED_HYSTERESIS of the target
 #endif
 
+// Add 'M190 R T' for more gradual M190 R bed cooling.
+//#define BED_ANNEALING_GCODE
+
 //===========================================================================
 //==================== PID > Chamber Temperature Control ====================
 //===========================================================================

config/examples/Creality/Ender-3 Neo/Configuration.h

@@ -791,6 +791,9 @@
   //#define BED_LIMIT_SWITCHING   // Keep the bed temperature within BED_HYSTERESIS of the target
 #endif
 
+// Add 'M190 R T' for more gradual M190 R bed cooling.
+//#define BED_ANNEALING_GCODE
+
 //===========================================================================
 //==================== PID > Chamber Temperature Control ====================
 //===========================================================================

config/examples/Creality/Ender-3 Pro/BigTreeTech SKR 1.4 Turbo/Configuration.h

@@ -790,6 +790,9 @@
   //#define BED_LIMIT_SWITCHING   // Keep the bed temperature within BED_HYSTERESIS of the target
 #endif
 
+// Add 'M190 R T' for more gradual M190 R bed cooling.
+//#define BED_ANNEALING_GCODE
+
 //===========================================================================
 //==================== PID > Chamber Temperature Control ====================
 //===========================================================================

config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.0/Configuration.h

@@ -790,6 +790,9 @@
   //#define BED_LIMIT_SWITCHING   // Keep the bed temperature within BED_HYSTERESIS of the target
 #endif
 
+// Add 'M190 R T' for more gradual M190 R bed cooling.
+//#define BED_ANNEALING_GCODE
+
 //===========================================================================
 //==================== PID > Chamber Temperature Control ====================
 //===========================================================================

config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.2/Configuration.h

@@ -790,6 +790,9 @@
   //#define BED_LIMIT_SWITCHING   // Keep the bed temperature within BED_HYSTERESIS of the target
 #endif
 
+// Add 'M190 R T' for more gradual M190 R bed cooling.
+//#define BED_ANNEALING_GCODE
+
 //===========================================================================
 //==================== PID > Chamber Temperature Control ====================
 //===========================================================================

config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 2.0/Configuration.h

@@ -790,6 +790,9 @@
   //#define BED_LIMIT_SWITCHING   // Keep the bed temperature within BED_HYSTERESIS of the target
 #endif
 
+// Add 'M190 R T' for more gradual M190 R bed cooling.
+//#define BED_ANNEALING_GCODE
+
 //===========================================================================
 //==================== PID > Chamber Temperature Control ====================
 //===========================================================================

config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 3.0/Configuration.h

@@ -789,6 +789,9 @@
   //#define BED_LIMIT_SWITCHING   // Keep the bed temperature within BED_HYSTERESIS of the target
 #endif
 
+// Add 'M190 R T' for more gradual M190 R bed cooling.
+//#define BED_ANNEALING_GCODE
+
 //===========================================================================
 //==================== PID > Chamber Temperature Control ====================
 //===========================================================================

config/examples/Creality/Ender-3 Pro/CrealityV1/Configuration.h

@@ -791,6 +791,9 @@
   //#define BED_LIMIT_SWITCHING   // Keep the bed temperature within BED_HYSTERESIS of the target
 #endif
 
+// Add 'M190 R T' for more gradual M190 R bed cooling.
+//#define BED_ANNEALING_GCODE
+
 //===========================================================================
 //==================== PID > Chamber Temperature Control ====================
 //===========================================================================

config/examples/Creality/Ender-3 Pro/CrealityV422/Configuration.h

@@ -790,6 +790,9 @@
   //#define BED_LIMIT_SWITCHING   // Keep the bed temperature within BED_HYSTERESIS of the target
 #endif
 
+// Add 'M190 R T' for more gradual M190 R bed cooling.
+//#define BED_ANNEALING_GCODE
+
 //===========================================================================
 //==================== PID > Chamber Temperature Control ====================
 //===========================================================================

config/examples/Creality/Ender-3 Pro/CrealityV427/Configuration.h

@@ -791,6 +791,9 @@
   //#define BED_LIMIT_SWITCHING   // Keep the bed temperature within BED_HYSTERESIS of the target
 #endif
 
+// Add 'M190 R T' for more gradual M190 R bed cooling.
+//#define BED_ANNEALING_GCODE
+
 //===========================================================================
 //==================== PID > Chamber Temperature Control ====================
 //===========================================================================

config/examples/Creality/Ender-3 S1 Plus/Configuration.h

@@ -791,6 +791,9 @@
   //#define BED_LIMIT_SWITCHING   // Keep the bed temperature within BED_HYSTERESIS of the target
 #endif
 
+// Add 'M190 R T' for more gradual M190 R bed cooling.
+//#define BED_ANNEALING_GCODE
+
 //===========================================================================
 //==================== PID > Chamber Temperature Control ====================
 //===========================================================================